1996 ICF program overview

International Nuclear Information System (INIS)

Correll, D

1996-01-01

The continuing objective of the Inertial Confinement Fusion (ICF) Program is the demonstration of thermonuclear fusion ignition and energy gain in the laboratory. The underlying theme of all ICF activities as a science research and development program is the Department of Energy's (DOE's) Defense Programs (DP) science-based Stockpile Stewardship and Management (SSM) Program. The extension of current program research capabilities in the National Ignition Facility (NIF) is necessary for the ICF Program to satisfy its stewardship responsibilities. ICF resources (people and facilities) are increasingly being redirected in support of the performance, schedule, and cost goals of the NIF. One of the more important aspects of ICF research is the national nature of the program. Lawrence Livermore National Laboratory's (LLNL's) ICF Program falls within DOE's national ICF Program, which includes the Nova and Beamlet laser facilities at LLNL and the OMEGA, Nike, and Trident laser facilities at the University of Rochester (Laboratory for Laser Energetics, UR/LLE), the Naval Research Laboratory (NRL), and Los Alamos National Laboratory (LANL), respectively. The Particle Beam Fusion Accelerator (PBFA) and Saturn pulsed-power facilities are at Sandia National Laboratories (SNL). General Atomics, Inc. (GA) develops and provides many of the targets for the above experimental facilities. LLNL's ICF Program supports activities in two major interrelated areas: (1) target physics and technology (experimental, theoretical, and computational research); and (2) laser science and optics technology development. Experiments on LLNL's Nova laser primarily support ignition and weapons physics research. Experiments on LLNL's Beamlet laser support laser science and optics technology development. In addition, ICF sciences and technologies, developed as part of the DP mission goals, continue to support additional DOE objectives. These objectives are (1) to achieve diversity in energy sources

Light ion beam approach to ICF ignition, gain, and energy production

International Nuclear Information System (INIS)

Olson, R.; Allshouse, G.; Cook, D.

1993-01-01

The US Department of Energy is supporting research oriented toward both near-term defense applications as well as long-term energy applications of inertial confinement fusion (ICF). The ICF programs at Sandia National Laboratories (SNL) is directed toward validating light ions as an efficient driver for these applications. The light ion laboratory microfusion facility (LMF) is envisioned as a facility in which high gain ICF targets could be developed and utilized in defense-related experiments. The LIBRA light ion beam commercial reactor study provides a baseline approach towards the use of the high gain light ion ICF technology as a source of commercial electrical energy

Light ion beam approach to ICF ignition, gain, and energy production

International Nuclear Information System (INIS)

Olson, R.; Allshouse, G.; Cook, D.

1994-01-01

The U.S. Department of Energy is supporting research oriented toward both near-term defense applications as well as long-term energy applications of inertial confinement fusion (ICF). The ICF program at Sandia National Laboratories (SNL) is directed toward validating light ions as an efficient driver for these applications. The light ion laboratory microfusion facility (LMF) is envisioned as a facility in which high gain ICF targets could be developed and utilized in defense-related experiments. The LIBRA light ion beam commercial reactor study provides a baseline approach towards the use of the high gain light ion ICF technology as a source of commercial electrical energy. (author)

Using the ICF in Ireland.

LENUS (Irish Health Repository)

Good, Anne

2011-05-01

This paper reflects on the use of ICF in Ireland, taking as a case study the experience of the first National Disability Survey (NDS). There were four clear effects in Ireland of using ICF as a framework for the NDS: a) that a broader range of people with disabilities was encompassed; b) that the environmental factors included from the ICF were comprehensive and policy relevant; c) that both barriers and facilitators were incorporated into the model; and d) that a focus on research ethics was encouraged. Some general conclusions regarding the benefits and limitations of ICF based on this experience are also drawn.

Development of a Z-pinch-driven ICF hohlraum concept on Z

International Nuclear Information System (INIS)

Cuneo, M.E.; Porter, J.L. Jr.; Vesey, R.A.

1999-01-01

Recent development of high power z-pinches (> 150 MW) on the Z driver has permitted the study of high-temperature, radiation-driven hohlraums. Three complementary, Z-pinch source-hohlraum-ICF capsule configurations are being developed to harness the x-ray output of these Z-pinch's. These are the dynamic-hohlraum, static-wall hohlraum, and Z-pinch-driven hohlraum concepts. Each has different potential strengths and concerns. In this paper, the authors report on the first experiments with the Z-pinch-driven hohlraum (ZPDH) concept. A high-yield ICF capsule design for this concept appears feasible, when driven by z-pinches from a 60 MA-class driver. Initial experiments characterize the behavior of the spoke array on Z-pinch performance and x-ray transmission, and the uniformity of radiation flux incident on a foam capsule in the secondary, for a single-sided drive. Measurements of x-ray wall re-emission power and spectrum, radiation temperatures, spoke-plasma location, and drive uniformity will be presented and compared with 0-D energetics, 2-D Lasnex rad-hydro, and 3-D radiosity calculations of energy transport and drive uniformity

Development of a Z-pinch-driven ICF hohlraum concept on Z

Energy Technology Data Exchange (ETDEWEB)

Cuneo, M E; Porter, Jr, J L; Vesey, R A [and others

1999-07-01

Recent development of high power z-pinches (> 150 MW) on the Z driver has permitted the study of high-temperature, radiation-driven hohlraums. Three complementary, Z-pinch source-hohlraum-ICF capsule configurations are being developed to harness the x-ray output of these Z-pinch's. These are the dynamic-hohlraum, static-wall hohlraum, and Z-pinch-driven hohlraum concepts. Each has different potential strengths and concerns. In this paper, the authors report on the first experiments with the Z-pinch-driven hohlraum (ZPDH) concept. A high-yield ICF capsule design for this concept appears feasible, when driven by z-pinches from a 60 MA-class driver. Initial experiments characterize the behavior of the spoke array on Z-pinch performance and x-ray transmission, and the uniformity of radiation flux incident on a foam capsule in the secondary, for a single-sided drive. Measurements of x-ray wall re-emission power and spectrum, radiation temperatures, spoke-plasma location, and drive uniformity will be presented and compared with 0-D energetics, 2-D Lasnex rad-hydro, and 3-D radiosity calculations of energy transport and drive uniformity.

Equilibrium ignition for ICF capsules

International Nuclear Information System (INIS)

Lackner, K.S.; Colgate, S.A.; Johnson, N.L.; Kirkpatrick, R.C.; Menikoff, R.; Petschek, A.G.

1993-01-01

There are two fundamentally different approaches to igniting DT fuel in an ICF capsule which can be described as equilibrium and hot spot ignition. In both cases, a capsule which can be thought of as a pusher containing the DT fuel is imploded until the fuel reaches ignition conditions. In comparing high-gain ICF targets using cryogenic DT for a pusher with equilibrium ignition targets using high-Z pushers which contain the radiation. The authors point to the intrinsic advantages of the latter. Equilibrium or volume ignition sacrifices high gain for lower losses, lower ignition temperature, lower implosion velocity and lower sensitivity of the more robust capsule to small fluctuations and asymmetries in the drive system. The reduction in gain is about a factor of 2.5, which is small enough to make the more robust equilibrium ignition an attractive alternative

Hydrodynamic instabilities in astrophysics and ICF

International Nuclear Information System (INIS)

Paul Drake, R.

2005-01-01

Inertial fusion systems and astrophysical systems both involve hydrodynamic effects, including sources of pressure, shock waves, rarefactions, and plasma flows. In the evolution of such systems, hydrodynamic instabilities naturally evolve. As a result, a fundamental understanding of hydrodynamic instabilities is necessary to understand their behavior. In addition, high-energy-density facilities designed for ICF purposes can be used to provide and experimental basis for understanding astrophysical processes. In this talk. I will discuss the instabilities that appear in astrophysics and ICF from the common perspective of the basic mechanisms at work. Examples will be taken from experiments aimed at ICF, from astrophysical systems, and from experiments using ICF systems to address issues in astrophysics. The high-energy-density research facilities of today can accelerate small but macroscopic amounts of material to velocities above 100 km/s, can heat such material to temperature above 100 eV, can produce pressures far above a million atmospheres (10''12 dybes/cm''2 or 0.1 TPascal), and can do experiments under these conditions that address basic physics issues. This enables on to devise experiments aimed directly at important process such as the Rayleigh Taylor instability at an ablating surface or at an embedded interface that is accelerating, the Richtmeyer Meshkov evolution of shocked interfaces, and the Kelvin-Helmholtz instability of shear flows. The talk will include examples of such phenomena from the laboratory and from astrophysics, and will discuss experiments to study them. (Author)

Magnetron co-sputtering system for coating ICF targets

International Nuclear Information System (INIS)

Hsieh, E.J.; Meyer, S.F.; Halsey, W.G.; Jameson, G.T.; Wittmayer, F.J.

1981-01-01

Fabrication of Inertial Confinement Fusion (ICF) targets requires deposition of various types of coatings on microspheres. The mechanical strength, and surface finish of the coatings are of concern in ICF experiments. The tensile strength of coatings can be controlled through grain refinement, selective doping and alloy formation. We have constructed a magnetron co-sputtering system to produce variable density profile coatings with high tensile strength on microspheres

Towards ICF implementation in menopause healthcare: a systematic review of ICF application in Switzerland.

Science.gov (United States)

Zangger, Martina; Poethig, Dagmar; Meissner, Florian; von Wolff, Michael; Stute, Petra

2017-12-28

To present a systematic literature review on the application and degree of implementation of the International Classification of Functioning, Disability and Health (ICF) across different health conditions and regions in Switzerland in order to develop an ICF classification of the climacteric syndrome in the medium term. A systematic literature search was conducted through Embase and Medline covering the period between 2011 and August 2016. Inclusion criteria were the term ICF in title or abstract and Switzerland as the workplace of the first author. Identified publications were analysed as descriptive statistics. A total of 83 articles were included in the analysis. Forty-seven different first authors from 24 different institutions were identified. The majority of publications were from Swiss Paraplegic Research (68.7%) and focused on neurology (31.3%). Forty-six cohort studies were identified. In most of them, the ICF was used to set up a general language for comparing patients' information (82.9%). Only one paper from the medical specialty gynaecology was identified; this was on breast cancer. No paper on the menopause was found. In Switzerland, the ICF is actively used in various areas of healthcare, especially in the field of neurology and rehabilitation. There is a need for ICF core sets in other medical fields, such as menopause healthcare, in order to accomplish the goal of the European Menopause and Andropause Society, which is a healthcare model for healthy menopause and aging.

Contributions to the Genesis and Progress of ICF

International Nuclear Information System (INIS)

Nuckolls, J.H.

2006-01-01

Inertial confinement fusion (ICF) has progressed from the detonation of large-scale fusion explosions initiated by atomic bombs in the early 1950s to final preparations for initiating small-scale fusion explosions with giant lasers. The next major step after ignition will be development of high performance targets that can be initiated with much smaller, lower cost lasers. In the 21st century and beyond, ICF's grand challenge is to develop practical power plants that generate low cost, clean, inexhaustible fusion energy. In this chapter, I first describe the origin in 1960-61 of ICF target concepts, early speculations on laser driven 'Thermonuclear Engines' for power production and rocket propulsion, and encouraging large-scale nuclear explosive experiments conducted in 1962. Next, I recall the 40-year, multi-billion dollar ignition campaign - to develop a matched combination of sufficiently high-performance implosion lasers and sufficiently stable targets capable of igniting small fusion explosions. I conclude with brief comments on the NIF ignition campaign and very high-performance targets, and speculations on ICF's potential in a centuries-long Darwinian competition of future energy systems. My perspectives in this chapter are those of a nuclear explosive designer, optimistic proponent of ICF energy, and Livermore Laboratory leader. The perspectives of Livermore's post 1970 laser experts and builders, and laser fusion experimentalists are provided in a chapter written by John Holzrichter, a leading scientist and leader in Livermore's second generation laser fusion program. In a third chapter, Ray Kidder, a theoretical physicist and early laser fusion pioneer, provides his perspectives including the history of the first generation laser fusion program he led from 1962-1972.

ICF-based classification and measurement of functioning.

Science.gov (United States)

Stucki, G; Kostanjsek, N; Ustün, B; Cieza, A

2008-09-01

If we aim towards a comprehensive understanding of human functioning and the development of comprehensive programs to optimize functioning of individuals and populations we need to develop suitable measures. The approval of the International Classification, Disability and Health (ICF) in 2001 by the 54th World Health Assembly as the first universally shared model and classification of functioning, disability and health marks, therefore an important step in the development of measurement instruments and ultimately for our understanding of functioning, disability and health. The acceptance and use of the ICF as a reference framework and classification has been facilitated by its development in a worldwide, comprehensive consensus process and the increasing evidence regarding its validity. However, the broad acceptance and use of the ICF as a reference framework and classification will also depend on the resolution of conceptual and methodological challenges relevant for the classification and measurement of functioning. This paper therefore describes first how the ICF categories can serve as building blocks for the measurement of functioning and then the current state of the development of ICF based practical tools and international standards such as the ICF Core Sets. Finally it illustrates how to map the world of measures to the ICF and vice versa and the methodological principles relevant for the transformation of information obtained with a clinical test or a patient-oriented instrument to the ICF as well as the development of ICF-based clinical and self-reported measurement instruments.

ICF ETF and its engineering development requirements

International Nuclear Information System (INIS)

Blink, J.A.; Allen, W.O.; Billman, K.

1980-10-01

Inertial confinement fusion driver development and ICF target physics are being intensively explored both theoretically and experimentally. However, engineering considerations of harnessing the fusion energy pulses that are an ultimate product and goal of the ICF physics program are only being addressed on a small scale. Experience with development of other new technologies indicates that engineering development time will be substantial for ICF energy converters. The authors met at Livermore in July 1980 to form an ICF Reactor Technology Working Group to address this issue. This paper outlines the current state of planning for an ICF Engineering Test Facility (ETF) and the engineering development that must precede it

Hydrodynamick instabilities on ICF capsules

International Nuclear Information System (INIS)

Haan, S.W.

1991-01-01

This article summarizes our current understanding of hydrodynamic instabilities as relevant to ICF. First we discuss classical, single mode Rayleigh-Taylor instability, and nonlinear effects in the evolution of a single mode. Then we discuss multimode systems, considering: (1) the onset of nonlinearity; (2) a second order mode coupling theory for weakly nonlinear effects, and (3) the fully nonlinear regime. Two stabilization mechanisms relevant to ICF are described next: gradient scale length and convective stabilization. Then we describe a model which is meant to estimate the weakly nonlinear evolution of multi-mode systems as relevant to ICF, given the short-wavelength stabilization. Finally, we discuss the relevant code simulation capability, and experiments. At this time we are quite optimistic about our ability to estimate instability growth on ICF capsules, but further experiments and simulations are needed to verify the modeling. 52 refs

[ICF-Checklist to Evaluate Inclusion of Elderlies with Intellectual Disability - Psychometric Properties].

Science.gov (United States)

Queri, Silvia; Eggart, Michael; Wendel, Maren; Peter, Ulrike

2017-11-28

Background An instrument should have been developed to measure participation as one possible criterion to evaluate inclusion of elderly people with intellectual disability. The ICF was utilized, because participation is one part of health related functioning, respectively disability. Furthermore ICF includes environmental factors (contextual factors) and attaches them an essentially influence on health related functioning, in particular on participation. Thus ICF Checklist additionally identifies environmental barriers for elimination. Methodology A linking process with VINELAND-II yielded 138 ICF items for the Checklist. The sample consists of 50 persons with a light or moderate intellectual disability. Two-thirds are female and the average age is 68. They were directly asked about their perceived quality of life. Additionally, proxy interviews were carried out with responsible staff members concerning necessary support and behavioral deviances. The ICF Checklist was administered twice, once (t2) the current staff member should rate health related functioning at the given time and in addition, a staff member who knows the person at least 10 years before (t1) should rate the former functioning. Content validity was investigated with factor analysis and criterion validity with correlational analysis related to supports need, behavioral deviances and perceived quality of life. Quantitative analysis was validated by qualitative content analysis of patient documentation. Results Factor analysis shows logical variable clusters across the extracted factors but neither interpretable factors. The Checklist is reliable, valid related to the chosen criterions and shows the expected age-related shifts. Qualitative analysis corresponds with quantitative data. Consequences/Conclusion ICF Checklist is appropriate to manage and evaluate patient-centered care. © Georg Thieme Verlag KG Stuttgart · New York.

Multiuser development scenario for ICF

International Nuclear Information System (INIS)

Hogan, W.J.

1985-10-01

An outline is given of some of the various possible applications of ICF technology. Developmental paths for each application are briefly described. The implications on design and operation of the ICF facilities if multipurpose use is allowed are examined

Contributions to the Genesis and Progress of ICF

Energy Technology Data Exchange (ETDEWEB)

Nuckolls, J H

2006-02-15

Inertial confinement fusion (ICF) has progressed from the detonation of large-scale fusion explosions initiated by atomic bombs in the early 1950s to final preparations for initiating small-scale fusion explosions with giant lasers. The next major step after ignition will be development of high performance targets that can be initiated with much smaller, lower cost lasers. In the 21st century and beyond, ICF's grand challenge is to develop practical power plants that generate low cost, clean, inexhaustible fusion energy. In this chapter, I first describe the origin in 1960-61 of ICF target concepts, early speculations on laser driven 'Thermonuclear Engines' for power production and rocket propulsion, and encouraging large-scale nuclear explosive experiments conducted in 1962. Next, I recall the 40-year, multi-billion dollar ignition campaign - to develop a matched combination of sufficiently high-performance implosion lasers and sufficiently stable targets capable of igniting small fusion explosions. I conclude with brief comments on the NIF ignition campaign and very high-performance targets, and speculations on ICF's potential in a centuries-long Darwinian competition of future energy systems. My perspectives in this chapter are those of a nuclear explosive designer, optimistic proponent of ICF energy, and Livermore Laboratory leader. The perspectives of Livermore's post 1970 laser experts and builders, and laser fusion experimentalists are provided in a chapter written by John Holzrichter, a leading scientist and leader in Livermore's second generation laser fusion program. In a third chapter, Ray Kidder, a theoretical physicist and early laser fusion pioneer, provides his perspectives including the history of the first generation laser fusion program he led from 1962-1972.

A TDC module used in nTOF of ICF

International Nuclear Information System (INIS)

Zhang Yuehua; Li Feng; Jin Ge; Yu Xiaoqi; Jiang Xiao

2007-01-01

Neutron time-of-flight (TOF) can provide important information about the fuel-ion burn temperature in various inertial-confinement-fusion (ICF) target designs. The sensitive neutron detector array is used to increase sensitivity while maintaining good time resolution for low-yield targets. It has been a standard technique to diagnose the average density-radius product(pR), which is a very important parameter in ICF experiments. The time resolution of the sensitive neutron detector array which will be used in 'Shen Guang III' system is expected to be 1 ns, and the one of the electronic system connected with the detectors is 100 ps. Based on the next generation of TDCs from ACAM, TDC-GP2, a VME-plug-in multi-chanel TDC module, with a time-resolution of less than 61 ps, has been designed. (authors)

Advanced power flow technologies for high current ICF accelerators

International Nuclear Information System (INIS)

VanDevender, J.P.; McDaniel, D.H.

1978-01-01

Two new technologies for raising the power density in high current, inertial confinement fusion accelerators have been developed in the past two years. Magnetic flashover inhibition utilizes the self-magnetic fields around the vacuum insulator surface to inhibit surface flashover; average electric fields of 40 Mv/m at magnetic fields of 1.1 T have been achieved. Self-magnetic insulation of long, vacuum transmission lines has been used to transport power at 1.6 x 10 14 W/m 2 over six meters and up to 1.6 x 10 15 W/m 2 over short distances in a radial anode-cathode feed. The recent data relevant to these new technologies and their implications for ICF will be explored

Exploring use of the ICF in health education.

Science.gov (United States)

Bornbaum, Catherine C; Day, Adam M B; Izaryk, Kristen; Morrison, Stephanie J; Ravenek, Michael J; Sleeth, Lindsay E; Skarakis-Doyle, Elizabeth

2015-01-01

Currently, little is known regarding use of the International Classification of Functioning, Disability and Health (ICF) in health education applications. Therefore, this review sought to examine the scope of work that has been conducted regarding the application of the ICF in health education. A review of the current literature related to use of the ICF in health education programs was conducted. Twelve electronic databases were searched in accordance with a search protocol developed by a health sciences librarian. In total, 17,878 records were reviewed, and 18 articles met the criteria for inclusion in this review. Current evidence regarding use of the ICF in healthcare education revealed that program and participant properties can be essential facilitators or barriers to successful education programs. In addition, gaps in comprehensive outcome measurement were revealed as areas for future attention. Educational applications of the ICF are very much a work in progress as might be expected given the ICF's existence for only a little over a decade. To advance use of the ICF in education, it is important to incorporate the measurement of both knowledge acquisition and behavior change related to ICF-based programs. Ultimately, widespread implementation of the ICF represents not only a substantial opportunity but also poses a significant challenge.

Numerical modeling of ICF plasmas

Energy Technology Data Exchange (ETDEWEB)

Dahlburg, J.P.; Gardner, J.H.; Schmitt, A.J.; Colombant, D.; Klapisch, M.; Phillips, L.

1999-07-01

Radiation transport hydrodynamics codes play an important role in the design and development of ignition-regime and high-gain direct drive Inertial Confinement Fusion (ICF) pellets. In this concept, laser light is used to symmetrically implode a spherical pellet to sufficiently high densities and temperatures to achieve thermonuclear fusion. This requires a very symmetric illumination and a stable hydrodynamic implosion. Simulations of the dynamics of both planar and spherical targets are being performed to provide better understanding of how to control the Rayleigh-Taylor (RT) instability, using the 1-, 2- and 3-dimensional laser matter interaction (LMI) code FAST. To benchmark FAST, and the Super Transition Array material opacities used in the pellet design simulations, comparisons are being made with experimental data obtained in planar LMI experiments on the Naval Research Laboratory Nike KrF laser. One of the major efforts is to understand the behavior of the RT instability in planar laser-accelerated targets. Since this is one of the primary obstacles to successful ICF, experimental comparison is not only providing for code benchmarking, but will also lead to a better understanding of how to control this basic instability. Code benchmarking is also being performed using data from Nike opacity experiments, and from equation of state experiments in ICF-relevant regimes. In this talk they present an overview of FAST and a comparison of simulation results with data from ongoing laboratory experiments.

Numerical modeling of ICF plasmas

International Nuclear Information System (INIS)

Dahlburg, J.P.; Gardner, J.H.; Schmitt, A.J.; Colombant, D.; Klapisch, M.; Phillips, L.

1999-01-01

Radiation transport hydrodynamics codes play an important role in the design and development of ignition-regime and high-gain direct drive Inertial Confinement Fusion (ICF) pellets. In this concept, laser light is used to symmetrically implode a spherical pellet to sufficiently high densities and temperatures to achieve thermonuclear fusion. This requires a very symmetric illumination and a stable hydrodynamic implosion. Simulations of the dynamics of both planar and spherical targets are being performed to provide better understanding of how to control the Rayleigh-Taylor (RT) instability, using the 1-, 2- and 3-dimensional laser matter interaction (LMI) code FAST. To benchmark FAST, and the Super Transition Array material opacities used in the pellet design simulations, comparisons are being made with experimental data obtained in planar LMI experiments on the Naval Research Laboratory Nike KrF laser. One of the major efforts is to understand the behavior of the RT instability in planar laser-accelerated targets. Since this is one of the primary obstacles to successful ICF, experimental comparison is not only providing for code benchmarking, but will also lead to a better understanding of how to control this basic instability. Code benchmarking is also being performed using data from Nike opacity experiments, and from equation of state experiments in ICF-relevant regimes. In this talk they present an overview of FAST and a comparison of simulation results with data from ongoing laboratory experiments

ICF-DOC: the ICF dedicated checklist for evaluating functioning and disability in people with disorders of consciousness.

Science.gov (United States)

Leonardi, Matilde; Covelli, Venusia; Giovannetti, Ambra M; Raggi, Alberto; Sattin, Davide

2014-09-01

Clinicians need a comprehensive description of patients' functioning state to capture the complex interaction between symptoms and environmental factors, and to determine the actual level of functioning in patients in a vegetative state or a minimally conscious state. The aim of this study is to develop an International Classification of Functioning, Disability, and Health (ICF) checklist for patients with disorders of consciousness (DOC) so as to capture and describe, with a tailored list of categories, the most common health, disability, and functioning issues of adult patients with DOC. The WHO ICF checklist was used as a basis for collecting data. This was an observational, cross-sectional, multicenter study conducted in 69 Italian centers. Specific methodological procedures were used to identify the most appropriate categories for DOC patients to be added to or deleted from the ICF checklist so as to develop the ICF-DOC checklist. A total of 566 adult patients were enrolled: 398 in a vegetative state and 168 in a minimally conscious state. A total of 127 ICF categories reached the threshold of 20% concerning the presence of a problem: 37 categories from the body functions chapter, 13 from the body structures chapter, 46 from the activities and participations chapter, and 31 from the environmental factors chapter. ICF categories identified in this study can be useful guidelines for clinicians and researchers to collect data on functioning and disability of adult patients with DOC. The new ICF-DOC checklist allows monitoring of the effects of interventions on functional areas and possible changes in each patient in follow-up studies.

Progress and prospects for indirect drive ICF

International Nuclear Information System (INIS)

Lindl, J.D.

1992-08-01

During the past few years, a great deal of progress has been made toward demonstrating the requirements for ignition and high gain ICF targets. Because of this progress, the 1990 National Academy of Science (NAS) and Fusion Policy Advisory Committee (FPAC) reviews recommended that the US National ICF Program focus on the physics of ignition. Subject to successful completion of a series of experiments to be carried out on the Nova laser at Lawrence Livermore National Laboratory (LLNL), these reviews advocated construction of a 1 to 2 MJ glass laser, whose purpose would be demonstration of ignition and modest-gain ICF targets within about a decade. The LLNL proposal for this National Ignition Facility, which was endorsed by the NAS and FPAC as the most timely and cost effective path to this goal, is referred to as the ''Nova Upgrade.'' This paper reviews recent progress on the Nova laser and the performance expected with the Nova Upgrade

Transition from equilibrium ignition to non-equilibrium burn for ICF capsules surrounded by a high-Z pusher

International Nuclear Information System (INIS)

Li, Ji W.; Chang, Lei; Li, Yun S.; Li, Jing H.

2011-01-01

For the ICF capsule surrounded by a high-Z pusher which traps the radiation and confines the hot fuel, the fuel will first be ignited in thermal equilibrium with radiation at a much lower temperature than hot-spot ignition, which is also the low temperature ignition. Because of the lower areal density for ICF capsules, the equilibrium ignition must be developed into a non-equilibrium burn to shorten the reaction time and lower the drive energy. In this paper, the transition from the equilibrium ignition to non-equilibrium burn is discussed and the energy deposited by α particles required for the equilibrium ignition and non-equilibrium burn to occur is estimated.

Wetted foam liquid fuel ICF target experiments

International Nuclear Information System (INIS)

Olson, R E; Leeper, R J; Yi, S A; Kline, J L; Zylstra, A B; Peterson, R R; Shah, R; Braun, T; Biener, J; Kozioziemski, B J; Sater, J D; Biener, M M; Hamza, A V; Nikroo, A; Hopkins, L Berzak; Ho, D; LePape, S; Meezan, N B

2016-01-01

We are developing a new NIF experimental platform that employs wetted foam liquid fuel layer ICF capsules. We will use the liquid fuel layer capsules in a NIF sub-scale experimental campaign to explore the relationship between hot spot convergence ratio (CR) and the predictability of hot spot formation. DT liquid layer ICF capsules allow for flexibility in hot spot CR via the adjustment of the initial cryogenic capsule temperature and, hence, DT vapor density. Our hypothesis is that the predictive capability of hot spot formation is robust and 1D-like for a relatively low CR hot spot (CR∼15), but will become less reliable as hot spot CR is increased to CR>20. Simulations indicate that backing off on hot spot CR is an excellent way to reduce capsule instability growth and to improve robustness to low-mode x-ray flux asymmetries. In the initial experiments, we will test our hypothesis by measuring hot spot size, neutron yield, ion temperature, and burn width to infer hot spot pressure and compare to predictions for implosions with hot spot CR's in the range of 12 to 25. Larger scale experiments are also being designed, and we will advance from sub-scale to full-scale NIF experiments to determine if 1D-like behavior at low CR is retained as the scale-size is increased. The long-term objective is to develop a liquid fuel layer ICF capsule platform with robust thermonuclear burn, modest CR, and significant α-heating with burn propagation. (paper)

U.S. DOE driver development for ICF

International Nuclear Information System (INIS)

Sluyter, M.M.

1995-01-01

The goal of the Department of Energy (DOE) supported Inertial Confinement Fusion (ICF) Program is to produce pure fusion ignition with fusion yields of 200 to 1000 millions of joules, which could find several applications in the defence and in the electric power generation. The National Ignition Facility will operate in both direct and indirect driver modes, with a glass laser driver. However two other options have been developed to increase the energy efficiency: the Light Ion Pulsed Power program and the NIKE KrF laser. Heavy ion drivers are also investigated -Abstract only-. (TEC)

X-ray Thomson Scattering from Spherically Imploded ICF Ablators

Science.gov (United States)

Kritcher, Andrea; Doeppner, Tilo; Landen, Otto; Glenzer, Siegfried

2010-11-01

Time-resolved X-ray Thomson scattering measurements from spherically imploded inertial fusion capsules-type targets have been obtained for the first time at the Omega OMEGA laser facility to characterize the in-flight properties of ICF ablators. In these experiments, the non-collective, or microscopic particle behavior, of imploding CH and Be shells, was probed using a 9 keV Zn He-alpha x-ray source at scattering angles of 113^o and 135^o. for two drive pulse shapes.As an example, the analysis of In-flight scattering measurements from one set of directly-driven compressed 8600 μm-diameter, 40-μm thick Be shells taken (4.2 ns after the start of the compression beamswhen compressed a factor of 4.83x) yielded electron densities of ˜ 1.2±0.23x10^24cm-3, temperatures of ˜13±32 eV, and an ionization state of Be(+2), with uncertainties in the temperature and density of about 40% and 20%. These conditions resulting in an inferred adiabat (ratio of plasma pressure to Fermi degenerate pressure) of 1.797 +0.3/-.5 with an error of about 30%. The high signal-to-noise and high signal-to-background ratio of data obtained in these experiments provides a platform for studying the adiabat of other indirect-drive ICF ablators such as CH and High Density Carbon (HDC) ablators and demonstrates the viability of using this diagnostic to study the in-flight properties adiabat of implosion targets at the National Ignition Facility (NIF).

Advances in ICF power reactor design

International Nuclear Information System (INIS)

Hogan, W.J.; Kulcinski, G.L.

1985-01-01

Fifteen ICF power reactor design studies published since 1980 are reviewed to illuminate the design trends they represent. There is a clear, continuing trend toward making ICF reactors inherently safer and environmentally benign. Since this trend accentuates inherent advantages of ICF reactors, we expect it to be further emphasized in the future. An emphasis on economic competitiveness appears to be a somewhat newer trend. Lower cost of electricity, smaller initial size (and capital cost), and more affordable development paths are three of the issues being addressed with new studies

[The "Mini-ICF-Rating for Mental Disorders (Mini-ICF-P)". A short instrument for the assessment of disabilities in mental disorders].

Science.gov (United States)

Linden, M; Baron, S

2005-06-01

Supplementary to the description of diseases at symptom level, the International Classification of Functioning, Disability and Health (ICF), edited by the WHO, for the first time enables a systematic description also at the level of disabilities and impairments. The Mini-ICF-Rating for Mental Disorders (Mini-ICF-P) is a short observer rating instrument for the assessment of disabilities, especially with regard to occupational functioning. The Mini-ICF-P was first evaluated empirically in 125 patients of a Department of Behavioural Medicine and Psychosomatics. Parallel-test reliability was r = 0.59. Correlates were found with cognitive and motivational variables and duration of sick leave from work. In summary, the Mini-ICF-P is a quick and practicable instrument.

Towards ICF implementation in menopause healthcare: a systematic review of ICF application in Switzerland.

OpenAIRE

Zangger, Martina; Poethig, Dagmar; Meissner, Florian; von Wolff, Michael; Stute, Petra

2017-01-01

AIMS OF THE STUDY To present a systematic literature review on the application and degree of implementation of the International Classification of Functioning, Disability and Health (ICF) across different health conditions and regions in Switzerland in order to develop an ICF classification of the climacteric syndrome in the medium term. METHODS A systematic literature search was conducted through Embase and Medline covering the period between 2011 and August 2016. Inclusion crite...

Experimental Study of High-Z Gas Buffers in Gas-Filled ICF Engines

Energy Technology Data Exchange (ETDEWEB)

Rhodes, M A; Kane, J; Loosmore, G; DeMuth, J; Latkowski, J

2010-12-03

ICF power plants, such as the LIFE scheme at LLNL, may employ a high-Z, target-chamber gas-fill to moderate the first-wall heat-pulse due to x-rays and energetic ions released during target detonation. To reduce the uncertainties of cooling and beam/target propagation through such gas-filled chambers, we present a pulsed plasma source producing 2-5 eV plasma comprised of high-Z gases. We use a 5-kJ, 100-ns theta discharge for high peak plasma-heating-power, an electrode-less discharge for minimizing impurities, and unobstructed axial access for diagnostics and beam (and/or target) propagation studies. We will report on the plasma source requirements, design process, and the system design.

Status of Indirect Drive ICF Experiments on the National Ignition Facility

International Nuclear Information System (INIS)

Dewald, E.

2016-01-01

In the quest to demonstrate Inertial Confinement Fusion (ICF) ignition of deuterium-tritium (DT) filled capsules and propagating thermonuclear burn with net energy gain (fusion energy/laser energy >1), recent experiments on the National Ignition Facility (NIF) have shown progress towards increasing capsule hot spot temperature (T ion >5 keV) and fusion neutron yield (~10 16 ), while achieving ~2x yield amplification by alpha particle deposition. At the same time a performance cliff was reached, resulting in lower fusion yields than expected as the implosion velocity was increased. Ongoing studies of the hohlraum and capsule physics are attempting to disseminate possible causes for this performance ceiling.

Towards system-wide implementation of the International Classification of Functioning, Disability and Health (ICF) in routine practice: Developing simple, intuitive descriptions of ICF categories in the ICF Generic and Rehabilitation Set.

Science.gov (United States)

Prodinger, Birgit; Reinhardt, Jan D; Selb, Melissa; Stucki, Gerold; Yan, Tiebin; Zhang, Xia; Li, Jianan

2016-06-13

A national, multi-phase, consensus process to develop simple, intuitive descriptions of International Classification of Functioning, Disability and Health (ICF) categories contained in the ICF Generic and Rehabilitation Sets, with the aim of enhancing the utility of the ICF in routine clinical practice, is presented in this study. A multi-stage, national, consensus process was conducted. The consensus process involved 3 expert groups and consisted of a preparatory phase, a consensus conference with consecutive working groups and 3 voting rounds (votes A, B and C), followed by an implementation phase. In the consensus conference, participants first voted on whether they agreed that an initially developed proposal for simple, intuitive descriptions of an ICF category was in fact simple and intuitive. The consensus conference was held in August 2014 in mainland China. Twenty-one people with a background in physical medicine and rehabilitation participated in the consensus process. Four ICF categories achieved consensus in vote A, 16 in vote B, and 8 in vote C. This process can be seen as part of a larger effort towards the system-wide implementation of the ICF in routine clinical and rehabilitation practice to allow for the regular and comprehensive evaluation of health outcomes most relevant for the monitoring of quality of care.

ICF gamma-ray reaction history diagnostics

International Nuclear Information System (INIS)

Herrmann, H W; Young, C S; Mack, J M; Kim, Y H; McEvoy, A; Evans, S; Sedillo, T; Batha, S; Schmitt, M; Wilson, D C; Langenbrunner, J R; Malone, R; Kaufman, M I; Cox, B C; Frogget, B; Tunnell, T W; Miller, E K; Ali, Z A; Stoeffl, W; Horsfield, C J

2010-01-01

Reaction history measurements, such as nuclear bang time and burn width, are fundamental components of diagnosing ICF implosions and will be employed to help steer the National Ignition Facility (NIF) towards ignition. Fusion gammas provide a direct measure of nuclear interaction rate (unlike x-rays) without being compromised by Doppler spreading (unlike neutrons). Gas Cherenkov Detectors that convert fusion gamma rays to UV/visible Cherenkov photons for collection by fast optical recording systems have established their usefulness in illuminating ICF physics in several experimental campaigns at OMEGA. In particular, bang time precision better than 25 ps has been demonstrated, well below the 50 ps accuracy requirement defined by the NIF. NIF Gamma Reaction History (GRH) diagnostics are being developed based on optimization of sensitivity, bandwidth, dynamic range, cost, and NIF-specific logistics, requirements and extreme radiation environment. Implementation will occur in two phases. The first phase consists of four channels mounted to the outside of the target chamber at ∼6 m from target chamber center (GRH-6m) coupled to ultra-fast photo-multiplier tubes (PMT). This system is intended to operate in the 10 13 -10 17 neutron yield range expected during the early THD campaign. It will have high enough bandwidth to provide accurate bang times and burn widths for the expected THD reaction histories (> 80 ps fwhm). Successful operation of the first GRH-6m channel has been demonstrated at OMEGA, allowing a verification of instrument sensitivity, timing and EMI/background suppression. The second phase will consist of several channels located just inside the target bay shield wall at 15 m from target chamber center (GRH-15m) with optical paths leading through the cement shield wall to well-shielded streak cameras and PMTs. This system is intended to operate in the 10 16 -10 20 yield range expected during the DT ignition campaign, providing higher temporal resolution

ICF gamma-ray reaction history diagnostics

Science.gov (United States)

Herrmann, H. W.; Young, C. S.; Mack, J. M.; Kim, Y. H.; McEvoy, A.; Evans, S.; Sedillo, T.; Batha, S.; Schmitt, M.; Wilson, D. C.; Langenbrunner, J. R.; Malone, R.; Kaufman, M. I.; Cox, B. C.; Frogget, B.; Miller, E. K.; Ali, Z. A.; Tunnell, T. W.; Stoeffl, W.; Horsfield, C. J.; Rubery, M.

2010-08-01

Reaction history measurements, such as nuclear bang time and burn width, are fundamental components of diagnosing ICF implosions and will be employed to help steer the National Ignition Facility (NIF) towards ignition. Fusion gammas provide a direct measure of nuclear interaction rate (unlike x-rays) without being compromised by Doppler spreading (unlike neutrons). Gas Cherenkov Detectors that convert fusion gamma rays to UV/visible Cherenkov photons for collection by fast optical recording systems have established their usefulness in illuminating ICF physics in several experimental campaigns at OMEGA. In particular, bang time precision better than 25 ps has been demonstrated, well below the 50 ps accuracy requirement defined by the NIF. NIF Gamma Reaction History (GRH) diagnostics are being developed based on optimization of sensitivity, bandwidth, dynamic range, cost, and NIF-specific logistics, requirements and extreme radiation environment. Implementation will occur in two phases. The first phase consists of four channels mounted to the outside of the target chamber at ~6 m from target chamber center (GRH-6m) coupled to ultra-fast photo-multiplier tubes (PMT). This system is intended to operate in the 1013-1017 neutron yield range expected during the early THD campaign. It will have high enough bandwidth to provide accurate bang times and burn widths for the expected THD reaction histories (> 80 ps fwhm). Successful operation of the first GRH-6m channel has been demonstrated at OMEGA, allowing a verification of instrument sensitivity, timing and EMI/background suppression. The second phase will consist of several channels located just inside the target bay shield wall at 15 m from target chamber center (GRH-15m) with optical paths leading through the cement shield wall to well-shielded streak cameras and PMTs. This system is intended to operate in the 1016-1020 yield range expected during the DT ignition campaign, providing higher temporal resolution for the

Status and progress in the Chinese ICF program

International Nuclear Information System (INIS)

He, X.T.; Deng, X.M.; Fan, D.Y.; Zhang, X.M.; Lin, Z.Q.; Wang, N.Y.; Zheng, Z.J.; Liu, J.R.

1999-01-01

The Chinese ICF program is aimed towards inertial fusion energy in the 21st century and other applications. In this presentation, driver developments involving solid state lasers, i.e. Shenguang series, and the gas laser, i.e. KrF excimer laser, are presented; the theoretical and experimental studies for target physics, the equipment development for diagnostics, and the target fabrication are described; the achievements of ICF research in the past few years are mentioned. Precision physics is the basic point in ICF research of target physics in China. And the prospects for the Chinese ICF program are encouraging. (orig.)

[The International Classification of Functioning, Disability and Health (ICF) : The implementation of the ICF Core Sets for Hand Conditions in clinical routine as an example of application].

Science.gov (United States)

Coenen, Michaela; Rudolf, Klaus-Dieter; Kus, Sandra; Dereskewitz, Caroline

2018-05-24

The International Classification of Functioning, Disability and Health (ICF) provides a standardized language of almost 1500 ICF categories for coding information about functioning and contextual factors. Short lists (ICF Core Sets) are helpful tools to support the implementation of the ICF in clinical routine. In this paper we report on the implementation of ICF Core Sets in clinical routine using the "ICF Core Sets for Hand Conditions" and the "Lighthouse Project Hand" as an example. Based on the ICF categories of the "Brief ICF Core Set for Hand Conditions", the ICF-based assessment tool (ICF Hand A ) was developed aiming to guide the assessment and treatment of patients with injuries and diseases located at the hand. The ICF Hand A facilitates the standardized assessment of functioning - taking into consideration of a holistic view of the patients - along the continuum of care ranging from acute care to rehabilitation and return to work. Reference points for the assessment of the ICF Hand A are determined in treatment guidelines for selected injuries and diseases of the hand along with recommendations for acute treatment and care, procedures and interventions of subsequent treatment and rehabilitation. The assessment of the ICF Hand A according to the defined reference points can be done using electronic clinical assessment tools and allows for an automatic generation of a timely medical report of a patient's functioning. In the future, the ICF Hand A can be used to inform the coding of functioning in ICD-11.

Progress in laboratory high gain ICF [inertial confinement fusion]: Prospects for the future

International Nuclear Information System (INIS)

Storm, E.; Lindl, J.D.; Campbell, E.M.

1988-01-01

Inertial confinement fusion (ICF), a thermonuclear reaction in a small (/approximately/5 mm diameter) fuel capsule filled with a few milligrams of deuterium and tritium, has been the subject of very fruitful experimentation since the early 1970's. High gain ICF is now on the threshold of practical applications. With a Laboratory Microfusion Facility (LMF), these applications will have major implications for national defense, basic and applied science, and power production. With a driver capable of delivering about 10 MJ in a 10-ns pulse at an intensity of /approximately/3 /times/ 10 14 W/cm 2 , an appropriately configured cryogenic capsule could be compressed to a density of about 200 g/cm 3 and a temperature of 3--5 keV. Under these conditions, up to 10 mg of DT could be ignited, and with a burn efficiency of about 30%, release up to 1000 MJ of fusion energy, an energy gain of about 100. A thousand megajoules is equivalent to about one quarter ton of TNT, or about 7 gallons of oil--an amount of energy tractable under laboratory conditions and potentially very useful for a variety of applications. 61 refs., 33 figs

Fabrication of Foam Shells for ICF Experiments

Science.gov (United States)

Czechowicz, D. G.; Acenas, O.; Flowers, J. S.; Nikroo, A.; Paguio, R. R.; Schroen, D. G.; Streit, J.; Takagi, M.

2004-11-01

The General Atomics/Schafer team has developed processes to fabricate foam shells targets suitable for ICF experiments. The two most common chemical systems used to produce foam shells have been resorcinol-formaldehyde (R/F) aerogel and divinylbenzene (DVB). Spherical targets have been made in the form of shells and beads having diameters ranging from approximately 0.5 mm to 4.0 mm, and having densities from approximately 100 mg/cc to 250 mg/cc. The work on R/F foam shells has been concentrated on 1) shell fabrication process improvement to obtain high yields ( ˜25%) and 2) depositing a reliable permeation barrier to provide shells for ongoing direct drive experiments at LLE. Development of divinylbenzene foam shells has been mainly directed towards Inertial Fusion Energy applications (at densities as low as 30 mg/cc) and recently for shells for experiments at LLE. Details of the relevant metrology and properties of these foams as well as the range of targets currently available will be discussed.

The VISTA spacecraft: Advantages of ICF [Inertial Confinement Fusion] for interplanetary fusion propulsion applications

International Nuclear Information System (INIS)

Orth, C.D.; Klein, G.; Sercel, J.; Hoffman, N.; Murray, K.; Chang-Diaz, F.

1987-01-01

Inertial Confinement Fusion (ICF) is an attractive engine power source for interplanetary manned spacecraft, especially for near-term missions requiring minimum flight duration, because ICF has inherent high power-to-mass ratios and high specific impulses. We have developed a new vehicle concept called VISTA that uses ICF and is capable of round-trip manned missions to Mars in 100 days using A.D. 2020 technology. We describe VISTA's engine operation, discuss associated plasma issues, and describe the advantages of DT fuel for near-term applications. Although ICF is potentially superior to non-fusion technologies for near-term interplanetary transport, the performance capabilities of VISTA cannot be meaningfully compared with those of magnetic-fusion systems because of the lack of a comparable study of the magnetic-fusion systems. We urge that such a study be conducted

Progress in z-pinch driven dynamic-hohlraums for high-temperature radiation-flow and ICF experiments at Sandia National Laboratories

International Nuclear Information System (INIS)

Sanford, T W L; Nash, T J; Olson, R E; Bliss, D E; Lemke, R W; Olson, C L; Ruiz, C L; Mock, R C; Bailey, J E; Chandler, G A; Cuneo, M E; Leeper, R J; Matzen, M K; Mehlhorn, T A; Slutz, S A; Stygar, W A; Peterson, D L; Chrien, R E; Watt, R G; Roderick, N F; Cooper, G W; Apruzese, J P; Sarkisov, G S; Chittenden, J P; Haines, M G

2004-01-01

Progress in understanding the physics of dynamic-hohlraums is reviewed for a system capable of generating 13 TW of axial radiation for high temperature (>200 eV) radiation-flow experiments and ICF capsule implosions

Reactor systems modeling for ICF hybrids

International Nuclear Information System (INIS)

Berwald, D.H.; Meier, W.R.

1980-10-01

The computational models of ICF reactor subsystems developed by LLNL and TRW are described and a computer program was incorporated for use in the EPRI-sponsored Feasibility Assessment of Fusion-Fission Hybrids. Representative parametric variations have been examined. Many of the ICF subsystem models are very preliminary and more quantitative models need to be developed and included in the code

ICF in the U.S.: Facilities and diagnostics

International Nuclear Information System (INIS)

Coleman, L.W.

1988-08-01

In the last few years there has been significant progress in ICF research in laboratories in the United States and elsewhere. These advances have occurred in areas that range from demonstrating an innovative laser beam smoothing techniques important for both directly and indirectly driven ICF, to achieving a more complete understanding of capsule implosions and related physics. This progress has been possible because of the capabilities provided by the ICF laser-target facilities currently in operation and the new developments in diagnostics, particularly for measurements of the implosion process and the conditions in the compressed capsule core. Both of these topics, facilities and selected new diagnostics capabilities in the US ICF Program, are summarized in this paper. 32 refs., 19 figs., 6 tabs

Vocational rehabilitation evaluation and the International Classification of Functioning, Disability, and Health (ICF).

Science.gov (United States)

Saltychev, Mikhail; Kinnunen, Aila; Laimi, Katri

2013-03-01

To identify the most frequent functional limitations according to the International Classification of Functioning, Disability, and Health (ICF) obtained by unstandardised clinical assessment of patients with chronic musculoskeletal disorders who underwent vocational rehabilitation evaluation; and to compare the obtained list with simplified versions of ICF. The descriptions of functional limitations were retrospectively identified for 32 patients. The original vocational rehabilitation evaluation was conducted by a multi-professional team in an out-patient clinic of a university hospital. The obtained descriptions were converted to ICF codes, the most frequent being compared with the ICF Checklist of the World Health Organization (WHO) and the ICF Comprehensive and Brief Core Sets suggested by the ICF Research Branch. In the study population (53 % women), 141 ICF codes were identified with a preciseness of three or more digits, the average being 21 codes/subject (median 20.0, range 9-40). When truncated to three digits, 84 ICF codes remained (average 18 codes/subject, range 9-25), 45 of which appeared in over 10 % of the study population, 24 also being found in the ICF Comprehensive, 5 in the ICF Brief Core Sets, and 33 in the WHO ICF Checklist. The list of most frequent ICF codes retrospectively obtained in this study from unstandardised records showed a similarity with ICF Comprehensive and Brief Core Sets by ICF Research Branch and the ICF Checklist by WHO, but with a bias towards the identification of body structures and functions. The results support the use of ICF in vocational rehabilitation evaluation to ensure comprehensiveness of evaluation. The ICF Comprehensive Core Set seems to be the most useful for the needs of multiprofessional team when assessing functioning of patients.

Inertial confinement fusion. 1995 ICF annual report, October 1994--September 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-06-01

Lawrence Livermore National Laboratory`s (LLNL`s) Inertial Confinement Fusion (ICF) Program is a Department of Energy (DOE) Defense Program research and advanced technology development program focused on the goal of demonstrating thermonuclear fusion ignition and energy gain in the laboratory. During FY 1995, the ICF Program continued to conduct ignition target physics optimization studies and weapons physics experiments in support of the Defense Program`s stockpile stewardship goals. It also continued to develop technologies in support of the performance, cost, and schedule goals of the National Ignition Facility (NIF) Project. The NIF is a key element of the DOE`s Stockpile Stewardship and Management Program. In addition to its primary Defense Program goals, the ICF Program provides research and development opportunities in fundamental high-energy-density physics and supports the necessary research base for the possible long-term application to inertial fusion energy (IFE). Also, ICF technologies have had spin-off applications for industrial and governmental use. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

The reliability, validity, and applicability of an English language version of the Mini-ICF-APP.

Science.gov (United States)

Molodynski, Andrew; Linden, Michael; Juckel, George; Yeeles, Ksenija; Anderson, Catriona; Vazquez-Montes, Maria; Burns, Tom

2013-08-01

This study aimed at establishing the validity and reliability of an English language version of the Mini-ICF-APP. One hundred and five patients under the care of secondary mental health care services were assessed using the Mini-ICF-APP and several well-established measures of functioning and symptom severity. 47 (45 %) patients were interviewed on two occasions to ascertain test-retest reliability and 50 (48 %) were interviewed by two researchers simultaneously to determine the instrument's inter-rater reliability. Occupational and sick leave status were also recorded to assess construct validity. The Mini-ICF-APP was found to have substantial internal consistency (Chronbach's α 0.869-0.912) and all 13 items correlated highly with the total score. Analysis also showed that the Mini-ICF-APP had good test-retest (ICC 0.832) and inter-rater (ICC 0.886) reliability. No statistically significant association with length of sick leave was found, but the unemployed scored higher on the Mini ICF-APP than those in employment (mean 18.4, SD 9.1 vs. 9.4, SD 6.4, p Mini-ICF-APP correlated highly with the other measures of illness severity and functioning considered in the study. The English version of the Mini-ICF-APP is a reliable and valid measure of disorders of capacity as defined by the International Classification of Functioning. Further work is necessary to establish whether the scale could be divided into sub scales which would allow the instrument to more sensitively measure an individual's specific impairments.

Dependence of ICF reaction dynamics on target structure

International Nuclear Information System (INIS)

Kumar, Kamal; Dutt, Sunil; GulI, Muntazir; Ahmad, Tauseef; Rizvi, I.A.; Ali, Sabir; Agarwal, Avinash; Kumar, R.; Chaubey, A.K.

2016-01-01

The projectile structure is also found responsible for the ICF reaction processes. It is found that projectile having bigger alpha cluster is more unstable towards break up. In this context, a comparative study of 12 C and 16 O ion-beams induced reactions with different targets has been done. The deduced ICF contributions for different systems have been plotted against the target charge of different targets. It is observed that target properties may also be responsible for the interplay between CF and ICF reaction dynamics

Inertial confinement fusion (ICF)

International Nuclear Information System (INIS)

Nuckolls, J.

1977-01-01

The principal goal of the inertial confinement fusion program is the development of a practical fusion power plant in this century. Rapid progress has been made in the four major areas of ICF--targets, drivers, fusion experiments, and reactors. High gain targets have been designed. Laser, electron beam, and heavy ion accelerator drivers appear to be feasible. Record-breaking thermonuclear conditions have been experimentally achieved. Detailed diagnostics of laser implosions have confirmed predictions of the LASNEX computer program. Experimental facilities are being planned and constructed capable of igniting high gain fusion microexplosions in the mid 1980's. A low cost long lifetime reactor design has been developed

The ICF and Postsurgery Occupational Therapy after Traumatic Hand Injury

Science.gov (United States)

Fitinghoff, Helene; Lindqvist, Birgitta; Nygard, Louise; Ekholm, Jan; Schult, Marie-Louise

2011-01-01

Recent studies have examined the effectiveness of hand rehabilitation programmes and have linked the outcomes to the concept of ICF but not to specific ICF category codes. The objective of this study was to gain experience using ICF concepts to describe occupational therapy interventions during postsurgery hand rehabilitation, and to describe…

Towards an ICF Core Set for chronic musculoskeletal conditions: commonalities across ICF Core Sets for osteoarthritis, rheumatoid arthritis, osteoporosis, low back pain and chronic widespread pain.

Science.gov (United States)

Schwarzkopf, S R; Ewert, T; Dreinhöfer, K E; Cieza, A; Stucki, G

2008-11-01

The objective of the study was to identify commonalities among the International Classification of Functioning, Disability and Health (ICF) Core Sets of osteoarthritis (OA), osteoporosis (OP), low back pain (LBP), rheumatoid arthritis (RA) and chronic widespread pain (CWP). The aim is to identify relevant categories for the development of a tentative ICF Core Set for musculoskeletal and pain conditions. The ICF categories common to the five musculoskeletal and pain conditions in the Brief and Comprehensive ICF Core Sets were identified in three steps. In a first step, the commonalities across the Brief and Comprehensive ICF Core Sets for these conditions were examined. In a second and third step, we analysed the increase in commonalities when iteratively excluding one or two of the five conditions. In the first step, 29 common categories out of the total number of 120 categories were identified across the Comprehensive ICF Core Sets of all musculoskeletal and pain conditions, primarily in the component activities and participation. In the second and third step, we found that the exclusion of CWP across the Comprehensive ICF Core Sets increased the commonalities of the remaining four musculoskeletal conditions in a maximum of ten additional categories. The Brief ICF Core Sets of all musculoskeletal and pain conditions contain four common categories out of a total number of 62 categories. The iterative exclusion of a singular condition did not significantly increase the commonalities in the remaining. Based on our analysis, it seems possible to develop a tentative Comprehensive ICF Core Set across a number of musculoskeletal conditions including LBP, OA, OP and RA. However, the profile of functioning in people with CWP differs considerably and should not be further considered for a common ICF Core Set.

Fluorescence and absorption spectroscopy for warm dense matter studies and ICF plasma diagnostics

Science.gov (United States)

Hansen, S. B.; Harding, E. C.; Knapp, P. F.; Gomez, M. R.; Nagayama, T.; Bailey, J. E.

2018-05-01

The burning core of an inertial confinement fusion (ICF) plasma produces bright x-rays at stagnation that can directly diagnose core conditions essential for comparison to simulations and understanding fusion yields. These x-rays also backlight the surrounding shell of warm, dense matter, whose properties are critical to understanding the efficacy of the inertial confinement and global morphology. We show that the absorption and fluorescence spectra of mid-Z impurities or dopants in the warm dense shell can reveal the optical depth, temperature, and density of the shell and help constrain models of warm, dense matter. This is illustrated by the example of a high-resolution spectrum collected from an ICF plasma with a beryllium shell containing native iron impurities. Analysis of the iron K-edge provides model-independent diagnostics of the shell density (2.3 × 1024 e/cm3) and temperature (10 eV), while a 12-eV red shift in Kβ and 5-eV blue shift in the K-edge discriminate among models of warm dense matter: Both shifts are well described by a self-consistent field model based on density functional theory but are not fully consistent with isolated-atom models using ad-hoc density effects.

Using the ICF in transition research and practice? Lessons from a scoping review.

Science.gov (United States)

Nguyen, Tram; Stewart, Debra; Rosenbaum, Peter; Baptiste, Sue; Kraus de Camargo, Olaf; Gorter, Jan Willem

2018-01-01

The International Classification of Functioning, Disability and Health (ICF) and subsequent ICF-CY (child and youth version) recognize the importance of personal and environmental factors in facilitating holistic transition planning and service delivery for youth with chronic health conditions (YCHC). The objective of this scoping review is to investigate the degree to which the ICF and ICF-CY have been used in transition research and practice since its initial publication. Arksey and O'Malley's five-stage methodological framework guided the scoping review using the following databases: AMED, CINAHL, EMBASE, HealthSTAR, MEDLINE, and PsycINFO. Keywords included: 'ICF', 'ICF-CY', and 'transition', which were adapted to each database. 25 articles met final inclusion. Two key themes emerged regarding use of the ICF: 1) the ICF enhances transdisciplinary processes to inform transition planning and interventions; and 2) the ICF facilitates comprehensive and developmentally appropriate transition services over a youth's lifecourse. The strengths and limitations of the ICF in guiding the planning and delivery of transition services are discussed. Some limitations include the large number of items inherent within the ICF and a lack of clarity between the components of activity and participation. Key recommendations include: i) further explanation and development of items for quality of life and well-being, personal factors, and psychological issues; and ii) additional research to advance knowledge towards developing empirically- based evidence for the application of the ICF in clinical practice to facilitate transition. Copyright © 2017 Elsevier Ltd. All rights reserved.

Classification of functioning and impairment: the development of ICF core sets for autism spectrum disorder.

Science.gov (United States)

Bölte, Sven; de Schipper, Elles; Robison, John E; Wong, Virginia C N; Selb, Melissa; Singhal, Nidhi; de Vries, Petrus J; Zwaigenbaum, Lonnie

2014-02-01

Given the variability seen in Autism Spectrum Disorder (ASD), accurate quantification of functioning is vital to studying outcome and quality of life in affected individuals. The International Classification of Functioning, Disability and Health (ICF) provides a comprehensive, universally accepted framework for the description of health-related functioning. ICF Core Sets are shortlists of ICF categories that are selected to capture those aspects of functioning that are most relevant when describing a person with a specific condition. In this paper, the authors preview the process for developing ICF Core Sets for ASD, a collaboration with the World Health Organization and the ICF Research Branch. The ICF Children and Youth version (ICF-CY) was derived from the ICF and designed to capture the specific situation of the developing child. As ASD affects individuals throughout the life span, and the ICF-CY includes all ICF categories, the ICF-CY will be used in this project ("ICF(-CY)" from now on). The ICF(-CY) categories to be included in the ICF Core Sets for ASD will be determined at an ICF Core Set Consensus Conference, where evidence from four preparatory studies (a systematic review, an expert survey, a patient and caregiver qualitative study, and a clinical cross-sectional study) will be integrated. Comprehensive and Brief ICF Core Sets for ASD will be developed with the goal of providing useful standards for research and clinical practice and generating a common language for functioning and impairment in ASD in different areas of life and across the life span. © 2013 International Society for Autism Research, Wiley Periodicals, Inc.

Simulation of instability growth on ICF capsule ablators

Science.gov (United States)

Niasse, Nicolas; Chittenden, Jeremy

2014-10-01

It is believed that the ablation-front instabilities are mainly responsible for the hot-spot mix that impacts the performance of ICF capsules. Understanding the formation of these instabilities is therefore a first step towards a better control of the implosion dynamics and the optimization of the fusion yield. Using the Chimera code currently in development at Imperial College, we have performed several spherical wedge simulations of the low and high adiabat ablation phase pre-imposing different single-mode 2D and 3D perturbations on the capsule surface. Synthetic Sc, Fe and V X-ray backlighter images are generated by the Spk code and used to measure the growth of modes 30-160 with initial amplitude <= 3.4 μm PTV. The growth of imposed 2D perturbations is assessed for both low-foot and high-foot radiation pulse shapes on the National Ignition Facility. Results showing the merger of spike and bubble structures in multi-mode perturbations in both 2D and 3D simulations are explored and preliminary assessments of the difference between 2D and 3D non-linear behaviour is discussed. The sensitivity of shock timing to NLTE changes in opacity is also assessed.

Non-LTE Equation of State for ICF simulations

Science.gov (United States)

Klapisch, Marcel; Bar-Shalom, Avraham; Colombant, Denis

2002-11-01

SCROLL is a collisional radiative model able to deal with complex spectra[1]. It is used to generate opacity/emissivity databases [2] compatible with the hydrocode FAST[3] for all elements of interest in the simulation of ICF targets, including high-Z. It is now modified to yield tables of EOS data for FAST, in the whole range of interest (T=1 to 25000eV, rho=10-6 to 100g/cc). SCROLL contributes the electronic -free and bound- part of the EOS, replacing Busquet's model of an ionization temperature. Ionization energies include contributions of all excited states. Energies and Z* go smoothly to the high density regime, where a "jellium" model is assumed. The free electrons are self consistent with the bound electrons. Examples of runs will be shown. Supported by USDOE through a contract with the Naval Research Laboratory. [1] A. Bar-Shalom, J. Oreg, and M. Klapisch, J. Quant. Spectrosc. Radiat. Transfer 65, 43 (2000). [2] A. Bar-shalom, M. Klapisch, J. Oreg, and D. Colombant, Bull. Am. Phys. Soc. 46, 295 (2001). [3] J. H. Gardner, A. J. Schmitt, J. P. Dahlburg, et al, Phys. Plasmas 5, 1935 (1998).

X-ray ablation measurements and modeling for ICF applications

International Nuclear Information System (INIS)

Anderson, A.T.

1996-09-01

X-ray ablation of material from the first wall and other components of an ICF (Inertial Confinement Fusion) chamber is a major threat to the laser final optics. Material condensing on these optics after a shot may cause damage with subsequent laser shots. To ensure the successful operation of the ICF facility, removal rates must be predicted accurately. The goal for this dissertation is to develop an experimentally validated x-ray response model, with particular application to the National Ignition Facility (NIF). Accurate knowledge of the x-ray and debris emissions from ICF targets is a critical first step in the process of predicting the performance of the target chamber system. A number of 1-D numerical simulations of NIF targets have been run to characterize target output in terms of energy, angular distribution, spectrum, and pulse shape. Scaling of output characteristics with variations of both target yield and hohlraum wall thickness are also described. Experiments have been conducted at the Nova laser on the effects of relevant x-ray fluences on various materials. The response was diagnosed using post-shot examinations of the surfaces with scanning electron microscope and atomic force microscope instruments. Judgments were made about the dominant removal mechanisms for each material. Measurements of removal depths were made to provide data for the modeling. The finite difference ablation code developed here (ABLATOR) combines the thermomechanical response of materials to x-rays with models of various removal mechanisms. The former aspect refers to energy deposition in such small characteristic depths (∼ micron) that thermal conduction and hydrodynamic motion are significant effects on the nanosecond time scale. The material removal models use the resulting time histories of temperature and pressure-profiles, along with ancillary local conditions, to predict rates of surface vaporization and the onset of conditions that would lead to spallation

[Functioning and disability: the International Classification of Functioning, Disability and Health (ICF)].

Science.gov (United States)

Fernández-López, Juan Antonio; Fernández-Fidalgo, María; Geoffrey, Reed; Stucki, Gerold; Cieza, Alarcos

2009-01-01

The World Health Organization's International Classification of Functioning, Disability and Health (ICF) has provided a new foundation for our understanding of health, functioning, and disability. It covers most of the health and health-related domains that make up the human experience, and the most environmental factors that influence that experience of functioning and disability. With the exhaustive ICF, patients' functioning -including its components body functions and structures and activities and participation-, becomes a central perspective in medicine. To implement the ICF in medicine and other fields, practical tools (= ICF Core Sets) have been developed. They are selected sets of categories out of the whole classification which serve as minimal standards for the assessment and reporting of functioning and health for clinical studies and clinical encounters (Brief ICF Core Set) or as standards for multiprofessional comprehensive assessment (Comprehensive ICF Core Set). Different from generic and condition-specific health-status measures, the ICF Core Sets include important body functions and structures and contextual factors. The use of the ICF Core Sets provides an important step towards improved communications between healthcare providers and professionals, and will enable patients and their families to understand and communicate with health professionals about their functioning and treatment goals. Specific applications include multi- and interdisciplinary assessment in clinical settings and in legal expert evaluations and use in disease or functioning-management programs. The ICF has also a potential as a conceptual framework to clarify an interrelated universe of health-related concepts which can be elucidated based on the ICF and therefore will be an ideal tool for teaching students in all medical fields and may open doors to multi-professional learning.

Dynamic hohlraum and ICF pellet implosion experiments on Z

International Nuclear Information System (INIS)

Nash, T.J.; Derzon, M.S.; Chandler, G.A.

1999-01-01

By stabilizing an imploding z-pinch on Z (20 MA, 100 ns) with a solid current return can and a nested wire array the authors have achieved dynamic hohlraum radiation temperatures over 200 eV at a diameter of approximately 1 mm. The pinch configuration yielding this temperature is a nested tungsten wire array of 240 and 120 wires at 4 and 2 cm diameters weighing 2 and 1 mg, 1 cm long, imploding onto a 5 mm diameter, 14 mg/cc cylindrical CH foam, weighing 3 mg. They have used a single 4 cm diameter tungsten wire array to drive a 1.6 mm diameter ICF capsule mounted in a 6 mg/cc foam inside a 3 mg copper annulus at 5 mm diameter, and measured x-ray emissions indicative of the pellet implosion. Mounting the pellet in foam may have caused the hohlraum to become equator-hot. They will present results from upcoming pellet experiments in which the pellet is mounted by thread and driven by a larger diameter, 6 or 7 mm, copper annulus to improve radiation drive symmetry. They will also discuss designs for tapered foam annular targets that distort a cylindrical pinch into a quasi-sphere that will wrap around an ICF pellet to further improve drive symmetry

Blast venting through blanket material in the HYLIFE ICF reactor

International Nuclear Information System (INIS)

Liu, J.C.; Peterson, P.F.; Schrock, V.E.

1992-01-01

This work presents a numerical study of blast venting through various blanket configurations in the HYLIFE ICF reactor design. The study uses TSUNAMI -- a multi-dimensional, high-resolution, shock capturing code -- to predict the momentum exchange and gas dynamics for blast venting in complex geometries. In addition, the study presents conservative predictions of wall loading by gas shock and impulse delivered to the protective liquid blanket. Configurations used in the study include both 2700 MJ and 350 MJ fusion yields per pulse for 5 meter and 3 meter radius reactor chambers. For the former, an annular jet array is used for the blanket geometry, while in the latter, both annular jet array as well as slab geometries are used. Results of the study indicate that blast venting and wall loading may be manageable in the HYLIFE-II design by a judicious choice of blanket configuration

The ICF has made a difference to functioning and disability measurement and statistics.

Science.gov (United States)

Madden, Rosamond H; Bundy, Anita

2018-02-12

Fifteen years after the publication of the International Classification of Functioning, Disability and Health (ICF), we investigated: How ICF applications align with ICF aims, contents and principles, and how the ICF has been used to improve measurement of functioning and related statistics. In a scoping review, we investigated research published 2001-2015 relating to measurement and statistics for evidence of: a change in thinking; alignment of applications with ICF specifications and philosophy; and the emergence of new knowledge. The ICF is used in diverse applications, settings and countries, with processes largely aligned with the ICF and intended to improve measurement and statistics: new national surveys, information systems and ICF-based instruments; and international efforts to improve disability data. Knowledge is growing about the components and interactions of the ICF model, the diverse effects of the environment on functioning, and the meaning and measurement of participation. The ICF provides specificity and a common language in the complex world of functioning and disability and is stimulating new thinking, new applications in measurement and statistics, and the assembling of new knowledge. Nevertheless, the field needs to mature. Identified gaps suggest ways to improve measurement and statistics to underpin policies, services and outcomes. Implications for Rehabilitation The ICF offers a conceptualization of functioning and disability that can underpin assessment and documentation in rehabilitation, with a growing body of experience to draw on for guidance. Experience with the ICF reminds practitioners to consider all the domains of participation, the effect of the environment on participation and the importance of involving clients/patients in assessment and service planning. Understanding the variability of functioning within everyday environments and designing interventions for removing barriers in various environments is a vital part of

Directions of ICF research in the United States

International Nuclear Information System (INIS)

Hogan, W.J.; Campbell, E.M.

1997-01-01

Inertial confinement fusion (ICF) research in the United States is in a dramatic upswing. Technical progress continues at a rapid pace and with the start of the construction of the National Ignition Facility (NIF) this year the total U.S. budget for ICF for fiscal year 1997 stands at $380 million. The NIF is being built as an essential component of the U.S. Stockpile Stewardship and Management Program which has been formulated to assure the continued safety, reliability, and performance of the downsized nuclear weapons stockpile in the absence of nuclear tests. This paper will discuss some of the directions that the ICF research is now taking. (AIP) copyright 1997 American Institute of Physics

The implementation of the ICF among Israeli rehabilitation centers--the case of physical therapy.

Science.gov (United States)

Jacob, Tamar

2013-10-01

The extent of the implementation of the International Classification of Functioning, Disability and Health (ICF), developed by the WHO, in rehabilitation units and in physical therapy (PT) departments is unknown. The study aims to describe the extent to which the ICF has been implemented in PT services within rehabilitation units in Israel. To update data on ICF implementation since its inception. An online semi-structured survey was administered to 25 physiotherapists in charge of PT departments in all rehabilitation units throughout Israel. Rehabilitation units were grouped into three categories: general, geriatric and pediatric. The questionnaire included items regarding the ICF implementation, its strengths, and weaknesses. Twenty two physiotherapists (88%) completed the questionnaire. The majority was familiar with the ICF and nearly two thirds reported partial implementation in their units. Implementation focused mostly on adopting the biopsychosocial concepts and using ICF terms. The ICF was not used either for evaluating patients, or for reporting or encoding patient information. Physiotherapists, directors of most Israeli PT departments in rehabilitation units are familiar with the ICF; however, its clinical implementation is very limited. There is need for further research into the processes of knowledge transfer and implementation of the ICF, in order to better understand the factors that facilitate and those that impede ICF implementation.

Compact torus accelerator as a driver for ICF

International Nuclear Information System (INIS)

Tobin, M.T.; Meier, W.R.; Morse, E.C.

1986-01-01

The authors have carried out further investigations of the technical issues associated with using a compact torus (CT) accelerator as a driver for inertial confinement fusion (ICF). In a CT accelerator, a magnetically confined, torus-shaped plasma is compressed, accelerated, and focused by two concentric electrodes. After its initial formation, the torus shape is maintained for lifetimes exceeding 1 ms by inherent poloidal and toroidal currents. Hartman suggests acceleration and focusing of such a plasma ring will not cause dissolution within certain constraints. In this study, we evaluated a point design based on an available capacitor bank energy of 9.2 MJ. This accelerator, which was modeled by a zero-dimensional code, produces a xenon plasma ring with a 0.73-cm radius, a velocity of 4.14 x 10 9 cm/s, and a mass of 4.42 μg. The energy of the plasma ring as it leaves the accelerator is 3.8 MJ, or 41% of the capacitor bank energy. Our studies confirm the feasibility of producing a plasma ring with the characteristics required to induce fusion in an ICF target with a gain greater than 50. The low cost and high efficiency of the CT accelerator are particularly attractive. Uncertainties concerning propagation, accelerator lifetime, and power supply must be resolved to establish the viability of the accelerator as an ICF driver

ICF-CY: A Universal Tool for Documentation of Disability

Science.gov (United States)

Simeonsson, Rune J.

2009-01-01

The "International Classification of Functioning, Disability and Health--ICF" (ICF-CY) conceptual framework offers a new paradigm and taxonomy of human functioning disability, which can be used to guide holistic and interdisciplinary approaches to assessment and intervention. In settings serving children, youth, or adults with disabilities, the…

Identification of ICF categories relevant for nursing in the situation of acute and early post-acute rehabilitation

Science.gov (United States)

Mueller, Martin; Boldt, Christine; Grill, Eva; Strobl, Ralf; Stucki, Gerold

2008-01-01

-acute rehabilitation facilities are highly relevant for rehabilitation nursing. Linking nursing interventions with ICF Core Set categories is a feasible way to analyse nursing. Using the ICF Core Sets to describe goals of nursing interventions both facilitates inter-professional communication and respects patient's needs. The ICF may thus be a useful framework to set nursing intervention goals. PMID:18282288

Identification of ICF categories relevant for nursing in the situation of acute and early post-acute rehabilitation

Directory of Open Access Journals (Sweden)

Strobl Ralf

2008-02-01

hospital and early post-acute rehabilitation facilities are highly relevant for rehabilitation nursing. Linking nursing interventions with ICF Core Set categories is a feasible way to analyse nursing. Using the ICF Core Sets to describe goals of nursing interventions both facilitates inter-professional communication and respects patient's needs. The ICF may thus be a useful framework to set nursing intervention goals.

Pulsed power, ICF, and SDI

International Nuclear Information System (INIS)

Van Devender, J.P.

1986-01-01

Pulsed power technology has been developed over many years for nuclear weapon effects simulation, inertial fusion, and directed energy. Every four years there is a factor of ten increase in power available, and we are now near the 100 TW, couple of million joule (MJ) mark, according to the author. 100 TW is sufficient for studying physics relevant to Inertial Confinement Fusion (ICF) or the Strategic Defense Initiative (SDI). Pulsed power can be viewed as a basic technology for making electron beams, X-rays, and ion beams. Applications include ICF, plasmoid-directed energy weapons, and microwave weapons. The author presents a set of tentative requirements for an effective defense, a concept for deploying the defense, and a strategy for making the transition to a defense-dominated world

Fusion yield rate recovery by escaping hot-spot fast ions in the neighboring fuel layer

Science.gov (United States)

Tang, Xian-Zhu; McDevitt, C. J.; Guo, Zehua; Berk, H. L.

2014-02-01

Free-streaming loss by fast ions can deplete the tail population in the hot spot of an inertial confinement fusion (ICF) target. Escaping fast ions in the neighboring fuel layer of a cryogenic target can produce a surplus of fast ions locally. In contrast to the Knudsen layer effect that reduces hot-spot fusion reactivity due to tail ion depletion, the inverse Knudsen layer effect increases fusion reactivity in the neighboring fuel layer. In the case of a burning ICF target in the presence of significant hydrodynamic mix which aggravates the Knudsen layer effect, the yield recovery largely compensates for the yield reduction. For mix-dominated sub-ignition targets, the yield reduction is the dominant process.

Validation of the Comprehensive ICF Core Set for obstructive pulmonary diseases from the perspective of physiotherapists.

Science.gov (United States)

Rauch, Alexandra; Kirchberger, Inge; Stucki, Gerold; Cieza, Alarcos

2009-12-01

The 'Comprehensive ICF Core Set for obstructive pulmonary diseases' (OPD) is an application of the International Classification of Functioning, Disability and Health (ICF) and represents the typical spectrum of problems in functioning of patients with OPD. To optimize a multidisciplinary and patient-oriented approach in pulmonary rehabilitation, in which physiotherapy plays an important role, the ICF offers a standardized language and understanding of functioning. For it to be a useful tool for physiotherapists in rehabilitation of patients with OPD, the objective of this study was to validate this Comprehensive ICF Core Set for OPD from the perspective of physiotherapists. A three-round survey based on the Delphi technique of physiotherapists who are experienced in the treatment of OPD asked about the problems, resources and aspects of environment of patients with OPD that physiotherapists treat in clinical practice (physiotherapy intervention categories). Responses were linked to the ICF and compared with the existing Comprehensive ICF Core Set for OPD. Fifty-one physiotherapists from 18 countries named 904 single terms that were linked to 124 ICF categories, 9 personal factors and 16 'not classified' concepts. The identified ICF categories were mainly third-level categories compared with mainly second-level categories of the Comprehensive ICF Core Set for OPD. Seventy of the ICF categories, all personal factors and 15 'not classified' concepts gained more than 75% agreement among the physiotherapists. Of these ICF categories, 55 (78.5%) were covered by the Comprehensive ICF Core Set for OPD. The validity of the Comprehensive ICF Core Set for OPD was largely supported by the physiotherapists. Nevertheless, ICF categories that were not covered, personal factors and not classified terms offer opportunities towards the final ICF Core Set for OPD and further research to strengthen physiotherapists' perspective in pulmonary rehabilitation.

ICF-viitekehyksen soveltuminen kuntoutusprosessin tueksi kehitysvammahuollossa : Työntekijöiden näkemyksiä

OpenAIRE

Hellsten, Pirjo; Marin-Vilkkinen, Susanna

2017-01-01

Pirkanmaan Sairaanhoitopiirin kehitysvammahuollossa käynnistettiin ICF-projekti vuosille 2015-2018. Projektin tarkoituksena on ottaa ICF-viitekehys käyttöön kuntoutuksen tueksi toimintakyvyn kuvaamisessa. Opinnäytetyön tarkoituksena oli saada tietoa ICF-viitekehyksen soveltumisesta kehitysvammaisen asiakkaan kuntoutusprosessissa ja tavoitteena oli tuottaa tietoa ICF- viitekehyksen käyttöönotosta ICF-projektiryhmän käyttöön. Opinnäytetyö toteutettiin laadullisena tutkimuksena. Tutkimusaine...

Standardized reporting of functioning information on ICF-based common metrics.

Science.gov (United States)

Prodinger, Birgit; Tennant, Alan; Stucki, Gerold

2018-02-01

In clinical practice and research a variety of clinical data collection tools are used to collect information on people's functioning for clinical practice and research and national health information systems. Reporting on ICF-based common metrics enables standardized documentation of functioning information in national health information systems. The objective of this methodological note on applying the ICF in rehabilitation is to demonstrate how to report functioning information collected with a data collection tool on ICF-based common metrics. We first specify the requirements for the standardized reporting of functioning information. Secondly, we introduce the methods needed for transforming functioning data to ICF-based common metrics. Finally, we provide an example. The requirements for standardized reporting are as follows: 1) having a common conceptual framework to enable content comparability between any health information; and 2) a measurement framework so that scores between two or more clinical data collection tools can be directly compared. The methods needed to achieve these requirements are the ICF Linking Rules and the Rasch measurement model. Using data collected incorporating the 36-item Short Form Health Survey (SF-36), the World Health Organization Disability Assessment Schedule 2.0 (WHODAS 2.0), and the Stroke Impact Scale 3.0 (SIS 3.0), the application of the standardized reporting based on common metrics is demonstrated. A subset of items from the three tools linked to common chapters of the ICF (d4 Mobility, d5 Self-care and d6 Domestic life), were entered as "super items" into the Rasch model. Good fit was achieved with no residual local dependency and a unidimensional metric. A transformation table allows for comparison between scales, and between a scale and the reporting common metric. Being able to report functioning information collected with commonly used clinical data collection tools with ICF-based common metrics enables clinicians

FUNCTIONAL PROFILE OF ACTIVE OLDER ADULTS WITH LOW BACK PAIN, ACCORDING TO THE ICF

Directory of Open Access Journals (Sweden)

Andersom Ricardo Fréz

Full Text Available ABSTRACT Introduction: The International Classification of Functioning, Disability and Health (ICF considers multiples aspects of functionality. It is believed that this tool can help to classify the functionality of older adults with low back pain (LBP . Objectives: To describe the functionality of active older adults with LBP according to the ICF. Methods: A transversal study was conducted using the brief ICF core set for low back pain, to establish functional profiles of 40 older adults. The ICF categories were considered valid when ≥20% of participants showed some disability. Results: Thirty-two of the 35 categories of the brief ICF core set could be considered representative of the sample. Conclusion: The brief ICF core set for LBP results demonstrated that this classification system is representative for describing the functional profile of the sample.

Spin-polarized fuel in ICF pellets

International Nuclear Information System (INIS)

Wakuta, Yoshihisa; Emoto, Nobuya; Nakao, Yasuyuki; Honda, Takuro; Honda, Yoshinori; Nakashima, Hideki.

1990-01-01

The use of parallel spin-polarized DT or D 3 He fuel increases the fusion cross-section by 50%. By implosion-burn simulation for inertially confined fusion (ICF) pellets of the spin-polarized fuels, we found that the input energy requirement could be reduced by nearly a fact of two. These pellets taken up here include large-high-aspect-ratio DT target proposed in ILE Osaka University and DT ignitor/D 3 He fuel pellet proposed by our group. We also found that the polarized state could survive during the implosion-burn phase. (author)

Problems in functioning after a mild traumatic brain injury within the ICF framework: the patient perspective using focus groups.

Science.gov (United States)

Sveen, Unni; Ostensjo, Sigrid; Laxe, Sara; Soberg, Helene L

2013-05-01

To describe problems in body functions, activities, and participation and the influence of environmental factors as experienced after mild traumatic brain injury (TBI), using the ICF framework. To compare our findings with the Brief and Comprehensive ICF Core Sets for TBI. Six focus-group interviews were performed with 17 participants (nine women, eight men, age ranged from 22 to 55 years) within the context of an outpatient rehabilitation programme for patients with mild TBI. The interviews were transcribed verbatim and analysed using the ICF. One-hundred and eight second-level categories derived from the interview text, showing a large diversity of TBI-related problems in functioning. Problems in cognitive and emotional functions, energy and drive, and in carrying out daily routine and work, were frequently reported. All ICF categories reported with high-to-moderate frequencies were present in the Brief ICF Core Set and 84% in the Comprehensive ICF Core Set. The reported environmental factors mainly concerned aspects of health and social security systems, social network and attitudes towards the injured person. This study confirms the diversity of problems and the environmental factors that have an impact on post-injury functioning of patients with mild TBI.

Coating requirements for an ICF dry-wall design

International Nuclear Information System (INIS)

Taylor, L.H.; Sucov, E.W.

1981-01-01

A new concept for protecting the first wall of an ICF reactor has been developed which relies heavily on a coating to protect the steel tubes which comprise the first wall. This coating must survive the pellet explosion, be ductile, and be compatible with the materials in the ICF pellet. Calculations indicate that tantalum is the best choice for the coating material and that tantalum coated steel tubes can handle fusion thermal powers of 3500 MW in a 10 m radius spherical chamber

Sirius-T, a symmetrically illuminated ICF tritium production facility

International Nuclear Information System (INIS)

Sviatoslavsky, I.N.; Sawan, M.E.; Moses, G.A.; Kulcinski, G.L.; Engelstad, R.L.; Larsen, E.; Lovell, E.; MacFarlane, J.; Peterson, R.R.; Wittenberg, L.J.

1989-01-01

A scoping study of a symmetrically illuminated ICF tritium production facility utilizing a KrF laser is presented. A single shell ICF target is illuminated by 92 beams symmetrically distributed around a spherical cavity filled with xenon gas at 1.0 torr. The driver energy and target gain are taken to be 2 MJ and 50 for the optimistic case and 1 MJ and 100 for the conservative case. Based on a graphite dry wall evaporation rate of 0.1 cm/y for a 100 MJ yield, the authors estimate a cavity radius of 3.5 m for a rep-rate of 10 Hz and 3.0 m for 5 Hz. A spherical structural frame has been scoped out capable of supporting 92 blanket modules, each with a beam port in the center. They have selected liquid lithium in vanadium structure as the primary breeding concept utilizing beryllium as a neutron multiplier. A tritium breeding ratio of 1.83 can be achieved in the 3 m radius cavity which at 10 Hz and an availability of 75% provides an annual tritium surplus of 32.6 kg. Assuming 100% debt financing over a 30 year reactor lifetime, the production cost of T 2 for the 2 MJ driver case is $7,325/g for a 5% interest rate and $12,370/g for a 10% interest rate. 8 refs., 3 figs., 4 tabs

Advances in commercial ICF technology since 1986

International Nuclear Information System (INIS)

Kulcinski, G.L.

1989-01-01

Progress in the march toward commercial ICF fusion reactors has been uneven in the past few years. Considerable advances have been made in the area of light ion beam fusion through the development of rep ratable drivers (i.e., HERMES-III technology) and diodes (i.e., applied B configuration with renewable Li surfaces). Significant progress in the development of lasers to compress targets has also been made through the KrF Aurura program. The possibility of lowering the cost of glass in the advanced solid state lasers has been given serious consideration. The development of the Induced Spatial Incoherence (ISI) technique to improve the uniformity of the laser beam has allowed physicists and engineers to once again contemplate the use of symmetric illumination. This would reduce the driver energy required to achieve high gains but it also introduces difficulty in the reactor design. Relatively little progress in commercial heavy ion beam drivers has been made over the past few years aside from an indepth study (HIFSA) of the desirable operating regimes to be pursued. Other areas where little progress has been made are conceptual reactor studies, target declassification and specific experimental programs to address commercial ICF reactor technology needs

Relationship between work-related attitudes, performance and capacities according to the ICF in patients with mental disorders.

Science.gov (United States)

Linden, Michael; Baron, Stefanie; Muschalla, Beate

2010-01-01

The International Classification of Functioning Disability and Health (ICF) differentiates between functions, activities/capacities, contextual factors and participation. Dysfunctions can result in impaired capacities, which in turn can lead to problems with participation depending on the context. Motivational and volitional deficits are intervening factors. The question is to what degree work performance (i.e. participation), motivational factors, and the inability to perform activities (i.e. dysfunctions) interact. Incapacities were measured in 213 patients (70% women) admitted to the Department of Behavioral Medicine using the Mini-ICF-Rating for Mental Disorders (Mini-ICF-APP), work performance was measured with the Endicott Work Productivity Scale (EWPS), and volitional and motivational problems in regard to work were assessed with the Arbeitsbezogenes Verhaltens- und Erlebensmuster (AVEM). Sick leave prior to admission and work-related problems were assessed in a special clinical interview. The mean global score of the Mini-ICF-APP across all patients was 0.84 +/- 0.56 (SD), corresponding to 'mild disability'. The highest disabilities in this patient population were found for 'flexibility' (item 3, 1.64 +/- 0.94); the lowest disabilities were found for 'self maintenance' (item 11, 0.19 +/- 0.44) and 'mobility' (item 12, 0.43 +/- 0.85). Partial correlations between the Mini-ICF-APP, AVEM and EWPS showed highly significant correlations between the Mini-ICF-APP and EWPS and no or weak correlations between the AVEM and the Mini-ICF-APP or EWPS. Work performance is primarily related to the inability to perform activities and incapacities, and only due to attitudes or volitional/motivational factors to a much lesser degree. Therefore, capacity and motivation can and must be separated. Copyright (c) 2010 S. Karger AG, Basel.

Performance of the Aurora KrF ICF laser system

International Nuclear Information System (INIS)

Jones, J.E.; Czuchlewski, S.J.; Turner, T.P.; Watt, R.G.; Thomas, S.J.; Netz, D.A.; Tallman, C.R.; Mack, J.M.; Figueira, J.F.

1990-01-01

Because short wavelength lasers are attractive for inertial confinement fusion (ICF), the Department of Energy is sponsoring work at Los Alamos National Laboratory in krypton-fluoride (KrF) laser technology. Aurora is a short-pulse, high-power, KrF laser system. It serves as an end-to-end technology demonstration prototype for large-scale ultraviolet laser systems for short wavelength ICF research. The system employs optical angular multiplexing and serial amplification by electron-beam-driven KrF laser amplifiers. The 1 to 5 ns pulse of the Aurora front end is split into 96 beams which are angularly and temporally multiplexed to produce a 480 ns pulse train for amplification by four KrF laser amplifiers. In the present system configuration half (48) of the amplified pulses are demultiplexed using different optical path lengths and delivered simultaneously to target. This paper discusses how the Aurora laser system has entered the initial operational phase by delivering pulse energies of greater than one kilojoule to target

Towards an ICF-based clinical measure of functioning in people with ankylosing spondylitis: a methodological exploration.

Science.gov (United States)

Cieza, A; Hilfiker, R; Boonen, A; van der Heijde, D; Braun, J; Stucki, G

2009-01-01

To explore whether it is possible to construct clinical measures of functioning for patients with ankylosing spondylitis (AS) by integrating information obtained across categories of the International Classification of Functioning, Disability and Health (ICF). Sixty-eight ICF categories that were identified as relevant by patients with AS and that covered body functions, structures, and activity and participation were analysed based on the Rasch model for ordered response options. The following properties were studied: unidimensionality, reliability, fit of the ICF categories to the Rasch model, the appropriateness of the order of the response options of the ICF qualifier, and the targeting between the ICF categories and the person's abilities. After accounting for disordered thresholds and misfitting ICF categories, a clinical measure of functioning for AS was proposed that contained 64 ICF categories. On the basis of a transformation table, the raw scores obtained by adding the answers to the 64 ICF categories can be transformed to the Rasch logit scale and to a meaningful interval scale ranging from zero to 100. For the first time, it has been shown that clinical measures of functioning, in principle, can be constructed based on the comprehensive ICF framework covering body functions and structures and activities and participation domains. The results of this investigation are preliminary and must be validated, but they are promising and can contribute to the acceptance and usefulness of the ICF in clinical practice.

Fluorescence and absorption spectroscopy for warm dense matter studies and ICF plasma diagnostics

Science.gov (United States)

Hansen, Stephanie

2017-10-01

The burning core of an inertial confinement fusion (ICF) plasma at stagnation is surrounded by a shell of warm, dense matter whose properties are difficult both to model (due to a complex interplay of thermal, degeneracy, and strong coupling effects) and to diagnose (due to low emissivity and high opacity). We demonstrate a promising technique to study the warm dense shells of ICF plasmas based on the fluorescence emission of dopants or impurities in the shell material. This emission, which is driven by x-rays produced in the hot core, exhibits signature changes in response to compression and heating. High-resolution measurements of absorption and fluorescence features can refine our understanding of the electronic structure of material under high compression, improve our models of density-driven phenomena such as ionization potential depression and plasma polarization shifts, and help diagnose shell density, temperature, mass distribution, and residual motion in ICF plasmas at stagnation. Sandia National Laboratories is a multi-mission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA-0003525. This work was supported by the U.S. Department of Energy, Office of Science Early Career Research Program, Office of Fusion Energy Sciences under FWP-14-017426.

The International Classification of Functioning, Disability and Health (ICF) in Electronic Health Records. A Systematic Literature Review.

Science.gov (United States)

Maritz, Roxanne; Aronsky, Dominik; Prodinger, Birgit

2017-09-20

The International Classification of Functioning, Disability and Health (ICF) is the World Health Organization's standard for describing health and health-related states. Examples of how the ICF has been used in Electronic Health Records (EHRs) have not been systematically summarized and described yet. To provide a systematic review of peer-reviewed literature about the ICF's use in EHRs, including related challenges and benefits. Peer-reviewed literature, published between January 2001 and July 2015 was retrieved from Medline ® , CINAHL ® , Scopus ® , and ProQuest ® Social Sciences using search terms related to ICF and EHR concepts. Publications were categorized according to three groups: Requirement specification, development and implementation. Information extraction was conducted according to a qualitative content analysis method, deductively informed by the evaluation framework for Health Information Systems: Human, Organization and Technology-fit (HOT-fit). Of 325 retrieved articles, 17 publications were included; 4 were categorized as requirement specification, 7 as development, and 6 as implementation publications. Information regarding the HOT-fit evaluation framework was summarized. Main benefits of using the ICF in EHRs were its unique comprehensive perspective on health and its interdisciplinary focus. Main challenges included the fact that the ICF is not structured as a formal terminology as well as the need for a reduced number of ICF codes for more feasible and practical use. Different approaches and technical solutions exist for integrating the ICF in EHRs, such as combining the ICF with other existing standards for EHR or selecting ICF codes with natural language processing. Though the use of the ICF in EHRs is beneficial as this review revealed, the ICF could profit from further improvements such as formalizing the knowledge representation in the ICF to support and enhance interoperability.

Innovative ICF scheme-impact fast ignition

International Nuclear Information System (INIS)

Murakami, M.; Nagatomo, H.; Sakaiya, T.; Karasik, M.; Gardner, J.; Bates, J.

2007-01-01

A totally new ignition scheme for ICF, impact fast ignition (IFI), is proposed [1], in which the compressed DT main fuel is to be ignited by impact collision of another fraction of separately imploded DT fuel, which is accelerated in the hollow conical target. Two-dimensional hydrodynamic simulation results in full geometry are presented, in which some key physical parameters for the impact shell dynamics such as 10 8 cm/s of the implosion velocity, 200- 300 g/cm 3 of the compressed density, and the converted temperature beyond 5 keV are demonstrated. As the first step toward the proof-of-principle of IFI, we have conducted preliminary experiments under the operation of GEKKO XII/HYPER laser system to achieve a hyper-velocity of the order of 108 cm/s. As a result we have observed a highest velocity, 6.5 x 10 7 cm/s, ever achieved. Furthermore, we have also done the first integrated experiments using the target and observed substantial amount of neutron yields. Reference: [1] M. Murakami and Nagatomo, Nucl. Instrum. Meth. Phys. Res. A 544(2005) 67

An international qualitative study of ability and disability in ADHD using the WHO-ICF framework.

Science.gov (United States)

Mahdi, Soheil; Viljoen, Marisa; Massuti, Rafael; Selb, Melissa; Almodayfer, Omar; Karande, Sunil; de Vries, Petrus J; Rohde, Luis; Bölte, Sven

2017-10-01

This is the third in a series of four cross-cultural empirical studies designed to develop International Classification of Functioning, Disability and Health (ICF, and Children and Youth version, ICF(-CY) Core Sets for Attention-Deficit Hyperactivity Disorder (ADHD). To explore the perspectives of individuals diagnosed with ADHD, self-advocates, immediate family members and professional caregivers on relevant areas of impairment and functional abilities typical for ADHD across the lifespan as operationalized by the ICF(-CY). A qualitative study using focus group discussions or semi-structured interviews of 76 participants, divided into 16 stakeholder groups. Participants from five countries (Brazil, India, Saudi Arabia, South Africa and Sweden) were included. A deductive qualitative content analysis was conducted to extract meaningful functioning and disability concepts from verbatim material. Extracted concepts were then linked to ICF(-CY) categories by independent researchers using a standardized linking procedure. In total, 82 ICF(-CY) categories were identified, of which 32 were related to activities and participation, 25 to environmental factors, 23 to body functions and 2 to body structures. Participants also provided opinions on experienced positive sides to ADHD. A high level of energy and drive, creativity, hyper-focus, agreeableness, empathy, and willingness to assist others were the most consistently reported strengths associated with ADHD. Stakeholder perspectives highlighted the need to appraise ADHD in a broader context, extending beyond diagnostic criteria into many areas of ability and disability as well as environmental facilitators and barriers. This qualitative study, along with three other studies (comprehensive scoping review, expert survey and clinical study), will provide the scientific basis to define ICF(-CY) Core Sets for ADHD, from which assessment tools can be derived for use in clinical and research setting, as well as in health care

Identification of relevant ICF categories in patients with chronic health conditions: a Delphi exercise.

Science.gov (United States)

Weigl, Martin; Cieza, Alarcos; Andersen, Christina; Kollerits, Barbara; Amann, Edda; Stucki, Gerold

2004-07-01

To identify the most typical and relevant categories of the International Classification of Functioning, Disability and Health (ICF) for patients with low back pain, osteoporosis, rheumatoid arthritis, osteoarthritis, chronic generalized pain, stroke, depression, obesity, chronic ischaemic heart disease, obstructive pulmonary disease, diabetes mellitus, and breast cancer. An international expert survey using the Delphi technique was conducted. Data were collected in 3 rounds. Answers were linked to the ICF and analysed for the degree of consensus. Between 21 (osteoporosis, chronic ischaemic heart disease, and obstructive pulmonary disease) and 43 (stroke) experts responded in each of the conditions. In all conditions, with the exception of depression, there were categories in all ICF components that were considered typical and/or relevant by at least 80% of the responders. While all conditions had a distinct typical spectrum of relevant ICF categories, there were also some common relevant categories throughout the majority of conditions. Lists of ICF categories that are considered relevant and typical for specific conditions by international experts could be created. This is an important step towards identifying ICF Core Sets for chronic conditions.

Overlap and Nonoverlap Between the ICF Core Sets for Hearing Loss and Otology and Audiology Intake Documentation.

Science.gov (United States)

van Leeuwen, Lisette M; Merkus, Paul; Pronk, Marieke; van der Torn, Marein; Maré, Marcel; Goverts, S Theo; Kramer, Sophia E

The International Classification of Functioning Disability and Health (ICF) Core Sets for Hearing Loss (HL) were developed to serve as a standard for the assessment and reporting of the functioning and health of patients with HL. The aim of the present study was to compare the content of the intake documentation currently used in secondary and tertiary hearing care settings in the Netherlands with the content of the ICF Core Sets for HL. Research questions were (1) to what extent are the ICF Core Sets for HL represented in the Dutch Otology and Audiology intake documentation? (2) are there any extra ICF categories expressed in the intake documentation that are currently not part of the ICF Core Sets for HL, or constructs expressed that are not part of the ICF? Multicenter patient record study including 176 adult patients from two secondary, and two tertiary hearing care settings. The intake documentation was selected from anonymized patient records. The content was linked to the appropriate ICF category from the whole ICF classification using established linking rules. The extent to which the ICF Core Sets for HL were represented in the intake documentation was determined by assessing the overlap between the ICF categories in the Core Sets and the list of unique ICF categories extracted from the intake documentation. Any extra constructs that were expressed in the intake documentation but are not part of the Core Sets were described as well, differentiating between ICF categories that are not part of the Core Sets and constructs that are not part of the ICF classification. In total, otology and audiology intake documentation represented 24 of the 27 Brief ICF Core Set categories (i.e., 89%), and 60 of the 117 Comprehensive ICF Core Set categories (i.e., 51%). Various ICF Core Sets categories were not represented, including higher mental functions (Body Functions), civic life aspects (Activities and Participation), and support and attitudes of family (Environmental

Identification of relevant ICF categories for indication, intervention planning and evaluation of health resort programs: a Delphi exercise

Science.gov (United States)

Morita, E.; Weigl, M.; Schuh, A.; Stucki, G.

2006-01-01

Health resort programs have a long tradition, mainly in European countries and Japan. They rely on local resources and the physical environment, physical medicine interventions and traditional medicine to optimise functioning and health. Arguably because of the long tradition, there is only a limited number of high-quality studies that examine the effectiveness of health resort programs. Specific challenges to the evaluation of health resort programs are to randomise the holistic approach with a varying number of specific interventions but also the reliance on the effect of the physical environment. Reference standards for the planning and reporting of health resort studies would be highly beneficial. With the International Classification of Functioning Disability and Health (ICF), we now have such a standard that allows us to describe body functions and structures, activities and participation and interaction with environmental factors. A major challenge when applying the ICF in practice is its length. Therefore, the objective of this project was to identify the ICF categories most relevant for health resort programs. We conducted a consensus-building, three-round, e-mail survey using the Delphi technique. Based on the consensus of the experts, it was possible to come up with an ICF Core Set that can serve as reference standards for the indication, intervention planning and evaluation of health resort programs. This preliminary ICF Core Set should be tested in different regions and in subsets of health resort visitors with varying conditions.

Looking at the ICF and human communication through the lens of classification theory.

Science.gov (United States)

Walsh, Regina

2011-08-01

This paper explores the insights that classification theory can provide about the application of the International Classification of Functioning, Disability and Health (ICF) to communication. It first considers the relationship between conceptual models and classification systems, highlighting that classification systems in speech-language pathology (SLP) have not historically been based on conceptual models of human communication. It then overviews the key concepts and criteria of classification theory. Applying classification theory to the ICF and communication raises a number of issues, some previously highlighted through clinical application. Six focus questions from classification theory are used to explore these issues, and to propose the creation of an ICF-related conceptual model of communicating for the field of communication disability, which would address some of the issues raised. Developing a conceptual model of communication for SLP purposes closely articulated with the ICF would foster productive intra-professional discourse, while at the same time allow the profession to continue to use the ICF for purposes in inter-disciplinary discourse. The paper concludes by suggesting the insights of classification theory can assist professionals to apply the ICF to communication with the necessary rigour, and to work further in developing a conceptual model of human communication.

Integration of the Aurora KrF ICF laser system at Los Alamos

International Nuclear Information System (INIS)

Rosocha, L.A.; Blair, L.S.

1988-01-01

The Aurora laser system, under construction at the Los Alamos National Laboratory for the past few years, is now being integrated into a working system for examining the applicability of high-power KrF lasers to inertial confinement fusion (ICF). The design principles of the system have been described in detail in earlier publications and conferences. Multikilojoule 248-nm 5-ns duration laser pulses, which have been derived from angular-multiplexed electron-beam-driven KrF amplifiers, are to be delivered to ICF targets when the system is fully integrated. The authors describe the progress of the Aurora system toward the goal of delivering energy (MkJ/48 pulses stacked into one 5-ns pulse/200-μm spot) to ICF targets. Integrated performance to date of the front end optical multiplexer/demultiplexer e-beam-driven amplifiers and alignment hardware are discussed in particular. They have concentrated on the demonstration of system integration at a modest (--100-J) level of energy on-target (without the final amplifier stage). They discuss the amplifier gain measurements, the extraction of energy from a chain of three e-beam-driven machines, and progress toward the delivery of on-target energy

On the absolute calibration of a DT fusion neutron yield diagnostic

Directory of Open Access Journals (Sweden)

Ruiz C.L.

2013-11-01

Full Text Available Recent advances in Inertial Confinement Fusion (ICF experiments at Lawrence Livermore National Laboratory's National Ignition Facility (NIF have underscored the need for accurate total yield measurements of DT neutrons because yield measurements provide a measure of the predicted performance of the experiments. Future gas-puff DT experiments at Sandia National Laboratory's Z facility will also require similar measurements. For ICF DT experiments, the standard technique for measuring the neutron (14.1 MeV yield, counts the activity (counts/minute induced in irradiated copper samples. This activity occurs by the 63Cu(n,2n62Cu reaction where 62Cu decays by positrons (β+ with a half-life of 9.67 minutes. The calibrations discussed here employ the associated-particle method (APM, where the α (4He particles from the T(d,n4He reaction are measured to infer neutron fluxes on a copper sample. The flux induces 62Cu activity, measured in a coincidence counting system. The method leads to a relationship between a DT neutron yield and copper activity known as the F-factor. The goal in future experiments is to apply this calibration to measure the yield at NIF with a combined uncertainty approaching 5%.

Italian ICF training programs: describing and promoting human functioning and research.

Science.gov (United States)

Francescutti, Carlo; Fusaro, Guido; Leonardi, Matilde; Martinuzzi, Andrea; Sala, Marina; Russo, Emanuela; Frare, Mara; Pradal, Monica; Zampogna, Daniela; Cosentino, Alessandro; Raggi, Alberto

2009-01-01

Purpose of the article is to report on 5 years of ICF training experiences in Italy aimed at promoting a consistent approach to ICF's field application. More than 7000 persons participated in around 150 training events: almost half were organised by political bodies, at national, regional or local level, directly linked to implementation experiences. Few training events were organised by the school sector, while training commissioned by NGOs represent a relevant area and, in our opinion, constitute the first step towards a full inclusion of persons with disabilities. Central pillars of our training modules are: the inclusion of all ICF components in the description of functional profiles, the need of providing brief theoretical background information before moving to practical aspects and the importance of providing personalised face to face training modules, in contrast to self-administered learning modules, or web-based protocols. On the basis of our experience, we can conclude that training's objectives are generally reached: trainees improved their knowledge of the ICF and its related tools, and are able to begin practical applications in their contexts.

The LLNL [Lawrence Livermore National Laboratory] ICF [Inertial Confinement Fusion] Program: Progress toward ignition in the Laboratory

International Nuclear Information System (INIS)

Storm, E.; Batha, S.H.; Bernat, T.P.; Bibeau, C.; Cable, M.D.; Caird, J.A.; Campbell, E.M.; Campbell, J.H.; Coleman, L.W.; Cook, R.C.; Correll, D.L.; Darrow, C.B.; Davis, J.I.; Drake, R.P.; Ehrlich, R.B.; Ellis, R.J.; Glendinning, S.G.; Haan, S.W.; Haendler, B.L.; Hatcher, C.W.; Hatchett, S.P.; Hermes, G.L.; Hunt, J.P.; Kania, D.R.; Kauffman, R.L.; Kilkenny, J.D.; Kornblum, H.N.; Kruer, W.L.; Kyrazis, D.T.; Lane, S.M.; Laumann, C.W.; Lerche, R.A.; Letts, S.A.; Lindl, J.D.; Lowdermilk, W.H.; Mauger, G.J.; Montgomery, D.S.; Munro, D.H.; Murray, J.R.; Phillion, D.W.; Powell, H.T.; Remington, B.R.; Ress, D.B.; Speck, D.R.; Suter, L.J.; Tietbohl, G.L.; Thiessen, A.R.; Trebes, J.E.; Trenholme, J.B.; Turner, R.E.; Upadhye, R.S.; Wallace, R.J.; Wiedwald, J.D.; Woodworth, J.G.; Young, P.M.; Ze, F.

1990-01-01

The Inertial Confinement Fusion (ICF) Program at the Lawrence Livermore National Laboratory (LLNL) has made substantial progress in target physics, target diagnostics, and laser science and technology. In each area, progress required the development of experimental techniques and computational modeling. The objectives of the target physics experiments in the Nova laser facility are to address and understand critical physics issues that determine the conditions required to achieve ignition and gain in an ICF capsule. The LLNL experimental program primarily addresses indirect-drive implosions, in which the capsule is driven by x rays produced by the interaction of the laser light with a high-Z plasma. Experiments address both the physics of generating the radiation environment in a laser-driven hohlraum and the physics associated with imploding ICF capsules to ignition and high-gain conditions in the absence of alpha deposition. Recent experiments and modeling have established much of the physics necessary to validate the basic concept of ignition and ICF target gain in the laboratory. The rapid progress made in the past several years, and in particular, recent results showing higher radiation drive temperatures and implosion velocities than previously obtained and assumed for high-gain target designs, has led LLNL to propose an upgrade of the Nova laser to 1.5 to 2 MJ (at 0.35 μm) to demonstrate ignition and energy gains of 10 to 20 -- the Nova Upgrade

Burn performance of deuterium-tritium, deuterium-deuterium, and catalyzed deuterium ICF targets

International Nuclear Information System (INIS)

Harris, D.B.; Blue, T.E.

1983-01-01

The University of Illinois hydrodynamic burn code, AFBURN, has been used to model the performance of homogeneous D-T, D 2 , and catalyzed deuterium ICF targets. Yields and gains are compared for power-producing targets. AFBURN is a one-dimensional, two-temperature, single-fluid hydrodynamic code with non-local fusion product energy deposition. The initial conditions for AFBURN are uniformly compressed targets with central hot spots. AFBURN predicts that maximum D 2 target gains are obtained for target rhoR and spark rhoR about seven times larger than the target and spark rhoR for maximum D-T target gains, that the maximum D 2 target gain is approximately one third of the maximum D-T target gain, and that the corresponding yields are approximately equal. By recycling tritium and 3 He from previous targets, D 2 target performance can be improved by about 10%. (author)

Physics of ignition for ICF capsules

International Nuclear Information System (INIS)

Lindl, J.D.

1989-01-01

The implosion of an ICF capsule must accomplish both compression of the main fuel to several hundred grams per cubic centimeter and heating and compression of the central region of the fuel to ignition. This report discusses the physics of these conditions

Mapping of a standard documentation template to the ICF core sets for arthritis and low back pain.

Science.gov (United States)

Escorpizo, Reuben; Davis, Kandace; Stumbo, Teri

2010-12-01

To identify the contents of a documentation template in The Guide to Physical Therapist Practice using the International Classification of Functioning, Disability, and Health (ICF) Core Sets for rheumatoid arthritis, osteoarthritis, and low back pain (LBP) as reference. Concepts were identified from items of an outpatient documentation template and mapped to the ICF using established linking rules. The ICF categories that were linked were compared with existing arthritis and LBP Core Sets. Based on the ICF, the template had the highest number (29%) of linked categories under Activities and participation while Body structures had the least (17%). ICF categories in the arthritis and LBP Core Sets had a 37-55% match with the ICF categories found in the template. We found 164 concepts that were not classified or not defined and 37 as personal factors. The arthritis and LBP Core Sets were reflected in the contents of the template. ICF categories in the Core Sets were reflected in the template (demonstrating up to 55% match). Potential integration of ICF in documentation templates could be explored and examined in the future to enhance clinical encounters and multidisciplinary communication. Copyright © 2010 John Wiley & Sons, Ltd.

Prevalence and features of ICF-disability in Spain as captured by the 2008 National Disability Survey

Directory of Open Access Journals (Sweden)

Maierhofer Sarah

2011-11-01

Full Text Available Abstract Background Since 1986, the study of disability in Spain has been mainly addressed by National Disability Surveys (NDSs. While international attempts to frame NDS designs within the International Classification of Functioning, Disability and Health (ICF have progressed, in general, the ICF has hardly been used in either the NDS or epidemiological studies. This study sought to identify ICF Activity- and Participation-related content in the most recent Spanish NDS, the 2008 Survey on Disabilities, Independence and Dependency Situations (Encuesta sobre discapacidades, autonomía personal y situaciones de Dependencia - EDAD 2008, and estimate the prevalence of such ICF-framed disability. Methods EDAD 2008 methods and questions were perused. Of the 51 EDAD items analysed, 29 were backcoded to specific d2-d7 domains of the ICF Checklist and, by rating the recorded difficulty to perform specific tasks with or without help, these were then taken as performance and capacity respectively. A global ICF score was also derived, albeit lacking data for d1, "Learning and applying knowledge", d8, "Major Life Areas" and d9, "Community, Social and Civic Life". Data were grouped by sex, age, residence and initial positive screening, and prevalence figures were calculated by disability level both for the general population, using the originally designed weights, and for the population that had screened positive to disability. Data for institutionalised persons were processed separately. Results Crude prevalence of ICF severe/complete and moderate disability among the community-dwelling population aged ≥6 years was 0.9%-2.2% respectively, and that of severe/complete disability among persons living in sheltered accommodation was 0.3%. Prevalence of severe/complete disability was: higher in women than in men, 0.8% vs. 0.4%; increased with age; and was particularly high in domains such as "Domestic Life", 3.4%, "Mobility", 1.8%, and "Self-care", 1.9%, in

Prevalence and features of ICF-disability in Spain as captured by the 2008 National Disability Survey

Science.gov (United States)

2011-01-01

Background Since 1986, the study of disability in Spain has been mainly addressed by National Disability Surveys (NDSs). While international attempts to frame NDS designs within the International Classification of Functioning, Disability and Health (ICF) have progressed, in general, the ICF has hardly been used in either the NDS or epidemiological studies. This study sought to identify ICF Activity- and Participation-related content in the most recent Spanish NDS, the 2008 Survey on Disabilities, Independence and Dependency Situations (Encuesta sobre discapacidades, autonomía personal y situaciones de Dependencia - EDAD 2008), and estimate the prevalence of such ICF-framed disability. Methods EDAD 2008 methods and questions were perused. Of the 51 EDAD items analysed, 29 were backcoded to specific d2-d7 domains of the ICF Checklist and, by rating the recorded difficulty to perform specific tasks with or without help, these were then taken as performance and capacity respectively. A global ICF score was also derived, albeit lacking data for d1, "Learning and applying knowledge", d8, "Major Life Areas" and d9, "Community, Social and Civic Life". Data were grouped by sex, age, residence and initial positive screening, and prevalence figures were calculated by disability level both for the general population, using the originally designed weights, and for the population that had screened positive to disability. Data for institutionalised persons were processed separately. Results Crude prevalence of ICF severe/complete and moderate disability among the community-dwelling population aged ≥6 years was 0.9%-2.2% respectively, and that of severe/complete disability among persons living in sheltered accommodation was 0.3%. Prevalence of severe/complete disability was: higher in women than in men, 0.8% vs. 0.4%; increased with age; and was particularly high in domains such as "Domestic Life", 3.4%, "Mobility", 1.8%, and "Self-care", 1.9%, in which prevalence decreased

Identification of relevant ICF categories by patients in the acute hospital.

Science.gov (United States)

Grill, Eva; Huber, Erika Omega; Stucki, Gerold; Herceg, Malvina; Fialka-Moser, Veronika; Quittan, Michael

To describe functioning and health of patients in the acute hospital and to identify the most common problems using the International Classification of Functioning, Disability and Health (ICF). Cross-sectional survey in a convenience sample of neurological, musculoskeletal and cardiopulmonary patients requiring rehabilitation in the acute hospital. The second level categories of the ICF were used to collect information on patients' problems. For the ICF components Body Functions, Body Structures and Activities and Participation absolute and relative frequencies of impairments/limitations in the study population were reported. For the component Environmental Factors absolute and relative frequencies of perceived barriers or facilitators were reported. The mean age in the sample was 57.6 years with a median age of 60.5, 49% of the patients were female. In 101 patients with neurological conditions, 115 ICF categories had a prevalence of 30% and more: 32 categories of Body Functions, 13 categories of Body Structures, 32 categories of Activities and Participation and 38 categories of Environmental Factors. In 105 patients with cardiopulmonary conditions, 80 categories had a prevalence of 30% and more: 36 categories of Body Functions, eight categories of Body Structures, 10 categories of Activities and Participation and 26 categories of Environmental Factors. In 90 patients with musculoskeletal conditions, 61 categories had a prevalence of 30% and more: 14 categories of Body Functions, five categories of Body Structures, 16 categories of Activities and Participation and 26 categories of Environmental Factors. This study is a first step towards the development of ICF Core Sets for patients in the acute hospital.

Comparison of three ICF reactor designs

International Nuclear Information System (INIS)

Hogan, W.J.

1984-01-01

Three concepts for inertial confinement fusion (ICF) reactors are described and compared with each other, and with magnetic fusion and fission reactors on the basis of environmental impact, safety and efficiency. The critical technical developments of each concept are described. The three concepts represent alternative development paths for inertial fusion

Introduction to the physics of ICF capsules

International Nuclear Information System (INIS)

Lindl, J.D.

1989-01-01

Inertial Confinement Fusion is an approach to fusion which relies on the inertia of the fuel mass to provide confinement. To achieve conditions under which this confinement is sufficient for efficient thermonuclear burn, high gain ICF targets designed to be imploded directly by laser light. These capsules are generally a spherical shell which is filled with low density DT gas. The shell is composed of an outer region which forms the ablator and an inner region of frozen or liquid DT which forms the main fuel. Energy from the driver is delivered to the ablator which heats up and expands. As the ablator expands and blows outward, the rest of the shell is forced inward to conserve momentum. In this implosion process, several features are important. We define the in-flight-aspect-ratio (IFAR) as the ratio of the shell radius R as it implodes to its thickness ΔR. Hydrodynamic instabilities during the implosion impose limits on this ratio which results in a minimum pressure requirement of about 100 Mbar. The convergence ratio is defined as the ratio of the initial outer radius of the ablator to the final compressed radius of the hot spot. This hot spot is the central region of the compressed fuel which is required to ignite the main fuel in high gain designs. Typical convergence ratios are 30--40. To maintain a nearly spherical shape during the implosion, when convergence ratios are this large, the flux delivered to the capsule must be uniform to a few percent. The remainder of this paper discusses the conditions necessary to achieve thermonuclear ignition in these ICF capsules

[Application of the International Classification of Functioning, Disability and Health (ICF) in Psychosomatic Rehabilitation and Addiction Rehabilitation in Germany - The Current State].

Science.gov (United States)

Spies, M; Brütt, A L; Freitag, M; Buchholz, A

2015-10-01

The aim of this study was to gather information on the current state of the implementation of the International Classification of Functioning, Disability and Health (ICF) in psychosomatic and addiction rehabilitation. In the summer of 2013, rehabilitation clinics in Germany were surveyed online on their ICF utilization. The questionnaire covered scope and purpose of ICF use, application of ICF core sets and assessments as well as barriers to the use of ICF. Of 359 clinics invited, 104 (30%) participated in the survey. Of those surveyed, 60 (61.9%) claimed to have taken measures to implement the ICF in their clinic; only 37 (38.5%), however, reported using the ICF in their daily work. The main barriers identified were complexity of the ICF, time management issues and training deficits. Approaches to ICF use are not uniform. There is a need for training programs, and guidance from health care insurance providers could help towards uniform implementation of the ICF. © Georg Thieme Verlag KG Stuttgart · New York.

Assessment of functioning in patients with schizophrenia and schizoaffective disorder with the Mini-ICF-APP: a validation study in Italy.

Science.gov (United States)

Pinna, Federica; Fiorillo, Andrea; Tusconi, Massimo; Guiso, Beatrice; Carpiniello, Bernardo

2015-01-01

The aim of the study was to evaluate validity of the Italian Mini-ICF-APP (Mini-ICF Rating for Limitations of Activities and Participation in Psychological Disorders) in schizophrenia and related disorders. 74 outpatients affected by schizophrenia or schizoaffective disorders attending a University-based community mental health centre were recruited to the study. All participants underwent comprehensive evaluation using standardized instruments to assess clinical, neurocognitive and functional status. Concurrent validity of Mini-ICF-APP was evaluated and compared to severity scores obtained using the Clinical Global Impression-Schizophrenia scale (CGI-SCH), Positive and Negative Syndrome scale (PANSS), Mini Mental State Examination test (MMSE), Brief Assessment of Cognition in Schizophrenia scale (BACS) and Personal and Social Performance scale (PSP). Construct validity was evaluated by comparing scores obtained at Mini-ICF-APP by remitted versus non-remitted patients, and by recovered versus unrecovered patients. Discriminant validity was evaluated comparing scores on Mini-ICF-APP and Subjective Well-being (SWN) scale. the total score and 12 out of the 13 Mini-ICF-APP items correlated significantly with total score at PSP; Mini-ICF-App total score was moreover significantly correlated with total scores at CGI-SCH, PANSS, MMSE, as well as with several BACS items. Total scores obtained at Mini-ICF-APP were significantly higher among remitted and recovered patients. No relevant correlations were found between scores of Mini-ICF-APP and SWN scales. The total score and 12 out of the 13 Mini-ICF-APP items correlated significantly with total score at PSP; Mini-ICF-App total score was moreover significantly correlated with total scores at CGI-SCH, PANSS, MMSE, as well as with several BACS items. Total scores obtained at Mini-ICF-APP were significantly higher among remitted and recovered patients. No relevant correlations were found between scores of Mini-ICF-APP and SWN

Review Article: Mapping of children's health and development data on population level using the classification system ICF-CY.

Science.gov (United States)

Ståhl, Ylva; Granlund, Mats; Gäre-Andersson, Boel; Enskär, Karin

2011-02-01

The aim of this study was to investigate if essential health and development data of all children in Sweden in the Child Health Service (CHS) and School Health Service (SHS) can be linked to the classification system International Classification of Functioning, Disability and Health--Children and Youth (ICF-CY). Lists of essential health terms, compiled by professionals from CHS and SHS, expected to be used in the national standardised records form the basis for the analysis in this study. The essential health terms have been linked to the codes of ICF-CY by using linking rules and a verification procedure. After exclusion of terms not directly describing children's health, a majority of the health terms could be linked into the ICF-CY with a high proportion of terms in body functions and a lower proportion in activity/participation and environment respectively. Some health terms had broad description and were linked to several ICF-CY codes. The precision of the health terms was at a medium level of detail. ICF-CY can be useful as a tool for documenting child health. It provides not only a code useful for statistical purposes but also a language useful for the CHS and SHS in their work on individual as well as population levels. It was noted that the health terms used by services mainly focused on health related to body function. This indicates that more focus is needed on health data related to child's functioning in everyday life situations.

A conceptual definition of vocational rehabilitation based on the ICF: building a shared global model.

Science.gov (United States)

Escorpizo, Reuben; Reneman, Michiel F; Ekholm, Jan; Fritz, Julie; Krupa, Terry; Marnetoft, Sven-Uno; Maroun, Claude E; Guzman, Julietta Rodriguez; Suzuki, Yoshiko; Stucki, Gerold; Chan, Chetwyn C H

2011-06-01

The International Classification of Functioning, Disability and Health (ICF) is a conceptual framework and classification system by the World Health Organization (WHO) to understand functioning. The objective of this discussion paper is to offer a conceptual definition for vocational rehabilitation (VR) based on the ICF. We presented the ICF as a model for application in VR and the rationale for the integration of the ICF. We also briefly reviewed other work disability models. Five essential elements of foci were found towards a conceptual definition of VR: an engagement or re-engagement to work, along a work continuum, involved health conditions or events leading to work disability, patient-centered and evidence-based, and is multi-professional or multidisciplinary. VR refers to a multi-professional approach that is provided to individuals of working age with health-related impairments, limitations, or restrictions with work functioning and whose primary aim is to optimize work participation. We propose that the ICF and VR interface be explored further using empirical and qualitative works and encouraging stakeholders' participation.

Progress in the US ICF Program

International Nuclear Information System (INIS)

Sluyter, M.M.

1996-01-01

The ICF Program has made exciting progress in the past year towards its goal of the achievement of fusion ignition and gain in the laboratory. A series of experiments on the Nova laser facility has resolved the major technical issues involved in the design of an ignition target. A baseline target has been designed that ignites (calculationally) with a nominal drive of 1.35 MJ (at 351 nm). In parallel, a detailed conceptual design for the National Ignition Facility (NIF-a 1.8 MJ glass laser) has been completed and a successful laser beam line prototype has validated its architecture. As a result, the Department of Energy has requested funding for the preliminary design for the NIF from the U.S. Congress. With these developments, the attainment of the long-sought goal is in sight. In addition, two new laser facilities (OMEGA Upgrade and Nike) have recently been completed, and ion-beam fusion driver development is encouraging. Their availability expands the capability of the program to perform advanced ICF and plasma experiments. copyright 1996 American Institute of Physics

Solid state laser driver for an ICF reactor

International Nuclear Information System (INIS)

Krupke, W.F.

1988-01-01

A conceptual design is presented of the main power amplifier of a multi-beamline, multi-megawatt solid state ICF reactor driver. Simultaneous achievement of useful beam quality and high average power is achieved by a proper choice of amplifier geometry. An amplifier beamline consists of a sequence of face-pumped rectangular slab gain elements, oriented at the Brewster angle relative to the beamline axis, and cooled on their large faces by helium gas that is flowing subsonically. The infrared amplifier output radiation is shifted to an appropriately short wavelength ( 10% (including all flow cooling input power) when the amplifiers are pumped by efficient high-power AlGaAs semiconductor laser diode arrays. 11 refs., 3 figs., 7 tabs

Conceptual design of ICF reactor SENRI, Part II. Advances in design and pellet gain scaling

International Nuclear Information System (INIS)

Ido, S.; Mima, K.; Nakai, S.; Tsuji, R.; Yamanaka, C.

1984-01-01

This chapter reviews the recent design studies on reactor concepts with magnetically guided lithium flow, SENRI-I, SENRI-IA and SENRI-II. The routes from the present status to power reactors and an advanced fuel pellet concept is also discussed. Topics covered include pellet design, magnetohydrodynamic design of liquid lithium flow; reactor cavity concepts with magnetically guided lithium flow, a thermo-hydraulic analysis, a tritium recovery system; and an advanced fuel pellet concept for an inertial confinement fusion (ICF) reactor without a tritium breeding blanket. An advanced fuel pellet for an ICF reactor without a T breeder was studied in the model calculations, which showed sufficiently high values of pellet gain. Includes a table and 8 diagrams

Standardised assessment of functioning in ADHD: consensus on the ICF Core Sets for ADHD.

Science.gov (United States)

Bölte, Sven; Mahdi, Soheil; Coghill, David; Gau, Susan Shur-Fen; Granlund, Mats; Holtmann, Martin; Karande, Sunil; Levy, Florence; Rohde, Luis A; Segerer, Wolfgang; de Vries, Petrus J; Selb, Melissa

2018-02-12

Attention-deficit/hyperactivity disorder (ADHD) is associated with significant impairments in social, educational, and occupational functioning, as well as specific strengths. Currently, there is no internationally accepted standard to assess the functioning of individuals with ADHD. WHO's International Classification of Functioning, Disability and Health-child and youth version (ICF) can serve as a conceptual basis for such a standard. The objective of this study is to develop a comprehensive, a common brief, and three age-appropriate brief ICF Core Sets for ADHD. Using a standardised methodology, four international preparatory studies generated 132 second-level ICF candidate categories that served as the basis for developing ADHD Core Sets. Using these categories and following an iterative consensus process, 20 ADHD experts from nine professional disciplines and representing all six WHO regions selected the most relevant categories to constitute the ADHD Core Sets. The consensus process resulted in 72 second-level ICF categories forming the comprehensive ICF Core Set-these represented 8 body functions, 35 activities and participation, and 29 environmental categories. A Common Brief Core Set that included 38 categories was also defined. Age-specific brief Core Sets included a 47 category preschool version for 0-5 years old, a 55 category school-age version for 6-16 years old, and a 52 category version for older adolescents and adults 17 years old and above. The ICF Core Sets for ADHD mark a milestone toward an internationally standardised functional assessment of ADHD across the lifespan, and across educational, administrative, clinical, and research settings.

Exponential yield sensitivity to long-wavelength asymmetries in three-dimensional simulations of inertial confinement fusion capsule implosions

Energy Technology Data Exchange (ETDEWEB)

Haines, Brian M., E-mail: bmhaines@lanl.gov [Los Alamos National Laboratory, MS T087, Los Alamos, New Mexico 87545 (United States)

2015-08-15

In this paper, we perform a series of high-resolution 3D simulations of an OMEGA-type inertial confinement fusion (ICF) capsule implosion with varying levels of initial long-wavelength asymmetries in order to establish the physical energy loss mechanism for observed yield degradation due to long-wavelength asymmetries in symcap (gas-filled capsule) implosions. These simulations demonstrate that, as the magnitude of the initial asymmetries is increased, shell kinetic energy is increasingly retained in the shell instead of being converted to fuel internal energy. This is caused by the displacement of fuel mass away from and shell material into the center of the implosion due to complex vortical flows seeded by the long-wavelength asymmetries. These flows are not fully turbulent, but demonstrate mode coupling through non-linear instability development during shell stagnation and late-time shock interactions with the shell interface. We quantify this effect by defining a separation lengthscale between the fuel mass and internal energy and show that this is correlated with yield degradation. The yield degradation shows an exponential sensitivity to the RMS magnitude of the long-wavelength asymmetries. This strong dependence may explain the lack of repeatability frequently observed in OMEGA ICF experiments. In contrast to previously reported mechanisms for yield degradation due to turbulent instability growth, yield degradation is not correlated with mixing between shell and fuel material. Indeed, an integrated measure of mixing decreases with increasing initial asymmetry magnitude due to delayed shock interactions caused by growth of the long-wavelength asymmetries without a corresponding delay in disassembly.

Core science and technology development plan for indirect-drive ICF ignition. Revision 1

Energy Technology Data Exchange (ETDEWEB)

Powell, H.T.; Kilkenny, J.D. [eds.

1995-12-01

To define the development work needed to support inertial confinement fusion (ICF) program goals, the authors have assembled this Core Science and Technology (CS and T) Plan that encompasses nearly all science research and technology development in the ICF program. The objective of the CS and T Plan described here is to identify the development work needed to ensure the success of advanced ICF facilities, in particular the National Ignition Facility (NIF). This plan is intended as a framework to facilitate planning and coordination of future ICF programmatic activities. The CS and T Plan covers all elements of the ICF program including laser technology, optic manufacturing, target chamber, target diagnostics, target design and theory, target components and fabrication, and target physics experiments. The CS and T Plan has been divided into these seven different technology development areas, and they are used as level-1 categories in a work breakdown structure (WBS) to facilitate the organization of all activities in this plan. The scope of the CS and T Plan includes all research and development required to support the NIF leading up to the activation and initial operation as an indirect-drive facility. In each of the CS and T main development areas, the authors describe the technology and issues that need to be addressed to achieve NIF performance goals. To resolve all issues and achieve objectives, an extensive assortment of tasks must be performed in a coordinated and timely manner. The authors describe these activities and present planning schedules that detail the flow of work to be performed over a 10-year period corresponding to estimated time needed to demonstrate fusion ignition with the NIF. Besides the benefits to the ICF program, the authors also discuss how the commercial sector and the nuclear weapons science may profit from the proposed research and development program.

Core science and technology development plan for indirect-drive ICF ignition. Revision 1

International Nuclear Information System (INIS)

Powell, H.T.; Kilkenny, J.D.

1995-12-01

To define the development work needed to support inertial confinement fusion (ICF) program goals, the authors have assembled this Core Science and Technology (CS and T) Plan that encompasses nearly all science research and technology development in the ICF program. The objective of the CS and T Plan described here is to identify the development work needed to ensure the success of advanced ICF facilities, in particular the National Ignition Facility (NIF). This plan is intended as a framework to facilitate planning and coordination of future ICF programmatic activities. The CS and T Plan covers all elements of the ICF program including laser technology, optic manufacturing, target chamber, target diagnostics, target design and theory, target components and fabrication, and target physics experiments. The CS and T Plan has been divided into these seven different technology development areas, and they are used as level-1 categories in a work breakdown structure (WBS) to facilitate the organization of all activities in this plan. The scope of the CS and T Plan includes all research and development required to support the NIF leading up to the activation and initial operation as an indirect-drive facility. In each of the CS and T main development areas, the authors describe the technology and issues that need to be addressed to achieve NIF performance goals. To resolve all issues and achieve objectives, an extensive assortment of tasks must be performed in a coordinated and timely manner. The authors describe these activities and present planning schedules that detail the flow of work to be performed over a 10-year period corresponding to estimated time needed to demonstrate fusion ignition with the NIF. Besides the benefits to the ICF program, the authors also discuss how the commercial sector and the nuclear weapons science may profit from the proposed research and development program

Optical design of Kirkpatrick-Baez microscope for ICF

International Nuclear Information System (INIS)

Mu Baozhong; Yi Shengzhen; Huang Shengling; Wang Zhanshan

2008-01-01

A new flux-resolution optical design method of Kirkpatrick-Baez microscope (KB microscope) is proposed. In X-ray imaging diagnostics of inertial confinement fusion(ICF), spatial resolution and flux are always the key parameters. While the traditional optical design of KB microscope is to correct on-axis spherical aberration and astigmatic aberration, flux-resolution method is based on lateral aberration of full field and astigmatic aberration. Thus the spatial resolution related to field dimension and light flux can be estimated. By the expressions of spatial resolution and actual limits in ICF, rules of how to set original structure and optical design flow are summarized. An instance is presented and it shows that the design has met the original targets and overcome the shortcomings of image characterization in compressed core by traditional spherical aberration correction. (authors)

Type C investigation of electrical fabrication projects in ICF Kaiser shops

International Nuclear Information System (INIS)

Huckfeldt, R.A.

1995-06-01

A Type C Investigation Board was convened to investigate an electrical miswiring problem found during the operation of the electrical distribution trailer for the TWRS Rotary Mode Core Sampling Truck number-sign 2. The trailer was designed by WHC and fabricated ICF KH on site for use in the Characterization Program. This problem resulted in a serious safety hazard since the support truck frame/chassis became electrically energized. This final report provides results of the ''Type C Investigation, Electrical Fabrication Projects in ICF KH Shops, June, 1995.'' It contains the investigation scope, executive summary, relevant facts, analysis, conclusions and corrective actions. DOE Order 5484.1, ''Environmental Protection, Safety and Health Protection Information Reporting Requirements,'' was followed in preparation of this report. Because the incident was electrical in nature and involved both Westinghouse Hanford Company and ICF Kaiser Hanford organizations, the board included members from both contractors and members with considerable electrical expertise

The International Classification of Functioning, Disability and Health (ICF) and nursing.

Science.gov (United States)

Kearney, Penelope M; Pryor, Julie

2004-04-01

Nursing conceptualizes disability from largely medical and individual perspectives that do not consider its social dimensions. Disabled people are critical of this paradigm and its impact on their health care. The aims of this paper are to review the International Classification of Functioning, Disability and Health (ICF), including its history and the theoretical models upon which it is based and to discuss its relevance as a conceptual framework for nursing. The paper presents a critical overview of concepts of disability and their implications for nursing and argues that a broader view is necessary. It examines ICF and its relationship to changing paradigms of disability and presents some applications for nursing. The ICF, with its acknowledgement of the interaction between people and their environments in health and disability, is a useful conceptual framework for nursing education, practice and research. It has the potential to expand nurses' thinking and practice by increasing awareness of the social, political and cultural dimensions of disability.

Identification of relevant ICF categories by geriatric patients in an early post-acute rehabilitation facility.

Science.gov (United States)

Grill, Eva; Stucki, Gerold; Boldt, Christine; Joisten, Susanne; Swoboda, Walter

To describe functioning and health of elderly patients in an early post-acute rehabilitation facility and to identify the most common problems using the International Classification of Functioning, Disability and Health (ICF). Cross-sectional survey in a convenience sample of elderly patients requiring rehabilitation in an early post-acute rehabilitation facility. The second-level categories of the ICF were used to collect information on patients' problems. For the ICF components Body Functions, Body Structures and Activities and Participation, absolute and relative frequencies of impairments/limitations in the study population were reported. For the component Environmental Factors absolute and relative frequencies of perceived barriers or facilitators were reported. The mean age in the sample was 79.9 years. Sixty-nine percent of the patients were female. In 150 patients, 82 ICF categories (34%) had a prevalence of 30% or above. The 82 categories included 22 categories (45%) of the component Body Functions, six categories (15%) of the component Body Structures, 25 categories (34%) of the component Activities and Participation and 29 (57%) categories of the component Environmental Factors. This study is a first step towards the development of ICF Core Sets for geriatric patients in early post-acute rehabilitation facilities.

Towards the joint use of ICD and ICF: a call for contribution.

Science.gov (United States)

Kohler, Friedbert; Selb, Melissa; Escorpizo, Reuben; Kostanjsek, Nenad; Stucki, Gerold; Riberto, Marcelo

2012-10-01

To optimize patient functioning, rehabilitation professionals often rely on measurements of functioning as well as on classifications. Although the International Classification of Diseases (ICD) and the International Classification of Functioning, Disability and Health (ICF) are used, their joint use has yet to become an established practice. To encourage their joint use in daily practice, the World Health Organization (WHO) has invited all rehabilitation practitioners worldwide to support the ICD-11 revision process by identifying the ICF categories that correspond to specific rehabilitation-relevant health conditions. The first step in completing this task, generating the list of these health conditions, was taken at a February 2012 workshop in São Paulo, Brazil. The objectives of this paper are to present the results of the São Paulo workshop, and to invite practitioners to participate in the ICD-ICF joint use initiative. Alternating plenary and small working group sessions were held and 103 rehabilitation-relevant health conditions were identified. With this list available, WHO together with the International Society of Physical and Rehabilitation Medicine (ISPRM), is reaching out to clinicians of all rehabilitation disciplines to take on the challenge of identifying the ICF categories for at least one of the health conditions listed.

Towards an ICF core set for ADHD: a worldwide expert survey on ability and disability.

Science.gov (United States)

de Schipper, Elles; Mahdi, Soheil; Coghill, David; de Vries, Petrus J; Gau, Susan Shur-Fen; Granlund, Mats; Holtmann, Martin; Karande, Sunil; Levy, Florence; Almodayfer, Omar; Rohde, Luis; Tannock, Rosemary; Bölte, Sven

2015-12-01

This is the second in a series of four empirical studies designed to develop International Classification of Functioning, Disability and Health (ICF and Children and Youth version, ICF-CY) core sets for attention deficit hyperactivity disorder (ADHD). The objective of this stage was to gather the opinions from international experts on which ability and disability concepts were considered relevant to functioning in ADHD. An email-based survey was carried out amongst international experts in ADHD. Relevant functional ability and disability concepts were extracted from their responses and linked to the ICF/-CY categories by two independent researchers using a standardised linking procedure. 174 experts from 11 different disciplines and 45 different countries completed the survey. Meaningful concepts identified in their responses were linked to 185 ICF/-CY categories. Of these, 83 categories were identified by at least 5 % of the experts and considered the most relevant to ADHD: 30 of these were related to Body functions (most identified: attention functions, 85 %), 30 to Activities and Participation (most identified: school education, 52 %), 20 to Environmental factors (most identified: support from immediate family, 61 %), and 3 to Body structures (most identified: structure of brain, 83 %). Experts also provided their views on particular abilities related to ADHD, naming characteristics such as high-energy levels, flexibility and resiliency. Gender differences in the expression of ADHD identified by experts pertained mainly to females showing more internalising (e.g. anxiety, low self-esteem) and less externalising behaviours (e.g. hyperactivity), leading to a risk of late- and under-diagnosis in females. Results indicate that the impact of ADHD extends beyond the core symptom domains, into all areas of life and across the lifespan. The current study in combination with three additional preparatory studies (comprehensive scoping review, focus groups, clinical study

Rett and ICF syndromes: methylation moves into medicine

Indian Academy of Sciences (India)

Two human genetic disorders, Rett and ICF syndromes, have recently been shown to be ... normally until 6–18 months of age, then gradually loose speech and ... (abnormal lateral curvature of the vertebral column), vacant stare, severe ...

ICF quarterly report January - March 1997 volume 7, number 3; TOPICAL

International Nuclear Information System (INIS)

Murray, J

1998-01-01

The National Ignition Facility Project The mission of the National Ignition Facility (NIF) is to produce ignition and modest energy gain in inertial confinement fusion (ICF) targets. Achieving these goals will maintain U.S. world leadership in ICF and will directly benefit the U.S. Department of Energy (DOE) missions in national security, science and technology, energy resources, and industrial competitiveness. Development and operation of the NIF are consistent with DOE goals for environmental quality, openness to the community, and nuclear nonproliferation and arms control. Although the primary mission of inertial fusion is for defense applications, inertial fusion research will provide critical information for the development of inertial fusion energy. The NIF, under construction at Lawrence Livermore National Laboratory (LLNL), is a cornerstone of the DOE's science-based Stockpile Stewardship Program for addressing high-energy-density physics issues in the absence of nuclear weapons testing. In pursuit of this mission, the DOE's Defense Programs has developed a state-of-the-art capability with the NIF to investigate high-energy-density physics in the laboratory with a microfusion capability for defense and energy applications. As a Strategic System Acquisition, the NIF Project has a separate and disciplined reporting chain to DOE as shown below

The impact of age and gender on the ICF-based assessment of chronic low back pain.

Science.gov (United States)

Fehrmann, Elisabeth; Kotulla, Simone; Fischer, Linda; Kienbacher, Thomas; Tuechler, Kerstin; Mair, Patrick; Ebenbichler, Gerold; Paul, Birgit

2018-01-12

To evaluate the impact of age and gender on the international classification of functioning, disability and health (ICF)-based assessment for chronic low back pain. Two hundred forty-four chronic low back pain patients (52% female) with a mean age of 49 years (SD =17.64) were interviewed with the comprehensive ICF core set for activities and participation, and environmental factors. After conducting explorative factor analysis, the impact of age and gender on the different factors was analyzed using analyzes of variances. Results revealed that older patients experienced more limitations within "self-care and mobility" and "walking" but less problems with "transportation" compared to younger patients. Older or middle-aged low back pain patients further perceived more facilitation through "architecture and products for communication", "health services", and "social services and products for mobility" than younger patients. Regarding gender differences, women reported more restriction in "housework" than men. An interaction effect between age and gender was found for "social activities and recreation" with young male patients reporting the highest impairment. The study demonstrated that the comprehensive ICF core set classification for chronic low back pain is influenced by age and gender. This impact is relevant for ICF-based assessments in clinical practice, and should be considered in intervention planning for rehabilitative programs. Implications for rehabilitation It is important to consider age and gender differences when classifying with the ICF. The intervention planning based on the ICF should focus on improvement of bodily functioning and mobility in older patients, facilitation of household activities in women, consideration of work-life balance and recreation (e.g., through mindfulness based stress reduction), and reduction of dissatisfaction with rehabilitation in younger patients. It is important to offer patients the opportunity to participate in

ICF implosion hotspot ion temperature diagnostic techniques based on neutron time-of-flight method

International Nuclear Information System (INIS)

Tang Qi; Song Zifeng; Chen Jiabin; Zhan Xiayu

2013-01-01

Ion temperature of implosion hotspot is a very important parameter for inertial confinement fusion. It reflects the energy level of the hotspot, and it is very sensitive to implosion symmetry and implosion speed. ICF implosion hotspot ion temperature diagnostic techniques based on neutron time-of-flight method were described. A neutron TOF spectrometer was developed using a ultrafast plastic scintillator as the neutron detector. Time response of the spectrometer has 1.1 ns FWHM and 0.5 ns rising time. TOF spectrum resolving method based on deconvolution and low pass filter was illuminated. Implosion hotspot ion temperature in low neutron yield and low ion temperature condition at Shenguang-Ⅲ facility was acquired using the diagnostic techniques. (authors)

Comparing contents of outcome measures in cerebral palsy using the International Classification of Functioning (ICF-CY): a systematic review.

Science.gov (United States)

Schiariti, Veronica; Klassen, Anne F; Cieza, Alarcos; Sauve, Karen; O'Donnell, Maureen; Armstrong, Robert; Mâsse, Louise C

2014-01-01

The International Classification of Functioning children and youth version (ICF-CY) provides a universal framework for defining and classifying functioning and disability in children worldwide. To facilitate the application of the ICF in practice, ICF based-tools like the "ICF Core Sets" are being developed. In the context of the development of the ICF-CY Core Sets for children with Cerebral Palsy (CP), the aims of this study were as follows: to identify and compare the content of outcome measures used in studies of children with CP using the ICF-CY coding system; and to describe the most frequently addressed areas of functioning in those studies. We searched multiple databases likely to capture studies involving children with CP from January 1998 to March 2012. We included all English language articles that studied children aged 2-18 years and described an interventional or observational study. Constructs of the outcome measures identified in studies were linked to the ICF-CY by two trained professionals. We found 231 articles that described 238 outcome measures. The outcome measures contained 2193 concepts that were linked to the ICF-CY and covered 161 independent ICF-CY categories. Out of the 161 categories, 53 (33.5%) were related to body functions, 75 (46%) were related to activities/participation, 26 (16.1%) were related to environmental factors, and 7 (4.3%) were related to body structures. This systematic review provides information about content of measures that may guide researchers and clinicians in their selection of an outcome measure for use in a study and/or clinical practice with children with CP. Copyright © 2013 European Paediatric Neurology Society. Published by Elsevier Ltd. All rights reserved.

Classical and Ablative Richtmyer-Meshkov Instability and Other ICF-Relevant Plasma Flows Diagnosed With Monochromatic X-Ray Imaging

National Research Council Canada - National Science Library

Aglitskiy, Y; Karasik, M; Velikovich, A. L; Metzler, N; Zalesak, S; Schmitt, A. J; Gardner, J. H; Serlin, V; Weaver, J; Obenschain, S. P

2007-01-01

In inertial confinement fusion (ICF) and high-energy density physics (HEDP), the most important manifestations of the hydrodynamic instabilities and other mixing processes involve lateral motion of the accelerated plasmas...

Health promotion and education: application of the ICF in the US and Canada using an ecological perspective.

Science.gov (United States)

Howard, David; Nieuwenhuijsen, Els R; Saleeby, Patricia

2008-01-01

Health promotion is an issue comprised of complex and multi-layered concepts that involves a process of enabling people to increase control over and improve their health. The aims and applications of the World Health Organization's International Classification of Functioning, Disability and Health (ICF), with its focus on components of functioning, activities and participation, and environmental factors are salient to health promotion and health education efforts. For individuals with or without disabilities, health promotion occurs within the community in which they reside and is influenced by a complex interaction of personal and environmental factors. The aim of this paper is to discuss how the ICF can be useful in enhancing social change through health promotion and health education for all people, in particular those with disabilities and chronic conditions. In doing so health promotion concepts and the ecological approach linked with the ICF, the relationship of social change and social support to the ICF, the potential role of the ICF for national and local (city) policies, and the role of health professionals in this process will be examined. Building on this body of knowledge, the authors recommend that future research should focus on the relationship between policies and the social participation of people with disabilities in the community, the use of ICF measurement tools to improve the indicators established by the National Organization on Disability, the development of a new ICF core set for community accessibility and inclusion, better interventions to enhance social support, and enhancing the role of professionals in health promotion for people with disabilities or chronic health conditions.

An examination of concepts in vocational rehabilitation that could not be linked to the ICF based on an analysis of secondary data.

Science.gov (United States)

Finger, Monika; de Bie, Robert; Selb, Melissa; Escorpizo, Reuben

2016-02-15

In the last few years the International Classification of Functioning, Disability and Health (ICF) has become a widely known and useful reference classification in vocational rehabilitation. It would be equally important to know which aspects of work-related health information cannot be assigned to distinct ICF categories. The objective of this study is to examine the concepts derived from three studies conducted within the ICF Core Set for vocational rehabilitation project, which could not be linked to distinct ICF codes in order to complement the current understanding of functioning in vocational rehabilitation. Secondary data analysis of the concepts from the systematic literature review, expert survey and patient focus group study of the ICF Core Set for vocational rehabilitation project that were marked as nd = not definable, nc = not covered or pf = personal factor. Nd-concepts were assigned to the biopsychosocial model of the ICF; additional ICF categories were formulated where needed. Nc-concepts were grouped into common themes not covered by the ICF. Pf-categories were linked to a proposed personal factors classification. 1093 nd-concepts were matched to overarching terms in the ICF, and "other specified"-categories were detailed. 1924 pf-concepts were linked to 31 second level categories of a proposed personal factors classification. 441 nc-concepts were grouped into six themes including the concept of well-being and attributes related to processes and time. With concepts that emerged from the secondary analysis of data gathered during the vocational rehabilitation ICF Core Set project, we have enriched the ICF model with constructs specific to vocational rehabilitation. However, additional research is needed to further explore personal factors specific to vocational rehabilitation. The influence of themes complementary to the ICF such as well-being and quality of life on return-to-work should be further investigated.

Management a marketing sportovní akce: ICF Slalom World Ranking Race Prague 2009

OpenAIRE

Kubričan, Lukáš

2009-01-01

Title: Management and marketing of sport's event: ICF Slalom World Ranking Race Prague 2009 Objectives: Present strengths and weaknesses of ICF Slalom World Ranking Race Prague 2009 based on analyse of recent years and present ideas for its improvement. Methods: Descriptive analysis, SWOT analysis and interview with expert. Results: Conclusion and advices for organizers of sport's events. Key words: Management, marketing, SWOT analysis, descriptive analysis, sport's event, canoe slalom compet...

Measuring the shock impedance mismatch between high-density carbon and deuterium at the National Ignition Facility

Science.gov (United States)

Millot, M.; Celliers, P. M.; Sterne, P. A.; Benedict, L. X.; Correa, A. A.; Hamel, S.; Ali, S. J.; Baker, K. L.; Berzak Hopkins, L. F.; Biener, J.; Collins, G. W.; Coppari, F.; Divol, L.; Fernandez-Panella, A.; Fratanduono, D. E.; Haan, S. W.; Le Pape, S.; Meezan, N. B.; Moore, A. S.; Moody, J. D.; Ralph, J. E.; Ross, J. S.; Rygg, J. R.; Thomas, C.; Turnbull, D. P.; Wild, C.; Eggert, J. H.

2018-04-01

Fine-grained diamond, or high-density carbon (HDC), is being used as an ablator for inertial confinement fusion (ICF) research at the National Ignition Facility (NIF). Accurate equation of state (EOS) knowledge over a wide range of phase space is critical in the design and analysis of integrated ICF experiments. Here, we report shock and release measurements of the shock impedance mismatch between HDC and liquid deuterium conducted during shock-timing experiments having a first shock in the ablator ranging between 8 and 14 Mbar. Using ultrafast Doppler imaging velocimetry to track the leading shock front, we characterize the shock velocity discontinuity upon the arrival of the shock at the HDC/liquid deuterium interface. Comparing the experimental data with tabular EOS models used to simulate integrated ICF experiments indicates the need for an improved multiphase EOS model for HDC in order to achieve a significant increase in neutron yield in indirect-driven ICF implosions with HDC ablators.

Decoding using back-project algorithm from coded image in ICF

International Nuclear Information System (INIS)

Jiang shaoen; Liu Zhongli; Zheng Zhijian; Tang Daoyuan

1999-01-01

The principle of the coded imaging and its decoding in inertial confinement fusion is described simply. The authors take ring aperture microscope for example and use back-project (BP) algorithm to decode the coded image. The decoding program has been performed for numerical simulation. Simulations of two models are made, and the results show that the accuracy of BP algorithm is high and effect of reconstruction is good. Thus, it indicates that BP algorithm is applicable to decoding for coded image in ICF experiments

Effects on Implosion Characteristics of High-Z Dopant Profiles in ICF Ignition Capsule Ablators

Science.gov (United States)

Li, Yongsheng; Wang, Min; Gu, Jianfa; Zou, Shiyang; Kang, Dongguo; Ye, Wenhua; Zhang, Weiyan

2012-10-01

For ignition target design (ITD) of indirect drive ICF [J. Lindl, PoP 2, 3933(1995)], high-Z dopants in capsule ablators were used to prevent preheat of DTadjacentablators by Au M-band flux in laser-driven gold Hohlraums, therefore to restrain the growth of high-mode hydro-instabilities and to improve the targetrobustness.Based on NIC's Rev. 5 ITD[S. W. Haan et al., PoP 18, 051001(2011)], we investigated the effect of thickness and dopant concentration of doped layers on implosion characteristics, including the Atwood number (AWN) of fuel-ablator interface, the density gradient scale length (DGSL) of ablation front and the implosion velocity (VIM); all three variables decrease with increment of dopant dosage, and increase with dopant concentration while keeping dosage constant. Since a smaller AWN, a larger DGSL, and a faster VIM always characterize a more robust ITD, one should make tradeoff among them by adjusting the dopant profiles in ablators.A Gaussian spectrum (GS) was used to imitate the Au M-band flux [Y. S. Li et al., PoP 18, 022701(2011)], and the impact of GScenter on implosion characteristics of Rev. 5 ITD was studied while moving the GScenter towards higher energy, the ablatorpreheat got severe, AWN got larger, DGSL got larger, and VIM got faster.

Towards a standardized nutrition and dietetics terminology for clinical practice: An Austrian multicenter clinical documentation analysis based on the International Classification of Functioning, Disability and Health (ICF)-Dietetics.

Science.gov (United States)

Gäbler, Gabriele; Coenen, Michaela; Lycett, Deborah; Stamm, Tanja

2018-03-03

High quality, continuity and safe interdisciplinary healthcare is essential. Nutrition and dietetics plays an important part within the interdisciplinary team in many health conditions. In order to work more effectively as an interdisciplinary team, a common terminology is needed. This study investigates which categories of the ICF-Dietetics are used in clinical dietetic care records in Austria and which are most relevant to shared language in different medical areas. A national multicenter retrospective study was conducted to collect clinical dietetic care documentation reports. The analysis included the "best fit" framework synthesis, and a mapping exercise using the ICF Linking Rules. Medical diagnosis and intervention concepts were excluded from the mapping, since they are not supposed to be classified by the ICF. From 100 dietetic records, 307 concepts from 1807 quotations were extracted. Of these, 241 assessment, dietetics diagnosis, goal setting and evaluation concepts were linked to 153 ICF-Dietetics categories. The majority (91.3%) could be mapped to a precise ICF-Dietetics category. The highest number of ICF-Dietetics categories was found in the medical area of diabetes and metabolism and belonged to the ICF component Body Function, while very few categories were used from the component Participation and Environmental Factors. The integration of the ICF-Dietetics in nutrition and dietetic care process is possible. Moreover, it could be considered as a conceptual framework for interdisciplinary nutrition and dietetics care. However, a successful implementation of the ICF-Dietetics in clinical practice requires a paradigm shift from medical diagnosis-focused health care to a holistic perspective of functioning with more attention on Participation and Environmental Factors. Copyright © 2018 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Frost as a first wall for the ICF laboratory microfusion facility

International Nuclear Information System (INIS)

Orth, C.D.

1989-01-01

The authors introduce the concept of using frost as the first wall of the ICF Laboratory Microfusion Facility being designed to produce 200-1000 MJ of thermonuclear yield. They present one design incorporating 2cm of frost deposited at 0.1 g/cm/sup 3/ on an LN-cooled fiber-reinforced polymer substrate. They calculate that such a frost layer will protect the substrate from ablation by target x rays and debris, and from shock-induced spallation. Postshot washdown with water should permit low-activation operation, and should preserve the original wall properties. The authors expect the impact of the frost on laser optics to be minimal, and expect the preshot lifetime of thermally unprotected cryogenic targets to be extended by operating the wall at 100-150 K. Moreover, they believe that such a frost first wall involves little technical risk, and will be inexpensive to construct and operate

Frost as a first wall for the ICF Laboratory Microfusion Facility

International Nuclear Information System (INIS)

Orth, C.D.

1988-01-01

We introduce the concept of using frost as the first wall of the ICF Laboratory Microfusion Facility being designed to produce 200--1000 MJ of thermonuclear yield. We present one design incorporating 2 cm of frost deposited at 0.1 g/cm 3 on an LN-cooled fiber-reinforced polymer substrate. We calculate that such a frost layer will protect the substrate from ablation by target x rays and debris, and from shock-induced spallation. Postshot washdown with water should permit low-activation operation, and should preserve the original wall properties. We expect the impact of the frost on laser optics to be minimal, and expect the preshot lifetime of thermally unprotected cryogenic targets to be extended by operating the wall at 100-150 K. Moreover, we believe that such a frost first wall will involve little technical risk, and will be inexpensive to construct and operate. 4 refs., 1 fig

The ICF-CY and Goal Attainment Scaling: benefits of their combined use for pediatric practice.

Science.gov (United States)

McDougall, Janette; Wright, Virginia

2009-01-01

There is much heterogeneity and disconnect in the approaches used by service providers to conduct needs assessments, set goals and evaluate outcomes for clients receiving pediatric rehabilitation services. The purpose of this article is to describe how the International Classification of Functioning, Disability and Health-Child and Youth (ICF-CY) can be used in combination with Goal Attainment Scaling (GAS), an individualised measure of change, to connect the various phases of the therapeutic process to provide consistent clinical care that is family-centred, collaborative, well directed and accountable. A brief description of both the ICF-CY and GAS as they pertain to pediatric rehabilitation is provided as background. An explanation is given of how the ICF-CY offers a framework through which clients, families and service providers can together identify the areas of clients' needs. In addition, the article discusses how the use of GAS facilitates translation of clients' identified needs into distinct, measurable goals set collaboratively by clients, their families and service providers. Examples of integrated GAS goals set for the various components of the ICF-CY are provided. The utility of GAS as a measure of clinical outcomes for individual clients is also discussed. Used in combination, the ICF-CY and GAS can serve to coordinate, simplify and standardise assessment and outcome evaluation practices for individual clients receiving pediatric rehabilitation services.

Analysis of directly driven ICF targets

International Nuclear Information System (INIS)

Velarde, G.; Aragones, J.M.; Gago, J.A.

1986-01-01

The current capabilities at DENIM for the analysis of directly driven targets are presented. These include theoretical, computational and applied physical studies and developments of detailed simulation models for the most relevant processes in ICF. The simulation of directly driven ICF targets is carried out with the one-dimensional NORCLA code developed at DENIM. This code contains two main segments: NORMA and CLARA, able to work fully coupled and in an iterative manner. NORMA solves the hydrodynamic equations in a lagrangian mesh. It has modular programs couple to it to treat the laser or particle beam interaction with matter. Equations of state, opacities and conductivities are taken from a DENIM atomic data library, generated externally with other codes that will also be explained in this work. CLARA solves the transport equation for neutrons, as well as for charged particles, and suprathermal electrons using discrete ordinates and finite element methods in the computational procedure. Parametric calculations of multilayered single-shell targets driven by heavy ion beams are also analyzed. Finally, conclusions are focused on the ongoing developments in the areas of interest such as: radiation transport, atomic physics, particle in cell method, charged particle transport, two-dimensional calculations and instabilities. (author)

Moving finite element method for ICF target implosion

Science.gov (United States)

Furuta, J.; Kawata, S.; Niu, K.

1985-03-01

One dimensional hydrodynamic codes for the analysis of internal confinement fusion (ICF) target implosion which include various effects were developed, but most of them utilize the artificial viscosity (e.g., Von Neumann's viscosity) which cannot reveal accurately the shock waves. A gain of ICF target implosion is much due to the dissipation at the shock fronts, so it is necessary to express correctly the shock waves which are affected by the viscosity. The width of the shock waves is usually a few times as large as the length of mean free path, therefore the meshes for the shock waves must be set to about 10 to the 4th to 10 to the 5th power. It is a serious problem because of the computational memories or CPU time. In the moving finite element (MPE) method, both nodal amplitudes and nodal positions move continuously with time in such a way as to satisfy simultaneous ordinary differential equations (OPDs) which minimize partial differential equation (PDE) residuals.

Thermal behavior of liquid-metal film exposed to ICF spectra. Annual technical progress report, 10 August 1981-9 August 1982

International Nuclear Information System (INIS)

Kulcinski, G.L.; Hassanein, A.M.; Croessmann, C.D.

1982-08-01

The A*THERMAL code is used to calculate the temperature rise and subsequent evaporation of a liquid Pb film bombarded with ICF target debris. The usefulness of the A*THERMAL code is demonstrated by the fact that it can handle an arbitrary x-ray spectrum as well as different ion species with Maxwellian or Gaussian distributions of energies. Temperature increases resulting from the various species were combined with vapor pressure data to yield evaporation rates and the subsequent total amount of Pb vaporized from a thermonuclear explosion

[Can ICF core sets be helpful in preparing a social-medical expert report due to incapacity to work?--a first proposal].

Science.gov (United States)

Kirschneck, M; Legner, R; Armbrust, W; Nowak, D; Cieza, A

2015-04-01

Social-medical expert reports from the German statutory pension insurance are essential for the German statutory pension regulatory authority to decide whether to grant services regarding participation as well as retirement pensions due to incapacity to work.The objective of this investigation is to determine whether the ICF Core Sets and other international approaches, such as the EUMASS Core Sets or ICF Core Set for vocational rehabilitation cover the content of the social-medical expert reports as well as to propose an approach how the ICF can be economically used by the social medicine practitioner when writing a social-medical expert report. A retrospective quantitative study design was used to translate a total of 294 social-medical expert reports from patients with low back pain (LBP) or chronic widespread pain (CWP) into the language of the ICF (linking) by 2 independent health professionals and compare the results with the ICF Core Sets for specific health conditions and other international approaches. The content of social-medical expert reports was largely reflected by the condition specific brief ICF Core Sets, brief ICF Core Sets for vocational rehabilitation and EUMASS Core Sets. The weighted Kappa statistic for the agreement between the 2 health professionals who translated the expert reports were in CWP 0.69 with a bootstrapped confidence interval of 0.67-0.71 and in LBP 0.73 (0.71-0.74). The analyses show that the content of social-medical expert reports varies enormously. A combination of a condition specific brief ICF Core Set as well as vocational rehabilitation and EUMASS ICF Core Sets as well as all ICF-categories from the expert reports that were named at least in 50% of it can largely provide a basis for preparing expert reports. Within the scope of implementation the need for a specific ICF Core Set for expert reports of the German statutory pension insurance should be further analyzed and discussed. © Georg Thieme Verlag KG Stuttgart �

Comparison of high-density carbon implosions in unlined uranium versus gold hohlraums

Science.gov (United States)

Dewald, Eduard; Meezan, Nathan; Tommasini, Riccardo; Khan, Shahab; MacKinnon, Andrew; Berzak Hopkins, Laura; Divol, Laurent; Lepape, Sebastien; Moore, Alastair; Schneider, Marilyn; Pak, Arthur; Nikroo, Abbas; Landen, Otto

2016-10-01

In Inertial Confinement Fusion (ICF) implosions, laser energy is converted to x-ray radiation in hohlraums with High-Z walls. At radiation temperatures near 300 eV relevant for ICF experiments, the radiative losses in heating the wall are lower for U than for Au hohlraums. Furthermore, the intensity of the ``M-band'' x-rays with photon energies h ν >1.8 keV is lower for uranium, allowing for reduced capsule dopant concentrations employed to minimize inner ablator preheat and hence keep favorable fuel/ablator interface Atwood numbers. This in turn improves the ablator rocket efficiency and reduces the risk of polluting the hot-spot with emissive dopant material. The first uranium vacuum hohlraum experiments on the National Ignition Facility (NIF) with undoped high-density carbon (HDC, or diamond) capsules have demonstrated 30% lower ``M-band'' intensity relative to Au, resulting in lower inflight ablator thickness due to reduced preheat. In addition, fusion neutron yields are 2x higher in U than in Au hohlraums for D2-gas filled capsule implosions at ICF relevant velocities of 380 +/-20 km/s. These results have led the NIF ICF implosions to routinely employ U hohlraums. Prepared by LLNL under Contract DE-AC52-07NA27344.

ICF-CY as a Framework for Understanding Child Engagement in Preschool

Directory of Open Access Journals (Sweden)

Margareta Adolfsson

2018-05-01

Full Text Available Engagement in preschool predicts children's development, learning, and wellbeing in later school years. The time children engage in activities and social interactions is conditional for preschool inclusion. Engagement is part of the construct participation, which is determined by attendance and involvement. Two suggested underlying dimensions of engagement had been identified as essential when assessing children's participation in preschool activities. As engagement is a key question in inclusion of all children, and preschool becomes a common context for them, it is increasingly important to understand the concept of engagement in those settings. In Sweden most children attend preschool but children in need of special support tend not to receive enough support for their everyday functioning. This study aimed to conceptualize child engagement in preschool with ICF-CY as a framework to clarify core and developmental engagement dimensions included in Child Engagement Questionnaire (CEQ. The content of CEQ was identified through linking processes based on ICF linking rules with some exceptions. Specific challenges and solutions were acknowledged. To identify engagement dimensions in the ICF-CY, CEQ items related to ICF-CY chapters were integrated in the two-dimensional model of engagement. Findings showed that engagement measured for preschool ages was mostly related to Learning and Applying knowledge belonging to Activities and Participation but the linkage detected missing areas. Broader perspectives of children's everyday functioning require extended assessment with consideration to mutual influences between activities, participation, body functions, and contextual factors. Related to core and developmental engagement, findings highlight the importance for preschool staff to pay attention to how children do things, not only what they do. Activities related to core engagement include basic skills; those related to developmental engagement set

The Geriatric ICF Core Set reflecting health-related problems in community-living older adults aged 75 years and older without dementia: development and validation.

Science.gov (United States)

Spoorenberg, Sophie L W; Reijneveld, Sijmen A; Middel, Berrie; Uittenbroek, Ronald J; Kremer, Hubertus P H; Wynia, Klaske

2015-01-01

The aim of the present study was to develop a valid Geriatric ICF Core Set reflecting relevant health-related problems of community-living older adults without dementia. A Delphi study was performed in order to reach consensus (≥70% agreement) on second-level categories from the International Classification of Functioning, Disability and Health (ICF). The Delphi panel comprised 41 older adults, medical and non-medical experts. Content validity of the set was tested in a cross-sectional study including 267 older adults identified as frail or having complex care needs. Consensus was reached for 30 ICF categories in the Delphi study (fourteen Body functions, ten Activities and Participation and six Environmental Factors categories). Content validity of the set was high: the prevalence of all the problems was >10%, except for d530 Toileting. The most frequently reported problems were b710 Mobility of joint functions (70%), b152 Emotional functions (65%) and b455 Exercise tolerance functions (62%). No categories had missing values. The final Geriatric ICF Core Set is a comprehensive and valid set of 29 ICF categories, reflecting the most relevant health-related problems among community-living older adults without dementia. This Core Set may contribute to optimal care provision and support of the older population. Implications for Rehabilitation The Geriatric ICF Core Set may provide a practical tool for gaining an understanding of the relevant health-related problems of community-living older adults without dementia. The Geriatric ICF Core Set may be used in primary care practice as an assessment tool in order to tailor care and support to the needs of older adults. The Geriatric ICF Core Set may be suitable for use in multidisciplinary teams in integrated care settings, since it is based on a broad range of problems in functioning. Professionals should pay special attention to health problems related to mobility and emotional functioning since these are the most

Psychometric analyses to improve the Dutch ICF Activity Inventory

NARCIS (Netherlands)

Bruijning, J.E.; van Rens, G.H.M.B.; Knol, D.L.; van Nispen, R.M.A.

2013-01-01

PURPOSE: In the past, rehabilitation centers for the visually impaired used unstructured or semistructured methods to assess rehabilitation needs of their patients. Recently, an extensive instrument, the Dutch ICF Activity Inventory (D-AI), was developed to systematically investigate rehabilitation

The relevance of the International Classification of Functioning, Disability and Health (ICF) in monitoring and evaluating Community-based Rehabilitation (CBR).

Science.gov (United States)

Madden, Rosamond H; Dune, Tinashe; Lukersmith, Sue; Hartley, Sally; Kuipers, Pim; Gargett, Alexandra; Llewellyn, Gwynnyth

2014-01-01

To examine the relevance of the International Classification of Functioning, Disability and Health (ICF) to CBR monitoring and evaluation by investigating the relationship between the ICF and information in published CBR monitoring and evaluation reports. A three-stage literature search and analysis method was employed. Studies were identified via online database searches for peer-reviewed journal articles, and hand-searching of CBR network resources, NGO websites and specific journals. From each study "information items" were extracted; extraction consistency among authors was established. Finally, the resulting information items were coded to ICF domains and categories, with consensus on coding being achieved. Thirty-six articles relating to monitoring and evaluating CBR were selected for analysis. Approximately one third of the 2495 information items identified in these articles (788 or 32%) related to concepts of functioning, disability and environment, and could be coded to the ICF. These information items were spread across the entire ICF classification with a concentration on Activities and Participation (49% of the 788 information items) and Environmental Factors (42%). The ICF is a relevant and potentially useful framework and classification, providing building blocks for the systematic recording of information pertaining to functioning and disability, for CBR monitoring and evaluation. Implications for Rehabilitation The application of the ICF, as one of the building blocks for CBR monitoring and evaluation, is a constructive step towards an evidence-base on the efficacy and outcomes of CBR programs. The ICF can be used to provide the infrastructure for functioning and disability information to inform service practitioners and enable national and international comparisons.

An International Clinical Study of Ability and Disability in Autism Spectrum Disorder Using the WHO-ICF Framework

DEFF Research Database (Denmark)

Mahdi, Soheil; Albertowski, Katja; Almodayfer, Omar

2018-01-01

This is the fourth international preparatory study designed to develop International Classification of Functioning, Disability and Health (ICF, and Children and Youth version, ICF-CY) Core Sets for Autism Spectrum Disorder (ASD). Examine functioning of individuals diagnosed with ASD as documented...

Long-term ophthalmic health care in Usher syndrome type I from an ICF perspective.

Science.gov (United States)

Möller, Kerstin; Eriksson, Kristina; Sadeghi, André M; Möller, Claes; Danermark, Berth

2009-01-01

The aim was to explore ophthalmic health care in female patients with Usher Syndrome type I (USH I) over 20 years and to evaluate the relationship between the ophthalmic health care and the health state of the patients from a health perspective. A retrospective study of records from ophthalmology departments (OD) and low vision clinics (LVC) from 1985 to 2004. Assessment of the reports was performed based on the International Classification of Functioning, Disability and Health (ICF). Findings were analysed by manifest content analysis with ICF as a framework and using four themes: health care system, procedure examinations, patient's functioning and disability and procedure actions. The records of nine female patients (aged 25-39 years, 1985) with USH I were selected from the national database of USH. A great number of notes were collected (OD 344 and LVC 566). Procedure examinations were exclusively oriented towards body structure and function. All patients showed aggravated visual impairment over and above the hearing and vestibular impairment. Procedure actions were oriented towards environmental factors. No correlation was found between procedures performed and patient's experience of disability. The high degree of resource allocation was not correlated to the patients' impairment. The study indicates that the ophthalmic health care was characterised by inefficiency. This conclusion is very serious because patients very likely face severe disability and emotional difficulties. ICF is ought to be incorporated in ophthalmic health care strategy to improve the health care.

Yield degradation in inertial-confinement-fusion implosions due to shock-driven kinetic fuel-species stratification and viscous heating

Science.gov (United States)

Taitano, W. T.; Simakov, A. N.; Chacón, L.; Keenan, B.

2018-05-01

Anomalous thermonuclear yield degradation (i.e., that not describable by single-fluid radiation hydrodynamics) in Inertial Confinement Fusion (ICF) implosions is ubiquitously observed in both Omega and National Ignition experiments. Multiple experimental and theoretical studies have been carried out to investigate the origin of such a degradation. Relative concentration changes of fuel-ion species, as well as kinetically enhanced viscous heating, have been among possible explanations proposed for certain classes of ICF experiments. In this study, we investigate the role of such kinetic plasma effects in detail. To this end, we use the iFP code to perform multi-species ion Vlasov-Fokker-Planck simulations of ICF capsule implosions with the fuel comprising various hydrodynamically equivalent mixtures of deuterium (D) and helium-3 (3He), as in the original Rygg experiments [J. R. Rygg et al., Phys. Plasmas 13, 052702 (2006)]. We employ the same computational setup as in O. Larroche [Phys. Plasmas 19, 122706 (2012)], which was the first to simulate the experiments kinetically. However, unlike the Larroche study, and in partial agreement with experimental data, we find a systematic yield degradation in multi-species simulations versus averaged-ion simulations when the D-fuel fraction is decreased. This yield degradation originates in the fuel-ion species stratification induced by plasma shocks, which imprints the imploding system and results in the relocation of the D ions from the core of the capsule to its periphery, thereby reducing the yield relative to a non-separable averaged-ion case. By comparing yields from the averaged-ion kinetic simulations and from the hydrodynamic scaling, we also observe yield variations associated with ion kinetic effects other than fuel-ion stratification, such as ion viscous heating, which is typically neglected in hydrodynamic implosions' simulations. Since our kinetic simulations are driven by hydrodynamic boundary conditions at the

Resolving a central ICF issue for ignition: Implosion symmertry

International Nuclear Information System (INIS)

Cray, M.; Delamater, N.D.; Fernandez, J.C.

1994-01-01

The Los Alamos National Laboratory Inertial Confinement Fusion (ICF) Program focuses on resolving key target-physics issues and developing technology needed for the National Ignition Facility (NIF). This work is being performed in collaboration with Lawrence Livermore National Laboratory (LLNL). A major requirement for the indirect-drive NIF ignition target is to achieve the irradiation uniformity on the capsule surface needed for a symmetrical high-convergence implosion. Los Alamos employed an integrated modeling technique using the Lasnex radiation-hydrodynamics code to design two different targets that achieve ignition and moderate gain. Los Alamos is performing experiments on the Nova Laser at LLNL in order to validate our NIF ignition calculations

Absence of molecular deuterium dissociation during room-temperature permeation into polystyrene ICF target shells

International Nuclear Information System (INIS)

Honig, A.; Alexander, N.; Fan, Q.; Gram, R.; Kim, H.

1991-01-01

Polystyrene microshells filled with deuterium and tritium gas are important target shells for inertially confined fusion (ICF) and are particularly promising for target containing spin-polarized hydrogens fuels. A currently active approach to the latter uses polarized D in HD, in a method which requires preservation of the high purity of the initially prepared HD (very low specified H 2 and D 2 concentrations). This would not be possible if dissociation should occur during permeation into the target shells. We have thus tested polystyrene shells using a novel method which employs very pure polystyrene shells using a novel method which employs very pure ortho-D 2 as the test gas. An upper limit of 6 x 10 -4 was deduced for the dissociation of D 2 upon room temperature permeation through an approximately 8 um wall of polystyrene, clearing the way for use of polystyrene target shells for ICF fusion experiments with spin-polarized hydrogens fuels. 19 refs., 1 fig

ICD-11: a comprehensive picture of health, an update on the ICD-ICF joint use initiative.

Science.gov (United States)

Selb, Melissa; Kohler, Friedbert; Robinson Nicol, Molly Meri; Riberto, Marcelo; Stucki, Gerold; Kennedy, Cille; Üstün, Bedirhan

2015-01-01

This is a follow-up of the special report Towards the joint use of ICD and ICF: A call for contribution, published by the Journal of Rehabilitation Medicine in 2012, which introduced an initiative of using the International Classification of Diseases (ICD) and the International Classification of Functioning, Disability and Health (ICF) in a complementary way in clinical practice. Recognizing the merits of using the ICD and ICF jointly, the World Health Organization (WHO) introduced so-called functioning properties in the ICD-11. The first step in this ICD-ICF joint use initiative revealed 103 rehabilitation-relevant health conditions for which functioning properties were to be identified. Afterwards experts were recruited to identify the functioning properties for the health conditions for which no ICF Core Sets were available and all the functioning properties were integrated in the beta-version of ICD-11. The objective of this special report is to present the outcome of the recruitment and training of the contributing experts, and to provide an update on the current status of identifying functioning properties and their integration in ICD-11. Having functioning properties in the ICD-11 achieves a milestone in depicting health information in an integrated and comprehensive manner. Explicitly identifying functioning properties for specific health conditions further reinforces the importance of acquiring a broader and more meaningful picture of a person's health, and can guide clinical decision-making.

Progress in development of low density polymer foams for the ICF Program

International Nuclear Information System (INIS)

Letts, S.A.; Lucht, L.M.; Morgan, R.J.; Cook, R.C.; Tillotson, T.M.; Mercer, M.B.; Miller, D.E.

1985-01-01

This report describes the status of CH foam development with densities of 50 mg/ccs and cell sizes of 1 μm for the ICF Program. Two approaches that both involve polymer phase separation are being investigated. The first involves a gelation-crystallization of high molecular weight polyethylene from solution, whereas the second approach involves the modification of the phase separation morphology of water-styrene emulsions by molecularly-tailored surfactants followed by polymerization of the continuous styrene phase

ICF burn-history measurments using 17-MeV fusion gamma rays

International Nuclear Information System (INIS)

Lerche, R.A.; Cable, M.D.; Dendooven, P.G.

1995-01-01

Fusion reaction rate for inertial-confinement fusion (ICF) experiments at the Nova Laser Facility is measured with 30-ps resolution using a high-speed neutron detector. We are investigating a measurement technique based on the 16.7-MeV gamma rays that are released in deuterium-tritium fusion. Our concept is to convert gamma-ray energy into a fast burst of Cerenkov light that can be recorded with a high-speed optical detector. We have detected fusion gamma rays in preliminary experiments conducted at Nova where we used a tungsten/aerogel converter to generate Cerenkov light and an optical streak camera to record the signal

Identification of health problems in patients with acute inflammatory arthritis, using the International Classification of Functioning, Disability and Health (ICF).

Science.gov (United States)

Zochling, J; Grill, E; Scheuringer, M; Liman, W; Stucki, G; Braun, J

2006-01-01

To identify the most common health problems experienced by patients with acute inflammatory arthritis using the International Classification of Functioning, Disability and Health (ICF), and to provide empirical data for the development of an ICF Core Set for acute inflammatory arthritis. Cross-sectional survey of patients with acute inflammatory arthritis of two or more joints requiring admission to an acute hospital. The second level categories of the ICF were used to collect information on patients' health problems. Relative frequencies of impairments, limitations and restrictions in the study population were reported for the ICF components Body Functions, Body Structures, and Activities and Participations. For the component Environmental Factors absolute and relative frequencies of perceived barriers or facilitators were reported. In total, 130 patients were included in the survey. The mean age of the population was 59.9 years (median age 63.0 years), 75% of the patients were female. Most had rheumatoid arthritis (57%) or early inflammatory polyarthritis (22%). Fifty-four second-level ICF categories had a prevalence of 30% or more: 3 (8%) belonged to the component Body Structures and 10 (13%) to the component Body Functions. Most categories were identified in the components Activities and Participation (19; 23%) and Environmental Factors (22; 56%). Patients with acute inflammatory arthritis can be well described by ICF categories and components. This study is the first step towards the development of an ICF Core Set for patients with acute inflammatory arthritis.

Using the International Classification of Functioning, Disability and Health (ICF to describe children referred to special care or paediatric dental services.

Directory of Open Access Journals (Sweden)

Denise Faulks

Full Text Available Children in dentistry are traditionally described in terms of medical diagnosis and prevalence of oral disease. This approach gives little information regarding a child's capacity to maintain oral health or regarding the social determinants of oral health. The biopsychosocial approach, embodied in the International Classification of Functioning, Disability and Health - Child and Youth version (ICF-CY (WHO, provides a wider picture of a child's real-life experience, but practical tools for the application of this model are lacking. This article describes the preliminary empirical study necessary for development of such a tool - an ICF-CY Core Set for Oral Health. An ICF-CY questionnaire was used to identify the medical, functional, social and environmental context of 218 children and adolescents referred to special care or paediatric dental services in France, Sweden, Argentina and Ireland (mean age 8 years ± 3.6 yrs. International Classification of Disease (ICD-10 diagnoses included disorders of the nervous system (26.1%, Down syndrome (22.0%, mental retardation (17.0%, autistic disorders (16.1%, and dental anxiety alone (11.0%. The most frequently impaired items in the ICF Body functions domain were 'Intellectual functions', 'High-level cognitive functions', and 'Attention functions'. In the Activities and Participation domain, participation restriction was frequently reported for 25 items including 'Handling stress', 'Caring for body parts', 'Looking after one's health' and 'Speaking'. In the Environment domain, facilitating items included 'Support of friends', 'Attitude of friends' and 'Support of immediate family'. One item was reported as an environmental barrier - 'Societal attitudes'. The ICF-CY can be used to highlight common profiles of functioning, activities, participation and environment shared by children in relation to oral health, despite widely differing medical, social and geographical contexts. The results of this empirical

Operationalization and reliability testing of ICF categories relevant for physiotherapists' interventions in the acute hospital

OpenAIRE

Grill, E; Gloor-Juzi, T; Huber, E O; Stucki, G

2011-01-01

Objective: To operationalize items based on categories of the International Classification of Functioning, Disability and Health (ICF) relevant to patient problems that are addressed by physiotherapeutic interventions in the acute hospital, and to test the reliability of these items when applied by physiotherapists. Methods: A selection of 124 ICF categories was operationalized in a formal decision-making and consensus process. The reliability of the newly operationalized item list ...

High-resolution Imaging of Deuterium-Tritium Capsule Implosions on the National Ignition Facility

Science.gov (United States)

Bachmann, Benjamin; Rygg, Ryan; Collins, Gilbert; Patel, Pravesh

2017-10-01

Highly-resolved 3-D simulations of inertial confinement fusion (ICF) implosions predict a hot spot plasma that exhibits complex micron-scale structure originating from a variety of 3-D perturbations. Experimental diagnosis of these conditions requires high spatial resolution imaging techniques. X-ray penumbral imaging can improve the spatial resolution over pinhole imaging while simultaneously increasing the detected photon yield at x-ray energies where the ablator opacity becomes negligible. Here we report on the first time-integrated x-ray penumbral imaging experiments of ICF capsule implosions at the National Ignition Facility that achieved spatial resolution as high as 4 micrometer. 6 to 30 keV hot spot images from layered DT implosions will be presented from a variety of experimental ICF campaigns, revealing previously unseen detail. It will be discussed how these and future results can be used to improve our physics understanding of inertially confined fusion plasmas by enabling spatially resolved measurements of hot spot properties, such as radiation energy, temperature or derived quantities. This work performed under the auspices of the U.S. Department of Energy by LLNL under Contract DE-AC52-07NA27344.

The physics of radiation driven ICF hohlraums

International Nuclear Information System (INIS)

Rosen, M.D.

1995-01-01

On the Nova Laser at LLNL, we have recently demonstrated many of the key elements required for assuring that the next proposed laser, the National Ignition Facility (NIF) will drive an Inertial Confinement Fusion (ICF) target to ignition. The target uses the recently declassified indirect drive (sometimes referred to as open-quotes radiation driveclose quotes) approach which converts laser light to x-rays inside a gold cylinder, which then acts as an x-ray open-quotes ovenclose quotes (called a hohlraum) to drive the fusion capsule in its center. On Nova we've demonstrated good understanding of the temperatures reached in hohlraums and of the ways to control the uniformity with which the x-rays drive the spherical fusion capsules. In this lecture we briefly review the fundamentals of ICF, and describe the capsule implosion symmetry advantages of the hohlraum approach. We then concentrate on a quantitative understanding of the scaling of radiation drive with hohlraum size and wall material, and with laser pulse length and power. We demonstrate that coupling efficiency of x-ray drive to the capsule increases as we proceed from Nova to the NIF and eventually to a reactor, thus increasing the gain of the system

[Assessment of functioning in patients with head and neck cancer based on the international classification of functioning, disability and health (ICF)].

Science.gov (United States)

Tschiesner, U

2011-09-01

The article approaches with the question how preservation of function after treatment of head and neck cancer (HNC) can be defined and measured across treatment approaches. On the basis of the "International Classification of Functioning, Disability and Health (ICF)" a series of efforts are summarized how all relevant aspects of the interdisciplinary team can be integrated into a common concept.Different efforts on the development, validation and implementation of ICF Core Sets for head and neck cancer (ICF-HNC) are discussed. The ICF-HNC covers organ-based problems with food ingestion, breathing, and speech, as well as psychosocial difficulties.Relationships between the ICF-HNC and well-established outcome measures are illustrated. This enables the user to integrate different aspects of functional outcome into a consolidated approach towards preservation/rehabilitation of functioning after HNC - applicable for a variety of treatment-approaches and health-professions. George Thieme Verlag KG Stuttgart · New York.

High performance capsule implosions driven by the Z-pinch dynamic hohlraum

Energy Technology Data Exchange (ETDEWEB)

Rochau, G A [Sandia National Laboratories, PO Box 5800 MS 1196, Albuquerque, NM 87185 (United States); Bailey, J E [Sandia National Laboratories, PO Box 5800 MS 1196, Albuquerque, NM 87185 (United States); Chandler, G A [Sandia National Laboratories, PO Box 5800 MS 1196, Albuquerque, NM 87185 (United States); Cooper, G [Sandia National Laboratories, PO Box 5800 MS 1196, Albuquerque, NM 87185 (United States); Dunham, G S [K-tech Corporation, 10800 Gibson S E, Albuquerque, NM 87123 (United States); Lake, P W [Sandia National Laboratories, PO Box 5800 MS 1196, Albuquerque, NM 87185 (United States); Leeper, R J [Sandia National Laboratories, PO Box 5800 MS 1196, Albuquerque, NM 87185 (United States); Lemke, R W [Sandia National Laboratories, PO Box 5800 MS 1196, Albuquerque, NM 87185 (United States); Mehlhorn, T A [Sandia National Laboratories, PO Box 5800 MS 1196, Albuquerque, NM 87185 (United States); Nikroo, A [General Atomics, PO Box 85608, San Diego, CA 92186 (United States); Peterson, K J [Sandia National Laboratories, PO Box 5800 MS 1196, Albuquerque, NM 87185 (United States); Ruiz, C L [Sandia National Laboratories, PO Box 5800 MS 1196, Albuquerque, NM 87185 (United States); Schroen, D G [General Atomics, PO Box 85608, San Diego, CA 92186 (United States); Slutz, S A [Sandia National Laboratories, PO Box 5800 MS 1196, Albuquerque, NM 87185 (United States); Steinman, D [General Atomics, PO Box 85608, San Diego, CA 92186 (United States); Stygar, W A [Sandia National Laboratories, PO Box 5800 MS 1196, Albuquerque, NM 87185 (United States); Varnum, W [Sandia National Laboratories, PO Box 5800 MS 1196, Albuquerque, NM 87185 (United States)

2007-12-15

The Z-pinch dynamic hohlraum (ZPDH) is a high-power x-ray source that has been used in a variety of high energy-density experiments including inertial confinement fusion (ICF) studies. The system consists of a tungsten wire-array Z pinch that implodes onto a low-density CH{sub 2} foam converter launching a radiating shock that heats the hohlraum to radiation temperatures >200 eV. Through time-gated pinhole camera measurements, the mean shock speed is measured from 28 experiments to be 326 {+-} 4 {mu}m ns{sup -1} with a shot-to-shot standard deviation of 7%. Broad-band x-ray measurements indicate that the shot-to-shot reproducibility in the power emission and pulse-shape of the source shock is <15% and {approx}5%, respectively. Calculations have shown that an ICF capsule placed at the center of the foam in the ZPDH can absorb >40 kJ of x-ray energy, within a factor of 4 of the energy believed sufficient for ICF ignition. The capsule types imploded by the ZPDH have evolved over four years culminating in a design that produces record indirect-drive DD thermonuclear neutron yields of up to 3.5E11.

Towards an ICF core set for ADHD: a worldwide expert survey on ability and disability

OpenAIRE

de Schipper, Elles; Mahdi, Soheil; Coghill, David; de Vries, Petrus J.; Gau, Susan Shur-Fen; Granlund, Mats; Holtmann, Martin; Karande, Sunil; Levy, Florence; Almodayfer, Omar; Rohde, Luis; Tannock, Rosemary; B?lte, Sven

2015-01-01

This is the second in a series of four empirical studies designed to develop International Classification of Functioning, Disability and Health (ICF and Children and Youth version, ICF-CY) core sets for attention deficit hyperactivity disorder (ADHD). The objective of this stage was to gather the opinions from international experts on which ability and disability concepts were considered relevant to functioning in ADHD. An email-based survey was carried out amongst international experts in AD...

Identification of relevant ICF categories by patients with neurological conditions in early post-acute rehabilitation facilities.

Science.gov (United States)

Grill, Eva; Lipp, Berthold; Boldt, Christine; Stucki, Gerold; Koenig, Eberhard

To describe functioning and health of patients with neurological conditions in early post-acute rehabilitation facilities and to identify the most common problems using the International Classification of Functioning, Disability and Health (ICF). Cross-sectional survey in a convenience sample of patients with neurological conditions requiring rehabilitation in early post-acute facilities. The second-level categories of the ICF were used to collect information on patients' problems. For the ICF components Body Functions, Body Structures and Activities and Participation absolute and relative frequencies of impairments/limitations in the study population were reported. For the component Environmental Factors absolute and relative frequencies of perceived barriers or facilitators were reported. The mean age in the sample was 56.6 years with a median age of 60 years. Forty percent of the patients were female. In 292 neurological patients 125 categories (51%) had a prevalence of 30% and above: 39 categories (49%) of Body Functions, 11 categories (28%) of Body Structures, 64 categories (88%) of Activities and Participation and 10 (20%) categories of Environmental Factors. This study is a first step towards the development of ICF Core Sets for of patients with neurological conditions in early post-acute rehabilitation facilities.

High yield fabrication of fluorescent nanodiamonds

International Nuclear Information System (INIS)

Boudou, Jean-Paul; Curmi, Patrick A; Jelezko, Fedor; Wrachtrup, Joerg; Balasubramanian, Gopalakrischnan; Reuter, Rolf; Aubert, Pascal; Sennour, Mohamed; Thorel, Alain; Gaffet, Eric

2009-01-01

A new fabrication method to produce homogeneously fluorescent nanodiamonds with high yields is described. The powder obtained by high energy ball milling of fluorescent high pressure, high temperature diamond microcrystals was converted in a pure concentrated aqueous colloidal dispersion of highly crystalline ultrasmall nanoparticles with a mean size less than or equal to 10 nm. The whole fabrication yield of colloidal quasi-spherical nanodiamonds was several orders of magnitude higher than those previously reported starting from microdiamonds. The results open up avenues for the industrial cost-effective production of fluorescent nanodiamonds with well-controlled properties.

High yield fabrication of fluorescent nanodiamonds

Energy Technology Data Exchange (ETDEWEB)

Boudou, Jean-Paul; Curmi, Patrick A [Structure and Activity of Normal and Pathological Biomolecules-INSERM/UEVE U829, Universite d' Evry-Val d' Essonne, Batiment Maupertuis, Rue du pere Andre Jarlan, F-91025 Evry (France); Jelezko, Fedor; Wrachtrup, Joerg; Balasubramanian, Gopalakrischnan; Reuter, Rolf [3.Physikalisches Institut, University of Stuttgart, Pfaffenwaldring 57, D-70550 Stuttgart (Germany); Aubert, Pascal [Nanometric Media Laboratory, Universite d' Evry-Val d' Essonne, Batiment Maupertuis, Rue du pere Andre Jarlan, F-91025 Evry (France); Sennour, Mohamed; Thorel, Alain [Centre des Materiaux, Mines Paris, ParisTech, BP 87, F-91000 Evry (France); Gaffet, Eric [Nanomaterials Research Group-UMR 5060, CNRS, UTBM, Site de Sevenans, F-90010 Belfort (France)], E-mail: jpb.cnrs@free.fr, E-mail: pcurmi@univ-evry.fr, E-mail: f.jelezko@physik.uni-stuttgart.de

2009-06-10

A new fabrication method to produce homogeneously fluorescent nanodiamonds with high yields is described. The powder obtained by high energy ball milling of fluorescent high pressure, high temperature diamond microcrystals was converted in a pure concentrated aqueous colloidal dispersion of highly crystalline ultrasmall nanoparticles with a mean size less than or equal to 10 nm. The whole fabrication yield of colloidal quasi-spherical nanodiamonds was several orders of magnitude higher than those previously reported starting from microdiamonds. The results open up avenues for the industrial cost-effective production of fluorescent nanodiamonds with well-controlled properties.

Constitutive phosphorylation of ATM in lymphoblastoid cell lines from patients with ICF syndrome without downstream kinase activity.

Science.gov (United States)

Goldstine, Jimena V; Nahas, Shareef; Gamo, Kristin; Gartler, Stanley M; Hansen, R Scott; Roelfsema, Jeroen H; Gatti, Richard A; Marahrens, York

2006-04-08

Double strand DNA breaks in the genome lead to the activation of the ataxia-telangiectasia mutated (ATM) kinase in a process that requires ATM autophosphorylation at serine-1981. ATM autophosphorylation only occurs if ATM is previously acetylated by Tip60. The activated ATM kinase phosphorylates proteins involved in arresting the cell cycle, including p53, and in repairing the DNA breaks. Chloroquine treatment and other manipulations that produce chromatin defects in the absence of detectable double strand breaks also trigger ATM phosphorylation and the phosphorylation of p53 in primary human fibroblasts, while other downstream substrates of ATM that are involved in the repair of DNA double strand breaks remain unphosphorylated. This raises the issue of whether ATM is constitutively activated in patients with genetic diseases that display chromatin defects. We examined lymphoblastoid cell lines (LCLs) generated from patients with different types of chromatin disorders: Immunodeficiency, Centromeric instability, Facial anomalies (ICF) syndrome, Coffin Lowry syndrome, Rubinstein Taybi syndrome and Fascioscapulohumeral Muscular Dystrophy. We show that ATM is phosphorylated on serine-1981 in LCLs derived from ICF patients but not from the other syndromes. The phosphorylated ATM in ICF cells did not phosphorylate the downstream targets NBS1, SMC1 and H2AX, all of which require the presence of double strand breaks. We demonstrate that ICF cells respond normally to ionizing radiation, ruling out the possibility that genetic deficiency in ICF cells renders activated ATM incapable of phosphorylating its downstream substrates. Surprisingly, p53 was also not phosphorylated in ICF cells or in chloroquine-treated wild type LCLs. In this regard the response to chromatin-altering agents differs between primary fibroblasts and LCLs. Our findings indicate that although phosphorylation at serine-1981 is essential in the activation of the ATM kinase, serine-1981 phosphorylation is

Use of The International Classification of Functioning, Disability and Health (ICF as a conceptual framework and common language for disability statistics and health information systems

Directory of Open Access Journals (Sweden)

Kostanjsek Nenad

2011-05-01

Full Text Available Abstract A common framework for describing functional status information is needed in order to make this information comparable and of value. The World Health Organization’s International Classification of Functioning, Disability and Health (ICF, which has been approved by all its member states, provides this common language and framework. The article provides an overview of ICF taxonomy, introduces the conceptual model which underpins ICF and elaborates on how ICF is used at population and clinical level. Furthermore, the article presents key features of the ICF tooling environment and outlines current and future developments of the classification.

Block Ignition Inertial Confinement Fusion (ICF) with Condensed Matter Cluster Type Targets for p-B11 Powered Space Propulsion

International Nuclear Information System (INIS)

Miley, George H.; Hora, H.; Badziak, J.; Wolowski, J.; Sheng Zhengming; Zhang Jie; Osman, F.; Zhang Weiyan; Tuhe Xia

2009-01-01

The use of laser-driven Inertial Confinement Fusion (ICF) for space propulsion has been the subject of several earlier conceptual design studies, (see: Orth, 1998; and other references therein). However, these studies were based on older ICF technology using either 'direct' or 'in-direct x-ray driven' type target irradiation. Important new directions have opened for laser ICF in recent years following the development of 'chirped' lasers capable of ultra short pulses with powers of TW up to few PW which leads to the concept of 'fast ignition (FI)' to achieve higher energy gains from target implosions. In a recent publication the authors showed that use of a modified type of FI, termed 'block ignition' (Miley et al., 2008), could meet many of the requirements anticipated (but not then available) by the designs of the Vehicle for Interplanetary Space Transport Applications (VISTA) ICF fusion propulsion ship (Orth, 2008) for deep space missions. Subsequently the first author devised and presented concepts for imbedding high density condensed matter 'clusters' of deuterium into the target to obtain ultra high local fusion reaction rates (Miley, 2008). Such rates are possible due to the high density of the clusters (over an order of magnitude above cryogenic deuterium). Once compressed by the implosion, the yet higher density gives an ultra high reaction rate over the cluster volume since the fusion rate is proportional to the square of the fuel density. Most recently, a new discovery discussed here indicates that the target matrix could be composed of B 11 with proton clusters imbedded. This then makes p-B 11 fusion practical, assuming all of the physics issues such as stability of the clusters during compression are resolved. Indeed, p-B 11 power is ideal for fusion propulsion since it has a minimum of unwanted side products while giving most of the reaction energy to energetic alpha particles which can be directed into an exhaust (propulsion) nozzle. Power plants

Block Ignition Inertial Confinement Fusion (ICF) with Condensed Matter Cluster Type Targets for p-B11 Powered Space Propulsion

Science.gov (United States)

Miley, George H.; Hora, H.; Badziak, J.; Wolowski, J.; Sheng, Zheng-Ming; Zhang, Jie; Osman, F.; Zhang, Weiyan; tu He, Xia

2009-03-01

The use of laser-driven Inertial Confinement Fusion (ICF) for space propulsion has been the subject of several earlier conceptual design studies, (see: Orth, 1998; and other references therein). However, these studies were based on older ICF technology using either "direct "or "in-direct x-ray driven" type target irradiation. Important new directions have opened for laser ICF in recent years following the development of "chirped" lasers capable of ultra short pulses with powers of TW up to few PW which leads to the concept of "fast ignition (FI)" to achieve higher energy gains from target implosions. In a recent publication the authors showed that use of a modified type of FI, termed "block ignition" (Miley et al., 2008), could meet many of the requirements anticipated (but not then available) by the designs of the Vehicle for Interplanetary Space Transport Applications (VISTA) ICF fusion propulsion ship (Orth, 2008) for deep space missions. Subsequently the first author devised and presented concepts for imbedding high density condensed matter "clusters" of deuterium into the target to obtain ultra high local fusion reaction rates (Miley, 2008). Such rates are possible due to the high density of the clusters (over an order of magnitude above cryogenic deuterium). Once compressed by the implosion, the yet higher density gives an ultra high reaction rate over the cluster volume since the fusion rate is proportional to the square of the fuel density. Most recently, a new discovery discussed here indicates that the target matrix could be composed of B11 with proton clusters imbedded. This then makes p-B11 fusion practical, assuming all of the physics issues such as stability of the clusters during compression are resolved. Indeed, p-B11 power is ideal for fusion propulsion since it has a minimum of unwanted side products while giving most of the reaction energy to energetic alpha particles which can be directed into an exhaust (propulsion) nozzle. Power plants using p

Statistical Relations for Yield Degradation in Inertial Confinement Fusion

Science.gov (United States)

Woo, K. M.; Betti, R.; Patel, D.; Gopalaswamy, V.

2017-10-01

In inertial confinement fusion (ICF), the yield-over-clean (YOC) is a quantity commonly used to assess the performance of an implosion with respect to the degradation caused by asymmetries. The YOC also determines the Lawson parameter used to identify the onset of ignition and the level of alpha heating in ICF implosions. In this work, we show that the YOC is a unique function of the residual kinetic energy in the compressed shell (with respect to the 1-D case) regardless of the asymmetry spectrum. This result is derived using a simple model of the deceleration phase as well as through an extensive set of 3-D radiation-hydrodynamics simulations using the code DEC3D. The latter has been recently upgraded to include a 3-D spherical moving mesh, the HYPRE solver for 3-D radiation transport and piecewise-parabolic method for robust shock-capturing hydrodynamic simulations. DEC3D is used to build a synthetic single-mode database to study the behavior of yield degradation caused by Rayleigh-Taylor instabilities in the deceleration phase. The relation between YOC and residual kinetic energy is compared with the result in an adiabatic implosion model. The statistical expression of YOC is also applied to the ignition criterion in the presence of multidimensional nonuniformities. This material is based upon work supported by the Department of Energy National Nuclear Security Administration under Award Number DE-NA0001944.

AUTOMATED BATCH CHARACTERIZATION OF ICF SHELLS WITH VISION-ENABLED OPTICAL MICROSCOPE SYSTEM

International Nuclear Information System (INIS)

HUANG, H.; STEPHENS, R.B.; HILL, D.W.; LYON, C.; NIKROO, A.; STEINMAN, D.A.

2003-09-01

OAK-B135 Inertial Confinement Fusion (ICF) shells are mesoscale objects with nano-scale dimensional and nano-surface finish requirements. Currently, the shell dimensions are measured by white-light interferometry and an image analysis method. These two methods complement each other and give a rather complete data set on a single shell. The process is, however, labor intensive. They have developed an automation routine to fully characterize a shell in one shot and perform unattended batch measurements. The method is useful to the ICF program both for production screening and for full characterization. It also has potential for Inertial Fusion Energy (IFE) power plant where half a million shells need to be processed daily

Compiling standardized information from clinical practice: using content analysis and ICF Linking Rules in a goal-oriented youth rehabilitation program.

Science.gov (United States)

Lustenberger, Nadia A; Prodinger, Birgit; Dorjbal, Delgerjargal; Rubinelli, Sara; Schmitt, Klaus; Scheel-Sailer, Anke

2017-09-23

To illustrate how routinely written narrative admission and discharge reports of a rehabilitation program for eight youths with chronic neurological health conditions can be transformed to the International Classification of Functioning, Disability and Health. First, a qualitative content analysis was conducted by building meaningful units with text segments assigned of the reports to the five elements of the Rehab-Cycle ® : goal; assessment; assignment; intervention; evaluation. Second, the meaningful units were then linked to the ICF using the refined ICF Linking Rules. With the first step of transformation, the emphasis of the narrative reports changed to a process oriented interdisciplinary layout, revealing three thematic blocks of goals: mobility, self-care, mental, and social functions. The linked 95 unique ICF codes could be grouped in clinically meaningful goal-centered ICF codes. Between the two independent linkers, the agreement rate was improved after complementing the rules with additional agreements. The ICF Linking Rules can be used to compile standardized health information from narrative reports if prior structured. The process requires time and expertise. To implement the ICF into common practice, the findings provide the starting point for reporting rehabilitation that builds upon existing practice and adheres to international standards. Implications for Rehabilitation This study provides evidence that routinely collected health information from rehabilitation practice can be transformed to the International Classification of Functioning, Disability and Health by using the "ICF Linking Rules", however, this requires time and expertise. The Rehab-Cycle ® , including assessments, assignments, goal setting, interventions and goal evaluation, serves as feasible framework for structuring this rehabilitation program and ensures that the complexity of local practice is appropriately reflected. The refined "ICF Linking Rules" lead to a standardized

Use of International Classification of Functioning, Disability and Health (ICF) to describe patient-reported disability in multiple sclerosis and identification of relevant environmental factors.

Science.gov (United States)

Khan, Fary; Pallant, Julie F

2007-01-01

To use the International Classification of Functioning, Disability and Health (ICF) to describe patient-reported disability in multiple sclerosis and identify relevant environmental factors. Cross-sectional survey of 101 participants in the community. Their multiple sclerosis-related problems were linked with ICF categories (second level) using a checklist, consensus between health professionals and the "linking rules". The impact of multiple sclerosis on health areas corresponding to 48 ICF categories was also assessed. A total of 170 ICF categories were identified (mean age 49 years, 72 were female). Average number of problems reported was 18. The categories include 48 (42%) for body function, 16 (34%) body structure, 68 (58%) activities and participation and 38 (51%) for environmental factors. Extreme impact in health areas corresponding to ICF categories for activities and participation were reported for mobility, work, everyday home activities, community and social activities. While those for the environmental factors (barriers) included products for mobility, attitudes of extended family, restriction accessing social security and health resources. This study is a first step in the use of the ICF in persons with multiple sclerosis and towards development of the ICF Core set for multiple sclerosis from a broader international perspective.

A high throughput DNA extraction method with high yield and quality

Directory of Open Access Journals (Sweden)

Xin Zhanguo

2012-07-01

Full Text Available Abstract Background Preparation of large quantity and high quality genomic DNA from a large number of plant samples is a major bottleneck for most genetic and genomic analyses, such as, genetic mapping, TILLING (Targeting Induced Local Lesion IN Genome, and next-generation sequencing directly from sheared genomic DNA. A variety of DNA preparation methods and commercial kits are available. However, they are either low throughput, low yield, or costly. Here, we describe a method for high throughput genomic DNA isolation from sorghum [Sorghum bicolor (L. Moench] leaves and dry seeds with high yield, high quality, and affordable cost. Results We developed a high throughput DNA isolation method by combining a high yield CTAB extraction method with an improved cleanup procedure based on MagAttract kit. The method yielded large quantity and high quality DNA from both lyophilized sorghum leaves and dry seeds. The DNA yield was improved by nearly 30 fold with 4 times less consumption of MagAttract beads. The method can also be used in other plant species, including cotton leaves and pine needles. Conclusion A high throughput system for DNA extraction from sorghum leaves and seeds was developed and validated. The main advantages of the method are low cost, high yield, high quality, and high throughput. One person can process two 96-well plates in a working day at a cost of $0.10 per sample of magnetic beads plus other consumables that other methods will also need.

Feasibility of the Dutch ICF Activity Inventory: a pilot study

NARCIS (Netherlands)

Bruijning, J.E.; van Nispen, R.M.A.; van Rens, G.H.M.B.

2010-01-01

Background. Demographic ageing will lead to increasing pressure on visual rehabilitation services, which need to be efficiently organised in the near future. The Dutch ICF Activity Inventory (D-AI) was developed to assess the rehabilitation needs of visually impaired persons. This pilot study tests

Development of pulsed high current drivers for fast Z-pinch

International Nuclear Information System (INIS)

Sun Fengju; Qiu Aici; Zeng Zhengzhong; Zeng Jiangtao; Kuai Bin; Yang Hailiang

2006-01-01

It is required that the peak current of high power pulsed drive for fast Z-pinch reaches 60 MA to realize inertial confine fusion (ICF) and high yield (HY). With the conventional technological methods similar to the Z or Saturn apparatus, increasing driver current further is impractical and difficult according to the cost, structure complexity and reliability of the driver, so it is necessary to develop novel fast pulsed high current driver. The present art-of-state and trends of fast Z-pinch driver are summarized, and the typical conceptual designs and technological methods on ICF/HY PRS (plasma radiation source) and destroying-level super X-ray simulators in USA and Russia are outlined, such as HCEI's UGXX1 driver and new Saturn driver based on fast linear transformer driver (FLTD) and novel driver based on fast Marx generator (FMG) with current of 15 MA. The crucial technological problems and requirements to investigate in the future are presented. (authors)

Kinetic studies of ICF target dynamics with ePLAS

Science.gov (United States)

Mason, R. J.

2016-10-01

The ePLAS code was recently used1 to show that a modeling change from artificial to real viscosity can result in a decrease of the predicted performance of ICF targets. This code typically follows either fluid or PIC electrons with fluid ions in self-consistent E - and B - fields computed by the Implicit Moment Method2. For the present study the ions have instead been run as PIC particles undergoing Krook-like self-collisions. The ePLAS collision model continually redistributes the ion particle properties toward a local Maxwellian, while conserving the mean density, momentum and energy. Whereas the use of real viscosity captures large Knudsen Number effects as the active target dimensions shrink below the ion mean-free-path, the new kinetic modeling can manifest additional effects such as collisional shock precursors3 from the escape and streaming of the fastest particle ions. In 2D cylindrical geometry we will explore how such kinetic shock extensions might affect shell and core compression dynamics in ICF target implosions.

Monte Carlo Methods in ICF

Science.gov (United States)

Zimmerman, George B.

Monte Carlo methods appropriate to simulate the transport of x-rays, neutrons, ions and electrons in Inertial Confinement Fusion targets are described and analyzed. The Implicit Monte Carlo method of x-ray transport handles symmetry within indirect drive ICF hohlraums well, but can be improved 50X in efficiency by angular biasing the x-rays towards the fuel capsule. Accurate simulation of thermonuclear burn and burn diagnostics involves detailed particle source spectra, charged particle ranges, inflight reaction kinematics, corrections for bulk and thermal Doppler effects and variance reduction to obtain adequate statistics for rare events. It is found that the effects of angular Coulomb scattering must be included in models of charged particle transport through heterogeneous materials.

Monte Carlo methods in ICF

International Nuclear Information System (INIS)

Zimmerman, George B.

1997-01-01

Monte Carlo methods appropriate to simulate the transport of x-rays, neutrons, ions and electrons in Inertial Confinement Fusion targets are described and analyzed. The Implicit Monte Carlo method of x-ray transport handles symmetry within indirect drive ICF hohlraums well, but can be improved 50X in efficiency by angular biasing the x-rays towards the fuel capsule. Accurate simulation of thermonuclear burn and burn diagnostics involves detailed particle source spectra, charged particle ranges, inflight reaction kinematics, corrections for bulk and thermal Doppler effects and variance reduction to obtain adequate statistics for rare events. It is found that the effects of angular Coulomb scattering must be included in models of charged particle transport through heterogeneous materials

Application of the International Classification of Functioning, Disability and Health (ICF) to people with dysphagia following non-surgical head and neck cancer management.

Science.gov (United States)

Nund, Rebecca L; Scarinci, Nerina A; Cartmill, Bena; Ward, Elizabeth C; Kuipers, Pim; Porceddu, Sandro V

2014-12-01

The International Classification of Functioning, Disability, and Health (ICF) is an internationally recognized framework which allows its user to describe the consequences of a health condition on an individual in the context of their environment. With growing recognition that dysphagia can have broad ranging physical and psychosocial impacts, the aim of this paper was to identify the ICF domains and categories that describe the full functional impact of dysphagia following non-surgical head and neck cancer (HNC) management, from the perspective of the person with dysphagia. A secondary analysis was conducted on previously published qualitative study data which explored the lived experiences of dysphagia of 24 individuals with self-reported swallowing difficulties following HNC management. Categories and sub-categories identified by the qualitative analysis were subsequently mapped to the ICF using the established linking rules to develop a set of ICF codes relevant to the impact of dysphagia following HNC management. The 69 categories and sub-categories that had emerged from the qualitative analysis were successfully linked to 52 ICF codes. The distribution of these codes across the ICF framework revealed that the components of Body Functions, Activities and Participation, and Environmental Factors were almost equally represented. The findings confirm that the ICF is a valuable framework for representing the complexity and multifaceted impact of dysphagia following HNC. This list of ICF codes, which reflect the diverse impact of dysphagia associated with HNC on the individual, can be used to guide more holistic assessment and management for this population.

Towards an outcome documentation in manual medicine: a first proposal of the International Classification of Functioning, Disability and Health (ICF) intervention categories for manual medicine based on a Delphi survey.

Science.gov (United States)

Kirchberger, I; Stucki, G; Böhni, U; Cieza, A; Kirschneck, M; Dvorak, J

2009-09-01

The International Classification of Functioning, Disability and Health (ICF) provides a useful framework for the comprehensive description of the patients' functional health. The aim of this study was to identify the ICF categories that represent the patients' problems treated by manual medicine practitioners in order to facilitate its application in manual medicine. This selection of ICF categories could be used for assessment, treatment documentation and quality management in manual medicine practice. Swiss manual medicine experts were asked about the patients' problems commonly treated by manual medicine practitioners in a three-round survey using the Delphi technique. Responses were linked to the ICF. Forty-eight manual medicine experts gave a total of 808 responses that were linked to 225 different ICF categories; 106 ICF categories which reached an agreement of at least 50% among the participants in the final Delphi-round were included in the set of ICF Intervention Categories for Manual Medicine; 42 (40%) of the categories are assigned to the ICF component body functions, 36 (34%) represent the ICF component body structures and 28 (26%) the ICF component activities and participation. A first proposal of ICF Intervention Categories for Manual Medicine was defined and needs to be validated in further studies.

Stability design considerations for mirror support systems in ICF lasers

International Nuclear Information System (INIS)

Tietbohl, G.L.; Sommer, S.C.

1996-10-01

Some of the major components of laser systems used for Inertial Confinement Fusion (ICF) are the large aperture mirrors which direct the path of the laser. These mirrors are typically supported by systems which consist of mirror mounts, mirror enclosures, superstructures, and foundations. Stability design considerations for the support systems of large aperture mirrors have been developed based on the experience of designing and evaluating similar systems at the Lawrence Livermore National Laboratory (LLNL). Examples of the systems developed at LLNL include Nova, the Petawatt laser, Beamlet, and the National Ignition Facility (NIF). The structural design of support systems of large aperture mirrors has typically been controlled by stability considerations in order for the large laser system to meet its performance requirements for alignment and positioning. This paper will discuss the influence of stability considerations and will provide guidance on the structural design and evaluation of mirror support systems in ICF lasers so that this information can be used on similar systems

Laser performance upgrade for precise ICF experiment in SG-Ⅲ laser facility

Directory of Open Access Journals (Sweden)

Wanguo Zheng

2017-09-01

Full Text Available The SG-Ⅲ laser facility (SG-Ⅲ is the largest laser driver for inertial confinement fusion (ICF researches in China, which has 48 beamlines and can deliver 180 kJ ultraviolet laser energy in 3 ns. In order to meet the requirements of precise physics experiments, some new functionalities need to be added to SG-Ⅲ and some intrinsic laser performances need upgrade. So at the end of SG-Ⅲ's engineering construction, the 2-year laser performance upgrade project started. This paper will introduce the newly added functionalities and the latest laser performance of SG-Ⅲ. With these function extensions and performance upgrade, SG-Ⅲ is now fully prepared for precise ICF experiments and solidly paves the way towards fusion ignition.

Toward the International Classification of Functioning, Disability and Health (ICF) Rehabilitation Set: A Minimal Generic Set of Domains for Rehabilitation as a Health Strategy.

Science.gov (United States)

Prodinger, Birgit; Cieza, Alarcos; Oberhauser, Cornelia; Bickenbach, Jerome; Üstün, Tevfik Bedirhan; Chatterji, Somnath; Stucki, Gerold

2016-06-01

To develop a comprehensive set of the International Classification of Functioning, Disability and Health (ICF) categories as a minimal standard for reporting and assessing functioning and disability in clinical populations along the continuum of care. The specific aims were to specify the domains of functioning recommended for an ICF Rehabilitation Set and to identify a minimal set of environmental factors (EFs) to be used alongside the ICF Rehabilitation Set when describing disability across individuals and populations with various health conditions. Secondary analysis of existing data sets using regression methods (Random Forests and Group Lasso regression) and expert consultations. Along the continuum of care, including acute, early postacute, and long-term and community rehabilitation settings. Persons (N=9863) with various health conditions participated in primary studies. The number of respondents for whom the dependent variable data were available and used in this analysis was 9264. Not applicable. For regression analyses, self-reported general health was used as a dependent variable. The ICF categories from the functioning component and the EF component were used as independent variables for the development of the ICF Rehabilitation Set and the minimal set of EFs, respectively. Thirty ICF categories to be complemented with 12 EFs were identified as relevant to the identified ICF sets. The ICF Rehabilitation Set constitutes of 9 ICF categories from the component body functions and 21 from the component activities and participation. The minimal set of EFs contains 12 categories spanning all chapters of the EF component of the ICF. The identified sets proposed serve as minimal generic sets of aspects of functioning in clinical populations for reporting data within and across heath conditions, time, clinical settings including rehabilitation, and countries. These sets present a reference framework for harmonizing existing information on disability across

Clinical spectrum of immunodeficiency, centromeric instability and facial dysmorphism (ICF syndrome).

NARCIS (Netherlands)

Hagleitner, M.M.; Lankester, A.; Maraschio, P.; Hulten, M.; Fryns, J.P.; Schuetz, C.; Gimelli, G.; Davies, E.G.; Gennery, A.R.; Belohradsky, B.H.; Groot, R. de; Gerritsen, E.J.; Mattina, T.; Howard, P.J.; Fasth, A.; Reisli, I.; Furthner, D.; Slatter, M.A.; Cant, A.J.; Cazzola, G.; Dijken, P.J. van; Deuren, M. van; Greef, J.C. de; Maarel, S.M. van der; Weemaes, C.M.R.

2008-01-01

BACKGROUND: Immunodeficiency, centromeric instability and facial dysmorphism (ICF syndrome) is a rare autosomal recessive disease characterised by facial dysmorphism, immunoglobulin deficiency and branching of chromosomes 1, 9 and 16 after PHA stimulation of lymphocytes. Hypomethylation of DNA of a

Recent laser experiments on the Aurora KrF/ICF laser system

International Nuclear Information System (INIS)

Turner, T.P.; Jones, J.E.; Czuchlewski, S.J.; Watt, R.G.; Thomas, S.J.; Kang, M.; Tallman, C.R.; Mack, J.M.; Figueira, J.F.

1990-01-01

The Aurora KrF/ICF Laser Facility at Los Alamos is operational at the kilojoule-level for both laser and target experiments. We report on recent laser experiments on the system and resulting system improvements. 3 refs., 4 figs

ND:GLASS LASER DESIGN FOR LASER ICF FISSION ENERGY (LIFE)

International Nuclear Information System (INIS)

Caird, J.A.; Agrawal, V.; Bayramian, A.; Beach, R.; Britten, J.; Chen, D.; Cross, R.; Ebbers, C.; Erlandson, A.; Feit, M.; Freitas, B.; Ghosh, C.; Haefner, C.; Homoelle, D.; Ladran, T.; Latkowski, J.; Molander, W.; Murray, J.; Rubenchik, S.; Schaffers, K.; Siders, C.W.; Stappaerts, E.; Sutton, S.; Telford, S.; Trenholme, J.; Barty, C.J.

2008-01-01

We have developed preliminary conceptual laser system designs for the Laser ICF (Inertial Confinement Fusion) Fission Energy (LIFE) application. Our approach leverages experience in high-energy Nd:glass laser technology developed for the National Ignition Facility (NIF), along with high-energy-class diode-pumped solid-state laser (HEC-DPSSL) technology developed for the DOE's High Average Power Laser (HAPL) Program and embodied in LLNL's Mercury laser system. We present laser system designs suitable for both indirect-drive, hot spot ignition and indirect-drive, fast ignition targets. Main amplifiers for both systems use laser-diode-pumped Nd:glass slabs oriented at Brewster's angle, as in NIF, but the slabs are much thinner to allow for cooling by high-velocity helium gas as in the Mercury laser system. We also describe a plan to mass-produce pump-diode lasers to bring diode costs down to the order of $0.01 per Watt of peak output power, as needed to make the LIFE application economically attractive

25-ps neutron detector for measuring ICF-target burn history

International Nuclear Information System (INIS)

Lerche, R.A.; Phillion, D.W.; Tietbohl, G.L.

1994-01-01

We have developed a fast, sensitive neutron detector for recording the fusion reaction-rate history of inertial-confinement fusion (ICF) experiments. The detector is based on the fast rise-time of a commercial plastic scintillator (BC-422) and has a response 8 and 2 x 10 13 neutrons

The Development of a Framework for Target Diagnostic Centralized Control System (TDCCS) in ICF Experiments

International Nuclear Information System (INIS)

Zhang Chi; Wang Jian; Yu Xiaoqi; Yang Dong

2008-01-01

A framework for target diagnostic centralized control system (TDCCS) in inertial confinement fusion (ICF) experiment has been developed. The developed framework is based on the common object request broker architecture (CORBA) standard and part of the concept from the ICFRoot (a framework based on ROOT for ICF experiments) framework design. This framework is of a component architecture, including a message bus, command executer, status processor, parser and proxy. To test the function of the framework, a simplified prototype of the TDCCS has been developed as well.

A megajoule class krypton fluoride amplifier for single shot, high gain ICF application

International Nuclear Information System (INIS)

Rose, E.; Hanson, D.; Krohn, B.; McLeod, J.; Kang, M.

1988-01-01

A design study is underway to define the optimal architecture for a KrF laser system which will deliver 10 MJ of 248-nm light to an ICF target. We present one approach which incorporates final power amplifiers in the megajoule class, achieving 10 MJ with four final amplifiers. Each double-pass laser amplifier employs two-sided electron-beam pumping of the laser gas medium. Details of the design are based on a Monte-Carlo electron-beam deposition code, a one-dimensional, time-dependent kinetics code, and pulsed power circuit modeling. Linear dimensions of the amplifier's extracted gain volume are 6.25 m in height and length and 5.12 m in width. Each amplifier handles 160 angularly multiplexed laser channels. The one-amagat, krypton-rich laser medium is e-beam pumped at 60-kW cm/sup /minus/3/ (4-MA at3.3-MV) over the 2-microsecond duration of the laser beam pulse train. 5 refs., 4 figs

An alternative to the compact torus ICF driver

International Nuclear Information System (INIS)

Latter, A.L.; Martinelli, E.A.

1992-11-01

Plasma guns have been used in the Controlled Thermonuclear Reaction (CTR) Program to inject energetic deuterium-tritium plasma into a magnetic confinement machine, also for dense-plasma-focus devices to achieve fusion utilizing Z-pinches. In this report we propose another CTR application of a plasma gun: accelerating the plasma in a coaxial geometry to a speed in the neighborhood of a centimeter per shake with a total kinetic energy of about 20 MJ. The kinetic energy is efficiently converted to x-rays in a time of about a shake, and the x-ray pulse is used to implode an Inertial Confinement Fusion (ICF) capsule. As far as we know the plasma gun application we are proposing has not been explored before, but we observe that the LLNL Compact Torus Program hopes to accelerate a compact-torus-plasma to a comparable speed and energy and, in one of its applications, to generate x-rays for ICF purposes. In fact, the only difference between the LLNL Compact Torus Program and what we are proposing is that our plasma does not rely on imbedded magnetic fields and currents to minimize instabilities. We minimize instabilities by snowplowing the plasma to its required speed in a single shock. Which approach is better requires additional investigation

Practice, science and governance in interaction: European effort for the system-wide implementation of the International Classification of Functioning, Disability and Health (ICF) in Physical and Rehabilitation Medicine.

Science.gov (United States)

Stucki, Gerold; Zampolini, Mauro; Juocevicius, Alvydas; Negrini, Stefano; Christodoulou, Nicolas

2017-04-01

Since its launch in 2001, relevant international, regional and national PRM bodies have aimed to implement the International Classification of Functioning, Disability and Health (ICF) in Physical and Rehabilitation Medicine (PRM), whereby contributing to the development of suitable practical tools. These tools are available for implementing the ICF in day-to-day clinical practice, standardized reporting of functioning outcomes in quality management and research, and guiding evidence-informed policy. Educational efforts have reinforced PRM physicians' and other rehabilitation professionals' ICF knowledge, and numerous implementation projects have explored how the ICF is applied in clinical practice, research and policy. Largely lacking though is the system-wide implementation of ICF in day-to-day practice across all rehabilitation services of national health systems. In Europe, system-wide implementation of ICF requires the interaction between practice, science and governance. Considering its mandate, the UEMS PRM Section and Board have decided to lead a European effort towards system-wide ICF implementation in PRM, rehabilitation and health care at large, in interaction with governments, non-governmental actors and the private sector, and aligned with ISPRM's collaboration plan with WHO. In this paper we present the current PRM internal and external policy agenda towards system-wide ICF implementation and the corresponding implementation action plan, while highlighting priority action steps - promotion of ICF-based standardized reporting in national quality management and assurance programs, development of unambiguous rehabilitation service descriptions using the International Classification System for Service Organization in Health-related Rehabilitation, development of Clinical Assessment Schedules, qualitative linkage and quantitative mapping of data to the ICF, and the cultural adaptation of the ICF Clinical Data Collection Tool in European languages.

Monte Carlo methods in ICF

International Nuclear Information System (INIS)

Zimmerman, G.B.

1997-01-01

Monte Carlo methods appropriate to simulate the transport of x-rays, neutrons, ions and electrons in Inertial Confinement Fusion targets are described and analyzed. The Implicit Monte Carlo method of x-ray transport handles symmetry within indirect drive ICF hohlraums well, but can be improved 50X in efficiency by angular biasing the x-rays towards the fuel capsule. Accurate simulation of thermonuclear burn and burn diagnostics involves detailed particle source spectra, charged particle ranges, inflight reaction kinematics, corrections for bulk and thermal Doppler effects and variance reduction to obtain adequate statistics for rare events. It is found that the effects of angular Coulomb scattering must be included in models of charged particle transport through heterogeneous materials. copyright 1997 American Institute of Physics

Tritium and plutonium production as a step toward ICF commercialization

International Nuclear Information System (INIS)

Pendergrass, J.H.; Dudziak, D.J.

1984-01-01

The feasibility of a combined special nuclear materials (SNM) production plant/engineering test facility (ETF) with reduced pellet and driver performance requirements as a step toward commercialization of inertial confinement fusion (ICF) is examined. Blanket design and tritium production cost studies, the status of RandD programs, and the ETF role are emphasized

Modeling radiative transport in ICF plasmas on an IBM SP2 supercomputer

International Nuclear Information System (INIS)

Johansen, J.A.; MacFarlane, J.J.; Moses, G.A.

1995-01-01

At the University of Wisconsin-Madison the authors have integrated a collisional-radiative-equilibrium model into their CONRAD radiation-hydrodynamics code. This integrated package allows them to accurately simulate the transport processes involved in ICF plasmas; including the important effects of self-absorption of line-radiation. However, as they increase the amount of atomic structure utilized in their transport models, the computational demands increase nonlinearly. In an attempt to meet this increased computational demand, they have recently embarked on a mission to parallelize the CONRAD program. The parallel CONRAD development is being performed on an IBM SP2 supercomputer. The parallelism is based on a message passing paradigm, and is being implemented using PVM. At the present time they have determined that approximately 70% of the sequential program can be executed in parallel. Accordingly, they expect that the parallel version will yield a speedup on the order of three times that of the sequential version. This translates into only 10 hours of execution time for the parallel version, whereas the sequential version required 30 hours

Cascade ICF power reactor

International Nuclear Information System (INIS)

Hogan, W.J.; Pitts, J.H.

1986-01-01

The double-cone-shaped Cascade reaction chamber rotates at 50 rpm to keep a blanket of ceramic granules in place against the wall as they slide from the poles to the exit slots at the equator. The 1 m-thick blanket consists of layers of carbon, beryllium oxide, and lithium aluminate granules about 1 mm in diameter. The x rays and debris are stopped in the carbon granules; the neutrons are multiplied and moderated in the BeO and breed tritium in the LiAlO 2 . The chamber wall is made up of SiO tiles held in compression by a network of composite SiC/Al tendons. Cascade operates at a 5 Hz pulse rate with 300 MJ in each pulse. The temperature in the blanket reaches 1600 K on the inner surface and 1350 K at the outer edge. The granules are automatically thrown into three separate vacuum heat exchangers where they give up their energy to high pressure helium. The helium is used in a Brayton cycle to obtain a thermal-to-electric conversion efficiency of 55%. Studies have been done on neutron activation, debris recovery, vaporization and recondensation of blanket material, tritium control and recovery, fire safety, and cost. These studies indicate that Cascade appears to be a promising ICF reactor candidate from all standpoints. At the 1000 MWe size, electricity could be made for about the same cost as in a future fission reactor

Towards a common disability assessment framework: theoretical and methodological issues for providing public services and benefits using ICF.

Science.gov (United States)

Francescutti, Carlo; Frattura, Lucilla; Troiano, Raffaella; Gongolo, Francesco; Martinuzzi, Andrea; Sala, Marina; Meucci, Paolo; Raggi, Alberto; Russo, Emanuela; Buffoni, Mara; Gorini, Giovanna; Conclave, Mario; Petrangeli, Agostino; Solipaca, Alessandro; Leonardi, Matilde

2009-01-01

To report on the preliminary results of an Italian project on the implementation of an ICF-based protocol for providing public services and benefits for persons with disabilities. The UN Convention on the Rights of persons with disabilities (UNC) was mapped to the ICF, and core elements were implemented in an ICF-based evaluation protocol. A person-environment interaction classification (PEIC) tree was also developed for defining evaluation outputs. The PEIC and the ICF-based protocol are the guideline and the data interpretation source, respectively, for providing public services and benefits. They enable to assign persons to different services, from surveillance and monitoring to facilitator provision or sustain over time, to barrier removal or to the reorganisation of environmental factors provision. A detailed description of the target intervention is made available through the implementation of a protocol, which points out the effect of personal support and other environmental factors. The detailed description of functioning and disability provided by our methodology can help policy makers and administrators in decision making, on the basis of a description of real needs, and in targeting person-tailored interventions.

A case study on the application of International Classification of Functioning, Disability and Health (ICF)-based tools for vocational rehabilitation in spinal cord injury.

Science.gov (United States)

Glässel, Andrea; Rauch, Alexandra; Selb, Melissa; Emmenegger, Karl; Lückenkemper, Miriam; Escorpizo, Reuben

2012-01-01

Vocational rehabilitation (VR) plays a key role in bringing persons with acquired disabilities back to work, while encouraging employment participation. The purpose of this case study is to illustrate the systematic application of International Classification of Functioning, Disability, and Health (ICF)-based documentation tools by using ICF Core Sets in VR shown with a case example of a client with traumatic spinal cord injury (SCI). The client was a 26-year-old male with paraplegia (7th thoracic level), working in the past as a mover. This case study describes the integration of the ICF Core Sets for VR into an interdisciplinary rehabilitation program by using ICF-based documentation tools. Improvements in the client's impairments, activity limitations, and participation restrictions were observed following rehabilitation. Goals in different areas of functioning were achieved. The use of the ICF Core Sets in VR allows a comprehensive assessment of the client's level of functioning and intervention planning. Specifically, the Brief ICF Core Set in VR can provide domains for intervention relevant to each member of an interdisciplinary team and hence, can facilitate the VR management process in a SCI center in Switzerland.

Theranostic Approach for Metastatic Pigmented Melanoma Using ICF15002, a Multimodal Radiotracer for Both PET Imaging and Targeted Radionuclide Therapy

Directory of Open Access Journals (Sweden)

Latifa Rbah-Vidal

2017-01-01

Full Text Available PURPOSE: This work reports, in melanoma models, the theranostic potential of ICF15002 as a single fluorinated and iodinated melanin-targeting compound. METHODS: Studies were conducted in the murine syngeneic B16BL6 model and in the A375 and SK-MEL-3 human xenografts. ICF15002 was radiolabeled with fluorine-18 for positron emission tomography (PET imaging and biodistribution, with iodine-125 for metabolism study, and iodine-131 for targeted radionuclide therapy (TRT. TRT efficacy was assessed by tumor volume measurement, with mechanistics and dosimetry parameters being determined in the B16BL6 model. Intracellular localization of ICF15002 was characterized by secondary ion mass spectrometry (SIMS. RESULTS: PET imaging with [18F]ICF15002 evidenced tumoral uptake of 14.33 ± 2.11%ID/g and 4.87 ± 0.93%ID/g in pigmented B16BL6 and SK-MEL-3 models, respectively, at 1 hour post inoculation. No accumulation was observed in the unpigmented A375 melanoma. SIMS demonstrated colocalization of ICF15002 signal with melanin polymers in melanosomes of the B16BL6 tumors. TRT with two doses of 20 MBq [131I]ICF15002 delivered an absorbed dose of 102.3 Gy to B16BL6 tumors, leading to a significant tumor growth inhibition [doubling time (DT of 2.9 ± 0.5 days in treated vs 1.8 ± 0.3 in controls] and a prolonged median survival (27 days vs 21 in controls. P53S15 phosphorylation and P21 induction were associated with a G2/M blockage, suggesting mitotic catastrophe. In the human SK-MEL-3 model, three doses of 25 MBq led also to a DT increase (26.5 ± 7.8 days vs 11.0 ± 3.8 in controls and improved median survival (111 days vs 74 in controls. CONCLUSION: Results demonstrate that ICF15002 fulfills suitable properties for bimodal imaging/TRT management of patients with pigmented melanoma.

[Relevance of personal contextual factors of the ICF for use in practical social medicine and rehabilitation].

Science.gov (United States)

Grotkamp, S; Cibis, W; Bahemann, A; Baldus, A; Behrens, J; Nyffeler, I D; Echterhoff, W; Fialka-Moser, V; Fries, W; Fuchs, H; Gmünder, H P; Gutenbrunner, C; Keller, K; Nüchtern, E; Pöthig, D; Queri, S; Rentsch, H P; Rink, M; Schian, H-M; Schian, M; Schmitt, K; Schwarze, M; Ulrich, P; von Mittelstaedt, G; Seger, W

2014-03-01

Personal contextual factors play an essential part in the model of the International Classification of Functioning, Disability and Health (ICF). The WHO has not yet classified personal factors for global use although they impact on the functioning of persons positively or negatively. In 2010, the ICF working group of the German Society of Social Medicine and Prevention (DGSMP) presented a proposal for the classification of personal factors into 72 categories previously arranged in 6 chapters. Now a positioning paper has been added in order to stimulate a discussion about the fourth component of the ICF, to contribute towards a broader and common understanding about the nature of personal factors and to incite a dialogue among all those involved in health care as well as those people with or with-out health problems in order to gain a comprehensive perspective about a person's condition. © Georg Thieme Verlag KG Stuttgart · New York.

Measuring the absolute DT neutron yield using the Magnetic Recoil Spectrometer at OMEGA and the NIF

Energy Technology Data Exchange (ETDEWEB)

Mackinnon, A; Casey, D; Frenje, J A; Johnson, M G; Seguin, F H; Li, C K; Petrasso, R D; Glebov, V Y; Katz, J; Knauer, J; Meyerhofer, D; Sangster, T; Bionta, R; Bleuel, D; Hachett, S P; Hartouni, E; Lepape, S; Mckernan, M; Moran, M; Yeamans, C

2012-05-03

A Magnetic Recoil Spectrometer (MRS) has been installed and extensively used on OMEGA and the National Ignition Facility (NIF) for measurements of the absolute neutron spectrum from inertial confinement fusion (ICF) implosions. From the neutron spectrum measured with the MRS, many critical implosion parameters are determined including the primary DT neutron yield, the ion temperature, and the down-scattered neutron yield. As the MRS detection efficiency is determined from first principles, the absolute DT neutron yield is obtained without cross-calibration to other techniques. The MRS primary DT neutron measurements at OMEGA and the NIF are shown to be in excellent agreement with previously established yield diagnostics on OMEGA, and with the newly commissioned nuclear activation diagnostics on the NIF.

Tritium and plutonium production as a step toward ICF commercialization

International Nuclear Information System (INIS)

Pendergrass, J.H.; Dudziak, D.J.

1983-01-01

The feasibility of a combined special nuclear materials (SNM) production plant/engineering test facility (ETF) with reduced pellet and driver performance requirements as a step toward commercialization of inertial confinement fusion (ICF) is examined. Blanket design and tritium production cost studies, the status of R and D programs, and the ETF role are emphasized

Barriers, activities and participation: Incorporating ICF into service planning datasets.

LENUS (Irish Health Repository)

O'Donovan, MA

2009-05-21

Purpose. Guided by the World Health Organization\\'s International Classification of Functioning, Disability and Health (ICF), a measure of activity and participation (MAP) was developed and incorporated into the National Physical and Sensory Disability Database in Ireland. The aims of this article are to investigate and explore the relationship between the barriers, participation restriction and functioning levels experienced by people with disabilities. Method. Seven thousand five hundred and sixty-two personal interviews with people meeting specific eligibility criteria for registering onto the database were conducted across four health service executive regions in Ireland. Results. Overall, differences in barriers, participation restriction and activity limitations experienced by people with different types of disabilities were found to be significant. Furthermore, low functioning and experience of barriers were indicators of participation restriction. Conclusions. This article has shown that elements of the ICF have been successfully operationalised in a service planning tool through the development of the MAP. This provides a more holistic view of disability and will enable the impact of service interventions to be measured over time.

Classical and ablative Richtmyer-Meshkov instability and other ICF-relevant plasma flows diagnosed with monochromatic x-ray imaging

International Nuclear Information System (INIS)

Aglitskiy, Y; Metzler, N; Karasik, M; Velikovich, A L; Zalesak, S T; Schmitt, A J; Serlin, V; Weaver, J; Obenschain, S P; Gardner, J H

2008-01-01

In inertial confinement fusion (ICF) and high-energy density physics (HEDP), the most important manifestations of the hydrodynamic instabilities and other mixing processes involve lateral motion of the accelerated plasmas. In order to understand the experimental observations and to advance the numerical simulation codes to the point of predictive capability, it is critically important to accurately diagnose the motion of the dense plasma mass. The most advanced diagnostic technique recently developed for this purpose is the monochromatic x-ray imaging that combines large field of view with high contrast, high spatial resolution and large throughput, ensuring high temporal resolution at large magnification. Its application made it possible for the experimentalists to observe for the first time important hydrodynamic effects that trigger compressible turbulent mixing in laser targets, such as ablative Richtmyer-Meshkov (RM) instability, feedout, interaction of an RM-unstable interface with shock and rarefaction waves. It also helped to substantially improve the accuracy of diagnosing many other important plasma flows, ranging from laser-produced jets to electromagnetically driven wires in a Z-pinch, and to test various methods suggested for mitigation of the Rayleigh-Taylor instability. We will review the results obtained with the aid of this technique in ICF-HEDP studies at the Naval Research Laboratory and the prospects of its future applications.

Towards comparability of data: using the ICF to map the contrasting definitions of disability in Irish surveys and census, 2000-2006.

Science.gov (United States)

O'Donovan, Mary-Ann; Good, Anne

2010-01-01

To examine how disability was measured and understood within Irish data sources 2000-2006, using the International Classification of Functioning, Disability and Health (ICF) as a guiding framework for a more comprehensive and transformative definition of disability. During the EU-funded Measuring Health and Disability in Europe (MHADIE) project (2003-2006), an audit of data sources which included a disability identifier question was conducted. Thirty Irish data sources were examined in total. An overview of these data sources was provided in 'Disability Data Sources in Ireland' (National Disability Authority, unpublished, 2007). Using guidelines developed by Cieza et al. (J Rehabil Med 2002;34:205-210, J Rehabil Med 2002;27:212-218) five data sources were selected for detailed examination and were mapped to the ICF. These were the census (2006), National Disability Survey (2006), National Physical and Sensory Disability Database (2006), Survey of Lifestyles, Attitudes and Nutrition (2002), Euro Student Survey (2003). Subsequent work conducted after the completion of the MHADIE project added to the findings. The environmental dimension of disability dominated the data collection exercises which used the ICF as their framework-for the National Disability Survey (NDS) and the National Physical and Sensory Disability Database (NPSDD). Both also had strong focus on activity and participation. When mapped on to the ICF, the data sources which preceded the ICF or did not use it, are shown to focus more on activity and participation data than any other ICF component. Across the five selected data sources, limited information was collected on body function and body structure.

Measurement of activity limitations and participation restrictions: examination of ICF-linked content and scale properties of the FIM and PC-PART instruments.

Science.gov (United States)

Darzins, Susan W; Imms, Christine; Di Stefano, Marilyn

2017-05-01

To explore the operationalization of activity and participation-related measurement constructs through comparison of item phrasing, item response categories and scoring (scale properties) for two separate instruments targeting activities of daily living. Personal Care Participation Assessment and Resource Tool (PC-PART) item content was linked to ICF categories using established linking rules. Previously reported ICF-linked FIM content categories and ICF-linked PC-PART content categories were compared to identify common ICF categories between the instruments. Scale properties of both instruments were compared using a patient scenario to explore the instruments' separate measurement constructs. The PC-PART and FIM shared 15 of the 53 level two ICF-linked categories identified across both instruments. Examination of the instruments' scale properties for items with overlapping ICF content, and exploration through a patient scenario, provided supportive evidence that the instruments measure different constructs. While the PC-PART and FIM share common ICF-linked content, they measure separate constructs. Measurement construct was influenced by the instruments' scale properties. The FIM was observed to measure activity limitations and the PC-PART measured participation restrictions. Scrutiny of instruments' scale properties in addition to item content is critical in the operationalization of activity and participation-related measurement constructs. Implications for Rehabilitation When selecting outcome measures for use in rehabilitation it is necessary to examine both the content of the instruments' items and item phrasing, response categories and scoring, to clarify the construct being measured. Measurement of activity limitations as well as participation restrictions in activities of daily living required for community life provides a more comprehensive measurement of rehabilitation outcomes than measurement of either construct alone. To measure the effects of

High-yield pulping effluent treatment technologies

International Nuclear Information System (INIS)

Su, W.X.; Hsieh, J.S.

1993-03-01

The objective of this report is to examine the high-yield (mechanical) pulp processes with respect to environmental issues affected by the discharge of their waste streams. Various statistics are given that support the view that high-yield pulping processes will have major growth in the US regions where pulp mills are located, and sites for projects in the development phase are indicated. Conventional and innovative effluent-treatment technologies applicable to these processes are reviewed. The different types of mechanical pulping or high-yield processes are explained, and the chemical additives are discussed. The important relationship between pulp yield and measure of BOD in the effluent is graphically presented. Effluent contaminants are identified, along with other important characteristics of the streams. Current and proposed environmental limitations specifically related to mechanical pulp production are reviewed. Conventional and innovative effluent-treatment technologies are discussed, along with their principle applications, uses, advantages, and disadvantages. Sludge management and disposal techniques become an intimate part of the treatment of waste streams. The conclusion is made that conventional technologies can successfully treat effluent streams under current waste-water discharge limitations, but these systems may not be adequate when stricter standards are imposed. At present, the most important issue in the treatment of pulp-mill waste is the management and disposal of the resultant sludge

Mapping SAGE questionnaire to the International Classification of Functioning, Disability and Health (ICF).

Science.gov (United States)

Raggi, Alberto; Quintas, Rui; Russo, Emanuela; Martinuzzi, Andrea; Costardi, Daniela; Frisoni, Giovanni Battista; Franco, Maria Grazia; Andreotti, Alessandra; Ojala, Matti; Peña, Sebastián; Perales, Jaime; Chatterji, Somnath; Miret, Marta; Tobiasz-Adamczyk, Beata; Koskinen, Seppo; Frattura, Lucilla; Leonardi, Matilde

2014-01-01

The collaborative research on ageing in Europe protocol was based on that of the World Health Organization Study on global AGEing and adult health (SAGE) project that investigated the relationship between health and well-being and provided a set of instruments that can be used across countries to monitor health and health-related outcomes of older populations as well as the strategies for addressing issues concerning the ageing process. To evaluate the degree to which SAGE protocol covered the spectrum of disability given the scope of the World Health Organization International Classification of Functioning, Disability and Health (ICF), a mapping exercise was performed with SAGE protocol. Results show that the SAGE protocol covers ICF domains in a non-uniform way, with environmental factors categories being underrepresented, whereas mental, cardiovascular, sensory functions and mobility were overrepresented. To overcome this partial coverage of ICF functioning categories, new assessment instruments have been developed. PRACTITIONER MESSAGE: Mapping exercises are valid procedures to understand the extent to which a survey protocol covers the spectrum of functioning. The mapping exercise with SAGE protocol shows that it provides only a partial representation of body functions and activities and participation domains, and the coverage of environmental factors is poor. New instruments are therefore needed for researchers to properly understand the health and disability of ageing populations. Copyright © 2013 John Wiley & Sons, Ltd.

ND:GLASS LASER DESIGN FOR LASER ICF FISSION ENERGY (LIFE)

Energy Technology Data Exchange (ETDEWEB)

Caird, J A; Agrawal, V; Bayramian, A; Beach, R; Britten, J; Chen, D; Cross, R; Ebbers, C; Erlandson, A; Feit, M; Freitas, B; Ghosh, C; Haefner, C; Homoelle, D; Ladran, T; Latkowski, J; Molander, W; Murray, J; Rubenchik, S; Schaffers, K; Siders, C W; Stappaerts, E; Sutton, S; Telford, S; Trenholme, J; Barty, C J

2008-10-28

We have developed preliminary conceptual laser system designs for the Laser ICF (Inertial Confinement Fusion) Fission Energy (LIFE) application. Our approach leverages experience in high-energy Nd:glass laser technology developed for the National Ignition Facility (NIF), along with high-energy-class diode-pumped solid-state laser (HEC-DPSSL) technology developed for the DOE's High Average Power Laser (HAPL) Program and embodied in LLNL's Mercury laser system. We present laser system designs suitable for both indirect-drive, hot spot ignition and indirect-drive, fast ignition targets. Main amplifiers for both systems use laser-diode-pumped Nd:glass slabs oriented at Brewster's angle, as in NIF, but the slabs are much thinner to allow for cooling by high-velocity helium gas as in the Mercury laser system. We also describe a plan to mass-produce pump-diode lasers to bring diode costs down to the order of $0.01 per Watt of peak output power, as needed to make the LIFE application economically attractive.

Assessment of functioning in the acute hospital: operationalisation and reliability testing of ICF categories relevant for physical therapists interventions.

Science.gov (United States)

Grill, Eva; Gloor-Juzi, Thomas; Huber, Erika O; Stucki, Gerold

2011-01-01

To operationalize items based on categories of the International Classification of Functioning, Disability and Health (ICF) relevant to patient problems that are addressed by physiotherapeutic interventions in the acute hospital, and to test the reliability of these items when applied by physiotherapists. A selection of 124 ICF categories was operation-alized in a formal decision-making and consensus process. The reliability of the newly operationalized item list was tested with a cross-sectional study with repeated measurements. The item writing process resulted in 94 dichotomous and 30 polytomous items. Data were collected in a convenience sample of 28 patients with neurological, musculoske-letal, cardiopulmonary, or internal organ conditions, requiring physical therapy in an acute hospital. Fifty-six percent of the polytomous and 68% of the dichotomous items had a raw agreement of 0.7 or above, whereas 36% of all polytomous and 34% of all dichotomous items had a kappa coefficient of 0.7 and above. The study supports that the ICF is adaptable to professional and setting-specific needs of physiotherapists. Further research towards the development of reliable instruments for physiotherapists based on the ICF seems justified. :

Families' perception of children / adolescents with language impairment through the International Classification of Functioning, Disability, and Health (ICF-CY).

Science.gov (United States)

Ostroschi, Daniele Theodoro; Zanolli, Maria de Lurdes; Chun, Regina Yu Shon

2017-05-22

To investigate the perception of family members regarding linguistic conditions and social participation of children and adolescents with speech and language impairments using the International Classification of Functioning, Disability and Health - Children and Youth Version (ICF-CY). Quali-quantitative approach research, in which a survey of medical records of 24 children/adolescents undergoing speech-language therapy and interviews with their family members was conducted. A descriptive analysis of the participants' profiles was performed, followed by a categorization of responses using the ICF-CY. All family members mentioned various aspects of speech/language categorized by the ICF-CY. Initially, they approached it as an organic issue, categorized under the component of Body Functions and Structures. Most reported different repercussions of the speech-language impairments on the domains, such as dealing with stress and speaking, qualified from mild to severe. Participants reported Environmental Factors categorized as facilitators in the immediate family's attitudes and as barriers in the social attitudes. These findings, according to the use of the ICF-CY, demonstrate that the children/adolescents' speech-language impairments, from the families' perception, are primarily understood in the body dimension. However, guided by a broader approach to health, the findings in the Activities and Participation and Environmental Factors demonstrate a broader understanding of the participants of the speech-language impairments. The results corroborate the importance of using the ICF-CY as a health care analysis tool, by incorporating functionality and participation aspects and providing subsidies for the construction of unique therapeutic projects in a broader approach to the health of the group studied.

Enhancing Ignition Probability and Fusion Yield in NIF Indirect Drive Targets with Applied Magnetic Fields

Science.gov (United States)

Perkins, L. John; Logan, B. Grant; Ho, Darwin; Zimmerman, George; Rhodes, Mark; Blackfield, Donald; Hawkins, Steven

2017-10-01

Imposed magnetic fields of tens of Tesla that increase to greater than 10 kT (100 MGauss) under capsule compression may relax conditions for ignition and propagating burn in indirect-drive ICF targets. This may allow attainment of ignition, or at least significant fusion energy yields, in presently-performing ICF targets on the National Ignition Facility that today are sub-marginal for thermonuclear burn through adverse hydrodynamic conditions at stagnation. Results of detailed 2D radiation-hydrodynamic-burn simulations applied to NIF capsule implosions with low-mode shape perturbations and residual kinetic energy loss indicate that such compressed fields may increase the probability for ignition through range reduction of fusion alpha particles, suppression of electron heat conduction and stabilization of higher-mode RT instabilities. Optimum initial applied fields are around 50 T. Off-line testing has been performed of a hohlraum coil and pulsed power supply that could be integrated on NIF; axial fields of 58T were obtained. Given the full plasma structure at capsule stagnation may be governed by 3-D resistive MHD, the formation of closed magnetic field lines might further augment ignition prospects. Experiments are now required to assess the potential of applied magnetic fields to NIF ICF ignition and burn. Work performed under auspices of U.S. DOE by LLNL under Contract DE-AC52-07NA27344.

Multi-dimensional cubic interpolation for ICF hydrodynamics simulation

International Nuclear Information System (INIS)

Aoki, Takayuki; Yabe, Takashi.

1991-04-01

A new interpolation method is proposed to solve the multi-dimensional hyperbolic equations which appear in describing the hydrodynamics of inertial confinement fusion (ICF) implosion. The advection phase of the cubic-interpolated pseudo-particle (CIP) is greatly improved, by assuming the continuities of the second and the third spatial derivatives in addition to the physical value and the first derivative. These derivatives are derived from the given physical equation. In order to evaluate the new method, Zalesak's example is tested, and we obtain successfully good results. (author)

Recent progress on the Los Alamos Aurora ICF [inertial confinement fusion] laser system

International Nuclear Information System (INIS)

Rosocha, L.A.; Blair, L.S.

1987-01-01

Aurora is the Los Alamos short-pulse, high-power, krypton-fluoride laser system. It serves as an end-to-end technology demonstration prototype for large-scale ultraviolet laser systems for short wavelength inertial confinement fusion (ICF) investigations. The system is designed to employ optical angular multiplexing and serial amplification by electron-beam-driven KrF laser amplifiers to deliver stacked, 248-nm, 5-ns duration multikilojoule laser pulses to ICF-relevant targets. This paper presents a summary of the Aurora system and a discussion of the progress achieved in the construction and integration of the laser system. We concentrate on the main features of the following major system components: front-end lasers, amplifier train, multiplexer, optical relay train, demultiplexer, and the associated optical alignment system. During the past year, two major construction and integration tasks have been accomplished. The first task is the demonstration of 96-beam multiplexing and amplified energy extraction, as evidenced by the integrated operation of the front end, the multiplexer (12-fold and 8-fold encoders), the optical relay train, and three electron-beam-driven amplifiers. The second task is the assembly and installation of the demultiplexer optical hardware, which consists of over 300 optical components ranging in size from several centimeters square to over a meter square. 13 refs., 13 figs

Properties of partially ionized hydrogen plasmas in high electric fields

International Nuclear Information System (INIS)

Morawetz, K.

1993-03-01

In this thesis the fundamental equations of many-particle quantum-statistics of nonequilibrium are treated in respect to arbitrary high electric fields. Generalizations are found for the T-matrix approximation as well as for the shielded potential approximation valid for any field strength. These result in a non-Markovian behavior of the obtained collision integrals, also known as intra-collisional-field-effect (ICFE), and in a broadening of the energy conservation, the so-called collisional broadening (CB), caused by applied electric fields. In linear response it is shown in a new way, how the Debye-Onsager relaxation effect can be rederived from these collision integrals. Furthermore the complete quantum result is presented. Both effects, ICFE and CB, contribute to the right classical limit. The quantum result yields an surprising maximum of this field effects in dependence of the interacting mass ratio, which may be important in exciton-plasmas and semiconductors. (orig.)

ICF ignition capsule neutron, gamma ray, and high energy x-ray images

Science.gov (United States)

Bradley, P. A.; Wilson, D. C.; Swenson, F. J.; Morgan, G. L.

2003-03-01

Post-processed total neutron, RIF neutron, gamma-ray, and x-ray images from 2D LASNEX calculations of burning ignition capsules are presented. The capsules have yields ranging from tens of kilojoules (failures) to over 16 MJ (ignition), and their implosion symmetry ranges from prolate (flattest at the hohlraum equator) to oblate (flattest towards the laser entrance hole). The simulated total neutron images emphasize regions of high DT density and temperature; the reaction-in-flight neutrons emphasize regions of high DT density; the gamma rays emphasize regions of high shell density; and the high energy x rays (>10 keV) emphasize regions of high temperature.

Implementing the ICF in Occupational Health; building a curriculum as an exemplary case.

Science.gov (United States)

de Brouwer, Carin P M; van Amelsvoort, Ludovic G P M; Heerkens, Yvonne F; Widdershoven, Guy A M; Kant, IJmert

2017-01-01

This paper addresses the need for a paradigm shift from post-diagnosis tertiary care towards maintenance and promotion of health across the lifespan, for healthcare in general and in occupational healthcare specifically. It is based on the assumption that the realization of this paradigm shift may be facilitated by teaching (future) occupational health professionals to use the International Classification of Functioning, Disability and Health (ICF). Describing the development of a an ICF based occupational health curriculum. Grafting a training trajectory in the ICF for educating the biopsychosocial health paradigm, onto a training trajectory in the Critical Appraisal of a Topic (CAT), a method for teaching evidence based practice skills. The development process of the training trajectories in the master program Work, Health, and Career at Maastricht University is described as an example of an intervention for shifting the paradigm in healthcare curricula. The expected results are a shift from the biomedical towards the biopsychosocial paradigm, a reductionist approach towards a more holistic view on cases, a reactive way of working towards a more proactive work style, and from using a merely quantifiable evidence base towards using a broad evidence base. Incorporating the biopsychosocial paradigm into the assessment and scientific reasoning skills of students is not only valuable in occupational healthcare but might be a valuable approach for all disciplines in healthcare for which contextual factors are important e.g. rehabilitation, psychiatry and nutritional science.

PREOVULATORY FOLLICLE DEVELOPMENT IN HIGH YIELDING COWS

Directory of Open Access Journals (Sweden)

Radovan Tomášek

2013-06-01

Full Text Available The aim of the study was to examine the development of preovulatory follicles in pregnant and non-pregnant high yielding cows. The treatment by supergestran and oestrophan was used to synchronize the estrous cycle. Ovaries were monitored by transrectal ultrasonography. The linear increase of preovulatory follicles was observed in pregnant (P < 0,001 and non-pregnant (P < 0,001 cows during 8 days before ovulation. In conclusion, preovulatory follicles in pregnant and non-pregnant high yielding cows developed similarly.

The ICF as a common language for rehabilitation goal-setting: comparing client and professional priorities

Directory of Open Access Journals (Sweden)

van der Merwe Aletia

2011-10-01

Full Text Available Abstract Background Joint rehabilitation goals are an important component for effective teamwork in the rehabilitation field. The activities and participation domain of the ICF provides a common language for professionals when setting these goals. Involving clients in the formulation of rehabilitation goals is gaining momentum as part of a person-centred approach to rehabilitation. However, this is particularly difficult when clients have an acquired communication disability. The expressive communication difficulties negatively affect the consensus building process. As a result, obtaining information regarding rehabilitation goals from professionals and their clients warrants further investigation for this particular population. Methods This comparative study investigated clients and their assigned rehabilitation professionals' perception of the importance of ICF activities and participation domains for inclusion in their rehabilitation program. Twelve clients in an acute rehabilitation centre and twenty of their corresponding rehabilitation professionals participated in an activity using the Talking Mats™ visual framework for goal setting. Each participant rated the importance of the nine activities and participation domains of the ICF for inclusion in their current rehabilitation program. Results The ICF domains which consistently appear as very important across these groups are mobility, self-care and communication. Domains which consistently appear in the lower third of the rankings include spare time, learning and thinking and domestic life. Results indicate however that no statistical significant differences exist in terms of the individual domains across each of the participant groups. Within group differences however indicated that amongst the speech-language therapists and physiotherapists there was a statistical significant difference between spare time activities and communication and mobility. Conclusions Findings indicate that

High-biomass C4 grasses-Filling the yield gap.

Science.gov (United States)

Mullet, John E

2017-08-01

A significant increase in agricultural productivity will be required by 2050 to meet the needs of an expanding and rapidly developing world population, without allocating more land and water resources to agriculture, and despite slowing rates of grain yield improvement. This review examines the proposition that high-biomass C 4 grasses could help fill the yield gap. High-biomass C 4 grasses exhibit high yield due to C 4 photosynthesis, long growth duration, and efficient capture and utilization of light, water, and nutrients. These C 4 grasses exhibit high levels of drought tolerance during their long vegetative growth phase ideal for crops grown in water-limited regions of agricultural production. The stems of some high-biomass C 4 grasses can accumulate high levels of non-structural carbohydrates that could be engineered to enhance biomass yield and utility as feedstocks for animals and biofuels production. The regulatory pathway that delays flowering of high-biomass C 4 grasses in long days has been elucidated enabling production and deployment of hybrids. Crop and landscape-scale modeling predict that utilization of high-biomass C 4 grass crops on land and in regions where water resources limit grain crop yield could increase agricultural productivity. Copyright © 2017 Elsevier B.V. All rights reserved.

The International Classification of Functioning, Disability and Health (ICF): a unifying model for the conceptual description of the rehabilitation strategy.

Science.gov (United States)

Stucki, Gerold; Cieza, Alarcos; Melvin, John

2007-05-01

An important basis for the successful development of rehabilitation practice and research is a conceptually sound description of rehabilitation understood as a health strategy based on a universally accepted conceptual model and taxonomy of human functioning. With the approval of the International Classification of Functioning, Disability and Health (ICF) by the World Health Assembly in 2001 and the reference to the ICF in the World Health Assembly's resolution on "Disability, including prevention, management and rehabilitation" in 2005, we can now rely on a universally accepted conceptual model. It is thus time to initiate the process of evolving an ICF-based conceptual description that can serve as a basis for similar conceptual descriptions and according definitions of the professions applying the rehabilitation strategy and of distinct scientific fields of human functioning and rehabilitation research. In co-operation with the Physical and Rehabilitation Medicine (PRM) section of the European Union of Medical Specialists (UEMS) and its professional practice committee, we present a first tentative version of an ICF-based conceptual description in this paper. A brief definition describes rehabilitation as the health strategy applied by PRM and professionals in the health sector and across other sectors that aims to enable people with health conditions experiencing or likely to experience disability to achieve and maintain optimal functioning in interaction with the environment. Readers of the Journal of Rehabilitation Medicine are invited to contribute towards achieving an internationally accepted ICF-based conceptual description of rehabilitation by submitting commentaries to the Editor of this journal.

Assessment of functioning in patients with schizophrenia and schizoaffective disorder with the Mini-ICF-APP: a validation study in Italy

OpenAIRE

Pinna, Federica; Fiorillo, Andrea; Tusconi, Massimo; Guiso, Beatrice; Carpiniello, Bernardo

2015-01-01

Background The aim of the study was to evaluate validity of the Italian Mini-ICF-APP (Mini-ICF Rating for Limitations of Activities and Participation in Psychological Disorders) in schizophrenia and related disorders. Methods 74 outpatients affected by schizophrenia or schizoaffective disorders attending a University-based community mental health centre were recruited to the study. All participants underwent comprehensive evaluation using standardized instruments to assess clinical, neurocogn...

Cryogenic tritium-hydrogen-deuterium and deuterium-tritium layer implosions with high density carbon ablators in near-vacuum hohlraums

International Nuclear Information System (INIS)

Meezan, N. B.; Hopkins, L. F. Berzak; Pape, S. Le; Divol, L.; MacKinnon, A. J.; Döppner, T.; Ho, D. D.; Jones, O. S.; Khan, S. F.; Ma, T.; Milovich, J. L.; Pak, A. E.; Ross, J. S.; Thomas, C. A.; Benedetti, L. R.; Bradley, D. K.; Celliers, P. M.; Clark, D. S.; Field, J. E.; Haan, S. W.

2015-01-01

High Density Carbon (or diamond) is a promising ablator material for use in near-vacuum hohlraums, as its high density allows for ignition designs with laser pulse durations of <10 ns. A series of Inertial Confinement Fusion (ICF) experiments in 2013 on the National Ignition Facility [Moses et al., Phys. Plasmas 16, 041006 (2009)] culminated in a deuterium-tritium (DT) layered implosion driven by a 6.8 ns, 2-shock laser pulse. This paper describes these experiments and comparisons with ICF design code simulations. Backlit radiography of a tritium-hydrogen-deuterium (THD) layered capsule demonstrated an ablator implosion velocity of 385 km/s with a slightly oblate hot spot shape. Other diagnostics suggested an asymmetric compressed fuel layer. A streak camera-based hot spot self-emission diagnostic (SPIDER) showed a double-peaked history of the capsule self-emission. Simulations suggest that this is a signature of low quality hot spot formation. Changes to the laser pulse and pointing for a subsequent DT implosion resulted in a higher temperature, prolate hot spot and a thermonuclear yield of 1.8 × 10 15 neutrons, 40% of the 1D simulated yield

Cryogenic tritium-hydrogen-deuterium and deuterium-tritium layer implosions with high density carbon ablators in near-vacuum hohlraums

Energy Technology Data Exchange (ETDEWEB)

Meezan, N. B., E-mail: meezan1@llnl.gov; Hopkins, L. F. Berzak; Pape, S. Le; Divol, L.; MacKinnon, A. J.; Döppner, T.; Ho, D. D.; Jones, O. S.; Khan, S. F.; Ma, T.; Milovich, J. L.; Pak, A. E.; Ross, J. S.; Thomas, C. A.; Benedetti, L. R.; Bradley, D. K.; Celliers, P. M.; Clark, D. S.; Field, J. E.; Haan, S. W. [Lawrence Livermore National Laboratory, P.O. Box 808, Livermore, California 94551-0808 (United States); and others

2015-06-15

High Density Carbon (or diamond) is a promising ablator material for use in near-vacuum hohlraums, as its high density allows for ignition designs with laser pulse durations of <10 ns. A series of Inertial Confinement Fusion (ICF) experiments in 2013 on the National Ignition Facility [Moses et al., Phys. Plasmas 16, 041006 (2009)] culminated in a deuterium-tritium (DT) layered implosion driven by a 6.8 ns, 2-shock laser pulse. This paper describes these experiments and comparisons with ICF design code simulations. Backlit radiography of a tritium-hydrogen-deuterium (THD) layered capsule demonstrated an ablator implosion velocity of 385 km/s with a slightly oblate hot spot shape. Other diagnostics suggested an asymmetric compressed fuel layer. A streak camera-based hot spot self-emission diagnostic (SPIDER) showed a double-peaked history of the capsule self-emission. Simulations suggest that this is a signature of low quality hot spot formation. Changes to the laser pulse and pointing for a subsequent DT implosion resulted in a higher temperature, prolate hot spot and a thermonuclear yield of 1.8 × 10{sup 15} neutrons, 40% of the 1D simulated yield.

An ICF-Based Model for Implementing and Standardizing Multidisciplinary Obesity Rehabilitation Programs within the Healthcare System

Directory of Open Access Journals (Sweden)

Amelia Brunani

2015-05-01

Full Text Available Introduction/Objective: In this study, we aimed to design an ICF-based individual rehabilitation project for obese patients with comorbidities (IRPOb integrated into the Rehab-CYCLE to standardize rehabilitative programs. This might facilitate the different health professionals involved in the continuum of care of obese patients to standardize rehabilitation interventions. Methods: After training on the ICF and based on the relevant studies, ICF categories were identified in a formal consensus process by our multidisciplinary team. Thereafter, we defined an individual rehabilitation project based on a structured multi-disciplinary approach to obesity. Results: the proposed IRPOb model identified the specific intervention areas (nutritional, physiotherapy, psychology, nursing, the short-term goals, the intervention modalities, the professionals involved and the assessment of the outcomes. Information was shared with the patient who signed informed consent. Conclusions: The model proposed provides the following advantages: (1 standardizes rehabilitative procedures; (2 facilitates the flow of congruent and updated information from the hospital to outpatient facilities, relatives, and care givers; (3 addresses organizational issues; (4 might serve as a benchmark for professionals who have limited specific expertise in rehabilitation of comorbid obese patients.

Adapting an x-ray/debris shield to the cascade ICF power plant: Neutronics issues

International Nuclear Information System (INIS)

Tobin, M.T.

1990-01-01

A neutronics analysis has been carried out to determine the effects on the Cascade ICF reactor concept of adding a solid-lithium x-ray and debris shield to each ICF capsule. Results indicate that tritium breeding in LiAlO 2 is possible with a modest isotopic enhancement in 6 Li (to 15%). The shallow-burial index is greater than 1 (indicating that deep burial may be required) if the blanket is kept in the reactor for more than 2.5 yr. Nine percent of the total thermal power is unrecoverable. Parts of the chamber wall may require replacement once during the reactor life due to radiation damage. Part of the SiC chamber end cap must be replaced annually. The reactor may not require any nuclear-grade construction. 20 refs., 4 figs., 3 tabs

Analysis on two technologic errors of color separation grating used for ICF

International Nuclear Information System (INIS)

Chen Dewei; Li Yongping

2003-01-01

In this paper, the depth of color separation grating applied in ICF system is optimized firstly for good separating effect. After this, duty cycle error and the trapezoid structure are analyzed. A probable scope of technologic error that make the color separation grating have good effect is given in the end

Site support program plan for ICF Kaiser Hanford Company, Revision 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-10-01

This document is the general administrative plan implemented by the Hanford Site contractor, ICF Kaiser Hanford Company. It describes the mission, administrative structure, projected staffing, to be provided by the contractor. The report breaks out the work responsibilities within the different units of the company, a baseline schedule for the different groups, and a cost summary for the different operating units.

Site support program plan for ICF Kaiser Hanford Company, Revision 1

International Nuclear Information System (INIS)

1995-10-01

This document is the general administrative plan implemented by the Hanford Site contractor, ICF Kaiser Hanford Company. It describes the mission, administrative structure, projected staffing, to be provided by the contractor. The report breaks out the work responsibilities within the different units of the company, a baseline schedule for the different groups, and a cost summary for the different operating units

Wetted Foam Liquid DT Layer ICF Experiments at the NIF

Science.gov (United States)

Olson, R. E.; Leeper, R. J.; Peterson, R. R.; Yi, S. A.; Zylstra, A. B.; Kline, J. L.; Bradley, P. A.; Yin, L.; Wilson, D. C.; Haines, B. M.; Batha, S. H.

2016-10-01

A key physics issue in indirect-drive ICF relates to the understanding of the limitations on hot spot convergence ratio (CR), principally set by the hohlraum drive symmetry, the capsule mounting hardware (the ``tent''), and the capsule fill tube. An additional key physics issue relates to the complex process by which a hot spot must be dynamically formed from the inner ice surface in a DT ice-layer implosion. These physics issues have helped to motivate the development of a new liquid DT layer wetted foam platform at the NIF that provides an ability to form the hot spot from DT vapor and experimentally study and understand hot spot formation at a variety of CR's in the range of 12hot spot and the low adiabat cold fuel during the stagnation process and can allow for a fundamentally different (and potentially more robust) process of hot spot formation. This new experimental platform is currently being used in a series of experiments to discover a range of CR's at which DT layered implosions will have understandable performance - providing a sound basis from which to determine the requirements for ICF ignition. This work was performed under the auspices of the U. S. DOE by LANL under contract DE-AC52-06NA25396.

Parametric systems analysis for ICF hybrid reactors

International Nuclear Information System (INIS)

Berwald, D.H.; Maniscalco, J.A.; Chapin, D.L.

1981-01-01

Parametric design and systems analysis for inertial confinement fusion-fission hybrids are presented. These results were generated as part of the Electric Power Research Institute (EPRI) sponsored Feasibility Assessment of Fusion-Fission Hybrids, using an Inertial Confinement Fusion (ICF) hybrid power plant design code developed in conjunction with the feasibility assessment. The SYMECON systems analysis code, developed by Westinghouse, was used to generate economic results for symbiotic electricity generation systems consisting of the hybrid and its client Light Water Reactors (LWRs). These results explore the entire fusion parameter space for uranium fast fission blanket hybrids, thorium fast fission blanket hybrids, and thorium suppressed fission blanket types are discussed, and system sensitivities to design uncertainties are explored

High yielding mutants of blackgram variety 'PH-25'

International Nuclear Information System (INIS)

Misra, R.C.; Mohapatra, B.D.; Panda, B.S.

2001-01-01

Seeds of blackgram (Vigna mungo L.) variety 'PH-5' were treated with chemical mutagens ethyl methanesulfonate (EMS), nitrosoguanidine (NG), maleic hydrazide (MH) and sodium azide (NaN 3 ), each at 3 different concentrations. Thirty six mutant lines developed from mutagenic treatments along with parent varieties were tested in M 4 generation. The mutants showed wide variation in most of the traits and multivariante D 2 analysis showed genetic divergence among themselves. Twenty of the thirty mutants showed genetic divergence from parent. Ten selected high yielding mutants were tested in M 5 . Yield and other productive traits of five high yielding mutants in M 4 and M 5 are presented

Fusion with Z-pinches

International Nuclear Information System (INIS)

Cook, D.

1998-06-01

In the past thirty-six months, great progress has been made in x-ray production using high-current z-pinches. Today, the x-ray energy and power output of the Z accelerator (formerly PBFA-II) is the largest available in the laboratory. These z-pinch x-ray sources have the potential to drive high-yield ICF reactions at affordable cost if several challenging technical problems can be overcome. In this paper, the recent technical progress with Z-pinches will be described, and a technical strategy for achieving high-yield ICF with z-pinches will be presented

Frequency of cardiac arrhythmias in high and low- yielding dairy cows

Directory of Open Access Journals (Sweden)

Afshin Jafari Dehkordi

2014-06-01

Full Text Available Electrocardiography (ECG may be used to recognize cardiac disorders. Levels of milk production may change the serum electrolytes which its imbalance has a role in cardiac arrhythmia. Fifty high yielding and fifty low yielding Holstein dairy cows were used in this study. Electrocardiography was recorded by base-apex lead and blood samples were collected from jugular vein for measurement of serum elements such as sodium, potassium, calcium, phosphorous, iron and magnesium. Cardiac dysrhythmias were detected more frequent in low yielding Holstein cows (62.00% compared to high yielding Holstein cows (46.00%. The cardiac dysrhythmias that were observed in low yielding Holstein cows included sinus arrhythmia (34.70%, wandering pacemaker (22.45 %, bradycardia (18.37%, tachycardia (10.20%, atrial premature beat (2.04%, sinoatrial block (2.04%, atrial fibrillation (8.16% and atrial tachycardia (2.04%. The cardiac dysrhythmias were observed in high yielding Holstein cows including, sinus arrhythmia (86.95% and wandering pacemaker (13.05%. Also, notched P wave was observed to be 30% and 14% in high- and low- yielding Holstein cows respectively. The serum calcium concentration of low yielding Holstein cows was significantly lower than that of high yielding Holstein cows. There was not any detectable significant difference in other serum elements between high- and low- yielding Holstein cows. Based on the result of present study, could be concluded that low serum concentration of calcium results to more frequent dysrhythmias in low yielding Holstein cows.

Development of high yielding mutants in lentil

International Nuclear Information System (INIS)

Rajput, M.A.; Sarwar, G.; Siddiqui, K.A.

2001-01-01

Full text: Lentil (Lens culinaris Medik.) locally known as Masoor, is the second most important rabi pulse crop, after chickpea, in Pakistan. It is cultivated on an area of over 63,400 ha, which constitutes about 4.83% of the total area under pulses. The annual production of the crop is 28,200 tones with an average yield of 445 kg/ha. Yield at the national level is very low, about one-half of the world's yield, which is mainly due to non-availability of high yield potential genotypes. Keeping in view the importance of mutants in developing a large number of new varieties, an induced mutations programme was initiated at AEARC, Tandojam during 1987-88, to develop high yielding varieties in lentil. For this, seeds of two lentil varieties, 'Masoor-85' and 'ICARDA-8' had been irradiated with gamma-rays ranging from 100-600 Gy in NIAB, Faisalabad during 1990. Selections were made in M2 on the basis of earliness, plant height, branches/plant and 100 grain weight. After confirming these mutants in M3 they were promoted in station yield trials and studied continuously for three consecutive years (1993- 1995). Overall results revealed that these mutants have consistent improvement of earliness in flowering and maturity. Plant height also increased in all mutant lines except AEL 23/40/91 where reduction in this attribute was observed as compared to parent variety. Mutant lines AEL 49/20/91 and AEL 13/30/91 showed improvement in 100 grain weight. The improvement of some agronomic characters enhanced the yield of mutant lines in comparison to parent varieties (Masoor-85 and ICARDA-8). The diversity in yield over the respective parents was computed from 6.94 to 60.12%. From these encouraging results it is hoped that mutant lines like AEL 12/30/91 and AEL 49/20/91 may serve as potential lentil genotypes in future. (author)

Evaluation of Reading, Writing, and Watching TV Using the Dutch ICF Activity Inventory

NARCIS (Netherlands)

Bruijning, J.E.; van Rens, G.H.M.B.; Knol, D.L.; van Nispen, R.M.A.

2014-01-01

PURPOSE: To investigate the longitudinal outcomes of rehabilitation (from baseline to 4 and 12 months) at a multidisciplinary rehabilitation center. The three goals (“Reading,” “Writing,” and “Watching TV”) were measured with the Dutch ICF Activity Inventory (D-AI). In addition, outcomes were

Conceptual design of an angular multiplexed 50 kJ KrF amplifier for ICF

International Nuclear Information System (INIS)

Lowenthal, D.D.; Ewing, J.J.; Center, R.E.; Mumola, P.; Olson, T.

1981-01-01

The results of a conceptual design for an angular multiplexed 50 kJ KrF amplifier for ICF are presented. Optical designs, amplifier scaling with a KrF kinetics code and limitations imposed by pulsed power technology are described

Inference of ICF Implosion Core Mix using Experimental Data and Theoretical Mix Modeling

International Nuclear Information System (INIS)

Welser-Sherrill, L.; Haynes, D.A.; Mancini, R.C.; Cooley, J.H.; Tommasini, R.; Golovkin, I.E.; Sherrill, M.E.; Haan, S.W.

2009-01-01

The mixing between fuel and shell materials in Inertial Confinement Fusion (ICF) implosion cores is a current topic of interest. The goal of this work was to design direct-drive ICF experiments which have varying levels of mix, and subsequently to extract information on mixing directly from the experimental data using spectroscopic techniques. The experimental design was accomplished using hydrodynamic simulations in conjunction with Haan's saturation model, which was used to predict the mix levels of candidate experimental configurations. These theoretical predictions were then compared to the mixing information which was extracted from the experimental data, and it was found that Haan's mix model performed well in predicting trends in the width of the mix layer. With these results, we have contributed to an assessment of the range of validity and predictive capability of the Haan saturation model, as well as increased our confidence in the methods used to extract mixing information from experimental data.

Willow yield is highly dependent on clone and site

DEFF Research Database (Denmark)

Ugilt Larsen, Søren; Jørgensen, Uffe; Lærke, Poul Erik

2014-01-01

Use of high-yielding genotypes is one of the means to achieve high yield and profitability in willow (Salix spp.) short rotation coppice. This study investigated the performance of eight willow clones (Inger, Klara, Linnea, Resolution, Stina, Terra Nova, Tora, Tordis) on five Danish sites......, differing considerably in soil type, climatic conditions and management. Compared to the best clone, the yield was up to 36 % lower for other clones across sites and up to 51 % lower within sites. Tordis was superior to other clones with dry matter yields between 5.2 and 10.2 Mg ha−1 year−1 during the first...... 3-year harvest rotation, and it consistently ranked as the highest yielding clone on four of the five sites and not significantly lower than the highest yielding clone on the fifth site. The ranking of the other clones was more dependent on site with significant interaction between clone and site...

A tool to enhance occupational therapy reasoning from ICF perspective: The Hasselt Occupational Performance Profile (H-OPP).

Science.gov (United States)

Ghysels, R; Vanroye, E; Westhovens, M; Spooren, A

2017-03-01

In order to enhance occupational therapy reasoning in clinical practice, different elements such as client-centred approach, evidence-based care and interdisciplinary work should be taken into account, but is a challenge. To describe the development of the digital Hasselt Occupational Performance Profile (H-OPP © ) that enhances occupational therapy reasoning from ICF perspective. A participative qualitative design was used to create the H-OPP © in an iterative way in which occupational therapy lectures, ICF experts, students and occupational therapists in the field were involved. After linking occupational therapy terminology to the ICF, different stages of the H-OPP were identified and elaborated with main features: generating an occupational performance profile based on inventarization of problems and possibilities, formulating an occupational performance diagnosis and enabling to create an intervention plan. In all stages, both the perspectives of the client and the occupational therapist were taken into account. To increase practical use, the tool was further elaborated and digitalized. The H-OPP © is a digital coach that guides and facilitates professional reasoning in (novice) occupational therapists. It augments involvement of the client system. Furthermore, it enhances interdisciplinary communication and evidence-based care.

Disability and Functional Profiles of Patients with Myasthenia Gravis Measured with ICF Classification

Science.gov (United States)

Leonardi, Matilde; Raggi, Alberto; Antozzi, Carlo; Confalonieri, Paolo; Maggi, Lorenzo; Cornelio, Ferdinando; Mantegazza, Renato

2009-01-01

The objective of this study is to describe functional profiles of patients with myasthenia gravis (MG), and the relationships among symptoms, activities and environmental factors (EF), by using WHO's International Classification of Functioning Disability and Health (ICF). Patients were consecutively enrolled at the Besta Institute of Milan, Italy.…

Towards an ICF- and IMMPACT-Based Pain Vocational Rehabilitation Core Set in the Netherlands

NARCIS (Netherlands)

Reneman, M. F.; Beemster, T. T.; Edelaar, M. J. A.; van Velzen, J. M.; van Bennekom, C.; Escorpizo, R.

2013-01-01

Background For clinical use and research of pain within the context of vocational rehabilitation, a specific core set of measurements is needed. The recommendations of the International Classification of Functioning, Disability and Health (ICF) brief Core Set for Vocational Rehabilitation (VR) and

Approaches to achieve high grain yield and high resource use efficiency in rice

Directory of Open Access Journals (Sweden)

Jianchang YANG

2015-06-01

Full Text Available This article discusses approaches to simultaneously increase grain yield and resource use efficiency in rice. Breeding nitrogen efficient cultivars without sacrificing rice yield potential, improving grain fill in later-flowering inferior spikelets and enhancing harvest index are three important approaches to achieving the dual goal of high grain yield and high resource use efficiency. Deeper root distribution and higher leaf photosynthetic N use efficiency at lower N rates could be used as selection criteria to develop N-efficient cultivars. Enhancing sink activity through increasing sugar-spikelet ratio at the heading time and enhancing the conversion efficiency from sucrose to starch though increasing the ratio of abscisic acid to ethylene in grains during grain fill could effectively improve grain fill in inferior spikelets. Several practices, such as post-anthesis controlled soil drying, an alternate wetting and moderate soil drying regime during the whole growing season, and non-flooded straw mulching cultivation, could substantially increase grain yield and water use efficiency, mainly via enhanced remobilization of stored carbon from vegetative tissues to grains and improved harvest index. Further research is needed to understand synergistic interaction between water and N on crop and soil and the mechanism underlying high resource use efficiency in high-yielding rice.

Avaliação da funcionalidade de idosos institucionalizados: relação entre a MIF e a ICF

Directory of Open Access Journals (Sweden)

Tania Cristina Malezan Fleig

2017-06-01

Full Text Available Objetivo: demonstrar através da Medida de Independência Funcional (MIF, as características funcionais de idosos em instituições de longa permanência para idosos (ILPI’s, identificando a possível relação deste instrumento com a Classificação Internacional de Funcionalidade, Incapacidade e Saúde (ICF. Método: trata-se de um estudo transversal, com 55 idosos institucionalizados com idade média de 79,7±10,2 anos. A capacidade funcional foi avaliada através da MIF, sendo os domínios deste instrumento relacionados com as categorias da ICF. Cada idoso foi qualificado, quanto às limitações funcionais conforme a ICF. A análise de dados foi descrita em média, desvio padrão e frequência. Resultados: 72,7% dos idosos eram do sexo feminino, sendo a doença de Alzheimer o diagnóstico mais observado (45,4%. No que diz respeito à capacidade funcional, houve um predomínio de idosos com independência completa (47,3%. Na relação das categorias da ICF, com os domínios do instrumento de avaliação funcional, mostrou-se positiva em todos os itens. Considerações finais: os resultados indicam que os idosos em questão apresentavam independência completa para realizar suas atividades de vida diária. Além disso, a relação do instrumento de avaliação funcional com a ICF possibilitou-nos uma visão ampliada sobre o processo de envelhecimento de uma população de idosos institucionalizados, principalmente no componente Atividade e Participação, podendo ser utilizada como indicadora para o desenvolvimento de estratégias e propostas de intervenções que favoreçam a demanda clínica e pessoal destes idosos.

Z-Pinch Generated X-Rays Demonstrate Indirect-Drive ICF Potential

International Nuclear Information System (INIS)

Bowers, R.L.; Chandler, G.A.; Derzon, M.S.; Hebron, D.E.; Leeper, R.J.; Matzen, M.K.; Mock, R.C.; Nash, T.J.; Olson, R.E.; Peterson, D.L.; Ruggles, L.E.; Sanford, T.W.L.; Simpson, W.W.; Struve, K.W.; Vesey, R.A.

1999-01-01

Hohlraums (measuring 6-mm in diameter by 7-mm in height) have been heated by x-rays from a z-pinch. Over measured x-ray input powers P of 0.7 to 13 TW, the hohlraum radiation temperature T increases from approximately55 to approximately130 eV, and is in agreement with the Planckian relation P-T 4 . The results suggest that indirect-drive ICF studies involving NIF relevant pulse shapes and <2-mm diameter capsules can he studied using this arrangement

Diagnostics and equipment for ion temperatures and implosion neutron yields

International Nuclear Information System (INIS)

Chen Jiabin; Zheng Zhijian; Peng Hansheng; Wen Shuhuai; Zhang Baohan; Ding Yongkun; Qi Lanying; Chen Ming; Li Chaoguang

2001-01-01

Fuel ion temperature is of great importance in the ICF research field. A set of ultra-fast quenched plastic scintillation detector system was fabricated for low yield neutron diagnostic. The detection efficiency and the sensitivity to DT neutrons were scaled using a K-400 accelerator and a pulse neutron tube from Russia with a width 5 - 10 ns, respectively. Its time response functions were calibrated by cosmic ray and implosion neutron separately. Under the conditions of low laser energy so low neutron yield and very limited space, fuel ion temperatures (including implosion neutron yields at the same time) were obtained. The measured ion temperatures for exploding pusher capsules were between 4 keV and 5 keV with errors +-(15 - 25)%. The neutron yields were 5 x 10 8 - 3 x 10 9 for exploding pusher capsules and 1.6 x 10 7 - 3.9 x 10 8 for ablation ones with errors +- (7 - 10)%. Of the six shots of neutron yields calculated, five are in good agreement with authors' experimental results in the range of +- 20%. Not only the heat-conducting mechanism and the effects on implosion of the energy balance of each path of incidence laser, target design, fuel mixture as well as hot electron behavior have been investigated, but also the upgrade level of the laser facility Shengguang II has been tested

Towards comprehensive and transparent reporting: context-specific additions to the ICF taxonomy for medical evaluations of work capacity involving claimants with chronic widespread pain and low back pain.

Science.gov (United States)

Schwegler, Urban; Anner, Jessica; Glässel, Andrea; Brach, Mirjam; De Boer, Wout; Cieza, Alarcos; Trezzini, Bruno

2014-08-29

Medical evaluations of work capacity provide key information for decisions on a claimant's eligibility for disability benefits. In recent years, the evaluations have been increasingly criticized for low transparency and poor standardization. The International Classification of Functioning, Disability and Health (ICF) provides a comprehensive spectrum of categories for reporting functioning and its determinants in terms of impairments and contextual factors and could facilitate transparent and standardized documentation of medical evaluations of work capacity. However, the comprehensiveness of the ICF taxonomy in this particular context has not been empirically examined. In this study, we wanted to identify potential context-specific additions to the ICF for its application in medical evaluations of work capacity involving chronic widespread pain (CWP) and low back pain (LBP). A retrospective content analysis of Swiss medical reports was conducted by using the ICF for data coding. Concepts not appropriately classifiable with ICF categories were labeled as specification categories (i.e. context-specific additions) and were assigned to predefined specification areas (i.e. precision, coverage, personal factors, and broad concepts). Relevant specification categories for medical evaluations of work capacity involving CWP and LBP were determined by calculating their relative frequency across reports and setting a relevance threshold. Forty-three specification categories for CWP and fifty-two for LBP reports passed the threshold. In both groups of reports, precision was the most frequent specification area, followed by personal factors. The ICF taxonomy represents a universally applicable standard for reporting health and functioning information. However, when applying the ICF for comprehensive and transparent reporting in medical evaluations of work capacity involving CWP and LBP context-specific additions are needed. This is particularly true for the documentation of

The Edward Teller medal lecture: The evolution toward Indirect Drive and two decades of progress toward ICF ignition and burn

International Nuclear Information System (INIS)

Lindl, J.D.

1993-12-01

In 1972, I joined the Livermore ICF Theory and Target Design group led by John Nuckolls, shortly after publication of John's seminal Nature article on ICF. My primary role, working with others in the target design program including Mordy Rosen, Steve Haan, and Larry Suter, has been as a target designer and theorist who utilized the LASNEX code to perform numerical experiments, which along with analysis of laboratory and underground thermonuclear experiments allowed me to develop a series of models and physical insights which have been used to set the direction and priorities of the Livermore program. I have had the good fortune of working with an outstanding team of scientists who have established LLNL as the premier ICF laboratory in the world. John Emmett and the LLNL Laser Science team were responsible for developing a series of lasers from Janus to Nova which have given LLNL unequaled facilities. George Zimmerman and the LASNEX group developed the numerical models essential for projecting future performance and requirements as well as for designing and analyzing the experiments. Bill Kruer, Bruce Langdon and others in the plasma theory group developed the fundamental understanding of laser plasma interactions which have played such an important role in ICF. And a series of experiment program leaders including Mike Campbell and Joe Kilkenny and their laser experimental teams developed the experimental techniques and diagnostic capabilities which have allowed us to c increasingly complex and sophisticated experiments

The Edward Teller medal lecture: The evolution toward Indirect Drive and two decades of progress toward ICF ignition and burn

Energy Technology Data Exchange (ETDEWEB)

Lindl, J.D.

1993-12-01

In 1972, I joined the Livermore ICF Theory and Target Design group led by John Nuckolls, shortly after publication of John`s seminal Nature article on ICF. My primary role, working with others in the target design program including Mordy Rosen, Steve Haan, and Larry Suter, has been as a target designer and theorist who utilized the LASNEX code to perform numerical experiments, which along with analysis of laboratory and underground thermonuclear experiments allowed me to develop a series of models and physical insights which have been used to set the direction and priorities of the Livermore program. I have had the good fortune of working with an outstanding team of scientists who have established LLNL as the premier ICF laboratory in the world. John Emmett and the LLNL Laser Science team were responsible for developing a series of lasers from Janus to Nova which have given LLNL unequaled facilities. George Zimmerman and the LASNEX group developed the numerical models essential for projecting future performance and requirements as well as for designing and analyzing the experiments. Bill Kruer, Bruce Langdon and others in the plasma theory group developed the fundamental understanding of laser plasma interactions which have played such an important role in ICF. And a series of experiment program leaders including Mike Campbell and Joe Kilkenny and their laser experimental teams developed the experimental techniques and diagnostic capabilities which have allowed us to c increasingly complex and sophisticated experiments.

Using the ICF in economic analyses of Assistive Technology systems: methodological implications of a user standpoint.

Science.gov (United States)

Schraner, Ingrid; De Jonge, Desleigh; Layton, Natasha; Bringolf, Jane; Molenda, Agata

2008-01-01

This paper identifies key methodological issues for economic analyses of costs and effectiveness of Assistive Technology (AT) systems based on the International Classification of Functioning, Disability and Health (ICF). Following the biopsychosocial model of the ICF, the paper explores the consequences for cost-effectiveness analyses of AT systems when a user centred approach is taken. In so doing, the paper questions the fiction of neutrality in economic analyses and discusses the distinction between weak and strong objectivity. Costs are measured as all resources used when providing a particular level of environmental facilitators and reducing environmental barriers for an AT user, while effectiveness is measured in terms of the resulting increase in activities and participation of the AT user. The ICF's fourth qualifier for activities and participation, which denotes performance without assistance is used to identify the additional performance achieved due to the particular environmental factors in the current situation (first qualifier). A fifth qualifier for activities and participation is introduced to denote performance with optimal assistance, and the fourth qualifier is then again used to identify the increase in activities and participation due to the environmental factors in the situation with optimal assistance. The effectiveness that an AT user achieves in his or her current situation can be compared with the effectiveness he or she could achieve when provided with what is considered an optimal AT system based on current technologies and user priorities. This comparison throws into sharp relief the role of AT systems as well as of universal design (UD) in reducing environmental barriers for AT users in a way that is cost-effective for society as a whole. Cost-effectiveness analysis based on the ICF can provide powerful economic evidence for how best to allocate existing funding for AT systems. We can identify three particular scenarios in which clear

A Conceptual Definition of Vocational Rehabilitation Based on the ICF : building a shared global model

NARCIS (Netherlands)

Escorpizo, Reuben; Reneman, Michiel F.; Ekholm, Jan; Fritz, Julie; Krupa, Terry; Marnetoft, Sven-Uno; Maroun, Claude E.; Guzman, Julietta Rodriguez; Suzuki, Yoshiko; Stucki, Gerold; Chan, Chetwyn C. H.

Background The International Classification of Functioning, Disability and Health (ICF) is a conceptual framework and classification system by the World Health Organization (WHO) to understand functioning. The objective of this discussion paper is to offer a conceptual definition for vocational

Z-Pinch Generated X-Rays Demonstrate Indirect-Drive ICF Potential

Energy Technology Data Exchange (ETDEWEB)

Bowers, R.L.; Chandler, G.A.; Derzon, M.S.; Hebron, D.E.; Leeper, R.J.; Matzen, M.K.; Mock, R.C.; Nash, T.J.; Olson, R.E.; Peterson, D.L.; Ruggles, L.E.; Sanford, T.W.L.; Simpson, W.W.; Struve, K.W.; Vesey, R.A.

1999-06-16

Hohlraums (measuring 6-mm in diameter by 7-mm in height) have been heated by x-rays from a z-pinch. Over measured x-ray input powers P of 0.7 to 13 TW, the hohlraum radiation temperature T increases from {approximately}55 to {approximately}130 eV, and is in agreement with the Planckian relation P-T{sup 4}. The results suggest that indirect-drive ICF studies involving NIF relevant pulse shapes and <2-mm diameter capsules can he studied using this arrangement.

The Disabilities of the Arm, Shoulder and Hand Questionnaire (DASH can measure the impairment, activity limitations and participation restriction constructs from the International Classification of Functioning, Disability and Health (ICF

Directory of Open Access Journals (Sweden)

McQueen Margaret

2008-08-01

Full Text Available Abstract Background The International Classification of Functioning, Disability and Health (ICF model of the consequences of disease identifies three health outcomes, impairment, activity limitations and participation restrictions. However, few orthopaedic health outcome measures were developed with reference to the ICF. This study examined the ability of a valid and frequently used measure of upper limb function, namely the Disabilities of the Arm, Shoulder and Hand Questionnaire (DASH, to operationalise the ICF. Methods Twenty-four judges used the method of Discriminant Content Validation to allocate the 38 items of the DASH to the theoretical definition of one or more ICF outcome. One-sample t-tests classified each item as measuring, impairment, activity limitations, participation restrictions, or a combination thereof. Results The DASH contains items able to measure each of the three ICF outcomes with discriminant validity. The DASH contains five pure impairment items, 19 pure activity limitations items and three participation restriction items. In addition, seven items measured both activity limitations and participation restrictions. Conclusion The DASH can measure the three health outcomes identified by the ICF. Consequently the DASH could be used to examine the impact of trauma and subsequent interventions on each health outcome in the absence of measurement confound.

Monte Carlo Methods in ICF (LIRPP Vol. 13)

Science.gov (United States)

Zimmerman, George B.

2016-10-01

Monte Carlo methods appropriate to simulate the transport of x-rays, neutrons, ions and electrons in Inertial Confinement Fusion targets are described and analyzed. The Implicit Monte Carlo method of x-ray transport handles symmetry within indirect drive ICF hohlraums well, but can be improved SOX in efficiency by angular biasing the x-rays towards the fuel capsule. Accurate simulation of thermonuclear burn and burn diagnostics involves detailed particle source spectra, charged particle ranges, inflight reaction kinematics, corrections for bulk and thermal Doppler effects and variance reduction to obtain adequate statistics for rare events. It is found that the effects of angular Coulomb scattering must be included in models of charged particle transport through heterogeneous materials.

The Danish version of Lymphoedema Functioning, Disability and Health Questionnaire (Lymph-ICF) for breast cancer survivors

DEFF Research Database (Denmark)

Grarup, Karin R; Devoogdt, Nele; Strand, Liv Inger

2018-01-01

PURPOSE: To translate and culturally adapt the Lymphoedema Functioning, Disability and Health Questionnaire (Lymph-ICF) for breast cancer survivors with arm lymphedema into Danish and examine its content validity and reliability. METHODS: (1) Translation and cultural adaptation was performed in 10...... steps following international guidelines (International Society for Pharmacoeconomics and Outcome Research); (2) cognitive interviewing (step 7) was conducted in 15 women with breast cancer related arm lymphedema to explore understandability, interpretation, and cultural relevance; (3) after adjustments...... for the domains ranged from 0.84 to 0.94. SEM values differed for the domains, 6.4 (physical function), 5.7 (mobility activities), 7.09 (life and social activities), 9.1 (mental functions), and 10.2 (household activities). CONCLUSION: The translated and adjusted Lymph-ICF DK (Denmark) is reliable and valid...

Preparation of germanium doped plasma polymerized coatings as ICF target ablators

International Nuclear Information System (INIS)

Brusasco, R.M.; Saculla, M.D.; Cook, R.C.

1994-01-01

Targets for Inertial Confinement Fusion (ICF) experiments at the Lawrence Livermore National Laboratory (LLNL) utilize an organic (CH) ablator coating prepared by plasma polymerization. Some of these experiments require a mid-Z dopant in the ablator coating to modify the opacity of the shell. Bromine had been used in the past, but the surface finish of brominated CH degrades rapidly with time upon exposure to air. This paper describes the preparation and characterization of plasma polymer layers containing germanium as a dopant at concentrations of between 1.25 and 2.25 atom percent. The coatings are stable in air and have an rms surface roughness of 7--9 nm (modes 10--1,000) which is similar to that obtained with undoped coatings. High levels of dopant result in cracking of the inner mandrel during target assembly. Possible explanations for the observed cracking behavior will be discussed

Induction of high yielding and high protein containing chickpea mutant variety through gamma radiation

International Nuclear Information System (INIS)

Hassan, S.; Javed, M.A.; Khan, A.J.; Tariq, M.

1997-01-01

Pure seeds of a blight susceptible but high yielding chickpea variety 6153 were irradiated at 20 Kr(0.2 kGy) dose of gamma radiation and the mutant line CMN-446-4 was selected in M3 generation on the basis of high yield and disease resistance. After confirmation of its resistance to blight in M4 and M5, the mutant line CMN-446-4 along with other promising chickpea mutants were evaluated in various yield trials at different locations. The mutant line CMN-446-4 was got evaluated in chickpea national uniform yield trial conducted over two locations in the country during 1993-94. The mutant line, on average, ranked 3rd by producing significantly higher yield of 1528 kg/ha as compared to the two checked varieties Punjab-91 and Paidar-91 which yielded 1316 and 1391 kg/ha respectively. The mutant CMN-446-4 has significantly greater percentage of protein content (25.22%) compared to its parental variety having (20.12%). (author)

[Study on High-yield Cultivation Measures for Arctii Fructus].

Science.gov (United States)

Liu, Shi-yong; Jiang, Xiao-bo; Wang, Tao; Sun, Ji-ye; Hu, Shang-qin; Zhang, Li

2015-02-01

To find out the high yield cultivation measures for Arctii Fructus. Completely randomized block experiment design method was used in the field planting, to analyze the effect of different cultivation way on agronomic characters, phenological phase,quality and quantity of Arctii Fructus. Arctium lappa planted on August 28 had the best results of plant height, thousand seeds weight and yield. The highest yield of Arctii Fructus was got at the density of 1,482 plants/667 m2. Arctiin content was in an increase trend with the planting time delay and planting density increasing. The plant height, thousand seeds weight, yield and arctiin content by split application of fertilizer were significantly higher than that by one-time fertilization. Compared with open field Arctium lappa, plant height, yield, arctiin content and relative water content of plastic film mulching Arctium lappa was higher by 7.74%, 10.87%, 6.38% and 24.20%, respectively. In the topping Arctium lappa, the yield was increased by 11.09%, with 39. 89% less branching number. Early planting time and topping shortened the growth cycle of Arctium lappa plant. The high-yield cultivation measures of Arctii Fructus are: around August 28 to sowing, planting density of 1 482 plants/667 m2, split application of fertilizer for four times, covering film on surface of the soil and topping in bolting.

Physics issues related to the confinement of ICF experiments in the US National Ignition Facility

International Nuclear Information System (INIS)

Tobin, M.; Anderson, A.; Latkowski, J.

1995-04-01

ICF experiments planned for the proposed US National Ignition Facility (NIF) will produce emissions of neutrons, x rays, debris, and shrapnel. The NIF Target Area (TA) must acceptably confine these emissions and respond to their effects to allow an efficient rate of experiments, from 600 to possibly 1500 per year, and minimal down time for maintenance. Detailed computer code predictions of emissions are necessary to study their effects and impacts on Target Area operations. Preliminary results show that the rate of debris shield transmission loss (and subsequent periodicity of change-out) due to ablated material deposition is acceptable, neutron effects on optics are manageable, and preliminary safety analyses show a facility rating of low hazard, non-nuclear. Therefore, NIF Target Area design features such as fused silica debris shields, refractory first wall coating, and concrete shielding are effective solutions to confinement of ICF experiment emissions

Dissipation terms in one-dimensional hydrodynamic code for ICF target

International Nuclear Information System (INIS)

Tamba, Moritake; Niu, Keishiro.

1985-01-01

The one-dimensional hydrodynamic code so far used for the simulation of the target improsion in ICF, the artificial viscosity has been employed as the dissipation terms. This artificial viscosity depends on the mesh width of the space using in the simulation and is much large in comparison with the real viscosity. In this paper, it is shown that this artificial viscosity leads to the unreasonable fusion parameters depending on the used mesh width of the space. Several methods to modify the dissipation term are given in this paper. (author)

Coherent structures in ablatively compressed ICF targets and Rayleigh-Taylor instability

International Nuclear Information System (INIS)

Pant, H.C.; Desai, T.

1996-01-01

One of the major issues in laser induced inertial confinement fusion (ICF) is a stable ablative compression of spherical fusion pellets. The main impediment in achievement of this objective is Rayleigh-Taylor instability at the pellet's ablation front. Under sufficiently high acceleration this instability can grow out of noise. However, it can also arise either due to non-uniform laser intensity distribution over the pellet surface or due to pellet wall areal mass irregularity. Coherent structures in the dense target behind the ablation front can be effectively utilised for stabilisation of the Rayleigh-Taylor phenomenon. Such coherent structures in the form of a super lattice can be created by doping the pellet pusher with high atomic number (Z) micro particles. A compressed-cool pusher under laser irradiation behaves like a strongly correlated non ideal plasma when compressed to sufficiently high density such that the non ideality parameter exceeds unity. Moreover, the nonideality parameter for high Z microinclusions may exceed a critical value of 180 and as a consequence they remain in the form of intact clusters, maintaining the superlattice intact during ablative acceleration. Micro-hetrogeneity and its superlattice plays an important role in stabilization of Rayleigh-Taylor instability, through a variety of mechanisms. (orig.)

Precise focusing and diagnosis technology for laser beams in ICF target chamber

International Nuclear Information System (INIS)

Zhu Qixiang

1999-01-01

The precise focusing and diagnosis experimental system for laser beams in ICF target chamber is introduced. The system is controlled by computer. In process of focusing a series data of displacement in axial direction and relative area of focus spots are acquired. According to the functional curvature the accurate position of focal plane is determined. The construction of the system is simple, the system is controlled conveniently and runs quickly

Effects of hippotherapy on body functions, activities and participation in children with cerebral palsy based on ICF-CY assessments.

Science.gov (United States)

Hsieh, Yueh-Ling; Yang, Chen-Chia; Sun, Shih-Heng; Chan, Shu-Ya; Wang, Tze-Hsuan; Luo, Hong-Ji

2017-08-01

To evaluate the effects of hippotherapy on body functions, activities, and participation in children with CP of various functional levels by using the International Classification of Functioning, Disability and Health-Children and Youth (ICF-CY) checklist. Fourteen children with cerebral palsy (CP) (3-8 years of age) were recruited for a 36-week study composed of baseline, intervention, and withdrawal phases (12 weeks for each phase, ABA design). Hippotherapy was implemented for 30 min once weekly for 12 consecutive weeks during the intervention phase. Body Functions (b) and Activities and Participation (d) components of the ICF-CY checklist were used as outcome measures at the initial interview and at the end of each phase. Over the 12 weeks of hippotherapy, significant improvements in ICF-CY qualifiers were found in neuromusculoskeletal and movement-related functions (b7), mobility (d4) and major life areas (d8) and, in particular, mobility of joint functions (b710), muscle tone functions (b735), involuntary movement reaction functions (b755), involuntary movement functions (b765), and play (d811) (all p hippotherapy on body functions, activities, and participation in children with CP. Implications for Rehabilitation ICF-CY provides a comprehensive overview of functioning and disability and constitutes a universal language for identifying the benefits of hippotherapy in areas of functioning and disability in children with CP. In children with CP, hippotherapy encourages a more complementary approach that extends beyond their impairments and limitations in body functions, activities, and participation. The effect of hippotherapy was distinct from GMFCS levels and the majority of improvements were present in children with GMFCS levels I-III.

Comparison of subjective and objective assessments of outcome after traumatic brain injury using the International Classification of Functioning, Disability and Health (ICF).

Science.gov (United States)

Koskinen, Sanna; Hokkinen, Eeva-Maija; Wilson, Lindsay; Sarajuuri, Jaana; Von Steinbüchel, Nicole; Truelle, Jean-Luc

2011-01-01

The aim is to examine two aspects of outcome after traumatic brain injury (TBI). Functional outcome was assessed by the Glasgow Outcome Scale - Extended (GOSE) and by clinician ratings, while health-related quality of life (HRQoL) was assessed by the Quality of Life after Brain Injury (QOLIBRI). The GOSE and the QOLIBRI were linked to the International Classification of Functioning, Disability and Health (ICF) to analyse their content. Functional outcome on ICF categories was assessed by rehabilitation clinicians in 55 participants with TBI and was compared to the participants' own judgements of their HRQoL. The QOLIBRI was linked to 42 and the GOSE to 57 two-level ICF categories covering 78% of the categories on the ICF brief core set for TBI. The closest agreement in the views of the professionals and the participants was found on the Physical Problems and Cognition scales of the QOLIBRI. The problems encountered after TBI are well covered by the QOLIBRI and the GOSE. They capture important domains that are not traditionally sufficiently documented, especially in the domains of interpersonal relationships, social and leisure activities, self and the environment. The findings indicate that they are useful and complementary outcome measures for TBI. In rehabilitation, they can serve as tools in assessment, setting meaningful goals and creating therapeutic alliance.

Numerical Simulation of Doped Targets for ICF

Science.gov (United States)

Phillips, Lee; Gardner, John H.; Bodner, Stephen E.; Colombant, Denis; Klapisch, Marcel; Bar-Shalom, Avraham

1997-11-01

The ablative Rayleigh-Taylor (RT) instability can be reduced by preheating the ablator, thereby reducing the peak density and increasing the mass ablation velocity. The ablator can be preheated with radiation from higher Z dopants.(Gardner, J.H., Bodner, S.E., Dahlburg, J.P., Phys. Fluids 3), 1070 (1991) Dopants also reduce the density gradient at the ablator, which provides a second mechanism to reduce the RT growth rate. We have recently developed a more sophisticated and detailed radiation package that uses opacities generated by an STA code, with non-LTE radiation transport based on the Busquet method. This radiation package has been incorporated into NRL's FAST2D radiation hydrodynamics code, which has been used to evaluate and optimize the use of various dopants that can provide interesting levels of preheat for an ICF target.

Evolution of disability in traffic accident victims in rehabilitation, characterized by the International Classification of Functioning, Disability and Health (ICF

Directory of Open Access Journals (Sweden)

Ligia Regina de Oliveira

Full Text Available Abstract Introduction: The International Classification of Functioning, Disability and Health (ICF enables monitoring of the clinical evolution of a patient. Objective: This study aimed to characterize the evolution of disabilities in patients undergoing physical therapy following traffic accidents, using the ICF. Methods: A longitudinal study of 53 accident victims was conducted between April and October 2010, in a rehabilitation unit in the capital of Mato Grosso State, Brazil. Data from physical therapy evaluation were collected in 2 stages and coded by the ICF. Results: The average time between evaluation and reevaluation was 73.4 days. The evolution of functional impairment demonstrated a reduction in the number of patients with deficits, except for muscle tone functions. On initial evaluation, 90.6% had difficulty with sensory functions and pain, varying from mild to complete, decreasing to 67.9% on reevaluation, with pain still mostly present. Almost all patients (96.2% had a disability of neuromusculoskeletal and movement related functions on initial assessment, with a decrease to 15.7% of patients on reevaluation. The greatest improvements were observed in the categories of muscle strength (36.7% and gait pattern (30.6%. On reevaluation, improvement was also observed regarding perceived impairment of body structures, especially for those with severe and complete disability. Conclusion: The study confirmed a reduction in the percentage of patients with some form of disability, and positive development in functional capacity. The use of ICF enabled evaluation of physical disabilities and monitoring of the evolution of patients undergoing physical therapy.

Analyses in support of the Laboratory Microfusion Facility and ICF commercial reactor designs

International Nuclear Information System (INIS)

Meier, W.R.; Monsler, M.J.

1988-01-01

Our work on this contract was divided into two major categories; two thirds of the total effort was in support of the Laboratory Microfusion Facility (LMF), and one third of the effort was in support of Inertial Confinement Fusion (ICF) commercial reactors. This final report includes copies of the formal reports, memoranda, and viewgraph presentations that were completed under this contract

Empirical assessment of the detection efficiency of CR-39 at high proton fluence and a compact, proton detector for high-fluence applications

Energy Technology Data Exchange (ETDEWEB)

Rosenberg, M. J., E-mail: mrosenbe@mit.edu; Séguin, F. H.; Waugh, C. J.; Rinderknecht, H. G.; Orozco, D.; Frenje, J. A.; Johnson, M. Gatu; Sio, H.; Zylstra, A. B.; Sinenian, N.; Li, C. K.; Petrasso, R. D. [Plasma Science and Fusion Center, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States); Glebov, V. Yu.; Stoeckl, C.; Hohenberger, M.; Sangster, T. C. [Laboratory for Laser Energetics, University of Rochester, Rochester, New York 14623 (United States); LePape, S.; Mackinnon, A. J.; Bionta, R. M.; Landen, O. L. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States); and others

2014-04-15

CR-39 solid-state nuclear track detectors are widely used in physics and in many inertial confinement fusion (ICF) experiments, and under ideal conditions these detectors have 100% detection efficiency for ∼0.5–8 MeV protons. When the fluence of incident particles becomes too high, overlap of particle tracks leads to under-counting at typical processing conditions (5 h etch in 6N NaOH at 80 °C). Short etch times required to avoid overlap can cause under-counting as well, as tracks are not fully developed. Experiments have determined the minimum etch times for 100% detection of 1.7–4.3-MeV protons and established that for 2.4-MeV protons, relevant for detection of DD protons, the maximum fluence that can be detected using normal processing techniques is ≲3 × 10{sup 6} cm{sup −2}. A CR-39-based proton detector has been developed to mitigate issues related to high particle fluences on ICF facilities. Using a pinhole and scattering foil several mm in front of the CR-39, proton fluences at the CR-39 are reduced by more than a factor of ∼50, increasing the operating yield upper limit by a comparable amount.

The Edward Teller Medal Lecture: the Evolution Toward Indirect Drive and Two Decades of Progress Toward Icf Ignition and Burn

Science.gov (United States)

Lindl, John D.

In 1972, I joined the Livermore ICF Theory and Target Design group led by John Nuckolls, shortly after publication of John's seminal Nature article on ICF. My primary role, working with others in the target design program including Mordy Rosen, Steve Haan, and Larry Suter, has been as a target designer and theorist who utilized the LASNEX code to perform numerical experiments, which along with analysis of laboratory and underground thermonuclear experiments allowed me to develop a series of models and physical insights which have been used to set the direction and priorities of the Livermore program.

Neutron emission and fragment yield in high-energy fission

International Nuclear Information System (INIS)

Grudzevich, O. T.; Klinov, D. A.

2013-01-01

The KRIS special library of spectra and emission probabilities in the decays of 1500 nuclei excited up to energies between 150 and 250 MeV was developed for correctly taking into account the decay of highly excited nuclei appearing as fission fragments. The emission of neutrons, protons, and photons was taken into account. Neutron emission fromprimary fragments was found to have a substantial effect on the formation of yields of postneutron nuclei. The library was tested by comparing the calculated and measured yields of products originating from the fission of nuclei that was induced by high-energy protons. The method for calculating these yields was tested on the basis of experimental data on the thermal-neutroninduced fission of 235 U nuclei

A self-similar isochoric implosion for fast ignition

International Nuclear Information System (INIS)

Clark, D.S.; Tabak, M.

2007-01-01

Various gain models have shown the potentially great advantages of fast ignition (FI) inertial confinement fusion (ICF) over its conventional hot spot ignition counterpart (e.g. Atzeni S. 1999 Phys. Plasmas 6 3316; Tabak M. et al 2006 Fusion Sci. Technol. 49 254). These gain models, however, all assume nearly uniform density fuel assemblies. In contrast, conventional ICF implosions yield hollowed fuel assemblies with a high-density shell of fuel surrounding a low-density, high-pressure hot spot. Hence, to realize fully the advantages of FI, an alternative implosion design must be found which yields nearly isochoric fuel assemblies without substantial hot spots. Here, it is shown that a self-similar spherical implosion of the type originally studied by Guderley (1942 Luftfahrtforschung 19 302) may be employed to yield precisely such quasi-isochoric imploded states. The difficulty remains, however, of accessing these self-similarly imploding configurations from initial conditions representing an actual ICF target, namely a uniform, solid-density shell at rest. Furthermore, these specialized implosions must be realized for practicable drive parameters and at the scales and energies of interest in ICF. A direct-drive implosion scheme is presented which meets all of these requirements and reaches a nearly isochoric assembled density of 300 g cm -3 and areal density of 2.4 g cm -2 using 485 kJ of laser energy

Isochoric Implosions for Fast Ignition

International Nuclear Information System (INIS)

Clark, D S; Tabak, M

2007-01-01

Various gain models have shown the potentially great advantages of Fast Ignition (FI) Inertial Confinement Fusion (ICF) over its conventional hot spot ignition counterpart [e.g., S. Atzeni, Phys. Plasmas 6, 3316 (1999); M. Tabak et al., Fusion Sci. and Technology 49, 254 (2006)]. These gain models, however, all assume nearly uniform-density fuel assemblies. In contrast, conventional ICF implosions yield hollowed fuel assemblies with a high-density shell of fuel surrounding a low-density, high-pressure hot spot. Hence, to realize fully the advantages of FI, an alternative implosion design must be found which yields nearly isochoric fuel assemblies without substantial hot spots. Here, it is shown that a self-similar spherical implosion of the type originally studied by Guderley [Luftfahrtforschung 19, 302 (1942)] may be employed to yield precisely such quasi-isochoric imploded states. The difficulty remains, however, of accessing these self-similarly imploding configurations from initial conditions representing an actual ICF target, namely a uniform, solid-density shell at rest. Furthermore, these specialized implosions must be realized for practicable drive parameters and at the scales and energies of interest in ICF. A direct-drive implosion scheme is presented which meets all of these requirements and reaches a nearly isochoric assembled density of 300 g=cm 3 and areal density of 2.4 g=cm 2 using 485 kJ of laser energy

Hybrid Monte-Carlo method for ICF calculations

International Nuclear Information System (INIS)

Clouet, J.F.; Samba, G.

2003-01-01

Numerical simulation of Inertial Confinement Fusion targets in indirect drive requires an accurate description of the radiation transport flow. Laser energy is first converted to X-ray in the gold wall and then transferred to the fusion target through an hohlraum filled with gas. The emissive region is moving in the gold wall which is rapidly expanding into the hohlraum so that the resolution of the radiative transfer equations has to be coupled with hydrodynamic motion. Scientific computing is actually the only tool for an accurate design of ICF targets: one of the difficulties is to compute the non-isotropic irradiation on the capsule and to control them by an appropriate balance between the energy of the different laser beams. Hence an approximate description of radiation transport is not relevant and a transport method has to be chosen. On the other hand transport methods are known to be more or less inefficient in optically thick regions: for instance in the gold wall before it is sufficiently heated and ablated to become optically thin. In these regions, diffusion approximation of the transfer equations is an accurate description of the physical phenomenon; moreover it is much more cheaper to solve numerically than the full transport equations. This is why we developed an hybrid method for radiation transport where the lower part of the energy spectrum is treated in the diffusion approximation whereas the higher part is treated by a transport method. We introduced the notion of spectral cut-off to describe this separation between the two descriptions. The method is dynamic in the sense that the spectral cut-off evolves with time and space localization. The method has been introduced in our ICF code FCl2: this is a 2D radiation hydrodynamics code in cylindrical geometry which has been used for several years at the CEA for laser studies. It is a Lagrangian code with Arbitrary Lagrangian Eulerian capabilities, flux-limited thermal (electronic and ionic

Towards an ICF- and IMMPACT-based pain vocational rehabilitation core set in the Netherlands.

Science.gov (United States)

Reneman, M F; Beemster, T T; Edelaar, M J A; van Velzen, J M; van Bennekom, C; Escorpizo, R

2013-12-01

For clinical use and research of pain within the context of vocational rehabilitation, a specific core set of measurements is needed. The recommendations of the International Classification of Functioning, Disability and Health (ICF) brief Core Set for Vocational Rehabilitation (VR) and those of Initiative on Methods, Measurement, and Pain Assessment in Clinical Trials (IMMPACT) cover two broad areas. These two sources can be integrated when made applicable to vocational rehabilitation and pain. Objective To develop a core set of diagnostic and evaluative measures specifically for vocational rehabilitation of patients with subacute and chronic musculoskeletal pain, while using the brief ICF core set for VR as the reference framework in VR, and the IMMPACT recommendations in the outcome measurements around pain. Three main steps were taken. The first step was to remove irrelevant and duplicate domains of the brief ICF Core Set for Vocational Rehabilitation and the IMMPACT recommendations around pain. The second step was to match the remaining domains with existing instruments or measures. Instruments were proposed based on availability and its proven use in Dutch practice and based on proof of sufficient clinimetric properties. In step 3, the preliminary VR-Pain core set was presented to 3 expert panels: proposed users, Dutch pain rehabilitation experts, and international VR experts. Experts agreed with the majority of the proposed domains and instruments. The final VR-Pain Core Set consists of 18 domains measured with 12 instruments. All instruments possessed basic clinimetric properties. An agreed-upon VR-Pain Core Set with content that covers relevant domains for pain and VR and validated instruments measuring these domains has been developed. The VR-Pain Core Set may be used for regular clinical purposes and research in the field of vocational rehabilitation and pain, but adaptations should be considered for use outside the Netherlands.

Implementation of the international classification of functioning, disability and health (ICF) in the Portuguese educational system: Attitudes and training needs of special education teachers’.

OpenAIRE

Saragoça, M.; Candeias, A. A.; Rosário, A.

2013-01-01

Since 2008, the International Classification of Functioning, Disability and Health - ICF (WHO, 2001) is the framework of reference in the assessment and intervention process with students with SEN, in the Portuguese educational system. As a consequence special education teachers’ training needs emerged from it. In this study, we characterize the received training and the special education teachers’ attitudes and training needs towards ICF. The sample consisted of 913 Portuguese special educat...

Self-Generated Magnetic Fields in Stagnation-Phase ICF Implosions

Science.gov (United States)

Walsh, Christopher; Chittenden, Jeremy; McGlinchey, Kristopher; Niasse, Nicolas

2016-10-01

3-D extended-MHD simulations of the stagnation phase of an ICF implosion are presented, showing significant self-generated magnetic fields (1000-5000T) due to the Biermann Battery effect. Perturbed hot-spots generate magnetic fields at their edges, as the extremities of hot bubbles are rapidly cooled by the surrounding low temperature fuel, giving non-parallel electron pressure and density gradients. Larger amplitude and higher mode-number perturbations lead to an increased hot-spot surface area and more heat flow, developing greater non-parallel gradients and therefore larger magnetic fields. Due to this, largely perturbed hot-spots can be affected more by magnetic fields, although the accelerated cooling associated with greater deviations from symmetry lowers magnetisation. The Nernst effect advects magnetic field down temperature gradients towards the outer region of the hot-spot, which can also lower the magnetisation of the plasma. In some regions, however, the Nernst velocity is convergent, magnetising the tips of cold fuel spikes, resulting in anisotropic heat-flow and an improvement in energy containment. Low-mode and multi-high-mode simulations are shown, with magnetisations reaching sufficiently high levels in some regions of the hot-spot to suppress thermal conduction to lower than 50% of the unmagnetised case. A quantitative analysis of how this affects the hot-spot energy balance is included.

Can the ICF osteoarthritis core set represent a future clinical tool in measuring functioning in persons with osteoarthritis undergoing hip and knee joint replacement?

Science.gov (United States)

Alviar, Maria Jenelyn; Olver, John; Pallant, Julie F; Brand, Caroline; de Steiger, Richard; Pirpiris, Marinis; Bucknill, Andrew; Khan, Fary

2012-11-01

To determine the dimensionality, reliability, model fit, adequacy of the qualifier levels, response patterns across different factors, and targeting of the International Classification of Functioning, Disability and Health (ICF) osteoarthritis core set categories in people with osteoarthritis undergoing hip and knee arthroplasty. The osteoarthritis core set was rated in 316 persons with osteoarthritis who were either in the pre-operative or within one year post-operative stage. Rasch analyses were performed using the RUMM 2030 program. Twelve of the 13 body functions categories and 13 of the 19 activity and participation categories had good model fit. The qualifiers displayed disordered thresholds necessitating rescoring. There was uneven spread of ICF categories across the full range of the patients' scores indicating off--targeting. Subtest analysis of the reduced ICF categories of body functions and activity and participation showed that the two components could be integrated to form one measure. The results suggest that it is possible to measure functioning using a unidimensional construct based on ICF osteoarthritis core set categories of body functions and activity and participation in this population. However, omission of some categories and reduction in qualifier levels are necessary. Further studies are needed to determine whether better targeting is achieved, particularly during the pre-operative and during the sub-acute care period.

Using the International Classification of Functioning, Disability and Health (ICF) to address facilitators and barriers to participation at work.

Science.gov (United States)

Martins, Anabela Correia

2015-01-01

The International Classification of Functioning, Disability and Health (ICF) was approved by the World Health Assembly in 2001. Ten years later, strong arguments have arisen regarding the added value of ICF to the policies on employment and the outcomes at the workplace. As a conceptual framework, ICF has universality because of its inclusive and comprehensive view of human functioning. At a practical level ICF can be used to quantify the impact of impairment on an individual's ability to act in his/her environment and to assess interventions to minimize the impact of disability and maximize functioning. To explore key indicators of social participation (life habits) of persons with disabilities, particularly related to work, among environmental and personal factors. Data were collected by self-administered questionnaires from a convenience sample of 149 working-age persons with disabilities. Social participation is a construct composed by multiple components and employment domain is the strongest indicator of participation. Correlations between social participation and personal factors, such as self-efficacy and attitudes towards disability were moderate. Those who are employed scored higher quality of life in terms of satisfaction with life, more positive attitudes toward disabilities and higher self-efficacy than the ones who are retired or unemployed. Persons using adapted wheelchair and those who were involved in wheelchair selection scored higher in social participation in general, performance at work, and quality of life. Age and disability duration were not associated with participants' employment status. These findings suggest that rehabilitation and vocational agents, like physiotherapists and other professionals, should have knowledge and understanding of the multiple factors that influence persons with disabilities' participation at work. Programs should provide appropriate wheelchairs, skills training, empowerment and problem-solving strategies in

Environmental and personal factors that support early return-to-work: a qualitative study using the ICF as a framework.

Science.gov (United States)

Hoefsmit, Nicole; Houkes, Inge; Nijhuis, Frans

2014-01-01

Occupational health professionals such as occupational physicians (OPs) increasingly understand that in addition to health improvement, environmental factors (such as work adaptations) and personal factors (such as an employee's attitude towards return-to-work (RTW)) may stimulate employees on sick leave to return to work early. To target their professional interventions more specifically according to these factors, occupational health professionals need further insight into environmental and personal factors that stimulate RTW. The objectives of this study are (1) to identify which and how environmental and personal factors support RTW, and (2) to examine whether the International Classification of Functioning, Disability and Health (ICF) can be used to describe these factors. We performed interviews with 14 employees, 15 employers and 4 OPs from multiple organisations with varying organisational sizes and types of industry such as healthcare and education. We used a qualitative data analysis partially based on the Qualitative Analysis Guide of Leuven. The following environmental factors were found to support early RTW: 'social support from relatives', 'belief that work stimulates health', 'adequate cooperation between stakeholders in RTW' (e.g., employees, employers and OPs) and 'the employers' communicative skills'. One personal factor stimulated RTW: 'positive perception of the working situation' (e.g. enjoyment of work). Most factors stimulated RTW directly. In addition, adequate treatment and social support stimulated medical recovery. Environmental factors can either fully (social support, belief that RTW stimulates health), partially (effective cooperation), or not (employers' communicative skills) be described using ICF codes. The personal factor could not be classified because the ICF does not contain codes for personal factors. RTW interventions should aim at the environmental and personal factors mentioned above. Professionals can use the ICF to

Unique capabilities for ICF and HEDP research with the KrF laser

Science.gov (United States)

Obenschain, Stephen; Bates, Jason; Chan, Lop-Yung; Karasik, Max; Kehne, David; Sethian, John; Serlin, Victor; Weaver, James; Oh, Jaechul; Jenkins, Bruce; Lehmberg, Robert; Hegeler, Frank; Terrell, Stephen; Aglitskiy, Yefim; Schmitt, Andrew

2014-10-01

The krypton-fluoride (KrF) laser provides the shortest wavelength, broadest bandwidth and most uniform target illumination of all developed high-energy lasers. For directly driven targets these characteristics result in higher and more uniform ablation pressures as well as higher intensity thresholds for laser-plasma instability. The ISI beam smoothing scheme implemented on the NRL Nike KrF facility allows easy implementation of focal zooming where the laser radial profile is varied during the laser pulse. The capability for near continuous zooming with KrF would be valuable towards minimizing the effects of cross beam energy transport (CBET) in directly driven capsule implosions. The broad bandwidth ISI beam smoothing that is utilized with the Nike KrF facility may further inhibit certain laser plasma instability. In this presentation we will summarize our current understanding of laser target interaction with the KrF laser and the benefits it provides for ICF and certain HEDP experiments. Status and progress in high-energy KrF laser technology will also be discussed. Work supported by the Deparment of Energy, NNSA.

Optimization of Dithionite Bleaching of High Yield Bagasse Pulp

International Nuclear Information System (INIS)

Mohamed, E.

2005-01-01

High yield bagasse pulp was prepared by soaking bagasse in 10 % cold sodium hydroxide for 24 hours and then refluxing for two hours at 95 degree C. Optimization of dithionite bleaching was attained by investigation of different parameters as consistency, temperature, time and ph. Effect of additives as chelating agent (EDTA) or stabilizing of bleaching solution (Zn compound and hexamethylene tetramine) was considered. The effect of air content was also studied. One and two stages bleaching of the pulp were investigated by using sodium dithionite (D) as a sole bleaching agent or after application of one stage bleaching by hydrogen peroxide to attain high brightness for high yield pulp

Which outcomes are most important to people with aphasia and their families? an international nominal group technique study framed within the ICF.

Science.gov (United States)

Wallace, Sarah J; Worrall, Linda; Rose, Tanya; Le Dorze, Guylaine; Cruice, Madeline; Isaksen, Jytte; Kong, Anthony Pak Hin; Simmons-Mackie, Nina; Scarinci, Nerina; Gauvreau, Christine Alary

2017-07-01

To identify important treatment outcomes from the perspective of people with aphasia and their families using the ICF as a frame of reference. The nominal group technique was used with people with aphasia and their family members in seven countries to identify and rank important treatment outcomes from aphasia rehabilitation. People with aphasia identified outcomes for themselves; and family members identified outcomes for themselves and for the person with aphasia. Outcomes were analysed using qualitative content analysis and ICF linking. A total of 39 people with aphasia and 29 family members participated in one of 16 nominal groups. Inductive qualitative content analysis revealed the following six themes: (1) Improved communication; (2) Increased life participation; (3) Changed attitudes through increased awareness and education about aphasia; (4) Recovered normality; (5) Improved physical and emotional well-being; and (6) Improved health (and support) services. Prioritized outcomes for both participant groups linked to all ICF components; primary activity/participation (39%) and body functions (36%) for people with aphasia, and activity/participation (49%) and environmental factors (28%) for family members. Outcomes prioritized by family members relating to the person with aphasia, primarily linked to body functions (60%). People with aphasia and their families identified treatment outcomes which span all components of the ICF. This has implications for research outcome measurement and clinical service provision which currently focuses on the measurement of body function outcomes. The wide range of desired outcomes generated by both people with aphasia and their family members, highlights the importance of collaborative goal setting within a family-centred approach to rehabilitation. These results will be combined with other stakeholder perspectives to establish a core outcome set for aphasia treatment research. Implications for Rehabilitation Important

Fluidized-bed design for ICF reactor blankets using solid-lithium compounds

International Nuclear Information System (INIS)

Sucov, E.W.; Malick, F.S.; Green, L.; Hall, B.O.

1983-01-01

A fluidized-bed concept for blankets of dry or wetted first-wall ICF reactors using solid-lithium compounds is described. The reaction chamber is a right cylinder, 32 m high and 20 m in diameter; the blanket is composed of 36 steel tanks, 32 m high, which carry the sintered Li 2 O particles in the fluidizing helium gas. Each tank has a radial thickness of 2 m which generates a tritium breeding ration (TBR) of 1.27 and absorbs over 98% of the neutron energy; reducing the thickness to 1.2 m produces a TBR of 1.2 and energy absorption of 97% which satisfy the design goals. Calculations of tritium diffusion through the grains and heat removal from the grains showed that neither could be removed by the carrier gas; tritium and heat are therefore removed by removing the grains themselves by varying the helium flow rate. The particles are continuously fed into the bottom of the tanks at 300 0 C and removed at the top at 475 0 C. Tritium and heat extraction are easily and conveniently done outside the reactor

High-resolution mapping of yield curve shape and evolution for high porosity sandstones

Science.gov (United States)

Bedford, J. D.; Faulkner, D.; Wheeler, J.; Leclere, H.

2017-12-01

The onset of permanent inelastic deformation for porous rock is typically defined by a yield curve plotted in P-Q space, where P is the effective mean stress and Q is the differential stress. Sandstones usually have broadly elliptical shaped yield curves, with the low pressure side of the ellipse associated with localized brittle faulting (dilation) and the high pressure side with distributed ductile deformation (compaction). However recent works have shown that these curves might not be perfectly elliptical and that significant evolution in shape occurs with continued deformation. We therefore use a novel stress-probing methodology to map in high-resolution the yield curve shape for Boise and Idaho Gray sandstones (36-38% porosity) and also investigate curve evolution with increasing deformation. The data reveal yield curves with a much flatter geometry than previously recorded for porous sandstone and that the compactive side of the curve is partly comprised of a near vertical limb. The yield curve evolution is found to be strongly dependent on the nature of inelastic strain. Samples that were compacted under a deviatoric load, with a component of inelastic shear strain, were found to have yield curves with peaks that are approximately 50% higher than similar porosity samples that were hydrostatically compacted (i.e. purely volumetric strain). The difference in yield curve evolution along the different loading paths is attributed to mechanical anisotropy that develops during deviatoric loading by the closure of preferentially orientated fractures. Increased shear strain also leads to the formation of a plateau at the peak of the yield curve as samples deform along the deviatoric loading path. These results have important implications for understanding how the strength of porous rock evolves along different stress paths, including during fluid extraction from hydrocarbon reservoirs where the stress state is rarely isotropic.

Thermodynamic and dynamical properties of dense ICF plasma

Directory of Open Access Journals (Sweden)

Gabdullin Maratbek T.

2016-06-01

Full Text Available In present work, thermodynamic expressions were obtained through potentials that took into consideration long-range many-particle screening effects as well as short-range quantum-mechanical effects and radial distribution functions (RDFs. Stopping power of the projectile ions in dense, non-isothermal plasma was considered. One of the important values that describe the stopping power of the ions in plasma is the Coulomb logarithm. We investigated the stopping power of ions in inertial confinement fusion (ICF plasma and other energetic characteristics of fuel. Calculations of ions energy losses in the plasma for different values of the temperature and plasma density were carried out. A comparison of the calculated data of ion stopping power and energy deposition with experimental and theoretical results of other authors was also performed.

Heavy ion beam transport through liquid lithium first wall ICF reactor cavities

International Nuclear Information System (INIS)

Stroud, P.D.

1985-01-01

This analysis addresses the critical issue of the final transport of a heavy ion beam in an inertial confinement fusion reactor. The beam must traverse the reaction chamber from the final focusing lens to the target without being disrupted. This requirement has a strong impact on the reactor design. It is essential to the development of ICF fusion reactor technology, that the restrictions placed on the reactor engineering parameters by final beam transport consideration be understood early on

High yielding rice mutants for West Bengal

International Nuclear Information System (INIS)

Debnath, A.R.; Sen, S.

1980-01-01

Four high yielding mutants with specific genetic corrections of the simply inherited characters were developed from IR-8 through X-irradiation. Recurrent selections of the promising isolates were made under diverse agro-climatic conditions in Winter and Summer seasons of West Bengal. The isolates CNM 6 and CNM 25 belonging to early maturity group and CNM 20 and CNM 31, to mid-early maturity group were finally selected at X 5 generation on the basis of their resistance qualities, maturity period and grain yield. They were evaluated upto X 10 qeneration at multi-locations as Pre-release and Minikit Varieties at State level. They were also placed at the National Screening Nursery (NSN) for screening against multiple diseases and pests at the National level. CNM 6 is reported to be promising in IRTP nurseries. It is reported that CNM 25 (IET 5646) ranked 2nd on the basis of average grain yield, CNM 20 (IET 5937) and CNM 31 (IET 5936) were resistant to diseases and with yield comparable to Jaya. These four productive mutants of superior types are widely accepted. CNM 6 is recommended for cultivation in Bankura and Birbhum districts and CNM 25 and CNM 31 in the different agro-climatic zones of West Bengal. (author)

The holistic claims of the biopsychosocial conception of WHO's International Classification of Functioning, Disability, and Health (ICF): a conceptual analysis on the basis of a pluralistic-holistic ontology and multidimensional view of the human being.

Science.gov (United States)

Solli, Hans Magnus; da Silva, António Barbosa

2012-06-01

The International Classification of Functioning, Disability and Health (ICF), designed by the WHO, attempts to provide a holistic model of functioning and disability by integrating a medical model with a social one. The aim of this article is to analyze the ICF's claim to holism. The following components of the ICF's complexity are analyzed: (1) health condition, (2) body functions and structures, (3) activity, (4) participation, (5) environmental factors, (6) personal factors, and (7) health. Although the ICF claims to be holistic, it presupposes a monistic materialistic ontology. We indicate some limitations of this ontology, proposing instead: (a) a pluralistic-holistic ontology (PHO) and (b) a multidimensional view of the human being, with individual and environmental aspects, in relation to three levels of reality implied by the PHO. For the ICF to attain its holistic claim, the interactions between its components should be based on (a) and (b).

High ethanol yields using Aspergillus oryzae koji and corn media

Energy Technology Data Exchange (ETDEWEB)

Ziffer, J.; Iosif, M.C.

1982-01-01

High ethanol and stillage solids were achieved using whole corn mashes. Ethanol yields of 14% (98.5% of theory) and stillage levels of approximately 23% were obtained in 74-90 hours using mild acid pretreatment with A. oryzae wheat bran koji saccharification. High ethanol yields were also obtained with bacterial amylase, instead of the acid treatment, when the sterilization step was omitted. The implications of ethanol fermentation process modifications are explored.

Yield-determining factors in high-solids enzymatic hydrolysis of lignocellulose

Directory of Open Access Journals (Sweden)

Felby Claus

2009-06-01

Full Text Available Abstract Background Working at high solids (substrate concentrations is advantageous in enzymatic conversion of lignocellulosic biomass as it increases product concentrations and plant productivity while lowering energy and water input. However, for a number of lignocellulosic substrates it has been shown that at increasing substrate concentration, the corresponding yield decreases in a fashion which can not be explained by current models and knowledge of enzyme-substrate interactions. This decrease in yield is undesirable as it offsets the advantages of working at high solids levels. The cause of the 'solids effect' has so far remained unknown. Results The decreasing conversion at increasing solids concentrations was found to be a generic or intrinsic effect, describing a linear correlation from 5 to 30% initial total solids content (w/w. Insufficient mixing has previously been shown not to be involved in the effect. Hydrolysis experiments with filter paper showed that neither lignin content nor hemicellulose-derived inhibitors appear to be responsible for the decrease in yields. Product inhibition by glucose and in particular cellobiose (and ethanol in simultaneous saccharification and fermentation at the increased concentrations at high solids loading plays a role but could not completely account for the decreasing conversion. Adsorption of cellulases was found to decrease at increasing solids concentrations. There was a strong correlation between the decreasing adsorption and conversion, indicating that the inhibition of cellulase adsorption to cellulose is causing the decrease in yield. Conclusion Inhibition of enzyme adsorption by hydrolysis products appear to be the main cause of the decreasing yields at increasing substrate concentrations in the enzymatic decomposition of cellulosic biomass. In order to facilitate high conversions at high solids concentrations, understanding of the mechanisms involved in high-solids product inhibition

Intense light-ion beams provide a robust, common-driver path toward ignition, gain, and commercial fusion energy

International Nuclear Information System (INIS)

Ramirez, J.J.; Cook, D.L.

1993-01-01

Intense light-ion beams are being developed for investigations of inertial confinement fusion (ICF). This effort has concentrated on developing the Particle Beam Fusion Accelerator II (PBFA II) at Sandia as a driver for ICF target experiments, on design concepts for a high-yield, high-gain Laboratory Microfusion Facility (LMF), and on a comprehensive system study of a light-ion beam-driven commercial fusion reactor (LIBRA). Reports are given on the status of design concepts and research in these areas. (author)

[Characteristics of phosphorus uptake and use efficiency of rice with high yield and high phosphorus use efficiency].

Science.gov (United States)

Li, Li; Zhang, Xi-Zhou; Li, Tinx-Xuan; Yu, Hai-Ying; Ji, Lin; Chen, Guang-Deng

2014-07-01

A total of twenty seven middle maturing rice varieties as parent materials were divided into four types based on P use efficiency for grain yield in 2011 by field experiment with normal phosphorus (P) application. The rice variety with high yield and high P efficiency was identified by pot experiment with normal and low P applications, and the contribution rates of various P efficiencies to yield were investigated in 2012. There were significant genotype differences in yield and P efficiency of the test materials. GRLu17/AiTTP//Lu17_2 (QR20) was identified as a variety with high yield and high P efficiency, and its yields at the low and normal rates of P application were 1.96 and 1.92 times of that of Yuxiang B, respectively. The contribution rate of P accumulation to yield was greater than that of P grain production efficiency and P harvest index across field and pot experiments. The contribution rates of P accumulation and P grain production efficiency to yield were not significantly different under the normal P condition, whereas obvious differences were observed under the low P condition (66.5% and 26.6%). The minimal contribution to yield was P harvest index (11.8%). Under the normal P condition, the contribution rates of P accumulation to yield and P harvest index were the highest at the jointing-heading stage, which were 93.4% and 85.7%, respectively. In addition, the contribution rate of P accumulation to grain production efficiency was 41.8%. Under the low P condition, the maximal contribution rates of P accumulation to yield and grain production efficiency were observed at the tillering-jointing stage, which were 56.9% and 20.1% respectively. Furthermore, the contribution rate of P accumulation to P harvest index was 16.0%. The yield, P accumulation, and P harvest index of QR20 significantly increased under the normal P condition by 20.6%, 18.1% and 18.2% respectively compared with that in the low P condition. The rank of the contribution rates of P

Possibilities and Implications of Using the ICF and Other Vocabulary Standards in Electronic Health Records.

Science.gov (United States)

Vreeman, Daniel J; Richoz, Christophe

2015-12-01

There is now widespread recognition of the powerful potential of electronic health record (EHR) systems to improve the health-care delivery system. The benefits of EHRs grow even larger when the health data within their purview are seamlessly shared, aggregated and processed across different providers, settings and institutions. Yet, the plethora of idiosyncratic conventions for identifying the same clinical content in different information systems is a fundamental barrier to fully leveraging the potential of EHRs. Only by adopting vocabulary standards that provide the lingua franca across these local dialects can computers efficiently move, aggregate and use health data for decision support, outcomes management, quality reporting, research and many other purposes. In this regard, the International Classification of Functioning, Disability, and Health (ICF) is an important standard for physiotherapists because it provides a framework and standard language for describing health and health-related states. However, physiotherapists and other health-care professionals capture a wide range of data such as patient histories, clinical findings, tests and measurements, procedures, and so on, for which other vocabulary standards such as Logical Observation Identifiers Names and Codes and Systematized Nomenclature Of Medicine Clinical Terms are crucial for interoperable communication between different electronic systems. In this paper, we describe how the ICF and other internationally accepted vocabulary standards could advance physiotherapy practise and research by enabling data sharing and reuse by EHRs. We highlight how these different vocabulary standards fit together within a comprehensive record system, and how EHRs can make use of them, with a particular focus on enhancing decision-making. By incorporating the ICF and other internationally accepted vocabulary standards into our clinical information systems, physiotherapists will be able to leverage the potent

A Phoswich Detector System to Measure Sub-Second Half-Lives using ICF Reactions

Science.gov (United States)

Coats, Micah; Cook, Katelyn; Yuly, Mark; Padalino, Stephen; Sangster, Craig; Regan, Sean

2017-10-01

The 3H(t,γ)6He cross section has not been measured at any bombarding energy due to the difficulties of simultaneously producing both a tritium beam and target at accelerator labs. An alternative technique may be to use an ICF tt implosion at the OMEGA Laser Facility. The 3H(t,γ)6He cross section could be determined in situ by measuring the beta decay of 6He beginning a few milliseconds after the shot along with other ICF diagnostics. A dE-E phoswich system capable of surviving in the OMEGA target chamber was tested using the SUNY Geneseo pelletron to create neutrons via 2H(d,n)3He and subsequently 6He via 9Be(n,α)6He in a beryllium target. The phoswich dE-E detector system was used to select beta decay events and measure the 807 ms half-life of 6He. It is composed of a thin, 2 ns decay time dE scintillator optically coupled to a thick, 285 ns E scintillator, with a linear gate to separate the short dE pulse from the longer E tail. Funded in part by a Grant from the DOE through the Laboratory for Laser Energetics.

Conceptual design of a large E-beam-pumped KrF laser for ICF commercial applications

International Nuclear Information System (INIS)

Harris, D.B.; Waganer, L.M.; Zuckerman, D.S.; Bowers, D.A.

1986-01-01

Two types of KrF lasers appear attractive as a driver for an ICF electric power plant. The original concept uses large electron-beam-pumped amplifiers and pure angular multiplexing to deliver short, shaped pulses to the target. A recently conceived alternate concept uses many small, long-pulse e-beam sustained discharge lasers which transfer their energy through the forward Raman process to a multiplexed set of beams to deliver the energy to target. Preliminary comparisons of the two systems indicate that the original concept has both a lower cost and a lower system efficiency, and both concepts appear to be nearly equally attractive as an ICF driver for an electric power plant. This paper examines a 4.8 MJ, 5 Hz KrF laser system designed using the original concept. The laser uses 24 main amplifiers arranged in eight sets of three amplifiers each. This layout optimizes both the optical system and the gas flow system, and uses a simple target illumination scheme that provides neutron shielding to allow hands-on maintenance in the laser hall

Executive Summary High-Yield Scenario Workshop Series Report

Energy Technology Data Exchange (ETDEWEB)

Leslie Park Ovard; Thomas H. Ulrich; David J. Muth Jr.; J. Richard Hess; Steven Thomas; Bryce Stokes

2009-12-01

To get a collective sense of the impact of research and development (R&D) on biomass resource availability, and to determine the feasibility that yields higher than baseline assumptions used for past assessments could be achieved to support U.S. energy independence, an alternate “High-Yield Scenario” (HYS) concept was presented to industry experts at a series of workshops held in December 2009. The workshops explored future production of corn/agricultural crop residues, herbaceous energy crops (HECs), and woody energy crops (WECs). This executive summary reports the findings of that workshop.

Intense ion beams for inertial confinement fusion

International Nuclear Information System (INIS)

Mehlhorn, T.A.

1997-01-01

Intense beams of light of heavy ions are being studied as inertial confinement fusion (ICF) drivers for high yield and energy. Heavy and light ions have common interests in beam transport, targets, and alternative accelerators. Self-pinched transport is being jointly studied. This article reviews the development of intense ion beams for ICF. Light-ion drivers are highlighted because they are compact, modular, efficient and low cost. Issues facing light ions are: (1) decreasing beam divergence; (2) increasing beam brightness; and (3) demonstrating self-pinched transport. Applied-B ion diodes are favored because of efficiency, beam brightness, perceived scalability, achievable focal intensity, and multistage capability. A light-ion concept addressing these issues uses: (1) an injector divergence of ≤ 24 mrad at 9 MeV; (2) two-stage acceleration to reduce divergence to ≤ 12 mrad at 35 MeV; and (3) self-pinched transport accepting divergences up to 12 mrad. Substantial progress in ion-driven target physics and repetitive ion diode technology is also presented. Z-pinch drivers are being pursued as the shortest pulsed power path to target physics experiments and high-yield fusion. However, light ions remain the pulsed power ICF driver of choice for high-yield fusion energy applications that require driver standoff and repetitive operation. 100 refs

Selection of common bean lines with high grain yield and high grain calcium and iron concentrations

Directory of Open Access Journals (Sweden)

Nerinéia Dalfollo Ribeiro

2014-02-01

Full Text Available Genetic improvement of common bean nutritional quality has advantages in marketing and can contribute to society as a food source. The objective of this study was to evaluate the genetic variability for grain yield, calcium and iron concentrations in grains of inbred common bean lines obtained by different breeding methods. For this, 136 F7 inbred lines were obtained using the Pedigree method and 136 F7 inbred lines were obtained using the Single-Seed Descent (SSD method. The lines showed genetic variability for grain yield, and concentrations of calcium and iron independently of the method of advancing segregating populations. The Pedigree method allows obtaining a greater number of lines with high grain yield. Selection using the SSD method allows the identification of a larger number of lines with high concentrations of calcium and iron in grains. Weak negative correlations were found between grain yield and calcium concentration (r = -0.0994 and grain yield and iron concentration (r = -0.3926. Several lines show genetic superiority for grain yield and concentrations of calcium and iron in grains and their selection can result in new common bean cultivars with high nutritional quality.

KrF laser cost/performance model for ICF commercial applications

International Nuclear Information System (INIS)

Harris, D.B.; Pendergrass, J.H.

1985-01-01

Simple expressions suitable for use in commercial-applications plant parameter studies for the direct capital cost plus indirect field costs and for the efficiency as a function of repetition rate were developed for pure-optical-compression KrF laser fusion drivers. These simple expressions summarize estimates obtained from detailed cost-performance studies incorporating recent results of ongoing physics, design, and cost studies. Contributions of KrF laser capital charges and D and M costs to total levelized constant-dollar (1984) unit ICF power generation cost are estimated as a function of plant size and driver pulse energy using a published gain for short-wavelength lasers and representative values of plant parameters

Liquid momentum removal using rod arrays applied to the HYLIFE ICF reactor

International Nuclear Information System (INIS)

Raffray, A.R.; Hoffman, M.A.

1986-01-01

This research relates to the multiple liquid-lithium-jet blanket concept for the HYLIFE inertial-confinement fusion (ICF) reactor. The fusion micro-explosion would result in part of the liquid lithium being propelled towards the vacuum chamber wall where the resulting impact would cause high peak stresses. In an attempt to reduce these peak stresses, it was proposed to set up an array of bars between the vacuum vessel first wall and the liquid jets so that part of the liquid momentum would be removed as the liquid passed through the bars. A series of small-scale scoping experiments were run to obtain a preliminary evaluation of the effectiveness of such rod arrays in removing momentum from impinging liquid slugs. The impact force of an unconfined cylindrical water jet on in-line and staggered rod arrays was measured. The results indicate that the fraction of momentum removed from liquid slugs could probably exceed 18% for a staggered rod arrangement in the HYLIFE reactor

Added-values of high spatiotemporal remote sensing data in crop yield estimation

Science.gov (United States)

Gao, F.; Anderson, M. C.

2017-12-01

Timely and accurate estimation of crop yield before harvest is critical for food market and administrative planning. Remote sensing derived parameters have been used for estimating crop yield by using either empirical or crop growth models. The uses of remote sensing vegetation index (VI) in crop yield modeling have been typically evaluated at regional and country scales using coarse spatial resolution (a few hundred to kilo-meters) data or assessed over a small region at field level using moderate resolution spatial resolution data (10-100m). Both data sources have shown great potential in capturing spatial and temporal variability in crop yield. However, the added value of data with both high spatial and temporal resolution data has not been evaluated due to the lack of such data source with routine, global coverage. In recent years, more moderate resolution data have become freely available and data fusion approaches that combine data acquired from different spatial and temporal resolutions have been developed. These make the monitoring crop condition and estimating crop yield at field scale become possible. Here we investigate the added value of the high spatial and temporal VI for describing variability of crop yield. The explanatory ability of crop yield based on high spatial and temporal resolution remote sensing data was evaluated in a rain-fed agricultural area in the U.S. Corn Belt. Results show that the fused Landsat-MODIS (high spatial and temporal) VI explains yield variability better than single data source (Landsat or MODIS alone), with EVI2 performing slightly better than NDVI. The maximum VI describes yield variability better than cumulative VI. Even though VI is effective in explaining yield variability within season, the inter-annual variability is more complex and need additional information (e.g. weather, water use and management). Our findings augment the importance of high spatiotemporal remote sensing data and supports new moderate

Low cost, high yield IFE reactors: Revisiting Velikhov's vaporizing blankets

International Nuclear Information System (INIS)

Logan, B.G.

1992-01-01

The performance (efficiency and cost) of IFE reactors using MHD conversion is explored for target blanket shells of various materials vaporized and ionized by high fusion yields (5 to 500 GJ). A magnetized, prestressed reactor chamber concept is modeled together with previously developed models for the Compact Fusion Advanced Rankine II (CFARII) MHD Balance-of-Plant (BoP). Using conservative 1-D neutronics models, high fusion yields (20 to 80 GJ) are found necessary to heat Flibe, lithium, and lead-lithium blankets to MHD plasma temperatures, at initial solid thicknesses sufficient to capture most of the fusion yield. Advanced drivers/targets would need to be developed to achieve a ''Bang per Buck'' figure-of-merit approx-gt 20 to 40 joules yield per driver $ for this scheme to be competitive with these blanket materials. Alternatively, more realistic neutronics models and better materials such as lithium hydride may lower the minimum required yields substantially. The very low CFARII BoP costs (contributing only 3 mills/kWehr to CoE) allows this type of reactor, given sufficient advances that non-driver costs dominate, to ultimately produce electricity at a much lower cost than any current nuclear plant

The MentDis_ICF65+study protocol: prevalence, 1-year incidence and symptom severity of mental disorders in the elderly and their relationship to impairment, functioning (ICF) and service utilisation

OpenAIRE

Andreas, Sylke; Haerter, Martin; Volkert, Jana; Hausberg, Maria; Sehner, Susanne; Wegscheider, Karl; Rabung, Sven; Ausin, Berta; Canuto, Alessandra; Da Ronch, Chiara; Grassi, Luigi; Hershkovitz, Yael; Lelliott, Paul; Munoz, Manuel; Quirk, Alan

2013-01-01

Background The EU currently lacks reliable data on the prevalence and incidence of mental disorders in older people. Despite the availability of several national and international epidemiological studies, the size and burden of mental disorders in the elderly remain unclear due to various reasons. Therefore, the aims of the MentDis_ICF65+ study are (1) to adapt existing assessment instruments, and (2) to collect data on the prevalence, the incidence, and the natural course and prognosis of me...

Breeding high yielding, high protein spring wheats: Problems, progress and approaches to further advances

International Nuclear Information System (INIS)

Konzak, C.F.; Rubenthaler, G.L.

1984-01-01

Preliminary data offer promise that advances have been made in breeding hard red spring wheat selections with a yielding capacity about equal to current cultivars and with an increased capacity for producing high protein grain. The most promising new selections are derivatives of Magnif 41M1, CI17689, a semi-dwarf mutant of an Argentinian high protein cultivar. Rapid changes in disease and pest problems also required immediate attention and a reorientation of breeding materials and goals. Selection procedures suggested as promising include early generation (F 2 and F 3 ) screening for disease resistance and agronomic type, with screening for protein content delayed until F 4 or F 5 . Cultural conditions conducive for expressing the highest yield capacity are proposed as optimum for identifying those selections also able to produce high protein grain. A goal of routine production of 14.5% (or higher) protein grain is considered necessary and achievable under fertility management conditions required for maximum yield expression of agronomically competitive cultivars. Agronomically improved sources of high protein genes, an increasing number of induced high protein mutants, and numerous high protein crossbred derivatives of T. dicoccoides and Aegilops species have recently become available. These new or improved germplasm sources as well as a considerable reserve of yet untapped germplasm variability in other accessions of wild T. dicoccoides offer increased optimism that further, rapid advances in the breeding of adapted high yielding, high protein wheats are achievable. Improved breeding schemes, using induced male sterility mutants either to aid in crossing or to develop male sterile facilitated recurrent selection (MSFRS) populations, should contribute towards an earlier achievement of the desired goal while providing the basis for buffering against rapid changes in disease and pest problems

Investigation of fitting capability of active mirror for controlling ICF's focal profile

International Nuclear Information System (INIS)

Zeng Zhige; Ling Ning; Jiang Wenhan

1998-01-01

Laser beam's profile at focal plane can be controlled using active mirror in ICF system because the beam's profile has strong relationship with the surface of active mirror, the surface of active mirror can be changed at any time and maintained for a long time. The capabilities of fitting given wave-front (computed by Geometric Transformation Method) at conditions of different actuator numbers and different arrangement have been investigated by computer simulation. The computing results present that the needed laser profile can obtained by adaptive optical technology

Quartz crystal microbalance-based system for high-sensitivity differential sputter yield measurements

International Nuclear Information System (INIS)

Rubin, B.; Topper, J. L.; Farnell, C. C.; Yalin, A. P.

2009-01-01

We present a quartz crystal microbalance-based system for high sensitivity differential sputter yield measurements of different target materials due to ion bombardment. The differential sputter yields can be integrated to find total yields. Possible ion beam conditions include ion energies in the range of 30-350 eV and incidence angles of 0 deg. - 70 deg. from normal. A four-grid ion optics system is used to achieve a collimated ion beam at low energy (<100 eV) and a two-grid ion optics is used for higher energies (up to 750 eV). A complementary weight loss approach is also used to measure total sputter yields. Validation experiments are presented that confirm high sensitivity and accuracy of sputter yield measurements.

Physics of laser fusion. Volume III. High-power pulsed lasers

International Nuclear Information System (INIS)

Holzrichter, J.F.; Eimerl, D.; George, E.V.; Trenholme, J.B.; Simmons, W.W.; Hunt, J.T.

1982-09-01

High-power pulsed lasers can deliver sufficient energy on inertial-confinement fusion (ICF) time scales (0.1 to 10 ns) to heat and compress deuterium-tritium fuel to fusion-reaction conditions. Several laser systems have been examined, including Nd:glass, CO 2 , KrF, and I 2 , for their ICF applicability. A great deal of developmental effort has been applied to the Nd:glass laser and the CO 2 gas laser systems; these systems now deliver > 10 4 J and 20 x 10 12 W to ICF targets. We are constructing the Nova Nd:glass laser at LLNL to provide > 100 kJ and > 100 x 10 12 W of 1-μm radiation for fusion experimentation in the mid-1980s. For ICF target gain > 100 times the laser input, we expect that the laser driver must deliver approx. 3 to 5 MJ of energy on a time scale of 10 to 20 ns. In this paper we review the technological status of fusion-laser systems and outline approaches to constructing high-power pulsed laser drivers

High lysine and high yielding mutants in wheat (Triticum aestivum) L

International Nuclear Information System (INIS)

Mohammad, T.; Mahmood, F.; Ahmad, A.; Sattar, A.; Khan, I.

1988-01-01

The dry seeds of the variety Lu-26 were irradiated with 20 krad of gamma rays. In M 2 about 300 mutant plants were selected for short stature, rust resistance and other desirable traits. As a result of further selection, in M 6 , eight superior lines were finally identified. The agronomic characteristics of these mutants, the parent variety (Lu-26) and a standard check variety (Pak-81) are shown. The selected mutants and commercially grown cultivars (Lu-26 and Pak-81) were studied for total protein content and amino acid pattern. The mutants WM-89-1, WM-6-17 and WM-81-2 showing high yield also contained comparatively high amounts of methionine and lysine. The lysine contents were 565, 410, and 370 mg/100g in the mutants WM-89-1, WM-6-17 and WM-81-2, respectively against a range value of 210-370 mg/100g in other mutants and 250-320 in the commercial cultivars. The mutant WM-81-2 was comparable to WM-56-1-5 in lysine content. The results of these experiments show a possibility of developing varieties having high yield and high amounts of essential amino acids such as lysine and methionine

PRP Comments for ICF Q1/Q2 FY17 Experiments 3/10/16

Energy Technology Data Exchange (ETDEWEB)

Kauffman, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-04-14

The PRP generally endorsed the Program plan during the short time for discussions. We agree that the strategy to develop a hohlraum that is symmetric and has low laser-plasma instabilities and to develop an alternative method for supporting the capsule is the best path forward for making progress in understanding ignition performance. The Program is oriented toward a milestone in 2020 for “determining the efficacy of NIF for ignition and credible physics-scaling to multi-megajoule yields for all ICF approaches.” We are concerned that the time and resources are not sufficient to vet all of the various approaches that are being pursued to make an informed decision by this date. For NIF to meet this goal, a process will be needed to to select the most promising paths forward. We recommend that the Program develop this process for selecting the path forward to optimize resources. We were glad to see that the direct drive program took our comments under consideration. We think that the proposed experiments have the program headed in a better direction. The PRP had only a short time to discuss the detailed experimental proposals. The following are comments on the detailed proposals. We did not have time to discuss them as a group. They represent individual opinions and provided to you as feedback to your proposals.

The development and application of advanced analytical methods to commercial ICF reactor chambers. Final report

Energy Technology Data Exchange (ETDEWEB)

Cousseau, P.; Engelstad, R.; Henderson, D.L. [and others

1997-10-01

Progress is summarized in this report for each of the following tasks: (1) multi-dimensional radiation hydrodynamics computer code development; (2) 2D radiation-hydrodynamic code development; (3) ALARA: analytic and Laplacian adaptive radioactivity analysis -- a complete package for analysis of induced activation; (4) structural dynamics modeling of ICF reactor chambers; and (5) analysis of self-consistent target chamber clearing.

The development and application of advanced analytical methods to commercial ICF reactor chambers. Final report

International Nuclear Information System (INIS)

Cousseau, P.; Engelstad, R.; Henderson, D.L.

1997-10-01

Progress is summarized in this report for each of the following tasks: (1) multi-dimensional radiation hydrodynamics computer code development; (2) 2D radiation-hydrodynamic code development; (3) ALARA: analytic and Laplacian adaptive radioactivity analysis -- a complete package for analysis of induced activation; (4) structural dynamics modeling of ICF reactor chambers; and (5) analysis of self-consistent target chamber clearing

A transversal multicenter study assessing functioning, disability and environmental factors with the comprehensive ICF core set for low back pain in Brazil.

Science.gov (United States)

Riberto, M; Chiappetta, L M; Lopes, K A; Chiappetta, L R

2014-04-01

Low back pain is a leading cause of disability in Brazil. The multiple aspects of disability in these patients require comprehensive tools for their assessment. The International Classification of Functioning, Disability, and Health (ICF) core set for low back pain is designed to comprehensively describe the experience of such patients with their functioning. This study aimed to describe functioning and contextual factors and to empirically validate the ICF core set for low back pain. Cross sectional study. Three outpatient clinics in Manaus, Maceio and São Paulo, Brazil. Population. 135 low back pain outpatients under rehabilitation. Data concerning diagnosis, personal features, and the 78 ICF core set categories for low back pain were collected from clinical charts, physical examinations, tests, and interviews with patients from rehabilitation services in three parts of Brazil. 7.7% of the categories (6 body functions and 10 activity and participation) were affected in less than 20% of the sample, and were thus considered not validated. Pain and other sensations related to the musculoskeletal system were the body most frequently impaired functions. Mobility and domestic life were the chapters of activity and limitation most often described as limited. All environmental factors were qualified as either facilitators or barriers and acted as modulators of disability. The comprehensive ICF core sets for low back pain can be used to describe the living experience of such individuals, although efforts to make it operational and enhance the reproducibility of the results are needed to warrant its reliable routine use. This study highlights the importance of a complete assessment of chronic low back pain and demonstrate the need for multidisciplinary approach.

Experiment of ambient temperature distribution in ICF driver's target building

International Nuclear Information System (INIS)

Zhou Yi; He Jie; Yang Shujuan; Zhang Junwei; Zhou Hai; Feng Bin; Xie Na; Lin Donghui

2009-01-01

An experiment is designed to explore the ambient temperature distribution in an ICF driver's target building, Multi-channel PC-2WS temperature monitoring recorders and PTWD-2A precision temperature sensors are used to measure temperatures on the three vertical cross-sections in the building, and the collected data have been handled by MATLAB. The experiment and analysis show that the design of the heating ventilation and air conditioning (HVAC) system can maintain the temperature stability throughout the building. However, because of the impact of heat in the target chamber, larger local environmental temperature gradients appear near the marshalling yard, the staff region on the middle floor, and equipments on the lower floor which needs to be controlled. (authors)

Numerical analysis of anisotropic diffusion effect on ICF hydrodynamic instabilities

Directory of Open Access Journals (Sweden)

Olazabal-Loumé M.

2013-11-01

Full Text Available The effect of anisotropic diffusion on hydrodynamic instabilities in the context of Inertial Confinement Fusion (ICF flows is numerically assessed. This anisotropy occurs in indirect-drive when laminated ablators are used to modify the lateral transport [1,2]. In direct-drive, non-local transport mechanisms and magnetic fields may modify the lateral conduction [3]. In this work, numerical simulations obtained with the code PERLE [4], dedicated to linear stability analysis, are compared with previous theoretical results [5]. In these approaches, the diffusion anisotropy can be controlled by a characteristic coefficient which enables a comprehensive study. This work provides new results on the ablative Rayleigh-Taylor (RT, ablative Richtmyer-Meshkov (RM and Darrieus-Landau (DL instabilities.

The Edward Teller Medal Lecture: the Evolution Toward Indirect Drive and Two Decades of Progress Toward Icf Ignition and Burn (lirpp Vol. 11)

Science.gov (United States)

Lindl, John D.

2016-10-01

In 1972, I joined the Livermore ICF Theory and Target Design group led by John Nuckolls, shortly after publication of John's seminal Nature article on ICF. My primary role, working with others in the target design program including Mordy Rosen, Steve Haan, and Larry Suter, has been as a target designer and theorist who utilized the LASNEX code to perform numerical experiments, which along with analysis of laboratory and underground thermonuclear experiments allowed me to develop a series of models and physical insights which have been used to set the direction and priorities of the Livermore program...

ICF-CY as a Tool in Elementary School : An interview study of teacher experiences and perceptions of the International Classification of Functioning, Disability and Health for Children and Youth in their Work in Elementary School

OpenAIRE

Tulinius, Halla Kristín

2008-01-01

AIM OF THE STUDY The aim of this study was to explore if ICF-CY can support teachers in elementary schools in their work in promoting children’s health, development and learning. A further aim was to bring forward what teachers experience as benefits and disadvantages in using the classification.   METHOD After an introduction to ICF-CY, six elementary school teachers filled in questionnaires based on ICF-CY for 94 children. In conjunction with this, the teachers were interviewed about their ...

Recyclable transmission line (RTL) and linear transformer driver (LTD) development for Z-pinch inertial fusion energy (Z-IFE) and high yield

International Nuclear Information System (INIS)

Sharpe, Robin Arthur; Kingsep, Alexander S.; Smith, David Lewis; Olson, Craig Lee; Ottinger, Paul F.; Schumer, Joseph Wade; Welch, Dale Robert; Kim, Alexander; Kulcinski, Gerald L.; Kammer, Daniel C.; Rose, David Vincent; Nedoseev, Sergei L.; Pointon, Timothy David; Smirnov, Valentin P.; Turgeon, Matthew C.; Kalinin, Yuri G.; Bruner, Nichelle

2007-01-01

demonstrated at the SNL Z-IFE LTD laboratory with rep-rates up to 10.3 seconds between shots (this is essentially at the goal of 10 seconds for Z-IFE). (7) A single LTD switch at Tomsk was fired repetitively every 12 seconds for 36,000 shots with no failures. (8) Five 1.0 MA, 100 kV, 100 ns, LTD cavities have been combined into a voltage adder configuration with a test load to successfully study the system operation. (9) The combination of multiple LTD coaxial lines into a tri-plate transmission line is examined. The 3D Quicksilver code is used to study the electron flow losses produced near the magnetic nulls that occur where coax LTD lines are added together. (10) Circuit model codes are used to model the complete power flow circuit with an inductive isolator cavity. (11) LTD architectures are presented for drivers for Z-IFE and high yield. A 60 MA LTD driver and a 90 MA LTD driver are proposed. Present results from all of these power flow studies validate the whole LTD/RTL concept for single-shot ICF high yield, and for repetitive-shot IFE

Recyclable transmission line (RTL) and linear transformer driver (LTD) development for Z-pinch inertial fusion energy (Z-IFE) and high yield.

Energy Technology Data Exchange (ETDEWEB)

Sharpe, Robin Arthur; Kingsep, Alexander S. (Kurchatov Institute, Moscow, Russia); Smith, David Lewis; Olson, Craig Lee; Ottinger, Paul F. (Naval Research Laboratory, Washington, DC); Schumer, Joseph Wade (Naval Research Laboratory, Washington, DC); Welch, Dale Robert (Voss Scientific, Albuquerque, NM); Kim, Alexander (High Currents Institute, Tomsk, Russia); Kulcinski, Gerald L. (University of Wisconsin, Madison, WI); Kammer, Daniel C. (University of Wisconsin, Madison, WI); Rose, David Vincent (Voss Scientific, Albuquerque, NM); Nedoseev, Sergei L. (Kurchatov Institute, Moscow, Russia); Pointon, Timothy David; Smirnov, Valentin P. (Kurchatov Institute, Moscow, Russia); Turgeon, Matthew C.; Kalinin, Yuri G. (Kurchatov Institute, Moscow, Russia); Bruner, Nichelle " Nicki" (Voss Scientific, Albuquerque, NM); Barkey, Mark E. (University of Alabama, Tuscaloosa, AL); Guthrie, Michael (University of Wisconsin, Madison, WI); Thoma, Carsten (Voss Scientific, Albuquerque, NM); Genoni, Tom C. (Voss Scientific, Albuquerque, NM); Langston, William L.; Fowler, William E.; Mazarakis, Michael Gerrassimos

2007-01-01

demonstrated at the SNL Z-IFE LTD laboratory with rep-rates up to 10.3 seconds between shots (this is essentially at the goal of 10 seconds for Z-IFE). (7) A single LTD switch at Tomsk was fired repetitively every 12 seconds for 36,000 shots with no failures. (8) Five 1.0 MA, 100 kV, 100 ns, LTD cavities have been combined into a voltage adder configuration with a test load to successfully study the system operation. (9) The combination of multiple LTD coaxial lines into a tri-plate transmission line is examined. The 3D Quicksilver code is used to study the electron flow losses produced near the magnetic nulls that occur where coax LTD lines are added together. (10) Circuit model codes are used to model the complete power flow circuit with an inductive isolator cavity. (11) LTD architectures are presented for drivers for Z-IFE and high yield. A 60 MA LTD driver and a 90 MA LTD driver are proposed. Present results from all of these power flow studies validate the whole LTD/RTL concept for single-shot ICF high yield, and for repetitive-shot IFE.

Fusion with highly spin polarized HD and D2

International Nuclear Information System (INIS)

Honig, A.; Letzring, S.; Skupsky, S.

1993-01-01

The experimental efforts over the past 5 years have been aimed at carrying out ICF shots with spin-polarized D fuel. The authors successfully prepared polarized D in HD, and solved the problems of loading target shells with their carefully prepared isotopic mixtures, polarizing them so that the D polarization remains metastably frozen-in for about half a day, and carrying out the various cold transfer requirements at Syracuse, where the target is prepared, and at Rochester, where the cold target is inserted into the OMEGA fusion chamber. A principal concern during this past year was overcoming difficulties encountered in maintaining the integrity of the fragile cold target during the multitude of cold-transfers required for the experiment. These difficulties arose from insufficient rigidity of the cold transfer systems, which were constrained to be of small diameter by the narrow central access bore of the dilution refrigerator, and were exacerbated by the multitude of required target shell manipulations between different environments, each with different coupling geometry, including target shell permeation, polarization, storage, transport, retrieval and insertion into OMEGA. The authors did solve all of these problems, and were able to position a cold, high density but unpolarized target with required precision in OMEGA. Upon shooting the accurately positioned unpolarized high density cold target, no neutron yield was observed. Inspection inside the OMEGA tank after the shot indicated the absence of neutron yield was due to mal-timing or insufficient retraction rate of OMEGA's fast shroud mechanism, resulting in interception of at least 20 of the 24 laser beams by the faulty shroud. In spite of this, all elements of the complex experiment the authors originally undertook have been successfully demonstrated, and the cold retrieval concepts and methods they developed are being utilized on the ICF upgrades at Rochester and at Livermore

Microbial Species and Functional Diversity in Rice Rhizosphere of High-yield Special Ecological Areas

Directory of Open Access Journals (Sweden)

PAN Li-yuan

2016-11-01

Full Text Available Taoyuan, Yunnan Province is a special eco-site which keeps the highest yield records of rice cultivation in small planting areas. Soil microbial species and functional diversity were evaluated using cultivation method and BIOLOG ecoplates. The results showed that the microbial community of the high yield region was more abundant, and the total microbial population was 2 times of the control, furthermore, the areas belonged to the healthy "bacteria" soil, which was showed as bacteria > actinomycetes > fungi. Bacteria were the dominant populations in the rhizosphere of high yielding rice field, and the yield formation of rice was not correlated with the depth of soil layers. In order to obtain more species diversity information, Shannon diversity index H, Shannon evenness index E and Simpson index D were analyzed, and the results showed that microbial community diversity and evenness were not the main differences between the high and general yield areas. Then, the functional diversity of soil microbial community was investigated through the average well color development(AWCD and diversity index analyses. The results of AWCD analysis indicated that the metabolic activity of soil microbial community in high yield paddy soils were stronger than the control. Moreover, the difference range from large to small showed as tillering stage > harvest period > seedling period > rotation period, the stronger the rice growth, the greater the difference between the high yield region and the control. At tillering stage and harvest stage, due to the vigorous plant growth, the root exudates were rich, and the microbial communities of high yield paddy soils showed a strong metabolic activity and strong ability to use carbon sources. The results of Shannon, Simpson and McIntosh indices analysis indicated that common microbial species was not a key factor affecting the yield of rice. Tillering stage was a key period for the growth of high yield rice, and many

Characteristics of ICF Relevant Hohlraums Driven by X-Rays from a Z-Pinch

Energy Technology Data Exchange (ETDEWEB)

BOWERS,R.L.; CHANDLER,GORDON A.; HEBRON,DAVID E.; LEEPER,RAMON J.; MATUSKA,W.; MOCK,RAYMOND CECIL; NASH,THOMAS J.; OLSON,RICHARD E.; PETERSON,D.L.; PETERSON,R.R.; RUGGLES,LAURENCE E.; RUIZ,CARLOS L.; SANFORD,THOMAS W. L.; SIMPSON,WALTER W.; VESEY,ROGER A.

1999-11-03

Radiation environments characteristic of those encountered during the low-temperature foot pulse and subsequent higher-temperature early-step pulses (without the foot pulse) required for indirect-drive ICF ignition on the National ignition Facility have been produced in hohlraums driven by x-rays from a z-pinch. These environments provide a platform to better understand the dynamics of full-scale NIF hohlraums, ablator material, and capsules prior to NIF completion. Radiation temperature, plasma fill, and wall motion of these hohlraums are discussed.

Characteristics of ICF Relevant Hohlraums Driven by X-Rays from a Z-Pinch

International Nuclear Information System (INIS)

BOWERS, R.L.; CHANDLER, GORDON A.; HEBRON, DAVID E.; LEEPER, RAMON J.; MATUSKA, W.; MOCK, RAYMOND CECIL; NASH, THOMAS J.; OLSON, RICHARD E.; PETERSON, D.L.; PETERSON, R.R.; RUGGLES, LAURENCE E.; RUIZ, CARLOS L.; SANFORD, THOMAS W. L.; SIMPSON, WALTER W.; VESEY, ROGER A.

1999-01-01

Radiation environments characteristic of those encountered during the low-temperature foot pulse and subsequent higher-temperature early-step pulses (without the foot pulse) required for indirect-drive ICF ignition on the National ignition Facility have been produced in hohlraums driven by x-rays from a z-pinch. These environments provide a platform to better understand the dynamics of full-scale NIF hohlraums, ablator material, and capsules prior to NIF completion. Radiation temperature, plasma fill, and wall motion of these hohlraums are discussed

First-wall-coating candidates for ICF reactor chambers using dry-wall protection only

International Nuclear Information System (INIS)

Sink, D.A.

1983-01-01

Twenty pure metals were considered as potential candidates for first-wall coatings of ICF reactor chambers. Seven were found to merit further consideration based on the results of computer-code calculations of figures-of-merit. The seven are rhenium, iridium, molybdenum, chromium, tungsten, tantalum, and niobium (listed in order of decreasing values of figures-of-merit). The calculations are based on mechanical, thermal, and vacuum vaporization engineering constraints. A number of alloys of these seven metals are suggested as additional candidates

Separating heat stress from moisture stress: analyzing yield response to high temperature in irrigated maize

Science.gov (United States)

Carter, Elizabeth K.; Melkonian, Jeff; Riha, Susan J.; Shaw, Stephen B.

2016-09-01

Several recent studies have indicated that high air temperatures are limiting maize (Zea mays L.) yields in the US Corn Belt and project significant yield losses with expected increases in growing season temperatures. Further work has suggested that high air temperatures are indicative of high evaporative demand, and that decreases in maize yields which correlate to high temperatures and vapor pressure deficits (VPD) likely reflect underlying soil moisture limitations. It remains unclear whether direct high temperature impacts on yields, independent of moisture stress, can be observed under current temperature regimes. Given that projected high temperature and moisture may not co-vary the same way as they have historically, quantitative analyzes of direct temperature impacts are critical for accurate yield projections and targeted mitigation strategies under shifting temperature regimes. To evaluate yield response to above optimum temperatures independent of soil moisture stress, we analyzed climate impacts on irrigated maize yields obtained from the National Corn Growers Association (NCGA) corn yield contests for Nebraska, Kansas and Missouri. In irrigated maize, we found no evidence of a direct negative impact on yield by daytime air temperature, calculated canopy temperature, or VPD when analyzed seasonally. Solar radiation was the primary yield-limiting climate variable. Our analyses suggested that elevated night temperature impacted yield by increasing rates of phenological development. High temperatures during grain-fill significantly interacted with yields, but this effect was often beneficial and included evidence of acquired thermo-tolerance. Furthermore, genetics and management—information uniquely available in the NCGA contest data—explained more yield variability than climate, and significantly modified crop response to climate. Thermo-acclimation, improved genetics and changes to management practices have the potential to partially or completely

High-yield oil palm expansion spares land at the expense of forests in the Peruvian Amazon

International Nuclear Information System (INIS)

Gutiérrez-Vélez, Víctor H; DeFries, Ruth; Uriarte, María; Lim, Yili; Pinedo-Vásquez, Miguel; Padoch, Christine; Baethgen, Walter; Fernandes, Katia

2011-01-01

High-yield agriculture potentially reduces pressure on forests by requiring less land to increase production. Using satellite and field data, we assessed the area deforested by industrial-scale high-yield oil palm expansion in the Peruvian Amazon from 2000 to 2010, finding that 72% of new plantations expanded into forested areas. In a focus area in the Ucayali region, we assessed deforestation for high- and smallholder low-yield oil palm plantations. Low-yield plantations accounted for most expansion overall (80%), but only 30% of their expansion involved forest conversion, contrasting with 75% for high-yield expansion. High-yield expansion minimized the total area required to achieve production but counter-intuitively at higher expense to forests than low-yield plantations. The results show that high-yield agriculture is an important but insufficient strategy to reduce pressure on forests. We suggest that high-yield agriculture can be effective in sparing forests only if coupled with incentives for agricultural expansion into already cleared lands.

Yield strength of molybdenum, tantalum and tungsten at high strain rates and very high temperatures

International Nuclear Information System (INIS)

Škoro, G.P.; Bennett, J.R.J.; Edgecock, T.R.; Booth, C.N.

2012-01-01

Highlights: ► New experimental data on the yield strength of molybdenum, tantalum and tungsten. ► High strain rate effects at record high temperatures (up to 2700 K). ► Test of the consistency of the Zerilli–Armstrong model at very high temperatures. - Abstract: Recently reported results of the high strain rate, high temperature measurements of the yield strength of tantalum and tungsten have been analyzed along with new experimental results on the yield strength of molybdenum. Thin wires are subjected to high stress by passing a short, fast, high current pulse through a thin wire; the amplitude of the current governs the stress and the repetition rate of the pulses determines the temperature of the wire. The highest temperatures reached in the experiments were 2100 °C (for molybdenum), 2250 °C (for tantalum) and 2450 °C (for tungsten). The strain-rates in the tests were in the range from 500 to 1500 s −1 . The parameters for the constitutive equation developed by Zerilli and Armstrong have been determined from the experimental data and the results have been compared with the data obtained at lower temperatures. An exceptionally good fit is obtained for the deformation of tungsten.

An efficient method of fuel ice formation in moving free-standing ICF/IFE targets

Science.gov (United States)

Aleksandrova, I. V.; Bazdenkov, S. V.; Chtcherbakov, V. I.; Gromov, A. I.; Koresheva, E. R.; Koshelev, E. A.; Osipov, I. E.; Yaguzinskiy, L. S.

2004-04-01

Currently, research fields related to the elaboration of efficient layering methods for ICF/IFE applications are rapidly expanding. Significant progress has been made in the technology development based on rapid fuel layering inside moving free-standing targets (FST) which is referred to as the FST layering method. This paper presents our new results obtained in this area and describes technologically elegant solutions towards demonstrating a credible pathway for mass production of IFE cryogenic targets.

An efficient method of fuel ice formation in moving free-standing ICF/IFE targets

International Nuclear Information System (INIS)

Aleksandrova, I V; Bazdenkov, S V; Chtcherbakov, V I; Gromov, A I; Koresheva, E R; Koshelev, E A; Osipov, I E; Yaguzinskiy, L S

2004-01-01

Currently, research fields related to the elaboration of efficient layering methods for ICF/IFE applications are rapidly expanding. Significant progress has been made in the technology development based on rapid fuel layering inside moving free-standing targets (FST) which is referred to as the FST layering method. This paper presents our new results obtained in this area and describes technologically elegant solutions towards demonstrating a credible pathway for mass production of IFE cryogenic targets

High-yield criteria for panoramic radiography. Final report

International Nuclear Information System (INIS)

White, S.C.; Forsythe, A.B.

1982-06-01

Panoramic radiographs should be obtained when the examination offers the prospect of providing information that will assist in patient care. The purpose of this study was to determine whether high-yield criteria could be developed for the use of panoramic radiographs in the treatment planning of patients seeking dental care. Clinicians were asked what signs or symptoms caused them to order a panoramic radiograph upon patient admission into the UCLA Dental Clinic. At the time the patient was radiographed, a variety of demographic and clinical measures were recorded. The most important high-yield criterion for the panoramic examination is whether the radiograph is ordered for 'general screening examination' (a negative predictor) and whether the radiograph was ordered for any specific examination (a positive predictor). The use of these (or any other) decision rules required clinical judgment of the costs (social and economic) of a missed positive finding relative to that of an unproductive examination

The design and fabrication of power splitter used in the timescale system of soft X-ray energy dispersive spectrometer in ICF experiment

International Nuclear Information System (INIS)

Zhang Huige; China Academy of Engineering Physics, Mianyang; Bai Lixin; Yu Ruizhen; Yang Cunbang; Su Cunxiao

2006-01-01

An improved eight power splitter is designed and fabricated newly, which is crucial in the time-scale system of soft X-ray energy dispersive spectrometer. The spectrometer is used in ICF laser facility to measure the evolution of soft X-ray spectrum, whose duration is only several nanoseconds. The synchronization and high bandwidth of signals produced by power splitter are tested, which shows the power splitter could meet the strict requirements of the experiments. The discussion of further improvement of power splitter are also presented. (authors)

Sensitivity of ICF ignition conditions to non-Maxwellian DT fusion reactivity

International Nuclear Information System (INIS)

Garbett, W. J.

2013-01-01

The hotspot ignition conditions in ICF are determined by considering the power balance between fusion energy deposition and energy loss terms. Uncertainty in any of these terms has potential to modify the ignition conditions, changing the optimum ignition capsule design. This paper considers the impact of changes to the DT fusion reaction rate due to non-thermal ion energy distributions. The DT fusion reactivity has been evaluated for a class of non-Maxwellian distributions representing a perturbation to the tail of a thermal distribution. The resulting reactivity has been used to determine hotspot ignition conditions as a function of the characteristic parameter of the modified distribution. (authors)

High-Yield Synthesis of Zinc Oxide Nanoparticles from Bicontinuous Microemulsions

Directory of Open Access Journals (Sweden)

S. López-Cuenca

2011-01-01

Full Text Available The high-yield synthesis of zinc oxide (ZnO primary nanoparticles with high purity and with diameters between 6 and 22 nm using bicontinuous microemulsions is reported in this work. The ZnO nanoparticles were made by hydrolysis of Zn(NO32 with NaOH aqueous solution and precipitation, followed by calcination of the precipitate. Higher yields and productivities of ZnO nanoparticles were obtained compared to values produced with w/o micremulsions reported in the literature. Particles were characterized by transmission electronic microscopy (TEM, X-ray diffraction, and atomic absorption spectroscopy.

A high yielding, better quality chickpea mutant variety 'NIFA-95'

International Nuclear Information System (INIS)

Hassan, S.; Javed, M.A.; Khattak, S.U.K.; Iqbal, M.M.

2001-01-01

Chickpea or gram (Cicer arietinum L.) is an important legume crop of Pakistan, grown on over one million hectares annually. The national average yield of the crop is very low (0.5 t/ha) and thus the country had to spent about 2 billion rupees ($ 50 million) on import of pulses. The main causes of low yield are non-availability of genetic sources for resistance to various diseases especially gram blight Ascochyta rabiei (Pass.) Lab., insect pest (Pod borer) and non-adoption of proper production technology by the farmers. This calls for earnest efforts of breeders to evolve high yielding and disease resistant varieties of chickpea for provision of quality seeds to the farming community to increase production of this important crop. Seeds of a highly blight susceptible variety '6153' were irradiated at 200 Gy dose of gamma radiation in 1985 and the promising mutant line CMN-446-4 was selected in M3 generation on the basis of disease resistance, greater number of pods and better plant type. After confirmation of its resistance to blight in M 4 and M 5 , the mutant line was evaluated in various trials at different locations. In the advanced and zonal yield trials during 1993-95, the line CMN-446-4 produced the highest grain yield of 2,600 kg/ha as compared to the rest of the mutants and varieties. The line was also evaluated in the chickpea national uniform yield trial, conducted on over 11 locations in the country during 1993-94. In this trial, the mutant line ranked 3rd by producing an average yield of 1,528 kg/ha as compared to the two check varieties 'Punjab-91' (1,316 kg/ha) and 'Paidar-91' (1,391 kg/ha). The mutant line CMN-446-4 is moderately resistant to gram blight, highly resistant to stored pest (pulse beetle), contains 25.3% more protein as compared to the parental variety 6153 and is also better in nitrogen fixing capacity.The proposal for release of the mutant line CMN-446-4 as a new variety under the name 'NIFA-95' for general cultivation in the rainfed

Setting the Record Straight on "High-Yield" Strategies

Science.gov (United States)

Marzano, Robert J.

2009-01-01

Widely credited with proposing nine "high-yield" instructional strategies, author Robert J. Marzano sets the record straight about the broader number of strategies identified by the research. He provides a list of 41 strategies and suggests more nuanced ways of using, observing, and evaluating them. (Contains 1 figure.)

Methods for high yield production of terpenes

Energy Technology Data Exchange (ETDEWEB)

Kutchan, Toni; Higashi, Yasuhiro; Feng, Xiaohong

2017-01-03

Provided are enhanced high yield production systems for producing terpenes in plants via the expression of fusion proteins comprising various combinations of geranyl diphosphate synthase large and small subunits and limonene synthases. Also provided are engineered oilseed plants that accumulate monoterpene and sesquiterpene hydrocarbons in their seeds, as well as methods for producing such plants, providing a system for rapidly engineering oilseed crop production platforms for terpene-based biofuels.

Neglecting rice milling yield and quality underestimates economic losses from high-temperature stress.

Directory of Open Access Journals (Sweden)

Nathaniel B Lyman

Full Text Available Future increases in global surface temperature threaten those worldwide who depend on rice production for their livelihoods and food security. Past analyses of high-temperature stress on rice production have focused on paddy yield and have failed to account for the detrimental impact of high temperatures on milling quality outcomes, which ultimately determine edible (marketable rice yield and market value. Using genotype specific rice yield and milling quality data on six common rice varieties from Arkansas, USA, combined with on-site, half-hourly and daily temperature observations, we show a nonlinear effect of high-temperature stress exposure on yield and milling quality. A 1 °C increase in average growing season temperature reduces paddy yield by 6.2%, total milled rice yield by 7.1% to 8.0%, head rice yield by 9.0% to 13.8%, and total milling revenue by 8.1% to 11.0%, across genotypes. Our results indicate that failure to account for changes in milling quality leads to understatement of the impacts of high temperatures on rice production outcomes. These dramatic losses result from reduced paddy yield and increased percentages of chalky and broken kernels, which together decrease the quantity and market value of milled rice. Recently published estimates show paddy yield reductions of up to 10% across the major rice-producing regions of South and Southeast Asia due to rising temperatures. The results of our study suggest that the often-cited 10% figure underestimates the economic implications of climate change for rice producers, thus potentially threatening future food security for global rice producers and consumers.

Biogas production from high-yielding energy crops in boreal conditions

Energy Technology Data Exchange (ETDEWEB)

Seppala, M.

2013-11-01

In this thesis, the methane production potential of traditional and novel energy crops was evaluated in boreal conditions. The highest methane yield per hectare was achieved with maize (4 000-9 200 m{sup 3}CH{sub 4} ha{sup -1} a{sup -1}) and the second highest with brown knapweed (2 700-6 100 m{sup 3}CH{sub 4} ha{sup -1} a{sup -1}). Recently, the most feasible energy crop, grass, produced 1 200-3 600 m{sup 3}CH{sub 4} ha{sup -1} a{sup -1}. The specific methane yields of traditional and novel energy crops varied from 170-500 l kg{sup -1} volatile solid (VS). The highest specific methane yields were obtained with maize, while the novel energy crops were at a lower range. The specific methane yields decreased in the later harvest time with maize and brown knapweed, and the specific methane yield of the grasses decreased from the 1st to 2nd harvests. Maize and brown knapweed produced the highest total solid (TS) yields per hectare 13-23 tTS ha{sup -1}, which were high when compared with the TS yields of grasses (6-13 tTS ha{sup -1}). The feasibility of maize and brown knapweed in co-digestion with liquid cow manure, in continuously stirred tank reactors (CSTR), was evaluated. According to the CSTR runs, maize and brown knapweed are suitable feeds and have stable processes, producing the highest methane yields (organic loading rate 2 kgVS m{sup -3}d{sup -1}), with maize at 259 l kgVS{sup -1} and brown knapweed at 254 l kgVS{sup -1}. The energy balance (input/output) of the cultivation of the grasses, maize and brown knapweed was calculated in boreal conditions, and it was better when the digestate was used as a fertilizer (1.8-4.8 %) than using chemical fertilizers (3.7-16.2 %), whose production is the most energy demanding process in cultivation. In conclusion, the methane production of maize, grasses and novel energy crops can produce high methane yields and are suitable feeds for anaerobic digestion. The cultivation managements of maize and novel energy crops for

Numerical simulation of direct-drive ICF ignition in spherical geometry

International Nuclear Information System (INIS)

Yu Xiaojin

2006-01-01

The basic condition required for achieving central ignition is producing a hot spot with 10 keV temperature and 0.3 g/cm 2 surface density. Growth of hydrodynamic instability during deceleration phase will destroy the symmetric-drive, reduce the volume of central hot spot and make a harmful effect on ignition. Based on the LARED-S code, considering the thermonuclear reaction and α-particle heating, a numerical study of direct-drive ICF in spherical geometry is made. One-dimensional results agree well with the NIF ignition target designs, and show that the α-particle heating plays an important role in marginal ignition. Two-dimensional results show that the growth of hydrodynamic instability during deceleration phase makes a harmful effect on ignition. (authors)

Validating Inertial Confinement Fusion (ICF) predictive capability using perturbed capsules

Science.gov (United States)

Schmitt, Mark; Magelssen, Glenn; Tregillis, Ian; Hsu, Scott; Bradley, Paul; Dodd, Evan; Cobble, James; Flippo, Kirk; Offerman, Dustin; Obrey, Kimberly; Wang, Yi-Ming; Watt, Robert; Wilke, Mark; Wysocki, Frederick; Batha, Steven

2009-11-01

Achieving ignition on NIF is a monumental step on the path toward utilizing fusion as a controlled energy source. Obtaining robust ignition requires accurate ICF models to predict the degradation of ignition caused by heterogeneities in capsule construction and irradiation. LANL has embarked on a project to induce controlled defects in capsules to validate our ability to predict their effects on fusion burn. These efforts include the validation of feature-driven hydrodynamics and mix in a convergent geometry. This capability is needed to determine the performance of capsules imploded under less-than-optimum conditions on future IFE facilities. LANL's recently initiated Defect Implosion Experiments (DIME) conducted at Rochester's Omega facility are providing input for these efforts. Recent simulation and experimental results will be shown.

SAFIRE: A systems analysis code for ICF [inertial confinement fusion] reactor economics

International Nuclear Information System (INIS)

McCarville, T.J.; Meier, W.R.; Carson, C.F.; Glasgow, B.B.

1987-01-01

The SAFIRE (Systems Analysis for ICF Reactor Economics) code incorporates analytical models for scaling the cost and performance of several inertial confinement fusion reactor concepts for electric power. The code allows us to vary design parameters (e.g., driver energy, chamber pulse rate, net electric power) and evaluate the resulting change in capital cost of power plant and the busbar cost of electricity. The SAFIRE code can be used to identify the most attractive operating space and to identify those design parameters with the greatest leverage for improving the economics of inertial confinement fusion electric power plants

Health behaviour change theories: contributions to an ICF-based behavioural exercise therapy for individuals with chronic diseases.

Science.gov (United States)

Geidl, Wolfgang; Semrau, Jana; Pfeifer, Klaus

2014-01-01

The purpose of this perspective is (1) to incorporate recent psychological health behaviour change (HBC) theories into exercise therapeutic programmes, and (2) to introduce the International Classification of Functioning (ICF)-based concept of a behavioural exercise therapy (BET). Relevant personal modifiable factors of physical activity (PA) were identified based on three recent psychological HBC theories. Following the principles of intervention mapping, a matrix of proximal programme objectives specifies desirable parameter values for each personal factor. As a result of analysing reviews on behavioural techniques and intervention programmes of the German rehabilitation setting, we identified exercise-related techniques that impact the personal determinants. Finally, the techniques were integrated into an ICF-based BET concept. Individuals' attitudes, skills, emotions, beliefs and knowledge are important personal factors of PA behaviour. BET systematically addresses these personal factors by a systematic combination of adequate exercise contents with related behavioural techniques. The presented 28 intervention techniques serve as a theory-driven "tool box" for designing complex BET programmes to promote PA. The current paper highlights the usefulness of theory-based integrative research in the field of exercise therapy, offers explicit methods and contents for physical therapists to promote PA behaviour, and introduces the ICF-based conceptual idea of a BET. Implications for Rehabilitation Irrespective of the clients' indication, therapeutic exercise programmes should incorporate effective, theory-based approaches to promote physical activity. Central determinants of physical activity behaviour are a number of personal factors: individuals' attitudes, skills, emotions, beliefs and knowledge. Clinicians implementing exercise therapy should set it within a wider theoretical framework including the personal factors that influence physical activity. To increase

ANGARA-5-1 program development on superfast liner implosion for ICF physics study and basic research

Energy Technology Data Exchange (ETDEWEB)

Branitskij, A V; Grabovskij, E V; Fedulov, M V [Troitsk Inst. for Innovation and Thermonuclear Investigation, Troitsk (Russian Federation); and others

1997-12-31

A double liner concept is proposed of utilizing pulsed power in investigations of Inertial Confinement Fusion (ICF) and High Energy Density Physics. In this project, an external cylindrical plasma shell (liner) magnetically imploded in the generator diode collides with the internal one. Thermal X-ray radiation brought about by a high-velocity shock wave penetrates into the internal liner cavity and irradiates a spherical target. Investigations at the ANGARA-5 generator were concentrated on a comprehensive study of physical processes and the possibility of short radiation pulse generation. Soft X-ray radiation intensities of up to 3 TW/cm{sup 2} with a 3 ns rise time were obtained. It follows from the theoretical model that for the generator current higher than 15 MA the radiation intensity should be close to the ignition threshold and magnetized plasma instabilities should be suppressed. The paper reports on the concept and the theoretical and experimental results. (author). 8 refs.

Factors affecting the optimal performance of a high-yield pulping operation

Energy Technology Data Exchange (ETDEWEB)

Broderick, G [Noranda Technology Centre, Pointe-Claire, PQ (Canada); Paris, J [Ecole Polytechnique, Montreal, PQ (Canada); Valada, J L [Quebec Univ., Trois-Rivieres, PQ (Canada)

1995-06-01

Strategies for operating a chemical-mechanical pulp mill were investigated from data based on process models from some one hundred pilot scale pulping runs. Optimal values for 55 process and pulp quality variables have been calculated by applying a genetic algorithm search to a fuzzy model of the overall system. Best pulp quality was achieved and maintained when the chemical pretreatment was conducted at moderately low temperatures using a high SO{sub 2} concentration, which produced high sulphonation and high yield at the same time. By characterizing the quality of the pulp at the fibre level, optimization results were said to be more easily transferable to other high yield pulping systems. 19 refs., 6 tabs.

A neuropsychological rehabilitation program for patients with Multiple Sclerosis based on the model of the ICF.

Science.gov (United States)

Pusswald, Gisela; Mildner, Christa; Zebenholzer, Karin; Auff, Eduard; Lehrner, Johann

2014-01-01

Forty to sixty percent of MS patients suffer from cognitive impairments. Cognitive deficits are a great burden for patients affected. In particular they may lead to a reduced quality of life, loss of work and problems with the social environment. The aim of this study was to evaluate a specific neuropsychological rehabilitation program for MS patients according to the ICF to be able to meet more properly individual requirements on the therapy level of function as well as of activities and participation. Forty patients with MS were randomised in an intervention (IG) - and a control group (CG). The outcome measure of the IG, who started an intensive computer based home training of attention and attended psychological counselling was compared to the untrained CG. In specific domains of attention (simple and cued alertness and divided attention) significant group differences between CG and IG could be found. The IG reported an improvement of mental fatigue and retardation. These findings support the idea that a neuropsychological rehabilitation program, which based on the model of ICF, could improve cognitive impairment and could also have a positive influence of activities and participation.

An empirical exploration of the relations between the health components of the International Classification of Functioning, Disability and Health (ICF).

Science.gov (United States)

Perenboom, Rom J M; Wijlhuizen, Gert Jan; Garre, Francisca Galindo; Heerkens, Yvonne F; van Meeteren, Nico L U

2012-01-01

The aim of this study was to investigate the relations between the ICF components from a subjective perspective. Data on health condition and perceived functioning were collected among 2941 individuals with at least one chronic disease or disorder. Path analysis was used with perceived level of participation as the final denominator. Three models were tested: one with the number of chronic diseases and disorders as an indicator of health condition, one with perceived health as indicator of health condition, and one with perceived health as part of the personal factors. Although all models showed a good fit, the model with the best fit was that with perceived health as an indicator of health condition. From a patient's perspective, components of the ICF scheme appear to be associated with each other, with perceived health being the best indicator of the health condition.

Fusion with highly spin polarized HD and D2

International Nuclear Information System (INIS)

Honig, A.; Letzring, S.; Skupsky, S.

1993-01-01

Our experimental efforts over the past 5 years have been aimed at cazrying out ICF shots with spin-polarized 0 fuel. We successfully prepared polarized 0 in HD, and solved the problems of loading target shells with our carefully prepared isotopic -rnixt.l.l?-es, polarizing them so that the 0 polarization remains metastably frozen-in for about half a day, and carrying out the various cold transfer requirements at Syracuse, where the target is prepared, and at Rochester, where the cold target is inserted fusion chamber. Upon shooting the accurately positioned unpolarized high density cold target, no neutron yield was observed. Inspection inside the OMEGA tank after the shot indicated the absence of neutron yield was dus to mal-timing or insufficient retraction rate of OMEGA'S fast shroud mechanism, resulting in interception of at least 20 of the 24 laser beams by the faulty shroud. In spits of this, all alements of the complex experiment we originally undertook have been successfully demonstrated, and the cold retrieval concepts and methods we developed are being utilized on the ICF upgrades at Rochester and at Livermore. In addition to the solution of the interface problems, we obtained novel results on polymer shell characteristics at low temperatures, and continuation of these experiments is c = ently supported by KLUP. Extensive additional mappings were ca=ied out of nuclear spin relaxation rates of H and D in solid HD in the temperature-magnetic field rangs of 0.01 to 4.2K and 0 - 13 Tesla. New phenomena were discovered, such as association of impurity clustering with very low temperature motion, and inequality of the growth-rate and decay-rate of the magnetization

Using a profile of a modified Brief ICF Core Set for chronic widespread musculoskeletal pain with qualifiers for baseline assessment in interdisciplinary pain rehabilitation

Directory of Open Access Journals (Sweden)

Löfgren M

2013-08-01

Full Text Available Monika Löfgren,1,2 Jan Ekholm,2 Lisbet Broman,3 Philipe Njoo,1 Marie-Louise Schult1–3 1Department of Rehabilitation Medicine Stockholm, Danderyd University Hospital, Sweden; 2Karolinska Institutet, Division of Rehabilitation Medicine, Department of Clinical Sciences, Danderyd University Hospital, Stockholm, Sweden; 3Karolinska Institutet, Department of Neurobiology, Care Sciences and Society, Stockholm, Sweden Aim: To describe the use of a “workable” visual profile of function and disability, based on a modified Brief International Classification of Functioning, Disability and Health (ICF Core Set for chronic widespread pain, for initial assessments in a clinical setting of interdisciplinary pain rehabilitation teams. Method: The Brief ICF Core Set was slightly adapted to meet the needs of an interdisciplinary rehabilitation medicine team working in a university outpatient clinic and admitting patients referred from primary care. The Core Set categories were made measurable by means of eg, assessment instruments and clinical investigations. The resulting profile was given a workable shape to facilitate rapid understanding of the initial assessment outcome. Results: Individual patients showed different profiles of problems and resources, which facilitated individual rehabilitation planning. At the level of the study group, the profiles for the Core Set component Body Functions showed that most patients had severe impairment in the sensation of pain and exercise tolerance categories of function, but most had resources in the motivation and memory categories of function. Likewise, for the component Activities, most patients had limitations in lifting and carrying objects and remunerative employment, but most had resources in intimate relationships and family relationships. At first, the use of the modified Brief ICF Core Set in the team conference was rather time consuming, but after a couple of months of experience, the team assessment took

Comparison of biomolecule desorption yields for low and high energy primary ions

International Nuclear Information System (INIS)

Kamensky, I.; Hakansson, P.; Sundqvist, B.; McNeal, C.J.; MacFarlane, R.

1982-01-01

Ion induced desorption yields of molecular ions from samples of cesium iodide, glycylglycine, ergosterol, bleomycin and a trinucleoside diphosphate have been studied using primary beams of 54 MeV 63 Cu 9+ and 3 keV 133 Cs + . Mass analysis was performed with a time-of-flight technique. Each sample was studied with the same spectrometer for both low and high energy primary ions and without opening of the vacuum chamber in between the measurements. The results show that fast heavy ions give larger yields for all samples studied and that the yield ratios for high to low energy desorption increase with the mass of the sample molecule. (orig.)

Adolescents with disabilities participate in the shopping mall: facilitators and barriers framed according to the ICF.

Science.gov (United States)

Dahan-Oliel, Noémi; Shikako-Thomas, Keiko; Mazer, Barbara; Majnemer, Annette

2016-10-01

Community participation is restricted for youth with disabilities. The mall is an important gathering place where adolescents often socialise and develop community living skills, yet participation may be restricted. The aim of this study was to evaluate the facilitators and barriers to participation in a shopping mall through the perspectives of adolescents with disabilities. Semi-structured individual interviews were conducted with adolescents aged 12-19 years with a physical and/or sensory disability. Audio recordings were transcribed verbatim and coded following a template analysis using the International Classification of Functioning Disability and Health (ICF). Eleven youth (six females, mean age = 17.0 years) participated. Medical conditions included visual impairment, hearing impairment, cerebral palsy, hemiplegia, osteogenesis imperfecta and congenital amputations. Six themes were identified by the adolescents: what the shopping mall means to me, physical environment, transportation, social factors, attitudes and the person. The majority of themes mapped to the ICF's 'environmental factors'. Facilitators and barriers identified were either generic or disability-specific, implying that some modifications to shopping malls may be beneficial across disability types. Changes made to the physical, social and attitudinal environment are required to enable full participation of youth with disabilities within a shopping mall and other built environments of high public access. Implications for Rehabilitation The meaning of the shopping mall according to youth with disabilities includes socialisation, shopping, getting out of the home and employment. The majority of themes mapped to 'environmental factors' indicating that most obstacles to participation are caused by environmental barriers. Facilitators and barriers identified were either generic or disability-specific implying that some modifications to shopping malls may be beneficial across disability types

Analysis of equations of state for ICF

International Nuclear Information System (INIS)

Ogando, F.; Velarde, P.

1998-01-01

In the field of inertial confinement fusion (ICF), numerical simulation plays a very important role reproducing real results with a good accuracy. Once considered the needed simplificative approximations, it is obtained and equation system that has to be solved in a more or less complex way. Anyway these simulation codes have to fit the behaviour of real materials with the help of some flexible parameters. In the case of fluid dynamics, the key to fit the equation system to the real material behaviour are the equations of state (EOS) involved in the problem. This is why there is an actual need of using accurate data in order to obtain results that match the real behaviour of materials. Nowadays there are several available sources of real EOS data. These sources are based either in theoretical models fixed with experimental results or in analytical approximations to those models. In this article a comparative analysis is made between two of the most used EOS data sources in simulations. The aim of this work is to check the quality of these data that is commonly used and on which the accuracy of the results depend. (Author) 3 refs

Synthesis and characterization of poly (dihydroxybiphenyl borate) with high char yield for high-performance thermosetting resins

Science.gov (United States)

Wang, Shujuan; Xing, Xiaolong; Li, Jian; Jing, Xinli

2018-01-01

The objective of the current work is to synthesize novel boron-containing polymers with excellent thermal resistance, and reveal the structure and the reason for the high char yield. Thus, poly (dihydroxybiphenyl borate) (PDDB) with a more rigid molecular chain, was successfully synthesized using 4,4‧-dihydroxybiphenyl and boric acid. Structural characterizations of the prepared PDDB were performed via NMR, FTIR, XPS, and XRD analyses. The results reveal that PDDB consists of aromatic, Phsbnd Osbnd B and Bsbnd Osbnd B structures as well as a small number of boron hydroxyl and phenolic hydroxyl groups. PDDB shows good solubility in strong polar solvents, which is of great importance for the modification of thermosetting resins. TGA combined with DSC were employed to evaluate the thermal properties of PDDB, and increases in the glass transition temperature (Tg) and char yield were observed with increased boron content. Tg and char yield of PDDB (800 °C, nitrogen atmosphere) reached up to 219 °C and 66.5%, respectively. PDDB was extensively characterized during pyrolysis to reveal the high char yield of PDDB. As briefly discussed, the boron oxide and boron carbide that formed during pyrolysis play a crucial role in the high char yield of PDDB, which reduces the release of volatile carbon dioxide and carbon. This research suggests that PDDB has great potential as a novel modified agent for the improvement of the comprehensive performance of thermosetting resins to broaden their applicability in the field of advanced composites.

Low Back Pain in 17 Countries, a Rasch Analysis of the ICF Core Set for Low Back Pain

Science.gov (United States)

Roe, Cecilie; Bautz-Holter, Erik; Cieza, Alarcos

2013-01-01

Previous studies indicate that a worldwide measurement tool may be developed based on the International Classification of Functioning Disability and Health (ICF) Core Sets for chronic conditions. The aim of the present study was to explore the possibility of constructing a cross-cultural measurement of functioning for patients with low back pain…

Experimental techniques for measuring Rayleigh-Taylor instability in inertial confinement fusion (ICF)

Energy Technology Data Exchange (ETDEWEB)

Smalyuk, V A

2012-06-07

Rayleigh-Taylor (RT) instability is one of the major concerns in inertial confinement fusion (ICF) because it amplifies target modulations in both acceleration and deceleration phases of implosion, which leads to shell disruption and performance degradation of imploding targets. This article reviews experimental results of the RT growth experiments performed on OMEGA laser system, where targets were driven directly with laser light. RT instability was studied in the linear and nonlinear regimes. The experiments were performed in acceleration phase, using planar and spherical targets, and in deceleration phase of spherical implosions, using spherical shells. Initial target modulations consisted of 2-D pre-imposed modulations, and 2-D and 3-D modulations imprinted on targets by the non-uniformities in laser drive. In planar geometry, the nonlinear regime was studied using 3-D modulations with broadband spectra near nonlinear saturation levels. In acceleration-phase, the measured modulation Fourier spectra and nonlinear growth velocities are in good agreement with those predicted by Haan's model [Haan S W 1989 Phys. Rev. A 39 5812]. In a real-space analysis, the bubble merger was quantified by a self-similar evolution of bubble size distributions [Oron D et al 2001 Phys. Plasmas 8, 2883]. The 3-D, inner-surface modulations were measured to grow throughout the deceleration phase of spherical implosions. RT growth rates are very sensitive to the drive conditions, therefore they can be used to test and validate drive physics in hydrodynamic codes used to design ICF implosions. Measured growth rates of pre-imposed 2-D target modulations below nonlinear saturation levels were used to validate non-local thermal electron transport model in laser-driven experiments.

High green fodder yielding new grass varieties

OpenAIRE

C. Babu, K. Iyanar and A. Kalamani

2014-01-01

Two high biomass yielding forage grass varieties one each in Cumbu Napier hybrid and Guinea grass have been evolved at the Department of Forage Crops, Centre for Plant Breeding and Genetics, Tamil Nadu Agricultural University, Coimbatore and identified for release at national (All India) level as Cumbu Napier hybrid grass CO (BN) 5 and Guinea grass CO (GG) 3 during 2012 and 2013 respectively. Cumbu Napier hybrid grass CO (BN) 5 secured first rank at all national level with reference to green ...

The Impact of Speech Impairment in Early Childhood: Investigating Parents' and Speech-Language Pathologists' Perspectives Using the ICF-CY

Science.gov (United States)

McCormack, Jane; McLeod, Sharynne; Harrison, Linda J.; McAllister, Lindy

2010-01-01

Purpose: To explore the application of the Activities and Participation component of the International Classification of Functioning, Disability and Health - Children and Youth (ICF-CY, World Health Organization, 2007) as a framework for investigating the perceived impact of speech impairment in childhood. Method: A 32-item questionnaire based on…

Current Methods of Evaluating Speech-Language Outcomes for Preschoolers with Communication Disorders: A Scoping Review Using the ICF-CY

Science.gov (United States)

Cunningham, Barbara Jane; Washington, Karla N.; Binns, Amanda; Rolfe, Katelyn; Robertson, Bernadette; Rosenbaum, Peter

2017-01-01

Purpose: The purpose of this scoping review was to identify current measures used to evaluate speech-language outcomes for preschoolers with communication disorders within the framework of the International Classification of Functioning, Disability and Health-Children and Youth Version (ICF-CY; World Health Organization, 2007). Method: The review…

Development of the re-emit technique for ICF foot symmetry tuning for indirect drive ignition on NIF

Science.gov (United States)

Dewald, Eduard; Milovich, Jose; Edwards, John; Thomas, Cliff; Kalantar, Dan; Meeker, Don; Jones, Ogden

2007-11-01

Tuning of the the symmetry of the hohlraum radiation drive for the first 2 ns of the ICF pulse on NIF will be assessed by the re-emit technique [1] which measures the instantaneous x-ray drive asymmetry based on soft x-ray imaging of the re-emission of a high-Z sphere surrogate capsule. We will discuss the design of re-emit foot symmetry tuning measurements planned on NIF and their surrogacy for ignition experiments, including assessing the residual radiation asymmetry of the patches required for soft x-ray imaging. We will present the tuning strategy and expected accuracies based on calculations, analytical estimates and first results from scaled experiments performed at the Omega laser facility. [1] N. Delamater, G. Magelssen, A. Hauer, Phys. Rev. E 53, 5241 (1996.)

Mid-Season High-Resolution Satellite Imagery for Forecasting Site-Specific Corn Yield

Directory of Open Access Journals (Sweden)

Nahuel R. Peralta

2016-10-01

Full Text Available A timely and accurate crop yield forecast is crucial to make better decisions on crop management, marketing, and storage by assessing ahead and implementing based on expected crop performance. The objective of this study was to investigate the potential of high-resolution satellite imagery data collected at mid-growing season for identification of within-field variability and to forecast corn yield at different sites within a field. A test was conducted on yield monitor data and RapidEye satellite imagery obtained for 22 cornfields located in five different counties (Clay, Dickinson, Rice, Saline, and Washington of Kansas (total of 457 ha. Three basic tests were conducted on the data: (1 spatial dependence on each of the yield and vegetation indices (VIs using Moran’s I test; (2 model selection for the relationship between imagery data and actual yield using ordinary least square regression (OLS and spatial econometric (SPL models; and (3 model validation for yield forecasting purposes. Spatial autocorrelation analysis (Moran’s I test for both yield and VIs (red edge NDVI = NDVIre, normalized difference vegetation index = NDVIr, SRre = red-edge simple ratio, near infrared = NIR and green-NDVI = NDVIG was tested positive and statistically significant for most of the fields (p < 0.05, except for one. Inclusion of spatial adjustment to model improved the model fit on most fields as compared to OLS models, with the spatial adjustment coefficient significant for half of the fields studied. When selected models were used for prediction to validate dataset, a striking similarity (RMSE = 0.02 was obtained between predicted and observed yield within a field. Yield maps could assist implementing more effective site-specific management tools and could be utilized as a proxy of yield monitor data. In summary, high-resolution satellite imagery data can be reasonably used to forecast yield via utilization of models that include spatial adjustment to

Progress in high gain inertial confinement fusion

International Nuclear Information System (INIS)

Sun Jingwen

2001-01-01

The author reviews the progress in laboratory high gain inertial confinement fusion (ICF), including ICF capsule physics, high-energy-density science, inertial fusion energy, the National Ignition Facility (NIF) and its design of ignition targets and the peta watt laser breakthrough. High power laser, particle beam, and pulsed power facilities around the world have established the new laboratory field of high-energy- density plasma physics and have furthered development of inertial fusion. New capabilities such as those provided by high-brightness peta watt lasers have enabled the study of matter feasible in conditions previously unachievable on earth. Science and technology developed in inertial fusion research have found near-term commercial use and have enabled steady progress toward the goal of fusion ignition and high gain in the laboratory, and have opened up new fields of study for the 21 st century

Carbon isotope discrimination as a selection tool for high water use efficiency and high crop yields

International Nuclear Information System (INIS)

Kumarasinghe, K.S.; Kirda, C.; Bowen, G.D.; Zapata, F.; Awonaike, K.O.; Holmgren, E.; Arslan, A.; De Bisbal, E.C.; Mohamed, A.R.A.G.; Montenegro, A.

1996-01-01

Results of back-up research conducted at the FAO/IAEA Agriculture and Biotechnology Laboratory in support of the FAO/IAEA Co-ordinated Research Programme on the Use of Isotope Studies on Increasing and Stabilizing Plant Productivity in Low Phosphate and Semi-arid and Sub-humid Soils of the Tropics and Sub-tropics, are presented here. Neutron probe measurements confirmed the earlier reports of a strong correlation of Δ with grain yield and water use efficiency of wheat. High soil gypsum content and soil salinity, a wide spread problem in soils of arid and semi-arid climatic zones, do not interfere with the association of Δ with crop yields, provided plants are grown in similar soil water status and soil fertility level. Results of a glasshouse experiment using selected cowpea genotypes showed that Δ values measured at flowering stage positively correlated with total dry matter production and percent N 2 derived from atmosphere (%Ndfa), contributing to an earlier report from the laboratory that it may be possible to use Δ values for screening of leguminous crops for high N 2 fixation potential. 13 C isotope discrimination in the leaves of Gliricidia sepium was measured to examine if the technique could be extended to studies with trees. Results of a glasshouse experiment with 18 provenances of Gliricidia sepium showed highly significant correlations of Δ with total dry matter production, water use efficiency and total N accumulated through biological nitrogen fixation. Although the correlation of Δ with water use efficiency and dry matter yield are relatively clear and better understood, the correlation with nitrogen fixation still needs a closer examination under different environmental conditions and with different species. While 13 C isotope discrimination may be a valuable tool for identifying annual crops with high water use efficiency and high yield potential, it may be more attractive for tree species considering the long growth periods taken for trees

High yield neutron generators using the DD reaction

Energy Technology Data Exchange (ETDEWEB)

Vainionpaa, J. H.; Harris, J. L.; Piestrup, M. A.; Gary, C. K.; Williams, D. L.; Apodaca, M. D.; Cremer, J. T. [Adelphi technology, 2003 E. Bayshore Rd. 94061, Redwood City, CA (United States); Ji, Qing; Ludewigt, B. A. [Lawrence Berkeley National Lab, 1 Cyclotron Road, Berkeley, CA 94720 (United States); Jones, G. [G and J Enterprise, 1258 Quary Ln, Suite F, Pleasanton California 94566 (United States)

2013-04-19

A product line of high yield neutron generators has been developed at Adelphi technology inc. The generators use the D-D fusion reaction and are driven by an ion beam supplied by a microwave ion source. Yields of up to 5 Multiplication-Sign 10{sup 9} n/s have been achieved, which are comparable to those obtained using the more efficient D-T reaction. The microwave-driven plasma uses the electron cyclotron resonance (ECR) to produce a high plasma density for high current and high atomic ion species. These generators have an actively pumped vacuum system that allows operation at reduced pressure in the target chamber, increasing the overall system reliability. Since no radioactive tritium is used, the generators can be easily serviced, and components can be easily replaced, providing essentially an unlimited lifetime. Fast neutron source size can be adjusted by selecting the aperture and target geometries according to customer specifications. Pulsed and continuous operation has been demonstrated. Minimum pulse lengths of 50 {mu}s have been achieved. Since the generators are easily serviceable, they offer a long lifetime neutron generator for laboratories and commercial systems requiring continuous operation. Several of the generators have been enclosed in radiation shielding/moderator structures designed for customer specifications. These generators have been proven to be useful for prompt gamma neutron activation analysis (PGNAA), neutron activation analysis (NAA) and fast neutron radiography. Thus these generators make excellent fast, epithermal and thermal neutron sources for laboratories and industrial applications that require neutrons with safe operation, small footprint, low cost and small regulatory burden.

Optimization of components in high-yield synthesis of block copolymer-mediated gold nanoparticles

International Nuclear Information System (INIS)

Ray, Debes; Aswal, Vinod Kumar

2012-01-01

The optimization to achieve stable and high-yield gold nanoparticles in block copolymer-mediated synthesis has been examined. Gold nanoparticles are synthesized using block copolymer P85 in gold salt HAuCl 4 ·3H 2 O solution. This method usually has a very limited yield which does not simply increase with the increase in the gold salt concentration. We show that the yield can be enhanced by increasing the block copolymer concentration but is limited to the factor by which the concentration is increased. On the other hand, the presence of an additional reductant (trisodium citrate) in 1:1 molar ratio with gold salt enhances the yield by manyfold. In this case (with additional reductant), the stable and high-yield nanoparticles having size about 14 nm can be synthesized at very low block copolymer concentrations. These nanoparticles thus can be efficiently used for their application such as for adsorption of proteins.

Temperature-dependent tensile strength, surface roughness diagnostics, and magnetic support and positioning of polymer ICF shells. Final report, October 1, 1993--April 30, 1995

International Nuclear Information System (INIS)

Honig, A.

1995-01-01

During the course of this grant, we perfected emissivity and accommodation coefficient measurements on polymer ICF shells in the temperature range 250 to 350 K. Values for polystyrene shells are generally between 10 -2 and 10 -3 , which are very advantageous for ICF at cryogenic temperatures. Preliminary results on Br doped target shells indicate an accommodation coefficient, presumably associated with surface roughness on an atomic scale, about an order of magnitude larger than for ordinary polystyrene target shells. We also constructed apparatus with optical access for low temperature tensile strength and emissivity measurements, and made preliminary tests on this system. Magnetic shells were obtained both from GDP coating and from doping styrene with 10 manometer size ferromagnetic particles. The magnetic properties were measured through electron spin resonance (ESR). These experiments confirm the applicability of the Curie law, and establish the validity of using ESR measurements to determine shell temperature in the low temperature regime from 4K to 250K, thus complementing our presently accessible range. The high electron spin densities (> 10 20 /CM 3 ) suggest magnetic levitation should be feasible at cryogenic temperatures. This work has resulted in two conference presentations, a Technical Report, a paper to be published in Fusion Technology, and a Master's Thesis

Perspectives on the International Classification of Functioning, Disability, and Health: Child and Youth Version (ICF-CY) and Occupational Therapy Practice

Science.gov (United States)

Cramm, Heidi; Aiken, Alice B.; Stewart, Debra

2012-01-01

Classifying disability for children and youth has typically meant describing a diagnosis or developmental lag. The publication of the "International Classification of Functioning, Disability and Health: Child & Youth" version (ICF-CY) marks a global paradigm shift in the conceptualization and classification of childhood disability. Knowledge and…

High-resolution, regional-scale crop yield simulations for the Southwestern United States

Science.gov (United States)

Stack, D. H.; Kafatos, M.; Medvigy, D.; El-Askary, H. M.; Hatzopoulos, N.; Kim, J.; Kim, S.; Prasad, A. K.; Tremback, C.; Walko, R. L.; Asrar, G. R.

2012-12-01

Over the past few decades, there have been many process-based crop models developed with the goal of better understanding the impacts of climate, soils, and management decisions on crop yields. These models simulate the growth and development of crops in response to environmental drivers. Traditionally, process-based crop models have been run at the individual farm level for yield optimization and management scenario testing. Few previous studies have used these models over broader geographic regions, largely due to the lack of gridded high-resolution meteorological and soil datasets required as inputs for these data intensive process-based models. In particular, assessment of regional-scale yield variability due to climate change requires high-resolution, regional-scale, climate projections, and such projections have been unavailable until recently. The goal of this study was to create a framework for extending the Agricultural Production Systems sIMulator (APSIM) crop model for use at regional scales and analyze spatial and temporal yield changes in the Southwestern United States (CA, AZ, and NV). Using the scripting language Python, an automated pipeline was developed to link Regional Climate Model (RCM) output with the APSIM crop model, thus creating a one-way nested modeling framework. This framework was used to combine climate, soil, land use, and agricultural management datasets in order to better understand the relationship between climate variability and crop yield at the regional-scale. Three different RCMs were used to drive APSIM: OLAM, RAMS, and WRF. Preliminary results suggest that, depending on the model inputs, there is some variability between simulated RCM driven maize yields and historical yields obtained from the United States Department of Agriculture (USDA). Furthermore, these simulations showed strong non-linear correlations between yield and meteorological drivers, with critical threshold values for some of the inputs (e.g. minimum and

Spallation as a dominant source of pusher-fuel and hot-spot mix in inertial confinement fusion capsules

Science.gov (United States)

Orth, Charles D.

2016-02-01

We suggest that a potentially dominant but previously neglected source of pusher-fuel and hot-spot "mix" may have been the main degradation mechanism for fusion energy yields of modern inertial confinement fusion (ICF) capsules designed and fielded to achieve high yields—not hydrodynamic instabilities. This potentially dominant mix source is the spallation of small chunks or "grains" of pusher material into the fuel regions whenever (1) the solid material adjacent to the fuel changes its phase by nucleation and (2) this solid material spalls under shock loading and sudden decompression. We describe this mix mechanism, support it with simulations and experimental evidence, and explain how to eliminate it and thereby allow higher yields for ICF capsules and possibly ignition at the National Ignition Facility.

Ultra-broadband nonlinear saturable absorption of high-yield MoS2 nanosheets

Science.gov (United States)

Wei, Rongfei; Zhang, Hang; Hu, Zhongliang; Qiao, Tian; He, Xin; Guo, Qiangbing; Tian, Xiangling; Chen, Zhi; Qiu, Jianrong

2016-07-01

High-yield MoS2 nanosheets with strong nonlinear optical (NLO) responses in a broad near-infrared range were synthesized by a facile hydrothermal method. The observation of saturable absorption, which was excited by the light with photon energy smaller than the gap energy of MoS2, can be attributed to the enhancement of the hybridization between the Mo d-orbital and S p-orbital by the oxygen incorporation into MoS2. High-yield MoS2 nanosheets with high modulation depth and large saturable intensity generated a stable, passively Q-switched fiber laser pulse at 1.56 μm. The high output power of 1.08 mW can be attained under a very low pump power of 30.87 mW. Compared to recently reported passively Q-switched fiber lasers utilizing exfoliated MoS2 nanosheets, the efficiency of the laser for our passive Q-switching operation is larger and reaches 3.50%. This research may extend the understanding on the NLO properties of MoS2 and indicate the feasibility of the high-yield MoS2 nanosheets to passively Q-switched fiber laser effectively at low pump strengths.

The 'Golden' cLFV channels {mu} {yields} e{gamma} and {mu} {yields} eee - the high-intensity frontier

Energy Technology Data Exchange (ETDEWEB)

Kettle, Peter-Raymond, E-mail: peter-raymond.kettle@psi.ch [Paul Scherrer Institut PSI, Laboratory for Particle Physics (Switzerland)

2013-03-15

The muon as a laboratory for studying charged lepton-flavour violation (cLFV) has proven to be one of the most sensitive areas to probe for 'New Physics', due to the muon's copious production rate and relatively long lifetime. The search at the intensity frontier with precision-type experiments is complementary to the search for new particles at the high-energy frontier of TeV colliders. Of the three 'golden' muon channels: {mu} {yields} e{gamma}, {mu} {yields} 3e and {mu} {yields} econversion, an overview of the status of the coincidence experiments MEG, together with the latest results, which constitute the most stringent limit to date on this decay and the recently initiated Mu3e experiment, will be given.

Applicability of the International Classification of Functioning, Disability and Health (ICF for evaluation of children with cerebral palsy: a systematic review

Directory of Open Access Journals (Sweden)

Lílian de Fátima Dornelas

2014-12-01

Full Text Available Objective: To examine and synthesize the knowledge available in the literature on the instruments used in the perspective of functionality in children with cerebral palsy (CP, and to review the literature evaluating the instruments used for the implementation of the International Classification of Functioning, Disability and Health (ICF in children with CP. Method: The search was conducted in the electronic databases Google Scholar, PubMed, Lilacs and Medline, for articles published between January 2006 and December 2012, using the following keywords: cerebral palsy, child and assessment, combined with ICF. Ten articles were selected for analysis according to pre-established criteria. Results: The authors proposed tools that could standardize the assessment for classification of the components “Structure and function of the body”, “Activities and Participation” and “Environmental Factors”, proposing instruments such as Gross Motor Function Measure (GMFM, Pediatric Evaluation of Disability Inventory (PEDI, Goal Attainment Scaling (GAS, Manual Ability Classification System (MACS, Gross Motor Function Classification System (GMFCS, Physicians Rating Scale (PRS, Vineland Adaptive Behavior Scale (VABS, Pediatric Functional Independence Measure (Wee FIM, Gillette Functional Assessment Questionnaire (FAQ, Pediatric Quality of Life Inventory (PedsQL, Pediatric Outcomes Data Collection Instrument (PODCI, Gillette Gait Index (GGI, Energy Expenditure Index (EEI, and Vécu et Santé Perçue de l’Adolescent (VSP-A. Conclusion: The domains “Structure and function of the body” and “Activities and Participation” are often classified according to ICF in children with CP, and they present a variety of instrumentation for applicability of classification.

Neutronics in ICF reactor ''SENRI-I''

International Nuclear Information System (INIS)

Nakai, S.; Ido, S.; Yamanaka, C.

1983-01-01

The neutronic behavior of SENRI-I has been examined taking into account the effect of fuel rhoR and Pb tamper on the emitted neutron from micro-explosion. One dimensional neutron transport was calculated by ANISIN-JR code with the nuclear data GICX-40. The effect of beam ports on neutronics and neutron streaming was examined by the three dimensional Monte-Carlo calculation code MORSE-E with the same nuclear data. The emitted neutrons are softened noticeably by the increase of the compressed fuel rhoR and the thickness of Pb coating. The latter also multiplies the net neutron number from pellet. The energy deposition and temperature increase and its distribution in the blankets and structural elements were obtained as a function of neutron spectrum from pellet. As for the tritium breeding ratio, the softening of neutron has little effect because the decrease of breeding by 7 Li with softening is compensated by the increase of breeding by 6 Li. The breeding ratio was 1.678, 1.639 and 1.576 with 14 MeV neutron, rhoR=0.7, rhoR=3 and rhoR=6 respectively. Neutron shielding and streaming from beam ports were examined and the dose rate of final optical elements were calculated to estimate the life of mirror. All these results show the feasibility of SENRI-I as a long life, maintenance free ICF pulse reactor and motivate to go further investigation and design studies in detail. (author)

The ICF National Diagnostic Plan (NDP) 9/19/17

Energy Technology Data Exchange (ETDEWEB)

Kilkenny, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Richau, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Sangster, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Batha, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bell, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Larson, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bradley, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Leeper, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Herrmann, H. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bourdon, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hilsabeck, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-10-02

A major goal of the Stockpile Stewardship Program (SSP) is to deliver validated numerical models, benchmarked against experiments that address relevant and important issues and provide data that stress the codes and our understanding. DOENNSA has made significant investments in major facilities and high-performance computing to successfully execute the SSP. The more information obtained about the physical state of the plasmas produced, the more stringent the test of theories, models, and codes can be, leading to increased confidence in our predictive capability. To fully exploit the world-leading capabilities of the ICF program, a multi-year program to develop and deploy advanced diagnostics has been developed by the expert scientific community. To formalize these activities NNSA’s Acting Director for the Inertial Confinement Fusion Program directed the formation and duties of the National Diagnostics Working Group (NDWG) in a Memorandum 11/3/16 (Appendix A). The NDWG identified eight transformational diagnostics, shown in Table 1, that will provide unprecedented information from experiments in support of the SSP at NIF, Z and OMEGA. Table 1 shows how the missions of the SSP experiments including materials, complex hydrodynamics, radiation flow and effects and thermo-nuclear burn and boost will produce new observables, which will be measured using a variety of largely new diagnostic technologies used in the eight transformational diagnostics. The data provided by these diagnostics will validate and improve the physics contained within the SSP’s simulations and both uncover and quantify important phenomena that lie beyond our present understanding.

Progress in the pulsed power Inertial Confinement Fusion program

International Nuclear Information System (INIS)

Quintenz, J.P.; Matzen, M.K.; Mehlhorn, T.A.

1996-01-01

Pulsed power accelerators are being used in Inertial Confinement Fusion (ICF) research. In order to achieve our goal of a fusion yield in the range of 200 - 1000 MJ from radiation-driven fusion capsules, it is generally believed that ∼10 MJ of driver energy must be deposited within the ICF target in order to deposit ∼1 MJ of radiation energy in the fusion capsule. Pulsed power represents an efficient technology for producing both these energies and these radiation environments in the required short pulses (few tens of ns). Two possible approaches are being developed to utilize pulsed power accelerators in this effort: intense beams of light ions and z- pinches. This paper describes recent progress in both approaches. Over the past several years, experiments have successfully answered many questions critical to ion target design. Increasing the ion beam power and intensity are our next objectives. Last year, the Particle Beam Fusion Accelerator H (PBFA II) was modified to generate ion beams in a geometry that will be required for high yield applications. This 2048 modification has resulted in the production of the highest power ion beam to be accelerated from an extraction ion diode. We are also evaluating fast magnetically-driven implosions (z-pinches) as platforms for ICF ablator physics and EOS experiments. Z-pinch implosions driven by the 20 TW Saturn accelerator have efficiently produced high x- ray power (> 75 TW) and energy (> 400 kJ). Containing these x-ray sources within a hohlraum produces a unique large volume (> 6000 mm 3 ), long lived (>20 ns) radiation environment. In addition to studying fundamental ICF capsule physics, there are several concepts for driving ICF capsules with these x-ray sources. Progress in increasing the x-ray power on the Saturn accelerator and promise of further increases on the higher power PBFA II accelerator will be described

ICF and casemix models for healthcare funding: use of the WHO family of classifications to improve casemix.

Science.gov (United States)

Madden, Richard; Marshall, Ric; Race, Susan

2013-06-01

Casemix models for funding activity in health care and assessing performance depend on data based on uniformity of resource utilisation. It has long been an ideal to relate the measure of value more to patient outcome than output. A problem frequently expressed by clinicians is that measures of activity such as Functional Independence Measure (FIM) and Barthel Index scores may not sufficiently represent the aspirations of patients in many care programs. Firstly, the key features of the International Classification of Functioning, Disability and Health are outlined. Secondly, the use of ICF dimensions in Australia and other countries is reviewed. Thirdly, a broader set of domains with potential for casemix funding models and performance reporting is considered. In recent years, the ICF has provided a more developed set of domains against which outcome goals can be expressed. Additional dimensions could be used to supplement existing data. Instances of developments in this area are identified and their potential discussed. A well-selected set of data items representing the broader dimensions of outcome goals may provide the ability to more meaningfully and systematically measure the goals of both curative and rehabilitation care against which outcome should be measured. More information about patient goals may be needed.

Development of high yielding Soybean variety MACS 450 by using Kalitur mutant-MACS 111

International Nuclear Information System (INIS)

Raut, V.M.; Taware, S.P.; Halvankar, G.B.; Varghese, Philips

2000-01-01

A mutant variety -MACS 111 developed by treating seeds of indigenous black seeded 'Kalitur' variety with gamma irradiation + Ethyleneimine was used in development of high yielding varieties. MACS 450 a promising high yielding variety was selected from Bragg x MACS 111 cross by pedigree selection method. This variety gave the highest average seed yield in station trials (3422 kg/ha), coordinated breeding trials (2361 kg/ha) and varieties cum plant population trial (2215 kg/ha). On the basis of its performance in these trials it was released for commercial cultivation in Southern India. On all India basis, it also recorded the highest seed yield of 4076 kg/ha and 3582 kg/ha in Front line Demonstrations conducted on the farmers' field during 1998 and 1999 respectively. (author)

Improved performance of the Aurora KrF/ICF laser system

International Nuclear Information System (INIS)

Jones, J.E.; Czuchlewski, S.J.; Turner, T.P.; Watt, R.G.; Thomas, S.J.; Netz, D.A.; Tallman, C.R.; Figueira, J.F.

1990-01-01

This paper reports on Aurora the Los Alamos National Laboratory short pulse high power krypton-fluoride laser system. It serves as an end-to-end technology demonstration prototype for large scale UV laser systems for short wavelength inertial confinement fusion (ICF) research. The system employs optical angular multiplexing and serial amplification by electron-beam driven KrF laser amplifiers. The 1-5-ns pulse of the Aurora front end is split into ninety-six beams which are angularly and temporally multiplexed to produce a 480-ns pulse train for amplification by four KrF laser amplifiers. The largest amplifier, the large aperture module (LAM), has a 1-m square aperture and a gain length of 2 m. In the present system configuration half (forty-eight) of the amplified pulses are demultiplexed using different optical path lengths and delivered simultaneously to target. The system has not been optimized, and several near term improvements are expected to result in significant increases in both delivered energy and target irradiance. Removing the twelve calorimeters from the lens plate and allowing forty-eight beams to go to target will increase delivered energy by 33%. Relatively minor modifications to the front end should result in a 30% increase in system output energy. Replacement of damaged optics will increase transmission into the preamplifier by at least 25%. New optics and reduction of retro-pulses will allow the preamplifier stage gain to be increased by 50%

HIV/AIDS: use of the ICF in Brazil and South Africa--comparative data from four cross-sectional studies.

Science.gov (United States)

Myezwa, H; Buchalla, C M; Jelsma, J; Stewart, A

2011-03-01

Human immunodeficiency virus (HIV) is a serious disease which can be associated with various activity limitations and participation restrictions. The aim of this paper was to describe how HIV affects the functioning and health of people within different environmental contexts, particularly with regard to access to medication. Four cross-sectional studies, three in South Africa and one in Brazil, had applied the International Classification of Functioning, Disability and Health (ICF) as a classification instrument to participants living with HIV. Each group was at a different stage of the disease. Only two groups had had continuing access to antiretroviral therapy. The existence of these descriptive sets enabled comparison of the disability experienced by people living with HIV at different stages of the disease and with differing access to antiretroviral therapy. Common problems experienced in all groups related to weight maintenance, with two-thirds of the sample reporting problems in this area. Mental functions presented the most problems in all groups, with sleep (50%, 92/185), energy and drive (45%, 83/185), and emotional functions (49%, 90/185) being the most affected. In those on long-term therapy, body image affected 93% (39/42) and was a major problem. The other groups reported pain as a problem, and those with limited access to treatment also reported mobility problems. Cardiopulmonary functions were affected in all groups. Functional problems occurred in the areas of impairment and activity limitation in people at advanced stages of HIV, and more limitations occurred in the area of participation for those on antiretroviral treatment. The ICF provided a useful framework within which to describe the functioning of those with HIV and the impact of the environment. Given the wide spectrum of problems found, consideration could be given to a number of ICF core sets that are relevant to the different stages of HIV disease. Copyright © 2010 Chartered Society of

Mutation breeding of Bacillus subtilis YTB4 with high yield of ...

African Journals Online (AJOL)

DR TONUKARI NYEROVWO

2012-07-17

Jul 17, 2012 ... Helium-neon (He-Ne) laser irradiation is a highly efficient mutation breeding technology and is widely applied to various fields of biological science. Using Bacillus subtilis YTB4 with high yield of multienzyme complex as original strain, mutation breeding was carried out by He-Ne laser irradiation in.

ICF target technology at the Russian Federal Nuclear Center

International Nuclear Information System (INIS)

Veselov, A.V.; Drozhin, V.S.; Druzhinin, A.A.; Izgorodin, V.M.; Iiyushechkin, B.N.; Kirillov, G.A.; Komleva, G.V.; Korochkin, A.M.; Medvedev, E.F.; Nikolaev, G.P.; Pikulin, I.V.; Pinegin, A.V.; Punin, V.T.; Romaev, V.N.; Sumatokhin, V.L.; Tarasova, N.N.; Tachaev, G.V.; Cherkesova, I.N.

1995-01-01

The main effort of the ICF target fabrication group is support of the experiments performed on the 'ISKRA-4' and 'ISKRA-5' laser systems. The main types of targets used in these experiments are direct drive, inverted corona, and indirect drive. For production of direct drive targets, manufacturing techniques have been developed for both hollow glass and polystyrene microspheres. Hollow glass microspheres are fabricated by free-fall of liquid glass drops or dry gel in a 4 meter vertical kiln. These methods allow us to manufacture glass microspheres with diameters from 50 μm to 1 mm, wall thicknesses from 0.5 to 10 μm, and aspect ratios (radius/ wall) from 20 to 500. The microspheres have a thickness inhomogeneity less than 5% and non-sphericity less than 1%. Polystyrene microspheres are fabricated from polystyrene particles with a blowing agent in a similar vertical kiln. Polystyrene microspheres are fabricated with diameter up to 800 μm and wall thicknesses from 1 to 10 μm. 15 refs., 8 figs

The measurement and analysis of wavefront structure from large aperture ICF optics

International Nuclear Information System (INIS)

Wolfe, C.R.; Lawson, J.K.

1995-01-01

This paper discusses the techniques, developed over the past year, for high spatial resolution measurement and analysis of the transmitted and/or reflected wavefront of large aperture ICF optical components. Parts up to 400 mm x 750 mm have been measured and include: laser slabs, windows, KDP crystals and lenses. The measurements were performed using state-of-the-art commercial phase shifting interferometers at a wavelength of 633 μm. Both 1 and 2-D Fourier analysis have been used to characterize the wavefront; specifically the Power Spectral Density, (PSD), function was calculated. The PSDs of several precision optical components will be shown. The PSD(V) is proportional to the (amplitude) 2 of components of the Fourier frequency spectrum. The PSD describes the scattered intensity and direction as a function of scattering angle in the wavefront. The capability of commercial software is limited to 1-D Fourier analysis only. We are developing our own 2-D analysis capability in support of work to revise specifications for NIF optics. 2-D analysis uses the entire wavefront phase map to construct 2D PSD functions. We have been able to increase the signal-to-noise relative to 1-D and can observe very subtle wavefront structure

Differential gene expression at different stages of mesocarp development in high- and low-yielding oil palm.

Science.gov (United States)

Wong, Yick Ching; Teh, Huey Fang; Mebus, Katharina; Ooi, Tony Eng Keong; Kwong, Qi Bin; Koo, Ka Loo; Ong, Chuang Kee; Mayes, Sean; Chew, Fook Tim; Appleton, David R; Kulaveerasingam, Harikrishna

2017-06-21

The oil yield trait of oil palm is expected to involve multiple genes, environmental influences and interactions. Many of the underlying mechanisms that contribute to oil yield are still poorly understood. In this study, we used a microarray approach to study the gene expression profiles of mesocarp tissue at different developmental stages, comparing genetically related high- and low- oil yielding palms to identify genes that contributed to the higher oil-yielding palm and might contribute to the wider genetic improvement of oil palm breeding populations. A total of 3412 (2001 annotated) gene candidates were found to be significantly differentially expressed between high- and low-yielding palms at at least one of the different stages of mesocarp development evaluated. Gene Ontologies (GO) enrichment analysis identified 28 significantly enriched GO terms, including regulation of transcription, fatty acid biosynthesis and metabolic processes. These differentially expressed genes comprise several transcription factors, such as, bHLH, Dof zinc finger proteins and MADS box proteins. Several genes involved in glycolysis, TCA, and fatty acid biosynthesis pathways were also found up-regulated in high-yielding oil palm, among them; pyruvate dehydrogenase E1 component Subunit Beta (PDH), ATP-citrate lyase, β- ketoacyl-ACP synthases I (KAS I), β- ketoacyl-ACP synthases III (KAS III) and ketoacyl-ACP reductase (KAR). Sucrose metabolism-related genes such as Invertase, Sucrose Synthase 2 and Sucrose Phosphatase 2 were found to be down-regulated in high-yielding oil palms, compared to the lower yield palms. Our findings indicate that a higher carbon flux (channeled through down-regulation of the Sucrose Synthase 2 pathway) was being utilized by up-regulated genes involved in glycolysis, TCA and fatty acid biosynthesis leading to enhanced oil production in the high-yielding oil palm. These findings are an important stepping stone to understand the processes that lead to

High Titer and Yields Achieved with Novel, Low-Severity Pretreatment Strategy

Energy Technology Data Exchange (ETDEWEB)

2016-03-01

NREL researchers obtained high concentration sugar syrups in enzymatic hydrolysis that are fermentable to ethanol and other advanced biofuels and intermediate products at high yields. The novel DMR process is simpler and bypasses all severe pretreatment methods, thus reducing the environmental impact. The results are unprecedented. Researchers achieved a high concentration of sugars (230g/L of monomeric sugar and 270 g/L total sugar) and this low toxicity, highly fermentable syrup yielded 86 g/L ethanol (> 90 percent conversion). In addition, the lignin streams from this process can readily be converted to jet or renewable diesel blendstocks through a hydrodeoxygenation step. The NREL-developed, low severity DMR process may potentially replace higher severity chemical pretreatments and associated expensive reactors constructed of exotic alloys with a simpler process, using commercial-scale equipment commonly associated with the pulp and paper industry, to produce high concentration, low toxicity sugar streams and highly reactive lignin streams from non-food renewable biomass for biological and catalytic upgrading to advanced biofuels and chemicals. The simpler DMR process with black liquor recycling could reduce environmental and life-cycle impacts, and repurpose shuttered pulp and paper mills to help revitalize rural economies.

Robust high-yield ~1 TBq production of cyclotron based sodium [99mTc]pertechnetate.

Science.gov (United States)

Andersson, J D; Thomas, B; Selivanova, S V; Berthelette, E; Wilson, J S; McEwan, A J B; Gagnon, K

2018-03-02

This paper presents the irradiation and processing of high-current 100 Mo targets at the University of Alberta (UofA) in a GMP compliant setting. For purpose of comparison with a second production facility, additional studies at Centre Hospitalier Universitaire de Sherbrooke (CHUS) are also described. More than 70% of today's diagnostic radiopharmaceuticals are based on 99m Tc, however the conventional supply chain for obtaining 99m Tc is fragile. The aim of this work was to demonstrate reliable high yield production and processing of 99m Tc with medium-energy, high-current, cyclotrons. We used two cyclotrons (TR-24, Advanced Cyclotron Systems, Inc) for irradiations with 22 MeV or 24 MeV incident energy and 400 μA current up to a maximum of 6 h. The irradiated 100 Mo was dissolved using peroxide, basified using ammonium carbonate, and purified using a PEG-based solid phase extraction technique. High-yield productions with 22 MeV (400 μA, 6 h) yielded an average isolated [ 99m Tc]TcO 4 - yield of 878 GBq ± 99 GBq (23.7 Ci ± 2.7 Ci) decay corrected to EOB, n = 8 (isolated saturation yield: 4.36 ± 0.49 GBq/μA). Irradiations with 24 MeV (400 μA, 6 h) resulted in an average isolated [ 99m Tc]TcO 4 - yield of 993 GBq ± 100 GBq (26.8 Ci ± 2.7 Ci) decay corrected to EOB, n = 7 (isolated saturation yield: 4.97 ± 0.50 GBq/μA). These yields corresponds to 600-700 GBq (16-19 Ci) of [ 99m Tc]TcO 4 - at release (i.e. 3 hour post-EOB). For all tested batches, the QC results were within the recently published specifications in the European Pharmacopoeia. Reliable near-TBq production yields for 99m Tc can be obtained using medium-energy cyclotrons. This work presents evidence that medium-energy high-current cyclotrons can provide high yields of [ 99m Tc]TcO 4 - with radionuclidic impurities levels within the specifications of the existing European Pharmacopoeia monograph, indicating that this

Moderators, mediators, and bidirectional relationships in the International Classification of Functioning, Disability and Health (ICF) framework: An empirical investigation using a longitudinal design and Structural Equation Modeling (SEM).

Science.gov (United States)

Rouquette, Alexandra; Badley, Elizabeth M; Falissard, Bruno; Dub, Timothée; Leplege, Alain; Coste, Joël

2015-06-01

The International Classification of Functioning, Disability and Health (ICF) published in 2001 describes the consequences of health conditions with three components of impairments in body structures or functions, activity limitations and participation restrictions. Two of the new features of the conceptual model were the possibility of feedback effects between each ICF component and the introduction of contextual factors conceptualized as moderators of the relationship between the components. The aim of this longitudinal study is to provide empirical evidence of these two kinds of effect. Structural equation modeling was used to analyze data from a French population-based cohort of 548 patients with knee osteoarthritis recruited between April 2007 and March 2009 and followed for three years. Indicators of the body structure and function, activity and participation components of the ICF were derived from self-administered standardized instruments. The measurement model revealed four separate factors for body structures impairments, body functions impairments, activity limitations and participation restrictions. The classic sequence from body impairments to participation restrictions through activity limitations was found at each assessment time. Longitudinal study of the ICF component relationships showed a feedback pathway indicating that the level of participation restrictions at baseline was predictive of activity limitations three years later. Finally, the moderating role of personal (age, sex, mental health, etc.) and environmental factors (family relationships, mobility device use, etc.) was investigated. Three contextual factors (sex, family relationships and walking stick use) were found to be moderators for the relationship between the body impairments and the activity limitations components. Mental health was found to be a mediating factor of the effect of activity limitations on participation restrictions. Copyright © 2015 Elsevier Ltd. All rights

Recent advances in indirect drive ICF target physics at CEA

International Nuclear Information System (INIS)

Tassart, J.

2001-01-01

The objective of Target Physics Program at CEA is the achievement of ignition on the LMJ, a glass laser facility of 1.8 MJ which will be completed by 2008. It is composed of theoretical work, experimental work and numerical simulations. An important part of experimental studies is made in collaboration with U.S. DOE Laboratories: Lawrence Livermore National Laboratory, Los Alamos National Laboratory and the Laboratory for Laser Energetics at the University of Rochester. Experiments were performed on Phebus, NOVA (LLNL) and OMEGA (LLE) ; they included diagnostics developments. Recent efforts have been focused on Laser Plasma Interaction, hohlraum energetics, symmetry, ablator physics and hydrodynamic instabilities. Ongoing work prepare the first experiments on the LIL which is a prototype facility of the LMJ (8 of its 240 beams). They will be performed by 2002. Recent progress in ICF target physics allows us to precise laser specifications to achieve ignition with reasonable margin. (author)

Breeding high yielding varieties of pigeon pea, mungbean and black gram using induced mutations

International Nuclear Information System (INIS)

Pawar, S.E.; Wanjari, K.B.

1994-01-01

The present communication emphasis the developing of high yielding varieties of pigeon pea, mungbean and black gram using induced mutation with disease resistance in these crops. This would help in stabilisation of the higher yield potential

Mutation breeding of Bacillus subtilis YTB4 with high yield of ...

African Journals Online (AJOL)

Helium-neon (He-Ne) laser irradiation is a highly efficient mutation breeding technology and is widely applied to various fields of biological science. Using Bacillus subtilis YTB4 with high yield of multienzyme complex as original strain, mutation breeding was carried out by He-Ne laser irradiation in this study. Based on the ...

Yield Evaluation of Nutrient-rich Potato Clones in High Hill of Nepal

Directory of Open Access Journals (Sweden)

Binod Prasad Luitel

2017-05-01

Full Text Available A study was conducted to evaluate the yield of nutrient-rich potato clones in high-hill districts: Dolakha and Jumla of Nepal during the years 2013 and 2014, respectively. Fourteen potato clones were tested as on-station and on-farm experiments at both districts, and those fourteen clones were compared to ‘Lady Rosita’ and ‘Jumli Local’ respectively as the check varieties in the first year experiment, 2013. Eight promising clones were selected from the first year experiment, and were evaluated and compared with same local varieties in the consecutive year, 2014. Two clones namely; CIP 395112.32 (19.3 tha-1 and CIP 393073.179 (17.8 tha-1 exhibited superior marketable tuber yield than that of ‘Lady Rosita’(14.2 tha-1 in Dolakha and five CIP clones namely; 395112.32 (25.5 tha-1, 393073.179 (22.5 tha-1, 394611.112 (20.9 tha-1, 390478.9 (19.9 tha-1 and 395017.229 (17.0 tha-1 showed higher marketable tuber yield than ‘Jumli Local’(14.5 tha-1. Based on two years’ phenotypic and tuber yield result, clones CIP 395112.32 and CIP 393073.179 are recommended to potato growers at high hills of Nepal for commercial cultivation.

Reduced use of allogeneic platelets through high-yield perioperative autologous plateletpheresis and reinfusion.

Science.gov (United States)

Alberts, Melissa; Bandarenko, Nicholas; Gaca, Jeffrey; Lockhart, Evelyn; Milano, Carmelo; Alexander, Stanlin; Linder, Dean; Lombard, Frederick W; Welsby, Ian J

2014-05-01

Intraoperative autologous platelet (PLT) collection as part of a multimodal blood conservation program carries a Class IIa recommendation from the Societies of Thoracic Surgeons and Cardiovascular Anesthesiologists, but achieving a suitable PLT yield limits its application. A novel, autologous, intraoperative, high-yield plateletpheresis collection program was established and retrospectively analyzed to identify potential improvements over previously reported plateletpheresis protocols. Targeting complex cardiothoracic surgery patients without recent anti-PLT agents, thrombocytopenia, or severe anemia, the program aimed to achieve a PLT yield of at least one standard apheresis unit (3.0 × 10(11) ) within 60 to 90 minutes and using an automated plateletpheresis device (Trima, Terumo BCT). Anesthetized and invasively monitored patients underwent plateletpheresis via a large-bore, indwelling central line placed for the surgery. Collection-related data for quality control purposes and subsequent PLT transfusion requirements were analyzed and reported. Forty-two patients donated autologous PLTs between 2011 and 2012. PLT yield was 4.5 (3.9-5.0) × 10(11) , which significantly exceeds previously reported yields, and procedure duration was 53.2 (48.4-57.9) minutes. As anticipated, postcollection PLT count decreased from 268 (242-293) × 10(9) to 182 (163-201) × 10(9) /L; hypocalcemia was minimized by infusion of 1 g of CaCl2 . Autologous PLT yield was inversely correlated with allogeneic PLT use, and avoidance of allogeneic PLT transfusion was increased when the autologous yield was the equivalent of 2 or more apheresis units. High-yield, intraoperative autologous PLT collection is achievable using an automated plateletpheresis device. Initial experience shows a reduction in reliance on allogeneic PLTs for complex cardiothoracic surgery. © 2013 American Association of Blood Banks.

High yield silicon carbide pre-ceramic polymers

International Nuclear Information System (INIS)

Baney, R.H.

1982-01-01

Polysilanes which are substituted with (CH 3 ) 3 SiO-groups are useful for the preparation in high yields of fine grained silicon carbide ceramic materials. They consist of 0 to 60 mole % (CH 3 ) 2 Si units and 100 to 40 mole % CH 3 Si units, all Si valences not satisfied by CH 3 groups or Si atoms being directed to groups (CH 3 ) 3 SiO-, which siloxane groups amount to 23 to 61 weight % of the polysilane. They are prepared by reaction of the corresponding chloro- or bromo-methyl polysilanes with at least the stoichiometric amounts of (CH 3 ) 3 SiOSi(CH 3 ) 3 and water in the presence of a strong acid. (author)

Viscosity Control Experiment Feasibility Study

Energy Technology Data Exchange (ETDEWEB)

Morris, Heidi E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Bradley, Paul Andrew [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2018-01-31

Turbulent mix has been invoked to explain many results in Inertial Confinement Fusion (ICF) and High Energy Density (HED) physics, such as reduced yield in capsule implosions. Many ICF capsule implosions exhibit interfacial instabilities seeded by the drive shock, but it is not clear that fully developed turbulence results from this. Many simulations use turbulent mix models to help match simulation results to data, but this is not appropriate if turbulence is not present. It would be useful to have an experiment where turbulent mixing could be turned on or off by design. The use of high-Z dopants to modify viscosity and the resulting influence on turbulence is considered here. A complicating factor is that the plasma in some implosions can become strongly coupled, which makes the Spitzer expression for viscosity invalid. We first consider equations that cover a broad parameter space in temperature and density to address regimes for various experimental applications. Next, a previous shock-tube and other ICF experiments that investigate viscosity or use doping to examine the effects on yield are reviewed. How viscosity and dopants play a role in capsule yield depends on the region and process under consideration. Experiments and simulations have been performed to study the effects of viscosity on both the hot spot and the fuel/ablator mix. Increases in yield have been seen for some designs, but not all. We then discuss the effect of adding krypton dopant to the gas region of a typical OMEGA and a 2-shock NIF implosion to determine approximately the effect of adding dopant on the computed Reynolds number. Recommendations for a path forward for possible experiments using high-Z dopants to affect viscosity and turbulence are made.

Integrating the ICF with positive psychology: Factors predicting role participation for mothers with multiple sclerosis.

Science.gov (United States)

Farber, Ruth S; Kern, Margaret L; Brusilovsky, Eugene

2015-05-01

Being a mother has become a realizable life role for women with disabilities and chronic illnesses, including multiple sclerosis (MS). Identifying psychosocial factors that facilitate participation in important life roles-including motherhood-is essential to help women have fuller lives despite the challenge of their illness. By integrating the International Classification of Functioning, Disability, and Health (ICF) and a positive psychology perspective, this study examined how environmental social factors and positive personal factors contribute to daily role participation and satisfaction with parental participation. One hundred and 11 community-dwelling mothers with MS completed Ryff's Psychological Well-Being Scales, the Medical Outcome Study Social Support Survey, the Short Form-36, and the Parental Participation Scale. Hierarchical regression analyses examined associations between social support and positive personal factors (environmental mastery, self-acceptance, purpose in life) with daily role participation (physical and emotional) and satisfaction with parental participation. One-way ANOVAs tested synergistic combinations of social support and positive personal factors. Social support predicted daily role participation (fewer limitations) and greater satisfaction with parental participation. Positive personal factors contributed additional unique variance. Positive personal factors and social support synergistically predicted better function and greater satisfaction than either alone. Integrating components of the ICF and positive psychology provides a useful model for understanding how mothers with MS can thrive despite challenge or impairment. Both positive personal factors and environmental social factors were important contributors to positive role functioning. Incorporating these paradigms into treatment may help mothers with MS participate more fully in meaningful life roles. (c) 2015 APA, all rights reserved).

Studies on the apple trees grafted on high-position for cold-resistance and high yield by using radioactive isotope

International Nuclear Information System (INIS)

Yuan Zengyu

1985-01-01

The effect of high-position grafting of apple trees on cold-resistance and high yield was significant. The yields of varieties 'Huantaiping' etc. grafted on high posotion after 7 years were increased by up to 100 kg per plant in comparing with that grafted on low position. The photosynthetic products synthesized by high grafting trees and 32 P absorbed by roots were studied by measuring the radioactivity of 32 P and 14 C, and by autoradiograph. The distribution of nutrient in various organs was affected by graft union, and the accumulation of photosynthetic produts in fruit bearing portions was in favour of the differentiation of flowers and the formation of fruits

Plant growth analysis used as secondary traits in selection for high yield on groundnut

International Nuclear Information System (INIS)

Manshuri, A.G.; Nugrahaeni

1996-01-01

Groundnut growth and yield can be expressed as the product to solar radiation interception (Qi), conversion efficiency of radiation to total dry matter (Ek) and partitioning efficiency to economic yield (Ep) or harvest index. Groundnut genotypes differ in characters related to Qi, Ek and Ep, and the characters have the possibility to be used as secondary traits in selection for high yield. Extinction coefficient (k) and leaf area index (LAI) are the influential factors in increasing Qi. Variability in leaf size lead to the description of the existence of variability in k value within the genotypes under study. LAI three is the level necessary to attain 90 percent total radiation absorption in groundnut. An increased of LAI exceeding four would be inefficient for increasing the fraction of radiation absorption. Convertion efficiency of radiation to total dry matter (Ek) related to the rate of plant photosynthesis and respiration, inspite of the need study the field, however, the study was still limited. Harvest index can be used as a secondary trait to identify high yield genotypes. There was a positive correlation between pod yield and harvest index. An increased of harvest index by 1 percent caused an increased of dry pod as high as 0.365 g/plant. ICG 1697, ICGV 86844 and ICGV 87161 gave yield more than 3.5 t/ha, and their total dry matter (TDM) were 49.2, 52.5 and 40.7 g/plant, whereas their harvest indexes (HI) were 0.47, 0.46 and 0.55, respectively. Theoretically, improvement of the groundnut pod yield can be attained by using variety which has TDM 52.5 g/plant and HI 0.55. Using HI as secondary selection criteria, five genotypes were selected, i.e., G/C/LM-88-B-25 (HI 0.59), local Irian and local Lombok (HI 0.57), ICGV 87161 and LM/ICGV 87165-B-2-1 (HI 0.55). Two genotypes were selected for their high TDM, namely ICGV 86844 and LM/ICGV 87165-88-B-82 [in

Metabolic stress and inflammatory response in high-yielding, periparturient dairy cows.

Science.gov (United States)

Trevisi, E; Amadori, M; Cogrossi, S; Razzuoli, E; Bertoni, G

2012-10-01

Increased disease rates are commonly reported among high-yielding dairy cows in the transition period, extending from 3 weeks before to 3 weeks after calving, and characterized by the occurrence of an inflammatory response in terms of both positive and negative acute phase proteins (APP+ and APP-). To determine the above inflammatory response, the authors had developed the Liver Functionality Index (LFI), which defines the above condition on the basis of some APP- responses (albumin, cholesterol sensu stricto+bilirubin) during the first month of lactation. In this respect, low LFI values are associated to a high inflammatory response and vice versa. The relationship between LFI and inflammatory cytokine response was investigated from day -28 to day +28 with respect to calving in 12 periparturient dairy cows showing the six highest and six lowest LFI values within a cohort of 54 high-yielding dairy cows. The hypothesis being tested was that LFI and APP- on the whole could be used as readout of successful vs. non-successful adaptation to the transition period, with a strong association to disease occurrence. In fact, low LFI cows experienced many more disease cases (13 vs. 3 in high LFI Group) and related drug treatments till day +28. Interleukin-6 (IL-6) serum concentrations were always higher in low LFI cows (Pcows at risk in the transition period toward an improved farm management. Also, our study indicates that disease cases in periparturient, high-yielding dairy cows are correlated with signs of accentuated IL-6 response and other markers of inflammatory phenomena. These likely start in the late lactation period or around dry-off, as suggested by our prepartal data, and proceed at much greater levels after calving. Copyright © 2011 Elsevier Ltd. All rights reserved.

High yield of low-energy pions from a high-energy primary proton beam

International Nuclear Information System (INIS)

Bertin, A.; Capponi, S.; De Castro, S.

1987-01-01

This paper presents the results of the first measurement on the yield of pions with momentum smaller than 220 MeV/c, produced by a 300 GeV/c proton beam. The measurements, performed at the CERN super proton synchrotron using tungsten production targets of different lengths, are discussed referring to the possibility of extending to high-energy laboratories the access to fundamental research involving low-energy pions and muons

Hotspot ignition using a Z-pinch precursor plasma in a magneto-inertial ICF scheme

International Nuclear Information System (INIS)

Chittenden, J.P.; Vincent, P.; Jennings, C.A.; Ciardi, A.

2006-01-01

Precursor plasma flow is a common feature of wire array Z-pinches. The precursor flow represents a fraction of the mass of the array which arrives on the axis early in time and remains confined at high density by the inertia of further material bombarding the axis. Later on, the main implosion of the Z-pinch then compresses this precursor to substantially higher density. We show that if the same system can be generated with a Deuterium-Tritium plasma then the precursor provides an ideal target for a cylindrical magneto-inertial ICF scheme. The implosion of the DT Z-pinch produces a dense, low temperature shell which compressively heats the precursor target to high temperatures and tamps its expansion. The azimuthal magnetic field in the hotspot is sufficient to reduce the Larmor radius for the alpha particles to much less than the hotspot size, which dramatically reduces the pR required for ignition. A computational analysis of this approach is presented, including a study of the thermonuclear burn wave propagation. The robustness of the scheme with respect to instabilities, confinement time and drive parameters is examined. The results indicate that a high energy gain can be achieved using Z-pinches with 50-100 MA currents and a few hundred nanosecond rise-times. This work was partially supported by the U.S. Department of Energy through cooperative agreement DE-FC03-02NA00057

Induced high yielding mutant in green gram (Vigna radiata (L.) Wilczek)

International Nuclear Information System (INIS)

Pulivarthi, H.R.; Mary, T.N.

1987-01-01

Green gram (mungbean) plays a significant role in meeting the protein requirements in India, with its predominantly vegetarian population. Therefore, an attempt was made to induce desirable mutants. Dry seed of cultivar 'Pusa 105' were irradiated with gamma rays ranging from 10 to 50 krad. A high yielding mutant (Hy I) identified in the M 4 generation from 40 krad dose, has shown significant increases in the number of pods/plants, number of branches/plant, and yield/plant. Further work is in progress. Comparison of the mutant HyI with the parent cultivar Pusa 105 is given

A state-of-the-art plasma polymerization coater for ICF targets

International Nuclear Information System (INIS)

Devine, G.; Letts, S.; Cook, R.; Brusasco, R.

1992-01-01

Increasingly stringent demands on the characteristics of plasma polymer coatings for use in Inertial Confinement Fusion (ICF) experiments have created a need for a plasma Polymerization coating system with the capability of producing a wide variety of different types of coatings as well as one that can be used to do fundamental investigations of the process conditions leading to desirable films. We report on the construction and use of just such a coating instrument. We have recognized the usefulness of computer assisted process monitoring and control, currently being developed by the semiconductor industry, in designing our own, State-of-the-art plasma polymerization device. Our system is fully computer interfaced to provide the user with the capability of collecting system parameter data over the length of the deposition experiment. The system is also designed to allow for any degree of computer control of the deposition process in the future

Research Advances in High-Yielding Cultivation and Physiology of Super Rice

Directory of Open Access Journals (Sweden)

Jing FU

2012-09-01

Full Text Available In 1996, China launched a program to breed super rice or super hybrid rice by combining intersubspecific heterosis with ideal plant types. Today, approximately 80 super rice varieties have been released and some of them show high grain yields of 12–21 t/hm2 in field experiments. The main reasons for the high yields of super rice varieties, compared with those of conventional varieties, can be summarized as follows: more spikelets per panicle and larger sink size (number of spikelets per square meter; larger leaf area index, longer duration of green leaf, greater photosynthetic rate, higher lodging resistance, greater dry matter accumulation before the heading stage, greater remobilization of pre-stored carbohydrates from stems and leaves to grains during the grain-filling period; and larger root system and greater root activity. However, there are two main problems in super rice production: poor grain-filling of the later-flowering inferior spikelets (in contrast to earlier-flowering superior spikelets, and low and unstable seed-setting rate. Here, we review recent research advances in the crop physiology of super rice, focusing on biological features, formation of yield components, and population quality. Finally, we suggest further research on crop physiology of super rice.

High Photoluminescence Quantum Yield in Band Gap Tunable Bromide Containing Mixed Halide Perovskites.

Science.gov (United States)

Sutter-Fella, Carolin M; Li, Yanbo; Amani, Matin; Ager, Joel W; Toma, Francesca M; Yablonovitch, Eli; Sharp, Ian D; Javey, Ali

2016-01-13

Hybrid organic-inorganic halide perovskite based semiconductor materials are attractive for use in a wide range of optoelectronic devices because they combine the advantages of suitable optoelectronic attributes and simultaneously low-cost solution processability. Here, we present a two-step low-pressure vapor-assisted solution process to grow high quality homogeneous CH3NH3PbI3-xBrx perovskite films over the full band gap range of 1.6-2.3 eV. Photoluminescence light-in versus light-out characterization techniques are used to provide new insights into the optoelectronic properties of Br-containing hybrid organic-inorganic perovskites as a function of optical carrier injection by employing pump-powers over a 6 orders of magnitude dynamic range. The internal luminescence quantum yield of wide band gap perovskites reaches impressive values up to 30%. This high quantum yield translates into substantial quasi-Fermi level splitting and high "luminescence or optically implied" open-circuit voltage. Most importantly, both attributes, high internal quantum yield and high optically implied open-circuit voltage, are demonstrated over the entire band gap range (1.6 eV ≤ Eg ≤ 2.3 eV). These results establish the versatility of Br-containing perovskite semiconductors for a variety of applications and especially for the use as high-quality top cell in tandem photovoltaic devices in combination with industry dominant Si bottom cells.

Evaluation of the body condition of high yielding cows

OpenAIRE

Grubić G.; Novaković Ž.; Aleksić S.; Sretenović Lj.; Pantelić V.; Ostojić-Andrić D.

2009-01-01

Problems which relate to production, health and reproduction in herds of high yielding cows very often occur due to insufficient knowledge and monitoring of energy reserves in cow organisms. Many researches and practical experiences in this field indicate significant relation between body condition and achieved results in production. Body condition of heads of cattle in certain stages of production cycle is important parameter of applied nutrition, but also entire technological procedure. In ...

Dynamics of a Z Pinch X Ray Source for Heating ICF Relevant Hohlraums to 120-160eV

Energy Technology Data Exchange (ETDEWEB)

SANFORD,THOMAS W. L.; OLSON,RICHARD E.; MOCK,RAYMOND CECIL; CHANDLER,GORDON A.; LEEPER,RAMON J.; NASH,THOMAS J.; RUGGLES,LAURENCE E.; SIMPSON,WALTER W.; STRUVE,KENNETH W.; PETERSON,D.L.; BOWERS,R.L.; MATUSKA,W.

2000-07-10

A z-pinch radiation source has been developed that generates 60 {+-} 20 KJ of x-rays with a peak power of 13 {+-} 4 TW through a 4-mm diameter axial aperture on the Z facility. The source has heated NIF (National Ignition Facility)-scale (6-mm diameter by 7-mm high) hohlraums to 122 {+-} 6 eV and reduced-scale (4-mm diameter by 4-mm high) hohlraums to 155 {+-} 8 eV -- providing environments suitable for indirect-drive ICF (Inertial Confinement Fusion) studies. Eulerian-RMHC (radiation-hydrodynamics code) simulations that take into account the development of the Rayleigh-Taylor instability in the r-z plane provide integrated calculations of the implosion, x-ray generation, and hohlraum heating, as well as estimates of wall motion and plasma fill within the hohlraums. Lagrangian-RMHC simulations suggest that the addition of a 6 mg/cm{sup 3} CH{sub 2} fill in the reduced-scale hohlraum decreases hohlraum inner-wall velocity by {approximately}40% with only a 3--5% decrease in peak temperature, in agreement with measurements.

Dynamics of a Z Pinch X Ray Source for Heating ICF Relevant Hohlraums to 120-160eV

International Nuclear Information System (INIS)

Sanford, Thomas W.L.; Olson, Richard E.; Mock, Raymond Cecil; Chandler, Gordon A.; Leeper, Ramon J.; Nash, Thomas J.; Ruggles, Laurence E.; Simpson, Walter W.; Struve, Kenneth W.; Peterson, D.L.; Bowers, R.L.; Matuska, W.

2000-01-01

A z-pinch radiation source has been developed that generates 60 ± 20 KJ of x-rays with a peak power of 13 ± 4 TW through a 4-mm diameter axial aperture on the Z facility. The source has heated NIF (National Ignition Facility)-scale (6-mm diameter by 7-mm high) hohlraums to 122 ± 6 eV and reduced-scale (4-mm diameter by 4-mm high) hohlraums to 155 ± 8 eV -- providing environments suitable for indirect-drive ICF (Inertial Confinement Fusion) studies. Eulerian-RMHC (radiation-hydrodynamics code) simulations that take into account the development of the Rayleigh-Taylor instability in the r-z plane provide integrated calculations of the implosion, x-ray generation, and hohlraum heating, as well as estimates of wall motion and plasma fill within the hohlraums. Lagrangian-RMHC simulations suggest that the addition of a 6 mg/cm 3 CH 2 fill in the reduced-scale hohlraum decreases hohlraum inner-wall velocity by ∼40% with only a 3--5% decrease in peak temperature, in agreement with measurements

A pellet model of DT ignitor and DD fuel for an ICF reactor without tritium breeding blanket

International Nuclear Information System (INIS)

Ido, Shunji; Tazima, Teruhiko.

1983-01-01

A pellet concept of a DT ignitor and DD fuel for an ICF reactor without a tritium breeding blanket is analytically examined under the condition that T is bred through the DD reactions. There is the additional restriction that the tritium breeding ratio in a pellet is unity, including the in situ DT burn in the DD region. Model calculations show that sufficiently high pellet gain can be obtained in a DT-DD pellet, when fuel rhoR increases to --40 g/cm 2 and the fraction of energy released in the DD region becomes dominant. One-dimensional neutronics calculations carried out for a reference pellet model with rhoR --40 g/cm 2 show that the neutron heating in the compressed pellet model is evident and the total energy of the neutrons escaping from the pellet is reduced from --2000 MJ to 330 MJ for a microexplosion of --3000 MJ. (author)

Generation of an ICF syndrome model by efficient genome editing of human induced pluripotent stem cells using the CRISPR system.

Science.gov (United States)

Horii, Takuro; Tamura, Daiki; Morita, Sumiyo; Kimura, Mika; Hatada, Izuho

2013-09-30

Genome manipulation of human induced pluripotent stem (iPS) cells is essential to achieve their full potential as tools for regenerative medicine. To date, however, gene targeting in human pluripotent stem cells (hPSCs) has proven to be extremely difficult. Recently, an efficient genome manipulation technology using the RNA-guided DNase Cas9, the clustered regularly interspaced short palindromic repeats (CRISPR) system, has been developed. Here we report the efficient generation of an iPS cell model for immunodeficiency, centromeric region instability, facial anomalies syndrome (ICF) syndrome using the CRISPR system. We obtained iPS cells with mutations in both alleles of DNA methyltransferase 3B (DNMT3B) in 63% of transfected clones. Our data suggest that the CRISPR system is highly efficient and useful for genome engineering of human iPS cells.

Z-pinch implosion for ICF physics study on Angara-5-1

International Nuclear Information System (INIS)

Branitsky, A. V.; Fedulov, M. V.; Grabovsky, E. V.; Nedoseev, S. L.; Olejinik, G. M.; Smirnov, V. P.; Zakharov, S. V.

1997-01-01

Recent development of soft X-ray sources based on super-fast Z-pinch implosion has demonstrated the great promise of pulsed power for ICF physics study. The main direction of the 'Angara-5-1' program is oriented toward using the double liner scheme to confine radiation inside a cavity in order to enhance its intensity significantly. Collision of the external liner shell onto the inner leads to radiation penetration through the inner liner and a decrease in the radiation pulse duration to 3-5 ns. Testing this scheme on 'Angara-5-1' with current 3.5-5 MA demonstrates a flux intensity up to 3 TW/cm 2 . In spite of the fact that results of the experiment and a 1D-simulation are close, there are many issues with external liner stability during current sheath formation and implosion. Recent experimental efforts on Angara-5-1 focused on the 'cold start' problem and on the Rayleigh-Taylor instability for thick (gas-puff) and thin (doped foam) shells. Preionization makes the liner's plasma more homogeneous. The method also works in a plasma focus, according to the first results of a joint Polish-Russian experiment. A high current convolute increases ANGARA-5's load current from about 4 MA to 5.8 MA, which moves the radiation temperature toward the region of interest. We also outline a new approach to a generator intended to produce tens of MA, ANGARA-5-2

Knee posture during gait and global functioning post-stroke: a theoretical ICF framework using current measures in stroke rehabilitation

OpenAIRE

Neves Rosa, Marlene Cristina; Marques, Alda; Demain, Sara; Metcalf, Cheryl D.

2015-01-01

Purpose: To characterise the global functioning post-stroke in patients with normal knee posture (NKP) and abnormal knee posture (AKP) during loading-response. Methods: 35 people, 6 months post-stroke. with NKP and AKP were identified and assessed using clinical measures classified into the corresponding International Classification of Functioning, Disability and Health (ICF) domains: weight function (body mass index); muscle power (knee isometric strength); muscle tone (Modified Ashworth Sca...

A simple, high-yield, apparatus for NEG coating of vacuum beamline elements

International Nuclear Information System (INIS)

Ron, G; Oort, R; Lee, D

2010-01-01

Non-Evaporable Getter (NEG) materials are extremely useful in vacuum systems for achieving Ultra High Vacuum. Recently, these materials have been used to coat the inner surfaces of vacuum components, acting as an internal, passive, vacuum pump. We have constructed a low cost apparatus, which allows coating of very small diameter vacuum tubes, used as differential pumping stages. Despite the relative ease of construction, we are routinely able to achieve high coating yields. We further describe an improvement to our system, which is able to achieve the same yield, at an even lower complexity by using an easily manufactured permanent magnet arrangement. The designs described are extendible to virtually any combination of length and diameter of the components to be coated.

Development of High Yield Feedstocks and Biomass Conversion Technology for Renewable Energy

Energy Technology Data Exchange (ETDEWEB)

Hashimoto, Andrew G. [Univ. of Hawaii, Honolulu, HI (United States); Crow, Susan [Univ. of Hawaii, Honolulu, HI (United States); DeBeryshe, Barbara [Univ. of Hawaii, Honolulu, HI (United States); Ha, Richard [Hamakua Springs County Farms, Hilo, HI (United States); Jakeway, Lee [Hawaiian Commercial and Sugar Company, Puunene, HI (United States); Khanal, Samir [Univ. of Hawaii, Honolulu, HI (United States); Nakahata, Mae [Hawaiian Commercial and Sugar Company, Puunene, HI (United States); Ogoshi, Richard [Univ. of Hawaii, Honolulu, HI (United States); Shimizu, Erik [Univ. of Hawaii, Honolulu, HI (United States); Stern, Ivette [Univ. of Hawaii, Honolulu, HI (United States); Turano, Brian [Univ. of Hawaii, Honolulu, HI (United States); Turn, Scott [Univ. of Hawaii, Honolulu, HI (United States); Yanagida, John [Univ. of Hawaii, Honolulu, HI (United States)

2015-04-09

This project had two main goals. The first goal was to evaluate several high yielding tropical perennial grasses as feedstock for biofuel production, and to characterize the feedstock for compatible biofuel production systems. The second goal was to assess the integration of renewable energy systems for Hawaii. The project focused on high-yield grasses (napiergrass, energycane, sweet sorghum, and sugarcane). Field plots were established to evaluate the effects of elevation (30, 300 and 900 meters above sea level) and irrigation (50%, 75% and 100% of sugarcane plantation practice) on energy crop yields and input. The test plots were extensive monitored including: hydrologic studies to measure crop water use and losses through seepage and evapotranspiration; changes in soil carbon stock; greenhouse gas flux (CO₂, CH₄, and N₂O) from the soil surface; and root morphology, biomass, and turnover. Results showed significant effects of environment on crop yields. In general, crop yields decrease as the elevation increased, being more pronounced for sweet sorghum and energycane than napiergrass. Also energy crop yields were higher with increased irrigation levels, being most pronounced with energycane and less so with sweet sorghum. Daylight length greatly affected sweet sorghum growth and yields. One of the energy crops (napiergrass) was harvested at different ages (2, 4, 6, and 8 months) to assess the changes in feedstock characteristics with age and potential to generate co-products. Although there was greater potential for co-products from younger feedstock, the increased production was not sufficient to offset the additional cost of harvesting multiple times per year. The feedstocks were also characterized to assess their compatibility with biochemical and thermochemical conversion processes. The project objectives are being continued through additional support from the Office of Naval Research, and the Biomass Research and Development

High performance inertial fusion targets

International Nuclear Information System (INIS)

Nuckolls, J.H.; Bangerter, R.O.; Lindl, J.D.; Mead, W.C.; Pan, Y.L.

1977-01-01

Inertial confinement fusion (ICF) designs are considered which may have very high gains (approximately 1000) and low power requirements (<100 TW) for input energies of approximately one megajoule. These include targets having very low density shells, ultra thin shells, central ignitors, magnetic insulation, and non-ablative acceleration

The International Classification of Disability, Functioning and Health (ICF) - an example of research methods and language in describing 'social functioning' in medical research

DEFF Research Database (Denmark)

Rasmussen, Gitte

2016-01-01

Medical research ventures into the area of social life with a holistic approach to health and disabilities. However, the specific language developed for this kind of research in the 'ICF' model (adopted by the UN) loses sight of the very phenomena it aims at describing. By contrast, based...

Psychometric analyses to improve the Dutch ICF Activity Inventory.

Science.gov (United States)

Bruijning, Janna E; van Rens, Ger; Knol, Dirk; van Nispen, Ruth

2013-08-01

In the past, rehabilitation centers for the visually impaired used unstructured or semistructured methods to assess rehabilitation needs of their patients. Recently, an extensive instrument, the Dutch ICF Activity Inventory (D-AI), was developed to systematically investigate rehabilitation needs of visually impaired adults and to evaluate rehabilitation outcomes. The purpose of this study was to investigate the underlying factor structure and other psychometric properties to shorten and improve the D-AI. The D-AI was administered to 241 visually impaired persons who recently enrolled in a multidisciplinary rehabilitation center. The D-AI uses graded scores to assess the importance and difficulty of 65 rehabilitation goals. For high-priority goals (e.g., daily meal preparation), the difficulty of underlying tasks (e.g., read recipes, cut vegetables) was assessed. To reduce underlying task items (>950), descriptive statistics were investigated and factor analyses were performed for several goals. The internal consistency reliability and test-retest reliability of the D-AI were investigated by calculating Cronbach α and Cohen (weighted) κ. Finally, consensus-based discussions were used to shorten and improve the D-AI. Except for one goal, factor analysis model parameters were at least reasonable. Internal consistency reliability was satisfactory (range, 0.74 to 0.93). In total, 60% of the 65 goal importance items and 84.4% of the goal difficulty items showed moderate to almost perfect κ values (≥0.40). After consensus-based discussions, a new D-AI was produced, containing 48 goals and less than 500 tasks. The analyses were an important step in the validation process of the D-AI and to develop a more feasible assessment tool to investigate rehabilitation needs of visually impaired persons in a systematic way. The D-AI is currently implemented in all Dutch rehabilitation centers serving all visually impaired adults with various rehabilitation needs.

Comparison of physical activity questionnaires for the elderly with the International Classification of Functioning, Disability and Health (ICF)--an analysis of content.

Science.gov (United States)

Eckert, Katharina G; Lange, Martin A

2015-03-14

Physical activity questionnaires (PAQ) have been extensively used to determine physical activity (PA) levels. Most PAQ are derived from an energy expenditure-based perspective and assess activities with a certain intensity level. Activities with a moderate or vigorous intensity level are predominantly used to determine a person's PA level in terms of quantity. Studies show that the time spent engaging in moderate and vigorous intensity PA does not appropriately reflect the actual PA behavior of older people because they perform more functional, everyday activities. Those functional activities are more likely to be considered low-intense and represent an important qualitative health-promoting activity. For the elderly, functional, light intensity activities are of special interest but are assessed differently in terms of quantity and quality. The aim was to analyze the content of PAQ for the elderly. N = 18 sufficiently validated PAQ applicable to adults (60+) were included. Each item (N = 414) was linked to the corresponding code of the International Classification of Functioning, Disability and Health (ICF) using established linking rules. Kappa statistics were calculated to determine rater agreement. Items were linked to 598 ICF codes and 62 different ICF categories. A total of 43.72% of the codes were for sports-related activities and 14.25% for walking-related activities. Only 9.18% of all codes were related to household tasks. Light intensity, functional activities are emphasized differently and are underrepresented in most cases. Additionally, sedentary activities are underrepresented (5.55%). κ coefficients were acceptable for n = 16 questionnaires (0.48-1.00). There is a large inconsistency in the understandings of PA in elderly. Further research should focus (1) on a conceptual understanding of PA in terms of the behavior of the elderly and (2) on developing questionnaires that inquire functional, light intensity PA, as well as sedentary

Facile high-yield synthesis of polyaniline nanosticks with intrinsic stability and electrical conductivity.

Science.gov (United States)

Li, Xin-Gui; Li, Ang; Huang, Mei-Rong

2008-01-01

Chemical oxidative polymerization at 15 degrees C was used for the simple and productive synthesis of polyaniline (PAN) nanosticks. The effect of polymerization media on the yield, size, stability, and electrical conductivity of the PAN nanosticks was studied by changing the concentration and nature of the acid medium and oxidant and by introducing organic solvent. Molecular and supramolecular structure, size, and size distribution of the PAN nanosticks were characterized by UV/Vis and IR spectroscopy, X-ray diffraction, laser particle-size analysis, and transmission electron microscopy. Introduction of organic solvent is advantageous for enhancing the yield of PAN nanosticks but disadvantageous for formation of PAN nanosticks with small size and high conductivity. The concentration and nature of the acid medium have a major influence on the polymerization yield and conductivity of the nanosized PAN. The average diameter and length of PAN nanosticks produced with 2 M HNO(3) and 0.5 M H(2)SO(4) as acid media are about 40 and 300 nm, respectively. The PAN nanosticks obtained in an optimal medium (i.e., 2 M HNO(3)) exhibit the highest conductivity of 2.23 S cm(-1) and the highest yield of 80.7 %. A mechanism of formation of nanosticks instead of nanoparticles is proposed. Nanocomposite films of the PAN nanosticks with poly(vinyl alcohol) show a low percolation threshold of 0.2 wt %, at which the film retains almost the same transparency and strength as pure poly(vinyl alcohol) but 262 000 times the conductivity of pure poly(vinyl alcohol) film. The present synthesis of PAN nanosticks requires no external stabilizer and provides a facile and direct route for fabrication of PAN nanosticks with high yield, controllable size, intrinsic self-stability, strong redispersibility, high purity, and optimizable conductivity.

High-Yield Production of Levulinic Acid from Pretreated Cow Dung in Dilute Acid Aqueous Solution

Directory of Open Access Journals (Sweden)

Jialei Su

2017-02-01

Full Text Available Agricultural waste cow dung was used as feedstock for the production of a high value–added chemical levulinic acid (LA in dilute acid aqueous solutions. A high LA yield of 338.9 g/kg was obtained from the pretreated cow dung, which was much higher than that obtained from the crude cow dung (135 g/kg, mainly attributed to the breakage of the lignin fraction in the lignocellulose structure of the cow dung by potassium hydroxide (KOH pretreatment, and thus enhanced the accessibility of cow dung to the acid sites in the catalytic reaction. Meanwhile, another value-added chemical formic acid could be obtained with a yield of ca. 160 g/kg in the process, implying a total production of ca. 500 g/kg yield for LA and formic acid from the pretreated cow dung with the proposed process. The developed process was shown to be tolerant to high initial substrate loading with a satisfied LA yield. This work provides a promising strategy for the value-increment utilization of liglocellulosic agricultural residues.

Single and nested tungsten-wire-array dynamics and applications to inertial confinement fusion

Science.gov (United States)

Cuneo, Michael

2005-10-01

Wire array z-pinches show great promise as x-ray sources for indirect-drive inertial confinement fusion (ICF). The double z-pinch hohlraum, for example, has produced capsule radiation drive symmetric to within 3%. This ICF concept will require that each of two 20-mm-diam arrays scale to x-ray powers ˜1 PW, to drive high-yield (>0.2 GJ) capsules to ignition. High-yield fusion will also require a temporally shaped radiation pulse to drive a low-entropy capsule implosion. Recently, improved understanding of high current (11-19 MA) single and nested wire-array dynamics has enabled significant progress towards these goals. As at lower currents, a single wire array (and both the outer and inner arrays of a nested system) shows a wire ablation phase, axial modulation of the ablation rate, a larger ablation rate for larger diameter wires, trailing mass and trailing current. These processes and others produce a broad mass profile that may impact the optimization of x-ray output for single and nested arrays. Our new insights into wire array physics have led to 20-mm-diam single and nested arrays with peak powers of 150-190 TW at implosion times of 55-90 ns, increased from 60-120 TW at 95-110 ns, improving power scaling. Radiation pulse shapes required for 3-shock isentropic compression of high-yield ICF capsules have also been demonstrated with nested wire arrays operating in current-transfer mode. In collaboration with: D.B. Sinars, R.A. Vesey, E.M. Waisman, W.A. Stygar, D.E. Bliss, S.V. Lebedev, J.P. Chittenden, P.V. Sasorov, R.W. Lemke, E.P. Yu, B.B. Afeyan, G.R. Bennett, M.G. Mazarakis, M.R. Lopez, M.E. Savage, J.L. Porter, T.A. Mehlhorn.

High performance inertial fusion targets

International Nuclear Information System (INIS)

Nuckolls, J.H.; Bangerter, R.O.; Lindl, J.D.; Mead, W.C.; Pan, Y.L.

1978-01-01

Inertial confinement fusion (ICF) target designs are considered which may have very high gains (approximately 1000) and low power requirements (< 100 TW) for input energies of approximately one megajoule. These include targets having very low density shells, ultra thin shells, central ignitors, magnetic insulation, and non-ablative acceleration

The Geriatric ICF Core Set reflecting health-related problems in community-living older adults aged 75 years and older without dementia : development and validation

NARCIS (Netherlands)

Spoorenberg, Sophie L. W.; Reijneveld, Sijmen A.; Middel, Berrie; Uittenbroek, Ronald J.; Kremer, Hubertus P. H.; Wynia, Klaske

2015-01-01

Purpose: The aim of the present study was to develop a valid Geriatric ICF Core Set reflecting relevant health-related problems of community-living older adults without dementia. Methods: A Delphi study was performed in order to reach consensus (70% agreement) on second-level categories from the

The influence of asymmetry on mix in direct-drive inertial confinement fusion experiments

International Nuclear Information System (INIS)

Christensen, C.R.; Wilson, D.C.; Barnes, Cris W.; Grim, G.P.; Morgan, G.L.; Wilke, M.D.; Marshall, F.J.; Glebov, V.Yu.; Stoeckl, C.

2004-01-01

The mix of shell material into the fuel of inertial confinement fusion (ICF) implosions is thought to be a major cause of the failure of most ICF experiments to achieve the fusion yield predicted by computer codes. Implosion asymmetry is a simple measurable quantity that is expected to affect the mix. In order to measure the coupling of asymmetry to mix in ICF implosions, we have performed experiments on the OMEGA laser [T. R. Boehly et al., Rev. Sci. Instrum. 66, 508 (1995)] that vary the energy of each of the sixty beams individually to achieve a given fraction of L2, the second-order Legendre polynomial. Prolate, symmetric, and oblate implosions resulted. Three different fill pressures were used. Simultaneous x-ray and neutron images were obtained. The experiments were modeled with a radiation/hydrodynamics code using the multi-fluid interpenetration mix model of Scannapieco and Cheng. It fits the data well with a single value of its one adjustable parameter (0.07±0.01). This agreement is demonstrated by neutron yield, x-ray images, neutron images, and ion temperatures. The degree of decline of the neutron yield with asymmetry at different fill pressures provides a hard constraint on ICF mix modeling

High-Yield Lithium-Injection Fusion-Energy (HYLIFE) reactor

International Nuclear Information System (INIS)

Blink, J.A.; Hogam, W.J.; Hovingh, J.; Meier, E.R.; Pitts, J.H.

1985-01-01

The High-Yield Lithium-Injection Fusion Energy (HYLIFE) concept to convent inertial confinement fusion energy into electric power has undergone intensive research and refinement at LLNL since 1978. This paper reports on the final HYLIFE design, focusing on five major areas: the HYLIFE reaction chamber (which includes neutronics, liquid-metal jet-array hydrocynamics, and structural design), supporting systems, primary steam system and balance of plant, safety and environmental protection, and costs. An annotated bibliography of reports applicable to HYLIFE is also provided. We conclude that HYLIFE is a particularly viable concept for the safe, clean production of electrical energy. The liquid-metal jet array, HYLIFE's key design feature, protects the surrounding structural components from x-rays, fusion fuel-pellet debris, neutron damage and activation, and high temperatures and stresses, allowing the structure to last for the plant's entire 30-year lifetime without being replaced. 127 refs., 18 figs

Effect of high oleic acid soybean on seed oil, protein concentration, and yield

Science.gov (United States)

Soybeans with high oleic acid content are desired by oil processors because of their improved oxidative stability for broader use in food, fuel and other products. However, non-GMO high-oleic soybeans have tended to have low seed yield. The objective of this study was to test non-GMO, high-oleic s...

Using absolute x-ray spectral measurements to infer stagnation conditions in ICF implosions

Science.gov (United States)

Patel, Pravesh; Benedetti, L. R.; Cerjan, C.; Clark, D. S.; Hurricane, O. A.; Izumi, N.; Jarrott, L. C.; Khan, S.; Kritcher, A. L.; Ma, T.; Macphee, A. G.; Landen, O.; Spears, B. K.; Springer, P. T.

2016-10-01

Measurements of the continuum x-ray spectrum emitted from the hot-spot of an ICF implosion can be used to infer a number thermodynamic properties at stagnation including temperature, pressure, and hot-spot mix. In deuterium-tritium (DT) layered implosion experiments on the National Ignition Facility (NIF) we field a number of x-ray diagnostics that provide spatial, temporal, and spectrally-resolved measurements of the radiated x-ray emission. We report on analysis of these measurements using a 1-D hot-spot model to infer thermodynamic properties at stagnation. We compare these to similar properties that can be derived from DT fusion neutron measurements. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

High-yield production of herbicidal thaxtomins and analogs in a nonpathogenic Streptomyces strain.

Science.gov (United States)

Jiang, Guangde; Zhang, Yucheng; Powell, Magan M; Zhang, Peilan; Zuo, Ran; Zhang, Yi; Kallifidas, Dimitrios; Tieu, Albert M; Luesch, Hendrik; Loria, Rosemary; Ding, Yousong

2018-03-30

Thaxtomins are virulence factors of most plant pathogenic Streptomyces strains. Due to their potent herbicidal activity, attractive environmental compatibility and inherent biodegradability, thaxtomins are key active ingredients of bioherbicides approved by the United States Environmental Protection Agency. However, the low yield of thaxtomins in native Streptomyces producers limits their wide agricultural applications. Here, we describe the high-yield production of thaxtomins in a heterologous host. The thaxtomin gene cluster from S. scabiei 87.22 was cloned and expressed in S. albus J1074 after chromosomal integration. The production of thaxtomins and nitro-tryptophan analogs were observed using LC-MS analysis. When culturing the engineered S. albus J1074 in the minimal medium TMDc, the yield of the most abundant and herbicidal analog, thaxtomin A, was 10 times higher than S. scabiei 87.22, and optimization of the medium resulted in the highest yield of thaxtomin analogs at about 222 mg/L. Further engineering of the thaxtomin biosynthetic gene cluster through gene deletion led to the production of multiple biosynthetic intermediates important to the chemical synthesis of new analogs. Additionally, the versatility of the thaxtomin biosynthetic system in S. albus J1074 was capitalized to produce one unnatural fluorinated analog 5-F-thaxtomin A, whose structure was elucidated by a combination of MS and 1D and 2D NMR analyses. Natural and unnatural thaxtomins demonstrated potent herbicidal activity in radish seedling assays. These results indicated that S. albus J1074 has the potential to produce thaxtomins and thereof with high yield, fostering their agricultural applications. IMPORTANCE Thaxtomins are agriculturally valuable herbicidal natural products but the productivity of native producers is limiting. Heterologous expression of thaxtomin gene cluster in S. albus J1074 resulted in the highest yield of thaxtomins ever reported, representing a significant leap

On the Utility of Antiprotons as Drivers for Inertial Confinement Fusion

Energy Technology Data Exchange (ETDEWEB)

Perkins, L J; Orth, C D; Tabak, M

2003-10-20

By contrast to the large mass, complexity and recirculating power of conventional drivers for inertial confinement fusion (ICF), antiproton annihilation offers a specific energy of 90MJ/{micro}g and thus a unique form of energy packaging and delivery. In principle, antiproton drivers could provide a profound reduction in system mass for advanced space propulsion by ICF. We examine the physics underlying the use of antiprotons ({bar p}) to drive various classes of high-yield ICF targets by the methods of volumetric ignition, hotspot ignition and fast ignition. The useable fraction of annihilation deposition energy is determined for both {bar p}-driven ablative compression and {bar p}-driven fast ignition, in association with 0-D and 1-D target burn models. Thereby, we deduce scaling laws for the number of injected antiprotons required per capsule, together with timing and focal spot requirements. The kinetic energy of the injected antiproton beam required to penetrate to the desired annihilation point is always small relative to the deposited annihilation energy. We show that heavy metal seeding of the fuel and/or ablator is required to optimize local deposition of annihilation energy and determine that a minimum of {approx}3x10{sup 15} injected antiprotons will be required to achieve high yield (several hundred megajoules) in any target configuration. Target gains - i.e., fusion yields divided by the available p - {bar p} annihilation energy from the injected antiprotons (1.88GeV/{bar p}) - range from {approx}3 for volumetric ignition targets to {approx}600 for fast ignition targets. Antiproton-driven ICF is a speculative concept, and the handling of antiprotons and their required injection precision - temporally and spatially - will present significant technical challenges. The storage and manipulation of low-energy antiprotons, particularly in the form of antihydrogen, is a science in its infancy and a large scale-up of antiproton production over present supply

On the Utility of Antiprotons as Drivers for Inertial Confinement Fusion

International Nuclear Information System (INIS)

Perkins, L J; Orth, C D; Tabak, M

2003-01-01

By contrast to the large mass, complexity and recirculating power of conventional drivers for inertial confinement fusion (ICF), antiproton annihilation offers a specific energy of 90MJ/(micro)g and thus a unique form of energy packaging and delivery. In principle, antiproton drivers could provide a profound reduction in system mass for advanced space propulsion by ICF. We examine the physics underlying the use of antiprotons ((bar p)) to drive various classes of high-yield ICF targets by the methods of volumetric ignition, hotspot ignition and fast ignition. The useable fraction of annihilation deposition energy is determined for both (bar p)-driven ablative compression and (bar p)-driven fast ignition, in association with 0-D and 1-D target burn models. Thereby, we deduce scaling laws for the number of injected antiprotons required per capsule, together with timing and focal spot requirements. The kinetic energy of the injected antiproton beam required to penetrate to the desired annihilation point is always small relative to the deposited annihilation energy. We show that heavy metal seeding of the fuel and/or ablator is required to optimize local deposition of annihilation energy and determine that a minimum of ∼3x10 15 injected antiprotons will be required to achieve high yield (several hundred megajoules) in any target configuration. Target gains - i.e., fusion yields divided by the available p - (bar p) annihilation energy from the injected antiprotons (1.88GeV/(bar p)) - range from ∼3 for volumetric ignition targets to ∼600 for fast ignition targets. Antiproton-driven ICF is a speculative concept, and the handling of antiprotons and their required injection precision - temporally and spatially - will present significant technical challenges. The storage and manipulation of low-energy antiprotons, particularly in the form of antihydrogen, is a science in its infancy and a large scale-up of antiproton production over present supply methods would be

On the utility of antiprotons as drivers for inertial confinement fusion

International Nuclear Information System (INIS)

Perkins, L. John; Orth, Charles D.; Tabak, Max

2004-01-01

In contrast to the large mass, complexity and recirculating power of conventional drivers for inertial confinement fusion (ICF), antiproton annihilation offers a specific energy of 90 MJ μg -1 and thus a unique form of energy packaging and delivery. In principle, antiproton drivers could provide a profound reduction in system mass for advanced space propulsion by ICF. We examine the physics underlying the use of antiprotons (p-bar) to drive various classes of high-yield ICF targets by the methods of volumetric ignition, hotspot ignition and fast ignition. The useable fraction of annihilation deposition energy is determined for both p-bar-driven ablative compression and p-bar-driven fast ignition, in association with zero- and one-dimensional target burn models. Thereby, we deduce scaling laws for the number of injected antiprotons required per capsule, together with timing and focal spot requirements. The kinetic energy of the injected antiproton beam required to penetrate to the desired annihilation point is always small relative to the deposited annihilation energy. We show that heavy metal seeding of the fuel and/or ablator is required to optimize local deposition of annihilation energy and determine that a minimum of ∼3 x 10 15 injected antiprotons will be required to achieve high yield (several hundred megajoules) in any target configuration. Target gains-i.e. fusion yields divided by the available p-p-bar annihilation energy from the injected antiprotons (1.88 GeV/p-bar)-range from ∼3 for volumetric ignition targets to ∼600 for fast ignition targets. Antiproton-driven ICF is a speculative concept, and the handling of antiprotons and their required injection precision - temporally and spatially - will present significant technical challenges. The storage and manipulation of low-energy antiprotons, particularly in the form of antihydrogen, is a science in its infancy and a large scale-up of antiproton production over present supply methods would be

Differential metabolite profiles during fruit development in high-yielding oil palm mesocarp.

Directory of Open Access Journals (Sweden)

Huey Fang Teh

Full Text Available To better understand lipid biosynthesis in oil palm mesocarp, in particular the differences in gene regulation leading to and including de novo fatty acid biosynthesis, a multi-platform metabolomics technology was used to profile mesocarp metabolites during six critical stages of fruit development in comparatively high- and low-yielding oil palm populations. Significantly higher amino acid levels preceding lipid biosynthesis and nucleosides during lipid biosynthesis were observed in a higher yielding commercial palm population. Levels of metabolites involved in glycolysis revealed interesting divergence of flux towards glycerol-3-phosphate, while carbon utilization differences in the TCA cycle were proven by an increase in malic acid/citric acid ratio. Apart from insights into the regulation of enhanced lipid production in oil palm, these results provide potentially useful metabolite yield markers and genes of interest for use in breeding programmes.

Generation of an ICF Syndrome Model by Efficient Genome Editing of Human Induced Pluripotent Stem Cells Using the CRISPR System

Directory of Open Access Journals (Sweden)

Izuho Hatada

2013-09-01

Full Text Available Genome manipulation of human induced pluripotent stem (iPS cells is essential to achieve their full potential as tools for regenerative medicine. To date, however, gene targeting in human pluripotent stem cells (hPSCs has proven to be extremely difficult. Recently, an efficient genome manipulation technology using the RNA-guided DNase Cas9, the clustered regularly interspaced short palindromic repeats (CRISPR system, has been developed. Here we report the efficient generation of an iPS cell model for immunodeficiency, centromeric region instability, facial anomalies syndrome (ICF syndrome using the CRISPR system. We obtained iPS cells with mutations in both alleles of DNA methyltransferase 3B (DNMT3B in 63% of transfected clones. Our data suggest that the CRISPR system is highly efficient and useful for genome engineering of human iPS cells.

Sputtering yields of carbon based materials under high particle flux with low energy

Science.gov (United States)

Nakamura, K.; Nagase, A.; Dairaku, M.; Akiba, M.; Araki, M.; Okumura, Y.

1995-04-01

A new ion source which can produce high particle flux beams at low energies has been developed. This paper presents preliminary results on the sputtering yield of the carbon fiber reinforced composites (CFCs) measured with the new ion source. The sputtering yields of 1D and 2D CFCs, which are candidate materials for the divertor armour tiles, have been measured by the weight loss method under the hydrogen and deuterium particle fluxes of 2 ˜ 7 × 10 20/m 2 s at 50 ˜ 150 eV. Preferential sputtering of the matrix was observed on CFCs which included the matrix of 40 ˜ 60 w%. The energy dependence of the sputtering yields was weak. The sputtering yields of CFCs normally irradiated with deuterium beam were from 0.073 to 0.095, and were around three times larger than those with hydrogen beam.

Sputtering yields of carbon based materials under high particle flux with low energy

International Nuclear Information System (INIS)

Nakamura, K.; Nagase, A.; Dairaku, M.; Akiba, M.; Araki, M.; Okumura, Y.

1995-01-01

A new ion source which can produce high particle flux beams at low energies has been developed. This paper presents preliminary results on the sputtering yield of the carbon fiber reinforced composites (CFCs) measured with the new ion source. The sputtering yields of 1D and 2D CFCs, which are candidate materials for the divertor armour tiles, have been measured by the weight loss method under the hydrogen and deuterium particle fluxes of 2 similar 7x10 20 /m 2 s at 50 similar 150 eV. Preferential sputtering of the matrix was observed on CFCs which included the matrix of 40 similar 60 w%. The energy dependence of the sputtering yields was weak. The sputtering yields of CFCs normally irradiated with deuterium beam were from 0.073 to 0.095, and were around three times larger than those with hydrogen beam. ((orig.))

High-yield production of a stable Vero cell-based vaccine candidate against the highly pathogenic avian influenza virus H5N1

International Nuclear Information System (INIS)

Zhou, Fangye; Zhou, Jian; Ma, Lei; Song, Shaohui; Zhang, Xinwen; Li, Weidong; Jiang, Shude; Wang, Yue; Liao, Guoyang

2012-01-01

Highlights: ► Vero cell-based HPAI H5N1 vaccine with stable high yield. ► Stable high yield derived from the YNVa H3N2 backbone. ► H5N1/YNVa has a similar safety and immunogenicity to H5N1delta. -- Abstract: Highly pathogenic avian influenza (HPAI) viruses pose a global pandemic threat, for which rapid large-scale vaccine production technology is critical for prevention and control. Because chickens are highly susceptible to HPAI viruses, the supply of chicken embryos for vaccine production might be depleted during a virus outbreak. Therefore, developing HPAI virus vaccines using other technologies is critical. Meeting vaccine demand using the Vero cell-based fermentation process has been hindered by low stability and yield. In this study, a Vero cell-based HPAI H5N1 vaccine candidate (H5N1/YNVa) with stable high yield was achieved by reassortment of the Vero-adapted (Va) high growth A/Yunnan/1/2005(H3N2) (YNVa) virus with the A/Anhui/1/2005(H5N1) attenuated influenza vaccine strain (H5N1delta) using the 6/2 method. The reassorted H5N1/YNVa vaccine maintained a high hemagglutination (HA) titer of 1024. Furthermore, H5N1/YNVa displayed low pathogenicity and uniform immunogenicity compared to that of the parent virus.

The effects of pre-mix on burn in ICF capsules

International Nuclear Information System (INIS)

Wilson, D C; Kyrala, G A; Jr, J F Benage; Wysocki, F J; Gunderson, M A; Herrman, H W; Cooley, J H; Welser-Sherrill, L; Garbett, W J; Horsfield, C J; Glebov, V Y; Yaakobi, B; Roberts, S A; Frenje, J

2008-01-01

Directly driven implosions at the Omega laser have tested the effects of pre-mix of Ar, Kr, and Xe in D 2 + 3 He filled glass micro-balloons. Diagnostics included: D+D and D+T neutron yields, D+ 3 He proton yields and spectra, Doppler broadened ion temperatures, time dependent neutron and proton burn rates, and time gated, high energy filtered, X-ray images. Yields are better calculated by XSN LTE than by non-LTE. Yields with a small amount of pre-mix, atom fractions of ∼5e-3 for Ar, 2e-3 Kr, and Xe for 5e-4, are more degraded than calculated, while the measured ion temperatures are the same as without pre-mix. There is also a decrease in fuel ρr. The neutron burn histories suggest that the early yield coming before the reflected shock strikes the incoming shell is un-degraded, with yield degradation occurring afterwards. Adding 20 atm % 3 He to pure D fuel seems to produce a similar degradation. Calculated gated X-ray images agree with observed when the reflected shock strikes the incoming shell, but are smaller than observed afterward. This partially explains yield degradation and both the low fuel and whole capsule ρr's observed in secondary T+D neutrons and slowing of the D+ 3 He protons. Neither LTE on non-LTE captures the degradation by 3 He or at low pre-mix levels, nor matches the large shell radii after impact of the reflected shock

HIGH YIELD GENETICALLY MODIFIED WHEAT IN GERMANY: SOCIO ECONOMIC ASSESSMENT OF ITS POTENTIAL

OpenAIRE

Wree, Philipp; Sauer, Johannes

2015-01-01

High Yield Genetically Modified Wheat (HOSUT) HOSUT lines are an innovation in wheat breeding based on biotechnology with an incremental yield potential of ca. 28% compared to conventional wheat varieties. We apply the real option concept of Maximum Incremental Social Tolerable Irreversible Costs (MISTICs) to do an ex-ante assessment of the socioeconomic potential of HOSUT lines for Germany. We analyze the cost and benefits to farmer and society within two scenarios. Our results of our scenar...

Effects of electron-ion temperature equilibration on inertial confinement fusion implosions.

Science.gov (United States)

Xu, Barry; Hu, S X

2011-07-01

The electron-ion temperature relaxation essentially affects both the laser absorption in coronal plasmas and the hot-spot formation in inertial confinement fusion (ICF). It has recently been reexamined for plasma conditions closely relevant to ICF implosions using either classical molecular-dynamics simulations or analytical methods. To explore the electron-ion temperature equilibration effects on ICF implosion performance, we have examined two Coulomb logarithm models by implementing them into our hydrocodes, and we have carried out hydrosimulations for ICF implosions. Compared to the Lee-More model that is currently used in our standard hydrocodes, the two models predict substantial differences in laser absorption, coronal temperatures, and neutron yields for ICF implosions at the OMEGA Laser Facility [Boehly et al. Opt. Commun. 133, 495 (1997)]. Such effects on the triple-picket direct-drive design at the National Ignition Facility (NIF) have also been explored. Based on the validity of the two models, we have proposed a combined model of the electron-ion temperature-relaxation rate for the overall ICF plasma conditions. The hydrosimulations using the combined model for OMEGA implosions have shown ∼6% more laser absorption, ∼6%-15% higher coronal temperatures, and ∼10% more neutron yield, when compared to the Lee-More model prediction. It is also noticed that the gain for the NIF direct-drive design can be varied by ∼10% among the different electron-ion temperature-relaxation models.

Environmental needs in childhood disability analysed by the WHO ICF, Child and Youth Version

DEFF Research Database (Denmark)

Illum, Niels Ove; Bonderup, Mette; Gradel, Kim Oren

2016-01-01

influences through interviews in their own homes. RESULTS: Of the 367 invited parents, 332 (90.5%) participated, providing data on children with spina bifida, spinal muscular atrophy, muscular disorders, cerebral palsy, visual impairments, hearing impairments, mental disability and disabilities following......INTRODUCTION: The WHO has launched a common classification for disabilities in children, the International Classification of Functioning, Disability and Health, Child and Youth Version (ICF-CY). We wanted to determine whether cat-egories of the environmental (e) and the body functions (b......) components of the classification could address environmental needs in children with different disorders and various disability severities. METHODS: A set of 16 e categories and 47 b categories were selected and worded to best enable parents to describe children's everyday support needs and environmental...

Determinants of school activity performance in children with cerebral palsy: a multidimensional approach using the ICF-CY as a framework.

Science.gov (United States)

Huang, Chien-Yu; Tseng, Mei-Hui; Chen, Kuan-Lin; Shieh, Jeng-Yi; Lu, Lu

2013-11-01

This study aimed to identify the determinants of activity performance in children with cerebral palsy (CP) in school by considering factors from the entire scope of the International Classification of Functioning, Disability, and Health for Child and Youth (ICF-CY). A sample of 167 school-aged children with CP and their caregivers were recruited in the study. Activity performance in school settings was assessed with part 3 of the School Functional Assessment - Chinese version, which divides activity performance into performance of physical activities and cognitive/behavioral activities. Possible determinants were collected according to all dimensions of the ICF-CY. Multiple regression analyses showed that the determinants of performance of physical activities were receiving speech therapy in school, diplegia, having a domestic helper, and severity of gross and fine motor impairments, explaining 83% of the total variance; the determinants of performance of cognitive/behavioral activities were intellectual impairment, prosocial behavior, having an assistant in school, educational placement, severity of fine motor impairment, accounting for 73% of the total variance. Results of the study provide clinicians a holistic understanding of factors influencing school activity performance, and enable clinicians to make appropriate evaluations and interventions targeted at the determinants to enhance children's activity performance in school. Copyright © 2013 Elsevier Ltd. All rights reserved.

High-energy krypton fluoride lasers for inertial fusion.

Science.gov (United States)

Obenschain, Stephen; Lehmberg, Robert; Kehne, David; Hegeler, Frank; Wolford, Matthew; Sethian, John; Weaver, James; Karasik, Max

2015-11-01

Laser fusion researchers have realized since the 1970s that the deep UV light from excimer lasers would be an advantage as a driver for robust high-performance capsule implosions for inertial confinement fusion (ICF). Most of this research has centered on the krypton-fluoride (KrF) laser. In this article we review the advantages of the KrF laser for direct-drive ICF, the history of high-energy KrF laser development, and the present state of the art and describe a development path to the performance needed for laser fusion and its energy application. We include descriptions of the architecture and performance of the multi-kilojoule Nike KrF laser-target facility and the 700 J Electra high-repetition-rate KrF laser that were developed at the U.S. Naval Research Laboratory. Nike and Electra are the most advanced KrF lasers for inertial fusion research and energy applications.

Microbial Electrolysis Cells for High Yield Hydrogen Gas Production from Organic Matter

KAUST Repository

Logan, Bruce E.

2008-12-01

The use of electrochemically active bacteria to break down organic matter, combined with the addition of a small voltage (>0.2 V in practice) in specially designed microbial electrolysis cells (MECs), can result in a high yield of hydrogen gas. While microbial electrolysis was invented only a few years ago, rapid developments have led to hydrogen yields approaching 100%, energy yields based on electrical energy input many times greater than that possible by water electrolysis, and increased gas production rates. MECs used to make hydrogen gas are similar in design to microbial fuel cells (MFCs) that produce electricity, but there are important differences in architecture and analytical methods used to evaluate performance. We review here the materials, architectures, performance, and energy efficiencies of these MEC systems that show promise as a method for renewable and sustainable energy production, and wastewater treatment. © 2008 American Chemical Society.

Response of high yielding rice varieties to NaCl salinity in ...

African Journals Online (AJOL)

In order to find resistant varieties and study the reaction of some newly released high yielding varieties to different levels of salinity of irrigation water an experiment was conducted at the Rice Research Institute of Iran-Amol station in a greenhouse. Eight varieties, cultivated in pots, were tested with three levels of salinity (2, ...

Inertial fusion energy power plant design using the Compact Torus Accelerator: HYLIFE-CT

International Nuclear Information System (INIS)

Moir, R.W.; Hammer, J.H.; Hartman, C.W.; Leber, R.L.; Logan, B.G.; Petzoldt, R.W.; Tabak, M.; Tobin, M.T.; Bieri, R.L.; Hoffman, M.A.

1992-01-01

The Compact Torus Accelerator (CTA), under development at Lawrence Livermore National Laboratory, offers the promise of a low-cost, high-efficiency, high energy, high-power-density driver for ICF and MICF (Magnetically Insulated ICF) type fusion systems. A CTA with 100 MJ driver capacitor bank energy is predicted to deliver ∼30 MJ CT kinetic energy to a 1 cm 2 target in several nanoseconds for a power density of ∼10 16 watts/cm 2 . The estimated cost of delivered energy is ∼3$/Joule, or $100M for 30 MJ. This driver appears to be cost-effective and, in this regard, is virtually alone among IFE drivers. We discuss indirect-drive ICF with a DT fusion energy gain Q = 70 for a total yield of 2 GJ. The CT can be guided to the target inside a several-meter-long disposable cone made of frozen Li 2 BeF 4 , the same material as the coolant. We have designed a power plant including CT injection, target emplacement, containment, energy recovery, and tritium breeding. The cost of electricity is predicted to be 4.8 cents/kWh, which is competitive with future coal and nuclear costs

Improved Yield, Performance and Reliability of High-Actuator-Count Deformable Mirrors, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The project team will conduct processing and design research aimed at improving yield, performance, and reliability of high-actuator-count micro-electro-mechanical...

Supportability of a High-Yield-Stress Slurry in a New Stereolithography-Based Ceramic Fabrication Process

Science.gov (United States)

He, Li; Song, Xuan

2018-03-01

In recent years, ceramic fabrication using stereolithography (SLA) has gained in popularity because of its high accuracy and density that can be achieved in the final part of production. One of the key challenges in ceramic SLA is that support structures are required for building overhanging features, whereas removing these support structures without damaging the components is difficult. In this research, a suspension-enclosing projection-stereolithography process is developed to overcome this challenge. This process uses a high-yield-stress ceramic slurry as the feedstock material and exploits the elastic force of the material to support overhanging features without the need for building additional support structures. Ceramic slurries with different solid loadings are studied to identify the rheological properties most suitable for supporting overhanging features. An analytical model of a double doctor-blade module is established to obtain uniform and thin recoating layers from a high-yield-stress slurry. Several test cases highlight the feasibility of using a high-yield-stress slurry to support overhanging features in SLA.

Crop Yield Predictions - High Resolution Statistical Model for Intra-season Forecasts Applied to Corn in the US

Science.gov (United States)

Cai, Y.

2017-12-01

Accurately forecasting crop yields has broad implications for economic trading, food production monitoring, and global food security. However, the variation of environmental variables presents challenges to model yields accurately, especially when the lack of highly accurate measurements creates difficulties in creating models that can succeed across space and time. In 2016, we developed a sequence of machine-learning based models forecasting end-of-season corn yields for the US at both the county and national levels. We combined machine learning algorithms in a hierarchical way, and used an understanding of physiological processes in temporal feature selection, to achieve high precision in our intra-season forecasts, including in very anomalous seasons. During the live run, we predicted the national corn yield within 1.40% of the final USDA number as early as August. In the backtesting of the 2000-2015 period, our model predicts national yield within 2.69% of the actual yield on average already by mid-August. At the county level, our model predicts 77% of the variation in final yield using data through the beginning of August and improves to 80% by the beginning of October, with the percentage of counties predicted within 10% of the average yield increasing from 68% to 73%. Further, the lowest errors are in the most significant producing regions, resulting in very high precision national-level forecasts. In addition, we identify the changes of important variables throughout the season, specifically early-season land surface temperature, and mid-season land surface temperature and vegetation index. For the 2017 season, we feed 2016 data to the training set, together with additional geospatial data sources, aiming to make the current model even more precise. We will show how our 2017 US corn yield forecasts converges in time, which factors affect the yield the most, as well as present our plans for 2018 model adjustments.

High-yield production of a stable Vero cell-based vaccine candidate against the highly pathogenic avian influenza virus H5N1

Energy Technology Data Exchange (ETDEWEB)

Zhou, Fangye; Zhou, Jian; Ma, Lei; Song, Shaohui; Zhang, Xinwen; Li, Weidong; Jiang, Shude [No. 5, Department of Bioproducts, Institute of Medical Biology, Chinese Academy of Medical Science and Pecking Union Medical College, Jiaoling Avenue 935, Kunming, Yunnan Province 650102, People' s Republic of China (China); Wang, Yue [National Institute for Viral Disease Control and Prevention, China Center for Disease Control and Prevention, Yingxin Lane 100, Xicheng District, Beijing 100052, People' s Republic of China (China); Liao, Guoyang [No. 5, Department of Bioproducts, Institute of Medical Biology, Chinese Academy of Medical Science and Pecking Union Medical College, Jiaoling Avenue 935, Kunming, Yunnan Province 650102, People' s Republic of China (China)

2012-05-18

Highlights: Black-Right-Pointing-Pointer Vero cell-based HPAI H5N1 vaccine with stable high yield. Black-Right-Pointing-Pointer Stable high yield derived from the YNVa H3N2 backbone. Black-Right-Pointing-Pointer H5N1/YNVa has a similar safety and immunogenicity to H5N1delta. -- Abstract: Highly pathogenic avian influenza (HPAI) viruses pose a global pandemic threat, for which rapid large-scale vaccine production technology is critical for prevention and control. Because chickens are highly susceptible to HPAI viruses, the supply of chicken embryos for vaccine production might be depleted during a virus outbreak. Therefore, developing HPAI virus vaccines using other technologies is critical. Meeting vaccine demand using the Vero cell-based fermentation process has been hindered by low stability and yield. In this study, a Vero cell-based HPAI H5N1 vaccine candidate (H5N1/YNVa) with stable high yield was achieved by reassortment of the Vero-adapted (Va) high growth A/Yunnan/1/2005(H3N2) (YNVa) virus with the A/Anhui/1/2005(H5N1) attenuated influenza vaccine strain (H5N1delta) using the 6/2 method. The reassorted H5N1/YNVa vaccine maintained a high hemagglutination (HA) titer of 1024. Furthermore, H5N1/YNVa displayed low pathogenicity and uniform immunogenicity compared to that of the parent virus.

Isolation of hardy and high-yielding mutants in citronella (Cymbopogon winterianus)

International Nuclear Information System (INIS)

Kole, C.R.

1990-01-01

Full text: Citronella bears an essential oil of medicinal and aromatic importance. But little has been done for its genetic improvement. It is a clonally propagated crop and the genetic variability is too low for effective selection. Besides, various reproductive anomalies limit the scope for cross-breeding. With this in view, a mutation induction experiment was conducted. This crop is mostly grown in marginal lands and hardy genotypes are required. Exposure of vegetative slips of an improved strain (KS-CW-S-I) to x-rays at 3,6 and 9kR paved the way for selection of 53 elite M 1 V 2 clumps on the basis of the yield component characters. Mass screening under minimal cultural practices in a drought-prone zone in Western Orissa (India) led to identification of 16 potentially hardy clones (OJC-12 from 3kR, OJC-1, 3, 11, 18 and 20 from 6kR and OJC-4, 5, 6, 15, 21, 22, 24, 26, 30 and 31 from 9kR). The clones were planted with 3 replications in mid-monsoon, established during the remaining months of monsoon and grown thereafter under minimal cultural practices, i.e. no manure, fertiliser, irrigation, weeding or plant protection. Data on yield of fresh leaf and oil extracted from fresh leaves were recorded at harvest 6 months after planting at 5 to 6 leaf stage. The results revealed a highly significant variation with regard to yield of both leaf and oil. Six clones out-yielded the mother line for leaf as well as oil, and two clones surpassed the mother line in leaf yield only. The performance of clone OJC-3 was particularly encouraging. With 1.25 kg/plant leaf, 9.63cc/plant oil it superseded the yield of the mother line and other cultivars of this species (all around 0.6 kg/plant leaf, 5cc/plant oil) even when grown with irrigation. (author)

Temporal behaviour of self generated magnetic field and its influence on inhibition of thermal flux in ICF plasma

International Nuclear Information System (INIS)

Jha, L.N.

1989-06-01

The self generated magnetic field of megagauss order is reported to play a crucial role in ICF target designs because of its strong influence on the transport of energy from the critical density region to the ablation layer. The inhibition of the thermal flux due to such a field, thus, affects the whole of the other phenomenon of ICF. The knowledge of the proper variation of the magnetic field may help in assigning the existing controversial value of flux limit, f. Many papers dealing with the spatial variation of such a field exist and are well documented but the study on the variation of self generated field with time is rare. Here, the spatial variation of the megagauss field generated in the corona of a wire target irradiated by a laser as well as a model to study the temporal nature of the B-field at the peak have been obtained by solving the self inhibited diffusion which is regarded as the most dominant mechanism by which the thermal transport is influenced. The field exists for about ten nanoseconds even after the laser is switched off. The ratio of the two components of the thermal conductivity is also plotted against time and shows the inhibition. So, a track on the B-field variation both in space and time is necessary to keep for at least a few nanoseconds for computation of f. (author). 19 refs, 4 figs

Cascade: a high-efficiency ICF power reactor

International Nuclear Information System (INIS)

Pitts, J.H.

1985-01-01

Cascade attains a net power-plant efficiency of 49% and its cost is competitive with high-temperature gas-cooled reactor, pressurized-water reactor, and coal-fired power plants. The Cascade reactor and blanket are made of ceramic materials and activation is 6 times less than that of the MARS Tandem Mirror Reactor operating at comparable power. Hands-on maintenance of the heat exchangers is possible one day after shutdown. Essentially all tritium is recovered in the vacuum system, with the remainder recovered from the helium power conversion loop. Tritium leakage external to the vacuum system and power conversion loop is only 0.03 Ci/d

The studies on radiation mutation breeding of Bacillus subtilis with high-yield of amylase

International Nuclear Information System (INIS)

Chen Xiaoming; Zhang Liang; Zhang Jianguo; Zhou Liwei

2008-01-01

The mutagenesis effects on the yield of amylase have been investigated with Bacillus subtilis irradiated by γ-rays and fast neutrons in once or twice irradiation at various dose rates and total irradiation doses. Several parameters such as flat transparent circle, colony diameter, transparent circle diameter and the ratio of flat transparent circle to colony diameter (HC) are used to estimate the radiation mutation of Bacillus subtilis. A series of results has been obtained as (1) Irradiation both with neutrons and γ-rays could make Bacillus subtilis mutationed to produce high-yield amylase effectively. (2) The average colony diameter of Bacillus subtilis irradiated by γ-rays or fast neutrons is smaller than that of control group at various total doses and dose rates. And their colony diameter becomes smaller slightly with the increment of γ-rays irradiation dose. (3) After the second neutrons irradiation, the values of average colony diameter, the biggest colony diameter, average transparent circle diameter and the biggest transparent circle diameter of all mutationed Bacillus subtilis exceed that of original strains greatly. (4) Three kinds of mutationed Bacillus subtilis strains with high-yield amylase have been screened out, in which two strains can produce high-yield amylase steadily after 15 times breeding. Their biggest colony diameter, the biggest transparent circle diameter and the biggest HC value are up to 8.32 mm, 22.38 mm and 5.39 respectively. (authors)

Creating high yield water soluble luminescent graphene quantum dots via exfoliating and disintegrating carbon nanotubes and graphite flakes.

Science.gov (United States)

Lin, Liangxu; Zhang, Shaowei

2012-10-21

We have developed an effective method to exfoliate and disintegrate multi-walled carbon nanotubes and graphite flakes. With this technique, high yield production of luminescent graphene quantum dots with high quantum yield and low oxidization can be achieved.

Two-dimensional nucleonics calculations for a ''FIRST STEP'' conceptual ICF reactor

International Nuclear Information System (INIS)

Davidson, J.W.; Battat, M.E.; Saylor, W.W.; Pendergrass, J.H.; Dudziak, D.J.

1985-01-01

A detailed two-dimensional nucleonic analysis has been performed for the FIRST STEP conceptual ICF reactor blanket design. The reactor concept incorporated in this design is a modified wetted-wall cavity with target illumination geometry left as a design variable. The 2-m radius spherical cavity is surrounded by a blanket containing lithium and 238 U as fertile species and also as energy multipliers. The blanket is configured as 0.6-m-thick cylindrical annuli containing modified LMFBR-type fuel elements with 0.5-m-thick fuel-bearing axial end plugs. Liquid lithium surrounds the inner blanket regions and serves as the coolant for both the blanket and the first wall. The two-dimensional analysis of the blanket performance was made using the 2-D discrete-ordinates code TRISM, and benchmarked with the 3-D Monte Carlo code MCNP. Integral responses including the tritium breeding ratio (TBR), plutonium breeding ratio (PUBR), and blanket energy multiplication were calculated for axial and radial blanket regions. Spatial distributions were calculated for steady-state rates of fission, neutron heating, prompt gamma-ray heating, and fuel breeding

Photo-oxidation of histidine peptides yields high concentrations of unstable peroxides

International Nuclear Information System (INIS)

Policarpio, V.V.; Hawkins, C.L.; Davies, M.J.

2003-01-01

Oxidation of proteins by UV, and visible light in the presence of sensitizers, results in side chain modification as well as aggregation and fragmentation. In particular, singlet oxygen has been reported to oxidize Met, Trp, Tyr, Cys and His side chains in a selective manner. In this study the oxidation of histidine and its derivatives, and His-containing peptides is examined using a range of sensitizers, to determine whether peroxides are major intermediates, and the mechanism of formation of these species. Visible light-sensitised oxidation of Gly-His-Gly in the presence of oxygen and rose bengal gives unstable substrate-derived peroxides with the peroxide yield increasing with increasing photolysis time. Similar behaviour was detected with other photosensitizers, though the peroxide yields varied with the sensitizer at identical concentrations with rose bengal > aluminium phthalocyanine > hematoporphyrin IX > zinc phthalocyanine > tetrakisporphine. The peroxide yield was decreased in the presence of azide and enhanced when deuterium oxide was employed as the solvent, consistent with peroxide formation being singlet oxygen mediated. Experiments using anoxic conditions gave low yields of peroxides confirming the oxygen-dependence of these reactions. HPLC analysis showed rapid loss of the parent peptide, with subsequent formation of both stable and unstable products; these are currently being characterized by MS and NMR. Similar behavior has been observed with other His derivatives. The yield of singlet oxygen formed in these reactions has been estimated using a bleaching assay (N, N-dimethyl-4-nitrosoaniline). Quantification of singlet oxygen formation and Gly-His-Gly derived peroxide during rose bengal-mediated photooxidation indicated a conversion efficiency of the initial singlet oxygen into substrate-derived peroxides of ca. 75% indicating that peroxide formation is a highly efficient and major reaction pathway

High-yield synthesis and optical response of gold nanostars

Energy Technology Data Exchange (ETDEWEB)

Kumar, Pandian Senthil [Departamento de Quimica Fisica and Unidad Asociada CSIC-Universidade de Vigo, 36310 Vigo (Spain); Pastoriza-Santos, Isabel [Departamento de Quimica Fisica and Unidad Asociada CSIC-Universidade de Vigo, 36310 Vigo (Spain); RodrIguez-Gonzalez, Benito [Departamento de Quimica Fisica and Unidad Asociada CSIC-Universidade de Vigo, 36310 Vigo (Spain); Abajo, F Javier GarcIa de [Instituto de Optica-CSIC, Serrano 121, 28006 Madrid (Spain); Liz-Marzan, Luis M [Departamento de Quimica Fisica and Unidad Asociada CSIC-Universidade de Vigo, 36310 Vigo (Spain)

2008-01-09

Multipod Au nanoparticles (nanostars) with single crystalline tips were synthesized in extremely high yield through the reduction of HAuCl{sub 4} in a concentrated solution of poly(vinylpyrrolidone) (PVP) in N,N-dimethylformamide (DMF), in the presence of preformed Au nanoparticle seeds, but with no need for external energy sources. Nanostar dispersions display a well-defined optical response, which was found (through theoretical modeling) to comprise a main mode confined within the tips and a secondary mode confined in the central body. Calculations of the surface enhanced Raman scattering (SERS) response additionally show that this morphology will be relevant for sensing applications.

High-yield synthesis and optical response of gold nanostars

Science.gov (United States)

Senthil Kumar, Pandian; Pastoriza-Santos, Isabel; Rodríguez-González, Benito; García de Abajo, F. Javier; Liz-Marzán, Luis M.

2008-01-01

Multipod Au nanoparticles (nanostars) with single crystalline tips were synthesized in extremely high yield through the reduction of HAuCl4 in a concentrated solution of poly(vinylpyrrolidone) (PVP) in N,N-dimethylformamide (DMF), in the presence of preformed Au nanoparticle seeds, but with no need for external energy sources. Nanostar dispersions display a well-defined optical response, which was found (through theoretical modeling) to comprise a main mode confined within the tips and a secondary mode confined in the central body. Calculations of the surface enhanced Raman scattering (SERS) response additionally show that this morphology will be relevant for sensing applications.

High-yield synthesis and optical response of gold nanostars

International Nuclear Information System (INIS)

Kumar, Pandian Senthil; Pastoriza-Santos, Isabel; RodrIguez-Gonzalez, Benito; Abajo, F Javier GarcIa de; Liz-Marzan, Luis M

2008-01-01

Multipod Au nanoparticles (nanostars) with single crystalline tips were synthesized in extremely high yield through the reduction of HAuCl 4 in a concentrated solution of poly(vinylpyrrolidone) (PVP) in N,N-dimethylformamide (DMF), in the presence of preformed Au nanoparticle seeds, but with no need for external energy sources. Nanostar dispersions display a well-defined optical response, which was found (through theoretical modeling) to comprise a main mode confined within the tips and a secondary mode confined in the central body. Calculations of the surface enhanced Raman scattering (SERS) response additionally show that this morphology will be relevant for sensing applications

Use of 15N dilution method for screening soybean lines with high yield and high nitrogen fixation ability