Item Analysis in Introductory Economics Testing.

Science.gov (United States)

Tinari, Frank D.

1979-01-01

Computerized analysis of multiple choice test items is explained. Examples of item analysis applications in the introductory economics course are discussed with respect to three objectives: to evaluate learning; to improve test items; and to help improve classroom instruction. Problems, costs and benefits of the procedures are identified. (JMD)

Cost Analysis for a Supplier in an Inflationary Environment with Stock Dependent Demand Rate for Perishable Items

Directory of Open Access Journals (Sweden)

Madhu Jain

2014-01-01

Full Text Available The present study is concerned with the cost modeling of an inventory system with perishable multi-items having stock dependent demand rates under an inflationary environment of the market. The concept of permissible delay is taken into account. The study provides the cost analysis of inventory system under the decision criteria of time value of money, inflation, deterioration, and stock dependent demand. Numerical illustrations are derived from the quantitative model to validate the results. The cost of inventory and optimal time are also computed by varying different system parameters. The comparison of these results is facilitated by computing the results with neurofuzzy results.

Innovative High-Performance Deposition Technology for Low-Cost Manufacturing of OLED Lighting

Energy Technology Data Exchange (ETDEWEB)

Scott, David; Hamer, John

2017-06-30

In this project, OLEDWorks developed and demonstrated the innovative high-performance deposition technology required to deliver dramatic reductions in the cost of manufacturing OLED lighting in production equipment. The current high manufacturing cost of OLED lighting is the most urgent barrier to its market acceptance. The new deposition technology delivers solutions to the two largest parts of the manufacturing cost problem – the expense per area of good product for organic materials and for the capital cost and depreciation of the equipment. Organic materials cost is the largest expense item in the bill of materials and is predicted to remain so through 2020. The high-performance deposition technology developed in this project, also known as the next generation source (NGS), increases material usage efficiency from 25% found in current Gen2 deposition technology to 60%. This improvement alone results in a reduction of approximately $25/m2 of good product in organic materials costs, independent of production volumes. Additionally, this innovative deposition technology reduces the total depreciation cost from the estimated value of approximately $780/m2 of good product for state-of-the-art G2 lines (at capacity, 5-year straight line depreciation) to $170/m2 of good product from the OLEDWorks production line.

Spare Items validation

International Nuclear Information System (INIS)

Fernandez Carratala, L.

1998-01-01

There is an increasing difficulty for purchasing safety related spare items, with certifications by manufacturers for maintaining the original qualifications of the equipment of destination. The main reasons are, on the top of the logical evolution of technology, applied to the new manufactured components, the quitting of nuclear specific production lines and the evolution of manufacturers quality systems, originally based on nuclear codes and standards, to conventional industry standards. To face this problem, for many years different Dedication processes have been implemented to verify whether a commercial grade element is acceptable to be used in safety related applications. In the same way, due to our particular position regarding the spare part supplies, mainly from markets others than the american, C.N. Trillo has developed a methodology called Spare Items Validation. This methodology, which is originally based on dedication processes, is not a single process but a group of coordinated processes involving engineering, quality and management activities. These are to be performed on the spare item itself, its design control, its fabrication and its supply for allowing its use in destinations with specific requirements. The scope of application is not only focussed on safety related items, but also to complex design, high cost or plant reliability related components. The implementation in C.N. Trillo has been mainly curried out by merging, modifying and making the most of processes and activities which were already being performed in the company. (Author)

DRD4 long allele carriers show heightened attention to high-priority items relative to low-priority items.

Science.gov (United States)

Gorlick, Marissa A; Worthy, Darrell A; Knopik, Valerie S; McGeary, John E; Beevers, Christopher G; Maddox, W Todd

2015-03-01

Humans with seven or more repeats in exon III of the DRD4 gene (long DRD4 carriers) sometimes demonstrate impaired attention, as seen in attention-deficit hyperactivity disorder, and at other times demonstrate heightened attention, as seen in addictive behavior. Although the clinical effects of DRD4 are the focus of much work, this gene may not necessarily serve as a "risk" gene for attentional deficits, but as a plasticity gene where attention is heightened for priority items in the environment and impaired for minor items. Here we examine the role of DRD4 in two tasks that benefit from selective attention to high-priority information. We examine a category learning task where performance is supported by focusing on features and updating verbal rules. Here, selective attention to the most salient features is associated with good performance. In addition, we examine the Operation Span (OSPAN) task, a working memory capacity task that relies on selective attention to update and maintain items in memory while also performing a secondary task. Long DRD4 carriers show superior performance relative to short DRD4 homozygotes (six or less tandem repeats) in both the category learning and OSPAN tasks. These results suggest that DRD4 may serve as a "plasticity" gene where individuals with the long allele show heightened selective attention to high-priority items in the environment, which can be beneficial in the appropriate context.

Approximation Preserving Reductions among Item Pricing Problems

Science.gov (United States)

Hamane, Ryoso; Itoh, Toshiya; Tomita, Kouhei

When a store sells items to customers, the store wishes to determine the prices of the items to maximize its profit. Intuitively, if the store sells the items with low (resp. high) prices, the customers buy more (resp. less) items, which provides less profit to the store. So it would be hard for the store to decide the prices of items. Assume that the store has a set V of n items and there is a set E of m customers who wish to buy those items, and also assume that each item i ∈ V has the production cost di and each customer ej ∈ E has the valuation vj on the bundle ej ⊆ V of items. When the store sells an item i ∈ V at the price ri, the profit for the item i is pi = ri - di. The goal of the store is to decide the price of each item to maximize its total profit. We refer to this maximization problem as the item pricing problem. In most of the previous works, the item pricing problem was considered under the assumption that pi ≥ 0 for each i ∈ V, however, Balcan, et al. [In Proc. of WINE, LNCS 4858, 2007] introduced the notion of “loss-leader, ” and showed that the seller can get more total profit in the case that pi < 0 is allowed than in the case that pi < 0 is not allowed. In this paper, we derive approximation preserving reductions among several item pricing problems and show that all of them have algorithms with good approximation ratio.

The costs and calorie content of à la carte food items purchased by students during school lunch

Directory of Open Access Journals (Sweden)

Betsey Ramirez

2018-06-01

Full Text Available School environments influence student food choices. À la carte foods and beverages are often low nutrient and energy dense. This study assessed how much money students spent for these foods, and the total kilocalories purchased per student during the 2012–2013 school year. Six elementary and four intermediate schools in the Houston area provided daily food purchase transaction data, and the cost and the calories for each item. Chi-square analysis assessed differences in the number of students purchasing à la carte items by grade level and school free/reduced-price meal (FRP eligibility. Analysis of covariance assessed grade level differences in cost and calories of weekly purchases, controlling for FRP eligibility. Intermediate grade students spent significantly more on à la carte food purchases and purchased more calories (both p < 0.001 than elementary school students. Lower socioeconomic status (SES elementary and intermediate school students purchased fewer à la carte foods compared to those in higher SES schools (p < 0.001. Intermediate school students purchased more à la carte foods and calories from à la carte foods than elementary students. Whether the new competitive food rules in schools improve student food selection and purchase, and dietary intake habits across all grade levels remains unknown. Keywords: National School Lunch Program, Elementary schools, Intermediate schools, À la carte foods, Competitive foods, Costs, Calories

The anticipated costs analysis and benefit items survey against performing the maintenance rule

International Nuclear Information System (INIS)

Hwang, M. J.; Kim, K. Y.; Yang, Z. A.

2002-01-01

In this paper, we surveyed the cost and benefit items and evaluated the costs against performing the Maintenance Rule. In the past, only one electric power company had provided the electricity without free competition in Korea. In these days, however, the electric power company was divided into two parts by the sources: atomic and hydraulic generation and thermal-power generation. Therefore, the generation sources that done have competitiveness at the price will be weeded out in the electric power market. Although the preferential goal is on the safe operation at the Nuclear power Plants (NPPs), if too much money is required to maintain or improve the safety of the NPP, the licensee could hesitate to adopt the program related to the safety even though it is a good one. Since the Risk-Informed Applications (RIA) have been using for a plant operation in recent, the condition of a plant might be changed. Therefore, considering the affects of the RIA, a method to keep the capability through the monitoring the maintenance effectiveness has been proposed. However, to perform this, a number of works, continuous collecting data and monitoring the maintenance effectiveness and understanding the reason of degrading capability, should be preceded. Therefore, a lot of man-hour is needed to develop and to manage the application method, and the licensee should pay the costs. Therefore, in the domestic circumstance, it is necessary to evaluate the cost to monitor the maintenance effectiveness. Hence, we are going to examine the cost to perform the MR and its anticipated benefit lists

874 CONSTRUCTION COST MODELS FOR HIGHRISE OFFICE ...

African Journals Online (AJOL)

USER

2015-10-28

Oct 28, 2015 ... cost-significant items, 15 priced bills of quantities of high rise office building pro ects executed or awarded in Nigeria between 2002 and 2011 were analysed. The study found that11 (29. %) out of 3 bill items were cost-significant accounting for 2.2% of total value of the work. The implication of the finding is ...

Automated Item Generation with Recurrent Neural Networks.

Science.gov (United States)

von Davier, Matthias

2018-03-12

Utilizing technology for automated item generation is not a new idea. However, test items used in commercial testing programs or in research are still predominantly written by humans, in most cases by content experts or professional item writers. Human experts are a limited resource and testing agencies incur high costs in the process of continuous renewal of item banks to sustain testing programs. Using algorithms instead holds the promise of providing unlimited resources for this crucial part of assessment development. The approach presented here deviates in several ways from previous attempts to solve this problem. In the past, automatic item generation relied either on generating clones of narrowly defined item types such as those found in language free intelligence tests (e.g., Raven's progressive matrices) or on an extensive analysis of task components and derivation of schemata to produce items with pre-specified variability that are hoped to have predictable levels of difficulty. It is somewhat unlikely that researchers utilizing these previous approaches would look at the proposed approach with favor; however, recent applications of machine learning show success in solving tasks that seemed impossible for machines not too long ago. The proposed approach uses deep learning to implement probabilistic language models, not unlike what Google brain and Amazon Alexa use for language processing and generation.

Developing a Model for Optimizing Inventory of Repairable Items at Single Operating Base

OpenAIRE

Le, Tin

2016-01-01

The use of EOQ model in inventory management is popular. However, EOQ models has many disadvantages, especially, when the model is applied to manage repairable items. In order to deal with high-cost and repairable items, Craig C. Sherbrooke introduced a model in his book “Optimal Inventory Modeling of Systems: Multi-Echelon Techniques”. The research focus is to implement and develop a program to execute the single-site in-ventory model for repairable items. The model helps to significantl...

Gender-Based Differential Item Performance in Mathematics Achievement Items.

Science.gov (United States)

Doolittle, Allen E.; Cleary, T. Anne

1987-01-01

Eight randomly equivalent samples of high school seniors were each given a unique form of the ACT Assessment Mathematics Usage Test (ACTM). Signed measures of differential item performance (DIP) were obtained for each item in the eight ACTM forms. DIP estimates were analyzed and a significant item category effect was found. (Author/LMO)

Reducing Operating Room Costs Through Real-Time Cost Information Feedback: A Pilot Study.

Science.gov (United States)

Tabib, Christian H; Bahler, Clinton D; Hardacker, Thomas J; Ball, Kevin M; Sundaram, Chandru P

2015-08-01

To create a protocol for providing real-time operating room (OR) cost feedback to surgeons. We hypothesize that this protocol will reduce costs in a responsible way without sacrificing quality of care. All OR costs were obtained and recorded for robot-assisted partial nephrectomy and laparoscopic donor nephrectomy. Before the beginning of this project, costs pertaining to the 20 most recent cases were analyzed. Items were identified from previous cases as modifiable for replacement or omission. Timely feedback of total OR costs and cost of each item used was provided to the surgeon after each case, and costs were analyzed. A cost analysis of the robot-assisted partial nephrectomy before the washout period indicates expenditures of $5243.04 per case. Ten recommended modifiable items were found to have an average per case cost of $1229.33 representing 23.4% of the total cost. A postwashout period cost analysis found the total OR cost decreased by $899.67 (17.2%) because of changes directly related to the modifiable items. Therefore, 73.2% of the possible identified savings was realized. The same stepwise approach was applied to laparoscopic donor nephrectomies. The average total cost per case before the washout period was $3530.05 with $457.54 attributed to modifiable items. After the washout period, modifiable items costs were reduced by $289.73 (8.0%). No complications occurred in the donor nephrectomy cases while one postoperative complication occurred in the partial nephrectomy group. Providing surgeons with feedback related to OR costs may lead to a change in surgeon behavior and decreased overall costs. Further studies are needed to show equivalence in patient outcomes.

Procurement Engineering Process for Commercial Grade Item Dedication

International Nuclear Information System (INIS)

Park, Jong-Hyuck; Park, Jong-Eun; Kwak, Tack-Hun; Yoo, Keun-Bae; Lee, Sang-Guk; Hong, Sung-Yull

2006-01-01

Procurement Engineering Process for commercial grade item dedication plays an increasingly important role in operation management of Korea Nuclear Power Plants. The purpose of the Procurement Engineering Process is the provision and assurance of a high quality and quantity of spare, replacement, retrofit and new parts and equipment while maximizing plant availability, minimizing downtime due to parts unavailability and providing reasonable overall program and inventory cost. In this paper, we will review the overview requirements, responsibilities and the process for demonstrating with reasonable assurance that a procured item for potential nuclear safety related services or other essential plant service is adequate with reasonable assurance for its application. This paper does not cover the details of technical evaluation, selecting critical characteristics, selecting acceptance methods, performing failure modes and effects analysis, performing source surveillance, performing quality surveys, performing special tests and inspections, and the other aspects of effective Procurement Engineering and Commercial Grade Item Dedication. The main contribution of this paper is to provide the provision of an overview of Procurement Engineering Process for commercial grade item

Science Literacy: How do High School Students Solve PISA Test Items?

Science.gov (United States)

Wati, F.; Sinaga, P.; Priyandoko, D.

2017-09-01

The Programme for International Students Assessment (PISA) does assess students’ science literacy in a real-life contexts and wide variety of situation. Therefore, the results do not provide adequate information for the teacher to excavate students’ science literacy because the range of materials taught at schools depends on the curriculum used. This study aims to investigate the way how junior high school students in Indonesia solve PISA test items. Data was collected by using PISA test items in greenhouse unit employed to 36 students of 9th grade. Students’ answer was analyzed qualitatively for each item based on competence tested in the problem. The way how students answer the problem exhibits their ability in particular competence which is influenced by a number of factors. Those are students’ unfamiliarity with test construction, low performance on reading, low in connecting available information and question, and limitation on expressing their ideas effectively and easy-read. As the effort, selected PISA test items can be used in accordance teaching topic taught to familiarize students with science literacy.

Unit Price and Cost Estimation Equations through Items Percentage of Construction Works in a Desert Area

Directory of Open Access Journals (Sweden)

Kadhim Raheem

2015-02-01

Full Text Available This research will cover different aspects of estimating process of construction work in a desert area. The inherent difficulties which accompany the cost estimating of the construction works in desert environment in a developing country, will stem from the limited information available, resources scarcity, low level of skilled workers, the prevailing severe weather conditions and many others, which definitely don't provide a fair, reliable and accurate estimation. This study tries to present unit price to estimate the cost in preliminary phase of a project. Estimations are supported by developing mathematical equations based on the historical data of maintenance, new construction of managerial and school projects. Meanwhile, the research has determined the percentage of project items, in such a remote environment. Estimation equations suitable for remote areas have been formulated. Moreover, a procedure for unite price calculation is concluded.

Cost-identification analysis of total laryngectomy: an itemized approach to hospital costs.

Science.gov (United States)

Dedhia, Raj C; Smith, Kenneth J; Weissfeld, Joel L; Saul, Melissa I; Lee, Steve C; Myers, Eugene N; Johnson, Jonas T

2011-02-01

To understand the contribution of intraoperative and postoperative hospital costs to total hospital costs, examine the costs associated with specific hospital services in the postoperative period, and recognize the impact of patient factors on hospital costs. Case series with chart review. Large tertiary care teaching hospital system. Using the Pittsburgh Head and Neck Organ-Specific Database, 119 patients were identified as having total laryngectomy with bilateral selective neck dissection and primary closure from 1999 to 2009. Cost data were obtained for 112 patients. Costs include fixed and variable costs, adjusted to 2010 US dollars using the Consumer Price Index. Mean total hospital costs were $29,563 (range, $10,915 to $120,345). Operating room costs averaged 24% of total hospital costs, whereas room charges, respiratory therapy, laboratory, pharmacy, and radiology accounted for 38%, 14%, 8%, 7%, and 3%, respectively. Median length of stay was 9 days (range, 6-43), and median Charlson comorbidity index score was 8 (2-16). Patients with ≥1 day in the intensive care unit had significantly higher hospital costs ($46,831 vs $24,601, P cost differences with stratification based on previous radiation therapy ($27,598 vs $29,915 with no prior radiation, P = .62) or hospital readmission within 30 days ($29,483 vs $29,609 without readmission, P = .97). This is one of few studies in surgery and the first in otolaryngology to analyze hospital costs for a relatively standardized procedure. Further work will include cost analysis from multiple centers with investigation of global cost drivers.

Storage options for Long Length Contaminated Equipment (LLCE) items

International Nuclear Information System (INIS)

Hodgson, R.D.

1994-11-01

A review of the Washington state requirements for the storage of long equipment items removed from tanks indicate that if the contaminated materials on the long equipment items are analyzed and determined to be DW, and not EHW, the containers can be stored on an uncovered, RCRA approved, storage pad. Long equipment items contaminated with reportable levels of EHW, or suspected of being contaminated with EHW, must be protected from the elements by means of a building or other protective covering that otherwise allows adequate inspection of the containers. Storage of the long equipment item containers on an uncovered storage pad is recommended and will reduce construction costs for new storage by an estimated 60 percent when compared to construction costs for enclosed storage

Production of solidified high level wastes: a cost comparison of solidification processes

International Nuclear Information System (INIS)

1977-06-01

Differential cost estimates of the annual operating and maintenance costs and the capital costs for five HLW Waste Solidification Alternates were developed. The annual operating and maintenance cost estimates included the cost of labor, consumables, utilities, shipping casks, shipping and disposal at a federal repository. The capital cost included the cost of the component, installation and building. The differential cost estimates do not include equipment and facilities which are either shared with the reprocessing facility or are common between all of the alternates. Total annual cost differential between the five waste form alternates is summarized in tabular form. The Borosilicate Glass Alternate has the lowest total annual cost. The other alternates have higher costs which range from $6.6 M to $7.4 M per year higher than the Glass alternate with the Supercalcine being the highest cost at $7.4 M per year differential. The major items in the cost estimates are then disposal costs in the operating cost estimates and the HLW Storage Tanks in the capital cost estimates. The Supercalcine Multibarrier Alternate ships 180 canisters per year more than the other alternates and consequently has a significantly higher operating cost. However, off-setting this the Supercalcine Multibarrier Alternate does not require HLW Storage Tanks for decay because of the high heat conductivity of this product and correspondingly the capital cost for this alternate is significantly lower than the other alternates. The radiological risk values are correlated with the cost evaluation normalized to cost ($)/MWe-yr

Detection of abnormal item based on time intervals for recommender systems.

Science.gov (United States)

Gao, Min; Yuan, Quan; Ling, Bin; Xiong, Qingyu

2014-01-01

With the rapid development of e-business, personalized recommendation has become core competence for enterprises to gain profits and improve customer satisfaction. Although collaborative filtering is the most successful approach for building a recommender system, it suffers from "shilling" attacks. In recent years, the research on shilling attacks has been greatly improved. However, the approaches suffer from serious problem in attack model dependency and high computational cost. To solve the problem, an approach for the detection of abnormal item is proposed in this paper. In the paper, two common features of all attack models are analyzed at first. A revised bottom-up discretized approach is then proposed based on time intervals and the features for the detection. The distributions of ratings in different time intervals are compared to detect anomaly based on the calculation of chi square distribution (χ(2)). We evaluated our approach on four types of items which are defined according to the life cycles of these items. The experimental results show that the proposed approach achieves a high detection rate with low computational cost when the number of attack profiles is more than 15. It improves the efficiency in shilling attacks detection by narrowing down the suspicious users.

Detection of Abnormal Item Based on Time Intervals for Recommender Systems

Directory of Open Access Journals (Sweden)

Min Gao

2014-01-01

Full Text Available With the rapid development of e-business, personalized recommendation has become core competence for enterprises to gain profits and improve customer satisfaction. Although collaborative filtering is the most successful approach for building a recommender system, it suffers from “shilling” attacks. In recent years, the research on shilling attacks has been greatly improved. However, the approaches suffer from serious problem in attack model dependency and high computational cost. To solve the problem, an approach for the detection of abnormal item is proposed in this paper. In the paper, two common features of all attack models are analyzed at first. A revised bottom-up discretized approach is then proposed based on time intervals and the features for the detection. The distributions of ratings in different time intervals are compared to detect anomaly based on the calculation of chi square distribution (χ2. We evaluated our approach on four types of items which are defined according to the life cycles of these items. The experimental results show that the proposed approach achieves a high detection rate with low computational cost when the number of attack profiles is more than 15. It improves the efficiency in shilling attacks detection by narrowing down the suspicious users.

Economic production quantity concerning learning and the reworking of imperfect items

Directory of Open Access Journals (Sweden)

Tsai Deng-Maw

2012-01-01

Full Text Available The classical economic production quantity (EPQ model assumes that items produced are of perfect quality and the production rate is constant. However, production quality depends on the condition of the process. Due to process deterioration or other factors, the production process may shift and produce imperfect quality items. These imperfect quality items sometimes can be reworked and repaired; hence, overall production-inventory costs can be reduced significantly. In addition, it can be found in practice that the time or cost required to repetitively produce a unit of a product decreases when the number of units produced by a worker or a group of workers increases. Under this circumstance, the unit production cost cannot be regarded as constant and, therefore, cannot be ignored when taking account of the total cost. This paper incorporates the effects of learning and the reworking of defective items on the EPQ model since they were not considered in existing models. An optimal operation policy that minimizes the expected total cost per unit time is derived. A numerical example is provided to illustrate the proposed model. In addition, sensitivity analysis is performed and discussed.

High reward makes items easier to remember, but harder to bind to a new temporal context

Directory of Open Access Journals (Sweden)

Christopher R Madan

2012-08-01

Full Text Available Learning through reward is central to adaptive behaviour. Indeed, items are remembered better if they are experienced while participants expect a reward, and people can deliberately prioritize memory for high- over low-valued items. Do memory advantages for high-valued items only emerge after deliberate prioritization in encoding? Or, do reward-based memory enhancements also apply to unrewarded memory tests and to implicit memory? First, we tested for a high-value memory advantage in unrewarded implicit and explicit tests (Exp 1. Participants first learned high or low reward values of 36 words, followed by unrewarded lexical decision and free recall tests. High-value words were judged faster in lexical decision, and more often recalled in free recall. These two memory advantages for high-value words were negatively correlated suggesting at least two mechanisms by which reward value can influence later item-memorability. The ease at which the values were originally acquired explained the negative correlation: People who learned values earlier showed reward effects in implicit memory while people who learned values later showed reward effects in explicit memory. We then asked whether a high-value advantage would persist if trained items were linked to a new context (Exps 2a,b. Following the same value training as in Exp 1, participants learned lists composed of previously trained words mixed with new words, each followed by free recall. Thus, participants had to retrieve words only from the most recent list, irrespective of their values. High- and low-value words were recalled equally, but low-value words were recalled earlier than high-value words and high-value words were more often intruded (proactive interference. Thus, the high-value advantage holds for implicit and explicit memory, but comes with a side effect: High-value items are more difficult to relearn in a new context. Similar to emotional arousal, reward value can both enhance and

A Placement Algorithm for Capital Items that Depreciate with Time

International Nuclear Information System (INIS)

Wweru, R.M

1999-01-01

The replacement algorithm is centred on the prediction of the replacement cost and the determination of the most economical replacement policy. For items whose efficiency depreciates over their life spans e.g. machine tools, vehicles et.c; the prediction of costs involves those factors which contribute to increase operating cost, forced idle time, increase scrap, increased repair cost etc. The alternative to increased cost of operating an aging equipment is the cost of replacing the old equipment with a new one. There is some age at which the replacement of the old equipment is more economical than continuation (of the old one) at the increased operating cost (Johnson R D, Siskin B R, 1989). This algorithm uses certain cost relationships that are vital in minimization of total costs and is focused on capital equipment that depreciates with time as opposed to items with a probabilistic life span

Integrated batch production and maintenance scheduling for multiple items processed on a deteriorating machine to minimize total production and maintenance costs with due date constraint

Directory of Open Access Journals (Sweden)

Zahedi Zahedi

2016-04-01

Full Text Available This paper discusses an integrated model of batch production and maintenance scheduling on a deteriorating machine producing multiple items to be delivered at a common due date. The model describes the trade-off between total inventory cost and maintenance cost as the increase of production run length. The production run length is a time bucket between two consecutive preventive maintenance activities. The objective function of the model is to minimize total cost consisting of in process and completed part inventory costs, setup cost, preventive and corrective maintenance costs and rework cost. The problem is to determine the optimal production run length and to schedule the batches obtained from determining the production run length in order to minimize total cost.

An Investigation of Item Type in a Standards-Based Assessment.

Directory of Open Access Journals (Sweden)

Liz Hollingworth

2007-12-01

Full Text Available Large-scale state assessment programs use both multiple-choice and open-ended items on tests for accountability purposes. Certainly, there is an intuitive belief among some educators and policy makers that open-ended items measure something different than multiple-choice items. This study examined two item formats in custom-built, standards-based tests of achievement in Reading and Mathematics at grades 3-8. In this paper, we raise questions about the value of including open-ended items, given scoring costs, time constraints, and the higher probability of missing data from test-takers.

Multi-item economic production quantity model for imperfect items with multiple production setups and rework under the effect of preservation technology and learning environment

Directory of Open Access Journals (Sweden)

Preeti Jawla

2016-09-01

Full Text Available This study aims to investigate the multi-item inventory model in a production/rework system with multiple production setups. Rework can be depicted as the transformation of production rejects, failed, or non-conforming items into re-usable products of the same or lower quality during or after inspection. Rework is very valuable and profitable, especially if materials are limited in availability and also pricey. Moreover, rework can be a good contribution to a ‘green image environment’. In this paper, we establish a multi-item inventory model to determine the optimal inventory replenishment policy for the economic production quantity (EPQ model for imperfect, deteriorating items with multiple productions and rework under inflation and learning environment. In inventory modelling, Inflation plays a very important role. In one cycle, production system produces items in n production setups and one rework setup, i.e. system follows (n, 1 policy. To reduce the deterioration of products preservation technology investment is also considered in this model. Holding cost is taken as time dependent. We develop expressions for the average profit per time unit, including procurement of input materials, costs for production, rework, deterioration cost and storage of serviceable and reworkable lots. Using those expressions, the proposed model is demonstrated numerically and the sensitivity analysis is also performed to study the behaviour of the model.

Evaluation of Northwest University, Kano Post-UTME Test Items Using Item Response Theory

Science.gov (United States)

Bichi, Ado Abdu; Hafiz, Hadiza; Bello, Samira Abdullahi

2016-01-01

High-stakes testing is used for the purposes of providing results that have important consequences. Validity is the cornerstone upon which all measurement systems are built. This study applied the Item Response Theory principles to analyse Northwest University Kano Post-UTME Economics test items. The developed fifty (50) economics test items was…

Development of the Treatment Inventory of Costs in Psychiatric Patients: TIC-P Mini and Midi.

Science.gov (United States)

Timman, Reinier; Bouwmans, Clazien; Busschbach, Jan J V; Hakkaart-van Roijen, Leona

2015-12-01

Medical costs of (psychiatric) illness can be validly measured with patient report questionnaires. These questionnaires comprise many detailed items resulting in lengthy administrations. We set out to find the minimal number of items needed to retrieve 80% and 90% of the costs as measured by the Treatment Inventory of Costs in Patients with psychiatric disorders (TIC-P). The TIC-P is a validated patient-reported outcome measure concerning the utilization of medical care and productivity losses. The present study focused on direct medical costs. We applied data of 7756 TIC-P administrations from three studies in patients with mental health care issues. Items that contribute least to the total cost were eliminated, providing that 80% and 90% of the total cost was retained. Average medical costs per patient were €658 over the last 4 weeks. The distribution of cost was highly skewed, and 5 of the 14 items of the TIC-P accounted for less than 10% of the total costs. The 80% Mini version of the TIC-P required five items: ambulatory services, private practice, day care, general hospital, and psychiatric clinic. The TIC-P Midi 90% inventory required eight items. Both had variance between the three samples in the optimal choice of the items. The number of items of the TIC-P can be reduced considerably while maintaining 80% and 90% of the medical costs estimated by the complete TIC-P. The reduced length makes the questionnaire more suitable for routine outcome monitoring. Copyright © 2015 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Informatization of items quality control for NI in nuclear power plant

International Nuclear Information System (INIS)

Zhang Jiankui; Zang Baiqi

2010-01-01

Design ideas, implementation methods and some key techniques for item quality control of NI in nuclear power plant are illustrated in this article according to item quality management mode. The item quality control method can improve the quality of NI, ensure the safety and lower the construction and operation cost of nuclear power plant. (authors)

Promoting cold-start items in recommender systems.

Science.gov (United States)

Liu, Jin-Hu; Zhou, Tao; Zhang, Zi-Ke; Yang, Zimo; Liu, Chuang; Li, Wei-Min

2014-01-01

As one of the major challenges, cold-start problem plagues nearly all recommender systems. In particular, new items will be overlooked, impeding the development of new products online. Given limited resources, how to utilize the knowledge of recommender systems and design efficient marketing strategy for new items is extremely important. In this paper, we convert this ticklish issue into a clear mathematical problem based on a bipartite network representation. Under the most widely used algorithm in real e-commerce recommender systems, the so-called item-based collaborative filtering, we show that to simply push new items to active users is not a good strategy. Interestingly, experiments on real recommender systems indicate that to connect new items with some less active users will statistically yield better performance, namely, these new items will have more chance to appear in other users' recommendation lists. Further analysis suggests that the disassortative nature of recommender systems contributes to such observation. In a word, getting in-depth understanding on recommender systems could pave the way for the owners to popularize their cold-start products with low costs.

Promoting Cold-Start Items in Recommender Systems

Science.gov (United States)

Liu, Jin-Hu; Zhou, Tao; Zhang, Zi-Ke; Yang, Zimo; Liu, Chuang; Li, Wei-Min

2014-01-01

As one of the major challenges, cold-start problem plagues nearly all recommender systems. In particular, new items will be overlooked, impeding the development of new products online. Given limited resources, how to utilize the knowledge of recommender systems and design efficient marketing strategy for new items is extremely important. In this paper, we convert this ticklish issue into a clear mathematical problem based on a bipartite network representation. Under the most widely used algorithm in real e-commerce recommender systems, the so-called item-based collaborative filtering, we show that to simply push new items to active users is not a good strategy. Interestingly, experiments on real recommender systems indicate that to connect new items with some less active users will statistically yield better performance, namely, these new items will have more chance to appear in other users' recommendation lists. Further analysis suggests that the disassortative nature of recommender systems contributes to such observation. In a word, getting in-depth understanding on recommender systems could pave the way for the owners to popularize their cold-start products with low costs. PMID:25479013

47 CFR 76.985 - Subscriber bill itemization.

Science.gov (United States)

2010-10-01

...) The amount of the total bill assessed as a franchise fee and the identity of the franchising authority... fees and costs itemized pursuant to this section. (c) Local franchising authorities may adopt...

Evaluation of psychometric properties and differential item functioning of 8-item Child Perceptions Questionnaires using item response theory.

Science.gov (United States)

Yau, David T W; Wong, May C M; Lam, K F; McGrath, Colman

2015-08-19

Four-factor structure of the two 8-item short forms of Child Perceptions Questionnaire CPQ11-14 (RSF:8 and ISF:8) has been confirmed. However, the sum scores are typically reported in practice as a proxy of Oral health-related Quality of Life (OHRQoL), which implied a unidimensional structure. This study first assessed the unidimensionality of 8-item short forms of CPQ11-14. Item response theory (IRT) was employed to offer an alternative and complementary approach of validation and to overcome the limitations of classical test theory assumptions. A random sample of 649 12-year-old school children in Hong Kong was analyzed. Unidimensionality of the scale was tested by confirmatory factor analysis (CFA), principle component analysis (PCA) and local dependency (LD) statistic. Graded response model was fitted to the data. Contribution of each item to the scale was assessed by item information function (IIF). Reliability of the scale was assessed by test information function (TIF). Differential item functioning (DIF) across gender was identified by Wald test and expected score functions. Both CPQ11-14 RSF:8 and ISF:8 did not deviate much from the unidimensionality assumption. Results from CFA indicated acceptable fit of the one-factor model. PCA indicated that the first principle component explained >30 % of the total variation with high factor loadings for both RSF:8 and ISF:8. Almost all LD statistic items suggesting little contribution of information to the scale and item removal caused little practical impact. Comparing the TIFs, RSF:8 showed slightly better information than ISF:8. In addition to oral symptoms items, the item "Concerned with what other people think" demonstrated a uniform DIF (p Items related to oral symptoms were not informative to OHRQoL and deletion of these items is suggested. The impact of DIF across gender on the overall score was minimal. CPQ11-14 RSF:8 performed slightly better than ISF:8 in measurement precision. The 6-item short forms

Human resource management in the delivery of postal items

Directory of Open Access Journals (Sweden)

Kujačić Momčilo D.

2015-01-01

Full Text Available Delivery of postal items is the last phase in the postal conveyance process. This phase involved up to 57% in total costs of postal items conveyance. In order to reduce the costs of delivery phase, postal organizations apply different methods and techniques. Legal and technological regulations, various restrictions regarding the selection and deployment of employees influence the choice of appropriate methods. Also, the principle of availability of the universal postal service is an essential factor in defining the optimal model. In this paper, the model for assessing and planning of the number of employees in the delivery service observed postal operator has been proposed, with respect to the principles of productivity and accessibility constraints of the universal postal service. This paper will analyze the impact of daily fluctuations in the number of full-time employees and the possibility of hiring a part-time workers in the days with increased traffic volume in the delivery of items, when usually the items from large customers are delivered.

Cost awareness among doctors in an Irish university-affiliated teaching hospital

Directory of Open Access Journals (Sweden)

William H.C. Tiong

2011-11-01

Full Text Available Previous studies in USA and Canada have found that physicians and physicians in training have a limited understanding of medical care costs. In this study, we set out to survey all grades of doctors in the surgical department, emergency department, and anaesthetic department in a university-affiliated, Irish teaching hospital. Open-ended questionnaires on cost of 25 routinely used items in the hospital were sent to each department. The aims of the study were to assess the present knowledge of cost among the various grades of doctors, and to evaluate the level of professional experience on cost awareness and their confidence in their estimates. We had an overall response rate of 56.8% with 68.5% of doctors admitted to have estimated more than 90% of their responses. Ninety three percent of doctors have no confidence in their estimates on cost of listed items. We found that the lack of cost awareness was universal among doctors of all grades (P = 0.236. The doctors in our study population showed a high level of inaccuracy on their estimates of cost of routinely used items with 84% of the items overestimated. Our results were discouraging and demonstrated that considerable educational activity will be necessary if doctors are to be more cost effective in meeting the national health care budget.

Item-focussed Trees for the Identification of Items in Differential Item Functioning.

Science.gov (United States)

Tutz, Gerhard; Berger, Moritz

2016-09-01

A novel method for the identification of differential item functioning (DIF) by means of recursive partitioning techniques is proposed. We assume an extension of the Rasch model that allows for DIF being induced by an arbitrary number of covariates for each item. Recursive partitioning on the item level results in one tree for each item and leads to simultaneous selection of items and variables that induce DIF. For each item, it is possible to detect groups of subjects with different item difficulties, defined by combinations of characteristics that are not pre-specified. The way a DIF item is determined by covariates is visualized in a small tree and therefore easily accessible. An algorithm is proposed that is based on permutation tests. Various simulation studies, including the comparison with traditional approaches to identify items with DIF, show the applicability and the competitive performance of the method. Two applications illustrate the usefulness and the advantages of the new method.

Use of other industry standards to facilitate the procurement and dedication of commercial-grade items

International Nuclear Information System (INIS)

Beard, R.L.; Rosch, F.C.; Sanwarwalla, M.H.; Tjernlund, R.M.

1994-01-01

Nuclear utilities are embarking on innovative approaches for reducing costs in all aspects of engineering, operation, maintenance, and procurement to produce power cheaply and efficiently and remain competitive with other power producers. In the area of procurement, utilities are increasingly obtaining commercial-grade items for use in safety-related applications. This trend is occurring because of lack of suppliers capable or willing to meet 10 CFR 21 and 10 CFR 50 App. B requirements and because of the absence of original equipment suppliers or the spiraling cost associated with procuring items' basic components safety-related from original suppliers. Utilities have been looking at ways to reduce procurement costs. One promising means to reduce costs is to utilize information provided in other nonnuclear industry standards regarding the specification, control, manufacture, and acceptance of the critical characteristics required of the item to perform its design function. A task force was instituted under the sponsorship of the Electric Power Research Institute to investigate the feasibility of using items manufactured to other industry standards in nuclear safety-related applications. This investigation looked at a broad spectrum of available industry standards pertaining to the design, function, manufacture, and testing of items and determined that some standards are more useful than others. This paper discusses the results of this investigation and how credit from the controls exercised for items manufactured to certain existing industry standards can be taken to minimize dedication costs

Reduced-Item Food Audits Based on the Nutrition Environment Measures Surveys.

Science.gov (United States)

Partington, Susan N; Menzies, Tim J; Colburn, Trina A; Saelens, Brian E; Glanz, Karen

2015-10-01

The community food environment may contribute to obesity by influencing food choice. Store and restaurant audits are increasingly common methods for assessing food environments, but are time consuming and costly. A valid, reliable brief measurement tool is needed. The purpose of this study was to develop and validate reduced-item food environment audit tools for stores and restaurants. Nutrition Environment Measures Surveys for stores (NEMS-S) and restaurants (NEMS-R) were completed in 820 stores and 1,795 restaurants in West Virginia, San Diego, and Seattle. Data mining techniques (correlation-based feature selection and linear regression) were used to identify survey items highly correlated to total survey scores and produce reduced-item audit tools that were subsequently validated against full NEMS surveys. Regression coefficients were used as weights that were applied to reduced-item tool items to generate comparable scores to full NEMS surveys. Data were collected and analyzed in 2008-2013. The reduced-item tools included eight items for grocery, ten for convenience, seven for variety, and five for other stores; and 16 items for sit-down, 14 for fast casual, 19 for fast food, and 13 for specialty restaurants-10% of the full NEMS-S and 25% of the full NEMS-R. There were no significant differences in median scores for varying types of retail food outlets when compared to the full survey scores. Median in-store audit time was reduced 25%-50%. Reduced-item audit tools can reduce the burden and complexity of large-scale or repeated assessments of the retail food environment without compromising measurement quality. Copyright © 2015 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

PHENIX WBS notes. Cost and schedule review copy

Energy Technology Data Exchange (ETDEWEB)

1994-02-01

The Work Breakdown Structure (WBS) Book begins with this Overview section, which contains the high-level summary cost estimate, the cost profile, and the global construction schedule. The summary cost estimate shows the total US cost and the cost in terms of PHENIX construction funds for building the PHENIX detector. All costs in the WBS book are shown in FY 1993 dollars. Also shown are the institutional and foreign contributions, the level of pre-operations funding, and the cost of deferred items. Pie charts are presented at PHENIX WBS level 1 and 2 that show this information. The PHENIX construction funds are shown broken down to PHENIX WBS level 3 items per fiscal year, and the resulting profile is compared to the RHIC target profile. An accumulated difference of the two profiles is also shown. The PHENIX global construction schedule is presented at the end of the Overview section. Following the Overview are sections for each subsystem. Each subsystem section begins with a summary cost estimate, cost profile, and critical path. The total level 3 cost is broken down into fixed costs (M&S), engineering costs (EDIA) and labor costs. Costs are further broken down in terms of PHENIX construction funds, institutional and foreign contributions, pre-operations funding, and deferred items. Also shown is the contingency at level 3 and the level 4 breakdown of the total cost. The cost profile in fiscal years is shown at level 3. The subsystem summaries are followed by the full cost estimate and schedule sheets for that subsystem. These detailed sheets are typically carried down to level 7 or 8. The cost estimate Total, M&S, EDIA, and Labor breakdowns, as well as contingency, for each WBS entry.

High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware

Science.gov (United States)

Gardner, John M.; Stelter, Christopher J.; Yashin, Edward A.; Siochi, Emilie J.

2016-01-01

Additive manufacturing (or 3D printing) via Fused Filament Fabrication (FFF), also known as Fused Deposition Modeling (FDM), is a process where material is placed in specific locations layer-by-layer to create a complete part. Printers designed for FFF build parts by extruding a thermoplastic filament from a nozzle in a predetermined path. Originally developed for commercial printers, 3D printing via FFF has become accessible to a much larger community of users since the introduction of Reprap printers. These low-cost, desktop machines are typically used to print prototype parts or novelty items. As the adoption of desktop sized 3D printers broadens, there is increased demand for these machines to produce functional parts that can withstand harsher conditions such as high temperature and mechanical loads. Materials meeting these requirements tend to possess better mechanical properties and higher glass transition temperatures (Tg), thus requiring printers with high temperature printing capability. This report outlines the problems and solutions, and includes a detailed description of the machine design, printing parameters, and processes specific to high temperature thermoplastic 3D printing.

Pricing policy for declining demand using item preservation technology.

Science.gov (United States)

Khedlekar, Uttam Kumar; Shukla, Diwakar; Namdeo, Anubhav

2016-01-01

We have designed an inventory model for seasonal products in which deterioration can be controlled by item preservation technology investment. Demand for the product is considered price sensitive and decreases linearly. This study has shown that the profit is a concave function of optimal selling price, replenishment time and preservation cost parameter. We simultaneously determined the optimal selling price of the product, the replenishment cycle and the cost of item preservation technology. Additionally, this study has shown that there exists an optimal selling price and optimal preservation investment to maximize the profit for every business set-up. Finally, the model is illustrated by numerical examples and sensitive analysis of the optimal solution with respect to major parameters.

Item validity vs. item discrimination index: a redundancy?

Science.gov (United States)

Panjaitan, R. L.; Irawati, R.; Sujana, A.; Hanifah, N.; Djuanda, D.

2018-03-01

In several literatures about evaluation and test analysis, it is common to find that there are calculations of item validity as well as item discrimination index (D) with different formula for each. Meanwhile, other resources said that item discrimination index could be obtained by calculating the correlation between the testee’s score in a particular item and the testee’s score on the overall test, which is actually the same concept as item validity. Some research reports, especially undergraduate theses tend to include both item validity and item discrimination index in the instrument analysis. It seems that these concepts might overlap for both reflect the test quality on measuring the examinees’ ability. In this paper, examples of some results of data processing on item validity and item discrimination index were compared. It would be discussed whether item validity and item discrimination index can be represented by one of them only or it should be better to present both calculations for simple test analysis, especially in undergraduate theses where test analyses were included.

A novel multi-item joint replenishment problem considering multiple type discounts.

Directory of Open Access Journals (Sweden)

Ligang Cui

Full Text Available In business replenishment, discount offers of multi-item may either provide different discount schedules with a single discount type, or provide schedules with multiple discount types. The paper investigates the joint effects of multiple discount schemes on the decisions of multi-item joint replenishment. In this paper, a joint replenishment problem (JRP model, considering three discount (all-unit discount, incremental discount, total volume discount offers simultaneously, is constructed to determine the basic cycle time and joint replenishment frequencies of multi-item. To solve the proposed problem, a heuristic algorithm is proposed to find the optimal solutions and the corresponding total cost of the JRP model. Numerical experiment is performed to test the algorithm and the computational results of JRPs under different discount combinations show different significance in the replenishment cost reduction.

48 CFR 52.216-15 - Predetermined Indirect Cost Rates.

Science.gov (United States)

2010-10-01

.... (c) Allowability of costs and acceptability of cost allocation methods shall be determined in...) the period for which the rates apply, and (4) the specific items treated as direct costs or any changes in the items previously agreed to be direct costs. The indirect cost rate agreement shall not...

5 CFR 591.212 - How does OPM select survey items?

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false How does OPM select survey items? 591.212 Section 591.212 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS ALLOWANCES AND DIFFERENTIALS Cost-of-Living Allowance and Post Differential-Nonforeign Areas Cost-Of-Living...

The development of automaticity in short-term memory search: Item-response learning and category learning.

Science.gov (United States)

Cao, Rui; Nosofsky, Robert M; Shiffrin, Richard M

2017-05-01

In short-term-memory (STM)-search tasks, observers judge whether a test probe was present in a short list of study items. Here we investigated the long-term learning mechanisms that lead to the highly efficient STM-search performance observed under conditions of consistent-mapping (CM) training, in which targets and foils never switch roles across trials. In item-response learning, subjects learn long-term mappings between individual items and target versus foil responses. In category learning, subjects learn high-level codes corresponding to separate sets of items and learn to attach old versus new responses to these category codes. To distinguish between these 2 forms of learning, we tested subjects in categorized varied mapping (CV) conditions: There were 2 distinct categories of items, but the assignment of categories to target versus foil responses varied across trials. In cases involving arbitrary categories, CV performance closely resembled standard varied-mapping performance without categories and departed dramatically from CM performance, supporting the item-response-learning hypothesis. In cases involving prelearned categories, CV performance resembled CM performance, as long as there was sufficient practice or steps taken to reduce trial-to-trial category-switching costs. This pattern of results supports the category-coding hypothesis for sufficiently well-learned categories. Thus, item-response learning occurs rapidly and is used early in CM training; category learning is much slower but is eventually adopted and is used to increase the efficiency of search beyond that available from item-response learning. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

PHENIX Work Breakdown Structure. Cost and schedule review copy

Energy Technology Data Exchange (ETDEWEB)

1994-02-01

The Work Breakdown Structure (WBS) Book begins with this Overview section, which contains the high-level summary cost estimate, the cost profile, and the global construction schedule. The summary cost estimate shows the total US cost and the cost in terms of PHENIX construction funds for building the PHENIX detector. All costs in the WBS book are shown in FY 1993 dollars. Also shown are the institutional and foreign contributions, the level of pre-operations funding, and the cost of deferred items. Pie charts are presented at PHENIX WBS level 1 and 2 that show this information. The PHENIX construction funds are shown broken down to PHENIX WBS level 3 items per fiscal year, and the resulting profile is compared to the RHIC target profile. An accumulated difference of the two profiles is also shown. The PHENIX global construction schedule is presented at the end of the Overview section. Following the Overview are sections for each subsystem. Each subsystem section begins with a summary cost estimate, cost profile, and critical path. The total level 3 cost is broken down into fixed costs (M&S), engineering costs (EDIA) and labor costs. Costs are further broken down in terms of PHENIX construction funds, institutional and foreign contributions, pre-operations funding, and deferred items. Also shown is the contingency at level 3 and the level 4 breakdown of the total cost. The cost profile in fiscal years is shown at level 3. The subsystem summaries are followed by the full cost estimate and schedule sheets for that subsystem. These detailed sheets are typically carried down to level 7 or 8. The cost estimate shows Total, M&S, EDIA, and Labor breakdowns, as well as contingency, for each WBS entry.

High-Dimensional Exploratory Item Factor Analysis by a Metropolis-Hastings Robbins-Monro Algorithm

Science.gov (United States)

Cai, Li

2010-01-01

A Metropolis-Hastings Robbins-Monro (MH-RM) algorithm for high-dimensional maximum marginal likelihood exploratory item factor analysis is proposed. The sequence of estimates from the MH-RM algorithm converges with probability one to the maximum likelihood solution. Details on the computer implementation of this algorithm are provided. The…

A note on "An economic order quantity (EOQ for items with imperfect quality and inspection errors"

Directory of Open Access Journals (Sweden)

Lie-Fern Hsu

2012-08-01

Full Text Available In a previously published paper by Khan et al. (2011 [Khan, M., Jaber, M.Y., & Bonney M. (2011. An economic order quantity (EOQ for items with imperfect quality and inspection errors, International Journal of Production Economics, 133, 113-118], we found that there is a contradiction between the cycle length and the holding cost per cycle. To obtain the cycle length, the authors assumed that the returned items from the market were replaced with good quality items. However, for the holding cost per cycle, the authors implicitly assumed that the returned items were not replaced by good quality items. In this note, we first point out the contradiction. Then we fix this flaw and develop a corrected EOQ.

Construction cost forecast model : model documentation and technical notes.

Science.gov (United States)

2013-05-01

Construction cost indices are generally estimated with Laspeyres, Paasche, or Fisher indices that allow changes : in the quantities of construction bid items, as well as changes in price to change the cost indices of those items. : These cost indices...

2 CFR Appendix B to Part 230 - Selected Items of Cost

Science.gov (United States)

2010-01-01

... PRINCIPLES FOR NON-PROFIT ORGANIZATIONS (OMB CIRCULAR A-122) Pt. 230, App. B Appendix B to Part 230—Selected... use of patents and copyrights 45. Selling and marketing 46. Specialized service facilities 47. Taxes... of this appendix provide principles to be applied in establishing the allowability of certain items...

Using automatic item generation to create multiple-choice test items.

Science.gov (United States)

Gierl, Mark J; Lai, Hollis; Turner, Simon R

2012-08-01

Many tests of medical knowledge, from the undergraduate level to the level of certification and licensure, contain multiple-choice items. Although these are efficient in measuring examinees' knowledge and skills across diverse content areas, multiple-choice items are time-consuming and expensive to create. Changes in student assessment brought about by new forms of computer-based testing have created the demand for large numbers of multiple-choice items. Our current approaches to item development cannot meet this demand. We present a methodology for developing multiple-choice items based on automatic item generation (AIG) concepts and procedures. We describe a three-stage approach to AIG and we illustrate this approach by generating multiple-choice items for a medical licensure test in the content area of surgery. To generate multiple-choice items, our method requires a three-stage process. Firstly, a cognitive model is created by content specialists. Secondly, item models are developed using the content from the cognitive model. Thirdly, items are generated from the item models using computer software. Using this methodology, we generated 1248 multiple-choice items from one item model. Automatic item generation is a process that involves using models to generate items using computer technology. With our method, content specialists identify and structure the content for the test items, and computer technology systematically combines the content to generate new test items. By combining these outcomes, items can be generated automatically. © Blackwell Publishing Ltd 2012.

Examining the Effects of a Low-Cost Prompt to Reduce Retail Theft

Science.gov (United States)

Rafacz, Sharlet D.; Boyce, Thomas E.; Williams, W. Larry

2011-01-01

The present study evaluated the extent to which a low-cost, antitheft intervention impacted theft and sales in a multiple baseline design across two grocery stores. Previous research has measured the impact on theft of items that have a sign indicating their high theft rate and stickers next to or on the items. In contrast, this study tracked four…

Model EPQ Multi Item yang Dimodifikasi untuk Dua Permintaan secara Simultan

Directory of Open Access Journals (Sweden)

Taufiq Rahman

2017-05-01

Full Text Available Inventory is one of many factors of the business operation that need to be controlled by industries in order to improve efficiency, enhance productivity, and decrease the holding cost. The holding cost of inventories in supply chain contribute to 20% - 40% of the product value. It can be controlled by applying appropriate inventory model, such as EPQ/Economic Production Quantity and EOQ/Economic Order Quantity. EPQ is an inventory model that used to determine the optimum production lot size with balanced the production setup cost and holding cost. Even the classic EPQ has applied widely in industries, the assumption used by this model differed between the researchers whether it is continuous or discrete demand, because the multi delivery or discrete demand is mostly used by industries. Even so, there are industries that used both continuous and discrete demand simultaneously. Based on previous research, there was an advanced EPQ model that synchronizing both assumptions simultaneously, but it still addressed single item problem. Since almost the industries produced multi item, this model has lack of applicability. Therefore, this research proposed a multi item EPQ Model that synchronizing continuous and discrete demand simultaneously. The solution procedure that used in this proposed model are classical calculus method/differential calculus and simultaneous approach. A numerical example is given to show the effectiveness of the proposed approach based on the data from the literature.

Development of coordination system model on single-supplier multi-buyer for multi-item supply chain with probabilistic demand

Science.gov (United States)

Olivia, G.; Santoso, A.; Prayogo, D. N.

2017-11-01

Nowadays, the level of competition between supply chains is getting tighter and a good coordination system between supply chains members is very crucial in solving the issue. This paper focused on a model development of coordination system between single supplier and buyers in a supply chain as a solution. Proposed optimization model was designed to determine the optimal number of deliveries from a supplier to buyers in order to minimize the total cost over a planning horizon. Components of the total supply chain cost consist of transportation costs, handling costs of supplier and buyers and also stock out costs. In the proposed optimization model, the supplier can supply various types of items to retailers whose item demand patterns are probabilistic. Sensitivity analysis of the proposed model was conducted to test the effect of changes in transport costs, handling costs and production capacities of the supplier. The results of the sensitivity analysis showed a significant influence on the changes in the transportation cost, handling costs and production capacity to the decisions of the optimal numbers of product delivery for each item to the buyers.

Applying Hierarchical Model Calibration to Automatically Generated Items.

Science.gov (United States)

Williamson, David M.; Johnson, Matthew S.; Sinharay, Sandip; Bejar, Isaac I.

This study explored the application of hierarchical model calibration as a means of reducing, if not eliminating, the need for pretesting of automatically generated items from a common item model prior to operational use. Ultimately the successful development of automatic item generation (AIG) systems capable of producing items with highly similar…

Entry-Item-Quantity-ABC Analysis-Based Multitype Cigarette Fast Sorting System

Directory of Open Access Journals (Sweden)

Ying Zhao

2012-01-01

Full Text Available Numerous items, small order, and frequent delivery are the characteristics of many distribution centers. Such characteristics generally increase the operating costs of the distribution center. To remedy this problem, this study employs the Entry-Item-Quantity (EIQ method to identify the characteristic of the cigarette distribution center and further analyzes the importance degree of customers and the frequently ordered products by means of EQ/EN/IQ-B/IK statistic charts. Based on these analyses as well as the total replenishment cost optimization model, multipicking strategies and combined multitype picking equipment allocation is then formulated accordingly. With such design scheme, the cigarette picking costs of the distribution center are expected to reduce. Finally, the specific number of equipment is figured out in order to meet the capability demand of the case cigarette distribution center.

The Role of Item Models in Automatic Item Generation

Science.gov (United States)

Gierl, Mark J.; Lai, Hollis

2012-01-01

Automatic item generation represents a relatively new but rapidly evolving research area where cognitive and psychometric theories are used to produce tests that include items generated using computer technology. Automatic item generation requires two steps. First, test development specialists create item models, which are comparable to templates…

Low-cost high purity production

Science.gov (United States)

Kapur, V. K.

1978-01-01

Economical process produces high-purity silicon crystals suitable for use in solar cells. Reaction is strongly exothermic and can be initiated at relatively low temperature, making it potentially suitable for development into low-cost commercial process. Important advantages include exothermic character and comparatively low process temperatures. These could lead to significant savings in equipment and energy costs.

Assessing item fit for unidimensional item response theory models using residuals from estimated item response functions.

Science.gov (United States)

Haberman, Shelby J; Sinharay, Sandip; Chon, Kyong Hee

2013-07-01

Residual analysis (e.g. Hambleton & Swaminathan, Item response theory: principles and applications, Kluwer Academic, Boston, 1985; Hambleton, Swaminathan, & Rogers, Fundamentals of item response theory, Sage, Newbury Park, 1991) is a popular method to assess fit of item response theory (IRT) models. We suggest a form of residual analysis that may be applied to assess item fit for unidimensional IRT models. The residual analysis consists of a comparison of the maximum-likelihood estimate of the item characteristic curve with an alternative ratio estimate of the item characteristic curve. The large sample distribution of the residual is proved to be standardized normal when the IRT model fits the data. We compare the performance of our suggested residual to the standardized residual of Hambleton et al. (Fundamentals of item response theory, Sage, Newbury Park, 1991) in a detailed simulation study. We then calculate our suggested residuals using data from an operational test. The residuals appear to be useful in assessing the item fit for unidimensional IRT models.

Optimal lot sizing in screening processes with returnable defective items

Science.gov (United States)

Vishkaei, Behzad Maleki; Niaki, S. T. A.; Farhangi, Milad; Rashti, Mehdi Ebrahimnezhad Moghadam

2014-07-01

This paper is an extension of Hsu and Hsu (Int J Ind Eng Comput 3(5):939-948, 2012) aiming to determine the optimal order quantity of product batches that contain defective items with percentage nonconforming following a known probability density function. The orders are subject to 100 % screening process at a rate higher than the demand rate. Shortage is backordered, and defective items in each ordering cycle are stored in a warehouse to be returned to the supplier when a new order is received. Although the retailer does not sell defective items at a lower price and only trades perfect items (to avoid loss), a higher holding cost incurs to store defective items. Using the renewal-reward theorem, the optimal order and shortage quantities are determined. Some numerical examples are solved at the end to clarify the applicability of the proposed model and to compare the new policy to an existing one. The results show that the new policy provides better expected profit per time.

Problems with the factor analysis of items: Solutions based on item response theory and item parcelling

Directory of Open Access Journals (Sweden)

Gideon P. De Bruin

2004-10-01

Full Text Available The factor analysis of items often produces spurious results in the sense that unidimensional scales appear multidimensional. This may be ascribed to failure in meeting the assumptions of linearity and normality on which factor analysis is based. Item response theory is explicitly designed for the modelling of the non-linear relations between ordinal variables and provides a strong alternative to the factor analysis of items. Items may also be combined in parcels that are more likely to satisfy the assumptions of factor analysis than do the items. The use of the Rasch rating scale model and the factor analysis of parcels is illustrated with data obtained with the Locus of Control Inventory. The results of these analyses are compared with the results obtained through the factor analysis of items. It is shown that the Rasch rating scale model and the factoring of parcels produce superior results to the factor analysis of items. Recommendations for the analysis of scales are made. Opsomming Die faktorontleding van items lewer dikwels misleidende resultate op, veral in die opsig dat eendimensionele skale as meerdimensioneel voorkom. Hierdie resultate kan dikwels daaraan toegeskryf word dat daar nie aan die aannames van lineariteit en normaliteit waarop faktorontleding berus, voldoen word nie. Itemresponsteorie, wat eksplisiet vir die modellering van die nie-liniêre verbande tussen ordinale items ontwerp is, bied ’n aantreklike alternatief vir die faktorontleding van items. Items kan ook in pakkies gegroepeer word wat meer waarskynlik aan die aannames van faktorontleding voldoen as individuele items. Die gebruik van die Rasch beoordelingskaalmodel en die faktorontleding van pakkies word aan die hand van data wat met die Lokus van Beheervraelys verkry is, gedemonstreer. Die resultate van hierdie ontledings word vergelyk met die resultate wat deur ‘n faktorontleding van die individuele items verkry is. Die resultate dui daarop dat die Rasch

Fuzzy inventory model for deteriorating items, with time depended demand, shortages, and fully backlogging

OpenAIRE

Wasim Akram Mandal; Sahidul Islam

2016-01-01

In this paper analyzes fuzzy inventory system for deterioration item with time depended demand. Shortages are allowed under fully backlogged. Fixed cost, deterioration cost, shortages cost, holding cost are the cost considered in this model. Fuzziness is applying by allowing the cost components (holding cost, deterioration, shortage cost, holding cost, etc). In fuzzy environment it considered all required parameter to be triangular fuzzy numbers. One numerical solution of the model is obtaine...

Item information and discrimination functions for trinary PCM items

NARCIS (Netherlands)

Akkermans, Wies; Muraki, Eiji

1997-01-01

For trinary partial credit items the shape of the item information and the item discrimination function is examined in relation to the item parameters. In particular, it is shown that these functions are unimodal if δ2 – δ1 < 4 ln 2 and bimodal otherwise. The locations and values of the maxima are

Small Habitat Commonality Reduces Cost for Human Mars Missions

Science.gov (United States)

Griffin, Brand N.; Lepsch, Roger; Martin, John; Howard, Robert; Rucker, Michelle; Zapata, Edgar; McCleskey, Carey; Howe, Scott; Mary, Natalie; Nerren, Philip (Inventor)

2015-01-01

Most view the Apollo Program as expensive. It was. But, a human mission to Mars will be orders of magnitude more difficult and costly. Recently, NASA's Evolvable Mars Campaign (EMC) mapped out a step-wise approach for exploring Mars and the Mars-moon system. It is early in the planning process but because approximately 80% of the total life cycle cost is committed during preliminary design, there is an effort to emphasize cost reduction methods up front. Amongst the options, commonality across small habitat elements shows promise for consolidating the high bow-wave costs of Design, Development, Test and Evaluation (DDT&E) while still accommodating each end-item's functionality. In addition to DDT&E, there are other cost and operations benefits to commonality such as reduced logistics, simplified infrastructure integration and with inter-operability, improved safety and simplified training. These benefits are not without a cost. Some habitats are sub-optimized giving up unique attributes for the benefit of the overall architecture and because the first item sets the course for those to follow, rapidly developing technology may be excluded. The small habitats within the EMC include the pressurized crew cabins for the ascent vehicle,

Costs of disposable material in the operating room do not show high correlation with surgical time: Implications for hospital payment.

Science.gov (United States)

Delo, Caroline; Leclercq, Pol; Martins, Dimitri; Pirson, Magali

2015-08-01

The objectives of this study are to analyze the variation of the surgical time and of disposable costs per surgical procedure and to analyze the association between disposable costs and the surgical time. The registration of data was done in an operating room of a 419 bed general hospital, over a period of three months (n = 1556 surgical procedures). Disposable material per procedure used was recorded through a barcode scanning method. The average cost (standard deviation) of disposable material is €183.66 (€183.44). The mean surgical time (standard deviation) is 96 min (63). Results have shown that the homogeneity of operating time and DM costs was quite good per surgical procedure. The correlation between the surgical time and DM costs is not high (r = 0.65). In a context of Diagnosis Related Group (DRG) based hospital payment, it is important that costs information systems are able to precisely calculate costs per case. Our results show that the correlation between surgical time and costs of disposable materials is not good. Therefore, empirical data or itemized lists should be used instead of surgical time as a cost driver for the allocation of costs of disposable materials to patients. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

A Model for Predicting the Repair Costs of U.S. Navy Inventory Items

National Research Council Canada - National Science Library

Tan, Jeffrey

2003-01-01

.... Navy inventory items. The thesis examines several prediction methodologies, including a ratio-estimator prediction method that is a modification of the methodology currently in use, as well as regression analysis...

17 CFR 229.904 - (Item 904) Risk factors and other considerations.

Science.gov (United States)

2010-04-01

... partnerships is identified as a potential benefit of the roll-up transaction, the amount of cost savings and a comparison of such amount to the costs of the roll-up transaction; and (ii) If there may be a material... 1934 AND ENERGY POLICY AND CONSERVATION ACT OF 1975-REGULATION S-K Roll-Up Transactions § 229.904 (Item...

Item level diagnostics and model - data fit in item response theory ...

African Journals Online (AJOL)

Item response theory (IRT) is a framework for modeling and analyzing item response data. Item-level modeling gives IRT advantages over classical test theory. The fit of an item score pattern to an item response theory (IRT) models is a necessary condition that must be assessed for further use of item and models that best fit ...

Cost of elective percutaneous coronary intervention in Malaysia: a multicentre cross-sectional costing study.

Science.gov (United States)

Lee, Kun Yun; Ong, Tiong Kiam; Low, Ee Vien; Liow, Siow Yen; Anchah, Lawrence; Hamzah, Syuhada; Liew, Houng Bang; Ali, Rosli Mohd; Ismail, Omar; Ahmad, Wan Azman Wan; Said, Mas Ayu; Dahlui, Maznah

2017-05-28

Limitations in the quality and access of cost data from low-income and middle-income countries constrain the implementation of economic evaluations. With the increasing prevalence of coronary artery disease in Malaysia, cost information is vital for cardiac service expansion. We aim to calculate the hospitalisation cost of percutaneous coronary intervention (PCI), using a data collection method customised to local setting of limited data availability. This is a cross-sectional costing study from the perspective of healthcare providers, using top-down approach, from January to June 2014. Cost items under each unit of analysis involved in the provision of PCI service were identified, valuated and calculated to produce unit cost estimates. Five public cardiac centres participated. All the centres provide full-fledged cardiology services. They are also the tertiary referral centres of their respective regions. The cost was calculated for elective PCI procedure in each centre. PCI conducted for urgent/emergent indication or for patients with shock and haemodynamic instability were excluded. The outcome measures of interest were the unit costs at the two units of analysis, namely cardiac ward admission and cardiac catheterisation utilisation, which made up the total hospitalisation cost. The average hospitalisation cost ranged between RM11 471 (US$3186) and RM14 465 (US$4018). PCI consumables were the dominant cost item at all centres. The centre with daycare establishment recorded the lowest admission cost and total hospitalisation cost. Comprehensive results from all centres enable comparison at the levels of cost items, unit of analysis and total costs. This generates important information on cost variations between centres, thus providing valuable guidance for service planning. Alternative procurement practices for PCI consumables may deliver cost reduction. For countries with limited data availability, costing method tailored based on country setting can be used for

7 CFR 249.12 - SFMNP costs.

Science.gov (United States)

2010-01-01

... 7 Agriculture 4 2010-01-01 2010-01-01 false SFMNP costs. 249.12 Section 249.12 Agriculture....12 SFMNP costs. (a) General. (1) Composition of allowable costs. In general, a cost item will be... administration and operation of the SFMNP. Allowable SFMNP costs may be classified as follows: (i) Food costs and...

Assessing errors related to characteristics of the items measured

International Nuclear Information System (INIS)

Liggett, W.

1980-01-01

Errors that are related to some intrinsic property of the items measured are often encountered in nuclear material accounting. An example is the error in nondestructive assay measurements caused by uncorrected matrix effects. Nuclear material accounting requires for each materials type one measurement method for which bounds on these errors can be determined. If such a method is available, a second method might be used to reduce costs or to improve precision. If the measurement error for the first method is longer-tailed than Gaussian, then precision might be improved by measuring all items by both methods. 8 refs

Item Unique Identification Capability Expansion: Established Process Analysis, Cost Benefit Analysis, and Optimal Marking Procedures

Science.gov (United States)

2014-12-01

why a legacy item should only be marked with nonintrusive marking is that we do not want to compromise the metallurgy integrity of the item, if the... welding of steel plate should be considered among the most permanent. Using labels, which are available in a variety of materials and can be applied...shatter, or retain shape after impact.  Real estate that is within a distance of four times the material depth from any edge, weld , or forming

Space construction system analysis. Part 2: Cost and programmatics

Science.gov (United States)

Vonflue, F. W.; Cooper, W.

1980-01-01

Cost and programmatic elements of the space construction systems analysis study are discussed. The programmatic aspects of the ETVP program define a comprehensive plan for the development of a space platform, the construction system, and the space shuttle operations/logistics requirements. The cost analysis identified significant items of cost on ETVP development, ground, and flight segments, and detailed the items of space construction equipment and operations.

Examination of the PROMIS upper extremity item bank.

Science.gov (United States)

Hung, Man; Voss, Maren W; Bounsanga, Jerry; Crum, Anthony B; Tyser, Andrew R

Clinical measurement. The psychometric properties of the PROMIS v1.2 UE item bank were tested on various samples prior to its release, but have not been fully evaluated among the orthopaedic population. This study assesses the performance of the UE item bank within the UE orthopaedic patient population. The UE item bank was administered to 1197 adult patients presenting to a tertiary orthopaedic clinic specializing in hand and UE conditions and was examined using traditional statistics and Rasch analysis. The UE item bank fits a unidimensional model (outfit MNSQ range from 0.64 to 1.70) and has adequate reliabilities (person = 0.84; item = 0.82) and local independence (item residual correlations range from -0.37 to 0.34). Only one item exhibits gender differential item functioning. Most items target low levels of function. The UE item bank is a useful clinical assessment tool. Additional items covering higher functions are needed to enhance validity. Supplemental testing is recommended for patients at higher levels of function until more high function UE items are developed. 2c. Copyright © 2016 Hanley & Belfus. Published by Elsevier Inc. All rights reserved.

High-cost users of medical care

OpenAIRE

Garfinkel, Steven A.; Riley, Gerald F.; Iannacchione, Vincent G.

1988-01-01

Based on data from the National Medical Care Utilization and Expenditure Survey, the 10 percent of the noninstitutionalized U.S. population that incurred the highest medical care charges was responsible for 75 percent of all incurred charges. Health status was the strongest predictor of high-cost use, followed by economic factors. Persons 65 years of age or over incurred far higher costs than younger persons and had higher out-of-pocket costs, absolutely and as a percentage of income, althoug...

The Influence of Item Properties on Association-Memory

Science.gov (United States)

Madan, Christopher R.; Glaholt, Mackenzie G.; Caplan, Jeremy B.

2010-01-01

Word properties like imageability and word frequency improve cued recall of verbal paired-associates. We asked whether these enhancements follow simply from prior effects on item-memory, or also strengthen associations between items. Participants studied word pairs varying in imageability or frequency: pairs were "pure" (high-high, low-low) or…

Energy-dense fast food products cost less: an observational study of the energy density and energy cost of Australian fast foods.

Science.gov (United States)

Wellard, Lyndal; Havill, Michelle; Hughes, Clare; Watson, Wendy L; Chapman, Kathy

2015-12-01

To examine the association between energy cost and energy density of fast food products. Twenty Sydney outlets of the five largest fast food chains were surveyed four times. Price and kilojoule data were collected for all limited-time-only menu items (n=54) and a sample of standard items (n=67). Energy cost ($/kilojoule) and energy density (kilojoules/gram) of menu items were calculated. There was a significant inverse relationship between menu item energy density and energy cost (pFast food chains could provide a wider range of affordable, lower-energy foods, use proportional pricing of larger serve sizes, or change defaults in meals to healthier options. More research is required to determine the most effective strategy to reduce the negative impact of fast food on the population's diet. Current pricing in the fast food environment may encourage unhealthier purchases. © 2015 Public Health Association of Australia.

The cost of proactive interference is constant across presentation conditions.

Science.gov (United States)

Endress, Ansgar D; Siddique, Aneela

2016-10-01

Proactive interference (PI) severely constrains how many items people can remember. For example, Endress and Potter (2014a) presented participants with sequences of everyday objects at 250ms/picture, followed by a yes/no recognition test. They manipulated PI by either using new images on every trial in the unique condition (thus minimizing PI among items), or by re-using images from a limited pool for all trials in the repeated condition (thus maximizing PI among items). In the low-PI unique condition, the probability of remembering an item was essentially independent of the number of memory items, showing no clear memory limitations; more traditional working memory-like memory limitations appeared only in the high-PI repeated condition. Here, we ask whether the effects of PI are modulated by the availability of long-term memory (LTM) and verbal resources. Participants viewed sequences of 21 images, followed by a yes/no recognition test. Items were presented either quickly (250ms/image) or sufficiently slowly (1500ms/image) to produce LTM representations, either with or without verbal suppression. Across conditions, participants performed better in the unique than in the repeated condition, and better for slow than for fast presentations. In contrast, verbal suppression impaired performance only with slow presentations. The relative cost of PI was remarkably constant across conditions: relative to the unique condition, performance in the repeated condition was about 15% lower in all conditions. The cost of PI thus seems to be a function of the relative strength or recency of target items and interfering items, but relatively insensitive to other experimental manipulations. Copyright © 2016 Elsevier B.V. All rights reserved.

A Bifactor Multidimensional Item Response Theory Model for Differential Item Functioning Analysis on Testlet-Based Items

Science.gov (United States)

Fukuhara, Hirotaka; Kamata, Akihito

2011-01-01

A differential item functioning (DIF) detection method for testlet-based data was proposed and evaluated in this study. The proposed DIF model is an extension of a bifactor multidimensional item response theory (MIRT) model for testlets. Unlike traditional item response theory (IRT) DIF models, the proposed model takes testlet effects into…

On-line item control at a high enriched nuclear fuel fabrication facility

International Nuclear Information System (INIS)

Lewis, T.W.; Lewis, H.M.

1984-01-01

The on-line item control system at Nuclear Fuel Services, Inc., is a near-real time method capable of tracking uniquely identified items from creation through disposition. The system provides for improved control, timeliness, accuracy and usability of company information and the necessary data required to support the regulatory program for the protection against diversion of Special Nuclear Materials. The system consists of software applications (approximately 150 programs) with man/machine interface controls which provide facilities for correct data entry and for the protection of data integrity. This system went into stand-alone operation in September, 1983 after a twenty month parallel test run with the previous keybatched (manual forms) item control system

48 CFR 31.205-26 - Material costs.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Material costs. 31.205-26... CONTRACTING REQUIREMENTS CONTRACT COST PRINCIPLES AND PROCEDURES Contracts With Commercial Organizations 31.205-26 Material costs. (a) Material costs include the costs of such items as raw materials, parts...

Reduction of LNG FOB cost

International Nuclear Information System (INIS)

Aoki, Ichizo; Kikkawa, Yoshitsugi

1997-01-01

To achieve a competitive LNG price for the consumers against other energy sources, reduction of LNG FOB (Free on Board) cost i.e. LNG cost at LNG ship flange, will be the key item. It is necessary to perform a many optimization studies (or value engineering) for each stage of the LNG project. These stages are: Feasibility study; Conceptual design - FEED (Front End Engineering and Design); EPC (Engineering, Procurement and Construction); Operation and maintenance. Since the LNG plant forms one part of the LNG chain, starting from gas production to LNG receiving, and requires several billion US dollar of investment, the consequences of a plant shut down on the LNG chain are clear, it is, therefore, important to get high availability which will also contribute the reduction of LNG FOB cost. (au) 25 refs

Lamb Production Costs: Analyses of Composition and Elasticities Analysis of Lamb Production Costs

Directory of Open Access Journals (Sweden)

C. Raineri

2015-08-01

Full Text Available Since lamb is a commodity, producers cannot control the price of the product they sell. Therefore, managing production costs is a necessity. We explored the study of elasticities as a tool for basing decision-making in sheep production, and aimed at investigating the composition and elasticities of lamb production costs, and their influence on the performance of the activity. A representative sheep production farm, designed in a panel meeting, was the base for calculation of lamb production cost. We then performed studies of: i costs composition, and ii cost elasticities for prices of inputs and for zootechnical indicators. Variable costs represented 64.15% of total cost, while 21.66% were represented by operational fixed costs, and 14.19% by the income of the factors. As for elasticities to input prices, the opportunity cost of land was the item to which production cost was more sensitive: a 1% increase in its price would cause a 0.2666% increase in lamb cost. Meanwhile, the impact of increasing any technical indicator was significantly higher than the impact of rising input prices. A 1% increase in weight at slaughter, for example, would reduce total cost in 0.91%. The greatest obstacle to economic viability of sheep production under the observed conditions is low technical efficiency. Increased production costs are more related to deficient zootechnical indexes than to high expenses.

Molten Salt: Concept Definition and Capital Cost Estimate

Energy Technology Data Exchange (ETDEWEB)

Stoddard, Larry [Black & Veatch, Kansas City, MO (United States); Andrew, Daniel [Black & Veatch, Kansas City, MO (United States); Adams, Shannon [Black & Veatch, Kansas City, MO (United States); Galluzzo, Geoff [Black & Veatch, Kansas City, MO (United States)

2016-06-30

The Department of Energy’s (DOE’s) Office of Renewable Power (ORP) has been tasked to provide effective program management and strategic direction for all of the DOE’s Energy Efficiency & Renewable Energy’s (EERE’s) renewable power programs. The ORP’s efforts to accomplish this mission are aligned with national energy policies, DOE strategic planning, EERE’s strategic planning, Congressional appropriation, and stakeholder advice. ORP is supported by three renewable energy offices, of which one is the Solar Energy Technology Office (SETO) whose SunShot Initiative has a mission to accelerate research, development and large scale deployment of solar technologies in the United States. SETO has a goal of reducing the cost of Concentrating Solar Power (CSP) by 75 percent of 2010 costs by 2020 to reach parity with base-load energy rates, and to reduce costs 30 percent further by 2030. The SunShot Initiative is promoting the implementation of high temperature CSP with thermal energy storage allowing generation during high demand hours. The SunShot Initiative has funded significant research and development work on component testing, with attention to high temperature molten salts, heliostats, receiver designs, and high efficiency high temperature supercritical CO₂ (sCO2) cycles. DOE retained Black & Veatch to support SETO’s SunShot Initiative for CSP solar power tower technology in the following areas: 1. Concept definition, including costs and schedule, of a flexible test facility to be used to test and prove components in part to support financing. 2. Concept definition, including costs and schedule, of an integrated high temperature molten salt (MS) facility with thermal energy storage and with a supercritical CO₂ cycle generating approximately 10MWe. 3. Concept definition, including costs and schedule, of an integrated high temperature falling particle facility with thermal energy storage and with a supercritical CO₂

Predicting Future High-Cost Schizophrenia Patients Using High-Dimensional Administrative Data

Directory of Open Access Journals (Sweden)

Yajuan Wang

2017-06-01

Full Text Available BackgroundThe burden of serious and persistent mental illness such as schizophrenia is substantial and requires health-care organizations to have adequate risk adjustment models to effectively allocate their resources to managing patients who are at the greatest risk. Currently available models underestimate health-care costs for those with mental or behavioral health conditions.ObjectivesThe study aimed to develop and evaluate predictive models for identification of future high-cost schizophrenia patients using advanced supervised machine learning methods.MethodsThis was a retrospective study using a payer administrative database. The study cohort consisted of 97,862 patients diagnosed with schizophrenia (ICD9 code 295.* from January 2009 to June 2014. Training (n = 34,510 and study evaluation (n = 30,077 cohorts were derived based on 12-month observation and prediction windows (PWs. The target was average total cost/patient/month in the PW. Three models (baseline, intermediate, final were developed to assess the value of different variable categories for cost prediction (demographics, coverage, cost, health-care utilization, antipsychotic medication usage, and clinical conditions. Scalable orthogonal regression, significant attribute selection in high dimensions method, and random forests regression were used to develop the models. The trained models were assessed in the evaluation cohort using the regression R2, patient classification accuracy (PCA, and cost accuracy (CA. The model performance was compared to the Centers for Medicare & Medicaid Services Hierarchical Condition Categories (CMS-HCC model.ResultsAt top 10% cost cutoff, the final model achieved 0.23 R2, 43% PCA, and 63% CA; in contrast, the CMS-HCC model achieved 0.09 R2, 27% PCA with 45% CA. The final model and the CMS-HCC model identified 33 and 22%, respectively, of total cost at the top 10% cost cutoff.ConclusionUsing advanced feature selection leveraging detailed

Disposal costs for SRP high-level wastes in borosilicate glass and crystalline ceramic waste forms

International Nuclear Information System (INIS)

Rozsa, R.B.; Campbell, J.H.

1982-01-01

Purpose of this document is to compare and contrast the overall burial costs of the glass and ceramic waste forms, including processing, storage, transportation, packaging, and emplacement in a repository. Amount of waste will require approximately 10,300 standard (24 in. i.d. x 9-5/6 ft length) canisters of waste glass, each containing about 3260 lb of waste at 28% waste loading. The ceramic waste form requires about one-third the above number of standard canisters. Approximately $2.5 billion is required to process and dispose of this waste, and the total cost is independent of waste form (glass or ceramic). The major cost items (about 80% of the total cost) for all cases are capital and operating expenses. The capital and 20-year operating costs for the processing facility are the same order of magnitude, and their sum ranges from about one-half of the total for the reference glass case to two-thirds of the total for the ceramic cases

The Effects of Goal Relevance and Perceptual Features on Emotional Items and Associative Memory.

Science.gov (United States)

Mao, Wei B; An, Shu; Yang, Xiao F

2017-01-01

Showing an emotional item in a neutral background scene often leads to enhanced memory for the emotional item and impaired associative memory for background details. Meanwhile, both top-down goal relevance and bottom-up perceptual features played important roles in memory binding. We conducted two experiments and aimed to further examine the effects of goal relevance and perceptual features on emotional items and associative memory. By manipulating goal relevance (asking participants to categorize only each item image as living or non-living or to categorize each whole composite picture consisted of item image and background scene as natural scene or manufactured scene) and perceptual features (controlling visual contrast and visual familiarity) in two experiments, we found that both high goal relevance and salient perceptual features (high salience of items vs. high familiarity of items) could promote emotional item memory, but they had different effects on associative memory for emotional items and neutral backgrounds. Specifically, high goal relevance and high perceptual-salience of items could jointly impair the associative memory for emotional items and neutral backgrounds, while the effect of item familiarity on associative memory for emotional items would be modulated by goal relevance. High familiarity of items could increase associative memory for negative items and neutral backgrounds only in the low goal relevance condition. These findings suggest the effect of emotion on associative memory is not only related to attentional capture elicited by emotion, but also can be affected by goal relevance and perceptual features of stimulus.

Item Response Theory analysis of Fagerström Test for Cigarette Dependence.

Science.gov (United States)

Svicher, Andrea; Cosci, Fiammetta; Giannini, Marco; Pistelli, Francesco; Fagerström, Karl

2018-02-01

The Fagerström Test for Cigarette Dependence (FTCD) and the Heaviness of Smoking Index (HSI) are the gold standard measures to assess cigarette dependence. However, FTCD reliability and factor structure have been questioned and HSI psychometric properties are in need of further investigations. The present study examined the psychometrics properties of the FTCD and the HSI via the Item Response Theory. The study was a secondary analysis of data collected in 862 Italian daily smokers. Confirmatory factor analysis was run to evaluate the dimensionality of FTCD. A Grade Response Model was applied to FTCD and HSI to verify the fit to the data. Both item and test functioning were analyzed and item statistics, Test Information Function, and scale reliabilities were calculated. Mokken Scale Analysis was applied to estimate homogeneity and Loevinger's coefficients were calculated. The FTCD showed unidimensionality and homogeneity for most of the items and for the total score. It also showed high sensitivity and good reliability from medium to high levels of cigarette dependence, although problems related to some items (i.e., items 3 and 5) were evident. HSI had good homogeneity, adequate item functioning, and high reliability from medium to high levels of cigarette dependence. Significant Differential Item Functioning was found for items 1, 4, 5 of the FTCD and for both items of HSI. HSI seems highly recommended in clinical settings addressed to heavy smokers while FTCD would be better used in smokers with a level of cigarette dependence ranging between low and high. Copyright © 2017 Elsevier Ltd. All rights reserved.

Cost effective nuclear commercial grade dedication

International Nuclear Information System (INIS)

Maletz, J.J.; Marston, M.J.

1991-01-01

This paper describes a new computerized database method to create/edit/view specification technical data sheets (mini-specifications) for procurement of spare parts for nuclear facility maintenance and to develop information that could support possible future facility life extension efforts. This method may reduce cost when compared with current manual methods. The use of standardized technical data sheets (mini-specifications) for items of the same category improves efficiency. This method can be used for a variety of tasks, including: Nuclear safety-related procurement; Non-safety related procurement; Commercial grade item procurement/dedication; Evaluation of replacement items. This program will assist the nuclear facility in upgrading its procurement activities consistent with the recent NUMARC Procurement Initiative. Proper utilization of the program will assist the user in assuring that the procured items are correct for the applications, provide data to assist in detecting fraudulent materials, minimize human error in withdrawing database information, improve data retrievability, improve traceability, and reduce long-term procurement costs

The Effects of Goal Relevance and Perceptual Features on Emotional Items and Associative Memory

Directory of Open Access Journals (Sweden)

Wei B. Mao

2017-07-01

Full Text Available Showing an emotional item in a neutral background scene often leads to enhanced memory for the emotional item and impaired associative memory for background details. Meanwhile, both top–down goal relevance and bottom–up perceptual features played important roles in memory binding. We conducted two experiments and aimed to further examine the effects of goal relevance and perceptual features on emotional items and associative memory. By manipulating goal relevance (asking participants to categorize only each item image as living or non-living or to categorize each whole composite picture consisted of item image and background scene as natural scene or manufactured scene and perceptual features (controlling visual contrast and visual familiarity in two experiments, we found that both high goal relevance and salient perceptual features (high salience of items vs. high familiarity of items could promote emotional item memory, but they had different effects on associative memory for emotional items and neutral backgrounds. Specifically, high goal relevance and high perceptual-salience of items could jointly impair the associative memory for emotional items and neutral backgrounds, while the effect of item familiarity on associative memory for emotional items would be modulated by goal relevance. High familiarity of items could increase associative memory for negative items and neutral backgrounds only in the low goal relevance condition. These findings suggest the effect of emotion on associative memory is not only related to attentional capture elicited by emotion, but also can be affected by goal relevance and perceptual features of stimulus.

Inventory Model for Deteriorating Items Involving Fuzzy with Shortages and Exponential Demand

Directory of Open Access Journals (Sweden)

Sharmila Vijai Stanly

2015-11-01

Full Text Available This paper considers the fuzzy inventory model for deteriorating items for power demand under fully backlogged conditions. We define various factors which are affecting the inventory cost by using the shortage costs. An intention of this paper is to study the inventory modelling through fuzzy environment. Inventory parameters, such as holding cost, shortage cost, purchasing cost and deterioration cost are assumed to be the trapezoidal fuzzy numbers. In addition, an efficient algorithm is developed to determine the optimal policy, and the computational effort and time are small for the proposed algorithm. It is simple to implement, and our approach is illustrated through some numerical examples to demonstrate the application and the performance of the proposed methodology.

Capital cost: high and low sulfur coal plants-1200 MWe. [High sulfur coal

Energy Technology Data Exchange (ETDEWEB)

1977-01-01

This Commercial Electric Power Cost Study for 1200 MWe (Nominal) high and low sulfur coal plants consists of three volumes. The high sulfur coal plant is described in Volumes I and II, while Volume III describes the low sulfur coal plant. The design basis and cost estimate for the 1232 MWe high sulfur coal plant is presented in Volume I, and the drawings, equipment list and site description are contained in Volume II. The reference design includes a lime flue gas desulfurization system. A regenerative sulfur dioxide removal system using magnesium oxide is also presented as an alternate in Section 7 Volume II. The design basis, drawings and summary cost estimate for a 1243 MWe low sulfur coal plant are presented in Volume III. This information was developed by redesigning the high sulfur coal plant for burning low sulfur sub-bituminous coal. These coal plants utilize a mechanical draft (wet) cooling tower system for condenser heat removal. Costs of alternate cooling systems are provided in Report No. 7 in this series of studies of costs of commercial electrical power plants.

Item response theory, computerized adaptive testing, and PROMIS: assessment of physical function.

Science.gov (United States)

Fries, James F; Witter, James; Rose, Matthias; Cella, David; Khanna, Dinesh; Morgan-DeWitt, Esi

2014-01-01

Patient-reported outcome (PRO) questionnaires record health information directly from research participants because observers may not accurately represent the patient perspective. Patient-reported Outcomes Measurement Information System (PROMIS) is a US National Institutes of Health cooperative group charged with bringing PRO to a new level of precision and standardization across diseases by item development and use of item response theory (IRT). With IRT methods, improved items are calibrated on an underlying concept to form an item bank for a "domain" such as physical function (PF). The most informative items can be combined to construct efficient "instruments" such as 10-item or 20-item PF static forms. Each item is calibrated on the basis of the probability that a given person will respond at a given level, and the ability of the item to discriminate people from one another. Tailored forms may cover any desired level of the domain being measured. Computerized adaptive testing (CAT) selects the best items to sharpen the estimate of a person's functional ability, based on prior responses to earlier questions. PROMIS item banks have been improved with experience from several thousand items, and are calibrated on over 21,000 respondents. In areas tested to date, PROMIS PF instruments are superior or equal to Health Assessment Questionnaire and Medical Outcome Study Short Form-36 Survey legacy instruments in clarity, translatability, patient importance, reliability, and sensitivity to change. Precise measures, such as PROMIS, efficiently incorporate patient self-report of health into research, potentially reducing research cost by lowering sample size requirements. The advent of routine IRT applications has the potential to transform PRO measurement.

Supercritical Carbon Dioxide Power Generation System Definition: Concept Definition and Capital Cost Estimate

Energy Technology Data Exchange (ETDEWEB)

Stoddard, Larry [Black & Veatch, Kansas City, MO (United States); Galluzzo, Geoff [Black & Veatch, Kansas City, MO (United States); Andrew, Daniel [Black & Veatch, Kansas City, MO (United States); Adams, Shannon [Black & Veatch, Kansas City, MO (United States)

2016-06-30

The Department of Energy’s (DOE’s) Office of Renewable Power (ORP) has been tasked to provide effective program management and strategic direction for all of the DOE’s Energy Efficiency & Renewable Energy’s (EERE’s) renewable power programs. The ORP’s efforts to accomplish this mission are aligned with national energy policies, DOE strategic planning, EERE’s strategic planning, Congressional appropriation, and stakeholder advice. ORP is supported by three renewable energy offices, of which one is the Solar Energy Technology Office (SETO) whose SunShot Initiative has a mission to accelerate research, development and large scale deployment of solar technologies in the United States. SETO has a goal of reducing the cost of Concentrating Solar Power (CSP) by 75 percent of 2010 costs by 2020 to reach parity with base-load energy rates, and 30 percent further reductions by 2030. The SunShot Initiative is promoting the implementation of high temperature CSP with thermal energy storage allowing generation during high demand hours. The SunShot Initiative has funded significant research and development work on component testing, with attention to high temperature molten salts, heliostats, receiver designs, and high efficiency high temperature supercritical CO₂ (sCO2) cycles. DOE retained Black & Veatch to support SETO’s SunShot Initiative for CSP solar power tower technology in the following areas: 1. Concept definition, including costs and schedule, of a flexible test facility to be used to test and prove components in part to support financing. 2. Concept definition, including costs and schedule, of an integrated high temperature molten salt (MS) facility with thermal energy storage and with a supercritical CO₂ cycle generating approximately 10MWe. 3. Concept definition, including costs and schedule, of an integrated high temperature falling particle facility with thermal energy storage and with a supercritical CO₂ cycle

An economic production model for deteriorating items and time dependent demand with rework and multiple production setups

Science.gov (United States)

Uthayakumar, R.; Tharani, S.

2017-12-01

Recently, much emphasis has given to study the control and maintenance of production inventories of the deteriorating items. Rework is one of the main issues in reverse logistic and green supply chain, since it can reduce production cost and the environmental problem. Many researchers have focused on developing rework model, but few of them have developed model for deteriorating items. Due to this fact, we take up productivity and rework with deterioration as the major concern in this paper. In this paper, a production-inventory model with deteriorative items in which one cycle has n production setups and one rework setup (n, 1) policy is considered for deteriorating items with stock-dependent demand in case 1 and exponential demand in case 2. An effective iterative solution procedure is developed to achieve optimal time, so that the total cost of the system is minimized. Numerical and sensitivity analyses are discussed to examine the outcome of the proposed solution procedure presented in this research.

78 FR 76067 - Defense Federal Acquisition Regulation Supplement: Item Unique Identifier Update (DFARS Case 2011...

Science.gov (United States)

2013-12-16

... emphasizes the importance of quantifying both costs and benefits, of reducing costs, of harmonizing rules...) Ensures item level traceability throughout lifecycle to strengthen supply chain integrity, enhance cyber security, and combat counterfeiting. 0 3. Section 211.274-2 is amended by-- 0 a. Revising the section...

A production inventory model with deteriorating items and shortages

Directory of Open Access Journals (Sweden)

Samanta G.P.

2004-01-01

Full Text Available A continuous production control inventory model for deteriorating items with shortages is developed. A number of structural properties of the inventory system are studied analytically. The formulae for the optimal average system cost, stock level, backlog level and production cycle time are derived when the deterioration rate is very small. Numerical examples are taken to illustrate the procedure of finding the optimal total inventory cost, stock level, backlog level and production cycle time. Sensitivity analysis is carried out to demonstrate the effects of changing parameter values on the optimal solution of the system.

Utility of the Health of the Nation Outcome Scales (HoNOS) in Predicting Mental Health Service Costs for Patients with Common Mental Health Problems: Historical Cohort Study.

Science.gov (United States)

Twomey, Conal; Prina, A Matthew; Baldwin, David S; Das-Munshi, Jayati; Kingdon, David; Koeser, Leonardo; Prince, Martin J; Stewart, Robert; Tulloch, Alex D; Cieza, Alarcos

2016-01-01

Few countries have made much progress in implementing transparent and efficient systems for the allocation of mental health care resources. In England there are ongoing efforts by the National Health Service (NHS) to develop mental health 'payment by results' (PbR). The system depends on the ability of patient 'clusters' derived from the Health of the Nation Outcome Scales (HoNOS) to predict costs. We therefore investigated the associations of individual HoNOS items and the Total HoNOS score at baseline with mental health service costs at one year follow-up. An historical cohort study using secondary care patient records from the UK financial year 2012-2013. Included were 1,343 patients with 'common mental health problems', represented by ICD-10 disorders between F32-48. Costs were based on patient contacts with community-based and hospital-based mental health services. The costs outcome was transformed into 'high costs' vs 'regular costs' in main analyses. After adjustment for covariates, 11 HoNOS items were not associated with costs. The exception was 'self-injury' with an odds ratio of 1.41 (95% CI 1.10-2.99). Population attributable fractions (PAFs) for the contribution of HoNOS items to high costs ranged from 0.6% (physical illness) to 22.4% (self-injury). After adjustment, the Total HoNOS score was not associated with costs (OR 1.03, 95% CI 0.99-1.07). However, the PAF (33.3%) demonstrated that it might account for a modest proportion of the incidence of high costs. Our findings provide limited support for the utility of the self-injury item and Total HoNOS score in predicting costs. However, the absence of associations for the remaining HoNOS items indicates that current PbR clusters have minimal ability to predict costs, so potentially contributing to a misallocation of NHS resources across England. The findings may inform the development of mental health payment systems internationally, especially since the vast majority of countries have not progressed

Utility of the Health of the Nation Outcome Scales (HoNOS in Predicting Mental Health Service Costs for Patients with Common Mental Health Problems: Historical Cohort Study.

Directory of Open Access Journals (Sweden)

Conal Twomey

Full Text Available Few countries have made much progress in implementing transparent and efficient systems for the allocation of mental health care resources. In England there are ongoing efforts by the National Health Service (NHS to develop mental health 'payment by results' (PbR. The system depends on the ability of patient 'clusters' derived from the Health of the Nation Outcome Scales (HoNOS to predict costs. We therefore investigated the associations of individual HoNOS items and the Total HoNOS score at baseline with mental health service costs at one year follow-up.An historical cohort study using secondary care patient records from the UK financial year 2012-2013. Included were 1,343 patients with 'common mental health problems', represented by ICD-10 disorders between F32-48. Costs were based on patient contacts with community-based and hospital-based mental health services. The costs outcome was transformed into 'high costs' vs 'regular costs' in main analyses.After adjustment for covariates, 11 HoNOS items were not associated with costs. The exception was 'self-injury' with an odds ratio of 1.41 (95% CI 1.10-2.99. Population attributable fractions (PAFs for the contribution of HoNOS items to high costs ranged from 0.6% (physical illness to 22.4% (self-injury. After adjustment, the Total HoNOS score was not associated with costs (OR 1.03, 95% CI 0.99-1.07. However, the PAF (33.3% demonstrated that it might account for a modest proportion of the incidence of high costs.Our findings provide limited support for the utility of the self-injury item and Total HoNOS score in predicting costs. However, the absence of associations for the remaining HoNOS items indicates that current PbR clusters have minimal ability to predict costs, so potentially contributing to a misallocation of NHS resources across England. The findings may inform the development of mental health payment systems internationally, especially since the vast majority of countries have not

48 CFR 12.214 - Cost Accounting Standards.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Cost Accounting Standards. 12.214 Section 12.214 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION... Items 12.214 Cost Accounting Standards. Cost Accounting Standards (CAS) do not apply to contracts and...

Application of the Commercial Grade Item (CGI) Dedication Process for Procurement of Nuclear Safety Related Items at Nuclear Power Plant Krsko (NEK)

International Nuclear Information System (INIS)

Heruc, Z.; Pozar, J.

1998-01-01

CGI procurement is a process whereby parts are brought without imposing Appendix B Quality Assurance requirements on the supplier, and than dedicated for use in safety-related applications. The dedication process involves 1) based upon required safety function, an engineering evaluation to identify critical characteristic of the item and specification of acceptance criteria; and 2) quality control activities to ensure the item(s) supplied meets the acceptance criteria specified. CGI Dedication supports the supply of certified components/parts for the plant operation in an environment where the number of nuclear qualified suppliers diminishes. It requires a more active role of the plant personnel, therefore presenting an additional burden on human resources, but at the same time increases the technical KNOW-HOW and improves the confidence of test and inspection data presented in the certificates. Very often it is also cost beneficial. This paper is a continuation to last year presentation of the introduction of this method into NEK's procurement process and presents the current approach and some practical examples. (author)

Evaluation of item candidates for a diabetic retinopathy quality of life item bank.

Science.gov (United States)

Fenwick, Eva K; Pesudovs, Konrad; Khadka, Jyoti; Rees, Gwyn; Wong, Tien Y; Lamoureux, Ecosse L

2013-09-01

We are developing an item bank assessing the impact of diabetic retinopathy (DR) on quality of life (QoL) using a rigorous multi-staged process combining qualitative and quantitative methods. We describe here the first two qualitative phases: content development and item evaluation. After a comprehensive literature review, items were generated from four sources: (1) 34 previously validated patient-reported outcome measures; (2) five published qualitative articles; (3) eight focus groups and 18 semi-structured interviews with 57 DR patients; and (4) seven semi-structured interviews with diabetes or ophthalmic experts. Items were then evaluated during 3 stages, namely binning (grouping) and winnowing (reduction) based on key criteria and panel consensus; development of item stems and response options; and pre-testing of items via cognitive interviews with patients. The content development phase yielded 1,165 unique items across 7 QoL domains. After 3 sessions of binning and winnowing, items were reduced to a minimally representative set (n = 312) across 9 domains of QoL: visual symptoms; ocular surface symptoms; activity limitation; mobility; emotional; health concerns; social; convenience; and economic. After 8 cognitive interviews, 42 items were amended resulting in a final set of 314 items. We have employed a systematic approach to develop items for a DR-specific QoL item bank. The psychometric properties of the nine QoL subscales will be assessed using Rasch analysis. The resulting validated item bank will allow clinicians and researchers to better understand the QoL impact of DR and DR therapies from the patient's perspective.

The role of attention in item-item binding in visual working memory.

Science.gov (United States)

Peterson, Dwight J; Naveh-Benjamin, Moshe

2017-09-01

An important yet unresolved question regarding visual working memory (VWM) relates to whether or not binding processes within VWM require additional attentional resources compared with processing solely the individual components comprising these bindings. Previous findings indicate that binding of surface features (e.g., colored shapes) within VWM is not demanding of resources beyond what is required for single features. However, it is possible that other types of binding, such as the binding of complex, distinct items (e.g., faces and scenes), in VWM may require additional resources. In 3 experiments, we examined VWM item-item binding performance under no load, articulatory suppression, and backward counting using a modified change detection task. Binding performance declined to a greater extent than single-item performance under higher compared with lower levels of concurrent load. The findings from each of these experiments indicate that processing item-item bindings within VWM requires a greater amount of attentional resources compared with single items. These findings also highlight an important distinction between the role of attention in item-item binding within VWM and previous studies of long-term memory (LTM) where declines in single-item and binding test performance are similar under divided attention. The current findings provide novel evidence that the specific type of binding is an important determining factor regarding whether or not VWM binding processes require attention. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Mathematical modeling of a multi-product EMQ model with an enhanced end items issuing policy and failures in rework.

Science.gov (United States)

Chiu, Yuan-Shyi Peter; Sung, Peng-Cheng; Chiu, Singa Wang; Chou, Chung-Li

2015-01-01

This study uses mathematical modeling to examine a multi-product economic manufacturing quantity (EMQ) model with an enhanced end items issuing policy and rework failures. We assume that a multi-product EMQ model randomly generates nonconforming items. All of the defective are reworked, but a certain portion fails and becomes scraps. When rework process ends and the entire lot of each product is quality assured, a cost reduction n + 1 end items issuing policy is used to transport finished items of each product. As a result, a closed-form optimal production cycle time is obtained. A numerical example demonstrates the practical usage of our result and confirms a significant savings in stock holding and overall production costs as compared to that of a prior work (Chiu et al. in J Sci Ind Res India, 72:435-440 2013) in the literature.

Cost-effectiveness studies as part of an ALARA program

International Nuclear Information System (INIS)

Baum, J.W.

1986-01-01

Recent studies of cost effectiveness of engineering modifications for dose reduction at nuclear power plants conducted at BNL will be considered in this report. Since each of these items has the potential for a 50% to 60% reduction in collective dose, it appears there is large potential for dose reduction from engineering type modifications. The question that must be answered for each plant is ''which modifications or improvements are required for optimization (ALARA). The purpose of this paper is to illustrate that quantified optimization need not be costly and can often be highly beneficial

Cross-National Prevalence of Traditional Bullying, Traditional Victimization, Cyberbullying and Cyber-Victimization: Comparing Single-Item and Multiple-Item Approaches of Measurement

Science.gov (United States)

Yanagida, Takuya; Gradinger, Petra; Strohmeier, Dagmar; Solomontos-Kountouri, Olga; Trip, Simona; Bora, Carmen

2016-01-01

Many large-scale cross-national studies rely on a single-item measurement when comparing prevalence rates of traditional bullying, traditional victimization, cyberbullying, and cyber-victimization between countries. However, the reliability and validity of single-item measurement approaches are highly problematic and might be biased. Data from…

Guideline for the seismic technical evaluation of replacement items for nuclear power plants

International Nuclear Information System (INIS)

Harris, S.P.; Cushing, R.W.; Johnson, H.W.; Abeles, J.M.

1993-02-01

Seismic qualification for equipment originally installed in nuclear power plants was typically performed by the original equipment suppliers or manufactures (OES/OEM). Many of the OES/OEM no longer maintain quality assurance programs with adequate controls for supplying nuclear equipment. Utilities themselves must provide reasonable assurance in the continued seismic adequacy of such replacement items. This guideline provides practical, cost-effective techniques which can be used to provide reasonable assurance that replacement items will meet seismic performance requirements necessary to maintain the seismic design basis of commercial nuclear power plants. It also provides a method for determining when a seismic technical evaluation of replacement items (STERI) is required as part of the procurement process for spare and replacement items. Guidance on supplier program requirements necessary to maintain continued seismic adequacy and on documentation of maintaining required seismic adequacy is also included

78 FR 31399 - Recoupment of Nonrecurring Costs (NCs) on Sales of U.S. Items

Science.gov (United States)

2013-05-24

... updates policy, responsibilities, and procedures for calculating and assessing NC recoupment charges on... Control Act, as amended'') for calculating and assessing NC recoupment charges on sales of items developed... adversely affect in a material way the economy; a section of the economy; productivity; competition; jobs...

Evaluating an Automated Number Series Item Generator Using Linear Logistic Test Models

Directory of Open Access Journals (Sweden)

Bao Sheng Loe

2018-04-01

Full Text Available This study investigates the item properties of a newly developed Automatic Number Series Item Generator (ANSIG. The foundation of the ANSIG is based on five hypothesised cognitive operators. Thirteen item models were developed using the numGen R package and eleven were evaluated in this study. The 16-item ICAR (International Cognitive Ability Resource1 short form ability test was used to evaluate construct validity. The Rasch Model and two Linear Logistic Test Model(s (LLTM were employed to estimate and predict the item parameters. Results indicate that a single factor determines the performance on tests composed of items generated by the ANSIG. Under the LLTM approach, all the cognitive operators were significant predictors of item difficulty. Moderate to high correlations were evident between the number series items and the ICAR test scores, with high correlation found for the ICAR Letter-Numeric-Series type items, suggesting adequate nomothetic span. Extended cognitive research is, nevertheless, essential for the automatic generation of an item pool with predictable psychometric properties.

Optimal pricing and marketing planning for deteriorating items.

Science.gov (United States)

Moosavi Tabatabaei, Seyed Reza; Sadjadi, Seyed Jafar; Makui, Ahmad

2017-01-01

Optimal pricing and marketing planning plays an essential role in production decisions on deteriorating items. This paper presents a mathematical model for a three-level supply chain, which includes one producer, one distributor and one retailer. The proposed study considers the production of a deteriorating item where demand is influenced by price, marketing expenditure, quality of product and after-sales service expenditures. The proposed model is formulated as a geometric programming with 5 degrees of difficulty and the problem is solved using the recent advances in optimization techniques. The study is supported by several numerical examples and sensitivity analysis is performed to analyze the effects of the changes in different parameters on the optimal solution. The preliminary results indicate that with the change in parameters influencing on demand, inventory holding, inventory deteriorating and set-up costs change and also significantly affect total revenue.

Re-evaluating a vision-related quality of life questionnaire with item response theory (IRT and differential item functioning (DIF analyses

Directory of Open Access Journals (Sweden)

Knol Dirk L

2011-09-01

Full Text Available Abstract Background For the Low Vision Quality Of Life questionnaire (LVQOL it is unknown whether the psychometric properties are satisfactory when an item response theory (IRT perspective is considered. This study evaluates some essential psychometric properties of the LVQOL questionnaire in an IRT model, and investigates differential item functioning (DIF. Methods Cross-sectional data were used from an observational study among visually-impaired patients (n = 296. Calibration was performed for every dimension of the LVQOL in the graded response model. Item goodness-of-fit was assessed with the S-X2-test. DIF was assessed on relevant background variables (i.e. age, gender, visual acuity, eye condition, rehabilitation type and administration type with likelihood-ratio tests for DIF. The magnitude of DIF was interpreted by assessing the largest difference in expected scores between subgroups. Measurement precision was assessed by presenting test information curves; reliability with the index of subject separation. Results All items of the LVQOL dimensions fitted the model. There was significant DIF on several items. For two items the maximum difference between expected scores exceeded one point, and DIF was found on multiple relevant background variables. Item 1 'Vision in general' from the "Adjustment" dimension and item 24 'Using tools' from the "Reading and fine work" dimension were removed. Test information was highest for the "Reading and fine work" dimension. Indices for subject separation ranged from 0.83 to 0.94. Conclusions The items of the LVQOL showed satisfactory item fit to the graded response model; however, two items were removed because of DIF. The adapted LVQOL with 21 items is DIF-free and therefore seems highly appropriate for use in heterogeneous populations of visually impaired patients.

An Effective Multimedia Item Shell Design for Individualized Education: The Crome Project

Directory of Open Access Journals (Sweden)

Irene Cheng

2008-01-01

Full Text Available There are several advantages to creating multimedia item types and applying computer-based adaptive testing in education. First is the capability to motivate learning by making the learners feel more engaged and in an interactive environment. Second is a better concept representation, which is not possible in conventional multiple-choice tests. Third is the advantage of individualized curriculum design, rather than a curriculum designed for an average student. Fourth is a good choice of the next question, associated with the appropriate difficulty level based on a student's response to the current question. However, many issues need to be addressed when achieving these goals, including: (a the large number of item types required to represent the current multiple-choice questions in multimedia formats, (b the criterion used to determine the difficulty level of a multimedia question item, and (c the methodology applied to the question selection process for individual students. In this paper, we propose a multimedia item shell design that not only reduces the number of item types required, but also computes difficulty level of an item automatically. The concept of question seed is introduced to make content creation more cost-effective. The proposed item shell framework facilitates efficient communication between user responses at the client, and the scoring agents integrated with a student ability assessor at the server. We also describe approaches for automatically estimating difficulty level of questions, and discuss preliminary evaluation of multimedia item types by students.

The unit cost factors and calculation methods for decommissioning - Cost estimation of nuclear research facilities

International Nuclear Information System (INIS)

Kwan-Seong Jeong; Dong-Gyu Lee; Chong-Hun Jung; Kune-Woo Lee

2007-01-01

Available in abstract form only. Full text of publication follows: The uncertainties of decommissioning costs increase high due to several conditions. Decommissioning cost estimation depends on the complexity of nuclear installations, its site-specific physical and radiological inventories. Therefore, the decommissioning costs of nuclear research facilities must be estimated in accordance with the detailed sub-tasks and resources by the tasks of decommissioning activities. By selecting the classified activities and resources, costs are calculated by the items and then the total costs of all decommissioning activities are reshuffled to match with its usage and objectives. And the decommissioning cost of nuclear research facilities is calculated by applying a unit cost factor method on which classification of decommissioning works fitted with the features and specifications of decommissioning objects and establishment of composition factors are based. Decommissioning costs of nuclear research facilities are composed of labor cost, equipment and materials cost. Of these three categorical costs, the calculation of labor costs are very important because decommissioning activities mainly depend on labor force. Labor costs in decommissioning activities are calculated on the basis of working time consumed in decommissioning objects and works. The working times are figured out of unit cost factors and work difficulty factors. Finally, labor costs are figured out by using these factors as parameters of calculation. The accuracy of decommissioning cost estimation results is much higher compared to the real decommissioning works. (authors)

An EPQ model with imperfect items using interval grey numbers

Directory of Open Access Journals (Sweden)

Erdal Aydemir

2015-01-01

Full Text Available The classic economic production quantity (EPQ model has been widely used to determine the optimal production quantity. However, the analysis for finding an EPQ model has many weaknesses which lead many researchers and practitioners to make extensions in several aspects on the original EPQ model. The basic assumption of EPQ model is that 100% of manufactured products are non-defective that is not valid for many production processes generally. The purpose of this paper is to develop an EPQ model with grey demand rate and cost values with maximum backorder level allowed with the good quality items in units under an imperfect production process. The imperfect items are considered to be low quality items which are sold to a particular purchaser at a lower price and, the others are reworked and scrapped. A mathematical model is developed and then an industrial example is presented on the wooden chipboard production process for illustration of the proposed model.

High-value, cost-conscious health care: concepts for clinicians to evaluate the benefits, harms, and costs of medical interventions.

Science.gov (United States)

Owens, Douglas K; Qaseem, Amir; Chou, Roger; Shekelle, Paul

2011-02-01

Health care costs in the United States are increasing unsustainably, and further efforts to control costs are inevitable and essential. Efforts to control expenditures should focus on the value, in addition to the costs, of health care interventions. Whether an intervention provides high value depends on assessing whether its health benefits justify its costs. High-cost interventions may provide good value because they are highly beneficial; conversely, low-cost interventions may have little or no value if they provide little benefit. Thus, the challenge becomes determining how to slow the rate of increase in costs while preserving high-value, high-quality care. A first step is to decrease or eliminate care that provides no benefit and may even be harmful. A second step is to provide medical interventions that provide good value: medical benefits that are commensurate with their costs. This article discusses 3 key concepts for understanding how to assess the value of health care interventions. First, assessing the benefits, harms, and costs of an intervention is essential to understand whether it provides good value. Second, assessing the cost of an intervention should include not only the cost of the intervention itself but also any downstream costs that occur because the intervention was performed. Third, the incremental cost-effectiveness ratio estimates the additional cost required to obtain additional health benefits and provides a key measure of the value of a health care intervention.

A Fast Recommender System for Cold User Using Categorized Items

Directory of Open Access Journals (Sweden)

Hamid Jazayeriy

2018-01-01

Full Text Available In recent years, recommender systems (RS provide a considerable progress to users. RSs reduce the cost of a user’s time in order to reach to desired results faster. The main issue of RSs is the presence of cold users which are less active and their preferences are more difficult to detect. The aim of this study is to provide a new way to improve recall and precision in recommender systems for cold users. According to the available categories of items, prioritization of the proposed items is improved and then presented to the cold user. The obtained results show that in addition to increased speed of processing, recall and precision have an acceptable improvement.

Constructing the 32-item Fitness-to-Drive Screening Measure.

Science.gov (United States)

Medhizadah, Shabnam; Classen, Sherrilene; Johnson, Andrew M

2018-04-01

The Fitness-to-Drive Screening Measure © (FTDS) enables proxies to identify at-risk older drivers via 54 driving-related items, but may be too lengthy for widespread uptake. We reduced the number of items in the FTDS and validated the shorter measure, using 200 caregiver responses. Exploratory factor analysis and classical test theory techniques were used to determine the most interpretable factor model and the minimum number of items to be used for predicting fitness to drive. The extent to which the shorter FTDS predicted the results of the 54-item FTDS was evaluated through correlational analysis. A three-factor model best represented the empirical data. Classical test theory techniques lead to the development of the 32-item FTDS. The 32-item FTDS was highly correlated ( r = .99, p = .05) with the FTDS. The 32-item FTDS may provide raters with a faster and more efficient way to identify at-risk older drivers.

76 FR 68376 - Recoupment of Nonrecurring Costs (NCs) on Sales of U.S. Items

Science.gov (United States)

2011-11-04

... amended, and section 9701 of title 31, United States Code (U.S.C.), for calculating and assessing NC... section of the economy; productivity; competition; jobs; the environment; public health or safety; or....) for calculating and assessing NC recoupment charges on sales of items developed for or by the...

Evaluating the healthiness of chain-restaurant menu items using crowdsourcing: a new method.

Science.gov (United States)

Lesser, Lenard I; Wu, Leslie; Matthiessen, Timothy B; Luft, Harold S

2017-01-01

To develop a technology-based method for evaluating the nutritional quality of chain-restaurant menus to increase the efficiency and lower the cost of large-scale data analysis of food items. Using a Modified Nutrient Profiling Index (MNPI), we assessed chain-restaurant items from the MenuStat database with a process involving three steps: (i) testing 'extreme' scores; (ii) crowdsourcing to analyse fruit, nut and vegetable (FNV) amounts; and (iii) analysis of the ambiguous items by a registered dietitian. In applying the approach to assess 22 422 foods, only 3566 could not be scored automatically based on MenuStat data and required further evaluation to determine healthiness. Items for which there was low agreement between trusted crowd workers, or where the FNV amount was estimated to be >40 %, were sent to a registered dietitian. Crowdsourcing was able to evaluate 3199, leaving only 367 to be reviewed by the registered dietitian. Overall, 7 % of items were categorized as healthy. The healthiest category was soups (26 % healthy), while desserts were the least healthy (2 % healthy). An algorithm incorporating crowdsourcing and a dietitian can quickly and efficiently analyse restaurant menus, allowing public health researchers to analyse the healthiness of menu items.

Differential item functioning magnitude and impact measures from item response theory models.

Science.gov (United States)

Kleinman, Marjorie; Teresi, Jeanne A

2016-01-01

Measures of magnitude and impact of differential item functioning (DIF) at the item and scale level, respectively are presented and reviewed in this paper. Most measures are based on item response theory models. Magnitude refers to item level effect sizes, whereas impact refers to differences between groups at the scale score level. Reviewed are magnitude measures based on group differences in the expected item scores and impact measures based on differences in the expected scale scores. The similarities among these indices are demonstrated. Various software packages are described that provide magnitude and impact measures, and new software presented that computes all of the available statistics conveniently in one program with explanations of their relationships to one another.

Building an Evaluation Scale using Item Response Theory.

Science.gov (United States)

Lalor, John P; Wu, Hao; Yu, Hong

2016-11-01

Evaluation of NLP methods requires testing against a previously vetted gold-standard test set and reporting standard metrics (accuracy/precision/recall/F1). The current assumption is that all items in a given test set are equal with regards to difficulty and discriminating power. We propose Item Response Theory (IRT) from psychometrics as an alternative means for gold-standard test-set generation and NLP system evaluation. IRT is able to describe characteristics of individual items - their difficulty and discriminating power - and can account for these characteristics in its estimation of human intelligence or ability for an NLP task. In this paper, we demonstrate IRT by generating a gold-standard test set for Recognizing Textual Entailment. By collecting a large number of human responses and fitting our IRT model, we show that our IRT model compares NLP systems with the performance in a human population and is able to provide more insight into system performance than standard evaluation metrics. We show that a high accuracy score does not always imply a high IRT score, which depends on the item characteristics and the response pattern.

Profit Analysis Model of Smart Item Implementation in Integrated Supply Chain Process

Science.gov (United States)

Tritularsih, Yustina; Rinanto, Andhy; Prasetyo, Hoedi; Nur Rosyidi, Cucuk

2018-03-01

Nowadays all links of the entire supply chain need to integrate their different infrastructures and they have better control of them to drive better profits. This integration should offer the ability for companies in order to have an overall and transparent insight to its supply chain activities. An intelligent supply chain which is mainly supported by Smart Items technology can satisfy the need of those integration. By means of Smart Items, a company can benefit some advantages. Those are cost reduction and value creation. However, currently there is no comprehensive Smart Item infrastructure exists yet so it is difficult to calculate the true benefit information. This paper attempts to recommend a model for estimating the benefits of implementing Smart Items in a company which has an integrated supply chain process. The integrated supply chain means that three echelons (supplier, shipper and retailer) of supply chain are belonged to a company. The proposed model was used to determine the shrinkage value and RFID tag price which can give the maximum benefit of Smart Items implementation. A numerical example is also provided to give a better comprehension on model calculation.

Cost, affordability and cost-effectiveness of strategies to control tuberculosis in countries with high HIV prevalence

Directory of Open Access Journals (Sweden)

Williams Brian G

2005-12-01

Full Text Available Abstract Background The HIV epidemic has caused a dramatic increase in tuberculosis (TB in East and southern Africa. Several strategies have the potential to reduce the burden of TB in high HIV prevalence settings, and cost and cost-effectiveness analyses can help to prioritize them when budget constraints exist. However, published cost and cost-effectiveness studies are limited. Methods Our objective was to compare the cost, affordability and cost-effectiveness of seven strategies for reducing the burden of TB in countries with high HIV prevalence. A compartmental difference equation model of TB and HIV and recent cost data were used to assess the costs (year 2003 US$ prices and effects (TB cases averted, deaths averted, DALYs gained of these strategies in Kenya during the period 2004–2023. Results The three lowest cost and most cost-effective strategies were improving TB cure rates, improving TB case detection rates, and improving both together. The incremental cost of combined improvements to case detection and cure was below US$15 million per year (7.5% of year 2000 government health expenditure; the mean cost per DALY gained of these three strategies ranged from US$18 to US$34. Antiretroviral therapy (ART had the highest incremental costs, which by 2007 could be as large as total government health expenditures in year 2000. ART could also gain more DALYs than the other strategies, at a cost per DALY gained of around US$260 to US$530. Both the costs and effects of treatment for latent tuberculosis infection (TLTI for HIV+ individuals were low; the cost per DALY gained ranged from about US$85 to US$370. Averting one HIV infection for less than US$250 would be as cost-effective as improving TB case detection and cure rates to WHO target levels. Conclusion To reduce the burden of TB in high HIV prevalence settings, the immediate goal should be to increase TB case detection rates and, to the extent possible, improve TB cure rates, preferably

ITEM LEVEL DIAGNOSTICS AND MODEL - DATA FIT IN ITEM ...

African Journals Online (AJOL)

Global Journal

Item response theory (IRT) is a framework for modeling and analyzing item response ... data. Though, there is an argument that the evaluation of fit in IRT modeling has been ... National Council on Measurement in Education ... model data fit should be based on three types of ... prediction should be assessed through the.

WHAT DRIVES HIGH COST OF FINANCE IN MOLDOVA?

Directory of Open Access Journals (Sweden)

Alexandru Stratan

2012-03-01

Full Text Available Why there are high costs to finance in Republic of Moldova? Is it a problem for business environment?These are the questions discussed in this paper. Following the well know Growth Diagnostics approach byHausmann, Rodrik and Velasco, authors assess the barriers and impediments to access to finance in Republic ofMoldova. Guided by international and national statistics we found evidence of poor intermediation, poorinstitutions, high level of inflation, and high collateral as major causes of high cost of financial resources inRepublic of Moldova. At the end of the study authors give policy recommendations identifying other related fieldsto be addressed.

Cost optimisation studies of high power accelerators

Energy Technology Data Exchange (ETDEWEB)

McAdams, R.; Nightingale, M.P.S.; Godden, D. [AEA Technology, Oxon (United Kingdom)] [and others

1995-10-01

Cost optimisation studies are carried out for an accelerator based neutron source consisting of a series of linear accelerators. The characteristics of the lowest cost design for a given beam current and energy machine such as power and length are found to depend on the lifetime envisaged for it. For a fixed neutron yield it is preferable to have a low current, high energy machine. The benefits of superconducting technology are also investigated. A Separated Orbit Cyclotron (SOC) has the potential to reduce capital and operating costs and intial estimates for the transverse and longitudinal current limits of such machines are made.

Optimal pricing and marketing planning for deteriorating items.

Directory of Open Access Journals (Sweden)

Seyed Reza Moosavi Tabatabaei

Full Text Available Optimal pricing and marketing planning plays an essential role in production decisions on deteriorating items. This paper presents a mathematical model for a three-level supply chain, which includes one producer, one distributor and one retailer. The proposed study considers the production of a deteriorating item where demand is influenced by price, marketing expenditure, quality of product and after-sales service expenditures. The proposed model is formulated as a geometric programming with 5 degrees of difficulty and the problem is solved using the recent advances in optimization techniques. The study is supported by several numerical examples and sensitivity analysis is performed to analyze the effects of the changes in different parameters on the optimal solution. The preliminary results indicate that with the change in parameters influencing on demand, inventory holding, inventory deteriorating and set-up costs change and also significantly affect total revenue.

Optimal pricing and marketing planning for deteriorating items

Science.gov (United States)

Moosavi Tabatabaei, Seyed Reza; Sadjadi, Seyed Jafar; Makui, Ahmad

2017-01-01

Optimal pricing and marketing planning plays an essential role in production decisions on deteriorating items. This paper presents a mathematical model for a three-level supply chain, which includes one producer, one distributor and one retailer. The proposed study considers the production of a deteriorating item where demand is influenced by price, marketing expenditure, quality of product and after-sales service expenditures. The proposed model is formulated as a geometric programming with 5 degrees of difficulty and the problem is solved using the recent advances in optimization techniques. The study is supported by several numerical examples and sensitivity analysis is performed to analyze the effects of the changes in different parameters on the optimal solution. The preliminary results indicate that with the change in parameters influencing on demand, inventory holding, inventory deteriorating and set-up costs change and also significantly affect total revenue. PMID:28306750

Costs of topical treatment of pressure ulcer patients

Directory of Open Access Journals (Sweden)

Cynthia Carolina Duarte Andrade

2016-04-01

Full Text Available Abstract OBJECTIVE To evaluate the costs of a topical treatment of pressure ulcer (PU patients in a hospital unit for treatment of chronic patients in 2014. METHOD This is an activity-based costing study. This method encompasses the identification, measurement and pricing of physical and human resources consumed for dressings. RESULTS Procedure costs varied between BRL 16.41 and BRL 260.18. For PUs of the same category, of near areas and with the same type of barrier/adjuvant, the cost varied between 3.5% and 614.6%. For most dressings, the cost increased proportionally to the increase of the area and to the development of PU category. The primary barrier accounted for a high percentage of costs among all items required to the application of dressings (human and material resources. Dressings applied in sacral PUs had longer application times. CONCLUSION This study allowed us to understand the costs involved in the treatment of PUs, and it may support decision-makers and other cost-effectiveness studies.

A foraging cost of migration for a partially migratory cyprinid fish

DEFF Research Database (Denmark)

Chapman, Ben B; Eriksen, Anders; Baktoft, Henrik

2013-01-01

Rutilus rutilus, which migrates from shallow lakes to streams during winter. By sampling fish from stream and lake habitats in the autumn and spring and measuring their stomach fullness and diet composition, we tested if migrating roach pay a cost of reduced foraging when migrating. Resident fish had...... fuller stomachs containing more high quality prey items than migrant fish. Hence, we document a feeding cost to migration in roach, which adds additional support for the validity of the p/g model of migration in freshwater systems....

CECP, Decommissioning Costs for PWR and BWR

International Nuclear Information System (INIS)

Bierschbach, M.C.

1997-01-01

1 - Description of program or function: The Cost Estimating Computer Program CECP, designed for use on an IBM personal computer or equivalent, was developed for estimating the cost of decommissioning boiling water reactor (BWR) and light-water reactor (PWR) power stations to the point of license termination. 2 - Method of solution: Cost estimates include component, piping, and equipment removal costs; packaging costs; decontamination costs; transportation costs; burial volume and costs; and manpower staffing costs. Using equipment and consumables costs and inventory data supplied by the user, CECP calculates unit cost factors and then combines these factors with transportation and burial cost algorithms to produce a complete report of decommissioning costs. In addition to costs, CECP also calculates person-hours, crew-hours, and exposure person-hours associated with decommissioning. 3 - Restrictions on the complexity of the problem: The program is designed for a specific waste charge structure. The waste cost data structure cannot handle intermediate waste handlers or changes in the charge rate structures. The decommissioning of a reactor can be divided into 5 periods. 200 different items for special equipment costs are possible. The maximum amount for each special equipment item is 99,999,999$. You can support data for 10 buildings, 100 components each; ESTS1071/01: There are 65 components for 28 systems available to specify the contaminated systems costs (BWR). ESTS1071/02: There are 75 components for 25 systems available to specify the contaminated systems costs (PWR)

Development of a questionnaire to assess patient satisfaction with allergen-specific immunotherapy in adults: item generation, item reduction, and preliminary validation

Directory of Open Access Journals (Sweden)

Justícia JL

2011-05-01

Full Text Available Jose Luis Justícia1, Eva Baró2, Victoria Cardona3, Pedro Guardia4, Pedro Ojeda5, José Maria Olaguíbel6, José Maria Vega7, Carmen Vidal81Medical Department, Stallergenes Ibérica, Barcelona, Spain; 2Health Outcomes Research Department, 3D Health Research, Barcelona, Spain; 3Hospital Vall d'Hebron, Barcelona, Spain; 4Hospital Virgen Macarena, Sevilla, Spain; 5Clínica de Asma y Alergia Dres. Ojeda, Madrid, Spain; 6Complejo Hospitalario de Navarra, Pamplona, Spain; 7Hospital Regional Universitario Carlos Haya Málaga, Spain; 8Complejo Hospitalario Universitario de Santiago, Santiago de Compostela, SpainBackground: Allergen-specific immunotherapy (SIT is a treatment capable of modifying the natural course of allergy, so ensuring good adherence to SIT is fundamental. Up until now there has not existed an instrument specifically developed to measure patient satisfaction with SIT, although its assessment could help us to comprehend better and improve treatment adherence and effectiveness. The aim of this study was to develop an instrument to measure adult patient satisfaction with SIT.Methods: Items were generated from a literature review, focus groups with allergic adult patients undergoing SIT, and a meeting with experts. Potential items were administered to allergic patients undergoing SIT in an observational, cross-sectional, multicenter study. Item reduction was based on quantitative and qualitative criteria. A preliminary assessment of feasibility, reliability, and validity of the retained items was performed.Results: An initial pool of 70 items was administered to 257 patients undergoing SIT. Fifty-four items were eliminated resulting in a provisional instrument with 16 items. Factor analysis yielded four factors that were identified as perceived efficacy, activities and environment, cost-benefit balance, and overall satisfaction, explaining 74.8% of variance. Ceiling and floor effects were negligible for overall score. Overall score was

Sources of interference in item and associative recognition memory.

Science.gov (United States)

Osth, Adam F; Dennis, Simon

2015-04-01

A powerful theoretical framework for exploring recognition memory is the global matching framework, in which a cue's memory strength reflects the similarity of the retrieval cues being matched against the contents of memory simultaneously. Contributions at retrieval can be categorized as matches and mismatches to the item and context cues, including the self match (match on item and context), item noise (match on context, mismatch on item), context noise (match on item, mismatch on context), and background noise (mismatch on item and context). We present a model that directly parameterizes the matches and mismatches to the item and context cues, which enables estimation of the magnitude of each interference contribution (item noise, context noise, and background noise). The model was fit within a hierarchical Bayesian framework to 10 recognition memory datasets that use manipulations of strength, list length, list strength, word frequency, study-test delay, and stimulus class in item and associative recognition. Estimates of the model parameters revealed at most a small contribution of item noise that varies by stimulus class, with virtually no item noise for single words and scenes. Despite the unpopularity of background noise in recognition memory models, background noise estimates dominated at retrieval across nearly all stimulus classes with the exception of high frequency words, which exhibited equivalent levels of context noise and background noise. These parameter estimates suggest that the majority of interference in recognition memory stems from experiences acquired before the learning episode. (c) 2015 APA, all rights reserved).

Future trends of light-water reactor fuel-cycle costs

International Nuclear Information System (INIS)

Tamiya, S.; Otomo, T.; Meguro, T.

1977-01-01

In past cost estimates, the main fuel-cycle components were mining and milling, uranium enrichment and fuel fabrication, and the reprocessing charge deemed to be recovered by plutonium credit. Since the oil crisis, all costs of fuel-cycle components have increased as well as construction costs of power stations. Recent analysis shows that costs in the back-end of the fuel cycle are much higher than those anticipated several years ago, although their contribution to the nuclear electricity generating cost would be small. This situation has now changed but there are still many uncertainties, i.e. regulatory requirements for reprocessing plants concerning safety, safeguards, environmental protection and high-level waste management. Thus it is more difficult to estimate overall investments and, therefore, the costs of the back-end of the fuel-cycle sector. This paper reviews the future trend of nuclear fuel-cycle costs of LWRs, based on recent analysis; and those factors which affect fuel-cycle costs are discussed. To reduce the uncertainties of the cost estimates as soon as possible, international discussion is necessary on items such as the treatment and disposal of high-level radioactive wastes, siting reprocessing plants, physical protection of plutonium, and the effects of plutonium on the environment. (author)

Evolution of a Test Item

Science.gov (United States)

Spaan, Mary

2007-01-01

This article follows the development of test items (see "Language Assessment Quarterly", Volume 3 Issue 1, pp. 71-79 for the article "Test and Item Specifications Development"), beginning with a review of test and item specifications, then proceeding to writing and editing of items, pretesting and analysis, and finally selection of an item for a…

Medicaid care management: description of high-cost addictions treatment clients.

Science.gov (United States)

Neighbors, Charles J; Sun, Yi; Yerneni, Rajeev; Tesiny, Ed; Burke, Constance; Bardsley, Leland; McDonald, Rebecca; Morgenstern, Jon

2013-09-01

High utilizers of alcohol and other drug treatment (AODTx) services are a priority for healthcare cost control. We examine characteristics of Medicaid-funded AODTx clients, comparing three groups: individuals cost clients in the top decile of AODTx expenditures (HC; n=5,718); and 1760 enrollees in a chronic care management (CM) program for HC clients implemented in 22 counties in New York State. Medicaid and state AODTx registry databases were combined to draw demographic, clinical, social needs and treatment history data. HC clients accounted for 49% of AODTx costs funded by Medicaid. As expected, HC clients had significant social welfare needs, comorbid medical and psychiatric conditions, and use of inpatient services. The CM program was successful in enrolling some high-needs, high-cost clients but faced barriers to reaching the most costly and disengaged individuals. Copyright © 2013 Elsevier Inc. All rights reserved.

EOQ Model for Delayed Deteriorating Items with Shortages and Trade Credit Policy

Directory of Open Access Journals (Sweden)

R Sundararajan

2015-08-01

Full Text Available This paper deals with a deterministic inventory model for deteriorating items under the condition of permissible delay in payments with constant demand rate is a function of time which differs from before and after deterioration for a single item. Shortages are allowed and completely backlogged which is a function of time. Under these assumptions, this paper develops a retailer's model for obtaining an optimal cycle length and ordering quantity in deteriorating items of an inventory model. Thus, our objective is retailer's cost minimization problem to nd an optimal replenishment policy under various parameters. The convexity of the objective function is derived and the numerical examples are provided to support the proposed model. Sensitivity analysis of the optimal solution with respect to major parameters of the model is included and the implications are discussed.

Benefits of flexible prioritization in working memory can arise without costs.

Science.gov (United States)

Myers, Nicholas E; Chekroud, Sammi R; Stokes, Mark G; Nobre, Anna C

2018-03-01

Most recent models conceptualize working memory (WM) as a continuous resource, divided up according to task demands. When an increasing number of items need to be remembered, each item receives a smaller chunk of the memory resource. These models predict that the allocation of attention to high-priority WM items during the retention interval should be a zero-sum game: improvements in remembering cued items come at the expense of uncued items because resources are dynamically transferred from uncued to cued representations. The current study provides empirical data challenging this model. Four precision retrocueing WM experiments assessed cued and uncued items on every trial. This permitted a test for trade-off of the memory resource. We found no evidence for trade-offs in memory across trials. Moreover, robust improvements in WM performance for cued items came at little or no cost to uncued items that were probed afterward, thereby increasing the net capacity of WM relative to neutral cueing conditions. An alternative mechanism of prioritization proposes that cued items are transferred into a privileged state within a response-gating bottleneck, in which an item uniquely controls upcoming behavior. We found evidence consistent with this alternative. When an uncued item was probed first, report of its orientation was biased away from the cued orientation to be subsequently reported. We interpret this bias as competition for behavioral control in the output-driving bottleneck. Other items in WM did not bias each other, making this result difficult to explain with a shared resource model. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

An Innovative Heuristic in Multi-Item Replenishment Problem for One Warehouse and N Retailers

Directory of Open Access Journals (Sweden)

Yugowati Praharsi

2014-01-01

Full Text Available Joint replenishment problem (JRP is a type of inventory model which aims to minimize the total inventory cost consisting of major ordering cost, minor ordering cost and inventory holding cost. Different from previous papers, this study considers one warehouse, multi items and N retailers. An innovative heuristic approach is developed to solve the problem. In this paper, we consider a multi echelon inventory system and seek to find a balance between the order cost and the inventory holding costs at each installation. The computational results show that the innovative heuristic provides a near exact optimal solution, but is more efficient in terms of the computational time and the iteration number.

Method using a density field for locating related items for data mining

Science.gov (United States)

Wylie, Brian N.

2002-01-01

A method for locating related items in a geometric space transforms relationships among items to geometric locations. The method locates items in the geometric space so that the distance between items corresponds to the degree of relatedness. The method facilitates communication of the structure of the relationships among the items. The method makes use of numeric values as a measure of similarity between each pairing of items. The items are given initial coordinates in the space. An energy is then determined for each item from the item's distance and similarity to other items, and from the density of items assigned coordinates near the item. The distance and similarity component can act to draw items with high similarities close together, while the density component can act to force all items apart. If a terminal condition is not yet reached, then new coordinates can be determined for one or more items, and the energy determination repeated. The iteration can terminate, for example, when the total energy reaches a threshold, when each item's energy is below a threshold, after a certain amount of time or iterations.

How do high cost-sharing policies for physician care affect total care costs among people with chronic disease?

Science.gov (United States)

Xin, Haichang; Harman, Jeffrey S; Yang, Zhou

2014-01-01

This study examines whether high cost-sharing in physician care is associated with a differential impact on total care costs by health status. Total care includes physician care, emergency room (ER) visits and inpatient care. Since high cost-sharing policies can reduce needed care as well as unneeded care use, it raises the concern whether these policies are a good strategy for controlling costs among chronically ill patients. This study used the 2007 Medical Expenditure Panel Survey data with a cross-sectional study design. Difference in difference (DID), instrumental variable technique, two-part model, and bootstrap technique were employed to analyze cost data. Chronically ill individuals' probability of reducing any overall care costs was significantly less than healthier individuals (beta = 2.18, p = 0.04), while the integrated DID estimator from split results indicated that going from low cost-sharing to high cost-sharing significantly reduced costs by $12,853.23 more for sick people than for healthy people (95% CI: -$17,582.86, -$8,123.60). This greater cost reduction in total care among sick people likely resulted from greater cost reduction in physician care, and may have come at the expense of jeopardizing health outcomes by depriving patients of needed care. Thus, these policies would be inappropriate in the short run, and unlikely in the long run to control health plans costs among chronically ill individuals. A generous benefit design with low cost-sharing policies in physician care or primary care is recommended for both health plans and chronically ill individuals, to save costs and protect these enrollees' health status.

A proposal for a new Brazilian six-item version of the Edinburgh Postnatal Depression Scale

Directory of Open Access Journals (Sweden)

Maicon Rodrigues Albuquerque

Full Text Available Abstract Introduction: Factor analysis of the Edinburgh Postnatal Depression Scale (EPDS could result in a shorter and easier to handle screening tool. Therefore, the aim of this study was to check and compare the metrics of two different 6-item EPDS subscales. Methods: We administered the EPDS to a total of 3,891 women who had given birth between 1 and 3 months previously. We conducted confirmatory and exploratory factor analyses and plotted receiver-operating characteristics (ROC curves to, respectively, determine construct validity, scale items' fit to the data, and ideal cutoff scores for the short versions. Results: A previously defined 6-item scale did not exhibit construct validity for our sample. Nevertheless, we used exploratory factor analysis to derive a new 6-item scale with very good construct validity. The area under the ROC curve of the new 6-item scale was 0.986 and the ideal cutoff score was ≥ 6. Conclusions: The new 6-item scale has adequate psychometric properties and similar ROC curve values to the10-item version and offers a means of reducing the cost and time taken to administer the instrument.

Low-cost high-quality crystalline germanium based flexible devices

KAUST Repository

Nassar, Joanna M.

2014-06-16

High performance flexible electronics promise innovative future technology for various interactive applications for the pursuit of low-cost, light-weight, and multi-functional devices. Thus, here we show a complementary metal oxide semiconductor (CMOS) compatible fabrication of flexible metal-oxide-semiconductor capacitors (MOSCAPs) with high-κ/metal gate stack, using a physical vapor deposition (PVD) cost-effective technique to obtain a high-quality Ge channel. We report outstanding bending radius ~1.25 mm and semi-transparency of 30%.

Low-cost high-quality crystalline germanium based flexible devices

KAUST Repository

Nassar, Joanna M.; Hussain, Aftab M.; Rojas, Jhonathan Prieto; Hussain, Muhammad Mustafa

2014-01-01

High performance flexible electronics promise innovative future technology for various interactive applications for the pursuit of low-cost, light-weight, and multi-functional devices. Thus, here we show a complementary metal oxide semiconductor (CMOS) compatible fabrication of flexible metal-oxide-semiconductor capacitors (MOSCAPs) with high-κ/metal gate stack, using a physical vapor deposition (PVD) cost-effective technique to obtain a high-quality Ge channel. We report outstanding bending radius ~1.25 mm and semi-transparency of 30%.

Cost/benefit of high technology in diagnostic radiology

Energy Technology Data Exchange (ETDEWEB)

Goethlin, J.H.

1987-08-01

High technology is frequently blamed as a main cause for the last decade's disproportionate rise in health expenditure. Total costs for all large diagnostic and therapeutic appliances are typically less than 1% of annual expenditure on health care. CT, DSA, MRI, interventional radiology, ESWL, US, mammography, computers in radiology and PACS may save 10-80% of total cost for diagnosis and treatment of disease. Expenditure on high technology is in general vastly overestimated. Because of its medical utility, a slower deployment cannot be desirable. (orig.)

Cost/benefit of high technology in diagnostic radiology

International Nuclear Information System (INIS)

Goethlin, J.H.

1987-01-01

High technology is frequently blamed as a main cause for the last decade's disproportionate rise in health expenditure. Total costs for all large diagnostic and therapeutic appliances are typically less than 1% of annual expenditure on health care. CT, DSA, MRI, interventional radiology, ESWL, US, mammography, computers in radiology and PACS may save 10-80% of total cost for diagnosis and treatment of disease. Expenditure on high technology is in general vastly overestimated. Because of its medical utility, a slower deployment cannot be desirable. (orig.)

Instructional Topics in Educational Measurement (ITEMS) Module: Using Automated Processes to Generate Test Items

Science.gov (United States)

Gierl, Mark J.; Lai, Hollis

2013-01-01

Changes to the design and development of our educational assessments are resulting in the unprecedented demand for a large and continuous supply of content-specific test items. One way to address this growing demand is with automatic item generation (AIG). AIG is the process of using item models to generate test items with the aid of computer…

Teoria da Resposta ao Item Teoria de la respuesta al item Item response theory

Directory of Open Access Journals (Sweden)

Eutalia Aparecida Candido de Araujo

2009-12-01

Full Text Available A preocupação com medidas de traços psicológicos é antiga, sendo que muitos estudos e propostas de métodos foram desenvolvidos no sentido de alcançar este objetivo. Entre os trabalhos propostos, destaca-se a Teoria da Resposta ao Item (TRI que, a princípio, veio completar limitações da Teoria Clássica de Medidas, empregada em larga escala até hoje na medida de traços psicológicos. O ponto principal da TRI é que ela leva em consideração o item particularmente, sem relevar os escores totais; portanto, as conclusões não dependem apenas do teste ou questionário, mas de cada item que o compõe. Este artigo propõe-se a apresentar esta Teoria que revolucionou a teoria de medidas.La preocupación con las medidas de los rasgos psicológicos es antigua y muchos estudios y propuestas de métodos fueron desarrollados para lograr este objetivo. Entre estas propuestas de trabajo se incluye la Teoría de la Respuesta al Ítem (TRI que, en principio, vino a completar las limitaciones de la Teoría Clásica de los Tests, ampliamente utilizada hasta hoy en la medida de los rasgos psicológicos. El punto principal de la TRI es que se tiene en cuenta el punto concreto, sin relevar las puntuaciones totales; por lo tanto, los resultados no sólo dependen de la prueba o cuestionario, sino que de cada ítem que lo compone. En este artículo se propone presentar la Teoría que revolucionó la teoría de medidas.The concern with measures of psychological traits is old and many studies and proposals of methods were developed to achieve this goal. Among these proposed methods highlights the Item Response Theory (IRT that, in principle, came to complete limitations of the Classical Test Theory, which is widely used until nowadays in the measurement of psychological traits. The main point of IRT is that it takes into account the item in particular, not relieving the total scores; therefore, the findings do not only depend on the test or questionnaire

Coordinating vendor-buyer decisions for imperfect quality items considering trade credit and fully backlogged shortages

Science.gov (United States)

Khanna, Aditi; Gautam, Prerna; Jaggi, Chandra K.

2016-03-01

Supply chain management has become a critical issue for modern business environments. In today's world of cooperative decision-making, individual decisions in order to reduce inventory costs may not lead to an overall optimal solution. Coordination is necessary among participants of supply chain to achieve better performance. There are legitimate and important efforts from the vendor to enhance the relation with buyer; one such effort is offering trade credit which has been a driver of growth and development of business between them. The cost of financing is a core consideration in effective financial management, in general and in context of business. Also, due to imperfect production a vendor may produce defective items which results in shortages. Motivated with these aspects, an integrated vendor-buyer inventory model is developed for imperfect quality items with allowable shortages; in which the vendor offers credit period to the buyer for payment. The objective is to minimize the total joint annual costs incurred by the vendor and the buyer by using integrated decision making approach. The expected total annual integrated cost is derived and a solution procedure is provided to find the optimal solution. Numerical analysis shows that the integrated model gives an impressive cost reduction, in comparison to independent decision policies by the vendor and the buyer.

Technical considerations for designing low-cost, long-wave infrared objectives

Science.gov (United States)

Desroches, Gerard; Dalzell, Kristy; Robitaille, Blaise

2014-06-01

With the growth of uncooled infrared imaging in the consumer market, the balance between cost implications and performance criteria in the objective lens must be examined carefully. The increased availability of consumer-grade, long-wave infrared cameras is related to a decrease in military usage but it is also due to the decreasing costs of the cameras themselves. This has also driven up demand for low-cost, long-wave objectives that can resolve smaller pixels while maintaining high performance. Smaller pixels are traditionally associated with high cost objectives because of higher resolution requirements but, with careful consideration of all the requirements and proper selection of materials, costs can be moderated. This paper examines the cost/performance trade-off implications associated with optical and mechanical requirements of long-wave infrared objectives. Optical performance, f-number, field of view, distortion, focus range and thermal range all affect the cost of the objective. Because raw lens material cost is often the most expensive item in the construction, selection of the material as well as the shape of the lens while maintaining acceptable performance and cost targets were explored. As a result of these considerations, a low-cost, lightweight, well-performing objective was successfully designed, manufactured and tested.

A Low-Cost, Precision Hydrometer for Classroom Use.

Science.gov (United States)

Murphy, Michael D.

1983-01-01

Describes a low cost hydrometer which can be assembled by students using stock laboratory items with a total retail cost of 17 cents. Includes list of required materials (with supplies) and experimental results on the instrument's accuracy. (JM)

Low Cost Lithography Tool for High Brightness LED Manufacturing

Energy Technology Data Exchange (ETDEWEB)

Andrew Hawryluk; Emily True

2012-06-30

The objective of this activity was to address the need for improved manufacturing tools for LEDs. Improvements include lower cost (both capital equipment cost reductions and cost-ofownership reductions), better automation and better yields. To meet the DOE objective of $1- 2/kilolumen, it will be necessary to develop these highly automated manufacturing tools. Lithography is used extensively in the fabrication of high-brightness LEDs, but the tools used to date are not scalable to high-volume manufacturing. This activity addressed the LED lithography process. During R&D and low volume manufacturing, most LED companies use contact-printers. However, several industries have shown that these printers are incompatible with high volume manufacturing and the LED industry needs to evolve to projection steppers. The need for projection lithography tools for LED manufacturing is identified in the Solid State Lighting Manufacturing Roadmap Draft, June 2009. The Roadmap states that Projection tools are needed by 2011. This work will modify a stepper, originally designed for semiconductor manufacturing, for use in LED manufacturing. This work addresses improvements to yield, material handling, automation and throughput for LED manufacturing while reducing the capital equipment cost.

Acceptance issues for large items and difficult waste

International Nuclear Information System (INIS)

Palmer, J.; Lock, Peter

2002-01-01

Peter Lock described some particular cases which had given rise to difficult acceptance issues at NIREX, ranging from large size items to the impacts of chemicals used during decontamination on the mobility of radionuclides in a disposal facility: The UK strategy for intermediate level and certain low level radioactive waste disposal is based on production of cementitious waste-forms packaged in a standard range of containers as follows: 500 litre Drum - the normal container for most operational ILW (0.8 m diameter x 1.2 m high); 3 m"3 Box - a larger container for solid wastes (1.72 m x 1.72 m plan x 1.2 m high); 3 m"3 Drum - a larger container for in-drum mixing and immobilisation of sludge waste-forms (1.72 m diameter x 1.2 m high); 4 m Box - for large items of waste, especially from decommissioning (4.0 m x 2.4 m plan x 2.2 m high); 2 m LLW Box - for higher-density wastes (2.0 m x 2.4 m plan x 2.2 m high). In addition the majority of LLW is packaged by supercompaction followed by grouting in modified ISO freight containers (6 m x 2.5 m x 2.5 m). Some wastes do not fit easily into this strategy. These wastes include: very large items, (too big for the 4 m box) which, if dealt with whole, pose transport and disposal problems. These items are discussed further in Section 2; waste whose characteristics make packaging difficult. Such wastes are described in more detail in Section 3

High-Efficient Low-Cost Photovoltaics Recent Developments

CERN Document Server

Petrova-Koch, Vesselinka; Goetzberger, Adolf

2009-01-01

A bird's-eye view of the development and problems of recent photovoltaic cells and systems and prospects for Si feedstock is presented. High-efficient low-cost PV modules, making use of novel efficient solar cells (based on c-Si or III-V materials), and low cost solar concentrators are in the focus of this book. Recent developments of organic photovoltaics, which is expected to overcome its difficulties and to enter the market soon, are also included.

Improvement of the cost-benefit analysis algorithm for high-rise construction projects

Directory of Open Access Journals (Sweden)

Gafurov Andrey

2018-01-01

Full Text Available The specific nature of high-rise investment projects entailing long-term construction, high risks, etc. implies a need to improve the standard algorithm of cost-benefit analysis. An improved algorithm is described in the article. For development of the improved algorithm of cost-benefit analysis for high-rise construction projects, the following methods were used: weighted average cost of capital, dynamic cost-benefit analysis of investment projects, risk mapping, scenario analysis, sensitivity analysis of critical ratios, etc. This comprehensive approach helped to adapt the original algorithm to feasibility objectives in high-rise construction. The authors put together the algorithm of cost-benefit analysis for high-rise construction projects on the basis of risk mapping and sensitivity analysis of critical ratios. The suggested project risk management algorithms greatly expand the standard algorithm of cost-benefit analysis in investment projects, namely: the “Project analysis scenario” flowchart, improving quality and reliability of forecasting reports in investment projects; the main stages of cash flow adjustment based on risk mapping for better cost-benefit project analysis provided the broad range of risks in high-rise construction; analysis of dynamic cost-benefit values considering project sensitivity to crucial variables, improving flexibility in implementation of high-rise projects.

Improvement of the cost-benefit analysis algorithm for high-rise construction projects

Science.gov (United States)

Gafurov, Andrey; Skotarenko, Oksana; Plotnikov, Vladimir

2018-03-01

The specific nature of high-rise investment projects entailing long-term construction, high risks, etc. implies a need to improve the standard algorithm of cost-benefit analysis. An improved algorithm is described in the article. For development of the improved algorithm of cost-benefit analysis for high-rise construction projects, the following methods were used: weighted average cost of capital, dynamic cost-benefit analysis of investment projects, risk mapping, scenario analysis, sensitivity analysis of critical ratios, etc. This comprehensive approach helped to adapt the original algorithm to feasibility objectives in high-rise construction. The authors put together the algorithm of cost-benefit analysis for high-rise construction projects on the basis of risk mapping and sensitivity analysis of critical ratios. The suggested project risk management algorithms greatly expand the standard algorithm of cost-benefit analysis in investment projects, namely: the "Project analysis scenario" flowchart, improving quality and reliability of forecasting reports in investment projects; the main stages of cash flow adjustment based on risk mapping for better cost-benefit project analysis provided the broad range of risks in high-rise construction; analysis of dynamic cost-benefit values considering project sensitivity to crucial variables, improving flexibility in implementation of high-rise projects.

Low-Cost Superconducting Wire for Wind Generators: High Performance, Low Cost Superconducting Wires and Coils for High Power Wind Generators

Energy Technology Data Exchange (ETDEWEB)

None

2012-01-01

REACT Project: The University of Houston will develop a low-cost, high-current superconducting wire that could be used in high-power wind generators. Superconducting wire currently transports 600 times more electric current than a similarly sized copper wire, but is significantly more expensive. The University of Houston’s innovation is based on engineering nanoscale defects in the superconducting film. This could quadruple the current relative to today’s superconducting wires, supporting the same amount of current using 25% of the material. This would make wind generators lighter, more powerful and more efficient. The design could result in a several-fold reduction in wire costs and enable their commercial viability of high-power wind generators for use in offshore applications.

Repository Planning, Design, and Engineering: Part II-Equipment and Costing.

Science.gov (United States)

Baird, Phillip M; Gunter, Elaine W

2016-08-01

Part II of this article discusses and provides guidance on the equipment and systems necessary to operate a repository. The various types of storage equipment and monitoring and support systems are presented in detail. While the material focuses on the large repository, the requirements for a small-scale startup are also presented. Cost estimates and a cost model for establishing a repository are presented. The cost model presents an expected range of acquisition costs for the large capital items in developing a repository. A range of 5,000-7,000 ft(2) constructed has been assumed, with 50 frozen storage units, to reflect a successful operation with growth potential. No design or engineering costs, permit or regulatory costs, or smaller items such as the computers, software, furniture, phones, and barcode readers required for operations have been included.

Using business intelligence to manage supply costs.

Science.gov (United States)

Bunata, Ernest

2013-08-01

Business intelligence tools can help materials managers and managers in the operating room and procedural areas track purchasing costs more precisely and determine the root causes of cost increases. Data can be shared with physicians to increase their awareness of the cost of physician preference items. Proper use of business intelligence goes beyond price benchmarking to manage price performance over time.

Computerized Adaptive Test (CAT) Applications and Item Response Theory Models for Polytomous Items

Science.gov (United States)

Aybek, Eren Can; Demirtasli, R. Nukhet

2017-01-01

This article aims to provide a theoretical framework for computerized adaptive tests (CAT) and item response theory models for polytomous items. Besides that, it aims to introduce the simulation and live CAT software to the related researchers. Computerized adaptive test algorithm, assumptions of item response theory models, nominal response…

Language-related differential item functioning between English and German PROMIS Depression items is negligible.

Science.gov (United States)

Fischer, H Felix; Wahl, Inka; Nolte, Sandra; Liegl, Gregor; Brähler, Elmar; Löwe, Bernd; Rose, Matthias

2017-12-01

To investigate differential item functioning (DIF) of PROMIS Depression items between US and German samples we compared data from the US PROMIS calibration sample (n = 780), a German general population survey (n = 2,500) and a German clinical sample (n = 621). DIF was assessed in an ordinal logistic regression framework, with 0.02 as criterion for R 2 -change and 0.096 for Raju's non-compensatory DIF. Item parameters were initially fixed to the PROMIS Depression metric; we used plausible values to account for uncertainty in depression estimates. Only four items showed DIF. Accounting for DIF led to negligible effects for the full item bank as well as a post hoc simulated computer-adaptive test (German general population sample was considerably lower compared to the US reference value of 50. Overall, we found little evidence for language DIF between US and German samples, which could be addressed by either replacing the DIF items by items not showing DIF or by scoring the short form in German samples with the corrected item parameters reported. Copyright © 2016 John Wiley & Sons, Ltd.

Addressing Uncertainties in Cost Estimates for Decommissioning Nuclear Facilities

International Nuclear Information System (INIS)

Benjamin, Serge; Descures, Sylvain; Du Pasquier, Louis; Francois, Patrice; Buonarotti, Stefano; Mariotti, Giovanni; Tarakonov, Jurij; Daniska, Vladimir; Bergh, Niklas; Carroll, Simon; AaSTRoeM, Annika; Cato, Anna; De La Gardie, Fredrik; Haenggi, Hannes; Rodriguez, Jose; Laird, Alastair; Ridpath, Andy; La Guardia, Thomas; O'Sullivan, Patrick; ); Weber, Inge; )

2017-01-01

The cost estimation process of decommissioning nuclear facilities has continued to evolve in recent years, with a general trend towards demonstrating greater levels of detail in the estimate and more explicit consideration of uncertainties, the latter of which may have an impact on decommissioning project costs. The 2012 report on the International Structure for Decommissioning Costing (ISDC) of Nuclear Installations, a joint recommendation by the Nuclear Energy Agency (NEA), the International Atomic Energy Agency (IAEA) and the European Commission, proposes a standardised structure of cost items for decommissioning projects that can be used either directly for the production of cost estimates or for mapping of cost items for benchmarking purposes. The ISDC, however, provides only limited guidance on the treatment of uncertainty when preparing cost estimates. Addressing Uncertainties in Cost Estimates for Decommissioning Nuclear Facilities, prepared jointly by the NEA and IAEA, is intended to complement the ISDC, assisting cost estimators and reviewers in systematically addressing uncertainties in decommissioning cost estimates. Based on experiences gained in participating countries and projects, the report describes how uncertainty and risks can be analysed and incorporated in decommissioning cost estimates, while presenting the outcomes in a transparent manner

36 CFR 1254.28 - What items are not allowed in research rooms?

Science.gov (United States)

2010-07-01

... ADMINISTRATION PUBLIC AVAILABILITY AND USE USING RECORDS AND DONATED HISTORICAL MATERIALS Research Room Rules... papers. (b) You may store personal items at no cost in lockers or other storage facilities in the NARA... replacement fee for lost locker keys. (f) Knives and other sharp objects such as box cutters, razors, or wire...

Selecting Items for Criterion-Referenced Tests.

Science.gov (United States)

Mellenbergh, Gideon J.; van der Linden, Wim J.

1982-01-01

Three item selection methods for criterion-referenced tests are examined: the classical theory of item difficulty and item-test correlation; the latent trait theory of item characteristic curves; and a decision-theoretic approach for optimal item selection. Item contribution to the standardized expected utility of mastery testing is discussed. (CM)

Geriatric Anxiety Scale: item response theory analysis, differential item functioning, and creation of a ten-item short form (GAS-10).

Science.gov (United States)

Mueller, Anne E; Segal, Daniel L; Gavett, Brandon; Marty, Meghan A; Yochim, Brian; June, Andrea; Coolidge, Frederick L

2015-07-01

The Geriatric Anxiety Scale (GAS; Segal et al. (Segal, D. L., June, A., Payne, M., Coolidge, F. L. and Yochim, B. (2010). Journal of Anxiety Disorders, 24, 709-714. doi:10.1016/j.janxdis.2010.05.002) is a self-report measure of anxiety that was designed to address unique issues associated with anxiety assessment in older adults. This study is the first to use item response theory (IRT) to examine the psychometric properties of a measure of anxiety in older adults. A large sample of older adults (n = 581; mean age = 72.32 years, SD = 7.64 years, range = 60 to 96 years; 64% women; 88% European American) completed the GAS. IRT properties were examined. The presence of differential item functioning (DIF) or measurement bias by age and sex was assessed, and a ten-item short form of the GAS (called the GAS-10) was created. All GAS items had discrimination parameters of 1.07 or greater. Items from the somatic subscale tended to have lower discrimination parameters than items on the cognitive or affective subscales. Two items were flagged for DIF, but the impact of the DIF was negligible. Women scored significantly higher than men on the GAS and its subscales. Participants in the young-old group (60 to 79 years old) scored significantly higher on the cognitive subscale than participants in the old-old group (80 years old and older). Results from the IRT analyses indicated that the GAS and GAS-10 have strong psychometric properties among older adults. We conclude by discussing implications and future research directions.

Asymptotic Standard Errors for Item Response Theory True Score Equating of Polytomous Items

Science.gov (United States)

Cher Wong, Cheow

2015-01-01

Building on previous works by Lord and Ogasawara for dichotomous items, this article proposes an approach to derive the asymptotic standard errors of item response theory true score equating involving polytomous items, for equivalent and nonequivalent groups of examinees. This analytical approach could be used in place of empirical methods like…

Work ability as prognostic risk marker of disability pension: single-item work ability score versus multi-item work ability index.

Science.gov (United States)

Roelen, Corné A M; van Rhenen, Willem; Groothoff, Johan W; van der Klink, Jac J L; Twisk, Jos W R; Heymans, Martijn W

2014-07-01

Work ability predicts future disability pension (DP). A single-item work ability score (WAS) is emerging as a measure for work ability. This study compared single-item WAS with the multi-item work ability index (WAI) in its ability to identify workers at risk of DP. This prospective cohort study comprised 11 537 male construction workers, who completed the WAI at baseline and reported DP after a mean 2.3 years of follow-up. WAS and WAI were calibrated for DP risk predictions with the Hosmer-Lemeshow (H-L) test and their ability to discriminate between high- and low-risk construction workers was investigated with the area under the receiver operating characteristic curve (AUC). At follow-up, 336 (3%) construction workers reported DP. Both WAS [odds ratio (OR) 0.72, 95% confidence interval (95% CI) 0.66-0.78] and WAI (OR 0.57, 95% CI 0.52-0.63) scores were associated with DP at follow-up. The WAS showed miscalibration (H-L model χ (�)=10.60; df=3; P=0.01) and poorly discriminated between high- and low-risk construction workers (AUC 0.67, 95% CI 0.64-0.70). In contrast, calibration (H-L model χ �=8.20; df=8; P=0.41) and discrimination (AUC 0.78, 95% CI 0.75-0.80) were both adequate for the WAI. Although associated with the risk of future DP, the single-item WAS poorly identified male construction workers at risk of DP. We recommend using the multi-item WAI to screen for risk of DP in occupational health practice.

MIMIC Methods for Assessing Differential Item Functioning in Polytomous Items

Science.gov (United States)

Wang, Wen-Chung; Shih, Ching-Lin

2010-01-01

Three multiple indicators-multiple causes (MIMIC) methods, namely, the standard MIMIC method (M-ST), the MIMIC method with scale purification (M-SP), and the MIMIC method with a pure anchor (M-PA), were developed to assess differential item functioning (DIF) in polytomous items. In a series of simulations, it appeared that all three methods…

Using Differential Item Functioning Procedures to Explore Sources of Item Difficulty and Group Performance Characteristics.

Science.gov (United States)

Scheuneman, Janice Dowd; Gerritz, Kalle

1990-01-01

Differential item functioning (DIF) methodology for revealing sources of item difficulty and performance characteristics of different groups was explored. A total of 150 Scholastic Aptitude Test items and 132 Graduate Record Examination general test items were analyzed. DIF was evaluated for males and females and Blacks and Whites. (SLD)

Cost-effectiveness of root caries preventive treatments.

Science.gov (United States)

Schwendicke, Falk; Göstemeyer, Gerd

2017-01-01

With a growing number of individuals retaining their teeth lifelong, often with periodontitis-induced root surface exposure, there is the need for cost-effective management strategies for root caries lesions. The present study aimed to assess the cost-effectiveness of root caries preventive treatments. Patients were simulated over 10 years using a Markov model. Four treatments were compared: No treatment, daily 225-800ppm fluoride rinses, chlorhexidine (CHX) varnish (2×/year), silver diamine fluoride (SDF) varnish (2×/year). Data from a systematic review were submitted to network meta-analysis for inferring relative efficacies of treatments. The health outcome was years of teeth being free of root caries. A mixed public-private payer perspective within 2016 German healthcare was taken, with costs being estimated from fee item catalogues or based on market prices. Populations with different numbers of teeth and tooth-level risks were modelled. Monte-Carlo microsimulations, univariate- and probabilistic sensitivity analyses were performed. In populations with 16 teeth at risk and low tooth-level risk for root caries, providing no preventive treatment was least costly, but also least effective (130 Euro, 144 years). SDF ranked next, being more costly (180 Euro), but also more effective (151 years). Payers willing to invest 8.30 Euro per root caries-free tooth-year found SDF most cost-effective. CHX varnish and fluoride rinse were not cost-effective. In populations with more teeth and high tooth-level risk, SDF was the most effective and least costly option. Root caries preventive treatments (like SDF) are effective and might even be cost-saving in high risk populations. Application of SDF can be recommended as a cost-saving treatment for prevention of root caries in patients with high risk of root caries. Copyright © 2016 Elsevier Ltd. All rights reserved.

Item Response Data Analysis Using Stata Item Response Theory Package

Science.gov (United States)

Yang, Ji Seung; Zheng, Xiaying

2018-01-01

The purpose of this article is to introduce and review the capability and performance of the Stata item response theory (IRT) package that is available from Stata v.14, 2015. Using a simulated data set and a publicly available item response data set extracted from Programme of International Student Assessment, we review the IRT package from…

Dissociation between source and item memory in Parkinson's disease

Institute of Scientific and Technical Information of China (English)

Hu Panpan; Li Youhai; Ma Huijuan; Xi Chunhua; Chen Xianwen; Wang Kai

2014-01-01

Background Episodic memory includes information about item memory and source memory.Many researches support the hypothesis that these two memory systems are implemented by different brain structures.The aim of this study was to investigate the characteristics of item memory and source memory processing in patients with Parkinson's disease (PD),and to further verify the hypothesis of dual-process model of source and item memory.Methods We established a neuropsychological battery to measure the performance of item memory and source memory.Totally 35 PD individuals and 35 matched healthy controls (HC) were administrated with the battery.Item memory task consists of the learning and recognition of high-frequency national Chinese characters; source memory task consists of the learning and recognition of three modes (character,picture,and image) of objects.Results Compared with the controls,the idiopathic PD patients have been impaired source memory (PD vs.HC:0.65±0.06 vs.0.72±0.09,P=0.001),but not impaired in item memory (PD vs.HC:0.65±0.07 vs.0.67±0.08,P=0.240).Conclusions The present experiment provides evidence for dissociation between item and source memory in PD patients,thereby strengthening the claim that the item or source memory rely on different brain structures.PD patients show poor source memory,in which dopamine plays a critical role.

Critical operations capabilities in a high cost environment: a multiple case study

Science.gov (United States)

Sansone, C.; Hilletofth, P.; Eriksson, D.

2018-04-01

Operations capabilities have been a popular research area for many years and several frameworks have been proposed in the literature. The current frameworks do not take specific contexts into consideration, for instance a high cost environment. This research gap is of particular interest since a manufacturing relocation process has been ongoing the last decades, leading to a huge amount of manufacturing being moved from high to low cost environments. The purpose of this study is to identify critical operations capabilities in a high cost environment. The two research questions were: What are the critical operations capabilities dimensions in a high cost environment? What are the critical operations capabilities in a high cost environment? A multiple case study was conducted and three Swedish manufacturing firms were selected. The study was based on the investigation of an existing framework of operations capabilities. The main dimensions of operations capabilities included in the framework were: cost, quality, delivery, flexibility, service, innovation and environment. Each of the dimensions included two or more operations capabilities. The findings confirmed the validity of the framework and its usefulness in a high cost environment and a new operations capability was revealed (employee flexibility).

Item Banking with Embedded Standards

Science.gov (United States)

MacCann, Robert G.; Stanley, Gordon

2009-01-01

An item banking method that does not use Item Response Theory (IRT) is described. This method provides a comparable grading system across schools that would be suitable for low-stakes testing. It uses the Angoff standard-setting method to obtain item ratings that are stored with each item. An example of such a grading system is given, showing how…

Low-Cost Bio-Based Carbon Fibers for High Temperature Processing

Energy Technology Data Exchange (ETDEWEB)

Paul, Ryan Michael [GrafTech International, Brooklyn Heights, OH (United States); Naskar, Amit [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-08-03

GrafTech International Holdings Inc. (GTI), under Award No. DE-EE0005779, worked with Oak Ridge National Laboratory (ORNL) under CRADA No. NFE-15-05807 to develop lignin-based carbon fiber (LBCF) technology and to demonstrate LBCF performance in high-temperature products and applications. This work was unique and different from other reported LBCF work in that this study was application-focused and scalability-focused. Accordingly, the executed work was based on meeting criteria based on technology development, cost, and application suitability. High-temperature carbon fiber based insulation is used in energy intensive industries, such as metal heat treating and ceramic and semiconductor material production. Insulation plays a critical role in achieving high thermal and process efficiency, which is directly related to energy usage, cost, and product competitiveness. Current high temperature insulation is made with petroleum based carbon fibers, and one goal of this protect was to develop and demonstrate an alternative lignin (biomass) based carbon fiber that would achieve lower cost, CO2 emissions, and energy consumption and result in insulation that met or exceeded the thermal efficiency of current commercial insulation. In addition, other products were targeted to be evaluated with LBCF. As the project was designed to proceed in stages, the initial focus of this work was to demonstrate lab-scale LBCF from at least 4 different lignin precursor feedstock sources that could meet the estimated production cost of $5.00/pound and have ash level of less than 500 ppm in the carbonized insulation-grade fiber. Accordingly, a preliminary cost model was developed based on publicly available information. The team demonstrated that 4 lignin samples met the cost criteria. In addition, the ash level for the 4 carbonized lignin samples was below 500 ppm. Processing as-received lignin to produce a high purity lignin fiber was a significant accomplishment in that most industrial

Offshore wind energy storage concept for cost-of-rated-power savings

International Nuclear Information System (INIS)

Qin, Chao; Saunders, Gordon; Loth, Eric

2017-01-01

Highlights: •Investigated CAES + HPT system concept for offshore wind energy; •Validated cost model for offshore wind farm including CAPEX and OPEX items; •Quantified cost-of-rated-power savings associated with CAES + HPT concept; •Estimated savings of 21.6% with CAES + HPT for a sample $2.92 billion project. -- Abstract: The size and number of off-shore wind turbines over the next decade is expected to rapidly increase due to the high wind energy potential and the ability of such farms to provide utility-scale energy. In this future, inexpensive and efficient on-site wind energy storage can be critical to address short-time (hourly) mismatches between wind supply and energy demand. This study investigates a compressed air energy storage (CAES) and hydraulic power transmission (HPT) system concept. To assess cost impact, the NREL Cost and Scaling Model was modified to improve accuracy and robustness for offshore wind farms with large turbines. Special attention was paid to the support structure, installation, electrical interface and connections, land leasing, and operations and maintenance cost items as well as specific increased/reduced costs reductions associated with CAES + HPT systems. This cost model was validated and applied to a sample $2.92 billion project Virginia Offshore case It was found that adaption of CAES + HPT can lead to a substantial savings of 21.6% of this 20-year lifetime cost by dramatically reducing capital and operating cost of the generator and power transmission components. However, there are several additional variables that can impact the off-shore energy policy and planning for this new CAES + HPT concept. Furthermore, these cost-savings are only first-order estimates based on linear mass-cost relationships, and thus detailed engineering and economic analysis are recommended.

Item Response Theory Analysis of the Psychopathic Personality Inventory-Revised.

Science.gov (United States)

Eichenbaum, Alexander E; Marcus, David K; French, Brian F

2017-06-01

This study examined item and scale functioning in the Psychopathic Personality Inventory-Revised (PPI-R) using an item response theory analysis. PPI-R protocols from 1,052 college student participants (348 male, 704 female) were analyzed. Analyses were conducted on the 131 self-report items comprising the PPI-R's eight content scales, using a graded response model. Scales collected a majority of their information about respondents possessing higher than average levels of the traits being measured. Each scale contained at least some items that evidenced limited ability to differentiate between respondents with differing levels of the trait being measured. Moreover, 80 items (61.1%) yielded significantly different responses between men and women presumably possessing similar levels of the trait being measured. Item performance was also influenced by the scoring format (directly scored vs. reverse-scored) of the items. Overall, the results suggest that the PPI-R, despite identifying psychopathic personality traits in individuals possessing high levels of those traits, may not identify these traits equally well for men and women, and scores are likely influenced by the scoring format of the individual item and scale.

Energy vulnerability. Far from urban centres, space heating and fuel costs weigh heavily on the household budget

International Nuclear Information System (INIS)

Cochez, Nicolas; Durieux, Eric; Levy, David; Moreau, Sylvain; Baudu-Baret, Claude

2015-01-01

For 15% of resident households in metropolitan France, the proportion of income going on home and water heating is high, in the sense that it is twice the median housing-expense to income ratio. With this same criterion, the cost of the most mandatory car journeys is high for 10% of households, in relation to their budgets. In all, 22% of households (i.e. 5.9 million) are experiencing energy vulnerability for one or other of the items of consumption, and 3% of households (i.e. 700 000) are vulnerable for both items. The risk of vulnerability varies over national territory, with differences depending on the items of expenditure considered: climate is the primary factor where disparity in housing-related vulnerability is concerned, whereas the predominant factor for travel is distance from urban centres

Low–Cost Bio-Based Carbon Fiber for High-Temperature Processing

Energy Technology Data Exchange (ETDEWEB)

Naskar, Amit K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Akato, Kokouvi M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Tran, Chau D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Paul, Ryan M. [GrafTech International Holdings, Inc., Brooklyn Heights, OH (United States); Dai, Xuliang [GrafTech International Holdings, Inc., Brooklyn Heights, OH (United States)

2017-02-01

GrafTech International Holdings Inc. (GTI), worked with Oak Ridge National Laboratory (ORNL) under CRADA No. NFE-15-05807 to develop lignin-based carbon fiber (LBCF) technology and to demonstrate LBCF performance in high-temperature products and applications. This work was unique and different from other reported LBCF work in that this study was application-focused and scalability-focused. Accordingly, the executed work was based on meeting criteria based on technology development, cost, and application suitability. The focus of this work was to demonstrate lab-scale LBCF from at least 4 different precursor feedstock sources that could meet the estimated production cost of $5.00/pound and have ash level of less than 500 ppm in the carbonized insulation-grade fiber. Accordingly, a preliminary cost model was developed based on publicly available information. The team demonstrated that 4 lignin samples met the cost criteria, as highlighted in Table 1. In addition, the ash level for the 4 carbonized lignin samples were below 500 ppm. Processing asreceived lignin to produce a high purity lignin fiber was a significant accomplishment in that most industrial lignin, prior to purification, had greater than 4X the ash level needed for this project, and prior to this work there was not a clear path of how to achieve the purity target. The lab scale development of LBCF was performed with a specific functional application in mind, specifically for high temperature rigid insulation. GTI is currently a consumer of foreignsourced pitch and rayon based carbon fibers for use in its high temperature insulation products, and the motivation was that LBCF had potential to decrease costs and increase product competitiveness in the marketplace through lowered raw material costs, lowered energy costs, and decreased environmental footprint. At the end of this project, the Technology Readiness Level (TRL) remained at 5 for LBCF in high temperature insulation.

Derating design for optimizing reliability and cost with an application to liquid rocket engines

International Nuclear Information System (INIS)

Kim, Kyungmee O.; Roh, Taeseong; Lee, Jae-Woo; Zuo, Ming J.

2016-01-01

Derating is the operation of an item at a stress that is lower than its rated design value. Previous research has indicated that reliability can be increased from operational derating. In order to derate an item in field operation, however, an engineer must rate the design of the item at a stress level higher than the operational stress level, which increases the item's nominal failure rate and development costs. At present, there is no model available to quantify the cost and reliability that considers the design uprating as well as the operational derating. In this paper, we establish the reliability expression in terms of the derating level assuming that the nominal failure rate is constant with time for a fixed rated design value. The total development cost is expressed in terms of the rated design value and the number of tests necessary to demonstrate the reliability requirement. The properties of the optimal derating level are explained for maximizing the reliability or for minimizing the cost. As an example, the proposed model is applied to the design of liquid rocket engines. - Highlights: • Modeled the effect of derating design on the reliability and the development cost. • Discovered that derating design may reduce the cost of reliability demonstration test. • Optimized the derating design parameter for reliability maximization or cost minimization.

P2-19: The Effect of item Repetition on Item-Context Association Depends on the Prior Exposure of Items

Directory of Open Access Journals (Sweden)

Hongmi Lee

2012-10-01

Full Text Available Previous studies have reported conflicting findings on whether item repetition has beneficial or detrimental effects on source memory. To reconcile such contradictions, we investigated whether the degree of pre-exposure of items can be a potential modulating factor. The experimental procedures spanned two consecutive days. On Day 1, participants were exposed to a set of unfamiliar faces. On Day 2, the same faces presented on the previous day were used again in half of the participants, whereas novel faces were used for the other half. Day 2 procedures consisted of three successive phases: item repetition, source association, and source memory test. In the item repetition phase, half of the face stimuli were repeatedly presented while participants were making male/female judgments. During the source association phase, both the repeated and the unrepeated faces appeared in one of the four locations on the screen. Finally, participants were tested on the location in which a given face was presented during the previous phase and reported the confidence of their memory. Source memory accuracy was measured as the percentage of correct non-guess trials. As results, we found a significant interaction between prior exposure and repetition. Repetition impaired source memory when the items had been pre-exposed on Day 1, while it led to greater accuracy in novel ones. These results show that pre-experimental exposure can modulate the effects of repetition on associative binding between an item and its contextual information, suggesting that pre-existing representation and novelty signal interact to form new episodic memory.

Development of low-cost high-performance multispectral camera system at Banpil

Science.gov (United States)

Oduor, Patrick; Mizuno, Genki; Olah, Robert; Dutta, Achyut K.

2014-05-01

Banpil Photonics (Banpil) has developed a low-cost high-performance multispectral camera system for Visible to Short- Wave Infrared (VIS-SWIR) imaging for the most demanding high-sensitivity and high-speed military, commercial and industrial applications. The 640x512 pixel InGaAs uncooled camera system is designed to provide a compact, smallform factor to within a cubic inch, high sensitivity needing less than 100 electrons, high dynamic range exceeding 190 dB, high-frame rates greater than 1000 frames per second (FPS) at full resolution, and low power consumption below 1W. This is practically all the feature benefits highly desirable in military imaging applications to expand deployment to every warfighter, while also maintaining a low-cost structure demanded for scaling into commercial markets. This paper describes Banpil's development of the camera system including the features of the image sensor with an innovation integrating advanced digital electronics functionality, which has made the confluence of high-performance capabilities on the same imaging platform practical at low cost. It discusses the strategies employed including innovations of the key components (e.g. focal plane array (FPA) and Read-Out Integrated Circuitry (ROIC)) within our control while maintaining a fabless model, and strategic collaboration with partners to attain additional cost reductions on optics, electronics, and packaging. We highlight the challenges and potential opportunities for further cost reductions to achieve a goal of a sub-$1000 uncooled high-performance camera system. Finally, a brief overview of emerging military, commercial and industrial applications that will benefit from this high performance imaging system and their forecast cost structure is presented.

Controllable deterioration rate for time-dependent demand and time-varying holding cost

Directory of Open Access Journals (Sweden)

Mishra Vinod Kumar

2014-01-01

Full Text Available In this paper, we develop an inventory model for non-instantaneous deteriorating items under the consideration of the facts: deterioration rate can be controlled by using the preservation technology (PT during deteriorating period, and holding cost and demand rate both are linear function of time, which was treated as constant in most of the deteriorating inventory models. So in this paper, we developed a deterministic inventory model for non-instantaneous deteriorating items in which both demand rate and holding cost are a linear function of time, deterioration rate is constant, backlogging rate is variable and depend on the length of the next replenishment, shortages are allowed and partially backlogged. The model is solved analytically by minimizing the total cost of the inventory system. The model can be applied to optimizing the total inventory cost of non-instantaneous deteriorating items inventory for the business enterprises, where the preservation technology is used to control the deterioration rate, and demand & holding cost both are a linear function of time.

Engineering and Design: Civil Works Cost Engineering

Science.gov (United States)

1994-03-31

labor cost requirements are broken into tasks of work. Each task is usually performd by a labor crew. Crews may vary in size and mix of skills. The...requested in advance of the expected purchase date. Suppliers are reluctant to guarantee future pricw and ofien will only quote current prices. It may be...unit cost is the overhead cost for the item. g. Sources for Pricing. The Cost Engineer must rely on judgement, historical data, and current labor market

41 CFR 101-27.507 - Transportation and other costs.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Transportation and other costs. 101-27.507 Section 101-27.507 Public Contracts and Property Management Federal Property... MANAGEMENT 27.5-Return of GSA Stock Items § 101-27.507 Transportation and other costs. Transportation costs...

Investigating the Impact of Item Parameter Drift for Item Response Theory Models with Mixture Distributions

Directory of Open Access Journals (Sweden)

Yoon Soo ePark

2016-02-01

Full Text Available This study investigates the impact of item parameter drift (IPD on parameter and ability estimation when the underlying measurement model fits a mixture distribution, thereby violating the item invariance property of unidimensional item response theory (IRT models. An empirical study was conducted to demonstrate the occurrence of both IPD and an underlying mixture distribution using real-world data. Twenty-one trended anchor items from the 1999, 2003, and 2007 administrations of Trends in International Mathematics and Science Study (TIMSS were analyzed using unidimensional and mixture IRT models. TIMSS treats trended anchor items as invariant over testing administrations and uses pre-calibrated item parameters based on unidimensional IRT. However, empirical results showed evidence of two latent subgroups with IPD. Results showed changes in the distribution of examinee ability between latent classes over the three administrations. A simulation study was conducted to examine the impact of IPD on the estimation of ability and item parameters, when data have underlying mixture distributions. Simulations used data generated from a mixture IRT model and estimated using unidimensional IRT. Results showed that data reflecting IPD using mixture IRT model led to IPD in the unidimensional IRT model. Changes in the distribution of examinee ability also affected item parameters. Moreover, drift with respect to item discrimination and distribution of examinee ability affected estimates of examinee ability. These findings demonstrate the need to caution and evaluate IPD using a mixture IRT framework to understand its effect on item parameters and examinee ability.

Investigating the Impact of Item Parameter Drift for Item Response Theory Models with Mixture Distributions.

Science.gov (United States)

Park, Yoon Soo; Lee, Young-Sun; Xing, Kuan

2016-01-01

This study investigates the impact of item parameter drift (IPD) on parameter and ability estimation when the underlying measurement model fits a mixture distribution, thereby violating the item invariance property of unidimensional item response theory (IRT) models. An empirical study was conducted to demonstrate the occurrence of both IPD and an underlying mixture distribution using real-world data. Twenty-one trended anchor items from the 1999, 2003, and 2007 administrations of Trends in International Mathematics and Science Study (TIMSS) were analyzed using unidimensional and mixture IRT models. TIMSS treats trended anchor items as invariant over testing administrations and uses pre-calibrated item parameters based on unidimensional IRT. However, empirical results showed evidence of two latent subgroups with IPD. Results also showed changes in the distribution of examinee ability between latent classes over the three administrations. A simulation study was conducted to examine the impact of IPD on the estimation of ability and item parameters, when data have underlying mixture distributions. Simulations used data generated from a mixture IRT model and estimated using unidimensional IRT. Results showed that data reflecting IPD using mixture IRT model led to IPD in the unidimensional IRT model. Changes in the distribution of examinee ability also affected item parameters. Moreover, drift with respect to item discrimination and distribution of examinee ability affected estimates of examinee ability. These findings demonstrate the need to caution and evaluate IPD using a mixture IRT framework to understand its effects on item parameters and examinee ability.

Improved Approximation Algorithms for Item Pricing with Bounded Degree and Valuation

Science.gov (United States)

Hamane, Ryoso; Itoh, Toshiya

When a store sells items to customers, the store wishes to decide the prices of the items to maximize its profit. If the store sells the items with low (resp. high) prices, the customers buy more (resp. less) items, which provides less profit to the store. It would be hard for the store to decide the prices of items. Assume that a store has a set V of n items and there is a set C of m customers who wish to buy those items. The goal of the store is to decide the price of each item to maximize its profit. We refer to this maximization problem as an item pricing problem. We classify the item pricing problems according to how many items the store can sell or how the customers valuate the items. If the store can sell every item i with unlimited (resp. limited) amount, we refer to this as unlimited supply (resp. limited supply). We say that the item pricing problem is single-minded if each customer j∈C wishes to buy a set ej⊆V of items and assigns valuation w(ej)≥0. For the single-minded item pricing problems (in unlimited supply), Balcan and Blum regarded them as weighted k-hypergraphs and gave several approximation algorithms. In this paper, we focus on the (pseudo) degree of k-hypergraphs and the valuation ratio, i. e., the ratio between the smallest and the largest valuations. Then for the single-minded item pricing problems (in unlimited supply), we show improved approximation algorithms (for k-hypergraphs, general graphs, bipartite graphs, etc.) with respect to the maximum (pseudo) degree and the valuation ratio.

Do people with and without medical conditions respond similarly to the short health anxiety inventory? An assessment of differential item functioning using item response theory.

Science.gov (United States)

LeBouthillier, Daniel M; Thibodeau, Michel A; Alberts, Nicole M; Hadjistavropoulos, Heather D; Asmundson, Gordon J G

2015-04-01

Individuals with medical conditions are likely to have elevated health anxiety; however, research has not demonstrated how medical status impacts response patterns on health anxiety measures. Measurement bias can undermine the validity of a questionnaire by overestimating or underestimating scores in groups of individuals. We investigated whether the Short Health Anxiety Inventory (SHAI), a widely-used measure of health anxiety, exhibits medical condition-based bias on item and subscale levels, and whether the SHAI subscales adequately assess the health anxiety continuum. Data were from 963 individuals with diabetes, breast cancer, or multiple sclerosis, and 372 healthy individuals. Mantel-Haenszel tests and item characteristic curves were used to classify the severity of item-level differential item functioning in all three medical groups compared to the healthy group. Test characteristic curves were used to assess scale-level differential item functioning and whether the SHAI subscales adequately assess the health anxiety continuum. Nine out of 14 items exhibited differential item functioning. Two items exhibited differential item functioning in all medical groups compared to the healthy group. In both Thought Intrusion and Fear of Illness subscales, differential item functioning was associated with mildly deflated scores in medical groups with very high levels of the latent traits. Fear of Illness items poorly discriminated between individuals with low and very low levels of the latent trait. While individuals with medical conditions may respond differentially to some items, clinicians and researchers can confidently use the SHAI with a variety of medical populations without concern of significant bias. Copyright © 2015 Elsevier Inc. All rights reserved.

The costs and cost-efficiency of providing food through schools in areas of high food insecurity.

Science.gov (United States)

Gelli, Aulo; Al-Shaiba, Najeeb; Espejo, Francisco

2009-03-01

The provision of food in and through schools has been used to support the education, health, and nutrition of school-aged children. The monitoring of financial inputs into school health and nutrition programs is critical for a number of reasons, including accountability, transparency, and equity. Furthermore, there is a gap in the evidence on the costs, cost-efficiency, and cost-effectiveness of providing food through schools, particularly in areas of high food insecurity. To estimate the programmatic costs and cost-efficiency associated with providing food through schools in food-insecure, developing-country contexts, by analyzing global project data from the World Food Programme (WFP). Project data, including expenditures and number of schoolchildren covered, were collected through project reports and validated through WFP Country Office records. Yearly project costs per schoolchild were standardized over a set number of feeding days and the amount of energy provided by the average ration. Output metrics, such as tonnage, calories, and micronutrient content, were used to assess the cost-efficiency of the different delivery mechanisms. The average yearly expenditure per child, standardized over a 200-day on-site feeding period and an average ration, excluding school-level costs, was US$21.59. The costs varied substantially according to choice of food modality, with fortified biscuits providing the least costly option of about US$11 per year and take-home rations providing the most expensive option at approximately US$52 per year. Comparisons across the different food modalities suggested that fortified biscuits provide the most cost-efficient option in terms of micronutrient delivery (particularly vitamin A and iodine), whereas on-site meals appear to be more efficient in terms of calories delivered. Transportation and logistics costs were the main drivers for the high costs. The choice of program objectives will to a large degree dictate the food modality

Activity-Based Costing in the After Press Services Industry

Science.gov (United States)

Shevasuthisilp, Suntichai; Punsathitwong, Kosum

2009-10-01

This research was conducted to apply activity-based costing (ABC) in an after press service company in Chiang Mai province, Thailand. The company produces all of its products by one-stop service (such as coating, stitching, binding, die cutting, and gluing). All products are made to order, and have different sizes and patterns. A strategy of low price is used to compete in the marketplace. After cost analysis, the study found that the company has high overhead (36.5% of total cost). The company's problem is its use of traditional cost accounting, which has low accuracy in assigning overhead costs. If management uses this information when pricing customer orders, losses may occur because real production costs may be higher than the selling price. Therefore, the application of ABC in cost analysis can help executives receive accurate cost information; establish a sound pricing strategy; and improve the manufacturing process by determining work activities which have excessively high production costs. According to this research, 6 out of 56 items had a production cost higher than the selling price, leading to losses of 123,923 baht per year. Methods used to solve this problem were: reducing production costs; establishing suitable prices; and creating a sales promotion with lower prices for customers whose orders include processes involving unused capacity. These actions will increase overall sales of the company, and allow more efficient use of its machinery.

Specialized surveillance for individuals at high risk for melanoma: a cost analysis of a high-risk clinic.

Science.gov (United States)

Watts, Caroline G; Cust, Anne E; Menzies, Scott W; Coates, Elliot; Mann, Graham J; Morton, Rachael L

2015-02-01

Regular surveillance of individuals at high risk for cutaneous melanoma improves early detection and reduces unnecessary excisions; however, a cost analysis of this specialized service has not been undertaken. To determine the mean cost per patient of surveillance in a high-risk clinic from the health service and societal perspectives. We used a bottom-up microcosting method to measure resource use in a consecutive sample of 102 patients treated in a high-risk hospital-based clinic in Australia during a 12-month period. Surveillance and treatment of melanoma. All surveillance and treatment procedures were identified through direct observation, review of medical records, and interviews with staff and were valued using scheduled fees from the Australian government. Societal costs included transportation and loss of productivity. The mean number of clinic visits per year was 2.7 (95% CI, 2.5-2.8) for surveillance and 3.8 (95% CI, 3.4-4.1) for patients requiring surgical excisions. The mean annual cost per patient to the health system was A $882 (95% CI, A $783-$982) (US $599 [95% CI, US $532-$665]); the cost discounted across 20 years was A $11,546 (95% CI, A $10,263-$12,829) (US $7839 [95% CI, US $6969-$8710]). The mean annual societal cost per patient (excluding health system costs) was A $972 (95% CI, A $899-$1045) (US $660 [95% CI, US $611-$710]); the cost discounted across 20 years was A $12,721 (95% CI, A $12,554-$14,463) (US $8637 [95% CI, US $8523-$9820]). Diagnosis of melanoma or nonmelanoma skin cancer and frequent excisions for benign lesions in a relatively small number of patients was responsible for positively skewed health system costs. Microcosting techniques provide an accurate cost estimate for the provision of a specialized service. The high societal cost reflects the time that patients are willing to invest to attend the high-risk clinic. This alternative model of care for a high-risk population has relevance for decision making about health policy.

High costs of female choice in a lekking lizard.

Directory of Open Access Journals (Sweden)

Maren N Vitousek

2007-06-01

Full Text Available Although the cost of mate choice is an essential component of the evolution and maintenance of sexual selection, the energetic cost of female choice has not previously been assessed directly. Here we report that females can incur high energetic costs as a result of discriminating among potential mates. We used heart rate biologging to quantify energetic expenditure in lek-mating female Galápagos marine iguanas (Amblyrhynchus cristatus. Receptive females spent 78.9+/-23.2 kJ of energy on mate choice over a 30-day period, which is equivalent to approximately (3/4 of one day's energy budget. Females that spent more time on the territories of high-quality, high-activity males displayed greater energetic expenditure on mate choice, lost more mass, and showed a trend towards producing smaller follicles. Choosy females also appear to face a reduced probability of survival if El Niño conditions occur in the year following breeding. These findings indicate that female choice can carry significant costs, and suggest that the benefits that lek-mating females gain through mating with a preferred male may be higher than previously predicted.

Identifying Promising Items: The Use of Crowdsourcing in the Development of Assessment Instruments

Science.gov (United States)

Sadler, Philip M.; Sonnert, Gerhard; Coyle, Harold P.; Miller, Kelly A.

2016-01-01

The psychometrically sound development of assessment instruments requires pilot testing of candidate items as a first step in gauging their quality, typically a time-consuming and costly effort. Crowdsourcing offers the opportunity for gathering data much more quickly and inexpensively than from most targeted populations. In a simulation of a…

Life cycle costing of waste management systems: overview, calculation principles and case studies.

Science.gov (United States)

Martinez-Sanchez, Veronica; Kromann, Mikkel A; Astrup, Thomas Fruergaard

2015-02-01

This paper provides a detailed and comprehensive cost model for the economic assessment of solid waste management systems. The model was based on the principles of Life Cycle Costing (LCC) and followed a bottom-up calculation approach providing detailed cost items for all key technologies within modern waste systems. All technologies were defined per tonne of waste input, and each cost item within a technology was characterised by both a technical and an economic parameter (for example amount and cost of fuel related to waste collection), to ensure transparency, applicability and reproducibility. Cost items were classified as: (1) budget costs, (2) transfers (for example taxes, subsidies and fees) and (3) externality costs (for example damage or abatement costs related to emissions and disamenities). Technology costs were obtained as the sum of all cost items (of the same type) within a specific technology, while scenario costs were the sum of all technologies involved in a scenario. The cost model allows for the completion of three types of LCC: a Conventional LCC, for the assessment of financial costs, an Environmental LCC, for the assessment of financial costs whose results are complemented by a Life Cycle Assessment (LCA) for the same system, and a Societal LCC, for socio-economic assessments. Conventional and Environmental LCCs includes budget costs and transfers, while Societal LCCs includes budget and externality costs. Critical aspects were found in the existing literature regarding the cost assessment of waste management, namely system boundary equivalency, accounting for temporally distributed emissions and impacts, inclusions of transfers, the internalisation of environmental impacts and the coverage of shadow prices, and there was also significant confusion regarding terminology. The presented cost model was implemented in two case study scenarios assessing the costs involved in the source segregation of organic waste from 100,000 Danish households and

An inventory model for generalized weibull deteriorating items with price dependent demand and permissible delay in payments under inflation

Directory of Open Access Journals (Sweden)

S.P.Singh

2015-09-01

Full Text Available This paper derives an inventory model is developed for items that deteriorates at a generalized Weibull distributed rate when demand for the items is dependent on the selling price. Shortages are not allowed and price inflation is taken into consideration over finite planning horizon. A brief analysis of the cost involved is carried out by theoretical analysis.

Life sciences payload definition and integration study. Volume 3: Preliminary equipment item specification catalog for the carry-on laboratories. [for Spacelab

Science.gov (United States)

1974-01-01

All general purpose equipment items contained in the final carry-on laboratory (COL) design concepts are described in terms of specific requirements identified for COL use, hardware status, and technical parameters such as weight, volume, power, range, and precision. Estimated costs for each item are given, along with projected development times.

Low Cost, High Efficiency, High Pressure Hydrogen Storage

Energy Technology Data Exchange (ETDEWEB)

Mark Leavitt

2010-03-31

A technical and design evaluation was carried out to meet DOE hydrogen fuel targets for 2010. These targets consisted of a system gravimetric capacity of 2.0 kWh/kg, a system volumetric capacity of 1.5 kWh/L and a system cost of $4/kWh. In compressed hydrogen storage systems, the vast majority of the weight and volume is associated with the hydrogen storage tank. In order to meet gravimetric targets for compressed hydrogen tanks, 10,000 psi carbon resin composites were used to provide the high strength required as well as low weight. For the 10,000 psi tanks, carbon fiber is the largest portion of their cost. Quantum Technologies is a tier one hydrogen system supplier for automotive companies around the world. Over the course of the program Quantum focused on development of technology to allow the compressed hydrogen storage tank to meet DOE goals. At the start of the program in 2004 Quantum was supplying systems with a specific energy of 1.1-1.6 kWh/kg, a volumetric capacity of 1.3 kWh/L and a cost of $73/kWh. Based on the inequities between DOE targets and Quantum’s then current capabilities, focus was placed first on cost reduction and second on weight reduction. Both of these were to be accomplished without reduction of the fuel system’s performance or reliability. Three distinct areas were investigated; optimization of composite structures, development of “smart tanks” that could monitor health of tank thus allowing for lower design safety factor, and the development of “Cool Fuel” technology to allow higher density gas to be stored, thus allowing smaller/lower pressure tanks that would hold the required fuel supply. The second phase of the project deals with three additional distinct tasks focusing on composite structure optimization, liner optimization, and metal.

Converging evidence for control of color-word Stroop interference at the item level.

Science.gov (United States)

Bugg, Julie M; Hutchison, Keith A

2013-04-01

Prior studies have shown that cognitive control is implemented at the list and context levels in the color-word Stroop task. At first blush, the finding that Stroop interference is reduced for mostly incongruent items as compared with mostly congruent items (i.e., the item-specific proportion congruence [ISPC] effect) appears to provide evidence for yet a third level of control, which modulates word reading at the item level. However, evidence to date favors the view that ISPC effects reflect the rapid prediction of high-contingency responses and not item-specific control. In Experiment 1, we first show that an ISPC effect is obtained when the relevant dimension (i.e., color) signals proportion congruency, a problematic pattern for theories based on differential response contingencies. In Experiment 2, we replicate and extend this pattern by showing that item-specific control settings transfer to new stimuli, ruling out alternative frequency-based accounts. In Experiment 3, we revert to the traditional design in which the irrelevant dimension (i.e., word) signals proportion congruency. Evidence for item-specific control, including transfer of the ISPC effect to new stimuli, is apparent when 4-item sets are employed but not when 2-item sets are employed. We attribute this pattern to the absence of high-contingency responses on incongruent trials in the 4-item set. These novel findings provide converging evidence for reactive control of color-word Stroop interference at the item level, reveal theoretically important factors that modulate reliance on item-specific control versus contingency learning, and suggest an update to the item-specific control account (Bugg, Jacoby, & Chanani, 2011).

Brief Sensation Seeking Scale: Latent structure of 8-item and 4-item versions in Peruvian adolescents.

Science.gov (United States)

Merino-Soto, Cesar; Salas Blas, Edwin

2018-01-01

This research intended to validate two brief scales of sensations seeking with Peruvian adolescents: the eight item scale (BSSS8; Hoyle, Stephenson, Palmgreen, Lorch, y Donohew, 2002) and the four item scale (BSSS4; Stephenson, Hoyle, Slater, y Palmgreen, 2003). Questionnaires were administered to 618 voluntary participants, with an average age of 13.6 years, from different levels of high school, state and private school in a district in the south of Lima. It analyzed the internal structure of both short versions using three models: a) unidimensional (M1), b) oblique or related dimensions (M2), and c) the bifactor model (M3). Results show that both instruments have a single dimension which best represents the variability of the items; a fact that can be explained both by the complexity of the concept and by the small number of items representing each factor, which is more noticeable in the BSSS4. Reliability is within levels found by previous studies: alpha: .745 = BSSS8 and BSSS4 =. 643; omega coefficient: .747 in BSSS8 and .651 in BSSS4. These are considered suitable for the type of instruments studied. Based on the correlation between the two instruments, it was found that there are satisfactory levels of equivalence between the BSSS8 and BSSS4. However, it is recommended that the BSSS4 is mainly used for research and for the purpose of describing populations.

19 CFR 10.814 - Direct costs of processing operations.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Direct costs of processing operations. 10.814... Free Trade Agreement Rules of Origin § 10.814 Direct costs of processing operations. (a) Items included. For purposes of § 10.810(b) of this subpart, the words “direct costs of processing operations”, with...

19 CFR 10.774 - Direct costs of processing operations.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Direct costs of processing operations. 10.774... Free Trade Agreement Rules of Origin § 10.774 Direct costs of processing operations. (a) Items included. For purposes of § 10.770(b) of this subpart, the words “direct costs of processing operations”, with...

The role of mental health and addiction among high-cost patients: a population-based study.

Science.gov (United States)

de Oliveira, Claire; Cheng, Joyce; Rehm, Jürgen; Kurdyak, Paul

2018-04-01

Previous work found that, among high-cost patients, those with a majority of mental health and addiction (MHA)-related costs (>50%) incur over 30% more costs than other high-cost patients. However, this work did not examine other high-cost patients in depth or whether they had any MHA-related costs. The objective of this analysis was to examine the role of MHA-related care among other high-cost patients. Using administrative healthcare data from Ontario, Canada, this study selected all patients in the 90th percentile of the cost distribution in 2012. It focused primarily on two groups based on the percentage of MHA-related costs relative to total costs: (1) high-cost patients with some MHA-related costs (0% > and cost patients with no MHA-related costs (0%). We examined socio-demographic and clinical characteristics, utilization and costs for both groups, and modeled patient-level costs using appropriate regression techniques. We also compared these groups with high-cost patients with a majority of MHA-related costs (>50%). High-cost patients with some MHA-related costs incurred over 40% more costs than those without ($27,883 vs $19,702). Patients with some MHA-related costs were older, lived in poorer neighborhoods, and had higher levels of comorbidity compared to those without. After controlling for relevant variables, having any type of MHA-related utilization increased costs by $2,698. Having a diagnosis of psychosis had a large impact on costs. This study did not examine children and adolescents. We were only able to account for 91% of all costs incurred by the public third-party payer; addiction-related costs from community-based agencies were not available. High-cost patients with MHA incur higher costs compared to those without. When considering interventions aimed at high-cost patients, policy-makers should consider their complex nature, specifically both their physical and MHA-related comorbidities.

Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries

Science.gov (United States)

Li, Jianlin; Du, Zhijia; Ruther, Rose E.; AN, Seong Jin; David, Lamuel Abraham; Hays, Kevin; Wood, Marissa; Phillip, Nathan D.; Sheng, Yangping; Mao, Chengyu; Kalnaus, Sergiy; Daniel, Claus; Wood, David L.

2017-09-01

Reducing cost and increasing energy density are two barriers for widespread application of lithium-ion batteries in electric vehicles. Although the cost of electric vehicle batteries has been reduced by 70% from 2008 to 2015, the current battery pack cost (268/kWh in 2015) is still >2 times what the USABC targets (125/kWh). Even though many advancements in cell chemistry have been realized since the lithium-ion battery was first commercialized in 1991, few major breakthroughs have occurred in the past decade. Therefore, future cost reduction will rely on cell manufacturing and broader market acceptance. This article discusses three major aspects for cost reduction: (1) quality control to minimize scrap rate in cell manufacturing; (2) novel electrode processing and engineering to reduce processing cost and increase energy density and throughputs; and (3) material development and optimization for lithium-ion batteries with high-energy density. Insights on increasing energy and power densities of lithium-ion batteries are also addressed.

The Technical Quality of Test Items Generated Using a Systematic Approach to Item Writing.

Science.gov (United States)

Siskind, Theresa G.; Anderson, Lorin W.

The study was designed to examine the similarity of response options generated by different item writers using a systematic approach to item writing. The similarity of response options to student responses for the same item stems presented in an open-ended format was also examined. A non-systematic (subject matter expertise) approach and a…

Automated packaging platform for low-cost high-performance optical components manufacturing

Science.gov (United States)

Ku, Robert T.

2004-05-01

Delivering high performance integrated optical components at low cost is critical to the continuing recovery and growth of the optical communications industry. In today's market, network equipment vendors need to provide their customers with new solutions that reduce operating expenses and enable new revenue generating IP services. They must depend on the availability of highly integrated optical modules exhibiting high performance, small package size, low power consumption, and most importantly, low cost. The cost of typical optical system hardware is dominated by linecards that are in turn cost-dominated by transmitters and receivers or transceivers and transponders. Cost effective packaging of optical components in these small size modules is becoming the biggest challenge to be addressed. For many traditional component suppliers in our industry, the combination of small size, high performance, and low cost appears to be in conflict and not feasible with conventional product design concepts and labor intensive manual assembly and test. With the advent of photonic integration, there are a variety of materials, optics, substrates, active/passive devices, and mechanical/RF piece parts to manage in manufacturing to achieve high performance at low cost. The use of automation has been demonstrated to surpass manual operation in cost (even with very low labor cost) as well as product uniformity and quality. In this paper, we will discuss the value of using an automated packaging platform.for the assembly and test of high performance active components, such as 2.5Gb/s and 10 Gb/s sources and receivers. Low cost, high performance manufacturing can best be achieved by leveraging a flexible packaging platform to address a multitude of laser and detector devices, integration of electronics and handle various package bodies and fiber configurations. This paper describes the operation and results of working robotic assemblers in the manufacture of a Laser Optical Subassembly

A mathematical model for order splitting in a multiple supplier single-item inventory system

DEFF Research Database (Denmark)

Abginehchi, Soheil; Farahani, Reza Zanjirani; Rezapour, Shabnam

2013-01-01

systems. The item acquisition lead times of suppliers are random variables. Backorder is allowed and shortage cost is charged based on not only per unit in shortage but also per time unit. Continuous review (s,Q) policy has been assumed. When the inventory level depletes to a reorder level, the total...... order is split among n suppliers. Since the suppliers have different characteristics, the quantity ordered to different suppliers may be different. The problem is to determine the reorder level and quantity ordered to each supplier so that the expected total cost per time unit, including ordering cost......, procurement cost, inventory holding cost, and shortage cost, is minimized. We also conduct extensive numerical experiments to show the advantages of our model compared with the models in the literature. According to our extensive experiments, the model developed in this paper is the best model...

Local context effects during emotional item directed forgetting in younger and older adults.

Science.gov (United States)

Gallant, Sara N; Dyson, Benjamin J; Yang, Lixia

2017-09-01

This paper explored the differential sensitivity young and older adults exhibit to the local context of items entering memory. We examined trial-to-trial performance during an item directed forgetting task for positive, negative, and neutral (or baseline) words each cued as either to-be-remembered (TBR) or to-be-forgotten (TBF). This allowed us to focus on how variations in emotional valence (independent of arousal) and instruction (TBR vs. TBF) of the previous item (trial n-1) impacted memory for the current item (trial n) during encoding. Different from research showing impairing effects of emotional arousal, both age groups showed a memorial boost for stimuli when preceded by items high in positive or negative valence relative to those preceded by neutral items. This advantage was particularly prominent for neutral trial n items that followed emotional items suggesting that, regardless of age, neutral memories may be strengthened by a local context that is high in valence. A trending age difference also emerged with older adults showing greater sensitivity when encoding instructions changed between trial n-1 and n. Results are discussed in light of age-related theories of cognitive and emotional processing, highlighting the need to consider the dynamic, moment-to-moment fluctuations of these systems.

Generalizability theory and item response theory

NARCIS (Netherlands)

Glas, Cornelis A.W.; Eggen, T.J.H.M.; Veldkamp, B.P.

2012-01-01

Item response theory is usually applied to items with a selected-response format, such as multiple choice items, whereas generalizability theory is usually applied to constructed-response tasks assessed by raters. However, in many situations, raters may use rating scales consisting of items with a

Rats Remember Items in Context Using Episodic Memory.

Science.gov (United States)

Panoz-Brown, Danielle; Corbin, Hannah E; Dalecki, Stefan J; Gentry, Meredith; Brotheridge, Sydney; Sluka, Christina M; Wu, Jie-En; Crystal, Jonathon D

2016-10-24

Vivid episodic memories in people have been characterized as the replay of unique events in sequential order [1-3]. Animal models of episodic memory have successfully documented episodic memory of a single event (e.g., [4-8]). However, a fundamental feature of episodic memory in people is that it involves multiple events, and notably, episodic memory impairments in human diseases are not limited to a single event. Critically, it is not known whether animals remember many unique events using episodic memory. Here, we show that rats remember many unique events and the contexts in which the events occurred using episodic memory. We used an olfactory memory assessment in which new (but not old) odors were rewarded using 32 items. Rats were presented with 16 odors in one context and the same odors in a second context. To attain high accuracy, the rats needed to remember item in context because each odor was rewarded as a new item in each context. The demands on item-in-context memory were varied by assessing memory with 2, 3, 5, or 15 unpredictable transitions between contexts, and item-in-context memory survived a 45 min retention interval challenge. When the memory of item in context was put in conflict with non-episodic familiarity cues, rats relied on item in context using episodic memory. Our findings suggest that rats remember multiple unique events and the contexts in which these events occurred using episodic memory and support the view that rats may be used to model fundamental aspects of human cognition. Copyright © 2016 Elsevier Ltd. All rights reserved.

Integrated cost estimation methodology to support high-performance building design

Energy Technology Data Exchange (ETDEWEB)

Vaidya, Prasad; Greden, Lara; Eijadi, David; McDougall, Tom [The Weidt Group, Minnetonka (United States); Cole, Ray [Axiom Engineers, Monterey (United States)

2007-07-01

Design teams evaluating the performance of energy conservation measures (ECMs) calculate energy savings rigorously with established modelling protocols, accounting for the interaction between various measures. However, incremental cost calculations do not have a similar rigor. Often there is no recognition of cost reductions with integrated design, nor is there assessment of cost interactions amongst measures. This lack of rigor feeds the notion that high-performance buildings cost more, creating a barrier for design teams pursuing aggressive high-performance outcomes. This study proposes an alternative integrated methodology to arrive at a lower perceived incremental cost for improved energy performance. The methodology is based on the use of energy simulations as means towards integrated design and cost estimation. Various points along the spectrum of integration are identified and characterized by the amount of design effort invested, the scheduling of effort, and relative energy performance of the resultant design. It includes a study of the interactions between building system parameters as they relate to capital costs. Several cost interactions amongst energy measures are found to be significant.The value of this approach is demonstrated with alternatives in a case study that shows the differences between perceived costs for energy measures along various points on the integration spectrum. These alternatives show design tradeoffs and identify how decisions would have been different with a standard costing approach. Areas of further research to make the methodology more robust are identified. Policy measures to encourage the integrated approach and reduce the barriers towards improved energy performance are discussed.

CONSTRUCTION OF A DIFFERENTIAL ISOTHERMAL CALORIMETER OF HIGH SENSITIVITY AND LOW COST.

OpenAIRE

Trinca, RB; Perles, CE; Volpe, PLO

2009-01-01

CONSTRUCTION OF A DIFFERENTIAL ISOTHERMAL CALORIMETER OF HIGH SENSITIVITY AND LOW COST The high cost of sensitivity commercial calorimeters may represent an obstacle for many calorimetric research groups. This work describes (fie construction and calibration of a batch differential heat conduction calorimeter with sample cells volumes of about 400 mu L. The calorimeter was built using two small high sensibility square Peltier thermoelectric sensors and the total cost was estimated to be about...

Dissociating the neural correlates of intra-item and inter-item working-memory binding.

Directory of Open Access Journals (Sweden)

Carinne Piekema

Full Text Available BACKGROUND: Integration of information streams into a unitary representation is an important task of our cognitive system. Within working memory, the medial temporal lobe (MTL has been conceptually linked to the maintenance of bound representations. In a previous fMRI study, we have shown that the MTL is indeed more active during working-memory maintenance of spatial associations as compared to non-spatial associations or single items. There are two explanations for this result, the mere presence of the spatial component activates the MTL, or the MTL is recruited to bind associations between neurally non-overlapping representations. METHODOLOGY/PRINCIPAL FINDINGS: The current fMRI study investigates this issue further by directly comparing intrinsic intra-item binding (object/colour, extrinsic intra-item binding (object/location, and inter-item binding (object/object. The three binding conditions resulted in differential activation of brain regions. Specifically, we show that the MTL is important for establishing extrinsic intra-item associations and inter-item associations, in line with the notion that binding of information processed in different brain regions depends on the MTL. CONCLUSIONS/SIGNIFICANCE: Our findings indicate that different forms of working-memory binding rely on specific neural structures. In addition, these results extend previous reports indicating that the MTL is implicated in working-memory maintenance, challenging the classic distinction between short-term and long-term memory systems.

Generalizability theory and item response theory

OpenAIRE

Glas, Cornelis A.W.; Eggen, T.J.H.M.; Veldkamp, B.P.

2012-01-01

Item response theory is usually applied to items with a selected-response format, such as multiple choice items, whereas generalizability theory is usually applied to constructed-response tasks assessed by raters. However, in many situations, raters may use rating scales consisting of items with a selected-response format. This chapter presents a short overview of how item response theory and generalizability theory were integrated to model such assessments. Further, the precision of the esti...

The 12-item World Health Organization Disability Assessment Schedule II (WHO-DAS II: a nonparametric item response analysis

Directory of Open Access Journals (Sweden)

Fernandez Ana

2010-05-01

Full Text Available Abstract Background Previous studies have analyzed the psychometric properties of the World Health Organization Disability Assessment Schedule II (WHO-DAS II using classical omnibus measures of scale quality. These analyses are sample dependent and do not model item responses as a function of the underlying trait level. The main objective of this study was to examine the effectiveness of the WHO-DAS II items and their options in discriminating between changes in the underlying disability level by means of item response analyses. We also explored differential item functioning (DIF in men and women. Methods The participants were 3615 adult general practice patients from 17 regions of Spain, with a first diagnosed major depressive episode. The 12-item WHO-DAS II was administered by the general practitioners during the consultation. We used a non-parametric item response method (Kernel-Smoothing implemented with the TestGraf software to examine the effectiveness of each item (item characteristic curves and their options (option characteristic curves in discriminating between changes in the underliying disability level. We examined composite DIF to know whether women had a higher probability than men of endorsing each item. Results Item response analyses indicated that the twelve items forming the WHO-DAS II perform very well. All items were determined to provide good discrimination across varying standardized levels of the trait. The items also had option characteristic curves that showed good discrimination, given that each increasing option became more likely than the previous as a function of increasing trait level. No gender-related DIF was found on any of the items. Conclusions All WHO-DAS II items were very good at assessing overall disability. Our results supported the appropriateness of the weights assigned to response option categories and showed an absence of gender differences in item functioning.

Item Response Theory with Covariates (IRT-C): Assessing Item Recovery and Differential Item Functioning for the Three-Parameter Logistic Model

Science.gov (United States)

Tay, Louis; Huang, Qiming; Vermunt, Jeroen K.

2016-01-01

In large-scale testing, the use of multigroup approaches is limited for assessing differential item functioning (DIF) across multiple variables as DIF is examined for each variable separately. In contrast, the item response theory with covariate (IRT-C) procedure can be used to examine DIF across multiple variables (covariates) simultaneously. To…

High-cost users of hospital beds in Western Australia: a population-based record linkage study.

Science.gov (United States)

Calver, Janine; Brameld, Kate J; Preen, David B; Alexia, Stoney J; Boldy, Duncan P; McCaul, Kieran A

2006-04-17

To describe how high-cost users of inpatient care in Western Australia differ from other users in age, health problems and resource use. Secondary analysis of hospital data and linked mortality data from the WA Data Linkage System for 2002, with cost data from the National Hospital Cost Data Collection (2001-02 financial year). Comparison of high-cost users and other users of inpatient care in terms of age, health profile (major diagnostic category) and resource use (annualised costs, separations and bed days). Older high-cost users (> or = 65 years) were not more expensive to treat than younger high-cost users (at the patient level), but were costlier as a group overall because of their disproportionate representation (n = 8466; 55.9%). Chronic stable and unstable conditions were a key feature of high-cost users, and included end stage renal disease, angina, depression and secondary malignant neoplasms. High-cost users accounted for 38% of both inpatient costs and inpatient days, and 26% of inpatient separations. Ageing of the population is associated with an increase in the proportion of high-cost users of inpatient care. High costs appear to be needs-driven. Constraining high-cost inpatient use requires more focus on preventing the onset and progression of chronic disease, and reducing surgical complications and injuries in vulnerable groups.

RESEARCH ON ROBUST METHODS FOR EXTRACTING AND RECOGNIZING PHOTOGRAPHY MANAGEMENT ITEMS FROM VARIOUS IMAGE DATA Of CONSTRUCTION

Science.gov (United States)

Kitagawa, Etsuji; Tanaka, Shigenori; Abiko, Satoshi; Wakabayashi, Katsuma; Jiang, Wenyuan

Recently, an electronic delivery for various documents is carried out by Ministry of Land, Infrastructure, Transport and Tourism in construction fields. One of them is image data of construction photography that must be delivered with information of photography management items such as construction name or type of works, etc. However, there is a problem that a lot of cost is needed to treat contents of these items from characters printed and handwritten on blackboard into these image data. In this research, we develop the system which can treat contents of these items by extracting contents of these items from the image data of construction photography taken in various scenes with preprocessing the image, recognizing characters with OCR and correcting error with natural language process. And we confirm the effectiveness of the system, by experimenting in each function of system and in entire system.

The randomly renewed general item and the randomly inspected item with exponential life distribution

International Nuclear Information System (INIS)

Schneeweiss, W.G.

1979-01-01

For a randomly renewed item the probability distributions of the time to failure and of the duration of down time and the expectations of these random variables are determined. Moreover, it is shown that the same theory applies to randomly checked items with exponential probability distribution of life such as electronic items. The case of periodic renewals is treated as an example. (orig.) [de

P2-18: Temporal and Featural Separation of Memory Items Play Little Role for VSTM-Based Change Detection

Directory of Open Access Journals (Sweden)

Dae-Gyu Kim

2012-10-01

Full Text Available Classic studies of visual short-term memory (VSTM found that presenting memory items either sequentially or simultaneously does not affect recognition accuracy of the remembered items. Other studies also suggest that capacity of VSTM benefits from formation of bound object-based representations leading to no cost of remembering multi-feature items. According to these ideas, we aimed to examine the role of temporal and featural separation of memory items in VSTM change detection, (1 if sample items are separated across different temporal moments and (2 if across different feature dimensions. In a series of change detection experiments, we asked participants to report a change between a sample and a test display with a brief delay in between. In experiment 1, the sample items were split into two sets with a different onset time. In experiment 2, the sample items were split across two different feature dimensions (e.g., half color and half orientation. The change detection accuracy in Experiment 1 showed no substantial drop when the memory items were separated into two onset groups compared to simultaneous onset. The accuracy did not drop either when the features of sample items were split across two different feature groups compared to when were not split. The results indicate that temporal and featural separation of VWM items does not play a significant role for VSTM-based change detection.

Preliminary estimates of cost savings for defense high level waste vitrification options

International Nuclear Information System (INIS)

Merrill, R.A.; Chapman, C.C.

1993-09-01

The potential for realizing cost savings in the disposal of defense high-level waste through process and design modificatins has been considered. Proposed modifications range from simple changes in the canister design to development of an advanced melter capable of processing glass with a higher waste loading. Preliminary calculations estimate the total disposal cost (not including capital or operating costs) for defense high-level waste to be about $7.9 billion dollars for the reference conditions described in this paper, while projected savings resulting from the proposed process and design changes could reduce the disposal cost of defense high-level waste by up to $5.2 billion

Social cost of heavy drinking and alcohol dependence in high-income countries.

Science.gov (United States)

Mohapatra, Satya; Patra, Jayadeep; Popova, Svetlana; Duhig, Amy; Rehm, Jürgen

2010-06-01

A comprehensive review of cost drivers associated with alcohol abuse, heavy drinking, and alcohol dependence for high-income countries was conducted. The data from 14 identified cost studies were tabulated according to the potential direct and indirect cost drivers. The costs associated with alcohol abuse, alcohol dependence, and heavy drinking were calculated. The weighted average of the total societal cost due to alcohol abuse as percent gross domestic product (GDP)--purchasing power parity (PPP)--was 1.58%. The cost due to heavy drinking and/or alcohol dependence as percent GDP (PPP) was estimated to be 0.96%. On average, the alcohol-attributable indirect cost due to loss of productivity is more than the alcohol-attributable direct cost. Most of the countries seem to incur 1% or more of their GDP (PPP) as alcohol-attributable costs, which is a high toll for a single factor and an enormous burden on public health. The majority of alcohol-attributable costs incurred as a consequence of heavy drinking and/or alcohol dependence. Effective prevention and treatment measures should be implemented to reduce these costs.

[Cost effectiveness in treatment of acute myeloid leukemia].

Science.gov (United States)

Nordmann, P; Schaffner, A; Dazzi, H

2000-12-23

Although the rise in health costs is a widely debated issue, in Switzerland it was until recently taken for granted that patients are given the best available treatment regardless of cost. An example of a disease requiring costly treatment is acute myelogenous leukaemia (AML). To relate cost to benefit we calculated expenditure per life years gained. To assess costs we determined the real cost of treatment up to total remission, followed by consolidation or withdrawal of treatment or death. For survival time exceeding the 2-year observation period we used data from recent literature. The average cost of treatment ranges up to 107,592 Swiss francs (CHF). In 1997 we treated 23 leukaemia patients at Zurich University Hospital and gained a total of 210 life years. This represents an average cost of CHF 11,741 per life year gained. Chief cost items were therapy and personnel costs for nursing staff, followed by hotel business and personnel costs for doctors and diagnosis. Our results for AML treatment are far removed from the $61,500 ranging up to $166,000 discussed in the literature as the "critical" QALY (quality adjusted life years) value. This is the first time the actual costs of AML therapy have been shown for a Swiss cohort. Despite high initial treatment costs and success only in a limited number of patients, the expenditure per QALY is surprisingly low and shows clearly the effectiveness of apparently costly acute medicine.

Cost accounting of radiological examinations. Cost analysis of radiological examinations of intermediate referral hospitals and general practice.

Science.gov (United States)

Lääperi, A L

1996-01-01

The purpose of this study was to analyse the cost structure of radiological procedures in the intermediary referral hospitals and general practice and to develop a cost accounting system for radiological examinations that takes into consideration all relevant cost factors and is suitable for management of radiology departments and regional planning of radiological resources. The material comprised 174,560 basic radiological examinations performed in 1991 at 5 intermediate referral hospitals and 13 public health centres in the Pirkanmaa Hospital District in Finland. All radiological departments in the hospitals were managed by a specialist in radiology. The radiology departments at the public health care centres operated on a self-referral basis by general practitioners. The data were extracted from examination lists, inventories and balance sheets; parts of the data were estimated or calculated. The radiological examinations were compiled according to the type of examination and equipment used: conventional, contrast medium, ultrasound, mammography and roentgen examinations with mobile equipment. The majority of the examinations (87%) comprised conventional radiography. For cost analysis the cost items were grouped into 5 cost factors: personnel, equipment, material, real estate and administration costs. The depreciation time used was 10 years for roentgen equipment, 5 years for ultrasound equipment and 5 to 10 years for other capital goods. An annual interest rate of 10% was applied. Standard average values based on a sample at 2 hospitals were used for the examination-specific radiologist time, radiographer time and material costs. Four cost accounting versions with varying allocation of the major cost items were designed. Two-way analysis of variance of the effect of different allocation methods on the costs and cost structure of the examination groups was performed. On the basis of the cost analysis a cost accounting program containing both monetary and

Characteristics of highly rated leadership in nursing homes using item response theory.

Science.gov (United States)

Backman, Annica; Sjögren, Karin; Lindkvist, Marie; Lövheim, Hugo; Edvardsson, David

2017-12-01

To identify characteristics of highly rated leadership in nursing homes. An ageing population entails fundamental social, economic and organizational challenges for future aged care. Knowledge is limited of both specific leadership behaviours and organizational and managerial characteristics which have an impact on the leadership of contemporary nursing home care. Cross-sectional. From 290 municipalities, 60 were randomly selected and 35 agreed to participate, providing a sample of 3605 direct-care staff employed in 169 Swedish nursing homes. The staff assessed their managers' (n = 191) leadership behaviours using the Leadership Behaviour Questionnaire. Data were collected from November 2013 - September 2014, and the study was completed in November 2016. A two-parameter item response theory approach and regression analyses were used to identify specific characteristics of highly rated leadership. Five specific behaviours of highly rated nursing home leadership were identified; that the manager: experiments with new ideas; controls work closely; relies on subordinates; coaches and gives direct feedback; and handles conflicts constructively. The regression analyses revealed that managers with social work backgrounds and privately run homes were significantly associated with higher leadership ratings. This study highlights the five most important leadership behaviours that characterize those nursing home managers rated highest in terms of leadership. Managers in privately run nursing homes and managers with social work backgrounds were associated with higher leadership ratings. Further work is needed to explore these behaviours and factors predictive of higher leadership ratings. © 2017 John Wiley & Sons Ltd.

High Thermal Conductivity and High Wear Resistance Tool Steels for cost-effective Hot Stamping Tools

Science.gov (United States)

Valls, I.; Hamasaiid, A.; Padré, A.

2017-09-01

In hot stamping/press hardening, in addition to its shaping function, the tool controls the cycle time, the quality of the stamped components through determining the cooling rate of the stamped blank, the production costs and the feasibility frontier for stamping a given component. During the stamping, heat is extracted from the stamped blank and transported through the tool to the cooling medium in the cooling lines. Hence, the tools’ thermal properties determine the cooling rate of the blank, the heat transport mechanism, stamping times and temperature distribution. The tool’s surface resistance to adhesive and abrasive wear is also an important cost factor, as it determines the tool durability and maintenance costs. Wear is influenced by many tool material parameters, such as the microstructure, composition, hardness level and distribution of strengthening phases, as well as the tool’s working temperature. A decade ago, Rovalma developed a hot work tool steel for hot stamping that features a thermal conductivity of more than double that of any conventional hot work tool steel. Since that time, many complimentary grades have been developed in order to provide tailored material solutions as a function of the production volume, degree of blank cooling and wear resistance requirements, tool geometries, tool manufacturing method, type and thickness of the blank material, etc. Recently, Rovalma has developed a new generation of high thermal conductivity, high wear resistance tool steel grades that enable the manufacture of cost effective tools for hot stamping to increase process productivity and reduce tool manufacturing costs and lead times. Both of these novel grades feature high wear resistance and high thermal conductivity to enhance tool durability and cut cycle times in the production process of hot stamped components. Furthermore, one of these new grades reduces tool manufacturing costs through low tool material cost and hardening through readily

17 CFR 260.7a-16 - Inclusion of items, differentiation between items and answers, omission of instructions.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Inclusion of items, differentiation between items and answers, omission of instructions. 260.7a-16 Section 260.7a-16 Commodity and... INDENTURE ACT OF 1939 Formal Requirements § 260.7a-16 Inclusion of items, differentiation between items and...

Secondary Psychometric Examination of the Dimensional Obsessive-Compulsive Scale: Classical Testing, Item Response Theory, and Differential Item Functioning.

Science.gov (United States)

Thibodeau, Michel A; Leonard, Rachel C; Abramowitz, Jonathan S; Riemann, Bradley C

2015-12-01

The Dimensional Obsessive-Compulsive Scale (DOCS) is a promising measure of obsessive-compulsive disorder (OCD) symptoms but has received minimal psychometric attention. We evaluated the utility and reliability of DOCS scores. The study included 832 students and 300 patients with OCD. Confirmatory factor analysis supported the originally proposed four-factor structure. DOCS total and subscale scores exhibited good to excellent internal consistency in both samples (α = .82 to α = .96). Patient DOCS total scores reduced substantially during treatment (t = 16.01, d = 1.02). DOCS total scores discriminated between students and patients (sensitivity = 0.76, 1 - specificity = 0.23). The measure did not exhibit gender-based differential item functioning as tested by Mantel-Haenszel chi-square tests. Expected response options for each item were plotted as a function of item response theory and demonstrated that DOCS scores incrementally discriminate OCD symptoms ranging from low to extremely high severity. Incremental differences in DOCS scores appear to represent unbiased and reliable differences in true OCD symptom severity. © The Author(s) 2014.

The cost-effectiveness and cost-utility of high-dose palliative radiotherapy for advanced non-small-cell lung cancer

International Nuclear Information System (INIS)

Coy, Peter; Schaafsma, Joseph; Schofield, John A.

2000-01-01

Purpose: To compute cost-effectiveness/cost-utility (CE/CU) ratios, from the treatment clinic and societal perspectives, for high-dose palliative radiotherapy treatment (RT) for advanced non-small-cell lung cancer (NSCLC) against best supportive care (BSC) as comparator, and thereby demonstrate a method for computing CE/CU ratios when randomized clinical trial (RCT) data cannot be generated. Methods and Materials: Unit cost estimates based on an earlier reported 1989-90 analysis of treatment costs at the Vancouver Island Cancer Centre, Victoria, British Columbia, Canada, are updated to 1997-1998 and then used to compute the incremental cost of an average dose of high-dose palliative RT. The incremental number of life days and quality-adjusted life days (QALDs) attributable to treatment are from earlier reported regression analyses of the survival and quality-of-life data from patients who enrolled prospectively in a lung cancer management cost-effectiveness study at the clinic over a 2-year period from 1990 to 1992. Results: The baseline CE and CU ratios are $9245 Cdn per life year (LY) and $12,836 per quality-adjusted life year (QALY), respectively, from the clinic perspective; and $12,253/LY and $17,012/QALY, respectively, from the societal perspective. Multivariate sensitivity analysis for the CE ratio produces a range of $5513-28,270/LY from the clinic perspective, and $7307-37,465/LY from the societal perspective. Similar calculations for the CU ratio produce a range of $7205-37,134/QALY from the clinic perspective, and $9550-49,213/QALY from the societal perspective. Conclusion: The cost effectiveness and cost utility of high-dose palliative RT for advanced NSCLC compares favorably with the cost effectiveness of other forms of treatment for NSCLC, of treatments of other forms of cancer, and of many other commonly used medical interventions; and lies within the US $50,000/QALY benchmark often cited for cost-effective care

Improving Measurement Efficiency of the Inner EAR Scale with Item Response Theory.

Science.gov (United States)

Jessen, Annika; Ho, Andrew D; Corrales, C Eduardo; Yueh, Bevan; Shin, Jennifer J

2018-02-01

Objectives (1) To assess the 11-item Inner Effectiveness of Auditory Rehabilitation (Inner EAR) instrument with item response theory (IRT). (2) To determine whether the underlying latent ability could also be accurately represented by a subset of the items for use in high-volume clinical scenarios. (3) To determine whether the Inner EAR instrument correlates with pure tone thresholds and word recognition scores. Design IRT evaluation of prospective cohort data. Setting Tertiary care academic ambulatory otolaryngology clinic. Subjects and Methods Modern psychometric methods, including factor analysis and IRT, were used to assess unidimensionality and item properties. Regression methods were used to assess prediction of word recognition and pure tone audiometry scores. Results The Inner EAR scale is unidimensional, and items varied in their location and information. Information parameter estimates ranged from 1.63 to 4.52, with higher values indicating more useful items. The IRT model provided a basis for identifying 2 sets of items with relatively lower information parameters. Item information functions demonstrated which items added insubstantial value over and above other items and were removed in stages, creating a 8- and 3-item Inner EAR scale for more efficient assessment. The 8-item version accurately reflected the underlying construct. All versions correlated moderately with word recognition scores and pure tone averages. Conclusion The 11-, 8-, and 3-item versions of the Inner EAR scale have strong psychometric properties, and there is correlational validity evidence for the observed scores. Modern psychometric methods can help streamline care delivery by maximizing relevant information per item administered.

Cost-Effectiveness Analysis in Practice: Interventions to Improve High School Completion

Science.gov (United States)

Hollands, Fiona; Bowden, A. Brooks; Belfield, Clive; Levin, Henry M.; Cheng, Henan; Shand, Robert; Pan, Yilin; Hanisch-Cerda, Barbara

2014-01-01

In this article, we perform cost-effectiveness analysis on interventions that improve the rate of high school completion. Using the What Works Clearinghouse to select effective interventions, we calculate cost-effectiveness ratios for five youth interventions. We document wide variation in cost-effectiveness ratios between programs and between…

Cost calculation and financial measures for high-level waste disposal business

International Nuclear Information System (INIS)

Sekiguchi, Hiromasa.

1987-01-01

A study is made on the costs for disposal of high-level wastes, centering on financial problems involving cost calculation for disposal business and methods and systems for funding the business. The first half of the report is focused on calculation of costs for disposal business. Basic equations are shown to calculate the total costs required for a disposal plant and the costs for disposal of one unit of high-level wastes. A model is proposed to calculate the charges to be paid by electric power companies to the plant for disposal of their wastes. Another equation is derived to calculate the disposal charge per kWh of power generation in a power plant. The second half of the report is focused on financial measures concerning expenses for disposal. A financial basis should be established for the implementation of high-level waste disposal. It is insisted that a reasonable method for estimating the disposal costs should be set up and it should be decided who will pay the expenses. Discussions are made on some methods and systems for funding the disposal business. An additional charge should be included in the electricity bill to be paid by electric power users, or it should be included in tax. (Nogami, K.)

Sliver Solar Cells: High-Efficiency, Low-Cost PV Technology

Directory of Open Access Journals (Sweden)

Evan Franklin

2007-01-01

Full Text Available Sliver cells are thin, single-crystal silicon solar cells fabricated using standard fabrication technology. Sliver modules, composed of several thousand individual Sliver cells, can be efficient, low-cost, bifacial, transparent, flexible, shadow tolerant, and lightweight. Compared with current PV technology, mature Sliver technology will need 10% of the pure silicon and fewer than 5% of the wafer starts per MW of factory output. This paper deals with two distinct challenges related to Sliver cell and Sliver module production: providing a mature and robust Sliver cell fabrication method which produces a high yield of highly efficient Sliver cells, and which is suitable for transfer to industry; and, handling, electrically interconnecting, and encapsulating billions of sliver cells at low cost. Sliver cells with efficiencies of 20% have been fabricated at ANU using a reliable, optimised processing sequence, while low-cost encapsulation methods have been demonstrated using a submodule technique.

The Effects of Test Length and Sample Size on Item Parameters in Item Response Theory

Science.gov (United States)

Sahin, Alper; Anil, Duygu

2017-01-01

This study investigates the effects of sample size and test length on item-parameter estimation in test development utilizing three unidimensional dichotomous models of item response theory (IRT). For this purpose, a real language test comprised of 50 items was administered to 6,288 students. Data from this test was used to obtain data sets of…

Scalable Light Module for Low-Cost, High-Efficiency Light- Emitting Diode Luminaires

Energy Technology Data Exchange (ETDEWEB)

Tarsa, Eric [Cree, Inc., Goleta, CA (United States)

2015-08-31

During this two-year program Cree developed a scalable, modular optical architecture for low-cost, high-efficacy light emitting diode (LED) luminaires. Stated simply, the goal of this architecture was to efficiently and cost-effectively convey light from LEDs (point sources) to broad luminaire surfaces (area sources). By simultaneously developing warm-white LED components and low-cost, scalable optical elements, a high system optical efficiency resulted. To meet program goals, Cree evaluated novel approaches to improve LED component efficacy at high color quality while not sacrificing LED optical efficiency relative to conventional packages. Meanwhile, efficiently coupling light from LEDs into modular optical elements, followed by optimally distributing and extracting this light, were challenges that were addressed via novel optical design coupled with frequent experimental evaluations. Minimizing luminaire bill of materials and assembly costs were two guiding principles for all design work, in the effort to achieve luminaires with significantly lower normalized cost ($/klm) than existing LED fixtures. Chief project accomplishments included the achievement of >150 lm/W warm-white LEDs having primary optics compatible with low-cost modular optical elements. In addition, a prototype Light Module optical efficiency of over 90% was measured, demonstrating the potential of this scalable architecture for ultra-high-efficacy LED luminaires. Since the project ended, Cree has continued to evaluate optical element fabrication and assembly methods in an effort to rapidly transfer this scalable, cost-effective technology to Cree production development groups. The Light Module concept is likely to make a strong contribution to the development of new cost-effective, high-efficacy luminaries, thereby accelerating widespread adoption of energy-saving SSL in the U.S.

Decommissioning costs of WWER-440 nuclear power plants. Interim report: Data collection and preliminary evaluations

International Nuclear Information System (INIS)

2002-11-01

Based on the interest in decommissioning costs within Member States, especially in WWER- 440 operating countries that face the complex decision about continued operation vs. decommissioning in the near future, the IAEA launched the task to prepare a technical document on decommissioning costs of WWER-440 nuclear power plants. The main objectives of this publication were to present the decommissioning costs of WWER-440 NPPs in a uniform manner, i.e. using the cost item and cost group system of the Interim Technical Document on Nuclear Decommissioning 'A Proposed Standardised List of Items for Costing Purposes' developed jointly by the EC, the IAEA and the OECD Nuclear Energy Agency (NEA), and providing, as such, a basis for understanding decommissioning costs differences. Member States operating WWER-440 NPPs or having such units under shutdown or even under decommissioning conditions have been requested to provide cost estimates and other input data in order to facilitate understanding of their cost figures. Both decommissioning options, i.e. immediate decommissioning and safe enclosure, have been considered. In the aforementioned joint Interim Technical Document, cost items related to activities that are carried out with a similar emphasis, whether or not tied to a similar time schedule for decommissioning, or that are based on overall activities that cannot be categorised in a specific time period, are grouped as follows: pre-decommissioning actions; facility shutdown activities; procurement of general equipment and material; dismantling activities; waste processing, storage and disposal; site security, surveillance and maintenance; site restoration, cleanup and landscaping; project management, engineering and site support; research and development; fuel and nuclear material; other costs. Before starting implementation of the study, agreement was obtained on general financial, technical and social boundary conditions that should be used in order to facilitate

Which Statistic Should Be Used to Detect Item Preknowledge When the Set of Compromised Items Is Known?

Science.gov (United States)

Sinharay, Sandip

2017-09-01

Benefiting from item preknowledge is a major type of fraudulent behavior during educational assessments. Belov suggested the posterior shift statistic for detection of item preknowledge and showed its performance to be better on average than that of seven other statistics for detection of item preknowledge for a known set of compromised items. Sinharay suggested a statistic based on the likelihood ratio test for detection of item preknowledge; the advantage of the statistic is that its null distribution is known. Results from simulated and real data and adaptive and nonadaptive tests are used to demonstrate that the Type I error rate and power of the statistic based on the likelihood ratio test are very similar to those of the posterior shift statistic. Thus, the statistic based on the likelihood ratio test appears promising in detecting item preknowledge when the set of compromised items is known.

An emotional functioning item bank of 24 items for computerized adaptive testing (CAT) was established

DEFF Research Database (Denmark)

Petersen, Morten Aa.; Gamper, Eva-Maria; Costantini, Anna

2016-01-01

of the widely used EORTC Quality of Life questionnaire (QLQ-C30). STUDY DESIGN AND SETTING: On the basis of literature search and evaluations by international samples of experts and cancer patients, 38 candidate items were developed. The psychometric properties of the items were evaluated in a large...... international sample of cancer patients. This included evaluations of dimensionality, item response theory (IRT) model fit, differential item functioning (DIF), and of measurement precision/statistical power. RESULTS: Responses were obtained from 1,023 cancer patients from four countries. The evaluations showed...... that 24 items could be included in a unidimensional IRT model. DIF did not seem to have any significant impact on the estimation of EF. Evaluations indicated that the CAT measure may reduce sample size requirements by up to 50% compared to the QLQ-C30 EF scale without reducing power. CONCLUSION...

Factoring handedness data: I. Item analysis.

Science.gov (United States)

Messinger, H B; Messinger, M I

1995-12-01

Recently in this journal Peters and Murphy challenged the validity of factor analyses done on bimodal handedness data, suggesting instead that right- and left-handers be studied separately. But bimodality may be avoidable if attention is paid to Oldfield's questionnaire format and instructions for the subjects. Two characteristics appear crucial: a two-column LEFT-RIGHT format for the body of the instrument and what we call Oldfield's Admonition: not to indicate strong preference for handedness item, such as write, unless "... the preference is so strong that you would never try to use the other hand unless absolutely forced to...". Attaining unimodality of an item distribution would seem to overcome the objections of Peters and Murphy. In a 1984 survey in Boston we used Oldfield's ten-item questionnaire exactly as published. This produced unimodal item distributions. With reflection of the five-point item scale and a logarithmic transformation, we achieved a degree of normalization for the items. Two surveys elsewhere based on Oldfield's 20-item list but with changes in the questionnaire format and the instructions, yielded markedly different item distributions with peaks at each extreme and sometimes in the middle as well.

Trends in Sodium Content of Menu Items in Large Chain Restaurants in the U.S.

Science.gov (United States)

Wolfson, Julia A; Moran, Alyssa J; Jarlenski, Marian P; Bleich, Sara N

2018-01-01

Consuming too much sodium is associated with increased risk for cardiovascular disease, and restaurant foods are a primary source of sodium. This study assessed recent trends in sodium content of menu items in U.S. chain restaurants. Data from 21,557 menu items in 66 top-earning chain restaurants available from 2012 to 2016 were obtained from the MenuStat project and analyzed in 2017. Generalized linear models were used to examine changes in calorie-adjusted, per-item sodium content of menu items offered in all years (2012-2016) and items offered in 2012 only compared with items newly introduced in 2013, 2014, 2015, and 2016. Overall, calorie-adjusted sodium content in newly introduced menu items declined by 104 mg from 2012 to 2016 (prestaurant type; sodium content, particularly for main course items, was high. Sodium declined by 83 mg in fast food restaurants, 19 mg in fast casual restaurants, and 163 mg in full service restaurants. Sodium in appetizer and side items newly introduced in 2016 increased by 266 mg compared with items on the menu in 2012 only (prestaurants. However, sodium content of core and new menu items remain high, and reductions are inconsistent across menu categories and restaurant types. Copyright © 2018 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Pop-out and pop-in: Visual working memory advantages for unique items.

Science.gov (United States)

Rajsic, Jason; Sun, Sol Z; Huxtable, Lauren; Pratt, Jay; Ferber, Susanne

2016-12-01

Attentional control is thought to play a critical role in determining the amount of information that can be stored and retrieved from visual working memory (VWM). We tested whether and how task-irrelevant feature-based salience, known to affect the control of visual attention, affects VWM performance. Our results show that features of a task-irrelevant color singleton are more likely to be recalled from VWM than non-singleton items and that this increased memorability comes at a cost to the other items in the display. Furthermore, the singleton effect in VWM was negatively correlated with an individual's baseline VWM capacity. Taken together, these results suggest that individual differences in VWM storage capacity may be partially attributable to the ability to ignore differences in task-irrelevant physical salience.

Patents associated with high-cost drugs in Australia.

Directory of Open Access Journals (Sweden)

Andrew F Christie

Full Text Available Australia, like most countries, faces high and rapidly-rising drug costs. There are longstanding concerns about pharmaceutical companies inappropriately extending their monopoly position by "evergreening" blockbuster drugs, through misuse of the patent system. There is, however, very little empirical information about this behaviour. We fill the gap by analysing all of the patents associated with 15 of the costliest drugs in Australia over the last 20 years. Specifically, we search the patent register to identify all the granted patents that cover the active pharmaceutical ingredient of the high-cost drugs. Then, we classify the patents by type, and identify their owners. We find a mean of 49 patents associated with each drug. Three-quarters of these patents are owned by companies other than the drug's originator. Surprisingly, the majority of all patents are owned by companies that do not have a record of developing top-selling drugs. Our findings show that a multitude of players seek monopoly control over innovations to blockbuster drugs. Consequently, attempts to control drug costs by mitigating misuse of the patent system are likely to miss the mark if they focus only on the patenting activities of originators.

Patents associated with high-cost drugs in Australia.

Science.gov (United States)

Christie, Andrew F; Dent, Chris; McIntyre, Peter; Wilson, Lachlan; Studdert, David M

2013-01-01

Australia, like most countries, faces high and rapidly-rising drug costs. There are longstanding concerns about pharmaceutical companies inappropriately extending their monopoly position by "evergreening" blockbuster drugs, through misuse of the patent system. There is, however, very little empirical information about this behaviour. We fill the gap by analysing all of the patents associated with 15 of the costliest drugs in Australia over the last 20 years. Specifically, we search the patent register to identify all the granted patents that cover the active pharmaceutical ingredient of the high-cost drugs. Then, we classify the patents by type, and identify their owners. We find a mean of 49 patents associated with each drug. Three-quarters of these patents are owned by companies other than the drug's originator. Surprisingly, the majority of all patents are owned by companies that do not have a record of developing top-selling drugs. Our findings show that a multitude of players seek monopoly control over innovations to blockbuster drugs. Consequently, attempts to control drug costs by mitigating misuse of the patent system are likely to miss the mark if they focus only on the patenting activities of originators.

Item Modeling Concept Based on Multimedia Authoring

Directory of Open Access Journals (Sweden)

Janez Stergar

2008-09-01

Full Text Available In this paper a modern item design framework for computer based assessment based on Flash authoring environment will be introduced. Question design will be discussed as well as the multimedia authoring environment used for item modeling emphasized. Item type templates are a structured means of collecting and storing item information that can be used to improve the efficiency and security of the innovative item design process. Templates can modernize the item design, enhance and speed up the development process. Along with content creation, multimedia has vast potential for use in innovative testing. The introduced item design template is based on taxonomy of innovative items which have great potential for expanding the content areas and construct coverage of an assessment. The presented item design approach is based on GUI's – one for question design based on implemented item design templates and one for user interaction tracking/retrieval. The concept of user interfaces based on Flash technology will be discussed as well as implementation of the innovative approach of the item design forms with multimedia authoring. Also an innovative method for user interaction storage/retrieval based on PHP extending Flash capabilities in the proposed framework will be introduced.

The medial temporal lobes distinguish between within-item and item-context relations during autobiographical memory retrieval.

Science.gov (United States)

Sheldon, Signy; Levine, Brian

2015-12-01

During autobiographical memory retrieval, the medial temporal lobes (MTL) relate together multiple event elements, including object (within-item relations) and context (item-context relations) information, to create a cohesive memory. There is consistent support for a functional specialization within the MTL according to these relational processes, much of which comes from recognition memory experiments. In this study, we compared brain activation patterns associated with retrieving within-item relations (i.e., associating conceptual and sensory-perceptual object features) and item-context relations (i.e., spatial relations among objects) with respect to naturalistic autobiographical retrieval. We developed a novel paradigm that cued participants to retrieve information about past autobiographical events, non-episodic within-item relations, and non-episodic item-context relations with the perceptuomotor aspects of retrieval equated across these conditions. We used multivariate analysis techniques to extract common and distinct patterns of activity among these conditions within the MTL and across the whole brain, both in terms of spatial and temporal patterns of activity. The anterior MTL (perirhinal cortex and anterior hippocampus) was preferentially recruited for generating within-item relations later in retrieval whereas the posterior MTL (posterior parahippocampal cortex and posterior hippocampus) was preferentially recruited for generating item-context relations across the retrieval phase. These findings provide novel evidence for functional specialization within the MTL with respect to naturalistic memory retrieval. © 2015 Wiley Periodicals, Inc.

Differential item functioning of the patient-reported outcomes information system (PROMIS®) pain interference item bank by language (Spanish versus English).

Science.gov (United States)

Paz, Sylvia H; Spritzer, Karen L; Reise, Steven P; Hays, Ron D

2017-06-01

About 70% of Latinos, 5 years old or older, in the United States speak Spanish at home. Measurement equivalence of the PROMIS ® pain interference (PI) item bank by language of administration (English versus Spanish) has not been evaluated. A sample of 527 adult Spanish-speaking Latinos completed the Spanish version of the 41-item PROMIS ® pain interference item bank. We evaluate dimensionality, monotonicity and local independence of the Spanish-language items. Then we evaluate differential item functioning (DIF) using ordinal logistic regression with item response theory scores estimated from DIF-free "anchor" items. One of the 41 items in the Spanish version of the PROMIS ® PI item bank was identified as having significant uniform DIF. English- and Spanish-speaking subjects with the same level of pain interference responded differently to 1 of the 41 items in the PROMIS ® PI item bank. This item was not retained due to proprietary issues. The original English language item parameters can be used when estimating PROMIS ® PI scores.

Ultra High Brightness/Low Cost Fiber Coupled Packaging, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — High peak power, high efficiency, high reliability lightweight, low cost QCW laser diode pump modules with up to 1000W of QCW output become possible with nLight's...

An introduction to Item Response Theory and Rasch Analysis of the Eating Assessment Tool (EAT-10).

Science.gov (United States)

Kean, Jacob; Brodke, Darrel S; Biber, Joshua; Gross, Paul

2018-03-01

Item response theory has its origins in educational measurement and is now commonly applied in health-related measurement of latent traits, such as function and symptoms. This application is due in large part to gains in the precision of measurement attributable to item response theory and corresponding decreases in response burden, study costs, and study duration. The purpose of this paper is twofold: introduce basic concepts of item response theory and demonstrate this analytic approach in a worked example, a Rasch model (1PL) analysis of the Eating Assessment Tool (EAT-10), a commonly used measure for oropharyngeal dysphagia. The results of the analysis were largely concordant with previous studies of the EAT-10 and illustrate for brain impairment clinicians and researchers how IRT analysis can yield greater precision of measurement.

A strategy for optimizing item-pool management

NARCIS (Netherlands)

Ariel, A.; van der Linden, Willem J.; Veldkamp, Bernard P.

2006-01-01

Item-pool management requires a balancing act between the input of new items into the pool and the output of tests assembled from it. A strategy for optimizing item-pool management is presented that is based on the idea of a periodic update of an optimal blueprint for the item pool to tune item

The high cost of low-acuity ICU outliers.

Science.gov (United States)

Dahl, Deborah; Wojtal, Greg G; Breslow, Michael J; Holl, Randy; Huguez, Debra; Stone, David; Korpi, Gloria

2012-01-01

Direct variable costs were determined on each hospital day for all patients with an intensive care unit (ICU) stay in four Phoenix-area hospital ICUs. Average daily direct variable cost in the four ICUs ranged from $1,436 to $1,759 and represented 69.4 percent and 45.7 percent of total hospital stay cost for medical and surgical patients, respectively. Daily ICU cost and length of stay (LOS) were higher in patients with higher ICU admission acuity of illness as measured by the APACHE risk prediction methodology; 16.2 percent of patients had an ICU stay in excess of six days, and these LOS outliers accounted for 56.7 percent of total ICU cost. While higher-acuity patients were more likely to be ICU LOS outliers, 11.1 percent of low-risk patients were outliers. The low-risk group included 69.4 percent of the ICU population and accounted for 47 percent of all LOS outliers. Low-risk LOS outliers accounted for 25.3 percent of ICU cost and incurred fivefold higher hospital stay costs and mortality rates. These data suggest that severity of illness is an important determinant of daily resource consumption and LOS, regardless of whether the patient arrives in the ICU with high acuity or develops complications that increase acuity. The finding that a substantial number of long-stay patients come into the ICU with low acuity and deteriorate after ICU admission is not widely recognized and represents an important opportunity to improve patient outcomes and lower costs. ICUs should consider adding low-risk LOS data to their quality and financial performance reports.

A Polytomous Item Response Theory Analysis of Social Physique Anxiety Scale

Science.gov (United States)

Fletcher, Richard B.; Crocker, Peter

2014-01-01

The present study investigated the social physique anxiety scale's factor structure and item properties using confirmatory factor analysis and item response theory. An additional aim was to identify differences in response patterns between groups (gender). A large sample of high school students aged 11-15 years (N = 1,529) consisting of n =…

Life cycle costing of waste management systems: Overview, calculation principles and case studies

International Nuclear Information System (INIS)

Martinez-Sanchez, Veronica; Kromann, Mikkel A.; Astrup, Thomas Fruergaard

2015-01-01

Highlights: • We propose a comprehensive model for cost assessment of waste management systems. • The model includes three types of LCC: Conventional, Environmental and Societal LCCs. • The applicability of the proposed model is tested with two case studies. - Abstract: This paper provides a detailed and comprehensive cost model for the economic assessment of solid waste management systems. The model was based on the principles of Life Cycle Costing (LCC) and followed a bottom-up calculation approach providing detailed cost items for all key technologies within modern waste systems. All technologies were defined per tonne of waste input, and each cost item within a technology was characterised by both a technical and an economic parameter (for example amount and cost of fuel related to waste collection), to ensure transparency, applicability and reproducibility. Cost items were classified as: (1) budget costs, (2) transfers (for example taxes, subsidies and fees) and (3) externality costs (for example damage or abatement costs related to emissions and disamenities). Technology costs were obtained as the sum of all cost items (of the same type) within a specific technology, while scenario costs were the sum of all technologies involved in a scenario. The cost model allows for the completion of three types of LCC: a Conventional LCC, for the assessment of financial costs, an Environmental LCC, for the assessment of financial costs whose results are complemented by a Life Cycle Assessment (LCA) for the same system, and a Societal LCC, for socio-economic assessments. Conventional and Environmental LCCs includes budget costs and transfers, while Societal LCCs includes budget and externality costs. Critical aspects were found in the existing literature regarding the cost assessment of waste management, namely system boundary equivalency, accounting for temporally distributed emissions and impacts, inclusions of transfers, the internalisation of environmental

Life cycle costing of waste management systems: Overview, calculation principles and case studies

Energy Technology Data Exchange (ETDEWEB)

Martinez-Sanchez, Veronica, E-mail: vems@env.dtu.dk [Technical University of Denmark, Department of Environmental Engineering, Miljoevej, Building 113, 2800 Kgs. Lyngby (Denmark); Kromann, Mikkel A. [COWI A/S, Parallelvej 2, 2800 Kgs. Lyngby (Denmark); Astrup, Thomas Fruergaard [Technical University of Denmark, Department of Environmental Engineering, Miljoevej, Building 113, 2800 Kgs. Lyngby (Denmark)

2015-02-15

Highlights: • We propose a comprehensive model for cost assessment of waste management systems. • The model includes three types of LCC: Conventional, Environmental and Societal LCCs. • The applicability of the proposed model is tested with two case studies. - Abstract: This paper provides a detailed and comprehensive cost model for the economic assessment of solid waste management systems. The model was based on the principles of Life Cycle Costing (LCC) and followed a bottom-up calculation approach providing detailed cost items for all key technologies within modern waste systems. All technologies were defined per tonne of waste input, and each cost item within a technology was characterised by both a technical and an economic parameter (for example amount and cost of fuel related to waste collection), to ensure transparency, applicability and reproducibility. Cost items were classified as: (1) budget costs, (2) transfers (for example taxes, subsidies and fees) and (3) externality costs (for example damage or abatement costs related to emissions and disamenities). Technology costs were obtained as the sum of all cost items (of the same type) within a specific technology, while scenario costs were the sum of all technologies involved in a scenario. The cost model allows for the completion of three types of LCC: a Conventional LCC, for the assessment of financial costs, an Environmental LCC, for the assessment of financial costs whose results are complemented by a Life Cycle Assessment (LCA) for the same system, and a Societal LCC, for socio-economic assessments. Conventional and Environmental LCCs includes budget costs and transfers, while Societal LCCs includes budget and externality costs. Critical aspects were found in the existing literature regarding the cost assessment of waste management, namely system boundary equivalency, accounting for temporally distributed emissions and impacts, inclusions of transfers, the internalisation of environmental

New technologies for item monitoring

Energy Technology Data Exchange (ETDEWEB)

Abbott, J.A. [EG & G Energy Measurements, Albuquerque, NM (United States); Waddoups, I.G. [Sandia National Labs., Albuquerque, NM (United States)

1993-12-01

This report responds to the Department of Energy`s request that Sandia National Laboratories compare existing technologies against several advanced technologies as they apply to DOE needs to monitor the movement of material, weapons, or personnel for safety and security programs. The authors describe several material control systems, discuss their technologies, suggest possible applications, discuss assets and limitations, and project costs for each system. The following systems are described: WATCH system (Wireless Alarm Transmission of Container Handling); Tag system (an electrostatic proximity sensor); PANTRAK system (Personnel And Material Tracking); VRIS (Vault Remote Inventory System); VSIS (Vault Safety and Inventory System); AIMS (Authenticated Item Monitoring System); EIVS (Experimental Inventory Verification System); Metrox system (canister monitoring system); TCATS (Target Cueing And Tracking System); LGVSS (Light Grid Vault Surveillance System); CSS (Container Safeguards System); SAMMS (Security Alarm and Material Monitoring System); FOIDS (Fiber Optic Intelligence & Detection System); GRADS (Graded Radiation Detection System); and PINPAL (Physical Inventory Pallet).

New technologies for item monitoring

International Nuclear Information System (INIS)

Abbott, J.A.; Waddoups, I.G.

1993-12-01

This report responds to the Department of Energy's request that Sandia National Laboratories compare existing technologies against several advanced technologies as they apply to DOE needs to monitor the movement of material, weapons, or personnel for safety and security programs. The authors describe several material control systems, discuss their technologies, suggest possible applications, discuss assets and limitations, and project costs for each system. The following systems are described: WATCH system (Wireless Alarm Transmission of Container Handling); Tag system (an electrostatic proximity sensor); PANTRAK system (Personnel And Material Tracking); VRIS (Vault Remote Inventory System); VSIS (Vault Safety and Inventory System); AIMS (Authenticated Item Monitoring System); EIVS (Experimental Inventory Verification System); Metrox system (canister monitoring system); TCATS (Target Cueing And Tracking System); LGVSS (Light Grid Vault Surveillance System); CSS (Container Safeguards System); SAMMS (Security Alarm and Material Monitoring System); FOIDS (Fiber Optic Intelligence ampersand Detection System); GRADS (Graded Radiation Detection System); and PINPAL (Physical Inventory Pallet)

Item response theory - A first approach

Science.gov (United States)

Nunes, Sandra; Oliveira, Teresa; Oliveira, Amílcar

2017-07-01

The Item Response Theory (IRT) has become one of the most popular scoring frameworks for measurement data, frequently used in computerized adaptive testing, cognitively diagnostic assessment and test equating. According to Andrade et al. (2000), IRT can be defined as a set of mathematical models (Item Response Models - IRM) constructed to represent the probability of an individual giving the right answer to an item of a particular test. The number of Item Responsible Models available to measurement analysis has increased considerably in the last fifteen years due to increasing computer power and due to a demand for accuracy and more meaningful inferences grounded in complex data. The developments in modeling with Item Response Theory were related with developments in estimation theory, most remarkably Bayesian estimation with Markov chain Monte Carlo algorithms (Patz & Junker, 1999). The popularity of Item Response Theory has also implied numerous overviews in books and journals, and many connections between IRT and other statistical estimation procedures, such as factor analysis and structural equation modeling, have been made repeatedly (Van der Lindem & Hambleton, 1997). As stated before the Item Response Theory covers a variety of measurement models, ranging from basic one-dimensional models for dichotomously and polytomously scored items and their multidimensional analogues to models that incorporate information about cognitive sub-processes which influence the overall item response process. The aim of this work is to introduce the main concepts associated with one-dimensional models of Item Response Theory, to specify the logistic models with one, two and three parameters, to discuss some properties of these models and to present the main estimation procedures.

Passive ultra high frequency radio frequency identification systems for single-item identification in food supply chains

Directory of Open Access Journals (Sweden)

Paolo Barge

2017-02-01

Full Text Available In the food industry, composition, size, and shape of items are much less regular than in other commodities sectors. In addition, a wide variety of packaging, composed by different materials, is employed. As material, size and shape of items to which the tag should be attached strongly influence the minimum power requested for tag functioning, performance improvements can be achieved only selecting suitable radio frequency (RF identifiers for the specific combination of food product and packaging. When dealing with logistics units, the dynamic reading of a vast number of tags could originate simultaneous broadcasting of signals (tag-to-tag collisions that could affect reading rates and the overall reliability of the identification procedure. This paper reports the results of an analysis of the reading performance of ultra high frequency radio frequency identification systems for multiple static and dynamic electronic identification of food packed products in controlled conditions. Products were considered when arranged on a logistics pallet. The effects on reading rate of different factors, among which the product type, the gate configuration, the field polarisation, the power output of the RF reader, the interrogation protocol configuration as well as the transit speed, the number of tags and their interactions were statistically analysed and compared.

Safeguard Application Options for the Laser-Based Item Monitoring System (LBIMS)

International Nuclear Information System (INIS)

Laughter, Mark D

2008-01-01

Researchers at Oak Ridge National Laboratory (ORNL) are developing a Laser-Based Item Monitoring System (LBIMS) for advanced safeguards at nuclear facilities. LBIMS uses a low-power laser transceiver to monitor the presence and position of items with retroreflective tags. The primary advantages of LBIMS are its scalability to continuously monitor a wide range of items, its ability to operate unattended, its low cost of implementation, and its inherent information security due to its line-of-sight and non-broadcasting operation. The primary proposed safeguard application of LBIMS is described in its name: item monitoring. LBIMS could be implemented in a storage area to continuously monitor containers of nuclear material and the area in which they are stored. The system could be configured to provide off-site notification if any of the containers are moved or removed or if the area is accessed. Individual tags would be used to monitor storage containers, and additional tags could be used to record information regarding secondary storage units and room access. The capability to register small changes in tag position opens up the possibility of several other uses. These include continuously monitoring piping arrangements for design information verification or recording equipment positions for other safeguards systems, such as tracking the opening and closing of autoclaves as part of a cylinder tracking system or opening and closing valves on a sample or product take-off line. Combined with attribute tags, which transmit information from any kind of sensor by modulating the laser signal, LBIMS provides the capability to wirelessly and securely collect safeguards data, even in areas where radio-frequency or other wireless communication methods are not practicable. Four application types are described in this report: static item monitoring, in-process item monitoring with trigger tags, multi-layered integration with trigger tags, and line-of-sight data transfer with

Training Physicians to Provide High-Value, Cost-Conscious Care A Systematic Review

NARCIS (Netherlands)

Stammen, L.A.; Stalmeijer, R.E.; Paternotte, E.; Pool, A.O.; Driessen, E.W.; Scheele, F.; Stassen, L.P.S.

2015-01-01

Importance Increasing health care expenditures are taxing the sustainability of the health care system. Physicians should be prepared to deliver high-value, cost-conscious care. Objective To understand the circumstances in which the delivery of high-value, cost-conscious care is learned, with a goal

Investigating Separate and Concurrent Approaches for Item Parameter Drift in 3PL Item Response Theory Equating

Science.gov (United States)

Arce-Ferrer, Alvaro J.; Bulut, Okan

2017-01-01

This study examines separate and concurrent approaches to combine the detection of item parameter drift (IPD) and the estimation of scale transformation coefficients in the context of the common item nonequivalent groups design with the three-parameter item response theory equating. The study uses real and synthetic data sets to compare the two…

High Efficiency, Low Cost Scintillators for PET

International Nuclear Information System (INIS)

Kanai Shah

2007-01-01

Inorganic scintillation detectors coupled to PMTs are an important element of medical imaging applications such as positron emission tomography (PET). Performance as well as cost of these systems is limited by the properties of the scintillation detectors available at present. The Phase I project was aimed at demonstrating the feasibility of producing high performance scintillators using a low cost fabrication approach. Samples of these scintillators were produced and their performance was evaluated. Overall, the Phase I effort was very successful. The Phase II project will be aimed at advancing the new scintillation technology for PET. Large samples of the new scintillators will be produced and their performance will be evaluated. PET modules based on the new scintillators will also be built and characterized

A Model of Batch Scheduling for a Single Batch Processor with Additional Setups to Minimize Total Inventory Holding Cost of Parts of a Single Item Requested at Multi-due-date

Science.gov (United States)

Hakim Halim, Abdul; Ernawati; Hidayat, Nita P. A.

2018-03-01

This paper deals with a model of batch scheduling for a single batch processor on which a number of parts of a single items are to be processed. The process needs two kinds of setups, i. e., main setups required before processing any batches, and additional setups required repeatedly after the batch processor completes a certain number of batches. The parts to be processed arrive at the shop floor at the times coinciding with their respective starting times of processing, and the completed parts are to be delivered at multiple due dates. The objective adopted for the model is that of minimizing total inventory holding cost consisting of holding cost per unit time for a part in completed batches, and that in in-process batches. The formulation of total inventory holding cost is derived from the so-called actual flow time defined as the interval between arrival times of parts at the production line and delivery times of the completed parts. The actual flow time satisfies not only minimum inventory but also arrival and delivery just in times. An algorithm to solve the model is proposed and a numerical example is shown.

Developing economic order quantity model for non-instantaneous deteriorating items in vendor-managed inventory (VMI) system

Science.gov (United States)

Tat, Roya; Allah Taleizadeh, Ata; Esmaeili, Maryam

2015-05-01

This paper develops an economic order quantity model for non-instantaneous deteriorating items with and without shortages to investigate the performance of the vendor-managed inventory (VMI) system. This model is developed for a two-level supply chain consisting of a single supplier and single retailer with a single non-instantaneous deteriorating item. A numerical example and sensitivity analysis are provided to illustrate how increasing or reducing the related parameters change the optimal values of the decision variables of the two proposed models. The results show that VMI works better and charges lower cost in all conditions.

Racial differences in hypertension knowledge: effects of differential item functioning.

Science.gov (United States)

Ayotte, Brian J; Trivedi, Ranak; Bosworth, Hayden B

2009-01-01

Health-related knowledge is an important component in the self-management of chronic illnesses. The objective of this study was to more accurately assess racial differences in hypertension knowledge by using a latent variable modeling approach that controlled for sociodemographic factors and accounted for measurement issues in the assessment of hypertension knowledge. Cross-sectional data from 1,177 participants (45% African American; 35% female) were analyzed using a multiple indicator multiple causes (MIMIC) modeling approach. Available sociodemographic data included race, education, sex, financial status, and age. All participants completed six items on a hypertension knowledge questionnaire. Overall, the final model suggested that females, Whites, and patients with at least a high school diploma had higher latent knowledge scores than males, African Americans, and patients with less than a high school diploma, respectively. The model also detected differential item functioning (DIF) based on race for two of the items. Specifically, the error rate for African Americans was lower than would be expected given the lower level of latent knowledge on the items, on the questions related to: (a) the association between high blood pressure and kidney disease, and (b) the increased risk African Americans have for developing hypertension. Not accounting for DIF resulted in the difference between Whites and African Americans to be underestimated. These results are discussed in the context of the need for careful measurement of health-related constructs, and how measurement-related issues can result in an inaccurate estimation of racial differences in hypertension knowledge.

Analysis of differential item functioning in the depression item bank from the Patient Reported Outcome Measurement Information System (PROMIS: An item response theory approach

Directory of Open Access Journals (Sweden)

JOSEPH P. EIMICKE

2009-06-01

Full Text Available The aims of this paper are to present findings related to differential item functioning (DIF in the Patient Reported Outcome Measurement Information System (PROMIS depression item bank, and to discuss potential threats to the validity of results from studies of DIF. The 32 depression items studied were modified from several widely used instruments. DIF analyses of gender, age and education were performed using a sample of 735 individuals recruited by a survey polling firm. DIF hypotheses were generated by asking content experts to indicate whether or not they expected DIF to be present, and the direction of the DIF with respect to the studied comparison groups. Primary analyses were conducted using the graded item response model (for polytomous, ordered response category data with likelihood ratio tests of DIF, accompanied by magnitude measures. Sensitivity analyses were performed using other item response models and approaches to DIF detection. Despite some caveats, the items that are recommended for exclusion or for separate calibration were "I felt like crying" and "I had trouble enjoying things that I used to enjoy." The item, "I felt I had no energy," was also flagged as evidencing DIF, and recommended for additional review. On the one hand, false DIF detection (Type 1 error was controlled to the extent possible by ensuring model fit and purification. On the other hand, power for DIF detection might have been compromised by several factors, including sparse data and small sample sizes. Nonetheless, practical and not just statistical significance should be considered. In this case the overall magnitude and impact of DIF was small for the groups studied, although impact was relatively large for some individuals.

Fundamental understanding and development of low-cost, high-efficiency silicon solar cells

Energy Technology Data Exchange (ETDEWEB)

ROHATGI,A.; NARASIMHA,S.; MOSCHER,J.; EBONG,A.; KAMRA,S.; KRYGOWSKI,T.; DOSHI,P.; RISTOW,A.; YELUNDUR,V.; RUBY,DOUGLAS S.

2000-05-01

The overall objectives of this program are (1) to develop rapid and low-cost processes for manufacturing that can improve yield, throughput, and performance of silicon photovoltaic devices, (2) to design and fabricate high-efficiency solar cells on promising low-cost materials, and (3) to improve the fundamental understanding of advanced photovoltaic devices. Several rapid and potentially low-cost technologies are described in this report that were developed and applied toward the fabrication of high-efficiency silicon solar cells.

Food irradiation : estimates of cost of processing

International Nuclear Information System (INIS)

Krishnamurthy, K.; Bongirwar, D.R.

1987-01-01

For estimating the cost of food irradiation, three factors have to be taken into consideration. These are : (1) capital cost incurred on irradiation device and its installation, (2) recurring or running cost which includes maintenance cost and operational expenditure, and (3) product specific cost dependent on the factors specific to the food item to be processed, its storage, handling and distribution. A simple method is proposed to provide estimates of capital costs and running costs and it is applied to prepare a detailed estimate of costs for irradiation processing of onions and fish in India. The cost of processing onions worked out to be between Rs. 40 to 120 per 1000 Kg and for fish Rs 354 per 1000 Kg. These estimates do not take into account transparation costs and fluctuations in marketing procedures. (M.G.B.). 7 tables

Development and validation of a ten-item questionnaire with explanatory illustrations to assess upper extremity disorders: favorable effect of illustrations in the item reduction process.

Science.gov (United States)

Kurimoto, Shigeru; Suzuki, Mikako; Yamamoto, Michiro; Okui, Nobuyuki; Imaeda, Toshihiko; Hirata, Hitoshi

2011-11-01

The purpose of this study is to develop a short and valid measure for upper extremity disorders and to assess the effect of attached illustrations in item reduction of a self-administered disability questionnaire while retaining psychometric properties. A validated questionnaire used to assess upper extremity disorders, the Hand20, was reduced to ten items using two item-reduction techniques. The psychometric properties of the abbreviated form, the Hand10, were evaluated on an independent sample that was used for the shortening process. Validity, reliability, and responsiveness of the Hand10 were retained in the item reduction process. It was possible that the use of explanatory illustrations attached to the Hand10 helped with its reproducibility. The illustrations for the Hand10 promoted text comprehension and motivation to answer the items. These changes resulted in high acceptability; more than 99.3% of patients, including 98.5% of elderly patients, could complete the Hand10 properly. The illustrations had favorable effects on the item reduction process and made it possible to retain precision of the instrument. The Hand10 is a reliable and valid instrument for individual-level applications with the advantage of being compact and broadly applicable, even in elderly individuals.

Energy density, nutrient adequacy, and cost per serving can provide insight into food choices in the lower Mississippi delta.

Science.gov (United States)

Compare differences across food groups for food cost, energy and nutrient profiles of 100 items from a cross-sectional survey of 225 stores in a representative sample of 18 counties across the [Blinded for Review]. Energy, nutrient, and cost profiles for food items were calculated using Naturally Nu...

Development of six PROMIS pediatrics proxy-report item banks.

Science.gov (United States)

Irwin, Debra E; Gross, Heather E; Stucky, Brian D; Thissen, David; DeWitt, Esi Morgan; Lai, Jin Shei; Amtmann, Dagmar; Khastou, Leyla; Varni, James W; DeWalt, Darren A

2012-02-22

Pediatric self-report should be considered the standard for measuring patient reported outcomes (PRO) among children. However, circumstances exist when the child is too young, cognitively impaired, or too ill to complete a PRO instrument and a proxy-report is needed. This paper describes the development process including the proxy cognitive interviews and large-field-test survey methods and sample characteristics employed to produce item parameters for the Patient Reported Outcomes Measurement Information System (PROMIS) pediatric proxy-report item banks. The PROMIS pediatric self-report items were converted into proxy-report items before undergoing cognitive interviews. These items covered six domains (physical function, emotional distress, social peer relationships, fatigue, pain interference, and asthma impact). Caregivers (n = 25) of children ages of 5 and 17 years provided qualitative feedback on proxy-report items to assess any major issues with these items. From May 2008 to March 2009, the large-scale survey enrolled children ages 8-17 years to complete the self-report version and caregivers to complete the proxy-report version of the survey (n = 1548 dyads). Caregivers of children ages 5 to 7 years completed the proxy report survey (n = 432). In addition, caregivers completed other proxy instruments, PedsQL™ 4.0 Generic Core Scales Parent Proxy-Report version, PedsQL™ Asthma Module Parent Proxy-Report version, and KIDSCREEN Parent-Proxy-52. Item content was well understood by proxies and did not require item revisions but some proxies clearly noted that determining an answer on behalf of their child was difficult for some items. Dyads and caregivers of children ages 5-17 years old were enrolled in the large-scale testing. The majority were female (85%), married (70%), Caucasian (64%) and had at least a high school education (94%). Approximately 50% had children with a chronic health condition, primarily asthma, which was diagnosed or treated within 6

No evidence for an item limit in change detection.

Directory of Open Access Journals (Sweden)

Shaiyan Keshvari

Full Text Available Change detection is a classic paradigm that has been used for decades to argue that working memory can hold no more than a fixed number of items ("item-limit models". Recent findings force us to consider the alternative view that working memory is limited by the precision in stimulus encoding, with mean precision decreasing with increasing set size ("continuous-resource models". Most previous studies that used the change detection paradigm have ignored effects of limited encoding precision by using highly discriminable stimuli and only large changes. We conducted two change detection experiments (orientation and color in which change magnitudes were drawn from a wide range, including small changes. In a rigorous comparison of five models, we found no evidence of an item limit. Instead, human change detection performance was best explained by a continuous-resource model in which encoding precision is variable across items and trials even at a given set size. This model accounts for comparison errors in a principled, probabilistic manner. Our findings sharply challenge the theoretical basis for most neural studies of working memory capacity.

Prevalence of item level negative symptoms in first episode psychosis diagnoses.

LENUS (Irish Health Repository)

Lyne, John

2012-03-01

The relevance of negative symptoms across the diagnostic spectrum of the psychoses remains uncertain. The purpose of this study was to report on prevalence of item and subscale level negative symptoms across the first episode psychosis (FEP) diagnostic spectrum in an epidemiological sample, and to ascertain whether items and subscales were more prevalent in a schizophrenia spectrum diagnoses group compared to an \\'all other psychotic diagnoses\\' group. We measured negative symptoms in 330 patients presenting with FEP using the Scale for Assessment of Negative Symptoms (SANS), and ascertained diagnosis using the Structured Clinical Interview for DSM IV. Prevalence of SANS items and subscales were tabulated across all psychotic diagnoses, and logistic regression analysis determined which items and subscales were predictive of schizophrenia spectrum diagnoses. SANS items were most prevalent in schizophrenia spectrum conditions but frequently presented in other FEP diagnoses, particularly substance induced psychotic disorder and Major Depressive Disorder. Brief psychotic disorder and bipolar disorders had low levels of negative symptoms. SANS items and subscales which significantly predicted schizophrenia spectrum diagnoses, were also frequently present in some of the other psychotic diagnoses. Conclusions: SANS items have high prevalence in FEP, and while commonest in schizophrenia spectrum conditions are not restricted to this diagnostic subgroup.

Cost of schizophrenia in England.

Science.gov (United States)

Mangalore, Roshni; Knapp, Martin

2007-03-01

Despite the wide-ranging financial and social burdens associated with schizophrenia, there have been few cost-of-illness studies of this illness in the UK. To provide up-to-date, prevalence based estimate of all costs associated with schizophrenia for England. A bottom-up approach was adopted. Separate cost estimates were made for people living in private households, institutions, prisons and for those who are homeless. The costs included related to: health and social care, informal care, private expenditures, lost productivity, premature mortality, criminal justice services and other public expenditures such as those by the social security system. Data came from many sources, including the UK-SCAP (Schizophrenia Care and Assessment Program) survey, Psychiatric Morbidity Surveys, Department of Health and government publications. The estimated total societal cost of schizophrenia was 6.7 billion pounds in 2004/05. The direct cost of treatment and care that falls on the public purse was about 2 billion pounds; the burden of indirect costs to the society was huge, amounting to nearly 4.7 billion pounds. Cost of informal care and private expenditures borne by families was 615 million pounds. The cost of lost productivity due to unemployment, absence from work and premature mortality of patients was 3.4 billion pounds. The cost of lost productivity of carers was 32 million pounds. Estimated cost to the criminal justice system was about 1 million pounds. It is estimated that about 570 million pounds will be paid out in benefit payments and the cost of administration associated with this is about 14 million pounds. It is difficult to compare estimates from previous cost-of-illness studies due to differences in the methods, scope of analyses and the range of costs covered. Costs estimated in this study are detailed, cover a comprehensive list of relevant items and allow for different levels of disaggregation. The main limitation of the study is that data came from a

76 FR 60474 - Commercial Item Handbook

Science.gov (United States)

2011-09-29

... DEPARTMENT OF DEFENSE Defense Acquisition Regulations System Commercial Item Handbook AGENCY.... SUMMARY: DoD has updated its Commercial Item Handbook. The purpose of the Handbook is to help acquisition personnel develop sound business strategies for procuring commercial items. DoD is seeking industry input on...

Cost of New Technologies in Prostate Cancer Treatment: Systematic Review of Costs and Cost Effectiveness of Robotic-assisted Laparoscopic Prostatectomy, Intensity-modulated Radiotherapy, and Proton Beam Therapy.

Science.gov (United States)

Schroeck, Florian Rudolf; Jacobs, Bruce L; Bhayani, Sam B; Nguyen, Paul L; Penson, David; Hu, Jim

2017-11-01

Some of the high costs of robot-assisted radical prostatectomy (RARP), intensity-modulated radiotherapy (IMRT), and proton beam therapy may be offset by better outcomes or less resource use during the treatment episode. To systematically review the literature to identify the key economic trade-offs implicit in a particular treatment choice for prostate cancer. We systematically reviewed the literature according to the Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) statement and protocol. We searched Medline, Embase, and Web of Science for articles published between January 2001 and July 2016, which compared the treatment costs of RARP, IMRT, or proton beam therapy to the standard treatment. We identified 37, nine, and three studies, respectively. RARP is costlier than radical retropubic prostatectomy for hospitals and payers. However, RARP has the potential for a moderate cost advantage for payers and society over a longer time horizon when optimal cancer and quality-of-life outcomes are achieved. IMRT is more expensive from a payer's perspective compared with three-dimensional conformal radiotherapy, but also more cost effective when defined by an incremental cost effectiveness ratio new versus traditional technologies is costlier. However, given the low quality of evidence and the inconsistencies across studies, the precise difference in costs remains unclear. Attempts to estimate whether this increased cost is worth the expense are hampered by the uncertainty surrounding improvements in outcomes, such as cancer control and side effects of treatment. If the new technologies can consistently achieve better outcomes, then they may be cost effective. We review the cost and cost effectiveness of robot-assisted radical prostatectomy, intensity-modulated radiotherapy, and proton beam therapy in prostate cancer treatment. These technologies are costlier than their traditional counterparts. It remains unclear whether their use is associated

Novel Low Cost, High Reliability Wind Turbine Drivetrain

Energy Technology Data Exchange (ETDEWEB)

Chobot, Anthony; Das, Debarshi; Mayer, Tyler; Markey, Zach; Martinson, Tim; Reeve, Hayden; Attridge, Paul; El-Wardany, Tahany

2012-09-13

Clipper Windpower, in collaboration with United Technologies Research Center, the National Renewable Energy Laboratory, and Hamilton Sundstrand Corporation, developed a low-cost, deflection-compliant, reliable, and serviceable chain drive speed increaser. This chain and sprocket drivetrain design offers significant breakthroughs in the areas of cost and serviceability and addresses the key challenges of current geared and direct-drive systems. The use of gearboxes has proven to be challenging; the large torques and bending loads associated with use in large multi-MW wind applications have generally limited demonstrated lifetime to 8-10 years [1]. The large cost of gearbox replacement and the required use of large, expensive cranes can result in gearbox replacement costs on the order of $1M, representing a significant impact to overall cost of energy (COE). Direct-drive machines eliminate the gearbox, thereby targeting increased reliability and reduced life-cycle cost. However, the slow rotational speeds require very large and costly generators, which also typically have an undesirable dependence on expensive rare-earth magnet materials and large structural penalties for precise air gap control. The cost of rare-earth materials has increased 20X in the last 8 years representing a key risk to ever realizing the promised cost of energy reductions from direct-drive generators. A common challenge to both geared and direct drive architectures is a limited ability to manage input shaft deflections. The proposed Clipper drivetrain is deflection-compliant, insulating later drivetrain stages and generators from off-axis loads. The system is modular, allowing for all key parts to be removed and replaced without the use of a high capacity crane. Finally, the technology modularity allows for scalability and many possible drivetrain topologies. These benefits enable reductions in drivetrain capital cost by 10.0%, levelized replacement and O&M costs by 26.7%, and overall cost of

Bevacizumab in Treatment of High-Risk Ovarian Cancer—A Cost-Effectiveness Analysis

Science.gov (United States)

Herzog, Thomas J.; Hu, Lilian; Monk, Bradley J.; Kiet, Tuyen; Blansit, Kevin; Kapp, Daniel S.; Yu, Xinhua

2014-01-01

Objective. The objective of this study was to evaluate a cost-effectiveness strategy of bevacizumab in a subset of high-risk advanced ovarian cancer patients with survival benefit. Methods. A subset analysis of the International Collaboration on Ovarian Neoplasms 7 trial showed that additions of bevacizumab (B) and maintenance bevacizumab (mB) to paclitaxel (P) and carboplatin (C) improved the overall survival (OS) of high-risk advanced cancer patients. Actual and estimated costs of treatment were determined from Medicare payment. Incremental cost-effectiveness ratio per life-year saved was established. Results. The estimated cost of PC is $535 per cycle; PCB + mB (7.5 mg/kg) is $3,760 per cycle for the first 6 cycles and then $3,225 per cycle for 12 mB cycles. Of 465 high-risk stage IIIC (>1 cm residual) or stage IV patients, the previously reported OS after PC was 28.8 months versus 36.6 months in those who underwent PCB + mB. With an estimated 8-month improvement in OS, the incremental cost-effectiveness ratio of B was $167,771 per life-year saved. Conclusion. In this clinically relevant subset of women with high-risk advanced ovarian cancer with overall survival benefit after bevacizumab, our economic model suggests that the incremental cost of bevacizumab was approximately $170,000. PMID:24721817

Mining of high utility itemsets of size-2 with pruning strategies and negative item values for B2C companies based on experiential marketing approach

Directory of Open Access Journals (Sweden)

Gaurav Gahlot

2016-09-01

Full Text Available Business to customer (B2C marketing for the retail organisations is the most rapid adoption made by the developed countries, while it has the pitfalls in the developing nations. B2C companies have been continually putting some or the other lucrative offers and schemes on their manufactured products. There happens to be no logical demand of clubbing the sale of two products. The only need of such clubbing is the financial crisis which the company wants to overcome. Information technology can renew and make the competitive advantage for B2C companies. In this paper, a novel way for finding the itemset clubs is proposed, hence extending Apriori algorithm. The proposed methodology aims at finding the combinations of the products which can be sold together with the high levels of utility. This allows for making good profits for the company. Unlike contemporary way of items bearing positive values, negative item values have been looked into. The MHUIS-2wPS algorithm utilises the transactional experiences of the retail stores and outputs the size-2 clubs. The MHUI-NIV algorithm caters for the items with negative item values. The dissertation applies various pruning strategies for the discovery of high utility itemsets. These prunings will help remove the unnecessary formation of the low utility extensions. Later, various datasets have been used to show the essence of the algorithms.

The high intensity solar cell: Key to low cost photovoltaic power

Science.gov (United States)

Sater, B. L.; Goradia, C.

1975-01-01

The design considerations and performance characteristics of the 'high intensity' (HI) solar cell are presented. A high intensity solar system was analyzed to determine its cost effectiveness and to assess the benefits of further improving HI cell efficiency. It is shown that residential sized systems can be produced at less than $1000/kW peak electric power. Due to their superior high intensity performance characteristics compared to the conventional and VMJ cells, HI cells and light concentrators may be the key to low cost photovoltaic power.

An improved set of standards for finding cost for cost-effectiveness analysis.

Science.gov (United States)

Barnett, Paul G

2009-07-01

Guidelines have helped standardize methods of cost-effectiveness analysis, allowing different interventions to be compared and enhancing the generalizability of study findings. There is agreement that all relevant services be valued from the societal perspective using a long-term time horizon and that more exact methods be used to cost services most affected by the study intervention. Guidelines are not specific enough with respect to costing methods, however. The literature was reviewed to identify the problems associated with the 4 principal methods of cost determination. Microcosting requires direct measurement and is ordinarily reserved to cost novel interventions. Analysts should include nonwage labor cost, person-level and institutional overhead, and the cost of development, set-up activities, supplies, space, and screening. Activity-based cost systems have promise of finding accurate costs of all services provided, but are not widely adopted. Quality must be evaluated and the generalizability of cost estimates to other settings must be considered. Administrative cost estimates, chiefly cost-adjusted charges, are widely used, but the analyst must consider items excluded from the available system. Gross costing methods determine quantity of services used and employ a unit cost. If the intervention will affect the characteristics of a service, the method should not assume that the service is homogeneous. Questions are posed for future reviews of the quality of costing methods. The analyst must avoid inappropriate assumptions, especially those that bias the analysis by exclusion of costs that are affected by the intervention under study.

Automated addition of Chelex solution to tubes containing trace items

DEFF Research Database (Denmark)

Stangegaard, Michael; Hansen, Thomas Møller; Hansen, Anders Johannes

2011-01-01

Extraction of DNA from trace items for forensic genetic DNA typing using a manual Chelex based extraction protocol requires addition of Chelex solution to sample tubes containing trace items. Automated of addition of Chelex solution may be hampered by high viscosity of the solution and fast...... sedimentation rate of the Chelex beads. Here, we present a simple method that can be used on an Eppendorf epMotion liquid handler resolving these issues...

A review on future trends of LWR fuel cycle costs

International Nuclear Information System (INIS)

Tamiya, S.; Otomo, T.; Meguro, T.

1977-01-01

In the cost estimations in the past, the main components of fuel cycle were mining and milling, uranium enrichment and fuel fabrication, and reprocessing charge deemed to be recovered by plutonium credit. Since the oil crisis, every component of fuel cycle cost has gone up in recent years as well as the construction cost of a power station. Recent analysis shows that the costs in the back end of fuel cycle are much higher than those anticipated several years ago, although their contribution to the electricity generating cost by nuclear would be small. The situation of the back end of the fuel cycle has been quite changed in recent years, and there are still many uncertainties in this field, that is, regulatory requirements for reprocessing plant such as safety, safeguards, environmental protection and high level waste management. So, it makes it more difficult to estimate the investment in this sector of fuel cycle, therefore, to estimate the cost of this sector. The institutional problems must be cleared in relation to the ultimate disposal of high level waste, too. Co-location of some parts of fuel cycle facilities may also affect on the fuel cycle costs. In this paper a review is made of the future trend of nuclear fuel cycle cost of LWR based on the recent analysis. Those factors which affect the fuel cycle costs are also discussed. In order to reduce the uncertainties of the cost estimations as soon as possible, the necessity is emphasized to discuss internationally such items as the treatment and disposal of high level radioactive wastes, siting issues of a reprocessing plant, physical protection of plutonium and the effects of plutonium on the environment

Charting the cost of nutritionally-adequate diets in Uganda, 2000-2011

African Journals Online (AJOL)

To compare food costs over time, prices are deflated using the monthly consumer price index\\ (CPI). Food prices are converted to prices per 100 gram portions, so as to maintain consistency with units of nutrient composition for given food items. The diet cost is compared to the Ugandan poverty line over time. The real cost ...

Capital and operating cost estimates for high temperature superconducting magnetic energy storage

International Nuclear Information System (INIS)

Schoenung, S.M.; Meier, W.R.; Fagaly, R.L.; Heiberger, M.; Stephens, R.B.; Leuer, J.A.; Guzman, R.A.

1992-01-01

Capital and operating costs have been estimated for mid-scale (2 to 200 Mwh) superconducting magnetic energy storage (SMES) designed to use high temperature superconductors (HTS). Capital costs are dominated by the cost of superconducting materials. Operating costs, primarily for regeneration, are significantly reduced for HTS-SMES in comparison to low temperature, conventional systems. This cost component is small compared to other O and M and capital components, when levelized annual costs are projected. In this paper, the developments required for HTS-SMES feasibility are discussed

A review of the effects on IRT item parameter estimates with a focus on misbehaving common items in test equating

Directory of Open Access Journals (Sweden)

Michalis P Michaelides

2010-10-01

Full Text Available Many studies have investigated the topic of change or drift in item parameter estimates in the context of Item Response Theory. Content effects, such as instructional variation and curricular emphasis, as well as context effects, such as the wording, position, or exposure of an item have been found to impact item parameter estimates. The issue becomes more critical when items with estimates exhibiting differential behavior across test administrations are used as common for deriving equating transformations. This paper reviews the types of effects on IRT item parameter estimates and focuses on the impact of misbehaving or aberrant common items on equating transformations. Implications relating to test validity and the judgmental nature of the decision to keep or discard aberrant common items are discussed, with recommendations for future research into more informed and formal ways of dealing with misbehaving common items.

A Review of the Effects on IRT Item Parameter Estimates with a Focus on Misbehaving Common Items in Test Equating.

Science.gov (United States)

Michaelides, Michalis P

2010-01-01

Many studies have investigated the topic of change or drift in item parameter estimates in the context of item response theory (IRT). Content effects, such as instructional variation and curricular emphasis, as well as context effects, such as the wording, position, or exposure of an item have been found to impact item parameter estimates. The issue becomes more critical when items with estimates exhibiting differential behavior across test administrations are used as common for deriving equating transformations. This paper reviews the types of effects on IRT item parameter estimates and focuses on the impact of misbehaving or aberrant common items on equating transformations. Implications relating to test validity and the judgmental nature of the decision to keep or discard aberrant common items are discussed, with recommendations for future research into more informed and formal ways of dealing with misbehaving common items.

Item response theory analyses of the Delis-Kaplan Executive Function System card sorting subtest.

Science.gov (United States)

Spencer, Mercedes; Cho, Sun-Joo; Cutting, Laurie E

2018-02-02

In the current study, we examined the dimensionality of the 16-item Card Sorting subtest of the Delis-Kaplan Executive Functioning System assessment in a sample of 264 native English-speaking children between the ages of 9 and 15 years. We also tested for measurement invariance for these items across age and gender groups using item response theory (IRT). Results of the exploratory factor analysis indicated that a two-factor model that distinguished between verbal and perceptual items provided the best fit to the data. Although the items demonstrated measurement invariance across age groups, measurement invariance was violated for gender groups, with two items demonstrating differential item functioning for males and females. Multigroup analysis using all 16 items indicated that the items were more effective for individuals whose IRT scale scores were relatively high. A single-group explanatory IRT model using 14 non-differential item functioning items showed that for perceptual ability, females scored higher than males and that scores increased with age for both males and females; for verbal ability, the observed increase in scores across age differed for males and females. The implications of these findings are discussed.

Cleaning and disinfection of patient care items, in relation to small animals.

Science.gov (United States)

Weese, J Scott

2015-03-01

Patient care involves several medical and surgical items, including those that come into contact with sterile or other high-risk body sites and items that have been used on other patients. These situations create a risk for infection if items are contaminated, and the implications can range from single infections to large outbreaks. To minimize the risk, proper equipment cleaning, disinfection/sterilization, storage, and monitoring practices are required. Risks posed by different items; the required level of cleaning, disinfection, or sterilization; the methods that are available and appropriate; and how to ensure efficacy, must be considered when designing and implementing an infection control program. Copyright © 2015 Elsevier Inc. All rights reserved.

A Comparison of the 27-Item and 12-Item Intolerance of Uncertainty Scales

Science.gov (United States)

Khawaja, Nigar G.; Yu, Lai Ngo Heidi

2010-01-01

The 27-item Intolerance of Uncertainty Scale (IUS) has become one of the most frequently used measures of Intolerance of Uncertainty. More recently, an abridged, 12-item version of the IUS has been developed. The current research used clinical (n = 50) and non-clinical (n = 56) samples to examine and compare the psychometric properties of both…

Parents and the High Cost of Child Care: 2012 Report

Science.gov (United States)

Child Care Aware of America, 2012

2012-01-01

"Parents and the High Cost of Child Care: 2012 Report" presents 2011 data reflecting what parents pay for full-time child care in America. It includes average fees for both child care centers and family child care homes. Information was collected through a survey conducted in January 2012 that asked for the average costs charged for…

Do Personality Scale Items Function Differently in People with High and Low IQ?

Science.gov (United States)

Waiyavutti, Chakadee; Johnson, Wendy; Deary, Ian J.

2012-01-01

Intelligence differences might contribute to true differences in personality traits. It is also possible that intelligence might contribute to differences in understanding and interpreting personality items. Previous studies have not distinguished clearly between these possibilities. Before it can be accepted that scale score differences actually…

More is not Always Better: The Relation between Item Response and Item Response Time in Raven’s Matrices

Directory of Open Access Journals (Sweden)

Frank Goldhammer

2015-03-01

Full Text Available The role of response time in completing an item can have very different interpretations. Responding more slowly could be positively related to success as the item is answered more carefully. However, the association may be negative if working faster indicates higher ability. The objective of this study was to clarify the validity of each assumption for reasoning items considering the mode of processing. A total of 230 persons completed a computerized version of Raven’s Advanced Progressive Matrices test. Results revealed that response time overall had a negative effect. However, this effect was moderated by items and persons. For easy items and able persons the effect was strongly negative, for difficult items and less able persons it was less negative or even positive. The number of rules involved in a matrix problem proved to explain item difficulty significantly. Most importantly, a positive interaction effect between the number of rules and item response time indicated that the response time effect became less negative with an increasing number of rules. Moreover, exploratory analyses suggested that the error type influenced the response time effect.

Identification of high school students' ability level of constructing free body diagrams to solve restricted and structured response items in force matter

Science.gov (United States)

Rahmaniar, Andinisa; Rusnayati, Heni; Sutiadi, Asep

2017-05-01

While solving physics problem particularly in force matter, it is needed to have the ability of constructing free body diagrams which can help students to analyse every force which acts on an object, the length of its vector and the naming of its force. Mix method was used to explain the result without any special treatment to participants. The participants were high school students in first grade totals 35 students. The purpose of this study is to identify students' ability level of constructing free body diagrams in solving restricted and structured response items. Considering of two types of test, every student would be classified into four levels ability of constructing free body diagrams which is every level has different characteristic and some students were interviewed while solving test in order to know how students solve the problem. The result showed students' ability of constructing free body diagrams on restricted response items about 34.86% included in no evidence of level, 24.11% inadequate level, 29.14% needs improvement level and 4.0% adequate level. On structured response items is about 16.59% included no evidence of level, 23.99% inadequate level, 36% needs improvement level, and 13.71% adequate level. Researcher found that students who constructed free body diagrams first and constructed free body diagrams correctly were more successful in solving restricted and structured response items.

Nickel and cobalt release from jewellery and metal clothing items in Korea.

Science.gov (United States)

Cheong, Seung Hyun; Choi, You Won; Choi, Hae Young; Byun, Ji Yeon

2014-01-01

In Korea, the prevalence of nickel allergy has shown a sharply increasing trend. Cobalt contact allergy is often associated with concomitant reactions to nickel, and is more common in Korea than in western countries. The aim of the present study was to investigate the prevalence of items that release nickel and cobalt on the Korean market. A total of 471 items that included 193 branded jewellery, 202 non-branded jewellery and 76 metal clothing items were sampled and studied with a dimethylglyoxime (DMG) test and a cobalt spot test to detect nickel and cobalt release, respectively. Nickel release was detected in 47.8% of the tested items. The positive rates in the DMG test were 12.4% for the branded jewellery, 70.8% for the non-branded jewellery, and 76.3% for the metal clothing items. Cobalt release was found in 6.2% of items. Among the types of jewellery, belts and hair pins showed higher positive rates in both the DMG test and the cobalt spot test. Our study shows that the prevalence of items that release nickel or cobalt among jewellery and metal clothing items is high in Korea. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Negative effects of item repetition on source memory.

Science.gov (United States)

Kim, Kyungmi; Yi, Do-Joon; Raye, Carol L; Johnson, Marcia K

2012-08-01

In the present study, we explored how item repetition affects source memory for new item-feature associations (picture-location or picture-color). We presented line drawings varying numbers of times in Phase 1. In Phase 2, each drawing was presented once with a critical new feature. In Phase 3, we tested memory for the new source feature of each item from Phase 2. Experiments 1 and 2 demonstrated and replicated the negative effects of item repetition on incidental source memory. Prior item repetition also had a negative effect on source memory when different source dimensions were used in Phases 1 and 2 (Experiment 3) and when participants were explicitly instructed to learn source information in Phase 2 (Experiments 4 and 5). Importantly, when the order between Phases 1 and 2 was reversed, such that item repetition occurred after the encoding of critical item-source combinations, item repetition no longer affected source memory (Experiment 6). Overall, our findings did not support predictions based on item predifferentiation, within-dimension source interference, or general interference from multiple traces of an item. Rather, the findings were consistent with the idea that prior item repetition reduces attention to subsequent presentations of the item, decreasing the likelihood that critical item-source associations will be encoded.

Energy Density, Nutrient Adequacy, and Cost per Serving Can Provide Insight into Food Choices in the Lower Mississippi Delta

Science.gov (United States)

Connell, Carol L.; Zoellner, Jamie M.; Yadrick, M. Kathleen; Chekuri, Srinivasa C.; Crook, Lashaundrea B.; Bogle, Margaret L.

2012-01-01

Objective: To compare differences across food groups for food cost, energy, and nutrient profiles of 100 items from a cross-sectional survey of 225 stores in 18 counties across the Lower Mississippi Delta of Arkansas, Louisiana, and Mississippi. Methods: Energy, nutrient, and cost profiles for food items were calculated by using Naturally Nutrient…

Re-Engineering a High Performance Electrical Series Elastic Actuator for Low-Cost Industrial Applications

Directory of Open Access Journals (Sweden)

Kenan Isik

2017-01-01

Full Text Available Cost is an important consideration when transferring a technology from research to industrial and educational use. In this paper, we introduce the design of an industrial grade series elastic actuator (SEA performed via re-engineering a research grade version of it. Cost-constrained design requires careful consideration of the key performance parameters for an optimal performance-to-cost component selection. To optimize the performance of the new design, we started by matching the capabilities of a high-performance SEA while cutting down its production cost significantly. Our posit was that performing a re-engineering design process on an existing high-end device will significantly reduce the cost without compromising the performance drastically. As a case study of design for manufacturability, we selected the University of Texas Series Elastic Actuator (UT-SEA, a high-performance SEA, for its high power density, compact design, high efficiency and high speed properties. We partnered with an industrial corporation in China to research the best pricing options and to exploit the retail and production facilities provided by the Shenzhen region. We succeeded in producing a low-cost industrial grade actuator at one-third of the cost of the original device by re-engineering the UT-SEA with commercial off-the-shelf components and reducing the number of custom-made parts. Subsequently, we conducted performance tests to demonstrate that the re-engineered product achieves the same high-performance specifications found in the original device. With this paper, we aim to raise awareness in the robotics community on the possibility of low-cost realization of low-volume, high performance, industrial grade research and education hardware.

Psychometric Consequences of Subpopulation Item Parameter Drift

Science.gov (United States)

Huggins-Manley, Anne Corinne

2017-01-01

This study defines subpopulation item parameter drift (SIPD) as a change in item parameters over time that is dependent on subpopulations of examinees, and hypothesizes that the presence of SIPD in anchor items is associated with bias and/or lack of invariance in three psychometric outcomes. Results show that SIPD in anchor items is associated…

Cost of disorders of the brain in Europe 2010

DEFF Research Database (Denmark)

Gustavsson, Anders; Svensson, Mikael; Jacobi, Frank

2011-01-01

The spectrum of disorders of the brain is large, covering hundreds of disorders that are listed in either the mental or neurological disorder chapters of the established international diagnostic classification systems. These disorders have a high prevalence as well as short- and long-term impairm......The spectrum of disorders of the brain is large, covering hundreds of disorders that are listed in either the mental or neurological disorder chapters of the established international diagnostic classification systems. These disorders have a high prevalence as well as short- and long......-term impairments and disabilities. Therefore they are an emotional, financial and social burden to the patients, their families and their social network. In a 2005 landmark study, we estimated for the first time the annual cost of 12 major groups of disorders of the brain in Europe and gave a conservative estimate...... report we cover 19 major groups of disorders, 7 more than previously, of an increased range of age groups and more cost items. We therefore present much improved cost estimates. Our revised estimates also now include the new EU member states, and hence a population of 514 million people....

The Differences among Three-, Four-, and Five-Option-Item Formats in the Context of a High-Stakes English-Language Listening Test

Science.gov (United States)

Lee, HyeSun; Winke, Paula

2013-01-01

We adapted three practice College Scholastic Ability Tests (CSAT) of English listening, each with five-option items, to create four- and three-option versions by asking 73 Korean speakers or learners of English to eliminate the least plausible options in two rounds. Two hundred and sixty-four Korean high school English-language learners formed…

Location Indices for Ordinal Polytomous Items Based on Item Response Theory. Research Report. ETS RR-15-20

Science.gov (United States)

Ali, Usama S.; Chang, Hua-Hua; Anderson, Carolyn J.

2015-01-01

Polytomous items are typically described by multiple category-related parameters; situations, however, arise in which a single index is needed to describe an item's location along a latent trait continuum. Situations in which a single index would be needed include item selection in computerized adaptive testing or test assembly. Therefore single…

Defining the Costs of Reusable Flexible Ureteroscope Reprocessing Using Time-Driven Activity-Based Costing.

Science.gov (United States)

Isaacson, Dylan; Ahmad, Tessnim; Metzler, Ian; Tzou, David T; Taguchi, Kazumi; Usawachintachit, Manint; Zetumer, Samuel; Sherer, Benjamin; Stoller, Marshall; Chi, Thomas

2017-10-01

Careful decontamination and sterilization of reusable flexible ureteroscopes used in ureterorenoscopy cases prevent the spread of infectious pathogens to patients and technicians. However, inefficient reprocessing and unavailability of ureteroscopes sent out for repair can contribute to expensive operating room (OR) delays. Time-driven activity-based costing (TDABC) was applied to describe the time and costs involved in reprocessing. Direct observation and timing were performed for all steps in reprocessing of reusable flexible ureteroscopes following operative procedures. Estimated times needed for each step by which damaged ureteroscopes identified during reprocessing are sent for repair were characterized through interviews with purchasing analyst staff. Process maps were created for reprocessing and repair detailing individual step times and their variances. Cost data for labor and disposables used were applied to calculate per minute and average step costs. Ten ureteroscopes were followed through reprocessing. Process mapping for ureteroscope reprocessing averaged 229.0 ± 74.4 minutes, whereas sending a ureteroscope for repair required an estimated 143 minutes per repair. Most steps demonstrated low variance between timed observations. Ureteroscope drying was the longest and highest variance step at 126.5 ± 55.7 minutes and was highly dependent on manual air flushing through the ureteroscope working channel and ureteroscope positioning in the drying cabinet. Total costs for reprocessing totaled $96.13 per episode, including the cost of labor and disposable items. Utilizing TDABC delineates the full spectrum of costs associated with ureteroscope reprocessing and identifies areas for process improvement to drive value-based care. At our institution, ureteroscope drying was one clearly identified target area. Implementing training in ureteroscope drying technique could save up to 2 hours per reprocessing event, potentially preventing expensive OR delays.

Few items in the thyroid-related quality of life instrument ThyPRO exhibited differential item functioning.

Science.gov (United States)

Watt, Torquil; Groenvold, Mogens; Hegedüs, Laszlo; Bonnema, Steen Joop; Rasmussen, Åse Krogh; Feldt-Rasmussen, Ulla; Bjorner, Jakob Bue

2014-02-01

To evaluate the extent of differential item functioning (DIF) within the thyroid-specific quality of life patient-reported outcome measure, ThyPRO, according to sex, age, education and thyroid diagnosis. A total of 838 patients with benign thyroid diseases completed the ThyPRO questionnaire (84 five-point items, 13 scales). Uniform and nonuniform DIF were investigated using ordinal logistic regression, testing for both statistical significance and magnitude (∆R(2) > 0.02). Scale level was estimated by the sum score, after purification. Twenty instances of DIF in 17 of the 84 items were found. Eight according to diagnosis, where the goiter scale was the one most affected, possibly due to differing perceptions in patients with auto-immune thyroid diseases compared to patients with simple goiter. Eight DIFs according to age were found, of which 5 were in positively worded items, which younger patients were more likely to endorse; one according to gender: women were more likely to report crying, and three according to educational level. The vast majority of DIF had only minor influence on the scale scores (0.1-2.3 points on the 0-100 scales), but two DIF corresponded to a difference of 4.6 and 9.8, respectively. Ordinal logistic regression identified DIF in 17 of 84 items. The potential impact of this on the present scales was low, but items displaying DIF could be avoided when developing abbreviated scales, where the potential impact of DIF (due to fewer items) will be larger.

Cost of Mastitis in Scottish Dairy Herds with Low and High Subclinical Mastitis Problems

OpenAIRE

YALÇIN, Cengiz

2000-01-01

The aim of this study was to estimate the cost of mastitis and the contribution of each cost component of mastitis to the total mastitis induced cost in herds with low and high levels of subclinical mastitis under Scottish field conditions. It was estimated that mastitis cost £140 per cow/year to the average Scottish dairy farmer in 1996. However, this figure was as low as £69 per cow/year in herds with lower levels of subclinical mastitis, and as high as £228 cow/year in herds with high s...

Evolution of investment costs related to wood energy collective installations (2000-2006). Final report - Synthesis

International Nuclear Information System (INIS)

2009-04-01

Based on a survey on 90 French projects, and on a comparison with 76 German projects and 36 Austrian projects, this document proposes a synthesis of a study which aimed at identifying and analysing the evolution of investment costs for wood collective heating systems between 2000 and 2006. Data are analysed and commented while stressing their limitations which are related to their quality, to project heterogeneity, to economic value scattering. The evolution of investment costs of French projects is analysed in terms of global cost, and of items (heat production, public works, studies and construction, item ratios)

PENGEMBANGAN TES BERPIKIR KRITIS DENGAN PENDEKATAN ITEM RESPONSE THEORY

Directory of Open Access Journals (Sweden)

Fajrianthi Fajrianthi

2016-06-01

Assumption, Deduction, Interpretation dan Evaluation of arguments. 1453 respondents from Surabaya, Gresik, Tuban, Bojonegoro and Rembang were used for trailing the test. The dichotomous data were analized using the Item Response Theory with two parameter logistic model using statistical program Mplus ver. 6.11. Several assumptions were tested prior the IRT analysis; the test of unidimensionality, local independency and Item Characteristic Curve (ICC. Amongst 68 items only 15 items had good discrimination parameter. Difficulty item level ranged from – 4.95 to 2.448. The study was limited in producing high number of qualified items due to its failure in finding subject matter experts in critical thinking area and inadequate choice in scoring method. Keywords: test development, critical thinking, Item response theory

Inventory control with multiple setup costs

NARCIS (Netherlands)

Alp, O.; Huh, W.T.; Tan, T.

2014-01-01

We consider an infinite-horizon, periodic-review, single-item production/inventory system with random demand and backordering, where multiple setups are allowed in any period and a separate fixed cost is associated for each setup. Contrary to the majority of the literature on this topic, we do not

Incorporation of an item/material attribute system into PAMTRAK

International Nuclear Information System (INIS)

Anspach, D.A.; Waddoups, I.G.; Fox, E.T.

1994-01-01

The Department of Energy (DOE) mission is changing due to the number of nuclear weapon reductions by the United States and the former Soviet Union with long-term storage requirements for DOE sites increasing. New technology to ensure the integrity of special nuclear material (SNM) in storage is available to sites to supplement manual physical inventories. This allows them to decrease operating costs while keeping radiation exposure at minimal levels. We have developed a generic, real time, personnel tracking and material monitoring system named PAMTRAK. Such a system can significantly reduce the number of required, manual physical inventories at DOE sites while increasing assurance that an insider has not diverted or stolen material. Until recently Pamtrak used only material monitoring devices that provided location/containment attributes. However, Westinghouse Electric Corp. and Metrox, Inc. have recently developed hard-wired item/material attribute systems that monitor both temperature and weight. We have incorporated both of these systems into PAMTRAK. If a site employed one of these item/material attribute systems, it could decrease its manual inventory frequency to three years. This paper describes how a site might implement such a system to meet the DOE's requirements

Low Cost, Low Power, High Sensitivity Magnetometer

Science.gov (United States)

2008-12-01

which are used to measure the small magnetic signals from brain. Other types of vector magnetometers are fluxgate , coil based, and magnetoresistance...concentrator with the magnetometer currently used in Army multimodal sensor systems, the Brown fluxgate . One sees the MEMS fluxgate magnetometer is...Guedes, A.; et al., 2008: Hybrid - LOW COST, LOW POWER, HIGH SENSITIVITY MAGNETOMETER A.S. Edelstein*, James E. Burnette, Greg A. Fischer, M.G

Loglinear multidimensional IRT models for polytomously scired Items

NARCIS (Netherlands)

Kelderman, Henk

1988-01-01

A loglinear item response theory (IRT) model is proposed that relates polytomously scored item responses to a multidimensional latent space. Each item may have a different response function where each item response may be explained by one or more latent traits. Item response functions may follow a

48 CFR 852.214-72 - Alternate item(s).

Science.gov (United States)

2010-10-01

... AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Texts of Provisions and Clauses 852.214-72... 2008) Bids on []* will be given equal consideration along with bids on []** and any such bids received... [].** * Contracting officer will insert an alternate item that is considered acceptable. ** Contracting officer will...

Development of six PROMIS pediatrics proxy-report item banks

Directory of Open Access Journals (Sweden)

Irwin Debra E

2012-02-01

Full Text Available Abstract Background Pediatric self-report should be considered the standard for measuring patient reported outcomes (PRO among children. However, circumstances exist when the child is too young, cognitively impaired, or too ill to complete a PRO instrument and a proxy-report is needed. This paper describes the development process including the proxy cognitive interviews and large-field-test survey methods and sample characteristics employed to produce item parameters for the Patient Reported Outcomes Measurement Information System (PROMIS pediatric proxy-report item banks. Methods The PROMIS pediatric self-report items were converted into proxy-report items before undergoing cognitive interviews. These items covered six domains (physical function, emotional distress, social peer relationships, fatigue, pain interference, and asthma impact. Caregivers (n = 25 of children ages of 5 and 17 years provided qualitative feedback on proxy-report items to assess any major issues with these items. From May 2008 to March 2009, the large-scale survey enrolled children ages 8-17 years to complete the self-report version and caregivers to complete the proxy-report version of the survey (n = 1548 dyads. Caregivers of children ages 5 to 7 years completed the proxy report survey (n = 432. In addition, caregivers completed other proxy instruments, PedsQL™ 4.0 Generic Core Scales Parent Proxy-Report version, PedsQL™ Asthma Module Parent Proxy-Report version, and KIDSCREEN Parent-Proxy-52. Results Item content was well understood by proxies and did not require item revisions but some proxies clearly noted that determining an answer on behalf of their child was difficult for some items. Dyads and caregivers of children ages 5-17 years old were enrolled in the large-scale testing. The majority were female (85%, married (70%, Caucasian (64% and had at least a high school education (94%. Approximately 50% had children with a chronic health condition, primarily

Development of the PROMIS positive emotional and sensory expectancies of smoking item banks.

Science.gov (United States)

Tucker, Joan S; Shadel, William G; Edelen, Maria Orlando; Stucky, Brian D; Li, Zhen; Hansen, Mark; Cai, Li

2014-09-01

The positive emotional and sensory expectancies of cigarette smoking include improved cognitive abilities, positive affective states, and pleasurable sensorimotor sensations. This paper describes development of Positive Emotional and Sensory Expectancies of Smoking item banks that will serve to standardize the assessment of this construct among daily and nondaily cigarette smokers. Data came from daily (N = 4,201) and nondaily (N =1,183) smokers who completed an online survey. To identify a unidimensional set of items, we conducted item factor analyses, item response theory analyses, and differential item functioning analyses. Additionally, we evaluated the performance of fixed-item short forms (SFs) and computer adaptive tests (CATs) to efficiently assess the construct. Eighteen items were included in the item banks (15 common across daily and nondaily smokers, 1 unique to daily, 2 unique to nondaily). The item banks are strongly unidimensional, highly reliable (reliability = 0.95 for both), and perform similarly across gender, age, and race/ethnicity groups. A SF common to daily and nondaily smokers consists of 6 items (reliability = 0.86). Results from simulated CATs indicated that, on average, less than 8 items are needed to assess the construct with adequate precision using the item banks. These analyses identified a new set of items that can assess the positive emotional and sensory expectancies of smoking in a reliable and standardized manner. Considerable efficiency in assessing this construct can be achieved by using the item bank SF, employing computer adaptive tests, or selecting subsets of items tailored to specific research or clinical purposes. © The Author 2014. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Using Reversed MFCC and IT-EM for Automatic Speaker Verification

Directory of Open Access Journals (Sweden)

Sheeraz Memon

2012-01-01

Full Text Available This paper proposes text independent automatic speaker verification system using IMFCC (Inverse/ Reverse Mel Frequency Coefficients and IT-EM (Information Theoretic Expectation Maximization. To perform speaker verification, feature extraction using Mel scale has been widely applied and has established better results. The IMFCC is based on inverse Mel-scale. The IMFCC effectively captures information available at the high frequency formants which is ignored by the MFCC. In this paper the fusion of MFCC and IMFCC at input level is proposed. GMMs (Gaussian Mixture Models based on EM (Expectation Maximization have been widely used for classification of text independent verification. However EM comes across the convergence issue. In this paper we use our proposed IT-EM which has faster convergence, to train speaker models. IT-EM uses information theory principles such as PDE (Parzen Density Estimation and KL (Kullback-Leibler divergence measure. IT-EM acclimatizes the weights, means and covariances, like EM. However, IT-EM process is not performed on feature vector sets but on a set of centroids obtained using IT (Information Theoretic metric. The IT-EM process at once diminishes divergence measure between PDE estimates of features distribution within a given class and the centroids distribution within the same class. The feature level fusion and IT-EM is tested for the task of speaker verification using NIST2001 and NIST2004. The experimental evaluation validates that MFCC/IMFCC has better results than the conventional delta/MFCC feature set. The MFCC/IMFCC feature vector size is also much smaller than the delta MFCC thus reducing the computational burden as well. IT-EM method also showed faster convergence, than the conventional EM method, and thus it leads to higher speaker recognition scores.

Audit with feedback (AWF) as a CME tool for radiation oncologists (ROs): evaluation of efficacy, perception, and cost-effectiveness

International Nuclear Information System (INIS)

Shakespeare, T.P.; Mukherjee, R.K.; Lu, J.J.; Wynne, C.J.; Back, M.F.

2003-01-01

Meta-analyses demonstrate Audit with Feedback (AWF) is effective CME, however educational efficacy for ROs is unknown. We evaluated an AWF CME intervention for ROs, determining efficacy, cost-effectiveness and participant satisfaction. CME program: CME incorporated fortnightly random patient chart audit, scoring management adequacy via checklist. Scores were presented at a same-day institutional meeting, and case management discussed. Senior peers provided educational feedback. RO behavior/performance was evaluated via chart review of new patients seen 2 months before commencement of CME (T0), and after 12 months of CME (T1). A validated instrument scored 19 items as '0' (inadequate/inappropriate) or '1' (adequate/appropriate). Comparisons of mean point-score for 10 behaviour items targeted by the CME AWF checklist, 3 non-targeted behaviour items, and 6 performance items were made; also percent charts achieving a '1' for each item at T0 and T1. A 14-item participant questionnaire measured satisfaction before and after efficacy results were known. Responses scored from 0 (very dissatisfied) to 5 (very satisfied), then averaged. Annual cost and cost-per-point gained incorporated salaries of organizers/ participants, and consumables. 113 and 118 charts were evaluated at T0 and T1. Mean score of targeted behavior improved between T0 and T1 (8.7 to 9.2 out of 10,p=0.0001), with no significant improvement for non-targeted behavior/performance items. Improvement occurred for 'Decision for treatment' (non-targeted; percent charts scoring '1' increased from 84% to 92%,p=0.08), and targeted items 'Letter to referrer' (53% to 66%,p=0.04), 'Treatment intent' (54 to 77%,p=0.0002), 'Laterality doublet' (91 to 98%, p=0.04), and 'Isodose-plan signed' (94 to 100%,p=0.006). Improvements varied between ROs. Participant satisfaction was positive, increasing from 3.2 to 3.7 after efficacy result distribution (p=0.0001). Annual costs and cost-per-point gained were $AUD13,820 and $27

Low cost, high yield IFE reactors: Revisiting Velikhov's vaporizing blankets

International Nuclear Information System (INIS)

Logan, B.G.

1992-01-01

The performance (efficiency and cost) of IFE reactors using MHD conversion is explored for target blanket shells of various materials vaporized and ionized by high fusion yields (5 to 500 GJ). A magnetized, prestressed reactor chamber concept is modeled together with previously developed models for the Compact Fusion Advanced Rankine II (CFARII) MHD Balance-of-Plant (BoP). Using conservative 1-D neutronics models, high fusion yields (20 to 80 GJ) are found necessary to heat Flibe, lithium, and lead-lithium blankets to MHD plasma temperatures, at initial solid thicknesses sufficient to capture most of the fusion yield. Advanced drivers/targets would need to be developed to achieve a ''Bang per Buck'' figure-of-merit approx-gt 20 to 40 joules yield per driver $ for this scheme to be competitive with these blanket materials. Alternatively, more realistic neutronics models and better materials such as lithium hydride may lower the minimum required yields substantially. The very low CFARII BoP costs (contributing only 3 mills/kWehr to CoE) allows this type of reactor, given sufficient advances that non-driver costs dominate, to ultimately produce electricity at a much lower cost than any current nuclear plant

Basic factors to forecast maintenance cost and failure processes for nuclear power plants

International Nuclear Information System (INIS)

Popova, Elmira; Yu, Wei; Kee, Ernie; Sun, Alice; Richards, Drew; Grantom, Rick

2006-01-01

Two types of maintenance interventions are usually administered at nuclear power plants: planned and corrective. The cost incurred includes the labor (manpower) cost, cost for new parts, or emergency order of expensive items. At the plant management level there is a budgeted amount of money to be spent every year for such operations. It is very important to have a good forecast for this cost since unexpected events can trigger it to a very high level. In this research we present a statistical factor model to forecast the maintenance cost for the incoming month. One of the factors is the expected number of unplanned (due to failure) maintenance interventions. We introduce a Bayesian model for the failure rate of the equipment, which is input to the cost forecasting model. The importance of equipment reliability and prediction in the commercial nuclear power plant is presented along with applicable governmental and industry organization requirements. A detailed statistical analysis is performed on a set of maintenance cost and failure data gathered at the South Texas Project Nuclear Operating Company (STPNOC) in Bay City, Texas, USA

A high-performance, low-cost, leading edge discriminator

Indian Academy of Sciences (India)

Abstract. A high-performance, low-cost, leading edge discriminator has been designed with a timing performance comparable to state-of-the-art, commercially available discrim- inators. A timing error of 16 ps is achieved under ideal operating conditions. Under more realistic operating conditions the discriminator displays a ...

Macrostructural Treatment of Multi-word Lexical Items

Directory of Open Access Journals (Sweden)

Alenka Vrbinc

2011-05-01

Full Text Available The paper discusses the macrostructural treatment of multi-word lexical items in mono- and bilingual dictionaries. First, the classification of multi-word lexical items is presented, and special attention is paid to the discussion of compounds – a specific group of multi-word lexical items that is most commonly afforded headword status but whose inclusion in the headword list may also depend on spelling. Then the inclusion of multi-word lexical items in monolingual dictionaries is dealt with in greater detail, while the results of a short survey on the inclusion of five randomly chosen multi-word lexical items in seven English monolingual dictionaries are presented. The proposals as to how to treat these five multi-word lexical items in bilingual dictionaries are presented in the section about the inclusion of multi-word lexical items in bilingual dictionaries. The conclusion is that it is most important to take the users’ needs into consideration and to make any dictionary as user friendly as possible.

Losing Items in the Psychogeriatric Nursing Home

Directory of Open Access Journals (Sweden)

J. van Hoof PhD

2016-09-01

Full Text Available Introduction: Losing items is a time-consuming occurrence in nursing homes that is ill described. An explorative study was conducted to investigate which items got lost by nursing home residents, and how this affects the residents and family caregivers. Method: Semi-structured interviews and card sorting tasks were conducted with 12 residents with early-stage dementia and 12 family caregivers. Thematic analysis was applied to the outcomes of the sessions. Results: The participants stated that numerous personal items and assistive devices get lost in the nursing home environment, which had various emotional, practical, and financial implications. Significant amounts of time are spent on trying to find items, varying from 1 hr up to a couple of weeks. Numerous potential solutions were identified by the interviewees. Discussion: Losing items often goes together with limitations to the participation of residents. Many family caregivers are reluctant to replace lost items, as these items may get lost again.

Development of the Open Items Tracking System

International Nuclear Information System (INIS)

Riggi, V.

1994-01-01

The West Valley Demonstration Project, located on the site of the only commercial nuclear fuel reprocessing facility to have operated in USA, has the directed objectives of solidifying the high-level radioactive waste into a durable, solid form for shipment; decontaminating and decommissioning the tanks and facilities; and disposing of the resulting low-level and transuranic wastes. Since an escalating trend of open work items was noticed in the Fall of 1988, and there was no control mechanism for tracking and closing the open items, a Work Control System was developed for this purpose. It is self-contained system on a mainframe ARTEMIS 9000, which tracks, monitors, and closes out external commitments in a timely manner. Audits, surveillances, site appraisals, preventive maintenance, instrument calibration recall, and scheduling are covered

Many Mobile Health Apps Target High-Need, High-Cost Populations, But Gaps Remain.

Science.gov (United States)

Singh, Karandeep; Drouin, Kaitlin; Newmark, Lisa P; Lee, JaeHo; Faxvaag, Arild; Rozenblum, Ronen; Pabo, Erika A; Landman, Adam; Klinger, Elissa; Bates, David W

2016-12-01

With rising smartphone ownership, mobile health applications (mHealth apps) have the potential to support high-need, high-cost populations in managing their health. While the number of available mHealth apps has grown substantially, no clear strategy has emerged on how providers should evaluate and recommend such apps to patients. Key stakeholders, including medical professional societies, insurers, and policy makers, have largely avoided formally recommending apps, which forces patients to obtain recommendations from other sources. To help stakeholders overcome barriers to reviewing and recommending apps, we evaluated 137 patient-facing mHealth apps-those intended for use by patients to manage their health-that were highly rated by consumers and recommended by experts and that targeted high-need, high-cost populations. We found that there is a wide variety of apps in the marketplace but that few apps address the needs of the patients who could benefit the most. We also found that consumers' ratings were poor indications of apps' clinical utility or usability and that most apps did not respond appropriately when a user entered potentially dangerous health information. Going forward, data privacy and security will continue to be major concerns in the dissemination of mHealth apps. Project HOPE—The People-to-People Health Foundation, Inc.

‘Forget me (not?’ – Remembering forget-items versus un-cued items in directed forgetting

Directory of Open Access Journals (Sweden)

Bastian eZwissler

2015-11-01

Full Text Available Humans need to be able to selectively control their memories. Here, we investigate the underlying processes in item-method directed forgetting and compare the classic active memory cues in this paradigm with a passive instruction. Typically, individual items are presented and each is followed by either a forget- or remember-instruction. On a surprise test of all items, memory is then worse for to-be-forgotten items (TBF compared to to-be-remembered items (TBR. This is thought to result from selective rehearsal of TBR, or from active inhibition of TBF, or from both. However, evidence suggests that if a forget instruction initiates active processing, paradoxical effects may also arise. To investigate the underlying mechanisms, four experiments were conducted where un-cued items (UI were introduced and recognition performance was compared between TBR, TBF and UI stimuli. Accuracy was encouraged via a performance-dependent monetary bonus. Across all experiments, including perceptually fully matched variants, memory accuracy for TBF was reduced compared to TBR, but better than for UI. Moreover, participants used a more conservative response criterion when responding to TBF stimuli. Thus, ironically, the F cue results in active processing, but this does not have inhibitory effects that would impair recognition memory beyond a un-cued baseline condition. This casts doubts on inhibitory accounts of item-method directed forgetting and is also difficult to reconcile with pure selective rehearsal of TBR. While the F-cue does induce active processing, this does not result in particularly successful forgetting. The pattern seems most consistent with the notion of ironic processing.

Cheap imports next ordeal for Europe's high-cost producers

International Nuclear Information System (INIS)

Chynoweth, E.

1993-01-01

About one-third of Europe's 34 cracker and downstream units lost money in the final quarter of 1992, says Chem Systems (London). Average return on capital employed is negative - at the same level as in the gloomy days of the early 1980s - yet average operating rates are 80% now, compared with 65% a decade ago. Margins at what Chem Systems calls leader cracks (naphtha-based units that use good modern practices) are DM42/m.t. ethylene, DM100/m.t. less than they were in 1991. The consultant firm's recent report, European Petrochemical Strategy in the 1990s, suggests closure of 5%-10% of high-cost production. But, Chem Systems director Roger Longley states: We are not advocating wholesale closure. There are a small number (of plants) where additional investment would not payback that would be economical to shut. Cost reduction through mergers and acquisitions and operational changes is much more important, especially from an international aspect, Longley says. One thing people do not fully appreciate is that Europe is a high-cost region for petrochemical production, he adds. Traditionally, Europe exports 5% of its ethylene output, now it needs to tolerate cheap imports

Latent Trait Theory Applications to Test Item Bias Methodology. Research Memorandum No. 1.

Science.gov (United States)

Osterlind, Steven J.; Martois, John S.

This study discusses latent trait theory applications to test item bias methodology. A real data set is used in describing the rationale and application of the Rasch probabilistic model item calibrations across various ethnic group populations. A high school graduation proficiency test covering reading comprehension, writing mechanics, and…

Software for automated tracking of open items at NRC

International Nuclear Information System (INIS)

DeWispelare, A.R.; Mackin, P.C.; Johnson, R.L.

1995-01-01

The Open Item Tracking System (OITS) was developed in response to the Nuclear Regulatory Commission (NRC) need for a reliable, easy to use automated database system, to track all open (awaiting resolution) items related to regulatory, institutional, and technical uncertainties for the Department of Energy's (DOE's) high-level waste (HLW) disposal program. The OITS system was integrated with the Regulatory Program Database (RPD) Version 1.1, resulting in the RPD/OITS Version 2.0 system. RPD/OITS is a network bases system with client server architecture and a graphical user interface. This paper outlines the system and results of its implementation

Considerations on a Cost Model for High-Field Dipole Arc Magnets for FCC

CERN Document Server

AUTHOR|(CDS)2078700; Durante, Maria; Lorin, Clement; Martinez, Teresa; Ruuskanen, Janne; Salmi, Tiina; Sorbi, Massimo; Tommasini, Davide; Toral, Fernando

2017-01-01

In the frame of the European Circular Collider (EuroCirCol), a conceptual design study for a post-Large Hadron Collider (LHC) research infrastructure based on an energy-frontier 100 TeV circular hadron collider [1]–[3], a cost model for the high-field dipole arc magnets is being developed. The aim of the cost model in the initial design phase is to provide the basis for sound strategic decisions towards cost effective designs, in particular: (A) the technological choice of superconducting material and its cost, (B) the target performance of Nb$_{3}$Sn superconductor, (C) the choice of operating temperature (D) the relevant design margins and their importance for cost, (E) the nature and extent of grading, and (F) the aperture’s influence on cost. Within the EuroCirCol study three design options for the high field dipole arc magnets are under study: cos − θ [4], block [5], and common-coil [6]. Here, in the advanced design phase, a cost model helps to (1) identify the cost drivers and feed-back this info...

Considerations on a Cost Model for High-Field Dipole Arc Magnets for FCC

CERN Document Server

AUTHOR|(CDS)2078700; Durante, Maria; Lorin, Clement; Martinez, Teresa; Ruuskanen, Janne; Salmi, Tiina; Sorbi, Massimo; Tommasini, Davide; Toral, Fernando

2017-01-01

In the frame of the European Circular Collider (EuroCirCol), a conceptual design study for a post-Large Hadron Collider (LHC) research infrastructure based on an energy-frontier 100 TeV circular hadron collider [1]–[3], a cost model for the high-field dipole arc magnets is being developed. The aim of the cost model in the initial design phase is to provide the basis for sound strategic decisions towards cost effective designs, in particular: (A) the technological choice of superconducting material and its cost, (B) the target performance of Nb3Sn superconductor, (C) the choice of operating temperature (D) the relevant design margins and their importance for cost, (E) the nature and extent of grading, and (F) the aperture’s influence on cost. Within the EuroCirCol study three design options for the high field dipole arc magnets are under study: cos − θ [4], block [5], and common-coil [6]. Here, in the advanced design phase, a cost model helps to (1) identify the cost drivers and feed-back this informati...

Second Generation Novel High Temperature Commercial Receiver & Low Cost High Performance Mirror Collector for Parabolic Solar Trough

Energy Technology Data Exchange (ETDEWEB)

Stettenheim, Joel [Norwich Technologies, White River Junction, VT (United States)

2016-02-29

Norwich Technologies (NT) is developing a disruptively superior solar field for trough concentrating solar power (CSP). Troughs are the leading CSP technology (85% of installed capacity), being highly deployable and similar to photovoltaic (PV) systems for siting. NT has developed the SunTrap receiver, a disruptive alternative to vacuum-tube concentrating solar power (CSP) receivers, a market currently dominated by the Schott PTR-70. The SunTrap receiver will (1) operate at higher temperature (T) by using an insulated, recessed radiation-collection system to overcome the energy losses that plague vacuum-tube receivers at high T, (2) decrease acquisition costs via simpler structure, and (3) dramatically increase reliability by eliminating vacuum. It offers comparable optical efficiency with thermal loss reduction from ≥ 26% (at presently standard T) to ≥ 55% (at high T), lower acquisition costs, and near-zero O&M costs.

Segmentation of low‐cost high efficiency oxide‐based thermoelectric materials

DEFF Research Database (Denmark)

Le, Thanh Hung; Van Nong, Ngo; Linderoth, Søren

2015-01-01

Thermoelectric (TE) oxide materials have attracted great interest in advanced renewable energy research owing to the fact that they consist of abundant elements, can be manufactured by low-cost processing, sustain high temperatures, be robust and provide long lifetime. However, the low conversion...... efficiency of TE oxides has been a major drawback limiting these materials to broaden applications. In this work, theoretical calculations are used to predict how segmentation of oxide and semimetal materials, utilizing the benefits of both types of materials, can provide high efficiency, high temperature...... oxide-based segmented legs. The materials for segmentation are selected by their compatibility factors and their conversion efficiency versus material cost, i.e., “efficiency ratio”. Numerical modelling results showed that conversion efficiency could reach values of more than 10% for unicouples using...

The influence of item order on intentional response distortion in the assessment of high potentials: assessing pilot applicants.

Science.gov (United States)

Khorramdel, Lale; Kubinger, Klaus D; Uitz, Alexander

2014-04-01

An experiment was conducted to investigate the effects of item order and questionnaire content on faking good or intentional response distortion. It was hypothesized that intentional response distortion would either increase towards the end of a long questionnaire, as learning effects might make it easier to adjust responses to a faking good schema, or decrease because applicants' will to distort responses is reduced if the questionnaire lasts long enough. Furthermore, it was hypothesized that certain types of questionnaire content are especially vulnerable to response distortion. Eighty-four pre-selected pilot applicants filled out a questionnaire consisting of 516 items including items from the NEO five factor inventory (NEO FFI), NEO personality inventory revised (NEO PI-R) and business-focused inventory of personality (BIP). The positions of the items were varied within the applicant sample to test if responses are affected by item order, and applicants' response behaviour was additionally compared to that of volunteers. Applicants reported significantly higher mean scores than volunteers, and results provide some evidence of decreased faking tendencies towards the end of the questionnaire. Furthermore, it could be demonstrated that lower variances or standard deviations in combination with appropriate (often higher) mean scores can serve as an indicator for faking tendencies in group comparisons, even if effects are not significant. © 2013 International Union of Psychological Science.

Comparison of the Availability and Cost of Foods Compatible With a Renal Diet Versus an Unrestricted Diet Using the Nutrition Environment Measures Survey.

Science.gov (United States)

Sullivan, Catherine M; Pencak, Julie A; Freedman, Darcy A; Huml, Anne M; León, Janeen B; Nemcek, Jeanette; Theurer, Jacqueline; Sehgal, Ashwini R

2017-05-01

Hemodialysis patients' ability to access food that is both compatible with a renal diet and affordable is affected by the local food environment. Comparisons of the availability and cost of food items suitable for the renal diet versus a typical unrestricted diet were completed using the standard Nutrition Environment Measures Survey and a renal diet-modified Nutrition Environment Measures Survey. Cross-sectional study. Twelve grocery stores in Northeast Ohio. Availability and cost of food items in 12 categories. The mean total number of food items available differed significantly (P ≤ .001) between the unrestricted diet (38.9 ± 4.5) and renal diet (32.2 ± 4.7). The mean total cost per serving did not differ significantly (P = 0.48) between the unrestricted diet ($5.67 ± 2.50) and renal diet ($5.76 ± 2.74). The availability of renal diet food items is significantly less than that of unrestricted diet food items, but there is no difference in the cost of items that are available in grocery stores. Further work is needed to determine how to improve the food environment for patients with chronic diseases. Copyright © 2017 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

Profitability indicators of milk production cost center in intensive systems of production

Directory of Open Access Journals (Sweden)

Glauber dos Santos

2012-01-01

Full Text Available The objective was to estimate some profitability indicators of dairy cost center farms with a high volume of daily production in feedlot. The Intended was also to identify the components that had the greatest influence on the operational cost. We used data from three milk systems production, with the origin of the purebred Holsteins. It was considered as a milk cost center production all expenses related in lactating and dry cows. The methodology used total cost and operating cost in profitability analysis. A production system, by presenting gross margin, net positive result, was able to produce short, medium and long term. Another production system had a positive gross margin and net, with conditions to survive in the short and medium term. Finally, the third system of production has shown a negative gross margin presenting decapitalizing and entering into debt, as revenues were not enough to pay operating expenses even effective. The component items of the effective operational cost that exercised higher “impact” cost and income from milk were, in decreasing order, the feeding, labor, miscellaneous expenses, sanitation, energy, milking, reproduction, equipment rental, BST and taxes.

Melanoma costs: a dynamic model comparing estimated overall costs of various clinical stages.

Science.gov (United States)

Alexandrescu, Doru Traian

2009-11-15

The rapidly increasing incidence of melanoma occurs at the same time as an increase in general healthcare costs, particularly the expenses associated with cancer care. Previous cost estimates in melanoma have not utilized a dynamic model considering the evolution of the disease and have not integrated the multiple costs associated with different aspects of medical interventions and patient-related factors. Futhermore, previous calculations have not been updated to reflect the modern tendencies in healthcare costs. We designed a comprehensive model of expenses in melanoma that considers the dynamic costs generated by the natural progression of the disease, which produces costs associated with treatment, surveillance, loss of income, and terminal care. The complete range of initial clinical (TNM) stages of the disease and initial tumor stages were analyzed in this model and the total healthcare costs for the five years following melanoma presentation at each particular stage were calculated. We have observed dramatic incremental total costs associated with progressively higher initial stages of the disease, ranging from a total of $4,648.48 for in situ tumors to $159,808.17 for Stage IV melanoma. By stage, early lesions associate 30-55 percent of their costs for the treatment of the primary tumor, due to a low rate of recurrence (local, regional, or distant), which limits the need for additional interventions. For in situ melanoma, T1a, and T1b, surveillance is an important contributor to the medical costs, accounting for more than 25 percent of the total cost over 5 years. In contrast, late lesions incur a much larger proportion of their associated costs (up to 80-85%) from the diagnosis and treatment of metastatic disease because of the increased propensity of those lesions to disseminate. This cost increases with increasing tumor stage (from $2,442.17 for T1a to $6,678.00 for T4b). The most expensive items in the medical care of patients with melanoma consist of

Item selection via Bayesian IRT models.

Science.gov (United States)

Arima, Serena

2015-02-10

With reference to a questionnaire that aimed to assess the quality of life for dysarthric speakers, we investigate the usefulness of a model-based procedure for reducing the number of items. We propose a mixed cumulative logit model, which is known in the psychometrics literature as the graded response model: responses to different items are modelled as a function of individual latent traits and as a function of item characteristics, such as their difficulty and their discrimination power. We jointly model the discrimination and the difficulty parameters by using a k-component mixture of normal distributions. Mixture components correspond to disjoint groups of items. Items that belong to the same groups can be considered equivalent in terms of both difficulty and discrimination power. According to decision criteria, we select a subset of items such that the reduced questionnaire is able to provide the same information that the complete questionnaire provides. The model is estimated by using a Bayesian approach, and the choice of the number of mixture components is justified according to information criteria. We illustrate the proposed approach on the basis of data that are collected for 104 dysarthric patients by local health authorities in Lecce and in Milan. Copyright © 2014 John Wiley & Sons, Ltd.

Serial recall, word frequency, and mixed lists: the influence of item arrangement.

Science.gov (United States)

Miller, Leonie M; Roodenrys, Steven

2012-11-01

Studies of the effect of word frequency in the serial recall task show that lists of high-frequency words are better recalled than lists of low-frequency words; however, when high- and low-frequency words are alternated within a list, there is no difference in the level of recall for the two types of words, and recall is intermediate between lists of pure frequency. This pattern has been argued to arise from the development of a network of activated long-term representations of list items that support the redintegration of all list items in a nondirectional and nonspecific way. More recently, it has been proposed that the frequency effect might be a product of the coarticulation of items at word boundaries and their influence on rehearsal rather than a consequence of memory representations. The current work examines recall performance in mixed lists of an equal number of high- and low-frequency items arranged in contiguous segments (i.e., HHHLLL and LLLHHH), under quiet and articulatory suppression conditions, to test whether the effect is (a) nondirectional and (b) dependent on articulatory processes. These experiments demonstrate that neither explanation is satisfactory, although the results suggest that the effect is mnemonic. A language-based approach to short-term memory is favored with emphasis on the role of speech production processes at output.

Item response theory analysis of the life orientation test-revised: age and gender differential item functioning analyses.

Science.gov (United States)

Steca, Patrizia; Monzani, Dario; Greco, Andrea; Chiesi, Francesca; Primi, Caterina

2015-06-01

This study is aimed at testing the measurement properties of the Life Orientation Test-Revised (LOT-R) for the assessment of dispositional optimism by employing item response theory (IRT) analyses. The LOT-R was administered to a large sample of 2,862 Italian adults. First, confirmatory factor analyses demonstrated the theoretical conceptualization of the construct measured by the LOT-R as a single bipolar dimension. Subsequently, IRT analyses for polytomous, ordered response category data were applied to investigate the items' properties. The equivalence of the items across gender and age was assessed by analyzing differential item functioning. Discrimination and severity parameters indicated that all items were able to distinguish people with different levels of optimism and adequately covered the spectrum of the latent trait. Additionally, the LOT-R appears to be gender invariant and, with minor exceptions, age invariant. Results provided evidence that the LOT-R is a reliable and valid measure of dispositional optimism. © The Author(s) 2014.

Cost optimization of load carrying thin-walled precast high performance concrete sandwich panels

DEFF Research Database (Denmark)

Hodicky, Kamil; Hansen, Sanne; Hulin, Thomas

2015-01-01

and HPCSP’s geometrical parameters as well as on material cost function in the HPCSP design. Cost functions are presented for High Performance Concrete (HPC), insulation layer, reinforcement and include labour-related costs. The present study reports the economic data corresponding to specific manufacturing......The paper describes a procedure to find the structurally and thermally efficient design of load-carrying thin-walled precast High Performance Concrete Sandwich Panels (HPCSP) with an optimal economical solution. A systematic optimization approach is based on the selection of material’s performances....... The solution of the optimization problem is performed in the computer package software Matlab® with SQPlab package and integrates the processes of HPCSP design, quantity take-off and cost estimation. The proposed optimization process outcomes in complex HPCSP design proposals to achieve minimum cost of HPCSP....

A Multiple Items EPQ/EOQ Model for a Vendor and Multiple Buyers System with Considering Continuous and Discrete Demand Simultaneously

Science.gov (United States)

Jonrinaldi; Rahman, T.; Henmaidi; Wirdianto, E.; Zhang, D. Z.

2018-03-01

This paper proposed a mathematical model for multiple items Economic Production and Order Quantity (EPQ/EOQ) with considering continuous and discrete demand simultaneously in a system consisting of a vendor and multiple buyers. This model is used to investigate the optimal production lot size of the vendor and the number of shipments policy of orders to multiple buyers. The model considers the multiple buyers’ holding cost as well as transportation cost, which minimize the total production and inventory costs of the system. The continuous demand from any other customers can be fulfilled anytime by the vendor while the discrete demand from multiple buyers can be fulfilled by the vendor using the multiple delivery policy with a number of shipments of items in the production cycle time. A mathematical model is developed to illustrate the system based on EPQ and EOQ model. Solution procedures are proposed to solve the model using a Mixed Integer Non Linear Programming (MINLP) and algorithm methods. Then, the numerical example is provided to illustrate the system and results are discussed.

High cost of nuclear power plants

International Nuclear Information System (INIS)

Bassett, C.

1978-01-01

Retroactive safety standards were found to account for over half the costs of a nuclear power plant and point up the need for an effective cost-benefit analysis of changes made by the Nuclear Regulatory Commission after construction has started. The author compared the Davis-Besse Unit No. 1 construction-cost estimates with the final-cost increases during a rate-case investigation in Ohio. He presents data furnished for ten of the largest construction contracts to illustrate the cost increases involving fixed hardware and intensive labor. The situation was found to repeat with other utilities across the country even though safeguards against irresponsible low bidding were introduced. Low bidding was found to continue, encouraged by the need for retrofitting to meet regulation changes. The average cost per kilowatt of major light-water reactors is shown to have increased from $171 in 1970 to $555 in 1977, while construction duration increased from 43.4 to 95.6 months during the same period

Sharing the cost of risky projects

DEFF Research Database (Denmark)

Hougaard, Jens Leth; Moulin, Hervé

2018-01-01

Users share the cost of unreliable non-rival projects (items). For instance, industry partners pay today for R&D that may or may not deliver a cure to some viruses, agents pay for the edges of a network that will cover their connectivity needs, but the edges may fail, etc. Each user has a binary...

[Evolution of reimbursement of high-cost anticancer drugs: Financial impact within a university hospital].

Science.gov (United States)

Baudouin, Amandine; Fargier, Emilie; Cerruti, Ariane; Dubromel, Amélie; Vantard, Nicolas; Ranchon, Florence; Schwiertz, Vérane; Salles, Gilles; Souquet, Pierre-Jean; Thomas, Luc; Bérard, Frédéric; Nancey, Stéphane; Freyer, Gilles; Trillet-Lenoir, Véronique; Rioufol, Catherine

2017-06-01

In the context of health expenses control, reimbursement of high-cost medicines with a 'minor' or 'nonexistent' improvement in actual health benefit evaluated by the Haute Autorité de santé is revised by the decree of March 24, 2016 related to the procedure and terms of registration of high-cost pharmaceutical drugs. This study aims to set up the economic impact of this measure. A six months retrospective study was conducted within a French university hospital from July 1, 2015 to December 31, 2015. For each injectable high-cost anticancer drug prescribed to a patient with cancer, the therapeutic indication, its status in relation to the marketing authorization and the associated improvement in actual health benefit were examined. The total costs of these treatments, the cost per type of indication and, in the case of marketing authorization indications, the cost per improvement in actual health benefit were evaluated considering that all drugs affected by the decree would be struck off. Over six months, 4416 high-cost injectable anticancer drugs were prescribed for a total cost of 4.2 million euros. The costs of drugs with a minor or nonexistent improvement in actual benefit and which comparator is not onerous amount 557,564 euros. The reform of modalities of inscription on the list of onerous drugs represents a significant additional cost for health institutions (1.1 million euros for our hospital) and raises the question of the accessibility to these treatments for cancer patients. Copyright © 2017 Société Française du Cancer. Published by Elsevier Masson SAS. All rights reserved.

Universal Authenticated Item Monitoring System (AIMS) second generation equipment

International Nuclear Information System (INIS)

Schoeneman, J.L.; Baumann, M.J.; Fox, L.J.; Jenkins, C.D.; Perlinsk, A.W.

1992-01-01

Sandia National Laboratories (SNL) is in the final stages of developing a Universal Authenticated Item Monitoring System (AIMS). When completed, AIMS will provide applicable agencies in the US government, and those in the International arena, with a secure and convenient method of monitoring the physical status of selected items. The benefit derived from this development activity will be the commercial availability of an item monitoring system with the capability for ''quick set-up'' monitoring, as well as long-term unattended monitoring. The AIMS includes a variety of sensors, a robust and authenticated radio frequency (RF) communication link, a Receiver Processing Unit (RPU), and an inspector-friendly personal computer (PC) interface for collecting, sorting, viewing and archiving pertinent event histories. The system will provide the capability to monitor selected items in a real-time mode, a remotely interrogated mode, and a stand-alone, unattended data collection mode. The sensor suite under development includes advanced motion sensors, interior volumetric intrusion sensors, Re-usable, In-situ Verifiable Authenticated (RIVA) fiber-optic seal sensors, generic utility sensors (to accommodate contact closure inputs), and radiation and environmental sensors. A new generation authentication algorithm recently has been developed that provides a high degree of system security 121. The AIMS has potential safeguards applications in the areas of arms control and treaty verification military asset control, International Atomic Energy Agency (IAEA) and Euratom safeguards verification activities, as well as domestic nuclear safeguard activities. Commercial applications could include high-value inventory control and security systems. This paper describes the second-generation AIMS along with its recently expanded sensor suite and enhanced data collection capabilities

Software Note: Using BILOG for Fixed-Anchor Item Calibration

Science.gov (United States)

DeMars, Christine E.; Jurich, Daniel P.

2012-01-01

The nonequivalent groups anchor test (NEAT) design is often used to scale item parameters from two different test forms. A subset of items, called the anchor items or common items, are administered as part of both test forms. These items are used to adjust the item calibrations for any differences in the ability distributions of the groups taking…

Inventions on presenting textual items in Graphical User Interface

OpenAIRE

Mishra, Umakant

2014-01-01

Although a GUI largely replaces textual descriptions by graphical icons, the textual items are not completely removed. The textual items are inevitably used in window titles, message boxes, help items, menu items and popup items. Textual items are necessary for communicating messages that are beyond the limitation of graphical messages. However, it is necessary to harness the textual items on the graphical interface in such a way that they complement each other to produce the best effect. One...

Science Library of Test Items. Volume Eighteen. A Collection of Multiple Choice Test Items Relating Mainly to Chemistry.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

Science Library of Test Items. Volume Seventeen. A Collection of Multiple Choice Test Items Relating Mainly to Biology.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

Science Library of Test Items. Volume Nineteen. A Collection of Multiple Choice Test Items Relating Mainly to Geology.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

Three-item Direct Observation Screen (TIDOS) for autism spectrum disorder.

Science.gov (United States)

Oner, Pinar; Oner, Ozgur; Munir, Kerim

2014-08-01

We compared ratings on the Three-Item Direct Observation Screen test for autism spectrum disorders completed by pediatric residents with the Social Communication Questionnaire parent reports as an augmentative tool for improving autism spectrum disorder screening performance. We examined three groups of children (18-60 months) comparable in age (18-24 month, 24-36 month, 36-60 preschool subgroups) and gender distribution: n = 86 with Diagnostic and Statistical Manual of Mental Disorders (4th ed., text rev.) autism spectrum disorders; n = 76 with developmental delay without autism spectrum disorders; and n = 97 with typical development. The Three-Item Direct Observation Screen test included the following (a) Joint Attention, (b) Eye Contact, and (c) Responsiveness to Name. The parent Social Communication Questionnaire ratings had a sensitivity of .73 and specificity of .70 for diagnosis of autism spectrum disorders. The Three-Item Direct Observation Screen test item Joint Attention had a sensitivity of .82 and specificity of .90, Eye Contact had a sensitivity of .89 and specificity of .91, and Responsiveness to Name had a sensitivity of .67 and specificity of .87. In the Three-Item Direct Observation Screen test, having at least one of the three items positive had a sensitivity of .95 and specificity of .85. Age, diagnosis of autism spectrum disorder, and developmental level were important factors affecting sensitivity and specificity. The results indicate that augmentation of autism spectrum disorder screening by observational items completed by trained pediatric-oriented professionals can be a highly effective tool in improving screening performance. If supported by future population studies, the results suggest that primary care practitioners will be able to be trained to use this direct procedure to augment screening for autism spectrum disorders in the community. © The Author(s) 2013.

Piecewise Polynomial Fitting with Trend Item Removal and Its Application in a Cab Vibration Test

Directory of Open Access Journals (Sweden)

Wu Ren

2018-01-01

Full Text Available The trend item of a long-term vibration signal is difficult to remove. This paper proposes a piecewise integration method to remove trend items. Examples of direct integration without trend item removal, global integration after piecewise polynomial fitting with trend item removal, and direct integration after piecewise polynomial fitting with trend item removal were simulated. The results showed that direct integration of the fitted piecewise polynomial provided greater acceleration and displacement precision than the other two integration methods. A vibration test was then performed on a special equipment cab. The results indicated that direct integration by piecewise polynomial fitting with trend item removal was highly consistent with the measured signal data. However, the direct integration method without trend item removal resulted in signal distortion. The proposed method can help with frequency domain analysis of vibration signals and modal parameter identification for such equipment.

Feed mechanism and method for feeding minute items

Science.gov (United States)

Stringer, Timothy Kent [Bucyrus, KS; Yerganian, Simon Scott [Lee's Summit, MO

2009-10-20

A feeding mechanism and method for feeding minute items, such as capacitors, resistors, or solder preforms. The mechanism is adapted to receive a plurality of the randomly-positioned and randomly-oriented extremely small or minute items, and to isolate, orient, and position one or more of the items in a specific repeatable pickup location wherefrom they may be removed for use by, for example, a computer-controlled automated assembly machine. The mechanism comprises a sliding shelf adapted to receive and support the items; a wiper arm adapted to achieve a single even layer of the items; and a pushing arm adapted to push the items into the pickup location. The mechanism can be adapted for providing the items with a more exact orientation, and can also be adapted for use in a liquid environment.

A Comparison of Item Exposure Control Procedures with the Generalized Partial Credit Model

Science.gov (United States)

Sanchez, Edgar Isaac

2008-01-01

To enhance test security of high stakes tests, it is vital to understand the way various exposure control strategies function under various IRT models. To that end the present dissertation focused on the performance of several exposure control strategies under the generalized partial credit model with an item pool of 100 and 200 items. These…

Sulphur sales should bear processing cost

Energy Technology Data Exchange (ETDEWEB)

Jones, W

1969-01-20

In this analysis, all the pertinent costs of processing sulfur from sour gas are allocated to one item, the sulfur produced from the sour gas. Therefore, in the graphical representations, the sour gas fed to the amine unit was considered to be dry sour gas containing no carbon dioxide. Cases were considered for increasing percentages of hydrogen sulfide. Costs of amine units and sulfur units were estimated and updated from the literature both for capital investment and operating costs for plants sized to produce sulfur at rates ranging from 20 to 500 long tons per day. The figures shown on the graph for unit costs confirm that the sulfur industry in W. Canada has been selling its sulfur below cost until recently. The conditioning of the natural gas bore the cost of producing sulfur, a sign of unhealthy sulfur markets. Producers would be wise to replenish their sulfur stockpiles to obtain stable marketing conditions at good prices.

The Effect of the Existence of Defective Items in Assembly Operations

OpenAIRE

Eben-Chaime , Moshe

2014-01-01

Part 1: Knowledge-Based Performance Improvement; International audience; Quality is a principle issue in production management (PM). No process is perfect and the production of defective items is unavoidable. Very few studies regard the effect of the existence of defective items (EEDI) in production processes. Further, quality has been studied in isolation to high extent, of other PM domains. In this study, defect rates together with the assembly ratios of the bill of material are embedded in...

Maximising profits for an EPQ model with unreliable machine and rework of random defective items

Science.gov (United States)

Pal, Brojeswar; Sankar Sana, Shib; Chaudhuri, Kripasindhu

2013-03-01

This article deals with an economic production quantity (EPQ) model in an imperfect production system. The production system may undergo in 'out-of-control' state from 'in-control' state, after a certain time that follows a probability density function. The density function varies with reliability of the machinery system that may be controlled by new technologies, investing more costs. The defective items produced in 'out-of-control' state are reworked at a cost just after the regular production time. Occurrence of the 'out-of-control' state during or after regular production-run time is analysed and also graphically illustrated separately. Finally, an expected profit function regarding the inventory cost, unit production cost and selling price is maximised analytically. Sensitivity analysis of the model with respect to key parameters of the system is carried out. Two numerical examples are considered to test the model and one of them is illustrated graphically.

Memory for Items and Relationships among Items Embedded in Realistic Scenes: Disproportionate Relational Memory Impairments in Amnesia

Science.gov (United States)

Hannula, Deborah E.; Tranel, Daniel; Allen, John S.; Kirchhoff, Brenda A.; Nickel, Allison E.; Cohen, Neal J.

2014-01-01

Objective The objective of this study was to examine the dependence of item memory and relational memory on medial temporal lobe (MTL) structures. Patients with amnesia, who either had extensive MTL damage or damage that was relatively restricted to the hippocampus, were tested, as was a matched comparison group. Disproportionate relational memory impairments were predicted for both patient groups, and those with extensive MTL damage were also expected to have impaired item memory. Method Participants studied scenes, and were tested with interleaved two-alternative forced-choice probe trials. Probe trials were either presented immediately after the corresponding study trial (lag 1), five trials later (lag 5), or nine trials later (lag 9) and consisted of the studied scene along with a manipulated version of that scene in which one item was replaced with a different exemplar (item memory test) or was moved to a new location (relational memory test). Participants were to identify the exact match of the studied scene. Results As predicted, patients were disproportionately impaired on the test of relational memory. Item memory performance was marginally poorer among patients with extensive MTL damage, but both groups were impaired relative to matched comparison participants. Impaired performance was evident at all lags, including the shortest possible lag (lag 1). Conclusions The results are consistent with the proposed role of the hippocampus in relational memory binding and representation, even at short delays, and suggest that the hippocampus may also contribute to successful item memory when items are embedded in complex scenes. PMID:25068665

An eoq model for weibull deteriorating item with ramp type demand and salvage value under trade credit system

Directory of Open Access Journals (Sweden)

Lalit Mohan Pradhan

2014-03-01

Full Text Available Background: In the present competitive business scenario researchers have developed various inventory models for deteriorating items considering various practical situations for better inventory control. Permissible delay in payments with various demands and deteriorations is considerably a new concept introduced in developing various inventory models. These models are very useful for both the consumers and the manufacturer. Methods: In the present work an inventory model has been developed for a three parameter Weibull deteriorating item with ramp type demand and salvage value under trade credit system. Here we have considered a single item for developing the model. Results and conclusion: Optimal order quantity, optimal cycle time and total variable cost during a cycle have been derived for the proposed inventory model. The results obtained in this paper have been illustrated with the help of numerical examples and sensitivity analysis.   

41 CFR 101-27.404 - Review of items.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Review of items. 101-27.404 Section 101-27.404 Public Contracts and Property Management Federal Property Management...-Elimination of Items From Inventory § 101-27.404 Review of items. Except for standby or reserve stocks, items...

Towards an authoring system for item construction

NARCIS (Netherlands)

Rikers, Jos H.A.N.

1988-01-01

The process of writing test items is analyzed, and a blueprint is presented for an authoring system for test item writing to reduce invalidity and to structure the process of item writing. The developmental methodology is introduced, and the first steps in the process are reported. A historical

Modeling Local Item Dependence in Cloze and Reading Comprehension Test Items Using Testlet Response Theory

Science.gov (United States)

Baghaei, Purya; Ravand, Hamdollah

2016-01-01

In this study the magnitudes of local dependence generated by cloze test items and reading comprehension items were compared and their impact on parameter estimates and test precision was investigated. An advanced English as a foreign language reading comprehension test containing three reading passages and a cloze test was analyzed with a…

Effects of statistical models and items difficulties on making trait-level inferences: A simulation study

Directory of Open Access Journals (Sweden)

Nelson Hauck Filho

2014-12-01

Full Text Available Researchers dealing with the task of estimating locations of individuals on continuous latent variables may rely on several statistical models described in the literature. However, weighting costs and benefits of using one specific model over alternative models depends on empirical information that is not always clearly available. Therefore, the aim of this simulation study was to compare the performance of seven popular statistical models in providing adequate latent trait estimates in conditions of items difficulties targeted at the sample mean or at the tails of the latent trait distribution. Results suggested an overall tendency of models to provide more accurate estimates of true latent scores when using items targeted at the sample mean of the latent trait distribution. Rating Scale Model, Graded Response Model, and Weighted Least Squares Mean- and Variance-adjusted Confirmatory Factor Analysis yielded the most reliable latent trait estimates, even when applied to inadequate items for the sample distribution of the latent variable. These findings have important implications concerning some popular methodological practices in Psychology and related areas.

Heuristics for multi-item two-echelon spare parts inventory control problem with batch ordering in the central warehouse

NARCIS (Netherlands)

Topan, E.; Bayindir, Z.P.; Tan, T.

2010-01-01

We consider a multi-item two-echelon inventory system in which the central warehouse operates under a (Q;R) policy, and each local warehouse implements (S ¡ 1; S) policy. The objective is to find the policy parameters minimizing expected system-wide inventory holding and fixed ordering costs subject

Low-Cost High-Performance MRI

Science.gov (United States)

Sarracanie, Mathieu; Lapierre, Cristen D.; Salameh, Najat; Waddington, David E. J.; Witzel, Thomas; Rosen, Matthew S.

2015-10-01

Magnetic Resonance Imaging (MRI) is unparalleled in its ability to visualize anatomical structure and function non-invasively with high spatial and temporal resolution. Yet to overcome the low sensitivity inherent in inductive detection of weakly polarized nuclear spins, the vast majority of clinical MRI scanners employ superconducting magnets producing very high magnetic fields. Commonly found at 1.5-3 tesla (T), these powerful magnets are massive and have very strict infrastructure demands that preclude operation in many environments. MRI scanners are costly to purchase, site, and maintain, with the purchase price approaching $1 M per tesla (T) of magnetic field. We present here a remarkably simple, non-cryogenic approach to high-performance human MRI at ultra-low magnetic field, whereby modern under-sampling strategies are combined with fully-refocused dynamic spin control using steady-state free precession techniques. At 6.5 mT (more than 450 times lower than clinical MRI scanners) we demonstrate (2.5 × 3.5 × 8.5) mm3 imaging resolution in the living human brain using a simple, open-geometry electromagnet, with 3D image acquisition over the entire brain in 6 minutes. We contend that these practical ultra-low magnetic field implementations of MRI (standards for affordable (<$50,000) and robust portable devices.

10 CFR 835.605 - Labeling items and containers.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Labeling items and containers. 835.605 Section 835.605... items and containers. Except as provided at § 835.606, each item or container of radioactive material... information to permit individuals handling, using, or working in the vicinity of the items or containers to...

Introducing high-cost health care to patients: dentists' accounts of offering dental implant treatment.

Science.gov (United States)

Vernazza, Christopher R; Rousseau, Nikki; Steele, Jimmy G; Ellis, Janice S; Thomason, John Mark; Eastham, Jane; Exley, Catherine

2015-02-01

The decision-making process within health care has been widely researched, with shared decision-making, where both patients and clinicians share technical and personal information, often being cited as the ideal model. To date, much of this research has focused on systems where patients receive their care and treatment free at the point of contact (either in government-funded schemes or in insurance-based schemes). Oral health care often involves patients making direct payments for their care and treatment, and less is known about how this payment affects the decision-making process. It is clear that patient characteristics influence decision-making, but previous evidence suggests that clinicians may assume characteristics rather than eliciting them directly. The aim was to explore the influences on how dentists' engaged in the decision-making process surrounding a high-cost item of health care, dental implant treatments (DITs). A qualitative study using semi-structured interviews was undertaken using a purposive sample of primary care dentists (n = 25). Thematic analysis was undertaken to reveal emerging key themes. There were differences in how dentists discussed and offered implants. Dentists made decisions about whether to offer implants based on business factors, professional and legal obligations and whether they perceived the patient to be motivated to have treatment and their ability to pay. There was evidence that assessment of these characteristics was often based on assumptions derived from elements such as the appearance of the patient, the state of the patient's mouth and demographic details. The data suggest that there is a conflict between three elements of acting as a healthcare professional: minimizing provision of unneeded treatment, trying to fully involve patients in shared decisions and acting as a business person with the potential for financial gain. It might be expected that in the context of a high-cost healthcare intervention for which

Obtaining a Proportional Allocation by Deleting Items

NARCIS (Netherlands)

Dorn, B.; de Haan, R.; Schlotter, I.; Röthe, J.

2017-01-01

We consider the following control problem on fair allocation of indivisible goods. Given a set I of items and a set of agents, each having strict linear preference over the items, we ask for a minimum subset of the items whose deletion guarantees the existence of a proportional allocation in the

Highly integrated image sensors enable low-cost imaging systems

Science.gov (United States)

Gallagher, Paul K.; Lake, Don; Chalmers, David; Hurwitz, J. E. D.

1997-09-01

The highest barriers to wide scale implementation of vision systems have been cost. This is closely followed by the level of difficulty of putting a complete imaging system together. As anyone who has every been in the position of creating a vision system knows, the various bits and pieces supplied by the many vendors are not under any type of standardization control. In short, unless you are an expert in imaging, electrical interfacing, computers, digital signal processing, and high speed storage techniques, you will likely spend more money trying to do it yourself rather than to buy the exceedingly expensive systems available. Another alternative is making headway into the imaging market however. The growing investment in highly integrated CMOS based imagers is addressing both the cost and the system integration difficulties. This paper discusses the benefits gained from CMOS based imaging, and how these benefits are already being applied.

Item-Based Top-N Recommendation Algorithms

Science.gov (United States)

2003-01-20

basket of items, utilized by many e-commerce sites, cannot take advantage of pre-computed user-to-user similarities. Finally, even though the...not discriminate between items that are present in frequent itemsets and items that are not, while still maintaining the computational advantages of...453219 0.02% 7.74 ccard 42629 68793 398619 0.01% 9.35 ecommerce 6667 17491 91222 0.08% 13.68 em 8002 1648 769311 5.83% 96.14 ml 943 1682 100000 6.31

An Ownership/Lease Cost Comparison Analysis of Heavy Equipment Motor Vehicles in Air Force Materiel Command

Science.gov (United States)

1994-09-01

costs are the costs associated with a particular piece of equipment that do not change despite change in variable operating cost ( Horngren and Foster...The Operating and maintenance costs account for direct and indirect costs associated with their respective functions and vary with the utilization of...each vehicle. The operating direct cost includes all on-base and off- base fuel cost . Indirect operations costs account for bench 28 stock items

Comparison of high-speed transportation systems in special consideration of investment costs

Directory of Open Access Journals (Sweden)

R. Schach

2007-10-01

Full Text Available In this paper a substantial comparison of different high-speed transportation systems and an approach to stochastic cost estimations are provided. Starting from the developments in Europe, the high-speed traffic technical characteristics of high-speed railways and Maglev systems are compared. But for a comprehensive comparison more criterions must be included and led to a wider consideration and the development of a multi-criteria comparison of high-speed transportation systems. In the second part a stochastic approach to cost estimations of infrastructure projects is encouraged. Its advantages in comparison with the traditional proceeding are presented and exemplify the practical implementation.

A Review of Classical Methods of Item Analysis.

Science.gov (United States)

French, Christine L.

Item analysis is a very important consideration in the test development process. It is a statistical procedure to analyze test items that combines methods used to evaluate the important characteristics of test items, such as difficulty, discrimination, and distractibility of the items in a test. This paper reviews some of the classical methods for…

Driving Down HB-LED Costs. Implementation of Process Simulation Tools and Temperature Control Methods of High Yield MOCVD Growth

Energy Technology Data Exchange (ETDEWEB)

Quinn, William [Veeco Process Equipment, Inc., Plainview, NY (United States)