Research on Water Resources Design Carrying Capacity

Directory of Open Access Journals (Sweden)

Guanghua Qin

2016-04-01

Full Text Available Water resources carrying capacity (WRCC is a recently proposed management concept, which aims to support sustainable socio-economic development in a region or basin. However, the calculation of future WRCC is not well considered in most studies, because water resources and the socio-economic development mode for one area or city in the future are quite uncertain. This paper focused on the limits of traditional methods of WRCC and proposed a new concept, water resources design carrying capacity (WRDCC, which incorporated the concept of design. In WRDCC, the population size that the local water resources can support is calculated based on the balance of water supply and water consumption, under the design water supply and design socio-economic development mode. The WRDCC of Chengdu city in China is calculated. Results show that the WRDCC (population size of Chengdu city in development modeI (II, III will be 997 ×104 (770 × 104, 504 × 104 in 2020, and 934 × 104 (759 × 104, 462 × 104 in 2030. Comparing the actual population to the carrying population (WRDCC in 2020 and 2030, a bigger gap will appear, which means there will be more and more pressure on the society-economic sustainable development.

Concept and Connotation of Water Resources Carrying Capacity in Water Ecological Civilization Construction

Science.gov (United States)

Chao, Zhilong; Song, Xiaoyu; Feng, Xianghua

2018-01-01

Water ecological civilization construction is based on the water resources carrying capacity, guided by the sustainable development concept, adhered to the human-water harmony thoughts. This paper has comprehensive analyzed the concept and characteristics of the carrying capacity of water resources in the water ecological civilization construction, and discussed the research methods and evaluation index system of water carrying capacity in the water ecological civilization construction, finally pointed out that the problems and solutions of water carrying capacity in the water ecological civilization construction and put forward the future research prospect.

Direct FEM-computation of load carrying capacity of highly loaded passive components; Direkte FEM - Berechnung der Tragfaehigkeit hochbeanspruchter passiver Komponenten

Energy Technology Data Exchange (ETDEWEB)

Staat, M; Heitzer, M [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Sicherheitsforschung und Reaktortechnik

1998-11-01

Detailed, inelastic FEM analyses yield accurate information about the stresses and deformations in passive components. The local loading conditions, however, cannot be directly compared with a limit load in terms of structural mechanics. Concentration on the load carrying capacity is an approach simplifying the analysis. Based on the plasticity theory, limit and shakedown analyses calculate the load carrying capacities directly and exactly. The paper explains the implementation of the limit and shakedown data sets in a general FEM program and the direct calculation of the load carrying capacities of passive components. The concepts used are explained with respect to common structural analysis. Examples assuming high local stresses illustrate the application of FEM-based limit and shakedown analyses. The calculated interaction diagrams present a good insight into the applicable operational loads of individual passive components. The load carrying analysis also opens up a structure mechanics-based approach to assessing the load-to-collapse of cracked components made of highly ductile fracture-resistant material. (orig./CB) [Deutsch] Genaue Kenntnis der Spannungen und Verformungen in passiven Komponenten gewinnt man mit detailierten inelastischen FEM Analysen. Die lokale Beanspruchung laesst sich aber nicht direkt mit einer Beanspruchbarkeit im strukturmechanischen Sinne vergleichen. Konzentriert man sich auf die Frage nach der Tragfaehigkeit, dann vereinfacht sich die Analyse. Im Rahmen der Plastizitaetstheorie berechnen Traglast- und Einspielanalyse die tragbaren Lasten direkt und exakt. In diesem Beitrag wird eine Implementierung der Traglast- und Einspielsaetze in ein allgemeines FEM Programm vorgestellt, mit der die Tragfaehigkeit passiver Komponenten direkt berechnet wird. Die benutzten Konzepte werden in Bezug auf die uebliche Strukturanalyse erlaeutert. Beispiele mit lokal hoher Beanspruchung verdeutlichen die Anwendung der FEM basierten Traglast- und

Carrying capacity of a heterogeneous lake for migrating swans

NARCIS (Netherlands)

Gyimesi, A.

2010-01-01

One way to express the value of a natural habitat is its capacity to harbour a particular target species. In the case of migratory birds, the cumulative number of birds that can be accommodated at a site for a given period of time (‘bird-days’) became an accepted currency for this carrying capacity.

Carrying capacities for nature parks as engines for sustainable regional development

DEFF Research Database (Denmark)

Brandt, Jesper; Holmes, Esbern

as a departure for the comparison of the protectional conditions for the parks. Many other aspects of the nature and social carrying capacities however also constitute important conditions for the park management. Increasing emphasis on visitor experience is not only a challenge for the nature protection......Growth in the number of visitors is an upcoming problem in nature parks. Nature parks are at the same time facing increasing demand, falling public appropriations and receding focus on their conservation functions. To ensure a balancing of nature protection and economic utilization the concept...... of carrying capacity has received increasing attention among park-authorities all over the world. A comparative analysis of conditions and initiatives related to visitor/nature carrying capacities in 8 nature parks in the Baltic region has been carried out. All the parks are candidates for recognition...

Environmental sustainability control by water resources carrying capacity concept: application significance in Indonesia

Science.gov (United States)

Djuwansyah, M. R.

2018-02-01

This paper reviews the use of Water Resources carrying capacity concept to control environmental sustainability with the particular note for the case in Indonesia. Carrying capacity is a capability measure of an environment or an area to support human and the other lives as well as their activities in a sustainable manner. Recurrently water-related hazards and environmental problems indicate that the environments are exploited over its carrying capacity. Environmental carrying capacity (ECC) assessment includes Land and Water Carrying Capacity analysis of an area, suggested to always refer to the dimension of the related watershed as an incorporated hydrologic unit on the basis of resources availability estimation. Many countries use this measure to forecast the future sustainability of regional development based on water availability. Direct water Resource Carrying Capacity (WRCC) assessment involves population number determination together with their activities could be supported by available water, whereas indirect WRCC assessment comprises the analysis of supply-demand balance status of water. Water resource limits primarily environmental carrying capacity rather than the land resource since land capability constraints are easier. WRCC is a crucial factor known to control land and water resource utilization, particularly in a growing densely populated area. Even though capability of water resources is relatively perpetual, the utilization pattern of these resources may change by socio-economic and cultural technology level of the users, because of which WRCC should be evaluated periodically to maintain usage sustainability of water resource and environment.

Carrying Capacity Model Applied to Coastal Ecotourism of Baluran National Park, Indonesia

Science.gov (United States)

Armono, H. D.; Rosyid, D. M.; Nuzula, N. I.

2017-07-01

The resources of Baluran National Park have been used for marine and coastal ecotourism. The increasing number of visitors has led to the increasing of tourists and its related activities. This condition will cause the degradation of resources and the welfare of local communities. This research aims to determine the sustainability of coastal ecotourism management by calculating the effective number of tourists who can be accepted. The study uses the concept of tourism carrying capacity, consists the ecological environment, economic, social and physical carrying capacity. The results of the combined carrying capacity analysis in Baluran National Park ecotourism shows that the number of 3.288 people per day (151.248 tourists per year) is the maximum number of accepted tourists. The current number of tourist arrivals is only 241 people per day (87.990 tourists per year) which is far below the carrying capacity.

Review on the Evaluation System of Public Safety Carrying Capacity about Small Town Community

Institute of Scientific and Technical Information of China (English)

Ming; SUN; Tianyu; ZHU

2014-01-01

Recently,small town community public safety problem has been increasingly highlighted,but its research is short on public safety carrying capacity. Through the investigation and study of community public safety carrying capacity,this paper analyzes the problem of community public safety in our country,to construct index evaluation system of public safety carrying capacity in small town community. DEA method is used to evaluate public safety carrying capacity in small town community,to provide scientific basis for the design of support and standardization theory about small town community in public safety planning.

Impact of the thermal effect on the load-carrying capacity of a slipper pair for an aviation axial-piston pump

Directory of Open Access Journals (Sweden)

Hesheng TANG

2018-02-01

Full Text Available A thermal hydraulic model based on the lumped parameter method is presented to analyze the load-carrying capacity of a slipper pair in an aviation axial-piston pump under specified operating conditions. Both theoretical and experimental results are presented to demonstrate the validity of the thermal hydraulic model. The results illustrate that the squeezing force and thermal wedge bearing force are the main factors that affect the film thickness and load-carrying capacity. At high oil temperature and high load pressure, the film thickness decreases with increasing clamping force due to a combined action of the squeezing bearing force and the thermal wedge bearing force, but the load-carrying capacity will increase. An increase of the film thickness is proven to be beneficial under high shaft rotational speed but especially dangerous as it strongly increases the ripple amplitude of the film thickness, which leads to decreasing the load-carrying capacity. The structural parameters of the slipper can be optimized to achieve desired performance, such as the slipper radius ratio and orifice length diameter ratio. To satisfy the requirement of the load-carrying capacity, the slipper radius ratio should be selected from 1.4 to 1.8, and the orifice length diameter ratio should be selected from 4 to 5. Keywords: Aviation axial piston pump, Fluid lubrication, Load-carrying capacity, Slipper pair, Thermal effect

Measurement and assessment of carrying capacity of the environment in Ningbo, China.

Science.gov (United States)

Liu, R Z; Borthwick, Alistair G L

2011-08-01

Carrying Capacity of the Environment (CCE) provides a useful measure of the sustainable development of a region. Approaches that use integrated assessment instead of measurement can lead to misinterpretation of sustainable development because of confusion between Environmental Stress (ES) indexes and CCE indexes, and the selection of over-simple linear plus models. The present paper proposes a comprehensive measurement system for CCE which comprises models of natural resources capacity, environmental assimilative capacity, ecosystem services capacity, and society supporting capacity. The corresponding measurable indexes are designed to assess CCE using a carrying capacity surplus ratio model and a vector of surplus ratio of carrying capacity model. The former aims at direct comparison of ES and CCE based on the values of basic indexes, and the latter uses a Euclidean vector to assess CCE states. The measurement and assessment approaches are applicable to Strategic Environmental Assessment (SEA) and environmental planning and management. A case study is presented for Ningbo, China, whereby all the basic indexes of ECC are measured and the CCE states assessed for 2005 and 2010. Copyright © 2011 Elsevier Ltd. All rights reserved.

Introducing carrying capacity-based normalisation in LCA: framework and development of references at midpoint level

DEFF Research Database (Denmark)

Bjørn, Anders; Hauschild, Michael Zwicky

2015-01-01

carrying capacity-based normalisation references. The purpose of this article is to present a framework for normalisation against carrying capacity-based references and to develop average normalisation references (NR) for Europe and the world for all those midpoint impact categories commonly included....... A literature review was carried out to identify scientifically sound thresholds for each impact category. Carrying capacities were then calculated from these thresholds and expressed in metrics identical to midpoint indicators giving priority to those recommended by ILCD. NR was expressed as the carrying...... ozone formation and soil quality were found to exceed carrying capacities several times.The developed carrying capacity-based normalisation references offer relevant supplementary reference information to the currently applied references based on society’s background interventions by supporting...

Rural Settlement Development and Environment Carrying Capacity Changes in Progo River Basin

OpenAIRE

Su Ritohardoyo; P Priyono

2016-01-01

Generally the broader rural settlement the heavier population pressure on agricultural land. It indicates that carrying capacity of the rural environment threatened lower. The spatial distribution of the threat in a river basin is quite important as one of the river basin management inputs. Therefore, this article aims at exposing result of research about influence rural population growth and rural settlement land changes to environment carrying capacity. This research was carried out in the ...

Preliminary research on quantitative methods of water resources carrying capacity based on water resources balance sheet

Science.gov (United States)

Wang, Yanqiu; Huang, Xiaorong; Gao, Linyun; Guo, Biying; Ma, Kai

2018-06-01

Water resources are not only basic natural resources, but also strategic economic resources and ecological control factors. Water resources carrying capacity constrains the sustainable development of regional economy and society. Studies of water resources carrying capacity can provide helpful information about how the socioeconomic system is both supported and restrained by the water resources system. Based on the research of different scholars, major problems in the study of water resources carrying capacity were summarized as follows: the definition of water resources carrying capacity is not yet unified; the methods of carrying capacity quantification based on the definition of inconsistency are poor in operability; the current quantitative research methods of water resources carrying capacity did not fully reflect the principles of sustainable development; it is difficult to quantify the relationship among the water resources, economic society and ecological environment. Therefore, it is necessary to develop a better quantitative evaluation method to determine the regional water resources carrying capacity. This paper proposes a new approach to quantifying water resources carrying capacity (that is, through the compilation of the water resources balance sheet) to get a grasp of the regional water resources depletion and water environmental degradation (as well as regional water resources stock assets and liabilities), figure out the squeeze of socioeconomic activities on the environment, and discuss the quantitative calculation methods and technical route of water resources carrying capacity which are able to embody the substance of sustainable development.

The Analysis and Calculation Method of Urban Rail Transit Carrying Capacity Based on Express-Slow Mode

Directory of Open Access Journals (Sweden)

Xiaobing Ding

2016-01-01

Full Text Available Urban railway transport that connects suburbs and city areas is characterized by uneven temporal and spatial distribution in terms of passenger flow and underutilized carrying capacity. This paper aims to develop methodologies to measure the carrying capacity of the urban railway by introducing a concept of the express-slow mode. We first explore factors influencing the carrying capacity under the express-slow mode and the interactive relationships among these factors. Then we establish seven different scenarios to measure the carrying capacity by considering the ratio of the number of the express trains and the slow trains, the station where overtaking takes place, and the number of overtaking maneuvers. Taking Shanghai Metro Line 16 as an empirical study, the proposed methods to measure the carrying capacity under different express-slow mode are proved to be valid. This paper contributes to the literature by remodifying the traditional methods to measure the carrying capacity when different express-slow modes are applied to improve the carrying capacity of the suburban railway.

Land Potential Productivity and Population Carrying Capacity of Yan’an City

OpenAIRE

Liu, Xiaoling; Zhang, Wei

2013-01-01

The productivity attenuation method is adopted to calculate land potential productivity of counties of Yan’an City and calculate population carrying capacity at current productivity level. Rsults shows that high photosynthetic potential productivity area and high light and temperature potential productivity area are mainly situated in the north, while high climatic potential area and high land potential productivity area are mainly concentrated in the south. From solar radiation, moisture a...

Carrying capacity in a heterogeneous environment with habitat connectivity.

Science.gov (United States)

Zhang, Bo; Kula, Alex; Mack, Keenan M L; Zhai, Lu; Ryce, Arrix L; Ni, Wei-Ming; DeAngelis, Donald L; Van Dyken, J David

2017-09-01

A large body of theory predicts that populations diffusing in heterogeneous environments reach higher total size than if non-diffusing, and, paradoxically, higher size than in a corresponding homogeneous environment. However, this theory and its assumptions have not been rigorously tested. Here, we extended previous theory to include exploitable resources, proving qualitatively novel results, which we tested experimentally using spatially diffusing laboratory populations of yeast. Consistent with previous theory, we predicted and experimentally observed that spatial diffusion increased total equilibrium population abundance in heterogeneous environments, with the effect size depending on the relationship between r and K. Refuting previous theory, however, we discovered that homogeneously distributed resources support higher total carrying capacity than heterogeneously distributed resources, even with species diffusion. Our results provide rigorous experimental tests of new and old theory, demonstrating how the traditional notion of carrying capacity is ambiguous for populations diffusing in spatially heterogeneous environments. © 2017 John Wiley & Sons Ltd/CNRS.

Langkawi Island, Social Aspect and the Carrying Capacity

Directory of Open Access Journals (Sweden)

Mohamad Diana

2014-01-01

Full Text Available The aptitude to convince a range of preferences has facilitated the island tourism attractions to achieve international recognition and at present KILIM Geopark is enjoyed by a prominent percentage of individuals wide-reaching. Conventional knowledge has that the island attractions are operating on the limited immobile resources, of which, have raised the scholars’ concerns over the carrying capacity issue. When analyzing carrying capacity, scholars have traditionally focused on the environmental part, hence, this working paper is motivated to convey onto the table issues relating to the social characteristics. This particular paper employed the self-administered questionnaire survey instrument which was structured to answer the two-fold objective specifically the tourists’ satisfaction level with their tourism experience and knowledge gap in relation to improving the island tourism. Targeting the tourists with minimum age of 18, this working paper collects information on the tourists’ perception towards hospitality, facilities and safety issues. In addition, this working paper comes to scrutinize different results of demographic factors as compared to what have been documented by earlier studies. Besides, it is learned that ‘safety issue’ variable plays an important role when it comes to the following factors: tourist arrival, access to facilities and tourism experience.

Random noise characterization on the carrying capacities of a ...

African Journals Online (AJOL)

The process of the survival of species dependent on a limited resource in a polluted environment which isnot a new idea can be described by the technique of a mathematical modelling. We have utilised the technique of a numerical simulation to study the impact of environmental random noise on the carrying capacities of ...

One hundred fold increase in current carrying capacity in a carbon nanotube-copper composite

Science.gov (United States)

Subramaniam, Chandramouli; Yamada, Takeo; Kobashi, Kazufumi; Sekiguchi, Atsuko; Futaba, Don N.; Yumura, Motoo; Hata, Kenji

2013-07-01

Increased portability, versatility and ubiquity of electronics devices are a result of their progressive miniaturization, requiring current flow through narrow channels. Present-day devices operate close to the maximum current-carrying-capacity (that is, ampacity) of conductors (such as copper and gold), leading to decreased lifetime and performance, creating demand for new conductors with higher ampacity. Ampacity represents the maximum current-carrying capacity of the object that depends both on the structure and material. Here we report a carbon nanotube-copper composite exhibiting similar conductivity (2.3-4.7 × 105Scm-1) as copper (5.8 × 105Scm-1), but with a 100-times higher ampacity (6 × 108Acm-2). Vacuum experiments demonstrate that carbon nanotubes suppress the primary failure pathways in copper as observed by the increased copper diffusion activation energy (~2.0eV) in carbon nanotube-copper composite, explaining its higher ampacity. This is the only material with both high conductivity and high ampacity, making it uniquely suited for applications in microscale electronics and inverters.

The logistic model-generated carrying capacities for wild herbivores ...

African Journals Online (AJOL)

Jesse

Under this formulation, both carrying capacity and exchange ratios are endogenously determined (Kinyua and Njoka, 2001), making it possible to empirically estimate the population growth models for Grant's gazelle, Thompson's gazelle and Zebra. (1) for i = 1,…,n-1 j = 1,…,2 and i ≠ j. Here Hit+1, measured in animal units, ...

Quantifying spatially derived carrying capacity occupation: Framework for characterisation modelling and application to terrestrial acidification

DEFF Research Database (Denmark)

Bjørn, Anders; Margni, M.; Bulle, C.

*year. This metric resembles that of the ecological footprint method and may be compared to the availability of land or water. The framework was applied to the terrestrial acidification impact category. The geochemical steady-state model PROFILE was used to quantify carrying capacities as deposition levels......The popularity of the ecological footprint method and the planetary boundaries concept shows an increasing interest among decision makers in comparing environmental impacts to carrying capacities of natural systems. Recently carrying capacity-based normalisation references were developed for impact...

Load carrying capacity of keyed joints reinforced with high strength wire rope loops

DEFF Research Database (Denmark)

Jørgensen, Henrik B.; Hoang, Linh Cao

2015-01-01

friendly shear connection can be obtained by replacing the U-bars with high strength looped wire ropes. The wire ropes have the advantage of being flexible (they have virtually no bending stiffness) which makes installation of wall elements much easier. The looped wire ropes are usually pre-installed in so......-called wire boxes which are embedded in the precast wall elements. Once the joint is grouted with mortar, the boxes will function as shear keys and the overlapping wire loops will function as transverse reinforcement that replaces the U-bars. This paper presents a rigid-plastic upper bound model to determine...... the shear capacity of wire loop connections. Tests have shown that the shear capacity of such joints – due to the relatively high tensile strength of the wire ropes - is more prone to be governed by fracture of the joint mortar in combination with yielding of the locking bar. To model this type of failure...

Evaluation of Resources Carrying Capacity in China Based on Remote Sensing and GIS

Science.gov (United States)

Liu, K.; Gan, Y. H.; Zhang, T.; Luo, Z. Y.; Wang, J. J.; Lin, F. N.

2018-04-01

This paper accurately extracted the information of arable land, grassland (wetland), forest land, water area and construction land, based on 1 : 250000 basic geographic information data. It made model modification of comprehensive CCRR to achieve carrying capacity calculation taking resource quality into consideration. Ultimately it achieved a comprehensive assessment of CCRR status in China. The top ten cities where the status of carrying capacity of resources was overloaded were Wenzhou, Shanghai, Chengdu, Baoding, Shantou, Jieyang, Dongguan, Fuyang, Zhoukou and Handan. The cities were basically distributed in the central and southern areas with convenient transportation and more economically developed areas. Among the cities in surplus status, resources carrying capacity in Hulun Buir was the most abundant, followed by Heihe, Bayingolin Mongol Autonomous Prefecture, Qiqihar, Chifeng and Jiamusi, all of which were located in northeastern China with a small population and plentiful cultivated land.

Botanical Composition, Grass Production, and Carrying Capacity of Pasture in Timor Tengah Selatan District

Directory of Open Access Journals (Sweden)

V. E. Se’u

2015-12-01

Full Text Available This study was conducted to analyze the botanical composition, grass production, carrying capacity, and potential production of nutrients in pasture located in Timor Tengah Selatan Regency. The experiment was conducted from February to July 2013, using field survey method. The botanical composition, grass production and carrying capacity on real condition were analyzed descriptively, while the grass production and carrying capacity based of cutting arrangement were analyzed by using randomized block factorial design with 3 altitude locations (Sub District of Mollo Utara with altitude of 1007 m above sea level; Sub District of Noebeba, 500 m ASL, and Sub District of Amanuban Selatan, 65 m ASL x 2 cutting intervals (1 and 2 month and 5 replications. The results showed that the grass type dominated the pasture in the Sub District of Mollo Utara, while legum type was more dominant in the pasture in the Sub Districts of Noebeba and Amanuban Selatan. The potential production of dry matter grass in Timor Tengah Selatan Regency based on real condition was 150 to 390 kg/ha/yr, this could accommodate 0.24 to 0.63 AU/ha/yr. The arrangement of cutting interval by 1 month in Mollo Utara and 2 months in Noebeba and Amanuban Selatan could increase (P<0.05 grass production and carrying capacity. The potential productions of grass nutrients were higher in Sub District of Mollo Utara, while potential production of grass dry matter was higher in Sub Districts of Noebeba and Amanuban Selatan. It was concluded that grass dry matter potential production and carrying capacity in Timor Tengah Selatan Regency were low. The arrangement of cutting interval could increase grass dry matter potential production, carrying capacity, nutrition production, and quality of nutrition.

Load Carrying Capacity of Metal Dowel Type Connections of Timber Structures

Science.gov (United States)

Gocál, Jozef

2014-12-01

This paper deals with the load-carrying capacity calculation of laterally loaded metal dowel type connections according to Eurocode 5. It is based on analytically derived, relatively complicated mathematical relationships, and thus it can be quite laborious for practical use. The aim is to propose a possible simplification of the calculation. Due to quite a great variability of fasteners' types and the connection arrangements, the attention is paid to the most commonly used nailed connections. There was performed quite an extensive parametric study focused on the calculation of load-carrying capacity of the simple shear and double shear plane nail connections, joining two or three timber parts of softwood or hardwood. Based on the study results, in conclusion there are presented simplifying recommendations for practical design.

Water Quality Assessment and Determining the Carrying Capacity of Pollution Load Batang Kuranji River

Science.gov (United States)

Dewata, I.; Adri, Z.

2018-04-01

This study aims to determine the water quality and carrying capacity of pollution load Batang Kuranji River in the headwaters, middle, and downstream. This research is descriptive quantitative parameters of pH, BOD, COD, TSS, and DOES Depictions of river water quality refer to RegulationNo.82/2001, while determination of carrying capacity of pollution load river refers to the Kep Men LHNo.10/2003.The result is Kuranji Batang River water quality upstream region included in either category who meet the quality standard first class ofPP82/2001. TSS concentrations at head waters of 21 mg/L, BOD1,6 mg/L, COD7,99mg/L and DO 7,845 mg/L. While the carrying capacity of pollution load river in upstream region included in both categories namely BOD of 4,4 kg/sec, COD 273,60 kg/sec, TSS906,00kg/sec, and DO parameters of 49.20 kg/sec. Middle region (point 2, 3, and 4) water quality Batang Kuranji River has exceeded the quality standard of 82/2001 for class II and class III. Meanwhile, carrying capacity of pollution load river in area included in ugly category. The calculation is done with application Qual2Kw show that carrying capacity of pollution load river of BOD -857.3 kg/sec, COD -777.40 kg/sec, TSS +9511.5 kg/sec, and DO +69.30 kg/sec.

Prediction of bird-day carrying capacity on a staging site: a test of depletion models

NARCIS (Netherlands)

Nolet, B.A.; Gyimesi, A.; Klaassen, R.H.G.

2006-01-01

1. The carrying capacity of a site for migratory water birds, expressed in bird-days, can be of particular conservation value. Several attempts have been made to model this carrying capacity using ideal free distribution models such as, for instance, depletion models, in which the distribution is

Analysis on economic carrying capacity index of pig breeding in China

Science.gov (United States)

Leng, Bi-Bin; Liu, Jia-Ling; Xu, Yue-Feng

2017-08-01

In this paper, factor analysis method was employed to analyze and calculate the Gross Domestic Product (GDP) per capita in the last decade, the proportion of research and experiment development (R&D) expenditure equivalent to GDP, urban and rural residents’ pork consumption and explored the scale of Chinese pig breeding on economic carrying capacity index. The result showed that the growth of GDP had led to better techniques and higher field investment, and stronger support like science and technology from the government provided good conditions for large scale of pig breeding. Besides, the substantial increase of pork consumption between rural and urban residents has contributed to the pig breeding in large scale. As a result, the economic carrying capacity index in Chinese pig farming is on the rise.

Approximate solution of oil film load-carrying capacity of turbulent journal bearing with couple stress flow

Science.gov (United States)

Zhang, Yongfang; Wu, Peng; Guo, Bo; Lü, Yanjun; Liu, Fuxi; Yu, Yingtian

2015-01-01

The instability of the rotor dynamic system supported by oil journal bearing is encountered frequently, such as the half-speed whirl of the rotor, which is caused by oil film lubricant with nonlinearity. Currently, more attention is paid to the physical characteristics of oil film due to an oil-lubricated journal bearing being the important supporting component of the bearing-rotor systems and its nonlinear nature. In order to analyze the lubrication characteristics of journal bearings efficiently and save computational efforts, an approximate solution of nonlinear oil film forces of a finite length turbulent journal bearing with couple stress flow is proposed based on Sommerfeld and Ocvirk numbers. Reynolds equation in lubrication of a finite length turbulent journal bearing is solved based on multi-parametric principle. Load-carrying capacity of nonlinear oil film is obtained, and the results obtained by different methods are compared. The validation of the proposed method is verified, meanwhile, the relationships of load-carrying capacity versus eccentricity ratio and width-to-diameter ratio under turbulent and couple stress working conditions are analyzed. The numerical results show that both couple stress flow and eccentricity ratio have obvious influence on oil film pressure distribution, and the proposed method approximates the load-carrying capacity of turbulent journal bearings efficiently with various width-to-diameter ratios. This research proposes an approximate solution of oil film load-carrying capacity of turbulent journal bearings with different width-to-diameter ratios, which are suitable for high eccentricity ratios and heavy loads.

Alveolar gas exchange and tissue oxygenation during incremental treadmill exercise, and their associations with blood O2 carrying capacity

Directory of Open Access Journals (Sweden)

Antti-Pekka E. Rissanen

2012-07-01

Full Text Available The magnitude and timing of oxygenation responses in highly active leg muscle, less active arm muscle, and cerebral tissue, have not been studied with simultaneous alveolar gas exchange measurement during incremental treadmill exercise. Nor is it known, if blood O2 carrying capacity affects the tissue-specific oxygenation responses. Thus, we investigated alveolar gas exchange and tissue (m. vastus lateralis, m. biceps brachii, cerebral cortex oxygenation during incremental treadmill exercise until volitional fatigue, and their associations with blood O2 carrying capacity in 22 healthy men. Alveolar gas exchange was measured, and near-infrared spectroscopy (NIRS was used to monitor relative concentration changes in oxy- (Δ[O2Hb], deoxy- (Δ[HHb] and total hemoglobin (Δ[tHb], and tissue saturation index (TSI. NIRS inflection points (NIP, reflecting changes in tissue-specific oxygenation, were determined and their coincidence with ventilatory thresholds (anaerobic threshold (AT, respiratory compensation point (RC; V-slope method was examined. Blood O2 carrying capacity (total hemoglobin mass (tHb-mass was determined with the CO-rebreathing method. In all tissues, NIPs coincided with AT, whereas RC was followed by NIPs. High tHb-mass associated with leg muscle deoxygenation at peak exercise (e.g., Δ[HHb] from baseline walking to peak exercise vs. tHb-mass: r = 0.64, p < 0.01, but not with arm muscle- or cerebral deoxygenation. In conclusion, regional tissue oxygenation was characterized by inflection points, and tissue oxygenation in relation to alveolar gas exchange during incremental treadmill exercise resembled previous findings made during incremental cycling. It was also found out, that O2 delivery to less active m. biceps brachii may be limited by an accelerated increase in ventilation at high running intensities. In addition, high capacity for blood O2 carrying was associated with a high level of m. vastus lateralis deoxygenation at peak

Thermal carrying capacity for a thermally-sensitive species at the warmest edge of its range.

Directory of Open Access Journals (Sweden)

Daniel Ayllón

Full Text Available Anthropogenic environmental change is causing unprecedented rates of population extirpation and altering the setting of range limits for many species. Significant population declines may occur however before any reduction in range is observed. Determining and modelling the factors driving population size and trends is consequently critical to predict trajectories of change and future extinction risk. We tracked during 12 years 51 populations of a cold-water fish species (brown trout Salmo trutta living along a temperature gradient at the warmest thermal edge of its range. We developed a carrying capacity model in which maximum population size is limited by physical habitat conditions and regulated through territoriality. We first tested whether population numbers were driven by carrying capacity dynamics and then targeted on establishing (1 the temperature thresholds beyond which population numbers switch from being physical habitat- to temperature-limited; and (2 the rate at which carrying capacity declines with temperature within limiting thermal ranges. Carrying capacity along with emergent density-dependent responses explained up to 76% of spatio-temporal density variability of juveniles and adults but only 50% of young-of-the-year's. By contrast, young-of-the-year trout were highly sensitive to thermal conditions, their performance declining with temperature at a higher rate than older life stages, and disruptions being triggered at lower temperature thresholds. Results suggest that limiting temperature effects were progressively stronger with increasing anthropogenic disturbance. There was however a critical threshold, matching the incipient thermal limit for survival, beyond which realized density was always below potential numbers irrespective of disturbance intensity. We additionally found a lower threshold, matching the thermal limit for feeding, beyond which even unaltered populations declined. We predict that most of our study

The study of environmental carrying capacity for sustainable tourism in Telaga Warna Telaga Pengilon Nature Park, Dieng Plateu, Central Java

Science.gov (United States)

Melat Aryasa, Alexander; Nur Bambang, Azis; Muhammad, Fuad

2017-06-01

The increasing in quantity of the tourists visiting Telaga Warna Telaga Pengilon Nature Park, Dieng Plateau, Central Java, can cause a potential threat toward the conservation sustainability of the tourist attraction and the surrounding area. The utilization of conservation area for tourist attraction has to be carried out based on the principal of Environmental Carrying Capacity so that it will not affect the ecosystem. This study aims to determine the value of Telaga Warna Telaga Pengilon Nature Park environmental carrying capacity as a conservation area used for tourism activities. The environmental carrying capacities calculated in this study were physical carrying capacity, real carrying capacity, and effective carrying capacity. Results of this research show that the physical carrying capacity of The Telaga Warna Telaga Pengilon Nature Park was 31,302 visitors, the real capacity was 869 visitors/day and the effective carrying capacity was 579 visitors/day. Thus, the sustainable tourism development strategy is needed to manage the everlasting natural resources.

Carrying capacity of Chaetoceros gracilis in Homa Lagoon and the ...

African Journals Online (AJOL)

The possibility for nutrient limitation to affect C. gracilis was assessed from two different ecosystems (Izmir Bay and Homa Lagoon). Our goal was to determine the growth rate of all nutrients and the maximum levels of the C. gracilis phytoplankton biomass (the maximum biomass carrying capacity) on the extent of its full ...

Meta-analysis of carrying capacity and abundance-area relationships in marine fish species

DEFF Research Database (Denmark)

Mantzouni, Irene

Knowledge on the carrying capacity and the abundance-area relationships of fish is critical to evaluate the impacts of exploitation and climate on the sustainability and also the recovery potential of the populations. Of particular interest is climate change, inducing major consequences for popul......Knowledge on the carrying capacity and the abundance-area relationships of fish is critical to evaluate the impacts of exploitation and climate on the sustainability and also the recovery potential of the populations. Of particular interest is climate change, inducing major consequences...... differences in the patterns were identified between stocks located in the upper and lower thermal range. In the latter, strong year-classes occurred mainly during warmer seasons and vice versa. For stocks located in the warmer waters, however, no significant patterns were obtained, suggesting that increased......, to incorporate the influence of ecosystem factors, mainly temperature and habitat size, on model parameters representing cod maximum reproductive rate and carrying capacity. The pattern of temperature effects on cod productivity at the species level were identified and SR model parameters were estimated...

Water Environmental Carrying Capacity for Activities of Intensive Shrimp Farm in Banyuputih Sub-District, Situbondo Regency

Directory of Open Access Journals (Sweden)

Abdul Muqsith

2014-09-01

Full Text Available This research was aimed to determine the width area of an intensive shrimp farm which can be supported by water environment of Banyuputih Sub-District, Situbondo Regency according to the water assimilation capacity towards the farm’s organic waste. We used survey method and secondary data collection from other researches or result report of relevant institution. This study was using two approaches of environmental carrying capacities, i.e. (1 quantitative method on available water volume in coast (coastal water and (2 quantitative method on available Dissolved Oxygen (DO in waste receiving water body of coastal water. The result showed that the utilization of coastal area for intensive shrimp farm activities in this study area is not exceeding its carrying capacity of water yet. Based on the analysis, the water environmental carrying capacity for the farm’s organic waste is 375.637 kg TSS. Organic waste (TSS disposed from an intensive shrimp cultivation at the study area is 6.506 kg TSS.ha-1.MT-1. The width of intensive area which can be supported by Banyuputih Situbondo water environment is 58 ha. The width of available intensive pond area at study site is 113 ha, but only 39 ha is active/productive, the remaining 74 ha is inactive/unproductive area. If unproductive area will be re-operated/reactivated again, then we would recommend only 19 ha according to the water environment carrying capacity for the farm’s organic waste (58 ha. Estimation result of water environment carrying capacity for this organic waste of shrimp farm can be used as reference to determine the development or management threshold of sustainable pond area at this study site.   Keywords: environment carrying capacity, organic waste, shrimp farm

Rural Settlement Development and Environment Carrying Capacity Changes in Progo River Basin

Directory of Open Access Journals (Sweden)

Su Ritohardoyo

2016-12-01

Full Text Available Generally the broader rural settlement the heavier population pressure on agricultural land. It indicates that carrying capacity of the rural environment threatened lower. The spatial distribution of the threat in a river basin is quite important as one of the river basin management inputs. Therefore, this article aims at exposing result of research about influence rural population growth and rural settlement land changes to environment carrying capacity. This research was carried out in the rural area in Progo river basin consists 56 sub districts (34 sub districts part of Jawa Tengah Province, and 22 sub districts part of Yogyakarta Special Region. The whole sub districts are such as unit analysis, and research method is based on secondary data analysis. Several data consist Districts Region in Figure 1997 and 2003 (Temanggung, Magelang, Kulon Progo, Sleman and Bantul such as secondary data analysis. Data analysis employs of frequency and cross tabulation, statistics of regression and test. Result of the research shows that population growth of the rural areas in Progo river basin are about 0.72% annum; or the household growth about 3.15% annum as long as five years (1996-2003. Spatial distribution of the population growth in the upper part of the Progo river basin is higher than in the middle and lower part of the basin. The number proportion of farmer in every sub district area in this river basin have increased from 69.95% in 1997 to 70.81% in the year of 2003. It means that work opportunities broadening are still sluggish. However, the number proportion of farmers in the upper part of the Progo river basin is lower than in the middle and lower part of the basin. The rates of settlement land areas changes (0.32 ha/annum as long as five years (1997-2003 is not as fast as the rates of agricultural land areas changes (0.47 ha/annum. Spatial land settlement areas changes in the lower (6.1 ha/annum and middle parts (2.4 ha/annum faster than

Management of marine cage aquaculture. Environmental carrying capacity method based on dry feed conversion rate.

Science.gov (United States)

Cai, Huiwen; Sun, Yinglan

2007-11-01

Marine cage aquaculture produces a large amount of waste that is released directly into the environment. To effectively manage the mariculture environment, it is important to determine the carrying capacity of an aquaculture area. In many Asian countries trash fish is dominantly used in marine cage aquaculture, which contains more water than pellet feed. The traditional nutrient loading analysis is for pellet feed not for trash fish feed. So, a more critical analysis is necessary in trash fish feed culturing areas. Corresponding to FCR (feed conversion rate), dry feed conversion rate (DFCR) was used to analyze the nutrient loadings from marine cage aquaculture where trash fish is used. Based on the hydrodynamic model and the mass transport model in Xiangshan Harbor, the relationship between the water quality and the waste discharged from cage aquaculture has been determined. The environmental carrying capacity of the aquaculture sea area was calculated by applying the models noted above. Nitrogen and phosphorus are the water quality parameters considered in this study. The simulated results show that the maximum nitrogen and phosphorus concentrations were 0.216 mg/L and 0.039 mg/L, respectively. In most of the sea area, the nutrient concentrations were higher than the water quality standard. The calculated environmental carrying capacity of nitrogen and phosphorus in Xiangshan Harbor were 1,107.37 t/yr and 134.35 t/yr, respectively. The waste generated from cage culturing in 2000 has already exceeded the environmental carrying capacity. Unconsumed feed has been identified as the most important origin of all pollutants in cage culturing systems. It suggests the importance of increasing the feed utilization and improving the feed composition on the basis of nutrient requirement. For the sustainable development of the aquaculture industry, it is an effective management measure to keep the stocking density and pollution loadings below the environmental carrying

Impact of Flexibility Options on Grid Economic Carrying Capacity of Solar and Wind: Three Case Studies

Energy Technology Data Exchange (ETDEWEB)

Denholm, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States); Novacheck, Joshua [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jorgenson, Jennie [National Renewable Energy Lab. (NREL), Golden, CO (United States); O' Connell, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-12-01

In this study, we attempt to quantify the benefits of various options of grid flexibility by measuring their impact on two measures: economic carrying capacity and system costs. Flexibility can increase economic carrying capacity and reduce overall system costs. In some cases, options that provide a limited increase in economic carrying capacity can provide significant operational savings, thus demonstrating the need to evaluate flexibility options using multiple metrics. The value of flexibility options varies regionally due to different generation mixes and types of renewables. The more rapid decline in PV value compared to wind makes PV more dependent on adding flexibility options, including transmission and energy storage.

Simple Evaluation of Load-Carrying Capacity of Multi-Span Folding Bridges based on Floating Supports

Directory of Open Access Journals (Sweden)

Jan Marszałek

2014-12-01

Full Text Available [b]Abstract[/b]. The papers covers simple evaluation of load-carrying capacity of multi-span folding bridges based on floating supports. Combined bridges built in this approach, could be used as a temporary crossing. The methodology of this evaluation is shown graphically on the basis of designed nomograms for two existing bridge structures i.e. MS-54 and DMS-65, mounted on rigid and floating supports. These nomograms facilitate the simple and fast determination of the impact of changing fixed support into floating support with different bridge length spans on the carrying capacity of the bridge. The paper also presents the influence of long-term use (enlarging the mounting backlash in the joints of these structures on the carrying capacity of the bridge.[b]Keywords[/b]: building, folding bridges, nomograms, assembly clearances

High-burnup/low-cooling-time fuel carrying capacity of the GA-4 and GA-9 spent fuel shipping casks

International Nuclear Information System (INIS)

Boshoven, J.K.; Hopf, J.E.

1994-01-01

In response to utilities' projected needs to ship higher burnup spent fuel, General Atomics (GA) has performed shielding and thermal analysis for the GA-4 and GA-9 legal weight shipping casks to determine the minimum cooling times for various burnup levels for fully loaded GA-4 and GA-9 casks and reduced payloads for the casks. Tables are provided in the paper which show the minimum cooling time for a given burnup and payload for each of the casks. The analyses show that the GA-4 and GA-9 casks can carry at least as many high-burnup and/or short-cooling-time spent fuel assemblies as present day shipping casks. In addition, the GA casks are able to carry at least twice as many assemblies as the present day shipping casks if the spent fuel burnup levels and/or cooling times are open-quotes coolerclose quotes or open-quotes as coolclose quotes as their design basis fuels. The increased shipping capacity for these more common open-quotes coolerclose quotes assemblies allows fewer shipments and therefore increases the efficiency and lowers predicted risks of the transport system

Time dependent variation of carrying capacity of prestressed precast beam

Science.gov (United States)

Le, Tuan D.; Konečný, Petr; Matečková, Pavlína

2018-04-01

The article deals with the evaluation of the precast concrete element time dependent carrying capacity. The variation of the resistance is inherited property of laboratory as well as in-situ members. Thus the specification of highest, yet possible, laboratory sample resistance is important with respect to evaluation of laboratory experiments based on the test machine loading capabilities. The ultimate capacity is evaluated through the bending moment resistance of a simply supported prestressed concrete beam. The probabilistic assessment is applied. Scatter of random variables of compressive strength of concrete and effective height of the cross section is considered. Monte Carlo simulation technique is used to investigate the performance of the cross section of the beam with changes of tendons’ positions and compressive strength of concrete.

Study on tourist carrying capacity of sustainable tourism---by taking Qingliang Mountain in the south-eastern china as an example

Science.gov (United States)

Jin, Shenglang; Liu, Ting

2017-05-01

This paper analyzed measurable problems of tourist carrying capacity and then studied the corresponding measures by adopting theories and methods of environment sciences. Tourist carrying capacity of Qingliang Mountain was studied by analyzing the system of tourism environment capacity. The results showed that the level of service was 9726, which was smaller than the ecological carrying capacity of 12894. The facilities and spatial capacity were identified as key factors to limit the tourist carrying capacity in Qingliang Mountain. Some advices and measures including newly built and rebuilt basic facilities, construction of management methods for slack and peak tourist season respectively, construction of new sight spot and touring path were discussed to improve the tourist carrying capacity of Qingliang Mountain and solve the problems of overloading of tourists in the peak season.

Analysis of Load-Carrying Capacity for Redundant Free-Floating Space Manipulators in Trajectory Tracking Task

Directory of Open Access Journals (Sweden)

Qingxuan Jia

2014-01-01

Full Text Available The aim of this paper is to analyze load-carrying capacity of redundant free-floating space manipulators (FFSM in trajectory tracking task. Combined with the analysis of influential factors in load-carrying process, evaluation of maximum load-carrying capacity (MLCC is described as multiconstrained nonlinear programming problem. An efficient algorithm based on repeated line search within discontinuous feasible region is presented to determine MLCC for a given trajectory of the end-effector and corresponding joint path. Then, considering the influence of MLCC caused by different initial configurations for the starting point of given trajectory, a kind of maximum payload initial configuration planning method is proposed by using PSO algorithm. Simulations are performed for a particular trajectory tracking task of the 7-DOF space manipulator, of which MLCC is evaluated quantitatively. By in-depth research of the simulation results, significant gap between the values of MLCC when using different initial configurations is analyzed, and the discontinuity of allowable load-carrying capacity is illustrated. The proposed analytical method can be taken as theoretical foundation of feasibility analysis, trajectory optimization, and optimal control of trajectory tracking task in on-orbit load-carrying operations.

[Measuring water ecological carrying capacity with the ecosystem-service-based ecological footprint (ESEF) method: Theory, models and application].

Science.gov (United States)

Jiao, Wen-jun; Min, Qing-wen; Li, Wen-hua; Fuller, Anthony M

2015-04-01

Integrated watershed management based on aquatic ecosystems has been increasingly acknowledged. Such a change in the philosophy of water environment management requires recognizing the carrying capacity of aquatic ecosystems for human society from a more general perspective. The concept of the water ecological carrying capacity is therefore put forward, which considers both water resources and water environment, connects socio-economic development to aquatic ecosystems and provides strong support for integrated watershed management. In this paper, the authors proposed an ESEF-based measure of water ecological carrying capacity and constructed ESEF-based models of water ecological footprint and capacity, aiming to evaluate water ecological carrying capacity with footprint methods. A regional model of Taihu Lake Basin was constructed and applied to evaluate the water ecological carrying capacity in Changzhou City which located in the upper reaches of the basin. Results showed that human demand for water ecosystem services in this city had exceeded the supply capacity of local aquatic ecosystems and the significant gap between demand and supply had jeopardized the sustainability of local aquatic ecosystems. Considering aqua-product provision, water supply and pollutant absorption in an integrated way, the scale of population and economy aquatic ecosystems in Changzhou could bear only 54% of the current status.

Assessing the Social Carrying Capacity of Diving Sites in Mabul Island, Malaysia

Science.gov (United States)

Zhang, Liye; Chung, ShanShan

2015-12-01

This study has explored social carrying capacity of an underwater environment based on divers' perceived crowding. Two dimensions were assessed, the number of divers seen and the proximity of diver. Data were obtained from a survey of 132 divers dived in Mabul Island, Malaysia during 2013-2014. Photographs depicting four levels of diver number and four levels of diver proximity in different combinations were shown to the respondents for assessing their acceptability. Between the two variables, the "number of divers" was the most influential factor for divers' perceived crowding. Divers would start to feel unacceptably crowded if 8-9 divers were visible to them at one time. Based on this, it is likely that the use level of diving sites in Mabul Island has already exceeded its social carrying capacity. Implications for future research and diving tourism management for Mabul Island are also discussed in the paper.

Assessing the Social Carrying Capacity of Diving Sites in Mabul Island, Malaysia.

Science.gov (United States)

Zhang, Liye; Chung, ShanShan

2015-12-01

This study has explored social carrying capacity of an underwater environment based on divers' perceived crowding. Two dimensions were assessed, the number of divers seen and the proximity of diver. Data were obtained from a survey of 132 divers dived in Mabul Island, Malaysia during 2013-2014. Photographs depicting four levels of diver number and four levels of diver proximity in different combinations were shown to the respondents for assessing their acceptability. Between the two variables, the "number of divers" was the most influential factor for divers' perceived crowding. Divers would start to feel unacceptably crowded if 8-9 divers were visible to them at one time. Based on this, it is likely that the use level of diving sites in Mabul Island has already exceeded its social carrying capacity. Implications for future research and diving tourism management for Mabul Island are also discussed in the paper.

Study on the carry capacity of edible jellyfish fishery in Liaodong Bay

Science.gov (United States)

You, Kui; Bian, Yongning; Ma, Caihua; Chi, Xupeng; Liu, Zhiqiang; Zhang, Yuyu

2016-06-01

Jellyfish fishing is a special type of fishery that mainly exists in some countries of East and Southeast Asia. China has the largest jellyfish fishery yield in the world with an annual harvest of around 300 thousand tons. Liaodong Bay is the most important jellyfish fishery ground in China. However, due to the high benefits of jellyfish fishery, which leads to illegal and out-of-season jellyfish fishing occurring each year in Liaodong Bay. Illegal jellyfish fishery in Liaodong Bay is a typical example of the tragedy of the commons. The key problem is that fishermen seek to an illegally initiate jellyfish fishing as early as possible. In this paper, basing on the data of edible jellyfish's biology and ecology, we mainly analyzed the history of jellyfish fishery in China, especially in Liaodong bay, and then we calculated the carry capacity of edible jellyfish in Liaodong Bay which is about 300 thousand tons one year. This number is equal to the recent annual yield of edible jellyfish in China. Furthermore, basing on the carry capacity and reasonable quotas price analysis, we set up a Jellyfish fishing quotas and deficit quotas buyback system which could be a suitable and effective solution for jellyfish fishery management and development in Liaodong Bay at the underlying roots. Although China is the first country with edible jellyfish aquaculture, the annual yield of jellyfish aquaculture is only one fifth of jellyfish fishing. So, there is a very bright developing prospect about edible jellyfish aquaculture in China.

The scaling of population persistence with carrying capacity does not asymptote in populations of a fish experiencing extreme climate variability.

Science.gov (United States)

White, Richard S A; Wintle, Brendan A; McHugh, Peter A; Booker, Douglas J; McIntosh, Angus R

2017-06-14

Despite growing concerns regarding increasing frequency of extreme climate events and declining population sizes, the influence of environmental stochasticity on the relationship between population carrying capacity and time-to-extinction has received little empirical attention. While time-to-extinction increases exponentially with carrying capacity in constant environments, theoretical models suggest increasing environmental stochasticity causes asymptotic scaling, thus making minimum viable carrying capacity vastly uncertain in variable environments. Using empirical estimates of environmental stochasticity in fish metapopulations, we showed that increasing environmental stochasticity resulting from extreme droughts was insufficient to create asymptotic scaling of time-to-extinction with carrying capacity in local populations as predicted by theory. Local time-to-extinction increased with carrying capacity due to declining sensitivity to demographic stochasticity, and the slope of this relationship declined significantly as environmental stochasticity increased. However, recent 1 in 25 yr extreme droughts were insufficient to extirpate populations with large carrying capacity. Consequently, large populations may be more resilient to environmental stochasticity than previously thought. The lack of carrying capacity-related asymptotes in persistence under extreme climate variability reveals how small populations affected by habitat loss or overharvesting, may be disproportionately threatened by increases in extreme climate events with global warming. © 2017 The Author(s).

Ecological Carrying Capacity of Land Use Changes in Da'an City

Science.gov (United States)

Wang, H.; Zhang, J.; Li, B.

2018-04-01

Based on GIS and RS technology, this paper analyzed the land use change in Da'an city from 1995 to 2010. land-use ecological evaluation index was constructed to evaluate the land-use ecological risk of Da 'an city dynamically, and the land-use ecological risk level map was made, and then the distribution and change of the land-use ecological carrying capacity pattern of Da'an city were analyzed qualitatively. According to the evaluation results of ecological carrying capacity, the ecological environment of Da'an city has deteriorated in fifteen years. in 1995, the poor ecological environment area is mainly distributed in the northeast area of Da'an city, and the area is small, while the area of the central and southern areas is large; In 2010, the western region also appeared environmental degradation, the northeast environment deterioration is serious, the dominant area is reduced, and a small amount of deterioration in the central and southern regions. According to the study of this paper, in the future, we should strengthen the comprehensive management of this part of the area, strengthen vegetation coverage, reduce soil erosion, ensure the effective improvement of ecological environment.

Graphene-on-diamond devices with increased current-carrying capacity: carbon sp2-on-sp3 technology.

Science.gov (United States)

Yu, Jie; Liu, Guanxiong; Sumant, Anirudha V; Goyal, Vivek; Balandin, Alexander A

2012-03-14

Graphene demonstrated potential for practical applications owing to its excellent electronic and thermal properties. Typical graphene field-effect transistors and interconnects built on conventional SiO(2)/Si substrates reveal the breakdown current density on the order of 1 μA/nm(2) (i.e., 10(8) A/cm(2)), which is ~100× larger than the fundamental limit for the metals but still smaller than the maximum achieved in carbon nanotubes. We show that by replacing SiO(2) with synthetic diamond, one can substantially increase the current-carrying capacity of graphene to as high as ~18 μA/nm(2) even at ambient conditions. Our results indicate that graphene's current-induced breakdown is thermally activated. We also found that the current carrying capacity of graphene can be improved not only on the single-crystal diamond substrates but also on an inexpensive ultrananocrystalline diamond, which can be produced in a process compatible with a conventional Si technology. The latter was attributed to the decreased thermal resistance of the ultrananocrystalline diamond layer at elevated temperatures. The obtained results are important for graphene's applications in high-frequency transistors, interconnects, and transparent electrodes and can lead to the new planar sp(2)-on-sp(3) carbon-on-carbon technology. © 2012 American Chemical Society

Evaluation of Water Resources Carrying Capacity in Shandong Province Based on Fuzzy Comprehensive Evaluation

Directory of Open Access Journals (Sweden)

Zhao Qiang

2018-01-01

Full Text Available Water resources carrying capacity is the maximum available water resources supporting by the social and economic development. Based on investigating and statisticing on the current situation of water resources in Shandong Province, this paper selects 13 factors including per capita water resources, water resources utilization, water supply modulus, rainfall, per capita GDP, population density, per capita water consumption, water consumption per million yuan, The water consumption of industrial output value, the agricultural output value of farmland, the irrigation rate of cultivated land, the water consumption rate of ecological environment and the forest coverage rate were used as the evaluation factors. Then,the fuzzy comprehensive evaluation model was used to analyze the water resources carrying capacity Force status evaluation. The results showed : The comprehensive evaluation results of water resources in Shandong Province were lower than 0.6 in 2001-2009 and higher than 0.6 in 2010-2015, which indicating that the water resources carrying capacity of Shandong Province has been improved.; In addition, most of the years a value of less than 0.6, individual years below 0.4, the interannual changes are relatively large, from that we can see the level of water resources is generally weak, the greater the interannual changes in Shandong Province.

Ecological carrying capacity assessment of diving site: A case study of Mabul Island, Malaysia.

Science.gov (United States)

Zhang, Li-Ye; Chung, Shan-Shan; Qiu, Jian-Wen

2016-12-01

Despite considered a non-consumptive use of the marine environment, diving-related activities can cause damages to coral reefs. It is imminent to assess the maximum numbers of divers that can be accommodated by a diving site before it is subject to irreversible deterioration. This study aimed to assess the ecological carrying capacity of a diving site in Mabul Island, Malaysia. Photo-quadrat line transect method was used in the benthic survey. The ecological carrying capacity was assessed based on the relationship between the number of divers and the proportion of diver damaged hard corals in Mabul Island. The results indicated that the proportion of diver damaged hard corals occurred exponentially with increasing use. The ecological carrying capacity of Mabul Island is 15,600-16,800 divers per diving site per year at current levels of diver education and training with a quarterly threshold of 3900-4200 per site. Our calculation shows that management intervention (e.g. limiting diving) is justified at 8-14% of hard coral damage. In addition, the use of coral reef dominated diving sites should be managed according to their sensitivity to diver damage and the depth of the reefs. Copyright © 2016 Elsevier Ltd. All rights reserved.

Thermal loss of life and load-carrying capacity of marine induction motors

International Nuclear Information System (INIS)

Gnacinski, P.

2014-01-01

Highlights: • The effect of voltage quality on induction motors is investigated. • Power quality significantly affects machine lifetime and load-carrying capacity. • Permissible load levels for induction motors are proposed. - Abstract: This work deals with the effect of a lowered voltage quality on the thermal loss of life and load-carrying capacity of marine induction cage machines. Results of experimental investigations and computer calculations are presented for two low power induction motors with different properties. One of them has a comparatively strongly-saturated magnetic circuit and is especially exposed to the risk of overheating under overvoltage. The other machine has a comparatively weakly-saturated magnetic circuit, and is especially sensitive to undervoltage. The induction motor lifetime expectancy is also estimated on the basis of the temperature coefficient of power quality, whose value is proportional to the windings temperature rise in induction motors especially sensitive to various power quality disturbances. The dependence of the temperature coefficient of power quality and permissible loads for induction motors supplied with voltages of lowered quality is proposed

Hyperspectral Biofilm Classification Analysis for Carrying Capacity of Migratory Birds in the South Bay Salt Ponds

Science.gov (United States)

Hsu, Wei-Chen; Kuss, Amber Jean; Ketron, Tyler; Nguyen, Andrew; Remar, Alex Covello; Newcomer, Michelle; Fleming, Erich; Debout, Leslie; Debout, Brad; Detweiler, Angela;

What is the carrying capacity for fish in the ocean? A meta analysis of population dynamics of North Atlantic cod

DEFF Research Database (Denmark)

Myers, R.A.; MacKenzie, Brian; Bowen, K.G.

2001-01-01

used empirical Bayes techniques to estimate the maximum reproductive rate and carrying capacity of each stock. In all cases, the empirical Bayes estimates were biologically reasonable, whereas a stock by stock analysis occasionally yielded nonsensical parameter estimates (e.g., infinite values). Our...... analysis showed that the carrying capacity per unit area varied by more than 20-fold among populations and that much of this variation was related to temperature. That is, the carrying capacity per square kilometre declines as temperature increases....

Estimating carrying capacity in a newly colonized sand fly Lutzomyia serrana (Diptera: Psychodidae).

Science.gov (United States)

Santamaría, Erika; Munstermann, Leonard E; Ferro, Cristina

2002-02-01

The phlebotomine sand fly Lutzomyia serrana (Damasceno & Arouck) was mass-reared tinder conditions of varying densities in an effort to improve colony production efficiency. To do this, the experimental carrying capacity of a standard rearing chamber was determined, i.e., the optimum population size in relation to density (individuals per unit of space). Rearing chambers of 100 cm3 were populated with 1-50 L. serrana engorged females and an equal number of males. Laboratory conditions were maintained at 23-26 degrees C and 85-95% RH. The following parameters were recorded for each experimental chamber (three replicates): (1) female mortality without oviposition, (2) number of eggs oviposited and (3) number of adults emerging from the egg cohort. Female mortality began to increase substantially in the 26-female chamber, from 5.7% to 15% and finally reaching 60.2% in the 46-50 female chambers. In the chambers containing 1-20 females, egg number and realized adult progeny increased linearly to reach an asymptote. In the 20-50 female chambers, the number of eggs ranged from 420 to 699, and adult production from 306 to 432. The optimum carrying capacity for the 100-cm3 chambers was 22 +/- 2 females. Beyond this number, auto-regulation was initiated, i.e., female mortality without oviposition increased as the number of females per chamber increased. Total number of eggs and adult production was similar in all chambers containing 20-50 females. In conclusion, for optimizing production of mass reared sand flies, determination of the carrying capacity is essential to optimize use of insectary resources, to avoid loss of valuable potentially ovipositing females, and to increase overall production efficiency.

On load carrying capacity of frames taking into account finite displacements

International Nuclear Information System (INIS)

Borkoaski, A.; Saran, M.

1981-01-01

An approximate method that takes into account the influence of finite displacements upon the load carrying capacity of planar unbraced frames is described. It is the iterative procedure where Quadratic Programming is applied for evaluation of subsequent configurations of the frame, whereas Linear Programming serves to find ultimate load factors for each configuration. Numerical tests show that the procedure gives practically acceptable results being at the same time much cheaper than the exact geometrically and physically non-linear incremental analysis. (orig.)

Price and prospects for oil: carrying the burden of excess capacity in the 1980s and beyond

Energy Technology Data Exchange (ETDEWEB)

Goldstein, W

1985-12-01

The continuing decline in world oil prices will not be halted in the short term, and prospects for the long run are not encouraging. There is a problem of unprecedented gravity in the surplus capacity of the oil industry. A glut of 10 million bbl/day of crude oil remains unsold, the cohesion of the OPEC cartel is becoming more strained, and a sizeable proportion of refinery plant has been taken off-stream. The basic difficulty is that high interest rates have curbed international capital formation and depressed demand. Upward pressures on the US dollar have been created by the deficit on US domestic and external accounts, and have retarded the recovery of the global economy. Today, the cost of money exceeds the factor price of oil, and the market is highly unstable. The devastating costs of carrying surplus capacity are likely to survive through the 1980s. 6 figures.

Analysis of Carrying Capacity of Agro-Ecosystem Coconut-Cattle in South Minahasa Regency

Directory of Open Access Journals (Sweden)

AHS Salendu

2012-01-01

Full Text Available Abstract. Coconut plantation is very dominating in South Minahasa regency seen from its production of 49,907.33 tons in 2010. The land under coconut trees can be used for food crops or forage. The waste from food crops is the source of animal feed, while the livestock’s manure is used to improve soil fertility under coconut tree. The research objective was to analyse the carrying capacity of the agro-ecosystem of coconut-cattle. Regency and district were determined purposively. A total of 86 farmers as respondents were determined based on the ownership of at least 2 cattle and cattle selling experience. Data were analyzed using effective potential of livestock development and land capability index (IDD. The result showed that the maximum potential of land resources (PMSL was 30,872.94 animal unit (AU. The capacity increase in cattle population based on the soil resources was 18,208.94 AU. The maximum potential based on farmer house holds was 127,023.00 AU. The value of land capability index was 2.14. The conclusion was South Minahasa Regency was still potential for cattle development regarding land resources or workforce potentials. Development of cattle can be integrated with the coconut to maintain and improve agro-ecosystem sustainability of coconut plantation. Keywords: cattle, carrying capacity, agro-ecosystem, coconut Animal Production 14(1:56-62, January 2012

Rapid Population Growth and Human Carrying Capacity: Two Perspectives. World Bank Staff Working Papers No. 690 and Population and Development Series No. 15.

Science.gov (United States)

Mahar, Dennis J., Ed.; And Others

Two perspectives on carrying capacity and population growth are examined. The first perspective, "Carrying Capacity and Rapid Population Growth: Definition, Cases, and Consequences" (Robert Muscat), explores the possible meanings of the idea of carrying capacity under developing country conditions, looks at historical and present-day cases of…

A Study on Load Carrying Capacity of Fly Ash Based Polymer Concrete Columns Strengthened Using Double Layer GFRP Wrapping

Directory of Open Access Journals (Sweden)

S. Nagan

2014-01-01

Full Text Available This paper investigates the suitability of glass fiber reinforced polymer (GFRP sheets in strengthening of fly ash based polymer members under compression. Experimental results revealed that load carrying capacity of the confined columns increases with GFRP sheets wrapping. Altogether 18 specimens of M30 and G30 grade short columns were fabricated. The G30 specimens were prepared separately in 8 molarity and 12 molarity of sodium hydroxide concentration. Twelve specimens for low calcium fly ash based reinforced polymer concrete and six specimens of ordinary Portland cement reinforced concrete were cast. Three specimens from each molarity fly ash based reinforced polymer concrete and ordinary Portland cement reinforced concrete were wrapped with double layer of GFRP sheets. The load carrying capacity of fly ash based polymer concrete was tested and compared with control specimens. The results show increase in load carrying capacity and ductility index for all strengthened elements. The maximum increase in load carrying capacity was 68.53% and is observed in strengthened G30 specimens.

GIS and agent based spatial-temporal simulation modeling for assessing tourism social carrying capacity: a study on Mount Emei scenic area, China

Science.gov (United States)

Zhang, Renjun

2007-06-01

Each scenic area can sustain a specific level of acceptance of tourist development and use, beyond which further development can result in socio-cultural deterioration or a decline in the quality of the experience gained by visitors. This specific level is called carrying capacity. Social carrying capacity can be defined as the maximum level of use (in terms of numbers and activities) that can be absorbed by an area without an unacceptable decline in the quality of experience of visitors and without an unacceptable adverse impact on the society of the area. It is difficult to assess the carrying capacity, because the carrying capacity is determined by not only the number of visitors, but also the time, the type of the recreation, the characters of each individual and the physical environment. The objective of this study is to build a spatial-temporal simulation model to simulate the spatial-temporal distribution of tourists. This model is a tourist spatial behaviors simulator (TSBS). Based on TSBS, the changes of each visitor's travel patterns such as location, cost, and other states data are recoded in a state table. By analyzing this table, the intensity of the tourist use in any area can be calculated; the changes of the quality of tourism experience can be quantized and analyzed. So based on this micro simulation method the social carrying capacity can be assessed more accurately, can be monitored proactively and managed adaptively. In this paper, the carrying capacity of Mount Emei scenic area is analyzed as followed: The author selected the intensity of the crowd as the monitoring Indicators. it is regarded that longer waiting time means more crowded. TSBS was used to simulate the spatial-temporal distribution of tourists. the average of waiting time all the visitors is calculated. And then the author assessed the social carrying capacity of Mount Emei scenic area, found the key factors have impacted on social carrying capacity. The results show that the TSBS

攀枝花市旅游人口承载容量研究%Research of Tourist Population Carrying Capacity in Panzhihua City

Institute of Scientific and Technical Information of China (English)

孔博; 邓伟; 刘邵权; 陶和平; 刘颖

2011-01-01

选择四川省攀枝花市典型旅游城市5县19个景点作为研究对象,通过分析空间、社会、经济作为三大主要旅游人口容量的影响因子,并改进了社会容量方法,定量分析了攀枝花市旅游人口承载容量。研究表明,空间承载容量成为制约攀枝花市景区发展并限制接待游客容量的主要因素,主要包括旅游线路不发达,景区内可达面积小。本研究有助于丰富和完善旅游人口承载容量的理论和研究体系,可为当地的生态环境保护和旅游开发建设提供科学依据。%Five counties,including 19 scenic spots,which have features of typical tourism city,in Panzhihua city,Sichuan province,were chosen for the study of the tourism carrying capacity.To quantitatively analyze the tourism carrying capacity of the five counties,the three main factors,which were spatial carrying capacity,social carrying capacity,and economic carrying capacity,were studied and the model of the social carrying capacity was improved.The spatial carrying capacity became the main barrier to limit the reception visitor carrying capacity and restrict the development of Panzhihua scenic area,the main reasons included inconvenient tourism route and traffic transportation,the small developed reachable area.It can accelerate the establishment of economic effect and environmental effect of local tourism industry.

Multi-scale research of time and space differences about ecological footprint and ecological carrying capacity of the water resources

Science.gov (United States)

Li, Jiahong; Lei, Xiaohui; Fu, Qiang; Li, Tianxiao; Qiao, Yu; Chen, Lei; Liao, Weihong

2018-03-01

A multi-scale assessment framework for assessing and comparing the water resource sustainability based on the ecological footprint (EF) is introduced. The study aims to manage the water resource from different views in Heilongjiang Province. First of all, from the scale of each city, the water ecological carrying capacity (ECC) was calculated from 2000 to 2011, and map the spatial distribution of the recent 3 years which show that, the water ecological carrying capacity (ECC) is uneven and has a downward trend year by year. Then, from the perspective of the five secondary partition basins in Heilongjiang Province, the paper calculated the ecological carrying capacity (ECC), the ecological footprint (EF) and ecological surplus and deficit (S&D) situation of water resources from 2000 to 2011, which show that the ecological deficit situation is more prominent in Nenjiang and Suifenhe basins which are in an unsustainable development state. Finally, from the perspective of the province, the paper calculated the ecological carrying capacity (ECC), the ecological footprint (EF) and ecological S&D of water resources from 2000 to 2011 in Heilongjiang Province, which show that the ecological footprint (EF) is in the rising trend, and the correlation coefficient between the ecological carrying capacity (ECC) and the precipitation is 0.8. There are 5 years of unsustainable development state in Heilongjiang. The proposed multi-scale assessment of WEF aims to evaluate the complex relationship between water resource supply and consumption in different spatial scales and time series. It also provides more reasonable assessment result which can be used by managers and regulators.

Conceptual Framework of Tourism Carrying Capacity for a Tourism City: Experiences from National Parks in the United States

Institute of Scientific and Technical Information of China (English)

Zheng Nasha; Zheng Xilai

2010-01-01

There is no universally-accepted definition of tourism carrying capacity(TCC).Numerical TCC focuses on use level and is considered as"a magic number"of the saturation point for tourism.There are several reasons why numerical tourism capacity is inadequate.Alternatively,tourism capacity can be defined in terms of limits of acceptable change,which shifts the focus from"how much use is too much"to"how much change is acceptable".This article proposes an improved conceptual framework for evaluating carrying capacity for the tourism city based on approaches used in US national parks,which consider the impact of human use on a city's economic,environmental/resource,and socio-cultural conditions.Based on the basic data of indicator values and relevant standards,the framework monitors the current indicators and predicts future indicator values; it can also be used to assess and predict TCC.

Relationships between nutritional condition of adult females and relative carrying capacity for rocky mountain Elk

Science.gov (United States)

Piasecke, J.R.; Bender, L.C.

2009-01-01

Lactation can have significant costs to individual and population-level productivity because of the high energetic demands it places on dams. Because the difference in condition between lactating and dry Rocky Mountain elk (Cervus elaphus nelsoni) cows tends to disappear as nutritional quality rises, the magnitude of that difference could be used to relate condition to habitat quality or the capability of habitats to support elk. We therefore compared nutritional condition of ???2.5-yr-old lactating and dry cows from six free-ranging RockyMountain elk populations throughout the United States.Our goal was to quantify differential accrual of body fat (BF) reserves to determine whether the condition of dry and lactating cows could be used to define relevant management thresholds of habitat quality (i.e., relative carrying capacity) and consequently potential performance of elk populations. Levels of BF that lactating cows were able to accrue in autumn and the proportional difference in BF between dry and lactating cows in autumn were related (F 1-2,10???16.2, Plogistic model to predict relative proximity to ecological carrying capacity (ECC), our population-years ranged from3-97%ofECCand proportion of the population lactating (an index of calf survival) was negatively related to proportion of ECC. Results indicate that the proportional difference in accrual of BF between lactating and dry cows can provide a sensitive index to where elk populations reside relative to the quality of their range.

承德市旅游环境承载力分析%Analysis of Tourism Environment Carrying Capacity of Chengde City

Institute of Scientific and Technical Information of China (English)

贾紫牧; 曾维华

2016-01-01

With the rapid expansion of domestic tourism demands,the number of tourists had increased dramatically.Relatively poor facilities and services led to overload of the tourism environment carrying capacity.Eleven most attractive scenic spots in Chengde City were chosen to quantitatively analyze resource carrying capacity,environment carrying capacity and psychological carrying capacity.Then,tourism environment carrying capacity of Chengde City was calculated by use of Buckets effect.The results showed that carrying capacity of the tourism environment of Chengde City was about 29.93 million tourists per year and almost reached to saturation with the increase of tourists year by year.%我国旅游需求快速膨胀,游客数量急剧增加,但配套设施及管理、服务水平相对落后,旅游环境超负荷承栽.选择承德市11个最具吸引力的景区,综合考虑资源、环境和心理3个维度,定量分析各承载力分量,在此基础上根据“木桶原理”确定承德市旅游环境承载力.研究表明:承德市全年的旅游环境承栽力约为2993万人,随着游客人数逐年递增,旅游环境承载力已接近饱和.

Recreation Carrying Capacity Facts and Considerations. Report 11. Surry Mountain Lake Project Area.

Science.gov (United States)

1980-07-01

contributions of practical experience and knowledge , along with their assistance in arranging schedules, have made this carrying capacity research effort...This survey obtained six responses from boaters and water- skiers . 29 A~ .~ ~ ~ ~ ~ ~ ~ ~~~~~~~PEEI PAG ... ._DIAN.K+.+.+ 3+ ,.+ -,++ + _-NO FILM...User characteristics Table 17 indicates the characteristics of the boaters and water- skiers surveyed at Surry. The small sample size at

楼观台森林公园旅游环境容量研究%Tourism Environmental Carrying Capacity of Louguantai Forest Park

Institute of Scientific and Technical Information of China (English)

张晓慧; 陈强

2011-01-01

综合旅游空间容量、旅游生态容量、旅游设施容量、旅游心理容量4个因素,对楼观台国家森林公园旅游环境容量进行了测算,通过对比发现楼观台森林公园游客接待量远小于理论旅游环境容量,并对造成这种现状的主要原因进行了分析,提出了相关建议.%In this paper, an integrated estimation on the tourism environmental carrying capacity of Louguantai National Forest Park was made from the aspects of ecological carrying capacity, spatial carrying capacity, facility carrying capacity, and psychological carrying capacity. It was found that the number of reception tourists in the park was far less than its theoretical predication tourism environment capacity. Main reasons were analysised and some suggestions were proposed.

ENVIRONMENTAL CARRYING CAPACITY BASED ON LAND BALANCE FOR EVALUATION PLANNING OF SPATIAL AND REGIONAL IN SOLOK REGENCY, WEST SUMATRA

Directory of Open Access Journals (Sweden)

Alvan Pahuluan

2017-05-01

Full Text Available Act No. 26 of 2007 on Spatial Planning stated that the central and the local government should establish Spatial and Regional Planning (RTRW by considering environmental carrying capacity. The environmental carrying capacity based RTRW will ensure the balance between the use of natural resources and the prevention of negative impacts on the environment. The objective of this study was to evaluate the implementation of RTRW at Solok Regency Year 2012 - 2031 which has been established in 2013. Evaluation was conducted by calculating land carrying capacity method to determine land supply and land demand. The results showed that the land use planned as stated in the RTRW increase the land supply in supporting bio-product production to meet the needs of the population, with surplus conditions amounted to 101,005.79 hectares. The future predictions indicated that the carrying capacity of planned land could met the needs of the population bio-product until the year 2121. The evaluation of the spatial pattern plan showed that there was a need to increase the area of housing and settlements in accordance with the rate of population increase and determine the extents area for the development of the livestock sector to improve its yield.

Concept of perceptual carrying capacity and its use in the creation of promotional materials of tourist destination

Directory of Open Access Journals (Sweden)

Stanislav Mokrý

2013-01-01

Full Text Available The aim of this article is to introduce results of research of perceptual carrying capacity of selected area. Concept of perceptual tourist carrying capacity aims to find the number of visitors of tourist destination that the visitor is willing to accept before deciding to prefer travelling to another tourist destination. In order to determine the perceptual carrying capacity the visual method is used. The photos of destination that depict different level of visitors are presented to respondents when using this method. The primary research method used in this investigation was the questionnaire survey which was conducted via online questionnaires. The questionnaire used computer-generated images that depict different number of visitors of the particular destination – nature trail around the church of St. John of Nepomuk in Žďár nad Sázavou (UNESCO monument. The questionnaire also contained samples of photos taken from photo gallery section of CzechTourism agency (photo.czechtourism.com, which were used to determine the preferred destination for recreation. The survey was conducted within the period from May 2012 to July 2012 on a sample of 736 respondents from The Czech Republic.

The Application of a Phosphorus Budget Model Estimating the Carrying Capacity of Kesikköprü Dam Lake

OpenAIRE

PULATSÜ, Serap

2014-01-01

The aim of this study was to estimate the carrying capacity of Kesikköprü Dam Lake, Ankara, where cage farms for the intensive culture of rainbow trout are located. For this purpose Dillon and Rigler's phosphorus budget model was applied in a series of steps and the carrying capacity of the lake was found to be 3335 tonnes per year. This estimated value was about 10 times higher than the present production level of the lake. It seems possible to orientate the fish culture in cages in...

BLOOD SUBSTITUTES: EVOLUTION FROM NON-CARRYING TO OXYGEN AND GAS CARRYING FLUIDS

Science.gov (United States)

Cabrales, Pedro; Intaglietta, Marcos

2013-01-01

The development of oxygen (O2) carrying blood substitutes has evolved from the goal of replicating blood O2 transports properties to that of preserving microvascular and organ function, reducing the inherent or potential toxicity of the material used to carry O2, and treating pathologies initiated by anemia and hypoxia. Furthermore, the emphasis has shifted from blood replacement fluid to “O2 therapeutics” that restore tissue oxygenation to specific tissues regions. This review covers the different alternatives, potential and limitations of hemoglobin based O2 carriers (HBOCs) and perfluorocarbon based O2 carriers (PFCOCs), with emphasis on the physiological conditions disturbed in the situation that they will be used. It describes how concepts learned from plasma expanders without O2 carrying capacity can be applied to maintain O2 delivery and summarizes the microvascular responses due to HBOCs and PFCOCs. This review also presents alternative applications of HBOCs and PFCOCs namely: 1) How HBOC O2 affinity can be engineered to target O2 delivery to hypoxic tissues; and 2) How the high gas solubility of PFCOCs provides new opportunities for carrying, dissolving and delivering gases with biological activity. It is concluded that current blood substitutes development has amplified their applications horizon by devising therapeutic functions for oxygen carriers requiring limited O2 delivery capacity restoration. Conversely, full, blood-like O2 carrying capacity re-establishment awaits control of O2 carrier toxicity. PMID:23820271

Load carrying capacity of shear wall t-connections reinforced with high strength wire ropes

DEFF Research Database (Denmark)

Jørgensen, Henrik B.; Bryndom, Thor; Larsen, Michael

2016-01-01

-friendly solution. The wire ropes have no bending stiffness and therefore allow for an easier vertical installation of the wall elements. During the last 10 – 15 years, a number of shear tests on plane wire rope connections have been carried out. However, to the best knowledge of the authors, tests on wire rope......Traditionally, U-bar loop connections with keyed joints have been used in vertical shear connections between precast concrete wall elements. However, in the recent years, connections with looped high strength wire ropes instead of U-bar loops have proven to be a much more construction...... connections for assembly of precast elements in different planes, such as T- and L-connections, have not yet been published. This paper presents the results of a large test series recently conducted at the University of Southern Denmark to study the shear behaviour of high strength wire rope T...

Carrying capacity and tourism planning. case study at Praia Brava- Itajai, in face to the settlement of Canto da Brava Resort

Directory of Open Access Journals (Sweden)

Doris Van de Meene Ruschmann

2008-05-01

Full Text Available Sustainable tourism presumes cultural authenticity, social inclusion, conservation of natural resources and service quality. Those are major issues standing for economical viability in the long run. This article analyzes carrying capacity in Praia Brava, Itajai/SC, evaluating environmental comfort for dwellers as well as for users of the beach building future scenarios as Canto da Brava resort is settled. Tourism carrying capacity is tied to methods of identification and evaluation of environmental indicators. In this case, Cifuentes Method was chosen because it integrates physical, biotical and infra structural factors, through assessment of physical, real and effective carrying capacity. Quantitative results have been considered analyzing impacts and tolerable limits of change taking into account users perception.

Isotopic investigation of contemporary and historic changes in penguin trophic niches and carrying capacity of the southern Indian ocean.

Science.gov (United States)

Jaeger, Audrey; Cherel, Yves

2011-02-02

A temperature-defined regime shift occurred in the 1970s in the southern Indian Ocean, with simultaneous severe decreases in many predator populations. We tested a possible biological link between the regime shift and predator declines by measuring historic and contemporary feather isotopic signatures of seven penguin species with contrasted foraging strategies and inhabiting a large latitudinal range. We first showed that contemporary penguin isotopic variations and chlorophyll a concentration were positively correlated, suggesting the usefulness of predator δ¹³C values to track temporal changes in the ecosystem carrying capacity and its associated coupling to consumers. Having controlled for the Suess effect and for increase CO₂ in seawater, δ¹³C values of Antarctic penguins and of king penguins did not change over time, while δ¹³C of other subantarctic and subtropical species were lower in the 1970s. The data therefore suggest a decrease in ecosystem carrying capacity of the southern Indian Ocean during the temperature regime-shift in subtropical and subantarctic waters but not in the vicinity of the Polar Front and in southward high-Antarctic waters. The resulting lower secondary productivity could be the main driving force explaining the decline of subtropical and subantarctic (but not Antarctic) penguins that occurred in the 1970s. Feather δ¹⁵N values did not show a consistent temporal trend among species, suggesting no major change in penguins' diet. This study highlights the usefulness of developing long-term tissue sampling and data bases on isotopic signature of key marine organisms to track potential changes in their isotopic niches and in the carrying capacity of the environment.

Isotopic investigation of contemporary and historic changes in penguin trophic niches and carrying capacity of the southern Indian ocean.

Directory of Open Access Journals (Sweden)

Audrey Jaeger

Full Text Available A temperature-defined regime shift occurred in the 1970s in the southern Indian Ocean, with simultaneous severe decreases in many predator populations. We tested a possible biological link between the regime shift and predator declines by measuring historic and contemporary feather isotopic signatures of seven penguin species with contrasted foraging strategies and inhabiting a large latitudinal range. We first showed that contemporary penguin isotopic variations and chlorophyll a concentration were positively correlated, suggesting the usefulness of predator δ¹³C values to track temporal changes in the ecosystem carrying capacity and its associated coupling to consumers. Having controlled for the Suess effect and for increase CO₂ in seawater, δ¹³C values of Antarctic penguins and of king penguins did not change over time, while δ¹³C of other subantarctic and subtropical species were lower in the 1970s. The data therefore suggest a decrease in ecosystem carrying capacity of the southern Indian Ocean during the temperature regime-shift in subtropical and subantarctic waters but not in the vicinity of the Polar Front and in southward high-Antarctic waters. The resulting lower secondary productivity could be the main driving force explaining the decline of subtropical and subantarctic (but not Antarctic penguins that occurred in the 1970s. Feather δ¹⁵N values did not show a consistent temporal trend among species, suggesting no major change in penguins' diet. This study highlights the usefulness of developing long-term tissue sampling and data bases on isotopic signature of key marine organisms to track potential changes in their isotopic niches and in the carrying capacity of the environment.

Temperature dependences of growth rates and carrying capacities of marine bacteria depart from metabolic theoretical predictions

KAUST Repository

Huete-Stauffer, Tamara Megan; Arandia-Gorostidi, Nestor; Dí az-Pé rez, Laura; Moran, Xose Anxelu G.

2015-01-01

Using the metabolic theory of ecology (MTE) framework, we evaluated over a whole annual cycle the monthly responses to temperature of the growth rates (μ) and carrying capacities (K) of heterotrophic bacterioplankton at a temperate coastal site. We

福清旅游环境承载力研究%Study on the Carrying Capacity of Fuqing Tourism Environment

Institute of Scientific and Technical Information of China (English)

姜玲

2012-01-01

The policy of developing the economic zone on the west side of Taiwan strait has created a good opportunity for the development of tourism in Fujian. Due to its favorable geographical location, Fuqing will definitely become the beneficiary of the development. A significant growth in tourism is foreseeable. This paper analyzes the carrying capacity of Fuqing ecological environment, carrying capacity of resources space, residents＇ psychological carrying capacity as well as economic carrying capacity so as to find out the comprehensive environment carrying capacity. The obstacles to the development of tourism in Fuqing have been identified and countermeasures were provided in the hope of promoting Fuqing tourism industry.%海西建设的提出为福建旅游业发展带来了良好的契机,福清由于其优越的地理位置,势必会成为海西建设的受益者,旅游业必将会得到迅猛的发展,在这种前提下,本文通过对福清市的生态环境承载力、资源空间承载力、居民心理承载力和经济承载力的定量分析,得出了福清市的综合环境承载力,从而找出制约福清旅游业发展的主要因素,在此基础上提出相应的对策建议,以此来促进福清旅游业的发展。

Load Carrying Capacity of Shear Wall T-Connections Reinforced with High Strength Wire Ropes

DEFF Research Database (Denmark)

Jørgensen, Henrik Brøner; Bryndum, Thor; Larsen, Michael

2017-01-01

Traditionally, U-bar loop connections with keyed joints have been used in vertical shear connections between precast concrete wall elements. However, in the recent years, connections with looped high strength wire ropes instead of U-bar loops have proven to be a much more construction-friendly so......Traditionally, U-bar loop connections with keyed joints have been used in vertical shear connections between precast concrete wall elements. However, in the recent years, connections with looped high strength wire ropes instead of U-bar loops have proven to be a much more construction......-friendly solution. The wire ropes have no bending stiffness and therefore allow for an easier vertical installation of the wall elements. During the last 10 – 15 years, a number of shear tests on plane wire rope connections have been carried out. However, to the best knowledge of the authors, tests on wire rope...... connections for assembly of precast elements in different planes, such as T- and L-connections, have not yet been published. This paper presents the results of a large test series recently conducted at the University of Southern Denmark to study the shear behaviour of high strength wire rope T...

Spatiotemporal Distribution of β-Amyloid in Alzheimer Disease Is the Result of Heterogeneous Regional Carrying Capacities.

Science.gov (United States)

Whittington, Alex; Sharp, David J; Gunn, Roger N

2018-05-01

β-amyloid (Aβ) accumulation in the brain is 1 of 2 pathologic hallmarks of Alzheimer disease (AD), and the spatial distribution of Aβ has been studied extensively ex vivo. Methods: We applied mathematical modeling to Aβ in vivo PET imaging data to investigate competing theories of Aβ spread in AD. Results: Our results provided evidence that Aβ accumulation starts in all brain regions simultaneously and that its spatiotemporal distribution is due to heterogeneous regional carrying capacities (regional maximum possible concentration of Aβ) for the aggregated protein rather than to longer-term spreading from seed regions. Conclusion: The in vivo spatiotemporal distribution of Aβ in AD can be mathematically modeled using a logistic growth model in which the Aβ carrying capacity is heterogeneous across the brain but the exponential growth rate and time of half maximal Aβ concentration are constant. © 2018 by the Society of Nuclear Medicine and Molecular Imaging.

Estimating social carrying capacity through computer simulation modeling: an application to Arches National Park, Utah

Science.gov (United States)

Benjamin Wang; Robert E. Manning; Steven R. Lawson; William A. Valliere

2001-01-01

Recent research and management experience has led to several frameworks for defining and managing carrying capacity of national parks and related areas. These frameworks rely on monitoring indicator variables to ensure that standards of quality are maintained. The objective of this study was to develop a computer simulation model to estimate the relationships between...

Environment Carrying Capacity in Developing Innovation Center of Micro Small Medium Enterprises (MSME in Kabupaten Pandeglang, Banten Province

Directory of Open Access Journals (Sweden)

Muhlisin

2015-03-01

Full Text Available The study aims to determine environmental carrying capacity strategies for developing MSMEs Innovation Center. The study research using quantitative descriptive method and instruments questionnaire given to stakeholders and government related to sheep and goats in the Juhut village, Pandeglang. Data collected was processed premises scoring and Analytical Hierarchy Process (AHP method used software of expert choice 11. The results showed that the Carrying Capacity levels of MSME was in the quite category, while aspect of facilitation as the highest proportions and the lowest was access to information. Innovation Center of MSME strategies are through the efforts increased Environment Carrying Capacity’s variables of Innovation Center of MSME are still lacking or not meet the standards through synergy efforts by Ministry of Research of Technology and Higher Education, Provincial Government. Of Banten, district/municipal government, Institute for Agricultural Technology of Banten, and universities.

Optimizing the Regional Industrial Structure Based on the Environmental Carrying Capacity: An Inexact Fuzzy Multi-Objective Programming Model

Directory of Open Access Journals (Sweden)

Wenyi Wang

2013-12-01

Full Text Available An inexact fuzzy multi-objective programming model (IFMOP based on the environmental carrying capacity is provided for industrial structure optimization problems. In the IFMOP model, both fuzzy linear programming (FLP and inexact linear programming (ILP methods are introduced into a multi-objective programming framework. It allows uncertainties to be directly communicated into the problem solving processing, and it can effectively reflect the complexity and uncertainty of an industrial system without impractical simplification. The two objective functions utilized in the optimization study are the maximum total output value and population size, and the constraints include water environmental capacity, water resource supply, atmospheric environmental capacity and energy supply. The model is subsequently employed in a realistic case for industrial development in the Tongzhou district, Beijing, China. The results demonstrate that the model can help to analyze whether the environmental carrying capacity of Tongzhou can meet the needs of the social economic objectives in the new town plan in the two scenarios and can assist decision makers in generating stable and balanced industrial structure patterns with consideration of the resources, energy and environmental constraints to meet the maximum social economic efficiency.

1990s: High Capacity Backbones

Indian Academy of Sciences (India)

First page Back Continue Last page Overview Graphics. 1990s: High Capacity Backbones. Backbone capacities increased from 2.5 Gb/s to 100s of Gb/s during the 1990's. Wavelength division multiplexing with 160 waves of 10 Gb/s was commercially available. Several high-capacity backbones built in the US and Europe.

Methods for determining the carrying capacity of eccentrically compressed concrete elements

Directory of Open Access Journals (Sweden)

Starishko Ivan Nikolaevich

2014-04-01

Full Text Available The author presents the results of calculations of eccentrically compressed elements in the ultimate limit state of bearing capacity, taking into account all possiblestresses in the longitudinal reinforcement from the R to the R , caused by different values of eccentricity longitudinal force. The method of calculation is based on the simultaneous solution of the equilibrium equations of the longitudinal forces and internal forces with the equilibrium equations of bending moments in the ultimate limit state of the normal sections. Simultaneous solution of these equations, as well as additional equations, reflecting the stress-strain limit state elements, leads to the solution of a cubic equation with respect to height of uncracked concrete, or with respect to the carrying capacity. According to the author it is a significant advantage over the existing methods, in which the equilibrium equations using longitudinal forces obtained one value of the height, and the equilibrium equations of bending moments - another. Theoretical studies of the author, in this article and the reasons to calculate specific examples showed that a decrease in the eccentricity of the longitudinal force in the limiting state of eccentrically compressed concrete elements height uncracked concrete height increases, the tension in the longitudinal reinforcement area gradually (not abruptly goes from a state of tension compression, and load-bearing capacity of elements it increases, which is also confirmed by the experimental results. Designed journalist calculations of eccentrically compressed elements for 4 cases of eccentric compression, instead of 2 - as set out in the regulations, fully cover the entire spectrum of possible cases of the stress-strain limit state elements that comply with the European standards for reinforced concrete, in particular Eurocode 2 (2003.

Seasonal dynamics in wheel load-carrying capacity of a loam soil in the Swiss Plateau

DEFF Research Database (Denmark)

Gut, S.; Chervet, A.; Stettler, Matthias

2015-01-01

on in situ measurements of h, measurements of precompression stress at various h and simulations of soil stress. In this work, we concentrated on prevention of subsoil compaction. Calculations were made for different tyres (standard and low-pressure top tyres) and for soil under different tillage......Subsoil compaction is a major problem in modern agriculture caused by the intensification of agricultural production and the increase in weight of agricultural machinery. Compaction in the subsoil is highly persistent and leads to deterioration of soil functions. Wheel load-carrying capacity (WLCC......) is defined as the maximum wheel load for a specific tyre and inflation pressure that does not result in soil stress in excess of soil strength. The soil strength and hence WLCC is strongly influenced by soil matric potential (h). The aim of this study was to estimate the seasonal dynamics in WLCC based...

Water ecological carrying capacity of urban lakes in the context of rapid urbanization: A case study of East Lake in Wuhan

Science.gov (United States)

Ding, Lei; Chen, Kun-lun; Cheng, Sheng-gao; Wang, Xu

With the excessive development of social economy, water scarcity and water environment deterioration become a common phenomenon in metropolis. As a crucial component of urban water environment system, urban lake is mainly influenced by social economic system and tourism system. In this paper, a framework for quantitatively evaluating development sustainability of urban lake was established by a multi-objective model that represented water ecological carrying capacity (WECC). And nine key indicators including population, irrigation area, tourist quantity, the average number of hotel daily reception, TP, TN, CODMn, BOD5 were chosen from urban social-economy system and natural resilience aspects, with their index weight was determined by using the Structure Entropy Weight method. Then, we took Wuhan East Lake, the largest urban lake in China as a case study, and selected five time sections including 2002, 2004, 2007, 2009 and 2012 to synthetically evaluate and comparatively analyze the dynamic change of WECC. The results showed that: firstly, the water ecological carrying capacity values of the East Lake in five time sections were 1.17, 1.07, 1.64, 1.53 and 2.01 respectively, which all exceeded 1 and increased fluctuation. The rapid growth of population and GDP lead to sharply increasing demand for water quantity. However, a large amount of the domestic sewage and industrial waste led by economic development increases pressure on ecological environment of urban lakes. Secondly, the carrying capacity of the East Lake for tourist activities was still low. The value in 2012 was only 0.22, keeping at a slowly increasing phase, which indicates that the East Lake has large opportunity and space for developing the water resource carrying capacity and could make further efforts to attract tourists. Moreover, the WECC of the East Lake was mainly affected by rapid social and economic development and water environment damage caused by organic pollutants. From the view of urban

Characteristics and environmental carrying capacities of coastal area in Yogyakarta Special Region for aquaculture

Science.gov (United States)

Triyatmo, B.; Rustadi; Priyono, S. B.

2018-03-01

The purpose of this study were to determine characteristics and environmental carrying capacities of coastal area in Yogyakarta Special Region for aquaculture. This study was conducted in 2015 by characterizing land and water dynamics, land use, and the suitability of coastal environments for aquaculture. Evaluation on the coastal environments suitability for aquaculture ponds was based on the landforms, soil properties, water quality and land. Selection of coastal locations for aquaculture development was based on the level of suitability of coastal environment. The results showed that the coastal in Kulon Progo and Bantul Regencies were characterized by sand dune and beach ridge with sandy soil texture, while in Gunungkidul Regency was characterized by limestone hill with rocky texture. Water sources of the coastal area were the sea, river, and ground water with the salinity of 31–37, 7–11, 7–31 ppt and pH of 7.4–8.4 7.0–8.2 and 7.4–9.9, respectively. The coastal lands were used for seasonal/annual planting, ponds, fish landing sites, tourism areas and conservation areas. The coastal carrying capacity was rather suitable for aquaculture, especially in the sandy soil area. Aquaculture in that area can be done intensively for shrimp (Litopenaeus vannamei), using biocrete (biological material) or plastic sheet.

基于物元分析理论的旅游承载力研究%Study on Tourist Carrying Capacity Based on Matter Element Analysis

Institute of Scientific and Technical Information of China (English)

刘云国

2005-01-01

This paper proposes that it is necessary to implement the concept of tourist carrying capacity to facilitate the tourism planning, and presents a method to evaluate the carrying capacity. The method cailed matter element analysis can solve the uncertain a,nd incompatible problem of the evaluated factors in assessing carrying capacity.The current state of a destination s carrying capacity can be determined by establishing the standard indexes and the matter element model. Through the evaluating of the travel industry zones of the Autonomous Prefecture of Western Hunan, the method is proved to be simple and feasible, and it is improved to be significant for the tourism planning and determination as well as the sustainable development of the regional tourism.

Gun Carrying by High School Students in Boston, MA: Does Overestimation of Peer Gun Carrying Matter?

Science.gov (United States)

Hemenway, David; Vriniotis, Mary; Johnson, Renee M.; Miller, Matthew; Azrael, Deborah

2011-01-01

This paper investigates: (1) whether high school students overestimate gun carrying by their peers, and (2) whether those students who overestimate peer gun carrying are more likely to carry firearms. Data come from a randomly sampled survey conducted in 2008 of over 1700 high school students in Boston, MA. Over 5% of students reported carrying a…

Estimating a Global Hydrological Carrying Capacity Using GRACE Observed Water Stress

Science.gov (United States)

An, K.; Reager, J. T.; Famiglietti, J. S.

2013-12-01

Global population is expected to reach 9 billion people by the year 2050, causing increased demands for water and potential threats to human security. This study attempts to frame the overpopulation problem through a hydrological resources lens by hypothesizing that observed groundwater trends should be directly attributed to human water consumption. This study analyzes the relationships between available blue water, population, and cropland area on a global scale. Using satellite data from NASA's Gravity Recovery and Climate Experiment (GRACE) along with land surface model data from the Global Land Data Assimilation System (GLDAS), a global groundwater depletion trend is isolated, the validity of which has been verified in many regional studies. By using the inherent distributions of these relationships, we estimate the regional populations that have exceeded their local hydrological carrying capacity. Globally, these populations sum to ~3.5 billion people that are living in presently water-stressed or potentially water-scarce regions, and we estimate total cropland is exceeding a sustainable threshold by about 80 million km^2. Key study areas such as the North China Plain, northwest India, and Mexico City were qualitatively chosen for further analysis of regional water resources and policies, based on our distributions of water stress. These case studies are used to verify the groundwater level changes seen in the GRACE trend . Tfor the many populous, arid regions of the world that have already begun to experience the strains of high water demand.he many populous, arid regions of the world have already begun to experience the strains of high water demand. It will take a global cooperative effort of improving domestic and agricultural use efficiency, and summoning a political will to prioritize environmental issues to adapt to a thirstier planet. Global Groundwater Depletion Trend (Mar 2003-Dec 2011)

Evaluation of carrying capacity: Measure 7.1A of the Northwest Power Planning Council's 1994 Fish and Wildlife Program. Report 1 of 4, Final report

International Nuclear Information System (INIS)

Neitzel, D.A.; Johnson, G.E.

1996-05-01

This report is one of four that the Pacific Northwest National Laboratory (PNNL) staff prepared to address Measure 7.1A in the Northwest Power Planning Council's (Council) Fish and Wildlife Program (Program) dated december 1994 (NPPC 1994). Measure 7.1A calls for the Bonneville Power Administration (BPA) to fund an evaluation of salmon survival, ecology, carrying capacity, and limiting factors in freshwater, estuarine, and marine habitats. Additionally, the Measure asks for development of a study plan based on critical uncertainties and research needs identified during the evaluation. This report deals with the evaluation of carrying capacity. It describes the analysis of different views of capacity as it relates to salmon survival and abundance. The report ends with conclusions and recommendations for studying carrying capacity

Review of evaluation on ecological carrying capacity: The progress and trend of methodology

Science.gov (United States)

Wang, S. F.; Xu, Y.; Liu, T. J.; Ye, J. M.; Pan, B. L.; Chu, C.; Peng, Z. L.

2018-02-01

The ecological carrying capacity (ECC) has been regarded as an important reference to indicate the level of regional sustainable development since the very beginning of twenty-first century. By a brief review of the main progress in ECC evaluation methodologies in recent five years, this paper systematically discusses the features and differences of these methods and expounds the current states and future development trend of ECC methodology. The result shows that further exploration in terms of the dynamic, comprehensive and intelligent assessment technologies needs to be provided in order to form a unified and scientific ECC methodology system and to produce a reliable basis for environmental-economic decision-makings.

An Applied Method for Predicting the Load-Carrying Capacity in Compression of Thin-Wall Composite Structures with Impact Damage

Science.gov (United States)

Mitrofanov, O.; Pavelko, I.; Varickis, S.; Vagele, A.

2018-03-01

The necessity for considering both strength criteria and postbuckling effects in calculating the load-carrying capacity in compression of thin-wall composite structures with impact damage is substantiated. An original applied method ensuring solution of these problems with an accuracy sufficient for practical design tasks is developed. The main advantage of the method is its applicability in terms of computing resources and the set of initial data required. The results of application of the method to solution of the problem of compression of fragments of thin-wall honeycomb panel damaged by impacts of various energies are presented. After a comparison of calculation results with experimental data, a working algorithm for calculating the reduction in the load-carrying capacity of a composite object with impact damage is adopted.

Screening for EIA in India: enhancing effectiveness through ecological carrying capacity approach.

Science.gov (United States)

Rajaram, T; Das, Ashutosh

2011-01-01

Developing countries across the world have embraced the policy of high economic growth as a means to reduce poverty. This economic growth largely based on industrial output is fast degrading the ecosystems, jeopardizing their long term sustainability. Environmental Impact Assessment (EIA) has long been recognized as a tool which can help in protecting the ecosystems and aid sustainable development. The Screening guidelines for EIA reflect the level of commitment the nation displays towards tightening its environmental protection system. The paper analyses the screening process for EIA in India and dissects the rationale behind the exclusions and thresholds set in the screening process. The screening process in India is compared with that of the European Union with the aim of understanding the extent of deviations from a screening approach in the context of better economic development. It is found that the Indian system excludes many activities from the purview of screening itself when compared to the EU. The constraints responsible for these exclusions are discussed and the shortcomings of the current command and control system of environmental management in India are also explained. It is suggested that an ecosystem carrying capacity based management system can provide significant inputs to enhance the effectiveness of EIA process from screening to monitoring. Copyright © 2010 Elsevier Ltd. All rights reserved.

System dynamics model of Suzhou water resources carrying capacity and its application

Directory of Open Access Journals (Sweden)

Li Cheng

2010-06-01

Full Text Available A model of Suzhou water resources carrying capacity (WRCC was set up using the method of system dynamics (SD. In the model, three different water resources utilization programs were adopted: (1 continuity of existing water utilization, (2 water conservation/saving, and (3 water exploitation. The dynamic variation of the Suzhou WRCC was simulated with the supply-decided principle for the time period of 2001 to 2030, and the results were characterized based on socio-economic factors. The corresponding Suzhou WRCC values for several target years were calculated by the model. Based on these results, proper ways to improve the Suzhou WRCC are proposed. The model also produced an optimized plan, which can provide a scientific basis for the sustainable utilization of Suzhou water resources and for the coordinated development of the society, economy, and water resources.

A method for prediction of extent of microbial pollution of seawater and carrying capacity of beaches

Science.gov (United States)

Kocasoy, Günay

1989-07-01

The increase in the number of tourists visiting a coast is desired by most of the countries for economic reasons. However, this increase in tourism may cause pollution of the sea. This can be only avoided by proper planning and by predicting the “carrying capacity” of the coast in terms of sea pollution. This is especially important for developing countries where part of the wastewater is discharged without any treatment into the sea. In the present study the beaches were classified according to their use — and consequently the amount of waste discharged into the sea — into four groups: (1) coasts that are used only for swimming and recreational purposes; (2) coasts used simultaneously for dwelling, swimming, and recreational purposes; (3) coasts along which only dwellings exist; and (4) natural and man-made harbors, i.e., coasts used as shelters. During the survey,40,320 observations were made between December 1985 and February 1988 to determine the effect of the number of tourists on seawater quality. The results obtained were analyzed by a multilinear regression program to obtain an empirical equation giving the extent of the sea pollution in terms of coliform concentration as a function of population density and some other environmental factors. The equations derived in this study enable the determination of the carrying capacity of a beach in terms of pollution as well as the expected degree of pollution corresponding to a given population density. Furthermore, it allows the prediction of the extra carrying capacity that can be obtained by improving the waste-disposal conditions.

Study plan for evaluating carrying capacity: Measure 7.1A of the Northwest Power Planning Council's 1994 Fish and Wildlife Program. Report 2 of 4, Final report

International Nuclear Information System (INIS)

Neitzel, D.A.; Johnson, G.E.

1996-05-01

This report is one report of four that the Pacific Northwest National Laboratory (PNNL) staff used to address Measure 7.1A in the Northwest Power Planning Council's (Council) fish and Wildlife Program (Program) dated December 1994 (NPPC 1994). Measure 7.1A calls for the Bonneville Power Administration (BPA) to fund an evaluation of salmon survival, ecology, carrying capacity, and limiting factors in freshwater, estuarine, and marine habitats. Additionally, the Measure asks for the development of a study plan based on the critical uncertainties and research needs identified during the evaluation. In the evaluation of carrying capacity the authors concluded that defining capacity and listing the determinants of capacity is not a simple exercise. Capacity is a complex variable among the attributes that all together define salmon performance. To pursue the capacity parameter, that is, a single number or set of numbers that quantify how many salmon the basin or any part of the basin can support, will not lead to the development of a useful study plan. To increase understanding of ecology, carrying capacity, and limiting factors, it is necessary to deal with the complexity of the sustained performance of salmon in the Columbia River Basin. This report describes the elements of a study plan that could be used to increase the understanding of ecology, carrying capacity, and limiting factors that influence salmon survival under current conditions

Evaluation of Carrying Capacity : Measure 7.1A of the Northwest Power Planning Council`s 1994 Fish and Wildlife Program : Report 1 of 4, Final Report.

Energy Technology Data Exchange (ETDEWEB)

Neitzel, Duane A.; Johnson, Gary E.

1996-05-01

This report is one of four that the Pacific Northwest National Laboratory (PNNL) staff prepared to address Measure 7.1A in the Northwest Power Planning Council's (Council) Fish and Wildlife Program (Program) dated december 1994 (NPPC 1994). Measure 7.1A calls for the Bonneville Power Administration (BPA) to fund an evaluation of salmon survival, ecology, carrying capacity, and limiting factors in freshwater, estuarine, and marine habitats. Additionally, the Measure asks for development of a study plan based on critical uncertainties and research needs identified during the evaluation. This report deals with the evaluation of carrying capacity. It describes the analysis of different views of capacity as it relates to salmon survival and abundance. The report ends with conclusions and recommendations for studying carrying capacity.

Methodology for calculating the tourist carrying capacity as a tool for environmental management and its implementation in five northern Colombian Caribbean beaches

International Nuclear Information System (INIS)

Botero, Camilo; Yuri, Hurtado; Gonzalez, Jose

2008-01-01

This paper presents a new methodology to calculate carrying capacity in tourist beaches, further than merely environmental issues. Moreover, it understands beaches as complex systems towards its sustainable development. Five beaches in the North Caribbean coast of Colombia were chosen and classified in four tourism beach sorts: intensive, conservation, shared and ethnic. The analysis was done with legal framework review, fieldwork and indicators design, within three components: environmental support, urban infrastructure and tourist services. A new model to calculate carrying capacity in tourist beaches was created, and later applied on the study beaches. Current conditions of the five beaches were highlighted, their tourist carrying capacity were calculated and more important actions in each component were recommended. The main conclusion foster to take in consideration natural conditions as a core factor in beach management, but including a holistic approach in making decision process. Also this paper showed the current conditions of Colombian beaches as a warning, giving recommendations in short and medium term. This document is result of the project Determinacion de un sistema de calificacion y certificacion de playas turisticas.

Effects of high fluoride intake on child mental work capacity: preliminary investigation into the mechanisms involved

Energy Technology Data Exchange (ETDEWEB)

Li, Y.; Li, X.J.; Wei, S.Q. [Child & Adolescent Hygiene Teaching Research Station, Chengdu (China)

2008-10-15

A study was carried out on 157 children, age 12-13, from a coal-burning fluorosis endemic area together with an experiment looking into the effect of high fluoride intake in animals. The results showed that early, prolonged high fluoride intake causes a decrease in a child's mental work capacity and that prolonged high uptake of fluoride causes a child's levels of hair zinc to drop. A multifactoral correlative analysis demonstrated a direct correlation between hair zinc and mental work capacity. The decrease of 5-hydroxyindoleacetic acid and the increase of norepinephrine in animal brains exposed to high levels of fluoride suggest a possible mechanism for mental work capacity deficits in children. However, further research is necessary.

Student Responses to a Hands-On Kinesthetic Lecture Activity for Learning about the Oxygen Carrying Capacity of Blood

Science.gov (United States)

Breckler, Jennifer; Yu, Justin R.

2011-01-01

This article describes a new hands-on, or "kinesthetic," activity for use in a physiology lecture hall to help students comprehend an important concept in cardiopulmonary physiology known as oxygen carrying capacity. One impetus for designing this activity was to address the needs of students who have a preference for kinesthetic…

A review and synthesis of recreation ecology research supporting carrying capacity and visitor use management decisionmaking

Science.gov (United States)

Marion, Jeff

2016-01-01

Resource and experiential impacts associated with visitation to wilderness and other similar backcountry settings have long been addressed by land managers under the context of “carrying capacity” decisionmaking. Determining a maximum level of allowable use, below which high-quality resource and experiential conditions would be sustained, was an early focus in the 1960s and 1970s. However, decades of recreation ecology research have shown that the severity and areal extent of visitor impact problems are influenced by an interrelated array of use-related, environmental, and managerial factors. This complexity, with similar findings from social science research, prompted scientists and managers to develop more comprehensive carrying capacity frameworks, including a new Visitor Use Management framework. These frameworks rely on a diverse array of management strategies and actions, often termed a “management toolbox,” for resolving visitor impact problems. This article reviews the most recent and relevant recreation ecology studies that have been applied in wildland settings to avoid or minimize resource impacts. The key findings and their management implications are highlighted to support the professional management of common trail, recreation site, and wildlife impact problems. These studies illustrate the need to select from a more diverse array of impact management strategies and actions based on an evaluation of problems to identify the most influential factors that can be manipulated.

Influence of the volume ratio of solid phase on carrying capacity of regular porous structure

Directory of Open Access Journals (Sweden)

Monkova Katarina

2017-01-01

Full Text Available Direct metal laser sintering is spread technology today. The main advantage of this method is the ability to produce parts which have a very complex geometry and which can be produced only in very complicated way by classical conventional methods. Special category of such components are parts with porous structure, which can give to the product extraordinary combination of properties. The article deals with some aspects that influence the manufacturing of regular porous structures in spite of the fact that input technological parameters at various samples were the same. The main goal of presented research has been to investigate the influence of the volume ratio of solid phase on carrying capacity of regular porous structure. Realized tests have indicated that the unit of regular porous structure with lower volume ratio is able to carry a greater load to failure than the unit with higher volume ratio.

Current-carrying capacity dependence of composite Bi2Sr2CaCu2O8 superconductors on the liquid coolant conditions

International Nuclear Information System (INIS)

Romanovskii, V R; Watanabe, K; Awaji, S; Nishijima, G

2006-01-01

The thermal runaway conditions of the composite Bi 2 Sr 2 CaCu 2 O 8 superconductor cooled by liquid helium or liquid hydrogen are compared. The study based on the static analysis of thermoelectric modes was made when the volume fraction of the superconductor in a composite was varied. Some specific trends underlying the onset of thermal runaway in superconducting composites cooled by liquid coolants are discussed. It is stated that the operating modes of superconducting composites may be characterized by stable states during which the current-carrying capacity of a superconductor is not effectively used even with a high amount of superconductor in the composite. These states are possible due to the corresponding temperature variation of the resistivities of the matrix and the superconductor in the high operating temperature range. They have to be considered in experiments when the critical current of a superconductor is determined or when the optimal stable operating modes of the current-carrying elements based on the Bi 2 Sr 2 CaCu 2 O 8 superconductor, which is cooled by liquid coolant, are defined

Meta-analysis of carrying capacity and abundance-area relationships in marine fish species

DEFF Research Database (Denmark)

Mantzouni, Irene

investigated also across the north Atlantic distribution of haddock. The major motivations were first, to provide an evaluation of potential thermal effects on haddock recruitment productivity across its distribution, since the species is relatively less investigated on this regard compared to cod. In addition......Knowledge on the carrying capacity and the abundance-area relationships of fish is critical to evaluate the impacts of exploitation and climate on the sustainability and also the recovery potential of the populations. Of particular interest is climate change, inducing major consequences...... morhua), herring (Clupea harengus) and haddock (Melanogrammus aeglefinus), in order to identify the effects of temperature, habitat size and life-history on their productivity patterns. The first objective was to investigate how production and survival indices of cod recruitment (i.e. the number of new...

Meta-analysis of carrying capacity and abundance-area relationships in marine fish species

DEFF Research Database (Denmark)

Mantzouni, Irene

, to incorporate the influence of ecosystem factors, mainly temperature and habitat size, on model parameters representing cod maximum reproductive rate and carrying capacity. The pattern of temperature effects on cod productivity at the species level were identified and SR model parameters were estimated...... on the environmental impacts on key population parameters, which is required for an ecosystem approach to cod management, particularly under ocean-warming scenarios. The commonly used SR models, Ricker and Beverton-Holt, were extended by applying hierarchical methods, mixed-effects models and Bayesian inference...... morhua), herring (Clupea harengus) and haddock (Melanogrammus aeglefinus), in order to identify the effects of temperature, habitat size and life-history on their productivity patterns. The first objective was to investigate how production and survival indices of cod recruitment (i.e. the number of new...

Carrying capacity models should not use fixed prey density thresholds : a plea for using more tools of behavioural ecology

NARCIS (Netherlands)

van Gils, JA; Edelaar, P; Escudero, G; Piersma, T

Earlier studies have developed models of carrying capacity to predict the number of animals a certain area can support. These models assume that resources are not renewed after consumption ('standing stock' models), and that the initial number of prey and the rate of prey consumption determine the

CSTI High Capacity Power

International Nuclear Information System (INIS)

Winter, J.M.

1989-01-01

The SP-100 program was established in 1983 by DOD, DOE, and NASA as a joint program to develop the technology necessary for space nuclear power systems for military and civil application. During FY-86 and 87, the NASA SP-100 Advanced Technology Program was devised to maintain the momentum of promising technology advancement efforts started during Phase 1 of SP-100 and to strengthen, in key areas, the chances for successful development and growth capability of space nuclear reactor power systems for future space applications. In FY-88, the Advanced Technology Program was incorporated into NASA's new Civil Space Technology Initiative (CSTI). The CSTI Program was established to provide the foundation for technology development in automation and robotics, information, propulsion, and power. The CSTI High Capacity Power Program builds on the technology efforts of the SP-100 program, incorporates the previous NASA SP-100 Advanced Technology project, and provides a bridge to NASA Project Pathfinder. The elements of CSTI High Capacity Power development include Conversion Systems, Thermal Management, Power Management, System Diagnostics, and Environmental Interactions. Technology advancement in all areas, including materials, is required to assure the high reliability and 7 to 10 year lifetime demanded for future space nuclear power systems. The overall program will develop and demonstrate the technology base required to provide a wide range of modular power systems as well as allowing mission independence from solar and orbital attitude requirements. Several recent advancements in CSTI High Capacity power development will be discussed

Conditions for the management of carrying capacity in the parks of Parks&Benefits

DEFF Research Database (Denmark)

Brandt, Jesper; Holmes, Esbern

2011-01-01

Growth in the number of visitors is an upcoming problem in nature parks. Nature parks are at the same time facing increasing demand, falling public appropriations and receding focus on their conservation functions. To ensure a balancing of nature protection and economic utilization the concept...... stakeholders, balancing use and protection preferably based on scientific and/or experiential cognition. The conditions for the management of carrying capacity for the 8 nature parks in the EC Baltic Project Parks&Benefits are analysed in the report. 1. Part focus on the methodology, concentrated...... on the comparison of the common conditions related to the international nature protection obligations in the parks, primarily expressed through the management under the EU Natura2000-program. In part 2, a comparison of the 8 parks concerning extent, land use composition, population in and around the park...

Calculation and evaluation of the tourism environmental carrying capacity of Xi'an%西安市旅游环境承载力测算与评价研究

Institute of Scientific and Technical Information of China (English)

闫博雅; 毕超

2011-01-01

Aim To calculate and evaluate the tourism environmental carrying capacity of Xi'an. Methods The Calculation model of the tourism environmental carrying capacity is used. Results The tourism environmental carrying capacity of Xi'an is 282 600 passengers per day and the lower ecological carrying capacity is the primary factor that constrained tourism environmental carrying capacity in Xi'an. Conclusion Urban tourism environmental carrying capacity is about twice of the number of tourists in Xi'an in 2010, it can be improved by enhancing the city's capacity in terms of solid waste and wastewater treatment in the future.%目的 测算西安市旅游环境承栽力并对测算结果进行评价.方法 运用旅游管理学中的旅游环境承栽力测算模型进行测算.结果 计算出西安市旅游环境承载力为每日28.26万人次,并且发现生态承栽力较低是制约其旅游环境承载力的首要因素.结论 西安市旅游环境承载力约是2010年西安市日均游客接待数量的2倍,可通过改善影响旅游生态承载力的固体废弃物、废水处理能力,大幅提升西安市旅游环境承栽力.

Capacity Bounds and High-SNR Capacity of MIMO Intensity-Modulation Optical Channels

KAUST Repository

Chaaban, Anas

2018-02-19

The capacity of the intensity modulation direct detection multiple-input multiple-output channel is studied. Therein, the nonnegativity constraint of the transmit signal limits the applicability of classical schemes, including precoding. Thus, new ways are required for deriving capacity bounds for this channel. To this end, capacity lower bounds are developed in this paper by deriving the achievable rates of two precodingfree schemes: Channel inversion and QR decomposition. The achievable rate of a DC-offset SVD-based scheme is also derived as a benchmark. Then, capacity upper bounds are derived and compared against the lower bounds. As a result, the capacity at high signal-to-noise ratio (SNR) is characterized for the case where the number of transmit apertures is not larger than the number of receive apertures, and is shown to be achievable by the QR decomposition scheme. This is shown for a channel with average intensity or peak intensity constraints. Under both constraints, the high-SNR capacity is approximated within a small gap. Extensions to a channel with more transmit apertures than receive apertures are discussed, and capacity bounds for this case are derived.

Capacity Bounds and High-SNR Capacity of MIMO Intensity-Modulation Optical Channels

KAUST Repository

Chaaban, Anas; Rezki, Zouheir; Alouini, Mohamed-Slim

2018-01-01

The capacity of the intensity modulation direct detection multiple-input multiple-output channel is studied. Therein, the nonnegativity constraint of the transmit signal limits the applicability of classical schemes, including precoding. Thus, new ways are required for deriving capacity bounds for this channel. To this end, capacity lower bounds are developed in this paper by deriving the achievable rates of two precodingfree schemes: Channel inversion and QR decomposition. The achievable rate of a DC-offset SVD-based scheme is also derived as a benchmark. Then, capacity upper bounds are derived and compared against the lower bounds. As a result, the capacity at high signal-to-noise ratio (SNR) is characterized for the case where the number of transmit apertures is not larger than the number of receive apertures, and is shown to be achievable by the QR decomposition scheme. This is shown for a channel with average intensity or peak intensity constraints. Under both constraints, the high-SNR capacity is approximated within a small gap. Extensions to a channel with more transmit apertures than receive apertures are discussed, and capacity bounds for this case are derived.

High Capacity cylinder roller bearing; High Capacity Zylinderrollenlager. Ein vollrolliges Lager mit Kaefig

Energy Technology Data Exchange (ETDEWEB)

Reichert, J.; Baum, J. [SKF, Schweinfurt (Germany)

2007-07-15

The high capacity cylinder roller bearing is an example for continuous development of SKF products and does an effective contribution to increase operational safety and offers the possibility to reduce weight and compact design. (GL)

Impact of Flexibility Options on Grid Economic Carrying Capacity of Solar and Wind: Three Case Studies

Energy Technology Data Exchange (ETDEWEB)

Denholm, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States); Novacheck, Joshua [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jorgenson, Jennie [National Renewable Energy Lab. (NREL), Golden, CO (United States); O' Connell, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-12-01

In this study, we attempt to quantify the benefits of various options of grid flexibility by measuring their impact on two measures: economic carrying capacity and system costs. Flexibility can increase ECC and reduce overall system costs. In some cases, options that provide a limited increase in ECC can provide significant operational savings, thus demonstrating the need to evaluate flexibility options using multiple metrics. The value of flexibility options varies regionally due to different generation mixes and types of renewables. The more rapid decline in PV value compared to wind makes PV more dependent on adding flexibility options, including transmission and energy storage.

Evaluation of the Township Proper Carrying Capacity over Qinghai-Tibet plateau by CASA model

Science.gov (United States)

Wu, Chengyong; Cao, Guangchao; Xue, Huaju; Jiang, Gang; Wang, Qi; Yuan, Jie; Chen, Kelong

2018-01-01

The existing study of proper carrying capacity (PCC) has mostly focused on province or county administrative units, which can only macroscopically master the quantitative characteristics of PCC, but could not effectively take some animal husbandry management measures that are pertinent and operational. At town-scale, this paper used CASA model to estimate the PCC in Mongolian Autonomous County of Henan, Qinghai province, China,with serious grassland degeneration that mainly caused by overgrazing. The results showed that the PCC throughout the County was 950,417 sheep unit. For the township, the PCC of Saierlong and Duosong were the largest (247,100 sheep unit) and the smallest (82,016 sheep unit) respectively. This study will provide reference data for developing sustainable development of town-scale pasture policies and also will help to evaluate the health status of the alpine grassland ecosystem on Qinghai-Tibet plateau.

Influence of time-dependent elastic-plastic material behaviour on the load-carrying capacity of shells of revolution

International Nuclear Information System (INIS)

Schnabel, F.

1987-01-01

The present report deals with the influence of time-dependent material behavior on the load-carrying capacity of thin-walled shells of revolution. In the first part various creep-hardening hypotheses as well as the spatial and temporal discretization procedures employed are described. The adaptation of a well-tested finite element method based on ring elements to the treatment of creep problems and several time-integration procedures, in particular the iterative treatment of the coupling between creep and elastic-plastic strains as well as the important aspect of time-step-control are discussed in detail. In the second part several typical shell configurations are analyzed and a comparison with available theoretical and experimental results is made. Finally, the time-dependent load-carrying behavior of torispherical pressure vessel ends subjected to internal and external pressure is investigated and design aids for the determination of creep collapse times are proposed. (orig.) [de

Grid Integration and the Carrying Capacity of the U.S. Grid to Incorporate Variable Renewable Energy

Energy Technology Data Exchange (ETDEWEB)

Cochran, Jaquelin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Denholm, Paul [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Speer, Bethany [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Miller, Mackay [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2015-04-23

In the United States and elsewhere, renewable energy (RE) generation supplies an increasingly large percentage of annual demand, including nine U.S. states where wind comprised over 10% of in-state generation in 2013. This white paper summarizes the challenges to integrating increasing amounts of variable RE, identifies emerging practices in power system planning and operation that can facilitate grid integration, and proposes a unifying concept—economic carrying capacity—that can provide a framework for evaluating actions to accommodate higher penetrations of RE. There is growing recognition that while technical challenges to variable RE integration are real, they can generally be addressed via a variety of solutions that vary in implementation cost. As a result, limits to RE penetration are primarily economic, driven by factors that include transmission and the flexibility of the power grid to balance supply and demand. This limit can be expressed as economic carrying capacity, or the point at which variable RE is no longer economically competitive or desirable to the system or society.

环境承载力视角的浙江东极岛旅游发展研究%Study on the Tourism Development of Zhejiang Dongji Island from the Perspective of Environmental Carrying Capacity

Institute of Scientific and Technical Information of China (English)

徐卫星; 姜和忠; 潘惠红

2018-01-01

Based on the evaluation theory of resource carrying capacity,the carrying capacity of tourism resources was evaluated and analyzed from 4 aspects:the carrying capacity of space resources,the carrying capacity of natural environment,the economic carrying capacity and the social psychological bearing capacity.Based on above conclusions,Dongji Island tourism development suggestions were put forward,including the improvement of hardware construction,improving the carrying capacity of infrastructure;riching tourism projects,improving the bearing capacity of space resources;strengthening the off-season tourism development,improving the utilization intensity of tourism resources.%基于资源承载力评价理论,从空间资源承载力、自然环境承载力、经济承载力以及社会心理承载力4个方面对东极岛旅游资源承载力进行评价与分析,并基于以上分析结论提出东极岛旅游发展建议:完善硬件条件建设、提高基础设施承载力;丰富旅游项目,提高空间资源承载力;加强淡季旅游开发,提高旅游资源利用强度.

The Assessment of Carrying Capacity – A Crucial T ool for M anaging T ourism E ffects in T ourist D estinations

Directory of Open Access Journals (Sweden)

Dobrica Jovicic

2008-01-01

Full Text Available It is beyond doubt that the theory of tourism lags behind tourism practice. In order to decrease such a gap, theoretical work in tourism has been intensified over the last two decades. The key problems of research include: analysis, interpretation, and management of heterogeneous effects of tourism development, permeating different aspects of human life and work – from the global to the local level. This paper discusses the role, significance, and the ways of estimation and interpretation of the concept of carrying capacity within the conceptual framework of contemporary tourism. The paper also analyses various attitudes and conflicting opinions as to this, still much debated, concept. In the end, some crucial concluding remarks are presented that could alleviate the application of the concept of carrying capacity in practice, assuming its important role in planning tourist destination development and management of various tourism impacts.

High voltage and high specific capacity dual intercalating electrode Li-ion batteries

Science.gov (United States)

West, William C. (Inventor); Blanco, Mario (Inventor)

2010-01-01

The present invention provides high capacity and high voltage Li-ion batteries that have a carbonaceous cathode and a nonaqueous electrolyte solution comprising LiF salt and an anion receptor that binds the fluoride ion. The batteries can comprise dual intercalating electrode Li ion batteries. Methods of the present invention use a cathode and electrode pair, wherein each of the electrodes reversibly intercalate ions provided by a LiF salt to make a high voltage and high specific capacity dual intercalating electrode Li-ion battery. The present methods and systems provide high-capacity batteries particularly useful in powering devices where minimizing battery mass is important.

Giant panda (Ailuropoda melanoleuca) population dynamics and bamboo (subfamily Bambusoideae) life history: a structured population approach to examining carrying capacity when the prey are semelparous

Science.gov (United States)

Carter, J.; Ackleh, A.S.; Leonard, B.P.; Wang, Hongfang

1999-01-01

The giant panda, Ailuropoda melanoleuca, is a highly specialized Ursid whose diet consists almost entirely of various species of bamboo. Bamboo (Bambusoideae) is a grass subfamily whose species often exhibit a synchronous semelparity. Synchronous semelparity can create local drops in carrying capacity for the panda. We modeled the interaction of pandas and their bamboo food resources with an age structured panda population model linked to a natural history model of bamboo biomass dynamics based on literature values of bamboo biomass, and giant panda life history dynamics. This paper reports the results of our examination of the interaction between pandas and their bamboo food resource and its implications for panda conservation. In the model all panda populations were well below the carrying capacity of the habitat. The giant panda populations growth was most sensitive to changes in birth rates and removal of reproductive aged individuals. Periodic starvation that has been documented in conjunction with bamboo die-offs is probably related to the inability to move to other areas within the region where bamboo is still available. Based on the results of this model, giant panda conservation should concentrate on keeping breeding individuals in the wild, keep corridors to different bamboo species open to pandas, and to concentrate research on bamboo life history.

High capacity getter pump for UHV operation

International Nuclear Information System (INIS)

Manini, P.; Marino, M.; Belloni, F.; Porro, M.

1993-01-01

UHV pumps based on non-evaporable getter coated strips find widespread use in particle accelerators, synchrotron radiation machines and nuclear fusion experimental devices. Depending on the geometric constraints, pressure operation conditions and the foreseen gas loads, optimized getter structures, such as modules and cartridges, can be designed and assembled into a high-efficiency pump. In the present paper, the design and performance of a newly conceived High Capacity Getter Pump (HCGP) based on sintered getter bodies, in the shape of blades instead of strips, is illustrated. The porosity and the specific surface area of the blades and their arrangement in the cartridge have been optimized to significantly increase sorption capacity at a given speed. These pumps are well suited for those applications where a very high gas load is expected during the machine operation. The sintered getter bodies increase surface area and capacity, requiring less frequent reactivation and facilitating greater overall life of the pump. A discussion of the experimental results in terms of sorption speed and capacity for various gases is presented

我国东部沿海地区旅游环境相对承载力研究%THE STUDY ON THE RELATIVE CARRYING CAPACITY OF TOURISM ENVIRONMENT IN EASTERN COASTAL REGIONS IN CHINA

Institute of Scientific and Technical Information of China (English)

张广海; 刘佳

2009-01-01

Through evaluating on tourism environmental carrying capacity including the relative carrying capacity of tourism resources and the relative carrying capacity of tourism economy, in order to making disscussion on the sustainable development among tourism resources and tourist capacity and tourism economy, which providing a new study idea and study method for tourism environmental carrying capacity.Compared to nationwide, the whole the relative carrying capacity of tourism resources and tourism economy are extremly strong, it is in under the carrying capacitiy of tourism environment and carrying capacity potental is lalent, however, the relative carrying capacities of tourism environment in different provinces are different, regional disparities are so obvious. Therefore, the Coordinated and orderd development of tourism industry should be strengthened,in order to putting comprehensive development level of tourism industry and the whole carrying capacity of tourism envinronment.%选取旅游资源综合丰度和旅游经济指标,对旅游环境系统的承载状况和承载潜力进行定量测算,以探讨区域旅游资源开发与旅游经济发展水平之间的相互关系.研究表明,相对于全国而言,东部沿海地区整体旅游资源环境相对承载能力和旅游经济环境相对承载能力较强,处于弱载状态,具有一定的承载潜力,其中旅游环境相对承载力具有明显的地域差异,应加强各省市旅游业的协调有序发展,以提高东部沿海旅游环境整体承载力,进一步推动沿海发达地区旅游业的综合发展.

Model for determining the load or carrying capacity of rivers and riverbanks for recreational use

Directory of Open Access Journals (Sweden)

Otero, I.

2015-12-01

Full Text Available The aim of this article is to determine the load or functional carrying capacity for the assimilation and recovery of rivers and riverbanks by compiling information on the environment, and to assess the potential for recreation from the environmental and scenic point of view. We set out to find the most significant basis for analysing the pressures limiting carrying capacity and constraining the demand for recreational use. This methodology will help planners and legislators in their decision-making. We also propose a methodology for assessing the recreational use of riverbanks, tested in a number of sites in the Madrid Region, in terms of the satisfaction the activity produces in the users, and the load or carrying capacity of the surrounding environment. A pilot site assessment is presented as a validation of the proposed methodology.El objetivo de este artículo es, determinar la capacidad de carga o acogida funcional, de asimilación y de recuperación de los márgenes y los cursos fluviales mediante la recopilación de información del medio; el potencial recreativo se evalúa además desde un doble punto de vista: ecológico y paisajístico. La forma en que se enfoca el problema y se presenta la metodología y los resultados puede resultar de gran utilidad para planificadores y legisladores. La metodología propuesta para valorar el uso recreativo de los márgenes fluviales, se aplica a una serie de parcelas en la Comunidad de Madrid, teniendo en cuenta la satisfacción que la actividad produce en los usuarios, y la capacidad de carga o acogida del entorno en el que se desarrollan. Como resultado, se presenta la valoración de parcelas piloto, que servirían para validar la metodología propuesta. [fr] Le but de cet article est, déterminer la capacité de charge ou réception fonctionnelle, l’assimilation et rétablissement des marges et les cours de la rivière par le biais de la collecte d’informations de l’environnement: le

Load carrying capacity of RCC beams by replacing steel reinforcement bars with shape memory alloy bars

Science.gov (United States)

Bajoria, Kamal M.; Kaduskar, Shreya S.

2016-04-01

In this paper the structural behavior of reinforced concrete (RC) beams with smart rebars under two point loading system has been numerically studied, using Finite Element Method. The material used in this study is Super-elastic Shape Memory Alloys (SE SMAs) which contains nickel and titanium. In this study, different quantities of steel and SMA rebars have been used for reinforcement and the behavior of these models under two point bending loading system is studied. A comparison of load carrying capacity for the model between steel reinforced concrete beam and the beam reinforced with S.M.A and steel are performed. The results show that RC beams reinforced with combination of shape memory alloy and steel show better performance.

The development and application of high-capacity thickening techniques

International Nuclear Information System (INIS)

Ji Zhenwan; Song Yuejie

1995-01-01

On the basis of sedimentation theory and comparison between the high-capacity and conventional thickening techniques, the authors analyse the ways to increase capacity and to improve technological parameters of thickeners, describes the construction features, development, application, automatic control and test installations of high-capacity thickeners at home and abroad

High-capacity nanocarbon anodes for lithium-ion batteries

International Nuclear Information System (INIS)

Zhang, Haitao; Sun, Xianzhong; Zhang, Xiong; Lin, He; Wang, Kai; Ma, Yanwei

2015-01-01

Highlights: • The nanocarbon anodes in lithium-ion batteries deliver a high capacity of ∼1100 mA h g −1 . • The nanocarbon anodes exhibit excellent cyclic stability. • A novel structure of carbon materials, hollow carbon nanoboxes, has potential application in lithium-ion batteries. - Abstract: High energy and power density of secondary cells like lithium-ion batteries become much more important in today’s society. However, lithium-ion battery anodes based on graphite material have theoretical capacity of 372 mA h g −1 and low charging-discharging rate. Here, we report that nanocarbons including mesoporous graphene (MPG), carbon tubular nanostructures (CTN), and hollow carbon nanoboxes (HCB) are good candidate for lithium-ion battery anodes. The nanocarbon anodes have high capacity of ∼1100, ∼600, and ∼500 mA h g −1 at 0.1 A g −1 for MPG, CTN, and HCB, respectively. The capacity of 181, 141, and 139 mA h g −1 at 4 A g −1 for MPG, CTN, and HCB anodes is retained. Besides, nanocarbon anodes show high cycling stability during 1000 cycles, indicating formation of a passivating layer—solid electrolyte interphase, which support long-term cycling. Nanocarbons, constructed with graphene layers which fulfill lithiation/delithiation process, high ratio of graphite edge structure, and high surface area which facilitates capacitive behavior, deliver high capacity and improved rate-capability

Battery designs with high capacity anode materials and cathode materials

Energy Technology Data Exchange (ETDEWEB)

Masarapu, Charan; Anguchamy, Yogesh Kumar; Han, Yongbong; Deng, Haixia; Kumar, Sujeet; Lopez, Herman A.

2017-10-03

Improved high energy capacity designs for lithium ion batteries are described that take advantage of the properties of high specific capacity anode active compositions and high specific capacity cathode active compositions. In particular, specific electrode designs provide for achieving very high energy densities. Furthermore, the complex behavior of the active materials is used advantageously in a radical electrode balancing design that significantly reduced wasted electrode capacity in either electrode when cycling under realistic conditions of moderate to high discharge rates and/or over a reduced depth of discharge.

Research and application advances in ecological carrying capacity%生态承载力研究和应用进展

Institute of Scientific and Technical Information of China (English)

向芸芸; 蒙吉军

2012-01-01

The study of ecological carrying capacity is an important basis for the settlement of resource shortage and environment deterioration and the realization of regional sustainable development, and also, one of the hot spots in geography, ecology, and economics. After reviewing the related research achievements, this paper elucidated the connotation of ecological carrying capacity , i. e. , a representation of the supporting function and compressive stress of complex ecosystem , introduced the universal measuring methods of ecological carrying capacity, e. g. , net primary productivity (NPP) , ecological footprint (EF) , balance of supply and demand, evaluation with comprehensive indices, and systematic modeling, and presented the research progress in the ecological carrying capacity of the regions being more concerned, including watersheds, ecological fragile areas, cities, agricultural areas, and tourism areas. The deficiencies in current studies, such as the shortage of complete scientific research system, the ambiguity of threshold value's ecological meaning, the lack of time series study, and the absence of spatial pattern analysis, were summarized, and accordingly, the development trends in action mechanisms, model construction, and practical application were prospected.%生态承载力研究是解决资源-环境矛盾、实现区域可持续发展的重要基础,也是地理学、生态学和经济学关注的热点与前沿领域.本文在综述国内外相关研究成果的基础上,阐述了生态承载力的概念内涵,即对复合生态系统支持力和压力的表征；评述了常用的研究方法,即净初级生产力估测法、生态足迹法、供需平衡法、综合指标评价法和系统模型法；介绍了目前较为关注的流域、生�

High-Capacity Cathode Material with High Voltage for Li-Ion Batteries.

Science.gov (United States)

Shi, Ji-Lei; Xiao, Dong-Dong; Ge, Mingyuan; Yu, Xiqian; Chu, Yong; Huang, Xiaojing; Zhang, Xu-Dong; Yin, Ya-Xia; Yang, Xiao-Qing; Guo, Yu-Guo; Gu, Lin; Wan, Li-Jun

2018-03-01

Electrochemical energy storage devices with a high energy density are an important technology in modern society, especially for electric vehicles. The most effective approach to improve the energy density of batteries is to search for high-capacity electrode materials. According to the concept of energy quality, a high-voltage battery delivers a highly useful energy, thus providing a new insight to improve energy density. Based on this concept, a novel and successful strategy to increase the energy density and energy quality by increasing the discharge voltage of cathode materials and preserving high capacity is proposed. The proposal is realized in high-capacity Li-rich cathode materials. The average discharge voltage is increased from 3.5 to 3.8 V by increasing the nickel content and applying a simple after-treatment, and the specific energy is improved from 912 to 1033 Wh kg -1 . The current work provides an insightful universal principle for developing, designing, and screening electrode materials for high energy density and energy quality. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

High capacity photonic integrated switching circuits

NARCIS (Netherlands)

Albores Mejia, A.

2011-01-01

As the demand for high-capacity data transfer keeps increasing in high performance computing and in a broader range of system area networking environments; reconfiguring the strained networks at ever faster speeds with larger volumes of traffic has become a huge challenge. Formidable bottlenecks

High visual working memory capacity in trait social anxiety.

Science.gov (United States)

Moriya, Jun; Sugiura, Yoshinori

2012-01-01

Working memory capacity is one of the most important cognitive functions influencing individual traits, such as attentional control, fluid intelligence, and also psychopathological traits. Previous research suggests that anxiety is associated with impaired cognitive function, and studies have shown low verbal working memory capacity in individuals with high trait anxiety. However, the relationship between trait anxiety and visual working memory capacity is still unclear. Considering that people allocate visual attention more widely to detect danger under threat, visual working memory capacity might be higher in anxious people. In the present study, we show that visual working memory capacity increases as trait social anxiety increases by using a change detection task. When the demand to inhibit distractors increased, however, high visual working memory capacity diminished in individuals with social anxiety, and instead, impaired filtering of distractors was predicted by trait social anxiety. State anxiety was not correlated with visual working memory capacity. These results indicate that socially anxious people could potentially hold a large amount of information in working memory. However, because of an impaired cognitive function, they could not inhibit goal-irrelevant distractors and their performance decreased under highly demanding conditions.

Study on quantitative evaluation of environmental carrying capacity of eco-tourism%生态旅游环境承载力评价研究

Institute of Scientific and Technical Information of China (English)

孙金梅; 林建

2012-01-01

近年来生态旅游迅猛发展，成为国内外旅游的热点，但生态旅游环境压力加大，如何评价环境压力就成了不容忽视的问题。在系统分析法基础上，提出生态旅游环境承载力概念，建立一套包括经济和社会承载力等5个子系统的科学生态旅游环境承载力指标体系及评价模型，并以武夷山自然保护区为例进行实证研究，研究结果表明其环境承载力远远超过实际游客数量，需要采取加强生态监测和科学功能分区等措施。%In recent years,ecological tourism becomes the domestic and foreign tourist hot spot,but the pressure of ecological tourism environment is increased. How to evaluate the environmental stress becomes a problem that cannot ignored. Combined with the former research,based on the system analysis method, the concepts of the ecological carrying capacity of tourism environment is proposed,a set of scientific ecological carrying capacity of tourism environment index system and evaluation model are established, including five sub-systems of economic and social capacity,and taking the nature protection area of Wuyishan as a case study, the results shows that the environmental carrying capacity force is far more than the actual number of tourists. It is needed to take the measures of strengthening the ecological monitoring and scientific zoning.

High capacity anode materials for lithium ion batteries

Science.gov (United States)

Lopez, Herman A.; Anguchamy, Yogesh Kumar; Deng, Haixia; Han, Yongbon; Masarapu, Charan; Venkatachalam, Subramanian; Kumar, Suject

2015-11-19

High capacity silicon based anode active materials are described for lithium ion batteries. These materials are shown to be effective in combination with high capacity lithium rich cathode active materials. Supplemental lithium is shown to improve the cycling performance and reduce irreversible capacity loss for at least certain silicon based active materials. In particular silicon based active materials can be formed in composites with electrically conductive coatings, such as pyrolytic carbon coatings or metal coatings, and composites can also be formed with other electrically conductive carbon components, such as carbon nanofibers and carbon nanoparticles. Additional alloys with silicon are explored.

Investigation on the fiber based approach to estimate the axial load carrying capacity of the circular concrete filled steel tube (CFST)

Science.gov (United States)

Piscesa, B.; Attard, M. M.; Suprobo, P.; Samani, A. K.

2017-11-01

External confining devices are often used to enhance the strength and ductility of reinforced concrete columns. Among the available external confining devices, steel tube is one of the most widely used in construction. However, steel tube has some drawbacks such as local buckling which needs to be considered when estimating the axial load carrying capacity of the concrete-filled-steel-tube (CFST) column. To tackle this problem in design, Eurocode 4 provided guidelines to estimate the effective yield strength of the steel tube material. To study the behavior of CFST column, in this paper, a non-linear analysis using a fiber-based approach was conducted. The use of the fiber-based approach allows the engineers to predict not only the axial load carrying capacity but also the complete load-deformation curve of the CFST columns for a known confining pressure. In the proposed fiber-based approach, an inverse analysis is used to estimate the constant confining pressure similar to design-oriented models. This paper also presents comparisons between the fiber-based approach model with the experimental results and the 3D non-linear finite element analysis.

Densities, viscosities, and isobaric heat capacities of the system (1-butanol + cyclohexane) at high pressures

International Nuclear Information System (INIS)

Torín-Ollarves, Geraldine A.; Martín, M. Carmen; Chamorro, César R.; Segovia, José J.

2014-01-01

Highlights: • The densities of cyclohexane and its mixtures with 1-butanol were measured. • The excess molar volumes were calculated and correlated. • The viscosities were measured at atmospheric pressure. • The isobaric heat capacities were measured at p = (0.1 to 25) MPa at T = (293.15 and 313.15) K. • A positive deviation from the ideal behavior is observed. - Abstract: The cyclohexane and the system of 1-butanol + cyclohexane have been characterized using densities, viscosities and isobaric heat capacities measurements. For that, the densities were measured in a high-pressure vibrating tube densimeter at five temperatures from (293.15 to 333.15) K and pressures up to 100 MPa. The measurements were correlated with the empirical Tamman–Tait equation. Moreover, the isobaric heat capacities of the binary system were measured in a high-pressure automated flow calorimeter at T = (293.15 and 313.15) K and pressures up to 25 MPa for pure cyclohexane and in admixture with 1-butanol. The excess molar heat capacities were assessed for the mixture and a positive deviation from the ideality was obtained, except for a small part in the region rich in alkanol. The viscosity measurements were carried out, at the calorimeter conditions, for correcting the experimental values of isobaric heat capacities due to friction along the tube. The viscosity was measured at atmospheric pressure in a Stabinger Anton Paar SVM 3000 viscometer in the temperature range of (293.15 to 333.15) K for cyclohexane and the mixtures. At high pressure, the viscosities were estimated using Lucas method

Potential for Grey wolf Canis lupus in the Netherlands : effects of habitat fragmentation and climate change on the carrying capacity and population dynamics

NARCIS (Netherlands)

Potiek, A.; Wamelink, G.W.W.; Jochem, R.; Langevelde, van F.

2012-01-01

Recolonization of the Netherlands by wolves is likely to occur within 5 to 10 years, and for management reasons the habitat suitability should be understood. Therefore, I predicted the carrying capacity and population dynamics of the wolf in the Netherlands, and studied the effects of habitat

Mechanics of high-capacity electrodes in lithium-ion batteries

International Nuclear Information System (INIS)

Zhu, Ting

2016-01-01

Rechargeable batteries, such as lithium-ion batteries, play an important role in the emerging sustainable energy landscape. Mechanical degradation and resulting capacity fade in high-capacity electrode materials critically hinder their use in high-performance lithium-ion batteries. This paper presents an overview of recent advances in understanding the electrochemically-induced mechanical behavior of the electrode materials in lithium-ion batteries. Particular emphasis is placed on stress generation and facture in high-capacity anode materials such as silicon. Finally, we identify several important unresolved issues for future research. (topical review)

Problem in application carrying capacity approach for land allocation assessment in Indonesian municipal spatial planning: A case of Kutai Kartanegara Regency

Science.gov (United States)

Wijaya, I. N. S.; Rahadi, B.; Lusiana, N.; Maulidina, I.

2017-06-01

Urbanization in many countries, such as Indonesia, is commonly appeared as a dynamic population of developed areas. It is followed with reducing rural uses of land for improving urban land uses such as housing, industry, infrastructure, etc. in response to the growth of population. One may not be sufficiently considered by the urban planners and the decision makers, urbanization also means escalation of natural resources consumption that should be supported by the natural capacity of the area. In this situation, balancing approach as carrying capacity calculation in spatial planning is needed for sustainability. Indonesian Spatial Planning Law 26/2007 has already expressed about the balance approach in the system. Moreover, it strictly regulates the assessment and the permission system in controlling land development, especially for the conversion. However, the reductions over the rural uses of land, especially agriculture, are continuously occurred. Concerning the planning approach, this paper aims to disclose common insufficiency of carrying capacity considerations in Indonesian spatial planning practice. This paper describes common calculation weaknesses in projecting area for the urban development by recalculating the actual gap between supply and demand of agriculture land areas. Here, municipal spatial plan of Kutai Kartanegara Regency is utilized as single sample case to discuss. As the result, the recalculation shows that: 1) there are serious deficit status of agriculture land areas in order to fulfil the demanded agriculture production for the existed population, 2) some calculation of agriculture production may be miss-interpreted because of insufficient explanation toward the productivity of each agriculture commodity.

A large capacity turbine generator for nuclear power generation

International Nuclear Information System (INIS)

Maeda, Susumu; Miki, Takahiro; Suzuki, Kazuichi

2000-01-01

In future large capacity nuclear power plant, capacity of a generator to be applied will be 1800 MVA of the largest class in the world. In response to this, the Mitsubishi Electric Co., Ltd. began to carry out element technology verification of a four-pole large capacity turbine generator mainly using upgrading technique of large capacity, since 1994 fiscal year. And, aiming at reliability verification of the 1800 MVA class generator, a model generator with same cross-section as that of an actual one was manufactured, to carry out some verifications on its electrified tests, and so on. Every performance evaluation result of tests on the model generator were good, and high reliability to design and manufacturing technique of the 1800 MVA class generator could be verified. In future, on the base of these technologies, further upgrading of reliability on the large capacity turbine generator for nuclear power generation is intended to be carried out. (G.K.)

High-capacity, high-strength trailer designs for the GA-4/GA-9 Casks

International Nuclear Information System (INIS)

Kissinger, J.A.; Rickard, N.D.; Taylor, C.; Zimmer, A.

1991-01-01

General Atomics (GA) is developing final designs for two dedicated legal-weight trailers to transport the GA-4 and GA-9 Spent-Fuel Casks. The basic designs for these high-capacity, high-strength trailers are essentially identical except for small modifications to account for the differences in cask geometry. We are designing both trailers to carry a 55,000 lb (24,900 kg) payload and to withstand a 2.5 g vertical design load. The GA-4 and GA-9 trailers are designed for significantly higher loads than are typical commercial semitrailers, which are designed to loads in the range of 1.7 to 2.0 g. To meet the federal gross vehicle weight limit for legal-weight trucks, GA has set a target design weight for the trailers of 9000 lb (4080 kg). This weight includes the personnel barrier, cask tiedowns, and impact limiter removal and storage system. Based on the preliminary trailer designs, the final design weight is expected to be very close to this target weight. 3 refs., 3 figs

High-capacity, high-strength trailer designs for the GA-4/GA-9 casks

International Nuclear Information System (INIS)

Rickard, N.D.; Kissinger, J.A.; Taylor, C.; Zimmer, A.

1991-01-01

General Atomics (GA) is developing final designs for two dedicated legal-weight trailers to transport the GA-4 and GA-9 Spent-Fuel Casks. The basic designs for these high-capacity, high-strength trailers are essentially identical except for small modifications to account for the differences in cask geometry. The authors are designing both trailers to carry a 55,000 lb (24,900 kg) payload and to withstand a 2.5 g vertical design load. The GA-4 and GA-9 trailers are designed for significantly higher loads than are typical commercial semitrailers, which are designed to loads in the range of 1.7 to 2.0 g. To meet the federal gross vehicle weight limit for legal-weight trucks, GA has set a target design weight for the trailers of 9000 lb (4080 kg). This weight includes the personnel barrier, cask tiedowns, and impact limiter removal and storage system. Based on the preliminary trailer designs, the final design weight will to be very close to this target weight

Carry

DEFF Research Database (Denmark)

Koijen, Ralph S.J.; Moskowitz, Tobias J.; Heje Pedersen, Lasse

that include global equities, global bonds, currencies, commodities, US Treasuries, credit, and equity index options. This predictability underlies the strong returns to "carry trades" that go long high-carry and short low-carry securities, applied almost exclusively to currencies, but shown here...

Computing System Construction of Water Environment Carrying Capacity in Huaihe River Basin%淮河流域水环境承载能力计算系统的构建

Institute of Scientific and Technical Information of China (English)

严子奇; 夏军; 左其亭; 张永勇

2009-01-01

本文介绍了淮河流域水环境承载能力计算系统的总体设计、承载力数学模型的建立、软件系统的结构及应用.研究中通过计算在维系"良好水环境状况"目标下流域所能承载的社会经济规模上限来得到流域水环境承载能力.在耦合了社会经济系统模型、水资源转化关系模型、水环境系统模拟模型的基础上利用数据库、地理信息系统、可视化编程技术将"社会经济-水资源-水环境"系统模型、生态需水量计算模型、以及水环境承载能力计量模型中众多的边界条件、控制条件、可变参数及成果分析进行系统集成.所建立的淮河流域水环境承载能力计算系统可有效地实现流域现状水环境承裁能力的计算以及对未来不同时刻、不同频率来水条件下的承载力进行情景分析计算,为流域水环境承载能力管理提供决策支持.%In this paper, the overall designs and mathematical model of water environment carrying capacity, as well as the system structure and application of water environment carrying capacity computing system in Huaihe River Basin are presented. The carrying capacity of water environment in river basin is reached by calculating the upper limit of the socio-economic scale that watershed can carry under the "good status of water environment". The system is based on an integrated "socio-economic-water resource-water environment" model which is coupled with the socio-economic system model, the water resource transformation relation model and the simulation model of water environment system. The population size is a key indicator to reflect the water environment carrying capacity of the basin, and iterative algorithm is used to get the maximum population size of different water environment carrying capacities. This system also contains a subroutine for ecological water requirement model. The mean value of the results from the Tennant method, base flow method and

Durability testing of the high-capacity GA-4/GA-9 trailer

International Nuclear Information System (INIS)

Zimmer, A.

1993-01-01

General Atomics (GA) is under contract to the US Department of Energy (DOE), Idaho Field Office, to develop two legal-weight truck from-reactor spent-fuel shipping casks with trailers. GA is developing these high capacity transport systems to support the Office of Civilian Radioactive Waste Management's (OCRWM) mission to transport spent fuel from reactors to a permanent disposal site. GA's goal is to maximize the number of fuel assemblies that the transport system can safely carry. The GA-4 Cask is being designed to transport four pressurized-water-reactor (PWR) spent-fuel assemblies, and the GA-9 Cask is being designed to transport nine boiling-water-reactor (BWR) spent-fuel assemblies. The use of these high-capacity transport systems will have a large benefit to-public safety since the number of legal-weight truck shipments will be reduced by at least a factor of four over existing spent-fuel shipping cask systems. Achieving these capacities requires that the weight of each component of the transport system. i.e., cask, trailer and tractor, be minimized. The weight of the trailer is of particular importance. With a high load-to-weight ratio, the durability and reliability of the trailer become significant factors in the success of the transport system. In order to verify that the trailer design will meet the durability and performance requirements to safely transport spent-fuel, GA has planned an extensive testing program. The testing program includes non-destructive examination (NDE) of the trailer welds, operational testing, a static load test, an over-the-road performance test, and a test to verify the durability of the trailer up to its 1,000,000-mile design life. Since a prototype cask will not be available for the testing, GA designed and built a dummy payload that simulates the correct weight distribution and approximates the dynamic response of the prototype cask

Cultural carrying capacity: Organ donation advocacy, discursive framing, and social media engagement.

Science.gov (United States)

Bail, Christopher A

2016-09-01

Social media sites such as Facebook have become a powerful tool for public health outreach because they enable advocacy organizations to influence the rapidly increasing number of people who frequent these forums. Yet the very open-ness of social media sites creates fierce competition for public attention. The vast majority of social media messages provoke little or no reaction because of the sheer volume of information that confronts the typical social media user each day. In this article, I present a theory of the "cultural carrying capacity" of social media messaging campaigns. I argue that advocacy organizations inspire more endorsements, comments, and shares by social media users if they diversify the discursive content of their messages. Yet too much diversification creates large, disconnected audiences that lack the sense of shared purpose necessary to sustain an online movement. To evaluate this theory, I created a Facebook application that collects social media posts produced by forty-two organ donation advocacy organizations over 1.5 years, as well as supplemental information about the organization, its audience, and the broader social context in which they interact. Time series models provide strong evidence for my theory net of demographic characteristics of social media users, the resources and tactics of each organization, and broader external factors. I conclude by discussing the implications of these findings for public health, cultural sociology, and the nascent field of computational social science. Copyright © 2016 Elsevier Ltd. All rights reserved.

Ligand-enhanced electrokinetic remediation of metal-contaminated marine sediments with high acid buffering capacity.

Science.gov (United States)

Masi, Matteo; Iannelli, Renato; Losito, Gabriella

2016-06-01

The suitability of electrokinetic remediation for removing heavy metals from dredged marine sediments with high acid buffering capacity was investigated. Laboratory-scale electrokinetic remediation experiments were carried out by applying two different voltage gradients to the sediment (0.5 and 0.8 V/cm) while circulating water or two different chelating agents at the electrode compartments. Tap water, 0.1 M citric acid and 0.1 M ethylenediaminetetraacetic acid (EDTA) solutions were used respectively. The investigated metals were Zn, Pb, V, Ni and Cu. In the unenhanced experiment, the acid front could not propagate due to the high acid buffering capacity of the sediments; the production of OH(-) ions at the cathode resulted in a high-pH environment causing the precipitation of CaCO3 and metal hydroxides. The use of citric acid prevented the formation of precipitates, but solubilisation and mobilisation of metal species were not sufficiently achieved. Metal removal was relevant when EDTA was used as the conditioning agent, and the electric potential was raised up to 0.8 V/cm. EDTA led to the formation of negatively charged complexes with metals which migrated towards the anode compartment by electromigration. This result shows that metal removal from sediments with high acid buffering capacity may be achieved by enhancing the electrokinetic process by EDTA addition when the acidification of the medium is not economically and/or environmentally sustainable.

Measurement of the carrying capacity of benthic habitats using a metabolic-rate based index.

Science.gov (United States)

Edgar, G J

1993-03-01

Carrying capacities of grazed habitats are typically expressed as numbers or biomass of animals per unit area; however, such parameters are appropriate only when the body size of animals is constant because consumption and other metabolic-rate based parameters such as respiration and production are proportional to body mass raised by a power of ≈0.75 rather than 0 or 1. Habitat carrying levels are therefore better expressed in the form of an index of total community consumption by summing the body masses of individual animals after they have been scaled using a biomass exponent of ≈0.75. A parameter scaled in this way,P 20 , varied in a predictable manner when calculated for the mobile epifaunal assemblages associated with rope fibre habitats placed at marine and estuarine sites;P 20 showed no significant difference between 17 shallow, clear-water sites worldwide, but declined consistently when photosynthesis was reduced.P 20 also did not vary significantly when calculated for the mobile epifaunal communities associated with fourAmphibolis antarctica seagrass habitats in Australia ([Formula: see text] = 100 µg ·g -1 · day -1 ), and reached but did not significantly exceed a ceiling of ≈280 μg · g -1 · day -1 forSargassum plants. These results are consistent with the hypothesis that the production of shallow-water epifaunal communities of grazers is constrained by resource ceilings which can be quantified using metabolic-rate based indices. If this "production ceiling" hypothesis is correct then diffuse competition is generally more important than predation or environmental disturbance in restricting the growth of mobile epifaunal populations.

Experimental and numerical assessment of the improvement of the load-carrying capacities of butterfly-shaped coupling components in composite structures

International Nuclear Information System (INIS)

Altan, Gurkan; Topcu, Muzaffer

2010-01-01

This study was designed to analyze the load-carrying capacities of composite structures connected face-to-face by a butterfly coupling component experimentally and numerically without adhesive. The results of the experimental studies were supported with numerical analysis. In addition, the butterfly coupling component was developed geometrically with a view to the results of the numerical and experimental studies. The change in the load-carrying capacity of the improved butterfly coupling components was analyzed numerically and experimentally to obtain new results. Half-specimens and butterfly-shaped lock components were cut with a water jet machine. Experiments and analyses were conducted to analyze the effects of coupling geometry parameters, such as the ratio of the butterfly end width to the specimen width (w/b), the ratio of the butterfly middle width to the butterfly end width (x/w), and the ratio of the butterfly half height to the specimen width (y/b). It was intended to determine the damage in the butterfly before any damage to the composite structure and to increase the service-life span of the composite structure with the repair of the butterfly lock. As a result of this study, it was determined that the geometrical fixed ratios (w/b) and (x/w) were 0.4 and 0.2 at 0.4 of (y/b) according to the experimental and numerical studies with basic and modified models

Development of urbanization in arid and semi arid regions based on the water resource carrying capacity -- a case study of Changji, Xinjiang

Science.gov (United States)

Xiao, H.; Zhang, L.; Chai, Z.

2017-07-01

The arid and semiarid region in China where have a relatively weak economic foundation, independent development capacity, and the low-level of urbanization. The new urbanization within these regions is facing severe challenges brought by the constraints of resources. In this paper, we selected the Changji Hui Autonomous Prefecture, Xinjiang Uyghur Autonomous Region as study area. We found that agricultural planting structure is the key water consumption index based on the research about the main water demands of domestic, agriculture and industry. Finally, we suggest that more attentions should be paid to the rational utilization of water resources, population carrying capacity, and adjust and upgrade the industrial structure, with the purpose of coordination with the Silk Road Economic Belt.

MIMO Intensity-Modulation Channels: Capacity Bounds and High SNR Characterization

KAUST Repository

Chaaban, Anas

2016-10-01

The capacity of MIMO intensity modulation channels is studied. The nonnegativity of the transmit signal (intensity) poses a challenge on the precoding of the transmit signal, which limits the applicability of classical schemes in this type of channels. To resolve this issue, capacity lower bounds are developed by using precoding-free schemes. This is achieved by channel inversion or QR decomposition to convert the MIMO channel to a set of parallel channels. The achievable rate of a DC-offset SVD based scheme is also derived as a benchmark. Then, a capacity upper bound is derived and is shown to coincide with the achievable rate of the QR decomposition based scheme at high SNR, consequently characterizing the high-SNR capacity of the channel. The high-SNR gap between capacity and the achievable rates of the channel inversion and the DC-offset SVD based schemes is also characterized. Finally, the ergodic capacity of the channel is also briefly discussed.

Tourism Planning and Design Based on the Environmental Carrying Capacity%基于环境承载力的旅游规划设计

Institute of Scientific and Technical Information of China (English)

冀慧萍

2015-01-01

旅游的发展必然会对环境造成一定的影响,如何在发展旅游与保护环境之间取得平衡,是旅游规划设计中必须考虑的一个焦点问题. 环境承载能力又称环境容量,基于环境承载力进行旅游规划设计,能很好地确保旅游与环境间的和谐发展. 笔者对环境承载力进行了简要概述,提出了基于环境自洁能力、基于环境再生能力、基于生态足迹的旅游环境承载力的计算方法. 就基于环境承载能力的旅游规划设计进行了探讨,对地区旅游业的可持续发展、旅游资源的开发和调整、旅游环境的保护具有重要意义.%The development of tourism causes certain effect on the environment, and how to achieve a balance between tourism development and environmental protection is a focus problem, which in the tourism planning and design must be considered.Environmental carrying capacity is also called the environment capacity, tourism planning and design based on the environmental carrying capacity can ensure the harmonious development between tourism and environment.In this pa-per, tourism planning and design based on the environmental carrying capacity are discussed, which has positive signifi-cance for the sustainable development of regional tourism experience, the development of tourism resources and the adjust-ment, the protection of tourism environment .

Efficient Identification of Objects Carrying Elements of High-Order Symmetry By Using Correlated Orbital Angular Momentum (OAM States

Directory of Open Access Journals (Sweden)

Sergienko Alexander V.

2014-01-01

The potential for efficient identification of objects carrying elements of high-order symmetry using correlated orbital angular momentum (OAM states is demonstrated. The enhanced information capacity of this approach allows the recognition of specific spatial symmetry signatures present in objects with the use of fewer resources than in a conventional pixel-by-pixel imaging, representing the first demonstration of compressive sensing using OAM states. This approach demonstrates the capability to quickly evaluate multiple Fourier coefficients directly linked with the symmetry features of the object. The results suggest further application in small-scale biological contexts where symmetry and small numbers of noninvasive measurements are important.

Construction and Capacity Analysis of High-Rank LoS MIMO Channels in High Speed Railway Scenarios

Directory of Open Access Journals (Sweden)

Jingya Yang

2012-01-01

Full Text Available The validity of the maximum capacity criterion applied to realize high-rank line-of-sight (LoS multiple-input multiple-output (MIMO channels is investigated for high speed railway scenarios. Performance is evaluated by ergodic capacity. Numerical results demonstrate that by simply adjusting antenna spacing according to the maximum capacity criterion, significant capacity gains are achievable. We find relatively low sensitivity of the system to displacements from the optimal point and angle in relatively short range. Thus, we present two proposals to reconfigure antenna arrays so as to maximize LoS MIMO capacity in the high speed railway scenarios

Assessing Potential Habitat and Carrying Capacity for Reintroduction of Plains Bison (Bison bison bison in Banff National Park.

Directory of Open Access Journals (Sweden)

Robin Steenweg

Full Text Available Interest in bison (Bison bison, B. bonasus conservation and restoration continues to grow globally. In Canada, plains bison (B. b. bison are threatened, occupying less than 0.5% of their former range. The largest threat to their recovery is the lack of habitat in which they are considered compatible with current land uses. Fences and direct management make range expansion by most bison impossible. Reintroduction of bison into previously occupied areas that remain suitable, therefore, is critical for bison recovery in North America. Banff National Park is recognized as historical range of plains bison and has been identified as a potential site for reintroduction of a wild population. To evaluate habitat quality and assess if there is sufficient habitat for a breeding population, we developed a Habitat Suitability Index (HSI model for the proposed reintroduction and surrounding areas in Banff National Park (Banff. We then synthesize previous studies on habitat relationships, forage availability, bison energetics and snowfall scenarios to estimate nutritional carrying capacity. Considering constraints on nutritional carrying capacity, the most realistic scenario that we evaluated resulted in an estimated maximum bison density of 0.48 bison/km2. This corresponds to sufficient habitat to support at least 600 to 1000 plains bison, which could be one of the largest 10 plains bison populations in North America. Within Banff, there is spatial variation in predicted bison habitat suitability and population size that suggests one potential reintroduction site as the most likely to be successful from a habitat perspective. The successful reintroduction of bison into Banff would represent a significant global step towards conserving this iconic species, and our approach provides a useful template for evaluating potential habitat for other endangered species reintroductions into their former range.

Antioxidant Capacity, Radical Scavenging Kinetics and Phenolic ...

African Journals Online (AJOL)

HP

Phenolic Profile of Methanol Extracts of Wild Plants of. Southern Sonora ... plant extracts. Phenolic compounds determination was carried out by high ... Determination of antioxidant capacity ..... In vitro antioxidant and antiproliferative activities ...

Crack-resistant polyimide coating for high-capacity battery anodes

Science.gov (United States)

Li, Yingshun; Wang, Shuo; Lee, Pui-Kit; He, Jieqing; Yu, Denis Y. W.

2017-10-01

Electrode cracking is a serious problem that hinders the application of many next-generation high-capacity anode materials for lithium-ion batteries. Even though nano-sizing the material can reduce fracturing of individual particles, capacity fading is still observed due to large volume change and loss of contact in the electrode during lithium insertion and extraction. In this study, we design a crack-resistant high-modulus polyimide coating with high compressive strength which can hold multiple particles together during charge and discharge to maintain contact. The effectiveness of the coating is demonstrated on tin dioxide, a high-capacity large-volume-change material that undergoes both alloy and conversion reactions. The polyimide coating improves capacity retention of SnO2 from 80% to 100% after 80 cycles at 250 mA g-1. Stable capacity of 585 mAh g-1 can be obtained even at 500 mA g-1 after 300 cycles. Scanning electron microscopy and in-situ dilatometry confirm that electrode cracking is suppressed and thickness change is reduced with the coating. In addition, the chemically-stable polyimide film can separate the surface from direct contact with electrolyte, improving coulombic efficiency to ∼100%. We expect the novel strategy of suppressing electrode degradation with a crack-resistant coating can also be used for other alloy and conversion-based anodes.

Development of high capacity, high rate lithium ion batteries utilizing metal fiber conductive additives

Science.gov (United States)

Ahn, Soonho; Kim, Youngduk; Kim, Kyung Joon; Kim, Tae Hyung; Lee, Hyungkeun; Kim, Myung H.

As lithium ion cells dominate the battery market, the performance improvement is an utmost concern among developers and researchers. Conductive additives are routinely employed to enhance electrode conductivity and capacity. Carbon particulates—graphite or carbon black powders—are conventional and popular choices as conductive fillers. However, percolation requirements of particles demand significant volumetric content of impalpable, and thereby high area conductive fillers. As might be expected, the electrode active surface area escalates unnecessarily, resulting in overall increase in reaction with electrolytes and organic solvents. The increased reactions usually manifest as an irreversible loss of anode capacity, gradual oxidation and consumption of electrolyte on the cathode—which causes capacity decline during cycling—and an increased threat to battery safety by gas evolution and exothermic solvent oxidation. In this work we have utilized high aspect ratio, flexible, micronic metal fibers as low active area and high conductivity additives. The metal fibers appear well dispersed within the electrode and to satisfy percolation requirements very efficiently at very low volumetric content compared to conventional carbon-based conductive additives. Results from 18650-type cells indicate significant enhancements in electrode capacity and high rate capability while the irreversible capacity loss is negligible.

When High-Capacity Readers Slow Down and Low-Capacity Readers Speed Up: Working Memory and Locality Effects.

Science.gov (United States)

Nicenboim, Bruno; Logačev, Pavel; Gattei, Carolina; Vasishth, Shravan

2016-01-01

We examined the effects of argument-head distance in SVO and SOV languages (Spanish and German), while taking into account readers' working memory capacity and controlling for expectation (Levy, 2008) and other factors. We predicted only locality effects, that is, a slowdown produced by increased dependency distance (Gibson, 2000; Lewis and Vasishth, 2005). Furthermore, we expected stronger locality effects for readers with low working memory capacity. Contrary to our predictions, low-capacity readers showed faster reading with increased distance, while high-capacity readers showed locality effects. We suggest that while the locality effects are compatible with memory-based explanations, the speedup of low-capacity readers can be explained by an increased probability of retrieval failure. We present a computational model based on ACT-R built under the previous assumptions, which is able to give a qualitative account for the present data and can be tested in future research. Our results suggest that in some cases, interpreting longer RTs as indexing increased processing difficulty and shorter RTs as facilitation may be too simplistic: The same increase in processing difficulty may lead to slowdowns in high-capacity readers and speedups in low-capacity ones. Ignoring individual level capacity differences when investigating locality effects may lead to misleading conclusions.

When high-capacity readers slow down and low-capacity readers speed up: Working memory and locality effects

Directory of Open Access Journals (Sweden)

Bruno eNicenboim

2016-03-01

Full Text Available We examined the effects of argument-head distance in SVO and SOV languages (Spanish and German, while taking into account readers’ working memory capacity and controlling for expectation (Levy, 2008 and other factors. We predicted only locality effects, that is, a slow-down produced by increased dependency distance (Gibson, 2000; Lewis & Vasishth, 2005. Furthermore, we expected stronger locality effects for readers with low working memory capacity. Contrary to our predictions, low-capacity readers showed faster reading with increased distance, while high-capacity readers showed locality effects. We suggest that while the locality effects are compatible with memory-based explanations, the speedup of low-capacity readers can be explained by an increased probability of retrieval failure. We present a computational model based on ACT-R built under the previous assumptions, which is able to give a qualitative account for the present data and can be tested in future research. Our results suggest that in some cases, interpreting longer RTs as indexing increased processing difficulty and shorter RTs as facilitation may be too simplistic: The same increase in processing difficulty may lead to slowdowns in high-capacity readers and speedups in low-capacity ones. Ignoring individual level capacity differences when investigating locality effects may lead to misleading conclusions.

Estimating habitat carrying capacity for migrating and wintering waterfowl: Considerations, pitfalls and improvements

Science.gov (United States)

Williams, Christopher; Dugger, Bruce D.; Brasher, Michael G.; Coluccy, John M.; Cramer, Dane M.; Eadie, John M.; Gray, Matthew J.; Hagy, Heath M.; Livolsi, Mark; McWilliams, Scott R.; Petrie, Matthew; Soulliere, Gregory J.; Tirpak, John M.; Webb, Elisabeth B.

2014-01-01

Population-based habitat conservation planning for migrating and wintering waterfowl in North America is carried out by habitat Joint Venture (JV) initiatives and is based on the premise that food can limit demography (i.e. food limitation hypothesis). Consequently, planners use bioenergetic models to estimate food (energy) availability and population-level energy demands at appropriate spatial and temporal scales, and translate these values into regional habitat objectives. While simple in principle, there are both empirical and theoretical challenges associated with calculating energy supply and demand including: 1) estimating food availability, 2) estimating the energy content of specific foods, 3) extrapolating site-specific estimates of food availability to landscapes for focal species, 4) applicability of estimates from a single species to other species, 5) estimating resting metabolic rate, 6) estimating cost of daily behaviours, and 7) estimating costs of thermoregulation or tissue synthesis. Most models being used are daily ration models (DRMs) whose set of simplifying assumptions are well established and whose use is widely accepted and feasible given the empirical data available to populate such models. However, DRMs do not link habitat objectives to metrics of ultimate ecological importance such as individual body condition or survival, and largely only consider food-producing habitats. Agent-based models (ABMs) provide a possible alternative for creating more biologically realistic models under some conditions; however, ABMs require different types of empirical inputs, many of which have yet to be estimated for key North American waterfowl. Decisions about how JVs can best proceed with habitat conservation would benefit from the use of sensitivity analyses that could identify the empirical and theoretical uncertainties that have the greatest influence on efforts to estimate habitat carrying capacity. Development of ABMs at

Free-space optical communications with peak and average constraints: High SNR capacity approximation

KAUST Repository

Chaaban, Anas

2015-09-07

The capacity of the intensity-modulation direct-detection (IM-DD) free-space optical channel with both average and peak intensity constraints is studied. A new capacity lower bound is derived by using a truncated-Gaussian input distribution. Numerical evaluation shows that this capacity lower bound is nearly tight at high signal-to-noise ratio (SNR), while it is shown analytically that the gap to capacity upper bounds is a small constant at high SNR. In particular, the gap to the high-SNR asymptotic capacity of the channel under either a peak or an average constraint is small. This leads to a simple approximation of the high SNR capacity. Additionally, a new capacity upper bound is derived using sphere-packing arguments. This bound is tight at high SNR for a channel with a dominant peak constraint.

Voluntary Running Aids to Maintain High Body Temperature in Rats Bred for High Aerobic Capacity

Science.gov (United States)

Karvinen, Sira M.; Silvennoinen, Mika; Ma, Hongqiang; Törmäkangas, Timo; Rantalainen, Timo; Rinnankoski-Tuikka, Rita; Lensu, Sanna; Koch, Lauren G.; Britton, Steven L.; Kainulainen, Heikki

2016-01-01

The production of heat, i.e., thermogenesis, is a significant component of the metabolic rate, which in turn affects weight gain and health. Thermogenesis is linked to physical activity (PA) level. However, it is not known whether intrinsic exercise capacity, aging, and long-term voluntary running affect core body temperature. Here we use rat models selectively bred to differ in maximal treadmill endurance running capacity (Low capacity runners, LCR and High capacity Runners, HCR), that as adults are divergent for aerobic exercise capacity, aging, and metabolic disease risk to study the connection between PA and body temperature. Ten high capacity runner (HCR) and ten low capacity runner (LCR) female rats were studied between 9 and 21 months of age. Rectal body temperature of HCR and LCR rats was measured before and after 1-year voluntary running/control intervention to explore the effects of aging and PA. Also, we determined whether injected glucose and spontaneous activity affect the body temperature differently between LCR and HCR rats at 9 vs. 21 months of age. HCRs had on average 1.3°C higher body temperature than LCRs (p temperature level of HCRs to similar levels with LCRs. The opportunity to run voluntarily had a significant impact on the body temperature of HCRs (p temperature at a similar level as when at younger age. Compared to LCRs, HCRs were spontaneously more active, had higher relative gastrocnemius muscle mass and higher UCP2, PGC-1α, cyt c, and OXPHOS levels in the skeletal muscle (p temperature of LCRs. However, glucose injection resulted in a lowering of the body temperature of LCRs (p temperature compared to rats born with low exercise capacity and disease risk. Voluntary running allowed HCRs to maintain high body temperature during aging, which suggests that high PA level was crucial in maintaining the high body temperature of HCRs. PMID:27504097

岩溶地区资源环境承载力分析——以贵州省为例%Research on the Resource and Environmental Carrying Capacity of Karst Region

Institute of Scientific and Technical Information of China (English)

王金凤; 代稳; 马士彬; 王立威

2017-01-01

With the rapid development of social economy, the contradiction between population, resources and environment is becoming more and more serious, and the carrying capacity of resources and environment is under great pressure, especially in karst area. Using the analytic hierarchy process and the state space method, constructing evaluation index system of resources and environment carrying capacity of the karst area from three aspects:resource carrying capacity,environmental carrying capacity and social economic coordination,selecting water resources, land resources, tourism resources, water environment, atmospheric environment, population, economy and society as the evaluation index layer,this paper will evaluate quantitatively the resources and environment carrying capacity in Guizhou Province in 2000, 2004 and 2008 and 2013 four phase. The results showed that resources and environment carrying capacity in Guizhou Province showed a low level state and have to the middle level towards the trend in 2013 because the resources and environment capacity index in 2000, 2004, 2008 and 2013 is 0.09364, 0.08957, 0.09230, 0.0113.Zunyi City, in Qiandongnan Prefecture, Guizhou southwest Prefecture three administrative region of resources and environment carrying capacity is in medium state and the rest of the six administrative regions in the lower level in nine administrative regions.%随着社会经济的飞速发展,人口、资源与环境之间的矛盾日趋加剧,资源环境承载力面临着巨大的压力,尤其是岩溶地区.本文利用层次分析与状态空间法,从资源承载力、环境承载力和社会经济协调力三个方面构建岩溶地区资源环境承载力评价体系,选取水资源、土地资源、旅游资源、水环境、大气环境、人口、经济及社会为评价指标层,对贵州省2000、2004、2008和2013年4个时相的资源环境承载力进行了定量评价.结果表明:贵州省2000、2004、2008、2013�

On the High Altitude Platform (HAP W-CDMA System Capacity

Directory of Open Access Journals (Sweden)

L. de Haro-Ariet

2004-06-01

Full Text Available The performance of a downlink power control model, based on a n-thpower distance law, is evaluated for high altitude platform station(HAPS W-CDMA systems. The downlink capacity using this model iscompared with the uplink capacity. It is shown that the uplink capacityis higher than the downlink capacity.

High-capacity quantum secure direct communication with two-photon six-qubit hyperentangled states

Science.gov (United States)

Wu, FangZhou; Yang, GuoJian; Wang, HaiBo; Xiong, Jun; Alzahrani, Faris; Hobiny, Aatef; Deng, FuGuo

2017-12-01

This study proposes the first high-capacity quantum secure direct communication (QSDC) with two-photon six-qubit hyper-entangled Bell states in two longitudinal momentum and polarization degrees of freedom (DOFs) of photon pairs, which can be generated using two 0.5 mm-thick type-I β barium borate crystal slabs aligned one behind the other and an eight-hole screen. The secret message can be independently encoded on the photon pairs with 64 unitary operations in all three DOFs. This protocol has a higher capacity than previous QSDC protocols because each photon pair can carry 6 bits of information, not just 2 or 4 bits. Our QSDC protocol decreases the influence of decoherence from environment noise by exploiting the decoy photons to check the security of the transmission of the first photon sequence. Compared with two-way QSDC protocols, our QSDC protocol is immune to an attack by an eavesdropper using Trojan horse attack strategies because it is a one-way quantum communication. The QSDC protocol has good applications in the future quantum communication because of all these features.

Optical signal processing for enabling high-speed, highly spectrally efficient and high capacity optical systems

Science.gov (United States)

Fazal, Muhammad Irfan

may be possible. Recently, interest has increased in exploring the spatial dimension of light to increase capacity, both in fiber as well as free-space communication channels. The orbital angular momentum (OAM) of light, carried by Laguerre-Gaussian (LG) beams have the interesting property that, in theory, an infinite number of OAMs can be transmitted; which due to its inherent orthogonality will not affect each other. Thus, in theory, one can increase the channel capacity arbitrarily. However, in practice, the device dimensions will reduce the number of OAMs used. In addition to advanced modulation formats, it is expected that optical signal processing may play a role in the future development of more efficient optical transmission systems. The hope is that performing signal processing in the optical domain may reduce optical-to-electronic conversion inefficiencies, eliminate bottlenecks and take advantage of the ultrahigh bandwidth inherent in optics. While 40 to 50 Gbit/s electronic components are the peak of commercial technology and 100 Gbit/s capable RF components are still in their infancy, optical signal processing of these high-speed data signals may provide a potential solution. Furthermore, any optical processing system or sub-system must be capable of handling the wide array of data formats and data rates that networks may employ. The work presented in this Ph.D. dissertation attempts at addressing the issue of optical processing for advanced optical modulation formats, and particularly explores the state of the art in increasing the capacity of an optical link by a combination of wavelength/phase/polarization/OAM dimensions of light. Spatial multiplexing and demultiplexing of both coherently and directly detected signals at the 100 Gbit/s Ethernet standard is addressed. The application of a continuously tunable all-optical delay for all-optical functionality like time-slot interchange at high data-rates is presented. Moreover the interplay of chirp

Examining the Resilience of Crop Production, Livestock Carrying Capacity, and Woodland Density in a Rural Zimbabwean Socio-Ecological System Using Agent-Based Models Representing Human Management Decisions

Science.gov (United States)

Eitzel Solera, M. V.; Neves, K.; Veski, A.; Solera, J.; Omoju, O. E.; Mawere Ndlovu, A.; Wilson, K.

2016-12-01

As climate change increases the pressures on arid ecosystems by changing timing and amount of rainfall, understanding the ways in which human management choices affect the resilience of these systems becomes key to their sustainability. On marginal farmland in Mazvihwa, Midlands Province, the historical carrying capacity of livestock has been consistently surprisingly high. We explore this phenomenon by building an agent-based model in NetLogo from a wealth of long-term data generated by the community-based participatory research team of The Muonde Trust, a Zimbabwean non-governmental organization. We combine the accumulated results of 35 years of indigenous and local knowledge with national datasets such as rainfall records. What factors keep the carrying capacity high? What management choices can maintain crops, livestock, and woodland at levels necessary for the community's survival? How do these choices affect long-term sustainability, and does increasing resilience at one scale reduce resilience at another scale? We use our agent-based model to explore the feedbacks between crops, livestock, and woodland and the impacts of various human choices as well as temporal and spatial ecological variation. By testing different scenarios, we disentangle the complex interactions between these components. We find that some factors out of the community's control can strongly affect the sustainability of the system through times of drought, and that supplementary feed may maintain livestock potentially at the expense of other resources. The challenges to resilience encountered by the farmers in Mazvihwa are not unique - many indigenous and rural people face drought and the legacies of colonialism, which contribute to lowered resilience to external challenges such as climate change, epidemics, and political instability. Using the agent-based model as a tool for synthesis and exploration initiates discussion about resilience-enhancing management choices for Mazvihwa's farmer-researchers.

Research on Eco-environment Carrying Capacity of Nanyi Valley Scenic Area%南伊沟景区生态环境承载力研究

Institute of Scientific and Technical Information of China (English)

包杰; 杨小林; 王忠斌

2015-01-01

Eco-environment carrying capacity of Nanyi Valley Scenic Area in Milin County,Linzhi area,Tibet was studied, the results showed that the recent ecological footprint of the scenic area was 674.70 hm2,effective ecological carrying capacity was 841.13 hm2,and ecological surplus was 166.43 hm2. In terms of current and short-term planning of the scenic area,tourism activities will not bring serious damages to the ecological environment,and ecological footprint of the study area can be further developed. But from the perspective of ecological carrying capacity,the scenic area needs a proper long-term planning,so the paper proposes the sustainable development strategies for the Nanyi Valley Scenic Area. It provides the theoretic basis for the reasonable planning,effective management and sustainable development of the scenic area.%对西藏林芝地区米林县南伊沟景区进行生态环境承载力研究，结果表明，近期南伊沟景区生态足迹量为674.70 hm2，有效生态承载力841.13 hm2，生态盈余166.43 hm2。就景区目前及近期规划来说，开展旅游活动不会对景区生态环境产生大的影响，景区生态足迹还可进一步发展。但从生态承载力方面考虑，景区应特别注意远期规划。提出了南伊沟景区可持续发展对策。

Does visual short-term memory have a high-capacity stage?

Science.gov (United States)

Matsukura, Michi; Hollingworth, Andrew

2011-12-01

Visual short-term memory (VSTM) has long been considered a durable, limited-capacity system for the brief retention of visual information. However, a recent work by Sligte et al. (Plos One 3:e1699, 2008) reported that, relatively early after the removal of a memory array, a cue allowed participants to access a fragile, high-capacity stage of VSTM that is distinct from iconic memory. In the present study, we examined whether this stage division is warranted by attempting to corroborate the existence of an early, high-capacity form of VSTM. The results of four experiments did not support Sligte et al.'s claim, since we did not obtain evidence for VSTM retention that exceeded traditional estimates of capacity. However, performance approaching that observed in Sligte et al. can be achieved through extensive practice, providing a clear explanation for their findings. Our evidence favors the standard view of VSTM as a limited-capacity system that maintains a few object representations in a relatively durable form.

The Tourism Carrying Capacity of Underwater Trails in Isabel Island National Park, Mexico

Science.gov (United States)

Ríos-Jara, Eduardo; Galván-Villa, Cristian Moisés; Rodríguez-Zaragoza, Fabián Alejandro; López-Uriarte, Ernesto; Muñoz-Fernández, Vicente Teófilo

2013-08-01

The popularity of ecotourism in the marine protected areas of Mexico has increased over the last 10 years; in particular there is a large development of a SCUBA diving industry in the Mexican Pacific including Isabel Island. Given the risks associated with human activity in the marine environments around this island, we propose two ecotourism management strategies: (1) the creation and use of underwater trails, and (2) the estimation of the specific tourism carrying capacity (TCC) for each trail. Six underwater trails were selected in sites that presented elements of biological, geological, and scenic interest, using information obtained during field observations. The methodology used to estimate the TCC was based upon the physical and biological conditions of each site, the infrastructure and equipment available, and the characteristics of the service providers and the administrators of the park. Correction factors of the TCC included elements of the quality of the visit and the threat and vulnerability of the marine environment of each trail (e.g., divers' expertise, size and distance between groups of divers, accessibility, wind, coral coverage). The TCC values ranged between 1,252 and 1,642 dives/year/trail, with a total of 8,597 dives/year for all six trails. Although these numbers are higher than the actual number of recreational visitors to the island (~1,000 dives per year), there is a need for adequate preventive management if the diving sites are to maintain their esthetic appeal and biological characteristics. Such management might be initially directed toward using only the sites and the TCC proposed here.

The tourism carrying capacity of underwater trails in Isabel Island National Park, Mexico.

Science.gov (United States)

Ríos-Jara, Eduardo; Galván-Villa, Cristian Moisés; Rodríguez-Zaragoza, Fabián Alejandro; López-Uriarte, Ernesto; Muñoz-Fernández, Vicente Teófilo

2013-08-01

The popularity of ecotourism in the marine protected areas of Mexico has increased over the last 10 years; in particular there is a large development of a SCUBA diving industry in the Mexican Pacific including Isabel Island. Given the risks associated with human activity in the marine environments around this island, we propose two ecotourism management strategies: (1) the creation and use of underwater trails, and (2) the estimation of the specific tourism carrying capacity (TCC) for each trail. Six underwater trails were selected in sites that presented elements of biological, geological, and scenic interest, using information obtained during field observations. The methodology used to estimate the TCC was based upon the physical and biological conditions of each site, the infrastructure and equipment available, and the characteristics of the service providers and the administrators of the park. Correction factors of the TCC included elements of the quality of the visit and the threat and vulnerability of the marine environment of each trail (e.g., divers' expertise, size and distance between groups of divers, accessibility, wind, coral coverage). The TCC values ranged between 1,252 and 1,642 dives/year/trail, with a total of 8,597 dives/year for all six trails. Although these numbers are higher than the actual number of recreational visitors to the island (~1,000 dives per year), there is a need for adequate preventive management if the diving sites are to maintain their esthetic appeal and biological characteristics. Such management might be initially directed toward using only the sites and the TCC proposed here.

Developing Leadership Capacity in Others: An Examination of High School Principals' Personal Capacities for Fostering Leadership

Science.gov (United States)

Huggins, Kristin Shawn; Klar, Hans W.; Hammonds, Hattie L.; Buskey, Frederick C.

2017-01-01

In this multisite case study, we examine the personal capacities of six high school principals who have developed the leadership capacities of other leaders in their respective schools. Participants were purposefully selected by two teams of researchers in two states of the United States, one on the east coast and one on the west coast, who…

Load carrying capacity of keyed joints reinforced with high strength wire rope loops

OpenAIRE

Jørgensen, Henrik B.; Hoang, Linh Cao

2015-01-01

Vertical shear connections between precast concrete wall elements are usually made as keyed joints reinforced with overlapping U-bars. The overlapping U-bars form a cylindrical core in which the locking bar is placed and the connection is subsequently grouted with mortar. A more construction friendly shear connection can be obtained by replacing the U-bars with high strength looped wire ropes. The wire ropes have the advantage of being flexible (they have virtually no bending stiffness) which...

OTDM Networking for Short Range High-Capacity Highly Dynamic Networks

DEFF Research Database (Denmark)

Medhin, Ashenafi Kiros

This PhD thesis aims at investigating the possibility of designing energy-efficient high-capacity (up to Tbit/s) optical network scenarios, leveraging on the effect of collective switching of many bits simultaneously, as is inherent in high bit rate serial optical data signals. The focus...... is on short range highly dynamic networks, catering to data center needs. The investigation concerns optical network scenarios, and experimental implementations of high bit rate serial data packet generation and reception, scalable optical packet labeling, simple optical label extraction and stable ultra...

Using Urban-Carrying Capacity as a Benchmark for Sustainable Urban Development: An Empirical Study of Beijing

Directory of Open Access Journals (Sweden)

Yigang Wei

2015-03-01

Full Text Available Sustainable urban development has been receiving growing concerns from both city managers and urban residents across the world. As a yardstick of sustainability, urban carrying capacity (UCC is an important conceptual underpinning that guides local governments in promoting sustainable urban development. However, existing studies still lack consensus not only on the theoretical aspects, but also on the methodological issues for UCC monitoring and evaluation. A knowledge gap exists, which this paper fills. This study aims to develop a practical UCC assessment framework to guide urban development towards achieving sustainability. The quantitative-based assessment framework provides a set of measurable indicators and benchmarks for city managers to conduct routine monitoring on progress toward urban sustainability, and helps identify deficient areas, which urgently need resource allocation to improve UCC. Focusing on a case study of Beijing, this study demonstrates that the framework is useful in promoting urban sustainability. This framework provides rich implications for other city prototypes in China as the nation marches into the next phase of development.

Evaluation of fiber’s misorientation effect on compliance and load carry capacity of shaped composite beams

Science.gov (United States)

Polilov, A. N.; Tatus’, N. A.

2018-04-01

The goal of this paper is analysis of design methods for composite beams and plates with curvilinear fiber trajectories. The novelty of this approach is determined by the fact that traditional composite materials are typically formed using prepregs with rectilinear fibers only. The results application area is associated with design process for shaped composite structure element by using of biomechanical principles. One of the related problems is the evaluation of fiber’s misorientation effect on stiffness and load carry capacity of shaped composite element with curvilinear fiber trajectories. Equistrong beam with constant cross-section area is considered as example, and it can be produced by unidirectional fiber bunch forming, impregnated with polymer matrix. Effective elastic modulus evaluation methods for structures with curvilinear fiber trajectories are validated. Misorientation angle range (up to 5o) when material with required accuracy can be considered as homogeneous, neglecting fiber misorientation, is determined. It is shown that for the beams with height-to-width ratio small enough it is possible to consider 2D misorientation only.

Study on carbon carried capacity in coastal city-A case study on Qingdao%沿海城市碳承载力研究——以青岛市为例

Institute of Scientific and Technical Information of China (English)

关丽娟; 丁德文; 刘大海; 赵鸣

2013-01-01

在构建沿海城市碳承载力评价指标体系的基础上,采用熵权法为指标赋权,构建了沿海城市碳承载力模型,并按照其取值范围将沿海城市碳承载水平划分为严重空载、轻度空载、适载、轻度超载和严重超载五个级别.利用所建模型和2000～ 2009年数据对青岛市碳承载状况进行了分析,研究表明:近几年来青岛市碳承载力状况良好,且2009年青岛市碳承载力为0.9左右,整体处于较为理想的适载状态.影响青岛市碳承载状况的主要因素包括经济增长、环境、能源、产业结构、城市化等方面.青岛市建立低碳发展模式降低碳排放,维持碳承载平衡应从调整产业结构、转变经济发展方式、建立低碳发展的长效机制、保护资源环境、大力开发新能源、发展低碳旅游业和进一步完善区域性碳承载力理论体系等方面努力.%The model of carbon carried capacity in the coastal city was structured on the basis of constructing the evaluation index system of carbon carried capacity in the coastal city. In this model, the weight of each index is determined by adopting the entropy weight method. According to its value scope, carbon carried capacity in the coastal city was divided into five levels: the serious no-load, mild no-load,proper loaded,mild overload and serious overload. The status of carbon carried capacity in Qingdao from 2000 to 2009 was analyzed by the above model. The results show that the carbon carried capacity state of Qingdao was good in resent years and its carbon carried capacity ratio in 2009 is 0.9 or so, which was in the ideal state. The main factors that influence Qingdao' s carbon loaded status including the economic growth, environment, energy, industry structure, urbanization, etc. are described. The low carbon development model for Qingdao should be established, for reducing the carbon emissions and maintaining the carbon loaded balance. It should endeavor to

Dynamic Management of Carrying Capacity in Mountain Heritage%山岳型遗产地环境容量动态管理研究

Institute of Scientific and Technical Information of China (English)

王德刚; 赵建峰; 黄潇婷

2015-01-01

��容量、资源与游客安全管理体系中解决了旅游流动态监控、及时预警、提前调节等关键问题，实现了遗产地旅游开放状态下的环境、资源与游客管理的安全可控。%Assessment and management of heritage carrying capacity involve many disciplines. Traditional static measurements obtain the optimal value and saturation value for a certain space, which is the main technical method of traditional carrying capacity study. However, tourists, the subjects who affect carrying capacity of environment are dynamic. Especially, as to Mountain heritage sites, its environmental capacity are relatively limited for their topography characteristics. Massive and concentrated visits will not only increase the pressure of environmental protection, but also influence the quality of tourist experience, and even sometimes threaten tourist physical security. Traditional researches on tourism environmental capacity mainly depend on static measurement. By introducing time dimension and analyzing the rule of spatiotemporal distribution of tourist flow, this paper proposed a new method of dynamic management of carrying capacity in mountain heritage through putting forward the concept of “the spatiotemporal bayonet of tourist flow”, and recognizes it with time geography method. The results of data analysis of Mountain Tai show that there are seven spatial bayonets, which are Red Gate, Stone Valley, Half Way Gate to Heaven, South Gate to Heaven, Tianjie, Jade Emperor Peak and Riguan peak, while the temporal bayonets are decentralization relatively. All those temporal-spatial bayonets of the middle route in Mountain Tai only account for 5. 52% of the whole area, which attract almost 50. 04% tourists. Hence one can see that, recognition and management of Space-Time Bayonet of tourists flow is quite important to dynamic management of carrying capacity in mountain heritage. Besides, this paper discussed the academic contribution of the spatiotemporal bayonet of tourist flow and its potential application practically through regulating tourist ’s behavior, controlling tourism environmental capacity dynamically and building intelligent early-warning system three aspect

A Comparative Analysis on Assessment of Land Carrying Capacity with Ecological Footprint Analysis and Index System Method.

Directory of Open Access Journals (Sweden)

Yao Qian

Full Text Available Land carrying capacity (LCC explains whether the local land resources are effectively used to support economic activities and/or human population. LCC can be evaluated commonly with two approaches, namely ecological footprint analysis (EFA and the index system method (ISM. EFA is helpful to investigate the effects of different land categories whereas ISM can be used to evaluate the contributions of social, environmental, and economic factors. Here we compared the two LCC-evaluation approaches with data collected from Xiamen City, a typical region where rapid economic growth and urbanization are found in China. The results show that LCC assessments with EFA and ISM not only complement each other but also are mutually supportive. Both assessments suggest that decreases in arable land and increasingly high energy consumption have major negative effects on LCC and threaten sustainable development for Xiamen City. It is important for the local policy makers, planners and designers to reduce ecological deficits by controlling fossil energy consumption, protecting arable land and forest land from converting into other land types, and slowing down the speed of urbanization, and to promote sustainability by controlling rural-to-urban immigration, increasing hazard-free treatment rate of household garbage, and raising energy consumption per unit industrial added value. Although EFA seems more appropriate for estimating LCC for a resource-output or self-sufficient region and ISM is more suitable for a resource-input region, both approaches should be employed when perform LCC assessment in any places around the world.

Proceedings from a Workshop on Ecological Carrying Capacity of Salmonids in the Columbia River Basin : Measure 7.1A of the Northwest Power Planning Council`s 1994 Fish and Wildlife Program : Report 3 of 4, Final Report.

Energy Technology Data Exchange (ETDEWEB)

Johnson, Gary E.; Neitzel, D.A.; Mavros, William V.

1996-05-01

This report contains the proceedings of a workshop held during 1995 in Portland, Oregon. The objective of the workshop was to assemble a group of experts that could help us define carrying capacity for Columbia River Basin salmonids. The workshop was one activity designed to answer the questions asked in Measure 7.1A of the Council`s Fish and Wildlife Program. Based, in part, on the information we learned during the workshop we concluded that the approach inherent in 7.1A will not increase understanding of ecology, carrying capacity, or limiting factors that influence salmon under current conditions. Measure 7.1A requires a definition of carrying capacity and a list of determinants (limiting factors) of capacity. The implication or inference then follows that by asking what we know and do not know about the determinants will lead to research that increases our understanding of what is limiting salmon survival. It is then assumed that research results will point to management actions that can remove or repair the limiting factors. Most ecologists and fisheries scientists that have studied carrying capacity clearly conclude that this approach is an oversimplification of complex ecological processes. To pursue the capacity parameter, that is, a single number or set of numbers that quantify how many salmon the basin or any part of the basin can support, is meaningless by itself and will not provide useful information.

Reversible anionic redox chemistry in high-capacity layered-oxide electrodes

Science.gov (United States)

Sathiya, M.; Rousse, G.; Ramesha, K.; Laisa, C. P.; Vezin, H.; Sougrati, M. T.; Doublet, M.-L.; Foix, D.; Gonbeau, D.; Walker, W.; Prakash, A. S.; Ben Hassine, M.; Dupont, L.; Tarascon, J.-M.

2013-09-01

Li-ion batteries have contributed to the commercial success of portable electronics and may soon dominate the electric transportation market provided that major scientific advances including new materials and concepts are developed. Classical positive electrodes for Li-ion technology operate mainly through an insertion-deinsertion redox process involving cationic species. However, this mechanism is insufficient to account for the high capacities exhibited by the new generation of Li-rich (Li1+xNiyCozMn(1-x-y-z)O2) layered oxides that present unusual Li reactivity. In an attempt to overcome both the inherent composition and the structural complexity of this class of oxides, we have designed structurally related Li2Ru1-ySnyO3 materials that have a single redox cation and exhibit sustainable reversible capacities as high as 230 mA h g-1. Moreover, they present good cycling behaviour with no signs of voltage decay and a small irreversible capacity. We also unambiguously show, on the basis of an arsenal of characterization techniques, that the reactivity of these high-capacity materials towards Li entails cumulative cationic (Mn+→M(n+1)+) and anionic (O2-→O22-) reversible redox processes, owing to the d-sp hybridization associated with a reductive coupling mechanism. Because Li2MO3 is a large family of compounds, this study opens the door to the exploration of a vast number of high-capacity materials.

Binders and Hosts for High-Capacity Lithium-ion Battery Anodes

Science.gov (United States)

Dufficy, Martin Kyle

Lithium-ion batteries (LIBs) are universal electrochemical energy storage devices that have revolutionized our mobile society. Nonetheless, societal and technological advances drive consumer demand for LIBs with enhanced electrochemical performance, such as higher charge capacity and longer life, compared to conventional LIBs. One method to enhance LIB performance is to replace graphite, the industry standard anode since commercialization of LIBs in 1991, with high-charge capacity materials. Implementing high-capacity anode materials such as tin, silicon, and manganese vanadates, to LIBs presents challenges; Li-insertion is destructive to anode framework, and increasing capacity increases structural strains that pulverize anode materials and results in a short-cycle life. This thesis reports on various methods to extended the cycle life of high-capacity materials. Most of the work is conducted on nano-sized anode materials to reduce Li and electron transport pathway length (facilitating charge-transfer) and reduce strains from volume expansions (preserving anode structure). The first method involves encapsulating tin particles into a graphene-containing carbon nanofiber (CNF) matrix. The composite-CNF matrix houses tin particles to assume strains from tin-volume expansions and produces favorable surface-electrolyte chemistries for stable charge-discharge cycling. Before tin addition, graphene-containing CNFs are produced and assessed as anode materials for LIBs. Graphene addition to CNFs improves electronic and mechanical properties of CNFs. Furthermore, the 2-D nature of graphene provides Li-binding sites to enhance composite-CNF both first-cycle and high-rate capacities > 150% when compared to CNFs in the absence of graphene. With addition of Sn, we vary loadings and thermal production temperature to elucidate structure-composition relationships of tin and graphene-containing CNF electrodes that lead to increased capacity retention. Of note, electrodes containing

Multiple Carrying Capacities from a management-oriented perspective to operationalize sustainable tourism in protected areas.

Science.gov (United States)

Salerno, Franco; Viviano, Gaetano; Manfredi, Emanuela C; Caroli, Paolo; Thakuri, Sudeep; Tartari, Gianni

2013-10-15

This article describes how the concept of Tourism Carrying Capacity (TCC) has shifted from a uni-dimensional approach to incorporating environmental, social and political aspects. This shift is demonstrated by a study of a large, internationally popular protected area used by trekkers, the Mt. Everest Region, where qualitative data collected from visitors was combined with environmental modeling using a participatory framework. Tourist satisfaction showed positive margins for further tourist industry expansion, but current environmental conditions limit growth and further development. Space and time dimensions were also considered. We observed that the limits on growth and further development can be manipulated, with a certain degree of flexibility, through investments and regulatory measures. We hypothesized that TCC can play an important role in the management of protected areas only if it is viewed as a systematic, strategic policy tool within a planning process rather than as a unique, intrinsic number that is not modifiable. We conclude that to translate the strategy into action using standard measures, further investigation is needed to balance the various TCC components as a part of a decision-making framework that includes the integration of different cultural approaches and policy needs. Copyright © 2013 Elsevier Ltd. All rights reserved.

High-capacity conductive nanocellulose paper sheets for electrochemically controlled extraction of DNA oligomers.

Directory of Open Access Journals (Sweden)

Aamir Razaq

Full Text Available Highly porous polypyrrole (PPy-nanocellulose paper sheets have been evaluated as inexpensive and disposable electrochemically controlled three-dimensional solid phase extraction materials. The composites, which had a total anion exchange capacity of about 1.1 mol kg(-1, were used for extraction and subsequent release of negatively charged fluorophore tagged DNA oligomers via galvanostatic oxidation and reduction of a 30-50 nm conformal PPy layer on the cellulose substrate. The ion exchange capacity, which was, at least, two orders of magnitude higher than those previously reached in electrochemically controlled extraction, originated from the high surface area (i.e. 80 m(2 g(-1 of the porous composites and the thin PPy layer which ensured excellent access to the ion exchange material. This enabled the extractions to be carried out faster and with better control of the PPy charge than with previously employed approaches. Experiments in equimolar mixtures of (dT(6, (dT(20, and (dT(40 DNA oligomers showed that all oligomers could be extracted, and that the smallest oligomer was preferentially released with an efficiency of up to 40% during the reduction of the PPy layer. These results indicate that the present material is very promising for the development of inexpensive and efficient electrochemically controlled ion-exchange membranes for batch-wise extraction of biomolecules.

Capacity Decline and Characteristics Changes of Lithium-ion Cells with Large Capacity during Trickle Charge at High Temperature

Science.gov (United States)

Matsushima, Toshio

Large-scale 40-Ah Li-ion cells have been developed for use in industrial applications. To contribute to techniques for ascertaining the state of these cells and detecting deterioration during actual use, we produce a cell whose capacity is reduced by trickle charging at high temperature, and we determine the relationship between the cell's properties such as its capacity and charging/discharging characteristics when the capacity is reduced. When the capacity of a Li-ion cell is reduced, the discharge voltage also decreases. We show that the residual capacity is well correlated to the discharge voltage and to the duration of continuous discharge before reaching a fixed end-voltage. We also show that the constant-current constant-voltage charging characteristics are maintained even when the capacity is degraded, and that the constant-current charging time and discharge voltage are closely related to the residual capacity. We confirm that the reaction coefficient of the capacity degradation formula can be calculated from the capacity change characteristics at multiple temperatures, and that an 8°C change in temperature causes the lifetime to decrease by half.

High capacity argon extraction and purification system. [Suitable for age estimation of rocks

Energy Technology Data Exchange (ETDEWEB)

Balogh, K; Morik, Gy [Magyar Tudomanyos Akademia Atommag Kutato Intezete, Debrecen

1979-01-01

A high capacity metal-glass argon extraction and purification system has been developed for K/Ar dating of geologic materials. A set of samples can be loaded simultaneously and degassed in turn in the system by high frequency induction heating in a molybdenum crucible. The argon purification is carried out by titanium sponge, molecular sieve, copper oxide and glass and charcoal filled traps cooled by liquid nitrogen. The /sup 38/Ar spike and the atmospheric argon used for calibrating the mass spectrometer are dispensed by a gas-pipette system. 80-120 minutes after starting the degassing of the sample, the purified argon can be introduced into the mass spectrometer; the gettering materials regenerate in 1-5 hours, thus 1-3 samples may be analysed a day. The atmospheric argon inflow during an experimental process is less than 5x10/sup -8/ cc STP.

Completion of a high efficiency ultralarge capacity three-phase transformer

International Nuclear Information System (INIS)

Maejima, Masaaki; Maruyama, Katsuya; Fukuda, Teruo.

1986-01-01

As for the boosting transformers for thermal and nuclear power stations, at present the ultralarge capacity transformers of 1000 - 1200 MVA class are the main, and particularly in nuclear power, accompanying the development of improved type BWRs and the rise of system stability, there is the tendency toward further large capacity and large size. Consequently, reflecting the recent rise of energy cost, the demand of energy conservation and the reduction of required sites heightened largely as well as the high reliability. In order to meet these demands, Hitachi Ltd. has established the technology of changing to iron machines such as ultralarge iron cores and ultralarge capacity undivided disk windings using the latest design and manufacture techniques were applied to the 525 kV, 1200 MVA transformer for No.4 plant in Fukushima No.2 Nuclear Power Station, Tokyo Electric Power Co., Inc., thus a three-phase transformer of the highest level, high efficiency and ultralarge capacity was completed. In this paper, the outline of this transformer and the test for verifying its reliability are described. The technical change of large capacity three-phase transformers, the specifications, construction, manufacture, reliability test and the effect of modification of this transformer, and the expansion of application to the next generation ultralarge capacity transformers are reported. (Kako, I.)

Effects of tidal cycles on shorebird distribution and foraging behaviour in a coastal tropical wetland: Insights for carrying capacity assessment

Science.gov (United States)

Fonseca, Juanita; Basso, Enzo; Serrano, David; Navedo, Juan G.

2017-11-01

Wetland loss has driven negative effects on biodiversity by a reduction in potential available habitats, directly impacting wetland-dependent species such as migratory shorebirds. At coastal areas where tidal cycles can restrict food access, the degree to which density of foraging birds is mediated by conspecific abundance or by the available areas is crucial to understanding patterns of bird distribution and wetland carrying capacity. We used the bathymetry of two sectors modeled with two numerical matrices to determine the availability of intertidal foraging areas in relation to tidal level (spring and neap tides), and this information was used to estimate shorebird density and foraging activity throughout the low-tide cycle in a tropical coastal lagoon in northwestern Mexico. Relative to spring tides, an 80% reduction in available foraging areas occurred during neap tides. Overall shorebird abundance was significantly reduced during neap tide periods, with differences between species. Densities of shorebirds increased during neap tides, particularly in one sector, and remained similar throughout the low-tide period (i.e. 4 h) either during spring or neap tides. Time spent foraging was consistently lower during neap-tides relative to spring-tides, especially for Long-billed curlew (44% reduction), Willet (37% reduction) and Black-necked stilt (29% reduction). These decreases in foraging activity when available habitats became reduced can hamper the opportunities of migratory shorebirds to reach their daily energy requirements to survive during the non-breeding season. This study shows that when intertidal habitats are severely reduced an important fraction of shorebird populations would probably be forced to find alternative areas to forage or increase foraging time during the night. Serving an essential function as top-predators, these results can have important implications on carrying capacity assessment for shorebirds at coastal wetlands.

农业生产与水资源承载力评价%Agricultural production and evaluation in terms of water resources carrying capacity

Institute of Scientific and Technical Information of China (English)

虞祎; 张晖; 胡浩

2016-01-01

AbstractBased on the evaluation of water resources carrying capacity, especially taking into account the impact of agricultural pollution on sustainable use of water resources, a comprehensive analysis was conducted on the strains of water resources due to farming and animal production in different regions of China to provide reference for rational estimation of potential agricultural growth and correct approaches for structural adjustments in agriculture. Excess nitrogen and grey water were calculated as indicators to quantify the impact of agricultural pollution on water resources. Following nutrient balance theory, excess nitrogen was the difference between the sum of nitrogen provided by chemical fertilizer, livestock manure and soil, and total nitrogen needed by farming. Grey water was the amount of water required for diluting excessively high concentration of nitrogen in water to a more environmental-friendly level. Agricultural water footprint was the sum of agricultural water and grey water used. The huge quantity of excess nitrogen produced by farming and livestock consequently led to excessive amount of grey water, which more than doubled the amount of water used in agriculture. There was therefore the need to reserve enough environmental space for diluting pollution when estimating water resources carrying capacity based on water sustainability and healthy development. Water surplus were constructed to reflect the potential of water resources to support agricultural production with detailed environmental consideration. Water surplus was the difference between water resources and agricultural water footprint. Using 2003-2012 nationwide samples, a panel data model was constructed to analyze the impact of change in sown area and livestock head on water surplus. The results suggested that the nationwide water in China could carry a maximum of 168.89 million hm2 or 3.57 billion pigs. The water resources carrying capacity model results also showed that the

Colloidal silica films for high-capacity DNA arrays

Science.gov (United States)

Glazer, Marc Irving

The human genome project has greatly expanded the amount of genetic information available to researchers, but before this vast new source of data can be fully utilized, techniques for rapid, large-scale analysis of DNA and RNA must continue to develop. DNA arrays have emerged as a powerful new technology for analyzing genomic samples in a highly parallel format. The detection sensitivity of these arrays is dependent on the quantity and density of immobilized probe molecules. We have investigated substrates with a porous, "three-dimensional" surface layer as a means of increasing the surface area available for the synthesis of oligonucleotide probes, thereby increasing the number of available probes and the amount of detectable bound target. Porous colloidal silica films were created by two techniques. In the first approach, films were deposited by spin-coating silica colloid suspensions onto flat glass substrates, with the pores being formed by the natural voids between the solid particles (typically 23nm pores, 35% porosity). In the second approach, latex particles were co-deposited with the silica and then pyrolyzed, creating films with larger pores (36 nm), higher porosity (65%), and higher surface area. For 0.3 mum films, enhancements of eight to ten-fold and 12- to 14-fold were achieved with the pure silica films and the films "templated" with polymer latex, respectively. In gene expression assays for up to 7,000 genes using complex biological samples, the high-capacity films provided enhanced signals and performed equivalently or better than planar glass on all other functional measures, confirming that colloidal silica films are a promising platform for high-capacity DNA arrays. We have also investigated the kinetics of hybridization on planar glass and high-capacity substrates. Adsorption on planar arrays is similar to ideal Langmuir-type adsorption, although with an "overshoot" at high solution concentration. Hybridization on high-capacity films is

长治湿地公园生态旅游环境容量研究%Study on the Ecotourism Carrying Capacity of Changzhi Wetland Park

Institute of Scientific and Technical Information of China (English)

宋珂; 樊正球; 信欣; 王新军; 王原

2011-01-01

生态旅游环境容量作为衡量旅游环境与旅游发展是否协调的重要尺度,为旅游的可持续发展提供了较为客观的判断依据.从长治湿地公园自身的承受能力出发,综合旅游生态容量（Ce）与旅游空间容量（Cs）两方面因素评估区域的生态旅游环境容量（其中Ce为40 632～52 366（人次/d）,Cs为28 872～55 376（人次/d）,对长治湿地公园的规划建设和管理提出3个不同的情景方案.%Ecotourism carrying capacity is a standard to measure the coordination between tourism environment and tourism development.It provides a basis judgment for the sustainable development of tourism.Based on the analyses of the ecological environmental carrying capacity（Ce）and the ecological spatial carrying capacity（Cs）,an integrated estimation on the carrying capacity of Changzhi Wetland Park was made（In which Ce is 40632—52366 passengers/day,Cs is 28872—55376 passengers/day）.Finally,three scenario programs were put forward,which could be of practical and instructive significances in the planning and management of this wetland park.

A Study of Tourism Environmental Carrying Capacity in Yalong Bay Tropical Paradise Forest Park%亚龙湾热带天堂森林公园旅游环境容量研究

Institute of Scientific and Technical Information of China (English)

杨波; 王文

2014-01-01

选择森林公园类型旅游区---亚龙湾森林公园为研究对象，通过分析旅游容量指标体系，定量研究了该景区的旅游环境容量。研究结果表明：亚龙湾森林公园的旅游生态环境容量为6600人次，旅游空间环境容量为8244人次，旅游功能设施容量为6400人次，旅游社会心理容量为2310人次，综合旅游环境容量为6200人次。生物环境容量、交通环境容量和游客心理环境容量成为制约景区接待规模的限制因子。在三亚旅游旺季，尤其是春节黄金周期间，整个景区呈现超载状态。针对出现的过载问题，提出了新建扩建景点和游步道、扩建停车场面积、合理安排停车组织方式和园区内交通组织及建立淡旺季两套管理等措施，以提高亚龙湾森林公园的整体环境容量并缓解旅游旺季带来的环境容量超载问题。%the article selects the forest park type of tourist area---Yalong Bay T ropical Forest Park as the study object .Through the analysis of the system of tourism environmental capacity ,the article conducts a quantitative research of the tourism area's tourism environmental capacity .T he results show that the park's tourist environmental carrying capacity ,tourism spatial capacity ,tourist facilities carrying capacity ,tourist capacity of social psychology , and comprehensive tourism environment capacity are 6600 ,8244 ,6400 ,2310 and 6200 persons per day respectively . T he biological environmental capacity , traffic environmental capacity and tourists psychological environmental capacity are identified as key factors that limit the tourist carrying capacity in Yalong Bay Forest Park .In Sanya's peak tourist season in ,especially during Spring Festival ,the entire resort is in the situation of overload .To deal with the overload problem ,this article proposes several measures ,such as expanding new resort ,touring path and parking lot ,improving parking system and traffic

High-Capacity Quantum Secure Communication with Authentication Using Einstein-Podolsky-Rosen Pairs

International Nuclear Information System (INIS)

Xiao Min; Xu Hong-Wei

2015-01-01

A new protocol for quantum secure communication with authentication is proposed. The proposed protocol has a higher capacity as each EPR pair can carry four classical bits by the XOR operation and an auxiliary photon. The security and efficiency are analyzed in detail and the major advantage of this protocol is that it is more efficient without losing security. (paper)

Reassembling and testing of a high-precision heat capacity drop calorimeter. Heat capacity of some polyphenyls at T = 298.15 K

Energy Technology Data Exchange (ETDEWEB)

Santos, Luis M.N.B.F., E-mail: lbsantos@fc.up.pt [Centro de Investigacao em Quimica, Departamento de Quimica e Bioquimica, Faculdade de Ciencias, Universidade do Porto, Rua do Campo Alegre, 687, 4169-007 Porto (Portugal); Rocha, Marisa A.A.; Rodrigues, Ana S.M.C. [Centro de Investigacao em Quimica, Departamento de Quimica e Bioquimica, Faculdade de Ciencias, Universidade do Porto, Rua do Campo Alegre, 687, 4169-007 Porto (Portugal); Stejfa, Vojtech; Fulem, Michal [Department of Physical Chemistry, Institute of Chemical Technology, Technicka 5, CZ-166 28 Prague 6 (Czech Republic); Bastos, Margarida [Centro de Investigacao em Quimica, Departamento de Quimica e Bioquimica, Faculdade de Ciencias, Universidade do Porto, Rua do Campo Alegre, 687, 4169-007 Porto (Portugal)

2011-12-15

Graphical abstract: Highlights: > We present the reassembling, improvement and testing of a high-precision C{sub p} drop calorimeter. > The apparatus was tested, using benzoic acid and hexafluorobenzene. > The high sensitivity of the apparatus is comparable to the one obtained in adiabatic calorimetry. > Heat capacities at T = 298.15 K of some polyphenyls were measured. > Subtle heat capacity differences among position isomers (ortho, meta, para) were detected. - Abstract: The description of the reassembling and testing of a twin heat conduction, high-precision, drop microcalorimeter for the measurement of heat capacities of small samples are presented. The apparatus, originally developed and used at the Thermochemistry Laboratory, Lund, Sweden, has now been reassembled and modernized, with changes being made as regarding temperature sensors, electronics and data acquisition system. The apparatus was thereafter thoroughly tested, using benzoic acid and hexafluorobenzene as test substances. The accuracy of the C{sub p,m}{sup 0} (298.15 K) data obtained with this apparatus is comparable to that achieved by high-precision adiabatic calorimetry. Here we also present the results of heat capacity measurements on of some polyphenyls (1,2,3-triphenylbenzene, 1,3,5-triphenylbenzene, p-terphenyl, m-terphenyl, o-terphenyl, p-quaterphenyl) at T = 298.15 K, measured with the renewed high precision heat capacity drop calorimeter system. The high resolution and accuracy of the obtained heat capacity data enabled differentiation among the ortho-, meta-, and para-phenyl isomers.

A New Methodology for Solving Trajectory Planning and Dynamic Load-Carrying Capacity of a Robot Manipulator

Directory of Open Access Journals (Sweden)

Wanjin Guo

2016-01-01

Full Text Available A new methodology using a direct method for obtaining the best found trajectory planning and maximum dynamic load-carrying capacity (DLCC is presented for a 5-degree of freedom (DOF hybrid robot manipulator. A nonlinear constrained multiobjective optimization problem is formulated with four objective functions, namely, travel time, total energy involved in the motion, joint jerks, and joint acceleration. The vector of decision variables is defined by the sequence of the time-interval lengths associated with each two consecutive via-points on the desired trajectory of the 5-DOF robot generalized coordinates. Then this vector of decision variables is computed in order to minimize the cost function (which is the weighted sum of these four objective functions subject to constraints on joint positions, velocities, acceleration, jerks, forces/torques, and payload mass. Two separate approaches are proposed to deal with the trajectory planning problem and the maximum DLCC calculation for the 5-DOF robot manipulator using an evolutionary optimization technique. The adopted evolutionary algorithm is the elitist nondominated sorting genetic algorithm (NSGA-II. A numerical application is performed for obtaining best found solutions of trajectory planning and maximum DLCC calculation for the 5-DOF hybrid robot manipulator.

Glove powder's carrying capacity for latex protein: analysis using the ASTM ELISA test.

Science.gov (United States)

Beezhold, D; Horton, K; Hickey, V; Daddona, J; Kostyal, D

2003-01-01

Glove donning powders carry latex proteins and disperse them into the workplace environment. We have used the ASTM D6499 ELISA to quantify the amount of latex antigen bound to and carried by glove powders. We could differentiate between a small amount of protein actually bound to the powders and a larger amount carried by the powder. Enhanced binding of a major allergen, Hev b 5, to the starch powders was demonstrated by Western blot. The D6499 ELISA is able to measure total latex antigen, soluble and powder bound, simultaneously without the need to centrifuge the samples.

Modelling PM 10 concentrations and carrying capacity associated with woodheater emissions in Launceston, Tasmania

Science.gov (United States)

Luhar, Ashok K.; Galbally, Ian E.; Keywood, Melita

Launceston is one of the Australian cities most affected by particle pollution due to the use of woodheaters in the winter months, with frequent exceedences of the national standard, the National Environment Protection Measure for Ambient Air Quality (or Air NEPM in short), of 50 micrograms per cubic metre for daily PM 10 (particulate matter with an aerodynamic diameter of 10 μm or less). The main objective of the present study was to determine the woodheater carrying capacity for Launceston—the number of woodheaters that can operate in the city without exceeding the Air NEPM. For this purpose, a prognostic meteorological and air pollution model called TAPM is used, coupled to a gridded woodheater PM 10 emissions inventory. The latter was derived using information on dwelling density, the percentage of dwellings with woodheaters, woodheater emission rates and their diurnal and seasonal variations, and the proportions of compliant/non-compliant woodheaters and open fireplaces. The model simulations are performed for the year 1998, and the concentrations are scaled for previous and subsequent years using trends in woodheater numbers and types. The modelled number of exceedences of the Air NEPM for the period 1997-2004 is in good agreement with the observations. The modelling indicates that the PM 10 Air NEPM would be met in Launceston when the total number of woodheaters is 20% of the total number of dwellings, of which 76%, 18%, 6% would be compliant woodheaters, non-compliant woodheaters and open fireplaces, respectively. With the present trends in the regional woodheater profile, this should occur in the year 2007.

Transparent hydrogel with enhanced water retention capacity by introducing highly hydratable salt

Energy Technology Data Exchange (ETDEWEB)

Bai, Yuanyuan; Xiang, Feng; Wang, Hong, E-mail: hwang@mail.xjtu.edu.cn, E-mail: suo@seas.harvard.edu [Electronic Materials Research Laboratory, School of Electronics and Information Engineering, Xi' an Jiaotong University, Xi' an 710049 (China); Chen, Baohong; Zhou, Jinxiong [State Key Laboratory for Strength and Vibration of Mechanical Structures, International Center for Applied Mechanics and School of Aerospace, Xi' an Jiaotong University, Xi' an 710049 (China); Suo, Zhigang, E-mail: hwang@mail.xjtu.edu.cn, E-mail: suo@seas.harvard.edu [School of Engineering and Applied Sciences, Kavli Institute of Bionano Science and Technology, Harvard University, Cambridge, Massachusetts 02138 (United States)

2014-10-13

Polyacrylamide hydrogels containing salt as electrolyte have been used as highly stretchable transparent electrodes in flexible electronics, but those hydrogels are easy to dry out due to water evaporation. Targeted, we try to enhance water retention capacity of polyacrylamide hydrogel by introducing highly hydratable salts into the hydrogel. These hydrogels show enhanced water retention capacity in different level. Specially, polyacrylamide hydrogel containing high content of lithium chloride can retain over 70% of its initial water even in environment with relative humidity of only 10% RH. The excellent water retention capacities of these hydrogels will make more applications of hydrogels become possible.

Transparent hydrogel with enhanced water retention capacity by introducing highly hydratable salt

International Nuclear Information System (INIS)

Bai, Yuanyuan; Xiang, Feng; Wang, Hong; Chen, Baohong; Zhou, Jinxiong; Suo, Zhigang

2014-01-01

Polyacrylamide hydrogels containing salt as electrolyte have been used as highly stretchable transparent electrodes in flexible electronics, but those hydrogels are easy to dry out due to water evaporation. Targeted, we try to enhance water retention capacity of polyacrylamide hydrogel by introducing highly hydratable salts into the hydrogel. These hydrogels show enhanced water retention capacity in different level. Specially, polyacrylamide hydrogel containing high content of lithium chloride can retain over 70% of its initial water even in environment with relative humidity of only 10% RH. The excellent water retention capacities of these hydrogels will make more applications of hydrogels become possible.

Representation of Solar Capacity Value in the ReEDS Capacity Expansion Model

Energy Technology Data Exchange (ETDEWEB)

Sigrin, B. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sullivan, P. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ibanez, E. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Margolis, R. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2014-03-01

An important issue for electricity system operators is the estimation of renewables' capacity contributions to reliably meeting system demand, or their capacity value. While the capacity value of thermal generation can be estimated easily, assessment of wind and solar requires a more nuanced approach due to the resource variability. Reliability-based methods, particularly assessment of the Effective Load-Carrying Capacity, are considered to be the most robust and widely-accepted techniques for addressing this resource variability. This report compares estimates of solar PV capacity value by the Regional Energy Deployment System (ReEDS) capacity expansion model against two sources. The first comparison is against values published by utilities or other entities for known electrical systems at existing solar penetration levels. The second comparison is against a time-series ELCC simulation tool for high renewable penetration scenarios in the Western Interconnection. Results from the ReEDS model are found to compare well with both comparisons, despite being resolved at a super-hourly temporal resolution. Two results are relevant for other capacity-based models that use a super-hourly resolution to model solar capacity value. First, solar capacity value should not be parameterized as a static value, but must decay with increasing penetration. This is because -- for an afternoon-peaking system -- as solar penetration increases, the system's peak net load shifts to later in the day -- when solar output is lower. Second, long-term planning models should determine system adequacy requirements in each time period in order to approximate LOLP calculations. Within the ReEDS model we resolve these issues by using a capacity value estimate that varies by time-slice. Within each time period the net load and shadow price on ReEDS's planning reserve constraint signals the relative importance of additional firm capacity.

A Review of Researches on Tourism Carrying Capacity Based on Meta-analysi%基于元分析的旅游承载力研究

Institute of Scientific and Technical Information of China (English)

张俊霞; 段文军; 赵立禄; 谢靖

2012-01-01

随着旅游可持续发展观念的不断深入，旅游承载力研究逐渐成为研究热点，为了了解旅游承载力当前研究现状及存在问题，并寻找其研究的新突破，文章借助元分析研究方法，对1979～2012年之间相关文献进行分类和统计。从文献数量变化、研究内容、研究对象、评价指标体系和旅游承载力评价方法等方面进行中外对比分析，分析相关研究在研究对象、指标选取和研究方法等方面的总体特征及国内外研究差异。%With the further development of the concept of the tourism sustainahle development, tourism carrying capacity is becoming a hot topic. This paper reviews the researches on tourism earrying capacity based on Mcta-analysis and compare the researches hetween China anti foreign countries. Through comparative analysis of relative literature from 1979 to 2012, we compared the umber of the literatures, contents and ohjects, evaluation index system and evaluation methodology. Then, this article analyzed the current research status and the problems in tourism carrying capacity researching. Lastly, some suggestions to deal with the existing problems were proposed.

Free-space optical communications with peak and average constraints: High SNR capacity approximation

KAUST Repository

Chaaban, Anas; Morvan, Jean-Marie; Alouini, Mohamed-Slim

2015-01-01

. Numerical evaluation shows that this capacity lower bound is nearly tight at high signal-to-noise ratio (SNR), while it is shown analytically that the gap to capacity upper bounds is a small constant at high SNR. In particular, the gap to the high

Recycling rice husks for high-capacity lithium battery anodes.

Science.gov (United States)

Jung, Dae Soo; Ryou, Myung-Hyun; Sung, Yong Joo; Park, Seung Bin; Choi, Jang Wook

2013-07-23

The rice husk is the outer covering of a rice kernel and protects the inner ingredients from external attack by insects and bacteria. To perform this function while ventilating air and moisture, rice plants have developed unique nanoporous silica layers in their husks through years of natural evolution. Despite the massive amount of annual production near 10(8) tons worldwide, so far rice husks have been recycled only for low-value agricultural items. In an effort to recycle rice husks for high-value applications, we convert the silica to silicon and use it for high-capacity lithium battery anodes. Taking advantage of the interconnected nanoporous structure naturally existing in rice husks, the converted silicon exhibits excellent electrochemical performance as a lithium battery anode, suggesting that rice husks can be a massive resource for use in high-capacity lithium battery negative electrodes.

Temperature dependences of growth rates and carrying capacities of marine bacteria depart from metabolic theoretical predictions

KAUST Repository

Huete-Stauffer, Tamara Megan

2015-09-11

Using the metabolic theory of ecology (MTE) framework, we evaluated over a whole annual cycle the monthly responses to temperature of the growth rates (μ) and carrying capacities (K) of heterotrophic bacterioplankton at a temperate coastal site. We used experimental incubations spanning 6oC with bacterial physiological groups identified by flow cytometry according to membrane integrity (live), nucleic acid content (HNA and LNA) and respiratory activity (CTC+). The temperature dependence of μat the exponential phase of growth was summarized by the activation energy (E), which was variable (-0.52 to 0.72 eV) but followed a seasonal pattern, only reaching the hypothesized value for aerobic heterotrophs of 0.65 eV during the spring bloom for the most active bacterial groups (live, HNA, CTC+). K (i.e. maximum experimental abundance) peaked at 4 × 106 cells mL-1 and generally covaried with μbut, contrary to MTE predictions, it did not decrease consistently with temperature. In the case of live cells, the responses of μand K to temperature were positively correlated and related to seasonal changes in substrate availability, indicating that the responses of bacteria to warming are far from homogeneous and poorly explained by MTE at our site. © FEMS 2015.

Assessing the air pollution carrying capacity of the northern Puget Sound region: an application of TAPAS

Energy Technology Data Exchange (ETDEWEB)

Wood, M.C.; Childs J.E.; Marlatt, W.E.

1980-09-01

The technique discussed, the Topographic Air Pollution Analysis System (TAPAS), was developed to provide valid information on the dispersion capability of the lower atmosphere in areas characterized by complex terrain features. A study was undertaken to assess the air quality (SO/sub 2/) impacts associated with energy development in the region and to determine the constraints on energy development due to regulated limitations on the amount of air quality degradation allowable in the area. The emission constraint analysis for the northern Puget Sound region indicated that total SO/sub 2/ emissions in the core area (on an annual basis) are less than half of the amount that could be tolerated in the entire core region while maintaining ambient concentrations within state and federal annual average limitations. However, comparison of source characteristics with source location and grid cell emission restrictions indicated that localized areas adjacent to the major point sources are already far in excess of the SO/sub 2/ carrying capacity. This conclusion is supported by air quality monitoring data that indicate state standard violations at several receptor locations within the study area. The annual maps of wind patterns and PI-Matrix values show areas of both good and poor dispersion characteristics under the most prevalent flow conditions.

Transparent hydrogel with enhanced water retention capacity by introducing highly hydratable salt

OpenAIRE

Bai, Yuanyuan; Chen, Baohong; Xiang, Feng; Zhou, Jinxiong; Wang, Hong; Suo, Zhigang

2014-01-01

Polyacrylamide hydrogels containing salt as electrolyte have been used as highly stretchable transparent electrodes in flexible electronics, but those hydrogels are easy to dry out due to water evaporation. Targeted, we try to enhance water retention capacity of polyacrylamide hydrogel by introducing highly hydratable salts into the hydrogel. These hydrogels show enhanced water retention capacity in different level. Specially, polyacrylamide hydrogel containing high content of lithium chlorid...

High-capacity composite adsorbents for nucleic acids.

Science.gov (United States)

Tiainen, Peter; Rokebul Anower, M; Larsson, Per-Olof

2011-08-05

Cytopore™ is a bead-shaped, macroporous and easily compressible cellulose-based anion-exchange material intended for cultivation of anchor-dependent animal cells. Reticulated vitreous carbon (RVC) is a strong, non-compressible, high voidage (97%) matrix material that can be cut to desired geometrical shapes. Cytopore and RVC were combined to cylindrical composites (25 mm × 10 mm) fitted inside chromatography columns. The composite combined the advantageous properties of both its constituents, making it suitable for column chromatography. The composite could withstand very high flow rates without compaction of the bed (>25 column volumes/min; 4000 cm h(-1)). Chromatography runs with tracers showed a low HETP value (0.3mm), suggesting that pore flow was in operation. The dynamic binding capacities (10% breakthrough) per gram of dry weight Cytopore were determined for several compounds including DNA and RNA and were found to be 240-370 mg/g. The composite was used to isolate pUC 18-type plasmids from a cleared alkaline lysate in a good yield. Confocal microscopy studies showed that plasmids were bound not only to the surface of the Cytopore material but also within the matrix walls, thus offering an explanation to the very high binding capacities observed. The concept of using a composite prepared from a mechanically weak, high-binding material and a strong scaffold material may be applied to other systems as well. Copyright © 2011 Elsevier B.V. All rights reserved.

Parametrical Method for Determining Optimal Ship Carrying Capacity and Performance of Handling Equipment

Directory of Open Access Journals (Sweden)

Michalski Jan P.

2016-04-01

Full Text Available The paper presents a method of evaluating the optimal value of the cargo ships deadweight and the coupled optimal value of cargo handling capacity. The method may be useful at the stage of establishing the main owners requirements concerning the ship design parameters as well as for choosing a proper second hand ship for a given transportation task. The deadweight and the capacity are determined on the basis of a selected economic measure of the transport effectiveness of ship – the Required Freight Rate. The mathematical model of the problem is of a deterministic character and the simplifying assumptions are justified for ships operating in the liner trade. The assumptions are so selected that solution of the problem is obtained in analytical closed form. The presented method can be useful for application in the preliminary ship design or in the simulation of pre-investment transportation task studies.

Maximizing the optical network capacity.

Science.gov (United States)

Bayvel, Polina; Maher, Robert; Xu, Tianhua; Liga, Gabriele; Shevchenko, Nikita A; Lavery, Domaniç; Alvarado, Alex; Killey, Robert I

2016-03-06

Most of the digital data transmitted are carried by optical fibres, forming the great part of the national and international communication infrastructure. The information-carrying capacity of these networks has increased vastly over the past decades through the introduction of wavelength division multiplexing, advanced modulation formats, digital signal processing and improved optical fibre and amplifier technology. These developments sparked the communication revolution and the growth of the Internet, and have created an illusion of infinite capacity being available. But as the volume of data continues to increase, is there a limit to the capacity of an optical fibre communication channel? The optical fibre channel is nonlinear, and the intensity-dependent Kerr nonlinearity limit has been suggested as a fundamental limit to optical fibre capacity. Current research is focused on whether this is the case, and on linear and nonlinear techniques, both optical and electronic, to understand, unlock and maximize the capacity of optical communications in the nonlinear regime. This paper describes some of them and discusses future prospects for success in the quest for capacity. © 2016 The Authors.

Heat capacity of iron, aluminum, and chromium vanadates at high temperatures

Energy Technology Data Exchange (ETDEWEB)

Cheshnitskii, S.M.; Fotiev, A.A.; Ignashin, V.P.; Kesler, Y.A.

1985-09-01

The thermodynamic characteristics of compounds participating in the processing of vanadium-containing raw materials have not been sufficiently investigated. In this paper the authors report on measurements of the heat capacities of the compounds FeVO/sub 4/, CrVO/sub 4/, AIVO/sub 4/, Fe/sub 2/V/sub 4/O/sub 13/ and FeCr(VO/sub 4/)/sub 2/ at high temperatures. The obtained experimental data on the high-temperature heat capacity of iron, aluminum, and chromium vanadates makes it possible to calculate the thermodynamic functions of these compounds at high temperatures.

Carrying capacity an approaching procedure to the economic value of natural patrimony

International Nuclear Information System (INIS)

Blandon M, Luis; Ochoa S, German; Ospina N, Efren

2001-01-01

This study demonstrates a new alternative method for valorizing the natural heritage of various economically and environmentally important ecosystems. It was conducted in the Piedras Blancas, Antioquia watershed and considered the degree of conservation of the area and its capacity for supporting humans, by means of extractive economic activities. In this way the ecosystem itself provides a natural offer of goods and services and therefore a good approximation of its economic value

Silicon oxide based high capacity anode materials for lithium ion batteries

Science.gov (United States)

Deng, Haixia; Han, Yongbong; Masarapu, Charan; Anguchamy, Yogesh Kumar; Lopez, Herman A.; Kumar, Sujeet

2017-03-21

Silicon oxide based materials, including composites with various electrical conductive compositions, are formulated into desirable anodes. The anodes can be effectively combined into lithium ion batteries with high capacity cathode materials. In some formulations, supplemental lithium can be used to stabilize cycling as well as to reduce effects of first cycle irreversible capacity loss. Batteries are described with surprisingly good cycling properties with good specific capacities with respect to both cathode active weights and anode active weights.

Crystalline-Amorphous Core−Shell Silicon Nanowires for High Capacity and High Current Battery Electrodes

KAUST Repository

Cui, Li-Feng

2009-01-14

Silicon is an attractive alloy-type anode material for lithium ion batteries because of its highest known capacity (4200 mAh/g). However silicon\\'s large volume change upon lithium insertion and extraction, which causes pulverization and capacity fading, has limited its applications. Designing nanoscale hierarchical structures is a novel approach to address the issues associated with the large volume changes. In this letter, we introduce a core-shell design of silicon nanowires for highpower and long-life lithium battery electrodes. Silicon crystalline- amorphous core-shell nanowires were grown directly on stainless steel current collectors by a simple one-step synthesis. Amorphous Si shells instead of crystalline Si cores can be selected to be electrochemically active due to the difference of their lithiation potentials. Therefore, crystalline Si cores function as a stable mechanical support and an efficient electrical conducting pathway while amorphous shells store Li ions. We demonstrate here that these core-shell nanowires have high charge storage capacity (̃1000 mAh/g, 3 times of carbon) with ̃90% capacity retention over 100 cycles. They also show excellent electrochemical performance at high rate charging and discharging (6.8 A/g, ̃20 times of carbon at 1 h rate). © 2009 American Chemical Society.

Peak capacity, peak-capacity production rate, and boiling point resolution for temperature-programmed GC with very high programming rates

Science.gov (United States)

Grall; Leonard; Sacks

2000-02-01

Recent advances in column heating technology have made possible very fast linear temperature programming for high-speed gas chromatography. A fused-silica capillary column is contained in a tubular metal jacket, which is resistively heated by a precision power supply. With very rapid column heating, the rate of peak-capacity production is significantly enhanced, but the total peak capacity and the boiling-point resolution (minimum boiling-point difference required for the separation of two nonpolar compounds on a nonpolar column) are reduced relative to more conventional heating rates used with convection-oven instruments. As temperature-programming rates increase, elution temperatures also increase with the result that retention may become insignificant prior to elution. This results in inefficient utilization of the down-stream end of the column and causes a loss in the rate of peak-capacity production. The rate of peak-capacity production is increased by the use of shorter columns and higher carrier gas velocities. With high programming rates (100-600 degrees C/min), column lengths of 6-12 m and average linear carrier gas velocities in the 100-150 cm/s range are satisfactory. In this study, the rate of peak-capacity production, the total peak capacity, and the boiling point resolution are determined for C10-C28 n-alkanes using 6-18 m long columns, 50-200 cm/s average carrier gas velocities, and 60-600 degrees C/min programming rates. It was found that with a 6-meter-long, 0.25-mm i.d. column programmed at a rate of 600 degrees C/min, a maximum peak-capacity production rate of 6.1 peaks/s was obtained. A total peak capacity of about 75 peaks was produced in a 37-s long separation spanning a boiling-point range from n-C10 (174 degrees C) to n-C28 (432 degrees C).

Rapid high-throughput assay to assess scavenging capacity index using DPPH.

Science.gov (United States)

Abderrahim, Fatima; Arribas, Silvia M; Gonzalez, M Carmen; Condezo-Hoyos, Luis

2013-11-15

A new microplate-adapted DPPH rapid assay was developed to assess the antioxidant capacity of pure compounds and foods. The assay was carried out in buffered medium (methanol: 10mmol/l Tris buffer pH 7.5, 1:1 v/v) and reaction was completed at 10min. The scavenging capacity index (SCI), a theoretical antioxidant parameter directly related to the antioxidant capacity of samples, was calculated. SCI for pure compounds: gallic acid (6.76±0.08), quercetin (7.89±0.24), catechin (6.05±0.23), trolox (2.32±0.03), ascorbic acid (2.52±0.15) and gluthatione (1.08±0.08) and foods (μmol DPPH scavenged/100ml): tropical juice (655.62±12.18), mediterraneo juice (702.87±11.13), apple juice (212.52±17.22), pomegranate juice (319.83±9.45), red grape nectar (1093.05±18.69), Don Simon orange juice (632.94±17.22) and date syrup (15992.34±250.7) were comparable to those in previous reports using the classic DPPH assay. The relative standard deviation (RSD) for the SCI on the same and different days was less than 8.12% in all cases. Copyright © 2013 Elsevier Ltd. All rights reserved.

High-capacity NO2 denuder systems operated at various temperatures (298-473 K).

Science.gov (United States)

Wolf, Jan-Christoph; Niessner, Reinhard

2012-12-01

In this study, we investigated several coatings for high-temperature, high-capacity, and high-efficiency denuder-based NO(2) removal, with the scope to face the harsh conditions and requirements of automotive exhaust gas sampling. As first coating, we propose a potassium iodide (KI)/polyethylene glycol coating with a high removal efficiency (ε > 98%) for about 2 h and 50 ppm NO(2) at room temperature (298 K). At elevated temperatures (423 K), the initial capacity (100 ppmh) is decreased to 15 ppmh. Furthermore, this is the first proposal of the ionic liquid methyl-butyl-imidazolium iodide ([BMIm(+)][I(-)]) as denuder coating material. At room temperature, this ionic liquid exhibits far greater capacity (300 ppmh) and NO(2) removal efficiency (ε > 99.9%) than KI. Nevertheless, KI exhibits a slightly (~10%) higher capacity at elevated temperatures than [BMIm(+)][I(-)]. Both coatings presented are suitable for applications requiring selective denuding of NO(2) at temperatures up to 423 K.

Aerobic Capacities of Early College High School Students

Science.gov (United States)

Loflin, Jerry W.

2014-01-01

The Early College High School Initiative (ECHSI) was introduced in 2002. Since 2002, limited data, especially student physical activity data, have been published pertaining to the ECHSI. The purpose of this study was to examine the aerobic capacities of early college students and compare them to state and national averages. Early college students…

High-capacity neutron activation analysis facility

International Nuclear Information System (INIS)

Hochel, R.C.

1979-01-01

A high-capacity neutron activation analysis facility, the Reactor Activation Facility, was designed and built and has been in operation for about a year at one of the Savannah River Plant's production reactors. The facility determines uranium and about 19 other trace elements in hydrogeochemical samples collected in the National Uranium Resource Evaluation program. The facility has a demonstrated average analysis rate of over 10,000 samples per month, and a peak rate of over 16,000 samples per month. Uranium is determined by cyclic activation and delayed neutron counting of the U-235 fission products; other elements are determined from gamma-ray spectra recorded in subsequent irradiation, decay, and counting steps. The method relies on the absolute activation technique and is highly automated for round-the-clock unattended operation

Shear Capacity of Large-Scale RC Beams Affected by ASR

DEFF Research Database (Denmark)

Gustenhoff Hansen, Søren; Barbosa, Ricardo Antonio; Hoang, Linh Cao

2016-01-01

This paper deals with the influence of alkali-silica reaction (ASR) on the shear capacity for concrete slabs without shear reinforcement. An experimental full-scale in-situ program consisting of four slabs from a bridge (Vosnæsvej) has been carried out and the results have been published in ref. [1......) and Eurocode 2 (EN 1992-1-1). The analysis shows that three experiments were highly affected by the preparation of the experimental setup. Only one experiment contained useful information about the shear capacity. The analysis of this experiment shows that the shear capacity is not reduced as much...

Carrying the past to the future: Distinct brain networks underlie individual differences in human spatial working memory capacity.

Science.gov (United States)

Liu, Siwei; Poh, Jia-Hou; Koh, Hui Li; Ng, Kwun Kei; Loke, Yng Miin; Lim, Joseph Kai Wei; Chong, Joanna Su Xian; Zhou, Juan

2018-08-01

Spatial working memory (SWM) relies on the interplay of anatomically separated and interconnected large-scale brain networks. EEG studies often observe load-associated sustained negative activity during SWM retention. Yet, whether and how such sustained negative activity in retention relates to network-specific functional activation/deactivation and relates to individual differences in SWM capacity remain to be elucidated. To cover these gaps, we recorded concurrent EEG-fMRI data in 70 healthy young adults during the Sternberg delayed-match-to-sample SWM task with three memory load levels. To a subset of participants (N = 28) that performed the task properly and had artefact-free fMRI and EEG data, we employed a novel temporo-spatial principal component analysis to derive load-dependent negative slow wave (NSW) from retention-related event-related potentials. The associations between NSW responses with SWM capacity were divergent in the higher (N = 14) and lower (N = 14) SWM capacity groups. Specifically, larger load-related increase in NSW amplitude was associated with greater SWM capacity for the higher capacity group but lower SWM capacity for the lower capacity group. Furthermore, for the higher capacity group, larger NSW amplitude was related to greater activation in bilateral parietal areas of the fronto-parietal network (FPN) and greater deactivation in medial frontal gyrus and posterior mid-cingulate cortex of the default mode network (DMN) during retention. In contrast, the lower capacity group did not show similar pattern. Instead, greater NSW was linked to higher deactivation in right posterior middle temporal gyrus. Our findings shed light on the possible differential EEG-informed neural network mechanism during memory maintenance underlying individual differences in SWM capacity. Copyright © 2018 Elsevier Inc. All rights reserved.

Capacity expansion model of wind power generation based on ELCC

Science.gov (United States)

Yuan, Bo; Zong, Jin; Wu, Shengyu

2018-02-01

Capacity expansion is an indispensable prerequisite for power system planning and construction. A reasonable, efficient and accurate capacity expansion model (CEM) is crucial to power system planning. In most current CEMs, the capacity of wind power generation is considered as boundary conditions instead of decision variables, which may lead to curtailment or over construction of flexible resource, especially at a high renewable energy penetration scenario. This paper proposed a wind power generation capacity value(CV) calculation method based on effective load-carrying capability, and a CEM that co-optimizes wind power generation and conventional power sources. Wind power generation is considered as decision variable in this model, and the model can accurately reflect the uncertainty nature of wind power.

Transgenic cassava lines carrying heterologous alternative oxidase ...

African Journals Online (AJOL)

Afuape

2013-07-03

Jul 3, 2013 ... production of flowers, apomixis (Nassar et al., 2000; ... In order to increase the stress tolerance capacity of ... stress-related procedure due to the activities of auxin ... the evaluation of the transgenic lines for rate of OES .... Some transgenic lines carrying the 35S-AOX fragment amplified using 35S303F1 and.

Recent advances in high-capacity free-space optical and radio-frequency communications using orbital angular momentum multiplexing

Science.gov (United States)

Ren, Yongxiong; Xie, Guodong; Yan, Yan; Li, Long; Zhao, Zhe; Wang, Jian; Tur, Moshe; Molisch, Andreas F.; Ashrafi, Solyman

2017-01-01

There is a continuing growth in the demand for data bandwidth, and the multiplexing of multiple independent data streams has the potential to provide the needed data capacity. One technique uses the spatial domain of an electromagnetic (EM) wave, and space division multiplexing (SDM) has become increasingly important for increased transmission capacity and spectral efficiency of a communication system. A subset of SDM is mode division multiplexing (MDM), in which multiple orthogonal beams each on a different mode can be multiplexed. A potential modal basis set to achieve MDM is to use orbital angular momentum (OAM) of EM waves. In such a system, multiple OAM beams each carrying an independent data stream are multiplexed at the transmitter, propagate through a common medium and are demultiplexed at the receiver. As a result, the total capacity and spectral efficiency of the communication system can be multiplied by a factor equal to the number of transmitted OAM modes. Over the past few years, progress has been made in understanding the advantages and limitations of using multiplexed OAM beams for communication systems. In this review paper, we highlight recent advances in the use of OAM multiplexing for high-capacity free-space optical and millimetre-wave communications. We discuss different technical challenges (e.g. atmospheric turbulence and crosstalk) as well as potential techniques to mitigate such degrading effects. This article is part of the themed issue ‘Optical orbital angular momentum’. PMID:28069770

Future High Capacity Backbone Networks

DEFF Research Database (Denmark)

Wang, Jiayuan

are proposed. The work focuses on energy efficient routing algorithms in a dynamic optical core network environment, with Generalized MultiProtocol Label Switching (GMPLS) as the control plane. Energy ef- ficient routing algorithms for energy savings and CO2 savings are proposed, and their performance...... aiming for reducing the dynamic part of the energy consumption of the network may increase the fixed part of the energy consumption meanwhile. In the second half of the thesis, the conflict between energy efficiency and Quality of Service (QoS) is addressed by introducing a novel software defined......This thesis - Future High Capacity Backbone Networks - deals with the energy efficiency problems associated with the development of future optical networks. In the first half of the thesis, novel approaches for using multiple/single alternative energy sources for improving energy efficiency...

The NASA CSTI High Capacity Power Program

International Nuclear Information System (INIS)

Winter, J.M.

1991-09-01

The SP-100 program was established in 1983 by DOD, DOE, and NASA as a joint program to develop the technology necessary for space nuclear power systems for military and civil applications. During 1986 and 1987, the NASA Advanced Technology Program was responsible for maintaining the momentum of promising technology advancement efforts started during Phase 1 of SP-100 and to strengthen, in key areas, the chances for successful development and growth capability of space nuclear reactor power systems for future space applications. In 1988, the NASA Advanced Technology Program was incorporated into NASA's new Civil Space Technology Initiative (CSTI). The CSTI program was established to provide the foundation for technology development in automation and robotics, information, propulsion, and power. The CSTI High Capacity Power Program builds on the technology efforts of the SP-100 program, incorporates the previous NASA advanced technology project, and provides a bridge to the NASA exploration technology programs. The elements of CSTI high capacity power development include conversion systems: Stirling and thermoelectric, thermal management, power management, system diagnostics, and environmental interactions. Technology advancement in all areas, including materials, is required to provide the growth capability, high reliability, and 7 to 10 year lifetime demanded for future space nuclear power systems. The overall program will develop and demonstrate the technology base required to provide a wide range of modular power systems while minimizing the impact of day/night operations as well as attitudes and distance from the Sun. Significant accomplishments in all of the program elements will be discussed, along with revised goals and project timelines recently developed

Multi-Capacity Load Cell Concept

Directory of Open Access Journals (Sweden)

Seif. M. OSMAN

2014-09-01

Full Text Available Force measuring systems are usually used to calibrate force generated systems, it is not preferable to use load cells to measure forces less than 10 % of its nominal capacity. Several load cells are required to offer calibration facilities at sites to cover different ranges, this lead to difficulties in handling procedures, through the need for several carrying cases to carry this overweight in addition to the over cost of purchasing several load cells. This article concerns with introducing a new concept for designing a multi-capacity load cell as a new force standard in the field of measuring the force. This multi-capacity load cell will replace a set of load cells and reflects economically on the total cost and on easiness of handling procedures.

Mesoporous Silicon-Based Anodes for High Capacity, High Performance Li-ion Batteries, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — A new high capacity anode composite based on mesoporous silicon is proposed. By virtue of a structure that resembles a pseudo one-dimensional phase, the active anode...

The Sensory Components of High-Capacity Iconic Memory and Visual Working Memory

OpenAIRE

Bradley, Claire; Pearson, Joel

2012-01-01

Early visual memory can be split into two primary components: a high-capacity, short-lived iconic memory followed by a limited-capacity visual working memory that can last many seconds. Whereas a large number of studies have investigated visual working memory for low-level sensory features, much research on iconic memory has used more “high-level” alphanumeric stimuli such as letters or numbers. These two forms of memory are typically examined separately, despite an intrinsic overlap in their...

The sensory components of high-capacity iconic memory and visual working memory

OpenAIRE

Claire eBradley; Claire eBradley; Joel ePearson

2012-01-01

Early visual memory can be split into two primary components: a high-capacity, short-lived iconic memory followed by a limited-capacity visual working memory that can last many seconds. Whereas a large number of studies have investigated visual working memory for low-level sensory features, much research on iconic memory has used more high-level alphanumeric stimuli such as letters or numbers. These two forms of memory are typically examined separately, despite an intrinsic overlap in their c...

基于改进AHP的旅游环境承载力评价研究--以鼓浪屿景区为例%Assessment of Tourist Environment Carrying Capacity Based on Improved AHP:a Case Study of Gulangyu Island Scenic Spot

Institute of Scientific and Technical Information of China (English)

贾志涛; 曾繁英

2017-01-01

Tourist environment carrying capacity must be confirmed for protecting the ecological environment, realizing a sustainable de-velopment of sightseeing districts, managing tourist activities in scenic spots effectively, and regulating the development and utilization of tourism resources. The environment carrying capacity data of Gulangyu island on weekdays and holidays is analyzed with improved AHP by establishing an index system for assessing the environmental carrying capacity, combining the natural ecology, social psychology and e-conomic environment carrying capacity. The analysis finds out that the scenic spot should enhance the management of long-term over ca-pacity of tourists, the improvement of the atmosphere purifying capacity, pollutant disposal processing capacity, and the restrictive factors of the psychological bearing capacity of tourists. By doing so, the tourist environment carrying capacity could be promoted with tourist number controlled at an acceptable level, facilitating the sustainable development of Gulangyu island.%为了实现旅游地的生态环境保护及可持续发展目标，有效管理景区游客活动和调控旅游资源的开发利用，必须确定景区的旅游资源环境承载力。通过构建兼顾自然生态环境承载力、社会心理承载力和经济环境承载力三个维度的环境承载力评价指标体系，运用改进的层次分析模型，对景区旅游环境承载力进行量化测算和评价，分析鼓浪屿景区在工作日和节假日的旅游环境承载力数据结果，鼓浪屿景区的可持续发展既需要根据景区旅游环境承载力对当前的长期游客过载现象加强治理，也需要重视大气净化能力、污染物处理能力、游客心理承载力限制性要素的改善以提高景区自身的旅游环境承载力，把景区的旅游数量控制在可接受范围内，推动鼓浪屿景区的持续发展。

High-Capacity, High-Voltage Composite Oxide Cathode Materials

Science.gov (United States)

Hagh, Nader M.

2015-01-01

This SBIR project integrates theoretical and experimental work to enable a new generation of high-capacity, high-voltage cathode materials that will lead to high-performance, robust energy storage systems. At low operating temperatures, commercially available electrode materials for lithium-ion (Li-ion) batteries do not meet energy and power requirements for NASA's planned exploration activities. NEI Corporation, in partnership with the University of California, San Diego, has developed layered composite cathode materials that increase power and energy densities at temperatures as low as 0 degC and considerably reduce the overall volume and weight of battery packs. In Phase I of the project, through innovations in the structure and morphology of composite electrode particles, the partners successfully demonstrated an energy density exceeding 1,000 Wh/kg at 4 V at room temperature. In Phase II, the team enhanced the kinetics of Li-ion transport and electronic conductivity at 0 degC. An important feature of the composite cathode is that it has at least two components that are structurally integrated. The layered material is electrochemically inactive; however, upon structural integration with a spinel material, the layered material can be electrochemically activated and deliver a large amount of energy with stable cycling.

Moisture buffering capacity of highly absorbing materials

Energy Technology Data Exchange (ETDEWEB)

Cerolini, S.; D' Orazio, M.; Stazi, A. [Department of Architecture, Construction and Structures (DACS), Faculty of Engineering, Polytechnic University of Marche, Via Brecce Bianche, 60100 Ancona (Italy); Di Perna, C. [Department of Energetics, Faculty of Engineering, Polytechnic University of Marche, Via Brecce Bianche, 60100 Ancona (Italy)

2009-02-15

This research investigates the possibility to use highly absorbing materials to dampen indoor RH% variations. The practical MBV of sodium polyacrylate, cellulose-based material, perlite and gypsum is evaluated for a daily cyclic exposure that alternates high (75%) and low (33%) RH% levels for 8 h and 16 h, respectively. The adjustment velocity to RH% variations and the presence of hysteretic phenomena are also presented. The cellulose-based material proves to be the most suitable for moisture buffering applications. Starting from this material's properties, the effect of thickness, vapour resistance factor ({mu}) and mass surface exchange coefficient (Z{sub v}) on sorption capacity is evaluated by the use of a numerical model. (author)

Targeted Drug-Carrying Bacteriophages as Antibacterial Nanomedicines▿

Science.gov (United States)

Yacoby, Iftach; Bar, Hagit; Benhar, Itai

2007-01-01

While the resistance of bacteria to traditional antibiotics is a major public health concern, the use of extremely potent antibacterial agents is limited by their lack of selectivity. As in cancer therapy, antibacterial targeted therapy could provide an opportunity to reintroduce toxic substances to the antibacterial arsenal. A desirable targeted antibacterial agent should combine binding specificity, a large drug payload per binding event, and a programmed drug release mechanism. Recently, we presented a novel application of filamentous bacteriophages as targeted drug carriers that could partially inhibit the growth of Staphylococcus aureus bacteria. This partial success was due to limitations of drug-loading capacity that resulted from the hydrophobicity of the drug. Here we present a novel drug conjugation chemistry which is based on connecting hydrophobic drugs to the phage via aminoglycoside antibiotics that serve as solubility-enhancing branched linkers. This new formulation allowed a significantly larger drug-carrying capacity of the phages, resulting in a drastic improvement in their performance as targeted drug-carrying nanoparticles. As an example for a potential systemic use for potent agents that are limited for topical use, we present antibody-targeted phage nanoparticles that carry a large payload of the hemolytic antibiotic chloramphenicol connected through the aminoglycoside neomycin. We demonstrate complete growth inhibition toward the pathogens Staphylococcus aureus, Streptococcus pyogenes, and Escherichia coli with an improvement in potency by a factor of ∼20,000 compared to the free drug. PMID:17404004

High-capacity, selective solid sequestrants for innovative chemical separation: Inorganic ion exchange approach

International Nuclear Information System (INIS)

Bray, L.

1995-01-01

The approach of this task is to develop high-capacity, selective solid inorganic ion exchangers for the recovery of cesium and strontium from nuclear alkaline and acid wastes. To achieve this goal, Pacific Northwest Laboratories (PNL) is collaborating with industry and university participants to develop high capacity, selective, solid ion exchangers for the removal of specific contaminants from nuclear waste streams

Superposed Redox Chemistry of Fused Carbon Rings in Cyclooctatetraene-Based Organic Molecules for High-Voltage and High-Capacity Cathodes.

Science.gov (United States)

Zhao, Xiaolin; Qiu, Wujie; Ma, Chao; Zhao, Yingqin; Wang, Kaixue; Zhang, Wenqing; Kang, Litao; Liu, Jianjun

2018-01-24

Even though many organic cathodes have been developed and have made a significant improvement in energy density and reversibility, some organic materials always generate relatively low voltage and limited discharge capacity because their energy storage mechanism is solely based on redox reactions of limited functional groups [N-O, C═X (X = O, N, S)] linking to aromatic rings. Here, a series of cyclooctatetraene-based (C 8 H 8 ) organic molecules were demonstrated to have electrochemical activity of high-capacity and high-voltage from carbon rings by means of first-principles calculations and electronic structure analysis. Fused molecules of C 8 -C 4 -C 8 (C 16 H 12 ) and C 8 -C 4 -C 8 -C 4 -C 8 (C 24 H 16 ) contain, respectively, four and eight electron-deficient carbons, generating high-capacity by their multiple redox reactions. Our sodiation calculations predict that C 16 H 12 and C 24 H 16 exhibit discharge capacities of 525.3 and 357.2 mA h g -1 at the voltage change from 3.5 to 1.0 V and 3.7 to 1.3 V versus Na + /Na, respectively. Electronic structure analysis reveals that the high voltages are attributed to superposed electron stabilization mechanisms, including double-bond reformation and aromatization from carbon rings. High thermodynamic stability of these C 24 H 16 -based systems strongly suggests feasibility of experimental realization. The present work provides evidence that cyclooctatetraene-based organic molecules fused with the C 4 ring are promising in designing high-capacity and high-voltage organic rechargeable cathodes.

46 CFR 153.488 - Design and equipment for tanks carrying high melting point NLSs: Category B.

Science.gov (United States)

2010-10-01

... (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS... equipment for tanks carrying high melting point NLSs: Category B. Unless waived under § 153.491, for a ship to have its Certificate of Inspection or Certificate of Compliance endorsed allowing a tank to carry...

High current capacity electrical connector

International Nuclear Information System (INIS)

Bettis, E.S.; Watts, H.L.

1976-01-01

An electrical connector is provided for coupling high current capacity electrical conductors such as copper busses or the like. The connector is arranged in a ''sandwiched'' configuration in which a conductor plate contacts the busses along major surfaces clamped between two stainless steel backing plates. The conductor plate is provided with contact buttons in a spaced array such that the caps of the buttons extend above the conductor plate surface to contact the busses. When clamping bolts provided through openings in the sandwiched arrangement are tightened, Belleville springs provided under the rim of each button cap are compressed and resiliently force the caps into contact with the busses' contacting surfaces to maintain a predetermined electrical contact area provided by the button cap tops. The contact area does not change with changing thermal or mechanical stresses applied to the coupled conductors

High-capacity neutron activation analysis facility

International Nuclear Information System (INIS)

Hochel, R.C.; Bowman, W.W.; Zeh, C.W.

1980-01-01

A high-capacity neutron activation analysis facility, the Reactor Activation Facility, was designed and built and has been in operation for about a year at one of the Savannah River Plant's production reactors. The facility determines uranium and about 19 other elements in hydrogeochemical samples collected in the National Uranium Resource Evaluation program, which is sponsored and funded by the United States Department of Energy, Grand Junction Office. The facility has a demonstrated average analysis rate of over 10,000 samples per month, and a peak rate of over 16,000 samples per month. Uranium is determined by cyclic activation and delayed neutron counting of the U-235 fission products; other elements are determined from gamma-ray spectra recorded in subsequent irradiation, decay, and counting steps. The method relies on the absolute activation technique and is highly automated for round-the-clock unattended operation

The study of carrying capacity of timber slabs with use the finite elements method

Directory of Open Access Journals (Sweden)

Demeshok Vitalii

2017-01-01

Full Text Available In the article, the results of the study of behavior of timber slab under influence of fire with the standard “time-temperature” curve are presented. The finite element method was used for it. For the calculation we constructed a grid models of timber slabs. As a result of solution of the thermal problem was obtained temperature distribution and the graphs of maximum deflection of timber slabs and its slew rate depending on the time of the test. The obtained graphs allow to obtain data on the occurrence of the limit state of loss of bearing capacity by comparing current values of displacements and velocities with the maximum allowable. Analysis of the graphs shows that the criteria limit state of loss of bearing capacity does not occur. Calculation method of evaluating the fire resistance of timber slabs was developed. For it use database about strain-stress state of this slabs in conditions of influence of the fire.

Three-dimensional carbon network confined antimony nanoparticle anodes for high-capacity K-ion batteries.

Science.gov (United States)

Han, Chunhua; Han, Kang; Wang, Xuanpeng; Wang, Chenyang; Li, Qi; Meng, Jiashen; Xu, Xiaoming; He, Qiu; Luo, Wen; Wu, Liming; Mai, Liqiang

2018-04-19

Antimony (Sb) represents a promising anode for K-ion batteries (KIBs) due to its high theoretical capacity and suitable working voltage. However, the large volume change that occurs in the potassiation/depotassiation process can lead to severe capacity fading. Herein, we report a high-capacity anode material by in situ confining Sb nanoparticles in a three-dimensional carbon framework (3D SbNPs@C) via a template-assisted freeze-drying treatment and subsequent carbothermic reduction. The as-prepared 3D SbNPs@C hybrid material delivers high reversible capacity and good cycling stability when used as the anode for KIBs. Furthermore, cyclic voltammetry and in situ X-ray diffraction analysis were performed to reveal the intrinsic mechanism of a K-Sb alloying reaction. Therefore, this work is of great importance to understand the electrochemical process of the Sb-based alloying reaction and will pave the way for the exploration of high performance KIB anode materials.

High Capacity Radio over Fiber Transmission Links

DEFF Research Database (Denmark)

Caballero Jambrina, Antonio

. This achievement has satisfied the requirements on transmission robustness and high capacity of next generation hybrid optical fibre-wireless networks. One important contribution of this thesis is the novel concept of photonic downconversion with free-running pulsed laser source for phase modulated Radio-over-Fiber......This thesis expands the state-of-the-art on the detection of high speed wireless signals using optics. Signal detection at speeds over 1 Gbps at carrier Radio Frequency (RF) ranging from 5 GHz to 100 GHz have been achieved by applying novel concepts on optical digital coherent receivers......-wave frequencies at carrier frequencies exceeding 60 GHz, using photonic baseband technologies. For signal generation, high spectral-efficient optical modulation technologies are used together with optical heterodyning. In the detection side, the mm-wave signal is modulated in the optical domain and received using...

Hollow Carbon Nanofiber-Encapsulated Sulfur Cathodes for High Specific Capacity Rechargeable Lithium Batteries

KAUST Repository

Zheng, Guangyuan; Yang, Yuan; Cha, Judy J.; Hong, Seung Sae; Cui, Yi

2011-01-01

Sulfur has a high specific capacity of 1673 mAh/g as lithium battery cathodes, but its rapid capacity fading due to polysulfides dissolution presents a significant challenge for practical applications. Here we report a hollow carbon nanofiber

Improvements on high voltage capacity and high temperature performances of Si-based Schottky potential barrier diode

International Nuclear Information System (INIS)

Wang Yongshun; Rui Li; Adnan Ghaffar; Wang Zaixing; Liu Chunjuan

2015-01-01

In order to improve the reverse voltage capacity and low junction temperature characteristics of the traditional silicon-based Schottky diode, a Schottky diode with high reverse voltage capacity and high junction temperature was fabricated using ion implantation, NiPt60 sputtering, silicide-forming and other major technologies on an N-type silicon epitaxial layer of 10.6–11.4 μm and (2.2–2.4) × 10 15 cm −3 doping concentration. The measurement results show that the junction temperature of the Schottky diode fabricated can reach 175 °C, that is 50 °C higher than that of the traditional one; the reverse voltage capacity V R can reach 112 V, that is 80 V higher than that of the traditional one; the leakage current is only 2 μA and the forward conduction voltage drop is V F = 0.71 V at forward current I F = 3 A. (semiconductor devices)

Research on Associated Action between Tourism Industrial Agglomeration Development and Carrying Capacity Ascension in China′s Coastal Regions%我国沿海旅游产业集聚发展与承载力提升关联作用研究

Institute of Scientific and Technical Information of China (English)

刘佳; 王娟

2016-01-01

在剖析旅游产业集聚与旅游环境承载力关联作用的基础上，对沿海地区旅游产业集聚程度及旅游环境承载力综合指数进行测度，揭示二者的动态变化与空间差异特征；进而对2001－2012年承载能力与集聚程度指数的时间序列数据进行计量检验，构建两个变量的向量自回归模型（ VAR），分析沿海地区旅游产业集聚程度与旅游环境承载力水平之间的动态效应关系。研究表明：旅游产业集聚与旅游环境承载力存在长期稳定的相关性；从二者动态关系变化上看，在特定空间和时间范围内的旅游环境承载力对旅游产业集聚发展产生了限制作用和负向影响；随着规模效应、成本效应与竞争优势的发挥，旅游产业集聚会推动区域旅游环境承载水平的提升，承载力对集聚的影响转化为正向影响；同时旅游产业集聚对旅游环境承载力变化的贡献水平远大于旅游环境承载力对集聚变化的贡献水平。%On the basis of analyzing related mechanism of tourism industrial agglomeration and carrying capacity, the pa-per measures tourism industrial concentration degree and tourism environment carrying capacity index in coastal regions to reveal the characteristics of dynamic change and space difference between them;then it tests the time series data of carry-ing capacity and concentration degree index from 2001 to 2012 and builds vector auto-regressive model ( VAR) to ana-lyze the dynamic effect between tourism industrial concentration degree and tourism environment carrying capacity index in coastal regions.The results show that:there is long-term stable relationship between them;carrying capacity has neg-ative impact on tourism industry agglomeration, but it will be transformed into positive influence alongside regional tourism carrying capacity ascension by the scale effect, cost effect and competitive advantage;the industry agglomeration�

Hollow Carbon Nanofiber-Encapsulated Sulfur Cathodes for High Specific Capacity Rechargeable Lithium Batteries

KAUST Repository

Zheng, Guangyuan

2011-10-12

Sulfur has a high specific capacity of 1673 mAh/g as lithium battery cathodes, but its rapid capacity fading due to polysulfides dissolution presents a significant challenge for practical applications. Here we report a hollow carbon nanofiber-encapsulated sulfur cathode for effective trapping of polysulfides and demonstrate experimentally high specific capacity and excellent electrochemical cycling of the cells. The hollow carbon nanofiber arrays were fabricated using anodic aluminum oxide (AAO) templates, through thermal carbonization of polystyrene. The AAO template also facilitates sulfur infusion into the hollow fibers and prevents sulfur from coating onto the exterior carbon wall. The high aspect ratio of the carbon nanofibers provides an ideal structure for trapping polysulfides, and the thin carbon wall allows rapid transport of lithium ions. The small dimension of these nanofibers provides a large surface area per unit mass for Li2S deposition during cycling and reduces pulverization of electrode materials due to volumetric expansion. A high specific capacity of about 730 mAh/g was observed at C/5 rate after 150 cycles of charge/discharge. The introduction of LiNO3 additive to the electrolyte was shown to improve the Coulombic efficiency to over 99% at C/5. The results show that the hollow carbon nanofiber-encapsulated sulfur structure could be a promising cathode design for rechargeable Li/S batteries with high specific energy. © 2011 American Chemical Society.

Research on Forewarning System of Tourism Carrying Capacity in Pingtan Island Based on Fuzzy Comprehensive Evaluation%基于模糊综合评价的海岛旅游环境承载力预警研究

Institute of Scientific and Technical Information of China (English)

戴丽芳; 丁丽英

2012-01-01

以旅游环境承栽力预警相关理论为指导，采用定性和定量相结合的方法，建立旅游环境承栽力综合评价指标体系，并以平潭海岛为个案进行实证研究．结果表明：平潭旅游环境承栽力总体处于轻度超栽状态，为实现平潭旅游的可持续发展，提出了平潭旅游今后发展的重点方向．%This paper is using the process of qualitative and quantitative combination to build the tourism carrying capacity assessment criteria system under the guidance of the forewarning system of the tourism carrying capacity and based on the empirical research of Pingtan Island. The results show that. the overall tourism carrying capacity in Pingtan is slightly overloaded. In order to achieve the sustainable development of tourism in Pingtan,the paper presents key directions of its furture development.

Development of high-capacity antimatter storage

International Nuclear Information System (INIS)

Howe, Steven D.; Smith, Gerald A.

2000-01-01

Space is vast. Over the next few decades, humanity will strive to send probes farther and farther into space to establish long baselines for interferometry, to visit the Kuiper Belt, to identify the heliopause, or to map the Oort cloud. In order to solve many of the mysteries of the universe or to explore the solar system and beyond, one single technology must be developed--high performance propulsion. In essence, future missions to deep space will require specific impulses between 50,000 and 200,000 seconds and energy densities greater than 10 14 j/kg in order to accomplish the mission within the career lifetime of an individual, 40 years. Only two technologies available to mankind offer such performance--fusion and antimatter. Currently envisioned fusion systems are too massive. Alternatively, because of the high energy density, antimatter powered systems may be relatively compact. The single key technology that is required to enable the revolutionary concept of antimatter propulsion is safe, reliable, high-density storage. Under a grant from the NASA Institute of Advanced Concepts, we have identified two potential mechanisms that may enable high capacity antimatter storage systems to be built. We will describe planned experiments to verify the concepts. Development of a system capable of storing megajoules per gram will allow highly instrumented platforms to make fast missions to great distances. Such a development will open the universe to humanity

The Decline of Soil Infiltration Capacity Due To High Elevation Groundwater

OpenAIRE

Isri Ronald Mangangka

2008-01-01

Infiltration capacity of soil mainly depends on two factors; the particle size and the moisture content of the soil. Groundwater increases the soil moisture, not only below the water table but also within the capillary zone, above the water table. Field experiment in a high groundwater area was conducted to understand the relationship among the groundwater, soil moisture and infiltration capacity. Using a single ring infiltrometer, the effect of groundwater in the infiltration rate was observ...

Standards for the Estimation of Tourism Carrying Capacity of Countryside Wetland Parks%郊野湿地公园旅游环境容量测算标准构建

Institute of Scientific and Technical Information of China (English)

张桦; 储九志

2013-01-01

Based on differences among geographic locations, Wetland Parks were divided into 3 types of city, suburban and countryside. A special function of the countryside wetland parks is tourism support. By reviewing the first batch of National Wetland Parks and taking into account of results from relevant studies, an indicators system for the tourism capacity of countryside wetland parks was developed. Standards for estimating the tourism carrying capacity was developed by integrating other relevant standards through questionnaires. The standards covers carrying capacities in 5 major aspects: ecology, resources, psychological, facilities and management capacity, including a total of 18 elements. The standards provided a good foundation for further studies.%基于地理位置差异将湿地公园分为城市、城郊与郊野3类,探讨郊野湿地公园承担旅游功能所具有的特殊性,通过对首批国家湿地公园的梳理,结合相关研究成果,提出郊野湿地公园旅游环境容量测算的指标体系,在此基础上采用相关标准指标,通过问卷调研等方法构建其测算标准.测算标准包括旅游环境容量中的生态、资源、心理、设施及管理5大容量,共计18项因子,为其测算研究提供良好基础.

Research on the Food Security Condition and Food Supply Capacity of Egypt

Directory of Open Access Journals (Sweden)

Jian Deng

2014-01-01

Full Text Available Food security is chronically guaranteed in Egypt because of the food subsidy policy of the country. However, the increasing Egyptian population is straining the food supply. To study changes in Egyptian food security and future food supply capacity, we analysed the historical grain production, yield per unit, grain-cultivated area, and per capita grain possession of Egypt. The GM (1,1 model of the grey system was used to predict the future population. Thereafter, the result was combined with scenario analysis to forecast the grain possession and population carrying capacity of Egypt under different scenarios. Results show that the increasing population and limitations in cultivated land will strain Egyptian food security. Only in high cultivated areas and high grain yield scenarios before 2020, or in high cultivated areas and mid grain yield scenarios before 2015, can food supply be basically satisfied (assurance rate ≥ 80% under a standard of 400 kg per capita. Population carrying capacity in 2030 is between 51.45 and 89.35 million. Thus, we propose the use of advanced technologies in agriculture and the adjustment of plant structure and cropping systems to improve land utilization efficiency. Furthermore, urbanization and other uses of cultivated land should be strictly controlled to ensure the planting of grains.

Research on the food security condition and food supply capacity of Egypt.

Science.gov (United States)

Deng, Jian; Xiang, Youzhen; Hao, Wenhui; Feng, Yongzhong; Yang, Gaihe; Ren, Guangxin; Han, Xinhui

2014-01-01

Food security is chronically guaranteed in Egypt because of the food subsidy policy of the country. However, the increasing Egyptian population is straining the food supply. To study changes in Egyptian food security and future food supply capacity, we analysed the historical grain production, yield per unit, grain-cultivated area, and per capita grain possession of Egypt. The GM (1,1) model of the grey system was used to predict the future population. Thereafter, the result was combined with scenario analysis to forecast the grain possession and population carrying capacity of Egypt under different scenarios. Results show that the increasing population and limitations in cultivated land will strain Egyptian food security. Only in high cultivated areas and high grain yield scenarios before 2020, or in high cultivated areas and mid grain yield scenarios before 2015, can food supply be basically satisfied (assurance rate ≥ 80%) under a standard of 400 kg per capita. Population carrying capacity in 2030 is between 51.45 and 89.35 million. Thus, we propose the use of advanced technologies in agriculture and the adjustment of plant structure and cropping systems to improve land utilization efficiency. Furthermore, urbanization and other uses of cultivated land should be strictly controlled to ensure the planting of grains.

Beyond the magic number four: Remapping high-capacity, pre-attentive, fragile working memory

NARCIS (Netherlands)

Zerr, P.; Gayet, S.; Mulder, K.T.; Sligte, I.G.; Stigchel, S. van der

2017-01-01

Visual short term memory allows us to access visual information after termination of its retinal input. Generally, a distinction is made between a robust, capacity-limited form (working memory, WM) and high-capacity, pre-attentive, maskable forms (sensory memory, e.g. fragile memory, FM). Eye

High-Capacity Spacesuit Evaporator Absorber Radiator (SEAR)

Science.gov (United States)

Izenson, Michael G.; Chen, Weibo; Phillips, Scott; Chepko, Ariane; Bue, Grant; Quinn, Gregory

2015-01-01

Future human space exploration missions will require advanced life support technology that can operate across a wide range of applications and environments. Thermal control systems for space suits and spacecraft will need to meet critical requirements for water conservation and multifunctional operation. This paper describes a Space Evaporator Absorber Radiator (SEAR) that has been designed to meet performance requirements for future life support systems. A SEAR system comprises a lithium chloride absorber radiator (LCAR) for heat rejection coupled with a space water membrane evaporator (SWME) for heat acquisition. SEAR systems provide heat pumping to minimize radiator size, thermal storage to accommodate variable environmental conditions, and water absorption to minimize use of expendables. We have built and tested a flight-like, high-capacity LCAR, demonstrated its performance in thermal vacuum tests, and explored the feasibility of an ISS demonstration test of a SEAR system. The new LCAR design provides the same cooling capability as prior LCAR prototypes while enabling over 30% more heat absorbing capacity. Studies show that it should be feasible to demonstrate SEAR operation in flight by coupling with an existing EMU on the space station.

Preparation and characterization of magnetic polymer nanospheres with high protein binding capacity

International Nuclear Information System (INIS)

Liu Xianqiao; Guan Yueping; Liu Huizhou; Ma Zhiya; Yang Yu; Wu Xiaobing

2005-01-01

A novel magnetic support with high protein binding capacity was prepared by mini-emulsion polymerization. The magnetic poly(methacrylate-divinylbenzene) nanospheres prepared are 390 nm in diameter with narrow size distribution and star-like external morphology which leads to a large increase in specific surface area. Experimental results indicate that the maximum protein binding capacity is 316 mg bovine hemoglobin (BHb)/g support

The sensory components of high-capacity iconic memory and visual working memory.

Science.gov (United States)

Bradley, Claire; Pearson, Joel

2012-01-01

EARLY VISUAL MEMORY CAN BE SPLIT INTO TWO PRIMARY COMPONENTS: a high-capacity, short-lived iconic memory followed by a limited-capacity visual working memory that can last many seconds. Whereas a large number of studies have investigated visual working memory for low-level sensory features, much research on iconic memory has used more "high-level" alphanumeric stimuli such as letters or numbers. These two forms of memory are typically examined separately, despite an intrinsic overlap in their characteristics. Here, we used a purely sensory paradigm to examine visual short-term memory for 10 homogeneous items of three different visual features (color, orientation and motion) across a range of durations from 0 to 6 s. We found that the amount of information stored in iconic memory is smaller for motion than for color or orientation. Performance declined exponentially with longer storage durations and reached chance levels after ∼2 s. Further experiments showed that performance for the 10 items at 1 s was contingent on unperturbed attentional resources. In addition, for orientation stimuli, performance was contingent on the location of stimuli in the visual field, especially for short cue delays. Overall, our results suggest a smooth transition between an automatic, high-capacity, feature-specific sensory-iconic memory, and an effortful "lower-capacity" visual working memory.

A high-resolution programmable Vernier delay generator based on carry chains in FPGA.

Science.gov (United States)

Cui, Ke; Li, Xiangyu; Zhu, Rihong

2017-06-01

This paper presents an architecture of a high-resolution delay generator implemented in a single field programmable gate array chip by exploiting the method of utilizing dedicated carry chains. It serves as the core component in various physical instruments. The proposed delay generator contains the coarse delay step and the fine delay step to guarantee both large dynamic range and high resolution. The carry chains are organized in the Vernier delay loop style to fulfill the fine delay step with high precision and high linearity. The delay generator was implemented in the EP3SE110F1152I3 Stratix III device from Altera on a self-designed test board. Test results show that the obtained resolution is 38.6 ps, and the differential nonlinearity/integral nonlinearity is in the range of [-0.18 least significant bit (LSB), 0.24 LSB]/(-0.02 LSB, 0.01 LSB) under the nominal supply voltage of 1100 mV and environmental temperature of 20  ° C. The delay generator is rather efficient concerning resource cost, which uses only 668 look-up tables and 146 registers in total.

A high-resolution programmable Vernier delay generator based on carry chains in FPGA

Science.gov (United States)

Cui, Ke; Li, Xiangyu; Zhu, Rihong

2017-06-01

This paper presents an architecture of a high-resolution delay generator implemented in a single field programmable gate array chip by exploiting the method of utilizing dedicated carry chains. It serves as the core component in various physical instruments. The proposed delay generator contains the coarse delay step and the fine delay step to guarantee both large dynamic range and high resolution. The carry chains are organized in the Vernier delay loop style to fulfill the fine delay step with high precision and high linearity. The delay generator was implemented in the EP3SE110F1152I3 Stratix III device from Altera on a self-designed test board. Test results show that the obtained resolution is 38.6 ps, and the differential nonlinearity/integral nonlinearity is in the range of [-0.18 least significant bit (LSB), 0.24 LSB]/(-0.02 LSB, 0.01 LSB) under the nominal supply voltage of 1100 mV and environmental temperature of 2 0°C. The delay generator is rather efficient concerning resource cost, which uses only 668 look-up tables and 146 registers in total.

The NASA CSTI High Capacity Power Project

International Nuclear Information System (INIS)

Winter, J.; Dudenhoefer, J.; Juhasz, A.; Schwarze, G.; Patterson, R.; Ferguson, D.; Schmitz, P.; Vandersande, J.

1992-01-01

This paper describes the elements of NASA's CSTI High Capacity Power Project which include Systems Analysis, Stirling Power Conversion, Thermoelectric Power Conversion, Thermal Management, Power Management, Systems Diagnostics, Environmental Interactions, and Material/Structural Development. Technology advancement in all elements is required to provide the growth capability, high reliability and 7 to 10 year lifetime demanded for future space nuclear power systems. The overall project will develop and demonstrate the technology base required to provide a wide range of modular power systems compatible with the SP-100 reactor which facilitates operation during lunar and planetary day/night cycles as well as allowing spacecraft operation at any attitude or distance from the sun. Significant accomplishments in all of the project elements will be presented, along with revised goals and project timeliness recently developed

Curtailment in a Highly Renewable Power System and Its Effect on Capacity Factors

Directory of Open Access Journals (Sweden)

Alexander Kies

2016-06-01

Full Text Available The capacity factor of a power plant is the ratio of generation over its potential generation. It is an important measure to describe wind and solar resources. However, the fluctuating nature of renewable power generation makes it difficult to integrate all generation at times. Whenever generation exceeds the load, curtailment or storage of energy is required. With increasing renewable shares in the power system, the level of curtailment will further increase. In this work, the influence of the curtailment on the capacity factors for a highly renewable German power system is studied. An effective capacity factor is introduced, and the implications for the distribution of renewable power plants are discussed. Three years of highly-resolved weather data were used to model wind and solar power generation. Together with historical load data and a transmission model, a possible future German power system was simulated. It is shown that effective capacity factors for unlimited transmission are strongly reduced by up to 60% (wind and 70% (photovoltaics and therefore of limited value in a highly renewable power system. Furthermore, the results demonstrate that wind power benefits more strongly from a reinforced transmission grid than photovoltaics (PV does.

Electrical capacity and resistance determination of emitting electric transducer

International Nuclear Information System (INIS)

Alba Fernandez, J.; Ramis Soriano, J.

2000-01-01

In this work we calculate the electrical resistance and capacity of emitting electric transducer, which is mainly formed, in direct relationship with its properties, by a ceramic capacitor. Our aim is to motivate the students with an attractive element in order to carry out traditional measurements of the charge and discharge transients of a capacitor, implementing high resistance setups. (Author) 5 refs

The carrying capacity and the effects of protection level in three marine protected areas in the Balearic Islands (NW Mediterranean

Directory of Open Access Journals (Sweden)

Josep Coll

2012-08-01

Full Text Available The monitoring of fisheries target species in three marine protected areas (MPAs located in the NW Mediterranean provided important conclusions on management effects. The abundance, occurrence and biomass of large fish showed consistent and growing trends inside the MPAs. Fish diversity was also favoured by protection. Nevertheless, spatial variance of these indicators at a medium scale was often of the same order as that caused by time between different protection levels. The carrying capacity was determined for the first time in western Mediterranean MPAs in five out of six sites studied, and in all cases it was achieved within the first five years of protection. The observed values indicate that the system of the studied MPAs is representative of the general coastal environment of the Balearic Islands, but is far from the potential of other MPAs which are considered as hot spots in other localities. Likewise, this study shows that partially protected areas can also be fairly effective if their habitats fit with those required by target species and fishing modalities are suitably regulated or banned.

Carbon−Silicon Core−Shell Nanowires as High Capacity Electrode for Lithium Ion Batteries

KAUST Repository

Cui, Li-Feng

2009-09-09

We introduce a novel design of carbon-silicon core-shell nanowires for high power and long life lithium battery electrodes. Amorphous silicon was coated onto carbon nanofibers to form a core-shell structure and the resulted core-shell nanowires showed great performance as anode material. Since carbon has a much smaller capacity compared to silicon, the carbon core experiences less structural stress or damage during lithium cycling and can function as a mechanical support and an efficient electron conducting pathway. These nanowires have a high charge storage capacity of ∼2000 mAh/g and good cycling life. They also have a high Coulmbic efficiency of 90% for the first cycle and 98-99.6% for the following cycles. A full cell composed of LiCoO2 cathode and carbon-silicon core-shell nanowire anode is also demonstrated. Significantly, using these core-shell nanowires we have obtained high mass loading and an area capacity of ∼4 mAh/cm2, which is comparable to commercial battery values. © 2009 American Chemical Society.

Improved Performance and Safety for High Energy Batteries Through Use of Hazard Anticipation and Capacity Prediction

Science.gov (United States)

Atwater, Terrill

1993-01-01

Prediction of the capacity remaining in used high rate, high energy batteries is important information to the user. Knowledge of the capacity remaining in used batteries results in better utilization. This translates into improved readiness and cost savings due to complete, efficient use. High rate batteries, due to their chemical nature, are highly sensitive to misuse (i.e., over discharge or very high rate discharge). Battery failure due to misuse or manufacturing defects could be disastrous. Since high rate, high energy batteries are expensive and energetic, a reliable method of predicting both failures and remaining energy has been actively sought. Due to concerns over safety, the behavior of lithium/sulphur dioxide cells at different temperatures and current drains was examined. The main thrust of this effort was to determine failure conditions for incorporation in hazard anticipation circuitry. In addition, capacity prediction formulas have been developed from test data. A process that performs continuous, real-time hazard anticipation and capacity prediction was developed. The introduction of this process into microchip technology will enable the production of reliable, safe, and efficient high energy batteries.

On-demand high-capacity ride-sharing via dynamic trip-vehicle assignment.

Science.gov (United States)

Alonso-Mora, Javier; Samaranayake, Samitha; Wallar, Alex; Frazzoli, Emilio; Rus, Daniela

2017-01-17

Ride-sharing services are transforming urban mobility by providing timely and convenient transportation to anybody, anywhere, and anytime. These services present enormous potential for positive societal impacts with respect to pollution, energy consumption, congestion, etc. Current mathematical models, however, do not fully address the potential of ride-sharing. Recently, a large-scale study highlighted some of the benefits of car pooling but was limited to static routes with two riders per vehicle (optimally) or three (with heuristics). We present a more general mathematical model for real-time high-capacity ride-sharing that (i) scales to large numbers of passengers and trips and (ii) dynamically generates optimal routes with respect to online demand and vehicle locations. The algorithm starts from a greedy assignment and improves it through a constrained optimization, quickly returning solutions of good quality and converging to the optimal assignment over time. We quantify experimentally the tradeoff between fleet size, capacity, waiting time, travel delay, and operational costs for low- to medium-capacity vehicles, such as taxis and van shuttles. The algorithm is validated with ∼3 million rides extracted from the New York City taxicab public dataset. Our experimental study considers ride-sharing with rider capacity of up to 10 simultaneous passengers per vehicle. The algorithm applies to fleets of autonomous vehicles and also incorporates rebalancing of idling vehicles to areas of high demand. This framework is general and can be used for many real-time multivehicle, multitask assignment problems.

A Low Cost, High Capacity Regenerable Sorbent for Pre-combustion CO{sub 2} Capture

Energy Technology Data Exchange (ETDEWEB)

Alptekin, Gokhan

2012-09-30

The overall objective of the proposed research is to develop a low cost, high capacity CO{sub 2} sorbent and demonstrate its technical and economic viability for pre-combustion CO{sub 2} capture. The specific objectives supporting our research plan were to optimize the chemical structure and physical properties of the sorbent, scale-up its production using high throughput manufacturing equipment and bulk raw materials and then evaluate its performance, first in bench-scale experiments and then in slipstream tests using actual coal-derived synthesis gas. One of the objectives of the laboratory-scale evaluations was to demonstrate the life and durability of the sorbent for over 10,000 cycles and to assess the impact of contaminants (such as sulfur) on its performance. In the field tests, our objective was to demonstrate the operation of the sorbent using actual coal-derived synthesis gas streams generated by air-blown and oxygen-blown commercial and pilot-scale coal gasifiers (the CO{sub 2} partial pressure in these gas streams is significantly different, which directly impacts the operating conditions hence the performance of the sorbent). To support the field demonstration work, TDA collaborated with Phillips 66 and Southern Company to carry out two separate field tests using actual coal-derived synthesis gas at the Wabash River IGCC Power Plant in Terre Haute, IN and the National Carbon Capture Center (NCCC) in Wilsonville, AL. In collaboration with the University of California, Irvine (UCI), a detailed engineering and economic analysis for the new CO{sub 2} capture system was also proposed to be carried out using Aspen PlusTM simulation software, and estimate its effect on the plant efficiency.

E- and W-band high-capacity hybrid fiber-wireless link

DEFF Research Database (Denmark)

Vegas Olmos, Juan José; Pang, Xiaodan; Tafur Monroy, Idelfonso

2014-01-01

In this paper we summarize the work conducted in our group in the area of E- and W-band optical high-capacity fiber-wireless links. We present performance evaluations of E- and W-band mm-wave signal generation using photonic frequency upconversion employing both VCSELs and ECLs, along with transm...... in mobile backhaul/fronthaul applications, dense distributed antenna systems and fiber-over-radio scenarios.......In this paper we summarize the work conducted in our group in the area of E- and W-band optical high-capacity fiber-wireless links. We present performance evaluations of E- and W-band mm-wave signal generation using photonic frequency upconversion employing both VCSELs and ECLs, along...... with transmission over different type of optical fibers and for a number of values for the wireless link distance. Hybrid wireless-optical links can be composed of mature and resilient technology available off-the-shelf, and provide functionalities that can add value to optical access networks, specifically...

An Insect Herbivore Microbiome with High Plant Biomass-Degrading Capacity

Energy Technology Data Exchange (ETDEWEB)

Suen, Garret; Barry, Kerrie; Goodwin, Lynne; Scott, Jarrod; Aylward, Frank; Adams, Sandra; Pinto-Tomas, Adrian; Foster, Clifton; Pauly, Markus; Weimer, Paul; Bouffard, Pascal; Li, Lewyn; Osterberger, Jolene; Harkins, Timothy; Slater, Steven; Donohue, Timothy; Currie, Cameron; Tringe, Susannah G.

2010-09-23

Herbivores can gain indirect access to recalcitrant carbon present in plant cell walls through symbiotic associations with lignocellulolytic microbes. A paradigmatic example is the leaf-cutter ant (Tribe: Attini), which uses fresh leaves to cultivate a fungus for food in specialized gardens. Using a combination of sugar composition analyses, metagenomics, and whole-genome sequencing, we reveal that the fungus garden microbiome of leaf-cutter ants is composed of a diverse community of bacteria with high plant biomass-degrading capacity. Comparison of this microbiome?s predicted carbohydrate-degrading enzyme profile with other metagenomes shows closest similarity to the bovine rumen, indicating evolutionary convergence of plant biomass degrading potential between two important herbivorous animals. Genomic and physiological characterization of two dominant bacteria in the fungus garden microbiome provides evidence of their capacity to degrade cellulose. Given the recent interest in cellulosic biofuels, understanding how large-scale and rapid plant biomass degradation occurs in a highly evolved insect herbivore is of particular relevance for bioenergy.

An insect herbivore microbiome with high plant biomass-degrading capacity.

Directory of Open Access Journals (Sweden)

Garret Suen

2010-09-01

Full Text Available Herbivores can gain indirect access to recalcitrant carbon present in plant cell walls through symbiotic associations with lignocellulolytic microbes. A paradigmatic example is the leaf-cutter ant (Tribe: Attini, which uses fresh leaves to cultivate a fungus for food in specialized gardens. Using a combination of sugar composition analyses, metagenomics, and whole-genome sequencing, we reveal that the fungus garden microbiome of leaf-cutter ants is composed of a diverse community of bacteria with high plant biomass-degrading capacity. Comparison of this microbiome's predicted carbohydrate-degrading enzyme profile with other metagenomes shows closest similarity to the bovine rumen, indicating evolutionary convergence of plant biomass degrading potential between two important herbivorous animals. Genomic and physiological characterization of two dominant bacteria in the fungus garden microbiome provides evidence of their capacity to degrade cellulose. Given the recent interest in cellulosic biofuels, understanding how large-scale and rapid plant biomass degradation occurs in a highly evolved insect herbivore is of particular relevance for bioenergy.

Sharp burnout failure observed in high current-carrying double-walled carbon nanotube fibers

Science.gov (United States)

Song, Li; Toth, Geza; Wei, Jinquan; Liu, Zheng; Gao, Wei; Ci, Lijie; Vajtai, Robert; Endo, Morinobu; Ajayan, Pulickel M.

2012-01-01

We report on the current-carrying capability and the high-current-induced thermal burnout failure modes of 5-20 µm diameter double-walled carbon nanotube (DWNT) fibers made by an improved dry-spinning method. It is found that the electrical conductivity and maximum current-carrying capability for these DWNT fibers can reach up to 5.9 × 105 S m - 1 and over 1 × 105 A cm - 2 in air. In comparison, we observed that standard carbon fiber tended to be oxidized and burnt out into cheese-like morphology when the maximum current was reached, while DWNT fiber showed a much slower breakdown behavior due to the gradual burnout in individual nanotubes. The electron microscopy observations further confirmed that the failure process of DWNT fibers occurs at localized positions, and while the individual nanotubes burn they also get aligned due to local high temperature and electrostatic field. In addition a finite element model was constructed to gain better understanding of the failure behavior of DWNT fibers.

Development of High Capacity Split Stirling Cryocooler for HTS

Science.gov (United States)

Yumoto, Kenta; Nakano, Kyosuke; Hiratsuka, Yoshikatsu

Sumitomo Heavy Industries, Ltd. (SHI) developed a high-power Stirling-type pulse tube cryocooler for cooling high-temperature superconductor (HTS) devices, such as superconductor motors, superconducting magnetic energy storage (SMES), and fault current limiters. The experimental results of a prototype pulse tube cryocooler were reported in September 2013. For a U-type expander, the cooling capacity was 151 W at 70 K with a compressor input power of 4 kW. Correspondingly, the coefficient of performance (COP) was about 0.038. However, the efficiency of the cryocooler is required to be COP > 0.1 and it was found that, theoretically, it is difficult to further improve the efficiency of a pulse tube cryocooler because the workflow generated at the hot end of the pulse tube cannot be recovered. Therefore, it was decided to change the expander to a free-piston type from a pulse tube type. A prototype was developed and preliminary experiments were conducted. A cooling capacity of 120 W at 70 K with a compressor input power of 2.15 kW with corresponding COP of 0.056, was obtained. The detailed results are reported in this paper.

High-capacity method for hiding data in the discrete cosine transform domain

Science.gov (United States)

Qazanfari, Kazem; Safabakhsh, Reza

2013-10-01

Steganography is the art and science of hiding data in different media such as texts, audios, images, and videos. Data hiding techniques are generally divided into two groups: spatial and frequency domain techniques. Spatial domain methods generally have low security and, as a result, are less attractive to researchers. Discrete cosine transform (DCT) is the most common transform domain used in steganography and JPEG compression. Since a large number of the DCT coefficients of JPEG images are zero, the capacity of DCT domain-based steganography methods is not very high. We present a high-capacity method for hiding messages in the DCT domain. We describe the method in two classes where the receiver has and where the receiver does not have the cover image. In each class, we consider three cases for each coefficient. By considering n coefficients, there are 3n different situations. The method embeds ⌊log2 3n⌋ bits in these n coefficients. We show that the maximum reachable capacity by our method is 58% higher than the other general steganography methods. Experimental results show that the histogram-based steganalysis methods cannot detect the stego images produced by the proposed method while the capacity is increased significantly.

High-Capacity Hybrid Optical Fiber-Wireless Communications Links in Access Networks

DEFF Research Database (Denmark)

Pang, Xiaodan

of broadband services access. To realize the seamless convergence between the two network segments, the lower capacity of wireless systems need to be increased to match the continuously increasing bandwidth of fiber-optic systems. The research works included in this thesis are devoted to experimental...... investigations of photonic-wireless links with record high capacities to fulfill the requirements of next generation hybrid optical fiber-wireless access networks. The main contributions of this thesis have expanded the state-of-the-art in two main areas: high speed millimeter-wave (mm-wave) communication links......Integration between fiber-optic and wireless communications systems in the "last mile" access networks is currently considered as a promising solution for both service providers and users, in terms of minimizing deployment cost, shortening upgrading period and increasing mobility and flexibility...

Managing the market risk in pipeline capacity positions

International Nuclear Information System (INIS)

Simard, T.S.

1998-01-01

Managing the risk involved in adding new pipeline capacity was explored in this presentation. Topics discussed included: (1) pipeline capacity positions as basis swaps, (2) physical capacity versus basis transactions, (3) managing the market price risk in a capacity position, and (4) sharing of pipeline market risk. Pipeline owners were advised to recognize that pipeline capacity carries significant market price risk, that basis markets can sometimes be more volatile than outright markets, and to treat physical capacity market risk the same way as one would treat a financial basis position. 2 figs

High-capacity aqueous zinc batteries using sustainable quinone electrodes

Science.gov (United States)

Zhao, Qing; Huang, Weiwei; Luo, Zhiqiang; Liu, Luojia; Lu, Yong; Li, Yixin; Li, Lin; Hu, Jinyan; Ma, Hua; Chen, Jun

2018-01-01

Quinones, which are ubiquitous in nature, can act as sustainable and green electrode materials but face dissolution in organic electrolytes, resulting in fast fading of capacity and short cycle life. We report that quinone electrodes, especially calix[4]quinone (C4Q) in rechargeable metal zinc batteries coupled with a cation-selective membrane using an aqueous electrolyte, exhibit a high capacity of 335 mA h g−1 with an energy efficiency of 93% at 20 mA g−1 and a long life of 1000 cycles with a capacity retention of 87% at 500 mA g−1. The pouch zinc batteries with a respective depth of discharge of 89% (C4Q) and 49% (zinc anode) can deliver an energy density of 220 Wh kg−1 by mass of both a C4Q cathode and a theoretical Zn anode. We also develop an electrostatic potential computing method to demonstrate that carbonyl groups are active centers of electrochemistry. Moreover, the structural evolution and dissolution behavior of active materials during discharge and charge processes are investigated by operando spectral techniques such as IR, Raman, and ultraviolet-visible spectroscopies. Our results show that batteries using quinone cathodes and metal anodes in aqueous electrolyte are reliable approaches for mass energy storage. PMID:29511734

Hydrogen storage capacity of titanium met-cars

International Nuclear Information System (INIS)

Akman, N; Durgun, E; Yildirim, T; Ciraci, S

2006-01-01

The adsorption of hydrogen molecules on the titanium metallocarbohedryne (met-car) cluster has been investigated by using the first-principles plane wave method. We have found that, while a single Ti atom at the corner can bind up to three hydrogen molecules, a single Ti atom on the surface of the cluster can bind only one hydrogen molecule. Accordingly, a Ti 8 C 12 met-car can bind up to 16 H 2 molecules and hence can be considered as a high-capacity hydrogen storage medium. Strong interaction between two met-car clusters leading to the dimer formation can affect H 2 storage capacity slightly. Increasing the storage capacity by directly inserting H 2 into the met-car or by functionalizing it with an Na atom have been explored. It is found that the insertion of neither an H 2 molecule nor an Na atom could further promote the H 2 storage capacity of a Ti 8 C 12 cluster. We have also tested the stability of the H 2 -adsorbed Ti 8 C 12 met-car with ab initio molecular dynamics calculations which have been carried out at room temperature

Developing a Personnel Capacity Indicator for a high turnover Cartographic Production Sector

Science.gov (United States)

Mandarino, Flávia; Pessôa, Leonardo A. M.

2018-05-01

This paper describes a framework for development of an indicator for human re-sources capacity management in a military organization responsible for nautical chart production. Graphic chart for the results of the model COPPE-COSENZA (Cosenza et al. 2015) is used to properly present the personnel capacity within a high people turnover environment. The specific skills for the nautical charts production allied to the turnover rate require continuous and adequate personnel in-corporation and a capacity building through education and on-the-job training. The adopted approach for the study establishes quantitative values to fulfill quality requirements, and also presents graphically a profile for the human resources on a specific job to facilitate diagnosis and corrective actions.

Extreme genetic structure in a social bird species despite high dispersal capacity.

Science.gov (United States)

Morinha, Francisco; Dávila, José A; Bastos, Estela; Cabral, João A; Frías, Óscar; González, José L; Travassos, Paulo; Carvalho, Diogo; Milá, Borja; Blanco, Guillermo

2017-05-01

Social barriers have been shown to reduce gene flow and contribute to genetic structure among populations in species with high cognitive capacity and complex societies, such as cetaceans, apes and humans. In birds, high dispersal capacity is thought to prevent population divergence unless major geographical or habitat barriers induce isolation patterns by dispersal, colonization or adaptation limitation. We report that Iberian populations of the red-billed chough, a social, gregarious corvid with high dispersal capacity, show a striking degree of genetic structure composed of at least 15 distinct genetic units. Monitoring of marked individuals over 30 years revealed that long-distance movements over hundreds of kilometres are common, yet recruitment into breeding populations is infrequent and highly philopatric. Genetic differentiation is weakly related to geographical distance, and habitat types used are overall qualitatively similar among regions and regularly shared by individuals of different populations, so that genetic structure is unlikely to be due solely to isolation by distance or isolation by adaptation. Moreover, most population nuclei showed relatively high levels of genetic diversity, suggesting a limited role for genetic drift in significantly differentiating populations. We propose that social mechanisms may underlie this unprecedented level of genetic structure in birds through a pattern of isolation by social barriers not yet described, which may have driven this remarkable population divergence in the absence of geographical and environmental barriers. © 2017 John Wiley & Sons Ltd.

SnO2 nanoparticles anchored on vertically aligned graphene with a high rate, high capacity, and long life for lithium storage

International Nuclear Information System (INIS)

Li, Na; Sonsg, Huawei; Cui, Hao; Wang, Chengxin

2014-01-01

As a high-theoretical-capacity (782 mA hg-1), low-cost and low-toxicity material, SnO2 has attracted intense interest for use as an anode electrode for lithium-ion batteries (LIBs). Despite intensive study, the practical use of SnO2-based anodes is hindered by their poor capacity retention and low rate capacity resulting from their large specific-volume changes and kinetic limitations in ion/electron transfer during the lithium ion insertion/extraction process. Improving the performance of SnO2-based electrodes has become one of the most popular scientific and industrial efforts. Herein, we present a type of SnO2-graphene composite anode in which SnO2 nanoparticles are uniformly anchored on both sides of vertically aligned graphene nanosheets (SnO2-VAGN-SnO2). The VAGNs sandwiched by the nanoparticles can supply rapid ion and electron transport pathways for Li+ and e-. Such integrated electrodes exhibit high specific capacity and excellent cycling stability, even at high current densities. The cells can cycle more than 5,000 times and retain a reversible capacity of 210 mA h g-1 at 9 A g-1. A high current density of up to 20 A g-1 is achieved, and the power and energy density can reach 1576.75 W kg-1 and 110.14 Wh kg-1, respectively. These performances indicate that the composite could offer the advantages of both LIBs (high energy density) and supercapacitors (high power density)

Building the UPPA high capacity tensiometer

Directory of Open Access Journals (Sweden)

Mendes Joao

2016-01-01

Full Text Available High capacity tensiometers (HCTs are sensors capable of directly measuring tensile pore water pressure (suction in soils. HCTs are typically composed of a casing that encapsulates a high air entry value ceramic filter, a water reservoir and a pressure sensing element. Since the creation of the first HCT by Ridley and Burland in 1993 at Imperial College London, HCTs have been almost exclusively built and used in academic research. The limited use in industrial applications can be explained by a lack of unsaturated soil mechanics knowledge among engineering practitioners but also by the technical difficulties associated to the direct measurement of tensile water pressures beyond the cavitation limit of -100kPa. In this paper, we present the recent design and manufacture of a new HCT at the Université de Pau et des Pays de l’Adour (UPPA in France. Different prototypes were tried by changing the main components of the device including the type of ceramic filter, pressure transducer and geometry of the external casing. In particular, two ceramic filters of distinct porosity, three pressure transducers with distinct materials/geometries and four casing designs were tested.

Carrying capacity of coral reefs

Digital Repository Service at National Institute of Oceanography (India)

Wafar, M.V.M.

The sustainable yield of a commercially exploited fishery is assessed by the biological and environmental factors (including fishing effort). These parameters with a reef are vastly diverse-size, location, species diversity, productivity type...

High-voltage, high-current, solid-state closing switch

Science.gov (United States)

Focia, Ronald Jeffrey

2017-08-22

A high-voltage, high-current, solid-state closing switch uses a field-effect transistor (e.g., a MOSFET) to trigger a high-voltage stack of thyristors. The switch can have a high hold-off voltage, high current carrying capacity, and high time-rate-of-change of current, di/dt. The fast closing switch can be used in pulsed power applications.

The Comprehensive Evaluation on Grassland Eco-tourism Environmental Carrying Capacity:A Case of Hulunbeier%草原生态旅游环境承载力综合评价--以呼伦贝尔为例

Institute of Scientific and Technical Information of China (English)

杨智勇

2013-01-01

生态旅游环境承载力的提出与发展，是协调景区旅游业发展与旅游地生态环境矛盾的一种有效手段和科学管理方法。依据草原生态旅游环境承载力的基本内涵，构建了由生态环境、经济环境、社会环境三个承载子系统构成的草原旅游环境承载力评价指标体系，采用层次分析法对呼伦贝尔草原2005-2012年旅游环境承载力水平进行量化测度与系统分析，指出了制约呼伦贝尔草原生态旅游环境承载力进一步发展的瓶颈因素，在此基础上提出了相关的政策建议。%With the development of the eco-tourism carrying capacity, it has become one of the effective means and scientific management methods with coordination of tourism development and tourism ecological contradiction. the paper constructs the evaluation system of grassland?eco-tourism environmental carrying capacity of three carrying subsystems including ecology, economy and society, and then uses the Analytic Hierarchy Process to quantitatively measure and systematically analyze the carrying capacity of the Grassland?eco-tourism during 2005-2012 in Hulunbeier. Finally, the paper finds out the bottle -neck factor restrained ecotourism development and then puts forward?relevant policy recommendations.

Evaluation of Marine Resource Carrying Capacity in the Construction of Qingdao Blue Economy Zone%青岛市蓝色经济区建设的海洋资源承载力评价

Institute of Scientific and Technical Information of China (English)

李京梅; 许玲

2013-01-01

From the standpoints of marine resources supply and marine industry demands ,this article built a comprehensive evaluation indicator system and measured marine resource carrying capacity in Qing-dao from 2001 to 2010 by the fuzzy comprehensive evaluation method .The results showed that the devel-opment of marine industry was beyond the marine resource carrying capacity in 2001 to 2006 and 2008 ,and was within the carrying capacity in the rest three years .The construction of the seaports has increased the supply ability of marine resources to some extent ,but the pollution caused by traditional marine industries is still huge ,and is a major cause for the bad performance of marine resource carrying capacity .It is sug-gested that traditional aquaculture should be reformed ,and environment friendly industries like recreation fishery and tourism should be developed in the process of constructing the blue economy zone .%从胶州湾海域资源环境供给和青岛市海洋产业增长需求的角度，构建了青岛市海洋资源承载力综合评价指标体系，利用模糊综合评价方法，对青岛市2001-2010年间海洋资源承载状况进行测度。结果表明，2001-2006年及2008年青岛市海洋资源承载力处于超载状态，其余年份处于适载状态。海岸带开发的港口建设在一定程度上提高了海洋资源的供给能力，但传统海洋产业的排污需求依然较大，是海洋资源承载力超载的重要原因。建议在蓝色经济区建设中，加快对传统养殖业的改造，大力发展休闲渔业、滨海旅游业等能耗低、排污少的产业。

Hydroxylamine hydrochloride: A novel anode material for high capacity lithium-ion batteries

Science.gov (United States)

Shao, Lianyi; Shu, Jie; Lao, Mengmeng; Lin, Xiaoting; Wu, Kaiqiang; Shui, Miao; Li, Peng; Long, Nengbing; Ren, Yuanlong

2014-12-01

H3NOHCl is used for the first time as anode material for lithium-ion batteries. Electrochemical results show that H3NOHCl with particle size of 4-12 μm can deliver an initial charge capacity of 1018.6 mAh g-1, which is much higher than commercial graphite. After 30 cycles, the reversible capacity can be kept at 676.1 mAh g-1 at 50 mA g-1. Up to 50 cycles, H3NOHCl still maintains a lithium storage capacity of 368.9 mAh g-1. Even cycled at 200 mA g-1, H3NOHCl can deliver a charge capacity of 715.7 mAh g-1. It suggests that H3NOHCl has high lithium storage capacity, excellent cycling stability and outstanding rate performance. Besides, the electrochemical reaction between H3NOHCl and Li is also investigated by various ex-situ techniques. It can be found that H3NOHCl irreversibly decomposes into Li3N and LiCl during the initial discharge process and LiNO2 can be formed after a reverse charge process.

High capacity carbon dioxide sorbent

Science.gov (United States)

Dietz, Steven Dean; Alptekin, Gokhan; Jayaraman, Ambalavanan

2015-09-01

The present invention provides a sorbent for the removal of carbon dioxide from gas streams, comprising: a CO.sub.2 capacity of at least 9 weight percent when measured at 22.degree. C. and 1 atmosphere; an H.sub.2O capacity of at most 15 weight percent when measured at 25.degree. C. and 1 atmosphere; and an isosteric heat of adsorption of from 5 to 8.5 kilocalories per mole of CO.sub.2. The invention also provides a carbon sorbent in a powder, a granular or a pellet form for the removal of carbon dioxide from gas streams, comprising: a carbon content of at least 90 weight percent; a nitrogen content of at least 1 weight percent; an oxygen content of at most 3 weight percent; a BET surface area from 50 to 2600 m.sup.2/g; and a DFT micropore volume from 0.04 to 0.8 cc/g.

Carbon carry capacity and carbon sequestration potential in China based on an integrated analysis of mature forest biomass.

Science.gov (United States)

Liu, YingChun; Yu, GuiRui; Wang, QiuFeng; Zhang, YangJian; Xu, ZeHong

2014-12-01

Forests play an important role in acting as a carbon sink of terrestrial ecosystem. Although global forests have huge carbon carrying capacity (CCC) and carbon sequestration potential (CSP), there were few quantification reports on Chinese forests. We collected and compiled a forest biomass dataset of China, a total of 5841 sites, based on forest inventory and literature search results. From the dataset we extracted 338 sites with forests aged over 80 years, a threshold for defining mature forest, to establish the mature forest biomass dataset. After analyzing the spatial pattern of the carbon density of Chinese mature forests and its controlling factors, we used carbon density of mature forests as the reference level, and conservatively estimated the CCC of the forests in China by interpolation methods of Regression Kriging, Inverse Distance Weighted and Partial Thin Plate Smoothing Spline. Combining with the sixth National Forest Resources Inventory, we also estimated the forest CSP. The results revealed positive relationships between carbon density of mature forests and temperature, precipitation and stand age, and the horizontal and elevational patterns of carbon density of mature forests can be well predicted by temperature and precipitation. The total CCC and CSP of the existing forests are 19.87 and 13.86 Pg C, respectively. Subtropical forests would have more CCC and CSP than other biomes. Consequently, relying on forests to uptake carbon by decreasing disturbance on forests would be an alternative approach for mitigating greenhouse gas concentration effects besides afforestation and reforestation.

A high mitochondrial transport rate characterizes CNS neurons with high axonal regeneration capacity.

Directory of Open Access Journals (Sweden)

Romain Cartoni

Full Text Available Improving axonal transport in the injured and diseased central nervous system has been proposed as a promising strategy to improve neuronal repair. However, the contribution of each cargo to the repair mechanism is unknown. DRG neurons globally increase axonal transport during regeneration. Because the transport of specific cargos after axonal insult has not been examined systematically in a model of enhanced regenerative capacity, it is unknown whether the transport of all cargos would be modulated equally in injured central nervous system neurons. Here, using a microfluidic culture system we compared neurons co-deleted for PTEN and SOCS3, an established model of high axonal regeneration capacity, to control neurons. We measured the axonal transport of three cargos (mitochondria, synaptic vesicles and late endosomes in regenerating axons and found that the transport of mitochondria, but not the other cargos, was increased in PTEN/SOCS3 co-deleted axons relative to controls. The results reported here suggest a pivotal role for this organelle during axonal regeneration.

High temperature heat capacities and electrical conductivities of boron carbides

International Nuclear Information System (INIS)

Matsui, Tsuneo; Arita, Yuri; Naito, Keiji; Imai, Hisashi

1991-01-01

The heat capacities and the electrical conductivities of B x C(x=3, 4, 5) were measured by means of direct heating pulse calorimetry in the temperature range from 300 to 1500 K. The heat capacities of B x C increased with increasing x value. This increase in the heat capacity is probably related to the change of the lattice vibration mode originated from the reduction of the stiffness of the intericosahedral chain accompanied with a change from C-B-C to C-B-B chains. A linear relationship between the logarithm of σT (σ is the electrical conductivity and T is the absolute temperature) of B x C and the reciprocal temperature was observed, indicating the presence of small polaron hopping as the predominant conduction mechanism. The electrical conductivity of B x C also increased with increasing x value (from 4 to 5) due to an increase of the polaron hopping of holes between carbon atoms at geometrically nonequivalent sites, since these nonequivalent sites of carbon atoms were considered to increase in either B 11 C icosahedra or in icosahedral chains with increasing x. The electrical conductivity of B 3 C was higher than that of B 4 C, which is probably due to the precipitation of high-conducting carbon. The thermal conductivity and the thermodynamic quantities of B 4 C were also determined precisely from the heat capacity value. (orig.)

How high is visual short-term memory capacity for object layout?

Science.gov (United States)

Sanocki, Thomas; Sellers, Eric; Mittelstadt, Jeff; Sulman, Noah

2010-05-01

Previous research measuring visual short-term memory (VSTM) suggests that the capacity for representing the layout of objects is fairly high. In four experiments, we further explored the capacity of VSTM for layout of objects, using the change detection method. In Experiment 1, participants retained most of the elements in displays of 4 to 8 elements. In Experiments 2 and 3, with up to 20 elements, participants retained many of them, reaching a capacity of 13.4 stimulus elements. In Experiment 4, participants retained much of a complex naturalistic scene. In most cases, increasing display size caused only modest reductions in performance, consistent with the idea of configural, variable-resolution grouping. The results indicate that participants can retain a substantial amount of scene layout information (objects and locations) in short-term memory. We propose that this is a case of remote visual understanding, where observers' ability to integrate information from a scene is paramount.

The anterior-ventrolateral temporal lobe contributes to boosting visual working memory capacity for items carrying semantic information.

Science.gov (United States)

Chiou, Rocco; Lambon Ralph, Matthew A

2018-04-01

Working memory (WM) is a buffer that temporarily maintains information, be it visual or auditory, in an active state, caching its contents for online rehearsal or manipulation. How the brain enables long-term semantic knowledge to affect the WM buffer is a theoretically significant issue awaiting further investigation. In the present study, we capitalise on the knowledge about famous individuals as a 'test-case' to study how it impinges upon WM capacity for human faces and its neural substrate. Using continuous theta-burst transcranial stimulation combined with a psychophysical task probing WM storage for varying contents, we provide compelling evidence that (1) faces (regardless of familiarity) continued to accrue in the WM buffer with longer encoding time, whereas for meaningless stimuli (colour shades) there was little increment; (2) the rate of WM accrual was significantly more efficient for famous faces, compared to unknown faces; (3) the right anterior-ventrolateral temporal lobe (ATL) causally mediated this superior WM storage for famous faces. Specifically, disrupting the ATL (a region tuned to semantic knowledge including person identity) selectively hinders WM accrual for celebrity faces while leaving the accrual for unfamiliar faces intact. Further, this 'semantically-accelerated' storage is impervious to disruption of the right middle frontal gyrus and vertex, supporting the specific and causative contribution of the right ATL. Our finding advances the understanding of the neural architecture of WM, demonstrating that it depends on interaction with long-term semantic knowledge underpinned by the ATL, which causally expands the WM buffer when visual content carries semantic information. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

High-voltage high-current triggering vacuum switch

International Nuclear Information System (INIS)

Alferov, D.F.; Bunin, R.A.; Evsin, D.V.; Sidorov, V.A.

2012-01-01

Experimental investigations of switching and breaking capacities of the new high current triggered vacuum switch (TVS) are carried out at various parameters of discharge current. It has been shown that the high current triggered vacuum switch TVS can switch repeatedly a current from units up to ten kiloampers with duration up to ten millisecond [ru

Study on the flow nonuniformity in a high capacity Stirling pulse tube cryocooler

Science.gov (United States)

You, X.; Zhi, X.; Duan, C.; Jiang, X.; Qiu, L.; Li, J.

2017-12-01

High capacity Stirling-type pulse tube cryocoolers (SPTC) have promising applications in high temperature superconductive motor and gas liquefaction. However, with the increase of cooling capacity, its performance deviates from well-accepted one-dimensional model simulation, such as Sage and Regen, mainly due to the strong field nonuniformity. In this study, several flow straighteners placed at both ends of the pulse tube are investigated to improve the flow distribution. A two-dimensional model of the pulse tube based on the computational fluid dynamics (CFD) method has been built to study the flow distribution of the pulse tube with different flow straighteners including copper screens, copper slots, taper transition and taper stainless slot. A SPTC set-up which has more than one hundred Watts cooling power at 80 K has been built and tested. The flow straighteners mentioned above have been applied and tested. The results show that with the best flow straightener the cooling performance of the SPTC can be significantly improved. Both CFD simulation and experiment show that the straighteners have impacts on the flow distribution and the performance of the high capacity SPTC.

The sensory components of high-capacity iconic memory and visual working memory

Directory of Open Access Journals (Sweden)

Claire eBradley

2012-09-01

Full Text Available Early visual memory can be split into two primary components: a high-capacity, short-lived iconic memory followed by a limited-capacity visual working memory that can last many seconds. Whereas a large number of studies have investigated visual working memory for low-level sensory features, much research on iconic memory has used more high-level alphanumeric stimuli such as letters or numbers. These two forms of memory are typically examined separately, despite an intrinsic overlap in their characteristics. Here, we used a purely sensory paradigm to examine visual short-term memory for 10 homogeneous items of 3 different visual features (colour, orientation and motion across a range of durations from 0 to 6 seconds. We found that the amount of information stored in iconic memory is smaller for motion than for colour or orientation. Performance declined exponentially with longer storage durations and reached chance levels after ~2 seconds. Further experiments showed that performance for the 10 items at 1 second was contingent on unperturbed attentional resources. In addition, for orientation stimuli, performance was contingent on the location of stimuli in the visual field, especially for short cue delays. Overall, our results suggest a smooth transition between an automatic, high-capacity, feature-specific sensory-iconic memory and an effortful ‘lower-capacity’ visual working memory.

Optical Carry Adder.

Science.gov (United States)

1987-03-01

AOM’s) with the deflected beam as the modulator "on" state. These AOM’s ( TeO2 crystals, manufactured by Newport E.O. Systems) have high deflection...caused by the slow acoustic propagation (4.2 - 105 cm/s for TeO2 ), but this delay can be minimized by placing the laser beam close to the acoustic...dependent jitter in the optical carry to below 1 ns, the total carry path must be less than 30 cm long (or 20 cm in glass , 14 cm in LiNbO 3). Thus, a 32

Cycloaddition in peptides for high-capacity optical storage

DEFF Research Database (Denmark)

Lohse, Brian; Berg, Rolf Henrik; Hvilsted, Søren

2006-01-01

Photodimerization of chromophores attached to a short peptide chain is investigated for high-capacity optical digital storage with UV lasers. The length and rigidity of the peptide chain assure an optimal distance and orientation of the chromophores for effective photodimerization. Using a theory...... developed by Tomlinson, the absorption cross section for the dimerization process in a uracil-ornithine-based hexamer is determined to be 9 x 10(-20) cm(2). A large change in the transmission due to irradiation in the UV area may make it possible to realize multilevel storage in a thin film of the peptides....

Towards high-reliability organising in healthcare: a strategy for building organisational capacity.

Science.gov (United States)

Aboumatar, Hanan J; Weaver, Sallie J; Rees, Dianne; Rosen, Michael A; Sawyer, Melinda D; Pronovost, Peter J

2017-08-01

In a high-reliability organisation (HRO), safety and quality (SQ) is an organisational priority, and all workforce members are engaged, continuously learning and improving their work. To build organisational capacity for SQ work, we have developed a role-tailored capacity-building framework that we are currently employing at the Johns Hopkins Armstrong Institute for Patient Safety and Quality as part of an organisational strategy towards HRO. This framework considers organisation-wide competencies for SQ that includes all staff and faculty and is integrated into a broader organisation-wide operating management system for improving quality. In this framework, achieving safe, high-quality care is connected to healthcare workforce preparedness. Capacity-building efforts are tailored to the needs of distinct groups within the workforce that fall within three categories: (1) front-line providers and staff, (2) managers and local improvement personnel and (3) SQ leaders and experts. In this paper we describe this framework, our implementation efforts to date, challenges met and lessons learnt. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Synthesis and properties of a high-capacity iron oxide adsorbent for fluoride removal from drinking water

Science.gov (United States)

Zhang, Chang; Li, Yingzhen; Wang, Ting-Jie; Jiang, Yanping; Fok, Jason

2017-12-01

A novel iron oxide adsorbent with a high fluoride adsorption capacity was prepared by a facile wet-chemical precipitation method and ethanol treatment. The ethanol-treated adsorbent was amorphous and had a high specific surface area. The adsorption capacity of the treated adsorbent was much higher than that of untreated adsorbent. The Langmuir maximum adsorption capacity of the adsorbent prepared at a low final precipitation pH (≤9.0) and treated with ethanol reached 60.8 mg/g. A fast adsorption rate was obtained, and 80% of the adsorption equilibrium capacity was achieved within 2 min. The adsorbent had high fluoride-removal efficiency for water in a wide initial pH range of 3.5-10.3 and had a high affinity for fluoride in the presence of common co-anions. The ethanol treatment resulted in structure transformation of the adsorbent by inhibiting the crystallization of the nano-precipitates. The adsorption was confirmed to be ion exchange between fluoride ions and the hydroxyl groups on the adsorbent surface.

基于智慧旅游视角的旅游景区承载力研究综述与启示∗%Literature Review and Implications on Tourism Environmental Carrying Capacity Based on the Perspective of Smart Tourism

Institute of Scientific and Technical Information of China (English)

袁箐; 陈楠; 程川

2016-01-01

随着大数据时代的到来和互联网平台技术的广泛应用，旅游信息化建设成为中国旅游产业可持续发展的重要步骤：智慧旅游应时而生。然而，一些基于景区承载力问题发生的公共旅游安全事故凸显出智慧旅游建设的不足。立足于智慧旅游、智慧景区理论，根据旅游景区承载力理论研究进展的智慧性趋势，将旅游景区承载力分为筑基期、发展期与成熟期3个发展时期，回顾了1980-2015年间国内外承载力的相关研究，并分析每个时期中承载力理论与智慧旅游、智慧景区间的关系；接着通过总结三者间的关系框架图、共融性特征描述了承载力与智慧旅游结合的联系与必然性。最后，针对国内景区承载力研究的智慧化发展进行反思，并针对相关问题提出对策，为后续研究提供理论依据。%With the advent of the era of big data and the wide application of the Internet platform technology,building tourism in-formation has become an important step in the sustainable development of our country's tourism industry.However,some of the safety accidents based on the shortages of carrying capacity revealed the building problems of smarter tourism.Based on the theo-ry of smart tourism,tourist attractions and the smart trend of tourism carrying capacity,this paper divided TCC into 3 periods of base,development and mature.This paper reviewed the development of the carrying capacity concept between 1980-2015 in do-mestic and abroad.It also analyzed the relationship between the theory of smart tourism,tourist attractions and tourism carrying capacity in each period;then,through summarizing the framework of relationship between the three blend features,it described the tourism attractions carrying capacity and smart tourism with contact and necessity.Finally,this paper reflected on the smarter trend of the development of the domestic tourism attractions carrying capacity,and put

Micronization increases vitamin E carrying and releasing abilities of insoluble fiber.

Science.gov (United States)

Hsu, Pang-Kuei; Chien, Po-Jung; Chau, Chi-Fai

2008-03-26

This study was to investigate the effects of micronization on vitamin-carrying capacity and slow-release ability of carambola (starfruit) insoluble fiber (IF) and cellulose using in vitro and in vivomodels. Upon micronization, carambola IF (8.1 microm) underwent structural changes to expose more functional groups in the fiber matrix and to exhibit higher oil-holding capacity ( approximately 20.4-fold). Micronized fibers in forms of fiber-vitamin composites, particularly the micronized carambola IF-vitamin composite, were capable of carrying vitamin E (alpha-tocopherol) up to 9.6-fold over their unmicronized forms and releasing nutrient gradually. Animal studies demonstrated that the adminstration of micronized carambola IF-vitamin composite could maintain the plasma vitamin E of rats at relatively higher levels (2.1-3.6-fold of the initial values) for at least 5 h. The results suggested that micronized fibers, particularly the micronized carambola IF, could be exploited as potential nutrient carriers in food applications and also be used to produce slow-release formulations.

High energy bursts from a solid state laser operated in the heat capacity limited regime

Science.gov (United States)

Albrecht, G.; George, E.V.; Krupke, W.F.; Sooy, W.; Sutton, S.B.

1996-06-11

High energy bursts are produced from a solid state laser operated in a heat capacity limited regime. Instead of cooling the laser, the active medium is thermally well isolated. As a result, the active medium will heat up until it reaches some maximum acceptable temperature. The waste heat is stored in the active medium itself. Therefore, the amount of energy the laser can put out during operation is proportional to its mass, the heat capacity of the active medium, and the temperature difference over which it is being operated. The high energy burst capacity of a heat capacity operated solid state laser, together with the absence of a heavy, power consuming steady state cooling system for the active medium, will make a variety of applications possible. Alternately, cooling takes place during a separate sequence when the laser is not operating. Industrial applications include new material working processes. 5 figs.

Calculating the Carrying Capacity of Flexural Prestressed Concrete Beams with Non-Metallic Reinforcement

Directory of Open Access Journals (Sweden)

Mantas Atutis

2011-04-01

Full Text Available The article reviews moment resistance design methods of prestressed concrete beams with fibre-reinforced polymer (FRP reinforcement. FRP tendons exhibit linear elastic response to rupture without yielding and thus failure is expected to be brittle. The structural behaviour of beams prestressed with FRP tendons is different from beams with traditional steel reinforcement. Depending on the reinforcement ratio, the flexural behaviour of the beam can be divided into several groups. The numerical results show that depending on the nature of the element failure, moment resistance calculation results are different by using reviewed methods. It was found, that the use of non-metallic reinforcement in prestressed concrete structures is effective: moment capacity is about 5% higher than that of the beams with conventional steel reinforcement.Article in Lithuanian

The effect of angiotensin converting enzyme genotype on aerobic capacity following high intensity interval training

OpenAIRE

Goddard, N; Baker, M.D; Higgins, T; Cobbold, C

2014-01-01

Obesity increases the risk of developing type 2 diabetes mellitus (T2DM) and cardiovascular disease (CVD). Physical activity can reduce T2DM and CVD risk, and increase aerobic capacity, a significant predictor of all-cause mortality and morbidity. High intensity interval training (HIIT) produces similar improvements in aerobic capacity to continuous moderate exercise (CME). Different genotypes of angiotensin converting enzyme (ACE) have been implicated in improving aerobic capacity and theref...

A biomimetic high-capacity phenazine-based anolyte for aqueous organic redox flow batteries

Science.gov (United States)

Hollas, Aaron; Wei, Xiaoliang; Murugesan, Vijayakumar; Nie, Zimin; Li, Bin; Reed, David; Liu, Jun; Sprenkle, Vincent; Wang, Wei

2018-06-01

Aqueous soluble organic (ASO) redox-active materials have recently attracted significant attention as alternatives to traditional transition metal ions in redox flow batteries (RFB). However, reported reversible capacities of ASO are often substantially lower than their theoretical values based on the reported maximum solubilities. Here, we describe a phenazine-based ASO compound with an exceptionally high reversible capacity that exceeds 90% of its theoretical value. By strategically modifying the phenazine molecular structure, we demonstrate an increased solubility from near-zero with pristine phenazine to as much as 1.8 M while also shifting its redox potential by more than 400 mV. An RFB based on a phenazine derivative (7,8-dihydroxyphenazine-2-sulfonic acid) at its near-saturation concentration exhibits an operating voltage of 1.4 V with a reversible anolyte capacity of 67 Ah l-1 and a capacity retention of 99.98% per cycle over 500 cycles.

Emissions from heavy current carrying high density plasma and their diagnostics

International Nuclear Information System (INIS)

Hirano, Katsumi

1987-06-01

Workshop on ''Emissions from heavy current carrying high density plasma and diagnostics'' was held at Institute of Plasma Physics, Nagoya University on 3. and 4. December 1986 under a collaborating research Program. The workshop was attended by 43 researchers from 19 labolatories. A total of 22 papers were submitted and are presented in these proceedings. The largest group of papers was that on soft X-ray emission. It seems this topic is a foremost interest for groups which engaged in research of the Z pinch and the plasma focus. A variety of problems in pinched dense plasmas, namely spectroscopy, diagnostics, pinch dynamics, and related engineering aspects were also discussed. (author)

Heat capacity measurements and XPS studies on uranium-lanthanum mixed oxides

International Nuclear Information System (INIS)

Venkata Krishnan, R.; Mittal, V.K.; Babu, R.; Senapati, Abhiram; Bera, Santanu; Nagarajan, K.

2011-01-01

Research highlights: → Heat capacity measurements were carried out on (U 1-y La y )O 2±x (y = 0.2, 0.4, 0.6, and 0.8) using differential scanning calorimeter (DSC) in the temperature range 298-800 K. → Enthalpy increment measurements were carried out on the above solid solution using high temperature drop calorimetry in the temperature range 800-1800 K. → Chemical states of U and La in the solid solutions of mixed oxides were determined using X-ray photoelectron spectroscopy (XPS). → The anomalous increase in the heat capacity is attributed to certain thermal excitation process namely Frenkel pair defect of oxygen. → From the XPS investigation, it is observed that the O/M ratio at the surface is higher than that to the bulk. → In uranium rich mixed oxide samples, the surface O/M is greater than 2 whereas that in La rich mixed oxides, it is less than 2, though the bulk O/M in all the samples are less than 2. - Abstract: Heat capacity measurements were carried out on (U 1-y La y )O 2±x (y = 0.2, 0.4, 0.6, and 0.8) using differential scanning calorimeter (DSC) in the temperature range 298-800 K. Enthalpy increment measurements were carried out on the above solid solutions using high temperature drop calorimetry in the temperature range 800-1800 K. Chemical states of U and La in the solid solutions of mixed oxides were determined using X-ray photoelectron spectroscopy (XPS). Oxygen to metal ratios of (U 1-y La y )O 2±x were estimated from the ratios of different chemical states of U present in the sample. Anomalous increase in the heat capacity is observed for (U 1-y La y )O 2±x (y = 0.4, 0.6 and 0.8) with onset temperatures in the range of 1000-1200 K. The anomalous increase in the heat capacity is attributed to certain thermal excitation process, namely, Frenkel pair defect of oxygen. The heat capacity value of (U 1-y La y )O 2±x (y = 0.2, 0.4, 0.6, and 0.8) at 298 K are 65.3, 64.1, 57.7, 51.9 J K -1 mol -1 , respectively. From the XPS investigations

Evaluation of high frequency ground motion effects on the seismic capacity of NPP equipments

International Nuclear Information System (INIS)

Choi, In Kil; Seo, Jeong Moon; Choun, Young Sun

2003-04-01

In this study, the uniform hazard spectrum for the example Korean nuclear power plants sites were developed and compared with various response spectra used in past seismic PRA and SMA. It shows that the high frequency ground motion effects should be considered in seismic safety evaluations. The floor response spectra were developed using the direct generation method that can develop the floor response spectra from the input response spectrum directly with only the dynamic properties of structures obtained from the design calculation. Most attachment of the equipments to the structure has a minimum distortion capacity. This makes it possible to drop the effective frequency of equipment to low frequency before it is severely damaged. The results of this study show that the high frequency ground motion effects on the floor response spectra were significant, and the effects should be considered in the SPRA and SMA for the equipments installed in a building. The high frequency ground motion effects are more important for the seismic capacity evaluation of functional failure modes. The high frequency ground motion effects on the structural failure of equipments that attached to the floor by welding can be reduced by the distortion capacity of welded anchorage

Novel asymptotic results on the high-order statistics of the channel capacity over generalized fading channels

KAUST Repository

Yilmaz, Ferkan

2012-06-01

The exact analysis of the higher-order statistics of the channel capacity (i.e., higher-order ergodic capacity) often leads to complicated expressions involving advanced special functions. In this paper, we provide a generic framework for the computation of the higher-order statistics of the channel capacity over generalized fading channels. As such, this novel framework for the higher-order statistics results in simple, closed-form expressions which are shown to be asymptotically tight bounds in the high signal-to-noise ratio (SNR) regime of a variety of fading environment. In addition, it reveals the existence of differences (i.e., constant capacity gaps in log-domain) among different fading environments. By asymptotically tight bound we mean that the high SNR limit of the difference between the actual higher-order statistics of the channel capacity and its asymptotic bound (i.e., lower bound) tends to zero. The mathematical formalism is illustrated with some selected numerical examples that validate the correctness of our newly derived results. © 2012 IEEE.

Facile ultrasonic synthesis of CoO quantum dot/graphene nanosheet composites with high lithium storage capacity.

Science.gov (United States)

Peng, Chengxin; Chen, Bingdi; Qin, Yao; Yang, Shihe; Li, Chunzhong; Zuo, Yuanhui; Liu, Siyang; Yang, Jinhu

2012-02-28

In this paper, we report a facile ultrasonic method to synthesize well-dispersed CoO quantum dots (3-8 nm) on graphene nanosheets at room temperature by employing Co(4)(CO)(12) as cobalt precursor. The prepared CoO/graphene composites displayed high performance as an anode material for lithium-ion battery, such as high reversible lithium storage capacity (1592 mAh g(-1) after 50 cycles), high Coulombic efficiency (over 95%), excellent cycling stability, and high rate capability (1008 mAh g(-1) with a total retention of 77.6% after 50 cycles at a current density of 1000 mA g(-1), dramatically increased from the initial 50 mA g(-1)). The extraordinary performance arises from the structure advantages of the composites: the nanosized CoO quantum dots with high dispersity on conductive graphene substrates supply not only large quantity of accessible active sites for lithium-ion insertion but also good conductivity and short diffusion length for lithium ions, which are beneficial for high capacity and rate capability. Meanwhile, the isolated CoO quantum dots anchored tightly on the graphene nanosheets can effectively circumvent the volume expansion/contraction associated with lithium insertion/extraction during discharge/charge processes, which is good for high capacity as well as cycling stability. Moreover, regarding the anomalous behavior of capacity increase with cycles (activation effect) observed, we proposed a tentative hypothesis stressing the competition between the conductivity increase and the amorphorization of the composite electrodes during cycling in determining the trends of the capacity, in the hope to gain a fuller understanding of the inner working of the novel nanostructured electrode-based lithium-ion batteries.

Physicochemical characterization and antioxidant capacity of pitanga fruits (Eugenia uniflora L.

Directory of Open Access Journals (Sweden)

Milena Bagetti

2011-03-01

Full Text Available This study was carried out to obtain more information about the physicochemical properties, composition, and antioxidant activity of pitanga fruits (Eugenia uniflora L., particularly fruits from the State of Rio Grande do Sul, Brazil. Pitanga with different flesh colors (purple, red, and orange from tree selections cultivated at Embrapa Clima Temperado (RS-Brazil were analyzed. Only slight differences were observed in the quality parameters and in the proximate and fatty acid compositions among the fruits studied. The extracts from purple-fleshed pitanga had the highest total phenolic and anthocyanin contents along with the highest antioxidant capacity. The antioxidant capacity (DPPH and FRAP assays of methanolic pitanga extracts was highly correlated with the total phenolic content, but in ethanolic extracts, the anthocyanin content was correlated only with the FRAP antioxidant capacity. Orange fleshed pitanga had higher β-cryptoxanthin and β-carotene levels than those of the red fruit, which had higher lycopene content. The results indicate that the purple-fleshed pitanga, cultivated in Rio Grande do Sul, is a rich source of phenolic compounds and has high antioxidant capacity. The red and orange-fleshed pitanga, on the other hand, are rich sources of carotenoids.

About rats and jackfruit trees: modeling the carrying capacity of a Brazilian Atlantic Forest spiny-rat Trinomys dimidiatus (Günther, 1877) - Rodentia, Echimyidae - population with varying jackfruit tree (Artocarpus heterophyllus L.) abundances.

Science.gov (United States)

Mello, J H F; Moulton, T P; Raíces, D S L; Bergallo, H G

2015-01-01

We carried out a six-year study aimed at evaluating if and how a Brazilian Atlantic Forest small mammal community responded to the presence of the invasive exotic species Artocarpus heterophyllus, the jackfruit tree. In the surroundings of Vila Dois Rios, Ilha Grande, RJ, 18 grids were established, 10 where the jackfruit tree was present and eight were it was absent. Previous results indicated that the composition and abundance of this small mammal community were altered by the presence and density of A. heterophyllus. One observed effect was the increased population size of the spiny-rat Trinomys dimidiatus within the grids where the jackfruit trees were present. Therefore we decided to create a mathematical model for this species, based on the Verhulst-Pearl logistic equation. Our objectives were i) to calculate the carrying capacity K based on real data of the involved species and the environment; ii) propose and evaluate a mathematical model to estimate the population size of T. dimidiatus based on the monthly seed production of jackfruit tree, Artocarpus heterophyllus and iii) determinate the minimum jackfruit tree seed production to maintain at least two T. dimidiatus individuals in one study grid. Our results indicated that the predicted values by the model for the carrying capacity K were significantly correlated with real data. The best fit was found considering 20~35% energy transfer efficiency between trophic levels. Within the scope of assumed premises, our model showed itself to be an adequate simulator for Trinomys dimidiatus populations where the invasive jackfruit tree is present.

The influence of executive capacity on selective attention and subsequent processing

Directory of Open Access Journals (Sweden)

Kirk R. Daffner

2012-06-01

Full Text Available Recent investigations that suggest selective attention is dependent on top-down control mechanisms lead to the expectation that individuals with high executive capacity would exhibit more robust neural indices of selective attention. This prediction was tested by using event-related potentials (ERPs to examine differences in markers of information processing across 25 subjects divided into 2 groups based on high vs. average executive capacity, as defined by neuropsychological test scores. Subjects performed an experimental task requiring selective attention to a specified color. In contrast to expectation, individuals with high and average executive capacity did not differ in the size of ERP indices of selective attention: the anterior Selection Positivity (SP and posterior Selection Negativity (SN. However, there were substantial differences between groups in markers of subsequent processing, including the anterior N2 (a measure of attentional control and the P3a (an index of the orienting of attention. Executive capacity predicted speed of processing at both early and late attentional stages. Individuals with lower executive capacity exhibited prolonged SN, P3a, and P3b latencies. However, the delays in carrying out selective attention operations did not account for subsequent delays in decision making, or explain excessive orienting and reduced attentional control mechanisms in response to stimuli that should have been ignored. SN latency, P3 latency, and the size of the anterior N2 made independent contributions to the variance of executive capacity. In summary, our findings suggest that current views regarding the relationship between top-down control mechanisms and selective attention may need refinement.

Polyethylenimine-modified fungal biomass as a high-capacity biosorbent for Cr(VI) anions: sorption capacity and uptake mechanisms.

Science.gov (United States)

Deng, Shubo; Ting, Yen Peng

2005-11-01

Heavy metal pollution in the aqueous environment is a problem of global concern. Biosorption has been considered as a promising technology for the removal of low levels of toxic metals from industrial effluents and natural waters. A modified fungal biomass of Penicillium chrysogenum with positive surface charges was prepared by grafting polyethylenimine (PEI) onto the biomass surface in a two-step reaction. The presence of PEI on the biomass surface was verified by FTIR and X-ray photoelectron spectroscopy (XPS) analyses. Due to the high density of amine groups in the long chains of PEI molecules on the surface, the modified biomass was found to possess positive zeta potential at pH below 10.4 as well as high sorption capacity for anionic Cr(VI). Using the Langmuir adsorption isotherm, the maximum sorption capacity for Cr(VI) at a pH range of 4.3-5.5 was 5.37 mmol/g of biomass dry weight, the highest sorption capacity for Cr(VI) compared to other sorbents reported in the literature. Scanning electronic microscopy (SEM) provided evidence of chromium aggregates formed on the biomass surface. XPS results verified the presence of Cr(III) on the biomass surface in the pH range 2.5-10.5, suggesting that some Cr(VI) anions were reduced to Cr(III) during the sorption. The sorption kinetics indicated that redox reaction occurred on the biomass surface, and whether the converted Cr(III) ions were released to solution or adsorbed on the biomass depended on the solution pH. Sorption mechanisms including electrostatic interaction, chelation, and precipitation were found to be involved in the complex sorption of chromium on the PEI-modified biomass.

单相电流对三芯钢带铠装电缆载流量试验结果影响程度的研究%Effect of Single-phase Current on the Current-carrying Capacity of Three-core Steel Armoured Cable

Institute of Scientific and Technical Information of China (English)

牛海清; 张群峰; 游勇; 赵继光; 张尧

2014-01-01

采用剥掉铠装层通以单相电流模拟三芯钢带铠装电缆通以三相电流，将敷设于电缆沟中的完整电缆段和剥掉铠装层电缆段串联加载不同的电流进行载流量试验，对比研究了两者的温度；根据电磁场理论，计算了载流量试验中的铠装损耗。按照IEC载流量计算标准，研究了铠装损耗对载流量影响的程度。研究表明，三芯铠装电缆加载单相电流时的铠装损耗不可忽略，但对载流量的影响不超过4%，且偏保守。%The current-carrying capacity of three-core cable with and without steel armour layed in cable trench was tested through applying different single-phase current, and their temperature was compared. The loss induced by armour of the test cable was calculated according to electromagnetic field theory. The effect of loss induced by armour on the current-carrying capacity was studied according to IEC standard of current-carrying capacity. The results show that the loss induced by armour of the three-core cable can’t be neglected when applying single-phase current, and the current-carrying capacity decreases by about 4%, which is acceptable.

Competition under capacitated dynamic lot-sizing with capacity acquisition

DEFF Research Database (Denmark)

Li, Hongyan; Meissner, Joern

2011-01-01

Lot-sizing and capacity planning are important supply chain decisions, and competition and cooperation affect the performance of these decisions. In this paper, we look into the dynamic lot-sizing and resource competition problem of an industry consisting of multiple firms. A capacity competition...... production setup, along with inventory carrying costs. The individual production lots of each firm are limited by a constant capacity restriction, which is purchased up front for the planning horizon. The capacity can be purchased from a spot market, and the capacity acquisition cost fluctuates...

High efficiency-large capacity circulating water pump for Hamaoka Nuclear Power Station unit No.3

International Nuclear Information System (INIS)

Ito, Akihiko; Sasamuro, Takemi; Takeda, Hirohisa.

1988-01-01

No.3 plant in the Hamaoka Nuclear Power Station, Chube Electric Power Co., Inc. is the latest plant of 1100 MW class BWR type, which began the commercial operation in August, 1987. The seawater intake and discharge system of this plant is composed of the channel exceeding 2 km in the total length from the intake tower to the discharge port. The circulating water pump installed in this system has the capacity of 1620 m 3 /min and the total head of 16.5 m, which are the largest in the world. It attained the efficiency as high as more than 90%. Three pumps supply seawater to three-body condensers. The design of the impeller and the casing for obtaining high efficiency, the structural design for facilitating maintenance, the manufacture of a model pump and the performance test using it and so on are reported. The most important item in the manufacture was the form of the onebody impeller weighing 4.5t. The confirmation of the performance of the actual machines was carried out as a part of the synthetic function confirmation test at the power station, and the flow rate was measured with Pitot tubes and ultrasonic flowmeters. (Kako, I.)

Flower-like SnO2/graphene composite for high-capacity lithium storage

International Nuclear Information System (INIS)

Liu Hongdong; Huang Jiamu; Li Xinlu; Liu Jia; Zhang Yuxin; Du Kun

2012-01-01

Flower-like SnO 2 /graphene composite is synthesized by a simple hydrothermal method for high-capacity lithium storage. The as-prepared products are characterized by XRD, FTIR, FESEM, TGA and Nitrogen adsorption/desorption. The electrochemical performance of the flower-like SnO 2 /graphene composite is measured by cyclic voltammetry and galvanostatic charge/discharge cycling. The results show that the flower-like SnO 2 nanorod clusters are 800 nm in size and homogeneously adhere on graphene sheets. The flower-like SnO 2 /graphene composite displays superior Li-battery performance with large reversible capacity, excellent cyclic performance and good rate capability.

High-Density Near-Field Readout over 50 GB Capacity Using Solid Immersion Lens with High Refractive Index

Science.gov (United States)

Shinoda, Masataka; Saito, Kimihiro; Kondo, Takao; Ishimoto, Tsutomu; Nakaoki, Ariyoshi

2003-02-01

We have investigated high-density near-field readout using a solid immersion lens with a high refractive index. By using a glass material with a high refractive index of 2.08, we developed an optical pick-up with the effective numerical aperture of 1.8. We could observe a clear eye pattern for a 50 GB capacity disc in 120 mm diameter. We confirmed that the near-field readout system is promising method of realizing a high-density optical disc system.

SDS-PAGE analysis of high molecular weight glutenin subunits in SP3 from spaceflight carried wheat

International Nuclear Information System (INIS)

Zhang Su'na; Lv Jinyin

2009-01-01

The compositions of high molecular weight glutenin subunits (HMW-GS) of the third generation (SP 3 ) of two wheat varieties spaceflight carried were analyzed by SDS-PAGE. The quality score of Glu-1 of each site was calculated according to the quality rating system. The results showed that the space flight carried could result in a higher frequency of HMW-GS gene mutation. The variance frequency of HMW-GS in SP 3 of Shaan253 and Xinong1043 were 27.08% and 27.45%, and the quality score in SP 3 of Shaan253 and Xinong1043 were 7 and 6, respectively. Shaan253 SP 3 generation mutants were considered as high-quality wheat. (authors)

Review on anionic redox for high-capacity lithium- and sodium-ion batteries

International Nuclear Information System (INIS)

Zhao, Chenglong; Lu, Yaxiang; Hu, Yong-Sheng; Chen, Liquan; Wang, Qidi; Li, Baohua

2017-01-01

Rechargeable batteries, especially lithium-ion batteries, are now widely used as power sources for portable electronics and electric vehicles, but material innovations are still needed to satisfy the increasing demand for larger energy density. Recently, lithium- and sodium-rich electrode materials, including the A 2 MO 3 -family layered compounds (A  =  Li, Na; M  =  Mn 4+ , Ru 4+ , etc), have been extensively studied as potential high-capacity electrode materials for a cumulative cationic and anionic redox activity. Negatively charged oxide ions can potentially donate electrons to compensate for the absence of oxidable transition metals as a redox center to further increase the reversible capacity. Understanding and controlling the state-of-the-art anionic redox processes is pivotal for the design of advanced energy materials, highlighted in rechargeable batteries. Hence, experimental and theoretical approaches have been developed to consecutively study the diverting processes, states, and structures involved. In this review, we attempt to present a literature overview and provide insight into the reaction mechanism with respect to the anionic redox processes, proposing some opinions as target oriented. It is hoped that, through this discussion, the search for anionic redox electrode materials with high-capacity rechargeable batteries can be advanced, and practical applications realized as soon as possible. (topical review)

Experimental study of a novel capacity control algorithm for a multi-evaporator air conditioning system

International Nuclear Information System (INIS)

Xu Xiangguo; Pan Yan; Deng Shiming; Xia Liang; Chan Mingyin

2013-01-01

The use of a multi-evaporator air conditioning (MEAC) system is advantageous in terms of installation convenience, high design flexibility, being easy to maintain and commission, better indoor thermal comfort control and higher energy efficiency. While MEAC units worth billions of dollars are sold worldwide, the detailed accounts on compressor capacity control and refrigeration flow distribution amongst evaporators remain unavailable in public domain, mainly due to commercial confidentiality. Limited control algorithms for MEAC systems have been developed based on system simulation, and no experimental-based capacity controller developments and their controllability tests may be identified in open literature. In the study reported in this paper, a novel capacity control algorithm, which imitated On–Off control of a single evaporator air conditioning (A/C) system in each indoor unit of a MEAC system by using variable speed compressor and electronic expansion valves (EEVs), was developed. Controllability tests under various settings for experimentally validating the novel capacity control algorithm were carried out and the control algorithm was further improved based on the experimental results. - Highlights: ► A capacity control algorithm for a multi-evaporator air conditioning system was developed. ► Experimental controllability tests under various settings were carried out. ► The control algorithm was further improved based on the experimental results.

Spongelike Nanosized Mn 3 O 4 as a High-Capacity Anode Material for Rechargeable Lithium Batteries

KAUST Repository

Gao, Jie

2011-07-12

Mn3O4 has been investigated as a high-capacity anode material for rechargeable lithium ion batteries. Spongelike nanosized Mn 3O4 was synthesized by a simple precipitation method and characterized by powder X-ray diffraction, Raman scattering and scanning electron microscopy. Its electrochemical performance, as an anode material, was evaluated by galvanostatic discharge-charge tests. The results indicate that this novel type of nanosized Mn3O4 exhibits a high initial reversible capacity (869 mA h/g) and significantly enhanced first Coulomb efficiency with a stabilized reversible capacity of around 800 mA h/g after over 40 charge/discharge cycles. © 2011 American Chemical Society.

Capacity Ten-Seven

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-05-04

The study was initiated to assemble UK solar experts who would define the parameters for the design of solar cell process plant with a capacity of about 10MWp per annum and establish the optimum substrate size, cell configuration and junction structure and show that these characteristics are suited to high volume low cost production. The study focused on proven materials and techniques rather than on innovative materials and processes. Peak production should deliver panels at a cost of less than $1 per peak watt. The study was reported under the headings of fundamental studies, front contact deposition, semiconductor deposition, rear contact deposition, cell isolation and initial design study. Since much of the work is commercially sensitive, not all findings are divulged in the report. The work, which achieved all its targets, was carried out by ICP Solar Technologies UK Ltd under contract to the DTI.

A study on the carrying capacity of the available habitat for the Rhinopithecus bieti population at Mt. Laojun in Yunnan, China.

Science.gov (United States)

Li, Li; Yu, Shixiao; Ren, Baoping; Li, Ming; Wu, Ruidong; Long, Yongcheng

2009-06-01

The Yunnan snub-nosed monkey is one of the most endangered primates in the world. It is experiencing a range of ongoing threats and the persisting effects of past disturbances. The prospects for this species are not very optimistic because habitat corridors are severely damaged by logging, grazing, and mining. Each group of the monkeys in different areas is facing a unique variety of threats. Based on genetic analysis, Rhinopithecus bieti should be separated into three management units for conservation, of which the Mt. Laojun management unit involves the most endangered primates. Despite the fact that the vegetation on Mt. Laojun is in a relatively pristine state, only two groups of monkeys, of a total of fewer than 300, survive in the area. With this paper, we aimed to address the capacity of the monkeys' habitat at the study site and the possible reasons for the small populations. Rapid ecological assessment based on a SPOT 5 image and field survey was used to simulate the vegetation of the whole area based on reference ecological factors of the GIS system. The vegetation map of the site was thus derived from this simulation. Based on the previous studies, the three vegetation types were identified as the suitable habitat of the monkeys. The confusion matrix-based field GPS points were applied to analyze the precision of the habitat map. Based on the map of suitable habitat of the monkeys, the utilization of the habitat and the carrying capacity were analyzed in the GIS. The confusion matrix-based field GPS points were applied to the habitat analysis process, and it was found that the habitat map was 81.3% precise. Then, with the current habitat map, we found that the mixed forest currently used by the monkeys is only a very small fraction (2.65%) of the overall potential habitat of the population, while the dark conifer forest is 4.09%. Poaching is the greatest short-term threat to this species, particularly in the southern range where local residents have a

Atomistic Origins of High Capacity and High Structural Stability of Polymer-Derived SiOC Anode Materials.

Science.gov (United States)

Sun, Hong; Zhao, Kejie

2017-10-11

Capacity and structural stability are often mutually exclusive properties of electrodes in Li-ion batteries (LIBs): a gain in capacity is usually accompanied by the undesired large volumetric change of the host material upon lithiation. Polymer-derived ceramics, such as silicon oxycarbide (SiOC) of hybrid Si-O-C bonds, show an exceptional combination of high capacity and superior structural stability. We investigate the atomistic origins of the unique chemomechanical performance of carbon-rich SiOC using the first-principles theoretical approach. The atomic model of SiOC is composed of continuous Si-O-C units caged by a graphene-like cellular network and percolated nanovoids. The segregated sp 2 carbon network serves as the backbone to maintain the structural stability of the lattice. Li insertion is first absorbed at the nanovoid sites, and then it is accommodated by the SiOC tetrahedral units, excess C atoms, and topological defects at the edge of or within the segregated carbon network. SiOC expands up to 22% in volumetric strain at the fully lithiated capacity of 1230 mA h/g. We examine in great detail the evolution of the microscopic features of the SiOC molecule in the course of Li reactions. The first-principles modeling provides a fundamental understanding of the physicochemical properties of Si-based glass ceramics for their application in LIBs.

Titanium oxynitride thin films as high-capacity and high-rate anode materials for lithium-ion batteries

International Nuclear Information System (INIS)

Chiu, Kuo-Feng; Su, Shih-Hsuan; Leu, Hoang-Jyh; Hsia, Chen-Hsien

2015-01-01

Titanium oxynitride (TiO_xN_y) was synthesized by reactive magnetron sputtering in a mixed N_2/O_2/Ar gas at ambient temperature. TiO_xN_y thin films with various amounts of nitrogen contents were deposited by varying the N_2/O_2 ratios in the background gas. The synthesized TiO_xN_y films with different compositions (TiO_1_._8_3_7N_0_._0_6_0_, TiO_1_._8_9_0N_0_._0_6_8_, TiO_1_._8_6_5N_0_._0_7_3, and TiO_1_._8_8_2N_0_._1_6_3) all displayed anatase phase, except TiO_1_._8_8_2N_0_._1_6_3. The impedances and grain sizes showed obvious variations with the nitrogen contents. A wide potential window from 3.0 V to 0.05 V, high-rate charge–discharge testing, and long cycle testing were applied to investigate the performances of synthesized TiO_xN_y and pure TiO_2 as anodes for lithium-ion batteries. These TiO_xN_y anodes can be cycled under high rates of 125 μA/cm"2 (10 °C) because of the lower charge–transfer resistance compared with the TiO_2 anode. At 10 °C the discharge capacity of the optimal TiO_xN_y composition is 1.5 times higher than that of pure TiO_2. An unexpectedly large reversible capacity of ~ 300 μAh/cm"2 μm (~ 800 mAh/g) between 1.0 V and 0.05 V was recorded for the TiO_xN_y anodes. The TiO_xN_y anode was cycled (3.0 V to 0.05 V) at 10 °C over 300 times without capacity fading while delivering a capacity of ~ 150 μAh/cm"2 μm (~ 400 mAh/g). - Highlights: • Titanium oxynitride (TiO_xN_y) thin films as anode materials were studied. • TiO_xN_y thin films with various amounts of nitrogen contents were studied_. • High rate capability of TiO_xN_y was studied.

黄山风景区水生态承载力分析%Analysis of water ecology capacity in Huangshan Resort

Institute of Scientific and Technical Information of China (English)

王群; 章锦河; 杨兴柱

2009-01-01

文章以BODs为纳污水体的水质影响因子,计算出黄山风景区4条主要纳污水体逍遥溪、丞相源、莲花沟和丹霞溪的丰、平、枯水期的日平均纳污量和年纳污量,得出其水生态承载力总体上较弱,且存在时间与空间分布不均的特征.据此,从浓度控制与总量控制相结合的角度,建立了"水量-水质-水生态系统"阈值模型,提出通过降低用水标准、提高出水指标、进行中水回用、采用节水设备,以缓解黄山风景区水生态承载压力.%In the 21st century, controls on contamination emission have transformed from the simple concentration control to the combination with concentration and total amount control. But tourism research on water ecological carrying capacity remains concentrated on the concentration control. Water is one of the most important environmental factors in Huangshan resort. Adding water supply can meet the need of an increasing number of visi-tors. However, concomitant wastewater put tremendous pressure on water ecological car-rying capacity. Taking BOD5 as an influencing factor of water quality, the paper calculates daily average and annual capacities in Xiaoyaoxi, Chengxiangyuan, Lianhuagou and Danxi-axi water bodies during high-flow period, normal water period and low-flow period. Theconclusions are: (1) In general, under the premise of sewage discharge up to standard in the Huangshan resort, four major pollutant-holding water bodies can carry sewage dis-charge from now to 2010. However, after 2010, these four water bodies cannot satisfy sewage discharge the need of and the carrying capacity is saturated. (2) The spatial distri-bution is uneven in the water ecological carrying capacity. Xiaoyaoxi and Chengxiangyuan have relatively high waste load allocations than Lianhuagou and Danxiaxi. But the sites a-round Xiaoyaoxi and Danxiaxi have greater water demand, which lead to supersaturation of water ecological carrying capacity in the middle

Estimation of Parameters Obtained by Electrochemical Impedance Spectroscopy on Systems Containing High Capacities

Directory of Open Access Journals (Sweden)

Mirjana Rajčić Vujasinović

2009-09-01

Full Text Available Electrochemical systems with high capacities demand devices for electrochemical impedance spectroscopy (EIS with ultra-low frequencies (in order of mHz, that are almost impossible to accomplish with analogue techniques, but this becomes possible by using a computer technique and accompanying digital equipment. Recently, an original software and hardware for electrochemical measurements, intended for electrochemical systems exhibiting high capacities, such as supercapacitors, has been developed. One of the included methods is EIS. In this paper, the method of calculation of circuit parameters from an EIS curve is described. The results of testing on a physical model of an electrochemical system, constructed of known elements (including a 1.6 F capacitor in a defined arrangement, proved the validity of the system and the method.

A micro-structured Si-based electrodes for high capacity electrical double layer capacitors

International Nuclear Information System (INIS)

Krikscikas, Valdas; Oguchi, Hiroyuki; Hara, Motoaki; Kuwano, Hiroki; Yanazawa, Hiroshi

2014-01-01

We challenged to make basis for Si electrodes of electric double layer capacitors (EDLC) used as a power source of micro-sensor nodes. Mcroelectromechanical systems (MEMS) processes were successfully introduced to fabricate micro-structured Si-based electrodes to obtain high surface area which leads to high capacity of EDLCs. Study of fundamental properties revealed that the microstructured electrodes benefit from good wettability to electrolytes, but suffer from electric resistance. We found that this problem can be solved by metal-coating of the electrode surface. Finally we build an EDLC consisting of Au-coated micro-structured Si electrodes. This EDLC showed capacity of 14.3 mF/cm 2 , which is about 530 times larger than that of an EDLC consisting of flat Au electrodes

Capacity Payments in Restructured Markets under Low and High Penetration Levels of Renewable Energy

Energy Technology Data Exchange (ETDEWEB)

Jenkin, Thomas [National Renewable Energy Lab. (NREL), Golden, CO (United States); Beiter, Philipp [National Renewable Energy Lab. (NREL), Golden, CO (United States); Margolis, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-02-11

remain in implementing capacity markets that provide both adequate operational and investment incentives, particularly under high-VRE scenarios with greater need for flexible capacity.

Damping Capacity of High Manganese Austenitic Stainless Steel with a Two Phase Mixed Structure of Martensite and Austenite

International Nuclear Information System (INIS)

Hwang, Tae Hyun; Kang, Chang-Yong

2013-01-01

The damping capacity of high manganese austenitic stainless steel with a two phase mixed structure of deformation-induced martensite and reversed austenite was studied. Reversed austenite with an ultra-fine grain size of less than 0.2 μm was obtained by reversion treatment. The two phase structure of deformation-induced martensite and reversed austenite was obtained by annealing treatment at a range of 500-700 °C and various times in cold rolled high manganese austenitic stainless steel. The damping capacity increased with an increasing annealing temperature and time. In high manganese stainless steel with the two phase mixed structure of martensite and austenite, the damping capacity decreased with an increasing volume fraction of deformation-induced martensite. Thus, the damping capacity was strongly affected by deformation-induced martensite. The results confirmed that austenitic stainless steel with a good combination of strength and damping capacity was obtained from the two phase mixed structure of austenite and martensite.

High Capacity Hydrogen Storage on Nanoporous Biocarbon

Science.gov (United States)

Burress, Jacob; Wood, Mikael; Gordon, Michael; Parilla, Phillip; Benham, Michael; Wexler, Carlos; Hawthorne, Fred; Pfeifer, Peter

2008-03-01

The Alliance for Collaborative Research in Alternative Fuel Technology (http://all-craft.missouri.edu) has been optimizing nanoporous biocarbon for high capacity hydrogen storage. The hydrogen storage was measured gravimetrically and volumetrically (Sievert's apparatus). These measurements have been validated by NREL and Hiden Isochema. Sample S-33/k, our current best performer, stores 73-91 g H2/kg carbon at 77 K and 47 bar, and 1.0-1.6 g H2/kg carbon at 293 K and 47 bar. Hydrogen isotherms run by Hiden Isochema have given experimental binding energies of 8.8 kJ/mol compared to the binding energy of graphite of 5 kJ/mol. Results from a novel boron doping technique will also be presented. The benefits and validity of using boron-doping on carbon will also be discussed.

High-Capacity Hydrogen-Based Green-Energy Storage Solutions For The Grid Balancing

Science.gov (United States)

D'Errico, F.; Screnci, A.

One of the current main challenges in green-power storage and smart grids is the lack of effective solutions for accommodating the unbalance between renewable energy sources, that offer intermittent electricity supply, and a variable electricity demand. Energy management systems have to be foreseen for the near future, while they still represent a major challenge. Integrating intermittent renewable energy sources, by safe and cost-effective energy storage systems based on solid state hydrogen is today achievable thanks to recently some technology breakthroughs. Optimized solid storage method made of magnesium-based hydrides guarantees a very rapid absorption and desorption kinetics. Coupled with electrolyzer technology, high-capacity storage of green-hydrogen is therefore practicable. Besides these aspects, magnesium has been emerging as environmentally friend energy storage method to sustain integration, monitoring and control of large quantity of GWh from high capacity renewable generation in the EU.

Endurance capacity of mice selectively bred for high voluntary wheel running.

Science.gov (United States)

Meek, Thomas H; Lonquich, Brian P; Hannon, Robert M; Garland, Theodore

2009-09-15

Mice from four lines bred for high voluntary wheel activity run approximately 3-fold more revolutions per day and have elevated maximal oxygen consumption during forced treadmill exercise, as compared with four unselected control (C) lines. We hypothesized that these high runner (HR) lines would have greater treadmill endurance-running capacity. Ninety-six mice from generation 49 were familiarized with running on a motorized treadmill for 3 days. On days 4 and 5, mice were given an incremental speed test (starting at 20 m min(-1), increased 1.5 m min(-1) every 2 min) and endurance was measured as the total time or distance run to exhaustion. Blood samples were taken to measure glucose and lactate concentrations at rest during the photophase, during peak nightly wheel running, and immediately following the second endurance test. Individual differences in endurance time were highly repeatable between days (r=0.79), and mice tended to run longer on the second day (paired t-test, Pwheel running and treadmill endurance differed between the sexes, reinforcing previous studies that indicate sex-specific responses to selective breeding. HR mice appear to have a higher endurance capacity than reported in the literature for inbred strains of mice or transgenics intended to enhance endurance.

Research on tourism environmental carrying capacity of island tourist destination---A case study of Shanghai Chongming island%岛屿型旅游目的地旅游环境承载力研究--以上海崇明岛为例

Institute of Scientific and Technical Information of China (English)

刘世栋; 高峻

2014-01-01

以上海崇明岛为例，以长江隧桥贯通以及上海世博会为人类活动影响驱动因子，从时空角度选择旅游环境承载力评价模型，研究人类活动对岛屿型旅游目的地的影响以及崇明岛旅游业发展限制因子的变化。研究结果表明：崇明岛内水环境以及宾馆接待能力良好；入岛交通从以轮渡水上交通为主演变为隧桥陆上交通为主，隧桥陆上交通在“井喷式”旅游后逐步减压，但旅游旺季入岛交通限制因子也从轮渡水上交通变为隧桥陆上交通；崇明岛旅游发展的最大限制因子目前是旅游旺季的游客接待能力以及岛屿内部固体废弃物的清运能力。%Based on the spatial and temporal tourism environmental carrying capacity assessment model,taking the Yangtze River tunnel bridge linking and the EXPO as the human activity driv-ing factors,the impacts of human activity on the island-tourist destination and the limiting factors for the tourism industry development of Shanghai Chongming island are studied.The results showed that hotel reception and water carrying capacity can meet the needs of tourists;The out-land traffic had changed from ferry boat to bridge-road traffic,and the carrying capacity of road traffic gradually decompressed after “spurt tourism”,but it still was one of the limited factors in its′peak season.At last,the biggest limited factors of tourism industry were tourist reception carrying capacity in peak season and the removal capacity of solid waste for Chongming island.

Oxygen carrying perfluorochemical emulsion as an adjuvant to radiation therapy

International Nuclear Information System (INIS)

Teicher, B.A.; Rose, C.M.

1984-01-01

The potential of a perfluorochemical emulsion which as an excellent carrying capacity for oxygen to enhance the ability of radiation therapy to delay the growth of Lewis lung tumor was examined. There was a highly significant effect produced by the addition of perfluorochemical emulsion and carbogen breathing in combination with irradiation. With single dose x-ray treatment the dose of perfluorochemical emulsion was varied from 0.05-0.6 ml addition to the blood volume of the animals. The dose response effect was very broad peaking at 0.3-0.4 ml which gave a dose modifying effect of 2.8 +- 0.6 with 1000 rad of x-rays. The addition of 0.3 ml of perfluorochemical free annex solution with carbogen breathing produced a small enhancement in tumor growth delay addition of the same volume of the complete emulsion increased the tumor growth delay time about 3-fold compared to the annex solution. When the perfluorochemical emulsion was added to a fractionated course of radiation therapy a dose modifying effect of 1.8 +- 0.3 was obtained. Oxygen carrying perfluorochemical emulsions may provide a nontoxic clinically useful means of increasing the effectiveness of radiation therapy and of certain chemotherapeutic agents

An MGF-based capacity analysis of equal gain combining over fading channels

KAUST Repository

Yilmaz, Ferkan; Alouini, Mohamed-Slim

2010-01-01

Exact average capacity results for L-branch coherent equal-gain combining (EGC) in correlated and uncorrelated fading channels are not known. This paper develops a novel framework (approach) for capacity analysis of L-branch EGC in generalized fading channels. In addition, Gamma shadowed generalized Nakagami-m fading model is proposed in order to statistically model the fading environments in high frequencies such as 60 GHz and above. Some simulations are carried out and then the obtained results are accentuated by means of numerical analysis based on the proposed framework. Numerical and simulation results, performed to verify the correctness of the proposed framework, are in perfect agreement. ©2010 IEEE.

An MGF-based capacity analysis of equal gain combining over fading channels

KAUST Repository

Yilmaz, Ferkan

2010-09-01

Exact average capacity results for L-branch coherent equal-gain combining (EGC) in correlated and uncorrelated fading channels are not known. This paper develops a novel framework (approach) for capacity analysis of L-branch EGC in generalized fading channels. In addition, Gamma shadowed generalized Nakagami-m fading model is proposed in order to statistically model the fading environments in high frequencies such as 60 GHz and above. Some simulations are carried out and then the obtained results are accentuated by means of numerical analysis based on the proposed framework. Numerical and simulation results, performed to verify the correctness of the proposed framework, are in perfect agreement. ©2010 IEEE.

公共资源类旅游景区水环境承载力研究——以武汉市东湖风景区为例%Carrying capacity of water environment in public tourism resources: A case of East Lake scenic area in Wuhan

Institute of Scientific and Technical Information of China (English)

黄璨; 邓宏兵; 李小帆; 李会琴

2013-01-01

The water environment in public tourism resources is affected by the socio-economic system and travel system.This paper builds a multi-target model of water environment carrying capacity by selecting an index system that consists of population,GDP,irrigated area,number of tourists,number of guesthouse day reception,total nitrogen (TP),chemical oxygen demand (COD) and biochemical oxygen demand (BOD).Shuiguohu Lake,Tanglinghu Lake and Guozhenghu Lake are selected as the sub-lakes of the east lake area to evaluate the water environmental carrying capacity,by adopting the Analytic Hierarchy Process (AHP) to determine the weight of indexes on water environmental carrying capacity of the East Lake scenic area.This paper also uses a typical model to calculate water environmental carrying capacity of East Lake scenic area in 2011.The results show that the irrigation area and GDP have exceeded the carrying standards,while population and tourism indicators are within the carrying capacity.All the indicators of water quality have exceeded the carrying standards.The scores for water environmental carrying capacity of Shuiguohu,Tanglinghu and Guozhenghu lake are 4.03,3.86 and 3.95 respectively,which are greatly overloaded.%公共资源类旅游景区水环境受到社会经济系统和旅游系统两方面影响,本文通过选取人口、GDP、灌溉面积、游客量、宾馆日接待人数、TP、COD、BOD等指标,构建水环境承载力多目标模型.同时,选取水果湖、汤菱湖和郭郑湖3个子湖对东湖风景区水环境承载力进行评价,并运用层次分析法(AHP)确定各指标对东湖风景区水环境承载力的权重,采用典型水环境承载力概念模型计算了2011年武汉市东湖风景区水环境承载力.结果表明,东湖风景区水资源承载力表现为灌溉面积和GDP承载度超标,而人口和旅游指标承载度未达到饱和,水质承载力各指标的承载度超标.水果湖、汤菱湖和郭郑湖的水�

Environmentally friendly and highly productive bi-component melt spinning of thermoregulated smart polymer fibres with high latent heat capacity

Directory of Open Access Journals (Sweden)

Ch. Cherif

2018-03-01

Full Text Available A stable and reproducible bi-component melt spinning process on an industrial scale incorporating Phase Change Material (PCM into textile fibres has been successfully developed and carried out using a melt spinning machine. The key factor for a successful bi-component melt spinning process is that a deep insight into the thermal and rheological behaviour of PCM using Difference Scanning Calorimetry (DSC, Thermogravimetric Analysis (TGA, and an oscillatory rheological investigation. PCM is very sensitive to the temperature and residence time of the melt spinning process. It is found that the optimal process temperature of PCM is 210 °C. The textile-physical properties and the morphology of the melt spun and further drawn bi-component core and sheath fibres (bico fibres were investigated and interpreted. The heat capacities of PCM incorporated in bico fibres were also determined by means of DSC. The melt spun bico fibres integrating PCM provide a high latent heat of up to 22 J/g, which is three times higher than that of state-of-the-art fibres, which were also obtained using the melt spinning process. Therefore, they have the potential to be used as smart polymer fibres for textile and other technical applications.

Radio-capacity of ecosystems

International Nuclear Information System (INIS)

Kultakhmedov, Yu.; Kultakhmedova-Vyshnyakova, V.

1997-01-01

This paper consider a universal approach to ecosystems of different types, based on representation of their radio-capacity. The concept of ecosystem includes reproduction of components (bio-productivity) and conditions such as maintaining of environment quality. Radio-capacity in the case of radionuclide pollution appears in accumulation and redistribution of radionuclides in the ecosystem. As a result the radionuclides are redistributed and buried in soil or lake bottom sediments. Estimation models for the radio-capacity of water and terrestrial ecosystems are represented. The calculations of the radio-capacity factor of water ecosystems are performed, and the high radio-capacity of a freshwater reservoir (F=0.6-0.8) and extremely high radio-capacity of a reservoir cascade (F c =0.99) is shown material from the Dnieper's cascade reservoirs. The methods of radio-capacity estimation of agroecosystems, wood and marine ecosystems are developed. (authors)

Optical intensity modulation direct detection versus heterodyne detection: A high-SNR capacity comparison

KAUST Repository

Chaaban, Anas

2016-09-15

An optical wireless communications system which employs either intensity-modulation and direct-detection (IM-DD) or heterodyne detection (HD) is considered. IM-DD has lower complexity and cost than HD, but on the other hand, has lower capacity. It is therefore interesting to investigate the capacity gap between the two systems. The main focus of this paper is to investigate this gap at high SNR. Bounds on this gap are established for two cases: between IM-DD and HD, and between IM-DD and an HD-PAM which is an HD system employing pulse-amplitude modulation (PAM). While the gap between IM-DD and HD increases as the signal-to-noise ratio (SNR) increases, the gap between IM-DD and an HD-PAM is upper bounded by a constant at high SNR. © 2015 IEEE.

Optical intensity modulation direct detection versus heterodyne detection: A high-SNR capacity comparison

KAUST Repository

Chaaban, Anas; Alouini, Mohamed-Slim

2016-01-01

An optical wireless communications system which employs either intensity-modulation and direct-detection (IM-DD) or heterodyne detection (HD) is considered. IM-DD has lower complexity and cost than HD, but on the other hand, has lower capacity. It is therefore interesting to investigate the capacity gap between the two systems. The main focus of this paper is to investigate this gap at high SNR. Bounds on this gap are established for two cases: between IM-DD and HD, and between IM-DD and an HD-PAM which is an HD system employing pulse-amplitude modulation (PAM). While the gap between IM-DD and HD increases as the signal-to-noise ratio (SNR) increases, the gap between IM-DD and an HD-PAM is upper bounded by a constant at high SNR. © 2015 IEEE.

Highly Porous Silicon Embedded in a Ceramic Matrix: A Stable High-Capacity Electrode for Li-Ion Batteries.

Science.gov (United States)

Vrankovic, Dragoljub; Graczyk-Zajac, Magdalena; Kalcher, Constanze; Rohrer, Jochen; Becker, Malin; Stabler, Christina; Trykowski, Grzegorz; Albe, Karsten; Riedel, Ralf

2017-11-28

We demonstrate a cost-effective synthesis route that provides Si-based anode materials with capacities between 2000 and 3000 mAh·g Si -1 (400 and 600 mAh·g composite -1 ), Coulombic efficiencies above 99.5%, and almost 100% capacity retention over more than 100 cycles. The Si-based composite is prepared from highly porous silicon (obtained by reduction of silica) by encapsulation in an organic carbon and polymer-derived silicon oxycarbide (C/SiOC) matrix. Molecular dynamics simulations show that the highly porous silicon morphology delivers free volume for the accommodation of strain leading to no macroscopic changes during initial Li-Si alloying. In addition, a carbon layer provides an electrical contact, whereas the SiOC matrix significantly diminishes the interface between the electrolyte and the electrode material and thus suppresses the formation of a solid-electrolyte interphase on Si. Electrochemical tests of the micrometer-sized, glass-fiber-derived silicon demonstrate the up-scaling potential of the presented approach.

Charge Modulation in Graphitic Carbon Nitride as a Switchable Approach to High-Capacity Hydrogen Storage.

Science.gov (United States)

Tan, Xin; Kou, Liangzhi; Tahini, Hassan A; Smith, Sean C

2015-11-01

Electrical charging of graphitic carbon nitride nanosheets (g-C4 N3 and g-C3 N4 ) is proposed as a strategy for high-capacity and electrocatalytically switchable hydrogen storage. Using first-principle calculations, we found that the adsorption energy of H2 molecules on graphitic carbon nitride nanosheets is dramatically enhanced by injecting extra electrons into the adsorbent. At full hydrogen coverage, the negatively charged graphitic carbon nitride achieves storage capacities up to 6-7 wt %. In contrast to other hydrogen storage approaches, the storage/release occurs spontaneously once extra electrons are introduced or removed, and these processes can be simply controlled by switching on/off the charging voltage. Therefore, this approach promises both facile reversibility and tunable kinetics without the need of specific catalysts. Importantly, g-C4 N3 has good electrical conductivity and high electron mobility, which can be a very good candidate for electron injection/release. These predictions may prove to be instrumental in searching for a new class of high-capacity hydrogen storage materials. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Stress distribution and pressure-bearing capacity of a high-pressure split-cylinder die with prism cavity

Science.gov (United States)

Zhao, Liang; Li, Mingzhe; Wang, Liyan; Qu, Erhu; Yi, Zhuo

2018-03-01

A novel high-pressure belt-type die with a split-type cylinder is investigated with respect to extending its lifetime and improving its pressure bearing capacity. Specifically, a tungsten carbide cylinder is split into several parts along the radial direction with a prism-type cavity. In this paper, the cylinders with different split numbers are chosen to study the stress distribution and compare them with the traditional belt-type die. The simulation results indicate that the split cylinder has much smaller stress than those in the belt-type cylinder, and the statistical analysis reveals that the split-pressure cylinder is able to bear higher pressure. Experimental tests also show that the high-pressure die with a split cylinder and prism cavity has a stronger pressure-bearing capacity than a belt-type die. The split cylinder has advantages of easy manufacturing, high pressure bearing capacity, and replaceable performance.

Mouse lung contains endothelial progenitors with high capacity to form blood and lymphatic vessels

Directory of Open Access Journals (Sweden)

Barleon Bernhard

2010-07-01

Full Text Available Abstract Background Postnatal endothelial progenitor cells (EPCs have been successfully isolated from whole bone marrow, blood and the walls of conduit vessels. They can, therefore, be classified into circulating and resident progenitor cells. The differentiation capacity of resident lung endothelial progenitor cells from mouse has not been evaluated. Results In an attempt to isolate differentiated mature endothelial cells from mouse lung we found that the lung contains EPCs with a high vasculogenic capacity and capability of de novo vasculogenesis for blood and lymph vessels. Mouse lung microvascular endothelial cells (MLMVECs were isolated by selection of CD31+ cells. Whereas the majority of the CD31+ cells did not divide, some scattered cells started to proliferate giving rise to large colonies (> 3000 cells/colony. These highly dividing cells possess the capacity to integrate into various types of vessels including blood and lymph vessels unveiling the existence of local microvascular endothelial progenitor cells (LMEPCs in adult mouse lung. EPCs could be amplified > passage 30 and still expressed panendothelial markers as well as the progenitor cell antigens, but not antigens for immune cells and hematopoietic stem cells. A high percentage of these cells are also positive for Lyve1, Prox1, podoplanin and VEGFR-3 indicating that a considerabe fraction of the cells are committed to develop lymphatic endothelium. Clonogenic highly proliferating cells from limiting dilution assays were also bipotent. Combined in vitro and in vivo spheroid and matrigel assays revealed that these EPCs exhibit vasculogenic capacity by forming functional blood and lymph vessels. Conclusion The lung contains large numbers of EPCs that display commitment for both types of vessels, suggesting that lung blood and lymphatic endothelial cells are derived from a single progenitor cell.

Changes in agriculture and abundance of snow geese affect carrying capacity of sandhill cranes in Nebraska

Science.gov (United States)

Pearse, A.T.; Krapu, G.L.; Brandt, D.A.; Kinzel, P.J.

2010-01-01

The central Platte River valley (CPRV) in Nebraska, USA, is a key spring-staging area for approximately 80 of the midcontinent population of sandhill cranes (Grus canadensis; hereafter cranes). Evidence that staging cranes acquired less lipid reserves during the 1990s compared to the late 1970s and increases in use of the CPRV by snow geese (Chen caerulescens) prompted us to investigate availability of waste corn and quantify spatial and temporal patterns of crane and waterfowl use of the region. We developed a predictive model to assess impacts of changes in availability of corn and snow goose abundance under past, present, and potential future conditions. Over a hypothetical 60-day staging period, predicted energy demand of cranes and waterfowl increased 87 between the late 1970s and 19982007, primarily because peak abundances of snow geese increased by 650,000 and cranes by 110,000. Compared to spring 1979, corn available when cranes arrived was 20 less in 1998 and 68 less in 1999; consequently, the area of cornfields required to meet crane needs increased from 14,464 ha in 1979 to 32,751 ha in 1998 and 90,559 ha in 1999. Using a pooled estimate of 88 kg/ha from springs 19981999 and 20052007, the area of cornfields needed to supply food requirements of cranes and waterfowl increased to 65,587 ha and was greatest in the eastern region of the CPRV, where an estimated 54 of cranes, 47 of Canada geese (Branta canadensis), 45 of greater white-fronted geese (Anser albifrons), and 46 of snow geese occurred during ground surveys. We estimated that a future reduction of 25 in available corn or cornfields would increase daily foraging flight distances of cranes by 2738. Crane use and ability of cranes to store lipid reserves in the CPRV could be reduced substantially if flight distance required to locate adequate corn exceeded a physiological maximum distance cranes could fly in search of food. Options to increase carrying capacity for cranes include increasing

About rats and jackfruit trees: modeling the carrying capacity of a Brazilian Atlantic Forest spiny-rat Trinomys dimidiatus (Günther, 1877 – Rodentia, Echimyidae – population with varying jackfruit tree (Artocarpus heterophyllus L. abundances

Directory of Open Access Journals (Sweden)

JHF Mello

Full Text Available We carried out a six-year study aimed at evaluating if and how a Brazilian Atlantic Forest small mammal community responded to the presence of the invasive exotic species Artocarpus heterophyllus, the jackfruit tree. In the surroundings of Vila Dois Rios, Ilha Grande, RJ, 18 grids were established, 10 where the jackfruit tree was present and eight were it was absent. Previous results indicated that the composition and abundance of this small mammal community were altered by the presence and density of A. heterophyllus. One observed effect was the increased population size of the spiny-rat Trinomys dimidiatus within the grids where the jackfruit trees were present. Therefore we decided to create a mathematical model for this species, based on the Verhulst-Pearl logistic equation. Our objectives were i to calculate the carrying capacity K based on real data of the involved species and the environment; ii propose and evaluate a mathematical model to estimate the population size of T. dimidiatus based on the monthly seed production of jackfruit tree, Artocarpus heterophyllus and iii determinate the minimum jackfruit tree seed production to maintain at least two T. dimidiatus individuals in one study grid. Our results indicated that the predicted values by the model for the carrying capacity K were significantly correlated with real data. The best fit was found considering 20~35% energy transfer efficiency between trophic levels. Within the scope of assumed premises, our model showed itself to be an adequate simulator for Trinomys dimidiatus populations where the invasive jackfruit tree is present.

Amine-Functionalized Amino Acid-based Ionic Liquids as Efficient and High-Capacity Absorbents for CO2

DEFF Research Database (Denmark)

Shunmugavel, Saravanamurugan; Kunov-Kruse, Andreas Jonas; Fehrmann, Rasmus

2014-01-01

Ionic liquids (ILs) comprised of ammonium cations and anions of naturally occurring amino acids containing an additional amine group (e.g., lysine, histidine, asparagine, and glutamine) were examined as high-capacity absorbents for CO2. An absorption capacity of 2.1 mol CO2 per mol of IL (3.5 mol...

Titanium oxynitride thin films as high-capacity and high-rate anode materials for lithium-ion batteries

Energy Technology Data Exchange (ETDEWEB)

Chiu, Kuo-Feng [Department of Materials Science and Engineering, Feng Chia University, 100 Wenhwa Rd., Taichung 40724, Taiwan (China); Su, Shih-Hsuan, E-mail: minimono42@gmail.com [Department of Materials Science and Engineering, Feng Chia University, 100 Wenhwa Rd., Taichung 40724, Taiwan (China); Leu, Hoang-Jyh [Master' s Program of Green Energy Science and Technology, Feng Chia University, 100 Wenhwa Rd., Taichung 40724, Taiwan (China); Hsia, Chen-Hsien [Department of Materials Science and Engineering, Feng Chia University, 100 Wenhwa Rd., Taichung 40724, Taiwan (China)

2015-12-01

Titanium oxynitride (TiO{sub x}N{sub y}) was synthesized by reactive magnetron sputtering in a mixed N{sub 2}/O{sub 2}/Ar gas at ambient temperature. TiO{sub x}N{sub y} thin films with various amounts of nitrogen contents were deposited by varying the N{sub 2}/O{sub 2} ratios in the background gas. The synthesized TiO{sub x}N{sub y} films with different compositions (TiO{sub 1.837}N{sub 0.060,} TiO{sub 1.890}N{sub 0.068,} TiO{sub 1.865}N{sub 0.073}, and TiO{sub 1.882}N{sub 0.163}) all displayed anatase phase, except TiO{sub 1.882}N{sub 0.163}. The impedances and grain sizes showed obvious variations with the nitrogen contents. A wide potential window from 3.0 V to 0.05 V, high-rate charge–discharge testing, and long cycle testing were applied to investigate the performances of synthesized TiO{sub x}N{sub y} and pure TiO{sub 2} as anodes for lithium-ion batteries. These TiO{sub x}N{sub y} anodes can be cycled under high rates of 125 μA/cm{sup 2} (10 °C) because of the lower charge–transfer resistance compared with the TiO{sub 2} anode. At 10 °C the discharge capacity of the optimal TiO{sub x}N{sub y} composition is 1.5 times higher than that of pure TiO{sub 2}. An unexpectedly large reversible capacity of ~ 300 μAh/cm{sup 2} μm (~ 800 mAh/g) between 1.0 V and 0.05 V was recorded for the TiO{sub x}N{sub y} anodes. The TiO{sub x}N{sub y} anode was cycled (3.0 V to 0.05 V) at 10 °C over 300 times without capacity fading while delivering a capacity of ~ 150 μAh/cm{sup 2} μm (~ 400 mAh/g). - Highlights: • Titanium oxynitride (TiO{sub x}N{sub y}) thin films as anode materials were studied. • TiO{sub x}N{sub y} thin films with various amounts of nitrogen contents were studied{sub .} • High rate capability of TiO{sub x}N{sub y} was studied.

Radiation and temperature effects on electronic components investigated under the CSTI high capacity power project

International Nuclear Information System (INIS)

Schwarze, G.E.; Niedra, J.M.; Frasca, A.J.; Wieserman, W.R.

1993-01-01

The effects of nuclear radiation and high temperature environments must be fully known and understood for the electronic components and materials used in both the Power Conditioning and Control subsystem and the reactor Instrumentation and Control subsystem of future high capacity nuclear space power systems. This knowledge is required by the designer of these subsystems in order to develop highly reliable, long-life power systems for future NASA missions. A review and summary of the experimental results obtained for the electronic components and materials investigated under the power management element of the CSTI high capacity power project will be presented in this paper: (1) Neutron, gamma ray, and temperature effects on power semiconductor switches, (2) Temperature and frequency effects on soft magnetic materials; and (3) Temperature effects on rare-earth permanent magnets

Radiation and temperature effects on electronic components investigated under the CSTI High Capacity Power Project

International Nuclear Information System (INIS)

Shwarze, G.E.; Wieserman, W.R.

1994-01-01

The effects of nuclear radiation and high temperature environments must be fully known and understood for the electronic components and materials used in both the Power Conditioning and Control subsystem and the reactor Instrumentation and Control subsystem of future high capacity nuclear space power systems. This knowledge is required by the designer of these subsystems in order to develop highly reliable, long-life power systems for future NASA missions. A review and summary of the experimental results obtained for the electronic components and materials investigated under the power management element of the CSTI high capacity power project will be presented in this paper: (1) Neutron, gamma ray, and temperature effects on power semiconductor switches, (2) Temperature and frequency effects on soft magnetic materials; and (3) Temperature effects on rare earth permanent magnets

High-Capacity Multi-Core Fibers for Space-Division Multiplexing

DEFF Research Database (Denmark)

Ye, Feihong

The transmission capacity of the present optical fiber communication systems based on time division multiplexing (TDM) and wavelength-division multiplexing (WDM) using single-mode fibers (SMFs) is reaching its limit of around 100 Tbit/s per fiber due to the fiber nonlinearities, fiber fuse...... phenomenon and the optical amplifier bandwidth. To meet the ever increasing global data traffic growth and to overcome the looming capacity crunch, a new multiplexing technology using new optical fibers is urgently needed. Space-division multiplexing (SDM) is a promising scheme to overcome the capacity limit...... of the present SMF-based systems. Among the proposed SDM schemes, the one based on uncoupled multi-core fibers (MCFs) having multiple cores in a mutual cladding has proven effective in substantially increasing the transmission capacity per fiber with least system complexity as demonstrated in several state...

Capacity Fading Mechanism of the Commercial 18650 LiFePO4-Based Lithium-Ion Batteries: An in Situ Time-Resolved High-Energy Synchrotron XRD Study.

Science.gov (United States)

Liu, Qi; Liu, Yadong; Yang, Fan; He, Hao; Xiao, Xianghui; Ren, Yang; Lu, Wenquan; Stach, Eric; Xie, Jian

2018-02-07

In situ high-energy synchrotron XRD studies were carried out on commercial 18650 LiFePO 4 cells at different cycles to track and investigate the dynamic, chemical, and structural changes in the course of long-term cycling to elucidate the capacity fading mechanism. The results indicate that the crystalline structural deterioration of the LiFePO 4 cathode and the graphite anode is unlikely to happen before capacity fades below 80% of the initial capacity. Rather, the loss of the active lithium source is the primary cause for the capacity fade, which leads to the appearance of inactive FePO 4 that is proportional to the absence of the lithium source. Our in situ HESXRD studies further show that the lithium-ion insertion and deinsertion behavior of LiFePO 4 continuously changed with cycling. For a fresh cell, the LiFePO 4 experienced a dual-phase solid-solution behavior, whereas with increasing cycle numbers, the dynamic change, which is characteristic of the continuous decay of solid solution behavior, is obvious. The unpredicted dynamic change may result from the morphology evolution of LiFePO 4 particles and the loss of the lithium source, which may be the cause of the decreased rate capability of LiFePO 4 cells after long-term cycling.

Optimising molecular diagnostic capacity for effective control of tuberculosis in high-burden settings.

Science.gov (United States)

Sabiiti, W; Mtafya, B; Kuchaka, D; Azam, K; Viegas, S; Mdolo, A; Farmer, E C W; Khonga, M; Evangelopoulos, D; Honeyborne, I; Rachow, A; Heinrich, N; Ntinginya, N E; Bhatt, N; Davies, G R; Jani, I V; McHugh, T D; Kibiki, G; Hoelscher, M; Gillespie, S H

2016-08-01

The World Health Organization's 2035 vision is to reduce tuberculosis (TB) associated mortality by 95%. While low-burden, well-equipped industrialised economies can expect to see this goal achieved, it is challenging in the low- and middle-income countries that bear the highest burden of TB. Inadequate diagnosis leads to inappropriate treatment and poor clinical outcomes. The roll-out of the Xpert(®) MTB/RIF assay has demonstrated that molecular diagnostics can produce rapid diagnosis and treatment initiation. Strong molecular services are still limited to regional or national centres. The delay in implementation is due partly to resources, and partly to the suggestion that such techniques are too challenging for widespread implementation. We have successfully implemented a molecular tool for rapid monitoring of patient treatment response to anti-tuberculosis treatment in three high TB burden countries in Africa. We discuss here the challenges facing TB diagnosis and treatment monitoring, and draw from our experience in establishing molecular treatment monitoring platforms to provide practical insights into successful optimisation of molecular diagnostic capacity in resource-constrained, high TB burden settings. We recommend a holistic health system-wide approach for molecular diagnostic capacity development, addressing human resource training, institutional capacity development, streamlined procurement systems, and engagement with the public, policy makers and implementers of TB control programmes.

Towards green high capacity optical networks

Science.gov (United States)

Glesk, I.; Mohd Warip, M. N.; Idris, S. K.; Osadola, T. B.; Andonovic, I.

2011-09-01

The demand for fast, secure, energy efficient high capacity networks is growing. It is fuelled by transmission bandwidth needs which will support among other things the rapid penetration of multimedia applications empowering smart consumer electronics and E-businesses. All the above trigger unparallel needs for networking solutions which must offer not only high-speed low-cost "on demand" mobile connectivity but should be ecologically friendly and have low carbon footprint. The first answer to address the bandwidth needs was deployment of fibre optic technologies into transport networks. After this it became quickly obvious that the inferior electronic bandwidth (if compared to optical fiber) will further keep its upper hand on maximum implementable serial data rates. A new solution was found by introducing parallelism into data transport in the form of Wavelength Division Multiplexing (WDM) which has helped dramatically to improve aggregate throughput of optical networks. However with these advancements a new bottleneck has emerged at fibre endpoints where data routers must process the incoming and outgoing traffic. Here, even with the massive and power hungry electronic parallelism routers today (still relying upon bandwidth limiting electronics) do not offer needed processing speeds networks demands. In this paper we will discuss some novel unconventional approaches to address network scalability leading to energy savings via advance optical signal processing. We will also investigate energy savings based on advanced network management through nodes hibernation proposed for Optical IP networks. The hibernation reduces the network overall power consumption by forming virtual network reconfigurations through selective nodes groupings and by links segmentations and partitionings.

Effect of high energy electron beam (10 MeV) on specific heat capacity of low-density polyethylene/hydroxyapatite nano-composite

Energy Technology Data Exchange (ETDEWEB)

Soltani, Z., E-mail: zhr_soltani@yahoo.com [Health Physics and Radiation Dosimetry Research Laboratory, Department of Energy Engineering and Physics, Amirkabir University of Technology, Tehran (Iran, Islamic Republic of); Ziaie, F. [Radiation Application Research School, Nuclear Science & Technology Research Institute, Tehran (Iran, Islamic Republic of); Ghaffari, M. [Polymer Group, Golestan University, Golestan (Iran, Islamic Republic of); Beigzadeh, A.M. [Radiation Application Research School, Nuclear Science & Technology Research Institute, Tehran (Iran, Islamic Republic of)

2017-02-01

In the present work, thermal properties of low density polyethylene (LDPE) and its nano composites are investigated. For this purpose LDPE reinforced with different weight percents of hydroxyapatite (HAP) powder which was synthesized via hydrolysis method are produced. The samples were irradiated with 10 MeV electron beam at doses of 75 to 250 kGy. Specific heat capacity measurement have been carried out at different temperatures, i.e. 25, 50, 75 and 100 °C using modulated temperature differential scanning calorimetry (MTDSC) apparatus and the effect of three parameters include of temperature, irradiation dose and the amount of HAP nano particles as additives on the specific heat capacity of PE/HAP have been investigated precisely. The MTDSC results indicate that the specific heat capacity have decreased by addition of nano sized HAP as reinforcement for LDPE. On the other hand, the effect of radiation dose is reduction in the specific heat capacity in all materials including LDPE and its nano composites. The HAP nano particles along with cross-link junctions due to radiation restrain the movement of the polymer chains in the vicinity of each particle and improve the immobility of polymer chains and consequently lead to reduction in specific heat capacity. Also, the obtained results confirm that the radiation effect on the specific heat capacity is more efficient than the reinforcing effect of nano-sized hydroxyapatite.

In Situ Activation of Nitrogen-Doped Graphene Anchored on Graphite Foam for a High-Capacity Anode.

Science.gov (United States)

Ji, Junyi; Liu, Jilei; Lai, Linfei; Zhao, Xin; Zhen, Yongda; Lin, Jianyi; Zhu, Yanwu; Ji, Hengxing; Zhang, Li Li; Ruoff, Rodney S

2015-08-25

We report the fabrication of a three-dimensional free-standing nitrogen-doped porous graphene/graphite foam by in situ activation of nitrogen-doped graphene on highly conductive graphite foam (GF). After in situ activation, intimate "sheet contact" was observed between the graphene sheets and the GF. The sheet contact produced by in situ activation is found to be superior to the "point contact" obtained by the traditional drop-casting method and facilitates electron transfer. Due to the intimate contact as well as the use of an ultralight GF current collector, the composite electrode delivers a gravimetric capacity of 642 mAh g(-1) and a volumetric capacity of 602 mAh cm(-3) with respect to the whole electrode mass and volume (including the active materials and the GF current collector). When normalized based on the mass of the active material, the composite electrode delivers a high specific capacity of up to 1687 mAh g(-1), which is superior to that of most graphene-based electrodes. Also, after ∼90 s charging, the anode delivers a capacity of about 100 mAh g(-1) (with respect to the total mass of the electrode), indicating its potential use in high-rate lithium-ion batteries.

Fabrication of high-capacity polyelectrolyte brush-grafted porous AAO-silica composite membrane via RAFT polymerization.

Science.gov (United States)

Song, Cunfeng; Wang, Meijie; Liu, Xin; Wang, He; Chen, Xiaoling; Dai, Lizong

2017-09-01

Surface-initiated reversible addition-fragmentation chain transfer (RAFT) polymerization has been utilized to fabricate high-capacity strong anion-exchange (AEX) membrane for the separation of protein. By means of RAFT polymerization, quaternized poly(3-(methacrylamidomethyl)-pyridine) brushes formed 3-dimensional nanolayers on the surface of porous anodic aluminum oxide (AAO)-silica composite membrane. The surface properties of the membranes were analyzed by SEM, water contact angle, ATR-FTIR, XPS and TGA. To investigate the adsorption performance, the new AEX membranes were applied to recover a model protein, ovalbumin (OVA). High adsorption capacities of 95.8mg/g membranes (static) and 65.3mg/g membranes (dynamic) were obtained at ambient temperature. In the further studies, up to 90% of the adsorbed OVA was efficiently eluted by using phosphate buffer-1M NaCl as elution medium. The successful separation of OVA with high purity from a mixture protein solution was also achieved by using the AEX membranes. The present study demonstrated that under mild reaction condition, RAFT polymerization can be used to fabricate ion-exchange membrane which has many remarkable features, such as high capacity and selectivity, easy elution and so on. Copyright © 2017. Published by Elsevier B.V.

Final Project Report for DOE/EERE High-Capacity and Low-Cost Hydrogen-Storage Sorbents for Automotive Applications

Energy Technology Data Exchange (ETDEWEB)

Zhou, Hong-Cai [Texas A & M Univ., College Station, TX (United States); Liu, Di-Jia [Texas A & M Univ., College Station, TX (United States)

2017-12-01

This report provides a review of the objectives, progress, and milestones of the research conducted during this project on the topic of developing innovative metal-organic frameworks (MOFs) and porous organic polymers (POPs) for high-capacity and low-cost hydrogen-storage sorbents in automotive applications.1 The objectives of the proposed research were to develop new materials as next-generation hydrogen storage sorbents that meet or exceed DOE’s 2017 performance targets of gravimetric capacity of 0.055 kg H₂/kg_system and volumetric capacity of 0.040 kg H₂/L_system at a cost of $400/kg H_{2 stored}. Texas A&M University (TAMU) and Argonne National Laboratory (ANL) collaborated in developing low-cost and high-capacity hydrogen-storage sorbents with appropriate stability, sorption kinetics, and thermal conductivity. The research scope and methods developed to achieve the project’s goals include the following: Advanced ligand design and synthesis to construct MOF sorbents with optimal hydrogen storage capacities, low cost and high stability; Substantially improve the hydrogen uptake capacity and chemical stability of MOF-based sorbents by incorporating high valent metal ions during synthesis or through the post-synthetic metal metathesis oxidation approach; Enhance sorbent storage capacity through material engineering and characterization; Generate a better understanding of the H₂-sorbent interaction through advanced characterization and simulation. Over the course of the project 5 different MOFs were developed and studied: PCN-250, PCN-12, PCN-12’, PCN-608 and PCN-609.2-3 Two different samples were submitted to the National Renewable Energy Laboratory (NREL) in order to validate their hydrogen adsorption capacity, PCN-250 and PCN-12. Neither of these samples reached the project’s Go/No-Go requirements but the data obtained did further prove the hypothesis that the presence of open metal

Research of the Tourism Destination Carrying Capacity---A Case Study of the Ancient City of Kaifeng Song Du Cultural Industry Park%旅游目的地容量测量研究--以开封宋都古城文化产业园区为例

Institute of Scientific and Technical Information of China (English)

孙慧娟

2016-01-01

随着旅游市场的快速发展和游客出游的不断增加，过多游客的涌入、景区超载拥堵现象不断出现。旅游容量作为旅游目的地规划开发的科学依据和景区管理的工具，其研究成为一个重要课题。依据木桶原理及限制性因子原理，选取空间容量、设施容量、生态容量和社会心理容量等作为旅游地容量指标，构建综合容量测量模型。以开封宋都古城文化产业园区为例，选取基本空间标准，分析得出产业园区日旅游容量为190484人次，年旅游容量69526660人次，并对产业园区旅游发展提出建议。%With the rapid development of the tourism market and the increasing of tourists ,the influx of too many tourists 、the scenic spots overload and congestions phenomenons appear constantly .Tourism carrying capacity is a scientific basis of tourism destination planning development and a tool of the scenic area management ,soit has become an important subject .Based on buckets effect and the principle of limiting factors , this paper selects space capacity , facilities capacity,ecological capacity and social psychological capacity as the basic indexes of tourism carrying capacity , and constructs comprehensive capacity measurement model.Then,this paper takes the ancient city of Kaifeng Song Du cultural industry park as an example,and selects basic space standards,analyzes and concludes that the tourism carrying capacity of industry park is 190484 person/time every-day,69526660 person/time every year,finally puts forward the proposal on its tourism development .

Preparation of grafted microspheres CPVA-g-PSSS and studies on their drug-carrying and colon-specific drug delivery properties

International Nuclear Information System (INIS)

Gao, Baojiao; Fang, Li; Men, Jiying; Zhang, Yanyan

2013-01-01

Sodium 4-styrene sulfonate (SSS) was graft-polymerized on the surfaces of crosslinked polyvinyl alcohol (CPVA) microspheres in a manner of surface-initiated graft-polymerization by using cerium salt-hydroxyl group redox initiation system, obtaining the grafted microspheres CPVA-g-PSSS. The chemical structure and physicochemical characters of CPVA-g-PSSS microspheres were fully characterized with infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and zeta potential determination. The aim of this work is to constitute a novel colon-specific drug delivery system via molecular design by using CPVA-g-PSSS microspheres as the drug-carrying material and by taking metronidazole (MTZ) as the model drug. The drug-carrying ability and mechanism of the grafted microspheres CPVA-g-PSSS for MTZ were investigated. Finally, in-vitro release tests for the drug-carrying microspheres were conducted. The experimental results show that in an acidic medium, the grafted microspheres CPVA-g-PSSS exhibit strong adsorption ability for MTZ by driving of electrostatic interaction, and have an adsorption capacity of 112 mg/g, displaying the high efficiency of drug-carrying. The in-vitro release behavior of the drug-carried microspheres is highly pH-sensitive. In the medium of pH = 1, the drug-carrying microspheres do not release the drug, whereas in the medium of pH = 7.4, a sudden delivery phenomenon of the drug will occur, displaying an excellent colon-specific drug delivery behavior. Highlights: ► A metronidazole colon-specific drug delivery was constituted using grafted polymeric microspheres. ► Grafted polymeric microspheres CPVA-g-PSSS were prepared via surface-initiated graft-polymerization. ► The release of the drug-carrying microspheres is highly pH-sensitive. ► The drug-carrying microspheres display an excellent colon-specific drug delivery behavior

Preparation of grafted microspheres CPVA-g-PSSS and studies on their drug-carrying and colon-specific drug delivery properties

Energy Technology Data Exchange (ETDEWEB)

Gao, Baojiao, E-mail: gaobaojiao@126.com [Department of Chemical Engineering, North University of China, Taiyuan 030051, People' s Republic of China (China); Fang, Li [School of Chemistry and Chemical engineering, Shanxi University, Taiyuan 030006 (China); Men, Jiying; Zhang, Yanyan [Department of Chemical Engineering, North University of China, Taiyuan 030051, People' s Republic of China (China)

2013-04-01

Sodium 4-styrene sulfonate (SSS) was graft-polymerized on the surfaces of crosslinked polyvinyl alcohol (CPVA) microspheres in a manner of surface-initiated graft-polymerization by using cerium salt-hydroxyl group redox initiation system, obtaining the grafted microspheres CPVA-g-PSSS. The chemical structure and physicochemical characters of CPVA-g-PSSS microspheres were fully characterized with infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and zeta potential determination. The aim of this work is to constitute a novel colon-specific drug delivery system via molecular design by using CPVA-g-PSSS microspheres as the drug-carrying material and by taking metronidazole (MTZ) as the model drug. The drug-carrying ability and mechanism of the grafted microspheres CPVA-g-PSSS for MTZ were investigated. Finally, in-vitro release tests for the drug-carrying microspheres were conducted. The experimental results show that in an acidic medium, the grafted microspheres CPVA-g-PSSS exhibit strong adsorption ability for MTZ by driving of electrostatic interaction, and have an adsorption capacity of 112 mg/g, displaying the high efficiency of drug-carrying. The in-vitro release behavior of the drug-carried microspheres is highly pH-sensitive. In the medium of pH = 1, the drug-carrying microspheres do not release the drug, whereas in the medium of pH = 7.4, a sudden delivery phenomenon of the drug will occur, displaying an excellent colon-specific drug delivery behavior. Highlights: ► A metronidazole colon-specific drug delivery was constituted using grafted polymeric microspheres. ► Grafted polymeric microspheres CPVA-g-PSSS were prepared via surface-initiated graft-polymerization. ► The release of the drug-carrying microspheres is highly pH-sensitive. ► The drug-carrying microspheres display an excellent colon-specific drug delivery behavior.

Vegetation Composition, Biomass Production, Carrying Capacity ...

African Journals Online (AJOL)

Acacia tortilis, Acacia nilotica, Acacia mellifera and Acacia seyal were the most dominant shrubs with scattered Caddaba rotundifolia, Caddaba furmisa, Seddera bagshawei, Tamarix nilotica, Dobera glabra and abundant Parthenium hysterophorus, Cissus rotundifolia and C. quadrangularis. The grass biomass estimated in ...

Nanoscale surface modification of Li-rich layered oxides for high-capacity cathodes in Li-ion batteries

Science.gov (United States)

Lan, Xiwei; Xin, Yue; Wang, Libin; Hu, Xianluo

2018-03-01

Li-rich layered oxides (LLOs) have been developed as a high-capacity cathode material for Li-ion batteries, but the structural complexity and unique initial charging behavior lead to several problems including large initial capacity loss, capacity and voltage fading, poor cyclability, and inferior rate capability. Since the surface conditions are critical to electrochemical performance and the drawbacks, nanoscale surface modification for improving LLO's properties is a general strategy. This review mainly summarizes the surface modification of LLOs and classifies them into three types of surface pre-treatment, surface gradient doping, and surface coating. Surface pre-treatment usually introduces removal of Li2O for lower irreversible capacity while surface doping is aimed to stabilize the structure during electrochemical cycling. Surface coating layers with different properties, protective layers to suppress the interface side reaction, coating layers related to structural transformation, and electronic/ionic conductive layers for better rate capability, can avoid the shortcomings of LLOs. In addition to surface modification for performance enhancement, other strategies can also be investigated to achieve high-performance LLO-based cathode materials.

Energetics of load carrying in Nepalese porters.

Science.gov (United States)

Bastien, Guillaume J; Schepens, Bénédicte; Willems, Patrick A; Heglund, Norman C

2005-06-17

Nepalese porters routinely carry head-supported loads equal to 100 to 200% of their body weight (Mb) for many days up and down steep mountain footpaths at high altitudes. Previous studies have shown that African women carry head-supported loads of up to 60% of their Mb far more economically than army recruits carrying equivalent loads in backpacks. Here we show that Nepalese porters carry heavier loads even more economically than African women. Female Nepalese porters, for example, carry on average loads that are 10% of their Mb heavier than the maximum loads carried by the African women, yet do so at a 25% smaller metabolic cost.

Improvement the Capacity of Cockcroft-Walton High Voltage Source from 300 kV/20 mA to 500 kV/20 mA for Accelerating Voltage of Electron Beam Machine

International Nuclear Information System (INIS)

Suprapto; Djasiman

2002-01-01

The improvement capacity of Cockcroft-Walton high voltage source from 300 kV/20 mA to 500 kV/mA has been carrying out. To improve the capacity of high voltage source was done by means of increasing the stage number of voltage multiplier from 11 to 18 and its output voltage measuring resistance. Each stage of voltage multiplier consists of 2 capacitors and 2 circuits of high voltage diode. This voltage multiplier is constructed using main components of high voltage capacitor and high voltage diode each of 0.22 μF/50 kV and UF 5408 respectively. To avoid stray discharge and corona it was provided with high voltage electrode and corona ring. The test result indicated that the output voltage obtained from 16 stages was 350 kV according to operating condition of 25 MΩ resistive load and first stage voltage of 28.5 kV with oscillator frequency of 24 Hz. That condition requires anode voltage and current of 5.5 kV and 2.5 A respectively. The no load test for 16 stages indicates 400 kV of output voltage and 28.5 kV first stage voltage. Efficiency of high voltage source was 48 % at 6.75 kW of output power. The expected test of 500 kV with 18 stages of voltage multiplier can not be carried out because of some restrictive of loading system. From the test result can be predicted that the output voltage of 500 kV with 18 stages of voltage multiplier requires 31.2 kV of first stage voltage. Then the expected high voltage source of Cockcroft-Walton is capable as accelerating voltage source for Electron Beam Machine with energy of 500 kV. (author)

Consumerism and the Sister Carrie's American Dream%Consumerism and the Sister Carrie''s American Dream

Institute of Scientific and Technical Information of China (English)

卢亚丽

2017-01-01

From the aspect of consumerism to this text analyze Sister Carrie's"American dream"destruction. The author wholly and deeply analyzes the embodiment of consumerism in Dreiser's Sister Carrie and Dreiser's outlook and values under the effect of consumerism. To prove that the reason for destruction of Carrie's American dream is consumerism.

High oil prices: A non-OPEC capacity game

International Nuclear Information System (INIS)

Osmundsen, Petter; Asche, Frank; Misund, Baard; Mohn, Klaus

2005-08-01

The current high oil price is partly due to low investments in the oil industry the last decade. According to economic theory, exploration and development of new oil and gas fields should respond positively to increasing petroleum prices. But since the late 1990s, financial analysts have focused strongly on short-term accounting return measures, like RoACE, for benchmarking and valuation of international oil and gas companies. Consequently, the demand for strict capital discipline among oil and gas companies may have reduced their willingness to invest for future reserves and production growth. Thus, we have experienced an unusual combination of high oil prices and low investment levels in exploration and development. In many ways, the oil companies' focus on RoACE, at the expense of reserve replacement, resembles an implicit co-ordination on low capacity among non-OPEC petroleum producers. This is a partial explanation of the current high oil prices. By examining actual parameters used by the financial markets in pricing of oil companies, we address the issue of whether the low investment outcome could represent a long-term equilibrium. This is hardly likely, as oil companies are made aware that stronger emphasis is put on reserve replacement. (Author)

Sodium bicarbonate and high-intensity-cycling capacity: variability in responses.

Science.gov (United States)

Saunders, Bryan; Sale, Craig; Harris, Roger C; Sunderland, Caroline

2014-07-01

To determine whether gastrointestinal (GI) distress affects the ergogenicity of sodium bicarbonate and whether the degree of alkalemia or other metabolic responses is different between individuals who improve exercise capacity and those who do not. Twenty-one men completed 2 cycling-capacity tests at 110% of maximum power output. Participants were supplemented with 0.3 g/kg body mass of either placebo (maltodextrin) or sodium bicarbonate (SB). Blood pH, bicarbonate, base excess, and lactate were determined at baseline, preexercise, immediately postexercise, and 5 min postexercise. SB supplementation did not significantly increase total work done (TWD; P = .16, 46.8 ± 9.1 vs 45.6 ± 8.4 kJ, d = 0.14), although magnitude-based inferences suggested a 63% likelihood of a positive effect. When data were analyzed without 4 participants who experienced GI discomfort, TWD (P = .01) was significantly improved with SB. Immediately postexercise blood lactate was higher in SB for the individuals who improved but not for those who did not. There were also differences in the preexercise-to-postexercise change in blood pH, bicarbonate, and base excess between individuals who improved and those who did not. SB improved high-intensity-cycling capacity but only with the exclusion of participants experiencing GI discomfort. Differences in blood responses suggest that SB may not be beneficial to all individuals. Magnitude-based inferences suggested that the exercise effects are unlikely to be negative; therefore, individuals should determine whether they respond well to SB supplementation before competition.

High-Capacity Micrometer-Sized Li 2 S Particles as Cathode Materials for Advanced Rechargeable Lithium-Ion Batteries

KAUST Repository

Yang, Yuan

2012-09-19

Li 2S is a high-capacity cathode material for lithium metal-free rechargeable batteries. It has a theoretical capacity of 1166 mAh/g, which is nearly 1 order of magnitude higher than traditional metal oxides/phosphates cathodes. However, Li 2S is usually considered to be electrochemically inactive due to its high electronic resistivity and low lithium-ion diffusivity. In this paper, we discover that a large potential barrier (∼1 V) exists at the beginning of charging for Li 2S. By applying a higher voltage cutoff, this barrier can be overcome and Li 2S becomes active. Moreover, this barrier does not appear again in the following cycling. Subsequent cycling shows that the material behaves similar to common sulfur cathodes with high energy efficiency. The initial discharge capacity is greater than 800 mAh/g for even 10 μm Li 2S particles. Moreover, after 10 cycles, the capacity is stabilized around 500-550 mAh/g with a capacity decay rate of only ∼0.25% per cycle. The origin of the initial barrier is found to be the phase nucleation of polysulfides, but the amplitude of barrier is mainly due to two factors: (a) charge transfer directly between Li 2S and electrolyte without polysulfide and (b) lithium-ion diffusion in Li 2S. These results demonstrate a simple and scalable approach to utilizing Li 2S as the cathode material for rechargeable lithium-ion batteries with high specific energy. © 2012 American Chemical Society.

Peculiarities of carrying capacity evaluations of cylindrical CFST columns with new type casing

Directory of Open Access Journals (Sweden)

Sinkovskaya Olena

2017-01-01

Full Text Available This paper deals with a cylindrical steel-concrete load-bearing unit. The feature of the unit is a steel mesh casing that is made from the expanded metal mesh. The optimal parameters of the suggested footing are determined taking into account anisotropy, i. e. different strength and rigidity in different directions that coincide and do not coincide with the direction of reinforcement. The optimal cell angle, when a casing deformation brings about maximum compression of a concrete core, is determined. Details for theoretical calculation of the bearing capacity of a cylindrical steel-concrete load-bearing unit are provided taking into consideration a complex three-dimensional structure of the suggested mesh casing. The validity of the calculations is confirmed by comparison them with the results of the Lira software package. The results of the calculations are provided in the form of the table showing the dependence of the adduced thickness of the plate on the longitudinal movement of the strip of the steel mesh casing. The dependencies to determine the adduced thickness of the mesh casing using the graphical method are provided for all the existing types of the mesh using concrete wedges or excluding them.

Cost optimization of load carrying thin-walled precast high performance concrete sandwich panels

DEFF Research Database (Denmark)

Hodicky, Kamil; Hansen, Sanne; Hulin, Thomas

2015-01-01

and HPCSP’s geometrical parameters as well as on material cost function in the HPCSP design. Cost functions are presented for High Performance Concrete (HPC), insulation layer, reinforcement and include labour-related costs. The present study reports the economic data corresponding to specific manufacturing......The paper describes a procedure to find the structurally and thermally efficient design of load-carrying thin-walled precast High Performance Concrete Sandwich Panels (HPCSP) with an optimal economical solution. A systematic optimization approach is based on the selection of material’s performances....... The solution of the optimization problem is performed in the computer package software Matlab® with SQPlab package and integrates the processes of HPCSP design, quantity take-off and cost estimation. The proposed optimization process outcomes in complex HPCSP design proposals to achieve minimum cost of HPCSP....

Government capacities and stakeholders: what facilitates ehealth legislation?

Science.gov (United States)

2014-01-01

Background Newly established high-technology areas such as eHealth require regulations regarding the interoperability of health information infrastructures and data protection. It is argued that government capacities as well as the extent to which public and private organizations participate in policy-making determine the level of eHealth legislation. Both explanatory factors are influenced by international organizations that provide knowledge transfer and encourage private actor participation. Methods Data analysis is based on the Global Observatory for eHealth - ATLAS eHealth country profiles which summarizes eHealth policies in 114 countries. Data analysis was carried out using two-component hurdle models with a truncated Poisson model for positive counts and a hurdle component model with a binomial distribution for zero or greater counts. Results The analysis reveals that the participation of private organizations such as donors has negative effects on the level of eHealth legislation. The impact of public-private partnerships (PPPs) depends on the degree of government capacities already available and on democratic regimes. Democracies are more responsive to these new regulatory demands than autocracies. Democracies find it easier to transfer knowledge out of PPPs than autocracies. Government capacities increase the knowledge transfer effect of PPPs, thus leading to more eHealth legislation. Conclusions All international regimes – the WHO, the EU, and the OECD – promote PPPs in order to ensure the construction of a national eHealth infrastructure. This paper shows that the development of government capacities in the eHealth domain has to be given a higher priority than the establishment of PPPs, since the existence of some (initial) capacities is the sine qua non of further capacity building. PMID:24410989

基于水环境承载力评价的产业选择——以扬州市北部沿湖地区为例%Selecting industries based on evaluation of the water environment's carrying capacity: a case study of the Northern Lakeside Region of Yangzhou City

Institute of Scientific and Technical Information of China (English)

张姗姗; 张落成; 董雅文; 杨永可

2017-01-01

and waterfront areas with " general" carrying capacity levels are appropriate for modem ecological farming.The areas between mid-stream and up-stream of rivers with poor "lower" and "lowest" carrying capacity are ideal to cultivate staple crops (rice,cotton,rape,wheat,soybeans,and corn).This area is the main source of agricultural and domestic pollutants.In addition,the suitability of the industrial system has significant feedback for the water environment's carrying capacity.More measures should be taken to strengthen protection for wetlands along the lakeside due to its high ecological sensitivity.Unlike traditional hydrologic methods (using field hydrological data and model),this study provides a new approach to quickly and conveniently assess water environment carrying capacity.The industrial orientation proposed here serves not only an academic and scientific purpose,but also provides important insights for the government to formulate plans for industrial development.%区域的产业发展与该区域的自然和社会经济因素密切相关,对于水网稠密地区,水环境承载力是影响产业结构和布局优化的重要自然因子之一.选择江苏省境内跨长江与淮河两大流域的典型水网密集区——扬州市北部沿湖(邵伯湖)地区为研究区,选取水网构成指数、水利设施调控指数和水质达标差距指数3个指标,评价研究区水环境承载能力,并探讨水环境承载力与不同产业结构的联系,为该地区产业结构布局和优化提供建议.结果表明研究区水环境承载力“高”、“较高”、“中等”、“较低”和“低”5个等级分别占研究区总面积的0.38％、21.74％、29.67％、13.65％和34.56％.根据研究区水环境承载力空间差异和水环境承载力与不同产业的联系,以选择生态涵养型产业为基本导向,以兼具开发适宜性和环境保护重要性为基本原则,提出应根据研究区水环境承载力水平不均衡的�

Core--strategy leading to high reversible hydrogen storage capacity for NaBH4.

Science.gov (United States)

Christian, Meganne L; Aguey-Zinsou, Kondo-François

2012-09-25

Owing to its high storage capacity (10.8 mass %), sodium borohydride (NaBH(4)) is a promising hydrogen storage material. However, the temperature for hydrogen release is high (>500 °C), and reversibility of the release is unachievable under reasonable conditions. Herein, we demonstrate the potential of a novel strategy leading to high and stable hydrogen absorption/desorption cycling for NaBH(4) under mild pressure conditions (4 MPa). By an antisolvent precipitation method, the size of NaBH(4) particles was restricted to a few nanometers (hydrogen at 400 °C. Further encapsulation of these nanoparticles upon reaction of nickel chloride at their surface allowed the synthesis of a core--shell nanostructure, NaBH(4)@Ni, and this provided a route for (a) the effective nanoconfinement of the melted NaBH(4) core and its dehydrogenation products, and (b) reversibility and fast kinetics owing to short diffusion lengths, the unstable nature of nickel borohydride, and possible modification of reaction paths. Hence at 350 °C, a reversible and steady hydrogen capacity of 5 mass % was achieved for NaBH(4)@Ni; 80% of the hydrogen could be desorbed or absorbed in less than 60 min, and full capacity was reached within 5 h. To the best of our knowledge, this is the first time that such performances have been achieved with NaBH(4). This demonstrates the potential of the strategy in leading to major advancements in the design of effective hydrogen storage materials from pristine borohydrides.

Development of high-capacity nickel-metal hydride batteries using superlattice hydrogen-absorbing alloys

Science.gov (United States)

Yasuoka, Shigekazu; Magari, Yoshifumi; Murata, Tetsuyuki; Tanaka, Tadayoshi; Ishida, Jun; Nakamura, Hiroshi; Nohma, Toshiyuki; Kihara, Masaru; Baba, Yoshitaka; Teraoka, Hirohito

New R-Mg-Ni (R: rare earths) superlattice alloys with higher-capacity and higher-durability than the conventional Mm-Ni alloys with CaCu 5 structure have been developed. The oxidation resistibility of the superlattice alloys has been improved by optimizing the alloy composition by such as substituting aluminum for nickel and optimizing the magnesium content in order to prolong the battery life. High-capacity nickel-metal hydride batteries for the retail market, the Ni-MH2500/900 series (AA size type 2500 mAh, AAA size type 900 mAh), have been developed and commercialized by using an improved superlattice alloy for negative electrode material.

Ambient-temperature high damping capacity in TiPd-based martensitic alloys

Energy Technology Data Exchange (ETDEWEB)

Xue, Dezhen [Multi-disciplinary Materials Research Center, Frontier Institute of Science and Technology, State Key Laboratory for Mechanical Behavior of Materials, Xi' an Jiaotong University, Xi' an 710049 (China); Theoretical Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Zhou, Yumei, E-mail: zhouyumei@mail.xjtu.edu.cn [Multi-disciplinary Materials Research Center, Frontier Institute of Science and Technology, State Key Laboratory for Mechanical Behavior of Materials, Xi' an Jiaotong University, Xi' an 710049 (China); Ding, Xiangdong [Multi-disciplinary Materials Research Center, Frontier Institute of Science and Technology, State Key Laboratory for Mechanical Behavior of Materials, Xi' an Jiaotong University, Xi' an 710049 (China); Otsuka, Kazuhiro [Ferroic Physics Group, National Institute for Materials Science, Tsukuba 305-0047, Ibaraki (Japan); Lookman, Turab [Theoretical Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Sun, Jun [Multi-disciplinary Materials Research Center, Frontier Institute of Science and Technology, State Key Laboratory for Mechanical Behavior of Materials, Xi' an Jiaotong University, Xi' an 710049 (China); Ren, Xiaobing [Multi-disciplinary Materials Research Center, Frontier Institute of Science and Technology, State Key Laboratory for Mechanical Behavior of Materials, Xi' an Jiaotong University, Xi' an 710049 (China); Ferroic Physics Group, National Institute for Materials Science, Tsukuba 305-0047, Ibaraki (Japan)

2015-04-24

Shape memory alloys (SMAs) have attracted considerable attention for their high damping capacities. Here we investigate the damping behavior of Ti{sub 50}(Pd{sub 50−x}D{sub x}) SMAs (D=Fe, Co, Mn, V) by dynamic mechanical analysis. We find that these alloys show remarkably similar damping behavior. There exists a sharp damping peak associated with the B2–B19 martensitic transformation and a high damping plateau (Q{sup −1}~0.02–0.05) over a wide ambient-temperature range (220–420 K) due to the hysteretic twin boundary motion. After doping hydrogen into the above alloys, a new relaxation-type damping peak appears in the martensite phase over 270–360 K. Such a peak is considered to originate from the interaction of hydrogen atoms with twin boundaries and the corresponding damping capacity (Q{sup −1}~0.05–0.09) is enhanced by roughly twice that of the damping plateau for each alloy. Moreover, the relaxation peaks are at higher temperatures for the TiPd-based alloys (270–370 K) than for the TiNi-based alloys (190–260 K). We discuss the influence of hydrogen diffusion, mobility of twin boundaries and hydrogen–twin boundary interaction on the temperature range of the relaxation peak. Our results suggest that a martensite, with appropriate values for twinning shear and hydrogen doping level, provides a route towards developing high damping SMAs for applications in desired temperature ranges.

Ambient-temperature high damping capacity in TiPd-based martensitic alloys

International Nuclear Information System (INIS)

Xue, Dezhen; Zhou, Yumei; Ding, Xiangdong; Otsuka, Kazuhiro; Lookman, Turab; Sun, Jun; Ren, Xiaobing

2015-01-01

Shape memory alloys (SMAs) have attracted considerable attention for their high damping capacities. Here we investigate the damping behavior of Ti 50 (Pd 50−x D x ) SMAs (D=Fe, Co, Mn, V) by dynamic mechanical analysis. We find that these alloys show remarkably similar damping behavior. There exists a sharp damping peak associated with the B2–B19 martensitic transformation and a high damping plateau (Q −1 ~0.02–0.05) over a wide ambient-temperature range (220–420 K) due to the hysteretic twin boundary motion. After doping hydrogen into the above alloys, a new relaxation-type damping peak appears in the martensite phase over 270–360 K. Such a peak is considered to originate from the interaction of hydrogen atoms with twin boundaries and the corresponding damping capacity (Q −1 ~0.05–0.09) is enhanced by roughly twice that of the damping plateau for each alloy. Moreover, the relaxation peaks are at higher temperatures for the TiPd-based alloys (270–370 K) than for the TiNi-based alloys (190–260 K). We discuss the influence of hydrogen diffusion, mobility of twin boundaries and hydrogen–twin boundary interaction on the temperature range of the relaxation peak. Our results suggest that a martensite, with appropriate values for twinning shear and hydrogen doping level, provides a route towards developing high damping SMAs for applications in desired temperature ranges

Final Report: DE- FC36-05GO15063, Fundamental Studies of Advanced High-Capacity, Reversible Metal Hydrides

Energy Technology Data Exchange (ETDEWEB)

Jensen, Craig [Univ. of Hawaii, Honolulu, HI (United States); McGrady, Sean [Univ. of New Brunswick, Fredericton NB (Canada); Severa, Godwin [Univ. of Hawaii, Honolulu, HI (United States); Eliseo, Jennifer [Univ. of Hawaii, Honolulu, HI (United States); Chong, Marina [Univ. of Hawaii, Honolulu, HI (United States)

2013-05-31

The project was component of the US DOE, Metal Hydride Center of Excellence (MHCoE). The Sandia National Laboratory led center was established to conduct highly collaborative and multi-disciplinary applied R&D to develop new reversible hydrogen storage materials that meet or exceed DOE/FreedomCAR 2010 and 2015 system targets for hydrogen storage materials. Our approach entailed a wide variety of activities ranging from synthesis, characterization, and evaluation of new candidate hydrogen storage materials; screening of catalysts for high capacity materials requiring kinetics enhancement; development of low temperature methods for nano-confinement of hydrides and determining its effects on the kinetics and thermodynamics of hydrides; and development of novel processes for the direct re-hydrogenation of materials. These efforts have resulted in several advancements the development of hydrogen storage materials. We have greatly extended the fundamental knowledge about the highly promising hydrogen storage carrier, alane (AlH₃), by carrying out the first crystal structure determinations and the first determination of the heats of dehydrogenation of β–AlH₃ and γ-AlD₃. A low-temperature homogenous organometallic approach to incorporation of Al and Mg based hydrides into carbon aerogels has been developed that that allows high loadings without degradation of the nano-porous scaffold. Nano-confinement was found to significantly improve the dehydrogenation kinetics but not effect the enthalpy of dehydrogenation. We conceived, characterized, and synthesized a novel class of potential hydrogen storage materials, bimetallic borohydrides. These novel compounds were found to have many favorable properties including release of significant amounts of hydrogen at moderate temperatures (75-190 º C). However, in situ IR studies in tandem with thermal gravimetric analysis have shown that about 0.5 equivalents of diborane are released during the

PV Hosting Capacity Analysis and Enhancement Using High Resolution Stochastic Modeling

Directory of Open Access Journals (Sweden)

Emilio J. Palacios-Garcia

2017-09-01

Full Text Available Reduction of CO2 emissions is a main target in the future smart grid. This goal is boosting the installation of renewable energy resources (RES, as well as a major consumer engagement that seeks for a more efficient utilization of these resources toward the figure of ‘prosumers’. Nevertheless, these resources present an intermittent nature, which requires the presence of an energy storage system and an energy management system (EMS to ensure an uninterrupted power supply. Moreover, network-related issues might arise due to the increasing power of renewable resources installed in the grid, the storage systems also being capable of contributing to the network stability. However, to assess these future scenarios and test the control strategies, a simulation system is needed. The aim of this paper is to analyze the interaction between residential consumers with high penetration of PV generation and distributed storage and the grid by means of a high temporal resolution simulation scenario based on a stochastic residential load model and PV production records. Results of the model are presented for different PV power rates and storage capacities, as well as a two-level charging strategy as a mechanism for increasing the hosting capacity (HC of the network.

Improvement of Metroliner Telephone Channel Capacity and Modeling of Telephone Channel Demands

Science.gov (United States)

1972-03-01

The channel capacity of the present Metroliner telephone system is analyzed and methods are proposed to increase that capacity without increasing the overall bandwidth. To determine the number of channels required, calculations have been carried out ...

Determination of the Temperature Dependence of Heat Capacity for Some Molecular Crystals of Nitro Compounds

Science.gov (United States)

Kovalev, Yu. M.; Kuropatenko, V. F.

2018-05-01

An analysis of the existing approximations used for describing the dependence of heat capacity at a constant volume on the temperature of a molecular crystal has been carried out. It is shown that the considered Debye and Einstein approximations do not enable one to adequately describe the dependence of heat capacity at a constant volume on the temperature of the molecular crystals of nitro compounds. This inference requires the development of special approximations that would describe both low-frequency and high-frequency parts of the vibrational spectra of molecular crystals. This work presents a universal dependence allowing one to describe the dependence of heat capacity at a constant volume on temperature for a number of molecular crystals of nitro compounds.

基于5A景区最大承载量和游客接待量的旅游供需关系模型研究%Study of Mathematical Model Between Tourism Supply and Demand Based on Relationship of the 5A Level Scenic Spots' Maximum Carrying Capacity and the Amount of the Tourists

Institute of Scientific and Technical Information of China (English)

刘静; 刘耀龙; 段锦

2017-01-01

旅游承载量是反映旅游供给能力的重要指标,游客接待量是衡量旅游需求状况的常用指标.在分析我国5A级景区最大承载量空间分异特征的基础上,对2014年各省市5A级景区日最大承载量和年游客接待量进行相关性和回归分析,构建基于景区承载量和游客接待量的旅游供需关系模型.结果表明:(1)5A级景区最大承载量和游客接待量之间存在显著的正相关关系;(2)旅游供需关系模型可由复合函数定量表征;(3)模型能够预测旅游供需变化,对旅游业发展具有一定的指示意义.%Tourism carrying capacity is an important index to reflect the tourism supply capacity, and the amount of the tourists is a common index to measure tourism demand. On the basis of the analysis of the spatial distribution characteristics of 5A level scenic spots' maximum carrying capacity, the paper carries out correlation and regression analysis about the 5A level scenic' maximum carrying capacity and the amount of the tourists. Sample data is calculated or statistical results of 31 provinces in 2014. Tourism supply and demand model is constructed based on the relationship between the 5A level scenic spots' maximum carrying capacity and the amount of the tourists. Results indicate: (1)There is a significant positive correlation between the 5A level scenic spot'maximum carrying capacity and the amount of tourists; (2)The model of tourism supply and demand relations can be quantitatively characterized by complex functions;(3)The model can predict the change of tourism supply and demand, which have referential meaning to the development of tourism.

Hybrid Heat Capacity - Moving Slab Laser Concept

International Nuclear Information System (INIS)

Stappaerts, E A

2002-01-01

A hybrid configuration of a heat capacity laser (HCL) and a moving slab laser (MSL) has been studied. Multiple volumes of solid-state laser material are sequentially diode-pumped and their energy extracted. When a volume reaches a maximum temperature after a ''sub-magazine depth'', it is moved out of the pumping region into a cooling region, and a new volume is introduced. The total magazine depth equals the submagazine depth times the number of volumes. The design parameters are chosen to provide high duty factor operation, resulting in effective use of the diode arrays. The concept significantly reduces diode array cost over conventional heat capacity lasers, and it is considered enabling for many potential applications. A conceptual design study of the hybrid configuration has been carried out. Three concepts were evaluated using CAD tools. The concepts are described and their relative merits discussed. Because of reduced disk size and diode cost, the hybrid concept may allow scaling to average powers on the order of 0.5 MW/module

Key technology studies of GY-20 and GY-40 High-capacity cobalt-60 transport casks

International Nuclear Information System (INIS)

Liu Huifang; Zhang Xin

2012-01-01

GY-20 and GY-40 high-capacity cobalt-60 transport casks are used to transport cobalt-60 industrial irradiators and cobalt-60 bundles. The radioactive contents have special features of high-activity and high residual heat, so only a few countries such as Canada, England and Russia have design capacity. The key technologies and corresponding solutions were studied for the design and manufacture of the cask taking into account the structural, thermal, mechanics and shield requests. A series of tests prove that the cask structure design, design criteria for lead coating structure and quality control measurements are reasonable and effective, and the cask shield integrity can be ensured for all conditions. The casks have ability to transport high-activity sealed sources safely, and the design of cask satisfies the requirement of design code and standard. It can provide reference for other B type package. (authors)

Capacity-speed relationships in prefrontal cortex.

Directory of Open Access Journals (Sweden)

Vivek Prabhakaran

Full Text Available Working memory (WM capacity and WM processing speed are simple cognitive measures that underlie human performance in complex processes such as reasoning and language comprehension. These cognitive measures have shown to be interrelated in behavioral studies, yet the neural mechanism behind this interdependence has not been elucidated. We have carried out two functional MRI studies to separately identify brain regions involved in capacity and speed. Experiment 1, using a block-design WM verbal task, identified increased WM capacity with increased activity in right prefrontal regions, and Experiment 2, using a single-trial WM verbal task, identified increased WM processing speed with increased activity in similar regions. Our results suggest that right prefrontal areas may be a common region interlinking these two cognitive measures. Moreover, an overlap analysis with regions associated with binding or chunking suggest that this strategic memory consolidation process may be the mechanism interlinking WM capacity and WM speed.

Extremely High Phosphate Sorption Capacity in Cu-Pb-Zn Mine Tailings.

Science.gov (United States)

Huang, Longbin; Li, Xiaofang; Nguyen, Tuan A H

2015-01-01

Elevated inorganic phosphate (Pi) concentrations in pore water of amended tailings under direct revegetation may cause toxicity in some native woody species but not native forbs or herb species, all of which are key constituents in target native plant communities for phytostabilizing base metal mine tailings. As a result, Pi sorption capacity has been quantified by a conventional batch procedure in three types of base metal mine tailings sampled from two copper (Cu)-lead (Pb)-zinc (Zn) mines, as the basis for Pi-fertiliser addition. It was found that the Pi-sorption capacity in the tailings and local soil was extremely high, far higher than highly weathered agricultural soils in literature, but similar to those of volcanic ash soils. The Langmuir P-sorption maximum was up to 7.72, 4.12, 4.02 and 3.62 mg P g-1 tailings, in the fresh tailings of mixed Cu-Pb-Zn streams (MIMTD7), the weathered tailings of mixed Cu-Pb-Zn streams (MIMTD5), EHM-TD (fresh Cu-stream, high magnetite content) and local soil (weathered shale and schist), respectively. Physicochemical factors highly correlated with the high Pi-sorption in the tailings were fine particle distribution, oxalate and dithionite-citrate-bicarbonate extractable Fe (FeO and Fed), oxalate-extractable Al and Mn, and the levels of soluble Cd and Zn, and total S and Fe. Large amounts of amorphous Fe oxides and oxyhydroxides may have been formed from the oxidation of pyritic materials and redox cycles of Fe-minerals (such as pyrite (FeS2), ankerite (Ca(Fe Mg)(CO3)2 and siderite (FeCO3), as indicated by the extractable FeO values. The likely formation of sparingly soluble Zn-phosphate in the Pb-Zn tailings containing high levels of Zn (from sphalerite ((Zn,Fe)S, ZnS, (Zn,Cd)S)) may substantially lower soluble Zn levels in the tailings through high rates of Pi-fertiliser addition. As a result, the possibility of P-toxicity in native plant species caused by the addition of soluble phosphate fertilizers would be minimal.

Deuterium isotope differences in 2-propanone (CH3)2CO/(CD3)2CO: a high-pressure sound-speed, density, and heat capacities study

International Nuclear Information System (INIS)

Szydlowski, J.; Gomes de Azevedo, R.; Rebelo, L.P.N.; Esperanca, J.M.S.S.; Guedes, H.J.R.

2005-01-01

A new high-pressure, non-intrusive ultrasonic microcell [J. Chem. Thermodyn. 36 (2004) 211-222] was used to carry out sound-speed measurements in deuteriated 2-propanone (acetone-d 6 ) in broad ranges of temperature (288 6 . (p, ρ, T) data for acetone-d 6 were also determined but in a narrower T, p range (298 to 333 K; 0.1 to 60 MPa). In this interval, several thermodynamic properties were thus determined, such as: isentropic (κ s ) and isothermal (κ T ) compressibility, isobaric thermal expansivity (α p ), isobaric (c p ) and isochoric (c v ) specific heat capacity, and the thermal pressure coefficient (γ v ). Comparisons with our data for acetone-h 6 enabled us to establish the magnitude and sign of deuterium isotope effects for identical properties. These effects are a consequence of distinct vibrational mode frequencies in an isotope-invariant force constants' field. Molar heat capacities and their isotope effects were theoretically determined by employing an Einstein-like model for the vibrational frequencies of acetone-h 6 and acetone-d 6

Generation Capacity Investments and High Levels of Renewables. The Impact of a German Capacity Market on Northwest Europe. Discussion paper

Energy Technology Data Exchange (ETDEWEB)

Ozdemir, O.; De Joode, J.; Koutstaal, P.R.; Van Hout, M. [ECN Policy Studies, Amsterdam (Netherlands)

2013-05-15

Presently, Northwest European centralised electricity markets are designed as 'energy-only' markets. In an energy-only market, the price received for electricity produced is set by the marginal generation unit. Potentially, the designs of these markets could leave the owners of these units with 'missing money': i.e. money that is required to recover investment cost. Further, increasing penetration of renewables could exacerbate this problem. Of all the different options available to tackle the 'missing money' problem, capacity mechanisms have attracted most of the attention in recent policy debates in Europe. This paper contributes to ongoing policy discussions by providing a quantitative analysis of the phenomena of 'missing money' and capacity mechanisms in Northwest Europe. Our analysis shows that in the case of energy-only markets with a much higher penetration of intermittent electricity sources such as wind and solar PV, the 'missing money' problem may be aggravated, because operating hours for peak and mid-merit order capacity will be considerably reduced. Furthermore, unilateral introduction of capacity mechanisms in integrated electricity markets can have considerable impacts on cross-border electricity flows and investment decisions. Stand-alone introduction of a capacity market in Germany will likely result in higher investments in Germany at the expense of lower investments outside Germany and an increase in net exports from Germany. A possible advantage of a unilateral capacity mechanism in Germany may be a reduction in super-peak prices in the larger market area. Thus, neighbouring countries may have the possibility to free ride on the increase in flexible capacity in Germany. However, this advantage is conditional and depends on sufficient availability of interconnection capacity necessary to be able to use this reserve capacity. Otherwise, security of supply might be more at risk if the German

Fast and simple high-capacity quantum cryptography with error detection.

Science.gov (United States)

Lai, Hong; Luo, Ming-Xing; Pieprzyk, Josef; Zhang, Jun; Pan, Lei; Li, Shudong; Orgun, Mehmet A

2017-04-13

Quantum cryptography is commonly used to generate fresh secure keys with quantum signal transmission for instant use between two parties. However, research shows that the relatively low key generation rate hinders its practical use where a symmetric cryptography component consumes the shared key. That is, the security of the symmetric cryptography demands frequent rate of key updates, which leads to a higher consumption of the internal one-time-pad communication bandwidth, since it requires the length of the key to be as long as that of the secret. In order to alleviate these issues, we develop a matrix algorithm for fast and simple high-capacity quantum cryptography. Our scheme can achieve secure private communication with fresh keys generated from Fibonacci- and Lucas- valued orbital angular momentum (OAM) states for the seed to construct recursive Fibonacci and Lucas matrices. Moreover, the proposed matrix algorithm for quantum cryptography can ultimately be simplified to matrix multiplication, which is implemented and optimized in modern computers. Most importantly, considerably information capacity can be improved effectively and efficiently by the recursive property of Fibonacci and Lucas matrices, thereby avoiding the restriction of physical conditions, such as the communication bandwidth.

Fast and simple high-capacity quantum cryptography with error detection

Science.gov (United States)

Lai, Hong; Luo, Ming-Xing; Pieprzyk, Josef; Zhang, Jun; Pan, Lei; Li, Shudong; Orgun, Mehmet A.

2017-04-01

Quantum cryptography is commonly used to generate fresh secure keys with quantum signal transmission for instant use between two parties. However, research shows that the relatively low key generation rate hinders its practical use where a symmetric cryptography component consumes the shared key. That is, the security of the symmetric cryptography demands frequent rate of key updates, which leads to a higher consumption of the internal one-time-pad communication bandwidth, since it requires the length of the key to be as long as that of the secret. In order to alleviate these issues, we develop a matrix algorithm for fast and simple high-capacity quantum cryptography. Our scheme can achieve secure private communication with fresh keys generated from Fibonacci- and Lucas- valued orbital angular momentum (OAM) states for the seed to construct recursive Fibonacci and Lucas matrices. Moreover, the proposed matrix algorithm for quantum cryptography can ultimately be simplified to matrix multiplication, which is implemented and optimized in modern computers. Most importantly, considerably information capacity can be improved effectively and efficiently by the recursive property of Fibonacci and Lucas matrices, thereby avoiding the restriction of physical conditions, such as the communication bandwidth.

Progress in development of high capacity magnetic HTS bearings

International Nuclear Information System (INIS)

Kummeth, P.; Nick, W.; Neumueller, H.-W.

2005-01-01

HTS magnetic bearings are inherently stable without an active feedback system. They provide low frictional losses, no wear and allow operation at high rotational speed without lubrication. So they are very promising for use in motors, generators and turbines. We designed and constructed an HTS radial bearing for use with a 400 kW HTS motor. It consists of alternating axially magnetized permanent magnet rings on the rotor and a segmented YBCO stator. Stator cooling is performed by liquid nitrogen, the temperature of the stator can be adjusted by varying the pressure in the cryogenic vessel. At 68 K maximum radial forces of more than 3.7 kN were found. These results range within the highest radial bearing capacities reported worldwide. The encouraging results lead us to develop a large heavy load HTS radial bearing. Currently a high magnetic gradient HTS bearing for a 4 MVA synchronous HTS generator is under construction

Salivary pH and buffering capacity in early and late human immunodeficiency virus infection.

Science.gov (United States)

Hegde, Mithra N; Malhotra, Amit; Hegde, Nidarsh D

2013-11-01

Human immunodeficiency virus (HIV) causes severe immunosuppression due to progressive decrease in the CD4 T lymphocyte cells during the course of the disease and this affects all the body systems including glandular secretions. A number of lesions affecting the salivary glands have been noted in HIV infection. The objective of this study was to evaluate the salivary pH and the buffering capacity in HIV positive individuals and comparing it with the HIV negative healthy individuals. The study was carried out on 200 HIV positive subjects aged 20-40 years, divided into two groups on the basis of CD4 count and 100 HIV negative healthy individuals as control group. Both unstimulated and stimulated saliva were collected and the pH and buffering capacity ascertained using the saliva check kit. (GC Asia Dental Pvt. Ltd., Singapore, 508724). All the three groups were compared using the ANOVA and it was found there was highly significant decrease in pH and buffering capacity with increase in immunosuppression. The intergroup comparison was carried out using the Tukey honestly significant difference (HSD) and the Chi square test. Group 1; CD4 count 200 showed a significant decrease in unstimulated salivary flow, stimulated salivary flow, and pH in comparison to HIV negative individuals; however, change in buffering capacity in Group 2 was not significant. There is a decrease in pH and buffering capacity in HIV infected patients. This decrease may be one of the factors responsible for increased caries in HIV infected population.

Surface and bulk modified high capacity layered oxide cathodes with low irreversible capacity loss

Science.gov (United States)

Manthiram, Arumugam (Inventor); Wu, Yan (Inventor)

2010-01-01

The present invention includes compositions, surface and bulk modifications, and methods of making of (1-x)Li[Li.sub.1/3Mn.sub.2/3]O.sub.2.xLi[Mn.sub.0.5-yNi.sub.0.5-yCo.sub.2- y]O.sub.2 cathode materials having an O3 crystal structure with a x value between 0 and 1 and y value between 0 and 0.5, reducing the irreversible capacity loss in the first cycle by surface modification with oxides and bulk modification with cationic and anionic substitutions, and increasing the reversible capacity to close to the theoretical value of insertion/extraction of one lithium per transition metal ion (250-300 mAh/g).

A high capacity FASTBUS multiple event buffer

International Nuclear Information System (INIS)

Appel, J.A.; Farr, W.D.; Kaplan, D.M.; Levit, L.B.; Napier, T.M.

1985-01-01

We have developed a front-end data acquisition and event buffering memory. This single-width FASTBUS module has a capacity of 256K X 32 bits plus parity. The module is dual ported, and its front panel ECLport accepts data at up to 20 MB/sec. It may also be written to and read from as a standard FASTBUS Slave. The module records events as variable length records. Each record is accepted or rejected via front panel control signal. Circuitry to automate FASTBUS record readout and record skip is provided. In its ''linear'' mode, the module may be used as a single pass list. Alternatively, in the ''circular'' mode, the module's internal read pointer can follow its write pointer continuously around the memory. Circular mode is well suited to handling of a continuous data stream. Modules may be linked for larger memory capacity

Development of high-capacity nickel-metal hydride batteries using superlattice hydrogen-absorbing alloys

International Nuclear Information System (INIS)

Yasuoka, Shigekazu; Magari, Yoshifumi; Murata, Tetsuyuki; Tanaka, Tadayoshi; Ishida, Jun; Nakamura, Hiroshi; Nohma, Toshiyuki; Kihara, Masaru; Baba, Yoshitaka; Teraoka, Hirohito

2006-01-01

New R-Mg-Ni (R: rare earths) superlattice alloys with higher-capacity and higher-durability than the conventional Mm-Ni alloys with CaCu 5 structure have been developed. The oxidation resistibility of the superlattice alloys has been improved by optimizing the alloy composition by such as substituting aluminum for nickel and optimizing the magnesium content in order to prolong the battery life. High-capacity nickel-metal hydride batteries for the retail market, the Ni-MH2500/900 series (AA size type 2500mAh, AAA size type 900mAh), have been developed and commercialized by using an improved superlattice alloy for negative electrode material. alized by using an improved superlattice alloy for negative electrode material. (author)

The UIC 406 capacity method used on single track sections

DEFF Research Database (Denmark)

Landex, Alex; Kaas, Anders H.; Jacobsen, Erik M.

2007-01-01

This paper describes the relatively new UIC 406 capacity method which is an easy and effective way of calculating capacity consumption on railway lines. However, it is possible to expound the method in different ways which can lead to different capacity consumptions. This paper describes the UIC...... 406 method for single track lines and how it is expounded in Denmark. Many capacity analyses using the UIC 406 capacity method for double track lines have been carried out and presented internationally but only few capacity analyses using the UIC 406 capacity method on single track lines have been...... presented. Therefore, the differences between capacity analysis for double track lines and single track lines are discussed in the beginning of this paper. Many of the principles of the UIC 406 capacity analyses on double track lines can be used on single track lines – at least when more than one train...

Uncertainty Analysis of Power Grid Investment Capacity Based on Monte Carlo

Science.gov (United States)

Qin, Junsong; Liu, Bingyi; Niu, Dongxiao

By analyzing the influence factors of the investment capacity of power grid, to depreciation cost, sales price and sales quantity, net profit, financing and GDP of the second industry as the dependent variable to build the investment capacity analysis model. After carrying out Kolmogorov-Smirnov test, get the probability distribution of each influence factor. Finally, obtained the grid investment capacity uncertainty of analysis results by Monte Carlo simulation.

A dual-mode operation overmoded coaxial millimeter-wave generator with high power capacity and pure transverse electric and magnetic mode output

Science.gov (United States)

Bai, Zhen; Zhang, Jun; Zhong, Huihuang

2016-04-01

An overmoded coaxial millimeter-wave generator with high power capacity and pure transverse electric and magnetic (TEM) mode output is designed and presented, by using a kind of coaxial slow wave structure (SWS) with large transversal dimension and small distance between inner and outer conductors. The generator works in dual-mode operation mechanism. The electron beam synchronously interacts with 7π/8 mode of quasi-TEM, at the meanwhile exchanges energy with 3π/8 mode of TM01. The existence of TM01 mode, which is traveling wave, not only increases the beam-wave interaction efficiency but also improves the extraction efficiency. The large transversal dimension of coaxial SWS makes its power capacity higher than that of other reported millimeter-wave devices and the small distance between inner and outer conductors allows only two azimuthally symmetric modes to coexist. The converter after the SWS guarantees the mode purity of output power. Particle-in-cell simulation shows that when the diode voltage is 400 kV and beam current is 3.8 kA, the generation of microwave at 32.26 GHz with an output power of 611 MW and a conversion efficiency of 40% is obtained. The power percentage carried by TEM mode reaches 99.7% in the output power.

Superior cycle performance and high reversible capacity of SnO2/graphene composite as an anode material for lithium-ion batteries.