Systems Level Approaches to Understanding and Manipulating Heterocyst Differentiation in Nostoc Punctiforme: Sites of Hydrogenase and Nitrogenase Synthesis and Activity

Energy Technology Data Exchange (ETDEWEB)

Meeks, John C. [University of California, Davis, CA (United States)

2015-04-02

predicted to be a protease, perhaps operating thorough stability of HetR; thus, the influence of HetF on transcription of a unique set of genes was unanticipated. These two proteins are also found in non-heterocyst-forming filamentous cyanobacteria and the results have implications on their other physiological role(s). The PatN protein is unique to heterocyst-forming cyanobacteria. Cytological analysis indicated PatN is present in only one of the two daughter cells following division, but is present in both cell less than 8 h after division. Microarray analysis indicated only five genes were differentially transcribed in the patN mutant compared to the wild type; three up-regulated genes that are known to influence heterocyst differentiation and two down-regulated genes that have an unassigned function. Mutational analyses indicted the two down-regulated genes do not have a distinct role in heterocyst differentiation. Thus, PatN only indirectly impacts transcription. These databases provide lists of differentially transcribed genes involved in nitrogen starvation and cellular differentiation that can be mined for detailed genetic analysis of the regulation of heterocyst formation and function for subsequent photo-biohydrogen production.

Phylogenetic diversity of hpnP, the hopanoid methylase, and its implications for 2-methylhopanoids as biomarkers

Science.gov (United States)

Ricci, J. N.; Coleman, M. L.; Osburn, M. R.; Sessions, A. L.; Spear, J. R.; Newman, D. K.

2011-12-01

Hopanoids are a class of sterols produced by bacteria. Their hydrocarbon skeletons are resistant to degradation making their diagenetic products, hopanes, attractive biomarkers. Particular attention has been paid to 2-methylhopanes, which have been found at discrete times and locations in Earth history as far back as 2,500 Myr. Previously, they were inferred to be markers of oxygenic photosynthesis in cyanobacteria, but the discovery of an anoxygenic phototroph, Rhodopseudomonas palustris TIE-1, capable of producing significant quantities of 2-methylbacteriohopanetetrol, the parent molecule of the fossil 2-methylhopane, challenged this interpretation. In this study, we sought to determine the diversity and origin of the enzyme responsible for methylating hopanoids, HpnP. To accomplish this task, we surveyed a diversity of Yellowstone hot springs using degenerate PCR primers and searched publically available metagenomic databases for hpnP-like sequences. The Yellowstone hot spring samples were dominated by cyanobacterial-like hpnP sequences, while the metagenomic data contained many hpnP-like sequences from a diversity of environments that grouped with all known hpnP-containing phyla. With these additional hpnP sequences, we will report updated phylogenetic trees that attempt to determine the origin of hpnP. Understanding the distribution of 2-methylhopanoid production throughout the tree of life and its origin is important to be able to use 2-methylhopanes as biomarkers for any particular taxonomic group.

Distributions of Heterocyst Glycolipids in Settling Particulate Matter Record Ecological and Environmental Parameters in a Tropical Lake

Science.gov (United States)

Meegan Kumar, D.; Hopmans, E.; S Sinninghe Damsté, J.; Schouten, S.; Bauersachs, T.; Werne, J. P.

2017-12-01

Temperature is a critical component of paleoenvironmental reconstructions, yet it is notoriously difficult to measure in terrestrial archives. Presented here is an investigation of unique glycolipids produced by heterocystous cyanobacteria, so-called heterocyst glycolipids (HGs), in the water column of Lake Malawi (East Africa). The goal of the study is to evaluate the potential of HGs to function as a paleotemperature proxy in tropical lacustrine environments. HGs in Lake Malawi were extracted from settling particulate matter (SPM) collected at bi-monthly intervals from 2011 - 2013. Sediment traps were moored in the metalimnion of both the north and south basins of the lake in order to evaluate the spatial and the temporal trends in lipid production and export. This study is the first to analyze HGs in SPM and contains the longest time-series of HG production in a natural environment to date. HGs are consistently present throughout the three-year study period, but maximum fluxes occur annually in December, coincident with the timing of cyanobacterial blooms in the lake. HGs in SPM appear to be sourced from living cyanobacteria populations, indicating rapid export of the lipids through the water column. Temperatures reconstructed with published HG-based indices, which are derived from the relative abundances of HG diols and triols to HG keto-(di)ols, do not accurately reflect the seasonal variability in measured surface water temperatures. Rather, the production of C28 HG keto-ols appears to be related to the timing of heterocyst differentiation. Heterocystous cyanobacteria in Lake Malawi may instead respond to growth temperatures by elongating the alkyl side chain of HG diols, as indicated by increases in the abundance of the C28 HG diol relative to the C26 HG diol with warmer surface water temperatures. Distributions of HGs thus may indeed provide a novel tool for paleotemperature reconstructions in tropical lakes.

Free and sulphurized hopanoids and highly branched isoprenoids in immature lacustrine oil shales

NARCIS (Netherlands)

Sinninghe Damsté, J.S.; Las Heras, F.X.C. de; Grimalt, J.O.; Lopez, J.F.; Albaiges, J.; Leeuw, J.W. de

1997-01-01

A study of the solvent extracts of four samples from two immature oil shales from Tertiary lacustrine basins, Ribesalbes and Campins (southern European rift system), deposited under reducing conditions, has allowed the identification of S-containing hopanoids and novel highly branched isoprenoids

Identification of Conserved and Potentially Regulatory Small RNAs in Heterocystous Cyanobacteria

Directory of Open Access Journals (Sweden)

Manuel eBrenes-Álvarez

2016-02-01

Full Text Available Small RNAs (sRNAs are a growing class of non-protein-coding transcripts that participate in the regulation of virtually every aspect of bacterial physiology. Heterocystous cyanobacteria are a group of photosynthetic organisms that exhibit multicellular behaviour and developmental alternatives involving specific transcriptomes exclusive of a given physiological condition or even a cell type. In the context of our ongoing effort to understand developmental decisions in these organisms we have undertaken an approach to the global identification of sRNAs. Using differential RNA-Seq we have previously identified transcriptional start sites for the model heterocystous cyanobacterium Nostoc sp. PCC 7120. Here we combine this dataset with a prediction of Rho-independent transcriptional terminators and an analysis of phylogenetic conservation of potential sRNAs among 89 available cyanobacterial genomes. In contrast to predictive genome-wide approaches, the use of an experimental dataset comprising all active transcriptional start sites (differential RNA-Seq facilitates the identification of bona fide sRNAs. The output of our approach is a dataset of predicted potential sRNAs in Nostoc sp. PCC 7120, with different degrees of phylogenetic conservation across the 89 cyanobacterial genomes analyzed. Previously described sRNAs appear among the predicted sRNAs, demonstrating the performance of the algorithm. In addition, new predicted sRNAs are now identified that can be involved in regulation of different aspects of cyanobacterial physiology, including adaptation to nitrogen stress, the condition that triggers differentiation of heterocysts (specialized nitrogen-fixing cells. Transcription of several predicted sRNAs that appear exclusively in the genomes of heterocystous cyanobacteria is experimentally verified by Northern blot. Cell-specific transcription of one of these sRNAs, NsiR8 (nitrogen stress-induced RNA 8, in developing heterocysts is also

Growth Characteristics of an Estuarine Heterocystous Cyanobacterium

NARCIS (Netherlands)

Guimarães, P.; Yunes, J.S.; Cretoiu, M.S.; Stal, L.J.

2017-01-01

A new estuarine filamentous heterocystous cyanobacterium was isolated from intertidal sediment of the Lagoa dos Patos estuary (Brazil). The isolate may represent a new genus related to Cylindrospermopsis. While the latter is planktonic, contains gas vesicles, and is toxic, the newly isolated strain

Transcription activation by NtcA and 2-oxoglutarate of three genes involved in heterocyst differentiation in the cyanobacterium Anabaena sp. strain PCC 7120.

Science.gov (United States)

Valladares, Ana; Flores, Enrique; Herrero, Antonia

2008-09-01

In Anabaena sp. strain PCC 7120, differentiation of heterocysts takes place in response to the external cue of combined nitrogen deprivation, allowing the organism to fix atmospheric nitrogen in oxic environments. NtcA, a global transcriptional regulator of cyanobacteria, is required for activation of the expression of multiple genes involved in heterocyst differentiation, including key regulators that are specific to the process. We have set up a fully defined in vitro system, which includes the purified Anabaena RNA polymerase, and have studied the effects of NtcA and its signaling effector 2-oxoglutarate on RNA polymerase binding, open complex formation, and transcript production from promoters of the hetC, nrrA, and devB genes that are activated by NtcA at different stages of heterocyst differentiation. Both RNA polymerase and NtcA could specifically bind to the target DNA in the absence of any effector. 2-Oxoglutarate had a moderate positive effect on NtcA binding, and NtcA had a limited positive effect on RNA polymerase recruitment at the promoters. However, a stringent requirement of both NtcA and 2-oxoglutarate was observed for the detection of open complexes and transcript production at the three investigated promoters. These results support a key role for 2-oxoglutarate in transcription activation in the developing heterocyst.

N-2 fixation by non-heterocystous cyanobacteria

NARCIS (Netherlands)

Bergman, B.; Gallon, J.R.; Rai, A.N.; Stal, L.J.

1997-01-01

Many, though not all, non-heterocystous cyanobacteria can fix N-2. However, very few strains can fix N-2 aerobically. Nevertheless, these organisms may make a substantial contribution to the global nitrogen cycle. In this general review, N-2 fixation by laboratory cultures and natural populations of

The hetC Gene Is a Direct Target of the NtcA Transcriptional Regulator in Cyanobacterial Heterocyst Development

Science.gov (United States)

Muro-Pastor, Alicia M.; Valladares, Ana; Flores, Enrique; Herrero, Antonia

1999-01-01

The heterocyst is the site of nitrogen fixation in aerobically grown cultures of some filamentous cyanobacteria. Heterocyst development in Anabaena sp. strain PCC 7120 is dependent on the global nitrogen regulator NtcA and requires, among others, the products of the hetR and hetC genes. Expression of hetC, tested by RNA- DNA hybridization, was impaired in an ntcA mutant. A nitrogen-regulated, NtcA-dependent putative transcription start point was localized at nucleotide −571 with respect to the hetC translational start. Sequences upstream from this transcription start point exhibit the structure of the canonical cyanobacterial promoter activated by NtcA, and purified NtcA protein specifically bound to a DNA fragment containing this promoter. Activation of expression of hetC during heterocyst development appears thus to be directly operated by NtcA. NtcA-mediated activation of hetR expression was not impaired in a hetC mutant, indicating that HetC is not an NtcA-dependent element required for hetR induction. PMID:10542167

Association of non-heterocystous cyanobacteria with crop plants

NARCIS (Netherlands)

Ahmed, M.; Stal, L.J.; Hasnain, S.

2010-01-01

Cyanobacteria have the ability to form associations with organisms from all domains of life, notably with plants, which they provide with fixed nitrogen, among other substances. This study was aimed at developing artificial associations between non-heterocystous cyanobacteria and selected crop

Relationships between the ABC-exporter HetC and peptides that regulate the spatiotemporal pattern of heterocyst distribution in Anabaena.

Directory of Open Access Journals (Sweden)

Laura Corrales-Guerrero

Full Text Available In the model cyanobacterium Anabaena sp. PCC 7120, cells called heterocysts that are specialized in the fixation of atmospheric nitrogen differentiate from vegetative cells of the filament in the absence of combined nitrogen. Heterocysts follow a specific distribution pattern along the filament, and a number of regulators have been identified that influence the heterocyst pattern. PatS and HetN, expressed in the differentiating cells, inhibit the differentiation of neighboring cells. At least PatS appears to be processed and transferred from cell to cell. HetC is similar to ABC exporters and is required for differentiation. We present an epistasis analysis of these regulatory genes and of genes, hetP and asr2819, successively downstream from hetC, and we have studied the localization of HetC and HetP by use of GFP fusions. Inactivation of patS, but not of hetN, allowed differentiation to proceed in a hetC background, whereas inactivation of hetC in patS or patS hetN backgrounds decreased the frequency of contiguous proheterocysts. A HetC-GFP protein is localized to the heterocysts and especially near their cell poles, and a putative HetC peptidase domain was required for heterocyst differentiation but not for HetC-GFP localization. hetP is also required for heterocyst differentiation. A HetP-GFP protein localized mostly near the heterocyst poles. ORF asr2819, which we denote patC, encodes an 84-residue peptide and is induced upon nitrogen step-down. Inactivation of patC led to a late spreading of the heterocyst pattern. Whereas HetC and HetP appear to have linked functions that allow heterocyst differentiation to progress, PatC may have a role in selecting sites of differentiation, suggesting that these closely positioned genes may be functionally related.

Specific role of the cyanobacterial PipX factor in the heterocysts of Anabaena sp. strain PCC 7120.

Science.gov (United States)

Valladares, Ana; Rodríguez, Virginia; Camargo, Sergio; Martínez-Noël, Giselle M A; Herrero, Antonia; Luque, Ignacio

2011-03-01

The PipX factor is a regulatory protein that seems to occur only in cyanobacteria. In the filamentous, heterocyst-forming Anabaena sp. strain PCC 7120, open reading frame (ORF) asr0485, identified as the pipX gene, is expressed mainly under conditions of combined-nitrogen deprivation dependent on the global N regulator NtcA and the heterocyst-specific regulator HetR. Primer extension and 5' rapid amplification of cDNA ends (RACE) analyses detected three transcription start points corresponding to a canonical NtcA-activated promoter (to which direct binding of NtcA was observed), an NtcA- and HetR-dependent promoter, and a consensus-type promoter, the last with putative -35 and -10 determinants. Activation of pipX took place in cells differentiating into heterocysts at intermediate to late stages of the process. Accordingly, disruption of pipX led to impaired diazotrophic growth, reduced nitrogenase activity, and impaired activation of the nitrogenase structural genes. The nitrogenase activity of the mutant was low under oxic conditions, likely resulting from inefficient protection against oxygen. In line with this, the activation of the coxB2A2C2 and coxB3A3C3 operons, encoding heterocyst-specific terminal respiratory oxidases responsible for internal oxygen removal, was deficient in the pipX mutant. Therefore, the Anabaena PipX factor shows a spatiotemporal specificity contributing to normal heterocyst function, including full activation of the nitrogenase structural genes and genes of the nitrogenase-protective features of the heterocyst.

Comparative study of thylakoid membranes in terminal heterocysts and vegetative cells from two cyanobacteria, Rivularia M-261 and Anabaena variabilis, by fluorescence and absorption spectral microscopy.

Science.gov (United States)

Nozue, Shuho; Katayama, Mitsunori; Terazima, Masahide; Kumazaki, Shigeichi

2017-09-01

Heterocyst is a nitrogen-fixing cell differentiated from a cell for oxygen-evolving photosynthesis (vegetative cell) in some filamentous cyanobacteria when fixed nitrogen (e.g., ammonia and nitrate) is limited. Heterocysts appear at multiple separated positions in a single filament with an interval of 10-20 cells in some genera (including Anabaena variabilis). In other genera, a single heterocyst appears only at the basal terminal in a filament (including Rivularia M-261). Such morphological diversity may necessitate different properties of heterocysts. However, possible differences in heterocysts have largely remained unexplored due to the minority of heterocysts among major vegetative cells. Here, we have applied spectroscopic microscopy to Rivularia and A. variabilis to analyze their thylakoid membranes in individual cells. Absorption and fluorescence spectral imaging enabled us to estimate concentrations and interconnections of key photosynthetic components like photosystem I (PSI), photosystem II (PSII) and subunits of light-harvesting phycobilisome including phycocyanin (PC). The concentration of PC in heterocysts of Rivularia is far higher than that of A. variabilis. Fluorescence quantum yield of PC in Rivularia heterocysts was found to be virtually the same as those in its vegetative cells, while fluorescence quantum yield of PC in A. variabilis heterocysts was enhanced in comparison with its vegetative cells. PSI concentration in the thylakoid membranes of heterocysts seems to remain nearly the same as those of the vegetative cells in both the species. The average stoichiometric ratio between PSI monomer and PC hexamer in Rivularia heterocysts is estimated to be about 1:1. Copyright © 2017 Elsevier B.V. All rights reserved.

Seasonal lake surface water temperature trends reflected by heterocyst glycolipid-based molecular thermometers

Science.gov (United States)

Bauersachs, T.; Rochelmeier, J.; Schwark, L.

2015-06-01

It has been demonstrated that the relative distribution of heterocyst glycolipids (HGs) in cultures of N2-fixing heterocystous cyanobacteria is largely controlled by growth temperature, suggesting a potential use of these components in paleoenvironmental studies. Here, we investigated the effect of environmental parameters (e.g., surface water temperatures, oxygen concentrations and pH) on the distribution of HGs in a natural system using water column filtrates collected from Lake Schreventeich (Kiel, Germany) from late July to the end of October 2013. HPLC-ESI/MS (high-performance liquid chromatography coupled to electrospray ionization-mass spectrometry) analysis revealed a dominance of 1-(O-hexose)-3,25-hexacosanediols (HG26 diols) and 1-(O-hexose)-3-keto-25-hexacosanol (HG26 keto-ol) in the solvent-extracted water column filtrates, which were accompanied by minor abundances of 1-(O-hexose)-3,27-octacosanediol (HG28 diol) and 1-(O-hexose)-3-keto-27-octacosanol (HG28 keto-ol) as well as 1-(O-hexose)-3,25,27-octacosanetriol (HG28 triol) and 1-(O-hexose)-3-keto-25,27-octacosanediol (HG28 keto-diol). Fractional abundances of alcoholic and ketonic HGs generally showed strong linear correlations with surface water temperatures and no or only weak linear correlations with both oxygen concentrations and pH. Changes in the distribution of the most abundant diol and keto-ol (e.g., HG26 diol and HG26 keto-ol) were quantitatively expressed as the HDI26 (heterocyst diol index of 26 carbon atoms) with values of this index ranging from 0.89 in mid-August to 0.66 in mid-October. An average HDI26 value of 0.79, which translates into a calculated surface water temperature of 15.8 ± 0.3 °C, was obtained from surface sediments collected from Lake Schreventeich. This temperature - and temperatures obtained from other HG indices (e.g., HDI28 and HTI28) - is similar to the one measured during maximum cyanobacterial productivity in early to mid-September and suggests that HGs

Isolation and screening of heterocystous cyanobacterial strains for biodiesel production by evaluating the fuel properties from fatty acid methyl ester (FAME) profiles.

Science.gov (United States)

Anahas, Antonyraj Matharasi Perianaika; Muralitharan, Gangatharan

2015-05-01

This study reports on the biodiesel quality parameters of eleven heterocystous cyanobacterial strains based on fatty acid methyl esters (FAME) profiles. The biomass productivity of the tested cyanobacterial strains ranged from 9.33 to 20.67 mg L(-1) d(-1) while the lipid productivity varied between 0.65 and 2.358 mg L(-1) d(-1). The highest biomass and lipid productivity was observed for Calothrix sp. MBDU 013 but its lipid content is only 11.221 in terms of percent dry weight, next to the Anabaena sphaerica MBDU 105, whose lipid content is high. To identify the most competent isolate, a multi-criteria decision analyses (MCDA) was performed by including the key chemical and physical parameters of biodiesel calculated from FAME profiles. The isolate A.sphaerica MBDU 105 is the most promising biodiesel feed stock based on decision vector through Preference Ranking Organisation Method for Enrichment Evaluation (PROMETHEE) and Graphical Analysis for Interactive Assistance (GAIA) analysis. Copyright © 2014 Elsevier Ltd. All rights reserved.

Mutation of the murC and murB Genes Impairs Heterocyst Differentiation in Anabaena sp. Strain PCC 7120

OpenAIRE

Videau, Patrick; Rivers, Orion S.; Ushijima, Blake; Oshiro, Reid T.; Kim, Min Joo; Philmus, Benjamin; Cozy, Loralyn M.

2016-01-01

To stabilize cellular integrity in the face of environmental perturbations, most bacteria, including cyanobacteria, synthesize and maintain a strong, flexible, three-dimensional peptidoglycan lattice. Anabaena sp. strain PCC 7120 is a filamentous cyanobacterium capable of differentiating morphologically distinct nitrogen-fixing heterocyst cells in a periodic pattern. While heterocyst development has been shown to require proper peptidoglycan remodeling, the role of peptidoglycan synthesis has...

C5 glycolipids of heterocystous cyanobacteria track symbiont abundance in the diatom Hemiaulus hauckii across the tropical North Atlantic

Science.gov (United States)

Bale, Nicole J.; Villareal, Tracy A.; Hopmans, Ellen C.; Brussaard, Corina P. D.; Besseling, Marc; Dorhout, Denise; Sinninghe Damsté, Jaap S.; Schouten, Stefan

2018-03-01

Diatom-diazotroph associations (DDAs) include marine heterocystous cyanobacteria found as exosymbionts and endosymbionts in multiple diatom species. Heterocysts are the site of N2 fixation and have thickened cell walls containing unique heterocyst glycolipids which maintain a low oxygen environment within the heterocyst. The endosymbiotic cyanobacterium Richelia intracellularis found in species of the diatom genus Hemiaulus and Rhizosolenia makes heterocyst glycolipids (HGs) which are composed of C30 and C32 diols and triols with pentose (C5) moieties that are distinct from limnetic cyanobacterial HGs with predominantly hexose (C6) moieties. Here we applied a method for analysis of intact polar lipids to the study of HGs in suspended particulate matter (SPM) and surface sediment from across the tropical North Atlantic. The study focused on the Amazon plume region, where DDAs are documented to form extensive surface blooms, in order to examine the utility of C5 HGs as markers for DDAs as well as their transportation to underlying sediments. C30 and C32 triols with C5 pentose moieties were detected in both marine SPM and surface sediments. We found a significant correlation between the water column concentration of these long-chain C5 HGs and DDA symbiont counts. In particular, the concentrations of both the C5 HGs (1-(O-ribose)-3,27,29-triacontanetriol (C5 HG30 triol) and 1-(O-ribose)-3,29,31-dotriacontanetriol (C5 HG32 triol)) in SPM exhibited a significant correlation with the number of Hemiaulus hauckii symbionts. This result strengthens the idea that long-chain C5 HGs can be applied as biomarkers for marine endosymbiotic heterocystous cyanobacteria. The presence of the same C5 HGs in surface sediment provides evidence that they are effectively transported to the sediment and hence have potential as biomarkers for studies of the contribution of DDAs to the paleo-marine N cycle.

Analysis of the early heterocyst Cys-proteome in the multicellular cyanobacterium Nostoc punctiforme reveals novel insights into the division of labor within diazotrophic filaments.

Science.gov (United States)

Sandh, Gustaf; Ramström, Margareta; Stensjö, Karin

2014-12-04

In the filamentous cyanobacterium Nostoc punctiforme ATCC 29133, removal of combined nitrogen induces the differentiation of heterocysts, a cell-type specialized in N2 fixation. The differentiation involves genomic, structural and metabolic adaptations. In cyanobacteria, changes in the availability of carbon and nitrogen have also been linked to redox regulated posttranslational modifications of protein bound thiol groups. We have here employed a thiol targeting strategy to relatively quantify the putative redox proteome in heterocysts as compared to N2-fixing filaments, 24 hours after combined nitrogen depletion. The aim of the study was to expand the coverage of the cell-type specific proteome and metabolic landscape of heterocysts. Here we report the first cell-type specific proteome of newly formed heterocysts, compared to N2-fixing filaments, using the cysteine-specific selective ICAT methodology. The data set defined a good quantitative accuracy of the ICAT reagent in complex protein samples. The relative abundance levels of 511 proteins were determined and 74% showed a cell-type specific differential abundance. The majority of the identified proteins have not previously been quantified at the cell-type specific level. We have in addition analyzed the cell-type specific differential abundance of a large section of proteins quantified in both newly formed and steady-state diazotrophic cultures in N. punctiforme. The results describe a wide distribution of members of the putative redox regulated Cys-proteome in the central metabolism of both vegetative cells and heterocysts of N. punctiforme. The data set broadens our understanding of heterocysts and describes novel proteins involved in heterocyst physiology, including signaling and regulatory proteins as well as a large number of proteins with unknown function. Significant differences in cell-type specific abundance levels were present in the cell-type specific proteomes of newly formed diazotrophic filaments

The heterocyst differentiation transcriptional regulator HetR of the filamentous cyanobacterium Anabaena forms tetramers and can be regulated by phosphorylation.

Science.gov (United States)

Valladares, Ana; Flores, Enrique; Herrero, Antonia

2016-02-01

Many filamentous cyanobacteria respond to the external cue of nitrogen scarcity by the differentiation of heterocysts, cells specialized in the fixation of atmospheric nitrogen in oxic environments. Heterocysts follow a spatial pattern along the filament of two heterocysts separated by ca. 10-15 vegetative cells performing oxygenic photosynthesis. HetR is a transcriptional regulator that directs heterocyst differentiation. In the model strain Anabaena sp. PCC 7120, the HetR protein was observed in various oligomeric forms in vivo, including a tetramer that peaked with maximal hetR expression during differentiation. Tetramers were not detected in a hetR point mutant incapable of differentiation, but were conspicuous in an over-differentiating strain lacking the PatS inhibitor. In differentiated filaments the HetR tetramer was restricted to heterocysts, being undetectable in vegetative cells. HetR co-purified with RNA polymerase from Anabaena mainly as a tetramer. In vitro, purified recombinant HetR was distributed between monomers, dimers, trimers and tetramers, and it was phosphorylated when incubated with (γ-(32)P)ATP. Phosphorylation and PatS hampered the accumulation of HetR tetramers and impaired HetR binding to DNA. In summary, tetrameric HetR appears to represent a functionally relevant form of HetR, whose abundance in the Anabaena filament could be negatively regulated by phosphorylation and by PatS. © 2015 John Wiley & Sons Ltd.

Spatial separation of photosynthesis and ethanol production by cell type-specific metabolic engineering of filamentous cyanobacteria.

Science.gov (United States)

Ehira, Shigeki; Takeuchi, Takuto; Higo, Akiyoshi

2018-02-01

Cyanobacteria, which perform oxygenic photosynthesis, have drawn attention as hosts for the direct production of biofuels and commodity chemicals from CO 2 and H 2 O using light energy. Although cyanobacteria capable of producing diverse chemicals have been generated by metabolic engineering, anaerobic non-photosynthetic culture conditions are often necessary for their production. In this study, we conducted cell type-specific metabolic engineering of the filamentous cyanobacterium Anabaena sp. PCC 7120, which forms a terminally differentiated cell called a heterocyst with a semi-regular spacing of 10-15 cells. Because heterocysts are specialized cells for nitrogen fixation, the intracellular oxygen level of heterocysts is maintained very low even when adjacent cells perform oxygenic photosynthesis. Pyruvate decarboxylase of Zymomonas mobilis and alcohol dehydrogenase of Synechocystis sp. PCC 6803 were exclusively expressed in heterocysts. Ethanol production was concomitant with nitrogen fixation in genetically engineered Anabaena sp. PCC 7120. Engineering of carbon metabolism in heterocysts improved ethanol production, and strain ET14, with an extra copy of the invB gene expressed from a heterocyst-specific promoter, produced 130.9 mg L -1 of ethanol after 9 days. ET14 produced 1681.9 mg L -1 of ethanol by increasing the CO 2 supply. Ethanol production per heterocyst cell was approximately threefold higher than that per cell of unicellular cyanobacterium. This study demonstrates the potential of heterocysts for anaerobic production of biofuels and commodity chemicals under oxygenic photosynthetic conditions.

Distributions of geohopanoids in peat: Implications for the use of hopanoid-based proxies in natural archives

Science.gov (United States)

Inglis, Gordon N.; Naafs, B. David A.; Zheng, Yanhong; McClymont, Erin L.; Evershed, Richard P.; Pancost, Richard D.; T-GRES Peat Database Collaborators

2018-03-01

Hopanoids are pentacyclic triterpenoids produced by a wide range of bacteria. Within modern settings, hopanoids mostly occur in the biological 17β,21β(H) configuration. However, in some modern peatlands, the C31 hopane is present as the 'thermally-mature' 17α,21β(H) stereoisomer. This has traditionally been ascribed to isomerisation at the C-17 position catalysed by the acidic environment. However, recent work has argued that temperature and/or hydrology also exert a control upon hopane isomerisation. Such findings complicate the application of geohopanoids as palaeoenvironmental proxies. However, due to the small number of peats that have been studied, as well as the lack of peatland diversity sampled, the environmental controls regulating geohopanoid isomerisation remain poorly constrained. Here, we undertake a global approach to investigate the occurrence, distribution and diagenesis of geohopanoids within peat, combining previously published and newly generated data (n = 395) from peatlands with a wide temperature (-1 to 27 °C) and pH (3-8) range. Our results indicate that peats are characterised by a wide range of geohopanoids. However, the C31 hopane and C32 hopanoic acid (and occasionally the C32 hopanol) typically dominate. C32 hopanoic acids occur as αβ- and ββ-stereoisomers, with the ββ-isomer typically dominating. In contrast, C31 hopanes occur predominantly as the αβ-stereoisomer. These two observations collectively suggest that isomerisation is not inherited from an original biological precursor (i.e. biohopanoids). Using geohopanoid ββ/(αβ + ββ) indices, we demonstrate that the abundance of αβ-hopanoids is strongly influenced by the acidic environment, and we observe a significant positive correlation between C31 hopane isomerisation and pH (n = 94, r2 = 0.64, p indicates that this isomerisation is rapid. This shows that geohopanoid ββ/(αβ + ββ) indices can be used to reconstruct pH within modern and ancient peat

Cell wall amidase AmiC1 is required for cellular communication and heterocyst development in the cyanobacterium Anabaena PCC 7120 but not for filament integrity.

Science.gov (United States)

Berendt, Susanne; Lehner, Josef; Zhang, Yao Vincent; Rasse, Tobias M; Forchhammer, Karl; Maldener, Iris

2012-10-01

Filamentous cyanobacteria of the order Nostocales display typical properties of multicellular organisms. In response to nitrogen starvation, some vegetative cells differentiate into heterocysts, where fixation of N(2) takes place. Heterocysts provide a micro-oxic compartment to protect nitrogenase from the oxygen produced by the vegetative cells. Differentiation involves fundamental remodeling of the gram-negative cell wall by deposition of a thick envelope and by formation of a neck-like structure at the contact site to the vegetative cells. Cell wall-hydrolyzing enzymes, like cell wall amidases, are involved in peptidoglycan maturation and turnover in unicellular bacteria. Recently, we showed that mutation of the amidase homologue amiC2 gene in Nostoc punctiforme ATCC 29133 distorts filament morphology and function. Here, we present the functional characterization of two amiC paralogues from Anabaena sp. strain PCC 7120. The amiC1 (alr0092) mutant was not able to differentiate heterocysts or to grow diazotrophically, whereas the amiC2 (alr0093) mutant did not show an altered phenotype under standard growth conditions. In agreement, fluorescence recovery after photobleaching (FRAP) studies showed a lack of cell-cell communication only in the AmiC1 mutant. Green fluorescent protein (GFP)-tagged AmiC1 was able to complement the mutant phenotype to wild-type properties. The protein localized in the septal regions of newly dividing cells and at the neck region of differentiating heterocysts. Upon nitrogen step-down, no mature heterocysts were developed in spite of ongoing heterocyst-specific gene expression. These results show the dependence of heterocyst development on amidase function and highlight a pivotal but so far underestimated cellular process, the remodeling of peptidoglycan, for the biology of filamentous cyanobacteria.

Molecular phylogeny, population genetics, and evolution of heterocystous cyanobacteria using nifH gene sequences

Czech Academy of Sciences Publication Activity Database

Singh, P.; Singh, S. S.; Elster, Josef; Mishra, A. K.

2013-01-01

Roč. 250, č. 3 (2013), s. 751-764 ISSN 0033-183X Institutional support: RVO:67985939 Keywords : evolution * heterocystous cyanobacteria * nifH gene Subject RIV: EH - Ecology, Behaviour Impact factor: 3.171, year: 2013

Occurrence of an Unusual Hopanoid-containing Lipid A Among Lipopolysaccharides from Bradyrhizobium Species*

Science.gov (United States)

Komaniecka, Iwona; Choma, Adam; Mazur, Andrzej; Duda, Katarzyna A.; Lindner, Buko; Schwudke, Dominik; Holst, Otto

2014-01-01

The chemical structures of the unusual hopanoid-containing lipid A samples of the lipopolysaccharides (LPS) from three strains of Bradyrhizobium (slow-growing rhizobia) have been established. They differed considerably from other Gram-negative bacteria in regards to the backbone structure, the number of ester-linked long chain hydroxylated fatty acids, as well as the presence of a tertiary residue that consisted of at least one molecule of carboxyl-bacteriohopanediol or its 2-methyl derivative. The structural details of this type of lipid A were established using one- and two-dimensional NMR spectroscopy, chemical composition analyses, and mass spectrometry techniques (electrospray ionization Fourier-transform ion cyclotron resonance mass spectrometry and MALDI-TOF-MS). In these lipid A samples the glucosamine disaccharide characteristic for enterobacterial lipid A was replaced by a 2,3-diamino-2,3-dideoxy-d-glucopyranosyl-(GlcpN3N) disaccharide, deprived of phosphate residues, and substituted by an α-d-Manp-(1→6)-α-d-Manp disaccharide substituting C-4′ of the non-reducing (distal) GlcpN3N, and one residue of galacturonic acid (d-GalpA) α-(1→1)-linked to the reducing (proximal) amino sugar residue. Amide-linked 12:0(3-OH) and 14:0(3-OH) were identified. Some hydroxy groups of these fatty acids were further esterified by long (ω-1)-hydroxylated fatty acids comprising 26–34 carbon atoms. As confirmed by mass spectrometry techniques, these long chain fatty acids could form two or three acyloxyacyl residues. The triterpenoid derivatives were identified as 34-carboxyl-bacteriohopane-32,33-diol and 34-carboxyl-2β-methyl-bacteriohopane-32,33-diol and were covalently linked to the (ω-1)-hydroxy group of very long chain fatty acid in bradyrhizobial lipid A. Bradyrhizobium japonicum possessed lipid A species with two hopanoid residues. PMID:25371196

Mutation of the murC and murB Genes Impairs Heterocyst Differentiation in Anabaena sp. Strain PCC 7120.

Science.gov (United States)

Videau, Patrick; Rivers, Orion S; Ushijima, Blake; Oshiro, Reid T; Kim, Min Joo; Philmus, Benjamin; Cozy, Loralyn M

2016-04-01

To stabilize cellular integrity in the face of environmental perturbations, most bacteria, including cyanobacteria, synthesize and maintain a strong, flexible, three-dimensional peptidoglycan lattice. Anabaena sp. strain PCC 7120 is a filamentous cyanobacterium capable of differentiating morphologically distinct nitrogen-fixing heterocyst cells in a periodic pattern. While heterocyst development has been shown to require proper peptidoglycan remodeling, the role of peptidoglycan synthesis has remained unclear. Here we report the identification of two peptidoglycan synthesis genes, murC (alr5065) and murB (alr5066), as required for heterocyst development. The murC and murB genes are predicted to encode a UDP-N-acetylmuramate:L-alanine ligase and a UDP-N-acetylenolpyruvoylglucosamine reductase, respectively, and we confirm enzymatic function through complementation of Escherichia coli strains deficient for these enzymes. Cells depleted of either murC or murB expression failed to differentiate heterocysts under normally inducing conditions and displayed decreased filament integrity. To identify the stage(s) of development affected by murC or murB depletion, the spatial distribution of expression of the patterning marker gene, patS, was examined. Whereas murB depletion did not affect the pattern of patS expression, murC depletion led to aberrant expression of patS in all cells of the filament. Finally, expression of gfp controlled by the region of DNA immediately upstream of murC was enriched in differentiating cells and was repressed by the transcription factor NtcA. Collectively, the data in this work provide evidence for a direct link between peptidoglycan synthesis and the maintenance of a biological pattern in a multicellular organism. Multicellular organisms that differentiate specialized cells must regulate morphological changes such that both cellular integrity and the dissemination of developmental signals are preserved. Here we show that the multicellular

Comparison of plasmids from the cyanobacterium Nostoc PCC 7524 with two mutant strains unable to form heterocysts

NARCIS (Netherlands)

Reaston, J.; Hondel, C.A.M.J.J. van den; Ende, A. van der; Arkel, G.A. van; Stewart, W.D.P.; Herdman, M.

1980-01-01

Cyanobacteria (bluegreen bacteria) are O₂-evolving photosynthetic prokaryotes some species of which fix N₂ in air because the nitrogenase is protected from O₂ inactivation by being localized in differentiated cells called heterocysts. Recently much attention has been paid to the possible role

Heterologous expression of an algal hydrogenase in a heterocystous cyanobacterium

Energy Technology Data Exchange (ETDEWEB)

Thorsten Heidorn; Peter Lindblad [Dept. of Physiological Botany, Uppsala University, Villavogen 6, SE-752 36 Uppsala, (Sweden)

2006-07-01

For the expression of an active algal [FeFe] hydrogenase in the heterocystous cyanobacterium Nostoc punctiforme A TCC 29133 the Chlamydomonas reinhardtii hydrogenase gene hydA1 and the accessory genes hydEF and hydG are to be introduced into the cyanobacteria cells. The genes were amplified by PCR from EST clones, cloned into the cloning vector pBluescript SK+ and sequenced. An expression vector for multi-cistronic cloning, based on pSCR202, was constructed and for a functional test GFP was inserted as a reporter gene. The GFP construct was transformed into Nostoc punctiforme A TCC 29133 by electroporation and expression of GFP was visualized by fluorescence microscopy. (authors)

Heterologous expression of an algal hydrogenase in a heterocystous cyanobacterium

International Nuclear Information System (INIS)

Thorsten Heidorn; Peter Lindblad

2006-01-01

For the expression of an active algal [FeFe] hydrogenase in the heterocystous cyanobacterium Nostoc punctiforme A TCC 29133 the Chlamydomonas reinhardtii hydrogenase gene hydA1 and the accessory genes hydEF and hydG are to be introduced into the cyanobacteria cells. The genes were amplified by PCR from EST clones, cloned into the cloning vector pBluescript SK+ and sequenced. An expression vector for multi-cistronic cloning, based on pSCR202, was constructed and for a functional test GFP was inserted as a reporter gene. The GFP construct was transformed into Nostoc punctiforme A TCC 29133 by electroporation and expression of GFP was visualized by fluorescence microscopy. (authors)

Lack of Methylated Hopanoids Renders the Cyanobacterium Nostoc punctiforme Sensitive to Osmotic and pH Stress.

Science.gov (United States)

Garby, Tamsyn J; Matys, Emily D; Ongley, Sarah E; Salih, Anya; Larkum, Anthony W D; Walter, Malcolm R; Summons, Roger E; Neilan, Brett A

2017-07-01

To investigate the function of 2-methylhopanoids in modern cyanobacteria, the hpnP gene coding for the radical S -adenosyl methionine (SAM) methylase protein that acts on the C-2 position of hopanoids was deleted from the filamentous cyanobacterium Nostoc punctiforme ATCC 29133S. The resulting Δ hpnP mutant lacked all 2-methylhopanoids but was found to produce much higher levels of two bacteriohopanepentol isomers than the wild type. Growth rates of the Δ hpnP mutant cultures were not significantly different from those of the wild type under standard growth conditions. Akinete formation was also not impeded by the absence of 2-methylhopanoids. The relative abundances of the different hopanoid structures in akinete-dominated cultures of the wild-type and Δ hpnP mutant strains were similar to those of vegetative cell-dominated cultures. However, the Δ hpnP mutant was found to have decreased growth rates under both pH and osmotic stress, confirming a role for 2-methylhopanoids in stress tolerance. Evidence of elevated photosystem II yield and NAD(P)H-dependent oxidoreductase activity in the Δ hpnP mutant under stress conditions, compared to the wild type, suggested that the absence of 2-methylhopanoids increases cellular metabolic rates under stress conditions. IMPORTANCE As the first group of organisms to develop oxygenic photosynthesis, Cyanobacteria are central to the evolutionary history of life on Earth and the subsequent oxygenation of the atmosphere. To investigate the origin of cyanobacteria and the emergence of oxygenic photosynthesis, geobiologists use biomarkers, the remnants of lipids produced by different organisms that are found in geologic sediments. 2-Methylhopanes have been considered indicative of cyanobacteria in some environmental settings, with the parent lipids 2-methylhopanoids being present in many contemporary cyanobacteria. We have created a Nostoc punctiforme Δ hpnP mutant strain that does not produce 2-methylhopanoids to assess the

Heterologous expression of an algal hydrogenase in a hetero-cystous cyanobacterium

Energy Technology Data Exchange (ETDEWEB)

Thorsten Heidorn; Peter Lindblad [Dept. of Physiological Botany, Uppsala University, V illavagen 6, SE-752 36 Uppsala, (Sweden)

2006-07-01

For the expression of an active algal [FeFe] hydrogenase in the hetero-cystous cyanobacterium Nostoc punctiforme A TCC 29133 the Chlamydomonas reinhardtii hydrogenase gene hydA1 and the accessory genes hydEF and hydG are to be introduced into the cyano-bacterial cells. The genes were amplified by PCR from EST clones, cloned into the cloning vector pBluescript SK+ and sequenced. An expression vector for multi-cistronic cloning, based on pSCR202, was constructed and for a functional test GFP was inserted as a reporter gene. The GFP construct was transformed into Nostoc punctiforme A TCC 29133 by electroporation and expression of GFP was visualized by fluorescence microscopy. (authors)

Heterologous expression of an algal hydrogenase in a hetero-cystous cyanobacterium

International Nuclear Information System (INIS)

Thorsten Heidorn; Peter Lindblad

2006-01-01

For the expression of an active algal [FeFe] hydrogenase in the hetero-cystous cyanobacterium Nostoc punctiforme A TCC 29133 the Chlamydomonas reinhardtii hydrogenase gene hydA1 and the accessory genes hydEF and hydG are to be introduced into the cyano-bacterial cells. The genes were amplified by PCR from EST clones, cloned into the cloning vector pBluescript SK+ and sequenced. An expression vector for multi-cistronic cloning, based on pSCR202, was constructed and for a functional test GFP was inserted as a reporter gene. The GFP construct was transformed into Nostoc punctiforme A TCC 29133 by electroporation and expression of GFP was visualized by fluorescence microscopy. (authors)

H{sub 2} - photoproduction by a non-heterocystous cyanobacterium Plectonema boryanum : a model tool for biotechnological exploitation

Energy Technology Data Exchange (ETDEWEB)

Chaturvedi, S.; Sarkar, S.; Kashyap, A.K.; Pandey, K.D. [Banaras Hindu Univ., Varanasi (India). Dept. of Botany

2001-07-01

A parallel increase in nitrogenase activity and H{sub 2} evolution in Plectonema boryanum under microaerobic (Ar/N{sub 2}/CO{sub 2}: 72/24/4; v/v) phototrophic condition indicated that later process was nitrogenase mediated. Enhanced H{sub 2} photoproduction was observed in presence of reducing substances and metabolic inhibitors (DCMU and MSX). N{sub 2}-fixed during the process was simultaneously released in the medium as NH{sub 4}{sup +}. Further enhancement and sustainability in both the processes was achieved by immobilization in alginate or sponge. A comparison with heterocystous cyanobacteria suggested that Plectonema was efficient H{sub 2} producing organism. (orig.)

Chemotaxonomy of heterocystous cyanobacteria using FAME profiling as species markers.

Science.gov (United States)

Shukla, Ekta; Singh, Satya Shila; Singh, Prashant; Mishra, Arun Kumar

2012-07-01

The fatty acid methyl ester (FAME) analysis of the 12 heterocystous cyanobacterial strains showed different fatty acid profiling based on the presence/absence and the percentage of 13 different types of fatty acids. The major fatty acids viz. palmitic acid (16:0), hexadecadienoic acid (16:2), stearic acid (18:0), oleic acid (18:1), linoleic (18:2), and linolenic acid (18:3) were present among all the strains except Cylindrospermum musicola where oleic acid (18:1) was absent. All the strains showed high levels of polyunsaturated fatty acid (PUFAs; 41-68.35%) followed by saturated fatty acid (SAFAs; 1.82-40.66%) and monounsaturated fatty acid (0.85-24.98%). Highest percentage of PUFAs and essential fatty acid (linolenic acid; 18:3) was reported in Scytonema bohnerii which can be used as fatty acid supplement in medical and biotechnological purpose. The cluster analysis based on FAME profiling suggests the presence of two distinct clusters with Euclidean distance ranging from 0 to 25. S. bohnerii of cluster I was distantly related to the other strains of cluster II. The genotypes of cluster II were further divided into two subclusters, i.e., IIa with C. musicola showing great divergence with the other genotypes of IIb which was further subdivided into two groups. Subsubcluster IIb(1) was represented by a genotype, Anabaena sp. whereas subsubcluster IIb(2) was distinguished by two groups, i.e., one group having significant similarity among their three genotypes showed distant relation with the other group having closely related six genotypes. To test the validity of the fatty acid profiles as a marker, cluster analysis has also been generated on the basis of morphological attributes. Our results suggest that FAME profiling might be used as species markers in the study of polyphasic approach based taxonomy and phylogenetic relationship.

Use of 13N in studies of fixation of dinitrogen and assimilation of ammonium by cyanobacteria

International Nuclear Information System (INIS)

Meeks, J.C.; Wolk, C.P.; Thomas, J.; Austin, S.M.; Galonsky, A.; Michigan State Univ., East Lansing

1978-01-01

13 N (tsub(1/2)=10min) has been used to identify the initial products of assimilation of N 2 and NH 4 + by intact filaments of a number of cyanobacteria and by heterocysts isolated from Anabaena cylindrica. Ammonium, the amide nitrogen of glutamine, and the α-amino nitrogen of glutamate, in that order, were the first observed products of fixation of [ 13 N]N 2 . Amide-labelled glutamine was the initial product of metabolism of 13 NH 4 + by A. cylindrica grown with either NH 4 + or N 2 as the nitrogen source. Glutamate was the second major product of 13 NH 4 + assimilation. Isolated heterocysts form [ 13 N]glutamine but not [ 13 N]glutamate from [ 13 N]N 2 or 13 NH 4 + . Formation of [ 13 N]glutamine from [ 13 N]N 2 was inhibited by acetylene, indicating metabolic coupling of the activity of glutamine synthetase to that of nitrogenase in these cells. A diffusible substance produced by heterocysts inhibits nearby cells of the same filament from differentiating into heterocysts. Glutamine (or a derivative of glutamine) may be involved in inhibiting differentiation of vegetative cells. (author)

Microbial communities and organic biomarkers in a Proterozoic-analog sinkhole.

Science.gov (United States)

Hamilton, T L; Welander, P V; Albrecht, H L; Fulton, J M; Schaperdoth, I; Bird, L R; Summons, R E; Freeman, K H; Macalady, J L

2017-11-01

Little Salt Spring (Sarasota County, FL, USA) is a sinkhole with groundwater vents at ~77 m depth. The entire water column experiences sulfidic (~50 μM) conditions seasonally, resulting in a system poised between oxic and sulfidic conditions. Red pinnacle mats occupy the sediment-water interface in the sunlit upper basin of the sinkhole, and yielded 16S rRNA gene clones affiliated with Cyanobacteria, Chlorobi, and sulfate-reducing clades of Deltaproteobacteria. Nine bacteriochlorophyll e homologues and isorenieratene indicate contributions from Chlorobi, and abundant chlorophyll a and pheophytin a are consistent with the presence of Cyanobacteria. The red pinnacle mat contains hopanoids, including 2-methyl structures that have been interpreted as biomarkers for Cyanobacteria. A single sequence of hpnP, the gene required for methylation of hopanoids at the C-2 position, was recovered in both DNA and cDNA libraries from the red pinnacle mat. The hpnP sequence was most closely related to cyanobacterial hpnP sequences, implying that Cyanobacteria are a source of 2-methyl hopanoids present in the mat. The mats are capable of light-dependent primary productivity as evidenced by 13 C-bicarbonate photoassimilation. We also observed 13 C-bicarbonate photoassimilation in the presence of DCMU, an inhibitor of electron transfer to Photosystem II. Our results indicate that the mats carry out light-driven primary production in the absence of oxygen production-a mechanism that may have delayed the oxygenation of the Earth's oceans and atmosphere during the Proterozoic Eon. Furthermore, our observations of the production of 2-methyl hopanoids by Cyanobacteria under conditions of low oxygen and low light are consistent with the recovery of these structures from ancient black shales as well as their paucity in modern marine environments. © 2017 The Authors. Geobiology Published by John Wiley & Sons Ltd.

Response of Nodularia spumigena to pCO2 – Part 1: Growth, production and nitrogen cycling

Directory of Open Access Journals (Sweden)

M. Nausch

2012-08-01

Full Text Available Heterocystous cyanobacteria of the genus Nodularia form extensive blooms in the Baltic Sea and contribute substantially to the total annual primary production. Moreover, they dispense a large fraction of new nitrogen to the ecosystem when inorganic nitrogen concentration in summer is low. Thus, it is of ecological importance to know how Nodularia will react to future environmental changes, in particular to increasing carbon dioxide (CO2 concentrations and what consequences there might arise for cycling of organic matter in the Baltic Sea. Here, we determined carbon (C and dinitrogen (N2 fixation rates, growth, elemental stoichiometry of particulate organic matter and nitrogen turnover in batch cultures of the heterocystous cyanobacterium Nodularia spumigena under low (median 315 μatm, mid (median 353 μatm, and high (median 548 μatm CO2 concentrations. Our results demonstrate an overall stimulating effect of rising pCO2 on C and N2 fixation, as well as on cell growth. An increase in pCO2 during incubation days 0 to 9 resulted in an elevation in growth rate by 84 ± 38% (low vs. high pCO2 and 40 ± 25% (mid vs. high pCO2, as well as in N2 fixation by 93 ± 35% and 38 ± 1%, respectively. C uptake rates showed high standard deviations within treatments and in between sampling days. Nevertheless, C fixation in the high pCO2 treatment was elevated compared to the other two treatments by 97% (high vs. low and 44% (high vs. mid at day 0 and day 3, but this effect diminished afterwards. Additionally, elevation in carbon to nitrogen and nitrogen to phosphorus ratios of the particulate biomass formed (POC : POP and PON : POP was observed at high pCO2. Our findings suggest that rising pCO2 stimulates the growth of heterocystous diazotrophic cyanobacteria, in a similar way as reported for the non-heterocystous diazotroph Trichodesmium. Implications for biogeochemical cycling and food web dynamics, as well as ecological and socio-economical aspects in the

Is the distribution of nitrogen-fixing cyanobacteria in the oceans related to temperature?

Science.gov (United States)

Stal, Lucas J

2009-07-01

Approximately 50% of the global natural fixation of nitrogen occurs in the oceans supporting a considerable part of the new primary production. Virtually all nitrogen fixation in the ocean occurs in the tropics and subtropics where the surface water temperature is 25°C or higher. It is attributed almost exclusively to cyanobacteria. This is remarkable firstly because diazotrophic cyanobacteria are found in other environments irrespective of temperature and secondly because primary production in temperate and cold oceans is generally limited by nitrogen. Cyanobacteria are oxygenic phototrophic organisms that evolved a variety of strategies protecting nitrogenase from oxygen inactivation. Free-living diazotrophic cyanobacteria in the ocean are of the non-heterocystous type, namely the filamentous Trichodesmium and the unicellular groups A-C. I will argue that warm water is a prerequisite for these diazotrophic organisms because of the low-oxygen solubility and high rates of respiration allowing the organism to maintain anoxic conditions in the nitrogen-fixing cell. Heterocystous cyanobacteria are abundant in freshwater and brackish environments in all climatic zones. The heterocyst cell envelope is a tuneable gas diffusion barrier that optimizes the influx of both oxygen and nitrogen, while maintaining anoxic conditions inside the cell. It is not known why heterocystous cyanobacteria are absent from the temperate and cold oceans and seas.

Amino Acid Transporters and Release of Hydrophobic Amino Acids in the Heterocyst-Forming Cyanobacterium Anabaena sp. Strain PCC 7120

Directory of Open Access Journals (Sweden)

Rafael Pernil

2015-04-01

Full Text Available Anabaena sp. strain PCC 7120 is a filamentous cyanobacterium that can use inorganic compounds such as nitrate or ammonium as nitrogen sources. In the absence of combined nitrogen, it can fix N2 in differentiated cells called heterocysts. Anabaena also shows substantial activities of amino acid uptake, and three ABC-type transporters for amino acids have been previously characterized. Seven new loci encoding predicted amino acid transporters were identified in the Anabaena genomic sequence and inactivated. Two of them were involved in amino acid uptake. Locus alr2535-alr2541 encodes the elements of a hydrophobic amino acid ABC-type transporter that is mainly involved in the uptake of glycine. ORF all0342 encodes a putative transporter from the dicarboxylate/amino acid:cation symporter (DAACS family whose inactivation resulted in an increased uptake of a broad range of amino acids. An assay to study amino acid release from Anabaena filaments to the external medium was set up. Net release of the alanine analogue α-aminoisobutyric acid (AIB was observed when transport system N-I (a hydrophobic amino acid ABC-type transporter was engaged in the uptake of a specific substrate. The rate of AIB release was directly proportional to the intracellular AIB concentration, suggesting leakage from the cells by diffusion.

Rare bacteriohopanepolyols as markers for an autotrophic, intra-aerobic methanotroph

NARCIS (Netherlands)

Kool, D.M.; Talbot, H.M.; Rush, D.; Ettwig, K.; Sinninghe Damsté, J.S.

2014-01-01

Bacteriohopanepolyols (BHPs) and their diagenetic products, hopanoids, are of great interest for their potential as bio-marker lipids in both present day environments as well as in the geological record. Specific structural features such as methylation of the A-ring, and number and type of

Evaluation of toxicological impact of cartap hydrochloride on some physiological activities of a non-heterocystous cyanobacterium Leptolyngbya foveolarum.

Science.gov (United States)

Singh, D P; Khattar, J I S; Gupta, Meenu; Kaur, Gurdeep

2014-03-01

The present study was aimed to the evaluation of toxicological impact of insecticide cartap hydrochloride on photosynthesis and nitrogen assimilation of a non-heterocystous cyanoprokaryote Leptolyngbya foveolarum isolated from paddy fields of Punjab, India. The microorganism tolerated commercial grade insecticide up to 80 ppm. Lower concentration (20 ppm) of cartap supported good growth with high dry weight of biomass, total protein content, photosynthetic pigments, photosynthesis and respiration compared to untreated control cultures while higher concentrations (40 and 60 ppm) inhibited these parameters in a dose dependent manner. Treatment of the microorganism with 60 ppm cartap lowered the content of photosynthetic pigments with maximum inhibitory effect on phycoerythrin (70% decrease) followed by allophycocyanin (66% decrease). Rates of photosynthesis and respiration were inhibited by 63% and 45%, respectively, while PS-I, II and whole chain activity were decreased by 45%, 67% and 40% respectively, compared to untreated control cultures. Cartap at 60 ppm decreased nitrate and nitrite uptake by 31% and 61%, respectively, whereas uptake of ammonium was slightly increased (18%) in cartap (60 ppm) treated cells. Nitrate and nitrite reductase, and glutamine synthetase activities of the microorganism decreased by 36-50% in 60 ppm cartap. The low levels of growth, photosynthetic pigments and activities of nitrogen assimilating enzymes in cells grown in nitrogen depleted medium supplement with insecticide indicated that insecticide may be used by the organism as a nitrogen source. Copyright © 2014 Elsevier Inc. All rights reserved.

The interplay between siderophore secretion and coupled iron and copper transport in the heterocyst-forming cyanobacterium Anabaena sp. PCC 7120.

Science.gov (United States)

Nicolaisen, Kerstin; Hahn, Alexander; Valdebenito, Marianne; Moslavac, Suncana; Samborski, Anastazia; Maldener, Iris; Wilken, Corinna; Valladares, Ana; Flores, Enrique; Hantke, Klaus; Schleiff, Enrico

2010-11-01

Iron uptake is essential for Gram-negative bacteria including cyanobacteria. In cyanobacteria, however, the iron demand is higher than in proteobacteria due to the function of iron as a cofactor in photosynthesis and nitrogen fixation, but our understanding of iron uptake by cyanobacteria stands behind the knowledge in proteobacteria. Here, two genes involved in this process in the heterocyst-forming cyanobacterium Anabaena sp. PCC 7120 were identified. ORF all4025 encodes SchE, a putative cytoplasmic membrane-localized transporter involved in TolC-dependent siderophore secretion. Inactivation of schE resulted in an enhanced sensitivity to high metal concentrations and decreased secretion of hydroxamate-type siderophores. ORF all4026 encodes a predicted outer membrane-localized TonB-dependent iron transporter, IacT. Inactivation of iacT resulted in decreased sensitivity to elevated iron and copper levels. Expression of iacT from the artificial trc promoter (P(trc)) resulted in sensitization against tested metals. Further analysis showed that iron and copper effects are synergistic because a decreased supply of iron induced a significant decrease of copper levels in the iacT insertion mutant but an increase of those levels in the strain carrying P(trc)-iacT. Our results unravel a link between iron and copper homeostasis in Anabaena sp. PCC 7120. Copyright © 2010 Elsevier B.V. All rights reserved.

Effects of lead accumulation on the Azolla caroliniana-Anabaena association.

Science.gov (United States)

Roberts, Anne E; Boylen, Charles W; Nierzwicki-Bauer, Sandra A

2014-04-01

The effect of lead accumulation on photopigment production, mineral nutrition, and Anabaena vegetative cell size and heterocyst formation in Azolla caroliniana was investigated. Plants were exposed to 0, 1, 5, 10, and 20 mg L(-1) lead acetate for ten days. Lead accumulation increased when plants were treated with higher lead concentrations. Results revealed a statistically significant decline in total chlorophyll, chlorophyll a, chlorophyll b, and carotenoids in 5, 10, and 20 mg Pb L(-1) treatment groups as compared to plants with 0 or 1 mg Pb L(-1) treatments. No statistically significant change in anthocyanin production was observed. Calcium, magnesium, and zinc concentrations in plants decreased in increasing treatment groups, whereas sodium and potassium concentrations increased. Nitrogen and carbon were also found to decrease in plant tissue. Anabaena vegetative cells decreased in size and heterocyst frequency declined rapidly in a Pb dose-dependent manner. These results indicate that, while A. caroliniana removes lead from aqueous solution, the heavy metal causes physiological and biochemical changes by impairing photosynthesis, changing mineral nutrition, and impeding the growth and formation of heterocysts of the symbiotic cyanobacteria that live within leaf cavities of the fronds. Copyright © 2014. Published by Elsevier Inc.

Specific acyclic isoprenoids as biological markers of methanogenic bacteria in marine sediments.

Science.gov (United States)

Brassell, S C; Wardroper, A M; Thomson, I D; Maxwell, J R; Eglinton, G

1981-04-23

The widespread occurrence of extended hopanoids in sediments and petroleums illustrates the importance of bacterial lipid contributions to geological materials. In archaebacteria, however, hopanoids are absent; their role as structural components of biomembranes is fulfilled by acyclic isoprenoids. Recent studies of the lipid constituents of archaebacteria have greatly extended the range of acyclic isoprenoid skeletons known in organisms (Fig. 1). In particularly, isoprenoids with head-to-head linkages have been identified, and such compounds (for example, 3,7,11,15,18,22,26,30-octamethyldotriacontane, I) have been recognized in petroleum and as degradation products of Messel shale kerogen. Here we report the first recognition of 2,6,10,15,19-pentamethyleicosane (II), a known component of methanogens, in marine sediments of Recent to Cretaceous age (Table 1) and suggest that it and certain other acyclic isoprenoids may be used as biological markers for methanogens.

Novel Lipid Biomarkers for Past Oceanic N2 Fixation

Science.gov (United States)

Bale, N. J.; Hopmans, E. C.; Villareal, T. A.; Zell, C. I.; Sinninghe Damsté, , J.; Schouten, S.

2014-12-01

Nitrogen-fixing cyanobacteria play important roles in the biogeochemical cycles of aquatic systems. Both heterocystous and non-heterocystous N2-fixing cyanobacteria are symbiotic with marine diatoms and thrive in low nutrient environments. These associations are significant exporters of carbon to the deep-sea, but suitable tracers for reconstructing their importance in past environments are lacking. We recently analyzed the heterocyst glycolipids (HGs) of the heterocystous Richelia intracellularis symbiont of the marine diatoms Hemiaulus hauckii and H. membranaceus and found unique C5 glycolipids with C30-32 carbon chains, a structure different from the C6 glycolipids detected in freshwater heterocystous cyanobacteria. We developed a high performance liquid chromatography/ multiple reaction monitoring mass spectrometry (HPLC/MS) method specific for trace analysis of long chain C5 HGs and applied it to suspended particulate matter (SPM) and surface sediment from the Amazon plume, a region known to harbor marine diatoms carrying heterocystous cyanobacteria as endosymbionts. C5 HGs were detected in both SPM and sediments demonstrating their biomarker potential. They were not detected in SPM or sediment from freshwater settings in the region. Rather, limnetic SPM and sediments contained C6 HGs which are established biomarkers for free-living heterocystous cyanobacteria. Glycolipids have been found preserved in sediments of up to 49 Ma old. Our development of the C5 biomarkers has the potential to improve our knowledge of the contribution of symbiotic cyanobacteria to the paleo-N-cycle.

Sulfurisation of lipids in a marine-influenced lignite

Energy Technology Data Exchange (ETDEWEB)

Sandison, C.M.; Alexander, R.; Kagi, R.I.; Boreham, C.J. [Curtin University of Technology, Perth, WA (Australia)

2002-07-01

Compelling evidence is presented for the process of lipid sulfurisation in humic coal-forming environments. The production of reduced inorganic sulfides by sulfate-reducing bacteria during a marine transgression, which occurred during early diagenesis, enabled the selective sequestration of functionalised lipids in the polar and asphaltene fractions from the Eocene, marine-influenced Heartbreak Ridge lignite deposit in southeast Western Australia. Nickel boride desulfurisation experiments conducted on these fractions released small but significant quantities of sulfur-bound hydrocarbons. These comprised mostly higher plant triterpanes, C-29 steranes and extended 17beta(H),21beta(H)-hopanes, linked by one sulfur atom at, or close to, functionalised sites in the original natural product precursors. These sulfurised lipids come from the same carbon sources as the free hydrocarbon lipids, except for the sulfurised extended hopanoids, which may be partially derived from a different bacterial source. These results indicate that the selectivity and nature of steroid and hopanoid vulcanisation in coal-forming mires is similar to that observed in other sedimentary environments. However, the diversity of higher plant triterpanes that can be sulfurised in marine transgressed coals is greater than that reported in immature terrestrial coals. This preservation mechanism explains the formation of the structurally related biomarkers in more mature sulfur-rich humic coals.

Regulation of Development and Nitrogen Fixation in Anabaena

Energy Technology Data Exchange (ETDEWEB)

James W. Golden

2008-10-17

The regulation of development and cellular differentiation is important for all multicellular organisms. The nitrogen-fixing filamentous cyanobacterium Anabaena (also Nostoc) sp. PCC 7120 (hereafter Anabaena) provides a model of multicellular microbial development and pattern formation. Anabaena reduces N2 to ammonia in specialized terminally differentiated cells called heterocysts. A one-dimensional developmental pattern of single heterocysts regularly spaced along filaments of photosynthetic vegetative cells is established to form a multicellular organism composed of these two interdependent cell types. This multicellular growth pattern, the distinct phylogeny of cyanobacteria, and the suspected antiquity of heterocyst development make this an important model system. Our long-term goal is to understand the regulatory network required for heterocyst development and nitrogen fixation. This project is focused on two key aspects of heterocyst regulation: one, the mechanism by which HetR controls the initiation of differentiation, and two, the cis and trans acting factors required for expression of the nitrogen-fixation (nif) genes. HetR is thought to be a central regulator of heterocyst development but the partners and mechanisms involved in this regulation are unknown. Our recent results indicate that PatS and other signals that regulate heterocyst pattern cannot interact, directly or indirectly, with a R223W mutant of HetR. We plan to use biochemical and genetic approaches to identify proteins that interact with the HetR protein, which will help reveal the mechanisms underlying its regulation of development. Our second goal is to determine how the nif genes are expressed. It is important to understand the mechanisms controlling nif genes since they represent the culmination of the differentiation process and the essence of heterocyst function. The Anabaena genome lacks the genes required for expression of nif genes present in other organisms such as rpoN (sigma 54

Molecular Diffusion through Cyanobacterial Septal Junctions

Directory of Open Access Journals (Sweden)

Mercedes Nieves-Morión

2017-01-01

Full Text Available Heterocyst-forming cyanobacteria grow as filaments in which intercellular molecular exchange takes place. During the differentiation of N2-fixing heterocysts, regulators are transferred between cells. In the diazotrophic filament, vegetative cells that fix CO2 through oxygenic photosynthesis provide the heterocysts with reduced carbon and heterocysts provide the vegetative cells with fixed nitrogen. Intercellular molecular transfer has been traced with fluorescent markers, including calcein, 5-carboxyfluorescein, and the sucrose analogue esculin, which are observed to move down their concentration gradient. In this work, we used fluorescence recovery after photobleaching (FRAP assays in the model heterocyst-forming cyanobacterium Anabaena sp. strain PCC 7120 to measure the temperature dependence of intercellular transfer of fluorescent markers. We find that the transfer rate constants are directly proportional to the absolute temperature. This indicates that the “septal junctions” (formerly known as “microplasmodesmata” linking the cells in the filament allow molecular exchange by simple diffusion, without any activated intermediate state. This constitutes a novel mechanism for molecular transfer across the bacterial cytoplasmic membrane, in addition to previously characterized mechanisms for active transport and facilitated diffusion. Cyanobacterial septal junctions are functionally analogous to the gap junctions of metazoans.

Pulque production from fermented agave sap as a dietary supplement in Prehispanic Mesoamerica.

Science.gov (United States)

Correa-Ascencio, Marisol; Robertson, Ian G; Cabrera-Cortés, Oralia; Cabrera-Castro, Rubén; Evershed, Richard P

2014-09-30

Although in modern societies fermented beverages are associated with socializing, celebration, and ritual, in ancient times they were also importa`nt sources of essential nutrients and potable water. In Mesoamerica, pulque, an alcoholic beverage produced from the fermented sap of several species of maguey plants (Agavaceae; Fig. 1) is hypothesized to have been used as a dietary supplement and risk-buffering food in ancient Teotihuacan (150 B.C. to A.D. 650). Although direct archaeological evidence of pulque production is lacking, organic residue analysis of pottery vessels offers a new avenue of investigation. However, the chemical components of alcoholic beverages are water-soluble, greatly limiting their survival over archaeological timescales compared with hydrophobic lipids widely preserved in food residues. Hence, we apply a novel lipid biomarker approach that considers detection of bacteriohopanoids derived from the ethanol-producing bacterium Zymomonas mobilis for identifying pulque production/consumption in pottery vessels. Gas chromatography-mass spectrometry selected ion monitoring (m/z 191) of lipid extracts of >300 potsherds revealed characteristic bacteriohopanoid distributions in a subset of 14 potsherds. This hopanoid biomarker approach offers a new means of identifying commonly occurring bacterially fermented alcoholic beverages worldwide, including palm wine, beer, cider, perry, and other plant sap- or fruit-derived beverages [Swings J, De Ley J (1977) Bacteriol Rev 41(1):1-46].

Estimation for origin of coals on biomaker analysis; Jinko sekitan oyobi tennen sekitan no biomaker bunseki ni yoru sekitan kigen busshitsu no suitei

Energy Technology Data Exchange (ETDEWEB)

Suzuki, Y. [Geological Survey of Japan, Tsukuba (Japan); Sugimoto, Y. [National Institute of Materials and Chemical Research, Tsukuba (Japan); Okada, K. [Coal Mining Research Center, Tokyo (Japan)

1996-10-28

In order to study coal production processes, an estimation study was carried out on coal originating materials by using biomaker analysis. Test samples are original coals collected directly from a mine in Hokkaido (not having been subjected cleaning). Mixing and solvent extraction were performed after pulverization, and then tests were given on saturated hydrocarbon components divided by using a silicagel column chromatograph for the present study. It can be known from n-alkane distribution in the coal that low molecular alkane increases with increasing degree of coalification. Artificial coal made by wet-heating Metasequoia leaves contains only little n-alkane. Diterpenoid compound exists in the Taiheiyo and Akabira coals. Tetra-cyclic diterpernoid is contained abundantly in subtropical coniferous trees, serving as a parameter for warm environment. The compound is contained also in the Fushun coal, but not in Indonesian coals. Hopanoid constitution shows very high similarity, but H/C atomic ratio may vary largely even if the coalification is at the same degree. This is likely to be caused from difference in originating materials. Hopanoids are bacteria attributed substances, whose activities are not affected by the originating materials. 2 figs., 1 tab.

Directional RNA deep sequencing sheds new light on the transcriptional response of Anabaena sp. strain PCC 7120 to combined-nitrogen deprivation

Directory of Open Access Journals (Sweden)

Head Steven R

2011-06-01

Full Text Available Abstract Background Cyanobacteria are potential sources of renewable chemicals and biofuels and serve as model organisms for bacterial photosynthesis, nitrogen fixation, and responses to environmental changes. Anabaena (Nostoc sp. strain PCC 7120 (hereafter Anabaena is a multicellular filamentous cyanobacterium that can "fix" atmospheric nitrogen into ammonia when grown in the absence of a source of combined nitrogen. Because the nitrogenase enzyme is oxygen sensitive, Anabaena forms specialized cells called heterocysts that create a microoxic environment for nitrogen fixation. We have employed directional RNA-seq to map the Anabaena transcriptome during vegetative cell growth and in response to combined-nitrogen deprivation, which induces filaments to undergo heterocyst development. Our data provide an unprecedented view of transcriptional changes in Anabaena filaments during the induction of heterocyst development and transition to diazotrophic growth. Results Using the Illumina short read platform and a directional RNA-seq protocol, we obtained deep sequencing data for RNA extracted from filaments at 0, 6, 12, and 21 hours after the removal of combined nitrogen. The RNA-seq data provided information on transcript abundance and boundaries for the entire transcriptome. From these data, we detected novel antisense transcripts within the UTRs (untranslated regions and coding regions of key genes involved in heterocyst development, suggesting that antisense RNAs may be important regulators of the nitrogen response. In addition, many 5' UTRs were longer than anticipated, sometimes extending into upstream open reading frames (ORFs, and operons often showed complex structure and regulation. Finally, many genes that had not been previously identified as being involved in heterocyst development showed regulation, providing new candidates for future studies in this model organism. Conclusions Directional RNA-seq data were obtained that provide

Characterization of the hupSL promoter activity in Nostoc punctiforme ATCC 29133

Science.gov (United States)

2009-01-01

Background In cyanobacteria three enzymes are directly involved in the hydrogen metabolism; a nitrogenase that produces molecular hydrogen, H2, as a by-product of nitrogen fixation, an uptake hydrogenase that recaptures H2 and oxidize it, and a bidirectional hydrogenase that can both oxidize and produce H2.Nostoc punctiforme ATCC 29133 is a filamentous dinitrogen fixing cyanobacterium containing a nitrogenase and an uptake hydrogenase but no bidirectional hydrogenase. Generally, little is known about the transcriptional regulation of the cyanobacterial uptake hydrogenases. In this study gel shift assays showed that NtcA has a specific affinity to a region of the hupSL promoter containing a predicted NtcA binding site. The predicted NtcA binding site is centred at 258.5 bp upstream the transcription start point (tsp). To further investigate the hupSL promoter, truncated versions of the hupSL promoter were fused to either gfp or luxAB, encoding the reporter proteins Green Fluorescent Protein and Luciferase, respectively. Results Interestingly, all hupsSL promoter deletion constructs showed heterocyst specific expression. Unexpectedly the shortest promoter fragment, a fragment covering 57 bp upstream and 258 bp downstream the tsp, exhibited the highest promoter activity. Deletion of the NtcA binding site neither affected the expression to any larger extent nor the heterocyst specificity. Conclusion Obtained data suggest that the hupSL promoter in N. punctiforme is not strictly dependent on the upstream NtcA cis element and that the shortest promoter fragment (-57 to tsp) is enough for a high and heterocyst specific expression of hupSL. This is highly interesting because it indicates that the information that determines heterocyst specific gene expression might be confined to this short sequence or in the downstream untranslated leader sequence. PMID:19284581

Characterization of the hupSL promoter activity in Nostoc punctiforme ATCC 29133

Directory of Open Access Journals (Sweden)

Lindberg Pia

2009-03-01

Full Text Available Abstract Background In cyanobacteria three enzymes are directly involved in the hydrogen metabolism; a nitrogenase that produces molecular hydrogen, H2, as a by-product of nitrogen fixation, an uptake hydrogenase that recaptures H2 and oxidize it, and a bidirectional hydrogenase that can both oxidize and produce H2.Nostoc punctiforme ATCC 29133 is a filamentous dinitrogen fixing cyanobacterium containing a nitrogenase and an uptake hydrogenase but no bidirectional hydrogenase. Generally, little is known about the transcriptional regulation of the cyanobacterial uptake hydrogenases. In this study gel shift assays showed that NtcA has a specific affinity to a region of the hupSL promoter containing a predicted NtcA binding site. The predicted NtcA binding site is centred at 258.5 bp upstream the transcription start point (tsp. To further investigate the hupSL promoter, truncated versions of the hupSL promoter were fused to either gfp or luxAB, encoding the reporter proteins Green Fluorescent Protein and Luciferase, respectively. Results Interestingly, all hupsSL promoter deletion constructs showed heterocyst specific expression. Unexpectedly the shortest promoter fragment, a fragment covering 57 bp upstream and 258 bp downstream the tsp, exhibited the highest promoter activity. Deletion of the NtcA binding site neither affected the expression to any larger extent nor the heterocyst specificity. Conclusion Obtained data suggest that the hupSL promoter in N. punctiforme is not strictly dependent on the upstream NtcA cis element and that the shortest promoter fragment (-57 to tsp is enough for a high and heterocyst specific expression of hupSL. This is highly interesting because it indicates that the information that determines heterocyst specific gene expression might be confined to this short sequence or in the downstream untranslated leader sequence.

Screening for biohydrogen production by cyanobacteria isolated from the Baltic Sea and Finnish lakes

Energy Technology Data Exchange (ETDEWEB)

Allahverdiyeva, Yagut; Leino, Hannu; Shunmugam, Sumathy; Aro, Eva-Mari [Department of Biochemistry and Food Chemistry, Plant Physiology and Molecular Biology, University of Turku, Tykistokatu 6 A, FIN-20014 Turku (Finland); Saari, Lyudmila; Fewer, David P.; Sivonen, Kaarina [Department of Applied Chemistry and Microbiology, University of Helsinki, P.O. Box 56, FI-00014 (Finland)

2010-02-15

Cyanobacteria are the only bacteria capable of performing oxygenic photosynthesis in which they harness solar energy and convert it into chemical energy stored in carbohydrates. Under specific conditions, cyanobacteria can use solar energy to produce also molecular hydrogen. Biodiversity among cyanobacteria for H{sub 2} production has not been efficiently studied. Here we report the screening of 400 cyanobacterial strains isolated from the Baltic Sea and Finnish lakes for efficient H{sub 2} producers. Approximately 50% of these strains produced detectable amounts of H{sub 2}. Ten strains produced similar or up to 4 times as much of H{sub 2} as the hydrogenase mutants of Anabaena PCC 7120 and Nostoc punctiforme ATCC 29133 specifically engineered in different laboratories to produce higher amounts of H{sub 2}. All ten H{sub 2} producers are N{sub 2}-fixing filamentous, heterocystous strains, seven of them are benthic and three are planktonic strains. Different culturing parameters, such as light intensity, cell density, pH and temperature had a pronounced effect on the H{sub 2} production rates of the two good H{sub 2} producers, Calothrix 336/3 and XPORK 5E strains. Notably, the culture conditions for optimal H{sub 2} production varied between different cyanobacterial strains. (author)

Comparative diversity and composition of nitrogen-fixing ...

African Journals Online (AJOL)

Three contrasting land use systems: reserve forests, rice fields and coal fields located at Upper Assam region of North East India were explored for documenting diversity and species composition of N2-fixing cyanobacteria. Altogether 24 taxa (16 heterocystous and 8 non-heterocystous) belonging to nine different genera ...

The Holocene sedimentary record of cyanobacterial glycolipids in the Baltic Sea: an evaluation of their application as tracers of past nitrogen fixation

Directory of Open Access Journals (Sweden)

M. Sollai

2017-12-01

Full Text Available Heterocyst glycolipids (HGs are lipids exclusively produced by heterocystous dinitrogen-fixing cyanobacteria. The Baltic Sea is an ideal environment to study the distribution of HGs and test their potential as biomarkers because of its recurring summer phytoplankton blooms, dominated by a few heterocystous cyanobacterial species of the genera Nodularia and Aphanizomenon. A multi-core and a gravity core from the Gotland Basin were analyzed to determine the abundance and distribution of a suite of selected HGs at a high resolution to investigate the changes in past cyanobacterial communities during the Holocene. The HG distribution of the sediments deposited during the Modern Warm Period (MoWP was compared with those of cultivated heterocystous cyanobacteria, including those isolated from Baltic Sea waters, revealing high similarity. However, the abundance of HGs dropped substantially with depth, and this may be caused by either a decrease in the occurrence of the cyanobacterial blooms or diagenesis, resulting in partial destruction of the HGs. The record also shows that the HG distribution has remained stable since the Baltic turned into a brackish semi-enclosed basin ∼ 7200 cal. yr BP. This suggests that the heterocystous cyanobacterial species composition remained relatively stable as well. During the earlier freshwater phase of the Baltic (i.e., the Ancylus Lake and Yoldia Sea phases, the distribution of the HGs varied much more than in the subsequent brackish phase, and the absolute abundance of HGs was much lower than during the brackish phase. This suggests that the cyanobacterial community adjusted to the different environmental conditions in the basin. Our results confirm the potential of HGs as a specific biomarker of heterocystous cyanobacteria in paleo-environmental studies.

Molecular Diffusion through Cyanobacterial Septal Junctions.

Science.gov (United States)

Nieves-Morión, Mercedes; Mullineaux, Conrad W; Flores, Enrique

2017-01-03

Heterocyst-forming cyanobacteria grow as filaments in which intercellular molecular exchange takes place. During the differentiation of N 2 -fixing heterocysts, regulators are transferred between cells. In the diazotrophic filament, vegetative cells that fix CO 2 through oxygenic photosynthesis provide the heterocysts with reduced carbon and heterocysts provide the vegetative cells with fixed nitrogen. Intercellular molecular transfer has been traced with fluorescent markers, including calcein, 5-carboxyfluorescein, and the sucrose analogue esculin, which are observed to move down their concentration gradient. In this work, we used fluorescence recovery after photobleaching (FRAP) assays in the model heterocyst-forming cyanobacterium Anabaena sp. strain PCC 7120 to measure the temperature dependence of intercellular transfer of fluorescent markers. We find that the transfer rate constants are directly proportional to the absolute temperature. This indicates that the "septal junctions" (formerly known as "microplasmodesmata") linking the cells in the filament allow molecular exchange by simple diffusion, without any activated intermediate state. This constitutes a novel mechanism for molecular transfer across the bacterial cytoplasmic membrane, in addition to previously characterized mechanisms for active transport and facilitated diffusion. Cyanobacterial septal junctions are functionally analogous to the gap junctions of metazoans. Although bacteria are frequently considered just as unicellular organisms, there are bacteria that behave as true multicellular organisms. The heterocyst-forming cyanobacteria grow as filaments in which cells communicate. Intercellular molecular exchange is thought to be mediated by septal junctions. Here, we show that intercellular transfer of fluorescent markers in the cyanobacterial filament has the physical properties of simple diffusion. Thus, cyanobacterial septal junctions are functionally analogous to metazoan gap junctions

Will Global Change Effect Primary Productivity in Coastal Ecosystems?

Science.gov (United States)

Rothschild, Lynn J.; Peterson, David L. (Technical Monitor)

1997-01-01

Algae are the base of coastal food webs because they provide the source of organic carbon for the remaining members of the community. Thus, the rate that they produce organic carbon to a large extent controls the productivity of the entire ecosystem. Factors that control algal productivity range from the physical (e.g., temperature, light), chemical (e.g., nutrient levels) to the biological (e.g., grazing). Currently, levels of atmospheric carbon dioxide surficial fluxes of ultraviolet radiation are rising. Both of these environmental variables can have a profound effect on algal productivity. Atmospheric carbon dioxide may increase surficial levels of dissolved inorganic carbon. Our laboratory and field studies of algal mats and phytoplankton cultures under ambient and elevated levels of pCO2 show that elevated levels of inorganic carbon can cause an increase in photosynthetic rates. In some cases, this increase will cause an increase in phytoplankton numbers. There may be an increase in the excretion of fixed carbon, which in turn may enhance bacterial productivity. Alternatively, in analogy with studies on the effect of elevated pCO2 on plants, the phytoplankton could change their carbon to nitrogen ratios, which will effect the feeding of the planktonic grazers. The seasonal depletion of stratospheric ozone has resulted in elevated fluxes of UVB radiation superimposed on the normal seasonal variation. Present surface UV fluxes have a significant impact on phytoplankton physiology, including the inhibition of the light and dark reactions of photosynthesis, inhibition of nitrogenase activity, inhibition of heterocyst formation, reduction in motility, increased synthesis of the UV-screening pigment scytonemin, and mutation. After reviewing these issues, recent work in our lab on measuring the effect of UV radiation on phytoplankton in the San Francisco Bay Estuary will be presented.

Visualization of channels connecting cells in filamentous nitrogen-fixing cyanobacteria.

Science.gov (United States)

Omairi-Nasser, Amin; Haselkorn, Robert; Austin, Jotham

2014-07-01

Cyanobacteria, formerly called blue-green algae, are abundant bacteria that carry out green plant photosynthesis, fixing CO2 and generating O2. Many species can also fix N2 when reduced nitrogen sources are scarce. Many studies imply the existence of intracellular communicating channels in filamentous cyanobacteria, in particular, the nitrogen-fixing species. In a species such as Anabaena, growth in nitrogen-depleted medium, in which ∼10% of the cells differentiate into anaerobic factories for nitrogen fixation (heterocysts), requires the transport of amino acids from heterocysts to vegetative cells, and reciprocally, the transport of sugar from vegetative cells to heterocysts. Convincing physical evidence for such channels has been slim. Using improved preservation of structure by high-pressure rapid freezing of samples for electron microscopy, coupled with high-resolution 3D tomography, it has been possible to visualize and measure the dimensions of channels that breach the peptidoglycan between vegetative cells and between heterocysts and vegetative cells. The channels appear to be straight tubes, 21 nm long and 14 nm in diameter for the latter and 12 nm long and 12 nm in diameter for the former.-Omairi-Nasser, A., Haselkorn, R., Austin, J. II. Visualization of channels connecting cells in filamentous nitrogen-fixing cyanobacteria. © FASEB.

Ecology and Evolution of Diatom-Associated Cyanobacteria Through Genetic Analyses

OpenAIRE

Hilton, Jason Andrew

2014-01-01

Primary production in a large fraction of the surface ocean communities is limited by the availability of nitrogen (N). Heterocyst-forming cyanobacteria associated with diatoms of the genera Hemiaulus, Rhizosolenia, and Chaetoceros can dominate surface communities throughout the global oceans, and are an important source of N to these communities. Additionally, these unique associations are directly linked to a highly efficient carbon export system. In order to study the nature and evolution ...

Effects of acetylene and carbon monoxide on long-term hydrogen production by Mastigocladus laminosus, a thermophilic blue-green alga

Energy Technology Data Exchange (ETDEWEB)

Miura, Y; Yokoyama, H; Takahara, K; Miyamoto, K

1982-01-01

Long-term H/sub 2/ production by a thermophilic and heterocystous blue-green alga (cyanobacterium) Mastigocladus laminosus was studied under the conditions when acetylene and carbon monoxide were supplemented to the gas phase of the culture vessel. The addition of both gases enhanced H/sub 2/ evolution by nitrogen-starved cells. The concentrations of acetylene and carbon monoxide in the gas phase of argon/CO/sub 2/ (97.5/2.5) were 10% and 0.2 to 1%, respectively, for the maximum H/sub 2/ production. Renewals of the gas phase, in addition to the addition of acetylene and carbon monoxide, were necessary for durable H/sub 2/ production. Since the concentrations of both H/sub 2/ and O/sub 2/ accumulated in the gas phase were minimized after the renewals, the H/sub 2/ uptake activity, which was not completely inhibited by acetylene and carbon monoxide, was reduced and thereby H/sub 2/ evolution was restored. Under such conditions, H/sub 2/ production for up to 20 days was observed under argon and N/sub 2/ atmospheres with average rats of 3.9 and 3.3..mu..l/mg dry wt/h, respectively. H/sub 2/ evolution for 15 days was observed even under an air atmosphere containing acetylene and carbon monoxide. It was thus shown that prolonged production of H/sub 2/ was possible by the use of a blue-green alga which exhibits a high activity of H/sub 2/ uptake under nitrogen-starved conditions.

Early diagenesis of bacteriohopanetetrol derivatives: Formation of fossil homohopanoids

NARCIS (Netherlands)

Sinninghe Damsté, J.S.; Duin, A.C.T. van; Hollander, D.; Kohnen, M.E.L.

1995-01-01

Diagenetic pathways of bacteriohopanepolyol derivatives are proposed based on the concentrations and 13C contents of homohopanes, homohop-17(21)-enes, benzohopanes, hopanoid thiophenes and sulphides, and macromolecularly S-bound homohopanes present in the extracts of twelve composite one metre

Fossilized intact polar lipids of photosynthetic organisms in ancient subsurface sediments

Science.gov (United States)

Bauersachs, T.; Schouten, S.; Hopmans, E. C.; Sinninghe Damsté, J. S.

2009-12-01

In recent years, the idea of a rich microbial biosphere in the marine sea floor has been widely accepted. This so-called “deep biosphere” is estimated to contain ca. 50 % of Earth’s total prokaryotic biomass with the overall order of magnitude of microbial cells in the sea floor being the same as the biomass of all surface plant life (Whitman et al. 1998). Evidence for the existence of a deep biosphere comes, among others, from the analysis of intact polar lipids (IPLs). This approach presumes that IPLs almost instantaneously lose their polar head group after cell death and thus do not preserve on geological timescales. Consequently, IPLs in the subsurface should derive from in situ production and hence indicate the presence of living prokaryotic cells. For example, in various oceanic subsurface sediments archaeal IPLs have been found, suggesting that Archaea constitute a major fraction of the deep biosphere biomass (Lipp et al. 2008). In this study, we found IPLs of heterocystous cyanobacteria in a number of ancient and deeply buried sediments. Heterocystous cyanobacteria are strictly photoautotrophic organisms that are a common constituent of the phytoplankton community in many freshwater and brackish environments but are also encountered in the marine realm as endosymbionts of diatom species. Under nitrogen-depleted conditions, these organisms carry out nitrogen fixation in specialized cells, known as heterocysts. These cells contain a suite of heterocyst glycolipids (HGs) that have not been identified in any other organism and are thus unique biological markers for nitrogen-fixing heterocystous cyanobacteria. Using high performance liquid chromatography coupled to electrospray ionisation tandem mass spectrometry (HPLC/ESI-MS/MS), we detected HGs in Pleistocene and Pliocene Mediterranean sapropels buried up to 60 m below the seafloor. In addition, these HGs were also found in lacustrine deposits of the Oligocene Lake Enspel (35 Ma), the Eocene Lake Messel

Dinitrogen fixation by blue-green algae from paddy fields

International Nuclear Information System (INIS)

Thomas, J.

1978-01-01

Fluorescence emission spectra at 77K of isolated heterocysts of Anabaena L-31 do not show F685-695 but rather F715-730, thus confirming the absence of photosystem II and the presence of photosystem I. Recent work using radioactive nitrogen has been collated and a tentative scheme is outlined indicating the location of the enzymes and the pathways involved in the initial assimilation of nitrogen in blue-green algae. Glutamine synthetase extracted from heterocysts of Anabaena L-31 does not exhibit the adenylylation/deadenylylation phenomenon characteristic of the enzyme from bacteria. Our recent experiments suggest that nitrogenase in Anabaena is under dual control by glutamic acid and aspartic acid, the former inhibiting the enzyme synthesis and the latter relieving the inhibition. Two extracellular polypeptides have been obtained from this alga, one of which inhibits heterocyst formation whereas the other enhances heterocyst formation and partially relieves the inhibitory effect of the former. An extracellular substance, possibly a glycopeptide, has been obtained from A. torulosa, which stimulates sporulation. Studies with 24 Na and 22 Na indicate that A. torulosa, an alga from saline habitats, has an active photosynthesis-linked mechanism for the extrusion of sodium. Sodium is essential for optimum nitrogenase activity and growth. In field experiments inoculation with Nostoc 4 resulted in substantial increase in soil nitrogen. Paddy yield was comparable to those plots where 80kg N/ha of urea was used. (author)

Characterization of the cyanobacteria and associated bacterial community from an ephemeral wetland in New Zealand.

Science.gov (United States)

Secker, Nick H; Chua, Jocelyn P S; Laurie, Rebecca E; McNoe, Les; Guy, Paul L; Orlovich, David A; Summerfield, Tina C

2016-10-01

New Zealand ephemeral wetlands are ecologically important, containing up to 12% of threatened native plant species and frequently exhibiting conspicuous cyanobacterial growth. In such environments, cyanobacteria and associated heterotrophs can influence primary production and nutrient cycling. Wetland communities, including bacteria, can be altered by increased nitrate and phosphate due to agricultural practices. We have characterized cyanobacteria from the Wairepo Kettleholes Conservation Area and their associated bacteria. Use of 16S rRNA amplicon sequencing identified several operational taxonomic units (OTUs) representing filamentous heterocystous and non-heterocystous cyanobacterial taxa. One Nostoc OTU that formed macroscopic colonies dominated the cyanobacterial community. A diverse bacterial community was associated with the Nostoc colonies, including a core microbiome of 39 OTUs. Identity of the core microbiome associated with macroscopic Nostoc colonies was not changed by the addition of nutrients. One OTU was highly represented in all Nostoc colonies (27.6%-42.6% of reads) and phylogenetic analyses identified this OTU as belonging to the genus Sphingomonas. Scanning electron microscopy showed the absence of heterotrophic bacteria within the Nostoc colony but revealed a diverse community associated with the colonies on the external surface. © 2016 Phycological Society of America.

NanoSIMS Analyses of Mo Indicate Nitrogenase Activity and Help Solve a N and C Fixation Puzzle in a Marine Cyanobacterium

Science.gov (United States)

Pett-Ridge, J.; Weber, P. K.; Finzi, J.; Hutcheon, I. D.; Capone, D. G.

2006-12-01

Diazotrophic cyanobacteria are capable of both CO2 and N2 fixation, yet must separate these two functions because the nitrogenase enzymes used in N2 fixation are strongly inhibited by O2 produced during photosynthesis. Some lineages, such as Anabaena, use specialized cells (heterocysts) to maintain functional segregation. However the mechanism of this segregation is poorly understood in Trichodesmium, a critical component of marine primary production in the tropical and subtropical North Atlantic. While some Trichodesmium studies suggest a temporal segregation of the nitrogen and carbon fixing processes, others indicate nitrogen fixation is spatially isolated in differentiated cells called diazocytes. In order to isolate the intracellular location of N fixation in both species, we used a combination of TEM, SEM and NanoSIMS analysis to map the distribution of C, N and Mo (a critical nitrogenase co-factor) isotopes in intact cells. NanoSIMS is a powerful surface analysis tool which combines nanometer-scale imaging resolution with the high sensitivity of mass spectrometry. Using cells grown in a 13CO^2 and 15N2 enriched atmosphere, our analyses indicate that in Anabaena, heterocysts are consistently enriched in Mo, and Mo accumulation suggests active N fixation (as opposed to N storage). In the non- heterocystous Trichodesmium, Mo is concentrated in sub-regions of individual cells, and is not associated with regions of N storage (cyanophycin granules). We suggest that NanoSIMS mapping of metal enzyme co- factors is a unique method of identifying physiological and morphological characteristics within individual bacterial cells. This combination of NanoSIMS analysis and high resolution microscopy allows isotopic analysis to be linked to morphological features and holds great promise for fine-scale studies of bacteria metabolism.

Novel Bacterial Proteins and Lipids Reveal the Diversity of Triterpenoid Biomarker Synthesis

Science.gov (United States)

Wei, J. H.; Banta, A. B.; Gill, C. C. C.; Giner, J. L.; Welander, P. V.

2017-12-01

Lipids preserved in sediments and rocks function as organic biomarkers providing evidence for the types of organisms that lived in ancient environments. We use a combined approach utilizing comparative genomics, molecular biology, and lipid analysis to discover novel cyclic triteprenoid lipids and their biosynthetic pathways in bacteria. Here, we present two cases of bacterial synthesis of pentacylic triterpenols previously thought to be indicative of eukaryotes, which address current incongruities in the fossil record. Cyclic triterpenoid lipids, such as hopanoids and sterols, are generally associated with bacteria and eukaryotes, respectively. The pentacyclic triterpenoid tetrahymanol, first discovered in the ciliate Tetrahymena pyriformis, and its diagenetic product gammacerane, have been previously interpreted as markers for eukaryotes and linked to water column stratification. Yet the occurrence of tetrahymanol in bacteria implies our knowledge of extant tetrahymanol producers is not complete. Through comparative genomics we identified a new gene required for tetrahymanol synthesis in the bacterium Methylomicrobium alcaliphilum. This gene encodes a novel enzyme, Tetrahymanol synthase (THS), that synthesizes tetrahymanol from the hopanoid diploptene demonstrating a pathway for tetrahymanol production in bacteria distinct from that in eukaryotes. We bionformatically identified THS homologs in 104 bacterial genomes and 472 metagenomes, implying a great diversity of tetrahymanol producers. Lipids of the arborane class, such as iso-arborinol, are commonly found in modern angiosperms. Arobranes are synthesized by the enzyme oxidosqualene cyclase (OSC), which in plants can form both tetra and pentacyclic molecules. While bacteria are known to produce tetracyclic sterol compounds, bacterial synthesis of pentacyclic arborane class triterpenols of this class were previously undiscovered. We have identified a bacterium, Eudoraea adriatica, whose OSC synthesizes

Photobiological hydrogen production and carbon dioxide sequestration

Science.gov (United States)

Berberoglu, Halil

irradiance and CO2 concentration. Kinetic models were successfully developed based on the Monod model and on a novel scaling analysis employing the CO2 consumption half-time as the time scale. Finally, the growth and hydrogen production of Anabaena variabilis have been compared in a flat panel photobioreactor using three different nutrient media under otherwise similar conditions. Light to hydrogen energy conversion efficiency for Allen-Arnon medium was superior by a factor of 5.5 to both BG-11 and BG-11o media. This was attributed to the presence of vanadium and larger heterocyst frequency observed in the Allen-Arnon medium.

Comparative genomics of Westiellopsis prolifica a freshwater cyanobacteria uncovers the prolific and distinctive metabolic potentials

Directory of Open Access Journals (Sweden)

Vineeta Verma

2017-10-01

Full Text Available Cyanobacteria are one of the ancient Micro-organisms that originated about 2.5 billion years ago. They are a very rich source for production of various natural compounds that are largely scalable in pharmaceutical and biotechnology industries. The unicellular Cyanobacteria are more ancient than the multicellular forms. In this study, we are exploring the genomes of a multi cellular, heterocystous, true branching Cyanobacteria, Westiellopsis prolifica belonging to order Nostocales. Complete genome is essential to serve as a reference for other sequencing projects and from which we can confirm the presence of various useful metabolic genes which are important for manufacturing pharmaceutical products. Here we report the draft assembly of Westiellopsis prolifica genome of 7.2 Mb with 19 scaffolds and the N50 and largest contig sizes are 2650655 bp and 3476031 bp, respectively. The phylogenomic studies from the literature reveal the closest relative of Westiellopsis prolifica are Fischerella sp. pcc 9431, Fischerella sp. pcc 9939 and Hapalosiphon welwitschii. Our preliminary comparative genomic analysis revealed that the sequence identity with the neighbouring clades were less, although we observed the large set of genes were syntenic and arranged in conserved in clusters. Genome mining on these organisms identified several clusters of NRPS, polyketide biosynthesis, two-component system, heterocyst differentiation genes and Nif genes were conserved in these genomes. We identified 21 clusters of secondary metabolites, which include NRPS and polyketide genes. For extraction of metabolites, we used several organic solvents. These extract contain various metabolic products which can be further exploited for the large scale production by genetic engineering approaches. Our Future work includes checking the RNAseq expressions of these metabolite producing genes.

Nitrogen fixation on a coral reef

Energy Technology Data Exchange (ETDEWEB)

Mague, T.H.; Holm-Hansen, O.

1975-06-01

Benthic, heterocystous blue-green algae (genera Calothrix, Hormothamnion and Nostoc) from Eniwetok Atoll were found to reduce acetylene at rapid rates. Slight acetylene reduction was associated with samples of Rhizoclonium (Chlorophyceae) and Oscillatoria (a cyanophyte lacking heterocysts), but this may have been due to contamination by epiphytes. There was virtually no acetylene reduction by phytoplankton, and nutrient enrichment experiments failed to selectively increase the numbers or activity of N/sub 2/-fixing algae in surface water samples. The Nostoc required light for acetylene reduction. Nitrogen fixation by this species could have supplied up to 11 ..mu..g N/cm/sup 2//day to the ecosystem. (auth)

Hydrogen production by the engineered cyanobacterial strain Nostoc PCC 7120 ΔhupW examined in a flat panel photobioreactor system.

Science.gov (United States)

Nyberg, Marcus; Heidorn, Thorsten; Lindblad, Peter

2015-12-10

Nitrogenase based hydrogen production was examined in a ΔhupW strain of the filamentous heterocystous cyanobacterium Nostoc PCC 7120, i.e., cells lacking the last step in the maturation system of the large subunit of the uptake hydrogenase and as a consequence with a non-functional uptake hydrogenase. The cells were grown in a developed flat panel photobioreactor system with 3.0L culture volume either aerobically (air) or anaerobically (Ar or 80% N2/20% Ar) and illuminated with a mixture of red and white LED. Aerobic growth of the ΔhupW strain of Nostoc PCC 7120 at 44μmolar photons m(-2)s(-1) PAR gave the highest hydrogen production of 0.7mL H2 L(-1)h(-1), 0.53mmol H2 mg chlorophyll a(-1)h(-1), and a light energy conversion efficiency of 1.2%. Anaerobic growth using 100% argon showed a maximal hydrogen production of 1.7mLL(-1)h(-1), 0.85mmol per mg chlorophyll a(-1) h(-1), and a light energy conversion efficiency of 2.7%. Altering between argon/N2 (20/80) and 100% argon phases resulted in a maximal hydrogen production at hour 128 (100% argon phase) with 6.2mL H2L(-1)h(-1), 0.71mL H2 mg chlorophyll a(-1)h(-1), and a light energy efficiency conversion of 4.0%. The highest buildup of hydrogen gas observed was 6.89% H2 (100% argon phase) of the total photobioreactor system with a maximal production of 4.85mL H2 L(-1)h(-1). The present study clearly demonstrates the potential to use purpose design cyanobacteria in developed flat panel photobioreactor systems for the direct production of the solar fuel hydrogen. Further improvements in the strain used, environmental conditions employed, and growth, production and collection systems used, are needed before a sustainable and economical cyanobacterial based hydrogen production can be realized. Copyright © 2015 Elsevier B.V. All rights reserved.

Biochemical changes induced by fungicides in nitrogen fixing Nostoc sp.

Science.gov (United States)

Deviram, G V N S; Pant, Gaurav; Prasuna, R Gyana

2013-01-01

The present study indicates the effect of fungicides (approved by WHO) and their behavior on nitrogen fixer of rice eco system Nostoc sp. Application of plant protecting chemicals at recommended levels braced up the growth of blue green algae thereby enhancing heterocyst formation and nitrogenase activity. Nostoc sp demoed varying degrees of sensitivity to fungicides. Biomass yield, protein, carbohydrate content reduced after 3pg/mL concentration. Heterocyst damage was observed from 4μg/mL, Proline content increased with increase in fungicide concentration, utmost yellowing of the culture started from 4μg/mL. The decreasing order of the toxicity to Nostoc sp with fungicides was Mancozeb> Ediphenphos> Carbendazim> Hexaconazole.

Production of Metabolites as Bacterial Responses to the Marine Environment

Directory of Open Access Journals (Sweden)

Pedro Fernandes

2010-03-01

Full Text Available Bacteria in marine environments are often under extreme conditions of e.g., pressure, temperature, salinity, and depletion of micronutrients, with survival and proliferation often depending on the ability to produce biologically active compounds. Some marine bacteria produce biosurfactants, which help to transport hydrophobic low water soluble substrates by increasing their bioavailability. However, other functions related to heavy metal binding, quorum sensing and biofilm formation have been described. In the case of metal ions, bacteria developed a strategy involving the release of binding agents to increase their bioavailability. In the particular case of the Fe3+ ion, which is almost insoluble in water, bacteria secrete siderophores that form soluble complexes with the ion, allowing the cells to uptake the iron required for cell functioning. Adaptive changes in the lipid composition of marine bacteria have been observed in response to environmental variations in pressure, temperature and salinity. Some fatty acids, including docosahexaenoic and eicosapentaenoic acids, have only been reported in prokaryotes in deep-sea bacteria. Cell membrane permeability can also be adapted to extreme environmental conditions by the production of hopanoids, which are pentacyclic triterpenoids that have a function similar to cholesterol in eukaryotes. Bacteria can also produce molecules that prevent the attachment, growth and/or survival of challenging organisms in competitive environments. The production of these compounds is particularly important in surface attached strains and in those in biofilms. The wide array of compounds produced by marine bacteria as an adaptive response to demanding conditions makes them suitable candidates for screening of compounds with commercially interesting biological functions. Biosurfactants produced by marine bacteria may be helpful to increase mass transfer in different industrial processes and in the bioremediation of

Production of squalene in Synechocystis sp. PCC 6803.

Directory of Open Access Journals (Sweden)

Elias Englund

Full Text Available In recent years, there has been an increased interest in the research and development of sustainable alternatives to fossil fuels. Using photosynthetic microorganisms to produce such alternatives is advantageous, since they can achieve direct conversion of carbon dioxide from the atmosphere into the desired product, using sunlight as the energy source. Squalene is a naturally occurring 30-carbon isoprenoid, which has commercial use in cosmetics and in vaccines. If it could be produced sustainably on a large scale, it could also be used instead of petroleum as a raw material for fuels and as feedstock for the chemical industry. The unicellular cyanobacterium Synechocystis PCC 6803 possesses a gene, slr2089, predicted to encode squalene hopene cyclase (Shc, an enzyme converting squalene into hopene, the substrate for forming hopanoids. Through inactivation of slr2089 (shc, we explored the possibility to produce squalene using cyanobacteria. The inactivation led to accumulation of squalene, to a level over 70 times higher than in wild type cells, reaching 0.67 mg OD750(-1 L(-1. We did not observe any significant growth deficiency in the Δshc strain compared to the wild type Synechocystis, even at high light conditions, suggesting that the observed squalene accumulation was not detrimental to growth, and that formation of hopene by Shc is not crucial for growth under normal conditions, nor for high-light stress tolerance. Effects of different light intensities and growth stages on squalene accumulation in the Δshc strain were investigated. We also identified a gene, sll0513, as a putative squalene synthase in Synechocystis, and verified its function by inactivation. In this work, we show that it is possible to use the cyanobacterium Synechocystis to generate squalene, a hydrocarbon of commercial interest and a potential biofuel. We also report the first identification of a squalene hopene cyclase, and the second identification of squalene synthase

Inactivation of uptake hydrogenase leads to enhanced and sustained hydrogen production with high nitrogenase activity under high light exposure in the cyanobacterium Anabaena siamensis TISTR 8012

Directory of Open Access Journals (Sweden)

Khetkorn Wanthanee

2012-10-01

Full Text Available Abstract Background Biohydrogen from cyanobacteria has attracted public interest due to its potential as a renewable energy carrier produced from solar energy and water. Anabaena siamensis TISTR 8012, a novel strain isolated from rice paddy field in Thailand, has been identified as a promising cyanobacterial strain for use as a high-yield hydrogen producer attributed to the activities of two enzymes, nitrogenase and bidirectional hydrogenase. One main obstacle for high hydrogen production by A. siamensis is a light-driven hydrogen consumption catalyzed by the uptake hydrogenase. To overcome this and in order to enhance the potential for nitrogenase based hydrogen production, we engineered a hydrogen uptake deficient strain by interrupting hupS encoding the small subunit of the uptake hydrogenase. Results An engineered strain lacking a functional uptake hydrogenase (∆hupS produced about 4-folds more hydrogen than the wild type strain. Moreover, the ∆hupS strain showed long term, sustained hydrogen production under light exposure with 2–3 folds higher nitrogenase activity compared to the wild type. In addition, HupS inactivation had no major effects on cell growth and heterocyst differentiation. Gene expression analysis using RT-PCR indicates that electrons and ATP molecules required for hydrogen production in the ∆hupS strain may be obtained from the electron transport chain associated with the photosynthetic oxidation of water in the vegetative cells. The ∆hupS strain was found to compete well with the wild type up to 50 h in a mixed culture, thereafter the wild type started to grow on the relative expense of the ∆hupS strain. Conclusions Inactivation of hupS is an effective strategy for improving biohydrogen production, in rates and specifically in total yield, in nitrogen-fixing cultures of the cyanobacterium Anabaena siamensis TISTR 8012.

Occurrence of cyanobacteria (Richelia intracellularis)-diatom (Rhizosolenia hebetata) consortium in the Palk Bay, southeast coast of India

Digital Repository Service at National Institute of Oceanography (India)

Madhu, N.V.; Paul, M.; Ullas, N.; Ashwini, R.; Rehitha, T.V.

Symbiotic association of heterocystous cyanobacterium, Richelia intracellularis Schmidt with oceanic centric diatom, Rhizosolenia hebetata is reported from the Palk Bay, southeast coast of India. One to six trichomes of R. intracellularis were...

Growth kinetic and fuel quality parameters as selective criterion for screening biodiesel producing cyanobacterial strains.

Science.gov (United States)

Gayathri, Manickam; Shunmugam, Sumathy; Mugasundari, Arumugam Vanmathi; Rahman, Pattanathu K S M; Muralitharan, Gangatharan

2018-01-01

The efficiency of cyanobacterial strains as biodiesel feedstock varies with the dwelling habitat. Fourteen indigenous heterocystous cyanobacterial strains from rice field ecosystem were screened based on growth kinetic and fuel parameters. The highest biomass productivity was obtained in Nostoc punctiforme MBDU 621 (19.22mg/L/day) followed by Calothrix sp. MBDU 701 (13.43mg/L/day). While lipid productivity and lipid content was highest in Nostoc spongiaeforme MBDU 704 (4.45mg/L/day and 22.5%dwt) followed by Calothrix sp. MBDU 701 (1.54mg/L/day and 10.75%dwt). Among the tested strains, Nostoc spongiaeforme MBDU 704 and Nostoc punctiforme MBDU 621 were selected as promising strains for good quality biodiesel production by Preference Ranking Organization Method for Enrichment Evaluation (PROMETHEE) and Graphical Analysis for Interactive Assistance (GAIA) analysis. Copyright © 2017 Elsevier Ltd. All rights reserved.

Bacteriohopanepolyols along redox gradients in the Humboldt Current System off northern Chile.

Science.gov (United States)

Matys, E D; Sepúlveda, J; Pantoja, S; Lange, C B; Caniupán, M; Lamy, F; Summons, R E

2017-11-01

Marine oxygen minimum zones (OMZs) are characterized by the presence of subsurface suboxic or anoxic waters where diverse microbial processes are responsible for the removal of fixed nitrogen. OMZs have expanded over past decades and are expected to continue expanding in response to the changing climate. The implications for marine biogeochemistry, particularly nitrogen cycling, are uncertain. Cell membrane lipids (biomarkers), such as bacterial bacteriohopanepolyols (BHPs) and their degradation products (hopanoids), have distinctive structural attributes that convey information about their biological sources. Since the discovery of fossil hopanoids in ancient sediments, the study of BHPs has been of great biogeochemical interest due to their potential to serve as proxies for bacteria in the geological record. A stereoisomer of bacteriohopanetetrol (BHT), BHT II, has been previously identified in OMZ waters and has as been unequivocally identified in culture enrichments of anammox bacteria, a key group contributing to nitrogen loss in marine OMZs. We tested BHT II as a proxy for suboxia/anoxia and anammox bacteria in suspended organic matter across OMZ waters of the Humboldt Current System off northern Chile, as well as in surface and deeply buried sediments (125-150 ky). The BHT II ratio (BHT II/total BHT) increases as oxygen content decreases through the water column, consistent with previous results from Perú, the Cariaco Basin and the Arabian Sea, and in line with microbiological evidence indicating intense anammox activity in the Chilean OMZ. Notably, BHT II is transported from the water column to surface sediments, and preserved in deeply buried sediments, where the BHT II ratio correlates with changes in δ 15 N sediment values during glacial-interglacial transitions. This study suggests that BHT II offers a proxy for past changes in the relative importance of anammox, and fluctuations in nitrogen cycling in response to ocean redox changes through the

Dinitrogen fixation by blue-green algae from paddy fields

International Nuclear Information System (INIS)

Thomas, Joseph

1977-01-01

Recent work using radioactive nitrogen on the blue-green algae of paddy fields has been reviewed. These algae fix dinitrogen and photoassimilate carbon evolving oxygen, thereby augmenting nitrogen and carbon status of the soil and also providing oxygen to the water-logged rice paddies. Further studies using radioactive isotopes 13 N, 24 Na and 22 Na on their nitrogen fixation, nitrogen assimilation pathways; regulation of nitrogenase, heterocysts production and sporulation and sodium transport and metabolism have been carried out and reported. The field application of blue green algae for N 2 fixation was found to increase the status of soil nitrogen and yield of paddy. (M.G.B.)

Time-dependent growth of crystalline Au0-nanoparticles in cyanobacteria as self-reproducing bioreactors: 2. Anabaena cylindrica

Directory of Open Access Journals (Sweden)

Liz M. Rösken

2016-03-01

Full Text Available Microbial biosynthesis of metal nanoparticles as needed in catalysis has shown its theoretical ability as an extremely environmentally friendly production method in the last few years, even though the separation of the nanoparticles is challenging. Biosynthesis, summing up biosorption and bioreduction of diluted metal ions to zero valent metals, is especially ecofriendly, when the bioreactor itself is harmless and needs no further harmful reagents. The cyanobacterium Anabaena cylindrica (SAG 1403.2 is able to form crystalline Au0-nanoparticles from Au3+ ions and does not release toxic anatoxin-a. X-ray powder diffraction (XRD, transmission electron microscopy (TEM and laser-induced breakdown spectroscopy (LIBS are applied to monitor the time-dependent development of gold nanoparticles for up to 40 hours. Some vegetative cells (VC are filled with nanoparticles within minutes, while the extracellular polymeric substances (EPS of vegetative cells and the heterocyst polysaccharide layer (HEP are the regions, where the first nanoparticles are detected on most other cells. The uptake of gold starts immediately after incubation and within four hours the average size remains constant around 10 nm. Analyzing the TEM images with an image processing program reveals a wide distribution for the diameter of the nanoparticles at all times and in all regions of the cyanobacteria. Finally, the nanoparticle concentration in vegetative cells of Anabaena cylindrica is about 50% higher than in heterocysts (HC. These nanoparticles are found to be located along the thylakoid membranes.

Time-dependent growth of crystalline Au(0)-nanoparticles in cyanobacteria as self-reproducing bioreactors: 2. Anabaena cylindrica.

Science.gov (United States)

Rösken, Liz M; Cappel, Felix; Körsten, Susanne; Fischer, Christian B; Schönleber, Andreas; van Smaalen, Sander; Geimer, Stefan; Beresko, Christian; Ankerhold, Georg; Wehner, Stefan

2016-01-01

Microbial biosynthesis of metal nanoparticles as needed in catalysis has shown its theoretical ability as an extremely environmentally friendly production method in the last few years, even though the separation of the nanoparticles is challenging. Biosynthesis, summing up biosorption and bioreduction of diluted metal ions to zero valent metals, is especially ecofriendly, when the bioreactor itself is harmless and needs no further harmful reagents. The cyanobacterium Anabaena cylindrica (SAG 1403.2) is able to form crystalline Au(0)-nanoparticles from Au(3+) ions and does not release toxic anatoxin-a. X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and laser-induced breakdown spectroscopy (LIBS) are applied to monitor the time-dependent development of gold nanoparticles for up to 40 hours. Some vegetative cells (VC) are filled with nanoparticles within minutes, while the extracellular polymeric substances (EPS) of vegetative cells and the heterocyst polysaccharide layer (HEP) are the regions, where the first nanoparticles are detected on most other cells. The uptake of gold starts immediately after incubation and within four hours the average size remains constant around 10 nm. Analyzing the TEM images with an image processing program reveals a wide distribution for the diameter of the nanoparticles at all times and in all regions of the cyanobacteria. Finally, the nanoparticle concentration in vegetative cells of Anabaena cylindrica is about 50% higher than in heterocysts (HC). These nanoparticles are found to be located along the thylakoid membranes.

Localization of calcium in the cyanobiont and gonidial zone of Cycas revoluta Thunb. by microelectrodes, chlorotetracycline, electron spectroscopic imaging and electron energy loss spectroscopy

International Nuclear Information System (INIS)

Caiola, M.G.; Canini, A.; Brandizzi, F.

1994-01-01

Ionic calcium concentration was measured in the gonidial zone of fresh coralloid roots by means of calcium microelectrodes. It was 10 -6 M in the apical segments of coralloid roots and increased to 10 -5 M in the gonidial zones of median and basal segments. Loosely membrane-bound calcium was evidenced by using chloro-tetracycline (CTC) or ethylene glycol-bis-(β-aminoethyl ether)-N,N,N',N'-tetraacetic acid (EGTA) and CTC, in cell walls of columnar cells of Cycas and in the cytoplasm of cyanobiont. Sub-cellular localization of calcium was obtained by electron spectroscopic imaging (ESI) and electron energy loss spectroscopy (EELS) analyses applied at transmission electron microscopy on thin, unstained sections of gonidial zone of coralloid roots. By means of these techniques, bound-calcium was detected inside the mucilage of apical and median segments whereas, in the basal segments, it was completely absent. In the heterocysts of apical segments of coralloid, calcium was localized on the envelope, cell walls, thylakoids and cyanophycin granules. In the gonidial zone of the basal segments, dead or degenerating heterocysts completely lacked calcium. Therefore, the high ionic calcium amounts detected in the gonidial zone of median and basal segments could represent a minor calcium uptake by the cells or release by lysed ones. The decreases in nitrogenase activity recorded in the median and basal segments of the coralloid roots paralleled the decrease in calcium amount in heterocyst envelope. (authors)

A highly asynchronous developmental program triggered during germination of dormant akinetes of filamentous diazotrophic cyanobacteria

Czech Academy of Sciences Publication Activity Database

Perez, Rebeca; Wörmer, L.; Sass, P.; Maldener, I.

2018-01-01

Roč. 94, č. 1 (2018), č. článku fix131. ISSN 0168-6496 Institutional support: RVO:61388971 Keywords : akinetes * germination * heterocyst Subject RIV: EE - Microbiology, Virology OBOR OECD: Microbiology Impact factor: 3.720, year: 2016

Nutrient control of cyanobacterial blooms in the Baltic Sea

NARCIS (Netherlands)

Stal, L.J.; Staal, M.J.; Villbrandt, M.

1999-01-01

Cyanobacterial blooms in the Baltic Sea were investigated with respect to growth Limitation and nitrogen fixation. The community was composed predominantly of Synechococcus spp., and large, heterocystous, nitrogen-fixing cyanobacteria (Aphanizomenon spp, and Nodularia spp.), that usually formed

First report of an Anabaena Bory strain containing microcystin-LR in a freshwater body in Africa

CSIR Research Space (South Africa)

Oberholster, Paul J

2015-03-11

Full Text Available algae belonged to the genus Anabaena, a family of filamentous cyanobacteria known to produce cyanotoxins such as anatoxin-a, harmful to humans and the aquatic foodweb. The specimens isolated lacked the characteristic akinetes and/or heterocysts...

Horizontal transfer of the nitrogen fixation gene cluster in the cyanobacterium Microcoleus chthonoplastes

NARCIS (Netherlands)

Bolhuis, H.; Severin, I.; Confurius-Guns, V.; Wollenzien, U.I.A.; Stal, L.J.

2010-01-01

The filamentous, non-heterocystous cyanobacterium Microcoleus chthonoplastes is a cosmopolitan organism, known to build microbial mats in a variety of different environments. Although most of these cyanobacterial mats are known for their capacity to fix dinitrogen, M. chthonoplastes has not been

Occurrence of C35-C45 polyprenols in filamentous and unicellular cyanobacteria

NARCIS (Netherlands)

Bauersachs, T.; Schouten, S.; Compaoré, J.; Stal, L.J.; Sinninghe Damsté, J.S.

2010-01-01

Polyprenols, regular (head-to-tail) isoprenoid alcohols with 7-9 prenyl units, were tentatively identified in several cultivated cyanobacteria Heptaprenol (C35), octaprenol (C40) and a suite of nonaprenols (C45) were present in unicellular and filamentous non-heterocystous cyanobacteria, while they

Occurrence of C35-C45 polyprenols in filamentous and unicellular cyanobacteria

NARCIS (Netherlands)

Bauersachs, T.; Schouten, S.; Compaore, J.; Stal, L.J.; Sinninghe Damsté, J.S.

2010-01-01

Polyprenols, regular (head-to-tail) isoprenoid alcohols with 7–9 prenyl units, were tentatively identified in several cultivated cyanobacteria. Heptaprenol (C35), octaprenol (C40) and a suite of nonaprenols (C45) were present in unicellular and filamentous non-heterocystous cyanobacteria, while they

Characterization of rhizo-cyanobacteria and their associations with ...

African Journals Online (AJOL)

Four heterocystous cyanobacteria, belonging to the genera Anabaena and Nostoc isolated from the rhizosphere of wheat, were tested for their ability to form associations with the roots of wheat seedlings under light and dark conditions using hydroponics. The cyanobacterial strains formed close associations with wheat ...

Cyanobacterial photosynthesis under sulfidic conditions: insights from the isolate Leptolyngbya sp. strain hensonii

OpenAIRE

Hamilton, Trinity L; Klatt, Judith M; de Beer, Dirk; Macalady, Jennifer L

2018-01-01

We report the isolation of a pinnacle-forming cyanobacterium isolated from a microbial mat covering the sediment surface at Little Salt Spring—a flooded sinkhole in Florida with a perennially microoxic and sulfidic water column. The draft genome of the isolate encodes all of the enzymatic machinery necessary for both oxygenic and anoxygenic photosynthesis, as well as genes for methylating hopanoids at the C-2 position. The physiological response of the isolate to H2S is complex: (i) no induct...

Nitrogen-fixing cyanobacterium with a high phycoerythrin content.

Science.gov (United States)

Rodriguez, H; Rivas, J; Guerrero, M G; Losada, M

1989-03-01

The elemental and molecular composition, pigment content, and productivity of a phycoerythrin-rich nitrogen-fixing cyanobacterium-an Anabaena strain isolated from the coastal lagoon Albufera de Valencia, Spain-has been investigated. When compared with other heterocystous species, this strain exhibits similar chlorophyll a, carotene, and total phycobiliprotein contents but differs remarkably in the relative proportion of specific phycobiliproteins; the content of C-phycoerythrin amounts to 8.3% (versus about 1% in the other species) of cell dry weight. Absorption and fluorescence spectra of intact phycobilisomes isolated from this Anabaena sp. corroborate the marked contribution of phycoerythrin as an antenna pigment, a circumstance that is unusual for cyanobacteria capable of fixing N(2). The pigment content of cells is affected by variations in irradiance and cell density, these adaptive changes being more patent for C-phycoerythrin than for phycocyanins. The Anabaena strain is clumpy and capable of rapid flocculation. It exhibits outdoor productivities higher than 20 g (dry weight) m day during summer.

Oil(Gas) - source rock correlation technique

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-01

The overview of bio-marker parameters which are applicable to hydrocarbon exploration has been illustrated. Experimental analysis of saturated hydrocarbon and bio-markers of the Pohang E and F core samples has been carried out. Samples were extracted by stirring in dichloromethane at 40-50 degree for 10 hours. The saturated, aromatic and resin fractions of the extract were obtained using thin layer chromatograms. The relative abundance of normal alkane fraction of the samples is low except lowest interval, which is probably due to the biodegradation. The bio-marker assemblage of hopanoids and steranes has been characterized. According to the analysis of saturated hydrocarbons and bio-markers, the sedimentary environment of the Pohang core samples is marine and transitional zone except the terrestrial environment of the lowest samples such as 610.5 m from E core and 667.2 m from F core. The thermal maturity through the studied interval did not reach oil window even though slight increase in thermal maturity with depth, which coincide with Rock Eval pyrolysis data. In order to check the validation of analysis of the bio-markers, same samples were analyzed by the University of Louis Pasteur, France. The distribution and relative peak area of the bio-markers were identical with those by laboratory of KIGAM. For the 2 nd stage of the research, analysis of bio-markers other than hopanoids and steranes should be continued. (author). 29 figs., 7 tabs.

Role of Two Cell Wall Amidases in Septal Junction and Nanopore Formation in the Multicellular Cyanobacterium Anabaena sp. PCC 7120

Directory of Open Access Journals (Sweden)

Jan Bornikoel

2017-09-01

Full Text Available Filamentous cyanobacteria have developed a strategy to perform incompatible processes in one filament by differentiating specialized cell types, N2-fixing heterocysts and CO2-fixing, photosynthetic, vegetative cells. These bacteria can be considered true multicellular organisms with cells exchanging metabolites and signaling molecules via septal junctions, involving the SepJ and FraCD proteins. Previously, it was shown that the cell wall lytic N-acetylmuramyl-L-alanine amidase, AmiC2, is essential for cell–cell communication in Nostoc punctiforme. This enzyme perforates the septal peptidoglycan creating an array of nanopores, which may be the framework for septal junction complexes. In Anabaena sp. PCC 7120, two homologs of AmiC2, encoded by amiC1 and amiC2, were identified and investigated in two different studies. Here, we compare the function of both AmiC proteins by characterizing different Anabaena amiC mutants, which was not possible in N. punctiforme, because there the amiC1 gene could not be inactivated. This study shows the different impact of each protein on nanopore array formation, the process of cell–cell communication, septal protein localization, and heterocyst differentiation. Inactivation of either amidase resulted in significant reduction in nanopore count and in the rate of fluorescent tracer exchange between neighboring cells measured by FRAP analysis. In an amiC1 amiC2 double mutant, filament morphology was affected and heterocyst differentiation was abolished. Furthermore, the inactivation of amiC1 influenced SepJ localization and prevented the filament-fragmentation phenotype that is characteristic of sepJ or fraC fraD mutants. Our findings suggest that both amidases are to some extent redundant in their function, and describe a functional relationship of AmiC1 and septal proteins SepJ and FraCD.

Archaeal and bacterial diversity in two hot spring microbial mats from a geothermal region in Romania.

Science.gov (United States)

Coman, Cristian; Drugă, Bogdan; Hegedus, Adriana; Sicora, Cosmin; Dragoş, Nicolae

2013-05-01

The diversity of archaea and bacteria was investigated in two slightly alkaline, mesophilic hot springs from the Western Plain of Romania. Phylogenetic analysis showed a low diversity of Archaea, only three Euryarchaeota taxa being detected: Methanomethylovorans thermophila, Methanomassiliicoccus luminyensis and Methanococcus aeolicus. Twelve major bacterial groups were identified, both springs being dominated by Cyanobacteria, Chloroflexi and Proteobacteria. While at the phylum/class-level the microbial mats share a similar biodiversity; at the species level the geothermal springs investigated seem to be colonized by specific consortia. The dominant taxa were filamentous heterocyst-containing Fischerella, at 45 °C and non-heterocyst Leptolyngbya and Geitlerinema, at 55 °C. Other bacterial taxa (Thauera sp., Methyloversatilis universalis, Pannonibacter phragmitetus, Polymorphum gilvum, Metallibacterium sp. and Spartobacteria) were observed for the first time in association with a geothermal habitat. Based on their bacterial diversity the two mats were clustered together with other similar habitats from Europe and part of Asia, most likely the water temperature playing a major role in the formation of specific microbial communities that colonize the investigated thermal springs.

Microbes in a bottle: Where model organisms and analog systems meet

Science.gov (United States)

Hamilton, T. L.; Weber, M.; Lott, C.; Havig, J. R.; Clark, C.; Bird, L. R.; de Beer, D.; Dron, A.; Freeman, K. H.; Macalady, J. L.

2015-12-01

Understanding the evolution of the Earth's surface chemistry is one of the most exciting challenges in modern geoscience. The Great Oxidation Event occurred ~2.5 Ga, when the concentration of oxygen in the atmosphere increased from productivity and the remineralization of organic matter are intimately linked to planetary redox and thus to levels of O2. As a result, biologic carbon isotope fractionation and other biomarkers (i.e. hopanoids) facilitate our interpretation of biogeochemical cycling during the Proterozoic Eon. Here, we describe the isolation and characterization of two photoautotrophs—the dominant primary producers—from a Proterozoic Ocean analog. We examined the 13C fractionation in the microbial mat and employed in situ microcosms to estimate primary productivity. In addition, we deployed diver-operated microsensors to determine oxygen production and sulfide consumption over a 24-hour cycle and sequenced total RNA from 4 time points. Using these data, we examined primary production in pure cultures of the dominant Cyanobacteria and green sulfur bacteria from the mat under conditions that mimic those observed in situ. We use this information to begin to build a model of oxygen production and organic carbon burial in a Proterozoic-like environment where Cyanobacteria can contribute to primary productivity in the absence of oxygen production. Furthermore, we examined the differences between 13C fractionation in cultures maintained under "ideal" conditions compared to those observed in situ. Collectively, the RNA sequencing data, the in situ primary productivity data and pure culture information were necessary to interpret the 13C signal from the mats.

Toxicity of nickel and silver to Nostoc muscorum: interaction with ascorbic acid, glutathione, and sulfur-containing amino acids.

Science.gov (United States)

Rai, L C; Raizada, M

1987-08-01

Exposure of Nostoc muscorum to different concentrations of Ni and Ag brought about reduction in growth, carbon fixation, heterocyst production, and nitrogenase activity and increase in the loss of ions (K+, Na+). In an attempt to ameliorate the toxicity of test metals by ascorbic acid, glutathione, and sulfur-containing amino acids (L-cysteine and L-methionine), it was found that the level of protection by ascorbic acid and glutathione was more for Ag than Ni. However, metal-induced inhibition of growth and carbon fixation was equally ameliorated by methionine. But the level of protection by cysteine was quite different, i.e., 27% for Ni and 22% for Ag. Protection of metal toxicity in N. muscorum by amino acids lends further support to self-detoxifying ability of cyanobacteria because they are known to synthesize all essential amino acids.

The effect of aromatization on the isotopic compositions of hydrocarbons during early diagenesis

Science.gov (United States)

Freeman, K. H.; Boreham, C. J.; Summons, R. E.; Hayes, J. M.

1994-01-01

Polycyclic aromatic hydrocarbons with varying degrees of aromatization were isolated from the Eocene Messel Shale (Rheingraben, Germany). The high abundances of these compounds and their structural resemblances to cyclic triterpenoid lipids are consistent with derivation from microbial rather than thermal processes. Compounds structurally related to oleanane contain from five to nine double bonds; those within a series of aromatized hopanoids contain from three to nine. All are products of diagenetic reactions that remove hydrogen or methyl groups, and, in several cases, break carbon-carbon bonds to open rings. Aromatized products are on average depleted in 13C relative to possible precursors by l.2% (range: l.5% enrichment to 4% depletion, n = 9). The dependence of 13C content on the number of double bonds is not, however, statistically significant and it must be concluded that there is no strong evidence for isotopic fractionation accompanying diagenetic aromatization. Isotopic differences between series (structures related to ursane, des-A-ursane, des-A-lupane, des-A-arborane, and possibly, des-A-gammacerane are present) are much greater, indicating that 13C contents are controlled primarily by source effects. Fractionations due to chromatographic isotope effects during HPLC ranged from 0.1 to 2.8%.

Pertumbuhan dan Keseragaman Warna Bulu Ayam Persilangan Balik (BC2 Hasil Seleksi Genetik Persilangan Ayam Pelung dengan Ayam Pedaging (GROWTH AND PLUMAGE COLOR UNIFORMITY OF BACK CROSS (BC2CHICKEN RESULTED FROM GENETICS SELECTION OF PELUNG CHICKEN

Directory of Open Access Journals (Sweden)

Ayudha Bahana I. Perdamaian

2018-01-01

Full Text Available Research aim to derive an excellent hybrid to be positioned as meat-type chicken. An excellent breed which possess uniform morphological character was archived by genetic selection through back-crossed mating shceme in focus on growth rate and plumage color uniformity. Day Old Chicken (DOC resulted from parent stock broiler cobb 500 and Pelung chicken originated from Cianjur district, West java mating were intensively reared for seven week from hatch. Each chicken weighted every seven day and morphological character assessed at seven weeks old. Observe variable are heterocyst, coefficient Inbreeding (Fx, Inbreeding rate (F, plumage and shank characteristic proportion, and its frequency gene alteration through selection. After serial genetic selection, the BC2 chicken has 1129 g body weight and uniform morphological character. Overall body weight of BC3 chicken offspring from BC2 and F1 was deteriorated compared its broiler predecessor because of Inbreeding depression (Fx: 0.4375; F: 0.3125 and heterocyst decrement (H: -39.33 however, morphological appearance were highly resemble pelung chicken. Based on these finding, BC2 chicken was promised meat-type hybrid chicken which has fast growth rate and similar morphological character.

Parameters for Martini sterols and hopanoids based on a virtual-site description

NARCIS (Netherlands)

Melo, M. N.; Ingolfsson, H. I.; Marrink, S. J.

2015-01-01

Sterols play an essential role in modulating bilayer structure and dynamics. Coarse-grained molecular dynamics parameters for cholesterol and related molecules are available for the Martini force field and have been successfully used in multiple lipid bilayer studies. In this work, we focus on the

Effects of atmospheric SO[sub 2] on Azolla and Anabaena symbiosis

Energy Technology Data Exchange (ETDEWEB)

Hur, J.-S.; Wellburn, A.R. (Division of Biological Sciences, Institute of Environmental and Biological Sciences, Lancaster Univ., Lancaster (United Kingdom))

1993-01-01

The water fern Azolla pinnata R. Br. was fumigated for 1 week with either 25, 50 or 100 nl l[sup -1] SO[sub 2]. The symbiosis of Azolla with Anabaena azollae (spp.) was severely damaged by atmospheric SO[sub 2] even at the lowest concentration studied showing significant reductions in growth, reduction of C[sub 2]H[sub 2], NH[sub 3] assimilation, protein synthesis, and heterocyst development. These disturbances appear to be mainly responsible for the extreme sensitivity of this fern to atmospheric SO[sub 2]. Changes in violaxanthin/antheraxanthin and epoxylutein/lutein ratios also indicate that free radical products are induced by atmospheric SO[sub 2]. These results suggest that the Azolla-Anabeana symbiotic system is a very responsive and reliable lower plant model to study the detailed effects of total sulfur deposition upon the balances between various important plant metabolic processes.

Development of a low-cost oxy-hydrogen bio-fuel cell for generation of electricity using Nostoc as a source of hydrogen

Energy Technology Data Exchange (ETDEWEB)

Sangeeta Dawar; Behera, B.K. [Maharshi Dayanand University, Rohtak (India). Dept. of Biosciences; Prasanna Mohanty [Jawaharlal Nehru University, New Delhi (India). School of Life Sciences

1998-10-10

An oxy-hydrogen bio-fuel cell, based on a carbon-carbon electrode has been fabricated. The electrode pellets were prepared by taking carbon powder mixed with polyvinylalcohol as a binder. The anode was charged with Co-Al spinel mixed oxide at 700{sup o}C, 30% KOH acted as an electrolyte. For the cyanobacterial bioreactor, a potential heterocystous blue green alga of Nostoc spp. has been used for hydrogen production and electrical energy generation. Various nutrient enrichment techniques are employed to increase the hydrogen generation efficiency of the algae. One litre free cell algal reactor attached to the fuel cell, at the anode end for hydrogen gas input, generated about 300 mV of voltage and 100 mA of current. Our present findings on the development of a low cost fuel cell with high efficiency of current output may be helpful in commercializing this technology. (author)

Cellular and functional specificity among ferritin-like proteins in the multicellular cyanobacterium Nostoc punctiforme.

Science.gov (United States)

Ekman, Martin; Sandh, Gustaf; Nenninger, Anja; Oliveira, Paulo; Stensjö, Karin

2014-03-01

Ferritin-like proteins constitute a remarkably heterogeneous protein family, including ferritins, bacterioferritins and Dps proteins. The genome of the filamentous heterocyst-forming cyanobacterium Nostoc punctiforme encodes five ferritin-like proteins. In the present paper, we report a multidimensional characterization of these proteins. Our phylogenetic and bioinformatics analyses suggest both structural and physiological differences among the ferritin-like proteins. The expression of these five genes responded differently to hydrogen peroxide treatment, with a significantly higher rise in transcript level for Npun_F3730 as compared with the other four genes. A specific role for Npun_F3730 in the cells tolerance against hydrogen peroxide was also supported by the inactivation of Npun_F3730, Npun_R5701 and Npun_R6212; among these, only the ΔNpun_F3730 strain showed an increased sensitivity to hydrogen peroxide compared with wild type. Analysis of promoter-GFP reporter fusions of the ferritin-like genes indicated that Npun_F3730 and Npun_R5701 were expressed in all cell types of a diazotrophic culture, while Npun_F6212 was expressed specifically in heterocysts. Our study provides the first comprehensive analysis combining functional differentiation and cellular specificity within this important group of proteins in a multicellular cyanobacterium. © 2013 John Wiley & Sons Ltd and Society for Applied Microbiology.

Di- or polysulphide-bound biomarkers in sulphur-rich geomacromolecules as revealed by selective chemolysis

Science.gov (United States)

Kohnen, Math E. l.; Sinninghe Damsté, Jaap S.; Kock-van Dalen, A. c.; Jan, W. De Leeuw

1991-05-01

Three types of sulphur-rich high-molecular-weight material in the alkylsulphide, the polar, and the asphaltene fractions isolated from the bitumen of an immature bituminous shale from the Vena del Gesso basin (Italy) were desulphurised using Raney Ni and were treated with MeLi/MeI, a chemical degradation method which cleaves selectively and quantitatively di- or polysulphide linkages. The products formed were characterised by gas chromatography-mass spectrometry. Raney Ni desulphurisation revealed that these S-rich macromolecules are in substantial part composed of sulphur-linked biomarkers with linear, branched, isoprenoid, steroid, hopanoid, and carotenoid carbon skeletons. MeLi/Mel treatment provided evidence that a major part of the total amount of macromolecularly bound biomarkers are linked via di- or polysulphide moieties to the macromolecular network. Since the di- or polysulphide linkages are attached at specific positions of the bound biomarkers it is proposed that they are formed by intermolecular incorporation reactions of HS x- into low-molecular-weight functionalised biological lipids during early diagenesis. The different properties (solubility and molecular weight) of the sulphur-rich macromolecules in the alkylsulphide, the resin, and the asphaltene fractions can be explained simply by differences in degree of sulphur cross-linking.

The Evolution of Sterol Biosynthesis in Bacteria: In Situ Fluorescence Localization of Sterols in the Nucleoid Bacterium Gemmata obscuriglobus

Science.gov (United States)

Budin, M.; Jorgenson, T. L.; Pearson, A.

2004-12-01

The biosynthesis of sterols is generally regarded as a eukaryotic process. The first enzymatic step in the production of sterols requires molecular oxygen. Therefore, both the origin of eukaryotes and the evolution of sterol biosynthesis were thought to postdate the rise of oxygen in earth's atmosphere, until Brocks et al. discovered steranes in rocks aged 2.7 Ga (1). Many prokaryotes produce hopanoids, sterol-like compounds that are synthesized from the common precursor squalene without the use of molecular oxygen. However, a few bacterial taxa are also known to produce sterols, suggesting this pathway could precede the rise of oxygen (2, 3). Recently, we discovered the shortest sterol-producing biosynthetic pathway known to date in the bacterium Gemmata obscuriglobus (4). Using genomic searches, we found that Gemmata has the enzymes necessary for synthesis of sterols, and lipid analyses showed that the sterols produced are lanosterol and its isomer parkeol. Gemmata is a member of the Planctomycetes, an unusual group of bacteria, all of the known species of which contain intracellular compartmentalization. Among the Planctomycetes, Gemmata uniquely is the only prokaryote known to contain a double-membrane-bounded nuclear body (5). Since sterols usually are found in eukaryotes, and Gemmata has a eukaryote-like nuclear organelle, we investigated the location of the sterols within Gemmata to postulate whether they play a role in stabilization of the nuclear membrane and control of genomic organization. We used the sterol-specific fluorescent dye Filipin III in conjunction with fluorescent dyes for internal and external cellular membranes in order to determine whether the sterols are located in the nuclear body membrane, external membrane, or both. We found that sterols in Gemmata are concentrated in the internal membrane, implying that they function in maintaining this unusual cellular component. It is notable that Gemmata also produce hopanoids, suggesting that they

Antagonism at combined effects of chemical fertilizers and carbamate insecticides on the rice-field N2-fixing cyanobacterium Cylindrospermum sp. in vitro

OpenAIRE

Padhy Rabindra N.; Nayak Nabakishore; Rath Shakti

2014-01-01

Effects of chemical fertilizers (urea, super phosphate and potash) on toxicities of two carbamate insecticides, carbaryl and carbofuran, individually to the N2-fixing cyanobacterium, Cylindrospermum sp. were studied in vitro at partially lethal levels (below highest permissive concentrations) of each insecticide. The average number of vegetative cells between two polar heterocysts was 16.3 in control cultures, while the mean value of filament length increased in the presence of chemical ferti...

Anaerobic Oxidation of Methane in a French meromictic lake (Lake Pavin): Who is responsible?

Science.gov (United States)

Grossi, V.; Attard, E.; Birgel, D.; Schaeffer, P.; Jézéquel, D.; Lehours, A.

2012-12-01

= -31‰) released following the chemical degradation of ether bonds with HI, argue against an origin from archaea involved in AOM. Intriguingly, the only 13C-depleted (-66‰<δ13C<-53‰) lipid biomarkers detected in the superficial sediments and in the anoxic waters of Lake Pavin are bacterial hopanoids (diploptene, diplopterol, C32 homohopanols and homohopanoic acid). Such 13C-depleted hopanoids are generally thought to be specific of aerobic methanotrophic bacteria but the recent discovery of hopanoids in cultures of strictly anaerobic bacteria allows envisaging AOM in Lake Pavin as a bacterially-driven process. The analysis of lipid biomarkers from the different redox zones of the water column (oxic, transition oxic-anoxic, fully anoxic) is currently being investigated and should help assessing the unconventional anaerobic methane consumers of Lake Pavin.

Cyanobacterial Polyhydroxybutyrate (PHB: Screening, Optimization and Characterization.

Directory of Open Access Journals (Sweden)

Sabbir Ansari

Full Text Available In modern life petroleum-based plastic has become indispensable due to its frequent use as an easily available and a low cost packaging and moulding material. However, its rapidly growing use is causing aquatic and terrestrial pollution. Under these circumstances, research and development for biodegradable plastic (bioplastics is inevitable. Polyhydroxybutyrate (PHB, a type of microbial polyester that accumulates as a carbon/energy storage material in various microorganisms can be a good alternative. In this study, 23 cyanobacterial strains (15 heterocystous and 8 non-heterocystous were screened for PHB production. The highest PHB (6.44% w/w of dry cells was detected in Nostoc muscorum NCCU- 442 and the lowest in Spirulina platensis NCCU-S5 (0.51% w/w of dry cells, whereas no PHB was found in Cylindrospermum sp., Oscillatoria sp. and Plectonema sp. Presence of PHB granules in Nostoc muscorum NCCU- 442 was confirmed microscopically with Sudan black B and Nile red A staining. Pretreatment of biomass with methanol: acetone: water: dimethylformamide [40: 40: 18: 2 (MAD-I] with 2 h magnetic bar stirring followed by 30 h continuous chloroform soxhlet extraction acted as optimal extraction conditions. Optimized physicochemical conditions viz. 7.5 pH, 30°C temperature, 10:14 h light:dark periods with 0.4% glucose (as additional carbon source, 1.0 gl-1 sodium chloride and phosphorus deficiency yielded 26.37% PHB on 7th day instead of 21st day. Using FTIR, 1H NMR and GC-MS, extracted polymer was identified as PHB. Thermal properties (melting temperature, decomposition temperatures etc. of the extracted polymer were determined by TGA and DSC. Further, the polymer showed good tensile strength and young's modulus with a low extension to break ratio comparable to petrochemical plastic. Biodegradability potential tested as weight loss percentage showed efficient degradation (24.58% of PHB within 60 days by mixed microbial culture in comparison to

Cyanobacterial Polyhydroxybutyrate (PHB): Screening, Optimization and Characterization

Science.gov (United States)

Ansari, Sabbir; Fatma, Tasneem

2016-01-01

In modern life petroleum-based plastic has become indispensable due to its frequent use as an easily available and a low cost packaging and moulding material. However, its rapidly growing use is causing aquatic and terrestrial pollution. Under these circumstances, research and development for biodegradable plastic (bioplastics) is inevitable. Polyhydroxybutyrate (PHB), a type of microbial polyester that accumulates as a carbon/energy storage material in various microorganisms can be a good alternative. In this study, 23 cyanobacterial strains (15 heterocystous and 8 non-heterocystous) were screened for PHB production. The highest PHB (6.44% w/w of dry cells) was detected in Nostoc muscorum NCCU- 442 and the lowest in Spirulina platensis NCCU-S5 (0.51% w/w of dry cells), whereas no PHB was found in Cylindrospermum sp., Oscillatoria sp. and Plectonema sp. Presence of PHB granules in Nostoc muscorum NCCU- 442 was confirmed microscopically with Sudan black B and Nile red A staining. Pretreatment of biomass with methanol: acetone: water: dimethylformamide [40: 40: 18: 2 (MAD-I)] with 2 h magnetic bar stirring followed by 30 h continuous chloroform soxhlet extraction acted as optimal extraction conditions. Optimized physicochemical conditions viz. 7.5 pH, 30°C temperature, 10:14 h light:dark periods with 0.4% glucose (as additional carbon source), 1.0 gl-1 sodium chloride and phosphorus deficiency yielded 26.37% PHB on 7th day instead of 21st day. Using FTIR, 1H NMR and GC-MS, extracted polymer was identified as PHB. Thermal properties (melting temperature, decomposition temperatures etc.) of the extracted polymer were determined by TGA and DSC. Further, the polymer showed good tensile strength and young’s modulus with a low extension to break ratio comparable to petrochemical plastic. Biodegradability potential tested as weight loss percentage showed efficient degradation (24.58%) of PHB within 60 days by mixed microbial culture in comparison to petrochemical plastic

Cyanobacterial Polyhydroxybutyrate (PHB): Screening, Optimization and Characterization.

Science.gov (United States)

Ansari, Sabbir; Fatma, Tasneem

2016-01-01

In modern life petroleum-based plastic has become indispensable due to its frequent use as an easily available and a low cost packaging and moulding material. However, its rapidly growing use is causing aquatic and terrestrial pollution. Under these circumstances, research and development for biodegradable plastic (bioplastics) is inevitable. Polyhydroxybutyrate (PHB), a type of microbial polyester that accumulates as a carbon/energy storage material in various microorganisms can be a good alternative. In this study, 23 cyanobacterial strains (15 heterocystous and 8 non-heterocystous) were screened for PHB production. The highest PHB (6.44% w/w of dry cells) was detected in Nostoc muscorum NCCU- 442 and the lowest in Spirulina platensis NCCU-S5 (0.51% w/w of dry cells), whereas no PHB was found in Cylindrospermum sp., Oscillatoria sp. and Plectonema sp. Presence of PHB granules in Nostoc muscorum NCCU- 442 was confirmed microscopically with Sudan black B and Nile red A staining. Pretreatment of biomass with methanol: acetone: water: dimethylformamide [40: 40: 18: 2 (MAD-I)] with 2 h magnetic bar stirring followed by 30 h continuous chloroform soxhlet extraction acted as optimal extraction conditions. Optimized physicochemical conditions viz. 7.5 pH, 30°C temperature, 10:14 h light:dark periods with 0.4% glucose (as additional carbon source), 1.0 gl-1 sodium chloride and phosphorus deficiency yielded 26.37% PHB on 7th day instead of 21st day. Using FTIR, 1H NMR and GC-MS, extracted polymer was identified as PHB. Thermal properties (melting temperature, decomposition temperatures etc.) of the extracted polymer were determined by TGA and DSC. Further, the polymer showed good tensile strength and young's modulus with a low extension to break ratio comparable to petrochemical plastic. Biodegradability potential tested as weight loss percentage showed efficient degradation (24.58%) of PHB within 60 days by mixed microbial culture in comparison to petrochemical plastic.

Comunidad de cianobacterias durante el ciclo de cultivo de arroz: Oriza sativa L. Cyanobacteria during a rice (Oriza sativa L. crop cycle

Directory of Open Access Journals (Sweden)

Cecilia Isabel Sánchez

2007-07-01

entrance of water to the field. Total cyanobacterial counts were similar in both sites three days after flooding (tillering but differed in booting and physiological maturity. Cyanobacteria genera found during rice crop were: Chroococcus, Aphanocapsa and Gloeocapsa (unicellular Oscillatoria, Lyngbya and Arthrospira (non-heterocystous filamentous Anabaena, Nostoc, Cylindrospermum andGloeotrichia (heterocystous filamentous. The heterocystous filamentous cyanobacteria were less than 45% and about 25% in most of the cases. Unicellular cyanobacteria were in a greater proportion in the site with a higher temperature, and non-heterocystous filamentous cyanobacteria were lower and less than 2% during crop cycle. Simpson's diversity indexes were greater in the site with the higher water temperature in each sampling moment. Dominant genera were the unicellular Chroococcus and Gloeocapsa in five of the six sampling moments. In both sampling sites, Chroococcus was always reported during the crop, Gloeocapsa and Nostoc were detected in booting and physiological maturity and Cylindrospermum and Gloeotrichia were only reported in physiological maturity.

N2-fixation by freshly isolated Nostoc from coralloid roots of the cycad Macrozamia riedlei (Fisch. ex Gaud.) Gardn

International Nuclear Information System (INIS)

Lindblad, P.; Atkins, C.A.; Pate, J.S.

1991-01-01

Nitrogenase (EC 1.7.99.2) activity (acetylene reduction) and nitrogen fixation ( 15 N 2 fixation) were measured in cyanobacteria freshly isolated from the coralloid roots of Macrozamia riedlei (Fisch. ex Gaud.) Gardn. The data indicate that cyanobacteria within cycad coralloid roots are differentiated specifically for symbiotic functioning in a microaerobic environment. Specializations include a high heterocyst frequency, enhanced permeability to O 2 , and a direct dependence on the cycad for substrates to support nitrogenase activity

Optimation of Nitrogen and Phosphorus in Azolla Growth as Biofertilizer

Directory of Open Access Journals (Sweden)

Hany Handajani

2013-03-01

Full Text Available Nitrogen is one of the most important minerals for living organisms. Azolla is known as a small water fern which can fix nitrogen through the symbiotic association with the blue green algae Anabaena. Experimental studies were carried out in the glass house, investigating the growth of Azolla using different levels of nitrogen and phosphorus in the media. The experiment used 12 treatments with 3 levels of nitrogen (0, 5, and 10 mg atom/L and 4 levels of phosphorus (0, 10, 20, and 30 mg atom/l in a factorial design with 3 replicates. The results show that the highest biomass for fresh weight (13.28 g, dry weight (1,126 g, and the fastest doubling time (7.71 days were found in combination of 10 mg atom/L N and 30 mg atom/L P. Meanwhile, the highest protein content was found in combination of 5 mg atom/L N and 20 mg atom/L P. After the third day heterocyst cells in Anabaena could only be found in those two combinations, but the highest heterocyst cells was found in the lower N and P combination similar to the highest protein content. Further experiment is suggested to introduce Azolla as bio-fertilizer for acid water system, such as peat land water.

Characterization and in vivo regulon determination of an ECF sigma factor and its cognate anti-sigma factor in Nostoc punctiforme.

Science.gov (United States)

Bell, Nicole; Lee, Jamie J; Summers, Michael L

2017-04-01

Based on primary sequence comparisons and genomic context, Npun_F4153 (SigG)/Npun_F4154 (SapG) of the cyanobacterium Nostoc punctiforme were hypothesized to encode an ECF sigma factor/anti-sigma factor pair. Transcription of sigG increased in heterocysts and akinetes, and after EDTA treatment. Interaction between SigG and the predicted cytoplasmic domain of SapG was observed in vitro. A SigG-GFP translational fusion protein localized to the periphery of vegetative cells in vivo, but lost this association following heat stress. A sigG mutant was unable to survive envelope damage caused by heat or EDTA, but was able to form functional heterocysts. Akinetes in the mutant strain appeared normal, but these cultures were less resistant to lysozyme and cold treatments than those of the wild-type strain. The SigG in vivo regulon was determined before and during akinete differentiation using DNA microarray analysis, and found to include multiple genes with putative association to the cell envelope. Mapped promoters common to both arrays enabled identification of a SigG promoter-binding motif that was supported in vivo by reporter studies, and in vitro by run-off transcription experiments. These findings support SigG/SapG as a sigma/anti-sigma pair involved in repair of envelope damage resulting from exogenous sources or cellular differentiation. © 2017 John Wiley & Sons Ltd.

Benthic cyanobacteria: A source of cylindrospermopsin and microcystin in Australian drinking water reservoirs.

Science.gov (United States)

Gaget, Virginie; Humpage, Andrew R; Huang, Qiong; Monis, Paul; Brookes, Justin D

2017-11-01

Cyanobacteria represent a health hazard worldwide due to their production of a range of highly potent toxins in diverse aquatic environments. While planktonic species have been the subject of many investigations in terms of risk assessment, little is known about benthic forms and their impact on water quality or human and animal health. This study aimed to purify isolates from environmental benthic biofilms sampled from three different drinking water reservoirs and to assess their toxin production by using the following methods: Enzyme-Linked Immunosorbent Assay (ELISA), High-Performance Liquid Chromatography (HPLC), Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) and quantitative PCR (qPCR). Microscopic observation of the isolates allowed the identification of various filamentous cyanobacterial genera: Anabaena (benthic form), Calothrix and Nostoc from the Nostocales and Geitlerinema, Leptolyngbya, Limnothrix, Lyngbya, Oxynema, Phormidium and Pseudanabaena representing non-heterocystous filamentous cyanobacteria. The Phormidium ambiguum strain AWQC-PHO021 was found to produce 739 ng/mg of dry weight (d/w) of cylindrospermopsin and 107 ng/mg (d/w) of deoxy-cylindrospermopsin. The Nostoc linckia strain AWQC-NOS001 produced 400 ng/mg (d/w) of a microcystin analogue. This is the first report of hepatotoxin production by benthic cyanobacteria in temperate Australian drinking water reservoirs. These findings indicate that water quality monitoring programs need to consider benthic cyanobacteria as a potential source of toxins. Copyright © 2017 Elsevier Ltd. All rights reserved.

Geochemical evaluation of a shale stratigraphic profile from Paraiba Valley (Tremembe)

International Nuclear Information System (INIS)

Loureiro, M.R.B.; Cardoso, J.N.

1987-01-01

The sedimentary core ranges 0-35m depth and covers three types of bituminous shales, intercalated by two layers of sterile clay. A systematic geochemical study of samples of most stratigraphic layers was undertaken for the first time in this work, including elemental analysis (C, H), carbonate content, type of organic matter, infrared spectrometry and molecular characterization of organic extracts (hight-resolution) gas chromatography, mass spectrometry). No consistent correlation between lithology and amount/type of organic matter was observed, contrary to literature data, pointing out the paper shale strata as richest in organic matter. Molecular stratigraphy of the core presented similar n-alkane profiles generally maximizing at n-C 27 attesting to a small variation in input along the sedimentary section. Characterization of the branched/cyclic hydrocarbons evidenced a continental input to the sediment, as revealed by the presence, in several layers, of isometric des-A-fernenes, presumed products of diagenesis of arborinone. A microbial input was also evidenced through the general occurrence of hopanoids, trace amounts of steroidal skeletons as well as atomic H/C ratios ca. 2. The sharp variations in biomarker profiles with depth showed great potential as correlation markers in a detailed stratigraphic study of the basin, as a valuable supplement to traditional lithological parameters. (author) [pt

Radiation effects on algae and its application

International Nuclear Information System (INIS)

Dwivedi, Rakesh Kumar

2013-01-01

The effects of radiation on algae have been summarized in this article. Today, algae are being considered to have the great potential to fulfill the demand of food, fodder, fuel and various pharmaceutical products. Red algae are particularly rich in the content of polysaccharides present in their cell wall. For isolation of these polysaccharides, separation of cells cemented together by middle lamella is essential. The gamma rays are known to bring about biochemical changes in the cell wall and cause the breakdown of the middle lamella. These rays ate also known to speed up the starch sugar inter-conversion in the cells which is very useful for the tapping the potential of algae to be used as biofuel as well as in pharmaceutical industries. Cyanobacteria, among algae and other plants are more resistant to the radiation. In some cyanobacteria the radiation treatment is known to enhance the resistance against the antibiotics. Radiation treatment is also known to enhance the diameter of cell and size of the nitrogen fixing heterocyst. (author)

The cyanobacterium Mastigocladus fulfills the nitrogen demand of a terrestrial hot spring microbial mat.

Science.gov (United States)

Estrella Alcamán, María; Fernandez, Camila; Delgado, Antonio; Bergman, Birgitta; Díez, Beatriz

2015-10-01

Cyanobacteria from Subsection V (Stigonematales) are important components of microbial mats in non-acidic terrestrial hot springs. Despite their diazotrophic nature (N2 fixers), their impact on the nitrogen cycle in such extreme ecosystems remains unknown. Here, we surveyed the identity and activity of diazotrophic cyanobacteria in the neutral hot spring of Porcelana (Northern Patagonia, Chile) during 2009 and 2011-2013. We used 16S rRNA and the nifH gene to analyze the distribution and diversity of diazotrophic cyanobacteria. Our results demonstrate the dominance of the heterocystous genus Mastigocladus (Stigonematales) along the entire temperature gradient of the hot spring (69-38 °C). In situ nitrogenase activity (acetylene reduction), nitrogen fixation rates (cellular uptake of (15)N2) and nifH transcription levels in the microbial mats showed that nitrogen fixation and nifH mRNA expression were light-dependent. Nitrogen fixation activities were detected at temperatures ranging from 58 °C to 46 °C, with maximum daily rates of 600 nmol C2H4 cm(-2) per day and 94.1 nmol N cm(-2) per day. These activity patterns strongly suggest a heterocystous cyanobacterial origin and reveal a correlation between nitrogenase activity and nifH gene expression during diurnal cycles in thermal microbial mats. N and C fixation in the mats contributed ~3 g N m(-2) per year and 27 g C m(-2) per year, suggesting that these vital demands are fully met by the diazotrophic and photoautotrophic capacities of the cyanobacteria in the Porcelana hot spring.

Cyanobacterial photosynthesis under sulfidic conditions: insights from the isolate Leptolyngbya sp. strain hensonii

Science.gov (United States)

Hamilton, Trinity L; Klatt, Judith M; de Beer, Dirk; Macalady, Jennifer L

2018-01-01

We report the isolation of a pinnacle-forming cyanobacterium isolated from a microbial mat covering the sediment surface at Little Salt Spring—a flooded sinkhole in Florida with a perennially microoxic and sulfidic water column. The draft genome of the isolate encodes all of the enzymatic machinery necessary for both oxygenic and anoxygenic photosynthesis, as well as genes for methylating hopanoids at the C-2 position. The physiological response of the isolate to H2S is complex: (i) no induction time is necessary for anoxygenic photosynthesis; (ii) rates of anoxygenic photosynthesis are regulated by both H2S and irradiance; (iii) O2 production is inhibited by H2S concentrations as low as 1 μM and the recovery rate of oxygenic photosynthesis is dependent on irradiance; (iv) under the optimal light conditions for oxygenic photosynthesis, rates of anoxygenic photosynthesis are nearly double those of oxygenic photosynthesis. We hypothesize that the specific adaptation mechanisms of the isolate to H2S emerged from a close spatial interaction with sulfate-reducing bacteria. The new isolate, Leptolyngbya sp. strain hensonii, is not closely related to other well-characterized Cyanobacteria that can perform anoxygenic photosynthesis, which further highlights the need to characterize the diversity and biogeography of metabolically versatile Cyanobacteria. The isolate will be an ideal model organism for exploring the adaptation of Cyanobacteria to sulfidic conditions. PMID:29328062

Cyanobacterial photosynthesis under sulfidic conditions: insights from the isolate Leptolyngbya sp. strain hensonii.

Science.gov (United States)

Hamilton, Trinity L; Klatt, Judith M; de Beer, Dirk; Macalady, Jennifer L

2018-02-01

We report the isolation of a pinnacle-forming cyanobacterium isolated from a microbial mat covering the sediment surface at Little Salt Spring-a flooded sinkhole in Florida with a perennially microoxic and sulfidic water column. The draft genome of the isolate encodes all of the enzymatic machinery necessary for both oxygenic and anoxygenic photosynthesis, as well as genes for methylating hopanoids at the C-2 position. The physiological response of the isolate to H 2 S is complex: (i) no induction time is necessary for anoxygenic photosynthesis; (ii) rates of anoxygenic photosynthesis are regulated by both H 2 S and irradiance; (iii) O 2 production is inhibited by H 2 S concentrations as low as 1 μM and the recovery rate of oxygenic photosynthesis is dependent on irradiance; (iv) under the optimal light conditions for oxygenic photosynthesis, rates of anoxygenic photosynthesis are nearly double those of oxygenic photosynthesis. We hypothesize that the specific adaptation mechanisms of the isolate to H 2 S emerged from a close spatial interaction with sulfate-reducing bacteria. The new isolate, Leptolyngbya sp. strain hensonii, is not closely related to other well-characterized Cyanobacteria that can perform anoxygenic photosynthesis, which further highlights the need to characterize the diversity and biogeography of metabolically versatile Cyanobacteria. The isolate will be an ideal model organism for exploring the adaptation of Cyanobacteria to sulfidic conditions.

Variations of Growth and Toxin Yield in Cylindrospermopsis raciborskii under Different Phosphorus Concentrations

Directory of Open Access Journals (Sweden)

Yiming Yang

2016-12-01

Full Text Available The bloom-forming cyanobacteria, Cylindrospermopsis raciborskii, is a producer of the cytotoxic cylindrospermopsin (CYN. In this study, the growth, toxin yield, and expression of CYN biosynthesis genes of C. raciborskii were examined under varying phosphorus (P concentrations. The results show the cell number at 0.00 and 0.01 mg·L−1 P was significantly lower than that at higher P concentrations (≥0.5 mg·L−1. The chlorophyll a content, filament length, heterocyst, and akinete numbers at P ≤ 0.05 mg·L−1 were also significantly reduced. The intracellular and extracellular CYN concentrations and the extracellular proportions increased during the culture period, and larger values were observed at higher P concentrations. Total CYN content reached 45.34–63.83 fg·cell−1 and extracellular CYN proportion reached 11.49%–20.44% at the stationary growth phase. A significantly positive correlation was observed between CYN production and cell growth rate. Three cyr genes were expressed constantly even at P-deficient conditions. The transcription of cyr genes at P-replete conditions or after P supplementation increased from 1.18-fold to 8.33-fold. In conclusion, C. raciborskii may rapidly reorganize metabolic processes as an adaptive response to environmental P fluctuations. CYN production and cyr gene expression were constitutive metabolic processes in toxic C. raciborskii.

Elevated Atmospheric CO2 and Warming Stimulates Growth and Nitrogen Fixation in a Common Forest Floor Cyanobacterium under Axenic Conditions

Directory of Open Access Journals (Sweden)

Zoë Lindo

2017-03-01

Full Text Available The predominant input of available nitrogen (N in boreal forest ecosystems originates from moss-associated cyanobacteria, which fix unavailable atmospheric N2, contribute to the soil N pool, and thereby support forest productivity. Alongside climate warming, increases in atmospheric CO2 concentrations are expected in Canada’s boreal region over the next century, yet little is known about the combined effects of these factors on N fixation by forest floor cyanobacteria. Here we assess changes in N fixation in a common forest floor, moss-associated cyanobacterium, Nostoc punctiforme Hariot, under elevated CO2 conditions over 30 days and warming combined with elevated CO2 over 90 days. We measured rates of growth and changes in the number of specialized N2 fixing heterocyst cells, as well as the overall N fixing activity of the cultures. Elevated CO2 stimulated growth and N fixation overall, but this result was influenced by the growth stage of the cyanobacteria, which in turn was influenced by our temperature treatments. Taken together, climate change factors of warming and elevated CO2 are expected to stimulate N2 fixation by moss-associated cyanobacteria in boreal forest systems.

The Impact of Elevated Temperatures on Continental Carbon Cycling in the Paleogene

Science.gov (United States)

Pancost, R. D.; Handley, L.; Taylor, K. W.; Collinson, M. E.; Weijers, J.; Talbot, H. M.; Hollis, C. J.; Grogan, D. S.; Whiteside, J. H.

2010-12-01

Recent climate and biogeochemical modelling suggests that methane flux from wetlands and soils was greater during past greenhouse climates, due to a combination of higher continental temperatures, an enhanced hydrological cycle, and elevated primary production. Here, we examine continental environments in the Paleogene using a range of biomarker proxies (complemented by palaeobotanical approaches), including air temperatures derived from the distribution of soil bacterial glycerol dialkyl glycerol tetraethers (the MBT/CBT proxy), as well as evidence from wetland and lacustrine settings for enhanced methane cycling. Previously published and new MBT/CBT records parallel sea surface temperature records, suggesting elevated continental temperatures during the Eocene even at mid- to high latitudes (New Zealand, 20-28°C; the Arctic, 17°C; across the Sierra Nevada, 15-25°C; and SE England, 20-30°C). Such temperatures are broadly consistent with paleobotanical records and would have directly led to increased methane production via the metabolic impact of temperature on rates of methanogenesis. To test this, we have determined the distributions and carbon isotopic compositions of archaeal ether lipids and bacterial hopanoids in thermally immature Eocene lignites. In particular, the Cobham lignite, deposited in SE England and spanning the PETM, is characterised by markedly higher concentrations of both methanogen and methanotroph biomarkers compared to modern and Holocene temperate peats. Elevated temperatures, by fostering either stratification and/or decreased oxygen solubility, could have also led to enhanced methane production in Paleogene lakes. Both the Messel Shale (Germany) and Green River Formation, specifically the Parachute Creek oil shale horizons (Utah and Wyoming), are characterised by strongly reducing conditions (including euxinic conditions in the latter), as well as abundant methanogen and methanotroph biomarkers. Such results confirm model predictions

Hopanoids in Bacteria and Cyanobacteria – Their Role in Cellular Biochemistry and Physiology, Analysis and Occurrence

Czech Academy of Sciences Publication Activity Database

Řezanka, Tomáš; Siřišťová, L.; Melzoch, K.; Sigler, Karel

2010-01-01

Roč. 7, č. 4 (2010), s. 300-313 ISSN 1570-193X Institutional research plan: CEZ:AV0Z50200510 Keywords : bacteriohopanol * apci * hplc Subject RIV: EE - Microbiology, Virology Impact factor: 2.284, year: 2010

Product design - Molecules, devices, functional products, and formulated products

DEFF Research Database (Denmark)

Gani, Rafiqul; Ng, Ka M.

2015-01-01

Chemical product design is a multidisciplinary and diverse subject. This article provides an overview of product design while focusing on product conceptualization. Four product types are considered - molecular products, formulated products, devices and functional products. For molecular products......, computer-aided design tools are used to predict the physicochemical properties of single molecules and blends. For formulated products, an integrated experiment-modeling approach is used to generate the formula with the specified product attributes. For devices and functional products, conceptual product...... design is carried out by modeling the product based on thermodynamics, kinetics and transport processes, by performing experiments, and by decision making based on rule-based methods The results are product specifications in terms of the type of ingredients, composition, and the structure, form, shape...

Response of biological soil crust diazotrophs to season, altered summer precipitation and year-round increased temperature in an arid grassland of the Colorado Plateau, USA

Directory of Open Access Journals (Sweden)

Chris M Yeager

2012-10-01

Full Text Available Biological soil crusts (biocrusts, which supply significant amounts of fixed nitrogen into terrestrial ecosystems worldwide (~33 Tg y-1, are likely to respond to changes in temperature and precipitation associated with climate change. Using nifH gene-based surveys, we explored variation in the diazotrophic community of biocrusts of the Colorado Plateau, USA in response to season (autumn vs. spring, as well as field manipulations that increased the frequency of small-volume precipitation events and year-round soil temperature. Abundance of nifH genes in biocrusts ranged from 3x106 – 1x108 g-1 soil, and nifH from heterocystous cyanobacteria closely related to Scytonema hyalinum, Spirirestis rafaelensis, and Nostoc commune comprised > 98% of the total. Although there was no apparent seasonal effect on total nifH gene abundance in the biocrusts, T-RFLP analysis revealed a strong seasonal pattern in nifH composition. Spirirestis nifH abundance was estimated to oscillate 1 to >2 orders of magnitude between autumn (low and spring (high. A year-round increase of soil temperature (2 − 3 °C had little effect on the diazotroph community structure over 2 years. Altered summer precipitation had little impact on diazotroph community structure over the first 1.5 years of the study, when natural background patterns across years and seasons superseded any treatment effects. However, after the second summer of treatments, nifH abundance was 2.6 fold lower in biocrusts receiving altered precipitation. Heterocystous cyanobacteria were apparently more resilient to altered precipitation than other cyanobacteria. The results demonstrate that diazotrophic community composition of biocrusts in this semi-arid grassland undergoes strong seasonal shifts and that the abundance of its dominant members decreased in response to more frequent, small-volume precipitation events.

Response of biological soil crust diazotrophs to season, altered summer precipitation, and year-round increased temperature in an arid grassland of the Colorado Plateau, USA

Science.gov (United States)

Yeager, Chris M.; Kuske, Cheryl R.; Carney, Travis D.; Johnson, Shannon L.; Ticknor, Lawrence O.; Belnap, Jayne

2012-01-01

Biological soil crusts (biocrusts), which supply significant amounts of fixed nitrogen into terrestrial ecosystems worldwide (~33Tg y-1), are likely to respond to changes in temperature and precipitation associated with climate change. Using nifH gene-based surveys, we explored variation in the diazotrophic community of biocrusts of the Colorado Plateau, USA in response to season (autumn vs. spring), as well as field manipulations that increased the frequency of small volume precipitation events and year-round soil temperature. Abundance of nifH genes in biocrusts ranged from 3×106 to 1×8 g-1 soil, and nifH from heterocystous cyanobacteria closely related to Scytonema hyalinum, Spirirestis rafaelensis, and Nostoc commune comprised >98% of the total. Although there was no apparent seasonal effect on total nifH gene abundance in the biocrusts, T-RFLP analysis revealed a strong seasonal pattern in nifH composition. Spirirestis nifH abundance was estimated to oscillate 1 to >2 orders of magnitude between autumn (low) and spring (high). A year-round increase of soil temperature (2–3°C) had little effect on the diazotroph community structure over 2 years. Altered summer precipitation had little impact on diazotroph community structure over the first 1.5years of the study, when natural background patterns across years and seasons superseded any treatment effects. However, after the second summer of treatments, nifH abundance was 2.6-fold lower in biocrusts receiving altered precipitation. Heterocystous cyanobacteria were apparently more resilient to altered precipitation than other cyanobacteria. The results demonstrate that diazotrophic community composition of biocrusts in this semi-arid grassland undergoes strong seasonal shifts and that the abundance of its dominant members decreased in response to more frequent, small volume precipitation events.

The two Dps proteins, NpDps2 and NpDps5, are involved in light-induced oxidative stress tolerance in the N2-fixing cyanobacterium Nostoc punctiforme.

Science.gov (United States)

Moparthi, Vamsi K; Li, Xin; Vavitsas, Konstantinos; Dzhygyr, Ievgen; Sandh, Gustaf; Magnuson, Ann; Stensjö, Karin

2016-11-01

Cyanobacteria are photosynthetic prokaryotes that are considered biotechnologically prominent organisms for production of high-value compounds. Cyanobacteria are subject to high-light intensities, which is a challenge that needs to be addressed in design of efficient bio-engineered photosynthetic organisms. Dps proteins are members of the ferritin superfamily and are omnipresent in prokaryotes. They play a major role in oxidative stress protection and iron homeostasis. The filamentous, heterocyst-forming Nostoc punctiforme, has five Dps proteins. In this study we elucidated the role of these Dps proteins in acclimation to high light intensity, the gene loci organization and the transcriptional regulation of all five dps genes in N. punctiforme was revealed, and dps-deletion mutant strains were used in physiological characterization. Two mutants defective in Dps2 and Dps5 activity displayed a reduced fitness under increased illumination, as well as a differential Photosystem (PS) stoichiometry, with an elevated Photosystem II to Photosystem I ratio in the dps5 deletion strain. This work establishes a Dps-mediated link between light tolerance, H 2 O 2 detoxification, and iron homeostasis, and provides further evidence on the non-redundant role of multiple Dps proteins in this multicellular cyanobacterium. Copyright © 2016 Elsevier B.V. All rights reserved.

The Antitumor Effects of Triterpenoid Saponins from the Anemone flaccida and the Underlying Mechanism

Directory of Open Access Journals (Sweden)

Lin-Tao Han

2013-01-01

Full Text Available Anemone flaccida Fr. Schmidt, a family of ancient hopanoids, have been used as traditional Asian herbs for the treatments of inflammation and convulsant diseases. Previous study on HeLa cells suggested that triterpenoid saponins from Anemone flaccida Fr. Schmidt may have potential antitumor effect due to their apoptotic activities. Here, we confirmed the apoptotic activities of the following five triterpenoid saponins: glycoside St-I4a (1, glycoside St-J (2, anhuienoside E (3, hedera saponin B (4, and flaccidoside II (5 on human BEL-7402 and HepG2 hepatoma cell lines, as well as the model of HeLa cells treated with lipopolysaccharide (LPS. We found that COX-2/PGE2 signaling pathway, which plays key roles in the development of cancer, is involved in the antitumor activities of these saponins. These data provide the evidence that triterpenoid saponins can induce apoptosis via COX-2/PGE2 pathway, implying a preventive role of saponins from Anemone flaccida in tumor.

Cellular and Molecular Biological Approaches to Interpreting Ancient Biomarkers

Science.gov (United States)

Newman, Dianne K.; Neubauer, Cajetan; Ricci, Jessica N.; Wu, Chia-Hung; Pearson, Ann

2016-06-01

Our ability to read the molecular fossil record has advanced significantly in the past decade. Improvements in biomarker sampling and quantification methods, expansion of molecular sequence databases, and the application of genetic and cellular biological tools to problems in biomarker research have enabled much of this progress. By way of example, we review how attempts to understand the biological function of 2-methylhopanoids in modern bacteria have changed our interpretation of what their molecular fossils tell us about the early history of life. They were once thought to be biomarkers of cyanobacteria and hence the evolution of oxygenic photosynthesis, but we now believe that 2-methylhopanoid biosynthetic capacity originated in the Alphaproteobacteria, that 2-methylhopanoids are regulated in response to stress, and that hopanoid 2-methylation enhances membrane rigidity. We present a new interpretation of 2-methylhopanes that bridges the gap between studies of the functions of 2-methylhopanoids and their patterns of occurrence in the rock record.

Induction of the Nitrate Assimilation nirA Operon and Protein-Protein Interactions in the Maturation of Nitrate and Nitrite Reductases in the Cyanobacterium Anabaena sp. Strain PCC 7120.

Science.gov (United States)

Frías, José E; Flores, Enrique

2015-07-01

assimilate nitrate, but regulation of the nitrate assimilation system varies in different cyanobacterial groups. In the N2-fixing, heterocyst-forming cyanobacteria, the nirA operon, which includes the structural genes for the nitrate assimilation system, is expressed in the presence of nitrate or nitrite if ammonium is not available to the cells. Here we studied the genes required for production of an active nitrate reductase, providing information on the nitrate-dependent induction of the operon, and found evidence for possible protein-protein interactions in the maturation of nitrate reductase and nitrite reductase. Copyright © 2015, American Society for Microbiology. All Rights Reserved.

A Putative O-Linked β-N-Acetylglucosamine Transferase Is Essential for Hormogonium Development and Motility in the Filamentous Cyanobacterium Nostoc punctiforme.

Science.gov (United States)

Khayatan, Behzad; Bains, Divleen K; Cheng, Monica H; Cho, Ye Won; Huynh, Jessica; Kim, Rachelle; Omoruyi, Osagie H; Pantoja, Adriana P; Park, Jun Sang; Peng, Julia K; Splitt, Samantha D; Tian, Mason Y; Risser, Douglas D

2017-05-01

Most species of filamentous cyanobacteria are capable of gliding motility, likely via a conserved type IV pilus-like system that may also secrete a motility-associated polysaccharide. In a subset of these organisms, motility is achieved only after the transient differentiation of hormogonia, which are specialized filaments that enter a nongrowth state dedicated to motility. Despite the fundamental importance of hormogonia to the life cycles of many filamentous cyanobacteria, the molecular regulation of hormogonium development is largely undefined. To systematically identify genes essential for hormogonium development and motility in the model heterocyst-forming filamentous cyanobacterium Nostoc punctiforme , a forward genetic screen was employed. The first gene identified using this screen, designated ogtA , encodes a putative O-linked β- N -acetylglucosamine transferase (OGT). The deletion of ogtA abolished motility, while ectopic expression of ogtA induced hormogonium development even under hormogonium-repressing conditions. Transcription of ogtA is rapidly upregulated (1 h) following hormogonium induction, and an OgtA-GFPuv fusion protein localized to the cytoplasm. In developing hormogonia, accumulation of PilA but not HmpD is dependent on ogtA Reverse transcription-quantitative PCR (RT-qPCR) analysis indicated equivalent levels of pilA transcript in the wild-type and Δ ogtA mutant strains, while a reporter construct consisting of the intergenic region in the 5' direction of pilA fused to gfp produced lower levels of fluorescence in the Δ ogtA mutant strain than in the wild type. The production of hormogonium polysaccharide in the Δ ogtA mutant strain is reduced compared to that in the wild type but comparable to that in a pilA deletion strain. Collectively, these results imply that O -GlcNAc protein modification regulates the accumulation of PilA via a posttranscriptional mechanism in developing hormogonia. IMPORTANCE Filamentous cyanobacteria are among

Modelling Product Families for Product Configuration Systems with Product Variant Master

DEFF Research Database (Denmark)

Mortensen, Niels Henrik; Hvam, Lars; Haug, Anders

2010-01-01

This article presents an evaluation of applying a suggested method for modelling product families for product configuration based on theory for modelling mechanical products,systems theory and object-oriented modelling. The modelling technique includes a so-called product variant master and CRC-cards...... the three views. Modelling of characteristics of the product variants in a product family Modelling of constraints between parts in the product family Visualisation of the entire product family on a poster e.g. 1x2 meters The product variant master and CRC-cards are means to bridge the gap between domain...... experts and IT-developers, thus making it possible for the domain experts (e.g. engineers from product development) to express their knowledge in a form that is understandable both for the domain experts and the IT-developers. The product variant master and CRC-cards have currently been tested and further...

Production of Modularised Product Systems

DEFF Research Database (Denmark)

Jacobsen, Peter

2004-01-01

but a solution. Modularisation is one tool used in designing the products. Designing and controlling a production system making customized products in an economical way is not an easy task. In order to fulfil the Lean and Agile manufacturing philosophies the production is often carried out in networks. Here...

Moorea producens gen. nov., sp. nov. and Moorea bouillonii comb. nov., tropical marine cyanobacteria rich in bioactive secondary metabolites.

Science.gov (United States)

Engene, Niclas; Rottacker, Erin C; Kaštovský, Jan; Byrum, Tara; Choi, Hyukjae; Ellisman, Mark H; Komárek, Jiří; Gerwick, William H

2012-05-01

The filamentous cyanobacterial genus Moorea gen. nov., described here under the provisions of the International Code of Botanical Nomenclature, is a cosmopolitan pan-tropical group abundant in the marine benthos. Members of the genus Moorea are photosynthetic (containing phycocyanin, phycoerythrin, allophycocyanin and chlorophyll a), but non-diazotrophic (lack heterocysts and nitrogenase reductase genes). The cells (discoid and 25-80 µm wide) are arranged in long filaments (algae blooms and, due to morphological resemblance to the genus Lyngbya, this group has often been incorrectly cited in the literature. We here describe two species of the genus Moorea: Moorea producens sp. nov. (type species of the genus) with 3L(T) as the nomenclature type, and Moorea bouillonii comb. nov. with PNG5-198(R) as the nomenclature type.

Hydrogen evolution by a thermophilic blue-green alga. Mastigocladus laminosus

Energy Technology Data Exchange (ETDEWEB)

Mirua, Y; Yokoyama, H; Kanaoka, K; Saito, S; Iwasa, K; Okazaki, M; Komemushi, S

1980-01-01

The thermophillic blue-green alga (cyanobacterium), Mastigocladus laminosus isolated from a hot spring, evolved hydrogen gas under nitrogen-starved conditions in light when algal cells were grown in a nitrate-free medium. Cells grown in a nitrate-medium evolved no detectable hydrogen gas in light. The optimal temperature and pH for hydrogen evolution were 44-49 degrees C and 7.0-7.5. High activity of hydrogen evolution, 1.6 ml H/sub 2//mg chl.hr, was induced when algal cells grown in the nitrate medium were actively forming heterocysts in the nitrate-free medium in air. Hydrogen evolution in light was depressed by nitrogen gas and inhibited by salicylaldoxime or DNP. This hydrogen evolution by M. laminosus is attributed to the action of nitrogenase.

Impact of product development efforts on product introduction and product customization abilities

DEFF Research Database (Denmark)

Chaudhuri, Atanu; Dawar, Saloni

2014-01-01

This paper investigates the impact of efforts in new product development-manufacturing integration (NPDMI) on new product introduction (NPI) and product customization (PC) abilities and the moderating effects of product design complexity and importance of new product development order winners...... (NPIOW) on the above relationships. The results from the data on 136 Indian manufacturing plants show that NPDMI, product design complexity and NPIOW all have significant positive impact on NPI and PC abilities. Importance of NPIOW has a positive moderating effect on the relationship between NPDMI and PC...... ability change but product design complexity demonstrate no such effect on the above relationships....

Proteomic analysis of the cyanobacterium of the Azolla symbiosis: identity, adaptation, and NifH modification.

Science.gov (United States)

Ekman, Martin; Tollbäck, Petter; Bergman, Birgitta

2008-01-01

Cyanobacteria are able to form stable nitrogen-fixing symbioses with diverse eukaryotes. To extend our understanding of adaptations imposed by plant hosts, two-dimensional gel electrophoresis and mass spectrometry (MS) were used for comparative protein expression profiling of a cyanobacterium (cyanobiont) dwelling in leaf cavities of the water-fern Azolla filiculoides. Homology-based protein identification using peptide mass fingerprinting [matrix-assisted laser desorption ionization-time of flight (MALDI-TOF-MS)], tandem MS analyses, and sequence homology searches resulted in an identification success rate of 79% of proteins analysed in the unsequenced cyanobiont. Compared with a free-living strain, processes related to energy production, nitrogen and carbon metabolism, and stress-related functions were up-regulated in the cyanobiont while photosynthesis and metabolic turnover rates were down-regulated, stressing a slow heterotrophic mode of growth, as well as high heterocyst frequencies and nitrogen-fixing capacities. The first molecular data set on the nature of the NifH post-translational modification in cyanobacteria was also obtained: peptide mass spectra of the protein demonstrated the presence of a 300-400 Da protein modification localized to a specific 13 amino acid sequence, within the part of the protein that is ADP-ribosylated in other bacteria and close to the active site of nitrogenase. Furthermore, the distribution of the highest scoring database hits for the identified proteins points to the possibility of using proteomic data in taxonomy.

Product and labour market regulations, production prices, wages and productivity

NARCIS (Netherlands)

Cette, G.; Lopez, J.; Mairesse, J.

2015-01-01

This study is an attempt to evaluate the effects of product and labour market regulations on industry productivity through their various impacts on changes in production prices and wages. In a first stage, the estimation of a regression equation on an industry*country panel, with controls for

From Product Models to Product State Models

DEFF Research Database (Denmark)

Larsen, Michael Holm

1999-01-01

A well-known technology designed to handle product data is Product Models. Product Models are in their current form not able to handle all types of product state information. Hence, the concept of a Product State Model (PSM) is proposed. The PSM and in particular how to model a PSM is the Research...

17 CFR 229.1204 - (Item 1204) Oil and gas production, production prices and production costs.

Science.gov (United States)

2010-04-01

... production, production prices and production costs. 229.1204 Section 229.1204 Commodity and Securities... production, production prices and production costs. (a) For each of the last three fiscal years disclose... production cost, not including ad valorem and severance taxes, per unit of production. Instruction 1 to Item...

An Explanatory Study of Lean Practices in Job Shop Production/ Special Job Production/ Discrete Production/ Batch Shop Production Industries

OpenAIRE

Lavlesh Kumar Sharma; Ravindra Mohan Saxena

2014-01-01

In this paper, the study explores the benefits and advantages of Lean Practices or Lean Thinking in Job shop production/ Special job production/ Discrete production/ Batch shop production industries. The Lean Practices have been applied more compatible in Job shop production than in the continuous/ mass production because of several barriers and hurdles in the industrial context that influence the whole processes again and again, this happens due to the lack of knowledge about...

Production monitoring system for understanding product robustness

DEFF Research Database (Denmark)

Boorla, Srinivasa Murthy; Howard, Thomas J.

2016-01-01

study is used to demonstrate how the monitoring system can be used to efficiently guide corrective action to improve product performance. It is claimed that the monitoring system can be used to dramatically cut the time taken to identify, planand execute corrective action related to typical quality......In the current quality paradigm, the performance of a product is kept within specification by ensuring that its parts are within specification. Product performance is then validated after final assembly. However, this does not control how robust the product performance is, i.e. how much...... it will vary between the specification limits. In this paper, a model for predicting product performance is proposed, taking into account design, assembly and process parameters live from production. This empowers production to maintain final product performance, instead of part quality. The PRECI‐IN case...

Depositional Environment of the Sangkarewang Oil Shale, Ombilin Basin, Indonesia

Directory of Open Access Journals (Sweden)

Komang Anggayana

2014-12-01

Full Text Available Five samples from 56 m long drill core of lacustrine Sangkarewang oil shale have been studied by means of petrography and organic geochemistry to investigate the organic matter composition and depositional environments of the shale. The organic matter consists of abundant lamalginite (30%, v/v and very limited amount of vitrinite, suggesting aquatic depositional environments with minor terrestrial influence. Organic geochemical analysis exhibits the dominance of pristane, phytane, and generally n-alkanes compounds. These compounds might originate mostly from aquatic photosynthetic organisms. The oil shale was likely deposited in anoxic lake environments, suggested by the presence of framboidal pyrite (6%, v/v and preserved organic matter with total organic carbon (TOC about 4.9%. The pristane/phytane ratio is relatively high about 3.9 and thought as source sensitive rather than redox sensitive. Hopanoid and aryl isoprenoid compounds are present in minor amounts. The latter compounds are interpreted to be derived from green sulfur bacteria dwelling in anoxic and the presence of H2S in bottom water.

Method for alignment of product and production concepts

DEFF Research Database (Denmark)

Pedersen, Rasmus; Kvist, Morten; Mortensen, Niels Henrik

2005-01-01

The right use of modular product architectures can help companies provide a great variety of customized products at a competitive price level, by reuse of knowledge, components, processes and utilization of economies of scale in many of the activities that are necessary to provide products...... for customers. Modular product architectures often serve as a basis for several products often referred to as product families. One or more product families may constitute a substantial amount of the total product portfolio of a company, and it is, therefore, of the greatest importance that concepts...... and solutions are evaluated thoroughly throughout the design phases because any design fault is likely to propagate to a large part of the business. Developing modular product architectures is therefore also the task of ensuring a fit between the products that can be made on the basis of the architecture...

Product Structure, the Heart of Product Definition

Science.gov (United States)

DeHoog, C., Jr.

1999-01-01

This paper describes the LMMSS Product Definition System (PDS) philosophy and approach were the use of each item parts document or software can be traced to a specific end item (EI) serial/tail number of the product. It explains why a part-oriented approach to data organization and configuration management is required. The definition of part-oriented is that all appropriate product definition data products will be collected. Referenced and managed by their linkage/relationship to parts/items, The paper will touch upon how LMMSS store/controls product definition information under each project's top product designator in a two tiered approach. One tier for each product end item and another tier which contain/controls listings of drawings, documents. Specifications and standards that are required for hardware item definition.

Product-Marketing Innovation, Skills, and Firm Productivity Growth

DEFF Research Database (Denmark)

Junge, Martin; Severgnini, Battista; Sørensen, Anders

2016-01-01

The role of product and marketing innovation for productivity growth is addressed using survey and register data for the Danish economy. It is hypothesized that product and marketing innovation are complementary inputs and that innovation activities are skill-intensive. It is established...... that product and marketing innovation in skill-intensive firms results in significantly faster productivity growth. Moreover, product and marketing innovation have independent roles in productivity growth, which cannot be attributed to organizational changes. Finally, we apply an instrument variable approach...... for firms, innovation choices to study endogeneity. The results strongly support the idea that product–marketing innovation leads to faster productivity growth in skill-intensive firms....

Product-Marketing Innovation, Skills and Firm Productivity Growth

DEFF Research Database (Denmark)

Junge, Martin; Severgnini, Battista; Sørensen, Anders

The role of product and marketing innovation for productivity growth is addressed using survey and register data for the Danish economy. It is argued that marketing and product innovation are complementary inputs and that innovation activities are skill-intensive. It is found that product...... and marketing innovation in skill-intensive firms results in significantly faster productivity growth than in unskilled-intensive firms that introduce this combination of innovation activities. More precisely, an increase in the share of educated workers of one percentage point, increases productivity growth...... by around 0.1 percentage point in firms with product and marketing innovation. In addition, it is found that firms that engage in product innovation but not in marketing innovation or the other way around do not demonstrate a growth effect from their innovation activities. It is also found that product...

An integrated production, inventory and preventive maintenance model for a multi-product production system

International Nuclear Information System (INIS)

Liu, Xuejuan; Wang, Wenbin; Peng, Rui

2015-01-01

This paper considers a production system that can produce multiple products alternately. Products go through the system in a sequence and a complete run of all products forms a production cycle. An integrated production, inventory and preventive maintenance model is constructed, which is characterized by the delay-time concept. Two different situations are studied based on whether the unqualified products and downtime caused by the failures of the system, set-up and preventive maintenance can be ignored or not. Three cases are considered for each situation, depending on the position of the preventive maintenance epochs: the first case, where preventive maintenance is carried out at the end of each production cycle; the second case, where preventive maintenance is carried out at each set-up time of the products; and the third case, where preventive maintenance is carried out at some set-up times only, since it may not always be optimal to carry out preventive maintenance at the end of the production cycle or at each set-up time. The modeling objectives are to find the optimal number of production cycles per year and the optimal position of preventive maintenance that will maximize the expected profit per unit time. Numerical examples, using real data, are presented to illustrate the model. - Highlights: • We propose an integrated economic production quantity and preventive maintenance model. • The situation that multiple products are produced on the same system alternately is studied. • Two situations are studied based on whether the downtime and the product quality can be ignored or not. • We use enumeration method and analytical method to select the optimal preventive maintenance policy, respectively. • We use the delay-time concept to model the preventive maintenance policy

Sustainable Multi-Product Seafood Production Planning Under Uncertainty

International Nuclear Information System (INIS)

Simanjuntak, Ruth; Mawengkang, Herman; Sembiring, Monalisa; Sinaga, Rani; Pakpahan, Endang J

2013-01-01

A multi-product fish production planning produces simultaneously multi fish products from several classes of raw resources. The goal in sustainable production planning is to meet customer demand over a fixed time horizon divided into planning periods by optimizing the tradeoff between economic objectives such as production cost, waste processed cost, and customer satisfaction level. The major decisions are production and inventory levels for each product and the number of workforce in each planning period. In this paper we consider the management of small scale traditional business at North Sumatera Province which performs processing fish into several local seafood products. The inherent uncertainty of data (e.g. demand, fish availability), together with the sequential evolution of data over time leads the sustainable production planning problem to a nonlinear mixed-integer stochastic programming model. We use scenario generation based approach and feasible neighborhood search for solving the model.

STATEMENT OF THE OPTIMIZATION PROBLEM OF CARBON PRODUCTS PRODUCTION

Directory of Open Access Journals (Sweden)

O. A. Zhuchenko

2016-08-01

Full Text Available The paper formulated optimization problem formulation production of carbon products. The analysis of technical and economic parameters that can be used to optimize the production of carbonaceous products had been done by the author. To evaluate the efficiency of the energy-intensive production uses several technical and economic indicators. In particular, the specific cost, productivity, income and profitability of production. Based on a detailed analysis had been formulated optimality criterion that takes into account the technological components of profitability. The components in detail the criteria and the proposed method of calculating non-trivial, one of them - the production cost of each product. When solving the optimization problem of technological modes of production into account constraints on the variables are optimized. Thus, restrictions may be expressed on the number of each product produced. Have been formulated the method of calculating the cost per unit of product. Attention is paid to the quality indices of finished products as an additional constraint in the optimization problem. As a result have been formulated the general problem of optimizing the production of carbon products, which includes the optimality criterion and restrictions.

Framework for product knowledge and product related knowledge which supports product modelling for mass customization

DEFF Research Database (Denmark)

Riis, Jesper; Hansen, Benjamin Loer; Hvam, Lars

2003-01-01

on experience from product modelling projects in several companies. Among them for example companies manufacturing electronic switchboards, spray dryer systems and air conditioning equipment. The framework is divided into three views: the product knowledge view, the life phase system view and the transformation...... and personalization. The framework for product knowledge and product related knowledge is based on the following theories: axiomatic design, technical systems, theory of domains, theory of structuring, theory of properties and the framework for the content of product and product related models. The framework is built......The article presents a framework for product knowledge and product related knowledge which can be used to support the product modelling process which is needed for developing IT systems. These IT systems are important tools for many companies when they aim at achieving mass customization...

PIGS BREEDING FOR THE PRODUCTION OF TRADITIONAL MEAT PRODUCTS

Directory of Open Access Journals (Sweden)

Đuro Senčić

2014-06-01

Full Text Available The fertile Slavonia is known for production of several types of cured meats: kulen, kulen sis, sausage, ham and bacon, and other pork products (“krvavica” - blood sausage, “švargl” - a type of brawn where chopped parts of head are stuffed inside the pig’s stomach, “čvarci” - a variant of pork crisps, fat. These products require “mature pigs” of adequate slaughter quality. Production of pigs intended for traditional meat products may take place in different production systems (open, closed, semi-open, “organic”. Each of these systems provides a specific quality of pigs for slaughter, reflecting on the quality of the final product. Production systems can have a significant impact on growth performance and carcass and meat quality of pigs. This effect arises from the interaction between housing conditions, the amount and composition of food and used pig genotype. The choice of a production system depends on local production conditions, pig genotype, consumer demand (market for a given product quality, and other factors. Due to their quality, the traditional Slavonian meat products can become a recognizable Croatian brand in both domestic and international markets. Production of standard quality products requires standard quality of pigs. Therefore this book is focused on such pigs production.

78 FR 20176 - Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production...

Science.gov (United States)

2013-04-03

..., Refined Coal Production, and Indian Coal Production, and Publication of Inflation Adjustment Factors and... renewable electricity production, refined coal production, and Indian coal production under section 45... resources, and to 2013 sales of refined coal and Indian coal produced in the United States or a possession...

77 FR 21835 - Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production...

Science.gov (United States)

2012-04-11

..., Refined Coal Production, and Indian Coal Production, and Publication of Inflation Adjustment Factors and... electricity production, refined coal production, and Indian coal production under section 45. DATES: The 2012... sales of refined coal and Indian coal produced in the United States or a possession thereof. Inflation...

A model for optimizing the production of pharmaceutical products

Directory of Open Access Journals (Sweden)

Nevena Gospodinova

2017-05-01

Full Text Available The problem associated with the optimal production planning is especially relevant in modern industrial enterprises. The most commonly used optimality criteria in this context are: maximizing the total profit; minimizing the cost per unit of production; maximizing the capacity utilization; minimizing the total production costs. This article aims to explore the possibility for optimizing the production of pharmaceutical products through the construction of a mathematical model that can be viewed in two ways – as a single-product model and a multi-product model. As an optimality criterion it is set the minimization of the cost per unit of production for a given planning period. The author proposes an analytical method for solving the nonlinear optimization problem. An optimal production plan of Tylosin tartrate is found using the single-product model.

"Product on Stopper" in a Lyophilized Drug Product: Cosmetic Defect or a Product Quality Concern?

Science.gov (United States)

Mehta, Shyam B; Roy, Shouvik; Yang, Han-Chang Cathy

2018-06-01

During manufacturing of a lyophilized drug product, operator errors in product handling during loading of product filled vials onto the lyophilizer can lead to a seemingly cosmetic defect which can impact certain critical quality attributes of finished product. In this study, filling of a formulated monoclonal antibody in vials was performed using a peristaltic pump filling unit, and subsequently, the product was lyophilized. After lyophilization, upon visual inspection, around 40% of vials had cosmetic defect with residual product around stopper of the vial and were categorized as "product on stopper" vials, whereas remaining 60% vials with no cosmetic defect were called "acceptable vials." Both groups of vials from 1 single batch were tested for critical quality attributes including protein concentration (ultraviolet absorbance at 280), residual moisture (Karl Fischer), sterility (membrane filtration), and container closure integrity (CCI) (blue dye ingress). Analysis of protein quality attributes such as aggregation, protein concentration, residual moisture showed no significant difference between vials with "product on stopper" and "acceptable vials." However, CCI of the "product on stopper" vials was compromised due to the presence of product around stopper of the vial. The results from this case study demonstrate the following 2 important findings: (1) that a seemingly cosmetic defect may impact product quality, compromising the integrity of the product and (2) that CCI test method can be used as an orthogonal method to sterility testing to evaluate sterility assurance of the product. The corrective action proposed to mitigate this defect is use of a larger sized vial that can potentially minimize this defect that arises because of product handling errors. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Bioethanol production potential from Brazilian biodiesel co-products

Energy Technology Data Exchange (ETDEWEB)

Visser, Evan Michael; Filho, Delly Oliveira; Martins, Marcio Aredes [Departamento de Engenharia Agricola, Universidade Federal de Vicosa, Campus Universitario 36570-000 Vicosa, MG (Brazil); Steward, Brian L. [Department of Agricultural and Biosystems Engineering, Iowa State University, 214D Davidson Hall, Ames, IA 50011 (United States)

2011-01-15

One major problem facing the commercial production of cellulosic ethanol is the challenge of economically harvesting and transporting sufficient amounts of biomass as a feedstock at biorefinery plant scales. Oil extraction for biodiesel production, however, yields large quantities of biomass co-products rich in cellulose, sugar and starch, which in many cases may be sufficient to produce enough ethanol to meet the alcohol demands of the transesterification process. Soybean, castor bean, Jatropha curcas, palm kernel, sunflower and cottonseed were studied to determine ethanol production potential from cellulose found in the oil extraction co-products and also their capacity to meet transesterification alcohol demands. All crops studied were capable of producing enough ethanol for biodiesel production and, in the case of cottonseed, 470% of the transesterification demand could be met with cellulosic ethanol production from oil extraction co-products. Based on Brazilian yields of the crops studied, palm biomass has the highest potential ethanol yield of 108 m{sup 3} km{sup -2} followed by J. curcas with 40 m{sup 3} km{sup -2}. A total of 3.5 hm{sup 3} could be produced from Brazilian soybean oil extraction co-products. (author)

Tobacco Products Production and Operations Reports

Data.gov (United States)

Department of the Treasury — Monthly statistical reports on tobacco products production and operations. Data for Tobacco Statistical Release is derived directly from the Report – Manufacturer of...

Productivity raising approaches in the logistic production system

Directory of Open Access Journals (Sweden)

Miroslav Rakyta

2001-01-01

Full Text Available This paper deals with the productivity of the logistic production system. The aim is to define the intermediate state of the production machines and equipment (OOE, identification of the material flows, idle time and breakdown forecasting, with the following purchase of the required spare parts. The goal of the system is the satisfaction of the customer´s needs and the minimalisation of not fulfilling the required terms for delivery with simultaneous increasing of the logistic production system productivity.

A product feature-based user-centric product search model

OpenAIRE

Ben Jabeur, Lamjed; Soulier, Laure; Tamine, Lynda; Mousset, Paul

2016-01-01

During the online shopping process, users would search for interesting products and quickly access those that fit with their needs among a long tail of similar or closely related products. Our contribution addresses head queries that are frequently submitted on e-commerce Web sites. Head queries usually target featured products with several variations, accessories, and complementary products. We present in this paper a product feature-based user-centric model for product search involving in a...

Improved Eco-Friendly Recombinant Anabaena sp. Strain PCC7120 with Enhanced Nitrogen Biofertilizer Potential▿

Science.gov (United States)

Chaurasia, Akhilesh Kumar; Apte, Shree Kumar

2011-01-01

Photosynthetic, nitrogen-fixing Anabaena strains are native to tropical paddy fields and contribute to the carbon and nitrogen economy of such soils. Genetic engineering was employed to improve the nitrogen biofertilizer potential of Anabaena sp. strain PCC7120. Constitutive enhanced expression of an additional integrated copy of the hetR gene from a light-inducible promoter elevated HetR protein expression and enhanced functional heterocyst frequency in the recombinant strain. The recombinant strain displayed consistently higher nitrogenase activity than the wild-type strain and appeared to be in homeostasis with compatible modulation of photosynthesis and respiration. The enhanced combined nitrogen availability from the recombinant strain positively catered to the nitrogen demand of rice seedlings in short-term hydroponic experiments and supported better growth. The engineered strain is stable, eco-friendly, and useful for environmental application as nitrogen biofertilizer in paddy fields. PMID:21057013

Improved eco-friendly recombinant Anabaena sp. strain PCC7120 with enhanced nitrogen biofertilizer potential.

Science.gov (United States)

Chaurasia, Akhilesh Kumar; Apte, Shree Kumar

2011-01-01

Photosynthetic, nitrogen-fixing Anabaena strains are native to tropical paddy fields and contribute to the carbon and nitrogen economy of such soils. Genetic engineering was employed to improve the nitrogen biofertilizer potential of Anabaena sp. strain PCC7120. Constitutive enhanced expression of an additional integrated copy of the hetR gene from a light-inducible promoter elevated HetR protein expression and enhanced functional heterocyst frequency in the recombinant strain. The recombinant strain displayed consistently higher nitrogenase activity than the wild-type strain and appeared to be in homeostasis with compatible modulation of photosynthesis and respiration. The enhanced combined nitrogen availability from the recombinant strain positively catered to the nitrogen demand of rice seedlings in short-term hydroponic experiments and supported better growth. The engineered strain is stable, eco-friendly, and useful for environmental application as nitrogen biofertilizer in paddy fields.

75 FR 18015 - Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production...

Science.gov (United States)

2010-04-08

..., Refined Coal Production, and Indian Coal Production, and Publication of Inflation Adjustment Factors and... coal production, and Indian coal production under section 45. FOR FURTHER INFORMATION CONTACT: Philip... Coal, and Indian Coal:'', Line 26, the language ``is 2.15 cents per kilowatt hour on the'' is corrected...

PDT (Product Data Technology), Production and Society

DEFF Research Database (Denmark)

Vesterager, Johan

1997-01-01

Information and communication technology (ICT) constitute a genuine technical revolution by enabling a dynamic and flexible support or automation of knowledge and information work. Bearing in mind that products are frozen knowledge, ICT as known will change the way we produce products dramatically....... The use of ICT in engineering of products constitutes product data technology (PDT).This paper presents a a basic platform for an understanding the ongoing revolution with focus on the PDT-area taking outset in the fundamental elements of knowledge and information work: creation, transformation...

Productivity

DEFF Research Database (Denmark)

Spring, Martin; Johnes, Geraint; Hald, Kim Sundtoft

Productivity is increasingly critical for developed economies. It has always been important: as Paul Krugman puts it, “Productivity isn’t everything, but in the long run it is almost everything. A country’s ability to improve its standard of living over time depends almost entirely on its ability...... to raise its output per worker”(Krugman, 1994). Analyses of productivity have, by and large, been the preserve of economists. Operations Management (OM) is rooted in a similar concern for the efficient use of scarce resources; Management Accounting (MA) is concerned with the institutionalised measurement...... and management of productivity. Yet the three perspectives are rarely connected. This paper is a sketch of a literature review seeking to identify, contrast and reconcile these three perspectives. In so doing, it aims to strengthen the connections between policy and managerial analyses of productivity....

Utilization of Biodiesel By-Products for Biogas Production

Science.gov (United States)

Kolesárová, Nina; Hutňan, Miroslav; Bodík, Igor; Špalková, Viera

2011-01-01

This contribution reviews the possibility of using the by-products from biodiesel production as substrates for anaerobic digestion and production of biogas. The process of biodiesel production is predominantly carried out by catalyzed transesterification. Besides desired methylesters, this reaction provides also few other products, including crude glycerol, oil-pressed cakes, and washing water. Crude glycerol or g-phase is heavier separate liquid phase, composed mainly by glycerol. A couple of studies have demonstrated the possibility of biogas production, using g-phase as a single substrate, and it has also shown a great potential as a cosubstrate by anaerobic treatment of different types of organic waste or energy crops. Oil cakes or oil meals are solid residues obtained after oil extraction from the seeds. Another possible by-product is the washing water from raw biodiesel purification, which is an oily and soapy liquid. All of these materials have been suggested as feasible substrates for anaerobic degradation, although some issues and inhibitory factors have to be considered. PMID:21403868

Products and environment. Report on integrated product policy

International Nuclear Information System (INIS)

2001-01-01

The National Commission for Sustainable Development established on 16 November 1999 a subgroup which had as one of its tasks to formulate a national strategy or a strategic view on how Finland should promote integrated product policy in accordance with the requirements of sustainable development. The aim of integrated product policy is to improve the environmental friendliness of products and product systems by taking into account the environmental effects during their entire lifecycles. Its leading principles are lifecycle thinking, market-basedness, integration of environmental aspects into economic activity, and that all actors within the product chain (consumers, trade, companies) decrease the environmental consequences of their activities according to the principle of shared responsibility and to their preconditions. Political decision-making and administration should provide firms and clients with the required preconditions and i.a. remove obstacles to knowledge and promote research. In product policy, emphasis is on especially those instruments that encourage actors to develop their activities. At national level, economic instruments should be directed to domestic demand and use of products. It is often most appropriate to develop economic instruments for production and legislation and other regulation within international co-operation. (orig.)

Making Online Products More Tangible: The Effect of Product Presentation Formats on Product Evaluations.

Science.gov (United States)

Verhagen, Tibert; Vonkeman, Charlotte; van Dolen, Willemijn

2016-07-01

Although several studies have looked at the effects of online product presentations on consumer decision making, no study thus far has considered a potential key factor in online product evaluations: tangibility. The present study aims at filling this gap by developing and testing a model that relates different online product presentation formats to the three-dimensional concept of product tangibility. We test how the three tangibility dimensions influence perceived diagnosticity and, eventually, online purchase intentions. A between-subjects lab experiment (n = 366) was used to test the hypothesized effects of three common online product presentation formats (pictures vs. 360 spin rotation vs. virtual mirror). The results showed that out of these formats, virtual mirrors were superior in providing a sense of product tangibility, followed by the 360-spin rotation format and static pictures. Furthermore, in terms of predictive validity, two of the three tangibility dimensions significantly increased perceived diagnosticity, which, in turn, positively and strongly affected purchase intentions. Overall, our results add to previous works studying the relationships between online product presentation formats and consumer decision making. Also, they hold value for online practitioners by highlighting the potential benefits of applying technologically advanced product presentation formats such as the virtual mirror.

Advances in product family and product platform design methods & applications

CERN Document Server

Jiao, Jianxin; Siddique, Zahed; Hölttä-Otto, Katja

2014-01-01

Advances in Product Family and Product Platform Design: Methods & Applications highlights recent advances that have been made to support product family and product platform design and successful applications in industry. This book provides not only motivation for product family and product platform design—the “why” and “when” of platforming—but also methods and tools to support the design and development of families of products based on shared platforms—the “what”, “how”, and “where” of platforming. It begins with an overview of recent product family design research to introduce readers to the breadth of the topic and progresses to more detailed topics and design theory to help designers, engineers, and project managers plan, architect, and implement platform-based product development strategies in their companies. This book also: Presents state-of-the-art methods and tools for product family and product platform design Adopts an integrated, systems view on product family and pro...

CalA, a Cyanobacterial AbrB Protein, Interacts with the Upstream Region of hypC and Acts as a Repressor of Its Transcription in the Cyanobacterium Nostoc sp. Strain PCC 7120▿ †

Science.gov (United States)

Agervald, Åsa; Zhang, Xiaohui; Stensjö, Karin; Devine, Ellenor; Lindblad, Peter

2010-01-01

The filamentous, heterocystous, nitrogen-fixing cyanobacterium Nostoc sp. strain PCC 7120 may contain, depending on growth conditions, up to two hydrogenases directly involved in hydrogen metabolism. HypC is one out of at least seven auxiliary gene products required for synthesis of a functional hydrogenase, specifically involved in the maturation of the large subunit. In this study we present a protein, CalA (Alr0946 in the genome), belonging to the transcription regulator family AbrB, which in protein-DNA assays was found to interact with the upstream region of hypC. Transcriptional investigations showed that calA is cotranscribed with the downstream gene alr0947, which encodes a putative protease from the abortive infection superfamily, Abi. CalA was shown to interact specifically not only with the upstream region of hypC but also with its own upstream region, acting as a repressor on hypC. The bidirectional hydrogenase activity was significantly downregulated when CalA was overexpressed, demonstrating a correlation with the transcription factor, either direct or indirect. In silico studies showed that homologues to both CalA and Alr0947 are highly conserved proteins within cyanobacteria with very similar physical organizations of the corresponding structural genes. Possible functions of the cotranscribed downstream protein Alr0947 are presented. In addition, we present a three-dimensional (3D) model of the DNA binding domain of CalA and putative DNA binding mechanisms are discussed. PMID:20023111

Managing complexity of product mix and production flow in configure-to-order production systems

DEFF Research Database (Denmark)

Myrodia, Anna; Bonev, Martin; Hvam, Lars

2014-01-01

In designing configure-to-order production systems for a growing product variety, companies are challenged with an increased complexity for obtaining high productivity levels and cost-effectiveness. In academia several optimization methods and conceptual frameworks for substituting components, or...

Production of GMP certified herbal products in Malaysian Nuclear Agency

International Nuclear Information System (INIS)

Daryl Jesus Arapoc; Bohari Yaacob; Zainah Adam

2015-01-01

This paper will discuss on up scaling production of herbal product. A pilot scale production plant were developed in Block 37 and equipped with automated and semi-automated production machines which have the capacity to produce 100 thousand pieces of tablet per hour. In order to ensure the quality of the products, raw material inspections, IPQC and FPQC will be done on each batch. Besides that, certification of GMP will be done concurrently. One of the products that will be launch soon is the Mas Cotek tablet. This product is the result of numerous years of researches that had been done in BTP. This includes formulation and production of the product itself. It is hope that more herbal products can be produce in near future. (author)

Extending product modeling methods for integrated product development

DEFF Research Database (Denmark)

Bonev, Martin; Wörösch, Michael; Hauksdóttir, Dagný

2013-01-01

Despite great efforts within the modeling domain, the majority of methods often address the uncommon design situation of an original product development. However, studies illustrate that development tasks are predominantly related to redesigning, improving, and extending already existing products...... and PVM methods, in a presented Product Requirement Development model some of the individual drawbacks of each method could be overcome. Based on the UML standard, the model enables the representation of complex hierarchical relationships in a generic product model. At the same time it uses matrix....... Updated design requirements have then to be made explicit and mapped against the existing product architecture. In this paper, existing methods are adapted and extended through linking updated requirements to suitable product models. By combining several established modeling techniques, such as the DSM...

Productivity growth patterns in US dairy products manufacturing plants

NARCIS (Netherlands)

Geylani, P.C.; Stefanou, S.E.

2011-01-01

We analyse the productivity growth patterns in the US dairy products industry using the Census Bureau's plant-level data set. We decompose Total Factor Productivity (TFP) growth into the scale and technical change components and analyse variability of plants' productivity by constructing transition

Micro Products - Product Development and Design

DEFF Research Database (Denmark)

Hansen, Hans Nørgaard

2003-01-01

Innovation within the field of micro and nano technology is to a great extent characterized by cross-disciplinary skills. The traditional disciplines like e.g. physics, biology, medicine and engineering are united in a common development process that can only take place in the presence of multi......-disciplinary competences. One example is sensors for chemical analysis of fluids, where chemistry, biology and flow mechanics all influence the design of the product and thereby the industrial fabrication of the product [1]. On the technological side the development has moved very fast, primarily driven by the need...... of the electronics industry to create still smaller chips with still larger capacity. Therefore the manufacturing technologies connected with micro/nano products in silicon are relatively highly developed compared to the technologies used for manufacturing micro products in metals, polymers and ceramics. For all...

Production management (1976)

International Nuclear Information System (INIS)

Lee, Sun Ryong

1976-03-01

This book introduces production management theory, which gives descriptions of production and system, systems approach, development of production management, Taylor system, Ford system, types of production system, measuring ingredients model of production management, decision of production management, selection of production facilities, arrangement of facilities design of work method and task, work measure system, demanding fore casting, production quality system and credibility system.

Product Customization

DEFF Research Database (Denmark)

Hvam, Lars; Mortensen, Niels Henrik; Riis, Jesper

For the majority of industrial companies, customizing products and services is among the most critical means to deliver true customer value and achieve superior competitive advantage. The challenge is not to customize products and services in itself – but to do it in a profitable way...... from more than 40 product configuration projects in companies providing customer tailored products and services........ The implementation of a product configuration system is among the most powerful ways of achieving this in practice, offering a reduction of the lead time for products and quotations, faster and more qualified responses to customer inquiries, fewer transfers of responsibility and fewer specification mistakes...

The Deployment of Product-Related Environmental Legislation into Product Requirements

Directory of Open Access Journals (Sweden)

Daniela C. A. Pigosso

2016-04-01

Full Text Available Environmental legislation is increasingly changing its focus from manufacturing-oriented to product-oriented instruments. Compliance with product-related environmental legislation is achieved by the incorporation of environmental requirements into the early phases of the product development process (PDP. Nevertheless, the deployment of product-related environmental legislation into product requirements is still a challenge. This study followed an inductive approach to propose a guideline to support the identification, analysis and deployment of product requirements based on product-related environmental legislation. The guideline is composed of nine steps, clustered into three groups according to their main objective: (A identification of environmental product-related legislation; (B identification of legislative topics to be considered for the deployment of requirements; and (C creation and validation of product requirements. The product requirements deployed are to be considered during the PDP. The guideline was evaluated in an expert consultation in a large manufacturing company, suggesting that it can be used to support the systematization and deployment of product-related environmental requirements.

Utilization of Biodiesel By-Products for Biogas Production

Directory of Open Access Journals (Sweden)

Nina Kolesárová

2011-01-01

Full Text Available This contribution reviews the possibility of using the by-products from biodiesel production as substrates for anaerobic digestion and production of biogas. The process of biodiesel production is predominantly carried out by catalyzed transesterification. Besides desired methylesters, this reaction provides also few other products, including crude glycerol, oil-pressed cakes, and washing water. Crude glycerol or g-phase is heavier separate liquid phase, composed mainly by glycerol. A couple of studies have demonstrated the possibility of biogas production, using g-phase as a single substrate, and it has also shown a great potential as a cosubstrate by anaerobic treatment of different types of organic waste or energy crops. Oil cakes or oil meals are solid residues obtained after oil extraction from the seeds. Another possible by-product is the washing water from raw biodiesel purification, which is an oily and soapy liquid. All of these materials have been suggested as feasible substrates for anaerobic degradation, although some issues and inhibitory factors have to be considered.

Product numerical range in a space with tensor product structure

OpenAIRE

Puchała, Zbigniew; Gawron, Piotr; Miszczak, Jarosław Adam; Skowronek, Łukasz; Choi, Man-Duen; Życzkowski, Karol

2010-01-01

We study operators acting on a tensor product Hilbert space and investigate their product numerical range, product numerical radius and separable numerical range. Concrete bounds for the product numerical range for Hermitian operators are derived. Product numerical range of a non-Hermitian operator forms a subset of the standard numerical range containing the barycenter of the spectrum. While the latter set is convex, the product range needs not to be convex nor simply connected. The product ...

Framework for developing product strategy for Configure-To-Order products

DEFF Research Database (Denmark)

Myrodia, Anna; Hvam, Lars

2014-01-01

Companies producing customized products tend to increase the variety of their product portfolio, in order to fulfill the demand of their customers and align with the competitors. Nevertheless the profitability of the product families may vary greatly. The purpose of this paper is to analyze...... profitability of Configure-To-Order (CTO) products. The framework consists of a 4-step model: Analysis of product assortment, Profitability analysis on configured products, Market and Competitors analysis, Scenarios for future product assortment. The suggested framework is tested on a company. The results...... in terms of product delimitation and experiences gained from the case study are further discussed....

Product samples stimulate choice of unfamiliar healthful food products.

Science.gov (United States)

Schickenberg, B; van Assema, P; Brug, J; de Vries, N K

2011-08-01

The purpose of this study was to assess whether the availability of a product sample of an unfamiliar low-fat or fruit and vegetable products stimulates choice for this product among food neophobic young adults. The study had a 2 (experimental vs. control group) by 4 (low-fat bread spread, low-fat cheese, fruit juice, fruit and vegetable juice) between subjects design with a pre-and post-experiment questionnaire. The study was conducted in restaurant rooms of several educational institutions in the Netherlands among a convenience sample of 197 food neophobic young adults aged 17-25 years. A small bite or sip-sized sample of the target product was provided as an intervention. The effect measure was choice of either an unfamiliar healthful food product or a traditional food product. Offering a sample of an unfamiliar healthful food product resulted in 51% of the participants in the experimental group choosing this product vs. 36.4% in the control group. Providing food product samples seems to be a promising strategy in healthy diet promotion programs for food neophobic young adults to increase first-time trial of unfamiliar low-fat and fruit and vegetable products. Copyright © 2011 Elsevier Ltd. All rights reserved.

KLE Translog production function and total factor productivity

Czech Academy of Sciences Publication Activity Database

Klacek, J.; Vošvrda, Miloslav; Schlosser, Š.

2007-01-01

Roč. 87, č. 4 (2007), s. 261-274 ISSN 0322-788X Institutional research plan: CEZ:AV0Z10750506 Keywords : total factor productivity * translog production function * aggregate production function * least squares method * ridge regression Subject RIV: AH - Economics

Clean production and design of products - Complex system and environmental politics of products

International Nuclear Information System (INIS)

Sanchez, M.

1999-01-01

The orientation of the environmental problem in sustainable terms, especially in the industrialized economies, a new profile in the last years has found. In these economies, the search of a clean production franked by a coherent politics of products and the contribution of the design of products, it have given to the environmental speech a new dimension. With the present text it is sought to respond to the necessity of exploring in Colombia this topic that has a decisive paper inside the instruments of protection of the environment cooperating to improve the quality of life in other latitudes. At the moment the theoretical foundations around the development of products play a important role in the different lines of applied investigation carried out by these countries, especially in the mark of a politics of sustainable development. In spite of the importance of this factor in the industrialized countries where the capacity of integration of a coordinated administration is of great meaning, in Colombia, particularly, the relationship between development and design of products with industry, investigation and political of development and, for our case with a clean production, it is characterized by the scarce insert and attention of this discipline

RPC Production at General Tecnica: a mass scale production

International Nuclear Information System (INIS)

Della Volpe, D.; Morganti, S.

2006-01-01

The construction of LHC has deeply changed the RPC production. The enormous amount of detector needed and the strong requirements on gas volume quality had a deep impact on the production chain and on the QC and QA at the production site. This basically has brought the RPC from an almost hand-crafted detector to a medium scale mass product. The most critical aspects of the production chain have been modified and/or improved introducing new and more rigorous QC and QA procedures to guarantee the detector quality and improve the management of storage and the procurement on materials. Here it will be presented the work carried on in the last four year at the production site to improve and check the quality and the results achieved. Something like 10000 RPC were produced between 2002 and 2005. Also a preliminary and rough analysis on the efficiencies of the various phases in the chain production based on ATLAS production will be presented

Flour production from shrimp by-products and sensory evaluation of flour-based products

Directory of Open Access Journals (Sweden)

Thiago Mendes Fernandes

2013-08-01

Full Text Available The objective of this work was to evaluate the production of flour using by-products (cephalothorax obtained from the shrimp (Litopenaeus vannamei industry, and to perform a sensory analysis of shrimp flour-based products. Physicochemical and microbiological analyses on fresh cephalothorax and on manufactured flour were performed, as well as the determination of cholesterol content of this flour, and the sensorial evaluation of soup and pastry made with this flour. By the microbiological analyses, no pathogenic microorganism was detected in the samples. Physicochemical analyses of flour showed high levels of protein (50.05% and minerals (20.97%. Shrimp cephalothorax flour showed high levels of cholesterol. The sensory evaluation indicated a good acceptance of the products, with satisfactory acceptability index (81% for soup, and 83% for pastry, which indicates that shrimp cephalothorax in the form of flour has a potential for developing new products.

Swine production.

Science.gov (United States)

Plain, Ronald L; Lawrence, John D

2003-07-01

The US swine industry is large and growing. The quantity of pork desired by consumers of US pork is growing at the rate of 1.5%/y. New production systems and new technology have enabled production per sow to grow at a rate of 4% annually in recent years. Consequently, the number of sows in the United States is declining. Because productivity growth is outpacing demand growth, the deflated price of hogs and pork is declining. Hog production and prices continue to exhibit strong seasonal and cyclic patterns. Pork production is usually lowest in the summer and highest in the fall. Production and prices tend to follow 4-year patterns. The US swine industry continues to evolve toward fewer and larger producers who rely on contracts for both hog production and marketing. In 2000, over half of the hogs marketed were from approximately 156 firms marketing more than 50,000 head annually. These producers finished 60% of their production in contract facilities. Over 90% of their marketings were under contract or were owned by a packer. These producers expressed a high level of satisfaction with hog production. Both they and their contract growers were satisfied with production contracts. These large producers were satisfied with their marketing contracts and planned to continue them in the future. The hog industry has changed a great deal in the last decade. There is little reason to believe this rapid rate of change will not continue. This swine industry is highly competitive and profit driven. Profit margins are too small to allow producers the luxury of ignoring new technology and innovative production systems. Consequently, hog production will continue its rapid evolution from traditional agriculture to typical industry.

Product Configuration Systems - Implications for Product Innovation and Development

DEFF Research Database (Denmark)

Edwards, Kasper; Pedersen, Jørgen Lindgaard

2004-01-01

configurations. However, costs are but one parameter on which firms compete and firms must continually innovate new and develop existing products. This paper presents original empirical insights on implementation and use of product configuration systems in a number of Danish industrial firms. The paper discusses...... the organisational changes associated with PCS and how this affects product innovation and development. The paper begins by introducing product configuration systems, which are then placed in context to the firm as a process technology which coordinate different processes: product development, order acquisition......Product Configuration Systems (PCS) is a step in the direction of mass customization in the sense that PCS allows a firm to significantly lower the unit cost of configuration. Thus PCS is a valuable technology for lowering operating costs while retaining a high number of possible product...

Treatment of coaly substances. [production of soluble products

Energy Technology Data Exchange (ETDEWEB)

Janner, J; Gonre, O

1928-05-01

A process is described for the production of soluble products from coaly substances. The process consists of heating coal or the like under pressure, and if desired with the addition of gases or vapors which do not react to a substantial extent with the coaly matter under the conditions of working. The product may be treated with a solvent at an elevated temperature and under pressure, with or without the addition of said gases or vapors. The products obtained by the above process may be subjected to a further treatment, in particular a cracking process and/or a destructive hydrogenation. The products may also be separated by the aid of suitable solvents into resins, waxes, and other substances.

Productivity Sharing Programs: Can They Contribute to Productivity Improvement?

Science.gov (United States)

General Accounting Office, Washington, DC.

Productivity sharing plans were studied to determine how they operate, what benefits result, and whether long-term increases in productivity can be realized through the program. Thirty-six firms were interviewed that had productivity sharing plans. Nine firms that had either rejected adoption of a productivity sharing plan or were still…

STRATEGIES FOR INCREASING PRODUCTIVITY IN PRODUCTION SYSTEMS

Directory of Open Access Journals (Sweden)

Diego Pacheco

2014-05-01

Full Text Available The main objective of this article is to point a set of practical strategies that can be adopted to increase the capacity of constraints resources on production systems, when the constraint is inside the factory and not is in the market. To serve this purpose will be presented strategies based on best practices of the Theory of Constraints, Lean Manufacturing and Total Productive Maintenance. This article also presents the mains tools for the deployment of these methodologies. The survey results have provided an objective set of practical strategy that can be used to increase the capacity and productivity of production systems according to the needs of each manufacturing system.

Product Service Systems

DEFF Research Database (Denmark)

Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems......Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems...

An Intelligent Method of Product Scheme Design Based on Product Gene

Directory of Open Access Journals (Sweden)

Qing Song Ai

2013-01-01

Full Text Available Nowadays, in order to have some featured products, many customers tend to buy customized products instead of buying common ones in supermarket. The manufacturing enterprises, with the purpose of improving their competitiveness, are focusing on providing customized products with high quality and low cost as well. At present, how to produce customized products rapidly and cheaply has been the key challenge to manufacturing enterprises. In this paper, an intelligent modeling approach applied to supporting the modeling of customized products is proposed, which may improve the efficiency during the product design process. Specifically, the product gene (PG method, which is an analogy of biological evolution in engineering area, is employed to model products in a new way. Based on product gene, we focus on the intelligent modeling method to generate product schemes rapidly and automatically. The process of our research includes three steps: (1 develop a product gene model for customized products; (2 find the obtainment and storage method for product gene; and (3 propose a specific genetic algorithm used for calculating the solution of customized product and generating new product schemes. Finally, a case study is applied to test the usefulness of our study.

Protein-carbohydrate supplements in the production of meat products

Directory of Open Access Journals (Sweden)

I. N. Tolpigina

2013-01-01

Full Text Available Rationality of the use of protein-carbohydrate additive in the technology of meat products was justified. The capability of the fiber to stabilizate properties of meat systems was investigated. There was established permissible limits of the use of additives in prescription solutions in the production of sausage products of a various price level according to the criterion of biological values. The trial production of sausage products was held. By the methods of mathematical statistics were optimized compositions of protein-polysaccharide additives.

Tobacco Products

Science.gov (United States)

... Exposure is High in Multiunit Housing Smokeless Products Electronic Cigarettes Youth Tobacco Prevention Tobacco Products Tobacco Ingredient ... Tweet Share Compartir Find Fact Sheets on Products (Cigars, Bidis and Betel Quid with Tobacco (Gutka) and ...

Designing Product Families

DEFF Research Database (Denmark)

Pedersen, Per Erik Elgård; Miller, Thomas Dedenroth

1998-01-01

Manufacturing companies that operate with products aimed at different market segments and applications are experiencing an increasing demand from customers who expect products to be tailored to their exact needs rather than accepting general products based on average customer needs. This trend ha......: Variety, Design Principles, and Product Maturity.......Manufacturing companies that operate with products aimed at different market segments and applications are experiencing an increasing demand from customers who expect products to be tailored to their exact needs rather than accepting general products based on average customer needs. This trend has...... led to a new business paradigm, "mass customization", where companies strive to provide highly customized products while still maintaining the efficiency of the classical mass production enterprise. One of the key factors in mass customization has been efficient use of product platforms...

Product Family Assessment

DEFF Research Database (Denmark)

Kvist, Morten

their focus from single products to entire product families and try to incorporate the development of product variety into a future product family. The key is to create fit between the product design and production setup. The challenge of understanding this fit and modelling dispositional relations between...... and on the ideas of lean production, plus experiences from the industrial collaboration. The idea of waste from the lean philosophy is brought into a product variety context, and discussed in relation to product development. Verification of the model has been carried out in an industrial setting at Danfoss......This thesis reports the results of a PhD project from the Technical University of Denmark. The research has been carried out in a collaborative project with the Danish company Danfoss Automatic Controls. In the global market companies are struggling to meet customers’ expectation of products...

Product (RED)

DEFF Research Database (Denmark)

Ponte, Stefano

2011-01-01

) and the consumers who buy iconic brand products to help ‘distant others’. While in many other forms of causumerism, labels or certification systems ‘prove’ that a product is just, in RED, aid celebrities provide the proof. From the consumer point of view both labels and celebrities provide a similar simplification...... of complex social, economic, and environmental processes. At the same time, we argue that there are important distinctions as well—labels and certifications are ultimately about improving the conditions of production, whereas RED is about accepting existing production and trade systems and donating......(PRODUCT)RED™ (hereafter RED) is a cobranding initiative launched in 2006 by the aid celebrity Bono to raise money from product sales to support The Global Fund to Fight AIDS, Tuberculosis and Malaria. In this paper we argue that RED is shifting the boundaries of ‘causumerism’ (shopping...

N:P ratios, light limitation, and cyanobacterial dominance in a subtropical lake impacted by non-point source nutrient pollution

International Nuclear Information System (INIS)

Havens, K.E.; James, R.T.; East, T.L.; Smith, V.H.

2003-01-01

Low ratios of N:P and low underwater irradiance control dominance of cyanobacteria in a subtropical lake. - A long-term (28-year) data set was used to investigate historical changes in concentrations of phosphorus (P), nitrogen (N), N:P ratios, and Secchi disk transparency in a shallow subtropical lake (Lake Okeechobee, Florida, USA). The aim was to evaluate changes in the risk of N 2 -fixing cyanobacterial blooms, which have infrequently occurred in the lake's pelagic zone. Predictions regarding bloom risk were based on previously published N:P ratio models. Temporal trends in the biomass of cyanobacteria were evaluated using phytoplankton data collected in 1974, 1989-1992, and 1997-2000. Concentrations of pelagic total P increased from near 50 μg l -1 in the mid-1970s to over 100 μg l -1 in the late 1990s. Coincidentally, the total N:P (mass) ratio decreased from 30:1 to below 15:1, and soluble N:P ratio decreased from 15:1 to near 6:1, in the lake water. Published empirical models predict that current conditions favor cyanobacteria. The observations confirm this prediction: cyanobacteria presently account for 50-80% of total phytoplankton biovolume. The historical decrease in TN:TP ratio in the lake can be attributed to a decreased TN:TP ratio in the inflow water and to a decline in the lake's assimilation of P, relative to N. Coincident with these declines in total and soluble N:P ratios, Secchi disk transparency declined from 0.6 m to near 0.3 m, possibly due to increased mineral turbidity in the lake water. Empirical models predict that under the turbid, low irradiance conditions that prevail in this lake, non-heterocystous cyanobacteria should dominate the phytoplankton. Our observations confirmed this prediction: non-N 2 -fixing taxa (primarily Oscillatoria and Lyngbya spp.) typically dominated the cyanobacteria community during the last decade. The only exception was a year with very low water levels, when heterocystous N 2 -fixing Anabaena became

N:P ratios, light limitation, and cyanobacterial dominance in a subtropical lake impacted by non-point source nutrient pollution.

Science.gov (United States)

Havens, Karl E; James, R Thomas; East, Therese L; Smith, Val H

2003-01-01

A long-term (28-year) data set was used to investigate historical changes in concentrations of phosphorus (P), nitrogen (N), N:P ratios, and Secchi disk transparency in a shallow subtropical lake (Lake Okeechobee, Florida, USA). The aim was to evaluate changes in the risk of N2-fixing cyanobacterial blooms, which have infrequently occurred in the lake's pelagic zone. Predictions regarding bloom risk were based on previously published N:P ratio models. Temporal trends in the biomass of cyanobacteria were evaluated using phytoplankton data collected in 1974, 1989-1992, and 1997-2000. Concentrations of pelagic total P increased from near 50 microg l-1 in the mid-1970s to over 100 microg l-1 in the late 1990s. Coincidentally, the total N:P (mass) ratio decreased from 30:1 to below 15:1, and soluble N:P ratio decreased from 15:1 to near 6:1, in the lake water. Published empirical models predict that current conditions favor cyanobacteria. The observations confirm this prediction: cyanobacteria presently account for 50-80% of total phytoplankton biovolume. The historical decrease in TN:TP ratio in the lake can be attributed to a decreased TN:TP ratio in the inflow water and to a decline in the lake's assimilation of P, relative to N. Coincident with these declines in total and soluble N:P ratios, Secchi disk transparency declined from 0.6 m to near 0.3 m, possibly due to increased mineral turbidity in the lake water. Empirical models predict that under the turbid, low irradiance conditions that prevail in this lake, non-heterocystous cyanobacteria should dominate the phytoplankton. Our observations confirmed this prediction: non-N2-fixing taxa (primarily Oscillatoria and Lyngbya spp.) typically dominated the cyanobacteria community during the last decade. The only exception was a year with very low water levels, when heterocystous N2-fixing Anabaena became dominant. In the near-shore regions of this shallow lake, low N:P ratios potentially favor blooms of N2-fixing

Production management (2000)

International Nuclear Information System (INIS)

Jung, Chung Yeong

2000-08-01

This book includes basic concept of production management, production system, strategy and mission of production, decision of production management, operation of decision making, life cycle of items and development, value of productions, design for reliability of productions, equipment layout and manufacturing process, quantitative forecast, schedule plan, inventory system, concept, input and output of MRP, Montekalo simulation, quality management, and automation system.

PRODUCTION OF CARBON PRODUCTS USING A COAL EXTRACTION PROCESS

Energy Technology Data Exchange (ETDEWEB)

Dady Dadyburjor; Philip R. Biedler; Chong Chen; L. Mitchell Clendenin; Manoj Katakdaunde; Elliot B. Kennel; Nathan D. King; Liviu Magean; Peter G. Stansberry; Alfred H. Stiller; John W. Zondlo

2004-08-31

This Department of Energy National Energy Technology Laboratory sponsored project developed carbon products, using mildly hydrogenated solvents to extract the organic portion of coal to create synthetic pitches, cokes, carbon foam and carbon fibers. The focus of this effort was on development of lower cost solvents, milder hydrogenation conditions and improved yield in order to enable practical production of these products. This technology is needed because of the long-term decline in production of domestic feedstocks such as petroleum pitch and coal tar pitch. Currently, carbon products represents a market of roughly 5 million tons domestically, and 19 million tons worldwide. Carbon products are mainly derived from feedstocks such as petroleum pitch and coal tar pitch. The domestic supply of petroleum pitch is declining because of the rising price of liquid fuels, which has caused US refineries to maximize liquid fuel production. As a consequence, the long term trend has a decline in production of petroleum pitch over the past 20 years. The production of coal tar pitch, as in the case of petroleum pitch, has likewise declined significantly over the past two decades. Coal tar pitch is a byproduct of metallurgical grade coke (metcoke) production. In this industry, modern metcoke facilities are recycling coal tar as fuel in order to enhance energy efficiency and minimize environmental emissions. Metcoke production itself is dependent upon the production requirements for domestic steel. Hence, several metcoke ovens have been decommissioned over the past two decades and have not been replaced. As a consequence sources of coal tar are being taken off line and are not being replaced. The long-term trend is a reduction in coal tar pitch production. Thus import of feedstocks, mainly from Eastern Europe and China, is on the rise despite the relatively large transportation cost. To reverse this trend, a new process for producing carbon products is needed. The process must be

Productivity improvement with green approach to palm oil factory productivity

Science.gov (United States)

Matondang, N.

2018-02-01

The palm oil factory (POF) processes fresh fruit bunches into crude palm oil (CPO) and palm kernel oil (PKO) by products in the form of liquid and solid waste. One of the solid wastes produced in POF Tanjung Kasau is empty fruit bunches of palm oil (FBPO) which have been burned completely on incinerator tubes so that potentially produces pollutants that pollute the environment. If FBPO waste is managed properly, it will improve the productivity of the company. Therefore, it is necessary to conduct a study to find out how far the increased productivity of the company can reduce their impact on the environment, if FBPO is used as raw material of liquid smoke. The productivity improvement approach is done by Green Productivity concept, by looking at three aspects: environmental, social and economical. Green Productivity aims to protect the environment simultaneously by increasing the productivity of the company. One way is to turn FBPO waste into liquid smoke product is by pyrolysis process. The results showed that turning FBPO solid waste into liquid smoke will increase productivity by 18.18%. Implementation of Green Productivity can improve productivity through the improvement of FBPO waste treatment process which has been done by perfect combustion by pyrolysis process so that waste can be minimized to create environment industry POF clean and friendly environment.

The use of sanitation products in milk and cheese production

Directory of Open Access Journals (Sweden)

Samir Kalit

2001-06-01

Full Text Available Considering hygienic conditions in cheese production the aim of thispaper was to investigate the influence of using some sanitation* products in milk and cheese production on family farms. This investigation was a part of the project “Improving the quality of Tounj cheese produced on family farms”. By use of the sanitation products, during milk production, significant (P<0.01 decrease of geometrical mean of total bacterial count from 3.54 x 105 to 8 x 103 in mL of milk, as well as significant (P<0.01 decrease of geometric mean of somatic cell count from 3.1 x 105 to 2.4 x 105 in mL of milk was observed. The ratio of hygienically unacceptable cheeses, according to the Regulations of microbial standards for foods (NN 46/94., significantly (P<0.01 decreased as well. Because of the new requests and standards, the sanitation products are more in use in both milk and cheese production on family farms. Investigated sanitation products were suitable for use in milk and Tounj cheese production.

Emulsified Water Products

Directory of Open Access Journals (Sweden)

Elif Tuğçe AKSUN

2016-12-01

Full Text Available Seafood is very important depending on having high protein rate and easily digestibility by human, for supply to an important part of animal protein needed. Determining the quality of emulsion-type products, emulsion stability, viscosity and gel strength properties are very important. In the production of products specified in this property emulsion; the main protein ratio and properties of raw material used while you; emulsion pH, temperature, ionic violence, mixing speed, type of fat and additives that are used as well. Previous studies show that particularly of products resulting from water emulsified chicken and goat meat emulsified product obtained from a high capacity of emulsified and compared to cattle and sheep meat is close to specifications, preparation of emulsified type products may be appropriate for the use of fish meat. Another quality parameter in the emulsified meat products, viscosity depends on the amount of meat used in direct proportion with the texture. Fish meat animals in connective tissue connective tissue in meat other butchers to rate ratio is quite low. In this respect, the fish meat produced using emulsified products viscosity according to products prepared using other meat products is quite low. Fish meat produced using emulsified fish sausage products based on surimi, sausage and fish pate fish varieties classed emulsion type products. In this review the different types of seafood using emulsified meat product.

Designer-made meat and dairy products: Consumer-led product development

DEFF Research Database (Denmark)

Grunert, Klaus G.; Valli, Carlotta

2001-01-01

targeting these segments were derived and tested with consumers from these segments. Results show considerable potential for the development of food products which are differentiated in a consumer-based way. The paper closes with a step-model for consumer-led product development adapted to the current state...... of branding and differentiation in the product category.......Consumers differ in the kind of qualities they expect from food products, and they also differ in the way they infer quality from the product information available. Nevertheless, much product innovation in the food sector is still not geared towards specific consumer segments. This is especially...

Designer made meat and dairy products: Consumer-led product development

DEFF Research Database (Denmark)

Grunert, Klaus G.; Valli, Carlotta

targeting these segments were derived and tested with consumers from these segments. Results show considerable potential for the development of food products which are differentiated in a consumer-based way. The paper closes with a step-model for consumer-led product development adapted to the current state...... of branding and differentiation in the product category.......Consumers differ in the kind of qualities they expect from food products, and they also differ in the way they infer quality from the product information available. Nevertheless, much product innovation in the food sector is still not geared towards specific consumer segments. This is especially...

Green product development : What does the country product space imply?

NARCIS (Netherlands)

Fraccascia, Luca; Giannoccaro, Ilaria; Albino, Vito

This paper contributes to green product development by identifying the green products with the highest potential for growth in a country. To address our aim, we use the concept of product proximity and product space and, borrowing from the results of recent studies on complexity economics, we

Proactive Modeling of Market, Product and Production Architectures

DEFF Research Database (Denmark)

Mortensen, Niels Henrik; Hansen, Christian Lindschou; Hvam, Lars

2011-01-01

This paper presents an operational model that allows description of market, products and production architectures. The main feature of this model is the ability to describe both structural and functional aspect of architectures. The structural aspect is an answer to the question: What constitutes...... the architecture, e.g. standard designs, design units and interfaces? The functional aspect is an answer to the question: What is the behaviour or the architecture, what is it able to do, i.e. which products at which performance levels can be derived from the architecture? Among the most important benefits...... of this model is the explicit ability to describe what the architecture is prepared for, and what it is not prepared for - concerning development of future derivative products. The model has been applied in a large scale global product development project. Among the most important benefits is contribution to...

Developing and promoting OKP production system: a JIT production planning approach

Science.gov (United States)

Samavati, Mehran

2011-10-01

The role of production in competitive system of market on one hand and the changing conditions of market on the other hand has caused the need for more developed planning in such environments. The general purpose of the present research is to realize One-of- a- Kind- Product model (OKP) that is developed in two stages. In OKP model presented in 1994 only one sample of each product is produced and only one production method is considered for each product. In order to make OKP model more real and to use it in promoting more production methods, the following developments were made in this research: 1-First Development: Considering various methods for producing each product. 2-Second Development: Producing more than one sample of each product, while considering various production methods for each product. These models promoted OKP model of 1994. They can be used in more diversified production methods in order to promote them. In present model, while describing the main OKP model new models are provided as well. The significance of OKP has been described in Introduction

Estimating product-to-product variations in metal forming using force measurements

Science.gov (United States)

Havinga, Jos; van den Boogaard, Ton

2017-10-01

The limits of production accuracy of metal forming processes can be stretched by the development of control systems for compensation of product-to-product variations. Such systems require the use of measurements from each semi-finished product. These measurements must be used to estimate the final quality of each product. We propose to predict part of the product-to-product variations in multi-stage forming processes based on force measurements from previous process stages. The reasoning is that final product properties as well as process forces are expected to be correlated since they are both affected by material and process variation. In this study, an approach to construct a moving window process model based on historical data from the process is presented. These regression models can be built and updated in real-time during production. The approach is tested with data from a demonstrator process with cutting, deep drawing and bending stages. It is shown that part of the product-to-product variations in the process can be predicted with the developed process model.

Biocidal Products and Borderline Products

OpenAIRE

Yılmaz, Abdullah

2015-01-01

Biocidal product is defined as preparations sold in ready form to use that contains one or more active substances and has control effect, movement restriction or destruction against harmful organisms which has harmful effect on products that people use or produce or animals or environment. These substances which are composed mostly chemicals and ease our lifes are used in increasingly every areas of our life on the other hand they carry variety of risks and threaten our lives. In terms of env...

Product quality of parenteral vancomycin products in the United States.

Science.gov (United States)

Nambiar, S; Madurawe, R D; Zuk, S M; Khan, S R; Ellison, C D; Faustino, P J; Mans, D J; Trehy, M L; Hadwiger, M E; Boyne, M T; Biswas, K; Cox, E M

2012-06-01

In response to concerns raised about the quality of parenteral vancomycin products, the U.S. Food and Drug Administration (FDA) is investigating the product quality of all FDA-approved parenteral vancomycin products available in the United States. Product quality was evaluated independently at two FDA Office of Testing and Research (FDA-OTR) sites. In the next phase of the investigation, being done in collaboration with the National Institute of Allergy and Infectious Diseases, the in vivo activity of these products will be evaluated in an appropriate animal model. This paper summarizes results of the FDA investigation completed thus far. One site used a validated ultrahigh-pressure liquid chromatography method (OTR-UPLC), and the second site used the high-performance liquid chromatography (HPLC) method for related substances provided in the British Pharmacopeia (BP) monograph for vancomycin intravenous infusion. Similar results were obtained by the two FDA-OTR laboratories using two different analytical methods. The products tested had 90 to 95% vancomycin B (active component of vancomycin) by the BP-HPLC method and 89 to 94% vancomycin by OTR-UPLC methods. Total impurities were 5 to 10% by BP-HPLC and 6 to 11% by OTR-UPLC methods. No single impurity was >2.0%, and the CDP-1 level was ≤ 2.0% across all products. Some variability in impurity profiles of the various products was observed. No adverse product quality issues were identified with the six U.S. vancomycin parenteral products. The quality parameters of all parenteral vancomycin products tested surpassed the United States Pharmacopeia acceptance criteria. Additional testing will characterize in vivo performance characteristics of these products.

SaferProducts API

Data.gov (United States)

US Consumer Product Safety Commission — On March 11, 2011, the U.S. Consumer Product Safety Commission launched SaferProducts.gov. This site hosts the agency's new Publicly Available Consumer Product...

Innovation in Product Development

DEFF Research Database (Denmark)

McAloone, Tim C.; Restrepo-Giraldo, John Dairo

2005-01-01

The course on Innovation in Product Development attempts to identify and understand the nature of innovation and product development and their important factors. The course takes both a theoretical and a practical approach and employs a mix of lectures, project work and group discussion. Format...... insight. Course content The following aspects of innovation in product development are considered: - Humans and products - Needs and products - Product life - Teams creating products - Products creating business - Product development models - Organising product development - Product development tools...... - The future of product development....

Lot-sizing for a single-stage single-product production system with rework of perishable production defectives

NARCIS (Netherlands)

Teunter, R.; Flapper, S.D.P.

2003-01-01

We consider a single-stage single-product production system. Produced units may be non-defective, reworkable defective, or non-reworkable defective. The system switches between production and rework. After producing a fixed number (N) of units, all reworkable defective units are reworked. Reworkable

Product Stigmaticity : Understanding, Measuring and Managing Product-Related Stigma

NARCIS (Netherlands)

Vaes, K.

2014-01-01

Stigma-free Product Design. Many of the products intended to relieve us from discomforting or unsafe situations and many medical and assistive devices are experienced as unpleasant and uncomfortable. On top of their discomfort, product users may also experience social unease from the people around

Optimizing the order processing of customized products using product configuration

DEFF Research Database (Denmark)

Hvam, Lars; Bonev, Martin; Denkena, B.

2011-01-01

. Product configuration based on integrated modular product structure and product family architecture has been recognized as an effective means for implementing mass customization. In order to evaluate the effects of product configuration on order processing, a study has been conducted by the Department...... and its benefits for the order processing have been evaluated....

Fickle product mix: Exporters adapting their product vectors across markets

OpenAIRE

Fontagné, Lionel; Secchi, Angelo; Tomasi, Chiara

2014-01-01

This paper analyzes how multi-product firms adjust their exported product-mix across desti- nations. Using cross sections of Italian and French data, we show that firms do not follow a rigid ordering in their product mix exported in different markets but rather they adapt their choices to better match with country characteristics. By using metrics based on export shares and on sequences of product names we provide new insights on the extent a firm's products portfolio changes across destinati...

[Service productivity in hospital nursing--conceptual framework of a productivity analysis].

Science.gov (United States)

Thomas, D; Borchert, M; Brockhaus, N; Jäschke, L; Schmitz, G; Wasem, J

2015-01-01

Decreasing staff numbers compounded by an increasing number of cases is regarded as main challenge in German hospital nursing. These input reductions accompanied by output extensions imply that hospital nursing services have had to achieve a continuous productivity growth in the recent years. Appropriately targeted productivity enhancements require approved and effective methods for productivity acquisition and measurement. However, there is a lack of suitable productivity measurement instruments for hospital nursing services. This deficit is addressed in the present study by the development of an integrated productivity model for hospital nursing services. Conceptually, qualitative as well as quantitative aspects of nursing services productivity are equally taken into consideration. Based on systematic literature reviews different conceptual frameworks of service productivity and the current state of research in hospital nursing services productivity were analysed. On this basis nursing sensitive inputs, processes and outputs were identified and integrated into a productivity model. As an adequate framework for a hospital nursing services productivity model the conceptual approach by Grönroos/Ojasalo was identified. The basic structure of this model was adapted stepwise to our study purpose by integrating theoretical and empirical findings from the research fields of service productivity, nursing productivity as well as national and international nursing research. Special challenges existed concerning the identification of relevant influencing factors as well as the representation of nursing sensitive outputs. The final result is an integrated productivity model, which can be used as an adequate framework for further research in hospital nursing productivity. Research on hospital nursing services productivity is rare, especially in Germany. The conceptual framework developed in this study builds on established knowledge in service productivity research. The

Applying environmental product design to biomedical products research.

Science.gov (United States)

Messelbeck, J; Sutherland, L

2000-12-01

The principal themes for the Biomedical Research and the Environment Conference Committee on Environmental Economics in Biomedical Research include the following: healthcare delivery companies and biomedical research organizations, both nonprofit and for-profit, need to improve their environmental performance; suppliers of healthcare products will be called upon to support this need; and improving the environmental profile of healthcare products begins in research and development (R&D). The committee report begins with requirements from regulatory authorities (e.g., U.S. Environmental Protection Agency [EPA], the U.S. Food and Drug Administration), and the healthcare delivery sector). The 1998 American Hospital Association and EPA Memorandum of Understanding to reduce solid waste and mercury from healthcare facilities is emblematic of these requirements. The dominant message from the requirements discussion is to ensure that R&D organizations do not ignore customer, environmental, and regulatory requirements in the early stages of product development. Several representatives from healthcare products manufacturers presented their companies' approaches to meeting these requirements. They reported on efforts to ensure that their R&D processes are sensitive to the environmental consequences from manufacturing, distributing, using, and disposing of healthcare products. These reports describe representatives' awareness of requirements and the unique approaches their R&D organizations have taken to meet these requirements. All representatives reported that their R&D organizations have embraced environmental product design because it avoids the potential of returning products to R&D to improve the environmental profile. Additionally, several reports detailed cost savings, sustainability benefits, and improvements in environmental manufacturing or redesign, and increased customer satisfaction. Many companies in healthcare delivery are working to improve environmental

Preparing for Automated Derivation of Products in a Software Product Line

National Research Council Canada - National Science Library

McGregor, John D

2005-01-01

... to bring a product to market, or through other production improvements. Business goals such as these make automated product derivation an appealing strategy to a software product line organization...

Radioactivity distribution in phosphate products, by-products, effluents, and wastes

International Nuclear Information System (INIS)

Guimond, R.J.; Windham, S.T.

1975-08-01

Phosphate rock throughout the world contains uranium in concentrations ranging from a few ppM to a few hundred ppM. In the United States, phosphate rock normally contains between 100 to 150 ppM uranium. Mining and processing of these ores redistributes much of the uranium daughters among the various products, by-products, and wastes. These materials are then widely dispersed throughout the environment. This redistribution may lead to increased exposure of the public to these naturally-occurring radionuclides. In determining the magnitude of the population exposure caused by this redistribution and in developing environmental standards and controls to prevent contamination of the biosphere from these naturally-occurring radionuclides it is necessary to determine the concentrations and total quantities of these radionuclides in the products, by-products, effluents and wastes of phosphate mining and manufacturing. Samples of phosphate ores, products, by-products, effluents, and wastes were obtained and analyzed for their radioactivity content. Quantities of radioactivity entering the environment through various products, by-products, effluents, and wastes were estimated

The Impacts of Country-of-origin, Product Involvement, and Product Familiarity on Product Evaluation

OpenAIRE

Nugroho, Sahid Susilo; Rostiani, Rokhima; Gitosudarmo, Indriyo

2014-01-01

One of the most interesting phenomena in global business is the existence of a product’scountry-of-origin (COO). COO as an informational cue has been proven to affect consumer’spurchasing decisions in terms of their perception towards the product’s attributes as well astheir overall evaluation of the product. The objective of this study is to investigate the impacts ofcountry-of-origin on product evaluation in the Indonesian market by considering consumers’product familiarity and consumers’ p...

Comparison of Authorization/Registration/Notification Processes among Biocidal Products, Cosmetics, Plant Protection Products and Human Medicinal Products

OpenAIRE

Söyleriz, Yüksel

2015-01-01

In this study, comparison of the authorization/registration/notification processes of biocidal products, cosmetics, plant protection products and medicinal products are made and in this respect, the situation in EU is assessed.

Productivity analysis of sunflower production in Turkey

International Nuclear Information System (INIS)

Semerci, A.

2012-01-01

In Turkey, which ranks the tenth country worldwide in the sunflower (Helianthus annuus L.) production, 55% of the production is carried out in Thrace Region. Therefore, agricultural enterprises in Thrace Region, situated in the European part of Turkey have specialized in producing sunflower, and have become the centre of vegetable oil industry in the region in terms of produced raw material. This research was conducted in 182 agricultural enterprises in 3 provinces of Thrace Region in Turkey and its objective was to determine input/output relations in sunflower production. The study indicates that the determination coefficient (r/sup 2/) derived from Cobb-Douglas production function was significant at 0.01 level and the elasticity coefficients of the variables (except chemical fertilizer) were found beta i positive in derived equation. It was determined that the variable of herbicide cost had the highest value of the marginal effectiveness coefficients and none of the variables was used at economically optimal level in the study area. When the Marginal Technical Substitution and the Price Rates were taken into consideration, it was noted that only the seed cost/hoeing cost was closest to economically optimum level (1.10). According to stepwise analysis the Land Renting Value was determined as the most important variable in sunflower production. (author)

Productive and Re-Productive Thinking in Solving Insight Problems

Science.gov (United States)

Cunningham, J. Barton; MacGregor, James N.

2014-01-01

Many innovations in organizations result when people discover insightful solutions to problems. Insightful problem-solving was considered by Gestalt psychologists to be associated with productive, as opposed to re-productive, thinking. Productive thinking is characterized by shifts in perspective which allow the problem solver to consider new,…

BRAND - PRODUCT INTERDEPENDENCE

Directory of Open Access Journals (Sweden)

Tudor NISTORESCU

2014-06-01

Full Text Available In this paper we conceptually discussed the brands’ role in the society, the dimensions of branding and the relationship between the brand and the products. We adhere to the main ideas expressed in the literature, that the brand is more than a product. However the product is needed to render the brand tangible. The product is the magic box that delivers the brand experience. Without the product, the brand meaning would have difficulties in attracting customers. More studies are needed to investigate the brand-product relationship.

Defining Product Intake Fraction to Quantify and Compare Exposure to Consumer Products.

Science.gov (United States)

Jolliet, Olivier; Ernstoff, Alexi S; Csiszar, Susan A; Fantke, Peter

2015-08-04

There is a growing consciousness that exposure studies need to better cover near-field exposure associated with products use. To consistently and quantitatively compare human exposure to chemicals in consumer products, we introduce the concept of product intake fraction, as the fraction of a chemical within a product that is eventually taken in by the human population. This metric enables consistent comparison of exposures during consumer product use for different product-chemical combinations, exposure duration, exposure routes and pathways and for other life cycle stages. We present example applications of the product intake fraction concept, for two chemicals in two personal care products and two chemicals encapsulated in two articles, showing how intakes of these chemicals can primarily occur during product use. We demonstrate the utility of the product intake fraction and its application modalities within life cycle assessment and risk assessment contexts. The product intake fraction helps to provide a clear interface between the life cycle inventory and impact assessment phases, to identify best suited sentinel products and to calculate overall exposure to chemicals in consumer products, or back-calculate maximum allowable concentrations of substances inside products.

EPD--environmental product declarations for wood products : an application of life cycle information about forest products

Science.gov (United States)

Richard Bergman; Adam Taylor

2011-01-01

Transparent and credible environmental labeling of products is vital for a sustainable future. Ecolabeling shows information on the environmental performance of products, processes, and services. This article focuses on one type of ecolabeling referred to as environmental product declarations (EPDs) that provide environmental impact information based on life cycle...

An Optimization Model for Product Placement on Product Listing Pages

Directory of Open Access Journals (Sweden)

Yan-Kwang Chen

2014-01-01

Full Text Available The design of product listing pages is a key component of Website design because it has significant influence on the sales volume on a Website. This study focuses on product placement in designing product listing pages. Product placement concerns how venders of online stores place their products over the product listing pages for maximization of profit. This problem is very similar to the offline shelf management problem. Since product information sources on a Web page are typically communicated through the text and image, visual stimuli such as color, shape, size, and spatial arrangement often have an effect on the visual attention of online shoppers and, in turn, influence their eventual purchase decisions. In view of the above, this study synthesizes the visual attention literature and theory of shelf-space allocation to develop a mathematical programming model with genetic algorithms for finding optimal solutions to the focused issue. The validity of the model is illustrated with example problems.

Radioisotope production

International Nuclear Information System (INIS)

1988-01-01

The trial production runs started in the previous report period were continued and have been extended to 67 Ga, 81 Rb/ 81m Kr and 111 In, the production of which will be taken over from the Pretoria cyclotron at the end of this year, when that machine is scheduled to be shut down. After commissioning of the target water cooling system and the helium cooling system for beam foil windows at the beginning of this year, these production runs could also be extended to high beam currents (up to 50 μA). Test consignments of a number of products have been supplied to various potential future users, and 123 I, in the form of Na 123 I capsules as well as 123 I-sodium hippurate, and 52 Fe-citrate have actually been used with success in trial diagnostic studies on patients. A procedure for labelling IPPA and 3-IPMPA with 123 I has been developed, while initial work has also been done on the radioiodination of monoclonal antifibrine antibodies. The last major facility needed for the commencement of the routine radioisotope production programme, namely the multiple-target facility, is now ready for installation in the production vault within the next few weeks, and routine production runs are expected to start in November 1988. 4 figs., 18 refs

Applying linear programming model to aggregate production planning of coated peanut products

Science.gov (United States)

Rohmah, W. G.; Purwaningsih, I.; Santoso, EF S. M.

2018-03-01

The aim of this study was to set the overall production level for each grade of coated peanut product to meet market demands with a minimum production cost. The linear programming model was applied in this study. The proposed model was used to minimize the total production cost based on the limited demand of coated peanuts. The demand values applied to the method was previously forecasted using time series method and production capacity aimed to plan the aggregate production for the next 6 month period. The results indicated that the production planning using the proposed model has resulted a better fitted pattern to the customer demands compared to that of the company policy. The production capacity of product family A, B, and C was relatively stable for the first 3 months of the planning periods, then began to fluctuate over the next 3 months. While, the production capacity of product family D and E was fluctuated over the 6-month planning periods, with the values in the range of 10,864 - 32,580 kg and 255 – 5,069 kg, respectively. The total production cost for all products was 27.06% lower than the production cost calculated using the company’s policy-based method.

Efficiency and Import Penetrationon the Productivity of Textile Industry and Textile Products

Directory of Open Access Journals (Sweden)

Catur Basuki Rakhmawan

2012-12-01

Full Text Available Although textile industry and textile products belong to the strategic sub-sector of manufacturing industry in Indonesia, they are facing problems on the availability of energy, old production machines, and the flooding of imported products into the domestic market. This study is aimed to analyze the efficiency and productivity as performance indicators and how the efficiency and import penetration affect the productivity of textile industry and textile products. The methods of data analysis used in this research are divided in two phases. The first phase, the non-metric approach of Data Envelopment Analysis (DEA is applied to measure the efficiency and productivity. Secondly, the fixed effect model of econometric regression approach is used to find out the effects of efficiency and import penetration on the productivity of textile industry and textile products. The result shows that the ave-rage level of efficiency of textile industry and textile products during the period of 2004 – 2008 is about 40 percent with a growth rate of average productivity increases 2.4 percent. Whereas, the econometric estimation results indicate that the increase of efficiency will positively and significantly affect the productivity of textile industry and textile products. On the other hand, the increase of import penetration will negatively affect the productivity of this industry.

One-carbon substrate-based biohydrogen production: microbes, mechanism, and productivity.

Science.gov (United States)

Rittmann, Simon K-M R; Lee, Hyun Sook; Lim, Jae Kyu; Kim, Tae Wan; Lee, Jung-Hyun; Kang, Sung Gyun

2015-01-01

Among four basic mechanisms for biological hydrogen (H2) production, dark fermentation has been considered to show the highest hydrogen evolution rate (HER). H2 production from one-carbon (C1) compounds such as formate and carbon monoxide (CO) is promising because formate is an efficient H2 carrier, and the utilization of CO-containing syngas or industrial waste gas may render the industrial biohydrogen production process cost-effective. A variety of microbes with the formate hydrogen lyase (FHL) system have been identified from phylogenetically diverse groups of archaea and bacteria, and numerous efforts have been undertaken to improve the HER for formate through strain optimization and bioprocess development. CO-dependent H2 production has been investigated to enhance the H2 productivity of various carboxydotrophs via an increase in CO gas-liquid mass transfer rates and the construction of genetically modified strains. Hydrogenogenic CO-conversion has been applied to syngas and by-product gas of the steel-mill process, and this low-cost feedstock has shown to be promising in the production of biomass and H2. Here, we focus on recent advances in the isolation of novel phylogenetic groups utilizing formate or CO, the remarkable genetic engineering that enhances H2 productivity, and the practical implementation of H2 production from C1 substrates. Copyright © 2014 Elsevier Inc. All rights reserved.

Linear Optimization Techniques for Product-Mix of Paints Production in Nigeria

Directory of Open Access Journals (Sweden)

Sulaimon Olanrewaju Adebiyi

2014-02-01

Full Text Available Many paint producers in Nigeria do not lend themselves to flexible production process which is important for them to manage the use of resources for effective optimal production. These goals can be achieved through the application of optimization models in their resources allocation and utilisation. This research focuses on linear optimization for achieving product- mix optimization in terms of the product identification and the right quantity in paint production in Nigeria for better profit and optimum firm performance. The computational experiments in this research contains data and information on the units item costs, unit contribution margin, maximum resources capacity, individual products absorption rate and other constraints that are particular to each of the five products produced in the company employed as case study. In data analysis, linear programming model was employed with the aid LINDO 11 software to analyse the data. The result has showed that only two out of the five products under consideration are profitable. It also revealed the rate to which the company needs to reduce cost incurred on the three other products before making them profitable for production.

Modelling production system architectures in the early phases of product development

DEFF Research Database (Denmark)

Guðlaugsson, Tómas Vignir; Ravn, Poul Martin; Mortensen, Niels Henrik

2016-01-01

are needed and appropriate to enable determination of obtainable product quality. In order to meet this challenge, it is suggested that a visual modelling framework be adopted that clarifies which product and production features are known at a specific time of the project and which features will be worked...... on – leading to an improved basis for prioritizing activities in the project. Requirements for the contents of the framework are presented, and literature on production and system models is reviewed. The production system architecture modelling framework is founded on methods and approaches in literature......This article suggests a framework for modelling a production system architecture in the early phases of product development.The challenge in these phases is that the products to be produced are not completely defined and yet decisions need to be made early in the process on what investments...

Toyota production system beyond large-scale production

CERN Document Server

Ohno, Taiichi

1998-01-01

In this classic text, Taiichi Ohno--inventor of the Toyota Production System and Lean manufacturing--shares the genius that sets him apart as one of the most disciplined and creative thinkers of our time. Combining his candid insights with a rigorous analysis of Toyota's attempts at Lean production, Ohno's book explains how Lean principles can improve any production endeavor. A historical and philosophical description of just-in-time and Lean manufacturing, this work is a must read for all students of human progress. On a more practical level, it continues to provide inspiration and instruction for those seeking to improve efficiency through the elimination of waste.

Production Function Geometry with "Knightian" Total Product

Science.gov (United States)

Truett, Dale B.; Truett, Lila J.

2007-01-01

Authors of principles and price theory textbooks generally illustrate short-run production using a total product curve that displays first increasing and then diminishing marginal returns to employment of the variable input(s). Although it seems reasonable that a temporary range of increasing returns to variable inputs will likely occur as…

Singing emotionally: A study of pre-production, production, and post-production facial expressions

Directory of Open Access Journals (Sweden)

Lena Rachel Quinto

2014-04-01

Full Text Available Singing involves vocal production accompanied by a dynamic and meaningful use of facial expressions, which may serve as ancillary gestures that complement, disambiguate, or reinforce the acoustic signal. In this investigation, we examined the use of facial movements to communicate emotion, focusing on movements arising in three epochs: before vocalisation (pre-production, during vocalisation (production, and immediately after vocalisation (post-production. The stimuli were recordings of seven vocalists’ facial movements as they sang short (14 syllable melodic phrases with the intention of communicating happiness, sadness, irritation, or no emotion. Facial movements were presented as point-light displays to 16 observers who judged the emotion conveyed. Experiment 1 revealed that the accuracy of emotional judgement varied with singer, emotion and epoch. Accuracy was highest in the production epoch, however, happiness was well communicated in the pre-production epoch. In Experiment 2, observers judged point-light displays of exaggerated movements. The ratings suggested that the extent of facial and head movements is largely perceived as a gauge of emotional arousal. In Experiment 3, observers rated point-light displays of scrambled movements. Configural information was removed in these stimuli but velocity and acceleration were retained. Exaggerated scrambled movements were likely to be associated with happiness or irritation whereas unexaggerated scrambled movements were more likely to be identified as neutral. An analysis of the motions of singers revealed systematic changes in facial movement as a function of the emotional intentions of singers. The findings confirm the central role of facial expressions in vocal emotional communication, and highlight individual differences between singers in the amount and intelligibility of facial movements made before, during, and after vocalization.

Beyond Research Productivity: Matching Productivity Measures to Institutional Mission

Directory of Open Access Journals (Sweden)

Patricia Bartholomew

2016-11-01

Full Text Available Aim/Purpose: The aim of this paper is to develop a unified methodology inclusive of the three primary areas of faculty responsibility (teaching, research, and service to calculate departmental productivity that fills the gap in methodological bench-marking tools for overall faculty productivity. Background:\tA disproportionate number of departmental and faculty productivity indices in higher education rely solely on research. Productivity in other areas of faculty workload areas, like teaching and institutional and community service, are either measured separately or ignored all together – even when those activities are institutionally mandated. This does a disservice to those who work in those institutions and skews incentives. Methodology: This paper utilizes a unified methodology inclusive of the three primary areas of faculty responsibility (teaching, research, and service to calculate depart-mental productivity in five disparate departments (English, Biology, Mathematics, Sociology, and Computer Science common to two universities with differing missions (teaching and service. Findings: The results reveal the bias inherent in relying solely on research as a proxy for overall productivity in institutions that have differing missions. Recommendations for Practitioners: Utilizing better metrics informs higher education administrators, promotes better decision-making, and allows incentives to re-align with desired outcomes. Recommendation for Researchers: This paper recommends combing all aspects of faculty workload into a single benchmark index to better measure departmental productivity. Future Research: Further research into improving this simple index is warranted and would include how to account for quality and other facets of productivity.

Productivity and Performance Measurement

DEFF Research Database (Denmark)

Hald, Kim Sundtoft; Spring, Martin

This study explores conceptually how performance measurement as discussed in the literature, enables or constrains the ability to manage and improve productivity. It uses an inter-disciplinary literature review to identify five areas of concern relating productivity accounting to the ability...... to improve productivity: “Productivity representation”; “productivity incentives”, “productivity intervention”; “productivity trade-off or synergy” and “productivity strategy and context”. The paper discusses these areas of concern and expands our knowledge of how productivity and performance measurement...

A Production Model for Deteriorating Inventory Items with Production Disruptions

OpenAIRE

Yong He; Ju He

2010-01-01

Disruption management has recently become an active area of research. In this study, an extension is made to consider the fact that some products may deteriorate during storage. A production-inventory model for deteriorating items with production disruptions is developed. Then the optimal production and inventory plans are provided, so that the manufacturer can reduce the loss caused by disruptions. Finally, a numerical example is used to illustrate the model.

New salty waffle products "Fish Krekis" with fish & plant semifinished products

Directory of Open Access Journals (Sweden)

Fedorova Dina

2016-04-01

Full Text Available The study examines the directions of expansion of the range of wafer snack products of high nutritional value by using fish & plant semifinished products. The study scientifically grounds the benefits of using the new fish & plant semifinished products in manufacturing waffle salty snack products. The data provided in the article prove that the use of the fish & plant semifinished products & herbal ingredients enable a range of the new wafer snack products «Fish krekis» with high content of proteins, organic calcium, fiber and vitamins, with improved consumer properties, as well as more efficient use of Ukrainian raw fish materials.

Product competitiveness analysis for e-commerce platform of special agricultural products

Science.gov (United States)

Wan, Fucheng; Ma, Ning; Yang, Dongwei; Xiong, Zhangyuan

2017-09-01

On the basis of analyzing the influence factors of the product competitiveness of the e-commerce platform of the special agricultural products and the characteristics of the analytical methods for the competitiveness of the special agricultural products, the price, the sales volume, the postage included service, the store reputation, the popularity, etc. were selected in this paper as the dimensionality for analyzing the competitiveness of the agricultural products, and the principal component factor analysis was taken as the competitiveness analysis method. Specifically, the web crawler was adopted to capture the information of various special agricultural products in the e-commerce platform ---- chi.taobao.com. Then, the original data captured thereby were preprocessed and MYSQL database was adopted to establish the information library for the special agricultural products. Then, the principal component factor analysis method was adopted to establish the analysis model for the competitiveness of the special agricultural products, and SPSS was adopted in the principal component factor analysis process to obtain the competitiveness evaluation factor system (support degree factor, price factor, service factor and evaluation factor) of the special agricultural products. Then, the linear regression method was adopted to establish the competitiveness index equation of the special agricultural products for estimating the competitiveness of the special agricultural products.

Ethanol production

Energy Technology Data Exchange (ETDEWEB)

Kolleurp, F; Daugulis, A J

1985-05-01

Extractive fermentation is a technique that can be used to reduce the effect of end-product inhibition through the use of a water-immiscible phase which removes fermentation products in situ. This has the beneficial effect of not only removing inhibitory products as they are formed (thus keeping reaction rates high) but also has the potential for reducing product recovery costs. We have chosen to examine the ethanol fermentation as a model system for end product inhibition and extractive fermentation, and have developed a computer model predicting the productivity enhancement possible with this technique. The model predicts an ethanol productivity of 82.6 g/L-h if a glucose feed of 750 g/L is fermented with a solvent having a distribution coefficient of 0.5 at a dilution rate of 5.0 h . This is more than 10 times higher than for a conventional chemostat fermentation of a 250 g/L glucose feed. In light of this, a systematic approach to extractive fermentation has been undertaken involving the screening of more than 1,000 solvents for their extractive properties. UNIFAC and UNIQUAC estimates of distribution coefficients and selectivities were compiled and ranked in a database, together with other important physical properties, such as density, surface tension and viscosity. Preliminary shake-flask and chemostat biocompatibility studies on the most promising solvents have been undertaken. The previous predictive, data base and experimental results are discussed.

Economic production quantity models for imperfect product and service with rework

OpenAIRE

Tai, Allen H.

2012-01-01

When imperfect quality products are produced in a production process, rework may be performed to make them become serviceable. In an inventory system, items may deteriorate. Selling deteriorated items to customers will create negative impact on corporate image. In this paper, two economic production quantity (EPQ) models are proposed for deteriorating items with rework process. A single production-rework plant system and a system consists of $n$ production plants and one rework plant are cons...

Product Platform Modeling

DEFF Research Database (Denmark)

Pedersen, Rasmus

for customisation of products. In many companies these changes in the business environment have created a controversy between the need for a wide variety of products offered to the marketplace and a desire to reduce variation within the company in order to increase efficiency. Many companies use the concept...... other. These groups can be varied and combined to form different product variants without increasing the internal variety in the company. Based on the Theory of Domains, the concept of encapsulation in the organ domain is introduced, and organs are formulated as platform elements. Included......This PhD thesis has the title Product Platform Modelling. The thesis is about product platforms and visual product platform modelling. Product platforms have gained an increasing attention in industry and academia in the past decade. The reasons are many, yet the increasing globalisation...

Estimating product-to-product variations in metal forming using force measurements

NARCIS (Netherlands)

Havinga, Gosse Tjipke; Van Den Boogaard, Ton

2017-01-01

The limits of production accuracy of metal forming processes can be stretched by the development of control systems for compensation of product-to-product variations. Such systems require the use of measurements from each semi-finished product. These measurements must be used to estimate the final

Coordiantion by using Product Specifications in Product Development

DEFF Research Database (Denmark)

Terkelsen, Søren Bendix

1997-01-01

This paper is based on a case study. It treats the coordination by generating product specifications in product development. This paper contains three very important aspects, which cause a need for coordination, and call attention to the coordination mechanisms. The three aspects are task...... uncertainty, task complexity, and dependencies between activities. If one want to select coordination mechanisms, which improve the performance in product development, it is very important to have a knowledge about these three aspects. In the following the aspects are identified in the literature...

Development of Product Availability Monitoring System In Production Unit In Automotive Component Industry

Science.gov (United States)

Hartono, Rachmad; Raharno, Sri; Yuwana Martawirya, Yatna; Arthaya, Bagus

2018-03-01

This paper described a methodology to monitor the availability of products in a production unit in the automotive component industry. Automotive components made are automotive components made through sheet metal working. Raw material coming into production unit in the form of pieces of plates that have a certain size. Raw materials that come stored in the warehouse. Data of raw each material in the warehouse are recorded and stored in a data base system. The material will then undergo several production processes in the production unit. When the material is taken from the warehouse, material data are also recorded and stored in a data base. The data recorded are the amount of material, material type, and date when the material is out of the warehouse. The material coming out of the warehouse is labeled with information related to the production processes that the material must pass. Material out of the warehouse is a product will be made. The products have been completed, are stored in the warehouse products. When the product is entered into the product warehouse, product data is also recorded by scanning the barcode contained on the label. By recording the condition of the product at each stage of production, we can know the availability of the product in a production unit in the form of a raw material, the product being processed and the finished product.

Productivity changes in OECD healthcare systems: bias-corrected Malmquist productivity approach.

Science.gov (United States)

Kim, Younhee; Oh, Dong-Hyun; Kang, Minah

2016-10-01

This study evaluates productivity changes in the healthcare systems of 30 Organization for Economic Co-operation and Development (OECD) countries over the 2002-2012 periods. The bootstrapped Malmquist approach is used to estimate bias-corrected indices of healthcare performance in productivity, efficiency and technology by modifying the original distance functions. Two inputs (health expenditure and school life expectancy) and two outputs (life expectancy at birth and infant mortality rate) are used to calculate productivity growth. There are no perceptible trends in productivity changes over the 2002-2012 periods, but positive productivity improvement has been noticed for most OECD countries. The result also informs considerable variations in annual productivity scores across the countries. Average annual productivity growth is evenly yielded by efficiency and technical changes, but both changes run somewhat differently across the years. The results of this study assert that policy reforms in OECD countries have improved productivity growth in healthcare systems over the past decade. Countries that lag behind in productivity growth should benchmark peer countries' practices to increase performance by prioritizing an achievable trajectory based on socioeconomic conditions. For example, relatively inefficient countries in this study indicate higher income inequality, corresponding to inequality and health outcomes studies. Although income inequality and globalization are not direct measures to estimate healthcare productivity in this study, these issues could be latent factors to explain cross-country healthcare productivity for future research. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

What Happens to Integrated Product Development Models with Product/Service-System Approaches?

DEFF Research Database (Denmark)

Tan, Adrian; McAloone, Timothy Charles; Andreasen, Mogens Myrup

2006-01-01

Integrated Product Development (IPD) has traditionally focused on the development activities relating to physical technological artefacts. With the advent of business approaches for manufacturing firms based on providing customers the utility of integrated products and services – a term dubbed...... ‘product/service-systems (PSS)’ – companies need to extend their activities to include new dimensions of development. Within the paradigm of mass production and consumption, traditional product-oriented business strategies regarded physical technological artefacts (products) as the mediators of customer...... value. Value was based on the exchange of products between a providing company and a receiving customer. The more products the company could sell, the more revenue it generated. At the point of sale the ownership and responsibility of the product was transferred from company to customer. A customer...

Defining product intake fraction to quantify and compare exposure to consumer products

DEFF Research Database (Denmark)

Jolliet, Oliver; Ernstoff, Alexi; Csiszar, Susan A.

2015-01-01

There is a growing consciousness that exposure studies need to better cover near-field exposure associated with products use. To consistently and quantitatively compare human exposure to chemicals in consumer products, we introduce the concept of product intake fraction, as the fraction...... of a chemical within a product that is eventually taken in by the human population. This metric enables consistent comparison of exposures during consumer product use for different product-chemical combinations, exposure duration, exposure routes and pathways and for other life cycle stages. We present example...... modalities within life cycle assessment and risk assessment contexts. The product intake fraction helps to provide a clear interface between the life cycle inventory and impact assessment phases, to identify best suited sentinel products and to calculate overall exposure to chemicals in consumer products...

QUANTIFYING SUPPLIERS’ PRODUCT QUALITY: AN EXPLORATORY PRODUCT AUDIT METHOD

Directory of Open Access Journals (Sweden)

S. Avakh Darestani

2012-01-01

Full Text Available

ENGLISH ABSTRACT:The quality of the raw material and supplied product from suppliers plays a critical role in the quality of the final product. It has become the norm that vehicle manufacturers require their suppliers to measure product quality and service with a product audit method. Measuring quality of product is emphasised by QS9000 VDA6.5 and ISO/TS16949. From a competitive standpoint, and also to see continuous improvement in business, companies need to monitor their suppliers’ performance. Quality and delivery are two very important indicators of supplier performance. This paper presents a statistical method for measuring the quality of supplied product. This method allocates different weights to variables and attributes characteristics. Moreover, following normal distribution, the tolerance zone is divided to three regions with different scores. Therefore, the quality of suppliers’ products can be monitored based on the Product Quality Audit Score (PQAS. However, this method may be employed for organisations to monitor their raw material, work-in-process parts, and final product. It can be an indicator to monitor supplier quality behaviour.

AFRIKAANSE OPSOMMING: Die gehalte van grondstowwe en produkte/komponente wat deur leweransiers verskaf word, speel ‘n kritiese rol in die gehalte van die finale produk. Dit het die norm geword in die motorvervaardigingsbedryf dat daar van leweransiers verwag word om hulle produkkwaliteit en –diens te meet by wyse van ‘n produkouditmetode. Die meting van produkkwaliteit word benadruk deur QS9000 VDA6.5 en ISO/TS16949. Uit ‘n mededingingshoek en ook om kontinue verbetering te monitor, is dit noodsaaklik dat leweransiers se verrigting gemeet word. Gehalte en aflewering is twee van die belangrikste indikatore van leweransiersverrigting. In hierdie artikel word ‘n statistiese model voorgehou vir die meting van die kwaliteit van die gelewerde produk. Die metode ken verskillende

COTTAGE CHEESE PRODUCTS FUNCTIONALITY

Directory of Open Access Journals (Sweden)

L. V. Golubeva

2015-01-01

Full Text Available Cottage cheese products holds a significant place among the dairy and milk-containing products. The range of products includes cheese: cheese, pastes, creams, cakes, etc. Such diversity can be attributed to their popularity among the population and benefit brought by the body from regular use. Curd protein is much better and easier to digest by the body than protein fish, meat or milk. Rich curd products lysine and methionine. Minerals contained in cheese products have a positive effect on bone formation and structure of tissues. The composition of curd products, in addition to cheese and dairy ingredients may include non-dairy ingredients origin. Today, for the production of cheese products use the most advanced technologies to further enrich its structure and significantly improve the nutritional value. Pine nut is widely used in the manufacture of many dairy products. But, in most cases, the production of dairy products as a filler used pine nut cake, which deprives the finished product valuable cedar oil. The authors proposed a technology for producing curd product with the addition of pine nuts and honey (pine nuts and fructose. Compatible with cream cheese filling insertion determined sensory organoleptic point scale. he optimum dosage of components: pine nuts – 5 %, honey – 10 % fructose – 7 %. Technological process of cottage cheese product is different from the traditional operations training components and their introduction into the finished cheese. Identify indicators of quality of the new product. Production of curd products thus expanding the range of dairy products functional orientation.

Tunnel production enhances quality in organic carrot seed production

DEFF Research Database (Denmark)

Deleuran, L C; Boelt, B

2009-01-01

production of open-pollinated carrot varieties increased the yield and germination percentages when compared with normal field conditions. Yield was in the range of 100-250 g and 2-17 g seeds m-2 respectively, and germination percentage was 84-95 and 43-55, respectively. However, hybrid carrot seed...... production showed lower yields than did their open-pollinated counterparts. Yields ranging from 60-123 g seeds m-2 can be obtained, but the production needs to be carefully planned and monitored. Different growing systems in tunnels have been studied in both open-pollinated and hybrid carrot (Daucus carota L......In Denmark, organic vegetable seed production is possible for some of the late-maturing species when the maturing is performed in lightweight tunnels which are also relevant for the isolation of small-scale production. The tunnel system offers several advantages, e.g., it is possible to control...

Evaluating the Impact of a New Product on the Sales of other Products

Directory of Open Access Journals (Sweden)

Julian Andreev Vasilev

2014-12-01

Full Text Available The purpose of this article is to evaluate the impact of a new product on the sales of other products. Launching a new product may lead to increase or decrease of sales in the products of the same group. Customers may continue buying standard products or they may be oriented to new products. New products may cause internal competition. Statistical methods are applied. Time series analysis is used. Transactional database of a confectionary factory is the main source of data. The time series analysis is carried in two datasets – quantities of sales of three products on a daily basis and on a monthly basis. The main methods used are time series analysis and regression analysis. The three time series (corresponding to the three products are separated into two parts – before and after launching the new product. It is proved that the new product does not affect the sales of the two other products. The new product is well accepted and its sales increase together with the sales of the two other products.

Comparison of Employer Productivity Metrics to Lost Productivity Estimated by Commonly Used Questionnaires.

Science.gov (United States)

Gardner, Bethany T; Dale, Ann Marie; Buckner-Petty, Skye; Van Dillen, Linda; Amick, Benjamin C; Evanoff, Bradley

2016-02-01

The aim of the study was to assess construct and discriminant validity of four health-related work productivity loss questionnaires in relation to employer productivity metrics, and to describe variation in economic estimates of productivity loss provided by the questionnaires in healthy workers. Fifty-eight billing office workers completed surveys including health information and four productivity loss questionnaires. Employer productivity metrics and work hours were also obtained. Productivity loss questionnaires were weakly to moderately correlated with employer productivity metrics. Workers with more health complaints reported greater health-related productivity loss than healthier workers, but showed no loss on employer productivity metrics. Economic estimates of productivity loss showed wide variation among questionnaires, yet no loss of actual productivity. Additional studies are needed comparing questionnaires with objective measures in larger samples and other industries, to improve measurement methods for health-related productivity loss.

Comparison of employer productivity metrics to lost productivity estimated by commonly used questionnaires

Science.gov (United States)

Gardner, Bethany T.; Dale, Ann Marie; Buckner-Petty, Skye; Van Dillen, Linda; Amick, Benjamin C.; Evanoff, Bradley

2016-01-01

Objective To assess construct and discriminant validity of four health-related work productivity loss questionnaires in relation to employer productivity metrics, and to describe variation in economic estimates of productivity loss provided by the questionnaires in healthy workers. Methods 58 billing office workers completed surveys including health information and four productivity loss questionnaires. Employer productivity metrics and work hours were also obtained. Results Productivity loss questionnaires were weakly to moderately correlated with employer productivity metrics. Workers with more health complaints reported greater health-related productivity loss than healthier workers, but showed no loss on employer productivity metrics. Economic estimates of productivity loss showed wide variation among questionnaires, yet no loss of actual productivity. Conclusions Additional studies are needed comparing questionnaires with objective measures in larger samples and other industries, to improve measurement methods for health-related productivity loss. PMID:26849261

Sustainable Industrial Product Systems. Integration of Life Cycle Assessment in Product development and Optimization of Product Systems

Energy Technology Data Exchange (ETDEWEB)

Hanssen, Ole Joergen

1997-12-31

This thesis contributes to the development and testing of environmental life cycle assessment (LCA) in product development and management in industry. It is based on systems theory and systems engineering. It develops a method for sustainable product development that has been successfully tested in the Nordic project called NEP. The LCA method is also a basis for an optimization model, where life cycle economy and environmental impacts from product systems are optimized with a non-linear model. A more complete mathematical model for LCA, based on the functional requirements on a product system, is also developed. The statistical properties of emission factors are studied using a data set from the Swedish Kraft Mill industry. It is shown that emission factors may be assumed constants in the LCA model, but with rather large variations within a population of Kraft mills. It is shown that there are a few environmental impacts which are important for most types of products under Scandinavian conditions, especially global warming potential, acidification, human toxicity and fossil energy depletion. There are significant differences between the contribution to these impacts from different life cycle stages, where raw material processing and use of products are generally more important than the other stages. Test cases indicate that there are no large conflicts between improvements in environmental impacts and customer requirements. Environmental improvements seem to increase purchase cost of products in some cases, but the life cycle cost of the products seem in most cases to be reduced. It is concluded that there are opportunities for 30-50% improvements in product system, based on relatively simple modifications of the systems. 246 refs., 63 figs., 19 tabs.

Product Category Layout and Organization: Retail Placement of Food Products

NARCIS (Netherlands)

Herpen, van E.

2016-01-01

This article discusses the placement of food products in retail stores, in particular how the placement of food products can influence how consumers perceive the store in general and these products in particular. It reviews the overall layout of the store, assortment organization, and shelf

Biofuels versus food production: Does biofuels production increase food prices?

International Nuclear Information System (INIS)

Ajanovic, Amela

2011-01-01

Rapidly growing fossil energy consumption in the transport sector in the last two centuries caused problems such as increasing greenhouse gas emissions, growing energy dependency and supply insecurity. One approach to solve these problems could be to increase the use of biofuels. Preferred feedstocks for current 1st generation biofuels production are corn, wheat, sugarcane, soybean, rapeseed and sunflowers. The major problem is that these feedstocks are also used for food and feed production. The core objective of this paper is to investigate whether the recent increase of biofuels production had a significant impact on the development of agricultural commodity (feedstock) prices. The most important impact factors like biofuels production, land use, yields, feedstock and crude oil prices are analysed. The major conclusions of this analysis are: In recent years the share of bioenergy-based fuels has increased moderately, but continuously, and so did feedstock production, as well as yields. So far, no significant impact of biofuels production on feedstock prices can be observed. Hence, a co-existence of biofuel and food production seems possible especially for 2nd generation biofuels. However, sustainability criteria should be seriously considered. But even if all crops, forests and grasslands currently not used were used for biofuels production it would be impossible to substitute all fossil fuels used today in transport.

Diversity and functional traits of culturable microbiome members, including cyanobacteria in the rice phyllosphere.

Science.gov (United States)

Venkatachalam, S; Ranjan, K; Prasanna, R; Ramakrishnan, B; Thapa, S; Kanchan, A

2016-07-01

The diversity and abundance of culturable microbiome members of the rice phyllosphere was investigated using cv. Pusa Punjab Basmati 1509. Both diversity and species richness of bacteria were significantly higher in plants in pots in a semi-controlled environment than those in fields. Application of fertilisers reduced both diversity and species richness in field-grown plants under a conventional flooded system of rice intensification (SRI) and in dry-seeded rice (DSR) modes. Sequence analyses of 16S rDNA of culturable bacteria, those selected after amplified ribosomal DNA restriction analysis (ARDRA), showed the dominance of α-proteobacteria (35%) and actinobacteria (38%); Pantoea, Exiguobacterium and Bacillus were common among the culturable phyllospheric bacteria. About 34% of 83 culturable bacterial isolates had higher potential (>2 μg·ml(-1) ) for indole acetic acid production in the absence of tryptophan. Interestingly, the phyllosphere bacterial isolates from the pot experiment had significantly higher potential for nitrogen fixation than isolates from the field experiment. Enrichment for cyanobacteria showed both unicellular forms and non-heterocystous filaments under aerobic as well as anaerobic conditions. PCR-DGGE analysis of these showed that aerobic and anaerobic conditions as well as the three modes of cultivation of rice in the field strongly influenced the number and abundance of phylotypes. The adaptability and functional traits of these culturable microbiome members suggest enormous diversity in the phyllosphere, including potential for plant growth promotion, which was also significantly influenced by the different methods of growing rice. © 2016 German Botanical Society and The Royal Botanical Society of the Netherlands.

Factors regulating nitrogenase activity and hydrogen evolution in Azolla-Anabaena symbiosis

Energy Technology Data Exchange (ETDEWEB)

Banerjee, M.; Kumar, A.; Kumar, H.D. (Banaras Hindu Univ., Varanasi (India). Dept. of Botany)

1989-01-01

Nitrogenase activity and H{sub 2} production capacity have been studied in intact Azolla plants. Under aerobic conditions the plants showed a C{sub 2}H{sub 2} reduction rate of 6.65 nmoles C{sub 2}H{sub 4} mg {sup -1} fresh weight in light at 48 h. Considerable activity was also present in the dark. Though H{sub 2} evolution was detected under aerobic conditions there was multifold stimulation under anaerobic conditions. There was no significant change in nitrogenase activity under anaerobic conditions. Increasing concentrations of O{sub 2} inhibited nitrogenase activity but 5% O{sub 2} proved stimulatory for H{sub 2} evolution in light. In the dark, there was a gradual stimulation in H{sub 2} evolution even up to 20% O{sub 2}. The addition of combined nitrogen sources, namely NH{sub 4}Cl or KNO{sub 3} (10 mM), resulted in complete inhibition of the C{sub 2}H{sub 2}-reduction activity within 48 h, but H{sub 2} evolution was not inhibited. Indeed, these combined nitrogen sources stimulated H{sub 2} evolution. Though nitrogenase activity was affected, the heterocyst frequency remained unaltered. Phosphate addition resulted in significant stimulation of nitrogenase and H{sub 2} evolution activity. These results suggest that nitrogenase and H{sub 2} evolution activity in Azolla are affected by a number of factors which show a differential effect on nitrogenase and H{sub 2} evolution. Furthermore, our results indicate the presence of a soluble reversible hydrogenase in Azolla. (author).

A Salt-Inducible Mn-Catalase (KatB) Protects Cyanobacterium from Oxidative Stress.

Science.gov (United States)

Chakravarty, Dhiman; Banerjee, Manisha; Bihani, Subhash C; Ballal, Anand

2016-02-01

Catalases, enzymes that detoxify H2O2, are widely distributed in all phyla, including cyanobacteria. Unlike the heme-containing catalases, the physiological roles of Mn-catalases remain inadequately characterized. In the cyanobacterium Anabaena, pretreatment of cells with NaCl resulted in unusually enhanced tolerance to oxidative stress. On exposure to H2O2, the NaCl-treated Anabaena showed reduced formation of reactive oxygen species, peroxides, and oxidized proteins than the control cells (i.e. not treated with NaCl) exposed to H2O2. This protective effect correlated well with the substantial increase in production of KatB, a Mn-catalase. Addition of NaCl did not safeguard the katB mutant from H2O2, suggesting that KatB was indeed responsible for detoxifying the externally added H2O2. Moreover, Anabaena deficient in KatB was susceptible to oxidative effects of salinity stress. The katB gene was strongly induced in response to osmotic stress or desiccation. Promoter-gfp analysis showed katB to be expressed only in the vegetative cells but not in heterocysts. Biochemically, KatB was an efficient, robust catalase that remained active in the presence of high concentrations of NaCl. Our findings unravel the role of Mn-catalase in acclimatization to salt/oxidative stress and demonstrate that the oxidative stress resistance of an organism can be enhanced by a simple compound such as NaCl. © 2016 American Society of Plant Biologists. All Rights Reserved.

Screening and selection of most potent diazotrophic cyanobacterial isolate exhibiting natural tolerance to rice field herbicides for exploitation as biofertilizer.

Science.gov (United States)

Singh, Surendra; Datta, Pallavi

2006-01-01

Periodic applications of heavy dosages of herbicides in modern rice-agriculture are a necessary evil for obtaining high crop productivity. Such herbicides are not only detrimental to weeds but biofertilizer strains of diazotrophic cyanobacteria also. It is therefore, essential to screen and select such biofertilizer strains of diazotrophic cyanobacteria exhibiting natural tolerance to common rice-field herbicides that can be further improved by mutational techniques to make biofertilizer technology a viable one. Therefore, efforts have been made to screen five dominant diazotrophic cyanobacterial forms e.g. filamentous heterocystous Nostoc punctiforme , Nostoc calcicola , Anabaena variabilis and unicellular Gloeocapsa sp. and Aphanocapsa sp. along with standard laboratory strain Nostoc muscorum ISU against increasing concentrations (0-100 mg l(-1) of four commercial grade common rice-field herbicides i.e. Arozin, Butachlor, Alachlor and 2,4-D under diazotrophic growth conditions. The lethal and IGC(50) concentrations for all four herbicides tested were found highest for A. variabilis as compared to other test cyanobacteria. The lowest reduction in chlorophyll a content, photosynthetic oxygen evolution, and N(2)-fixation was found in A. variabilis as compared to other rice field isolates and standard laboratory strain N. muscorum ISU. On the basis of prolong survival potential and lowest reductions in vital metabolic activities tested at IGC(50) concentration of four herbicides, it is concluded that A. variabilis is the most potent and promising cyanobacterial isolate as compared with other forms. This could be further improved by mutational techniques for exploitation as most potential and viable biofertilizer strain.

Global product development

DEFF Research Database (Denmark)

Hansen, Zaza Nadja Lee; Ahmed-Kristensen, Saeema

2011-01-01

Globalisation has enabled companies to globalise their product development process. Today, everything from manufacturing to R&D can be globally distributed. This has led to a more complex and disintegrated product development process. This paper investigates the impacts companies have experienced...... operational solutions to counteract the negative impacts with varying degrees of success. This paper presents a unique look into global product development through an investigation of its impact on the organisation, the product development process, and the product. Furthermore, it shows the solutions...... as a result of this, and how they have been addressed. Data was collected through case studies of five Danish multinational corporations. The findings showed that the companies experienced several challenges when they globalised their product development process. They consequently implemented various...

Product Platform Performance

DEFF Research Database (Denmark)

Munk, Lone

The aim of this research is to improve understanding of platform-based product development by studying platform performance in relation to internal effects in companies. Platform-based product development makes it possible to deliver product variety and at the same time reduce the needed resources...... engaging in platform-based product development. Similarly platform assessment criteria lack empirical verification regarding relevance and sufficiency. The thesis focuses on • the process of identifying and estimating internal effects, • verification of performance of product platforms, (i...... experienced representatives from the different life systems phase systems of the platform products. The effects are estimated and modeled within different scenarios, taking into account financial and real option aspects. The model illustrates and supports estimation and quantification of internal platform...

Formulation of a Production Strategy for a Software Product Line

Science.gov (United States)

2009-08-01

Strategy 9 5.1 Identifying the Critical Factors 9 5.1.1 Market Analysis 10 5.1.2 Building a Business Case 10 5.1.3 Scoping 10 5.1.4 Technology...ability to deliver new products quickly (i.e., its time to market ). The production strategy for a software product line is the high-level description of... strategy . The critical factors mentioned above refer to both market conditions that affect an organ- ization and how an organization’s products can

Product prioritization in a two-stage food production system with intermediate storage

DEFF Research Database (Denmark)

Akkerman, Renzo; van Donk, Dirk Pieter

2007-01-01

In the food-processing industry, usually a limited number of storage tanks for intermediate storage is available, which are used for different products. The market sometimes requires extremely short lead times for some products, leading to prioritization of these products, partly through...... the performance improvements for the prioritized product, as well as the negative effects for the other products. We also show how the effect decreases with more storage tanks, and increases with more products....... the dedication of a storage tank. This type of situation has hardly been investigated, although planners struggle with it in practice. This paper aims at investigating the fundamental effect of prioritization and dedicated storage in a two-stage production system, for various product mixes. We show...

Heavy Flavour Production

CERN Document Server

Nason, Paolo; Ridolfi, Giovanni

1995-01-01

We review the status of heavy flavour production in QCD. Comparison of experimental and theoretical results for top and bottom production are given. Selected topics in charm production are also discussed.

Making online products more tangible : the effect of product presentation formats on product evaluations

NARCIS (Netherlands)

Verhagen, Tibert; Vonkeman, Charlotte; van Dolen, Willemijn

2016-01-01

Although several studies have looked at the effects of online product presentations on consumer decision making, no study thus far has considered a potential key factor in online product evaluations: tangibility. The present study aims at filling this gap by developing and testing a model that

Production and distribution of livestock products in Aomori prefecture: Part 1

International Nuclear Information System (INIS)

Iyogi, Takashi; Hisamatsu, Shun'ichi; Inaba, Jiro

2000-01-01

We have collected natural and sociological environmental data related to the estimation of radiation dose by radionuclides which will be released from nuclear fuel cycle facilities. Published data concerning production and distribution of livestock products in Aomori Prefecture were collected and compiled. We tried to estimate market dilution coefficient, which is the ratio of local products to total consumption by people in a target area, for the livestock products from the compiled data under some assumptions. Production weight per unit field area (production density) and consumption rates of grass and feed by the domestic animals were also estimated by using the collected data. Estimated means of the market dilution coefficients for livestock products and production density of grass were lower than those used in the environmental assessment for a reprocessing plant now under construction in Rokkasho Village. Consumption rates of grass and feed by milk cows and beef cattle were higher than those used in the assessment. Since we assumed that milk cows and beef cattle of Aomori Prefecture consume only grass and feed produced in Aomori Prefecture, the rates may be overestimated. Further study is required to clarify this point. We collected 52 reports in the literature related to transfer reduction of radionuclides to livestock products and decontamination of the radionuclides. (author)

Fuzzy production planning models for an unreliable production system with fuzzy production rate and stochastic/fuzzy demand rate

Directory of Open Access Journals (Sweden)

K. A. Halim

2011-01-01

Full Text Available In this article, we consider a single-unit unreliable production system which produces a single item. During a production run, the production process may shift from the in-control state to the out-of-control state at any random time when it produces some defective items. The defective item production rate is assumed to be imprecise and is characterized by a trapezoidal fuzzy number. The production rate is proportional to the demand rate where the proportionality constant is taken to be a fuzzy number. Two production planning models are developed on the basis of fuzzy and stochastic demand patterns. The expected cost per unit time in the fuzzy sense is derived in each model and defuzzified by using the graded mean integration representation method. Numerical examples are provided to illustrate the optimal results of the proposed fuzzy models.

Generalized product

OpenAIRE

Greco, Salvatore; Mesiar, Radko; Rindone, Fabio

2014-01-01

Aggregation functions on [0,1] with annihilator 0 can be seen as a generalized product on [0,1]. We study the generalized product on the bipolar scale [–1,1], stressing the axiomatic point of view. Based on newly introduced bipolar properties, such as the bipolar increasingness, bipolar unit element, bipolar idempotent element, several kinds of generalized bipolar product are introduced and studied. A special stress is put on bipolar semicopulas, bipolar quasi-copulas and bipolar copulas.

Workforce productivity.

Science.gov (United States)

Williams, Ruth

2012-10-26

Managers who are responsible for delivering the workforce productivity element of the Quality, Innovation, Productivity and Prevention (QIPP) programme can network and share best practice through a dedicated NHS Employers webpage.

Productivity and production efficiency among small scale irrigated ...

African Journals Online (AJOL)

The study examined productivity and production efficiency among small scale irrigated sugarcane farmers in Niger State, Nigeria using a stochastic translog frontier function. Data for the study were obtained using structured questionnaires administered to 100 randomly selected sugarcane farmers from Paiko and Gurara ...

Leading co-production

DEFF Research Database (Denmark)

Tortzen, Anne

leadership styles executed by public managers affect the quality and public value of co-production processes? The paper argues that publicly initiated co-production initiatives are influenced by conflicting governance logics placing public managers in an institutional cross pressure (Lowndes & Roberts, 2013...... of building networks and relations, developing trust and focusing on empowerment and on the participants' resources to develop innovative solutions Drawing on three qualitative case studies of ‘most likely' co-production cases in Danish municipalities, the study identifies three different leadership styles...... and increase public value (Bovaird & Löffler, 2012; Osborne, 2010). The paper argues that a deeper understanding of the dynamics of co-production can be gained from analyzing the leadership dimension of co-production processes, which has hitherto not been given much attention by co-production researchers...

The economic production lot size model with several production rates

DEFF Research Database (Denmark)

Larsen, Christian

should be chosen in the interval between the demand rate and the production rate, which minimize unit production costs, and should be used in an increasing order. Then, given the production rates, we derive closed form solutions for the optimal runtimes as well as the minimum average cost. Finally we...

Efficiency and Import Penetration on the Productivity of Textile Industry and Textile Products

Directory of Open Access Journals (Sweden)

Catur Basuki Rakhmawan

2012-12-01

Full Text Available Although textile industry and textile products belong to the strategic sub-sector of manufacturing industry in Indonesia, they are facing problems on the availability of energy, old production machines, and the flooding of imported products into the domestic market. This study is aimed to analyze the efficiency and productivity as performance indicators and how the efficiency and import penetration affect the productivity of textile industry and textile products. The methods of data analysis used in this research are divided in two phases. The first phase, the non-metric approach of Data Envelopment Analysis (DEA is applied to measure the efficiency and productivity. Secondly, the fixed effect model of econometric regression approach is used to find out the effects of efficiency and import penetration on the productivity of textile industry and textile products. The result shows that the average level of efficiency of textile industry and textile products during the period of 2004 – 2008 is about 40 percent with a growth rate of average productivity increases 2.4 percent. Whereas, the econometric estimation results indicate that the increase of efficiency will positively and significantly affect the productivity of textile industry and textile products. On the other hand, the increase of import penetration will negatively affect the productivity of this industry.

Fission products collecting devices

International Nuclear Information System (INIS)

Matsumoto, Hiroshi

1979-01-01

Purpose: To enable fission products trap with no contamination to coolants and cover gas by the provision of a fission products trap above the upper part of a nuclear power plant. Constitution: Upon fuel failures in a reactor core, nuclear fission products leak into coolants and move along the flow of the coolants to the coolants above the reactor core. The fission products are collected in a trap container and guided along a pipeline into fission products detector. The fission products detector monitors the concentration of the fission products and opens the downstream valve of the detector when a predetermined concentration of the fission products is detected to introduce the fission products into a waste gas processing device and release them through the exhaust pipe. (Seki, T.)

Urinary incontinence products

Science.gov (United States)

... this page: //medlineplus.gov/ency/article/003973.htm Urinary incontinence products To use the sharing features on this ... There are many products to help you manage urinary incontinence . You can decide which product to choose based ...

Sucrose in Cyanobacteria: From a Salt-Response Molecule to Play a Key Role in Nitrogen Fixation

Directory of Open Access Journals (Sweden)

María A. Kolman

2015-01-01

Full Text Available In the biosphere, sucrose is mainly synthesized in oxygenic photosynthetic organisms, such as cyanobacteria, green algae and land plants, as part of the carbon dioxide assimilation pathway. Even though its central position in the functional biology of plants is well documented, much less is known about the role of sucrose in cyanobacteria. In those prokaryotes, sucrose accumulation has been associated with salt acclimation, and considered as a compatible solute in low-salt tolerant strains. In the last years, functional characterizations of sucrose metabolizing enzymes, metabolic control analysis, cellular localization of gene expressions, and reverse genetic experiments have revealed that sucrose metabolism is crucial in the diazotrophic growth of heterocystic strains, and besides, that it can be connected to glycogen synthesis. This article briefly summarizes the current state of knowledge of sucrose physiological functions in modern cyanobacteria and how they might have evolved taking into account the phylogenetic analyses of sucrose enzymes.

Cyanobacterial Oxygenic Photosynthesis is Protected by Flavodiiron Proteins

Directory of Open Access Journals (Sweden)

Yagut Allahverdiyeva

2015-03-01

Full Text Available Flavodiiron proteins (FDPs, also called flavoproteins, Flvs are modular enzymes widely present in Bacteria and Archaea. The evolution of cyanobacteria and oxygenic photosynthesis occurred in concert with the modulation of typical bacterial FDPs. Present cyanobacterial FDPs are composed of three domains, the β-lactamase-like, flavodoxin-like and flavin-reductase like domains. Cyanobacterial FDPs function as hetero- and homodimers and are involved in the regulation of photosynthetic electron transport. Whilst Flv2 and Flv4 proteins are limited to specific cyanobacterial species (β-cyanobacteria and function in photoprotection of Photosystem II, Flv1 and Flv3 proteins, functioning in the “Mehler-like” reaction and safeguarding Photosystem I under fluctuating light conditions, occur in nearly all cyanobacteria and additionally in green algae, mosses and lycophytes. Filamentous cyanobacteria have additional FDPs in heterocyst cells, ensuring a microaerobic environment for the function of the nitrogenase enzyme under the light. Here, the evolution, occurrence and functional mechanisms of various FDPs in oxygenic photosynthetic organisms are discussed.

Production control system specified quality sausage products

Directory of Open Access Journals (Sweden)

A. V. Tokarev

2016-01-01

Full Text Available The problem of management of production target in technological system of production of sausages of the set quality is considered in article. Decomposition of technological system is considered. Functions of management are allocated: formation of an optimum compounding of forcemeat, expert analysis of a compounding, laboratory analysis of a compounding and its statement. Information technology of interaction of these functions is offered. The mathematical problem definition of finding of an optimum compounding meat product with use of possible substitutes of ingredients is presented. This mathematical problem is a classical linear programming problem whose solution has the standard program. Since the manufacture of the finished product are various nonlinear effects are taken into account at the present time it is practically impossible, the methodology provided in this operation "Expert analysis of the formulation" and "Laboratory analysis of the finished product." An example of calculating the optimum alternative base recipe "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. For an alternative formulation demands were made at a cost of meat, the ingredient composition, as well as the final product organoleptic and physic-chemical indicators should comply with regulatory requirements "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. Indicator acid activity (pH calculated stuffing formulation should be in the range 6.0-6.3. As a partial replacement for the main raw material have been proposed acceptable substitutes. It was necessary to calculate on the basis of the formulation "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002 optimal price and quality alternative formulation. As a result of depreciation of the value of alternative stuffing recipe was 14,5 % when all of the restrictions on the consumer properties. The proposed information technology implemented in the software package "Multi

All Plasma Products Are Not Created Equal: Characterizing Differences Between Plasma Products

Science.gov (United States)

2015-06-01

Research and the US Department of Defense. The pooling and solvent detergent treatment processes performed to manufacture the Octaplas and Kedrion products ...All plasma products are not created equal: Characterizing differences between plasma products Philip C. Spinella, MD, Elfaridah Frazier, PhD, Heather... products that may affect efficacy and safety. METHODS: Four different plasma products were analyzed to include fresh frozen plasma (FFP), liquid plasma

COMPETITIVE PRODUCT ADVANTAGES

Directory of Open Access Journals (Sweden)

Adrian MICU

2006-01-01

Full Text Available Cost advantages may be either internal or external. Internal economics of scope, scale, or experience, and external economies of focus or logistical integration, enable a company to produce some products at a lower cost than the competition. The coordination of pricing with suppliers, although not actually economizing resources, can improve the efficiency of pricing by avoiding the incrementalization of a supplier's nonincremental fixed costs and profit. Any of these strategies can generate cost advantages that are, at least in the short run, sustainable. Even cost advantages that are not sustainable, however, can generate temporary savings that are often the key to building more sustainable cost or product advantages later.. Even when a product's physical attributes are not readily differentiable, opportunities to develop product advantages remain. The augmented product that customers buy is more than the particular product or service exchanged. It includes all sorts of ancillary services and intangible relationships that make buying thesame product from one company less difficult, less risky, or more pleasant than buying from a competitor. Superior augmentation of the same basic product can add substantial value in the eyes of consumers, leading them to pay willingly what are often considerable price premiums.

Primary productivity

Digital Repository Service at National Institute of Oceanography (India)

Verlecar, X.N.; Parulekar, A.H.

Photosynthetic production in the oceans in relation to light, nutrients and mixing processes is discussed. Primary productivity in the estuarine region is reported to be high in comparison to coastal and oceanic waters. Upwelling phenomenon...

Extended Producer Responsibility and Product Stewardship for Tobacco Product Waste.

Science.gov (United States)

Curtis, Clifton; Collins, Susan; Cunningham, Shea; Stigler, Paula; Novotny, Thomas E

2014-09-01

This paper reviews several environmental principles, including Extended Producer Responsibility (EPR), Product Stewardship (PS), the Polluter Pays Principle (PPP), and the Precautionary Principle, as they may apply to tobacco product waste (TPW). The review addresses specific criteria that apply in deciding whether a particular toxic product should adhere to these principles; presents three case studies of similar approaches to other toxic and/or environmentally harmful products; and describes 10 possible interventions or policy actions that may help prevent, reduce, and mitigate the effects of TPW. EPR promotes total lifecycle environmental improvements, placing economic, physical, and informational responsibilities onto the tobacco industry, while PS complements EPR, but with responsibility shared by all parties involved in the tobacco product lifecycle. Both principles focus on toxic source reduction, post-consumer take-back, and final disposal of consumer products. These principles when applied to TPW have the potential to substantially decrease the environmental and public health harms of cigarette butts and other TPW throughout the world. TPW is the most commonly littered item picked up during environmental, urban, and coastal cleanups globally.

Production of carboxylic acid and salt co-products

Science.gov (United States)

Hanchar, Robert J.; Kleff, Susanne; Guettler, Michael V.

2014-09-09

This invention provide processes for producing carboxylic acid product, along with useful salts. The carboxylic acid product that is produced according to this invention is preferably a C.sub.2-C.sub.12 carboxylic acid. Among the salts produced in the process of the invention are ammonium salts.

Sustainable aggregates production : green applications for aggregate by-products.

Science.gov (United States)

2015-06-01

Increased emphasis in the construction industry on sustainability and recycling requires production of : aggregate gradations with lower dust (cleaner aggregates) and smaller maximum sizeshence, increased : amount of quarry by-products (QBs). QBs ...

Product plots.

Science.gov (United States)

Wickham, Hadley; Hofmann, Heike

2011-12-01

We propose a new framework for visualising tables of counts, proportions and probabilities. We call our framework product plots, alluding to the computation of area as a product of height and width, and the statistical concept of generating a joint distribution from the product of conditional and marginal distributions. The framework, with extensions, is sufficient to encompass over 20 visualisations previously described in fields of statistical graphics and infovis, including bar charts, mosaic plots, treemaps, equal area plots and fluctuation diagrams. © 2011 IEEE

A Conceptual Model for Production Leveling (Heijunka) Implementation in Batch Production Systems

OpenAIRE

De Araujo , Luciano Fonseca; De Queiroz , Abelardo Alves

2009-01-01

International audience; This paper explains an implementation model for a new method for Production Leveling designed for batch production system. The main structure of this model is grounded on three constructs: traditional framework for Operations Planning, Lean Manufacturing concepts for Production Leveling and case study guidelines. By combining the first and second construct, a framework for Production Leveling has been developed for batch production systems. Then, case study guidelines ...

improving citric acid production from some carbohydrates by-products using irradiated aspergillus niger

International Nuclear Information System (INIS)

Farag, S.S.

2011-01-01

Twenty strains of A. niger were isolated from different sources, screened for their capacity to produce citric acid. All the isolated strains were able to produce citric acid in different quantities at different time intervals i.e. 4, 8 and 12 days on indicator medium. The best incubation period for production for all isolates was 12 days. The most potent strains for production were A 1 , A 4 and A 5 , while A 8 , A 1 6, A 18 and A 19 recorded weak production on that medium. Citric acid productivity were obtained by all strains when using different concentrations of four carbohydrate by-products (maize straw, potato peel wastes, sugar beet pulp and molasses) when each used alone without any additions after 12 days incubation and the production enhanced when the fermentation medium amended with the same concentrations of the mentioned substrates. Type and concentration of carbohydrate by-product affect the production of citric acid by A. niger strains under the study. Increasing substrate concentration led to increase in production, the best concentration for production was 25% for all carbohydrate by-products. As recorded with indicator medium, A 1 , A 4 and A 5 are also the most potent strains for production when growing on the four carbohydrate by-products supplemented to the basal medium, while A 8 , A 6 , A 18 and A 19 recorded the weak production with the carbohydrate by-products used.production of the parental isolates A 1 , A 4 and A 5 on indicator medium were: 0.96, 0.95 and 0.99 (mg/ml) respectively after 12 days incubation, while maximum production by the obtaining resulting isolates (Treated by UV irradiation) were: 1.78, 1.70 and 1.73 (mg/ml) from A 4 T 2 (5 min.), A 4 T 1 (10 min.) and A 1 T 1 (5 min.), respectively.

Advances in production technology

CERN Document Server

2015-01-01

This edited volume contains the selected papers presented at the scientific board meeting of the German Cluster of Excellence on “Integrative Production Technology for High-Wage Countries”,  held in November 2014. The topical structure of the book is clustered in six sessions: Integrative Production Technology, Individualised Production, Virtual Production Systems, Integrated Technologies, Self-Optimising Production Systems and Human Factors in Production Technology. The Aachen perspective on a holistic theory of production is complemented by conference papers from external leading researchers in the fields of production, materials science and bordering disciplines. The target audience primarily comprises research experts and practitioners in the field but the book may also be beneficial for graduate students.

Smart consumer products with a pathfinder product development strategy

Science.gov (United States)

Robertson, Alec

1994-09-01

It is generally acknowledged that technologies diffuse through industry and that the rate of diffusion varies both within different industries and according to the circumstances. Innovation is a process involving risk, especially during the adoption and adaptation of a powerful new technology. Central to a consumer products success using new technology is the quality of their designs and the nature of their forms. Form is of prime importance in influencing the purchasing decisions of consumers and it is also influential in determining the relationships between people in its use environment. The acceptance of a new product into the world is often unduly ad hoc. Many failures are created for each success and there are few guidelines to assist the formulation of a strategy for creating an appropriate form. It is suggested below that success of consumer products incorporating 'smart structures' may be determined not only by the function of products and systems, but also by the form they take. The definition of a desirable product form depends entirely on the point of view taken: technological, commercial, ecological, cultural, and social. However any design using new will incorporate the old and the new. The probability of acceptance of a new product is enhanced by maintaining a fine balance between imaginative and creative form and that with which people are familiar and prefer: a new design may be rejected if it is too novel and unfamiliar, or too traditional. The acceptance of a new product and its subsequent development depends on the success designers and engineers have when dealing with the initial forms, particularly using new technology such as 'smart structures'.

Polling, production & priorities

NARCIS (Netherlands)

Winands, E.M.M.

2007-01-01

Polling, Production & Priorities The present monograph focuses on the so-called stochastic economic lot scheduling problem (SELSP), which deals with the make-to-stock production of multiple standardized products on a single machine with limited capacity under random demands, possibly random setup

Production of highly unsaturated fatty acids using agro-processing by-products

CSIR Research Space (South Africa)

Jacobs, A

2008-11-01

Full Text Available The South African agro-processing industry generates millions of tons of cereal derived by-products annually. The by-products from biofuel production are expected to increase these volumes dramatically. Highly unsaturated fatty acids (HUFA...

Evaluating the Impact of a New Product on the Sales of other Products

OpenAIRE

Julian Andreev Vasilev

2014-01-01

The purpose of this article is to evaluate the impact of a new product on the sales of other products. Launching a new product may lead to increase or decrease of sales in the products of the same group. Customers may continue buying standard products or they may be oriented to new products. New products may cause internal competition. Statistical methods are applied. Time series analysis is used. Transactional database of a confectionary factory is the main source of data. The time series an...

MANAGING PRODUCT SAFETY SYSTEM HACCP ON THE EXAMPLE OF BEET-SUGAR PRODUCTION

Directory of Open Access Journals (Sweden)

V. A. Golybin

2015-01-01

Full Text Available The most effective safety management system of food production in all industrialized countries in the world recognized by the system based on the principles of HACCP. In Russia, the conformity assessment carried out by the HACCP system certification. The essence of the HACCP system is to identify and control the critical points. Critical Control Point – this is the stage of the process, which is subject to control for hazard identification and risk management in order to avoid the production of unsafe products. Implementation of HACCP system allows to tighten and coordinate the quality control system, which will improve the competitiveness of the products produced in the sugar market in Russia and abroad. In the early stages of food production HACCP system to prevent the occurrence of danger. It is based on the preventive approach to ensuring quality and safety in the production process, and can also be used in the development of new products. HACCP system is based on seven main principles to ensure the implementation and management of the system in production. 1. Creation of a working group of the coordinator and the technical secretary and various consultants. 2. Information on materials and products, in this case of sugar beet and sugar. 3. Information about the production. 4. Risk analysis of the available chemical, physical and microbiological factors. To determine the critical control points according to the results obtained for each factor is determined by a special chart the extent of its accounting. The need to consider the potential hazard is determined by the order in which area it has got. 5. The production program of mandatory preliminary activities in the production of sugar. 6. Determination of critical control points. 7. Making worksheets HACCP. It is shown that the use of HACCP in sugar beet production has several advantages.

The Virtual Product-Process Design Laboratory for Structured Chemical Product Design and Analysis

DEFF Research Database (Denmark)

Mattei, Michele; Yunus, Nor Alafiza Binti; Kalakul, Sawitree

2014-01-01

The objective of this paper is to present new methods for design of chemicals based formulated products and their implementation in the software, the Virtual Product-Process Design Laboratory. The new products are tailor-made blended liquid products and emulsion-based products. The new software...

Modeling intermediate product selection under production and storage capacity limitations in food processing

DEFF Research Database (Denmark)

Kilic, Onur Alper; Akkerman, Renzo; Grunow, Martin

2009-01-01

In the food industry products are usually characterized by their recipes, which are specified by various quality attributes. For end products, this is given by customer requirements, but for intermediate products, the recipes can be chosen in such a way that raw material procurement costs and pro...... with production and inventory planning, thereby considering the production and storage capacity limitations. The resulting model can be used to solve an important practical problem typical for many food processing industries.......In the food industry products are usually characterized by their recipes, which are specified by various quality attributes. For end products, this is given by customer requirements, but for intermediate products, the recipes can be chosen in such a way that raw material procurement costs...... and processing costs are minimized. However, this product selection process is bound by production and storage capacity limitations, such as the number and size of storage tanks or silos. In this paper, we present a mathematical programming approach that combines decision making on product selection...

Production Leveling (Heijunka) Implementation in a Batch Production System: A Case Study

OpenAIRE

Araujo , Luciano Fonseca; Queiroz , Abelardo Alves

2009-01-01

International audience; This paper presents a case study of an implementation of a new method for Production Leveling designed for batch production. It includes prioritizing criteria of products and level production plan. Moreover, it was applied on a subsidiary of a multinational enterprise located on Brazil, which manufacturing processes comprise batch production in a make-to-stock policy. Regarding a qualitative assessment, evidences show that the company had deficient practices related to...

Economic Feasibility of Functional Meat Products for Commercial Production in India

Directory of Open Access Journals (Sweden)

Varalakshmi Kandanuri

2017-07-01

Full Text Available This paper analyses the production of functional chicken meat products from economic perspectives. It analyses and compares the economics and investment feasibility on different size groups of processing plants in India. The primary data on input use and output yield were taken from studies of NRCM and data was analysed using economic analysis and investment appraisal techniques like NPV, IRR(%, BC ratio, and Break even analysis. The results indicated that the cost of production of functional products was 5.2 and 5.18 and 4.59 US dollars per kg on small, medium and large scale units respectively. All the processing units are found to be economically feasible with NPV of US$ 12727, 64661 and 153703, IRR of 26%,31% and 42% and B-C ratio was estimated as 1.56, 1.78 and 2.29 for small, medium and large scale units respectively. Economies of scale is evident form all perspectives like production costs, profits, discounting measures and breakeven point. The study found the feasibility of functional meat products in India for commercial production.

Ergonomic Product Design 21

International Nuclear Information System (INIS)

Kwon, Yeong Guk

1996-09-01

This book explains basic of ergonomic product design with human engineering, image engineering and strategy of that design, ergonomic industrial design, which includes product design to access the human engineering in development of new product and customer satisfaction, application technology of image engineering, industrial design of human engineering item and strategy of human engineering, a good ergonomic design. It also tells of examples of convenient design for human such as hardware product and software product in automobile, telephones for ergonomic product in the future, new goods and new technology, ergonomic product in house and office, and computers and robots in the future.

Optimal Product Placement.

Science.gov (United States)

Hsu, Chia-Ling; Matta, Rafael; Popov, Sergey V; Sogo, Takeharu

2017-01-01

We model a market, such as an online software market, in which an intermediary connects sellers and buyers by displaying sellers' products. With two vertically-differentiated products, an intermediary can place either: (1) one product, not necessarily the better one, on the first page, and the other hidden on the second page; or (2) both products on the first page. We show that it can be optimal for the intermediary to obfuscate a product-possibly the better one-since this weakens price competition and allows the sellers to extract a greater surplus from buyers; however, it is not socially optimal. The choice of which one to obfuscate depends on the distribution of search costs.

Thermophilic Biohydrogen Production

DEFF Research Database (Denmark)

Karakashev, Dimitar Borisov; Angelidaki, Irini

2011-01-01

Dark fermentative hydrogen production at thermophilic conditions is attractive process for biofuel production. From thermodynamic point of view, higher temperatures favor biohydrogen production. Highest hydrogen yields are always associated with acetate, or with mixed acetate- butyrate type...... fermentation. On the contrary the hydrogen yield decreases, with increasing concentrations of lactate, ethanol or propionate. Major factors affecting dark fermentative biohydrogen production are organic loading rate (OLR), pH, hydraulic retention time (HRT), dissolved hydrogen and dissolved carbon dioxide...... concentrations, and soluble metabolic profile (SMP). A number of thermophilic and extreme thermophilic cultures (pure and mixed) have been studied for biohydrogen production from different feedstocks - pure substrates and waste/wastewaters. Variety of process technologies (operational conditions...

Production planning of a perishable product with lead time and non-stationary demand

NARCIS (Netherlands)

Pauls-Worm, K.G.J.; Haijema, R.; Hendrix, E.M.T.; Rossi, R.; Vorst, van der J.G.A.J.

2012-01-01

We study a production planning problem for a perishable product with a fixed lifetime, under a service-level constraint. The product has a non-stationary stochastic demand. Food supply chains of fresh products like cheese and several crop products, are characterised by long lead times due to

Validation of Product Properties Considering a High Variety of Complex Products

OpenAIRE

Kortler, S.;Kohn, A.;Lindemann, U.

2017-01-01

Validation processes are becoming more and more complex. Due to rising technical capabilities and a wide variety of customer requirements, OEMs are increasing their product variety in order to increase profits. According to the various characteristics of subcontracted components involved in complex products, the product variety can be very high. The impacts of the involved subcontracted components on the composed product variety during the product’s application are difficult to predict. This ...

Enriching step-based product information models to support product life-cycle activities

Science.gov (United States)

Sarigecili, Mehmet Ilteris

The representation and management of product information in its life-cycle requires standardized data exchange protocols. Standard for Exchange of Product Model Data (STEP) is such a standard that has been used widely by the industries. Even though STEP-based product models are well defined and syntactically correct, populating product data according to these models is not easy because they are too big and disorganized. Data exchange specifications (DEXs) and templates provide re-organized information models required in data exchange of specific activities for various businesses. DEXs show us it would be possible to organize STEP-based product models in order to support different engineering activities at various stages of product life-cycle. In this study, STEP-based models are enriched and organized to support two engineering activities: materials information declaration and tolerance analysis. Due to new environmental regulations, the substance and materials information in products have to be screened closely by manufacturing industries. This requires a fast, unambiguous and complete product information exchange between the members of a supply chain. Tolerance analysis activity, on the other hand, is used to verify the functional requirements of an assembly considering the worst case (i.e., maximum and minimum) conditions for the part/assembly dimensions. Another issue with STEP-based product models is that the semantics of product data are represented implicitly. Hence, it is difficult to interpret the semantics of data for different product life-cycle phases for various application domains. OntoSTEP, developed at NIST, provides semantically enriched product models in OWL. In this thesis, we would like to present how to interpret the GD & T specifications in STEP for tolerance analysis by utilizing OntoSTEP.

Engineering microbial cell factories for the production of plant natural products: from design principles to industrial-scale production.

Science.gov (United States)

Liu, Xiaonan; Ding, Wentao; Jiang, Huifeng

2017-07-19

Plant natural products (PNPs) are widely used as pharmaceuticals, nutraceuticals, seasonings, pigments, etc., with a huge commercial value on the global market. However, most of these PNPs are still being extracted from plants. A resource-conserving and environment-friendly synthesis route for PNPs that utilizes microbial cell factories has attracted increasing attention since the 1940s. However, at the present only a handful of PNPs are being produced by microbial cell factories at an industrial scale, and there are still many challenges in their large-scale application. One of the challenges is that most biosynthetic pathways of PNPs are still unknown, which largely limits the number of candidate PNPs for heterologous microbial production. Another challenge is that the metabolic fluxes toward the target products in microbial hosts are often hindered by poor precursor supply, low catalytic activity of enzymes and obstructed product transport. Consequently, despite intensive studies on the metabolic engineering of microbial hosts, the fermentation costs of most heterologously produced PNPs are still too high for industrial-scale production. In this paper, we review several aspects of PNP production in microbial cell factories, including important design principles and recent progress in pathway mining and metabolic engineering. In addition, implemented cases of industrial-scale production of PNPs in microbial cell factories are also highlighted.

CONSIDERATIONS UPON MILK AND DAIRY PRODUCT PRODUCTION IN THE U.S.A.

Directory of Open Access Journals (Sweden)

AGATHA POPESCU

2008-05-01

Full Text Available The paper aimed to present the evolution of milk production and dairy products in the USA during the period 2004-2006, based on USDA Statistics. The USA is a top produce of milk and dairy products in the world. Milk production accounted for 181,798 Millions Pounds in the year 2006. Its continuously increase during the last years has been positively influenced by the increasing number of dairy cows and average milk yield . The top states are California, Wisconsin, New York, Idaho and Pennsylvania, which all together achieve about 54 % of the country milk production. Over 99.37 % of Milk Production is marketed. Considering all milk marketings, Million USD 23,422 cash receiptscould be obtained from a dairy farm in the year 2006. The average return per Cwt was about USD 13 in 2006 . Milk is processed by about 1,000 manufacturing plants in a large variety of dairy products. Cheese production was about 9.5 Billion Pounds in the last analyzed years. The US also produces important amounts of butter , yogurt, ice cream etc. About 8.3 % of the US dairy products are exported, the most markets being Japan, Mexico and Canada.

How companies embed non-quantifiable product qualities through their product development process

OpenAIRE

Guldbrandsen, Marianne Norden

2006-01-01

Many consumer products have reached a high level of technical product quality. Rapid adoption of new technologies and access to a global market means that markets are getting saturated. This means that technical differentiation is often not enough to sell a product and products compete more and more on intangible product qualities - these are meant to delight, bring pleasure, be easy to use and to create an experience. These qualities are often difficult to measure in the pr...

Product Configuration Systems and Consequences for Productivity and Quality

DEFF Research Database (Denmark)

Pedersen, Jørgen Lindgaard; Edwards, Kasper

2004-01-01

with informations about expected and realised costs and benefits in implemented PCS's we have the following results: the three highest aggregated scoring expected benefits are: 1)improved quality in specifications, 2)lower turnaround time, and 3)using less resources.The results achieved are in accordance......Product Configuration Systems (PCS) are systems to produce quotations to potential buyers of the products an enterprise produces. Typically the products are complex and will first be produced according to specific needs from the customers. From twelve case studies in Danish industry...

Simulation Study of a Vehicle Production Line for Productivity Improvement

Directory of Open Access Journals (Sweden)

M.F.F. Ab Rashid

2015-06-01

Full Text Available This paper presents the study of a motorcycle frame production line in a particular company in Malaysia. Due to the high demand, the company needs to increase its production by at least 12% compared with current output. In order to improve productivity, the production-floor data was collected and simulated using the discrete event simulation approach. Later, a number of suggestions for improvement were simulated to identify the effect of the suggestions on productivity. In addition, cost analysis was also undertaken to identify the profit margin for a particular period of time for each suggestion. Simulation results indicate that there are three suggestions that are able to fulfill the 12% volume increment. In the short term, the suggestion to hire an assistant line leader will give instant effect to the profit. Meanwhile, for the medium term, Poka-yoke will give higher profit compared with the others, while in the long term, SOP (standard operating procedure implementation will yield a better profit margin. In future, the simulation of a dynamic demand model for this product is suggested to cope with new trends in the market.

Principles and practices of lean production applied in a metal structures production system

OpenAIRE

Carvalho, Rogério; Alves, Anabela Carvalho; Lopes, Isabel da Silva

2011-01-01

This paper presents a work undertaken in a metal structures production system in a company producing several assorted products for the civil construction. The work aim was to improve the production process, solving several productive problems encountered in the production system, such as: deliveries delays, long lead times, too many material handling, high stocks, errors and defects in metal structures assembly and production, and unnecessary motions. The identified problems were analyzed and...

GROWTH PERFORMANCE AND PRODUCTIVITY OF RUBBER & PLASTIC PRODUCTS INDUSTRY IN PUNJAB

Directory of Open Access Journals (Sweden)

GULSHAN KUMAR

2010-01-01

Full Text Available Present study is an endeavour to investigate growth pattern and productivity trends in small scale rubber and plastic products industry of Punjab. The growth of industry has been gauged in terms of variables - number of units, fixed investment, employment and production. Yearly growth rates have been computed to catch year- to- year fluctuations in growth and compound annual growth rates (CAGRs have been worked out to ascertain the impact of the policies of liberalized regime on growth of this industry. Productivity trends have been sketched in terms of partial factor productivities of labour and capital. In order to understand the strengths and weaknesses of the industry, SWOT analysis has been conducted. The study revealed that the liberalisation has promoted the use of capital intensive and labour saving techniques of production leading to a dismal growth of employment and sluggish growth of number of units.

Health products inspection

International Nuclear Information System (INIS)

Stoltz, M.

2009-01-01

To protect public health, the Health Products Inspection is a public service mission where the application of regulations concerning activities on human health products and cosmetic products is verified. This mission permits a global approach to assess the health products risk-based benefit and, in monitoring by laboratory testing and by on site inspections, to verify their compliance with appropriate regulations. The seventy five inspectors perform about eight hundred inspections per year, in France and abroad. These inspections are related to data provided in the health products assessment and also to manufacturing and delivery practices. The French inspection body is also involved in the training of foreign inspectors and in the harmonization of national, European and international practices either for operators than for the competent authorities. (author)

Chemical Product Design

DEFF Research Database (Denmark)

Gani, Rafiqul

2004-01-01

This paper highlights for a class of chemical products, the design process, their design with respect to the important issues, the need for appropriate tools and finally, lists some of the challenges and opportunities for the process systems engineering (PSE)/computer-aided process engineering...... (CAPE) community. The chemical products considered belong to the following types: chemical/biochemical/agrochemical products, coatings and solvents, food (nutraceuticals), HIM (household, industrial and institutional), personal care, pharmaceuticals and drugs. The challenges and opportunities...... are highlighted in terms of the needs for multi-level modeling with emphasis on property models that are suitable for computer-aided applications, flexible solution strategies that are able to solve a large range of chemical product design problems and finally, a systems chemical product design framework...

Production and economic characteristics of sheep production on the island of Pag

Directory of Open Access Journals (Sweden)

Marina Krvavica

2012-03-01

Full Text Available The aim of the research was to learn from a survey about the production and economic characteristics of sheep production as well as economic position and developmental orientation of sheep breeders on the island of Pag. Data on production and economic characteristics of sheep production on the island of Pag were collected from a survey and processed through relevant descriptive statistics methods. The respondents have on average 47 breeding sheep, 2 rams and 9 sheep intended for flock renewal rate (not older than one year; which means an average flock has 58 sheep. The average total income from sheep production in 2009 was 72,460.10 HRK. The average total production costs in 2009 were 13,260.10 HRK, including the costs of fodder and veterinary services. All farms achieved positive financial results of 59,199.90 HRK in average. As many as three quarters of respondents indicated profitability of sheep production as the main motivation to engage in sheep production; very few indicated that heritage and inability to do other jobs were the main motivation. Important limiting factors for future development of sheep breeding on the island of Pag in most farms are lack of potential heirs and high average age of farm holders. Regarding the effects of joining the European Union, half the breeders intend to improve their production and harmonise it with the EU requirements and standards; one quarter of them intend to keep the existing production capacity; and another quarter intend to quit with production.

Development of Production Control in Small Batch Production

Directory of Open Access Journals (Sweden)

Németh Péter

2016-01-01

Full Text Available Our aim with this paper is to develop a new performance measurement and control system for small batch production in the automotive industry. For this reason, we present our previous research results for warehouse performance measurement and adopt its methodology to production control. The proposed method is based on artificial intelligence (neural networks.

Product, Organizational and Performance Effects of Product Modularity

DEFF Research Database (Denmark)

Boer, Henrike Engele Elisabeth

2014-01-01

beyond these industries. To be able to establish whether firms not part of these industries would experience the same performance effects, survey research will be needed. To support future survey research, this paper proposes an operationalization of product modularity and details the link between...... product modularity and firm performance, to support the future development of measures and hypotheses....

Is past academic productivity predictive of radiology resident academic productivity?

Science.gov (United States)

Patterson, Stephanie K; Fitzgerald, James T; Boyse, Tedric D; Cohan, Richard H

2002-02-01

The authors performed this study to determine whether academic productivity in college and medical school is predictive of the number of publications produced during radiology residency. The authors reviewed the records of 73 radiology residents who completed their residency from 1990 to 2000. Academic productivity during college, medical school, and radiology residency, other postgraduate degrees, and past careers other than radiology were tabulated. The personal essay attached to the residency application was reviewed for any stated academic interest. Residents were classified as being either previously productive or previously unproductive. Publication rates during residency and immediately after residency were compared for the two groups. For the productive residents, a correlation analysis was used to examine the relationship between past frequency of publication and type of previous activity. Least-squares regression analysis was used to investigate the relationship between preresidency academic productivity, advanced degrees, stated interest in academics, and other careers and radiology residency publications. There was no statistically significant difference in the number of articles published by those residents who were active and those who were not active before residency (P = .21). Only authorship of papers as an undergraduate was weakly predictive of residency publication. These selected measures of academic productivity as an undergraduate and during medical school are not helpful for predicting publication during residency. There was no difference in publication potential between those residents who were academically productive in the past and those who were not.

Nephrotoxicity of Natural Products.

Science.gov (United States)

Nauffal, Mary; Gabardi, Steven

2016-01-01

The manufacture and sale of natural products constitute a multi-billion dollar industry. Nearly a third of the American population admit to using some form of complementary or alternative medicine, with many using them in addition to prescription medications. Most patients fail to inform their healthcare providers of their natural product use and physicians rarely inquire. Annually, thousands of natural product-induced adverse events are reported to Poison Control Centers nationwide. Natural product manufacturers are not responsible for proving safety and efficacy, as the FDA does not regulate them. However, concerns exist surrounding the safety of natural products. This review provides details on natural products that have been associated with renal dysfunction. We have focused on products that have been associated with direct renal injury, immune-mediated nephrotoxicity, nephrolithiasis, rhabdomyolysis with acute renal injury, hepatorenal syndrome, and common adulterants or contaminants that are associated with renal dysfunction. The potential for natural products to cause renal dysfunction is justifiable. It is imperative that natural product use be monitored closely in all patients. Healthcare practitioners must play an active role in identifying patients using natural products and provide appropriate patient education. © 2016 S. Karger AG, Basel.

Dictionaries for text production

DEFF Research Database (Denmark)

Fuertes-Olivera, Pedro; Bergenholtz, Henning

2018-01-01

Dictionaries for Text Production are information tools that are designed and constructed for helping users to produce (i.e. encode) texts, both oral and written texts. These can be broadly divided into two groups: (a) specialized text production dictionaries, i.e., dictionaries that only offer...... a small amount of lexicographic data, most or all of which are typically used in a production situation, e.g. synonym dictionaries, grammar and spelling dictionaries, collocation dictionaries, concept dictionaries such as the Longman Language Activator, which is advertised as the World’s First Production...... Dictionary; (b) general text production dictionaries, i.e., dictionaries that offer all or most of the lexicographic data that are typically used in a production situation. A review of existing production dictionaries reveals that there are many specialized text production dictionaries but only a few general...

SMART Product Innovation

DEFF Research Database (Denmark)

Cramer-Petersen, Claus L.; Ahmed-Kristensen, Saeema; Li, Xuemeng

2016-01-01

. The ambition of The Danish Industry Foundation and The Kata Foundation was to develop a method; a robust and specific approach to ensure that product innovation in Danish enterprises in practice would result in products of the highest quality, producible at lower costs and profitable at competitive prices...... products to our neighboring countries continues to suffer. The customers’ financial capacity has been reduced and cheaper products from Asia and other regions have found their way into our local markets. Competition is fierce – especially pricewise. This was the starting point for the SMART project...

Sustainable hydrogen production

Energy Technology Data Exchange (ETDEWEB)

Block, D.L.; Linkous, C.; Muradov, N.

1996-01-01

This report describes the Sustainable Hydrogen Production research conducted at the Florida Solar Energy Center (FSEC) for the past year. The report presents the work done on the following four tasks: Task 1--production of hydrogen by photovoltaic-powered electrolysis; Task 2--solar photocatalytic hydrogen production from water using a dual-bed photosystem; Task 3--development of solid electrolytes for water electrolysis at intermediate temperatures; and Task 4--production of hydrogen by thermocatalytic cracking of natural gas. For each task, this report presents a summary, introduction/description of project, and results.

Banana production systems: identification of alternative systems for more sustainable production.

Science.gov (United States)

Bellamy, Angelina Sanderson

2013-04-01

Large-scale, monoculture production systems dependent on synthetic fertilizers and pesticides, increase yields, but are costly and have deleterious impacts on human health and the environment. This research investigates variations in banana production practices in Costa Rica, to identify alternative systems that combine high productivity and profitability, with reduced reliance on agrochemicals. Farm workers were observed during daily production activities; 39 banana producers and 8 extension workers/researchers were interviewed; and a review of field experiments conducted by the National Banana Corporation between 1997 and 2002 was made. Correspondence analysis showed that there is no structured variation in large-scale banana producers' practices, but two other banana production systems were identified: a small-scale organic system and a small-scale conventional coffee-banana intercropped system. Field-scale research may reveal ways that these practices can be scaled up to achieve a productive and profitable system producing high-quality export bananas with fewer or no pesticides.

Probiotic fermented dairy products

OpenAIRE

Adnan Tamime; Rajka Božanić; Irena Rogelj

2003-01-01

Fermented dairy products are the most popular vehicle used in theindustry for the implantation of the probiotic microflora in humans. Therefore this paper provides an overview of new knowledge on probiotic fermented dairy products. It involves historical developments, commercial probiotic microorganisms and products, and their therapeutic properties, possibilities of quality improvement of different types of newly developed fermented dairy products together with fermented goat’s milk products.

Measuring green productivity of country: A generlized metafrontier Malmquist productivity index approach

International Nuclear Information System (INIS)

Yu-Ying Lin, Eugene; Chen, Ping-Yu; Chen, Chi-Chung

2013-01-01

This paper measures environmental productivity in 70 countries over the period 1981–2007. Differences in green (environmental) productivity growth across countries under distinct country specific production frontier are measured using directional distance function model, which incorporates desirable output (GDP) and undesirable output (CO 2 emissions). The metafrontier which envelops the two country groups, developed countries and developing countries, are estimated using balanced panel data for the sample countries over the study period. A parametric method is used to compute technical efficiency change, technical change, and scale efficiency change, which aggregate to the generalized metafrontier Malmquist productivity index. The overall results indicated the two country groups operated under distinct stochastic production frontiers and therefore used different production technologies. It is found that developing countries achieved higher growth in their average environmental productivity relative to the metafrontier. Thus the results coincide with the convergence growth theory

Resolving traceability issues of product derivation for software product lines

OpenAIRE

Abid, Saad bin

2009-01-01

peer-reviewed Dealing with traceability management issues during model based product derivation in large complex industrial SPL is error prone due to the lack of tool support. As a result traceability management between connected models emerges as an important research topic. In this position paper, we discuss research challenges as scenarios from developed example product line and give recommendations on resolving traceability issues during product derivation. We also discuss initial idea...

Study of by-products of agro-food industries which could be used for bio-fuel production (animal fat, used food oils, and wine production by-products). Synthesis of the final report

International Nuclear Information System (INIS)

Gomy, Catherine; Thonier, Gregoire; Gagnepain, Bruno; Mhiri, Tarek

2015-04-01

As the Renewable Energy directive proposes the implementation of incentive arrangements for the production of bio-fuels from biomass, this report proposes a synthesis of a study which addressed three by-products of agro-food industry and of catering (collective, traditional, fast) which can help to reach objectives of energy production from biomass: used food oils, rendered animal fat of category 1 and 2, and vinification by-products (grape marc, lees, sludge). The objectives were to quantify, at the French national and regional levels, present resources and uses for these three by-products, non-valorised volumes and thus potentially available volumes for the production of liquid bio-fuels, to identify present actors and their interactions, and to study the potential of local production of liquid bio-fuels. The study comprised a comprehensive analysis of production and valorisation sectors for the three addressed types of by-products, and an identification of recent experiments implemented for the production of liquid bio-fuels. This synthesis states the lessons learned from the study of these three different sectors, and proposes recommendations for further developments

[Legislative regulation of production and turnover of products for people with different diseases].

Science.gov (United States)

Pritul'skaia, N V; Motuzka, Iu N; Antiushko, D L

2013-01-01

This article presents results of analysis of existing regulatory documents and approaches to the legislative regulation of production and turnover of special dietary products for people with specific diseases in EU, Ukraine and Russian Federation. According to the EU legislation, production and turnover of food products for nutritional support of people during specific diseases and the rehabilitation period are regulated by the Commission Directive 1999/21/EC, 2009/39/ES, by Regulation Commission (EU) No 953/2009 and documents of Codex Committee. Special food products for people with specific diseases in Ukrainian legislation are classified as nutrition products for special dietary use and are regulated by the following Laws of Ukraine "On the safety and quality of food", "On ensuring of sanitary and epidemiological welfare of the population", "On Consumer Rights Protection", "On advertising" and by other non-legislative acts. According to the current legislation of the Russian Federation, the products for people with specific diseases are classified as healthy dietary food products. The basis of the legal framework are federal laws "On the quality and safety of food", "On the sanitary-epidemiological welfare of the populations", "On technical regulations and technical regulations of the Customs Union "On Food Safety" and "On the safety of certain types of specialized food products, including healthy dietary food products and therapeutic dietary food products". There is no common approach to the legal regulation of production and turnover of products for people with specific diseases in the world. The proposals for further harmonization of regulatory control in this area have been developed.

Product derivation in software product families : a case study

NARCIS (Netherlands)

Deelstra, S; Sinnema, M; Bosch, J

2005-01-01

From our experience with several organizations that employ software product families, we have learned that, contrary to popular belief, deriving individual products from shared software assets is a time-consuming and expensive activity. In this paper we therefore present a study that investigated

Supporting product-servicing networks

NARCIS (Netherlands)

Camarihna-Matos, L.M.; Ferrada, F.; Oliveira, A.I.; Afsarmanesh, H.; Aboutajdine, D.; Skalli, A.; Benchekroun, B.; Artiba, A.

2013-01-01

Service-based enhancement of products represents a growing trend, particularly in the context of complex products. A service-enhanced product can be seen as a market proposition that extends the traditional functionality of a product by incorporating additional business services, which not only

Intelligent products : A survey

NARCIS (Netherlands)

Meyer, G.G.; Främling, K.; Holmström, J.

This paper presents an overview of the field of Intelligent Products. As Intelligent Products have many facets, this paper is mainly focused on the concept behind Intelligent Products, the technical foundations, and the achievable practical goals of Intelligent Products. A novel classification of

Making Product Customization Profitable

DEFF Research Database (Denmark)

Mortensen, Niels Henrik; Hvam, Lars; Haug, Anders

2010-01-01

The main result presented in this paper is the Framework for Product Family Master Plan. This framework supports the identification of a product architecture for companies that customize products and services. The framework has five coherent aspects, the market, product assortment, supply...

Product Knowledge Modelling and Management

DEFF Research Database (Denmark)

Zhang, Y.; MacCallum, K. J.; Duffy, Alex

1996-01-01

function-oriented design. Both Specific Product Knowledge and Product Domain Knowledge are modelled at two levels, a meta-model and an information-level.Following that, a computer-based scheme to manage the proposed product lknowledge models within a dynamically changing environment is presented.......The term, Product Knowledge is used to refer to two related but distinct concepts; the knowledge of a specific product (Specific Product Knowledge) and the knowledge of a product domain (Product Domain Knowledge). Modelling and managing Product Knowlege is an essential part of carrying out design.......A scheme is presented in this paper to model, i.e. classify, structure and formalise the product knowledge for the purpose of supporting function-oriented design. The product design specification and four types of required attributes of a specific product have been identified to form the Specific Product...

Commercial production of metal hafnium and hafnium-based products

International Nuclear Information System (INIS)

Negodin, D.A.; Shtutsa, M.G.; Akhtonov, S.G.; Il'enko, E.V.; Kobyzev, A.M.

2012-01-01

Hafnium possesses a unique complex of physical and chemical properties which allow the application of products on its basis in various industries. Joint Stock Company 'Chepetsky Mechanical Plant' is the single enterprise which produces hafnium on the territory of Russia. The manufacture of metal hafnium with the total content of zirconium and hafnium, at least, 99,8 % of weights is developed at the present time at Joint Stock Company CHMZ. The weight of melted hafnium ingots is up to 1 ton. Manufacture of wide range of products from hafnium is implemented. The plates from a hafnium with thickness of 0.60 mm which are used for emergency control cartridges of VVER-440 reactors are the most critical product. It is shown that ingots and products obtained from metal hafnium correspond to the Russian and international standards for reactor materials in chemical composition, mechanical and corrosion properties.

Kerogen-bound and free hopanoic acids in the messel oil shale kerogen.

Science.gov (United States)

Abbott, G D; Bashir, F Z; Sugden, M A

2001-08-01

The distribution of the free and bound hopanoic acids in both unheated and heated (350 degrees C for 50 h) kerogens, isolated from the Messel oil shale, were analyzed by GC-MS. The bound acids were released by subjecting the kerogen to three different treatments, namely, thermochemolysis in the presence of tetramethylammonium hydroxide (TMAH), as well as basic and acidic hydrolyses. All of these methods gave a series of hopanoic acids ranging from C(30) to C(34), in which the biological 17beta, 21beta(H) configuration is prominent. Both 22R and 22S epimers are present for the C(30) acid, whereas the others are dominated by the sidechain 22R-configuration. Thermochemolysis in the presence of TMAH was the most efficient in releasing kerogen-bound hopanoids. Following pyrolysis, the acids are generated and released into the free fraction with apparent epimerization occurring at C-17, C-21, and C-22. The bound hopanoic acids may be both chemically bonded as well as possibly being physically encapsulated within the macromolecular fraction of sedimentary organic matter. They are therefore either generated by breaking the bonds which bind them to the kerogen or they are released as a result of the macromolecular cage being broken apart. Copyright 2001 Wiley-Liss, Inc.

Evidence supporting product standards for carcinogens in smokeless tobacco products.

Science.gov (United States)

Hatsukami, Dorothy K; Stepanov, Irina; Severson, Herb; Jensen, Joni A; Lindgren, Bruce R; Horn, Kimberly; Khariwala, Samir S; Martin, Julia; Carmella, Steven G; Murphy, Sharon E; Hecht, Stephen S

2015-01-01

Smokeless tobacco products sold in the United States vary significantly in yields of nicotine and tobacco-specific nitrosamines (TSNA). With the passage of the Family Smoking Prevention and Tobacco Control Act, the Food and Drug Administration now has the authority to establish product standards. However, limited data exist determining the relative roles of pattern of smokeless tobacco use versus constituent levels in the smokeless tobacco product in exposure of users to carcinogens. In this study, smokeless tobacco users of brands varying in nicotine and TSNA content were recruited from three different regions in the U.S. Participants underwent two assessment sessions. During these sessions, demographic and smokeless tobacco use history information along with urine samples to assess biomarkers of exposure and effect were collected. During the time between data collection, smokeless tobacco users recorded the amount and duration of smokeless tobacco use on a daily basis using their diary cards. Results showed that independent of pattern of smokeless tobacco use and nicotine yields, levels of TSNA in smokeless tobacco products played a significant role in carcinogen exposure levels. Product standards for reducing levels of TSNA in smokeless tobacco products are necessary to decrease exposure to these toxicants and potentially to reduce risk for cancer. ©2014 American Association for Cancer Research.

Side-stream products of edible oil refining as feedstocks in biodiesel production

Directory of Open Access Journals (Sweden)

Cvetković Bojan S.

2016-01-01

Full Text Available Biodiesel, a diesel fuel alternative, is produced from vegetable oils and animal fats by the transesterification reaction of triacylglycerols and lower aliphatic alcohols. Beside number advantages related to fossil fuels, the main barrier to biodiesel wider commercial use is the high price of edible oils. Recently, the special attention was given to side-stream products of edible oil refining as low-cost triacylglycerol sources for biodiesel production because of their positive economic and ecological effects. In this paper, the different procedures for biodiesel production from side-stream refining products such as soapstock, spent bleaching earth and deodorizer distillate were analyzed. The main goal of this paper is to analyze the possibilities for reusing the by-products of edible oil refinement in the biodiesel production.

The Potential of Animal By-Products in Food Systems: Production, Prospects and Challenges

Directory of Open Access Journals (Sweden)

Babatunde O. Alao

2017-06-01

Full Text Available The consumption of animal by-products has continued to witness tremendous growth over the last decade. This is due to its potential to combat protein malnutrition and food insecurity in many countries. Shortly after slaughter, animal by-products are separated into edible or inedible parts. The edible part accounts for 55% of the production while the remaining part is regarded as inedible by-products (IEBPs. These IEBPs can be re-processed into sustainable products for agricultural and industrial uses. The efficient utilization of animal by-products can alleviate the prevailing cost and scarcity of feed materials, which have high competition between animals and humans. This will also aid in reducing environmental pollution in the society. In this regard, proper utilization of animal by-products such as rumen digesta can result in cheaper feed, reduction in competition and lower cost of production. Over the years, the utilization of animal by-products such as rumen digesta as feed in livestock feed has been successfully carried out without any adverse effect on the animals. However, there are emerging gaps that need to be further addressed regarding the food security and sustainability of the products. Therefore, the objective of this review highlights the efficacy and effectiveness of using animal by-products as alternative sources of feed ingredients, and the constraints associated with their production to boost livestock performance in the industry at large.

Product Seeding: Word-of-Mouth Effects For and Beyond the Focal Product

Directory of Open Access Journals (Sweden)

Bart Yakov

2017-11-01

Full Text Available In a classic seeded WOM marketing campaign, a company sends product samples to a selected group of influencers, and encourages them share the product information and their own opinions with other consumers. Positive effects include more WOM for the focal product in the target segment, but also in additional segments. But there are additional spillover effects on the brand and the product category level and they are negative. More conversations about the focal product reduced the “off-topic” conversations about other brands in the same category as well as other products of the same brand. These negative brand and category spillover effects are stronger when the focal product is of a more functional nature. Marketers tend to consider only positive spillovers to be beneficial for a company, but negative spillovers should not be immediately classified as “bad news.” There are upsides to this effect that managers can use in their favor.

Influence of dispatching rules on average production lead time for multi-stage production systems.

Science.gov (United States)

Hübl, Alexander; Jodlbauer, Herbert; Altendorfer, Klaus

2013-08-01

In this paper the influence of different dispatching rules on the average production lead time is investigated. Two theorems based on covariance between processing time and production lead time are formulated and proved theoretically. Theorem 1 links the average production lead time to the "processing time weighted production lead time" for the multi-stage production systems analytically. The influence of different dispatching rules on average lead time, which is well known from simulation and empirical studies, can be proved theoretically in Theorem 2 for a single stage production system. A simulation study is conducted to gain more insight into the influence of dispatching rules on average production lead time in a multi-stage production system. We find that the "processing time weighted average production lead time" for a multi-stage production system is not invariant of the applied dispatching rule and can be used as a dispatching rule independent indicator for single-stage production systems.

Confronting product life thinking with product life cycle analysis

DEFF Research Database (Denmark)

McAloone, Tim C.

2001-01-01

to "read" the environment out of the product, in order to systematically, quickly and efficiently come to some design recommendations for the company. The phrases "LCA" and "product life thinking" will be described and differentiated and a pattern identified for their cooperative effect in use....

Software product quality measurement

OpenAIRE

Godliauskas, Eimantas

2016-01-01

This paper analyses Ruby product quality measures, suggesting three new measures for Ruby product quality measurement tool Rubocop to measure Ruby product quality characteristics defined in ISO 2502n standard series. This paper consists of four main chapters. The first chapter gives a brief view of software product quality and software product quality measurement. The second chapter analyses object oriented quality measures. The third chapter gives a brief view of the most popular Ruby qualit...

Play as production – production as game?

DEFF Research Database (Denmark)

Eichberg, Henning

2015-01-01

Play-related products and their export have through recent decades contributed to a certain Danish image on the world level – with Lego bricks at the commercial end and adventure playgrounds at the pedagogical end. The phenomena of toy production and play exports challenge our understanding of what...... “play” and “game” are, and of their social as well as political significance. At the municipal level, the city of Odense – “city of Hans Christian Andersen” – is branding itself as “city of play”. On the international level, Danish play-related products have expanded on the world market. In the field...... of sport, Danish sport is not just elite sport, but also organized in local associations. People meet in mass summer festivals of popular sport. Folk Academies develop sport as personal development, often in an experimental way. Street sports, parkour, play and games are promoted. Civil society is a basis...

Animal Production Research Advances

African Journals Online (AJOL)

Animal Production Research Advances is a peer-review journal established expressly to promote the production of all animal species utilized as food. The journal has an international scope and is intended for professionals in animal production and related sciences. We solicit contributions from animal production and ...

Accounting for productivity

DEFF Research Database (Denmark)

Aiyar, Shekhar; Dalgaard, Carl-Johan Lars

2009-01-01

The development accounting literature almost always assumes a Cobb-Douglas (CD) production function. However, if in reality the elasticity of substitution between capital and labor deviates substantially from 1, the assumption is invalid, potentially casting doubt on the commonly held view...... that factors of production are relatively unimportant in accounting for differences in labor productivity. We use international data on relative factor shares and capital-output ratios to formulate a number of tests for the validity of the CD assumption. We find that the CD specification performs reasonably...... well for the purposes of cross-country productivity accounting....

Measuring Clinical Productivity.

Science.gov (United States)

Hudson, Mark E; Lebovitz, Evan E

2018-06-01

Productivity measurements have been used to evaluate and compare physicians and physician practices. Anesthesiology is unique in that factors outside anesthesiologist control impact opportunity for revenue generation and make comparisons between providers and facilities challenging. This article uses data from the multicenter University of Pittsburgh Physicians Department of Anesthesiology to demonstrate factors influencing productivity opportunity by surgical facility, between department divisions and subspecialties within multispecialty divisions, and by individuals within divisions. The complexities of benchmarking anesthesiology productivity are demonstrated, and the potential value of creating a productivity profile for facilities and groups is illustrated. Copyright © 2018 Elsevier Inc. All rights reserved.

Smokeless tobacco products harbor diverse bacterial microbiota that differ across products and brands.

Science.gov (United States)

Smyth, Eoghan M; Kulkarni, Prachi; Claye, Emma; Stanfill, Stephen; Tyx, Robert; Maddox, Cynthia; Mongodin, Emmanuel F; Sapkota, Amy R

2017-07-01

Smokeless tobacco products contain numerous chemical compounds, including known human carcinogens. Other smokeless tobacco constituents, including bacteria, may also contribute to adverse health effects among smokeless tobacco users. However, there is a lack of data regarding the microbial constituents of smokeless tobacco. Our goal was to characterize the bacterial microbiota of different smokeless tobacco products and evaluate differences across product types and brands. DNA was extracted from 15 brands of smokeless tobacco products (including dry snuff, moist snuff, snus, and Swedish snus) and 6 handmade products (e.g., toombak) using an enzymatic and mechanical lysis approach. Bacterial community profiling was performed using PCR amplification of the V1-V2 hypervariable region of the 16S rRNA gene, followed by 454 pyrosequencing of the resulting amplicons and sequence analysis using the QIIME package. Total viable counts were also determined to estimate the number of viable bacteria present in each product. Average total viable counts ranged from 0 to 9.35 × 10 7  CFU g -1 . Analysis of the 16S rRNA gene sequences revealed high bacterial diversity across the majority of products tested: dry snuff products where characterized by the highest diversity indices compared to other products. The most dominant bacterial phyla across all products were Firmicutes, Proteobacteria, Actinobacteria, and Bacteroidetes. Significant differences in both bacterial community composition and in silico predicted gene content were observed between smokeless tobacco product types and between brands of specific smokeless tobacco products. These data are useful in order to comprehensively address potential health risks associated with the use of smokeless tobacco products.

Perfusion seed cultures improve biopharmaceutical fed-batch production capacity and product quality.

Science.gov (United States)

Yang, William C; Lu, Jiuyi; Kwiatkowski, Chris; Yuan, Hang; Kshirsagar, Rashmi; Ryll, Thomas; Huang, Yao-Ming

2014-01-01

Volumetric productivity and product quality are two key performance indicators for any biopharmaceutical cell culture process. In this work, we showed proof-of-concept for improving both through the use of alternating tangential flow perfusion seed cultures coupled with high-seed fed-batch production cultures. First, we optimized the perfusion N-1 stage, the seed train bioreactor stage immediately prior to the production bioreactor stage, to minimize the consumption of perfusion media for one CHO cell line and then successfully applied the optimized perfusion process to a different CHO cell line. Exponential growth was observed throughout the N-1 duration, reaching >40 × 10(6) vc/mL at the end of the perfusion N-1 stage. The cultures were subsequently split into high-seed (10 × 10(6) vc/mL) fed-batch production cultures. This strategy significantly shortened the culture duration. The high-seed fed-batch production processes for cell lines A and B reached 5 g/L titer in 12 days, while their respective low-seed processes reached the same titer in 17 days. The shortened production culture duration potentially generates a 30% increase in manufacturing capacity while yielding comparable product quality. When perfusion N-1 and high-seed fed-batch production were applied to cell line C, higher levels of the active protein were obtained, compared to the low-seed process. This, combined with correspondingly lower levels of the inactive species, can enhance the overall process yield for the active species. Using three different CHO cell lines, we showed that perfusion seed cultures can optimize capacity utilization and improve process efficiency by increasing volumetric productivity while maintaining or improving product quality. © 2014 American Institute of Chemical Engineers.

Impact of product configuration systems on product profitability and costing accuracy

DEFF Research Database (Denmark)

Myrodia, Anna; Kristjansdottir, Katrin; Hvam, Lars

2017-01-01

in control of their product assortment, making the right decisions in the sales phase and increasing sales of optimal products. These benefits should have an impact on the company's ability to make more accurate cost estimations in the sales phase, which can positively affect the products’ profitability......This article aims at analyzing the impact of implementing a product configuration system (PCS) on the increased accuracy of the cost calculations and the increased profitability of the products. Companies that have implemented PCSs have achieved substantial benefits in terms of being more...... and after a PCS was implemented. The comparison in the case study revealed that increased accuracy of the cost calculations in the sales phase and consequently increased profitability can be achieved by implementing a PCS....

Device to irradiate agricultural product on the production site, after harvesting

International Nuclear Information System (INIS)

Jegu, Jean; Palomo, Georges; Blaive, Daniel.

1982-01-01

The invention concerns a device to irradiate agricultural product on the production site, after harvesting. It includes an outer shielding to absorb the radiations and containers in which the products are placed for irradiation. The shielding is rotationally symmetrical around a vertical axis and holds an irradiation chamber containing a radioactive bar fitted along the shielding axis. The cylindrical containers are placed around the chamber with their axes parallel to the axis of the shielding. They are set in rotation by a motor and receive the farm products through their top ends which communicate with a supply system. Their bottom ends are closed by shutters covering a means for evacuating the products. The invention applies in particular to the irradiation of newly dug potatoes to avoid germination [fr

Modelling of virtual production networks

Directory of Open Access Journals (Sweden)

2011-03-01

Full Text Available Nowadays many companies, especially small and medium-sized enterprises (SMEs, specialize in a limited field of production. It requires forming virtual production networks of cooperating enterprises to manufacture better, faster and cheaper. Apart from that, some production orders cannot be realized, because there is not a company of sufficient production potential. In this case the virtual production networks of cooperating companies can realize these production orders. These networks have larger production capacity and many different resources. Therefore it can realize many more production orders together than each of them separately. Such organization allows for executing high quality product. The maintenance costs of production capacity and used resources are not so high. In this paper a methodology of rapid prototyping of virtual production networks is proposed. It allows to execute production orders on time considered existing logistic constraints.

Antiproton production

International Nuclear Information System (INIS)

Allaby, J.V.

1984-01-01

The basic definitions used in the physics literature on particle production are reviewed. The data on anti p production are interpreted in order to provide an estimate of the yield of anti p's from typical target at the antiproton accumulator, including the effects of re-absorption in the target. (orig.)

Chlorhexidine in cosmetic products

DEFF Research Database (Denmark)

Opstrup, Morten Schjørring; Johansen, Jeanne Duus; Bossi, Rossana

2015-01-01

or an antimicrobial agent in cosmetic products at a concentration up to 0.3%, as set by the European Cosmetics Directive (now Regulations). OBJECTIVES: To identify cosmetic product types containing chlorhexidine, and to measure the concentration of chlorhexidine in selected products. METHODS: Between February 2013...... and April 2013, we checked for chlorhexidine in cosmetic products in 14 supermarkets, one hairdressing salon and one beauty and retail store in Copenhagen, Denmark by reading the ingredient labels. The chlorhexidine concentration was measured in 10 selected products by high-performance liquid chromatography...... concentrations were 0.01-0.15%. CONCLUSIONS: We found chlorhexidine in various cosmetic product types, predominantly aimed at females, and in hair products. The measured chlorhexidine concentrations were all within the permitted limit. The relevance for allergic sensitization should be further explored....

Impact of product platforms on lean production systems : evidence from industrial machinery manufacturing

NARCIS (Netherlands)

Alblas, A.A.; Wortmann, J.C.

2012-01-01

The present study describes the effects of product platform changes on lean production systems. Current research into product platforms focuses mostly on the development stage. However, although the initial development of platforms is an important issue, product platforms often evolve during later

Alignment of Product Models and Product State Models - Integration of the Product Lifecycle Phases

DEFF Research Database (Denmark)

Larsen, Michael Holm; Kirkby, Lars Phillip; Vesterager, Johan

1999-01-01

The purpose of this paper is to discuss the integration of the Product Model (PM) and the Product State Model (PCM). Focus is on information exchange from the PSM to the PM within the manufacturing of a single ship. The paper distinguishes between information and knowledge integration. The paper ...... provides some overall strategies for integrating PM and PSM. The context of this discussion is a development project at Odense Steel Shipyard....

From Sentence Production to Text Production: Investigating Fundamental Processes.

Science.gov (United States)

Fayol, Michel

1991-01-01

Presents a review of cognitive psychology research dealing with the organization and functioning of oral and written language production mechanisms. Discusses works dealing with the microstructural aspects of language, primarily oral production. Describes how the research perspective has evolved from modular to connectionist models. Examines the…

Production and Productivity Effects of Informal Contract Farming in ...

African Journals Online (AJOL)

This paper uses data from a 2001 household survey of small-scale farming households in Kirinyaga District, Kenya to explore production effects of informal credit contracts in French bean farming where formal markets for surplus production are seemingly shallow and imperfect. Specifically, it examines whether informal ...

Product sounds : Fundamentals and application

NARCIS (Netherlands)

Ozcan-Vieira, E.

2008-01-01

Products are ubiquitous, so are the sounds emitted by products. Product sounds influence our reasoning, emotional state, purchase decisions, preference, and expectations regarding the product and the product's performance. Thus, auditory experience elicited by product sounds may not be just about

75 FR 33814 - Tobacco Product Constituents Subcommittee of the Tobacco Products Scientific Advisory Committee...

Science.gov (United States)

2010-06-15

...] Tobacco Product Constituents Subcommittee of the Tobacco Products Scientific Advisory Committee; Notice of... to the public. Name of Committee: Tobacco Product Constituents Subcommittee of the Tobacco Products...-8900. Contact Person: Karen Templeton-Somers, Office of Science, Center for Tobacco Products, Food and...

K-shell-hole production, multiple-hole production, charge transfer, and antisymmetry

International Nuclear Information System (INIS)

Reading, J.F.; Ford, A.L.

1980-01-01

In calculating K-shell-hole production when an ion collides with an atom, account must be taken of the fact that processes involving electrons other than the K-shell electron can occur. For example, after making a K-shell hole an L-shell electron may be knocked into it, or an L-shell vacancy may be produced and the K-shell electron promoted to that vacancy in the ''Fermi sea'' of the target-atom orbitals. In 1973 a theorem was proved by one of the present authors demonstrating that all these multielectron processes cancel in an independent-particle model for the target atom. In this paper it is shown that the same thing occurs for hole production by charge transfer to the ion. The authors demonstrate that multihole production does not obey this simple rule and that the probability for multihole production is not the product of independent single-electron probabilities. The correct expressions that should be used for these processes are given, together with new results for charge-transfer processes accompanied by hole production

Determination of impurities and degradation products from veterinary medicinal products by HPLC method

Directory of Open Access Journals (Sweden)

Elena Gabriela Oltean

2014-06-01

Full Text Available The organic or inorganic impurities in the veterinary medicinal product can derive from starting materials, manufacturing process, incomplete purification, inappropriate storage. The acceptable levels of impurities in pharmaceuticals are estimated by comparison with standard solutions, according to the appropriate monographs. Forced degradation studies determine the stability of the method of dosage for the active compounds and for the entire finished product under excessive accelerated degradation conditions. They also provide information on degradation pathways and selectivity of analytical methods applied. The information provided by the degradation studies on the active compound and finished pharmaceutical product should demonstrate the specificity of the analytical method regarding impurities. Forced degradation studies should demonstrate that the impurities and degradation products generated do not interfere with the active compound. The current forced degradation methods consist of acid hydrolysis, basic hydrolysis, oxidation, exposure of the medicinal product to temperature and light. HPLC methods are an integral analytical instrument for the analysis of the medicinal product. The HPLC method should be able to separate, detect and quantify various specific degradation products that can appear after manufacture or storage of the medicinal product, as well as new elements appearing after synthesis. FDA and ICH guidelines recommend the enclosure of the results, including the chromatograms specific to the forced degradation-subjected medicinal product, in the documentation for marketing authorization. Using HPLC methods in forced degradation studies on medicinal products provides relevant information on the method of determination for the formulation of the medicinal product, synthesis product, packaging methods and storage.

Design, production and materials of PV powered consumer products - the case of mass production (cd-rom)

NARCIS (Netherlands)

Reinders, Angelina H.M.E.; Akkerman, Remko; Palz, W.; Ossenbrink, H.; Helm, P.

2005-01-01

Though many options exist, the application of integrated PV systems in mass produced consumer products is still unusual and rare [1]. Therefore, to date, design and manufacturing aspects of product-integrated PV systems have been explored only to a very limited extent. The requirements for the

The productivity and work load in flexible production systems

NARCIS (Netherlands)

Rhijn, J.W. van; Looze, M.P. de; Schoenmaker, N.; Bosch, T.; Deursen, J. van

2006-01-01

A negative aspect of serial flow production systems is its lack of flexibility. Other production systems like the flexing flow and the shopping system are more flexible as the number of workers can be easily adjusted to temporal demands. But how efficient are these flexible systems? In a laboratory

Interface between the production plan and the master production schedule in assembly environments

OpenAIRE

Moya Navarro, Marcos; Sánchez Brenes, Magaly

2012-01-01

In a production environment there is a direct relationship between the market and the manufacturing process of goods.When production is immersed in an assembly environment, the process of production planning and scheduling becomes complex, and the enterprises have the risk of losing competitive advantages in terms of not meeting delivery dates and production high costs. Linear programming has become an appropriate tool for production planning and scheduling in complex manufacturing environmen...

9 CFR 319.761 - Potted meat food product and deviled meat food product.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Potted meat food product and deviled meat food product. 319.761 Section 319.761 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY...

Multi-Product Crops for Agricultural and Energy Production : an AGE Analysis for Poland

NARCIS (Netherlands)

Ignaciuk, A.; Dellink, R.B.

2005-01-01

By-products from agriculture and forestry can contribute to production of clean and cheap (bio)electricity. To assess the role of such multi-product crops in the response to climate policies, we present an applied general equilibrium model with special attention to biomass and multi-product crops

Seeds of Cross-Media Production

DEFF Research Database (Denmark)

Bødker, Susanne; Petersen, Anja Bechmann

2007-01-01

separately and of cross-media production. Since cross-media production is in the making, we study the instruments currently used for planning and coordination, and analyze them as seeds that will eventually make cross-media production happen. Time and timing are important in news production in general......We present an empirical study of an organization that has recently moved from traditional newspaper production towards cross-media production involving the integrated digital production of newspaper, television, radio and web-news. The paper focuses on the daily production rhythms of the media...... with planning and coordination. We demonstrate how the production rhythms of the individual media collide with that of cross-media, and how product lifecycle rhythms add to the list of causes of problems that may jeopardize crossmedia production. We propose to strengthen planning and overview support elements...

Volatile products controlling Titan's tholins production

KAUST Repository

Carrasco, Nathalie

2012-05-01

A quantitative agreement between nitrile relative abundances and Titan\\'s atmospheric composition was recently shown with a reactor simulating the global chemistry occurring in Titan\\'s atmosphere (Gautier et al. [2011]. Icarus, 213, 625-635). Here we present a complementary study on the same reactor using an in situ diagnostic of the gas phase composition. Various initial N 2/CH 4 gas mixtures (methane varying from 1% to 10%) are studied, with a monitoring of the methane consumption and of the stable gas neutrals by in situ mass spectrometry. Atomic hydrogen is also measured by optical emission spectroscopy. A positive correlation is found between atomic hydrogen abundance and the inhibition function for aerosol production. This confirms the suspected role of hydrogen as an inhibitor of heterogeneous organic growth processes, as found in Sciamma-O\\'Brien et al. (Sciamma-O\\'Brien et al. [2010]. Icarus, 209, 704-714). The study of the gas phase organic products is focussed on its evolution with the initial methane amount [CH 4] 0 and its comparison with the aerosol production efficiency. We identify a change in the stationary gas phase composition for intermediate methane amounts: below [CH 4] 0=5%, the gas phase composition is mainly dominated by nitrogen-containing species, whereas hydrocarbons are massively produced for [CH 4] 0>5%. This predominance of N-containing species at lower initial methane amount, compared with the maximum gas-to solid conversion observed in Sciamma-O\\'Brien et al. (2010) for identical methane amounts confirms the central role played by N-containing gas-phase compounds to produce tholins. Moreover, two protonated imines (methanimine CH 2NH and ethanamine CH 3CHNH) are detected in the ion composition in agreement with Titan\\'s INMS measurements, and reinforcing the suspected role of these chemical species on aerosol production. © 2012 Elsevier Inc.

Product Placement in Cartoons

Directory of Open Access Journals (Sweden)

Irena Oroz Štancl

2014-06-01

Full Text Available Product placement is a marketing approach for integrating products or services into selected media content. Studies have shown that the impact of advertising on children and youth are large, and that it can affect their preferences and attitudes. The aim of this article is to determine the existing level of product placement in cartoons that are broadcast on Croatian television stations. Content analysis of cartoons in a period of one month gave the following results: in 30% of cartoons product placement was found; most product placement were visual ads, in 89%, however, auditory product placement and plot connection was also found. Most ads were related to toys and it is significant that even 65% of cartoons are accompanied by a large amount of products available on the Croatian market. This is the result of two sales strategies: brand licensing (selling popular cartoon characters to toys, food or clothing companies and cartoon production based on existing line of toys with the sole aim of making their sales more effective.

Productivity and energy efficiency

Energy Technology Data Exchange (ETDEWEB)

Lovins, H. [Rocky Mountain Inst., Snowmass, CO (United States)

1995-12-31

Energy efficient building and office design offers the possibility of significantly increased worker productivity. By improving lighting, heating and cooling, workers can be made more comfortable and productive. An increase of 1 percent in productivity can provide savings to a company that exceed its entire energy bill. Efficient design practices are cost effective just from their energy savings. The resulting productivity gains make them indispensable. This paper documents eight cases in which efficient lighting, heating, and cooling have measurably increased worker productivity, decreased absenteeism, and/or improved the quality of work performed. They also show that efficient lighting can measurably increase work quality by removing errors and manufacturing defects. The case studies presented include retrofit of existing buildings and the design of new facilities, and cover a variety of commercial and industrial settings. Each case study identifies the design changes that were most responsible for increased productivity. As the eight case studies illustrate, energy efficient design may be one of the least expensive ways for a business to improve the productivity of its workers and the quality of its product. (author). 15 refs.

Opportunities, perspectives and limits in lactic acid production from waste and industrial by-products

Directory of Open Access Journals (Sweden)

Mladenović Dragana D.

2016-01-01

Full Text Available In line with the goals of sustainable development and environmental protection today great attention is directed towards new technologies for waste and industrial by-products utilization. Waste products represent potentially good raw material for production other valuable products, such as bioethanol, biogas, biodiesel, organic acids, enzymes, microbial biomass, etc. Since the first industrial production to the present, lactic acid has found wide application in food, cosmetic, pharmaceutical and chemical industries. In recent years, the demand for lactic acid has been increasing considerably owing to its potential use as a monomer for the production of poly-lactic acid (PLA polymers which are biodegradable and biocompatible with wide applications. Waste and industrial by-products such are whey, molasses, stillage, waste starch and lignocellulosic materials are a good source of fermentable sugars and many other substances of great importance for the growth of microorganisms, such as proteins, minerals and vitamins. Utilization of waste products for production of lactic acid could help to reduce the total cost of lactic acid production and except the economic viability of the process offers a solution of their disposal. Fermentation process depends on chemical and physical nature of feedstocks and the lactic acid producer. This review describes the characteristics, abilities and limits of microorganisms involved in lactic acid production, as well as the characteristics and types of waste products for lactic acid production. The fermentation methods that have been recently reported to improve lactic acid production are summarized and compared. In order to improve processes and productivity, fed-batch fermentation, fermentation with immobilized cell systems and mixed cultures and opportunities of open (non-sterilized fermentation have been investigated.

Sustainable production of wood and non-wood forest products

Science.gov (United States)

Ellen M. Donoghue; Gary L. Benson; James L. Chamberlain

2003-01-01

The International Union of Forest Research Organizations (IUFRO) All Divisions 5 Conference in Rotorua, New Zealand, March 11-15, 2003, focused on issues surrounding sustainable foest management and forest products research. As the conference title "Forest Products Research: Providing for Sustainable Choices" suggests, the purpose of the conference was to...

Evolving production network structures

DEFF Research Database (Denmark)

Grunow, Martin; Gunther, H.O.; Burdenik, H.

2007-01-01

When deciding about future production network configurations, the current structures have to be taken into account. Further, core issues such as the maturity of the products and the capacity requirements for test runs and ramp-ups must be incorporated. Our approach is based on optimization...... modelling and assigns products and capacity expansions to production sites under the above constraints. It also considers the production complexity at the individual sites and the flexibility of the network. Our implementation results for a large manufacturing network reveal substantial possible cost...

Possibilities of utilization of co-products from corn grain ethanol and starch production

Directory of Open Access Journals (Sweden)

Semenčenko Valentina V.

2013-01-01

Full Text Available In recent decades, the expansion of alternative fuels production from crops traditionally used for food and animal feed has led to significant changes in the field of energy production, agriculture and food industry. Starch and sugar feedstocks for ethanol production (corn, wheat, sugar beet, sugar cane, etc. require increasing arable land to meet market demands for the biofuel production. Although intensive studies are being carried out in order to identify improved and more cost-effective methods for the utilization of lignocellulosic and communal waste in the production of alcohol fuel, the possibility of using dry distillers’ grains with solubles (DDGS, by-product of bioethanol production from corn and wheat as well as alcoholic beverages industry, is now in focus. Application of DDGS in livestock and poultry diets in concentrations greater than traditional could positively affect the economic viability of this biofuel production, but also stabilize the current imbalance in the food and animal feed market. However, DDGS feedstuff should not be treated as a perfect substitute for corn because the complexity of ration formulation determined at the farm or feedlot level is driven by energy and protein and other nutrient requirements, as well as their relative costs in the ration. Nevertheless, processing of corn by wet milling provides a multitude of co-products suitable for feedstuffs, food industry, pharmaceuticals, chemistry etc. Some of the most important wet milling co-products that have their use in feedstuffs are corn gluten feed and corn gluten meal. The use of DDGS as a substitute for traditional feed could prevent indirect land-use changes associated with biofuel production, and therefore preserve the environmental destruction by saving the forests and permanent pastures. The use of distiller’s grains can be beneficial to biofuel growth as this is an additional, the second largest, source of income accounting of 10-20% total

25 CFR 309.6 - When does a commercial product become an Indian product?

Science.gov (United States)

2010-04-01

...? 309.6 Section 309.6 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.6 When does a commercial product become an Indian product? In addressing Indian embellishments to originally commercial products, the Indian labor expended to add art or...

Fermentative production of isobutene.

Science.gov (United States)

van Leeuwen, Bianca N M; van der Wulp, Albertus M; Duijnstee, Isabelle; van Maris, Antonius J A; Straathof, Adrie J J

2012-02-01

Isobutene (2-methylpropene) is one of those chemicals for which bio-based production might replace the petrochemical production in the future. Currently, more than 10 million metric tons of isobutene are produced on a yearly basis. Even though bio-based production might also be achieved through chemocatalytic or thermochemical methods, this review focuses on fermentative routes from sugars. Although biological isobutene formation is known since the 1970s, extensive metabolic engineering is required to achieve economically viable yields and productivities. Two recent metabolic engineering developments may enable anaerobic production close to the theoretical stoichiometry of 1isobutene + 2CO(2) + 2H(2)O per mol of glucose. One relies on the conversion of 3-hydroxyisovalerate to isobutene as a side activity of mevalonate diphosphate decarboxylase and the other on isobutanol dehydration as a side activity of engineered oleate hydratase. The latter resembles the fermentative production of isobutanol followed by isobutanol recovery and chemocatalytic dehydration. The advantage of a completely biological route is that not isobutanol, but instead gaseous isobutene is recovered from the fermenter together with CO(2). The low aqueous solubility of isobutene might also minimize product toxicity to the microorganisms. Although developments are at their infancy, the potential of a large scale fermentative isobutene production process is assessed. The production costs estimate is 0.9 Euro kg(-1), which is reasonably competitive. About 70% of the production costs will be due to the costs of lignocellulose hydrolysate, which seems to be a preferred feedstock.

Product Configuration Systems and Productivity

DEFF Research Database (Denmark)

Pedersen, Jørgen Lindgaard; Edwards, Kasper

2004-01-01

Twelve companies have been interviewed with the purpose to get information about technical, economic and organisational matters in respect of Product Configuration Systems (PCS).Combinations of qualitative interviews and quantitative scoring have been used in ranking expected and realized results...

Product prioritization in a two-stage food production system with intermediate storage

NARCIS (Netherlands)

Akkerman, R.; van Donk, D.P.

In the food-processing industry, usually a limited number of storage tanks for intermediate storage is available, which are used for different products. The market sometimes requires extremely short lead times for some products, leading to prioritization of these products, partly through the

Modernity Evaluation of the Machines Used During Production Process of Metal Products

OpenAIRE

Ingaldi, Manuela; Dziuba, Szymon T.

2015-01-01

Most manufacturing companies realize its technologies, implemented through concrete machinery parts. They differ in terms of importance, the relevance of their selection and the level of their modernity. Modernity and efficiency of the machine are also very important during production process of the metal products. They have an influence on the quality of these products. The purpose of this article is to analyse the chosen production machine (CNC machine AFE-3D8-T) used during pro...

Product Structuring, an overview

DEFF Research Database (Denmark)

Tichem, Marcel; Storm, Ton; Andreasen, Mogens Myrup

1997-01-01

.In the paper, the field of product structuring is defined and broken down into topics. For each of the topics, results of research are presented. Issues for further research are identified. The references in the paper refer to papers in the proceedings of the workshops.......This paper presents the highlights of two WDK Workshops on Product Structuring. Product structuring plays an important role in creating products which have good functional and life-cycle related properties, in design process management, and in several other company functions like production control...

The impact of new product introduction on plant productivity in the North American automotive industry

NARCIS (Netherlands)

Gopal, A.; Goyal, M.; Netessine, S.; Reindorp, M.J.

2013-01-01

Product launch—an event when a new product debuts for production in a plant—is an important phase in product development. But launches disrupt manufacturing operations, resulting in productivity losses. Using data from North American automotive plants from years 1999–2007, we estimate that a product

Technical efficiency in milk production in underdeveloped production environment of India*.

Science.gov (United States)

Bardhan, Dwaipayan; Sharma, Murari Lal

2013-12-01

The study was undertaken in Kumaon division of Uttarakhand state of India with the objective of estimating technical efficiency in milk production across different herd-size category households and factors influencing it. Total of 60 farm households having representation from different herd-size categories drawn from six randomly selected villages of plain and hilly regions of the division constituted the ultimate sampling units of the study. Stochastic frontier production function analysis was used to estimate the technical efficiency in milk production. Multivariate regression equations were fitted taking technical efficiency index as the regressand to identify the factors significantly influencing technical efficiency in milk production. The study revealed that variation in output across farms in the study area was due to difference in their technical efficiency levels. However, it was interesting to note that smallholder producers were more technically efficient in milk production than their larger counterparts, especially in the plains. Apart from herd size, intensity of market participation had significant and positive impact on technical efficiency in the plains. This provides definite indication that increasing the level of commercialization of dairy farms would have beneficial impact on their production efficiency.

Heuristics for the Economic Production Quantity Problem under Restrictions on Production and Maintenance Time

Directory of Open Access Journals (Sweden)

Qi Xu

2016-01-01

Full Text Available This paper proposes an economic production quantity problem with the maximal production run time and minimal preventive maintenance time over a finite planning horizon. The objective is to find the efficient production and maintenance policy to minimize the total cost composed of production, maintenance, shortages, and holding costs under the restriction on the production run time and the preventive maintenance time. The production and maintenance decisions include the production and maintenance frequencies and the production run and the maintenance time. The variability and the boundedness of the production run and maintenance time make the problem difficult to solve. Two heuristic algorithms are developed using different techniques based on the optimal properties of the relaxed problem. The performance comparison between the two algorithms is illustrated by numerical examples. The numerical results show that, for the most part, there exists a heuristic algorithm which is more effective than the other.

Advances in chemical product design

DEFF Research Database (Denmark)

Zhang, Lei; Fung, Ka Yip; Wibowo, Christianto

2018-01-01

The nature of chemical product design problems is diverse and multidisciplinary. It involves many design issues such as project management, market study, product design, process design, and economic analysis for better organizing the product design project and achieving better products. This arti......The nature of chemical product design problems is diverse and multidisciplinary. It involves many design issues such as project management, market study, product design, process design, and economic analysis for better organizing the product design project and achieving better products....... This article provides an overview of chemical product design with a multidisciplinary hierarchical framework including all the design issues and tasks. Each of the design issues and tasks are introduced and discussed, methods and tools are summarized and compared, challenges and perspectives are presented...... to help the chemical product design researchers on finding more novel, innovative and sustainable products, by the combined effort from academia and industry to develop a systematic generic framework, and tools including product simulator, process simulator, database manager, modeling tool, and templates...

Microbiological Spoilage of Cereal Products

Science.gov (United States)

Cook, Frederick K.; Johnson, Billie L.

A wide range of cereal products, including bakery items, refrigerated dough, fresh pasta products, dried cereal products, snack foods, and bakery mixes, are manufactured for food consumption. These products are subject to physical, chemical, and microbiological spoilage that affects the taste, aroma, leavening, appearance, and overall quality of the end consumer product. Microorganisms are ubiquitous in nature and have the potential for causing food spoilage and foodborne disease. However, compared to other categories of food products, bakery products rarely cause food poisoning. The heat that is applied during baking or frying usually eliminates pathogenic and spoilage microorganisms, and low moisture contributes to product stability. Nevertheless, microbiological spoilage of these products occurs, resulting in substantial economic losses.

Strategies of Production Control as Tools of Efficient Management of Production Enterprises

Science.gov (United States)

Budynek, Mateusz; Celińska, Elżbieta; Dybikowska, Adrianna; Kozak, Monika; Ratajczak, Joanna; Urban, Jagoda; Materne, Karolina

2016-03-01

The paper discusses the problem of principle methods of production control as a strategy supporting the production system and stimulating efficient solutions in respect management in production enterprises. The article describes MRP, ERP, JIT, KANBAN and TOC methods and focuses on their main goals, principles of functioning as well as benefits resulting from their application. The methods represent two diverse strategies of production control, i.e. pull and push strategies. Push strategies are used when the plans apply to the first and principle part of production and are based on the demand forecasts. Pull strategies are used when all planning decisions apply to the final stage and depend on the actual demand or orders from customers.

National pulpwood production, 2010

Science.gov (United States)

Ronald J. Piva; James W. Bentley; Steven W. Hayes

2014-01-01

U.S. pulpwood production amounted to 86.5 million cords in 2010, a decrease of 4 percent from 2008. Roundwood production totaled 65.7 million cords and accounted for 76 percent of the Nation's total pulpwood production. The Southern Region led the Nation in total production with 65.5 million cords, followed by the Northern Region with 12.8 million cords, and the...

Consumer Product Category Database

Science.gov (United States)

The Chemical and Product Categories database (CPCat) catalogs the use of over 40,000 chemicals and their presence in different consumer products. The chemical use information is compiled from multiple sources while product information is gathered from publicly available Material Safety Data Sheets (MSDS). EPA researchers are evaluating the possibility of expanding the database with additional product and use information.

Product Quality and Worker Quality

OpenAIRE

Abowd, John M; Kramarz, Francis

1995-01-01

We study the relation between product quality and worker quality using an economic model that, under certain conditions, provides a direct link between product price, product quality and work-force quality. Our measures of product quality are the evolution in the detailed product price relative to its product group, and the level of the product price relative to this group. Our worker quality measures are the firm's average person effect and personal characteristics effect from individual wag...

Product Quality and Worker Quality

OpenAIRE

John M. ABOWD; Françis KRAMARZ; Antoine MOREAU

1996-01-01

We study the relation between product quality and worker quality using an economic model that, under certain conditions, provides a direct link between product price, product quality and work force quality. Our measures of product quality are the evolution in the detailed product price relative to its product group and the level of the product price relative to this group. Our worker quality measures are the firm's average person effect and personal characteristics effect from individual wage...

Design of resilient consumer products

DEFF Research Database (Denmark)

Haug, Anders

2016-01-01

Consumer product sustainability is a topic that has been of increasing interest to practice and academia in recent decades. In this context, a widely discussed means of achieving sustainability is to design more durable products, thereby reducing the need for the production of new products....... In particular, the emotional perspective on product durability has received attention in recent design literature, since consumer products are often replaced long before they become physically non-functioning. However, the literature does not provide a full account of the causes of product replacement...... for designers to design resilient consumer products and for researchers to engage in further studies....

Low income product innovation

Directory of Open Access Journals (Sweden)

Maria Cecília Sobral

2008-10-01

Full Text Available At affluent markets, the literature on product development management tells us to aggregate value and technology, to differentiate products and to launch fast. And at the low-income markets? This exploratory research defines a popular product, characterizes and measures their markets in Brazil, and identifies innovation strategies for them. The results suggest that the effective strategic orientation differs from affluent markets. It includes: to enhance the auto service component; to identify and service the key functionalities to the targeted public; to standardize products and increase the production scale; to extend the product life cycle; to use convenient distribution and marketing channels; to build product images that have appeal in the popular market; to offer longer financing horizons with befittingly lower installments. Data came from market researches and general demographic census. General media published stories were used to identify companies and their strategies. And a few case studies allowed the authors a deeper exploration of the relevant themes.

Production of Fungal Glucoamylase for Glucose Production from Food Waste

Directory of Open Access Journals (Sweden)

Carol Sze Ki Lin

2013-09-01

Full Text Available The feasibility of using pastry waste as resource for glucoamylase (GA production via solid state fermentation (SSF was studied. The crude GA extract obtained was used for glucose production from mixed food waste. Our results showed that pastry waste could be used as a sole substrate for GA production. A maximal GA activity of 76.1 ± 6.1 U/mL was obtained at Day 10. The optimal pH and reaction temperature for the crude GA extract for hydrolysis were pH 5.5 and 55 °C, respectively. Under this condition, the half-life of the GA extract was 315.0 minutes with a deactivation constant (kd 2.20 × 10−3minutes−1. The application of the crude GA extract for mixed food waste hydrolysis and glucose production was successfully demonstrated. Approximately 53 g glucose was recovered from 100 g of mixed food waste in 1 h under the optimal digestion conditions, highlighting the potential of this approach as an alternative strategy for waste management and sustainable production of glucose applicable as carbon source in many biotechnological processes.

Production of Fungal Glucoamylase for Glucose Production from Food Waste

Science.gov (United States)

Lam, Wan Chi; Pleissner, Daniel; Lin, Carol Sze Ki

2013-01-01

The feasibility of using pastry waste as resource for glucoamylase (GA) production via solid state fermentation (SSF) was studied. The crude GA extract obtained was used for glucose production from mixed food waste. Our results showed that pastry waste could be used as a sole substrate for GA production. A maximal GA activity of 76.1 ± 6.1 U/mL was obtained at Day 10. The optimal pH and reaction temperature for the crude GA extract for hydrolysis were pH 5.5 and 55 °C, respectively. Under this condition, the half-life of the GA extract was 315.0 minutes with a deactivation constant (kd) 2.20 × 10−3 minutes−1. The application of the crude GA extract for mixed food waste hydrolysis and glucose production was successfully demonstrated. Approximately 53 g glucose was recovered from 100 g of mixed food waste in 1 h under the optimal digestion conditions, highlighting the potential of this approach as an alternative strategy for waste management and sustainable production of glucose applicable as carbon source in many biotechnological processes. PMID:24970186

User's guide: Nimbus-7 Earth radiation budget narrow-field-of-view products. Scene radiance tape products, sorting into angular bins products, and maximum likelihood cloud estimation products

Science.gov (United States)

Kyle, H. Lee; Hucek, Richard R.; Groveman, Brian; Frey, Richard

1990-01-01

The archived Earth radiation budget (ERB) products produced from the Nimbus-7 ERB narrow field-of-view scanner are described. The principal products are broadband outgoing longwave radiation (4.5 to 50 microns), reflected solar radiation (0.2 to 4.8 microns), and the net radiation. Daily and monthly averages are presented on a fixed global equal area (500 sq km), grid for the period May 1979 to May 1980. Two independent algorithms are used to estimate the outgoing fluxes from the observed radiances. The algorithms are described and the results compared. The products are divided into three subsets: the Scene Radiance Tapes (SRT) contain the calibrated radiances; the Sorting into Angular Bins (SAB) tape contains the SAB produced shortwave, longwave, and net radiation products; and the Maximum Likelihood Cloud Estimation (MLCE) tapes contain the MLCE products. The tape formats are described in detail.

Can Differentiated Production Planning and Control enable both Responsiveness and Efficiency in Food Production?

Directory of Open Access Journals (Sweden)

Anita Romsdal

2014-07-01

Full Text Available This paper addresses the complex production planning and control (PPC challenges in food supply chains. The study illustrates how food producers' traditional make‐to‐stock (MTS approach is not well suited to meet the trends of increasing product variety, higher demand uncertainty, increasing sales of fresh food products and more demanding customers. The paper proposes a framework for differentiated PPC that combines MTS with make‐to‐order (MTO.The framework matches products with the most appropriate PPC approaches and buffering techniques depending on market and product characteristics. The core idea is to achieve more volume flexibility in the production system by exploiting favourable product and market characteristics (high demand predictability, long customer order leadtime allowances and low product perishability. A case study is used to demonstrate how the framework can enable food producers to achieve efficiency in production, inventory and PPC processes – and simultaneously be responsive to market requirements.

Cianobacterias en diferentes estadíos fenológicos del cultivo de arroz en Entre Ríos (Argentina Cyanobacteria in differents phenology stages of rice cropp in Entre Ríos (Argentina

Directory of Open Access Journals (Sweden)

Cecilia Isabel Sánchez

2011-12-01

and media comparison tests were perfomed to establish differences at tillering, booting and physiological maturity stages. The identification was conducted by morphological characteristics, dividing them them by unicellular, heterocystous filamentous and non-heterocystous filamentous groups. Richness and Simpson's Reciprocal Indexes were calculated. Count distribution patterns in water were similar in both years. The lowest counts were registered at the tillering stageshowing significant differences between the first and second year. The maximum counts were observed at the booting stage in both years (3,6x10(4 and 4,0x10(4 cells mL-1 respectively. In the soil, the population exhibited a different evolution in the two years of analysis and was significantly different in booting and tillering. In the first year, 11 genera were registered, while 10 genera were registered in the second year. The genera Lyngbya, Oscillatoria, Anabaena, Nostoc, Aphanocapsa, Chroococcus, and Gloeocapsa were observed in both years. Nostoc and Anabaena were present in most of the samplings. The unicellular cyanobacteria Aphanocapsa, Chroococcus and Gloeocapsa were dominant in the soil. Simpson's Reciprocal Index increased along the cycle of rice in the second year of evaluation. Richness increased at the booting stage due to a better adaptation to the environmental conditions. The proportion of heterocystous filamentous in water was different during both years of study (50% and 26% for the first and second year.

Joint production and corporate pricing: An empirical analysis of joint products in the petroleum industry

International Nuclear Information System (INIS)

Karimnejad, H.

1990-01-01

This dissertation investigates the pricing mechanism of joint products in large multi-plant and multi-product corporations. The primary objective of this dissertation is to show the consistency of classical theories of production with corporate pricing of joint products. This dissertation has two major parts. Part One provides a theoretical framework for joint production and corporate pricing. In this part, joint production is defined and its historical treatment by classical and contemporary economists is analyzed. Part Two conducts an empirical analysis of joint products in the US petroleum industry. Methods of cost allocation are used in the pricing of each individual petroleum product. Three methods are employed to distribute joint production costs to individual petroleum products. These methods are, the sales value method, the barrel gravity method and the average unit cost method. The empirical findings of dissertation provide useful guidelines for pricing policies of large multi-product corporations

Improvement of succinate production by release of end-product inhibition in Corynebacterium glutamicum.

Science.gov (United States)

Chung, Soon-Chun; Park, Joon-Song; Yun, Jiae; Park, Jin Hwan

2017-03-01

Succinate is a renewable-based platform chemical that may be used to produce a wide range of chemicals including 1,4-butanediol, tetrahydrofurane, and γ-butyrolactone. However, industrial fermentation of organic acids is often subject to end-product inhibition, which significantly retards cell growth and limits metabolic activities and final productivity. In this study, we report the development of metabolically engineered Corynebacterium glutamicum for high production of succinate by release of end-product inhibition coupled with an increase of key metabolic flux. It was found that the rates of glucose consumption and succinate production were significantly reduced by extracellular succinate in an engineered strain, S003. To understand the mechanism underlying the inhibition by succinate, comparative transcriptome analysis was performed. Among the downregulated genes, overexpression of the NCgl0275 gene was found to suppress the inhibition of glucose consumption and succinate production, resulting in a 37.7% increase in succinate production up to 55.4g/L in fed-batch fermentation. Further improvement was achieved by increasing the metabolic flux from PEP to OAA. The final engineered strain was able to produce 152.2g/L succinate, the highest production reported to date, with a yield of 1.1g/g glucose under anaerobic condition. These results suggest that the release of end-product inhibition coupled with an increase in key metabolic flux is a promising strategy for enhancing production of succinate. Copyright © 2017. Published by Elsevier Inc.

RELEVANT DIRECTIONS FOR THE PRODUCTION OF COMPETITIVE CONSTRUCTION PRODUCTS ON THE BASIS OF INNOVATION

Directory of Open Access Journals (Sweden)

T. Yu. Levitskiy

2017-01-01

Full Text Available Objectives. The article substantiates the necessity for competitive innovative high-tech construction products at the present stage of modernisation of the construction industry and reveals some peculiarities of their manufacture.Methods. In the course of the research, a programme-targeted method was applied, underlying the development of a programme for the innovative development of construction production.Results. Relevant directions of innovative development of construction production are systematised. The world's application experience of a technical regulation parametric model for construction industry product manufacturing is generalised. In order to increase the level of innovative activity of construction organisations, a set of practical measures is proposed whose implementation will ensure the output of competitive building products to the market.Conclusion. Increasing the competitiveness of construction products is closely connected with the activation of innovative processes: the introduction of high technology (including resource-saving into production processes and the expansion of the output of innovative products with the best consumer properties capable of successfully competing on the market with foreign counterparts in the context of import substitution strategies. The modernisation of the construction industry on the basis of introduction of hightech production methods specifies new requirements to the professional competencies of personnel producing competitive building products. To solve the set problems, a tool for improving the management mechanism of the innovative activity of construction organisations was proposed, ensuring the integration of institutional and production conditions for the large-scale development of advanced technologies and production of science-intensive types of construction products. 

Production of RVNRL and manufacture of products from it

International Nuclear Information System (INIS)

Vijayakumar, K.C.; Jacob, J.

1996-01-01

The procedure of the trial irradiation of latex at the pilot plant are discussed. Factory influencing the quality of RVNRL during trial production are identified. Procedure for processing of radiation prevulcanised latex into end products has been standardised. Household gloves, industrial gloves, to), balloons, blood transfusion tubes and nipples are manufactured commercially from RVNRL produced at Rubber Board

A simple approximation of productivity scores of fuzzy production plans

DEFF Research Database (Denmark)

Hougaard, Jens Leth

2005-01-01

This paper suggests a simple approximation procedure for the assessment of productivity scores with respect to fuzzy production plans. The procedure has a clear economic interpretation and all the necessary calculations can be performed in a spreadsheet making it highly operational...

Evolving Product Information in Aligning Product Development Decisions across Disciplines

NARCIS (Netherlands)

Oude Luttikhuis, Ellen; de Lange, Jos; Lutters, Diederick; ten Klooster, Roland

2015-01-01

Today's product development is fragmented across various disciplines all with their own fields of expertise. Maintaining overview in consequences and implications of decisions is difficult, since many stakeholders are involved. To optimise the product development, many methods are developed based on

Glutamic acid production from wheat by-products using enzymatic and acid hydrolysis

NARCIS (Netherlands)

Sari, Y.W.; Alting, A.C.; Floris, R.; Sanders, J.P.M.; Bruins, M.E.

2014-01-01

Glutamic acid (Glu) has potential as feedstock for bulk chemicals production. It has also been listed as one of the top twelve chemicals derived from biomass. Large amounts of cheaper Glu can be made available by enabling its production from biomass by-products, such as wheat dried distillers grains

STRATEGIES OF PRODUCTION CONTROL AS TOOLS OF EFFICIENT MANAGEMENT OF PRODUCTION ENTERPRISES

Directory of Open Access Journals (Sweden)

Mateusz BUDYNEK

2016-01-01

Full Text Available The paper discusses the problem of principle methods of production control as a strategy supporting the production system and stimulating efficient solutions in respect management in production enterprises. The article describes MRP, ERP, JIT, KANBAN and TOC methods and focuses on their main goals, principles of functioning as well as benefits re-sulting from their application. The methods represent two diverse strategies of production control, i.e. pull and push strategies. Push strategies are used when the plans apply to the first and principle part of production and are based on the demand forecasts. Pull strategies are used when all planning decisions apply to the final stage and depend on the actual demand or orders from customers.

Industrial production of products like petroleum

Energy Technology Data Exchange (ETDEWEB)

Baurier, P J.H.

1925-02-25

This invention has as its object a process for separating tars, oils, or gases coming from the distillation of carbonaceous materials, such as lignities or shales, to separate all other substances of the same kind and to prepare products like petroleum. The process for present consideration consists essentially in achieving simultaneously hydrogenation of the material (treated for conversion to stable products) and desulfurization of the materials showing the following characteristics: The substances to be treated are fed in the gaseous state, as vapors or pulverized and made to react at a temperature of 300 to 450/sup 0/C in the presence of excess water vapor, on divided metals capable of decomposing the water with release of hydrogen, at a temperature below 450/sup 0/C.

Towards Sustainable Consumption and Production

DEFF Research Database (Denmark)

Ulku, M. Ali; Hsuan, Juliana

2017-01-01

an environmentally conscious (green) consumer who will buy one of two available, horizontally differentiated products: a modular product (M) manufactured by Firm M or a standard product (S) manufactured by Firm S. Firm M can take advantage of its modular production technology and product return policy...... and numerical examples to render practical insights: The refund rate has a strong impact on profits; sensitivity of product greenness can be increased by conscientious advertising, and the reusability of modular parts encourages lower pricing and higher market share. We assert that modularity is a strong...... concept and practice in developing sustainable products and thereby in production, which, in turn, may enhance sustainable consumption. This study's findings have direct implications for reverse supply chain management, and firms should take these findings into account early in the product design phase....

Tobacco and Nicotine Product Testing

Science.gov (United States)

Biener, Lois; Leischow, Scott J.; Zeller, Mitch R.

2012-01-01

Introduction: Tobacco product testing is a critical component of the Family Smoking Prevention and Tobacco Control Act (FSPTCA), which grants the Food and Drug Administration the authority to regulate tobacco products. The availability of methods and measures that can provide accurate data on the relative health risks across types of tobacco products, brands, and subbrands of tobacco products on the validity of any health claims associated with a product, and on how consumers perceive information on products toxicity or risks is crucial for making decisions on the product's potential impact on public health. These tools are also necessary for making assessments of the impact of new indications for medicinal products (other than cessation) but more importantly of tobacco products that may in the future be marketed as cessation tools. Objective: To identify research opportunities to develop empirically based and comprehensive methods and measures for testing tobacco and other nicotine-containing products so that the best science is available when decisions are made about products or policies. Methods: Literature was reviewed to address sections of the FSPTCA relevant to tobacco product evaluation; research questions were generated and then reviewed by a committee of research experts. Results: A research agenda was developed for tobacco product evaluation in the general areas of toxicity and health risks, abuse liability, consumer perception, and population effects. Conclusion: A cohesive, systematic, and comprehensive assessment of tobacco products is important and will require building consensus and addressing some crucial research questions. PMID:21460383

National pulpwood production, 2008

Science.gov (United States)

Tony G. Johnson; Ronald J. Piva; Brian F. Walters; al. et.

2011-01-01

United States’ pulpwood production amounted to 89.2 million cords in 2008. Roundwood production totaled 63.0 million cords and accounted for 71 percent of the Nation’s total pulpwood production. The use of wood residue totaled 26.2 million cords. Georgia led the Nation in total production, with 11.6 million cords. In 2008, 146 mills were operating and drawing wood from...

Southern pulpwood production, 2007

Science.gov (United States)

Tony G. Johnson; Carolyn D. Steppleton; James w. Bentley

2009-01-01

The South’s production of pulpwood increased from 64.7 million cords in 2006 to 65.7 million cords in 2007. Roundwood production increased 1.2 million cords to 47.6 million cords and accounted for 72 percent of the total pulpwood production. The use of wood residue declined 1 percent to 18.2 million cords. Alabama led the South in total production at 10.6 million cords...

SIMULATION AS AN APPROPRIATE WAY OF VERIFYING THE EFFICIENCY OF PRODUCTION VARIANTS IN THE DESIGN OF PRODUCTION AND NON-PRODUCTION SYSTEMS

Directory of Open Access Journals (Sweden)

Marek Kliment

2014-12-01

Full Text Available The paper deals with simulation and her forms of use in designing of production and non-production systems. Points to the possibility of using software can help in planning and subsequently in other phase of the lifecycle production and products. Article informs about some of the advantages of this type of software and his options. Sets out some theoretical knowledge of simulation and in the practical part presents some frequently used simulation software.

ORGANIC PRODUCTION OF SHEEP MILK

Directory of Open Access Journals (Sweden)

Juan Carlos Ángeles Hernández

2014-04-01

Full Text Available Organic production systems are based on natural processes, leveraging local resources and decreasing in soil degradation. Effectiveness of milk production of organic systems vs. conventional production systems is a subject open to debate. There are various studies in which there is a positive effect of organic systems in relation to the welfare and animal health, product quality and environmental impact. However, some authors report lower milk yields production and increased susceptibility to environmental conditions compared with those obtained in conventional systems. The lower milk yields in organic systems in Dairy sheep's production, are related to the limited nutritional value, low genetic potential, and the changing environmental conditions. These systems are mainly a production method for a specific market with premium quality products and high standards in their production processes. Thus, a company organic Dairy sheep production should be considered viable when present a positive global sustainability level, that is socially beneficial, economically viable and environmentally responsible.

75 FR 33312 - Indexing Structured Product Labeling for Human Prescription Drug and Biological Products; Request...

Science.gov (United States)

2010-06-11

...] Indexing Structured Product Labeling for Human Prescription Drug and Biological Products; Request for... Biologics Evaluation and Research (CBER) are indexing certain categories of information in product labeling for use as terms to search repositories of approved prescription medical product structured product...

Utilization of oleo-chemical industry by-products for biosurfactant production

Science.gov (United States)

2013-01-01

Biosurfactants are the surface active compounds produced by micro-organisms. The eco-friendly and biodegradable nature of biosurfactants makes their usage more advantageous over chemical surfactants. Biosurfactants encompass the properties of dropping surface tension, stabilizing emulsions, promoting foaming and are usually non- toxic and biodegradable. Biosurfactants offer advantages over their synthetic counterparts in many applications ranging from environmental, food, and biomedical, cosmetic and pharmaceutical industries. The important environmental applications of biosurfactants include bioremediation and dispersion of oil spills, enhanced oil recovery and transfer of crude oil. The emphasis of present review shall be with reference to the commercial production, current developments and future perspectives of a variety of approaches of biosurfactant production from the micro-organisms isolated from various oil- contaminated sites and from the by-products of oleo-chemical industry wastes/ by-products viz. used edible oil, industrial residues, acid oil, deodorizer distillate, soap-stock etc. PMID:24262384

Lamb Production Costs: Analyses of Composition and Elasticities Analysis of Lamb Production Costs

Directory of Open Access Journals (Sweden)

C. Raineri

2015-08-01

Full Text Available Since lamb is a commodity, producers cannot control the price of the product they sell. Therefore, managing production costs is a necessity. We explored the study of elasticities as a tool for basing decision-making in sheep production, and aimed at investigating the composition and elasticities of lamb production costs, and their influence on the performance of the activity. A representative sheep production farm, designed in a panel meeting, was the base for calculation of lamb production cost. We then performed studies of: i costs composition, and ii cost elasticities for prices of inputs and for zootechnical indicators. Variable costs represented 64.15% of total cost, while 21.66% were represented by operational fixed costs, and 14.19% by the income of the factors. As for elasticities to input prices, the opportunity cost of land was the item to which production cost was more sensitive: a 1% increase in its price would cause a 0.2666% increase in lamb cost. Meanwhile, the impact of increasing any technical indicator was significantly higher than the impact of rising input prices. A 1% increase in weight at slaughter, for example, would reduce total cost in 0.91%. The greatest obstacle to economic viability of sheep production under the observed conditions is low technical efficiency. Increased production costs are more related to deficient zootechnical indexes than to high expenses.

About productive force and labour productivity (questions of the theory and practice

Directory of Open Access Journals (Sweden)

Kulik V.I.

2018-03-01

Full Text Available the authors consider two intermediaries: the intermediary between the world of the nature and the person – means of work or "fixed capital" of a society as productive force of social activities, and the intermediary inside a society – cost in the form of money without what it is impossible to define labour productivity and structural transformations in a society. The article gives engineering understanding of productive force and productivity of the process equipment by the example of calculation and a choice of the automatic transfer line.

Oil production system

Energy Technology Data Exchange (ETDEWEB)

Ballantyne, J F

1983-12-21

A new oil producing system is proposed which consists of a group of underwater wells, an underwater riser and a floating storage facility for the production of the wells. The group of wells and the riser are interconnected through a manifold system in such a way that the production from any well or from the entire group of wells go to the base (foundation) of the riser. From above the riser is connected with the floating storage facility which is equipped, besides tanks for storing the well products, with a separation device for separating the oil and the accompanying gas. The gas is used as a fuel for producing electric power required by the dynamic positioning systems. The products from each well are tested by means of a regulable coupling controlled by means of a cable, which is passed from the surface through the riser. The wellhead equipment for the unslanted wells is mounted on a template previously installed on the sea floor. From the template the well products enter the riser through the manifold unit system.

Alcohol-flavoured tobacco products.

Science.gov (United States)

Jackler, Robert K; VanWinkle, Callie K; Bumanlag, Isabela M; Ramamurthi, Divya

2018-05-01

In 2009, the Food and Drug Administration (FDA) banned characterising flavours in cigarettes (except for menthol) due to their appeal to teen starter smokers. In August 2016, the agency deemed all tobacco products to be under its authority and a more comprehensive flavour ban is under consideration. To determine the scope and scale of alcohol-flavoured tobacco products among cigars & cigarillos, hookahs and electronic cigarettes (e-cigarettes). Alcohol-flavoured tobacco products were identified by online search of tobacco purveyors' product lines and via Google search cross-referencing the various tobacco product types versus a list of alcoholic beverage flavours (eg, wine, beer, appletini, margarita). 48 types of alcohol-flavoured tobacco products marketed by 409 tobacco brands were identified. Alcohol flavours included mixed drinks (n=25), spirits (11), liqueurs (7) and wine/beer (5). Sweet and fruity tropical mixed drink flavours were marketed by the most brands: piña colada (96), mojito (66) and margarita (50). Wine flavours were common with 104 brands. Among the tobacco product categories, brands offering alcohol-flavoured e-cigarettes (280) were most numerous, but alcohol-flavoured products were also marketed by cigars & cigarillos (88) and hookah brands (41). Brands by major tobacco companies (eg, Philip Morris, Imperial Tobacco) were well represented among alcohol-flavoured cigars & cigarillos with five companies offering a total of 17 brands. The widespread availability of alcohol-flavoured tobacco products illustrates the need to regulate characterising flavours on all tobacco products. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

DESIGN VERSUS PRODUCT DEVELOPMENT?

Directory of Open Access Journals (Sweden)

Edu Grieco Mazzini Junior

2015-03-01

Full Text Available Design or product development? The questioning in relation to the employment of such terminology dates back to possible misconceptions regarding interpretation and approach them. Therefore, it can be stated that there are differences between these two terms? In this context, we highlight two views concerning the origin of the design. The first character creative and based on pre-industrial revolution, based on projective and methodologies directed towards the practice of designing products. And second, where design is understood as an industrial process: the development of new products includes, besides a creative procedure are developed, and symbolic formal solutions for products, but also a technical procedure based on the definition of the requirements concerning the product engineering. Is this the most widely accepted interpretation? theoretical studies were conducted from interpretations of the concept of the design proposed by the International Council of Societies of Industrial Design – ICSDI (2012, and for the characterization of the process of product development, we sought to develop an analogy between these two terminologies and can be proved that the use of one of terminology will not cause deviations of interpretation, since both deal with the life cycle of the product. The main results obtained until now the definition of design proposed by the ICSID where it is characterized as a creative activity focused on the complete life cycle of products is the more approaches of the concept of product development.

Animal Product Safety Information

Science.gov (United States)

... Home Animal & Veterinary Safety & Health Product Safety Information Product Safety Information Share Tweet Linkedin Pin it More ... to report adverse experiences with veterinary drugs. Additional Product Information Questions and Answers: Evanger’s Dog and Cat ...

Vector Production in an Academic Environment: A Tool to Assess Production Costs

Science.gov (United States)

Boeke, Aaron; Doumas, Patrick; Reeves, Lilith; McClurg, Kyle; Bischof, Daniela; Sego, Lina; Auberry, Alisha; Tatikonda, Mohan

2013-01-01

Abstract Generating gene and cell therapy products under good manufacturing practices is a complex process. When determining the cost of these products, researchers must consider the large number of supplies used for manufacturing and the personnel and facility costs to generate vector and maintain a cleanroom facility. To facilitate cost estimates, the Indiana University Vector Production Facility teamed with the Indiana University Kelley School of Business to develop a costing tool that, in turn, provides pricing. The tool is designed in Microsoft Excel and is customizable to meet the needs of other core facilities. It is available from the National Gene Vector Biorepository. The tool allows cost determinations using three different costing methods and was developed in an effort to meet the A21 circular requirements for U.S. core facilities performing work for federally funded projects. The costing tool analysis reveals that the cost of vector production does not have a linear relationship with batch size. For example, increasing the production from 9 to18 liters of a retroviral vector product increases total costs a modest 1.2-fold rather than doubling in total cost. The analysis discussed in this article will help core facilities and investigators plan a cost-effective strategy for gene and cell therapy production. PMID:23360377

Current status of production and market of human vaccine products in Korea.

Science.gov (United States)

Kim, So Youn; Cho, Jahyang; Cha, Sung-Ho; Bae, Chong-Woo

2013-07-01

The goal of this study was to build basic information related to the production and market of human vaccine products in Korea, which can be an important indicator to provide basic data in practical use. Statistical data were obtained from the Bank of Korea, Korea Health Industry Development Institute, Korea Pharmaceutical Traders Association, and Korea Pharmaceutical Manufacturers Association. Vaccines are the 10th ranked drugs in the classification of whole complete preparated drugs. The production output of vaccines in Korea was 392.2 billion KRW in 2011, comprising 2.83% of complete preparated drug production output (13 trillion 880.8 billion KRW) and 2.54% of medical-pharmaceutical product output (15 trillion 440.3 billion KRW). The market scale of vaccines in Korea was 710 billion KRW in 2011, with an annual average growth rate of 11% in the past 6 years, comprising 2% of vaccine market in the world. There was also a significant increase in essential vaccines and other preventive vaccines in a global scale. Vaccines have the potential of becoming an emerging attractive industry. Based on the current analysis about the production of vaccine products and market scale, further development of the vaccine industry is expected in Korea.

Product Context Analysis with Twitter Data

OpenAIRE

Sun, Tao

2016-01-01

Context. For the product manager, the product context analysis, which aims to align their products to the market needs, is very important. By understanding the market needs, the product manager knows the product context information about the environment the products conceived and the business the products take place. The product context analysis using the product context information helps the product manager find the accurate position of his/her products and support the decision-making of the...