Will building new reservoirs always help increase the water supply reliability? - insight from a modeling-based global study

Science.gov (United States)

Zhuang, Y.; Tian, F.; Yigzaw, W.; Hejazi, M. I.; Li, H. Y.; Turner, S. W. D.; Vernon, C. R.

2017-12-01

More and more reservoirs are being build or planned in order to help meet the increasing water demand all over the world. However, is building new reservoirs always helpful to water supply? To address this question, the river routing module of Global Change Assessment Model (GCAM) has been extended with a simple yet physical-based reservoir scheme accounting for irrigation, flood control and hydropower operations at each individual reservoir. The new GCAM river routing model has been applied over the global domain with the runoff inputs from the Variable Infiltration Capacity Model. The simulated streamflow is validated at 150 global river basins where the observed streamflow data are available. The model performance has been significantly improved at 77 basins and worsened at 35 basins. To facilitate the analysis of additional reservoir storage impacts at the basin level, a lumped version of GCAM reservoir model has been developed, representing a single lumped reservoir at each river basin which has the regulation capacity of all reservoir combined. A Sequent Peak Analysis is used to estimate how much additional reservoir storage is required to satisfy the current water demand. For basins with water deficit, the water supply reliability can be improved with additional storage. However, there is a threshold storage value at each basin beyond which the reliability stops increasing, suggesting that building new reservoirs will not help better relieve the water stress. Findings in the research can be helpful to the future planning and management of new reservoirs.

Building Gifted Education: One State at a Time

Science.gov (United States)

Jolly, Jennifer L.

2014-01-01

The "Marland" Report was the impetus and structure to provide a more systematic approach to building state and regional gifted programs. One of the strategies used to proliferate the spread of programming for gifted students throughout the states was the National/State Leadership Training Institute on the Gifted and Talented…

Related Rules and Programs that Help States Attain PM Standards

Science.gov (United States)

EPA’s national and regional rules to reduce emissions of pollutants that form particle pollution will help state and local governments meet the PM NAAQS. A number of voluntary programs also are helping areas reduce fine PM pollution.

Buildings Interoperability Landscape

Energy Technology Data Exchange (ETDEWEB)

Hardin, Dave [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stephan, Eric G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wang, Weimin [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Corbin, Charles D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Widergren, Steven E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-12-31

Through its Building Technologies Office (BTO), the United States Department of Energy’s Office of Energy Efficiency and Renewable Energy (DOE-EERE) is sponsoring an effort to advance interoperability for the integration of intelligent buildings equipment and automation systems, understanding the importance of integration frameworks and product ecosystems to this cause. This is important to BTO’s mission to enhance energy efficiency and save energy for economic and environmental purposes. For connected buildings ecosystems of products and services from various manufacturers to flourish, the ICT aspects of the equipment need to integrate and operate simply and reliably. Within the concepts of interoperability lie the specification, development, and certification of equipment with standards-based interfaces that connect and work. Beyond this, a healthy community of stakeholders that contribute to and use interoperability work products must be developed. On May 1, 2014, the DOE convened a technical meeting to take stock of the current state of interoperability of connected equipment and systems in buildings. Several insights from that meeting helped facilitate a draft description of the landscape of interoperability for connected buildings, which focuses mainly on small and medium commercial buildings. This document revises the February 2015 landscape document to address reviewer comments, incorporate important insights from the Buildings Interoperability Vision technical meeting, and capture thoughts from that meeting about the topics to be addressed in a buildings interoperability vision. In particular, greater attention is paid to the state of information modeling in buildings and the great potential for near-term benefits in this area from progress and community alignment.

Country Report on Building Energy Codes in the United States

Energy Technology Data Exchange (ETDEWEB)

Halverson, Mark A.; Shui, Bin; Evans, Meredydd

2009-04-30

This report is part of a series of reports on building energy efficiency codes in countries associated with the Asian Pacific Partnership (APP) - Australia, South Korea, Japan, China, India, and the United States of America (U.S.). This reports gives an overview of the development of building energy codes in U.S., including national energy policies related to building energy codes, history of building energy codes, recent national projects and activities to promote building energy codes. The report also provides a review of current building energy codes (such as building envelope, HVAC, lighting, and water heating) for commercial and residential buildings in the U.S.

Cost analysis of LEED certified United States navy buildings

OpenAIRE

Kirar, Carl V.

2011-01-01

CIVINS (Civilian Institutions) Thesis document A study was completed at UW-Madison in 2010 that reviewed the energy consumption of US Navy buildings which earned Leadership in Energy and Environmental Design (LEED) certification by the United States Green Building Council (USGBC). The research compared LEED certified buildings to a commercial counterpart within the US Navy inventory against Executive Order (EO) 13423. The EO mandated that all federal agencies meet a 30 percent reduction of...

The Shared Building Portfolio: an exploration and typology

DEFF Research Database (Denmark)

Brinkø, Rikke; Meel, Juriaan van; Nielsen, Susanne Balslev

2014-01-01

Purpose: The purpose of this paper is to explore shared-use of facilities as a concept that can help organizations to make better, more sustainable use of their building portfolios. The practical aim is to present a typology to help classify, describe and evaluate the different options for sharing...... facilities from a facility manager’s point of view. Background (State of the Art) : Space management literature provides examples and concepts for sharing space, such as ‘hot-desking’, within a given organisational and physical setting. However, this literature rarely deals with sharing on a building level...... of municipalities and larger companies. It can help them get a better understanding of how they can minimize the need for building new by better utilization of the existing building stock for increased sustainability or as a corporate-socialresponsibility activity. Research limitations: The typology is a work...

Mastery of energy in the French State buildings

Energy Technology Data Exchange (ETDEWEB)

Anon.

1996-06-01

One of the goals of the ADEME (the French Environment and Mastery of Energy Agency) is to improve the energy efficiency of buildings and of their equipments. Public and State buildings represent an important source of energy saving possibilities concerning the heating, the lighting and the air-conditioning. Total buildings energy consumption reached 86.3 Mtep in 1994 (45.2% of the total French energy consumption). State buildings represent only a 2.2 Mtep consumption per year for a heated surface of 65 millions of m{sup 2}. Heating represents 60% of this consumption. The corresponding functioning expenses are estimated to 3 billions of French Francs from which about 500 MF could be saved using more performing equipments and materials. In 1991, the French Ministry of Law in collaboration with the ADEME, carried out an action plan of energy audits for the mastery of energy in the French Law Courts. This action led to a 2.3 MF saving per year, from which 2.3 MF are gained without investments and 1.4 MF are linked to modernization works. Financing can be done by taking a 10 years credit-lease with refunding annuities lower than the saving generated by the investment. (J.S.). 1 ref., 1 photo.

Stability Operations and State-Building: Continuities and Contingencies

National Research Council Canada - National Science Library

Browder, Dewey A; Kaufmann, Greg

2008-01-01

The purpose of this academic colloquium was to identify principles and supporting policies of state-building that will enhance America's ability "to win the peace" while stabilizing chaotic regions...

Seismic evaluation of buildings in the Eastern and Central United States

International Nuclear Information System (INIS)

Malley, J.O.; Poland, C.D.

1991-01-01

The vast majority of the existing buildings in the Central and Eastern United States have not been designed to resist seismic forces, even though it is becoming widely accepted that there is a potential for damaging earthquakes in these regions for the country. These buildings, therefore, may constitute a serious threat to life safety in the event of a major earthquake. The ATC-14 procedure for the seismic evaluation of existing buildings has begun to gain wide acceptance since its publication in 1987. The National Center for Earthquake Engineering Research (NCEER) funded a project to critically assess the applicability of ATC-14 to buildings in the Eastern and Central United States. This NCEER project developed a large volume of recommended modifications to ATC-14 which are intended to improve the modifications to ATC-14 procedure's recommendations for the seismic evaluation of buildings in regions of low siesmicity. NCEER is sponsoring a second project which will produce a separate document for the seismic evaluation of existing buildings which specifically focuses on structures in these areas of the country. This report, which should be completed in 1991, will provide a valuable tool for practicing engineers performing these evaluations in the Eastern and Central United States. This paper will present the results of these NCEER projects and introduce the revised ATC-14 methodology

Innovative Approaches to Building Comprehensive Talent Pipelines: Helping to Grow a Strong and Diverse Professional Workforce

Directory of Open Access Journals (Sweden)

R. Cherinka

2015-10-01

Full Text Available The world today is constantly changing requiring organizations to adapt quickly and seek expertise to help meet the demands on their business. There are many workforce challenges that organizations seek to overcome, and one of the hardest things to do in modern corporations is to keep the talent pool young and vibrant. Early career hires tend to bring new and exciting ideas into play that may not even be considered by their more seasoned peers. The challenge with early career hires, especially in the Science, Technology, Engineeringand Math (STEM career fields, is the extreme difficulty in finding candidates who, not only have book knowledge, but also have hands-on, real world experience. Statistics show that this is a real concern to professional workforce employers. In this presentation, we highlight a model aimed at adopting new approaches for seeking and evaluating high quality candidates for on-boarding, conducting interviews and hiring to build a corporate talent pipeline. We discuss the model as it relates to recruiting, training, competition-based interviewing and providing hands-on work experience toward helping to build strong professionals in an organization. We conclude by highlighting several examples of successful approaches and their outcomes.

Building Self-Esteem: A Self-Help Guide

Science.gov (United States)

... ways you can help yourself to feel better. Charles G. Curie, M.A., A.C.S.W. Administrator ... Thoughts About Yourself to Positive Ones Activities That Will Help You Feel Good About Yourself In Conclusion ...

Energy Efficiency Program Administrators and Building Energy Codes

Science.gov (United States)

Explore how energy efficiency program administrators have helped advance building energy codes at federal, state, and local levels—using technical, institutional, financial, and other resources—and discusses potential next steps.

The early moments of Social Help and its buildings for childhood. The press as a means of propaganda

Directory of Open Access Journals (Sweden)

Cristina González Maza

2010-03-01

Full Text Available The aim of this work is the study of Social Help, one of the most important aid organizations and greater activity in the recent past in Spain.Emerged to meet the needs of a population without means for the devastating effects of war. Of all the buildings for the poor, large numbers were intended for children's world.To better understand the operation of this organization, besides the consultation of somemonographs, managing the local press has been a great help, since it is a reflection of the society in wich it arises.

Realization of multi-parameter and multi-state in fault tree computer-aided building software

International Nuclear Information System (INIS)

Guo Xiaoli; Tong Jiejuan; Xue Dazhi

2004-01-01

More than one parameter and more than one failed state of a parameter are often involved in building fault tree, so it is necessary for fault tree computer-aided building software to deal with multi-parameter and multi-state. Fault Tree Expert System (FTES) has the target of aiding the FT-building work of hydraulic systems. This paper expatiates on how to realize multi-parameter and multi-state in FTES with focus on Knowledge Base and Illation Engine. (author)

Louisiana State Lands and Buildings, Geographic NAD83, LA State Land Office (2007) [slabs_slo_2007

Data.gov (United States)

Louisiana Geographic Information Center — This dataset represents land and/or building areas for the state of Louisiana. This dataset was compiled by the State Land Office from Historical Records (SLABS)...

Contaminant ingress into multizone buildings: An analytical state-space approach

KAUST Repository

Parker, Simon

2013-08-13

The ingress of exterior contaminants into buildings is often assessed by treating the building interior as a single well-mixed space. Multizone modelling provides an alternative way of representing buildings that can estimate concentration time series in different internal locations. A state-space approach is adopted to represent the concentration dynamics within multizone buildings. Analysis based on this approach is used to demonstrate that the exposure in every interior location is limited to the exterior exposure in the absence of removal mechanisms. Estimates are also developed for the short term maximum concentration and exposure in a multizone building in response to a step-change in concentration. These have considerable potential for practical use. The analytical development is demonstrated using a simple two-zone building with an inner zone and a range of existing multizone models of residential buildings. Quantitative measures are provided of the standard deviation of concentration and exposure within a range of residential multizone buildings. Ratios of the maximum short term concentrations and exposures to single zone building estimates are also provided for the same buildings. © 2013 Tsinghua University Press and Springer-Verlag Berlin Heidelberg.

OSART Works to Help Member States

International Nuclear Information System (INIS)

Kaiser, Peter

2013-01-01

Full text: Nuclear safety is a never ending pursuit for improvement, and one of the more prominent IAEA efforts that help Member States achieve higher levels of safety is the Operational Safety Review Team (OSART) programme. In OSART missions, the IAEA coordinates internationally-based teams of experts who conduct reviews of operational safety performance at nuclear power plants. The IAEA on 14 June 2013 marked the 30th anniversary of OSART. In 1983, the Agency conducted its first OSART mission to the Kori Nuclear Power Plant in the Republic of Korea, and it conducted a total of 174 OSART missions over the following 30 years. The reviews have been done in 34 nations at 103 nuclear sites. (author)

Communities Are Becoming "SolSmart" (With Some Help From Their States)

Science.gov (United States)

Associated Areas of Regulation Code PV related area National Electric Code Electrical safety, wiring building in the event of a fire (see 2010 Oregon Solar Installation Specialty Code and Commentary) (Figure Installation Specialty Code and Commentary Ensuring Solar Access States have also set policies to ensure

Facing frontiers : everyday practice of state-building in South Sudan

NARCIS (Netherlands)

Vries, L.A.

2012-01-01

This study investigates daily performance of power in a post-conflict society and argues that the overall process of state-building in South Sudan cannot be properly understood in separation from the ways in which state power is locally exercised. It specifically analyzes South Sudan’s political

Identity Politics, Democratisation and State Building in Ethiopia's ...

African Journals Online (AJOL)

Relations between identity politics, democratisation, and state building are complex, especially in the cases of relatively young post-colonial countries, such as those in Sub-Saharan Africa. The complexity emanates, in part, from the multiplicity of the intervening variables. This paper proposes that the factors that impinge on ...

Building Energy Efficiency in India: Compliance Evaluation of Energy Conservation Building Code

Energy Technology Data Exchange (ETDEWEB)

Yu, Sha; Evans, Meredydd; Delgado, Alison

2014-03-26

India is experiencing unprecedented construction boom. The country doubled its floorspace between 2001 and 2005 and is expected to add 35 billion m2 of new buildings by 2050. Buildings account for 35% of total final energy consumption in India today, and building energy use is growing at 8% annually. Studies have shown that carbon policies will have little effect on reducing building energy demand. Chaturvedi et al. predicted that, if there is no specific sectoral policies to curb building energy use, final energy demand of the Indian building sector will grow over five times by the end of this century, driven by rapid income and population growth. The growing energy demand in buildings is accompanied by a transition from traditional biomass to commercial fuels, particularly an increase in electricity use. This also leads to a rapid increase in carbon emissions and aggravates power shortage in India. Growth in building energy use poses challenges to the Indian government. To curb energy consumption in buildings, the Indian government issued the Energy Conservation Building Code (ECBC) in 2007, which applies to commercial buildings with a connected load of 100 kW or 120kVA. It is predicted that the implementation of ECBC can help save 25-40% of energy, compared to reference buildings without energy-efficiency measures. However, the impact of ECBC depends on the effectiveness of its enforcement and compliance. Currently, the majority of buildings in India are not ECBC-compliant. The United Nations Development Programme projected that code compliance in India would reach 35% by 2015 and 64% by 2017. Whether the projected targets can be achieved depends on how the code enforcement system is designed and implemented. Although the development of ECBC lies in the hands of the national government – the Bureau of Energy Efficiency under the Ministry of Power, the adoption and implementation of ECBC largely relies on state and local governments. Six years after ECBC�

Buildings for the 21st Century, Summer 2001. Office of Building Technology, State and Community Programs (BTS) Newsletter

International Nuclear Information System (INIS)

Burgert, S.

2001-01-01

The Buildings for the 21st Century newsletter is produced by the Office of Building Technology, State and Community Programs and contains information on building programs, events, products, and initiatives, with a focus on energy efficiency and renewable energy. The summer issue includes information on technology roadmap initiatives, new energy computer simulation software, an educational CD with energy lessons for teachers, a CD with energy-saving tips, a study on the efficiency of clothes washers, a loan program in New York, and a calendar of meetings and conferences

Buildings for the 21st Century, Summer 2001. Office of Building Technology, State and Community Programs (BTS) Newsletter

Energy Technology Data Exchange (ETDEWEB)

Burgert, S.

2001-07-11

The Buildings for the 21st Century newsletter is produced by the Office of Building Technology, State and Community Programs and contains information on building programs, events, products, and initiatives, with a focus on energy efficiency and renewable energy. The summer issue includes information on technology roadmap initiatives, new energy computer simulation software, an educational CD with energy lessons for teachers, a CD with energy-saving tips, a study on the efficiency of clothes washers, a loan program in New York, and a calendar of meetings and conferences.

State-building and human resources for health in fragile and conflict-affected states: exploring the linkages.

Science.gov (United States)

Witter, Sophie; Falisse, Jean-Benoit; Bertone, Maria Paola; Alonso-Garbayo, Alvaro; Martins, João S; Salehi, Ahmad Shah; Pavignani, Enrico; Martineau, Tim

2015-05-15

Human resources for health are self-evidently critical to running a health service and system. There is, however, a wider set of social issues which is more rarely considered. One area which is hinted at in literature, particularly on fragile and conflict-affected states, but rarely examined in detail, is the contribution which health staff may or do play in relation to the wider state-building processes. This article aims to explore that relationship, developing a conceptual framework to understand what linkages might exist and looking for empirical evidence in the literature to support, refute or adapt those linkages. An open call for contributions to the article was launched through an online community. The group then developed a conceptual framework and explored a variety of literatures (political, economic, historical, public administration, conflict and health-related) to find theoretical and empirical evidence related to the linkages outlined in the framework. Three country case reports were also developed for Afghanistan, Burundi and Timor-Leste, using secondary sources and the knowledge of the group. We find that the empirical evidence for most of the linkages is not strong, which is not surprising, given the complexity of the relationships. Nevertheless, some of the posited relationships are plausible, especially between development of health cadres and a strengthened public administration, which in the long run underlies a number of state-building features. The reintegration of factional health staff post-conflict is also plausibly linked to reconciliation and peace-building. The role of medical staff as part of national elites may also be important. The concept of state-building itself is highly contested, with a rich vein of scepticism about the wisdom or feasibility of this as an external project. While recognizing the inherently political nature of these processes, systems and sub-systems, it remains the case that state-building does occur over time

State of the art on historic building insulation materials and retrofit strategies

DEFF Research Database (Denmark)

Blumberga, Andra; Kass, Kristaps; Kamendere, Edite

2016-01-01

This report provides an analysis and evaluation of a state-of-the-art of internal insulation materials and methods for application in historic buildings, and review on methods, tools and guidelines used as decision making tools for implementation of internal insulation in historic buildings. Hist...

Sub-State Actors and Leadership in the Evolution of the African State

National Research Council Canada - National Science Library

Tall, Samba

1998-01-01

.... Understanding the root causes of the mutations occurring in today's African states will help to build legitimacy for future Internal Security Assistance Programs and Military Operations Other Than War...

Racism in the United States:A Case Study of The Help

Institute of Scientific and Technical Information of China (English)

余荣芳

2015-01-01

Although slavery was abolished in the 1860s, its influence still continued and the blacks were not readily assimilated in-to the large American culture. Most of them remain in the South, where they were legally segregated from whites. This paper takes the Hollywood movie The Help as an example, and describes racism embodied in the movie and analyzes the root of racism. It is hoped that this paper will help readers to have a better understanding of racism in the United States.

Legal Reform, De-colonization and State-building in Palestine ...

International Development Research Centre (IDRC) Digital Library (Canada)

Legal Reform, De-colonization and State-building in Palestine. Demands for legal reform have come from both inside and outside Palestine. Inside Palestine, legal reform is seen as a prerequisite for democracy and good governance. Outside, legal reform is perceived as integral to the continued peace process with Israel.

Hooked on Helping

Science.gov (United States)

Longhurst, James; McCord, Joan

2014-01-01

In this article, teens presenting at a symposium on peer-helping programs describe how caring for others fosters personal growth and builds positive group cultures. Their individual thoughts and opinions are expressed.

Building Knowledge Structures by Testing Helps Children With Mathematical Learning Difficulty.

Science.gov (United States)

Zhang, Yiyun; Zhou, Xinlin

2016-01-01

Mathematical learning difficulty (MLD) is prevalent in the development of mathematical abilities. Previous interventions for children with MLD have focused on number sense or basic mathematical skills. This study investigated whether mathematical performance of fifth grade children with MLD could be improved by developing knowledge structures by testing using a web-based curriculum learning system. A total of 142 children with MLD were recruited; half of the children were in the experimental group (using the system), and the other half were in the control group (not using the system). The children were encouraged to use the web-based learning system at home for at least a 15-min session, at least once a week, for one and a half months. The mean accumulated time of testing on the system for children in the experimental group was 56.2 min. Children in the experimental group had significantly higher scores on their final mathematical examination compared to the control group. The results suggest that web-based curriculum learning through testing that promotes the building of knowledge structures for a mathematical course was helpful for children with MLD. © Hammill Institute on Disabilities 2014.

Comparison of building energy use data between the United States and China

Energy Technology Data Exchange (ETDEWEB)

Xia, Jianjun; Hong, Tianzhen; Shen, Qi; Feng, Wei; Yang, Le; Im, Piljae; Lu, Alison; Bhandari, Mahabir

2013-10-30

Buildings in the United States and China consumed 41percent and 28percent of the total primary energy in 2011, respectively. Good energy data are the cornerstone to understanding building energy performance and supporting research, design, operation, and policy making for low energy buildings. This paper presents initial outcomes from a joint research project under the U.S.-China Clean Energy Research Center for Building Energy Efficiency. The goal is to decode the driving forces behind the discrepancy of building energy use between the two countries; identify gaps and deficiencies of current building energy monitoring, data collection, and analysis; and create knowledge and tools to collect and analyze good building energy data to provide valuable and actionable information for key stakeholders. This paper first reviews and compares several popular existing building energy monitoring systems in both countries. Next a standard energy data model is presented. A detailed, measured building energy data comparison was conducted for a few office buildings in both countries. Finally issues of data collection, quality, sharing, and analysis methods are discussed. It was found that buildings in both countries performed very differently, had potential for deep energy retrofit, but that different efficiency measures should apply.

Construction of a Solid State Research Facility, Building 3150

International Nuclear Information System (INIS)

1993-07-01

The Department of Energy (DOE) proposes to construct a new facility to house the Materials Synthesis Group (MSG) and the Semiconductor Physics Group (SPG) of the Solid State Division, Oak Ridge National Laboratory (ORNL). The location of the proposed action is Roane County, Tennessee. MSG is involved in the study of crystal growth and the preparation and characterization of advanced materials, such as high-temperature superconductors, while SPG is involved in semiconductor physics research. All MSG and a major pardon of SPG research activities are now conducted in Building 2000, a deteriorating structure constructed in the 1940. The physical deterioration of the roof; the heating, ventilation, and air conditioning (HVAC) system; and the plumbing make this building inadequate for supporting research activities. The proposed project is needed to provide laboratory and office space for MSG and SPG and to ensure that research activities can continue without interruption due to deficiencies in the building and its associated utility systems

Wood and Other Materials Used to Construct Nonresidential Buildings in the United States 2011

Science.gov (United States)

Craig Adair; David B. McKeever; Chris Gaston; Margaret. Stewart

2013-01-01

The construction of low-rise nonresidential buildings is an important market for lumber, engineered wood products, and structural and nonstructural wood panels in the United States. This report examines low-rise nonresidential buildings of six or fewer stories. Those with more than six stories are normally severely restricted by building codes from being wood framed....

Technical definition for nearly zero energy buildings nZEB

DEFF Research Database (Denmark)

Kurnitski, Jarek; Allard, Francis; Braham, Derrick

or maximum harmonized requirements as well as details of energy performance calculation framework, it will be up to the Member States to define what these for them exactly constitute. In the definition local conditions are to be obviously taken into account, but the uniform methodology can be used in all......This REHVA Task Force proposes a technical definition for nearly zero energy buildings required in the implementation of the Energy performance of buildings directive recast. Energy calculation framework and system boundaries associated with the definition are provided to specify which energy flows...... in which way are taken into account in the energy performance assessment. The intention of the Task Force is to help the experts in the Member States in defining the nearly zero energy buildings in a uniform way. The directive requires nearly zero energy buildings, but since it does not give minimum...

75 FR 6643 - Publication of State Plan Pursuant to the Help America Vote Act

Science.gov (United States)

2010-02-10

... ELECTION ASSISTANCE COMMISSION Publication of State Plan Pursuant to the Help America Vote Act... plans previously submitted by New Jersey and Wisconsin. DATES: This notice is effective upon publication... the State plans submitted for publication provide information on how the respective State succeeded in...

78 FR 77110 - Publication of State Plan Pursuant to the Help America Vote Act

Science.gov (United States)

2013-12-20

... ELECTION ASSISTANCE COMMISSION Publication of State Plan Pursuant to the Help America Vote Act... at www.eac.gov . DATES: This notice is effective upon publication in the Federal Register. FOR... publication provide information on how the respective State succeeded in carrying out its previous State plan...

Impact of building technology, state and community programs on United States employment and wage income

International Nuclear Information System (INIS)

Scott, M.J.; Hostick, D.J.; Elliott, D.B.; Schultz, R.W.

1998-04-01

As part of measuring the impact of government programs on improving the energy efficiency of the nation's building stock, the Department of Energy Office of Building Technology, State and Community Programs (BTS) is interested in assessing the economic impacts of its portfolio of programs, specifically the potential impact on national employment and income. This assessment is being done for the first time in FY99 as a supplement to the Government Performance and Results Act (GPRA--formerly, Quality Metrics) estimates of primary energy savings and environmental and direct financial benefits of the BTS programs. The programmatic needs of BTS suggest that a simple, flexible, user-friendly method is needed to derive national employment and income impacts of individual BTS programs. Therefore, BTS funded Pacific Northwest National Laboratory (PNNL) to develop a special-purpose version of the Impact Analysis for Planning (IMPLAN) national input-output model (Minnesota IMPLAN Group, Inc. 1997) specifically to estimate the employment and income effects of building energy technologies. The special-purpose version of the IMPLAN model used in this study is called ImBuild. Extensive documentation and a user's guide are provided in Scott et al. (1998). Compared with simple economic multiplier approaches, such as the published multipliers from the Department of Commerce Regional Input-Output Modeling System (RIMS 2), ImBuild allows for more complete and automated analysis of the economic impacts of energy efficiency investments in buildings. ImBuild is also easier to use than existing macroeconomic simulation models. In this report, the authors use the ImBuild model to calculate the impact of all 32 BTS programs reported in the BTS GPRA Metrics Estimates, FY99 Budget Request, December 19, 1997

Building for a Changing Climate - Adaptation through planning and construction

Energy Technology Data Exchange (ETDEWEB)

2009-08-15

Adaptation through planning and construction can help to reduce the negative effects of climate change, such as flooding, landslides, landslips, and erosion. The National Board of Housing, Building and Planning (Boverket) has conducted an analysis of how the Planning and Building Act can assist in the work towards climate change adaptation. This brochure provides guidance and support to for example property owners, developers, officials and decision makers in municipalities and the state

The Financial Education Tool Kit: Helping Teachers Meet State- Mandated Personal Finance Requirements

Science.gov (United States)

St. Pierre, Eileen; Richert, Charlotte; Routh, Susan; Lockwood, Rachel; Simpson, Mickey

2012-01-01

States are recognizing the need for personal financial education and have begun requiring it as a condition for high school graduation. Responding to teacher requests to help them meet state-mandated financial education requirements, FCS educators in the Oklahoma Cooperative Extension Service developed a financial education tool kit. This article…

How to Define Nearly Net Zero Energy Buildings nZEB

DEFF Research Database (Denmark)

Kurnitski, Jarek; Allard, Francis; Braham, Derrick

2011-01-01

or maximum harmonized requirements as well as details of energy performance calculation framework, it will be up to the Member State to define what these for them exactly constitute. In the definition, local conditions are to be obviously taken into account, but the uniform methodology can be used in all......This REHVA Task Force proposes a technical definition for nearly zero energy buildings required in the implementation of the Energy performance of buildings directive recast. Energy calculation framework and system boundaries associated with the definition are provided to specify which energy flows...... in which way are taken into account in the energy performance assessment. The intention of the Task Force is to help the experts in the Member States in defining the nearly zero energy buildings in a uniform way. The directive requires nearly zero energy buildings, but since it does not give minimum...

Solar energy potential of the largest buildings in the United States

Science.gov (United States)

Wence, E. R.; Grodsky, S.; Hernandez, R. R.

2017-12-01

Sustainable pathways of land use for energy are necessary to mitigate climate change and limit conversion of finite land resources needed for conservation and food production. Large, commercial buildings (LCBs) are increasing in size and number throughout the United States (US) and may serve as suitable recipient environments for photovoltaic (PV) solar energy infrastructure that may support a low carbon, low land footprint energy transition. In this study, we identified, characterized, and evaluated the technical potential of the largest, commercial building rooftops (i.e., exceeding 110,000 m2) and their associated parking lots in the US for PV solar energy systems using Aurora, a cloud-based solar optimization platform. We also performed a case study of building-specific electricity generation: electricity consumption balance. Further, we quantified the environmental co-benefit of land sparing and associated avoided emissions (t-CO2-eq) conferred under the counterfactual scenario that solar development would otherwise proceed as a ground-mounted, utility-scale PV installation of equal nominal capacity. We identified and mapped 37 LCBs (by rooftop area) across 18 states in the US, spanning from as far north as the state of Minnesota to as far south as Florida. Rooftop footprints range from 427,297 to 113,689 m2 and have a cumulative surface area of 99.8 million ft2. We characterize the LCBs as either: distribution/warehouse, factory, shopping center, or administrative office/facility. Three of the 37 LCBs currently support rooftop PV and the numbers of associated, detached buildings number up to 38. This study elucidates the extent to which LCBs and their respective parking lots can serve as suitable sites for PV solar energy generation. Lastly, this study demonstrates research-based applications of the Aurora energy modeling platform and informs decision-making focused on redirecting energy development towards human-modified landscapes to prioritize land use for

Towards nearly zero-energy buildings: The state-of-art of national regulations in Europe

International Nuclear Information System (INIS)

Annunziata, Eleonora; Frey, Marco; Rizzi, Francesco

2013-01-01

Energy efficiency in buildings is an important objective of energy policy and strategy in Europe. A survey questionnaire was conducted among the 27 European Union Member States. This study aims to provide an overview of the current national regulatory framework focusing on three aspects: 1) integration of energy efficiency and renewable energy requirements, 2) translation of investments in energy saving into economic value, 3) commitment towards “nearly zero-energy” target. The study shows that European countries have adopted different approaches in the design of their national regulatory framework. This heterogeneity consists of four main factors: different authorities involved in energy regulations, traditional building regulations and enforcement models, different contextual characteristics, and maturity of the country in the implementation of energy efficiency measures. These differences are important to take into account country's profile in order to improve the sharing of best-practices and energy efficiency governance among European Union Member States. - Highlights: ► We analyze the legal status for energy efficient buildings in 27 European Countries. ► We examine building markets, renewable technology and “nearly zero-energy” targets. ► European Member States provide a heterogeneous environment to the recast of EPBD. ► National regulatory frameworks have evolved different structures and responsibilities. ► We provide directions in further enforcing energy efficiency in buildings regulation

School Mental Health: The Impact of State and Local Capacity-Building Training

Science.gov (United States)

Stephan, Sharon; Paternite, Carl; Grimm, Lindsey; Hurwitz, Laura

2014-01-01

Despite a growing number of collaborative partnerships between schools and community-based organizations to expand school mental health (SMH) service capacity in the United States, there have been relatively few systematic initiatives focused on key strategies for large-scale SMH capacity building with state and local education systems. Based on a…

Tribal Green Building Toolkit

Science.gov (United States)

This Tribal Green Building Toolkit (Toolkit) is designed to help tribal officials, community members, planners, developers, and architects develop and adopt building codes to support green building practices. Anyone can use this toolkit!

41 CFR 102-80.85 - Are Federally owned and leased buildings exempt from State and local code requirements in fire...

Science.gov (United States)

2010-07-01

... leased buildings exempt from State and local code requirements in fire protection? 102-80.85 Section 102... Fire Prevention State and Local Codes § 102-80.85 Are Federally owned and leased buildings exempt from State and local code requirements in fire protection? Federally owned buildings are generally exempt...

KNOWLEDGE FOR INTELLIGENCE: DISCUSSING THE STATE AND THE ROLE OF BUILDING DATA IN ITALY

Directory of Open Access Journals (Sweden)

A. Pasquinelli

2016-09-01

Full Text Available The availability of integrated information on buildings is the premise for an effective assets management and the provision of innovative services to buildings users: such form of knowledge relies on the efficient exploitation of existing data, providing a complete overview on the state of buildings, and on the acquisition of real-time data flows, coming from sensor and mobile devices, reporting users behaviours. If, on the one hand, technology is progressively enabling the management of new huge streams of data, on the other hand the interconnection among traditional and well rooted datasets, the majority of which in charge of public administrations, is not always guaranteed. While, at European level, interoperability issues among public archives concerning buildings were properly addressed, and the relevance of geo-information is widely recognized, in Italy this process is still taking time to be undertaken. This paper discuss the current state of Building Information in Italy, outlining a possible path for the creation of a georeferenced Building Information System at municipal level, starting from the informative heritage available in existing databases, generated with different purposes and maintained by independent authorities: the idea is to solicit that digitalization process, started a decade ago with the “Digital Administration Code”, through the proposition of real use cases that might be implemented once that public data on buildings are profitably combined together.

75 FR 51759 - Publication of State Plan Pursuant to the Help America Vote Act

Science.gov (United States)

2010-08-23

... ELECTION ASSISTANCE COMMISSION Publication of State Plan Pursuant to the Help America Vote Act... previously submitted by California. DATES: This notice is effective upon publication in the Federal Register... plans submitted for publication provide information on how the respective state succeeded in carrying...

Comparison of Standard 90.1-2007 and the 2009 IECC with Respect to Commercial Buildings

Energy Technology Data Exchange (ETDEWEB)

Conover, David R.; Bartlett, Rosemarie; Halverson, Mark A.

2009-12-11

The U.S. Department of Energy’s (DOE’s) Building Energy Codes Program (BECP) has been asked by some states and energy code stakeholders to address the comparability of the 2009 International Energy Conservation Code® (IECC) as applied to commercial buildings and ANSI/ASHRAE/IESNA Standard 90.1-2007 (hereinafter referred to as Standard 90.1-07). An assessment of comparability will help states respond to and implement conditions specified in the State Energy Program (SEP) Formula Grants American Recovery and Reinvestment Act Funding Opportunity, Number DE-FOA-0000052, and eliminate the need for the states individually or collectively to perform comparative studies of the 2009 IECC and Standard 90.1-07. The funding opportunity announcement contains the following conditions: (2) The State, or the applicable units of local government that have authority to adopt building codes, will implement the following: (A) A residential building energy code (or codes) that meets or exceeds the most recent International Energy Conservation Code, or achieves equivalent or greater energy savings. (B) A commercial building energy code (or codes) throughout the State that meets or exceeds the ANSI/ASHRAE/IESNA Standard 90.1-2007, or achieves equivalent or greater energy savings . (C) A plan to achieve 90 percent compliance with the above energy codes within eight years. This plan will include active training and enforcement programs and annual measurement of the rate of compliance. With respect to item (B) above, many more states, regardless of the edition date, directly adopt the IECC than Standard 90.1-07. This is predominately because the IECC is a model code and part of a coordinated set of model building codes that state and local government have historically adopted to regulate building design and construction. This report compares the 2009 IECC to Standard 90.1-07 with the intent of helping states address whether the adoption and application of the 2009 IECC for commercial

75 FR 39671 - Publication of State Plan Pursuant to the Help America Vote Act

Science.gov (United States)

2010-07-12

... ELECTION ASSISTANCE COMMISSION Publication of State Plan Pursuant to the Help America Vote Act... plan previously submitted by South Dakota. DATES: This notice is effective upon publication in the... 254(a)(12), all the state plans submitted for publication provide information on how the respective...

Evaluation of Maintenance Management in Iraqi Governmental Buildings

Directory of Open Access Journals (Sweden)

Qasim Mohammed Doos

2016-09-01

Full Text Available Impact of buildings in Iraq and other countries on the environment is obvious; this problem began to take scientific and humanitarian dimensions in order to reduce and eliminate this problem. This impact can be seen through the energy, water and raw materials consumed for the establishment, operation and maintenance of these buildings, as well as the emissions of hazardous gases and generations of solid wastes. This work was conducted to assess the current maintenance managerial practice for the governmental buildings to stand on the main obstacle and extrapolation of measures by means of interviews with experts to determine the effective factors and closed questionnaire to state the features and the need for new building maintenance management system which may assist for modeling new building maintenance management system which may help to reduce the deterioration levels of governmental buildings and the emission of hazardous gases and solid waste with cost efficient approach.

Here, There and Everywhere: Emotion and Mental State Talk in Different Social Contexts Predicts Empathic Helping in Toddlers

Directory of Open Access Journals (Sweden)

Jesse eDrummond

2014-04-01

Full Text Available A growing body of literature suggests that parents socialize early-emerging prosocial behavior across varied contexts and in subtle yet powerful ways. We focus on discourse about emotions and mental states as one potential socialization mechanism given its conceptual relevance to prosocial behavior and its known positive relations with emotion understanding and social-cognitive development, as well as parents’ frequent use of such discourse beginning in infancy. Specifically, we ask how parents’ emotion and mental state talk with their toddlers relates to toddlers’ helping and how these associations vary by context. Children aged 18- to 30-months (n=38 interacted with a parent during book reading and joint play with toys, two everyday contexts that afford parental discussion of emotions and mental states. Children also participated in instrumental and empathic helping tasks. Results revealed that although parents discuss mental states with their children in both contexts, the nature of their talk differs: during book reading parents labeled emotions and mental states significantly more often than during joint play, especially simple affect words (e.g. happy, sad and explanations or elaborations of emotions; whereas they used more desire talk and mental state words (e.g. think, know in joint play. Parents’ emotion and mental state discourse related to children’s empathic, emotion-based helping behavior; however, it did not relate to instrumental, action-based helping. Moreover, relations between parent talk and empathic helping varied by context: children who helped more quickly had parents who labeled emotion and mental states more often during joint play and who elicited this talk more often during book reading. As emotion and mental state talk both varies between contexts and exhibits context-specific associations with empathic prosocial behavior early in development, we conclude that such discourse may be a key form of socialization

Decision-making in the Pre-design Stage of Sustainable Building Renovation Projects

DEFF Research Database (Denmark)

Gade, Anne Nørkjær; Jensen, Rasmus Lund; Larsen, Tine Steen

2017-01-01

There is a great potential in renovating our existing building stock, in terms of improving environmental, economic and social qualities. Meeting the increasing performance requirements for sustainable construction entails an increasing level of complexity in the design process of both new...... buildings and renovation projects. Decision support tools are one solution that can help the building owner manage this complexity. This study investigates the current decision-making processes among Danish professional building owners, in order to propose a conceptual framework for future decision support...... tools for sustainable renovation. Design Science Research Methodology has been used as the main methodological framework. Current practices for setting goals for sustainability, determining the current state of the buildings and prioritizing which buildings to renovate within a building portfolio, have...

Optimizing Energy Consumption in Building Designs Using Building Information Model (BIM

Directory of Open Access Journals (Sweden)

Egwunatum Samuel

2016-09-01

Full Text Available Given the ability of a Building Information Model (BIM to serve as a multi-disciplinary data repository, this paper seeks to explore and exploit the sustainability value of Building Information Modelling/models in delivering buildings that require less energy for their operation, emit less CO2 and at the same time provide a comfortable living environment for their occupants. This objective was achieved by a critical and extensive review of the literature covering: (1 building energy consumption, (2 building energy performance and analysis, and (3 building information modeling and energy assessment. The literature cited in this paper showed that linking an energy analysis tool with a BIM model helped project design teams to predict and create optimized energy consumption. To validate this finding, an in-depth analysis was carried out on a completed BIM integrated construction project using the Arboleda Project in the Dominican Republic. The findings showed that the BIM-based energy analysis helped the design team achieve the world’s first 103% positive energy building. From the research findings, the paper concludes that linking an energy analysis tool with a BIM model helps to expedite the energy analysis process, provide more detailed and accurate results as well as deliver energy-efficient buildings. The study further recommends that the adoption of a level 2 BIM and the integration of BIM in energy optimization analyse should be made compulsory for all projects irrespective of the method of procurement (government-funded or otherwise or its size.

75 FR 41454 - Publication of State Plan Pursuant to the Help America Vote Act

Science.gov (United States)

2010-07-16

... ELECTION ASSISTANCE COMMISSION Publication of State Plan Pursuant to the Help America Vote Act... plans previously submitted by Alaska. DATES: This notice is effective upon publication in the Federal... programs. In accordance with HAVA Section 254(a)(12), all the state plans submitted for publication provide...

Literature Review of the Effects of Natural Light on Building Occupants

Energy Technology Data Exchange (ETDEWEB)

Edwards, L.; Torcellini, P.

2002-07-01

This paper presents summary findings from a literature search of the term ''daylighting''-using natural light in a building to offset or replace electric lighting. According to the Department of Energy's Office of Building Technology, State and Community Programs 2000 BTS Core Databook, in 1998, commercial buildings consumed 32% of the total electricity in the United States, of which more than one-third went to lighting. Using daylighting systems and turning off the lights will help reduce this energy load. Electrical lighting adds to both the electrical and cooling loads in a commercial building. Utility costs can be decreased when daylighting is properly designed to replace electrical lighting. Along with the importance of energy savings, studies have demonstrated the non-energy-related benefits of daylighting. We compiled the data from books, periodicals, Internet articles, and interviews. The books, periodicals, and Internet articles provided the background information used to identify the main subjects of the paper. The interviews provided us with details related to specific buildings and companies that have integrated daylighting into their buildings.

Building capacity for Health Impact Assessment: Training outcomes from the United States

Energy Technology Data Exchange (ETDEWEB)

Schuchter, Joseph [Berkeley, CA (United States); Rutt, Candace, E-mail: awr8@cdc.gov [Centers for Disease Control and Prevention, Division of Nutrition, Physical Activity and Obesity, 4770 Buford Highway MS/F-77, Atlanta, GA 30341 (United States); Satariano, William A. [University of California Berkeley, School of Public Health, Division of Community Health and Human Development, Berkeley, CA (United States); Seto, Edmund [University of Washington, Department of Environmental and Occupational Health Sciences, Seattle, WA (United States)

2015-01-15

Background: Despite the continued growth of Health Impact Assessment (HIA) in the US, there is little research on HIA capacity-building. A comprehensive study of longer-term training outcomes may reveal opportunities for improving capacity building activities and HIA practice. Methods: We conducted in-depth interviews with HIA trainees in the United States to assess their outcomes and needs. Using a training evaluation framework, we measured outcomes across a spectrum of reaction, learning, behavior and results. Results: From 2006 to 2012, four organizations trained over 2200 people in at least 75 in-person HIA trainings in 29 states. We interviewed 48 trainees, selected both randomly and purposefully. The mean duration between training and interview was 3.4 years. Trainees reported that their training objectives were met, especially when relevant case-studies were used. They established new collaborations at the trainings and maintained them. Training appeared to catalyze more holistic thinking and practice, including a range of HIA-related activities. Many trainees disseminated what they learned and engaged in components of HIA, even without dedicated funding. Going forward, trainees need assistance with quantitative methods, project management, community engagement, framing recommendations, and evaluation. Conclusions: The research revealed opportunities for a range of HIA stakeholders to refine and coordinate training resources, apply a competency framework and leverage complimentary workforce development efforts, and sensitize and build the capacity of communities. - Highlights: • We interviewed HIA trainees in the United States to assess longer-term outcomes. • Training appeared to catalyze a range of beneficial partnerships and activities. • Trainees reported outstanding needs for specific skills and competencies. • There are various opportunities to improve training and capacity-building.

Building capacity for Health Impact Assessment: Training outcomes from the United States

International Nuclear Information System (INIS)

Schuchter, Joseph; Rutt, Candace; Satariano, William A.; Seto, Edmund

2015-01-01

Background: Despite the continued growth of Health Impact Assessment (HIA) in the US, there is little research on HIA capacity-building. A comprehensive study of longer-term training outcomes may reveal opportunities for improving capacity building activities and HIA practice. Methods: We conducted in-depth interviews with HIA trainees in the United States to assess their outcomes and needs. Using a training evaluation framework, we measured outcomes across a spectrum of reaction, learning, behavior and results. Results: From 2006 to 2012, four organizations trained over 2200 people in at least 75 in-person HIA trainings in 29 states. We interviewed 48 trainees, selected both randomly and purposefully. The mean duration between training and interview was 3.4 years. Trainees reported that their training objectives were met, especially when relevant case-studies were used. They established new collaborations at the trainings and maintained them. Training appeared to catalyze more holistic thinking and practice, including a range of HIA-related activities. Many trainees disseminated what they learned and engaged in components of HIA, even without dedicated funding. Going forward, trainees need assistance with quantitative methods, project management, community engagement, framing recommendations, and evaluation. Conclusions: The research revealed opportunities for a range of HIA stakeholders to refine and coordinate training resources, apply a competency framework and leverage complimentary workforce development efforts, and sensitize and build the capacity of communities. - Highlights: • We interviewed HIA trainees in the United States to assess longer-term outcomes. • Training appeared to catalyze a range of beneficial partnerships and activities. • Trainees reported outstanding needs for specific skills and competencies. • There are various opportunities to improve training and capacity-building

77 FR 75425 - Publication of State Plan Pursuant to the Help America Vote Act

Science.gov (United States)

2012-12-20

... ELECTION ASSISTANCE COMMISSION Publication of State Plan Pursuant to the Help America Vote Act... site at www.eac.gov . DATES: This notice is effective upon publication in the Federal Register. FOR... with HAVA Section 254(a)(12), all the State plans submitted for publication provide information on how...

Search and Coherence-Building in Intuition and Insight Problem Solving

Directory of Open Access Journals (Sweden)

Michael Öllinger

2017-05-01

Full Text Available Coherence-building is a key concept for a better understanding of the underlying mechanisms of intuition and insight problem solving. There are several accounts that address certain aspects of coherence-building. However, there is still no proper framework defining the general principles of coherence-building. We propose a four-stage model of coherence-building. The first stage starts with spreading activation restricted by constraints. This dynamic is a well-defined rule based process. The second stage is characterized by detecting a coherent state. We adopted a fluency account assuming that the ease of information processing indicates the realization of a coherent state. The third stage is designated to evaluate the result of the coherence-building process and assess whether the given problem is solved or not. If the coherent state does not fit the requirements of the task, the process re-enters at stage 1. These three stages characterize intuition. For insight problem solving a fourth stage is necessary, which restructures the given representation after repeated failure, so that a new search space results. The new search space enables new coherent states. We provide a review of the most important findings, outline our model, present a large number of examples, deduce potential new paradigms and measures that might help to decipher the underlying cognitive processes.

Here, there and everywhere: emotion and mental state talk in different social contexts predicts empathic helping in toddlers.

Science.gov (United States)

Drummond, Jesse; Paul, Elena F; Waugh, Whitney E; Hammond, Stuart I; Brownell, Celia A

2014-01-01

A growing body of literature suggests that parents socialize early-emerging prosocial behavior across varied contexts and in subtle yet powerful ways. We focus on discourse about emotions and mental states as one potential socialization mechanism given its conceptual relevance to prosocial behavior and its known positive relations with emotion understanding and social-cognitive development, as well as parents' frequent use of such discourse beginning in infancy. Specifically, we ask how parents' emotion and mental state talk (EMST) with their toddlers relates to toddlers' helping and how these associations vary by context. Children aged 18- to 30-months (n = 38) interacted with a parent during book reading and joint play with toys, two everyday contexts that afford parental discussion of emotions and mental states. Children also participated in instrumental and empathic helping tasks. Results revealed that although parents discuss mental states with their children in both contexts, the nature of their talk differs: during book reading parents labeled emotions and mental states significantly more often than during joint play, especially simple affect words (e.g., happy, sad) and explanations or elaborations of emotions; whereas they used more desire talk and mental state words (e.g., think, know) in joint play. Parents' emotion and mental state discourse related to children's empathic, emotion-based helping behavior; however, it did not relate to instrumental, action-based helping. Moreover, relations between parent talk and empathic helping varied by context: children who helped more quickly had parents who labeled emotion and mental states more often during joint play and who elicited this talk more often during book reading. As EMST both varies between contexts and exhibits context-specific associations with empathic prosocial behavior early in development, we conclude that such discourse may be a key form of socialization in emerging prosociality.

Building performance simulation for sustainable buildings

NARCIS (Netherlands)

Hensen, J.L.M.

2010-01-01

This paper aims to provide a general view of the background and current state of building performance simulation, which has the potential to deliver, directly or indirectly, substantial benefits to building stakeholders and to the environment. However the building simulation community faces many

Wood and Other Materials Used to Construct Nonresidential Buildings in the United States 2011 Executive Summary

Science.gov (United States)

David B. McKeever

2013-01-01

The construction of low-rise nonresidential buildings is an important market for lumber, engineered wood products, and structural and nonstructural wood panels in the United States. This report examines low-rise nonresidential buildings of six or fewer stories. Those with more than six stories are normally severely restricted by building codes from being wood framed....

Critical race theory as a bridge in science training: the California State University, Northridge BUILD PODER program.

Science.gov (United States)

Saetermoe, Carrie L; Chavira, Gabriela; Khachikian, Crist S; Boyns, David; Cabello, Beverly

2017-01-01

Unconscious bias and explicit forms of discrimination continue to pervade academic institutions. Multicultural and diversity training activities have not been sufficient in making structural and social changes leading to equity, therefore, a new form of critical consciousness is needed to train diverse scientists with new research questions, methods, and perspectives. The purpose of this paper is to describe Building Infrastructure Leading to Diversity (BUILD); Promoting Opportunities for Diversity in Education and Research (PODER), which is an undergraduate biomedical research training program based on transformative framework rooted in Critical Race Theory (CRT). By employing a CRT-informed curriculum and training in BUILD PODER, students are empowered not only to gain access but also to thrive in graduate programs and beyond. Poder means "power" or "to be able to" in Spanish. Essentially, we are "building power" using students' strengths and empowering them as learners. The new curriculum helps students understand institutional policies and practices that may prevent them from persisting in higher education, learn to become their own advocates, and successfully confront social barriers and instances of inequities and discrimination. To challenge these barriers and sustain campus changes in support of students, BUILD PODER works toward changing campus culture and research mentoring relationships. By joining with ongoing university structures such as the state university Graduation Initiative, we include CRT tenets into the campus dialogue and stimulate campus-wide discussions around institutional change. Strong ties with five community college partners also enrich BUILD PODER's student body and strengthen mentor diversity. Preliminary evaluation data suggest that BUILD PODER's program has enhanced the racial/ethnic consciousness of the campus community, is effective in encouraging more egalitarian and respectful faculty-student relationships, and is a rigorous

Commercial and Multifamily Building Tenant Energy Usage Aggregation and Privacy

Energy Technology Data Exchange (ETDEWEB)

Livingston, Olga V.; Pulsipher, Trenton C.; Wang, Na

2014-11-17

In a number of cities and states, building owners are required to disclose and/or benchmark their building energy use. This requires the building owner to possess monthly whole-building energy usage information, which can be challenging for buildings in which individual tenants have their own utility meters and accounts with the utility. Some utilities and utility regulators have turned to aggregation of customer data as a way to give building owners the whole-building energy usage data while protecting customer privacy. However, no utilities or regulators appear to have conducted a concerted statistical, cybersecurity, and privacy analysis to justify the level of aggregation selected. Therefore, the Tennant Data Aggregation Task was established to help utilities address these issues and provide recommendations as well as a theoretical justification of the aggregation threshold. This study is focused on the use case of submitting data for ENERGY STAR Portfolio Manager (ESPM), but it also looks at other potential use cases for monthly energy consumption data.

"Boss of the United States" Kindergarteners' Concept of Voting: Five Scaffolded Lessons that Build Understanding

Science.gov (United States)

Mulrey, Betty C.; Ackerman, Ann T.; Howson, Patricia H.

2012-01-01

In any U.S. presidential election year, classroom teachers integrate lessons into their curriculum that help students understand their privileges, responsibilities, and rights as good citizens. Teaching about the electoral process and voting in primary classrooms is one way to build a foundation that promotes civic engagement. In this article, the…

State-Building Challenges in a Post-Revolution Libya

Science.gov (United States)

2012-10-01

Studies Re- search Centre (CSRC), and a freelance political risk analyst for North Africa and the Gulf states, based in London, England. Before working...farther afield. Yet, at the time of this writing , the new interim leadership re- mains fragile, with limited capacity and sovereignty, and the...pivotal help to Libya, but such support should be carefully provided. Although the situation on the ground at the time of this writing suggests

75 FR 27743 - Publication of State Plan Pursuant to the Help America Vote Act

Science.gov (United States)

2010-05-18

... ELECTION ASSISTANCE COMMISSION Publication of State Plan Pursuant to the Help America Vote Act... previously submitted by New Mexico. DATES: This notice is effective upon publication in the Federal Register... 27744

11 CFR 100.84 - Office building for State, local, or district party committees or organizations.

Science.gov (United States)

2010-01-01

... 11 Federal Elections 1 2010-01-01 2010-01-01 false Office building for State, local, or district party committees or organizations. 100.84 Section 100.84 Federal Elections FEDERAL ELECTION COMMISSION GENERAL SCOPE AND DEFINITIONS (2 U.S.C. 431) Exceptions to Contributions § 100.84 Office building for...

11 CFR 100.144 - Office building for State, local, or district party committees or organizations.

Science.gov (United States)

2010-01-01

... 11 Federal Elections 1 2010-01-01 2010-01-01 false Office building for State, local, or district party committees or organizations. 100.144 Section 100.144 Federal Elections FEDERAL ELECTION COMMISSION GENERAL SCOPE AND DEFINITIONS (2 U.S.C. 431) Exceptions to Expenditures § 100.144 Office building for...

Reliability of buildings in service limit state for maximum horizontal displacements

Directory of Open Access Journals (Sweden)

A. G. B. Corelhano

Full Text Available Brazilian design code ABNT NBR6118:2003 - Design of Concrete Structures - Procedures - [1] proposes the use of simplified models for the consideration of non-linear material behavior in the evaluation of horizontal displacements in buildings. These models penalize stiffness of columns and beams, representing the effects of concrete cracking and avoiding costly physical non-linear analyses. The objectives of the present paper are to investigate the accuracy and uncertainty of these simplified models, as well as to evaluate the reliabilities of structures designed following ABNT NBR6118:2003[1&] in the service limit state for horizontal displacements. Model error statistics are obtained from 42 representative plane frames. The reliabilities of three typical (4, 8 and 12 floor buildings are evaluated, using the simplified models and a rigorous, physical and geometrical non-linear analysis. Results show that the 70/70 (column/beam stiffness reduction model is more accurate and less conservative than the 80/40 model. Results also show that ABNT NBR6118:2003 [1] design criteria for horizontal displacement limit states (masonry damage according to ACI 435.3R-68(1984 [10] are conservative, and result in reliability indexes which are larger than those recommended in EUROCODE [2] for irreversible service limit states.

Competence-building in foreign subsidiaries: the case of new EU member states

NARCIS (Netherlands)

Filippov, S.; Duysters, G.M.

2011-01-01

This article examines patterns of competence-building in foreign subsidiaries located in new member states of the European Union. Among the theoretical foundations of this paper are the concepts of dynamic capabilities and subsidiary-specific advantages. We consider subsidiary competences as a

Competence building in foreign subsidiaries : The case of new EU member states

NARCIS (Netherlands)

Filippov, S.; Duijsters, G.M.

2011-01-01

This article examines patterns of competence-building in foreign subsidiaries located in new member states of the European Union. Among the theoretical foundations of this paper are the concepts of dynamic capabilities and subsidiary-specific advantages. We consider subsidiary competences as a

Virtual building environments (VBE) - Applying information modeling to buildings

Energy Technology Data Exchange (ETDEWEB)

Bazjanac, Vladimir

2004-06-21

A Virtual Building Environment (VBE) is a ''place'' where building industry project staffs can get help in creating Building Information Models (BIM) and in the use of virtual buildings. It consists of a group of industry software that is operated by industry experts who are also experts in the use of that software. The purpose of a VBE is to facilitate expert use of appropriate software applications in conjunction with each other to efficiently support multidisciplinary work. This paper defines BIM and virtual buildings, and describes VBE objectives, set-up and characteristics of operation. It informs about the VBE Initiative and the benefits from a couple of early VBE projects.

Residential building energy conservation and avoided power plant emissions by urban and community trees in the United States

Science.gov (United States)

David J. Nowak; Nathaniel Appleton; Alexis Ellis; Eric Greenfield

2017-01-01

Urban trees and forests alter building energy use and associated emissions from power plants by shading buildings, cooling air temperatures and altering wind speeds around buildings. Field data on urban trees were combined with local urban/community tree and land cover maps, modeling of tree effects on building energy use and pollutant emissions, and state energy and...

Building Blocks Of Innovation Within A State-Owned Enterprise (Part Two

Directory of Open Access Journals (Sweden)

Betsie van Zyl

2005-11-01

Full Text Available In this article (the second part of a two-part study the focus is on establishing a theoretical framework of state owned enterprise (SOE managers’ espoused theory of building blocks of innovation. A qualitative approach, namely Grounded Theory, supported by Theoretical Sampling, was applied in generating the primary data for the study from different management levels in the SOE. The managers’ espoused theory, based on empirical evidence, shows that innovation consisted of five important building blocks, namely contextual setting; strategic enablers; business enablers; foundational enablers; and human resources; each with its own categories and sub-categories. The study also identified barriers to innovation. An innovation diffusion framework, specifically for implementation in a government context, was proposed.

Evaluation of possibility to increasing sustainability of high-rise buildings through use university intellectual property

Science.gov (United States)

Potekhin, Igor; Mischenko, Valeryi; Mottaeva, Angela; Zheltenkov, Alexander

2018-03-01

In this article explained approach of valuation of intellectual property of Voronezh State Technical University, as her usefulness to increasing the sustainability and ecological safety of high-rise building. High-rise building is main type of buildings in modern cities. They include large volume of material mass, high volume of energy using and high volume of emissions. Using innovation solutions to improving ecology safety of high-rise buildings has large potential to city in whole. Explained in the article methods of calculation of effects helps to value sustainable solutions of present and future generations. Thus usefulness of patents express through usefulness regarding to high-rise building, including for sustainable development.

Building Stronger State Energy Partnerships with the U.S. Department of Energy

Energy Technology Data Exchange (ETDEWEB)

Marks, Kate

2011-09-30

This final technical report details the results of total work efforts and progress made from October 2007 – September 2011 under the National Association of State Energy Officials (NASEO) cooperative agreement DE-FC26-07NT43264, Building Stronger State Energy Partnerships with the U.S. Department of Energy. Major topical project areas in this final report include work efforts in the following areas: Energy Assurance and Critical Infrastructure, State and Regional Technical Assistance, Regional Initiative, Regional Coordination and Technical Assistance, and International Activities in China. All required deliverables have been provided to the National Energy Technology Laboratory and DOE program officials.

Refurbishment and school buildings management in a smart building environment

Science.gov (United States)

Di Giuda, Giuseppe Martino; Villa, Valentina; Tagliabue, Lavinia Chiara; Giana, Paolo Ettore; Rinaldi, Stefano; Ciribini, Angelo Luigi Camillo

2018-05-01

Building Information Modelling is a methodology, which is able to take into account many data, both geometrical and non-geometrical, in order to evaluate at the actual condition of the asset. The project has the scope of evaluating the conditions of different school buildings, in order to develop a way to choose the best-tailored management solution to the owner. A further step is the management and planning of design solutions during the life cycle customized on monitored buildings' conditions. The research work focuses on providing a support decisions concerning the gap between the present building state laws and the current state of the existing buildings. The process will be developed in an expanded BIM environment, using sensors, which will give back the state of the consistency of the actual conditions to enable the buildings to adapt themselves in the best way into their specific constraints and boundaries. The results of the study are (i) a complete workflow to make decision and the possibility to shape the decision process on an objective through a scientific approach, (ii) evaluate the current state of the asset and (iii) manage maintenance in the lifespan. Further development will take in consideration all the aspects related to management of big data environment generated by a smart buildings system.

Building America Best Practices Series - High-Performance Home Technologies: Guide to Determining Climate Regions by County

Energy Technology Data Exchange (ETDEWEB)

Baechler, Michael C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gilbride, Theresa L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Cole, Pam C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hefty, Marye G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ruiz, Kathi [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2013-11-01

This report identifies the climate region of each county in the United States. The report is intended as an aid in helping builders to identify the appropriate climate designation for the counties in which they are building.

State of the stock-What do we know about existing buildings and their future prospects?

International Nuclear Information System (INIS)

Ravetz, Joe

2008-01-01

The UK building stock has seen major changes in the last 50 years, in its form, fabric and function. The context is the expansion of the building stock and built infrastructure, which takes place in most areas at 1-2% per year, with the implication that up to 75% of the dwellings of the year 2050 already exist now. This is a major challenge. The energy performance of much of this stock is generally low, while its economic, social and cultural values are often high. The purpose of this review is to provide a brief outline of the state of knowledge of the existing building stock, and of potential advances in that knowledge. We follow a knowledge mapping approach, set out on several axes. The first is an axis from buildings as physical forms, to buildings as containers of socio-economic activity. Another axis spans between existing buildings, renovations and adaptations, and new buildings. A third axis is that of scale, from building components to large-scale settlements. There are many possible combinations of these parameters. Here we focus on those that are most relevant to the SEMBE goals of sustainable energy management across the whole building stock

Energy and Energy Cost Savings Analysis of the 2015 IECC for Commercial Buildings

Energy Technology Data Exchange (ETDEWEB)

Zhang, Jian [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Xie, YuLong [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Athalye, Rahul A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhuge, Jing Wei [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Rosenberg, Michael I. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hart, Philip R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Liu, Bing [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-06-01

As required by statute (42 USC 6833), DOE recently issued a determination that ANSI/ASHRAE/IES Standard 90.1-2013 would achieve greater energy efficiency in buildings subject to the code compared to the 2010 edition of the standard. Pacific Northwest National Laboratory (PNNL) conducted an energy savings analysis for Standard 90.1-2013 in support of its determination . While Standard 90.1 is the model energy standard for commercial and multi-family residential buildings over three floors (42 USC 6833), many states have historically adopted the International Energy Conservation Code (IECC) for both residential and commercial buildings. This report provides an assessment as to whether buildings constructed to the commercial energy efficiency provisions of the 2015 IECC would save energy and energy costs as compared to the 2012 IECC. PNNL also compared the energy performance of the 2015 IECC with the corresponding Standard 90.1-2013. The goal of this analysis is to help states and local jurisdictions make informed decisions regarding model code adoption.

Energy and Energy Cost Savings Analysis of the 2015 IECC for Commercial Buildings

Energy Technology Data Exchange (ETDEWEB)

Zhang, Jian [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Xie, YuLong [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Athalye, Rahul A. [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Zhuge, Jing Wei [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Rosenberg, Michael I. [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Hart, Philip R. [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Liu, Bing [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States)

2015-09-01

As required by statute (42 USC 6833), DOE recently issued a determination that ANSI/ASHRAE/IES Standard 90.1-2013 would achieve greater energy efficiency in buildings subject to the code compared to the 2010 edition of the standard. Pacific Northwest National Laboratory (PNNL) conducted an energy savings analysis for Standard 90.1-2013 in support of its determination . While Standard 90.1 is the model energy standard for commercial and multi-family residential buildings over three floors (42 USC 6833), many states have historically adopted the International Energy Conservation Code (IECC) for both residential and commercial buildings. This report provides an assessment as to whether buildings constructed to the commercial energy efficiency provisions of the 2015 IECC would save energy and energy costs as compared to the 2012 IECC. PNNL also compared the energy performance of the 2015 IECC with the corresponding Standard 90.1-2013. The goal of this analysis is to help states and local jurisdictions make informed decisions regarding model code adoption.

Energy and Energy Cost Savings Analysis of the IECC for Commercial Buildings

Energy Technology Data Exchange (ETDEWEB)

Zhang, Jian; Athalye, Rahul A.; Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Goel, Supriya; Mendon, Vrushali V.; Liu, Bing

2013-08-30

The purpose of this analysis is to assess the relative energy and energy cost performance of commercial buildings designed to meet the requirements found in the commercial energy efficiency provisions of the International Energy Conservation Code (IECC). Section 304(b) of the Energy Conservation and Production Act (ECPA), as amended, requires the Secretary of Energy to make a determination each time a revised version of ASHRAE Standard 90.1 is published with respect to whether the revised standard would improve energy efficiency in commercial buildings. As many states have historically adopted the IECC for both residential and commercial buildings, PNNL has evaluated the impacts of the commercial provisions of the 2006, 2009, and 2012 editions of the IECC. PNNL also compared energy performance with corresponding editions of ANSI/ASHRAE/IES Standard 90.1 to help states and local jurisdictions make informed decisions regarding model code adoption.

Impact of 2001 Building Technology, state and community programs on United States employment and wage income

International Nuclear Information System (INIS)

MJ Scott; DJ Hostick; DB Elliott

2000-01-01

The Department of Energy Office of Building Technology, State and Community Programs (BTS) is interested in assessing the potential economic impacts of its portfolio of programs on national employment and income. A special purpose version of the IMPLAN input-output model allied In Build is used in this study of all 38 BTS programs included in the FY2001 federal budget. Energy savings, investments, and impacts on U.S. national employment and wage income are reported by program for selected years to the year 2030. Energy savings from these programs have the potential of creating a total of nearly 332,000 jobs and about $5.3 billion in wage income (1995$) by the year 2030. Because the required investments to achieve these savings are capital intensive, the net effect after investment is 304,000 jobs and $5.0 billion

Radon in buildings

International Nuclear Information System (INIS)

Connell, J.J.

1991-01-01

This guide is intended to inform designers, householders and other building owners about the radon problem and to help in deciding if there is need to take any action to reduce radon levels in their homes or other buildings.It explains what radon is, how it enters buildings and what effect it may have on health. Reference is made to some of the usual ways of reducing the level of radon and guidance is given on some sources of assistance

The Specifics of Manifestations of the Interrelation Political and Legal Consciousness and Development Ideology of State-Building in the Times of the Ancient East

Directory of Open Access Journals (Sweden)

Oleksandr V. Krasnokutsky

2014-06-01

Full Text Available The purpose of the work. Investigate the specificity of manifestations of the interrelation political and legal consciousness, and, at the same time, the development of the ideology of state-building as a particular species of theoretically informed practical consciousness, which was used by the creators of state forms in the times of the Ancient East. Methodology. The study is based on the principles of materialist dialectics, historicism, formational and civilizational approaches. The scientific novelty. The obtained results of a study that summarize the scientific novelty can be formulated in the form of abstracts: a identified two lines of ideological interaction on state building in the East in ancient times; b formed a theoretical model of ideological matrix of state-building of the Ancient Orient; c revealed, that the motility of this ideological matrix is consistent with the development of power in the state of those times. Conclusions. Specificity of manifestations of the interrelation political and legal consciousness and development ideology of state-building in the times of the Ancient East – is the existence of two lines of ideological interaction in the field of state-building in a state-organized society: the first line – the unilateral influence of political consciousness on the legal consciousness; the second line – the asymmetric inverse influence of legal consciousness on political consciousness. These two lines of ideological interaction (the unilateral influence of political consciousness on the legal consciousness and the asymmetric inverse influence of legal consciousness on political consciousness have created original ideological matrix of state-building. Within this ideological matrix of state-building in the times of the Ancient East formed corresponding view ideological phenomenon – the ideology of state-building of oriental slave state.

How a Beacon Community Program in New Orleans Helped Create a Better Health Care System by Building Relationships before Technology.

Science.gov (United States)

Khurshid, Anjum; Brown, Lisanne

2014-01-01

In the aftermath of Hurricane Katrina, much of New Orleans' healthcare infrastructure was destroyed. Initial federal funding after the storm expanded primary care services and helped set up medical homes for New Orleans' large uninsured and underinsured population. Following that, the Beacon Community in New Orleans, charged with improving health care through the use of technology, decided the best way to accomplish those goals was to build community partnerships and introduce technology improvements based on their input and on their terms. The purpose of this paper is to describe how those partnerships were wrought, including the innovative use of a conceptual framework, and how they are being sustained; how different technologies were and are being introduced; and what the results have been so far. Past successful community experiences, as well as a proven conceptual framework, were used to help establish community partnerships and governance structures, as well as to demonstrate their linkages. This paper represents a compilation of reports and information from key Beacon leaders, staff and providers and their firsthand experiences in setting up those structures, as well as their conclusions. The community partnerships proved extremely successful in not only devising successful ways to introduce new technology into healthcare settings, but in sustaining those changes by creating a governance structure that has enough fluidity to adapt to changing circumstances. Building and developing community partnerships takes time and effort; however, these relationships are necessary and essential to introducing and sustaining new technologies in a healthcare setting and should be a first step for any organization looking to accomplish such goals.

Molecular Clusters: Nanoscale Building Blocks for Solid-State Materials.

Science.gov (United States)

Pinkard, Andrew; Champsaur, Anouck M; Roy, Xavier

2018-04-17

The programmed assembly of nanoscale building blocks into multicomponent hierarchical structures is a powerful strategy for the bottom-up construction of functional materials. To develop this concept, our team has explored the use of molecular clusters as superatomic building blocks to fabricate new classes of materials. The library of molecular clusters is rich with exciting properties, including diverse functionalization, redox activity, and magnetic ordering, so the resulting cluster-assembled solids, which we term superatomic crystals (SACs), hold the promise of high tunability, atomic precision, and robust architectures among a diverse range of other material properties. Molecular clusters have only seldom been used as precursors for functional materials. Our team has been at the forefront of new developments in this exciting research area, and this Account focuses on our progress toward designing materials from cluster-based precursors. In particular, this Account discusses (1) the design and synthesis of molecular cluster superatomic building blocks, (2) their self-assembly into SACs, and (3) their resulting collective properties. The set of molecular clusters discussed herein is diverse, with different cluster cores and ligand arrangements to create an impressive array of solids. The cluster cores include octahedral M 6 E 8 and cubane M 4 E 4 (M = metal; E = chalcogen), which are typically passivated by a shell of supporting ligands, a feature upon which we have expanded upon by designing and synthesizing more exotic ligands that can be used to direct solid-state assembly. Building from this library, we have designed whole families of binary SACs where the building blocks are held together through electrostatic, covalent, or van der Waals interactions. Using single-crystal X-ray diffraction (SCXRD) to determine the atomic structure, a remarkable range of compositional variability is accessible. We can also use this technique, in tandem with vibrational

BUILDING STRONGER STATE ENERGY PARTNERSHIPS WITH THE U.S. DEPARTMENT OF ENERGY

Energy Technology Data Exchange (ETDEWEB)

Kate Burke

2002-11-01

This technical progress report includes an update of the progress during the second year of cooperative agreement DE-FC26-00NT40802, Building Stronger State Energy Partnerships with the U.S. Department of Energy. The report also describes the barriers in conduct of the effort, and our assessment of future progress and activities.

Building ventilation, state of the art, prospective

International Nuclear Information System (INIS)

1995-10-01

This conference is composed of 21 communications and 21 posters in the domain of building ventilation and indoor air quality; the main themes are: indoor air quality assessment and optimization; performance enhancement and optimization of ventilation systems and equipment; ventilation systems for renovated and rehabilitated buildings; French and European regulations, standardizations and certifications; experimental and numerical simulation studies concerning ventilation systems, air flow, temperature distribution, air quality, radon decontamination, thermal comfort and acoustic levels in buildings

Building Performance Simulation for Sustainable Energy Use in Buildings

NARCIS (Netherlands)

Hensen, J.L.M.

2010-01-01

This paper aims to provide a general view of the background and current state of building performance simulation, which has the potential to deliver, directly or indirectly, substantial benefits to building stakeholders and to the environment. However the building simulation community faces many

Building performance simulation for sustainable building design and operation

NARCIS (Netherlands)

Hensen, J.L.M.

2011-01-01

This paper aims to provide a general view of the background and current state of building performance simulation, which has the potential to deliver, directly or indirectly, substantial benefits to building stakeholders and to the environment. However the building simulation community faces many

Building the Capacity of States to Ensure Inclusion of Rural Communities in State and Local Primary Violence Prevention Planning

Science.gov (United States)

Cook-Craig, Patricia G.; Lane, Karen G.; Siebold, Wendi L.

2010-01-01

Rural, frontier, and geographically isolated communities face unique challenges associated with ensuring that they are equal partners in capacity-building and prevention planning processes at the state and local level despite barriers that can inhibit participation. By their nature, rural, frontier, and geographically isolated communities and…

Solid state physics

CERN Document Server

Grosso, Giuseppe

2013-01-01

Solid State Physics is a textbook for students of physics, material science, chemistry, and engineering. It is the state-of-the-art presentation of the theoretical foundations and application of the quantum structure of matter and materials. This second edition provides timely coverage of the most important scientific breakthroughs of the last decade (especially in low-dimensional systems and quantum transport). It helps build readers' understanding of the newest advances in condensed matter physics with rigorous yet clear mathematics. Examples are an integral part of the text, carefully de

Heath Sector Network Governance and State-building in South Kivu, Democratic Republic of Congo.

Science.gov (United States)

Bwimana, Aembe

2017-12-01

Longstanding patterns of interaction exist between state and non-state actors seeking to improve public health in Democratic Republic of Congo (DRC). DRC is a weak state, and, in many cases, private actors have stepped in to fill the void created by the lack of state health care provision. However, the role of these interactions in creating a governance network in the health sector has been underexplored. Using data from 18 months of qualitative field research, this study aimed to explore governance networks in DRC's health sector, examining how multiple stakeholders work to manage the health system and how the resulting governance network has been relevant for the state-building process. The findings demonstrate that the health sector in South Kivu is emerging as an arena of networked governance based on active partnerships between state institutions and non-state actors. Interactions between state and non-state actors account for the persistence of the health sector in a setting characterized by state weakness. However, networked governance does not function optimally, because, although non-state interventions fill the void where the state falls short, the DRC state has faced the challenge of interacting with partners with fragmented and horizontally competing agendas. Although weak, the shadow of state authority is present in the arena of stakeholders' interactions, as the state plays a determining role by providing a regulatory framework. Overall, the findings show that the interactive engagement of non-state actors contributes to improving institutional capacity through these actors' engagement with state institutions for health system management and institutional development. However, although networked health sector governance does contribute to state capacity, it is difficult to assess the real influence of these interactions on the state-building process in a context of critical fragility, where coordination and alignment have been problematic. © The

Building materials. Stichwort Baustoff

Energy Technology Data Exchange (ETDEWEB)

Rohwer, W

1981-01-01

To handle building materials properly, one must know about their characteristics. This pocket book will be of help: structured like a glossary, it gives brief descriptions of the most common building materials. It is small and handy enough to be a constant companion to resident engineers, foremen, gangers, building tradesmen, and construction workers and an aid in their training. The following groups of building materials are discussed: Natural stone; units for brick walls, floors, and roofs; mortar and concrete (definitions, binders, aggregates, additives, admixtures, mixing water); special types of plaster and rendering; light-weight building boards and wood wool basis; multilayer light-weight building boards; gypsum plasterboards; chimney construction; sewers; thermal insulation and sound section; structural steels; plastics.

The politics of African energy development: Ethiopia's hydro-agricultural state-building strategy and clashing paradigms of water security.

Science.gov (United States)

Verhoeven, Harry

2013-11-13

As key economic, ecological and demographic trends converge to reshape Africa and its relationship with the outside world, a new politics is emerging in the twenty-first century around the water-food-energy nexus, which is central to the continent's relevance in the global economy. On the one hand, Malthusian anxieties are proliferating; pessimists link population growth and growing water scarcity to state failure and 'water wars'. On the other hand, entrepreneurs, sovereign wealth funds and speculators consider Africa's potential in water resources, energy production and food output as one of the last great untapped opportunities for the global economy: Africa is on the brink of an agro-industrial transformation. This article examines how African actors are not merely responding to economic and environmental changes but also thinking politically about water, food and energy security. Many of them are seizing the new opportunities to redefine their national politics, their relationship with local communities and their ties with external players, regionally and globally. Ethiopia's project of hydro-agricultural state-building helps to identify the most important fault lines of this new politics at the national, local and international level. The politics of water security and energy development simultaneously puts African states and their populations on the defensive, as they grapple with huge challenges, but also provides them with unique opportunities to take advantage of a more favourable global configuration of forces.

Building codes as barriers to solar heating and cooling of buildings

Energy Technology Data Exchange (ETDEWEB)

Meeker, F.O. III

1978-04-01

The application of building codes to solar energy systems for heating and cooling of buildings is discussed, using as typical codes the three model building codes most widely adopted by states and localities. Some potential barriers to solar energy systems are found, federal and state programs to deal with these barriers are discussed, and alternatives are suggested. To remedy this, a federal program is needed to encourage state adoption of standards and acceptance of certification of solar systems for code approval, and to encourage revisions to codes based on model legislation prepared for the federal government by the model codes groups.

Requirements for existing buildings

DEFF Research Database (Denmark)

Thomsen, Kirsten Engelund; Wittchen, Kim Bjarne

This report collects energy performance requirements for existing buildings in European member states by June 2012.......This report collects energy performance requirements for existing buildings in European member states by June 2012....

Gratitude and prosocial behavior: helping when it costs you.

Science.gov (United States)

Bartlett, Monica Y; DeSteno, David

2006-04-01

The ability of the emotion gratitude to shape costly prosocial behavior was examined in three studies employing interpersonal emotion inductions and requests for assistance. Study 1 demonstrated that gratitude increases efforts to assist a benefactor even when such efforts are costly (i.e., hedonically negative), and that this increase differs from the effects of a general positive affective state. Additionally, mediational analyses revealed that gratitude, as opposed to simple awareness of reciprocity norms, drove helping behavior. Furthering the theory that gratitude mediates prosocial behavior, Study 2 replicated the findings of Study 1 and demonstrated gratitude's ability to function as an incidental emotion by showing it can increase assistance provided to strangers. Study 3 revealed that this incidental effect dissipates if one is made aware of the true cause of the emotional state. Implications of these findings for the role of gratitude in building relationships are discussed.

Self-help and help-seeking for communication disability in Ghana: implications for the development of communication disability rehabilitation services.

Science.gov (United States)

Wylie, Karen; McAllister, Lindy; Davidson, Bronwyn; Marshall, Julie; Amponsah, Clement; Bampoe, Josephine Ohenewa

2017-12-29

In low and middle-income countries, such as Ghana, communication disability is poorly recognised and rehabilitation services for people with communication disability are limited. As rehabilitation services for communication disability develop, and the profession of speech-language pathology grows, it is important to consider how services can most appropriately respond to the needs and preferences of the community. Understanding the ways in which people currently self-help and seek help for communication disability is central to developing services that build on existing local practices and are relevant to the community. A qualitative descriptive survey was used to explore likely self-help and help-seeking behaviours for communication disability, in Accra, Ghana. The survey required participants to describe responses to hypothetical scenarios related to communication disability. A mix of theoretical sampling and convenience sampling was used. Qualitative content analysis was used to analyse data and develop categories and subcategories of reported self-help behaviours and sources of help and advice for communication disability. One hundred and thirty-six participants completed the survey. Results indicated that community members would be likely to engage in a variety self-help strategies in response to communication disability. These included working directly with a person with a communication disability to attempt to remediate a communication impairment, altering physical and communication environments, changing attitudes or care practices, educating themselves about the communication disability, providing resources, and responding in spiritual ways. Participants indicated that they would seek help for communication disability across a range of sectors - including the Western healthcare, religious, and traditional sectors. Understanding existing community actions to self-help and help-seek may allow emerging communication rehabilitation services, including the

Inventory of U.S.-led International Activities on Building Energy Efficiency Initial Findings

Energy Technology Data Exchange (ETDEWEB)

Delgado, Alison; Evans, Meredydd

2010-04-01

Several U.S. Government agencies promote energy efficiency in buildings internationally. The types and scope of activities vary by agency. Those with the largest role include the U.S. Agency for International Development (USAID), the U.S. Department of State and the Environmental Protection Agency (EPA). Both USAID and the Department of State have a substantial presence overseas, which may present some complementarities with the Department of Energy’s efforts to reach out to other countries. Generally speaking, USAID focuses on capacity building and policy issues; the Department of State focuses on broad diplomatic efforts and some targeted grants in support of these efforts, and EPA has more targeted roles linked to ENERGY STAR appliances and a few other activities. Several additional agencies are also involved in trade-related efforts to promote energy efficiency in buildings. These include the Department of Commerce, the Export-Import Bank, the Overseas Private Investment Corporation and the Trade and Development Agency (TDA). This initial synthesis report is designed to summarize broad trends and activities relating to international cooperation on energy efficiency in buildings, which can help the U.S. Department of Energy (DOE) in developing its own strategy in this area. The Pacific Northwest National Laboratory will develop a more complete synthesis report later in 2010 as it populates a database on international projects on building energy efficiency.

Building eCommerce sites with Drupal commerce cookbook

CERN Document Server

Carter, Richard

2013-01-01

Building eCommerce Sites with Drupal Commerce Cookbook is written in a helpful, practical style with numerous hands-on recipes to help you build attractive eCommerce sites.This book is primarily for store owners and web designers with little or no experience of Drupal and Drupal Commerce who want to build and customise a store in Drupal Commerce. You will have a basic knowledge of websites, but you don't need to be familiar with Drupal or PHP. However, this book would also suit experienced Drupal and Ubercart users who want to migrate to or build a Drupal Commerce store

National Security Strategy of the United States of America

Science.gov (United States)

2017-12-18

build new partnerships based on the principle of reciprocity. Economic tools—including sanctions, anti-mon- ey- laundering and anti-corruption...parency, and help ensure that money reaches its intended destination. INCENTIVIZE REFORMS: The United States will use diplomacy and assistance to

Designing an Earthquake-Resistant Building

Science.gov (United States)

English, Lyn D.; King, Donna T.

2016-01-01

How do cross-bracing, geometry, and base isolation help buildings withstand earthquakes? These important structural design features involve fundamental geometry that elementary school students can readily model and understand. The problem activity, Designing an Earthquake-Resistant Building, was undertaken by several classes of sixth- grade…

CULTURAL AND LEGAL FACTORS OF OPTIMIZATION OF THE IDEOLOGY OF STATE-BUILDING IN UKRAINE

Directory of Open Access Journals (Sweden)

O. V. Krasnokutskyi

2014-12-01

Full Text Available The Purpose is to investigate the legal cultural phenomenon in the riches of the contours of its essence, raising the level of this phenomenon as part of the system of determinants of the optimization of ideology of state-building in modern Ukraine. Methodology. The study is based on the principles of materialist dialectics and the principles of historicism, social determinism, complexity. The scientific novelty. The cultural and legal factors of optimization of the ideology of state-building are conceptually considered for the first time in modern Ukraine; three methodological points that should be targeted in the definition of «legal culture» are outlined; the definition of legal culture is improved; a working template program of improvement and increase of the level of legal culture in contemporary Ukrainian society is developed; four key conceptual areas of the program are outlined. Conclusions. Legal culture can be defined as a separate category to mark the legal system which was historically formed and the institutions of a state-organized society that are correlated with it, and also the legal knowledge and motives, forms, techniques and methods of legal activities, values, estimates with the necessity inherent to every people, class, nation, community groups, to the individual person at a certain stage of their development. Rise of the level of legal awareness is one of the leading systematic factors, cultural and code keys to optimizing the development of state-building ideology in the conditions of today's Ukraine. The program for the improvement and enhancement of legal culture in contemporary Ukrainian society is composed of four major conceptual areas: the growth of basic legal literacy; the rise of their legal awareness; the increase of theoretical justification of the existing legal reality, the prospects for its future development, the increase of the efficiency of the legal theory; progressive formation of legal ideology.

Building Bounce-Back Kids

Science.gov (United States)

Lloyd-Zannini, Lou

2011-01-01

In this article, the author talks about building resilience--that ability to push through hardship to success, to rebound from failure, and to "keep on keepin' on" when things seem impossible. The author assert that lots of gifted and talented kids need help building their resilience. In today's world, when striving for mediocrity can seem like…

Charting a path forward: building AGU's capacity to help foster scientist-decision maker engagement

Science.gov (United States)

Vano, J. A.; Behar, D. H.; Mote, P.; Ferguson, D. B.; Pandya, R.

2016-12-01

Most research proposals, papers, and presentation abstracts begin with the motivation that the new science presented will benefit society. Behind this, beyond making good on the promises to get funding, is a sincere effort to contribute our knowledge and talent to build a better (safer, sustainable, more resilient) world. For this to happen, however, the science needs to be connected to people in communities who make decisions. While this happens in a variety of ways, often for research to be most useful to society, engagement with decision makers should occur at the beginning and throughout the research process. Increasingly this is being recognized as important, as evidenced by the growing number of boundary organizations (e.g., U.S. Department of the Interior's Climate Science Centers, NOAA's Regional Integrated Sciences and Assessment programs). Even within AGU, in recent years there has been a number of new activities and networks that suggest a growing community of practice for those doing work at the science-society interface (e.g., The Thriving Earth Exchange, the Water and Society Technical Committee in the Hydrology Section). In this presentation, we highlight what these activities are and share insights from those involved. We evaluate trends (e.g., have the number of abstracts on this topic increased?) and present responses from AGU members to questions on where this community of practice should go next (e.g., What is the most important task the AGU community should do to improve decision maker-scientist engagement?). The goal of this presentation is to promote a conversation about how the AGU community can be better prepared to foster engagement with decision makers that will lead to more actionable science. This will help us ensure our science is useful to society, fulfilling our motivations, and arguably responsibilities, both individually and as a community. It will also serve to prepare new scientists for a broader range of careers beyond

State-building, migration and economic development on the frontiers of northern Afghanistan and southern Tajikistan

Directory of Open Access Journals (Sweden)

Christian Bleuer

2012-01-01

Full Text Available The Kunduz River Valley of northern Afghanistan and the Vakhsh River Valley of southern Tajikistan followed what initially appear to be vastly different trajectories. Despite these two adjacent areas having had much in common throughout many periods of history, the present-day region of northern Afghanistan was eventually taken under the control of the Afghan state while the areas north of the Amu Darya and Panj River were to become part of the Soviet Union. However, instead of a divergent course of development and state-building, these two regions were subjected to very similar patterns of agricultural development and migration policies. “Empty” areas were to be populated, by force if necessary, wetlands were to be drained for agriculture, and cotton farming was to become pre-eminent. The end result in both areas was the creation of a socially diverse and economically significant region that was fully integrated into the modern state’s economy and politics. This article analyzes and compares the motives and implementation of the state-building projects in both of these now domestically important regions and finds remarkable similarities despite the obvious differences in the structure of the Afghan and Soviet states.

Commercial Buildings Characteristics, 1992

Energy Technology Data Exchange (ETDEWEB)

1994-04-29

Commercial Buildings Characteristics 1992 presents statistics about the number, type, and size of commercial buildings in the United States as well as their energy-related characteristics. These data are collected in the Commercial Buildings Energy Consumption Survey (CBECS), a national survey of buildings in the commercial sector. The 1992 CBECS is the fifth in a series conducted since 1979 by the Energy Information Administration. Approximately 6,600 commercial buildings were surveyed, representing the characteristics and energy consumption of 4.8 million commercial buildings and 67.9 billion square feet of commercial floorspace nationwide. Overall, the amount of commercial floorspace in the United States increased an average of 2.4 percent annually between 1989 and 1992, while the number of commercial buildings increased an average of 2.0 percent annually.

Research and Development Needs for Building-Integrated Solar Technologies

Energy Technology Data Exchange (ETDEWEB)

none,

2014-01-01

The Building Technologies Office (BTO) has identified Building Integrated Solar Technologies (BIST) as a potentially valuable piece of the comprehensive pathway to help achieve its goal of reducing energy consumption in residential and commercial buildings by 50% by the year 2030. This report helps to identify the key research and development (R&D) needs that will be required for BIST to make a substantial contribution toward that goal. BIST include technologies for space heating and cooling, water heating, hybrid photovoltaic-thermal systems (PV/T), active solar lighting, and building-integrated photovoltaics (BIPV).

Building thermography as a tool in energy audits and building commissioning procedure

Science.gov (United States)

Kauppinen, Timo

2007-04-01

A Building Commissioning-project (ToVa) was launched in Finland in the year 2003. A comprehensive commissioning procedure, including the building process and operation stage was developed in the project. This procedure will confirm the precise documentation of client's goals, definition of planning goals and the performance of the building. It is rather usual, that within 1-2 years after introduction the users complain about the defects or performance malfunctions of the building. Thermography is one important manual tool in verifying the thermal performance of the building envelope. In this paper the results of one pilot building (a school) will be presented. In surveying the condition and energy efficiency of buildings, various auxiliary means are needed. We can compare the consumption data of the target building with other, same type of buildings by benchmarking. Energy audit helps to localize and determine the energy saving potential. The most general and also most effective auxiliary means in monitoring the thermal performance of building envelopes is an infrared camera. In this presentation some examples of the use of thermography in energy audits are presented.

Building Industry Enterprises Logistic System according to their Life-cycle and Organizational Adaptation

Directory of Open Access Journals (Sweden)

Natalya Voznenko

2016-01-01

Full Text Available This article presents a survey of the Ukrainian machinery-building industry enterprises performance in 2012-2014 due to the state of their logistic systems development and companies’ life-cycle stage. The review of existing theoretical approaches shows the range of possible criteria for evaluation at each level of the industry, enterprise and product. The conducted research evaluates the Ukrainian machinery-building industry and the companies that create that potential. The peculiarities of the organizational adaptation of the above mentioned enterprises and the developed recommendations will help to establish an adaptive management and gain enterprises’ market competitiveness.

Tips on Helping Your Child Build Relationships

Science.gov (United States)

... Support Federal Policy Home Visiting Paid Family Leave Physical Health Social and Emotional Health State and Local Policy ... son is still too young to get a pet. When is the best time to get a dog? Publication The Emotional Life of the ... Article Sexual Health and Safety Become a Member Ready to join? ...

The application, benefits and challenges of retrofitting the existing buildings

Science.gov (United States)

Khairi, Muhammad; Jaapar, Aini; Yahya, Zaharah

2017-11-01

Sustainable development has been the main topic of debate for years in some countries such as United Kingdom, United State of America and Malaysia. Depletion of natural resources, global warming, economics uncertainty and health issues are some of the reasons behind sustainable development movements, it is not just a political debate in the parliament but more towards collective works among sectors in order to minimizing the negative impact of development to the environment and other living organism. Retrofit an existing building is one of the solutions to reduce the dependency on constructing new buildings. There are huge numbers of existing building stocks that suitable to be retrofitted such as historical buildings, offices, residential, warehouse, factories, vacant buildings and other historical buildings. Therefore, the aim of this research is to provide information on the application, benefits and challenges of retrofitting an existing building. Two buildings were chosen as case studies following by site visits and observation to the buildings. The data were then compared in a table form. Primary and secondary sources were also used for this research. The application of retrofit should be promoted across the construction and conservation industries since it has significant tangible and intangible benefits. It is one of the most environmentally friendly and efficient solutions to optimize the energy performance and could also helps to extend the life of the existing building or historical buildings while ensuring optimum thermal comfort for the occupants which leads to higher productivity.

Green building challenge 2002 in Canada : an overview

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-02-01

The Green Building Challenge (GBC) in Canada was launched to help the building community meet environmental challenges and improve the environmental performance of buildings. Tools have been made available to the building industry to make informed environmental choices during the conception design stage of a project. The tools help architects, researchers and policy analysts in choosing material mixes and other design options that will minimize a building's potential life cycle environmental impacts and promote sustainable development. Green buildings involve the complete structure and envelope, including cladding, insulation, gypsum wall board, roofing and windows. The type of building and its location is also considered. Long term sustainability also considers energy use and emissions related to a building's energy system. This presentation described the following 3 projects which were selected for assessment in the GBC-2002: (1) the Mayo School in Mayo, Yukon Territory, (2) the Jackson-Triggs Winery in Niagara-on-the-Lake, Ontario, and (3) the Red River College in Winnipeg, Manitoba. The GBC-2002 Canadian Team nominated them as the best buildings being designed in Canada.10 figs.

Building Evidence for Health: Green Buildings, Current Science, and Future Challenges.

Science.gov (United States)

Cedeño-Laurent, J G; Williams, A; MacNaughton, P; Cao, X; Eitland, E; Spengler, J; Allen, J

2018-04-01

Civilizational challenges have questioned the status quo of energy and material consumption by humans. From the built environment perspective, a response to these challenges was the creation of green buildings. Although the revolutionary capacity of the green building movement has elevated the expectations of new commercial construction, its rate of implementation has secluded the majority of the population from its benefits. Beyond reductions in energy usage and increases in market value, the main strength of green buildings may be the procurement of healthier building environments. Further pursuing the right to healthy indoor environments could help the green building movement to attain its full potential as a transformational public health tool. On the basis of 40 years of research on indoor environmental quality, we present a summary of nine environment elements that are foundational to human health. We posit the role of green buildings as a critical research platform within a novel sustainability framework based on social-environmental capital assets.

Building Energy Benchmarking in India: an Action Plan for Advancing the State-of-the-Art

Energy Technology Data Exchange (ETDEWEB)

Sarraf, Saket [Centre for Environmental Planning and Technology (CEPT) Univ., Ahmedabad (India); Anand, Shilpi [Centre for Environmental Planning and Technology (CEPT) Univ., Ahmedabad (India); Shukla, Yash [Centre for Environmental Planning and Technology (CEPT) Univ., Ahmedabad (India); Mathew, Paul [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Singh, Reshma [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2014-06-01

This document describes an action plan for advancing the state of the art of commercial building energy benchmarking in the Indian context. The document is primarily intended for two audiences: (a) Research and development (R&D) sponsors and researchers can use the action plan to frame, plan, prioritize and scope new energy benchmarking R&D in order to ensure that their research is market relevant; (b) Policy makers and program implementers engaged in the deployment of benchmarking and building efficiency rating programmes can use the action plan for policy formulation and enforcement .

Compliance with building energy regulations for new-build dwellings

International Nuclear Information System (INIS)

Pan, Wei; Garmston, Helen

2012-01-01

Despite increasingly stringent building energy regulations worldwide, non-compliance exists in practice. This paper examines the profile of compliance with building energy regulations for new-build dwellings. In total 404 new-build dwellings completed in the UK from 2006 to 2009 were investigated. Only a third of these dwellings were evidenced as being compliant with Building Regulations Part L (England and Wales). Such low compliance casts a serious concern over the achievability of the UK Government's target for all new-build homes to be ‘zero carbon’ from 2016. Clearly evidenced was a lack of knowledge of Part L and its compliance requirements among the supply and building control sides of new-build dwellings. The results also indicate that the compliance profile was influenced by factors including Standard Assessment Procedure (UK Government's methodology for energy efficiency) calculation submissions, learning and experience of builders and building controls with Part L, use of Part L1A checklist, the introduction of energy performance certificate (EPC), build method, dwelling type, and project size. Better compliance was associated with flats over houses and timber frame over masonry. The use of EPC and Part L1A checklist should be encouraged. Key to addressing the lack of compliance with building energy regulations is training. -- Highlights: ► There exists a lack of compliance, worldwide, with building energy regulations. ► The implementation of England and Wales building energy regulations is problematic. ► Training, learning and experience of builders and building control are critical. ► Energy performance certificate and Part L 2006 checklist helped achieve compliance. ► Flats achieved better compliance over houses; and timber frame over masonry.

Designing domestic buildings for future summers: Attitudes and opinions of building professionals

International Nuclear Information System (INIS)

Gul, Mehreen S.; Menzies, Gillian F.

2012-01-01

A changing climate will produce summertime overheating where conventional domestic building design approaches do not adequately address future warming risk. This risk cannot be fully identified and avoided unless future climate information and building related adaptation measures are considered. The Low Carbon Futures project is developing a tool that uses UKCP09 climate projections input to predict dwelling overheating risks. To enhance the usefulness of this tool for the building industry, and to better understand current building design processes, interviews were conducted with building professionals, allowing industry preferences for the tool to be sought and to provide clearer indications of proposed outcomes. This paper examines results from a questionnaire, focus groups and semi-structured interviews with building industry professionals. The research shows that the housing industry maintains adherence to traditional designing methods where overheating, whether current or future, is not considered a serious concern. No design stage detailed overheating assessments are currently undertaken to reduce the UK's increased room air-conditioner sales, despite drives for low energy/zero carbon homes. The collated feedback will help tailor the tool and its eventual outputs, with this paper attempting to converge on a set of recommendations for low carbon dwelling design with reduced overheating risk. - Highlights: ► Interviews to gauge attitudes of building professionals towards future warming. ► Client requirements, capital costs and regulations take priority in typical practice. ► No actions are currently taken to prevent overheating risks in the housing sector. ► Overheating risks in housing can be tackled by the use of dynamic modelling. ► The LCF tool further helps to adapt a dwelling to reduce future overheating risks.

Building Energy Monitoring and Analysis

Energy Technology Data Exchange (ETDEWEB)

Hong, Tianzhen; Feng, Wei; Lu, Alison; Xia, Jianjun; Yang, Le; Shen, Qi; Im, Piljae; Bhandari, Mahabir

2013-06-01

This project aimed to develop a standard methodology for building energy data definition, collection, presentation, and analysis; apply the developed methods to a standardized energy monitoring platform, including hardware and software, to collect and analyze building energy use data; and compile offline statistical data and online real-time data in both countries for fully understanding the current status of building energy use. This helps decode the driving forces behind the discrepancy of building energy use between the two countries; identify gaps and deficiencies of current building energy monitoring, data collection, and analysis; and create knowledge and tools to collect and analyze good building energy data to provide valuable and actionable information for key stakeholders.

Small Commercial Building Re-tuning: A Primer

Energy Technology Data Exchange (ETDEWEB)

Cort, Katherine A.; Hostick, Donna J.; Underhill, Ronald M.; Fernandez, Nicholas; Katipamula, Srinivas

2013-09-30

To help building owners and managers address issues related to energy-efficient operation of small buildings, DOE has developed a Small Building Re-tuning training curriculum. This "primer" provides additional background information to understand some of the concepts presented in the Small Building Re-tuning training. The intent is that those who are less familiar with the buidling energy concepts will review this material before taking the building re-tuning training class.

Indoor air quality in green buildings: A case-study in a residential high-rise building in the northeastern United States.

Science.gov (United States)

Xiong, Youyou; Krogmann, Uta; Mainelis, Gediminas; Rodenburg, Lisa A; Andrews, Clinton J

2015-01-01

Improved indoor air quality (IAQ) is one of the critical components of green building design. Green building tax credit (e.g., New York State Green Building Tax Credit (GBTC)) and certification programs (e.g., Leadership in Energy & Environmental Design (LEED)) require indoor air quality measures and compliance with allowable maximum concentrations of common indoor air pollutants. It is not yet entirely clear whether compliance with these programs results in improved IAQ and ultimately human health. As a case in point, annual indoor air quality measurements were conducted in a residential green high-rise building for five consecutive years by an industrial hygiene contractor to comply with the building's GBTC requirements. The implementation of green design measures resulted in better IAQ compared to data in references of conventional homes for some parameters, but could not be confirmed for others. Relative humidity and carbon dioxide were satisfactory according to existing standards. Formaldehyde levels during four out of five years were below the most recent proposed exposure limits found in the literature. To some degree, particulate matter (PM) levels were lower than that in studies from conventional residential buildings. Concentrations of Volatile Organic Compounds (VOCs) with known permissible exposure limits were below levels known to cause chronic health effects, but their concentrations were inconclusive regarding cancer health effects due to relatively high detection limits. Although measured indoor air parameters met all IAQ maximum allowable concentrations in GBTC and applicable LEED requirements at the time of sampling, we argue that these measurements were not sufficient to assess IAQ comprehensively because more sensitive sampling/analytical methods for PM and VOCs are needed; in addition, there is a need for a formal process to ensure rigor and adequacy of sampling and analysis methods. Also, we suggest that a comprehensive IAQ assessment should

Literature Review of Data on the Incremental Costs to Design and Build Low-Energy Buildings

Energy Technology Data Exchange (ETDEWEB)

Hunt, W. D.

2008-05-14

This document summarizes findings from a literature review into the incremental costs associated with low-energy buildings. The goal of this work is to help establish as firm an analytical foundation as possible for the Building Technology Program's cost-effective net-zero energy goal in the year 2025.

Safe and Sustainable Tall Buildings - State of the Art

Directory of Open Access Journals (Sweden)

Mendis P.

2012-01-01

Full Text Available Tall buildings are becoming very popular around the world. Asia will have most of the tall buildings in this century. Both safety and sustainability aspects are important in planning and designing these buildings. The design and construction of tall buildings present many challenges for the design team, from engineers, architect through to the builder. Although structural systems could be developed and construction solutions could be found to design and construct very tall buildings in excess of 1 km (even 1 mile, other aspects such as fire and egress, long-term movements, environmental wind and perception of motion (including damping for dynamic effects, transportation (lifts issues, sustainability, durability and maintenance will govern and may even restrict the heights. Current practices and important issues related to design of safe and sustainable design of tall buildings are discussed in this paper.

Continuous commissioning of buildings: A case study of a campus building in Denmark

DEFF Research Database (Denmark)

Markoska, Elena; Jradi, Muhyiddine; Jørgensen, Bo Nørregaard

2016-01-01

The general trend in building commissioning is that the commissioning is often either insufficiently comprehensive in its execution, or it is not conducted at all. As such, it has been observed that buildings often will contain faults that have not been discovered during the commissioning phase....... In this paper, we present a framework for continuous verification and commissioning of a building with a set of performance tests that are able to monitor the performance and functionality with a daily granularity. The performance tests are run on a newly constructed campus building in Denmark, over the course...... of three months, and the results of the performance tests are presented within a dashboard application, which helps verify that the building is performing accordingly to its original design intent....

Building performance simulation as a design tool for refurbishment of buildings

NARCIS (Netherlands)

Hensen, J.L.M.; Bartak, M.; Drkal, F.; Dunovska, T.; Lain, M.; Matuska, T.; Schwarzer, J.; Sourek, B.; Bednar, T.

2004-01-01

This paper attempts to outline the current state-of-the-art regarding the use of building performance simulation as a design tool for refurbishment of buildings. This is illus-trated by means of three recent studies for conversion of historical buildings (an early 20th century factory, and a water

Building Procurement

DEFF Research Database (Denmark)

Andersson, Niclas

2007-01-01

evolves from a simple establishment of a contractual relationship to a central and strategic part of construction. The authors relate to cultural, ethical and social and behavioural sciences as the fundamental basis for analysis and understanding of the complexity and dynamics of the procurement system......‘The procurement of construction work is complex, and a successful outcome frequently elusive’. With this opening phrase of the book, the authors take on the challenging job of explaining the complexity of building procurement. Even though building procurement systems are, and will remain, complex...... despite this excellent book, the knowledge, expertise, well-articulated argument and collection of recent research efforts that are provided by the three authors will help to make project success less elusive. The book constitutes a thorough and comprehensive investigation of building procurement, which...

Possible Futures: Using Frameworks of Knowledge to Help Year 9 Connect Past, Present and Future

Science.gov (United States)

Nuttall, Dan

2013-01-01

How can we help pupils integrate history into coherent "Big Pictures" or mental frameworks? Building on traditions of classroom research and theorising reported in earlier editions of Teaching History, Dan Nuttall reports how his department set out to help Year 9 build a coherent big picture of twentieth-century history that would…

Encouraging Teachers to Build Collaborations with Researchers; Examples From the Classroom (Invited)

Science.gov (United States)

Kane, M.

2013-12-01

Bringing experts into our schools allows for highly engaging lessons, encourages career thinking, adds authenticity to the topic, and allows student's questions to be answered by experts. Researchers can physically visit classrooms or appear through presentation technologies, such as Skype, or Google Hangouts. Virtual visits allow students to see laboratories and field sites. Collaborating with scientists builds the connective tissue that helps all educators and our students learn more deeply. When K-12 teachers collaborate with scientists and graduate students, teachers learn more science, and scientists learn more teaching. This growth of background knowledge is a win-win situation and helps us meet the expectations of the Common Core State Standards. Teachers need to feel encouraged to contact their local or regional scientists for support. Reaching out into the universities to make contact with polar scientists or graduate students is a good place to start. Building professional networks allows PI's to address the 'broader impact' requirement on many grant applications, and helps spread the university's work in the polar regions out to the general public. These collaborations also give teachers expert insights and current data to build authentic lessons, and excite their students to seek careers in the sciences. This presentation will focus on three completed interactive opportunities I have built with researchers in my classroom. Students adding daily sediment to their sediment core, after communications from the field with scientist Heidi Roop in Alaska.

Building the capacity for public engagement with science in the United States.

Science.gov (United States)

Guston, David H

2014-01-01

This paper reviews efforts of the Center for Nanotechnology in Society at Arizona State University (CNS-ASU) to begin to build capacity for public engagement with science in the United States. First, the paper sets a context in the US of the current challenges to democracy and for science. It then reviews the literature on the accomplishments of the National Citizens' Technology Forum (NCTF) on nanotechnology and human enhancement, held in 2008, as well as some caveats that emerged from that enterprise. It concludes with a brief discussion of two kinds of activities - participation in the World Wide Views process organized by the Danish Board of Technology, and methodological innovations that include more concrete and experiential modes of engagement - that have spun off from the NCTF.

Building Social Web Applications

CERN Document Server

Bell, Gavin

2009-01-01

Building a web application that attracts and retains regular visitors is tricky enough, but creating a social application that encourages visitors to interact with one another requires careful planning. This book provides practical solutions to the tough questions you'll face when building an effective community site -- one that makes visitors feel like they've found a new home on the Web. If your company is ready to take part in the social web, this book will help you get started. Whether you're creating a new site from scratch or reworking an existing site, Building Social Web Applications

11 CFR 300.35 - Office buildings.

Science.gov (United States)

2010-01-01

... 11 Federal Elections 1 2010-01-01 2010-01-01 false Office buildings. 300.35 Section 300.35 Federal... FUNDS State, District, and Local Party Committees and Organizations § 300.35 Office buildings. (a) General provision. For the purchase or construction of its office building, a State or local party...

Sustainable building organisation

NARCIS (Netherlands)

Schmid, P.

1998-01-01

Sustainable Development and Sustainable Building is mainly a question of (human) environmentally-conscious Organisation and Management Criteria are needed in order to capture the best practices in the field. Therefore we developed modells and methods, which help to choose the most adequate

RCrane: semi-automated RNA model building

International Nuclear Information System (INIS)

Keating, Kevin S.; Pyle, Anna Marie

2012-01-01

RCrane is a new tool for the partially automated building of RNA crystallographic models into electron-density maps of low or intermediate resolution. This tool helps crystallographers to place phosphates and bases into electron density and then automatically predicts and builds the detailed all-atom structure of the traced nucleotides. RNA crystals typically diffract to much lower resolutions than protein crystals. This low-resolution diffraction results in unclear density maps, which cause considerable difficulties during the model-building process. These difficulties are exacerbated by the lack of computational tools for RNA modeling. Here, RCrane, a tool for the partially automated building of RNA into electron-density maps of low or intermediate resolution, is presented. This tool works within Coot, a common program for macromolecular model building. RCrane helps crystallographers to place phosphates and bases into electron density and then automatically predicts and builds the detailed all-atom structure of the traced nucleotides. RCrane then allows the crystallographer to review the newly built structure and select alternative backbone conformations where desired. This tool can also be used to automatically correct the backbone structure of previously built nucleotides. These automated corrections can fix incorrect sugar puckers, steric clashes and other structural problems

Geothermal Retrofit of Illinois National Guard's State headquarters Building

Energy Technology Data Exchange (ETDEWEB)

Lee, Mark

2015-04-27

The goal of this project was to assess the feasibility of utilizing mine water as a heat sink for a geothermal heat pump system to heat and cool the 74,000 sq. ft. Illinois National Guard State Headquarters’ building in Springfield Illinois. If successful, this type of system would be less expensive to install than a traditional closed loop geothermal (ground source) heat pump system by significantly reducing the size of the well field, thus shortening or eliminate the payback period compared to a conventional system. In the end, a conventional ground loop was used for the project.

WASTE TREATMENT BUILDING SYSTEM DESCRIPTION DOCUMENT

Energy Technology Data Exchange (ETDEWEB)

F. Habashi

2000-06-22

The Waste Treatment Building System provides the space, layout, structures, and embedded subsystems that support the processing of low-level liquid and solid radioactive waste generated within the Monitored Geologic Repository (MGR). The activities conducted in the Waste Treatment Building include sorting, volume reduction, and packaging of dry waste, and collecting, processing, solidification, and packaging of liquid waste. The Waste Treatment Building System is located on the surface within the protected area of the MGR. The Waste Treatment Building System helps maintain a suitable environment for the waste processing and protects the systems within the Waste Treatment Building (WTB) from most of the natural and induced environments. The WTB also confines contaminants and provides radiological protection to personnel. In addition to the waste processing operations, the Waste Treatment Building System provides space and layout for staging of packaged waste for shipment, industrial and radiological safety systems, control and monitoring of operations, safeguards and security systems, and fire protection, ventilation and utilities systems. The Waste Treatment Building System also provides the required space and layout for maintenance activities, tool storage, and administrative facilities. The Waste Treatment Building System integrates waste processing systems within its protective structure to support the throughput rates established for the MGR. The Waste Treatment Building System also provides shielding, layout, and other design features to help limit personnel radiation exposures to levels which are as low as is reasonably achievable (ALARA). The Waste Treatment Building System interfaces with the Site Generated Radiological Waste Handling System, and with other MGR systems that support the waste processing operations. The Waste Treatment Building System interfaces with the General Site Transportation System, Site Communications System, Site Water System, MGR

WASTE TREATMENT BUILDING SYSTEM DESCRIPTION DOCUMENT

International Nuclear Information System (INIS)

Habashi, F.

2000-01-01

The Waste Treatment Building System provides the space, layout, structures, and embedded subsystems that support the processing of low-level liquid and solid radioactive waste generated within the Monitored Geologic Repository (MGR). The activities conducted in the Waste Treatment Building include sorting, volume reduction, and packaging of dry waste, and collecting, processing, solidification, and packaging of liquid waste. The Waste Treatment Building System is located on the surface within the protected area of the MGR. The Waste Treatment Building System helps maintain a suitable environment for the waste processing and protects the systems within the Waste Treatment Building (WTB) from most of the natural and induced environments. The WTB also confines contaminants and provides radiological protection to personnel. In addition to the waste processing operations, the Waste Treatment Building System provides space and layout for staging of packaged waste for shipment, industrial and radiological safety systems, control and monitoring of operations, safeguards and security systems, and fire protection, ventilation and utilities systems. The Waste Treatment Building System also provides the required space and layout for maintenance activities, tool storage, and administrative facilities. The Waste Treatment Building System integrates waste processing systems within its protective structure to support the throughput rates established for the MGR. The Waste Treatment Building System also provides shielding, layout, and other design features to help limit personnel radiation exposures to levels which are as low as is reasonably achievable (ALARA). The Waste Treatment Building System interfaces with the Site Generated Radiological Waste Handling System, and with other MGR systems that support the waste processing operations. The Waste Treatment Building System interfaces with the General Site Transportation System, Site Communications System, Site Water System, MGR

Environmental indicators for buildings

DEFF Research Database (Denmark)

Dammann, S.

Whenever we shop, the products we consider buying are labelled with the economical price we have to pay if we want to purchase them - an important parameter in our decisions as purchasers. The increrasing awareness for environmental limits and backlashes of human activities also in the building...... sector have fostered the wish to define 'the ecological price' of a building as a help for environmental conscious decision-making. In a social constructivist approach this Ph.D. thesis looks across and beyond the manifold existing approaches for environmental indicators for buildings. It acknowledges...... in the Netherlands. It identifies lines of conflict and areas of consent betweeen the relevant actors and elaborates scenarios for a possible closure of ongoing debate about environmental indicators for buildings....

Automatic generation and simulation of urban building energy models based on city datasets for city-scale building retrofit analysis

International Nuclear Information System (INIS)

Chen, Yixing; Hong, Tianzhen; Piette, Mary Ann

2017-01-01

Highlights: •Developed methods and used data models to integrate city’s public building records. •Shading from neighborhood buildings strongly influences urban building performance. •A case study demonstrated the workflow, simulation and analysis of building retrofits. •CityBES retrofit analysis feature provides actionable information for decision making. •Discussed significance and challenges of urban building energy modeling. -- Abstract: Buildings in cities consume 30–70% of total primary energy, and improving building energy efficiency is one of the key strategies towards sustainable urbanization. Urban building energy models (UBEM) can support city managers to evaluate and prioritize energy conservation measures (ECMs) for investment and the design of incentive and rebate programs. This paper presents the retrofit analysis feature of City Building Energy Saver (CityBES) to automatically generate and simulate UBEM using EnergyPlus based on cities’ building datasets and user-selected ECMs. CityBES is a new open web-based tool to support city-scale building energy efficiency strategic plans and programs. The technical details of using CityBES for UBEM generation and simulation are introduced, including the workflow, key assumptions, and major databases. Also presented is a case study that analyzes the potential retrofit energy use and energy cost savings of five individual ECMs and two measure packages for 940 office and retail buildings in six city districts in northeast San Francisco, United States. The results show that: (1) all five measures together can save 23–38% of site energy per building; (2) replacing lighting with light-emitting diode lamps and adding air economizers to existing heating, ventilation and air-conditioning (HVAC) systems are most cost-effective with an average payback of 2.0 and 4.3 years, respectively; and (3) it is not economical to upgrade HVAC systems or replace windows in San Francisco due to the city’s mild

Building state capacity in Russia: A case study of energy sector reform, 1992--1998

Science.gov (United States)

Kim, Younkyoo

This study seeks an explanation for the neglect of state building in Russia. The major hypothesis is that dependence on external rent leads to the weakness of the state. Three intervening variables---transaction costs, bargaining power of the state, and discount rates---are posited to explain variance on the dependent variable, the weakness of the state. Based on the exploration of three dimensions of energy sector reform, the dissertation argues that in the short run resource rents may be the only reliable and adequate source of finance for the Russian government. The division of resource rents among the many claimants (state vs. business, state vs. society, Moscow vs. regions, and Russia vs. foreign companies), it submits, will pose a stringent test of the viability of democratic governance in Russia. The dissertation concludes that some evidence indicates that Russia has in fact met the characteristics of the rentier state. The greater reliance on a large resource sector for revenue has led to high transaction costs of tax collection, weak bargaining power of the state, and high discount rates of government officials in Russia.

A program plan for photovoltaic buildings in Florida

International Nuclear Information System (INIS)

Ventre, Gerard G.

1999-01-01

The Florida Photovoltaic (PV) Buildings Program will conduct a variety of application experiments over the next decade to gather information that will help define the costs, value and benefits of using photovoltaics with buildings. Four main sources of revenue will support the program: a photovoltaic system buy down (from the present through December 2001), green pricing (present to 2010 and beyond), buy up by end users, and contracts, grants and other subsidies. To give the program sufficient breadth, three different application experiments are planned for each of nine target groups. The data and information from these experiments will help reduce or eliminate key barriers to the commercialisation of photovoltaic buildings. (Author)

Evaluation and analysis of energy consumption in office buildings; Feldstudie zum Energieverbrauch von Buerogebaeuden

Energy Technology Data Exchange (ETDEWEB)

Maas, Stefan; Scholzen, Frank; Thewes, Andreas; Waldmann, Daniele [Universitaet Luxemburg, Campus Kirchberg, Fakultaet fuer Naturwissenschaften, Technologie und Kommunikation, Forschungseinheit Ingenieurswissenschaften, Luxemburg (Luxembourg); Zuerbes, Arno [Fachhochschule Bingen, Fachbereich Technik, Informatik und Wirtschaft, Bingen am Rhein (Germany)

2011-06-15

During the last years the national energy consumption of Luxembourg shifted noticeable towards the building sector. In 1990 71 % of the total domestic end energy consumption was ascribed to industrial sector and only 20 % to the building sector. The distribution changed significantly and in 2005 the energy consumption dedicated to industrial sector represented only 44 %, transport 25 % and the tertiary sector 31 % [1], which includes private and public households as well as non-residential buildings. The buildings account for 40 % of total energy consumption in the EU and there is an enormous energy saving potential. Therefore the EUdirective 2002/91/EG [2] requires from all EU Member States to save energy in this sector. Hence the energy saving of buildings present an essential part of climate protection. Furthermore the new directive 2010/31/EG [3] requires from the Member States to tighten national standards and to draw up national plans for increasing the number of nearly zero-energy buildings. But for a better understanding of energy flows in buildings and to develop energy saving concepts as well as to estimate possible energy savings of buildings a detailed analysis of energy consumption databases is an important precondition. The following field survey monitors 47 office buildings in Luxembourg. A separate gathering of electricity, heat and cooling energy consumptions allowed a detailed energetic analysis. A statistical analysis and interpretation of new buildings differentiated by energy sources as well as definition of energy relevant parameters like the window ratio, the construction method, the type of use or the kind of technical installations show the problems of typical existing office buildings. A final extrapolation to the population of all new office buildings in Luxembourg helps to estimate the energy saving potential.

Forecast Mekong 2012: Building scientific capacity

Science.gov (United States)

Stefanov, James E.

2012-01-01

In 2009, U.S. Secretary of State Hillary R. Clinton joined the Foreign Ministers of Cambodia, Laos, Thailand, and Vietnam in launching the Lower Mekong Initiative to enhance U.S. engagement with the countries of the Lower Mekong River Basin in the areas of environment, health, education, and infrastructure. The U.S. Geological Survey Forecast Mekong supports the Lower Mekong Initiative through a variety of activities. The principal objectives of Forecast Mekong include the following: * Build scientific capacity in the Lower Mekong Basin and promote cooperation and collaboration among scientists working in the region. * Provide data, information, and scientific models to help resource managers there make informed decisions. * Produce forecasting and visualization tools to support basin planning, including climate change adaptation. The focus of this product is Forecast Mekong accomplishments and current activities related to the development of scientific capacity at organizations and institutions in the region. Building on accomplishments in 2010 and 2011, Forecast Mekong continues to enhance scientific capacity in the Lower Mekong Basin with a suite of activities in 2012.

INL High Performance Building Strategy

Energy Technology Data Exchange (ETDEWEB)

Jennifer D. Morton

2010-02-01

High performance buildings, also known as sustainable buildings and green buildings, are resource efficient structures that minimize the impact on the environment by using less energy and water, reduce solid waste and pollutants, and limit the depletion of natural resources while also providing a thermally and visually comfortable working environment that increases productivity for building occupants. As Idaho National Laboratory (INL) becomes the nation’s premier nuclear energy research laboratory, the physical infrastructure will be established to help accomplish this mission. This infrastructure, particularly the buildings, should incorporate high performance sustainable design features in order to be environmentally responsible and reflect an image of progressiveness and innovation to the public and prospective employees. Additionally, INL is a large consumer of energy that contributes to both carbon emissions and resource inefficiency. In the current climate of rising energy prices and political pressure for carbon reduction, this guide will help new construction project teams to design facilities that are sustainable and reduce energy costs, thereby reducing carbon emissions. With these concerns in mind, the recommendations described in the INL High Performance Building Strategy (previously called the INL Green Building Strategy) are intended to form the INL foundation for high performance building standards. This revised strategy incorporates the latest federal and DOE orders (Executive Order [EO] 13514, “Federal Leadership in Environmental, Energy, and Economic Performance” [2009], EO 13423, “Strengthening Federal Environmental, Energy, and Transportation Management” [2007], and DOE Order 430.2B, “Departmental Energy, Renewable Energy, and Transportation Management” [2008]), the latest guidelines, trends, and observations in high performance building construction, and the latest changes to the Leadership in Energy and Environmental Design

Four Essential Practices for Building Trust

Science.gov (United States)

Combs, Julie Peterson; Harris, Sandra; Edmonson, Stacey

2015-01-01

The presence of trust can enhance an organization's efforts to fulfill its mission, and the lack of trust can constrict those efforts. The authors offer four essential guidelines to help school leaders communicate in a way that builds trust. Build trust by understanding trust. Trusted leaders demonstrate care, character, and competence in their…

Historic Buildings and Modern Technology: The California State Library Remodels for Automation--A Case Study.

Science.gov (United States)

Hudson, Kathy

1987-01-01

Provides background on the California State Library, a description of the Library and Courts Building, and a summary of automation objectives. Concerns in renovation to accommodate a modern library are then discussed: (1) environment; (2) electrical and telephone circuitry; (3) data and voice communications; (4) physical factors; and (5)…

Joint China-United States Report for Year 1 Insulation Materials and Systems Project Area Clean Energy Research Center Building Energy Efficiency (CERC-BEE)

Energy Technology Data Exchange (ETDEWEB)

Stovall, Therese K [ORNL; Biswas, Kaushik [ORNL; Song, Bo [China Academy of Building Research; Zhang, Sisi [China Academy of Building Research

2012-08-01

In November of 2009, the presidents of China and the U.S. announced the establishment of the Clean Energy Research Center (CERC). This broad research effort is co-funded by both countries and involves a large number of research centers and universities in both countries. One part of this program is focused on improving the energy efficiency of buildings. One portion of the CERC-BEE was focused on building insulation systems. The research objective of this effort was to Identify and investigate candidate high performance fire resistant building insulation technologies that meet the goal of building code compliance for exterior wall applications in green buildings in multiple climate zones. A Joint Work Plan was established between researchers at the China Academy of Building Research and Oak Ridge National Laboratory. Efforts in the first year under this plan focused on information gathering. The objective of this research program is to reduce building energy use in China via improved building insulation technology. In cold regions in China, residents often use inefficient heating systems to provide a minimal comfort level within inefficient buildings. In warmer regions, air conditioning has not been commonly used. As living standards rise, energy consumption in these regions will increase dramatically unless significant improvements are made in building energy performance. Previous efforts that defined the current state of the built environment in China and in the U.S. will be used in this research. In countries around the world, building improvements have typically followed the implementation of more stringent building codes. There have been several changes in building codes in both the U.S. and China within the last few years. New U.S. building codes have increased the amount of wall insulation required in new buildings. New government statements from multiple agencies in China have recently changed the requirements for buildings in terms of energy efficiency and

Early Building Design

DEFF Research Database (Denmark)

Østergård, Torben; Jensen, Rasmus Lund; Maagaard, Steffen

2017-01-01

Highlights •Development of a design methodology that can handle the vast design space in early building design. •A global design space is modelled from extensive Monte Carlo simulations. •Sensitivity analysis methods applied to guide decision-makers. •Interactive visualizations help the multi-act...

Contaminant ingress into multizone buildings: An analytical state-space approach

KAUST Repository

Parker, Simon; Coffey, Chris; Gravesen, Jens; Kirkpatrick, James; Ratcliffe, Keith; Lingard, Bryan; Nally, James

2013-01-01

The ingress of exterior contaminants into buildings is often assessed by treating the building interior as a single well-mixed space. Multizone modelling provides an alternative way of representing buildings that can estimate concentration time

Partnered Decisions? U.S. Couples and Medical Help-Seeking for Infertility

Science.gov (United States)

Johnson, Katherine M.; Johnson, David R.

2009-01-01

We examined male partners' influence on the decision to seek medical help for infertility using the National Study of Fertility Barriers. Building upon an existing help-seeking framework, we incorporated characteristics of both partners from 219 heterosexual couples who had ever perceived a fertility problem. In logistic regression analyses, we…

Energy Performance of Verandas in the Building Retrofit Process

Directory of Open Access Journals (Sweden)

Rossano Albatici

2016-05-01

Full Text Available Passive solar elements for both direct and indirect gains, are systems used to maintain a comfortable living environment while saving energy, especially in the building energy retrofit and adaptation process. Sunspaces, thermal mass and glazing area and orientation have been often used in the past to guarantee adequate indoor conditions when mechanical devices were not available. After a period of neglect, nowadays they are again considered as appropriate systems to help face environmental issues in the building sector, and both international and national legislation takes into consideration the possibility of including them in the building planning tools, also providing economic incentives. Their proper design needs dynamic simulation, often difficult to perform and time consuming. Moreover, results generally suffer from several uncertainties, so quasi steady-state procedures are often used in everyday practice with good results, but some corrections are still needed. In this paper, a comparative analysis of different solutions for the construction of verandas in an existing building is presented, following the procedure provided by the slightly modified and improved Standard EN ISO 13790:2008. Advantages and disadvantages of different configurations considering thermal insulation, windows typology and mechanical ventilation systems are discussed and a general intervention strategy is proposed. The aim is to highlight the possibility of using sunspaces in order to increase the efficiency of the existing building stock, considering ease of construction and economic viability.

Improvisational Theater Games: Performatory Team-Building Activities

Science.gov (United States)

Ingalls, Joan S.

2018-01-01

This article describes five improvisational theater games for building "teams" in the classroom and on the sports field. Particular attention is given to understanding how teams must challenge the hyper-individuality of modern culture. Improvisational theater games for team building are designed to help participants find a balance…

Computer-facilitated community building for E-learning

NARCIS (Netherlands)

Nijholt, Antinus; Petrushin, V.; Kommers, Petrus A.M.; Kinshuk, X.; Galeev, I.

2002-01-01

This is a short survey of tools and ideas that are helpful for community building for E-learning. The underlying assumption in the survey is that community building for students and teachers in a joint learning and teaching situation is useful. Especially student-student interaction in student life

Towards Nearly Zero Energy Buildings in Europe: A Focus on Retrofit in Non-Residential Buildings

Directory of Open Access Journals (Sweden)

Delia D’Agostino

2017-01-01

Full Text Available Buildings are the focus of European (EU policies aimed at a sustainable and competitive low-carbon economy by 2020. Reducing energy consumption of existing buildings and achieving nearly zero energy buildings (NZEBs are the core of the Energy Efficiency Directive (EED and the recast of the Energy Performance of Building Directive (EPBD. To comply with these requirements, Member States have to adopt actions to exploit energy savings from the building sector. This paper describes the differences between deep, major and NZEB renovation and then it provides an overview of best practice policies and measures to target retrofit and investment related to non-residential buildings. Energy requirements defined by Member States for NZEB levels are reported comparing both new and existing residential and non-residential buildings. The paper shows how the attention given to refurbishment of NZEBs increased over the last decade, but the achievement of a comprehensive implementation of retrofit remains one of main challenges that Europe is facing.

Hawaii-Okinawa Building Evaluations

Energy Technology Data Exchange (ETDEWEB)

Metzger, I.; Salasovich, J.

2013-05-01

NREL conducted energy evaluations at the Itoman City Hall building in Itoman, Okinawa Prefecture, Japan, and the Hawaii State Capitol building in Honolulu, Hawaii. This report summarizes the findings from the evaluations, including the best practices identified at each site and opportunities for improving energy efficiency and renewable energy. The findings from this evaluation are intended to inform energy efficient building design, energy efficiency technology, and management protocols for buildings in subtropical climates.

Building and Testing with Gradle

CERN Document Server

Berglund, Tim

2011-01-01

Build and test software written in Java and many other languages with Gradle, the open source project automation tool that's getting a lot of attention. This concise introduction provides numerous code examples to help you explore Gradle, both as a build tool and as a complete solution for automating the compilation, test, and release process of simple and enterprise-level applications. Discover how Gradle improves on the best ideas of Ant, Maven, and other build tools, with standards for developers who want them and lots of flexibility for those who prefer less structure. Use Gradle with Gr

Higher Education Technology and Research: Creating Excellence through State Investments

Science.gov (United States)

New Jersey Commission on Higher Education, 2004

2004-01-01

Colleges and universities in New Jersey play a critical role in building and sustaining economic prosperity and quality of life in the state and beyond. Through advancements in technology and research, higher education helps to create new jobs, improve the workforce, develop new knowledge, and boost the overall economy. This report summarizes…

Risk management for buildings -- Has the time come?

Energy Technology Data Exchange (ETDEWEB)

Berry, D.L.; Hunter, R.L.

1997-08-01

There are both incentives and challenges for applying formal risk management processes to buildings and other structures, including bridges, highways, dams, stadiums, shopping centers, and private dwellings. Based on an assessment of several issues, the authors conclude that for certain types of buildings and structures the time has come for the use of a formal risk-management approach, including probabilistic risk assessment methods, to help identify dominant risks to public health, safety, and security and to help manage these risks in a cost-effective manner.

MOISTURE-BUFFERING CHARACTERISTICS OF BUILDING MATERIALS

Directory of Open Access Journals (Sweden)

Young Cheol Choi

2016-05-01

Full Text Available The humidity level of indoor air is an important factor influencing the air quality and energy consumption of buildings, as well as the durability of building components. Indoor humidity levels depend on several factors, such as moisture sources, air flow, and the adsorption/desorption properties of materials. The moisture-buffering characteristics of building materials that are in contact with indoor air may help moderate the variations of indoor humidity, especially in the summer and winter. In this study, the moisture adsorption/desorption properties of building materials were investigated experimentally and numerically. These properties can be used to characterize the ability of building materials to exchange moisture with the indoor environment. This study indicates that a building material surface resistivity was the main factor creating variations of moisture buffering.

Lessons Learned From a Healthful Vending Pilot Program in Delaware State Agency Buildings, 2011–2012

Science.gov (United States)

Lessard, Laura; Trotter, Mary

2014-01-01

Introduction Changes in food availability in worksites can result in changes in eating behavior and weight status. Nemours Health and Prevention Services, in conjunction with partners in Delaware, conducted a 6-month pilot program to assess the feasibility and impact of requiring that 75% of the items in vending machines in 3 state agency buildings have healthful items. Methods We collected process evaluation data from October 2011 through April 2012 by taking weekly photographs of all machines to record the number of healthful items available. Outcomes were measured through sales reports designed to enumerate changes in number and type of items sold and overall profit from each building. Results We found challenges in fully implementing the 75% goal. In one of the 3 buildings, all machines were compliant within 7 weeks; in another, full compliance did not occur until week 19. Despite these challenges, the number of items sold in each machine was comparable to numbers from the previous year. Total profits from each building varied across the 3 sites and during the pilot. One building had a 51% increase in profits in January 2012 compared with profits averaged for January 2011 and January 2010. In contrast, monthly profit at another building fluctuated from an increase of 6% to a loss of 30%. Conclusion Overall, our results suggest that collaborative efforts can result in a feasible intervention with little negative influence on profits. PMID:25144678

Text Maps: Helping Students Navigate Informational Texts.

Science.gov (United States)

Spencer, Brenda H.

2003-01-01

Notes that a text map is an instructional approach designed to help students gain fluency in reading content area materials. Discusses how the goal is to teach students about the important features of the material and how the maps can be used to build new understandings. Presents the procedures for preparing and using a text map. (SG)

CERN helps Grid cmputing into the mainstream

CERN Multimedia

Moran, Nuala

2006-01-01

CERN, the European Laboratory for Particle Physics, has launched the seocnd phase of Openlab, its partnership with IT companies for the development of advanced computing facilities. The industrial partners in this phase, Hewlett Packard, Intel and Oracle, will help build on the experience from the last three years when Openlab worked on cluster and Grid computing (1 page)

Case-study of thermo active building systems in Japanese climate

NARCIS (Netherlands)

Li, R.; Yoshidomi, T.; Ooka, R.; Olesen, B.

2015-01-01

Thermo active building systems (TABS) have been applied in office buildings as a promising energy efficient solution in many European countries. The utilization of building thermal mass helps to provide high quality thermal environments with less energy consumption. However, the concept of TABS is

Building Integrated Photovoltaics: A Concise Description of the Current State of the Art and Possible Research Pathways

Directory of Open Access Journals (Sweden)

Bjørn Petter Jelle

2015-12-01

Full Text Available Building integrated photovoltaics (BIPV offer an aesthetical, economical and technical solution to integrate solar cells harvesting solar radiation to produce electricity within the climate envelopes of buildings. Photovoltaic (PV cells may be mounted above or onto the existing or traditional roofing or wall systems. However, BIPV systems replace the outer building envelope skin, i.e., the climate screen, hence serving simultanously as both a climate screen and a power source generating electricity. Thus, BIPV may provide savings in materials and labor, in addition to reducing the electricity costs. Hence, for the BIPV products, in addition to specific requirements put on the solar cell technology, it is of major importance to have satisfactory or strict requirements of rain tightness and durability, where building physical issues like e.g., heat and moisture transport in the building envelope also have to be considered and accounted for. This work, from both a technological and scientific point of view, summarizes briefly the current state-of-the-art of BIPV, including both BIPV foil, tiles, modules and solar cell glazing products, and addresses possible research pathways for BIPV in the years to come.

Problems of Technology of Energy-Saving Buildings and Their Impact on Energy Efficiency in Buildings

Science.gov (United States)

Kwasnowski, Pawel; Fedorczak-Cisak, Malgorzata; Knap, Katarzyna

2017-10-01

Introduction of EPBD in legislation of the EU member states caused that buildings must meet very stringent requirements of thermal protection and energy efficiency. On the basis of EPBD provisions, EU Member States introduce standard of NZEB (Nearly Zero-Energy Buildings). Such activities cause a need for new, innovative materials and technologies, and new approaches to design, construction and retrofitting of buildings. Indispensable is the precise coordination of the design of structure and technical installations of building, which may be provided in an integrated design process in the system BIM. Good coordination and cooperation of all contractors during the construction phase is also necessary. The article presents the problems and the new methodology for the design, construction and use of energy efficient buildings in terms of energy saving technologies, including discussion of the significant impact of the automation of technical installations on the building energy efficiency.

Diverse interpretations of confidence building

International Nuclear Information System (INIS)

Macintosh, J.

1998-01-01

This paper explores the variety of operational understandings associated with the term 'confidence building'. Collectively, these understandings constitute what should be thought of as a 'family' of confidence building approaches. This unacknowledged and generally unappreciated proliferation of operational understandings that function under the rubric of confidence building appears to be an impediment to effective policy. The paper's objective is to analyze these different understandings, stressing the important differences in their underlying assumptions. In the process, the paper underlines the need for the international community to clarify its collective thinking about what it means when it speaks of 'confidence building'. Without enhanced clarity, it will be unnecessarily difficult to employ the confidence building approach effectively due to the lack of consistent objectives and common operating assumptions. Although it is not the intention of this paper to promote a particular account of confidence building, dissecting existing operational understandings should help to identify whether there are fundamental elements that define what might be termed 'authentic' confidence building. Implicit here is the view that some operational understandings of confidence building may diverge too far from consensus models to count as meaningful members of the confidence building family. (author)

State-of-the-art Review : Vol. 2B. Integrated Building Concepts

DEFF Research Database (Denmark)

van der Aa, Ad; Andresen, Inger; Asada, Hideo

an overview of 23 case study buildings from 9 countries with integrated building concepts. The overview provides descriptions of the buildings and their contexts, a description of the integrated energy systems, and the overall performance of the building with respect to energy, indoor environment and costs......The purpose of this report is to give examples of integrated building concepts and related available performance data and information. The report does not aspire to give a complete overview of all possible integrated building concepts and processes. The buildings included in the report have been...... selected according to the knowledge of the participants in the project, as characteristic examples of the concepts and the challenges they represent. The report will be a common basis for the research and development work that is going to be carried out within the IEA Annex 44 project. The report contains...

Integrating Building Information Modeling and Green Building Certification: The BIM-LEED Application Model Development

Science.gov (United States)

Wu, Wei

2010-01-01

Building information modeling (BIM) and green building are currently two major trends in the architecture, engineering and construction (AEC) industry. This research recognizes the market demand for better solutions to achieve green building certification such as LEED in the United States. It proposes a new strategy based on the integration of BIM…

MANAGING BUILDING CHECKIST PLANS USING BUSCLIS

Directory of Open Access Journals (Sweden)

M. Zulfahmi Toh

2016-02-01

Full Text Available This paper presents the software namely Building Submission Checklist System (BUSCLIS. It has been developed to manage the submission of building checklist plans process in the construction industry. BUSCLIS helps to simplify the management for acquiescence data of building plan approval for the Local Authority (LA and Country Planning in Malaysia through the web based system. BUSCLIS facilitates user through the computerization forms, which provides fast, efficient and effective service to the engineer, architect and contractor. Relevant and timely information manage by sophisticated BUSCLIS with the database management system MySQL

Guidelines for Using Building Information Modeling for Energy Analysis of Buildings

Directory of Open Access Journals (Sweden)

Thomas Reeves

2015-12-01

Full Text Available Building energy modeling (BEM, a subset of building information modeling (BIM, integrates energy analysis into the design, construction, and operation and maintenance of buildings. As there are various existing BEM tools available, there is a need to evaluate the utility of these tools in various phases of the building lifecycle. The goal of this research was to develop guidelines for evaluation and selection of BEM tools to be used in particular building lifecycle phases. The objectives of this research were to: (1 Evaluate existing BEM tools; (2 Illustrate the application of the three BEM tools; (3 Re-evaluate the three BEM tools; and (4 Develop guidelines for evaluation, selection and application of BEM tools in the design, construction and operation/maintenance phases of buildings. Twelve BEM tools were initially evaluated using four criteria: interoperability, usability, available inputs, and available outputs. Each of the top three BEM tools selected based on this initial evaluation was used in a case study to simulate and evaluate energy usage, daylighting performance, and natural ventilation for two academic buildings (LEED-certified and non-LEED-certified. The results of the case study were used to re-evaluate the three BEM tools using the initial criteria with addition of the two new criteria (speed and accuracy, and to develop guidelines for evaluating and selecting BEM tools to analyze building energy performance. The major contribution of this research is the development of these guidelines that can help potential BEM users to identify the most appropriate BEM tool for application in particular building lifecycle phases.

The Current State of Poison Control Centers in Pakistan and the Need for Capacity Building

Directory of Open Access Journals (Sweden)

Nadeem Khan

2014-03-01

Full Text Available Background: Chemical exposure is a major health problem globally. Poison control centers (PCCs play a leading role both in developed and developing countries in the prevention and control of poisonous chemical exposures. In this study, we aimed to assess the current state of PCCs in Pakistan and highlight capacity building needs in these centers. Methods: A cross-sectional survey of the two registered PCCs was done during August – December 2011. Necessary services of the PCCs were evaluated and the data were recorded on a predesigned checklist. Results: Both PCCs are affiliated to a tertiary care hospital. Clinical services to poisoned patients were available 24 hours a day / 7 days a week. Information on common local products was available to poison center staff. Both centers were involved in undergraduate and post graduate teaching. Telephone poison information service was not available in either of centers. There was a limited capacity for qualitative and analytical toxicology. Common antidotes were available. There were limited surveillance activities to capture toxic risks existing in the community and also a deficiency was observed in chemical disaster planning. Conclusion: PCCs in Pakistan need capacity building for specialized training in toxicology, toxicovigilance, chemical disaster planning, analytical laboratory tests and telephone service for consultation in poisoning cases.   How to cite this article: Khan NU, Mir MU, Khan UR, Khan AR, Ara J, Raja K, et al. The Current State of Poison Control Centers in Pakistan and the Need for Capacity Building. Asia Pac J Med Toxicol 2014;3:31-5.

A Model for Sustainable Building Energy Efficiency Retrofit (BEER) Using Energy Performance Contracting (EPC) Mechanism for Hotel Buildings in China

Science.gov (United States)

Xu, Pengpeng

Hotel building is one of the high-energy-consuming building types, and retrofitting hotel buildings is an untapped solution to help cut carbon emissions contributing towards sustainable development. Energy Performance Contracting (EPC) has been promulgated as a market mechanism for the delivery of energy efficiency projects. EPC mechanism has been introduced into China relatively recently, and it has not been implemented successfully in building energy efficiency retrofit projects. The aim of this research is to develop a model for achieving the sustainability of Building Energy Efficiency Retrofit (BEER) in hotel buildings under the Energy Performance Contracting (EPC) mechanism. The objectives include: • To identify a set of Key Performance Indicators (KPIs) for measuring the sustainability of BEER in hotel buildings; • To identify Critical Success Factors (CSFs) under EPC mechanism that have a strong correlation with sustainable BEER project; • To develop a model explaining the relationships between the CSFs and the sustainability performance of BEER in hotel building. Literature reviews revealed the essence of sustainable BEER and EPC, which help to develop a conceptual framework for analyzing sustainable BEER under EPC mechanism in hotel buildings. 11 potential KPIs for sustainable BEER and 28 success factors of EPC were selected based on the developed framework. A questionnaire survey was conducted to ascertain the importance of selected performance indicators and success factors. Fuzzy set theory was adopted in identifying the KPIs. Six KPIs were identified from the 11 selected performance indicators. Through a questionnaire survey, out of the 28 success factors, 21 Critical Success Factors (CSFs) were also indentified. Using the factor analysis technique, the 21 identified CSFs in this study were grouped into six clusters to help explain project success of sustainable BEER. Finally, AHP/ANP approach was used in this research to develop a model to

How IAEA NKM Approaches Support the Building and Sustaining Nuclear Capacity in Member States

International Nuclear Information System (INIS)

Grosbois, John de

2014-01-01

Implementing NKM in nuclear organizations by helping Member State organizations to: • develop policy and programmes; • identify critical knowledge; • evaluate knowledge gaps, knowledge loss risks; • implement effective approaches to prevent knowledge gaps and loss; • Integrate KM thinking and practices into the management system

Robust Building Energy Load Forecasting Using Physically-Based Kernel Models

Directory of Open Access Journals (Sweden)

Anand Krishnan Prakash

2018-04-01

Full Text Available Robust and accurate building energy load forecasting is important for helping building managers and utilities to plan, budget, and strategize energy resources in advance. With recent prevalent adoption of smart-meters in buildings, a significant amount of building energy consumption data became available. Many studies have developed physics-based white box models and data-driven black box models to predict building energy consumption; however, they require extensive prior knowledge about building system, need a large set of training data, or lack robustness to different forecasting scenarios. In this paper, we introduce a new building energy forecasting method based on Gaussian Process Regression (GPR that incorporates physical insights about load data characteristics to improve accuracy while reducing training requirements. The GPR is a non-parametric regression method that models the data as a joint Gaussian distribution with mean and covariance functions and forecast using the Bayesian updating. We model the covariance function of the GPR to reflect the data patterns in different forecasting horizon scenarios, as prior knowledge. Our method takes advantage of the modeling flexibility and computational efficiency of the GPR while benefiting from the physical insights to further improve the training efficiency and accuracy. We evaluate our method with three field datasets from two university campuses (Carnegie Mellon University and Stanford University for both short- and long-term load forecasting. The results show that our method performs more accurately, especially when the training dataset is small, compared to other state-of-the-art forecasting models (up to 2.95 times smaller prediction error.

Radon: the building industry view

International Nuclear Information System (INIS)

Farnham, K.G.R.

1992-01-01

Guidance on radon preventive measures in new dwellings is covered by the Building Regulations, and adequate guidance has been published by the Building Research Establishment. This is a satisfactory state of affairs which, unfortunately, is not the case for remedial work in existing buildings. Work in existing buildings should be incorporated in Regulations and adequate funding should be provided by government for the training of builders. (Author)

Self-help conferences for people who stutter: a qualitative investigation.

Science.gov (United States)

Trichon, Mitchell; Tetnowski, John

2011-12-01

Self-help activities for people who stutter (PWS) have been gaining in popularity; however, there is a scarcity of evidence to support their utility in stuttering management. The purpose of this investigation was to understand the lived experience of individuals who attended a self-help conference(s) for PWS from the perspective of a PWS to learn its potential utility in stuttering management. The investigator used Interpretive Phenomenological Analysis (IPA) to systematically collect authentic data of this social phenomenon. Twelve participants were recruited from a self-help conference and the self-help community of PWS. Semi-structured interviews were conducted 4-18 months after each participant's last conference. Interviews were transcribed and analyzed. Themes were explained in investigator narratives and illustrated through participants' quotes. Interpreted themes of the experience of having attended a self-help conference(s) for PWS included: socializing opportunities with other PWS, affiliation, redefining oneself and post-conference disclosures. A conclusion of the study was that the experience of having attended a self-help conference(s) for PWS helped to minimize negative impact that stuttering can have on daily functioning. It appears that self-help conferences were perceived as a safer or "stutter-friendly" environment and promoted social interaction, relationship building, and community building through planned and unplanned activities. Another conclusion was that the experience of having attended self-help conferences for PWS helped participants to communicate more easily. Reported increases in social activity and an "openness" about stuttering, suggest self-help conferences' utility in stuttering management. These findings are supported by other studies about successful stuttering management and self-help activities for PWS. They have helped attendees who stutter to communicate more easily and suggest a reduction in the negative impact that

CHARACTERIZATION OF FAILURES IN SCHOOL BUILDINGS EXPOSED IN AGRESSIVE ENVIRONMENT M4 OF FALCON STATE

Directory of Open Access Journals (Sweden)

María Alice Olavarrieta

2017-06-01

Full Text Available The present investigation focused on establishing a characterization of public used reinforced concrete constructions such as school units in the coastal zone of Chichiriviche and Tucacas in Venezuela’s Falcon State, exposed to highly corrosive environments and built with inadequate construction techniques. The ultimate aim was to make recommendations to regional bodies so that they could make structural interventions more precisely and assertively. The study was carried out in seven educational units, in which planimetric surveys were carried out, the collection of fault symptoms, tests in some structural members and finally a general evaluation of damages that allowed identifying their durability and particular recommendations for each school building. As a result, these units of different construction ages were in a better state of conservation, when compared directly to the sample evaluated in 2006 in private multifamily buildings, which were even younger than this sample. It was recommended for all cases that they apply a programmed and technical continuous maintenance system, which goes beyond the systems of paints whose substrate is not properly prepared, resulting in a process of superficial repair and aesthetic ineffective.

Using an engaging approach to products to help create long-term credibility

International Nuclear Information System (INIS)

McNeill, G.; Larkin, E.

1993-01-01

A long-term, thorough and engaging public information products plan is essential for supporting interaction between Nevadans and the scientists and staff of the US DOE Yucca Mountain Site Characterization Project (YMP). As members of the Institutional and External Affairs office on the YMP in Nevada, our focus is to create successful products for a Nevada audience, in accordance with DOE regulations. Our product plan is broad, but has the same theoretical foundation whether we are developing a new fact sheet of working with a scientist to help him or her communicate effectively. Our goals are to: Create products that help build long-term credibility; communicate honestly about risk; engage the public in meaningful, effective ways; be receptive to hearing Nevadans' concerns and questions; respond in ways that indicate that the public has been heard and respected; and to keep away from the open-quotes usclose quotes versus open-quotes themclose quotes orientation, distinguishing our communication approach from others. Explanations of our rationale, products plan, and goals and techniques for achieving them are stated, and related problems are described

Reducing the operational energy demand in buildings using building information modeling tools and sustainability approaches

Directory of Open Access Journals (Sweden)

Mojtaba Valinejad Shoubi

2015-03-01

Full Text Available A sustainable building is constructed of materials that could decrease environmental impacts, such as energy usage, during the lifecycle of the building. Building Information Modeling (BIM has been identified as an effective tool for building performance analysis virtually in the design stage. The main aims of this study were to assess various combinations of materials using BIM and identify alternative, sustainable solutions to reduce operational energy consumption. The amount of energy consumed by a double story bungalow house in Johor, Malaysia, and assessments of alternative material configurations to determine the best energy performance were evaluated by using Revit Architecture 2012 and Autodesk Ecotect Analysis software to show which of the materials helped in reducing the operational energy use of the building to the greatest extent throughout its annual life cycle. At the end, some alternative, sustainable designs in terms of energy savings have been suggested.

Commercial Building Energy Asset Score Program Overview and Technical Protocol (Version 1.1)

Energy Technology Data Exchange (ETDEWEB)

Wang, Na; Goel, Supriya; Makhmalbaf, Atefe

2013-08-09

The U.S. Department of Energy (DOE) is developing a voluntary national scoring system for commercial buildings to help building owners and managers assess a building’s energy-related systems independent of operations. The goal of the score is to facilitate cost-effective investment in energy efficiency improvements of commercial buildings. The system, known as the Commercial Building Energy Asset Score, will allow building owners and managers to compare their building infrastructure against peers and track building upgrades over time. The system will also help other building stakeholders (e.g., building investors, tenants, financiers, and appraisers) understand the relative efficiency of different buildings in a way that is independent from operations and occupancy. This report outlines the technical protocol used to generate the energy asset score, explains the scoring methodology, and provides additional details regarding the energy asset scoring tool. The alternative methods that were considered prior to developing the current approach are described in the Program Overview and Technical Protocol Version 1.0.

Multi-Scenario Use Case based Demonstration of Buildings Cybersecurity Framework Webtool

Energy Technology Data Exchange (ETDEWEB)

Gourisetti, Sri Nikhil G.; Mylrea, Michael E.; Gervais, Easton L.; Bhadra, Sraddhanjoli

2017-11-27

The purpose of this paper is to demonstrate the cybersecurity and software capabilities of Buildings Cybersecurity Framework (BCF) webtool. The webtool is designed based on BCF document and existing NIST standards. It’s capabilities and features are depicted through a building usecase with four different investment scenarios geared towards improving the cybersecurity posture of the building. BCF webtool also facilitates implementation of the goals outlined in Presidential Executive Order (EO) on Strengthening the Cybersecurity of Federal Networks and Critical Infrastructure (May 2017. In realization of the EO goals, BCF includes five core elements: Identify, Protect, Detect, Respond, and Recover, to help determine various policy and process level vulnerabilities and provide mitigation strategies. With the BCF webtool, an organization can perform a cybersecurity self-assessment; determine the current cybersecurity posture; define investment based goals to achieve a target state; connect the cybersecurity posture with business processes, functions, and continuity; and finally, develop plans to answer critical organizational cybersecurity questions. In this paper, the webtool and its core capabilities are depicted by performing an extensive comparative assessment over four different scenarios.

Convergence Among the Submarkets in Australian Regional Building and Construction Sector

Directory of Open Access Journals (Sweden)

Junxiao Liu

2010-12-01

Full Text Available Studies on market convergence are well considered in the literature. However, the majority of the previous research focused on housing markets and few studies have concentrated on construction markets. Owing to a simultaneously dramatic increase in the construction prices of the sub-markets in the building construction sector in Australia, this paper aims to identify the convergence among these markets, involving house construction market, other-residential building construction market, and non-residential building construction market. To achieve it the Granger causality test and generalized response function depending on the vector error correction model with the quarterly data of Australia’s eight states from 1998 to 2010 will be applied. Based upon the econometric tests, the price diffusion patterns among these construction markets have been identified. Research on the convergences of construction markets not only helps construction firms perform well in business operations and arbitrage activities, but also provides policy makers with useful information for enacting effective construction policies for national perspectives and approaches to infrastructure planning.

THE EVOLUTION OF THE DESIGN AND CONSTRUCTION OF MASONRY BUILDINGS IN THE UNITED STATES

OpenAIRE

Richard E. Klingner

2012-01-01

In this paper, the process used to develop building codes in the United States of America (USA) is summarized, with emphasis on masonry. Masonry materials used in the USA are discussed. Types of masonry construction in the USA are reviewed, addressing historical as well as modern masonry. Current non-structural and structural applications of masonry in the USA are reviewed. Historical development of masonry codes in the USA is summarized, with emphasis on the current Masonry Standards Joi...

Unintended anchors: Building rating systems and energy performance goals for U.S. buildings

International Nuclear Information System (INIS)

Klotz, Leidy; Mack, Daniel; Klapthor, Brent; Tunstall, Casey; Harrison, Jennilee

2010-01-01

In the U.S., where buildings account for 40% of energy use, commercial buildings use more energy per unit area than ever before. However, exemplary buildings demonstrate the feasibility of much better energy performance at no additional first cost. This research examines one possible explanation for this inconsistency. The aim is to investigate whether the anchoring bias, which refers to our tendency to gravitate towards a pre-defined standard regardless of its relevance, influences energy performance goals in building design. The scope examines professionals who help set energy performance goals for U.S. buildings. Prior to being asked to set an energy performance goal, these professionals were randomly directed to one of three series of questions. One series set an anchor of 90% energy reduction beyond standard practice, one set a 30% anchor, and one set no anchor. Respondents exposed to the 90% anchor, and respondents exposed to no anchor at all, set higher energy performance goals than respondents exposed to the 30% anchor. These results suggest that building rating systems that only reward incremental energy improvements may inadvertently create anchors, thereby discouraging more advanced energy performance goals and inhibiting energy performance that is technically and economically feasible.

Water sustainable management for buildings Water sustainable management for buildings

Directory of Open Access Journals (Sweden)

Juan Arturo Ocaña Ponce

2013-01-01

Full Text Available This paper presents a literature review article that deals with how to manage water in build­ings, specifically in facility projects, in ways to save water during the use, maintenance and operation of the building. This work is aimed at architects, builders and developers, and may be helpful for decision-making in the planning and management of efficient water use in buildings.Este trabajo es un artículo de revisión relacionado con el manejo y gestión del recurso agua, particularmente en proyectos de edificaciones, con el fin de propiciar ahorro de agua durante el uso, mantenimiento y operación del inmueble. Este documento está dirigido a arquitectos, constructores y desarrolladores inmobiliarios y puede ser de gran utilidad para la toma de decisiones en la fase de planeación y de gestión del uso eficiente del agua en los edificios.

Listening to Music: Helping Children Regulate Their Emotions and Improve Learning in the Classroom

Science.gov (United States)

Foran, Lucille M.

2009-01-01

Early education teachers are familiar with using music and rhythm as tools for learning language and building memory. However, the potential of music to help across all special education settings is largely unexplored. Work with music has been widely judged helpful in cases of psychological trauma, yet people do not know why it is helpful. The…

Energy Efficiency and Conservation Block Grant (EECBG) - Better Buildings Neighborhood Program at Greater Cincinnati Energy Alliance: Home Performance with Energy Star® and Better Buildings Performance

Energy Technology Data Exchange (ETDEWEB)

Holzhauser, Andy; Jones, Chris; Faust, Jeremy; Meyer, Chris; Van Divender, Lisa

2013-12-30

Center, a program that was developed and funded by the Energy Alliance and housed at Cincinnati State Technical and Community College. Nearly 100 residential and commercial contractors currently participate in the Energy Alliance’s two major programs, which have together served over 2,800 residential and 100 commercial customers. Additionally, the Energy Alliance established loan programs for homeowners, nonprofits and commercial businesses. The GC-HELP program was established to provide up to ten year low interest, unsecured loans to homeowners to cover the energy efficiency products they purchased through the Energy Alliance approved contractor base. To date the Energy Alliance has financed over $1 million in energy efficiency loans for homeowners, without any loans written off. The nonprofit business community is offered five year, fixed-interest rate loans through the Building Communities Loan Fund of $250,000. Additionally, the Energy Alliance has developed GC-PACE, a commercial financing tool that enables buildings owners to finance their energy upgrades through voluntary property assessments deploying low-interest extended-term capital from the bond market. The Energy Alliance and its partners are actively evaluating additional market-based financing solutions.

Assessment of building maintenance management practices of higher education institutions in Niger State - Nigeria

Directory of Open Access Journals (Sweden)

Ofide Blessing

2015-12-01

Full Text Available Higher education institutions face immediate pressure to preserve existing building facilities within the campuses and enhance the capacity of their higher education system to address growing demands of an increasing influx of students and academic activities. There is no doubt that dilapidated and unhealthy buildings in a decaying environment depresses the quality of life and contributes in some measure to antisocial behaviours. The buildings of higher education institutions in Nigeria only receive top management attention when there is a problem. Hence, the paper assessed the building maintenance management practices of 6 higher institutions available (2 universities, 2 polytechnics and 2 colleges of education in Niger State. This was done by interviewing the Directors of Works of the 6 institutions using a structured interview method. The study revealed that there was no maintenance manual in any of the Works Department of the higher education institution, no user satisfaction survey has ever been conducted and none of the institutions had a computerised maintenance management system (CMMS in place. In addition to these, corrective maintenance was mostly adopted and there was inadequate staffing of the field operatives. All these shortcomings might be responsible for the backlog of maintenance work experienced in the institutions studied. A proactive maintenance system should be put in place, CMMS should be adopted to enhance effective maintenance work, and top management should be enlightened on the imperative of maintenance among other issues competing for funds within the institutions and be more flexible in allocation of resources to enhance maintenance works.

Building energy, building leadership : recommendations for the adoption, development, and implementation of a commercial building energy code in Manitoba

Energy Technology Data Exchange (ETDEWEB)

Akerstream, T. [Manitoba Hydro, Winnipeg, MB (Canada); Allard, K. [City of Thompson, Thompson, MB (Canada); Anderson, N.; Beacham, D. [Manitoba Office of the Fire Commissioner, Winnipeg, MB (Canada); Andrich, R. [The Forks North Portage Partnership, MB (Canada); Auger, A. [Natural Resources Canada, Ottawa, ON (Canada). Office of Energy Efficiency; Downs, R.G. [Shindico Realty Inc., Winnipeg, MB (Canada); Eastwood, R. [Number Ten Architectural Group, Winnipeg, MB (Canada); Hewitt, C. [SMS Engineering Ltd., Winnipeg, MB (Canada); Joshi, D. [City of Winnipeg, Winnipeg, MB (Canada); Klassen, K. [Manitoba Dept. of Energy Science and Technology, Winnipeg, MB (Canada); Phillips, B. [Unies Ltd., Winnipeg, MB (Canada); Wiebe, R. [Ben Wiebe Construction Ltd., Winnipeg, MB (Canada); Woelk, D. [Bockstael Construction Ltd., Winnipeg, MB (Canada); Ziemski, S. [CREIT Management LLP, Winnipeg, MB (Canada)

2006-09-15

This report presented a strategy and a set of recommendations for the adoption, development and implementation of an energy code for new commercial construction in Manitoba. The report was compiled by an advisory committee comprised of industry representatives and government agency representatives. Recommendations were divided into 4 categories: (1) advisory committee recommendations; (2) code adoption recommendations; (3) code development recommendations; and (4) code implementation recommendations. It was suggested that Manitoba should adopt an amended version of the Model National Energy Code for Buildings (1997) as a regulation under the Buildings and Mobile Homes Act. Participation in a national initiative to update the Model National Energy Code for Buildings was also advised. It was suggested that the energy code should be considered as the first step in a longer-term process towards a sustainable commercial building code. However, the code should be adopted within the context of a complete market transformation approach. Other recommendations included: the establishment of a multi-stakeholder energy code task group; the provision of information and technical resources to help build industry capacity; the establishment of a process for energy code compliance; and an ongoing review of the energy code to assess impacts and progress. Supplemental recommendations for future discussion included the need for integrated design by building design teams in Manitoba; the development of a program to provide technical assistance to building design teams; and collaboration between post-secondary institutions to develop and deliver courses on integrated building design to students and professionals. 17 refs.

Life cycle assessment and environmental building declaration for the design building at the University of Massachusetts

Science.gov (United States)

Hongmei Gu; Richard Bergman

2018-01-01

AbstractWith the world’s increasing focus on sustainability in the construction sector through green building systems, the U.S. Department of Agriculture (USDA) has been ac-tively engaged in green building advocacy in the United States through USDA Tall Wood Building competitions and follow-up research on use of mass timber for nonresi-dential buildings. The USDA...

Software Prototype Design for Managing Housing and Communal Services in Apartment Buildings

Directory of Open Access Journals (Sweden)

Svetlana A.

2018-03-01

Full Text Available Introduction: The paper presents the disign and implementation of a computer program for the housing and utilities services. The Housing Code of the Russian Federation allows creating an apartment building council. The residents of a house choose the members this council to control providing services, manage an apartment building and represent their interests. The authors suggest using a special computer program for this purpose. Materials and Methods: The authors used the qualitative analysis of the data obtained from house bills and from the State housing and communal sector information system. The data processing and software development were performed through using the Ruby object-oriented language, the Ruby On Rails framework, the PostgreSQL database management system, the Slim templating, and Sass CSS extensions. Results: The authors developed a prototype software system to automate the activities of the apartment building council. This software helps to increase the quality of life of the apartment building residents. Discussion and Conclusions: This research provides an information framework for improving the quality of utilities services. The results of this study can be applied to the solution of many problems of housing and utilities sector.

ART drugs help reduce HIV transmission, Chinese study finds ...

International Development Research Centre (IDRC) Digital Library (Canada)

International Development Research Centre Government of Canada ... ART drugs help reduce HIV transmission, Chinese study finds ... where only one person has HIV can reduce HIV transmission rates, at least in the short term, a Chinese study has found. ... Ecohealth Field-building Leadership Initiative in Southeast Asia.

Building air quality: A guide for building owners and facility managers

International Nuclear Information System (INIS)

1991-12-01

The guide was intended to help those individuals responsible for air quality control in buildings to prevent indoor air quality problems from developing and resolving such problems quickly should they develop. Background information and guidance on dealing with indoor air quality problems were provided. Specific topics included: factors which affect indoor air quality; sources of indoor air contaminants; heating, ventilation and air conditioning (HVAC) systems; the role of building occupants; effective communication between managers and others involved; developing an indoor air quality (IAQ) profile; managing a building for good IAQ; diagnosing IAQ problems; mitigating IAQ problems, hiring professional assistance to solve an IAQ problem; common IAQ measurements; HVAC systems and IAQ; moisture with resultant mold and mildew conditions; asbestos (1332214); radon (10043922); and resources through which additional information can be obtained. Indoor air quality forms were included which can be modified to meet individual needs

Metrics for building performance assurance

Energy Technology Data Exchange (ETDEWEB)

Koles, G.; Hitchcock, R.; Sherman, M.

1996-07-01

This report documents part of the work performed in phase I of a Laboratory Directors Research and Development (LDRD) funded project entitled Building Performance Assurances (BPA). The focus of the BPA effort is to transform the way buildings are built and operated in order to improve building performance by facilitating or providing tools, infrastructure, and information. The efforts described herein focus on the development of metrics with which to evaluate building performance and for which information and optimization tools need to be developed. The classes of building performance metrics reviewed are (1) Building Services (2) First Costs, (3) Operating Costs, (4) Maintenance Costs, and (5) Energy and Environmental Factors. The first category defines the direct benefits associated with buildings; the next three are different kinds of costs associated with providing those benefits; the last category includes concerns that are broader than direct costs and benefits to the building owner and building occupants. The level of detail of the various issues reflect the current state of knowledge in those scientific areas and the ability of the to determine that state of knowledge, rather than directly reflecting the importance of these issues; it intentionally does not specifically focus on energy issues. The report describes work in progress and is intended as a resource and can be used to indicate the areas needing more investigation. Other reports on BPA activities are also available.

Mechanisms of natural ventilation in livestock buildings

DEFF Research Database (Denmark)

Rong, Li; Bjerg, Bjarne; Batzanas, Thomas

2016-01-01

Studies on the mechanisms of natural ventilation in livestock buildings are reviewed and influences on discharge and pressure coefficients are discussed. Compared to studies conducted on buildings for human occupation and industrial buildings which focus on thermal comfort, ventilation systems......, indoor air quality, building physics and energy etc., our understanding of the mechanisms involved in natural ventilation of livestock buildings are still limited to the application of the orifice equation. It has been observed that the assumptions made for application of the orifice equation...... are not valid for wind-induced cross ventilation through large openings. This review identifies that the power balance model, the concept of stream tube and the local dynamic similarity model has helped in the fundamental understanding of wind-induced natural ventilation in buildings for human occupation...

Assessing Post Conflict State Building Efforts

Science.gov (United States)

2013-03-01

Develop a global partnership for development Target: Develop further an open, rule-based, predictable, non-discriminatory trading and finance system...Beginner’s Guide to Nation-Building (Santa Monica, CA: Rand Corporation ), 2007, xvii. 15 Samuel Berger, Brent Scowcroft, and William L. Nash, “In...The Beginner’s Guide, xxi. 25 Richard A. Berk and Peter H. Rossi, Thinking About Program Evaluation 2, (Thousand Oaks, CA: Sage Publications, 1999

Current State of the Art Historic Building Information Modelling

Science.gov (United States)

Dore, C.; Murphy, M.

2017-08-01

In an extensive review of existing literature a number of observations were made in relation to the current approaches for recording and modelling existing buildings and environments: Data collection and pre-processing techniques are becoming increasingly automated to allow for near real-time data capture and fast processing of this data for later modelling applications. Current BIM software is almost completely focused on new buildings and has very limited tools and pre-defined libraries for modelling existing and historic buildings. The development of reusable parametric library objects for existing and historic buildings supports modelling with high levels of detail while decreasing the modelling time. Mapping these parametric objects to survey data, however, is still a time-consuming task that requires further research. Promising developments have been made towards automatic object recognition and feature extraction from point clouds for as-built BIM. However, results are currently limited to simple and planar features. Further work is required for automatic accurate and reliable reconstruction of complex geometries from point cloud data. Procedural modelling can provide an automated solution for generating 3D geometries but lacks the detail and accuracy required for most as-built applications in AEC and heritage fields.

Influence of staircase ventilation state on the airflow and heat transfer of the heated room on the middle floor of high rise building

International Nuclear Information System (INIS)

Shi, W.X.; Ji, J.; Sun, J.H.; Lo, S.M.; Li, L.J.; Yuan, X.Y.

2014-01-01

Highlights: • Experiments are conducted in a scaled building model. • The flow and heat transfer in the heated room are investigated. • The staircase ventilation state influence on the heated room. • The results are useful to understand the safety and energy efficiency of building. - Abstract: Safety and energy efficiency of high rise buildings have attracted public attention in recent decades. In this paper, a set of experiments was conducted in a scaled building model with 12 floors to study the influence of the staircase ventilation state on the flow and heat transfer of the heated room on the middle floor. The airflow, room temperature and fuel burning rate were investigated. It is found that when the window above the heated room is opened, the vents state below the heated room has a significant effect on the airflow and heat transfer in the heated room. When the vents below the heated room are closed, the single-directional air flows into the heated room owing to the stronger stack effect. And the flame tilt angle is larger and the upper hot smoke temperature in the heated room is low. However, when the windows above the heated room are closed, the vents state below the heated room has little influence on the airflow and heat transfer in the heated room. And, there is two-directional air flowing through the door of the heated room The burning rate of heat source is also affected by the staircase ventilation state, and the variation trend varies with the opened window position and pool size

Early human communication helps in understanding language evolution.

Science.gov (United States)

Lenti Boero, Daniela

2014-12-01

Building a theory on extant species, as Ackermann et al. do, is a useful contribution to the field of language evolution. Here, I add another living model that might be of interest: human language ontogeny in the first year of life. A better knowledge of this phase might help in understanding two more topics among the "several building blocks of a comprehensive theory of the evolution of spoken language" indicated in their conclusion by Ackermann et al., that is, the foundation of the co-evolution of linguistic motor skills with the auditory skills underlying speech perception, and the possible phylogenetic interactions of protospeech production with referential capabilities.

Buildings-to-Grid Technical Opportunities: From the Buildings Perspective

Energy Technology Data Exchange (ETDEWEB)

Kiliccote, Sila [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Piette, Mary Ann [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2014-03-28

This paper describes technologies and systems needed to transform buildings from the current state of siloed resources into transparent, reliable resources that participate in and benefit from an integrated "transactive energy" system.

Build It and They Will Come: Innovative Facilities Help Colleges Meet Academic Goals

Science.gov (United States)

Joch, Alan

2008-01-01

Lone Star College had a unique opportunity in 2000 when it began planning its new CyFair campus in suburban Houston. The school wasn't retrofitting existing buildings or contending with entrenched attitudes about what type of physical environment best supported learning. So when it designed its sprawling 550,000-square-foot campus, paid for with…

Kyiv institutional buildings sector energy efficiency program: Technical assessment

Energy Technology Data Exchange (ETDEWEB)

Secrest, T.J.; Freeman, S.L. [Pacific Northwest National Lab., Richland, WA (United States); Popelka, A. [Tysak Engineering, Acton, MA (United States); Shestopal, P.A.; Gagurin, E.V. [Agency for Rational Energy Use and Ecology, Kyiv (Ukraine)

1997-08-01

The purpose of this assessment is to characterize the economic energy efficiency potential and investment requirements for space heating and hot water provided by district heat in the stock of state and municipal institutional buildings in the city of Kyiv. The assessment involves three activities. The first is a survey of state and municipal institutions to characterize the stock of institutional buildings. The second is to develop an estimate of the cost-effective efficiency potential. The third is to estimate the investment requirements to acquire the efficiency resource. Institutional buildings are defined as nonresidential buildings owned and occupied by state and municipal organizations. General categories of institutional buildings are education, healthcare, and cultural. The characterization activity provides information about the number of buildings, building floorspace, and consumption of space heating and hot water energy provided by the district system.

Impacts of Model Building Energy Codes

Energy Technology Data Exchange (ETDEWEB)

Athalye, Rahul A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sivaraman, Deepak [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Elliott, Douglas B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Liu, Bing [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bartlett, Rosemarie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-10-31

The U.S. Department of Energy (DOE) Building Energy Codes Program (BECP) periodically evaluates national and state-level impacts associated with energy codes in residential and commercial buildings. Pacific Northwest National Laboratory (PNNL), funded by DOE, conducted an assessment of the prospective impacts of national model building energy codes from 2010 through 2040. A previous PNNL study evaluated the impact of the Building Energy Codes Program; this study looked more broadly at overall code impacts. This report describes the methodology used for the assessment and presents the impacts in terms of energy savings, consumer cost savings, and reduced CO₂ emissions at the state level and at aggregated levels. This analysis does not represent all potential savings from energy codes in the U.S. because it excludes several states which have codes which are fundamentally different from the national model energy codes or which do not have state-wide codes. Energy codes follow a three-phase cycle that starts with the development of a new model code, proceeds with the adoption of the new code by states and local jurisdictions, and finishes when buildings comply with the code. The development of new model code editions creates the potential for increased energy savings. After a new model code is adopted, potential savings are realized in the field when new buildings (or additions and alterations) are constructed to comply with the new code. Delayed adoption of a model code and incomplete compliance with the code’s requirements erode potential savings. The contributions of all three phases are crucial to the overall impact of codes, and are considered in this assessment.

Digital Game Building: Learning in a Participatory Culture

Science.gov (United States)

Li, Qing

2010-01-01

Background: The emergence of a participatory culture, brought about mainly by the use of Web2.0 technology, is challenging us to reconsider aspects of teaching and learning. Adapting the learning-as-digital-game-building approach, this paper explores how new educational practices can help students build skills for the 21st century. Purpose: This…

Best Practices Guide for High-Performance Indian Office Buildings

Energy Technology Data Exchange (ETDEWEB)

Singh, Reshma [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sartor, Dale [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ghatikar, Girish [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2013-04-01

This document provides best practice guidance and energy- efficiency recommendations for the design, construction, and operation of high-­performance office buildings in India. Through a discussion of learnings from exemplary projects and inputs from experts, it provides recommendations that can potentially help achieve (1) enhanced working environments, (2) economic construction/faster payback, (3) reduced operating costs, and (4) reduced greenhouse gas (GHG) emissions. It also provides ambitious (but achievable) energy performance benchmarks, both as adopted targets during building modeling (design phase) and during measurement and verification (operations phase). These benchmarks have been derived from a set of representative best-in-class office buildings in India. The best practices strategies presented in this guide would ideally help in delivering high-­performance in terms of a triad—of energy efficiency, cost efficiency, and occupant comfort and well-­being. These best practices strategies and metrics should be normalized—that is, corrected to account for building characteristics, diversity of operations, weather, and materials and construction methods.

Nearly Zero Energy Standard for Non-Residential Buildings with high Energy Demands—An Empirical Case Study Using the State-Related Properties of BAVARIA

Directory of Open Access Journals (Sweden)

Michael Keltsch

2017-03-01

Full Text Available The Energy Performance of Buildings Directive (EPBD 2010 calls for the Nearly Zero Energy Building (nZEB Standard for new buildings from 2021 onwards: Buildings using “almost no energy” are powered by renewable sources or by the energy produced by the building itself. For residential buildings, this ambitious new standard has already been reached. But for other building types, this goal is still far away. The potential of these buildings to meet a nZEB Standard was investigated by analyzing ten case studies, representing non-residential buildings with different uses. The analysis shows that the primary characteristics common to critical building types are a dense building context with a very high degree of technical installation (such as hospital, research, and laboratory buildings. The large primary energy demand of these types of buildings cannot be compensated by building- and property-related energy generation, including off-site renewables. If the future nZEB Standard were to be defined with lower requirements because of this, the state-related properties of Bavaria suggest that the real potential energy savings available in at least 85% of all new buildings would be insufficiently exploited. Therefore, it would be more useful to individualize the legal energy verification process for new buildings, to distinguish critical building types such as laboratories and hospitals from the other building types.

Energy consumption in commercial buildings: A comparison with BEPS budgets

Science.gov (United States)

1980-09-01

Metered energy consumption data were collected on existing commercial buildings to help establish the proposed building energy performance standards (BEPS). The search has identified 84 buildings whose metered energy consumption is equal to or less than that proposed for their BEPS budgets and another 7 buildings whose metered consumption is less than 20 percent above their BEPS budgets. The methodology used to identify the buildings and to collect their metered energy consumption data are described. The data are analyzed and summarized and conclusions are drawn.

ImBuild: Impact of building energy efficiency programs

Energy Technology Data Exchange (ETDEWEB)

Scott, M.J.; Hostick, D.J.; Belzer, D.B.

1998-04-01

As part of measuring the impact of government programs on improving the energy efficiency of the Nation`s building stock, the Department of Energy Office of Building Technology, State and Community Programs (BTS) is interested in assessing the economic impacts of its portfolio of programs, specifically the potential impact on national employment and income. The special-purpose version of the IMPLAN model used in this study is called ImBuild. In comparison with simple economic multiplier approaches, such as Department of Commerce RIMS 2 system, ImBuild allows for more complete and automated analysis of the economic impacts of energy efficiency investments in buildings. ImBuild is also easier to use than existing macroeconomic simulation models. The authors conducted an analysis of three sample BTS energy programs: the residential generator-absorber heat exchange gas heat pump (GAX heat pump), the low power sulfur lamp (LPSL) in residential and commercial applications, and the Building America program. The GAX heat pump would address the market for the high-efficiency residential combined heating and cooling systems. The LPSL would replace some highly efficient fluorescent commercial lighting. Building America seeks to improve the energy efficiency of new factory-built, modular, manufactured, and small-volume, site-built homes through use of systems engineering concepts and early incorporation of new products and processes, and by increasing the demand for more energy-efficient homes. The authors analyze a scenario for market penetration of each of these technologies devised for BTS programs reported in the BTS GPRA Metrics Estimates, FY99 Budget Request, December 19, 1997. 46 figs., 4 tabs.

Summary of Green Building Programs

Energy Technology Data Exchange (ETDEWEB)

2002-08-01

In early 2002, the National Association of Home Builders completed a census of residential green building programs across the United States to assess differences and similarities among programs. This report catalogs different ways that builders participate in residential green building programs.

Building a leadership brand.

Science.gov (United States)

Ulrich, Dave; Smallwood, Norm

2007-01-01

How do some firms produce a pipeline of consistently excellent managers? Instead of concentrating merely on strengthening the skills of individuals, these companies focus on building a broad organizational leadership capability. It's what Ulrich and Smallwood--cofounders of the RBL Group, a leadership development consultancy--call a leadership brand. Organizations with leadership brands take an "outside-in" approach to executive development. They begin with a clear statement of what they want to be known for by customers and then link it with a required set of management skills. The Lexus division of Toyota, for instance, translates its tagline--"The pursuit of perfection"--into an expectation that its leaders excel at managing quality processes. The slogan of Bon Secours Health System is "Good help to those in need." It demands that its managers balance business skills with compassion and caring. The outside-in approach helps firms build a reputation for high-quality leaders whom customers trust to deliver on the company's promises. In examining 150 companies with strong leadership capabilities, the authors found that the organizations follow five strategies. First, make sure managers master the basics of leadership--for example, setting strategy and grooming talent. Second, ensure that leaders internalize customers' high expectations. Third, incorporate customer feedback into evaluations of executives. Fourth, invest in programs that help managers hone the right skills, by tapping customers to participate in such programs. Finally, track the success of efforts to build leadership bench strength over the long-term. The result is outstanding management that persists even when individual executives leave. In fact, companies with the strongest leadership brands often become "leader feeders"--firms that regularly graduate leaders who go on to head other companies.

Green Buildings and Health.

Science.gov (United States)

Allen, Joseph G; MacNaughton, Piers; Laurent, Jose Guillermo Cedeno; Flanigan, Skye S; Eitland, Erika Sita; Spengler, John D

2015-09-01

Green building design is becoming broadly adopted, with one green building standard reporting over 3.5 billion square feet certified to date. By definition, green buildings focus on minimizing impacts to the environment through reductions in energy usage, water usage, and minimizing environmental disturbances from the building site. Also by definition, but perhaps less widely recognized, green buildings aim to improve human health through design of healthy indoor environments. The benefits related to reduced energy and water consumption are well-documented, but the potential human health benefits of green buildings are only recently being investigated. The objective of our review was to examine the state of evidence on green building design as it specifically relates to indoor environmental quality and human health. Overall, the initial scientific evidence indicates better indoor environmental quality in green buildings versus non-green buildings, with direct benefits to human health for occupants of those buildings. A limitation of much of the research to date is the reliance on indirect, lagging and subjective measures of health. To address this, we propose a framework for identifying direct, objective and leading "Health Performance Indicators" for use in future studies of buildings and health.

Managing the indoor environment and energy efficiency in historical buildings

Energy Technology Data Exchange (ETDEWEB)

Huovila, P., Email: pekka.huovila@vtt.fi

2012-06-15

In Italy there are a lot of historical buildings that are relevant in cultural, architectural and artistic terms. Such heritage needs a constant process of renovation to keep the buildings secure, safe and efficient and to make them suitabled for host offices, museums, events and art exhibitions. Unfortunately, most of these renovation activities consider only either the security issues or outward appearance or the indoor conditions or the installations; all actions are independently designed and implemented, and an integrated approach is missing. Italian public bodies strongly need support and guidelines to write optimal tenders for building refurbishments. In this paper, we present a methodology for assessing the state of building and defining tender requirements. The methodology is based on the definition of performance indicators, related to security against human threats, thermal and hygrometric quality, living indoor conditions, air quality, lighting conditions, resilience and management of emergencies in case of natural disasters, accessibility, etc. A very important aspect that the methodology considers is compliance with regulations. Also some economical aspects will be considered. The methodology is implemented in a decision- support software tool that presents the different indicators in relation to each other, evaluating performance indices. These indices could be used to simulate different solutions and help choose the best one. Particular attention is paid to how the results are shown to end users. (orig.)

The State Strategies for Building the Knowledge Economy: the Transformation Vector and Group Features

Directory of Open Access Journals (Sweden)

Khanin Igor G.

2017-12-01

Full Text Available The aim of the article is to analyze the state strategies for building the knowledge economy, determine the directions of transformation and group features of the developed countries and the most economically powerful developing countries. Attention is drawn to the modern world context of historical circumstances affecting the state strategies for the transition to the knowledge economy, the changes in patterns of economic growth and the new stage of globalization associated with the development and dissemination of knowledge. In this regard, there singled out a number of global megatrends covering scientific and technical activities, international trade in high-technology goods and knowledge-intensive services, international migration of labor, etc. There also noted the change in the paradigm of rivalry and the “architecture” of the global economic leadership. The indicators of scientific and technical activities in several countries are analyzed, which proves the preservation of asymmetry. The results of the analysis of the strategies for building the knowledge economy in a number of developed countries (the US, EU countries, Germany, France, Denmark, Finland, Sweden, Japan, South Korea, Singapore, Israel and developing countries (China, India, Malaysia, Brazil, South Africa, Mexico are presented. Their participation in the world scientific progress and innovation process is characterized, as well as the main directions of transformations in terms of the transition to the knowledge economy (new industrialization, development of science and education, improvement of innovation systems, development of international scientific and technical cooperation, etc.. One of the factors of structural changes at all levels is macro innovations. Within the framework of the proposed concept, three types of such innovations are distinguished: scientific and paradigm, structural, and transformational. Their relationship with the foreign economic strategy

EXERT Yourself and Help in the Search for an Alzheimer's Cure

Science.gov (United States)

... Yourself and Help in the Search for an Alzheimer’s Cure Can exercise slow or prevent cognitive decline in older people who are at increased risk for Alzheimer’s disease? The EXERT Study: Building Memories Through Exercise ...

Towards more financing options for energy efficient buildings and houses

International Nuclear Information System (INIS)

Vethman, P.; Menkveld, M.

2012-02-01

This article offers an impression of the problems related to the limited financial options for energy efficient buildings and dwellings and possible solutions. It is based on a recent ECN study (RE-BIZZ) and several interviews about this topic with financers. There is a need for a more business appreciation of market parties such as financers for energy efficiency in buildings to increase financing options. The market needs the help of the government, which can help to remove barriers and hence make financing more appealing. [nl

Surfing for suicide methods and help: content analysis of websites retrieved with search engines in Austria and the United States.

Science.gov (United States)

Till, Benedikt; Niederkrotenthaler, Thomas

2014-08-01

The Internet provides a variety of resources for individuals searching for suicide-related information. Structured content-analytic approaches to assess intercultural differences in web contents retrieved with method-related and help-related searches are scarce. We used the 2 most popular search engines (Google and Yahoo/Bing) to retrieve US-American and Austrian search results for the term suicide, method-related search terms (e.g., suicide methods, how to kill yourself, painless suicide, how to hang yourself), and help-related terms (e.g., suicidal thoughts, suicide help) on February 11, 2013. In total, 396 websites retrieved with US search engines and 335 websites from Austrian searches were analyzed with content analysis on the basis of current media guidelines for suicide reporting. We assessed the quality of websites and compared findings across search terms and between the United States and Austria. In both countries, protective outweighed harmful website characteristics by approximately 2:1. Websites retrieved with method-related search terms (e.g., how to hang yourself) contained more harmful (United States: P search engines generally had more protective characteristics (P search engines. Resources with harmful characteristics were better ranked than those with protective characteristics (United States: P < .01, Austria: P < .05). The quality of suicide-related websites obtained depends on the search terms used. Preventive efforts to improve the ranking of preventive web content, particularly regarding method-related search terms, seem necessary. © Copyright 2014 Physicians Postgraduate Press, Inc.

Model and tool requirements for co-simulation of building performance

NARCIS (Netherlands)

Trcka, M.; Hensen, J.L.M.

2006-01-01

The use of building performance simulation (BPS) can substantially help in improving building design towards higher occupant comfort and lower fuel consumption, while reducing emission of greenhouse gasses. Unfortunately, current BPS tools do not allow inter-tool communication and thus limit a

Technology for Building Systems Integration and Optimization – Landscape Report

Energy Technology Data Exchange (ETDEWEB)

William Goetzler, Matt Guernsey, Youssef Bargach

2018-01-31

BTO's Commercial Building Integration (CBI) program helps advance a range of innovative building integration and optimization technologies and solutions, paving the way for high-performing buildings that could use 50-70% less energy than typical buildings. CBI’s work focuses on early stage technology innovation, with an emphasis on how components and systems work together and how whole buildings are integrated and optimized. This landscape study outlines the current body of knowledge, capabilities, and the broader array of solutions supporting integration and optimization in commercial buildings. CBI seeks to support solutions for both existing buildings and new construction, which often present very different challenges.

Building-owners energy-education program. Final report

Energy Technology Data Exchange (ETDEWEB)

1981-12-01

The objectives of the program are to develop and test market a cogent education program aimed specifically at building owners to help them be more decisive and knowledgeable, and to motivate them to direct their managers and professionals to implement a rational plan for achieving energy conservation in their commercial office buildings and to establish a plan, sponsored by the Building Owners and Managers Association International (BOMA) to implement this educational program on a nation-wide basis. San Francisco, Chicago, and Atlanta were chosen for test marketing a model program. The procedure used in making the energy survey is described. Energy survey results of participating buildings in San Francisco, Chicago, and Atlanta are summarized. (MCW)

A Conversation on Zero Net Energy Buildings

Energy Technology Data Exchange (ETDEWEB)

Torcellini, Paul A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Eley, Charles [Consultant; Gupta, Smita [Itron; McHugh, Jon [McHugh Energy Consultants; Lui, Bing [Pacific Northwest National Laboratory; Higgins, Cathy [New Buildings Institute; Iplikci, Jessica [Energy Trust of Oregon; Rosenberg, Michael [Pacific Northwest National Laboratory

2017-06-01

Recently, zero net energy (ZNE) buildings have moved from state-of-the-art small project demonstrations to a more widely adopted approach across the country among various building types and sizes. States such as California set policy goals of all new residential construction to be NZE by 2020 and all commercial buildings to be NZE by 2030. However, the market for designing, constructing, and operating ZNE buildings is still relatively small. We bring together distinguished experts to share their thoughts on making ZNE buildings more widespread and mainstream from a broad perspective, including governments, utilities, energy-efficiency research institutes, and building owners. This conversation also presents the benefits of ZNE and ways to achieve that goal in the design and operation of buildings. The following is a roundtable conducted by ASHRAE Journal and Bing Liu with Charles Eley, Smita Gupta, Cathy Higgins, Jessica Iplikci, Jon McHugh, Michael Rosenberg, and Paul Torcellini.

Case-study of thermo active building systems in Japanese climate

DEFF Research Database (Denmark)

Li, Rongling; Yoshidomi, Togo; Ooka, Ryozo

2015-01-01

Thermo active building systems (TABS) have been applied in office buildings as a promising energy efficient solution in many European countries. The utilization of building thermal mass helps to provide high quality thermal environments with less energy consumption. However, the concept of TABS...... is entirely new in Japan. This paper introduces and evaluates TABS under Tokyo weather conditions to clarify the potential of use TABS in Japan. Cooling capacity of thermo active building systems used in an office building was evaluated by means of dynamic simulations. Two central rooms of the office were...

Better Building Alliance, Plug and Process Loads in Commercial Buildings: Capacity and Power Requirement Analysis (Brochure)

Energy Technology Data Exchange (ETDEWEB)

2014-09-01

This brochure addresses gaps in actionable knowledge that can help reduce the plug load capacities designed into buildings. Prospective building occupants and real estate brokers lack accurate references for plug and process load (PPL) capacity requirements, so they often request 5-10 W/ft2 in their lease agreements. This brochure should be used to make these decisions so systems can operate more energy efficiently; upfront capital costs will also decrease. This information can also be used to drive changes in negotiations about PPL energy demands. It should enable brokers and tenants to agree about lower PPL capacities. Owner-occupied buildings will also benefit. Overestimating PPL capacity leads designers to oversize electrical infrastructure and cooling systems.

Helping Young Children in Frightening Times.

Science.gov (United States)

Young Children, 2001

2001-01-01

Presents ways parents and other adults can help young children deal with tragedy and violence in the wake of terrorist attacks on the United States. Suggests giving reassurance and physical comfort, providing structure and stability, expecting a range of reactions, helping children to talk if they are ready, turning off the television, and…

Methodology to Assess No Touch Audit Software Using Simulated Building Utility Data

Energy Technology Data Exchange (ETDEWEB)

Cheung, Howard [Purdue Univ., West Lafayette, IN (United States); Braun, James E. [Purdue Univ., West Lafayette, IN (United States); Langner, M. Rois [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-10-01

This report describes a methodology developed for assessing the performance of no touch building audit tools and presents results for an available tool. Building audits are conducted in many commercial buildings to reduce building energy costs and improve building operation. Because the audits typically require significant input obtained by building engineers, they are usually only affordable for larger commercial building owners. In an effort to help small building and business owners gain the benefits of an audit at a lower cost, no touch building audit tools have been developed to remotely analyze a building's energy consumption.

Radon in large buildings

International Nuclear Information System (INIS)

Wilson, D.L.; Dudney, C.S.; Gammage, R.B.

1993-01-01

Over the past several years, considerable research has been devoted by the U.S. Environmental Protection Agency (USEPA) and others to develop radon sampling protocols for single family residences and schools. However, very little research has been performed on measuring radon in the work place. To evaluate possible sampling protocols, 833 buildings throughout the United States were selected for extensive radon testing. The buildings tested (warehouses, production plants and office buildings) were representative of commercial buildings across the country both in design, size and use. Based on the results, preliminary radon sampling protocols for the work place have been developed. (orig.). (5 refs., 3 figs.)

Code Help: Can This Unique State Regulatory Intervention Improve Emergency Department Crowding?

Science.gov (United States)

Michael, Sean S; Broach, John P; Kotkowski, Kevin A; Brush, D Eric; Volturo, Gregory A; Reznek, Martin A

2018-05-01

Emergency department (ED) crowding adversely affects multiple facets of high-quality care. The Commonwealth of Massachusetts mandates specific, hospital action plans to reduce ED boarding via a mechanism termed "Code Help." Because implementation appears inconsistent even when hospital conditions should have triggered its activation, we hypothesized that compliance with the Code Help policy would be associated with reduction in ED boarding time and total ED length of stay (LOS) for admitted patients, compared to patients seen when the Code Help policy was not followed. This was a retrospective analysis of data collected from electronic, patient-care, timestamp events and from a prospective Code Help registry for consecutive adult patients admitted from the ED at a single academic center during a 15-month period. For each patient, we determined whether the concurrent hospital status complied with the Code Help policy or violated it at the time of admission decision. We then compared ED boarding time and overall ED LOS for patients cared for during periods of Code Help policy compliance and during periods of Code Help policy violation, both with reference to patients cared for during normal operations. Of 89,587 adult patients who presented to the ED during the study period, 24,017 (26.8%) were admitted to an acute care or critical care bed. Boarding time ranged from zero to 67 hours 30 minutes (median 4 hours 31 minutes). Total ED LOS for admitted patients ranged from 11 minutes to 85 hours 25 minutes (median nine hours). Patients admitted during periods of Code Help policy violation experienced significantly longer boarding times (median 20 minutes longer) and total ED LOS (median 46 minutes longer), compared to patients admitted under normal operations. However, patients admitted during Code Help policy compliance did not experience a significant increase in either metric, compared to normal operations. In this single-center experience, implementation of the

Building energy efficiency in rural China

International Nuclear Information System (INIS)

Evans, Meredydd; Yu, Sha; Song, Bo; Deng, Qinqin; Liu, Jing; Delgado, Alison

2014-01-01

Rural buildings in China now account for more than half of China's total building energy use. Forty percent of the floorspace in China is in rural villages and towns. Most of these buildings are very energy inefficient, and may struggle to provide for basic needs. They are cold in the winter, and often experience indoor air pollution from fuel use. The Chinese government plans to adopt a voluntary building energy code, or design standard, for rural homes. The goal is to build on China's success with codes in urban areas to improve efficiency and comfort in rural homes. The Chinese government recognizes rural buildings represent a major opportunity for improving national building energy efficiency. The challenges of rural China are also greater than those of urban areas in many ways because of the limited local capacity and low income levels. The Chinese government wants to expand on new programs to subsidize energy efficiency improvements in rural homes to build capacity for larger-scale improvement. This article summarizes the trends and status of rural building energy use in China. It then provides an overview of the new rural building design standard, and describes options and issues to move forward with implementation. - Highlights: • Building energy use is larger in rural China than in cities. • Rural buildings are very energy intensive, and energy use is growing with incomes. • A new design standard aims to help rural communities build more efficiently. • Important challenges remain with implementation

Workplace Financial Wellness Programs Help Employees Manage Health Care Changes.

Science.gov (United States)

Meyer, Cynthia; Smith, Michael C

Employers and employees are navigating major changes in health insurance benefits, including the move to high-deductible health plans in conjunction with health savings accounts (HSAs). The HSA offers unique benefits that could prove instrumental in helping workers both navigate current health care expenses and build a nest egg for much larger health care costs in retirement. Yet employees often don't understand the HSA and how to best use it. How can employers help employees make wise benefits choices that work for their personal financial circumstances?

Assessing Potential Energy Cost Savings from Increased Energy Code Compliance in Commercial Buildings

Energy Technology Data Exchange (ETDEWEB)

Rosenberg, Michael I.; Hart, Philip R.; Athalye, Rahul A.; Zhang, Jian; Wang, Weimin

2016-02-15

The US Department of Energy’s most recent commercial energy code compliance evaluation efforts focused on determining a percent compliance rating for states to help them meet requirements under the American Recovery and Reinvestment Act (ARRA) of 2009. That approach included a checklist of code requirements, each of which was graded pass or fail. Percent compliance for any given building was simply the percent of individual requirements that passed. With its binary approach to compliance determination, the previous methodology failed to answer some important questions. In particular, how much energy cost could be saved by better compliance with the commercial energy code and what are the relative priorities of code requirements from an energy cost savings perspective? This paper explores an analytical approach and pilot study using a single building type and climate zone to answer those questions.

CERN's newest building

CERN Multimedia

Anaïs Vernède

2011-01-01

With a growing number of users looking for offices, the shortage of space has become acute, particularly for physicists. Building 42, inaugurated on Friday 11 February, offers almost 300 new work-spaces and a particularly pleasant working environment.   Mauro Dell’Ambrogio, the Swiss State Secretary for Education and Research (left), Rolf Heuer , CERN Director-General (centre), and Mark Muller, President of the Government of the Republic and Canton of Geneva and Head of the Department of Construction and Information Technology (right) at the opening of Building 42 on 11 February, 2011.   Construction work for the new Building 42 began in January 2009, thanks to support from the Swiss foundation FIPOI (Fondation des immeubles pour les organisations internationales). After two years of work, the building, an extension of Building 40, is ready to accommodate physicists from around the world who have come to work on the LHC. "We had more than 25 external contractors working...

Building Energy Monitoring and Analysis

Energy Technology Data Exchange (ETDEWEB)

Hong, Tianzhen; Feng, Wei; Lu, Alison; Xia, Jianjun; Yang, Le; Shen, Qi; Im, Piljae; Bhandari, Mahabir

2013-06-01

U.S. and China are the world’s top two economics. Together they consumed one-third of the world’s primary energy. It is an unprecedented opportunity and challenge for governments, researchers and industries in both countries to join together to address energy issues and global climate change. Such joint collaboration has huge potential in creating new jobs in energy technologies and services. Buildings in the US and China consumed about 40% and 25% of the primary energy in both countries in 2010 respectively. Worldwide, the building sector is the largest contributor to the greenhouse gas emission. Better understanding and improving the energy performance of buildings is a critical step towards sustainable development and mitigation of global climate change. This project aimed to develop a standard methodology for building energy data definition, collection, presentation, and analysis; apply the developed methods to a standardized energy monitoring platform, including hardware and software, to collect and analyze building energy use data; and compile offline statistical data and online real-time data in both countries for fully understanding the current status of building energy use. This helps decode the driving forces behind the discrepancy of building energy use between the two countries; identify gaps and deficiencies of current building energy monitoring, data collection, and analysis; and create knowledge and tools to collect and analyze good building energy data to provide valuable and actionable information for key stakeholders.

Potential Retrofit of Existing Sultan Ismail Parliament Building, Johor to Green Building

Directory of Open Access Journals (Sweden)

Yasin Mohd Norazam

2017-01-01

Full Text Available The concept of retrofitting an existing building towards green building was introduced to move towards greener development. This paper investigates the benefits of retrofitting an existing building to green building. The potential retrofit of the existing Sultan Ismail Parliament building was also determined and later the elements of the building to be retrofitted were proposed. The Sultan Ismail Parliament building is one of the newest development that serves as the Johor state administrative center under Iskandar Malaysia. Therefore, this paper focuses on whether the existing building has fulfilled all of the green building elements. A set of questionnaire was distributed to the targeted respondents who were the engineers, architects, technicians, staffs and those who were involved in the development of the Sultan Ismail Parliament building. A total of 60 respondents was involved. Based on the analyzed data, it shows that the existing building has fulfilled only one of the green building elements which is the Indoor Environmental Quality. The items that scored 3.5 and above mean index under this element include the daylight glare is not bothering, the ventilation in the building is adequate, inspections are done regularly, smoking regulation is implemented and the number of openings of windows and doors is sufficient. While it shows that other elements were only partially fulfilled. The criteria that achieved below 3.5 mean index values is considered to be the potential elements that could be used for future retrofitting initiative.

Building in a Market Economy

DEFF Research Database (Denmark)

Bonke, Sten; Levring, Peter

This book offers a "state of the art" introduction to the "Danish way" of building. It presents a source of information and inspiration to the complex transitional process of rearranging the construction sectors in Central and Eastern European countries. The text gives a historical presentation o...... and functions of the main actors in the building process. During these passages and in a final section important future developments are highlighted, and characteristic research and development projects are presented....... of the development in the built environment since the second world war. Subsequently the different current regulative systems on state and on building industry level are revised. The more practical managerial methods are then elaborated and associated with the common organisational frameworks, indicating the roles...

Drupal The Guide to Planning and Building Websites

CERN Document Server

McCourt, Cynthia

2011-01-01

A complete lifecycle guide to planning and building a site with Drupal Drupal allows you to quickly and easily build a wide variety of web sites, from very simple blog sites to extremely complex sites that integrate with other systems. In order to maximize what Drupal can do for you, you need to plan. Whether you are building with Drupal 6 or 7, this book details the steps necessary to plan your site so you can make informed decisions before you start to build.Explains how to define the scope of your projectShows you how to create a design plan taking into consideration how Drupal worksHelps y

IAEA Assistance in Helping Member States Develop Effectively Independent and Robust Regulators for Nuclear Installation Safety

Energy Technology Data Exchange (ETDEWEB)

Nicic, A., E-mail: A.Nicic@iaea.org [International Atomic Energy Agency (IAEA), Department of Nuclear Safety and Security, Wagramer Strasse 5, P.O. Box 100, 1400 Vienna (Austria)

2014-10-15

Full text: The International Conference on Topical Issues in Nuclear Installation Safety will be focused on the exchange of information on the latest thinking and advances in the implementation of the concept of Defence-in-Depth (DID) in nuclear installations, and the associated challenges. The focus will be on operating nuclear installations, including nuclear power plants, research reactors and fuel cycle facilities, and on how lessons learned from operating experience and recent events (e.g. the Fukushima Daiichi accident) are used to enhance safety. The implementation of DID covers a number of elements that are directly related to the different states and phases of a nuclear facility. This presentation will discuss the importance of the regulatory body in its oversight role as a cross-cutting element of DID in helping to assure the safety of nuclear installations. Taking note of the numerous challenges in developing an effectively independent and robust regulatory body, the presentation will describe how the IAEA assists Member States in their development of the appropriate regulatory infrastructure and necessary capacity to carry out their regulatory responsibilities – consistent with the IAEA Safety Standards. The presentation will describe the importance of the self-assessment process which serves as a starting point for helping Member States gain an understanding of what support they need and when the support should be provided as they develop into a competent regulatory authority. The presentation will discuss recent improvements in the self-assessment process and related IAEA services in this regard. Once regulatory bodies are established, it is essential that they seek continuous improvement. In this regard, the presentation will describe the IAEA’s assistance provided through the Integrated Regulatory Review Service (IRRS) and recent activities to improve the IRRS, consistent with the IAEA’s Action Plan on Nuclear Safety. (author)

Analysis of the Russian Market for Building Energy Efficiency

Energy Technology Data Exchange (ETDEWEB)

Lychuk, Taras; Evans, Meredydd; Halverson, Mark A.; Roshchanka, Volha

2012-12-01

This report provides analysis of the Russian energy efficiency market for the building sector from the perspective of U.S. businesses interested in exporting relevant technologies, products and experience to Russia. We aim to help U.S. energy efficiency and environmental technologies businesses to better understand the Russian building market to plan their market strategy.

Recommendations for enforcing and administering lighting-efficiency standards in existing public buildings in New York State. Final report

Energy Technology Data Exchange (ETDEWEB)

None

1977-09-30

To determine the most efficient, cost-effective means of enforcing lighting standards in existing public buildings, various enforcement procedures were investigated. A summary of conclusions and recommendations are presented. In Chapter 1, the adoption of a modified version of the sections of the proposed ASHRAE 100 standards that relate to lighting is recommended. The basic features of the proposed ASHRAE 100 standards are described and compared with those of other types of standards, and the modifications recommended to facilitate implementation are then presented. In Chapter 2, the structure is outlined and the details are provided of the enforcement strategy devised based on self-certification and penalties for noncompliance. Chapter 3 is intended to guide the state in implementing that strategy; it is suggested that the State Energy Office begin to conduct inspections of buildings selected first randomly and then according to a specific discriminant-analysis scheme. The timetable that should be followed and the management responsibilities that should be assigned if the state is to meet its 1980 goals related to saving energy through the implementation of lighting-efficiency standards are delineated in Chapter 4. The appendixes provide additional information and data supporting the specific conclusions and recommendations presented throughout the text. (MCW)

Economic disparities between EU states and regions

Directory of Open Access Journals (Sweden)

Ion CIUREA

2010-05-01

Full Text Available EU has 27 Member States representing a community and a market of 493million citizens, which creates further economic and social disparities between thestates and their 271 regions. In a region in four, the GDP (gross domestic product percapita is 75% below the average for the EU-27. Based on the concepts of solidarity andcohesion, regional policy of the European Union favors reducing structural disparitiesbetween EU regions, the balanced development of the community and promoting aneffective equality of opportunity between people. Over the past 50 years, Europeancooperation has helped build highways, sewage plants, bridges, laboratories forbiotechnology. She helped to revive urban areas and neglected activities, throughcountless projects in the poorest regions of the Union.. Two key values: solidarity andcohesion, underlying these projects and the regional policy of the European Union. Theeconomic, social and territorial cohesion will always be at the heart of Europe Strategy2020, a key mechanism for achieving the priorities for a smart growth, sustainable andinclusive in the Member States and regions.

The Mind-Body Building Equation.

Science.gov (United States)

Dryfoos, Joy

2000-01-01

Full-service community schools combine three concepts--mind, body, and building--into an integrated approach placing quality education and comprehensive support services at one site. The DeWitt Wallace-Reader's Digest Fund is helping schools and communities replicate 4 such programs at 60 sites in 20 U.S. cities. (MLH)

Policy Pathways: Energy Performance Certification of Buildings

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-07-01

Improving energy efficiency is one of the most effective measures to address energy security, climate change and economic objectives. The Policy Pathways series can help countries capture this potential by assisting with the implementation of the 25 energy efficiency policy recommendations that were published by the International Energy Agency (IEA) in 2008. This policy pathway on energy performance certification of buildings is the second in the series. It aims to provide a 'how-to' guide to policy makers and relevant stakeholders on the essential elements in implementing energy performance certification of buildings programmes. Energy performance certification of buildings is a way to rate the energy efficiency of individual buildings -- whether they be residential, commercial or public. It is a key policy instrument that can assist governments in reducing energy consumption in buildings. This policy pathway showcases experiences from countries around the world to show examples of good practice and delivers a pathway of ten critical steps to implement energy performance certification of buildings programmes.

Commercial Building Energy Asset Score System: Program Overview and Technical Protocol (Version 1.0)

Energy Technology Data Exchange (ETDEWEB)

Wang, Na; Gorrissen, Willy J.

2013-01-11

The U.S. Department of Energy (DOE) is developing a national voluntary energy asset score system that includes an energy asset score tool to help building owners evaluate their buildings with respect to the score system. The goal of the energy asset score system is to facilitate cost-effective investment in energy efficiency improvements of commercial buildings. The system will allow building owners and managers to compare their building infrastructure against peers and track building upgrade progress over time. The system can also help other building stakeholders (e.g., building operators, tenants, financiers, and appraisers) understand the relative efficiency of different buildings in a way that is independent from their operations and occupancy. This report outlines the technical protocol used to generate the energy asset score, explains the scoring methodology, and provides additional details regarding the energy asset score tool. This report also describes alternative methods that were considered prior to developing the current approach. Finally, this report describes a few features of the program where alternative approaches are still under evaluation.

Better Buildings Neighborhood Program Progress Stories

Energy Technology Data Exchange (ETDEWEB)

None

2012-04-19

n neighborhoods across the country, stories are emerging constantly of individuals, businesses, and organizations that are benefiting from energy efficiency. Included are the stories of real people making their homes, businesses, and communities better with the help of the Better Buildings Neighborhood Program.

BUILDING AN EU MEMBER STATE THROUGH DEMOCRACY PROMOTION: THE CASE OF CROATIA'S PUBLIC ADMINISTRATION REFORM

Directory of Open Access Journals (Sweden)

Sonja Grimm

2013-01-01

Full Text Available This contribution studies the process of building an EU member state through democracy promotion in the case of Croatia with a special focus on two reform initiatives in the field of Public Administration Reform (PAR. Croatia’s experience is representative of intense efforts of the international community to overcome the consequences of violent state dissolution and civil war. The EU in particular has assisted post-conflict democratization with diplomatic initiatives, the provision of aid, and political conditionality. The Croatian political elite showed great willingness to implement democratic reforms, while at the same time remaining critical of what they viewed as ‘too much’ external interference in domestic state affairs. Based on 30 interviews with Croatian officials, Croatian civil society actors, members of the EU delegation and other representatives of the International donor community, we empirically assess progress and setbacks in Croatia’s public administration reform and explain why some reform initiatives have been successfully implemented while others are still pending.

Help Is Here! Building PLNs across Local, State, and National Professional Organizations

Science.gov (United States)

Yates, Steven D.

2012-01-01

In this article, the author shares a story that one would tell his/her colleagues at a district professional-development meeting in his/her efforts to inspire them to move from good to great. He considers the careers of three school librarians in one school district--Amy, Brady, and Cindy--who ended up becoming strong, resourceful leaders for…

Wood as a sustainable building material

Science.gov (United States)

Robert H. Falk

2009-01-01

Few building materials possess the environmental benefits of wood. It is not only the most widely used building material in the United States but also one with characteristics that make it suitable for a wide range of applications. Efficient, durable, and useful wood products produced from trees range from a minimally processed log at a log-home building site to a...

Evaluating the use of programming games for building early analytical thinking skills

Directory of Open Access Journals (Sweden)

H. Tsalapatas

2015-11-01

Full Text Available Analytical thinking is a transversal skill that helps learners excel academically independently of theme area. It is on high demand in the world of work especially in innovation related sectors. It involves finding a viable solution to a problem by identifying goals, parameters, and resources available for deployment. These are strategy elements in game play. They further constitute good practices in programming. This work evaluates how serious games based on visual programming as a solution synthesis tool within exploration, inquiry, and collaboration can help learners build structured mindsets. It analyses how a visual programming environment that supports experimentation for building intuition on potential solutions to logical puzzles, and then encourages learners to synthesize a solution interactively, helps learners through gaming principles to build self-esteem on their problem solving ability, to develop algorithmic thinking capacity, and to stay engaged in learning.

Description of occupant behaviour in building energy simulation: state-of-art and concepts for improvements

DEFF Research Database (Denmark)

Fabi, Valentina; Andersen, Rune Vinther; Corgnati, Stefano Paolo

2011-01-01

of basic assumptions that affect the results. Therefore, the calculated energy performance may differ significantly from the real energy consumption. One of the key reasons is the current inability to properly model occupant behaviour and to quantify the associated uncertainties in building performance...... predictions. By consequence, a better description of parameters related to occupant behaviour is highly required. In this paper, the state of art in occupant behaviour modelling within energy simulation tools is analysed and some concepts related to possible improvements of simulation tools are proposed...

IT-investigation in the building construction industry

DEFF Research Database (Denmark)

Sørensen, Lars Schiøtt

1995-01-01

An investigation of the level of computing in the Danish construction industry. A quantitative and qualitative level was stated among architects, engineers, building owners, contractors a.o. use of computing......An investigation of the level of computing in the Danish construction industry. A quantitative and qualitative level was stated among architects, engineers, building owners, contractors a.o. use of computing...

Redesigning Strategy for Irregular War: Improving Strategic Design for Planners and Policymakers to Help Defeat Groups Like the Islamic State

Science.gov (United States)

2016-12-01

Represent a Threat to the United States?,” The Hill, 03 October 2014; Brian Michael Jenkins , “What Could U.S. Boots on the Ground Do in Iraq and...Syria?,” Defense One, 15 October 2014; Brian Michael Jenkins , “Any review of Syria and Iraq strategy needs realistic reappraisal,” The Hill, 28 September...recalls his effort to help General Henri E. Navarre describe end states in the war to preserve French control of what was then Indochina:29 When

Energy Consumption Forecasting for University Sector Buildings

Directory of Open Access Journals (Sweden)

Khuram Pervez Amber

2017-10-01

Full Text Available Reliable energy forecasting helps managers to prepare future budgets for their buildings. Therefore, a simple, easier, less time consuming and reliable forecasting model which could be used for different types of buildings is desired. In this paper, we have presented a forecasting model based on five years of real data sets for one dependent variable (the daily electricity consumption and six explanatory variables (ambient temperature, solar radiation, relative humidity, wind speed, weekday index and building type. A single mathematical equation for forecasting daily electricity usage of university buildings has been developed using the Multiple Regression (MR technique. Data of two such buildings, located at the Southwark Campus of London South Bank University in London, have been used for this study. The predicted test results of MR model are examined and judged against real electricity consumption data of both buildings for year 2011. The results demonstrate that out of six explanatory variables, three variables; surrounding temperature, weekday index and building type have significant influence on buildings energy consumption. The results of this model are associated with a Normalized Root Mean Square Error (NRMSE of 12% for the administrative building and 13% for the academic building. Finally, some limitations of this study have also been discussed.

Pay Now or Pay Later: An Economic Rationale for State-Funded Helping Services to Assist Women Leaving an Abusive Relationship.

Science.gov (United States)

DeRiviere, Linda

2015-01-01

There has been an increase in costing analysis of intimate partner violence in recent decades, including the monetary impact to government, society, and the individual. Using data collected in a Canadian longitudinal study, the empirical analysis in this article provides an economic rationale for mobilizing public resources that improve the well-being of women leaving an abusive relationship. I estimated six variants of a selection model and used a costing exercise to build an economic case for preventive and other helping services to support women over their healing journey. The removal of financial constraints suffered by abused women, in support of their training needs, as well as reduced barriers to preventive health care services, may potentially lead to fiscal resource savings in the long run.

RCrane: semi-automated RNA model building.

Science.gov (United States)

Keating, Kevin S; Pyle, Anna Marie

2012-08-01

RNA crystals typically diffract to much lower resolutions than protein crystals. This low-resolution diffraction results in unclear density maps, which cause considerable difficulties during the model-building process. These difficulties are exacerbated by the lack of computational tools for RNA modeling. Here, RCrane, a tool for the partially automated building of RNA into electron-density maps of low or intermediate resolution, is presented. This tool works within Coot, a common program for macromolecular model building. RCrane helps crystallographers to place phosphates and bases into electron density and then automatically predicts and builds the detailed all-atom structure of the traced nucleotides. RCrane then allows the crystallographer to review the newly built structure and select alternative backbone conformations where desired. This tool can also be used to automatically correct the backbone structure of previously built nucleotides. These automated corrections can fix incorrect sugar puckers, steric clashes and other structural problems.

Energy efficiency of high-rise buildings

Science.gov (United States)

Zhigulina, Anna Yu.; Ponomarenko, Alla M.

2018-03-01

The article is devoted to analysis of tendencies and advanced technologies in the field of energy supply and energy efficiency of tall buildings, to the history of the emergence of the concept of "efficiency" and its current interpretation. Also the article show the difference of evaluation criteria of the leading rating systems LEED and BREEAM. Authors reviewed the latest technologies applied in the construction of energy efficient buildings. Methodological approach to the design of tall buildings taking into account energy efficiency needs to include the primary energy saving; to seek the possibility of production and accumulation of alternative electric energy by converting energy from the sun and wind with the help of special technical devices; the application of regenerative technologies.

How Building Systems Affect Worker Wellness

Science.gov (United States)

1994-03-01

spatial configuration must strike a balance between the objective needs of the organization and the more subjective human ingredient. Good building...sense, building design for thermal comfort involves a balance between the building’s orientation, its windowing scheme, the use of thermal mass, and the...stated above. An improved quality of worklife and a humanized work environment are psychological incentives that can increase productivity. Worker specific

A Practical Guide for Commissioning Existing Buildings

Energy Technology Data Exchange (ETDEWEB)

Haasl, T.

1999-05-11

Although this guide focuses on the retrocommissioning process and its advantages, all three types of commissioning--retrocommissioning, commissioning, and recommissioning--play an equally important role in ensuring that buildings perform efficiently and provide comfortable, safe, and productive work environments for owners and occupants. For new construction and retrofit projects, commissioning should be incorporated early, during design, and last throughout the length of the project. For buildings that were never commissioned, the retrocommissioning process can yield a wealth of cost-saving opportunities while enhancing a building's environment. Finally, once a building is commissioned or retrocommissioned, incorporating recommissioning into the organization's O and M program (by periodically reapplying the original diagnostic testing and checklist procedures) helps ensure that cost savings and other benefits gained from the original process persist over time.

A Practical Guide for Commissioning Existing Buildings

Energy Technology Data Exchange (ETDEWEB)

Haasl, T.; Sharp, T.

1999-04-01

Although this guide focuses on the retrocommissioning process and its advantages, all three types of commissioning--retrocommissioning, commissioning, and recommissioning--play an equally important role in ensuring that buildings perform efficiently and provide comfortable, safe, and productive work environments for owners and occupants. For new construction and retrofit projects, commissioning should be incorporated early, during design, and last throughout the length of the project. For buildings that were never commissioned, the retrocommissioning process can yield a wealth of cost-saving opportunities while enhancing a building's environment. Finally, once a building is commissioned or retrocommissioned, incorporating recommissioning into the organization's O and M program (by periodically reapplying the original diagnostic testing and checklist procedures) helps ensure that cost savings and other benefits gained from the original process persist over time.

On Planning and Managing the Preservation of Historical Buildings

Directory of Open Access Journals (Sweden)

Č. Jarský

2003-01-01

Full Text Available The process of preserving and reconstructing historical buildings poses several specific questions and raises problems which must be solved in the planning and management stage of the building process - from questions of architectural and art-historical significance, via the future purpose of use of the building, links to the surrounding buildings, environmental questions, questions of cost, time analysis, and quality assurance problems. Many of these problems can be solved with the help of a computer model of the course of the rehabilitation and reconstruction of the building created by a construction technology network diagram. The CONTEC integrated project planning, management and quality control system based on these diagrams has been used for bidding, planning and managing the reconstruction process of several significant historical buildings in Prague and other cities.

Impacts of building information modeling on facility maintenance management

Energy Technology Data Exchange (ETDEWEB)

Ahamed, Shafee; Neelamkavil, Joseph; Canas, Roberto [Centre for Computer-assisted Construction Technologies, National Research Council of Canada, London, Ontario (Canada)

2010-07-01

Building information modeling (BIM) is a digital representation of the physical and functional properties of a building; it has been used by construction professionals for a long time and stakeholders are now using it in different aspects of the building lifecycle. This paper intends to present how BIM impacts the construction industry and how it can be used for facility maintenance management. The maintenance and operations of buildings are in most cases still managed through the use of drawings and spreadsheets although life cycle costs of a building are significantly higher than initial investment costs; thus, the use of BIM could help in achieving a higher efficiency and so important benefits. This study is part of an ongoing research project, the nD modeling project, which aims at predicting building energy consumption with better accuracy.

Building energy efficiency in different climates

International Nuclear Information System (INIS)

Lam, Joseph C.; Wan, Kevin K.W.; Tsang, C.L.; Yang Liu

2008-01-01

Energy simulation was conducted for office buildings in the five major climate zones - severe cold, cold, hot summer and cold winter, mild, and hot summer and warm winter - in China using DOE-2.1E. The primary aim was to investigate the thermal and energy performance of office buildings with centralised heating, ventilation and air conditioning plants in the major climatic zones in China. The computed results were analysed in three aspects - heating load, cooling load and the corresponding building energy consumption. The building peak monthly heating load varied from 142 MW h (1033 MW h cooling) in Hong Kong to 447 MW h (832 MW h cooling) in Harbin. It was also found that passive solar designs could have large energy savings potential in the severe cold and cold climates. In Harbin, the window solar component helped lower the annual building heating load by 650 MW h. Internal loads (lighting and office equipment) and part load operations of fans and pumps also played a significant role in the overall building energy efficiency. This paper presents the work, its findings and energy efficiency implications

Optimal tree design for daylighting in residential buildings

Energy Technology Data Exchange (ETDEWEB)

Hongbing, Wang [College of Landscape Architecture, Beijing Forestry University, 35, East Qinghua Rd., Beijing (China); Shanghai Botanical Garden, 1111, Longwu Rd., Shanghai (China); Jun, Qin; Yonghong, Hu [Shanghai Botanical Garden, 1111, Longwu Rd., Shanghai (China); Li, Dong [College of Landscape Architecture, Beijing Forestry University, 35, East Qinghua Rd., Beijing (China)

2010-12-15

Urban reforestation is advocated as an efficient countermeasure to the intensification of urban heat islands. The greening and beautification of residential quarters is one of the main concerns of residents, while lighting and ventilation are two main energy-consuming building services. Hence, the tree layout in green space between buildings is important, and it is necessary to determine the relationships between trees and buildings. This study takes Shanghai as a case study to optimize tree design between residential buildings and meet good daylighting requirements. Models were made using software such as AutoCAD and SketchUp. The relationships between maximum tree height and building separation were determined. For the same building layout, there were different tree height limits according to crown shape; the order of decreasing height limits was cylindrical, conical, spherical, and inverted conical crowns. Three cases having different green space between building layouts were studied. Their maximum tree heights differed. Overall, our model helps us realize good daylighting of a building environment. The formula allows us to determine which trees to plant between buildings in that we can predict the effects of future tree growth on building daylighting. (author)

Obama administration's National Drought Resilience Partnership to help

Science.gov (United States)

RESEARCH COASTS CAREERS National Oceanic and Atmospheric Administration, United States Department of Administration today announced an interagency National Drought Resilience Partnership to help communities better across the nation, and the Obama Administration took every possible measure to help," said

Courthouse Prototype Building

Energy Technology Data Exchange (ETDEWEB)

Malhotra, Mini [ORNL; New, Joshua Ryan [ORNL; Im, Piljae [ORNL

2018-02-01

represent a majority of courthouse buildings. However, collectively they comprise a small fraction of total courthouse floor area in the US. Spaces and operation of courthouse also varies depending on the court type (federal court vs state court; district, appellate, versus Supreme Court) and jurisdiction (general jurisdiction, general jurisdiction trial, or special courts). Based on the statistics on courthouses, general jurisdiction trial court is considered for the prototype model. The model is assumed to be a 4-courtroom, small, 72,000 sqft three-story building including a ground level/ basement.

Projective loop quantum gravity. I. State space

Science.gov (United States)

Lanéry, Suzanne; Thiemann, Thomas

2016-12-01

Instead of formulating the state space of a quantum field theory over one big Hilbert space, it has been proposed by Kijowski to describe quantum states as projective families of density matrices over a collection of smaller, simpler Hilbert spaces. Beside the physical motivations for this approach, it could help designing a quantum state space holding the states we need. In a latter work by Okolów, the description of a theory of Abelian connections within this framework was developed, an important insight being to use building blocks labeled by combinations of edges and surfaces. The present work generalizes this construction to an arbitrary gauge group G (in particular, G is neither assumed to be Abelian nor compact). This involves refining the definition of the label set, as well as deriving explicit formulas to relate the Hilbert spaces attached to different labels. If the gauge group happens to be compact, we also have at our disposal the well-established Ashtekar-Lewandowski Hilbert space, which is defined as an inductive limit using building blocks labeled by edges only. We then show that the quantum state space presented here can be thought as a natural extension of the space of density matrices over this Hilbert space. In addition, it is manifest from the classical counterparts of both formalisms that the projective approach allows for a more balanced treatment of the holonomy and flux variables, so it might pave the way for the development of more satisfactory coherent states.

Building and Verifying a Predictive Model of Interruption Resumption

Science.gov (United States)

2012-03-01

the gardener to remember those plants (and whether they need to be removed), and so will not commit resources to remember that information . The overall...camera), the storyteller needed help much less often. This result suggests that when there is no one to help them remember the last thing they said...INV ITED P A P E R Building and Verifying a Predictive Model of Interruption Resumption Help from a robot, to allow a human storyteller to continue

Museum as spacecraft: a building in virtual space

Science.gov (United States)

Aguilera, Julieta C.

2014-02-01

This paper presents several immersion and interaction related visualizations that engage visitors in the context of an astronomy museum in order to help them build a mental model of the building as a whole, corresponding to the body of a spacecraft, and its parts considered individually, corresponding to the knowledge articulated from different scales in the Universe. Aspects of embodiment are utilized to find parallels with current trans-disciplinary theoretical developments in media arts.

Country Report on Building Energy Codes in China

Energy Technology Data Exchange (ETDEWEB)

Shui, Bin; Evans, Meredydd; Lin, H.; Jiang, Wei; Liu, Bing; Song, Bo; Somasundaram, Sriram

2009-04-15

This report is part of a series of reports on building energy efficiency codes in countries associated with the Asian Pacific Partnership (APP) - Australia, South Korea, Japan, China, India, and the United States of America (U.S.). This reports gives an overview of the development of building energy codes in China, including national energy policies related to building energy codes, history of building energy codes, recent national projects and activities to promote building energy codes. The report also provides a review of current building energy codes (such as building envelope and HVAC) for commercial and residential buildings in China.

Country Report on Building Energy Codes in Japan

Energy Technology Data Exchange (ETDEWEB)

Evans, Meredydd; Shui, Bin; Takagi, T.

2009-04-15

This report is part of a series of reports on building energy efficiency codes in countries associated with the Asian Pacific Partnership (APP) - Australia, South Korea, Japan, China, India, and the United States of America (U.S.). This reports gives an overview of the development of building energy codes in Japan, including national energy policies related to building energy codes, history of building energy codes, recent national projects and activities to promote building energy codes. The report also provides a review of current building energy codes (such as building envelope, HVAC, and lighting) for commercial and residential buildings in Japan.

Country Report on Building Energy Codes in Australia

Energy Technology Data Exchange (ETDEWEB)

Shui, Bin; Evans, Meredydd; Somasundaram, Sriram

2009-04-02

This report is part of a series of reports on building energy efficiency codes in countries associated with the Asian Pacific Partnership (APP) - Australia, South Korea, Japan, China, India, and the United States of America (U.S.). This reports gives an overview of the development of building energy codes in Australia, including national energy policies related to building energy codes, history of building energy codes, recent national projects and activities to promote building energy codes. The report also provides a review of current building energy codes (such as building envelope, HVAC, and lighting) for commercial and residential buildings in Australia.

Country Report on Building Energy Codes in Canada

Energy Technology Data Exchange (ETDEWEB)

Shui, Bin; Evans, Meredydd

2009-04-06

This report is part of a series of reports on building energy efficiency codes in countries associated with the Asian Pacific Partnership (APP) - Australia, South Korea, Japan, China, India, and the United States of America . This reports gives an overview of the development of building energy codes in Canada, including national energy policies related to building energy codes, history of building energy codes, recent national projects and activities to promote building energy codes. The report also provides a review of current building energy codes (such as building envelope, HVAC, lighting, and water heating) for commercial and residential buildings in Canada.

Build an Inexpensive Wind Tunnel to Test CO2 Cars

Science.gov (United States)

McCormick, Kevin

2012-01-01

As part of the technology education curriculum, the author's eighth-grade students design, build, test, and race CO2 vehicles. To help them in refining their designs, they use a wind tunnel to test for aerodynamic drag. In this article, the author describes how to build a wind tunnel using inexpensive, readily available materials. (Contains 1…

Tracking Changes in Buildings over Time

DEFF Research Database (Denmark)

Tamke, Martin; Zwierzycki, Mateusz; Evers, Henrik Leander

2016-01-01

Architectural and Engineering Communities are interested in the detection of differences between different representations of the same building. These can be the differences between the design and the as-built-state of a building, or the detection of changes that occur over time and that are docu...

1995 building energy codes and standards workshops: Summary and documentation

Energy Technology Data Exchange (ETDEWEB)

Sandahl, L.J.; Shankle, D.L.

1996-02-01

During the spring of 1995, Pacific Northwest National Laboratory (PNNL) conducted four two-day Regional Building Energy Codes and Standards workshops across the US. Workshops were held in Chicago, Denver, Rhode Island, and Atlanta. The workshops were designed to benefit state-level officials including staff of building code commissions, energy offices, public utility commissions, and others involved with adopting/updating, implementing, and enforcing building energy codes in their states. The workshops provided an opportunity for state and other officials to learn more about residential and commercial building energy codes and standards, the role of the US Department of Energy and the Building Standards and Guidelines Program at Pacific Northwest National Laboratory, Home Energy Rating Systems (HERS), Energy Efficient Mortgages (EEM), training issues, and other topics related to the development, adoption, implementation, and enforcement of building energy codes. Participants heard success stories, got tips on enforcement training, and received technical support materials. In addition to receiving information on the above topics, workshop participants had an opportunity to provide input on code adoption issues, building industry training issues, building design issues, and exemplary programs across the US. This paper documents the workshop planning, findings, and follow-up processes.

The impact of building orientation and discount rates on a Portuguese reference building refurbishment decision

International Nuclear Information System (INIS)

Brandão de Vasconcelos, Ana; Cabaço, António; Pinheiro, Manuel Duarte; Manso, Armando

2016-01-01

Refurbishment, as part of the construction industry, has a strong global impact, not only from the viewpoint of economies but also from social and energy-efficiency perspectives. A thermal refurbishment process, in particular, involves numerous decisions and choices; the decision-makers being ultimately confronted with two major questions: which criterion should be adopted in the choice of the refurbishment construction solutions and which refurbishment construction solutions should be chosen? In this paper, a criterion based on technical and economic points of view is proposed, aiming to identify the cost-optimal package of energy efficient solutions from among a set of possible refurbishment measures, within the life cycle of buildings. Sensitivity analyses are also performed so that the results may help the decision-maker choose the appropriate refurbishment solutions to be adopted when different discount rates and building orientations are taken into consideration. A total of seven scenarios, for a macroeconomic perspective, and nine, for a financial perspective, are performed. The costoptimal methodology adopted, following the Directive 2010/31/EU (2010) recommendations, is applied to a Portuguese reference building. The analysis carried out allows obtaining low global life cycle costs solutions and points towards nearly Zero Energy Building (nZEB) concept. The results are important for drawing national political instruments on buildings energy efficiency. - Highlights: •Building refurbishment decision based on technical and economic points of view. •35.000 Packages of thermal rehabilitation solutions considered. •Building orientation and discount rate impact on the cost-optimal package of solutions. •Portuguese reference building case base.

Summary of Building Protection Factor Studies for External Exposure to Ionizing Radiation

Energy Technology Data Exchange (ETDEWEB)

Dillon, Michael B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kane, Jave [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Nasstrom, John [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Homann, Steve [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Pobanz, Brenda [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-02-17

Radiation dose assessments are used to help inform decisions to minimize health risks in the event of an atmospheric release of radioactivity including, for example, from a Radiological Dispersal Device, an Improvised Nuclear Device detonation, or a Nuclear Power Plant accident. During these incidents, radiation dose assessments for both indoor and outdoor populations are needed to make informed decisions. These dose assessments inform emergency plans and decisions including, for example, identifying areas in which people should be sheltered and determining when controlled population evacuations should be made. US dose assessment methodologies allow consideration of the protection, and therefore dose reduction, that buildings provide their occupants. However, these methodologies require an understanding of the protection provided by various building types that is currently lacking. To help address this need, Lawrence Livermore National Laboratory, in cooperation with Sandia National Laboratories and the Nuclear Regulatory Commission, was tasked with (a) identifying prior building protection studies, (b) extracting results relevant to US building construction, and (c) summarizing building protection by building type. This report focuses primarily on the protection against radiation from outdoor fallout particles (external gamma radiation).

Summary of Building Protection Factor Studies for External Exposure to Ionizing Radiation

International Nuclear Information System (INIS)

Dillon, Michael B.; Kane, Jave; Nasstrom, John; Homann, Steve; Pobanz, Brenda

2016-01-01

Radiation dose assessments are used to help inform decisions to minimize health risks in the event of an atmospheric release of radioactivity including, for example, from a Radiological Dispersal Device, an Improvised Nuclear Device detonation, or a Nuclear Power Plant accident. During these incidents, radiation dose assessments for both indoor and outdoor populations are needed to make informed decisions. These dose assessments inform emergency plans and decisions including, for example, identifying areas in which people should be sheltered and determining when controlled population evacuations should be made. US dose assessment methodologies allow consideration of the protection, and therefore dose reduction, that buildings provide their occupants. However, these methodologies require an understanding of the protection provided by various building types that is currently lacking. To help address this need, Lawrence Livermore National Laboratory, in cooperation with Sandia National Laboratories and the Nuclear Regulatory Commission, was tasked with (a) identifying prior building protection studies, (b) extracting results relevant to US building construction, and (c) summarizing building protection by building type. This report focuses primarily on the protection against radiation from outdoor fallout particles (external gamma radiation).

Building a better future: Contributions of nuclear science and technology

International Nuclear Information System (INIS)

1998-02-01

Food, health, energy, industry and the environment. The fields could not be more diverse. Yet they are all linked in one universe - the worldwide research and development activities of the IAEA's Department of Research and Isotopes. These are just a few of many examples where nuclear-based technologies are helping to understand and provide constructive solutions to today's economic and social problems. The development of these technologies through the IAEA's Research Contract Programme and their extension through its Technical Co-operation (TC) Programme and information services encourage specialists in Member States to transform scientific results into knowledge, products and services which benefit society at large. In each of these sectors, the Department's activities foster leadership and international cooperation in applying nuclear technology to everyday scientific, technological and socio-economic problems. Together with international meetings, they add to the collective knowledge within Member States that supports capacity building and end-user oriented development projects supported by the TC Programme

Building a better future: Contributions of nuclear science and technology

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-02-01

Food, health, energy, industry and the environment. The fields could not be more diverse. Yet they are all linked in one universe - the worldwide research and development activities of the IAEA`s Department of Research and Isotopes. These are just a few of many examples where nuclear-based technologies are helping to understand and provide constructive solutions to today`s economic and social problems. The development of these technologies through the IAEA`s Research Contract Programme and their extension through its Technical Co-operation (TC) Programme and information services encourage specialists in Member States to transform scientific results into knowledge, products and services which benefit society at large. In each of these sectors, the Department`s activities foster leadership and international cooperation in applying nuclear technology to everyday scientific, technological and socio-economic problems. Together with international meetings, they add to the collective knowledge within Member States that supports capacity building and end-user oriented development projects supported by the TC Programme

Building America House Performance Analysis Procedures

Energy Technology Data Exchange (ETDEWEB)

Hendron, R.; Farrar-Nagy, S.; Anderson, R.; Judkoff, R.

2001-10-29

As the Building America Program has grown to include a large and diverse cross section of the home building industry, accurate and consistent analysis techniques have become more important to help all program partners as they perform design tradeoffs and calculate energy savings for prototype houses built as part of the program. This document illustrates some of the analysis concepts proven effective and reliable for analyzing the transient energy usage of advanced energy systems as well as entire houses. The analysis procedure described here provides a starting point for calculating energy savings of a prototype house relative to two base cases: builder standard practice and regional standard practice. Also provides building simulation analysis to calculate annual energy savings based on side-by-side short-term field testing of a prototype house.

Role of Self-help Group in Substance Addiction Recovery

Science.gov (United States)

Das, Prangya Paramita Priyadarshini

2012-11-01

Background: The Narcotics Anonymous (NA)/Alcoholic Anonymous(AA) is based on the philosophy of self-help, where the former addicts and recovering addicts share experiences, provide emotional support and do active monitoring through mentoring. In mentoring, a former addict with longer duration of drug-free life acts as a guide to the newly recovering addict. Objective: The objective was to study the effect of involvement in self help group upon addictís level of depression, functional social support, and anxiety. Method: The size of the sample was 60. 30 addicts were taken from rehabilitation centre and 30 were taken from self-help groups. ANOVA was used to analyze the result. Result: In all the criteria it was found that there exists a significant impact of Self-help group. Conclusion: Self-help group provide clients with a social network of individuals with similar problems and experiences, since most of these individuals may be isolated from society due to the social stigma attached to their addictions. The transition from being help recipients to being helpers enables recovering addicts to build their self-confidence and feelings of being wanted and desired in society, which facilitates their self-confidence and positive self-esteem.

Building Web Apps for Google TV

CERN Document Server

Ferrate, Andres; Lee, Daniels; Ohye, Maile; Carff, Paul; Shen, Shawn; Hines, Steven

2011-01-01

By integrating the Web with traditional TV, Google TV offers developers an important new channel for content. But creating apps for Google TV requires learning some new skills-in fact, what you may already know about mobile or desktop web apps isn't entirely applicable. Building Web Apps for Google TV will help you make the transition to Google TV as you learn the tools and techniques necessary to build sophisticated web apps for this platform. This book shows you how Google TV works, how it fits into the web ecosystem, and what the opportunities are for delivering rich content to millions o

Application of 6D Building Information Model (6D BIM) for Business-storage Building in Slovenia

Science.gov (United States)

Pučko, Zoran; Vincek, Dražen; Štrukelj, Andrej; Šuman, Nataša

2017-10-01

The aim of this paper is to present an application of 6D building information modelling (6D BIM) on a real business-storage building in Slovenia. First, features of building maintenance in general are described according to the current Slovenian legislation, and also a general principle of BIM is given. After that, step-by-step activities for modelling 6D BIM are exposed, namely from Element list for maintenance, determination of their lifetime and service measures, cost analysing and time analysing to 6D BIM modelling. The presented 6D BIM model is designed in a unique way in which cost analysis is performed as 5D BIM model with linked data to use BIM Construction Project Management Software (Vico Office), integrated with 3D BIM model, whereas time analysis as 4D BIM model is carried out as non-linked data with the help of Excel (without connection to 3D BIM model). The paper is intended to serve as a guide to the building owners to prepare 6D BIM and to provide an insight into the relevant dynamic information about intervals and costs for execution of maintenance works in the whole building lifecycle.

Compensatory help-seeking in young and older adults: does seeking help, help?

Science.gov (United States)

Alea, Nicole; Cunningham, Walter R

2003-01-01

Asking other people for help is a compensatory behavior that may be useful across the life span to enhance functioning. Seventy-two older and younger men and women were either allowed to ask for help or were not allowed to ask for help while solving reasoning problems. Although the older adults answered fewer problems correctly, they did not seek additional help to compensate for their lower levels of performance. Younger adults sought more help. There were no age differences, however, in the types of help sought: indirect help (e.g., hints) was sought more often than direct help (e.g., asking for the answer). Exploratory analyses revealed that one's ability level was a better indicator than age of the utility of help-seeking. Findings are interpreted in the context of social and task-related influences on the use of help-seeking as a compensatory behavior across the life span.

Environmental Discourse: Helping Graduate Students Build Effective Deliberation and Communication Skills

Science.gov (United States)

Huntzinger, D. N.; Downard, J.; Nielsen, E.

2015-12-01

The environmental sciences are at the forefront of critical issues facing society in the coming decades. As a result, many graduates in the environmental sciences find themselves working with the public to help inform the democratic process of making reasonable public policies. In order to be successful, students need to be confronted with the same kinds of questions and problems that practicing scientists face when they are working at the intersection of science and public policy. Otherwise, they lack the skills and confidence needed to work effectively with the public—especially on hotly contested environmental issues when the skills are needed the most. As part of a new Professional Science Master's (PSM) Program in Climate Science and Solutions at Northern Arizona University we have developed a three-semester course series focused on framing discussions on climate change mitigation and adaptation. Each semester, students use a deliberative model to design, frame, and facilitate a public discussion on a targeted issue of regional and local interest. The deliberative model is built around an approach to practical dilemmas that enables students to isolate and clarify the various sources of conflict around the issue. Working in an iterative manner, students learn to identify and untangling some of the sources of disagreement (e.g., policy, ethics and ideals, difference in scientific understanding) around and issue. As a result, students are in a much better position to clarify the key questions and sort through the competing solutions. The course series helps to improve the communication skills of students and promote productive public discourse with individuals from diverse backgrounds within the community. This type of experiential learning provides unique training to our students that not only broadens there understanding of complex issues surrounding climate change, but also provides them with professional skills that are transferrable to their careers.

Recorded motions of the 6 April 2009 Mw 6.3 L'Aquila, Italy, earthquake and implications for building structural damage: Overview

Science.gov (United States)

Celebi, M.; Bazzurro, P.; Chiaraluce, L.; Clemente, P.; Decanini, L.; Desortis, A.; Ellsworth, W.; Gorini, A.; Kalkan, E.; Marcucci, S.; Milana, G.; Mollaioli, F.; Olivieri, M.; Paolucci, R.; Rinaldis, D.; Rovelli, A.; Sabetta, F.; Stephens, C.

2010-01-01

The normal-faulting earthquake of 6 April 2009 in the Abruzzo Region of central Italy caused heavy losses of life and substantial damage to centuriesold buildings of significant cultural importance and to modern reinforcedconcrete- framed buildings with hollow masonry infill walls. Although structural deficiencies were significant and widespread, the study of the characteristics of strong motion data from the heavily affected area indicated that the short duration of strong shaking may have spared many more damaged buildings from collapsing. It is recognized that, with this caveat of shortduration shaking, the infill walls may have played a very important role in preventing further deterioration or collapse of many buildings. It is concluded that better new or retrofit construction practices that include reinforcedconcrete shear walls may prove helpful in reducing risks in such seismic areas of Italy, other Mediterranean countries, and even in United States, where there are large inventories of deficient structures. ?? 2010, Earthquake Engineering Research Institute.

Building Condition and Suitability Evaluation Manual.

Science.gov (United States)

MGT of America, Inc., Tallahassee, FL.

This educational facility evaluation manual contains the overall building condition rating form and the supporting check sheets which have been field tested in several states and, where appropriate, modified for use in the Idaho School Facilities Needs Assessment. The exterior building condition form examines the foundation, structure, walls,…

A New Look at Building Facades as Infrastructure

Directory of Open Access Journals (Sweden)

Doris Sung

2016-03-01

Full Text Available Like the hard surfaces of streets and sidewalks in an urban environment, the vertical and horizontal surface area on the outside of urban buildings contributes to the constant heating of large cities around the world. However, little is done to design this surface to benefit the public sphere. Instead, the facade of a building performs either as a component that focuses only on the quality of comfort for interior occupants, while ignoring effects on the exterior of the building, or as an identifiable aesthetic for the building's owners. This essay proposes the rethinking of the building facade as a steward of outdoor pedestrian welfare, and the conception of public health as an added function of the building envelope−a concept that may fall into the jurisdiction of public works. If the huge total surface area of a city's buildings is thought of as part of the city's infrastructure, then its public contribution may not only make outdoor areas comfortable, clean, and enjoyable, but also help to alleviate the bigger problem of rising temperatures in cities.

Building information deduced

DEFF Research Database (Denmark)

Tamke, Martin; Myrup Jensen, Morten; Beetz, Jakob

2014-01-01

In recent years, Building Information Models have become commonplace in building profession. The extensive use and increasing experience with BIM models offers new perspectives and potentials for design and planning. A recent stakeholder study conducted by the authors of this paper show that in p......In recent years, Building Information Models have become commonplace in building profession. The extensive use and increasing experience with BIM models offers new perspectives and potentials for design and planning. A recent stakeholder study conducted by the authors of this paper show...... that in practice models are no longer solely observed as culmination of knowledge in a 3d representation of future built structures, but as a source of information in itself. Experienced users of BIM want to Find Information within a model or across a set of these and Compare models in order to evaluate states...... of a model, differences in separate models or models from different point of time. Current BIM tools support both modes only in a rudimentary form. This paper discusses current modes of information query within and across BIM models, shows beneficial scenarios for building and planning practice through...

Energy - efficient buildings in pakistan

International Nuclear Information System (INIS)

Sohail, M.; Qureshi, M.U.D.

2011-01-01

Pakistan is one of the countries with the highest energy consumption for domestic use. Annual energy consumption by the domestic sector is 45.9 % of the total, while the industrial sector, consumes about 27.5%. About half of the total energy consumed is used in buildings and/or heating, ventilation and air-conditioning (HVAC) and lighting appliances. The energy consumed for the same purposes in China and UK is 25 to 30 % and 40 %, respectively, even in extreme weather conditions. Energy deficiency in Pakistan is approximately 5,000 MWe, which results in worst load-shedding in summers and, lately, even in winters. Building new energy sources like dams, coal power plants and renewable energy power projects are some possible solutions, but these are time taking and need at least 2 to 6 years to complete, depending upon the nature of the project. Fast development of energy-efficient buildings is, therefore, necessary to deal with exacerbating energy-crisis and related environmental impact in Pakistan. Innovations in the prevailing building-design will help the country in reducing the energy burden. These innovations may include improved architectural designs, energy-efficient building materials, electrical appliances and implementation of building energy-efficiency codes. In 1987, the National Energy Conservation Centre (ENERCON), was established under Ministry of Environment, Government of Pakistan, with the aim to build awareness among the masses for energy conservation, and to make policies regarding energy-conservation structures in the country. But no policy regarding building energy codes has been introduced by ENERCON till now. In collaboration with Pakistan Engineering Council (PEC), ENERCON has recently finalized the Building Energy Code of Pakistan Energy Provisions 2011 for which statutory notification is under process for necessary amendment in the building by-laws. The implementation of this Energy Code will result in 25 to 30 % of energy savings in the

Building bridges in economics research: John Whalley (Canada ...

International Development Research Centre (IDRC) Digital Library (Canada)

2010-12-09

Dec 9, 2010 ... IDRC Communications ... in Waterloo, Canada, and Beijing Normal University, has helped to build a research network on poverty in ... This kind of research is essential for developing effective public policy to reduce inequality.

PV and PV/hybrid products for buildings

Energy Technology Data Exchange (ETDEWEB)

Thomas, H. P.; Hayter, S. J.; Martin, R. L., Pierce, L. K.

2000-05-15

Residential, commercial, and industrial buildings combined are the largest consumers of electricity in the United States and represent a significant opportunity for photovoltaic (PV) and PV/hybrid systems. The U.S. Department of Energy (DOE) is conducting a phased research and product development program, Building Opportunities in the United States for Photovoltaics (PV:BONUS), focused on this market sector. The purpose of the program is to develop technologies and foster business arrangements integrating cost-effective PV or hybrid products into buildings. The first phase was completed in 1996 and a second solicitation, PV:BONUS2, was initiated during 1997. These projects are resulting in a variety of building-integrated products. This paper summarizes the recent progress of the seven firms and collaborative teams currently participating in PV:BONUS2 and outlines planned work for the final phase of their work.

Building a Roll-Off Roof Observatory A Complete Guide for Design and Construction

CERN Document Server

Hicks, John

2009-01-01

Almost every practical astronomer who takes the pursuit to its second level aspires to a fixed, permanent housing for his telescope, permitting its rapid and comfortable use and avoiding hours of setting-up time for each observing session. A roll-off roof observatory is the simplest and by far the most popular observatory design for today’s practical astronomers. Building a Roll-off Roof Observatory will help you decide whether to embark on the venture and will certainly provoke your enthusiasm for the project. The author, both an amateur astronomer and professional landscape architect, answers many of the common questions asked around observatory construction covering the following topics: Site planning, zoning, and by-law requirements common to most states, towns and municipalities Opportunities for locating the observatory Tailoring the observatory for your particular use Tools and structural components required to build it Variations in footing design to suit your soil conditions Variations possible in ...

Methodology to build medical ontology from textual resources.

Science.gov (United States)

Baneyx, Audrey; Charlet, Jean; Jaulent, Marie-Christine

2006-01-01

In the medical field, it is now established that the maintenance of unambiguous thesauri goes through ontologies. Our research task is to help pneumologists code acts and diagnoses with a software that represents medical knowledge through a domain ontology. In this paper, we describe our general methodology aimed at knowledge engineers in order to build various types of medical ontologies based on terminology extraction from texts. The hypothesis is to apply natural language processing tools to textual patient discharge summaries to develop the resources needed to build an ontology in pneumology. Results indicate that the joint use of distributional analysis and lexico-syntactic patterns performed satisfactorily for building such ontologies.

Building sustainable neuroscience capacity in Africa: the role of non-profit organisations.

Science.gov (United States)

Karikari, Thomas K; Cobham, Ansa E; Ndams, Iliya S

2016-02-01

While advances in neuroscience are helping to improve many aspects of human life, inequalities exist in this field between Africa and more scientifically-advanced continents. Many African countries lack the infrastructure and appropriately-trained scientists for neuroscience education and research. Addressing these challenges would require the development of innovative approaches to help improve scientific competence for neuroscience across the continent. In recent years, science-based non-profit organisations (NPOs) have been supporting the African neuroscience community to build state-of-the-art scientific capacity for sustainable education and research. Some of these contributions have included: the establishment of training courses and workshops to introduce African scientists to powerful-yet-cost-effective experimental model systems; research infrastructural support and assistance to establish research institutes. Other contributions have come in the form of the promotion of scientific networking, public engagement and advocacy for improved neuroscience funding. Here, we discuss the contributions of NPOs to the development of neuroscience in Africa.

Energy and exergy assessments for an enhanced use of energy in buildings

Science.gov (United States)

Goncalves, Pedro Manuel Ferreira

Exergy analysis has been found to be a useful method for improving the conversion efficiency of energy resources, since it helps to identify locations, types and true magnitudes of wastes and losses. It has also been applied for other purposes, such as distinguishing high- from low-quality energy sources or defining the engineering technological limits in designing more energy-efficient systems. In this doctoral thesis, the exergy analysis is widely applied in order to highlight and demonstrate it as a significant method of performing energy assessments of buildings and related energy supply systems. It aims to make the concept more familiar and accessible for building professionals and to encourage its wider use in engineering practice. Case study I aims to show the importance of exergy analysis in the energy performance assessment of eight space heating building options evaluated under different outdoor environmental conditions. This study is concerned with the so-called "reference state", which in this study is calculated using the average outdoor temperature for a given period of analysis. Primary energy and related exergy ratios are assessed and compared. Higher primary exergy ratios are obtained for low outdoor temperatures, while the primary energy ratios are assumed as constant for the same scenarios. The outcomes of this study demonstrate the significance of exergy analysis in comparison with energy analysis when different reference states are compared. Case study II and Case study III present two energy and exergy assessment studies applied to a hotel and a student accommodation building, respectively. Case study II compares the energy and exergy performance of the main end uses of a hotel building located in Coimbra in central Portugal, using data derived from an energy audit. Case study III uses data collected from energy utilities bills to estimate the energy and exergy performance associated to each building end use. Additionally, a set of energy

Pediatric falls from buildings: defining the burden of injury in Hawai'i.

Science.gov (United States)

Sarkar, Joy; Wolfe, Stacey Q; Speck, Cora; Woods, Elizabeth; Lustik, Michael B; Edwards, Kurt D; Edwards, Mary J

2014-05-01

Falls from buildings, including houses, are an important cause of childhood injury in the United States; however, no study has previously examined the impact of this problem in Hawai'i. The objective of this study is to categorize the demographics and injury circumstances of pediatric falls from buildings in Hawai'i and compare to other US cities. Patients age 10 and under who were injured in nonfatal accidental falls from buildings in Hawai'i between 2005 and 2011 were identified retrospectively from a statewide repository of hospital billing data. The Hawai'i death certificate database was searched separately for deaths in children age 10 and under due to falls from buildings, with data available from 1991 through 2011. Data was reviewed for demographics, circumstances surrounding the injury, and level of hospital treatment. During the 7-year period for nonfatal injuries, 416 fall-related injuries were identified in children age 10 and younger. Of these, 86 required hospitalization. The rate of nonfatal injury in Hawai'i County was twice that of Honolulu and Maui Counties, and three times that of Kaua'i County. There were 9 fatal falls over a 21-year period. The population based incidence for nonfatal injuries was three-fold higher than that reported in the city of Dallas. The rate of hospitalizations following building falls was more than twice as high as the national average, and that of New York City, but similar to that of California. Strategies for education and environmental modification are reviewed, which may be helpful in reducing the incidence of pediatric falls from buildings in Hawai'i.

Buildings behaving badly

NARCIS (Netherlands)

Student, Jillian; Papyrakis, Elissaios; Beukering, van Pieter

2017-01-01

Heating buildings contributes to approximately 36 % of Europe’s energy demand and several EU member states have adopted mandatory energy labels to improve energy efficiency by promoting home weatherization investments. This paper focuses on the perception of the energy label for residential

Capacity building for sustainable energy development

International Nuclear Information System (INIS)

Rogner, Hans-Holger

2006-01-01

Capacity Building for Sustainable Energy Development - Mission: To build capacity in Member States (MS) for comprehensive energy system, economic and environmental analyses to assist in: - making informed policy decisions for sustainable energy development; - assessing the role of nuclear power; - understanding environmental and climate change issues related to energy production and use

BLAST-EXPLORER helps you building datasets for phylogenetic analysis

Directory of Open Access Journals (Sweden)

Claverie Jean-Michel

2010-01-01

Full Text Available Abstract Background The right sampling of homologous sequences for phylogenetic or molecular evolution analyses is a crucial step, the quality of which can have a significant impact on the final interpretation of the study. There is no single way for constructing datasets suitable for phylogenetic analysis, because this task intimately depends on the scientific question we want to address, Moreover, database mining softwares such as BLAST which are routinely used for searching homologous sequences are not specifically optimized for this task. Results To fill this gap, we designed BLAST-Explorer, an original and friendly web-based application that combines a BLAST search with a suite of tools that allows interactive, phylogenetic-oriented exploration of the BLAST results and flexible selection of homologous sequences among the BLAST hits. Once the selection of the BLAST hits is done using BLAST-Explorer, the corresponding sequence can be imported locally for external analysis or passed to the phylogenetic tree reconstruction pipelines available on the Phylogeny.fr platform. Conclusions BLAST-Explorer provides a simple, intuitive and interactive graphical representation of the BLAST results and allows selection and retrieving of the BLAST hit sequences based a wide range of criterions. Although BLAST-Explorer primarily aims at helping the construction of sequence datasets for further phylogenetic study, it can also be used as a standard BLAST server with enriched output. BLAST-Explorer is available at http://www.phylogeny.fr

Hygrothermal Behavior, Building Pathology and Durability

CERN Document Server

Delgado, JMPQ

2013-01-01

The main purpose of this book, Hygrothermal, Building Pathology and Durability, is to provide a collection of recent research works to contribute to the systematization and dissemination of knowledge related to construction pathology, hygrothermal behaviour of buildings, durability and diagnostic techniques and, simultaneously, to show the most recent advances in this domain. It includes a set of new developments in the field of building physics and hygrothermal behaviour, durability approach for historical and old buildings and building pathology vs. durability. The book is divided in several chapters that are a resume of the current state of knowledge for benefit of professional colleagues, scientists, students, practitioners, lecturers and other interested parties to network.

The state and prospects of development of Ukraine building market

Directory of Open Access Journals (Sweden)

Ovcharenko Darina

2015-08-01

Full Text Available Transformation processes and high level of bifurcations in the external socio-economic environment stipulated the requirement of realization of descriptive marketing researches of building market of Ukraine for decreasing the level of informative vagueness. The author examines timely awareness as a competitive advantage of a provider of building market, because providing the firm management with analytical conclusions about the change of marketing environment or efficiency of marketing instruments assists the decline of risk at making administrative decisions and perfection of the system of marketing management.

RISKS, VULNERABILITY AND DETERMINANTS OF WOMEN FARMERS’ PARTICIPATION IN SELF-HELP-GROUP (SHG-LED MICROFINANCING IN ISUIKWUATO, ABIA STATE, NIGERIA

Directory of Open Access Journals (Sweden)

Christopher Ogbonna EMEROLE

2014-10-01

Full Text Available This study on risks, vulnerability and determinants of women farmers’ participation in Self-Help-Group led micro financing was carried out in Isuikwuato local Government Area (LGA of Abia State in Nigeria. Two-stage random sampling and purposive sampling techniques were adopted in selecting communities and respondents. Socio- economic and some farm operation variables were analyzed descriptively and others regressed on discrete decision of women participating or not participating in Self-Help- group (SHG financing. Fire outbreak, ill health, theft, soil erosion and attack of farm products by pests and diseases were perceived (in this descending order as risks/natural disasters confronting the farmers. Previously owed debts, Ease of membership to groups, Age of the woman, Household size, and use of cultural/formal insurance over perceived risks were factors that influenced participation of women farmers in self-help-group micro financing. To ease the burden of inaccessibility to formal farm credit among women farmers, we recommended that relatively younger women should be encouraged to join older women in such mutual self-help groups to reap benefits accruable from the groups especially being able to manage their farms and households with less stress.

DGNB Building Certification Companion

DEFF Research Database (Denmark)

Møller, Renate Skovgaard; Rhodes, Michael K.; Larsen, Tine Steen

2017-01-01

for sustainable buildings. The literature describes several barriers of entry preventing actors in the industry from seeking sustainability certifications and prioritizing design methods, supporting sustainability in greater numbers. In the newly developed tool, “DGNB building certification companion: Sustainable......-language, easily digestible summaries of various topics regarding sustainability and the DGNB certification scheme. The identified barriers are described in the tool followed by a solution to overcome them. The tool, tested at multiple stages of development and moulded by many individuals both within and outside...... was that this is a desired product on the market. This new approach is expected to dramatically reduce misunderstandings, conflicts, and mistakes during a sustainable design process, helping the design team plan a project to possibly obtain the highest DGNB score if desired and properly documented....

DGNB BUILDING CERTIFICATION COMPANION

DEFF Research Database (Denmark)

Møller, Renate Skovgaard; Rhodes, Michael K.; Larsen, Tine Steen

2018-01-01

for sustainable buildings. The literature describes several barriers of entry preventing actors in the industry from seeking sustainability certifications and prioritizing design methods, supporting sustainability in greater numbers. In the newly developed tool, “DGNB building certification companion: Sustainable......-language, easily digestible summaries of various topics regarding sustainability and the DGNB certification scheme. The identified barriers are described in the tool followed by a solution to overcome them. The tool, tested at multiple stages of development and moulded by many individuals both within and outside...... was that this is a desired product on the market. This new approach is expected to dramatically reduce misunderstandings, conflicts, and mistakes during a sustainable design process, helping the design team plan a project to possibly obtain the highest DGNB score if desired and properly documented....

Job/Task Analysis: Enhancing the Commercial Building Workforce Through the Development of Foundational Materials; Preprint

Energy Technology Data Exchange (ETDEWEB)

Studer, D.; Kemkar, S.

2012-09-01

For many commercial building operation job categories, industry consensus has not been reached on the knowledge, skills, and abilities that practitioners should possess. The goal of this guidance is to help streamline the minimum competencies taught or tested by organizations catering to building operations and maintenance personnel while providing a basis for developing and comparing new and existing training programs in the commercial building sector. The developed JTAs will help individuals identify opportunities to enhance their professional skills, enable industry to identify an appropriately skilled workforce, and allow training providers to ensure that they are providing the highest quality product possible.

Women and Nation-Building

National Research Council Canada - National Science Library

Benard, Cheryl; Jones, Seth G; Oliker, Olga; Thurston, Cathryn Q; Stearns, Brooke K; Cordell, Kristen

2008-01-01

.... The RAND Corporation has contributed to the emerging knowledge base in this domain through a series of studies that have looked at nation-building enterprises led by the United States and others...

Development of a Training Program for Commercial Building Technicians

Energy Technology Data Exchange (ETDEWEB)

Rinholm, Rod

2013-05-31

This project focused on developing and deploying a comprehensive program of 22 training modules, including certification requirements, and accreditation standards for commercial building technicians, to help achieve the full savings potential of energy efficient buildings, equipment, and systems. This curriculum extended the currently available commercial building technician programs -- training a labor force in a growing market area focused on energy efficiency. The program helps to remove a major market impediment to low energy/zero energy commercial building system acceptance, namely a lack of operating personnel capable of handling more complex high efficiency systems. The project developed a training curriculum for commercial building technicians, with particular focus on high-efficiency building technology, and systems. In Phase 1, the project team worked collaboratively in developing a draft training syllabus to address project objectives. The team identified energy efficiency knowledge gaps in existing programs and plans and plans to address the gaps with either modified or new curricula. In Phase 2, appropriate training materials were developed to meet project objectives. This material was developed for alternative modes of delivery, including classroom lecture materials, e-learning elements, video segments, exercises, and hands-on training elements. A Certification and Accreditation Plan and a Commercialization and Sustainability Plan were also investigated and developed. The Project Management Plan was updated quarterly and provided direction on the management approaches used to accomplish the expected project objectives. GTI project management practices tightly coordinate project activities using management controls to deliver optimal customer value. The project management practices include clear scope definition, schedule/budget tracking, risk/issue resolution and team coordination.

Life cycle assessment: Existing building retrofit versus replacement

Science.gov (United States)

Darabi, Nura

The embodied energy in building materials constitutes a large part of the total energy required for any building (Thormark 2001, 429). In working to make buildings more energy efficient this needs to be considered. Integrating considerations about life cycle assessment for buildings and materials is one promising way to reduce the amount of energy consumption being used within the building sector and the environmental impacts associated with that energy. A life cycle assessment (LCA) model can be utilized to help evaluate the embodied energy in building materials in comparison to the buildings operational energy. This thesis takes into consideration the potential life cycle reductions in energy and CO2 emissions that can be made through an energy retrofit of an existing building verses demolition and replacement with a new energy efficient building. A 95,000 square foot institutional building built in the 1960`s was used as a case study for a building LCA, along with a calibrated energy model of the existing building created as part of a previous Masters of Building Science thesis. The chosen case study building was compared to 10 possible improvement options of either energy retrofit or replacement of the existing building with a higher energy performing building in order to see the life cycle relationship between embodied energy, operational energy, and C02 emissions. As a result of completing the LCA, it is shown under which scenarios building retrofit saves more energy over the lifespan of the building than replacement with new construction. It was calculated that energy retrofit of the chosen existing institutional building would reduce the amount of energy and C02 emissions associated with that building over its life span.

THE EVOLUTION OF THE DESIGN AND CONSTRUCTION OF MASONRY BUILDINGS IN THE UNITED STATES

Directory of Open Access Journals (Sweden)

Richard E. Klingner

2012-12-01

Full Text Available In this paper, the process used to develop building codes in the United States of America (USA is summarized, with emphasis on masonry. Masonry materials used in the USA are discussed. Types of masonry construction in the USA are reviewed, addressing historical as well as modern masonry. Current non-structural and structural applications of masonry in the USA are reviewed. Historical development of masonry codes in the USA is summarized, with emphasis on the current Masonry Standards Joint Committee (MSJC Code and Specification. Future trends in that document are predicted. The paper closes with a list of challenges to the masonry industry, and a list of focused research topics intended to meet those challenges.

DOE's Public Database for Green Building Case Studies: Preprint

Energy Technology Data Exchange (ETDEWEB)

Torcellini, P. A.; Crawley, D. B.

2003-11-01

To help capture valuable information on''green building'' case studies, the U.S. Department of Energy has created an online database for collecting, standardizing, and disseminating information about high-performance, green projects. Type of information collected includes green features, design processes, energy performance, and comparison to other high-performance, green buildings.

Analysis of the Chinese Market for Building Energy Efficiency

Energy Technology Data Exchange (ETDEWEB)

Yu, Sha [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Evans, Meredydd [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Shi, Qing [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2014-03-20

. This chapter examines insulation in walls and roofs; efficient windows and doors; heating, air conditioning and controls; and lighting. These markets have seen significant growth because of the strength of the construction sector but also the specific policies that require and promote efficient building components. At the same time, as requirements have become more stringent, there has been fierce competition, and quality has at time suffered, which in turn has created additional challenges. Next we examine existing buildings in chapter four. China has many Soviet-style, inefficient buildings built before stringent requirements for efficiency were more widely enforced. As a result, there are several specific market opportunities related to retrofits. These fall into two or three categories. First, China now has a code for retrofitting residential buildings in the north. Local governments have targets of the number of buildings they must retrofit each year, and they help finance the changes. The requirements focus on insulation, windows, and heat distribution. Second, the Chinese government recently decided to increase the scale of its retrofits of government and state-owned buildings. It hopes to achieve large scale changes through energy service contracts, which creates an opportunity for energy service companies. Third, there is also a small but growing trend to apply energy service contracts to large commercial and residential buildings. This report assesses the impacts of China’s policies on building energy efficiency. By examining the existing literature and interviewing stakeholders from the public, academic, and private sectors, the report seeks to offer an in-depth insights of the opportunities and barriers for major market segments related to building energy efficiency. The report also discusses trends in building energy use, policies promoting building energy efficiency, and energy performance contracting for public building retrofits.

Standard Compliance: Guidelines to Help State and Alternative Fuel Provider Fleets Meet Their Energy Policy Act Requirements, 10 CFR Part 490 (Book)

Energy Technology Data Exchange (ETDEWEB)

2014-03-01

This guidebook addresses the primary requirements of the Alternative Fuel Transportation Program to help state and alternative fuel provider fleets comply with the Energy Policy Act via the Standard Compliance option. It also addresses the topics that covered fleets ask about most frequently.

Building the nodal nuclear data dependences in a many-dimensional state-variable space

International Nuclear Information System (INIS)

Dufek, Jan

2011-01-01

Highlights: → The Abstract and Introduction are revised to reflect reviewers' comments. → Section is revised and simplified. → The third paragraph in Section is revised. → All typos are fixed. - Abstract: We present new methods for building the polynomial-regression based nodal nuclear data models. The data models can reflect dependences on a large number of state variables, and they can consider various history effects. Suitable multivariate polynomials that approximate the nodal data dependences are identified efficiently in an iterative manner. The history effects are analysed using a new sampling scheme for lattice calculations where the traditional base burnup and branch calculations are replaced by a large number of diverse burnup histories. The total number of lattice calculations is controlled so that the data models are built to a required accuracy.

2020 Leadership Agenda for Existing Commercial and Multifamily Buildings

Energy Technology Data Exchange (ETDEWEB)

Burr, Andrew [Dept. of Energy (DOE), Washington DC (United States). Office of Energy Efficiency and Renewable Energy; Goldthwaite, Carolyn Sarno [Northeast Energy Efficiency Partnerships (NEEP), Boston, MA (United States). High Performance Buildings; Coffman, Eric [Montgomery County Dept. of General Services, Rockville, MD (United States). Office of Energy and Sustainability

2016-01-21

Leadership by state and local governments is critical to unlock national energy efficiency opportunities and deliver the benefits of efficiency to all Americans. But related to building energy efficiency, what will it mean to be a public sector leader over the next several years? What are the energy efficiency solutions that cities, counties, and states are implementing today that will make their communities more affordable, livable, healthy, and economically competitive? The SEE Action Network 2020 Leadership Agenda for Existing Commercial and Multifamily Buildings establishes a benchmark for state and local government leadership on improving the energy efficiency of buildings and seeks two-way collaboration among state, local, and federal officials. It defines a suite of innovative, yet practical policies and programs for policymakers to consider implementing by 2020, focusing on six important areas.

A new method for studying the transport of radon and thoron in various building materials using CR-39 and LR-115 solid state nuclear track detectors

International Nuclear Information System (INIS)

Misdaq, M.A.; Ktata, A.; Bakhchi, A.

2000-01-01

Radon ( 222 Rn) and thoron ( 220 Rn) α-activities per unit volume were measured inside and outside different building materials by using two types of solid state nuclear track detectors (SSNTD) (CR-39 and LR-115 type II). In addition, the radon and thoron emanation coefficients of the studied materials were evaluated. Based on these data, the transport of radon and thoron across parallelepipedic blocks of the building materials could be investigated and radon and thoron global α-activities per unit volume outside different building material blocks were determined. Moreover, the diffusion length and the effective diffusion coefficient of radon in the building materials were evaluated and the total alpha activity due to radon in the atmospheres of different rooms consisting of different building materials was studied

Building America Best Practices Series: Volume 7.1: Guide to Determining Climate Regions by County

Energy Technology Data Exchange (ETDEWEB)

Baechler, Michael C.; Williamson, Jennifer L.; Gilbride, Theresa L.; Cole, Pamala C.; Hefty, Marye G.; Love, Pat M.

2010-08-30

This report for DOE's Building America program helps builders identify which Building America climate region they are building in. The guide includes maps comparing the Building America regions with climate designations used in the International Energy Conservation Code for Residential Buildings and lists all U.S. counties by climate zone. A very brief history of the development of the Building America climate map and descriptions of each climate zone are provided. This report is available on the Building America website www.buildingamerica.gov.

Indoor-Outdoor Air Leakage of Apartments and Commercial Buildings

Energy Technology Data Exchange (ETDEWEB)

Price, P.N.; Shehabi, A.; Chan, R.W.; Gadgil, A.J.

2006-06-01

We compiled and analyzed available data concerning indoor-outdoor air leakage rates and building leakiness parameters for commercial buildings and apartments. We analyzed the data, and reviewed the related literature, to determine the current state of knowledge of the statistical distribution of air exchange rates and related parameters for California buildings, and to identify significant gaps in the current knowledge and data. Very few data were found from California buildings, so we compiled data from other states and some other countries. Even when data from other developed countries were included, data were sparse and few conclusive statements were possible. Little systematic variation in building leakage with construction type, building activity type, height, size, or location within the u.s. was observed. Commercial buildings and apartments seem to be about twice as leaky as single-family houses, per unit of building envelope area. Although further work collecting and analyzing leakage data might be useful, we suggest that a more important issue may be the transport of pollutants between units in apartments and mixed-use buildings, an under-studied phenomenon that may expose occupants to high levels of pollutants such as tobacco smoke or dry cleaning fumes.

Thermal comfort in residential buildings: Comfort values and scales for building energy simulation

Energy Technology Data Exchange (ETDEWEB)

Peeters, Leen; D' haeseleer, William [Division of Applied Mechanics and Energy Conversion, University of Leuven (K.U.Leuven), Celestijnenlaan 300 A, B-3001 Leuven (Belgium); Dear, Richard de [Division of Environmental and Life Sciences, Macquarie University, Sydney (Australia); Hensen, Jan [Faculty of Architecture, Building and Planning, Technische Universiteit Eindhoven, Vertigo 6.18, P.O. Box 513, 5600 MB Eindhoven (Netherlands)

2009-05-15

Building Energy Simulation (BES) programmes often use conventional thermal comfort theories to make decisions, whilst recent research in the field of thermal comfort clearly shows that important effects are not incorporated. The conventional theories of thermal comfort were set up based on steady state laboratory experiments. This, however, is not representing the real situation in buildings, especially not when focusing on residential buildings. Therefore, in present analysis, recent reviews and adaptations are considered to extract acceptable temperature ranges and comfort scales. They will be defined in an algorithm, easily implementable in any BES code. The focus is on comfortable temperature levels in the room, more than on the detailed temperature distribution within that room. (author)

The Design of Finite State Machine for Asynchronous Replication Protocol

Science.gov (United States)

Wang, Yanlong; Li, Zhanhuai; Lin, Wei; Hei, Minglei; Hao, Jianhua

Data replication is a key way to design a disaster tolerance system and to achieve reliability and availability. It is difficult for a replication protocol to deal with the diverse and complex environment. This means that data is less well replicated than it ought to be. To reduce data loss and to optimize replication protocols, we (1) present a finite state machine, (2) run it to manage an asynchronous replication protocol and (3) report a simple evaluation of the asynchronous replication protocol based on our state machine. It's proved that our state machine is applicable to guarantee the asynchronous replication protocol running in the proper state to the largest extent in the event of various possible events. It also can helpful to build up replication-based disaster tolerance systems to ensure the business continuity.

Community helping services: dynamic of formation and expressiveness of the cultural care.

Science.gov (United States)

Landim, Fátima Luna Pinheiro

2006-01-01

Community helping services is an expression used by the social movements to designate families that live in shacks installed in a public area intended for building of own house at a community helping system. Studies in ethnonursing that aimed: in order to detail dynamic configuration in a community helping service. It took place in an community helping area located in the outskirts of Fortaleza, Ceará. The community members acting as general informants from the local culture, while eight (8) women heads-of-families, working as key informers. The data collect used the Observation-Participation-Reflection Model. The analyses were processing by the time that the dates were collected, considering the categories: inserting in the community helping culture to obtain their history; community helping is not a slum -describing the formation dynamic. Established that the formation dynamic of the community helping go on the own house representation as a symbol of " a better life". To assimilate such expression introducing in own cultural universe is a challenge for the nursing to assist a care culture congruent.

Mathematical modeling of stress-strain state of the system HPP building - soil base with account for the phased construction of the building

Directory of Open Access Journals (Sweden)

Orekhov Vyacheslav Valentinovich

Full Text Available The interaction process of a power plant building with the soil base is studied basing on mathematical modeling of the construction process of Kambarata-2 HPP, taking into account the excavation of foundation pit, the concreting schedule of the building construction, the HPP units putting into operation and territory planning. Mathematical modeling of stress-strain state of the system “power plant - soil base” in the process of construction was performed by using the computer program “Zemlya” (the Earth, which implements the method of finite elements. Such a behavior of soil was described using elastoplastic soil model, the parameters of which were determined from the results of the triaxial tests. As shown by the results of the research, the continuous change of settlement, slope, deflection and torsion of the bottom plate and accordingly change of stressed-strained state of power plant are noted during the construction process. The installed HPP construction schedule, starting from the construction of the first block and the adjacent mounting platform, is leading to the formation of initial roll of bottom plate to the path of the mounting pad. In the process of further construction of powerhouse, up to the 29th phase of construction (out of 40, a steady increase in its subsidence (maximum values of about 4.5 cm is noted. Filling of foundation pit hollows and territorial planning of the construction area lead to drastic situation. In this case, as a territory planning points exceeded the relief, the plastic deformation in the soil evolves, resulting in significant subsidence of the bottom plate under the first block (up to 7.4 cm. As a result, the additional subsidence of the soil of bottom plate edges lead to the large vertical movement in relation to its central part and it is bent around the X axis, resulting in a large horizontal tensile stress values of Sz (up to 2.17 MPa in the constructive elements of the upper part of the

Object-Oriented Database for Managing Building Modeling Components and Metadata: Preprint

Energy Technology Data Exchange (ETDEWEB)

Long, N.; Fleming, K.; Brackney, L.

2011-12-01

Building simulation enables users to explore and evaluate multiple building designs. When tools for optimization, parametrics, and uncertainty analysis are combined with analysis engines, the sheer number of discrete simulation datasets makes it difficult to keep track of the inputs. The integrity of the input data is critical to designers, engineers, and researchers for code compliance, validation, and building commissioning long after the simulations are finished. This paper discusses an application that stores inputs needed for building energy modeling in a searchable, indexable, flexible, and scalable database to help address the problem of managing simulation input data.

Intelligent building operating technologies : a cost-effective reduction in building energy consumption[Business case for a climate change solution]. 2. ed.

Energy Technology Data Exchange (ETDEWEB)

Gilles, J.

2004-04-01

Much of the energy consumed in the commercial and institutional (C and I) buildings sector is wasted due to poor building operation. The sector accounts for 13 per cent of secondary energy use in Canada, and contributes about the same proportion of greenhouse gas (GHG) emissions. Energy use in this sector could be reduced if the operation of the buildings were improved. The CANMET Energy Technology Centre in Varennes, Quebec has developed a set of software solutions called Intelligent Building Operating Technologies to address this problem. The software program applies artificial intelligence algorithms to existing building energy management control systems to diagnose equipment and system problems. The software provides performance reports and allows the operator to optimize the operation of the building. The proposed control strategies could be applied to 60 per cent of the building surface area in Canada, resulting energy consumption reductions of 12 per cent annually, or 14 TWh of electricity and 1.5 billion cubic metres of natural gas. The savings amount to $1.8 billion and 7 Mt of GHG emissions annually. It was suggested that a national retro-commissioning program would eliminate the barriers to improving building operation and help research and development aimed at Intelligent Building Operating Technologies. 8 refs., 5 tabs., 3 figs.

76 FR 27843 - National Building Safety Month, 2011

Science.gov (United States)

2011-05-13

... organizations and the public and private sectors--to implement effective standards and codes that sustain safe... and fire prevention codes help us withstand, mitigate, and rapidly recover from hurricanes, winter... Building Safety Month. I encourage citizens, government agencies, private businesses, nonprofit...

Simulation for (sustainable) building design: Czech experiences

NARCIS (Netherlands)

Bartak, M.; Drkal, F.; Hensen, J.L.M.; Lain, M.; Schwarzer, J.; Sourek, B.

2001-01-01

This paper attempts to outline the current state-of-the-art in the Czech Republic regarding the use of integrated building performance simulation as a design tool. Integrated performance simulation for reducing the environmental impact of buildings is illustrated by means of three recent HVAC

CERN building numbers: no rhyme and little reason

CERN Multimedia

Katarina Anthony

2012-01-01

Over the years, people at CERN have been trying to develop a single theory to explain CERN’s building numbers. Behind these seemingly random numbers there must surely be an ultimate solution: CERN’s second Standard Model, if you will. The CERN Bulletin finds out more…   Still trying to understand CERN's building numbers? Give up... There’s no denying it: the CERN site cannot be navigated without professional help. You can walk down a single corridor and pass through Buildings 33, 4, 5 and 53… in that order. Surely there must be a method behind this madness? “Well, if there is one, we’ve yet to find it,” says Youri Robert, who is in charge of geographic information and patrimony data in the GS Department’s Site Engineering group, which is responsible for the classification of CERN’s buildings. “We do have some naming conventions in place, especially for buildings related to...

Lighting energy efficiency in office buildings: Sri Lanka

International Nuclear Information System (INIS)

Wijayatunga, Priyantha D.C.; Fernando, W.J.L.S.; Ranasinghe, S.

2003-01-01

This paper describes a study conducted in the lighting sector of office buildings as a part of a broader research study aimed at developing building codes for Sri Lanka addressing lighting as well as thermal comfort in order to optimise the use of electricity within these buildings. The study covered different tasks performed in office buildings and the optimum lighting levels required to perform these tasks in the office environment in Sri Lanka. Also, it included assessing the visual performance of people involved in different activities under varying illumination levels in a controlled environment and a comparison of these optimum lighting levels with international standards. It can be seen that the required optimum lighting levels are generally lower in Sri Lanka in comparison to specified standard levels, and this scenario is likely to be similar in other developing countries too. These findings clearly emphasise the need to adopt lighting standards most appropriate to local conditions, in turn helping improve the energy efficiency within buildings

Dance Movement as a Way to Help Children Affected by War

Science.gov (United States)

Levy, Fran J.; Ranjbar, Azita; Dean, Colleen Hearn

2006-01-01

In the midst of the violence of the 21st century, many children fear that they or someone they know will lose a relative or friend through terrorism. Professionals in dance movement therapy, dance education, and physical education can help children to overcome their fears in order to feel safe and to build self-esteem. This article examines how…

Lighting technology specifications for relighting federal buildings

International Nuclear Information System (INIS)

Harris, L.; Purcell, C.W.; Gordon, H.; McKay, H.

1993-01-01

The Department of Energy's Federal Relighting Initiative, under the Federal Energy Management Program (FEMP), now offers a comprehensive process to assist agencies in meeting the DOE energy mandate that states that Federal facilities shall use 20% less energy by the year 2000, based on 1985 consumption, and shall improve lighting to increase productivity with relighting projects. The process provides a systematic approach in the screening, selection, design, implementation and evaluation of relighting projects. The Master Specifications help assure the acquisition of high-quality, life-cycle cost-effective lighting systems. The process begins with the screening of the agency's building stock to identify the most promising relighting candidates and concludes with implementation support and system performance assessment. The tools developed by FRI are designed to assist agencies during each phase of the relighting process. The tools are based upon the Federal life-cycle cost approach, thereby complying with 10 CFR, part 436, and the Federal life-cycle cost requirement

Helping Children Learn Vocabulary during Computer-Assisted Oral Reading

Directory of Open Access Journals (Sweden)

Gregory Aist

2002-04-01

Full Text Available This paper addresses an indispensable skill using a unique method to teach a critical component: helping children learn to read by using computer-assisted oral reading to help children learn vocabulary. We build on Project LISTEN’s Reading Tutor, a computer program that adapts automatic speech recognition to listen to children read aloud, and helps them learn to read (http://www.cs.cmu.edu/~listen. To learn a word from reading with the Reading Tutor, students must encounter the word and learn the meaning of the word in context. We modified the Reading Tutor first to help students encounter new words and then to help them learn the meanings of new words. We then compared the Reading Tutor to classroom instruction and to human-assisted oral reading as part of a yearlong study with 144 second and third graders. The result: Second graders did about the same on word comprehension in all three conditions. However, third graders who read with the 1999 Reading Tutor, modified as described in this paper, performed statistically significantly better than other third graders in a classroom control on word comprehension gains – and even comparably with other third graders who read one-on-one with human tutors.

Climate Responsive Buildings Concepts in Hong Kong

DEFF Research Database (Denmark)

Haase, M.; Amato, A.; van der Aa, A.

2006-01-01

There is a global need for a more sustainable building development. About 50% of energy is used in buildings indicating that buildings provide a considerable potential for operational energy savings. Studies were conducted with the following objectives: to perform a state-of-the-art review...... energy saving installations are increasingly applied as heat pumps in combination with energy storage, balanced ventilation with heat recovery, cooling towers etc. In Hong Kong in most cases there is no integrated design process for building projects. This means that projects are developed and designed...

Theoretical radiative properties between states of the triplet manifold of NH radical

International Nuclear Information System (INIS)

Owono Owono, L.C.; Jaidane, N.; Ben Lakhdar, Z.

2007-12-01

Ab initio transition dipole moments between states of the triplet manifold of NH radical are presented. This enables the computation of various radiative characteristics such as Einstein coefficients, radiative lifetimes and oscillator strengths. These properties concern valence and Rydberg states as well for which spectroscopic parameters are rather scarce and sometimes inexistent. Our results show good agreement with available experimental data in comparison to other theoretical numbers reported in the literature. This helps to build confidence on the quantities for which data were not found for comparative purposes. It is expected that the present study may enhance further astrophysical and laboratory investigations. (author)

Member State approach towards a strategy for passive/very low-energy buildings

DEFF Research Database (Denmark)

Dyrbøl, Susanne; Thomsen, Kirsten Engelund; Wittchen, Kim Bjarne

2008-01-01

One of the prescribed actions on buildings in the EU Action Plan on Energy Efficiency [COM(2006)545] is for the Commission to develop a strategy for very low-energy or passive houses (before 2009) towards a more widespread deployment of these building types by 2015. In order to generate a picture...... of the current national approach in this area EuroACE has initiated a survey. The scope was to create an overview of current and planned strategies in the European countries regarding the implementation of requirements towards very low-energy buildings (on passive level or similar) in their national legislation...

Science as a Common Language in a Globalised World - Scientific Collaboration Promoting Progress, Building Bridges

CERN Multimedia

CERN. Geneva. Audiovisual Unit

2003-01-01

International scientific collaboration and co-operation can accelerate the progress of science, help build bridges between diverse societies, and foster the development of science and technology in non-industrialised countries. This is possible because science is a common language (although the progress of science is often influenced by non-scientific factors). I shall describe examples of the role that scientific collaboration can play in bridge building and in conflict resolution. I shall then present a proposal for "Bridge Building Fellowships" which would contribute to strengthening scientific capacity in developing countries by helping to stem the brain drain and providing a basis for collaborations with scientists in industrialised countries.

School Public Relations: Helping an American Institution Pass Its Most Crucial Test

Science.gov (United States)

Boyd, Ellen

2004-01-01

The professional discipline of strategic public relations offers many benefits to organizations. It helps them prevent and mitigate crises. It allows them to identify and manage issues that may interfere with their goals and objectives. It also leads them in building and maintaining quality relationships with strategic publics. However, can the…

Energy efficiency of residential buildings. Energy consumption and investment costs of different building energy standards; Energieeffizienz von Wohngebaeuden. Energieverbraeuche und Investitionskosten energetischer Gebaeudestandards

Energy Technology Data Exchange (ETDEWEB)

Beecken, Christoph; Schulze, Stephan [Bow Ingenieure GmbH, Braunschweig (Germany)

2011-12-15

In view of the impending energy transition in Germany, turning away from fossil fuels and atomic power and leading to renewable energy sources, the construction of very energy efficient new buildings gains more and more in importance. Because the saving of energy with efficient buildings offers the highest potential to achieve the energy transition without loss of comfort and also complying with the climate protection target of limitation of the carbon dioxide emission. For new buildings in the initial project planning phase, the client needs qualified consulting concerning a reasonable energy standard for his building. The consulting should comprise the multitude of energy efficiency standards and the related financial incentives and not only cover the minimum standard of the German Building Energy Conservation Regulation EnEV (Energieeinsparverordnung). But the architect can hardly quantify the potentials to reduce energy consumption of buildings considering the multitude of existing standards with multifarious effects on energy consumption, technical requirements and building costs. With the help of an example multi-storey residential building in Hannover, current energy standards for residential buildings are compared. Besides the building construction also the building services like heating, hot water generation and ventilation are considered and the most important results concerning energy consumption and investment costs are compared.

Building electro-optical systems making it all work

CERN Document Server

Hobbs, Philip C D

2009-01-01

Praise for the First Edition ""Now a new laboratory bible for optics researchers has joined the list: it is Phil Hobbs's Building Electro-Optical Systems: Making It All Work.""-Tony Siegman, Optics & Photonics News Building a modern electro-optical instrument may be the most interdisciplinary job in all of engineering. Be it a DVD player or a laboratory one-off, it involves physics, electrical engineering, optical engineering, and computer science interacting in complex ways. This book will help all kinds of technical people sort through the complexit

Stigma in Help-Seeking: The Case of Adolescents

Science.gov (United States)

Shechtman, Zipora; Vogel, David L.; Strass, Haley A.; Heath, Patrick J.

2018-01-01

Stigma associated with seeking help has been found to be a key help-seeking barrier, however its role is less clear for: (a) adolescents, (b) groups outside the United States and (c) different types of therapy. This study addresses these omissions by examining the relationships between perceptions of public stigma of mental illness and the…

Algae façade as green building method: application of algae as a method to meet the green building regulation

Science.gov (United States)

Poerbo, Heru W.; Martokusumo, Widjaja; Donny Koerniawan, M.; Aulia Ardiani, Nissa; Krisanti, Susan

2017-12-01

The Local Government of Bandung city has stipulated a Green Building regulation through the Peraturan Walikota Number 1023/2016. Signed by the mayor in October 2016, Bandung became the first city in Indonesia that put green building as mandatory requirement in the building permit (IMB) process. Green Building regulation is intended to have more efficient consumption of energy and water, improved indoor air quality, management of liquid and solid waste etc. This objective is attained through various design method in building envelope, ventilation and air conditioning system, lighting, indoor transportation system, and electrical system. To minimize energy consumption of buildings that have large openings, sun shading device is often utilized together with low-E glass panes. For buildings in hot humid tropical climate, this method reduces indoor air temperature and thus requires less energy for air conditioning. Indoor air quality is often done by monitoring the carbon dioxide levels. Application of algae as part of building system façade has recently been introduced as replacement of large glass surface in the building façade. Algae are not yet included in the green building regulation because it is relatively new. The research will investigate, with the help of the modelling process and extensive literature, how effective is the implementation of algae in building façade to reduce energy consumption and improve its indoor air quality. This paper is written based on the design of ITB Innovation Park as an ongoing architectural design-based research how the algae-integrated building façade affects the energy consumption.

The Impact of Building Occupant Behavior on Energy Efficiency and Methods to Influence It: A Review of the State of the Art

Directory of Open Access Journals (Sweden)

Antonio Paone

2018-04-01

Full Text Available Buildings consume a significant amount of energy, estimated at about one-third of total primary energy resources. Building energy efficiency has turned out to be a major issue in limiting the increasing energy demands of the sector. Literature shows that building user behavior can increase the efficiency of the energy used in the building and different strategies have been tested to address and support this issue. These strategies often combine the quantification of energy savings and qualitative interpretation of occupant behavior in order to foster energy efficiency. Strategies that influence building occupant behaviors include eco-feedback, social interaction, and gamification. This review paper presents a study conducted on the state of the art related to the impact of building user behavior on energy efficiency, in order to provide the research community with a better understanding and up-to-date knowledge of energy, comfort-related practices, and potential research opportunities. Achieving and maintaining energy-efficient behavior without decreasing the comfort of building occupants still represents a challenge, despite emerging technologies and strategies as well as general research progress made over the last decade. Conclusions highlight eco-feedback as an effective way to influence behavior, and gamification as a new opportunity to trigger behavioral change. The impact of user behavior is difficult to quantify for methodological reasons. Factors influencing human behavior are numerous and varied. Multi-disciplinary approaches are needed to provide new insights into the inner dynamic nature of occupant’s energy behavior.

High Performance Home Building Guide for Habitat for Humanity Affiliates

Energy Technology Data Exchange (ETDEWEB)

Lindsey Marburger

2010-10-01

This guide covers basic principles of high performance Habitat construction, steps to achieving high performance Habitat construction, resources to help improve building practices, materials, etc., and affiliate profiles and recommendations.

Integrating Renewable Energy Requirements Into Building Energy Codes

Energy Technology Data Exchange (ETDEWEB)

Kaufmann, John R.; Hand, James R.; Halverson, Mark A.

2011-07-01

This report evaluates how and when to best integrate renewable energy requirements into building energy codes. The basic goals were to: (1) provide a rough guide of where we’re going and how to get there; (2) identify key issues that need to be considered, including a discussion of various options with pros and cons, to help inform code deliberations; and (3) to help foster alignment among energy code-development organizations. The authors researched current approaches nationally and internationally, conducted a survey of key stakeholders to solicit input on various approaches, and evaluated the key issues related to integration of renewable energy requirements and various options to address those issues. The report concludes with recommendations and a plan to engage stakeholders. This report does not evaluate whether the use of renewable energy should be required on buildings; that question involves a political decision that is beyond the scope of this report.

NASA Ames DEVELOP Interns: Helping the Western United States Manage Natural Resources One Project at a Time

Science.gov (United States)

Justice, Erin; Newcomer, Michelle

2010-01-01

The western half of the United States is made up of a number of diverse ecosystems ranging from arid desert to coastal wetlands and rugged forests. Every summer for the past 7 years students ranging from high school to graduate level gather at NASA Ames Research Center (ARC) as part of the DEVELOP Internship Program. Under the guidance of Jay Skiles [Ames Research Center (ARC) - Ames DEVELOP Manager] and Cindy Schmidt [ARC/San Jose State University Ames DEVELOP Coordinator] they work as a team on projects exploring topics including: invasive species, carbon flux, wetland restoration, air quality monitoring, storm visualizations, and forest fires. The study areas for these projects have been in Washington, Utah, Oregon, Nevada, Hawaii, Alaska and California. Interns combine data from NASA and partner satellites with models and in situ measurements to complete prototype projects demonstrating how NASA data and resources can help communities tackle their Earth Science related problems.

Environmental issues in planning building energy technologies R ampersand D in the United States

International Nuclear Information System (INIS)

Farhar, B.C.; Abel, F.H.; Nicholls, A.K.; Millhone, J.P.

1991-08-01

The US Department of Energy's Office of Building Technologies (OBT) has begun studies on the relationship and impact of buildings energy use on the environment, particularly with respect to global climate change, acid rain, stratospheric ozone depletion, and indoor air quality. The paper presents an overview of international and US federal activity in global change to set OBT's activities in context. The paper then reviews briefly the contribution of buildings to atmospheric problems through building energy use. OBT's program primarily supports projects with indirect environmental impacts through energy efficiency (e.g., thermally activated heat pumps use natural gas instead of electricity) and the use of renewables in buildings. The paper briefly describes the OBT program and covers an inventory of projects that OBT has funded on environmental/building problems. Analyses have included three kinds of topics: (1) CFC substitutes for refrigeration equipment, (2) incorporating the cost of externalities into utility electricity generation, and (3) indoor air quality. The paper shows how environmental issues are being taken into account in planning the US R ampersand D program in building energy technologies. 27 refs

Assessing thermal comfort and energy efficiency in buildings by statistical quality control for autocorrelated data

International Nuclear Information System (INIS)

Barbeito, Inés; Zaragoza, Sonia; Tarrío-Saavedra, Javier; Naya, Salvador

2017-01-01

Highlights: • Intelligent web platform development for energy efficiency management in buildings. • Controlling and supervising thermal comfort and energy consumption in buildings. • Statistical quality control procedure to deal with autocorrelated data. • Open source alternative using R software. - Abstract: In this paper, a case study of performing a reliable statistical procedure to evaluate the quality of HVAC systems in buildings using data retrieved from an ad hoc big data web energy platform is presented. The proposed methodology based on statistical quality control (SQC) is used to analyze the real state of thermal comfort and energy efficiency of the offices of the company FRIDAMA (Spain) in a reliable way. Non-conformities or alarms, and the actual assignable causes of these out of control states are detected. The capability to meet specification requirements is also analyzed. Tools and packages implemented in the open-source R software are employed to apply the different procedures. First, this study proposes to fit ARIMA time series models to CTQ variables. Then, the application of Shewhart and EWMA control charts to the time series residuals is proposed to control and monitor thermal comfort and energy consumption in buildings. Once thermal comfort and consumption variability are estimated, the implementation of capability indexes for autocorrelated variables is proposed to calculate the degree to which standards specifications are met. According with case study results, the proposed methodology has detected real anomalies in HVAC installation, helping to detect assignable causes and to make appropriate decisions. One of the goals is to perform and describe step by step this statistical procedure in order to be replicated by practitioners in a better way.

Re-Assessing Green Building Performance: A Post Occupancy Evaluation of 22 GSA Buildings

Energy Technology Data Exchange (ETDEWEB)

Fowler, Kimberly M.; Rauch, Emily M.; Henderson, Jordan W.; Kora, Angela R.

2010-06-01

2nd report on the performance of GSA's sustainably designed buildings. The purpose of this study was to provide an overview of measured whole building performance as it compares to GSA and industry baselines. The PNNL research team found the data analysis illuminated strengths and weaknesses of individual buildings as well as the portfolio of buildings. This section includes summary data, observations that cross multiple performance metrics, discussion of lessons learned from this research, and opportunities for future research. The summary of annual data for each of the performance metrics is provided in Table 25. The data represent 1 year of measurements and are not associated with any specific design features or strategies. Where available, multiple years of data were examined and there were minimal significant differences between the years. Individually focused post occupancy evaluation (POEs) would allow for more detailed analysis of the buildings. Examining building performance over multiple years could potentially offer a useful diagnostic tool for identifying building operations that are in need of operational changes. Investigating what the connection is between the building performance and the design intent would offer potential design guidance and possible insight into building operation strategies. The 'aggregate operating cost' metric used in this study represents the costs that were available for developing a comparative industry baseline for office buildings. The costs include water utilities, energy utilities, general maintenance, grounds maintenance, waste and recycling, and janitorial costs. Three of the buildings that cost more than the baseline in Figure 45 have higher maintenance costs than the baseline, and one has higher energy costs. Given the volume of data collected and analyzed for this study, the inevitable request is for a simple answer with respect to sustainably designed building performance. As previously stated

Indiana University receives grant from National Science Foundation to help build global grid network

CERN Multimedia

2001-01-01

The NSF awarded a consortium of 15 universities $13.65 million to build the International Virtual Data Grid Laboratory, or iVDGL. The iVDGL will consist of a seamless network of thousands of computers at 40 locations in the US, Europe and Asia. These computers will work together as a powerful grid capable of handling petabytes of data. Indiana University will make significant contributions to this project by providing a prototype Tier-2 Data Center for the ATLAS high energy physics experiment and the International Grid Operations Center.

THE EFFECT OF BUILDING FAÇADE MODEL ON LIGHT DISTRIBUTION (CASE STUDY: MENARA PHINISI BUILDING OF UNM

Directory of Open Access Journals (Sweden)

Nurul Jamala

2017-12-01

Full Text Available Global warming issues influence the temperature of the earth surface. It is an impact on energy consumption, especially in buildings. Utilization of daylight is one of the factors that need to be considered, in order to minimize energy consumption as a source of artificial lighting. This study analyzed the distribution of light on the Menara Phinisi building of Makassar State University. Quantitative research method that is to describe the data of simulation in Autodesk Ecotect program. The research objective was to determine the effect of the building facade model on the value of illumination inside the building. Results of the study concluded that the decrease percentage of the distribution of light on the building facade using and not using the facade is 3,16% or 236 lux. Distribution of light in horizontal and diagonal facade models differ in the amount of 2,5%. Design analysis of the building serves as a guide for analyzing the influence of the building facade model so that it can create energy efficient buildings.

Challenges for energy efficiency in the buildings sector in the Sao Paulo State, Brazil; Desafios para eficiencia energetica no setor de edificios no estado de Sao Paulo

Energy Technology Data Exchange (ETDEWEB)

Matos, Maria Ines; Parente, Virginia [Universidade de Sao Paulo (IEE/USP), SP (Brazil). Inst. de Eletrotecnica e Energia

2010-07-01

The consumption of energy in the building sector accounts for more than one third of the total final electricity consumption in Sao Paulo State. Considering that, the development of policy measures aiming at the promotion of energy efficiency in the sector should be encouraged. Analysed data reveals the continuing rise of energy consumption resulting form the high number of new buildings and the rising standards of the population in consequence of economic development. Besides this, the retrofit of old buildings presents a huge potential for energy savings. The article analyses and suggests the use of Building Codes as a suitable policy instrument for the Sao Paulo Sate reality. (author)

A CMMS Expert using BIM for IBS Building Maintenance

Directory of Open Access Journals (Sweden)

Hamzah Noraini

2016-01-01

Full Text Available In the IBS building maintenance, the conventional methods to the project delivery and its failure to form effective communication channel between complementary knowledge on IBS construction and related members that is conducted in the sequential manner has resulted in ineffectiveness for managing building maintenance, where a paradigm shift within the IBS traditional approach is necessary. The research results described are concerned with i an integrated system to record, diagnose and analyse information for IBS building maintenance to detect patent or latent defect, select an effective repair method, provide appropriate planning decision and reduce risks of defect throughout the building lifetime. ii building a decision making support in diagnosis in IBS building maintenance based on robust data collection about concrete defects and causes including in the selection of a durable replacement design and material or the proper rehabilitation method. The system development was based on analysis of number of interviews and case studies conducted with professional engineers working in IBS building maintenance departments. The paper concludes that implementing a CMMS Expert using BIM can help improve the performance of IBS building design, construction and maintenance operations.

Code Compliant School Buildings Boost Student Achievement

Directory of Open Access Journals (Sweden)

Ronald B. Lumpkin

2014-11-01

Full Text Available Much of the focus in the literature in raising student achievement has included parental involvement, principal leadership, quality of instruction, students’ socioeconomic status, curriculum, and use of technology. Limited empirical research relates the condition of the school building as a variable that affects student achievement. Furthermore, there is no research that has examined the impact of building codes on achievement outcomes in the state of Florida. This research determined whether academic achievement of 4th-, 8th-, 9th-, and 10th-grade students as measured by the mathematics and reading subtests of the Florida Comprehensive Achievement Test (FCAT increased in new school buildings compliant to the 2000 Florida State Requirements for Educational Facilities. A causal-comparative design determined whether the independent variables, old and new school building influenced student achievement as measured by students’ FCAT mathematics and reading subtest scores. The control group was two cohorts of 4th-, 8th-, 9th-, and 10th-grade students who attended school in old buildings. The experimental group was two cohorts of 4th-, 8th-, 9th-, and 10th-grade students who attended school in new buildings. Transition from an old school into a new school was the treatment. Two hypotheses were formulated for testing and the research question for the inquiry was whether the percentage of students passing the FCAT mathematics and reading subtests increases after transitioning from an old school building into a new 2000 UBC (Uniform Building Code compliant facility.

Intelligent demand side management of residential building energy systems

Science.gov (United States)

Sinha, Maruti N.

Advent of modern sensing technologies, data processing capabilities and rising cost of energy are driving the implementation of intelligent systems in buildings and houses which constitute 41% of total energy consumption. The primary motivation has been to provide a framework for demand-side management and to improve overall reliability. The entire formulation is to be implemented on NILM (Non-Intrusive Load Monitoring System), a smart meter. This is going to play a vital role in the future of demand side management. Utilities have started deploying smart meters throughout the world which will essentially help to establish communication between utility and consumers. This research is focused on investigation of a suitable thermal model of residential house, building up control system and developing diagnostic and energy usage forecast tool. The present work has considered measurement based approach to pursue. Identification of building thermal parameters is the very first step towards developing performance measurement and controls. The proposed identification technique is PEM (Prediction Error Method) based, discrete state-space model. The two different models have been devised. First model is focused toward energy usage forecast and diagnostics. Here one of the novel idea has been investigated which takes integral of thermal capacity to identify thermal model of house. The purpose of second identification is to build up a model for control strategy. The controller should be able to take into account the weather forecast information, deal with the operating point constraints and at the same time minimize the energy consumption. To design an optimal controller, MPC (Model Predictive Control) scheme has been implemented instead of present thermostatic/hysteretic control. This is a receding horizon approach. Capability of the proposed schemes has also been investigated.

Training program for energy conservation in new-building construction. Volume II. Energy conservation technology: for the building inspector

Energy Technology Data Exchange (ETDEWEB)

None

1977-12-01

A Model Code for Energy Conservation in New Building Construction has been developed by those national organizations primarily concerned with the development and promulgation of model codes. The technical provisions are based on ASHRAE Standard 90-75 and are intended for use by state and local officials. This training manual contains the basic information necessary to acquaint the field building inspector with the concepts of energy conservation in buildings and instructs him in the basic techniques of field inspection of energy compliance.

Industry Research and Recommendations for New Commercial Buildings

Energy Technology Data Exchange (ETDEWEB)

Hendron, B.; Leach, M.; Gregory, N.; Pless, S.; Selkowitz, S.; Matthew, P.

2014-05-01

Researchers evaluated industry needs and developed logic models to support possible future commercial new construction research and deployment efforts that could be led or supported by DOE's Commercial Building Integration program or other national initiatives. The authors believe that these recommendations support a proposed course of action from the current state of commercial building energy efficiency to a possible long-term goal of achieving significant market penetration of cost-effective NZE buildings in all building sectors and climates by 2030.

Building virtual pentesting labs for advanced penetration testing

CERN Document Server

Cardwell, Kevin

2014-01-01

Written in an easy-to-follow approach using hands-on examples, this book helps you create virtual environments for advanced penetration testing, enabling you to build a multi-layered architecture to include firewalls, IDS/IPS, web application firewalls, and endpoint protection, which is essential in the penetration testing world. If you are a penetration tester, security consultant, security test engineer, or analyst who wants to practice and perfect penetration testing skills by building virtual pen testing labs in varying industry scenarios, this is the book for you. This book is ideal if yo

US-China Clean Energy Research Center on Building Energy Efficiency: Materials that Improve the Cost-Effectiveness of Air Barrier Systems

Energy Technology Data Exchange (ETDEWEB)

Hun, Diana E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2016-12-01

The US–China Clean Energy Research Center (CERC) was launched in 2009 by US Energy Secretary Steven Chu, Chinese Minister of Science and Technology Wan Gang, and Chinese National Energy Agency Administrator Zhang Guobao. This 5-year collaboration emerged from the fact that the United States and China are the world’s largest energy producers, energy consumers, and greenhouse gas emitters, and that their joint effort could have significant positive repercussions worldwide. CERC’s main goal is to develop and deploy clean energy technologies that will help both countries meet energy and climate challenges. Three consortia were established to address the most pressing energy-related research areas: Advanced Coal Technology, Clean Vehicles, and Building Energy Efficiency (BEE). The project discussed in this report was part of the CERC-BEE consortia; its objective was to lower energy use in buildings by developing and evaluating technologies that improve the cost-effectiveness of air barrier systems for building envelopes.

Building of Requirement: Liberating Academic Interior Architecture

Science.gov (United States)

McLane, Yelena; Dawkins, Jim

2014-01-01

The authors focus on the strategies employed in the recent renovation of the William Johnston Building at Florida State University, in which the historical exterior was preserved, while the interiors were adapted to new functions as classrooms, study centers, and common spaces with intentionally undefined purposes. The building's various use…

The impact of state energy programs and other contextual factors on U.S. buildings energy consumption

Science.gov (United States)

Ofori-Boadu, Andrea N. Y. A.

High energy consumption in the United States has been influenced by populations, climates, income and other contextual factors. In the past decades, U.S. energy policies have pursued energy efficiency as a national strategy for reducing U.S. environmental degradation and dependence on foreign oils. The quest for improved energy efficiency has led to the development of energy efficient technologies and programs. The implementation of energy programs in the complex U.S. socio-technical environment is believed to promote the diffusion of energy efficiency technologies. However, opponents doubt the fact that these programs have the capacity to significantly reduce U.S. energy consumption. In order to contribute to the ongoing discussion, this quantitative study investigated the relationships existing among electricity consumption/ intensity, energy programs and contextual factors in the U.S. buildings sector. Specifically, this study sought to identify the significant predictors of electricity consumption and intensity, as well as estimate the overall impact of selected energy programs on electricity consumption and intensity. Using state-level secondary data for 51 U.S. states from 2006 to 2009, seven random effects panel data regression models confirmed the existence of significant relationships among some energy programs, contextual factors, and electricity consumption/intensity. The most significant predictors of improved electricity efficiency included the price of electricity, public benefits funds program, building energy codes program, financial and informational incentives program and the Leadership in Energy and Environmental Design (LEED) program. Consistently, the Southern region of the U.S. was associated with high electricity consumption and intensity; while the U.S. commercial sector was the greater benefactor from energy programs. On the average, energy programs were responsible for approximately 7% of the variation observed in electricity consumption

Strengthening Building Retrofit Markets

Energy Technology Data Exchange (ETDEWEB)

Templeton, Mary [Michigan Saves; Jackson, Robert [Michigan Energy Office

2014-04-15

The Business Energy Financing (BEF) program offered commercial businesses in Michigan affordable financing options and other incentives designed to support energy efficiency improvements. We worked through partnerships with Michigan utilities, lenders, building contractors, trade associations, and other community organizations to offer competitive interest rates and flexible financing terms to support energy efficiency projects that otherwise would not have happened. The BEF program targeted the retail food market, including restaurants, grocery stores, convenience stores, and wholesale food vendors, with the goal of achieving energy efficiency retrofits for 2 percent of the target market. We offered low interest rates, flexible payments, easy applications and approval processes, and access to other incentives and rebates. Through these efforts, we sought to help customers strive for energy savings retrofits that would save 20 percent or more on their energy use. This program helped Michigan businesses reduce costs by financing energy efficient lighting, heating and cooling systems, insulation, refrigeration, equipment upgrades, and more. Businesses completed the upgrades with the help of our authorized contractors, and, through our lending partners, we provided affordable financing options.

Honor among Thieves: Horse Stealing, State-Building, and Culture in Lincoln County, Nebraska, 1860 - 1890

OpenAIRE

Luckett, Matthew S

2014-01-01

This dissertation explores the social, cultural, and economic history of horse stealing among both American Indians and Euro Americans in Lincoln County, Nebraska from 1860 to 1890. It shows how American Indians and Euro-Americans stole from one another during the Plains Indian Wars and explains how a culture of theft prevailed throughout the region until the late-1870s. But as homesteaders flooded into Lincoln County during the 1870s and 1880s, they demanded that the state help protect their...

Buildings for the 21st Century, Fall 2001

Energy Technology Data Exchange (ETDEWEB)

2001-10-01

The Buildings for the 21st Century newsletter is produced by the Office of Building Technology, State and Community Programs and contains information on building programs, events, products, and initiatives, with a focus on energy efficiency and renewable energy. The fall issue includes information on weatherization, Boise's geothermal heating system, the BTS Core Databook, the Solar Decathlon, a Rebuild America partnership, the BigHorn Home Improvement Center, AIA's Top Ten Buildings, a sub-CFL procurement program, the U.S. investment in energy efficient research, new efficiency standards, PNNL's building software, and a calendar of meetings and conferences.

Narrative Approaches to Organizational Development: A Case Study of Implementation of Collaborative Helping.

Science.gov (United States)

Madsen, William C

2016-06-01

Across North America, community agencies and state/provincial jurisdictions are embracing family-centered approaches to service delivery that are grounded in strength-based, culturally responsive, accountable partnerships with families. This article details a collaborative consultation process to initiate and sustain organizational change toward this effort. It draws on innovative ideas from narrative theory, organizational development, and implementation science to highlight a three component approach. This approach includes the use of appreciative inquiry focus groups to elicit existing best practices, the provision of clinical training, and ongoing coaching with practice leaders to build on those better moments and develop concrete practice frameworks, and leadership coaching and organizational consultation to develop organizational structures that institutionalize family-centered practice. While the article uses a principle-based practice framework, Collaborative Helping, to illustrate this process, the approach is applicable with a variety of clinical frameworks grounded in family-centered values and principles. © 2016 Family Process Institute.

Building Savings and Investments Culture among Nigerians

African Journals Online (AJOL)

DR Nneka

Rivers State University of Science and Technology, Port Harcourt. Rivers State, Nigeria. & .... assets, such as expensive cars, landed property, building etc. (3) For speculatory ... develop an automatic way of doing this. May be, mandating your ...

Role of Solvent, pH, and Molecular Size in Excited-State Deactivation of Key Eumelanin Building Blocks: Implications for Melanin Pigment Photostability

DEFF Research Database (Denmark)

Gauden, M.; Pezzella, A.; Panzella, L.

2008-01-01

  Ultrafast time-resolved fluorescence spectroscopy has been used to investigate the excited state dynamics of the basic eumelanin building block 5,6-dihydroxyindole-2-carboxylic acid  (DHICA) its acetylated, methylated and carboxylic ester derivatives as well as two oligomers, a dimer and a trim...

Building policy leadership among HIV/AIDS health workers | IDRC ...

International Development Research Centre (IDRC) Digital Library (Canada)

2016-04-21

Apr 21, 2016 ... Health workers need research, leadership, and policy skills to help ... the regions hardest hit by the pandemic, by building these skills among ... Nowhere in the world has AIDS had a more devastating effect than in Africa.

Entanglement in Gaussian matrix-product states

International Nuclear Information System (INIS)

Adesso, Gerardo; Ericsson, Marie

2006-01-01

Gaussian matrix-product states are obtained as the outputs of projection operations from an ancillary space of M infinitely entangled bonds connecting neighboring sites, applied at each of N sites of a harmonic chain. Replacing the projections by associated Gaussian states, the building blocks, we show that the entanglement range in translationally invariant Gaussian matrix-product states depends on how entangled the building blocks are. In particular, infinite entanglement in the building blocks produces fully symmetric Gaussian states with maximum entanglement range. From their peculiar properties of entanglement sharing, a basic difference with spin chains is revealed: Gaussian matrix-product states can possess unlimited, long-range entanglement even with minimum number of ancillary bonds (M=1). Finally we discuss how these states can be experimentally engineered from N copies of a three-mode building block and N two-mode finitely squeezed states

A profile of wood use in nonresidential building construction

Science.gov (United States)

H. N. Spelter; R. G. Anderson

This report presents estimates of the amounts of lumber, glued-laminated lumber, trusses, plywood, particleboard, hardboard, and wood shingles used in new nonresidential building construction in the United States. Use of wood products is shown for several building types, project sizes, and building components. The estimates are based on a survey of 489 projects under...

Earthquake risk assessment of building structures

International Nuclear Information System (INIS)

Ellingwood, Bruce R.

2001-01-01

During the past two decades, probabilistic risk analysis tools have been applied to assess the performance of new and existing building structural systems. Structural design and evaluation of buildings and other facilities with regard to their ability to withstand the effects of earthquakes requires special considerations that are not normally a part of such evaluations for other occupancy, service and environmental loads. This paper reviews some of these special considerations, specifically as they pertain to probability-based codified design and reliability-based condition assessment of existing buildings. Difficulties experienced in implementing probability-based limit states design criteria for earthquake are summarized. Comparisons of predicted and observed building damage highlight the limitations of using current deterministic approaches for post-earthquake building condition assessment. The importance of inherent randomness and modeling uncertainty in forecasting building performance is examined through a building fragility assessment of a steel frame with welded connections that was damaged during the Northridge Earthquake of 1994. The prospects for future improvements in earthquake-resistant design procedures based on a more rational probability-based treatment of uncertainty are examined

Help-Seeking on Facebook Versus More Traditional Sources of Help: Cross-Sectional Survey of Military Veterans.

Science.gov (United States)

Teo, Alan R; Marsh, Heather E; Liebow, Samuel B L; Chen, Jason I; Forsberg, Christopher W; Nicolaidis, Christina; Saha, Somnath; Dobscha, Steven K

2018-02-26

The media has devoted significant attention to anecdotes of individuals who post messages on Facebook prior to suicide. However, it is unclear to what extent social media is perceived as a source of help or how it compares to other sources of potential support for mental health problems. This study aimed to evaluate the degree to which military veterans with depression use social media for help-seeking in comparison to other more traditional sources of help. Cross-sectional self-report survey of 270 adult military veterans with probable major depression. Help-seeking intentions were measured with a modified General Help-Seeking Questionnaire. Facebook users and nonusers were compared via t tests, Chi-square, and mixed effects regression models. Associations between types of help-seeking were examined using mixed effects models. The majority of participants were users of social media, primarily Facebook (n=162). Mean overall help-seeking intentions were similar between Facebook users and nonusers, even after adjustment for potential confounders. Facebook users were very unlikely to turn to Facebook as a venue for support when experiencing either emotional problems or suicidal thoughts. Compared to help-seeking intentions for Facebook, help-seeking intentions for formal (eg, psychologists), informal (eg, friends), or phone helpline sources of support were significantly higher. Results did not substantially change when examining users of other social media, women, or younger adults. In its current form, the social media platform Facebook is not seen as a venue to seek help for emotional problems or suicidality among veterans with major depression in the United States. ©Alan R Teo, Heather E Marsh, Samuel B L Liebow, Jason I Chen, Christopher W Forsberg, Christina Nicolaidis, Somnath Saha, Steven K Dobscha. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 26.02.2018.

Building 107 for surface treatment

CERN Multimedia

Brice, Maximilien

2018-01-01

A brand new state-of-the-art building hosting laboratories for the surface treatment of vacuum equipment and workshops for the manufacturing and treatment of printed circuit boards was completed in 2017.

INGUSHETIA UNDER THE “WHITE” POWER: PECULIARITIES OF STATE BUILDING IN 1919 - EARLY 1920

Directory of Open Access Journals (Sweden)

Сергей Александрович Орешин

2015-12-01

Full Text Available The article is devoted to the state building on the territory of Ingushetia in 1919 - early 1920 in order to find out the essence of the national state policy of White Guards in the mountain regions of the North Caucasus.The article analyzes the relations of White Guard administration with representatives of the Ingush society, considers the reasons which induced general A.I. Denikin for the first time in the history of Russia to grant autonomy to Ingushetia, the essence of the Ingush autonomy which existed less than a year. The author examines the nature of the political regime functioning in Ingushetia during the described period, offers the explanation for the failures and crash of White Guard policy in this region. The carried-out analysis allows establishing that the heads of the “White” movement in the south of Russia sought to consider the interests of the mountain people, in particular, Ingush, providing them with broad internal self-government. However, inconsistency of the policy conducted by the Denikinets didn't allow creating a wide social base in the region that led to the crisis and falling of White Guard model of statehood in the region.

Wireless sensor network performance metrics for building applications

Energy Technology Data Exchange (ETDEWEB)

Jang, W.S. (Department of Civil Engineering Yeungnam University 214-1 Dae-Dong, Gyeongsan-Si Gyeongsangbuk-Do 712-749 South Korea); Healy, W.M. [Building and Fire Research Laboratory, 100 Bureau Drive, Gaithersburg, MD 20899-8632 (United States)

2010-06-15

Metrics are investigated to help assess the performance of wireless sensors in buildings. Wireless sensor networks present tremendous opportunities for energy savings and improvement in occupant comfort in buildings by making data about conditions and equipment more readily available. A key barrier to their adoption, however, is the uncertainty among users regarding the reliability of the wireless links through building construction. Tests were carried out that examined three performance metrics as a function of transmitter-receiver separation distance, transmitter power level, and obstruction type. These tests demonstrated, via the packet delivery rate, a clear transition from reliable to unreliable communications at different separation distances. While the packet delivery rate is difficult to measure in actual applications, the received signal strength indication correlated well with the drop in packet delivery rate in the relatively noise-free environment used in these tests. The concept of an equivalent distance was introduced to translate the range of reliability in open field operation to that seen in a typical building, thereby providing wireless system designers a rough estimate of the necessary spacing between sensor nodes in building applications. It is anticipated that the availability of straightforward metrics on the range of wireless sensors in buildings will enable more widespread sensing in buildings for improved control and fault detection. (author)

Helping Children Succeed after Divorce: Building a Community-based Program in a Rural County.

Science.gov (United States)

Johnson, Diane E.

2000-01-01

A court-mandated parent education course aimed at reducing effects of divorce on children was evaluated by 1,400 participants over 5 years. Most respondents highly recommended the course and said it helped them become aware of their children's point of view and how to prevent long-term emotional problems. (SK)

Solar Heating and Cooling of Buildings: Activities of the Private Sector of the Building Community and Its Perceived Needs Relative to Increased Activity.

Science.gov (United States)

National Academy of Sciences - National Research Council, Washington, DC. Committee on Solar Energy in the Heating and Cooling of Buildings.

This report is essentially a collection of information gathered from a broad cross-section of the building community that provides a description of the state of affairs existing mid-1974 through mid-1975 in the private sector of the building community with regard to solar heating and cooling of buildings. The report additionally contains…

Energy Code Compliance in a Detailed Commercial Building Sample: The Effects of Missing Data

Energy Technology Data Exchange (ETDEWEB)

Biyani, Rahul K.; Richman, Eric E.

2003-09-30

Most commercial buildings in the U.S. are required by State or local jurisdiction to meet energy standards. The enforcement of these standards is not well known and building practice without them on a national scale is also little understood. To provide an understanding of these issues, a database has been developed at PNNL that includes detailed energy related building characteristics of 162 commercial buildings from across the country. For this analysis, the COMcheck? compliance software (developed at PNNL) was used to assess compliance with energy codes among these buildings. Data from the database for each building provided the program input with percentage energy compliance to the ASHRAE/IESNA Standard 90.1-1999 energy as the output. During the data input process it was discovered that some essential data for showing compliance of the building envelope was missed and defaults had to be developed to provide complete compliance information. This need for defaults for some data inputs raised the question of what the effect on documenting compliance could be due to missing data. To help answer this question a data collection effort was completed to assess potential differences. Using the program Dodge View, as much of the missing envelope data as possible was collected from the building plans and the database input was again run through COMcheck?. The outputs of both compliance runs were compared to see if the missing data would have adversely affected the results. Both of these results provided a percentage compliance of each building in the envelope and lighting categories, showing by how large a percentage each building either met or fell short of the ASHRAE/IESNA Standard 90.1-1999 energy code. The results of the compliance runs showed that 57.7 % of the buildings met or exceeded envelope requirements with defaults and that 68 % met or exceeded envelope requirements with the actual data. Also, 53.6 % of the buildings met or surpassed the lighting requirements

Regression Tree-Based Methodology for Customizing Building Energy Benchmarks to Individual Commercial Buildings

Science.gov (United States)

Kaskhedikar, Apoorva Prakash

According to the U.S. Energy Information Administration, commercial buildings represent about 40% of the United State's energy consumption of which office buildings consume a major portion. Gauging the extent to which an individual building consumes energy in excess of its peers is the first step in initiating energy efficiency improvement. Energy Benchmarking offers initial building energy performance assessment without rigorous evaluation. Energy benchmarking tools based on the Commercial Buildings Energy Consumption Survey (CBECS) database are investigated in this thesis. This study proposes a new benchmarking methodology based on decision trees, where a relationship between the energy use intensities (EUI) and building parameters (continuous and categorical) is developed for different building types. This methodology was applied to medium office and school building types contained in the CBECS database. The Random Forest technique was used to find the most influential parameters that impact building energy use intensities. Subsequently, correlations which were significant were identified between EUIs and CBECS variables. Other than floor area, some of the important variables were number of workers, location, number of PCs and main cooling equipment. The coefficient of variation was used to evaluate the effectiveness of the new model. The customization technique proposed in this thesis was compared with another benchmarking model that is widely used by building owners and designers namely, the ENERGY STAR's Portfolio Manager. This tool relies on the standard Linear Regression methods which is only able to handle continuous variables. The model proposed uses data mining technique and was found to perform slightly better than the Portfolio Manager. The broader impacts of the new benchmarking methodology proposed is that it allows for identifying important categorical variables, and then incorporating them in a local, as against a global, model framework for EUI

Miscellaneous and Electronic Loads Energy Efficiency Opportunities for Commercial Buildings: A Collaborative Study by the United States and India

Energy Technology Data Exchange (ETDEWEB)

Ghatikar, Girish [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Cheung, Iris [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Lanzisera, Steven [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Wardell, Bob [Infosys Technologies Limited; Deshpande, Manoj [Infosys Technologies Limited; Ugarkar, Jayraj [Infosys Technologies Limited

2013-04-01

This report documents the technical evaluation of a collaborative research, development, and demonstration (RD&D) project that aims to address energy efficiency of Miscellaneous and Electronic Loads (MELs) (referred to as plug loads interchangeably in this report) using load monitoring and control devices. The goal s of this project are to identify and provide energy efficiency and building technologies to exemplary information technology (IT) office buildings, and to assist in transforming markets via technical assistance and engagement of Indian and U.S. stakeholders. This report describes the results of technology evaluation and United States – India collaboration between the Lawrence Berkeley National Laboratory (LBNL), Infosys Technologies Limited (India), and Smartenit, Inc. (U.S.) to address plug - load efficiency. The conclusions and recommendations focus on the larger benefits of such technologies and their impacts on both U.S. and Indian stakeholders.

Sustainable Renovation of Residential Buildings and the Landlord/Tenant Dilemma

DEFF Research Database (Denmark)

Ástmarsson, Björn; Jensen, Per Anker; Maslesa, Esmir

2013-01-01

solutions can help solve the landlord/tenant dilemma in relation to sustainable renovation of residential buildings, and how the general awareness of sustainable renovation can be increased. Particular focus is on whether tools like energy performance contracting and energy labeling can help solve......The landlord/tenant dilemma arises when the interests of landlords and tenants misalign and is one of the greatest barriers hindering the development of sustainable renovation of residential buildings in Europe. The aim of this research is to investigate how regulatory changes and contractual...... be overcome with a package solution. In the Danish national context the package solution must consist of legislative changes, financial incentives and better dissemination of information. Therefore, an array of different tools must be integrated and used in cooperation to overcome the dilemma....

Revealing myths about people, energy and buildings

Energy Technology Data Exchange (ETDEWEB)

Diamond, R.; Moezzi, M.

2000-05-01

In this essay we take a closer look at some energy myths, focusing on the ways energy professionals and the public alike, talk, write and teach about how energy affects the way in which we design, operate, retrofit and inhabit buildings. What myths about people, energy and buildings are current today? Who tells these myths and why do we believe them? How do myths affect our behavior? Myths are a way of understanding the world we live in. They may represent incomplete understanding, or be based on premises that are scientifically not valid, but they help us understand and explain how the world works, and we shape our behavior accordingly.

Is Women's Empowerment Associated With Help-Seeking for Spousal Violence in India?

Science.gov (United States)

Rowan, Kathleen; Mumford, Elizabeth; Clark, Cari Jo

2018-05-01

Violence against women by their husbands is a problem for women worldwide. However, the majority of women do not seek help. This article presents findings from a national survey in India on empowerment-related correlates of help-seeking behaviors for currently married women who experienced spousal violence. We examined individual-, relationship-, and state-level measures of empowerment on help-seeking from informal and formal sources. Findings indicate that help-seeking is largely not associated with typical measures of empowerment or socio-economic development, whereas state-level indicators of empowerment may influence help-seeking. Although not a target of this study, we also note that injury from violence and the severity of the violence were among the strongest factors related to seeking help. Taken together, the low prevalence of help-seeking and lack of strong individual-level correlates, apart from severe harm, suggests widespread barriers to seeking help. Interventions that affect social norms and reach women and men across social classes in society are needed in addition to any individual-level efforts to promote seeking help for spousal violence.

Use of raw materials in the United States from 1900 through 2014

Science.gov (United States)

Matos, Grecia R.

2017-08-22

The economic growth of an industrialized nation such as the United States requires raw materials for construction (buildings, bridges, highways, and so forth), defense, and processing and manufacture of goods and services. Since the beginning of the 20th century, the types and quantities of raw materials used have increased and changed significantly. This fact sheet quantifies the amounts of raw materials (other than food and fuel) that have been used in the U.S. economy annually for a period of 115 years, from 1900 through 2014. It provides a broad overview of the quantity (weight) of nonfood and nonfuel materials used in the economy and illustrates the use and significance of raw nonfuel minerals in particular as building blocks of society.These data have been compiled to help the public and policymakers understand the changing annual flow of raw materials put into use in the United States. Such information can be helpful in assessing the potential effects of materials use on the environment, assessing materials’ intensity of use, and examining the role that these materials play in the economy. The data presented indicate the substitution and shift in materials usage from renewable to nonrenewable materials during the 20th century. The disaggregated quantities by commodity (not shown in this fact sheet) may be tested against supply adequacy and end of life issues.

Building Team Spirit in Organization Management Through a ...

African Journals Online (AJOL)

Building Team Spirit in Organization Management Through a System Approach. ... able to function and attain a dynamic equilibrium for desired level of maximum productivity. It thus helps the manager to pull the various components of the organization together with the awareness, desire and commitment for a common goal.

Boundary Dynamics: Implications for Building Parent-School Partnerships

Science.gov (United States)

Price-Mitchell, Marilyn

2009-01-01

This article draws on systems theory, complexity theory, and the organizational sciences to engage boundary dynamics in the creation of parent-school partnerships. These partnerships help children succeed through an emergent process of dialogue and relationship building in the peripheral spaces where parents and schools interact on behalf of…

Reconstructing building mass models from UAV images

KAUST Repository

Li, Minglei

2015-07-26

We present an automatic reconstruction pipeline for large scale urban scenes from aerial images captured by a camera mounted on an unmanned aerial vehicle. Using state-of-the-art Structure from Motion and Multi-View Stereo algorithms, we first generate a dense point cloud from the aerial images. Based on the statistical analysis of the footprint grid of the buildings, the point cloud is classified into different categories (i.e., buildings, ground, trees, and others). Roof structures are extracted for each individual building using Markov random field optimization. Then, a contour refinement algorithm based on pivot point detection is utilized to refine the contour of patches. Finally, polygonal mesh models are extracted from the refined contours. Experiments on various scenes as well as comparisons with state-of-the-art reconstruction methods demonstrate the effectiveness and robustness of the proposed method.

New building technology based on low energy design

International Nuclear Information System (INIS)

Meggers, Forrest; Leibundgut, Hansjurg

2009-01-01

Full text: The construction, operation and maintenance of all residential, commercial, and industrial buildings are responsible for over half of global greenhouse gas emissions, and two-thirds of global electricity is generated solely for building operation. This single sector has a huge potential impact on the future sustainability of society, and therefore new advanced technologies must be rapidly developed and implemented in what is often a slow-moving sector. The concept of the low exergy building has created a new framework for the development of high performance building systems. Exergy analysis has been used to help minimize the primary energy demands of buildings through the minimization of losses in the chain of energy supply in a building system. The new systems that have been created have been shown to be more comfortable and more energy efficient. These systems include integrated thermal mass systems heated by high efficiency heat pumps integrated with energy recovery systems that eliminate the waste that is common in building systems. The underlying principles and concepts of low exergy building systems will be presented along with the analysis of several technologies being implemented in a low Ex building in Zurich, Switzerland. These include an advanced ground source heat pump strategy with integrated heat recovery, decentralized ventilation, and a unique active wall insulation system, which are being researched as part of the IEA ECBCS Annex 49 (www.annex49.org). (author)

Forming the stress state of a vibroisolated building in the process of mounting rubber steel vibration isolator

Directory of Open Access Journals (Sweden)

Dashevskiy Mikhail Aronovich

2015-12-01

Full Text Available The necessity to specificate the formation process of stress-strain state of buildings in the construction process is a new problem which requires including real production characteristics going beyond calculation models into calculation methods. Today the construction process lacks this specification. When mounting vibroisolators the stress-strein of a structure state is changing. The mounting method of vibroisolators is patented and consists in multistage successive compression loading of each vibroisolator with the constant speed and following fixation of this displacement. The specified engineering method of rubber-steel pads calculation in view of change of their form during deformation, nonlinearity, rheological processes is offered. Resilient pads look like rubber plates rectangular in plane reinforced on the basic surfaces with metal sheets. The influence of a time-variable static load and free vibrations of loaded pads are considered.

Do Certified Buildings Enhance Indoor Environmental Quality and Performance of Office Work?

DEFF Research Database (Denmark)

Da Silva, Nuno Alexandre Faria; Wargocki, Pawel

2014-01-01

With the growth of sustainability consciousness, the awareness of stakeholders for high performance buildings has also increased. The concept of green buildings has appeared. Several voluntary environmental rating schemes for buildings were created. Their focus has been energy conservation...... on productivity and that an average employee cost can be >10-100 times higher than the rental operation and maintenance costs (Morrell, 2005; Persramet al., 2007). There is however lack of consistent and systematic data benchmarking benefits of green building, in particular as regards IEQ and the effects...... (Lee, 2011), the green building do not have to necessarily meet this postulation. Quite limited numbers of credits for enhancing IEQ offered by the schemes will certainly not very much help that the high IEQ is guaranteed. The present paper surveyed literature on green buildings to examine whether...

Using Symbolic Interactionism Insights as an Approach to Helping the Individual with Asperger's Syndrome Overcome Barriers to Social Inclusion

Science.gov (United States)

Hughes, Paul

2016-01-01

This article outlines a case for using symbolic interactionism as a tool to help individuals with Asperger's syndrome reconcile situations in which communication might prove challenging. This study builds on previous work carried out by the author which describes an autoethnographical approach to help the individual with Asperger's syndrome gain…

Lessons Learned From Transitioning PEPFAR Track 1.0 Care and Treatment Programs: Case Studies in Financial Management Capacity Building in Zambia and Botswana.

Science.gov (United States)

Kuehn, Chuck; Tidwell, George; Vhugen, Jann; Sharma, Anjali

2015-01-01

In 2008, the United States government mandated transition of internationally managed HIV care and treatment programs to local country ownership. Three case studies illustrate the US Health Resources Services Administration's fiscal assessment and technical assistance (TA) processes to strengthen local organizations' capabilities to absorb and manage United States government funding. Review of initial, TA and follow-up reports reveal that the 1 Botswanan and 2 Zambian organizations closed 10 of 17 financial capacity gaps, with Health Resources Services Administration assisting on 2. Zambian organizations requested and absorbed targeted TA on the basis of the consultant's desk review, their finance staff revised fiscal policies and procedures, and accordingly trained other staff. In Botswana, delays in integrating recommendations necessitated on-site TA for knowledge building and role modeling. Organizational maturity may explain differences in responsiveness, ownership, and required TA approaches. Clarifying expectations of capacity building, funding agreement, and nonmonetary donor involvement can help new organizations determine and act on intervening actions.

Helping Competencies of Student Affairs Professionals: A Delphi Study

Science.gov (United States)

Reynolds, Amy L.

2011-01-01

The purpose of this study was to gather student affairs professionals' perceptions of the knowledge and skills needed to effectively help students. Using the Delphi method, 159 entry-level and mid-level student affairs administrators from institutions across the United States were surveyed regarding their perceptions of the helping skills they use…

Building America Best Practices Series Volume 13: Energy Performance Techniques and Technologies: Preserving Historic Homes

Energy Technology Data Exchange (ETDEWEB)

Britt, Michelle L.; Baechler, Michael C.; Gilbride, Theresa L.; Hefty, Marye G.; Makela, Erin KB; Schneider, Elaine C.; Kaufman, Ned

2011-03-01

This guide is a resource to help contractors renovate historic houses, while addressing issues such as building durability, indoor air quality, and occupant health, safety, and comfort. The best practices described in this document are based on the results of research and demonstration projects conducted by Building America’s research teams. Building America brings together the nation’s leading building scientists with over 300 production builders to develop, test, and apply innovative, energy-efficient construction practices. The guide is available for download from the DOE Building America website www.buildingamerica.gov.

Office of Codes and Standards resource book. Section 1, Building energy codes and standards

Energy Technology Data Exchange (ETDEWEB)

Hattrup, M.P.

1995-01-01

The US Department of Energy`s (DOE`s) Office of Codes and Standards has developed this Resource Book to provide: A discussion of DOE involvement in building codes and standards; a current and accurate set of descriptions of residential, commercial, and Federal building codes and standards; information on State contacts, State code status, State building construction unit volume, and State needs; and a list of stakeholders in the building energy codes and standards arena. The Resource Book is considered an evolving document and will be updated occasionally. Users are requested to submit additional data (e.g., more current, widely accepted, and/or documented data) and suggested changes to the address listed below. Please provide sources for all data provided.

Associations between Fungal Species and Water-Damaged Building Materials

DEFF Research Database (Denmark)

Andersen, Birgitte; Frisvad, Jens Christian; Søndergaard, Ib

2011-01-01

melleus, Aspergillus niger, Aspergillus ochraceus, Chaetomium spp., Mucor racemosus, Mucor spinosus, and concrete and other floor-related materials. These results can be used to develop new and resistant building materials and relevant allergen extracts and to help focus research on relevant mycotoxins...

Energy use and environmental impact of new residential buildings

Energy Technology Data Exchange (ETDEWEB)

Adalberth, Karin

2000-01-01

The objective of this thesis is to investigate the energy use and environmental impact of residential buildings. Seven authentic buildings built in the 1990s in Sweden are investigated. They are analysed according to energy use and environmental impact during their life cycle: manufacture of building materials, transport of building materials and components to the building site, erection to a building, occupancy, maintenance and renovation, and finally demolition and removal of debris. Results show that approx. 85 % of the total estimated energy use during the life cycle is used during the occupation phase. The energy used to manufacture building and installation materials constitutes approx. 15 % of the total energy use. 70-90 % of the total environmental impact arises during the occupation phase, while the manufacture of construction and installation materials constitutes 10-20 %. In conclusion, the energy use and environmental impact during the occupation phase make up a majority of the total. At the end of the thesis, a tool is presented which helps designers and clients predict the energy use during the occupation phase for a future multi-family building before any constructional or installation drawings are made. In this way, different thermal properties may be elaborated in order to receive an energy-efficient and environmentally adapted dwelling.

A matrix in life cycle perspective for selecting sustainable materials for buildings in Sri Lanka

Energy Technology Data Exchange (ETDEWEB)

Abeysundara, U.G. Yasantha [Ministry of Education, Isurupaya, Battaramulla (Sri Lanka); Babel, Sandhya [Environmental Technology Program, School of Biochemical Engineering and Technology, Sirindhorn International Institute of Technology, Thammasat University, P.O. Box 22, Pathumthani 12121 (Thailand); Gheewala, Shabbir [The Joint Graduate School of Energy and Environment, King Mongkut' s University of Technology Thonburi, Bangkok 10140 (Thailand)

2009-05-15

This paper presents a matrix to select sustainable materials for buildings in Sri Lanka, taking into consideration environmental, economic and social assessments of materials in a life cycle perspective. Five building elements, viz., foundations, roofs, ceilings, doors and windows, and floors are analyzed based on materials used for these elements. Environmental burdens associated with these elements are analyzed in terms of embodied energy and environmental impacts such as global warming, acidification and nutrient enrichment. Economic analysis is based on market prices and affordability of materials. Social factors that are taken into account are thermal comfort, interior (aesthetics), ability to construct quickly, strength and durability. By compiling the results of analyses, two building types with minimum and maximum impacts are identified. These two cases along with existing buildings are compared in a matrix of environmental, economic and social scores. Analysis of the results also indicates need for higher consideration of environmental parameters in decision-making over social and economic factors, as social and economic scores do not vary much between cases. Hence, this matrix helps decision-makers to select sustainable materials for buildings, meaningfully, and thus helps to move towards a more sustainable buildings and construction sector. (author)

Tweeting : Smart meters raise awareness of energy consumption in buildings

Energy Technology Data Exchange (ETDEWEB)

Anon.

2009-11-15

The University of Mississippi (UM) will monitor, analyze and report on energy consumption in its campus buildings in real-time using SmartSynch Smart Meters. The technology uses smart meter data to help identify a detailed pattern of electricity usage with the objective of finding methods to alter behaviour to reduce electricity usage and carbon emissions. SmartSynch installed 16 Smart Meters on campus with additional deployments being planned. The technology will enable the university to monitor energy consumption, track building power performance over time, compare building energy usage, and review the impact of the weather on energy use while reducing its carbon footprint. Additionally, UM will use Facebook, Twitter and an RSS feed to provide regular public updates on its buildings' energy consumption based on SmartSynch Smart Meter data. Each building will have its own profile on the social networking sites. 1 ref., 1 fig.

Tweeting : Smart meters raise awareness of energy consumption in buildings

Energy Technology Data Exchange (ETDEWEB)

Anon,

2009-11-15

The University of Mississippi (UM) will monitor, analyze and report on energy consumption in its campus buildings in real-time using SmartSynch Smart Meters. The technology uses smart meter data to help identify a detailed pattern of electricity usage with the objective of finding methods to alter behaviour to reduce electricity usage and carbon emissions. SmartSynch installed 16 Smart Meters on campus with additional deployments being planned. The technology will enable the university to monitor energy consumption, track building power performance over time, compare building energy usage, and review the impact of the weather on energy use while reducing its carbon footprint. Additionally, UM will use Facebook, Twitter and an RSS feed to provide regular public updates on its buildings' energy consumption based on SmartSynch Smart Meter data. Each building will have its own profile on the social networking sites. 1 ref., 1 fig.

The CERN Electronics Pool moves to Building 13

CERN Multimedia

PH Department

2010-01-01

After 32 years in Building 4 R‐050, the CERN Electronics Pool will re‐open in Building 13 R009 on Monday 13 December at 10:00 As of this date, you will be able to come and choose the instruments you want: oscilloscopes and other measurement instruments, low and high voltage power supplies, modular instrumentation, etc. Please do not hesitate to consult the catalogue and give us any input you may have. The CERN Electronics Pool operates on a self-service basis (with a CERN budget code) and is available for any help you may need.

Using Joomla Building Powerful and Efficient Web Sites

CERN Document Server

Severdia, Ron

2010-01-01

Why use Joomla? Because with Joomla you don't need to have any technical expertise or web design experience to create effective websites and web apps. Whether you're creating your first website or building a multi-function site for a client, this book provides straightforward, hands-on instruction that makes it easy to learn this open source web content management system. Written by members of the Joomla Leadership Team, Using Joomla helps newcomers quickly learn the basics, while developers with Joomla experience will pick up best practices for building more sophisticated websites. You'll a

Communication for Influence : Building ICTD Networks in Central ...

International Development Research Centre (IDRC) Digital Library (Canada)

This project seeks to help achieve universal affordable access to broadband information and communication technology (ICT) infrastructure in a number of countries on the East and West coasts of Africa. It will do so by building regional ICT for development (ICTD) research and advocacy networks in Central, East and West ...

Fostering eco-innovation in SMEs through bridging research, education and industry for building a business oriented model

Directory of Open Access Journals (Sweden)

Hamburg Ileana

2017-07-01

Full Text Available Small and medium sized companies (SMEs assure economic growth in Europe. The Environmental Technologies Action Plan (ETAP concentrated and mobilized Member State and stakeholder efforts bringing eco-innovation from research to market, improving market conditions, opening up global markets. Rapid and reinforced actions are now required, building on the experience of ETAP helping SMEs to have benefits by introducing eco-innovative approaches into their operations. Particularly start-ups, can be the ideal incubators for eco-innovation, and can bring to market new, less environmentally damaging products, services and processes. Generally many SMEs are struggling to survive in an ongoing global recession and often they are becoming reluctant to release innovation, particularly eco-innovation (Assante et al., 2016. In this paper we present first the differences between eco-innovation based business models and those based on regular innovations. Secondly we give some approaches tested in national and European projects with participation of the authors in order to help SMEs to develop business models of eco-innovations. The first one is to build cooperation between researchers, educators and SME staff in order to explain SMEs the advantages of such models and to implement models designed by researchers. Secondly we used practice oriented forms of training for SMEs like Problem Based Learning (PBL as an efficient form for SMEs and entrepreneurship education to learn to solve problems like the building of an eco-innovation business model. Thirdly we use in our projects eco-innovation biographies (EIBs reflecting the evolutionary character of such innovations and the dynamics of related policy streams.

Building Web Reputation Systems

CERN Document Server

Farmer, Randy

2010-01-01

What do Amazon's product reviews, eBay's feedback score system, Slashdot's Karma System, and Xbox Live's Achievements have in common? They're all examples of successful reputation systems that enable consumer websites to manage and present user contributions most effectively. This book shows you how to design and develop reputation systems for your own sites or web applications, written by experts who have designed web communities for Yahoo! and other prominent sites. Building Web Reputation Systems helps you ask the hard questions about these underlying mechanisms, and why they're critical

Economic and environmental impacts of community-based residential building energy efficiency investment

International Nuclear Information System (INIS)

Choi, Jun-Ki; Morrison, Drew; Hallinan, Kevin P.; Brecha, Robert J.

2014-01-01

A systematic framework for evaluating the local economic and environmental impacts of investment in building energy efficiency is developed. Historical residential building energy data, community-wide economic input–output data, and emission intensity data are utilized. The aim of this study is to show the comprehensive insights and connection among achieving variable target reductions for a residential building energy use, economic and environmental impacts. Central to this approach for the building energy reduction goal is the creation of individual energy models for each building based upon historical energy data and available building data. From these models, savings estimates and cost implications can be estimated for various conservation measures. A ‘worst to first’ (WF) energy efficient investment strategy is adopted to optimize the level of various direct, indirect, and induced economic impacts on the local community. This evaluation helps to illumine opportunities to establish specific energy reduction targets having greatest economic impact in the community. From an environmental perspective, short term economy-wide CO 2 emissions increase because of the increased community-wide economic activities spurred by the production and installation of energy efficiency measures, however the resulting energy savings provide continuous CO 2 reduction for various target savings. - Highlights: • WF energy efficient strategy helps to optimize various level of economic impacts. • Greatest community benefits are achieved from specific energy reduction targets. • Community-wide economic impacts vary for different energy conservation measures

Lessons Learned from Case Studies of Six High-Performance Buildings

Energy Technology Data Exchange (ETDEWEB)

Torcellini, P.; Pless, S.; Deru, M.; Griffith, B.; Long, N.; Judkoff, R.

2006-06-01

Commercial buildings have a significant impact on energy use and the environment. They account for approximately 18% (17.9 quads) of the total primary energy consumption in the United States (DOE 2005). The energy used by the building sector continues to increase, primarily because new buildings are added to the national building stock faster than old buildings are retired. Energy consumption by commercial buildings will continue to increase until buildings can be designed to produce more energy than they consume. As a result, the U.S. Department of Energy's (DOE) Building Technologies Program has established a goal to create the technology and knowledge base for marketable zero-energy commercial buildings (ZEBs) by 2025.

Radiological evaluation of building materials used in Malumfashi ...

African Journals Online (AJOL)

... in building materials (sand, cement, blocks, granite, and paints) used in the construction of buildings in Malumfashi local Government area of Katsina state, Nigeria were determined by means of a gamma-ray spectrometry system using Sodium Iodide thallium activated (NaI(Tl)) detector in a low background configuration.

An Examination of the Performance Based Building Code on the Design of a Commercial Building

Directory of Open Access Journals (Sweden)

John Greenwood

2012-11-01

Full Text Available The Building Code of Australia (BCA is the principal code under which building approvals in Australia are assessed. The BCA adopted performance-based solutions for building approvals in 1996. Performance-based codes are based upon a set of explicit objectives, stated in terms of a hierarchy of requirements beginning with key general objectives. With this in mind, the research presented in this paper aims to analyse the impact of the introduction of the performance-based code within Western Australia to gauge the effect and usefulness of alternative design solutions in commercial construction using a case study project. The research revealed that there are several advantages to the use of alternative designs and that all parties, in general, are in favour of the performance-based building code of Australia. It is suggested that change in the assessment process to streamline the alternative design path is needed for the greater use of the performance-based alternative. With appropriate quality control measures, minor variations to the deemed-to-satisfy provisions could easily be managed by the current and future building surveying profession.

Towards measurement and verification of energy performance under the framework of the European directive for energy performance of buildings

International Nuclear Information System (INIS)

Burman, Esfand; Mumovic, Dejan; Kimpian, Judit

2014-01-01

Directive 2002/91/EC of the European Parliament and Council on the Energy Performance of Buildings has led to major developments in energy policies followed by the EU Member States. The national energy performance targets for the built environment are mostly rooted in the Building Regulations that are shaped by this Directive. Article 3 of this Directive requires a methodology to calculate energy performance of buildings under standardised operating conditions. Overwhelming evidence suggests that actual energy performance is often significantly higher than this standardised and theoretical performance. The risk is national energy saving targets may not be achieved in practice. The UK evidence for the education and office sectors is presented in this paper. A measurement and verification plan is proposed to compare actual energy performance of a building with its theoretical performance using calibrated thermal modelling. Consequently, the intended vs. actual energy performance can be established under identical operating conditions. This can help identify the shortcomings of construction process and building procurement. Once energy performance gap is determined with reasonable accuracy and root causes identified, effective measures could be adopted to remedy or offset this gap. - Highlights: • Building energy performance gap is a negative externality that must be addressed. • A method is proposed to link actual performance to building compliance calculation. • Energy performance gap is divided into procurement and operational gaps. • This framework enables policy makers to measure and address procurement gap. • Building fine-tuning by construction teams could also narrow operational gap

Policy Pathways: Modernising Building Energy Codes

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-01

Buildings are the largest consumers of energy worldwide and will continue to be a source of increasing energy demand in the future. Globally, the sector’s final energy consumption doubled between 1971 and 2010 to reach 2 794 million tonnes of oil equivalent (Mtoe), driven primarily by population increase and economic growth. Under current policies, the global energy demand of buildings is projected by the IEA experts to grow by an additional 838 Mtoe by 2035 compared to 2010. The challenges of the projected increase of energy consumption due to the built environment vary by country. In IEA member countries, much of the future buildings stock is already in place, and so the main challenge is to renovate existing buildings stock. In non-IEA countries, more than half of the buildings stock needed by 2050 has yet to be built. The IEA and the UNDP partnered to analyse current practices in the design and implementation of building energy codes. The aim is to consolidate existing efforts and to encourage more attention to the role of the built environment in a low-carbon and climate-resilient world. This joint IEA-UNDP Policy Pathway aims to share lessons learned between IEA member countries and non-IEA countries. The objective is to spread best practices, limit pressures on global energy supply, improve energy security, and contribute to environmental sustainability. Part of the IEA Policy Pathway series, Modernising building energy codes to secure our global energy future sets out key steps in planning, implementation, monitoring and evaluation. The Policy Pathway series aims to help policy makers implement the IEA 25 Energy Efficiency Policy Recommendations endorsed by IEA Ministers (2011).

Building with Earthquakes in Mind

Science.gov (United States)

Mangieri, Nicholas

2016-04-01

Earthquakes are some of the most elusive and destructive disasters humans interact with on this planet. Engineering structures to withstand earthquake shaking is critical to ensure minimal loss of life and property. However, the majority of buildings today in non-traditional earthquake prone areas are not built to withstand this devastating force. Understanding basic earthquake engineering principles and the effect of limited resources helps students grasp the challenge that lies ahead. The solution can be found in retrofitting existing buildings with proper reinforcements and designs to deal with this deadly disaster. The students were challenged in this project to construct a basic structure, using limited resources, that could withstand a simulated tremor through the use of an earthquake shake table. Groups of students had to work together to creatively manage their resources and ideas to design the most feasible and realistic type of building. This activity provided a wealth of opportunities for the students to learn more about a type of disaster they do not experience in this part of the country. Due to the fact that most buildings in New York City were not designed to withstand earthquake shaking, the students were able to gain an appreciation for how difficult it would be to prepare every structure in the city for this type of event.

Building Excellence: How Helping Charters Access Facilities Can Improve Opportunity for Idaho Kids

Science.gov (United States)

Robson, Kelly; Squire, Juliet

2016-01-01

To better understand charter leaders' experiences acquiring facilities, the authors conducted a survey of all charter school leaders in the state of Idaho. The leaders of 26 brick-and-mortar charter schools responded, representing 65 percent of all such charter schools in the state. The survey gathered a number of facilities-related data points,…

Aligning building information model tools and construction management methods

NARCIS (Netherlands)

Hartmann, Timo; van Meerveld, H.J.; Vossebeld, N.; Adriaanse, Adriaan Maria

2012-01-01

Few empirical studies exist that can explain how different Building Information Model (BIM) based tool implementation strategies work in practical contexts. To help overcoming this gap, this paper describes the implementation of two BIM based tools, the first, to support the activities at an

NLOS mitigation and ranging accuracy for building indoor positioning system in UWB using commercial radio modules

Science.gov (United States)

Alsudani, Ahlam

2018-05-01

In recent years, indoor positioning system (IPS) plays a very important role in several environments such as hospitals, airports, males, Etc. It is used to locate mobile stations such as human and robots inside buildings. Some of IPSs applications are: locating an elder or child needed for an urgent help in hospitals, emergency situations such as locating firefighters inside building on fire or policemen fitting terrorists inside building by a commander to help for expedite evacuation in case one of them need for help. In indoor positioning applications, the accuracy should be high as can as possible, in another word; the error should be less than 1 meter. The indoor environment is the major challenging to obtain such accuracy. In this paper, we present a novel algorithm to identify the line of sight (LOS) and non-line of sight (NLOS) channels and improve the positioning accuracy using ultra-wideband (UWB) technology implementing DW1000 devices.

Building a stakeholder network for the Indiana Climate Change Impacts Assessment

Science.gov (United States)

Dukes, J. S.; Widhalm, M.

2017-12-01

The Indiana Climate Change Impacts Assessment (IN CCIA) is a stakeholder-informed, service-driven resource developed under the coordination of the Purdue Climate Change Research Center (PCCRC) and with involvement from a diverse mix of contributors throughout the state. The IN CCIA brings together the best available climate change research into a series of reports aimed at helping Hoosiers better understand climate change-related risks so they can prepare for challenges and capitalize on opportunities. The IN CCIA development process aims to 1) increase the dialogue about climate change across the state, 2) provide Indiana decision makers with accessible, credible climate impact information, and 3) build a network of experts and stakeholders to support ongoing assessment efforts and knowledge sharing. This presentation will report on our experience with developing and maintaining a diverse stakeholder network. We will describe our efforts to connect with stakeholders before, during, and after the development of assessment reports and share the top themes that emerged from our pre-assessment inquires and other interactions.

Streamlining the Design-to-Build Transition with Build-Optimization Software Tools.

Science.gov (United States)

Oberortner, Ernst; Cheng, Jan-Fang; Hillson, Nathan J; Deutsch, Samuel

2017-03-17

Scaling-up capabilities for the design, build, and test of synthetic biology constructs holds great promise for the development of new applications in fuels, chemical production, or cellular-behavior engineering. Construct design is an essential component in this process; however, not every designed DNA sequence can be readily manufactured, even using state-of-the-art DNA synthesis methods. Current biological computer-aided design and manufacture tools (bioCAD/CAM) do not adequately consider the limitations of DNA synthesis technologies when generating their outputs. Designed sequences that violate DNA synthesis constraints may require substantial sequence redesign or lead to price-premiums and temporal delays, which adversely impact the efficiency of the DNA manufacturing process. We have developed a suite of build-optimization software tools (BOOST) to streamline the design-build transition in synthetic biology engineering workflows. BOOST incorporates knowledge of DNA synthesis success determinants into the design process to output ready-to-build sequences, preempting the need for sequence redesign. The BOOST web application is available at https://boost.jgi.doe.gov and its Application Program Interfaces (API) enable integration into automated, customized DNA design processes. The herein presented results highlight the effectiveness of BOOST in reducing DNA synthesis costs and timelines.

Building Extraction from Airborne Laser Scanning Data: An Analysis of the State of the Art

Directory of Open Access Journals (Sweden)

Ivan Tomljenovic

2015-03-01

Full Text Available This article provides an overview of building extraction approaches applied to Airborne Laser Scanning (ALS data by examining elements used in original publications, such as data set area, accuracy measures, reference data for accuracy assessment, and the use of auxiliary data. We succinctly analyzed the most cited publication for each year between 1998 and 2014, resulting in 54 ISI-indexed articles and 14 non-ISI indexed publications. Based on this, we position some built-in features of ALS to create a comprehensive picture of the state of the art and the progress through the years. Our analyses revealed trends and remaining challenges that impact the community. The results show remaining deficiencies, such as inconsistent accuracy assessment measures, limitations of independent reference data sources for accuracy assessment, relatively few documented applications of the methods to wide area data sets, and the lack of transferability studies and measures. Finally, we predict some future trends and identify some gaps which existing approaches may not exhaustively cover. Despite these deficiencies, this comprehensive literature analysis demonstrates that ALS data is certainly a valuable source of spatial information for building extraction. When taking into account the short civilian history of ALS one can conclude that ALS has become well established in the scientific community and seems to become indispensable in many application fields.

Help Helps, but Only so Much: Research on Help Seeking with Intelligent Tutoring Systems

Science.gov (United States)

Aleven, Vincent; Roll, Ido; McLaren, Bruce M.; Koedinger, Kenneth R.

2016-01-01

Help seeking is an important process in self-regulated learning (SRL). It may influence learning with intelligent tutoring systems (ITSs), because many ITSs provide help, often at the student's request. The Help Tutor was a tutor agent that gave in-context, real-time feedback on students' help-seeking behavior, as they were learning with an ITS.…

Formation of electric energy managers for government buildings; Formacao de gerentes de energia para predios publicos

Energy Technology Data Exchange (ETDEWEB)

Jota, Patricia Romeiro da Silva; Freitas, Maria Eugenia de Almeida; Santos, Tarcisio Antonio dos [Centro de Educacao Tecnologica de Minas Gerais (CEFET-MG), Belo Horizonte (Brazil); Nobre, Eduardo Carvalhaes [Companhia Energetica de Minas Gerais (CEMIG), Belo Horizonte, MG (Brazil)

2000-07-01

This paper presents a joint methodology developed by professors of the CEFET - Minas Gerais and the CEMIG, within the Project for Efficient Buildings approved by the PROCEL. The objective of the Course of Manager of Energy in Public Buildings is to provide information and tools that helping the incorporation of modern techniques of rational using and the energy conservation in public buildings.

Co-simulation of innovative integrated HVAC systems in buildings

Energy Technology Data Exchange (ETDEWEB)

Trcka, Marija; Hensena, Jan L.M.; Wetter, Michael

2010-06-21

Integrated performance simulation of buildings HVAC systems can help in reducing energy consumption and increasing occupant comfort. However, no single building performance simulation (BPS) tool offers sufficient capabilities and flexibilities to analyze integrated building systems and to enable rapid prototyping of innovative building and system technologies. One way to alleviate this problem is to use co-simulation, as an integrated approach to simulation. This article elaborates on issues important for co-simulation realization and discusses multiple possibilities to justify the particular approach implemented in the here described co-simulation prototype. The prototype is validated with the results obtained from the traditional simulation approach. It is further used in a proof-of-concept case study to demonstrate the applicability of the method and to highlight its benefits. Stability and accuracy of different coupling strategies are analyzed to give a guideline for the required coupling time step.

Steady-State Thermal Properties of Rectangular Straw-Bales (RSB for Building

Directory of Open Access Journals (Sweden)

Leonardo Conti

2016-10-01

Full Text Available Straw is an inevitable product of cereal production and is available in huge quantities in the world. In order to use straw-bales as a building material, the characteristic values of the thermal performances should be determined. To not lose the benefits of the cheapness and sustainability of the material, the characteristics must be determined with simple and inexpensive means and procedures. This research aims to implement tools and methods focused at the determination of the thermal properties of straw-bales. For this study, the guidelines dictated by ASTM and ISO were followed. A measurement system consisting of a Metering Chamber (MC was realized. The MC was placed inside a Climate Chamber (CC. During the test, a known quantity of energy is introduced inside MC. When the steady-state is reached, all the energy put into MC passes through its walls in CC, where it is absorbed by the air-conditioner. A series of thermopiles detect the temperature of the surfaces of the measurement system and of the specimen. Determining the amount of energy transmitted by the various parts of MC and by the specimen, it is possible to apply Fourier’s law to calculate the thermal conductivity of the specimen.