WorldWideScience

Sample records for heavy clay soils

  1. Simulation of Soil Water Content Variability in a Heavy Clay Soil under Contrasting Soil Managements

    Science.gov (United States)

    Pedrera, A.; Vanderlinden, K.; Martínez, G.; Espejo, A. J.; Giráldez, J. V.

    2012-04-01

    Soil water content (SWC) is a key variable for numerous physical, chemical and biological processes that take place at or near the soil surface. Understanding the spatial and temporal variability of SWC at the field scale is of prime importance for implementing efficient measurement strategies in applications. The aim of this study was to characterize the spatial and temporal variation of gravimetric SWC in a heavy clay soil, in a wheat-sunflower-legume rotation under conventional (CT) and no-till (NT) using a simple water balance model. An experimental field in SW Spain, where conventional (CT) and no-till (NT) management of a heavy clay soil are being compared since 1983, was sampled for gravimetric SWC on 38 occasions during 2008 and 2009. Topsoil clay content across the six plots was on average 55%, with a standard deviation of 2.7%. The soil profile was sampled at 54 locations, evenly distributed over the three CT and NT plots, at depths of 0-10, 25-35, and 55-65 cm. Topsoil water retention curves (SWRC) were determined in the laboratory on undisturbed soil samples from each of the 54 locations. A weather station recorded daily precipitation and evapotranspiration, as calculated by the Penman-Monteith FAO equation. The water balance was calculated using the Thornthwaite-Mather model with a daily time step. Three parameters, water holding capacity, and water evaporation corrector coefficients for each of the two years, were inversely estimated at the 54 SWC observation points and probability density functions were identified. Spatial variability of SWC was estimated using a Monte Carlo approach, and simulated and observed variability were compared. This Monte Carlo scheme, using a simple water balance model with only three parameters, was found to be useful for evaluating the influence of soil management on the variability of SWC in heavy clay soils.

  2. Efficient resource management in dairy farming on peat and heavy clay soils

    NARCIS (Netherlands)

    Visser, de P.H.B.; Keulen, van H.; Lantinga, E.A.; Udo, H.M.J.

    2001-01-01

    Peat and heavy clay soils in the Netherlands are mainly used for permanent grassland to support dairy farming. As a result of intensification in dairy farming during the last decades, environmental quality is threatened by high emissions of N and P. Increased drainage of the wet soils has induced

  3. Potential use of lateritic and marine clay soils as landfill liners to retain heavy metals.

    Science.gov (United States)

    Chalermyanont, Tanit; Arrykul, Surapon; Charoenthaisong, Nanthanit

    2009-01-01

    The potential of a lateritic soil and a marine clay, typical of those found in hot and humid climatic regions, was assessed for use as a landfill liner material. A series of tests were conducted - physical and chemical, batch adsorption, column, hydraulic conductivity, etc., - to evaluate the heavy metal sorption capacity, chemical compatibility of hydraulic conductivity, and transport parameters of the soils. Experimental results showed that the marine clay had better adsorption capacity than that of the lateritic soil and that its hydraulic conductivity was an order of magnitude lower. In addition, the hydraulic conductivities of both soils when permeated with low concentration heavy metal solutions were below 1x10(-7)cm/s. When permeated with Cr, Pb, Cd, Zn, and Ni solutions, the retardation factors of the lateritic soil and the marine clay ranged from 10 to 98 and 37 to 165, respectively, while the diffusion coefficients ranged from 1.0x10(-5) to 7.5x10(-6) and 3.0 to 9.14x10(-7)cm2/s, respectively. For both soils, Cr and Pb were retained relatively well, while Cd, Zn, and Ni were more mobile. The marine clay had higher retardation factors and lower diffusion coefficients, and its hydraulic conductivity was more compatible with Cr solution, than that of the lateritic soil. In general, the properties of the marine clay indicate that it has significant advantages over the lateritic soil as landfill liner material.

  4. Modified clay sorbents for wastewater treatment and immobilization of heavy metals in soils

    Science.gov (United States)

    Burlakovs, Juris; Klavins, Maris; Vincevica-Gaile, Zane; Stapkevica, Mara

    2014-05-01

    Soil and groundwater pollution with heavy metals is the result of both, anthropogenic and natural processes in the environment. Anthropogenic influence in great extent appears from industry, mining, treatment of metal ores and waste incineration. Contamination of soil and water can be induced by diffuse sources such as applications of agrochemicals and fertilizers in agriculture, air pollution from industry and transport, and by point sources, e.g., wastewater streams, runoff from dump sites and factories. Treatment processes used for metal removal from polluted soil and water include methodologies based on chemical precipitation, ion exchange, carbon adsorption, membrane filtration, adsorption and co-precipitation. Optimal removal of heavy metal ions from aqueous medium can be achieved by adsorption process which is considered as one of the most effective methods due to its cost-effectiveness and high efficiency. Immobilization of metals in contaminated soil also can be done with different adsorbents as the in situ technology. Use of natural and modified clay can be developed as one of the solutions in immobilization of lead, zinc, copper and other elements in polluted sites. Within the present study clay samples of different geological genesis were modified with sodium and calcium chlorides, iron oxyhydroxides and ammonium dihydrogen phosphate in variable proportions of Ca/P equimolar ratio to test and compare immobilization efficiency of metals by sorption and batch leaching tests. Sorption capacity for raw clay samples was considered as relatively lower referring to the modified species of the same clay type. In addition, clay samples were tested for powder X-ray difractometry, cation exchange, surface area properties, elemental composition, as well as scanning electron microscopy pictures of clay sample surface structures were obtained. Modified clay sorbents were tested for sorption of lead as monocontaminant and for complex contamination of heavy metals. The

  5. Simulation of water movement and isoproturon behaviour in a heavy clay soil using the MACRO model

    Directory of Open Access Journals (Sweden)

    T. J. Besien

    1997-01-01

    Full Text Available In this paper, the dual-porosity MACRO model has been used to investigate methods of reducing leaching of isoproturon from a structured heavy clay soil. The MACRO model was applied to a pesticide leaching data-set generated from a plot scale experiment on a heavy clay soil at the Oxford University Farm, Wytham, England. The field drain was found to be the most important outflow from the plot in terms of pesticide removal. Therefore, this modelling exercise concentrated on simulating field drain flow. With calibration of field-saturated and micropore saturated hydraulic conductivity, the drain flow hydrographs were simulated during extended periods of above average rainfall, with both the hydrograph shape and peak flows agreeing well. Over the whole field season, the observed drain flow water budget was well simulated. However, the first and second drain flow events after pesticide application were not simulated satisfactorily. This is believed to be due to a poor simulation of evapotranspiration during a period of low rainfall around the pesticide application day. Apart from an initial rapid drop in the observed isoproturon soil residue, the model simulated isoproturon residues during the 100 days after pesticide application reasonably well. Finally, the calibrated model was used to show that changes in agricultural practice (deep ploughing, creating fine consolidated seed beds and organic matter applications could potentially reduce pesticide leaching to surface waters by up to 60%.

  6. Water movement and isoproturon behaviour in a drained heavy clay soil: 1. Preferential flow processes

    Science.gov (United States)

    Haria, A. H.; Johnson, A. C.; Bell, J. P.; Batchelor, C. H.

    1994-12-01

    The processes and mechanisms that control pesticide transport from drained heavy clay catchments are being studied at Wytham Farm (Oxford University) in southern England. In the first field season field-drain water contained high concentrations of pesticide. Soil studies demonstrated that the main mechanism for pesticide translocation was by preferential flow processes, both over the soil surface and through the soil profile via a macropore system that effectively by-passed the soil matrix. This macropore system included worm holes, shrinkage cracks and cracks resulting from ploughing. Rainfall events in early winter rapidly created a layer of saturation in the A horizon perched above a B horizon of very low hydraulic conductivity. Drain flow was initiated when the saturated layer in the A horizon extended into the upper 0.06m of the soil profile; thereafter water moved down slope via horizontal macropores possibly through a band of incorporated straw residues. These horizontal pathways for water movement connected with the fracture system of the mole drains, thus feeding the drains. Overland flow occurred infrequently during the season.

  7. Acceptable levels of heavy metals (Cd, Cr, Cu, Ni, Pb, Zn) in soils, depending on their clay and humus content and cation-exchange capacity

    NARCIS (Netherlands)

    Haan, de S.; Rethfeld, H.; Driel, van W.

    1985-01-01

    Three sandy soils differing in humus content and three clay soils differing in clay content were supplied with heavy metals to determine which loading rate of each single metal should be regarded as critical from the viewpoint of crop yield and metal content dependent on soil cation exchange capacit

  8. Selectivity sequences and sorption capacities of phosphatic clay and humus rich soil towards the heavy metals present in zinc mine tailing.

    Science.gov (United States)

    Chaturvedi, Pranav Kumar; Seth, Chandra Shekhar; Misra, Virendra

    2007-08-25

    Sorption efficacy of phosphatic clay and humus rich soil alone and on combination were tested towards heavy metals present in zinc mine tailing (Zawar Zinc Mine), Udaipur (India). Characterization of the zinc mine tailing sample indicated the presence of Pb, Cu, Zn and Mn in the concentration of 637, 186, 720 and 577microg(-1), respectively. For sorption efficacy, the zinc mine tailing soil were properly amended with phosphatic clay and humus rich soil separately and in combination and leachability study was performed by batch experiment at different pH range from 3 to 9. The data showed that the percent leachability of heavy metal in non-amended soil was 75-90%. After amendment with phosphatic clay percent leachability of heavy metals became 35-45%. Further, the addition of humus soil to phosphatic clay decreased the percent leachability up to 5-15% at all tested pH. Column leachability experiment was performed to evaluate the rate of leachability. The shape of cumulative curves of Pb, Cu, Zn and Mn showed an increase in its concavity in following order: PbCu>Zn>Mn. Further, Langmuir isotherms applied for the sorption studies indicated that phosphatic clay in the presence of humus soil had high affinity for Pb followed by Cu, Zn and Mn, with sorption capacities (b) 139.94, 97.02, 83.32 and 67.58microgg(-1), respectively.

  9. Relationship between heavy metals and minerals extracted from soil clay by standard and novel acid extraction procedures.

    Science.gov (United States)

    Melo, Vander Freitas; Batista, Araína Hulmann; Gilkes, Robert J; Rate, Andrew W

    2016-12-01

    Strong acid digestions are commonly used to determine heavy metal (HM) contents in soils. In order to understand more fully the acid digestion processes, a logical step is to determine the extent of dissolution of mineral phases. The aims of this study were to compare the efficiency of extraction of HM by different acid digestions and to monitor the associated dissolution of the clay fraction. The context of the study was to develop a milder chemical extraction method (microwave-assisted 1 mol L(-1) HNO3 closed system (NACS)), which recovers more reactive HM and with little dissolution of minerals. The different acid digestion methods dissolved different amounts of minerals from the clay fraction. Both aqua regia (AR) and EPA 3051 dissolved all of the Fe and Al oxides, and the dissolution of kaolin was limited to thinner particles (c dimension), smaller particles in a and b dimensions and grains with lower crystallinity. The lower recovery of HM for AR compared with EPA 3051 was related to the large amount of short-range order phases formed during the AR extraction as these phases have the capacity to re-adsorb HM. The new method (NACS) has the potential to replace other methods of determining bioavailable forms of HM, such as AR and EPA 3051. The contents of Pb, As, Co, Zn, and Cu determined by EPA 3051 and EPA 3052 were quite close.

  10. Carbon storage in a heavy clay soil landfill site after biosolid application

    Energy Technology Data Exchange (ETDEWEB)

    Bolan, N.S., E-mail: Nanthi.Bolan@unisa.edu.au [Centre for Environmental Risk Assessment and Remediation (CERAR), University of South Australia, SA 5095 (Australia); Cooperative Research Centre for Contaminants Assessment and Remediation of the Environment (CRC CARE), University of South Australia, SA 5095 (Australia); Kunhikrishnan, A. [Chemical Safety Division, Department of Agro-Food Safety, National Academy of Agricultural Science, Suwon-si, Gyeonggi-do 441-707 (Korea, Republic of); Naidu, R. [Centre for Environmental Risk Assessment and Remediation (CERAR), University of South Australia, SA 5095 (Australia); Cooperative Research Centre for Contaminants Assessment and Remediation of the Environment (CRC CARE), University of South Australia, SA 5095 (Australia)

    2013-11-01

    Applying organic amendments including biosolids and composts to agricultural land could increase carbon (C) storage in soils and contribute significantly to the reduction of greenhouse gas emissions. Although a number of studies have examined the potential value of biosolids as a soil conditioner and nutrient source, there has been only limited work on the impact of biosolid application on C sequestration in soils. The objective of this study was to examine the potential value of biosolids in C sequestration in soils. Two types of experiments were conducted to examine the effect of biosolid application on C sequestration. In the first laboratory incubation experiment, the rate of decomposition of a range of biosolid samples was compared with other organic amendments including composts and biochars. In the second field experiment, the effect of biosolids on the growth of two bioenergy crops, Brassica juncea (Indian mustard) and Helianthus annuus (sunflower) on a landfill site was examined in relation to biomass production and C sequestration. The rate of decomposition varied amongst the organic amendments, and followed: composts > biosolids > biochar. There was a hundred fold difference in the rate of decomposition between biochar and other organic amendments. The rate of decomposition of biosolids decreased with increasing iron (Fe) and aluminum (Al) contents of biosolids. Biosolid application increased the dry matter yield of both plant species (by 2–2.5 fold), thereby increasing the biomass C input to soils. The rate of net C sequestration resulting from biosolid application (Mg C ha{sup −1} yr{sup −1} Mg{sup −1} biosolids) was higher for mustard (0.103) than sunflower (0.087). Biosolid application is likely to result in a higher level of C sequestration when compared to other management strategies including fertilizer application and conservation tillage, which is attributed to increased microbial biomass, and Fe and Al oxide-induced immobilization of C

  11. The role of dissolved organic matter and its adsorption for the fate of heavy metals in clay-rich soil

    Science.gov (United States)

    Refaey, Yasser B.; Jansen, Boris; El-Shater, Abdel-Hamid; El-Haddad, Abdel-Aziz; Kalbitz, Karsten

    2014-05-01

    Heavy metals (HMs), due to their toxic and hazardous nature, are possibly the most widespread contaminants imposing a serious threat to human health. To find out the effect of dissolved organic matter (DOM) and soil constituents on the uptake of Cu, Ni, and Zn, batch adsorption experiments were conducted using five soils sampled from Egypt. Sorption data were interpreted in terms of the initial mass (IM) isotherm model. In all soils, for all metals and in all experiments, the majority of the HMs were immobilized on the solid phase. The addition of DOM and timing thereof was found to play a pivotal role in determining the affinity of the HMs for the solid phase. When DOM and HMs were added simultaneously, Cu affinity decreased in Fe-(hydr)oxide rich soils (by 7%) and increased in soils poor in Fe-(hydr)oxide (by 6-10%). When DOM was added first, followed by HMs in a later stage affinity of Cu strongly increased in most soils. In contrast, for both Ni and Zn the affinity to the solid phase was enhanced (3-18%) in presence of DOM regardless of whether the DOM was added simultaneously with or prior to HMs addition. The difference is explained by Cu binding to the solid phase and to DOM through strong inner-sphere complexes, whereas Ni and Zn interacted predominantly through weaker electrostatic interactions. As a result Cu was able to bind more strongly to previously adsorbed DOM on the solid phase in case of smectite, while this effect was counteracted by the coating of available specific binding sites on Fe-(hydr)oxides.

  12. Disturbance of water-extractable phosphorus determination by colloidal particles in a heavy clay soil from the Netherlands

    NARCIS (Netherlands)

    Koopmans, G.F.; Chardon, W.J.; Salm, van der C.

    2005-01-01

    Received for publication January 25, 2005. Water extraction methods are widely used to extract phosphorus (P) from soils for both agronomic and environmental purposes. Both the presence of soil colloids in soil water filtrates, and the contribution of colloidal P to the molybdate-reactive phosphorus

  13. Soil heavy metals

    Energy Technology Data Exchange (ETDEWEB)

    Sherameti, Irena [Jena Univ. (Germany). Inst. fuer Allgemeine Botanik und Pflanzenphysiologie; Varma, Ajit (eds.) [Amity Univ., Uttar Pradesh (India). Amity Inst. of Microbial Technology; Amity Science, Technology and Innovation Foundation, Noida, UP (India)

    2010-07-01

    Human activities have dramatically changed the composition and organisation of soils. Industrial and urban wastes, agricultural application and also mining activities resulted in an increased concentration of heavy metals in soils. How plants and soil microorganisms cope with this situation and the sophisticated techniques developed for survival in contaminated soils is discussed in this volume. The topics presented include: the general role of heavy metals in biological soil systems; the relation of inorganic and organic pollutions; heavy metal, salt tolerance and combined effects with salinity; effects on abuscular mycorrhizal and on saprophytic soil fungi; heavy metal resistance by streptomycetes; trace element determination of environmental samples; the use of microbiological communities as indicators; phytostabilization of lead polluted sites by native plants; effects of soil earthworms on removal of heavy metals and the remediation of heavy metal contaminated tropical land. (orig.)

  14. Clay Dispersibility and Soil Friability-Testing the Soil Clay-to-Carbon Saturation Concept

    DEFF Research Database (Denmark)

    Schjønning, Per; de Jonge, Lis Wollesen; Munkholm, Lars Juhl;

    2012-01-01

    Soil organic carbon (OC) influences clay dispersibility, which affects soil tilth conditions and the risk of vertical migration of clay colloids. No universal lower threshold of OC has been identified for satisfactory stabilization of soil structure. We tested the concept of clay saturation with OC...... as a predictor of clay dispersibility and soil friability. Soil was sampled 3 yr in a field varying in clay content (∼100 to ∼220 g kg−1 soil) and grown with different crop rotations. Clay dispersibility was measured after end-over-end shaking of field-moist soil and 1- to 2-mm sized aggregates either air......-dried or rewetted to −100 hPa matric potential. Tensile strength of 1- to 2-, 2- to 4-, 4- to 8-, and 8- to 16-mm air-dried aggregates was calculated from their compressive strength, and soil friability estimated from the strength–volume relation. Crop rotation characteristics gave only minor effects on clay...

  15. CLAY SOIL STABILISATION USING POWDERED GLASS

    OpenAIRE

    2014-01-01

    This paper assesses the stabilizing effect of powdered glass on clay soil. Broken waste glass was collected and ground into powder form suitable for addition to the clay soil in varying proportions namely 1%, 2%, 5%, 10% and 15% along with 15% cement (base) by weight of the soil sample throughout. Consequently, the moisture content, specific gravity, particle size distribution and Atterberg limits tests were carried out to classify the soil using the ASSHTO classification system. Based on the...

  16. The Characteristic and Activation of Mixed Andisol Soil/Bayat Clays/Rice Husk Ash as Adsorbent of Heavy Metal Chromium (Cr)

    Science.gov (United States)

    Pranoto; Sajidan; Suprapto, A.

    2017-02-01

    Chromium (Cr) concentration in water can be reduced by adsorption. This study aimed to determine the effect of Andisol soil composition/Bayat clay/husk ash, activation temperature and contact time of the adsorption capacity of Cr in the model solution; the optimum adsorption conditions and the effectiveness of ceramic filters and purifiers to reduce contaminant of Cr in the water. The mixture of Andisol soil, Bayat clay, and husk ash is used as adsorbent of metal ion of Cr(III) using batch method. The identification and characterisation of adsorbent was done with NaF test, infrared spectroscopy (FTIR), X-ray diffraction (XRD). Cr metal concentrations were analyzed by atomic absorption spectroscopy. Sorption isotherms determined by Freundlich equation and Langmuir. The optimum conditions of sorption were achieved at 150°C activation temperature, contact time of 30 minutes and a composition Andisol soil / Bayat clay / husk ash by comparison 80/10/10. The results show a ceramic filter effectively reduces total dissolved solids (TDS) and Chromium in the water with the percentage decrease respectively by 75.91% and 9.44%.

  17. Quick clay and landslides of clayey soils

    NARCIS (Netherlands)

    Khaldoun, A.; Moller, P.; Fall, A.; Wegdam, G.; de Leeuw, B.; Méheust, Y.; Fossum, J.O.; Bonn, D.

    2009-01-01

    We study the rheology of quick clay, an unstable soil responsible for many landslides. We show that above a critical stress the material starts flowing abruptly with a very large viscosity decrease caused by the flow. This leads to avalanche behavior that accounts for the instability of quick clay s

  18. Solute transport in cracking clay soils

    NARCIS (Netherlands)

    Bronswijk, J.J.B.; Ritsema, C.J.; Oostindie, K.; Hamminga, P.

    1996-01-01

    A bromide tracer applied to a cracked clay soil was adsorbed in the soil matrix close to the soil surface. Upon subsequent precipitation, a small part of the bromide dissolved and flowed rapidly through cracks to the subsoil and the groundwater. As a result, the groundwater and the drain discharge

  19. Soil clay content underlies prion infection odds

    Science.gov (United States)

    David, Walter W.; Walsh, D.P.; Farnsworth, Matthew L.; Winkelman, D.L.; Miller, M.W.

    2011-01-01

    Environmental factors-especially soil properties-have been suggested as potentially important in the transmission of infectious prion diseases. Because binding to montmorillonite (an aluminosilicate clay mineral) or clay-enriched soils had been shown to enhance experimental prion transmissibility, we hypothesized that prion transmission among mule deer might also be enhanced in ranges with relatively high soil clay content. In this study, we report apparent influences of soil clay content on the odds of prion infection in free-ranging deer. Analysis of data from prion-infected deer herds in northern Colorado, USA, revealed that a 1% increase in the clay-sized particle content in soils within the approximate home range of an individual deer increased its odds of infection by up to 8.9%. Our findings suggest that soil clay content and related environmental properties deserve greater attention in assessing risks of prion disease outbreaks and prospects for their control in both natural and production settings. ?? 2011 Macmillan Publishers Limited. All rights reserved.

  20. Remediation of copper polluted red soils with clay materials

    Institute of Scientific and Technical Information of China (English)

    Gangya Zhang; Yunqing Lin; Mingkuang Wang

    2011-01-01

    Attapulgite and montmorillonite were utilized to remediate heavy metal polluted red soils in Guixi City, Jiangxi Province, China.The effects of clay minerals on availability, chemical distribution, and biotoxicity of Cu and Zn were evaluated.The results provided a reference for the rational application of clay materials to remediate heavy metal contaminated soils.From the sorption experiment,the maximum adsorbed Cu2+ by attapulgite and montmorillonite was 1501 and 3741 mg/kg, respectively.After polluted red soil was amended with attapulgite or montmorillonite and cultured at 30 and 60 days, soil pH increased significantly compared to the control.An 8% increase in the amount of montmorillonite in soil and 30 days incubation decreased acid exchangeable Cu by 24.7% compared to the control red soil.Acid exchangeable Cu decreased with increasing amounts of attapulgite and montmorillonite, with best remediation effect reached at a dose of 8%.Results also showed that the Cu poisoning effect on earthworms was reduced with the addition of attapulgite and montmorillonite.Montmoriilonite showed the best effect, with the addition of a 2% dose the mortality of earthworms decreased from 60% to zero compared to the control.Our results indicated that the bioavailability of Cu in soils was reduced more effectively with the application of montmorillonite than attapulgite.

  1. Remediation of copper polluted red soils with clay materials.

    Science.gov (United States)

    Zhang, Gangya; Lin, Yunqing; Wang, Mingkuang

    2011-01-01

    Attapulgite and montmorillonite were utilized to remediate heavy metal polluted red soils in Guixi City, Jiangxi Province, China. The effects of clay minerals on availability, chemical distribution, and biotoxicity of Cu and Zn were evaluated. The results provided a reference for the rational application of clay materials to remediate heavy metal contaminated soils. From the sorption experiment, the maximum adsorbed Cu2+ by attapulgite and montmorillonite was 1501 and 3741 mg/kg, respectively. After polluted red soil was amended with attapulgite or montmorillonite and cultured at 30 and 60 days, soil pH increased significantly compared to the control. An 8% increase in the amount of montmorillonite in soil and 30 days incubation decreased acid exchangeable Cu by 24.7% compared to the control red soil. Acid exchangeable Cu decreased with increasing amounts of attapulgite and montmorillonite, with best remediation effect reached at a dose of 8%. Results also showed that the Cu poisoning effect on earthworms was reduced with the addition of attapulgite and montmorillonite. Montmorillonite showed the best effect, with the addition of a 2% dose the mortality of earthworms decreased from 60% to zero compared to the control. Our results indicated that the bioavailability of Cu in soils was reduced more effectively with the application of montmorillonite than attapulgite.

  2. Effective Removal of Heavy Metals from Wastewater Using Modified Clay.

    Science.gov (United States)

    Song, Mun-Seon; Vijayarangamuthu, K; Han, EunJi; Jeon, Ki-Joon

    2016-05-01

    We report an economical and eco-friendly way to remove the heavy metal pollutant using modified clay. The modification of clay was done by calcining the natural clay from Kyushu region in Japan. Further, the removal efficiency for various pH and contact time was evaluated. The morphology of the clays was studied using the scanning electron microscopy (SEM). The structural and chemical analyses of modified clay were done by using X-ray diffraction (XRD), Raman spectroscopy, and Energy dispersion analysis (EDAX) to understand the properties related to the removal of heavy metal pollutant. Further, we studied the absorption efficiency of clay for various pH and contacting time using Ni polluted water. The modified clays show better removal efficiency for all pH with different saturation time. The adsorption follows pseudo-second order kinetics and the adsorption capacity of modified clay is 1.5 times larger than that of natural clay. The increase in the adsorption efficiency of modified clay was correlated to the increase in hematite phase along with increase in surface area due to surface morphological changes.

  3. Quick clay and landslides of clayey soils.

    Science.gov (United States)

    Khaldoun, Asmae; Moller, Peder; Fall, Abdoulaye; Wegdam, Gerard; De Leeuw, Bert; Méheust, Yves; Otto Fossum, Jon; Bonn, Daniel

    2009-10-30

    We study the rheology of quick clay, an unstable soil responsible for many landslides. We show that above a critical stress the material starts flowing abruptly with a very large viscosity decrease caused by the flow. This leads to avalanche behavior that accounts for the instability of quick clay soils. Reproducing landslides on a small scale in the laboratory shows that an additional factor that determines the violence of the slides is the inhomogeneity of the flow. We propose a simple yield stress model capable of reproducing the laboratory landslide data, allowing us to relate landslides to the measured rheology.

  4. Quantitative approach on SEM images of microstructure of clay soils

    Institute of Scientific and Technical Information of China (English)

    施斌; 李生林; M.Tolkachev

    1995-01-01

    The working principles of Videolab Image Processing System (VIPS), the examining methods of orientation of microstructural units of clay soils and analysing results on SEM images of some typical microstructures of clay soils using the VIPS are introduced.

  5. Effect of heavy metals on soil fungi

    Science.gov (United States)

    Sosak-Świderska, Bożena

    2010-05-01

    Fungi constitute a high proportion of the microbial biomass in soil.Being widespread in soil their large surface-to-volume ratio and high metabolic activity, fungi can contribute significantly to heavy metal dynamics in soil. At neutral pH heavy metals in soils tend to be immobilized to precipitation and/or absorption to cation exchange sites of clay minerals. In the acidic soils, metals are more mobile and enter food webs easier. Microbial production of acids and chelating agents can mobilize to toxic metals. Mobilization is often by uptake and intracellular accumulation of the heavy metlas, and in this way, the bioavailability of metals towards other organisms can be more reduced. Fungi were isolated from soils from Upper Silesia in Poland and belonged to widespread genera: Aspergillus, Cladosporium, Penicillium and Trichoderma. Fungi from different taxonomic groups differ greatly in their tolerance to heavy metals. This could be related to their wall structure and chemistry as well as biochemical and physiological characteristics of fungi. Localization of metals in fungal cells was studied using electron microscopy analysis. Metal biosorption in the cell wall can be complex as melanin granules. Fungal vacuoles have an important role in the regulation of the cytosolic concentration of metal ions, and may contribute to heavy metal tolerance.In polluted soils with heavy metals, fungal species composition can be changed and their physiological activity can be changed, too.

  6. CLAY SOIL STABILISATION USING POWDERED GLASS

    Directory of Open Access Journals (Sweden)

    J. OLUFOWOBI

    2014-10-01

    Full Text Available This paper assesses the stabilizing effect of powdered glass on clay soil. Broken waste glass was collected and ground into powder form suitable for addition to the clay soil in varying proportions namely 1%, 2%, 5%, 10% and 15% along with 15% cement (base by weight of the soil sample throughout. Consequently, the moisture content, specific gravity, particle size distribution and Atterberg limits tests were carried out to classify the soil using the ASSHTO classification system. Based on the results, the soil sample obtained corresponded to Group A-6 soils identified as ‘fair to poor’ soil type in terms of use as drainage and subgrade material. This justified stabilisation of the soil. Thereafter, compaction, California bearing ratio (CBR and direct shear tests were carried out on the soil with and without the addition of the powdered glass. The results showed improvement in the maximum dry density values on addition of the powdered glass and with corresponding gradual increase up to 5% glass powder content after which it started to decrease at 10% and 15% powdered glass content. The highest CBR values of 14.90% and 112.91% were obtained at 5% glass powder content and 5mm penetration for both the unsoaked and soaked treated samples respectively. The maximum cohesion and angle of internal friction values of 17.0 and 15.0 respectively were obtained at 10% glass powder content.

  7. Cations extraction of sandy-clay soils from cavado valley, portugal, using sodium salts solutions

    OpenAIRE

    Silva João Eudes da; Castro Fernando

    2002-01-01

    Cases of contamination by metals in the water wells of the Cavado Valley in north-west Portugal can be attributed to the heavy leaching of clay soils due to an excess of nitrogen resulting from the intensive use of fertilisers in agricultural areas. This work focuses on the natural weathering characteristics of soils, particularly the clay material, through the study of samples collected near the River Cavado. Samples taken from various sites, after physico-chemical characterisation, were sub...

  8. Clay mineral type effect on bacterial enteropathogen survival in soil.

    Science.gov (United States)

    Brennan, Fiona P; Moynihan, Emma; Griffiths, Bryan S; Hillier, Stephen; Owen, Jason; Pendlowski, Helen; Avery, Lisa M

    2014-01-15

    Enteropathogens released into the environment can represent a serious risk to public health. Soil clay content has long been known to have an important effect on enteropathogen survival in soil, generally enhancing survival. However, clay mineral composition in soils varies, and different clay minerals have specific physiochemical properties that would be expected to impact differentially on survival. This work investigated the effect of clay materials, with a predominance of a particular mineral type (montmorillonite, kaolinite, or illite), on the survival in soil microcosms over 96 days of Listeria monocytogenes, Salmonella Dublin, and Escherichia coli O157. Clay mineral addition was found to alter a number of physicochemical parameters in soil, including cation exchange capacity and surface area, and this was specific to the mineral type. Clay mineral addition enhanced enteropathogen survival in soil. The type of clay mineral was found to differentially affect enteropathogen survival and the effect was enteropathogen-specific.

  9. Change of microstructure of clays due to the presence of heavy metal ions in pore water

    Directory of Open Access Journals (Sweden)

    Saiyouri N.

    2010-06-01

    Full Text Available The compressibility of engineered barrier clays is, to a large extent, controlled by microstructure change due to the presence of chemical ions in clay-water system. This paper aims to investigate the change of microstructure of clays due to the presence of heavy metal ions in pore water. We use two pure clays (kaolinite and bentonite in the study. One-dimensional consolidation tests were performed on reconstituted samples, which are prepared with distilled water and three types of heavy metal solutions (Pb(NO32, Cu(NO32, Zn(NO32,. In order to better understand the impact of chemical pore fluid on microstructure of the two clays, following the consolidation test, scanning electron microscope (SEM observations and mercury intrusion pore size distribution measurements (MIP were conducted. Due to the measurement range of MIP, which is only allowed to measure the minimal pore size 20 Å, BET method by gas sorption, whose measurement pore size range is from 3.5 Å to 500 Å, is used to measure the micropore size distribution. By this method, specific surface area of the soils can be also determined. It can be employed to demonstrate the difference of creep performance between the soils. Furthermore, a series of batch equilibrium tests were conducted to better understand the physical-chemical interactions between the particles of soils and the heavy metal ions. With the further consideration of the interparticle electrical attractive and repulsive force, an attempt has been made to predict the creep behaviour by using the modified Gouy-Chapman double layer theory. The results of calculation were compared with that of tests. The comparison shows that the prediction of compressibility of the clays according to the modified double diffuse layer theory can be reasonably agreement with the experimental data.

  10. Assessment of heavy metals leachability from traditional clay pots ...

    African Journals Online (AJOL)

    Leachate from the clay raw pulp material was initially analysed for heavy metals ... Cd, Fe and Zn. Results of this study showed that Pb, Cd and Fe were transferred ... are different from regions to region and the techniques of making them differ, ...

  11. STABILISATION OF SILTY CLAY SOIL USING CHLORIDE

    Directory of Open Access Journals (Sweden)

    TAMADHER T. ABOOD

    2007-04-01

    Full Text Available The object of this paper is to investigate the effect of adding different chloride compounds including (NaCl, MgCl2, CaCl2 on the engineering properties of silty clay soil. Various amounts of salts (2%, 4%, and 8% were added to the soil to study the effect of salts on the compaction characteristics, consistency limits and compressive strength. The main findings of this study were that the increase in the percentage of each of the chloride compounds increased the maximum dry density and decrease the optimum moisture content. The liquid limit, plastic limit and plasticity index decreased with the increase in salt content. The unconfinedcompressive strength increased as the salt content increased.

  12. Evidence for groundwater contamination by heavy metals through soil passage under acidifying conditions

    OpenAIRE

    Wilkens, B. J.

    1995-01-01

    The research reported here is aimed at improving the knowledge of the mobility of the heavy metals cadmium and zinc in vulnerable soil types. We use the term vulnerable with reference to vulnerability of groundwater for contamination by soil leaching. At diffuse soil immissions of heavy metals, accumulation is often supposed to occur mainly in the topsoil. Binding of heavy metals in this soil compartment is relatively strong, because of de presence of soil organic matter, clay-minerals and se...

  13. Wave liquefaction in soils with clay content

    DEFF Research Database (Denmark)

    Kirca, Özgür; Sumer, B. Mutlu; Fredsøe, Jørgen

    2012-01-01

    The paper presents the results of an experimental study of the influence of clay content (in silt-clay and sand-clay mixtures) on liquefaction beneath progressive waves. The experiments showed that the influence of clay content is very significant. Susceptibility of silt to liquefaction...... is increased with increasing clay content, up to 30%, beyond which the mixture of silt and clay is not liquefied. Sand may become prone to liquefaction with the introduction of clay, contrary to the general perception that this type of sediment is normally liquefaction resistant under waves....

  14. Interaction of Uranium Mill Tailings Leachate with Soils and Clay Liners

    Energy Technology Data Exchange (ETDEWEB)

    Gee, G. W.; Campbell, A. C.; Sherwood, D. R.; Strickert, R. G.; Phillips, S. J.

    1980-06-01

    This study evaluates leachate-soil interactions that will take place at the Morton Ranch for certain disposal alternatives. Laboratory tests were conducted to evaluate the following: 1) physical and chemical characteristics of geologic materials from the Morton Ranch. 2) physical and chemical characteristics of acid leach tailings and tallings solution, 3) leaching tests with selected tailings materials and leach solutions to evaluate the leachability of contaminants with time under specific disposal alternatives, 4) adsorption studies measuring the sorption characteristics of heavy metals and radionuclides on the geologic materials at Morton Ranch, 5) clay liner stability tests to evaluate effects of acid leachate on clay mineralogy and clay permeability.

  15. Rapid nutrient leaching to groundwater and surface water in clay soil areas

    NARCIS (Netherlands)

    Bronswijk, J.J.B.; Hamminga, W.; Oostindie, K.

    1995-01-01

    The mechanism and magnitude of nitrate leaching from grassland on a heavy clay soil were investigated by measuring nitrogen input, and nitrate concentrations in groundwater and drain discharge for two years. A bromide tracer was applied to study solute transport mechanisms. Nitrate transport in the

  16. Main Clay Minerals in Soils of Fujian Province,China

    Institute of Scientific and Technical Information of China (English)

    WANGGUO; ZHANGWEIMING; 等

    1996-01-01

    The clay minerals of more than 200 soil samples collected from various sites of Fujian Province were studied by the X-ray diffraction method and transmission electron microscopy to study their distribution and evolution.Montmorillonite was found in coastal solonchak,paddy soils derived from marine deposit,lacustrine deposit and river deposit,and some lateritic red soil,red soil and yellow soil with a low weathering degree.Chlorite existed mainly in coastal solonchak and paddy soil developed from marine deposit.1.4nm intergradient mineral appeared frequently in yellow soil,red soil and lateritic red soil.The content of 1.4nm intergradient mineral increased with the decrease of weathering degree from lateritic red soil to red soil to yellow soil.Hydrous micas were more in coastal solonchak,paddy soils derived from marine deposit,lacustrine deposit and river deposit.and puple soil from purple shale than in other soils.Kaolinte was the most important clay mineral in the soils iun this province.The higher the soil weathering degree,the more the kaolinite existed.From yellow soil to red soil to lateritic red soil,kaolinite increased gradually,Kaolinite was the predominant clay mineral accompanied by few other minerals in typical lateritic red soil. Tubular halloysite was a widespread clay mineral in soils of Fujian Province with varying quantities.The soil derived from the paent rocks rich in feldspar contained more tubular halloysite.Spheroidal halloysite was found in a red soil and a paddy soil developed from olivine basalt gibbsite in the soils in this district was largely“primary gibbsite” which formed in the early weathering stage.Gibbsite decreased with the increase of weathering degree from yellow soil to red soil to lateritic red soil.Goethite also decreased in the same sequence while hematite increased.

  17. Electrokinetic removal of heavy metals from soil

    Directory of Open Access Journals (Sweden)

    Puvvadi Venkata Sivapullaiah

    2015-03-01

    Full Text Available Removal of heavy metal ions from soils by electrokinetic treatment has several advantages. The extent of removal, however, is both soil specific and ion specific. The conditions to be maintained have to be established based on laboratory studies. With a view to maximize the removal of metal ions the trends of removal of heavy metal ions such as iron, nickel and cadmium form a natural Indian kaolinitic red earth during different conditions maintained in the electrokinetic extraction process are studied. A laboratory electrokinetic extraction apparatus was assembled for this purpose. Attempts are also made to elucidate the mechanism of removal of the metal ions from soil. The composition of the flushing fluid, voltage and duration of extraction are varied. While dilute acetic acid has been used to neutralize the alkalinity that develops at the cathode, EDTA solution has been used to desorb heavy metals from clay surface. Generally the extent of removal was proportional to the osmotic flow. Nickel and Cadmium are more effectively removed than iron. The percentage removal of Ni is generally proportional to the osmotic flow but shows sensitivity to the pH of the system. There is an optimum voltage for removal of metal ions from soil. The removal of iron was negligible under different conditions studied.

  18. Optimization method for quantitative calculation of clay minerals in soil

    Indian Academy of Sciences (India)

    Libo Hao; Qiaoqiao Wei; Yuyan Zhao; Zilong Lu; Xinyun Zhao

    2015-04-01

    Determination of types and amounts for clay minerals in soil are important in environmental, agricultural, and geological investigations. Many reliable methods have been established to identify clay mineral types. However, no reliable method for quantitative analysis of clay minerals has been established so far. In this study, an attempt was made to propose an optimization method for the quantitative determination of clay minerals in soil based on bulk chemical composition data. The fundamental principles and processes of the calculation are elucidated. Some samples were used for reliability verification of the method and the results prove the simplicity and efficacy of the approach.

  19. Charge Properties and Clay Mineral Composition of Tianbao Mountains Soils

    Institute of Scientific and Technical Information of China (English)

    HEJI-ZHENG; LIXUE-YUAN; 等

    1992-01-01

    The clay mineral association,oxides of clay fraction and surface charge properties of 7 soils,which are developed from granite,located at different altitudesof the Tianbao Mountains were studied.Results indicate that with the increase in altitude,1) the weathering process and desilicification of soil clay minerals became weaker,whereas the leaching depotassication and the formation process of hydroxy-aluminum interlayer got stronger;2)the contents of amorphous and complex aluminum and iron,and the activity of aluminum and iron oxides for soil clay fraction increased;and 3) the amount of variable negarive charge,anion exchange capacity and the values of PZC and PZNC also increased.The activity of aluminum and iron oxides,the accumulation of aluminum,and surface charge characteristics and their relation to clay oxides of the vertical zone soils were observed and recorded.

  20. Measurement and conceptual modelling of herbicide transport to field drains in a heavy clay soil with implications for catchment-scale water quality management.

    Science.gov (United States)

    Tediosi, A; Whelan, M J; Rushton, K R; Thompson, T R E; Gandolfi, C; Pullan, S P

    2012-11-01

    Propyzamide and carbetamide are essential for blackgrass control in oilseed rape production. However, both of these compounds can contaminate surface waters and pose compliance problems for water utilities. The transport of propyzamide and carbetamide to an instrumented field drain in a small clay headwater tributary of the Upper Cherwell catchment was monitored over a winter season. Despite having very different sorption and dissipation properties, both herbicides were transported rapidly to the drain outlet in the first storm event after application, although carbetamide was leached more readily than propyzamide. A simple conceptual model was constructed to represent solute displacement from mobile pore water and preferential flow to drains. The model was able to reproduce the timing and magnitude of herbicide losses well, lending support to its conceptual basis. Measured losses in drainflow in the month following application were 1.1 and 8.1%, respectively, for propyzamide and carbetamide. Differences were due to a combination of differences in herbicide mobility and due to the fact that the monitoring period for carbetamide was hydrologically more active. For both compounds, losses were greater than those typically reported elsewhere for other herbicides. The data suggest that drainflow is the dominant pathway for the transfer of these herbicides to the catchment outlet, where water is abstracted for municipal supply. This imposes considerable constraints on the management options available to reduce surface water concentrations of herbicides in this catchment.

  1. Heavy metals and soil microbes

    NARCIS (Netherlands)

    Giller, K.E.; Witter, E.; McGrath, S.

    2009-01-01

    The discovery in the early 1980s that soil microorganisms, and in particular the symbiotic bacteria Rhizobium, were highly sensitive to heavy metals initiated a new line of research. This has given us important insights into a range of topics: ecotoxicology, bioavailability of heavy metals, the role

  2. Cations extraction of sandy-clay soils from cavado valley, portugal, using sodium salts solutions

    Directory of Open Access Journals (Sweden)

    Silva João Eudes da

    2002-01-01

    Full Text Available Cases of contamination by metals in the water wells of the Cavado Valley in north-west Portugal can be attributed to the heavy leaching of clay soils due to an excess of nitrogen resulting from the intensive use of fertilisers in agricultural areas. This work focuses on the natural weathering characteristics of soils, particularly the clay material, through the study of samples collected near the River Cavado. Samples taken from various sites, after physico-chemical characterisation, were subjected to clay dissolution tests, using sodium salts of different ionic forces, to detect the relationship between certain physico-chemical parameters of water, such as pH, nitrate, chloride and sulphate content, in the dissolution of clay and the subsequent extraction of such cations as Al, Fe and K. In acidic sandy clay soils, the mineralogical composition of which was characterised by a predominance of quartz, micas, kaolinite and K-feldspars, decreases of the clay material/water pH ratio increases dissolution of the micaceous and K-feldspars phases. The presence of nitrates in the aqueous solution apparently advanced the extraction of all three cations Al, Fe and K. The specific surface area of the clay material showed a significant correlation with the main kinetic parameters of cation extraction.

  3. Serbian heavy clays behavior: Application in rough ceramics

    Directory of Open Access Journals (Sweden)

    Arsenović Milica V.

    2013-01-01

    Full Text Available This study is focused on the behavior of five new deposits of heavy clays from Serbia, with the aim to evaluate their potential suitability as raw materials in rough ceramic applications. The Pfefferkorn plasticity coefficient (PC and drying susceptibility using Bigot’s curve were measured for each raw sample. Thermodilatometric analysis (TDA showed the behaviour of dry products during firing. Samples groups were fired in the range of 850°C - 1000°C. Water absorption capacity (WAC and compressive strength (CS were done in order to characterize clays after firing. Linear regression models were used to fit the results. Mathematical tools were used to determine statistical difference of major oxides content, shaping moist and compressive strength of dry laboratory products, using post-hoc Tukey`s HSD test. The chemical and mineralogical compositions of samples do not differ considerably, but their possible application does. All studied clays seem to be easily adaptable to a correct brick making process.

  4. Lability of soil organic carbon in tropical soils with different clay minerals

    DEFF Research Database (Denmark)

    Bruun, Thilde Bech; Elberling, Bo; Christensen, Bent Tolstrup

    2010-01-01

    Soil organic carbon (SOC) storage and turnover is influenced by interactions between organic matter and the mineral soil fraction. However, the influence of clay content and type on SOC turnover rates remains unclear, particularly in tropical soils under natural vegetation. We examined the lability...... of SOC in tropical soils with contrasting clay mineralogy (kaolinite, smectite, allophane and Al-rich chlorite). Soil was sampled from A horizons at six sites in humid tropical areas of Ghana, Malaysian Borneo and the Solomon Islands and separated into fractions above and below 250 µm by wet sieving....... Basal soil respiration rates were determined from bulk soils and soil fractions. Substrate induced respiration rates were determined from soil fractions. SOC lability was significantly influenced by clay mineralogy, but not by clay content when compared across contrasting clay minerals. The lability...

  5. Heavy Metal Runoff in Relation to Soil Characteristics

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Cu,Zn,Pb and Hg runoff from yellow limestone soil and purple soils and the relationships between the mobility of the heavy metals and the soil characteristics were studied in laboratory using a rainfall simulator.The results showed that the concentrations of soluble Zn in surface runoff were significantly negatively correlated with the contents of <0.002 mm particles and CEC of the soils, indicating that Zn was mostly adsorbed by clays in the soils.The contents of Cu and Hg in surface runoff were positively related to their contents in the soils.The amounts of Gu, Zn,Pb and Hg removed by surface runoff were influenced by the amounts of soil and water losses and their contents in the soils,and were closely related to the contents of soil particles 1~0.02 mm in size.

  6. Contact angles at the water-air interface of hydrocarbon-contaminated soils and clay minerals

    Science.gov (United States)

    Sofinskaya, O. A.; Kosterin, A. V.; Kosterina, E. A.

    2016-12-01

    Contact angles at the water-air interface have been measured for triturated preparations of clays and soils in order to assess changes in their hydrophobic properties under the effect of oil hydrocarbons. Tasks have been to determine the dynamics of contact angle under soil wetting conditions and to reveal the effect of chemical removal of organic matter from soils on the hydrophilicity of preparations. The potentialities of static and dynamic drop tests for assessing the hydrophilic-hydrophobic properties of soils have been estimated. Clays (kaolinite, gumbrine, and argillite) have been investigated, as well as plow horizons of soils from the Republic of Tatarstan: heavy loamy leached chernozem, medium loamy dark gray forest soil, and light loamy soddy-calcareous soil. The soils have been contaminated with raw oil and kerosene at rates of 0.1-3 wt %. In the uncontaminated and contaminated chernozem, capillary water capacity has been maintained for 250 days. The contact angles have been found to depend on the degree of dispersion of powdered preparation, the main type of clay minerals in the soil, the presence and amount of oxidation-resistant soil organic matter, and the soil-water contact time. Characteristic parameters of mathematical models for drop behavior on triturated preparations have been calculated. Contamination with hydrocarbons has resulted in a reliable increase in the contact angles of soil preparations. The hydrophobization of soil surface in chernozem is more active than in soils poorer in organic matter. The complete restoration of the hydrophilic properties of soils after hydrocarbon contamination is due to the oxidation of easily oxidizable organic matter at the low content of humus, or to wetting during several months in the absence of the mazut fraction.

  7. Clay dispersability in moist earthworm casts of different soils.

    NARCIS (Netherlands)

    Marinissen, J.C.Y.; Nijhuis, E.; Breemen, van N.

    1996-01-01

    Earthworms were fed soil from two polders, differing in soil age and land use (grass and arable). Sterilised and non-sterilised moist earthworm casts were, directly or after ageing (for 2, 4, 8 and 20 weeks), analysed for clay dispersability and polysaccharide content, either as such, or after treat

  8. Picloram and Aminopyralid Sorption to Soil and Clay Minerals

    Science.gov (United States)

    Aminopyralid sorption data are lacking, and these data are needed to predict off-target transport and plant available herbicide in soil solution. The objective of this research was to determine the sorption of picloram and aminopyralid to five soils and three clay minerals and determine if the pote...

  9. Clay-illuvial soils in the Polish and international soil classifications

    Directory of Open Access Journals (Sweden)

    Kabała Cezary

    2015-12-01

    Full Text Available Soil with a clay-illuvial subsurface horizon are the most widespread soil type in Poland and significantly differ in morphology and properties developed under variable environmental conditions. Despite the long history of investigations, the rules of classification and cartography of clay-illuvial soils have been permanently discussed and modified. The distinction of clay-illuvial soils into three soil types, introduced to the Polish soil classification in 2011, has been criticized as excessively extended, non-coherent with the other parts and rules of the classification, hard to introduce in soil cartography and poorly correlated with the international soil classifications. One type of clay-illuvial soils (“gleby płowe” was justified and recommended to reintroduce in soil classification in Poland, as well as 10 soil subtypes listed in a hierarchical order. The subtypes may be combined if the soil has diagnostic features of more than one soil subtypes. Clear rules of soil name generalization (reduction of subtype number for one soil were suggested for soil cartography on various scales. One of the most important among the distinguished soil sub-types are the “eroded” or “truncated” clay-illuvial soils.

  10. Zinc and copper sorption and fixation by an acid soil clay: effect of selective dissolutions

    Energy Technology Data Exchange (ETDEWEB)

    Cavallaro, N.; McBride, M.B.

    Copper and zinc sorption-desorption studies were carried out over a range of pH values using clay fractions separated from two horizons of an acid soil from New York. In the pH range of high sorption, as much as 95% of the sorbed metal could not be desorbed and thus was considered fixed. Sorption and fixation of Cu and Zn increased rapidly above pH 4 and 5, respectively, for the whole soil clays. Following removal of the oxide fraction by oxalate and citrate-dethionite extractions, sorption and fixation were reduced considerably at pH values below the onset of hydrolysis of the metals in bulk solution. Citrate-dithionite extraction was more effective than oxalate in reducing Zn sorption and fixation. These extraction procedures had less effect on the ability of the clays to sorb and fix Cu. It is concluded that microcrystalline and noncrystalline oxides in the clay fraction of this soil, representing < 20% off the clay by weight, provide reactive surfaces for the chemisorption of Cu and Zn. At low pH, adsorption at these surfaces may be the dominant mechanism of heavy metal immobilization, especially in the subsoil horizons.

  11. Sand and clay mineralogy of sal forest soils of the Doon Siwalik Himalayas

    Indian Academy of Sciences (India)

    Mukesh; R K Manhas; A K Tripathi; A K Raina; M K Gupta; S K Kamboj

    2011-02-01

    The peteromineralogical characterization of the soil was carried out for the 12 soil profiles exposed in the Shorea robusta dominated forests of the Siwalik forest division, Dehradun. The quartz was observed as the dominating light mineral fraction (64–80%) in all the profiles studied. Biotite, hornblende, zircon, tourmaline, rutile and opaques comprising of iron minerals constituted the heavy mineral fraction (20%). The mineralogy of both the sand and clay fractions revealed a mixed mineralogy. The clay minerals in the order of their dominance were vermiculite, illite, kaolinite and mixed layer minerals. The presence of vermiculite and illite in appreciable quantities indicates that these were synthesized from the K-rich soil solution, as orthoclase and micas were present in significant quantities in the sand minerals. The mineral suites identified in the study shows that the geological, climatological and topographical factors of the region collectively played a dominant role in their formation and transformation. After critical appraisal of the results, it may be deduced that the mineralogical composition, physicochemical properties and total elemental analysis of the soils do not show any deficiency of the bases and other plant nutrients in general. The inherent fertility of the soil is good as indicated by the sand and clay mineralogy of the soil and the biotite and feldspar together with the mica is an important source of nutrients for the vegetation in the soils of the Doon valley.

  12. Effect of soil pH on sorption of salinomycin in clay and sandy soils

    African Journals Online (AJOL)

    use

    Full Length Research Paper. Effect of ... In this study, sorption of salinomycin was measured in four agricultural soils, a clay soil with low organic ... Key words: Salinomycin, sorption, pH, desorption, environmental pollution, phosphate buffer.

  13. Water repellency of clay, sand and organic soils in Finland

    Directory of Open Access Journals (Sweden)

    K. RASA

    2008-12-01

    Full Text Available Water repellency (WR delays soil wetting process, increases preferential flow and may give rise to surface runoff and consequent erosion. WR is commonly recognized in the soils of warm and temperate climates. To explore the occurrence of WR in soils in Finland, soil R index was studied on 12 sites of different soil types. The effects of soil management practice, vegetation age, soil moisture and drying temperature on WR were studied by a mini-infiltrometer with samples from depths of 0-5 and 5-10 cm. All studied sites exhibited WR (R index >1.95 at the time of sampling. WR increased as follows: sand (R = 1.8-5.0 < clay (R = 2.4-10.3 < organic (R = 7.9-undefined. At clay and sand, WR was generally higher at the soil surface and at the older sites (14 yr., where organic matter is accumulated. Below 41 vol. % water content these mineral soils were water repellent whereas organic soil exhibited WR even at saturation. These results show that soil WR also reduces water infiltration at the prevalent field moisture regime in the soils of boreal climate. The ageing of vegetation increases WR and on the other hand, cultivation reduces or hinders the development of WR.;

  14. Predicting soil particle density from clay and soil organic matter contents

    DEFF Research Database (Denmark)

    Schjønning, Per; McBride, R.A.; Keller, T.

    2017-01-01

    Soil particle density (Dp) is an important soil property for calculating soil porosity expressions. However, many studies assume a constant value, typically 2.65Mgm−3 for arable, mineral soils. Fewmodels exist for the prediction of Dp from soil organic matter (SOM) content. We hypothesized...... of clay particles was approximately 2.86 Mg m−3, while that of sand+silt particles could be estimated to ~2.65 Mgm−3. Multiple linear regression showed that a combination of clay and SOMcontents could explain nearly 92% of the variation in measured Dp. The clay and SOMprediction equation was validated...... against a combined data set with 227 soil samples representing A, B, and C horizons from temperate North America and Europe. The new prediction equation performed better than two SOM-based models from the literature. Validation of the new clay and SOM model using the 227 soil samples gave a root mean...

  15. "Clay grounds” in Denmark: from soil to canvas

    DEFF Research Database (Denmark)

    Buti, David; Vila, Anna; Haack Christensen, Anne;

    Poster Presentation Abstract: “Clay grounds” in Denmark: from soil to canvas In the framework of the CATS’ project to study the painting technique and materials in Dutch and Danish 17th Century paintings, with a key interest on the materials, techniques and trade of artists’ practice in Denmark...... decorative scheme showed that at least two grounds from those paintings consist mainly of clay mixed with iron and magnesium-containing compounds. Furthermore, both SEM-EDX and µRaman measurements clearly highlighted the presence of a large amount of quartz particles. It is well known that clay is a sheet...... from Rembrandt’s workshop after 1640. Written sources from outside the Netherlands -such as Francisco Pacheco and Pierre Lebrun- mention this practice, also before Rembrandt's time. It was known that clay was cheaper than chalk or earth pigments and it gave more flexibility to the painting support...

  16. Characterization of Colloidal Phosphorus Species in Drainage Waters from a Clay Soil Using Asymmetric Flow Field-Flow Fractionation

    NARCIS (Netherlands)

    Regelink, I.C.; Koopmans, G.F.; Salm, van der C.; Weng, L.P.; Riemsdijk, van W.H.

    2013-01-01

    Phosphorus transport from agricultural land contributes to eutrophication of surface waters. Pipe drain and trench waters from a grassland field on a heavy clay soil in the Netherlands were sampled before and after manure application. Phosphorus speciation was analyzed by physicochemical P

  17. Modeling of Heavy Metal Transformation in Soil Ecosystem

    Science.gov (United States)

    Kalinichenko, Kira; Nikovskaya, Galina N.

    2017-04-01

    The intensification of industrial activity leads to an increase in heavy metals pollution of soils. In our opinion, sludge from biological treatment of municipal waste water, stabilized under aerobic-anaerobic conditions (commonly known as biosolid), may be considered as concentrate of natural soil. In their chemical, physical and chemical and biological properties these systems are similar gel-like nanocomposites. These contain microorganisms, humic substances, clay, clusters of nanoparticles of heavy metal compounds, and so on involved into heteropolysaccharides matrix. It is known that microorganisms play an important role in the transformation of different nature substances in soil and its health maintenance. The regularities of transformation of heavy metal compounds in soil ecosystem were studied at the model of biosolid. At biosolid swelling its structure changing (gel-sol transition, weakening of coagulation contacts between metal containing nanoparticles, microbial cells and metabolites, loosening and even destroying of the nanocomposite structure) can occur [1, 2]. The promotion of the sludge heterotrophic microbial activities leads to solubilization of heavy metal compounds in the system. The microbiological process can be realized in alcaligeneous or acidogeneous regimes in dependence on the type of carbon source and followed by the synthesis of metabolites with the properties of flocculants and heavy metals extragents [3]. In this case the heavy metals solubilization (bioleaching) in the form of nanoparticles of hydroxycarbonate complexes or water soluble complexes with oxycarbonic acids is observed. Under the action of biosolid microorganisms the heavy metals-oxycarbonic acids complexes can be transformed (catabolised) into nano-sizing heavy metals- hydroxycarbonates complexes. These ecologically friendly complexes and microbial heteropolysaccharides are able to interact with soil colloids, stay in the top soil profile, and improve soil structure due

  18. Heavy Metal Diffusion through Soft Clay under High Hydraulic Gradients

    Directory of Open Access Journals (Sweden)

    Zaheer Ahmed Almani

    2013-04-01

    Full Text Available This study was focused on the determination of contaminant transport parameters of heavy metal Zinc moving through saturated soft Bangkok undisturbed clay under high hydraulic gradients. These parameters were compared with contaminant transport determined under concentration gradient alone (pure diffusion. In total fifteen column tests were conducted and a mathematical model was applied to determine the coefficients. Two different source concentrations conditions, constant and decreasing, were applied. Testing periods were ranged from 15-60 days while hydraulic gradients were ranged from 0-500. The curves between relative concentration and time and pore volume were developed for the constant source condition whereas curves between source reservoirs concentrations and time were developed for decreasing source condition. The effective diffusion and distribution coefficients, De and Kd, were determined by curve fitting using the computer code POLLUTE v 6.3. The results showed that diffusion coefficient increases and distribution coefficient decreases as hydraulic gradient increases from 0 to high value of 500 due to contribution of dispersion and additional molecular diffusion at high advective velocity. Thus, testing at high gradients ensures the safe performance of earthen barriers under worse conditions.

  19. [Analysis of XRD spectral characteristics of soil clay mineral in two typical cultivated soils].

    Science.gov (United States)

    Zhang, Zhi-Dan; Luo, Xiang-Li; Jiang, Hai-Chao; Li, Qiao; Shen, Cong-Ying; Liu, Hang; Zhou, Ya-Juan; Zhao, Lan-Po; Wang, Ji-Hong

    2014-07-01

    The present paper took black soil and chernozem, the typical cultivated soil in major grain producing area of Northeast, as the study object, and determinated the soil particle composition characteristics of two cultivated soils under the same climate and location. Then XRD was used to study the composition and difference of clay mineral in two kinds of soil and the evolutionary mechanism was explored. The results showed that the two kinds of soil particles were composed mainly of the sand, followed by clay and silt. When the particle accumulation rate reached 50%, the central particle size was in the 15-130 microm interval. Except for black soil profile of Shengli Xiang, the content of clay showed converse sequence to the central particle in two soils. Clay accumulated under upper layer (18.82%) in black soil profile while under caliche layer (17.41%) in chernozem profile. Clay content was the least in parent material horizon except in black profile of Quanyanling. Analysis of clay XRD atlas showed that the difference lied in not only the strength of diffraction peak, but also in the mineral composition. The main contents of black soil and chernozem were both 2 : 1 clay, the composition of black soil was smectite/illite mixed layer-illite-vermiculite and that of chernozem was S/I mixture-illite-montmorillonite, and both of them contained little kaolinite, chlorite, quartz and other primary mineral. This paper used XRD to determine the characteristics of clay minerals comprehensively, and analyzed two kinds of typical cultivated soil comparatively, and it was a new perspective of soil minerals study.

  20. Pesticide leaching in macroporous clay soils: field experiment and modeling

    NARCIS (Netherlands)

    Scorza Júnior, R.P.

    2002-01-01

    Keywords : pesticide leaching, macropores, preferential flow, preferential transport, cracked clay soil, pesticide leaching models, groundwater contamination, inverse modeling, bentazone and imidacloprid. The presence of macropores (i.e. shrinkage c

  1. THE CLAY CONTENT EFFECT ON THE FORMATION OF SHALLOW MOLE DRAINAGE AND THE RATE OF LOWERING SOIL MOISTURE CONTENT

    Directory of Open Access Journals (Sweden)

    Siti Suharyatun

    2014-10-01

    loam soil did not infl uence the rate of lowering soil moisture content. Contrary, the mole drainage installed in clay soil has effected to increase the rate of lowering soil moisture content. Keywords: Mole drainage, soil moisture content, clay content

  2. Reversibility of soil forming clay mineral reactions induced by plant - clay interactions

    Science.gov (United States)

    Barré, P.; Velde, B.

    2012-04-01

    Recent data based upon observations of field experiments and laboratory experiments suggest that changes in phyllosilicate mineralogy, as seen by X-ray diffraction analysis, which is induced by plant action can be reversed in relatively short periods of time. Changes from diagenetic or metamorphic mineral structures (illite and chlorite) to those found in soils (mixed layered minerals in the smectite, hydroxy-interlayer mineral and illites) observed in Delaware Bay salt marsh sediments in periods of tens of years and observed under different biologic (mycorhize) actions in coniferous forests in the soil environment can be found to be reversed under other natural conditions. Reversal of this process (chloritisation of smectitic minerals in soils) has been observed in natural situations over a period of just 14 years under sequoia gigantia. Formation of smectite minerals from illite (potassic mica-like minerals) has been observed to occur under intensive agriculture conditions over periods of 80 years or so under intensive zea mais production. Laboratory experiments using rye grass show that this same process can be accomplished to a somewhat lesser extent after one growing season. However experiments using alfalfa for 30 year growing periods show that much of the illite content of a soil can be reconstituted or even increased. Observations on experiments using zea mais under various fertilizer and mycorhize treatments indicate that within a single growing season potassium can be extracted from the clay (illite layers) but at the end of the season the potassium can be restored to the clay structures and more replaced that extracted. Hence it is clear that the change in clay mineralogy normally considered to be irreversible, illite to smectite or chlorite to smectite observed in soils, is a reversible process where plant systems control the soil chemistry and the soil mineralogy. The changes in clay mineralogy concern mostly the chemical composition of the interlayer

  3. Clay content evaluation in soils through GPR signal processing

    Science.gov (United States)

    Tosti, Fabio; Patriarca, Claudio; Slob, Evert; Benedetto, Andrea; Lambot, Sébastien

    2013-10-01

    The mechanical behavior of soils is partly affected by their clay content, which arises some important issues in many fields of employment, such as civil and environmental engineering, geology, and agriculture. This work focuses on pavement engineering, although the method applies to other fields of interest. Clay content in bearing courses of road pavement frequently causes damages and defects (e.g., cracks, deformations, and ruts). Therefore, the road safety and operability decreases, directly affecting the increase of expected accidents. In this study, different ground-penetrating radar (GPR) methods and techniques were used to non-destructively investigate the clay content in sub-asphalt compacted soils. Experimental layout provided the use of typical road materials, employed for road bearing courses construction. Three types of soils classified by the American Association of State Highway and Transportation Officials (AASHTO) as A1, A2, and A3 were used and adequately compacted in electrically and hydraulically isolated test boxes. Percentages of bentonite clay were gradually added, ranging from 2% to 25% by weight. Analyses were carried out for each clay content using two different GPR instruments. A pulse radar with ground-coupled antennae at 500 MHz centre frequency and a vector network analyzer spanning the 1-3 GHz frequency range were used. Signals were processed in both time and frequency domains, and the consistency of results was validated by the Rayleigh scattering method, the full-waveform inversion, and the signal picking techniques. Promising results were obtained for the detection of clay content affecting the bearing capacity of sub-asphalt layers.

  4. Remediation of heavy metal contaminated soil | Nanda |

    African Journals Online (AJOL)

    Remediation of heavy metal contaminated soil. ... in intensive research aiming at understanding metal interactions in soil and their removal in an efficient way. ... This paper investigates the plant-microbial interactions in reclaiming the metal ...

  5. Biosolids and heavy metals in soils

    Directory of Open Access Journals (Sweden)

    Silveira Maria Lucia Azevedo

    2003-01-01

    Full Text Available The application of sewage sludge or biosolids on soils has been widespread in agricultural areas. However, depending on their characteristics, they may cause increase in heavy metal concentration of treated soils. In general, domestic biosolids have lower heavy metal contents than industrial ones. Origin and treatment method of biosolids may markedly influence their characteristics. The legislation that controls the levels of heavy metal contents in biosolids and the maximum concentrations in soils is still controversial. In the long-term, heavy metal behavior after the and of biosolid application is still unknown. In soils, heavy metals may be adsorbed via specific or non-specific adsorption reactions. Iron oxides and organic matter are the most important soil constituents retaining heavy metals. The pH, CEC and the presence of competing ions also affect heavy metal adsorption and speciation in soils. In solution, heavy metals can be present either as free-ions or complexed with organic and inorganic ligands. Generally, free-ions are more relevant in environmental pollution studies since they are readily bioavailable. Some computer models can estimate heavy metal activity in solution and their ionic speciation. Thermodynamic data (thermodynamic stability constant, total metal and ligand concentrations are used by the GEOCHEM-PC program. This program allows studying heavy metal behavior in solution and the effect of changes in the conditions, such as pH and ionic strength and the application of organic and inorganic ligands caused by soil fertilization.

  6. Determination of the composition of the organic matter chemically stabilized by agricultural soil clay minerals: Spectroscopy and Density Fractionation

    Science.gov (United States)

    Oufqir, Sofia; Bloom, Paul; Toner, Brandy; Hatcher, Patrick

    2014-05-01

    The interactions between soil organic matter and clay minerals are considered important processes because of their ability to sequester C in soil for long periods of time, and hence control C in the global C cycle when present. However, differing results have been reported regarding the composition of the soil organic matter - aromatic fractions versus aliphatic fractions - associated with clay minerals. To clarify this critical issue and better understand the C sequestration process in soils, we aimed to determine the nature of the chemically bound natural organic matter on clay surfaces, and to probe the speciation and spatial distribution of C in the soil clay nanoparticles using direct spectroscopic measurements namely solid-state CP-MAS and DP-MAS 13C NMR spectroscopy, x-ray diffraction spectroscopy (XRD), and scanning transmission x-ray microscopy (STXM). We tested the hypotheses that peptides and polysaccharides are stabilized by the smectite-illite clay while the lipids and black carbon are a separate phase; and that they are evenly distributed on clay surfaces. A soil clay fraction (5.5% organic C) was isolated from the surface of a prairie soil (Mollisol) in southwestern Minnesota, characterized by a pH 6.0, 32.5% clay content, and 3.7% organic carbon, using a sonication-sedimentation-siphoning process in distilled water. Then was subjected to density separation combined with low energy ultrasonic dispersion to separate the free organic and black C (light fraction) from the chemically bound C (heavy fraction). The XRD results indicated a dominance of interstratified smectite-illite clays in soil. The 13C-NMR spectra of the soil clay fraction suggested that polysaccharides and polypeptides are the prevailing components of the organic matter associated with the mineral clay, with only a minor component of aromatic C. The light fraction has strong alkyl C-H bands characteristic of fatty acids plus strong C-O bands characteristic of polysaccharides, including

  7. Characterisation of the wall-slip during extrusion of heavy-clay products

    Science.gov (United States)

    Kocserha, I.; Gömze, A. L.; Kulkov, S.; Kalatur, E.; Buyakova, S. P.; Géber, R.; Buzimov, A. Y.

    2017-01-01

    During extrusion through the extrusion die, heavy-clay compounds are usually show plug flow with extensive slip at the wall of the die. In this study, the viscosity and the thickness of the slip layer were investigated. For the examination a brick-clay from Malyi (Hungary) deposit was applied as a raw material. The clay was characterised by XRPD, BET, SEM and granulometry. As the slip layer consists of suspension of the fine clay fraction so the clay minerals content of the clay (dwater content was measured by means of rotational viscosimeter. The thickness of the slip layer was calculated from the measured viscosity and other data obtained from an earlier study with capillary rheometer. The calculated thickness value showed a tendency to reach a limit value by increasing the extrusion speed.

  8. Rheological properties of different minerals and clay soils

    Directory of Open Access Journals (Sweden)

    Dolgor Khaydapova

    2015-07-01

    Full Text Available Rheological properties of kaolinite, montmorillonite, ferralitic soil of the humid subtropics (Norfolk island, southwest of Oceania, alluvial clay soil of arid subtropics (Konyaprovince, Turkey and carbonate loess loam of Russian forest-steppe zone were determined. A parallel plate rheometer MCR-302 (Anton Paar, Austria was used in order to conduct amplitude sweep test. Rheological properties allow to assess quantitatively structural bonds and estimate structural resistance to a mechanical impact. Measurements were carried out on samples previously pounded and capillary humidified during 24 hours. In the amplitude sweep method an analyzed sample was placed between two plates. The upper plate makes oscillating motions with gradually extending amplitude. Software of the device allows to receive several rheological parameters such as elastic modulus (G’, Pa, viscosity modulus (G", Pa, linear viscoelasticity range (G’>>G”, and point of destruction of structure at which the elastic modulus becomes equal to the viscosity modulus (G’=G”- crossover. It was found out that in the elastic behavior at G '>> G " strength of structural links of kaolinite, alluvial clay soil and loess loam constituted one order of 105 Pa. Montmorillonit had a minimum strength - 104 Pa and ferrallitic soil of Norfolk island [has] - a maximum one -106 Pa. At the same time montmorillonite and ferralitic soil were characterized by the greatest plasticity. Destruction of their structure (G '= G" took place only in the cases when strain was reaching 11-12%. Destraction of the kaolinite structure happened at 5% of deformation and of the alluvial clay soil and loess loam - at 4.5%.

  9. IMPACT OF POLLUTION ON THE CLAY MINERALOGICAL COMPOSITION OF SOME SOILS FROM ZLATNA AREA (ROMANIA

    Directory of Open Access Journals (Sweden)

    C. Craciun

    2008-10-01

    Full Text Available Zlatna area is a high polluted zone with heavy metals due to industrial activity (extraction and processing of non-ferrous area. In spite of the fact that industrial activity was stoped for 2-3 years, the effect of pollution are still obvious. The aim of this paper is to make evident some aspects concerning the impact of pollution on the mineralogical composition of the clay fraction (below 2μ from some soils belonging to dystric cambisol and luvisol type. From the chemical point of view, the effect of pollution is the acidifiation and depletion of bases, reflected by the decrease of values of indices which express soil reaction (pH and soil exchange properties, especially in the surface horizon. From mineralogical point of view, the acidifiation determines a strong alteration of primary minerals (micas and feldspars and just of secondary minerals (illite, evolution beeing towards hydroxy interlayered minerals (intergrade and kaolinite. As result of this alteration the content of kaolinite increases, achiving a double content in the surface horizon of some polluted soils. Sometimes kaolinite becomes the dominant mineral in the clay fraction of some strong polluted soil.

  10. Diffusion of inorganic chemical species in compacted clay soil

    Science.gov (United States)

    Shackelford, Charles D.; Daniel, David E.; Liljestrand, Howard M.

    1989-08-01

    This research was conducted to study the diffusion of inorganic chemicals in compacted clay soil for the design of waste containment barriers. The effective diffusion coefficients ( D ∗) of anionic (Cl -, Br -, and I -) and cationic (K +, Cd 2+, and Zn 2+) species in a synthetic leachate were measured. Two clay soils were used in the study. The soils were compacted and pre-soaked to minimize mass transport due to suction in the soil. The results of the diffusion tests were analyzed using two analytical solutions to Fick's second law and a commercially available semi-analytical solution, POLLUTE 3.3. Mass balance calculations were performed to indicate possible sinks/sources in the diffusion system. Errors in mass balance were attributed to problems with the chemical analysis (I -), the inefficiency of the extraction procedure (K +), precipitation (Cd 2+ and Zn 2+), and chemical complexation (Cl - and Br -). The D ∗ values for Cl - reported in this study are in excellent agreement with previous findings for other types of soil. The D ∗ values for the metals (K +, Cd 2+, and Zn 2+) are thought to be high (conservative) due to: (1) Ca 2+ saturation of the exchange complex of the clays; (2) precipitation of Cd 2+ and Zn 2+; and (3) nonlinear adsorption behavior. In general, high D ∗ values and conservative designs of waste containment barriers will result if the procedures described in this study are used to determine D ∗ and the adsorption behavior of the solutes is similar to that described in this study.

  11. A Preliminary Study on Identification of Clay Minerals in Soils with Reference to Reflectance Spectra

    Institute of Scientific and Technical Information of China (English)

    XUBIN-BIN; LIDE-CHENG; 等

    1995-01-01

    The characteristics of the reflectance spectra of clay minerals and their influences on the reflectance spectra of soils are dealt with in the paper.The results showed that dominant clay minerals in soils could be distinguished in light of the spectral -form parameters of the reflectance spectra of soils,thus making it possible to develop a quick method to determine clay minerals by means of reflectance spectra of soils in the lab.and providing a theoretic basis for remote sensing of clay minerals in soils with a high resolution imaging spectrometer.

  12. Combined Heavy Metal Pollution in Red Soil

    Institute of Scientific and Technical Information of China (English)

    CHENHUAIMAN; ZHENGCHNURONG

    1996-01-01

    The effects of combined heavy metal pollution of red soil on the growth of wetland rice and the transfer of Pb,Cd,Cu and Zn from soil into plants were sudied by greenhouse pot experiment,The results showed that the plantyields were markedly affected by heavy metals,with the exception of Pb,in soils under the experimental conditions,without taking into consideration all the interactions among the elements.The concentrations of the elemets in plants were mainly affected by the specific element added to the soil.The effect of interactions among the heavy metals was very significant either on plant yields or on the concentration of the elements in plants.The risk assessment of a combined pollution by heavy metals in the soil is discussed preliminarily in terms of the relative pollution equivalent.

  13. Clay minerals, metallic oxides and oxy-hydroxides and soil organic carbon distribution within soil aggregates in temperate forest soils

    Science.gov (United States)

    Gartzia-Bengoetxea, Nahia; Fernández-Ugalde, Oihane; Virto, Iñigo; Arias-González, Ander

    2017-04-01

    Soil mineralogy is of primary importance for key environmental services provided by soils like carbon sequestration. However, current knowledge on the effects of clay mineralogy on soil organic carbon (SOC) stabilization is based on limited and conflicting data. In this study, we investigated the relationship between clay minerals, metallic oxides and oxy-hydroxides and SOC distribution within soil aggregates in mature Pinus radiata D.Don forest plantations. Nine forest stands located in the same geographical area of the Basque Country (North of Spain) were selected. These stands were planted on different parent material (3 on each of the following: sandstone, basalt and trachyte). There were no significant differences in climate and forest management among them. Moreover, soils under these plantations presented similar content of clay particles. We determined bulk SOC storage, clay mineralogy, the content of Fe-Si-Al-oxides and oxyhydroxides and the distribution of organic C in different soil aggregate sizes at different soil depths (0-5 cm and 5-20 cm). The relationship between SOC and abiotic factors was investigated using a factor analysis (PCA) followed by stepwise regression analysis. Soils developed on sandstone showed significantly lower concentration of SOC (29 g C kg-1) than soils developed on basalts (97 g C kg-1) and trachytes (119 g C kg-1). The soils on sandstone presented a mixed clay mineralogy dominated by illite, with lesser amounts of hydroxivermiculite, hydrobiotite and kaolinite, and a total absence of interstratified chlorite/vermiculite. In contrast, the major crystalline clay mineral identified in the soils developed on volcanic rocks was interstratified chlorite/vermiculite. Nevertheless, no major differences were observed between basaltic and trachytic soils in the clay mineralogy. The selective extraction of Fe showed that the oxalate extractable iron was significantly lower in soils on sandstone (3.7%) than on basalts (11.2%) and

  14. Behaviour of heavy metals in soils

    NARCIS (Netherlands)

    Harmsen, K.

    1977-01-01

    Fractions of Zn, Cd, Cu, Pb, Fe and Mn extractable with water, a salt solution and dilute acid, and residual fractions were determined in soils with raised contents of heavy metals, near zinc smelters, along a river formerly discharging heavy metals, and in a sewage farm. Special attention was paid

  15. Sorption of Heavy Metal and Organic Pollutants on Modified Soils

    Institute of Scientific and Technical Information of China (English)

    MENG Zhao-Fu; ZHANG Yi-Ping; WANG Guo-Dong

    2007-01-01

    Sorption characteristics of both an organic pollutant(phenol)and a heavy metal(cadmium ion)on the clay layer of a Lou soil(Eum-orthic Anthrosol in Chinese Soil Taxonomy)along with the sorption mechanism were investigated using three soil treatments:modification with a cationic surfactant cetyltrimethylammonium bromide added at an amount equivalent to 50%and 100%of the soil CEC (50%CB and 100%CB),modification with an amphoteric surface-modifying agent dodecyldimethylbetaine(commercially known as BS-12)added at an amount equivalent to 50%and 100%of the soil CEC(50%BS and 100%BS),and an unmodified control(CK).Results showed that the BS soil treatments increased sorption of both the heavy metal Cd2+ and the organic pollutant phenol.The equilibrium sorption amount of Cd2+decreased in the order:50%BS>100%BS>CK>50%CB>100%CB,with the BS soil treatments being about 1.3 to 1.8 times higher and the CB soil treatments about 23%to 41%lower than CK.Both the single-site and two-site Langmuir models could be applied to describe the sorption of Cd2+ in each soil treatment.The equilibrium sorption amount of phenol on the soil samples decreased in the order:100%CB>50%CB>100%BS>50%BS>CK,with the CB soil treatments being 41.0 to 79.6 times higher and the BS soil treatments 4.0 to 8.3 times higher than CK.The Freundlich equation could also be used to describe the sorption characteristics of phenol.In the BS soil treatments,both an organophobic long carbon chain and hydrophilic charged groups resulted in a relatively strong sorption ability for both heavy metals and organic pollutants.In addition.the sorption ratio K,the ratio of phenol sorption amount of the modified soil to that of CK,increased initially and decreased later with the amount of phenol added,and the critical sorption ratio Kc,the peak value of the sorption ratio curve plotted against the added phenol concentration.was a good index for evaluating the sorption ability of phenol in the soil.

  16. Rapid Soil Stabilization of Soft Clay Soils for Contingency Airfields

    Science.gov (United States)

    2006-12-01

    LiquiBlock 40K and 41K are both potassium salts of crosslinked polyacrylic acids/ polyacrylamide copolymers in granular form that also gel in the presence...with the soil water and cure. Unlike strength loss due to the fibers bunching, adding the cement on the second day only results in a reduction of the...the method of treatment, which Maclean (1956) has found to have significantly different correlated CBR and UCS values, where soils with higher friction

  17. Physical and water properties of selected Polish heavy soils of various origins

    Directory of Open Access Journals (Sweden)

    Kaczmarek Zbigniew

    2015-12-01

    Full Text Available The paper presents the characteristics of selected physical, chemical, and water properties of four mineral arable soils characterized with heavy and very heavy texture. Soil samples from genetic horizons of black earths from areas near Kętrzyn, Gniew and Kujawy, and alluvial soils from Żuławy were used. The following properties were determined in the samples of undisturbed and disturbed structure: texture, particle density, bulk density, porosity, natural and hygroscopic moistures, maximal hygroscopic capacity, saturated hydraulic conductivity, potential of water bonding in soil, total and readily available water, total retention in the horizon of 0–50 cm, drainage porosity, content of organic carbon and total nitrogen Parent rocks of these soils were clays, silts and loams of various origin. High content of clay fraction strongly influenced the values of all the analyzed properties. All the examined soils had high content of organic carbon and total nitrogen and reaction close to neutral or alkaline. High content of mineral and organic colloids and, what follows, beneficial state of top horizons’ structure, determined – apart from heavy texture – low soil bulk density and high porosity. The investigated soils were characterized by high field water capacity and wide scopes of total and readily available water. The saturated hydraulic conductivity was low and characteristic to heavy mineral arable soils. The parameter which influenced the variability of analyzed parameters most was texture.

  18. Microbial Decomposition of Extracellular DNA in Clay Soils

    Science.gov (United States)

    Morrissey, E. M.; McHugh, T. A.; Schwartz, E.; Preteska, L.; Hayer, M.; Hungate, B. A.

    2014-12-01

    Genomic analysis of soil communities can only be useful in predicting ecosystem processes if the genetic data gathered is representative of the microbial community. Consequently, extracellular DNA (eDNA) represents a pool of unexpressed genetic information that may skew genomic analyses. To date, our understanding of the representation of eDNA in metagenomic data and its decomposition in soil is very limited. To address this deficit, we performed a laboratory experiment wherein soils were amended with eDNA and/or clay minerals in a full factorial design. Specifically, the decomposition of 13C labeled E. coli DNA was monitored over a 30-day period in control, Kaolinite-amended, and Montmorillonite-amended soils. The amount of added eDNA carbon (C) remaining in the soil declined exponentially over time, with the majority of decomposition occurring in the first two weeks. Kaolinite significantly decreased eDNA decomposition rates and retained a higher fraction of eDNA-C (~70% remaining) than unamended and Montmorillonite-soils (~40% remaining) after 30 days. Phylogenetic (16S rRNA) sequencing of DNA extracted over the course of the incubation period enabled detection of the added eDNA. The relative abundance of added E. coli DNA decreased ~10-100 fold over 30 days. These results indicate that while a significant fraction of eDNA-C remained in the soil, this carbon was likely no longer in the form of intact strands of DNA amenable to sequencing. In addition, the eDNA affected the composition of the bacterial community. Specifically, the relative abundance of Planctomycetes and TM7 were elevated in soils that received eDNA regardless of clay addition, suggesting these phyla may be particularly effective at degrading eDNA and using it for growth. In conclusion these results indicate that the representation of eDNA in metagenomic sequence data declines rapidly, likely due to fragmentation. However, a fraction of eDNA material was resistant to decomposition, suggesting a

  19. Pillared clays as catalysts for hydrocracking of heavy liquid fuels

    Energy Technology Data Exchange (ETDEWEB)

    Gyftopoulou, M.E.; Bridgwater, A.V. [Bio-Energy Research Group, Chemical Engineering and Applied Chemistry, School of Engineering and Applied Science, Aston University, Birmingham B4 7ET (United Kingdom); Millan, M.; Dugwell, D.; Kandiyoti, R. [Department of Chemical Engineering and Chemical Technology Imperial College London, London SW7 2BY (United Kingdom); Hriljac, J.A. [School of Chemistry, University of Birmingham, Edgbaston, Birmingham B15 2TT (United Kingdom)

    2005-03-30

    Two sets of pillared clays (PILCs), chromia and tin-oxide-pillared montmorillonites and laponites, were successfully prepared at Aston University using both conventional and microwave-assisted methods and characterised by X-ray diffraction and thermogravimetric analysis. Microwave irradiation enabled the preparation of the PILCs in a fraction of time of the conventional methods. X-ray powder diffraction was not a suitable method for characterizing laponite or pillared laponites due to the lack of first order reflections attributed to the small size of individual particles and the random rather than uniform face-to-face orientation of the clay platelets. Laponite appeared to be more thermally stable than montmorillonite. For pillared montmorillonites, dehydroxylation shifted to a lower temperature compared to the starting materials, whereas for tin-oxide-pillared laponites such a shift did not occur. On the other hand for chromia laponite dehydroxylation took place over a much wider temperature range compared to all other materials. The prepared PILCs were employed as catalysts in the hydrocracking of coal-derived liquids in a conventional microbomb reactor at Imperial College exhibiting high-quality performance and remaining active after 4h utilization regardless of high coke deposition. They actually showed an increase in the total conversion when reused.

  20. Electrodialytic decontamination of heavy metal polluted soil

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Hansen, Henrik K.; Karlsmose, Bodil

    1996-01-01

    Electrodialytic remediation of heavy metal polluted soil is a newly developed method, which combines the electrokinetic mevement of ions in soil with the principle of electrodialytis. The method has been proven to work in laboratory scale and at present two types of pilot plant tests are made....

  1. Distribution, bioavailability, and leachability of heavy metals in soil particle size fractions of urban soils (northeastern China).

    Science.gov (United States)

    Yutong, Zong; Qing, Xiao; Shenggao, Lu

    2016-07-01

    This study examines the distribution, mobility, and potential environmental risks of heavy metals in various particle size fractions of urban soils. Representative urban topsoils (ten) collected from Anshan, Liaoning (northeastern China), were separated into six particle size fractions and their heavy metal contents (Cr, Cu, Cd, Pb, and Zn) were determined. The bioaccessibility and leachability of heavy metals in particle size fractions were evaluated using the toxicity characteristic leaching procedure (TCLP) and ethylenediaminetetraacetic acid (EDTA) extraction, respectively. The results indicated that the contents of five heavy metals (Cd, Cr, Cu, Pb and Zn) in the size fractions increased with the decrease of particle size. The clay fraction of fraction was polluted by heavy metals more seriously than the other size fractions in urban topsoils. Cr also concentrated in the coarse fraction of 2000-1000 μm, indicating a lithogenic contribution. However, the dominant size fraction responsible for heavy metal accumulation appeared to belong to particle fraction of 50-2 μm. The lowest distribution factors (DFs) of heavy metals were recorded in the 2000- to 1000-μm size fraction, while the highest in the clay fraction. The DFs of heavy metals in the clay fraction followed Zn (3.22) > Cu (2.84) > Pb (2.61) > Cr (2.19) > Cd (2.05). The enrichment factor suggested that the enrichment degree of heavy metal increased with the decrease of the particle size, especially for Cd and Zn. The TCLP- and EDTA-extractable concentrations of heavy metals in the clay fraction were relatively higher than those in coarse particles. Cd bioavailability was higher in the clay fraction than in other fractions or whole soils. In contrast, Cr exhibits similar bioaccessibilities in the six size fractions of soils. The results suggested that fine particles were the main sources of potentially toxic metals in urban soils. The variation of heavy metals in various size fractions

  2. Influence of some soil parameters on heavy metals accumulation by vegetables grown in agricultural soils of different soil orders.

    Science.gov (United States)

    Golia, E E; Dimirkou, A; Mitsios, I K

    2008-07-01

    The main purpose of this research was to determine the levels of heavy metals in tomato, potato and lettuce, grown in agricultural soils of different soil orders (Alfisols, Endisols and Vertisols), located at Central Greece. Soil samples were analysed for available forms (after extraction with DTPA) and for total concentrations (after digestion with Aqua Regia) of metals. Zn, Cu, Cr and Ni were the common metals detected in the vegetables studied. Pb and Cd concentrations were low and in some cases not detectable. Significant correlations among metals concentrations and soil physicochemical parameters were obtained and discussed. The pH value and the percentage of clay content were found to determine the solubility of metals in the soil and their availability for uptake by plants.

  3. Electrodialytic remediation of heavy metal polluted soil

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Jensen, Pernille Erland; Kirkelund, Gunvor Marie;

    2012-01-01

    Electrodialytic soil remediation is a method for removal of heavy metals. Good results have previously been obtained with both treatment of a stationary, water saturated soil matrix and with remediation of a stirred suspension of soil in water. The two different setups have different uses...... without a short distance between the membranes. The acidification of the suspended soil was fastest and following the mobilization of heavy metals. This may indicate that water splitting at the anion exchange membrane is used more efficiently in the stirred setup........ The first as in-situ or on-site treatment when there is no requirement for fast remediation, as the removal rate of the heavy metals are dependent on the distance between the electrodes (everything else equal) and in such application the electrode spacing must have a certain distance (often meters...

  4. Clay slurry and engineered soils as containment technologies for remediation of contaminated sites

    Energy Technology Data Exchange (ETDEWEB)

    Williams, J.R. [Reclamation Technology, Inc., Athens, GA (United States); Dudka, S.; Miller, W.P. [Univ. of Georgia, Athens, GA (United States); Johnson, D.O. [Argonne National Lab., IL (United States)

    1997-12-31

    Clay Slurry and Engineered Soils are containment technologies for remediation of waste disposal sites where leaching, groundwater plumes and surface runoff of contaminants are serious ecological hazards to adjacent environments. This technology is a patent-pending process which involves the use of conditioned clay materials mixed with sand and water to form a readily pourable suspension, a clay slurry, which is either placed into a trench barrier system or allowed to de-water to create Engineered Soils. The Engineered Soil forms a layer impervious to water and air, therefore by inhibiting both water and oxygen from penetrating through the soil the material. This material can be installed in layers and as a vertical barrier to create a surface barrier containment system. The clay percentage in the clay slurry and Engineered Soils varies depending on site characteristics and desired performance standards. For example Engineered Soils with 1-2% of clay (dry wt.) had a hydraulic conductivity (K) of 10{sup -8} to 10{sup -1} cm/sec. Tests of tailing materials from a kyanite and pyrite mine showed that the clay slurry was effective not only in reducing the permeability of the treated tailings, but also in decreasing their acidity due to the inherent alkalinity of the clay. The untreated tailings had pH values in the range of 2.4 - 3.1; whereas, the effluent from clay and tailings mixtures had pH values in a slightly alkaline range (7.7-7.9). Pug-mills and high volume slurry pumps can be readily adapted for use in constructing and placing caps and creating Engineered Soils. Moreover, material on site or from a local sand supply can be used to create clay slurries and engineered soils. Clay materials used in cap construction are likewise readily available commercially. As a result, the clay slurry system is very cost effective compared to other capping systems, including the commonly used High Density Polyethylene (HDPE) liner systems.

  5. Effect of Clay Content and Soil-water Potential On Mobilization and Leaching of Colloids In Unsaturated Macroporous Soil

    Science.gov (United States)

    Kjaergaard, C.; de Jonge, L. W.; Moldrup, P.

    The transport of strongly sorbed environmental contaminants may be enhanced due to sorption to mobile soil colloids. The most common source of mobile colloids in soil is the in-situ release of water-dispersible colloids (WDC), however experimental investigations of colloid mobilization in unsaturated macroporous soil are scarce. An understanding of the arrangement of colloids in aggregates, and the influence of clay on the development of the soil fabric and pore-size distributions is essential for the in- terpretation of colloid mobilization in soils. This emphasizes the important role of clay content, when evaluating the susceptibility of soils to release colloids and associated contaminants. This study was conducted to determine the effect of clay content and initial soil- water potential on colloid mobilization and leaching. Intact soil cores were sampled from an arable field at six locations along a naturally occurring texture gradient. Soil dispersibility was investigated using capillary saturation and drainage of field-moist packed aggregates. The amount of WDC in the soil was measured for each com- bination of clay content and initial soil-water potential (-2.5, -98 and -15530 hPa). Mobilization and leaching of colloids was investigated from unsaturated intact soil cores. The soils were irrigated at low intensity (1 mm/h), and effluent sampling was conducted at 5 cm tension. The results showed that colloid dispersion was significantly affected by both clay con- tent and initial soil-water potential. With a soil-water potential of -15530 hPa the col- loid release was generally low and no variation occurred between the soils. With in- creasing soil-water potential there was an increase in the amount of WDC for all soils. The increase in WDC was negatively correlated with clay content. The leaching of colloids from intact soil cores also decreased with increasing clay content at an ini- tial soil-water potential of -98 and -2.5 hPa, and no difference between

  6. Magnitude, modeling and significance of swelling and shrinkage processes in clay soils.

    NARCIS (Netherlands)

    Bronswijk, J.J.B.

    1991-01-01

    The dynamic process of swelling and shrinkage in clay soils has significant practical consequences, such as the rapid transport of water and solutes via shrinkage cracks to the subsoil, and the destruction of buildings and roads on clay soils. In order to develop measuring methods and computer simul

  7. Validation of water sorption-based clay prediction models for calcareous soils

    DEFF Research Database (Denmark)

    Arthur, Emmanuel; Razzaghi, Fatemeh; Moosavi, Ali

    2017-01-01

    Soil particle size distribution (PSD), particularly the active clay fraction, mediates soil engineering, agronomic and environmental functions. The tedious and costly nature of traditional methods of determining PSD prompted the development of water sorption-based models for determining the clay...

  8. The relation between heavy metals distribution and particle size fractions in some egyptian soils

    Directory of Open Access Journals (Sweden)

    Monier Morad Wahba

    Full Text Available Soil as a part of the environment receives pollutants from all types of human activities. Heavy metals originating from various organic waste sources and industrial activities accumulate in the soil surface, and their fate depends not only on the types and amounts of waste applied, but on soil properties. Furthermore, soils differ in their retention power for various heavy or trace elements. Twelve soil samples were selected from different sites irrigated with industrial and sewage wastes at Helwan city (Cairo Governorate in the north and El-Saff (Giza Governorate in the south. Separation of clay, silt and sand fractions were carried out. Chemical analyses of trace elements in the form of total and available contents (Fe, Mn, Zn and Pb were determined in each fraction. The obtained results show that the average amounts of heavy metals in different fractions are related to the particle size of the soil especially the fine fraction. Heavy metals content was always in the surface layers higher than sub-surface. All metals were highest in clay fraction followed by silt and sand fractions respectively. This investigation discussed the importance of the fine fractions in the accumulation of heavy metals by coordination number in the lattice structure.

  9. To what extent clay mineralogy affects soil aggregation? Consequences for soil organic matter stabilization

    Science.gov (United States)

    Fernandez-Ugalde, O.; Barré, P.; Hubert, F.; Virto, I.; Chenu, C.; Ferrage, E.; Caner, L.

    2012-12-01

    Aggregation is a key process for soil functioning as it influences C storage, vulnerability to erosion and water holding capacity. While the influence of soil organic C on aggregation has been documented, much less is known about the role of soil mineralogy. Soils usually contain a mixture of clay minerals with contrasted surface properties, which should result on different abilities of clay minerals to aggregation. We took advantage of the intrinsic mineral heterogeneity of a temperate Luvisol to compare the role of clay minerals (illite, smectite, kaolinite, and mixed-layer illite-smectite) in aggregation. In a first step, grassland and tilled soil samples were fractionated in water in aggregate-size classes according to the hierarchical model of aggregation (Tisdall and Oades, 1982). Clay mineralogy and organic C in the aggregate-size classes were analyzed. The results showed that interstratified minerals containing swelling phases accumulated in aggregated fractions (>2 μm) compared to free clay fractions (500 μm) to micro-aggregates (50-250 μm). C concentration and C/N ratio followed the opposite trend. These results constitute a clay mineral-based evidence for the hierarchical model of aggregation, which postulates an increasing importance of the reactivity of clay minerals in the formation of micro-aggregates compared to larger aggregates. In the latter aggregates, formation relies on the physical enmeshment of particles by fungal hyphae, and root and microbial exudates. In a second step, micro-aggregates from the tilled soil samples were submitted to increasingly disaggregating treatments by sonication to evaluate the link between their water stability and clay mineralogy. Micro-aggregates with increasing stability showed an increase of interstratified minerals containing swelling phases and C concentration for low intensities of disaggregation (from 0 to 5 J mL-1). This suggests that swelling phases promote their stability. Swelling phases and organic C

  10. Electrodialytic remediation of heavy metal polluted soil

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Jensen, Pernille Erland; Kirkelund, Gunvor Marie

    2012-01-01

    Electrodialytic soil remediation is a method for removal of heavy metals. Good results have previously been obtained with both treatment of a stationary, water saturated soil matrix and with remediation of a stirred suspension of soil in water. The two different setups have different uses......). In the stirred setup it is possible to shorten the transport route to few mm and to have a faster and continuous process. The present paper for the first time reports a direct comparison of the two options. The remediation of the stirred suspension showed faster than remediation of the water saturated soil even...... without a short distance between the membranes. The acidification of the suspended soil was fastest and following the mobilization of heavy metals. This may indicate that water splitting at the anion exchange membrane is used more efficiently in the stirred setup....

  11. Dendroremediation of heavy metal polluted soils.

    Science.gov (United States)

    González-Oreja, J A; Rozas, M A; Alkorta, I; Garbisu, C

    2008-01-01

    Heavy metals are among the most common and harmful pollutants reaching the soil ecosystem all over the world. Phytoextraction is an effective, non-intrusive, inexpensive, aesthetically pleasing, socially accepted, highly promising phytotechnology for the remediation of soils polluted with heavy metals. To overcome the so-called 'Achilles' heel' of phytoextraction, namely, the long time needed for effective remediation, this phytotechnology should be combined with other profit-making activities such as forestry or bioenergy production. Dendroremediation, or the use of trees to clean up polluted soil and water, appears of great potential for metal phytoextraction, especially when using fast-growing tree species, for example, willows (Salix sp. pl.) and poplars (Populus sp. pl.). Most important, the ecologic and environmental risks of dispersing heavy metals into the ecosystems by dendroremediation strategies should be minimized by selecting the right tree species, properly managing/disposing the polluted plant material, or a combination of both options.

  12. Effect of Clay Minerals on the Chemical Characteristics of Soil Humus

    Institute of Scientific and Technical Information of China (English)

    YEWEI; WENQIXIAO

    1996-01-01

    Chemical characteristics of humic substances in soils with different mineralogical characteristics and under different utilization paterns in Zhangpu,Fujian Province,together with two pairs of cultivated soils in North China Plain were studied by chemical analysis,visible and IR spectroscopy and 13C NMR spectrometry.For soils in Zhanpu the HA/FA ratio and both the aromaticity and the degree of humification of HA were higher in soils with montmorillonite as the predominant clay mineral than in those with kaolinite as the predominant clay mineral,provided these soils were under the same utilization pattern.While for each pair of soils with similar mineralogical characteristics the HA/FA ratio was higher and the C/H ratio and the contnet of carboxyl group of HA were lower in paddy soil than in upland soil.Among the upland soils(or paddy soils)studied the Ha/FA ratio of soil in Zhangpu with kaolinite as the predominant clay mineral was the lowest,and that of soil in Zhangpu with montmorillonite as the predominant clay mineral was the highest .the lowest.and that of soil in Zhangpu with montmorillonite as the predominant clay mineral was the highest It was concluded that the presence of montmorillonite favored the fromation and maturation of humic acid.

  13. Clays Can Decrease Gaseous Nutrient Losses from Soil-Applied Livestock Manures.

    Science.gov (United States)

    Pratt, Chris; Redding, Matthew; Hill, Jaye; Brown, Grant; Westermann, Maren

    2016-03-01

    Clays could underpin a viable agricultural greenhouse gas (GHG) abatement technology given their affinity for nitrogen and carbon compounds. We provide the first investigation into the efficacy of clays to decrease agricultural nitrogen GHG emissions (i.e., NO and NH). Via laboratory experiments using an automated closed-vessel analysis system, we tested the capacity of two clays (vermiculite and bentonite) to decrease NO and NH emissions and organic carbon losses from livestock manures (beef, pig, poultry, and egg layer) incorporated into an agricultural soil. Clay addition levels varied, with a maximum of 1:1 to manure (dry weight). Cumulative gas emissions were modeled using the biological logistic function, with 15 of 16 treatments successfully fitted ( clay addition level compared with no clay addition, but this difference was not significant ( = 0.17). Nitrous oxide emissions were significantly lower (×3; clay addition level compared with no clay addition. When assessing manures individually, we observed generally decreasing trends in NH and NO emissions with increasing clay addition, albeit with widely varying statistical significance between manure types. Most of the treatments also showed strong evidence of increased C retention with increasing clay additions, with up to 10 times more carbon retained in treatments containing clay compared with treatments containing no clay. This preliminary assessment of the efficacy of clays to mitigate agricultural GHG emissions indicates strong promise.

  14. Modified centroid for estimating sand, silt and clay from soil texture class

    Science.gov (United States)

    Models that require inputs of soil particle size commonly use soil texture class for input; however, texture classes do not represent the continuum of soil size fractions. Soil texture class and clay percentage are collected as a standard practice for many land management agencies (e.g., NRCS, BLM, ...

  15. Leaching of Heavy Metals Using SPLP Method from Fired Clay Brick Incorporating with Sewage Sludge

    Science.gov (United States)

    Kadir, Aeslina Abdul; Salim, Nurul Salhana Abdul; Amira Sarani, Noor; Aqma Izurin Rahmat, Nur

    2017-05-01

    Sewage sludge is a by-product generate from wastewater treatment process. The sewage sludge contains significant trace metal such as Cr, Mn, Ni, Cu, Zn, As, Cd and Pb which are toxic to the environment. Sewage sludge is disposed of by landfilling method. However, this option not suitable because of land restriction and environmental control regulations imposed. Therefore, sewage sludge from wastewater treatment plant was incorporated into fired clay brick to produce good quality of brick as well as reducing heavy metals from sludge itself. Sewage sludge with 0%, 1%, 5%, 10% and 20% of were incorporated into fired clay bricks and fired at 1050°C temperature with heating rates of 1°C/min. The brick sample then crushed and sieved through 9.5 mm sieve for Synthetic Precipitation Leaching Procedure (SPLP). From the results, incorporation up to 20% of sewage sludge has leached less heavy metals and compliance with USEPA standard.

  16. Effect of Application of Increasing Concentrations of Contaminated Water on the Different Fractions of Cu and Co in Sandy Loam and Clay Loam Soils

    Directory of Open Access Journals (Sweden)

    John Volk

    2016-12-01

    Full Text Available This study aimed to establish the fate of copper (Cu and cobalt (Co in sandy loam and clay loam soils that had been irrigated with increasing concentrations of contaminated water. A sequential extraction procedure was used to determine the fractions of Cu and Co in these soils. The concentration of bioavailable Cu and Co on clay loam was 1.7 times that of sandy loam soil. Cu on sandy loam soil was largely in the organic > residual > exchangeable > water-soluble > carbonate fractions, whereas on clay loam soil the element was largely in organic > exchangeable > residual > carbonate > water-soluble fractions. Co was largely observed in the exchangeable, water-soluble, and carbonate fractions, but with no particular trend observed in both soil types. When crops are grown on sandy soils that have a low capacity to hold heavy metals, the resulting effect would be high uptake of the heavy metals in crop plants. Because the predominant forms of Cu and Co vary in soils, it is expected that the metals will behave differently in the soils.

  17. Effect of pH on the heavy metal-clay mineral interaction

    Energy Technology Data Exchange (ETDEWEB)

    Altyn, O.; Oezbelge, H.O.; Dogu, T.; Oezbelge, T.A. [Middle East Technical Univ., Ankara (Turkey)

    1997-12-31

    Adsorption and ion exchange of Pb and Cd on the surface of kaolinite and montmorillonite were studied with a strong emphasis on the pH values of solutions containing heavy metal ions. The pH range studied was 2.5 - 9. For kaolinite at a clay/solution ratio of 1/10 (w/w), Pb removal changes from 20 to 30% for an initial Pb concentration of 1640 ppm, and Cd removal changes from 10 to 20% for an initial Cd concentration of 1809 ppm. Due to its high exchange capacity, montmorillonite can remove more heavy metal than kaolinite. Removal rates for montmorillonite can reach up to 90% for both Pb and Cd. In the pH range of 3-6, there is a plateau for the removal rates. At pH values higher than 6, removal seems to increase artificially due to the precipitation of heavy metals. Under similar conditions for both clays, the rate of removal of Pb is always higher than that of Cd. As the pH value decreases for montmorillonite, there is a strong tendency for decreased surface area and swelling, as indicated by BET surface area measurements, adsorbed layer thickness and pore size distribution data. In the range of pH values studied, X-ray diffraction analysis showed the appearance of a characteristic (001) peak for montmorillonite, indicating that the crystalline structure of the clay was intact during the experiments.

  18. Accumulation of Tobacco mosaic virus (TMV) at different depths clay and loamy sand textural soils due to tobacco waste application.

    Science.gov (United States)

    Gülser, Coşkun; Yilmaz, Nazli Kutluk; Candemir, Feride

    2008-11-01

    The effects of tobacco waste (TW) application to the soil surface on the accumulation of Tobacco mosaic virus (TMV) in clay and loamy sand textural soils at various depths were investigated in two different fields. The tobacco waste had been found to be infected with TMV. Eighteen months after TW application to the soil surface, soils were sampled at 20 cm intervals through to 80 cm depth. The DAS-ELISA method was performed to determine infection of soil with TMV. The viruses persisted in clay soil for a long period compared with loamy sand soil. There was no accumulation of TMV at any depth of loamy sand soil in Experimental Field 2. TMV adsorption to soil particles in 0-60 cm depth of clay soil was determined in all TW treatments in Experimental Field 1. The highest ELISA Absorbance (A405) values in all treatments were determined in the 20-40 cm soil depth that had the highest clay content. ELISA A405 values of TMV at different depths of clay soil gave significant correlations with clay content (r = 0.793**), EC values (r = 0.421**) and soil pH (r = -0.405**). Adsorption of TMV to net negatively charged clay particle surfaces increased with increasing EC values of soil solution. Decreasing soil pH and infiltration rate increased adsorption of TMV to clay particles. Higher infiltration rate and lower clay content in loamy sand soil caused leaching of TMV from the soil profile.

  19. Sorption and distribution of Zn in a sludge-amended soil: influence of the soil clay mineralogy

    OpenAIRE

    Proust, D.

    2015-01-01

    International audience; Purpose Conventional pedological survey generally assesses soil metal pollution by comparing total metal concentrations in soil to geochemical baselines in parent rock. This global approach overlooks the sorption capacities of the clay minerals which form at micrometric scale in weathering microsystems and are essential for the behaviour of metals in soil. Therefore, our aim was to investigate the impact of these weathering microsystems and their clay mineralogy upon Z...

  20. Bioremediation of a tropical clay soil contaminated with diesel oil.

    Science.gov (United States)

    Chagas-Spinelli, Alessandra C O; Kato, Mario T; de Lima, Edmilson S; Gavazza, Savia

    2012-12-30

    The removal of polyaromatic hydrocarbons (PAH) in tropical clay soil contaminated with diesel oil was evaluated. Three bioremediation treatments were used: landfarming (LF), biostimulation (BS) and biostimulation with bioaugmentation (BSBA). The treatment removal efficiency for the total PAHs differed from the efficiencies for the removal of individual PAH compounds. In the case of total PAHs, the removal values obtained at the end of the 129-day experimental period were 87%, 89% and 87% for LF, BS and BSBA, respectively. Thus, the efficiency was not improved by the addition of nutrients and microorganisms. Typically, two distinct phases were observed. A higher removal rate occurred in the first 17 days (P-I) and a lower rate occurred in the last 112 days (P-II). In phase P-I, the zero-order kinetic parameter (μg PAH g(-1) soil d(-1)) values were similar (about 4.6) for all the three treatments. In P-II, values were also similar but much lower (about 0.14). P-I was characterized by a sharp pH decrease to less than 5.0 for the BS and BSBA treatments, while the pH remained near 6.5 for LF. Concerning the 16 individual priority PAH compounds, the results varied depending on the bioremediation treatment used and on the PAH species of interest. In general, compounds with fewer aromatic rings were better removed by BS or BSBA, while those with 4 or more rings were most effectively removed by LF. The biphasic removal behavior was observed only for some compounds. In the case of naphthalene, pyrene, chrysene, benzo[k]fluoranthene and benzo[a]pyrene, removal occurred mostly in the P-I phase. Therefore, the best degradation process for total or individual PAHs should be selected considering the target compounds and the local conditions, such as native microbiota and soil type.

  1. Effect of Kiwi Shell and Incubation Time on Mobility of Lead and Cadmium in Contaminated Clay Soil

    Directory of Open Access Journals (Sweden)

    Bahareh Lorestani

    2014-06-01

    Full Text Available In this study, the effectiveness of kiwi shell was investigated to reduce the mobility of Lead and Cadmium in clay soil in different intervals. For this purpose a clay soil sample was contaminated with Lead and Cadmium in distinct dishes with 10 and 600 ppm concentrations respectively and mixed with 5% kiwi shell. Samples were placed in incubator, and then sampling of soil in incubator was performed in intervals 3 hours, 1, 3, 7, 14, 21 and 28 days. Heavy metals concentrations were determined in different fractions of soil including exchangeable, carbonate, Fe-Mn oxides, organic matter, and residual with sequential extraction procedure and atomic absorption spectrophotometry. The results showed that during incubation, Lead concentration in treatments with kiwi shell rather than control soil increased in carbonate from 19.48 to 26.18 and in organic matter from 9.06 to 18.66 percent. Exchangeable, Fe-Mn oxides and residual fractions decreased from 11.48 to 6.69, 45.72 to 39.83 and 14.21 to 7.90 percent respectively. In samples with absorbent compared with control soil, Cadmium concentration in carbonate and organic matter increased from 28.20 to 38.40 and 18.76 to 24.72, while in exchangeable, Fe-Mn oxides and residual decreased from 16.66 to 13.69, 37.25 to 19.65 and 6.24 to 3.61 percent respectively. This study revealed that kiwi shell function in decreasing Cadmium and Lead mobility in studied clay soil were increased with increasing incubation time, but Cadmium compared with Lead required additional time to transfer and mobility to constant and stable soil fractions such as, organic matter and Fe-Mn oxides.

  2. Carbon saturation in the silt and clay particles in soils with contrasting mineralogy

    Directory of Open Access Journals (Sweden)

    Francisco Matus

    2016-07-01

    Full Text Available The silt and clay particles play a key role as stabilizing agents of soil organic carbon (SOC. Several lines of evidence indicate a theoretical maximum or C saturation in individual particles. In the present study, we hypothesized that a C fraction displaying linear accumulation relative to the SOC is not influenced by C saturation, while a fraction displaying an asymptotic relationship is regarded as saturated (Stewart et al., 2008. The aim of the present study was to compare the amount of C in the silt and clay sized fractions in temperate and subtropical cropping soils across a range of textures with different mineralogy. Twenty-one and 18 soil samples containing 1:1 and 2:1 clay of temperate soil from Chile under monoculture of maize (Zea maiz L. for at least 30 years and 9 subtropical soils from Mexico under maize and bean (Phaseolus vulgaris L. cropping for 9 years having mixed clay were collected at 0-0.1 m. The SOC of 2:1 soils was significantly higher (14±0.5 g kg-1 dry soil than 1:1 soils (10±0.7 g kg-1. However, subtropical soils showed the highest values (59±0.5 g kg-1. A positive (P < 0.01 relationship was observed between the SOC and the C in the silt fraction (R2 0.80-0.97, P < 0.01. In contrast, the clay fraction remained constant or showed asymptotic behavior. We conclude that the silt fraction, unlike clay, showed no evidence of C saturation, while clay accumulates C to a maximum. On average, the 2:1 clay was saturated at 1-2 g C kg-1 and 1:1 at 1 g C kg-1, and subtropical soils at 14 g C kg-1.

  3. Effect of red clay on diesel bioremediation and soil bacterial community.

    Science.gov (United States)

    Jung, Jaejoon; Choi, Sungjong; Hong, Hyerim; Sung, Jung-Suk; Park, Woojun

    2014-08-01

    Red clay is a type of soil, the red color of which results from the presence of iron oxide. It is considered an eco-friendly material, with many industrial, cosmetic, and architectural uses. A patented method was applied to red clay in order to change its chemical composition and mineral bioavailability. The resulting product was designated processed red clay. This study evaluates the novel use of red clay and processed red clay as biostimulation agents in diesel-contaminated soils. Diesel biodegradation was enhanced in the presence of red clay and processed red clay by 4.9- and 6.7-fold, respectively, and the number of culturable bacterial cells was correlated with the amount of diesel biodegradation. The growth of Acinetobacter oleivorans DR1, Pseudomonas putida KT2440, and Cupriavidus necator was promoted by both types of red clays. Culture-independent community analysis determined via barcoded pyrosequencing indicated that Nocardioidaceae, Xanthomonadaceae, Pseudomonadaceae, and Caulobacteraceae were enriched by diesel contamination. Bacterial strain isolation from naphthalene- and liquid paraffin-amended media was affiliated with enriched taxa based on 16S rRNA gene sequence identity. We suggest that the biostimulating mechanism of red clay and processed red clay is able to support bacterial growth without apparent selection for specific bacterial species.

  4. Heavy metals in urban soils of the Granada city (Spain)

    Science.gov (United States)

    Delgado, Gabriel; Sánchez-Marañón, Manuel; Bech, Jaume; Sartini, Alessandra; Martín-García, Juan Manuel; Delgado, Rafael

    2013-04-01

    Urban soils (Anthrosols, Technosols, and the remaining natural patches) are essential components of the city ecosystems influencing the quality of life for people. Unfortunately, because of the high concentration of matter and energy that occurs in any city, these soils might accumulate potentially toxic pollutants such as heavy metals, organic compounds, pathogens, pharmaceuticals, and soluble salts. Contamination by heavy metals has been considered especially dangerous because they can affect human health via inhalation of dust, ingestion, or skin contact with soils. Children are the more exposed citizens in gardens and parks. Accordingly, our objective was to analyze the content of heavy metals in soils of the two most emblematic, extensive, and visited landscaped areas of the Granada city (Salón Garden, which dates back to 1612, and Federico García Lorca Park, opened since 1993) for assessing the health hazard. Using a composite sampling of 20-30 points chosen at random, we collected the upper soil (10 cm) of five representative plots for each landscaped area. We determined soil characteristics by routine procedures and metal elements using ICP-mass. From high to low concentration we found Mn, Ba, Pb, Zn, V, Sn, Cr, Cu, Ni, Sb, Y, As, Sc, Co, Th, Au, U, Mo, Be, Bi, Tl, Cd, and In; the first 10 metals ranging between 478 and 22 ppm. Mn, Ba, and other trace elements were strongly correlated with soil properties suggesting the inheritance as a possible source of metal variation, especially in the soils of younger Park, where the materials used to build gardens in the five sampled plots seemed to be more variable (carbonates: 10-40%, clay: 18-26%, pH: 7.6-7.9, organic matter: 3-7%, free iron 0.5-1.1%). The content of many other metals measured in the sampled plots, however, were independent of soil material and management. On the other hand, compared to agricultural and native soils of the surroundings, our urban soils had obviously greater content in organic

  5. Prediction of clay content from water vapour sorption isotherms considering hysteresis and soil organic matter content

    DEFF Research Database (Denmark)

    Arthur, Emmanuel; Tuller, Markus; Moldrup, Per

    2015-01-01

    for estimating clay content from hygroscopic water at different relative humidity (RH) levels while considering hysteresis and organic matter content. Continuous adsorption/desorption vapour sorption isotherm loops were measured for 150 differently textured soils with a state-of-the-art vapour sorption analyser......Soil texture, in particular the clay fraction, governs numerous environmental, agricultural and engineering soil processes. Traditional measurement methods for clay content are laborious and impractical for large-scale soil surveys. Consequently, clay prediction models that are based on water...... vapour sorption, which can be measured within a shorter period of time, have recently been developed. Such models are often based on single-point measurements of water adsorption and do not account for sorption hysteresis or organic matter content. The present study introduces regression relationships...

  6. Evaluation of Water Vapor Sorption Hysteresis in Soils: The Role of Organic Matter and Clay

    DEFF Research Database (Denmark)

    Arthur, Emmanuel; Tuller, Markus; Moldrup, Per

    2015-01-01

    Hysteresis of the soil water characteristic (SWC) has been extensively studied for matric potentials between zero and −1.5 MPa. However, little information is available on how to quantify, evaluate, and identify the causes of hysteresis at potentials below −10 MPa where vapor sorption plays...... an important role. It is clear that modeling physical and biological soil processes is more accurate when SWC hysteresis is considered, particularly at low potentials where small differences in water content are associated with large changes in potential energy. The objectives of the presented study were to......: (i) evaluate and compare recently developed methods (MBET-n, Dh and SPN) for quantifying hysteresis in soils and pure clays, and (ii) investigate the role of organic matter (OM) and clay content and type on hysteresis. Five pure clays and two sets of soils with gradients in organic matter and clay...

  7. Experimental Study on Unconfined Compressive Strength of Basalt Fiber Reinforced Clay Soil

    Directory of Open Access Journals (Sweden)

    Lei Gao

    2015-01-01

    Full Text Available In order to study the mechanism and effect of basalt fiber reinforced clay soil, a series of unconfined compressive strength tests conducted on clay soil reinforced with basalt fiber have been performed under the condition of optimum water content and maximum dry density. Both the content and length of basalt fiber are considered in this paper. When the effect of content is studied, the 12 mm long fibers are dispersed into clay soil at different contents of 0.05%, 0.1%, 0.15%, 0.20%, 0.25%, 0.30%, and 0.35%. When the effect of length is researched, different lengths of basalt fibers with 4 mm, 8 mm, 12 mm, and 15 mm are put into soil at the same content of 0.05%. Experimental results show that basalt fiber can effectively improve the UCS of clay soil. And the best content and length are 0.25% and 12 mm, respectively. The results also show that the basalt fiber reinforced clay soil has the “poststrong” characteristic. About the reinforcement mechanism, the fiber and soil column-net model is proposed in this paper. Based on this model and SEM images, the effect of fiber content and length is related to the change of fiber-soil column and formation of effective fiber-soil net.

  8. Organic farming effects on clay dispersion in carbon-exhausted soils

    OpenAIRE

    Schjønning, Per; de Jonge, Lis Wollesen; Olesen, Jørgen E.; Greve, Mogens Humlekrog

    2009-01-01

    Many Danish soils are depleted in organic matter (OM) after decades of intensive cereal cultivation (Schjønning et al., 2009). In this paper we show that clay particles (colloids) in soils that are low in OM content are easily dispersed in the soil water, which in turn has important effects on soil ecosystem functions and services. Organic farming systems generally tend to increase soil OM contents and may thus mitigate the negative effects.

  9. Advances in characterization of the soil clay mineralogy using X-ray diffraction: from decomposition to profile fitting

    OpenAIRE

    2009-01-01

    International audience; Structural characterization of soil clay minerals often remains limited despite their key influence on soil properties. In soils, complex clay parageneses result from the coexistence of clay species with contrasting particle sizes and crystal-chemistry and from the profusion of mixed layers with variable compositions. The present study aimed at characterizing the mineralogy and crystal chemistry of the < 2 μm fraction along a profile typical of soils from Western Europ...

  10. Colloid and Phosphorus Leaching From Undisturbed Soil Cores Sampled Along a Natural Clay Gradient

    DEFF Research Database (Denmark)

    Vendelboe, Anders Lindblad; Møldrup, Per; Heckrath, Goswin Johann;

    2011-01-01

    The presence of strongly sorbing compounds in groundwater and tile drains can be a result of colloid-facilitated transport. Colloid and phosphorus leaching from macropores in undisturbed soil cores sampled across a natural clay gradient at Aarup, Denmark, were studied. The aim of the study...... was to correlate easily measurable soil properties, such as clay content and water-dispersible colloids, to colloid and phosphorus leaching. The clay contents across the gradient ranged from 0.11 to 0.23 kg kgj1. Irrigating with artificial rainwater, all samples showed a high first flush of colloids and phosphorus...

  11. [Preliminary characterization of clay minerals from four typical soils of Northeast China].

    Science.gov (United States)

    Juan, Ying-hua; Wu, Zhi-jie; Chen, Li-jun; Wang, Ren; Gong, Liang; Bao, Hong-jing; Liu, Yan

    2010-07-01

    The black soil, albic soil, brown soil and cinnamon soil in Northeast China were selected as research objects, and their mineral characteristics were evaluated with Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction spectroscopy (XRD), and scanning electron microscopy(SEM). The results showed that the mineral atlas of test soils were of montmorillonite type. Quartz was the main component of clay minerals in the four soils. Montmorillonite and high mountain stone had higher amounts in black soil and albic soil, and mica and high mountain stone were more in brown soil and cinnamon soil. Generally, the surface of mineral particles in black soil, brown soil and cinnamon soil seems to be of laminarization with significant un-uniformity, and compared with black soil, brown soil and cinnamon soil had more smooth surface. In contrast, the mineral particles in albic soil had distinct profile and smooth surface with some interstice. It was indicated that the components and characteristics of soil clay minerals could be analyzed by soil spectroscopy, and the related information to be obtained could be accurate and available.

  12. Estimation of hydraulic conductivity on clay content in soil determined from resistivity data

    Energy Technology Data Exchange (ETDEWEB)

    Shevnin, Vladimir; Delgado-Rodriguez, Omar; Mousatov, Aleksandr [Mexican Petroleum Institute, Mexico, D.F. (Mexico); Ryjov, Albert [Moscow State Geological Prospecting Academy, Geophysical Faculty, Moscow (Russian Federation)

    2006-07-15

    The influence of clay content in sandy and clayey soils on hydraulic conductivity (filtration coefficient) is considered. A review of published experimental data on the relationship of hydraulic conductivity with soil lithology and grain size, as dependent on clay content is presented. Theoretical calculations include clay content. Experimental and calculated data agree, and several approximation formulas for filtration coefficient vs clay content are presented. Clay content in soil is estimated from electric resistivity data obtained from 2D VES interpretation. A two-step method is proposed, the first step including clay content calculating from soil resistivity and groundwater salinity, and the second step including filtration coefficient estimating from clay content. Two applications are presented. [Spanish] El contenido de arcilla en suelos areno-arcillosos influye sobre la permeabilidad hidraulica (coeficiente de filtracion). Se presenta una revision de datos experimentales publicados que relacionan el coeficiente de filtracion con el tipo litologico del suelo y el tamano de las particulas. A partir de calculos teoricos, se modifican las conocidas formulas que relacionan el coeficiente de filtracion con el contenido de arcilla. Se estima el contenido de arcilla a partir de los datos interpretados por el metodo SEV, y se propone un procedimiento para la estimacion del coeficiente de filtracion: (a) calculo del contenido de arcilla a partir de la resistividad del suelo y de la salinidad del agua subterranea, (b) estimacion del coeficiente de filtracion a partir del contenido de arcilla. Se presentan algunos ejemplos de la aplicacion de esta metodologia.

  13. Radiocesium sorption in relation to clay mineralogy of paddy soils in Fukushima, Japan

    Energy Technology Data Exchange (ETDEWEB)

    Nakao, Atsushi, E-mail: na_4_ka_triplochiton@kpu.ac.jp [Graduate School of Life and Environmental Sciences, Kyoto Prefectural University, Hangi-cho 1-5, Shimogamo, Sakyo-ku, Kyoto 606-8522 (Japan); Ogasawara, Sho [Graduate School of Life and Environmental Sciences, Kyoto Prefectural University, Hangi-cho 1-5, Shimogamo, Sakyo-ku, Kyoto 606-8522 (Japan); Sano, Oki; Ito, Toyoaki [Field Science Center, Graduate School of Agricultural Science, Tohoku University, Naruko-Onsen 232-3, Osaki, Miyagi 989-6711 (Japan); Yanai, Junta [Graduate School of Life and Environmental Sciences, Kyoto Prefectural University, Hangi-cho 1-5, Shimogamo, Sakyo-ku, Kyoto 606-8522 (Japan)

    2014-01-01

    Relationships between Radiocesium Interception Potential (RIP) and mineralogical characteristics of the clay fraction isolated from 97 paddy soils (Hama-dori, n = 25; Naka-dori, n = 36; Aizu, n = 36) in Fukushima Prefecture, Japan were investigated to clarify the mineralogical factors controlling the {sup 137}Cs retention ability of soils (half-life 30.1 y). Of all the fission products released by the Fukushima accident, {sup 137}Cs is the most important long-term contributor to the environmental contamination. The RIP, a quantitative index of the {sup 137}Cs retention ability, was determined for the soil clays. The composition of clay minerals in the soil clays was estimated from peak areas obtained using X-ray diffraction (XRD) analyses. The predominant clay mineral was smectite in soils from Hama-dori and Aizu, while this was variable for those from Naka-dori. Native K content of the soil clays was found to be an indicator of the amount of micaceous minerals. The average RIP for the 97 soil clays was 7.8 mol kg{sup −1}, and ranged from 2.4 mol kg{sup −1} to 19.4 mol kg{sup −1}. The RIP was significantly and positively correlated with native K content for each of the geographical regions, Hama-dori (r = 0.76, p < 0.001), Naka-dori (r = 0.43, p < 0.05), and Aizu (r = 0.76, P < 0.001), while it was not related to the relative abundance of smectite. The linear relationship between RIP and native K content not only indicate a large contribution of micaceous minerals to the {sup 137}Cs retention ability of the soil clays, but also could be used to predict the {sup 137}Cs retention ability of soil clays for other paddy fields in Fukushima and other areas. - Highlights: • RIP was measured for 97 paddy soils from Fukushima to assess {sup 137}Cs retention ability. • The dominant clay mineral was smectite, but this did not control RIP. • RIP was positively correlated with native K content. • Micaceous minerals were found to control the {sup 137}Cs retention

  14. Relationship between heavy metal contents and clay mineral properties in surface sediments: Implications for metal pollution assessment

    Science.gov (United States)

    Chen, Yueh-Min; Gao, Jin-bo; Yuan, Yong-Qiang; Ma, Jun; Yu, Shen

    2016-08-01

    Clay minerals in surface sediments can affect the adsorption of heavy metals. However, few historical studies have focused on the influence of fine clay mineral characteristics on metal sorption. Since the reactions between heavy metals and fine clay minerals in sediments remain obscure, this study investigates the influence of fine clay mineral characteristics on metal sorption in a typical urbanizing small watershed. Clay minerals, including nanoparticles with various size fractions ranging from 1000 to 2000 (clay), 450-1000 (fine clay), and 220-450 (very fine clay) nm were used to demonstrate their transformation from well crystalline to poorly crystalline. The nanoparticles were collected and evaluated by determination of their surface area, X-ray diffraction, scanning electron microscopy (SEM) and chemical analyses. The relationship between metal content and properties of the surface sediments was also revealed by canonical correlation analysis. With smaller particle sizes, nanoparticles (very fine clay) were observed to be poorly crystalline, possibly indicating few repetitions of unit cells as a result of preferential structural disruption of other crystal planes caused by pressure-induced phase transition in the fine-size fractions. The first canonical matrix (M) variables of metal contents can be predicted by both surface area and pore volume, followed by kaolinite and illite contents. On the other hand, the category of metal, i.e., Cu, Cr, Zn, or Pb, was significantly correlated with the first 'M' canonical variables. The data obtained in the present study are of fundamental significance in advancing our understanding of the reactions between heavy metals and fine clay minerals in the terrestrial ecosystem.

  15. Revealing Soil Structure and Functional Macroporosity along a Clay Gradient Using X-ray Computed Tomography

    DEFF Research Database (Denmark)

    Naveed, Muhammad; Møldrup, Per; Arthur, Emmanuel

    2013-01-01

    The influence of clay content in soil-pore structure development and the relative importance of macroporosity in governing convective fluid flow are two key challenges toward better understanding and quantifying soil ecosystem functions. In this study, soil physical measurements (soil......-water retention and air permeability) and x-ray computed tomography (CT) scanning were combined and used from two scales on intact soil columns (100 and 580 cm3). The columns were sampled along a natural clay gradient at six locations (L1, L2, L3, L4, L5 and L6 with 0.11, 0.16, 0.21, 0.32, 0.38 and 0.46 kg kg−1...... clay content, respectively) at a field site in Lerbjerg, Denmark. The water-holding capacity of soils markedly increased with increasing soil clay content, while significantly higher air permeability was observed for the L1 to L3 soils than for the L4 to L6 soils. Higher air permeability values...

  16. Fine-resolution multiscale mapping of clay minerals in Australian soils measured with near infrared spectra

    Science.gov (United States)

    Viscarra Rossel, R. A.

    2011-12-01

    Clay minerals are the most reactive inorganic components of soils. They help to determine soil properties and largely govern their behaviors and functions. Clay minerals also play important roles in biogeochemical cycling and interact with the environment to affect geomorphic processes such as weathering, erosion and deposition. This paper provides new spatially explicit clay mineralogy information for Australia that will help to improve our understanding of soils and their role in the functioning of landscapes and ecosystems. I measured the abundances of kaolinite, illite and smectite in Australian soils using near infrared (NIR) spectroscopy. Using a model-tree algorithm, I built rule-based models for each mineral at two depths (0-20 cm, 60-80 cm) as a function of predictors that represent the soil-forming factors (climate, parent material, relief, vegetation and time), their processes and the scales at which they vary. The results show that climate, parent material and soil type exert the largest influence on the abundance and spatial distribution of the clay minerals; relief and vegetation have more local effects. I digitally mapped each mineral on a 3 arc-second grid. The maps show the relative abundances and distributions of kaolinite, illite and smectite in Australian soils. Kaolinite occurs in a range of climates but dominates in deeply weathered soils, in soils of higher landscapes and in regions with more rain. Illite is present in varied landscapes and may be representative of colder, more arid climates, but may also be present in warmer and wetter soil environments. Smectite is often an authigenic mineral, formed from the weathering of basalt, but it also occurs on sediments and calcareous substrates. It occurs predominantly in drier climates and in landscapes with low relief. These new clay mineral maps fill a significant gap in the availability of soil mineralogical information. They provide data to for example, assist with research into soil

  17. Comparing Kriging and Regression Approaches for Mapping Soil Clay Content in a diverse Danish Landscape

    DEFF Research Database (Denmark)

    Adhikari, Kabindra; Bou Kheir, Rania; Greve, Mette Balslev

    2013-01-01

    technique at a given site has always been a major issue in all soil mapping applications. We studied the prediction performance of ordinary kriging (OK), stratified OK (OKst), regression trees (RT), and rule-based regression kriging (RKrr) for digital mapping of soil clay content at 30.4-m grid size using 6...

  18. Chemical dispersants and pre-treatments to determine clay in soils with different mineralogy

    Directory of Open Access Journals (Sweden)

    Cristiane Rodrigues

    2011-10-01

    Full Text Available Knowledge of the soil physical properties, including the clay content, is of utmost importance for agriculture. The behavior of apparently similar soils can differ in intrinsic characteristics determined by different formation processes and nature of the parent material. The purpose of this study was to assess the efficacy of separate or combined pre-treatments, dispersion methods and chemical dispersant agents to determine clay in some soil classes, selected according to their mineralogy. Two Brazilian Oxisols, two Alfisols and one Mollisol with contrasting mineralogy were selected. Different treatments were applied: chemical substances as dispersants (lithium hydroxide, sodium hydroxide, and hexametaphosphate; pre-treatment with dithionite, ammonium oxalate, and hydrogen peroxide to eliminate organic matter; and coarse sand as abrasive and ultrasound, to test their mechanical action. The conclusion was drawn that different treatments must be applied to determine clay, in view of the soil mineralogy. Lithium hydroxide was not efficient to disperse low-CEC electropositive soils and very efficient in dispersing high-CEC electronegative soils. The use of coarse sand as an abrasive increased the clay content of all soils and in all treatments in which dispersion occurred, with or without the use of chemical dispersants. The efficiency of coarse sand is not the same for all soil classes.

  19. Description of the phosphorus sorption and desorption processes in lowland peaty clay soils

    NARCIS (Netherlands)

    Schoumans, O.F.

    2013-01-01

    To determine phosphorus (P) losses from agricultural land to surface water, information is needed about the behavior of P in soils. In this study, the sorption and desorption characteristics of lowland peaty clay soils are described based on experimental laboratory studies. The maximum P sorption ca

  20. Consequences of preferential flow in cracking clay soils for contamination-risk of shallow aquifers

    NARCIS (Netherlands)

    Oostindie, K.; Bronswijk, J.J.B.

    1995-01-01

    A method is presented to asses the contamination risk of aquifers covered with cracking clay soils, with special emphasis on preferential flow through shrinkage cracks. A water extraction area was divided into units with homogeneous soil types and hydrological conditions. For each unit, a one-dimens

  1. Assessment of heavy metal pollution in soils along major roadside ...

    African Journals Online (AJOL)

    EJIRO

    Key words: Heavy metal contamination, roadside soils, enrichment factors, contamination factor, pollution load index ... The objectives of the present work were to: (1) Assess heavy metal ..... the basis of Varimax orthogonal rotation with Kaiser.

  2. Heavy metal content and potential health risk of geophagic white clay from the Kumasi Metropolis in Ghana

    Directory of Open Access Journals (Sweden)

    Marian Asantewah Nkansah

    2016-01-01

    Full Text Available Geophagia is the craving for non-food substances and commonly practiced among pregnant women and children. Consumption of geophagic clay samples can have serious implications on the health of the consumers as a result of the presence of toxic metals such as Pb, As, Hg and Cd. This study sought to determine the levels of heavy metals in the studied geophagic clay samples and to determine the potential risks of heavy metals as cumulative carcinogenic and non-carcinogenic risks to the health of the consumers via oral (ingestion and dermal exposure routes. A total of thirty (30 white clay samples were analysed using Niton Thermo scientific XRF Analyser (Mobile Test S, NDTr-XL3t-86956, com 24. The clay samples were found to contain essential elements such as Ca, Fe, K and Zn as well as toxic metals such as As and Pb. There were isolated cases of the presence of Hg and all samples had Cd levels below detection. Health risk indices such as hazard quotient and cancer risk were calculated and the results indicated that consumers are likely to suffer from cancer through ingestion of geophagic clay. Bioaccessibility studies were done on zinc and it did not indicate any potential toxicity due to zincs essential nature. The levels of heavy metals in some of the geophagic clay consumed by some residents in the Kumasi were high compared to the Permitted Maximum Tolerable Daily Intake (PMTDI by (WHO/FAO and may pose potential health threat over time.

  3. Effects of iron and aluminum oxides and clay content on penetration resistance of five Greek soils

    OpenAIRE

    2013-01-01

    The effect of amorphous and crystalline iron (Fe) and aluminum (Al) oxides and oxy-hydroxides as well as clay on soil penetration resistance of five Greek soils, as a function of soil water suction was studied for the whole range of soil moisture. The soils tested were of loamy texture and were collected from cultivated and non-cultivated areas of north and central Greece (Macedonia and Thessaly). The study aimed at understanding the role of the above mentioned soil components on penetration ...

  4. Heavy Metals in Soil and Crops of an Intensively Farmed Area: A Case Study in Yucheng City, Shandong Province, China

    Directory of Open Access Journals (Sweden)

    Linsheng Yang

    2010-02-01

    Full Text Available Yucheng City is located in northwestern Shandong Province, China, and is situated on the Huang-Huai-Hai Plain, the largest alluvial plain in China. In this study, 86 surface soil samples were collected in Yucheng City and analyzed for cation exchange capacity (CEC, soil organic matter (SOM, pH, available phosphorus (avail. P, phosphorus (P, aluminum (Al, and iron (Fe. These soils were also analyzed for ‘total’ chromium (Cr, nickel (Ni, copper (Cu, zinc (Zn, arsenic (As, mercury (Hg, cadmium (Cd, and lead (Pb, together with 92 wheat samples and 37 corn samples. There was no obvious heavy metal contamination in the soil and irrigation water. But the long-term accumulation of heavy metals in soil has lead to an increase of Ni, As, Hg and Pb concentrations in some of wheat and corn samples and Cd in wheat samples. Because of the numerous sources of soil heavy metals and the lower level of heavy metal in irrigation water, there is no significant relation between soil heavy metal concentrations and irrigation water concentrations. Cr, Ni were mainly from the indigenous clay minerals according to multivariate analysis. Little contribution to soil heavy metal contents from agricultural fertilizer use was found and the local anomalies of As, Cd, Hg, Pb in wheat and corn grain are attributed to the interactive effects of irrigation and fertilizer used. Aerial Hg, however may also be the source of Hg for soil, wheat and corn.

  5. Colloid and phosphorus leaching from undisturbed soil cores sampled along a natural clay gradient

    DEFF Research Database (Denmark)

    Vendelboe, Anders Lindblad; Møldrup, Per; Heckrath, Goswin Johann

    2011-01-01

    was to correlate easily measurable soil properties, such as clay content and water-dispersible colloids, to colloid and phosphorus leaching. The clay contents across the gradient ranged from 0.11 to 0.23 kg kgj1. Irrigating with artificial rainwater, all samples showed a high first flush of colloids and phosphorus...... and the so-called degree of P saturation (oxalate-extractable P on iron and aluminum minerals). Because higher colloidal P concentration was countered by a lower colloidal leaching, the total amount of leached P stayed remarkably constant along the natural clay gradient....

  6. Effects of Organic Matter and Clay Content in Soil on Pesticide Adsorption Processes

    Directory of Open Access Journals (Sweden)

    Rada Đurović

    2009-01-01

    Full Text Available The effect of organic matter and clay content on the adsorption of atrazine, acetochlor, clomazone, pendimethalin and oxyfluorfen in soil samples was studied. In order to determine whether and to what degree different soil properties affect the process of determinationof selected pesticides, three soils with different clay and organic matter contents were used. An optimized liquid-solid extraction procedure followed by SPME measurement was applied to analyse the selected pesticides in soil samples. Detection and quantificationwere done by gas chromatography-mass spectrometry (GC/MS. Relative standard deviation (RSD values for multiple analyses of soil samples fortified at 30 μg/kg of each pesticide were below 19%. Limits of detection (LODs for all compounds studied were less than 2 μg/kg. The results indicate that soils with different physico-chemical properties have different effects on the adsorption of most pesticides, especially at higher concentration levels.

  7. Heavy Metal Polluted Soils: Effect on Plants and Bioremediation Methods

    Directory of Open Access Journals (Sweden)

    G. U. Chibuike

    2014-01-01

    Full Text Available Soils polluted with heavy metals have become common across the globe due to increase in geologic and anthropogenic activities. Plants growing on these soils show a reduction in growth, performance, and yield. Bioremediation is an effective method of treating heavy metal polluted soils. It is a widely accepted method that is mostly carried out in situ; hence it is suitable for the establishment/reestablishment of crops on treated soils. Microorganisms and plants employ different mechanisms for the bioremediation of polluted soils. Using plants for the treatment of polluted soils is a more common approach in the bioremediation of heavy metal polluted soils. Combining both microorganisms and plants is an approach to bioremediation that ensures a more efficient clean-up of heavy metal polluted soils. However, success of this approach largely depends on the species of organisms involved in the process.

  8. Heavy Metal Contamination of Soils and Vegetation around Solid ...

    African Journals Online (AJOL)

    MICHAEL

    The mean concentrations of zinc in soil and vegetations along the transect ... wastes contributed to the levels of heavy metals in soils and vegetation. ...... Current Topics in Toxicology. Vol. ... seminar on collaborative Agricultural Research.

  9. Investigationof Clay Mineralogy, Micromorphology and Evolution of Soils in Bajestan Playa

    Directory of Open Access Journals (Sweden)

    Mohammad Ghasemzadeh Ganjehie

    2017-03-01

    Full Text Available Introduction: Playa is one of the most important landscapes in arid regions which covers about 1% of the world's total land area. Study of playas is important from different points of view especially pedology, sedimentology, mineralogy, environmental geology, groundwater and surface water chemistry. More than 60 playas have been identified in Iran. Considering the fact that playas and surrounding landforms are important archive of landscape evolution and paleoenvironmental variations, it seems that less attention has been paid to them so far. Soils are known as indicators of the landscapes evolution. Previous studies in arid regions of Iran imply different periods of deposition and soil formation in playa and alluvial fans or pediments. Bajestan playa is one of the known playa in northeastern Iran, and the largest clay flat exists in this playa. There is no information on the soils and their evolution in Bajestan playa. The objective of this study were to 1 identify the soils in different landforms along a transect from alluvial fan to clay in Bajestan playa 2 determine the morphological, micromorphological and mineralogical characteristics of these soils 3 determine the periods of soil and landform evolution and 4 comparison of soils evolution of the study area to other arid regions of Iran. Material and Methods: The study area of approximately 20000 hectares is located in southeastern of KhorasanRazavi province. The climate of the study area is hot and dry with mean annual temperature and rainfall of 17.3 °C and 193 mm, respectively. Soil moisture regime is aridic with subdivisions of weak aridic and soil temperature regime is thermic. Firstly, landforms and geomorphic surfaces of the study area were recognized based on Google Earth images interpretations and field observations. Four main landforms were recognized in the study area. The landforms from north to the south of the study area were alluvial fan, intermediate alluvial fan- clay flat

  10. The influence of heavy metals on soil microflora

    Directory of Open Access Journals (Sweden)

    Štyriaková Iveta

    2002-12-01

    Full Text Available The aim of our contribution was to ascertain an influence of heavy metals on quantitative and qualitative composition of soil microflora. Our experiment was directed to quantitative isolation of culturable bacteria from individual soil samples and to the comparison of the amounts and colony morphology of the isolates from various soil samples. These soil samples were characteristic by a difference in pH, heavy metals and humus contents. Despite the differences between individual soil samples, the most of bacterial isolates were represented by Bacillus genus (especially Bacillus cereus and Bacillus mycoides which belongs to the heavy metal resistant bacterial kinds.

  11. Heavy Metal Polluted Soils: Effect on Plants and Bioremediation Methods

    OpenAIRE

    Chibuike, G. U.; Obiora, S. C.

    2014-01-01

    Soils polluted with heavy metals have become common across the globe due to increase in geologic and anthropogenic activities. Plants growing on these soils show a reduction in growth, performance, and yield. Bioremediation is an effective method of treating heavy metal polluted soils. It is a widely accepted method that is mostly carried out in situ; hence it is suitable for the establishment/reestablishment of crops on treated soils. Microorganisms and plants employ different mechanisms for...

  12. Can corn plants inoculated with arbuscular mycorrhiza fungi affect soil clay assemblage?

    Science.gov (United States)

    Adamo, P.; Cozzolino, V.; Di Meo, V.; Velde, B.

    2012-04-01

    Plants can extract K from exchangeable and non-exchangeable sites in the soil clay mineral structures. The latter, known as fixed K, is usually seen as an illite layer, i.e. an anhydrous K layer that forms a 1.0 nm structural layer unit as seen by X-ray diffraction. Nutrient availability can be enhanced in the root zone by arbuscular mycorrhiza fungi. In this study, the effects of non-inoculated and Glomus intraradices inoculated corn plant growth under different experimental conditions on soil K-bearing clay minerals were identified. The soil, a Vertic Xerofluvent, was planted in corn in a 2008-2010 randomized field experiment. Bulk and rhizosphere soil sampling was carried out from May to September 2010 from fertilized plots (N200P90K160 and N200P0K160) with and without plants. According to XRD analysis, three major K-bearing minerals were present in soil: smectite-rich mixed layer mineral, illite-rich mixed layer mineral and illite. Results at 40DAS indicate extraction of K from clay minerals by plant uptake, whereas at 130DAS much of the nutrient seems to be returned to the soil. There is an apparent difference between bulk and rhizophere clays. The XRD patterns are not unequivocally affected by Glomus inoculation. There are observable changes in clay mineralogy in fallow unfertilized compared with fertilized soil. In the studied soil, the illite rich mixed-layer minerals seem to be the source of K absorbed by plants, while illite acts as sink of K released from the plant-microorganisms system at the end of the growing season and as source for the following crop.

  13. Clay-associated organic matter in kaolinitic and smectitic soils

    NARCIS (Netherlands)

    Wattel-Koekkoek, E.J.W.

    2002-01-01

    The primary source of soil organic matter is plant debris of all kinds, such as dead roots, leaves and branches that enter into the soil and are then biologically decomposed at variable rates. Organic matter has many different important functions on a local and global scale. Soil organic matter is a

  14. Clay-associated organic matter in kaolinitic and smectitic soils

    NARCIS (Netherlands)

    Wattel-Koekkoek, E.J.W.

    2002-01-01

    The primary source of soil organic matter is plant debris of all kinds, such as dead roots, leaves and branches that enter into the soil and are then biologically decomposed at variable rates. Organic matter has many different important functions on a local and global scale. Soil organic matter is a

  15. A comparison of heavy mineral assemblage between the loess and the Red Clay sequences on the Chinese Loess Plateau

    Science.gov (United States)

    Peng, Wenbin; Wang, Zhao; Song, Yougui; Pfaff, Katharina; Luo, Zeng; Nie, Junsheng; Chen, Wenhan

    2016-06-01

    QEMSCAN-based (Quantitative Evaluation of Minerals by Scanning Electron Microscopy) heavy mineral analysis has recently been demonstrated an efficient way to allow a rapid extraction of provenance information from sediments. However, one key issue to correctly obtain a provenance signal using this technique is to clearly separate effects of diagenetic alteration on heavy minerals in sediments, especially in fine-grained loess. Here we compare heavy mineral assemblages of bottom Quaternary loess (L33) and upper Pliocene Red Clay of three sites on the Chinese Loess Plateau (CLP). Two sites (Chaona and Luochuan) with similar modern climate conditions show similar heavy mineral assemblages but contain much less of the unstable heavy mineral amphibole than the drier Xifeng site. This result provides strong evidence supporting that climate-caused diagenesis is an important factor controlling heavy mineral assemblages of fine-grained loess. However, heavy mineral assemblages are similar for loess and paleosol layers deposited after 0.5 Ma on the Chinese Loess Plateau regardless of climate differences, suggesting that time is also a factor controlling heavy mineral assemblages of loess and Red Clay. Our high resolution sampling of the upper Miocene-Pliocene Chaona Red Clay sequence reveals similar heavy mineral compositions with a minor amphibole content, different from the drier Xifeng site results of the same age. This result indicates that the monsoonal climate pattern might have been maintained since the late Miocene. Furthermore, it indicates that the heavy mineral method is promising in tracing provenance for sites northwest of the Xifeng site on the Loess Plateau.

  16. Adsorption of chloroacetanilide herbicides on soil and its components Ⅲ. Influence of clay acidity, humic acid coating and herbicide structure on acetanilide herbicide adsorption on homoionic clays

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Adsorption of chloroacetanilide herbicides on homoionic montmorillonite, soil humic acid, and their mixtures was studied by coupling batch equilibration and FT-IR analysis. Adsorption isotherms of acetochlor, alachlor, metolachlor and propachlor on Ca2 + -, Mg2 + -. Al3 + -and Fe3 + -saturated clays were well described by the Freundlich equation. Regardless of the type of exchange cations, Kf decreased in the order of metolachlor > acetolachlor > alachlor > propachlor on the same clay. FT-IR spectra showed that the carbonyl group of the herbicide molecule was involved in binding, probably via H-bond with water molecules in the clay interlayer. The type and position of substitutions around the carbonyl group may have affected the electronegativity of oxygen, thus influencing the relative adsorption of these herbicides. For the same herbicide, adsorption on clay increased in the order of Mg2+ < Ca2+ < Al3+ ≤ Fe3+ which coincided with the iucreasing aciditv of homoionic clays. Acidity of cations may have affected the protonation of water, and thus the strength of H-bond between the clay water and herbicide. Complexation of clay and humic acid resulted in less adsorption than that expected from independent adsorption by the individual constituents. The effect varied with herbicides, but the greatest decrease in adsorption occurred at a 60:40 clay-to-humic acid ratio for all the herbicides. Causes for the decreased adsorption need to be characterized to better understand adsorption mechanisms and predict adsorption from soil compositions.

  17. Heavy metal-immobilizing organoclay facilitates polycyclic aromatic hydrocarbon biodegradation in mixed-contaminated soil.

    Science.gov (United States)

    Biswas, Bhabananda; Sarkar, Binoy; Mandal, Asit; Naidu, Ravi

    2015-11-15

    Soils contaminated with a mixture of heavy metals and polycyclic aromatic hydrocarbons (PAHs) pose toxic metal stress to native PAH-degrading microorganisms. Adsorbents such as clay and modified clay minerals can bind the metal and reduce its toxicity to microorganisms. However, in a mixed-contaminated soil, an adsorption process more specific to the metals without affecting the bioavailability of PAHs is desired for effective degradation. Furthermore, the adsorbent should enhance the viability of PAH-degrading microorganisms. A metal-immobilizing organoclay (Arquad(®) 2HT-75-bentonite treated with palmitic acid) (MIOC) able to reduce metal (cadmium (Cd)) toxicity and enhance PAH (phenanthrene) biodegradation was developed and characterized in this study. The MIOC differed considerably from the parent clay in terms of its ability to reduce metal toxicity (MIOC>unmodified bentonite>Arquad-bentonite). The MIOC variably increased the microbial count (10-43%) as well as activities (respiration 3-44%; enzymatic activities up to 68%), and simultaneously maintained phenanthrene in bioavailable form in a Cd-phenanthrene mixed-contaminated soil over a 21-day incubation period. This study may lead to a new MIOC-assisted bioremediation technique for PAHs in mixed-contaminated soils.

  18. Characterization of clay deposits from Egypt and assessment of their potential application for waste water treatment: How dissolved organic matter determines the interaction of heavy metals and clay minerals

    NARCIS (Netherlands)

    Refaey Mohammed, Y.B.

    2016-01-01

    The main aim of this study was to investigate the potential of using clay minerals abundant in local soils in Egypt as low cost materials to reduce Cu, Ni and Zn pollution of soil and groundwater originating from polluted wastewater; specifically focusing on the influence of the interaction of clay

  19. The effect of bottom sediment supplement on heavy metals content in plants (Zea mays and soil

    Directory of Open Access Journals (Sweden)

    Baran A.

    2013-04-01

    Full Text Available Important aspect of bottom sediments is the problem of their management or disposal after their extraction from the bottom of rivers, dam reservoirs, ports, channels or ponds. The research aimed at an assessment of potential environmental management of bottom sediment used as an admixture to light soil basing on its effect on contents of heavy metals in plants and soil. The research was conducted on light soil with granulometric structure of weakly loamy sand. The bottom sediment was added to light soil in the amount of 0 (control 5, 10, 30 i 50%. The test plant was maize (Zea mays, “Bora” c.v. The sediment applied in the presented research revealed high share of silt and clay fractions, alkaline pH and low contents of heavy metals, therefore it may be used as an admixture to the above mentioned soils to improve their productivity. The applied bottom sediment to the soil affected a decreased in Zn, Cd and Pb content in maize in comparison with the treatment without the deposit whereas increased content of Cu, Cr and Ni. No exceeded permissible content of heavy metals concerning plant assessment in view of their forage usability were registered in maize biomass.

  20. Heavy metal pollution decreases microbial abundance, diversity and activity within particle-size fractions of a paddy soil.

    Science.gov (United States)

    Chen, Junhui; He, Feng; Zhang, Xuhui; Sun, Xuan; Zheng, Jufeng; Zheng, Jinwei

    2014-01-01

    Chemical and microbial characterisations of particle-size fractions (PSFs) from a rice paddy soil subjected to long-term heavy metal pollution (P) and nonpolluted (NP) soil were performed to investigate whether the distribution of heavy metals (Cd, Cu, Pb and Zn) regulates microbial community activity, abundance and diversity at the microenvironment scale. The soils were physically fractionated into coarse sand, fine sand, silt and clay fractions. Long-term heavy metal pollution notably decreased soil basal respiration (a measurement of the total activity of the soil microbial community) and microbial biomass carbon (MBC) across the fractions by 3-45% and 21-53%, respectively. The coarse sand fraction was more affected by pollution than the clay fraction and displayed a significantly lower MBC content and respiration and dehydrogenase activity compared with the nonpolluted soils. The abundances and diversities of bacteria were less affected within the PSFs under pollution. However, significant decreases in the abundances and diversities of fungi were noted, which may have strongly contributed to the decrease in MBC. Sequencing of denaturing gradient gel electrophoresis bands revealed that the groups Acidobacteria, Ascomycota and Chytridiomycota were clearly inhibited under pollution. Our findings suggest that long-term heavy metal pollution decreased the microbial biomass, activity and diversity in PSFs, particularly in the large-size fractions.

  1. THE EFFECT OF REINFORCEMENT ON THE GBFS AND LIME TREATED MARINE CLAY FOR FOUNDATION SOIL BEDS

    Directory of Open Access Journals (Sweden)

    D. Koteswara Rao,

    2011-03-01

    Full Text Available India being peninsular country has large area coming under coastal region and also it has been the habitat for considerable percentage of population. The marine clays are generally found in the coastal region of West Bengal, Orissa, Andhra Pradesh, Tamilnadu, Kerala, Karnataka, Maharashtra and some parts of Gujarat. Marine or soft clays exists in these region are weak and deformative in nature. The present study deals with the strength characteristics of the marine clay collected from Kakinada Sea Port Ltd, Kakinada, A.P, India. The effect of lime on the strength characteristics of marine clay are studied in this investigation along with the reinforcement effect using geotextile as reinforcement and separator for the foundation soil bed.

  2. HEAVY METAL LOADS IN THE SOIL OF DEBRECEN

    Directory of Open Access Journals (Sweden)

    SÁNDOR SZEGEDI

    2007-12-01

    Full Text Available Results of examinations on the amount, and spatial distribution of heavy metal compounds in the soil of Debrecen, their geographic, pedologic and ecologic aspects are presented in this study. The effects of the differences in traffic conditions, build-up/land use and the density of vegetation on the heavy metal content of the soils have been examined in city of Debrecen and its closer environment.Cadmium-, cobalt-, nickel-, lead-, and copper-contents of the soil samples taken from 88 sites of the sample area have been studied after acidic extraction, using atomic absorption spectrometer with the flame technique. Close-to-background concentrations of heavy metals in unpolluted soils of the forested area of the Nagyerd were determined. Spatial differences in the heavy metal content of the soils for the whole area of Debrecen have been studied. Influence of soil properties (humus, Calcium- Carbonate content, pH and grain-size distribution on the binding and mobility of heavy metals in the soil has been examined. Vertical distribution and mobility of heavy metal compounds in acid sandy soils was determined. Heavy metal content of soil in the most sensitive areas, playgrounds, recreational areas, urban gardens and grazing fields along busy roads has been surveyed.

  3. Freeze-Thaw Cycles Effects on Soil Compaction in a Clay Loam

    Science.gov (United States)

    Jabro, J.; Evans, R.; Iversen, W.

    2012-04-01

    Inappropriate soil management practices and heavier farm machinery and equipment have led to an increase in soil compaction in the last two decades prompting increased global concern regarding the impact of soil compaction on crop production and soil quality in modern mechanized agriculture. A 3-yr comprehensive study was established to evaluate the dynamic of freeze-thaw cycles on soil compaction in a clay loam soil. Plots of frozen soils were compared with plots where soils were prevented from freezing with electrically heated blankets commonly used on concrete. Results showed that frequent freeze-thaw cycles over the winter alleviated a majority of soil compaction at the 0 - 20 cm depth. Soil penetration resistance in compacted soils was reduced by 73 and 68% over the winter at the 0 - 10 and 10 - 20 cm depths, respectively, due to dynamic effects of freeze-thaw cycles on soil structure and particles configuration. In unfrozen compacted soils, the penetration resistance was also reduced by 50 and 60% over winter at the 0 - 10 and 10 - 20 cm depths, respectively, due to the biology of soil, microbial activity, and disruptive effects of shrink-swell cycles. These results have demonstrated of how repeated freeze-thaw cycles can alleviate soil compaction, alter soil physical quality and create optimal soil conditions required for profitable growth of agricultural crops. The results from this study will save growers considerable time, money and energy currently required to alleviate soil compaction using other methods such as sub-soiling and deep tillage. We believe that Mother Nature provides ways to reverse soil compaction and improve soil structure and aggregation through the dynamic of freeze-thaw cycles that soils in Montana and other parts of the country go through each year. We concluded that the Mother Nature is the most effective and cheapest way to alleviate soil compaction.

  4. Modeling Air Permeability in Variably Saturated Soil from Two Natural Clay Gradients

    DEFF Research Database (Denmark)

    Chamindu, Deepagoda T K K; Arthur, Emmanuel; Møldrup, Per

    2013-01-01

    Understanding soil–gas phase properties and processes is important for finding solutions to critical environmental problems such as greenhouse gas emissions and transport of gaseous-phase contaminants in soils. Soil–air permeability, ka (μm2), is the key parameter governing advective gas movement...... in soil and is controlled by soil physical characteristics representing soil texture and structure. Models predicting ka as a function of air-filled porosity (ɛ) often use a reference-point measurement, for example, ka,1000 at ɛ1000 (where the measurement is done at a suction of –1000 cm H2O). Using ka...... measurements from two Danish arable fields, each located on natural clay gradients, this study presents a pore tortuosity–disconnectivity analysis to characterize the soil–gas phase. The main objective of this study is to investigate the effect of soil–moisture condition, clay content, and other potential...

  5. Plants Role in Reducing Heavy Metals from Polluted Soil Leachate

    OpenAIRE

    Amouei A.1 PhD,; Tashakkorian H.1 PhD,; Naghipour D.2 PhD,; Mohammadi P.3 MSc

    2015-01-01

    Aims In the past few decades, more attention has been paid to clean up soils polluted with heavy metals by plants. A serious problem in this way is the amount of heavy metals uptake by plants. This study was conducted to evaluate the effectiveness of 3 local plants of Mazandaran province, Iran, in reducing and controlling the soil’s heavy metals. Instrument & Methods The removal amount of three heavy metals (lead, zinc and cadmium) by native plants (maize, velvetleaf and wild a...

  6. Effects of clay amendment on adsorption and desorption of copper in water repellent soils

    NARCIS (Netherlands)

    Xiong, X.; Stagnitti, F.; Allinson, G.; Turoczy, N.; Li, P.; LeBlanc, M.; Cann, M.A.; Doerr, S.H.; Steenhuis, M.M.; Parlange, J.Y.; Rooij, de G.; Ritsema, C.J.; Dekker, L.W.

    2005-01-01

    Copper is an important micronutrient and trace amounts are essential for crop growth. However, high concentrations of copper will produce toxic effects. Australia is increasingly developing production of crops in water repellent soils. Clay amendment, a common amelioration techniques used in Austral

  7. Peculiarities of strength and deformability properties of clay soils in districts of Western Siberia

    Science.gov (United States)

    Efimenko, Sergey; Efimenko, Vladimir; Sukhorukov, Alexey

    2016-01-01

    The article demonstrates the methodology of the substantiation of the calculated values of moisture, strength, and deformability characteristics of clay subgrade soils for the design of pavements by strength conditions in II, III, and IV road-climatic zones in West Siberia. The main purpose of the work is to ensure the quality of the design of roads in newly developed regions of Russia. To achieve this goal the following problems have been solved: the dislocation of boundary lines of road-climatic zones has been specified, zoning of the investigated territory for the design of roads has been detailed; regularities of changes in strength and deformability characteristics of clay subgrade soils of their moisture have been established; the territorial normalization of the calculated values of moisture, strength, and deformability of clay subgrade soils in relation to the allocated road districts has been carried out. Specification of boundary lines of road-climatic zones has been implemented on the basis of the taxonomic system "zone-subzone-road district". The calculated values of moisture, strength, and deformability characteristics of clay soils, established and differentiated according to road-climatic zones, will ensure the required level of the reliability of transport infrastructure facilities during the life cycle of roads.

  8. Modeling selenite adsorption envelopes on oxides, clay minerals, and soils using the triple layer model

    Science.gov (United States)

    Selenite adsorption behavior was investigated on amorphous aluminum and iron oxides, clay minerals: kaolinite, montmorillonite, and illite, and 45 surface and subsurface soil samples from the Southwestern and Midwestern regions of the USA as a function of solution pH. Selenite adsorption decreased ...

  9. Modeling selenate adsorption behavior on oxides, clay minerals, and soils using the triple layer model

    Science.gov (United States)

    Selenate adsorption behavior was investigated on amorphous aluminum oxide, amorphous iron oxide, goethite, clay minerals: kaolinites, montmorillonites, illite, and 18 soil samples from Hawaii, and the Southwestern and the Midwestern regions of the US as a function of solution pH. Selenate adsorpti...

  10. Simulation of pesticide leaching in a cracking clay soil with the PEARL model

    NARCIS (Netherlands)

    Scorza, R.P.; Boesten, J.J.T.I.

    2005-01-01

    Testing of pesticide leaching models is important to increase confidence in their use in pesticide registration procedures world-wide. The chromatographic PEARL model was tested against the results of a field leaching study on a cracking clay soil with a tracer (bromide), a mobile pesticide (bentazo

  11. The mechanical stability of clay soils as influenced by the moisture conditions and some other factors

    NARCIS (Netherlands)

    Koenigs, F.F.R.

    1961-01-01

    To test whether flocculation is a prerequisite for granulation and a waterstable structure or whether drying (close contact) is sufficient, homoionic suspensions were prepared from pure sodium, potassium, calcium or magnesium montmorillonite, illite or kaolinite and from the respective soil clays.

  12. Ten-Year Growth of Five Planted Hardwood Species Mechanical Weed Control on Sharkey Clay Soil

    Science.gov (United States)

    Roger M. Krinard; Harvey E. Kennedy

    1983-01-01

    Five hardwood species planted on Sharkey clay soil showed little practical difference in growth whether plots were mowed or diskedfor weed control in years 6 to 10, although disking had given better growth in the first 5 years. After 10 years, cottonwood (Populus deltoides Bartr. ex Marsh.) stem volume was at least three times greater than other species. Changes in...

  13. Crystal structure control of aluminized clay minerals on the mobility of caesium in contaminated soil environments.

    Science.gov (United States)

    Dzene, Liva; Ferrage, Eric; Viennet, Jean-Christophe; Tertre, Emmanuel; Hubert, Fabien

    2017-02-24

    Radioactive caesium pollution resulting from Fukushima Dai-ichi and Chernobyl nuclear plant accidents involves strong interactions between Cs(+) and clays, especially vermiculite-type minerals. In acidic soil environments, such as in Fukushima area, vermiculite is subjected to weathering processes, resulting in aluminization. The crystal structure of aluminized clays and its implications for Cs(+) mobility in soils remain poorly understood due to the mixture of these minerals with other clays and organic matter. We performed acidic weathering of a vermiculite to mimic the aluminization process in soils. Combination of structure analysis and Cs(+) extractability measurements show that the increase of aluminization is accompanied by an increase in Cs(+) mobility. Crystal structure model for aluminized vermiculite is based on the interstratification of unaltered vermiculite layers and aluminized layers within the same particle. Cs(+) in vermiculite layers is poorly mobile, while the extractability of Cs(+) is greatly enhanced in aluminized layers. The overall reactivity of the weathered clay (cation exchange capacity, Cs(+) mobility) is then governed by the relative abundance of the two types of layers. The proposed layer model for aluminized vermiculite with two coexisting populations of caesium is of prime importance for predicting the fate of caesium in contaminated soil environments.

  14. Crystal structure control of aluminized clay minerals on the mobility of caesium in contaminated soil environments

    Science.gov (United States)

    Dzene, Liva; Ferrage, Eric; Viennet, Jean-Christophe; Tertre, Emmanuel; Hubert, Fabien

    2017-01-01

    Radioactive caesium pollution resulting from Fukushima Dai-ichi and Chernobyl nuclear plant accidents involves strong interactions between Cs+ and clays, especially vermiculite-type minerals. In acidic soil environments, such as in Fukushima area, vermiculite is subjected to weathering processes, resulting in aluminization. The crystal structure of aluminized clays and its implications for Cs+ mobility in soils remain poorly understood due to the mixture of these minerals with other clays and organic matter. We performed acidic weathering of a vermiculite to mimic the aluminization process in soils. Combination of structure analysis and Cs+ extractability measurements show that the increase of aluminization is accompanied by an increase in Cs+ mobility. Crystal structure model for aluminized vermiculite is based on the interstratification of unaltered vermiculite layers and aluminized layers within the same particle. Cs+ in vermiculite layers is poorly mobile, while the extractability of Cs+ is greatly enhanced in aluminized layers. The overall reactivity of the weathered clay (cation exchange capacity, Cs+ mobility) is then governed by the relative abundance of the two types of layers. The proposed layer model for aluminized vermiculite with two coexisting populations of caesium is of prime importance for predicting the fate of caesium in contaminated soil environments. PMID:28233805

  15. Evaluation of Water Vapor Sorption Hysteresis in Soils: The Role of Organic Matter and Clay

    DEFF Research Database (Denmark)

    Arthur, Emmanuel; Tuller, Markus; Moldrup, Per

    2015-01-01

    hysteresis and hysteresis was dependent on the degree of interlayer expansion, where kaolinite exhibited little hysteresis and montmorillonite showed significant hysteresis between the sorption isotherms. For soils, clay and OM effects on hysteresis depended on the method used for quantifying hysteresis...

  16. Crystal structure control of aluminized clay minerals on the mobility of caesium in contaminated soil environments

    Science.gov (United States)

    Dzene, Liva; Ferrage, Eric; Viennet, Jean-Christophe; Tertre, Emmanuel; Hubert, Fabien

    2017-02-01

    Radioactive caesium pollution resulting from Fukushima Dai-ichi and Chernobyl nuclear plant accidents involves strong interactions between Cs+ and clays, especially vermiculite-type minerals. In acidic soil environments, such as in Fukushima area, vermiculite is subjected to weathering processes, resulting in aluminization. The crystal structure of aluminized clays and its implications for Cs+ mobility in soils remain poorly understood due to the mixture of these minerals with other clays and organic matter. We performed acidic weathering of a vermiculite to mimic the aluminization process in soils. Combination of structure analysis and Cs+ extractability measurements show that the increase of aluminization is accompanied by an increase in Cs+ mobility. Crystal structure model for aluminized vermiculite is based on the interstratification of unaltered vermiculite layers and aluminized layers within the same particle. Cs+ in vermiculite layers is poorly mobile, while the extractability of Cs+ is greatly enhanced in aluminized layers. The overall reactivity of the weathered clay (cation exchange capacity, Cs+ mobility) is then governed by the relative abundance of the two types of layers. The proposed layer model for aluminized vermiculite with two coexisting populations of caesium is of prime importance for predicting the fate of caesium in contaminated soil environments.

  17. Effect of exchangeable Mg on saturated hydraulic conductivity, disaggregation and clay dispersion of disturbed soils

    Science.gov (United States)

    Zhang, X. C.; Norton, L. D.

    2002-03-01

    Different opinions exist regarding the specific effect of Mg on soil physical and chemical properties. We hypothesized that Mg 2+, compared with Ca 2+, reduces saturated hydraulic conductivity ( Ks) via promoting clay swelling, disaggregation, and clay dispersion. Two soils (mixed, mesic Typic Hapludalfs) in packed soil columns were leached with either Ca- or Mg-containing solutions at the successive concentrations of 250, 10, 2, 0.5, and 0 mM. Critical flocculation concentration (CFC) in either Ca or Mg systems was determined with flocculation series tests. Aggregate stability and mean weight diameter (MWD) were assessed by wet-sieving. The CFCs were higher in Mg than in Ca for both soils, indicating that Mg is more dispersive than Ca. The MWDs measured using 1-2 mm aggregates of both soils were significantly larger for Ca-soils than for Mg-soils ( P=0.05). The Ksr (normalized with initial Ks) started to decline at higher concentrations for Mg than for Ca, and the reduction was much greater in Mg than in Ca above 0.5 mM. The Ksr and percent transmittance (inversely related to turbidity) of leachate at a given eluted pore volume following 'steady state' were higher in Ca than in Mg for both soils ( P=0.1), indicating lower permeability and more clay dispersion with the Mg treatment. Swelling and disaggregation, which reduced large pores, appeared to be the dominant process causing the rapid initial decline of Ksr. Clay dispersion and subsequent pore plugging became progressively important when electrolyte concentration was reduced to below CFCs.

  18. [Occurrence relationship between iron minerals and clay minerals in net-like red soils: evidence from X-ray diffraction].

    Science.gov (United States)

    Yin, Ke; Hong, Han-Lie; Han, Weni; Ma, Yu-Bo; Li, Rong-Biao

    2013-04-01

    The high purity of clay minerals is a key factor to reconstruct the palaeoclimate in clay mineralogy, however, the existence of iron minerals (such as goethite and hematite) and organics lead to the intergrowth of clay minerals and other minerals, producing other mineral impurities in enriched clay minerals. Although the removal of organics in soil sediments has been fully investigated, the occurrence state of iron minerals remains controversial, hindering the preparation of high-purity clay minerals. Therefore, the occurrence relationship of iron minerals and clay minerals in Jiujiang net-like red soils of the middle to lower reaches of the Yangtze River was investigated using the sequential separation method, which provided some implications for the removal of iron minerals in soil sediments. The results indicated that goethite and hematite were mostly absorbed on the surface of hydroxy-interlayered smectite and illite in the form of films, and the rest were absorbed by kaolinite.

  19. Multisensor on-the-go mapping of readily dispersible clay, particle size and soil organic matter

    Science.gov (United States)

    Debaene, Guillaume; Niedźwiecki, Jacek; Papierowska, Ewa

    2016-04-01

    Particle size fractions affect strongly the physical and chemical properties of soil. Readily dispersible clay (RDC) is the part of the clay fraction in soils that is easily or potentially dispersible in water when small amounts of mechanical energy are applied to soil. The amount of RDC in the soil is of significant importance for agriculture and environment because clay dispersion is a cause of poor soil stability in water which in turn contributes to soil erodibility, mud flows, and cementation. To obtain a detailed map of soil texture, many samples are needed. Moreover, RDC determination is time consuming. The use of a mobile visible and near-infrared (VIS-NIR) platform is proposed here to map those soil properties and obtain the first detailed map of RDC at field level. Soil properties prediction was based on calibration model developed with 10 representative samples selected by a fuzzy logic algorithm. Calibration samples were analysed for soil texture (clay, silt and sand), RDC and soil organic carbon (SOC) using conventional wet chemistry analysis. Moreover, the Veris mobile sensor platform is also collecting electrical conductivity (EC) data (deep and shallow), and soil temperature. These auxiliary data were combined with VIS-NIR measurement (data fusion) to improve prediction results. EC maps were also produced to help understanding RDC data. The resulting maps were visually compared with an orthophotography of the field taken at the beginning of the plant growing season. Models were developed with partial least square regression (PLSR) and support vector machine regression (SVMR). There were no significant differences between calibration using PLSR or SVMR. Nevertheless, the best models were obtained with PLSR and standard normal variate (SNV) pretreatment and the fusion with deep EC data (e.g. for RDC and clay content: RMSECV = 0,35% and R2 = 0,71; RMSECV = 0,32% and R2 = 0,73 respectively). The best models were used to predict soil properties from the

  20. Rapid Stabilization/Polymerization of Wet Clay Soils; Literature Review

    Science.gov (United States)

    2009-01-15

    Conference, 182- 193. 70. Heller, H. and Keren, R. (2002). "Anionic Polyacrylamide Polymers Effect on Rheological Behavior of Sodium-Montmorillonite...34 Engineering Geology, 44(1-4), 107-120. 198. Zaitoun, A. and Berton, N. (1996). "Stabilization of Montmorillonite Clay in Porous Media by Polyacrylamides ."SPE...Rate Secondary Additive Secondary Rate Raub silty loam N/A Starch graft polymer Solid 0.04, 0.1, and 0.4% N/A N/A Fincastle silty loam N/A

  1. Process for the demetallization and hydroconversion of heavy crudes and residues using a natural clay catalyst

    Energy Technology Data Exchange (ETDEWEB)

    Sepulveda, G.; Rosa-Brussin, M.; Carrion, N.; Roa, P.; Ruiz, A.M.; Guitian, J.; Rodriguez, O.; Zerpa, C.

    1986-09-23

    A process is described for the hydrodemetallization and hydroconversion of a heavy hydrocarbon charge characterized by a nickel content of more than 100 ppm, a vanadium content of more than 100 ppm. a sulfur content of more than 2% and an asphaltene content of more than 8% comprising providing a natural catalyst. This catalyst is formed by treating a naturally occurring clay having the following composition based on total dry weight: Fe/sub 2/O/sub 3/ 3.0 to 10.0 wt.%, SiO/sub 2/ 40 to 75 wt. %, Al/sub 2/O/sub 3/ 10 to 25wt.%, MgO 0.1 to 0.8 wt. %, K/sub 2/O 0.3 to 2.6 wt. % and Na/sub 2/O 0.1 to 1.5 wt. % in an acid bath so as to obtain a catalyst characterized by a highly dispersed iron content on the surface thereof. The catalyst has a chemical composition comprising 2 to 10 wt. % Fe/sub 2/O/sub 3/, 40 to 80 wt. % SiO/sub 2/ and 8 to 25 wt % Al/sub 2/O/sub 3/ and an iron surface composition measured by XPS techniques is in a ratio of from about I(Fe)/I(Si+Al) of between 0.2 to 0.9. This subjects the catalyst to hydrogen stream reduction at a temperature of between 300/sup 0/ and 500/sup 0/C. for 1 hour at a hydrogen pressure of between 500 and 3500 psig, pre-sulfurizing the catalyst with a substance selected from the group consisting of H/sub 2/S/H/sub 2/ and CS/sub 2//gas oil and contacting the heavy hydrocarbon charge with the catalyst in a zone in the presence of hydrogen so as to convert the heavy hydrocarbon charge into a light hydrocarbon.

  2. Distinguishing black carbon from biogenic humic substances in soil clay fractions

    Science.gov (United States)

    Laird, D.A.; Chappell, M.A.; Martens, D.A.; Wershaw, R. L.; Thompson, M.

    2008-01-01

    Most models of soil humic substances include a substantial component of aromatic C either as the backbone of humic heteropolymers or as a significant component of supramolecular aggregates of degraded biopolymers. We physically separated coarse (0.2-2.0????m e.s.d.), medium (0.02-0.2????m e.s.d.), and fine (> 0.02????m e.s.d.) clay subfractions from three Midwestern soils and characterized the organic material associated with these subfractions using 13C-CPMAS-NMR, DTG, SEM-EDX, incubations, and radiocarbon age. Most of the C in the coarse clay subfraction was present as discrete particles (0.2-5????m as seen in SEM images) of black carbon (BC) and consisted of approximately 60% aromatic C, with the remainder being a mixture of aliphatic, anomeric and carboxylic C. We hypothesize that BC particles were originally charcoal formed during prairie fires. As the BC particles aged in soil their surfaces were oxidized to form carboxylic groups and anomeric and aliphatic C accumulated in the BC particles either by adsorption of dissolved biogenic compounds from the soil solution or by direct deposition of biogenic materials from microbes living within the BC particles. The biogenic soil organic matter was physically separated with the medium and fine clay subfractions and was dominated by aliphatic, anomeric, and carboxylic C. The results indicate that the biogenic humic materials in our soils have little aromatic C, which is inconsistent with the traditional heteropolymer model of humic substances.

  3. Assessment of Fate of Thiodicarb Pesticide in Sandy Clay Loam Soil

    Directory of Open Access Journals (Sweden)

    M. A. Bajeer

    2015-06-01

    Full Text Available In present study the fate of thiodicarb pesticide in sandy clay loam soil was investigated through its adsorption and leaching using HPLC. Experimental results revealed that thiodicarb follows first order kinetic with rate constant value of 0.711 h-1 and equilibrium study showed that Freundlich model was best fitted with multilayer adsorption capacity 3.749 mol/g and adsorption intensity 1.009. Therefore, adsorption of thiodicarb was multilayer, reversible and non-ideal. Leaching study has indicated intermediate mobility of thiodicarb with water due to its solubility, while field study showed the non-leacher nature. However both adsorption and leaching were heavily affected by soil characteristics. As the soil taken was sandy clay loam hence due to clay texture adsorption was higher because of vacant sites existing and greater surface area. For this the pesticide has remained adsorbed in above 20 cm soil layer as clearly seen from field study, minor amount was recorded in third layer of soil having 21-30 cm depth. The leached amount of thiodicarb in first and last part of water was 1.075 and 0.003 ng/µl. The general trend observed for adsorption in column and field soil was decreased downwards from 2.027 to 0.618 and 5.079 to 0.009 ng/µl.

  4. Electrokinetic movement of hexachlorobenzene in clayed soils enhanced by Tween 80 and beta-cyclodextrin.

    Science.gov (United States)

    Yuan, Songhu; Tian, Meng; Lu, Xiaohua

    2006-09-21

    This study describes the comparative behavior of hexachlorobenzene (HCB) contaminated clayed soils in an electrokinetic (EK) system enhanced by Tween 80 and beta-cyclodextrin (beta-CD). The pH of the soils was controlled by Na2CO3/NaHCO3 buffer. Negligible HCB movement was observed when NaOH or Na2CO3/NaHCO3 buffer was used as anodic flushing solution. While Tween 80 or beta-CD was introduced to Na2CO3/NaHCO3 buffer, obvious HCB movement was achieved. Although beta-CD led to a less desorption of HCB from kaolin than Tween 80, the removal of HCB with beta-CD was much higher than that with Tween 80 in the EK system. Tween 80 could be sorped by kaolin more than beta-CD, which was responsible for the result. The mechanism of the movement of HCB was proposed as the enhanced desorption of HCB from soil, the dissolving of HCB in the soil pore fluid and the movement of HCB with the electroosmotic flow. Obvious movement of HCB was also observed in the EK treatment of real HCB-contaminated clayed soil enhanced by beta-CD. It is an alternative approach to use facilitating agents such as beta-CD to enhance the EK movement of HCB in the contaminated clayed soils.

  5. Effects of iron and aluminum oxides and clay content on penetration resistance of five Greek soils

    Directory of Open Access Journals (Sweden)

    Stefanos Stefanou

    2013-07-01

    Full Text Available The effect of amorphous and crystalline iron (Fe and aluminum (Al oxides and oxy-hydroxides as well as clay on soil penetration resistance of five Greek soils, as a function of soil water suction was studied for the whole range of soil moisture. The soils tested were of loamy texture and were collected from cultivated and non-cultivated areas of north and central Greece (Macedonia and Thessaly. The study aimed at understanding the role of the above mentioned soil components on penetration resistance. The findings showed that the increase of iron and aluminum oxides and oxy-hydroxides content resulted in an increase of soil penetration resistance and the relationships between them were significant. Crystalline iron forms found to have a more profound effect on penetration resistance as compared to amorphous iron forms. Finally, positive and significant relationships were also found between penetration resistance and clay content. However, it is not entirely clear which of the two soil components plays the most important role in penetration resistance changes in soils.

  6. Effect of clay minerals and nanoparticles on chromium fractionation in soil contaminated with leather factory waste.

    Science.gov (United States)

    Taghipour, Marzieh; Jalali, Mohsen

    2015-10-30

    This study was conducted to investigate the effect of time, clay minerals and nanoparticles (NPs) on chromium (Cr) fractionation in a soil contaminated with leather factory waste (LFW). Soil was mixed with LFW, then, the contaminated soils were treated with clay minerals (bentonite and zeolite) and nanoparticles (MgO, TiO2 and ZnO) at 5% and 1%, respectively. The samples were incubated for 15-180 days at 25 °C and constant moisture. After incubation, Cr in control and treated soils was fractionated by the sequential extraction procedure. The distribution of various Cr fractions in control soil indicated that the greatest amounts of Cr were found in the residual fraction (RES) followed by the carbonate (CAR), organic matter (OM) and exchangeable (EXC) fractions. The addition of LFW in soils increased Cr concentration in all fractions. The higher proportion of EXC fraction in the soil treated with LFW indicates its higher potential of leaching and runoff transport. In all treated soils, the RES fraction was increased, while EXC and OM fractions were decreased during incubation. The results indicated that NPs are effective adsorbent for the removal of Cr ions from LFW treated soil, and they could be useful in reducing their environment risk.

  7. Changes in soil properties and plant uptake of heavy metals on ...

    African Journals Online (AJOL)

    Administrator

    Full Length Research Paper. Changes in soil ... In a study to evaluate the contributions of open municipal waste dump to soil heavy metals ... Key words: Heavy metal contamination, seasonal changes, soil pH, soil texture, specific adsorption.

  8. Heavy metal-immobilizing organoclay facilitates polycyclic aromatic hydrocarbon biodegradation in mixed-contaminated soil

    Energy Technology Data Exchange (ETDEWEB)

    Biswas, Bhabananda; Sarkar, Binoy [Centre for Environmental Risk Assessment and Remediation, University of South Australia, Mawson Lakes Campus, SA 5095 (Australia); Cooperative Research Centre for Contamination Assessment and Remediation of the Environment, P.O. Box 486, Salisbury, SA 5106 (Australia); Mandal, Asit [Centre for Environmental Risk Assessment and Remediation, University of South Australia, Mawson Lakes Campus, SA 5095 (Australia); Division of Soil Biology, Indian Institute of Soil Science, Bhopal, Madhya Pradesh (India); Naidu, Ravi [Centre for Environmental Risk Assessment and Remediation, University of South Australia, Mawson Lakes Campus, SA 5095 (Australia); Cooperative Research Centre for Contamination Assessment and Remediation of the Environment, P.O. Box 486, Salisbury, SA 5106 (Australia)

    2015-11-15

    Highlights: • A novel metal-immobilizing organoclay (MIOC) synthesized and characterized. • MIOC immobilizes toxic metals and reduces metal bioavailability. • It enhances PAH-bioavailability to soil bacteria. • It improves microbial growth and activities in mixed-contaminated soils. • MIOC facilitates PAH-biodegradation in metal co-contaminated soils. - Abstract: Soils contaminated with a mixture of heavy metals and polycyclic aromatic hydrocarbons (PAHs) pose toxic metal stress to native PAH-degrading microorganisms. Adsorbents such as clay and modified clay minerals can bind the metal and reduce its toxicity to microorganisms. However, in a mixed-contaminated soil, an adsorption process more specific to the metals without affecting the bioavailability of PAHs is desired for effective degradation. Furthermore, the adsorbent should enhance the viability of PAH-degrading microorganisms. A metal-immobilizing organoclay (Arquad{sup ®} 2HT-75-bentonite treated with palmitic acid) (MIOC) able to reduce metal (cadmium (Cd)) toxicity and enhance PAH (phenanthrene) biodegradation was developed and characterized in this study. The MIOC differed considerably from the parent clay in terms of its ability to reduce metal toxicity (MIOC > unmodified bentonite > Arquad–bentonite). The MIOC variably increased the microbial count (10–43%) as well as activities (respiration 3–44%; enzymatic activities up to 68%), and simultaneously maintained phenanthrene in bioavailable form in a Cd-phenanthrene mixed-contaminated soil over a 21-day incubation period. This study may lead to a new MIOC-assisted bioremediation technique for PAHs in mixed-contaminated soils.

  9. Experimental Study of the Selective Adsorption of Heavy Metals onto Clay Minerals

    Institute of Scientific and Technical Information of China (English)

    何宏平; 郭九皋; 等

    2000-01-01

    The interaction between minerals and heavy metals has been a hot object of study in environmental science,mineralogy and soil science,Through the selective adsorption experiment of Ca-montomorillonite,illite and kaolinite to Cu2+,Pb2+,Zn2+,Cd2+,and Cr3+ ions at certain conditions,it could be concluded that Cr3+ is most effectively sorbed by all the three minerals.Also,it can be found that Pb2+ shows a strong affinity for illite and kaolinite while cu2+ for montmorillonite .Based on the adsorption experiment at varying pH of solution,it can be found that the amount of heavy etals sorbed by minerals increases with increasing pH of the solution.

  10. The interaction of certain inorganic anions with clays and soils

    NARCIS (Netherlands)

    Haan, de F.A.M.

    1965-01-01

    Interaction between anions and soil colloids was governed by 2 antagonistic processes, anion exclusion and positive anion adsorption. The predominantly negative charge on the colloids caused anion repulsion; positively charged sites and chemisorption resulted in positive

  11. Effect of Injecting Hydrogen Peroxide into Heavy Clay Loam Soil on Plant Water Status, NET CO2 Assimilation, Biomass, and Vascular Anatomy of Avocado Trees Efecto de la Inyección de Peróxido de Hidrógeno en Suelo Franco Arcilloso Pesado, sobre el Estado Hídrico, Asimilación Neta de CO2, Biomasa y Anatomía Vascular de Paltos

    Directory of Open Access Journals (Sweden)

    Pilar M Gil M

    2009-03-01

    Full Text Available In Chile, avocado (Persea americana Mill. orchards are often located in poorly drained, low-oxygen soils, situation which limits fruit production and quality. The objective of this study was to evaluate the effect of injecting soil with hydrogen peroxide (H2O2 as a source of molecular oxygen, on plant water status, net CO2 assimilation, biomass and anatomy of avocado trees set in clay loam soil with water content maintained at field capacity. Three-year-old ‘Hass’ avocado trees were planted outdoors in containers filled with heavy loam clay soil with moisture content sustained at field capacity. Plants were divided into two treatments, (a H2O2 injected into the soil through subsurface drip irrigation and (b soil with no H2O2 added (control. Stem and root vascular anatomical characteristics were determined for plants in each treatment in addition to physical soil characteristics, net CO2 assimilation (A, transpiration (T, stomatal conductance (gs, stem water potential (SWP, shoot and root biomass, water use efficiency (plant biomass per water applied [WUEb]. Injecting H2O2 into the soil significantly increased the biomass of the aerial portions of the plant and WUEb, but had no significant effect on measured A, T, gs, or SWP. Xylem vessel diameter and xylem/phloem ratio tended to be greater for trees in soil injected with H2O2 than for controls. The increased biomass of the aerial portions of plants in treated soil indicates that injecting H2O2 into heavy loam clay soils may be a useful management tool in poorly aerated soil.En Chile, los huertos de palto (Persea americana Mill. se ubican comúnmente en suelos pobremente drenados con bajo contenido de oxígeno, lo que limita producción y calidad de fruta. El objetivo de este estudio fue evaluar el efecto de la inyección de peróxido de hidrógeno (H2O2 al suelo como fuente de O2, sobre el estado hídrico, asimilación de CO2, biomasa y anatomía de paltos en suelo franco arcilloso con

  12. Review: Role of soil rhizobacteria in phytoremediation of heavy metal contaminated soils

    Institute of Scientific and Technical Information of China (English)

    JING Yan-de; HE Zhen-li; YANG Xiao-e

    2007-01-01

    Heavy metal pollution of soil is a significant environmental problem and has its negative impact on human health and agriculture. Rhizosphere, as an important interface of soil and plant, plays a significant role in phytoremediation of contaminated soil by heavy metals, in which, microbial populations are known to affect heavy metal mobility and availability to the plant through release of chelating agents, acidification, phosphate solubilization and redox changes, and therefore, have potential to enhance phytoremediation processes. Phytoremediation strategies with appropriate heavy metal-adapted rhizobacteria have received more and more attention. This article paper reviews some recent advances in effect and significance of rhizobacteria in phytoremediation of heavy metal contaminated soils. There is also a need to improve our understanding of the mechanisms involved in the transfer and mobilization of heavy metals by rhizobacteria and to conduct research on the selection of microbial isolates from rhizosphere of plants growing on heavy metal contaminated soils for specific restoration programmes.

  13. Role of soil rhizobacteria in phytoremediation of heavy metal contaminated soils*

    Science.gov (United States)

    Jing, Yan-de; He, Zhen-li; Yang, Xiao-e

    2007-01-01

    Heavy metal pollution of soil is a significant environmental problem and has its negative impact on human health and agriculture. Rhizosphere, as an important interface of soil and plant, plays a significant role in phytoremediation of contaminated soil by heavy metals, in which, microbial populations are known to affect heavy metal mobility and availability to the plant through release of chelating agents, acidification, phosphate solubilization and redox changes, and therefore, have potential to enhance phytoremediation processes. Phytoremediation strategies with appropriate heavy metal-adapted rhizobacteria have received more and more attention. This article paper reviews some recent advances in effect and significance of rhizobacteria in phytoremediation of heavy metal contaminated soils. There is also a need to improve our understanding of the mechanisms involved in the transfer and mobilization of heavy metals by rhizobacteria and to conduct research on the selection of microbial isolates from rhizosphere of plants growing on heavy metal contaminated soils for specific restoration programmes. PMID:17323432

  14. Plants Role in Reducing Heavy Metals from Polluted Soil Leachate

    Directory of Open Access Journals (Sweden)

    Amouei A.* PhD,

    2015-09-01

    Full Text Available Aims In the past few decades, more attention has been paid to clean up soils polluted with heavy metals by plants. A serious problem in this way is the amount of heavy metals uptake by plants. This study was conducted to evaluate the effectiveness of 3 local plants of Mazandaran province, Iran, in reducing and controlling the soil’s heavy metals. Instrument & Methods The removal amount of three heavy metals (lead, zinc and cadmium by native plants (maize, velvetleaf and wild amaranth was investigated in alkaline (pH=8 and acidic (pH=5 soils and also using three substances such as EDTA, ammonium citrate and phosphate. The concentrations of these metals in leachate were measured by using atomic absorption spectrometry method. Findings Lead, cadmium and zinc levels in leachate in treatments with plants were less than unplanted ones. The concentrations of these metals in the produced leachate of treatments with acidic soils were higher than those with alkaline soils. In the treatments of soil polluted with additives, treatments containing ammonium phosphate and EDTA had the lowest and highest concentrations of heavy metals, respectively. Concentrations of these metals in treatments without plants were higher than those with plants. Conclusion Increasing of soil pH is effective on stabilization of heavy metals in soil. Ammonium phosphate plays an important role in stabilizing and EDTA and ammonium citrate increase the mobility of lead, zinc and cadmium in soil and groundwater.

  15. Removal of heavy metals and arsenic from a co-contaminated soil by sieving combined with washing process.

    Science.gov (United States)

    Liao, Xiaoyong; Li, You; Yan, Xiulan

    2016-03-01

    Batch experiments were conducted with a heavy metals and arsenic co-contaminated soil from an abandoned mine to evaluate the feasibility of a remediation technology that combines sieving with soil washing. Leaching of the arsenic and heavy metals from the different particle size fractions was found to decrease in the order: 2mm. With increased contact time, the concentration of heavy metals in the leachate was significantly decreased for small particles, probably because of adsorption by the clay soil component. For the different particle sizes, the removal efficiencies for Pb and Cd were 75%-87%, and 61%-77% for Zn and Cu, although the extent of removal was decreased for As and Cr at soil particles >2mm, although good metal removal efficiencies were also achieved in the small particle size fractions. Through SEM-EDS observations and correlation analysis, the leaching regularity of the heavy metals and arsenic was found to be closely related to Fe, Mn, and Ca contents of the soil fractions. The remediation of heavy metal-contaminated soil by sieving combined with soil washing was proven to be efficient, and practical remediation parameters were also recommended.

  16. FIELD STUDIES ON THE MARINE CLAY FOUNDATION SOIL BEDS TREATED WITH LIME, GBFS AND REINFORCEMENT TECHNIQUE

    Directory of Open Access Journals (Sweden)

    D. Koteswara Rao,

    2011-04-01

    Full Text Available Majority of the population in India are living in costal corridor, where the existing soils are weak and more deformative. It is becoming a great challenge for the civil engineers to design suitable foundation for the structures in these regions. The effect of GBFS, lime and geotextile as reinforcement & separator on the marine clay foundation soil bed in field has been investigated. A test track of 8m long and 2m wide was laid in the field for testing the treated and untreated conditions of the marine clay foundation soil beds. The ultimate load carrying capacity of the test tracks for untreated and treated conditions have been studied and also the degree of compaction of the test tract was found.

  17. Risk assessment of heavy metal contaminated soil in the vicinity of a lead/zinc mine

    Institute of Scientific and Technical Information of China (English)

    LI Jing; XIE Zheng-miao; ZHU Yong-guan; Ravi Naidu

    2005-01-01

    Heavy metal contamination of soils through anthropogenic activities is a widespread and serious problem confronting scientists and regulators throughout the world. In this study we investigated the distribution, chemical species and availability of lead, zinc, cadmium and copper in nine surface(0 to 20 cm) soils from near an abandoned lead/zinc mine tailings located in Shaoxing, Zhejiang, China. Total heavy metal contents ranged from 5271 to 16369 mg/kg for Pb, 387 to 1221 mg/kg for Zn, 3.0 to 9.3 mg/kg for Cd and 65 to 206 mg/kg for Cu. In general, all heavy metals exceeded China National Standards for Soil Environmental Quality of Heavy Metals by a factor of 3-65times. Comparison of the heavy metal concentrations( Pb, Zn, Cd and Cu) with clay content revealed a strongly significant relationship while significant relationship( P organically complexed-Fe-Mn oxides occluded >carbonate bound > exchangeable > water soluble. In the organic matter fraction, the ratio of Pb(29.1% ) to its total concentration in the soils was higher than those of Zn(4.70% ), Cd(3.16%) and Cu(9.50% ). The percentages of the water soluble and the exchangeable fractions of Pb(1.80% ) and Cd(2.74% ) were markedly greater than those of Zn(0.10% ) and Cu(0.15 % ), suggesting that Pb and Cd are relatively more mobile and hence more toxic in the contaminated soils. Strongly significant relationships between H2O-Pb, H2O-Zn and H2O-Cu, strong positive correlations between H2 O-Pb, H2O-Zn, H2 O-Cu and organic matter in soil were found. The content of H2 O-Pb,H2O-Zn, H2O-Cu was negatively correlated with pH values. The similar negative relationships between pH values and exchangeable heavy metals were also recorded. It is suggested that increasing soil pH or liming the soil could decrease bioavailability of heavy metals in the soil.

  18. Risk assessment of heavy metal contaminated soil in the vicinity of a lead/zinc mine.

    Science.gov (United States)

    Li, Jing; Xie, Zheng-miao; Zhu, Yong-guan; Naidu, Ravi

    2005-01-01

    Heavy metal contamination of soils through anthropogenic activities is a widespread and serious problem confronting scientists and regulators throughout the world. In this study we investigated the distribution, chemical species and availability of lead, zinc, cadmium and copper in nine surface (0 to 20 cm) soils from near an abandoned lead/zinc mine tailings located in Shaoxing, Zhejiang, China. Total heavy metal contents ranged from 5271 to 16369 mg/kg for Pb, 387 to 1221 mg/kg for Zn, 3.0 to 9.3 mg/kg for Cd and 65 to 206 mg/kg for Cu. In general, all heavy metals exceeded China National Standards for Soil Environmental Quality of Heavy Metals by a factor of 3-65 times. Comparison of the heavy metal concentrations (Pb, Zn, Cd and Cu) with clay content revealed a strongly significant relationship while significant relationship (P organically complexed-Fe-Mn oxides occluded > carbonate bound > exchangeable > water soluble. In the organic matter fraction, the ratio of Pb (29.1%) to its total concentration in the soils was higher than those of Zn (4.70%), Cd (3.16%) and Cu (9.50%). The percentages of the water soluble and the exchangeable fractions of Pb (1.80%) and Cd (2.74%) were markedly greater than those of Zn (0.10%) and Cu (0.15%), suggesting that Pb and Cd are relatively more mobile and hence more toxic in the contaminated soils. Strongly significant relationships between H2O-Pb, H2O-Zn and H2O-Cu, strong positive correlations between H2O-Pb, H2O-Zn, H2O-Cu and organic matter in soil were found. The content of H2O-Pb, H2O-Zn, H2O-Cu was negatively correlated with pH values. The similar negative relationships between pH values and exchangeable heavy metals were also recorded. It is suggested that increasing soil pH or liming the soil could decrease bioavailability of heavy metals in the soil.

  19. Effects of Heavy, Tracked-Vehicle Disturbance on Forest Soil Properties at Fort Benning, Georgia

    Energy Technology Data Exchange (ETDEWEB)

    Garten, C.T.,JR.

    2004-05-20

    The purpose of this report is to describe the effects of heavy, tracked-vehicle disturbance on various measures of soil quality in training compartment K-11 at Fort Benning, Georgia. Predisturbance soil sampling in April and October of 2002 indicated statistically significant differences in soil properties between upland and riparian sites. Soil density was less at riparian sites, but riparian soils had significantly greater C and N concentrations and stocks than upland soils. Most of the C stock in riparian soils was associated with mineral-associated organic matter (i.e., the silt + clay fraction physically separated from whole mineral soil). Topographic differences in soil N availability were highly dependent on the time of sampling. Riparian soils had higher concentrations of extractable inorganic N than upland soils and also exhibited significantly greater soil N availability during the spring sampling. The disturbance experiment was performed in May 2003 by driving a D7 bulldozer through the mixed pine/hardwood forest. Post-disturbance sampling was limited to upland sites because training with heavy, tracked vehicles at Fort Benning is generally confined to upland soils. Soil sampling approximately one month after the experiment indicated that effects of the bulldozer were limited primarily to the forest floor (O-horizon) and the surface (0-10 cm) mineral soil. O-horizon dry mass and C stocks were significantly reduced, relative to undisturbed sites, and there was an indication of reduced mineral soil C stocks in the disturbance zone. Differences in the surface (0-10 cm) mineral soil also indicated a significant increase in soil density as a result of disturbance by the bulldozer. Although there was some tendency for greater soil N availability in disturbed soils, the changes were not significantly different from undisturbed controls. It is expected that repeated soil disturbance over time, which will normally occur in a military training area, would simply

  20. Water retention of rigid soils from a two-factor model for clay

    CERN Document Server

    Chertkov, V Y

    2014-01-01

    Water retention is one of the key soil characteristics. Available models of soil water retention relate to the curve-fitting type. The objective of this work is to suggest a physical model of water retention (drying branch) for soils with a rigid matrix. "Physical" means the prediction based on the a priori measured or estimated soil parameters with a clear physical meaning. We rely on the two-factor model of clay that takes into account the factors of capillarity and shrinkage. The key points of the model to be proposed are some weak pseudo shrinkage that the rigid soils demonstrate according to their experimental water retention curves, and some specific properties of the rigid grain matrix. The three input parameters for prediction of soil water retention with the rigid grain matrix include inter-grain porosity, as well as maximum and minimum grain sizes. The comparison between measured and predicted sand water retention curves for four different sands is promising.

  1. Heavy metal displacement in chelate-irrigated soil during phytoremediation

    Science.gov (United States)

    Madrid, F.; Liphadzi, M. S.; Kirkham, M. B.

    2003-03-01

    Heavy metals in wastewater sewage sludge (biosolids), applied to land, contaminate soils. Phytoremediation, the use of plants to clean up toxic heavy metals, might remove them. Chelating agents are added to soil to solubilize the metals for enhanced phytoextraction. Yet no studies follow the displacement and leaching of heavy metals in soil with and without roots following solubilization with chelates. The objective of this work was to determine the mobility of heavy metals in biosolids applied to the surface of soil columns (76 cm long; 17 cm diam.) with or without plants (barley; Hordeum vulgare L.). Three weeks after barley was planted, all columns were irrigated with the disodium salt of the chelating agent, EDTA (ethylenediamine tetraacetic acid) (0.5 g/kg soil). Drainage water, soil, and plants were analyzed for heavy metals (Cd, Cu, Fe, Mn, Ni, Pb, Zn). Total concentrations of the heavy metals in all columns at the end of the experiment generally were lower in the top 30 cm of soil with EDTA than without EDTA. The chelate increased concentrations of heavy metals in shoots. With or without plants, the EDTA mobilized Cd, Fe, Mn, Ni, Pb, and Zn, which leached to drainage water. Drainage water from columns without EDTA had concentrations of these heavy metals below detection limits. Only Cu did not leach in the presence of EDTA. Even though roots retarded the movement of Cd, Fe, Mn, Ni, Pb, and Zn through the EDTA-treated soil from 1 d (Cd) to 5 d (Fe), the drainage water from columns with EDTA had concentrations of Cd, Fe, Mn, and Pb that exceeded drinking water standards by 1.3, 500, 620, and 8.6 times, respectively. Because the chelate rendered Cd, Fe, Mn, Ni, Pb, and Zn mobile, it is suggested that the theory for leaching of soluble salts, put forward by Nielsen and associates in 1965, could be applied to control movement of the heavy metals for maximum uptake during chelate-assisted phytoremediation.

  2. Impacts of heavy metals on 1,2-dichloroethane biodegradation in co-contaminated soil

    Institute of Scientific and Technical Information of China (English)

    Ademola O. Olaniran; Adhika Balgobind; Balakrishna Pillay

    2009-01-01

    1,2-Dichloroethane (DCA), a potential mutagen and carcinogen, is commonly introduced into the environment through its industrial and agricultural use. In this study, the impact of lead and mercury on DCA degradation in soil was investigated, owing to the complex co-contamination frequently encountered. 1,2-Dichloroethane was degraded readily in both contaminated loam and clay soils with the degradation rate range 0.370--0.536 week-1 and 0.309--0.417 week-1, respectively. The presence of heavy metals have a negative impact on DCA degradation in both soil types, resulting in up to 24.11% reduction in DCA degradation within one week. Both biostimulation and treatment additives increased DCA degradation, with the best degradation observed upon addition of glucose and a combination of diphosphate salt and sodium chloride, leading to about 17.91% and 43.50% increase in DCA degradation, respectively. The results have promising potential for effective remediation of soils co-contaminated with chlorinated organics and heavy metals. However, the best bioremediation strategy will depend on the soil types, microbial population present in the soil matrices, nutrients availability and metal forms.

  3. Influence of crop residues on trifluralin mineralization in a silty clay loam soil.

    Science.gov (United States)

    Farenhorst, Annemieke

    2007-01-01

    Trifluralin is typically applied onto crop residues (trash, stubble) at the soil surface, or onto the bare soil surface after the incorporation of crop residues into the soil. The objective of this study was to quantify the effect of the type and amount of crop residues in soil on trifluralin mineralization in a Wellwood silty clay loam soil. Leaves and stubble of Potato (Solanum tuberosum) (P); Canola (Brassica napus) (C), Wheat (Triticum aestivum) (W), Oats (Avena sativa), (O), and Alfalfa (Medicago sativa) (A) were added to soil microcosms at rates of 2%, 4%, 8% and 16% of the total soil weight (25 g). The type and amount of crop residues in soil had little influence on the trifluralin first-order mineralization rate constant, which ranged from 3.57E-03 day(-1) in soil with 16% A to 2.89E-02 day(-1) in soil with 8% W. The cumulative trifluralin mineralization at 113 days ranged from 1.15% in soil with 16% P to 3.21% in soil with 4% C, again demonstrating that the observed differences across the treatments are not of agronomic or environmental importance.

  4. The Influence of Clay on the Rate of Decay of Amino Acid Metabolites Synthesized in Soils during Decomposition of Cellulose

    DEFF Research Database (Denmark)

    Sørensen, Lasse Holst

    1975-01-01

    14C-labelled cellulose was added to seven different soils containing silt + clay (particles .... The amounts of labelled amino acid C in the soils were proportional to their content of silt + clay. After 30 days of incubation labelled amino acid C remaining in the soil with the lowest content of silt + clay constituted 6 per cent of the carbon added in cellulose, as compared with 18 per cent in the soil...... with the highest content of silt + clay. These values had decreased to 5 and 13 per cent respectively after 2 years of incubation. The order between the soils in the content of labelled amino acid C established during the first month of incubation, was thus roughly maintained throughout the period of incubation...

  5. Cations extraction of sandy-clay soils from cavado valley, portugal, using sodium salts solutions Extração de cátions em solos areno-argilosos do vale do cávado, portugal, utilizando soluções de sais de sódio

    OpenAIRE

    João Eudes da Silva; Fernando De Castro

    2002-01-01

    Cases of contamination by metals in the water wells of the Cavado Valley in north-west Portugal can be attributed to the heavy leaching of clay soils due to an excess of nitrogen resulting from the intensive use of fertilisers in agricultural areas. This work focuses on the natural weathering characteristics of soils, particularly the clay material, through the study of samples collected near the River Cavado. Samples taken from various sites, after physico-chemical characterisation, were sub...

  6. Screening of heavy metal containing waste types for use as raw material in Arctic clay-based bricks

    DEFF Research Database (Denmark)

    Belmonte, Louise Josefine; Ottosen, Lisbeth M.; Kirkelund, Gunvor Marie

    2016-01-01

    In the vulnerable Arctic environment, the impact of especially hazardous wastes can have severe consequences and the reduction and safe handling of these waste types are therefore an important issue. In this study, two groups of heavy metal containing particulate waste materials, municipal solid...... waste incineration (MSWI) fly and bottom ashes and mine tailings (i.e., residues from the mineral resource industry) from Greenland were screened in order to determine their suitability as secondary resources in clay-based brick production. Small clay discs, containing 20 or 40% of the different...... particulate waste materials, were fired and material properties and heavy metal leaching tests were conducted before and after firing. Remediation techniques (washing in distilled water and electrodialytical treatment) applied to the fly ash reduced leaching before firing. The mine tailings and bottom ash...

  7. Accumulation of heavy metals in oil-contaminated peat soils

    Science.gov (United States)

    Vodyanitskii, Yu. N.; Savichev, A. T.; Trofimov, S. Ya.; Shishkonakova, E. A.

    2012-10-01

    X-ray fluorescence and X-ray radiometry represent easy and simple methods to determine concentrations of heavy metals in the ash of peat soils contaminated with oil and can be applied for soil monitoring purposes. Oil spills on peat bogs produce two contamination zones differing in the composition of heavy metals. In the zone of primary contamination, the peat surface is covered by a bitumen crust with V, Ni, Sr, Ba, Ce, and La accumulating there. This zone adjoins the zone of secondary peat contamination, where heavy alkaline-earth metals (Sr, Ba) and lanthanides (Ce and La) are accumulated to a lesser extent. Biological preparations recommended for remediation of oil-contaminated peat soils should be tolerant to high concentrations of heavy metals, particularly, V, Ni, and Ba that are present in the oil contaminated soils in relatively high amounts.

  8. Heavy metal concentrations in soils and accumulation in plants ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-09-03

    Sep 3, 2008 ... An auto battery manufacturing company dumped slag containing proportion of heavy metals in ... their shoot over a wide range of soil concentrations. They ... capacity of plants that grew naturally on metalliferous wastes and ...

  9. LEAD ACCUMULATION IN THE ROADSIDE SOILS FROM HEAVY ...

    African Journals Online (AJOL)

    Preferred Customer

    The levels of lead pollution in the roadside soils of the heavy density motor ... biochemical and physiological dysfunctions to humans and laboratory ... Furthermore, literature reports confirmed that leaded gasoline was responsible for the lead.

  10. Clay Components in Soil Dictate Environmental Stability and Bioavailability of Cervid Prions in Mice

    Science.gov (United States)

    Wyckoff, A. Christy; Kane, Sarah; Lockwood, Krista; Seligman, Jeff; Michel, Brady; Hill, Dana; Ortega, Aimee; Mangalea, Mihnea R.; Telling, Glenn C.; Miller, Michael W.; Vercauteren, Kurt; Zabel, Mark D.

    2016-01-01

    Chronic wasting disease (CWD) affects cervids and is the only known prion disease to affect free-ranging wildlife populations. CWD spread continues unabated, and exact mechanisms of its seemingly facile spread among deer and elk across landscapes in North America remain elusive. Here we confirm that naturally contaminated soil contains infectious CWD prions that can be transmitted to susceptible model organisms. We show that smectite clay content of soil potentiates prion binding capacity of different soil types from CWD endemic and non-endemic areas, likely contributing to environmental stability of bound prions. The smectite clay montmorillonite (Mte) increased prion retention and bioavailability in vivo. Trafficking experiments in live animals fed bound and unbound prions showed that mice retained significantly more Mte-bound than unbound prions. Mte promoted rapid uptake of prions from the stomach to the intestines via enterocytes and M cells, and then to macrophages and eventually CD21+ B cells in Peyer's patches and spleens. These results confirm clay components in soil as an important vector in CWD transmission at both environmental and organismal levels. PMID:27933048

  11. Sorption-desorption of imidacloprid onto a lacustrine Egyptian soil and its clay and humic acid fractions.

    Science.gov (United States)

    Kandil, Mahrous M; El-Aswad, Ahmed F; Koskinen, William C

    2015-01-01

    Sorption-desorption of the insecticide imidacloprid 1-[(6-chloro-3-pyridinyl)-methyl]-N-nitro-2-imidazolidinimine onto a lacustrine sandy clay loam Egyptian soil and its clay and humic acid (HA) fractions was investigated in 24-h batch equilibrium experiments. Imidacloprid (IMDA) sorption-desorption isotherms onto the three sorbents were found to belong to a non-linear L-type and were best described by the Freundlich model. The value of the IMDA adsorption distribution coefficient, Kd(ads), varied according to its initial concentration and was ranged 40-84 for HA, 14-58 for clay and 1.85-4.15 for bulk soil. Freundlich sorption coefficient, Kf(ads), values were 63.0, 39.7 and 4.0 for HA, clay and bulk soil, respectively. The normalized soil Koc value for imidacloprid sorption was ∼800 indicating its slight mobility in soils. Nonlinear sorption isotherms were indicated by 1/n(ads) values imidacloprid sorption process with all tested sorbents. Gibbs free energy (ΔG) values indicated a spontaneous and physicosorption process for IMDA and a more favorable sorption to HA than clay and soil. In conclusion, although the humic acid fraction showed the highest capacity and affinity for imidacloprid sorption, the clay fraction contributed to approximately 95% of soil-sorbed insecticide. Clay and humic acid fractions were found to be the major two factors controlling IMDA sorption in soils. The slight mobility of IMDA in soils and the hysteresis phenomenon associated with the irreversibility of its sorption onto, mainly, clay and organic matter of soils make its leachability unlikely to occur.

  12. Leaching of heavy metals from contaminated soils: an experimental and modeling study.

    Science.gov (United States)

    Dijkstra, Joris J; Meeussen, Johannes C L; Comans, Rob N J

    2004-08-15

    In this paper, we characterize the leaching of heavy metals (Ni, Cu, Zn, Cd, and Pb) from eight contaminated soils over a wide range of pH (pH 0.4-12) using an original approach based on batch pH-static leaching experiments in combination with selective chemical extractions and geochemical modeling. The leached concentrations of the heavy metals are generally much lower than the total concentrations and show a strong pH dependency, resulting in "V-shaped" leaching curves with orders of magnitude changes in solution concentrations. The "multisurface" model used incorporates adsorption to dissolved and solid organic matter (NICA-Donnan), iron/aluminum (hydr)oxide (generalized two-layer model) and clay (Donnan model). These models were applied without modifications, and only the standard set of binding constants and parameters was used (i.e., without any fitting). The model predictions of heavy metal leaching are generally adequate and sometimes excellent. Results from speciation calculations are consistent with the well-recognized importance of organic matter as the dominant reactive solid phase in soils. The observed differences between soils with respect to element speciation in the solid phase correspond to the relative amounts of the reactive surfaces present in the soils. In the solution phase, complexes with dissolved organic matter (DOM) are predominant over most of the pH range. Free metal ions (Me2+) are generally the dominant species below pH 4. The combination of the experimental and modeling approach as used in this study is shown to be promising because it leads to a more fundamental understanding of the pH-dependent leaching processes in soils. The "multisurface" modeling approach, with the selected sorption models, is shown to be able to adequately predict the leaching of heavy metals from contaminated soils over a wide range of conditions, without any fitting of parameters.

  13. The Effect of Land Use Change on Soil Type and Clay Mineralogy in Safashahr Area, Fars Province

    Directory of Open Access Journals (Sweden)

    R. Karimi

    2015-06-01

    Full Text Available Nowadays, changing the rangelands to agriculture and garden is common. To investigate the impact of land use change on the soils type and clay mineralogy, four land uses including rangeland with poor vegetation, agricultural land, new and old apple orchards were selected in Safashahr area, Fars province. In each land use, three soil profiles were excavated and described and one profile was considered as representative. After required physical and chemical analyses, they were classified according to Soil Taxonomy (ST and the World Reference Base for Soil Resources (WRB. Selected surface and subsurface samples were also collected for clay mineralogy studies. Results showed that changing land use did not have significant effect on soil type and clay minerals and all soils consist of mica, chlorite, smectite, kaolinite and mixed layer minerals. Results demonstrated that ST is more efficient compared to WRB to classify the studied soils.

  14. Effect of biochar amendment on nitrate retention in a silty clay loam soil

    Directory of Open Access Journals (Sweden)

    Angela Libutti

    2016-08-01

    Full Text Available Biochar incorporation into agricultural soils has been proposed as a strategy to decrease nutrient leaching. The present study was designed to assess the effect of biochar on nitrate retention in a silty clay loam soil. Biochar obtained from the pyrogasification of fir wood chips was applied to soil and tested in a range of laboratory sorption experiments. Four soil treatments were considered: soil only (control, soil with 2, 4 and 8% of biochar by mass. The Freundlich sorption isotherm model was used to fit the adsorbed amount of nitrate in the soil-biochar mixtures. The model performed very well in interpreting the experimental data according to a general linear regression (analysis of co-variance statistical approach. Nitrate retention in the soilbiochar mixtures was always higher than control, regardless the NO3 – concentration in the range of 0-400 mg L–1. Different sorption capacities and intensities were detected depending on the biochar application rate. The highest adsorption capacity was observed in the soils added with 2 and 4% of biochar, respectively. From the results obtained is possible to infer that nitrate retention is higher at lower biochar addition rate to soil (2 and 4% and at lower nitrate concentration in the soil water solution. These preliminary laboratory results suggest that biochar addition to a typical Mediterranean agricultural soil could be an effective management option to mitigate nitrate leaching.

  15. Migration of radionuclides and heavy metals during the bioremediation of a polluted cinnamonic soil

    Science.gov (United States)

    Georgiev, Plamen; Groudev, Stoyan; Spasova, Irena; Nikolova, Marina

    2013-04-01

    A fresh sample of cinnamonic soil polluted with radionuclides (U, Ra) and toxic heavy metals (Cu, Pb, Zn) was subjected to bioremediation in large-scale lysimeters by means of moulching. The aim of soil treatment was solubilization of pollutants located in horizon A, the migration of their dissolved complexes through the soil profile, and the pollutants` precipitation in the rich-in-clays below-lying horizons. The solubilization was due to the joint action of natural soil microflora and leach waters containing ammonium and phosphate ions, and in some variants-hydrocarbonate ions. The precipitation of pollutants was due to the enhanced activity of the indigenous microflora in which iron- and sulphate-reducing bacteria were the prevalent groups. After 24 months of treatment, each of the soil profiles in different lysimeters was divided into five sections reflecting the relevant soil layers (horizon A and the sub-horizons B1, B2, B3, and B4). The soil in these sections was subjected to a detailed chemical analysis and the obtained data were compared with the relevant data obtained before the start of soil bioremediation. It was found that considerable portions of the pollutants were removed from the horizon A and were migrated to the sub-horizons B3 and B4, mainly. In these sub-horizons the non-ferrous metals were precipitated mainly as the relevant sulphides, uranium was precipitated as uraninite (UO2), and radium-mainly as adsorbed ions and complexes.

  16. [Research on characteristics of soil clay mineral evolution in paddy field and dry land by XRD spectrum].

    Science.gov (United States)

    Zhang, Zhi-dan; Li, Qiao; Luo, Xiang-li; Jiang, Hai-chao; Zheng, Qing-fu; Zhao, Lan-po; Wang, Ji-hong

    2014-08-01

    The present paper took the typical saline-alkali soil in Jilin province as study object, and determinated the soil clay mineral composition characteristics of soil in paddy field and dry land. Then XRD spectrum was used to analyze the evolutionary mechanism of clay mineral in the two kinds of soil. The results showed that the physical and chemical properties of soil in paddy field were better than those in dry land, and paddy field would promote the weathering of mineral particles in saline-alkali soil and enhance the silt content. Paddy field soil showed a strong potassium-removal process, with a higher degree of clay mineral hydration and lower degree of illite crystallinity. Analysis of XRD spectrum showed that the clay mineral composition was similar in two kinds of soil, while the intensity and position of diffraction peak showed difference. The evolution process of clay mineral in dry land was S/I mixture-->vermiculite, while in paddy field it was S/I mixture-->vermiculite-->kaolinite. One kind of hydroxylated 'chlorite' mineral would appear in saline-alkali soil in long-term cultivated paddy field. Taking into account that the physical and chemical properties of soil in paddy field were better then those in dry land, we could know that paddy field could help much improve soil structure, cultivate high-fertility soil and improve saline-alkali soil. This paper used XRD spectrum to determine the characteristics of clay minerals comprehensively, and analyzed two'kinds of land use comparatively, and was a new perspective of soil minerals study.

  17. Treatability of TCE-contaminated clay soils at the Rinsewater Impoundment, Michoud Assembly Facility

    Energy Technology Data Exchange (ETDEWEB)

    Lucero, A.J.; Gilbert, V.P.; Hewitt, J.D.; Koran, L.J. Jr.; Jennings, H.L.; Donaldson, T.L.; West, O.R.; Cline, S.R.; Marshall, D.S.

    1995-02-01

    The Oak Ridge National Laboratory has conducted treatability studies on clay soils taken from the Rinsewater Impoundment at the National Aeronautics and Space Administration Michoud Assembly Facility. The soils are contaminated with up to 3000 mg/kg of trichloroethylene and cis-1,2-dichloroethylene, less than 10 mg/kg of trans-1,2-DCE, and less than 10 mg/kg of vinyl chloride. The goal of the study described in this report was to identify and test in situ technologies and/or develop a modified treatment regime to remove or destroy volatile organic compounds from the contaminated clay soils. Much of the work was based upon previous experience with mixed-region vapor stepping and mixed-region peroxidation. Laboratory treatments were performed on intact soil cores that were taken from contaminated areas at the Rinsewater Impoundment at MAF. Treatability studies were conducted on soil that was close to in situ conditions in terms of soil structure and contaminant concentrations.

  18. Treatability of TCE-contaminated clay soils at the Rinsewater Impoundment, Michoud Assembly Facility

    Energy Technology Data Exchange (ETDEWEB)

    Lucero, A.J.; Gilbert, V.P.; Hewitt, J.D.; Koran, L.J. Jr.; Jennings, H.L.; Donaldson, T.L.; West, O.R.; Cline, S.R.; Marshall, D.S.

    1995-02-01

    The Oak Ridge National Laboratory has conducted treatability studies on clay soils taken from the Rinsewater Impoundment at the National Aeronautics and Space Administration Michoud Assembly Facility. The soils are contaminated with up to 3000 mg/kg of trichloroethylene and cis-1,2-dichloroethylene, less than 10 mg/kg of trans-1,2-DCE, and less than 10 mg/kg of vinyl chloride. The goal of the study described in this report was to identify and test in situ technologies and/or develop a modified treatment regime to remove or destroy volatile organic compounds from the contaminated clay soils. Much of the work was based upon previous experience with mixed-region vapor stepping and mixed-region peroxidation. Laboratory treatments were performed on intact soil cores that were taken from contaminated areas at the Rinsewater Impoundment at MAF. Treatability studies were conducted on soil that was close to in situ conditions in terms of soil structure and contaminant concentrations.

  19. Electrokinetic treatment of an agricultural soil contaminated with heavy metals.

    Science.gov (United States)

    Figueroa, Arylein; Cameselle, Claudio; Gouveia, Susana; Hansen, Henrik K

    2016-07-28

    The high organic matter content in agricultural soils tends to complex and retain contaminants such as heavy metals. Electrokinetic remediation was tested in an agricultural soil contaminated with Co(+2), Zn(+2), Cd(+2), Cu(+2), Cr(VI), Pb(+2) and Hg(+2). The unenhanced electrokinetic treatment was not able to remove heavy metals from the soil due to the formation of precipitates in the alkaline environment in the soil section close to the cathode. Moreover, the interaction between metals and organic matter probably limited metal transportation under the effect of the electric field. Citric acid and ethylenediaminetetraacetic acid (EDTA) were used in the catholyte as complexing agents in order to enhance the extractability and removal of heavy metals from soil. These complexing agents formed negatively charged complexes that migrated towards the anode. The acid front electrogenerated at the anode favored the dissolution of heavy metals that were transported towards the cathode. The combined effect of the soil pH and the complexing agents resulted in the accumulation of heavy metals in the center of the soil specimen.

  20. Diversity of clay minerals in soils of solonetzic complexes in the southeast of Western Siberia

    Science.gov (United States)

    Chizhikova, N. P.; Khitrov, N. B.

    2016-12-01

    Data on the mineralogical composition of clay in soils of solonetzic complexes of the Priobskoe Plateau and the Kulunda and Baraba lowlands have been generalized. The parent materials predominating in these regions have loamy and clayey textures and are characterized by the association of clay minerals represented by dioctahedral and trioctahedral mica-hydromica, chlorite, kaolinite, and a number of irregular interstratifications. They differ in the proportions between the major mineral phases and in the qualitative composition of the minerals. Mica-hydromica and chlorites with a small amount of smectitic phase predominate on the Priobskoe Plateau and in the Kulunda Lowland; in the Baraba Lowland, the portion of mica-smectite interstratifications is higher. An eluvial-illuvial distribution of clay fraction in solonetzes is accompanied by the acid-alkaline destruction and lessivage of clay minerals, including the smectitic phase in the superdispersed state. This results in the strong transformation of the mineralogical composition of the upper (suprasolonetzic) horizons and in the enrichment of the solonetzic horizons with the products of mineral destruction; superdispersed smectite; and undestroyed particles of hydromica, kaolinite, and chlorite from the suprasolonetzic horizons. A significant decrease in the content of smectitic phase in the surface solodic horizons of solonetzic complexes has different consequences in the studied regions. In the soils of the Priobskoe Plateau and Kulunda Lowland with a relatively low content (10-30%) of smectitic phase represented by chlorite-smectite interstratifications, this phase virtually disappears from the soils (there are only rare cases of its preservation). In the soils of the Baraba Lowland developed from the parent materials with the high content (30-50%) of smectitic phase represented by mica-smectite interstratifications, the similar decrease (by 10-20%) in the content of smectitic phase does not result in its

  1. Comparison of revegetation techniques on mineral clay soil: analysis of quantitative response of vegetation cover

    Directory of Open Access Journals (Sweden)

    Enrico Muzzi

    2016-08-01

    Full Text Available Revegetation of mineral-clay soils is a notably complex ecological and technically challenging undertaking that depends on substrate profile and local micro-environmental conditions, factors making it a particularly long procedure as well. This study compared and assessed the medium-term effectiveness of four treatments employed to promote stable pedogenesis and herbaceous recolonisation of abandoned clay quarries in the Apennine foothills of northern Italy’s Emilia- Romagna region. The treatments included: slow-release N organic fertiliser, phosphate fertiliser, organic amendment and topsoil [the soil top layer (0-0.2 m of a local natural meadow]. The state of the vegetative cover was monitored monthly from 1994 through 2004, until problems of slope stability at the site compromised the integrity of the trial plots. Significant effects were achieved by the recycled topsoil through 8 years and by organic amendment through 6 years; the effects of slow-release nitrogen were notably limited over time and phosphorous delivered a medium-term response but of notable year-toyear swings. No interactions among factors emerged in the mediumterm. After 11 years, treatments did not induce effects statistical appreciable. Our results suggest that the tested agronomic strategies on mineral clay soil did not trigger, in the medium-term, secondary succession processes able to potentially alter the spontaneous revegetation course.

  2. Clay Mineralogy of Soils and Sediments from an Alluvial Aquifer, Rifle, Colorado

    Science.gov (United States)

    Elliott, W. C.; Zaunbrecher, L. K.; Lim, D.; Pickering, R. A.; Williams, K. H.; Long, P. E.; Qafoku, N. P.

    2014-12-01

    Alluvial aquifers along the Colorado River corridor in central to western Colorado contain legacy contamination including U, V, As and Se. These alluvial aquifers host important "hot spots" and "hot moments" for microbiological activity controlling organic carbon processing and fluxes in the subsurface that are both significant on their own, but also influence contaminant behavior. Mineral phases likely active in the sequestration of metal contaminants are chlorite, smectite-vermiculite, illite, and smectite. These minerals are also important biogeofacies markers. The Colorado alluvial sediments include lenses of silt and clay that are commonly more reduced than coarser grained materials. The clay minerals that make up the alluvial aquifer sediments include these mineral phases important for metal sequestration (chlorite, smectite, illite), as well as kaolinite and quartz. More specifically, the clay mineralogy of soils derived from these sediments at Rifle are composed of the same suite of minerals found in the alluvial sediments plus a vermiculite-smectite intergrade. The vermiculite-smectite intergrade is a weathering product of illite. The presence of illite and chlorite in both the sediments and the soils at Rifle reflect a mineralogically immature character of the source rocks. These assemblages are consistent with sediments and soils that formed in a moderately low rainfall climate, indicative of mixed provence of immature (chlorite, smectite, illite) and mature (kaolinite) minerals relative to their source areas.

  3. Predicting the phytoextraction duration to remediate heavy metal contaminated soils

    NARCIS (Netherlands)

    Koopmans, G.F.; Römkens, P.F.A.M.; Song, J.; Temminghoff, E.J.M.; Japenga, J.

    2007-01-01

    The applicability of phytoextraction to remediate soils contaminated with heavy metals (HMs) depends on, amongst others, the duration before remediation is completed. The impact of changes in the HM content in soil occurring during remediation on plant uptake has to be considered in order to obtain

  4. USING BIOPOLYMERS TO REMOVE HEAVY METALS FROM SOIL AND WATER

    Science.gov (United States)

    Chemical remediation of soil may involve the use of harsh chemicals that generate waste streams, which may adversely affect the soil's integrity and ability to support vegetation. This article reviews the potential use of benign reagents, such as biopolymers, to extract heavy me...

  5. Predicting the phytoextraction duration to remediate heavy metal contaminated soils

    NARCIS (Netherlands)

    Koopmans, G.F.; Römkens, P.F.A.M.; Song, J.; Temminghoff, E.J.M.; Japenga, J.

    2007-01-01

    The applicability of phytoextraction to remediate soils contaminated with heavy metals (HMs) depends on, amongst others, the duration before remediation is completed. The impact of changes in the HM content in soil occurring during remediation on plant uptake has to be considered in order to obtain

  6. Electrodialytic Remediation of Heavy Metal Polluted Soil. An Innovative Technique

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Hansen, Henrik; Karlsmose, Bodil

    1997-01-01

    Electrodialytic remediationof heavy metal polluted soil is a newly developed method which combines the electrokinetic movement of ions in soil with the principle of electrodialysis. The method has prowen to work in laboratorscale and at presnet two types of pilot plants are build....

  7. Impact of clay mineral on air oxidation of PAH-contaminated soils.

    Science.gov (United States)

    Biache, Coralie; Kouadio, Olivier; Lorgeoux, Catherine; Faure, Pierre

    2014-09-01

    This work investigated the impact of a clay mineral (bentonite) on the air oxidation of the solvent extractable organic matters (EOMs) and the PAHs from contaminated soils. EOMs were isolated from two coking plant soils and mixed with silica sand or bentonite. These samples, as well as raw soils and bentonite/soil mixtures, were oxidized in air at 60 and 100 °C for 160 days. Mineralization was followed by measuring the CO2 produced over the experiments. EOM, polycyclic aromatic compound (PAC), including PAH, contents were also determined. Oxidation led to a decrease in EOM contents and PAH concentrations, these diminutions were enhanced by the presence of bentonite. Transfer of carbon from EOM to insoluble organic matter pointed out a condensation phenomenon leading to a stabilization of the contamination. Higher mineralization rates, observed during the oxidation of the soil/bentonite mixtures, seem to indicate that this clay mineral had a positive influence on the transformation of PAC into CO2.

  8. Determination of essential and toxic elements in clay soil commonly consumed by pregnant women in Tanzania

    Science.gov (United States)

    Mwalongo, D.; Mohammed, N. K.

    2013-10-01

    A habit of eating clay soil especially among pregnant women is a common practice in Tanzania. This practice known as geophagy might introduce toxic elements in the consumer's body to endanger the health of the mother and her child. Therefore it is very important to have information on the elemental composition of the eaten soil so as to assess the safety nature of the habit. In this study 100 samples of clay soil, which were reported to be originating from five regions in Tanzania and are consumed by pregnant women were analyzed to determine their levels of essential and toxic elements. The analysis was carried out using energy dispersive X-ray fluorescent technique (EDXRF) of Tanzania Atomic Energy Commission, Arusha. Essential elements Fe, Zn, Cu, Se and Mn and toxic elements As, Pb, Co, Ni, U and Th were detected in concentrations above WHO permissible limits in some of the samples. The results from this study show that the habit of eating soil is exposing the pregnant mothers and their children to metal toxicity which is detrimental to their health. Hence, further actions should be taken to discourage the habit of eating soil at all levels.

  9. Soft X-ray spectromicroscopy study of mineral-organic matter associations in pasture soil clay fractions.

    Science.gov (United States)

    Chen, Chunmei; Dynes, James J; Wang, Jian; Karunakaran, Chithra; Sparks, Donald L

    2014-06-17

    There is a growing acceptance that associations with soil minerals may be the most important overarching stabilization mechanism for soil organic matter. However, direct investigation of organo-mineral associations has been hampered by a lack of methods that can simultaneously characterize organic matter (OM) and soil minerals. In this study, STXM-NEXAFS spectroscopy at the C 1s, Ca 2p, Fe 2p, Al 1s, and Si 1s edges was used to investigate C associations with Ca, Fe, Al, and Si species in soil clay fractions from an upland pasture hillslope. Bulk techniques including C and N NEXAFS, Fe K-edge EXAFS spectroscopy, and XRD were applied to provide additional information. Results demonstrated that C was associated with Ca, Fe, Al, and Si with no separate phase in soil clay particles. In soil clay particles, the pervasive C forms were aromatic C, carboxyl C, and polysaccharides with the relative abundance of carboxyl C and polysaccharides varying spatially at the submicrometer scale. Only limited regions in the soil clay particles had aliphatic C. Good C-Ca spatial correlations were found for soil clay particles with no CaCO3, suggesting a strong role of Ca in organo-mineral assemblage formation. Fe EXAFS showed that about 50% of the total Fe in soils was contained in Fe oxides, whereas Fe-bearing aluminosilicates (vermiculite and Illite) accounted for another 50%. Fe oxides in the soil were mainly crystalline goethite and hematite, with lesser amounts of poorly crystalline ferrihydrite. XRD revealed that soil clay aluminosilicates were hydroxy-interlayered vermiculite, Illite, and kaolinite. C showed similar correlation with Fe to Al and Si, implying a similar association of Fe oxides and aluminosilicates with organic matter in organo-mineral associations. These direct microscopic determinations can help improve understanding of organo-mineral interactions in soils.

  10. Soil reclamation by municipal sewage compost: Heavy metals migration study.

    Science.gov (United States)

    Kowalkowski, Tomasz; Buszewski, Bogusław

    2009-04-01

    This paper describes sorption and transport phenomena of selected heavy metals (e.g., Pb, Zn, Ni and Cu) in the superficial layer of soil and sewage sludge compost. The main aim of the study was the investigation of possibility of heavy metals contamination in soil profile reclaimed by sewage sludge compost. The column leaching test as well as the sequential Tessier extraction procedure were applied to investigate the mitigation of heavy metals. The results revealed that distribution of metals in specific Tessier fractions was the major factor influencing their transport in the investigated soils profiles. Moreover, sorption capacity of the soil sample studied was substantially greater to prevent transportation of metals into the lower horizons and groundwater.

  11. Heavy oil components sorbed onto clay minerals in Canadian oil sands

    Energy Technology Data Exchange (ETDEWEB)

    Fendel, A.; Schwochau, K. (Institute for Petroleum and Organic Geochemistry, Nuclear Research Centre (KFA), Julich (DE))

    1988-06-01

    In siliciclastic reservoir rocks the surface-active clay minerals are presumed to be predominantly responsible for the sorption of polar oil components. In order to achieve a better insight into the nature of the oil components sorbed onto clay minerals, unconsolidated Canadian Oil Sands (Cold Lake, Athabasca) were exhaustively extracted with dichloromethane to remove the free oil. The clay minerals (grain fraction less than or equal to2 ..mu..m) were then separated by gravitational sedimentation. After the extraction up to 3 wt of organic carbon still remained on the clays. The amount of aliphatic carbon adhering to the clays was assessed by means of IR-spectroscopy. The clay minerals were successively extracted with solvent mixtures of increasing polarity in order to release the bound oil components. The extracts were fractionated into chemically defined compound classes by semi-preparative liquid chromatography and MPLC. The fractions were characterized by GC, GC-MS and IR-spectroscopy. Components containing oxygen functions (carboxylic acids, esters, alcohols, ketones) appear to be preferentially bound by clays. Moreover, a small amount of hydrocarbons, in particular saturates, are sorbed by clays.

  12. Fertilizer Management for Passion Fruit (Passifloraedulison Alaminos Clay Soil

    Directory of Open Access Journals (Sweden)

    Naominida C.Olermo

    2017-05-01

    Full Text Available Soils in rolling to hilly are strongly acidic and deficient in N, P and K – characteristics that are major constraints to high fruit yield like passion fruit. The importance of the macronutrient to passion fruit production showed that best yield was obtained with fertilization of 250-50-80 kg N-P2O5- K2Oha-1 . The degree of importance of N, P and K followed the order N > P > K. Yield reductions due to the absence of these nutrients from the complete treatment were 60%, 39% and 7%, respectively. Furthermore, best value per fruit was observed with fertilization 250-50-80 kg N-P2O5-K2O ha-1 .Mean value per fruit reductions due to non-application of N or P or K from the complete treatment were 29.74%, 17.75% and 11.19%, respectively. Higher juice characteristic (pH was observed from treatments with K compared from treatments without K. Performance of passion fruit from combined inorganic and organic fertilizers showed that highest yield and average value per fruit were produced by fertilization with 75% IF + 25% OF. Yield per hectare and average value per fruit reductions due to decreasing of percentage inorganic fertilizer (IF but increasing of percentage organic fertilizer (OF like 50% IF + 50% OF, 25% IF + 75% OF, and 100% OF were 26%, 37%, and 56% the former and 6%, 13%, and 41% the later, respectively

  13. THE EFFECT OF MIXING WITH ORGANIC SOIL ON CHANGES IN SOME PHYSICAL PROPERTIES OF A COMPACTED CLAY LOAM SOIL

    Directory of Open Access Journals (Sweden)

    Abdullah BARAN

    1996-01-01

    Full Text Available In this research, the effect of organic soil on changes in total pore space, aeration porosity, available water content and hydraulic conductivity of a compacted clay loam were investigated. By adding organic soil at rates of 0 %, 1 %, 2 % and 4 % to soil, mixtures were compacted at compaction levels of 0 kg/cm2, 0.21 kg/cm2, 1.98 kg/cm2 and 3.95 kg/cm2 Some physical properties of compacted soil were determined. Compaction decreased total pore space, areation porosity, available water content and hydraulic conductivity, but in samples with the mixing rate of 4 %, all properties inspected were affected positively in all compaction levels, except available water content

  14. Characterization of Heavy metals from banana farming soils

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Dian; Huang, Cheng He; Huang, Dong Yi [College of Agronomy, Hainan University, Haikou City, Hainan Province (China); Ouyang, Ying [Department of Water Resources, St. Johns River Water Management District, Palatka, FL (United States)

    2010-06-15

    There is a growing public concern about the contamination of heavy metals in agricultural soils in China due to the increasingly applications of chemical fertilizers and pesticides during the last two decades. This study characterized the variability of heavy metals, including copper (Cu), zinc (Zn), lead (Pb), cadmium (Cd), and nickel (Ni), from the banana farming soils in western Hainan Island, China. Five banana farms from different locations in the island were selected to collect 69 mixed-soil samples in this study. Experimental data showed that concentrations of Cu ranged from 3.38 to 54.52, Zn from 24.0 to 189.8, Pb from 15.98 to 58.42, Cd from 0.43 to 3.21, and Ni from 3.47 to 121.86 mg kg{sup -1} dry wt. In general, concentrations of the heavy metals varied with metal species and changed from location to location, which occurred presumably due to the variations of soil parent materials and to a certain extent due to the use of different types of agrochemicals. Our study further revealed that concentrations of Cu and Zn were higher in the banana farming soils than in the natural (control) soils among all of the five locations, whereas mixed results were observed for Pb, Cd, and Ni in both the banana farming and control soils, depending on the locations. Comparisons of the heavy metal concentrations with the Chinese Soil Quality Standards (CSQSs) showed that Cu, Zn, and Pb contents were lower but Cd and Ni contents were higher in the banana farming soils than the Class II standard of the CSQSs. Results suggested that accumulation of Cu, Zn, and Pb in the soils is safe for banana fruit production, whereas accumulation of Cd and Ni in the same soils could potentially pose threats to banana fruit safety. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  15. Total and Available Heavy Metal Concentrations and Assessment of Soil Pollution Indices in Selected Soils of Zanjan

    Directory of Open Access Journals (Sweden)

    M. Taheri

    2017-01-01

    Full Text Available Introduction: Soil is a hardly renewable natural resource. Although soil degradation, caused by either human activities and natural processes is a relatively slow procedure, but its effects are long lasting and most often, irreversible in the time scale of man's life. Among the most significant soil contaminants resulting from both natural and human sources, heavy metals are more important due to their long- term toxicity effects. For evaluating soil's enrichment rate by heavy metals, a wide and full study of soils background values, including total and available fractions of heavy metal contents should be done. Zanjan province has some great mines and concentrating industries of lead and zinc especially in Angoran, Mahneshan. Unfortunately produced waste materials of these industries spread over the adjacent areas. Investigations showed that accumulation of some heavy metals in vegetables and crops planted in this region had occurred. Therefore, performing some investigations in these polluted areas and assessing pollution rate and heavy metals distribution in arable lands had prime importance. Our goals were: 1 determining the total and available amounts of Cu, Pb, Zn and Cd in the soils of arable lands in polluted areas of Zanjan city, 2 producing the distribution map for the metals mentioned above and 3 calculating pollution indices in the soils. Materials and Methods: The study area was in south west of Zanjan city. For soil sampling, a 1 Km by 1 Km grid defined in ArcGIS software on landuse layer and totally 144 points that placed on agricultural lands, due to our goals, were sampled. For sampling, in a 5m radius around the point we collected some subsamples from depth of 0 - 15 cm, and after mixing the subsamples, finally a 1Kg soil sample prepared and sent to the laboratory. Sampled soils were air dried and were passed through a 2mm sieve. Soils organic matter (OM content and texture were determined by Walkely-Black and Bouyoucos

  16. Ammonia transformations and abundance of ammonia oxidizers in a clay soil underlying a manure pond.

    Science.gov (United States)

    Sher, Yonatan; Baram, Shahar; Dahan, Ofer; Ronen, Zeev; Nejidat, Ali

    2012-07-01

    Unlined manure ponds are constructed on clay soil worldwide to manage farm waste. Seepage of ammonia-rich liquor into underlying soil layers contributes to groundwater contamination by nitrate. To identify the possible processes that lead to the production of nitrate from ammonia in this oxygen-limited environment, we studied the diversity and abundance of ammonia-transforming microorganisms under an unlined manure pond. The numbers of ammonia-oxidizing bacteria and anammox bacteria were most abundant in the top of the soil profile and decreased significantly with depth (0.5 m), correlating with soil pore-water ammonia concentrations and soil ammonia concentrations, respectively. On the other hand, the numbers of ammonia-oxidizing archaea were relatively constant throughout the soil profile (10(7) amoA copies per g(soil)). Nitrite-oxidizing bacteria were detected mainly in the top 0.2 m. The results suggest that nitrate accumulation in the vadose zone under the manure pond could be the result of complete aerobic nitrification (ammonia oxidation to nitrate) and could exist as a byproduct of anammox activity. While the majority of the nitrogen was removed within the 0.5-m soil section, possibly by combined anammox and heterotrophic denitrification, a fraction of the produced nitrate leached into the groundwater.

  17. Smectite clays in Mars soil - Evidence for their presence and role in Viking biology experimental results

    Science.gov (United States)

    Banin, A.; Rishpon, J.

    1979-01-01

    Evidence for the presence of smectite clays in Martian soils is reviewed and results of experiments with certain active clays simulating the Viking biology experiments are reported. Analyses of Martian soil composition by means of X-ray fluorescence spectrometry and dust storm spectroscopy and Martian geological history strongly suggest the presence of a mixture of weathered ferro-silicate minerals, mainly nontronite and montmorillonite, accompanied by soluble sulphate salts, as major constituents. Samples of montmorillonite and nontronite incubated with (C-14)-formate or the radioactive nutrient medium solution used in the Viking Labeled Release experiment, were found to produce patterns of release of radioactive gas very similar to those observed in the Viking experiments, indicating the iron-catalyzed decomposition of formate as the reaction responsible for the Viking results. The experimental results of Hubbard (1979) simulating the results of the Viking Pyrolytic Release experiment using iron montmorillonites are pointed out, and it is concluded that many of the results of the Viking biology experiments can be explained in terms of the surface activity of smectite clays in catalysis and adsorption.

  18. Gas diffusion, non-Darcy air permeability, and computed tomography images of a clay subsoil affected by compaction

    DEFF Research Database (Denmark)

    Schjønning, Per; Lamandé, Mathieu; Berisso, Feto Esimo

    2013-01-01

    Soil productivity and other soil functions are dependent on processes in the untilled subsoil. Undisturbed soil cores were collected at the 0.3- to 0.4-m depth from a heavy clay soil in Finland subjected to a single heavy traffic event by agricultural machinery three decades before sampling. Untr...

  19. Heavy metal contaminations in a soil-rice system: Identification of spatial dependence in relation to soil properties of paddy fields

    Energy Technology Data Exchange (ETDEWEB)

    Zhao Keli [Institute of Soil and Water Resources and Environmental Science, Zhejiang Provincial Key Laboratory of Subtropical Soil and Plant Nutrition, Zhejiang University, Hangzhou 310029 (China); School of Plant, Environmental and Soil Sciences, Louisiana State University AgCenter, Baton Rouge 70803 (United States); Liu Xingmei, E-mail: xmliu@zju.edu.cn [Institute of Soil and Water Resources and Environmental Science, Zhejiang Provincial Key Laboratory of Subtropical Soil and Plant Nutrition, Zhejiang University, Hangzhou 310029 (China); Xu Jianming, E-mail: jmxu@zju.edu.cn [Institute of Soil and Water Resources and Environmental Science, Zhejiang Provincial Key Laboratory of Subtropical Soil and Plant Nutrition, Zhejiang University, Hangzhou 310029 (China); Selim, H.M. [School of Plant, Environmental and Soil Sciences, Louisiana State University AgCenter, Baton Rouge 70803 (United States)

    2010-09-15

    In order to identify spatial relationship of heavy metals in soil-rice system at a regional scale, 96 pairs of rice and soil samples were collected from Wenling in Zhejiang province, China, which is one of the well-known electronic and electric waste recycling centers. The results indicated some studied areas had potential contaminations by heavy metals, especially by Cd. The spatial distribution of Cd, Cu, Pb and Zn illustrated that the highest concentrations were located in the northwest areas and the accumulation of these metals may be due to the industrialization, agricultural chemicals and other human activities. In contrast, the concentration of Ni decreased from east to west and the mean concentration was below the background value, indicating the distribution of Ni may be naturally controlled. Enrichment index (EI) was used to describe the availability of soil heavy metals to rice. The spatial distribution of EIs for Cd, Ni and Zn exhibited a west-east structure, which was similar with the spatial structures of pH, OM, sand and clay. Cross-correlograms further quantitatively illustrated the EIs were significantly correlated with most soil properties, among which; soil pH and OM had the strongest correlations with EIs. However, EI of Cu showed relative weak correlations with soil properties, especially soil pH and OM had no correlations with EI of Cu, indicating the availability of Cu may be influenced by other factors.

  20. Heavy metals in garden soils along roads in Szeged, Hungary

    Science.gov (United States)

    Szolnoki, Zsuzsanna; Farsang, Andrea

    2010-05-01

    The soils of the urban environment, owing to the various anthropogenic activities, can be contaminated by heavy metals. The traffic is well-known for more decades to be main source of heavy metals mostly in cities. The accumulation of these elements can have different effects, either directly endangering the natural soil functions, or indirectly endangering the biosphere by bio-accumulation and inclusion in the food chain. The hobby gardens and the vegetable gardens directly along roads can be potential risky for people since unknown amount of heavy metals can be accumulated into organization of local residents due to consumption of vegetables and fruits grown in their own garden. The aim of this study was to determine the heavy metal content of garden soils directly along roads with heavy traffic in order to assess possible risk for human health. The total content and the mobile content of Cd, Co, Cr, Cu, Ni, Pb and Zn have been determined in samples from garden soils along 5 busy roads of Szeged, South Hungary. Enrichment factor has been calculated with the help of control soil samples far from roads. The soil properties basically influencing on metal mobility have also been examined. Finally, the human health risk of these garden soils has been modelled by determination of health risk quotient (HRQ). As a result of our investigations, it can be claimed that mostly Cu, Zn and to a lesser degree the Ni, Cr and Pb accumulated in garden soils along roads depending on the traffic density. In general, the topsoils (0-10 cm) had higher amount of these metals rather than the subsoils (40-50 cm). Ni of these metals has approached; Cu has exceeded limit value while Pb is under it. Cd is very high in both soils along roads and control ones far from roads. Garden soils along the roads have such basic soil parameters (pH, mechanical soil type, humus content) that prove fairly high metal-binding capacity for these soils. Total risk of usage of these gardens (ingestion of soil

  1. Effect of Injecting Hydrogen Peroxide into Heavy Clay Loam Soil on Plant Water Status, NET CO2 Assimilation, Biomass, and Vascular Anatomy of Avocado Trees Efecto de la Inyección de Peróxido de Hidrógeno en Suelo Franco Arcilloso Pesado, sobre el Estado Hídrico, Asimilación Neta de CO2, Biomasa y Anatomía Vascular de Paltos

    OpenAIRE

    2009-01-01

    In Chile, avocado (Persea americana Mill.) orchards are often located in poorly drained, low-oxygen soils, situation which limits fruit production and quality. The objective of this study was to evaluate the effect of injecting soil with hydrogen peroxide (H2O2) as a source of molecular oxygen, on plant water status, net CO2 assimilation, biomass and anatomy of avocado trees set in clay loam soil with water content maintained at field capacity. Three-year-old ‘Hass’ avocado trees were planted...

  2. Influences of thermal decontamination on mercury removal, soil properties, and repartitioning of coexisting heavy metals.

    Science.gov (United States)

    Huang, Yu-Tuan; Hseu, Zeng-Yei; Hsi, Hsing-Cheng

    2011-08-01

    Thermal treatment is a useful tool to remove Hg from contaminated soils. However, thermal treatment may greatly alter the soil properties and cause the coexisting contaminants, especially trace metals, to transform and repartition. The metal repartitioning may increase the difficulty in the subsequent process of a treatment train approach. In this study, three Hg-contaminated soils were thermally treated to evaluate the effects of treating temperature and duration on Hg removal. Thermogravimetric analysis was performed to project the suitable heating parameters for subsequent bench-scale fixed-bed operation. Results showed that thermal decontamination at temperature>400°C successfully lowered the Hg content tosoil particle size was less significant, even when the soils were thermally treated to 550°C. Soil clay minerals such as kaolinite were shown to be decomposed. Aggregates were observed on the surface of soil particles after the treatment. The heavy metals tended to transform into acid-extractable, organic-matter bound, and residual forms from the Fe/Mn oxide bound form. These results suggest that thermal treatment may markedly influence the effectiveness of subsequent decontamination methods, such as acid washing or solvent extraction. Copyright © 2011 Elsevier Ltd. All rights reserved.

  3. Contribution of individual sorbents to the control of heavy metal activity in sandy soil.

    Science.gov (United States)

    Weng, L; Temminghoff, E J; Van Riemsdijk, W H

    2001-11-15

    A multisurface model is used to evaluate the contribution of various sorption surfaces to the control of heavy metal activity in sandy soil samples at pH 3.7-6.1 with different sorbent contents. This multisurface model considers soil as a set of independent sorption surfaces, i.e. organic matter (NICA-Donnan), clay silicate (Donnan), and iron hydroxides (DDL, CD-MUSIC). The activities of Cu2+, Cd2+, Zn2+, Ni2+, and Pb2+ in equilibrium with the soil have been measured using a Donnan membrane technique. The metal activities predicted by the model agree with those measured reasonably well over a wide concentration range for all the metals of interest except for Pb. The modeling results suggest that soil organic matter is the most important sorbent that controls the activity of Cu2+, Cd2+, Zn2+, and Ni2+ in these sandy soils. When metal loading is high in comparison with soil organic matter content, the contribution of clay silicates to metal binding becomes more important. Adsorption to iron hydroxides is found not significant in these samples for Cu, Cd, Zn, and Ni. However, for Pb the model estimates strong adsorption on iron hydroxides. The model predicts that acidification will not only lead to increased solution concentrations but also to a shift toward more nonspecific cation-exchange type binding especially for the metals Cd, Zn, and Ni. Lowering the pH has led to a loss of 56% of Cd, 69% of Zn, and 66% of Ni during 16 years due to increased leaching.

  4. Screening of heavy metal containing waste types for use as raw material in Arctic clay-based bricks.

    Science.gov (United States)

    Belmonte, Louise Josefine; Ottosen, Lisbeth M; Kirkelund, Gunvor Marie; Jensen, Pernille Erland; Vestbø, Andreas Peter

    2016-11-10

    In the vulnerable Arctic environment, the impact of especially hazardous wastes can have severe consequences and the reduction and safe handling of these waste types are therefore an important issue. In this study, two groups of heavy metal containing particulate waste materials, municipal solid waste incineration (MSWI) fly and bottom ashes and mine tailings (i.e., residues from the mineral resource industry) from Greenland were screened in order to determine their suitability as secondary resources in clay-based brick production. Small clay discs, containing 20 or 40% of the different particulate waste materials, were fired and material properties and heavy metal leaching tests were conducted before and after firing. Remediation techniques (washing in distilled water and electrodialytical treatment) applied to the fly ash reduced leaching before firing. The mine tailings and bottom ash brick discs obtained satisfactory densities (1669-2007 kg/m(3)) and open porosities (27.9-39.9%). In contrast, the fly ash brick discs had low densities (1313-1578 kg/m(3)) and high open porosities (42.1-51. %). However, leaching tests on crushed brick discs revealed that heavy metals generally became more available after firing for all the investigated materials and that further optimisation is therefore necessary prior to incorporation in bricks.

  5. Effects of Humic Acid and Solution pH on Dispersion of Na—and Ca—Soil Clays

    Institute of Scientific and Technical Information of China (English)

    LANYEQING; HUQIONGYING; 等

    1996-01-01

    Dispersed soil clays have a negative impact on soil structure and contribute to soil erosion and contaminant movement.In this study,two typical soils from the south of China were chosen for investigating roles of pH and humic acid(HA) on dispersion of soil clays.Critical flocculation concentration (CFC) of the soil clay suspension was determined by using light transmission at a wavelength of 600 nm.The results indicated that effects of pH and HA on dispersion of the soil clays were closely related to the type of the major minerals makin up the soil and to the valence of the exchangeable cations as well.At four rates of pH(4,6,8and 10),the CFC for the Na-yellow-brown soil treated with H2O2 was increased from 0.32 to 0.56,6.0 to 14.0,10.0 to 24.6 and 26.0 to 52.0mmol L-1 NaCl,respectively when Na-HA was added at the rate of from 0 to 40mgL-1,With the same Na-HA addition and three pH(6,8and 10)treatments,the CFC for the Na-red soil was incresed from 0.5 to 20.0,1.0 to 40.0 and 6.0 to 141.0mmol L-1 NaCl,respectively.Obviously,pH and HA has greater effects on clay dispersion of the red soil(dominated by 1:1 minerals and oxides) than on that of the yellow-brown soil(dominated by 2:1minerals).However,at three rates of pH(6,8and 10) and with the addition of Ca-HA from 0 to 40mg L-1,the CFC of the Ca-yellow-brown soil and Ca-red soil treated with H2O2 was increased from 0.55 to 0.81,0.75 to 1.28,0.55 to 1.45and 0.038 to 0.266.0.25 to 0.62,0.7to 1.6mmol CaCl2 L-1,respectively.So,Na-soil claye are more sensitive to pH and HA than Ca-soil clays.

  6. Let's Break it Down: A Study of Organic Decomposition Rates in Clay Soil

    Science.gov (United States)

    Weiss, E.

    2016-12-01

    In this experiment I will be testing if temperature affects the organic decomposition rates in clay soil. I will need to be able to clean and weigh each filter paper without disrupting my data damaging or brushing off additional paper material. From there I need to be able to analyze and interpret my data to factor anything else that may affect the decomposition rates in the soil. Soil decomposers include bacteria and fungi. They obtain energy from plant and animal detritus through aerobic decomposition, which is similar to how humans break down sugar. The formula is: C6H12O6 + O2 → CO2 + H2O + energy. Besides oxygen and sugar the organisms need nutrients such as water and sustainable temperatures. Decomposition is important to us because it helps regulate soil structure, moisture, temperature, and provides nutrients to soil organisms. This matters on a global scale since decomposers release a large amount of carbon when breaking down matter, which contributes to greenhouse gasses such as carbon dioxide and methane. These greenhouse gasses affect the earth's climate. People who care about decomposition are farmers and those in agriculture, as well as environmental scientists. Even national parks might care because decomposition may affect park safety, how the park looks, and the amount of plants and wildlife. Things that can affect decomposition are the decomposers in the soil, temperature, and water or moisture. My secondary research also showed that PH and chemical composition of the soil affect the rate of decomposition.Cold or freezing temperatures can help preserve organic material in soil because it freezes the soil and moisture, making it too dense for the organic decomposers to break down the organic matter. Soil also can be preserved by drying out and being stored at 4º Celsius (or 39º Fahrenheit) for 28 days. However, soil can degrade slowly in these conditions because it is not frozen and can be oxidized.

  7. Study of Various Techniques for Improving Weak and Compressible Clay Soil under a High Earth Embankment

    Directory of Open Access Journals (Sweden)

    Zein A.K. M.

    2014-04-01

    Full Text Available This paper investigates the suitability of three soil improvement techniques for the construction of a high earth embankment on thick weak and highly compressible clay soil. The eastern approach embankment of Alhalfaya Bridge on the River Nile linking Khartoum North and Omdurman cities was chosen as a case study and a comprehensive site investigation program was carried out to determine the properties the subsurface soils. The study results showed that unless the subsurface soils have been improved they may fail or undergo excessively large settlements due to the embankment construction. Three ground improvement techniques based on the principles of the “staged construction method, SCM”, “vertical sand drain, VSD” and “sand compaction piles, SCP” of embankment foundation soil treatment are discussed and evaluated. Embankment design options based on applications of the above methods have been proposed for foundation treatment to adequately support embankment loads. A method performance evaluation based on the improvement of soil properties achieved; the time required for construction and compared estimated costs criteria was made to assess the effectiveness and expected overall performance. Adoption of any of the soil improvement techniques considered depends mainly on the most critical and decisive factor governing the embankment design. Based on the overall performance for the embankment case studied, the sand drains is considered as the most appropriate improvement method followed by the sand compaction piles technique whereas the staged construction method showed the poorest overall performance.

  8. Clay content prediction using on-the-go proximal soil sensor fusion

    DEFF Research Database (Denmark)

    Tabatabai, Salman; Knadel, Maria; Greve, Mogens Humlekrog

    least squares regression (PLSR) and support vector machines regression (SVMR) were performed using VNIR spectra, EC and soil temperature as predictors and clay content as the response variable. PLSR and SVMR models were validated using full and 20-segment cross-validation respectively. The results were......There is a growing demand for high quality and reliable data on different soil constituents and properties in different scales. Research in the past decade has shown that traditional soil sampling cannot supply for this demand. Modern methods such as visible-near infrared (VNIR) and mid...... in different regions in Denmark. 125 calibration samples were collected from the points found by clustering the principal components (PC) of the spectra. Several pretreatments such as mean-centering, auto-scaling, spectral transformations and removal of faulty measurements were performed on the data. Partial...

  9. Construction and validation of two metagenomic DNA libraries from Cerrado soil with high clay content.

    Science.gov (United States)

    de Castro, Alinne Pereira; Quirino, Betania Ferraz; Allen, Heather; Williamson, Lynn L; Handelsman, Jo; Krüger, Ricardo Henrique

    2011-11-01

    A challenge of metagenomic studies is in the extraction and purification of DNA from environmental samples. The soils of the Cerrado region of Brazil present several technical difficulties to DNA extraction: high clay content (>55% w/w), low pH (4.7) and high iron levels (146 ppm). Here we describe for the first time the efficient recovery and purification of microbial DNA associated with these unusual soil characteristics and the construction and validation of two metagenomic libraries: a 150,000 clones library with insert size of approximately 8 kb and a 65,000 clones library with insert size of approximately 35 kb. The construction of these metagenomic libraries will allow the biotechnological exploitation of the microbial community present in the soil from this endangered biome.

  10. The Adsorption Capacity and Geotechnical Properties of Modified Clay Containing SSA Used as Landfill Liner-Soil Materials

    Directory of Open Access Journals (Sweden)

    Haijun Lu

    2015-01-01

    Full Text Available The potential of clay containing 0~5% sewage sludge ash (SSA is assessed for use as a landfill liner-soil material. Low temperature N2 adsorption, batch adsorption, permeability, and unconfined compressive strength tests are performed to evaluate pore structure, adsorption capacity, hydraulic conductivity, and unconfined compressive strength of the clays. The pore size distribution of the modified clay containing SSA is mainly composed of micropores (<2 nm and mesopores (2~7 nm. With the increasing of SSA from 0% to 5%, the adsorption capacity of Zn(II and Cu(II to the clay increases 37% and 273%, respectively. The hydraulic conductivity of modified clay is from 3.62 × 10−8 to 2.17 × 10−8 cm/s. At SSA = 3%, the unconfined compressive strength of the clay reaches the maximum value of 601.1 kPa. After the clay containing SSA is contaminated by acid and alkali chemical solutions, the amount of mesopores and hydraulic conductivity increase. The adsorption capacity and unconfined compressive strength of contaminated clay decrease about 2∼44% and 25.7∼38.2%, respectively. The modified clay containing SSA can meet the adsorption and geotechnical requirement of landfill liners.

  11. Physicochemical Properties, Micromorphology and Clay Mineralogy of Soils Affected by Geological Formations, Geomorphology and Climate

    Directory of Open Access Journals (Sweden)

    A. Bayat

    2017-01-01

    Full Text Available Introduction: Soil genesis and development in arid and semi-arid areas are strongly affected by geological formations and geomorphic surfaces. Various morphological, physical, and geochemical soil properties at different geomorphic positions are usually attributed to different soil forming factors including parent material and climate. Due to variations in climate, geological formations (Quaternary, Neogene and Cretaceous and geomorphology, the aim of the present research was the study of genesis, development, clay mineralogy, and micromorphology of soils affected by climate, geology and geomorphology in Bardsir area, Kerman Province. Materials and Methods: The study area, 25000 ha, starts from Bardsir and extends to Khanesorkh elevations close to Sirjan city. The climate of the area is warm and semi-arid with mean annual temperature and precipitation of 14.9 °C and 199 mm, respectively. Soil moisture and temperature regimes of the area are aridic and mesic due to 1:2500000 map, provided by Soil and Water Research Institute. Moving to west and southwest, soil moisture regime of the area changes to xeric with increasing elevation. Using topography and geology maps (1:100000 together with Google Earth images, geomorphic surfaces and geologic formations of the area were investigated. Mantled pediment (pedons 1, 3, 7, and 8, rock pediment (pedon 2, semi-stable alluvial plain (pedon 6, unstable alluvial plain (pedon 5, piedmont plain (pedons 9 and 11, intermediate surface of alluvial plain and pediment (pedon 4, and old river terrace (pedon 10 are among geomorphic surfaces investigated in the area. Mantled pediment is composed of young Quaternary sediments and Cretaceous marls. Rock pediments are mainly formed by Cretaceous marls. Quaternary formations are dominant in alluvial plains. Alluvial terraces and intermediate surface of alluvial plain and pediment are dominated by Neogene conglomerates. Siltstone, sandstone, and Neogene marls together with

  12. The effects of worms, clay and biochar on CO2 emissions during production and soil application of co-composts

    Science.gov (United States)

    Barthod, Justine; Rumpel, Cornélia; Paradelo, Remigio; Dignac, Marie-France

    2016-12-01

    In this study we evaluated CO2 emissions during composting of green wastes with clay and/or biochar in the presence and absence of worms (species of the genus Eisenia), as well as the effect of those amendments on carbon mineralization after application to soil. We added two different doses of clay, biochar or their mixture to pre-composted green wastes and monitored carbon mineralization over 21 days in the absence or presence of worms. The resulting co-composts and vermicomposts were then added to a loamy Cambisol and the CO2 emissions were monitored over 30 days in a laboratory incubation. Our results indicated that the addition of clay or clay/biochar mixture reduced carbon mineralization during co-composting without worms by up to 44 %. In the presence of worms, CO2 emissions during composting increased for all treatments except for the low clay dose. The effect of the amendments on carbon mineralization after addition to soil was small in the short term. Overall, composts increased OM mineralization, whereas vermicomposts had no effect. The presence of biochar reduced OM mineralization in soil with respect to compost and vermicompost without additives, whereas clay reduced mineralization only in the composts. Our study indicates a significant role of the conditions of composting on mineralization in soil. Therefore, the production of a low CO2 emission amendment requires optimization of feedstocks, co-composting agents and worm species.

  13. Development and evaluation of a new sorption model for organic cations in soil: contributions from organic matter and clay minerals.

    Science.gov (United States)

    Droge, Steven T J; Goss, Kai-Uwe

    2013-12-17

    This study evaluates a newly proposed cation-exchange model that defines the sorption of organic cations to soil as a summed contribution of sorption to organic matter (OM) and sorption to phyllosilicate clay minerals. Sorption to OM is normalized to the fraction organic carbon (fOC), and sorption to clay is normalized to the estimated cation-exchange capacity attributed to clay minerals (CECCLAY). Sorption affinity is specified to a fixed medium composition, with correction factors for other electrolyte concentrations. The model applies measured sorption coefficients to one reference OM material and one clay mineral. If measured values are absent, then empirical relationships are available on the basis of molecular volume and amine type in combination with corrective increments for specific polar moieties. The model is tested using new sorption data generated at pH 6 for two Eurosoils, one enriched in clay and the other, OM, using 29 strong bases (pKa > 8). Using experimental data on reference materials for all tested compounds, model predictions for the two soils differed on average by only -0.1 ± 0.4 log units from measured sorption affinities. Within the chemical applicability domain, the model can also be applied successfully to various reported soil sorption data for organic cations. Particularly for clayish soils, the model shows that sorption of organic cations to clay minerals accounts for more than 90% of the overall affinity.

  14. EVALUATION OF THE POSSIBILITY OF ENERGY USE BLACK LOCUST (Robinia pseudoacacia L. DENDROMASS ACQUIRED IN FOREST STANDS GROWING ON CLAY SOILS

    Directory of Open Access Journals (Sweden)

    Artur KRASZKIEWICZ

    2013-03-01

    Full Text Available In this study, in the assessed capacity using for energy purposes dendromass black locust acquired in three forest stands growing on clay soils. It was found that the test conditions black locust grows well in clay soils very rich, and its timber, in terms of energy use, has a desirable physicochemical properties. Whereas the energy of black locust plantations located on clay soils may be an alternative to gain valuable energy resource.

  15. Microwave Acid Extraction to Analyze K and Mg Reserves in the Clay Fraction of Soils

    Directory of Open Access Journals (Sweden)

    Araína Hulmann Batista

    Full Text Available ABSTRACT: Extraction of K and Mg with boiling 1 mol L-1 HNO3 in an open system for predicting K and Mg uptake by plants is a method of low reproducibility. The aim of this study was to compare the extraction capacity of different acid methods relative to hydrofluoric acid extraction for K and Mg. A further objective was to develop a chemical extraction method using a closed system (microwave for nonexchangeable and structural forms of these nutrients in order to replace the traditional method of extraction with boiling HNO3 on a hot plate (open system. The EPA 3051A method can be used to estimate the total content of K in the clay fraction of soils developed from carbonate and phyllite/mica schist rocks. In the clay fraction of soils developed from basalt, recoveries of K by the EPA 3051A (pseudo-total method were higher than for the EPA 3052 (total hydrofluoric extraction method. The relative abundance of K and Mg for soils in carbonate rocks, phyllite/mica schist, granite/gneiss, and basalt determined by aqua regia digestion is unreliable. The method using 1 mol L-1 HNO3 in an closed system (microwave showed potential for replacing the classical method of extraction of nonexchangeable forms of K (boiling 1 mol L-1 HNO3 in an open system - hot plate and reduced the loss of Si by volatilization.

  16. Enrichment of trace elements in the clay size fraction of mining soils.

    Science.gov (United States)

    Gomes, Patrícia; Valente, Teresa; Braga, M Amália Sequeira; Grande, J A; de la Torre, M L

    2016-04-01

    Reactive waste dumps with sulfide minerals promote acid mine drainage (AMD), which results in water and soil contamination by metals and metalloids. In these systems, contamination is regulated by many factors, such as mineralogical composition of soil and the presence of sorption sites on specific mineral phases. So, the present study dedicates itself to understanding the distribution of trace elements in different size fractions (mining soils and to evaluate the relationship between chemical and mineralogical composition. Cerdeirinha and Penedono, located in Portugal, were the waste dumps under study. The results revealed that the two waste dumps have high degree of contamination by metals and arsenic and that these elements are concentrated in the clay size fraction. Hence, the higher degree of contamination by toxic elements, especially arsenic in Penedono as well as the role of clay minerals, jarosite, and goethite in retaining trace elements has management implications. Such information must be carefully thought in the rehabilitation projects to be planned for both waste dumps.

  17. Dialysis experiments for assessing the pH-dependent sorption of sulfonamides to soil clay fractions.

    Science.gov (United States)

    Anskjær, G G; Krogh, K A; Halling-Sørensen, B

    2014-01-01

    Equilibrium dialysis experiments, a novel approach for conducting soil/water distribution experiments in environmental samples, were found to be applicable for assessing pH-dependent partitioning and to quantify the sorption of three sulfonamides, sulfadiazine, sulfadoxine, and sulfacetamide. Clay fractions from two agricultural soils including both particulate and dissolved soil matter were used in the experiments to achieve a high sorption capacity when varying pH in a relevant environmental range. Stabilizing and controlling pH was done by using organic buffers. In two clay fractions, Kd for sulfadiazine was determined to be 43 and 129 L kg(-1), and 1.3 and 4.6 L kg(-1) at pH 4.0 and pH 9.0, respectively. This corresponded to Kd for the neutral and ionized form of sulfadiazine, respectively. The difference in sulfadiazine sorption between the two clay fractions could to some extent be related to the difference in the amount of organic carbon. Sorption experiments with sulfacetamide and sulfadoxine also exhibited decreasing sorption when increasing pH. At low pH, maximum Kd for sulfacetamide and sulfadoxine was determined to be 83 and 211 L kg(-1), respectively, while at high pH minimum Kd was 4.8 and 1.2 L kg(-1), respectively. Hence, compound speciation was important for the quantity of sorbed sulfonamide, which was confirmed by a correlation (R(2)) close to unity, when using the experimentally obtained Kd values with a simple model weighing the contribution from the neutral and the ionized compound, respectively.

  18. Water and solute transport in agricultural soils predicted by volumetric clay and silt contents

    Science.gov (United States)

    Karup, Dan; Moldrup, Per; Paradelo, Marcos; Katuwal, Sheela; Norgaard, Trine; Greve, Mogens H.; de Jonge, Lis W.

    2016-09-01

    Solute transport through the soil matrix is non-uniform and greatly affected by soil texture, soil structure, and macropore networks. Attempts have been made in previous studies to use infiltration experiments to identify the degree of preferential flow, but these attempts have often been based on small datasets or data collected from literature with differing initial and boundary conditions. This study examined the relationship between tracer breakthrough characteristics, soil hydraulic properties, and basic soil properties. From six agricultural fields in Denmark, 193 intact surface soil columns 20 cm in height and 20 cm in diameter were collected. The soils exhibited a wide range in texture, with clay and organic carbon (OC) contents ranging from 0.03 to 0.41 and 0.01 to 0.08 kg kg- 1, respectively. All experiments were carried out under the same initial and boundary conditions using tritium as a conservative tracer. The breakthrough characteristics ranged from being near normally distributed to gradually skewed to the right along with an increase in the content of the mineral fines (particles ≤ 50 μm). The results showed that the mineral fines content was strongly correlated to functional soil structure and the derived tracer breakthrough curves (BTCs), whereas the OC content appeared less important for the shape of the BTC. Organic carbon was believed to support the stability of the soil structure rather than the actual formation of macropores causing preferential flow. The arrival times of 5% and up to 50% of the tracer mass were found to be strongly correlated with volumetric fines content. Predicted tracer concentration breakthrough points as a function of time up to 50% of applied tracer mass could be well fitted to an analytical solution to the classical advection-dispersion equation. Both cumulative tracer mass and concentration as a function of time were well predicted from the simple inputs of bulk density, clay and silt contents, and applied tracer

  19. Magnetic properties of alluvial soils polluted with heavy metals

    Science.gov (United States)

    Dlouha, S.; Petrovsky, E.; Boruvka, L.; Kapicka, A.; Grison, H.

    2012-04-01

    Magnetic properties of soils, reflecting mineralogy, concentration and grain-size distribution of Fe-oxides, proved to be useful tool in assessing the soil properties in terms of various environmental conditions. Measurement of soil magnetic properties presents a convenient method to investigate the natural environmental changes in soils as well as the anthropogenic pollution of soils with several risk elements. The effect of fluvial pollution with Cd, Cu, Pb and Zn on magnetic soil properties was studied on highly contaminated alluvial soils from the mining/smelting district (Příbram; CZ) using a combination of magnetic and geochemical methods. The basic soil characteristics, the content of heavy metals, oxalate, and dithionite extractable iron were determined in selected soil samples. Soil profiles were sampled using HUMAX soil corer and the magnetic susceptibility was measured in situ, further detailed magnetic analyses of selected distinct layers were carried out. Two types of variations of magnetic properties in soil profiles were observed corresponding to indentified soil types (Fluvisols, and Gleyic Fluvisols). Significantly higher values of topsoil magnetic susceptibility compared to underlying soil are accompanied with high concentration of heavy metals. Sequential extraction analysis proved the binding of Pb, Zn and Cd in Fe and Mn oxides. Concentration and size-dependent parameters (anhysteretic and isothermal magnetization) were measured on bulk samples in terms of assessing the origin of magnetic components. The results enabled to distinguish clearly topsoil layers enhanced with heavy metals from subsoil samples. The dominance of particles with pseudo-single domain behavior in topsoil and paramagnetic/antiferromagnetic contribution in subsoil were observed. These measurements were verified with room temperature hysteresis measurement carried out on bulk samples and magnetic extracts. Thermomagnetic analysis of magnetic susceptibility measured on

  20. Effect of humic acid on transformation of soil heavy metals

    Science.gov (United States)

    Wu, Shengzhe; Li, Rui; Peng, Shuyang; Liu, Qiuyong; Zhu, Xi

    2017-06-01

    The pattern of transformation among different fractions of heavy metals in soil draws great attention. This article investigated the effect of humic acid on soil heavy metal under different pH and temperature. The results showed that with the increasing of the concentration of humic acid, the concentration of available Cu, Pb decreased greatly, though the decrease of available Cd was light. Also, pH of soil had certain impact on the concentration of available Cu, Pb, Cd while the influence of environmental temperature was minor. The removal efficiency of contaminated soil was 57.283% (Cu), 2.645% (Cd) and 15.485% (Pb) while it could reach more than 98% in contaminated solution.

  1. [Heavy Metals Accmultio in the Caofeidian Reclamation Soils: Indicated by Soil Magnetic Susceptibility].

    Science.gov (United States)

    Xue, Yong; Zhou, Qian; Li, Yuan; Zhang, Hai-bo; Hu, Xue-feng; Luo, Yong-ming

    2016-04-15

    The environmental magnetism method has been widely applied to identify soil heavy metal pollution, which is characterized by simplicity, efficiency, non-destructivity and sensitivity. The present study used magnetic susceptibility to assess the accumulation of heavy metals in soils of the Caofeidian industrial zone which is a typical reclamation area in northern China. The study area was divided into three sub-zones based on the function, including industrial zone, living zone, natural tidal flat and wetland. A total of 35 topsoil samples (0-10 cm) and 3 soil profiles were collected from the three sub-zones. Magnetic susceptibility (X(lf)), iron oxide (Fe2O3) contents and heavy metals contents (Cr, Ni, Cu, Zn, As, Pb, Mn and V) of the samples were analyzed. The results showed that X(lf) values and heavy metals contents exhibited higher spatial variability in the top soil of the industrial zone, indicating the severe impacts of industrial activities. In the soil profiles of the industrial and living zones, all heavy metals were enriched to different degrees in the upper layer (0-20 cm). However, there was no significant change of heavy metal contents in the soil profiles of tidal flat which was far from the industrial area. The X(lf) value was significantly (P soil. This indicated that X(lf) could be used as an indicator for heavy metal accumulation in the industrial zone. However, the X(lf) value was not suitable to be an indicator to show the heavy metal accumulation in the soils of living zone and natural tidal flat. This might be associated with the different sources of magnetic materials among the different sub-zones and the special characteristics of the soils in the tidal flat and wetland.

  2. Using digital elevation models as an environmental predictor for soil clay contents

    DEFF Research Database (Denmark)

    Greve, Mogens Humlekrog; Bou Kheir, Rania; Greve, Mette Balslev

    2012-01-01

    The objective of this study was to evaluate the Shuttle Radar Topography Mission (SRTM) digital elevation model (DEM) as an environmental predictor for soil clay content (SCC). It was based on the applicability of different DEMs, i.e., SRTM with 90-m resolution and airborne Light Detection...... and Ranging (LIDAR) (in 24- and 90-m resolution), using regression-tree analysis. Ten terrain parameters were generated from these DEMs. These terrain parameters were used along other environmental variables to statistically explain SCC content in Denmark. Results indicated that the SRTM tree model (T1: 90-m...

  3. Dynamic compaction treatment technology research of red clay soil embankment in southern mountains

    Institute of Scientific and Technical Information of China (English)

    刘建华; 袁剑波; 熊虎; 陈伟

    2008-01-01

    High liquid limit soil generally adopted in expressway embankment construction of southern mountains, which often expresses some characteristics including high moisture content, high porosity ratio, low permeability, high compressibility, certain disintegration, and so on. Spring soil phenomenon and inhomogeneous compaction have effects on the quality of embankment construction, just because the water in soil is difficult to evaporate. Based on the study of reinforcement mechanism for high liquid limit soil, in situ tests for dynamic compaction treatment in Yizhang-Fengtouling expressway embankment were developed. The reliable and economical dynamic compaction treatment methods and the construction technology for large range high liquid limit soil embankment in southern mountains expressway were discussed. In the process, convenient measurement methods were adopted to evaluate the treatment effects. The test results show that the dynamic compaction method has good treatment effects on the local red clay embankment. The embankment compaction degree is improved with compactness coming to 90% around tamping pits and compactness over 95% in tamping pits interior after tamping. The bearing capacity, the physical mechanic-property and the shear strength for soil are obviously improved, which are enhanced with cohesive strength increasing over 10 kPa and compression modulus increasing over 3 MPa.

  4. Carbon-Nitrogen Relationships during the Humification of Cellulose in Soils Containing Different Amounts of Clay

    DEFF Research Database (Denmark)

    Sørensen, Lasse Holst

    1981-01-01

    the 1st mo. of incubation at temperatures of 10, 20 and 30.degree. C, respectively, 38-65% of the labeled C added in cellulose had disappeared from the soils as CO2, and 60-nearly 100% of the labeled N added as NH4+ were incorporated into organic forms. The retention of total labeled C was largest....... Some of the labeled organic N when mineralized was re-incorporated into organic compounds containing increasing proportions of native soil-C, whereas labeled C when mineralized as CO2 disappeared from the soils. The amount of labeled amino acid-C, formed during decomposition of the labeled cellulose......14C-labeled cellulose and 15N-labeled (NH4)2SO4 were added to 4 soils with clay contents of 4, 11, 18 and 34%, respectively. Labeled cellulose was added to each soil in amounts corresponding to 1, 2 and 4 mg Cg-1 soil, respectively, and labeled NH4+ at the rate of 1 mg N/25 mg labeled C. After...

  5. Using biopolymers to remove heavy metals from soil and water

    Energy Technology Data Exchange (ETDEWEB)

    Krishnamurthy, S.; Frederick, R.M.

    1993-11-19

    Chemical remediation of soil may involve the use of harsh chemicals that generate waste streams, which may adversely affect the soil's integrity and ability to support vegetation. This article reviews the potential use of benign reagents, such as biopolymers, to extract heavy metals. The biopolymers discussed are chitin and chitosan, modified starch, cellulose, and polymer-containing algae. (Copyright (c) Remediation 1994.)

  6. Chemometric interpretation of heavy metal patterns in soils worldwide.

    Science.gov (United States)

    Skrbić, Biljana; Durisić-Mladenović, Natasa

    2010-09-01

    Principal component analysis (PCA) was applied on data sets containing levels of six heavy metals (Pb, Cu, Zn, Cd, Ni, Cr) in soils from different parts of the world in order to investigate the information captured in the global heavy metal patterns. Data used in this study consisted of the heavy metal contents determined in 23 soil samples from and around the Novi Sad city area in the Vojvodina Province, northern part of Serbia, together with those from the city of Banja Luka, the second largest city in Bosnia and Herzegovina, and the ones reported previously in the relevant literature in order to evaluate heavy metal distribution pattern in soils of different land-use types, as well as spatial and temporal differences in the patterns. The chemometric analysis was applied on the following input data sets: the overall set with all data gathered in this study containing 264 samples, and two sub sets obtained after dividing the overall set in accordance to the soil metal index, SMI, calculated here, i.e. the set of unpolluted soils having SMIs100%. Additionally, univariate descriptive statistics and the Spearman's non-parametric rank correlation coefficients were calculated for these three sets. A Box-Cox transformation was used as a data pretreatment before the statistical methods applied. According to the results, it was seen that anthropogenic and background sources had different impact on the data variability in the case of polluted and unpolluted soils. The sample discrimination regarding the land-use types was more evident for the unpolluted soils than for the polluted ones. Using linear discriminant analysis, content of Cu was determined as a variable with a major discriminant capacity. The correct classification of 73.3% was achieved for predefined land-use types. Classification of the samples in accordance to the pollution level expressed as SMI was necessary in order to avoid the "masking" effect of the polluted soil patterns over the non-polluted ones.

  7. Different Behavior of Enteric Bacteria and Viruses in Clay and Sandy Soils after Biofertilization with Swine Digestate

    Science.gov (United States)

    Fongaro, Gislaine; García-González, María C.; Hernández, Marta; Kunz, Airton; Barardi, Célia R. M.; Rodríguez-Lázaro, David

    2017-01-01

    Enteric pathogens from biofertilizer can accumulate in the soil, subsequently contaminating water and crops. We evaluated the survival, percolation and leaching of model enteric pathogens in clay and sandy soils after biofertilization with swine digestate: PhiX-174, mengovirus (vMC0), Salmonella enterica Typhimurium and Escherichia coli O157:H7 were used as biomarkers. The survival of vMC0 and PhiX-174 in clay soil was significantly lower than in sandy soil (iT90 values of 10.520 ± 0.600 vs. 21.270 ± 1.100 and 12.040 ± 0.010 vs. 43.470 ± 1.300, respectively) and PhiX-174 showed faster percolation and leaching in sandy soil than clay soil (iT90 values of 0.46 and 2.43, respectively). S. enterica Typhimurium was percolated and inactivated more slowly than E. coli O157:H7 (iT90 values of 9.340 ± 0.200 vs. 6.620 ± 0.500 and 11.900 ± 0.900 vs. 10.750 ± 0.900 in clay and sandy soils, respectively), such that E. coli O157:H7 was transferred more quickly to the deeper layers of both soils evaluated (percolation). Our findings suggest that E. coli O157:H7 may serve as a useful microbial biomarker of depth contamination and leaching in clay and sandy soil and that bacteriophage could be used as an indicator of enteric pathogen persistence. Our study contributes to development of predictive models for enteric pathogen behavior in soils, and for potential water and food contamination associated with biofertilization, useful for risk management and mitigation in swine digestate recycling. PMID:28197137

  8. Characterisation of actinomycetes community from the heavy metals polluted soil

    Directory of Open Access Journals (Sweden)

    Monika Vítězová

    2013-01-01

    Full Text Available The isolation of actinomycetes was performed from soil samples influenced by car-traffic. The acute toxicity of soil leaches was tested by the help of Microtox® bioassay testing system which uses freeze dried luminescent bacteria Photobacterium phosphoreum as the test organisms. The content of heavy metals in biomass of soil microorganisms and in whole soil samples was determinate. 115 strains of actinomycetes were isolated and their total numbers in soil samples were estimated. The acute toxicity of soil influenced the total numbers of actinomycetes. By the help of DNA-DNA reassociation procedure the generic diversity of bacteria was estimated. The identification and differentiation of streptomycetes from the total isolated actinomycetes was made using specific morphological criteria and the gas chromatography-fatty acid methyl ester (GC-FAME analysis. FAME method is adequate only for differentiation of members of genus Streptomyces from other actinomycetes because of their characteristical profile of fatty acids.

  9. Heavy metal content (Cd, Ni, Cr and Pb) in soil amendment with a low polluted biosolid

    Science.gov (United States)

    Gomez Lucas, Ignacio; Lag Brotons, Alfonso; Navarro-Pedreño, Jose; Belén Almendro-Candel, Maria; Jordán, Manuel M.; Bech, Jaume; Roca, Nuria

    2016-04-01

    The progressively higher water quality standards in Europe has led to the generation of large quantities of sewage sludge derived from wastewater treatment (Fytili and Zabaniotou 2008). Composting is an effective method to minimize these risks, as pathogens are biodegraded and heavy metals are stabilized as a result of organic matter transformations (Barker and Bryson 2002; Noble and Roberts 2004). Most of the studies about sewage sludge pollution are centred in medium and high polluted wastes. However, the aim of this study was to assess the effects on soil heavy metal content of a low polluted sewage sludge compost in order to identify an optimal application rate based in heavy metal concentration under a period of cultivation of a Mediterranean horticultural plant (Cynara carducnculus). The experiment was done between January to June: rainfall was 71 mm, the volume of water supplied every week was 10.5 mm, mean air temperatures was 14.2, 20.4 (maximum), and 9.2◦C (minimum). The soil was a clay-loam anthrosol (WRB 2006). The experimental plot (60 m2) was divided into five subplots with five treatments corresponding to 0, 2, 4, 6, and 8 kg compost/m2. Three top-soil (first 20 cm) samples from each treatment were taken (January, April and June) and these parameters were analysed: pH, electrical conductivity, organic matter and total content of heavy metals (microwave acid digestion followed by AAS-spectrometry determination). The results show that sewage sludge compost treatments increase the organic matter content and salinity (electrical conductivity of the soils) and diminish the pH. Cd and Ni total content in top-soil was affected and both slightly reduce their concentration. Pb and Cr show minor changes. In general, the application of this low polluted compost may affect the mobility of Cd and Ni due to the pH modification and the water added by irrigation along time but Pb and Cr remain their content in the top-soil. References Barker, A.V., and G.M. Bryson

  10. Irrigation with saline-sodic water: effects on two clay soils

    Directory of Open Access Journals (Sweden)

    Giovanna Cucci

    2013-05-01

    Full Text Available The results of a 4-year experiment aimed at evaluating the effect of irrigation with saline-sodic water on the soil are reported. The research was carried out at the Campus of the Agricultural Faculty of Bari University (Italy on 2 clay soils (Bologna – T1 and Locorotondo – T2. The soils were cropped to borlotto bean (Phaseolus vulgaris L., capsicum (Capsicum annuum L., sunflower (Helianthus annuus L., wheat (Triticum durum Desf grown in succession; the crops were irrigated with 9 saline-sodic types of water and subjected to two different leaching fractions (10% and 20% of the watering volume. The 9 solutions were obtained dissolving in de-ionised water weighted amounts of sodium chloride (NaCl and calcium chloride (CaCl2, deriving from the combination of 3 saline concentrations and 3 sodicity levels. The crops were irrigated whenever the water lost by evapotranspiration from the soil contained in the pots was equal to 30% of the soil maximum available water. The results showed that, though the soils were leached during the watering period, they showed a high salt accumulation. Consequently, the saturated soil extract electrical conductivity increased from initial values of 0.65 and 0.68 dS m-1 to 11.24 and 13.61 dS m-1 at the end of the experiment, for the soils T1 and T2, respectively. The saline concentration increase in irrigation water caused in both soils a progressive increase in exchangeable sodium, and a decrease in exchangeable calcium and non-significant variations in exchangeable potassium (K and magnesium (Mg.

  11. Risk assessment of gas oil and kerosene contamination on some properties of silty clay soil.

    Science.gov (United States)

    Fallah, M; Shabanpor, M; Zakerinia, M; Ebrahimi, S

    2015-07-01

    Soil and ground water resource pollution by petroleum compounds and chemical solvents has multiple negative environmental impacts. The aim of this research was to investigate the impacts of kerosene and gas oil pollutants on some physical and chemical properties, breakthrough curve (BTC), and water retention curve (SWRC) of silty clay soil during a 3-month period. Therefore, some water-saturated soils were artificially contaminated in the pulse condition inside some glassy cylinders by applying half and one pore volume of these pollutants, and then parametric investigations of the SWRC were performed using RETC software for Van Genukhten and Brooks-Corey equations in the various suctions and the soil properties were determined before and after pollution during 3 months. The results showed that gas oil and kerosene had a slight effect on soil pH and caused the cumulative enhancement in the soil respiration, increase in the bulk density and organic matter, and reduction in the soil porosity and electrical and saturated hydraulic conductivity. Furthermore, gas oil retention was significantly more than kerosene (almost 40%) in the soil. The survey of SWRC indicated that the contaminated soil samples had a little higher amount of moisture retention (just under 15% in most cases) compared to the unpolluted ones during this 3-month period. The parametric analysis of SWRC demonstrated an increase in the saturated water content, Θ s, from nearly 49% in the control sample to just under 53% in the polluted ones. Contaminants not only decreased the residual water content, Θ r, but also reduced the SWRC gradient, n, and amount of α parameter. The evaluation of both equations revealed more accurate prediction of SWRC's parameters by Van Genukhten compared to those of Brooks and Corey.

  12. Measurements of the streaming potential of clay soils from tropical and subtropical regions using self-made apparatus.

    Science.gov (United States)

    Li, Zhong-Yi; Li, Jiu-Yu; Liu, Yuan; Xu, Ren-Kou

    2014-09-01

    The streaming potential has been wildly used in charged parallel plates, capillaries, and porous media. However, there have been few studies involving the ζ potential of clay soils based on streaming potential measurements. A laboratory apparatus was developed in this study to measure the streaming potential (ΔE) of bulk clay soils' coupling coefficient (C) and cell resistance (R) of saturated granular soil samples. Excellent linearity of ΔE versus liquid pressure (ΔP) ensured the validity of measurements. The obtained parameters of C and R can be used to calculate the ζ potential of bulk soils. The results indicated that the ζ potentials measured by streaming potential method were significantly correlated with the ζ potentials of soil colloids determined by electrophoresis (r (2) = 0.960**). Therefore, the streaming potential method can be used to study the ζ potentials of bulk clay soils. The absolute values of the ζ potentials of four soils followed the order: Ultisol from Jiangxi > Ultisol from Anhui > Oxisol from Guangdong > Oxisol from Hainan, and this was consistent with the cation exchange capacities of these soils. The type and concentration of electrolytes affected soil ζ potentials. The ζ potential became less negative with increased electrolyte concentration. The ζ potentials were more negative in monovalent than in divalent cationic electrolyte solutions because more divalent cations were distributed in the shear plane of the diffuse layer as counter-cations on the soil surfaces than monovalent cations at the same electrolyte concentration.

  13. Interactions of Cations with Electrodialyzed Clay Fraction of Soils as Inferred from Wien Effect in Soil Suspensions

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The electrical conductivities (ECs) of suspensions containing 25 and 30 g kg-1 solids prepared from theelectrodialyzed clay fraction (< 2 μm in diameter) of latosol, yellow-brown soil, and black soil, dispersed invarious nitrate solutions having concentrations of 1 × 10-4/z mol L-1, where z is the valence, and in distilledwater, were measured at field strengths ranging from 14 kV cm-1 to 210 kV cm-1. On the basis of analysesof the charge density and exchangeable ion composition on the surfaces of soil particles in the suspensions,and of the characters of the EC-field strength curves of the various suspensions, it was inferred that theincrement of EC (△EC) and/or relative electrical conductivity (REC) can indicate the bonding strengthbetween cations and soil particles. The bonding strengths of various cations with the soils diminished in theorder: K+ > Zn2+ > Mg2+ = Ca2+ > Na+ for latosol, Ca2+ > Zn2+ > Mg2+ = K+ > Na+ for yellow-brownsoil, and Zn2+ >Ca2+ > Mg2+ > K+ > Na+ for black soil.

  14. Water and Heavy Metal Transport in Roadside Soils

    Institute of Scientific and Technical Information of China (English)

    B. KOCHER; G. WESSOLEK; H. STOFFREGEN

    2005-01-01

    Roads with very high traffic loads in regions where soils are low in both pH and sorption capacity might be a source of percolation water loaded with heavy metals. Looking at some "worst case" scenarios, this study focused on the input of traffic related pollutants and on Pb, Cd, Cu, Zn, Ni and Cr concentrations in the soil matrix and soil solution, respectively.The analysis also included pH and electrical conductivity and at some sites DOC. The investigations were carried out on sandy soils with more or less low pH values at four motorway sites in Germany. The average of daily traffic was about 50 000 up to 90 000 vehicles. Soil pore water was collected in two soil depths and at four distances from the road. The pH in general decreased with increasing distance from the roadside. The elevated pH near the roadside was presumably caused by deposition of dust and weathering residues of the road asphalt, as well as by infiltration of salt that was used during winter time. At these road sites, increased heavy metal concentrations in the soil matrix as well as in the soil solution were found. However, the concentrations seldom exceeded reference values of the German Soil Protection Act. The soil solution concentrations tended to increase from the road edge to 10 m distance, whereas the concentration in the soil matrix decreased. Elevated DOC concentrations corresponded with elevated Cu concentrations but did not substantially change this tendency. High soil water percolation rates were found near the roads. Thus, even low metal concentrations of percolation water could yield high metal loads in a narrow area beside the road.

  15. Geotechnical characterization of mined clay from Appalachian Ohio: challenges and implications for the clay mining industry.

    Science.gov (United States)

    Moran, Anthony R; Hettiarachchi, Hiroshan

    2011-07-01

    Clayey soil found in coal mines in Appalachian Ohio is often sold to landfills for constructing Recompacted Soil Liners (RSL) in landfills. Since clayey soils possess low hydraulic conductivity, the suitability of mined clay for RSL in Ohio is first assessed by determining its clay content. When soil samples are tested in a laboratory, the same engineering properties are typically expected for the soils originated from the same source, provided that the testing techniques applied are standard, but mined clay from Appalachian Ohio has shown drastic differences in particle size distribution depending on the sampling and/or laboratory processing methods. Sometimes more than a 10 percent decrease in the clay content is observed in the samples collected at the stockpiles, compared to those collected through reverse circulation drilling. This discrepancy poses a challenge to geotechnical engineers who work on the prequalification process of RSL material as it can result in misleading estimates of the hydraulic conductivity of the samples. This paper describes a laboratory investigation conducted on mined clay from Appalachian Ohio to determine how and why the standard sampling and/or processing methods can affect the grain-size distributions. The variation in the clay content was determined to be due to heavy concentrations of shale fragments in the clayey soils. It was also concluded that, in order to obtain reliable grain size distributions from the samples collected at a stockpile of mined clay, the material needs to be processed using a soil grinder. Otherwise, the samples should be collected through drilling.

  16. Influence of tebuconazole and copper hydroxide on phosphatase and urease activities in red sandy loam and black clay soils

    OpenAIRE

    B. Anuradha; Rekhapadmini, A.; Rangaswamy, V.

    2016-01-01

    The efficacy of two selected fungicides i.e., tebuconazole and coppoer hydroxide, was conducted experiments in laboratory and copper hydroxide on the two specific enzymes phosphatase and urease were determined in two different soil samples (red sandy loam and black clay soils) of groundnut (Arachis hypogaea L.) from cultivated fields of Anantapuramu District, Andhra Pradesh. The activities of the selected soil enzymes were determined by incubating the selected fungicides-treated (1.0, 2.5, 5....

  17. Assessment of Heavy Metal Contamination in Soils around Cassava ...

    African Journals Online (AJOL)

    treatment. Apart from the fact that cassava effluents contain high cyanide content which has adverse ... cottage industries such as cassava processing in ...... European. Soil Bureau Research Report No. 4. Office of. Official Publication of the ... irrigation using waste water on heavy metal ... Biological Sciences 7(2): 405-408.

  18. Clay and Soil Photolysis of the Pesticides Mesotrione and Metsulfuron Methyl

    Directory of Open Access Journals (Sweden)

    Marie Siampiringue

    2014-01-01

    Full Text Available Photolysis may represent an important degradation process of pollutants at the surface of soil. In the present work, we report a detailed study on the degradation of two pesticides: mesotrione and metsulfuron methyl using a sunlight simulator. In a first step, we studied the photochemical behaviour at the surface of clays from the kinetic as well as from the analytical point of view. In both cases, the quantum yields were found to be higher when compared to those obtained in aqueous solutions. The effect of iron(III, water, and humic substances contents was studied. In the former cases, an increase of the degradation rate was observed while an inhibition was observed with the latter owing to a filter effect phenomenon. In a second step, we studied the photodegradation at the surface of natural soil and identified the generated byproducts. They appear to mainly arise from photohydrolysis process.

  19. Microorganism-induced weathering of clay minerals in a hydromorphic soil

    Science.gov (United States)

    Hong, Hanlie; Fang, Qian; Cheng, Liuling; Wang, Chaowen; Churchman, Gordon Jock

    2016-07-01

    In order to improve the understanding of factors influencing weathering in hydromorphic soils, the clay mineral and chemical compositions, iron (hydr)oxides, organic compounds, and Sr and Nd isotopic compositions, of hydromorphic soils on the banks of the Liangzi Lake, Hubei province, south China, were investigated. The B horizon in the lower profile exhibits a distinct net-like pattern, with abundant short white veins within the red-brown matrix. Their various 87Sr/86Sr and 143Nd/144Nd isotopic compositions showed only small variations of 0.7270-0.7235 and 0.51200-0.51204, respectively, consistent with the composition of Yangtze River sediments, indicating that the soils were all derived from alluvium from the catchment. The white veins contained notably more SiO2, Al2O3, TiO2, and mobile elements relative to the red-brown matrix, while they both showed similar values for the chemical index of alteration of 86.7 and 87.1, respectively, and displayed similar degrees of weathering. The clay minerals in A, AE, and E horizons of the soil profile were illite, kaolinite, and mixed-layer illite-smectite. These same three clay minerals comprised the white net-like veins in the soil B horizon, whereas only illite and kaolinite were observed in the red-brown matrix. Iron (hydr)oxides in A, AE, and E horizons of the soil profile were hematite and goethite, whereas in the red-brown matrix of the B horizon they were hematite, goethite, and ferrihydrite. Different organic compounds were observed for the white vein and the red-brown matrix in the soil B horizon: an 18:2 fatty acid biomarker for fungi in the net-like vein, but not in the red-brown matrix. Compared with the red-brown matrix, the white net-like vein also clearly contained more mono-unsaturated fatty acids, which are sometimes associated with bacteria that have the capacity to reduce Fe(III). Thus, migration of iron and the formation of the net-like veins involved the participation of biota during the hydromorphic

  20. Influence of insecticides flubendiamide and spinosad on biological activities in tropical black and red clay soils.

    Science.gov (United States)

    Mohiddin, G Jaffer; Srinivasulu, M; Subramanyam, K; Madakka, M; Meghana, D; Rangaswamy, V

    2015-02-01

    A laboratory experiment has been conducted to investigate the ecological toxicity of flubendiamide and spinosad at their recommended field rates and higher rates (1.0, 2.5, 5.0, 7.5, 10.0 kg ha(-1)) on cellulase, invertase and amylase in black and red clay soils after 10, 20, 30 and 40-day exposure under controlled conditions in groundnut (Arachis hypogaea L.) soils of Anantapur District, Andhra Pradesh, India. Flubendiamide and spinosad were stimulatory to the activities of cellulase, invertase and amylase at lower concentrations at 10-day interval. The striking stimulation in soil enzyme activities noticed at 2.5 kg ha(-1), persists for 20 days in both soils. Overall, the higher concentrations (5.0-10.0 kg ha(-1)) of flubendiamide, and spinosad were toxic or innocuous to cellulase, invertase and amylase activities, respectively. The results of the present study thus, clearly, indicate that application of the insecticides in cultivation of groundnut, at field application rates improved the activities of cellulase, invertase and amylase in soils.

  1. Influence of Hillside Gradient on Forest Road Cross Section Components in a Loamy Clay Soil

    Directory of Open Access Journals (Sweden)

    Aidin Parsakhoo

    2009-01-01

    Full Text Available Problem statement: In this study to evaluate the effects of hillside gradient on forest road cross section components in a loamy clay soil the amount of cut and fill slopes gradient and length, road bed and earthwork width were taken on tangent sections in a lat talar forest roads of Iran. Approach: The objective of this study were: (i to evaluate the direct effects of hillside gradient on cross section components such as cut and fill slopes, road bed and earthwork width in a loamy clay soil, (ii to use the model to predict the effect of hillside gradient on cross section components. Results: Results indicated that the regression analysis between hillside gradient and cut slope length had a significant linear relationship (p2 = 0.60. The equation for the calculation of earthwork width (Y from hillside gradient was Y = 4.928+0.132 X (R2 = 0.44. A significant linear relationship (p Conclusion: Through analysis of variance it was also found that the hillside gradient had a significant influence (p<0.0001 on the cross section components.

  2. Degradation of the pesticide carbofuran on clay and soil surfaces upon sunlight exposure.

    Science.gov (United States)

    Mountacer, H; Atifi, A; Wong-Wah-Chung, P; Sarakha, M

    2014-03-01

    In the present study, the photolysis of carbofuran has been undertaken under sunlight conditions and at the surface of model supports such as clay films and different soils collected from two different sites in Morocco (Tirs and Dahs). In all conditions, an efficient degradation occurred owing to direct light absorption and also to photoinduced processes involving either clays or natural organic matter moities. On kaolin films, the photodegradation kinetics appears to follow a first-order process that clearly depends on the film thickness. The diffusion of carbofuran from the lower part to the illuminated surface was found to be negligible when compared to the photolysis process within the range of 20-70 μm. Thus, the photolysis rate constant at the surface of the solid support, k (0), was evaluated to be 7.0 × 10(-3) min(-1). Under these experimental conditions, the quantum yield was found equal to 2.1 × 10(-4). On soil surfaces, the disappearance rate constant was mainly attributed to photoinduced processes arising from natural organic matter. From the analytical point of view, the products were formed through (1) hydroxylation on the aromatic ring, (2) homolytic scission of the carbamate C-O bond leading to radical species formation, and (3) photohydrolysis of the carbamate C-O bond.

  3. Interactions between extracellular polymeric substances and clay minerals affect soil aggregation

    Science.gov (United States)

    Vogel, Cordula; Rehschuh, Stephanie; Kemi Olagoke, Folasade; Redmile Gordon, Marc; Kalbiltz, Karsten

    2017-04-01

    Soil aggregation is crucial for carbon (C) sequestration and microbial processes have been recognised as important control of aggregate turnover (formation, stability, and destruction). However, how microorganisms contribute to these processes is still a matter of debate. An enthralling mechanism determining aggregate turnover and therefore C sequestration may be the excretion of extracellular polymeric substances (EPS) as microbial glue, but effects of EPS on aggregation is largely unknown. Moreover, interdependencies between important aggregation factors like the amount of fine-sized particles (clay content), the decomposability of organic matter and the microbial community (size and composition, as well as the excretion of EPS) are still poorly understood. Therefore, we studied the complex interactions between these factors and their role in aggregate turnover. It was hypothesized that an increase in microbial activity, induced by the input of organic substrates, will stimulate EPS production and therefore the formation and stability of aggregates. To test this hypothesis, an incubation experiment has been conducted across a gradient of clay content (montmorillonite) and substrate decomposability (starch and glucose) as main drivers of the microbial activity. A combination of aggregate separation and stability tests were applied. This results will be examined with respect to the obtained microbial parameters (amount and composition of EPS, CO2 emission, microbial biomass, phospholipid fatty acid), to disentangle the mechanisms and factors controlling aggregate turnover affected by soil microorganisms. This study is expected to provide insights on the role of EPS in the stability of aggregates. Thus, the results of this study will provide an improved understanding of the underlying processes of aggregate turnover in soils, which is necessary to implement strategies for enhanced C sequestration in agricultural soils.

  4. Field experiments of Controlled Drainage of agricultural clay soils show positive effects on water quantity (retention, runoff) and water quality (nitrate leaching).

    Science.gov (United States)

    schipper, peter; stuyt, lodewijk; straat, van der, andre; schans, van der, martin

    2014-05-01

    Despite best management practices, agriculture is still facing major challenges to reduce nutrients leaching to the aquatic environment. In deltas, most of total nutrient losses from artificially drained agricultural soils are discharged via drains. Controlled drainage is a promising measure to prevent drainage of valuable nutrients, improve water quality and agricultural yield and adapt to climate change (reduce peak runoff, manage water scarcity and drought). In The Netherlands, this technique has attracted much attention by water managers and farmers alike, yet field studies to determine the expected (positive) effects for Dutch conditions were scarce. Recently, a field experiment was set up on clay soils. Research questions were: how does controlled, subsurface drainage perform on clay soils? Will deeper tile drains function just as well? What are the effects on drain water quality (especially with respect to nitrogen and salt) and crop yield? An agricultural field on clay soils was used to test different tile drainage configurations. Four types of tile drainage systems were installed, all in duplicate: eight plots in total. Each plot has its own outlet to a control box, where equipment was installed to control drain discharge and to measure the flow, concentrations of macro-ions, pH, nitrogen, N-isotopes and heavy metals. In each plot, groundwater observation wells and suction cups are installed in the saturated and vadose zones, at different depths, and crop yield is determined. Four plots discharge into a hydrologic isolated ditch, enabling the determination of water- and nutrient balances. Automatic drain water samplers and innovative nitrate sensors were installed in four plots. These enable identification and unravelling so-called first flush effects (changes in concentrations after a storm event). Water-, chloride- and nitrogen balances have been set up, and the interaction between groundwater and surface water has been quantified. The hydrological

  5. Fire Events and Soil Thermometry: The Applications of Clay Chemistry for Tracing Temperature Changes in Soils and Sediments Below Surface Fires

    Science.gov (United States)

    Watson, E.; Werts, S. P.; Gelabert, M.

    2016-12-01

    Fires in the natural environment affect the physical, chemical, and biological properties of soils. However, fires may also alter the mineralogy of the geologic material in which it comes in contact. Previous experiments on high temperature alteration of clays indicate that dehydration, oxidation, and hydroxylation in clay minerals can occur progressively in that order at increasing temperatures up to 500°C. It is also well known that wildfire events can heat soils to these temperature ranges several centimeters deep. In this experiment, alterations in clay chemistry were used as a tool to investigate fire intensity along with the changing morphology of clay minerals. For data collection, small camp fires were set in York County, SC and temperatures were recorded using a datalogger system to 5 cm deep during the fire event. Control samples were taken adjacent to the fires to compare the changing morphology of the minerals when heated. Powder x-ray diffraction and scanning electron microscopy were used to identify the clay mineralogy. The clay from soil samples was identified as hydrous kaolinite, anhydrous kaolinite, and varying types of goethite. To observe the dehydration, oxidation, and hydroxylation of clay minerals, scanning electron microscopy with emission dispersive spectroscopy was used to identify the O/cation ratios present, which would indicate changes in the oxidation state of the clay minerals. By mapping the changes in O/cation ratios with temperature in silicates, we are able to trace the temperature of the sediments during fire events. This research suggests it may be possible to utilize these geochemical trends to aid in soil and sediment temperature investigations in both archeological and modern soil and surface process investigations.

  6. Critical loads of heavy metals for soils

    NARCIS (Netherlands)

    Vries, de W.; Groenenberg, J.E.; Lofts, S.; Tipping, E.; Posch, M.

    2012-01-01

    To enable a precautionary risk assessment for future inputs of metals, steady-state methods have been developed to assess critical loads of metals avoiding long-term risks to food quality and eco-toxicological effects on organisms in soils and surface waters. A critical load for metals equals the lo

  7. Environmental impact of heavy metal pollution in natural aquatic systems

    OpenAIRE

    Tayab, Muhammad Rehan

    1991-01-01

    This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University. The distribution of heavy metals between soil and soil solutions is a key issue in evaluating the environmental impact of long term applications of heavy metals to land. Contamination of soils by heavy metals has been reported by many workers. Metal adsorption is affected by many factors, including soil pH, clay mineralogy, abundance of oxides and organic matter, soil composition and solution...

  8. Nematodes as bioindicators of soil degradation due to heavy metals.

    Science.gov (United States)

    Šalamún, Peter; Renčo, Marek; Kucanová, Eva; Brázová, Tímea; Papajová, Ingrid; Miklisová, Dana; Hanzelová, Vladimíra

    2012-11-01

    The effect of distance from a heavy metal pollution source on the soil nematode community was investigated on four sampling sites along an 4 km transect originating at the Kovohuty a.s. Krompachy (pollution source). The soil nematode communities were exposed to heavy metal influence directly and through soil properties changes. We quantified the relative effects of total and mobile fraction of metals (As, Cd, Cr, Cu, Pb, and Zn) on soil ecosystem using the nematode community structure (trophic and c-p groups,) and ecological indices (Richness of genera, H', MI2-5, etc.). Pollution effects on the community structure of soil free living nematodes was found to be the highest near the pollution source, with relatively low population density and domination of insensitive taxa. A decrease in heavy metals contents along the transect was linked with an increase in complexity of nematode community. The majority of used indices (MI2-5, SI, H') negatively correlated (P bioindication of contamination and could be used as an alternative to the common approaches based on chemical methods.

  9. HEAVY METAL CONCENTRATION OF SOIL IN THE REGIONAL CITY PLAYGROUNDS

    Science.gov (United States)

    Nakagawa, Kei; Tsuzuki, Megumi; Asakura, Hiroshi

    It seems important to examine heavy metal concentration in playgrounds, to evaluate potential risk for heavy metal ingestion by children. In this study, heavy metal concentrations of soil samples in 40 playgrounds in K-city were investigated by the voltammetric method. To visualize heavy metal concentration distribution in playgrounds, free GIS software MANDARA was used. According to the comparison between the 1 N HCl dissolved concentration and the PTWI (Provisional Tolerable Weekly Intake), playgrounds in K-city may not have intake risk of lead. Even if the possibility of the risk was very low, there are differences of the intensities. As for the specific playground where concentration is high, investigating continuously may be desirable hereafter.

  10. Phytoremediation of heavy metal contaminated soil by Jatropha curcas.

    Science.gov (United States)

    Chang, Fang-Chih; Ko, Chun-Han; Tsai, Ming-Jer; Wang, Ya-Nang; Chung, Chin-Yi

    2014-12-01

    This study employed Jatropha curcas (bioenergy crop plant) to assist in the removal of heavy metals from contaminated field soils. Analyses were conducted on the concentrations of the individual metals in the soil and in the plants, and their differences over the growth periods of the plants were determined. The calculation of plant biomass after 2 years yielded the total amount of each metal that was removed from the soil. In terms of the absorption of heavy metal contaminants by the roots and their transfer to aerial plant parts, Cd, Ni, and Zn exhibited the greatest ease of absorption, whereas Cu, Cr, and Pb interacted strongly with the root cells and remained in the roots of the plants. J. curcas showed the best absorption capability for Cd, Cr, Ni, and Zn. This study pioneered the concept of combining both bioremediation and afforestation by J. curcas, demonstrated at a field scale.

  11. Leaching of trifluralin, metolachlor, and metribuzin in a clay loam soil of Louisiana.

    Science.gov (United States)

    Kim, Jung-Ho; Feagley, Sam E

    2002-09-01

    Trifluralin[2,6-dinitro-N,N-dipropyl-4-(trifluormethyl)benzenamine], metolachlor[2-chloro-N-(2-ethyl-6-methylphenyl)-N-(2-methoxy-1-methylethyl)acetamide], and metribuzin[4-amino-6-(1,1-dimethylethyl)-3-(methylthio)-1,2,4-triazin-5(4H)one] were applied in field plots located on a Commerce clay loam soil near Baton Rouge, Louisiana at the rate of 1683 g/ha, 2759 g/ha and 609 g/ha, respectively. The half-lives of trifluralin, metolachlor, and metribuzin in the top 0-15 cm soil depth were found to be 54.7 days, 35.8 days and 29.8 days, respectively. The proportion of trifluralin, metolachlor, and metribuzin in the top 0-15 cm soil depth was 94.7%, 86.6%, and 75.4%, respectively of that found in the top 0-60 cm soil depth 30 days after application. Trifluralin concentrations were within a range of 0.026 ng/mL to 0.058 ng/mL in 1 m deep well water, and between 0.007 ng/mL and 0.039 ng/mL in 2 m deep well water over a 62 day period after application. Metolachlor concentrations in the 1 m and 2 m wells ranged from 3.62 ng/mL to 82.32 ng/mL and 8.44 ng/mL to 15.53 ng/mL, respectively. Whereas metribuzin concentrations in the 1 m and 2 m wells ranged from 0.70 ng/mL to 27.75 ng/mL and 1.71 ng/mL to 3.83 ng/mL, respectively. Accordingly, trifluralin was found to be strongly adsorbed on the soil and showed negligible leaching. Although metolachlor and metribuzin were also both readily adsorbed on the soil, their leaching potential was high. As a result, in the clay loam soil studied, metribuzin concentration in groundwater with shallow aquifers is likely to exceed the 10 mg/L US Environmental Protection Agency (EPA) advisory level for drinking water early in the application season, whereas trifluralin and metolachlor concentrations are expected to remain substantially lower than their respective 2 ng/mL and 175 ng/mL EPA advisory levels.

  12. Humus-assisted cleaning of heavy metal contaminated soils

    Science.gov (United States)

    Borggaard, Ole K.; Rasmussen, Signe B.

    2016-04-01

    Contamination of soils with non-degradable heavy metals (HMs) because of human acticities is globally a serious problem threatening human health and ecosystem functioning. To avoid negative effects, HMs must be removed either on-site by plant uptake (phytoremediation) or off-site by extraction (soil washing). In both strategies, HM solubility must be augmented by means of a strong ligand (complexant). Often polycarboxylates such as EDTA and NTA are used but these ligands are toxic, synthetic (non-natural) and may promote HM leaching. Instead naturally occurring soluble humic substances (HS) were tested as means for cleaning HM contaminated soils; HS samples from beech and spruce litter, compost percolate and processed cow slurry were tested. Various long-term HM contaminated soils were extracted with solutions of EDTA, NTA or HS at different pH by single-step and multiple-step extraction mode. The results showed that each of the three complexant types increased HM solubility but the pH-dependent HM extraction efficiency decreased in the order: EDTA ≈ NTA > HS. However, the naturally occurring HS seems suitable for cleaning As, Cd, Cu and Zn contaminated soils both in relation to phytoremediation of moderately contaminated soils and washing of strongly contaminated soils. On the other hand, HS was found unsuited as cleaning agent for Pb polluted calcareous soils. If future field experiments confirm these laboratory results, we have a new cheap and environmentally friendly method for solving a great pollution problem, i.e. cleaning of heavy metal contaminated soils. In addition, humic substances possess additional benefits such as improving soil structure and stimulating microbial activity.

  13. Comparing predictive abilities of three visible-near infrared spectrophotometers for soil organic carbon and clay determination

    DEFF Research Database (Denmark)

    Knadel, Maria; Stenberg, Bo; Deng, Fan;

    2013-01-01

    -NIRS sensors for soil characterization. There is a need for more work on the effects of scanning strategies, and use of different soil instrumentation. We compared three vis-NIR sensors with varying resolution, signal-to-noise ratios and spectral range. Their performance was evaluated based on soil organic...... carbon (SOC) and clay calibrations for 194 Danish top soils. Scanning procedures for the three spectrophotometers where done according to uniform laboratory protocols. SOC and clay calibrations were performed using PLS regression. One third of the data was used as an independent test set. A range......Due to advances in optical technology a wide range of spectrometers is available. Recent interests in soil global libraries and sensor fusion presents a challenge with respect to combining data from different instrumentation. Only little research, however, has been done on the comparison of vis...

  14. Soil contamination by heavy metals in landfills: measurements from an unlined leachate storage basin.

    Science.gov (United States)

    Bouzayani, Fethi; Aydi, Abdelwaheb; Abichou, Tarek

    2014-08-01

    Landfills are sources of groundwater and soil pollution due to the production of leachate and its migration through refuse. This study was conducted in order to determine the extent of soil pollution within and around the Jebel Chakir landfill, located in the Tunis City, Tunisia. The main objective was to characterize soil samples of an unlined storage basin in relation to heavy metal concentrations in the Jebel Chakir landfill to the southwest of Tunis, Northern Tunisia. Twenty-four soil samples taken from different locations around the storage basin were analyzed by atomic absorption spectrophotometry for Cr, Cu, Ni, Pb, and Zn investigation. Our results indicated high concentrations of Cr (54.4-129.9 mg/kg of DM), Zn (4.1-81.8 mg/kg of DM), Ni (15.1-43.9 mg/kg of DM), Pb (5.6-16.1 mg/kg of DM), and Cu (0.2-1.84 mg/kg of DM). These results suggested that contaminant migration is controlled by an active clay layer acting as an insulating material in the landfill. It is therefore necessary to set a treatment system for the landfill leachates and place a liner under the storage basin to reduce the pollution threat.

  15. Heavy Metal Bioavailability and Bioaccessibility in Soil

    Science.gov (United States)

    Dean, John Richard

    This chapter considers the use of a variety of approaches to assess either the bioavailability or the bioaccessibility of metals in soil. The bioavailability of metals from soils is considered with respect to a series of single-extraction methods, including the use of ethylenediaminetetraacetic acid (EDTA), acetic acid, diethylenetriaminepentaacetic acid (DTPA), ammonium nitrate, calcium chloride and sodium nitrate. Then, a procedure for the recovery of metals using a three-stage sequential extraction protocol is described. Two alternate approaches for assessing the environmental health risk to humans by undertaking in vitro gastrointestinal extraction (also known as the physiologically based extraction test, PBET) are considered. Finally, two acid digestion protocols that allow the pseudo-total metal content of samples to be assessed are provided.

  16. The association of soil organic matter with mineral surfaces depends on clay content in an arable Cambisol

    Science.gov (United States)

    Schweizer, Steffen A.; Angelika, Koelbl; Hoeschen, Carmen; Mueller, Carsten W.; Koegel-Knabner, Ingrid

    2017-04-01

    The amount and distribution of mineral-associated soil organic matter (MOM) depends on the availability of adsorptive mineral surface area. In soils with low content of fine-sized mineral particles, the available mineral surface is limited in comparison to soils with high content of fine-sized mineral particles. Accordingly, the spatial distribution of MOM from soils with various contents of fine-sized mineral particles should reflect different structural organization of organo-mineral associations. In this study, we analyzed MOM and further indicators of its binding in the topsoil (020 cm) of an arable Cambisol. The sampled site showed a gradient in the content of clay-sized particles (6-35 %) under similar soil management and biomass input. We obtained fine silt-sized (26.3 μm) and clay-sized (0.22 μm) mineral-associated (>1.6 g cm3) fractions from a combined density and size fractionation. We measured solid-state 13C nuclear magnetic resonance spectra and analyzed the specific surface area of the fractions by N2-BET with and without NaOCl oxidation. The spatial distribution of MOM was determined by nanoscale secondary ion mass spectrometry (NanoSIMS) at a lateral resolution of approximately 100 nm. We found that the mineral-associated carbon concentration of the fine silt and clay-sized fractions decreased from 80 to 40 mg g-1 when the content of clay-sized particles increased from 6 to 15 %. In the clay-rich soils the mineral-associated carbon remained constant at approximately 40 mg g-1 for higher contents of clay-sized particles from 15 to 30 %. In addition, the 12C and 12C14N ion distributions obtained from NanoSIMS indicated a much higher coverage of mineral surface with MOM in the sandy soils than in the clay-rich soils. Our data shows that both the concentration and coverage of MOM is increased in soils with a lower content of fine-sized mineral particles, when the input of organic material to the soil is similar.

  17. Accumulation of Heavy Metals in Vegetables from Agricultural Soils

    Directory of Open Access Journals (Sweden)

    ELJAN KASA

    2015-06-01

    Full Text Available This study analyzed the heavy metals in vegetables cultivated in private gardens in Bregu i Matit, an important agricultural area in the NW Albania.The plant and soil samples taken from irrigated and non-irrigated fields in this area were analyzed for the concentrations of Cd, Cu, Zn, Pb and Ni using atomic absorption spectroscopy (AAS, after extraction by HNO3 and H2O2.The transfer factors (TF were used to evaluate the risk of metal transfer from soil to plant and the FAO/WHO safe limits to assess the potential hazards of heavy metals to human health. The ranges of heavy metal concentrations ± standard deviation in vegetable samples were (mg kg- 1: Cu 2.98-12.90 (±3.08, Ni 4.82-35.79 (±7.68, Zn Zn > Cu > Ni > Pb. The TF values indicate that only Cd was accumulated in plants.The contents of Cd in three vegetable samples, Pb in four samples, and Cu in one sample were above the safe limits set by the FAO/WHO for heavy metals in foods and vegetables indicating that consumption of vegetables grown in the studied soils could be dangerous to human health.

  18. Effect of soil properties, heavy metals and emerging contaminants in the soil nematodes diversity.

    Science.gov (United States)

    Gutiérrez, Carmen; Fernández, Carlos; Escuer, Miguel; Campos-Herrera, Raquel; Beltrán Rodríguez, M Eulalia; Carbonell, Gregoria; Rodríguez Martín, Jose Antonio

    2016-06-01

    Among soil organisms, nematodes are seen as the most promising candidates for bioindications of soil health. We hypothesized that the soil nematode community structure would differ in three land use areas (agricultural, forest and industrial soils), be modulated by soil parameters (N, P, K, pH, SOM, CaCO3, granulometric fraction, etc.), and strongly affected by high levels of heavy metals (Cd, Pb, Zn, Cr, Ni, Cu, and Hg) and emerging contaminants (pharmaceuticals and personal care products, PPCPs). Although these pollutants did not significantly affect the total number of free-living nematodes, diversity and structure community indices vastly altered. Our data showed that whereas nematodes with r-strategy were tolerant, genera with k-strategy were negatively affected by the selected pollutants. These effects diminished in soils with high levels of heavy metals given their adaptation to the historical pollution in this area, but not to emerging pollutants like PPCPs.

  19. Interface Shear Strength of Geosynthetic Clay Liner (GCL and Residual Soil

    Directory of Open Access Journals (Sweden)

    Mohd Izzuddin Zaini

    2012-01-01

    Full Text Available In this study, direct shear box with dimension of 100 mm x 100 mm was used to determine interface shear strength of a GCL and compacted residual soil at optimum moisture content. The tests were carried out using dry GCL sample at shearing rate of 0.5 mm/min. Normal stresses used were between 100 kPa to 300 kPa to represent the depth of 20 meters of solid waste (15 kN/m3. The needle-punched GCL was tested for both sides, woven and non-woven. Results showed that the residual soil, classified as CL according to the Unified Soil Classification System (USCS with a hydraulic conductivity of 7.05 to 5.54 x 10-9 m/s, was suitable to be used as compacted clay liner (CCL. Test results on the interface shear strength of woven and non-woven GCL with residual soil in terms of internal friction angle were 33° and 37°, respectively.

  20. Clay Mineralogy of Soils on Quaternary Sediment in Northeast of Urmia

    Directory of Open Access Journals (Sweden)

    Parisa Farzamnia

    2017-03-01

    Full Text Available Introduction: Minerals are one of the main components of soils which play different roles in the soils. Minerals make up about 50% of the volume of most soils. They provide physical support for plants, and create the water- and air-filled pores that make plant growth possible. Mineral weathering releases plant nutrients which are retained by other minerals through adsorption, cation exchange, and precipitation. Minerals are indicators of the amount of weathering that has taken place, and the presence or absence of particular minerals gives clues to how soils have been formed. The physical and chemical characteristics of soil minerals are important consideration in planning, constructing, and maintaining of buildings, roads, and airports. Clay minerals can be used for understanding of soil formation, optimum management of dry and wet lands and interpretation of paleo environments. Moreover, clay minerals can provide some valuable information such as the origin of sediments, transportation and precipitation of sediments and also some information about intercontinental weathering regimes. Quaternary sediments have occupied most of the agricultural and natural resources of Urima plain and recognition of mineralogical of these soils is essential to optimum and stabile use of these soils. Additionally, caly mineralogical investigation can provide some information about the intensity of weathering processes and climate change in this area. Thus, in this study clay minerals of quaternary sediments in northeast of Urmia and the mechanisms of their formation and also tracing probable climate change in this area were investigated. Materials and Methods: This study was performed in theUrmia plain in west Azerbaijan Province. The study area is located on quaternary sediments and physiographically, this area is a part of a river alluvial plain with the gentle slope toward Urmia Lake. The mean annual precipitation and temperature of this area are 345.37 mm and

  1. An Assessment Of Physicochemical Properties, Heavy Metal Enrichment And Fungal Characterization Of Refined Kerosene Impacted Soil In Anand, Gujarat, India

    Directory of Open Access Journals (Sweden)

    Shamiyan R Khan

    2013-12-01

    Full Text Available The present study was carried out to assess the physico-chemical properties, heavy metal enrichment and fungal isolation and characterization of the top soil samples collected in-situ from aged refined kerosene contaminated as well as uncontaminated garden soil sites in Anand, Gujarat, India. The total petroleum hydrocarbon (TPH concentrations were 17,510 mg/kg in kerosene contaminated soil against 142.65 mg/kg for uncontaminated soils. The contamination increased the soil organic carbon, nitrogen and clay to 2.95 %, 0.612 %, 36.22 % as compared to 1.5%, 0.153%, 32.4% respectively in the uncontaminated soil. Increased concentration of heavy metals like Cobalt, Copper, Iron, Zinc and Lead against the uncontaminated soil was encountered. Ten native fungal speciesbelonging to a total of five genera include Aspergillus (A. terreus, A. versicolor, A. niger; Fusarium oxysporum; Penicilliumjanthinellum from the uncontaminated garden soil, whereas the contaminated soil included Aspergillus (A. terreus, A. versicolor , A. niger Candida tropicalis,Cladosporiumbruhnei and Fusarium oxysporum, identified based on 18S rRNA and the nucleotide sequences were submitted to the NCBI, GenBank database. The changes created by kerosene contamination resulted in variation in individual concentrations of physicochemical properties, soil conductivity, pH and soil fertility indices probably dwindle the growth of fungal strains causing a reduction in the fungal population in the kerosene contaminated soil. International Journal of Environment, Volume-2, Issue-1, Sep-Nov 2013, Pages 164-174 DOI: http://dx.doi.org/10.3126/ije.v2i1.9219

  2. Heavy Metal Contamination of Soil Due to Road Traffic

    Directory of Open Access Journals (Sweden)

    A. Athanasopoulou

    2017-01-01

    Full Text Available Particles coming from the pavement’s maintenance or from the traffic on it enter the soil carried by water. More pollutants transferred by air are dispersed in different distances, also polluting the soil. Precautionary and remedial measures are suggested for urban, peri-urban, and rural zones crossed by roadways, as a function of the plants' species and the level of the road. The proposed measures are based on the soil's chemical composition and draining conditions. Iron and the non-volatile heavy metals, copper, zinc, cadmium, lead, chromium, nickel, are often found in roadside topsoil, as well as in roots and leafage of vegetables and trees. Manganese is found in combination with iron in many minerals and not as free element. The reasons and frequency of existence of metals have to be examined so as to take measures against contamination and possible health hazards. Heavy metal concentrations of soils have been seldom studied in Greece and there is a lack of data sources for the environmental impact of these elements in soil and dust from the pavements and the traffic. The impacts of road construction and service on the surrounding soil masses are studied and analyzed in view of their quality as nutrient materials

  3. [Immobilization impact of different fixatives on heavy metals contaminated soil].

    Science.gov (United States)

    Wu, Lie-shan; Zeng, Dong-mei; Mo, Xiao-rong; Lu, Hong-hong; Su, Cui-cui; Kong, De-chao

    2015-01-01

    Four kinds of amendments including humus, ammonium sulfate, lime, superphosphate and their complex combination were added to rapid immobilize the heavy metals in contaminated soils. The best material was chosen according to the heavy metals' immobilization efficiency and the Capacity Values of the fixative in stabilizing soil heavy metals. The redistributions of heavy metals were determined by the European Communities Bureau of Referent(BCR) fraction distribution experiment before and after treatment. The results were as follows: (1) In the single material treatment, lime worked best with the dosage of 2% compared to the control group. In the compound amendment treatments, 2% humus combined with 2% lime worked best, and the immobilization efficiency of Pb, Cu, Cd, Zn reached 98.49%, 99.40%, 95.86%, 99.21%, respectively. (2) The order of Capacity Values was lime > humus + lime > ammonium sulfate + lime > superphosphate > ammonium sulfate + superphosphate > humus + superphosphate > humus > superphosphate. (3) BCR sequential extraction procedure results indicated that 2% humus combined with 2% lime treatment were very effective in immobilizing heavy metals, better than 2% lime treatment alone. Besides, Cd was activated firstly by 2% humus treatment then it could be easily changed into the organic fraction and residual fraction after the subsequent addition of 2% lime.

  4. Common clay and shale

    Science.gov (United States)

    Virta, R.L.

    2011-01-01

    The article discusses the latest developments in the global common clay and shale industry, particularly in the U.S. It claims that common clay and shale is mainly used in the manufacture of heavy clay products like brick, flue tile and sewer pipe. The main producing states in the U.S. include North Carolina, New York and Oklahoma. Among the firms that manufacture clay and shale-based products are Mid America Brick & Structural Clay Products LLC and Boral USA.

  5. Light-assisted decomposition of dyes over iron-bearing soil clays in the presence of H2O2.

    Science.gov (United States)

    Wang, Zhaohui; Ma, Wanhong; Chen, Chuncheng; Zhao, Jincai

    2009-09-15

    Four types of soil clays from different sites in China have been chosen to simulate chemical remediation of soils contaminated with dyes by light-assisted Fenton-like method. X-Ray diffraction (XRD), X-ray photoelectron spectroscopic (XPS) and electron spin resonance (ESR) measurements indicated that these soil clays contain iron oxides such as magnetite and hematite, where nondistorted iron active sites (ESR spectra, g=2.3) predominate. Upon visible or UV irradiation, the soil clays were very effective for the degradation of nonbiodegradable cationic dyes such as Rhodamine B (RhB) by activating H(2)O(2) at neutral pH. The photodegradation rates of RhB were closely related to total Fe content in clays and H(2)O(2) dosage, indicating the mineral-catalyzed Fenton-like reactions operated. Soil organic matters (SOM) would remarkably inhibit the photodecomposition of RhB dye. The reaction products were some low-molecular-weight dicarboxylic acids and their derivatives, all of which are easily biodegradable. A possible mechanism was proposed based on the results obtained by spin-trapping ESR technique.

  6. Clay mineralogical evidence of a bioclimatically-affected soil, Rouge River basin, South-Central Ontario, Canada

    Science.gov (United States)

    Mahaney, W. C.

    2015-01-01

    Holocene soils in drainage basins of South-Central Ontario, Canada, are generally Fluvisols (Entisols) in floodplains transitioning to Brunisols (Inceptisols), Luvisols (Alfisols) and Podzols (Spodosols) in older terraces and in the glaciated tableland. A single landslide sourced from the highest fluvial terrace in the Rouge basin, with a rubble drop of ~ 12 m emplaced a lobe-shaped mass of reworked stream gravel, glaciolacustrine sediment and till, emplaced approximately 6 m above mean water level at a height roughly equivalent to previously dated mid-Holocene terraces and soils. Clay mineralogy of the soil formed in this transported regolith produced the usual semi-detrital/pedogenic distribution of 1:1 (Si:Al = 1:1), 2:1 and 2:1:1 clay minerals as well as primary minerals consisting of plagioclase feldspar, quartz, mica and calcite. Unexpectedly, the presence of moderate amounts of Ca-smectite in the Bk and Ck horizons, relative to a clay-mineral depleted parent material (Cuk), argues for a soil hydrological change affecting the wetting depth in the deposit. The presence of the uncommon 'maidenhair fern' (Adiantum pedantum) in the mass wasted deposit, a plant capable of high evapotranspiration, is interpreted as producing a bioclimatic disruption limiting soil water penetration to near root depth (wetting depth), thus producing a clay mineral anomaly.

  7. The role of soil's particle-size fractions in the adsorption of heavy metals

    Directory of Open Access Journals (Sweden)

    Saglara Mandzhieva

    2014-08-01

    Full Text Available The parameters of adsorption of Cu2+, Pb2+, and Zn2+ cations by southern chernozem and their particle-size fractions were studied. The adsorption of metals by soils and the strength of their fixation on the surface of soil particles under both mono- and poly-element contamination decreased with the decreasing proportion of fine fractions in the soil. The aim of this work was to study the effect of the particle-size distribution and the silt and physical clay fractions on the adsorption of copper, lead, and zinc by chernozems. The objects of study included the upper humus horizons of different southern chernozems of the Rostov oblast. To study the ion-exchange adsorption of the Cu2+, Pb2+, and Zn2+ cations, the soil in the natural ionic form was disaggregated using a pestle with a rubber head and sieved through a 1mm sieve. The soil samples were treated with solutions of Cu2+, Pb2+, and Zn2+ nitrates and acetates at the separate and simultaneous presence of heavy metals (HMs. In the solutions with the simultaneous presence of HMs, their molar concentrations were similar. The concentrations of the initial solutions varied in the range from 0.05 to 1 mM/l. The soil: solution ratio was 1:10. The contents of HMs in the filtrates were determined by atomic absorption spectrophotometry. The contents of adsorbed HM cations were calculated from the difference between the metal concentrations in the initial and equilibrium solutions. The increase in the degree of dispersion of the particle-size fractions in similar soils resulted not only in an increase in the content of adsorbed HMs but also in an enhancement of their fixation on the surface of the fine particles. Therefore, the adsorption capacity of the Lower Don soils for Cu2+, Pb2+, and Zn2+ decreased in the following sequence: clay loamy southern chernozem > loamy southern chernozem > loamy sandy southern chernozem. This was related to the qualitative differences in the mineralogy and chemistry of

  8. Surface complexation of heavy metal cations on clay edges: insights from first principles molecular dynamics simulation of Ni(II)

    Science.gov (United States)

    Zhang, Chi; Liu, Xiandong; Lu, Xiancai; He, Mengjia; Jan Meijer, Evert; Wang, Rucheng

    2017-04-01

    Aiming at an atomistic mechanism of heavy metal cation complexing on clay surfaces, we carried out systematic first principles molecular dynamics (FPMD) simulations to investigate the structures, free energies and acidity constants of Ni(II) complexes formed on edge surfaces of 2:1 phyllosilicates. Three representative complexes were studied, including monodentate complex on the tbnd SiO site, bidentate complex on the tbnd Al(OH)2 site, and tetradentate complex on the octahedral vacancy where Ni(II) fits well into the lattice. The complexes structures were characterized in detail. Computed free energy values indicate that the tetradentate complex is significantly more stable than the other two. The calculated acidity constants indicate that the tetradentate complex can get deprotonated (pKa = 8.4) at the ambient conditions whereas the other two hardly deprotonate due to extremely high pKa values. By comparing with the 2 Site Protolysis Non Electrostatic Surface Complexation and Cation Exchange (2SPNE SC/CE) model, the vacant site has been assigned to the strong site and the other two to the weak site, respectively. Thus a link has been built between atomistic simulations and macroscopic experiments and it is deduced that this should also apply to other heavy metal cations based on additional simulations of Co(II) and Cu(II) and previous simulations of Fe(II) and Cd(II)). This study forms a physical basis for understanding the transport and fixation of heavy metal elements in many geologic environments.

  9. Effects of humidity and soil organic matter on the sorption of chlorinated methanes in synthetic humic-clay complexes.

    Science.gov (United States)

    Canan Cabbar, H

    1999-09-10

    Vapor-phase sorption is the most influential process governing the transport and the fate of volatile organic compounds in soil. To understand the influence of both soil organic content and the humidity of soil on the vapor sorption is an important process for degradation processes. The single-pellet moment technique was used to investigate sorption and diffusion of trichloromethane (TCM) and carbon tetrachloride (CTC) at varying relative humidities (0-80%) of synthetic humic-clay complex pellets consisting of clay (montmorillonite) and different amounts of organic matter (humic acid). The effective diffusivities of TCM and CTC did not show a noticeable change with moisture and humic acid content. On the other hand, with increasing humic acid content of clay at 0% relative humidity, an appreciable decrease of the equilibrium sorption constants of the tracers (TCM, CTC) was found because of the blockage of some sites of the mineral surfaces and especially micropores by the humic acid. The presence of water also reduced dramatically the sorption of TCM and CTC on synthetic humic-clay complexes. Above 20% relative humidity, the sorption coefficient of TCM and CTC varied only slightly with humic acid content. It was concluded that the sorption of TCM and CTC in synthetic humic-clay complexes was strongly effected by the moisture and humic acid content.

  10. Determination of the Content of Heavy Metals in Pyrite Contaminated Soil and Plants

    Directory of Open Access Journals (Sweden)

    Miroslava Marić

    2008-09-01

    Full Text Available Determination of a pyrite contaminated soil texture, content of heavy metals in the soil and soil pH, was the aim in the investigation. Acidification of damaged soil was corrected by calcium carbonate. Mineral nutrients and organic matter (NPK, dung, earthworm cast, straw and coal dust were added to damaged soil. Afterwards, the soil was used for oat production. Determination of total heavy metal contents (Cu, Pb, Zn, Fe in soil was performed by atomic absorption spectrofotometry. Plant material (stems, seeds was analysed, too. Total concentration of the heavy metals in the plant material were greater than in crop obtained in unaffected soil.

  11. Impact of industrial effluent on growth and yield of rice (Oryza sativa L.) in silty clay loam soil.

    Science.gov (United States)

    Anwar Hossain, Mohammad; Rahman, Golum Kibria Muhammad Mustafizur; Rahman, Mohammad Mizanur; Molla, Abul Hossain; Mostafizur Rahman, Mohammad; Khabir Uddin, Mohammad

    2015-04-01

    Degradation of soil and water from discharge of untreated industrial effluent is alarming in Bangladesh. Therefore, buildup of heavy metals in soil from contaminated effluent, their entry into the food chain and effects on rice yield were quantified in a pot experiment. The treatments were comprised of 0, 25%, 50%, 75% and 100% industrial effluents applied as irrigation water. Effluents, initial soil, different parts of rice plants and post-harvest pot soil were analyzed for various elements, including heavy metals. Application of elevated levels of effluent contributed to increased heavy metals in pot soils and rice roots due to translocation effects, which were transferred to rice straw and grain. The results indicated that heavy metal toxicity may develop in soil because of contaminated effluent application. Heavy metals are not biodegradable, rather they accumulate in soils, and transfer of these metals from effluent to soil and plant cells was found to reduce the growth and development of rice plants and thereby contributed to lower yield. Moreover, a higher concentration of effluent caused heavy metal toxicity as well as reduction of growth and yield of rice, and in the long run a more aggravated situation may threaten human lives, which emphasizes the obligatory adoption of effluent treatment before its release to the environment, and regular monitoring by government agencies needs to be ensured.

  12. Impact of Long-Term Alfalfa Cropping on Soil Potassium Content and Clay Minerals in a Semi-Arid Loess Soil in China

    Institute of Scientific and Technical Information of China (English)

    LI De-Cheng; B. VELDE; LI Feng-Min; ZHANG Gan-Lin; ZHAO Ming-Song; HUANG Lai-Ming

    2011-01-01

    Alfalfa cropping has been considered an efficient method of increasing soil fertility.Usually nitrogen increase in root nodules is considered to be the major beneficial effect.A 21-year time series (five sampling periods) of alfalfa cultivation plots on a loess soil,initially containing illite and chlorite,in Lanzhou of northwestern China was selected to investigate the relationships among alfalfa cropping,soil potassium (K) content and soil clay minerals.The results indicated that soil K significantly accumulated after cropping,with a peak value at about 15 years,and decreased afterwards.The accumulated K was associated with the K increase in the well-crystallized illite,which was not extracted by the traditional laboratory K extraction methods in assessing bioavailability.The steep decline in soil K content after 15-year cropping was in accord with the observed fertility loss in the alfalfa soil.Plant biomass productivity peaked at near 9 years of culture,whereas soil K and clay minerals continued to increase until cropping for 15 years.This suggested that K increased in the topsoil came from the deep root zone.Thus alfalfa continued to store K in clays even after peak production occurred.Nitrogen did not follow these trends,showing a general decline compared with the native prairie soils that had not been cropped.Therefore,the traditional alfalfa cropping can increase K content in the topsoil.

  13. Using biochar for remediation of soils contaminated with heavy metals and organic pollutants.

    Science.gov (United States)

    Zhang, Xiaokai; Wang, Hailong; He, Lizhi; Lu, Kouping; Sarmah, Ajit; Li, Jianwu; Bolan, Nanthi S; Pei, Jianchuan; Huang, Huagang

    2013-12-01

    Soil contamination with heavy metals and organic pollutants has increasingly become a serious global environmental issue in recent years. Considerable efforts have been made to remediate contaminated soils. Biochar has a large surface area, and high capacity to adsorb heavy metals and organic pollutants. Biochar can potentially be used to reduce the bioavailability and leachability of heavy metals and organic pollutants in soils through adsorption and other physicochemical reactions. Biochar is typically an alkaline material which can increase soil pH and contribute to stabilization of heavy metals. Application of biochar for remediation of contaminated soils may provide a new solution to the soil pollution problem. This paper provides an overview on the impact of biochar on the environmental fate and mobility of heavy metals and organic pollutants in contaminated soils and its implication for remediation of contaminated soils. Further research directions are identified to ensure a safe and sustainable use of biochar as a soil amendment for remediation of contaminated soils.

  14. The influence of clay-to-carbon ratio on soil physical properties in a humid sandy loam soil with contrasting tillage and residue management

    DEFF Research Database (Denmark)

    Getahun, Gizachew Tarekegn; Munkholm, Lars Juhl; Schjønning, Per

    2016-01-01

    was sampled at the 0–10, 10–20 and 25–30 cm depths of a sandy loam soil at Flakkebjerg, Denmark in 2013. We used the experimental plots of a long-term field experiment with mouldboard ploughing (MP) and direct drilling (DD) treatments. The residue management included straw removal (−S) and straw retention (+S...... decreased clay dispersibility (p = 0.09) and increased soil friability (p b 0.05) compared with the MP soil. Direct drilling with straw removal (DD − S) resulted in higher workability compared with mouldboard ploughing with straw removal (MP − S) (p b 0.05). We defined non-complexed clay as NCC = clay −10...

  15. THE EFFECT OF P-NITROCHLOROBENZENE ON HOMEOSTASIS QUANTITATIVE PARAMETERS OF KARST CAVE CLAYS AND ECUADOR SOILS MICROBIAL COMMUNITIES.

    Science.gov (United States)

    Tashyrev, O B; Suslova, O S; Rokitko, P V

    2015-01-01

    In this paper it was given the effect of p-nitrochlorobenzene (NCB) on the homeostasis quantitative parameters of cave clays microbial communities from Western Ukraine and Abkhazia (Mushkarova Yama, Kuybushevskaya) and soils of Ecuador tropical ecosystems. For these microbial communities were determined maximum permissible concentrations and types of responses on xenobiotic. Microbial communities of Mushkarova Yama cave clays and rainforest soils of Ecuador were characterized by the first type of response. Microbial communities of Kuybushevskaya clays and mountain jungles of Ecuador were characterized by the second type of response. Maximum permissible concentration of NCB for Mushkarova Yama was 200 mg/l, for the other studied microbial communities--300 mg/l. It was shown, that microbial communities were not only highly resistant to NCB but also interacted with it by destroying this xenobiotic and decreasing its concentration in 4 times.

  16. Effects of electrokinetic treatment of a heavy metal contaminated soil on soil enzyme activities

    Energy Technology Data Exchange (ETDEWEB)

    Cang Long [State Key Laboratory of Soil and Sustainable Agriculture, Institute of Soil Science, Chinese Academy of Sciences, Nanjing 210008 (China); Graduate School of the Chinese Academy of Sciences, Beijing 100049 (China); Zhou Dongmei, E-mail: dmzhou@issas.ac.cn [State Key Laboratory of Soil and Sustainable Agriculture, Institute of Soil Science, Chinese Academy of Sciences, Nanjing 210008 (China); Wang Quanying; Wu Danya [State Key Laboratory of Soil and Sustainable Agriculture, Institute of Soil Science, Chinese Academy of Sciences, Nanjing 210008 (China); Graduate School of the Chinese Academy of Sciences, Beijing 100049 (China)

    2009-12-30

    There is a growing concern on the potential application of a direct current (DC) electric field to soil for removing contaminants, but little is known about its impact on soil enzyme activities. This study investigated the change of enzyme activities of a heavy metal contaminated soil before and after electrokinetic (EK) treatments at lab-scale and the mechanisms of EK treatment to affect soil enzyme activities were explored. After treatments with 1-3 V cm{sup -1} of voltage gradient for 420 h, soil pH, electrical conductivity (EC), soil organic carbon, dissolved organic carbon (DOC), soil heavy metal concentration and enzyme activities were analyzed. The results showed that the average removal efficiencies of soil copper were about 65% and 83% without and with pH control of catholyte, respectively, and all the removal efficiencies of cadmium were above 90%. The soil invertase and catalase activities increased and the highest invertase activity was as 170 times as the initial one. The activities of soil urease and acidic phosphatase were lower than the initial ones. Bivariate correlation analyses indicated that the soil invertase and acidic phosphatase activities were significantly correlated with soil pH, EC, and DOC at P < 0.05, but the soil urease activities had no correlation with the soil properties. On the other hand, the effects of DC electric current on solution invertase and catalase enzyme protein activities indicated that it had negative effect on solution catalase activity and little effect on solution invertase activity. From the change of invertase and catalase activities in soil and solution, the conclusion can be drawn that the dominant effect mechanism is the change of soil properties by EK treatments.

  17. Bioindication of heavy metals in soil by liverworts.

    Science.gov (United States)

    Samecka-Cymerman, A; Marczonek, A; Kempers, A J

    1997-08-01

    Studies were made of the accumulation of the heavy metals Ba, Cd, Co, Cr, Cu, Fe, Hg, Ni, Pb, Sr, V, and Zn and the macroelements N, P, K, Ca, and Mg in liverworts Conocephalum conicum, Marchantia polymorphia, and Pellia epiphylla collected from 57 microhabitats in Poland (Lower Silesia, Tatry Mts., and Puszcza Augustowska forest) and one microhabitat in the Czech Republic (Moravsky Kras). Ecological differentiation of Conocephalum conicum, Marchantia polymorpha and Pellia epiphylla populations is closely correlated with the soil chemistry. The evidence for this assumption are the significant positive correlations between concentrations of elements in soil and in the examined liverworts. In particular, correlations between contents of chromium and cobalt in soil and in Conocephalum conicum and between nickel, chromium, copper, and barium in soil and in Pellia epiphylla prove that these plants can be useful in monitoring of contamination of soil with elements mentioned above. Concentrations of cobalt in almost all the examined liverworts surpass the average background values of this element established for terrestrial bryophytes what proves that these plants tolerate increased accumulated amounts of this element and may therefore act as bioindicator for this heavy metal. Cationic equilibrium of Conocephalum conicum, Marchantia polymorpha and Pellia epiphylla examined according to Czarnowski (1977) pointed to the existence of some disturbances in ionic balance of these plants caused probably by elevated concentrations of microelements (especially iron, cobalt, lead, and copper) in their tissues.

  18. Microorganisms in heavy metal bioremediation: strategies for applying microbial-community engineering to remediate soils

    OpenAIRE

    Jennifer L. Wood; Caixian Tang; Franks, Ashley E.; Wuxing Liu

    2016-01-01

    The remediation of heavy-metal-contaminated soils is essential as heavy metals persist and do not degrade in the environment. Remediating heavy-metal-contaminated soils requires metals to be mobilized for extraction whilst, at the same time, employing strategies to avoid mobilized metals leaching into ground-water or aquatic systems. Phytoextraction is a bioremediation strategy that extracts heavy metals from soils by sequestration in plant tissues and is currently the predominant bioremediat...

  19. Streptomyces communities in soils polluted with heavy metals

    Science.gov (United States)

    Grishko, V. N.; Syshchikova, O. V.

    2009-02-01

    The contents of differently mobile heavy metal compounds and their influence on the formation of microbial cenoses (particularly, streptomyces communities) in technogenically disturbed soils are considered. Elevated concentrations of mobile Cu, Zn, Ni, Cd, and Fe compounds are shown to determine structural-functional changes in microbial cenoses that are displayed in a decreasing number of microorganisms and a narrower spectrum of the streptomyces species. Some specific features of the formation of streptomyces communities in technogenic soils were revealed on the basis of the analysis of their species structure with the use of the Margalef, Berger-Parker, and Sorensen indices of biodiversity.

  20. OPTIMIZATION OF A CALCULATION METHOD FOR PILEWORK PROTECTIVE STRUCTURES "STREAMLINED" BY LANDSLIDE CLAY SOILS

    Directory of Open Access Journals (Sweden)

    Leyer D. V.

    2016-05-01

    Full Text Available Expansion and increasing of the Krasnodar region transport infrastructure during the construction of the Olympic facilities together with the new land development created a necessity for construction in the remote areas of landslide slopes with the complex engineering-geological conditions. Constructions of bored piles, jammed by in nondisplaceable soil are often used as one of the measures for the protection of surface rocks landslide movement and tightening the slope weak sections. Such constructive solution is often being considered the best, and sometimes the only acceptable solution. When designing engineering protection it is recommended to consider the use of a number of active protection activities, aimed at the landslide processes stabilization. However, in case of construction production impossibility due to terms of organization, it is necessary to provide passive protection which would secure that the landslide streamlines the construction. Currently, the mechanism of the soil landslides interaction with constructions of detached objects spot protection isn’t studied enough. Known methods adopt simplifications and assumptions which lead to definite significant errors in the design of slope protection structures. Security and reliability of such structures can only be achieved with the adoption of high factor of safety values. This leads to increased material consumption and labor input for the erection of defensive structures also reduces the economic efficiency of these structures. In addition the process of designing protective structures in the Krasnodar region is further complicated by fact that the landslide of construction area is mainly folded by flowing clay soils

  1. Interactions of Heavy Metal Ions with Paddy Soils as Inferred from Wien Effect Measurements in Dilute Suspensions

    Institute of Scientific and Technical Information of China (English)

    JIANG Jun; LI Cheng-Bao; ZHAO An-Zhen; XU Ren-Kou; WANG Yu-Jun; S. P. FRIEDMAN

    2006-01-01

    Interactions of three heavy metal ions, Cu2+, Cd2+, and Pb2+, and, for comparison, Na+ with electrodialytic clay fractions (less than 2 pm in diameter) of four paddy soils as well as a yellow-brown soil as a control soil were evaluated based on measurements of the Wien effect in dilute suspensions with a clay concentration of 10 g kg-1 in four nitrate solutions of 2 × 10-4/z mol L-1, where z is the cation valence, and a nitric acid solution of 3 × 10-5 mol L-1. Field strengths ranging from 15 to 230 kV cm-1 were applied for measuring the electrical conductivities (ECs) of the suspensions. The mean free binding energies between the various cations and all of the soils determined from exchange equilibrium increased in the order: Na+ < Cd2+ < Cu2+ < Pb2+. In general, the ECs of the suspensions in the sodium nitrate solution were smaller than those of the suspensions in the heavy metal solutions because of the lower electrophoretic mobility of sodium compared to the divalent cations. In terms of relative electrical conductivity-field strength relationships, relative electrical conductivity (REC) of suspensions containing various cations at field strengths larger than about 50 kV cm-1 were in the descending order: Na+ > Cu2+ > Cd2+ > Pb2+ for all tested soils. A characteristic parameter of the REC-field strength curves, AREC200, REC at a field strength of 200 kV cm-1 minus that at the local minimum of the concave segment of the REC-field strength curves, characterized the strength of adsorption of the cations stripped off by the applied strong electrical field, and for all soils the values of AREC200 were generally in the order: Na+ < Cu2+ < Cd2+ < Pb2+.

  2. Distribution, fate and formation of non-extractable residues of a nonylphenol isomer in soil with special emphasis on soil derived organo-clay complexes.

    Science.gov (United States)

    Riefer, Patrick; Klausmeyer, Timm; Schäffer, Andreas; Schwarzbauer, Jan; Schmidt, Burkhard

    2011-01-01

    Anthropogenic contaminants like nonylphenols (NP) are added to soil, for instance if sewage-sludge is used as fertilizer in agriculture. A commercial mixture of NP consists of more than 20 isomers. For our study, we used one of the predominate isomers of NP mixtures, 4-(3,5-dimethylhept-3-yl)phenol, as a representative compound. The aim was to investigate the fate and distribution of the isomer within soil and soil derived organo-clay complexes. Therefore, (14)C- and (13)C-labeled NP was added to soil samples and incubated up to 180 days. Mineralization was measured and soil samples were fractionated into sand, silt and clay; the clay fraction was further separated in humic acids, fulvic acids and humin. The organo-clay complexes pre-incubated for 90 or 180 days were re-incubated with fresh soil for 180 days, to study the potential of re-mobilization of incorporated residues. The predominate incorporation sites of the nonylphenol isomer in soil were the organo-clay complexes. After 180 days of incubation, 22 % of the applied (14)C was mineralized. The bioavailable, water extractable portion was low (9 % of applied (14)C) and remained constant during the entire incubation period, which could be explained by an incorporation/release equilibrium. Separation of organo-clay complexes, after extraction with solvents to release weakly incorporated, bioaccessible portions, showed that non-extractable residues (NER) were preferentially located in the humic acid fraction, which was regarded as an effect of the chemical composition of this fraction. Generally, 27 % of applied (14)C was incorporated into organo-clay complexes as NER, whereas 9 % of applied (14)C was bioaccessible after 180 days of incubation. The re-mobilization experiments showed on the one hand, a decrease of the bioavailability of the nonylphenol residues due to stronger incorporation, when the pre-incubation period was increased from 90 to 180 days. On the other hand, a shift of these residues from the

  3. Effects of heavy metal pollution on soil microbial biomass

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    This paper reviews the effects of heavy metals on microbial biomass in metal-polluted soils. Laboratory and field investigations where metals were applied ass inorganic or organic salts demonstrated a significant decline in the size of s oil microbial biomass. In most of the cases, negative effects were evident at metal concentrations below the European Community's (EC) current permissible metal levels in the soil. Application of metal-enriched sludges and composts caused significant inhibition of microbial biomass at surprisingly modest concentrations of metals in the soil that were indeed smaller than those likely to decrease the growth of sensitive crop species. On the whole, relative toxicity of metals decreased in the order of Cd>Cu>Zn>Pb, but a few exceptions to this trend also existed. A significant decline in the biomass carbon to organic carbon ratio(Cmin/Corg) in metal-polluted soils indicated that this parameter can serve as a good indicator of the toxicity of metals on soil microflora. The knowledge regarding the response of soil biota to metal interactions and the factors affecting metal toxicity to soil microorganisms is still very limited and warrants further study.

  4. Heavy metal toxicity in rice and soybean plants cultivated in contaminated soil

    OpenAIRE

    Maria Lígia de Souza Silva; Godofredo Cesar Vitti; Anderson Ricardo Trevizam

    2014-01-01

    Heavy metals can accumulate in soil and cause phytotoxicity in plants with some specific symptoms. The present study evaluated the specific symptoms on rice and soybeans plants caused by excess of heavy metals in soil. Rice and soybean were grown in pots containing soil with different levels of heavy metals. A completely randomized design was used, with four replications, using two crop species and seven sample soils with different contamination levels. Rice and soybean exhibited different re...

  5. Extraction of heavy metals from soils using biodegradable chelating agents.

    Science.gov (United States)

    Tandy, Susan; Bossart, Karin; Mueller, Roland; Ritschel, Jens; Hauser, Lukas; Schulin, Rainer; Nowack, Bernd

    2004-02-01

    Metal pollution of soils is widespread across the globe, and the clean up of these soils is a difficulttask. One possible remediation technique is ex-situ soil washing using chelating agents. Ethylenediaminetetraacetic acid (EDTA) is a very effective chelating agent for this purpose but has the disadvantage that it is quite persistent in the environment due to its low biodegradability. The aim of our work was to investigate the biodegradable chelating agents [S,S]-ethylenediaminedisuccinic acid (EDDS), iminodisuccinic acid (IDSA), methylglycine diacetic acid (MGDA), and nitrilotriacetic acid (NTA) as potential alternatives and compare them with EDTA for effectiveness. Kinetic experiments showed for all metals and soils that 24 h was the optimum extraction time. Longer times only gave minor additional benefits for heavy metal extraction but an unwanted increase in iron mobilization. For Cu at pH 7, the order of the extraction efficiency for equimolar ratios of chelating agent to metal was EDDS > NTA> IDSA > MGDA > EDTA and for Zn it was NTA > EDDS > EDTA >MGDA > IDSA. The comparatively low efficiency of EDTA resulted from competition between the heavy metals and co-extracted Ca. For Pb the order of extraction was EDTA > NTA >EDDS due to the much stronger complexation of Pb by EDTA compared to EDDS. At higher concentration of complexing agent, less difference between the agents was found and less pH dependence. There was an increase in heavy metal extraction with decreasing pH, but this was offset by an increase in Ca and Fe extraction. In sequential extractions EDDS extracted metals almost exclusively from the exchangeable, mobile, and Mn-oxide fractions. We conclude that the extraction with EDDS at pH 7 showed the best compromise between extraction efficiency for Cu, Zn, and Pb and loss of Ca and Fe from the soil.

  6. VIS/NIR Spectroscopy to determine the spatial variation of the weathering degree in Paleogene clay soil - London Clay Formation

    Science.gov (United States)

    Nasser, Mohammed; Gibson, Andy, ,, Dr; Koor, Nick, ,, Dr; Gale, Professor Andy; Huggett, Jenny, ,, Dr; Branch, Steve

    2017-04-01

    The London Clay Formation (LCF) which underlies much of South-East England is hugely important as a construction medium. However, its geotechnical performance (shear strength, compressive strength, shrink-swell behaviour, etc. ) is greatly affected by its degree of weathering. Despite this importance, little attention has been focussed on a robust method to define and measure its degree of weathering. This is perhaps a result of a well-known colour change from bluish-grey to brown that accompanies 'weathering' and considered to be the result of oxidisation (Chandler and Apted 1988). Through wide experience, this definition is normally effective, but it is perhaps subjective and reliant on the experience of the investigator and the ability to observe samples or exposures. More objective investigation, typically using SEM is not normally economically feasible or expedient for construction works. We propose a simple, robust method to characterise the degree of weathering in the LCF using reflective or Visible-Near-InfraRed-Spectroscopy (VNIRS). 24 samples were extracted from 2 boreholes drilled in the Hampstead area of London to depths of 12 m within the uppermost Claygate Member of the LCF. VNIRS spectra (350-2500 nm) were measured from all samples and compared with XRD, XRF, SEM and PSD results on the same samples. Results show increased magnitude of absorption features related to clay mineralogy around 1400, 1900 and 2200 nm to a depth of 5 m beneath ground level. Beneath this depth, the absorption features show little variation. SEM analyses show corresponding changes in the degradation of pyrite crystals and individual clay (illite/smectite). These preliminary results show that there is a good potential for VNIRS spectroscopy to determine the variation of weathering in the LCF.

  7. The ratio of clay content to total organic carbon content is a useful parameter to predict adsorption of the herbicide butachlor in soils.

    Science.gov (United States)

    Liu, Zhongzhen; He, Yan; Xu, Jianming; Huang, Panming; Jilani, Ghulam

    2008-03-01

    Thirteen soils collected from 11 provinces in eastern China were used to investigate the butachlor adsorption. The results indicated that the total organic carbon (TOC) content, clay content, amorphous Fe2O3 content, silt content, CEC, and pH had a combined effect on the butachlor sorption on soil. Combination of the data obtained from the 13 soils in the present study with other 23 soil samples reported by other researchers in the literature showed that Koc would be a poor predictive parameter for butachlor adsorption on soils with TOC content higher than 4.0% and lower than 0.2%. The soils with the ratio of clay content to TOC content (RCO) values less than 60 adsorbed butachlor mainly by the partition into soil organic matter matrix. The soils with RCO values higher than 60 apparently adsorbed butachlor by the combination of the partition into soil organic matter matrix and adsorption on clay surface.

  8. heavy metal fixation in contaminated soil using non-toxic agents

    African Journals Online (AJOL)

    USER

    2013-05-08

    May 8, 2013 ... The effectiveness of natural clay, calcium phosphate, poultry manure and rice husks as ... BCR extractions showed that the agents attenuated Cu and Pb mobilities ... metal contamination of soil may pose risks and hazards.

  9. Research Progress of Artificial Forest in the Remediation of Heavy Metal Contaminated Soils

    Science.gov (United States)

    Jiafang, MA; Guangtao, MENG; Liping, HE; Guixiang, LI

    2017-01-01

    (1) Remediation of soil contaminated by heavy metals has become a hot topic in the world, and phytoremediation technology is the most widely used. (2) In addition to traditional economic benefits, ecological benefits of artificial forest have been more and more important, which are very helpful to soil polluted with heavy metals in the environment. (3) The characteristics of heavy metal pollution of soil and plantations of repair mechanism have been reviewed, and the current mining areas, wetlands, urban plantations on heavy metal elements have enriched the research results. The purpose is to find a new path for governance of heavy metal soil pollution.

  10. Chemical methods and phytoremediation of soil contaminated with heavy metals.

    Science.gov (United States)

    Chen, H M; Zheng, C R; Tu, C; Shen, Z G

    2000-07-01

    The effects of chemical amendments (calcium carbonate (CC), steel sludge (SS) and furnace slag (FS)) on the growth and uptake of cadmium (Cd) by wetland rice, Chinese cabbage and wheat grown in a red soil contaminated with Cd were investigated using a pot experiment. The phytoremediation of heavy metal contaminated soil with vetiver grass was also studied in a field plot experiment. Results showed that treatments with CC, SS and FS decreased Cd uptake by wetland rice, Chinese cabbage and wheat by 23-95% compared with the unamended control. Among the three amendments, FS was the most efficient at suppressing Cd uptake by the plants, probably due to its higher content of available silicon (Si). The concentrations of zinc (Zn), lead (Pb) and Cd in the shoots of vetiver grass were 42-67%, 500-1200% and 120-260% higher in contaminated plots than in control, respectively. Cadmium accumulation by vetiver shoots was 218 g Cd/ha at a soil Cd concentration of 0.33 mg Cd/kg. It is suggested that heavy metal-contaminated soil could be remediated with a combination of chemical treatments and plants.

  11. Swelling clays and salt-affected soils : demixing of Na / Ca clays as the rationale for discouraging the use of sodium adsorption ratio (SAR

    Directory of Open Access Journals (Sweden)

    Guilhem Bourrie

    2014-12-01

    Full Text Available Sodium adsorption ratio SAR defined as SAR = (Na / V w(Ca+Mg/2 here concentrations of cations in solution are expressed in meq/L has long been considered as correlated to exchangeable sodium percentage (ESP on clay minerals or soil exchange complex, and as the key concept to explain swelling of clay minerals and the difficulties of reclaiming salt-affected soils. Though its basis is empirical, it was alleged to be theoretically justified on the basis of ion exchange, derived from the Gapon convention. However, it has long been challenged on the basis of both field observations and experimental evidence : it fails to account for the fact that calcium and magnesium do not play the same role, while potassium is absent from the formula ; calcium concentration must be “corrected “when calcite is present etc. There exist specific ion effects. Experimental measurements of the decrease of permeability when solutions are diluted led Quirk and Schofield (1955 to define the concept of critical threshold, and to show that potassium and magnesium play an intermediate role between sodium and calcium. This threshold is simply determined by the concentration of calcium, irrespective of the value of SAR or ESP. Indeed, demixing of Ca-Na clay minerals during ion exchange, a phenomenon well known since Glaeser and Mering (1954, implies that there exists an interaction between adjacent sites. This undermines the theoretical basis of SAR : the derivation of SAR from ion exchange equilibria implies to use an equilibrium constant. This parameter is no more constant if demixing occurs. The results obtained are positive : demixing leads to expulsion of sodium from inner exchange surfaces and its replacement by calcium, according to the “three crystals pore”proposed by Quirk (2003b. Sodium can then be more easily leached, as permeability is maintained by clusters of Ca-sites. Calcium concentration in solution appears thus as the simpler parameter to guide

  12. Aldehyde dehydrogenase expression in Metaphire posthuma as a bioindicator to monitor heavy metal pollution in soil.

    Science.gov (United States)

    Panday, Raju; Bhatt, Padam Shekhar; Bhattarai, Tribikram; Shakya, Kumudini; Sreerama, Lakshmaiah

    2016-11-21

    Soil contamination and associated pollution plays a detrimental role in soil flora and fauna. Soil is processed and remodeled by subterranean earthworms, accordingly are referred to as soil chemical engineers. These worms, besides processing carbon and nitrogen, serve as minors for processing metals. In heavy metal contaminated soils, they accumulate heavy metals, which in turn cause altered gene expression, including aldehyde dehydrogenase (ALDH) enzymes. This study explores the possibility of ALDH expression in earthworms as a novel biomarker for the heavy metal contamination of soil. Earthworms cultured in contaminated soils accumulated significantly higher levels of Pb and Cd. Similarly, significantly higher levels of ALDH enzyme activities were observed in earthworms cultured in soils contaminated with Pb and Cd. The ALDH activity was found to be highest in worms cultured in 5 ppm heavy metal contaminated soils. Although, ALDH activities decreased as the heavy metal concentration in soil increased, they were significantly higher when compared to control worms cultured in uncontaminated soils. The accumulation of heavy metal in earthworms measured after 28 days decreased as the heavy metal concentration in soil increased. Levels of ALDH expression correlated with total Pb and Cd concentration in the earthworm tissue. This study showed that the ALDH activity in earthworms could potentially be used as a biomarker to show heavy metal pollution in soil.

  13. An Improved Description of the Seismic Response of Sites with High Plasticity Soils, Organic Clays, and Deep Soft Soil Deposits

    Science.gov (United States)

    Carlton, Brian

    Near surface soils can greatly influence the amplitude, duration, and frequency content of ground motions. The amount of their influence depends on many factors, such as the geometry and engineering properties of the soils and underlying bedrock, as well as the earthquake source mechanism and travel path. Building codes such as the 2012 International Building Code (IBC) define six site categories for seismic design of structures, which are based on the sites defined by the National Earthquake Hazards Reduction Program (NEHRP). Site categories A, B, C, D, and E are defined by the time averaged shear wave velocity over the top 30 meters of the soil deposit. Site category F is defined as sites that include liquefiable or sensitive soils, as well as sites with more than 3 meters (10 ft) of peat or highly organic clays, more than 7.5 meters (25 ft) of soil with PI > 75, and more than 37 meters (120 ft) of soft to medium stiff clays. The IBC specifies simplified procedures to calculate design spectra for NEHRP sites A through E, and requires a site specific investigation for NEHRP F sites. However, established procedures for performing the required site specific investigations for NEHRP F sites are limited. The objective of this research is to develop a simplified procedure to estimate design spectra for non-liquefiable NEHRP F sites, specifically sites with organic soils, highly plastic soils, and deep soft soil deposits. The results from this research will directly affect US practice by developing much needed guidelines in this area. There is little empirical data on the seismic response of non-liquefiable NEHRP F sites. As a result, this study focused on generating data from site response analyses. To capture the variability of ground motions, this study selected five base case scenarios according to tectonic environments and representative cases encountered in common US practice. Suites of ground motions for each scenario were created by collecting ground motions

  14. Spatially Explicit Estimation of Clay and Organic Carbon Content in Agricultural Soils Using Multi-Annual Imaging Spectroscopy Data

    Directory of Open Access Journals (Sweden)

    Heike Gerighausen

    2012-01-01

    Full Text Available Information on soil clay and organic carbon content on a regional to local scale is vital for a multitude of reasons such as soil conservation, precision agriculture, and possibly also in the context of global environmental change. The objective of this study was to evaluate the potential of multi-annual hyperspectral images acquired with the HyMap sensor (450–2480 nm during three flight campaigns in 2004, 2005, and 2008 for the prediction of clay and organic carbon content on croplands by means of partial least squares regression (PLSR. Supplementary, laboratory reflectance measurements were acquired under standardized conditions. Laboratory spectroscopy yielded prediction errors between 19.48 and 35.55 g kg−1 for clay and 1.92 and 2.46 g kg−1 for organic carbon. Estimation errors with HyMap image spectra ranged from 15.99 to 23.39 g kg−1 for clay and 1.61 to 2.13 g kg−1 for organic carbon. A comparison of parameter predictions from different years confirmed the predictive ability of the models. BRDF effects increased model errors in the overlap of neighboring flight strips up to 3 times, but an appropriated preprocessing method can mitigate these negative influences. Using multi-annual image data, soil parameter maps could be successively complemented. They are exemplarily shown providing field specific information on prediction accuracy and image data source.

  15. A lysimeter experiment to investigate the leaching of veterinary antibiotics through a clay soil and comparison with field data

    Energy Technology Data Exchange (ETDEWEB)

    Kay, Paul [Cranfield Centre for EcoChemistry, Cranfield University, Shardlow Hall, Shardlow, Derby DE72 2GN (United Kingdom)]. E-mail: paul.kay@adas.co.uk; Blackwell, Paul A. [Cranfield Centre for EcoChemistry, Cranfield University, Shardlow Hall, Shardlow, Derby DE72 2GN (United Kingdom); Boxall, Alistair B.A. [Cranfield Centre for EcoChemistry, Cranfield University, Shardlow Hall, Shardlow, Derby DE72 2GN (United Kingdom)

    2005-03-01

    Pharmaceuticals used in livestock production may be present in manure and slurry as the parent compound and/or metabolites. The environment may therefore be exposed to these substances due to the application of organic fertilisers to agricultural land or deposition by grazing livestock. For other groups of substances that are applied to land (e.g. pesticides), preferential flow in clay soils has been identified as an extremely important mechanism by which surface water pollution can occur. This lysimeter study was therefore performed to investigate the fate of three antibiotics from the sulphonamide, tetracycline and macrolide groups in a clay soil. Only sulphachloropyridazine was detected in leachate and soil analysis at the end of the experiment showed that almost no antibiotic residues remained. These data were analysed alongside field data for the same compounds to show that soil tillage which breaks the connectivity of macropores formed over the summer months, prior to slurry application, significantly reduces chemical mobility. - This paper describes one of the first studies to investigate the fate of veterinary medicines in cracking clay soils.

  16. [Mineralogy and genesis of mixed-layer clay minerals in the Jiujiang net-like red soil].

    Science.gov (United States)

    Yin, Ke; Hong, Han-Lie; Li, Rong-Biao; Han, Wen; Wu, Yu; Gao, Wen-Peng; Jia, Jin-Sheng

    2012-10-01

    Mineralogy and genesis were investigated using X-ray diffraction (XRD), Fourier infrared absorption spectroscopy (FTIR) and high resolution transmission electron microscopy (HRTEM) to understand the mineralogy and its genesis significance of mixed-layer clay minerals in Jiujiang red soil section. XRD and FTIR results show that the net-like red soil sediments are composed of illite, kaolinite, minor smectite and mixed-layer illite-smectite and minor mixed-layer kaolinite-smectite. HRTEM observation indicates that some smectite layers have transformed into kaolinite layers in net-like red soil. Mixed-layer illite-smectite is a transition phase of illite transforming into smectite, and mixed-layer kaolinite-smectite is a transitional product relative to kaolinite and smectite. The occurrence of two mixed-layer clay species suggests that the weathering sequence of clay minerals in net-like red soil traversed from illite to mixed-layer illite-smectite to smectite to mixed-layer kaolinite-smectite to kaolinite, which indicates that net-like red soil formed under a warm and humid climate with strengthening of weathering.

  17. Effect of various amendments on heavy mineral oil bioremediation and soil microbial activity.

    Science.gov (United States)

    Lee, Sang-Hwan; Oh, Bang-Il; Kim, Jeong-gyu

    2008-05-01

    To examine the effects of amendments on the degradation of heavy mineral oil, we conducted a pilot-scale experiment in the field for 105 days. During the experiment, soil samples were collected and analyzed periodically to determine the amount of residual hydrocarbons and evaluate the effects of the amendments on microbial activity. After 105 days, the initial level of contamination (7490+/-480 mg hydrocarbon kg(-1) soil) was reduced by 18-40% in amended soils, whereas it was only reduced by 9% in nonamended soil. Heavy mineral oil degradation was much faster and more complete in compost-amended soil than in hay-, sawdust-, and mineral nutrient-amended soils. The enhanced degradation of heavy mineral oil in compost-amended soil may be a result of the significantly higher microbial activity in this soil. Among the studied microbial parameters, soil dehydrogenase, lipase, and urease activities were strongly and negatively correlated with heavy mineral oil biodegradation (Pamended soil.

  18. Carbon sequestration in clay and silt fractions of Brazilian soils under conventional and no-tillage systems

    Directory of Open Access Journals (Sweden)

    Cecília Estima Sacramento dos Reis

    2014-08-01

    Full Text Available The capacity of soils to sequestrate carbon (C is mainly related to the formation of organo-mineral complexes. In this study, we investigated the influence of soil management systems on the C retention capacity of soil with an emphasis on the silt and clay fractions of two subtropical soils with different mineralogy and climate. Samples from a Humic Hapludox and a Rhodic Hapludox, clayey soils cultivated for approximately 30 years under no-tillage (NT and conventional tillage (CT were collected from six layers distributed within 100-cm soil depth from each site and from an adjacent native forest. After the removal of particulate organic matter (POM, the suspension (<53 µm was sonicated, the silt and clay fractions were separated in accordance with Stokes' law and the carbon content of whole soil and physical fractions was determined. In the Humic Hapludox, the clay and silt fractions under NT showed a higher maximum C retention (72 and 52 g kg-1, respectively in comparison to those under CT (54 and 38 g kg-1, respectively. Moreover, the C concentration increase in both fractions under NT occurred mainly in the topsoil (up to 5 cm. The C retention in physical fractions of Rhodic Hapludox varied from 25 to 32 g kg-1, and no difference was observed whether under an NT or a CT management system. The predominance of goethite and gibbsite in the Humic Hapludox, as well as its exposure to a colder climate, may have contributed to its greater C retention capacity. In addition to the organo-mineral interaction, a mechanism of organic matter self-assemblage, enhanced by longer periods of soil non-disturbance, seems to have contributed to the carbon stabilization in both soils.

  19. Production of CO2 in crude oil bioremediation in clay soil

    Directory of Open Access Journals (Sweden)

    Sandro José Baptista

    2005-06-01

    Full Text Available The aim of the present work was to evaluate the biodegradation of petroleum hydrocarbons in clay soil a 45-days experiment. The experiment was conducted using an aerobic fixed bed reactor, containing 300g of contaminated soil at room temperature with an air rate of 6 L/h. The growth medium was supplemented with 2.5% (w/w (NH42SO4 and 0.035% (w/w KH2PO4. Biodegradation of the crude oil in the contaminated clay soil was monitored by measuring CO2 production and removal of organic matter (OM, oil and grease (OandG, and total petroleum hydrocarbons (TPH, measured before and after the 45-days experiment, together with total heterotrophic and hydrocarbon-degrading bacterial count. The best removals of OM (50%, OandG (37% and TPH (45% were obtained in the bioreactors in which the highest CO2 production was achieved.O objetivo do trabalho foi avaliar a biodegradação de petróleo em solo argiloso durante 45 dias de ensaios. Os ensaios de biodegradação foram conduzidos em biorreatores aeróbios de leito fixo, com 300 g de solo contaminado, à temperatura ambiente e com uma vazão de ar de 6 L/h. As deficiências nutricionais foram corrigidas com 2,5% (p/p (NH42SO4 e com 0,035% (p/p KH2PO4. O monitoramento foi realizado em função da produção de CO2, da remoção de matéria orgânica (OM, de óleos e graxas (OandG e de hidrocarbonetos totais de petróleo (TPH, além bactérias heterotróficas totais (BHT e hidrocarbonoclásticas (BHc, no início e após 45 dias. Nos biorreatores onde houve maior crescimento de bactérias hidrocarbonoclásticas e maior produção de CO2, obteve-se os melhores percentuais de remoções de MO (50%, OandG (37% e TPH (45%.

  20. Comparative characterization of sewage sludge compost and soil: Heavy metal leaching characteristics.

    Science.gov (United States)

    Fang, Wen; Wei, Yonghong; Liu, Jianguo

    2016-06-05

    The leaching and accumulation of heavy metals are major concerns following the land application of sewage sludge compost (SSC). We comparatively characterized SSC, the reference soil, and the SSC amended soil to investigate their similarities and differences regarding heavy metal leaching behavior and then to evaluate the effect of SSC land application on the leaching behavior of soil. Results showed that organic matter, including both of particulate organic matter (POM) and dissolved organic matter (DOM), were critical factors influencing heavy metal leaching from both of SSC and the soil. When SSC was applied to soil at the application rate of 48t/ha, the increase of DOM content slightly enhanced heavy metal leaching from the amended soil over the applicable pH domain (6heavy metal speciation in the solid phase were similar between the reference soil and the amended soil.

  1. Field corrosion characterization of soil corrosion of X70 pipeline steel in a red clay soil

    Institute of Scientific and Technical Information of China (English)

    Shengrong Wang; Cuiwei Dun; Xiaogang Li; Zhiyong Liunn; Min Zhu; Dawei Zhang

    2015-01-01

    The corrosion behavior of X70 pipeline steel buried in red soil environment has been studied. The surface morphology and elemental distribution were determined by scanning electron microscopy (SEM),energy dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD). The corrosion kinetics was evaluated by weight loss measurement. The results show that in red soil, the corrosion rate of X70 steel decreases with time, and follows the exponential decay law. General corrosion with non-uniform and localized pitting occurred on the steel surface.α-FeOOH was the dominate products during corrosion in whole buried periods, and the corrosion products exhibited well protective properties. The potentiodynamic polarization tests revealed that icorr decreased with time, indicating the improvement of corrosion resistance. The results of Electrochemical impendence spectroscopy (EIS) are consistent with potentiodynamic polarization tests.

  2. Field corrosion characterization of soil corrosion of X70 pipeline steel in a red clay soil

    Directory of Open Access Journals (Sweden)

    Shengrong Wang

    2015-06-01

    Full Text Available The corrosion behavior of X70 pipeline steel buried in red soil environment has been studied. The surface morphology and elemental distribution were determined by scanning electron microscopy (SEM,energy dispersive X-ray spectroscopy (EDS, and X-ray diffraction (XRD. The corrosion kinetics was evaluated by weight loss measurement. The results show that in red soil, the corrosion rate of X70 steel decreases with time, and follows the exponential decay law. General corrosion with non-uniform and localized pitting occurred on the steel surface. α-FeOOH was the dominate products during corrosion in whole buried periods, and the corrosion products exhibited well protective properties. The potentiodynamic polarization tests revealed that icorr decreased with time, indicating the improvement of corrosion resistance. The results of Electrochemical impendence spectroscopy (EIS are consistent with potentiodynamic polarization tests.

  3. Effects of Earthworm and Microbe on Soil Nutrients and Heavy Metals

    Institute of Scientific and Technical Information of China (English)

    SHEN Wei-bao; YANG Hong-qiang

    2008-01-01

    Earthworm and microbe are very important soil organisms. They play an important role in the stability of ecosystem and the bioavailability of nutrients and heavy metals in soils. This article reviewed the function of earthworm and microbes in improving soil structure and controlling soil nutrients as well as their effects on the bioavailability of heavy metals in soil through bioabsorption, enrichment, precipitation, dissolution, and oxidation-reduction. The aim is to provide a certain theoretical basis for modern agricultural production.

  4. Evidence for groundwater contamination by heavy metals through soil passage under acidifying conditions

    NARCIS (Netherlands)

    Wilkens, B.J.

    1995-01-01

    The research reported here is aimed at improving the knowledge of the mobility of the heavy metals cadmium and zinc in vulnerable soil types. We use the term vulnerable with reference to vulnerability of groundwater for contamination by soil leaching. At diffuse soil immissions of heavy metals, accu

  5. Chemical speciation of heavy metals in sandy soils in relation to availability and mobility

    NARCIS (Netherlands)

    Temminghoff, E.J.M.

    1998-01-01

    The environmental risk of heavy metals which are present in soil at a certain total content is highly dependent on soil properties. Chemical speciation is a comprehensive term for the distribution of heavy metals over all possible chemical forms (species) in soil solution and in the solid

  6. Chemical speciation of heavy metals in sandy soils in relation to availability and mobility.

    NARCIS (Netherlands)

    Temminghoff, E.J.M.

    1998-01-01

    The environmental risk of heavy metals which are present in soil at a certain total content is highly dependent on soil properties. Chemical speciation is a comprehensive term for the distribution of heavy metals over all possible chemical forms (species) in soil solution and in the solid phase. The

  7. Using vis-NIR to predict soil organic carbon and clay at national scale: validation of geographically closest resampling strategy

    DEFF Research Database (Denmark)

    Peng, Yi; Knadel, Maria; Greve, Mette Balslev

    2016-01-01

    The Danish soil visible-near infrared (vis-NIR) spectral library has proved capable of predicting soil properties in Denmark such as soil organic carbon (SOC) at field scale using the geographically closest resampling strategy. However, this strategy has only been tested on one Danish local field....../farm and for future application it is necessary to extend this approach to all types of Danish soils and evaluate the predictive capabilities of the library at national scale. In the present study, partial least squares regression was used to develop models and predict topsoil SOC (490 samples) and clay contents (442...... samples) for soils from each 7-km grid sampling point in the country. In the resampling and modelling process, each target sample was predicted by a specific model which was calibrated using geographically closest soil spectra. The geographically closest 20, 30, 40, and 50 sampling points (profiles) were...

  8. Toxicity testing of heavy-metal-polluted soils with algae Selenastrum capricornutum: a soil suspension assay.

    Science.gov (United States)

    Aruoja, Villem; Kurvet, Imbi; Dubourguier, Henri-Charles; Kahru, Anne

    2004-08-01

    A small-scale Selenastrum capricornutum (Rhapidocelis subcapitata) growth inhibition assay was applied to the toxicity testing of suspensions of heavy-metal-polluted soils. The OECD 201 standard test procedure was followed, and algal biomass was measured by the fluorescence of extracted chlorophyll. The soils, which contained up to (per kilogram) 1390 mg of Zn, 20 mg of Cd, and 1050 mg of Pb were sampled around lead and zinc smelters in northern France. The water extractability of the metals in suspensions (1 part soil/99 parts water w/v) was not proportional to the pollution level, as extractability was lower for soil samples that were more polluted. Thus, the same amount of metals could be leached out of soils of different levels of pollution, showing that total concentrations of heavy metals in soil (currently used for risk assessment purposes) are poor predictors of the real environmental risk via the soil-water path. Despite high concentrations of water-extracted zinc (0.6-1.4 mg/L of Zn in the test), exceeding by approximately 10-fold the EC(50) value for S. capricornutum (0.1 mg Zn/L), 72-h algal growth in the soil extracts was comparable or better than growth in the standard control OECD mineral medium. The soil suspension stimulated the growth of algae up to eightfold greater than growth using the OECD control medium. Growth stimulation of algae was observed even when soil suspensions contained up to 12.5 mg Zn/L and could not be explained by supplementary nitrogen, phosphorous, and carbonate leached from the soil. However, if the growth of algae in suspensions of clean and polluted soils was compared, a dose-dependent inhibitory effect of metals on algal growth was demonstrated. Thus, as soil contains nutrients/supplements that mask the adverse effect of heavy metals, a clean soil that has properties similar to the polluted soils should be used instead of mineral salt solution as a control for analysis of the ecotoxicity of soils. Copyright 2004 Wiley

  9. Using Orthosiphon stamineus B. for Phytoremediation of Heavy Metals in Soils Amended with Sewage Sludge

    Directory of Open Access Journals (Sweden)

    Arifin Abdu

    2011-01-01

    Full Text Available Problem statement: Phytoremediation is a biological treatment where plants are used to remove pollutants from the environment to make them harmless. A study was conducted in a greenhouse at the Faculty of Forestry, University Putra Malaysia on the potential of Orthosiphon stamineus B. planted in sewage sludge for heavy metals uptake. The objective of this study was to evaluate the ability of O. stamineus to remove toxic heavy metals from sewage sludge. Approach: A total of 36 of O. stamineus were treated at six different levels of soil mixture and sludge treatment including one control. The treatments were replicated six times. Growth parameters mainly height and basal diameter were measured for each plant within 10 weeks. Soil texture (pipette method, soil pH (glass-electrode method and total carbon (C (Los on Ignition were determined. The concentration of heavy metals that include cadmium (Cd, chromium (Cr, zinc (Zn, copper (Cu and lead (Pb in the planting media and plant parts were analyzed using Inductively Coupled Plasma-Mass Spectrometry (ICP-MS. Results: There was a significant difference (P≤0.05 in height, basal diameter and number of leaves among the six treatments. The height increment values for all treatments in descending order are: T3 (10.22 cm, T2 (12.42 cm, T1 (13.92 cm, T5 (14.65 cm, T4 (16.20 cm and C (16.97 cm. In terms of basal diameter, the highest incremental values in descending order are: T5 (0.99 mm, T1 (1.20 mm, T3 (1.31 mm, T2 (1.38 mm, T4 (1.53 mm and C (1.75 mm. Soil texture for the control is categorized as clay and for T5 is silt loam. Soil reaction is acidic while total carbon ranges from 16.7% to 61.3 %. The concentrations of heavy metals in the planting medium were higher before planting as compared to after planting. For examples, the values for Cd, Cr, Zn, Cu and Pb in T5 (100% sewage sludge before planting are 0.18 ppm, 23.45 ppm, 290.05 ppm, 17.07 ppm and 5.33 ppm, respectively. The

  10. Heavy metal accumulation in balsam pear and cowpea related to the geochemical factors of variable-charge soils in the Pearl River Delta, South China.

    Science.gov (United States)

    Chang, Chun-Ying; Xu, Xiang-Hua; Liu, Chuan-Ping; Li, Shu-Yi; Liao, Xin-Rong; Dong, Jun; Li, Fang-Bai

    2014-07-01

    Variable-charge (v-c) soils in subtropical areas contain considerable amounts of iron/aluminum (Fe/Al) oxides that can strongly influence the fate of heavy metals in agricultural ecosystems. However, the relationship between heavy metal accumulation in vegetables and the geochemical factors associated with v-c soils in subtropical regions remains unknown. The present study investigated heavy metal accumulation under field conditions in the Pearl River Delta (PRD) by measuring the content of 8 heavy metals (zinc (Zn), arsenic (As), copper (Cu), mercury (Hg), lead (Pb), chromium (Cr), nickel (Ni) and cadmium (Cd)) in 43 pairs of v-c soil and vegetable (balsam pear and cowpea) samples. Soil physicochemical properties including pH, texture, organic matter and oxide minerals (Fe2O3, SiO2, Al2O3, CaO, MgO, K2O and Na2O) were also analyzed. Heavy metal accumulation from soil to vegetables was assessed based on bioconcentration factors (BCFs). The results showed that soil extractable Fe, oxide minerals and chemical weathering indices of v-c soils strongly affected heavy metal accumulation, whereas the content of Zn, Cu, Cr and Ni in vegetables was strongly affected by the soil clay content. Significant correlations were found between the BCFs of heavy metals and oxide minerals. However, no significant relationship was found between pH and heavy metal accumulation (except for Cu) in balsam pear and cowpea. Correlation analyses showed that a lower oxalate/DCB- extractable Fe content might indicate greater heavy metal (Zn, Cu, Hg, Cr and Ni) accumulation in vegetables. Therefore, it can be deduced that oxalate/DCB- extractable Fe content is a critical geochemical factor that determines the bioavailability of heavy metals and that iron biogeochemical cycles play vital roles in the fate of heavy metals in vegetable fields in this area. These findings provide new insights into the behaviors and fate of heavy metals in subtropical v-c soils and can be used to develop possible

  11. The effects of soil amendments on heavy metal bioavailability in two contaminated Mediterranean soils

    Energy Technology Data Exchange (ETDEWEB)

    Walker, D.J.; Clemente, Rafael; Roig, Asuncion; Bernal, M.P

    2003-04-01

    The effects of organic amendments on metal bioavailability were not always related to their degree of humification. - Two heavy metal contaminated calcareous soils from the Mediterranean region of Spain were studied. One soil, from the province of Murcia, was characterised by very high total levels of Pb (1572 mg kg{sup -1}) and Zn (2602 mg kg{sup -1}), whilst the second, from Valencia, had elevated concentrations of Cu (72 mg kg{sup -1}) and Pb (190 mg kg{sup -1}). The effects of two contrasting organic amendments (fresh manure and mature compost) and the chelate ethylenediaminetetraacetic acid (EDTA) on soil fractionation of Cu, Fe, Mn, Pb and Zn, their uptake by plants and plant growth were determined. For Murcia soil, Brassica juncea (L.) Czern. was grown first, followed by radish (Raphanus sativus L.). For Valencia soil, Beta maritima L. was followed by radish. Bioavailability of metals was expressed in terms of concentrations extractable with 0.1 M CaCl{sub 2} or diethylenetriaminepentaacetic acid (DTPA). In the Murcia soil, heavy metal bioavailability was decreased more greatly by manure than by the highly-humified compost. EDTA (2 mmol kg{sup -1} soil) had only a limited effect on metal uptake by plants. The metal-solubilising effect of EDTA was shorter-lived in the less contaminated, more highly calcareous Valencia soil. When correlation coefficients were calculated for plant tissue and bioavailable metals, the clearest relationships were for Beta maritima and radish.

  12. Investigation of Different Forms of Potassium as a Function of Clay Mineralogy and Soil Evolution in Some Soils of Fars Province

    Directory of Open Access Journals (Sweden)

    N. Sadri

    2016-10-01

    Full Text Available Introduction: The optimum and sustainable use of soil is only possible with a correct and complete understanding of its properties. Potassium (K+ is an essential element for plant growth and is a dynamic ion in the soil system and its importance in agriculture is well recognized. According to increasing order of plant availability, soil K exists in four forms: mineral (5000-25000 ppm, nonexchangeable (50-750 ppm, exchangeable (40-600 ppm, and solution (1-10 ppm. K cycling or transformations among the K forms in soils are dynamic. The objectives of the present research were to study the relationship between different forms of potassium and clay mineralogy as well as soil evolution of 14 surface soil samples from some selected locations of Fars Province. Materials and methods: Fars provinces, with an area of 122000 km2 located in southern Iran. The elevation varies from 500 m to 4400 m above mean sea level. Mean annual precipitation ranges from about 350 mm to 850 mm. Mean annual temperature ranges from 10°C to 24°C. According to Soil Moisture and Temperature Regime Map of Iran, the soils comprise xeric, and ustic moisture regimes along with mesic, thermic and hyperthemic temperature regimes. Based on the previous soil survey maps of Fars province, 14 surface soil samples were collected. Routine physicochemical analyses and clay mineralogy were performed on soil samples. Soil reaction, texture, electrical conductivity, calcium carbonate, and gypsum were identified. Soluble potassium, exchangeable potassium, non exchangeable potassium, and mineral potassium were measured. The amounts of K forms in each sample were determined. Total K was determined following digestion (110°C of soil with 48 % HF and 6 M HCl. Water soluble K was measured in the saturated extract. Exchangeable K was extracted with 20 ml 1.0 M NH4OAc (pH 7.0 for 5 min. Nitric acid-extractable K was measured by extraction of a soil sample with boiling 1.0 M HNO3 for 1 h. Potassium

  13. Mutagenic activity of heavy metals in soils of wayside slopes

    Science.gov (United States)

    Fedorova, A. I.; Kalaev, V. N.; Prosvirina, Yu. G.; Goryainova, S. A.

    2007-08-01

    The genotoxic properties of soils polluted with heavy metals were studied on two wayside slopes covered with trees in the city of Voronezh. The nucleolar test in cells of the apical meristem of Zebrina pendula Schnizl. roots was used. The genotoxic effect of the soils was revealed according to the increased number of 2-and 3-nucleolar cells (from 41 to 54% and from 19 to 23% in the upper part of the first and second slopes, respectively; in the control, their number was 18 and 7%). The mean number of nucleoli per cell increased from 1.7 to 1.95 in the experiment and 1.31 in the control. The increased vehicle emissions, especially when cars go up the slopes (mainly in the upper and middle parts), correlated with the elevated heavy metal (Pb, Cu, Cd, and Zn) contents in the soil. The mutagenic substances may be removed to the Voronezh Reservoir, where they may be accumulated in some living organisms.

  14. Spatial Patterns of Soil Heavy Metals in Urban-Rural Transition Zone of Beijing

    Institute of Scientific and Technical Information of China (English)

    HU Ke-Lin; ZHANG Feng-Rong; LI Hong; HUANG Feng; LI Bao-Guo

    2006-01-01

    To identify the main sources responsible for soil heavy metal contamination, 70 topsoils were sampled from the Daxing County in the urban-rural transition zone of Beijing. The concentrations of heavy metals Cu, Zn, Pb, Cr, Cd, Ni,As, Se, Hg, and Co; the soil texture; and the organic matter content were determined for each soil sample. Descriptive statistics and geostatistics were used to analyze the data, and Kriging analysis was used to estimate the unobserved points and to map the spatial patterns of soil heavy metals. The results showed that the concentrations of all the soil heavy metals exceeded their background levels with the exception of As and Se. However, only the Cd concentration in some areas exceeded the critical value of the national soil quality standard. The semivariance analysis showed that the spatial correlation distances for soil Cu, Zn, Cr, Cd, As, Ni, and Co ranged from 4.0 to 7.0 km, but soil Se, Pb, and Hg had a larger correlation distance. Soil Co, Se, Cd, Cu and Zn showed a strong spatial correlation, whereas the other soil heavy metals showed medium spatial correlation. Soil heavy metal concentrations were related to soil texture, organic matter content, and the accumulation of heavy metals in the soils, which was because of air deposition and use of water from the Liangshui, Xinfeng, and Fenghe rivers that are contaminated by wastewater and sewage for the purpose of irrigation of fields. Hence, a comprehensive treatment plan for these rivers should be formulated.

  15. Anomalous values of heavy metals in soil of cemetery

    Directory of Open Access Journals (Sweden)

    Carlos Eduardo Balestrin Flores

    2012-04-01

    Full Text Available The necro chorume generated by the decomposition of human bodies has a high pollution load and depending on its location, it may reach and contaminate the soil, the surface and underground water resources. The problem is critical because the analyzed cemetery is located in a vulnerable area and the surrounding population makes use of the water under the influence of the necro chorume, and therefore, subjected to water carrying diseases. This study aimed to analyze the concentrations of heavy metals barium, copper, chromium and zinc in soil occupied by necropolis. An auger was used to collect soil samples in 10 different sites and depths. For determining the concentration of metals, the technique of fluorescence X-ray Energy Dispersive with the support of the software Surfer 10 was used to spatially generate concentration data maps. The concentrations of barium and copper indicated contamination of the soil in all sampled sites, while the chrome showed evidence of contamination at various depths between 0 and 300 cm. The lowest topographic point was the only one to have zinc concentration above reference values, indicating a contamination by this element in the surface flow and sub-surface water. With these results we can confirm the potential of metal contamination in soil occupied by the cemetery.

  16. Influence of the insecticides acetamiprid and carbofuran on arylamidase and myrosinase activities in the tropical black and red clay soils.

    Science.gov (United States)

    Mohiddin, G Jaffer; Srinivasulu, M; Maddela, N R; Manjunatha, B; Rangaswamy, V; Koch Kaiser, Alma Rosel; Maisincho Asqui, Jessica Cristina; Darwin Rueda, O

    2015-06-01

    The objective of this study was to determine the effects of two insecticides, namely, acetamiprid and carbofuran on the enzymatic activities of arylamidase (as glucose formed from sinigrin) and myrosinase (as β-naphthylamine formed from L-leucine β-naphthylamide) in the black and red clay soils collected from a fallow groundnut (Arachis hypogaea L.) fields in the Anantapur District, Andhra Pradesh, India. The study was realized within the framework of the laboratory experiments in which the acetamiprid and carbofuran were applied to the soils at different doses (1.0, 2.5, 5.0, 7.5, 10.0 kg ha(-1)). Initially, the physicochechemical properties of the soil samples were analyzed. After 10 days of pesticide application, the soil samples were analyzed for the enzyme activities. Acetamiprid and carbofuran stimulated the arylamidase and myrosinase activities at lower concentrations after 10 days incubation. Striking stimulation in soil enzyme activities was noticed at 2.5 kg ha(-1), persists for 20 days in both the soils. Overall, higher concentrations (5.0-10.0 kg ha(-1)) of acetamiprid and carbofuran were toxic or innocuous to the arylamidase and myrosinase activities. Nevertheless, the outcomes of the present study clearly indicate that the use of these insecticides (at field application rates) in the groundnut fields (black and red clay soils) stimulated the enzyme (arylamidase and myrosinase) activities.

  17. PATTERNS OF THE DISTRIBUTION OF HEAVY METALS (NI, CR, PB IN THE MAIN SOILS TYPES OF THE FOOTHILLS OF DAGESTAN Закономерности распределения тяжелых металлов (Ni, Cr, Pb в основных типах почв предгорного Дагестана

    Directory of Open Access Journals (Sweden)

    Salikhov S. K.

    2012-04-01

    Full Text Available We investigated the basic soil types (brown, brown wood of foothill zone of Dagestan. We revealed that the distribution of nickel, chromium and lead in the soils depends on several factors: soil-forming rock, physical clay, humus and pH. We defined the background content of heavy metals in the studied soils of the region

  18. Heavy metals content in degraded agricultural soils of a mountain region related to soil properties

    Science.gov (United States)

    Navarro-Pedreño, José; Belén Almendro-Candel, María; Gómez, Ignacio; Jordán, Manuel M.; Bech, Jaume; Zorpas, Antonis

    2017-04-01

    Agriculture has been practiced for long time in Mediterranean regions. Intensive agriculture and irrigation have developed mainly in the valleys and coastal areas. In the mountainous areas, dry farming has been practiced for centuries. Soils have been fertilized using mainly organic amendments. Plants extracted nutrients and other elements like heavy metals presented in soils and agricultural practices modified soil properties that could favor the presence of heavy metals. In this work, it has been checked the content of heavy metals in 100 agricultural soils samples of the NorthWest area of the province of Alicante (Spain) which has been long cultivated with cereals and olive trees, and now soils are abandoned and degraded because of the low agricultural yields. European policy has the aim to improve the sustainable agriculture and recover landscapes of mountain regions. So that, it is important to check the state of the soils (Marques et al. 2007). Soils samples (arable layer) were analyzed determining: pH (1:5, w/v, water extract), equivalent calcium carbonate content, organic matter by Walkley-Black method (Nelson and Sommers 1996), micronutrients (Cu, Fe, Mn, Zn) extracted with DTPA (Lindsay and Norvell, 1978) and measured by atomic absorption spectrometry, and total content of metals (Cd, Cr, Ni, Pb) measured in soil samples after microwave acid digestion (Moral et al. 1996), quantifying the content of metals by ICP analysis. The correlation between soil properties and metals. The results indicated that pH and carbonates are the most important properties of these soils correlated with the metals (both micronutrients and heavy metals). The available micronutrients (all of them) are close correlated with the pH and carbonates in soils. Moreover, heavy metals like Pb and Ni are related to available Mn and Zn. Keywords: pH, carbonates, heavy metals, abandoned soils. References: Lindsay,W.L., andW.A. Norvell. 1978. "Development of a DTPA Soil Test for Zinc, Iron

  19. Bioavailability of heavy metals in soil: impact on microbial biodegradation of organic compounds and possible improvement strategies.

    Science.gov (United States)

    Olaniran, Ademola O; Balgobind, Adhika; Pillay, Balakrishna

    2013-05-15

    Co-contamination of the environment with toxic chlorinated organic and heavy metal pollutants is one of the major problems facing industrialized nations today. Heavy metals may inhibit biodegradation of chlorinated organics by interacting with enzymes directly involved in biodegradation or those involved in general metabolism. Predictions of metal toxicity effects on organic pollutant biodegradation in co-contaminated soil and water environments is difficult since heavy metals may be present in a variety of chemical and physical forms. Recent advances in bioremediation of co-contaminated environments have focussed on the use of metal-resistant bacteria (cell and gene bioaugmentation), treatment amendments, clay minerals and chelating agents to reduce bioavailable heavy metal concentrations. Phytoremediation has also shown promise as an emerging alternative clean-up technology for co-contaminated environments. However, despite various investigations, in both aerobic and anaerobic systems, demonstrating that metal toxicity hampers the biodegradation of the organic component, a paucity of information exists in this area of research. Therefore, in this review, we discuss the problems associated with the degradation of chlorinated organics in co-contaminated environments, owing to metal toxicity and shed light on possible improvement strategies for effective bioremediation of sites co-contaminated with chlorinated organic compounds and heavy metals.

  20. Bioavailability of Heavy Metals in Soil: Impact on Microbial Biodegradation of Organic Compounds and Possible Improvement Strategies

    Directory of Open Access Journals (Sweden)

    Balakrishna Pillay

    2013-05-01

    Full Text Available Co-contamination of the environment with toxic chlorinated organic and heavy metal pollutants is one of the major problems facing industrialized nations today. Heavy metals may inhibit biodegradation of chlorinated organics by interacting with enzymes directly involved in biodegradation or those involved in general metabolism. Predictions of metal toxicity effects on organic pollutant biodegradation in co-contaminated soil and water environments is difficult since heavy metals may be present in a variety of chemical and physical forms. Recent advances in bioremediation of co-contaminated environments have focussed on the use of metal-resistant bacteria (cell and gene bioaugmentation, treatment amendments, clay minerals and chelating agents to reduce bioavailable heavy metal concentrations. Phytoremediation has also shown promise as an emerging alternative clean-up technology for co-contaminated environments. However, despite various investigations, in both aerobic and anaerobic systems, demonstrating that metal toxicity hampers the biodegradation of the organic component, a paucity of information exists in this area of research. Therefore, in this review, we discuss the problems associated with the degradation of chlorinated organics in co-contaminated environments, owing to metal toxicity and shed light on possible improvement strategies for effective bioremediation of sites co-contaminated with chlorinated organic compounds and heavy metals.

  1. Current Situation of Heavy Metal Pollution in Farmland Soil and Phytoremediation Application

    Institute of Scientific and Technical Information of China (English)

    Yanfei HUANG; Guifen CHEN; Liumei XIONG; Yuyi HUANG

    2016-01-01

    Phytoremediation technology is a newly-developed way of soil heavy metal pollution repair with high efficiency and good ecological comprehensive benefit. This paper briefly introduces the soil heavy metal pollution status at home and abroad,and focuses on the analysis of harm,sources and current situation of soil heavy metal pollution at home and abroad as well as mechanism and application of phytoremediation.Finally it discusses the key problems in phytoremediation technology that need to resolve in the future.

  2. The possible use of soluble humic substances for remediation of heavy metal polluted soils

    DEFF Research Database (Denmark)

    Borggaard, Ole K.; Jensen, Julie Katrine; Holm, Peter Engelund

    2008-01-01

    Polluted soil is a common and serious environmental problem. While reliable methods exist for cleaning soil contaminated by organic compounds through degradation, remediation of heavy metal polluted soils awaits an appropriate solution. This is because heavy metals are nondegradable and generally....... Therefore, the potential of soluble natural humic substances (HS) to extract heavy metals from contaminated soils is tested as an environmental friendly substitute for EDTA. A strongly polluted urban soil and a moderately polluted agricultural soil were extracted at neutral pH in batch mode by three HS...... extraction. Heavy metal extraction with dissolved HS is compared with EDTA at the same concentration and sequential extraction has been performed to identify extracted pools. The results indicate a clear potential of using HS solutions for remediation of heavy metal polluted soils, which is fortunate...

  3. The ratio of clay content to total organic carbon content is a useful parameter to predict adsorption of the herbicide butachlor in soils

    Energy Technology Data Exchange (ETDEWEB)

    Liu Zhongzhen; He Yan [College of Environmental and Natural Resource Sciences, Zhejiang University, Hangzhou 310029 (China); Xu Jianming [College of Environmental and Natural Resource Sciences, Zhejiang University, Hangzhou 310029 (China)], E-mail: jmxu@zju.edu.cn; Huang Panming [Department of Soil Science, University of Saskatchewan, Saskatoon, SK S7N 5A8 (Canada); Jilani Ghulam [College of Environmental and Natural Resource Sciences, Zhejiang University, Hangzhou 310029 (China)

    2008-03-15

    Thirteen soils collected from 11 provinces in eastern China were used to investigate the butachlor adsorption. The results indicated that the total organic carbon (TOC) content, clay content, amorphous Fe{sub 2}O{sub 3} content, silt content, CEC, and pH had a combined effect on the butachlor sorption on soil. Combination of the data obtained from the 13 soils in the present study with other 23 soil samples reported by other researchers in the literature showed that K{sub oc} would be a poor predictive parameter for butachlor adsorption on soils with TOC content higher than 4.0% and lower than 0.2%. The soils with the ratio of clay content to TOC content (RCO) values less than 60 adsorbed butachlor mainly by the partition into soil organic matter matrix. The soils with RCO values higher than 60 apparently adsorbed butachlor by the combination of the partition into soil organic matter matrix and adsorption on clay surface. - The relative importance of organic matter and clay in butachlor adsorption in soil will depend on the ratio of clay content to total organic carbon content.

  4. Soil Contamination with Heavy Metals around Jinja Steel Rolling Mills in Jinja Municipality, Uganda

    Directory of Open Access Journals (Sweden)

    Noel Namuhani

    2015-01-01

    Conclusions. The concentration levels of heavy metals around the steel rolling mills did not appear to be of serious concern, except for copper and cadmium, which showed moderate pollution and moderate to strong pollution, respectively. All heavy metals were within the limits of the United States Environmental Protection Agency (USEPA residential soil standards and the Dutch intervention soil standards. Overall, soils around the Jinja steel rolling mills were slightly polluted with heavy metals, and measures therefore need to be taken to prevent further soil contamination with heavy metals.

  5. The respective effects of soil heavy metal fractions by sequential extraction procedure and soil properties on the accumulation of heavy metals in rice grains and brassicas.

    Science.gov (United States)

    Xiao, Ling; Guan, Dongsheng; Peart, M R; Chen, Yujuan; Li, Qiqi

    2017-01-01

    This study was carried out to examine heavy metal accumulation in rice grains and brassicas and to identify the different controls, such as soil properties and soil heavy metal fractions obtained by the Community Bureau of Reference (BCR) sequential extraction, in their accumulation. In Guangdong Province, South China, rice grain and brassica samples, along with their rhizospheric soil, were collected from fields on the basis of distance downstream from electroplating factories, whose wastewater was used for irrigation. The results showed that long-term irrigation using the electroplating effluent has not only enriched the rhizospheric soil with Cd, Cr, Cu, and Zn but has also increased their mobility and bioavailability. The average concentrations of Cd and Cr in rice grains and brassicas from closest to the electroplating factories were significantly higher than those from the control areas. Results from hybrid redundancy analysis (hRDA) and redundancy analysis (RDA) showed that the BCR fractions of soil heavy metals could explain 29.0 and 46.5 % of total eigenvalue for heavy metal concentrations in rice grains and brassicas, respectively, while soil properties could only explain 11.1 and 33.4 %, respectively. This indicated that heavy metal fractions exerted more control upon their concentrations in rice grains and brassicas than soil properties. In terms of metal interaction, an increase of residual Zn in paddy soil or a decrease of acid soluble Cd in the brassica soil could enhance the accumulation of Cd, Cu, Cr, and Pb in both rice grains and brassicas, respectively, while the reducible or oxidizable Cd in soil could enhance the plants' accumulation of Cr and Pb. The RDA showed an inhibition effect of sand content and CFO on the accumulation of heavy metals in rice grains and brassicas. Moreover, multiple stepwise linear regression could offer prediction for Cd, Cu, Cr, and Zn concentrations in the two crops by soil heavy metal fractions and soil properties.

  6. Complexation with dissolved organic matter and solubility control of heavy metals in a sandy soil.

    Science.gov (United States)

    Weng, Liping; Temminghoff, Erwin J M; Lofts, Stephen; Tipping, Edward; Van Riemsdijk, Willem H

    2002-11-15

    The complexation of heavy metals with dissolved organic matter (DOM) in the environment influences the solubility and mobility of these metals. In this paper, we measured the complexation of Cu, Cd, Zn, Ni, and Pb with DOM in the soil solution at pH 3.7-6.1 using a Donnan membrane technique. The results show that the DOM-complexed species is generally more significant for Cu and Pb than for Cd, Zn, and Ni. The ability of two advanced models for ion binding to humic substances, e.g., model VI and NICA-Donnan, in the simulation of metal binding to natural DOM was assessed by comparing the model predictions with the measurements. Using the default parameters of fulvic and humic acid, the predicted concentrations of free metal ions from the solution speciation calculation using the two models are mostly within 1 order of magnitude difference from the measured concentrations, except for Ni and Pb in a few samples. Furthermore, the solid-solution partitioning of the metals was simulated using a multisurface model, in which metal binding to soil organic matter, dissolved organic matter, clay, and iron hydroxides was accounted for using adsorption and cation exchange models (NICA-Donnan, Donnan, DDL, CD-MUSIC). The model estimation of the dissolved concentration of the metals is mostly within 1 order of magnitude difference from those measured except for Ni in some samples and Pb. The solubility of the metals depends mainly on the metal loading over soil sorbents, pH, and the concentration of inorganic ligands and DOM in the soil solution.

  7. Microbial assimilation of 14C of ground and unground plant materials decomposing in a loamy sand and a clay soil

    DEFF Research Database (Denmark)

    Sørensen, P.; Ladd, J.N.; Amato, M.

    1996-01-01

    . More C-14 and N were mineralized and less microbial biomass C-14 accumulated in soils amended with unground than with ground subclover leaves. Differences in the amounts of (CO2)-C-14 and biomass C-14 were established during the initial 7 days of decomposition. At this time, biomass C-14 in the two...... of particle sizes >50 mu m accounted fro 5-6% input C-14 in the loamy sand; the proportions were little affected by grinding of the clover leaf amendment. In contrast, the amounts of biomass C-14 in the fraction of particle sizes soils. Thus......, the increased amounts of biomass C-14 in soils amended with ground leaves were mainly associated with clay plus silt size particles and microaggregates. After 7 d of decomposition, non-biomass C-14 in the two soil fractions accounted for about 40% of input C-14, irrespective of soil type and particle size...

  8. Accumulation of heavy metals from contaminated soil to plants and evaluation of soil remediation by vermiculite.

    Science.gov (United States)

    Malandrino, Mery; Abollino, Ornella; Buoso, Sandro; Giacomino, Agnese; La Gioia, Carmela; Mentasti, Edoardo

    2011-01-01

    We evaluated the distribution of 15 metal ions, namely Al, Cd, Cu, Cr, Fe, La, Mn, Ni, Pb, Sc, Ti, V, Y, Zn and Zr, in the soil of a contaminated site in Piedmont (Italy). This area was found to be heavily contaminated with Cu, Cr and Ni. The availability of these metal ions was studied using Tessier's sequential extraction procedure: the fraction of mobile species, which potentially is the most harmful for the environment, was much higher than that normally present in unpolluted soils. This soil was hence used to evaluate the effectiveness of treatment with vermiculite to reduce the availability of the pollutants to two plants, Lactuca sativa and Spinacia oleracea, by pot experiments. The results indicated that the addition of vermiculite significantly reduces the uptake of metal pollutants by plants, confirming the possibility of using this clay in amendment treatments of metal-contaminated soils. The effect of plant growth on metal fractionation in soils was investigated. Finally, the sum of the metal percentages extracted into the first two fractions of Tessier's protocol was found to be suitable in predicting the phytoavailability of most of the pollutants present in the investigated soil.

  9. Clay minerals and metal oxides strongly influence the structure of alkane-degrading microbial communities during soil maturation.

    Science.gov (United States)

    Steinbach, Annelie; Schulz, Stefanie; Giebler, Julia; Schulz, Stephan; Pronk, Geertje J; Kögel-Knabner, Ingrid; Harms, Hauke; Wick, Lukas Y; Schloter, Michael

    2015-07-01

    Clay minerals, charcoal and metal oxides are essential parts of the soil matrix and strongly influence the formation of biogeochemical interfaces in soil. We investigated the role of these parental materials for the development of functional microbial guilds using the example of alkane-degrading bacteria harbouring the alkane monooxygenase gene (alkB) in artificial mixtures composed of different minerals and charcoal, sterile manure and a microbial inoculum extracted from an agricultural soil. We followed changes in abundance and community structure of alkane-degrading microbial communities after 3 and 12 months of soil maturation and in response to a subsequent 2-week plant litter addition. During maturation we observed an overall increasing divergence in community composition. The impact of metal oxides on alkane-degrading community structure increased during soil maturation, whereas the charcoal impact decreased from 3 to 12 months. Among the clay minerals illite influenced the community structure of alkB-harbouring bacteria significantly, but not montmorillonite. The litter application induced strong community shifts in soils, maturated for 12 months, towards functional guilds typical for younger maturation stages pointing to a resilience of the alkane-degradation function potentially fostered by an extant 'seed bank'.

  10. Ecological risk assessment on heavy metals in soils: Use of soil diffuse reflectance mid-infrared Fourier-transform spectroscopy

    Science.gov (United States)

    Wang, Cheng; Li, Wei; Guo, Mingxing; Ji, Junfeng

    2017-02-01

    The bioavailability of heavy metals in soil is controlled by their concentrations and soil properties. Diffuse reflectance mid-infrared Fourier-transform spectroscopy (DRIFTS) is capable of detecting specific organic and inorganic bonds in metal complexes and minerals and therefore, has been employed to predict soil composition and heavy metal contents. The present study explored the potential of DRIFTS for estimating soil heavy metal bioavailability. Soil and corresponding wheat grain samples from the Yangtze River Delta region were analyzed by DRIFTS and chemical methods. Statistical regression analyses were conducted to correlate the soil spectral information to the concentrations of Cd, Cr, Cu, Zn, Pb, Ni, Hg and Fe in wheat grains. The principal components in the spectra influencing soil heavy metal bioavailability were identified and used in prediction model construction. The established soil DRIFTS-based prediction models were applied to estimate the heavy metal concentrations in wheat grains in the mid-Yangtze River Delta area. The predicted heavy metal concentrations of wheat grain were highly consistent with the measured levels by chemical analysis, showing a significant correlation (r2 > 0.72) with acceptable root mean square error RMSE. In conclusion, DRIFTS is a promising technique for assessing the bioavailability of soil heavy metals and related ecological risk.

  11. Ecological risk assessment on heavy metals in soils: Use of soil diffuse reflectance mid-infrared Fourier-transform spectroscopy

    Science.gov (United States)

    Wang, Cheng; Li, Wei; Guo, Mingxing; Ji, Junfeng

    2017-01-01

    The bioavailability of heavy metals in soil is controlled by their concentrations and soil properties. Diffuse reflectance mid-infrared Fourier-transform spectroscopy (DRIFTS) is capable of detecting specific organic and inorganic bonds in metal complexes and minerals and therefore, has been employed to predict soil composition and heavy metal contents. The present study explored the potential of DRIFTS for estimating soil heavy metal bioavailability. Soil and corresponding wheat grain samples from the Yangtze River Delta region were analyzed by DRIFTS and chemical methods. Statistical regression analyses were conducted to correlate the soil spectral information to the concentrations of Cd, Cr, Cu, Zn, Pb, Ni, Hg and Fe in wheat grains. The principal components in the spectra influencing soil heavy metal bioavailability were identified and used in prediction model construction. The established soil DRIFTS-based prediction models were applied to estimate the heavy metal concentrations in wheat grains in the mid-Yangtze River Delta area. The predicted heavy metal concentrations of wheat grain were highly consistent with the measured levels by chemical analysis, showing a significant correlation (r2 > 0.72) with acceptable root mean square error RMSE. In conclusion, DRIFTS is a promising technique for assessing the bioavailability of soil heavy metals and related ecological risk. PMID:28198802

  12. Leaching of Nutrient Elements in a Red Soil Derived from Quaternary Red Clay

    Institute of Scientific and Technical Information of China (English)

    SHENRENFANG; ZHAOQIGUO

    1998-01-01

    A red soil derived from Quaternary red clay was employed to study nutrient leaching with woil columns repacked in laboratory,The objective was to identify the effects of fertilization practices on leaching patterns and magnitudes of Ca2+,Mg2+,K+,NH4+,and NO3-,The treatments were CK (as a control),CaCO3, CaSO4,MgCO3,Ca(H2PO4)2,urea,KCl,and multiple (a mixture of the above-mentioned fertilizers),The fertilizers were added to the bare surface of the soil columns,and then the columns were leached with 120 mL deionized water daily through peristaltic pumps over a period of 92 days.Leaching processes of NH4+,and NO3- wer e only measured in CK,ured,and multiple treatments which were directly related to N leaching, Results showed that sole application of CaSO4,and Ca(H2PO4)2 scarcely hd any effect on the leching losses of Ca2+,Mg2+,and K+; the application of MgCO3 sthimulated the leaching of Mg2+;the application of CaCO3 promoted the leaching of Ca2+,Mg2+ and K+; urea treatment also promoted the leaching of K+ and NH4+,and NO3- leaching mainly occurred at late stage of leaching process in particular;under KCl treatment,leaching of Ca2+,Mg2+,and K+ was promoted to a large extent;under multiple treatment, leaching of Ca2+,Mg2+,K+,NH4+,and NO3- was all increased and NO3- was mainly leached at the end of leaching process and still had a trend of increase.

  13. The Chemophytostabilisation Process of Heavy Metal Polluted Soil.

    Science.gov (United States)

    Grobelak, Anna; Napora, Anna

    2015-01-01

    Industrial areas are characterised by soil degradation processes that are related primarily to the deposition of heavy metals. Areas contaminated with metals are a serious source of risk due to secondary pollutant emissions and metal leaching and migration in the soil profile and into the groundwater. Consequently, the optimal solution for these areas is to apply methods of remediation that create conditions for the restoration of plant cover and ensure the protection of groundwater against pollution. Remediation activities that are applied to large-scale areas contaminated with heavy metals should mainly focus on decreasing the degree of metal mobility in the soil profile and metal bioavailability to levels that are not phytotoxic. Chemophytostabilisation is a process in which soil amendments and plants are used to immobilise metals. The main objective of this research was to investigate the effects of different doses of organic amendments (after aerobic sewage sludge digestion in the food industry) and inorganic amendments (lime, superphosphate, and potassium phosphate) on changes in the metals fractions in soils contaminated with Cd, Pb and Zn during phytostabilisation. In this study, the contaminated soil was amended with sewage sludge and inorganic amendments and seeded with grass (tall fescue) to increase the degree of immobilisation of the studied metals. The contaminated soil was collected from the area surrounding a zinc smelter in the Silesia region of Poland (pH 5.5, Cd 12 mg kg-1, Pb 1100 mg kg-1, Zn 700 mg kg-1). A plant growth experiment was conducted in a growth chamber for 5 months. Before and after plant growth, soil subsamples were subjected to chemical and physical analyses. To determine the fractions of the elements, a sequential extraction method was used according to Zeien and Brümmer. Research confirmed that the most important impacts on the Zn, Cd and Pb fractions included the combined application of sewage sludge from the food industry and

  14. The Chemophytostabilisation Process of Heavy Metal Polluted Soil.

    Directory of Open Access Journals (Sweden)

    Anna Grobelak

    Full Text Available Industrial areas are characterised by soil degradation processes that are related primarily to the deposition of heavy metals. Areas contaminated with metals are a serious source of risk due to secondary pollutant emissions and metal leaching and migration in the soil profile and into the groundwater. Consequently, the optimal solution for these areas is to apply methods of remediation that create conditions for the restoration of plant cover and ensure the protection of groundwater against pollution. Remediation activities that are applied to large-scale areas contaminated with heavy metals should mainly focus on decreasing the degree of metal mobility in the soil profile and metal bioavailability to levels that are not phytotoxic. Chemophytostabilisation is a process in which soil amendments and plants are used to immobilise metals. The main objective of this research was to investigate the effects of different doses of organic amendments (after aerobic sewage sludge digestion in the food industry and inorganic amendments (lime, superphosphate, and potassium phosphate on changes in the metals fractions in soils contaminated with Cd, Pb and Zn during phytostabilisation. In this study, the contaminated soil was amended with sewage sludge and inorganic amendments and seeded with grass (tall fescue to increase the degree of immobilisation of the studied metals. The contaminated soil was collected from the area surrounding a zinc smelter in the Silesia region of Poland (pH 5.5, Cd 12 mg kg-1, Pb 1100 mg kg-1, Zn 700 mg kg-1. A plant growth experiment was conducted in a growth chamber for 5 months. Before and after plant growth, soil subsamples were subjected to chemical and physical analyses. To determine the fractions of the elements, a sequential extraction method was used according to Zeien and Brümmer. Research confirmed that the most important impacts on the Zn, Cd and Pb fractions included the combined application of sewage sludge from the

  15. The effect of motor vehicle emission towards lead (Pb content of rice field soil with different clay content

    Directory of Open Access Journals (Sweden)

    C.C.Wati

    2015-10-01

    Full Text Available Motor vehicle gas emission contains lead (Pb which is a hazardous and toxic substance. Agricultural land, especially rice field, which is located nearby roads passed by many motor vehicle, are susceptible to the accumulation of Pb. If Pb is permeated by plants cultivated in the rice field, it will be very hazardous for humans as they are the final consumers. Hence, it is essential to identify Pb content of rice-field soil initiated by motor vehicle gas emission. This study was aimed to identify the effects of motor vehicle density, the distance between rice-field and road, and the clay content of soil towards Pb content of soils in Blitar and Ngawi Regencies of East Java. The method used for the study was survey method managed by using three-factor nested design with three replicates. The results of this study showed that motor vehicle density and the distance of rice field to road provide significant affected the total of Pb content of soil. However, the dissemination pattern of Pb in the soil was irregular due to the factors of climate and environment. Before Pb reached soil surface, Pb was spread out in the air due to the effect of temperature, wind velocity, vehicle velocity, size of vehicle, and road density. Consequently, the location with low motor vehicle density and positioned faraway to the road had higher total rate of Pb than the location with high motor vehicle density and positioned nearby the road. Clay content affected the total rate of Pb content as much as 37%, every 1% increase of clay content increased the total rate of Pb as much as 0.08 mg/kg.

  16. Space-time quantitative source apportionment of soil heavy metal concentration increments.

    Science.gov (United States)

    Yang, Yong; Christakos, George; Guo, Mingwu; Xiao, Lu; Huang, Wei

    2017-04-01

    Assessing the space-time trends and detecting the sources of heavy metal accumulation in soils have important consequences in the prevention and treatment of soil heavy metal pollution. In this study, we collected soil samples in the eastern part of the Qingshan district, Wuhan city, Hubei Province, China, during the period 2010-2014. The Cd, Cu, Pb and Zn concentrations in soils exhibited a significant accumulation during 2010-2014. The spatiotemporal Kriging technique, based on a quantitative characterization of soil heavy metal concentration variations in terms of non-separable variogram models, was employed to estimate the spatiotemporal soil heavy metal distribution in the study region. Our findings showed that the Cd, Cu, and Zn concentrations have an obvious incremental tendency from the southwestern to the central part of the study region. However, the Pb concentrations exhibited an obvious tendency from the northern part to the central part of the region. Then, spatial overlay analysis was used to obtain absolute and relative concentration increments of adjacent 1- or 5-year periods during 2010-2014. The spatial distribution of soil heavy metal concentration increments showed that the larger increments occurred in the center of the study region. Lastly, the principal component analysis combined with the multiple linear regression method were employed to quantify the source apportionment of the soil heavy metal concentration increments in the region. Our results led to the conclusion that the sources of soil heavy metal concentration increments should be ascribed to industry, agriculture and traffic. In particular, 82.5% of soil heavy metal concentration increment during 2010-2014 was ascribed to industrial/agricultural activities sources. Using STK and SOA to obtain the spatial distribution of heavy metal concentration increments in soils. Using PCA-MLR to quantify the source apportionment of soil heavy metal concentration increments.

  17. Heavy metal accumulation in soils, plants, and hair samples: an assessment of heavy metal exposure risks from the consumption of vegetables grown on soils previously irrigated with wastewater.

    Science.gov (United States)

    Massaquoi, Lamin Daddy; Ma, Hui; Liu, Xue Hui; Han, Peng Yu; Zuo, Shu-Mei; Hua, Zhong-Xian; Liu, Dian-Wu

    2015-12-01

    It is common knowledge that soils irrigated with wastewater accumulate heavy metals more than those irrigated with cleaner water sources. However, little is known on metal concentrations in soils and cultivars after the cessation of wastewater use. This study assessed the accumulation and health risk of heavy metals 3 years post-wastewater irrigation in soils, vegetables, and farmers' hair. Soils, vegetables, and hair samples were collected from villages previously irrigating with wastewater (experimental villages) and villages with no history of wastewater irrigation (control villages). Soil samples were digested in a mixture of HCL/HNO3/HCLO4/HF. Plants and hair samples were digested in HNO3/HCLO4 mixture. Inductive coupled plasma-optical emission spectrometer (ICP-OES) was used to determine metal concentrations of digested extracts. Study results indicate a persistence of heavy metal concentration in soils and plants from farms previously irrigated with wastewater. In addition, soils previously irrigated with wastewater were severely contaminated with cadmium. Hair metal concentrations of farmers previously irrigating with wastewater were significantly higher (P hair samples of farmers previously irrigating with wastewater were not associated with current soil metal concentrations. The study concludes that there is a persistence of heavy metals in soils and plants previously irrigated with wastewater, but high metal concentrations in hair samples of farmers cannot be associated with current soil metal concentrations.

  18. Clay mineralogy of soils located on islands in the upper Paraná River, PR/MS

    Directory of Open Access Journals (Sweden)

    Paulo Henrique Marques de Castro

    2014-10-01

    Full Text Available The Mutum and Porto Rico islands are part of the archipelago Mutum-Porto Rico, located in the upper Paraná River between the cities Porto Rico, PR and Taquaruçu, MS. The soils are formed by constituents inherited from parent materials, organic compounds, and various minerals with varying degrees of complexity and stages of weathering. Among the constituents inherited of the parent materials, the most active are called clay minerals, derived from the weathering or transformation of primary minerals. The clay minerals has a key role in behavior morphological, chemical, physical and hydraulic of soil. They comprise a large family of minerals that can be classified into several groups according to their crystalline structure, like the kaolinites, smectite and ilitas. The aim of this study was to conduct mineralogical analyzes by X-ray in eight soils from the Mutum and Porto Rico islands. The mineralogical data were generated from the Panalytical X-ray diffractometer and X’pert Highscore Plus software. The results show that all soils showed a pattern of peaks comprising illite, kaolinite and gibbsite. Some soils also had characteristic peaks of iron oxyhydroxide.

  19. Analytical techniques for estimation of heavy metals in soil ecosystem: a tabulated review.

    Science.gov (United States)

    Soodan, Rajneet Kour; Pakade, Yogesh B; Nagpal, Avinash; Katnoria, Jatinder Kaur

    2014-07-01

    Soil, an important environmental medium, is exposed to a number of pollutants including toxic heavy metals by various natural and anthropogenic activities. Consequently heavy metal contaminated soil has the potential to pose severe health risks and hazards to humans as well as other living creatures of the ecosystem through various routes of exposure such as direct ingestion, contaminated drinking ground water, food crops, contact with contaminated soil and through food chain. Therefore, it is mandatory to explore various techniques that could efficiently determine the occurrence of heavy metals in soil. A number of methods have been developed by several regulatory agencies and private laboratories and are applied routinely for the quantification and monitoring of soil matrices. The present review is an initiative to summarize the work on pollution levels of soil ecosystem and thus pertains to various extraction and quantification procedures used worldwide to analyze heavy metals in soil. Copyright © 2014 Elsevier B.V. All rights reserved.

  20. Spatial and Seasonal Variations of Heavy Metals in Wetland Soils of the Tidal Flats in the Yangtze Estuary, China:Environmental Implications

    Institute of Scientific and Technical Information of China (English)

    HU Xue-Feng; DU Yan; FENG Jian-Wei; FANG Sheng-Qiong; GAO Xiao-Jiang; XU Shi-Yuan

    2013-01-01

    The environment of estuarine wetlands has been attracting worldwide attention.To study the spatial distribution of pollutants in the tidal flats of the Yangtze Estuary,Southeast China,the Eastern Tidal Flat of Chongming Island (EC) and the Jiuduansha Shoal (JS) of the estuary were selected as the study sites.At each of the two sites,a cross-transect from land to sea was established and topsoil and soil core samples in the cross-transect were collected spatially and seasonally to determine their contents of heavy metals (Cu,Zn,Pb,Cd,Cr,Ni,Mn,and Fe) and grain-size characteristics.The results showed that the heavy metal loads were commonly higher in the soils of nearshore high tidal fiats and had a tendency of decreasing from land to sea at both of the study sites.The contents of heavy metals in the soils of the high and medial tidal fiats were mostly higher in April and November but lower in July.Corresponding spatial and seasonal variations in grain size of the intertidal soils were also observed at the two study sites.The soils in the nearshore high tidal fiats were finer and gradually got coarser seawards; they were relatively finer in April and November but coarser in July.Furthermore,the contents of heavy metals in the intertidal soils of both the sites EC and JS were significantly positively correlated with the clay (< 2 μm) and 2-20 μm fractions,but negatively with the sand (> 63 μm) and 20-63 μm fractions,which suggested that the heavy metals in the intertidal soils were primarily combined with the fine particulate fraction (< 20 μm),especially clay,and hence the spatial and seasonal variations in heavy metals were actually caused by the change of the grain-size characteristics of the intertidal soils due to the different sedimentary environments in the estuary.The results of this study may also contribute to a better understanding of the soil formation and classification in the tidal fiats of the Yangtze Estuary.

  1. Spatial Distribution of Heavy Metals and the Environmental Quality of Soil in the Northern Plateau of Spain by Geostatistical Methods

    Science.gov (United States)

    Santos-Francés, Fernando; Martínez-Graña, Antonio; Ávila Zarza, Carmelo; García Sánchez, Antonio; Alonso Rojo, Pilar

    2017-01-01

    , cartography of the spatial distribution of the heavy metal contents in the soil of the Northern Plateau of Spain was generated using Kriging interpolation methods. Furthermore, the total heavy metal contents in three soil orders present in the area, namely Entisols, Inceptisols, and Alfisols, were analyzed. Other soil parameters, such as the organic matter content, pH, clay content and cation exchange capacity, was measured to determine their influence on and correlation with the heavy metal contents. PMID:28587142

  2. Analysis of heavy metal sources in soil using kriging interpolation on principal components.

    Science.gov (United States)

    Ha, Hoehun; Olson, James R; Bian, Ling; Rogerson, Peter A

    2014-05-06

    Anniston, Alabama has a long history of operation of foundries and other heavy industry. We assessed the extent of heavy metal contamination in soils by determining the concentrations of 11 heavy metals (Pb, As, Cd, Cr, Co, Cu, Mn, Hg, Ni, V, and Zn) based on 2046 soil samples collected from 595 industrial and residential sites. Principal Component Analysis (PCA) was adopted to characterize the distribution of heavy metals in soil in this region. In addition, a geostatistical technique (kriging) was used to create regional distribution maps for the interpolation of nonpoint sources of heavy metal contamination using geographical information system (GIS) techniques. There were significant differences found between sampling zones in the concentrations of heavy metals, with the exception of the levels of Ni. Three main components explaining the heavy metal variability in soils were identified. The results suggest that Pb, Cd, Cu, and Zn were associated with anthropogenic activities, such as the operations of some foundries and major railroads, which released these heavy metals, whereas the presence of Co, Mn, and V were controlled by natural sources, such as soil texture, pedogenesis, and soil hydrology. In general terms, the soil levels of heavy metals analyzed in this study were higher than those reported in previous studies in other industrial and residential communities.

  3. Heavy Metal Soil Content as an Indicator of Pollution

    Directory of Open Access Journals (Sweden)

    Ana-Maria Rusu

    2000-04-01

    Full Text Available Two soil sample series were collected from 7 contaminated sites situated along a transect from the pollutant source, Zlatna copper ore-processing plant, and analyzed using different analytical methods. The soils collected in 1998 were analyzed by inductively coupled plasma-atomic emission spectrometry (ICP-AES after extraction with DTPA for trace metals and those collected in 1999 were analyzed with flame atomic absorption spectrometry (FAAS following two acid digestion procedures. The DTPA extraction procedure produced lower results than the acid digestions. Also, the pH values for all samples was measured and the results obtained during autumn compared with those in spring after a long winter with heavy snow falls. The correlation between Cu, Pb, Zn (for samples collected in May 1999 and pH was investigated. The pattern of chemical abundance of contaminants (Cu, Pb, Zn, Fe, Cd and Ni was determined in soil at 0-50 cm depth. This study indicates that Pb is the most polluting element up to 25 km downwind from Zlatna town.

  4. Interaction of heavy metals and pyrene on their fates in soil and tall fescue (Festuca arundinacea).

    Science.gov (United States)

    Lu, Mang; Zhang, Zhong-Zhi; Wang, Jing-Xiu; Zhang, Min; Xu, Yu-Xin; Wu, Xue-Jiao

    2014-01-21

    90-Day growth chamber experiments were performed to investigate the interactive effect of pyrene and heavy metals (Cu, Cd, and Pb) on the growth of tall fescue and its uptake, accumulation, and dissipation of heavy metals and pyrene. Results show that plant growth and phytomass production were impacted by the interaction of heavy metals and pyrene. They were significantly decreased with heavy metal additions (100-2000 mg/kg), but they were only slightly declined with pyrene spiked up to 100 mg/kg. The addition of a moderate dosage of pyrene (100 mg/kg) lessened heavy metal toxicity to plants, resulting in enhanced plant growth and increased metal accumulation in plant tissues, thus improving heavy metal removal by plants. In contrast, heavy metals always reduced both plant growth and pyrene dissipation in soils. The chemical forms of Cu, Cd, and Pb in plant organs varied with metal species and pyrene addition. The dissipation and mineralization of pyrene tended to decline in both planted soil and unplanted soils with the presence of heavy metals, whereas they were enhanced with planting. The results demonstrate the complex interactive effects of organic pollutants and heavy metals on phytoremediation in soils. It can be concluded that, to a certain extent, tall fescue may be useful for phytoremediation of pyrene-heavy metal-contaminated sites. Further work is needed to enhance methods for phytoremediation of heavy metal-organics co-contaminated soil.

  5. Microorganisms in heavy metal bioremediation: strategies for applying microbial-community engineering to remediate soils

    Directory of Open Access Journals (Sweden)

    Jennifer L. Wood

    2016-06-01

    Full Text Available The remediation of heavy-metal-contaminated soils is essential as heavy metals persist and do not degrade in the environment. Remediating heavy-metal-contaminated soils requires metals to be mobilized for extraction whilst, at the same time, employing strategies to avoid mobilized metals leaching into ground-water or aquatic systems. Phytoextraction is a bioremediation strategy that extracts heavy metals from soils by sequestration in plant tissues and is currently the predominant bioremediation strategy investigated for remediating heavy-metal-contaminated soils. Although the efficiency of phytoextraction remains a limiting feature of the technology, there are numerous reports that soil microorganisms can improve rates of heavy metal extraction.This review highlights the unique challenges faced when remediating heavy-metal-contaminated soils as compared to static aquatic systems and suggests new strategies for using microorganisms to improve phytoextraction. We compare how microorganisms are used in soil bioremediation (i.e. phytoextraction and water bioremediation processes, discussing how the engineering of microbial communities, used in water remediation, could be applied to phytoextraction. We briefly outline possible approaches for the engineering of soil communities to improve phytoextraction either by mobilizing metals in the rhizosphere of the plant or by promoting plant growth to increase the root-surface area available for uptake of heavy metals. We highlight the technological advances that make this research direction possible and how these technologies could be employed in future research.

  6. HEAVY METALS IN PRODUCTIVE PARTS OF AGRICULTURAL PLANTS

    Directory of Open Access Journals (Sweden)

    Július Árvay

    2012-02-01

    Full Text Available The contents of heavy metals in plants were not in relation to contents of heavy metals in soil. Increased content of heavy metals in soils was not in consistency with content in plants. Usually content of heavy metals in plants according to our results were lower than their content in soil. Only the over limit contents of copper and cadmium were assessed in grain of barley and oat. The results of heavy metals content showed that dominant part on content of elements in plants have their mobile forms what depends on pH, content of organic matter in soil and portion of clay parts.

  7. Determination of heavy metals in soil and different parts of Diplazium esculentum (medicinal fern)

    Science.gov (United States)

    Jasim, Hind S.; Idris, Mushrifah; Abdullah, Aminah; Kadhum, A. A. H.

    2014-09-01

    Diplazium esculentum is a widely used medicinal fern in Malaysia and other regions worldwide. Heavy metals in plants should be determined because prolonged human intake of toxic trace elements, even at low doses, results in organ malfunction and causes chronic toxicity. Hence, substantial information should be obtained from plants that grow on soils containing high concentrations of heavy metals. This study aimed to determine the physicochemical characteristics of soil and heavy metal concentrations (Pb, Cr, Mn, Cu, and Zn) in different parts of D. esculentum and soil, which were collected from the fern garden of Universiti Kebangsaan Malaysia. Results showed that heavy metals were highly accumulated in D. esculentum roots.

  8. [Investigation and analysis of heavy metal pollution related to soil-Panax notoginseng system].

    Science.gov (United States)

    Chen, Lu; Mi, Yan-Hua; Lin, Xin; Liu, Da-Hui; Zeng, Min; Chen, Xiao-Yan

    2014-07-01

    In this study, five heavy metals contamination of soil and different parts of Panax notoginseng in the plantation area was investigated. Analysis of heavy metals correlation between the planting soil and P. notoginseng; and the absorption and accumulation characteristics and translocation of soil heavy metals by P. notoginseng plants was revealed. Through field investigation and laboratory analytical methods, analysis of China's 30 different soil P. notoginseng origin and content of heavy metals in five different parts of the P. notoginseng plant content of heavy metals. The results revealed that the soil heavy metals should not be neglected in the plantation area Referring to the national soil quality standards (GB15608-1995), the excessive degree of soil heavy metals pollution showed Hg > As > Cd > Cr in the plantation area, and Pb content of soil was in the scope of the standard. Refer to 'Green Industry Standards for Import and Export of Medical Plants and Preparations', the excessive degree of heavy metals content of P. notoginseng plants showed As > Pb > Cr > Cd, and Hg content of plants was in the scope of the standard. Concentrations of five heavy metals of underground parts of P. notoginseng plants are higher than aboveground, and heavy metals elements are more concentrated in the root, followed by the rhizome of P. notoginseng plants. Heavy metal accumulation characteristics of the different parts of the P. notoginseng of the overall performance is the root > the rhizome > the root tuber > leaves > stems. From the point of view BCF value analysis of various parts of the P. notoginseng plants to absorb heavy metals in soil, BCF values of all samples were less than 1, description P. notoginseng not belong Hyperaccumulator. From the view of transportation and related analysis of the soil-P. notoginseng systems, the rhizome of P. notoginseng and the content of As and Cr in soil was significantly correlated, the root of P. notoginseng and the content of Cd in

  9. {sup 222}Rn and CO{sub 2} soil-gas geochemical characterization of thermally altered clays at Orciatico (Tuscany, Central Italy)

    Energy Technology Data Exchange (ETDEWEB)

    Voltattorni, N., E-mail: nunzia.voltattorni@ingv.it [Istituto Nazionale di Geofisica e Vulcanologia, Via di Vigna Murata 605, 00143 Rome (Italy); Lombardi, S. [Earth Science Department, University ' La Sapienza' , Piazzale A. Moro 5, 00185 Rome (Italy); Rizzo, S. [Via Tito, 1/A, 00061 Anguillara Sabazia, Rome (Italy)

    2010-08-15

    Research highlights: {yields} Soil-gas technique is applied to study gas permeability of Orciatico clay units. {yields} Clay permeability depends on thermal and mechanical alteration degree. {yields} Soil-gas distributions are due to shallow fracturing of clays. {yields} Rn and CO{sub 2} soil-gas anomalies highlight secondary permeability in clay sequence. {yields} Soil-gas results are supported by detailed geoelectrical surveys. - Abstract: The physical properties of clay allow argillaceous formations to be considered geological barriers to radionuclide migration in high-level radioactive-waste isolation systems. As laboratory simulations are short term and numerical models always involve assumptions and simplifications of the natural system, natural analogues are extremely attractive surrogates for the study of long-term isolation. The clays of the Orciatico area (Tuscany, Central Italy), which were thermally altered via the intrusion of an alkali-trachyte laccolith, represent an interesting natural model of a heat source which acted on argillaceous materials. The study of this natural analogue was performed through detailed geoelectrical and soil-gas surveys to define both the geometry of the intrusive body and the gas permeability of a clay unit characterized by different degrees of thermal alteration. The results of this study show that gas permeability is increased in the clay sequences subjected to greater heat input from the emplacement of the Orciatico intrusion, despite the lack of apparent mineral and geotechnical variations. These results, which take into consideration long time periods in a natural, large-scale geological system, may have important implications for the long-term safety of underground storage of nuclear waste in clay formations.

  10. Fractionation behavior of heavy metals in soil during bioleaching with Acidithiobacillus thiooxidans.

    Science.gov (United States)

    Naresh Kumar, R; Nagendran, R

    2009-09-30

    The effects of bioleaching on the fractionation of soil heavy metals were investigated in this study. Bioleaching of heavy metals from contaminated soil was carried out in shake flask experiments. Acidophilic sulfur oxidizing bacteria Acidithiobacillus thiooxidans isolated from soil was used for bioleaching. Bioleaching resulted in removal of heavy metals at higher levels. Variations in the binding forms of heavy metals before, during and after bioleaching were evaluated. It was noticed that bioleaching affected the binding forms of all the heavy metals present in the soil. The major contaminant chromium bound mainly to the fractions of soil which are not very reactive (organic and residual fractions) also showed good removal efficiency. Bioleaching influenced the fractionation of metals in soil after treatment and most of the remnant heavy metals were bound either to residual fraction or to other not easily mobile fractions of soil. The results of this study indicated that the bioleaching process can be useful for efficient removal of heavy metals from soil. Further, the soil with remnant metals can be disposed off safely.

  11. Influence of tebuconazole and copper hydroxide on phosphatase and urease activities in red sandy loam and black clay soils.

    Science.gov (United States)

    Anuradha, B; Rekhapadmini, A; Rangaswamy, V

    2016-06-01

    The efficacy of two selected fungicides i.e., tebuconazole and coppoer hydroxide, was conducted experiments in laboratory and copper hydroxide on the two specific enzymes phosphatase and urease were determined in two different soil samples (red sandy loam and black clay soils) of groundnut (Arachis hypogaea L.) from cultivated fields of Anantapuramu District, Andhra Pradesh. The activities of the selected soil enzymes were determined by incubating the selected fungicides-treated (1.0, 2.5, 5.0, 7.5 and 10.0 kg ha(-1)) and -untreated groundnut soil samples at 10 day intervals. By determining the effective concentration, the rate of selected enzyme activity was estimated by adding the suitable substrate at 10, 20, 30 and 40 days of soil incubation. Both the enzyme activities were increased up to 5.0 kg ha(-1) level of fungicide in both soil samples significantly at 10 days of soil incubation and further enhanced up to 20 days of incubation. The activity of the phosphatase and urease decreased progressively at 30 and 40 days of incubation. From overall studies, higher concentrations (7.5 and 10.0 kg ha(-1)) of both tebuconazole and copper hydroxide were toxic to phosphatase and urease activities, respectively, in both soil samples.

  12. Application of portable XRF and VNIR sensors for rapid assessment of soil heavy metal pollution

    Science.gov (United States)

    Hu, Bifeng; Chen, Songchao; Hu, Jie; Xia, Fang; Xu, Junfeng; Li, Yan; Shi, Zhou

    2017-01-01

    Rapid heavy metal soil surveys at large scale with high sampling density could not be conducted with traditional laboratory physical and chemical analyses because of the high cost, low efficiency and heavy workload involved. This study explored a rapid approach to assess heavy metals contamination in 301 farmland soils from Fuyang in Zhejiang Province, in the southern Yangtze River Delta, China, using portable proximal soil sensors. Portable X-ray fluorescence spectroscopy (PXRF) was used to determine soil heavy metals total concentrations while soil pH was predicted by portable visible-near infrared spectroscopy (PVNIR). Zn, Cu and Pb were successfully predicted by PXRF (R2 >0.90 and RPD >2.50) while As and Ni were predicted with less accuracy (R2 heavy metal pollution. PMID:28234944

  13. Can mud (silt and clay) concentration be used to predict soil organic carbon content within seagrass ecosystems?

    KAUST Repository

    Serrano, O.

    2016-01-18

    The emerging field of blue carbon science is seeking cost-effective ways to estimate the organic carbon content of soils that are bound by coastal vegetated ecosystems. Organic carbon (Corg) content in terrestrial soils and marine sediments has been correlated with mud content (i.e. silt and clay), however, empirical tests of this theory are lacking for coastal vegetated ecosystems. Here, we compiled data (n = 1345) on the relationship between Corg and mud (i.e. silt and clay, particle sizes <63 μm) contents in seagrass ecosystems (79 cores) and adjacent bare sediments (21 cores) to address whether mud can be used to predict soil Corg content. We also combined these data with the δ13C signatures of the soil Corg to understand the sources of Corg stores. The results showed that mud is positively correlated with soil Corg content only when the contribution of seagrass-derived Corg to the sedimentary Corg pool is relatively low, such as in small and fast growing meadows of the genera Zostera, Halodule and Halophila, and in bare sediments adjacent to seagrass ecosystems. In large and long-living seagrass meadows of the genera Posidonia and Amphibolis there was a lack of, or poor relationship between mud and soil Corg content, related to a higher contribution of seagrass-derived Corg to the sedimentary Corg pool in these meadows. The relative high soil Corg contents with relatively low mud contents (i.e. mud-Corg saturation) together with significant allochthonous inputs of terrestrial organic matter could overall disrupt the correlation expected between soil Corg and mud contents. This study shows that mud (i.e. silt and clay content) is not a universal proxy for blue carbon content in seagrass ecosystems, and therefore should not be applied generally across all seagrass

  14. Chemodynamics of heavy metals in long-term contaminated soils: metal speciation in soil solution.

    Science.gov (United States)

    Kim, Kwon-Rae; Owens, Gary

    2009-01-01

    The concentration and speciation of heavy metals in soil solution isolated from long-term contaminated soils were investigated. The soil solution was extracted at 70% maximum water holding capacity (MWHC) after equilibration for 24 h. The free metal concentrations (Cd2+, CU2+, Pb2+, and Zn2+) in soil solution were determined using the Donnan membrane technique (DMT). Initially the DMT was validated using artificial solutions where the percentage of free metal ions were significantly correlated with the percentages predicted using MINTEQA2. However, there was a significant difference between the absolute free ion concentrations predicted by MINTEQA2 and the values determined by the DMT. This was due to the significant metal adsorption onto the cation exchange membrane used in the DMT with 20%, 28%, 44%, and 8% mass loss of the initial total concentration of Cd, Cu, Pb, and Zn in solution, respectively. This could result in a significant error in the determination of free metal ions when using DMT if no allowance for membrane cation adsorption was made. Relative to the total soluble metal concentrations the amounts of free Cd2+ (3%-52%) and Zn2+ (11%-72%) in soil solutions were generally higher than those of Cu2+ (0.2%-30%) and Pb2+ (0.6%-10%). Among the key soil solution properties, dissolved heavy metal concentrations were the most significant factor governing free metal ion concentrations. Soil solution pH showed only a weak relationship with free metal ion partitioning coefficients (K(p)) and dissolved organic carbon did not show any significant influence on K(p).

  15. Chemodynamics of heavy metals in long-term contaminated soils: Metal speciation in soil solution

    Institute of Scientific and Technical Information of China (English)

    Kwon-Rae Kim; Gary Owens

    2009-01-01

    The concentration and speciation of heavy metals in soil solution isolated from long-term contaminated soils were investigated.The soil solution was extracted at 70% maximum water holding capacity (MWHC) after equilibration for 24 h.The free metal concentrations (Cd~(2+),Cu~(2+),Pb~(2+),and Zn~(2+)) in soil solution were determined using the Donnan membrane technique (DMT).Initially the DMT was validated using artificial solutions where the percentage of free metal ions were significantly correlated with the percentages predicted using MINTEQA2.However,there was a significant difference between the absolute free ion concentrations predicted by MINTEQA2 and the values determined by the DMT.This was due to significant metal adsorption onto the cation exchange membrane used in the DMT with 20%,28%,44%,and 8% mass loss of the initial total concentration of Cd,Cu,Pb,and Zn in solution,respectively.This could result in a significant error in the determination of free metal ions when using DMT if no allowance for membrane cation adsorption was made.Relative to the total soluble metal concentrations the amounts of free Cd~(2+) (3%-52%) and Zn~(2+) (11%-72%) in soil solutions were generally higher than those of Cu~(2+) (0.2%-30%) and Pb~(2+) (0.6%-10%).Among the key soil solution properties,dissolved heavy metal concentrations were the most significant factor governing free metal ion concentrations.Soil solution pH showed only a weak relationship with free metal ion partitioning coefficients (K_p) and DOC did not show any significant influence on K_p.

  16. Increased Soil Heavy Metal Concentrations Aff ect the Structure of Soil Fungus Community

    Directory of Open Access Journals (Sweden)

    Vaidilutė Dirginčiutė-Volodkienė

    2011-03-01

    Full Text Available Effects of heavy metals on soil fungi populations and soil fertility incidental to it were studied under laboratory conditions. Metal-amended antroposol type soil samples were incubated for a month at 17°C under natural light regime. Copper, zinc and lead were chosen as the most common industrial pollutants. Each metal was applied either of sulfate, chloride or acetate salt (at concentration varying from 0.4 to 16.14 g kg-1 soil; control – soil without metal amendment. Fungal populations (dilution plate method were investigated and soil phytotoxicity test was performed.Elevated Cu, Zn and Pb concentrations in the soil influenced fungus community structure. Some species (Absidia glauca, Acremonium kiliense, Aspergillus fumigatus, and Alternaria alternata detected in the control soil community were eliminated, while the abundance of the other species increased. Paecillomyces genus dominated in the soil amended with either of Cu or Zn. P. farinosus, P. fumosoroseum and fungal species from the Clonostachys, Penicillium and Lecanicillium genera were Znresistant. P. lilacinus and plant pathogenic fungi, A. alternata, Fusarium oxysporum, F. solani and Phoma lingam were very abundant in soil amended with Cu salts, followed by some saprotrophic fungi such as Cunninghamella echinulata and Mucor hiemalis f. hiemalis. An overall change in the plant (cress, Lepidum sativum; wheat, Ticicum aestivum; lupine, Lupinus polyphyllus, and sunflower, Heliannthus annus seed viability was observed in comparison with control. Most deleterious effects on the seed germination were observed in case of zinc, medium – in case of copper, and the least – in case of lead. Zinc salts at used concentrations were unfavorable to both fungus populations and consequently to the seed viability.

  17. Diversity of arbuscular mycorrhizal fungus populations in heavy-metal-contaminated soils

    Energy Technology Data Exchange (ETDEWEB)

    Del Val, C.; Barea, J.M.; Azcon-Aguilar, C. [CSIC, Granada (Spain)

    1999-02-01

    High concentrations of heavy metals have been shown to adversely affect the size, diversity, and activity of microbial populations in soil. The aim of this work was to determine how the diversity of arbuscular mycorrhizal (AM) fungi is affected by the addition of sewage-amended sludge containing heavy metals in a long-term experiment. Due to the reduced number of indigenous AM fungal (AMF) propagules in the experimental soils, several host plants with different life cycles were used to multiply indigenous fungi. Six AMF ecotypes were found in the experimental soils, showing consistent differences with regard to their tolerance to the presence of heavy metals. AMF ecotypes ranged from very sensitive to the presence of metals to relatively tolerant to high rates of heavy metals in soil. Total AMF spore numbers decreased with increasing amounts of heavy metals in the soil. However, species richness and diversity as measured by the Shannon-Wiener index increased in soils receiving intermediate rates of sludge contamination but decreased in soils receiving the highest rate of heavy-metal-contaminated sludge. Relative densities of most AMF species were also significantly influenced by soil treatments. Host plant species exerted a selective influence on AMF population size and diversity. The authors conclude based on the results of this study that size and diversity of AMF populations were modified in metal-polluted soils, even in those with metal concentrations that were below the upper limits accepted by the European Union for agricultural soils.

  18. [Heavy metal pollution characteristics and ecological risk analysis for soil around Haining electroplating industrial park].

    Science.gov (United States)

    Li, Jiong-Hui; Weng, Shan; Fang, Jing; Huang, Jia-Lei; Lu, Fang-Hua; Lu, Yu-Hao; Zhang, Hong-Ming

    2014-04-01

    The pollution status and potential ecological risks of heavy metal in soils around Haining electroplating industrial park were studied. Hakanson index approach was used to assess the ecological hazards of heavy metals in soils. Results showed that average concentrations of six heavy metals (Cu, Ni, Pb, Zn, Cd and Cr) in the soils were lower than the secondary criteria of environmental quality standard for soils, indicating limited harmful effects on the plants and the environment in general. Though the average soil concentrations were low, heavy metal concentrations in six sampling points located at the side of road still exceeded the criteria, with excessive rate of 13%. Statistic analysis showed that concentrations of Cu and Cd in roadside soils were significantly higher than those in non-roadside soils, indicating that the excessive heavy metal accumulations in the soil closely related with traffic transport. The average potential ecological hazard index of soils around Haining electroplating industrial park was 46.6, suggesting a slightly ecological harm. However, the potential ecological hazard index of soils with excessive heavy metals was 220-278, suggesting the medium ecological hazards. Cd was the most seriously ecological hazard factor.

  19. Usefulness of NIR spectroscopy for the estimation of the mineral composition and texture of soils and heavy metal uptake

    Science.gov (United States)

    Soriano-Disla, J. M.; Gómez, I.; Jordán, M. M.; Guerrero, C.; Navarro-Pedreño, J.; Meseguer, S.; Sanfeliu, T.

    2009-04-01

    The accumulation of heavy metals in soils from different sources (atmospheric deposition, agricultural practices, urban-industrial activities, etc.) is of a great environmental concern. In this sense, there is a consensus in the literature that the total heavy metals in soil are not a suitable tool for risk assessment regarding heavy metal mobility and bioavailability. Several approaches have been proposed to estimate this bioavailability but controversy exists to define an universal method. The bioavailability is influenced, apart from other properties like pH, organic matter, etc., by the mineral fraction and texture of a soil. However, the determination of these parameters, especially the mineral composition, is laborious, expensive, and time consuming. Thus, the objectives of this work are the estimation of the texture and mineral components of contrasting soils and the heavy metal uptake (Cu, Zn, Pb, Ni, Cr, Cd) by barley after sewage sludge application using NIR spectroscopy. A set of 70 contrasting soils from different parts of Spain were used for the analysis of the texture and mineral composition. The mineralogical characterization of soil samples was carried out by X-ray diffraction (XRD) using whole soil random powder, oriented clay on ceramic plates, and clay random powder. Chung method was used for semi-quantitative interpretation of X-ray diffraction patterns of soils, obtaining the percentage of Calcite (Ca), Quartz (Q), Albite (Ab), Potassium Feldspar (FK), phyllosilicates (PS). For the prediction of heavy metal uptake, the 70 soils were divided in two separate sets of 36 (experiment 1) and 34 (experiment 2) soils. The methodology for both experiments, separated in time, was the same. The soils were amended with the same dose of sewage sludge (15.71 g dry weight kg-1) and placed in pots. In these pots, a bioassay with barley, under greenhouse conditions, was carried out. Eight weeks after sowing, the plants were harvested. Roots were dried in an

  20. [Evaluation on environmental quality of heavy metals in soils and vegetables based on geostatistics and GIS].

    Science.gov (United States)

    Xie, Zheng-miao; Li, Jing; Wang, Bi-ling; Chen, Jian-jun

    2006-10-01

    Contents of heavy metals (Pb, Zn, Cd, Cu) in soils and vegetables from Dongguan town in Shangyu city, China were studied using geostatistical analysis and GIS technique to evaluate environmental quality. Based on the evaluation criteria, the distribution of the spatial variability of heavy metals in soil-vegetable system was mapped and analyzed. The results showed that the distribution of soil heavy metals in a large number of soil samples in Dongguan town was asymmetric. The contents of Zn and Cu were lower than those of Cd and Pb. The concentrations distribution of Pb, Zn, Cd and Cu in soils and vegetables were different in spatial variability. There was a close relationship between total and available contents of heavy metals in soil. The contents of Pb and Cd in green vegetables were higher than those of Zn and Cu and exceeded the national sanitation standards for vegetables.

  1. Fresh organic matter of municipal solid waste enhances phytoextraction of heavy metals from contaminated soil.

    Science.gov (United States)

    Salati, S; Quadri, G; Tambone, F; Adani, F

    2010-05-01

    In this study, the ability of the organic fraction of municipal solid wastes (OFMSW) to enhance heavy metal uptake of maize shoots compared with ethylenediamine disuccinic acid (EDDS) was tested on soil contaminated with heavy metals. Soils treated with OFMSW and EDDS significantly increased the concentration of heavy metals in maize shoots (increments of 302%, 66%, 184%, 169%, and 23% for Cr, Cu, Ni, Zn, and Pb with respect to the control and increments of 933%, 482%, 928%, 428%, and 5551% for soils treated with OFMSW and EDDS, respectively). In soil treated with OFMSW, metal uptake was favored because of the high presence of dissolved organic matter (DOM) (41.6x than soil control) that exhibited ligand properties because of the high presence of carboxylic acids. Because of the toxic effect of EDDS on maize plants, soil treated with OFMSW achieved the highest extraction of total heavy metals. Copyright 2009 Elsevier Ltd. All rights reserved.

  2. Kinetics comparison on simultaneous and sequential competitive adsorption of heavy metals in red soils

    Institute of Scientific and Technical Information of China (English)

    王艳; 李忠武; 黄斌; 蒋卫国; 郭亮; 黄金权; 曾光明

    2015-01-01

    To compare the adsorption kinetics of Cu, Zn and Cd introduced into red soils simultaneously and sequentially as well as their distribution coefficients, the ability of red soils to retain heavy metals was evaluated by performing batch experiments. The results indicate that Cu is preferentially adsorbed by red soils no matter in simultaneous or in sequential situation. The adsorption amount of Cd is the minimum in simultaneous competitive adsorption experiment. As heavy metals are added into red soils sequentially, the heavy metal adsorptions are relatively hard to reach equilibrium in 2 h. Red soils retain more Cd than Zn, which is opposite to the result in simultaneous adsorption. The addition sequences of heavy metals affect their adsorbed amounts in red soils to a certain extent. The joint distribution coefficients of metals in simultaneous adsorption are slightly higher than those in sequential adsorption.

  3. Heavy Metal Pollution in a Soil-Rice System in the Yangtze River Region of China

    Directory of Open Access Journals (Sweden)

    Zhouping Liu

    2015-12-01

    Full Text Available Heavy metals are regarded as toxic trace elements in the environment. Heavy metal pollution in soil or rice grains is of increasing concern. In this study, 101 pairs of soil and rice samples were collected from the major rice-producing areas along the Yangtze River in China. The soil properties and heavy metal (i.e., Cd, Hg, Pb and Cr concentrations in the soil and rice grains were analyzed to evaluate the heavy metal accumulation characteristics of the soil-rice systems. The results showed that the Cd, Hg, Pb and Cr concentrations in the soil ranged from 0.10 to 4.64, 0.01 to 1.46, 7.64 to 127.56, and 13.52 to 231.02 mg·kg−1, respectively. Approximately 37%, 16%, 60% and 70% of the rice grain samples were polluted by Cd, Hg, Pb, and Cr, respectively. The degree of heavy metal contamination in the soil-rice systems exhibited a regional variation. The interactions among the heavy metal elements may also influence the migration and accumulation of heavy metals in soil or paddy rice. The accumulation of heavy metals in soil and rice grains is related to a certain extent to the pH and soil organic matter (SOM. This study provides useful information regarding heavy metal accumulation in soil to support the safe production of rice in China. The findings from this study also provide a robust scientific basis for risk assessments regarding ecological protection and food safety.

  4. Heavy Metal Pollution in a Soil-Rice System in the Yangtze River Region of China.

    Science.gov (United States)

    Liu, Zhouping; Zhang, Qiaofen; Han, Tiqian; Ding, Yanfei; Sun, Junwei; Wang, Feijuan; Zhu, Cheng

    2015-12-22

    Heavy metals are regarded as toxic trace elements in the environment. Heavy metal pollution in soil or rice grains is of increasing concern. In this study, 101 pairs of soil and rice samples were collected from the major rice-producing areas along the Yangtze River in China. The soil properties and heavy metal (i.e., Cd, Hg, Pb and Cr) concentrations in the soil and rice grains were analyzed to evaluate the heavy metal accumulation characteristics of the soil-rice systems. The results showed that the Cd, Hg, Pb and Cr concentrations in the soil ranged from 0.10 to 4.64, 0.01 to 1.46, 7.64 to 127.56, and 13.52 to 231.02 mg·kg(-)¹, respectively. Approximately 37%, 16%, 60% and 70% of the rice grain samples were polluted by Cd, Hg, Pb, and Cr, respectively. The degree of heavy metal contamination in the soil-rice systems exhibited a regional variation. The interactions among the heavy metal elements may also influence the migration and accumulation of heavy metals in soil or paddy rice. The accumulation of heavy metals in soil and rice grains is related to a certain extent to the pH and soil organic matter (SOM). This study provides useful information regarding heavy metal accumulation in soil to support the safe production of rice in China. The findings from this study also provide a robust scientific basis for risk assessments regarding ecological protection and food safety.

  5. Thermodynamic Characteristics and Mechanisms of Heavy Metals Adsorbed onto Urban Soil

    Institute of Scientific and Technical Information of China (English)

    LI Yue-ming; KANG Chun-li; CHEN Wei-wei; MING Lian; ZHANG Sai; GUO Ping

    2013-01-01

    The thermodynamic characteristics of heavy metals adsorbed onto urban soil and the relative adsorption mechanisms were studied by the batch experiment.The results show that there existed dynamic adsorption-desorption equilibrium processes of cationic and anionic ions of heavy metals onto urban soil,which may have an impact on the pH of the adsorption system.The amounts of heavy metals adsorbed onto urban soil increased with the increase of the equilibrium concentration,but their adsorption amounts were not the maximum adsorption amounts.The higher the pH was,the greater the adsorption capacity of the urban soil at the same equilibrium concentration was,and the adsorption amounts of heavy metals onto urban soil followed the order of Pb>Cu>Cd>Zn>Ni.There were coordination reaction,hydrolysis reaction,exchange reaction in the adsorption processes of heavy metals onto urban soil.With the increase of pH,the influencing degree of pH on the different reactions of heavy metals in the soil increased,mean-while the effects of other physicochemical properties of soil on the adsorption of heavy metals were weakened.

  6. Mechanisms of Heavy Metal Sequestration in Soils: Plant-Microbe Interactions and Organic Matter Aging

    Energy Technology Data Exchange (ETDEWEB)

    Teresa W.-M. Fan; Richard M. Higashi; David Crowley; Andrew N. Lane: Teresa A. Cassel; Peter G. Green

    2004-12-31

    For stabilization of heavy metals at contaminated sites, the three way interaction among soil organic matter (OM)-microbes-plants, and their effect on heavy metal binding is critically important for long-term sustainability, a factor that is poorly understood at the molecular level. Using a soil aging system, the humification of plant matter such as wheat straw was probed along with the effect on microbial community on soil from the former McClellan Air Force Base.

  7. Modeling phytoextraction of heavy metals at multiply contaminated soils with hyperaccumulator plants

    OpenAIRE

    Khodaverdiloo, Habib

    2009-01-01

    Soils and waters contaminated with heavy metals pose a major environmental and human health problem that needs an effective and affordable technological solution. Phytoextraction offers a reasonable technology which uses plants to extract the heavy metals from soils. However, the effectiveness of this new method needs to be demonstrated by means of mathematical modeling. The phytoextraction models also are needed to manage the contaminated soils. A thorough literature review indic...

  8. Impact of treated wastewater on growth, respiration and hydraulic conductivity of citrus root systems in light and heavy soils.

    Science.gov (United States)

    Paudel, Indira; Cohen, Shabtai; Shaviv, Avi; Bar-Tal, Asher; Bernstein, Nirit; Heuer, Bruria; Ephrath, Jhonathan

    2016-06-01

    Roots interact with soil properties and irrigation water quality leading to changes in root growth, structure and function. We studied these interactions in an orchard and in lysimeters with clay and sandy loam soils. Minirhizotron imaging and manual sampling showed that root growth was three times lower in the clay relative to sandy loam soil. Treated wastewater (TWW) led to a large reduction in root growth with clay (45-55%) but not with sandy loam soil (hydraulic conductivity was severely reduced in clay soil. Treated wastewater increased respiration rate and reduced hydraulic conductivity of all root orders in clay but only of the lower root orders in sandy loam soil. Loss of hydraulic conductivity increased with root order in clay and clay irrigated with TWW. Respiration and hydraulic properties of all root orders were significantly affected by sodium-amended TWW in sandy loam soil. These changes in root order morphology, anatomy, physiology and hydraulic properties indicate rapid and major modifications of root systems in response to differences in soil type and water quality.

  9. Some Fertility Characteristics and Fertilizer Requirements of a Newly Reclaimed Upland Red Soil Derived from Quaternary Red Clay

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A series of field experiments from 1990 to 1994 in Yingtan, Jiangxi Province, were conducted on an upland red soil derived from Quaternary red clay which had been reclaimed three years before the experiments, in order to study the fertility characteristics and fertilizer requirements of the newly reclaimed soil. The field experiments included that on nutrient characteristics and fertilizer effect, that on K-supplying potential and K-Mg relationship, that on fertilization rates of K and N, etc. The newly reclaimed upland soil was low in both N and P, and its responses to nitrogen and phosphate application were very significant. The K-supplying potential was also low, so the soil was highly responsive to K fertilizer. The effect of Ca and Mg fertilizers was not so great for the reason that certain amounts of Ca and Mg were incorporated into the soil through application of calcium magnesium phosphate during land leveling before the experiments. Among the four micronutrients, B, Mo, Zn and Cu, B had the greatest effect on the soil. The fertilizer requirements of the soil were in an order of P and N > K > lime and B > Mg > Mo, Zn and Cu. Eight crops tested had different fertilizer-requiring characteristics. Rapeseed was very sensitive to P and B fertilizers. Barely was especially sensitive to P and lime and it also responded to B, Mo, Zn and Cu. And sweet potato was especially sensitive to K.

  10. Short-term Effects of Tillage Practices on Organic Carbon in Clay Loam Soil of Northeast China

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A tillage experiment, consisting of moldboard plow (MP), ridge tillage (RT), and no-tillage (NT), was performed in a randomized complete block design with four replicates to study the effect of 3-year tillage management on SOC content and its distribution in surface layer (30 cm) of a clay loam soil in northeast China. NT did not lead to significant increase of SOC in topsoil (0-5 cm) compared with MP and RT; however, the SOC content in NT soil was remarkably reduced at a depth of 5-20 cm. Accordingly, short-term (3-year) NT management tended to stratify SOC concentration, but not necessarily increase its storage in the plow layer for the soil.

  11. Strength change of clay in the vicinity of soil-cement column; Soil cement kairyotai dasetsu ni tomonau shuhen nendo no sendan kyodo henka

    Energy Technology Data Exchange (ETDEWEB)

    Miura, N.; Koga, K. [Saga University, Saga (Japan). Faculty of Science and Engineering; Shen, S. [Saga University, Saga (Japan); Nakamura, R.

    1998-06-21

    In relation to the installation of the improved soil cement column for improving soft ground, a laboratory experiment and on-site experimental installation are carried out for the study of the surrounding area supporting mechanism of the improved column. In the laboratory experiment, a column is installed using cement slurry into a model ground prepared by placing Ariake clay in a concrete tank, and a load test is conducted after a 28-day curing. In the on-site installation experiment, a column is installed near the mouth of a river flowing into the Ariake Sea, where changes in pore water pressure and soil strength, the latter by use of a double tube cone, are measured before and after the installation, and specimens are collected. Studies are conducted and findings are obtained as outlined below. The effects on the surrounding clay of the improved soil cement column installation consist of a decrease in soil strength during the installation, its recovery to the normal level, and an increase in soil strength due to recompaction and cementation to follow. Surrounding the installed column, there is formed a solidified region as wide as several percent of the column radius and, further surrounding the solidified region, there is formed a region with its strength enhanced, which is as wide by 1.5-20 times as the column radius. 26 refs., 19 figs., 2 tabs.

  12. Using poly-glutamic acid as soil-washing agent to remediate heavy metal-contaminated soils.

    Science.gov (United States)

    Yang, Zong-Han; Dong, Cheng-Di; Chen, Chiu-Wen; Sheu, Yih-Terng; Kao, Chih-Ming

    2017-05-20

    The extraction efficiency of heavy metals from soils using three forms of gamma poly-glutamic acid (γ-PGA) as the washing agents was investigated. Controlling factors including agent concentrations, extraction time, pH, and liquid to soil ratio were evaluated to determine the optimum operational conditions. The distribution of heavy metal species in soils before and after extraction processes was analyzed. Up to 46 and 74% of heavy metal removal efficiencies were achieved with one round and a sequential extraction process using H-bonding form of γ-PGA (200 mM) with washing time of 40 min, liquid to solid ratio of 10 to 1, and pH of 6. Major heavy metal removal mechanisms were (1) γ-PGA-promoted dissolution and (2) complexation of heavy metal with free carboxyl groups in γ-PGA, which resulted in heavy metal desorption from soils. Metal species on soils were redistributed after washing, and soils were remediated without destruction of soil structures and productivity.

  13. Ultrasonic and mechanical soil washing processes for the removal of heavy metals from soils.

    Science.gov (United States)

    Park, Beomguk; Son, Younggyu

    2017-03-01

    In order to determine the optimal operating conditions of full-scale soil washing processes for the removal of heavy metals, the effect of high-power ultrasound on the conventional mechanical soil washing process was investigated in a large lab-scale 28kHz sonoreactor. The soil samples were obtained from an abandoned railway station site in Seoul, Korea, which was contaminated with Cu (242.7±40.0mg/kg), Pb (441.3±49.8mg/kg), and Zn (358.0±35.7mg/kg). The treated concentrations of three heavy metal species in each process were compared with the regulation levels. It was found that higher performance, satisfying the regulation levels, was obtained in the ultrasonic/mechanical process due to the combined effects of macroscale mixing and microscale sonophysical effects. Moreover ultrasound played a more important role in less favorable conditions for the mechanical washing process (less acidic or less washing liquid conditions). Considering the application of the ultrasonic/mechanical soil washing process in real contaminated sites, the optimal conditions for the reactor with the bottom area of 15×15cm(2) and the input ultrasound power of 250W were determined as follows: (1) the amount of soil per an operation was a 300g; (2) the ratio of soil and liquid was 1:3; (3) the concentration of acidic washing liquid was 0.5M HCl. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. Influence of Long-term Application of Feedlot Manure Amendments on Water Repellency of a Clay Loam Soil.

    Science.gov (United States)

    Miller, Jim J; Beasley, Bruce W; Hazendonk, Paul; Drury, Craig F; Chanasyk, David S

    2017-05-01

    Long-term application of feedlot manure to cropland may increase the quantity of soil organic carbon (C) and change its quality, which may influence soil water repellency. The objective was to determine the influence of feedlot manure type (stockpiled vs. composted), bedding material (straw [ST] vs. woodchips [WD]), and application rate (13, 39, or 77 Mg ha) on repellency of a clay loam soil after 17 annual applications. The repellency was determined on all 14 treatments using the water repellency index ( index), the water drop penetration time (WDPT) method, and molarity of ethanol (MED) test. The C composition of particulate organic matter in soil of five selected treatments after 16 annual applications was also determined using C nuclear magnetic resonance-direct polarization with magic-angle spinning (NMR-DPMAS). Manure type had no significant ( > 0.05) effect on index and WDPT, and MED classification was similar. Mean index and WDPT values were significantly greater and MED classification more hydrophobic for WD than ST. Application rate had no effect on the index, but WDPT was significantly greater and MED classification more hydrophobic with increasing application rate. Strong ( > 0.7) but nonsignificant positive correlations were found between index and WDPT versus hydrophobic (alkyl + aromatic) C, lignin at 74 ppm (O-alkyl), and unspecified aromatic compounds at 144 ppm. Specific aromatic compounds also contributed more to repellency than alkyl, O-alkyl, and carbonyl compounds. Overall, all three methods consistently showed that repellency was greater for WD- than ST-amended clay loam soil, but manure type had no effect. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

  15. Effects of different fertilizers on the abundance and community structure of ammonia oxidizers in a yellow clay soil.

    Science.gov (United States)

    Yao, Huaiying; Huang, Sha; Qiu, Qiongfen; Li, Yaying; Wu, Lianghuan; Mi, Wenhai; Dai, Feng

    2016-08-01

    Yellow clay paddy soil (Oxisols) is a typical soil with low productivity in southern China. Nitrification inhibitors and slow release fertilizers have been used to improve nitrogen fertilizer utilization and reduce environmental impaction of the paddy soil. However, their effects on ammonia-oxidizing archaea (AOA) and ammonia-oxidizing bacteria (AOB) in paddy soil have rarely been investigated. In the present work, we compared the influences of several slow release fertilizers and nitrification inhibitors on the community structure and activities of the ammonia oxidizers in yellow clay soil. The abundances and community compositions of AOA and AOB were determined with qPCR, terminal restriction fragment length polymorphism (T-RFLP), and clone library approaches. Our results indicated that the potential nitrification rate (PNR) of the soil was significantly related to the abundances of both AOA and AOB. Nitrogen fertilizer application stimulated the growth of AOA and AOB, and the combinations of nitrapyrin with urea (NPU) and urea-formaldehyde (UF) inhibited the growth of AOA and AOB, respectively. Compared with other treatments, the applications of NPU and UF also led to significant shifts in the community compositions of AOA and AOB, respectively. NPU showed an inhibitory effect on AOA T-RF 166 bp that belonged to Nitrosotalea. UF had a negative effect on AOB T-RF 62 bp that was assigned to Nitrosospira. These results suggested that NPU inhibited PNR and increased nitrogen use efficiency (NUE) by inhibiting the growth of AOA and altering AOA community. UF showed no effect on NUE but decreased AOB abundance and shifted AOB community.

  16. Heavy Metals Phytoextraction from the Polluted Soils of Zakamensk (Russia)

    Science.gov (United States)

    Ubugunov, V.; Dorzhonova, V.; Ubugunov, L.

    2012-04-01

    the landscape - Modonkul river flood plain, were transferred by its waters and redeposited in an estuary, forming a cone of carrying out with capacity of up to 2 meters or more. The presence of large number of private houses with garden plots, in which the population grew potatoes, vegetables and fruit-berry trees cultures for food purposes, is the feature of many Siberian towns, including Zakamensk. The biogeochemical assessment of the town territory current status has shown a high level of contamination of soils and plants by heavy metals that poses a threat to the health of townsmen. In this connection search of effective ways of clearing up of the polluted soils by phytoextraction and selection of plants, capable to extract high quantities of heavy metals from soil in concrete ecological conditions, is actual. For this purpose we had been made experiments with 8 species of plants. Modeling of various conditions of pollution carried out by addition of following quantities of TS (%): 0; 25; 33; 50; 67; 75 and 100. In the report results of the experiments and the recommendations on using of plants as extractors on soils polluted by technogenic sand will be presented.

  17. Study on the mechanism of transport of heavy metals in soil in western suburb of Beijing

    Institute of Scientific and Technical Information of China (English)

    LI Hongyan; WANG Jinsheng; TENG Yanguo; WANG Zhenyu

    2006-01-01

    Researchers are paying more and more attention to the adsorption and transport of heavy metals in soil. In this study, laboratory experiments were performed to investigate the characteristics of adsorption and transport of mercury in soils of different locations in the western suburb of Beijing. To characterize the adsorption mechanism of mercury in soil, adsorption isotherms were determined through a batch experiment. Soil column experiments were performed in saturated soil under steady-state flow at a specific water head. The breakthrough curves ( BTC ) for the tracer (bromine) and mercury were obtained after continuous input. Moreover, two solute transport models [ convection-dispersion equation model (CDE)and two-site non-equilibrium model (TSN) ] were used to simulate heavy metal movement in soil on a laboratory column scale. According to the simulating results, we explored which model is more adapted to simulate the movement of heavy metals in saturated soil in the western suburb of Beijing.

  18. pH Effect on kinetics of Heavy Metal Sorption in Soils

    Institute of Scientific and Technical Information of China (English)

    LINYU-SUO; XUEJIA-HUA

    1994-01-01

    The pH effect on the sorption kinetics of heavy metals in soils was studied using a constant flow leaching method.The soil samples were red soil collected from Yingtan,Jiangxi,and yellow-brown soil from Nanjing,Jiansu,The heavy metals tested were zinc and cadmium.Assuming that the experimental data diffed to the following kinetic rate equation:1/c.dx/dt=kx∞-kx,the rate constant k of sorption could be determined from the slope of the straight line by plotting of 1/c,dx/dt vs.x.The results showed that the pH effect on the rate constants of heavy mental sorption in soils was very significant.The values of k decreased with increasing pH.The sorptions were more sensitive to pH in red soil than in yellow-brown soil.

  19. Distribution and risk evaluation of heavy metal in the soil of typical grassed swale

    Directory of Open Access Journals (Sweden)

    Li Binghui

    2016-01-01

    Full Text Available The concentration and distribution of Pb, Zn, Cu and Cr in the surface soil of three grassed swales located in the city of Beijing, Jiaxing and Shenzhen were studied in this paper. Evaluations on the risk of heavy metals were conducted based on the second level limit of soil environmental quality standard, using different indexes (i.e., single item, comprehensive items and potential ecological risk indexes. Results show that the concentration of Pb, Zn, Cu and Cr in all the soil samples is within the limit of second level of soil environmental quality standard of China, except the soil samples of the grassed swale from Shenzhen city. The result also shows that the concentration of the four kinds of heavy metals in the surface soil of grassed swales is linearly correlated with the depth of soil sampling points. In summary, ecological risk of heavy metals in the three grassed swales is slight.

  20. The influence of silica functionalized with silanes on migration of heavy metals in soil

    Directory of Open Access Journals (Sweden)

    Grzesiak Piotr

    2016-03-01

    Full Text Available 3-Mercaptopropyl-trimethoxysilane and [3-(2-aminoethylaminopropyl]trimethoxysilane were used to functionalize the surface of silica from Piotrowice in Poland to stabilize heavy metals (HMs and arsenic in soil. The soil for the study was sampled from the impact zone of Głogów Copper Smelter and Refinery. The soil samples were exposed to five-step Tessier sequential extraction. The speciation studies were limited to five sequentially defined fractions in which metal content was determined. The addition of unmodified silica did not affect significantly the concentration of metals in individual fractions. Significant changes were noted upon introduction of functionalized silica in the soil. The hybrid formulations obtained significantly reduce the release of heavy metals and arsenic from soil sorption complex. The results indicate the potential use of functional formulations for reduction of metal migration in soil in the areas of exceeded concentration of heavy metals and arsenic in the soil, caused by industrial activity.

  1. Properties of a clay soil from 1.5 to 3.5 years after biochar application and the impact on rice yield

    NARCIS (Netherlands)

    Carvalho, M.T.M.; Madari, B.E.; Bastiaans, L.; Oort, van P.A.J.; Leal, W.G.O.; Heinemann, A.B.; Silva, da M.A.S.; Maia, A.H.N.; Parsons, D.; Meinke, H.

    2016-01-01

    We assessed the impact of a single application of wood biochar on soil chemical and physical properties and aerobic rice grain yield on an irrigated kaolinitic clay Ferralsol in a tropical Savannah. We used linear mixed models to analyse the response of soil and plant variables to application rat

  2. Properties of a clay soil from 1.5 to 3.5 years after biochar application and the impact on rice yield

    NARCIS (Netherlands)

    Carvalho, M.T.M.; Madari, B.E.; Bastiaans, L.; Oort, van P.A.J.; Leal, W.G.O.; Heinemann, A.B.; Silva, da M.A.S.; Maia, A.H.N.; Parsons, D.; Meinke, H.

    2016-01-01

    We assessed the impact of a single application of wood biochar on soil chemical and physical properties and aerobic rice grain yield on an irrigated kaolinitic clay Ferralsol in a tropical Savannah. We used linear mixed models to analyse the response of soil and plant variables to application rat

  3. Effect of crop rotation, cultivar and nematicide on growth and yield of potato (Solanum tuberosum L.) in short rotations on a marine clay soil

    NARCIS (Netherlands)

    Scholte, K.; Jacob, 's J.J.

    1990-01-01

    The effects of cropping frequency on the yield of potato and on the development of soil-borne diseases was studied from 1979 to 1985 in a crop rotation experiment on a marine clay soil. Tuber yield decreased markedly with increasing cropping frequency. The yield of cv. Hertha was reduced by 27% in

  4. Direct determination of heavy metal speciation in soils by Exafs spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Manceau, A.; Harge, J.C.; Sarret, G.; Hazemann, J.L. [Universite de Grenoble, 38 (France); Boisset, M.C. [Paris-6 Univ., 75 (France). Laboratoire de Mineralogie, Cristallographie; Mench, M. [Institut National de Recherches Agronomiques (INRA), 33 - Villenave d`Ornon (France). Unite de Recherches en Agronomie; Cambier, Ph.; Prost, R. [Institut National de Recherches Agronomiques (INRA), 78 - Versailles (France). Unite de Science du Sol

    1997-12-31

    The potential of EXAFS spectroscopy to speciate and quantify the form of heavy metals in the solid fraction of soils is examined, taking lead and zinc as case studies. Three soils contaminated by different kinds of lead industrial activities (lead organometallics synthesis, Pb-Zn smelting and recycling lead from acid batteries). Results show the interaction of heavy metals with soil constituents, and direct molecular-level evidences are provided for the strong binding of lead by organic matter and of zinc by Mn oxides in soils. The low solubility and weak bio-degradability of these elements contribute to explain the fairly immobile nature of lead and zinc in these soils

  5. Progress in the remediation of hazardous heavy metal-polluted soils by natural zeolite.

    Science.gov (United States)

    Shi, Wei-yu; Shao, Hong-bo; Li, Hua; Shao, Ming-an; Du, Sheng

    2009-10-15

    Hazardous heavy metal pollution of soils is an increasingly urgent problem all over the world. The zeolite as a natural amendment has been studied extensively for the remediation of hazardous heavy metal-polluted soils with recycling. But its theory and application dose are not fully clear. This paper reviews the related aspects of theory and application progress for the remediation of hazardous heavy metal-polluted soils by natural zeolite, with special emphasis on single/co-remediation. Based on the comments on hazardous heavy metal behavior characteristics in leaching and rhizosphere and remediation with zeolite for heavy metal-polluted soils, it indicated that the research of rhizosphere should be strengthened. Theory of remediation with natural zeolite could make breakthroughs due to the investigation on synthetic zeolite. Co-remediation with natural zeolite may be applied and studied with more prospect and sustainable recycling.

  6. Mobilization of heavy metals from contaminated paddy soil by EDDS, EDTA, and elemental sulfur

    NARCIS (Netherlands)

    Wang, G.; Koopmans, G.F.; Song, J.; Temminghoff, E.J.M.; Luo, Y.; Zhao, Q.; Japenga, J.

    2007-01-01

    For enhanced phytoextraction, mobilization of heavy metals (HMs) from the soil solid phase to soil pore water is an important process. A pot incubation experiment mimicking field conditions was conducted to investigate the performance of three soil additives in mobilizing HMs from contaminated paddy

  7. Understanding molecular mechanisms for improving phytoremediation of heavy metal-contaminated soils.

    Science.gov (United States)

    Hong-Bo, Shao; Li-Ye, Chu; Cheng-Jiang, Ruan; Hua, Li; Dong-Gang, Guo; Wei-Xiang, Li

    2010-03-01

    Heavy metal pollution of soil is a significant environmental problem with a negative potential impact on human health and agriculture. Rhizosphere, as an important interface of soil and plants, plays a significant role in phytoremediation of contaminated soil by heavy metals, in which, microbial populations are known to affect heavy metal mobility and availability to the plant through release of chelating agents, acidification, phosphate solubilization and redox changes, and therefore, have potential to enhance phytoremediation processes. Phytoremediation strategies with appropriate heavy metal-adapted rhizobacteria or mycorrhizas have received more and more attention. In addition, some plants possess a range of potential mechanisms that may be involved in the detoxification of heavy metals, and they manage to survive under metal stresses. High tolerance to heavy metal toxicity could rely either on reduced uptake or increased plant internal sequestration, which is manifested by an interaction between a genotype and its environment.A coordinated network of molecular processes provides plants with multiple metal-detoxifying mechanisms and repair capabilities. The growing application of molecular genetic technologies has led to an increased understanding of mechanisms of heavy metal tolerance/accumulation in plants and, subsequently, many transgenic plants with increased heavy metal resistance, as well as increased uptake of heavy metals, have been developed for the purpose of phytoremediation. This article reviews advantages, possible mechanisms, current status and future direction of phytoremediation for heavy-metal-contaminated soils.

  8. Effects of drip irrigation on migration and distribution of heavy metals in soil profile.

    Science.gov (United States)

    Wei, Binggan; Yu, Jiangping; Dong, Yunshe; Yang, Linsheng; Wang, Jing; Xue, Yuan; Guo, Shufang

    2016-02-01

    Drip irrigation systems have been widely applied in semiarid and arid regions of China. However, little is known about the migration of heavy metals in cultivated soil under drip irrigation. Therefore, the concentrations of Cd, Cr, Cu, Ni, Pb, and Zn in soil were determined. The mean contents of Cd, Cr, Cu, Pb, Zn, and Ni in surface soil subjected to irrigation with low and high amounts of water (W1 and W2) were 0.11, 117.50, 37.51, 13.53, 78.10, and 38.41 mg/kg and 0.20, 94.45, 29.71, 22.48, 63.00, and 36.62 mg/kg, respectively. Metal concentrations in deep soil varied slightly between W1 and W2. Among different distances from the dropper, the metal levels in surface soil varied widely, while they varied slightly in deep soil. The Igeo (geo-accumulation index) values indicated that the soil was usually contaminated by Cr, Cu, and Cd. Under W1, Cd and Cu usually accumulated in surface soil near the dropper, while the other metals leached into subsurface soil. Moreover, the metals generally accumulated in soil away from the dropper. However, significant leaching of metals to the subsurface and deep soil was observed near the dropper under W2. Away from the dropper, Cd, Cr, Cu, Ni, and Pb usually accumulated in surface and deep soil. This suggested that heavy metals generally migrated to the soil away from the dropper when subjected to lower amounts of irrigation, while metals usually moved to surface soil and deep soil under high irrigation amounts. These findings indicate that drip irrigation greatly affected the distribution and migration of heavy metals in soil, with irrigation with lower amounts of irrigation water significantly affecting the horizontal migration of heavy metals and higher amounts influencing the vertical movement of heavy metals.

  9. Runoff of trifluralin, metolachlor, and metribuzin from a clay loam soil of Louisiana.

    Science.gov (United States)

    Kim, Jung-Ho; Feagley, Sam E

    2002-09-01

    Trifluralin[2,6-dinitro-N,N-dipropyl-4-(trifluormethyl)benzenamine], metolachlor[2-chloro-N-(2-ethyl-6-methylphenyl)-N-(2-methoxy-1-methylethyl) acetamide] and metribuzin[4-amino-6-(1,1-dimethylethyl)-3-(methylthio)-1,2,4-triazin-5(4H)one] were applied as pre-emergent herbicides to soybean plots in Louisiana (LA) at the rate of 1683 g/ha, 2759 g/ha and 609 g/ha, respectively. The concentrations of trifluralin in the runoff water ranged between 0.09 ng/mL and 0.02 ng/mL, which is lower than the 2 ng/mL US Environmental Protection Agency (EPA) advisory level for trifuralin in drinking water. Metolachlor concentrations in the runoff water ranged from 9.0 ng/mL to 221.5 ng/mL, which is both lower and higher than the 175 ng/mL EPA advisory level for metolachlor. Similarly, metribuzin concentrations in the runoff water ranged between 1.5 ng/mL and 56.2 ng/mL, which is also lower and higher than the 10 ng/mL EPA advisory level for metribuzin. Accordingly, from the field plots located on a Commerce clay loam soil in LA, although the concentration of trifluralin in runoff water were substantially lower than the EPA advisory level, metolachlor and metribuzin concentrations are likely to exceed the EPA advisory levels early on in the application season with a subsequent rapid decrease to safe levels. The total loss of trifluralin in runoff water was 0.005% of the applied amount over an 89 day period after application. The total loss of metolachlor and metribuzin in the runoff water was 4.67% and 5.36% of the applied amount, respectively, over a 22 day period after application. As such, there was almost no movement of trifluralin in the runoff water, whereas metolachlor and metribuzin were much more easily moved.

  10. Bioethanol Production from Sugarcane Grown in Heavy Metal-Contaminated Soils

    Directory of Open Access Journals (Sweden)

    Jun Xie

    2014-03-01

    Full Text Available Field and laboratory experiments were conducted to evaluate the feasibility of bioethanol production using the juice of sugarcane grown in heavy metal-contaminated soils. The results suggest that the sugar concentration was not adversely affected when the sugarcane was grown in the heavy metal-contaminated soil. Although the juice of sugarcane grown in contaminated soil contained elevated levels of heavy metals, sugar fermentation and ethanol production were not adversely affected when five selected yeast species were used to mediate the processes. The preliminary research findings obtained from this study have implications for developing cost-effective technologies for simultaneous bioethanol production and soil clean-up using heavy metal-contaminated soils for energy sugarcane farming.

  11. Effect of heavy metals on soil microbial activity and diversity in a reclaimed mining wasteland of red soil area

    Institute of Scientific and Technical Information of China (English)

    LIAO Min; CHEN Cheng-li; HUANG Chang-yong

    2005-01-01

    The microbial biomass, basal respiration and substrate utilization pattern in copper mining wasteland of red soil area, southern China, were investigated. The results indicated that soil microflora were obviously different compared with that of the non-mine soil.Microbial biomass and basal respiration were negatively affected by the elevated heavy metal levels. Two important microbial ecophysiological parameters, namely, the ratio of microbial biomass C( Cmic )/organic C( Corg ) and metabolic quotient(qCO2 ) were closely correlated to heavy metal stress. There was a significant decrease in the Cmic/Corg ratio and an increase in the metabolic quotient with increasing metal concentration. Multivariate analysis of Biolog data for sole carbon source utilization pattern demonstrated that heavy metal pollution had a significant impact on microbial community structure and functional diversity. All the results showed that soil microbiological parameters had great potential to become the early sensitive, effective and liable indicators of the stresses or perturbations in soils of mining ecosystems.

  12. Can mud (silt and clay) concentration be used to predict soil organic carbon content within seagrass ecosystems?

    Science.gov (United States)

    Serrano, Oscar; Lavery, Paul S.; Duarte, Carlos M.; Kendrick, Gary A.; Calafat, Antoni; York, Paul H.; Steven, Andy; Macreadie, Peter I.

    2016-09-01

    The emerging field of blue carbon science is seeking cost-effective ways to estimate the organic carbon content of soils that are bound by coastal vegetated ecosystems. Organic carbon (Corg) content in terrestrial soils and marine sediments has been correlated with mud content (i.e., silt and clay, particle sizes soil Corg content. We also combined these data with the δ13C signatures of the soil Corg to understand the sources of Corg stores. The results showed that mud is positively correlated with soil Corg content only when the contribution of seagrass-derived Corg to the sedimentary Corg pool is relatively low, such as in small and fast-growing meadows of the genera Zostera, Halodule and Halophila, and in bare sediments adjacent to seagrass ecosystems. In large and long-living seagrass meadows of the genera Posidonia and Amphibolis there was a lack of, or poor relationship between mud and soil Corg content, related to a higher contribution of seagrass-derived Corg to the sedimentary Corg pool in these meadows. The relatively high soil Corg contents with relatively low mud contents (e.g., mud-Corg saturation) in bare sediments and Zostera, Halodule and Halophila meadows was related to significant allochthonous inputs of terrestrial organic matter, while higher contribution of seagrass detritus in Amphibolis and Posidonia meadows disrupted the correlation expected between soil Corg and mud contents. This study shows that mud is not a universal proxy for blue carbon content in seagrass ecosystems, and therefore should not be applied generally across all seagrass habitats. Mud content can only be used as a proxy to estimate soil Corg content for scaling up purposes when opportunistic and/or low biomass seagrass species (i.e., Zostera, Halodule and Halophila) are present (explaining 34 to 91 % of variability), and in bare sediments (explaining 78 % of the variability). The results obtained could enable robust scaling up exercises at a low cost as part of blue carbon

  13. Heavy Metal Uptake by C. esculentus, S. alterniflora and Agronomic Plants from Contaminated Soils and Sediments.

    Science.gov (United States)

    1982-02-28

    HEAVY METAL UPTAKE BY C ESCULENTUS S ALIERNIFLORA ANDAGRONOIC PLANTS FR,, U’ UNIVERSITY COLL OF WALES ABERYSTWYTH DEPT OF GEOGRAPHY 6 E DAVIES 20 FE...uu-~~ HEAVY METAL UP TAKE BY C.* escu lentus, S.* a iter-nif cra AND AGRONOIMIC PLANTS FROM CONTAMINATED SOILS AND SEDIMENTSj PRINCIPAL INVESTIGATOR Dr...comprising a range of heavy metal contents. Analytical data for the selected soils are:- EDTA extract: jig/g soilLime Requirement AREA pH (cwt/acre) Pb

  14. Studies on Heavy Metal Pollution in Soil-Plant System: A Review

    Institute of Scientific and Technical Information of China (English)

    Wang Haiyan; Sun Xiangyang

    2003-01-01

    Heavy metal pollution in soil-plant system is of major environmental concern on a world scale and in China in par-ticular with the rapid development of industry. The heavy metal pollution status in soil-plant system in China, the research progresson the bioavailability of heavy metals (affecting factors, extraction methods, free-ion activity model, adsorption model, multivariateregression model, Q-I relationship, and compound pollution), and soil remediation are reviewed in the paper. Future research andmonitoring is also discussed.

  15. Mapping of Total Carbon and Clay Contents in Glacial Till Soil Using On-the-Go Near-Infrared Reflectance Spectroscopy and Partial Least Squares Regression

    Institute of Scientific and Technical Information of China (English)

    SHEN Zhang-Quan; SHAN Ying-Jie; PENG Li; JIANG Yu-Gen

    2013-01-01

    Characterizing spatial variability of soil attributes,using traditional soil sampling and laboratory analysis,is cost prohibitive.The potential benefit of managing soils on a site-specific basis is well established.High variations in glacial till soil render detailed soil mapping difficult with limited number of soil samples.To overcome this problem,this paper demonstrates the feasibility of soil carbon and clay mapping using the newly developed on-the-go near-infrared reflectance spectroscopy (NIRS).Compared with the geostatistics method,the partial least squares regression (PLSR),with NIRS measurements,could yield a more detailed map for both soil carbon and clay.Further,by using independent validation dataset,the accuracy of predicting could be improved significantly for soil clay content and only slightly for soil carbon content.Owing to the complexity of field conditions,more work on data processing and calibration modeling might be necessary for using on-the-go NIRS measurements.

  16. [Environmental geochemical baseline of heavy metals in soils of the Ili river basin and pollution evaluation].

    Science.gov (United States)

    Zhao, Xin-Ru; Nasier, Telajin; Cheng, Yong-Yi; Zhan, Jiang-Yu; Yang, Jian-Hong

    2014-06-01

    Environmental geochemical baseline models of Cu, Zn, Pb, As, Hg were established by standardized method in the ehernozem, chestnut soil, sierozem and saline soil from the Ili river valley region. The theoretical baseline values were calculated. Baseline factor pollution index evaluation method, environmental background value evaluation method and heavy metal cleanliness evaluation method were used to compare soil pollution degrees. The baseline factor pollution index evaluation showed that As pollution was the most prominent among the four typical types of soils within the river basin, with 7.14%, 9.76%, 7.50% of sampling points in chernozem, chestnut soil and sierozem reached the heavy pollution, respectively. 7.32% of sampling points of chestnut soil reached the permitted heavy metal Pb pollution index in the chestnut soil. The variation extent of As and Pb was the largest, indicating large human disturbance. Environmental background value evaluation showed that As was the main pollution element, followed by Cu, Zn and Pb. Heavy metal cleanliness evaluation showed that Cu, Zn and Pb were better than cleanliness level 2 and Hg was the of cleanliness level 1 in all four types of soils. As showed moderate pollution in sierozem, and it was of cleanliness level 2 or better in chernozem, chestnut soil and saline-alkali soil. Comparing the three evaluation systems, the baseline factor pollution index evaluation more comprehensively reflected the geochemical migration characteristics of elements and the soil formation processes, and the pollution assessment could be specific to the sampling points. The environmental background value evaluation neglected the natural migration of heavy metals and the deposition process in the soil since it was established on the regional background values. The main purpose of the heavy metal cleanliness evaluation was to evaluate the safety degree of soil environment.

  17. Competitive adsorption of heavy metals in soil underlying an infiltration facility installed in an urban area.

    Science.gov (United States)

    Hossain, M A; Furumai, H; Nakajima, F

    2009-01-01

    Accumulation of heavy metals at elevated concentration and potential of considerable amount of the accumulated heavy metals to reach the soil system was observed from earlier studies in soakaways sediments within an infiltration facility in Tokyo, Japan. In order to understand the competitive adsorption behaviour of heavy metals Zn, Ni and Cu in soil, competitive batch adsorption experiments were carried out using single metal and binary metal combinations on soil samples representative of underlying soil and surface soil at the site. Speciation analysis of the adsorbed metals was carried out through BCR sequential extraction method. Among the metals, Cu was not affected by competition while Zn and Ni were affected by competition of coexisting metals. The parameters of fitted 'Freundlich' and 'Langmuir' isotherms indicated more intense competition in underlying soil compared to surface soil for adsorption of Zn and Ni. The speciation of adsorbed metals revealed less selectivity of Zn and Ni to soil organic matter, while dominance of organic bound fraction was observed for Cu, especially in organic rich surface soil. Compared to underlying soil, the surface soil is expected to provide greater adsorption to heavy metals as well as provide greater stability to adsorbed metals, especially for Cu.

  18. Form finding of heavy metals in technogenic soil contamination at polyelement pollution

    Directory of Open Access Journals (Sweden)

    Kuraeva I.V.

    2014-12-01

    Full Text Available The forms compounds with heavy metals pollution enterprises in various fields: coal, ferrous and nonferrous metallurgy, machine building and metalworking. Found that the initial ratio of elements forms varies with pollution. The degree of toxicity of soil contaminated with heavy metals, is determined not so much the total content elements as mobile forms, and forms related to the organic matter, oxides, hydroxides of Fe, Al, are involved in the biogenic migration of elements and admission to the neighboring environment. Investigated the soil in the immediate vicinity of the industrial enterprises in various fields, as well as soil health and recreational areas. Samples were collected from a depth of 0-20 cm. The analysis found that, in contaminated soils, the total content of metals above background. The content of heavy metals in soils located near the concentrating factory in Makeyevka, in almost all the investigated samples above background, it is noted in the soils of the private sector (garden plots. Most of the soil contaminated with heavy metals and industrial areas the neighborhood of ferrous and non-ferrous metallurgy, areas of residential areas and garden plots. Less prone to technogenic pollution with heavy metals territories located near the production association "Azot". It should be noted that the background of element content in soil sediments depend on the content of their parent rocks in the underlying, by landscape-geochemical factors on themselves and physico-chemical properties of soils

  19. [Effects of Tillage on Distribution of Heavy Metals and Organic Matter Within Purple Paddy Soil Aggregates].

    Science.gov (United States)

    Shi, Qiong-bin; Zhao, Xiu-lan; Chang, Tong-ju; Lu, Ji-wen

    2016-05-15

    A long-term experiment was utilized to study the effects of tillage methods on the contents and distribution characteristics of organic matter and heavy metals (Cu, Zn, Pb, Cd, Fe and Mn) in aggregates with different sizes (including 1-2, 0.25-1, 0.05-0.25 mm and tillage methods including flooded paddy field (FPF) and paddy-upland rotation (PR). The relationship between heavy metals and organic matter in soil aggregates was also analyzed. The results showed that the aggregates of two tillage methods were dominated by 0.05-0.25 mm and tillage methods did not significantly affect the contents of heavy metals in soils, but FPF could enhance the accumulation and distribution of aggregate, organic matter and heavy metals in aggregates with diameters of 1-2 mm and 0.25-1 mm. Correlation analysis found that there was a negative correlation between the contents of heavy metals and organic matter in soil aggregates, but a positive correlation between the amounts of heavy metal and organic matter accumulated in soil aggregates. From the slope of the correlation analysis equations, we could found that the sensitivities of heavy metals to the changes of soil organic matters followed the order of Mn > Zn > Pb > Cu > Fe > Cd under the same tillage. When it came to the same heavy metal, it was more sensitive in PR than in FPF.

  20. Effect of Drying on Heavy Metal Fraction Distribution in Rice Paddy Soil

    Science.gov (United States)

    Qi, Yanbing; Huang, Biao; Darilek, Jeremy Landon

    2014-01-01

    An understanding of how redox conditions affect soil heavy metal fractions in rice paddies is important due to its implications for heavy metal mobility and plant uptake. Rice paddy soil samples routinely undergo oxidation prior to heavy metal analysis. Fraction distribution of Cu, Pb, Ni, and Cd from paddy soil with a wide pH range was investigated. Samples were both dried according to standard protocols and also preserved under anaerobic conditions through the sampling and analysis process and heavy metals were then sequentially extracted for the exchangeable and carbonate bound fraction (acid soluble fraction), iron and manganese oxide bound fraction (reducible fraction), organic bound fraction (oxidizable fraction), and residual fraction. Fractions were affected by redox conditions across all pH ranges. Drying decreased reducible fraction of all heavy metals. Curesidual fraction, Pboxidizable fraction, Cdresidual fraction, and Niresidual fraction increased by 25%, 33%, 35%, and >60%, respectively. Pbresidual fraction, Niacid soluble fraction, and Cdoxidizable fraction decreased 33%, 25%, and 15%, respectively. Drying paddy soil prior to heavy metal analysis overestimated Pb and underestimated Cu, Ni, and Cd. In future studies, samples should be stored after injecting N2 gas to maintain the redox potential of soil prior to heavy metal analysis, and investigate the correlation between heavy metal fraction distribution under field conditions and air-dried samples. PMID:24823670

  1. Potentiality of laboratory visible and near infrared spectroscopy for determining clay content in forest soil: a case study from high forest beech (fagus sylvatica in Calabria (southern Italy

    Directory of Open Access Journals (Sweden)

    Massimo Conforti

    2014-01-01

    Full Text Available Clay content is the most important textural fraction because affects soil fertility and productivity.Reflectance spectroscopy in the visible and near infrared (Vis-NIR, 350-2500 nm spectral region could be an alternative to laboratory standard methods.This paper was aimed to develop a calibration model with laboratory-based soil Vis-NIR spectra for clay content determination and mapping clay content using a geostatistical approach.Soil samples were collected at 235 locations in a forest area of southern Italy and analyzed in laboratory for clay content and Vis-NIR spectroscopic measurements.Partial least squared regression (PLSR was applied to establish a relationships between reflectance and clay content. Calibration model was developed using only 175 samples, while the remaining 60 samples were used for testing the model. The results of PLSR were satisfactory and ordinary kriging was used for spatial interpolation of clay content determined both using conventional method and the PLSR model.

  2. Influence of industrial heavy metal pollution on soil free-living nematode population.

    Science.gov (United States)

    Pen-Mouratov, Stanislav; Shukurov, Nosir; Steinberger, Yosef

    2008-03-01

    The effect of distance from a heavy metal pollution source on the soil nematode community (trophic structure, sex structure, and taxa composition) was investigated along a 15-km transect originating at the Almalyk Industrial Complex, Uzbekistan (pollution source). The soil nematode community was exposed to heavy metal influence both directly and through soil properties changes. Pollution effect on the density and biomass of soil free-living nematodes was found to be highest at pollution source, with fungivores and plant parasites dominating at the upper and deeper soil layers next to the pollution source. These groups decreased along the transect, yielding domination to bacteria- and fungi-feeders. The sex ratio of nematode communities was found to be dependent on heavy metal pollution levels, with the juveniles being the most sensitive nematode group. The Maturity and modified Maturity Indices, reflecting the degree of disturbance of the soil ecosystem, were found to be the most sensitive indices.

  3. Distribution of Heavy Metal Pollution in Surface Soil Samples in China: A Graphical Review.

    Science.gov (United States)

    Duan, Qiannan; Lee, Jianchao; Liu, Yansong; Chen, Han; Hu, Huanyu

    2016-09-01

    Soil pollution in China is one of most wide and severe in the world. Although environmental researchers are well aware of the acuteness of soil pollution in China, a precise and comprehensive mapping system of soil pollution has never been released. By compiling, integrating and processing nearly a decade of soil pollution data, we have created cornerstone maps that illustrate the distribution and concentration of cadmium, lead, zinc, arsenic, copper and chromium in surficial soil across the nation. These summarized maps and the integrated data provide precise geographic coordinates and heavy metal concentrations; they are also the first ones to provide such thorough and comprehensive details about heavy metal soil pollution in China. In this study, we focus on some of the most polluted areas to illustrate the severity of this pressing environmental problem and demonstrate that most developed and populous areas have been subjected to heavy metal pollution.

  4. The use of dialdehyde starch derivatives in the phytoremediation of soils contaminated with heavy metals.

    Science.gov (United States)

    Antonkiewicz, Jacek; Para, Andrzej

    2016-01-01

    Products of the reaction between dialdehyde starch and Y-NH2 compounds (e.g. semicarbazide or hydrazine) are effective ligands for metal ions. The usefulness of these derivatives was tested in the experiment, both in terms of the immobilization of heavy metal ions in soil and the potential application in phytoextraction processes. The experimental model comprised maize and the ions of such metals as: Zn(II), Pb(II), Cu(II), Cd(II), and Ni(II). The amount of maize yield, as well as heavy metal content and uptake by the aboveground parts and roots of maize, were studied during a three-year pot experiment. The results of the study indicate the significant impact of heavy metals on reduced yield and increased heavy metal content in maize. Soil-applied dialdehyde starch derivatives resulted in lower yields, particularly disemicarbazone (DASS), but in heavy metal-contaminated soils they largely limited the negative impact of these metals both on yielding and heavy metal content in plants, particularly dihydrazone (DASH). It was demonstrated that the application of dihydrazone (DASH) to a soil polluted with heavy metals boosted the uptake of Zn, Pb, Cu, and Cd from the soil, hence there is a possibility to use this compound in the phytoextraction of these metals from the soil. Decreased Ni uptake was also determined, hence the possibility of using this compound in the immobilization of this metal. The study showed that dialdehyde starch disemicarbazone was ineffective in the discussed processes.

  5. Heavy metal concentrations in soils and vegetation in urban areas of Quezon City, Philippines.

    Science.gov (United States)

    Navarrete, Ian A; Gabiana, Christella C; Dumo, Joan Ruby E; Salmo, Severino G; Guzman, Maria Aileen Leah G; Valera, Nestor S; Espiritu, Emilyn Q

    2017-04-01

    Limited data have been published on the chemistry of urban soils and vegetation in the Philippines. The aim of this study is to quantify the concentrations of heavy metals (i.e., Cr, Ni, Cu, Zn, and Pb) in soils and vegetation in the urban landscape of Quezon City, Philippines, and to elucidate the relationships between soil properties and the concentration of heavy metals pertaining to different land uses [i.e., protected forest (LM), park and wildlife area (PA), landfill (PL), urban poor residential and industrial areas (RA), and commercial areas (CA)]. Soil (0-15 cm) and senescent plant leaves were collected and were analyzed for soil properties and heavy metal concentrations. Results revealed that the concentrations of heavy metals (i.e., Cr, Ni, Cu, Zn, and Pb) in urban soils were higher in areas where anthropogenic activities or disturbance (PL, RA, and CA) were dominant as compared to the less disturbed areas (LM and PA). Organic matter and available phosphorous were strongly correlated with heavy metal concentrations, suggesting that heavy metal concentrations were primarily controlled by these soil properties. The average foliar heavy metal concentrations varied, ranging from 0 to 0.4 mg/kg for Cd, 0-10 mg/kg for Cr, 2-22 mg/kg for Cu, 0-5 mg/kg for Pb, and 11-250 mg/kg for Zn. The concentrations of Cd and Cr exceeded the critical threshold concentrations in some plants. Leaves of plants growing in PL (i.e., landfill) showed the highest levels of heavy metal contamination. Our results revealed that anthropogenic activities and disturbance caused by the rapid urbanization of the city are major contributors to the heavy metal accumulation and persistence in the soils in these areas.

  6. [Effects of Different Residue Part Inputs of Corn Straws on CO2 Efflux and Microbial Biomass in Clay Loam and Sandy Loam Black Soils].

    Science.gov (United States)

    Liu, Si-yi; Liang, Ai-zhen; Yang, Xue-ming; Zhang, Xiao-ping; Jia, Shu-xia; Chen, Xue-wen; Zhang, Shi-xiu; Sun, Bing-jie; Chen, Sheng-long

    2015-07-01

    The decomposed rate of crop residues is a major determinant for carbon balance and nutrient cycling in agroecosystem. In this study, a constant temperature incubation study was conducted to evaluate CO2 emission and microbial biomass based on four different parts of corn straw (roots, lower stem, upper stem and leaves) and two soils with different textures (sandy loam and clay loam) from the black soil region. The relationships between soil CO2 emission, microbial biomass and the ratio of carbon (C) to nitrogen (N) and lignin of corn residues were analyzed by the linear regression. Results showed that the production of CO2 was increased with the addition of different parts of corn straw to soil, with the value of priming effect (PE) ranged from 215. 53 µmol . g-1 to 335. 17 µmol . g -1. Except for corn leaves, the cumulative CO2 production and PE of clay loam soil were significantly higher than those in sandy loam soil. The correlation of PE with lignin/N was obviously more significant than that with lignin concentration, nitrogen concentration and C/N of corn residue. The addition of corn straw to soil increased the contents of MBC and MBN and decreased MBC/MBN, which suggested that more nitrogen rather than carbon was conserved in microbial community. The augmenter of microbial biomass in sandy loam soil was greater than that in clay loam soil, but the total dissolved nitrogen was lower. Our results indicated that the differences in CO2 emission with the addition of residues to soils were primarily ascribe to the different lignin/N ratio in different corn parts; and the corn residues added into the sandy loam soil could enhance carbon sequestration, microbial biomass and nitrogen holding ability relative to clay loam soil.

  7. Contamination of soils with heavy metals and metalloids and its ecological hazard (analytic review)

    Science.gov (United States)

    Vodyanitskii, Yu. N.

    2013-07-01

    According to the present-day ecotoxicologic data, hazardous heavy metals/metalloids form the following sequence in the soil: Se > Tl > Sb > Cd > V > Hg > Ni > Cu > Cr > As > Ba. This sequence differs from the well-known series of the hazardous heavy elements, in which the danger of Pb and Zn is exaggerated, whereas that of V, Sb, and Ba, is underestimated. Tl also should be included in the list of hazardous elements in the soil. At present, the stress is made on the investigation of heavy metals/metalloids in agricultural soils rather than in urban soils, as the former produce contaminated products poisoning both animals and humans. The main sources of soil contamination with heavy metals are the following: aerial deposition from stationary and moving sources; hydrogenic contamination from the industrial sewage discharging into water bodies; sewage sediments; organic and mineral fertilizers and chemicals for plant protection, tailing dumps of ash, slag, ores, and sludge. In addition to the impact on plants and groundwater, heavy metals/metalloids exert a negative effect on the soil proper. Soil microorganisms appear to be very sensitive to the influence of heavy elements.

  8. Heavy metal concentrations in plants and soils at roadside locations and parks of urban Guangzhou

    Institute of Scientific and Technical Information of China (English)

    GUAN Dong-sheng; M. R. Peart

    2006-01-01

    Levels of Cu, Ni, Zn, Pb and Cr were measured in soils and trees in urban Guangzhou, China. Tree and soil samples were collected from the roadside, urban parks and a university campus. Mean concentrations of Cu, Ni, Zn, Pb and Cr in tree leaves were28.3, 7.7, 142.1, 23.4, and 195.1 mg/kg respectively. In a comparison of heavy metal concentrations in tree leaves between roads and park locations, only Pb concentrations were significantly higher in the former. Heavy metal concentrations were lower in the roots compared to leaves. It indicated that heavy metal pollution of trees is mainly from air pollution. For all top soil samples the mean concentrations of Cu, Ni, Zn, Pb and Cr were 24.3, 17.3, 121.5, 63.9 and 88.7 mg/kg, respectively. Heavy metal concentrations in roadside soils were higher and their coefficient of variation was higher than those in urban parks. Comparing heavy metal concentrations in trees and soil between urban Guangzhou and Hainan Island, China, Cu, Ni, Zn, Pb and Cr levels in soils and plants in urban Guangzhou were evidently affected by the human impact. However the heavy metal content in the soil compared to some international standards do not give cause for concern. Some observations on the implications of the data for environmental monitoring are made.

  9. Effects of Soil-Vegetation-Atmosphere Interaction on the Stability of a Clay Slope: A Case Study

    Directory of Open Access Journals (Sweden)

    Pedone Giuseppe

    2016-01-01

    Full Text Available Deep and slow landslide processes are frequently observed in clay slopes located along the Southern Apennines (Italy. A case study representative of these processes, named Pisciolo case study, is discussed in the paper. The geo-hydro-mechanical characteristics of the materials involved in the instability phenomena are initially discussed. Pluviometric, piezometric, inclinometric and GPS monitoring data are subsequently presented, suggesting that rainfall infiltration constitutes the main factor inducing slope movements. The connection between formation of landslide bodies and slope-atmosphere interaction has been demonstrated through a hydro-mechanical finite element analysis, whose results are finally reported in the work. This analysis has been conducted employing a constitutive model that is capable of simulating both saturated and unsaturated soil behaviour, as well as a boundary condition able to simulate the effects of the soil-vegetation-atmosphere interaction.

  10. CONSTRUCTION OF A NEW HIGHWAY EMBANKMENT ON THE SOFT CLAY SOIL TREATMENT BY STONE COLUMNS IN MALAYSIA

    Directory of Open Access Journals (Sweden)

    QASIM A. ALJANABI

    2013-08-01

    Full Text Available To continue of the second phase of the East Coast Expressway between Kuantan and Kula Terengganu in Malaysia system innovative solution are required. In this new phase there are embankment region has been subjected to extensive soft clay soil. These comprise typically of clayey silts of very high water content and undrained shear strengths in the range of 8 to 11 kPa to depths of up to 8m. To support an embankment height of up to 12 m, were filled and thereafter Vibro Replacement treatment was carried out to treat the very soft soil. Extensive instrumentation using rod settlement gauges, inclinometers and piezometers were installed to monitor the performance of the Vibro Replacement treatment. This paper reports on aspects of design, installation and the measured results from the instrumentation scheme.

  11. Heavy Metal Transfer from Soil to Vegetable in Southern Jiangsu Province, China

    Institute of Scientific and Technical Information of China (English)

    HAO Xiu-Zhen; ZHOU Dong-Mei; HUANG De-Qian; CANG Long; ZHANG Hai-Lin; WANG Hui

    2009-01-01

    Vegetable fields in peri-urban areas receive large amounts of extraneous heavy metals because of rapid urbanization and industrialization in China.The concentrations of Cu,Zn,and Pb in 30 soil samples and 32 vegetable samples,collected from 30 different sites in southern Jiangsu Province of China,were measured and their transfer from soil to vegetable was determined.The results showed that the soil samples had wide ranges of pH (4.25-7.85) and electrical conductivity (EC) (0.24-3.42 dS m-1).Among the soil samples,there were four soil samples containing higher Cu and two soil samples containing higher Zn concentrations than those specified in the Chinese Soil Environmental Quality Standard II.However,no vegetable sample was found to contain a high level of Cu or Zn.In contrast,one vegetable sample contained 0.243 mg Pb kg-1 FW,which was above the Chinese Food Hygiene Standard,whereas the corresponding soil Pb concentration was lower than the Chinese Soil Environmental Quality Standard II.The transfer coefficients of Cu of all vegetable samples exceeded the suggested coefficient range,implying that extraneous Cu had high mobility and bioavailability to vegetables.There was no significant correlation between extractable soil heavy metal concentrations with four kinds of extractants and soil pH,EC,heavy metal concentrations in vegetables and soils,except that soil pH correlated well with the extractable soil Cu,Zn,and Pb concentrations with 1.0 mol L-1 NH4NO3.Moreover,diethylenetriamine pentaacetic acid (DTPA)extraction method was a more efficient method of extracting heavy metals from the soils independent of soil pH and EC than other three methods used.

  12. Pollution status of Pakistan: a retrospective review on heavy metal contamination of water, soil, and vegetables.

    Science.gov (United States)

    Waseem, Amir; Arshad, Jahanzaib; Iqbal, Farhat; Sajjad, Ashif; Mehmood, Zahid; Murtaza, Ghulam

    2014-01-01

    Trace heavy metals, such as arsenic, cadmium, lead, chromium, nickel, and mercury, are important environmental pollutants, particularly in areas with high anthropogenic pressure. In addition to these metals, copper, manganese, iron, and zinc are also important trace micronutrients. The presence of trace heavy metals in the atmosphere, soil, and water can cause serious problems to all organisms, and the ubiquitous bioavailability of these heavy metal can result in bioaccumulation in the food chain which especially can be highly dangerous to human health. This study reviews the heavy metal contamination in several areas of Pakistan over the past few years, particularly to assess the heavy metal contamination in water (ground water, surface water, and waste water), soil, sediments, particulate matter, and vegetables. The listed contaminations affect the drinking water quality, ecological environment, and food chain. Moreover, the toxicity induced by contaminated water, soil, and vegetables poses serious threat to human health.

  13. Pollution Status of Pakistan: A Retrospective Review on Heavy Metal Contamination of Water, Soil, and Vegetables

    Directory of Open Access Journals (Sweden)

    Amir Waseem

    2014-01-01

    Full Text Available Trace heavy metals, such as arsenic, cadmium, lead, chromium, nickel, and mercury, are important environmental pollutants, particularly in areas with high anthropogenic pressure. In addition to these metals, copper, manganese, iron, and zinc are also important trace micronutrients. The presence of trace heavy metals in the atmosphere, soil, and water can cause serious problems to all organisms, and the ubiquitous bioavailability of these heavy metal can result in bioaccumulation in the food chain which especially can be highly dangerous to human health. This study reviews the heavy metal contamination in several areas of Pakistan over the past few years, particularly to assess the heavy metal contamination in water (ground water, surface water, and waste water, soil, sediments, particulate matter, and vegetables. The listed contaminations affect the drinking water quality, ecological environment, and food chain. Moreover, the toxicity induced by contaminated water, soil, and vegetables poses serious threat to human health.

  14. Effects of Heavy Metal Contamination on Microbial Biomass and Community Structure in Soils

    Institute of Scientific and Technical Information of China (English)

    杨元根; 刘丛强; 徐磊; 吴攀; 张国平

    2004-01-01

    Zinc smelting near Magu Town, Hezhang County, Guizhou Province, resulted in vegetation destruction and the accumulation of heavy metals, to varying extent, in adjacent soils, where up to 162.2-877.9 mg·kg+-1 Zn, 37.24-305.6 mg·kg+-1 Pb, and 0.50-16.43 mg·kg+-1 Cd, were detected. These values greatly exceed the background levels of these elements in soils. The concentrations of heavy metals (particularly Pb, Zn) were positively correlated with the contents of Fe-2O-3 and Al-2O-3 in the soils, showing that Fe and Al oxides play an important role in retaining heavy metals. Chemical fractionation indicates that Pb and Zn were associated mainly with Fe and Mn oxides and minerals, whereas Cd was dominated by exchangeable form. Microbial biomass in the soils was relatively low, in the range of 57.00-388.0μg C·g+-1, and was negatively correlated with heavy metal concentrations in the soils. The correlation coefficient of microbial biomass C to Zn concentrations in the soils was as high as -0.778 (p<0.01), indicating that the heavy metal contamination has toxic effects on microorganisms in soil. The results of Biolog measurements demonstrated that there were no significant changes in microbial community structure in the heavy metal contaminated soils. Gene fragments were similar to one another after the DNA was extracted from soil microbes and experienced PCR (polymerase chain reaction) and DGGE (denaturing gradient gel electrophoresis) reactions. These results indicated that light heavy-metal pollution may not result in any change in soil microbial community structure.

  15. Estimation of heavy metal-contaminated soils' mechanical characteristics using electrical resistivity.

    Science.gov (United States)

    Chu, Ya; Liu, Songyu; Wang, Fei; Cai, Guojun; Bian, Hanliang

    2017-05-01

    Under the process of urbanization in China, more and more attention has been paid to the reuse of heavy metal-contaminated sites. The shear characteristics of heavy metal-contaminated soils are investigated by electrical detection in this paper. Three metal ions (Zn(2+), Cd(2+), and Pb(2+)) were used, the metal concentrations of which are 50, 166.67, 500, 1666.67, and 5000 mg/kg, respectively. Direct shear tests were used to investigate the influence of heavy metal ions on the shear characters of soil samples. It is found that with the addition of heavy metal ions, the shear strength, cohesion, and friction angle of contaminated soils are higher than the control samples. The higher concentration of heavy metal ions penetrated in soils, the higher these engineering characteristics of contaminated soils observed. In addition, an electrical resistivity detection machine is used to evaluate the shear characteristics of contaminated soils. The electrical resistivity test results show that there is a decreasing tendency of resistivity with the increase of heavy metal ion concentrations in soils. Compared with the electrical resistivity and the shear characteristics of metal-contaminated soils, it is found that, under fixed compactness and saturation, shear strength of metal-contaminated soils decreased with the increase of resistivity. A basic linear relationship between C/log(N + 10) and resistivity can be observed, and there is a basic linear relationship between φ/log(N + 10) and resistivity. Besides, a comparison of the measured and predicted shear characteristics shows a high accuracy, indicating that the resistivity can be used to evaluate the shear characteristics of heavy metal contaminated soils.

  16. Mineral materials as feasible amendments to stabilize heavy metals in polluted urban soils.

    Science.gov (United States)

    Zhang, Mingkui; Pu, Jincheng

    2011-01-01

    Four minerals, agricultural limestone (AL), rock phosphate (RP), palygorskite (PG), and calcium magnesium phosphate (CMP), were evaluated by means of chemical fractions of heavy metals in soils and concentrations of heavy metals in leachates from columns to determine their ability to stabilize heavy metals in polluted urban soils. Two urban soils (calcareous soil and acidic soil) polluted with cadmium, copper, zinc and lead were selected and amended in the laboratory with the mineral materials) for 12 months. Results indicated that application of the mineral materials reduced exchangeable metals in the sequence of Pb, Cd > Cu > Zn. The reduction of exchangeable fraction of heavy metals in the soils amended with different mineral materials followed the sequence of CMP, PG > AL > RP. Reductions of heavy metals leached were based on comparison with cumulative totals of heavy metals eluted through 12 pore volumes from an untreated soil. The reductions of the metals eluted from the calcareous soil amended with the RP, AL, PG and CMP were 1.98%, 38.89%, 64.81% and 75.93% for Cd, 8.51%, 40.42%, 60.64% and 55.32% for Cu, 1.76%, 52.94%, 70.00% and 74.12% for Pb, and 28.42%, 52.74%, 64.38% and 49.66% for Zn. Those from the acidic soil amended with the CMP, PG, AL, and RP were 25.65%, 68.06%, 78.01% and 79.06% for Cd, 26.56%, 49.64%, 43.40% and 34.68% for Cu, 44.44%, 33.32%, 61.11% and 69.44% for Pb, and 18.46%, 43.77%, 41.98% and 40.68% for Zn. The CMP and PG treatments were superior to the AL and RP for stabilizing heavy metals in the polluted urban soils.

  17. Influence of the soil sealing on the geoaccumulation index of heavy metals and various pollution factors.

    Science.gov (United States)

    Charzyński, Przemysław; Plak, Andrzej; Hanaka, Agnieszka

    2017-02-01

    Soil sealing belongs to the most destructive and damaging processes to the soil environment. Soil sealing interrupts or greatly restricts the exchange of matter and energy between the biosphere, hydrosphere, and atmosphere and the soil environment. The aim of this study was to compare the content of heavy metals (Cd, Cr, Cu, Hg, Fe, Ni, Pb, Zn) of Ekranic Technosols by applying indicators such as geoaccumulation index (I geo), enrichment factor (EF), and pollution load index (PLI), which allowed to determine quantitatively the impact of the soil sealing degree on the content of heavy metals and to distinguish natural from anthropogenic sources of origin of heavy metals. In general, 42 soils from different parts of the city of Toruń (NW Poland) were sampled and divided into three groups according to the degree of soil sealing: completely sealed with asphalt or concrete (A), semi-permeable (partially sealed with cobblestones and concrete paving slabs (B)), and reference (non-sealed) (C). The results indicate that the artificial sealing in urban areas slightly affects the content of heavy metals in soils. However, based on PLI, I geo, and EF, it was found that the sealing has influence on soil properties and unsealed soil is the most exposed to the accumulation of pollutants.

  18. EVALUATION OF THE DEGREE OF POLLUTION WITH HEAVY METALS OF SOILS OF TIMISOARA TOWN

    Directory of Open Access Journals (Sweden)

    Stela URUIOC

    2008-01-01

    Full Text Available Timisoara town as other urban centres is exposed to some possible dangers that soil and plant contamination with heavy metals can produce. The our studies has been realised on ten soil samples and three plant samples gathered from important areas regarding pollution with heavy metals of Timisoara city. The samples have been analyzed through atomic absorption spectrometry with a device type Varian 2, that has a double beam. The content in cobalt, copper, manganese, zinc, cadmium, nickel, lead, magnesium and iron from soil is changeable under maximum admission. The content in iron, manganese, copper, lead, cadmium from Tilia cordata leaves is situated in normal limits, but higher than in soil.

  19. Bioethanol Production from Sugarcane Grown in Heavy Metal-Contaminated Soils

    National Research Council Canada - National Science Library

    Jun Xie; Qiang Weng; Guangying Ye; Sishi Luo; Rui Zhu; Aiping Zhang; Xiaoyang Chen; Chuxia Lin

    2014-01-01

    ... species were used to mediate the processes. The preliminary research findings obtained from this study have implications for developing cost-effective technologies for simultaneous bioethanol production and soil clean-up using heavy metal...

  20. Phytoremediation of heavy metal contaminated saline soils using halophytes: current progress and future perspectives

    National Research Council Canada - National Science Library

    Sun, Yuebing; Liang, Lichen; Huo, Xiaohui; Zhou, Qixing; Li, Song; Liu, Weitao

    2017-01-01

    .... Phytoremediation, defined as the use of plants to remove pollutants from the environment and (or) to render them harmless, is a low cost, environmentally friendly, and effective method for the decontamination of soils polluted by heavy metals...

  1. Ionomics: Genes and QTLs controlling heavy metal uptake in perennial grasses grown on phytoxic soil

    Science.gov (United States)

    Perennial grasses occupy diverse soils throughout the world, including many sites contaminated with heavy metals. Uncovering the genetic architecture of QTLs controlling mineral homoeostasis is critical for understanding the biochemical pathways that determine the elemental profiles of perennial pl...

  2. Phytoextraction of heavy metals by canola (Brassica napus) and radish (Raphanus sativus) grown on multicontaminated soil

    Energy Technology Data Exchange (ETDEWEB)

    Marchiol, L.; Assolari, S.; Sacco, P.; Zerbi, G

    2004-11-01

    Phytoextraction can provide an effective in situ technique for removing heavy metals from polluted soils. The experiment reported in this paper was undertaken to study the basic potential of phytoextraction of Brassica napus (canola) and Raphanus sativus (radish) grown on a multi-metal contaminated soil in the framework of a pot-experiment. Chlorophyll contents and gas exchanges were measured during the experiment; the heavy metal phytoextraction efficiency of canola and radish were also determined and the phytoextraction coefficient for each metal calculated. Data indicated that both species are moderately tolerant to heavy metals and that radish is more so than canola. These species showed relatively low phytoremediation potential of multicontaminated soils. They could possibly be used with success in marginally polluted soils where their growth would not be impaired and the extraction of heavy metals could be maintained at satisfying levels.

  3. Evaluation of Heavy Metal Pollution in Dazhai Mellow-soil Field

    Institute of Scientific and Technical Information of China (English)

    Jingjing ZHANG; Yongqing ZHANG; Hua ZHANG; Wenjuan ZHANG

    2016-01-01

    In order to determine the pollution condition of heavy metal in Dazhai mellow-soil field,the content of Zn,Cr,Cu,Ni,Pb,As,Cd and Hg in this area were analyzed,the content of heavy metals in soils in Shanxi Soil Environment Quality Standard and the secondary standard of National Soil Environment Quality Standard were used as evaluation standard. Based on the single factor index method,the result showed that the content of 8 heavy metals in soil didn’t exceed the secondary standard of National Soil Environment Quality Standard,while the content of As,Hg,Ni,Pb exceeded Shanxi Soil Environment Quality Standard. The soil in the study areas reached high pollution of As,Hg,Pb,and the pollution index of Cu,Ni,Zn,Cd reached a high level. The potential ecological risk index order was Hg ﹥ Cd ﹥ As ﹥ Pb ﹥ Ni﹥ Cu ﹥ Zn ﹥ Cr. The pollution level risk intensity was mild. The correlation analysis indicated that Cr,Ni,Zn,Cu,Cd and As were probably from the same source,while Hg and other heavy metals were not correlated. Heavy metals with high levels of pollution were closely related to agricultural fertilization,tourism,transportation,construction,daily life and production activities.

  4. Heavy Metal Displacement in Chelate-Assisted Phytoremediation of Biosolids Soil

    Science.gov (United States)

    Kirkham, M. B.; Liphadzi, M. S.

    2005-05-01

    Heavy metals in biosolids (sewage sludge) applied to land contaminate the soil. Phytoremediation, the use of plants to clean up toxic heavy metals, might remove them. Chelating agents are added to soil to solubilize the metals for enhanced phytoextraction. Yet no studies follow the displacement and leaching of heavy metals in soil with biosolids following solubilization with chelates. The objective of this work was to determine the mobility of heavy metals, as affected by a chelate, in soil (Haynie very fine sandy loam) from a 25-year old sludge farm. Soil columns (105 cm long; 39 cm in diameter) either had a plant (hybrid poplar; Populus deltoides Marsh. x P. nigra L.) or no plant. When the poplars were 144 days old, the tetrasodium salt of the chelating agent EDTA (ethylenediamine-tetraacetic acid) was irrigated onto the soil at a rate of 1 g per kg of soil. Drainage water, soil, and plants were analyzed for three toxic heavy metals (Cd, Ni, Pb) and four essential heavy metals (Cu, Fe, Mn, Zn). Without EDTA, concentrations of the seven heavy metals in the leachate from columns with or without plants were low or below detection limits. With or without plants, the EDTA mobilized all heavy metals and increased their concentration in drainage water. Without plants, the concentrations of Cd, Cu, Fe, Pb, and Zn in the leachate from columns with EDTA were above drinking-water standards. (There is no drinking-water standard for Ni.) The presence of poplar plants in the soil reduced the concentrations of Cu, Fe, and Zn in the leachate so it fell within drinking-water standards. Concentrations of Cd and Pb in the leachate remained above drinking-water standards with or without plants. At harvest (124 days after the EDTA application), total concentration of each heavy metal in the soil at different depths in the columns with EDTA was similar to that in the columns without EDTA. The chelate did not affect the concentration of heavy metals in the roots, stems, or leaves

  5. Stability and heavy metal distribution of soil aggregates affected by application of apatite, lime, and charcoal.

    Science.gov (United States)

    Cui, Hongbiao; Ma, Kaiqiang; Fan, Yuchao; Peng, Xinhua; Mao, Jingdong; Zhou, Dongmei; Zhang, Zhongbin; Zhou, Jing

    2016-06-01

    Only a few studies have been reported on the stability and heavy metal distribution of soil aggregates after soil treatments to reduce the availability of heavy metals. In this study, apatite (22.3 t ha(-1)), lime (4.45 t ha(-1)), and charcoal (66.8 t ha(-1)) were applied to a heavy metal-contaminated soil for 4 years. The stability and heavy metal distribution of soil aggregates were investigated by dry and wet sieving. No significant change in the dry mean weight diameter was observed in any treatments. Compared with the control, three-amendment treatments significantly increased the wet mean weight diameter, but only charcoal treatment significantly increased the wet aggregate stability. The soil treatments increased the content of soil organic carbon, and the fraction 0.25-2 mm contained the highest content of soil organic carbon. Amendments' application slightly increased soil total Cu and Cd, but decreased the concentrations of CaCl2 -extractable Cu and Cd except for the fraction 2 and 0.25-2 mm contained the highest concentrations of CaCl2-extractable Cu and Cd, accounted for about 74.5-86.8 % of CaCl2-extractable Cu and Cd in soil. The results indicated that amendments' application increased the wet soil aggregate stability and decreased the available Cu and Cd. The distribution of available heavy metals in wet soil aggregates was not controlled by soil aggregate stability, but possibly by soil organic carbon.

  6. Relationship between specific surface area and the dry end of the water retention curve for soils with varying clay and organic carbon contents

    DEFF Research Database (Denmark)

    Resurreccion, Augustus C.; Møldrup, Per; Tuller, Markus;

    2011-01-01

    with ethylene glycol monoethyl ether (SA_EGME) only for organic soils with n > 10. A strong correlation between the ratio of the two surface area estimates and the Dexter number was observed and applied as an additional scaling function in the TO model to rescale the soil water retention curve at low water...... dominate over capillary forces, have also been used to estimate soil specific surface area (SA). In the present study, the dry end of the SWRC was measured with a chilled-mirror dew point psychrometer for 41 Danish soils covering a wide range of clay (CL) and organic carbon (OC) contents. The 41 soils were...

  7. Spatial distribution of selected heavy metals and soil fertility status in south-eastern Serbia

    Science.gov (United States)

    Saljnikov, E.; Mrvic, V.; Cakmak, D.; Nikoloski, M.; Perovic, V.; Kostic, L.; Brebanovic, B.

    2009-04-01

    Environmental pollution by heavy metals is one of the most powerful factors destroying biosphere components that directly affecting agricultural production quality and therefore health of human and animals. Regional soil contamination by heavy metals occurs mainly in industrial areas and in big cities. However, pollutants can be air-and/or water-transferred to big distances and may accumulated far from industrial zone what makes difficult to distinguish original background concentrations of heavy metals in soil. Our study covers south-eastern part of Serbia and is a part of a big project studying soil fertility and heavy metal contamination all around Serbia. Diverse natural characteristics and heterogeneity of soil cover, as well as, human activity greatly influenced soil fertility parameters, while, diverse geological substrate and human activity determined the level of potential geochemical pollution. There are number of industrial factories functioning from the last century on the studied area. Also, close to studied area, there was a mining in the middle of the last century. About 600 soil samples from surface 0-30 cm were investigated for main soil fertility characteristics (pH, humus, available K and P) and concentrations of selected heavy metals (As, Cd, Cr, Ni and Pb). Soils graded as very acidic cover 46% of the area, which are mainly mountains with acidic parent materials. Content of humus in 41% of soil samples were below 3%. The most of the soils (71%) are weakly supplied available phosphorus. While available potassium in more than 70% is presented in the concentrations enough for good soil quality. So, about 75% of studied area is characterized with unfavorable soil fertility properties (extremly low soil pH, very low content of available P, about half of the area maintained low soil humus) that is located under forests, meadows and pastures. Content of heavy metals on studied area in 80% of sampled soils was below maximum allowed concentrations

  8. Spreading and accumulation of heavy metals in soils of railway-side areas

    Directory of Open Access Journals (Sweden)

    N. Bobryk

    2015-09-01

    Full Text Available Following the landscape-environmental survey of the lands adjoining the single-track railway No. 193 Chop – Uzhhorod – Sianky – Lviv within Zakarpatska oblast (Transcarpathia, we have identified certain regularities in the spreading, accumulation and dispersion of some heavy metals (Cu, Pb, Zn, Ni in soils. For the purpose of study, the soils were taken at different distances from the railway (0, 25, 50 and 100 m within the following key points of the railway under study: Chop, Uzhhorod, Perechyn, Velyky Berezny, and Volosianka. The soil samples taken at the distance of 250 m from the railway were assumed the control group. Mass concentration of acid-soluble forms of heavy metals, considered as the main anthropogenic constituent of heavy metal stock in soils, was determined by means of atomic absorption analysis. Content of heavy metals in soils under study was compared with background data available in scientific literature. The results were evaluated by calculation of concentration factor commonly considered as a reliable and self-descriptive ecological constituent. In general, increased content of heavy metals was shown to be peculiar for soils that directly adjoin the railways (to 25 m; their content in remoter soils decreases considerably. In the control soils (250 m from the railway, the content of heavy metals reportedly significantly decreases as compared with other soils; however partial accumulation of lead, zinc and nickel compounds does take place there too. Dependence between the accumulations of heavy metals and the distance from the railway was described by polynomial equations. Such deviation from the linear distribution can be explained by the height of the railway embankments, absorbing properties of the railway-side plants, migration processes in soils, and direction of prevailing winds. Zinc was established to have the highest value of concentration factor (Кс = 1.04–10.54. Pollutant accumulation was most

  9. Remediation of Steel Slag on Acidic Soil Contaminated by Heavy Metal

    Institute of Scientific and Technical Information of China (English)

    Haihong; GU; Fuping; LI; Xiang; GUAN; Zhongwei; LI; Qiang; YU

    2013-01-01

    The technology of in situ immobilization with amendments is an important measure that remediates the soil contaminated by heavy metals, and selecting economical and effective amendments is the key. The effects and mechanism of steel slag, the silicon-rich alkaline byproduct which can remediate acidic soil contaminated by heavy metal, are mainly introduced in this paper to provide theory reference for future research. Firstly, the paper analyzes current research situation of in situ immobilization with amendments. Then, it introduces the main physicochemical properties of steel slag, and the effect on soil pH value as well as heavy metal activity. Besides, the paper elaborates the promoting effect on silicon-requiring plant and the strengthening mechanism for its resistant capability of heavy metal. According to the analysis, the application of steel slag could be a potential valuable strategy to remediate acidic soil contaminated by heavy metal by modifying the transformation of heavy metals in both soil and plant, so that the translocation of heavy metal in food chain is reduced.

  10. Pollution Status of Pakistan: A Retrospective Review on Heavy Metal Contamination of Water, Soil, and Vegetables

    OpenAIRE

    Amir Waseem; Jahanzaib Arshad; Farhat Iqbal; Ashif Sajjad; Zahid Mehmood; Ghulam Murtaza

    2014-01-01

    Trace heavy metals, such as arsenic, cadmium, lead, chromium, nickel, and mercury, are important environmental pollutants, particularly in areas with high anthropogenic pressure. In addition to these metals, copper, manganese, iron, and zinc are also important trace micronutrients. The presence of trace heavy metals in the atmosphere, soil, and water can cause serious problems to all organisms, and the ubiquitous bioavailability of these heavy metal can result in bioaccumulation in the food c...

  11. Biosurfactant and Heavy Metal Resistance Activity of Streptomyces spp. Isolated from Saltpan Soil

    OpenAIRE

    Lakshmipathy Deepika; Krishnan Kannabiran

    2010-01-01

    Actinomycetes were isolated from the marine soil samples collected at the Ennore saltpan and were screened for biosurfactant and heavy metal resistance activity. Biosurfactant activity was evaluated by haemolysis, drop collapsing test and lipase production. Similarly heavy metal resistance was determined by tube method and agar diffusion method. Among them, two actinomycetes isolates VITDDK1 and VITDDK2 exhibited significant biosurfactant and heavy metal resistance activity. Based on the Hide...

  12. Feasibility study using improved clay as landfill liner-soil materials%改良黏土作为填埋场衬里土料的可行性研究

    Institute of Scientific and Technical Information of China (English)

    陆海军; 栾茂田; 张金利

    2011-01-01

    To prevent effectively the transport of heavy metal ions in landfill leachate, adding materials, granular activated carbon (GAC) and acid-activated bentonite capable of strongly adsorbing pollutants to the conventional compacted clay liner is one method that has been tried. The adsorption of Cr(VI) to clay, clay containing 3% or 6% GAC and 3 or 6% acid-activated bentonite were investigated by laboratory batch tests. In order to evaluate the feasibility of liner-soil materials, geotechnical properties, including volumetric swelling, proved clay used as volumetric shrinkage, hydraulic conductivity and unconfined compressive strength, were measured in laboratory geotechnical tests. The results of hatch tests indicate that the Cr(VI) sorption to clay containing GAC and acidactivated bentonite is much greater than Cr (VI) sorption to natural clay. GAC and acid-activated bentonite are two potential materials for use as sorptive amendments for trapping heavy metals in clay landfill liners. The results of geotechnical tests show that the clay containing GAC or acid-activated bentonite exhibits ≤4% of volumetric shrinkage, 〈1 × 10^-7 cm/s of hydraulic conductivity and 〉200 kPa of unconfined compressive strength in some scope of water content at modified compaction. These findings suggest that the clay containing GAC or acid-activated bentonite can be potentially utilized as compacted liner-soil materials.%针对传统压实黏土衬里不能有效阻止渗滤液中重金属离子迁移的缺点,采用颗粒活性炭、酸活化膨润土两种吸附剂改良黏土衬里以达到提高其吸附能力的目的.通过室内平衡吸附试验,对黏土、3%或6%颗粒活性炭改良的黏土以及3%或6%酸活化膨润土改良的黏土吸附重金属Cr(Ⅵ)的性质进行了观察.为了评价改良黏土作为填埋场衬里土料的可靠性,通过室内土工试验对衬里土料的体膨胀率、体缩率、渗透系数以及无

  13. [Effects of heavy machinery operation on the structural characters of cultivated soils in black soil region of Northeast China].

    Science.gov (United States)

    Wang, En-Heng; Chai, Ya-Fan; Chen, Xiang-Wei

    2008-02-01

    With the cultivated soils in black soil region of Northeast China as test objects, this paper measured their structural characters such as soil strength, bulk density, and non-capillary porosity/capillary porosity (NCP/CP) ratio before and after heavy and medium-sized machinery operation, aimed to study the effects of machinery operation on the physical properties of test soils. The results showed that after machinery operation, there existed three distinct layers from top to bottom in the soil profiles, i.e., plowed layer, cumulative compacted layer, and non-affected layer, according to the changes of soil strength. Under medium-sized machinery operation, these three layers were shallower, and there was a new plow pan at the depth between 17.5 and 30 cm. Heavy machinery operation had significant positive effects on the improvement of topsoil structure (P machinery, the bulk density of topsoil decreased by 7.2% and 3.5%, respectively, and NCP/CP increased by 556.6% after subsoiling, which would benefit water infiltration, reinforce water storage, and weaken the threat of soil erosion. The main action of heavy machinery operation was soil loosening, while that of medium-sized machinery operation was soil compacting.

  14. Ecotoxicological characteristic of a soil polluted by radioactive elements and heavy metals before and after its bioremediation

    Science.gov (United States)

    Georgiev, P.; Groudev, S.; Spasova, I.; Nikolova, M.

    2012-04-01

    Cinnamon soils from southeastern Bulgaria are heavily polluted with radionuclides (uranium, radium) and toxic heavy metals (copper and lead) due to the winds transportation of fine particles from flotation dumps to the soil surface. As a result of this, the polluted soils are characterized by a slightly alkaline pH (7.82) and positive net neutralization potential (+136.8 kg CaCO3/t). A fresh sample of cinnamon soil was subjected to remediation under laboratory conditions in four lysimeters each containing 70 kg of soil. The preliminary study revealed that most of the pollutants were presented as carbonate, reducible and oxidisable mobility fractions, i.e. pollutants ions were specifically adsorbed by carbonate and ferric iron minerals or were capsulated in sulfides. The applied soil treatment was connected with leaching of the pollutants located mainly in the horizon A, their transportation through the soil profile as soluble forms, and their precipitation in the rich-in-clay subhorizon B3. The efficiency of leaching depended on the activity of the indigenous microflora and on the chemical processes connected with solubilization of pollutants and formation of stable complexes with some organic compounds, chloride and hydrocarbonate ions. These processes were considerably enhanced by adding hay to the horizon A and irrigating the soil with water solutions containing the above-mentioned ions and some nutrients. After 18 months of treatment, each of the soil profiles in the different lysimeters was divided into five sections reflecting the different soil layers. The soil in these sections was subjected to a detailed chemical analysis and the data obtained were compared with the relevant data obtained before the start of the experiment. The best leaching of pollutants from horizon A was measured in the variants where soil mulching was applied. For example, the best leaching of lead (54.5 %) was found in the variant combining this technique and irrigation with solutions

  15. [Soil Heavy Metal Spatial Distribution and Source Analysis Around an Aluminum Plant in Baotou].

    Science.gov (United States)

    Zhang, Lian-ke; Li, Hai-peng; Huang, Xue-min; Li, Yu-mei; Jiao, Kun-ling; Sun, Peng; Wang, Wei-da

    2016-03-15

    The soil with 500 m distance from an aluminum plant in Baotou was studied. A total of 64 soil samples were taken from the 0-5 cm, 5-20 cm, 20-40 cm and 40-60 cm layers, and the contents of Cu, Pb, Zn, Cr, Cd, Ni and Mn were tested, respectively. The correlation analysis and principal component analysis were used to identify the sources of these heavy metals in soils. The results suggested that the contents of Cu, Pb, Zn, Cr, Cd, Ni and Mn in study area were 32.9, 50.35, 69.92, 43.78, 0.54, 554.42 and 36.65 mg · kg⁻¹ respectively. All seven heavy metals tested were overweight compared with the background values of soil in Inner Mongolia. The spatial distribution of heavy metals showed that the horizontal distribution of heavy metals was obviously enriched in the southwest, while in vertical distribution, the heavy metal content (0 to 5 cm) was highest in the surface soil, and the heavy metal content decreased with increasing depth and tended to be stabilized when the depth was over 20 cm. Source analysis showed that the source of Cu, Zn, Cr and Mn might be influenced by the aluminum plant and the surrounding industrial activity. The source of Pb and Cd might be mainly related to road transportation. The source of Ni may be affected by agricultural activities and soil parent material together.

  16. Pedogenesis, geochemical forms of heavy metals, and artifact weathering in an urban soil chronosequence, Detroit, Michigan

    Energy Technology Data Exchange (ETDEWEB)

    Howard, Jeffrey L., E-mail: jhoward@wayne.edu [Department of Geology, Wayne State University, Detroit, MI 48202 (United States); Olszewska, Dorota [Department of Geology, Wayne State University, Detroit, MI 48202 (United States)

    2011-03-15

    An urban soil chronosequence in downtown Detroit, MI was studied to determine the effects of time on pedogenesis and heavy metal sequestration. The soils developed in fill derived from mixed sandy and clayey diamicton parent materials on a level late Pleistocene lakebed plain under grass vegetation in a humid-temperate (mesic) climate. The chronosequence is comprised of soils in vacant lots (12 and 44 years old) and parks (96 and 120 years old), all located within 100 m of a roadway. An A-horizon 16 cm thick with 2% organic matter has developed after only 12 years of pedogenesis. The 12 year-old soil shows accelerated weathering of iron (e.g. nails) and cement artifacts attributed to corrosion by excess soluble salts of uncertain origin. Carbonate and Fe-oxide are immobilizing agents for heavy metals, hence it is recommended that drywall, plaster, cement and iron artifacts be left in soils at brownfield sites for their ameliorating effects. - Research highlights: > An A horizon has developed in these urban soils after only 12 years of pedogenesis. > Iron and cement artifacts have undergone accelerated weathering due to deicing salts. > One soil is contaminated by lead derived from weathered paint. > Artifact weathering can have ameliorating effects on urban soils contaminated by heavy metals. - Weathering of artifacts can have ameliorating effects on heavy metal-polluted soils at brownfield sites.

  17. Hydraulic conductivity study of compacted clay soils used as landfill liners for an acidic waste.

    Science.gov (United States)

    Hamdi, Noureddine; Srasra, Ezzeddine

    2013-01-01

    Three natural clayey soils from Tunisia were studied to assess their suitability for use as a liner for an acid waste disposal site. An investigation of the effect of the mineral composition and mechanical compaction on the hydraulic conductivity and fluoride and phosphate removal of three different soils is presented. The hydraulic conductivity of these three natural soils are 8.5 × 10(-10), 2.08 × 10(-9) and 6.8 × 10(-10)m/s for soil-1, soil-2 and soil-3, respectively. Soil specimens were compacted under various compaction strains in order to obtain three wet densities (1850, 1950 and 2050 kg/m(3)). In this condition, the hydraulic conductivity (k) was reduced with increasing density of sample for all soils. The test results of hydraulic conductivity at long-term (>200 days) using acidic waste solution (pH=2.7, charged with fluoride and phosphate ions) shows a decrease in k with time only for natural soil-1 and soil-2. However, the specimens of soil-2 compressed to the two highest densities (1950 and 2050 kg/m(3)) are cracked after 60 and 20 days, respectively, of hydraulic conductivity testing. This damage is the result of a continued increase in the internal stress due to the swelling and to the effect of aggressive wastewater. The analysis of anions shows that the retention of fluoride is higher compared to phosphate and soil-1 has the highest sorption capacity.

  18. Liquefaction Susceptibility of Soils With Clay Particles from Earthquake-induced Landslides

    Institute of Scientific and Technical Information of China (English)

    CHEN Chuan-sheng; JIANG Xin; ZHANG Xu

    2007-01-01

    The main reason for earthquake-induced landslides is liquefaction of soil, a process considered to occur mostly in sandy soils. Liquefaction can occur in clayey soils has also been reported and proven in the recent literature, but liquefaction in clayey soils still remains unclear and there are many questions that need to be addressed. In order to address these questions, an depth study on the liquefaction potential of clayey soils was conducted on the basis of field investigation and a series of laboratory tests on the samples collected from the sliding surface of the landslides. The liquefaction potential of the soils was studied by means of undrained cyclic ring-shear tests. Research results show that the liquefaction potential of sandy soils is higher than that of clayey soils given the same void ratio;the soil resistance to liquefaction rises with an increase in plasticity for clayey soils; relation between plasticity index and the liquefaction potential of soil can be used in practical application to estimate the liquefaction potential of soil.

  19. Coastal soil clay content estimation using reflectance spectroscopy%反射光谱估算滨海土壤黏粒含量

    Institute of Scientific and Technical Information of China (English)

    焦彩霞; 郑光辉; 赏刚; 孙东敏

    2016-01-01

    Clay content is an important soil property that affects the structure, nutrient supply and other characteristics of soils. Variations in clay content can indicate the degree of soil development or soil age. In traditional chemical analyses of soil properties, the extractant interacts in the solution and at the solution-particle interface, thus altering the equilibrium between the soil solid and solution phases. Soil reflectance spectroscopy has been developed as an effective alternative method of measuring soil properties primarily because it requires minimal sample preparation and it is fast, cost-effective, non-destructive and non-hazardous to the soil. In recent decades, research on the use of reflectance spectroscopy in soil science has achieved rapid advances. Reflectance spectroscopy can be successfully applied to estimate the soil clay content. However, the mechanisms of soil clay content estimation using reflectance spectroscopy are not very clear. The goals of this study were to identify the bands within the range of 360-2490 nm that can be used to estimate the clay content and explore the mechanisms of the clay content estimation using reflectance spectroscopy. A total of 150 coastal soil samples were collected. The soil reflectance spectra were measured in a dark room using a FieldSpec 3 portable spectrometer. Raw spectral data were pre-processed by smoothing (R) and then by first derivative (FD), continuum removal (CR) or reciprocal transformation (DS). Calibration (75 soil samples) and validation datasets (75 soil samples) were obtained from 1,000 random selections of the data. Stepwise multiple linear regression (SMLR) and partial least squares regression (PLSR) were performed to estimate the soil clay content and to further identify the bands useful for modeling this parameter. The results indicated that the SMLR analysis of CR and R spectra and the PLSR analysis of R and FD spectra were characterized by good calibration and validation accuracies

  20. Consolidation and Using Oriented Evaluation of Heavy Metal Pollution in Typical Soils of Hollowed Villages of Plain Agricultural Zones:A Case Study of Yucheng City, Shandong Province, China

    Directory of Open Access Journals (Sweden)

    LI Yu-rui

    2017-06-01

    Full Text Available Hollow village renovation is an important content of rural land comprehensive consolidation. Under the core goal of sustainable utilization of land, revealing heavy metal pollution in typical soils of hollow village is the guiding link of the consolidation work, especially the reconstruction of farmland. Taking Yucheng City of Huang-Huai-Hai Plain as an example, this paper aims to analyze the content of As, Cd, Cr, Cu, Ni, Pb and Zn in seven kinds of typical soils, namely the village roads, sunning grounds, pit-pond sediments, woodland topsoils, courtyard farmlands, courtyard soils and clay wall soils which may be involved in the reconstruction of typical hollow village. Individual pollution index and comprehensive pollution index were used to evaluate the degree of heavy metal pollution according to the relevant national standards in order to provide the basis for safe and rational soil utilization during the hollow village consolidation. The results showed that in the above 7 types of tested soils, except for the pollution index of courtyard farmland was 0.85(pollution level Ⅱ, belong to "less clean" soil, other six types were <0.7(pollution level Ⅰ, belong to "clean" soil, which could be directly used in the hollow village consolidation for reconstruction of topsoil for agriculture. This study revealed the heavy metal pollution condition in the typical soils of plain agricultural areas. It has important reference value to the consolidation of hollow villages scientifically and the reconstruction of safe and high standard farmland.

  1. Heavy metal contamination of soil and water in the vicinity of an abandoned e-waste recycling site: implications for dissemination of heavy metals.

    Science.gov (United States)

    Wu, Qihang; Leung, Jonathan Y S; Geng, Xinhua; Chen, Shejun; Huang, Xuexia; Li, Haiyan; Huang, Zhuying; Zhu, Libin; Chen, Jiahao; Lu, Yayin

    2015-02-15

    Illegal e-waste recycling activity has caused heavy metal pollution in many developing countries, including China. In recent years, the Chinese government has strengthened enforcement to impede such activity; however, the heavy metals remaining in the abandoned e-waste recycling site can still pose ecological risk. The present study aimed to investigate the concentrations of heavy metals in soil and water in the vicinity of an abandoned e-waste recycling site in Longtang, South China. Results showed that the surface soil of the former burning and acid-leaching sites was still heavily contaminated with Cd (>0.39 mg kg(-1)) and Cu (>1981 mg kg(-1)), which exceeded their respective guideline levels. The concentration of heavy metals generally decreased with depth in both burning site and paddy field, which is related to the elevated pH and reduced TOM along the depth gradient. The pond water was seriously acidified and contaminated with heavy metals, while the well water was slightly contaminated since heavy metals were mostly retained in the surface soil. The use of pond water for irrigation resulted in considerable heavy metal contamination in the paddy soil. Compared with previous studies, the reduced heavy metal concentrations in the surface soil imply that heavy metals were transported to the other areas, such as pond. Therefore, immediate remediation of the contaminated soil and water is necessary to prevent dissemination of heavy metals and potential ecological disaster.

  2. HUMAN HEALTH RISK ASSESSMENT: A CASE STUDY OF HEAVY METAL CONTAMINATION OF GARDEN SOILS IN SZEGED

    Directory of Open Access Journals (Sweden)

    ANDREA FARSANG

    2009-06-01

    Full Text Available The soils of the big cities, owing to the various anthropogenic activities, can be contaminated by heavy metals. The surroundings of the roads with heavy traffic as significant metal emitter source can be contaminated by heavy metals. The hobby gardens and the vegetable gardens directly along roads can be potential risky for people since unknown amount of heavy metals can be accumulated into organization of local residents due to consumption of vegetables and fruits grown in their own garden. Most metals are well-known to have toxic characters but we have known little what extent these metals exert influence on people living directly along road with busy traffic. During our research, metal contamination has been investigated in the gardens near the roads with heavy traffic in Szeged by measuring of metal contents in soil and plants samples. Enrichment factor has been calculated with the help of control soil samples far from roads having heavily traffic. Besides determination of the metal content of soil and plant samples, soil properties basically influencing on metal mobility has been examined in order to characterize the buffering capacity of the studied soils. The health risk quotients have also been determined to evaluate human health risk of the contaminated soils.

  3. Speciation and fractionation of heavy metals in soil experimentally contaminated with Pb, Cd, Cu and Zn together and effects on soil negative surface charge

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Speciation of heavy metals in soil subsamplesexperimentally loaded with Pb, Cd, Cu and Zn in orthogonal designwas investigated by sequential extraction, and operationallydefined as water-soluble and exchangeable(SE), weakly specificadsorbed(WSA), Fe and Mn oxides-bound(OX) and organic-bound(ORG).The results show that speciation of heavy metals in the soilsubsamples depended on their kinds. About 90% of Cd and 75% of Znexisted in soil subsamples in the SE fraction. Lead and Cu existedin soil subsamples as SE, WSA and OX fractions simultaneously,although SE was still the major fraction. Organic-bound heavymetals were not clearly apparent in all the soil subsamples. Theconcentration of some heavy metal speciation in soil subsamplesshowed good correlation with ionic impulsion of soil, especiallyfor the SE fraction. Continuous saturation of soil subsamples with0.20 mol/L NH4Cl, which is the first step for determination of thenegative surface charge of soil by the ion retention method, resulted in desorption of certain heavy metals from the soil. Itwas found that the percentage desorption of heavy metals from soilsubsamples depended greatly on pH, the composition and originalheavy metal content of the soil subsamples. However, most of theheavy metals in the soil subsamples were still retained aftermultiple saturation. Compared with the parent soil, the negativesurface charge of soil subsamples loaded with heavy metals did notshow differ significantly from that of the parent one bystatistical analysis. Heavy metals existed in the soil subsamplesmainly as exchangeable and precipitated simultaneously.

  4. THE SIDE-EFFECT OF ORGANIC INSECTICIDE SPINOSAD ON BIOCHEMICAL AND MICROBIOLOGICAL PROPERTIES OF CLAY SOIL

    Directory of Open Access Journals (Sweden)

    Arkadiusz Telesiński

    2015-09-01

    Full Text Available The aim of the study was to determine the effect of spinosad on soil biochemical and microbiological properties. The experiment was carried out on sandy loam with Corg content 10.91 g·kg-l. Spinosad, as Spintor 240 SC was added into soil in dosages: a recommended field dosage, and fivefold, tenfold, and twenty-fivefold higher dosages. The amount of spinosad introduced into soil was between 12.55 and 313.75 g·kg-l. Moreover, soil samples without spinosad supplement were prepared as a reference. Respective Spintor 240 SC doses were converted into 1 kg soil, taking into account 10 cm depth. After application of inse