WorldWideScience

Sample records for heat technology conference

  1. PROCEEDINGS OF THE 1999 OIL HEAT TECHNOLOGY CONFERENCE AND WORKSHOP.

    MCDONALD,R.J.

    1999-04-01

    The 1999 Oil Heat Technology Conference and Workshop, April 15-16 at Brookhaven National Laboratory (BNL) is sponsored by the U. S. Department of Energy, Office of Building Technology, State and Community Programs (DOEBTS). The meeting is also co-sponsored by the: Petroleum Marketers Association of America, New England Fuel Institute, Oilheat Manufacturers Association, National Association of Oil Heat Service Managers, New York State Energy Research and Development Authority, Empire State Petroleum Association, New York Oil Heating Association, Oil Heat Institute of Long Island, and the Pennsylvania Petroleum Association. BNL is proud to acknowledge all of our 1999 co-sponsors, without their help and support the conference would have been canceled due to budget restrictions. It is quite gratifying to see an industry come together to help support an activity like the technology conference, for the benefit of the industry as a whole. The 1999 Oil Heat Technology Conference and Workshop, will be the thirteenth since 1984, is a very valuable technology transfer activity supported by the ongoing Combustion Equipment Technology (Oilheat R and D) program at BNL. The foremost reason for the conference is to provide a platform for the exchange of information and perspectives among international researchers, engineers, manufacturers, service technicians, and marketers of oil-fired space-conditioning equipment. They will provide a conduit by which information and ideas can be exchanged to examine present technologies, as well as helping to develop the future course for oil heating advancement. These conferences also serve as a stage for unifying government representatives, researchers, fuel oil marketers, and other members of the oil-heat industry in addressing technology advancements in this important energy use sector.

  2. PROCEEDINGS OF THE 1998 OIL HEAT TECHNOLOGY CONFERENCE

    MCDONALD,R.J.

    1998-04-01

    The 1998 Oil Heat Technology Conference will be held on April 7--8 at Brookhaven National Laboratory (BNL) under sponsorship by the US Department of Energy, Office of Building Technologies, State and Community Programs (DOE/BTS). The meeting will be held in cooperation with the Petroleum Marketers Association of America (PMAA). The 1998 Oil Heat Technology Conference, will be the twelfth since 1984, is an important technology transfer activity and is supported by the ongoing Combustion Equipment Technology (Oilheat R and D) program at BNL. The reason for the conference is to provide a forum for the exchange of information and perspectives among international researchers, engineers, manufacturers and marketers of oil-fired space-conditioning equipment. They will provide a channel by which information and ideas can be exchanged to examine present technologies, as well as helping to develop the future course for oil heating advancement. These conferences also serve as a stage for unifying government representatives, researchers, fuel oil marketers, and other members of the oil-heat industry in addressing technology advancements in this important energy use sector. The specific objectives of the Conference are to: (1) Identify and evaluate the current state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely; and (2) Foster cooperative interactions among federal and industrial representatives for the common goal of sustained economic growth and energy security via energy conservation.

  3. Proceedings of the 1997 oil heat technology conference and workshop

    McDonald, R.J.

    1997-09-01

    This report documents the Proceedings of the 1997 Oil Heat Technology Conference and Workshop, held on April 3--4 at Brookhaven National Laboratory (BNL), and sponsored by the US Department of Energy--Office of Building Technologies, State and Community programs (DOE-BTS), in cooperation with the Petroleum Marketers Association of America (PMAA). This Conference is a key technology transfer activity supported by the ongoing Combustion Equipment Technology (Oil-Heat R and D) program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space-conditioning equipment. The objectives of the Conference were to: identify and evaluate the state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely: and foster cooperation among federal and industrial representatives with the common goal of sustained national economic growth and energy security via energy conservation. The 1997 Oil Technology Conference comprised: (a) five plenary sessions devoted to presentations and summations by public and private sector industry representatives from the US, and Canada, and (b) four workshops which focused on mainstream issues in oil-heating technology. This book contains 14 technical papers and four summaries from the workshops. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  4. Proceedings of the 1991 Oil Heat Technology Conference and Workshop

    McDonald, R.J.

    1992-07-01

    This Conference, which was the sixth held since 1984, is a key technology-transfer activity supported by the ongoing Combustion Equipment Technology program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space-conditioning equipment. The objectives of the Conference were to: Identify and evaluate the state-of-the-art and recommend; new initiatives to satisfy consumer needs cost-effectively, reliably, and safely; Foster cooperation among federal and industrial representatives with the common goal of national security via energy conservation. The 1991 Oil Technology Conference comprised: (a) two plenary sessions devoted to presentations and summations by public and private sector representatives from the United States, Europe, and Canada; and, (b) four workshops which focused on mainstream issues in oil-heating technology. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

  5. Proceedings of the 1993 oil heat technology conference and workshop

    McDonald, R.J.

    1993-09-01

    This report documents the proceedings of the 1993 Oil Heat Technology Conference and Workshop, held on March 25--26 at Brookhaven National Laboratory (BNL), and sponsored by the US Department of Energy - Office of Building Technologies (DOE-OBT), in cooperation with the Petroleum Marketers Association of America. This Conference, which was the seventh held since 1984, is a key technology-transfer activity supported by the ongoing Combustion Equipment Technology (Oil-Heat R&D) program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space- conditioning equipment. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

  6. Proceedings of the 1996 oil heat technology conference and workshop

    McDonald, R.J.

    1996-07-01

    This Conference is a key technology transfer activity supported by the ongoing Combustion Equipment Technology (Oil-Heat R and D) program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space-conditioning equipment. The objectives of the Conference were to: identify and evaluate the state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely; and foster cooperation among federal and industrial representatives with the common goal of sustained national economic growth and energy security via energy conservation. The 1996 Oil Technology Conference comprised: (a) fourteen technical papers, and (b) four workshops which focused on mainstream issues in oil-heating technology, namely: oilheat research agenda forum; fan atomized burner commercialization, applications, and product development; fuel quality, storage and maintenance--industry discussion; and application of oil heat venting tables, NFPA 31 standard. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  7. Proceedings of the 1998 oil heat technology conference

    McDonald, R.J.

    1998-04-01

    The 1998 Oil Heat Technology Conference was held on April 7--8 at Brookhaven National Laboratory (BNL) under sponsorship by the US Department of Energy, Office of Building Technologies, State and Community Programs (DOE/BTS). The meeting was held in cooperation with the Petroleum Marketers Association of America (PMAA). Fourteen technical presentations was made during the two-day program, all related to oil-heat technology and equipment, these will cover a range of research, developmental, and demonstration activities being conducted within the United States and Canada, including: integrated oil heat appliance system development in Canada; a miniature heat-actuated air conditioner for distributed space conditioning; high-flow fan atomized oil burner (HFAB) development; progress in the development of self tuning oil burners; application of HFAB technology to the development of a 500 watt; thermophotovoltaic (TPV) power system; field tests of the Heat Wise Pioneer oil burner and Insight Technologies AFQI; expanded use of residential oil burners to reduce ambient ozone and particulate levels by conversion of electric heated homes to oilheat; PMAA`s Oil Heat Technician`s Manual (third edition); direct venting concept development; evolution of the chimney; combating fuel related problems; the effects of red dye and metal contamination on fuel oil stability; new standard for above ground and basement residential fuel oil storage; plastic and steel composite secondary contained tanks; and money left on the table: an economic analysis of tank cleaning.

  8. PREFACE: 7th International Conference on Cooling & Heating Technologies (ICCHT 2014)

    2015-09-01

    The Kyoto protocol has initiated a pledge from almost all developing and developed countries to be committed to reducing CO2 emissions. Development of new renewable energy technologies are also of interest in this conference. Greenhouse gases have contributed to global warming and other man-made disasters. Cooling and Heating communities also have responsibilities towards the commitment of reducing the greenhouse gas emissions. In addition, depleting natural resources also act as a threat to the Cooling and Heating industries, causing them to develop highly efficient equipment and innovative technologies. The 1st International Conference on Cooling & Heating Technologies was held in Hanoi Vietnam (Jan. 2005). Whereas the 2nd, 3rd, 4th and 5th ICCHT conferences were held in Dalian, China (Jul. 2006), Tokyo, Japan (Jul. 2007), Jinhae, Korea (Oct. 2008) and Bandung, Indonesia (Dec. 2010) respectively. The 6th International Conference on Cooling & Heating Technologies (ICCTH2012) was held in Xi'an in China on November 9-12, 2012. It is our pleasure to welcome you to the 7th International Conference on Cooling & Heating Technologies (ICCTH2014) on 4th - 6th November 2014 at the Grand Dorsett Subang Hotel, Subang Jaya, Selangor Darul Ehsan, Malaysia The Theme of the Conference is ''Sustainability and Innovation in Heating & Cooling Technologies''. The sub-themes are:- • CO2 Reduction and Low Carbon Technologies • HVAC System and Natural Ventilation • Energy & Alternative Energy • Computational Fluid Dynamics • Low Temperature & Refrigeration Engineering In conjunction with the Conference, an Exhibition will be organized as an integral part of the Conference. Project experiences, product solutions, new applications and state-of-the art information will be highlighted.

  9. VII international district heating conference

    1988-01-01

    The proceedings of the 7th International District Heating Conference contain the full texts of the 89 presented papers of which 11 fall under the INIS Subject Scope. The conference met in seven sessions and dealt with the following problem areas: design and optimization of systems of district heating, integration of the power system and the district heating systems, cooperation of nuclear and fossil burning sources in district heating systems, the use of specific nuclear power plants for heating purposes, questions of the control of systems of district heating, the development of components of heating networks, the reliability and design of heat supply pipes. (Z.M.)

  10. Proceedings: Condenser technology conference

    Tsou, J.L.; Mussalli, Y.G.

    1991-08-01

    Seam surface condenser and associated systems performance strongly affects availability and heat rate in nuclear and fossil power plants. Thirty-six papers presented at a 1990 conference discuss research results, industry experience, and case histories of condenser problems and solutions. This report contains papers on life extension, performance improvement, corrosion and failure analysis, fouling prevention, and recommendation for future R ampersand D. The information represents recent work on condenser problems and solutions to improve the procurement, operation, and maintenance functions of power plant personnel. Several key points follow: A nuclear and a fossil power plant report show that replacing titanium tube bundles improves condenser availability and performance. One paper reports 10 years of experience with enhanced heat transfer tubes in utility condensers. The newly developed enhanced condenser tubes could further improve condensing heat transfer. A new resistance summation method improves the accuracy of condenser performance prediction, especially for stainless steel and titanium tubed condensers. Several papers describe improved condenser fouling monitoring techniques, including a review of zebra mussel issues

  11. 1995 national heat transfer conference: Proceedings. Volume 12: Falling films; Fundamentals of subcooled flow boiling; Compact heat exchanger technology for the process industry; HTD-Volume 314

    Sernas, V.; Boyd, R.D.; Jensen, M.K.

    1995-01-01

    The papers in the first section cover falling films and heat transfer. Papers in the second section address issues associated with heat exchangers, such as: plate-and-frame heat exchanger technology; thermal design issues; condensation; and single-phase flows. The papers in the third section deal with studies related to: the turbulent velocity field in a vertical annulus; the effects of curvature and a dissolved noncondensable gas on nucleate boiling heat transfer; the effects of flow obstruction on the onset of a Ledinegg-type flow instability; pool boiling from a large-diameter tube; and two-dimensional wall temperature distributions and convection in a single-sided heated vertical tube. Separate abstracts were prepared for most papers in this volume

  12. International Containment Technology Conference: Proceedings

    1997-01-01

    This document contains the manuscripts of the papers and posters presented at the 1997 International Containment Technology Conference and Exhibition. These manuscripts represent a valuable compilation of information and data on the environmental challenges and technology-based solutions associated with containment technologies. The purpose of the conference was to promote the advancement of containment technologies by providing a forum from which participants from related disciplines could meet to exchange ideas and information on recent developments. Selected papers were indexed separately for inclusion in the Energy Science and Technology Database

  13. Heat pump technology

    Von Cube, Hans Ludwig; Goodall, E G A

    2013-01-01

    Heat Pump Technology discusses the history, underlying concepts, usage, and advancements in the use of heat pumps. The book covers topics such as the applications and types of heat pumps; thermodynamic principles involved in heat pumps such as internal energy, enthalpy, and exergy; and natural heat sources and energy storage. Also discussed are topics such as the importance of the heat pump in the energy industry; heat pump designs and systems; the development of heat pumps over time; and examples of practical everyday uses of heat pumps. The text is recommended for those who would like to kno

  14. 34th UIT Heat Transfer Conference 2016

    2017-01-01

    The annual UIT Heat Transfer Conference of the “Unione Italiana di Termofluidodinamica” aims at promoting cooperation in the field of heat transfer and thermal sciences, by bringing together scientists and engineers working in related areas. Several issues of interest are addressed, namely natural, forced and mixed convection, conduction, radiation, multi-phase fluid dynamics and interface phenomena, computational fluid dynamics, micro- and nano-scales, efficiency in energy systems, environmental technologies and buildings, heat transfer in fire engineering. The 34th UIT Conference was held in Ferrara (FE), Italy, 4–6 July, 2015 in the spaces of the Scientific and Technological Center of The University of Ferrara. The response has been enthusiastic: 61 abstracts, 36 oral and 18 poster presentations, 48 papers published on the Proceedings To encourage the debate, the Conference Program has scheduled ample poster sessions and invited lectures from the best experts in the field along with a few of the most talented researchers. Keynote Lectures were given by Professor Giovanni S. Barozzi (University of Modena), Professor Paolo Di Marco (University of Pisa) and Professor Nicola Bianco (University of Napoli Federico II). This special volume collects a selection of the scientific contributions discussed during this conference; these works give a good overview of the state-of-the art Italian research in the field of Heat Transfer related topics. I would like to thank sincerely the authors for presenting their works at the conference and in this special issue. I would also like to extend my thanks to the Scientific Committee and the authors for their accurate review process of each paper for this special issue. Special thanks go to the organizing committee. Professor Stefano Piva (president of The Organizing Committee) About UIT (Unione Italiana Termofluidodinamica) The Italian Union of Thermal-Fluid Dynamics (UIT) was founded in Bologna on December 19, 1984

  15. Aerospace Environmental Technology Conference

    Whitaker, A. F. (Editor)

    1995-01-01

    The mandated elimination of CFC's, Halons, TCA, and other ozone depleting chemicals and specific hazardous materials has required changes and new developments in aerospace materials and processes. The aerospace industry has been involved for several years in providing product substitutions, redesigning entire production processes, and developing new materials that minimize or eliminate damage to the environment. These activities emphasize replacement cleaning solvents and their application verifications, compliant coatings including corrosion protection systems, and removal techniques, chemical propulsion effects on the environment, and the initiation of modifications to relevant processing and manufacturing specifications and standards. The Executive Summary of this Conference is published as NASA CP-3297.

  16. Bioenergy '97: Nordic Bioenergy Conference, market, environment and technology

    1997-01-01

    (Leading abstract). The conference ''Bioenergy '97: Nordic Bioenergy Conference, market, environment and technology'' took place in Oslo, Norway, 7-8 Oct 1997. The conference papers are grouped under three headings: (1) The nordic energy market. 12 papers. (2) Production and sale of biofuels. 8 papers. (3) Conversion and utilization of biofuels. With subsections New technologies, 4 papers, and Power/heat production from biofuels, 4 papers

  17. 2005 annual nuclear technology conference

    Anon.

    2005-01-01

    This year's Annual Nuclear Technology Conference of the Deutsches Atomforum and Kerntechnische Gesellschaft was held in Nuremberg on May 10-12, 2005. More than 1 100 participants from eighteen countries make this specialized event one of the largest international conventions in the field of the peaceful uses of nuclear power, whose attendance has steadily increased over the past few years. The first day of the conference was devoted to plenary lectures traditionally dealing mainly with political and economic problems of the use of nuclear power. The partner country of JK 2005 was Switzerland. Traditionally, the program of the three-day conference was organized in the proven format of plenary sessions on the first day, followed by technical sessions, specialized sessions, poster sessions, and special events on the following days. For the third time, the ''Nuclear Campus'' was organized which successfully made the world of nuclear technology transparent to high school and university students in lectures and an exhibition. The meeting was accompanied by a technical exhibition with meeting points of manufacturers, suppliers, and service industries. (orig.)

  18. Conference Proceedings: Profit through technology

    NONE

    1998-12-31

    Advances in, and experiences with, horizontal well technology as one of the principal means of enhancing oil recovery were the themes that animated this international conference in Calgary, organized jointly by the Society of Petroleum Engineers (USA) and the Canadian Institute of Mining, Metallurgy and Petroleum. A total of 47 papers were selected for presentation by the Program Committee of the SPE on the basis of abstracts submitted by authors and these are included in this proceedings volume. Topics range from hydrajet fracturing through field implementation of geological steering techniques, sand control in open hole horizontal wells and improving water flooding efficiency, to steam assisted gravity drainage and chemical flooding through horizontal wells. A number of case histories are presented to illustrate technological advances. The case histories cover a wide range of applications and cover experiences from a number of countries. refs., tabs., figs.

  19. Third Aerospace Environmental Technology Conference

    Whitaker, A. F. (Editor); Cross, D. R. (Editor); Caruso, S. V. (Editor); Clark-Ingram, M. (Editor)

    1999-01-01

    The elimination of CFC's, Halons, TCA, other ozone depleting chemicals, and specific hazardous materials is well underway. The phaseout of these chemicals has mandated changes and new developments in aerospace materials and processes. We are beyond discovery and initiation of these new developments and are now in the implementation phase. This conference provided a forum for materials and processes engineers, scientists, and managers to describe, review, and critically assess the evolving replacement and clean propulsion technologies from the standpoint of their significance, application, impact on aerospace systems, and utilization by the research and development community. The use of these new technologies, their selection and qualification, their implementation, and the needs and plans for further developments are presented.

  20. 20. AINSE plasma science and technology conference. Conference handbook

    NONE

    1995-12-31

    The 20th AINSE plasma science and technology conference was held at Flinders University of South Australia on 13-14 February 1995. Topics under discussion included plasma physics studies, current status of rotamak devices, plasma processing and material studies. The handbook contains the conference program, 54 abstracts and a list of participants.

  1. 20. AINSE plasma science and technology conference. Conference handbook

    1995-01-01

    The 20th AINSE plasma science and technology conference was held at Flinders University of South Australia on 13-14 February 1995. Topics under discussion included plasma physics studies, current status of rotamak devices, plasma processing and material studies. The handbook contains the conference program, 54 abstracts and a list of participants

  2. Fifteenth National Industrial Energy Technology Conference: Proceedings

    1993-01-01

    This year's conference, as in the past, allows upper-level energy managers, plant engineers, utility representatives, suppliers, and industrial consultants to present and discuss novel and innovative ideas on how to reduce costs effectively and improve utilization of resources. Papers are presented on topics that include: Win-win strategies for stability and growth and future success, new generation resources and transmission issues, industry and utilities working together, paper industry innovations, improving energy efficiency, industrial customers and electric utilities regulations, industrial electro technologies for energy conservation and environmental improvement, advances in motors and machinery, industrial energy audits, industrial energy auditing, process improvements, case studies of energy losses, and industrial heat pump applications. Individual papers are indexed separately

  3. Heat-resistant materials 2. Conference proceedings of the 2. international conference on heat-resistant materials

    Natesan, K.; Ganesan, P.; Lai, G.Y.

    1995-01-01

    The Second International Conference on Heat-Resistant Materials was held in Gatlinburg, Tennessee, September 11--14, 1995 and focused on materials performance in cross-cutting technologies where heat resistant materials play a large and sometimes life-and performance-limiting roles in process schemes. The scope of materials for heat-resistant applications included structural iron- and nickel-base alloys, intermetallics, and ceramics. The conference focused on materials development, performance of materials in simulated laboratory and actual service environments on mechanical and structural integrity of components, and state-of-the-art techniques for processing and evaluating materials performance. The three keynote talks described the history of heat-resistant materials, relationship between microstructure and mechanical behavior, and applications of these materials in process schemes. The technical sessions included alloy metallurgy and properties, environmental effects and properties, deformation behavior and properties, relation between corrosion and mechanical properties, coatings, intermetallics, ceramics, and materials for waste incineration. Seventy one papers have been processed separately for inclusion on the data base

  4. 3rd International Conference on Multimedia Technology

    Yang, Jian; Jiao, Feng

    2014-01-01

    Proceedings of the 3rd International Conference on Multimedia Technology (ICMT2013) focuses on both the theory and applications of multimedia technology. The recent advances, new research findings and applications in the fields of theoretical, experimental and applied image & video processing and multimedia technology presented at the conference are brought together in this book. It will serve as a valuable reference for scientists and engineers working in multimedia and related fields. Prof. Aly A. Farag works at the University of Louisville, USA; Prof. Jian Yang works at Tsinghua University, China; Dr. Feng Jiao works at Nanjing University of Information Science & Technology, China.

  5. International Nuclear Science and Technology Conference 2016

    2017-01-01

    Conference Nuclear technology has played an important role in many aspects of our lives, including agriculture, medicine and healthcare, materials, environment, forensics, energy, and frontier advancement. The International Nuclear Science and Technology Conference (INST) aims to bring together scientists, engineers, academics and students to share knowledge and experiences about all aspects of nuclear sciences. INST2016 was the second of the INST conference series organized by Thailand Institute of Nuclear Technology. INST has evolved from a national conference series on nuclear science and technology that was held every two years in Bangkok for over a twenty-year period. INST2016 was held from 4 - 6 August 2016 in Bangkok, Thailand, under the central theme “Nuclear for Better Life”. The conference working language was English. The oral and poster research presentations covered seven major topics: • Nuclear physics and engineering (PHY) • Nuclear and radiation safety (SAF) • Medical and nutritional applications (MED) • Environmental applications (ENV) • Radiation processing and industrial applications (IND) • Agriculture and food applications (AGR) • Instrumentation and other related topics (INS) The welcome addresses, committees, program of the conference and the list of presentations can be found in the PDF. (paper)

  6. 13th International Conference on Information Technology

    2016-01-01

    This book collects articles presented at the 13th International Conference on Information Technology- New Generations, April, 2016, in Las Vegas, NV USA. It includes over 100 chapters on critical areas of IT including Web Technology, Communications, Security, and Data Mining.

  7. The Technology Enhanced Conference - A Board Game!

    Pedersen, Annette

    ITMEDIA at the University of Copenhagen have been working with taking the academic conference online for years. Streaming events, using backchannel chat systems and Twitter, producing introductory pre-event videos, setting up audio debates with keynotes to enrich and prolong the conference...... aid: turning it into a board game simply called The Conference Game. By making a children's board game, we let organizers play around with the options, get an overview – and the game element makes it just a little bit less dangerous, and more fun to play around with new technologies. Reception has...

  8. The 22nd AINSE plasma science and technology conference. Conference handbook

    1999-01-01

    These proceedings contain the extended abstracts of the papers and posters presented at the 22nd AINSE plasma science and technology conference hosted by the Australian National University in Canberra. Topics under discussion included: fusion devices and experiments; plasma production; plasma confinement; plasma heating and current drive; plasma waves; plasma diagnostics; basic collisionless plasma physics; laser produced plasmas and inertial confinement; low-temperature plasmas and interferometry. The individual papers were indexed separately

  9. Proceedings of the third international steam generator and heat exchanger conference

    1998-01-01

    The Third International Steam Generator and Heat Exchanger conference had the objective to present the state of knowledge of steam generator performance and life management, and also heat exchanger technology. As this conference followed on from the previous conferences held in Toronto in 1990 and 1994, the emphasis was on recent developments, particularly those of the last 4 years. The conference provided an opportunity to operators, designers and researchers in the field of steam generation associated with electricity generation by nuclear energy to present their findings and exchange ideas. The conference endeavoured to do this over the widest possible range of subject areas, including: general operating experience, life management and fitness for service strategies, maintenance and inspection, thermalhydraulics, vibration, fretting and fatigue, materials, chemistry and corrosion and the regulatory issues

  10. Proceedings of the third international steam generator and heat exchanger conference

    NONE

    1998-07-01

    The Third International Steam Generator and Heat Exchanger conference had the objective to present the state of knowledge of steam generator performance and life management, and also heat exchanger technology. As this conference followed on from the previous conferences held in Toronto in 1990 and 1994, the emphasis was on recent developments, particularly those of the last 4 years. The conference provided an opportunity to operators, designers and researchers in the field of steam generation associated with electricity generation by nuclear energy to present their findings and exchange ideas. The conference endeavoured to do this over the widest possible range of subject areas,including: general operating experience, life management and fitness for service strategies, maintenance and inspection, thermalhydraulics, vibration, fretting and fatigue, materials, chemistry and corrosion and the regulatory issues.

  11. Proceedings of the joint contractors meeting: FE/EE Advanced Turbine Systems conference FE fuel cells and coal-fired heat engines conference

    Geiling, D.W. [ed.

    1993-08-01

    The joint contractors meeting: FE/EE Advanced Turbine Systems conference FEE fuel cells and coal-fired heat engines conference; was sponsored by the US Department of Energy Office of Fossil Energy and held at the Morgantown Energy Technology Center, P.O. Box 880, Morgantown, West Virginia 26507-0880, August 3--5, 1993. Individual papers have been entered separately.

  12. International Conference on Mobile and Wireless Technology

    Wattanapongsakorn, Naruemon; Joukov, Nikolai

    2016-01-01

    This book presents the peer-reviewed contributions of ICMWT2016, an international conference devoted to mobile and wireless technology. Researchers and professionals from academia and industry met to discuss the cutting-edge developments in the field. The book includes papers on mobile and wireless networks, the increasingly important security issues, data management, as well as the latest developments in mobile software development.

  13. Mediterranean Conference on Information & Communication Technologies 2015

    Choubani, Fethi; Moussati, Ali

    2016-01-01

    This volume presents the first part of the proceedings of the Mediterranean Conference on Information & Communication Technologies (MedICT 2015), which was held at Saidia, Morocco during 7–9 May, 2015. MedICT provides an excellent international forum to the researchers and practitioners from both academia as well as industry to meet and share cutting-edge development. The conference has also a special focus on enabling technologies for societal challenges, and seeks to address multidisciplinary challenges in Information & Communication Technologies such as health, demographic change, wellbeing, security and sustainability issues. The proceedings publish high quality papers which are closely related to the various theories, as well as emerging and practical applications of particular interest to the ICT community. This first volume provides a compact yet broad view of recent developments in devices, technologies and processing, and covers recent research areas in the field including Microwave Devices...

  14. Proceedings: 2003 Radiation Protection Technology Conference

    2004-01-01

    Health physics professionals within the nuclear industry are continually upgrading their programs with new methods and technologies. The Third Annual EPRI Radiation Protection Technology Conference facilitated this effort by communicating technical developments, program improvements, and experience throughout the nuclear power industry. When viewed from the perspective of shorter outages, diminishing numbers of contract RP technicians and demanding emergent work, this information flow is critical for the industry

  15. 7th International Conference on Sensing Technology

    Mukhopadhyay, Subhas; Jayasundera, Krishanthi

    2015-01-01

    This book contains a collection of selected works stemming from the 2013 International Conference on Sensing Technology (ICST), which was held in Wellington, New Zealand. The purpose of the book is to distill the highlights of the conference, and therefore track the latest developments in sensing technologies. The book contents are broad, since sensors can be applied in many different areas. Therefore the book gives a broad overview of the latest developments, in addition to discussing the process through which researchers go through in order to develop sensors, or related systems, which will become more widespread in the future.The book is written for academic and industry professionals working in the field of sensing, instrumentation and related fields, and is positioned to give a snapshot of the current state of the art in sensing technology, particularly from the applied perspective. 

  16. Second annual clean coal technology conference: Proceedings

    1993-01-01

    The Second Annual Clean Coal Technology Conference was held at Atlanta, Georgia, September 7--9, 1993. The Conference, cosponsored by the US Department of Energy (USDOE) and the Southern States Energy Board (SSEB), seeks to examine the status and role of the Clean Coal Technology Demonstration Program (CCTDP) and its projects. The Program is reviewed within the larger context of environmental needs, sustained economic growth, world markets, user performance requirements and supplier commercialization activities. This will be accomplished through in-depth review and discussion of factors affecting domestic and international markets for clean coal technology, the environmental considerations in commercial deployment, the current status of projects, and the timing and effectiveness of transfer of data from these projects to potential users, suppliers, financing entities, regulators, the interested environmental community and the public. Individual papers have been entered separately

  17. International Conference on Mechanical Engineering and Technology

    Mechanical Engineering and Technology

    2012-01-01

    The volume includes a set of selected papers extended and revised from the 2011 International Conference on Mechanical Engineering and Technology, held on London, UK, November 24-25, 2011.   Mechanical engineering technology is the application of physical principles and current technological developments to the creation of useful machinery and operation design. Technologies such as solid models may be used as the basis for finite element analysis (FEA) and / or computational fluid dynamics (CFD) of the design. Through the application of computer-aided manufacturing (CAM), the models may also be used directly by software to create "instructions" for the manufacture of objects represented by the models, through computer numerically controlled (CNC) machining or other automated processes, without the need for intermediate drawings.   This volume covers the subject areas of mechanical engineering and technology, and also covers interdisciplinary subject areas of computers, communications, control and automation...

  18. 2006 annual nuclear technology conference Aachen

    Anon.

    2006-01-01

    This year's ANNUAL NUCLEAR TECHNOLOGY CONFERENCE (JK) was organized in Aachen by the Deutsches Atomforum e.V. (DAtF) and the Kerntechnische Gesellschaft e.V. (KTG). The attendance by more than 1,200 participants from 17 nations underlines the role of this specialized congress as one of the leading events in the field of nuclear power use. For several years in a row, the number of participants has been increasing steadily. The first conference day offered plenary presentations traditionally dealing mainly with political and economic issues of the use of nuclear power, including a presentation by the President of the DAtF. The lead countries of JK 2006 were Belgium and Finland with contributions to the plenary day and special meetings on selected topics. The traditional proven scheme of the three-day meeting offered plenary sessions on the first day, and technical sessions, topical sessions, poster sessions, and special events on the following days. The 'Nuclear Power Campus' was run most successfully for the fourth time, presenting to high school students and university freshmen the world of nuclear power in a transparent way. The special commitment to the young generation was stressed at JK 2006 also by the 'Competence Preservation in Nuclear Technology' workshop. Nearly 2 dozen young scientists used the forum to present results of their work. The meeting was accompanied by a technical exhibition with meeting points established by vendors, suppliers, and service providers. (orig.)

  19. Information and Communication Technologies Innovations conference

    Kocarev, Ljupco

    2012-01-01

    Information and Communication Technologies has enlarged its horizon and it is practiced under multidisciplinary contexts that introduce new challenges to theoretical and technical approaches. The most critical benefit of introducing new ICT technologies in our real world living are the new ways of working that the online world makes possible. Complexity, uncertainty and scaling issues of real world problems as well as natural phenomena in ecology, medicine and biology demanding ICT assistance create challenging application domains for artificial intelligence, decision support and intelligence systems, wireless sensor networks, pervasive and ubiquitous computing, multimedia information systems, data management systems, internet and web applications and services, computer networks, security and cryptography, distributed systems, GRID and cloud computing. This book offers a collection of papers presented at the Third International Conference on ICT Innovations held in September 2011, in Skopje, Macedonia. The co...

  20. No Heat Spray Drying Technology

    Beetz, Charles [ZoomEssence, Inc., Hebron, KY (United States)

    2016-06-15

    No Heat Spray Drying Technology. ZoomEssence has developed our Zooming™ spray drying technology that atomizes liquids to powders at ambient temperature. The process of drying a liquid into a powder form has been traditionally achieved by mixing a heated gas with an atomized (sprayed) fluid within a vessel (drying chamber) causing the solvent to evaporate. The predominant spray drying process in use today employs air heated up to 400° Fahrenheit to dry an atomized liquid into a powder. Exposing sensitive, volatile liquid ingredients to high temperature causes molecular degradation that negatively impacts solubility, stability and profile of the powder. In short, heat is detrimental to many liquid ingredients. The completed award focused on several areas in order to advance the prototype dryer to a commercial scale integrated pilot system. Prior to the award, ZoomEssence had developed a prototype ‘no-heat’ dryer that firmly established the feasibility of the Zooming™ process. The award focused on three primary areas to improve the technology: (1) improved ability to formulate emulsions for specific flavor groups and improved understanding of the relationship of emulsion properties to final dry particle properties, (2) a new production atomizer, and (3) a dryer controls system.

  1. Heat transfer 1990. Proceedings of the ninth international heat transfer conference

    Hetsroni, G.

    1990-01-01

    This book contains the proceedings of the Ninth International Heat Transfer Conference. Included in Volume 3 are the following chapters: Refrigerant vapor condensation on a horizontal tube bundle. Local heat transfer in a reflux condensation inside a closed two-phase thermosyphon and surface temperature by means of a pulsed photothermal effects

  2. National conference on environmental remediation science and technology: Abstracts

    NONE

    1998-12-31

    This conference was held September 8--10, 1998 in Greensboro, North Carolina. The purpose of this conference was to provide a multidisciplinary forum for exchange of state-of-the-art information on methods and site characterization technologies for environmental monitoring and remedial action planning of hazardous materials. This report contains the abstracts of sixty-one papers presented at the conference.

  3. Third annual women in science and technology conference

    1992-12-31

    This report presents discussions presented at the conference for women in science and technology. Topics include balancing careers with the family, choices concerning graduate schools, and sexual harassment.

  4. Third annual women in science and technology conference

    1992-01-01

    This report presents discussions presented at the conference for women in science and technology. Topics include balancing careers with the family, choices concerning graduate schools, and sexual harassment.

  5. Bioenergy `97: Nordic Bioenergy Conference, market, environment and technology; Bioenergi `97: nordisk bioenergikonferanse, marked, miljoe og teknikk

    NONE

    1997-12-31

    (Leading abstract). The conference ``Bioenergy `97: Nordic Bioenergy Conference, market, environment and technology`` took place in Oslo, Norway, 7-8 Oct 1997. The conference papers are grouped under three headings: (1) The nordic energy market. 12 papers. (2) Production and sale of biofuels. 8 papers. (3) Conversion and utilization of biofuels. With subsections New technologies, 4 papers, and Power/heat production from biofuels, 4 papers

  6. Bioenergy `97: Nordic Bioenergy Conference, market, environment and technology; Bioenergi `97: nordisk bioenergikonferanse, marked, miljoe og teknikk

    NONE

    1998-12-31

    (Leading abstract). The conference ``Bioenergy `97: Nordic Bioenergy Conference, market, environment and technology`` took place in Oslo, Norway, 7-8 Oct 1997. The conference papers are grouped under three headings: (1) The nordic energy market. 12 papers. (2) Production and sale of biofuels. 8 papers. (3) Conversion and utilization of biofuels. With subsections New technologies, 4 papers, and Power/heat production from biofuels, 4 papers

  7. 2nd International Conference on Photonics, Optics and Laser Technology

    Raposo, Maria

    2016-01-01

    This collection of the selected papers presented to the Second International Conference on Photonics, Optics and laser technology PHOTOPTICS 2014 covers the three main conference scientific areas of “Optics”, “Photonics” and “Lasers”. The selected papers, in two classes full and short, result from a double blind review carried out by conference Program Committee members who are highly qualified experts in the conference topic areas.

  8. 3rd International Conference on Photonics, Optics and Laser Technology

    Raposo, Maria

    2016-01-01

    The book provides a collection of selected papers presented to the third International Conference on Photonics, Optics and Laser Technology PHOTOPTICS 2015, covering the three main conference scientific areas of “Optics”, “Photonics” and “Lasers”. The selected papers, in two classes full and short, result from a double blind review carried out by the conference program committee members which are highly qualified experts in conference topic areas.

  9. The 9th international conference on computing and information technology

    Unger, Herwig; Boonkrong, Sirapat; IC2IT2013

    2013-01-01

    This volume contains the papers of the 9th International Conference on Computing and Information Technology (IC2IT 2013) held at King Mongkut's University of Technology North Bangkok (KMUTNB), Bangkok, Thailand, on May 9th-10th, 2013. Traditionally, the conference is organized in conjunction with the National Conference on Computing and Information Technology, one of the leading Thai national events in the area of Computer Science and Engineering. The conference as well as this volume is structured into 3 main tracks on Data Networks/Communication, Data Mining/Machine Learning, and Human Interfaces/Image processing.  

  10. Proceedings of the 5th nuclear science and technology conference

    NONE

    1994-11-01

    The 5th conference on nuclear science and technology was held on 21-23 November, 1992 in Bangkok. This conference contain papers on non-power applications of nuclear technology in medicine, agriculture and industry. These application including irradiation of food for desinfestation; tram technologies used in diagnosis and therapy and radiation chemistry important to industrial processes. Some technologies which evolved from the development of the nuclear power industry are also discussed.

  11. Proceedings of the 6th nuclear science and technology conference

    NONE

    1996-12-01

    The 6th conference on nuclear science and technology was held on 2 - 4 December, 1996 in Bangkok. This conference contain papers on non-power applications of nuclear technology in medicine, agriculture and industry. These application include irradiation of food for des infestation; tram technologies used in diagnosis and therapy and radiation chemistry important to industrial processes. Some technologies which evolved from the development of nuclear power industry are also discussed

  12. Proceedings of the 5th nuclear science and technology conference

    1994-11-01

    The 5th conference on nuclear science and technology was held on 21-23 November, 1992 in Bangkok. This conference contain papers on non-power applications of nuclear technology in medicine, agriculture and industry. These application including irradiation of food for desinfestation; tram technologies used in diagnosis and therapy and radiation chemistry important to industrial processes. Some technologies which evolved from the development of the nuclear power industry are also discussed

  13. Proceedings of the 7. Nuclear Science and Technology Conference

    NONE

    1998-12-01

    The 7. conference on nuclear science and technology was held on 1-2 December 1998 in Bangkok. This conference contain papers on non-power applications of nuclear technology in medicine, agriculture and industry. These application include irradiation of food for disinfestation; tram technologies used in diagnosis and therapy and radiation chemistry important to industrial processes. Some technologies which evolved from the development of nuclear power industry are also discussed

  14. PREFACE: 31st UIT (Italian Union of Thermo-fluid-dynamics) Heat Transfer Conference 2013

    Vitali, Luigi; Niro, Alfonso; Colombo, Luigi; Sotgia, Giorgio

    2014-04-01

    The annual Conference of the ''Unione Italiana di Termofluidodinamica'' (UIT) aims at promoting cooperation in the field of heat transfer and thermal sciences, by bringing together scientists and engineers working in related areas. The 31st UIT Conference was held in Moltrasio (Como), Italy, 25-27 June, 2013 at the Grand Hotel Imperiale. The response has been enthusiastic, with more than 70 quality contributions from 224 authors on heat transfer related topics: natural, forced and mixed convection, conduction, radiation, multi-phase fluid dynamics and interface phenomena, computational fluid dynamics, micro- and nano-scales, efficiency in energy systems, environmental technologies and buildings. To encourage the debate, the Conference Program has scheduled ample poster sessions and invited lectures from the best experts in the field along with a few of the most talented researchers. Keynote Lectures were given by Professor Roberto Mauri (University of Pisa), Professor Lounés Tadrist (Polytech Marseille) and Professor Maurizio Quadrio (Politecnico di Milano). This special volume collects a selection of the scientific contributions discussed during this conference; these works give a good overview of the state-of-the art Italian research in the field of Heat Transfer related topics. I would like to thank sincerely the authors for presenting their works at the conference and in this special issue. I would also like to extend my thanks to the Scientific Committee and the authors for their accurate review process of each paper for this special issue. Special thanks go to the organizing committee and to our sponsors. As a professor of Politecnico di Milano, let me say I am very proud to have been the chair of this conference in the 150th anniversary of my university. Professor Alfonso Niro Details of organizers, sponsors and committees, as well as further information, are available in the PDF

  15. Conference on "Mathematical Technology of Networks"

    2015-01-01

    Bringing together leading researchers in the fields of functional analysis, mathematical physics and graph theory, as well as natural scientists using networks as a tool in their own research fields, such as neuroscience and machine learning, this volume presents recent advances in functional, analytical, probabilistic, and spectral aspects in the study of graphs, quantum graphs, and complex networks. The contributors to this volume explore the interplay between theoretical and applied aspects of discrete and continuous graphs. Their work helps to close the gap between different avenues of research on graphs, including metric graphs and ramified structures. All papers were presented at the conference "Mathematical Technology of Networks," held December 4–7, 2013 at the Zentrum für interdisziplinäre Forschung (ZiF) in Bielefeld, Germany, and are supplemented with detailed figures illustrating both abstract concepts as well as their real-world applications. Dynamical models on graphs or random graphs a...

  16. Tenth Biennial Coherent Laser Radar Technology and Applications Conference

    Kavaya, Michael J. (Compiler)

    1999-01-01

    The tenth conference on coherent laser radar technology and applications is the latest in a series beginning in 1980 which provides a forum for exchange of information on recent events current status, and future directions of coherent laser radar (or lidar or lader) technology and applications. This conference emphasizes the latest advancement in the coherent laser radar field, including theory, modeling, components, systems, instrumentation, measurements, calibration, data processing techniques, operational uses, and comparisons with other remote sensing technologies.

  17. Accelerator driven transmutation technologies conference wrap-up

    Favale, A.J. [Grumman Aerospace Corporation, Las Vegas, NV (United States)

    1995-10-01

    This presentation is the viewgraphs used by the author to summarize the highlights of the presentations made at the conference. No article was available for this presentation. The author highlights what he felt were the major highlights of this conference. He looks at the conference in terms of five major areas which he encompases in terms of general questions: why are they needed?; what technologies are involved?; what countries have shown interest?; what are the issues?; and what are the underlying drivers?

  18. 6th Krakow-Winnipeg Conference on Advanced Bioimaging Technologies

    2011-09-01

    Starting from 1997 researchers have been meet in Krakow, Poland for the Krakow-Winnipeg conference on MRI. The scope of the conference includes the latest technical advances in biomedical imaging including molecular imaging and nanotechnology. Other topics for presentation include recent developments in whole body MRI, multi-transmit technology and gradient-free MRI. Book of Abstracts from the 6 th Conference contains 29 abstracts of Oral Presentations and 11 abstracts of Posters.

  19. PREFACE: 32nd UIT (Italian Union of Thermo-fluid-dynamics) Heat Transfer Conference

    2014-11-01

    The annual Conference of the ''Unione Italiana di Termofluidodinamica'' (UIT) aims to promote cooperation in the field of heat transfer and thermal sciences by bringing together scientists and engineers working in related areas. The 32nd UIT Conference was held in Pisa, from the 23rd to the 25th of June, 2014 in the buildings of the School of Engineering, just a few months after the celebration of the 100th anniversary of the first Institution of the School of Engineering at the University of Pisa. The response was very good, with more than 100 participants and 80 high-quality contributions from 208 authors on seven different heat transfer related topics: Heat transfer and efficiency in energy systems, environmental technologies, and buildings (25 papers); Micro and nano scale thermo-fluid dynamics (9 papers); Multi-phase fluid dynamics, heat transfer and interface phenomena (14 papers); Computational fluid dynamics and heat transfer (10 papers); Heat transfer in nuclear plants (8 papers); Natural, forced and mixed convection (10 papers) and Conduction and radiation (4 papers). To encourage the debate, the Conference Program scheduled 16 oral sessions (44 papers), three ample poster sessions (36 papers) and four invited lectures given by experts in the various fields both from Industry and from University. Keynote Lectures were given by Dr. Roberto Parri (ENEL, Italy), Prof. Peter Stephan (TU Darmstadt, Germany), Prof. Bruno Panella (Politecnico di Torino), and Prof. Sara Rainieri (Universit;aacute; di Parma). This special volume collects a selection of the scientific contributions discussed during this conference. A total of 46 contributions, two keynote lectures and 44 papers both from oral and poster sessions, have been selected for publication in this special issue, after a second accurate revision process. These works give a good overview of the state of the art of Italian research in the field of Heat Transfer related topics at the date. The editors of the

  20. International Conference on Physics and Technology of Reactors and Applications

    2011-01-01

    Full text : The international conference on physics and technology of reactors is organized by the Moroccan Association for Nuclear enggineering and Reactor Technology (GMTR) with the collaboration of the Centre for Energy and Nuclear Sciences and Techniques (CNESTEN) and under the auspices of the ministry of Energy, Mining, Water and Environment. The programme of the PHYTRA2 conference covers a wide variety of topics. The conference is organised in one plenary session, eight oral technical sessions and one poster session. The oral and poster technical sessions covers the usual topics of nuclear engineering including one session on research reactors utilisation and computational methods for research reactors

  1. 2015 International Conference on Information Technology and Intelligent Transportation Systems

    Jain, Lakhmi; Zhao, Xiangmo

    2017-01-01

    This volume includes the proceedings of the 2015 International Conference on Information Technology and Intelligent Transportation Systems (ITITS 2015) which was held in Xi’an on December 12-13, 2015. The conference provided a platform for all professionals and researchers from industry and academia to present and discuss recent advances in the field of Information Technology and Intelligent Transportation Systems. The presented information technologies are connected to intelligent transportation systems including wireless communication, computational technologies, floating car data/floating cellular data, sensing technologies, and video vehicle detection. The articles focusing on intelligent transport systems vary in the technologies applied, from basic management systems to more application systems including topics such as emergency vehicle notification systems, automatic road enforcement, collision avoidance systems and some cooperative systems. The conference hosted 12 invited speakers and over 200 part...

  2. International conference on Advances in Engineering Technologies and Physical Science

    Ao, Sio-Iong; Rieger, Burghard; IAENG Transactions on Engineering Technologies : Special Edition of the World Congress on Engineering and Computer Science 2011

    2013-01-01

    This volume contains thirty revised and extended research articles written by prominent researchers participating in an international conference in engineering technologies and physical science and applications. The conference serves as good platforms for the engineering community to meet with each other and to exchange ideas. The conference has also struck a balance between theoretical and application development. The conference is truly international meeting with a high level of participation from many countries. Topics covered include chemical engineering, circuits, communications systems, control theory, engineering mathematics, systems engineering, manufacture engineering, and industrial applications. The book offers the state of art of tremendous advances in engineering technologies and physical science and applications, and also serves as an excellent reference work for researchers and graduate students working with/on engineering technologies and physical science and applications.

  3. Proceedings of the twenty third national heat and mass transfer conference and first international ISHMT-ASTFE heat and mass transfer conference: souvenir and book of abstracts

    2015-01-01

    The conference covered various aspects of heat and mass transfer like Aero-thermodynamics, Atmospheric flows, Biological heat and mass transfer, Combustion and reactive flows, Cryogenics, Electronic and photonic cooling, Energy engineering, Environmental engineering, Experimental techniques, Heat transfer enhancement, Heat transfer equipment's, Heat transfer in nuclear applications, Mass transfer, Materials processing and manufacturing, Microscale and nanoscale transport, Multiphase transport and phase change, Multi mode heat transfer, Numerical methods, Refrigeration and air conditioning, Space heat transfer, Transport phenomena in porous media, and Turbulent transport. Papers relevant to INIS are indexed separately

  4. 2016 China Academic Conference on Printing, Packaging Engineering & Media Technology

    Ouyang, Yun; Xu, Min; Yang, Li; Ouyang, Yujie

    2017-01-01

    This book includes a selection of reviewed papers presented at the 2016 China Academic Conference on Printing, Packaging Engineering & Media Technology, held on November 25-27, 2016 in Xi’an, China. The conference was jointly organized by China Academy of Printing Technology, Xi’an University of Technology and Stuttgart Media University of Germany. The proceedings cover the recent outcomes on color science and technology, image processing technology, digital media technology, digital process management technology in packaging and packaging etc. They will be of interest to university researchers, R&D engineers and graduate students in graphic communications, packaging, color science, image science, material science, computer science, digital media and network technology fields.

  5. 4th International Conference on Applied Computing and Information Technology

    2017-01-01

    This edited book presents scientific results of the 4th International Conference on Applied Computing and Information Technology (ACIT 2016) which was held on December 12–14, 2016 in Las Vegas, USA. The aim of this conference was to bring together researchers and scientists, businessmen and entrepreneurs, teachers, engineers, computer users, and students to discuss the numerous fields of computer science and to share their experiences and exchange new ideas and information in a meaningful way. The aim of this conference was also to bring out the research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them. The conference organizers selected the best papers from those papers accepted for presentation at the conference. The papers were chosen based on review scores submitted by members of the Program Committee, and underwent further rigorous rounds of review. Th...

  6. 3rd Annual Disruptive Technology Conference

    2006-09-07

    Panel -- The Warfighter’s Perspective The Impact of Disruptive Technologies on Joint Warfighting MG Michael Vane, USA, Vice Director for Force...Structure, Resources & Assessment, Joint Staff, J-8 Panel -- Perspectives of Change: Identifying the Emerging Commercial Disruptive Technologies Decision...Mark Lucas, Board Member OSGeo, RadiantBlue Technologies Panel -- The Search for Disruptive Technologies - a “Blue Force” Multiplier Advanced

  7. EU-Korea Conference on Science and Technology

    Lee, Jehyun

    2011-01-01

    Current research fields in science and technology were presented and discussed at the EKC2009, informing about the interests and directions of the scientists and engineers in EU countries and Korea. The Conference has emerged from the idea of bringing together EU and Korea to get to know each other better, especially in fields of science and technology.

  8. 2. International conference on nuclear technologies of XXI centuries. Abstracts

    Yakushev, A.P.

    2010-01-01

    The collection contains abstracts of the II International conference 'Nuclear technologies of the XXI century' on energy problems in the world, the prospects for nuclear power plant in Belarus, the various technological, technical and economic aspects of nuclear safety of NPP and nuclear reactions and international cooperation. The materials published in electronic form.

  9. Proceedings: Radiation Protection Technology Conference: Providence, RI, November 2001

    2002-01-01

    Health physics (HP) professionals within the nuclear industry are continually upgrading their respective programs with new methods and technologies. The move to shorter outages combined with a diminishing group of contract HP technicians and demanding emergent work makes such changes even more important. The EPRI Radiation Protection Technology Conference focused on a number of key health physics issues and developments

  10. 2015 Federated Conference on Software Development and Object Technologies

    Kostolny, Jozef; Gratkowski, Tomasz

    2017-01-01

    This book presents the proceedings of the International Conference SDOT which was organized at the University in Žilina, Faculty of Management Sciences and Informatics, Slovak Republic in November 19, 2015. The conference was truly international both in terms of the amount of foreign contributions and in terms of composition of steering and scientific committees. The book and the conference serves as a platform of professional exchange of knowledge and experience for the latest trends in software development and object-oriented technologies (theory and practice). This proceedings present information on the latest developments and mediate the exchange of experience between practitioners and academia. .

  11. 7th KES International Conference on Intelligent Decision Technologies

    Jain, Lakhmi; Howlett, Robert

    2015-01-01

    This book presents the 57 papers accepted for presentation at the Seventh KES International Conference on Intelligent Decision Technologies (KES-IDT 2015), held in Sorrento, Italy, in June 2015. The conference consists of keynote talks, oral and poster presentations, invited sessions and workshops on the applications and theory of intelligent decision systems and related areas. The conference provides an opportunity for the presentation and discussion of interesting new research results, promoting knowledge transfer and the generation of new ideas. The book will be of interest to all those whose work involves the development and application of intelligent decision systems.

  12. International Conference on Information Technology and Agricultural Engineering (ICITAE 2011)

    Sambath, Sabo; Information Technology and Agricultural Engineering

    2012-01-01

    This volume comprises the papers from 2011 International Conference on Information Technology and Agricultural Engineering (ICITAE 2011).  2011 International Conference on Information Technology and Agricultural Engineering (ICITAE 2011) has been held in Sanya, China, December 1-2, 2011. All the papers have been peer reviewed by the selected experts. These papers represent the latest development in the field of materials manufacturing technology, spanning from the fundamentals to new technologies and applications. Specially, these papers cover the topics of Information Technology and Agricultural Engineering. This book provides a greatly valuable reference for researchers in the field of Information Technology and Agricultural Engineering who wish to further understand the underlying mechanisms and create innovative and practical techniques, systems and processes. It should also be particularly useful for engineers in information technology and agriculture who are responsible for the efficient and effective ...

  13. Visions for a sustainable world: A conference on science, technology and social responsibility. Conference report

    1992-12-31

    This report summarizes the organization, activities, and outcomes of Student Pugwash USA`s 1992 International Conference, Visions for a Sustainable World: A Conference on Science, Technology and Social Responsibility. The conference was held June 14--20, 1992 at Emory University, and brought together 94 students and over 65 experts from industry, academe, and government. The conference addressed issues ranging from global environmental cooperation to the social impacts of the Human Genome Project to minority concerns in the sciences. It provided a valuable forum for talented students and professionals to engage in critical dialogue on many interdisciplinary issues at the juncture of science, technology and society. The conference challenged students -- the world`s future scientists, engineers, and political leaders -- to think broadly about global problems and to devise policy options that are viable and innovative. The success of the conference in stimulating interest, understanding, and enthusiasm about interdisciplinary global issues is clearly evident from both the participants` feedback and their continued involvement in Student Pugwash USA programs. Six working groups met each morning. The working group themes included: environmental challenges for developing countries; energy options: their social and environmental impact; health care in developing countries; changing dynamics of peace and global security; educating for the socially responsible use of technology; ethics and the use of genetic information. The conference was specifically designed to include mechanisms for ensuring its long-term impact. Participants were encouraged to focus on their individual role in helping resolve global issues. This was achieved through each participant`s development of a Personal Plan of Action, a plan which mapped out activities the student could undertake after the conference to continue the dialogue and work towards the resolution of global and local problems.

  14. International Conference on Recent Developments and Applications of Nuclear Technologies - Conference Abstracts

    Zakrzewska-Trznadel, G.

    2008-01-01

    The aim of the Conference was to offer an opportunity to interchange views and experiences, as well as to present the state of the art and modern trends concerning research and applications in the field of nuclear technologies. It was hoped that the Conference may fill up the gap on the field of information about possibilities and results of the application of nuclear technologies in modern economy of the 21 century, particularly in: industry, food processing, heritage preservation, environmental protection, homeland security and health protection. One session, with invited lectures, was entirely devoted to modern nuclear technologies for power generation. Conference participants presented 7 plenary lectures, 68 oral communications in 8 sessions and 98 posters

  15. Aerospace Environmental Technology Conference: Exectutive summary

    Whitaker, A. F. (Editor)

    1995-01-01

    The mandated elimination of CFC's, Halons, TCA, and other ozone depleting chemicals and specific hazardous materials has required changes and new developments in aerospace materials and processes. The aerospace industry has been involved for several years in providing product substitutions, redesigning entire production processes, and developing new materials that minimize or eliminate damage to the environment. These activities emphasize replacement cleaning solvents and their application verifications, compliant coatings including corrosion protection systems, and removal techniques, chemical propulsion effects on the environment, and the initiation of modifications to relevant processing and manufacturing specifications and standards. The papers from this conference are being published in a separate volume as NASA CP-3298.

  16. International Conference on Advances in Information and Communication Technology

    Nguyen, Thanh-Thuy; Vu, Duc-Thai; Phung, Trung-Nghia; Huynh, Van-Nam

    2017-01-01

    This book features papers presented at the International Conference on Advances in Information and Communication Technology (ICTA 2016), which was held in Thai Nguyen city, Vietnam, from December 1 to 13, 2016. The conference was jointly organized by Thai Nguyen University of Information and Communication Technology (ICTU), the Institute of Information Technology – Vietnam Academy of Science and Technology (IoIT), Feng Chia University, Taiwan (FCU), the Japan Advanced Institute of Science and Technology (JAIST) and the National Chung Cheng University, Taiwan (CCU) with the aim of bringing together researchers, academics, practitioners and students to not only share research results and practical applications but also to foster collaboration in information and communication technology research and education. The book includes the 66 best peer-reviewed papers, selected from the 150 submissions received.

  17. II International Conference on Plasma and Laser Research and Technologies

    Kurnaev, V A; Dodulad, E I

    2016-01-01

    II Conference on Plasma and Laser Research and Technologies took place on January 25 th until January 27 th , 2016 at National Research Nuclear University “MEPhI” (NRNU MEPhI). It was organized by the Institute of Laser and Plasma Technologies and was supported by the Competitiveness Program of NRNU MEPhI. The Conference consisted of four sections: Plasma physics and controlled nuclear fusion, Laser physics, Modern aspects of solid state matter physics and Charged particle accelerators. The Conference provided participants an opportunity to present their research results for the consideration of a wide audience from the sidelines of science. The main topics of the Conference were: • Controlled nuclear fusion with magnetic and inertial confinement; • Low-temperature plasma and its application in modern technology; • Laser physics and technologies for industry, environmental control and precise measurements; • Optical information control, holography, spintronics and photonics; • Modern aspects of solid state matter physics and nanophysics; • Charged particle accelerators. More than 200 specialists on plasma, laser and solid state physics took part in the II Conference. They represented leading Russian scientific research centres and universities (such as Troitsk Institute of Innovative and Thermonuclear Research, Institute of Crystallography, National Research Centre 'Kurchatov Institute', Institute of Physical Chemistry and Electrochemistry and others) and universities from Belarus, Ukraine, Germany, USA, Canada, Belgium, and Sweden. All report presentations were broadcasted online on the NRNU MEPhI official site. The translation was watched by viewers from Moscow, Prague, St. Petersburgh and other cities, who could not attend the Conference. We would like to thank heartily all of the speakers, participants and organizing committee members for their contribution to the conference. (paper)

  18. CCTC 2009 : 2nd Climate Change Technology Conference

    2009-01-01

    The 2nd Climate Change Technology Conference (CCTC2009) was held in Hamilton, Ontario, Canada on May 12-15, 2009. CCTC2009 is a Canadian/International forum for engineers, scientists, policy advisors, industry and other stakeholders to share new information and ideas for dealing with climate change and global warming. It also provided an opportunity for participants to keep abreast of emerging techniques and technologies for the mitigation of and adaptation to, the impacts of climate change. The conference theme: 'Climate Change ..... Deal with It!' emphasized the need to develop practical engineering and administrative responses to address the impacts of climate change and global warming.

  19. International Conference on Information and Communication Technology for Intelligent Systems

    Das, Swagatam

    2016-01-01

    This volume contains 60 papers presented at ICTIS 2015: International Conference on Information and Communication Technology for Intelligent Systems. The conference was held during 28th and 29th November, 2015, Ahmedabad, India and organized communally by Venus International College of Technology, Association of Computer Machinery, Ahmedabad Chapter and Supported by Computer Society of India Division IV – Communication and Division V – Education and Research. This volume contains papers mainly focused on ICT and its application for Intelligent Computing, Cloud Storage, Data Mining, Image Processing and Software Analysis etc.

  20. Proceedings of the 33rd national heat transfer conference NHTC'99

    Jensen, M.K.; Di Marzo, M.

    1999-01-01

    The papers in this conference were divided into the following sections: Radiation Heat Transfer in Fires; Computational Fluid Dynamics Methods in Two-Phase Flow; Heat Transfer in Microchannels; Thin Film Heat Transfer; Thermal Design of Electronics; Enhanced Heat Transfer I; Porous Media Convection; Contact Resistance Heat Transfer; Materials Processing in Solidification and Crystal Growth; Fundamentals of Combustion; Challenging Modeling Aspects of Radiative Transfer; Fundamentals of Microscale Transport; Laser Processing and Diagnostics for Manufacturing and Materials Processing; Experimental Studies of Multiphase Flow; Enhanced Heat Transfer II; Heat and Mass Transfer in Porous Media; Heat Transfer in Turbomachinery and Gas Turbine Systems; Conduction Heat Transfer; General Papers; Open Forum on Combustion; Combustion and Instrumentation and Diagnostics I; Radiative Heat Transfer and Interactions in Participating and Nonparticipating Media; Applications of Computational Heat Transfer; Heat Transfer and Fluid Aspects of Heat Exchangers; Two-Phase Flow and Heat Transfer Phenomena; Fundamentals of Natural and Mixed Convection Heat Transfer I; Fundamental of Natural and Mixed Convection Heat Transfer II; Combustion and Instrumentation and Diagnostics II; Computational Methods for Multidimensional Radiative Transfer; Process Heat Transfer; Advances in Computational Heat and Mass Transfer; Numerical Methods for Porous Media; Transport Phenomena in Manufacturing and Materials Processing; Practical Combustion; Melting and Solidification Heat Transfer; Transients in Dynamics of Two-Phase Flow; Basic Aspects of Two-Phase Flow; Turbulent Heat Transfer; Convective Heat Transfer in Electronics; Thermal Problems in Radioactive and Mixed Waste Management; and Transport Phenomena in Oscillatory Flows. Separate abstracts were prepared for most papers in this conference

  1. Characterization and Metrology for ULSI Technology: 1998 International Conference. Proceedings

    Seiler, D.G. [NIST, Gaithersburg, MD 20899 (United States); Diebold, A.C. [SEMATECH, Austin, TX 78741 (United States); Bullis, W.M. [SEMI, Mountain View, CA 94043 (United States); Schaffner, T.J. [Texas Instruments, Dallas, TX 75221 (United States); McDonald, R. [Intel Corp., Santa Clara, CA 95050 (United States); Walters, E.J. [NIST, Gaithersburg, MD 20899 (United States)

    1998-11-01

    These proceedings represent papers presented at the 1998 International Conference on Characterization and Metrology for ULSI Technology (INIST) in March 1998. The Conference reviewed important semiconductor techniques that are crucial to continued advancements in the semiconductor industry. It brought together leaders, scientists, and engineers concerned with all aspects of the technology and characterization techniques for silicon research. The topics covered included front end processes consisting of modeling, materials, gate dielectrics, doping and wafer issues. Interconnects were discussed in detail including deposition technology. Lithography and patterning was also discussed. Finally, packaging/assembly of the integrated circuits and materials characterization including dopant profiling was discussed. The papers provide an effective portrayal of industry characterization needs and point out some of the problems that must be addressed by industry, academia, and government to continue the dramatic progress in semiconductor technology. There were 141 papers included in these proceedings, out of which 9 have been abstracted for the Energy,Science and Technology database.(AIP)

  2. III International Conference on Laser and Plasma Researches and Technologies

    2017-12-01

    A.P. Kuznetsov and S.V. Genisaretskaya III Conference on Plasma and Laser Research and Technologies took place on January 24th until January 27th, 2017 at the National Research Nuclear University "MEPhI" (NRNU MEPhI). The Conference was organized by the Institute for Laser and Plasma Technologies and was supported by the Competitiveness Program of NRNU MEPhI. The conference program consisted of nine sections: • Laser physics and its application • Plasma physics and its application • Laser, plasma and radiation technologies in industry • Physics of extreme light fields • Controlled thermonuclear fusion • Modern problems of theoretical physics • Challenges in physics of solid state, functional materials and nanosystems • Particle accelerators and radiation technologies • Modern trends of quantum metrology. The conference is based on scientific fields as follows: • Laser, plasma and radiation technologies in industry, energetic, medicine; • Photonics, quantum metrology, optical information processing; • New functional materials, metamaterials, “smart” alloys and quantum systems; • Ultrahigh optical fields, high-power lasers, Mega Science facilities; • High-temperature plasma physics, environmentally-friendly energetic based on controlled thermonuclear fusion; • Spectroscopic synchrotron, neutron, laser research methods, quantum mechanical calculation and computer modelling of condensed media and nanostructures. More than 250 specialists took part in the Conference. They represented leading Russian scientific research centers and universities (National Research Centre "Kurchatov Institute", A.M. Prokhorov General Physics Institute, P.N. Lebedev Physical Institute, Troitsk Institute for Innovation and Fusion Research, Joint Institute for Nuclear Research, Moscow Institute of Physics and Tecnology and others) and leading scientific centers and universities from Germany, France, USA, Canada, Japan. We would like to thank heartily all of

  3. 3rd International Conference on Intelligent Technologies and Engineering Systems

    2016-01-01

    This book includes the original, peer reviewed research from the 3rd International Conference on Intelligent Technologies and Engineering Systems (ICITES2014), held in December, 2014 at Cheng Shiu University in Kaohsiung, Taiwan. Topics covered include: Automation and robotics, fiber optics and laser technologies, network and communication systems, micro and nano technologies, and solar and power systems. This book also Explores emerging technologies and their application in a broad range of engineering disciplines Examines fiber optics and laser technologies Covers biomedical, electrical, industrial, and mechanical systems Discusses multimedia systems and applications, computer vision and image & video signal processing.

  4. 2014 World Conference on Information Systems and Technologies

    Correia, Ana; Tan, Felix; Stroetmann, Karl

    2014-01-01

    This book contains a selection of articles from The 2014 World Conference on Information Systems and Technologies (WorldCIST'14), held between the 15th and 18th of April in Funchal, Madeira, Portugal, a global forum for researchers and practitioners to present and discuss recent results and innovations, current trends, professional experiences and challenges of modern Information Systems and Technologies research, technological development and applications. The main topics covered are: Information and Knowledge Management; Organizational Models and Information Systems; Intelligent and Decision Support Systems; Software Systems, Architectures, Applications and Tools; Computer Networks, Mobility and Pervasive Systems; Radar Technologies; Human-Computer Interaction; Health Informatics; and Information Technologies in Education.

  5. Proceedings of the conference on recent advances in information technology

    1999-10-01

    Twentieth century has witnessed remarkable advancements that have brought out lasting changes in all the fields of science and technology. The most important advancements are in the field of information technology (IT), which has revolutionized the entire fabric of our life, including nuclear science and technology. It is clear that IT will continue to be one of the fertile areas for scientific and technological developments and this conference proceedings deal with the latest trends in IT applied to information centres dealing with nuclear technology. Papers relevant to INIS are indexed separately

  6. A review of magnetic heat pump technology

    Barclay, J.A.

    1990-01-01

    The area of technology classified as heat pumps generally refers to refrigerators, heat pumps and heat engines. This review is restricted to the literature on magnetic refrigerators and magnetic heat pumps which are referred to interchangeably. Significant progress has been made on the development of engineering prototypes of cryogenic, nonregenerative magnetic refrigerators utilizing conductive heat transfer in the 0.1 K to 20 K temperature range. Advances have also been made in analysis of regenerative magnetic refrigerators and heat pumps utilizing the active magnetic regeneration (AMR) concept. Units based on AMR are being modeled, designed and/or built to operate in various temperature ranges including 1.8-4.5 K, 4-15 K, 15-85 K, and 270-320 K. The near room temperature units have been scaled to 50 kW as both refrigerators and heat pumps. The progress of magnetic refrigeration over the last three years is summarized and discussed

  7. Fourteenth National Industrial Energy Technology Conference: Proceedings

    1992-01-01

    Presented are many short articles on various aspects of energy production, use, and conservation in industry. The impacts of energy efficient equipment, recycling, pollution regulations, and energy auditing are discussed. The topics covered include: New generation sources and transmission issues, superconductivity applications, integrated resource planning, electro technology research, equipment and process improvement, environmental improvement, electric utility management, and recent European technology and conservation opportunities. Individual papers are indexed separately

  8. Radiofrequency plasma heating: proceedings

    Swenson, D.G.

    1985-01-01

    The conference proceedings include sessions on Alfven Wave Heating, ICRF Heating and Current Drive, Lower Hybrid Heating and Current Drive, and ECRF Heating. Questions of confinement, diagnostics, instabilities and technology are considered. Individual papers are cataloged separately

  9. The 4th Nuclear Science and Technology Conference. Proceedings

    1992-01-01

    This conference includes papers on a broad range of applications for nuclear technologies. Some of the topics covered are the electron beam and its applications, nuclear applications in industry, nuclear power in Japan, radiobiology for the environment, significant developments in nuclear medicine and nuclear applications in agriculture

  10. 5th Conference on Aerospace Materials, Processes, and Environmental Technology

    Cook, M. B. (Editor); Stanley, D. Cross (Editor)

    2003-01-01

    Records are presented from the 5th Conference on Aerospace Materials, Processes, and Environmental Technology. Topics included pollution prevention, inspection methods, advanced materials, aerospace materials and technical standards,materials testing and evaluation, advanced manufacturing,development in metallic processes, synthesis of nanomaterials, composite cryotank processing, environmentally friendly cleaning, and poster sessions.

  11. International Conference on Systems, Control and Information Technologies 2016

    Kaliczyńska, Małgorzata

    2017-01-01

    This book presents the proceedings of the International Conference on Systems, Control and Information Technologies 2016. It includes research findings from leading experts in the fields connected with INDUSTRY 4.0 and its implementation, especially: intelligent systems, advanced control, information technologies, industrial automation, robotics, intelligent sensors, metrology and new materials. Each chapter offers an analysis of a specific technical problem followed by a numerical analysis and simulation as well as the implementation for the solution of a real-world problem.

  12. 2nd International Conference on Intelligent Technologies and Engineering Systems

    Chen, Cheng-Yi; Yang, Cheng-Fu

    2014-01-01

    This book includes the original, peer reviewed research papers from the 2nd International Conference on Intelligent Technologies and Engineering Systems (ICITES2013), which took place on December 12-14, 2013 at Cheng Shiu University in Kaohsiung, Taiwan. Topics covered include: laser technology, wireless and mobile networking, lean and agile manufacturing, speech processing, microwave dielectrics, intelligent circuits and systems, 3D graphics, communications, and structure dynamics and control.

  13. 3rd International Conference on Computer & Communication Technologies

    Bhateja, Vikrant; Raju, K; Janakiramaiah, B

    2017-01-01

    The book is a compilation of high-quality scientific papers presented at the 3rd International Conference on Computer & Communication Technologies (IC3T 2016). The individual papers address cutting-edge technologies and applications of soft computing, artificial intelligence and communication. In addition, a variety of further topics are discussed, which include data mining, machine intelligence, fuzzy computing, sensor networks, signal and image processing, human-computer interaction, web intelligence, etc. As such, it offers readers a valuable and unique resource.

  14. International Conference on Intelligent Technologies and Engineering System (ICITES 2012)

    Huang, Yi-Cheng; Intelligent Technologies and Engineering Systems

    2013-01-01

    This book concentrates on intelligent technologies as it relates to engineering systems. The book covers the following topics: networking, signal processing, artificial intelligence, control and software engineering, intelligent electronic circuits and systems, communications, and materials and mechanical engineering. The book is a collection of original papers that have been reviewed by technical editors. These papers were presented at the International Conference on Intelligent Technologies and Engineering Systems, held Dec. 13-15, 2012.

  15. International Conference on Emerging Trends in Science, Engineering and Technology

    Caroline, B; Jayanthi, J

    2012-01-01

    The present book is based on the research papers presented in the International Conference on Emerging Trends in Science, Engineering and Technology 2012, held at Tiruchirapalli, India. The papers presented bridges the gap between science, engineering and technology. This book covers a variety of topics, including mechanical, production, aeronautical, material science, energy, civil and environmental energy, scientific management, etc. The prime objective of the book is to fully integrate the scientific contributions from academicians, industrialists and research scholars.

  16. Second annual clean coal technology conference: Proceedings

    1993-01-01

    This report contains paper on the following topics: coal combustion/coal processing; advanced electric power generation systems; combined nitrogen oxide/sulfur dioxide control technologies; and emerging clean coal issues and environmental concerns. These paper have been cataloged separately elsewhere

  17. International Conference on Computers and Advanced Technology in Education

    Advanced Information Technology in Education

    2012-01-01

    The volume includes a set of selected papers extended and revised from the 2011 International Conference on Computers and Advanced Technology in Education. With the development of computers and advanced technology, the human social activities are changing basically. Education, especially the education reforms in different countries, has been experiencing the great help from the computers and advanced technology. Generally speaking, education is a field which needs more information, while the computers, advanced technology and internet are a good information provider. Also, with the aid of the computer and advanced technology, persons can make the education an effective combination. Therefore, computers and advanced technology should be regarded as an important media in the modern education. Volume Advanced Information Technology in Education is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of computers and advanced technology in education to d...

  18. International Conference on Materials Science and Technology (ICMST 2012)

    Joseph, Ginson P.

    2015-02-01

    FROM THE CONVENOR'S DESK The Department of Physics, St. Thomas College Pala, is highly privileged to organize an International Conference on Materials Science and Technology (ICMST 2012) during 10-14 June 2012, and as Convenor of the conference it is with legitimate pride and immense gratitude to God that I remember the most enthusiastic responses received for this from scientists all over the world. In a time of tremendous revolutionary changes in Materials Science and Technology, it is quite in keeping with the tradition of a pioneering institute that St. Thomas College is, to have risen to the occasion to make this conference a reality. We have no doubt that this proved to be a historic event, a real breakthrough, not only for us the organizers but also for all the participants. A conference of this kind provides a nonpareil, a distinctly outstanding platform for the scholars, researchers and the scientists to discuss and share ideas with delegates from all over the world. This had been most fruitful to the participants in identifying new collaborations and strengthening existing relations. That experts of diverse disciplines from across the world were sitting under one roof for five days, exchanging views and sharing findings, was a speciality of this conference. The event has evoked excellent responses from all segments of the Materials Science community worldwide. 600 renowned scholars from 28 countries participated in this. We were uniquely honoured to have Prof. C.N.R. Rao, Chairman, Scientific Advisory Council to the Prime Minister of India, to inaugurate this conference. May I take this opportunity to thank all those who have contributed their valuable share, diverse in tone and nature, in the making of this conference. My whole hearted gratitude is due to the international and national members of the advisory committee for their valuable guidance and involvement. I place on record my heartfelt gratitude to our sponsors. I am sure that this conference has

  19. 7th International Conference on Sensing Technology

    Mukhopadhyay, Subhas; Jayasundera, Krishanthi

    2015-01-01

    This book is written for academic and industry professionals working in the field of sensing, instrumentation and related fields, and is positioned to give a snapshot of the current state of the art in sensing technology, particularly from the applied perspective. The book is intended to give broad overview of the latest developments, in addition to discussing the process through which researchers go through in order to develop sensors, or related systems, which will become more widespread in the future.

  20. Second annual clean coal technology conference: Proceedings. Volume 1

    1993-09-09

    The Second Annual Clean Coal Technology Conference was held at Atlanta, Georgia, September 7--9, 1993. The Conference, cosponsored by the US Department of Energy (USDOE) and the Southern States Energy Board (SSEB), seeks to examine the status and role of the Clean Coal Technology Demonstration Program (CCTDP) and its projects. The Program is reviewed within the larger context of environmental needs, sustained economic growth, world markets, user performance requirements and supplier commercialization activities. This will be accomplished through in-depth review and discussion of factors affecting domestic and international markets for clean coal technology, the environmental considerations in commercial deployment, the current status of projects, and the timing and effectiveness of transfer of data from these projects to potential users, suppliers, financing entities, regulators, the interested environmental community and the public. Individual papers have been entered separately.

  1. 5th International Conference on Sustainable Automotive Technologies

    Subic, Aleksandar; Trufin, Ramona

    2014-01-01

    This book captures selected peer reviewed papers presented at the 5th International Conference on Sustainable Automotive Technologies, ICSAT 2013, held in Ingolstadt, Germany. ICSAT is the state-of-the-art conference in the field of new technologies for transportation. The book brings together the work of international researchers and practitioners under the following interrelated headings: fuel transportation and storage, material recycling, manufacturing and management costs, engines and emission reduction. The book provides a very good overview of research and development activities focused on new technologies and approaches capable of meeting the challenges to sustainable mobility. About the Editors: Prof. Dr. Jörg Wellnitz is the Dean of the Faculty of Mechanical Engineering, Technische Hochschule Ingolstadt, Germany. Prof. Dr. Aleksandar Subic is the Head of the School of Aerospace, Mechanical and Manufacturing Engineering, RMIT University, Australia. Ramona Trufin, M.A. is the coordinator of the Facul...

  2. International Conference on Information and Communication Technology for Sustainable Development

    Joshi, Amit; Modi, Nilesh; Pathak, Nisarg

    2016-01-01

    The two volumes of this book collect high-quality peer-reviewed research papers presented in the International Conference on ICT for Sustainable Development (ICT4SD 2015) held at Ahmedabad, India during 3 – 4 July 2015. The book discusses all areas of Information and Communication Technologies and its applications in field for engineering and management. The main focus of the volumes are on applications of ICT for Infrastructure, e-Governance, and contemporary technologies advancements on Data Mining, Security, Computer Graphics, etc. The objective of this International Conference is to provide an opportunity for the researchers, academicians, industry persons and students to interact and exchange ideas, experience and expertise in the current trend and strategies for Information and Communication Technologies.

  3. International Conference on Physics and Technology of Reactors and Applications

    2007-01-01

    The first international conference on physics and technology of reactors and applications (PHYTRA 1) which took place in Marrakech (Morocco) from 14 to 16 March 2007, was designed to bring together scientists, teachers and students from universities, research centres and industry and other institutions to exchange knowledge and to discuss ideas and future issues. The programmes of the PHYTRA 1 conference covers a wide variety topics, the conference was organised in three plenary sessions, ten oral technical sessions and two poster sessions. The plenary sessions covers the following topics : The prospects of nuclear energy, The situation of nuclear sciences and energy in Morocco and Africa, and the new development in reactor physics and reactor design [fr

  4. Technology 2002: The Third National Technology Transfer Conference and Exposition, volume 1

    Hackett, M.

    1993-02-01

    The proceedings from the conference are presented. The topics covered include the following: computer technology, advanced manufacturing, materials science, biotechnology, and electronics. Separate abstracts have been prepared for articles from this report

  5. 11th International Conference on Computing and Information Technology

    Meesad, Phayung; Boonkrong, Sirapat

    2015-01-01

    This book presents recent research work and results in the area of communication and information technologies. The book includes the main results of the 11th International Conference on Computing and Information Technology (IC2IT) held during July 2nd-3rd, 2015 in Bangkok, Thailand. The book is divided into the two main parts Data Mining and Machine Learning as well as Data Network and Communications. New algorithms and methods of data mining asr discussed as well as innovative applications and state-of-the-art technologies on data mining, machine learning and data networking.

  6. 9th International Conference on Advanced Computing & Communication Technologies

    Mandal, Jyotsna; Auluck, Nitin; Nagarajaram, H

    2016-01-01

    This book highlights a collection of high-quality peer-reviewed research papers presented at the Ninth International Conference on Advanced Computing & Communication Technologies (ICACCT-2015) held at Asia Pacific Institute of Information Technology, Panipat, India during 27–29 November 2015. The book discusses a wide variety of industrial, engineering and scientific applications of the emerging techniques. Researchers from academia and industry present their original work and exchange ideas, information, techniques and applications in the field of Advanced Computing and Communication Technology.

  7. 1st International Conference on Data Engineering and Communication Technology

    Bhateja, Vikrant; Joshi, Amit

    2017-01-01

    This two-volume book contains research work presented at the First International Conference on Data Engineering and Communication Technology (ICDECT) held during March 10–11, 2016 at Lavasa, Pune, Maharashtra, India. The book discusses recent research technologies and applications in the field of Computer Science, Electrical and Electronics Engineering. The aim of the Proceedings is to provide cutting-edge developments taking place in the field data engineering and communication technologies which will assist the researchers and practitioners from both academia as well as industry to advance their field of study.

  8. 5th International Conference OTEH 2012 - defense technology (Proceedings review

    Vlado Petar Đurković

    2013-02-01

    Full Text Available This article gives an overview of all papers and events at the Fifth International ScientificConference on Defense Technologies OTEH 2012 held in Belgrade, in the Military Technical Institute (VTI, from 18th to 19th September 2012.The paper review presents the Conference Sections by subjects and guest-lectureres as well as the institutions of all authors who actively participated at the Conference.About the ConferenceThe Fifth International Scientific Conference on Defense Technologies OTEH 2012  was held in Belgrade in the Military Technical Institute in Žarkovo, from 18th to 19thSeptember 2012..The Conference program was organized in two plenary sessions and a working part which took place in four halls.In the plenary session, two key lectures were held by eminent experts from abroad. The first lecture entitled „An adaptive remeshing technique for 3D crack growth simulations”, was given by Dr Vincent Chiaruttini (ONERA Institute, Paris, France. The second one, „New Technologies for Advanced Defence Systems”, was held by Dr Filippo Neri (Virtualabs Company, Rome, Italy.Fifteen sessions were organised at the Conference. The authors presented their works in open discussions answering questions from the audience. The average number of attendees at each session was about 40.The papers were sorted by topic areas:Aerodynamics and flight dynamics: 12 papersAircraft: 23 papersWeapon systems, ammunition, energy materials, combat vehicles: 29 papersIntegrated sensor systems and robotic systems: 16 papersTelecommunication and information systems: 18 papersMaterials and technologies: 34 papersQuality, standardization, metrology, maintenance and exploitation: 11 papersOut of 163 submitted papers for this Conference, 145 papers were accepted and distributed in an electronic form on CDs to the present authors, co-authors, guests and invitees to the Conference. The number of participants with authors and co-authors was impressive - 243. The

  9. 2006 annual nuclear technology conference - opening address

    Hohlefelder, W.

    2006-01-01

    The Energy Summit organized by Federal Chancellor Merkel set the right course in energy research. The funds to be made available by the federal government for energy research and innovation are to be raised by more than 30% by 2009. However, the Red-Green ban on research into reactor development still needs to be lifted. For Germany, 2005 was a year of change. As far as energy policy is concerned, it was a year more of disenchantment, as the diametrally opposed positions held by CDU/CSU and SPD in matters nuclear mean that, for the time being, the current regulations about residual plant lifetimes will continue to be valid. The Energy Summit as the first round in a process at the end of which, in 2007, there is to be a complete energy policy concept for the next few decades, does raise hopes. Clear emphasis must be given to worldwide developments, however. The assumption that others would follow Germany's 'good' example in opting out of the use of nuclear power has turned out to be naive. Ultimate clarity about which technology will turn out to be a bridge or an interim technology will be obtained in retrospect only. We should buy time now by extending nuclear power plant life so as to be able later to decide more freely about our options. The repository question, which is still considered a point of dispute, is less a technical than a political problem. The sequence of steps to be taken for solution is outlined in great detail and with high precision in the nuclear agreement. Following the ruling by the Lueneburg higher administrative court, Konrad can be installed and commissioned by 2013. After handling the so-called points of doubt, exploration of Gorleben can be completed. Nuclear power is an important building block in the energy mix in peaceful coexistence of various energy resources in accordance with their respective possible uses. For this reason, the renewables and nuclear power should no longer by played off one against the other. Both of them have a

  10. Proceedings of the 1999 Review Conference on Fuel Cell Technology

    None Available

    2000-06-05

    The 1999 Review Conference on Fuel Cell Technology was jointly sponsored by the U.S. Department of Energy, Federal Energy Technology Center (FETC), the Gas Research Institute (GRI), and the Electric Power Research Institute (EPRI). It was held August 3 to 5 in Chicago, Illinois. The goal of this conference was to provide a forum for reviewing fuel cell research and development (R&D) programs, assist in strategic R&D planning, promote awareness of sponsor activities, and enhance interactions between manufacturers, researchers, and stakeholders. This conference was attended by over 250 representatives from industry, academia, national laboratories, gas and electric utilities, DOE, and other Government agencies. The conference agenda included a keynote session, five presentation sessions, a poster presentation reception, and three breakout sessions. The presentation session topics were DOD Fuel Cell Applications, Low-Temperature Fuel Cell Manufacturers, Low-Temperature Component Research, High-Temperature Fuel Cell Manufacturers, and High-Temperature Component Research; the breakout session topics were Future R&D Directions for Low-Temperature Fuel Cells, Future R&D Directions for High-Temperature Fuel Cells, and a plenary summary session. All sessions were well attended.

  11. Fiscal 1993 investigational report on heat pump heat storage technology; 1993 nendo heat pump chikunetsu gijutsu ni kansuru chosa hokokusho

    NONE

    1994-03-01

    This project is for an investigation into the heat pump (HP) use heat storage technology, with the aim of clarifying the present status of HP heat storage technology, the utilization status, and the developmental trend of technology and of contributing to the spread of heat energy effective use using HP heat storage technology and to the promotion of the technical development. Accordingly, the evaluation of the following was made: sensible heat (SH), latent heat (LH), chemical heat storage technology (CH), and heat storage technology (HS). Investigations were made on the sensible heat use heat storage technology of water, brine, stone, soil, etc. in terms of SH; the phase change sensible heat use heat storage technology of ice, hydrate salt, paraffins, etc. in terms of LH; hydration, hydroxide, 2-propanol pyrolysis, adsorption of silica gel, zeolite and water, and heat storage technology using metal hydride, etc. in terms of CH. In terms of HS, the following were studied and evaluated from the study results of the heat storage system in which HP is applied to the sensible heat and latent heat type heat storage technology: contribution to the power load levelling and the reduction of heat source capacity, heat recovery and the use of unused energy, improvement of the system efficiency by combining HP and heat storage technology. 24 refs., 242 figs., 56 tabs.

  12. Ceramic Technology for Advanced Heat Engines Project

    1989-08-01

    The Ceramic Technology for Advanced Heat Engines Project was developed by the Department of Energy's Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Advanced Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DoD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially.

  13. 36th International Conference on Information Systems Architecture and Technology

    Grzech, Adam; Świątek, Jerzy; Wilimowska, Zofia

    2016-01-01

    This four volume set of books constitutes the proceedings of the 36th International Conference Information Systems Architecture and Technology 2015, or ISAT 2015 for short, held on September 20–22, 2015 in Karpacz, Poland. The conference was organized by the Computer Science and Management Systems Departments, Faculty of Computer Science and Management, Wroclaw University of Technology, Poland. The papers included in the proceedings have been subject to a thorough review process by highly qualified peer reviewers. The accepted papers have been grouped into four parts: Part I—addressing topics including, but not limited to, systems analysis and modeling, methods for managing complex planning environment and insights from Big Data research projects. Part II—discoursing about topics including, but not limited to, Web systems, computer networks, distributed computing, and multi-agent systems and Internet of Things. Part III—discussing topics including, but not limited to, mobile and Service Oriented Archi...

  14. 2016 37th International Conference Information Systems Architecture and Technology

    Grzech, Adam; Świątek, Jerzy; Wilimowska, Zofia

    2017-01-01

    This four volume set of books constitutes the proceedings of the 2016 37th International Conference Information Systems Architecture and Technology (ISAT), or ISAT 2016 for short, held on September 18–20, 2016 in Karpacz, Poland. The conference was organized by the Department of Management Systems and the Department of Computer Science, Wrocław University of Science and Technology, Poland. The papers included in the proceedings have been subject to a thorough review process by highly qualified peer reviewers. The accepted papers have been grouped into four parts: Part I—addressing topics including, but not limited to, systems analysis and modeling, methods for managing complex planning environment and insights from Big Data research projects. Part II—discoursing about topics including, but not limited to, Web systems, computer networks, distributed computing, and mulit-agent systems and Internet of Things. Part III—discussing topics including, but not limited to, mobile and Service Oriented Architect...

  15. 5th International Conference on Advanced Manufacturing Engineering and Technologies

    Jakovljevic, Zivana; NEWTECH2017

    2017-01-01

    This book presents the proceedings from the 5th NEWTECH conference (Belgrade, Serbia, 5–9 June 2017), the latest in a series of high-level conferences that bring together experts from academia and industry in order to exchange knowledge, ideas, experiences, research results, and information in the field of manufacturing. The range of topics addressed is wide, including, for example, machine tool research and in-machine measurements, progress in CAD/CAM technologies, rapid prototyping and reverse engineering, nanomanufacturing, advanced material processing, functional and protective surfaces, and cyber-physical and reconfigurable manufacturing systems. The book will benefit readers by providing updates on key issues and recent progress in manufacturing engineering and technologies and will aid the transfer of valuable knowledge to the next generation of academics and practitioners. It will appeal to all who work or conduct research in this rapidly evolving field.

  16. 5th Conference on Information Technologies in Biomedicine

    Badura, Pawel; Kawa, Jacek; Wieclawek, Wojciech

    2016-01-01

    ITiB’2016 is the 5th Conference on Information Technologies in Biomedicine organized by the Department of Informatics & Medical Equipment of Silesian University of Technology every other year. The Conference is under the auspices of the Committee on Biocybernetics and Biomedical Engineering of the Polish Academy of Sciences. The meeting has become a recognized event that helps to bridge the gap between methodological achievements in engineering and clinical requirements in medical diagnosis, therapy, and rehabilitation. Mathematical information analysis, computer applications together with medical equipment and instruments have become standard tools underpinning the current rapid progress with developing Computational Intelligence. Members of academic societies of technical and medical background present their research results and clinical implementations. This proceedings (divided in 2 volumes) include the following sections: Ø Image Processing Ø Signal Processing Ø Medical Information System & ...

  17. The 1992 World Administrative Radio Conference: Technology and Policy Implications

    1993-05-01

    As the 20th century draws to a close, new radio technologies and services are poised to change the ways we communicate. Radio waves already make possible a wide range of services considered commonplace--AM and FM radio broadcasting, television, cellular telephones, remote garage-door openers, and baby monitors. Advances in radio technology are giving birth to even more new products and services, including pocket-sized telephones that may allow people to make and receive calls anywhere in the world, high-definition televisions (HDTV) with superior quality pictures and sound, and static-free digital radios. The 1992 World Administrative Radio Conference (WARC-92) authorized frequencies for many of these new radio communication services, and granted additional frequencies for many existing services, including international broadcasting, satellite-based mobile communications, and communications in space. The effects of these changes will be felt well into the 21st century as countries around the world develop and deploy new communications systems to serve the needs of consumers, businesses, and governments. For the United States, the decisions made at the conference will critically affect how we develop new radio technologies and applications, how competitive this country will be in radio communications equipment and services, and how effectively the United States can exercise its role as a leader in world radio communication policymaking. This study of the outcomes and implications of WARC-92 was requested by the House Committee on Energy and Commerce and the Senate Committee on Commerce, Science, and Transportation. OTA was asked to evaluate the success of U.S. proposals at the conference, discuss the implications of the decisions made for U.S. technology and policy development, and identify options for improving U.S. participation in future world radio communication conferences.

  18. Proceedings of the 1989 Carnahan conference on security technology

    DeVore, R.W.

    1989-01-01

    This book contains the proceedings of the 1989 Carnahan conference on security technology and crime countermeasures. Topics covered include: study of methods for the enhancement of classified document control and protection; research and development of a portable microfocus x-ray system capable of providing ultra-high resolution images of improvised explosive devices; and BombCAD - a CAD-based technique for assessing bomb vulnerability and designing and evaluating bomb defense measures

  19. 2nd International Conference on Mobile and Wireless Technology

    Wattanapongsakorn, Naruemon

    2015-01-01

    This book provides a snapshot of the current state-of-the-art in the fields of mobile and wireless technology, security and applications.  The proceedings of the 2nd International Conference on Mobile and Wireless Technology (ICMWT2015), it represents the outcome of a unique platform for researchers and practitioners from academia and industry to share cutting-edge developments in the field of mobile and wireless science technology, including those working on data management and mobile security.   The contributions presented here describe the latest academic and industrial research from the international mobile and wireless community.  The scope covers four major topical areas: mobile and wireless networks and applications; security in mobile and wireless technology; mobile data management and applications; and mobile software.  The book will be a valuable reference for current researchers in academia and industry, and a useful resource for graduate-level students working on mobile and wireless technology...

  20. 2016 World Conference on Information Systems and Technologies

    Correia, Ana; Adeli, Hojjat; Reis, Luis; Teixeira, Marcelo

    2016-01-01

    This book contains a selection of articles from The 2016 World Conference on Information Systems and Technologies (WorldCIST'16), held between the 22nd and 24th of March at Recife, Pernambuco, Brazil. WorldCIST is a global forum for researchers and practitioners to present and discuss recent results and innovations, current trends, professional experiences and challenges of modern Information Systems and Technologies research, together with their technological development and applications. The main topics covered are: Information and Knowledge Management; Organizational Models and Information Systems; Software and Systems Modeling; Software Systems, Architectures, Applications and Tools; Multimedia Systems and Applications; Computer Networks, Mobility and Pervasive Systems; Intelligent and Decision Support Systems; Big Data Analytics and Applications; Human-Computer Interaction; Health Informatics; Information Technologies in Education; Information Technologies in Radiocommunications.

  1. 2015 World Conference on Information Systems and Technologies

    Correia, Ana; Costanzo, Sandor; Reis, Luis

    2015-01-01

    This book contains a selection of articles from The 2015 World Conference on Information Systems and Technologies (WorldCIST'15), held between the 1st and 3rd of April in Funchal, Madeira, Portugal, a global forum for researchers and practitioners to present and discuss recent results and innovations, current trends, professional experiences and challenges of modern Information Systems and Technologies research, technological development and applications. The main topics covered are: Information and Knowledge Management; Organizational Models and Information Systems; Intelligent and Decision Support Systems; Big Data Analytics and Applications; Software Systems, Architectures, Applications and Tools; Multimedia Systems and Applications; Computer Networks, Mobility and Pervasive Systems; Human-Computer Interaction; Health Informatics; Information Technologies in Education; Information Technologies in Radiocommunications.

  2. 4th International Conference on Sustainable Automotive Technologies

    Wellnitz, Jörg; Leary, Martin; Koopmans, Lucien

    2012-01-01

    The book on Sustainable Automotive Technologies aims to draw special attention to the research and practice focused on new technologies and approaches capable of meeting the challenges to sustainable mobility. In particular, the book features incremental and radical technical advancements that are able to meet social, economic and environmental targets in both local and global contexts. These include original solutions to the problems of pollution and congestion, vehicle and public safety, sustainable vehicle design and manufacture, new structures and materials, new power-train technologies and vehicle concepts. In addition to vehicle technologies, the book is also concerned with the broader systemic issues such as sustainable supply chain systems, integrated logistics and telematics, and end-of-life vehicle management. It captures selected peer reviewed papers accepted for presentation at the 4th International Conference on Sustainable Automotive Technologies, ICSAT2012, held at the RMIT, Melbourne, Australi...

  3. 10th International Conference on Computing and Information Technology

    Unger, Herwig; Meesad, Phayung

    2014-01-01

    Computer and Information Technology (CIT) are now involved in governmental, industrial, and business domains more than ever. Thus, it is important for CIT personnel to continue academic research to improve technology and its adoption to modern applications. The up-to-date research and technologies must be distributed to researchers and CIT community continuously to aid future development. The 10th International Conference on Computing and Information Technology (IC 2 IT2014) organized by King Mongkut's University of Technology North Bangkok (KMUTNB) and partners provides an exchange of the state of the art and future developments in the two key areas of this process: Computer Networking and Data Mining. Behind the background of the foundation of ASEAN, it becomes clear that efficient languages, business principles and communication methods need to be adapted, unified and especially optimized to gain a maximum benefit to the users and customers of future IT systems.

  4. International Conference of Applied Science and Technology for Infrastructure Engineering

    Elvina Santoso, Shelvy; Hardianto, Ekky

    2017-11-01

    Preface: International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017. The International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017 has been scheduled and successfully taken place at Swiss-Bell Inn Hotel, Surabaya, Indonesia, on August 5th 2017 organized by Department of Civil Infrastructure Engineering, Faculty of Vocation, Institut Teknologi Sepuluh Nopember (ITS). This annual event aims to create synergies between government, private sectors; employers; practitioners; and academics. This conference has different theme each year and “MATERIAL FOR INFRASTUCTURE ENGINEERING” will be taken for this year’s main theme. In addition, we also provide a platform for various other sub-theme topic including but not limited to Geopolymer Concrete and Materials Technology, Structural Dynamics, Engineering, and Sustainability, Seismic Design and Control of Structural Vibrations, Innovative and Green Buildings, Project Management, Transportation and Highway Engineering, Geotechnical Engineering, Water Engineering and Resources Management, Surveying and Geospatial Engineering, Coastal Engineering, Geophysics, Energy, Electronic and Mechatronic, Industrial Process, and Data Mining. List of Organizers, Journal Editors, Steering Committee, International Scientific Committee, Chairman, Keynote Speakers are available in this pdf.

  5. 12th International Conference on Computing and Information Technology

    Boonkrong, Sirapat; Unger, Herwig

    2016-01-01

    This proceedings book presents recent research work and results in the area of communication and information technologies. The chapters of this book contain the main, well-selected and reviewed contributions of scientists who met at the 12th International Conference on Computing and Information Technology (IC2IT) held during 7th - 8th July 2016 in Khon Kaen, Thailand The book is divided into three parts: “User Centric Data Mining and Text Processing”, “Data Mining Algoritms and their Applications” and “Optimization of Complex Networks”.

  6. The national nuclear technology conference, 6-9 September 1998

    1998-01-01

    The National nuclear technology conference was held under the aegis of industrial and institutional stake holders from 6 to 9 September 1998 in Mmabatho and hosted by the University of North West. Papers were divided into the following theme clusters: safety, waste management and radiation protection; prospects for nuclear energy generation; applications in mining; applications in industry; medical applications; medical technology and training; agriculture, food security and water resources management; redress, education, research and development; policy and legal framework. The 58 papers were published in summary form only

  7. 2007 Disruptive Technologies Conference - Disruptive Technologies: Turning Lists into Capabilities

    2007-09-05

    Privilege management • Health care, benefits, finance , time and attendance, etc. • Military operations – “Combat Identification” • Friend, Foe, Neutral...Logistics Influence Force Support Corporate Mgt & Support N o im pl ie d pr io ri ti za ti on Movement & Maneuver Surface Warfare Joint Fires Undersea...Starter Generator MEMS Actuators / Valves Atomizer Nozzles Reclaimed Electrical Heat Engine UC Berkely Wankel Engine Exhaust Thermo Electric/Others

  8. International Conference on Informatics and Communication Technologies for Societal Developmen

    Bhojan, Anand; Peter, J

    2015-01-01

    This volume comprises research papers presented at the International Conference on Informatics and Communication Technologies for Societal Development (ICICTS 2014) held at Karunya University, India. The content focuses on the recent advancements in image or signal processing, computer vision, communication technologies, soft computing, advanced computing, data mining, and knowledge discovery. The primary objective of this volume is to facilitate advancement and application of the knowledge and to promote ideas that solve problems faced by society through cutting-edge technologies. The chapters contain selected articles from academicians, researchers, and industry experts in the form of frameworks, models, and architectures. Practical approaches, observations, and results of research that promotes societal development are also incorporated. This volume will serve as a useful compendium for interested readers and researchers working towards societal development from the technological perspective.

  9. 4th International Conference on Robot Intelligence Technology and Applications

    Karray, Fakhri; Jo, Jun; Sincak, Peter; Myung, Hyun

    2017-01-01

    This book covers all aspects of robot intelligence from perception at sensor level and reasoning at cognitive level to behavior planning at execution level for each low level segment of the machine. It also presents the technologies for cognitive reasoning, social interaction with humans, behavior generation, ability to cooperate with other robots, ambience awareness, and an artificial genome that can be passed on to other robots. These technologies are to materialize cognitive intelligence, social intelligence, behavioral intelligence, collective intelligence, ambient intelligence and genetic intelligence. The book aims at serving researchers and practitioners with a timely dissemination of the recent progress on robot intelligence technology and its applications, based on a collection of papers presented at the 4th International Conference on Robot Intelligence Technology and Applications (RiTA), held in Bucheon, Korea, December 14 - 16, 2015. For better readability, this edition has the total of 49 article...

  10. 2017 World Conference on Information Systems and Technologies

    Correia, Ana; Adeli, Hojjat; Reis, Luís; Costanzo, Sandra

    2017-01-01

    This book presents a selection of papers from the 2017 World Conference on Information Systems and Technologies (WorldCIST'17), held between the 11st and 13th of April 2017 at Porto Santo Island, Madeira, Portugal. WorldCIST is a global forum for researchers and practitioners to present and discuss recent results and innovations, current trends, professional experiences and challenges involved in modern Information Systems and Technologies research, together with technological developments and applications. The main topics covered are: Information and Knowledge Management; Organizational Models and Information Systems; Software and Systems Modeling; Software Systems, Architectures, Applications and Tools; Multimedia Systems and Applications; Computer Networks, Mobility and Pervasive Systems; Intelligent and Decision Support Systems; Big Data Analytics and Applications; Human–Computer Interaction; Ethics, Computers & Security; Health Informatics; Information Technologies in Education; and Information Tec...

  11. 3rd International Conference on Robot Intelligence Technology and Applications

    Yang, Weimin; Jo, Jun; Sincak, Peter; Myung, Hyun

    2015-01-01

    This book covers all aspects of robot intelligence from perception at sensor level and reasoning at cognitive level to behavior planning at execution level for each low level segment of the machine. It also presents the technologies for cognitive reasoning, social interaction with humans, behavior generation, ability to cooperate with other robots, ambience awareness, and an artificial genome that can be passed on to other robots. These technologies are to materialize cognitive intelligence, social intelligence, behavioral intelligence, collective intelligence, ambient intelligence and genetic intelligence. The book aims at serving researchers and practitioners with a timely dissemination of the recent progress on robot intelligence technology and its applications, based on a collection of papers presented at the 3rd International Conference on Robot Intelligence Technology and Applications (RiTA), held in Beijing, China, November 6 - 8, 2014. For better readability, this edition has the total 74 papers group...

  12. PREFACE: 21th International Conference for Students and Young Scientists: Modern Technique and Technologies (MTT'2015)

    2015-10-01

    Involving young researchers in the scientific process, and allowing them to gain scientific experience, are important issues for scientific development. The International Conference for Students and Young Scientists ''Modern Technique and Technologies'' is one of a number of scientific events, held at National Research Tomsk Polytechnic University aimed at training and forming the scientific elite. During previous years the conference established itself as a serious scientific event at an international level, attracting members which annually number about 400 students and young scientists from Russia and near and far abroad. An important indicator of this scientific event is the large number of scientific areas covered, such as power engineering, heat power engineering, electronic devices for monitoring and diagnostics, instrumentation, materials and technologies of new generations, methods of research and diagnostics of materials, automatic control and system engineering, physical methods science and engineering, design and artistic aspects of engineering, social and humanitarian aspects of engineering. The main issues, which are discussed at the conference by young researchers, are connected with analysis of contemporary problems, application of new techniques and technologies, and consideration of their relationship. Over the years, the conference committee has gained a lot of experience in organizing scientific meetings. There are all the necessary conditions: the staff of organizers includes employees of Tomsk Polytechnic University; the auditoriums are equipped with modern demonstration and office equipment; leading scientists are TPU professors; the status of the Tomsk Polytechnic University as a leading research university in Russia also plays an important role. All this allows collaboration between leading scientists from all around the world, who are annually invited to give lectures at the conference. The editorial board expresses gratitude to the

  13. Technology 2001: The Second National Technology Transfer Conference and Exposition, volume 1

    1991-01-01

    Papers from the technical sessions of the Technology 2001 Conference and Exposition are presented. The technical sessions featured discussions of advanced manufacturing, artificial intelligence, biotechnology, computer graphics and simulation, communications, data and information management, electronics, electro-optics, environmental technology, life sciences, materials science, medical advances, robotics, software engineering, and test and measurement.

  14. Co-sponsored second quarter progress review conference on district heating

    None

    1980-01-01

    A summary of the progress review conference on district heating and cooling systems is presented. The agenda and lists of speakers and attendees are presented. A history of district heating and some present needs and future policies are given and an excerpt from the National District Heating Program Strategy (DOE, March 1980) is included. Following the presentation, District Heating and Cooling Systems Program, by Alan M. Rubin, a fact sheet on DOE's Integrated Community Energy Systems Program and information from an oral presentation, District Heating and Cooling Systems for Communities Through Power Plant Retrofit Distribution Network, are given. The Second Quarterly Oral Report to the US DOE on the District Heating and Cooling Project in Detroit; the executive summary of the Piqua, Ohio District Heating and Cooling Demonstration Project; the Second Quarterly Report of the Moorehead, Minnesota District Heating Project; and the report from the Moorehead, Minnesota mayor on the Hot Water District Heating Project are presented.

  15. Materials of 13. conference: ATM'92 - Advanced materials and technologies

    1992-01-01

    13th conference on metal science, modern materials and technologies (ATM'92) has been held in Popowo near Warsaw, Poland in September 1992. The conference has been divided into 9 sections. There are: Plenary section (7 lectures); Functional materials (12 lectures); Methods of material microstructure shaping (5 lectures and 14 posters); Surface engineering (5 lectures and 27 posters); Composites (5 lectures and 9 posters); Iron alloys A (7 lectures and 8 posters); Iron alloys B (7 lectures and 18 posters); Non-ferrous metal alloys (7 lectures and 11 posters) and Methods for materials research (5 lectures and 23 posters). The new materials preparation, their properties and structure as well as a methods for obtaining a desirable properties of material or their surface have been broadly referred and discussed

  16. Meeting review: 2002 O'Reilly Bioinformatics Technology Conference.

    Counsell, Damian

    2002-01-01

    At the end of January I travelled to the States to speak at and attend the first O'Reilly Bioinformatics Technology Conference. It was a large, well-organized and diverse meeting with an interesting history. Although the meeting was not a typical academic conference, its style will, I am sure, become more typical of meetings in both biological and computational sciences.Speakers at the event included prominent bioinformatics researchers such as Ewan Birney, Terry Gaasterland and Lincoln Stein; authors and leaders in the open source programming community like Damian Conway and Nat Torkington; and representatives from several publishing companies including the Nature Publishing Group, Current Science Group and the President of O'Reilly himself, Tim O'Reilly. There were presentations, tutorials, debates, quizzes and even a 'jam session' for musical bioinformaticists.

  17. NATO Conference on Work, Organizations, and Technological Change

    Niehaus, Richard

    1982-01-01

    This volume is the proceedings of the Symposium entitled, "Work, Organizations and Technological Change" which was held in Garmisch-Partenkirchen, West Germany, 14-19 June 1981. The meeting was sponsored by the Special Panel on Systems Sciences of the NATO Scientific Affairs Division. In proposing this meeting the Symposium Directors built upon several preceding NATO conferences in the general area of personnel systems, manpower modelling, and organization. The most recent NATO Conference, entitled "Manpower Planning and Organization Design," was held in Stresa, Italy in 1977. That meeting was organized to foster research on the interrelationships between programmatic approaches to personnel planning within organizations and behavioral science approachs to organization design. From that context of corporate planning the total internal organizational perspective was the MACRO view, and the selection, assignment, care and feeding of the people was the MICRO view. Conceptually, this meant that an integrated appr...

  18. Technologies for production of electrticity or heat

    Schleisner, L.

    1990-03-01

    In connection with the production of ''Energi 2000 - Handlingsplan for en baeredygtig udvikling'' (Energy 2000 - Plan of Management for a Sustaniable Development) a summary and evaluation of various electric power and heat production technolgies was produced. Technologies in relation to fusion, wind energy, solar energy, wave energy, heat storage, electric power storage and hydrogen are dealt with. In each case a description of the technological development in the relevant field, also in relation to long (2030), middle (2015) and short term (2000) commercial aspects, is given. The technology is also explained in relation to energy and socio-economical aspects. The consequences of the utilization of the mentioned technologies with regard to the total energy and electric power systems and aspects of Danish industrial policy are considered. Suggestions are presented as to future subjects for research and development in relation to each technology. A number of these technologies are not yet used commercially. The descriptions are thus given on the basis of development on a global basis. (author) 32 tabs., 31 ills., 19 refs

  19. CONFERENCE REVIEW:V. International Educational Technology Symposium

    Reviewed by Mubin KIYICI

    2005-10-01

    Full Text Available 167V. International Educational Technology SymposiumWas held in Sakarya UniversityBetween 21 – 23 September 2005Reviewed by Mubin KIYICISakarya Universitymkiyici@anadolu.edu.trV. International Educational Technology Symposium was held in Sakarya University heldbetween 21 – 23 September 2005 by cooperation with Eastern Mediterranean University,Louisiana State University, Governors State University and Ohio University, and TOJET(The Turkish Online Journal of Educational Technology journal, at Sakarya UniversityCampus. Assoc. Prof. Dr. Aytekin ISMAN who was conference coordinator and Editor inchief of TOJET spoke at the opening ceremony of symposium. His speech was related todiffusion of distance education and diffusion of usage educational technology. And thenProf. Dr. Mehmet DURMAN who is Rector of Sakarya University, talked about aapplications of Distance Education which is applied by Sakarya University and educationaltechnology applications in Tukey. His Speech is here:168Dear GuestsWelcome to the “5th International Educational Technology ConferenceIETC/EGİTEK 2005. It is an international educational activity for academics,teachers and educators. This conference is now a well known educationaltechnology event and the number of paper submissions and attendeesincrease every year.This year, IETC-2005 received 268 applications. The conference academicadvisory board accepted 209 applications.IETC-2005 promotes the development and dissemination of theoreticalknowledge, conceptual research, and professional knowledge throughconference activities, the conference proceeding book, and the TurkishOnline Journal of Educational Technology (TOJET. Its focus is to create anddisseminate knowledge about the use instructional technology for learningand teaching in education.The main theme of IETC-2005 is distance education. Distance education is adelivery system of teaching and learning, when the teacher and the studentare separated by physical distance

  20. Waste heat recovery technologies for offshore platforms

    Pierobon, Leonardo; Benato, Alberto; Scolari, E.

    2014-01-01

    This article aims at finding the most suitable waste heat recovery technology for existing and future offshore facilities. The technologies considered in this work are the steam Rankine cycle, the air bottoming cycle and the organic Rankine cycle. A multi-objective optimization approach is employed...... to attain optimal designs for each bottoming unit by selecting specific functions tailored to the oil and gas sector, i.e. yearly CO2 emissions, weight and economic revenue. The test case is the gas turbine-based power system serving an offshore platform in the North Sea. Results indicate that the organic...... and of the primary heat exchanger, organic Rankine cycle turbogenerators appear thus to be the preferred solution to abate CO2 emissions and pollutants on oil and gas facilities. As a practical consequence, this paper provides guidelines for the design of high-efficiency, cost-competitive and low-weight power...

  1. Technology Roadmaps: Bioenergy for Heat and Power

    NONE

    2012-07-01

    The Technology Roadmap Bioenergy for Heat and Power highlights the importance of bioenergy in providing heat in the buildings sector and in industry, and shows what contribution it could make to meeting steadlily growing world electricity demand. The critical role of sustainability as well as the importance of international trade in meeting the projected demand for bioenergy, are highlighted in the roadmap, as well as the need for large-scale biomass plants in providing The roadmap identifies key actions by different stakeholders in the bioenergy sector, and sets out milestones for technology development in order to achieve a doubling of global bioenergy supply by 2050. It addresses the need for further R&D efforts, highlights measures to ensure sustainability of biomass production, and underlines the need for international collaboration to enhance the production and use of sustainable, modern bioenergy in different world regions.

  2. Technology Roadmaps: Bioenergy for Heat and Power

    NONE

    2012-08-01

    The Technology Roadmap Bioenergy for Heat and Power highlights the importance of bioenergy in providing heat in the buildings sector and in industry, and shows what contribution it could make to meeting steadlily growing world electricity demand. The critical role of sustainability as well as the importance of international trade in meeting the projected demand for bioenergy, are highlighted in the roadmap, as well as the need for large-scale biomass plants in providing The roadmap identifies key actions by different stakeholders in the bioenergy sector, and sets out milestones for technology development in order to achieve a doubling of global bioenergy supply by 2050. It addresses the need for further R&D efforts, highlights measures to ensure sustainability of biomass production, and underlines the need for international collaboration to enhance the production and use of sustainable, modern bioenergy in different world regions.

  3. Ceramic technology for advanced heat engines project

    1990-09-01

    The Ceramic Technology for Advanced Heat Engines Project was developed by the Department of Energy's Office of Transportation Systems in Conservation and Renewable Energy. This project was developed to meet the ceramic technology requirements of the OTT's automotive technology programs. This project is managed by ORNL and is closely coordinated with complementary ceramics tasks funded by other DOE offices, NASA, DoD, and industry. Research is discussed under the following topics; Turbomilling of SiC Whiskers; microwave sintering of silicon nitride; and milling characterization; processing of monolithics; silicon nitride matrix; oxide matrix; silicate matrix; thermal and wear coatings; joining; design; contact interfaces; time-dependent behavior; environmental effects; fracture mechanics; nondestructive evaluation; and technology transfer. References, figures, and tables are included with each topic.

  4. Ceramic Technology For Advanced Heat Engines Project

    1990-12-01

    Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DoD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. The objective of the project is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. This advanced materials technology is being developed in parallel and close coordination with the ongoing DOE and industry proof of concept engine development programs. To facilitate the rapid transfer of this technology to U.S. industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities. Abstracts prepared for appropriate papers.

  5. 1st International Conference on Robot Intelligence Technology and Applications

    Matson, Eric; Myung, Hyun; Xu, Peter

    2013-01-01

    In recent years, robots have been built based on cognitive architecture which has been developed to model human cognitive ability. The cognitive architecture can be a basis for intelligence technology to generate robot intelligence. In this edited book the robot intelligence is classified into six categories: cognitive intelligence, social intelligence, behavioral intelligence, ambient intelligence, collective intelligence and genetic intelligence. This classification categorizes the intelligence of robots based on the different aspects of awareness and the ability to act deliberately as a result of such awareness. This book aims at serving researchers and practitioners with a timely dissemination of the recent progress on robot intelligence technology and its applications, based on a collection of papers presented at the 1st International Conference on Robot Intelligence Technology and Applications (RiTA), held in Gwangju, Korea, December 16-18, 2012. For a better readability, this edition has the total 101 ...

  6. NDE Conference on Civil Engineering : a joint conference of the 7th Structural Materials Technology Conference (SMT) and the 6th International Symposium on Nondestructive Testing in Civil Engineering (NDT-CE)

    2007-01-01

    The 2006 NDE conference on Civil Engineering was held in St. Louis, MO on August 14 18, 2006. The conference combined the 7th Structural Materials Technology Conference (SMT) along with the 6th International Symposium on Nondestructive Testing in...

  7. Ceramic Technology for Advanced Heat Engines Project

    1990-08-01

    The Ceramic Technology For Advanced Heat Engines Project was developed by the Department of Energy's Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Advanced Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DOD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. An assessment of needs was completed, and a five year project plan was developed with extensive input from private industry. The objective of the project is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on structural ceramics for advanced gas turbine and diesel engines, ceramic hearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines.

  8. 2006 annual nuclear technology conference Aachen; Jahrestagung Kerntechnik 2006

    Anon.

    2006-07-15

    This year's ANNUAL NUCLEAR TECHNOLOGY CONFERENCE (JK) was organized in Aachen by the Deutsches Atomforum e.V. (DAtF) and the Kerntechnische Gesellschaft e.V. (KTG). The attendance by more than 1,200 participants from 17 nations underlines the role of this specialized congress as one of the leading events in the field of nuclear power use. For several years in a row, the number of participants has been increasing steadily. The first conference day offered plenary presentations traditionally dealing mainly with political and economic issues of the use of nuclear power, including a presentation by the President of the DAtF. The lead countries of JK 2006 were Belgium and Finland with contributions to the plenary day and special meetings on selected topics. The traditional proven scheme of the three-day meeting offered plenary sessions on the first day, and technical sessions, topical sessions, poster sessions, and special events on the following days. The 'Nuclear Power Campus' was run most successfully for the fourth time, presenting to high school students and university freshmen the world of nuclear power in a transparent way. The special commitment to the young generation was stressed at JK 2006 also by the 'Competence Preservation in Nuclear Technology' workshop. Nearly 2 dozen young scientists used the forum to present results of their work. The meeting was accompanied by a technical exhibition with meeting points established by vendors, suppliers, and service providers. (orig.)

  9. Book of abstracts: 3rd International Conference on Smart Energy Systems and 4th Generation District Heating

    This year the conference is organised by two research centres/projects in collaboration with Aalborg University. The first is the 4DH Strategic Research Centre and the other is the project RE-INVEST, both supported financial by the Danish Innovation Fund. After the previous two year´s success...... everyone for your valuable contributions. The aim is to present and discuss scientific findings and industrial experiences related to the development of Smart Energy Systems and future 4th Generation District Heating Technologies and Systems (4GDH). This development is fundamental to the implementation...

  10. International Conference on NextGen Electronic Technologies

    Thalmann, Nadia; Bhaaskaran, V

    2017-01-01

    This book is a collection of keynote lectures from international experts presented at International Conference on NextGen Electronic Technologies (ICNETS2-2016). ICNETS2 encompasses six symposia covering all aspects of electronics and communications domains, including relevant nano/micro materials and devices . This volume comprises of recent research in areas like computational signal processing analysis, intelligent embedded systems, nanoelectronic materials and devices, optical and microwave technologies, VLSI design: circuits systems and application, and wireless communication networks, and the internet of things. The contents of this book will be useful to researchers, professionals, and students working in the core areas of electronics and their applications, especially to signal processing, embedded systems, and networking.

  11. 2nd International Conference on Recent Advances in Information Technology

    Mukhopadhyay, Sushanta

    2014-01-01

    The book is based on the research papers presented in Second International Conference on Recent Advances in Information Technology (RAIT 2014), held at Indian School of Mines, Dhanbad, India. It provides the latest developments in the area of information technology and covers a variety of topics, including Advanced Algorithm Design and Analysis, Algorithmic Graph Theory, Artificial Intelligence, Bioinformatics, Circuit Design Automation, Computational Biology, Computational Mathematics, Cryptology, Data Compression, Database Management System, Data Mining, E-Applications, Embedded System, Information and Network Security, Information Retrieval, Internet Computing, etc. The objective is to familiarize the reader with the latest scientific developments that are taking place in various fields and the latest sophisticated problem solving tools that are being developed to deal with the complex and intricate problems that are otherwise difficult to solve by the usual and traditional methods.

  12. International conference on comparative assessments of solar power technologies

    Roy, A.

    1994-02-01

    Many regions in the world which lack fossil fuel resources but possess ample sunshine seek to identify near-term solar technologies capable of gradually replacing their fuel imports in cost-effective fashion. The conference addresses the following topics: technical and economical studies specifying their underlying basic assumption, methods and rules for evaluation in order to enable meaningful comparison between different technologies and systems. Detailed delineation of numerical and graphical representations, critical analysis and comparison between simulations, and test validity. Generalized performance indicators for systems and subsystems, problems of measuring and evaluating physical parameters, of terminology and conceptual tools for comparative evaluations. Advances in research development, engineering and field performance, including implications pertaining to comparative assessments and definitions of criteria and standards helpful to comparative evaluation. Assessments of the full (and hidden) cost of fossil energies as compared to solar, including environmental costs. Cost/benefit studies for remote versus centralized systems. (ed.)

  13. First International Conference on Applications of Photonic Technology (ICAPT'94)

    Chrostowski, Jacek; Measures, Raymond; Applications of Photonic Technology

    1995-01-01

    In this book we present a snapshot of the state of the art in photonics in 1994, showing typical applications and emerging new ones; discussing the key technologies behind these applications, their limitations, and prospects. The articles in this book are extended versions of the papers presented at the first International Conference on Applications ofPhotonic Technology (ICAPT'94), held in Toronto, Canada, on June 21-23, 1994. Photonics has been recognized as one of the key technologies for the 21 st century, as electronics was the technology of the 20th centrury and electrical engineering changed the life of people in the 19th century. According to the recent report of the Organization for Economic Cooperation and Development in Paris (OECD), the market for photonics will grow dramatically in the next 10 years with an expected world-wide expenditure of US $230 billion from some US $30 billion in 1992. The explosion of information technology was the largest driving force for the deployment of photonic techno...

  14. Laser Processed Condensing Heat Exchanger Technology Development

    Hansen, Scott; Wright, Sarah; Wallace, Sarah; Hamilton, Tanner; Dennis, Alexander; Zuhlke, Craig; Roth, Nick; Sanders, John

    2017-01-01

    The reliance on non-permanent coatings in Condensing Heat Exchanger (CHX) designs is a significant technical issue to be solved before long-duration spaceflight can occur. Therefore, high reliability CHXs have been identified by the Evolvable Mars Campaign (EMC) as critical technologies needed to move beyond low earth orbit. The Laser Processed Condensing Heat Exchanger project aims to solve these problems through the use of femtosecond laser processed surfaces, which have unique wetting properties and potentially exhibit anti-microbial growth properties. These surfaces were investigated to identify if they would be suitable candidates for a replacement CHX surface. Among the areas researched in this project include microbial growth testing, siloxane flow testing in which laser processed surfaces were exposed to siloxanes in an air stream, and manufacturability.

  15. Technology 2003: The Fourth National Technology Transfer Conference and Exposition, volume 2

    Hackett, Michael (Compiler)

    1994-01-01

    Proceedings from symposia of the Technology 2003 Conference and Exposition, Dec. 7-9, 1993, Anaheim, CA, are presented. Volume 2 features papers on artificial intelligence, CAD&E, computer hardware, computer software, information management, photonics, robotics, test and measurement, video and imaging, and virtual reality/simulation.

  16. Proceedings of the 4th international conference on heat exchangers boilers and pressure vessels

    1999-01-01

    The conference discusses the following issues: pollution control for thermal units in the Egyptian industry; burnup calculations for ETRR-1 and ETRR-2 reactors; environmental impacts; heat exchangers; determination of economic life of marine power plant; psa study of ETRR-2 gadolinium injection system

  17. Advances in Technology and Management : Proceedings of the 2012 International Conference on Technology and Management

    2012-01-01

    This book Advances in Technology and Management contains 116 full length papers presented at the International Conference on Technology and Management, held on June 12-13, 2012, Jeju-Island, Korea. The goal of ICTAM 2012 is to bring together researchers working in many different areas of technology and management to foster international collaborations and exchange of new ideas.   This volume can be divided into two sections on the basis of the classification of manuscripts considered. The first section deals with technology. The second section of this volume consists of management.

  18. Heterologous expression of three Camellia sinensis small heat shock protein genes confers temperature stress tolerance in yeast and Arabidopsis thaliana.

    Wang, Mingle; Zou, Zhongwei; Li, Qinghui; Xin, Huahong; Zhu, Xujun; Chen, Xuan; Li, Xinghui

    2017-07-01

    CsHSP17.7, CsHSP18.1, and CsHSP21.8 expressions are induced by heat and cold stresses, and CsHSP overexpression confers tolerance to heat and cold stresses in transgenic Pichia pastoris and Arabidopsis thaliana. Small heat shock proteins (sHSPs) are crucial for protecting plants against biotic and abiotic stresses, especially heat stress. However, knowledge concerning the functions of Camellia sinensis sHSP in heat and cold stresses remains poorly understood. In this study, three C. sinensis sHSP genes (i.e., CsHSP17.7, CsHSP18.1, and CsHSP21.8) were isolated and characterized using suppression subtractive hybridization (SSH) technology. The CsHSPs expression levels in C. sinensis leaves were significantly up-regulated by heat and cold stresses. Phylogenetic analyses revealed that CsHSP17.7, CsHSP18.1, and CsHSP21.8 belong to sHSP Classes I, II, and IV, respectively. Heterologous expression of the three CsHSP genes in Pichia pastoris cells enhanced heat and cold stress tolerance. When exposed to heat and cold treatments, transgenic Arabidopsis thaliana plants overexpressing CsHSP17.7, CsHSP18.1, and CsHSP21.8 had lower malondialdehyde contents, ion leakage, higher proline contents, and transcript levels of stress-related genes (e.g., AtPOD, AtAPX1, AtP5CS2, and AtProT1) compared with the control line. In addition, improved seed germination vigor was also observed in the CsHSP-overexpressing seeds under heat stress. Taken together, our results suggest that the three identified CsHSP genes play key roles in heat and cold tolerance.

  19. 20th International Conference for Students and Young Scientists: Modern Techniques and Technologies (MTT'2014)

    2014-01-01

    The active involvement of young researchers in scientific processes and the acquisition of scientific experience by gifted youth currently have a great value for the development of science. One of the research activities of National Research Tomsk Polytechnic University, aimed at the preparing and formation of the next generation of scientists, is the International Conference of Students and Young Scientists ''Modern Techniques and Technologies'', which was held in 2014 for the twentieth time. Great experience in the organization of scientific events has been acquired through years of carrying the conference. There are all the necessary resources for this: a team of organizers – employees of Tomsk Polytechnic University, premises provided with modern office equipment and equipment for demonstration, and leading scientists – professors of TPU, as well as the status of the university as a leading research university in Russia. This way the conference is able to attract world leading scientists for the collaboration. For the previous years the conference proved itself as a major scientific event at international level, which attracts more than 600 students and young scientists from Russia, CIS and other countries. The conference provides oral plenary and section reports. The conference is organized around lectures, where leading Russian and foreign scientists deliver plenary presentations to young audiences. An important indicator of this scientific event is the magnitude of the coverage of scientific fields: energy, heat and power, instrument making, engineering, systems and devices for medical purposes, electromechanics, material science, computer science and control in technical systems, nanotechnologies and nanomaterials, physical methods in science and technology, control and quality management, design and technology of artistic materials processing. The main issues considered by young researchers at the conference were related to the

  20. Ceramic technology for Advanced Heat Engines Project

    Johnson, D.R.

    1991-07-01

    Significant accomplishments in fabricating ceramic components for advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and database and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. An assessment of needs was completed, and a five year project plan was developed with extensive input from private industry. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities. This project is managed by ORNL for the Office of Transportation Technologies, Office of Transportation Materials, and is closely coordinated with complementary ceramics tasks funded by other DOE offices, NASA, DOD, and industry.

  1. ASDEX contributions to the 17th European conference on controlled fusion and plasma heating

    1990-09-01

    The 'ASDEX contributions to the 17th European conference on controlled fusion and plasma heating' (Amsterdam, June 25-29, 1990) hold one invited paper (Physics of enhanced confinement with peaked and board density profiles) and 12 chapters containing 44 contributed papers dealing with the following topics: Lower hybrid current drive and heating; Ion cyclotron heating; General confinement studies; Fluctuation studies; Direct measurement of transport coefficients; H-mode studies; Pellet studies; Divertor and SOL-studies; Impurity and impurity transport studies; Density limit studies; MHD studies; Diagnostic development. (orig./AH)

  2. International Conference on Soft Computing in Information Communication Technology

    Soft Computing in Information Communication Technology

    2012-01-01

      This is a collection of the accepted papers concerning soft computing in information communication technology. All accepted papers are subjected to strict peer-reviewing by 2 expert referees. The resultant dissemination of the latest research results, and the exchanges of views concerning the future research directions to be taken in this field makes the work of immense value to all those having an interest in the topics covered. The present book represents a cooperative effort to seek out the best strategies for effecting improvements in the quality and the reliability of Neural Networks, Swarm Intelligence, Evolutionary Computing, Image Processing Internet Security, Data Security, Data Mining, Network Security and Protection of data and Cyber laws. Our sincere appreciation and thanks go to these authors for their contributions to this conference. I hope you can gain lots of useful information from the book.

  3. 2nd International Conference on Computer and Communication Technologies

    Raju, K; Mandal, Jyotsna; Bhateja, Vikrant

    2016-01-01

    The book is about all aspects of computing, communication, general sciences and educational research covered at the Second International Conference on Computer & Communication Technologies held during 24-26 July 2015 at Hyderabad. It hosted by CMR Technical Campus in association with Division – V (Education & Research) CSI, India. After a rigorous review only quality papers are selected and included in this book. The entire book is divided into three volumes. Three volumes cover a variety of topics which include medical imaging, networks, data mining, intelligent computing, software design, image processing, mobile computing, digital signals and speech processing, video surveillance and processing, web mining, wireless sensor networks, circuit analysis, fuzzy systems, antenna and communication systems, biomedical signal processing and applications, cloud computing, embedded systems applications and cyber security and digital forensic. The readers of these volumes will be highly benefited from the te...

  4. 76 FR 52670 - 2011 Technology Transfer Summit North America Conference

    2011-08-23

    ... conference will be further enhanced by the TTS Initiative Business Social Network, an online business... leading universities and research institutes together with biotech & pharma licensing & business... relating to partnering, licensing & business development. Conference speakers for the 2011 include: --Kathy...

  5. Contributions to the 1st Int. Conference on new laser technologies and applications

    1988-01-01

    The report contains ten papers contributing to the first International conference on new laser technologies held in Olympia from 19 to 23 June 1988. They represent the activities in this field carried out by the ENEA Department of Basic Technologies

  6. Radiation and life: Proceedings of the 8. Nuclear Science and Technology Conference (NST8)

    2001-06-01

    The 8th conference on nuclear science and technology was held on 21-22 June 2001 in Bangkok. This conference contain paper on non-power applications of nuclear technology in medicine, agriculture and industry. These application include irradiation of food for des infestration tram technologies used in diagnosis and therapy and radiation chemistry important to industrial processes. Some technologies which evolved from the development of nuclear power industry are also discussed

  7. Radiation and life: Proceedings of the 8. Nuclear Science and Technology Conference (NST8)

    NONE

    2001-06-01

    The 8th conference on nuclear science and technology was held on 21-22 June 2001 in Bangkok. This conference contain paper on non-power applications of nuclear technology in medicine, agriculture and industry. These application include irradiation of food for des infestration tram technologies used in diagnosis and therapy and radiation chemistry important to industrial processes. Some technologies which evolved from the development of nuclear power industry are also discussed.

  8. 11th International Conference on Multimedia and Ubiquitous Engineering & 12th International Conference on Future Information Technology

    Chen, Shu-Ching; Choo, Kim-Kwang

    2017-01-01

    This book presents the proceedings of the 11th International Conference on Multimedia and Ubiquitous Engineering (MUE2017) and the 12th International Conference on Future Information Technology (FutureTech2017), held in Seoul, South Korea on May 22–24, 2017. These two conferences provided an opportunity for academic and industrial professionals to discuss recent advances in the area of multimedia and ubiquitous environments including models and systems, new directions, and novel applications associated with the utilization and acceptance of ubiquitous computing devices and systems. The resulting papers address the latest technological innovations in the fields of digital convergence, multimedia convergence, intelligent applications, embedded systems, mobile and wireless communications, bio-inspired computing, grid and cloud computing, semantic web, user experience, HCI, and security and trust computing. The book offers a valuable resource for a broad readership, including students, academic researchers, and...

  9. Technology, applications and modelling of ohmic heating: a review.

    Varghese, K Shiby; Pandey, M C; Radhakrishna, K; Bawa, A S

    2014-10-01

    Ohmic heating or Joule heating has immense potential for achieving rapid and uniform heating in foods, providing microbiologically safe and high quality foods. This review discusses the technology behind ohmic heating, the current applications and thermal modeling of the process. The success of ohmic heating depends on the rate of heat generation in the system, the electrical conductivity of the food, electrical field strength, residence time and the method by which the food flows through the system. Ohmic heating is appropriate for processing of particulate and protein rich foods. A vast amount of work is still necessary to understand food properties in order to refine system design and maximize performance of this technology in the field of packaged foods and space food product development. Various economic studies will also play an important role in understanding the overall cost and viability of commercial application of this technology in food processing. Some of the demerits of the technology are also discussed.

  10. 6TH International Crimean Conference, Microwave and Telecommunication Technology

    1996-01-01

    .... The Military historical session of the conference presented the papers dealing with the history of creation and development of satellite communication and navigation systems and radiolocation media...

  11. Experimental investigation of an active magnetic regenerative heat circulator applied to self-heat recuperation technology

    Kotani, Yui; Kansha, Yasuki; Ishizuka, Masanori; Tsutsumi, Atsushi

    2014-01-01

    An experimental investigation into an active magnetic regenerative (AMR) heat circulator based on self-heat recuperation technology, was conducted to evaluate its energy saving potential in heat circulation. In an AMR heat circulator, magnetocaloric effect is applied to recuperate the heat exergy of the process fluid. The recuperated heat can be reused to heat the feed process fluid and realize self-heat recuperation. In this paper, AMR heat circulator has newly been constructed to determine the amount of heat circulated when applied to self-heat recuperation and the energy consumption of the heat circulator. Gadolinium and water was used as the magnetocaloric working material and the process fluid, respectively. The heat circulated amount was determined by measuring the temperature of the process fluid and gadolinium. The net work input for heat circulation was obtained from the magnetizing and demagnetizing forces and the distance travelled by the magnetocaloric bed. The results were compared with the minimum work input needed for heat circulation derived from exergy loss during heat exchange. It was seen that the experimentally obtained value was close to the minimum work input needed for heat circulation. - Highlights: • AMR heat circulator has newly been constructed for experimental evaluation. • Heat circulation in the vicinity of Curie temperature was observed. • Energy consumption of an AMR heat circulator has been measured. • Energy saving for processes near Curie temperature of working material was seen

  12. Proceedings of the 3rd international conference on heat exchangers, boilers and pressure vessels (HEB-97). Vol.1 (Research Papers)

    1997-04-01

    This conference was held on 5-6 Apr 1997 in Alexandria. the specialists discussed heat exchangers, boilers and pressure vessels. more than 200 papers were presented in the meetings. it contains of data, figures and tables

  13. W7-AS/W7-X contributions to the 20th European conference on controlled fusion and plasma heating

    1993-08-01

    This report contains the 23 contributions of the Max-Planck-Institut fuer Plasmaphysik to the above mentioned conference. The contributions deal with plasma heating problems in the Wendelstein stellarators. (WL)

  14. Proceedings of the 3rd international conference on heat exchangers, boilers and pressure vessels (HEB-97). Vol.1 (Research Papers)

    NONE

    1997-04-01

    This conference was held on 5-6 Apr 1997 in Alexandria. the specialists discussed heat exchangers, boilers and pressure vessels. more than 200 papers were presented in the meetings. it contains of data, figures and tables.

  15. International Conference on Emerging Research in Electronics, Computer Science and Technology

    Sheshadri, Holalu; Padma, M

    2014-01-01

    PES College of Engineering is organizing an International Conference on Emerging Research in Electronics, Computer Science and Technology (ICERECT-12) in Mandya and merging the event with Golden Jubilee of the Institute. The Proceedings of the Conference presents high quality, peer reviewed articles from the field of Electronics, Computer Science and Technology. The book is a compilation of research papers from the cutting-edge technologies and it is targeted towards the scientific community actively involved in research activities.

  16. 6{sup th} Krakow-Winnipeg Conference on Advanced Bioimaging Technologies

    NONE

    2011-09-15

    Starting from 1997 researchers have been meet in Krakow, Poland for the Krakow-Winnipeg conference on MRI. The scope of the conference includes the latest technical advances in biomedical imaging including molecular imaging and nanotechnology. Other topics for presentation include recent developments in whole body MRI, multi-transmit technology and gradient-free MRI. Book of Abstracts from the 6{sup th} Conference contains 29 abstracts of Oral Presentations and 11 abstracts of Posters.

  17. 9th International Conference on Multimedia and Ubiquitous Engineering and the 10th International Conference on Future Information Technology

    Chao, Han-Chieh; Arabnia, Hamid; Yen, Neil; Advanced Multimedia and Ubiquitous Engineering : Future Information Technology; MUE-15; FutureTech 2015

    This volume brings together contributions representing the state-of-the-art in new multimedia and future technology information research, currently a major topic in computer science and electronic engineering. Researchers aim to interoperate multimedia frameworks, transforming the way people work and  interact with multimedia data. This book covers future information technology topics including digital and multimedia convergence, ubiquitous and pervasive computing, intelligent computing and applications, embedded systems, mobile and wireless communications, bio-inspired computing, grid and cloud computing, semantic web, human-centric computing and social networks, adaptive and context-aware computing, security and trust computing and related areas.  Representing the combined proceedings of the 9th International Conference on Multimedia and Ubiquitous Engineering (MUE-15) and the 10th International Conference on Future Information Technology (FutureTech 2015), this book aims to provide a complete coverage of...

  18. New media in technology education: threats and opportunities : a conference summary

    Vries, de M.J.; Vries, de M.J.

    2001-01-01

    The theme for the PATT-11 conference, New Media in Technology Education, is certainly not one of the easiest when it comes to developing a balanced view on its merits and limits. It almost seems like one is either a total addict, or one takes a Luddite stand and rejects it. The aim of the conference

  19. Intelligent Decision Technologies : Proceedings of the 4th International Conference on Intelligent Decision Technologies

    Watanabe, Toyohide; Phillips-Wren, Gloria; Howlett, Robert; Jain, Lakhmi

    2012-01-01

    The Intelligent Decision Technologies (IDT) International Conference encourages an interchange of research on intelligent systems and intelligent technologies that enhance or improve decision making. The focus of IDT is interdisciplinary and includes research on all aspects of intelligent decision technologies, from fundamental development to real applications. IDT has the potential to expand their support of decision making in such areas as finance, accounting, marketing, healthcare, medical and diagnostic systems, military decisions, production and operation, networks, traffic management, crisis response, human-machine interfaces, financial and stock market monitoring and prediction, and robotics. Intelligent decision systems implement advances in intelligent agents, fuzzy logic, multi-agent systems, artificial neural networks, and genetic algorithms, among others.  Emerging areas of active research include virtual decision environments, social networking, 3D human-machine interfaces, cognitive interfaces,...

  20. Heat savings and heat generation technologies: Modelling of residential investment behaviour with local health costs

    Zvingilaite, Erika; Klinge Jacobsen, Henrik

    2015-01-01

    The trade-off between investing in energy savings and investing in individual heating technologies with high investment and low variable costs in single family houses is modelled for a number of building and consumer categories in Denmark. For each group the private economic cost of providing heating comfort is minimised. The private solution may deviate from the socio-economical optimal solution and we suggest changes to policy to incentivise the individuals to make choices more in line with the socio-economic optimal mix of energy savings and technologies. The households can combine their primary heating source with secondary heating e.g. a woodstove. This choice results in increased indoor air pollution with fine particles causing health effects. We integrate health cost due to use of woodstoves into household optimisation of heating expenditures. The results show that due to a combination of low costs of primary fuel and low environmental performance of woodstoves today, included health costs lead to decreased use of secondary heating. Overall the interdependence of heat generation technology- and heat saving-choice is significant. The total optimal level of heat savings for private consumers decrease by 66% when all have the option to shift to the technology with lowest variable costs. - Highlights: • Heat saving investment and heat technology choice are interdependent. • Health damage costs should be included in private heating choice optimisation. • Flexibility in heating technology choice reduce the optimal level of saving investments. • Models of private and socioeconomic optimal heating produce different technology mix. • Rebound effects are moderate but varies greatly among consumer categories

  1. Technology Roadmaps: Solar Heating and Cooling

    NONE

    2012-09-06

    The solar heating and cooling (SHC) roadmap outlines a pathway for solar energy to supply almost one sixth (18 EJ) of the world's total energy use for both heating and cooling by 2050. This would save some 800 megatonnes of carbon dioxide (CO2) emissions per year; more than the total CO2 emissions in Germany in 2009. While solar heating and cooling today makes a modest contribution to world energy demand, the roadmap envisages that if concerted action is taken by governments and industry, solar energy could annually produce more than 16% of total final energy use for low temperature heat and nearly 17% for cooling. Given that global energy demand for heat represents almost half of the world's final energy use -- more than the combined global demand for electricity and transport -- solar heat can make a significant contribution in both tackling climate change and strengthening energy security.

  2. Technology Roadmaps: Solar Heating and Cooling

    NONE

    2012-07-01

    The solar heating and cooling (SHC) roadmap outlines a pathway for solar energy to supply almost one sixth (18 EJ) of the world’s total energy use for both heating and cooling by 2050. This would save some 800 megatonnes of carbon dioxide (CO2) emissions per year; more than the total CO2 emissions in Germany in 2009. While solar heating and cooling today makes a modest contribution to world energy demand, the roadmap envisages that if concerted action is taken by governments and industry, solar energy could annually produce more than 16% of total final energy use for low temperature heat and nearly 17% for cooling. Given that global energy demand for heat represents almost half of the world’s final energy use – more than the combined global demand for electricity and transport – solar heat can make a significant contribution in both tackling climate change and strengthening energy security.

  3. Conference Proceedings: Petro-tech 1998 - petroleum information technology : making IT work for Canada's petroleum industry

    1998-01-01

    The value of information technology in the petroleum industry was explored at this conference. A total of 18 papers were presented in five sessions. The dominant themes of the five sessions were: (1) information technology, delivering value or simply a utility, (2) information technology, corporate drive or passenger, (3) managing and measuring information technology investments, (4) what does the future hold for information technology, and (5) web technology. tabs., figs

  4. Heat switch technology for cryogenic thermal management

    Shu, Q. S.; Demko, J. A.; E Fesmire, J.

    2017-12-01

    Systematic review is given of development of novel heat switches at cryogenic temperatures that alternatively provide high thermal connection or ideal thermal isolation to the cold mass. These cryogenic heat switches are widely applied in a variety of unique superconducting systems and critical space applications. The following types of heat switch devices are discussed: 1) magnetic levitation suspension, 2) shape memory alloys, 3) differential thermal expansion, 4) helium or hydrogen gap-gap, 5) superconducting, 6) piezoelectric, 7) cryogenic diode, 8) magneto-resistive, and 9) mechanical demountable connections. Advantages and limitations of different cryogenic heat switches are examined along with the outlook for future thermal management solutions in materials and cryogenic designs.

  5. National conference on centralized heat supply from heat feeders in selected localities

    1990-05-01

    The proceedings contain 8 contributions, out of which 5 have been inputted in INIS. These deal with centralized heat supply systems, hydraulic and thermal parameters of the hot water distribution systems, and the feasibility of including nuclear sources into the systems. Treated are both actual systems and calculation models. (B.S.)

  6. Book of abstracts: International Conference on Smart Energy Systems and 4th Generation District Heating

    , which takes a sole focus on the electricity sector, the smart energy systems approach includes the entire energy system in its identification of suitable energy infrastructure designs and operation strategies. Focusing solely on the smart electricity grid often leads to the definition of transmission......It is a great pleasure to welcome you to the first International Conference on Smart Energy Systems and 4th Generation District Heating at Aalborg University, Copenhagen Campus on 25-26 August 2015. The conference is organised by the 4DH Strategic Research Centre in collaboration with Aalborg...... University and offers more than 70 presentations in 3 parallel sessions with more than 180 participants from 25 countries around the world. The aim is to present and discuss scientific findings and industrial experiences related to the development of Smart Energy Systems and future 4th Generation District...

  7. A confrontation with reality - Proceedings of the 19th Association for Learning Technology Conference

    Hawkridge, David; Verjans, Steven; Wilson, Gail

    2012-01-01

    Hawkridge, D., Verjans, S., & Wilson, G. (Eds.) (2012). A confrontation with reality - Proceedings of the 19th Association for Learning Technology Conference (ALT-C 2012). September, 11-14, 2012, Manchester, UK.

  8. Proceedings of the first nuclear science and technology conference no. 1. Nuclear science and its application

    1986-01-01

    This conference contains papers on non-power applications of nuclear technology in agriculture and industry. These applications include irradiation of food for disinfestation and radiopreservation, radiation monitoring, and radiation chemistry important to industrial processes

  9. Sustainability assessment of renewable power and heat generation technologies

    Dombi, Mihály; Kuti, István; Balogh, Péter

    2014-01-01

    Rationalisation of consumption, more efficient energy usage and a new energy structure are needed to be achieved in order to shift the structure of energy system towards sustainability. The required energy system is among others characterised by intensive utilisation of renewable energy sources (RES). RES technologies have their own advantages and disadvantages. Nevertheless, for the strategic planning there is a great demand for the comparison of RES technologies. Furthermore, there are additional functions of RES utilisation expected beyond climate change mitigation, e.g. increment of employment, economic growth and rural development. The aim of the study was to reveal the most beneficial RES technologies with special respect to sustainability. Ten technologies of power generation and seven technologies of heat supply were examined in a multi-criteria sustainability assessment frame of seven attributes which were evaluated based on a choice experiment (CE) survey. According to experts the most important characteristics of RES utilisation technologies are land demand and social impacts i.e. increase in employment and local income generation. Concentrated solar power (CSP), hydropower and geothermal power plants are favourable technologies for power generation, while geothermal district heating, pellet-based non-grid heating and solar thermal heating can offer significant advantages in case of heat supply. - highlights: • We used choice experiment to estimate the weights of criteria for the sustainability assessment of RES technologies. • The most important attributes of RES technologies according to experts are land demand and social impacts. • Concentrated solar power (CSP), hydropower and geothermal power plants are advantageous technologies for power generation. • Geothermal district heating, pellet-based non-grid heating and solar thermal heating are favourable in case of heat supply

  10. Fundamentals of electroheat electrical technologies for process heating

    Lupi, Sergio

    2017-01-01

    This book provides a comprehensive overview of the main electrical technologies for process heating, which tend to be treated separately in specialized books. Individual chapters focus on heat transfer, electromagnetic fields in electro-technologies, arc furnaces, resistance furnaces, direct resistance heating, induction heating, and high-frequency and microwave heating. The authors highlight those topics of greatest relevance to a wide-ranging teaching program, and at the same time offer a detailed review of the main applications of the various technologies. The content represents a synthesis of the extensive knowledge and experience that the authors have accumulated while researching and teaching at the University of Padua’s Engineering Faculty. This text on industrial electroheating technologies is a valuable resource not only for students of industrial, electrical, chemical, and material science engineering, but also for engineers, technicians and others involved in the application of electroheating and...

  11. Analysis of the Technological Parameters of the Heat Exchanger in the Heating Pipe

    Knyazev Vladimir

    2017-01-01

    Full Text Available The main purpose of this article is to analyze the selecting of technological parameters for the heat exchanger to improve the heat transfer and reduce the noise during operation in the heating pipe, which is used in the different systems of the planes and helicopters. In result of this study, the best technical parameters are found, considering different variations of deformation cutting heat exchanger pipes.

  12. 1st International Conference on Information and Communication Technology for Intelligent Systems

    Das, Swagatam

    2017-01-01

    This volume contains 59 papers presented at ICTIS 2015: International Conference on Information and Communication Technology for Intelligent Systems. The conference was held during 28th and 29th November, 2015, Ahmedabad, India and organized communally by Venus International College of Technology, Association of Computer Machinery, Ahmedabad Chapter and Supported by Computer Society of India Division IV – Communication and Division V – Education and Research. This volume contains papers mainly focused on ICT for Computation, Algorithms and Data Analytics etc.

  13. New and future heat pump technologies

    Creswick, F. A.

    It is not possible to say for sure what future heat pumps will look like, but there are some interesting possibilities. In the next five years, we are likely to see US heat pumps with two kinds of innovations: capacity modulation and charge control. Capacity modulation will be accomplished by variable-speed compressor motors. The objective of charge control is to keep the refrigerant charge in the system where it belongs for best performance; there are probably many ways to accomplish this. Charge control will improve efficiency and durability; capacity modulation will further improve efficiency and comfort. The Stirling cycle heat pump has several interesting advantages, but it is farther out in time. At present, we don't know how to make it as efficient as the conventional vapor-compression heat pump. Electric utility people should be aware that major advances are being made in gas-fired heat pumps which could provide strong competition in the future. However, even a gas-fired heat pump has a substantial auxiliary electric power requirement. The resources needed to develop advanced heat pumps are substantial and foreign competition will be intense. It will be important for utilities, manufacturers, and the federal government to work in close cooperation.

  14. Proceedings of 8. national conference on nuclear electronic and nuclear detection technology: Pt.1

    1996-01-01

    The 8th National Conference on Nuclear Electronics and Nuclear Detection Technology was held during 2-7, 12, 1996 in Zhuhai, Guangdong, China. 184 pieces of papers were collected in the conference proceedings. The contents of the conference proceedings are: nuclear electronics, nuclear detectors, nuclear instruments and its application, nuclear medical electronics, computer applications in nuclear sciences and technology, measurement of nuclear monitoring and nuclear explosion, radiation hardened electronics, liquid scintillation counting techniques and miscellaneous. Reported hereafter is the first part of the proceedings

  15. Presentations of the PTAC wireless, telecommunications and e-business technology conference

    NONE

    2003-07-01

    This conference was attended by experts in the telecommunications industry who demonstrated how the petroleum industry can reduce costs and improve profitability through innovative wireless, telecommunications and e-business technology solutions. The conference was divided into two main sessions, featuring field operation presentations and head office presentations. Current technologies and success stories and challenges were presented for exploration, drilling, completions and production operations. The conference featured 16 presentations, of which 12 have been indexed separately for inclusion in this database. refs., tabs., figs.

  16. Proceedings of the third international conference on recent advances in material processing technology: book of abstracts

    Mannan, S.L.; Manisekar, K.; Lenin, N.; Ramanan, P.

    2013-01-01

    The objective of the conference was to disseminate information on the latest trends and global research in manufacturing and material processing techniques. This conference provided a forum to share information on technologies, concepts, and techniques to improve the quality of the products and productivity. The deliberations at the conference provided discussion on Casting Technology, Forming processes, Manufacturing Techniques, Simulation and Modeling Techniques, Tools and Precision Engineering, Condition Monitoring, Composites, Optimization Techniques, Surface Engineering, Welding Technology, Nano Technology, Recycle Technology, Fuel Cell Technology, Sensors and Robotics, Materials for Energy Engineering, Rapid Protyping, Eco-Manufacturing Systems, Functionally Graded Materials, Non-Destructive Evaluation, Materials Development and Evaluation etc. Articles relevant to INIS are indexed separately

  17. Assessment of Japanese variable speed heat pump technology

    Ushimaru, Kenji

    1988-01-01

    An analysis of critical component technologies and design methodologies for Japanese variable speed heat pumps are presented. The market for variable speed heat pumps in Japan is predominantly residential split-type, between the fractional to 2.5 ton capacity range. Approximately 1.1 million residential inverter-driven heat pumps were sold in 1987. Based on the market trends, component technology and several advanced features are described. Similarities and differences between Japanese and US system design methodologies are discussed. Finally, the outlook for future technology trends is briefly described. 8 refs., 6 figs., 1 tab.

  18. The technological raw material heating furnaces operation efficiency improving issue

    Paramonov, A. M.

    2017-08-01

    The issue of fuel oil applying efficiency improving in the technological raw material heating furnaces by means of its combustion intensification is considered in the paper. The technical and economic optimization problem of the fuel oil heating before combustion is solved. The fuel oil heating optimal temperature defining method and algorithm analytically considering the correlation of thermal, operating parameters and discounted costs for the heating furnace were developed. The obtained optimization functionality provides the heating furnace appropriate thermal indices achievement at minimum discounted costs. The carried out research results prove the expediency of the proposed solutions using.

  19. Advances in technologies for decay heat removal

    Yadigaroglu, G.; Berkovich, V.; Bianchi, A.; Chen B.; Meseth, J.; Vecchiarelli, J.; Vidard, M.

    1999-01-01

    The various decay heat removal concepts that have been used for the evolutionary water reactor plant designs developed worldwide are examined and common features identified. Although interesting new features of the 'classical' plants are mentioned, the emphasis is on passive core and containment decay heat removal systems. The various systems are classified according to the function they have to accomplish; they often share common characteristics and similar equipment. (author)

  20. 1st International Nuclear Science and Technology Conference 2014 (INST2014)

    2015-04-01

    Nuclear technology has played an important role in many aspects of our lives, including agriculture, energy, materials, medicine, environment, forensics, healthcare, and frontier research. The International Nuclear Science and Technology Conference (INST) aims to bring together scientists, engineers, academics, and students to share knowledge and experiences about all aspects of nuclear sciences. INST has evolved from a series of national conferences in Thailand called Nuclear Science and Technology (NST) Conference, which has been held for 11 times, the first being in 1986. INST2014 was held in August 2014 and hosted by Thailand Institute of Nuclear Technology (TINT). The theme was "Driving the future with nuclear technology". The conference working language was English. The proceedings were peer reviewed and considered for publication. The topics covered in the conference were: • Agricultural and food applications [AGR] • Environmental applications [ENV] • Radiation processing and industrial applications [IND] • Medical and nutritional applications [MED] • Nuclear physics and engineering [PHY] • Nuclear and radiation safety [SAF] • Other related topics [OTH] • Device and instrument presentation [DEV] Awards for outstanding oral and poster presentations will be given to qualified students who present their work during the conference.

  1. Second Karlsruhe international conference on analytical chemistry in nuclear technology

    1989-01-01

    Around 180 abstracts of invited lectures and poster presentations of the international analytical conference are presented in this book. They cover analytical applications throughout the fuel cycle and radioanalysis of manifold materials. Most of the abstracts are prepared separately for input in INIS and EDB. (RB)

  2. International Conference on New Technologies in the Humanities and Fourth International Conference on Optics Within Life Sciences

    Bally, Gert

    1997-01-01

    New high-tech developments in the field of optics show increasing applicability not only in classical technological fields but also in the humanities. This book contains selected contributions to an international, interdisciplinary joint conference on "New Technologies in the Humanities" and "Optics Within Life Sciences". Its objective is to forward interdisciplinary information and communication between specialists in optics as well as in medicine, biology, environmental sciences, and cultural heritage. It is unique as a presentation of new optical technologies for cultural heritage protection. The contributions cover international research activities in the areas of archaeological research and new technologies, holography and interferometry, material analysis, laser cleaning, pattern recognition, unconventional microscopy, spectroscopial techniques, and profilometry.

  3. Dual-Use Space Technology Transfer Conference and Exhibition. Volume 2

    Krishen, Kumar (Compiler)

    1994-01-01

    This is the second volume of papers presented at the Dual-Use Space Technology Transfer Conference and Exhibition held at the Johnson Space Center February 1-3, 1994. Possible technology transfers covered during the conference were in the areas of information access; innovative microwave and optical applications; materials and structures; marketing and barriers; intelligent systems; human factors and habitation; communications and data systems; business process and technology transfer; software engineering; biotechnology and advanced bioinstrumentation; communications signal processing and analysis; medical care; applications derived from control center data systems; human performance evaluation; technology transfer methods; mathematics, modeling, and simulation; propulsion; software analysis and decision tools; systems/processes in human support technology; networks, control centers, and distributed systems; power; rapid development; perception and vision technologies; integrated vehicle health management; automation technologies; advanced avionics; and robotics technologies.

  4. Dual-Use Space Technology Transfer Conference and Exhibition. Volume 1

    Krishen, Kumar (Compiler)

    1994-01-01

    This document contains papers presented at the Dual-Use Space Technology Transfer Conference and Exhibition held at the Johnson Space Center February 1-3, 1994. Possible technology transfers covered during the conference were in the areas of information access; innovative microwave and optical applications; materials and structures; marketing and barriers; intelligent systems; human factors and habitation; communications and data systems; business process and technology transfer; software engineering; biotechnology and advanced bioinstrumentation; communications signal processing and analysis; new ways of doing business; medical care; applications derived from control center data systems; human performance evaluation; technology transfer methods; mathematics, modeling, and simulation; propulsion; software analysis and decision tools systems/processes in human support technology; networks, control centers, and distributed systems; power; rapid development perception and vision technologies; integrated vehicle health management; automation technologies; advanced avionics; ans robotics technologies. More than 77 papers, 20 presentations, and 20 exhibits covering various disciplines were presented b experts from NASA, universities, and industry.

  5. NASA/ESTO investments in remote sensing technologies (Conference Presentation)

    Babu, Sachidananda R.

    2017-02-01

    For more then 18 years NASA Earth Science Technology Office has been investing in remote sensing technologies. During this period ESTO has invested in more then 900 tasks. These tasks are managed under multiple programs like Instrument Incubator Program (IIP), Advanced Component Technology (ACT), Advanced Information Systems Technology (AIST), In-Space Validation of Earth Science Technologies (InVEST), Sustainable Land Imaging - Technology (SLI-T) and others. This covers the whole spectrum of technologies from component to full up satellite in space and software. Over the years many of these technologies have been infused into space missions like Aquarius, SMAP, CYGNSS, SWOT, TEMPO and others. Over the years ESTO is actively investing in Infrared sensor technologies for space applications. Recent investments have been for SLI-T and InVEST program. On these tasks technology development is from simple Bolometers to Advanced Photonic waveguide based spectrometers. Some of the details on these missions and technologies will be presented.

  6. A review of waste heat recovery technologies for maritime applications

    Singh, Dig Vijay; Pedersen, Eilif

    2016-01-01

    Highlights: • Major waste heat sources available on ships have been reviewed. • A review of suitable waste heat recovery systems was conducted for marine vessels. • Technologies have been compared for their potential and suitability for marine use. • Kalina cycle offers the highest potential for marine waste heat recovery. • Turbo compound system most suitable for recovering diesel exhaust pressure energy. - Abstract: A waste heat recovery system produces power by utilizing the heat energy lost to the surroundings from thermal processes, at no additional fuel input. For marine vessels, about 50 percent of the total fuel energy supplied to diesel power-plant aboard is lost to the surroundings. While the total amount of wasted energy is considerable, the quality of this energy is quite low due to its low temperature and has limited potential for power production. Effective waste heat recovery systems use the available low temperature waste heat to produce mechanical/electrical power with high efficiency value. In this study a review of different waste heat recovery systems has been conducted, to lay out the potential recovery efficiencies and suitability for marine applications. This work helps in identifying the most suitable heat recovery technologies for maritime use depending on the properties of shipboard waste heat and achievable recovery efficiencies, whilst discussing the features of each type of system.

  7. Innovative designs and technologies of nuclear power. IV International scientific and technical conference. Book of abstracts

    2016-01-01

    IV International scientific and technical conference “Innovative designs and technologies of nuclear power” has been organized and is conducted by JSC NIKIET with support from Rosatom State Corporation, the International Atomic Energy Agency, the Russian Academy of Sciences and the Nuclear Society of Russia. The conference topics include: innovative designs of nuclear facilities for various applications, nuclear fuel and new materials, closed fuel cycle technologies, SNF and RW management, technological answers to nonproliferation problems, small power reactors (stationary, transportable, floatable, propulsion, space), integrated codes of a new generation for safety analysis of nuclear power plants and fuel cycles, controlled fusion [ru

  8. PROCEEDINGS OF THE 2001 NATIONAL OILHEAT RESEARCH ALLIANCE TECHNOLOGY CONFERENCE HELD AT BROOKHAVEN NATIONAL LABORATORY, UPTON, N.Y., APRIL 30 - MAY 1, 2001.

    MCDONALD, R.J.

    2001-04-30

    BNL is proud to acknowledge all of our 2001 sponsors, with their help and support this has correctly become an oilheat industry conference. It is quite gratifying to see an industry come together to help support an activity like the technology conference, for the benefit of the industry as a whole and to celebrate the beginning of the National Oilheat Research Alliance. This meeting is the fourteenth oil heat industry technology conference to be held since 1984 and the first under a new name, NORA, the National Oilheat research Alliance, and the very first in the new century. The conference is a very important part of the effort in technology transfer, which is supported by the Oilheat Research Program. The Oilheat Research Program at BNL is under the newly assigned program management at the Office of Power Technology within the US DOE. The foremost reason for the conference is to provide a platform for the exchange of information and perspectives among international researchers, engineers, manufacturers, service technicians, and marketers of oil-fired space-conditioning equipment. The conference provides a conduit by which information and ideas can be exchanged to examine present technologies, as well as helping to develop the future course for oil heating advancement. These conferences also serve as a stage for unifying government representatives, researchers, fuel oil marketers, and other members of the oil-heat industry in addressing technology advancements in this important energy use sector. The specific objectives of the conference are to: (1) Identify and evaluate the current state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely; (2) Foster cooperative interactions among federal and industrial representatives for the common goal of sustained economic growth and energy security via energy conservation. Seventeen technical presentations will be made

  9. HTR process heat applications, status of technology and economical potential

    Barnet, H.

    1997-01-01

    The technical and industrial feasibility of the production of high temperature heat from nuclear fuel is presented. The technical feasibility of high temperature heat consuming processes is reviewed and assessed. The conclusion is drawn that the next technological step for pilot plant scale demonstration is the nuclear heated steam reforming process. The economical potential of HTR process heat applications is reviewed: It is directly coupled to the economical competitiveness of HTR electricity production. Recently made statements and pre-conditions on the economic competitiveness in comparison to world market coal are reported. (author). 8 figs

  10. EU-Korea Conference on Science and Technology Closer to Humanity-Greenness

    Lee, Joung Hwan; Kim, Jung-Sik; EU- Korea Conference on Science and Technology

    2010-01-01

    Current research fields in science and technology were presented and discussed at the EKC2008, informing about the interests and directions of the scientists and engineers in EU countries and Korea. The Conference has emerged from the idea of bringing together EU and Korea to get to know each other better, especially in fields of science and technology.

  11. Software Technologies - 8th International Joint Conference, ICSOFT 2013 : Revised Selected Papers

    Cordeiro, José; van Sinderen, Marten J.

    2014-01-01

    The present book includes extended and revised versions of a set of selected papers from the 8th International Joint Conference on Software Technologies (ICSOFT 2013), which was co-organized by the Reykjavik University (RU) and sponsored by the Institute for Systems and Technologies of Information,

  12. 5th International Conference on Advancements of Medicine and Health Care through Technology

    Roman, Nicolae

    2017-01-01

    This volume presents the contributions of the fifth International Conference on Advancements of Medicine and Health Care through Technology (Meditech 2016), held in in Cluj-Napoka, Romania. The papers of this Proceedings volume present new developments in - Health Care Technology, - Medical Devices, Measurement and Instrumentation, - Medical Imaging, Image and Signal Processing, - Modeling and Simulation, - Molecular Bioengineering, - Biomechanics.

  13. 2nd International Conference on Emerging Trends in Electrical, Communication and Information Technologies

    Kumar, Amit; Sankar, V; Rao, N; Sarma, T

    2017-01-01

    This book includes the original, peer-reviewed research from the 2nd International Conference on Emerging Trends in Electrical, Communication and Information Technologies (ICECIT 2015), held in December, 2015 at Srinivasa Ramanujan Institute of Technology, Ananthapuramu, Andhra Pradesh, India. It covers the latest research trends or developments in areas of Electrical Engineering, Electronic and Communication Engineering, and Computer Science and Information.

  14. Proceedings: international conference on transfer of forest science knowledge and technology.

    Cynthia Miner; Ruth Jacobs; Dennis Dykstra; Becky Bittner

    2007-01-01

    This proceedings compiles papers presented by extensionists, natural resource specialists, scientists, technology transfer specialists, and others at an international conference that examined knowledge and technology transfer theories, methods, and case studies. Theory topics included adult education, applied science, extension, diffusion of innovations, social...

  15. IFLA General Conference, 1986. Special Libraries Division. Section: Science and Technology Libraries. Papers.

    International Federation of Library Associations and Institutions, The Hague (Netherlands).

    Papers on science and technology libraries which were presented at the 1986 International Federation of Library Associations (IFLA) conference include: (1) "Online Information Service of the Japan Information Center of Science and Technology" (Ryuko Igarashi, Japan); (2) "A View from the Chip--The Influence of Information…

  16. Development of glass fibre reinforced composites using microwave heating technology

    Köhler, T.; Vonberg, K.; Gries, T.; Seide, G.

    2017-10-01

    Fibre reinforced composites are differentiated by the used matrix material (thermoplastic versus duroplastic matrix) and the level of impregnation. Thermoplastic matrix systems get more important due to their suitability for mass production, their good shapeability and their high impact resistance. A challenge in the processing of these materials is the reduction of the melt flow paths of the thermoplastic matrix. The viscosity of molten thermoplastic material is distinctly higher than the viscosity of duroplastic material. An approach to reduce the flow paths of the thermoplastic melt is given by a commingling process. Composites made from commingling hybrid yarns consist of thermoplastic and reinforcing fibres. Fabrics made from these hybrid yarns are heated and consolidated by the use of heat pressing to form so called organic sheets. An innovative heating system is given by microwaves. The advantage of microwave heating is the volumetric heating of the material, where the energy of the electromagnetic radiation is converted into thermal energy inside the material. In this research project microwave active hybrid yarns are produced and examined at the Institute for Textile Technology of RWTH Aachen University (ITA). The industrial research partner Fricke und Mallah Microwave Technology GmbH, Peine, Germany develops an innovative pressing systems based on a microwave heating system. By implementing the designed microwave heating technology into an existing heat pressing process, FRTCs are being manufactured from glass and nanomodified polypropylene fibre woven fabrics. In this paper the composites are investigated for their mechanical and optical properties.

  17. The 1995 Goddard Conference on Space Applications of Artificial Intelligence and Emerging Information Technologies

    Hostetter, Carl F. (Editor)

    1995-01-01

    This publication comprises the papers presented at the 1995 Goddard Conference on Space Applications of Artificial Intelligence and Emerging Information Technologies held at the NASA/Goddard Space Flight Center, Greenbelt, Maryland, on May 9-11, 1995. The purpose of this annual conference is to provide a forum in which current research and development directed at space applications of artificial intelligence can be presented and discussed.

  18. PREFACE: 2nd International Conference on Innovative Materials, Structures and Technologies

    Ručevskis, Sandris

    2015-11-01

    The 2nd International Conference on Innovative Materials, Structures and Technologies (IMST 2015) took place in Riga, Latvia from 30th September - 2nd October, 2015. The first event of the conference series, dedicated to the 150th anniversary of the Faculty of Civil Engineering of Riga Technical University, was held in 2013. Following the established tradition, the aim of the conference was to promote and discuss the latest results of industrial and academic research carried out in the following engineering fields: analysis and design of advanced structures and buildings; innovative, ecological and energy efficient building materials; maintenance, inspection and monitoring methods; construction technologies; structural management; sustainable and safe transport infrastructure; and geomatics and geotechnics. The conference provided an excellent opportunity for leading researchers, representatives of the industrial community, engineers, managers and students to share the latest achievements, discuss recent advances and highlight the current challenges. IMST 2015 attracted over 120 scientists from 24 countries. After rigorous reviewing, over 80 technical papers were accepted for publication in the conference proceedings. On behalf of the organizing committee I would like to thank all the speakers, authors, session chairs and reviewers for their efficient and timely effort. The 2nd International Conference on Innovative Materials, Structures and Technologies was organized by the Faculty of Civil Engineering of Riga Technical University with the support of the Latvia State Research Programme under the grant agreement "INNOVATIVE MATERIALS AND SMART TECHNOLOGIES FOR ENVIRONMENTAL SAFETY, IMATEH". I would like to express sincere gratitude to Juris Smirnovs, Dean of the Faculty of Civil Engineering, and Andris Chate, manager of the Latvia State Research Programme. Finally, I would like to thank all those who helped to make this event happen. Special thanks go to Diana

  19. The 17th Annual Magnet Technology Conference Hosted By CERN Is Proving That Opposites Attract...

    2001-01-01

    Hundreds were drawn together by the 17th Magnet Technology Conference, the largest conference devoted to magnets in the world. Thirty-six years ago about 50 physicists and engineers came together at SLAC, Stanford, to have a symposium on magnet technology. Simple as it seemed at the moment, it was the first time that anyone seriously considered building superconducting magnets and was the birth of the Magnet Technology (MT) conference. The conference has occurred every two years since that time and had its most recent incarnation, MT-17, hosted by CERN just last week at the International Conference Centre here in Geneva. With so much innovative work being done with magnets in the LHC and its experiments (ATLAS, CMS, Alice and LHCb), having an MT conference hosted by CERN in Geneva was expected. However, what was not expected was the level of interest with which MT-17 was met. 'We are victims of our own success', says Romeo Perin who was one of the 50 physicists/engineers who attended the Stanford symposium a...

  20. Six phase soil heating. Innovative technology summary report

    1995-04-01

    Six Phase Soil Heating (SPSH) was developed to remediate soils contaminated with volatile and semi-volatile organic compounds. SPSH is designed to enhance the removal of contaminates from the subsurface during soil vapor extraction. The innovation combines an emerging technology, six-phase electric heating, with a baseline technology, soil vapor extraction, to produce a more efficient in situ remediation systems for difficult soil and/or contaminate applications. This document describes the technology and reports on field demonstrations conducted at Savannah River and the Hanford Reservation

  1. Proceedings of the 3. nuclear science and technology conference

    1990-01-01

    Non-power applications of nuclear technology in medicine, agriculture and industry are discussed. These applications include irradiation of food for desinfestation; tram technologies used in diagnosis and therapy and radiation chemistry important to industrial processes. Some technologies which evolved from the development of the nuclear power industry are also discussed

  2. FOREWORD: 9th Curtin University of Technology Science and Engineering International Conference 2014 (CUTSE2014)

    Chieng Chen, Vincent Lee

    2015-04-01

    A very warm welcome to all participants of the 9th Curtin University Technology, Science and Engineering (CUTSE) Conference 2014. This annual conference dates back to 2006 when the first Curtin University of Technology Science and Engineering (CUTSE) Conference was held in Curtin University, Miri Sarawak. CUTSE Conference was initially intended for Curtin's undergraduates such that they are able to experience the presentation of their work in a conference environment. As time passes and following the urge of knowledge dissemination, CUTSE Conference is hence open to public. This year the Department of Mechanical Engineering has been given the honour to organize the 9th CUTSE Conference. It has been a pleasure to watch CUTSE grow from strength to strength over the years. This year, our theme is "Discovering, Innovating and Engineering". We hope that it is in this spirit that CUTSE participants may align their respective work, such that we all aim for a greater and better implementation of "Discovering, Innovating and Engineering". The 9th CUTSE Conference 2014 is an excellent avenue for researchers, engineers, scientists, academicians, professionals from industry and students to share their research findings and initiate further collaborations in their respective fields. Parallel sessions in Mechanical, Electrical, Computer, Civil and Chemical engineering as well as the sciences will be hosted over a period of two days. Each year, the conference attracts participation from a number of countries in addition to Malaysia and Australia. In addition, student participants will get the opportunity to present their research projects and gain valuable feedback from industry professionals. This year the Conference will be organised by the Department of Mechanical Engineering of Curtin Sarawak's School of Engineering and Science in collaboration with The Institute of Engineers Malaysia, Miri Branch. On behalf of the organizing committee, I would like to thank this year

  3. Proceedings of the International Conferences on Internet Technologies & Society (ITS), Education Technologies (ICEduTECH), and Sustainability, Technology and Education (STE) (Melbourne, Australia, December 6-8, 2016)

    Kommers, Piet, Ed.; Issa, Tomayess, Ed.; Issa, Theodora, Ed.; McKay, Elspeth, Ed.; Isias, Pedro, Ed.

    2016-01-01

    These proceedings contain the papers and posters of the International Conferences on Internet Technologies & Society (ITS 2016), Educational Technologies (ICEduTech 2016) and Sustainability, Technology and Education (STE 2016), which have been organised by the International Association for Development of the Information Society and…

  4. Proceedings of the 1999 Oil and Gas Conference: Technology Options for Producer Survival

    None available

    2000-04-12

    The 1999 Oil & Gas Conference was cosponsored by the U.S. Department of Energy (DOE), Office of Fossil Energy, Federal Energy Technology Center (FETC) and National Petroleum Technology Office (NPTO) on June 28 to 30 in Dallas, Texas. The Oil & Gas Conference theme, Technology Options for Producer Survival, reflects the need for development and implementation of new technologies to ensure an affordable, reliable energy future. The conference was attended by nearly 250 representatives from industry, academia, national laboratories, DOE, and other Government agencies. Three preconference workshops (Downhole Separation Technologies: Is it Applicable for Your Operations, Exploring and developing Naturally Fractured Low-Permeability Gas Reservoirs from the Rocky Mountains to the Austin Chalk, and Software Program Applications) were held. The conference agenda included an opening plenary session, three platform sessions (Sessions 2 and 3 were split into 2 concurrent topics), and a poster presentation reception. The platform session topics were Converting Your Resources Into Reserves (Sessions 1 and 2A), Clarifying Your Subsurface Vision (Session 2B), and High Performance, Cost Effective Drilling, Completion, Stimulation Technologies (Session 3B). In total, there were 5 opening speakers, 30 presenters, and 16 poster presentations.

  5. Summary of the second international conference on electrostatic accelerator technology

    Wegner, H.E.

    1977-01-01

    A review is given of the history of electrostatic accelerator technology, including a technology assessment of acceleration tubes, vacuum systems, voltage gradients, charging systems, and ion sources. Improvements in the performance of electrostatic accelerators during the last four years and of those currently under construction are discussed. The improved performance has greatly expanded the heavy ion research capabilities of the entire research community

  6. A southern region conference on technology transfer and extension

    Sarah F. Ashton; William G. Hubbard; H. Michael Rauscher

    2009-01-01

    Forest landowners and managers have different education and technology transfer needs and preferences. To be effective it is important to use a multi-faceted science delivery/technology transfer program to reach them. Multi-faceted science delivery programs can provide similar content over a wide range of mechanisms including printed publications, face-to-face...

  7. W7-AS contributions to: 10. topical conference on radio frequency power in plasmas, Boston, 1993 - Local transport studies on fusion plasmas, Varenna, 1993 - 5. European theory conference, El Escorial, 1993 - 4. int. workshop on plasma edge theory in fusion devices, Varenna, 1993 - 5. international Toki conference on plasma physics and controlled nuclear fusion, physics and technology of plasma heating and current drive, Toki, 1993

    1994-03-01

    The report contains the following contribution (titles and authors): High Power 140 GHz ECRH Experiments on W7-AS (V. Erckmann); Heat Wave Studies on W7-AS Stellarator (H.J. Hartfuss); Evidence for Temperature Fluctuations in the W7-AS Stellarator (H.J. Hartfuss); Transient Transport Studies in W7-AS (U. Stroth); Open Magnetic Surfaces for Modelling Plasma Transport in the Boundary of Stellarators (F. Sardei); Electron Cyclotron Current Drive and Bootstrap Current (U. Gasparino); Parametrization of Open Magnetic Structures for Modelling Plasma Transport in the Boundary of W7-AS (F. Sardei); 140 GHz ECRH Experiments at the W7-AS Stellarator (V. Erckmann); H.-Mode of W7-AS Stellarator (F. Wagner); New Subjects of H-Mode (F. Wagner); Recent Results with 140 GHz ECRH at the W7-AS Stellarator (V. Erckmann). (orig./HP)

  8. Quantum technology past, present, future: quantum energetics (Conference Presentation)

    Choi, Sang H.

    2017-04-01

    Since the development of quantum physics in the early part of the 1900s, this field of study has made remarkable contributions to our civilization. Some of these advances include lasers, light-emitting diodes (LED), sensors, spectroscopy, quantum dots, quantum gravity and quantum entanglements. In 1998, the NASA Langley Research Center established a quantum technology committee to monitor the progress in this area and initiated research to determine the potential of quantum technology for future NASA missions. The areas of interest in quantum technology at NASA included fundamental quantum-optics materials associated with quantum dots and quantum wells, device-oriented photonic crystals, smart optics, quantum conductors, quantum information and computing, teleportation theorem, and quantum energetics. A brief review of the work performed, the progress made in advancing these technologies, and the potential NASA applications of quantum technology will be presented.

  9. Conference on Future Automotive Technology Focus Electro Mobility

    2013-01-01

    The increasing trend towards electric cars leads to several challenges for the automobile industry, research institutes and politics as well as for the society. Research and serial development move closer together to meet automotive standards with new components such as traction batteries integrated into hybrid and electrical drivetrains. Furthermore, the influence of e-mobility on the daily mobility behavior, the effects on the automotive supply chain and the impact on industrial production have to be taken into account. According to these complex aspects it is crucial to not only acquire specific knowledge in the particular fields but also to consider their functional interaction. Therefore, it seems essential to merge competence from science, economy and politics. This year, the annual „Conference on Future Automotive Technology“ as the follow-up of the „2. Automobiltechnisches Kolloquium München” focuses on the economical realization of widespread automotive electro mobility. Contents - Energy St...

  10. Heat Pipe-Assisted Thermoelectric Power Generation Technology for Waste Heat Recovery

    Jang, Ju-Chan; Chi, Ri-Guang; Rhi, Seok-Ho; Lee, Kye-Bock; Hwang, Hyun-Chang; Lee, Ji-Su; Lee, Wook-Hyun

    2015-06-01

    Currently, large amounts of thermal energy dissipated from automobiles are emitted through hot exhaust pipes. This has resulted in the need for a new efficient recycling method to recover energy from waste hot exhaust gas. The present experimental study investigated how to improve the power output of a thermoelectric generator (TEG) system assisted by a wickless loop heat pipe (loop thermosyphon) under the limited space of the exhaust gas pipeline. The present study shows a novel loop-type heat pipe-assisted TEG concept to be applied to hybrid vehicles. The operating temperature of a TEG's hot side surface should be as high as possible to maximize the Seebeck effect. The present study shows a novel TEG concept of transferring heat from the source to the sink. This technology can transfer waste heat to any local place with a loop-type heat pipe. The present TEG system with a heat pipe can transfer heat and generate an electromotive force power of around 1.3 V in the case of 170°C hot exhaust gas. Two thermoelectric modules (TEMs) for a conductive block model and four Bi2Te3 TEMs with a heat pipe-assisted model were installed in the condenser section. Heat flows to the condenser section from the evaporator section connected to the exhaust pipe. This novel TEG system with a heat pipe can be placed in any location on an automobile.

  11. Federal technology alert. Parabolic-trough solar water heating

    NONE

    1998-04-01

    Parabolic-trough solar water heating is a well-proven renewable energy technology with considerable potential for application at Federal facilities. For the US, parabolic-trough water-heating systems are most cost effective in the Southwest where direct solar radiation is high. Jails, hospitals, barracks, and other facilities that consistently use large volumes of hot water are particularly good candidates, as are facilities with central plants for district heating. As with any renewable energy or energy efficiency technology requiring significant initial capital investment, the primary condition that will make a parabolic-trough system economically viable is if it is replacing expensive conventional water heating. In combination with absorption cooling systems, parabolic-trough collectors can also be used for air-conditioning. Industrial Solar Technology (IST) of Golden, Colorado, is the sole current manufacturer of parabolic-trough solar water heating systems. IST has an Indefinite Delivery/Indefinite Quantity (IDIQ) contract with the Federal Energy Management Program (FEMP) of the US Department of Energy (DOE) to finance and install parabolic-trough solar water heating on an Energy Savings Performance Contract (ESPC) basis for any Federal facility that requests it and for which it proves viable. For an ESPC project, the facility does not pay for design, capital equipment, or installation. Instead, it pays only for guaranteed energy savings. Preparing and implementing delivery or task orders against the IDIQ is much simpler than the standard procurement process. This Federal Technology Alert (FTA) of the New Technology Demonstration Program is one of a series of guides to renewable energy and new energy-efficient technologies.

  12. Proceedings of the 2002 climate change and GHG technology conference and tradeshow

    2002-01-01

    The emphasis of this conference and tradeshow was to provide all participants, from corporate planners and decision makers to technical staff and technology solution providers, with a forum where they could exchange views concerning economical climate change technology solutions applicable to the oil and gas, oilsands, coal, mining, pipeline and petrochemical industries operating in Western Canada. There were six major objectives for this conference: (1) disseminate information with regard to how implementing climate change and greenhouse gas technologies and associated projects can improve financial and environmental performance, (2) look at case studies on economical climate change and greenhouse gas technologies and projects that have helped organizations improve their environmental and economical performance, (3) stimulate the launch of new projects and partnerships and further advance existing projects, (4) identify and facilitate new opportunities for implementation of climate change and greenhouse gas technologies and projects in the long term, (5) participate in a tradeshow as a greenhouse gas technology supplier or customer, and (6) network with other industry representatives. Six half-day sessions comprised the conference with topics as follows: session 1 dealt with business risk, economics and opportunities, session 2 discussed fugitive emissions and energy efficiency, session 3 was concerned with carbon dioxide capture, transportation, storage and use, session 4 was devoted to flaring and venting, session 5 dealt with long-term verification and monitoring technologies, and session 6 included additional technology solution presentations. refs., tabs., figs

  13. Proceedings of a Conference on Telecommunication Technologies, Networkings and Libraries

    Knight, N. K.

    1981-12-01

    Current and developing technologies for digital transmission of image data likely to have an impact on the operations of libraries and information centers or provide support for information networking are reviewed. Technologies reviewed include slow scan television, teleconferencing, and videodisc technology and standards development for computer network interconnection through hardware and software, particularly packet switched networks computer network protocols for library and information service applications, the structure of a national bibliographic telecommunications network; and the major policy issues involved in the regulation or deregulation of the common communications carriers industry.

  14. Advances in Computing and Information Technology : Proceedings of the Second International Conference on Advances in Computing and Information Technology

    Nagamalai, Dhinaharan; Chaki, Nabendu

    2013-01-01

    The international conference on Advances in Computing and Information technology (ACITY 2012) provides an excellent international forum for both academics and professionals for sharing knowledge and results in theory, methodology and applications of Computer Science and Information Technology. The Second International Conference on Advances in Computing and Information technology (ACITY 2012), held in Chennai, India, during July 13-15, 2012, covered a number of topics in all major fields of Computer Science and Information Technology including: networking and communications, network security and applications, web and internet computing, ubiquitous computing, algorithms, bioinformatics, digital image processing and pattern recognition, artificial intelligence, soft computing and applications. Upon a strength review process, a number of high-quality, presenting not only innovative ideas but also a founded evaluation and a strong argumentation of the same, were selected and collected in the present proceedings, ...

  15. 2nd International Conference on Robot Intelligence Technology and Applications

    Matson, Eric; Myung, Hyun; Xu, Peter; Karray, Fakhri

    2014-01-01

    We are facing a new technological challenge on how to store and retrieve knowledge and manipulate intelligence for autonomous services by intelligent systems which should be capable of carrying out real world tasks autonomously. To address this issue, robot researchers have been developing intelligence technology (InT) for “robots that think” which is in the focus of this book. The book covers all aspects of intelligence from perception at sensor level and reasoning at cognitive level to behavior planning at execution level for each low level segment of the machine. It also presents the technologies for cognitive reasoning, social interaction with humans, behavior generation, ability to cooperate with other robots, ambience awareness, and an artificial genome that can be passed on to other robots. These technologies are to materialize cognitive intelligence, social intelligence, behavioral intelligence, collective intelligence, ambient intelligence and genetic intelligence. The book aims at serving resear...

  16. 9th Annual Science and Engineering Technology Conference

    2008-04-17

    does it all: TV, Internet,  Phone,  Music , Data, Computing Source: “Millennial: About them” Navy Recruiting Command briefing, 7 Feb 2008 Millennials...global actors – Technology investment geared to empower the individual - personal transportation, communications, finance, entertainment , health care...gadgets are poised for debut in U.S. and European markets Technology Review November 06, 2006 Sony : 1,000,000:1 OLED TV on sale in 2007 Engadget

  17. Proceedings of the 2. IASTED international conference on advanced technology in the environmental field

    Ubertini, L.

    2006-01-01

    This international conference provided a forum for representatives from academic institutions, government agencies, and industries to discuss emerging technologies in the environmental field. Recent developments in physico-chemical remediation technologies were reviewed, as well as strategies related to waste water treatment in urban and coastal regions. Advances in bio-plastics and bio-hydrogen production were also discussed along with various bioremediation techniques. Strategies related to urban drainage and wetland management were presented together with issues related to energy efficiency and ecological sustainability. The conference was divided into 6 sections: (1) wastewater treatment and reuse; (2) biotechnology, bioremediation and biomass; (3) integrated water resources management; (4) alternative energy systems; (5) decision support tools; and (6) groundwater and soil remediation. The conference featured 48 presentations, of which 9 have been catalogued separately for inclusion in this database. refs., tabs., figs

  18. 1st International Scientific Conference on Intelligent Information Technologies for Industry

    Kovalev, Sergey; Tarassov, Valery; Snášel, Václav

    2016-01-01

    This volume of Advances in Intelligent Systems and Computing contains papers presented in the main track of IITI 2016, the First International Conference on Intelligent Information Technologies for Industry held in May 16-21 in Sochi, Russia. The conference was jointly co-organized by Rostov State Transport University (Russia) and VŠB – Technical University of Ostrava (Czech Republic) with the participation of Russian Association for Artificial Intelligence (RAAI) and Russian Association for Fuzzy Systems and Soft Computing (RAFSSC). The volume is devoted to practical models and industrial applications related to intelligent information systems. The conference has been a meeting point for researchers and practitioners to enable the implementation of advanced information technologies into various industries. Nevertheless, some theoretical talks concerning the-state-of-the-art in intelligent systems and soft computing are included in the proceedings as well.

  19. Proceedings of the 12. international conference on mechatronics technology : ICMT 2008

    NONE

    2008-07-01

    The theme for the 2008 international conference on mechatronics technology (ICMT) was the applications of mechatronics to natural resources to address the growing energy demands that the world will face in the future. It was attended by researchers, engineers and practitioners who presented the latest accomplishments, innovations and potential future directions in mechatronics and emerging application trends. The objective of ICMT 2008 was to facilitate dialogue among experts on issues relating to research and technological developments in mechatronics. The sessions of the conference were entitled: advanced mechatronic devices; bioengineering; human resource development and education; information and networking; mechatronic sensing and control; mechantronics and natural resources; micro-electro-mechanical systems and nano-electro-mechanical systems (MEMS-NEMS); and production systems. The conference featured 44 presentations, of which 4 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  20. Proceedings of the 2. IASTED international conference on advanced technology in the environmental field

    Ubertini, L. [IRPI National Research Council, Rome (Italy)] (ed.)

    2006-07-01

    This international conference provided a forum for representatives from academic institutions, government agencies, and industries to discuss emerging technologies in the environmental field. Recent developments in physico-chemical remediation technologies were reviewed, as well as strategies related to waste water treatment in urban and coastal regions. Advances in bio-plastics and bio-hydrogen production were also discussed along with various bioremediation techniques. Strategies related to urban drainage and wetland management were presented together with issues related to energy efficiency and ecological sustainability. The conference was divided into 6 sections: (1) wastewater treatment and reuse; (2) biotechnology, bioremediation and biomass; (3) integrated water resources management; (4) alternative energy systems; (5) decision support tools; and (6) groundwater and soil remediation. The conference featured 48 presentations, of which 9 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  1. AMA Conferences 2015. SENSOR 2015. 17th international conference on sensors and measurement technology. IRS2 2015. 14th international conference on infrared sensors and systems. Proceedings

    2015-01-01

    This meeting paper contains presentations of two conferences: SENSOR 2015 and IRS 2 (= International conference on InfraRed Sensors and systems). The first part of SENSOR 2015 contains the following chapters: (A) SENSOR PRINCIPLES: A.1: Mechanical sensors; A.2: Optical sensors; A.3: Ultrasonic sensors; A.4: Microacoustic sensors; A.5: Magnetic sensors; A.6: Impedance sensors; A.7: Gas sensors; A.8: Flow sensors; A.9: Dimensional measurement; A.10: Temperature and humidity sensors; A.11: Chemosensors; A.12: Biosensors; A.13: Embedded sensors; A.14: Sensor-actuator systems; (B) SENSOR TECHNOLOGY: B.1: Sensor design; B.2: Numerical simulation of sensors; B.3: Sensor materials; B.4: MEMS technology; B.5: Micro-Nano-Integration; B.6: Packaging; B.7: Materials; B.8: Thin films; B.9: Sensor production; B.10: Sensor reliability; B.11: Calibration and testing; B.12: Optical fibre sensors. (C) SENSOR ELECTRONICS AND COMMUNICATION: C.1: Sensor electronics; C.2: Sensor networks; C.3: Wireless sensors; C.4: Sensor communication; C.5: Energy harvesting; C.6: Measuring systems; C.7: Embedded systems; C.8: Self-monitoring and diagnosis; (D) APPLICATIONS: D.1: Medical measuring technology; D.2: Ambient assisted living; D.3: Process measuring technology; D.4: Automotive; D.5: Sensors in energy technology; D.6: Production technology; D.7: Security technology; D.8: Smart home; D.9: Household technology. The second part with the contributions of the IRS 2 2015 is structured as follows: (E) INFRARED SENSORS: E.1: Photon detectors; E.2: Thermal detectors; E.3: Cooled detectors; E.4: Uncooled detectors; E.5: Sensor modules; E.6: Sensor packaging. (G) INFRARED SYSTEMS AND APPLICATIONS: G.1: Thermal imaging; G.2: Pyrometry / contactless temperature measurement; G.3: Gas analysis; G.4: Spectroscopy; G.5: Motion control and presence detection; G.6: Security and safety monitoring; G.7: Non-destructive testing; F: INFRARED SYSTEM COMPONENTS: F.1: Infrared optics; F.2: Optical modulators; F.3

  2. International Conference on Sustainable Vital Technologies in Engineering and Informatics

    Hassan, Maguid

    2017-01-01

    This book reports on cutting-edge technologies that have been fostering sustainable development in a variety of fields, including built and natural environments, structures, energy, advanced mechanical technologies as well as electronics and communication technologies. It reports on the applications of Geographic Information Systems (GIS), Internet-of-Things, predictive maintenance, as well as modeling and control techniques to reduce the environmental impacts of buildings, enhance their environmental contribution and positively impact the social equity. The different chapters, selected on the basis of their timeliness and relevance for an audience of engineers and professionals, describe the major trends in the field of sustainable engineering research, providing them with a snapshot of current issues together with important technical information for their daily work, as well as an interesting source of new ideas for their future research. The works included in this book were selected among the contributions...

  3. Proceedings of the 5. biennial international pipeline conference, IPC 2004 : the power of technology

    Paulson, K.; Kraft, H.; Hopkins, P.

    2004-01-01

    The fifth international pipeline conference provided a forum for experts in the pipeline industry, academia and governments to discuss new technologies and approaches to pipeline transport. Presentations focused on a wide range of issues related to pipeline engineering. The conference was divided into 16 main sessions: (1) compression and pump technologies, (2) corrosion protection and analysis techniques, (3) pipeline design and construction, (4) environmental issues, (5) database development, (6) emerging issues and innovative projects, (7) inspection techniques, (8) integrity management, (9) joining, (10) materials, (11) offshore issues, (12) operations and maintenance, (13) pipeline automation and measurement, (14) pipelining in northern environments, (15) risk and reliability, (16) standards and regulations. The presentations provided up-to-date information related to future technology trends as well as recent innovations and practices. Pipeline design standards and new pipeline materials using high strength steels and reinforced composite plastic coatings were also reviewed. Other sessions discussed emerging technologies for inspection, quality control, ultrasonic testing, and the use of remote sensors. The conference also included a student paper competition. A total of 339 peer reviewed presentations were given at the conference, all of which were indexed separately for inclusion in this database. refs., tabs., fig.

  4. Proceedings of the 2nd Mediterranean Conference on Information Technology Applications (ITA '97)

    Spyrou, S.

    1997-01-01

    This is the proceedings of the 2nd Mediterranean Conference on Information Technology Applications, held in Nicosia, Cyprus, between 6-7 November, 1997. It contains 16 papers. Two of these fall within the scope of INIS and are dealing with Telemetry, Radiation Monitoring, Environment Monitoring, Radiation Accidents, Air Pollution Monitoring, Diagnosis, Computers, Radiology and Data Processing

  5. Proceedings of the second nuclear science and technology conference no. 2

    1988-01-01

    This conference includes papers on a broad range of applications for nuclear technologies. Some of the topics covered are the electron beam and its applications, nuclear applications in industry, nuclear chemistry, radiobiology for the environment, and significant developments in nuclear medicine

  6. Proceedings of the 2nd Mediterranean Conference on Information Technology Applications (ITA `97)

    Spyrou, S [ed.

    1998-12-31

    This is the proceedings of the 2nd Mediterranean Conference on Information Technology Applications, held in Nicosia, Cyprus, between 6-7 November, 1997. It contains 16 papers. Two of these fall within the scope of INIS and are dealing with Telemetry, Radiation Monitoring, Environment Monitoring, Radiation Accidents, Air Pollution Monitoring, Diagnosis, Computers, Radiology and Data Processing.

  7. IFLA General Conference, 1985. Division on Special Libraries. Section on Science and Technology Libraries. Papers.

    International Federation of Library Associations, The Hague (Netherlands).

    Papers on science and technology libraries which were presented at the 1985 International Federation of Library Associations (IFLA) conference include: (1) "UAP (Universal Availability of Publications) and User Training for Categories of Grey Literature" (Dieter Schmidmaier, Mining Academy Freiberg, East Germany); (2) "Resource…

  8. Proceedings of the sixteenth international conference on coal and slurry technologies

    Anon.

    1991-01-01

    The proceedings of this conference are grouped under the following headings: Update in operating slurry pipeline systems; Environmental aspects; Materials and equipment; Indirect coal, liquefaction, Pipeline technology; Coal preparation and beneficiation; Direct coal liquefaction; Rheology characterization and formulation; Atomization and combustion; Demonstrations and evaluations; Small scale applications

  9. Proceedings of the environmental technology through industry partnership conference. Volume 1

    Kothari, V.P.

    1995-10-01

    The overall objective of this conference was to review the latest environmental and waste management technologies being developed under the sponsorship of METC. The focus of this conference was also to address the accomplishments and barriers affecting private sector, and lay the groundwork for future technology development initiatives and opportunities. 26 presentations were presented in: Mixed waste characterization, treatment, and disposal; Contaminant plume containment and remediation; and Decontamination and decommissioning. In addition there were 10 Focus Area presentations, 31 Poster papers covering all Focus Areas, and two panel discussions on: Mixed waste characterization, treatment, and disposal issues; and the application, evaluation, and acceptance of in-situ and ex-situ plume remediation technologies. Volume 1 contains the keynote address, 15 poster papers, 5 papers on mixed waste characterization, treatment, and disposal, and 13 papers on decontamination and decommissioning. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database

  10. 26th Conference of Spacecraft TT&C Technology in China

    Qian, Weiping

    2013-01-01

    Proceedings of the 26th Conference of Spacecraft TT&C Technology in China collects selected papers from the 26th Conference of Spacecraft TT&C Technology in China held in Nanjing on October 16-19, 2012. The book features state-of-the-art studies on spacecraft TT&C in China with the theme of “Shared and Flexible TT&C Systems”. The selected works can help  promote development of spacecraft TT&C technology towards interconnectivity, resource sharing, flexibility and high efficiency. Researchers and engineers in the field of aerospace engineering and communication engineering can benefit from the book. Rongjun Shen is the Academician of Chinese Academy of Engineering; Weiping Qian is the Director General of Beijing Institute of Tracking and Telecommunications Technology.

  11. Proceedings of the environmental technology through industry partnership conference. Volume 2

    Kothari, V.P.

    1995-10-01

    The overall objective of this conference was to review the latest environmental and waste management technologies being developed under the sponsorship of METC. The focus of this conference was also to address the accomplishments and barriers affecting private sector, and lay the groundwork for future technology development initiatives and opportunities. 26 presentations were presented in: Mixed waste characterization, treatment, and disposal; Contaminant plume containment and remediation; and Decontamination and decommissioning. In addition there were 10 Focus Area presentations, 31 Poster papers covering all Focus Areas, and two panel discussions on: Mixed waste characterization, treatment, and disposal issues; and the Application, evaluation, and acceptance of in-situ and ex-situ plume remediation technologies. Volume 2 contains 16 papers in a poster session and 8 papers in the contaminant plume containment and remediation and landfill stabilization Focus Areas. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  12. Proceedings of the environmental technology through industry partnership conference. Volume 1

    Kothari, V.P.

    1995-10-01

    The overall objective of this conference was to review the latest environmental and waste management technologies being developed under the sponsorship of METC. The focus of this conference was also to address the accomplishments and barriers affecting private sector, and lay the groundwork for future technology development initiatives and opportunities. 26 presentations were presented in: Mixed waste characterization, treatment, and disposal; Contaminant plume containment and remediation; and Decontamination and decommissioning. In addition there were 10 Focus Area presentations, 31 Poster papers covering all Focus Areas, and two panel discussions on: Mixed waste characterization, treatment, and disposal issues; and the application, evaluation, and acceptance of in-situ and ex-situ plume remediation technologies. Volume 1 contains the keynote address, 15 poster papers, 5 papers on mixed waste characterization, treatment, and disposal, and 13 papers on decontamination and decommissioning. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  13. International Conference on Computer Science and Information Technology

    Li, Xiaolong

    2014-01-01

    The main objective of CSAIT 2013 is to provide a forum for researchers, educators, engineers and government officials involved in the general areas of Computational Sciences and Information Technology to disseminate their latest research results and exchange views on the future research directions of these fields. A medium like this provides an opportunity to the academicians and industrial professionals to exchange and integrate practice of computer science, application of the academic ideas, improve the academic depth. The in-depth discussions on the subject provide an international communication platform for educational technology and scientific research for the world's universities, engineering field experts, professionals and business executives.

  14. Technology Roadmaps: Energy-efficient Buildings: Heating and Cooling Equipment

    NONE

    2011-07-01

    Buildings account for almost a third of final energy consumption globally and are an equally important source of CO2 emissions. Currently, both space heating and cooling as well as hot water are estimated to account for roughly half of global energy consumption in buildings. Energy-efficient and low/zero-carbon heating and cooling technologies for buildings have the potential to reduce CO2 emissions by up to 2 gigatonnes (Gt) and save 710 million tonnes oil equivalent (Mtoe) of energy by 2050. Most of these technologies -- which include solar thermal, combined heat and power (CHP), heat pumps and thermal energy storage -- are commercially available today. The Energy-Efficient Buildings: Heating and Cooling Equipment Roadmap sets out a detailed pathway for the evolution and deployment of the key underlying technologies. It finds that urgent action is required if the building stock of the future is to consume less energy and result in lower CO2 emissions. The roadmap concludes with a set of near-term actions that stakeholders will need to take to achieve the roadmap's vision.

  15. Compact heat exchanger technologies for the HTRs recuperator application

    Thonon, B.; Breuil, E.

    2001-01-01

    Modern HTR nuclear power plants which are now under development (projects GT-MHR, PBMR) are based on the direct cycle concept. This concept leads to a more important efficiency compared to the steam cycle but requires the use of high performance components such as an helium/helium heat exchanger called recuperator to guarantee the cycle efficiency. Using this concept, a net plant efficiency of around 50% can be achieved in the case of an electricity generating plant. As geometric constraints are particularly important for such a gas reactor to limit the size of the primary vessels, compact heat exchangers operating at high pressure and high temperature are attractive potential solutions for the recuperator application. In this frame, Framatome and CEA have reviewed the various technologies of compact heat exchangers used in industry. The first part of the paper will give a short description of the heat exchangers technologies and their ranges of application. In a second part, a selection of potential compact heat exchangers technologies are proposed for the recuperator application. This selection will be based upon their capabilities to cope with the operating conditions parameters (pressure, temperature, flow rate) and with other parameters such as fouling, corrosion, compactness, weight, maintenance and reliability. (author)

  16. Abstracts of the international scientific-practical conference on space research, technology and conversion-II

    1997-04-01

    The International Conference on space research, technology and conversion-II was held on 16-18 April, 1997 in Tashkent, Uzbekistan. The specialists discussed various aspects of space research, technology and conversion problems. More than 60 talks were presented in the meeting on the following subjects: remote sensing and the processing of satellite information; space navigation and others, including radiation effects in silicon solar cells caused by cosmic radiation. (A.A.D.)

  17. International Conference on Emerging Technologies for Information Systems, Computing, and Management

    Ma, Tinghuai; Emerging Technologies for Information Systems, Computing, and Management

    2013-01-01

    This book aims to examine innovation in the fields of information technology, software engineering, industrial engineering, management engineering. Topics covered in this publication include; Information System Security, Privacy, Quality Assurance, High-Performance Computing and Information System Management and Integration. The book presents papers from The Second International Conference for Emerging Technologies Information Systems, Computing, and Management (ICM2012) which was held on December 1 to 2, 2012 in Hangzhou, China.

  18. Proceedings of the second biennial international conference on nascent technologies in engineering: souvenir

    2017-01-01

    This conference touches upon the different aspects of engineering and related technologies. The topics covered are: structural control, dynamics and health monitoring; manufacturing and management strategies; thermal engineering and fluid dynamics; power systems; electrical machines and drives; power electronics and energy conversion; signal processing; embedded system; communication engineering; networking/ analysis and design of algorithms; security and information and computer technologies. Papers relevant to INIS are indexed separately

  19. 5th International and 26th All India Manufacturing Technology, Design and Research Conference

    Dixit, Uday

    2015-01-01

    This book presents selected research papers of the AIMTDR 2014 conference on application of laser technology for various manufacturing processes such as cutting, forming, welding, sintering, cladding and micro-machining. State-of-the-art of these technologies in terms of numerical modeling, experimental studies and industrial case studies are presented. This book will enrich the knowledge of budding technocrats, graduate students of mechanical and manufacturing engineering, and researchers working in this area.  

  20. International conference on innovative technologies for nuclear fuel cycles and nuclear power. Book of extended synopses

    NONE

    2003-07-01

    A wide range of issues relevant to the innovative technologies for nuclear power cycle and nuclear power were addressed. The 7 sessions of the conference were entitled: (1) no title; (2) needs, prospects and challenges for innovation; (3) evolution of technical, social, economic and political conditions; (4) panel on challenges for the deployment of innovative technologies; (5) international programmes on innovative nuclear systems; (6) innovative nuclear systems and related R and D programmes; (7) concluding panel.

  1. Precision Airdrop Technology Conference and Demonstration (4th) 2007

    2008-02-01

    items such as towplates, CDS buffer stop assemblies/center vertical restrain systems , C-17 Dual Row Airdrop System platforms, and outrigger ...specialized areas such as control systems , launcher structures , instruments, solar arrays, real-time simulation software, and parachute systems . Dutch...expertise range from advanced materials, structural composites, electronics, informatics, and portable power systems . TSI technologies are used in

  2. Coabsorbent and thermal recovery compression heat pumping technologies

    Staicovici, Mihail-Dan

    2014-01-01

    This book introduces two of the most exciting heat pumping technologies, the coabsorbent and the thermal recovery (mechanical vapor) compression, characterized by a high potential in primary energy savings and environmental protection. New cycles with potential applications of nontruncated, truncated, hybrid truncated, and multi-effect coabsorbent types are introduced in this work.   Thermal-to-work recovery compression (TWRC) is the first of two particular methods explored here, including how superheat is converted into work, which diminishes the compressor work input. In the second method, thermal-to-thermal recovery compression (TTRC), the superheat is converted into useful cooling and/or heating, and added to the cycle output effect via the coabsorbent technology. These and other methods of discharge gas superheat recovery are analyzed for single-, two-, three-, and multi-stage compression cooling and heating, ammonia and ammonia-water cycles, and the effectiveness results are given.  The author presen...

  3. Appalachian Rivers II Conference: Technology for Monitoring, Assessing, and Restoring Streams, Rivers, and Watersheds

    None available

    1999-07-29

    On July 28-29, 1999, the Federal Energy Technology Center (FETC) and the WMAC Foundation co-sponsored the Appalachian Rivers II Conference in Morgantown, West Virginia. This meeting brought together over 100 manufacturers, researchers, academicians, government agency representatives, watershed stewards, and administrators to examine technologies related to watershed assessment, monitoring, and restoration. Sessions included presentations and panel discussions concerning watershed analysis and modeling, decision-making considerations, and emerging technologies. The final session examined remediation and mitigation technologies to expedite the preservation of watershed ecosystems.

  4. Proceedings of the 4th Conference on Aerospace Materials, Processes, and Environmental Technology

    Griffin, D. E. (Editor); Stanley, D. C. (Editor)

    2001-01-01

    The next millennium challenges us to produce innovative materials, processes, manufacturing, and environmental technologies that meet low-cost aerospace transportation needs while maintaining US leadership. The pursuit of advanced aerospace materials, manufacturing processes, and environmental technologies supports the development of safer, operational, next-generation, reusable, and expendable aeronautical and space vehicle systems. The Aerospace Materials, Processes, and Environmental Technology Conference (AMPET) provided a forum for manufacturing, environmental, materials, and processes engineers, scientists, and managers to describe, review, and critically assess advances in these key technology areas.

  5. Proceedings of the international conference on advances in computer and communication technology

    Bakal, J.W.; Kunte, A.S.; Walinjkar, P.B.; Karnani, N.K.

    2012-02-01

    A nation's development is coupled with advancement and adoption of new technologies. During the past decade advancements in computer and communication technologies have grown multi fold. For the growth of any country it is necessary to keep pace with the latest innovations in technology. International Conference on Advances in Computer and Communication Technology organised by Institution of Electronics and Telecommunication Engineers, Mumbai Centre is an attempt to provide a platform for scientists, engineering students, educators and experts to share their knowledge and discuss the efforts put by them in the field of R and D. The papers relevant to INIS are indexed separately

  6. 9th Pacific Basin Nuclear Conference. Nuclear energy, science and technology - Pacific partnership. Proceedings Volume 1

    1994-04-01

    The theme of the 9th Pacific Basin Nuclear conference held in Sydney from 1-6 May 1994, embraced the use of the atom in energy production and in science and technology. The focus was on selected topics of current and ongoing interest to countries around the Pacific Basin. The two-volume proceedings include both invited and contributed papers. They have been indexed separately. This document, Volume 1 covers the following topics: Pacific partnership; perspectives on nuclear energy, science and technology in Pacific Basin countries; nuclear energy and sustainable development; economics of the power reactors; new power reactor projects; power reactor technology; advanced reactors; radioisotope and radiation technology; biomedical applications

  7. Shape Morphing Adaptive Radiator Technology (SMART) for Variable Heat Rejection

    Erickson, Lisa

    2016-01-01

    The proposed technology leverages the temperature dependent phase change of shape memory alloys (SMAs) to drive the shape of a flexible radiator panel. The opening/closing of the radiator panel, as a function of temperature, passively adapts the radiator's rate of heat rejection in response to a vehicle's needs.

  8. Safety technology for air-cooled heat exchangers

    Kawai, Masafumi; Miyamoto, Hitoshi

    2011-01-01

    The air-cooled heat exchanger is a device that enables a large amount of heat exchange (cooling) by utilizing the atmosphere as a stable and infinite heat sink. It is widely used in general industrial plants, and nowadays it is also utilized in nuclear facilities. This type of exchanger is advantageous in that it can be constructed in any location without having to be near the sea or rivers. It can be operated safely if a natural disaster, such as a tsunami or flood, occurs, thus contributing to the safety of the mother facility. IHI's air-cooled heat exchangers are designed to ensure safe operation and withstand a large earthquake or severe atmospheric conditions. This report describes the technologies used to establish these safety features and their performance. (author)

  9. Absorption technology for solar and waste heat utilization

    Grossman, G.

    1993-01-01

    Absorption heat pumps, first developed in the 19th century, have received renewed and growing attention in the past two decades. With the increasing cost of oil and electricity, the particular features of this heat-powered cycle have made it attractive for both residential and industrial applications. Solar-powered air conditioning, gas-fired domestic cooling and waste-heat-powered temperature boosters are some of the applications on which intensive research and development has been conducted. This paper describes the operation of absorption systems and discusses several practical applications. It surveys recent advances in absorption technology, including the selection of working fluids, cycle improvements and multi-staging, and fundamentals of the combined heat and mass transfer in absorption processes. (author)

  10. The joint accelerator conferences website, JACoW. An open access website for the publication of conference proceedings in accelerator science and technology

    Christine, Petit-Jean-Genaz

    2015-01-01

    The Joint Accelerator Conferences Website (JACoW), at http://www.JACoW.org came into being in the mid-nineties with the publication of the first electronic set of European Particle Accelerator Conference (EPAC) proceedings on the World Wide Web, on a server located at CERN. The publication of that first set of conference proceedings 18 years ago had developed into an international collaboration in electronic publication of accelerator science and technology conference proceedings, with at the time of writing, 18 collaborating conference series and 167 sets of proceedings published. The story of how this came about, the lessons learned along the way, are described by the author who has been part of this exciting adventure from the earliest days. This article will avoid detail of the technicalities of electronic publication, which are fully documented at the site mentioned above. It will simply tell the tale of JACoW, the people involved and their adventures. (author)

  11. PREFACE: 23rd International Conference on High Pressure Science and Technology (AIRAPT-23)

    Gupta, Satish C.

    2012-07-01

    The 23rd AIRAPT International Conference on High Pressure Science and Technology was held at Bhabha Atomic Research Centre, Mumbai, from 25-30 September 2011. This conference is part of the series of AIRAPT International Conferences which are held biennially. AIRAPT is an acronym for the French title which translates as 'International Association for the Advancement of High Pressure Science and Technology'. This was the second time the AIRAPT Conference was organized in India. The first was held 20 years ago at the National Aeronautical Laboratory, Bangalore in 1991. The 23rd Conference covered many important topics in the area of both static and dynamic high pressures including theoretical and experimental investigations on the response of materials under high pressures, new developments using neutron and synchrotron sources, investigations on superconductivity under high pressure, studies of geophysical and planetary sciences, biosciences, and the synthesis of new materials. The conference program included Bridgman award lecture, Jemieson award lecture, seven plenary talks, 85 invited talks, 83 oral presentations and about 195 posters. In all there were 372 presentations. 285 scientists from 19 countries participated in the conference. The countries represented included Austria, Canada, China, Estonia, France, Germany, India, Israel, Italy, Japan, Nepal, New Zealand, Poland, Russia, South Korea, Spain, Sweden, Switzerland, Turkey, UK, Ukraine and USA. Many new developments were presented, for example, measurement techniques using the new generation synchrotron sources, more powerful neutron sources and much brighter laser sources; integration of gas-gun with synchrotron source; the achievement of multi-megabar pressures in shock-less dynamic compressions; and capabilities to synthesize centimeter size diamonds with better quality. All these developments have opened up new opportunities for understanding the physics of materials under high pressures. I would like

  12. US Department of Energy first annual clean coal technology conference

    1992-11-01

    The first public review of the US DOE/Industry co-funded program to demonstrate the commercial readiness of Clean Coal Technologies (CCT) was held at Cleveland, Ohio Sept. 22--24, 1992. The objectives were to provide electric utilities, independent power producers, and potential foreign users information on the DOE-supported CCT projects including status, results, and technology performance potential; to further understanding of the institutional, financial, and technical considerations in applying CCTs to Clean Air Act compliance strategies; to discuss to export market, financial and institutional assistance, and the roles of government and industry in pursuing exports of CCTs; and to facilitate meetings between domestic and international attendees to maximize export opportunities

  13. 1st International Conference on Communities and Technologies

    Wenger, Etienne; Wulf, Volker

    2003-01-01

    The book contains 24 research articles related to the emerging research field of Communities and Technologies (C&T). The papers treat subjects such as online communities, communities of practice, Community support systems, Digital Cities, regional communities and the internet, knowledge sharing and communities, civil communities, communities and education and social capital. As a result of a very quality-oriented review process, the work reflects the best of current research and practice in the field of C&T.

  14. 7th international conference on Nuclear microprobe technology and applications

    2000-01-01

    This colloquium gives an up-to-date report on the continuously advancing applications and development of microbeam technology. It presents abstracts and oral contributions in the following domains: microprobes facilities, analysis techniques, imaging techniques, micro-ion beam modification of materials, microelectronics, applications in Material Sciences in Biology in Medicine in earth and planetary Sciences in environment in art in archaeology, alternative techniques. (A.L.B.)

  15. Workshop and conference on Grand Challenges applications and software technology

    1993-12-31

    On May 4--7, 1993, nine federal agencies sponsored a four-day meeting on Grand Challenge applications and software technology. The objective was to bring High-Performance Computing and Communications (HPCC) Grand Challenge applications research groups supported under the federal HPCC program together with HPCC software technologists to: discuss multidisciplinary computational science research issues and approaches, identify major technology challenges facing users and providers, and refine software technology requirements for Grand Challenge applications research. The first day and a half focused on applications. Presentations were given by speakers from universities, national laboratories, and government agencies actively involved in Grand Challenge research. Five areas of research were covered: environmental and earth sciences; computational physics; computational biology, chemistry, and materials sciences; computational fluid and plasma dynamics; and applications of artificial intelligence. The next day and a half was spent in working groups in which the applications researchers were joined by software technologists. Nine breakout sessions took place: I/0, Data, and File Systems; Parallel Programming Paradigms; Performance Characterization and Evaluation of Massively Parallel Processing Applications; Program Development Tools; Building Multidisciplinary Applications; Algorithm and Libraries I; Algorithms and Libraries II; Graphics and Visualization; and National HPCC Infrastructure.

  16. International Conference on Development and Applications of Nuclear Technologies (NUTECH-2011). Book of Abstracts

    Dudala, J.; Stegowski, Z.

    2011-01-01

    The main object of the International Conference on Development and Applications of Nuclear Technologies - NUTECH (Cracow, 11-14 September 2011) is to bring together scientists working on the development and application of nuclear technologies and to discuss further research fulfilling the needs of modern society. In the conference participate over 160 researchers from about 20 countries - among them from USA, France, Germany, Italy, Republic of South Africa, Japan, China, Brazil and South Korea . Book of Abstracts covers over 170 presentations - 13 plenary lectures, 42 section lectures and 118 posters. Thy provide information about possibilities and results of the applications of nuclear technologies in the modern economy of the 21 th century and cover the following topics: (a) nuclear energy in Poland; (b) applications of nuclear techniques; (c) nuclear energy and management of radioactive wastes; (d) radiation chemistry; (e) dosimetry and radiation protection; (f) environmental studies; (g) radiotherapy; (h) radiometric measurements; (i) radiopharmaceuticals and radioisotope production; (j) characterization of materials; (k) biomedical studies; (l) nuclear techniques in preserving cultural heritage; (m) applications of nuclear technologies in agriculture and food processing; (n) technological developments. The conference refers to 100-anniversary of the Nobel Prize in Chemistry for Maria Sklodowska-Curie. The conference is organized by Faculty of Physics and Applied Computer Science, AGH University of Science and Technology and Institute of Nuclear Chemistry and Technology. It is financially supported by Polish Energy Group Nuclear Energy S.A. (PGE, Energia Jadrowa), Polish Nuclear Society (PTN), International Atomic Energy Agency, National Atomic Agency (PAA), European Nuclear Society and Municipality of Cracow.

  17. International Conference on Development and Applications of Nuclear Technologies (NUTECH-2011). Book of Abstracts

    Dudala, J; Stegowski, Z [ed.

    2011-07-01

    The main object of the International Conference on Development and Applications of Nuclear Technologies - NUTECH (Cracow, 11-14 September 2011) is to bring together scientists working on the development and application of nuclear technologies and to discuss further research fulfilling the needs of modern society. In the conference participate over 160 researchers from about 20 countries - among them from USA, France, Germany, Italy, Republic of South Africa, Japan, China, Brazil and South Korea . Book of Abstracts covers over 170 presentations - 13 plenary lectures, 42 section lectures and 118 posters. Thy provide information about possibilities and results of the applications of nuclear technologies in the modern economy of the 21{sup th} century and cover the following topics: (a) nuclear energy in Poland; (b) applications of nuclear techniques; (c) nuclear energy and management of radioactive wastes; (d) radiation chemistry; (e) dosimetry and radiation protection; (f) environmental studies; (g) radiotherapy; (h) radiometric measurements; (i) radiopharmaceuticals and radioisotope production; (j) characterization of materials; (k) biomedical studies; (l) nuclear techniques in preserving cultural heritage; (m) applications of nuclear technologies in agriculture and food processing; (n) technological developments. The conference refers to 100-anniversary of the Nobel Prize in Chemistry for Maria Sklodowska-Curie. The conference is organized by Faculty of Physics and Applied Computer Science, AGH University of Science and Technology and Institute of Nuclear Chemistry and Technology. It is financially supported by Polish Energy Group Nuclear Energy S.A. (PGE, Energia Jadrowa), Polish Nuclear Society (PTN), International Atomic Energy Agency, National Atomic Agency (PAA), European Nuclear Society and Municipality of Cracow.

  18. 3rd ACIS International Conference on Applied Computing and Information Technology

    2016-01-01

    This edited book presents scientific results of the 3nd International Conference on Applied Computing and Information Technology (ACIT 2015) which was held on July 12-16, 2015 in Okayama, Japan. The aim of this conference was to bring together researchers and scientists, businessmen and entrepreneurs, teachers, engineers, computer users, and students to discuss the numerous fields of computer science and to share their experiences and exchange new ideas and information in a meaningful way. Research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them.

  19. 11th Biennial Conference on Emerging Mathematical Methods, Models and Algorithms for Science and Technology

    Manchanda, Pammy; Bhardwaj, Rashmi

    2015-01-01

    The present volume contains invited talks of 11th biennial conference on “Emerging Mathematical Methods, Models and Algorithms for Science and Technology”. The main message of the book is that mathematics has a great potential to analyse and understand the challenging problems of nanotechnology, biotechnology, medical science, oil industry and financial technology. The book highlights all the features and main theme discussed in the conference. All contributing authors are eminent academicians, scientists, researchers and scholars in their respective fields, hailing from around the world.

  20. 5. annual clean coal technology conference: powering the next millennium. Volume 2

    NONE

    1997-06-01

    The Fifth Annual Clean Coal Technology Conference focuses on presenting strategies and approaches that will enable clean coal technologies to resolve the competing, interrelated demands for power, economic viability, and environmental constraints associated with the use of coal in the post-2000 era. The program addresses the dynamic changes that will result from utility competition and industry restructuring, and to the evolution of markets abroad. Current projections for electricity highlight the preferential role that electric power will have in accomplishing the long-range goals of most nations. Increase demands can be met by utilizing coal in technologies that achieve environmental goals while keeping the cost- per-unit of energy competitive. Results from projects in the DOE Clean Coal Technology Demonstration Program confirm that technology is the pathway to achieving these goals. The industry/government partnership, cemented over the past 10 years, is focused on moving the clean coal technologies into the domestic and international marketplaces. The Fifth Annual Clean Coal Technology Conference provides a forum to discuss these benchmark issues and the essential role and need for these technologies in the post-2000 era. This volume contains technical papers on: advanced coal process systems; advanced industrial systems; advanced cleanup systems; and advanced power generation systems. In addition, there are poster session abstracts. Selected papers from this proceedings have been processed for inclusion in the Energy Science and Technology database.

  1. 9th FTRA International Conference on Future Information Technology

    Pan, Yi; Kim, Cheon-Shik; Yang, Yun

    2014-01-01

    The new multimedia standards (for example, MPEG-21) facilitate the seamless integration of multiple modalities into interoperable multimedia frameworks, transforming the way people work and interact with multimedia data. These key technologies and multimedia solutions interact and collaborate with each other in increasingly effective ways, contributing to the multimedia revolution and having a significant impact across a wide spectrum of consumer, business, healthcare, education, and governmental domains.  This book aims to provide a complete coverage of the areas outlined and to bring together the researchers from academic and industry as well as practitioners to share ideas, challenges, and solutions relating to the multifaceted aspects of this field.

  2. Karlsruhe international conference on analytical chemistry in nuclear technology

    1985-01-01

    This volume presents 218 abstracts of contributions by researchers working in the analytical chemistry field of nuclear technology. The majority of the papers deal with analysis with respect to process control in fuel reprocessing plants, fission and corrosion product characterization throughout the fuel cycle as well as studies of the chemical composition of radioactive wastes. Great interest is taken in the development and optimization of methods and instrumentation especially for in-line process control. About 3/4 of the papers have been entered into the data base separately. (RB)

  3. Liquid Salt Heat Exchanger Technology for VHTR Based Applications

    Anderson, Mark; Sridhara, Kumar; Allen, Todd; Peterson, Per

    2012-10-11

    The objective of this research is to evaluate performance of liquid salt fluids for use as a heat carrier for transferring high-temperature process heat from the very high-temperature reactor (VHTR) to chemical process plants. Currently, helium is being considered as the heat transfer fluid; however, the tube size requirements and the power associated with pumping helium may not be economical. Recent work on liquid salts has shown tremendous potential to transport high-temperature heat efficiently at low pressures over long distances. This project has two broad objectives: To investigate the compatibility of Incoloy 617 and coated and uncoated SiC ceramic composite with MgCl2-KCl molten salt to determine component lifetimes and aid in the design of heat exchangers and piping; and, To conduct the necessary research on the development of metallic and ceramic heat exchangers, which are needed for both the helium-to-salt side and salt-to-process side, with the goal of making these heat exchangers technologically viable. The research will consist of three separate tasks. The first task deals with material compatibility issues with liquid salt and the development of techniques for on-line measurement of corrosion products, which can be used to measure material loss in heat exchangers. Researchers will examine static corrosion of candidate materials in specific high-temperature heat transfer salt systems and develop an in situ electrochemical probe to measure metallic species concentrations dissolved in the liquid salt. The second task deals with the design of both the intermediate and process side heat exchanger systems. Researchers will optimize heat exchanger design and study issues related to corrosion, fabrication, and thermal stresses using commercial and in-house codes. The third task focuses integral testing of flowing liquid salts in a heat transfer/materials loop to determine potential issues of using the salts and to capture realistic behavior of the salts in a

  4. 2nd International Conference on Education and Educational Technology (EET 2011)

    Education and Educational Technology

    2012-01-01

    This volume includes extended and revised versions of a set of selected papers from the 2011 2nd International Conference on Education and Educational Technology (EET 2011) held in Chengdu, China, October 1-2, 2011. The mission of EET 2011 Volume 1 is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of education and educational technology to disseminate their latest research results and exchange views on the future research directions of these fields. 130 related topic papers were selected into this volume. All the papers were reviewed by 2 program committee members and selected by the volume editor Prof. Yuanzhi Wang, from Intelligent Information Technology Application Research Association, Hong Kong. The conference will bring together leading researchers, engineers and scientists in the domain of interest. We hope every participant can have a good opportunity to exchange their research ideas and results and to discuss the state of the art in th...

  5. PREFACE: 1st International Conference on Sensing for Industry, Control, Communication & Security Technologies

    Shuja Syed, Ahmed

    2013-12-01

    The 1st International Conference on Sensing for Industry, Control, Communication & Security Technologies (ICSICCST-2013), took place in Karachi, Pakistan, from 24-26 June 2013. It was organized by Indus University, Karachi, in collaboration with HEJ Research Institute of Chemistry, University of Karachi, Karachi. More than 80 abstracts were submitted to the conference and were double blind-reviewed by an international scientific committee. The topics of the Conference were: Video, Image & Voice Sensing Sensing for Industry, Environment, and Health Automation and Controls Laser Sensors and Systems Displays for Innovative Applications Emerging Technologies Unmanned, Robotic, and Layered Systems Sensing for Defense, Homeland Security, and Law Enforcement The title of the conference, 'Sensing for Industry, Control, Communication & Security Technologies' is very apt in capturing the main issues facing the industry of Pakistan and the world. We believe the sensing industry, particularly in Pakistan, is currently at a critical juncture of its development. The future of the industry will depend on how the industry players choose to respond to the challenge of global competition and opportunities arising from strong growth in the Asian region for which we are pleased to note that the conference covered a comprehensive spectrum of issues with an international perspective. This will certainly assist industry players to make informed decisions in shaping the future of the industry. The conference gathered qualified researchers from developed countries like USA, UK, Sweden, Saudi Arabia, China, South Korea and Malaysia etc whose expertise resulting from the research can be drawn upon to build an exploitable area of new technology that has potential Defense, Homeland Security, and Military applicability. More than 250 researchers/students attended the event and made the event great success as the turnout was 100%. An exceptional line-up of speakers spoke at the occasion. We want

  6. Integrating clicker technology at nursing conferences: an innovative approach to research data collection.

    Solecki, Susan; Cornelius, Frances; Draper, Judy; Fisher, Kathleen

    2010-06-01

    A pilot demonstration of integrating an audience response system, that is, 'clickers' at a nursing education conference as an engaging tool for using the research process for learning through immediate research results is presented. A convenience sample of nursing conference attendees were surveyed using clicker technology before a panel presentation on the 'Impaired Health Professional'. The 208 subjects who used the clickers were mostly women (93%) and were nurse educators (81%) with at least 20 years of nursing experience (75%). The ease of data collection, real-time analysis, the active engagement of both participant and presenter were all findings of this study. The utility of this tool as a stimulus for discussion and learning was also reported. Pilot testing the clicker at an education conference for data collection and educational purposes was an important goal and positive outcome of this study. Researchers and educators are advised on the planning steps required to make this a successful experience.

  7. 2014 International Conference on Simulation and Modeling Methodologies, Technologies and Applications

    Ören, Tuncer; Kacprzyk, Janusz; Filipe, Joaquim

    2015-01-01

    The present book includes a set of selected extended papers from the 4th International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2014), held in Vienna, Austria, from 28 to 30 August 2014. The conference brought together researchers, engineers and practitioners interested in methodologies and applications of modeling and simulation. New and innovative solutions are reported in this book. SIMULTECH 2014 received 167 submissions, from 45 countries, in all continents. After a double blind paper review performed by the Program Committee, 23% were accepted as full papers and thus selected for oral presentation. Additional papers were accepted as short papers and posters. A further selection was made after the Conference, based also on the assessment of presentation quality and audience interest, so that this book includes the extended and revised versions of the very best papers of SIMULTECH 2014. Commitment to high quality standards is a major concern of SIMULTEC...

  8. 5th International Conference on Simulation and Modeling Methodologies, Technologies and Applications

    Kacprzyk, Janusz; Ören, Tuncer; Filipe, Joaquim

    2016-01-01

    The present book includes a set of selected extended papers from the 5th International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2015), held in Colmar, France, from 21 to 23 July 2015. The conference brought together researchers, engineers and practitioners interested in methodologies and applications of modeling and simulation. New and innovative solutions are reported in this book. SIMULTECH 2015 received 102 submissions, from 36 countries, in all continents. After a double blind paper review performed by the Program Committee, 19% were accepted as full papers and thus selected for oral presentation. Additional papers were accepted as short papers and posters. A further selection was made after the Conference, based also on the assessment of presentation quality and audience interest, so that this book includes the extended and revised versions of the very best papers of SIMULTECH 2015. Commitment to high quality standards is a major concern of SIMULTECH t...

  9. Conference

    Association du personnel

    2013-01-01

    A new integrated model for dementia management A Greek interdisciplinary scientific group proposes new technologies, novel neuroscientific concepts and advanced socio-economic and administrational organisation to ease the management of dementia in elderly Dr. Kostas Petsanis Thursday 23 May from 6.30 p.m. to 8.00 p.m. Council Chamber The general economic crisis while being a nightmare for the society, it has also given way to a new kind of reorganization and living. Elderly people come up against many health problems. A society of elders needs flexible solutions in every day living in order to avoid social and health stalemates. The mood and cognition in the elderly turn out to be doubtful and problematic. These situations give rise to a continuously growing number of depressed and demented elderly people with catastrophic results to the quality of life and social management. Αn interdisciplinary group of greek scientists proposes a novel advanced process of ambient interaction for elderly peo...

  10. Overview of bladder heating technology: matching capabilities with clinical requirements

    Stauffer, Paul R.; van Rhoon, Gerard C.

    2016-01-01

    Moderate temperature hyperthermia (40–450°C for one hour) is emerging as an effective treatment to enhance best available chemotherapy strategies for bladder cancer. A rapidly increasing number of clinical trials have investigated the feasibility and efficacy of treating bladder cancer with combined intravesical chemotherapy and moderate temperature hyperthermia. To date, most studies have concerned treatment of non-muscle invasive bladder cancer (NMIBC) limited to the interior wall of the bladder. Following the promising results of initial clinical trials, investigators are now considering protocols for treatment of muscle invasive bladder cancer (MIBC). This paper provides a brief overview of the devices and techniques used for heating bladder cancer. Systems are described for thermal conduction heating of bladder wall via circulation of hot fluid, intravesical microwave antenna heating, capacitively coupled RF current heating, and radiofrequency phased array deep regional heating of the pelvis. Relative heating characteristics of the available technologies are compared based on published feasibility studies, and the systems correlated with clinical requirements for effective treatment of MIBC and NMIBC. PMID:26939993

  11. 8th KES International Conference on Intelligent Decision Technologies

    Caballero, Alfonso; Howlett, Robert; Jain, Lakhmi

    2016-01-01

    The KES-IDT-2016 proceedings give an excellent insight into recent research, both theoretical and applied, in the field of intelligent decision making. The range of topics explored is wide, and covers methods of grouping, classification, prediction, decision support, modelling and many more in such areas as finance, linguistics, medicine, management and transportation. This proceedings contain several sections devoted to specific topics, such as: · Specialized Decision Techniques for Data Mining, Transportation and Project Management · Pattern Recognition for Decision Making Systems · New Advances of Soft Computing in Industrial and Management Engineering · Recent Advances in Fuzzy Systems · Intelligent Data Analysis and Applications · Reasoning-based Intelligent Systems · Intelligent Methods for Eye Movement Data Processing and Analysis · Intelligent Decision Technologies for Water Resources Management · Intelligent Decision Making for Uncertain Unstructured Big Data · Decision Making Theory for Ec...

  12. 2013 International Conference on Electrical and Information Technologies for Rail Transportation

    Liu, Zhigang; Qin, Yong; Zhao, Minghua; Diao, Lijun

    2014-01-01

    Proceedings of the 2013 International Conference on Electrical and Information Technologies for Rail Transportation (EITRT2013) collects the latest research in this field, including a wealth of state-of-the-art research theories and applications in intelligent computing, information processing, communication technology, automatic control, etc. The objective of the proceedings is to provide a major interdisciplinary forum for researchers, engineers, academics and industrial professionals to present the most innovative research on and developments in the field of rail transportation electrical and information technologies. Contributing authors from academia, industry and the government also offer inside views of new, interdisciplinary solutions.

  13. Heat savings and heat generation technologies: Modelling of residential investment behaviour with local health costs

    Zvingilaite, Erika; Klinge Jacobsen, Henrik

    2015-01-01

    The trade-off between investing in energy savings and investing in individual heating technologies with high investment and low variable costs in single family houses is modelled for a number of building and consumer categories in Denmark. For each group the private economic cost of providing hea...... for private consumers decrease by 66% when all have the option to shift to the technology with lowest variable costs. © 2014 Elsevier Ltd. All Rights reserved......The trade-off between investing in energy savings and investing in individual heating technologies with high investment and low variable costs in single family houses is modelled for a number of building and consumer categories in Denmark. For each group the private economic cost of providing...

  14. 2006 annual nuclear technology conference on energy policy

    Westerwelle, G.

    2006-01-01

    Liberals have clear ideas about the relations between the economy and the environment. Good ecology is also long-term economy, and there is no contradiction between the economy and the environment. New technologies, more investments into research, cooperation with industry and the public are required to bring about a new environmental policy in Germany. Energy policy needs a new beginning free from ideology. This is elaborated in 7 theses: - The key to successful economic development, more growth and employment is to be found in sustainable energy supply. - The 3 guiding principles of sustainable energy supply are (1) economic soundness, (2) continuity of supply, (3) environmental compatibility. - The supply situation is the more secure, the richer the energy mix, and the more sources from all over the world are used. - Taxes, levies, and costs due to shifting are a burden on energy prices and endanger the economic viability of energy supply. - We need a sensible energy mix composed of fossil energy resources, nuclear power, and renewable energies. - A rich energy mix combined with a powerful expansion of renewables, more measures to improve efficiency and save energy make Germany less dependent on international raw material purchases. - Climate change is a reality. Enhancing research and development efforts is our response. (orig.)

  15. Heat stress monitoring system. Innovative technology summary report

    1998-11-01

    The US Department of Energy's (DOE) nuclear facility decontamination and decommissioning (D and D) program involves the need to decontaminate and decommission buildings expeditiously and cost-effectively. Simultaneously, the health and safety of personnel involved in the D and D activities is of primary concern. Often, D and D workers must perform duties in inclement weather, and because they also frequently work in contaminated areas, they must wear personal protective clothing and/or respirators. Monitoring the health status of workers under these conditions is an important component of ensuring their safety. The MiniMitter VitalSense Telemetry System's heat stress monitoring system (HSMS) is designed to monitor the vital signs of individual workers as they perform work in conditions that might be conducive to heat exhaustion or heat stress. The HSMS provides real-time data on the physiological condition of workers which can be monitored to prevent heat stress or other adverse health situations. This system is particularly useful when workers are wearing personal protective clothing or respirators that make visual observation of their condition more difficult. The MiniMitter VitalSense Telemetry System can monitor up to four channels (e.g., heart rate, body activity, ear canal, and skin temperature) and ten workers from a single supervisory station. The monitors are interfaced with a portable computer that updates and records information on individual workers. This innovative technology, even though it costs more, is an attractive alternative to the traditional (baseline) technology, which measures environmental statistics and predicts the average worker's reaction to those environmental conditions without taking the physical condition of the individual worker into consideration. Although use of the improved technology might be justified purely on the basis of improved safety, it has the potential to pay for itself by reducing worker time lost caused by heat

  16. 2009 annual conference on nuclear technology opening address

    Hohlefelder, Walter

    2009-01-01

    To Germany, 2009 first and foremost is an election year. The course will be reset. At any rate, reassessing nuclear power policy in Germany in the sense of plant life extension and real progress in solving the energy problem is indispensable. One major reason is the change in boundary conditions since 2000, the year of the agreement between the Red-Green federal government and the nuclear power plant licensees. Climate change, security of power supply, and overcoming the worldwide financial and economic crisis are important points to be mentioned. The world of nuclear power, too, has changed. Besides Finland, also Switzerland, the United Kingdom, Sweden, Italy, and Poland are European countries intending to build new nuclear power plants. Premature shutdown of 7 out of the 17 German nuclear power plants in the next legislative term of the German federal parliament would have grave consequences for the security of supply and would greatly jeopardize the objectives of climate protection. In addition, it would weaken Germany's position as a center of industry. It is important, therefore, to negotiate a sensible approach after the national elections. Like the politically motivated alliance of coal and nuclear in the 1970s and 1980s, a model encompassing renewables, efforts towards energy efficiency, and nuclear power could be possible. As nuclear power has lost its divisive effect on society, despite ongoing discussions, the necessary reassessment must be put on the agenda also in Germany. One major issue is real progress in the waste management problem. This dialog will have to be carried on in a committed as well as unbiased way particularly in the weeks and months to come. We need all power technologies, nuclear included. (orig.)

  17. Sustainable development through nuclear technology : 29th annual conference of the Canadian Nuclear Society and 32nd CNS/CNA student conference

    2008-01-01

    The 29th Annual Conference of the Canadian Nuclear Society and 32nd CNS/CNA Student Conference on Sustainable Development through Nuclear Technology was held on June 1-4, 2008 in Toronto, Ontario, Canada. The theme of the conference was 'Nuclear Sustainability'. The central objective of this conference was to provide a forum for exchange of views on how this technical enterprise can best serve the needs of humanity, now and in the future. The renewed global interest in nuclear technology is based on a recognition of its potential to meet economic and environmental targets more favourably than competing technologies. Although many of these attractions are short-term in nature, they stem from a broader potential of nuclear technology to drive all aspects of development (social, environmental, economic) in a sustainable in this area. (author) a terial in support of fuel resources themselves. The conference drew a record attendance of over 450 delegates. Over 100 technical papers were presented within 15 technical sessions, as well as over 30 student papers in 5 sessions. The following list of session titles indicates the diversity of the technical papers: advanced reactors; plant and components; process systems; thermalhydraulics; safety and licensing; hydrogen; human factors; physics; instrumentation and control; environment and waste management; and plant operation. (author)

  18. Status of high-temperature heat-pipe technology

    Ranken, W.A.

    1982-01-01

    This paper discusses the application of heat pipes to nuclear reactor space power systems. Characteristics of the device that favor such an application are described and recent results of current technology development programs are presented. Research areas that will need to be addressed in demonstrating that adequate lifetimes can be achieved with evaporation/condensation cycles operating at high temperatures in a reactor environment are also discussed

  19. Transforming global health with mobile technologies and social enterprises: global health and innovation conference.

    Kayingo, Gerald

    2012-09-01

    More than 2,000 people convened for the ninth annual Global Health and Innovation Conference at Yale University on April 21-22, 2012. Participants discussed the latest innovations, ideas in development, lessons learned, opportunities and challenges in global health activities. Several themes emerged, including the important role of frontline workers, strengthening health systems, leveraging social media, and sustainable and impact-driven philanthropy. Overall, the major outcome of the conference was the increased awareness of the potential of mobile technologies and social enterprises in transforming global health. Experts warned that donations and technological advances alone will not transform global health unless there are strong functioning health infrastructures and improved workforce. It was noted that there is a critical need for an integrated systems approach to global health problems and a need for scaling up promising pilot projects. Lack of funding, accountability, and sustainability were identified as major challenges in global health.

  20. 7th International Conference in Methodologies and Intelligent Systems for Technology Enhanced Learning

    Gennari, Rosella; Mascio, Tania; Rodríguez, Sara; Prieta, Fernando; Ramos, Carlos; Silveira, Ricardo

    2017-01-01

    This book presents the outcomes of the 7th International Conference in Methodologies and Intelligent Systems for Technology Enhanced Learning (MIS4TEL'17), hosted by the Polytechnic of Porto, Portugal from 21 to 23 June 2017. Expanding on the topics of the previous conferences, it provided an open forum for discussing intelligent systems for technology enhanced learning (TEL) and their roots in novel learning theories, empirical methodologies for their design or evaluation, stand-alone and web-based solutions, and makerspaces. It also fostered entrepreneurship and business startup ideas, bringing together researchers and developers from industry, education and the academic world to report on the latest scientific research, technical advances and methodologies.

  1. 2nd International Conference on Education and Educational Technology (EET 2011)

    Education Management, Education Theory and Education Application

    2012-01-01

    This volume includes extended and revised versions of a set of selected papers from the 2011 2nd International Conference on Education and Educational Technology (EET 2011) held in Chengdu, China, October 1-2, 2011. The mission of EET 2011 Volume 2 is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of education management, education theory and education application to disseminate their latest research results and exchange views on the future research directions of these fields. 133 related topic papers were selected into this volume. All the papers were reviewed by 2 program committee members and selected by the volume editor Prof. Yuanzhi Wang, from Intelligent Information Technology Application Research Association, Hong Kong. The conference will bring together leading researchers, engineers and scientists in the domain of interest. We hope every participant can have a good opportunity to exchange their research ideas and results and to discus...

  2. International Conference on Modern Mathematical Methods and High Performance Computing in Science and Technology

    Srivastava, HM; Venturino, Ezio; Resch, Michael; Gupta, Vijay

    2016-01-01

    The book discusses important results in modern mathematical models and high performance computing, such as applied operations research, simulation of operations, statistical modeling and applications, invisibility regions and regular meta-materials, unmanned vehicles, modern radar techniques/SAR imaging, satellite remote sensing, coding, and robotic systems. Furthermore, it is valuable as a reference work and as a basis for further study and research. All contributing authors are respected academicians, scientists and researchers from around the globe. All the papers were presented at the international conference on Modern Mathematical Methods and High Performance Computing in Science & Technology (M3HPCST 2015), held at Raj Kumar Goel Institute of Technology, Ghaziabad, India, from 27–29 December 2015, and peer-reviewed by international experts. The conference provided an exceptional platform for leading researchers, academicians, developers, engineers and technocrats from a broad range of disciplines ...

  3. Proceedings of the first MIT international conference on the next generation of nuclear power technology

    NONE

    1990-07-01

    The overall goal of advanced nuclear reactor development is to provide technological options which will be broadly acceptable to the different interested communities - electric utilities, environmental protection interests and electricity consumers. These constituencies will differ greatly in their priorities and understandings of what is feasible. However they all will collectively determine the definition of what constitutes an acceptable technology. The purpose of the Conference reported here was to aid the process reaching a greater consensus concerning acceptable technologies. The Conference was structured to permit all of those involved to gain a common understanding of the performance attributes which can reasonably be expected from the next generation of nuclear power plants, and to assist the process of communication among the various interest groups - ranging from reactor manufacturers and electric utilities to groups which have been strongly critical of nuclear power. This Conference is the first of an indefinite series of Conferences to be sponsored by the Program. The purpose of having a series of Conferences is to permit them to serve as a vehicle for sustained discussion among the communities which will determine whether future nuclear power plants are acceptable as national strategic options. The hope in organizing these Conferences is to improve the technologies which will eventually emerge, as a consequence of early effective communication among those concerned with the results. In order to do this, however, it is necessary for the people involved in such communication to have opportunities for sustained exposure to the ideas of others whom they would not otherwise have met. To do this it is necessary that these various communities interact repeatedly. The Conference series is intended to assist in that process. The Conference consisted of six focused topical sessions and two panel discussions. In each topical session keynote and respondent papers

  4. Proceedings of the first MIT international conference on the next generation of nuclear power technology

    1990-01-01

    The overall goal of advanced nuclear reactor development is to provide technological options which will be broadly acceptable to the different interested communities - electric utilities, environmental protection interests and electricity consumers. These constituencies will differ greatly in their priorities and understandings of what is feasible. However they all will collectively determine the definition of what constitutes an acceptable technology. The purpose of the Conference reported here was to aid the process reaching a greater consensus concerning acceptable technologies. The Conference was structured to permit all of those involved to gain a common understanding of the performance attributes which can reasonably be expected from the next generation of nuclear power plants, and to assist the process of communication among the various interest groups - ranging from reactor manufacturers and electric utilities to groups which have been strongly critical of nuclear power. This Conference is the first of an indefinite series of Conferences to be sponsored by the Program. The purpose of having a series of Conferences is to permit them to serve as a vehicle for sustained discussion among the communities which will determine whether future nuclear power plants are acceptable as national strategic options. The hope in organizing these Conferences is to improve the technologies which will eventually emerge, as a consequence of early effective communication among those concerned with the results. In order to do this, however, it is necessary for the people involved in such communication to have opportunities for sustained exposure to the ideas of others whom they would not otherwise have met. To do this it is necessary that these various communities interact repeatedly. The Conference series is intended to assist in that process. The Conference consisted of six focused topical sessions and two panel discussions. In each topical session keynote and respondent papers

  5. Conference on heat mass transfer and properties of liquid metals TF-2002

    Efanov, A.D.; Kozlov, F.A.

    2003-01-01

    Results of the conference TF-2002 devoted to the combined approach to problems of harnessing liquid metals as coolants for NPU are presented. The conference takes place in Obninsk, 29 - 31 October, 2002. Papers of the conference involve items on thermal hydraulics, mass transfer and safety of NPU with liquid metal coolants, structure, physical and chemical properties of liquid metal and liquid metal solutions, decommissioning of units and ecology, application of liquid metals divorced with NPU. Most of the papers of the conference are devoted to the investigation into lead and lead-bismuth coolants [ru

  6. Advances in high pressure science and technology: proceedings of the fourth national conference on high pressure science and technology

    Yousuf, Mohammad; Subramanian, N.; Govinda Rajan, K.

    1997-09-01

    The proceedings of the fourth National Conference on High Pressure Science and Technology covers a wide area of research and development activities in the field of high pressure science and technology, broadly classified into the following themes: mechanical behaviour of materials; instrumentation and methods in high pressure research; pressure calibration, standards and safety aspects; phase transitions; shock induced reactions; mineral science, geophysics, geochemistry and planetary sciences; optical, electronic and transport properties; synthesis of materials; soft condensed matter physics and liquid crystals; computational methods in high pressure research. Papers relevant to INIS are indexed separately

  7. 8th International Conference on Computer Science and its Applications (CSA-16) and the 11st International Conference on Ubiquitous Information Technologies and Applications (CUTE 2016)

    Pan, Yi; Yi, Gangman; Loia, Vincenzo

    2017-01-01

    This book presents the combined proceedings of the 8th International Conference on Computer Science and its Applications (CSA-16) and the 11st International Conference on Ubiquitous Information Technologies and Applications (CUTE 2016), both held in Bangkok, Thailand, December 19 - 21, 2016. The aim of these two meetings was to promote discussion and interaction among academics, researchers and professionals in the field of ubiquitous computing technologies. These proceedings reflect the state-of-the-art in the development of computational methods, involving theory, algorithm, numerical simulation, error and uncertainty analysis and novel application of new processing techniques in engineering, science, and other disciplines related to ubiquitous computing.

  8. New technologies and alternative feedstocks in petrochemistry and refining. Preprints of the conference

    Ernst, S.; Jess, A.; Lercher, J.A.; Lichtscheidl, J.; Marchionna, M. (eds.)

    2013-11-01

    This international conference paper provides a forum for chemists and engineers from refinery, petrochemistry and the chemical industry as well as from academia to discuss new technologies and alternative feedstocks in petrochemistry and refining with the special topic ''Shale Gas, Heavy Oils and Coal''. 23 Lectures and 18 Posters are presented. All papers are analyzed for the ENERGY database.

  9. Actual problems of physics and technology. III International youth scientific school-conference. Book of abstracts

    2014-01-01

    The third International youth scientific school-conference took place 10-13 April 2014 year in Moscow on the basis National Research Nuclear University MEPhI and RAS Lebedev P.N. Physical Institute. The actual scientific problems of current fundamental and applied physics as well as nuclear and physical technologies were discussed. This book of abstracts contains many interesting items devoted problems of theoretical physics and astrophysics, nuclear physics, nanotecnology, laser physics and plasma physics [ru

  10. Report of a Planning Conference for Solar Technology Information Transfer in Georgia (Atlanta, Georgia, July 24-25, 1978).

    Aldridge, Mark C., Ed.

    A summary of the deliberations of the Georgia planning conference of the Solar Technology Transfer Program is presented in this report. Topic areas include background information on the Georgia conference and a summary of the discussions and recommendations dealing with solar information transfer within state systems and the need for greater…

  11. The DuPont Conference: Implications for the Chemical Technology Curriculum

    Kenkel, John; Rutledge, Sue; Kelter, Paul B.

    1998-05-01

    Southeast Community College (SCC) hosted the first DuPont Conference for Chemical Technology Education at its Lincoln, Nebraska campus October 4-6, 1997. The conference brought together fourteen practicing chemists and chemistry technicians and five college and university faculty members for the express purpose of suggesting new laboratory activities that would help relate the real world of work to the education of chemical laboratory technicians in community colleges. Participants included seven men and seven women from DuPont, Procter & Gamble, Eastman Chemical, Eastman Kodak, Dow Chemical, Air Products and Chemicals, Monsanto, Union Carbide, the Nebraska Agriculture Laboratory, and the University of Nebraska Biological Process Development Facility, Department of Food Science. The conference, sponsored by the E. I. DuPont DeNemours & Company through a grant awarded to SCC in June 1997, was intended to help further the goals of the two major projects underway at SCC, funded by the National Science Foundation's Advanced Technological Education Program. These projects, dubbed "Assignment: Chemical Technology I and II", or ACT-I and ACT-II, are curriculum and materials development projects. The invited scientists had between 2 and 32 years of experience that ranged from bench work to management levels. Many are or have been active on the national scene as members and officers of the American Chemical Society's Division of Chemical Technicians and the ACS Committee on Technician Activities.

  12. Discussion on application of water source heat pump technology to uranium mines

    An Qiang

    2011-01-01

    Application of water source heat pump units in recovering waste heat from uranium mines is discussed, and several forms of waste heat recovery are introduced. The problems in the application of water source heat pump technology are analyzed. Analysis results show that the water source heat pump technology has broad application prospects in uranium mines, and it is a way to exchange existing structure of heat and cold sources in uranium mines. (authors)

  13. Call for Nominations The Nusselt Reynolds Prize Sponsored by Assembly of World Conferences on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics

    Kasagi, Nobuhide

    2000-01-01

    The Nusselt Reynolds Prize has been established by the Assembly of World Conferences to commemorate outstanding contributions by Wilhelm Nusselt and Osborne Reynolds as experimentalists, researchers, educators, and authors. As many as three prizes may be bestowed at every World Conference, one in each of the areas of heat transfer, fluid mechanics, thermodynamics, or any combination of these.

  14. ic-cmtp3: 3rd International Conference on Competitive Materials and Technology Processes

    2016-04-01

    Competitiveness is one of the most important factors in our lives and it plays a key role in the efficiency both of organizations and societies. The more scientifically advanced and prepared organizations develop more competitive materials with better physical, chemical, and biological properties, and the leading companies apply more competitive equipment and technological processes. The aims of the 3rd International Conference on Competitive Materials and Technology Processes (ic-cmtp3), and the 1st International Symposium on Innovative Carbons and Carbon Based Materials (is-icbm1) and the 1st International Symposium on Innovative Construction Materials (is-icm1) organized alongside are the following: —Promote new methods and results of scientific research in the fields of material, biological, environmental and technological sciences; —Exchange information between the theoretical and applied sciences as well as technical and technological implementations; —Promote communication and collaboration between the scientists, researchers and engineers of different nations, countries and continents. Among the major fields of interest are advanced and innovative materials with competitive characteristics, including mechanical, physical, chemical, biological, medical and thermal, properties and extreme dynamic strength. Their crystalline, nano - and micro-structures, phase transformations as well as details of their technological processes, tests and measurements are also in the focus of the ic-cmtp3 conference and the is-scbm1 and is-icm1 symposia. Multidisciplinary applications of material science and the technological problems encountered in sectors like ceramics, glasses, thin films, aerospace, automotive and marine industries, electronics, energy, construction materials, medicine, biosciences and environmental sciences are of particular interest. In accordance with the program of the ic-cmtp3 conference and is-icbm1 and is-icm1 symposia we have received more

  15. Conference Paper NFO-7:7th International Conference on Near-Field Optics and Related Technologies

    Novotny, Lukas [Univ. of Rochester, NY (United States)

    2004-10-18

    The seventh conference in the NFO conference series, held here in Rochester, provided to be the principal forum for advances in sub-wavelength optics, near-field optical microscopy, local field enhancement, instrumental developments and the ever-increasing range of applications. This conference brought together the diverse scientific communities working on the theory and application of near-field optics (NFO) and related techniques.

  16. 5. annual clean coal technology conference: powering the next millennium. Vol.1

    NONE

    1997-07-01

    The Fifth Annual Clean Coal Technology Conference focuses on presenting strategies and approaches that will enable clean coal technologies to resolve the competing, interrelated demands for power, economic viability, and environmental constraints associated with the use of coal in the post-2000 era. The program addresses the dynamic changes that will result from utility competition and industry restructuring, and to the evolution of markets abroad. Current projections for electricity highlight the preferential role that electric power will have in accomplishing the long-range goals of most nations. Increased demands can be met by utilizing coal in technologies that achieve environmental goals while keeping the cost- per-unit of energy competitive. Results from projects in the DOE Clean Coal technology Demonstration Program confirm that technology is the pathway to achieving these goals. The industry/government partnership, cemented over the past 10 years, is focused on moving the clean coal technologies into the domestic and international marketplaces. The Fifth Annual Clean Coal Technology Conference provides a forum to discuss these benchmark issues and the essential role and need for these technologies in the post-2000 era. This volume contains papers presented at the plenary session and panel sessions on; international markets for clean coal technologies (CCTs); role of CCTs in the evolving domestic electricity market; environmental issues affecting CCT deployment; and CCT deployment from today into the next millennium. In addition papers presented at the closing plenary session on powering the next millennium--CCT answers the challenge are included. Selected papers have been processed for inclusion in the Energy Science and Technology database.

  17. PREFACE: 2nd International Conference on Competitive Materials and Technological Processes (IC-CMTP2)

    László, Gömze A.

    2013-12-01

    Competitiveness is one of the most important factors in our life and it plays a key role in the efficiency both of organizations and societies. The more scientifically supported and prepared organizations develop more competitive materials with better physical, chemical and biological properties and the leading companies apply more competitive equipment and technology processes. The aims of the 2nd International Conference on Competitive Materials and Technology Processes (ic-cmtp2) are the following: Promote new methods and results of scientific research in the fields of material, biological, environmental and technology sciences; Change information between the theoretical and applied sciences as well as technical and technological implantations. Promote the communication between the scientist of different nations, countries and continents. Among the major fields of interest are materials with extreme physical, chemical, biological, medical, thermal, mechanical properties and dynamic strength; including their crystalline and nano-structures, phase transformations as well as methods of their technological processes, tests and measurements. Multidisciplinary applications of materials science and technological problems encountered in sectors like ceramics, glasses, thin films, aerospace, automotive and marine industry, electronics, energy, construction materials, medicine, biosciences and environmental sciences are of particular interest. In accordance to the program of the conference ic-cmtp2, more than 250 inquiries and registrations from different organizations were received. Researchers from 36 countries in Asia, Europe, Africa, North and South America arrived at the venue of conference. Including co-authors, the research work of more than 500 scientists are presented in this volume. Professor Dr Gömze A László Chair, ic-cmtp2 The PDF also contains lists of the boards, session chairs and sponsors.

  18. Technological issues of ion cyclotron heating of fusion plasmas

    Hwang, D.Q.; Fortgang, C.M.

    1985-01-01

    With the recent promising results of plasma heating using electromagnetic waves (EM waves) in the ion cyclotron range of frequency (ICRF) on the Princeton Large Torus (PLT) tokamak the feasibility of employing ICRF heating to a reactor-like magnetic confinement device is increasing. The high power ICRF experiments funded on JET (Joint European Torus in England) and JT-60 (in Japan) will have rf source power in the range of 10-30 MW. The time scale for the duration of the RF pulse will range from seconds up to steady-state. The development of new RF components that can transmit and launch such high power, long pulse length, EM waves in a plasma environment is a major technological task. In general, the technology issues may be divided into two categories. The first category concerns the region where the plasma comes in contact with the wave launchers. The problems here are dominated by plasmamaterial interaction, heat deposition by the plasma onto the wave launcher, and erosion of the launcher material. It is necessary to minimize the heat deposition from the plasma, the losses of the RF wave energy in the structure, and to prevent sputtering of the antenna components. A solution involves a combined design using special materials and optimal shaping of the Faraday shield (the electrostatic shields which can be used both for an EM wave polarization adjustment and as a particle shield for the launcher). Recent studies by PPPL and McDonnell Douglas Corp. on the Faraday shield designs will be discussed. The second important area where technology development will be necessary is the transmission of high power RF waves through a gas/vacuum interface region. In the past, the vacuum feedthrough has been the bottle neck which prevented high power operation of the PLT antenna

  19. Heat transfer 1982. Proceedings of the Seventh International Conference, Technische Universitaet, Muenchen, Munich, West Germany, September 6-10, 1982. Volume 1 - Review and keynote papers

    Grigull, U.; Straub, J.

    1982-01-01

    Aspects of heat transfer are addressed. The topics considered include: heat transfer in turbulent flows, boiling mixtures, the atmosphere, rheological systems, and combustion chambers; numerical methods and visualization of heat transfer; radiative, particle, and cryogenic heat transfer; flow boiling, heat exchanger technology and prediction of transport properties related to heat transfer. Also discussed are: advanced boundary-layer theory in heat transfer, enhancement of heat transfer, nuclear safety heat transfer, free convection, influence of fouling on heat transfer, heat and mass transfer to rivers, and buoyancy effect on heat transfer in forced channel flows

  20. 7th Annual Science and Engineering Technology Conference/DoD Technology Exposition Volume 1

    2006-04-20

    Disruptive Technologies • Army Approach to Disruptive Technologies and Transition Mr. Dennis Schmidt, Director, Science & Technology Integration, Office of...the Assistant Secretary of the Army for Research and Technology • Navy Approach to Disruptive Technologies and Transition Mr. Lewis DeSandre, Program...Manager, ONR 351 • Air Force Approach to Disruptive Technologies and Transition Colonel Mark Stephen, Associate Deputy Assistant Secretary (Science

  1. Annual Science and Engineering Technology Conference/DOD Technology Exposition (7th). Volume 2. Wednesday - Thursday

    2006-04-20

    Disruptive Technologies • Army Approach to Disruptive Technologies and Transition Mr. Dennis Schmidt, Director, Science & Technology Integration, Office of...the Assistant Secretary of the Army for Research and Technology • Navy Approach to Disruptive Technologies and Transition Mr. Lewis DeSandre, Program...Manager, ONR 351 • Air Force Approach to Disruptive Technologies and Transition Colonel Mark Stephen, Associate Deputy Assistant Secretary (Science

  2. Third International Conference on Computational Science, Engineering and Information Technology (CCSEIT-2013), v.1

    Kumar, Ashok; Annamalai, Annamalai

    2013-01-01

      This book is the proceedings of Third International Conference on Computational Science, Engineering and Information Technology (CCSEIT-2013) that was held in Konya, Turkey, on June 7-9. CCSEIT-2013 provided an excellent international forum for sharing knowledge and results in theory, methodology and applications of computational science, engineering and information technology. This book contains research results, projects, survey work and industrial experiences representing significant advances in the field. The different contributions collected in this book cover five main areas: algorithms, data structures and applications;  wireless and mobile networks; computer networks and communications; natural language processing and information theory; cryptography and information security.  

  3. Proceedings of the national conference on critical and strategic materials for advanced technologies

    2017-01-01

    The conference is totally devoted to all aspects of critical and strategic materials. The overall objectives of the symposium are to discuss: a) the key and enabling role of critical and strategic materials in advanced technologies; b) a sustainable supply and utilization of these materials; c) to bring into focus cross-cutting research and educational needs and scientific/technological grand challenges associated with the sustainable extraction, recovery, recycling, reuse, substitution and purification of critical materials and d) to communicate the research needs in this field to the scientists, technologists and government. Papers relevant to INIS are indexed separately

  4. Technologies for waste heat recovery in off-shore applications

    Pierobon, Leonardo; Haglind, Fredrik; Kandepu, Rambabu

    2013-01-01

    different technologies are presented, considering the Draugen platform in the North Sea as a base case. The Turboden 65-HRS unit is considered as representative of the organic Rankine cycle technology. Air bottoming cycles are analyzed and optimal design pressure ratios are selected. We also study a one...... pressure level steam Rankine cycle employing the once-through heat recovery steam generator without bypass stack. We compare the three technologies considering the combined cycle thermal efficiency, the weight, the net present value, the profitability index and payback time. Both incomes related to CO2...... of the unit is expected to be around 250 ton. The air bottoming cycle without intercooling is also a possible alternative due to its low weight (76 ton) and low investment cost (8.8 M$). However, cycle performance and profitability index are poorer, 12.1% and 0.75. Furthermore, the results suggest...

  5. Proceedings of the oil sands and heavy oil technologies conference and exhibition

    2009-01-01

    This conference provided a forum for oil sands industry leaders to review the current and future state of technology in this frontier environment. Presentations were delivered by key personnel involved in groundbreaking projects with a renewed focus on oil sands technology and equipment, viewed from the strategic level with case studies and reports on application technologies designed to optimize oil sands operations. The presentations addressed a wide range of issues related to the environmental impacts of oil sands processing facilities, including innovative water and wastewater solutions for heavy oil producers for bitumen mining, in-situ and upgrading facilities. New advances in sulphur treatment technologies were highlighted along with technologies designed to increase the energy efficiency and energy consumption rates of upgrader and processing facilities. Advances in carbon dioxide (CO 2 ) capture and storage systems were also discussed along with geopolitical and economic evaluations of the future of the oil sands industry. The conference featured 59 presentations, of which 48 have been catalogued separately for inclusion in this database. refs., tabs., figs

  6. NIH-IEEE 2015 Strategic Conference on Healthcare Innovations and Point-of-Care Technologies for Prec

    NIH and the Institute for Electrical and Electronics Engineering, Engineering in Medicine and Biology Society (IEEE/EMBS) hosted the third iteration of the Healthcare Innovations and Point-of-Care Technologies Conference last week.

  7. Energetical and ecological assessment of solar- and heat pump technologies for hot water preparation and space heating in Austria

    Faninger, G.

    1991-11-01

    Solar and heat pump systems have been proved in many applications on the market. To achieve an efficient energy output it is necessary to consider the special conditions of these technologies. The energetical and ecological criteria of solar and heat pump systems for hot water preparation and space heating are analysed on the basis of experimental data. (author)

  8. Europe, Middle East and North Africa Conference on Technology and Security to Support Learning 2016

    Serrhini, Mohammed; Felgueiras, Carlos

    2017-01-01

    This book contains a selection of articles from The Europe, Middle East and North Africa Conference on Technology and Security to Support Learning 2016 (EMENA-TSSL'16), held between the 3th and 5th of October at Saidia, Oujda, Morocco. EMENA-TSSL'16 is a global forum for researchers and practitioners to present and discuss recent results and innovations, current trends, professional experiences and challenges in Information & Communication Technologies, and Security to support Learning. The main topics covered are: A) Online Education; B) Emerging Technologies in Education; C) Artificial Intelligence in Education; D) Gamification and Serious games; E) Network & Web Technologies Applications; F) Online experimentation and Virtual Laboratories; G) Multimedia Systems and Applications; H) Security and Privacy; I) Multimedia, Computer Vision and Image Processing; J) Cloud, Big Data Analytics and Applications; K) Human-Computer Interaction; L) Software Systems, Architectures, Applications and Tools; M) Onli...

  9. 6th International Conference in Methodologies and intelligent Systems for Technology Enhanced Learning

    Prieta, Fernando; Mascio, Tania; Gennari, Rosella; Rodríguez, Javier; Vittorini, Pierpaolo

    2016-01-01

    The 6th International Conference in Methodologies and intelligent Systems for Technology Enhanced Learning held in Seville (Spain) is host by the University of Seville from 1st to 3rd June, 2016. The 6th edition of this conference expands the topics of the evidence-based TEL workshops series in order to provide an open forum for discussing intelligent systems for TEL, their roots in novel learning theories, empirical methodologies for their design or evaluation, stand-alone solutions or web-based ones. It intends to bring together researchers and developers from industry, the education field and the academic world to report on the latest scientific research, technical advances and methodologies.

  10. Annual conference on nuclear technology. Nuclear power 2001: option for the future

    Anon.

    2001-01-01

    The Dresden Palace for Culture was the venue of the ANNUAL MEETING ON NUCLEAR TECHNOLOGY on May 15-17, 2001, the first to be held in Dresden and the first also to be held in one of the new German federal states. Although no nuclear plant is in operation in East Germany after the Greifswald Nuclear Power Station was decommissioned, nuclear technology continues to play an important role especially in research and university teaching in this part of Germany. The organizers of the conference, Deutsches Atomforum e.V. (DAtF) and Kerntechnische Gesellschaft e.V. (KTG), welcomed more than 1000 participants from nineteen countries. The three-day program, with its traditional, proven structure, featured plenary sessions on the first day, and specialized sessions, technical sessions, poster sessions, and other events on the following days. The partner country at the Annual Meeting on Nuclear Technology was Russia, with a session specially devoted to selected topics of the country. The conference was accompanied by a technical exhibition with company meeting points of vendors, suppliers, and service industries. A video film forum was arranged for the interested public which featured contributions about nuclear research, nuclear power plant operation, transport and storage as well as decommissioning. Another major event was a workshop on 'Preserving Competence in Nuclear Technology'. The plenary day is described in this summary report, while the results of the technical sessions as seen by the rapporteurs are printed elsewhere in this issue of atw 8/9, 2001. (orig.) [de

  11. A review of chemical heat pumps, thermodynamic cycles and thermal energy storage technologies for low grade heat utilisation

    Chan, C.W.; Ling-Chin, J.; Roskilly, A.P.

    2013-01-01

    A major cause of energy inefficiency is a result of the generation of waste heat and the lack of suitable technologies for cost-effective utilisation of low grade heat in particular. The market potential for surplus/waste heat from industrial processes in the UK is between 10 TWh and 40 TWh, representing a significant potential resource which has remained unexploited to date. This paper reviews selected technologies suitable for utilisation of waste heat energy, with specific focus on low grade heat, including: (i) chemical heat pumps, such as adsorption and absorption cycles for cooling and heating; (ii) thermodynamic cycles, such as the organic Rankine cycle (ORC), the supercritical Rankine cycle (SRC) and the trilateral cycle (TLC), to produce electricity, with further focus on expander and zeotropic mixtures, and (iii) thermal energy storage, including sensible and latent thermal energy storages and their corresponding media to improve the performance of low grade heat energy systems. - Highlights: ► The review of various thermal technologies for the utilisation of under exploited low grade heat. ► The analyses of the absorption and adsorption heat pumps possibly with performance enhancement additives. ► The analyses of thermal energy storage technologies (latent and sensible) for heat storage. ► The analyses of low temperature thermodynamic cycles to maximise power production.

  12. The PATT 26 conference Stockholm, Sweden 26–30 June 2012 : Technology Education in the 21st Century

    2012-01-01

    PATT 26 will be held at the Royal Institute of Technology (KTH) in Stockholm, the beautiful capital of Sweden. The PATT 26 conference is part of a two-conference arrangement organized by the Royal Institute of Technology and the Centre for School Technology Education, CETIS, Linköping University, under the common heading Technology Education in the 21st Century. We hereby welcome international colleagues to this golden opportunity to share and learn more about the latest on-going and complete...

  13. Proceedings of the 2. world conference on Pellets

    2006-07-01

    The conference and exhibition had over 1000 participants from 60 different countries. Subject areas covered by the conference were: Raw Materials For Densification; Pellet Production Technologies; Pellet Burning Technologies; Supply Chain Logistics; Environmental Issues; Marketing of Densified Fuels; Co-Generation of Heat and Electricity from Densified Fuels; 57 contributions have been separately indexed for the database

  14. Waste Heat Recovery. Technology and Opportunities in U.S. Industry

    Johnson, Ilona [BCS, Inc., Laurel, MD (United States); Choate, William T. [BCS, Inc., Laurel, MD (United States); Davidson, Amber [BCS, Inc., Laurel, MD (United States)

    2008-03-01

    This study was initiated in order to evaluate RD&D needs for improving waste heat recovery technologies. A bottomup approach is used to evaluate waste heat quantity, quality, recovery practices, and technology barriers in some of the largest energyconsuming units in U.S. manufacturing. The results from this investigation serve as a basis for understanding the state of waste heat recovery and providing recommendations for RD&D to advance waste heat recovery technologies.

  15. First COSTECH scientific and technological conference: Science and technology for growth and poverty reduction in Tanzania

    2006-01-01

    It is well recognised worldwide that science and technology is central to creating wealth and improving the quality of life. Indeed, the main difference between the developed countries and developing countries is the level of science, technology and innovative developments and applications. It is therefore necessary to undertake deliberate efforts to ensure that science science and technology is adequately and effectively applied if sustainable national economic development is to be achieved. Recognizing the role of Science and Technology in social economic development of the nation, the government of the URT has provided an enabling environment for the application of Science and Technology in its endeavour to bring about the desired national advancements. (author)

  16. 2nd International Conference on Electrical Systems, Technology and Information 2015

    Tanoto, Yusak; Lim, Resmana; Santoso, Murtiyanto; Pah, Nemuel

    2016-01-01

    This book includes the original, peer-reviewed research papers from the 2nd International Conference on Electrical Systems, Technology and Information (ICESTI 2015), held in September 2015 at Patra Jasa Resort & Villas Bali, Indonesia. Topics covered include: Mechatronics and Robotics, Circuits and Systems, Power and Energy Systems, Control and Industrial Automation, and Information Theory.    It explores emerging technologies and their application in a broad range of engineering disciplines, including communication technologies and smart grids. It examines hybrid intelligent and knowledge-based control, embedded systems, and machine learning. It also presents emerging research and recent application in green energy system and storage. It discusses the role of electrical engineering in biomedical, industrial and mechanical systems, as well as multimedia systems and applications, computer vision and image and signal processing. The primary objective of this series is to provide references for disseminat...

  17. Innovative food processing technology using ohmic heating and aseptic packaging for meat.

    Ito, Ruri; Fukuoka, Mika; Hamada-Sato, Naoko

    2014-02-01

    Since the Tohoku earthquake, there is much interest in processed foods, which can be stored for long periods at room temperature. Retort heating is one of the main technologies employed for producing it. We developed the innovative food processing technology, which supersede retort, using ohmic heating and aseptic packaging. Electrical heating involves the application of alternating voltage to food. Compared with retort heating, which uses a heat transfer medium, ohmic heating allows for high heating efficiency and rapid heating. In this paper we ohmically heated chicken breast samples and conducted various tests on the heated samples. The measurement results of water content, IMP, and glutamic acid suggest that the quality of the ohmically heated samples was similar or superior to that of the retort-heated samples. Furthermore, based on the monitoring of these samples, it was observed that sample quality did not deteriorate during storage. © 2013. Published by Elsevier Ltd on behalf of The American Meat Science Association. All rights reserved.

  18. State of technology of direct contact heat exchanging

    Vallario, R.W.; DeBellis, D.E.

    1984-05-01

    Specific objectives of this study were to assess the state of technology development and to identify and evaluate the constraints to wider use of direct contact heat exchanger (DCHE) technology in the U.S. The scope of this study is relatively broad; it includes many types of generic systems and end-use applications, both current and future. Domestic and foreign experience with DCHE technology are compared, although the primary focus is on domestic experience. Twenty-two distinct applications of DCHE technology were identified in this study and are examined in this report. The general format is to describe each system, explore its potential applications, discuss current and past research activities and identify major implementation barriers. Finally, as a result of discussions with principal users of DCHE systems and with other knowledgeable sources, generic and specific R and D needs to overcome specific implementation barriers have been identified. The following list of DCHE systems/concepts has been classified into four major end-uses; there is also a category for specialized (other) applications.

  19. 2nd International Conference on Ion Implantation in Semiconductors, Physics and Technology, Fundamental and Applied Aspects

    Graul, Jürgen

    1971-01-01

    In recent years great progress has been made in the field of ion implantation, particularly with respect to applications in semiconductors. It would be impos­ sible not to note the growing interest in this field, both by research groups and those directly concerned with production of devices. Furthermore, as several papers have pointed out, ion implantation and its associated technologies promise exciting advances in the development of new kinds of devices and provide power­ ful new tools for materials investigations. It was, therefore, appropriate to arrange the II. International Conference on Ion Implantation in Semiconductors within the rather short time of one year since the first conference was held in 1970 in Thousand Oaks, California. Although ori­ ginally planned on a small scale with a very limited number of participants, more than two hundred scientists from 15 countries participated in the Conference which was held May 24 - 28, 1971 at the Congress Center in Garmisch-Partenkirchen. This volume c...

  20. Transactions of the 8th International Conference on Structure Mechanics in Reactor Technology

    Browzin, B.S.

    1985-06-01

    These Transactions of the JK-panel session include preprints of papers or abstracts which are listed in Volume A, ''Introduction, General Contents, Authors Index,'' Proceedings of the 8th International Conference on Structural Mechanics in Reactor Technology. These papers represent the body of the JK-panel session, ''Status of Research in Structural and Mechanical Engineering for Nuclear Power Plants,'' sponsored by the US Nuclear Regulatory Commission. Additional papers are expected at this session, which will be available at the session. The purpose of publishing these Transactions is to inform the participants of the JK-panel session in advance on the papers to be presented and discussed at the session

  1. 9th Pacific Basin Nuclear Conference. Nuclear energy, science and technology - Pacific partnership. Proceedings Volume 2

    1994-04-01

    The theme of the 9th Pacific Basin Nuclear Conference held in Sydney from 1-6 May 1994, embraced the use of atom in energy production and in science and technology. The focus was on selected topics of current and on-going interest to countries around the Pacific Basin. The two-volume proceedings include both invited and contributed papers which have been indexed separately. This document, Volume 2 covers the following topics: education and training in Nuclear Science, public acceptance, nuclear safety and radiation protection, nuclear fuel resources and their utilisation, research reactors, cyclotrons and accelerators. refs., tabs., figs., ills

  2. Progress in ICRF heating technology and designs for future large tokamak heating systems

    Baity, F.W.; Swain, D.W.; Hoffman, D.J.; Becraft, W.R.; Bryan, W.E.; Mayberry, M.J.; Owens, T.L.; Yugo, J.J.

    1986-01-01

    The problem of advancing the technology of heating with the ion cyclotron range of frequencies (ICRF) for successful application to ignited plasmas is being addressed at Oak Ridge National Laboratory (ORNL) with the collaboration of several laboratories in the United States and Europe. The needs of experiments such as the Compact Ignition Tokamak (CIT) have been evaluated and conceptual approaches identified. These concepts and their components are examined in the laboratory and applied to present-day machines. The status of this program is presented

  3. PREFACE: EPS Euroconference XIX Nuclear Physics Divisional Conference: New Trends in Nuclear Physics Applications and Technology

    2006-06-01

    It was with great pleasure that the Department of Nuclear and Theoretical Physics of the University of Pavia and the INFN (Istituto Nazionale di Fisica Nucleare) Structure of Pavia organised the XIX Nuclear Physics Divisional Conference of the European Physical Society, which was held in the historical buildings of the University of Pavia from 5-9 September 2005. The Conference was devoted to the discussion of the most recent experimental and theoretical achievements in the field of Nuclear Physics applications, as well as of the latest developments in technological tools related to Nuclear Physics research. The University of Pavia has a long tradition in Physics and in Applied Physics, being the site where Alessandro Volta developed his "pila", the precursor of the modern battery. This is the place where the first experiments with electricity were conducted and where the term "capacitance" used for capacitors was invented. Today the University hosts a Triga Mark II nuclear reactor, which is used by the Departments of the University of Pavia and by other Universities and private companies as well. Moreover, Pavia is the site selected for the construction of the CNAO complex "Centro Nazionale di Adroterapia Oncologica" (National Centre for Oncological Hadrontherapy), planned for 2005-2008 which represents a unique facility in Italy and will be among the first complexes of this type in Europe. The Conference has gathered together experts in various fields from different countries and has been the occasion to review the present status and to discuss the new emerging trends in Nuclear Physics and its applications to multidisciplinary researches and the development of new technologies. The following topics were treated: Nuclear Techniques in Medicine and Life Sciences (Cancer Therapy, new Imaging and Diagnostics Tools, Radioisotope production, Radiation Protection and Dosimetry). Applications of Nuclear Techniques in Art, Archaeometry and other Interdisciplinary fields

  4. 6th Conference on Coal Utilization Technology; Dai 6 kai sekitan riyo gijutsu kaigi koenshu

    NONE

    1996-09-01

    The paper compiled the papers presented in the 6th Conference on Coal Utilization Technology held in September 1996. With relation to the fluidized bed boiler, reported were Field operation test of Wakamatsu PFBC combined cycle power plant and Development of pressurized internally circulating fluidized bed combustion technology. Regarding the coal reformation, Development of advanced coal cleaning process, Coal preparation and coal cleaning in the dry process, etc. Concerning the combustion technology, Study of the O2/CO2 combustion technology, Development of pressurized coal partial combustor, etc. About the CWM, Development of low rank coals upgrading and their CWM producing technology, Technique of CWM distribution system, etc. Relating to the coal ash, Engineering characteristics of the improved soil by deep mixing method using coal ash, Employment of fluidized bed ash as a basecourse material, On-site verification trials using fly ash for reclamation behind bulkheads, Water permeabilities of pulverized fuel ash, Separation of unburned carbon from coal fly ash through froth flotation, Practical use technology of coal ash (POZ-O-TEC), etc

  5. 2008 annual nuclear technology conference: opting out of the use of nuclear power. German special approach leads into a dead end of energy policy. Conference report

    Anon.

    2008-01-01

    The President of the Deutsches Atomforum, Dr. Walter Hohlefelder, emphasized in his opening address at the 2008 Annual Nuclear Technology Conference in Hamburg that the German special approach to nuclear power utilization led straight into a dead end of energy policy. ''The outcome is foreseeable: The ambitious German goals of carbon dioxide reduction are missed, the competitiveness of the country is jeopardized, dependency on foreign energy imports rises,'' Dr. Hohlefelder stated. In view of the growing challenges in energy policy Germany had no alternative but to reassess nuclear power. The only outcome of this reappraisal could be extension of the life of nuclear power plants currently in operation. This was necessary also in order to avoid an impending gap in German electricity supply, Dr. Hohlefelder added. He invited all stakeholders to join in an open, unbiased dialog. Dr. Hohlefelder openly criticized the continued ban on research into the development of new reactors. ''A policy of this kind, a policy which bans thinking, is unacceptable in a technology-oriented, industrialized nation such as Germany.'' Nuclear power technology as a high-tech area was a unique achievement which had contributed to the prosperity of the country. The Annual Nuclear Technology Conference, which was held for the 39th time this year, is one of the biggest specialized conferences in the nuclear field with an attendance, this year, of approximately 1300 participants from more than twenty nations. (orig.)

  6. 'THERMO-BRIDGE' between East and West for technology transfer and information exchange. 16. International conference on Thermal engineering and thermogrammetry (THERMO) with Exhibition and Pre-Session on Thermal Energy in Hungarian

    2009-01-01

    It was already organized as the International Conference on Thermal Engineering and Thermogrammetry (THERMO) in 1987. This conference is a series of biennial meetings. The developments of measurement theory and technologies help the energy-conscious design of thermal engineering equipment and processes as well as the better understanding of thermal phenomena in living organism. The conference will cover topics both the field of theory and application including nem measurements concepts; transducer technique mapping; contact, optical and IR imaging; biomedical and biotechnological applications; thermal informatics, automatic methods and systems for industrial energy management and process control; heat loss detection and analysis; heat and mass transfer; utilization of alternative energy; thermophysical properties as well as the common practice of thermal engineering. The programme included more than 40 papers from 19 countries. On the three days of oral presentation and poster workshops are organized whose topics will cover the following fields: Heat and mass transfer, thermotechnics; combustion and environmental protection; thermogravimetry; thermomechanics and defectometry; Infrared imagery and analysis, thermodynamics; practice of thermal engineering; medicine and biology. During the conference there were an exhibition of scientific and industrial instrumentation in the conference hall. (S.I.)

  7. AIP conference on accelerator driven transmutation technologies and applications, Las Vegas, Nevada, July 25-29, 1994

    Schriber, S.O.; Arthur, E.; Rodriguez, A.A.

    1995-07-01

    This conference was the first to bring together US and foreign researchers to define Accelerator Driven Transmutation Technology (ADTT) concepts in several important national and international application areas - nuclear waste transmutation, minimizing of world plutonium inventories, and long-term energy production. The conference covered a number of diverse technological areas - accelerators, target/blankets, separations, materials - that make up ADTT systems. The meeting provided one of the first opportunities for specialists in these technologies to meet together and learn about system requirements, components, and interface issues. It was also an opportunity to formulate plans for future developments in ADTT. During the conference over one hundred technical presentations were made describing ADTT system and technology concepts as well as the impact of ADTT on issues related to global plutonium management and the high-level nuclear waste problem areas. Separate abstracts have been entered into the database for articles from this report.

  8. AIP conference on accelerator driven transmutation technologies and applications, Las Vegas, Nevada, July 25-29, 1994

    Schriber, S.O.; Arthur, E.; Rodriguez, A.A.

    1995-01-01

    This conference was the first to bring together US and foreign researchers to define Accelerator Driven Transmutation Technology (ADTT) concepts in several important national and international application areas - nuclear waste transmutation, minimizing of world plutonium inventories, and long-term energy production. The conference covered a number of diverse technological areas - accelerators, target/blankets, separations, materials - that make up ADTT systems. The meeting provided one of the first opportunities for specialists in these technologies to meet together and learn about system requirements, components, and interface issues. It was also an opportunity to formulate plans for future developments in ADTT. During the conference over one hundred technical presentations were made describing ADTT system and technology concepts as well as the impact of ADTT on issues related to global plutonium management and the high-level nuclear waste problem areas. Separate abstracts have been entered into the database for articles from this report

  9. Report of a Planning Conference for Solar Technology Information Transfer (Nashville, Tennessee, September 28-29, 1977).

    Gleaves, Edwin S., Ed.

    A summary of the deliberations of the Planning Conference for Solar Technology Information Transfer--to discuss and outline a functioning solar energy technology network in the State of Tennessee--and a set of recommendations for future action are presented in this report. Topic areas include: (1) the Tennessee Regional Library Service; (2) the…

  10. Report of a Planning Conference for Solar Technology Information Transfer in Kentucky (Frankfort, September 11-12, 1978).

    Capps, Randall, Ed.

    This summary of the deliberations of the Planning Conference for Solar Technology Information Transfer includes an outline of a functioning solar energy technology network for the State of Kentucky and a set of recommendations for future action. Four main types of information agents were identified: (1) the State Library System; (2) the State…

  11. Technological and chemical properties of heat-treated Anatolian ...

    STORAGESEVER

    2009-06-03

    Jun 3, 2009 ... heat treatment temperature and time justifies these re- sults. Cellulose ..... properties of light-irradiated wood with heat treatment: Part 1. Effect ... Norway spruce (Picea abies) and birch (Betula pubescens) subjected to heat ...

  12. 3rd International Conference on Simulation and Modeling Methodologies, Technologies and Applications

    Koziel, Slawomir; Kacprzyk, Janusz; Leifsson, Leifur; Ören, Tuncer

    2015-01-01

    This book includes extended and revised versions of a set of selected papers from the 3rd International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2013) which was co-organized by the Reykjavik University (RU) and sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC). SIMULTECH 2013 was held in cooperation with the ACM SIGSIM - Special Interest Group (SIG) on SImulation and Modeling (SIM), Movimento Italiano Modellazione e Simulazione (MIMOS) and AIS Special Interest Group on Modeling and Simulation (AIS SIGMAS) and technically co-sponsored by the Society for Modeling & Simulation International (SCS), Liophant Simulation, Simulation Team and International Federation for Information Processing (IFIP). This proceedings brings together researchers, engineers, applied mathematicians and practitioners working in the advances and applications in the field of system simulation.

  13. Proceedings of 18th international conference on structural mechanics in reactor technology

    2005-07-01

    The 18th International Conference on Structural Mechanics in Reactor Technology was held on August 7-12, 2005 in Beijing, China, and Sponsored by International Association for Structural Mechanics in Reactor Technology, Chinese Nuclear Society, Chinese Society of Theoretical and Applied Mechanics, and Tsinghua University. 486 abstracts are Collected. The contents includes: opening, plenary and keynote presentations; computational mechanics; fuel and core structures; aging, life extension, and license renewal; design methods and rules for components; fracture mechanics; concrete material, containment and other structures; analysis and design for dynamic and extreme loads; seismic analysis, design and qualification; structural reliability and probabilistic safety assessment (PSA); operation, inspection and maintenance; severe accident management and structural evaluation; advanced reactors and generation IV reactors; decommissioning of nuclear facilities and waste management.

  14. European Conference on the Use of Modern Information and Communication Technologies

    2014-01-01

    This proceeding present the outcome of the 6th. European Conference on the Use of Modern Information and Communication Technologies. The ECUMICT 2014 was hold in Gent in March 2014 and presented recent research, that has a close relationship with practical implementation of Security for mobile communications and data access Interface technology for mobile devices Application development for mobile devices Positioning and localization, asset tracking and tracing Design and applications of RFID systems Developments in the framework of IoT and M2M communications Design and applications of WSNs Embedded programming for WSNs New developments and applications of WPAN/WLAN standards Mobile multimedia systems Wireless telecommunication networks and mobile services Optimization techniques in wireless networks Developments in ad-hoc and mesh networks Applications of digital signal processing for mobile applications Applications of MEMs in WSNs

  15. Proceedings of the 12th Space Photovoltaic Research and Technology Conference (SPRAT 12)

    1993-01-01

    The Twelfth Space Photovoltaic Research and Technology conference was held at the NASA Lewis Research Center from 20 to 22 Oct. 1992. The papers and workshops presented in this volume report substantial progress in a variety of areas in space photovoltaics. Topics covered include: high efficiency GaAs and InP solar cells, GaAs/Ge cells as commercial items, flexible amorphous and thin film solar cells (in the early stages of pilot production), high efficiency multiple bandgap cells, laser power converters, solar cell and array technology, heteroepitaxial cells, betavoltaic energy conversion, and space radiation effects in InP cells. Space flight data on a variety of cells were also presented.

  16. 4th International Conference on Computational Collective Intel- ligence Technologies and Applications (ICCCI 2012)

    Trawiński, Bogdan; Katarzyniak, Radosław; Jo, Geun-Sik; Advanced Methods for Computational Collective Intelligence

    2013-01-01

    The book consists of 35 extended chapters which have been selected and invited from the submissions to the 4th International Conference on Computational Collective Intelligence Technologies and Applications (ICCCI 2012) held on November 28-30, 2012 in Ho Chi Minh City, Vietnam. The book is organized into six parts, which are semantic web and ontologies, social networks and e-learning, agent and multiagent systems, data mining methods and applications, soft computing, and optimization and control, respectively. All chapters in the book discuss theoretical and practical issues connected with computational collective intelligence and related technologies. The editors hope that the book can be useful for graduate and Ph.D. students in Computer Science, in particular participants in courses on Soft Computing, Multiagent Systems, and Data Mining. This book can be also useful for researchers working on the concept of computational collective intelligence in artificial populations. It is the hope of the editors that ...

  17. First COSTECH scientific and technological conference: Science and technology for growth and poverty reduction in Tanzania

    Raphael, L.M.; Mushi, S.J.S.

    2006-01-01

    It is the fact that, most Tanzanians are using charcoal and firewood for their domestic cooking. This will continue to be so for many years to come. Therefore, it ; imperative that we design stoves that have minimal heat losses to reduce fuel consumption and hence, reduce deforestation and reduce domestic budget on charcoal and fuel wood. Biomass utilization has led to the disappearance of forests leading to severe soil erosion, drought, and destruction of water catchments as well s the ecosystem. This paper presents the biomass energy utilization trend in Tanzania and its consequences on the environment. The design of a biomass energy saving stove (KUUTE) which cuts down the charcoal consumption by 50% is also presented. The saving of fuel is due to controlled charging volume (no overfilling) and by minimizing the heat losses by radiation, convection and conduction. According to the laboratory tests carried out on three household stoves, namely, KUUTE, improved and all metal to compare fuel savings and rate of heat transfer, the KUUTE stove showed the best performance in terms of fuel savings as compared to the other two designs. Under the energy crisis, KUUTE stove will be part of the solution to conserve the forests and environment. So far over 4000 KUUTE stoves have been disseminated and over 100 artisans have been trained. (author)

  18. Indian Nuclear Society annual conference-1994 on advanced technologies related to nuclear power: proceedings

    Grover, R.B.

    1994-01-01

    The focal theme of the conference is advanced technologies related to nuclear power. Over the past three decades civilian nuclear power plants around the world have accumulated about 6000 reactor years of experience and have performed quite well. Overall safety record has been satisfactory. However, nuclear community is trying to compete with its own record by trying to enhance the safety characteristics of the best operating plant. A safety culture has been established in the nuclear establishments, which is providing impetus to advances in all aspects of nuclear technology all over the world. India has ongoing programmes for the development of advanced reactors and related advanced technologies. Evolution of pressurised heavy water reactors in India, developments made in the design of advanced heavy water reactor and the fast reactor programme, are some of the topics covered in addition to highlighting worldwide developments for the next generation of light water reactors. India is one of the few countries in the world where expertise about complete fuel cycle is available. Developments in the back end of the fuel cycle, use of thorium and plutonium and other related issues are also discussed. Technology control regimes being advocated and adopted by developed nations make it imperative for us to indigenise every equipment and component that goes into a power plant. In view of this, some aspects of manufacturing technologies, inspection techniques and maintenance problems are also covered. Relevant papers are processed separately for INIS. (M.K.V.)

  19. Papers presented to the Conference on Heat and Detachment in Crustal Extension on Continents and Planets

    1985-01-01

    Several topics relative to heat and detachment in crustal extension on continents and planets are discussed. Rifting on Venus, heat flow and continental breakup, magnetism, the mountains and tectonic processes of Io, and the ductile extension of planetary lithospheres are among the topics covered.

  20. IAEA Conference on Large Radiation Sources in Industry (Warsaw 1959): Which technologies of radiation processing survived and why?

    Zagorski, Z.P.

    1999-01-01

    The IAEA has organized in Warsaw an International Conference on Large Radiation Sources in Industry from 8 to 12 September 1959. Proceedings of the Conference have been published in two volumes of summary amount of 925 pages. This report presents analysis, which technologies presented at the Conference have survived and why. The analysis is interesting because already in the fifties practically full range of possibilities of radiation processing was explored, and partially implemented. Not many new technologies were presented at the next IAEA Conferences on the same theme. Already at the time of the Warsaw Conference an important role of economy of the technology has recognized. The present report selects the achievements of the Conference into two groups: the first concerns technologies which have not been implemented in the next decades and the second group which is the basis of highly profitable, unsubsidized commercial production. The criterion of belonging of the technology to the second group, is the value of the quotient of the cost of the ready, saleable product diminished by the cost of a raw material before processing, to the expense of radiation processing, being the sum of irradiation cost and such operations as transportation of the object to and from the irradiation facility. Low value of the quotient, as compared to successful technologies is prophesying badly as concerns the future of the commercial proposal. A special position among objects of radiation processing is occupied by radiation processing technologies direct towards the protection or improving of the environment. Market economy does not apply here and the implementation has to be subsidized. (author)

  1. Developing maintenance technologies for FBR's heat exchanger units by advanced laser processing

    Nishimura, Akihiko; Shimada, Yukihiro

    2011-01-01

    Laser processing technologies were developed for the purpose of maintenance of FBR's heat exchanger units. Ultrashort laser processing fabricated fiber Bragg grating sensor for seismic monitoring. Fiber laser welding with a newly developed robot system repair cracks on inner wall of heat exchanger tubes. Safety operation of the heat exchanger units will be improved by the advanced laser processing technologies. These technologies are expected to be applied to the maintenance for the next generation FBRs. (author)

  2. International Conference on Applications of Photonic Technology, Communications, Sensing, Materials and Signal Processing

    Lessard, Roger; ICAPT '96; Applications of photonic technology 2

    1997-01-01

    This book presents a current review ofphotonic technologies and their applications. The papers published in this book are extended versions of the papers presented at the Inter­ national Conference on Applications ofPhotonic Technology (ICAPT'96) held in Montreal, Canada, on July 29 to August 1, 1996. The theme of this event was "Closing the Gap Between Theory, Developments and Applications. " The term photonics covers both optics and optical engineering areas of growing sci­ entific and commercial importance throughout the world. It is estimated that photonic tech­ nology-related applications to increase exponentially over the next few years and will play a significant role in the global economy by reaching a quarter of a trillion of US dollars by the year 2000. The global interest and advancements of this technology are represented in this book, where leading scientists of twenty-two countries with advanced technology in photon­ ics present their latest results. The papers selected herein are ...

  3. Technologies for utilization of industrial excess heat: Potentials for energy recovery and CO2 emission reduction

    Broberg Viklund, Sarah; Johansson, Maria T.

    2014-01-01

    Highlights: • Technologies for recovery and use of industrial excess heat were investigated. • Heat harvesting, heat storage, heat utilization, and heat conversion technologies. • Heat recovery potential for Gävleborg County in Sweden was calculated. • Effects on global CO 2 emissions were calculated for future energy market scenarios. - Abstract: Industrial excess heat is a large untapped resource, for which there is potential for external use, which would create benefits for industry and society. Use of excess heat can provide a way to reduce the use of primary energy and to contribute to global CO 2 mitigation. The aim of this paper is to present different measures for the recovery and utilization of industrial excess heat and to investigate how the development of the future energy market can affect which heat utilization measure would contribute the most to global CO 2 emissions mitigation. Excess heat recovery is put into a context by applying some of the excess heat recovery measures to the untapped excess heat potential in Gävleborg County in Sweden. Two different cases for excess heat recovery are studied: heat delivery to a district heating system and heat-driven electricity generation. To investigate the impact of excess heat recovery on global CO 2 emissions, six consistent future energy market scenarios were used. Approximately 0.8 TWh/year of industrial excess heat in Gävleborg County is not used today. The results show that with the proposed recovery measures approximately 91 GWh/year of district heating, or 25 GWh/year of electricity, could be supplied from this heat. Electricity generation would result in reduced global CO 2 emissions in all of the analyzed scenarios, while heat delivery to a DH system based on combined heat and power production from biomass would result in increased global CO 2 emissions when the CO 2 emission charge is low

  4. International conference on innovative technologies for nuclear fuel cycles and nuclear power. Unedited proceedings

    2004-01-01

    Nuclear power is a significant contributor to the global supply of electricity, and continues to be the major source that can provide electricity on a large scale with a comparatively minimal impact on the environment. But it is evident that, despite decades of experience with this technology, nuclear power today remains mainly in a holding position, with its future somewhat uncertain primarily due to concerns related to waste, safety and security. One of the most important factors that would influence future nuclear growth is the innovation in reactor and fuel cycle technologies to successfully maximize the benefits of nuclear power while minimizing the associated concerns. The main objectives of the Conference were to facilitate exchange of information between senior experts and policy makers from Member States and international organizations on important aspects of the development of innovative technologies for future generations of nuclear power reactors and fuel cycles; to create an understanding of the social, environmental and economic conditions that would facilitate innovative and sustainable nuclear technologies; and to identify opportunities for collaborative work between Member States and international organizations and programmes. All relevant aspects of innovative technologies for nuclear fuel cycles and nuclear power were discussed in an open, frank and objective manner. These proceedings contain a summary of the results of the conference, invited and contributed papers, and summaries of panel discussions. No large increase in the use of nuclear energy is foreseen in the near and medium term, but is likely in the long term if developing country per-capita electricity consumption reaches that of the developed world. The nuclear sector including regulators view an increased use of nuclear energy as the solution for global sustainable energy needs considering that significant reductions in CO 2 emissions would be required. Although the current nuclear

  5. Industrial heat treatment of R-HPDC A356 automotive brake callipers [Conference paper

    Chauke, L

    2012-10-01

    Full Text Available brake callipers to the automotive industry. This research studied A356 brake callipers heat treated on the industrial scale with particular emphasis on the resulting microstructure, hardness and tensile properties. The eutectic Si...

  6. Proceedings of the Sixth International Conference on Management Science and Engineering Management : Focused on Electrical and Information Technology

    Yasinzai, Masoom; Lev, Benjamin

    2013-01-01

    Welcome to the proceedings of the Sixth International Conference on Management Science and Engineering Management (ICMSEM2012) held from November 11 to 14, 2012 at Quaid-i-Azam University, Islamabad, Pakistan and supported by Sichuan University (Chengdu, China), Quaid-i-Azam University (Islamabad, Pakistan) and The National Natural Science Foundation of China. The International Conference on Management Science and Engineering Management is the annual conference organized by the International Society of Management Science and Engineering Management. The goals of the Conference are to foster international research collaborations in Management Science and Engineering Management as well as to provide a forum to present current research results. The papers are classified into 8 sections: Computer and Networks, Information Technology, Decision Support System, Industrial Engineering, Supply Chain Management, Project Management, Manufacturing and Ecological Engineering. The key issues of the sixth ICMSEM cover variou...

  7. The Medical Imaging & Technology Alliance conference on research endpoints appropriate for Medicare coverage of new PET radiopharmaceuticals.

    Hillman, Bruce J; Frank, Richard A; Abraham, Brian C

    2013-09-01

    The outcomes of a 2011 Medical Imaging & Technology Alliance (MITA) conference helped shape considerations about what might be the most appropriate pathways for the regulatory and payment considerations of new PET radiopharmaceuticals. As follow-up to that conference, MITA convened a second conference of stakeholders to advise payers on what might be acceptable endpoints for clinical trials to support the coverage of novel PET agents. The conference involved experts on imaging and clinical research, providers of PET services, as well as representatives of interested medical societies, the PET industry, and the regulatory and payer communities. The principal outcome of their deliberations was that it was unrealistic to expect trials of new PET radiopharmaceuticals to directly demonstrate a health benefit. Rather, intermediate outcomes, such as a positive change in patient management, would be more efficient and appropriate.

  8. Whole Body Hyperthermia in Mice Confers Delayed Radioprotection at Cellular and Tissue Levels: Inducible Heat Shock Proteins as Endogenous Radioprotectors

    Malytina, Y. V.; Sements, T. N.; Semina, O. V.; Mosin, A. F.; Kabakov, A.

    2004-01-01

    It was previously shown on heat shock protein (Hsp)-over expressing cell lines that the increased intracellular content of Hsp 70 or Hsp27 is associated with the elevated radioresistance. However, it was so far unknown whether the in vivo Fsp induction by stressful preconditioning can confer radioprotection at the tissue and cellular levels. In the present study, we examined how the in vivo up-regulation of the Hsp expression in response to mild whole body hyperthermia (42 degrees C, 10 min) in mice changes susceptibility of their bone marrow stem cells and thymocytes to subsequent gamma-irradiation. to assess the expectable contribution of stress-inducible Hsp we used injections with Quercetin, a flavonoid inhibiting the stress-responsive Hsp induction. The results demonstrate that the bone marrow stem cells and thymocytes from heat-preconditioned mice were more radioresistant than those from the non-preconditioned animals. the radioprotection was well manifested if mice or their isolated thymocytes were irradiated 18-25 h after the in vivo hyperthermia. This delayed radioprotection resulting from the heat preconditioning was suppressed in Quercetin-injected mice. The revealed correlation between the intracellular Hsp accumulation and the acquired Quercetin-sensitive radioprotection suggests a beneficial role of Hsps as of endogenous radioprotectors. Our finding discovers new ways for artificial modulation of effects of irradiation on target cells via manipulating the Hsp expression. (Author) 17 refs

  9. Proceedings of the 27th intersociety energy conversion engineering conference

    Anon.

    1992-01-01

    This book contains the proceedings of the 27th Intersociety Energy Conversion Engineering Conference. Topics included: Stirling Cycle Analysis; Stirling Cycle Models; Stirling Refrigerators/Heat Pumps and Cryocoolers; Domestic Policy; Efficiency/Conservation; Stirling Solar Terrestrial; Stirling Component Technology; Environmental Impacts; Renewable Resource Systems; Stirling Power Generation; Stirling Heat Transport System Technology; and Stirling Cycle Loss Understanding

  10. International conference on information and communication technologies: From theory to applications, Damascus (SY), 24-28 April 2006, V. 1

    2006-01-01

    This publication includes the papers presented at the International conference on information and communication technologies: From theory to applications held in Damascus (Syria) from 24-28 April 2006. This proceeding is published in two volumes and aims to provide an outstanding opportunity for both academic and industrial communities alike to address new trends and challenges, emerging technologies and progress in standards on topics relevant to today's fast moving areas of information and communication technologies. The papers cover state-of-the-art technologies, theoretical concepts, standards, products implementation, ongoing research projects and innovation applications of the IC technologies use

  11. 10th International Conference on Vibration Engineering and Technology of Machinery

    2015-01-01

    The VETOMAC-X Conference covered a holistic plethora of relevant topics in vibration and engineering technology including condition monitoring, machinery and structural dynamics, rotor dynamics,  experimental techniques, finite element model updating, industrial case studies, vibration control and energy harvesting, and signal processing. These proceedings contain not only all of the nearly one-hundred peer-reviewed presentations from authors representing more than twenty countries, but also include six invited lectures from renowned experts: Professor K. Gupta, Mr W. Hahn, Professor A.W. Lees, Professor John Mottershead, Professor J.S. Rao, and Dr P. Russhard. This work is of interest to researchers and practitioners alike, and is an essential book for most of libraries of higher academic institutes.

  12. First COSTECH scientific and technological conference: Science and technology for growth and poverty reduction in Tanzania

    Mushi, S.J.S.; Raphael, L.M.

    2006-01-01

    Due to high rate of deforestation and environmental degradation caused by felling of trees for fuel, it is imperative that alternative energy resources be sought and exploited. This country, is rich in coal reserves estimated at 1.2 -1.9 billion tonnes, enough to serve the country for many years to come, but coal usage for domestic purposes i.e, cooking and crop drying is still not common in this country and therefore efforts are needed to promote its utilization. The paper discusses the problem of fuel wood use in Tanzania and the efforts made so far to develop the capacity for coal utilization as an alternative fuel to fuel wood. In addition, the paper highlights the experiences of formulating entrepreneurship in developing coal- biomass briquettes as a technology transfer model. The production and tests carried out on coal-biomass utilization technology, has shown that there is a breakthrough and potential for coal biomass utilization at domestic and institutional levels in Tanzania.(author)

  13. Emerging Computation and Information teChnologies for Education : Proceeding of 2012 International Conference on Emerging Computation and Information teChnologies for Education

    Xu, Linli; Tian, Wenya

    2012-01-01

    The 2012 International Conference on Emerging Computation and Information teChnologies for Education (ECICE 2012) was  held on Jan. 15-16, 2012, Hangzhou, China.  The main results of the conference are presented in this proceedings book of carefully reviewed and accepted paper addressing the hottest issues in emerging computation and information technologies used for education. The volume covers a wide series of topics in the area, including Computer-Assisted Education, Educational Information Systems, Web-based Learning, etc.

  14. Competition in the market for space heating. District heating as the infrastructure for competition among fuels and technologies

    Grohnheit, Poul Erik; Gram Mortensen, Bent Ole

    2003-01-01

    None of the EU directives on liberalisation of the electricity and gas markets are considering the district heating systems, although the district heating networks offer the possibility of competition between natural gas and a range of other fuels on the market for space heating. Cogeneration of electricity and heat for industrial processes or district heating is a technology option for increased energy efficiency and thus reduction of CO 2 emissions. In the mid-1990s less than 10% of the electricity generation in the European Union was combined production with significant variations among Member States. These variations are explained by different national legislation and relative power of institutions, rather than difference in industrial structure, climate or urban physical structure. The 'single energy carrier' directives have provisions that support the development of combined heat and power (CHP), but they do not support the development and expansion of the district heating infrastructure. The article is partly based on a contribution to the Shared Analysis Project for the European Commission DG Energy, concerning the penetration of CHP, energy saving, and renewables as instruments to meet the targets of the Kyoto Protocol within the liberalised European energy market. The quantitative and legal differences of the heat markets in selected Member States are described, and the consequences of the directives are discussed. Finally, we summarise the tasks for a European policy concerning the future regulation of district heating networks for CHP, emphasising the need for rules for a fair competition between natural gas and district heating networks

  15. W7-AS contributions to the 18th European conference on controlled fusion and plasma heating

    1991-06-01

    Optimum confinement in the Wendelstein 7-AS Stellarator - Ion heat conductivity, radial electric fields and CX-losses in the W7-AS stellarator - Thermal diffusivity from heat wave propagation in Wendelstein 7-AS - Impurity behaviour in W7-AS plasmas under different wall conditions - Particle transport and plasma edge behaviour in the W7-AS stellarator - Neutral injection experiments on W7-AS stellarator - MHD activity driven by NBI in the W7-AS stellarator - Simulation of the influence of coherent and random density fluctuations on the propagation of ECRH-beams in the W7-AS stellarator. (orig.)

  16. Papers presented by the SIG at the 13. European conference on controlled fusion and plasma heating

    1986-05-01

    In this report, papers gathered essentially around lower hybrid wave heating and current drive. Efficiency, saturation, conduction are studied; design studies are made for multijunction grill. Optimization of wave launching and absorption is researched. Lower hybrid current drive which is non-inductive current drive together with ohmic current is studied. At last suppression of sawtooth instabilities by current drive is also presented

  17. Simulation of heating by optical absorption in nanoparticle dispersions (Conference Presentation)

    Olbricht, Benjamin C.

    2017-02-01

    With the proliferation of highly confined, nanophotonic waveguides and laser sources with increasing intensity, the effects of laser heating will begin to greatly impact the materials used in optical applications. In order to better understand the mechanism of laser heating, its timescales, and the dispersion of heat into the material, simulations of nanoparticles in various media are presented. A generic model to describe a variety of nanoparticle shapes and sizes is desirable to describe complex phenomenon. These particles are dispersed into various solids, liquids, or gases depending on the application. To simulate nanoparticles and their interaction with their host material, the Finite Element Method (FEM) is used. Heat transfer following an absorption event is also described by a parabolic partial differential equation, and transient solutions are generated in response to continuous, pulsed, or modulated laser radiation. The simplest physical system described by FEM is that of a broadly-absorbing round-shaped nanoparticle dispersed in viscous host fluid or solid. Many experimental and theoretical studies conveniently describe a very similar system: a carbon "black" nanoparticle suspended in water. This material is well-known to exhibit nonlinear behavior when a laser pulse carrying 0.7 J/cm2 is incident on the material. For this process the FEM simulations agree with experimental results to show that a pulse of this fluence is capable of heating the solvent elements adjacent to the nanoparticle to their boiling point. This creates nonlinear scattering which is empirically observed as a nonlinear decrease in the transmitted power at this input fluence.

  18. Report on the 10th anniversary of international drug discovery science and technology conference, 8 - 10 november 2012, nanjing, china.

    Everett, Jeremy R

    2013-03-01

    The 10th Anniversary of International Drug Discovery Science and Technology (IDDST) Conference was held in Nanjing, China from 8 to 10 November 2012. The conference ran in parallel with the 2nd Annual Symposium of Drug Delivery Systems. Over 400 delegates from both conferences came together for the Opening Ceremony and Keynote Addresses but otherwise pursued separate paths in the huge facilities of the Nanjing International Expo Centre. The IDDST was arranged into 19 separate Chapters covering drug discovery biology, target validation, chemistry, rational drug design, pharmacology and toxicology, drug screening technology, 'omics' technologies, analytical, automation and enabling technologies, informatics, stem cells and regenerative medicine, bioprocessing, generics, biosimilars and biologicals and seven disease areas: cancer, CNS, respiratory and inflammation, autoimmune, emerging infectious, bone and orphan diseases. There were also two sessions of a 'Bench to Bedside to Business' Program and a Chinese Scientist programme. In each period of the IDDST conference, up to seven sessions were running in parallel. This Meeting Highlight samples just a fraction of the content of this large meeting. The talks included have as a link, the use of new approaches to drug discovery. Many other excellent talks could have been highlighted and the author has necessarily had to be selective.

  19. TRACE Authored Papers from the First through Ninth Annual Conferences on Rehabilitation Engineering Technology (1977-1986).

    Brady, Mary; And Others

    Brief papers authored by staff of the Trace Research and Development Center on Communication, Control, and Computer Access for Handicapped Individuals and presented at the first through ninth annual conferences on rehabilitation engineering technology are presented. Papers have the following titles and authors: "The Data Routing Module:…

  20. Technology for Consumers: Proceedings of the RESNA International Conference (Toronto, Ontario, Canada, June 6-11, 1992).

    Presperin, Jessica J., Ed.

    This proceedings document contains approximately 250 papers and posters presented at a conference on the advancement of rehabilitation and assistive technology. Individual sessions focused on the following topics: quantitative functional evaluation, upper limb and therapeutic stimulation, human-computer interface developments, information…

  1. Library Technology and Architecture; Report of a Conference Held at the Harvard Graduate School of Education, February 9, 1967.

    Harvard Univ., Cambridge, MA. Graduate School of Education.

    The purpose of the conference was to investigate the implications of new technologies for library architecture and to use the findings in planning new Library Research Facility for the Harvard Graduate School of Education. The first half of this document consists of reports prepared by six consultants on such topics as microforms, computers,…

  2. ETRAN 2002: Society for Electronics,Telecommunications, Computers, Automation and Nuclear Engineering. Section for Nuclear Techniques and Technology. Proceedings of the XLVI Conference. Vol IV

    Milosevic, M.; Jaksic, Z.; Bozic, D.; Potkonjak, V.

    2002-01-01

    The XLVI ETRAN Conference of the Society for Electronic, Telecommunications, Computers, Automation and Nuclear Engineering was held on 4-7 June, 2002. In the Proceedings of the Conference The Commission of the Nuclear Technique and Technology has 14 papers presented in three following sessions: 1. Actual problems in nuclear technologies; 2. Accelerator and reactor systems; and 3. Radiation protection and ionizing radiation uses

  3. BioSTEC 2017: 10th International Joint Conference on Biomedical Engineering Systems and Technologies : Proceedings Volume 5: HealthInf

    2017-01-01

    This book contains the proceedings of the 10th International Joint Conference on Biomedical Engineering Systems and Technologies (BIOSTEC 2017). This conference is sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC), in cooperation with the ACM

  4. INDUCTION HEATING IN HISTORY AND DEVELOPMENT. APPLICATION IN MODERN TRANSPORT REPAIRING TECHNOLOGIES

    Yu. Batyhin

    2017-06-01

    Full Text Available The technologies used in repair of vehicles were analyzed in the given paper. The shortcomings of the mechanical repair methods in question can be solved by using induction heating. Analysis of the stages of development and implementation of induction heating in industries showed effective performance of this technology and its opportunities for further improvement. An alternative repair technique, which consists in using induction heating, was proposed.

  5. 50th Anniversary Celebration: 46th Sagamore Army Materials Research Conference on Advances and Needs in Multi-Spectral Transparent Materials Technology

    Sands, James M; McCauley, James W

    2008-01-01

    ... technology issues of critical importance to the U.S. Army community. The 46th Sagamore Army Materials Research Conference continued this tradition with a focus on Advances and Needs in Multi-Spectral Transparent Materials Technology...

  6. TWO-STAGE HEAT PUMPS FOR ENERGY SAVING TECHNOLOGIES

    A. E. Denysova

    2017-09-01

    Full Text Available The problem of energy saving becomes one of the most important in power engineering. It is caused by exhaustion of world reserves in hydrocarbon fuel, such as gas, oil and coal representing sources of traditional heat supply. Conventional sources have essential shortcomings: low power, ecological and economic efficiencies, that can be eliminated by using alternative methods of power supply, like the considered one: low-temperature natural heat of ground waters of on the basis of heat pump installations application. The heat supply system considered provides an effective use of two stages heat pump installation operating as heat source at ground waters during the lowest ambient temperature period. Proposed is a calculation method of heat pump installations on the basis of groundwater energy. Calculated are the values of electric energy consumption by the compressors’ drive, and the heat supply system transformation coefficient µ for a low-potential source of heat from ground waters allowing to estimate high efficiency of two stages heat pump installations.

  7. Clean coal technology: gasification of South African coals - 2nd CSIR Biennial Conference

    Engelbrecht, AD

    2008-11-01

    Full Text Available between climate change and the use of fossil fuels such as coal. The development of CCTs has therefore received increased attention worldwide. CCTs are defined as “Technologies designed to enhance both the efficiency and the environmental acceptability... be utilised • The heat and mass transfer rates are high • Good temperature control can be achieved • Lower temperature operation increases refractory life • Limestone can be added for in bed capture of hydrogen sulphide • As there are no moving parts...

  8. Integrated design and optimization of technologies for utilizing low grade heat in process industries

    Kwak, Dong-Hun; Binns, Michael; Kim, Jin-Kuk

    2014-01-01

    Highlights: • Implementation of a modeling and design framework for the utilization of low grade heat. • Application of process simulator and optimization techniques for the design of technologies for heat recovery. • Systematic and holistic exploitation for the recovery of industrial low grade heat. • Demonstration of the applicability and benefit of integrated design and optimization framework through a case study. - Abstract: The utilization of low grade heat in process industries has significant potential for improving site-wide energy efficiency. This paper focuses on the techno-economic analysis of key technologies for energy recovery and re-use, namely: Organic Rankine Cycles (ORC), boiler feed water heating, heat pumping and absorption refrigeration in the context of process integration. Process modeling and optimization in a holistic manner identifies the optimal integrated configuration of these technologies, with rigorous assessment of costs and technical feasibility of these technologies. For the systematic screening and evaluation of design options, detailed process simulator models are evaluated and optimization proceeds subject to design constraints for the particular economic scenarios where technology using low grade heat is introduced into the process site. Case studies are presented to illustrate how the proposed modeling and optimization framework can be useful and effective in practice, in terms of providing design guidelines and conceptual insights for the application of technologies using low grade heat. From the case study, the best options during winter are the ORC giving a 6.4% cost reduction for the ideal case with low grade heat available at a fixed temperature and boiler feed water heating giving a 2.5% cost reduction for the realistic case with low grade heat available at a range of temperatures. Similarly during summer boiler feed water heating was found to be the best option giving a 3.1% reduction of costs considering a

  9. Computer Technologies in Education. Proceedings of the International Conference on Computer Technologies in Education (Kiev, Ukraine, September 14-17, 1993).

    Petrushin, V., Ed.; Dovgiallo, A., Ed.

    The conference reported in this document provides a meeting place for researchers from around the world, where the emphasis is on new ideas connected to computer technologies in education. This volume contains 140 extended abstracts selected by the program committee and organized into the following categories: (1) educational informational…

  10. Heating technologies for limiting biomass consumption in 100% renewable energy systems

    Mathiesen, Brian Vad; Lund, Henrik; Connolly, David

    2011-01-01

    district heating enables the use of combined heat and power production (CPH) and other renewable resources than biomass such as large-scale solar thermal, large-heat pumps, geothermal heat, industrial surplus heat etc. which is important for reducing the biomass consumption. Where the energy density......The utilisation of biomass poses large challenges in renewable energy systems and buildings account for a substantial part of the energy supply also in 100% renewable energy systems. The analyses of heating technologies show that district heating systems are especially important in limiting...... the dependence on biomass resources and to create cost effective systems. District heating systems are especially important in renewable energy systems with large amounts of fluctuating renewable energy sources as it enables fuel efficient and lower cost energy systems with thermal heat storages. And also...

  11. Conceptual design of an active magnetic regenerative heat circulator based on self-heat recuperation technology

    Kotani, Yui; Kansha, Yasuki; Tsutsumi, Atsushi

    2013-01-01

    A conceptual design of an active magnetic regenerative (AMR) heat circulator for self-heat recuperation to realize energy savings in thermal processes is proposed. The process fluid heat is recuperated by the magnetocaloric effect of ferromagnetic material through the AMR heat circulation cycle. In an AMR heat circulator, all the process fluid heat is circulated and no make-up heat is added to raise the process fluid to its set temperature. A one-dimensional mathematical model of the AMR heat circulator was constructed to understand its behavior and verify its energy-saving potential. From the constructed one-dimensional mathematical model, it is seen that AMR heat circulator has potential to drastically reduce the total energy consumption in a thermal process. The temperature–entropy diagram shows that in order to gain the maximum energy saving, optimization of the parameters such as the flow rate and geometry of the ferromagnetic working material beds is needed. - Highlights: • Self-heat recuperative active magnetic regenerative heat circulator is introduced. • One-dimensional model is constructed to verify its energy-saving potential. • Total energy consumption in thermal process is drastically reduced. • Further energy can be saved by reducing the overlapping of thermodynamic cycles

  12. 9th International Bielefeld Conference 2009: Upgrading the eLibrary: Enhanced Information Services Driven by Technology and Economics

    Almuth Gastinger

    2009-10-01

    Full Text Available Thisarticle reports on the 9th International Bielefeld Conference ‘Upgrading the eLibrary: Enhanced Information Services Driven by Technology and Economics’, 3-5 February 2009, in Bielefeld, Germany. The conference focused on future challenges for libraries regarding the development of information services and infrastructures that meet the changing needs of scholarly communication, collaboration (e-science and publication (open access as well as new requirements regarding teaching and learning (virtual learning spaces. In addition attention was paid to economic conditions and strategic positioning of libraries as a general framework for information services.

  13. Overexpression of a heat shock protein (ThHSP18.3) from Tamarix hispida confers stress tolerance to yeast.

    Gao, Caiqiu; Jiang, Bo; Wang, Yucheng; Liu, Guifeng; Yang, Chuanping

    2012-04-01

    It is well known that plant heat shock proteins (HSPs) play important roles both in response to adverse environmental conditions and in various developmental processes. However, among plant HSPs, the functions of tree plant HSPs are poorly characterized. To improve our understanding of tree HSPs, we cloned and characterized an HSP gene (ThHSP18.3) from Tamarix hispida. Sequence alignment reveals that ThHSP18.3 belongs to the class I small heat shock protein family. A transient expression assay showed that ThHSP18.3 protein was targeted to the cell nucleus. Treatment of Tamarix hispida with cold and heat shock highly induced ThHSP18.3 expression in all studied leaves, roots and stems, whereas, treatment of T. hispida with NaCl, NaHCO(3), and PEG induced ThHSP18.3 expression in leaves and decreased its expression in roots and stems. Further, to study the role of ThHSP18.3 in stress tolerance under different stress conditions, we cloned ThHSP18.3 into the pYES2 vector, transformed and expressed the vector in yeast Saccharomyces cerevisiae. Yeast cells transformed with an empty pYES2 vector were employed as a control. Compared to the control, yeast cells expressing ThHSP18.3 showed greater tolerance to salt, drought, heavy metals, and both low and high temperatures, indicating that ThHSP18.3 confers tolerance to these stress conditions. These results suggested that ThHSP18.3 is involved in tolerance to a variety of stress conditions in T. hispida.

  14. Analyzing the Discourse of Chais Conferences for the Study of Innovation and Learning Technologies via a Data-Driven Approach

    Vered Silber-Varod

    2016-12-01

    Full Text Available The current rapid technological changes confront researchers of learning technologies with the challenge of evaluating them, predicting trends, and improving their adoption and diffusion. This study utilizes a data-driven discourse analysis approach, namely culturomics, to investigate changes over time in the research of learning technologies. The patterns and changes were examined on a corpus of articles published over the past decade (2006-2014 in the proceedings of Chais Conference for the Study of Innovation and Learning Technologies – the leading research conference on learning technologies in Israel. The interesting findings of the exhaustive process of analyzing all the words in the corpus were that the most commonly used terms (e.g., pupil, teacher, student and the most commonly used phrases (e.g., face-to-face in the field of learning technologies reflect a pedagogical rather than a technological aspect of learning technologies. The study also demonstrates two cases of change over time in prominent themes, such as “Facebook” and “the National Information and Communication Technology (ICT program”. Methodologically, this research demonstrates the effectiveness of a data-driven approach for identifying discourse trends over time.

  15. Research and Development Roadmap for Water Heating Technologies

    Goetzler, William [Navigant Consulting Inc.; Gagne, Claire [Navigant Consulting Inc.; Baxter, Van D [ORNL; Lutz, James [Lawrence Berkeley National Laboratory (LBNL); Merrigan, Tim [National Renewable Energy Laboratory (NREL); Katipamula, Srinivas [Pacific Northwest National Laboratory (PNNL)

    2011-10-01

    Although water heating is an important energy end-use in residential and commercial buildings, efficiency improvements in recent years have been relatively modest. However, significant advancements related to higher efficiency equipment, as well as improved distribution systems, are now viable. DOE support for water heating research, development and demonstration (RD&D) could provide the impetus for commercialization of these advancements.

  16. Advances in Integrated Heat Pipe Technology for Printed Circuit Boards

    Wits, Wessel Willems; te Riele, Gert Jan

    2010-01-01

    Designing thermal control systems for electronic products has become very challenging due to the continuous miniaturization and increasing performance demands. Two-phase cooling solutions, such as heat pipes or vapor chambers, are increasingly used as they offer higher thermal coefficients for heat

  17. Technologies and Materials for Recovering Waste Heat in Harsh Environments

    Nimbalkar, Sachin U. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Thekdi, Arvind [E3M, Inc. North Potomac, MD (United States); Rogers, Benjamin M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kafka, Orion L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wenning, Thomas J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2014-12-15

    A large amount (7,204 TBtu/year) of energy is used for process heating by the manufacturing sector in the United States (US). This energy is in the form of fuels mostly natural gas with some coal or other fuels and steam generated using fuels such as natural gas, coal, by-product fuels, and some others. Combustion of these fuels results in the release of heat, which is used for process heating, and in the generation of combustion products that are discharged from the heating system. All major US industries use heating equipment such as furnaces, ovens, heaters, kilns, and dryers. The hot exhaust gases from this equipment, after providing the necessary process heat, are discharged into the atmosphere through stacks. This report deals with identification of industries and industrial heating processes in which the exhaust gases are at high temperature (>1200 F), contain all of the types of reactive constituents described, and can be considered as harsh or contaminated. It also identifies specific issues related to WHR for each of these processes or waste heat streams.

  18. Proceedings of the international conference on vacuum science and technology and SRS vacuum systems. V.1: accelerators and SRS systems

    Venkatramani, N.; Sinha, A.K.

    1995-01-01

    An International Conference on Vacuum Science and Technology, INCOVAST-95 was held during January 30 - February 2, 1995 at the Centre for Advanced Technology (CAT), Indore under the aegis of the Indian Vacuum Society. Centre for Advanced Technology has a major programme of design and construction of a 450 MeV electron storage ring, synchrotron radiation source Indus-1 followed by the 1.25 GeV Indus-2. To match the activities at the centre, the present conference had ultrahigh vacuum for Synchrotron Radiation Sources (SRSs) as the main theme. Three major topics, namely accelerators and SRS systems, thin films and surfaces, vacuum components and applications were covered in detail. A short summary of the discussions is also included in the proceedings. Papers relevant to INIS are indexed separately

  19. New Developments in the Field of Materials for Electric Power Engineering. Paper presented at the ETG Conference (Energy Technology Society) 1981

    1981-01-01

    The Conference Proceedings comprise 21 papers divided into 4 theme groups: insulating materials and insulating systems; structural materials; magnetic materials; conductor and contact materials. Individual papers deal with: the search for a new insulating system for transformers; insulating oils and liquids; an insulating system for electric machines of high heat resistance: progress in insulation of exciter winding in hydroelectic generators and other large synchronous machines; insulating systems for extreme envronmental conditions; behavior of silicon elastomer, organic, and polyethylene insulating materials; development of new magnetic materials, in particular: metallic glasses; amorphous magnetic materials; pressed iron powder parts; modern permanent magnetic materials; development of new contact materials for power switchgear; alternative switchgear technologies; a new cryogenic conductor structured element based on V/sub 2/O/sub 3/ ceramic; choice of material for fuses.

  20. Heat exchanger technologies for the global environment. PWR-Vol. 25

    Maurer, J.R.

    1994-01-01

    This is the Committee's largest compilation of papers in the fourteen years that ASME has sponsored one or more sessions at the Joint Power Generation Conference. In addition to the twenty-two papers offered at the conference, one session contained a panel discussion during which five industry specialists related their experiences and interpretations. Many of the presentations of the past few years have been made by authors from foreign lands as the conference has expanded to an international forum. This years' theme of global impact is included in the heat exchanger presentations from the USA and abroad. In addition, ASME has encouraged authors to make the subjects of their presentations more apropos to current concerns. New concepts and designs, particularly with PC programs in mind, is one specific area that is addressed. Other topics such as materials selection, coatings to extend performance life, minimizing the effects of microbiologically influenced corrosion, zebra mussel control and new approaches to heat transfer design are some of the subjects covered at the conference and in this volume. Nineteen papers have been processed separately for inclusion in the appropriate data bases

  1. Implementation of heat production and storage technology and devices in power systems

    Romanovsky, G.; Mutale, J.

    2012-01-01

    Implementation of heat storage devices and technologies at power generation plants is a promising way to provide more efficient use of natural energy resources. Heat storage devices can partly replace conventional heating technologies (such as direct use of fossil fuels) during peak energy demand or in the situations where heat and electricity supply and demand do not coincide and to obtain low cost heat energy which can be further transmitted to industrial, commercial and domestic consumers. This paper presents the innovative Heat Production and Storage Device and its application at conventional, nuclear and renewable power generation plants for optimization and balancing of electricity grids. The Heat Production and Storage Device is a vessel type induction-immersion heat production and storage device which produces pre-heated water under pressure for heat energy conservation. Operation of this device is based on simultaneous and/or sequential action of an inductor and an immersion heater and can be easily connected to the electricity network as a single or a three phase unit. Heat energy accumulated by the Heat Production and Storage Device can be utilized in different industrial technological processes during periods of high energy prices. - Highlights: ► Heat Production and Storage Device for energy conservation within low load hours. ► Simultaneous and/or sequential operation of the inductor and immersion heater. ► Transform the energy of low frequency electrical current (50 Hz) into heat energy. ► Connection to the electricity network either in single or three phase unit. ► Heat Production and Storage Device will enhance the economic value of the system.

  2. Federal Technology Alert: Ground-Source Heat Pumps Applied to Federal Facilities-Second Edition; FINAL

    Hadley, Donald L

    2001-01-01

    This Federal Technology Alert, which was sponsored by the U.S. Department of Energy's Office of Federal Energy Management Programs, provides the detailed information and procedures that a Federal energy manager needs to evaluate most ground-source heat pump applications. This report updates an earlier report on ground-source heat pumps that was published in September 1995. In the current report, general benefits of this technology to the Federal sector are described, as are ground-source heat pump operation, system types, design variations, energy savings, and other benefits. In addition, information on current manufacturers, technology users, and references for further reading are provided

  3. Industrial Waste Heat Recovery - Potential Applications, Available Technologies and Crosscutting R&D Opportunities

    Thekdi, Arvind [E3M Inc, North Potomac, MD (United States); Nimbalkar, Sachin U. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-01-01

    The purpose of this report was to explore key areas and characteristics of industrial waste heat and its generation, barriers to waste heat recovery and use, and potential research and development (R&D) opportunities. The report also provides an overview of technologies and systems currently available for waste heat recovery and discusses the issues or barriers for each. Also included is information on emerging technologies under development or at various stages of demonstrations, and R&D opportunities cross-walked by various temperature ranges, technology areas, and energy-intensive process industries.

  4. Laser application of heat pipe technology in energy related programs

    Carbone, R.J.

    1975-01-01

    The design and operating parameters for a heat pipe laser utilizing metal vapors are proposed. The laser would be applied to laser induced fusion, laser induced chemistry, laser isotope separation, and power transport using optical beams. (U.S.)

  5. High-efficiency heat pump technology using metal hydrides (eco-energy city project)

    Morita, Y.; Harada, T.; Niikura, J.; Yamamoto, Y.; Suzuki, J. [Human Environmental Systems Development Center, Matsushita Electric Industrial Co., Ltd., Moriguchi, Osaka (Japan); Gamo, T. [Corporate Environmental Affairs Div., Matsushita Electric Industrial Co., Ltd., Kadoma, Osaka (Japan)

    1999-07-01

    Metal hybrides are effective materials for utilizing hydrogen as a clean energy medium. That is, when the metal hydrides absorb or desorb the hydrogen, a large heat output of reaction occurs. So, the metal hydrides can be applied to a heat pump. We have researched on a high efficiency heat pump technology using their metal hydrides. In this report, a double effect type metal hydride heat pump configuration is described in which the waste heat of 160 C is recovered in a factory cite and transported to areas far distant from the industrial district. In the heat recovery unit, a low pressure hydrogen is converted into highly effective high pressure hydrogen by applying the metal hydrides. Other metal hydrides perform the parts of heating by absorbing the hydrogen and cooling by desorbing the hydrogen in the heat supply unit. One unit scale of the system is 3 kW class as the sum of heating and cooling. This system using the hydrogen absorbing alloy also has good energy storage characteristics and ambient hydrogen pressure self-safety control ability. Furthermore, this heating and cooling heat supply system is not harmful to the natural environment because it is a chlorofluorocarbon-free, and low noise type system. We have developed in the following element technologies to attain the above purposes, that is development of hydrogen absorbing alloys with high heat outputs and technologies to construct the heat pump system. This study is proceeded at present as one of the programs in New Sunshine Project, which aims for development of ingenious energy utilization technology to achieve reduction of primary energy consumption with keeping cultural and wealthy life and preventing deterioration of global environment. (orig.)

  6. Residential home heating: The potential for air source heat pump technologies as an alternative to solid and liquid fuels

    Kelly, J. Andrew; Fu, Miao; Clinch, J. Peter

    2016-01-01

    International commitments on greenhouse gases, renewables and air quality warrant consideration of alternative residential heating technologies. The residential sector in Ireland accounts for approximately 25% of primary energy demand with roughly half of primary home heating fuelled by oil and 11% by solid fuels. Displacing oil and solid fuel usage with air source heat pump (ASHP) technology could offer household cost savings, reductions in emissions, and reduced health impacts. An economic analysis estimates that 60% of homes using oil, have the potential to deliver savings in the region of €600 per annum when considering both running and annualised capital costs. Scenario analysis estimates that a grant of €2400 could increase the potential market uptake of oil users by up to 17% points, whilst a higher oil price, similar to 2013, could further increase uptake from heating oil users by 24% points. Under a combined oil-price and grant scenario, CO_2 emissions reduce by over 4 million tonnes per annum and residential PM_2_._5 and NO_X emissions from oil and peat reduce close to zero. Corresponding health and environmental benefits are estimated in the region of €100m per annum. Sensitivity analyses are presented assessing the impact of alternate discount rates and technology performance. This research confirms the potential for ASHP technology and identifies and informs policy design considerations with regard to oil price trends, access to capital, targeting of grants, and addressing transactions costs. - Highlights: • Air Source Heat Pumps can offer substantial savings over oil fired central heating. • Significant residential air and climate emission reductions are possible. • Associated health and environmental benefits are estimated up to €100m per annum. • Results can inform policy interventions in the residential market to support change.

  7. Technology-enabled assessment of health professions education: consensus statement and recommendations from the Ottawa 2010 Conference

    Amin, Zubair; Boulet, John R; Cook, David A

    2011-01-01

    The uptake of information and communication technologies (ICTs) in health professions education can have far-reaching consequences on assessment. The medical education community still needs to develop a deeper understanding of how technology can underpin and extend assessment practices....... This article was developed by the 2010 Ottawa Conference Consensus Group on technology-enabled assessment to guide practitioners and researchers working in this area. This article highlights the changing nature of ICTs in assessment, the importance of aligning technology-enabled assessment with local context...... and needs, the need for better evidence to support use of technologies in health profession education assessment, and a number of challenges, particularly validity threats, that need to be addressed while incorporating technology in assessment. Our recommendations are intended for all practitioners across...

  8. CSP-IEEE Instrumentation and Measurement Technology Conference 2016 (IEEE 12MTC 2016)

    2016-08-22

    theme, the "pulse" means the signal (message) from industries, nature and humans after excited by the economic activities of humans; "measuring" is to...Items Amount Remakes Conference Venue Expense 2,098,850.00 1. Conference Room 1,374,850.00 All purchases were obeyed 2. Projector and Audio

  9. District heating as the infrastructure for competition among fuels and technologies

    Grohnheit, Poul Erik; Mortensen, Bent Ole Gram

    2016-01-01

    for increased energy efficiency. Additional technologies suitable for small-scale networks are heat pumps, solar panels and local biomass in the form of straw or biogas. For large-scale urban networks, incineration of urban waste and geothermal heat are key technologies. With heat storages district heating...... infrastructure can contribute significantly to balancing the intermittency of wind power. This paper is an update of the authors' article published in Energy Policy in 2003 focusing on the European directives focusing on competition in the electricity and gas network industries and promotion of renewables...... and cogeneration but limited support for the development and expansion of the district heating infrastructure. It was partly based on a contribution to the Shared Analysis Project for the European Commission Directorate-General for Energy, concerning the penetration of combined heat and power (CHP), energy saving...

  10. Transactions of the 10th international conference on structual mechanics in reactor technology

    Hadjian, A.H.

    1989-01-01

    In this book, a wide spectrum of subjects is covered, including theoretical developments in structural mechanics, loading conditions, behavior of materials, fluid mechanics, operating experience, accident sequences, and calculational procedures. As a result, problems of structural mechanics analysis are focused within the general context of the design, reliability, and safety of nuclear reactors. Operating plant performance and life extension, waste repository technology and regulatory research have been formalized as distinct Divisions. The papers are theoretical or applied, or they address both of these aspects to demonstrate application of developed methods to solve specific design problems and show how well actual behavior correlates with theory. These paper explore in detail the mechanical design and system integration of fusion power reactors; thermohydraulics, structural mechanics and life-time evaluations of reactor components as first wall diverter/limiter, plasma heating devices, breeding blanket and shielding, magnet coils and supports, and vacuum containment systems, and structural analysis and comparison with measured data

  11. Break-through technologies. Power and/or heat generation; Genombrottstekniker. Kraft- vaermeproduktion

    NONE

    1996-12-31

    This report gives a compilation of technologies for the future in producing electric power and heat. The focus is on the areas Cogeneration, Fuel cells, Wind power, Solar cells, Artificial photosynthesis, and Hydrogen. Refs, 9 figs, 5 tabs

  12. Heat pipes. Dictionary of terms, design, technology and application. Fiz. -energ. in-t. Obminsk. (Prepr. )

    Strozhkov, A I; Zayets, V V

    1980-01-01

    Types of capillary-porous structures, their advantages and shortcomings, and technology of fabrication are examined. Methods are described for regulating the heat pipes, their configuration and area of application.

  13. The local heat treatment equipment and technology of the pipelines welded joints

    Korol'kov, P.M.

    1998-01-01

    The principal methods and equipment for local treatment of the pipe-lines weld joints in different industry branches is described. Recommendations about heat treatment equipment and technology application are given

  14. XIII International science and technology conference High-tech chemical technologies-2010 with elements of Scientific school for young people Innovations in chemistry: achievements and prospects. Summaries of reports

    2010-01-01

    Materials of the XIII International science and technology conference High-tech chemical technologies-2010 with elements of Scientific school for young people Innovations in chemistry: achievements and prospects (29 June-2 July 2010, Ivanovo) are presented. During the conference the following areas: theoretical aspects of chemical technology; technology of deep oil refining and the production of organic substances; technology of drugs and biologically active substances; technology of inorganic materials, polymers and composites based on them - the technological principles and methods of synthesis, modification, and processing; environmental and economic problems of chemical technologies and their solutions are considered [ru

  15. Heat pipe technology. a bibliography with abstracts. Quarterly update, 31 March 1975

    1975-01-01

    Heat Pipe Technology is a continuing bibliographic summary of research on the subject of the heat pipe. The first volume was published in 1971. The 1972, 1973, and 1974 Annual Supplements have been published and distributed. This update cites additional references for 1975

  16. Forum environmental and energy technology 2013. Power-heat cogeneration and air pollution prevention

    Carlowitz, Otto; Meyer, Sven

    2013-01-01

    The volume covers the following topics: The teaching reward 2013 - concept and implementation of the ''Forum environmental and energy technology''; energy efficient air pollution control and material recovery; air pollution control by oxidation; electrical energy production from low-temperature waste heat (ORC processes), electrical power production and process heat utilization.

  17. Proceedings of the international conference on nascent technologies in the engineering fields of mechanical, electrical, electronics and telecommunication and computer/information technology: souvenir

    2015-01-01

    This conference contains papers on grid computing, advanced networking, data mining, biometric technologies, social networks and social aspects of information technology, robotics and mechatronics, advances in manufacturing technology, modelling and simulation of mechanical systems, recent trends in refrigeration and air conditioning, energy conservation and alternative fuels and advances in vibration control and its techniques. It also addresses issues in the field of power generation transmission and distribution, energy management and energy efficiency, applications of power electronics and solid state devices, renewable energy technology, distributed generation and micro grid, drives, controls and automation and power quality. The electronics and telecommunication track received good response in the fields of wired and wireless communication, advanced communications, digital signal processing and its applications, optical and microwave communication, embedded and VLSI technology, micro electronics and nano-technology, antenna applications and solid state devices. Papers relevant to INIS are indexed separately

  18. Slowpoke: a role for nuclear technology in district heating

    Lynch, G.F.

    1987-08-01

    The successful application of the SLOWPOKE concept to satisfy the heating needs of institutions and building complexes is described. Although the load factor for heating in Japan may not be as high as those experienced in other countries of the northern hemipshere, this particular application clearly demonstrates that small, special purpose, ultra-safe nuclear energy sources are technically and economically viable. They can be designed for easy operation and maintenance, to be located in urban areas and remote communities, thereby satsifying a broad spectrum of energy needs that cannot be served by central nuclear electrical generators

  19. Packaged solar water heating technology: twenty years of progress

    Morrison, Graham; Wood, Byard

    2000-01-01

    The world market for packaged solar water heaters is reviewed, and descriptions are given of the different types of solar domestic water heaters (SDWH), design concepts for packaged SDWH, thermosyphon SDWH, evacuated insulation and excavated tube collectors, seasonally biased solar collectors, heat pump water heaters, and photovoltaic water heaters. The consumer market value for SDWHs is explained, and the results of a survey of solar water heating are summarised covering advantages, perceived disadvantages, the relative importance of purchase decision factors, experience with system components, and the most frequent maintenance problems. The durability, reliability, and performance of SDWHs are discussed

  20. Disruptive Innovation in Manufacturing Engineering towards the 4th Industrial Revolution: 8th International Conference on Digital Enterprise Technology

    Constantinescu, Carmen; Bauer, Wilhelm; Sauer, Olaf; Maropoulos, Paul

    2014-01-01

    The CIRP sponsored DET 2014 conference focusses on the employment of modern ICT-technologies and tools for the modeling, simulation, optimization, advanced control and monitoring, real-time visualization of products, factories and manufacturing processes. The addressed areas cover all phases of product, factory and manufacturing processes life cycle starting with product design and development, engineering of factories, machines, equipment and technical processes, commissioning and rump-up, f...

  1. ETRAN 1999: Society for Electronics,Telecommunications, Computers, Automation and Nuclear Engineering. Section for Nuclear Techniques and Technology. Proceedings of the XLIII Conference. Vol IV

    Spasojevic, D.; Smiljanic, M.; Bozic, D.; Stankovic, D.

    1999-01-01

    The XLIII ETRAN Conference of the Society for Electronic, Telecommunications, Computers, Automation and Nuclear Engineering was held on 20-22 Sep, 1999. In the Proceedings of the Conference The Commission of the Nuclear Technique and Technology has 19 papers presented in three sessions.

  2. Residential gas-fired sorption heat pumps. Test and technology evaluation

    Naeslund, M.

    2008-12-15

    Heat pumps may be the next step in gas-fired residential space heating. Together with solar energy it is an option to combine natural gas and renewable energy. Heat pumps for residential space heating are likely to be based on the absorption or adsorption process, i.e. sorption heat pumps. Manufacturers claim that the efficiency could reach 140-160%. The annual efficiency will be lower but it is clear that gas-fired heat pumps can involve an efficiency and technology step equal to the transition from non-condensing gas boilers with atmospheric burners to condensing boilers. This report contains a review of the current sorption gas-fired heat pumps for residential space heating and also the visible development trends. A prototype heat pump has been laboratory tested. Field test results from Germany and the Netherlands are also used for a technology evaluation. The tested heat pump unit combines a small heat pump and a supplementary condensing gas boiler. Field tests show an average annual efficiency of 120% for this prototype design. The manufacturer abandoned the tested design during the project period and the current development concentrates on a heat pump design only comprising the heat pump, although larger. The heat pump development at three manufacturers in Germany indicates a commercial stage around 2010-2011. A fairly high electricity consumption compared to traditional condensing boilers was observed in the tested heat pump. Based on current prices for natural gas and electricity the cost savings were estimated to 12% and 27% for heat pumps with 120% and 150% annual efficiency respectively. There is currently no widespread performance testing procedure useful for annual efficiency calculations of gas-fired heat pumps. The situation seems to be clearer for electric compression heat pumps regarding proposed testing and calculation procedures. A German environmental label exists and gasfired sorption heat pumps are also slightly treated in the Eco-design work

  3. Advanced Materials Development Program: Ceramic Technology for Advanced Heat Engines program plan, 1983--1993

    1990-07-01

    The purpose of the Ceramic Technology for Advanced Heat Engines (CTAHE) Project is the development of an industrial technology base capable of providing reliable and cost-effective high temperature ceramic components for application in advanced heat engines. There is a deliberate emphasis on industrial'' in the purpose statement. The project is intended to support the US ceramic and engine industries by providing the needed ceramic materials technology. The heat engine programs have goals of component development and proof-of-concept. The CTAHE Project is aimed at developing generic basic ceramic technology and does not involve specific engine designs and components. The materials research and development efforts in the CTAHE Project are focused on the needs and general requirements of the advanced gas turbine and low heat rejection diesel engines. The CTAHE Project supports the DOE Office of Transportation Systems' heat engine programs, Advanced Turbine Technology Applications (ATTAP) and Heavy Duty Transport (HDT) by providing the basic technology required for development of reliable and cost-effective ceramic components. The heat engine programs provide the iterative component design, fabrication, and test development logic. 103 refs., 18 figs., 11 tabs.

  4. The effects of heat treatment on physical and technological ...

    STORAGESEVER

    2009-10-19

    Oct 19, 2009 ... ween 450 and 660 m altitudes in Cide-Sehdagi (Gercek et al., 1998; Dogu ... changes continue as the temperature is increased in ... Heat treatment slows water uptake and wood cell wall absorbs ...... The Effect of Boiling Time.

  5. The effects of heat treatment on physical and technological ...

    STORAGESEVER

    2009-10-19

    Oct 19, 2009 ... surface of wood were used to evaluate the effect of heat treatment on the surface characteristics of ... Some of the products developed by thermal treat- .... boards were stored uncontrolled condition in an unheated room for .... These results can be explained with material loses in ...... Finland-state of the art.

  6. Peeling of tomatoes using novel infrared radiation heating technology

    The effectiveness of using infrared (IR) dry-peeling as an alternative process for peeling tomatoes without lye and water was studied. Compared to conventional lye peeling, IR dry-peeling using 30 s to 75 s heating time resulted in lower peeling loss (8.3% - 13.2% vs. 12.9% - 15.8%), thinner thickne...

  7. Feasibility of Jujube peeling using novel infrared radiation heating technology

    Infrared (IR) radiation heating has a promising potential to be used as a sustainable and effective method to eliminate the use of water and chemicals in the jujube-peeling process and enhance the quality of peeled products. The objective of this study was to investigate the feasibility of use IR he...

  8. Development of infrared heating technology for tomato peeling

    The commercial lye and steam peeling methods used in tomato processing industry are water- and energy-intensive and have a negative impact on the environment. To develop alternative peeling methods, we conducted comprehensive studies of using infrared (IR) heating for tomato peeling. The three major...

  9. INTERCARTO CONFERENCES

    Vladimir Tikunov

    2010-01-01

    Full Text Available The InterCarto conferences are thematically organized to target one of the most pressing problems of modern geography—creation and use of geographical information systems (GISs as effective tools for achieving sustainable development of territories. Over the years, from 1994 to 2009, 1872 participants from 51 countries and 156 cities, who made 1494 reports, attended the conferences. There were 1508 participants from 49 regions of Russia making 1340 presentations. The conferences hosted 31 different sections, most popular of which were Environmental GIS-Projects: Development and Experience, Sustainable Development and Innovative Projects, GIS: the Theory and Methodology, Projects for Russia and Regions, and GIS-Technologies and Digital Mapping. The next annual InterCarto-InterGIS conference will take place in December 2011. The Russian component of the conference will be held in the Altay Kray followed by another meeting on Bali, Indonesia

  10. PROCEEDINGS OF THE 2003 NATIONAL OILHEAT RESEARCH ALLIANCE TECHNOLOGY SYMPOSIUM, HELD AT THE 2003 NEW ENGLAND FUEL INSTITUTE CONVENTION AND 30TH NORTH AMERICAN HEATING AND ENERGY EXPOSITION, HYNES CONVENTION CENTER, PRUDENTIAL CENTER, BOSTON, MASSACHUSETTS, JUNE 9 - 10, 2003.

    MCDONALD,R.J.

    2003-06-09

    This meeting is the sixteenth oilheat industry technology meeting held since 1984 and the third since the National Oilheat Research Alliance (NORA) was formed. This year's symposium is a very important part of the effort in technology transfer, which is supported by the Oilheat Research Fuel Flexibility Program under the United States Department of Energy, Distributed Energy and Electricity Reliability Program (DEER). The foremost reason for the conference is to provide a platform for the exchange of information and perspectives among international researchers, engineers, manufacturers, service technicians, and marketers of oil-fired space-conditioning equipment. The conference provides a conduit by which information and ideas can be exchanged to examine present technologies, as well as helping to develop the future course for oil heating advancement. These conferences also serve as a stage for unifying government representatives, researchers, fuel oil marketers, and other members of the oil-heat industry in addressing technology advancements in this important energy use sector. The specific objectives of the conference are to: (1) Identify and evaluate the current state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost effectively, reliably, and safely; (2) Foster cooperative interactions among federal and industrial representatives for the common goal of sustained economic growth and energy security via energy conservation.

  11. Performance evaluation of thermophotovoltaic GaSb cell technology in high temperature waste heat

    Utlu, Z.; Önal, B. S.

    2018-02-01

    In this study, waste heat was evaluated and examined by means of thermophotovoltaic systems with the application of energy production potential GaSb cells. The aim of our study is to examine GaSb cell technology at high temperature waste heat. The evaluation of the waste heat to be used in the system is designed to be used in the electricity, industry and iron and steel industry. Our work is research. Graphic analysis is done with Matlab program. The high temperature waste heat graphs applied on the GaSb cell are in the results section. Our study aims to provide a source for future studies.

  12. Examination of thermophotovoltaic GaSb cell technology in low and medium temperatures waste heat

    Utlu, Z.; Önal, B. S.

    2018-02-01

    In this study, waste heat was evaluated and examined by means of thermophotovoltaic systems with the application of energy production potential GaSb cells. The aim of our study is to examine GaSb cell technology at low and medium temperature waste heat. The evaluation of the waste heat to be used in the system is designed to be used in the electricity, industry and iron and steel industry. Our work is research. Graphic analysis is done with Matlab program. The low and medium temperature waste heat graphs applied on the GaSb cell are in the results section. Our study aims to provide a source for future studies.

  13. New Technology and Experimental Study on Snow-Melting Heated Pavement System in Tunnel Portal

    Jinxing Lai

    2015-01-01

    Full Text Available In recent years, with the rapid growth of economy and sharp rise of motor vehicles in China, the pavement skid resistance in tunnel portals has become increasingly important in cold region. However, the deicing salt, snow removal with machine, and other antiskid measures adopted by highway maintenance division have many limitations. To improve the treatment effect, we proposed a new snow-melting approach employing electric heat tracing, in which heating cables are installed in the structural layer of road. Through the field experiment, laboratory experiment, and numerical investigation, structure type, heating power, and preheating time of the flexible pavement heating system in tunnel portal were systematically analyzed, and advantages of electric heat tracing technology in improving the pavement skid resistance in tunnel portal were also presented. Therefore, such new technology, which offers new snow-melting methods for tunnel portal, bridge, mountainous area, and large longitudinal slope in cold region, has promising prospect for extensive application.

  14. 17. IAEA fusion energy conference. Extended synopses

    1998-01-01

    Book of extended synopses of the papers, accepted by a international programme committee for presentation at the 17th IAEA Fusion Energy Conference in Yokohama, Japan. The subjects covered are magnetic confinement experiments, plasma heating and current drive, ITER EDA, inertial fusion energy, innovative concepts, fusion technology and theory

  15. 17. IAEA fusion energy conference. Extended synopses

    NONE

    1999-12-31

    Book of extended synopses of the papers, accepted by a international programme committee for presentation at the 17th IAEA Fusion Energy Conference in Yokohama, Japan. The subjects covered are magnetic confinement experiments, plasma heating and current drive, ITER EDA, inertial fusion energy, innovative concepts, fusion technology and theory Refs, figs, tabs

  16. Conference summaries

    1988-01-01

    This volume contains conference summaries of the 28. annual conference of the Canadian Nuclear Association, and the 9. annual conference of the Canadian Nuclear Society. Topics of discussion include: power reactors; fuel cycles; nuclear power and public understanding; future trends; applications of nuclear technology; CANDU reactors; operational enhancements; design of small reactors; accident behaviour in fuel channels; fuel storage and waste management; reactor commissioning/decommissioning; nuclear safety experiments and modelling; the next generation reactors; advances in nuclear engineering education in Canada; safety of small reactors; current position and improvements of fuel channels; current issues in nuclear safety; and radiation applications - medical and industrial

  17. Final Technical Report: Intensive Quenching Technology for Heat Treating and Forging Industries

    Aronov, Michael A.

    2005-12-21

    Intensive quenching (IQ) process is an alternative way of hardening (quenching) steel parts through the use of highly agitated water and then still air. It was developed by IQ Technologies, Inc. (IQT) of Akron, Ohio. While conventional quenching is usually performed in environmentally unfriendly oil or water/polymer solutions, the IQ process uses highly agitated environmentally friendly water or low concentration water/mineral salt solutions. The IQ method is characterized by extremely high cooling rates of steel parts. In contrast to conventional quenching, where parts cool down to the quenchant temperature and usually have tensile or neutral residual surface stresses at the end of quenching. The IQ process is interrupted when the part core is still hot and when there are maximum compressive stresses deep into the parts, thereby providing hard, ductile, better wear resistant parts. The project goal was to advance the patented IQ process from feasibility to commercialization in the heat-treating and forging industries to reduce significantly energy consumption and environmental impact, to increase productivity and to enhance economic competitiveness of these industries as well as Steel, Metal Casting and Mining industries. To introduce successfully the IQ technology in the U.S. metal working industry, the project team has completed the following work over the course of this project: A total of 33 manufacturers of steel products provided steel parts for IQ trails. IQT conducted IQ demonstrations for 34 different steel parts. Our customers tested intensively quenched parts in actual field conditions to evaluate the product service life and performance improvement. The data obtained from the field showed the following: Service life (number of holes punched) of cold-work punches (provided by EHT customer and made of S5 shock-resisting steel) was improved by two to eight times. Aluminum extrusion dies provided by GAM and made of hot work H-13 steel outperformed the

  18. Conferences as Learning Communities: Some Early Lessons in Using "Back-Channel" Technologies at an Academic Conference--Distributed Intelligence or Divided Attention?

    Jacobs, N.; McFarlane, A.

    2005-01-01

    Most, if not all, researchers attend conferences as a part of their practice, and yet it is an under-researched activity. Little attention has been paid either to developing a theoretically informed understanding of conference practice as knowledge building, or to assessing the extent to which conferences are successful. This paper addresses these…

  19. Diffusion of renewable heating technologies in households. Experiences from the Norwegian Household Subsidy Programme

    Bjørnstad, Even

    2012-01-01

    A sample of 896 Norwegian households participating in a subsidy programme was surveyed in order to evaluate the success of the programme. The programme subsidised investments in new heating technologies, including heat pumps and pellet stoves. The success of the programme was measured by the degree of overall satisfaction with the investment by the sampled households. Theories on diffusion of innovations and planned behaviour motivate the empirical modelling of the investment satisfaction. The economic return on the investment varied substantially both within and between the two heating technologies, with heat pumps outperforming pellet stoves in this respect. Still, the economic return showed no explanatory power toward the investment satisfaction of the household. Among the economic variables, only the electricity price had any influence on investment satisfaction. Technical quality, indoor climate and heat comfort, and the availability of the supplier of the heating equipment were the most important explanatory variables. - Highlights: ► Investments in heat pumps and pellet stoves were subsidized over a public programme. ► Heat pumps showed a strong economic return, pellet stoves performed much more poorly. ► This difference in economic return does not influence the investment satisfaction. ► Technical quality, indoor climate and heat comfort are important benefits. ► Service availability and electricity price also influence satisfaction.

  20. AMA Conferences 2015. SENSOR 2015. 17th international conference on sensors and measurement technology. IRS{sup 2} 2015. 14th international conference on infrared sensors and systems. Proceedings

    NONE

    2015-07-01

    This meeting paper contains presentations of two conferences: SENSOR 2015 and IRS{sup 2} (= International conference on InfraRed Sensors and systems). The first part of SENSOR 2015 contains the following chapters: (A) SENSOR PRINCIPLES: A.1: Mechanical sensors; A.2: Optical sensors; A.3: Ultrasonic sensors; A.4: Microacoustic sensors; A.5: Magnetic sensors; A.6: Impedance sensors; A.7: Gas sensors; A.8: Flow sensors; A.9: Dimensional measurement; A.10: Temperature and humidity sensors; A.11: Chemosensors; A.12: Biosensors; A.13: Embedded sensors; A.14: Sensor-actuator systems; (B) SENSOR TECHNOLOGY: B.1: Sensor design; B.2: Numerical simulation of sensors; B.3: Sensor materials; B.4: MEMS technology; B.5: Micro-Nano-Integration; B.6: Packaging; B.7: Materials; B.8: Thin films; B.9: Sensor production; B.10: Sensor reliability; B.11: Calibration and testing; B.12: Optical fibre sensors. (C) SENSOR ELECTRONICS AND COMMUNICATION: C.1: Sensor electronics; C.2: Sensor networks; C.3: Wireless sensors; C.4: Sensor communication; C.5: Energy harvesting; C.6: Measuring systems; C.7: Embedded systems; C.8: Self-monitoring and diagnosis; (D) APPLICATIONS: D.1: Medical measuring technology; D.2: Ambient assisted living; D.3: Process measuring technology; D.4: Automotive; D.5: Sensors in energy technology; D.6: Production technology; D.7: Security technology; D.8: Smart home; D.9: Household technology. The second part with the contributions of the IRS{sup 2} 2015 is structured as follows: (E) INFRARED SENSORS: E.1: Photon detectors; E.2: Thermal detectors; E.3: Cooled detectors; E.4: Uncooled detectors; E.5: Sensor modules; E.6: Sensor packaging. (G) INFRARED SYSTEMS AND APPLICATIONS: G.1: Thermal imaging; G.2: Pyrometry / contactless temperature measurement; G.3: Gas analysis; G.4: Spectroscopy; G.5: Motion control and presence detection; G.6: Security and safety monitoring; G.7: Non-destructive testing; F: INFRARED SYSTEM COMPONENTS: F.1: Infrared optics; F.2: Optical

  1. Technology data characterizing water heating in commercial buildings: Application to end-use forecasting

    Sezgen, O.; Koomey, J.G.

    1995-12-01

    Commercial-sector conservation analyses have traditionally focused on lighting and space conditioning because of their relatively-large shares of electricity and fuel consumption in commercial buildings. In this report we focus on water heating, which is one of the neglected end uses in the commercial sector. The share of the water-heating end use in commercial-sector electricity consumption is 3%, which corresponds to 0.3 quadrillion Btu (quads) of primary energy consumption. Water heating accounts for 15% of commercial-sector fuel use, which corresponds to 1.6 quads of primary energy consumption. Although smaller in absolute size than the savings associated with lighting and space conditioning, the potential cost-effective energy savings from water heaters are large enough in percentage terms to warrant closer attention. In addition, water heating is much more important in particular building types than in the commercial sector as a whole. Fuel consumption for water heating is highest in lodging establishments, hospitals, and restaurants (0.27, 0.22, and 0.19 quads, respectively); water heating`s share of fuel consumption for these building types is 35%, 18% and 32%, respectively. At the Lawrence Berkeley National Laboratory, we have developed and refined a base-year data set characterizing water heating technologies in commercial buildings as well as a modeling framework. We present the data and modeling framework in this report. The present commercial floorstock is characterized in terms of water heating requirements and technology saturations. Cost-efficiency data for water heating technologies are also developed. These data are intended to support models used for forecasting energy use of water heating in the commercial sector.

  2. Removal of Persistent Organic Pollutants from a Solid Matrix by Thermal Desorption Technology Using Conventional and Microwave Heating

    Mašín, P.; Hendrych, J.; Kroužek, J.; Kubal, M.; Kochánková, L.; Sobek, Jiří

    2013-01-01

    Roč. 22, č. 7A (2013), s. 2017-2021 ISSN 1018-4619. [International Conference on Environmental Management , Engineering, Planning and Economics (CEMEPE 2011) & SECOTOX Conference /3./. Skiathos Island, 19.06.2011-24.06.2011] Grant - others:GA MŽP(CZ) SP/2f3/133/08 Institutional support: RVO:67985858 Keywords : thermal desorption * microwave heating * remediation * persistent pollutants * pilot scale Subject RIV: CI - Industrial Chemistry, Chemical Engineering Impact factor: 0.527, year: 2013

  3. Design of Remote Heat-Meter System Based on Trusted Technology

    Yu, Changgeng; Lai, Liping

    2018-03-01

    This article presents a proposal of a heat meter and remote meter reading system for the disadvantages of the hackers very easily using eavesdropping, tampering, replay attack of traditional remote meter reading system. The system selects trusted technology such as, the identity authentication, integrity verifying, and data protection. By the experiments, it is proved that the remote meter reading system of the heat meter can be used to verify the feasibility of the technology, and verify the practicability and operability of data protection technology.

  4. Advanced Heat/Mass Exchanger Technology for Geothermal and Solar Renewable Energy Systems

    Greiner, Miles [Univ. of Nevada, Reno, NV (United States); Childress, Amy [Univ. of Nevada, Reno, NV (United States); Hiibel, Sage [Univ. of Nevada, Reno, NV (United States); Kim, Kwang [Univ. of Nevada, Reno, NV (United States); Park, Chanwoo [Univ. of Nevada, Reno, NV (United States); Wirtz, Richard [Univ. of Nevada, Reno, NV (United States)

    2014-12-16

    Northern Nevada has abundant geothermal and solar energy resources, and these renewable energy sources provide an ample opportunity to produce economically viable power. Heat/mass exchangers are essential components to any energy conversion system. Improvements in the heat/mass exchange process will lead to smaller, less costly (more efficient) systems. There is an emerging heat transfer technology, based on micro/nano/molecular-scale surface science that can be applied to heat/mass exchanger design. The objective is to develop and characterize unique coating materials, surface configurations and membranes capable of accommodating a 10-fold increase in heat/mass exchanger performance via phase change processes (boiling, condensation, etc.) and single phase convective heat/mass transfer.

  5. Hydrogen energy technology development conference. From production of hydrogen to application of utilization technologies and metal hydrides, and examples; Suiso energy gijutsu kaihatsu kaigi. Suiso no seizo kara riyo gijutsu kinzoku suisokabutsu no oyo to jirei

    NONE

    1984-02-14

    The hydrogen energy technology development conference was held on February 14 to 17, 1984 in Tokyo. For hydrogen energy systems and production of hydrogen from water, 6 papers were presented for, e.g., the future of hydrogen energy, current state and future of hydrogen production processes, and current state of thermochemical hydrogen technology development. For hydrogen production, 6 papers were presented for, e.g., production of hydrogen from steel mill gas, coal and methanol. For metal hydrides and their applications, 6 papers were presented for, e.g., current state of development of hydrogen-occluding alloy materials, analysis of heat transfer in metal hydride layers modified with an organic compound and its simulation, and development of a large-size hydrogen storage system for industrial purposes. For hydrogen utilization technologies, 8 papers were presented for, e.g., combustion technologies, engines incorporating metal hydrides, safety of metal hydrides, hydrogen embrittlement of system materials, development trends of phosphate type fuel cells, and alkali and other low-temperature type fuel cells. (NEDO)

  6. Diesel Engine Waste Heat Recovery Utilizing Electric Turbocompound Technology

    Gerke, Frank G.

    2001-01-01

    This cooperative program between the DOE Office of Heavy Vehicle Technology and Caterpillar, Inc. is aimed at demonstrating electric turbocompound technology on a Class 8 truck engine. This is a lab demonstration program, with no provision for on-truck testing of the system. The goal is to demonstrate the level of fuel efficiency improvement attainable with the electric turbocompound system. Also, electric turbocompounding adds an additional level of control to the air supply which could be a component in an emissions control strategy

  7. Advanced Energy and Water Recovery Technology from Low Grade Waste Heat

    Dexin Wang

    2011-12-19

    The project has developed a nanoporous membrane based water vapor separation technology that can be used for recovering energy and water from low-temperature industrial waste gas streams with high moisture contents. This kind of exhaust stream is widely present in many industrial processes including the forest products and paper industry, food industry, chemical industry, cement industry, metal industry, and petroleum industry. The technology can recover not only the sensible heat but also high-purity water along with its considerable latent heat. Waste heats from such streams are considered very difficult to recover by conventional technology because of poor heat transfer performance of heat-exchanger type equipment at low temperature and moisture-related corrosion issues. During the one-year Concept Definition stage of the project, the goal was to prove the concept and technology in the laboratory and identify any issues that need to be addressed in future development of this technology. In this project, computational modeling and simulation have been conducted to investigate the performance of a nanoporous material based technology, transport membrane condenser (TMC), for waste heat and water recovery from low grade industrial flue gases. A series of theoretical and computational analyses have provided insight and support in advanced TMC design and experiments. Experimental study revealed condensation and convection through the porous membrane bundle was greatly improved over an impermeable tube bundle, because of the membrane capillary condensation mechanism and the continuous evacuation of the condensate film or droplets through the membrane pores. Convection Nusselt number in flue gas side for the porous membrane tube bundle is 50% to 80% higher than those for the impermeable stainless steel tube bundle. The condensation rates for the porous membrane tube bundle also increase 60% to 80%. Parametric study for the porous membrane tube bundle heat transfer

  8. Manufacture of power station heat exchangers using modern production technology

    Genzlinger, W.; Hoffmann, J.; Ohlhaeuser, K.

    1986-01-01

    Heat exchangers of high quality and operational safety can only be fabricated economically if fabrication is as 'simple' as possible and can be controlled and if, through value analysis, the work flows can be mechanized and automated and the following requirements are met: use of materials that are easy to work with for the application considered, choice of product designs and wall thicknesses that offer favourable conditions for processing and non-destructive testing, placing of seams in such a way that good accessibility for welding and minimum residual welding stresses are assured, minimizing the number of welding seams, use of automatic welding machines for submerged-arc welding and electronically controlled sources of welding current - semi-automatic equipment for spatter-free interfaces (pulse technique), electronically controlled equipment for welding in rollers and pipes and CNC-controlled machining centres for drilling pipe galleries (deep-hole drilling) and baffle plates and for machining the sealing elements after welding. Continuous inspections in each phase of fabrication assures that heat exchangers are made which fully meet the requirements of nuclear power station operators. (orig.)

  9. Gasification technologies for heat and power from biomass

    Beenackers, AACM; Maniatis, K; Kaltschmitt, M; Bridgwater, AV

    1997-01-01

    A critical review is presented of biomass gasifier systems presently commercially available or under development. Advantages and possible problem areas are discussed in relation to particular applications. Both large and small scale technologies are reviewed. Catalysed by the EC JOULE and AIR

  10. Proceedings of the 17th international conference on structural mechanics in reactor technology

    2003-01-01

    The conference was divided into the following divisions and subdivisions: DIVISION A: Plenary lectures and panel; DIVISION B: Computational mechanics (Structural and thermal analysis; High-non linear analysis, material behaviour; Vibration and fluid dynamics analysis); DIVISION C: Fuel and core structures (Fuel vibration and fretting; Fuel design and constitutive modelling; Fuel failure under operation and accident conditions; Fuel failure under operation and accident conditions; Components and material behaviour under irradiation; Integrity of fuel systems under transient conditions); DIVISION D: Aging, Life Extension and Licence Renewal (International Regulatory and Economic Perspectives; Utility perspectives, WWER technology; Fatigue, corrosion and crack issues; Component integrity; Aging assessment and monitoring; Containment and other structures); DIVISION F: Design methods and rules for components (International codes and standards; Tube, piping codes and standards; Analyses; Fatigue and life assessment; Creep; Bolted connections and gaskets); DIVISION G: Fracture mechanics (Reactor pressure vessel integrity; Dynamic loading; Fracture considerations for various applications; Failure assessment of Zr alloy; Pipe integrity; Integrity of welds; Failure of non-metallic materials; Leak before break (LBB); Corrosion aspects); DIVISION H: Concrete Containment and Other Structures (Concrete materials and performance; Tests of scale prestressed concrete containment vessel; Shear wall test and analysis; Structural analysis and containment design; Structural integrity and analysis); DIVISION J: Analysis and design for dynamic and extreme load (Vibration of shells and plates; Impact analysis; Piping vibration; Structural dynamics; Experimental and other topics); DIVISION K: Seismic analysis, design and qualification (General seismic issues; Ground motion and sitting; Soil-structure interaction; Seismic response of structures; Seismic re-evaluation; Seismic response and

  11. ITC18: 18th international Toki conference. Development of physics and technology of stellarators/heliotrons 'en route to DEMO'. Proceedings

    2009-02-01

    18th International Toki Conference (ITC18) was held in Toki (Japan) December 9-12 2008 organized by the National Institute for Fusion Science (NIFS). More than 150 experts in fusion research, especially in stellarator/heliotron research from Australia, Belgium, China, France, Germany, Hungary, India, Iran, Italy, Japan, Korea, Serbia, Spain, Sweden, Switzerland, and the United States of America gathered at the conference. The International Organizing Committee (IOC) chaired by O. Motojima, the International Program Committee (IPC) chaired by Y. Ogawa and the Local Organizing Committee (LOC) chaired by T. Mutoh have played the leading role in the elaboration of the scientific program of the conference. NIFS has organized the ITC as an annual meeting for fusion related sciences since its establishment in 1989. The IPC arranged 2 plenary talks, 1 review talk, 34 invited talks in addition to 109 contributed presentations including 6 oral talks. Recent developments in the experimental, theoretical and technical research show the clear route to the realization of a stellarator/heliotron type demo fusion reactor. ITC18 was devoted to review the recent developments and to discuss the next steps forward to the demo reactor realization of stellarator/heliotron type. In the conference, recent experimental results from both tokamak and stellarator/heliotron devices are reviewed and the experimental and theoretical physics of plasma confinement in toroidal devices are also discussed and confirmed that the physical base of the fusion reactor is well developed. The development of steady state operation, heating, fueling, divertors, plasma wall interaction and wall materials, advanced diagnostics for reactor relevant plasma, blanket materials as well as super conducting magnets are discussed as inevitable key physics and technologies for the DEMO reactor. Slides of all oral presentations as well as the proceedings are available at http://itc.nifs.ac.jp/. Extended papers of major

  12. Technology data for electricity and heat generating plants

    NONE

    2005-03-01

    The Danish Energy Authority and the two Danish electricity transmission and system operators, Elkraft System and Eltra, initiated updating of current technology catalogues in 2003. The first updated catalogue was published in March 2004. This report presents the results of the second phase of updating. The primary objective has been to establish a uniform, commonly accepted and up-to-date basis for energy planning activities, such as future outlooks, evaluations of security of supply and environmental impacts, climate change evaluations, and technical and economic analyses. The catalogue may furthermore be used as reference for evaluations of the development perspectives for the numerous technologies available for energy generation in relation to the programming of funding schemes for research, development and demonstration of emerging technologies. It has finally been the intention to offer the catalogue for the international audience, as a contribution to similar initiates aiming at forming a public and concerted knowledge base for international analyses and negotiations. A guiding principle for developing the catalogue has been to primarily rely on well-documented and public information, secondarily on invited expert advice. Since many experts are reluctant in estimating future quantitative performance data, the data tables are not complete, in the sense that most data tables show several blank spaces. This approach has been chosen in order to achieve data, which to some extent are equivalently reliable, rather than to risk a largely incoherent data set including unfounded guesses. (au)

  13. 20th IAEA fusion energy conference 2004. Conference proceedings

    2005-01-01

    The 20th International Atomic Energy Agency (IAEA) Fusion Energy Conference (FEC) was held in Vilamoura, Portugal, from 1 to 6 November 2004. The Instituto Superior Tecnico through the Centro de Fusao Nuclear on behalf of the Portuguese Government and the Association EURATOM/IST hosted the conference. The IAEA wishes to express its gratitude to the host. More than 600 delegates representing 33 countries and three international organizations attended the Fusion Energy Conference 2004. The Programme Committee accepted a total of some 437 papers for presentation at the conference. The scientific experimental and theoretical papers have been grouped with respect to the following themes: Overview on magnetic and inertial fusion; Advanced Scenarios and Steady State; Edge Localized Modes; Fusion Technology; Transport Theory; Beta Limits; Hybrid Scenarios; H-mode and Transport; ITER; Alfven Modes and Wave Heating; Operational Limits and Momentum Transport; Energetic Particles and Stability; Neoclassical Tearing Modes; Transport and Turbulence; Inertial Fusion; Configuration Effects and Transport; and Plasma-wall Interaction. The conference adjourned with the announcement of the next IAEA Fusion Energy Conference, which will be held for the first time in the People's Republic of China, in the city of Chengdu, October 16-22, 2006

  14. VII Russian annual conference of young scientists and postgraduate students Physical chemistry and technology of inorganic materials. Collection of materials

    Tsvetkov, Yu.V.

    2010-01-01

    The materials of the VII Russian annual conference of young scientists and postgraduate students Physical chemistry and technology of inorganic materials, held 8-11 November 2010 in Moscow, are presented. Structure and properties of high-strength nanostructured metal and composite materials, development of research methods and simulation of the structure and properties of materials and nanomaterials, functional ceramic and composite nanomaterials - in sight of the participants. The problems of physicochemical principles and processes for new technologies and forming powder materials and nanomaterials, physicochemical bases of production and processing of advanced inorganic materials, physical chemistry and technology of energy-, resource-saving and environmentally friendly processes for ferrous, non-ferrous and rare metals are under consideration. Promising composite coatings and nanostructured films of functional purposes, physicochemical bases of new processes of shaping and forming of materials and nanomaterials are discussed [ru

  15. Geothermal heat pumps, a booming technology in North America; Geothermal Heat Pumps - der Boom der oberflaechennahen Geothermie in Nordamerika

    Sanner, B [Giessen Univ. (Germany). Inst. fuer Angewandte Geowissenschaften

    1997-12-01

    Over the last years, the interest in and the use of ground-source heat pumps has substantially increased in North America. In a market dominated by space cooling heat pumps can show clearly their advantages. This paper describes the development in Canada and USA, gives examples of the technologies used and presents some large plants. The differences to the Central European situation are discussed. Also mentioned are the various activities in market penetration, which peaked in the foundation of the `Geothermal Heat Pump Consortium` in Washington in 1994. (orig.) [Deutsch] In den letzten Jahren hat das Interesse an und der Einsatz von erdgekoppelten Waermepumpen in Nordamerika stark zugenommen. In einem von der Raumkuehlung dominierten Markt koennen Waermepumpen ihre Vorteile voll ausspielen. Der Beitrag beschreibt die Entwicklung in Kanada und den USA, stellt Beispiele der eingesetzten Technik vor und geht auf einige Grossanlagen ein. Ausserdem werden die Unterschiede zu der Situation in Mitteleuropa herausgearbeitet und die verschiedenen Aktivitaeten zu `Markt Penetration` behandelt, die 1994 in die Gruendung des `Geothermal Heat Pump Consortiums` in Washington muendeten. (orig.)

  16. HEATING OF BLANK IN FORM OF PRISM IN ACCORDANCE WITH TECHNOLOGICAL LIMITATIONS

    V. B. Kovalevsky

    2009-01-01

    Full Text Available The paper considers a problem on optimum heating control of a blank in the form of prism under complicated conditions of heat-transfer in accordance with criteria of gas consumption minimization, decarburized layer and scaling. Numerical algorithm of the problem solution and examples are given in the paper. A new technology of the flame furnace operation has been developed in the paper. 

  17. Proceedings of second international conference on vibration engineering and technology of machinery

    2002-12-01

    This volume of proceedings of the conference on vibration engineering cover a wide range of fields spanning diagnostics and condition monitoring, dynamics of rotors, dynamics of structures, computational methods, vehicle dynamics, vibration control, fluid-structure interaction, random and non-linear vibration. Many of these topics are also important to nuclear industry. The papers relevant to INIS are indexed separately

  18. European Power Electronic conference in Aalborg, Denmark - 1000 participants discussing the future energy technologies

    Blaabjerg, Frede; Munk-Nielsen, Stig

    2007-01-01

    The European Power Electronics and Adjustable Speed Drives conference with technical sponsorship of IEEE Industrial Electronic Society has been held in Aalborg, Denmark, during the first days of September 2007 with an overwhelming success and participation. It was hosted by Aalborg University's I...

  19. Nuclear Future is Ten Years Old. Innovative Nuclear Technology Celebrates Anniversary at General Conference

    Verlini, Giovanni

    2011-01-01

    IAEA-led International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) marked today its tenth anniversary with a ceremony held on the opening day of the IAEA's annual General Conference. INPRO was established in 2000 to ensure that sustainable nuclear energy is available to meet the energy needs of the twenty-first century.

  20. Twenty-ninth ORNL/DOE conference on analytical chemistry in energy technology. Abstracts of papers

    1986-01-01

    This booklet contains separate abstracts of 55 individual papers presented at this conference. Different sections in the book are titled as follows: laser techniques; resonance ionization spectroscopy; laser applications; new developments in mass spectrometry; analytical chemistry of hazardous waste; and automation and data management

  1. Nuclear technology: the role of the IAEA. Ninth international conference on emerging nuclear energy systems, Tel Aviv, 28 June 1998

    ElBaradei, M.

    1998-01-01

    The document reproduces the text of the conference given by the Director General of the IAEA at the Ninth International Conference on Emerging Nuclear Energy Systems, in Tel Aviv, Israel, on 28 June 1998. The Director General outlines the role of the IAEA in assisting its Member States to meet the challenges facing the use of nuclear energy, based on the Agency' mandate on the following inter-related tasks: ta act as a catalyst for the scientific community and as a hub for state-of-the-art technology; to act as a centre for the transfer of nuclear technologies so as to ensure their accessibility to member State in general, and to developing countries in particular; to assist Member States to make informed and appropriate choices concerning the energy mix by producing comparative assessments of nuclear and other technologies; to strive for the highest level of safety in all areas of the use of nuclear energy; and to assure, through its verification system, the pledges to use nuclear energy exclusively for peaceful purposes are fulfilled

  2. The NASA-Lewis/ERDA Solar Heating and Cooling Technology Program

    Couch, J. P.; Bloomfield, H. S.

    1975-01-01

    The NASA Lewis Research Center plans to carry out a major role in the ERDA Solar Heating and Cooling Program. This role would be to create and test the enabling technology for future solar heating, cooling, and combined heating/cooling systems. The major objectives of the project are to achieve reduction in solar energy system costs, while maintaining adequate performance, reliability, life, and maintenance characteristics. The project approach is to move progressively through component, subsystem, and then system technology advancement phases in parallel with continuing manufacturing cost assessment studies. This approach will be accomplished principally by contract with industry to develop advanced components and subsystems. This advanced hardware will be tested to establish 'technology readiness' both under controlled laboratory conditions and under real sun conditions.

  3. 10. international conference on innovation and technological development; 10. congreso internacional sobre innovacion y desarrollo tecnologico (CIINDET 2013)

    NONE

    2013-03-15

    The conference held in the city of Cuernavaca, Morelos, Mexico, from March 13 to 15, 2013 presented several papers related to the areas of mechanical engineering, electrical engineering, control systems, computer systems, electronics and instrumentation and alternate energies, with a focus on innovation and technology development [Spanish] En este congreso celebrado en la ciudad de Cuernavaca, Morelos, Mexico, del 13 al 15 de marzo de 2013, se presentan diversas ponencias relacionadas con las areas de ingenieria mecanica, ingenieria electrica, sistemas de control, sistemas computacionales, electronica e instrumentacion y energias alternas, con un enfoque hacia la innovacion y el desarrollo tecnologico.

  4. 8. international conference on innovation and technological development; 8. congreso internacional sobre innovacion y desarrollo tecnologico (CIINDET 2010)

    NONE

    2010-11-15

    In this conference in the city of Cuernavaca, Morelos, Mexico, from 24 to 26 November 2010, there are several papers related to the areas of mechanical engineering, electrical engineering, control systems, computer systems, electronics and instrumentation and energies alternating with a focus on innovation and technological development. [Spanish] En este congreso celebrado en la ciudad de Cuernavaca, Morelos, Mexico, del 24 al 26 de noviembre de 2010, se presentan diversas ponencias relacionadas con las areas de ingenieria mecanica, ingenieria electrica, sistemas de control, sistemas computacionales, electronica e instrumentacion y energias alternas con un enfoque hacia la innovacion y el desarrollo tecnologico.

  5. Proceedings of the 2. MIT international conference on the next generation of nuclear power technology. Final report

    NONE

    1993-12-31

    The goal of the conference was to try to attract a variety of points of view from well-informed people to debate issues concerning nuclear power. Hopefully from that process a better understanding of what one should be doing will emerge. In organizing the conference lessons learned from the previous one were applied. A continuous effort was made to see to it that the arguments for the alternatives to nuclear power were given abundant time for presentation. This is ultimately because nuclear power is going to have to compete with all of the energy technologies. Thus, in discussing energy strategy all of the alternatives must be considered in a reasonable fashion. The structure the conference used has seven sessions. The first six led up to the final session which was concerned with what the future nuclear power strategy should be. Each session focused upon a question concerning the future. None of these questions has a unique correct answer. Rather, topics are addressed where reasonable people can disagree. In order to state some of the important arguments for each session`s question, the combination of a keynote paper followed by a respondent was used. The respondent`s paper is not necessarily included to be a rebuttal to the keynote; but rather, it was recognized that two people will look at a complex question with different shadings. Through those two papers the intention was to get out the most important arguments affecting the question for the session. The purpose of the papers was to set the stage for about an hour of discussion. The real product of this conference was that discussion.

  6. Technology and automation of atomic power engineering and industry. TAAPEI-2009. Materials of branch scientific and technical conference covers the fiftieth anniversary of the Seversk State Engineering Academy

    2009-01-01

    Materials of the branch scientific and technical conference Technology and automation of atomic power engineering and industry (18-22 May, 2009, Seversk) are performed. Scientific and practical results of investigations into chemical technological developments, creation of machinery and apparatuses, automation of technological processes, application of present-day information technologies in atomic industry as well as ecological and nuclear weapons proliferation problems are shown. Besides issues of professional education and social-economic problems of the atomic branch are considered [ru

  7. Spray cooling heat transfer: Technology overview and assessment of future challenges for micro-gravity application

    Silk, Eric A.; Golliher, Eric L.; Paneer Selvam, R.

    2008-01-01

    Advanced on-board flight systems for future NASA space exploration programs consist of components such as laser-diode arrays (LDA's) and multi-chip modules (MCM's). Thermal management of these systems require high heat flux cooling capability (≥100 W/cm 2 ), tight temperature control (approx. ±2 deg. C), reliable start-up (on demand) and long term stability. Traditional multiphase thermal control technologies for space flight (e.g., loop heat pipes, capillary pumped loops, etc.) satisfy the temperature control, start-up and stability requirements, but their heat flux removal capabilities are limited. Spray cooling can provide high heat fluxes in excess of 100 W/cm 2 using fluorinerts and over 1000 W/cm 2 with water while allowing tight temperature control at low coolant fluid flow rates. Spray cooling has been flight proven in an open loop configuration through the Space shuttle's flash evaporator system (FES). However, several closed system issues require investigation to further advance the technology to a technology readiness level (TRL) appropriate for closed system space flight application. This paper provides a discussion of the current status of spray cooling technology as well as NASA's goals, current direction, and challenges associated with the implementation and practice of this technology in the micro-gravity environment

  8. Technology Development Roadmap for the Advanced High Temperature Reactor Secondary Heat Exchanger

    P. Sabharwall; M. McCllar; A. Siahpush; D. Clark; M. Patterson; J. Collins

    2012-09-01

    This Technology Development Roadmap (TDRM) presents the path forward for deploying large-scale molten salt secondary heat exchangers (MS-SHX) and recognizing the benefits of using molten salt as the heat transport medium for advanced high temperature reactors (AHTR). This TDRM will aid in the development and selection of the required heat exchanger for: power production (the first anticipated process heat application), hydrogen production, steam methane reforming, methanol to gasoline production, or ammonia production. This TDRM (a) establishes the current state of molten salt SHX technology readiness, (b) defines a path forward that systematically and effectively tests this technology to overcome areas of uncertainty, (c) demonstrates the achievement of an appropriate level of maturity prior to construction and plant operation, and (d) identifies issues and prioritizes future work for maturing the state of SHX technology. This study discusses the results of a preliminary design analysis of the SHX and explains the evaluation and selection methodology. An important engineering challenge will be to prevent the molten salt from freezing during normal and off-normal operations because of its high melting temperature (390°C for KF ZrF4). The efficient transfer of energy for industrial applications depends on the ability to incorporate cost-effective heat exchangers between the nuclear heat transport system and industrial process heat transport system. The need for efficiency, compactness, and safety challenge the capabilities of existing heat exchanger technology. The description of potential heat exchanger configurations or designs (such as printed circuit, spiral or helical coiled, ceramic, plate and fin, and plate type) were covered in an earlier report (Sabharwall et al. 2011). Significant future work, much of which is suggested in this report, is needed before the benefits and full potential of the AHTR can be realized. The execution of this TDRM will focuses

  9. Proceedings of the 2002 Petroleum Society of CIM/SPE/CHOA International Thermal Operations and Heavy Oil Symposium, International Conference on Horizontal Well Technology, and Canadian Heavy Oil Association Business Conference : Resources 2 Reserves 2 Results. CD ROM ed.

    NONE

    2002-07-01

    This three day conference combined the Petroleum Society's International Horizontal Well and Technology Conference, the Society of Petroleum Engineer's (SPE) International Thermal Operations and Heavy Oil Symposium, and the Canadian Heavy Oil Association's (CHOA) Annual Business Meeting. The 87 presentations covered all aspects of heavy oil, thermal, and horizontal well technology from geosciences and drilling to economics and environment. The themes included financing, turning projects into results, eliminating the downstream barriers to oil sand development in North America and the world, and emerging technologies for horizontal or heavy oil applications. The conference included the following 20 sessions: (1) thermal operations/engineering, (2) well testing/productivity of horizontal wells, (3) heavy oil operations, (4) environmental aspects of heavy oil projects, (5) upgrading/pipelines, (6) economics and project appraisal, (7) simulation studies of thermal projects, (8) multilaterals, (9) horizontal wells in conventional reservoirs, (10) cold production of heavy oil, (11) horizontal drilling in thermal projects, (12) simulation studies of horizontal wells, (13) horizontal drilling technology, (14) thermal field studies and horizontal wells in heavy oil, (15) completion/production technology of horizontal and thermal wells, (16) physics and PVT of heavy oil recovery processes, (17) reservoir characterization/geosciences, (18) horizontal injectors/produced water technology, (19) emerging technologies, and (20) reservoir geomechanics/fracturing. Tutorials were also organized to provide opportunity to review areas that have undergone major changes. A total of 73 papers were indexed separately for inclusion in the database. refs., tabs., figs.

  10. Homeland Security Affairs Journal, Supplement - 2012: IEEE 2011 Conference on Technology for Homeland Security: Best Papers

    2012-01-01

    Homeland Security Affairs is the peer-reviewed online journal of the Naval Postgraduate School Center for Homeland Defense and Security (CHDS), providing a forum to propose and debate strategies, policies, and organizational arrangements to strengthen U.S. homeland security. The instructors, participants, alumni, and partners of CHDS represent the leading subject matter experts and practitioners in the field of homeland security. IEEE Supplement 2012. Supplement: IEEE 2011 Conference on Te...

  11. Transactions of the 9th international conference on structural mechanics in reactor technology. Vol. B

    Wittmann, F.H.

    1987-01-01

    The area to be covered by Division B of SMIRT-Conferences can be briefly summarized as follows: Computational methods for static and dynamic analysis of solids and structures in linear and non-linear regimes: Finite elements, boundary elements, finite differences and other numerical techniques. Methods and software for computer-aided engineering including data bases, computer graphics and expert systems. Seventy eight papers have been separately indexed for the database (orig./GL)

  12. Technology across the Curriculum. Proceedings of the Annual Conference of the Texas Computer Education Association (8th, Dallas, Texas, February 24-27, 1988).

    Texas Computer Education Association, Lubbock.

    The theme of this computer education conference was "Technology across the Curriculum." These proceedings include papers on the application of educational technologies in school administration, business education, computer science education, mathematics, science, social studies, English and language arts, elementary education, gifted and…

  13. PREFACE: International Conference on Advancement in Science and Technology 2012 (iCAST): Contemporary Mathematics, Mathematical Physics and their Applications

    Ganikhodjaev, Nasir; Mukhamedov, Farrukh; Hee, Pah Chin

    2013-04-01

    The 4th International Conference on the Advancement of Science and Technology 2012 (iCAST 2012), with theme 'Contemporary Mathematics, Mathematical Physics and their Applications', took place in Kuantan, Malaysia, from Wednesday 7 to Friday 9 November 2012. The conference was attended by more than 100 participants, and hosted about 160 oral and poster papers by more than 140 pre-registered authors. The key topics of the 4th iCAST 2012 include Pure Mathematics, Applied Mathematics, Theoretical/Mathematical Physics, Dynamical Systems, Statistics and Financial Mathematics. The scientific program was rather full since after the Keynote and Invited Talks in the morning, four parallel sessions ran every day. However, according to all attendees, the program was excellent with a high level of talks and the scientific environment was fruitful; thus all attendees had a creative time. The conference aimed to promote the knowledge and development of high-quality research in mathematical fields concerned with the application of other scientific fields as well as modern technological trends in physics, chemistry, biology, medicine, economics, sociology and environmental sciences. We would like to thank the Keynote and the Invited Speakers for their significant contributions to 4th iCAST 2012. We would also like to thank the members of the International Scientific Committee and the members of the Organizing Committee. We cannot end without expressing our many thanks to International Islamic University Malaysia and our sponsors for their financial support . This volume presents selected papers which have been peer-reviewed. The editors hope that it may be useful and fruitful for scholars, researchers, and advanced technical members of the industrial laboratory facilities for developing new tools and products. Guest Editors Nasir Ganikhodjaev, Farrukh Mukhamedov and Pah Chin Hee The PDF contains the committee lists, board list and biographies of the plenary speakers.

  14. Investigations of heat-hydraulic noises in the equipment for creation of power-saving technologies

    Proskuryakov, K.N.

    2000-01-01

    The results of experimental and theoretical studies on the parameters of vibroacoustic signals, originating in the TPP and NPP thermal energy equipment, are presented. The methods for calculation and identification of the heat-hydraulic perturbation sources, intended for improving the means of early diagnostics of anomalies in the technological process, forecasting their development, increasing the maintenance work efficiency and operational safety, as well as for creating power-saving technologies in the power engineering, are developed [ru

  15. International Conference on Fast Reactors and Related Fuel Cycles: Safe Technologies and Sustainable Scenarios (FR13). Presentations

    2013-01-01

    The conference, which was held from 4 to 7 of March 2013 in Paris, provided a forum to exchange information on national and international programmes, and more generally new developments and experience, in the field of fast reactors and related fuel cycle technologies. A first goal was to identify and discuss strategic and technical options that have been proposed by individual countries or companies. Another goal was to promote the development of fast reactors and related fuel cycle technologies in a safe, proliferation resistant and economic way. A third goal was to identify gaps and key issues that need to be addressed in relation to the industrial deployment of fast reactors with a closed fuel cycle. A fourth goal was to engage young scientists and engineers in this field, in particular with sustainability, innovation, simulation, safety, economics and public acceptance

  16. Conference summaries

    1983-01-01

    The papers presented at this conference cover the fields of thermalhydraulics, nuclear plant design and operation, licensing, decontamination, restoration and dismantling of nuclear power facilities, services to the nuclear industry, new applications of nuclear technology, reactor physics and fuel cycles, accelerator-breeders, fusion research and lasers

  17. Technology line and case analysis of heat metering and energy efficiency retrofit of existing residential buildings in Northern heating areas of China

    Zhao Jing; Zhu Neng; Wu Yong

    2009-01-01

    The building area in northern heating areas accounting for 70% of the total land area in China is 6,500,000,000 m 2 . The average heating energy consumption in northern China is 100-200% times more than developed countries in the same latitude. This paper introduced firstly the heat metering and energy efficiency retrofit background of existing residential buildings in northern heating areas of China organized by mohurd and MOF, and then put forward the total principle and contents of retrofit. Through analyzing some retrofit cases in Germany, Poland and China, some technological experiences were summarized and finally a technology line suitable for heat metering and energy efficiency retrofit of existing residential buildings in northern heating areas of China which involved retrofit for heat metering and temperature regulation of heating systems, heat balance of heat source and network, and building envelope was described to provide a systematic, scientific, technological guide for the retrofit projects of 0.15 billion m 2 in 'the Eleventh Five-Year Plan' period.

  18. Activities of the All-Union Institute for Heat Technology in suppression of nitrogen oxide emission by technological methods

    Enyakin, Yu.P.; Kotler, V.R.; Babii, V.I.; Shtal' man, S.G.; Shcherbachenko, S.I. (Vsesoyuznyi Teplotekhnicheskii Institut (USSR))

    1991-06-01

    Evaluates research programs of the All-Union Institute for Heat Technology in the USSR from 1970 to 1991. Research and development programs, developed technologies or equipment types, their tests and use on a commercial scale are discussed. Power plants in the USSR which use the technologies are listed. The following technologies are comparatively evaluated: recirculation of flue gases to a combustion system (reduces emission of nitrogen oxides by about 2 times), two-stage coal combustion (reduces emission by 40-50%), three-stage combustion (reduces emission by 40-50%), use of special types of burners (reduces emission by 25-30%), adapting temperature of air supplied to the combustion zone (reduces emission by 20-30%). 10 refs.

  19. Conference Proceedings of RADTECH ASIA '99. Radiation Curing: the technology for the next millenium

    1999-01-01

    Radiation curing (i.e. ultraviolet radiation, electron beams, etc) technology were discussed. All aspects of this technology included equipment , applications, chemistry, performance characterization and measurement, market and economic, new breakthrough were discussed and presented in details

  20. Conference Proceedings of RADTECH ASIA '99. Radiation Curing: the technology for the next millenium

    NONE

    1999-07-01

    Radiation curing (i.e. ultraviolet radiation, electron beams, etc) technology were discussed. All aspects of this technology included equipment , applications, chemistry, performance characterization and measurement, market and economic, new breakthrough were discussed and presented in details.

  1. Development of a micro-heat exchanger with stacked plates using LTCC technology

    E. Vásquez-Alvarez

    2010-09-01

    Full Text Available A green ceramic tape micro-heat exchanger was developed using Low Temperature Co-fired Ceramics technology (LTCC. The device was designed by using Computational Aided Design software and simulations were made using a Computational Fluid Dynamics package (COMSOL Multiphysics to evaluate the homogeneity of fluid distribution in the microchannels. Four geometries were proposed and simulated in two and three dimensions to show that geometric details directly affect the distribution of velocity in the micro-heat exchanger channels. The simulation results were quite useful for the design of the microfluidic device. The micro-heat exchanger was then constructed using the LTCC technology and is composed of five thermal exchange plates in cross-flow arrangement and two connecting plates, with all plates stacked to form a device with external dimensions of 26 x 26 x 6 mm³.

  2. Overview of ground coupled heat pump research and technology transfer activities

    Baxter, V. D.; Mei, V. C.

    Highlights of DOE-sponsored ground coupled heat pump (GCHP) research at Oak Ridge National Laboratory (ORNL) are presented. ORNL, in cooperation with Niagara Mohawk Power Company, Climate Master, Inc., and Brookhaven National Laboratory developed and demonstrated an advanced GCHP design concept with shorter ground coils that can reduce installed costs for northern climates. In these areas it can also enhance the competitiveness of GCHP systems versus air-source heat pumps by lowering their payback from 6 to 7 years to 3 to 5 years. Ground coil heat exchanger models (based primarily on first principles) have been developed and used by others to generate less conservative ground coil sizing methods. An aggressive technology transfer initiative was undertaken to publicize results of this research and make it available to the industry. Included in this effort were an international workshop, trade press releases and articles, and participation in a live teleconference on GCHP technology.

  3. New developments in illumination, heating and cooling technologies for energy-efficient buildings

    Han, H.J.; Jeon, Y.I.; Lim, S.H.; Kim, W.W.; Chen, K.

    2010-01-01

    This paper gives a concise review of new designs and developments of illumination, heating and air-conditioning systems and technologies for energy-efficient buildings. Important breakthroughs in these areas include high-efficiency and/or reduced cost solar system components, LED lamps, smart windows, computer-controlled illumination systems, compact combined heat-power generation systems, and so on. To take advantage of these new technologies, hybrid or cascade energy systems have been proposed and/or investigated. A survey of innovative architectural and building envelope designs that have the potential to considerably reduce the illumination and heating and cooling costs for office buildings and residential houses is also included in the review. In addition, new designs and ideas that can be easily implemented to improve the energy efficiency and/or reduce greenhouse gas emissions and environmental impacts of new or existing buildings are proposed and discussed.

  4. Fuel-efficiency of hydrogen and heat storage technologies for integration of fluctuating renewable energy sources

    Mathiesen, Brian Vad; Lund, Henrik

    2005-01-01

    This paper presents the methodology and results of analysing the use of different energy storage technologies in the task of integration of fluctuating renewable energy sources (RES) into the electricity supply. The analysis is done on the complete electricity system including renewable energy...... sources as well as power plants and CHP (Combined heat and power production). Emphasis is put on the need for ancillary services. Devices to store electricity as well as devices to store heat can be used to help the integration of fluctuating sources. Electricity storage technologies can be used...... to relocate electricity production directly from the sources, while heat storage devices can be used to relocate the electricity production from CHP plants and hereby improve the ability to integrate RES. The analyses are done by advanced computer modelling and the results are given as diagrams showing...

  5. A Joule-Heated Melter Technology For The Treatment And Immobilization Of Low-Activity Waste

    Kelly, S.E.

    2011-01-01

    This report is one of four reports written to provide background information regarding immobilization technologies remaining under consideration for supplemental immobilization of Hanford's low-activity waste. This paper provides the reader a general understanding of joule-heated ceramic lined melters and their application to Hanford's low-activity waste.

  6. A JOULE-HEATED MELTER TECHNOLOGY FOR THE TREATMENT AND IMMOBILIZATION OF LOW-ACTIVITY WASTE

    KELLY SE

    2011-04-07

    This report is one of four reports written to provide background information regarding immobilization technologies remaining under consideration for supplemental immobilization of Hanford's low-activity waste. This paper provides the reader a general understanding of joule-heated ceramic lined melters and their application to Hanford's low-activity waste.

  7. Proceedings of the Conference on Industry Partnerships to Deploy Environmental Technology

    None

    1996-01-01

    Three goals were accomplished at the meeting: review of the latest environmental and waste-management technologies being developed under FETC sponsorship; addressing the accomplishments in, and barriers affecting, private-sector development of these technologies; and laying the groundwork for future technology development initiatives and opportunities.

  8. Apple snack enriched with L-arginine using vacuum impregnation/ohmic heating technology.

    Moreno, Jorge; Echeverria, Julian; Silva, Andrea; Escudero, Andrea; Petzold, Guillermo; Mella, Karla; Escudero, Carlos

    2017-07-01

    Modern life has created a high demand for functional food, and in this context, emerging technologies such as vacuum impregnation and ohmic heating have been applied to generate functional foods. The aim of this research was to enrich the content of the semi-essential amino acid L-arginine in apple cubes using vacuum impregnation, conventional heating, and ohmic heating. Additionally, combined vacuum impregnation/conventional heating and vacuum impregnation/ohmic heating treatments were evaluated. The above treatments were applied at 30, 40 and 50  ℃ and combined with air-drying at 40 ℃ in order to obtain an apple snack rich in L-arginine. Both the impregnation kinetics of L-arginine and sample color were evaluated. The impregnated samples created using vacuum impregnation/ohmic heating at 50 ℃ presented a high content of L-arginine, an effect attributed primarily to electropermeabilization. Overall, vacuum impregnation/ohmic heating treatment at 50 ℃, followed by drying at 40 ℃, was the best process for obtaining an apple snack rich in L-arginine.

  9. Application of heat pipe technology in permanent mold casting of nonferrous alloys

    Elalem, Kaled

    The issue of mold cooling is one, which presents a foundry with a dilemma. On the one hand; the use of air for cooling is safe and practical, however, it is not very effective and high cost. On the other hand, water-cooling can be very effective but it raises serious concerns about safety, especially with a metal such as magnesium. An alternative option that is being developed at McGill University uses heat pipe technology to carry out the cooling. The experimental program consisted of designing a permanent mold to produce AZ91E magnesium alloy and A356 aluminum alloy castings with shrinkage defects. Heat pipes were then used to reduce these defects. The heat pipes used in this work are novel and are patent pending. They are referred to as McGill Heat Pipes. Computer modeling was used extensively in designing the mold and the heat pipes. Final designs for the mold and the heat pipes were chosen based on the modeling results. Laboratory tests of the heat pipe were performed before conducting the actual experimental plan. The laboratory testing results verified the excellent performance of the heat pipes as anticipated by the model. An industrial mold made of H13 tool steel was constructed to cast nonferrous alloys. The heat pipes were installed and initial testing and actual industrial trials were conducted. This is the first time where a McGill heat pipe was used in an industrial permanent mold casting process for nonferrous alloys. The effects of cooling using heat pipes on AZ91E and A356 were evaluated using computer modeling and experimental trials. Microstructural analyses were conducted to measure the secondary dendrite arm spacing, SDAS, and the grain size to evaluate the cooling effects on the castings. The modeling and the experimental results agreed quite well. The metallurgical differences between AZ91E and A356 were investigated using modeling and experimental results. Selected results from modeling, laboratory and industrial trials are presented. The

  10. Trends in NDE science and technology: proceedings of the fourteenth world conference on NDT. V. 1

    Krishnadas Nair, C.G.; Baldev Raj; Murthy, C.R.L.; Jayakumar, T.

    1996-01-01

    The multi volume proceedings of the 14th World Conference on Nondestructive Testing (NDT) cover the applications of Nondestructive Evaluation (NDE) in a wide range of industries, viz. aerospace, chemical, defence, manufacturing, nuclear etc. and for different materials. The major topics covered under it are NDE in nuclear industry, NDE of tubes and bars, non destructive evaluation of composites, NDE of concrete, non destructive evaluation of stresses, NDE of defects, condition monitoring, vibration monitoring, life prediction and NDE for medical applications. Papers relevant to INIS from this volume are indexed separately

  11. Trends in NDE science and technology: proceedings of the fourteenth world conference on NDT. V. 3

    Krishnadas Nair, C.G.; Baldev Raj; Murthy, C.R.L.; Jayakumar, T.

    1996-01-01

    The multi volume proceedings of the 14th World Conference on Nondestructive Testing (NDT) cover the applications of Non destructive Evaluation (NDE) in a wide range of industries, viz. aerospace, chemical, defence, manufacturing, nuclear etc. and for different materials. The major topics covered under it are NDE in nuclear industry, NDE of tubes and bars, non destructive evaluation of composites, NDE of concrete, non destructive evaluation of stresses, NDE of defects, condition monitoring, vibration monitoring, life prediction and NDE for medical applications. Papers relevant to INIS from this volume are indexed separately

  12. Trends in NDE science and technology: proceedings of the fourteenth world conference on NDT. V. 2

    Krishnadas Nair, C.G.; Baldev Raj; Murthy, C.R.L.; Jayakumar, T.

    1996-01-01

    The multi volume proceedings of the 14th World Conference on Nondestructive Testing (NDT) cover the applications of Nondestructive Evaluation (NDE) in a wide range of industries, viz. aerospace, chemical, defence, manufacturing, nuclear etc. and for different materials. The major topics covered under it are NDE in nuclear industry, NDE of tubes and bars, non destructive evaluation of composites, NDE of concrete, non destructive evaluation of stresses, NDE of defects, condition monitoring, vibration monitoring, life prediction and NDE for medical applications. Papers relevant to INIS from this volume are indexed separately

  13. Trends in NDE science and technology: proceedings of the fourteenth world conference on NDT. V. 4

    Krishnadas Nair, C.G.; Baldev Raj; Murthy, C.R.L.; Jayakumar, T.

    1996-01-01

    The multi volume proceedings of the 14th World Conference on Nondestructive Testing (NDT) cover the applications of Nondestructive Evaluation (NDE) in a wide range of industries, viz. aerospace, chemical, defence, manufacturing, nuclear etc. and for different materials. The major topics covered under it are NDE in nuclear industry, NDE of tubes and bars, non destructive evaluation of composites, NDE of concrete, non destructive evaluation of stresses, NDE of defects, condition monitoring, vibration monitoring, life prediction and NDE for medical applications. Papers relevant to INIS from this volume are indexed separately

  14. Trends in NDE science and technology: proceedings of the fourteenth world conference on NDT V. 5

    Krishnadas Nair, C.J.; Baldev Raj; Murthy, C.R.L.; Jayakumar, T.

    1996-01-01

    The multi volume proceedings of the 14th World Conference on Nondestructive Testing (NDT) cover the applications of Nondestructive Evaluation (NDE) in a wide range of industries, viz. aerospace, chemical, defence, manufacturing, nuclear etc. and for different materials. The major topics covered under it are NDE in nuclear industry, NDE of tubes and bars, non destructive evaluation of composites, NDE of concrete, non destructive evaluation of stresses, NDE of defects, condition monitoring, vibration monitoring, life prediction and NDE for medical applications. Papers relevant to INIS from this volume are indexed separately

  15. High temperature heat exchanger application in power engineering and energy-technological processes

    Shpilrain, E.E.

    1986-01-01

    The possibilities for intensification of various processes in metallurgy and chemical technology, the prospects for enhancing power plant efficiency are often linked with temperature increase of reagents, heat carriers and working fluids. In some cases elevated temperatures give the opportunity to use new and principally different technologies, enhance capacities of power production units and technological apparatuses, improve their economical performance. The variety of problems where high temperature heat exchangers are or can be used are extremely wide. It is therefore impossible to overview all of them in one lecture. Therefore the author tries to consider only some examples which are typical and gives an impression of what kind of problems arise in these cases

  16. The third Geneva Conference

    NONE

    1964-12-15

    Full text: On 31 August 1964, the Third United Nations International Conference on the Peaceful Uses of Atomic Energy (more familiarly known as the 'Third Geneva') was opened at the Palais des Nations in Geneva by the Secretary-General of the United Nations, U Thant. It was somewhat narrower in scope than the previous conferences held in 1935 and 1958, the emphasis being on nuclear power and closely related topics; the conference showed that recent progress in this field had provided more than ample material for a major international gathering. All three conferences have been organized by the United Nations, but on this occasion responsibility for the scientific aspects was delegated to IAEA. The UN Scientific Advisory Committee provided advice and guidance on the scientific side. Under the presidency of Professor V. S. Emelyanov (USSR) the conference sat from 31 August to 9 September, to deal with a programme divided into eight general sessions and 36 technical sessions, for which a total of nearly 750 papers were presented. About 1800 delegates and advisers, representing 75 countries as well as UN agencies, attended; in addition there were some 2000 observers. The central theme of the conference was experience in the construction and operation of power reactors and recent advances in power technology, together with forecasts of future developments. Nuclear fuels and reactor materials, health and safety, waste disposal, and economics of nuclear power figured largely. Technical sessions were devoted to such subjects as the technical and economic aspects of the power reactor systems currently in operation or being built, and the main lines of development towards more advanced systems and development of the fast breeder. Parallel lines of development of alternative systems were also considered - some, such as organic reactors, having already been the subject of extensive trials, while others are in the conceptual stage. 'Package' power plants designed for easy

  17. The third Geneva Conference

    1964-01-01

    Full text: On 31 August 1964, the Third United Nations International Conference on the Peaceful Uses of Atomic Energy (more familiarly known as the 'Third Geneva') was opened at the Palais des Nations in Geneva by the Secretary-General of the United Nations, U Thant. It was somewhat narrower in scope than the previous conferences held in 1935 and 1958, the emphasis being on nuclear power and closely related topics; the conference showed that recent progress in this field had provided more than ample material for a major international gathering. All three conferences have been organized by the United Nations, but on this occasion responsibility for the scientific aspects was delegated to IAEA. The UN Scientific Advisory Committee provided advice and guidance on the scientific side. Under the presidency of Professor V. S. Emelyanov (USSR) the conference sat from 31 August to 9 September, to deal with a programme divided into eight general sessions and 36 technical sessions, for which a total of nearly 750 papers were presented. About 1800 delegates and advisers, representing 75 countries as well as UN agencies, attended; in addition there were some 2000 observers. The central theme of the conference was experience in the construction and operation of power reactors and recent advances in power technology, together with forecasts of future developments. Nuclear fuels and reactor materials, health and safety, waste disposal, and economics of nuclear power figured largely. Technical sessions were devoted to such subjects as the technical and economic aspects of the power reactor systems currently in operation or being built, and the main lines of development towards more advanced systems and development of the fast breeder. Parallel lines of development of alternative systems were also considered - some, such as organic reactors, having already been the subject of extensive trials, while others are in the conceptual stage. 'Package' power plants designed for easy

  18. Leveraging gigawatt potentials by smart heat-pump technologies using ionic liquids.

    Wasserscheid, Peter; Seiler, Matthias

    2011-04-18

    One of the greatest challenges to science in the 21 st century is the development of efficient energy production, storage, and transformation systems with minimal ecological footprints. Due to the lack of efficient heat-transformation technologies, industries around the world currently waste energy in the gigawatt range at low temperatures (40-80 °C). These energy potentials can be unlocked or used more efficiently through a new generation of smart heat pumps operating with novel ionic liquid (IL)-based working pairs. The new technology is expected to allow revolutionary technical progress in heat-transformation devices, for example, significantly higher potential efficiencies, lower specific investments, and broader possibilities to incorporate waste energy from renewable sources. Furthermore, due to drastically reduced corrosion rates and excellent thermal stabilities of the new, IL-based working pairs, the high driving temperatures necessary for multi-effect cycles such as double- or triple-effect absorption chillers, can also be realized. The details of this novel and innovative heat-transformation technology are described. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Experimental Investigation of Concrete Runway Snow Melting Utilizing Heat Pipe Technology.

    Chen, Fengchen; Su, Xin; Ye, Qing; Fu, Jianfeng

    2018-01-01

    A full scale snow melting system with heat pipe technology is built in this work, which avoids the negative effects on concrete structure and environment caused by traditional deicing chemicals. The snow melting, ice-freezing performance and temperature distribution characteristics of heat pipe concrete runway were discussed by the outdoor experiments. The results show that the temperature of the concrete pavement is greatly improved with the heat pipe system. The environment temperature and embedded depth of heat pipe play a dominant role among the decision variables of the snow melting system. Heat pipe snow melting pavement melts the snow completely and avoids freezing at any time when the environment temperature is below freezing point, which is secure enough for planes take-off and landing. Besides, the exportation and recovery of geothermal energy indicate that this system can run for a long time. This paper will be useful for the design and application of the heat pipe used in the runway snow melting.

  20. Potential of HVAC and solar technologies for hospital retrofit to reduce heating energy consumption

    Pop, Octavian G.; Abrudan, Ancuta C.; Adace, Dan S.; Pocola, Adrian G.; Balan, Mugur C.

    2018-02-01

    The study presents a combination of several energy efficient technologies together with their potential to reduce the energy consumption and to increase the comfort through the retrofit of a hospital building. The existing situation is characterized by an old and inefficient heating system, by the complete missing of any ventilation and by no cooling. The retrofit proposal includes thermal insulation and a distributed HVAC system consisting of several units that includes air to air heat exchangers and air to air heat pumps. A condensing boiler was also considered for heating. A solar thermal system for preparing domestic hot water and a solar photovoltaic system to assist the HVAC units are also proposed. Heat transfer principles are used for modelling the thermal response of the building to the environmental parameters and thermodynamic principles are used for modelling the behaviour of HVAC, solar thermal system and photovoltaic system. All the components of the heating loads were determined for one year period. The study reveals the capacity of the proposed systems to provide ventilation and thermal comfort with a global reduction of energy consumption of 71.6 %.