Effect of castor oil enrichment layer produced by reaction on the properties of PLA/HDI-g-starch blends.

Science.gov (United States)

Xiong, Zhu; Zhang, Lisheng; Ma, Songqi; Yang, Yong; Zhang, Chuanzhi; Tang, Zhaobin; Zhu, Jin

2013-04-15

Blends of entirely bio-sourced polymers, namely polylactide (PLA) and starch, have been melt-compounded by lab-scale co-extruder with castor oil (CO) as a plasticizer. The enrichment of castor oil on starch had great effect on the properties of the blends. If the castor oil was mainly dispersed in PLA matrix, the properties of the blends were poor, but when the hexamethylenediisocyanate (HDI) was grafted on starch granules the ready reactions between the hydroxyl on CO and the isocyante on the HDI-grafted starch (HGSTs) brought CO molecules enriched on starch particles. DSC analysis shows that the CO layer on starch has a positive effect on the crystallization of PLA in the ternary blend. The accumulation of CO on starch greatly improves the toughness and impact strength of PLA/starch blends. The grafting content of HDI on the starch granules primarily determined the compatibility and properties of the resulted blends. Copyright © 2013 Elsevier Ltd. All rights reserved.

Contact and respiratory sensitizers can be identified by cytokine profiles following inhalation exposure

International Nuclear Information System (INIS)

De Jong, Wim H.; Arts, Josje H.E.; De Klerk, Arja; Schijf, Marcel A.; Ezendam, Janine; Kuper, C. Frieke; Van Loveren, Henk

2009-01-01

There are currently no validated animal models that can identify low molecular weight (LMW) respiratory sensitizers. The Local Lymph Node Assay (LLNA) is a validated animal model developed to detect contact sensitizers using skin exposure, but all LMW respiratory sensitizers tested so far were also positive in this assay. Discrimination between contact and respiratory sensitizers can be achieved by the assessment of cytokine profiles. In a LLNA using the inhalation route, both contact and respiratory sensitizers enhanced proliferation in the draining lymph nodes. The question was if their cytokine profiles were affected by the route of exposure. Male BALB/c mice were exposed head/nose-only during 3 consecutive days to the respiratory sensitizers trimellitic anhydride, phthalic anhydride, toluene diisocyanate, hexamethylene diisocyanate (HDI), and isophorone diisocyanate; the contact sensitizers dinitrochlorobenzene (DNCB), oxazolone (OXA) and formaldehyde (FA), and the irritant methyl salicylate (MS). Three days after the last exposure the draining lymph nodes were excised and cytokine production was measured after ex vivo stimulation with Concanavalin A. Skin application was used as a positive control. After inhalation exposure the respiratory sensitizers induced more interleukin-4 (IL-4) and interleukin (IL-10) compared to the contact sensitizers, whereas the contact sensitizers, except formaldehyde, induced relatively more interferon-γ (IFN-γ) production. When IL-4 and IFN-γ were plotted as a function of the proliferative response, it was shown that IL-4 could be used to identify respiratory sensitizers, except HDI, at concentration levels inducing intermediate stimulation indices. HDI could be distinguished from DNCB and OXA at high SI values. In contrast, contact sensitizers could only be identified when IFN-γ was measured at high stimulation indices. The skin positive control, tested at high concentrations, showed comparable results for IL-4 and IL-10

Relations between a novel, reliable, and rapid index of arterial compliance (PP-HDI) and well-established inidices of arterial blood pressure (ABP) in a sample of hypertensive elderly subjects.

Science.gov (United States)

Bergamini, L; Finelli, M E; Bendini, C; Ferrari, E; Veschi, M; Neviani, F; Manni, B; Pelosi, A; Rioli, G; Neri, M

2009-01-01

Hypertension is a risk factor for a long-lasting arterial wall-remodelling leading to stiffness. The rapid method measuring the pulse pressure (PP) by means of the tool of Hypertension Diagnostic Instruments (HDI) called PP-HDI, overcomes some of the problems arising with more-time consuming methods, like ambulatory blood pressure monitoring (ABPM), and give information about the elasticity of the arterial walls. We studied the relationship between the PP-HDI, the large artery compliance (LA-C) and small artery compliance (SA-C) and few well-established indices of arterial blood pressure (ABP) in a sample of 75 hypertensive subjects, aged 65 years and over. Significant correlations between LA-C and heart rate (HR), PP-ABPM and PP-HDI were found. SA-C relates with HR and systolic blood pressure (SBP) measured in lying and standing positions. Applying a stepwise regression analysis, we found that LA-C variance stems from PP-HDI and HR, while SA-C variance stems from SBP in lying position. Receiver operator characteristic (ROC) curves for thresholds of PP showed that PP-HDI reached levels of sensitivity/specificity similar to PP-ABPM. In conclusion, surveillance of ABP through hemo-dynamic indices, in particular of SBP, is essential, nevertheless the advantage of this control is not known in an elderly population where the organ damage is already evident. PP needs necessarily an instrumental measurement. The PP-HDI result is similar in reliability with respect to PPABPM, but is more rapid and well applicable in an elderly population.

Reliability of CGA/LGA/HDI Package Board/Assembly (Final Report)

Science.gov (United States)

Ghaffaroam. Reza

2014-01-01

Package manufacturers are now offering commercial-off-the-shelf column grid array (COTS CGA) packaging technologies in high-reliability versions. Understanding the process and quality assurance (QA) indicators for reliability are important for low-risk insertion of these advanced electronics packages. The previous reports, released in January of 2012 and January of 2013, presented package test data, assembly information, and reliability evaluation by thermal cycling for CGA packages with 1752, 1517, 1509, and 1272 inputs/outputs (I/Os) and 1-mm pitch. It presented the thermal cycling (-55C either 100C or 125C) test results for up to 200 cycles. This report presents up to 500 thermal cycles with quality assurance and failure analysis evaluation represented by optical photomicrographs, 2D real time X-ray images, dye-and-pry photomicrographs, and optical/scanning electron Microscopy (SEM) cross-sectional images. The report also presents assembly challenge using reflowing by either vapor phase or rework station of CGA and land grid array (LGA) versions of three high I/O packages both ceramic and plastic configuration. A new test vehicle was designed having high density interconnect (HDI) printed circuit board (PCB) with microvia-in-pad to accommodate both LGA packages as well as a large number of fine pitch ball grid arrays (BGAs). The LGAs either were assembled onto HDI PCB as an LGA or were solder paste print and reflow first to form solder dome on pads before assembly. Both plastic BGAs with 1156 I/O and ceramic LGAs were assembled. It also presented the X-ray inspection results as well as failures due to 200 thermal cycles. Lessons learned on assembly of ceramic LGAs are also presented.

一种叠孔三阶HDI板制作技术研究%Study on the process technology of a stack-via 3 steps HDI board

Institute of Scientific and Technical Information of China (English)

陈世金; 罗旭; 覃新; 乔鹏程; 徐缓

2012-01-01

　　In recent years, because of popularity 3G mobile phone and intelligent mobile phone appearance, promote continuous development of PCB technology, HDI products demand growth accelerated, especially the 3 steps HDI products will become the mainstream of future 3G mobile phone, and intelligent mobile phones are the 3 steps,any-layer HDI design is given priority to, these demand drive HDI technology gradually to higher line density direction, line and space is reduced ceaselessly, panel structure from 1+N+1 to stagger-via, and then to stack-via, the production difficulty is increased ceaselessly. Therefore, for the first 3 steps HDI board production process technology waster of the 3 steps via and order HDI plate production technology will be the key to the market today race.%　　近年来，由于3G手机的普及和智能手机的出现，推动PCB（Printed Circuit Board，印制电路板）技术不断向前发展，加快HDI类产品的增长需求，尤其是三阶HDI产品将成为3G手机未来的主流，而智能手机则以三阶、any-layer HDI设计为主。这些需求带动HDI技术逐渐向更高布线密度方向发展，线宽线距不断减小，板件结构从1+N+1到stagger-via（交错孔），再到stack-via（叠孔），其制作难度不断加大。因此，对三阶HDI板的制作工艺技术进行研究，掌握叠孔三阶及多阶HDI板制作技术将成为抢占当今市场的关键所在。

Isocyanate exposure and respiratory symptoms in Dutch car spray painters

NARCIS (Netherlands)

Heederik, D.; Pronk, A.; Doekes, G.; Bobbeldijk, I.; Preller, L.

2005-01-01

Isocyanate allergy and asthma is an important respiratory disease in most industrialized countries. Little information about its importance is available for the Netherlands. A baseline survey, part of a larger longitudinal epidemiological survey, shows that exposure to mainly HDI monomers and

Isocyanate exposure and asthma in the UK vehicle repair industry.

Science.gov (United States)

Stocks, S J; Jones, K; Piney, M; Agius, R M

2015-12-01

Organic diisocyanates are a common cause of occupational asthma, particularly in motor vehicle repair (MVR) workers. The UK Health & Safety Laboratory provides screening for urinary hexamethylenediamine (UHDA), a biomarker of exposure to 1,6-hexamethylene diisocyanate (HDI). The UK Surveillance of Work-related and Occupational Respiratory Disease scheme (SWORD) has collected reports of occupational asthma since 1996. To compare trends in HDI exposure with trends in the incidence of work-related asthma attributed to isocyanates or paint spraying in MVR workers reported to SWORD. Two-level regression models were used to estimate trends in UHDA levels and work-related asthma in MVR workers reported to SWORD. The direction and magnitude of the trends were compared descriptively. From 2006 to 2014, there was a significant decline in the number of urine samples with detectable levels of UHDA (odds ratio = 0.96; 95% confidence intervals 0.94-0.98) and minimal change in those over the guidance value (1.03; 1.00-1.06). Over the same period, there was a significant decline in all asthma cases attributed to isocyanates or paint spraying reported to SWORD (0.90; 0.86-0.94) and a non-significant decline among MVR workers (0.94; 0.86-1.02). The simultaneous decrease in HDI exposure and incident cases of asthma reported to SWORD is temporally consistent with a reduction in exposure to airborne isocyanate leading to a reduction in asthma. Although this is not direct evidence of a causal relationship between the two trends, it is suggestive. © The Author 2015. Published by Oxford University Press on behalf of the Society of Occupational Medicine.

Hearing Impairment and High Blood Pressure among Bus Drivers in Puducherry.

Science.gov (United States)

Balaji, Rajeshwar; Rajasegaran, Rajalakshmi; John, Nitin Ashok; Venkatappa, Umadevi Sajja

2016-02-01

Noise Induced Hearing Loss (NIHL), a major heath concern due to constant exposure to loud noise is on the rising trend in today's world. The bus drivers are more vulnerable to the auditory and non-auditory ill effects of noise pollution. The aim of this study was to assess and compare the hearing level, blood pressure and peak expiratory flow rate of bus drivers and individuals employed in office jobs. Fifty male bus drivers aged 30-50 years and fifty males of the same group employed in office jobs were recruited as the test and control groups respectively. The hearing level of the individuals in both the groups was assessed using the Hearing Deterioration Index (HDI). The lung function and cardiovascular status of the study participants were assessed by measuring their Peak Expiratory Flow Rate (PEFR) and Blood Pressure (BP) respectively. The mean HDI, PEFR and BP values of both the groups were compared using the unpaired t-test and the extent of correlation between HDI, service years, exposure level, systolic blood pressure (SBP) and diastolic blood pressure (DBP) was determined using Pearson correlation coefficient test. HDI, SBP and DBP were significantly higher among the bus drivers when compared to the controls. However, there was no significant difference in the PEFR values between the test and the control groups. There was a highly significant positive correlation between HDI and service years and exposure level. Similarly, there was a significant positive correlation between exposure level and systolic and diastolic blood pressure. Prolonged exposure to high intensity of sound results in deterioration of hearing capacity and increase in blood pressure among the bus drivers.

Disruptive Technologies in Workmanship: pH-neutral Flux, CDM ESD Events, HDI PCBs

Science.gov (United States)

Plante, Jeannette F.

2010-01-01

This slide presentation describes what it calls "disruptive technologies", i.e., "Low-end disruption" occurs when the rate at which products improve exceeds the rate at which customers can adopt the new performance. Therefore, at some point the performance of the product overshoots the needs of certain customer segments. At this point, a disruptive technology may enter the market and provide a product which has lower performance than the incumbent but which exceeds the requirements of certain segments, thereby gaining a foothold in the market. This concept is viewed in impacting incumbent technologies Rosin Flux, with a pH-neutral water soluble Flux; electrostatic discharge models being disrupted by the charge device model (CDM) concept; and High Density Interconnect Printed Circuit Boards (HDI PCB).

Integrated Environmental Assessment Part III: ExposureAssessment

Energy Technology Data Exchange (ETDEWEB)

McKone, Thomas E.; Small, Mitchell J.

2006-06-01

Human exposure assessment is a key step in estimating the environmental and public health burdens that result chemical emissions in the life cycle of an industrial product or service. This column presents the third in a series of overviews of the state of the art in integrated environmental assessment - earlier columns described emissions estimation (Frey and Small, 2003) and fate and transport modeling (Ramaswami, et al., 2004). When combined, these first two assessment elements provide estimates of ambient concentrations in the environment. Here we discuss how both models and measurements are used to translate ambient concentrations into metrics of human and ecological exposure, the necessary precursors to impact assessment. Exposure assessment is the process of measuring and/or modeling the magnitude, frequency and duration of contact between a potentially harmful agent and a target population, including the size and characteristics of that population (IPCS, 2001; Zartarian, et al., 2005). Ideally the exposure assessment process should characterize the sources, routes, pathways, and uncertainties in the assessment. Route of exposure refers to the way that an agent enters the receptor during an exposure event. Humans contact pollutants through three routes--inhalation, ingestion, and dermal uptake. Inhalation occurs in both outdoor environments and indoor environments where most people spend the majority of their time. Ingestion includes both water and food, as well as soil and dust uptake due to hand-to-mouth activity. Dermal uptake occurs through contacts with consumer products; indoor and outdoor surfaces; the water supply during washing or bathing; ambient surface waters during swimming or boating; soil during activities such as work, gardening, and play; and, to a lesser extent, from the air that surrounds us. An exposure pathway is the course that a pollutant takes from an ambient environmental medium (air, soil, water, biota, etc), to an exposure medium

Accuracy and precision of four value-added blood glucose meters: the Abbott Optium, the DDI Prodigy, the HDI True Track, and the HypoGuard Assure Pro.

Science.gov (United States)

Sheffield, Catherine A; Kane, Michael P; Bakst, Gary; Busch, Robert S; Abelseth, Jill M; Hamilton, Robert A

2009-09-01

This study compared the accuracy and precision of four value-added glucose meters. Finger stick glucose measurements in diabetes patients were performed using the Abbott Diabetes Care (Alameda, CA) Optium, Diagnostic Devices, Inc. (Miami, FL) DDI Prodigy, Home Diagnostics, Inc. (Fort Lauderdale, FL) HDI True Track Smart System, and Arkray, USA (Minneapolis, MN) HypoGuard Assure Pro. Finger glucose measurements were compared with laboratory reference results. Accuracy was assessed by a Clarke error grid analysis (EGA), a Parkes EGA, and within 5%, 10%, 15%, and 20% of the laboratory value criteria (chi2 analysis). Meter precision was determined by calculating absolute mean differences in glucose values between duplicate samples (Kruskal-Wallis test). Finger sticks were obtained from 125 diabetes patients, of which 90.4% were Caucasian, 51.2% were female, 83.2% had type 2 diabetes, and average age of 59 years (SD 14 years). Mean venipuncture blood glucose was 151 mg/dL (SD +/-65 mg/dL; range, 58-474 mg/dL). Clinical accuracy by Clarke EGA was demonstrated in 94% of Optium, 82% of Prodigy, 61% of True Track, and 77% of the Assure Pro samples (P Abbott Optium was significantly more accurate than the other meter systems, whereas the HDI True Track was significantly less accurate and less precise compared to the other meter systems.

Assessment of human exposures

Energy Technology Data Exchange (ETDEWEB)

Lebret, E. [RIVM-National Inst. of Public Health and Environmental Protection (Netherlands)

1995-12-31

This article describes some of the features of the assessment of human exposure to environmental pollutants in epidemiological studies. Since exposure assessment in air pollution epidemiology studies typically involve professionals from various backgrounds, interpretation of a concepts like `exposure` may vary. A brief descriptions is therefore given by way of introduction

Assessment of human exposures

Energy Technology Data Exchange (ETDEWEB)

Lebret, E [RIVM-National Inst. of Public Health and Environmental Protection (Netherlands)

1996-12-31

This article describes some of the features of the assessment of human exposure to environmental pollutants in epidemiological studies. Since exposure assessment in air pollution epidemiology studies typically involve professionals from various backgrounds, interpretation of a concepts like `exposure` may vary. A brief descriptions is therefore given by way of introduction

Neuronal modulation of lung injury induced by polymeric hexamethylene diisocyanate in mice

International Nuclear Information System (INIS)

Lee, C.-T.; Poovey, Halet G.; Rando, Roy J.; Hoyle, Gary W.

2007-01-01

1,6-Hexamethylene diisocyanate biuret trimer (HDI-BT) is a nonvolatile isocyanate that is a component of polyurethane spray paints. HDI-BT is a potent irritant that when inhaled stimulates sensory nerves of the respiratory tract. The role of sensory nerves in modulating lung injury following inhalation of HDI-BT was assessed in genetically manipulated mice with altered innervation of the lung. Knockout mice with a mutation in the low-affinity nerve growth factor receptor (NGFR), which have decreased innervation by nociceptive nerve fibers, and transgenic mice expressing nerve growth factor (NGF) from the lung-specific Clara cell secretory protein (CCSP) promoter, which have increased innervation of the airways, were exposed to HDI-BT aerosol and evaluated at various times after exposure. NGFR knockout mice exhibited significantly more, and CCSP-NGF transgenic mice exhibited significantly less injury and inflammation compared with wild-type mice, indicative of a protective effect of nociceptive nerves on the lung following HDI-BT inhalation. Transgenic mice overexpressing the tachykinin 1 receptor (Tacr1) in lung epithelial cells also showed less severe injury and inflammation compared with wild-type mice after HDI-BT exposure, establishing a role for released tachykinins acting through Tacr1 in mediating at least part of the protective effect. Treatment of lung fragments from Tacr1 transgenic mice with the Tacr1 ligand substance P resulted in increased cAMP accumulation, suggesting this compound as a possible signaling mediator of protective effects on the lung following nociceptive nerve stimulation. The results indicate that sensory nerves acting through Tacr1 can exert protective or anti-inflammatory effects in the lung following isocyanate exposure

Assessment of Human Exposure to ENMs.

Science.gov (United States)

Jiménez, Araceli Sánchez; van Tongeren, Martie

2017-01-01

Human exposure assessment of engineered nanomaterials (ENMs) is hampered, among other factors, by the difficulty to differentiate ENM from other nanomaterials (incidental to processes or naturally occurring) and the lack of a single metric that can be used for health risk assessment. It is important that the exposure assessment is carried out throughout the entire life-cycle as releases can occur at the different stages of the product life-cycle, from the synthesis, manufacture of the nano-enable product (occupational exposure) to the professional and consumer use of nano-enabled product (consumer exposure) and at the end of life.Occupational exposure surveys should follow a tiered approach, increasing in complexity in terms of instruments used and sampling strategy applied with higher tiers in order tailor the exposure assessment to the specific materials used and workplace exposure scenarios and to reduce uncertainty in assessment of exposure. Assessment of consumer exposure and of releases from end-of-life processes currently relies on release testing of nano-enabled products in laboratory settings.

Challenges and perspectives of nanoparticle exposure assessment.

Science.gov (United States)

Lee, Ji Hyun; Moon, Min Chaul; Lee, Joon Yeob; Yu, Il Je

2010-06-01

Nanoparticle exposure assessment presents a unique challenge in the field of occupational and environmental health. With the commercialization of nanotechnology, exposure usually starts from the workplace and then spreads to environment and consumer exposure. This report discusses the current trends of nanoparticle exposure assessment, including the definition of nanotechnology relevant terms, essential physicochemical properties for nanomaterial characterization, current international activities related nanomaterial safety, and exposure assessment standard development for nanotechnology. Further this report describes challenges of nanoparticle exposure assessment such as background measurement, metrics of nanoparticle exposure assessment and personal sampling.

Hemoglobin adducts in workers exposed to 1,6-hexamethylene diisocyanate.

Science.gov (United States)

Flack, Sheila L; Fent, Kenneth W; Gaines, Linda G T; Thomasen, Jennifer M; Whittaker, Stephen G; Ball, Louise M; Nylander-French, Leena A

2011-05-01

We investigated the utility of 1,6-hexamethylene diamine (HDA) hemoglobin adducts as biomarkers of exposure to 1,6-hexamethylene diisocyanate (HDI) monomer. Blood samples from 15 spray painters applying HDI-containing paint were analyzed for hemoglobin HDA (HDA-Hb) and N-acetyl-1,6-hexamethylene diamine (monoacetyl-HDA-Hb) by GC-MS. HDA-Hb was detected in the majority of workers (≤1.2-37 ng/g Hb), whereas monoacetyl-HDA-Hb was detected in one worker (0.06 ng/g Hb). The stronger, positive association between HDA-Hb and cumulative HDI exposure (r(2) = 0.3, p HDA-Hb adducts. This association demonstrates the suitability of HDA-Hb adducts for further validation as a biomarker of HDI exposure.

Human Exposure Assessment for Air Pollution.

Science.gov (United States)

Han, Bin; Hu, Li-Wen; Bai, Zhipeng

2017-01-01

Assessment of human exposure to air pollution is a fundamental part of the more general process of health risk assessment. The measurement methods for exposure assessment now include personal exposure monitoring, indoor-outdoor sampling, mobile monitoring, and exposure assessment modeling (such as proximity models, interpolation model, air dispersion models, and land-use regression (LUR) models). Among these methods, personal exposure measurement is considered to be the most accurate method of pollutant exposure assessment until now, since it can better quantify observed differences and better reflect exposure among smaller groups of people at ground level. And since the great differences of geographical environment, source distribution, pollution characteristics, economic conditions, and living habits, there is a wide range of differences between indoor, outdoor, and individual air pollution exposure in different regions of China. In general, the indoor particles in most Chinese families comprise infiltrated outdoor particles, particles generated indoors, and a few secondary organic aerosol particles, and in most cases, outdoor particle pollution concentrations are a major contributor to indoor concentrations in China. Furthermore, since the time, energy, and expense are limited, it is difficult to measure the concentration of pollutants for each individual. In recent years, obtaining the concentration of air pollutants by using a variety of exposure assessment models is becoming a main method which could solve the problem of the increasing number of individuals in epidemiology studies.

Lo sviluppo come fenomeno multidimensionale. Confronto tra l’ISU e un indice di sviluppo sostenibile (Development as Multi-dimensional Phenomenon: Comparison between the HDI and an Index of Sustainable Development

Directory of Open Access Journals (Sweden)

Paolo Palazzi

2004-09-01

Full Text Available On the basis of the UNDP data used to calculate the Human Development Index (HDI, the paper applies a methodology to determine a different development index able to show disequilibria between the different aspects of development (in this case income, life expectancy and education. The basic idea is that the concept of total substitutability between the variables utilized to calculate the HDI must be abandoned, and it is therefore important to take into account the unbalance between the various aspects characterizing the development level when calculating the index. The author utilizes the concept of the social sustainability of development over time, assuming that it will show a higher value with a more even balance between the various aspects of development. The concave average methodology proposed in Casadio Tarabusi ePalazzi (2004 is able to "penalize" development levels proportionally to the disequilibrium of the variables utilized to measure it. In the paper the new indicator is calculated for 162 countries for the years 1997-2001. Comparison between HDI and the new index shows notable differences not only in the ranking of the countries, but also in the time dynamics of the two indicators, now of the opposite sign for many countries. Finally, utilizing multivariate statistical analysis the presence of disequilibria in the various countries is evidenced together with their dynamics over time.

An Exposure Assessment of Polybrominated Diphenyl Ethers ...

Science.gov (United States)

EPA announced the availability of the final report, An Exposure Assessment of Polybrominated Diphenyl Ethers. This report provides a comprehensive assessment of the exposure of Americans to this class of persistent organic pollutants. Individual chapters in this document address: the production, use, and lifecycle of PBDEs; environmental fate; environmental levels; and human exposure. This final report addresses the exposure assessment needs identified in the OPBDE Workgroup project plan. It provides a comprehensive assessment of the exposure of Americans to this class of persistent organic pollutants. Individual chapters in this document address: the production, use, and lifecycle of PBDEs; environmental fate; environmental levels; and human exposure.

Factors affecting variability in the urinary biomarker 1,6-hexamethylene diamine in workers exposed to 1,6-hexamethylene diisocyanate.

Science.gov (United States)

Gaines, Linda G T; Fent, Kenneth W; Flack, Sheila L; Thomasen, Jennifer M; Whittaker, Stephen G; Nylander-French, Leena A

2011-01-01

Although urinary 1,6-hexamethylene diamine (HDA) is a useful biomarker of exposure to 1,6-hexamethylene diisocyanate (HDI), a large degree of unexplained intra- and inter-individual variability exists between estimated HDI exposure and urine HDA levels. We investigated the effect of individual and workplace factors on urine HDA levels using quantitative dermal and inhalation exposure data derived from a survey of automotive spray painters exposed to HDI. Painters' dermal and breathing-zone HDI-exposures were monitored over an entire workday for up to three separate workdays, spaced approximately one month apart. One urine sample was collected before the start of work with HDI-containing paints, and multiple samples were collected throughout the workday. Using mixed effects multiple linear regression modeling, coverall use resulted in significantly lower HDA levels (p = 0.12), and weekday contributed to significant variability in HDA levels (p = 0.056). We also investigated differences in urine HDA levels stratified by dichotomous and classification covariates using analysis of variance. Use of coveralls (p = 0.05), respirator type worn (p = 0.06), smoker status (p = 0.12), paint-booth type (p = 0.02), and more than one painter at the shop (p = 0.10) were all found to significantly affect urine HDA levels adjusted for creatinine concentration. Coverall use remained significant (p = 0.10), even after adjusting for respirator type. These results indicate that the variation in urine HDA level is mainly due to workplace factors and that appropriate dermal and inhalation protection is required to prevent HDI exposure.

Exploring Global Exposure Factors Resources for Use in Consumer Exposure Assessments

Science.gov (United States)

Zaleski, Rosemary T.; Egeghy, Peter P.; Hakkinen, Pertti J.

2016-01-01

This publication serves as a global comprehensive resource for readers seeking exposure factor data and information relevant to consumer exposure assessment. It describes the types of information that may be found in various official surveys and online and published resources. The relevant exposure factors cover a broad range, including general exposure factor data found in published compendia and databases and resources about specific exposure factors, such as human activity patterns and housing information. Also included are resources on exposure factors related to specific types of consumer products and the associated patterns of use, such as for a type of personal care product or a type of children’s toy. Further, a section on using exposure factors for designing representative exposure scenarios is included, along with a look into the future for databases and other exposure science developments relevant for consumer exposure assessment. PMID:27455300

Asbestos Exposure Assessment Database

Science.gov (United States)

Arcot, Divya K.

2010-01-01

Exposure to particular hazardous materials in a work environment is dangerous to the employees who work directly with or around the materials as well as those who come in contact with them indirectly. In order to maintain a national standard for safe working environments and protect worker health, the Occupational Safety and Health Administration (OSHA) has set forth numerous precautionary regulations. NASA has been proactive in adhering to these regulations by implementing standards which are often stricter than regulation limits and administering frequent health risk assessments. The primary objective of this project is to create the infrastructure for an Asbestos Exposure Assessment Database specific to NASA Johnson Space Center (JSC) which will compile all of the exposure assessment data into a well-organized, navigable format. The data includes Sample Types, Samples Durations, Crafts of those from whom samples were collected, Job Performance Requirements (JPR) numbers, Phased Contrast Microscopy (PCM) and Transmission Electron Microscopy (TEM) results and qualifiers, Personal Protective Equipment (PPE), and names of industrial hygienists who performed the monitoring. This database will allow NASA to provide OSHA with specific information demonstrating that JSC s work procedures are protective enough to minimize the risk of future disease from the exposures. The data has been collected by the NASA contractors Computer Sciences Corporation (CSC) and Wyle Laboratories. The personal exposure samples were collected from devices worn by laborers working at JSC and by building occupants located in asbestos-containing buildings.

Lo sviluppo come fenomeno multidimensionale. Confronto tra l’ISU e un indice di sviluppo sostenibile (Development as Multi-dimensional Phenomenon: Comparison between the HDI and an Index of Sustainable Development

Directory of Open Access Journals (Sweden)

Paolo Palazzi

2012-04-01

Full Text Available On the basis of the UNDP data used to calculate the Human Development Index (HDI, the paper applies a methodology to determine a different development index able to show disequilibria between the different aspects of development (in this case income, life expectancy and education. The basic idea is that the concept of total substitutability between the variables utilized to calculate the HDI must be abandoned, and it is therefore important to take into account the unbalance between the various aspects characterizing the development level when calculating the index. The author utilizes the concept of the social sustainability of development over time, assuming that it will show a higher value with a more even balance between the various aspects of development. The concave average methodology proposed in Casadio Tarabusi ePalazzi (2004 is able to "penalize" development levels proportionally to the disequilibrium of the variables utilized to measure it. In the paper the new indicator is calculated for 162 countries for the years 1997-2001. Comparison between HDI and the new index shows notable differences not only in the ranking of the countries, but also in the time dynamics of the two indicators, now of the opposite sign for many countries. Finally, utilizing multivariate statistical analysis the presence of disequilibria in the various countries is evidenced together with their dynamics over time.  JEL Codes: C43, O10, O15, Q01Keywords: Development, Education, Human Development, Indice

Exposure Assessment Tools by Chemical Classes - Nanomaterials

Science.gov (United States)

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Exposure Assessment Tools by Tiers and Types - Deterministic and Probabilistic Assessments

Science.gov (United States)

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Determinants of Dermal Exposure Relevant for Exposure Modelling in Regulatory Risk Assessment

NARCIS (Netherlands)

Marquart, J.; Brouwer, D.H.; Gijsbers, J.H.J.; Links, I.H.M.; Warren, N.; Hemmen, J.J. van

2003-01-01

Risk assessment of chemicals requires assessment of the exposure levels of workers. In the absence of adequate specific measured data, models are often used to estimate exposure levels. For dermal exposure only a few models exist, which are not validated externally. In the scope of a large European

Comparative Probabilistic Assessment of Occupational Pesticide Exposures Based on Regulatory Assessments

Science.gov (United States)

Pouzou, Jane G.; Cullen, Alison C.; Yost, Michael G.; Kissel, John C.; Fenske, Richard A.

2018-01-01

Implementation of probabilistic analyses in exposure assessment can provide valuable insight into the risks of those at the extremes of population distributions, including more vulnerable or sensitive subgroups. Incorporation of these analyses into current regulatory methods for occupational pesticide exposure is enabled by the exposure data sets and associated data currently used in the risk assessment approach of the Environmental Protection Agency (EPA). Monte Carlo simulations were performed on exposure measurements from the Agricultural Handler Exposure Database and the Pesticide Handler Exposure Database along with data from the Exposure Factors Handbook and other sources to calculate exposure rates for three different neurotoxic compounds (azinphos methyl, acetamiprid, emamectin benzoate) across four pesticide-handling scenarios. Probabilistic estimates of doses were compared with the no observable effect levels used in the EPA occupational risk assessments. Some percentage of workers were predicted to exceed the level of concern for all three compounds: 54% for azinphos methyl, 5% for acetamiprid, and 20% for emamectin benzoate. This finding has implications for pesticide risk assessment and offers an alternative procedure that may be more protective of those at the extremes of exposure than the current approach. PMID:29105804

Comparative Probabilistic Assessment of Occupational Pesticide Exposures Based on Regulatory Assessments.

Science.gov (United States)

Pouzou, Jane G; Cullen, Alison C; Yost, Michael G; Kissel, John C; Fenske, Richard A

2017-11-06

Implementation of probabilistic analyses in exposure assessment can provide valuable insight into the risks of those at the extremes of population distributions, including more vulnerable or sensitive subgroups. Incorporation of these analyses into current regulatory methods for occupational pesticide exposure is enabled by the exposure data sets and associated data currently used in the risk assessment approach of the Environmental Protection Agency (EPA). Monte Carlo simulations were performed on exposure measurements from the Agricultural Handler Exposure Database and the Pesticide Handler Exposure Database along with data from the Exposure Factors Handbook and other sources to calculate exposure rates for three different neurotoxic compounds (azinphos methyl, acetamiprid, emamectin benzoate) across four pesticide-handling scenarios. Probabilistic estimates of doses were compared with the no observable effect levels used in the EPA occupational risk assessments. Some percentage of workers were predicted to exceed the level of concern for all three compounds: 54% for azinphos methyl, 5% for acetamiprid, and 20% for emamectin benzoate. This finding has implications for pesticide risk assessment and offers an alternative procedure that may be more protective of those at the extremes of exposure than the current approach. © 2017 Society for Risk Analysis.

Challenges and Perspectives of Nanoparticle Exposure Assessment

OpenAIRE

Lee, Ji Hyun; Moon, Min Chaul; Lee, Joon Yeob; Yu, Il Je

2010-01-01

Nanoparticle exposure assessment presents a unique challenge in the field of occupational and environmental health. With the commercialization of nanotechnology, exposure usually starts from the workplace and then spreads to environment and consumer exposure. This report discusses the current trends of nanoparticle exposure assessment, including the definition of nanotechnology relevant terms, essential physicochemical properties for nanomaterial characterization, current international activi...

Assessing population exposures to motor vehicle exhaust.

Science.gov (United States)

Van Atten, Chris; Brauer, Michael; Funk, Tami; Gilbert, Nicolas L; Graham, Lisa; Kaden, Debra; Miller, Paul J; Bracho, Leonora Rojas; Wheeler, Amanda; White, Ronald H

2005-01-01

The need is growing for a better assessment of population exposures to motor vehicle exhaust in proximity to major roads and highways. This need is driven in part by emerging scientific evidence of adverse health effects from such exposures and policy requirements for a more targeted assessment of localized public health impacts related to road expansions and increasing commercial transportation. The momentum for improved methods in measuring local exposures is also growing in the scientific community, as well as for discerning which constituents of the vehicle exhaust mixture may exert greater public health risks for those who are exposed to a disproportionate share of roadway pollution. To help elucidate the current state-of-the-science in exposure assessments along major roadways and to help inform decision makers of research needs and trends, we provide an overview of the emerging policy requirements, along with a conceptual framework for assessing exposure to motor-vehicle exhaust that can help inform policy decisions. The framework includes the pathway from the emission of a single vehicle, traffic emissions from multiple vehicles, atmospheric transformation of emissions and interaction with topographic and meteorologic features, and contact with humans resulting in exposure that can result in adverse health impacts. We describe the individual elements within the conceptual framework for exposure assessment and discuss the strengths and weaknesses of various approaches that have been used to assess public exposures to motor vehicle exhaust.

Health risk assessment of exposure to ionizing radiation

International Nuclear Information System (INIS)

Ogata, Hiromitsu

2011-01-01

Risk assessment is an essential process for evaluating the human health effects of exposure to ionizing radiation and for determining acceptable levels of exposure. There are two major components of radiation risk assessment: a measure of exposure level and a measure of disease occurrence. For quantitative estimation of health risks, it is important to evaluate the association between exposure and disease occurrence using epidemiological or experimental data. In these approaches, statistical risk models are used particularly for estimating cancer risks related to exposure to low levels of radiation. This paper presents a summary of basic models and methods of risk assessment for studying exposure-risk relationships. Moreover, quantitative risk estimates are subject to several sources of uncertainty due to inherent limitations in risk assessment studies. This paper also discusses the limitations of radiation risk assessment. (author)

Opportunities for using spatial property assessment data in air pollution exposure assessments

Directory of Open Access Journals (Sweden)

Keller C Peter

2005-10-01

Full Text Available Abstract Background Many epidemiological studies examining the relationships between adverse health outcomes and exposure to air pollutants use ambient air pollution measurements as a proxy for personal exposure levels. When pollution levels vary at neighbourhood levels, using ambient pollution data from sparsely located fixed monitors may inadequately capture the spatial variation in ambient pollution. A major constraint to moving toward exposure assessments and epidemiological studies of air pollution at a neighbourhood level is the lack of readily available data at appropriate spatial resolutions. Spatial property assessment data are widely available in North America and may provide an opportunity for developing neighbourhood level air pollution exposure assessments. Results This paper provides a detailed description of spatial property assessment data available in the Pacific Northwest of Canada and the United States, and provides examples of potential applications of spatial property assessment data for improving air pollution exposure assessment at the neighbourhood scale, including: (1 creating variables for use in land use regression modelling of neighbourhood levels of ambient air pollution; (2 enhancing wood smoke exposure estimates by mapping fireplace locations; and (3 using data available on individual building characteristics to produce a regional air pollution infiltration model. Conclusion Spatial property assessment data are an extremely detailed data source at a fine spatial resolution, and therefore a source of information that could improve the quality and spatial resolution of current air pollution exposure assessments.

Determinants of dermal exposure relevant for exposure modelling in regulatory risk assessment.

Science.gov (United States)

Marquart, J; Brouwer, D H; Gijsbers, J H J; Links, I H M; Warren, N; van Hemmen, J J

2003-11-01

Risk assessment of chemicals requires assessment of the exposure levels of workers. In the absence of adequate specific measured data, models are often used to estimate exposure levels. For dermal exposure only a few models exist, which are not validated externally. In the scope of a large European research programme, an analysis of potential dermal exposure determinants was made based on the available studies and models and on the expert judgement of the authors of this publication. Only a few potential determinants appear to have been studied in depth. Several studies have included clusters of determinants into vaguely defined parameters, such as 'task' or 'cleaning and maintenance of clothing'. Other studies include several highly correlated parameters, such as 'amount of product handled', 'duration of task' and 'area treated', and separation of these parameters to study their individual influence is not possible. However, based on the available information, a number of determinants could clearly be defined as proven or highly plausible determinants of dermal exposure in one or more exposure situation. This information was combined with expert judgement on the scientific plausibility of the influence of parameters that have not been extensively studied and on the possibilities to gather relevant information during a risk assessment process. The result of this effort is a list of determinants relevant for dermal exposure models in the scope of regulatory risk assessment. The determinants have been divided into the major categories 'substance and product characteristics', 'task done by the worker', 'process technique and equipment', 'exposure control measures', 'worker characteristics and habits' and 'area and situation'. To account for the complex nature of the dermal exposure processes, a further subdivision was made into the three major processes 'direct contact', 'surface contact' and 'deposition'.

Probabilistic mercury multimedia exposure assessment in small children and risk assessment.

Science.gov (United States)

Morisset, Typhaine; Ramirez-Martinez, Alejandra; Wesolek, Nathalie; Roudot, Alain-Claude

2013-09-01

Emissions of mercury in the environment have been decreasing for several years. However, mercury species are still found in different media (food, water, air and breast-milk). Due to mercury toxicity and typical behaviour in children, we have conducted a mercury exposure assessment in French babies, and small children aged 0 to 36months. Consumption and mercury concentration data were chosen for the exposure assessment. The Monte Carlo technique has been used to calculate the weekly exposure dose in order to integrate inter-individual variability and parameter uncertainty. Exposure values have been compared to toxicological reference values for health risk assessment. Inorganic mercury median exposure levels ranged from 0.160 to 1.649μg/kg of body weight per week (95th percentile (P95): 0.298-2.027µg/kg bw/week); elemental mercury median exposure level in children was 0.11ng/kg bw/week (P95: 28ng/kg bw/week); and methylmercury median exposure level ranged from 0.247 to 0.273µg/kg bw/week (P95: 0.425-0.463µg/kg bw/week). Only elemental mercury by inhalation route (indoor air) and methylmercury by ingestion (fish and breast-milk) seem to lead to a health risk in small children. These results confirm the importance of assessing total mercury concentration in media like breast-milk, indoor air and dust and methylmercury level in food, other than fish and seafood. In this way, informed monitoring plan and risk assessment in an at-risk sub-population can be set. © 2013 Elsevier Ltd. All rights reserved.

Human exposure assessment to environmental chemicals using biomonitoring.

Science.gov (United States)

Calafat, Antonia M; Ye, Xiaoyun; Silva, Manori J; Kuklenyik, Zsuzsanna; Needham, Larry L

2006-02-01

In modern societies, humans may be exposed to a wide spectrum of environmental chemicals. Although the health significance of this exposure for many chemicals is unknown, studies to investigate the prevalence of exposure are warranted because of the chemicals' potential harmful health effects, as often indicated in animal studies. Three tools have been used to assess exposure: exposure history/questionnaire information, environmental monitoring, and biomonitoring (i.e. measuring concentrations of the chemicals, their metabolites, or their adducts in human specimens). We present an overview on the use of biomonitoring in exposure assessment using phthalates, bisphenol A and other environmental phenols, and perfluorinated chemicals as examples. We discuss some factors relevant for interpreting and understanding biomonitoring data, including selection of both biomarkers of exposure and human matrices, and toxicokinetic information. The use of biomonitoring in human risk assessment is not discussed.

Retrospective Occupational Exposure Assessment in Community-Based Studies Made Easier

International Nuclear Information System (INIS)

Fritschi, L.; Girschik, J.; Friesen, M.C.; Glass, D.; Monash, G.B.; Sadkowsky, T.

2010-01-01

Occ DEAS Assessing occupational exposure in retrospective community-based case-control studies is difficult as measured exposure data are very seldom available. The expert assessment method is considered the most accurate way to attribute exposure but it is a time consuming and expensive process and may be seen as subjective, non reproducible, and non transparent. In this paper, we describe these problems and outline our solutions as ope rationalized in a web-based software application (Occ DEAS). The novel aspects of Occ DEAS are combining all steps in the assessment into one software package; enmeshing the process of assessment into the development of questionnaires; selecting the exposure(s) of interest; specifying rules for exposure assignment; allowing manual or automatic assessments; ensuring that circumstances in which exposure is possible for an individual are highlighted for review; providing reports to ensure consistency of assessment. Development of this application has the potential to make high-quality occupational assessment more efficient and accessible for epidemiological studies

Assessment of predictive dermal exposure to chemicals in the work environment

Directory of Open Access Journals (Sweden)

Agnieszka Jankowska

2017-08-01

Full Text Available Assessment of dermal exposure to chemicals in the work environment is problematic, mainly as a result of the lack of measurement data on occupational exposure to chemicals. Due to common prevalence of occupational skin exposure and its health consequences it is necessary to look for efficient solutions allowing for reliable exposure assessment. The aim of the study is to present predictive models used to assess non-measured dermal exposure, as well as to acquaint Polish users with the principles of the selected model functioning. This paper presents examples of models to assist the employer in the the assessment of occupational exposure associated with the skin contact with chemicals, developed in European Union (EU countries, as well as in countries outside the EU. Based on the literature data dermal exposure models EASE (Estimation and Assessment of Substance Exposure, COSHH Essentials (Control of Substances Hazardous to Health Regulations, DREAM (Dermal Exposure Assessment Method, Stoffenmanager , ECETOC TRA (European Centre for Ecotoxicology and Toxicology of Chemicals Targeted Risk Assessment, MEASE (Metal’s EASE, PHED (Pesticide Handlers Exposure Database, DERM (Dermal Exposure Ranking Method and RISKOFDERM (Risk Assessment of Occupational Dermal Exposure to Chemicals were briefly described. Moreover the characteristics of RISKOFDERM, guidelines for its use, information on input and output data were further detailed. Problem of full work shift dermal exposure assessment is described. An example of exposure assessment using RISKOFDERM and effectiveness evaluation to date were also presented. When no measurements are available, RISKOFDERM allows dermal exposure assessment and thus can improve the risk assessment quality and effectiveness of dermal risk management. Med Pr 2017;68(4:557–569

Wishful Thinking? Inside the Black Box of Exposure Assessment.

Science.gov (United States)

Money, Annemarie; Robinson, Christine; Agius, Raymond; de Vocht, Frank

2016-05-01

Decision-making processes used by experts when undertaking occupational exposure assessment are relatively unknown, but it is often assumed that there is a common underlying method that experts employ. However, differences in training and experience of assessors make it unlikely that one general method for expert assessment would exist. Therefore, there are concerns about formalizing, validating, and comparing expert estimates within and between studies that are difficult, if not impossible, to characterize. Heuristics on the other hand (the processes involved in decision making) have been extensively studied. Heuristics are deployed by everyone as short-cuts to make the often complex process of decision-making simpler, quicker, and less burdensome. Experts' assessments are often subject to various simplifying heuristics as a way to reach a decision in the absence of sufficient data. Therefore, investigating the underlying heuristics or decision-making processes involved may help to shed light on the 'black box' of exposure assessment. A mixed method study was conducted utilizing both a web-based exposure assessment exercise incorporating quantitative and semiqualitative elements of data collection, and qualitative semi-structured interviews with exposure assessors. Qualitative data were analyzed using thematic analysis. Twenty-five experts completed the web-based exposure assessment exercise and 8 of these 25 were randomly selected to participate in the follow-up interview. Familiar key themes relating to the exposure assessment exercise emerged; 'intensity'; 'probability'; 'agent'; 'process'; and 'duration' of exposure. However, an important aspect of the detailed follow-up interviews revealed a lack of structure and order with which participants described their decision making. Participants mostly described some form of an iterative process, heavily relying on the anchoring and adjustment heuristic, which differed between experts. In spite of having undertaken

Perspectives for integrating human and environmental exposure assessments.

Science.gov (United States)

Ciffroy, P; Péry, A R R; Roth, N

2016-10-15

Integrated Risk Assessment (IRA) has been defined by the EU FP7 HEROIC Coordination action as "the mutual exploitation of Environmental Risk Assessment for Human Health Risk Assessment and vice versa in order to coherently and more efficiently characterize an overall risk to humans and the environment for better informing the risk analysis process" (Wilks et al., 2015). Since exposure assessment and hazard characterization are the pillars of risk assessment, integrating Environmental Exposure assessment (EEA) and Human Exposure assessment (HEA) is a major component of an IRA framework. EEA and HEA typically pursue different targets, protection goals and timeframe. However, human and wildlife species also share the same environment and they similarly inhale air and ingest water and food through often similar overlapping pathways of exposure. Fate models used in EEA and HEA to predict the chemicals distribution among physical and biological media are essentially based on common properties of chemicals, and internal concentration estimations are largely based on inter-species (i.e. biota-to-human) extrapolations. Also, both EEA and HEA are challenged by increasing scientific complexity and resources constraints. Altogether, these points create the need for a better exploitation of all currently existing data, experimental approaches and modeling tools and it is assumed that a more integrated approach of both EEA and HEA may be part of the solution. Based on the outcome of an Expert Workshop on Extrapolations in Integrated Exposure Assessment organized by the HEROIC project in January 2014, this paper identifies perspectives and recommendations to better harmonize and extrapolate exposure assessment data, models and methods between Human Health and Environmental Risk Assessments to support the further development and promotion of the concept of IRA. Ultimately, these recommendations may feed into guidance showing when and how to apply IRA in the regulatory decision

Exposure Assessment Tools by Lifestages and Populations - General Population

Science.gov (United States)

EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

Safety assessments for potential exposures

International Nuclear Information System (INIS)

Dunn, D.I.

2012-04-01

Safety Assessment of potential exposures have been carried out in major practices, namely: industrial radiography, gamma irradiators and electron accelerators used in industry and research, and radiotherapy. This paper focuses on reviewing safety assessment methodologies and using developed software to analyse radiological accidents, also review, and discuss these past accidents.The primary objective of the assessment is to assess the adequacy of planned or existing measures for protection and safety and to identify any additional measures that should be put in place. As such, both routine use of the source and the probability and magnitude of potential exposures arising from accidents or incidents should be considered. Where the assessment indicates that there is a realistic possibility of an accident affecting workers or members of the public or having consequences for the environment, the registrant or licensee should prepare a suitable emergency plan. A safety assessment for normal operation addresses all the conditions under which the radiation source operates as expected, including all phases of the lifetime of the source. Due account needs to be taken of the different factors and conditions that will apply during non-operational phases, such as installation, commissioning and maintenance. (author)

Progress in human exposure assessment for biocidal products

NARCIS (Netherlands)

Hemmen, J.J. van

2004-01-01

An important shortcoming in our present knowledge required for risk assessment of biocidal products is the assessment of human exposure. This knowledge gap has been filled in a preliminary fashion with the TNsG on human exposure to biocidal products (available from the ECB website). Explicit User

Assessment of chemical exposures: calculation methods for environmental professionals

National Research Council Canada - National Science Library

Daugherty, Jack E

1997-01-01

... on by scientists, businessmen, and policymakers. Assessment of Chemical Exposures: Calculation Methods for Environmental Professionals addresses the expanding scope of exposure assessments in both the workplace and environment...

Risk assessment and management of radiofrequency radiation exposure

Energy Technology Data Exchange (ETDEWEB)

Dabala, Dana [Railways Medical Clinic Cluj-Napoca, Occupational Medicine Department, 16-20 Bilascu Gheorghe St., 400015 Cluj-Napoca (Romania); Surducan, Emanoil; Surducan, Vasile; Neamtu, Camelia [National Institute for Research and Development of Isotopic and Molecular Technologies, 65-103 Donath St., 400293 Cluj-Napoca (Romania)

2013-11-13

Radiofrequency radiation (RFR) industry managers, occupational physicians, security department, and other practitioners must be advised on the basic of biophysics and the health effects of RF electromagnetic fields so as to guide the management of exposure. Information on biophysics of RFR and biological/heath effects is derived from standard texts, literature and clinical experiences. Emergency treatment and ongoing care is outlined, with clinical approach integrating the circumstances of exposure and the patient's symptoms. Experimental risk assessment model in RFR chronic exposure is proposed. Planning for assessment and monitoring exposure, ongoing care, safety measures and work protection are outlining the proper management.

Risk assessment and management of radiofrequency radiation exposure

International Nuclear Information System (INIS)

Dabala, Dana; Surducan, Emanoil; Surducan, Vasile; Neamtu, Camelia

2013-01-01

Radiofrequency radiation (RFR) industry managers, occupational physicians, security department, and other practitioners must be advised on the basic of biophysics and the health effects of RF electromagnetic fields so as to guide the management of exposure. Information on biophysics of RFR and biological/heath effects is derived from standard texts, literature and clinical experiences. Emergency treatment and ongoing care is outlined, with clinical approach integrating the circumstances of exposure and the patient's symptoms. Experimental risk assessment model in RFR chronic exposure is proposed. Planning for assessment and monitoring exposure, ongoing care, safety measures and work protection are outlining the proper management

Human exposure to bisphenol A by biomonitoring: Methods, results and assessment of environmental exposures

International Nuclear Information System (INIS)

Dekant, Wolfgang; Voelkel, Wolfgang

2008-01-01

Human exposure to bisphenol A is controversially discussed. This review critically assesses methods for biomonitoring of bisphenol A exposures and reported concentrations of bisphenol A in blood and urine of non-occupationally ('environmentally') exposed humans. From the many methods published to assess bisphenol A concentrations in biological media, mass spectrometry-based methods are considered most appropriate due to high sensitivity, selectivity and precision. In human blood, based on the known toxicokinetics of bisphenol A in humans, the expected very low concentrations of bisphenol A due to rapid biotransformation and the very rapid excretion result in severe limitations in the use of reported blood levels of bisphenol A for exposure assessment. Due to the rapid and complete excretion of orally administered bisphenol A, urine samples are considered as the appropriate body fluid for bisphenol A exposure assessment. In urine samples from several cohorts, bisphenol A (as glucuronide) was present in average concentrations in the range of 1-3 μg/L suggesting that daily human exposure to bisphenol A is below 6 μg per person (< 0.1 μg/kg bw/day) for the majority of the population

The incidence and mortality of ovarian cancer and their relationship with the Human Development Index in Asia.

Science.gov (United States)

Razi, Saeid; Ghoncheh, Mahshid; Mohammadian-Hafshejani, Abdollah; Aziznejhad, Hojjat; Mohammadian, Mahdi; Salehiniya, Hamid

2016-01-01

The incidence and mortality estimates of ovarian cancer based on human development are essential for planning by policy makers. This study is aimed at investigating the standardised incidence rates (SIR) and standardised mortality rates (SMR) of ovarian cancer and their relationship with the Human Development Index (HDI) in Asian countries. This study was an ecologic study in Asia for assessment of the correlation between SIR, age standardised rates (ASR), and HDI and their details, including life expectancy at birth, mean years of schooling, and gross national income (GNI) per capita. We used the correlation bivariate method for assessment of the correlation between ASR and HDI, and its details. Statistical significance was assumed if P HDI and SIR (r = 0.143, p = 0.006). Correlation between SMR of ovarian cancer and HDI was not significant (r = 0.005, p = 052.0). According to the findings of this study, between the HDI and SIR, there was a positive correlation, but there was no correlation between the SMR and HDI.

Exposure scenario libraries as a tool for exposure assessment

International Nuclear Information System (INIS)

Jiménez, Araceli Sánchez; Rashid, Shahzad; Van Tongeren, Martie; Brouwer, Derk; Fransman, Wouter; Fito, Carlos; Boulougouris, George

2015-01-01

The development of nanotechnology has reached a point where it is being widely applied, and numerous nanomaterials and nano-enabled products are handled across a broad range of industrial sectors. Exposure extends beyond occupational settings as products containing nanomaterials are used by different consumer groups.Despite the knowledge on their toxic effects is growing there is still not OEL for most NMS and therefore the precautionary approach is still used where levels are kept as low as possible Therefore there is a need to assess workers and consumers exposure. (paper)

ASSESSING HUMAN EXPOSURE TO GRASS POLLEN IN DENMARK

DEFF Research Database (Denmark)

Peel, Robert George; Hertel, Ole; Herbert, Rob

Objectives: Exposure to pollen is typically assessed using data collected at fixed roof-top monitoring stations, which give a general picture of airborne pollen concentrations over a wide region. Actual exposure levels can be obtained through personal exposure monitoring. This is typically done u...

[Occupational exposure to nanoparticles. Assessment of workplace exposure].

Science.gov (United States)

Bujak-Pietrek, Stella

2010-01-01

Nanotechnology is currently one of the most popular branch of science. It is a technology that enables designing, manufacturing and application of materials and structures of very small dimensions, and its products are applied in almost every field of life. Nanoparticles are the structures having one or more dimensions of the order of 100 nm or less. They are used in precise mechanics, electronics, optics, medicine, pharmacy, cosmetics and many other spheres. Due to their very small size, nanostructures have completely different and specific properties, unknown for the bulk of materials. Fast-growing nanotechnology provides a wide spectrum of applications, but it also brings about new and unknown danger to human health. Nanotechnology is the branch that has developed rather recently, and much information about health risk and its influence on the environment is beyond our knowledge. Nanoparticles, released in many technological processes, as well as manufactured nanoparticles can induce occupational hazards to workers. The lack of regulations and standards, compulsory in the manufacture and use ofnanoparticles is a fundamental problem faced in the evaluation of exposure. Another problem is the choice of proper measurement equipment for surveying of very small particles - their number, mass and surface area in the workpost air. In this article, the possibility and scope of exposure assessment is discussed and a brief specification of available instrumentation for counting and assessing the parameters essential for classifying the exposure to nanoparticles is presented.

Variability and uncertainty in Swedish exposure factors for use in quantitative exposure assessments.

Science.gov (United States)

Filipsson, Monika; Öberg, Tomas; Bergbäck, Bo

2011-01-01

Information of exposure factors used in quantitative risk assessments has previously been compiled and reported for U.S. and European populations. However, due to the advancement of science and knowledge, these reports are in continuous need of updating with new data. Equally important is the change over time of many exposure factors related to both physiological characteristics and human behavior. Body weight, skin surface, time use, and dietary habits are some of the most obvious examples covered here. A wealth of data is available from literature not primarily gathered for the purpose of risk assessment. Here we review a number of key exposure factors and compare these factors between northern Europe--here represented by Sweden--and the United States. Many previous compilations of exposure factor data focus on interindividual variability and variability between sexes and age groups, while uncertainty is mainly dealt with in a qualitative way. In this article variability is assessed along with uncertainty. As estimates of central tendency and interindividual variability, mean, standard deviation, skewness, kurtosis, and multiple percentiles were calculated, while uncertainty was characterized using 95% confidence intervals for these parameters. The presented statistics are appropriate for use in deterministic analyses using point estimates for each input parameter as well as in probabilistic assessments. © 2010 Society for Risk Analysis.

Health impact assessment of air pollution using a dynamic exposure profile: Implications for exposure and health impact estimates

International Nuclear Information System (INIS)

Dhondt, Stijn; Beckx, Carolien; Degraeuwe, Bart; Lefebvre, Wouter; Kochan, Bruno; Bellemans, Tom; Int Panis, Luc; Macharis, Cathy; Putman, Koen

2012-01-01

In both ambient air pollution epidemiology and health impact assessment an accurate assessment of the population exposure is crucial. Although considerable advances have been made in assessing human exposure outdoors, the assessments often do not consider the impact of individual travel behavior on such exposures. Population-based exposures to NO 2 and O 3 using only home addresses were compared with models that integrate all time-activity patterns—including time in commute—for Flanders and Brussels. The exposure estimates were used to estimate the air pollution impact on years of life lost due to respiratory mortality. Health impact of NO 2 using an exposure that integrates time-activity information was on average 1.2% higher than when assuming that people are always at their home address. For ozone the overall estimated health impact was 0.8% lower. Local differences could be much larger, with estimates that differ up to 12% from the exposure using residential addresses only. Depending on age and gender, deviations from the population average were seen. Our results showed modest differences on a regional level. At the local level, however, time-activity patterns indicated larger differences in exposure and health impact estimates, mainly for people living in more rural areas. These results suggest that for local analyses the dynamic approach can contribute to an improved assessment of the health impact of various types of pollution and to the understanding of exposure differences between population groups. - Highlights: ► Exposure to ambient air pollution was assessed integrating population mobility. ► This dynamic exposure was integrated into a health impact assessment. ► Differences between the dynamic and residential exposure were quantified. ► Modest differences in health impact were found at a regional level. ► At municipal level larger differences were found, influenced by gender and age.

Advanced REACH tool: A Bayesian model for occupational exposure assessment

NARCIS (Netherlands)

McNally, K.; Warren, N.; Fransman, W.; Entink, R.K.; Schinkel, J.; Van Tongeren, M.; Cherrie, J.W.; Kromhout, H.; Schneider, T.; Tielemans, E.

2014-01-01

This paper describes a Bayesian model for the assessment of inhalation exposures in an occupational setting; the methodology underpins a freely available web-based application for exposure assessment, the Advanced REACH Tool (ART). The ART is a higher tier exposure tool that combines disparate

Assessing the risks from exposure to radon in dwellings

International Nuclear Information System (INIS)

Walsh, P.J.; Lowder, W.M.

1983-07-01

The factors used to assess the radiation dose and health risks from human exposure to radon in dwellings are critically reviewed in this summary. Sources of indoor radon and determinants of air concentrations and exposure levels are given as well as the uncertainties that exist in their formulation. Methods of assessing health effects from inhalation of radon and its progeny are discussed with emphasis on dosimetry of radon daughters and formulation of risk per dose values. Finally, methods of assessing risks for general population exposures to indoor radon concentrations are treated

Exposure assessment strategies for non-routine work operations (NORWO)

International Nuclear Information System (INIS)

Lew, V.; Cohen, J.; Chiusano, S.; McGann, C.; McLouth, L.

1993-09-01

The DOE Office of Health and Office of Safety and Health Oversight are collaborating to address special problems related to assessment of worker exposures associated with nonroutine work operations (NORWO), such as hazardous waste operations. Both off ices have formed a single working group of industrial hygiene specialists from the DOE, fts contractors, and other interested organizations which held its first meeting July 1993. The DOE Canter of Excellence for Exposure Assessment, maintained at Lawrence Livermore National Laboratory, is assisting in developing reasonable policies and guidance on exposure assessment strategies for NORWO. The DOE EA Center will research this subject to assist the DOE in formulating guidance documents for conduct of EA for NORWO that are consistent with the DOE draft EAS technical standard. This report presents an outline for a section on NORWO intended for inclusion in the DOE technical guidance documents for EAS and Hazardous Waste Operations Emergency Response (HAZWOPER) currently under development by the DOE Industrial Hygiene Division (EH-412), and EM-23. Also presented is a review of the July 21--23 meeting and a proposed workplan for developing NORWO exposure assessment procedures. Appendices include: (A) David Weitzman's memo on NORWO, (B) Draft annotated outline of the technical standard for the Assessment of Employee Exposure to Hazardous Chemical Agents, (C) ORC proposed EAS standard, (D) program for the October 31--November 3, 1993 ACGIH Conference on Occupational Exposure Databases, (E) agenda for the July 15, 1993 DOE meeting on NORWO, (F) viewgraphs used in formal presentations at this meeting, (G) Hanford Exposure Assessment Program Plan, and (H) a list of attendees and invitees to the July DOE -- NORWO meeting

Exposure monitoring and risk assessment of biphenyl in the workplace.

Science.gov (United States)

Kim, Hyeon-Yeong; Shin, Sae-Mi; Ham, Miran; Lim, Cheol-Hong; Byeon, Sang-Hoon

2015-05-13

This study was performed to assess exposure to and the risk caused by biphenyl in the workplace. Biphenyl is widely used as a heat transfer medium and as an emulsifier and polish in industry. Vapor or high levels of dust inhalation and dermal exposure to biphenyl can cause eye inflammation, irritation of respiratory organs, and permanent lesions in the liver and nervous system. In this study, the workplace environment concentrations were assessed as central tendency exposure and reasonable maximum exposure and were shown to be 0.03 and 0.12 mg/m³, respectively. In addition, the carcinogenic risk of biphenyl as determined by risk assessment was 0.14 × 10⁻⁴ (central tendency exposure) and 0.56 × 10⁻⁴ (reasonable maximum exposure), which is below the acceptable risk value of 1.0 × 10⁻⁴. Furthermore, the central tendency exposure and reasonable maximum exposure hazard quotients were 0.01 and 0.06 for oral toxicity, 0.05 and 0.23 for inhalation toxicity, and 0.08 and 0.39 for reproduction toxicity, respectively, which are all lower than the acceptable hazard quotient of 1.0. Therefore, exposure to biphenyl was found to be safe in current workplace environments. Because occupational exposure limits are based on socioeconomic assessment, they are generally higher than true values seen in toxicity experiments. Based on the results of exposure monitoring of biphenyl, the current occupational exposure limits in Korea could be reviewed.

Exposure Monitoring and Risk Assessment of Biphenyl in the Workplace

Directory of Open Access Journals (Sweden)

Hyeon-Yeong Kim

2015-05-01

Full Text Available This study was performed to assess exposure to and the risk caused by biphenyl in the workplace. Biphenyl is widely used as a heat transfer medium and as an emulsifier and polish in industry. Vapor or high levels of dust inhalation and dermal exposure to biphenyl can cause eye inflammation, irritation of respiratory organs, and permanent lesions in the liver and nervous system. In this study, the workplace environment concentrations were assessed as central tendency exposure and reasonable maximum exposure and were shown to be 0.03 and 0.12 mg/m3, respectively. In addition, the carcinogenic risk of biphenyl as determined by risk assessment was 0.14 × 10−4 (central tendency exposure and 0.56 × 10−4 (reasonable maximum exposure, which is below the acceptable risk value of 1.0 × 10−4. Furthermore, the central tendency exposure and reasonable maximum exposure hazard quotients were 0.01 and 0.06 for oral toxicity, 0.05 and 0.23 for inhalation toxicity, and 0.08 and 0.39 for reproduction toxicity, respectively, which are all lower than the acceptable hazard quotient of 1.0. Therefore, exposure to biphenyl was found to be safe in current workplace environments. Because occupational exposure limits are based on socioeconomic assessment, they are generally higher than true values seen in toxicity experiments. Based on the results of exposure monitoring of biphenyl, the current occupational exposure limits in Korea could be reviewed.

Exposure assessment of process-related contaminants in food by biomarker monitoring.

Science.gov (United States)

Rietjens, Ivonne M C M; Dussort, P; Günther, Helmut; Hanlon, Paul; Honda, Hiroshi; Mally, Angela; O'Hagan, Sue; Scholz, Gabriele; Seidel, Albrecht; Swenberg, James; Teeguarden, Justin; Eisenbrand, Gerhard

2018-01-01

Exposure assessment is a fundamental part of the risk assessment paradigm, but can often present a number of challenges and uncertainties. This is especially the case for process contaminants formed during the processing, e.g. heating of food, since they are in part highly reactive and/or volatile, thus making exposure assessment by analysing contents in food unreliable. New approaches are therefore required to accurately assess consumer exposure and thus better inform the risk assessment. Such novel approaches may include the use of biomarkers, physiologically based kinetic (PBK) modelling-facilitated reverse dosimetry, and/or duplicate diet studies. This review focuses on the state of the art with respect to the use of biomarkers of exposure for the process contaminants acrylamide, 3-MCPD esters, glycidyl esters, furan and acrolein. From the overview presented, it becomes clear that the field of assessing human exposure to process-related contaminants in food by biomarker monitoring is promising and strongly developing. The current state of the art as well as the existing data gaps and challenges for the future were defined. They include (1) using PBK modelling and duplicate diet studies to establish, preferably in humans, correlations between external exposure and biomarkers; (2) elucidation of the possible endogenous formation of the process-related contaminants and the resulting biomarker levels; (3) the influence of inter-individual variations and how to include that in the biomarker-based exposure predictions; (4) the correction for confounding factors; (5) the value of the different biomarkers in relation to exposure scenario's and risk assessment, and (6) the possibilities of novel methodologies. In spite of these challenges it can be concluded that biomarker-based exposure assessment provides a unique opportunity to more accurately assess consumer exposure to process-related contaminants in food and thus to better inform risk assessment.

Non-ionizing electromagnetic exposure assessment and dosimetry

International Nuclear Information System (INIS)

Paulsson, L.E.

1992-11-01

A comprehensive literature survey of advancements in the area 'human exposure assessment and dosimetry' for the years 1988-1992 has been performed by the author and published elsewhere. In the present report that material has been complemented with a historical background and a thorough description of the physical principles behind the methods and techniques. The report covers strategies, principles, methods, limitations and future developments for the area of human exposure assessment and dosimetry of electromagnetic fields form extremely low frequencies up to and including microwaves

DREAM: a method for semi-quantitative dermal exposure assessment

NARCIS (Netherlands)

Wendel de Joode, B. van; Brouwer, D.H.; Kromhout, H.; Hemmen, J.J. van

2003-01-01

This paper describes a new method (DREAM) for structured, semi-quantitative dermal exposure assessment for chemical or biological agents that can be used in occupational hygiene or epidemiology. It is anticipated that DREAM could serve as an initial assessment of dermal exposure, amongst others,

Exposure assessment of tetrafluoroethylene and ammonium perfluorooctanoate 1951-2002.

Science.gov (United States)

Sleeuwenhoek, Anne; Cherrie, John W

2012-03-01

To develop a method to reconstruct exposure to tetrafluoroethylene (TFE) and ammonium perfluorooctanoate (APFO) in plants producing polytetrafluoroethylene (PTFE) in the absence of suitable objective measurements. These data were used to inform an epidemiological study being carried out to investigate possible risks in workers employed in the manufacture of PTFE and to study trends in exposure over time. For each plant, detailed descriptions of all occupational titles, including tasks and changes over time, were obtained during semi-structured interviews with key plant personnel. A semi-quantitative assessment method was used to assess inhalation exposure to TFE and inhalation plus dermal exposure to APFO. Temporal trends in exposure to TFE and APFO were investigated. In each plant the highest exposures for both TFE and APFO occurred in the polymerisation area. Due to the introduction of control measures, increasing process automation and other improvements, exposures generally decreased over time. In the polymerisation area, the annual decline in exposure to TFE varied by plant from 3.8 to 5.7% and for APFO from 2.2 to 5.5%. A simple method for assessing exposure was developed which used detailed process information and job descriptions to estimate average annual TFE and APFO exposure on an arbitrary semi-quantitative scale. These semi-quantitative estimates are sufficient to identify relative differences in exposure for the epidemiological study and should good data become available, they could be used to provide quantitative estimates for all plants across the whole period of operation. This journal is © The Royal Society of Chemistry 2012

Health impact assessment of air pollution using a dynamic exposure profile: Implications for exposure and health impact estimates

Energy Technology Data Exchange (ETDEWEB)

Dhondt, Stijn, E-mail: stijn.dhondt@vub.ac.be [Department of Medical Sociology and Health Sciences, Vrije Universiteit Brussel, Laarbeeklaan 103, B-1090, Brussels (Belgium); Beckx, Carolien, E-mail: Carolien.Beckx@vito.be [Flemish Institute for Technological Research (VITO), Boeretang 200, 2400 Mol (Belgium); Degraeuwe, Bart, E-mail: Bart.Degraeuwe@vito.be [Flemish Institute for Technological Research (VITO), Boeretang 200, 2400 Mol (Belgium); Lefebvre, Wouter, E-mail: Wouter.Lefebvre@vito.be [Flemish Institute for Technological Research (VITO), Boeretang 200, 2400 Mol (Belgium); Kochan, Bruno, E-mail: Bruno.Kochan@uhasselt.be [Transportation Research Institute, Hasselt University, Wetenschapspark 5 bus 6, 3590 Diepenbeek (Belgium); Bellemans, Tom, E-mail: Tom.Bellemans@uhasselt.be [Transportation Research Institute, Hasselt University, Wetenschapspark 5 bus 6, 3590 Diepenbeek (Belgium); Int Panis, Luc, E-mail: Luc.intpanis@vito.be [Flemish Institute for Technological Research (VITO), Boeretang 200, 2400 Mol (Belgium); Transportation Research Institute, Hasselt University, Wetenschapspark 5 bus 6, 3590 Diepenbeek (Belgium); Macharis, Cathy, E-mail: cjmachar@vub.ac.be [Department MOSI-Transport and Logistics, Vrije Universiteit Brussel, Pleinlaan 2, B-1050, Brussels (Belgium); Putman, Koen, E-mail: kputman@vub.ac.be [Department of Medical Sociology and Health Sciences, Vrije Universiteit Brussel, Laarbeeklaan 103, B-1090, Brussels (Belgium); Interuniversity Centre for Health Economics Research (I-CHER), Vrije Universiteit Brussel, Brussels (Belgium)

2012-09-15

In both ambient air pollution epidemiology and health impact assessment an accurate assessment of the population exposure is crucial. Although considerable advances have been made in assessing human exposure outdoors, the assessments often do not consider the impact of individual travel behavior on such exposures. Population-based exposures to NO{sub 2} and O{sub 3} using only home addresses were compared with models that integrate all time-activity patterns-including time in commute-for Flanders and Brussels. The exposure estimates were used to estimate the air pollution impact on years of life lost due to respiratory mortality. Health impact of NO{sub 2} using an exposure that integrates time-activity information was on average 1.2% higher than when assuming that people are always at their home address. For ozone the overall estimated health impact was 0.8% lower. Local differences could be much larger, with estimates that differ up to 12% from the exposure using residential addresses only. Depending on age and gender, deviations from the population average were seen. Our results showed modest differences on a regional level. At the local level, however, time-activity patterns indicated larger differences in exposure and health impact estimates, mainly for people living in more rural areas. These results suggest that for local analyses the dynamic approach can contribute to an improved assessment of the health impact of various types of pollution and to the understanding of exposure differences between population groups. - Highlights: Black-Right-Pointing-Pointer Exposure to ambient air pollution was assessed integrating population mobility. Black-Right-Pointing-Pointer This dynamic exposure was integrated into a health impact assessment. Black-Right-Pointing-Pointer Differences between the dynamic and residential exposure were quantified. Black-Right-Pointing-Pointer Modest differences in health impact were found at a regional level. Black

Assessment of risk of potential exposures on facilities industries

International Nuclear Information System (INIS)

Leocadio, Joao Carlos

2007-03-01

This work develops a model to evaluate potential exposures on open facilities of industrial radiography in Brazil. This model will decisively contribute to optimize operational, radiological protection and safety procedures, to prevent radiation accidents and to reduce human errors in industrial radiography. The probabilistic safety assessment (PSA) methodology was very useful to assess potential exposures. The open facilities of industrial radiography were identified as the scenario to be analyzed in what concerns the evaluation of potential exposures, due to their high accidents indices. The results of the assessment of potential exposures confirm that the industrial radiography in Brazil is a high-risk practice as classified by the IAEA. The risk of potential exposure was estimated to be 40,5 x 10 -2 per year in Brazil, having as main consequences injuries to the workers' hands and arms. In the world scene, the consequences are worst, leading to fatalities of people, thus emphasizing the high risk of industrial radiography. (author)

Integration of Probabilistic Exposure Assessment and Probabilistic Hazard Characterization

NARCIS (Netherlands)

Voet, van der H.; Slob, W.

2007-01-01

A method is proposed for integrated probabilistic risk assessment where exposure assessment and hazard characterization are both included in a probabilistic way. The aim is to specify the probability that a random individual from a defined (sub)population will have an exposure high enough to cause a

Quantifying human exposure to air pollution - moving from static monitoring to spatio-temporally resolved personal exposure assessment

DEFF Research Database (Denmark)

Steinle, Susanne; Reis, Stefan; Sabel, Clive E

2013-01-01

exposure studies to accurately assess human health risks. ? We discuss potential and shortcomings of methods and tools with a focus on how their development influences study design. ? We propose a novel conceptual model for integrated health impact assessment of human exposure to air pollutants. ? We......Quantifying human exposure to air pollutants is a challenging task. Ambient concentrations of air pollutants at potentially harmful levels are ubiquitous in urban areas and subject to high spatial and temporal variability. At the same time, every individual has unique activity-patterns. Exposure...... results from multifaceted relationships and interactions between environmental and human systems, adding complexity to the assessment process. Traditionally, approaches to quantify human exposure have relied on pollutant concentrations from fixed air quality network sites and static population...

Cea-Expo: A facility exposure matrix to assess passed exposure to chemical carcinogens and radionuclides of nuclear workers

International Nuclear Information System (INIS)

Telle-Lamberton, M.; Bouville, P.; Bergot, D.; Gagneau, M.; Marot, S.; Telle-Lamberton, M.; Giraud, J.M.; Gelas, J.M.

2005-01-01

A 'Facility-Exposure Matrix' (FEM) is proposed to assess exposure to chemical carcinogens and radionuclides in a cohort of nuclear workers. Exposures are to be attributed in the following way: a worker reports to an administrative unit and/or is monitored for exposure to ionising radiation in a specific workplace. These units are connected with a list of facilities for which exposure is assessed through a group of experts. The entire process of the FEM applied in one of the nuclear centres included in the study shows that the FEM is feasible: exposure durations as well as groups of correlated exposures are presented but have to be considered as possible rather than positive exposures. Considering the number of facilities to assess (330), ways to simplify the method are proposed: (i) the list of exposures will be restricted to 18 chemical products retained from an extensive bibliography study; (ii) for each of the following classes of facilities: nuclear reactors, fuel fabrication, high-activity laboratories and radiation chemistry, accelerators and irradiators, waste treatment, biology, reprocessing, fusion, occupational exposure will be deduced from the information already gathered by the initial method. Besides taking into account confusion factors in the low doses epidemiological study of nuclear workers, the matrix should help in the assessment of internal contamination and chemical exposures in the nuclear industry. (author)

Assessment of exposure dose to workers in virtual decommissioning environments

International Nuclear Information System (INIS)

Jeong, KwanSeong; Moon, JeiKwon; Choi, ByungSeon; Hyun, Dongjun; Lee, Jonghwan; Kim, Ikjune; Kim, GeunHo; Seo, JaeSeok

2014-01-01

This paper is intended to suggest the method analyze and assess the exposure dose to workers in virtual decommissioning environments. To simulate a lot of decommissioning scenarios, decommissioning environments were designed in virtual reality. To simulate and assess the exposure dose to workers, human model also was designed in virtual environments. These virtual decommissioning environments made it possible to real-time simulate and assess the exposure dose to workers. This work was to be able to simulate scenarios of decommissioning so that exposure dose to workers could be measured and assessed. To establish the plan of exposure dose to workers during decommissioning of nuclear facilities before decommissioning activities are accomplished, the method of simulation assessment was developed in virtual radiological environments. But this work was developed as a tool of simulation for single subject mode. Afterwards, the simulation environment for multi-subjects mode will be upgraded by simultaneous modules with networking environments. Then the much more practical method will be developed by changing number of workers and duration of time under any circumstances of decommissioning

Assessment of exposure dose to workers in virtual decommissioning environments

Energy Technology Data Exchange (ETDEWEB)

Jeong, KwanSeong; Moon, JeiKwon; Choi, ByungSeon; Hyun, Dongjun; Lee, Jonghwan; Kim, Ikjune; Kim, GeunHo; Seo, JaeSeok [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-10-15

This paper is intended to suggest the method analyze and assess the exposure dose to workers in virtual decommissioning environments. To simulate a lot of decommissioning scenarios, decommissioning environments were designed in virtual reality. To simulate and assess the exposure dose to workers, human model also was designed in virtual environments. These virtual decommissioning environments made it possible to real-time simulate and assess the exposure dose to workers. This work was to be able to simulate scenarios of decommissioning so that exposure dose to workers could be measured and assessed. To establish the plan of exposure dose to workers during decommissioning of nuclear facilities before decommissioning activities are accomplished, the method of simulation assessment was developed in virtual radiological environments. But this work was developed as a tool of simulation for single subject mode. Afterwards, the simulation environment for multi-subjects mode will be upgraded by simultaneous modules with networking environments. Then the much more practical method will be developed by changing number of workers and duration of time under any circumstances of decommissioning.

Probabilistic assessment of wildfire hazard and municipal watershed exposure

Science.gov (United States)

Joe Scott; Don Helmbrecht; Matthew P. Thompson; David E. Calkin; Kate Marcille

2012-01-01

The occurrence of wildfires within municipal watersheds can result in significant impacts to water quality and ultimately human health and safety. In this paper, we illustrate the application of geospatial analysis and burn probability modeling to assess the exposure of municipal watersheds to wildfire. Our assessment of wildfire exposure consists of two primary...

Whole-body CT for lymphoma staging: Feasibility of halving radiation dose and risk by iterative image reconstruction

Energy Technology Data Exchange (ETDEWEB)

Meyer, M., E-mail: mathias.meyer@medma.uni-heidelberg.de [Institute of Clinical Radiology and Nuclear Medicine, University Medical Center Mannheim, Medical Faculty Mannheim, Heidelberg University, Theodor-Kutzer-Ufer 1-3, D-68167 Mannheim (Germany); Klein, S.A., E-mail: stefan.klein@umm.de [Department of Hematology and Oncology, University Medical Center Mannheim, Medical Faculty Mannheim, Heidelberg University, Theodor-Kutzer-Ufer 1-3, D-68167 Mannheim (Germany); Brix, G., E-mail: gbrix@bfs.de [Department of Medical and Occupational Radiation Protection, Federal Office for Radiation Protection, Ingolstädter Landstraße 1, D-85764 Neuherberg (Germany); Fink, C., E-mail: Christian.Fink@medma.uni-heidelberg.de [Institute of Clinical Radiology and Nuclear Medicine, University Medical Center Mannheim, Medical Faculty Mannheim, Heidelberg University, Theodor-Kutzer-Ufer 1-3, D-68167 Mannheim (Germany); Pilz, L., E-mail: lothar.pilz@medma.uni-heidelberg.de [Department of Biostatistics, University Medical Center Mannheim, Medical Faculty Mannheim, Heidelberg University, Theodor-Kutzer-Ufer 1-3, D-68167 Mannheim (Germany); Jafarov, H., E-mail: Hashim.Jafarov@umm.de [Institute of Clinical Radiology and Nuclear Medicine, University Medical Center Mannheim, Medical Faculty Mannheim, Heidelberg University, Theodor-Kutzer-Ufer 1-3, D-68167 Mannheim (Germany); Hofmann, W.K., E-mail: w.k.hofmann@umm.de [Department of Hematology and Oncology, University Medical Center Mannheim, Medical Faculty Mannheim, Heidelberg University, Theodor-Kutzer-Ufer 1-3, D-68167 Mannheim (Germany); Schoenberg, S.O., E-mail: Stefan.Schoenberg@umm.de [Institute of Clinical Radiology and Nuclear Medicine, University Medical Center Mannheim, Medical Faculty Mannheim, Heidelberg University, Theodor-Kutzer-Ufer 1-3, D-68167 Mannheim (Germany); and others

2014-02-15

Objectives: Patients with lymphoma are at higher-risk of secondary malignancies mainly due to effects of cancer therapy as well as frequent radiological surveillance. We thus aimed to investigate the objective and subjective image quality as well as radiation exposure and risk of full-dose standard (FDS), full-dose iterative (FDI), and half-dose iterative (HDI) image reconstruction in patients with lymphoma. Material and methods: In 100 lymphoma patients, contrast-enhanced whole-body staging was performed on a dual-source CT. To acquire full-dose and half-dose CT data simultaneously, the total current-time product was equally distributed on both tubes operating at 120 kV. HDI reconstructions were calculated by using only data from one tube. Quantitative image quality was assessed by measuring image noise in different tissues of the neck, thorax, and abdomen. Overall diagnostic image quality was assessed using a 5-point Likert scale. Radiation doses and risks were estimated for a male and female reference person. Results: For all anatomical regions apart from the lungs image noise was significantly lower and the overall subjective image quality significantly better when using FDI and HDI instead of FDS reconstruction (p < 0.05). For the half-dose protocol, the risk to develop a radiation-induced cancer was estimated to be less than 0.11/0.19% for an adult male/female. Conclusions: Image quality of FDI and more importantly of HDI is superior to FDS reconstruction, thus enabling to halve radiation dose and risk to lymphoma patients.

The assessment of the aircrew exposure

International Nuclear Information System (INIS)

Tommasino, L.

2002-01-01

In 1991 ICRP first included exposure of aircraft crew to cosmic radiation as occupational exposure. The European Dosimetry Group (EURADOS) established a working group in 1992 to address this issue. The report 'Exposure of Air Crew to Cosmic Radiation' was published in the European Commission's Radiation Protection series as report 85. The first section of the report assesses the existing data on radiation exposure, describes the radiation environment at civil aviation altitudes and summarizes the computational models that have been developed to describe the cosmic ray radiation field in the atmosphere. The second section describes the quantities used to assess the radiation doses. It is clear that conventional radiation protection dosimetry as applied on the ground is not quite applicable to the situation for air crews. A multinational European research project was launched to investigate the problem of cosmic rays and dosimetry at aviation altitudes. The major objective was to measure the flux and energy spectra of neutrons and charged particles over a wide energy interval at aviation altitudes and compare the results with those calculated with various computer codes. Within the project much progress was made in different areas, for instance the determination of the fundamental physical characteristics of the cosmic radiation field at aircraft altitudes, development of instrumentation, measurements of dose rates and route doses and application of routine radiation protection. Surveys of air crew exposure have been carried out with different advanced dosimetric systems and comparisons were made between passive and real-time detector systems

The Future of Exposure Assessment: Perspectives from the ...

Science.gov (United States)

The British Occupational Hygiene Society, in collaboration with the Institute of Occupational Medicine, the University of Manchester, the UK Health and Safety Executive, and the University of Aberdeen hosted the 7th International Conference on the Science of Exposure Assessment (X2012) on 2 July–5 July 2012 in Edinburgh, UK. The conference ended with a special session at which invited speakers from government, industry, independent research institutes, and academia were asked to reflect on the conference and discuss what may now constitute the important highlights or drivers of future exposure assessment research. This article summarizes these discussions with respect to current and future technical and methodological developments. For the exposure science community to continue to have an impact in protecting public health, additional efforts need to be made to improve partnerships and cross-disciplinary collaborations, although it is equally important to ensure that the traditional occupational exposure themes are still covered as these issues are becoming increasingly important in the developing world. To facilitate this the ‘X’ conferences should continue to retain a holistic approach to occupational and non-occupational exposures and should actively pursue collaborations with other disciplines and professional organizations to increase the presence of consumer and environmental exposure scientists. The National Exposure Research Laboratory′s (NERL′

Quantitative self-assessment of exposure to solvents among shoe repair men

NARCIS (Netherlands)

Hertsenberg, S.; Brouwer, D.; Lurvink, M.; Rubingh, C.; Rijnders, E.; Tielemans, E.

2007-01-01

Self-assessment of exposure (SAE) refers to any exposure assessment methodology wherein the worker takes an active role in establishing his or her exposure status. The objective of this study was to investigate the reliability and feasibility of SAE approaches among shoe repair workers collecting

Technical Overview of Ecological Risk Assessment - Analysis Phase: Exposure Characterization

Science.gov (United States)

Exposure Characterization is the second major component of the analysis phase of a risk assessment. For a pesticide risk assessment, the exposure characterization describes the potential or actual contact of a pesticide with a plant, animal, or media.

Spatial and Temporal Dynamics in Air Pollution Exposure Assessment

Science.gov (United States)

Dias, Daniela; Tchepel, Oxana

2018-01-01

Analyzing individual exposure in urban areas offers several challenges where both the individual’s activities and air pollution levels demonstrate a large degree of spatial and temporal dynamics. This review article discusses the concepts, key elements, current developments in assessing personal exposure to urban air pollution (seventy-two studies reviewed) and respective advantages and disadvantages. A new conceptual structure to organize personal exposure assessment methods is proposed according to two classification criteria: (i) spatial-temporal variations of individuals’ activities (point-fixed or trajectory based) and (ii) characterization of air quality (variable or uniform). This review suggests that the spatial and temporal variability of urban air pollution levels in combination with indoor exposures and individual’s time-activity patterns are key elements of personal exposure assessment. In the literature review, the majority of revised studies (44 studies) indicate that the trajectory based with variable air quality approach provides a promising framework for tackling the important question of inter- and intra-variability of individual exposure. However, future quantitative comparison between the different approaches should be performed, and the selection of the most appropriate approach for exposure quantification should take into account the purpose of the health study. This review provides a structured basis for the intercomparing of different methodologies and to make their advantages and limitations more transparent in addressing specific research objectives. PMID:29558426

Assessment of inhomogeneous ELF magnetic field exposures

International Nuclear Information System (INIS)

Leitgeb, N.; Cech, R.; Schroettner, J.

2008-01-01

In daily life as well as at workplaces, exposures to inhomogeneous magnetic fields become very frequent. This makes easily applicable compliance assessment methods increasingly important. Reference levels have been defined linking basic restrictions to levels of homogeneous fields at worst-case exposure conditions. If reference levels are met, compliance with basic restrictions can be assumed. If not, further investigations could still prove compliance. Because of the lower induction efficiency, inhomogeneous magnetic fields such as from electric appliances could be allowed exceeding reference levels. To easily assess inhomogeneous magnetic fields, a quick and flexible multi-step assessment procedure is proposed. On the basis of simulations with numerical, anatomical human models reference factors were calculated elevating reference levels to link hot-spot values measured at source surfaces to basic limits and allowing accounting for different source distance, size, orientation and position. Compliance rules are proposed minimising assessment efforts. (authors)

Standardizing measurement, sampling and reporting for public exposure assessments

Energy Technology Data Exchange (ETDEWEB)

Rochedo, Elaine R.R. [Instituto de Radioprotecao e Dosimetria, Comissao Nacional de Energia Nuclear, Av. Salvador Allende s/No. CEP 22780-160 Rio de Janeiro, RJ (Brazil)], E-mail: elaine@ird.gov.br

2008-11-15

UNSCEAR assesses worldwide public exposure from natural and man-made sources of ionizing radiation based on information submitted to UNSCEAR by United Nations Member States and from peer reviewed scientific literature. These assessments are used as a basis for radiation protection programs of international and national regulatory and research organizations. Although UNSCEAR describes its assessment methodologies, the data are based on various monitoring approaches. In order to reduce uncertainties and improve confidence in public exposure assessments, it would be necessary to harmonize the methodologies used for sampling, measuring and reporting of environmental results.

A structured observational method to assess dermal exposure to manufactured nanoparticles: DREAM as an initial assessment tool

NARCIS (Netherlands)

Duuren-Stuurman, B. van; Pelzer, J.; Moehlmann, C.; Berges, M.; Bard, D.; Wake, D.; Mark, D.; Jankowska, E.; Brouwer, D.

2010-01-01

Preliminary results of inventories of exposure scenarios for nanomaterials have indicated possible dermal exposure. Within the NANOSH project focused on occupational safety and health aspects of nanotechnology a shortened version of the observational DeRmal Exposure AssessMent (DREAM) method was

Task-based exposure assessment of nanoparticles in the workplace

International Nuclear Information System (INIS)

Ham, Seunghon; Yoon, Chungsik; Lee, Euiseung; Lee, Kiyoung; Park, Donguk; Chung, Eunkyo; Kim, Pilje; Lee, Byoungcheun

2012-01-01

Although task-based sampling is, theoretically, a plausible approach to the assessment of nanoparticle exposure, few studies using this type of sampling have been published. This study characterized and compared task-based nanoparticle exposure profiles for engineered nanoparticle manufacturing workplaces (ENMW) and workplaces that generated welding fumes containing incidental nanoparticles. Two ENMW and two welding workplaces were selected for exposure assessments. Real-time devices were utilized to characterize the concentration profiles and size distributions of airborne nanoparticles. Filter-based sampling was performed to measure time-weighted average (TWA) concentrations, and off-line analysis was performed using an electron microscope. Workplace tasks were recorded by researchers to determine the concentration profiles associated with particular tasks/events. This study demonstrated that exposure profiles differ greatly in terms of concentrations and size distributions according to the task performed. The size distributions recorded during tasks were different from both those recorded during periods with no activity and from the background. The airborne concentration profiles of the nanoparticles varied according to not only the type of workplace but also the concentration metrics. The concentrations measured by surface area and the number concentrations measured by condensation particle counter, particulate matter 1.0, and TWA mass concentrations all showed a similar pattern, whereas the number concentrations measured by scanning mobility particle sizer indicated that the welding fume concentrations at one of the welding workplaces were unexpectedly higher than were those at workplaces that were engineering nanoparticles. This study suggests that a task-based exposure assessment can provide useful information regarding the exposure profiles of nanoparticles and can therefore be used as an exposure assessment tool.

Biodegradation kinetics for pesticide exposure assessment.

Science.gov (United States)

Wolt, J D; Nelson, H P; Cleveland, C B; van Wesenbeeck, I J

2001-01-01

Understanding pesticide risks requires characterizing pesticide exposure within the environment in a manner that can be broadly generalized across widely varied conditions of use. The coupled processes of sorption and soil degradation are especially important for understanding the potential environmental exposure of pesticides. The data obtained from degradation studies are inherently variable and, when limited in extent, lend uncertainty to exposure characterization and risk assessment. Pesticide decline in soils reflects dynamically coupled processes of sorption and degradation that add complexity to the treatment of soil biodegradation data from a kinetic perspective. Additional complexity arises from study design limitations that may not fully account for the decline in microbial activity of test systems, or that may be inadequate for considerations of all potential dissipation routes for a given pesticide. Accordingly, kinetic treatment of data must accommodate a variety of differing approaches starting with very simple assumptions as to reaction dynamics and extending to more involved treatments if warranted by the available experimental data. Selection of the appropriate kinetic model to describe pesticide degradation should rely on statistical evaluation of the data fit to ensure that the models used are not overparameterized. Recognizing the effects of experimental conditions and methods for kinetic treatment of degradation data is critical for making appropriate comparisons among pesticide biodegradation data sets. Assessment of variability in soil half-life among soils is uncertain because for many pesticides the data on soil degradation rate are limited to one or two soils. Reasonable upper-bound estimates of soil half-life are necessary in risk assessment so that estimated environmental concentrations can be developed from exposure models. Thus, an understanding of the variable and uncertain distribution of soil half-lives in the environment is

Addressing bystander exposure to agricultural pesticides in life cycle impact assessment

DEFF Research Database (Denmark)

Ryberg, Morten Walbech; Rosenbaum, Ralph K.; Mosqueron, Luc

2018-01-01

Residents living near agricultural fields may be exposed to pesticides drifting from the fields after application to different field crops. To address this currently missing exposure pathway in life cycle assessment (LCA), we developed a modeling framework for quantifying exposure of bystanders...... magnitude of individual bystanders can be substantially larger than the exposure of populations not living in the proximity to agricultural fields. Our framework for assessing bystander exposure to pesticide applications closes a relevant gap in the exposure assessment included in LCA for agricultural...... to pesticide spray drift from agricultural fields. Our framework consists of three parts addressing: (1) loss of pesticides from an agricultural field via spray drift; (2) environmental fate of pesticide in air outside of the treated field; and (3) exposure of bystanders to pesticides via inhalation...

An approach for assessing human exposures to chemical mixtures in the environment

International Nuclear Information System (INIS)

Rice, Glenn; MacDonell, Margaret; Hertzberg, Richard C.; Teuschler, Linda; Picel, Kurt; Butler, Jim; Chang, Young-Soo; Hartmann, Heidi

2008-01-01

Humans are exposed daily to multiple chemicals, including incidental exposures to complex chemical mixtures released into the environment and to combinations of chemicals that already co-exist in the environment because of previous releases from various sources. Exposures to chemical mixtures can occur through multiple pathways and across multiple routes. In this paper, we propose an iterative approach for assessing exposures to environmental chemical mixtures; it is similar to single-chemical approaches. Our approach encompasses two elements of the Risk Assessment Paradigm: Problem Formulation and Exposure Assessment. Multiple phases of the assessment occur in each element of the paradigm. During Problem Formulation, analysts identify and characterize the source(s) of the chemical mixture, ensure that dose-response and exposure assessment measures are concordant, and develop a preliminary evaluation of the mixture's fate. During Exposure Assessment, analysts evaluate the fate of the chemicals comprising the mixture using appropriate models and measurement data, characterize the exposure scenario, and estimate human exposure to the mixture. We also describe the utility of grouping the chemicals to be analyzed based on both physical-chemical properties and an understanding of environmental fate. In the article, we also highlight the need for understanding of changes in the mixture composition in the environment due to differential transport, differential degradation, and differential partitioning to other media. The section describes the application of the method to various chemical mixtures, highlighting issues associated with assessing exposures to chemical mixtures in the environment

Assessment of Industrial Exposure to Magnetic Fields (invited paper)

International Nuclear Information System (INIS)

Chadwick, P.

1999-01-01

Magnetic field strengths produced by industrial processes can be very large, but they often exhibit a marked spatial variation. Whilst there may be the potential for exposures of workers to be high, actual exposure will be determined to a great extent by working practices. Possible metrics for epidemiological studies might be based on the temporal variability of exposure as well as maximum operator exposure or time-weighted average exposure and, whilst it might be possible to estimate these quantities from spot magnetic field strength measurements and observed working practices, this might be very difficult to achieve in practice. An alternative would be the use of a logging dosemeter: this paper describes some of the results of exposure assessments carried out in industrial environments with a modified EMDEX II magnetic field dosemeter. Magnetic fields in industrial environments often have waveforms which are not purely sinusoidal. Distortion can be introduced by the magnetic saturation of transformer and motor cores, by rectification, by poor matching between oscillator circuits and loads and when thyristors are used to control power. The resulting repetitive but non-sinusoidal magnetic field waveforms can be recorded and analysed; the spectral data may be incorporated into possible exposure metrics. It is also important to ensure that measurement instrumentation is responding appropriately in a non-sinusoidal field and this can only be done if the spectral content of the field is characterised fully. Some non-sinusoidal magnetic field waveforms cannot be expressed as a harmonic series. Specialist instrumentation and techniques are needed to assess exposure to such fields. Examples of approaches to the assessment of exposure to repetitive and non-repetitive magnetic fields are also discussed. (author)

Instruments to assess and measure personal and environmental radiofrequency-electromagnetic field exposures.

Science.gov (United States)

Bhatt, Chhavi Raj; Redmayne, Mary; Abramson, Michael J; Benke, Geza

2016-03-01

Radiofrequency-electromagnetic field (RF-EMF) exposure of human populations is increasing due to the widespread use of mobile phones and other telecommunication and broadcasting technologies. There are ongoing concerns about potential short- and long-term public health consequences from RF-EMF exposures. To elucidate the RF-EMF exposure-effect relationships, an objective evaluation of the exposures with robust assessment tools is necessary. This review discusses and compares currently available RF-EMF exposure assessment instruments, which can be used in human epidemiological studies. Quantitative assessment instruments are either mobile phone-based (apps/software-modified and hardware-modified) or exposimeters. Each of these tool has its usefulness and limitations. Our review suggests that assessment of RF-EMF exposures can be improved by using these tools compared to the proxy measures of exposure (e.g. questionnaires and billing records). This in turn, could be used to help increase knowledge about RF-EMF exposure induced health effects in human populations.

Instruments to assess and measure personal and environmental radiofrequency-electromagnetic field exposures

International Nuclear Information System (INIS)

Bhatt, Chhavi R.; Redmayne, Mary; Abramson, Michael J.; Benke, Geza

2016-01-01

Radiofrequency-electromagnetic field (RF-EMF) exposure of human populations is increasing due to the widespread use of mobile phones and other telecommunication and broadcasting technologies. There are ongoing concerns about potential short- and long-term public health consequences from RF-EMF exposures. To elucidate the RF-EMF exposure-effect relationships, an objective evaluation of the exposures with robust assessment tools is necessary. This review discusses and compares currently available RF-EMF exposure assessment instruments, which can be used in human epidemiological studies. Quantitative assessment instruments are either mobile phone-based (apps/software-modified and hardware-modified) or exposimeters. Each of these tool has its usefulness and limitations. Our review suggests that assessment of RF-EMF exposures can be improved by using these tools compared to the proxy measures of exposure (e.g. questionnaires and billing records). This in turn, could be used to help increase knowledge about RF-EMF exposure induced health effects in human populations.

Existing Default Values and Recommendations for Exposure Assessment - A Nordic Exposure Group Project 2011

DEFF Research Database (Denmark)

Höglund, Lena; Räisänen, Jouni; Hämäläinen, Anne-Maija

range of more or less well-documented values originating from many different sources. The purpose of this report is to give an overview and to evaluate exposure factors that are currently used by the authorities and industry in the exposure assessments for both adults (occupational and consumer exposure......) and children in relation to REACH. Another important purpose of the report is to contribute towards a further harmonisation of exposure factors by giving recommendations of most valid and representative defaults. These recommendations can be used besides REACH also in biocide's and plant protection product...

Retrospective internal radiation exposure assessment in occupational epidemiology

International Nuclear Information System (INIS)

Neton, J.W.; Flora, J.T.; Spitz, H.B.; Taulbee, T.D.

2000-01-01

Epidemiologic studies of workers at U.S. Department of Energy facilities are being conducted by the U.S. National Institute for Occupational Safety and Health to evaluate the health risk associated with exposure to sources of external and internal ionizing radiation. While exposure to external sources of radiation can be estimated from personal dosimeter data, reconstruction of exposure due to internally deposited radioactivity is more challenging because bioassay monitoring data is frequently less complete. Although comprehensive monitoring was provided for workers with the highest internal exposures, the majority of workers were monitored relatively infrequently. This monitoring was conducted to demonstrate compliance with regulations rather than to evaluate exposure for use in epidemiologic studies. Attributes of past internal monitoring programs that challenge accurate exposure assessment include: incomplete characterization of the workplace source term; a lack of timely measurements; insensitive and/or nonspecific bioassay measurements; and the presence of censored data. In spite of these limitations, many facilities have collected a large amount of worker and workplace monitoring information that can be used to evaluate internal exposure while minimizing worker misclassification. This paper describes a systematic approach for using the available worker and workplace monitoring data that can lead to either a qualitative or quantitative retrospective assessment of internal exposures. Various aspects of data analysis will be presented, including the evaluation of minimum detectable dose, the treatment of censored data, and the use of combinations of bioassay and workplace data to characterize exposures. Examples of these techniques applied to a cohort study involving chronic exposure scenarios to uranium are provided. A strategy for expressing exposure or dose in fundamental, unweighted units related to the quantity of radiation delivered to an organ will also

Human exposure assessment: Approaches for chemicals (REACH) and biocides (BPD)

NARCIS (Netherlands)

Hemmen, J.J. van; Gerritsen-Ebben, R.

2008-01-01

The approaches that are indicated in the various guidance documents for the assessment of human exposure for chemicals and biocides are summarised. This reflects the TNsG (Technical notes for Guidance) version 2: human exposure assessment for biocidal products (1) under the BPD (Biocidal Products

Assessment of occupational exposure to radiofrequency fields and radiation

International Nuclear Information System (INIS)

Cooper, T. G.; Allen, S. G.; Blackwell, R. P.; Litchfield, I.; Mann, S. M.; Pope, J. M.; Van Tongeren, M. J. A.

2004-01-01

The use of personal monitors for the assessment of exposure to radiofrequency fields and radiation in potential future epidemiological studies of occupationally exposed populations has been investigated. Data loggers have been developed for use with a commercially available personal monitor and these allowed personal exposure records consisting of time-tagged measurements of electric and magnetic field strength to be accrued over extended periods of the working day. The instrumentation was worn by workers carrying out tasks representative of some of their typical daily activities at a variety of radio sites. The results indicated significant differences in the exposures of workers in various RF environments. A number of measures of exposure have been examined with a view to assessing possible exposure metrics for epidemiological studies. There was generally a good correlation between a given measure of electric field strength and the same measure of magnetic field strength. (authors)

Categorization framework to aid exposure assessment of nanomaterials in consumer products

DEFF Research Database (Denmark)

Hansen, Steffen Foss; Michelson, Evan S.; Kamper, Anja

2008-01-01

Exposure assessment is crucial for risk assessment for nanomaterials. We propose a framework to aid exposure assessment in consumer products. We determined the location of the nanomaterials and the chemical identify of the 580 products listed in the inventory maintained by the Woodrow Wilson Inte...

Occupational exposure assessment: Practices in Malaysian nuclear agency

Energy Technology Data Exchange (ETDEWEB)

Sarowi, S. Muhd, E-mail: suzie@nuclearmalaysia.gov.my; Ramli, S. A.; Kontol, K. Mohamad [Radiation Safety & Health Division, Malaysian Nuclear Agency, 43000 Kajang, Selangor (Malaysia); Rahman, N. A. H. Abd. [Faculty of Science & Mathematics, Sultan Idris of Education Universit, 35900, Tanjong Malim, Perak Darul Ridzuan (Malaysia)

2016-01-22

Malaysian Nuclear Agency (Nuclear Malaysia) is the leading agency in introducing and promoting the application of nuclear science technology in Malaysia. The agency provides major nuclear facilities purposely for research and commercialisation such as reactor, irradiation plants and radioisotope production laboratory. When dealing with ionizing radiation, there is an obligatory requirement to monitor and assess the radiation exposure to the workers. The personal dose of radiation workers were monitored monthly by assessing their Thermoluminescence Dosimeter (TLD) dose reading. This paper will discuss the current practice in managing, assessing, record keeping and reporting of the occupational exposure in Nuclear Malaysia including the Health Physic Group roles and challenges. The statistics on occupational radiation exposure of monitored workers working in different fields in Nuclear Malaysia from 2011 - 2013 will also be presented. The results show that the null hypothesis (H{sub 0}) was accepted which the means of every populations are all equal or not differ significantly. This hypothesis states that the dose exposure received by the radiation workers in Nuclear Malaysia is similar and there were no significant changes from 2011 to 2013. The radiation monitoring programme correlate with the requirement of our national law, the Atomic Energy Licensing Act 1984 (Act 304)

Occupational exposure assessment: Practices in Malaysian nuclear agency

Science.gov (United States)

Sarowi, S. Muhd; Ramli, S. A.; Kontol, K. Mohamad; Rahman, N. A. H. Abd.

2016-01-01

Malaysian Nuclear Agency (Nuclear Malaysia) is the leading agency in introducing and promoting the application of nuclear science technology in Malaysia. The agency provides major nuclear facilities purposely for research and commercialisation such as reactor, irradiation plants and radioisotope production laboratory. When dealing with ionizing radiation, there is an obligatory requirement to monitor and assess the radiation exposure to the workers. The personal dose of radiation workers were monitored monthly by assessing their Thermoluminescence Dosimeter (TLD) dose reading. This paper will discuss the current practice in managing, assessing, record keeping and reporting of the occupational exposure in Nuclear Malaysia including the Health Physic Group roles and challenges. The statistics on occupational radiation exposure of monitored workers working in different fields in Nuclear Malaysia from 2011 - 2013 will also be presented. The results show that the null hypothesis (H₀) was accepted which the means of every populations are all equal or not differ significantly. This hypothesis states that the dose exposure received by the radiation workers in Nuclear Malaysia is similar and there were no significant changes from 2011 to 2013. The radiation monitoring programme correlate with the requirement of our national law, the Atomic Energy Licensing Act 1984 (Act 304).

Occupational exposure assessment: Practices in Malaysian nuclear agency

International Nuclear Information System (INIS)

Sarowi, S. Muhd; Ramli, S. A.; Kontol, K. Mohamad; Rahman, N. A. H. Abd.

2016-01-01

Malaysian Nuclear Agency (Nuclear Malaysia) is the leading agency in introducing and promoting the application of nuclear science technology in Malaysia. The agency provides major nuclear facilities purposely for research and commercialisation such as reactor, irradiation plants and radioisotope production laboratory. When dealing with ionizing radiation, there is an obligatory requirement to monitor and assess the radiation exposure to the workers. The personal dose of radiation workers were monitored monthly by assessing their Thermoluminescence Dosimeter (TLD) dose reading. This paper will discuss the current practice in managing, assessing, record keeping and reporting of the occupational exposure in Nuclear Malaysia including the Health Physic Group roles and challenges. The statistics on occupational radiation exposure of monitored workers working in different fields in Nuclear Malaysia from 2011 - 2013 will also be presented. The results show that the null hypothesis (H 0 ) was accepted which the means of every populations are all equal or not differ significantly. This hypothesis states that the dose exposure received by the radiation workers in Nuclear Malaysia is similar and there were no significant changes from 2011 to 2013. The radiation monitoring programme correlate with the requirement of our national law, the Atomic Energy Licensing Act 1984 (Act 304)

Exposure Monitoring and Risk Assessment of Biphenyl in the Workplace

OpenAIRE

Kim, Hyeon-Yeong; Shin, Sae-Mi; Ham, Miran; Lim, Cheol-Hong; Byeon, Sang-Hoon

2015-01-01

This study was performed to assess exposure to and the risk caused by biphenyl in the workplace. Biphenyl is widely used as a heat transfer medium and as an emulsifier and polish in industry. Vapor or high levels of dust inhalation and dermal exposure to biphenyl can cause eye inflammation, irritation of respiratory organs, and permanent lesions in the liver and nervous system. In this study, the workplace environment concentrations were assessed as central tendency exposure and reasonable ma...

INFLUENCE OF EXPOSURE ASSESSMENT METHOD IN AN EPIDEMIOLOGIC STUDY OF TRIHALOMETHANE EXPOSURE AND SPONTANEOUS ABORTION

Science.gov (United States)

Trihalomethanes are common contaminants of chlorinated drinking water. Studies of their health effects have been hampered by exposure misclassification, due in part to limitations inherent in using utility sampling records. We used two exposure assessment methods, one based on ut...

Assessment of personal exposures to optical radiation in large entertainment venues

International Nuclear Information System (INIS)

Bonner, R.; O'Hagan, J. B.; Khazova, M.

2012-01-01

Workplace exposure to optical radiation from artificial sources is regulated in Europe under the Artificial Optical Radiation Directive 2006/25/EC implemented in the UK as The Control of Artificial Optical Radiation at Work Regulations 2010. The entertainment environment often presents an extremely complex situation for the assessment of occupational exposures. Multiple illumination sources, continuously changing illumination conditions and people moving during performances add further complexity to the assessment. This document proposes a methodology for assessing the risks arising from exposure to optical radiation and presents detailed case studies of practical assessment for two large entertainment venues. (authors)

Incidence and Mortality of Breast Cancer and their Relationship to Development in Asia.

Science.gov (United States)

Ghoncheh, Mahshid; Mohammadian-Hafshejani, Abdollah; Salehiniya, Hamid

2015-01-01

This study aimed to investigate the incidence and mortality of breast cancer, and its relationship with human development index (HDI) and its components in Asia in 2012. This study was an ecologic study in Asia for assessment of the correlation between age-specific incidence rate (ASIR) and age-specific mortality rate (ASMR) with HDI and its details that include: life expectancy at birth, mean years of schooling and gross national income (GNI) per capita. Data about SIR and SMR for every Asian country for the year 2012 were obtained from the global cancer project. We used a bivariate method for assessment of the correlation between SIR and SMR and HDI and its individual components. Statistical significance was assumed if PASMR) was observed in Pakistan (25.2), Armenia (24.2), and Lebanon (24). There was a positive correlation between the ASIR of breast cancer and HDI (r = 0.556, p ASMR of breast cancer and HDI (r = -0.051). Breast cancer incidence in countries with higher development is greater, while mortality is greatest in countries with less development. There was a positive and significant relationship between the ASIR of breast cancer and HDI and its components. Also there was a negative but non significant relationship between the ASMR of breast cancer and HDI.

Quantifying human exposure to air pollution--moving from static monitoring to spatio-temporally resolved personal exposure assessment.

Science.gov (United States)

Steinle, Susanne; Reis, Stefan; Sabel, Clive Eric

2013-01-15

Quantifying human exposure to air pollutants is a challenging task. Ambient concentrations of air pollutants at potentially harmful levels are ubiquitous in urban areas and subject to high spatial and temporal variability. At the same time, every individual has unique activity-patterns. Exposure results from multifaceted relationships and interactions between environmental and human systems, adding complexity to the assessment process. Traditionally, approaches to quantify human exposure have relied on pollutant concentrations from fixed air quality network sites and static population distributions. New developments in sensor technology now enable us to monitor personal exposure to air pollutants directly while people are moving through their activity spaces and varying concentration fields. The literature review on which this paper is based on reflects recent developments in the assessment of human exposure to air pollution. This includes the discussion of methodologies and concepts, and the elaboration of approaches and study designs applied in the field. We identify shortcomings of current approaches and discuss future research needs. We close by proposing a novel conceptual model for the integrated assessment of human exposure to air pollutants taking into account latest technological capabilities and contextual information. Copyright © 2012 Elsevier B.V. All rights reserved.

In Vitro Exposure Systems and Dosimetry Assessment Tools ...

Science.gov (United States)

In 2009, the passing of The Family Smoking Prevention and Tobacco Control Act facilitated the establishment of the FDA Center for Tobacco Products (CTP) and gave it regulatory authority over the marketing, manufacture and distribution of tobacco products, including those termed “modified risk”. On 4-6 April 2016, the Institute for In Vitro Sciences, Inc. (IIVS) convened a workshop conference titled “In Vitro Exposure Systems and Dosimetry Assessment Tools for Inhaled Tobacco Products” to bring together stakeholders representing regulatory agencies, academia, and industry to address the research priorities articulated by the FDA CTP. Specific topics were covered to assess the status of current in vitro smoke and aerosol/vapor exposure systems, as well as the various approaches and challenges to quantifying the complex exposures, in in vitro pulmonary models developed for evaluating adverse pulmonary events resulting from tobacco product exposures. The four core topics covered were, 1) Tobacco Smoke And E-Cigarette Aerosols, 2) Air-Liquid Interface-In Vitro Exposure Systems, 3) Dosimetry Approaches For Particles And Vapors; In Vitro Dosimetry Determinations and 4) Exposure Microenvironment/Physiology Of Cells. The two and a half day workshop included presentations from 20 expert speakers, poster sessions, networking discussions, and breakout sessions which identified key findings and provided recommendations to advance these technologies. Here, we will re

Inequality in Human Development: An Empirical Assessment of 32 Countries

Science.gov (United States)

Grimm, Michael; Harttgen, Kenneth; Klasen, Stephan; Misselhorn, Mark; Munzi, Teresa; Smeeding, Timothy

2010-01-01

One of the most frequent critiques of the HDI is that is does not take into account inequality within countries in its three dimensions. In this paper, we apply a simply approach to compute the three components and the overall HDI for quintiles of the income distribution. This allows a comparison of the level in human development of the poor with…

Occupational Exposure Assessment of Nanomaterials using Control Banding Tools

DEFF Research Database (Denmark)

Liguori, Biase

, are relatively advanced, and they are good foundations for an advanced exposure assessment. Considering the tiered approach for workplace assessment proposed by the OECD, these two tools could be situated, between Tier 1 (Information gathering) and Tier 2 (Basic exposure assessment). Moreover, the thesis......Nanotechnology can be termed as the “new industrial revolution”. A broad range of potential benefits in various applications for the environment and everyday life of humans can be related to the use of nanotechnology. Nanomaterials are used in a large variety of products already in the market......, and because of their novel physical and chemical characteristics, the application of nanomaterials is projected to increase further. This will inevitably increase the production of nanomaterials with potential increase of exposure for the workers which are the first in line expected to become exposed...

Development of a spatial stochastic multimedia exposure model to assess population exposure at a regional scale

Energy Technology Data Exchange (ETDEWEB)

Caudeville, Julien, E-mail: Julien.CAUDEVILLE@ineris.fr [INERIS (French National Institute for Industrial Environment and Risks), Parc Technologique Alata, BP 2, 60550 Verneuil-en-Halatte (France); Joint research unit UMR 6599, Heudiasyc (Heuristic and Diagnoses of Complex Systems), University of Technology of Compiegne and CNRS, Rue du Dr Schweitzer, 60200 Compiegne (France); Bonnard, Roseline, E-mail: Roseline.BONNARD@ineris.fr [INERIS (French National Institute for Industrial Environment and Risks), Parc Technologique Alata, BP 2, 60550 Verneuil-en-Halatte (France); Boudet, Celine, E-mail: Celine.BOUDET@ineris.fr [INERIS (French National Institute for Industrial Environment and Risks), Parc Technologique Alata, BP 2, 60550 Verneuil-en-Halatte (France); Denys, Sebastien, E-mail: Sebastien.DENYS@ineris.fr [INERIS (French National Institute for Industrial Environment and Risks), Parc Technologique Alata, BP 2, 60550 Verneuil-en-Halatte (France); Govaert, Gerard, E-mail: gerard.govaert@utc.fr [Joint research unit UMR 6599, Heudiasyc (Heuristic and Diagnoses of Complex Systems), University of Technology of Compiegne and CNRS, Rue du Dr Schweitzer, 60200 Compiegne (France); Cicolella, Andre, E-mail: Andre.CICOLELLA@ineris.fr [INERIS (French National Institute for Industrial Environment and Risks), Parc Technologique Alata, BP 2, 60550 Verneuil-en-Halatte (France)

2012-08-15

Analyzing the relationship between the environment and health has become a major focus of public health efforts in France, as evidenced by the national action plans for health and the environment. These plans have identified the following two priorities: -identify and manage geographic areas where hotspot exposures are a potential risk to human health; and -reduce exposure inequalities. The aim of this study is to develop a spatial stochastic multimedia exposure model for detecting vulnerable populations and analyzing exposure determinants at a fine resolution and regional scale. A multimedia exposure model was developed by INERIS to assess the transfer of substances from the environment to humans through inhalation and ingestion pathways. The RESPIR project adds a spatial dimension by linking GIS (Geographic Information System) to the model. Tools are developed using modeling, spatial analysis and geostatistic methods to build and discretize interesting variables and indicators from different supports and resolutions on a 1-km{sup 2} regular grid. We applied this model to the risk assessment of exposure to metals (cadmium, lead and nickel) using data from a region in France (Nord-Pas-de-Calais). The considered exposure pathways include the atmospheric contaminant inhalation and ingestion of soil, vegetation, meat, egg, milk, fish and drinking water. Exposure scenarios are defined for different reference groups (age, dietary properties, and the fraction of food produced locally). The two largest risks correspond to an ancient industrial site (Metaleurop) and the Lille agglomeration. In these areas, cadmium, vegetation ingestion and soil contamination are the principal determinants of the computed risk. -- Highlights: Black-Right-Pointing-Pointer We present a multimedia exposure model for mapping environmental disparities. Black-Right-Pointing-Pointer We perform a risk assessment on a region of France at a fine scale for three metals. Black-Right-Pointing-Pointer We

Development of a spatial stochastic multimedia exposure model to assess population exposure at a regional scale

International Nuclear Information System (INIS)

Caudeville, Julien; Bonnard, Roseline; Boudet, Céline; Denys, Sébastien; Govaert, Gérard; Cicolella, André

2012-01-01

Analyzing the relationship between the environment and health has become a major focus of public health efforts in France, as evidenced by the national action plans for health and the environment. These plans have identified the following two priorities: -identify and manage geographic areas where hotspot exposures are a potential risk to human health; and -reduce exposure inequalities. The aim of this study is to develop a spatial stochastic multimedia exposure model for detecting vulnerable populations and analyzing exposure determinants at a fine resolution and regional scale. A multimedia exposure model was developed by INERIS to assess the transfer of substances from the environment to humans through inhalation and ingestion pathways. The RESPIR project adds a spatial dimension by linking GIS (Geographic Information System) to the model. Tools are developed using modeling, spatial analysis and geostatistic methods to build and discretize interesting variables and indicators from different supports and resolutions on a 1-km 2 regular grid. We applied this model to the risk assessment of exposure to metals (cadmium, lead and nickel) using data from a region in France (Nord-Pas-de-Calais). The considered exposure pathways include the atmospheric contaminant inhalation and ingestion of soil, vegetation, meat, egg, milk, fish and drinking water. Exposure scenarios are defined for different reference groups (age, dietary properties, and the fraction of food produced locally). The two largest risks correspond to an ancient industrial site (Metaleurop) and the Lille agglomeration. In these areas, cadmium, vegetation ingestion and soil contamination are the principal determinants of the computed risk. -- Highlights: ► We present a multimedia exposure model for mapping environmental disparities. ► We perform a risk assessment on a region of France at a fine scale for three metals. ► We examine exposure determinants and detect vulnerable population. ► The largest

Nano-metal oxides: Exposure and engineering control assessment.

Science.gov (United States)

Garcia, Alberto; Eastlake, Adrienne; Topmiller, Jennifer L; Sparks, Christopher; Martinez, Kenneth; Geraci, Charles L

2017-09-01

In January 2007, the National Institute for Occupational Safety and Health (NIOSH) conducted a field study to evaluate process specific emissions during the production of ENMs. This study was performed using the nanoparticle emission assessment technique (NEAT). During this study, it was determined that ENMs were released during production and cleaning of the process reactor. Airborne concentrations of silver, nickel, and iron were found both in the employee's personal breathing zone and area samples during reactor cleaning. At the completion of this initial survey, it was suggested that a flanged attachment be added to the local exhaust ventilation system.  NIOSH re-evaluated the facility in December 2011 to assess worker exposures following an increase in production rates. This study included a fully comprehensive emissions, exposure, and engineering control evaluation of the entire process. This study made use of the nanoparticle exposure assessment technique (NEAT 2.0). Data obtained from filter-based samples and direct reading instruments indicate that reactor cleanout increased the overall particle concentration in the immediate area. However, it does not appear that these concentrations affect areas outside of the production floor. As the distance between the reactor and the sample location increased, the observed particle number concentration decreased, creating a concentration gradient with respect to the reactor. The results of this study confirm that the flanged attachment on the local exhaust ventilation system served to decrease exposure potential.  Given the available toxicological data of the metals evaluated, caution is warranted. One should always keep in mind that occupational exposure levels were not developed specifically for nanoscale particles. With data suggesting that certain nanoparticles may be more toxic than the larger counterparts of the same material; employers should attempt to control emissions of these particles at the source

Health effects assessment of chemical exposures: ARIES methodology

Energy Technology Data Exchange (ETDEWEB)

Sierra, L; Montero, M.; Rabago, I.; Vidania, R.

1995-07-01

In this work, we present ARIES* update: a system designed in order to facilitate the human health effects assessment produced by accidental release of toxic chemicals. The first version of ARIES was developed in relation to 82/501/EEC Directive about mayor accidents in the chemical industry. So, the first aim was the support of the effects assessment derived for the chemicals included into this directive. From this establishment, it was considered acute exposures for high concentrations. In this report, we present the actual methodology for considering other type of exposures, such as environmental and occupational. Likewise other versions, the methodology comprises two approaches: quantitative and qualitative assessments. Quantitative assessment incorporates the mathematical algorithms useful to evaluate the effects produced by the most important routes of exposure: inhalation, ingestion, eye contact and skin absorption, in a short, medium and long term. It has been included models that realizes an accurate quantification of doses, effects,... and so on, such as simple approaches when the available information is not enough. Qualitative assessment, designed in order to complement or replace the previous one, is incorporated into an informatics system, developed in Clipper. It executes and displays outstanding and important toxicological information of about 100 chemicals. This information comes from ECDIN (Environmental Chemicals Data and Information Network) database through a collaboration with JRC-ISPRA working group. (Author) 24 refs.

Health effects assessment of chemical exposures: ARIES methodology

International Nuclear Information System (INIS)

Sierra, L; Montero, M.; Rabago, I.; Vidania, R.

1995-01-01

In this work, we present ARIES* update: a system designed in order to facilitate the human health effects assessment produced by accidental release of toxic chemicals. The first version of ARIES was developed in relation to 82/501/EEC Directive about mayor accidents in the chemical industry. So, the first aim was the support of the effects assessment derived for the chemicals included into this directive. From this establishment, it was considered acute exposures for high concentrations. In this report, we present the actual methodology for considering other type of exposures, such as environmental and occupational. Likewise other versions, the methodology comprises two approaches: quantitative and qualitative assessments. Quantitative assessment incorporates the mathematical algorithms useful to evaluate the effects produced by the most important routes of exposure: inhalation, ingestion, eye contact and skin absorption, in a short, medium and long term. It has been included models that realizes an accurate quantification of doses, effects,... and so on, such as simple approaches when the available information is not enough. Qualitative assessment, designed in order to complement or replace the previous one, is incorporated into an informatics system, developed in Clipper. It executes and displays outstanding and important toxicological information of about 100 chemicals. This information comes from ECDIN (Environmental Chemicals Data and Information Network) database through a collaboration with JRC-ISPRA working group. (Author) 24 refs

Population-Based Assessment of Exposure to Risk Behaviors in Motion Pictures.

Science.gov (United States)

Sargent, James D; Worth, Keilah A; Beach, Michael; Gerrard, Meg; Heatherton, Todd F

2008-01-01

The aim of most population-based studies of media is to relate a specific exposure to an outcome of interest. A research program has been developed that evaluates exposure to different components of movies in an attempt of assess the association of such exposure with the adoption of substance use during adolescence. To assess exposure to movie substance use, one must measure both viewing time and content. In developing the exposure measure, the study team was interested in circumventing a common problem in exposure measurement, where measures often conflate exposure to media with attention to media. Our aim in this paper is to present a validated measure of exposure to entertainment media, the Beach method, which combines recognition of a movie title with content analysis of the movie for substance use, to generate population based measures of exposure to substance use in this form of entertainment.

Assessment of exposure to shiftwork mechanisms in the general population: the development of a new job-exposure matrix.

Science.gov (United States)

Fernandez, Renae C; Peters, Susan; Carey, Renee N; Davies, Michael J; Fritschi, Lin

2014-10-01

To develop a job-exposure matrix (JEM) that estimates exposure to eight variables representing different aspects of shiftwork among female workers. Occupational history and shiftwork exposure data were obtained from a population-based breast cancer case-control study. Exposure to light at night, phase shift, sleep disturbances, poor diet, lack of physical activity, lack of vitamin D, and graveyard and early morning shifts, was calculated by occupational code. Three threshold values based on the frequency of exposure were considered (10%, 30% and 50%) for use as cut-offs in determining exposure for each occupational code. JEM-based exposure classification was compared with that from the OccIDEAS application (job-specific questionnaires and assessment by rules) by assessing the effect on the OR for phase shift and breast cancer. Using data from the Australian Workplace Exposure Study, the specificity and sensitivity of the threshold values were calculated for each exposure variable. 127 of 413 occupational codes involved exposure to one or more shiftwork variables. Occupations with the highest probability of exposure shiftwork included nurses and midwives. Using the 30% threshold, the OR for the association between phase shift exposure and breast cancer was decreased and no longer statistically significant (OR=1.14, 95% CI 0.92 to 1.42). The 30% cut-off point demonstrated best specificity and sensitivity, although results varied between exposure variables. This JEM provides a set of indicators reflecting biologically plausible mechanisms for the potential impact of shiftwork on health and may provide an alternative method of exposure assessment in the absence of detailed job history and exposure data. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Toxicity assessment of unintentional exposure to multiple chemicals

International Nuclear Information System (INIS)

Mumtaz, M.M.; Ruiz, P.; De Rosa, C.T.

2007-01-01

Typically exposure to environmental chemicals is unintentional, and often the exposure is to chemical mixtures, either simultaneously or sequentially. When exposure occurs, in public health practice, it is prudent to ascertain if thresholds for harmful health effects are exceeded, whether by individual chemicals or by chemicals in combination. Three alternative approaches are available for assessing the toxicity of chemical mixtures. Each approach, however, has shortcomings. As the procedures of each approach are described in this paper, at various steps research needs are identified. Recently, reliance has increased on computational toxicology methods for predicting toxicological effects when data are limited. Advances in molecular biology, identification of biomarkers, and availability of accurate and sensitive methods allow us to more precisely define the relationships between multiple chemical exposures and health effects, both qualitatively and quantitatively. Key research needs are best fulfilled through collaborative research. It is through such collaborations that resources are most effectively leveraged to further develop and apply toxicity assessment methods that advance public health practices in vulnerable communities

Stakeholder attitudes towards cumulative and aggregate exposure assessment of pesticides.

Science.gov (United States)

Verbeke, Wim; Van Loo, Ellen J; Vanhonacker, Filiep; Delcour, Ilse; Spanoghe, Pieter; van Klaveren, Jacob D

2015-05-01

This study evaluates the attitudes and perspectives of different stakeholder groups (agricultural producers, pesticide manufacturers, trading companies, retailers, regulators, food safety authorities, scientists and NGOs) towards the concepts of cumulative and aggregate exposure assessment of pesticides by means of qualitative in-depth interviews (n = 15) and a quantitative stakeholder survey (n = 65). The stakeholders involved generally agreed that the use of chemical pesticides is needed, primarily for meeting the need of feeding the growing world population, while clearly acknowledging the problematic nature of human exposure to pesticide residues. Current monitoring was generally perceived to be adequate, but the timeliness and consistency of monitoring practices across countries were questioned. The concept of cumulative exposure assessment was better understood by stakeholders than the concept of aggregate exposure assessment. Identified pitfalls were data availability, data limitations, sources and ways of dealing with uncertainties, as well as information and training needs. Regulators and food safety authorities were perceived as the stakeholder groups for whom cumulative and aggregate pesticide exposure assessment methods and tools would be most useful and acceptable. Insights obtained from this exploratory study have been integrated in the development of targeted and stakeholder-tailored dissemination and training programmes that were implemented within the EU-FP7 project ACROPOLIS. Copyright © 2014 Elsevier Ltd. All rights reserved.

Probabilistic assessment of exposure to hair cosmetic products by the French population.

Science.gov (United States)

Ficheux, A S; Bernard, A; Chevillotte, G; Dornic, N; Roudot, A C

2016-06-01

Cosmetic exposure data are limited in Europe and especially in France. The aim of this study was to assess the exposure to hair cosmetics using recent consumption data (percentage of users, frequency of use and amount per use) generated for the French population (Ficheux et al., 2015, 2016). Exposure was assessed using a probabilistic method for eleven hair products: liquid shampoo, dry shampoo, conditioner, hair mask, hair serum, hair oil, styling lacquer, styling gel, styling foam, styling wax and styling spray. Exposure was assessed by sex and by age classes in adults and children. Pregnant women were also studied. For liquid shampoo, conditioner and some styling products (gel, lacquer and foam), the levels of exposure were higher than the values currently used by the Scientific Committee on Consumer Safety (SCCS). Exposure values found for styling wax and styling spray were lower than SCCS values. Exposure was assessed for the first time for dry shampoo, hair mask, hair serum and hair oil products. These new French exposure values will be useful for safety assessors and for safety agencies in order to protect the general population and these at-risk populations. Copyright © 2016 Elsevier Ltd. All rights reserved.

Performance of GPS-devices for environmental exposure assessment.

Science.gov (United States)

Beekhuizen, Johan; Kromhout, Hans; Huss, Anke; Vermeulen, Roel

2013-01-01

Integration of individual time-location patterns with spatially resolved exposure maps enables a more accurate estimation of personal exposures to environmental pollutants than using estimates at fixed locations. Current global positioning system (GPS) devices can be used to track an individual's location. However, information on GPS-performance in environmental exposure assessment is largely missing. We therefore performed two studies. First, a commute-study, where the commute of 12 individuals was tracked twice, testing GPS-performance for five transport modes and two wearing modes. Second, an urban-tracking study, where one individual was tracked repeatedly through different areas, focused on the effect of building obstruction on GPS-performance. The median error from the true path for walking was 3.7 m, biking 2.9 m, train 4.8 m, bus 4.9 m, and car 3.3 m. Errors were larger in a high-rise commercial area (median error=7.1 m) compared with a low-rise residential area (median error=2.2 m). Thus, GPS-performance largely depends on the transport mode and urban built-up. Although ~85% of all errors were 50 m. Modern GPS-devices are useful tools for environmental exposure assessment, but large GPS-errors might affect estimates of exposures with high spatial variability.

Stoffenmanager exposure model: company-specific exposure assessments using a Bayesian methodology.

NARCIS (Netherlands)

Ven, P. van de; Fransman, W.; Schinkel, J.; Rubingh, C.; Warren, N.; Tielemans, E.

2010-01-01

The web-based tool "Stoffenmanager" was initially developed to assist small- and medium-sized enterprises in the Netherlands to make qualitative risk assessments and to provide advice on control at the workplace. The tool uses a mechanistic model to arrive at a "Stoffenmanager score" for exposure.

ASSESSMENT OF HUMAN EXPOSURE TO TOLUENE DIISOCYANATE

Directory of Open Access Journals (Sweden)

OLIVIA ANCA RUSU

2011-03-01

Full Text Available Assessment of human exposure to toluene diisocyanate. Toluene diisocyanate (TDI, an aromatic compound, may be dangerous for human health. Diisocyanates have wide industrial use in the fabrication of flexible and rigid foams, fibers, elastomers, and coatings such as paints and varnishes. Isocyanates are known skin and respiratory sensitizers, and proper engineering controls should be in place to prevent exposure to isocyanate liquid and vapor; exposure to TDI vapors is well documented to increase asthma risk. The study focused on the exposure of workers and nearby populations to toluene diisocyanate in a Polyurethane Foam Factory located in Baia Mare, Romania. Workplace air measurements were performed in different departments of the plant, after sampling either in fixed points or as personal monitoring. Sampling in four different locations of Baia Mare town was carried out, - during and after the foaming process. TDI sampling was performed on silica cartridge followed by GC-MS analysis. TDI concentration at workplace was lower than 0,035 mg/m³, which represents the permissible exposure limit, while in the city the TDI concentration had shown values below 0,20 μg/m³. Health assessment of a group of 49 workers was based on questionnaire interview, determination of TDI antibodies and lung function tests. Data collected until this stage do not show any negative effects of TDI on the employees health. Since this plant had only recently begun operating, continuous workplace and ambient air TDI monitoring, along with workers health surveillance, is deemed necessary.

Framework for Multi-Pathway Cumulative Exposure for Comparative Assessments

DEFF Research Database (Denmark)

McKone, Tom; Fantke, Peter

2016-01-01

in comparative risk assessment, life-cycle assessment (LCA), and chemical alternatives assessment (CAA), multimedia fate and exposure models synthesize information about partitioning, reaction, and intermedia-transport properties of chemicals in a representative (local to regional) or generic (continental...

Assessment of dermal exposure to chemicals

NARCIS (Netherlands)

Hemmen, J.J. van; Brouwer, D.H.

1995-01-01

The methods for the dermal exposure assessment vary in their complexity and are in some sense complementary to each other. The most easy-to-use methods involve a pseudo-skin-approach, such as gloves and removal by washing. In some cases generic modelling appears to be possible. The experimental

Human Development Index: A Non-Compensatory Assessment

Directory of Open Access Journals (Sweden)

Gutiérrez Ester

2009-10-01

Full Text Available El Índice de Desarrollo Humano es un indicador sintético basado en tres dimensiones esenciales: longevidad,
educación y nivel de vida. En este trabajo se adopta una perspectiva no-compensatoria que considera que la
privación de cualquiera de estas dimensiones básicas no puede ser suplida por los logros en otra. Según este
punto de vista, se propone utilizar el mínimo de los componentes, en lugar de la media aritmética. En el
documento se presentan los resultados de esta nueva evaluación para los últimos cinco años del índice HDI.
Este nuevo indicador (NCHDI, a pesar de estar correlacionado con el HDI, proporciona una ordenación
diferente de los países, nuevos conocimientos sobre los desequilibrios presentes en el HDI, y puede ser
utilizado a nivel nacional y local.

Incidence and mortality of kidney cancers, and human development index in Asia; a matter of concern.

Science.gov (United States)

Arabsalmani, Masoumeh; Mohammadian-Hafshejani, Abdollah; Ghoncheh, Mahshid; Hadadian, Fatemeh; Towhidi, Farhad; Vafaee, Kamran; Salehiniya, Hamid

2017-01-01

The incidence and mortality of kidney cancer have steadily increased by 2%- 3% per decade worldwide, and an increased risk of kidney cancer has been observed in many Asian countries. The information on the incidence and mortality of a disease and its distribution is essential for better planning for prevention and further studies. This study aimed to assess the incidence and mortality of kidney cancer and their correlation with the human development index (HDI) in Asia. This ecological study was based on GLOBOCAN data Asia for assessment the correlation between age-specific incidence rate (ASIR) and age-specific mortality rate (ASMR) with HDI and its details that include life expectancy at birth, mean years of schooling and gross national income (GNI) per capita. We use of correlation bivariate method for assessment the correlation between ASIR and ASMR with HDI and its components. A total of 121 099 kidney cancer cases were recorded in Asian countries in 2012.Overall, 80 080 cases (66.12%) were males. Sex ratio was 1.95. The three countries with the highest number of new patients were china (66 466 cases), Japan (16 830 cases), India(9658 cases), respectively. Positive correlation were seen between HDI and ASIR of kidney cancer 0.655 ( P = 0.001), and HDI and ASMR of kidney cancer 0.285 ( P = 0.055). A positive relationship between ASIR and the HDI was seen. The relationship is due to risk factors in countries with high development such as older age, smoking, hypertension, obesity, and diet. However, ASMR showed no significant relationship with HDI.

Harmonizing exposure metrics and methods for sustainability assessments of food contact materials

DEFF Research Database (Denmark)

Ernstoff, Alexi; Jolliet, Olivier; Niero, Monia

2016-01-01

) and Cradle to Cradle to support packaging design. Each assessment has distinct context and goals, but can help manage exposure to toxic chemicals and other environmental impacts. Metrics a nd methods to quantify and characterize exposure to potentially toxic chemicals specifically in food packaging are......, however, notably lacking from such assessments. Furthermore, previous case studies demonstrated that sustainable packaging design focuses, such as decreasing greenhouse gas emissions or resource consumption, can increase exposure to toxic chemicals through packaging. Thereby, developing harmonized methods...... for quantifying exposure to chemicals in food packaging is critical to ensure ‘sustainable packages’ do not increase exposure to toxic chemicals. Therefore we developed modelling methods suitable for first-tier risk screening and environmental assessments. The modelling framework was based on the new product...

Assessment of health impacts of radon exposures in Florida

International Nuclear Information System (INIS)

Vonstille, W.T.; Sacarello, H.L.A.

1990-01-01

This paper reports on residential radon levels, from a statewide Florida survey, that were used in an analysis of over 150,000 medically treated episodes of malignancies and other serious illnesses and conditions in whites, blacks and Hispanics from all counties in the state. No evidence of an increased percentage of cancer was found in any sex or ethnic group from the areas with the highest radon exposure levels. Age adjustment of data did not affect the results. The highest radon exposures were associated with some of the lowest cancer rates and contradict the risk assessment hypothesis based on extrapolation from exposures in mining. Points for DOE and EPA errors in risk assessment methods are reviewed; predictions from risk assessment should be empirically tested as in the case of any other scientific hypothesis before being used as a basis for public policy. Thus, the authors find that cancer risks of residential radon have been vastly overstated

A review of air exchange rate models for air pollution exposure assessments.

Science.gov (United States)

Breen, Michael S; Schultz, Bradley D; Sohn, Michael D; Long, Thomas; Langstaff, John; Williams, Ronald; Isaacs, Kristin; Meng, Qing Yu; Stallings, Casson; Smith, Luther

2014-11-01

A critical aspect of air pollution exposure assessments is estimation of the air exchange rate (AER) for various buildings where people spend their time. The AER, which is the rate of exchange of indoor air with outdoor air, is an important determinant for entry of outdoor air pollutants and for removal of indoor-emitted air pollutants. This paper presents an overview and critical analysis of the scientific literature on empirical and physically based AER models for residential and commercial buildings; the models highlighted here are feasible for exposure assessments as extensive inputs are not required. Models are included for the three types of airflows that can occur across building envelopes: leakage, natural ventilation, and mechanical ventilation. Guidance is provided to select the preferable AER model based on available data, desired temporal resolution, types of airflows, and types of buildings included in the exposure assessment. For exposure assessments with some limited building leakage or AER measurements, strategies are described to reduce AER model uncertainty. This review will facilitate the selection of AER models in support of air pollution exposure assessments.

Dermal exposure assessment to benzene and toluene using charcoal cloth pads

NARCIS (Netherlands)

Wendel de Joode, B. van; Tielemans, E.; Vermeulen, R.; Wegh, H.; Kromhout, H.

2005-01-01

Charcoal cloth pads have been used to assess volatile chemicals on the skin in a laboratory setting; however, they have not yet been applied to measure dermal exposure in occupational settings. This study aimed at evaluating whether charcoal pads can be used to assess dermal exposure to benzene and

Range-finding risk assessment of inhalation exposure to nanodiamonds in a laboratory environment.

Science.gov (United States)

Koivisto, Antti J; Palomäki, Jaana E; Viitanen, Anna-Kaisa; Siivola, Kirsi M; Koponen, Ismo K; Yu, Mingzhou; Kanerva, Tomi S; Norppa, Hannu; Alenius, Harri T; Hussein, Tareq; Savolainen, Kai M; Hämeri, Kaarle J

2014-05-16

This study considers fundamental methods in occupational risk assessment of exposure to airborne engineered nanomaterials. We discuss characterization of particle emissions, exposure assessment, hazard assessment with in vitro studies, and risk range characterization using calculated inhaled doses and dose-response translated to humans from in vitro studies. Here, the methods were utilized to assess workers' risk range of inhalation exposure to nanodiamonds (NDs) during handling and sieving of ND powder. NDs were agglomerated to over 500 nm particles, and mean exposure levels of different work tasks varied from 0.24 to 4.96 µg·m(-3) (0.08 to 0.74 cm(-3)). In vitro-experiments suggested that ND exposure may cause a risk for activation of inflammatory cascade. However, risk range characterization based on in vitro dose-response was not performed because accurate assessment of delivered (settled) dose on the cells was not possible. Comparison of ND exposure with common pollutants revealed that ND exposure was below 5 μg·m(-3), which is one of the proposed exposure limits for diesel particulate matter, and the workers' calculated dose of NDs during the measurement day was 74 ng which corresponded to 0.02% of the modeled daily (24 h) dose of submicrometer urban air particles.

Range-Finding Risk Assessment of Inhalation Exposure to Nanodiamonds in a Laboratory Environment

Directory of Open Access Journals (Sweden)

Antti J. Koivisto

2014-05-01

Full Text Available This study considers fundamental methods in occupational risk assessment of exposure to airborne engineered nanomaterials. We discuss characterization of particle emissions, exposure assessment, hazard assessment with in vitro studies, and risk range characterization using calculated inhaled doses and dose-response translated to humans from in vitro studies. Here, the methods were utilized to assess workers’ risk range of inhalation exposure to nanodiamonds (NDs during handling and sieving of ND powder. NDs were agglomerated to over 500 nm particles, and mean exposure levels of different work tasks varied from 0.24 to 4.96 µg·m−3 (0.08 to 0.74 cm−3. In vitro-experiments suggested that ND exposure may cause a risk for activation of inflammatory cascade. However, risk range characterization based on in vitro dose-response was not performed because accurate assessment of delivered (settled dose on the cells was not possible. Comparison of ND exposure with common pollutants revealed that ND exposure was below 5 μg·m−3, which is one of the proposed exposure limits for diesel particulate matter, and the workers’ calculated dose of NDs during the measurement day was 74 ng which corresponded to 0.02% of the modeled daily (24 h dose of submicrometer urban air particles.

Drone based measurement system for radiofrequency exposure assessment.

Science.gov (United States)

Joseph, Wout; Aerts, Sam; Vandenbossche, Matthias; Thielens, Arno; Martens, Luc

2016-03-10

For the first time, a method to assess radiofrequency (RF) electromagnetic field (EMF) exposure of the general public in real environments with a true free-space antenna system is presented. Using lightweight electronics and multiple antennas placed on a drone, it is possible to perform exposure measurements. This technique will enable researchers to measure three-dimensional RF-EMF exposure patterns accurately in the future and at locations currently difficult to access. A measurement procedure and appropriate measurement settings have been developed. As an application, outdoor measurements are performed as a function of height up to 60 m for Global System for Mobile Communications (GSM) 900 MHz base station exposure. Bioelectromagnetics. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Critical elements for human health risk assessment of less than lifetime exposures.

Science.gov (United States)

Geraets, Liesbeth; Nijkamp, Monique M; Ter Burg, Wouter

2016-11-01

Less than lifetime exposure has confronted risk assessors as to how to interpret the risks for human health in case a chronic health-based limit is exceeded. Intermittent, fluctuating and peak exposures do not match with the basis of the chronic limit values possibly leading to conservative outcomes. This paper presents guidance on how to deal with human risk assessment of less than lifetime exposure. Important steps to be considered are characterization of the human exposure situation, evaluation whether the human less than lifetime exposure scenario corresponds to a non-chronic internal exposure: toxicokinetic and toxicodynamic considerations, and, finally, re-evaluation of the risk assessment. Critical elements for these steps are the mode of action, Haber's rule, and toxicokinetics (ADME) amongst others. Previous work for the endpoints non-genotoxic carcinogenicity and developmental toxicity is included in the guidance. The guidance provides a way to consider the critical elements, without setting default factors to correct for the less than lifetime exposure in risk assessment. Copyright © 2016 Elsevier Inc. All rights reserved.

Release of nanomaterials from solid nanocomposites and consumer exposure assessment - a forward-looking review

DEFF Research Database (Denmark)

Mackevica, Aiga; Hansen, Steffen Foss

2016-01-01

of the studies report their findings in a format that can be used for exposure assessment under REACH, and most do not include characterization of the released particles. Although inhalation, dermal, and oral exposures can be derived using the guidelines on how to complete consumer exposure assessments under......The European chemical legislation requires manufacturers and importers of chemicals to do consumer exposure assessment when the chemical has certain hazards associated to it (e.g. explosive, carcinogenicity, and hazardous to the aquatic environment), but the question is how this obligation can...... be met in light of the scientific uncertainty and technical challenges related to exposure assessment of nanomaterials. In this paper, we investigate to what extent the information and data in the literature can be used to perform consumer exposure assessment according to the REACH requirements and we...

Exposure assessment in studies on health effects of traffic exhaust

Energy Technology Data Exchange (ETDEWEB)

Setaelae, S. [Association for the Pulmonary Disabled, Helsinki (Finland); Jaakkola, J.J.K. [Helsinki Univ. (Finland). Dept. of Public Health

1995-12-31

A main source of outdoor air pollution is road traffic, which produces a complex mixture of nitrogen oxides, carbon monoxide, volatile hydrocarbons, airborne particles and some other compounds. Traffic exhaust affects also the concentrations of ozone and other photo chemical oxidants. In earlier studies those components have had remarkable health effects. Several studies on occupational exposure to automobile exhaust have been published and several studies have been observed an association between both outdoor and indoor pollutant levels and health outcomes. However, there are only a few epidemiological studies in which traffic exhaust, a complex mixture, has been studied in its entirety. During recent years, interesting epidemiological studies of the health effects of this complex mixture have been published. Human exposure assessment for traffic exhaust can be categorized according to the environment of exposure (indoors, outdoors, in-traffic) or to the method of exposure assessment (direct or indirect methods). In this presentation the methods are further categorized into (1) traffic activity, (2) air concentration measurements, and (3) dispersion models, in order to better understand the advantages and disadvantages of different approaches. The objective of this presentation is to make a critical review of exposure assessments in the epidemiological studies on health effects of traffic exhaust. (author)

Exposure assessment in studies on health effects of traffic exhaust

Energy Technology Data Exchange (ETDEWEB)

Setaelae, S [Association for the Pulmonary Disabled, Helsinki (Finland); Jaakkola, J J.K. [Helsinki Univ. (Finland). Dept. of Public Health

1996-12-31

A main source of outdoor air pollution is road traffic, which produces a complex mixture of nitrogen oxides, carbon monoxide, volatile hydrocarbons, airborne particles and some other compounds. Traffic exhaust affects also the concentrations of ozone and other photo chemical oxidants. In earlier studies those components have had remarkable health effects. Several studies on occupational exposure to automobile exhaust have been published and several studies have been observed an association between both outdoor and indoor pollutant levels and health outcomes. However, there are only a few epidemiological studies in which traffic exhaust, a complex mixture, has been studied in its entirety. During recent years, interesting epidemiological studies of the health effects of this complex mixture have been published. Human exposure assessment for traffic exhaust can be categorized according to the environment of exposure (indoors, outdoors, in-traffic) or to the method of exposure assessment (direct or indirect methods). In this presentation the methods are further categorized into (1) traffic activity, (2) air concentration measurements, and (3) dispersion models, in order to better understand the advantages and disadvantages of different approaches. The objective of this presentation is to make a critical review of exposure assessments in the epidemiological studies on health effects of traffic exhaust. (author)

Long-term dietary exposure to lead in young European children: Comparing a pan-European approach with a national exposure assessment

DEFF Research Database (Denmark)

Boon, P.E.; Te Biesebeek, J.D.; van Klaveren, J.D.

2012-01-01

Long-term dietary exposures to lead in young children were calculated by combining food consumption data of 11 European countries categorised using harmonised broad food categories with occurrence data on lead from different Member States (pan-European approach). The results of the assessment...... in children living in the Netherlands were compared with a long-term lead intake assessment in the same group using Dutch lead concentration data and linking the consumption and concentration data at the highest possible level of detail. Exposures obtained with the pan-European approach were higher than...... the national exposure calculations. For both assessments cereals contributed most to the exposure. The lower dietary exposure in the national study was due to the use of lower lead concentrations and a more optimal linkage of food consumption and concentration data. When a pan-European approach, using...

Distinguishing nanomaterial particles from background airborne particulate matter for quantitative exposure assessment

Science.gov (United States)

Ono-Ogasawara, Mariko; Serita, Fumio; Takaya, Mitsutoshi

2009-10-01

As the production of engineered nanomaterials quantitatively expands, the chance that workers involved in the manufacturing process will be exposed to nanoparticles also increases. A risk management system is needed for workplaces in the nanomaterial industry based on the precautionary principle. One of the problems in the risk management system is difficulty of exposure assessment. In this article, examples of exposure assessment in nanomaterial industries are reviewed with a focus on distinguishing engineered nanomaterial particles from background nanoparticles in workplace atmosphere. An approach by JNIOSH (Japan National Institute of Occupational Safety and Health) to quantitatively measure exposure to carbonaceous nanomaterials is also introduced. In addition to real-time measurements and qualitative analysis by electron microscopy, quantitative chemical analysis is necessary for quantitatively assessing exposure to nanomaterials. Chemical analysis is suitable for quantitative exposure measurement especially at facilities with high levels of background NPs.

Harmonisation of food categorisation systems for dietary exposure assessments among European children

DEFF Research Database (Denmark)

De Neve, Melissa; Sioen, Isabelle; Boon, Polly

2010-01-01

Within the European project called EXPOCHI (Individual Food Consumption Data and Exposure Assessment Studies for Children), 14 different European individual food consumption databases of children were used to conduct harmonised dietary exposure assessments for lead, chromium, selenium and food...... colours. For this, two food categorisation systems were developed to classify the food consumption data in such a way that these could be linked to occurrence data of the considered compounds. One system served for the exposure calculations of lead, chromium and selenium. The second system was developed...... for the exposure assessment of food colours. The food categories defined for the lead, chromium and selenium exposure calculations were used as a basis for the food colour categorisation, with adaptations to optimise the linkage with the food colour occurrence data. With this work, an initial impetus was given...

Risk assessment for heart disease and workplace ETS exposure among nonsmokers.

OpenAIRE

Steenland, K

1999-01-01

In 1994 the U.S. Occupational Health and Safety Administration (OSHA) published a study of risk assessment for heart disease and lung cancer resulting from workplace exposure to environmental tobacco smoke (ETS) among nonsmokers. This assessment is currently being revised. The present article considers different possible approaches to a risk assessment for heart disease among nonsmokers resulting from workplace ETS exposure, reviews the approach taken by OSHA in 1994, and suggests some modifi...

Improving the relevance and efficiency of human exposure assessments within the process of regulatory risk assessment.

Science.gov (United States)

Money, Chris

2018-01-24

The process for undertaking exposure assessments varies dependent on its purpose. But for exposure assessments to be relevant and accurate, they are reliant on access to reliable information on key exposure determinants. Acquiring such information is seldom straightforward and can take significant time and resources. This articles examines how the application of tiered and targeted approaches to information acquisition, within the context of European human health risk assessments, can not only lead to improvements in the efficiency and effectiveness of the process but also in the confidence of stakeholders in its outputs. The article explores how the benefits might be further improved through the coordination of such activities, as well as those areas that represent barriers to wider international harmonisation.

Primary blast survival and injury risk assessment for repeated blast exposures.

Science.gov (United States)

Panzer, Matthew B; Bass, Cameron R Dale; Rafaels, Karin A; Shridharani, Jay; Capehart, Bruce P

2012-02-01

The widespread use of explosives by modern insurgents and terrorists has increased the potential frequency of blast exposure in soldiers and civilians. This growing threat highlights the importance of understanding and evaluating blast injury risk and the increase of injury risk from exposure to repeated blast effects. Data from more than 3,250 large animal experiments were collected from studies focusing on the effects of blast exposure. The current study uses 2,349 experiments from the data collection for analysis of the primary blast injury and survival risk for both long- and short-duration blasts, including the effects from repeated exposures. A piecewise linear logistic regression was performed on the data to develop survival and injury risk assessment curves. New injury risk assessment curves uniting long- and short-duration blasts were developed for incident and reflected pressure measures and were used to evaluate the risk of injury based on blast over pressure, positive-phase duration, and the number of repeated exposures. The risk assessments were derived for three levels of injury severity: nonauditory, pulmonary, and fatality. The analysis showed a marked initial decrease in injury tolerance with each subsequent blast exposure. This effect decreases with increasing number of blast exposures. The new injury risk functions showed good agreement with the existing experimental data and provided a simplified model for primary blast injury risk. This model can be used to predict blast injury or fatality risk for single exposure and repeated exposure cases and has application in modern combat scenarios or in setting occupational health limits. .Copyright © 2012 by Lippincott Williams & Wilkins

Children's exposure assessment of radiofrequency fields: Comparison between spot and personal measurements.

Science.gov (United States)

Gallastegi, Mara; Huss, Anke; Santa-Marina, Loreto; Aurrekoetxea, Juan J; Guxens, Mònica; Birks, Laura Ellen; Ibarluzea, Jesús; Guerra, David; Röösli, Martin; Jiménez-Zabala, Ana

2018-05-24

Radiofrequency (RF) fields are widely used and, while it is still unknown whether children are more vulnerable to this type of exposure, it is essential to explore their level of exposure in order to conduct adequate epidemiological studies. Personal measurements provide individualized information, but they are costly in terms of time and resources, especially in large epidemiological studies. Other approaches, such as estimation of time-weighted averages (TWAs) based on spot measurements could simplify the work. The aims of this study were to assess RF exposure in the Spanish INMA birth cohort by spot measurements and by personal measurements in the settings where children tend to spend most of their time, i.e., homes, schools and parks; to identify the settings and sources that contribute most to that exposure; and to explore if exposure assessment based on spot measurements is a valid proxy for personal exposure. When children were 8 years old, spot measurements were conducted in the principal settings of 104 participants: homes (104), schools and their playgrounds (26) and parks (79). At the same time, personal measurements were taken for a subsample of 50 children during 3 days. Exposure assessment based on personal and on spot measurements were compared both in terms of mean exposures and in exposure-dependent categories by means of Bland-Altman plots, Cohen's kappa and McNemar test. Median exposure levels ranged from 29.73 (in children's bedrooms) to 200.10 μW/m 2 (in school playgrounds) for spot measurements and were higher outdoors than indoors. Median personal exposure was 52.13 μW/m 2 and median levels of assessments based on spot measurements ranged from 25.46 to 123.21 μW/m 2 . Based on spot measurements, the sources that contributed most to the exposure were FM radio, mobile phone downlink and Digital Video Broadcasting-Terrestrial, while indoor and personal sources contributed very little (altogether spot measurements, with the latter

Aggregate Exposure and Cumulative Risk Assessment--Integrating Occupational and Non-occupational Risk Factors.

Science.gov (United States)

Lentz, T J; Dotson, G S; Williams, P R D; Maier, A; Gadagbui, B; Pandalai, S P; Lamba, A; Hearl, F; Mumtaz, M

2015-01-01

Occupational exposure limits have traditionally focused on preventing morbidity and mortality arising from inhalation exposures to individual chemical stressors in the workplace. While central to occupational risk assessment, occupational exposure limits have limited application as a refined disease prevention tool because they do not account for all of the complexities of the work and non-occupational environments and are based on varying health endpoints. To be of greater utility, occupational exposure limits and other risk management tools could integrate broader consideration of risks from multiple exposure pathways and routes (aggregate risk) as well as the combined risk from exposure to both chemical and non-chemical stressors, within and beyond the workplace, including the possibility that such exposures may cause interactions or modify the toxic effects observed (cumulative risk). Although still at a rudimentary stage in many cases, a variety of methods and tools have been developed or are being used in allied risk assessment fields to incorporate such considerations in the risk assessment process. These approaches, which are collectively referred to as cumulative risk assessment, have potential to be adapted or modified for occupational scenarios and provide a tangible path forward for occupational risk assessment. Accounting for complex exposures in the workplace and the broader risks faced by the individual also requires a more complete consideration of the composite effects of occupational and non-occupational risk factors to fully assess and manage worker health problems. Barriers to integrating these different factors remain, but new and ongoing community-based and worker health-related initiatives may provide mechanisms for identifying and integrating risk from aggregate exposures and cumulative risks from all relevant sources, be they occupational or non-occupational.

Chemical Exposure Assessment Program at Los Alamos National Laboratory: A risk based approach

International Nuclear Information System (INIS)

Stephenson, D.J.

1996-01-01

The University of California Contract And DOE Order 5480.10 require that Los Alamos National Laboratory (LANL) perform health hazard assessments/inventories of all employee workplaces. In response to this LANL has developed the Chemical Exposure Assessment Program. This program provides a systematic risk-based approach to anticipation, recognition, evaluation and control of chemical workplace exposures. Program implementation focuses resources on exposures with the highest risks for causing adverse health effects. Implementation guidance includes procedures for basic characterization, qualitative risk assessment, quantitative validation, and recommendations and reevaluation. Each component of the program is described. It is shown how a systematic method of assessment improves documentation, retrieval, and use of generated exposure information

Global Prostate Cancer Incidence and Mortality Rates According to the Human Development Index.

Science.gov (United States)

Khazaei, Salman; Rezaeian, Shahab; Ayubi, Erfan; Gholamaliee, Behzad; Pishkuhi, Mahin Ahmadi; Khazaei, Somayeh; Mansori, Kamyar; Nematollahi, Shahrzad; Sani, Mohadeseh; Hanis, Shiva Mansouri

2016-01-01

Prostate cancer (PC) is one of the leading causes of death, especially in developed countries. The human development index (HDI) and its dimensions seem correlated with incidence and mortality rates of PC. This study aimed to assess the association of the specific components of HDI (life expectancy at birth, education, gross national income per 1000 capita, health, and living standards) with burden indicators of PC worldwide. Information of the incidence and mortality rates of PC was obtained from the GLOBOCAN cancer project in year 2012 and data about the HDI 2013 were obtained from the World Bank database. The correlation between incidence, mortality rates, and the HDI parameters were assessed using STATA software. A significant inequality of PC incidence rates was observed according to concentration indexes=0.25 with 95% CI (0.22, 0.34) and a negative mortality concentration index of -0.04 with 95% CI (-0.09, 0.01) was observed. A positive significant correlation was detected between the incidence rates of PC and the HDI and its dimensions including life expectancy at birth, education, income, urbanization level and obesity. However, there was a negative significant correlation between the standardized mortality rates and the life expectancy, income and HDI.

Assessment of genetic risk for human exposure to radiation

International Nuclear Information System (INIS)

Sevcenko, V.A.; Rubanovic, A.V.

2002-01-01

Full text: The methodology of assessing the genetic risk of radiation exposure is based on the concept of 'hitting the target' in development of which N.V. Timofeeff-Ressovsky has played and important role. To predict genetic risk posed by irradiation, the U N Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) has worked out direct and indirect methods of assessment, extrapolation, integral and palpitation criteria of risk analysis that together permit calculating the risk from human exposure on the basis of data obtained for mice. Based on the reports of UNSCEAR for the period from 1958 to 2001 the paper presents a retrospective analysis of the use of direct methods and the doubling dose method for quantitative determination of the genetic risk of human exposure expressed as different hereditary diseases. As early as 1962 UNSCEAR estimated the doubling dose (a dose causing as many mutations as those occurring spontaneously during one generation) at 1 Gy for cases of exposure to ionizing radiations with low LET at a low dose rate and this value was confirmed in the next UNSCEAR reports up to now. For cases of acute irradiation the doubling dose was estimated at 0,3-0,4 Gy for the period under review. The paper considers the evolution of the concepts of human natural hereditary variability which is a basis for assessing the risk of exposure by the doubling dose method. The level of human natural genetic variability per 1 000 000 newborns is estimated at 738 000 hereditary diseases including mendelian, chromosomal and multifactorial ones. The greatest difficulties in assessing the doubling dose value were found to occur in the case of multifactorial diseases the pheno typical expression of which depends on mutational events in polygenic systems and on numerous environmental factors. The introduction in calculations of the potential recoverability correction factor (RPCF) made it possible to assess the genetic risk taking into account this class of

An introduction to the indirect exposure assessment approach: modeling human exposure using microenvironmental measurements and the recent National Human Activity Pattern Survey.

Science.gov (United States)

Klepeis, N E

1999-01-01

Indirect exposure approaches offer a feasible and accurate method for estimating population exposures to indoor pollutants, including environmental tobacco smoke (ETS). In an effort to make the indirect exposure assessment approach more accessible to people in the health and risk assessment fields, this paper provides examples using real data from (italic>a(/italic>) a week-long personal carbon monoxide monitoring survey conducted by the author; and (italic>b(/italic>) the 1992 to 1994 National Human Activity Pattern Survey (NHAPS) for the United States. The indirect approach uses measurements of exposures in specific microenvironments (e.g., homes, bars, offices), validated microenvironmental models (based on the mass balance equation), and human activity pattern data obtained from questionnaires to predict frequency distributions of exposure for entire populations. This approach requires fewer resources than the direct approach to exposure assessment, for which the distribution of monitors to a representative sample of a given population is necessary. In the indirect exposure assessment approach, average microenvironmental concentrations are multiplied by the total time spent in each microenvironment to give total integrated exposure. By assuming that the concentrations encountered in each of 10 location categories are the same for different members of the U.S. population (i.e., the NHAPS respondents), the hypothetical contribution that ETS makes to the average 24-hr respirable suspended particle exposure for Americans working their main job is calculated in this paper to be 18 microg/m3. This article is an illustrative review and does not contain an actual exposure assessment or model validation. Images Figure 3 Figure 4 PMID:10350522

Environmental exposure assessment framework for nanoparticles in solid waste

Science.gov (United States)

Boldrin, Alessio; Hansen, Steffen Foss; Baun, Anders; Hartmann, Nanna Isabella Bloch; Astrup, Thomas Fruergaard

2014-06-01

Information related to the potential environmental exposure of engineered nanomaterials (ENMs) in the solid waste management phase is extremely scarce. In this paper, we define nanowaste as separately collected or collectable waste materials which are or contain ENMs, and we present a five-step framework for the systematic assessment of ENM exposure during nanowaste management. The framework includes deriving EOL nanoproducts and evaluating the physicochemical properties of the nanostructure, matrix properties and nanowaste treatment processes as well as transformation processes and environment releases, eventually leading to a final assessment of potential ENM exposure. The proposed framework was applied to three selected nanoproducts: nanosilver polyester textile, nanoTiO2 sunscreen lotion and carbon nanotube tennis racquets. We found that the potential global environmental exposure of ENMs associated with these three products was an estimated 0.5-143 Mg/year, which can also be characterised qualitatively as medium, medium, low, respectively. Specific challenges remain and should be subject to further research: (1) analytical techniques for the characterisation of nanowaste and its transformation during waste treatment processes, (2) mechanisms for the release of ENMs, (3) the quantification of nanowaste amounts at the regional scale, (4) a definition of acceptable limit values for exposure to ENMs from nanowaste and (5) the reporting of nanowaste generation data.

Development of a method for personal, spatiotemporal exposure assessment.

Science.gov (United States)

Adams, Colby; Riggs, Philip; Volckens, John

2009-07-01

This work describes the development and evaluation of a high resolution, space and time-referenced sampling method for personal exposure assessment to airborne particulate matter (PM). This method integrates continuous measures of personal PM levels with the corresponding location-activity (i.e. work/school, home, transit) of the subject. Monitoring equipment include a small, portable global positioning system (GPS) receiver, a miniature aerosol nephelometer, and an ambient temperature monitor to estimate the location, time, and magnitude of personal exposure to particulate matter air pollution. Precision and accuracy of each component, as well as the integrated method performance were tested in a combination of laboratory and field tests. Spatial data was apportioned into pre-determined location-activity categories (i.e. work/school, home, transit) with a simple, temporospatially-based algorithm. The apportioning algorithm was extremely effective with an overall accuracy of 99.6%. This method allows examination of an individual's estimated exposure through space and time, which may provide new insights into exposure-activity relationships not possible with traditional exposure assessment techniques (i.e., time-integrated, filter-based measurements). Furthermore, the method is applicable to any contaminant or stressor that can be measured on an individual with a direct-reading sensor.

Task-based dermal exposure models for regulatory risk assessment.

Science.gov (United States)

Warren, Nicholas D; Marquart, Hans; Christopher, Yvette; Laitinen, Juha; VAN Hemmen, Joop J

2006-07-01

The regulatory risk assessment of chemicals requires the estimation of occupational dermal exposure. Until recently, the models used were either based on limited data or were specific to a particular class of chemical or application. The EU project RISKOFDERM has gathered a considerable number of new measurements of dermal exposure together with detailed contextual information. This article describes the development of a set of generic task-based models capable of predicting potential dermal exposure to both solids and liquids in a wide range of situations. To facilitate modelling of the wide variety of dermal exposure situations six separate models were made for groupings of exposure scenarios called Dermal Exposure Operation units (DEO units). These task-based groupings cluster exposure scenarios with regard to the expected routes of dermal exposure and the expected influence of exposure determinants. Within these groupings linear mixed effect models were used to estimate the influence of various exposure determinants and to estimate components of variance. The models predict median potential dermal exposure rates for the hands and the rest of the body from the values of relevant exposure determinants. These rates are expressed as mg or microl product per minute. Using these median potential dermal exposure rates and an accompanying geometric standard deviation allows a range of exposure percentiles to be calculated.

Optimizing cost-efficiency in mean exposure assessment--cost functions reconsidered.

Science.gov (United States)

Mathiassen, Svend Erik; Bolin, Kristian

2011-05-21

Reliable exposure data is a vital concern in medical epidemiology and intervention studies. The present study addresses the needs of the medical researcher to spend monetary resources devoted to exposure assessment with an optimal cost-efficiency, i.e. obtain the best possible statistical performance at a specified budget. A few previous studies have suggested mathematical optimization procedures based on very simple cost models; this study extends the methodology to cover even non-linear cost scenarios. Statistical performance, i.e. efficiency, was assessed in terms of the precision of an exposure mean value, as determined in a hierarchical, nested measurement model with three stages. Total costs were assessed using a corresponding three-stage cost model, allowing costs at each stage to vary non-linearly with the number of measurements according to a power function. Using these models, procedures for identifying the optimally cost-efficient allocation of measurements under a constrained budget were developed, and applied on 225 scenarios combining different sizes of unit costs, cost function exponents, and exposure variance components. Explicit mathematical rules for identifying optimal allocation could be developed when cost functions were linear, while non-linear cost functions implied that parts of or the entire optimization procedure had to be carried out using numerical methods.For many of the 225 scenarios, the optimal strategy consisted in measuring on only one occasion from each of as many subjects as allowed by the budget. Significant deviations from this principle occurred if costs for recruiting subjects were large compared to costs for setting up measurement occasions, and, at the same time, the between-subjects to within-subject variance ratio was small. In these cases, non-linearities had a profound influence on the optimal allocation and on the eventual size of the exposure data set. The analysis procedures developed in the present study can be used

Risk assessment of fluoride exposure in drinking water of Tunisia.

Science.gov (United States)

Guissouma, Wiem; Hakami, Othman; Al-Rajab, Abdul Jabbar; Tarhouni, Jamila

2017-06-01

The presence of fluoride in drinking water is known to reduce dental cavities among consumers, but an excessive intake of this anion might leads to dental and skeletal fluorosis. This study reports a complete survey of the fluoridated tap water taken from 100 water consumption points in Tunisia. The fluoride concentrations in tap water were between 0 and 2.4 mg L -1 . Risk assessment of Fluoride exposure was assessed depending on the age of consumers using a four-step method: hazard identification, toxicity reference values selection (TRVs), daily exposure assessment, and risk characterization. Our findings suggest that approximately 75% of the Tunisian population is at risk for dental decay, 25% have a potential dental fluorosis risk, and 20% might have a skeletal fluorosis risk according to the limits of fluoride in drinking water recommended by WHO. More investigations are recommended to assess the exposure risk of fluoride in other sources of drinking water such as bottled water. Copyright © 2017 Elsevier Ltd. All rights reserved.

Elaboration of a concept for the cumulative environmental exposure assessment of biocides

Energy Technology Data Exchange (ETDEWEB)

Gross, Rita; Bunke, Dirk; Moch, Katja [Oeko-Institut e.V. - Institut fuer Angewandte Oekologie e.V., Freiburg im Breisgau (Germany); Gartiser, Stefan [Hydrotox GmbH, Freiburg im Breisgau (Germany)

2011-12-15

Article 10(1) of the EU Biocidal Products Directive 98/8/EC (BPD) requires that for the inclusion of an active substance in Annex I, Annex IA or IB, cumulation effects from the use of biocidal products containing the same active substance shall be taken into account, where relevant. The study proves the feasibility of a technical realisation of Article 10(1) of the BPD and elaborates a first concept for the cumulative environmental exposure assessment of biocides. Existing requirements concerning cumulative assessments in other regulatory frameworks have been evaluated and their applicability for biocides has been examined. Technical terms and definitions used in this context were documented with the aim to harmonise terminology with other frameworks and to set up a precise definition within the BPD. Furthermore, application conditions of biocidal products have been analysed to find out for which cumulative exposure assessments may be relevant. Different parameters were identified which might serve as indicators for the relevance of cumulative exposure assessments. These indicators were then integrated in a flow chart by means of which the relevance of cumulative exposure assessments can be checked. Finally, proposals for the technical performance of cumulative exposure assessments within the Review Programme have been elaborated with the aim to bring the results of the project into the upcoming development and harmonization processes on EU level. (orig.)

A Chemical Activity Approach to Exposure and Risk Assessment of Chemicals

DEFF Research Database (Denmark)

Gobas, Frank A. P. C.; Mayer, Philipp; Parkerton, Thomas F.

2018-01-01

activity approach, its strengths and limitations, and provides examples of how this concept may be applied to the management of single chemicals and chemical mixtures. The examples demonstrate that the chemical activity approach provides a useful framework for 1) compiling and evaluating exposure......To support the goals articulated in the vision for exposure and risk assessment in the twenty-first century, we highlight the application of a thermodynamic chemical activity approach for the exposure and risk assessment of chemicals in the environment. The present article describes the chemical...... assessment. The article further illustrates that the chemical activity approach can support an adaptive management strategy for environmental stewardship of chemicals where “safe” chemical activities are established based on toxicological studies and presented as guidelines for environmental quality...

Using ecosystem modelling techniques in exposure assessments of radionuclides - an overview

International Nuclear Information System (INIS)

Kumblad, L.

2005-01-01

The risk to humans from potential releases from nuclear facilities is evaluated in safety assessments. Essential components of these assessments are exposure models, which estimate the transport of radionuclides in the environment, the uptake in biota, and transfer to humans. Recently, there has been a growing concern for radiological protection of the whole environment, not only humans, and a first attempt has been to employ model approaches based on stylized environments and transfer functions to biota based exclusively on bioconcentration factors (BCF). They are generally of a non-mechanistic nature and involve no knowledge of the actual processes involved, which is a severe limitation when assessing real ecosystems. in this paper, the possibility of using an ecological modelling approach as a complement or an alternative to the use of BCF-based models is discussed. The paper gives an overview of ecological and ecosystem modelling and examples of studies where ecosystem models have been used in association to ecological risk assessment studies for other pollutants than radionuclides. It also discusses the potential to use this technique in exposure assessments of radionuclides with a few examples from the safety assessment work performed by the Swedish nuclear fuel and waste management company (SKB). Finally there is a comparison of the characteristics of ecosystem models and traditionally exposure models for radionuclides used to estimate the radionuclide exposure of biota. The evaluation of ecosystem models already applied in safety assessments has shown that the ecosystem approach is possible to use to assess exposure to biota, and that it can handle many of the modelling problems identified related to BCF-models. The findings in this paper suggest that both national and international assessment frameworks for protection of the environment from ionising radiation would benefit from striving to adopt methodologies based on ecologically sound principles and

Exposure Assessment of Diesel Bus Emissions

Directory of Open Access Journals (Sweden)

Werner Hofmann

2006-12-01

Full Text Available The goal of this study was to measure ultrafine particle concentrations with diameters less than 1 μm emitted by diesel buses and to assess resulting human exposure levels. The study was conducted at the Woolloongabba Busway station in Brisbane, Australia in the winter months of 2002 during which temperature inversions frequently occurred. Most buses that utilize the station are fuelled by diesel, the exhaust of which contains a significant quantity of particle matter. Passengers waiting at the station are exposed to these particles emitted from the buses. During the course of this study, passenger census was conducted, based on video surveillance, yielding person-by-person waiting time data. Furthermore, a bus census revealed accurate information about the total number of diesel versus Compressed Natural Gas (CNG powered buses. Background (outside of the bus station and platform measurements of ultrafine particulate number size distributions were made to determine ambient aerosol concentrations. Particle number exposure concentration ranges from 10 and 40 to 60% of bus related exhaust fumes. This changes dramatically when considering the particle mass exposure concentration, where most passengers are exposed to about 50 to 80% of exhaust fumes. The obtained data can be very significant for comparison with similar work of this type because it is shown in previous studies that exhaust emissions causes cancer in laboratory animals. It was assumed that significant differences between platform and background distributions were due to bus emissions which, combined with passenger waiting times, yielded an estimate of passenger exposure to ultrafine particles from diesel buses. From an exposure point of view, the Busway station analyzed resembles a street canyon. Although the detected exhaust particle concentration at the outbound platform is found to be in the picogram range, exposure increases with the time passengers spend on the platform

Assessing asbestos exposure potential in nonindustrial settings.

Science.gov (United States)

Chang, S N; White, L E; Scott, W D

1987-01-01

The presence of asbestos containing materials (ACM) in office and commercial buildings is a significant environmental problem. Asbestosis, mesothelioma and lung cancer have been linked with industrial exposure to airborne asbestos. The extensive use of asbestos products in buildings has raised concerns about the widespread exposure of the general public to asbestos in nonoccupational settings. The presence of asbestos in a building does not necessarily mean that significant exposure of the occupants of the building has occurred, but it is important that the asbestos be monitored regularly to ensure that fibers do not become airborne. If ACM are contained within a matrix and not disturbed, exposure is unlikely. However, if the asbestos becomes friable (crumbling) or if building maintenance, repair, renovation or other activities disturb ACM, airborne asbestos fibers may be a source of exposure to the occupants of the building. Currently, asbestos exposure assessment is conducted by a phase contrast light microscope (PCM) technique. Due to its inherent limitation in resolution and the generic counting rules used, analysis by the PCM method underestimates the airborne asbestos fiber concentration as compared to analysis by transmission electron microscopy (TEM). It is important that the air monitoring results analyzed by PCM be interpreted carefully in conjunction with a survey by a professional to judge the physical condition of the ACM in buildings. Exposure levels to airborne asbestos fibers vary from day to day and depend on the physical condition of the material involved and the type of operating and maintenance program in place.(ABSTRACT TRUNCATED AT 250 WORDS)

Development of a spatial stochastic multimedia exposure model to assess population exposure at a regional scale.

Science.gov (United States)

Caudeville, Julien; Bonnard, Roseline; Boudet, Céline; Denys, Sébastien; Govaert, Gérard; Cicolella, André

2012-08-15

Analyzing the relationship between the environment and health has become a major focus of public health efforts in France, as evidenced by the national action plans for health and the environment. These plans have identified the following two priorities: - identify and manage geographic areas where hotspot exposures are a potential risk to human health; and - reduce exposure inequalities. The aim of this study is to develop a spatial stochastic multimedia exposure model for detecting vulnerable populations and analyzing exposure determinants at a fine resolution and regional scale. A multimedia exposure model was developed by INERIS to assess the transfer of substances from the environment to humans through inhalation and ingestion pathways. The RESPIR project adds a spatial dimension by linking GIS (Geographic Information System) to the model. Tools are developed using modeling, spatial analysis and geostatistic methods to build and discretize interesting variables and indicators from different supports and resolutions on a 1-km(2) regular grid. We applied this model to the risk assessment of exposure to metals (cadmium, lead and nickel) using data from a region in France (Nord-Pas-de-Calais). The considered exposure pathways include the atmospheric contaminant inhalation and ingestion of soil, vegetation, meat, egg, milk, fish and drinking water. Exposure scenarios are defined for different reference groups (age, dietary properties, and the fraction of food produced locally). The two largest risks correspond to an ancient industrial site (Metaleurop) and the Lille agglomeration. In these areas, cadmium, vegetation ingestion and soil contamination are the principal determinants of the computed risk. Copyright © 2012 Elsevier B.V. All rights reserved.

Assessment of mankind's exposure through his environment: new tools and aid to decision - Colloquium report

International Nuclear Information System (INIS)

Thierry-Mieg, Morgane; Rousset, Marine; Varkados-Lemarechal, Margaret

2012-01-01

During this colloquium, the different sessions addressed environmental measurement strategies to assess mankind's exposure, the use and the interpretation of exposure bio-markers, the estimation and reconstruction of exposures (integrated modelling, model-measurement coupling), the organization and motives of dialogue between involved parties. Round tables addressed topics such as: measurement strategies and objectives, bio-availability of soil pollutants, approaches and tools for exposure assessment, new methodological strategies for the assessment of chemical exposure, interpretation of bio-markers, reference toxicological values, interest of bio-monitoring in professional environment, transcriptomic analysis, evolutions in the characterization of genotoxic hazards, a tool for the assessment of the exposure of newborn children to pesticides, and so on

Methyldibromo glutaronitrile: clinical experience and exposure-based risk assessment.

Science.gov (United States)

Zachariae, Claus; Rastogi, Suresh; Devantier, Charlotte; Menné, Torkil; Johansen, Jeanne Duus

2003-03-01

In the year 2000, the level of methyldibromo glutaronitrile (MDGN) allergy in dermatology clinics in Europe exceeded the level of allergies to all other preservatives, with a prevalence of 3.5%. In the present study, cases of primary sensitization and elicitation to MDGN due to cosmetic products were collected over an 8-month period at the Department of Dermatology, Gentofte University Hospital. The aim was to identify the products related to hand eczema, assess exposure to MDGN in these products and relate the findings to results from a newly developed updated risk assessment model for contact allergy. Out of 24 patients with a positive patch test to MDGN, 17 patients with hand eczema were identified. In 11 of these patients, cosmetic products used in relation to the onset of the disease were shown to contain MDGN (65%). In 8 of these 11 cases, primary sensitization was probable, 5 due to hand/body lotions and 3 due to lotions and/or liquid hand soap. Chemical analysis of 12 products showed that lotions contained 149-390 ppm of MDGN, liquid hand soap 144-399 ppm, a rinsing cream 293 ppm and shampoos 78-79 ppm. The shampoo exposure was not of certain relevance to the eczema. Applying the newly developed updated risk assessment model showed that the concentrations of MDGN in lotions of 149-390 ppm exceeded the calculated maximum acceptable exposure level for MDGN, which would be expected to lead to sensitization in consumers using such products, as seen in the current study. The present cases and updated exposure-based risk assessment process add to the evidence and need for re-defining safe-use concentrations of MDGN in cosmetic products.

Harmonization of future needs for dermal exposure assessment and modeling : a workshop report

NARCIS (Netherlands)

Marquart, H.; Maidment, S.; Mcclaflin, J.L.; Fehrenbacher, M.C.

2001-01-01

Dermal exposure assessment and modeling is still in early phases of development. This article presents the results of a workshop organized to harmonize the future needs in this field. Methods for dermal exposure assessment either assess the mass of contaminant that is transferred to the skin, or the

A spatiotemporal multi-hazard exposure assessment based on property data

Science.gov (United States)

Fuchs, Sven; Keiler, Margreth; Zischg, Andreas

2016-04-01

The paper presents a nation-wide spatially explicit object-based assessment of buildings and citizens exposed to natural hazards in Austria, including river flooding, torrential flooding, and snow avalanches. The assessment was based on two different datasets, (a) hazard information providing input to the exposure of elements at risk, and (b) information on the building stock combined from different spatial data available on the national level. Hazard information was compiled from two different sources. For torrential flooding and snow avalanches available local-scale hazard maps were used, and for river flooding the results of the countrywide flood modelling eHORA were available. Information on the building stock contained information on the location and size of each building, as well as on the building category and the construction period. Additional information related to the individual floors, such as their height and net area, main purpose and configuration, was included for each property. Moreover, this dataset has an interface to the population register and allowed therefore retrieving the number of primary residents for each building. With the exception of sacral buildings, an economic module was used to compute the monetary value of buildings using (a) the information of the building register such as building type, number of storeys and utilisation, and (b) regionally averaged construction costs. It is shown that the repeatedly-stated assumption of increasing exposure due to continued population growth and related increase in assets has to be carefully evaluated by the local development of building stock. While some regions have shown a clearly above-average increase in assets, other regions were characterised by a below-average development. This mirrors the topography of the country, but also the different economic activities. While hotels and hostels are extraordinary prone to torrential flooding, commercial buildings as well as buildings used for

Development of exposure scenarios for CERCLA risk assessments at the Savannah River Site

International Nuclear Information System (INIS)

Nix, D.W.; Immel, J.W.; Phifer, M.A.

1992-01-01

A CERCLA Baseline Risk Assessment (BRA) is performed to determine if there are any potential risks to human health and the environment from waste unit at SRS. The SRS has numerous waste units to evaluate in the RFMU and CMS/FS programs and, in order to provide a consistent approach, four standard exposure scenarios were developed for exposure assessments to be used in human health risk assessments. The standard exposure scenarios are divided into two temporal categories: (a) Current Land Use in the BRA, and (b) Future Land Use in the RERA. The Current Land Use scenarios consist of the evaluation of human health risk for Industrial Exposure (of a worker not involved in waste unit characterization or remediation), a Trespasser, a hypothetical current On-site Resident, and an Off-site Resident. The Future Land Use scenario considers exposure to an On-site Resident following termination of institutional control in the absence of any remedial action (No Action Alternative), as well as evaluating potential remedial alternatives against the four scenarios from the BRA. A critical facet in the development of a BRA or RERA is the scoping of exposure scenarios that reflect actual conditions at a waste unit, rather than using factors such as EPA Standard Default Exposure Scenarios (OSWER Directive 9285.6-03) that are based on upper-bound exposures that tend to reflect worst case conditions. The use of site-specific information for developing risk assessment exposure scenarios will result in a more realistic estimate of Reasonable Maximum Exposure for SRS waste units

Development of exposure scenarios for CERCLA risk assessments at the Savannah River Site

Energy Technology Data Exchange (ETDEWEB)

Nix, D.W.; Immel, J.W. [Westinghouse Savannah River Co., Aiken, SC (United States); Phifer, M.A. [Tennessee Univ., Knoxville, TN (United States). Dept. of Civil Engineering

1992-12-31

A CERCLA Baseline Risk Assessment (BRA) is performed to determine if there are any potential risks to human health and the environment from waste unit at SRS. The SRS has numerous waste units to evaluate in the RFMU and CMS/FS programs and, in order to provide a consistent approach, four standard exposure scenarios were developed for exposure assessments to be used in human health risk assessments. The standard exposure scenarios are divided into two temporal categories: (a) Current Land Use in the BRA, and (b) Future Land Use in the RERA. The Current Land Use scenarios consist of the evaluation of human health risk for Industrial Exposure (of a worker not involved in waste unit characterization or remediation), a Trespasser, a hypothetical current On-site Resident, and an Off-site Resident. The Future Land Use scenario considers exposure to an On-site Resident following termination of institutional control in the absence of any remedial action (No Action Alternative), as well as evaluating potential remedial alternatives against the four scenarios from the BRA. A critical facet in the development of a BRA or RERA is the scoping of exposure scenarios that reflect actual conditions at a waste unit, rather than using factors such as EPA Standard Default Exposure Scenarios (OSWER Directive 9285.6-03) that are based on upper-bound exposures that tend to reflect worst case conditions. The use of site-specific information for developing risk assessment exposure scenarios will result in a more realistic estimate of Reasonable Maximum Exposure for SRS waste units.

An assessment of residential exposure to environmental noise at a shipping port.

Science.gov (United States)

Murphy, Enda; King, Eoin A

2014-02-01

The World Health Organisation has recently acknowledged that contrary to the trend for other environmental stressors, noise exposure is increasing in Europe. However, little research has been conducted on environmental noise exposure to handling activity at shipping ports. This paper reports on research examining the extent of noise exposure for residents within the vicinity of Dublin Port, Ireland using the nation's largest port terminal as a proxy for port noise. In order to assess the level of exposure in the area, long-term measurements were undertaken at the most exposed residential façade for a period of 45days to determine the extent of night-time exposure that was above levels recommended by the World Health Organisation. The indicators L90, Leq and LMax were used to determine exposure levels. The results show that exposure is above night-time guideline limits set down by the WHO, above Irish levels for the assessment of noise mitigation and highlight the extent to which port noise can be a significant environmental stressor. The research also investigated the extent of low-frequency noise (which is associated with greater health issues) from night-time port handling activity and found a significant low-frequency component indicating the negative health issues that might arise from port noise exposure more generally. We also undertook semi-structured interviews with residents to qualitatively assess the self-reported impact of prolonged night-time noise exposure for local residents. Copyright © 2013 Elsevier Ltd. All rights reserved.

Exposure assessment strategies for non-routine work operations (NORWO)

International Nuclear Information System (INIS)

Lew, V.; Johnson, J.; Chiusano, S.; McLouth, L.

1993-01-01

This meeting is the second in a series of a cooperative effort between the Industrial Hygiene Division of the Office of Health (EH-40) and the Office of Oversight (EM-23) to gain input for the development of a section on NORWO exposure assessment in the Exposure Assessment Strategies and HAZWOPER technical guidance manuals. The first day of the meeting was dedicated to a seminar relating to AIHA Strategy for Occupational Exposure Assessment to NORWO situations. Jeff Miller and Tom Weeda of Radian were the course instructors. The course covered how the elements of basic characterization, prioritization, monitoring and decision making could apply to NORWO situations. Several examples of applications of statistical analysis for decision making were illustrated. In addition, the seminar brought forth some points that need additional examination before the strategy can be applied to NORWO. They are: should qualitative and semi-quantitative data be applied to statistical decision making; should professional judgment be balanced with an acceptable degree of statistical certainty; and the need for development of a standardized application of statistics for the DOE Health ampersand Safety community. The remaining two days of the meeting were devoted to the continued development of guidelines to measure and document, in a technically correct and consistent manner, the exposures DOE environmental restoration and waste management (ERWM) workers receive during NORWO and reflects the perspectives and experiences of the attendees. Formal presentations were given by representatives from Hanford and INEL

Advances in exposure and toxicity assessment of particulate matter: An overview of presentations at the 2009 Toxicology and Risk Assessment Conference

International Nuclear Information System (INIS)

Gunasekar, Palur G.; Stanek, Lindsay W.

2011-01-01

The 2009 Toxicology and Risk Assessment Conference (TRAC) session on 'Advances in Exposure and Toxicity Assessment of Particulate Matter' was held in April 2009 in West Chester, OH. The goal of this session was to bring together toxicology, geology and risk assessment experts from the Department of Defense and academia to examine issues in exposure assessment and report on recent epidemiological findings of health effects associated with particulate matter (PM) exposure. Important aspects of PM exposure research are to detect and monitor low levels of PM with various chemical compositions and to assess the health risks associated with these exposures. As part of the overall theme, some presenters discussed collection methods for sand and dust from Iraqi and Afghanistan regions, health issues among deployed personnel, and future directions for risk assessment research among these populations. The remaining speakers focused on the toxicity of ultrafine PM and the characterization of aerosols generated during ballistic impacts of tungsten heavy alloys.

A Review of Exposure Assessment Methods in Epidemiological Studies on Incinerators

Directory of Open Access Journals (Sweden)

Michele Cordioli

2013-01-01

Full Text Available Incineration is a common technology for waste disposal, and there is public concern for the health impact deriving from incinerators. Poor exposure assessment has been claimed as one of the main causes of inconsistency in the epidemiological literature. We reviewed 41 studies on incinerators published between 1984 and January 2013 and classified them on the basis of exposure assessment approach. Moreover, we performed a simulation study to explore how the different exposure metrics may influence the exposure levels used in epidemiological studies. 19 studies used linear distance as a measure of exposure to incinerators, 11 studies atmospheric dispersion models, and the remaining 11 studies a qualitative variable such as presence/absence of the source. All reviewed studies utilized residence as a proxy for population exposure, although residence location was evaluated with different precision (e.g., municipality, census block, or exact address. Only one study reconstructed temporal variability in exposure. Our simulation study showed a notable degree of exposure misclassification caused by the use of distance compared to dispersion modelling. We suggest that future studies (i make full use of pollution dispersion models; (ii localize population on a fine-scale; and (iii explicitly account for the presence of potential environmental and socioeconomic confounding.

Assessment of human exposure to environmental sources of nickel in Europe: Inhalation exposure.

Science.gov (United States)

Buekers, Jurgen; De Brouwere, Katleen; Lefebvre, Wouter; Willems, Hanny; Vandenbroele, Marleen; Van Sprang, Patrick; Eliat-Eliat, Maxime; Hicks, Keegan; Schlekat, Christian E; Oller, Adriana R

2015-07-15

The paper describes the inhalation nickel (Ni) exposure of humans via the environment for the regional scale in the EU, together with a tiered approach for assessing additional local exposure from industrial emissions. The approach was designed, in the context of REACH, for the purpose of assessing and controlling emissions and air quality in the neighbourhood of Ni producers and downstream users. Two Derived No Effect Level (DNEL) values for chronic inhalation exposure to total Ni in PM10 (20 and 60ngNi/m(3)) were considered. The value of 20ngNi/m(3) is the current EU air quality guidance value. The value of 60ngNi/m(3) is derived here based on recently published Ni data (Oller et al., 2014). Both values are protective for respiratory toxicity and carcinogenicity but differ in the application of toxicokinetic adjustments and cancer threshold considerations. Estimates of air Ni concentrations at the European regional scale were derived from the database of the European Environment Agency. The 50th and 90th percentile regional exposures were below both DNEL values. To assess REACH compliance at the local scale, measured ambient air data are preferred but are often unavailable. A tiered approach for the use of modelled ambient air concentrations was developed, starting with the application of the default EUSES model and progressing to more sophisticated models. As an example, the tiered approach was applied to 33 EU Ni sulphate producers' and downstream users' sites. Applying the EUSES model demonstrates compliance with a DNEL of 60ngNi/m(3) for the majority of sites, while the value of the refined modelling is demonstrated when a DNEL of 20ngNi/m(3) is considered. The proposed approach, applicable to metals in general, can be used in the context of REACH, for refining the risk characterisation and guiding the selection of risk management measures. Copyright © 2015 Elsevier B.V. All rights reserved.

ASSESSING CHILDREN'S EXPOSURES TO PESTICIDES: AN IMPORTANT APPLICATION OF THE STOCHASTIC HUMAN EXPOSURE AND DOSE SIMULATION MODEL (SHEDS)

Science.gov (United States)

Accurately quantifying human exposures and doses of various populations to environmental pollutants is critical for the Agency to assess and manage human health risks. For example, the Food Quality Protection Act of 1996 (FQPA) requires EPA to consider aggregate human exposure ...

Taking Multiple Exposure Into Account Can Improve Assessment of Chemical Risks.

Science.gov (United States)

Clerc, Frédéric; Bertrand, Nicolas Jean Hyacinthe; La Rocca, Bénédicte

2017-12-15

During work, operators may be exposed to several chemicals simultaneously. Most exposure assessment approaches only determine exposure levels for each substance individually. However, such individual-substance approaches may not correctly estimate the toxicity of 'cocktails' of chemicals, as the toxicity of a cocktail may differ from the toxicity of substances on their own. This study presents an approach that can better take into account multiple exposure when assessing chemical risks. Almost 30000 work situations, monitored between 2005 and 2014 and recorded in two French databases, were analysed using MiXie software. The algorithms employed in MiXie can identify toxicological classes associated with several substances, based on the additivity of the selected effects of each substance. The results of our retrospective analysis show that MiXie was able to identify almost 20% more potentially hazardous situations than identified using a single-substance approach. It therefore appears essential to review the ways in which multiple exposure is taken into account during risk assessment. © The Author(s) 2017. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Pro Et Con Analysis Of Occupational Exposure Assessement Tools And Concepts For nanomaterials

DEFF Research Database (Denmark)

Liguori, Biase; Hansen, Steffen Foss; Alstrup Jensen, Keld

. Examples of these include the "Control Banding Nanotool" developed to assess and control the risks of nanomaterials, the more holistic "Swiss precautionary matrix", and the first order quantitative risk assessment tool, NanoSafer. Here we review these and other tools and we discuss various elements...... of the tools (input data requirements, exposure evaluation and handling to reduce exposure) as well as specific pros and cons. Most of the tools provide a transparent and comprehensible approach to assess occupational exposure, but the majority of them are based on purely qualitative considerations about...... occupational settings. A few methods include specific advice on risk management going well beyond what is normally considered in traditional exposure assessment. A disadvantage in most of the existing concepts is that their data requirements are fairly high. In some cases the technical and scientific...

Assessment of occupational exposure due to external sources of radiation. Safety guide

International Nuclear Information System (INIS)

2000-01-01

Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. The three Safety Guides on occupational radiation protection are jointly sponsored by the IAEA and the International Labour Office. The Agency gratefully acknowledges the contribution of the European Commission to the development of the present Safety Guide. The present Safety Guide addresses the assessment of exposure due to external sources of radiation in the workplace. Such exposure can result from a number of sources within a workplace, and the monitoring of workers and the workplace in such situations is an integral part of any occupational radiation protection programme. The assessment of exposure due to external radiation sources depends critically upon knowledge of the radiation type and energy and the conditions of exposure. The present Safety Guide reflects the major changes over the past decade in international practice in external dose assessment

Assessment of occupational exposure due to external sources of radiation. Safety guide

International Nuclear Information System (INIS)

2004-01-01

Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. The three Safety Guides on occupational radiation protection are jointly sponsored by the IAEA and the International Labour Office. The Agency gratefully acknowledges the contribution of the European Commission to the development of the present Safety Guide. The present Safety Guide addresses the assessment of exposure due to external sources of radiation in the workplace. Such exposure can result from a number of sources within a workplace, and the monitoring of workers and the workplace in such situations is an integral part of any occupational radiation protection programme. The assessment of exposure due to external radiation sources depends critically upon knowledge of the radiation type and energy and the conditions of exposure. The present Safety Guide reflects the major changes over the past decade in international practice in external dose assessment

Assessment of occupational exposure due to external sources of radiation. Safety guide

International Nuclear Information System (INIS)

1999-01-01

Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. The three Safety Guides on occupational radiation protection are jointly sponsored by the IAEA and the International Labour Office. The Agency gratefully acknowledges the contribution of the European Commission to the development of the present Safety Guide. The present Safety Guide addresses the assessment of exposure due to external sources of radiation in the workplace. Such exposure can result from a number of sources within a workplace, and the monitoring of workers and the workplace in such situations is an integral part of any occupational radiation protection programme. The assessment of exposure due to external radiation sources depends critically upon knowledge of the radiation type and energy and the conditions of exposure. The present Safety Guide reflects the major changes over the past decade in international practice in external dose assessment

The EPA's human exposure research program for assessing cumulative risk in communities.

Science.gov (United States)

Zartarian, Valerie G; Schultz, Bradley D

2010-06-01

Communities are faced with challenges in identifying and prioritizing environmental issues, taking actions to reduce their exposures, and determining their effectiveness for reducing human health risks. Additional challenges include determining what scientific tools are available and most relevant, and understanding how to use those tools; given these barriers, community groups tend to rely more on risk perception than science. The U.S. Environmental Protection Agency's Office of Research and Development, National Exposure Research Laboratory (NERL) and collaborators are developing and applying tools (models, data, methods) for enhancing cumulative risk assessments. The NERL's "Cumulative Communities Research Program" focuses on key science questions: (1) How to systematically identify and prioritize key chemical stressors within a given community?; (2) How to develop estimates of exposure to multiple stressors for individuals in epidemiologic studies?; and (3) What tools can be used to assess community-level distributions of exposures for the development and evaluation of the effectiveness of risk reduction strategies? This paper provides community partners and scientific researchers with an understanding of the NERL research program and other efforts to address cumulative community risks; and key research needs and opportunities. Some initial findings include the following: (1) Many useful tools exist for components of risk assessment, but need to be developed collaboratively with end users and made more comprehensive and user-friendly for practical application; (2) Tools for quantifying cumulative risks and impact of community risk reduction activities are also needed; (3) More data are needed to assess community- and individual-level exposures, and to link exposure-related information with health effects; and (4) Additional research is needed to incorporate risk-modifying factors ("non-chemical stressors") into cumulative risk assessments. The products of this

Dynamic assessments of population exposure to urban greenspace using multi-source big data.

Science.gov (United States)

Song, Yimeng; Huang, Bo; Cai, Jixuan; Chen, Bin

2018-09-01

A growing body of evidence has proven that urban greenspace is beneficial to improve people's physical and mental health. However, knowledge of population exposure to urban greenspace across different spatiotemporal scales remains unclear. Moreover, the majority of existing environmental assessments are unable to quantify how residents enjoy their ambient greenspace during their daily life. To deal with this challenge, we proposed a dynamic method to assess urban greenspace exposure with the integration of mobile-phone locating-request (MPL) data and high-spatial-resolution remote sensing images. This method was further applied to 30 major cities in China by assessing cities' dynamic greenspace exposure levels based on residents' surrounding areas with different buffer scales (0.5km, 1km, and 1.5km). Results showed that regarding residents' 0.5-km surrounding environment, Wenzhou and Hangzhou were found to be with the greenest exposure experience, whereas Zhengzhou and Tangshan were the least ones. The obvious diurnal and daily variations of population exposure to their surrounding greenspace were also identified to be highly correlated with the distribution pattern of urban greenspace and the dynamics of human mobility. Compared with two common measurements of urban greenspace (green coverage rate and green area per capita), the developed method integrated the dynamics of population distribution and geographic locations of urban greenspace into the exposure assessment, thereby presenting a more reasonable way to assess population exposure to urban greenspace. Additionally, this dynamic framework could hold potential utilities in supporting urban planning studies and environmental health studies and advancing our understanding of the magnitude of population exposure to greenspace at different spatiotemporal scales. Copyright © 2018 Elsevier B.V. All rights reserved.

The Penobscot River and environmental contaminants: Assessment of tribal exposure through sustenance lifeways

Science.gov (United States)

Marshall, Valerie; Kusnierz, Daniel; Hillger, Robert; Ferrario, Joseph; Hughes, Thomas; Diliberto, Janet; Orazio, Carl E.; Dudley, Robert W.; Byrne, Christian; Sugatt, Richard; Warren, Sarah; DeMarini, David; Elskus, Adria; Stodola, Steve; Mierzykowski, Steve; Pugh, Katie; Culbertson, Charles W.

2015-01-01

EPA in collaboration with the Penobscot Indian Nation, U.S. Geological Survey (USGS), Agency for Toxic Substances and Disease Registry (ATSDR), and the U.S. Fish and Wildlife Service (USF&WS) collectively embarked on a four year research study to evaluate the environmental health of the riverine system by targeting specific cultural practices and using traditional science to conduct a preliminary contaminant screening of the flora and fauna of the Penobscot River ecosystem. This study was designed as a preliminary screening to determine if contaminant concentrations in fish, eel, snapping turtle, wood ducks, and plants in Regions of the Penobscot River relevant to where PIN tribal members hunt, fish and gather plants were high enough to be a health concern. This study was not designed to be a statistically validated assessment of contaminant differences among study sites or among species. The traditional methodology for health risk assessment used by the U. S. Environmental Protection Agency (EPA) is based on the use of exposure assumptions (e.g. exposure duration, food ingestion rate, body weight, etc.) that represent the entire American population, either as a central tendency exposure (e.g. average, median) or as a reasonable maximum exposure (e.g. 95% upper confidence limit). Unfortunately, EPA lacked exposure information for assessing health risks for New England regional tribes sustaining a tribal subsistence way of life. As a riverine tribe, the Penobscot culture and traditions are inextricably tied to the Penobscot River watershed. It is through hunting, fishing, trapping, gathering and making baskets, pottery, moccasins, birch-bark canoes and other traditional practices that the Penobscot culture and people are sustained. The Penobscot River receives a variety of pollutant discharges leaving the Penobscot Indian Nation (PIN) questioning the ecological health and water quality of the river and how this may affect the practices that sustain their way of life

Indoor aerosol modeling for assessment of exposure and respiratory tract deposited dose

Science.gov (United States)

Hussein, Tareq; Wierzbicka, Aneta; Löndahl, Jakob; Lazaridis, Mihalis; Hänninen, Otto

2015-04-01

Air pollution is one of the major environmental problems that influence people's health. Exposure to harmful particulate matter (PM) occurs both outdoors and indoors, but while people spend most of their time indoors, the indoor exposures tend to dominate. Moreover, higher PM concentrations due to indoor sources and tightness of indoor environments may substantially add to the outdoor originating exposures. Empirical and real-time assessment of human exposure is often impossible; therefore, indoor aerosol modeling (IAM) can be used as a superior method in exposure and health effects studies. This paper presents a simple approach in combining available aerosol-based modeling techniques to evaluate the real-time exposure and respiratory tract deposited dose based on particle size. Our simple approach consists of outdoor aerosol data base, IAM simulations, time-activity pattern data-base, physical-chemical properties of inhaled aerosols, and semi-empirical deposition fraction of aerosols in the respiratory tract. These modeling techniques allow the characterization of regional deposited dose in any metric: particle mass, particle number, and surface area. The first part of this presentation reviews recent advances in simple mass-balance based modeling methods that are needed in analyzing the health relevance of indoor exposures. The second part illustrates the use of IAM in the calculations of exposure and deposited dose. Contrary to previous methods, the approach presented is a real-time approach and it goes beyond the exposure assessment to provide the required information for the health risk assessment, which is the respiratory tract deposited dose. This simplified approach is foreseen to support epidemiological studies focusing on exposures originating from both indoor and outdoor sources.

Environmental exposure assessment in European birth cohorts: results from the ENRIECO project

Directory of Open Access Journals (Sweden)

Gehring Ulrike

2013-01-01

Full Text Available Abstract Environmental exposures during pregnancy and early life may have adverse health effects. Single birth cohort studies often lack statistical power to tease out such effects reliably. To improve the use of existing data and to facilitate collaboration among these studies, an inventory of the environmental exposure and health data in these studies was made as part of the ENRIECO (Environmental Health Risks in European Birth Cohorts project. The focus with regard to exposure was on outdoor air pollution, water contamination, allergens and biological organisms, metals, pesticides, smoking and second hand tobacco smoke (SHS, persistent organic pollutants (POPs, noise, radiation, and occupational exposures. The review lists methods and data on environmental exposures in 37 European birth cohort studies. Most data is currently available for smoking and SHS (N=37 cohorts, occupational exposures (N=33, outdoor air pollution, and allergens and microbial agents (N=27. Exposure modeling is increasingly used for long-term air pollution exposure assessment; biomonitoring is used for assessment of exposure to metals, POPs and other chemicals; and environmental monitoring for house dust mite exposure assessment. Collaborative analyses with data from several birth cohorts have already been performed successfully for outdoor air pollution, water contamination, allergens, biological contaminants, molds, POPs and SHS. Key success factors for collaborative analyses are common definitions of main exposure and health variables. Our review emphasizes that such common definitions need ideally be arrived at in the study design phase. However, careful comparison of methods used in existing studies also offers excellent opportunities for collaborative analyses. Investigators can use this review to evaluate the potential for future collaborative analyses with respect to data availability and methods used in the different cohorts and to identify potential partners

Quantitative assessment of airborne exposures generated during common cleaning tasks: a pilot study

Directory of Open Access Journals (Sweden)

Perry Melissa J

2010-11-01

Full Text Available Abstract Background A growing body of epidemiologic evidence suggests an association between exposure to cleaning products with asthma and other respiratory disorders. Thus far, these studies have conducted only limited quantitative exposure assessments. Exposures from cleaning products are difficult to measure because they are complex mixtures of chemicals with a range of physicochemical properties, thus requiring multiple measurement techniques. We conducted a pilot exposure assessment study to identify methods for assessing short term, task-based airborne exposures and to quantitatively evaluate airborne exposures associated with cleaning tasks simulated under controlled work environment conditions. Methods Sink, mirror, and toilet bowl cleaning tasks were simulated in a large ventilated bathroom and a small unventilated bathroom using a general purpose, a glass, and a bathroom cleaner. All tasks were performed for 10 minutes. Airborne total volatile organic compounds (TVOC generated during the tasks were measured using a direct reading instrument (DRI with a photo ionization detector. Volatile organic ingredients of the cleaning mixtures were assessed utilizing an integrated sampling and analytic method, EPA TO-17. Ammonia air concentrations were also measured with an electrochemical sensor embedded in the DRI. Results Average TVOC concentrations calculated for 10 minute tasks ranged 0.02 - 6.49 ppm and the highest peak concentrations observed ranged 0.14-11 ppm. TVOC time concentration profiles indicated that exposures above background level remained present for about 20 minutes after cessation of the tasks. Among several targeted VOC compounds from cleaning mixtures, only 2-BE was detectable with the EPA method. The ten minute average 2- BE concentrations ranged 0.30 -21 ppm between tasks. The DRI underestimated 2-BE exposures compared to the results from the integrated method. The highest concentration of ammonia of 2.8 ppm occurred

Comparative Assessment of Particulate Air Pollution Exposure from Municipal Solid Waste Incinerator Emissions

Science.gov (United States)

Ashworth, Danielle C.; Fuller, Gary W.; Toledano, Mireille B.; Font, Anna; Elliott, Paul; Hansell, Anna L.; de Hoogh, Kees

2013-01-01

Background. Research to date on health effects associated with incineration has found limited evidence of health risks, but many previous studies have been constrained by poor exposure assessment. This paper provides a comparative assessment of atmospheric dispersion modelling and distance from source (a commonly used proxy for exposure) as exposure assessment methods for pollutants released from incinerators. Methods. Distance from source and the atmospheric dispersion model ADMS-Urban were used to characterise ambient exposures to particulates from two municipal solid waste incinerators (MSWIs) in the UK. Additionally an exploration of the sensitivity of the dispersion model simulations to input parameters was performed. Results. The model output indicated extremely low ground level concentrations of PM10, with maximum concentrations of incinerator characteristics, magnitude of emissions, and surrounding meteorological and topographical conditions are considered. Reducing exposure misclassification is particularly important in environmental epidemiology to aid detection of low-level risks. PMID:23935644

From eyeballing to statistical modelling : methods for assessment of occupational exposure

NARCIS (Netherlands)

Kromhout, H.

1994-01-01

In this thesis methods for assessment of occupational exposure are evaluated and developed. These methods range from subjective methods (qualitative and semiquantitative) to more objective quantitative methods based on actual measurement of personal exposure to chemical and physical

A margin-of-exposure approach to assessment of noncancer risks of dioxins based on human exposure and response data.

Science.gov (United States)

Aylward, Lesa L; Goodman, Julie E; Charnley, Gail; Rhomberg, Lorenz R

2008-10-01

Risk assessment of human environmental exposure to polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDFs) and other dioxin-like compounds is complicated by several factors, including limitations in measuring intakes because of the low concentrations of these compounds in foods and the environment and interspecies differences in pharmacokinetics and responses. We examined the feasibility of relying directly on human studies of exposure and potential responses to PCDD/PCDFs and related compounds in terms of measured lipid-adjusted concentrations to assess margin of exposure (MOE) in a quantitative, benchmark dose (BMD)-based framework using representative exposure and selected response data sets. We characterize estimated central tendency and upper-bound general U.S. population lipid-adjusted concentrations of PCDD/PCDFs from the 1970s and early 2000s based on available data sets. Estimates of benchmark concentrations for three example responses of interest (induction of cytochrome P4501A2 activity, dental anomalies, and neonatal thyroid hormone alterations) were derived based on selected human studies. The exposure data sets indicate that current serum lipid concentrations in young adults are approximately 6- to 7-fold lower than 1970s-era concentrations. Estimated MOEs for each end point based on current serum lipid concentrations range from 100 for dental anomalies-approximately 6-fold greater than would have existed during the 1970s. Human studies of dioxin exposure and outcomes can be used in a BMD framework for quantitative assessments of MOE. Incomplete exposure characterization can complicate the use of such studies in a BMD framework.

Aggregate exposure pathways in support of risk assessment

Science.gov (United States)

Over time, risk assessment has shifted from establishing relationships between exposure to a single chemical and a resulting adverse health outcome, to evaluating multiple chemicals and disease outcomes simultaneously. As a result, there is an increasing need to better understand...

[Hygiene and legal aspects of occupational exposure assessment to cytostatics].

Science.gov (United States)

Kupczewska-Dobecka, Małgorzata; Pałaszewska-Tkacz, Anna; Czerczak, Sławomir; Konieczko, Katarzyna

2018-01-01

The employers responsibilities for the assessment of occupational exposure to cytostatics in the workplace were analyzed in the light of existing legal regulations. Cytostatics may pose a threat to health and life of workers taking care of patients treated oncologically, i.e., pharmacists, physicians, nurses and other personnel. The significant scale of occupational exposure to cytostatics in Poland is confirmed by the data collected in the Central Register of Data on Exposure to Carcinogenic or Mutagenic Substances, Mixtures, Agents or Technological Processes, maintained by the Nofer Institute of Occupational Medicine, Łódź, Poland. The issue of occupational risk assessment of exposure to cytostatics gives raise to numerous concerns. Polish regulations concerning health protection of employees occupationally exposed to cytostatics are not unequivocal, as they are derived from different areas of the law, especially those applying to hazard classification, labeling and preparation of safety data sheets for cytostatics. There are neither binding occupational exposure limits legally set for active compounds of antineoplastic drugs nor methods for monitoring of these substances concentrations in a worker's breathing zone and biological material. This prevents the employer to carry out the correct assessment of occupational exposure, the results of which are the basis for preparing the proper preventive strategy. In this article the consequences of amendments to the European chemical legislation for employers responsible for adequate protection of health and life of employees exposed to cytostatics, were discussed, as well as some legal changes aimed at a better health and life protection of workers exposed to cytostatics in a workplace were proposed. Med Pr 2018;69(1):77-92. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Radiation in complex exposure situations. Assessing health risks at low levels from concomitant exposures to radiation and chemicals

International Nuclear Information System (INIS)

Hornhardt, S.; Jung, T.; Burkart, W.

2000-01-01

Health effects from exposures to ionizing radiation are in general the result of complex multi-step reaction chains involving changes and responses on the level of molecules, cells, tissues and organisms. In environmental low dose exposure situations ionizing radiation only contributes a small fraction to the life-long attack on DNA by other exogenous and endogenous genotoxins. Nevertheless, efforts to assess and quantify deleterious effects at low exposure levels are directed mainly towards radiation as a single isolated agent, and rarely towards the concomitant presence of other natural and anthropogenic toxicants. Only these combined exposures may lead to observable health risk effects. In addition they might differ from those expected from simple addition of the individual risks due to interaction. The existing data base on combined effects is rudimentary, mainly descriptive and rarely covers exposure ranges large enough to make direct inferences to present day low dose exposure situations. Therefore, any risk assessment will have to consider the question whether combined effects, i.e. interaction between two or more agents will influence the health outcome from specific exposure situations in such a way that predictions derived from simple standard exposure situations would have to be revised. In view of the multitude of possible interactions between the large number of potentially harmful agents in the human environment, descriptive approaches will have to be supplemented by the use of mechanistic models for critical health endpoints such as cancer. Agents will have to be grouped depending on their physical or chemical mode of action at the molecular and cellular level, to generalize and predict the outcome of combined exposures at low exposure levels and the possibility of interactions. (author)

Real-time assessment of exposure dose to workers in radiological environments during decommissioning of nuclear facilities

International Nuclear Information System (INIS)

Jeong, KwanSeong; Choi, ByungSeon; Moon, JeiKwon; Hyun, Dongjun; Lee, Jonghwan; Kim, IkJune; Kim, GeunHo; Seo, JaeSeok; Jeong, SeongYoung; Lee, JungJun; Song, HaeSang; Lee, SangWha; Son, BongKi

2014-01-01

Highlights: • The method of exposure dose assessment to workers during decommissioning of nuclear facilities. • The environments of simulation were designed under a virtual reality. • To assess exposure dose to workers, human model was developed within a virtual reality. - Abstract: This objective of this paper is to develop a method to simulate and assess the exposure dose to workers during decommissioning of nuclear facilities. To simulate several scenarios, decommissioning environments were designed using virtual reality. To assess exposure dose to workers, a human model was also developed using virtual reality. The exposure dose was measured and assessed under the principle of ALARA in accordance with radiological environmental change. This method will make it possible to plan for the exposure dose to workers during decommissioning of nuclear facilities

How Exposure Science can be Integrated into the Assessment ...

Science.gov (United States)

The presentation describes ongoing research in the Rapid Exposure and Dosimetry project funded under the Chemical Safety for Sustainability Research Program of the Office of Research and Development. There is a well known need for information on human exposure to thousands of chemicals, especially with respect to route of exposure. A combination of curation of legacy data, new data collection activities, and mathematical models based both upon statistics (empirical) and mechanism are allowing chemicals to be prioritized for further exposure study. This presentation pays special attention to the opportunities presented by non-targeted screening using mass spectrometry. This is a presentation to the American College of Toxicology annual meeting in Baltimore, Maryland on November 7, 2016. This half hour presentation is part of a session on 21st Century Approaches to Assessing Food Ingredient Safety.

EPHECT III: Health risk assessment of exposure to household consumer products.

Science.gov (United States)

Trantallidi, M; Dimitroulopoulou, C; Wolkoff, P; Kephalopoulos, S; Carrer, P

2015-12-01

In the framework of the EU EPHECT project (Emissions, Exposure Patterns and Health Effects of Consumer Products in the EU), irritative and respiratory effects were assessed in relation to acute (30-min) and long-term (24-h) inhalation exposure to key and emerging indoor air pollutants emitted during household use of selected consumer products. A detailed Health Risk Assessment (HRA) was performed for five selected pollutants of respiratory health relevance, namely acrolein, formaldehyde, naphthalene, d-limonene and α-pinene. For each pollutant, the Critical Exposure Limit (CEL) was compared to indoor air concentrations and exposure estimates for the use of 15 selected consumer products by two population groups (housekeepers and retired people) in the four geographical regions of Europe (North, West, South, East), which were derived previously based on microenvironmental modelling. For the present HRA, health-based CELs were derived for certain compounds in case indoor air quality guidelines were not available by the World Health Organization for end-points relevant to the current study. For each pollutant, the highest indoor air concentrations in each microenvironment and exposure estimates across home microenvironments during the day were lower than the corresponding acute and long-term CELs. However, considerable contributions, especially to acute exposures, were obtained in some cases, such as formaldehyde emissions resulting from single product use of a floor cleaning agent (82% CEL), a candle (10% CEL) and an electric air freshener (17% CEL). Regarding multiple product use, the case of 30-min formaldehyde exposure reaching 34% CEL when eight product classes were used across home microenvironments, i.e. all-purpose/kitchen/floor cleaning agents, furniture/floor polish, combustible/electric air fresheners, and perfume, needs to be highlighted. Such estimated values should be evaluated with caution, as these may be attributed to the exposure scenarios

Father's occupational exposure to carcinogenic agents and childhood acute leukemia: a new method to assess exposure (a case-control study

Directory of Open Access Journals (Sweden)

Rodriguez-Rivera Maria

2008-01-01

Full Text Available Abstract Background Medical research has not been able to establish whether a father's occupational exposures are associated with the development of acute leukemia (AL in their offspring. The studies conducted have weaknesses that have generated a misclassification of such exposure. Occupations and exposures to substances associated with childhood cancer are not very frequently encountered in the general population; thus, the reported risks are both inconsistent and inaccurate. In this study, to assess exposure we used a new method, an exposure index, which took into consideration the industrial branch, specific position, use of protective equipment, substances at work, degree of contact with such substances, and time of exposure. This index allowed us to obtain a grade, which permitted the identification of individuals according to their level of exposure to known or potentially carcinogenic agents that are not necessarily specifically identified as risk factors for leukemia. The aim of this study was to determine the association between a father's occupational exposure to carcinogenic agents and the presence of AL in their offspring. Methods From 1999 to 2000, a case-control study was performed with 193 children who reside in Mexico City and had been diagnosed with AL. The initial sample-size calculation was 150 children per group, assessed with an expected odds ratio (OR of three and a minimum exposure frequency of 15.8%. These children were matched by age, sex, and institution with 193 pediatric surgical patients at secondary-care hospitals. A questionnaire was used to determine each child's background and the characteristics of the father's occupation(s. In order to determine the level of exposure to carcinogenic agents, a previously validated exposure index (occupational exposure index, OEI was used. The consistency and validity of the index were assessed by a questionnaire comparison, the sensory recognition of the work area, and an

Historical Exposures to Chemicals at the Rocky Flats Nuclear Weapons Plant: A Pilot Retrospective Exposure Assessment

Energy Technology Data Exchange (ETDEWEB)

Robertson, Janeen Denise [Univ. of New Mexico, Albuquerque, NM (United States)

1999-02-01

In a mortality study of white males who had worked at the Rocky Flats Nuclear Weapons Plant between 1952 and 1979, an increased number of deaths from benign and unspecified intracranial neoplasms was found. A case-control study nested within this cohort investigated the hypothesis that an association existed between brain tumor death and exposure to either internally deposited plutonium or external ionizing radiation. There was no statistically significant association found between estimated radiation exposure from internally deposited plutonium and the development of brain tumors. Exposure by job or work area showed no significant difference between the cohort and the control groups. An update of the study found elevated risk estimates for (1) all lymphopoietic neoplasms, and (2) all causes of death in employees with body burdens greater than or equal to two nanocuries of plutonium. There was an excess of brain tumors for the entire cohort. Similar cohort studies conducted on worker populations from other plutonium handling facilities have not yet shown any elevated risks for brain tumors. Historically, the Rocky Flats Nuclear Weapons Plant used large quantities of chemicals in their production operations. The use of solvents, particularly carbon tetrachloride, was unique to Rocky Flats. No investigation of the possible confounding effects of chemical exposures was done in the initial studies. The objectives of the present study are to (1) investigate the history of chemical use at the Rocky Flats facility; (2) locate and analyze chemical monitoring information in order to assess employee exposure to the chemicals that were used in the highest volume; and (3) determine the feasibility of establishing a chemical exposure assessment model that could be used in future epidemiology studies.

Prioritizing Chemicals and Data Requirements for Screening-Level Exposure and Risk Assessment

Science.gov (United States)

Brown, Trevor N.; Wania, Frank; Breivik, Knut; McLachlan, Michael S.

2012-01-01

Background: Scientists and regulatory agencies strive to identify chemicals that may cause harmful effects to humans and the environment; however, prioritization is challenging because of the large number of chemicals requiring evaluation and limited data and resources. Objectives: We aimed to prioritize chemicals for exposure and exposure potential and obtain a quantitative perspective on research needs to better address uncertainty in screening assessments. Methods: We used a multimedia mass balance model to prioritize > 12,000 organic chemicals using four far-field human exposure metrics. The propagation of variance (uncertainty) in key chemical information used as model input for calculating exposure metrics was quantified. Results: Modeled human concentrations and intake rates span approximately 17 and 15 orders of magnitude, respectively. Estimates of exposure potential using human concentrations and a unit emission rate span approximately 13 orders of magnitude, and intake fractions span 7 orders of magnitude. The actual chemical emission rate contributes the greatest variance (uncertainty) in exposure estimates. The human biotransformation half-life is the second greatest source of uncertainty in estimated concentrations. In general, biotransformation and biodegradation half-lives are greater sources of uncertainty in modeled exposure and exposure potential than chemical partition coefficients. Conclusions: Mechanistic exposure modeling is suitable for screening and prioritizing large numbers of chemicals. By including uncertainty analysis and uncertainty in chemical information in the exposure estimates, these methods can help identify and address the important sources of uncertainty in human exposure and risk assessment in a systematic manner. PMID:23008278

Prioritizing chemicals and data requirements for screening-level exposure and risk assessment.

Science.gov (United States)

Arnot, Jon A; Brown, Trevor N; Wania, Frank; Breivik, Knut; McLachlan, Michael S

2012-11-01

Scientists and regulatory agencies strive to identify chemicals that may cause harmful effects to humans and the environment; however, prioritization is challenging because of the large number of chemicals requiring evaluation and limited data and resources. We aimed to prioritize chemicals for exposure and exposure potential and obtain a quantitative perspective on research needs to better address uncertainty in screening assessments. We used a multimedia mass balance model to prioritize > 12,000 organic chemicals using four far-field human exposure metrics. The propagation of variance (uncertainty) in key chemical information used as model input for calculating exposure metrics was quantified. Modeled human concentrations and intake rates span approximately 17 and 15 orders of magnitude, respectively. Estimates of exposure potential using human concentrations and a unit emission rate span approximately 13 orders of magnitude, and intake fractions span 7 orders of magnitude. The actual chemical emission rate contributes the greatest variance (uncertainty) in exposure estimates. The human biotransformation half-life is the second greatest source of uncertainty in estimated concentrations. In general, biotransformation and biodegradation half-lives are greater sources of uncertainty in modeled exposure and exposure potential than chemical partition coefficients. Mechanistic exposure modeling is suitable for screening and prioritizing large numbers of chemicals. By including uncertainty analysis and uncertainty in chemical information in the exposure estimates, these methods can help identify and address the important sources of uncertainty in human exposure and risk assessment in a systematic manner.

Human health risk assessment related to cyanotoxins exposure.

Science.gov (United States)

Funari, Enzo; Testai, Emanuela

2008-01-01

This review focuses on the risk assessment associated with human exposure to cyanotoxins, secondary metabolites of an ubiquitous group of photosynthetic procariota. Cyanobacteria occur especially in eutrophic inland and coastal surface waters, where under favorable conditions they attain high densities and may form blooms and scums. Cyanotoxins can be grouped according to their biological effects into hepatotoxins, neurotoxins, cytotoxins, and toxins with irritating potential, also acting on the gastrointestinal system. The chemical and toxicological properties of the main cyanotoxins, relevant for the evaluation of possible risks for human health, are presented. Humans may be exposed to cyanotoxins via several routes, with the oral one being by far the most important, occurring by ingesting contaminated drinking water, food, some dietary supplements, or water during recreational activities. Acute and short-term toxic effects have been associated in humans with exposure to high levels of cyanotoxins in drinking and bathing waters. However, the chronic exposure to low cyanotoxin levels remains a critical issue. This article identifies the actual risky exposure scenarios, provides toxicologically derived reference values, and discusses open issues and research needs.

Dynamic assessment of exposure to air pollution using mobile phone data.

Science.gov (United States)

Dewulf, Bart; Neutens, Tijs; Lefebvre, Wouter; Seynaeve, Gerdy; Vanpoucke, Charlotte; Beckx, Carolien; Van de Weghe, Nico

2016-04-21

Exposure to air pollution can have major health impacts, such as respiratory and cardiovascular diseases. Traditionally, only the air pollution concentration at the home location is taken into account in health impact assessments and epidemiological studies. Neglecting individual travel patterns can lead to a bias in air pollution exposure assessments. In this work, we present a novel approach to calculate the daily exposure to air pollution using mobile phone data of approximately 5 million mobile phone users living in Belgium. At present, this data is collected and stored by telecom operators mainly for management of the mobile network. Yet it represents a major source of information in the study of human mobility. We calculate the exposure to NO2 using two approaches: assuming people stay at home the entire day (traditional static approach), and incorporating individual travel patterns using their location inferred from their use of the mobile phone network (dynamic approach). The mean exposure to NO2 increases with 1.27 μg/m(3) (4.3%) during the week and with 0.12 μg/m(3) (0.4%) during the weekend when incorporating individual travel patterns. During the week, mostly people living in municipalities surrounding larger cities experience the highest increase in NO2 exposure when incorporating their travel patterns, probably because most of them work in these larger cities with higher NO2 concentrations. It is relevant for health impact assessments and epidemiological studies to incorporate individual travel patterns in estimating air pollution exposure. Mobile phone data is a promising data source to determine individual travel patterns, because of the advantages (e.g. low costs, large sample size, passive data collection) compared to travel surveys, GPS, and smartphone data (i.e. data captured by applications on smartphones).

Lead concentrations and risk exposure assessment in surface soils ...

African Journals Online (AJOL)

Lead concentrations and risk exposure assessment in surface soils at residential lands previously used for auto-mechanic and auto-welding activities in Port Harcourt, Nigeria. ... Journal of Applied Sciences and Environmental Management.

Sensitivity Analysis of Personal Exposure Assessment Using a Computer Simulated Person

DEFF Research Database (Denmark)

Brohus, Henrik; Jensen, H. K.

2009-01-01

The paper considers uncertainties related to personal exposure assessment using a computer simulated person. CFD is used to simulate a uniform flow field around a human being to determine the personal exposure to a contaminant source. For various vertical locations of a point contaminant source...... three additional factors are varied, namely the velocity, details of the computer simulated person, and the CFD model of the wind channel. The personal exposure is found to be highly dependent on the relative source location. Variation in the range of two orders of magnitude is found. The exposure...

Energy expenditure in adults living in developing compared with industrialized countries: a meta-analysis of doubly labeled water studies.

Science.gov (United States)

Dugas, Lara R; Harders, Regina; Merrill, Sarah; Ebersole, Kara; Shoham, David A; Rush, Elaine C; Assah, Felix K; Forrester, Terrence; Durazo-Arvizu, Ramon A; Luke, Amy

2011-02-01

There is an assumption that people in developing countries have a higher total energy expenditure (TEE) and physical activity level (PAL) than do people in developed nations, but few objective data for this assertion exist. We conducted a meta-analysis of TEE and PAL by using data from countries that have a low or middle human development index (HDI) compared with those with a high HDI to better understand how energy-expenditure variables are associated with development status and population differences in body size. We performed a literature search for studies in which energy expenditure was measured by using doubly labeled water. Mean data on age, weight, body mass index (BMI; in kg/m(2)), TEE, and PAL were extracted, and HDI status was assessed. Pooled estimates of the mean effect by sex were obtained, and the extent to which age, weight, HDI status, and year of publication explained heterogeneity was assessed. A total of 98 studies (14 studies from low- or middle-HDI countries) that represented 183 cohorts and 4972 individuals were included. Mean (±SE) BMI was lower in countries with a low or middle HDI than in those with a high HDI for both men and women (22.7 ± 1.0 compared with 26.0 ± 0.7, respectively, in men and 24.3 ± 0.7 compared with 26.6 ± 0.4, respectively, in women). In meta-regression models, there was an inverse association of age (P developing and industrialized countries, which calls into question the role of energy expenditure in the cause of obesity at the population level.

Probabilistic exposure assessment to face and oral care cosmetic products by the French population.

Science.gov (United States)

Bernard, A; Dornic, N; Roudot, Ac; Ficheux, As

2018-01-01

Cosmetic exposure data for face and mouth are limited in Europe. The aim of the study was to assess the exposure to face cosmetics using recent French consumption data (Ficheux et al., 2016b, 2015). Exposure was assessed using a probabilistic method for thirty one face products from four lines of products: cleanser, care, make-up and make-up remover products and two oral care products. Probabilistic exposure was assessed for different subpopulation according to sex and age in adults and children. Pregnant women were also studied. The levels of exposure to moisturizing cream, lip balm, mascara, eyeliner, cream foundation, toothpaste and mouthwash were higher than the values currently used by the Scientific Committee on Consumer Safety (SCCS). Exposure values found for eye shadow, lipstick, lotion and milk (make-up remover) were lower than SCCS values. These new French exposure values will be useful for safety assessors and for safety agencies in order to protect the general population and the at risk populations. Copyright © 2017. Published by Elsevier Ltd.

Assessment of occupational exposure due to intakes of radionuclides. Safety guide

International Nuclear Information System (INIS)

2004-01-01

Occupational exposure due to radioactive materials can occur as a result of various human activities. These include work associated with the different stages of the nuclear fuel cycle, the use of radioactive sources in medicine, scientific research, agriculture and industry, and occupations which involve the handling of materials containing enhanced concentrations of naturally occurring radionuclides. In order to control this exposure, it is necessary to be able to assess the magnitude of the doses involved. Three interrelated Safety Guides, prepared jointly by the IAEA and the International Labour Office (ILO), provide guidance on the application of the requirements of the Basic Safety Standards with respect to occupational exposure. Reference [3] gives general advice on the exposure conditions for which monitoring programmes should be set up to assess radiation doses arising from external radiation and from intakes of radionuclides by workers. More specific guidance on the assessment of doses from external sources of radiation can be found in Ref. [4] and the present Safety Guide deals with intakes of radioactive materials. Recommendations related to occupational radiation protection have also been developed by the International Commission on Radiological Protection (ICRP) [5]. These and other current recommendations of the ICRP [6] have been taken into account in preparing this Safety Guide. The purpose of this Safety Guide is to provide guidance for regulatory authorities on conducting assessments of intakes of radioactive material arising from occupational exposure. This Guide will also be useful to those concerned with the planning, management and operation of occupational monitoring programmes, and to those involved in the design of equipment for use in internal dosimetry and workplace monitoring

Assessment of occupational exposure due to intakes of radionuclides. Safety guide

International Nuclear Information System (INIS)

2000-01-01

Occupational exposure due to radioactive materials can occur as a result of various human activities. These include work associated with the different stages of the nuclear fuel cycle, the use of radioactive sources in medicine, scientific research, agriculture and industry, and occupations which involve the handling of materials containing enhanced concentrations of naturally occurring radionuclides. In order to control this exposure, it is necessary to be able to assess the magnitude of the doses involved. Three interrelated Safety Guides, prepared jointly by the IAEA and the International Labour Office (ILO), provide guidance on the application of the requirements of the Basic Safety Standards with respect to occupational exposure. Reference [3] gives general advice on the exposure conditions for which monitoring programmes should be set up to assess radiation doses arising from external radiation and from intakes of radionuclides by workers. More specific guidance on the assessment of doses from external sources of radiation can be found in Ref. [4] and the present Safety Guide deals with intakes of radioactive materials. Recommendations related to occupational radiation protection have also been developed by the International Commission on Radiological Protection (ICRP) [5]. These and other current recommendations of the ICRP [6] have been taken into account in preparing this Safety Guide. The purpose of this Safety Guide is to provide guidance for regulatory authorities on conducting assessments of intakes of radioactive material arising from occupational exposure. This Guide will also be useful to those concerned with the planning, management and operation of occupational monitoring programmes, and to those involved in the design of equipment for use in internal dosimetry and workplace monitoring

Assessment of occupational exposure due to intakes of radionuclides. Safety guide

International Nuclear Information System (INIS)

2001-01-01

Occupational exposure due to radioactive materials can occur as a result of various human activities. These include work associated with the different stages of the nuclear fuel cycle, the use of radioactive sources in medicine, scientific research, agriculture and industry, and occupations which involve the handling of materials containing enhanced concentrations of naturally occurring radionuclides. In order to control this exposure, it is necessary to be able to assess the magnitude of the doses involved. Three interrelated Safety Guides, prepared jointly by the IAEA and the International Labour Office (ILO), provide guidance on the application of the requirements of the Basic Safety Standards with respect to occupational exposure. Reference [3] gives general advice on the exposure conditions for which monitoring programmes should be set up to assess radiation doses arising from external radiation and from intakes of radionuclides by workers. More specific guidance on the assessment of doses from external sources of radiation can be found in Ref. [4] and the present Safety Guide deals with intakes of radioactive materials. Recommendations related to occupational radiation protection have also been developed by the International Commission on Radiological Protection (ICRP) [5]. These and other current recommendations of the ICRP [6] have been taken into account in preparing this Safety Guide. The purpose of this Safety Guide is to provide guidance for regulatory authorities on conducting assessments of intakes of radioactive material arising from occupational exposure. This Guide will also be useful to those concerned with the planning, management and operation of occupational monitoring programmes, and to those involved in the design of equipment for use in internal dosimetry and workplace monitoring

Assessment of occupational exposure due to intakes of radionuclides. Safety guide

International Nuclear Information System (INIS)

2002-01-01

Occupational exposure due to radioactive materials can occur as a result of various human activities. These include work associated with the different stages of the nuclear fuel cycle, the use of radioactive sources in medicine, scientific research, agriculture and industry, and occupations which involve the handling of materials containing enhanced concentrations of naturally occurring radionuclides. In order to control this exposure, it is necessary to be able to assess the magnitude of the doses involved. Three interrelated Safety Guides, prepared jointly by the IAEA and the International Labour Office (ILO), provide guidance on the application of the requirements of the Basic Safety Standards with respect to occupational exposure. Reference [3] gives general advice on the exposure conditions for which monitoring programmes should be set up to assess radiation doses arising from external radiation and from intakes of radionuclides by workers. More specific guidance on the assessment of doses from external sources of radiation can be found in Ref. [4] and the present Safety Guide deals with intakes of radioactive materials. Recommendations related to occupational radiation protection have also been developed by the International Commission on Radiological Protection (ICRP) [5]. These and other current recommendations of the ICRP [6] have been taken into account in preparing this Safety Guide. The purpose of this Safety Guide is to provide guidance for regulatory authorities on conducting assessments of intakes of radioactive material arising from occupational exposure. This Guide will also be useful to those concerned with the planning, management and operation of occupational monitoring programmes, and to those involved in the design of equipment for use in internal dosimetry and workplace monitoring

Assessment of occupational exposure due to intakes of radionuclides. Safety guide

International Nuclear Information System (INIS)

1999-01-01

Occupational exposure due to radioactive materials can occur as a result of various human activities. These include work associated with the different stages of the nuclear fuel cycle, the use of radioactive sources in medicine, scientific research, agriculture and industry, and occupations which involve the handling of materials containing enhanced concentrations of naturally occurring radionuclides. In order to control this exposure, it is necessary to be able to assess the magnitude of the doses involved. Three interrelated Safety Guides, prepared jointly by the IAEA and the International Labour Office (ILO), provide guidance on the application of the requirements of the Basic Safety Standards with respect to occupational exposure. Reference [3] gives general advice on the exposure conditions for which monitoring programmes should be set up to assess radiation doses arising from external radiation and from intakes of radionuclides by workers. More specific guidance on the assessment of doses from external sources of radiation can be found in Ref. [4] and the present Safety Guide deals with intakes of radioactive materials. Recommendations related to occupational radiation protection have also been developed by the International Commission on Radiological Protection (ICRP) [5]. These and other current recommendations of the ICRP [6] have been taken into account in preparing this Safety Guide. The purpose of this Safety Guide is to provide guidance for regulatory authorities on conducting assessments of intakes of radioactive material arising from occupational exposure. This Guide will also be useful to those concerned with the planning, management and operation of occupational monitoring programmes, and to those involved in the design of equipment for use in internal dosimetry and workplace monitoring

Assessment of exposure-response functions for rocket-emission toxicants

National Research Council Canada - National Science Library

Subcommittee on Rocket-Emission Toxicants, National Research Council

... aborted launch that results in a rocket being destroyed near the ground. Assessment of Exposure-Response Functions for Rocket-Emmission Toxicants evaluates the model and the data used for three rocket emission toxicants...

Assessment of exposure for baby cosmetic care products in a Korean population.

Science.gov (United States)

Lee, Eunyoung; Yun, Jongbok; Ha, Jaehyoun; Park, Byung Cheol; Park, Gyeong Hun; Kim, Hak Rim; Hong, Seung Phil; Kim, Kyu Bong; Kim, Myung Hwa

2017-08-01

Assessment of exposure to cosmetic products via the skin is important for evaluating the risks associated with the use of these products. However, few exposure studies have been conducted with babies, particularly in Asia. The aim of our study was to assess the exposure to selected cosmetic products in babies under the age of 36 months, over both winter and summer months. We evaluated exposure for seven cosmetic baby care products identified in a previous web-based survey as being commonly used by Korean parents. Parents were instructed to use their baby's products as per their usual habit, recording usage for each product on a daily basis over a 14-day period. Products were weighed at the start and completion of the study, with the change in weight used to determine the total amount of product used. Descriptive statistics for daily exposure were calculated. In this study, daily exposure for different products was influenced by sex, age groups and seasons. Of specific note, 3.51% of the lotion in a wet wipe was transferred to the skin. In conclusion, we provide baseline exposure data for baby products, with exposure being based on parents' usual use of the products. Copyright © 2017 Elsevier Ltd. All rights reserved.

Biocides Steering Group on human exposure assessment: a preliminary report.

Science.gov (United States)

van Hemmen, J J

1999-06-30

In a project granted by DG XI of the European Commission, it is attempted to collate experimental and theoretical data on human (workers and consumers) exposure assessment to biocidal products, and to outline the methodology for sampling and measurement. On the basis of the available evidence, approaches are presented for the exposure assessment to be used for estimation of risks in authorization procedures under the recently accepted Directive 98/8/EC. Gaps in knowledge are indicated, making it possible to study the issues involved in a comprehensive and cost-effective way. Some recommendations are given on how to best do this. The current project has been detailed in a final report.

Exposure data and risk indicators for safety performance assessment in Europe.

NARCIS (Netherlands)

Papadimitriou, E. Yannis, G. Bijleveld, F.D. & Cardoso, J.L.

2013-01-01

The objective of this paper is the analysis of the state-of-the-art in risk indicators and exposure data for safety performance assessment in Europe, in terms of data availability, collection methodologies and use. More specifically, the concepts of exposure and risk are explored, as well as the

OccIDEAS: An Innovative Tool to Assess Past Asbestos Exposure in the Australian Mesothelioma Registry

Directory of Open Access Journals (Sweden)

Ewan MacFarlane

2012-03-01

Full Text Available Malignant mesothelioma is an uncommon but rapidly fatal disease for which the principal aetiological agent is exposure to asbestos. Mesothelioma is of particular significance in Australia where asbestos use was very widespread from the 1950s until the 1980s. Exposure to asbestos includes occupational exposure associated with working with asbestos or in workplaces where asbestos is used and also ‘take-home’ exposure of family members of asbestos exposed workers. Asbestos exposure may also be nonoccupational, occurring as a consequence of using asbestos products in non-occupational contexts and passive exposure is also possible, such as exposure to asbestos products in the built environment or proximity to an environmental source of exposure, for example an asbestos production plant. The extremely long latency period for this disease makes exposure assessment problematic in the context of a mesothelioma registry. OccIDEAS, a recently developed online tool for retrospective exposure assessment, has been adapted for use in the Australian Mesothelioma Registry (AMR to enable systematic retrospective exposure assessment of consenting cases. Twelve occupational questionnaire modules and one non-occupational module have been developed for the AMR, which form the basis of structured interviews using OccIDEAS, which also stores collected data and provides a framework for generating metrics of exposure.

Risk assessment of exposure to radon decay products

Energy Technology Data Exchange (ETDEWEB)

Monchaux, G

1999-07-01

The aim of this project was to assess the risk due to inhalation of radon and its decay products using an horizontal approach across a large scale research programme. The central objective was the assessment of human risk which requires combination of several topics involving a multidisciplinary approach. In the Aerosol Studies Group, progress was achieved in improvement, calibration and automation of experimental techniques for continuous and integrated measurements of the unattached fraction f{sub p}- and equilibrium factor F- values. Measurements were performed to determine the variation of size distributions of unattached and aerosol-associated radon decay products under typical living conditions. All aerosol groups performed controlled chamber studies to understand the basic behaviour of airborne activity concentrations. Measurements were performed to determine neutralisation rates of {sup 218}Po, to understand the cluster growth with residence time and to understand the hygroscopic growth of aerosol particles. In the Modelling Group, the programme RADEP has been developed to calculate the weighted committed equivalent lung dose per unit exposure of radon progeny (H{sub w}/P{sub p}) which implements the ICRP Publication 66 Human Respiratory Tract Model (HRTM). The stochastic deposition model (IDEAL) has been compared with the deposition model used by the HRTM, and the agreement between the two deposition models was excellent. A deterministic radon progeny dosimetry model (RADOS) has been developed. This model includes all bronchial airway generations compared with the HRTM that groups the 16 airway generations into three regions. Initial calculations with RADOS show that the basal and secretory cell doses are slightly smaller compared with that of the HRTM. A sensitivity analysis has been performed that has identified those HRTM model parameters that most affect the Hw/Pp. A stochastic rat deposition model (RALMO) and a clearance model for the rat based on the

Risk assessment of exposure to radon decay products

International Nuclear Information System (INIS)

Monchaux, G.

1999-01-01

The aim of this project was to assess the risk due to inhalation of radon and its decay products using an horizontal approach across a large scale research programme. The central objective was the assessment of human risk which requires combination of several topics involving a multidisciplinary approach. In the Aerosol Studies Group, progress was achieved in improvement, calibration and automation of experimental techniques for continuous and integrated measurements of the unattached fraction f p - and equilibrium factor F- values. Measurements were performed to determine the variation of size distributions of unattached and aerosol-associated radon decay products under typical living conditions. All aerosol groups performed controlled chamber studies to understand the basic behaviour of airborne activity concentrations. Measurements were performed to determine neutralisation rates of 218 Po, to understand the cluster growth with residence time and to understand the hygroscopic growth of aerosol particles. In the Modelling Group, the programme RADEP has been developed to calculate the weighted committed equivalent lung dose per unit exposure of radon progeny (H w /P p ) which implements the ICRP Publication 66 Human Respiratory Tract Model (HRTM). The stochastic deposition model (IDEAL) has been compared with the deposition model used by the HRTM, and the agreement between the two deposition models was excellent. A deterministic radon progeny dosimetry model (RADOS) has been developed. This model includes all bronchial airway generations compared with the HRTM that groups the 16 airway generations into three regions. Initial calculations with RADOS show that the basal and secretory cell doses are slightly smaller compared with that of the HRTM. A sensitivity analysis has been performed that has identified those HRTM model parameters that most affect the Hw/Pp. A stochastic rat deposition model (RALMO) and a clearance model for the rat based on the HRTM have been

Assessment of indirect human exposure to environmental sources of nickel: oral exposure and risk characterization for systemic effects.

Science.gov (United States)

De Brouwere, Katleen; Buekers, Jurgen; Cornelis, Christa; Schlekat, Christian E; Oller, Adriana R

2012-03-01

This paper describes the indirect human exposure to Ni via the oral route for the regional scale in the EU, together with a method to assess additional local exposure from industrial emissions. The approach fills a gap in the generic REACH guidance which is inadequate for assessing indirect environmental exposure of metals. Estimates of regional scale Ni dietary intake were derived from Ni dietary studies performed in the EU. Typical and Reasonable Worst Case dietary Ni intakes for the general population in the EU were below the oral Derived No Effect Level (DNEL) of Ni sulfate for systemic effects. Estimates for the Ni dietary intake at the local scale take into account the influence of aerial Ni deposition and transfer from soil to crops grown near industrial plants emitting Ni. The additional dietary exposure via this local contribution was small. Despite the use of conservative parameters for these processes, this method may underestimate dietary exposure around older industrial sites because REACH guidance does not account for historical soil contamination. Nevertheless, the method developed here can also be used as a screening tool for community-based risk assessment, as it accounts for historical soil pollution. Nickel exposure via drinking water was derived from databases on Ni tap water quality. A small proportion of the EU population (<5%) is likely to be exposed to tap water exceeding the EU standard (20 μg Ni/l). Taking into account the relative gastrointestinal absorption of Ni from water (30%) versus from solid matrices (5%), water intake constitutes, after dietary intake, the second most important pathway for oral Ni intake. Incidental ingestion of Ni from soil/dust at the regional scale, and also at the local scale, was low in comparison with dietary intake. Copyright © 2011 Elsevier B.V. All rights reserved.

Probabilistic disaggregation of a spatial portfolio of exposure for natural hazard risk assessment

DEFF Research Database (Denmark)

Custer, Rocco; Nishijima, Kazuyoshi

2018-01-01

In natural hazard risk assessment situations are encountered where information on the portfolio of exposure is only available in a spatially aggregated form, hindering a precise risk assessment. Recourse might be found in the spatial disaggregation of the portfolio of exposure to the resolution...... of a portfolio of buildings in two communes in Switzerland and the results are compared to sample observations. The relevance of probabilistic disaggregation uncertainty in natural hazard risk assessment is illustrated with the example of a simple flood risk assessment....

Exposure assessment and other challenges in non-ionizing radiation studies of childhood leukaemia

International Nuclear Information System (INIS)

Kheifets, L.; Oksuzyan, S.

2008-01-01

Studies of electromagnetic fields (EMF) and the development of childhood leukaemia face unique difficulties. EMF are imperceptible, ubiquitous, have multiple sources, and can vary greatly over time and distances. Childhood leukaemia and high average exposures to magnetic fields are both quite rare. Thus, a major challenge in EMF epidemiology is the small number of highly exposed cases and the necessity for retrospective assessment of exposure. Only studies designed to minimize bias while maximizing our ability to detect an association, should one exist, would have a potential to contribute to our understanding. New approaches are needed; the most promising in the extremely low-frequency range involves a study of a highly exposed cohort of children who have lived in apartments next to built-in transformers or electrical equipment rooms. Another promising avenue is an investigation of possible joint effects of environmental exposures and genetic co-factors. An exposure assessment methodology for residential radiofrequency fields is still in its infancy. Rapid changes in technology and exponential increases in its use make exposure assessment more difficult and urgent. (authors)

Exposure data and risk indicators for safety performance assessment in Europe.

Science.gov (United States)

Papadimitriou, Eleonora; Yannis, George; Bijleveld, Frits; Cardoso, João L

2013-11-01

The objective of this paper is the analysis of the state-of-the-art in risk indicators and exposure data for safety performance assessment in Europe, in terms of data availability, collection methodologies and use. More specifically, the concepts of exposure and risk are explored, as well as the theoretical properties of various exposure measures used in road safety research (e.g. vehicle- and person-kilometres of travel, vehicle fleet, road length, driver population, time spent in traffic, etc.). Moreover, the existing methods for collecting disaggregate exposure data for risk estimates at national level are presented and assessed, including survey methods (e.g. travel surveys, traffic counts) and databases (e.g. national registers). A detailed analysis of the availability and quality of existing risk exposure data is also carried out. More specifically, the results of a questionnaire survey in the European countries are presented, with detailed information on exposure measures available, their possible disaggregations (i.e. variables and values), their conformity to standard definitions and the characteristics of their national collection methods. Finally, the potential of international risk comparisons is investigated, mainly through the International Data Files with exposure data (e.g. Eurostat, IRTAD, ECMT, UNECE, IRF, etc.). The results of this review confirm that comparing risk rates at international level may be a complex task, as the availability and quality of exposure estimates in European countries varies significantly. The lack of a common framework for the collection and exploitation of exposure data limits significantly the comparability of the national data. On the other hand, the International Data Files containing exposure data provide useful statistics and estimates in a systematic way and are currently the only sources allowing international comparisons of road safety performance under certain conditions. Copyright © 2013 Elsevier Ltd. All

Assessing radiological impacts (exposures and doses) associated with the mining and milling of radioactive ores

International Nuclear Information System (INIS)

Williams, G.A.

1990-01-01

The basic units and concepts applicable to radiological assessment are presented. Data relevant to the assessment of radiological exposures from the mining and milling phases of uranium and thorium ores are discussed. As a guide to the assessment of environmental exposures to members of the public, concepts such as the critical group are defined. Environmental transport and exposure pathways are presented in general terms, together with a discussion of the use of mathematical models. The dose assessment procedures defined in the 1987 Code of Practice are described. 13 refs., 2 tabs., 1 fig

HESI pilot project: Testing a qualitative approach for incorporating exposure into alternatives assessment

DEFF Research Database (Denmark)

Greggs, Bill; Arnold, Scott; Burns, Thomas J.

-quantitative exposure assessment on the alternatives being considered. This talk will demonstrate an approach for including chemical and product exposure information in a qualitative AA comparison. Starting from existing hazard AAs, a series of four exposure examples were examined to test the concept, to understand...

Transport of Aquatic Contaminant and Assessment of Radioecological Exposure with Spatial and Temporal Effects

Science.gov (United States)

Feng, Ying

1995-01-01

A comprehensive study of the radioecological exposure assessment for a contaminated aquatic ecosystem has been performed in this dissertation. The primary objectives of this research were to advance the understanding of radiation exposure in nature and to increase current capabilities for estimating aquatic radiation exposure with the consideration of spatial and temporal effect in nature. This was accomplished through the development of a two-dimensional aquatic exposure assessment framework and by applying the framework to the contaminated Chernobyl cooling lake (pond). This framework integrated spatial and temporal heterogeneity effects of contaminant concentration, abundance and distribution of ecosystem populations, spatial- and temporal-dependent (or density-dependent) radionuclide ingestion, and alternative food web structures. The exposure model was built on the population level to allow for the integration of density dependent population regulation into the exposure assessment. Plankton population dynamics have been integrated into the hydrodynamic-transport model to determine plankton biomass density changes and distributions. The distribution of contaminant in water was also calculated using a hydrodynamic-transport model. The significance of adding spatial and temporal effects, spatial and temporal related ecological functions, and hydrodynamics in the exposure assessment was illustrated through a series of case studies. The results suggested that the spatial and temporal heterogeneity effects of radioactive environments were substantial. Among the ecological functions considered, the food web structure was the most important contributor to the variations of fish exposure. The results obtained using a multiple prey food web structure differed by a factor of 20 from the equilibrium concentration, and by a factor of 2.5 from the concentration obtained using a single-prey food web. Impacts of changes in abundance and distribution of biomass on contaminant

Assessment of dermal exposure to bitumen condensate among road paving and mastic crews with an observational method

NARCIS (Netherlands)

Agostini, M.; Fransman, W.; Vocht, F.D.; Joode, B.V.W.D.; Kromhout, H.

2011-01-01

Objective: To assess dermal exposure to bitumen condensate among road pavers and indoor mastic workers in multiple crews using a semi-quantitative observational method [DeRmal Exposure Assessment Method (DREAM)].Methods: Two skilled observers assessed dermal exposure to bitumen condensate among 85

Korean Ministry of Environment's web-based visual consumer product exposure and risk assessment system (COPER).

Science.gov (United States)

Lee, Hunjoo; Lee, Kiyoung; Park, Ji Young; Min, Sung-Gi

2017-05-01

With support from the Korean Ministry of the Environment (ME), our interdisciplinary research staff developed the COnsumer Product Exposure and Risk assessment system (COPER). This system includes various databases and features that enable the calculation of exposure and determination of risk caused by consumer products use. COPER is divided into three tiers: the integrated database layer (IDL), the domain specific service layer (DSSL), and the exposure and risk assessment layer (ERAL). IDL is organized by the form of the raw data (mostly non-aggregated data) and includes four sub-databases: a toxicity profile, an inventory of Korean consumer products, the weight fractions of chemical substances in the consumer products determined by chemical analysis and national representative exposure factors. DSSL provides web-based information services corresponding to each database within IDL. Finally, ERAL enables risk assessors to perform various exposure and risk assessments, including exposure scenario design via either inhalation or dermal contact by using or organizing each database in an intuitive manner. This paper outlines the overall architecture of the system and highlights some of the unique features of COPER based on visual and dynamic rendering engine for exposure assessment model on web.

Integrating exposure into chemical alternatives assessment using a qualitative approach

DEFF Research Database (Denmark)

Greggs, Bill; Arnold, Scott; Burns, T. E.

2016-01-01

, other attributes beyond hazard are also important, including exposure, risk, life-cycle impacts, performance, cost, and social responsibility. Building on the 2014 recommendations by the U.S. National Academy of Sciences to improve AA decisions by including comparative exposure assessment, the HESI...... Sustainable Chemical Alternatives Technical Committee, which consists of scientists from academia, industry, government, and NGOs, has developed a qualitative comparative exposure approach. Conducting such a comparison can screen for alternatives that are expected to have a higher human or environmental...... not necessarily reflect the views or policies of the U.S. Environmental Protection Agency....

Using cell phone location to assess misclassification errors in air pollution exposure estimation.

Science.gov (United States)

Yu, Haofei; Russell, Armistead; Mulholland, James; Huang, Zhijiong

2018-02-01

Air pollution epidemiologic and health impact studies often rely on home addresses to estimate individual subject's pollution exposure. In this study, we used detailed cell phone location data, the call detail record (CDR), to account for the impact of spatiotemporal subject mobility on estimates of ambient air pollutant exposure. This approach was applied on a sample with 9886 unique simcard IDs in Shenzhen, China, on one mid-week day in October 2013. Hourly ambient concentrations of six chosen pollutants were simulated by the Community Multi-scale Air Quality model fused with observational data, and matched with detailed location data for these IDs. The results were compared with exposure estimates using home addresses to assess potential exposure misclassification errors. We found the misclassifications errors are likely to be substantial when home location alone is applied. The CDR based approach indicates that the home based approach tends to over-estimate exposures for subjects with higher exposure levels and under-estimate exposures for those with lower exposure levels. Our results show that the cell phone location based approach can be used to assess exposure misclassification error and has the potential for improving exposure estimates in air pollution epidemiology studies. Copyright © 2017 Elsevier Ltd. All rights reserved.

Skin sensitization quantitative risk assessment for occupational exposure of hairdressers to hair dye ingredients.

Science.gov (United States)

Goebel, Carsten; Diepgen, Thomas L; Blömeke, Brunhilde; Gaspari, Anthony A; Schnuch, Axel; Fuchs, Anne; Schlotmann, Kordula; Krasteva, Maya; Kimber, Ian

2018-06-01

Occupational exposure of hairdressers to hair dyes has been associated with the development of allergic contact dermatitis (ACD) involving the hands. p-Phenylenediamine (PPD) and toluene-2,5-diamine (PTD) have been implicated as important occupational contact allergens. To conduct a quantitative risk assessment for the induction of contact sensitization to hair dyes in hairdressers, available data from hand rinsing studies following typical occupational exposure conditions to PPD, PTD and resorcinol were assessed. By accounting for wet work, uneven exposure and inter-individual variability for professionals, daily hand exposure concentrations were derived. Secondly, daily hand exposure was compared with the sensitization induction potency of the individual hair dye defined as the No Expected Sensitization Induction Levels (NESIL). For PPD and PTD hairdresser hand exposure levels were 2.7 and 5.9 fold below the individual NESIL. In contrast, hand exposure to resorcinol was 50 fold below the NESIL. Correspondingly, the risk assessment for PPD and PTD indicates that contact sensitization may occur, when skin protection and skin care are not rigorously applied. We conclude that awareness of health risks associated with occupational exposure to hair dyes, and of the importance of adequate protective measures, should be emphasized more fully during hairdresser education and training. Copyright © 2018 Elsevier Inc. All rights reserved.

The impact assessment of anticancer drug imatinib on the feeding behavior of rotifers with an integrated perspective: Exposure, post-exposure and re-exposure.

Science.gov (United States)

Yan, Zhengyu; Yan, Kun; He, Xingliang; Liu, Yanhua; Zhang, Jie; Lopez Torres, Oscar; Guo, Ruixin; Chen, Jianqiu

2017-10-01

The anticancer drugs are getting increasing attention as an emerging contaminant in the aquatic environments. In the present study, feeding behavior of the rotifer Brachionus calyciflorus under the impact of anticancer drug imatinib was evaluated. Traditional toxicological studies usually focus on dose-effect relationship at a given exposure time, while ignore the possible impact after the exposure. Thus, how the impact varied in the post-exposure and re-exposure was also considered in the present study. The feeding depression of the rotifers was attributed to the increased concentration of imatinib. Although the filtration and ingestion rate of the rotifers recovered to a certain extent after the exposure, the significant feeding inhibition still persisted even if the exposure was ended. In the re-exposure period, the feeding behavior was less depressed than those of the exposure period, which implied that rotifers might develop a tolerance to the same toxics. The activities of acetylcholine esterase (AchE) and the levels of reactive oxygen species (ROS) in rotifers were also detected. Imatinib inhibited the activities of AchE in the exposure and re-exposure while ROS levels increased significantly in the re-exposure period. Our present study provided an integrated assessment the potential environmental risks of imatinib at a new perspective. Copyright © 2017 Elsevier Ltd. All rights reserved.

Pesticide Exposure, Safety Issues, and Risk Assessment Indicators

Directory of Open Access Journals (Sweden)

Christos A. Damalas

2011-05-01

Full Text Available Pesticides are widely used in agricultural production to prevent or control pests, diseases, weeds, and other plant pathogens in an effort to reduce or eliminate yield losses and maintain high product quality. Although pesticides are developed through very strict regulation processes to function with reasonable certainty and minimal impact on human health and the environment, serious concerns have been raised about health risks resulting from occupational exposure and from residues in food and drinking water. Occupational exposure to pesticides often occurs in the case of agricultural workers in open fields and greenhouses, workers in the pesticide industry, and exterminators of house pests. Exposure of the general population to pesticides occurs primarily through eating food and drinking water contaminated with pesticide residues, whereas substantial exposure can also occur in or around the home. Regarding the adverse effects on the environment (water, soil and air contamination from leaching, runoff, and spray drift, as well as the detrimental effects on wildlife, fish, plants, and other non-target organisms, many of these effects depend on the toxicity of the pesticide, the measures taken during its application, the dosage applied, the adsorption on soil colloids, the weather conditions prevailing after application, and how long the pesticide persists in the environment. Therefore, the risk assessment of the impact of pesticides either on human health or on the environment is not an easy and particularly accurate process because of differences in the periods and levels of exposure, the types of pesticides used (regarding toxicity and persistence, and the environmental characteristics of the areas where pesticides are usually applied. Also, the number of the criteria used and the method of their implementation to assess the adverse effects of pesticides on human health could affect risk assessment and would possibly affect the characterization

Pesticide Exposure, Safety Issues, and Risk Assessment Indicators

Science.gov (United States)

Damalas, Christos A.; Eleftherohorinos, Ilias G.

2011-01-01

Pesticides are widely used in agricultural production to prevent or control pests, diseases, weeds, and other plant pathogens in an effort to reduce or eliminate yield losses and maintain high product quality. Although pesticides are developed through very strict regulation processes to function with reasonable certainty and minimal impact on human health and the environment, serious concerns have been raised about health risks resulting from occupational exposure and from residues in food and drinking water. Occupational exposure to pesticides often occurs in the case of agricultural workers in open fields and greenhouses, workers in the pesticide industry, and exterminators of house pests. Exposure of the general population to pesticides occurs primarily through eating food and drinking water contaminated with pesticide residues, whereas substantial exposure can also occur in or around the home. Regarding the adverse effects on the environment (water, soil and air contamination from leaching, runoff, and spray drift, as well as the detrimental effects on wildlife, fish, plants, and other non-target organisms), many of these effects depend on the toxicity of the pesticide, the measures taken during its application, the dosage applied, the adsorption on soil colloids, the weather conditions prevailing after application, and how long the pesticide persists in the environment. Therefore, the risk assessment of the impact of pesticides either on human health or on the environment is not an easy and particularly accurate process because of differences in the periods and levels of exposure, the types of pesticides used (regarding toxicity and persistence), and the environmental characteristics of the areas where pesticides are usually applied. Also, the number of the criteria used and the method of their implementation to assess the adverse effects of pesticides on human health could affect risk assessment and would possibly affect the characterization of the already

A flexible matrix-based human exposure assessment framework suitable for LCA and CAA

DEFF Research Database (Denmark)

Jolliet, Olivier; Ernstoff, Alexi; Huang, Lei

2016-01-01

are not applicable to all types of near-field chemical releases from consumer products, e.g. direct dermal application. A consistent near-and far-field framework is needed for life cycle assessment (LCA) and chemical alternative assessment (CAA) to inform mitigation of human exposure to harmful chemicals. To close......Humans can be exposed to chemicals via near-field exposure pathways (e.g. through consumer product use) and far-field exposure pathways (e.g. through environmental emissions along product life cycles). Pathways are often complex where chemicals can transfer directly from products to humans during...... use or exchange between near-and far-field compartments until sub -fractions reach humans via inhalation, ingestion or dermal uptake. Currently, however, multimedia exposure models mainly focus on far-field exposure pathways. Metrics and modeling approaches used in far-field, emission-based models...

Exposure Estimation for Risk Assessment of the Phthalate Incident in Taiwan.

Directory of Open Access Journals (Sweden)

Chu-Chih Chen

Full Text Available In May 2011, di(2-ethylhexyl phthalates (DEHP and, to a lesser extent, di-iso-nonyl phthalate (DiNP were found to have been illegally used for many years in Taiwan as clouding agents in foods including sports drinks, juice beverages, tea drinks, fruit jam/nectar/jelly, and health or nutrient supplements.To estimate the DEHP exposure for the study participants for the follow-up epidemiological study and health risk assessment.A total of 347 individuals possibly highly exposed to phthalate-tainted foods participated in the study. Exposure assessment was performed based on the participants' responses to a structured questionnaire, self-report of exposure history, urinary metabolite concentrations, and DEHP concentration information in 2449 food records. A Bayesian statistical approach using Markov chain Monte Carlo simulation was employed to deal with the uncertainties in the DEHP concentrations of the contaminated foods and the participants' likelihood of being exposed.An estimated 37% and 15% of children younger than 12 years old were exposed to DEHP at medium (20-50 μg / kg_bw / day and high AvDIs (50-100 μg / kg_bw / day, respectively, prior to the episode (9% and 3% in adults, respectively. Moreover, 11% of children and 1% of adults were highly exposed (> 100 μg / kg_bw / day, with a maximum of 414.1 μg / kg_bw / day and 126.4 μg / kg_bw / day, respectively.The phthalate exposure-associated adverse health effects for these participants warrant further investigation. The estimation procedure may be applied to other exposure assessment with various sources of uncertainties.

Titanium dioxide nanoparticles: occupational exposure assessment in the photocatalytic paving production

International Nuclear Information System (INIS)

Spinazzè, Andrea; Cattaneo, Andrea; Limonta, Marina; Bollati, Valentina; Bertazzi, Pier Alberto; Cavallo, Domenico M.

2016-01-01

Limited data are available regarding occupational exposure assessment to nano-sized titanium dioxide (nano-TiO_2). The objective of this study is to assess the occupational exposure of workers engaged in the application of nano-TiO_2 onto concrete building materials, by means of a multi-metric approach (mean diameter, number, mass and surface area concentrations). The measurement design consists of the combined use of (i) direct-reading instruments to evaluate the total particle number concentrations relative to the background concentration and the mean size-dependent characteristics of particles (mean diameter and surface area concentration) and to estimate the 8-h time-weighted average (8-h TWA) exposure to nano-TiO_2 for workers involved in different working tasks; and (ii) filter-based air sampling, used for the determination of size-resolved particle mass concentrations. A further estimation was performed to obtain the mean 8-h TWA exposure values expressed as mass concentrations (µg nano-TiO_2/m"3). The multi-metric characterization of occupational exposure to nano-TiO_2 was significantly different both for different work environments and for each work task. Generally, workers were exposed to engineered nanoparticles (ENPs; <100 nm) mean levels lower than the recommended reference values and proposed occupational exposure limits (40,000 particle/cm"3; 300 µg/m"3) and relevant exposures to peak concentration were not likely to be expected. The estimated 8-h TWA exposure showed differences between the unexposed and exposed subjects. For these last, further differences were defined between operators involved in different work tasks. This study provides information on nano-TiO_2 number and mass concentration, size distribution, particles diameter and surface area concentrations, which were used to obtain work shift-averaged exposures.

Titanium dioxide nanoparticles: occupational exposure assessment in the photocatalytic paving production

Energy Technology Data Exchange (ETDEWEB)

Spinazzè, Andrea, E-mail: andrea.spinazze@uninsubria.it; Cattaneo, Andrea; Limonta, Marina [Università degli studi dell’Insubria, Dipartimento di Scienza e Alta Tecnologia (Italy); Bollati, Valentina; Bertazzi, Pier Alberto [Università degli Studi di Milano, EPIGET-Epidemiology, Epigenetics and Toxicology Lab, Dipartimento di Scienze Cliniche e di Comunità (Italy); Cavallo, Domenico M. [Università degli studi dell’Insubria, Dipartimento di Scienza e Alta Tecnologia (Italy)

2016-06-15

Limited data are available regarding occupational exposure assessment to nano-sized titanium dioxide (nano-TiO{sub 2}). The objective of this study is to assess the occupational exposure of workers engaged in the application of nano-TiO{sub 2} onto concrete building materials, by means of a multi-metric approach (mean diameter, number, mass and surface area concentrations). The measurement design consists of the combined use of (i) direct-reading instruments to evaluate the total particle number concentrations relative to the background concentration and the mean size-dependent characteristics of particles (mean diameter and surface area concentration) and to estimate the 8-h time-weighted average (8-h TWA) exposure to nano-TiO{sub 2} for workers involved in different working tasks; and (ii) filter-based air sampling, used for the determination of size-resolved particle mass concentrations. A further estimation was performed to obtain the mean 8-h TWA exposure values expressed as mass concentrations (µg nano-TiO{sub 2}/m{sup 3}). The multi-metric characterization of occupational exposure to nano-TiO{sub 2} was significantly different both for different work environments and for each work task. Generally, workers were exposed to engineered nanoparticles (ENPs; <100 nm) mean levels lower than the recommended reference values and proposed occupational exposure limits (40,000 particle/cm{sup 3}; 300 µg/m{sup 3}) and relevant exposures to peak concentration were not likely to be expected. The estimated 8-h TWA exposure showed differences between the unexposed and exposed subjects. For these last, further differences were defined between operators involved in different work tasks. This study provides information on nano-TiO{sub 2} number and mass concentration, size distribution, particles diameter and surface area concentrations, which were used to obtain work shift-averaged exposures.

Tumulus Disposal Demonstration Project assessment plan for potential worker exposure: Revision 1

International Nuclear Information System (INIS)

Styers, D.R.

1989-03-01

The purpose of the ''Assessment Plan for Potential Worker Exposure'' is to determine the potential radiological exposures to the workers as they dispose of low-level radioactive wastes (LLW) on the Tumulus Disposal Demonstration Project (TDDP). An evaluation of the work procedures and precautions will be made so as to maintain the exposure levels As Low As Reasonably Achievable (ALARA). 10 refs., 10 figs

Assessment and management of chemical exposure in the Mohs laboratory.

Science.gov (United States)

Gunson, Todd H; Smith, Harvey R; Vinciullo, Carl

2011-01-01

The correct handling, storage, and disposal of chemicals used in the processing of tissue for Mohs micrographic surgery are essential. To identify the chemicals involved in the preparation of Mohs frozen sections and assess the associated occupational health risks. To quantify exposure levels of hazardous chemicals and ensure that they are minimized. A risk assessment form was completed for each chemical. Atmospheric sampling was performed at our previous laboratory for formaldehyde and volatile organic compounds. These data were used in the design of our new facility, where testing was repeated. Twenty-five chemicals were identified. Ten were classified as hazardous substances, 10 were flammable, six had specific disposal requirements, four were potential carcinogens, and three were potential teratogens. Formaldehyde readings at our previous laboratory were up to eight times the national exposure standard. Testing at the new laboratory produced levels well below the exposure standards. Chemical exposure within the Mohs laboratory can present a significant occupational hazard. Acutely toxic and potentially carcinogenic formaldehyde was found at high levels in a relatively standard laboratory configuration. A laboratory can be designed with a combination of physical environment and operational protocols that minimizes hazards and creates a safe working environment. © 2010 by the American Society for Dermatologic Surgery, Inc.

Reliability of a semi-quantitative method for dermal exposure assessment (DREAM)

NARCIS (Netherlands)

Wendel de Joode, B. van; Hemmen, J.J. van; Meijster, T.; Major, V.; London, L.; Kromhout, H.

2005-01-01

Valid and reliable semi-quantitative dermal exposure assessment methods for epidemiological research and for occupational hygiene practice, applicable for different chemical agents, are practically nonexistent. The aim of this study was to assess the reliability of a recently developed

Health and household air pollution from solid fuel use: the need for improved exposure assessment.

Science.gov (United States)

Clark, Maggie L; Peel, Jennifer L; Balakrishnan, Kalpana; Breysse, Patrick N; Chillrud, Steven N; Naeher, Luke P; Rodes, Charles E; Vette, Alan F; Balbus, John M

2013-10-01

Nearly 3 billion people worldwide rely on solid fuel combustion to meet basic household energy needs. The resulting exposure to air pollution causes an estimated 4.5% of the global burden of disease. Large variability and a lack of resources for research and development have resulted in highly uncertain exposure estimates. We sought to identify research priorities for exposure assessment that will more accurately and precisely define exposure-response relationships of household air pollution necessary to inform future cleaner-burning cookstove dissemination programs. As part of an international workshop in May 2011, an expert group characterized the state of the science and developed recommendations for exposure assessment of household air pollution. The following priority research areas were identified to explain variability and reduce uncertainty of household air pollution exposure measurements: improved characterization of spatial and temporal variability for studies examining both short- and long-term health effects; development and validation of measurement technology and approaches to conduct complex exposure assessments in resource-limited settings with a large range of pollutant concentrations; and development and validation of biomarkers for estimating dose. Addressing these priority research areas, which will inherently require an increased allocation of resources for cookstove research, will lead to better characterization of exposure-response relationships. Although the type and extent of exposure assessment will necessarily depend on the goal and design of the cookstove study, without improved understanding of exposure-response relationships, the level of air pollution reduction necessary to meet the health targets of cookstove interventions will remain uncertain.

A quantitative screening-level approach to incorporate chemical exposure and risk into alternative assessment evaluations.

Science.gov (United States)

Arnold, Scott M; Greggs, Bill; Goyak, Katy O; Landenberger, Bryce D; Mason, Ann M; Howard, Brett; Zaleski, Rosemary T

2017-11-01

As the general public and retailers ask for disclosure of chemical ingredients in the marketplace, a number of hazard screening tools were developed to evaluate the so-called "greenness" of individual chemical ingredients and/or formulations. The majority of these tools focus only on hazard, often using chemical lists, ignoring the other part of the risk equation: exposure. Using a hazard-only focus can result in regrettable substitutions, changing 1 chemical ingredient for another that turns out to be more hazardous or shifts the toxicity burden to others. To minimize the incidents of regrettable substitutions, BizNGO describes "Common Principles" to frame a process for informed substitution. Two of these 6 principles are: "reduce hazard" and "minimize exposure." A number of frameworks have emerged to evaluate and assess alternatives. One framework developed by leading experts under the auspices of the US National Academy of Sciences recommended that hazard and exposure be specifically addressed in the same step when assessing candidate alternatives. For the alternative assessment community, this article serves as an informational resource for considering exposure in an alternatives assessment using elements of problem formulation; product identity, use, and composition; hazard analysis; exposure analysis; and risk characterization. These conceptual elements build on practices from government, academia, and industry and are exemplified through 2 hypothetical case studies demonstrating the questions asked and decisions faced in new product development. These 2 case studies-inhalation exposure to a generic paint product and environmental exposure to a shampoo rinsed down the drain-demonstrate the criteria, considerations, and methods required to combine exposure models addressing human health and environmental impacts to provide a screening level hazard and exposure (risk) analysis. This article informs practices for these elements within a comparative risk context

Comparison of occupational exposure assessment tools and concepts for nanomaterials

DEFF Research Database (Denmark)

Liguori, Biase; Hansen, Steffen Foss; Baun, Anders

The development, production and application of engineered nanomaterials have been growing in different fields. This leads to a consequent increased potential of exposure to nanomaterials in the working environment. However to determine the potential exposure risk is a challenging task for risk...... for Nanomaterials”; “NanoSafer vs. 1.1 – A web-based precautionary risk assessment tool for manufactured nanomaterials using first order modeling” Based on the literature information we have analyzed these tools and discussed elements regarding: the domain of application and whether it accounts for the nanospecific...... factor or nano-relevance; the work exposure scenario, for which types of processes they may be used; are the tools using the source-transmission-receptor approach; the input data requirements; whether the tools included qualitative or semi-quantitative or quantitative evaluations of the exposure; whether...

Probabilistic exposure assessment in environmental medicine and customer protection. Part 1. Probabilistic exposure assessment for assessing the health effects of environmental pollution; Probabilistische Expositionsabschaetzung in Umweltmedizin und Verbraucherschutz. T. 1. Probabilistische Expositionsabschaetzung zur Beurteilung der gesundheitlichen Auswirkungen von Umweltbelastungen

Energy Technology Data Exchange (ETDEWEB)

Wintermeyer, D. [Umweltbundesamt, Berlin (Germany). Inst. fuer Wasser-, Boden- und Lufthygiene

1999-07-01

In the risk assessment of possible health effects caused by environmental pollutants, it is significant to accurately estimate the pollutant exposure of the affected population. In quantitative exposure assessments there are basically two different approaches: The traditional method of deterministic exposure assessment combines measured data of the different exposure factors (e.g. pollutant concentration in ambient air, in the soil, etc.) mathematically with individual parameters (such as pollutant uptake rate, body weight, etc.). In order to characterize pollutant exposure and the health risks to be derived the 95{sup th} percentiles of all exposure factors, if available, are usually used in the pollutant exposure calculation. This so-called single-point approach for a worst case estimate tends to overestimate the pollutant exposure and sometimes leads to unrealistically high health risk estimates. In contrast, the probabilistic approach uses statistical distributions of all exposure factors, if available, combining them mathematically. In a Monte Carlo simulation, random samples are repeatedly drawn from all distributions of the exposure factors and combined with each other in order to calculate exposure. By repeating this procedure frequently, the simulation results finally converge to the exposure distribution. Especially in the peripheral parts of these distributions, which are particularly relevant in exposure assessment, frequently only a small amount of measured data is available. This causes inaccuracies since the probabilistic approach in exposure assessment substantially depends on the quality, quantity, and representativeness of the underlying data on which the distributions of the exposure factors are based. However, in all cases with a sufficient database, the probabilistic approach is obviously superior to the single point approach and should therefore be applied more often in the environmental risk assessment for the future. (orig.) [German] Fuer

Measurement procedure to assess exposure to extremely low-frequency fields: A primary school case study

International Nuclear Information System (INIS)

Alonso, A.; Bahillo, A.; De la Rosa, R.; Carrera, A.; Duran, R. J.; Fernandez, P.

2012-01-01

How to correctly measure the exposure of general public to extremely low-frequency (ELF) radiation is a key issue for ELF epidemiological studies. This paper proposes a measurement procedure to accurately assess the exposure of people to electric and magnetic field in the frequency band from 5 Hz to 100 kHz in buildings and their premises. As ELF radiation could be particularly harmful to children, the measurement procedure is focused on exposure to ELF in schools. Thus, the students' exposure to ELF fields can be assessed by correlating the ELF measurements to the hours of school activity. In this paper, the measurement protocol was applied to study the ELF exposure on students from Garcia Quintana primary school in Valladolid, Spain. The campaign of measurements for ELF exposure assessment in this primary school was of great interest for the Regional Council of Public Health because of the social alarm generated by the presence of a significant number cancer cases in children. (authors)

Environmental radiation exposure: Regulation, monitoring, and assessment

International Nuclear Information System (INIS)

Chen, S.Y.; Yu, C.; Hong, K.J.

1991-01-01

Radioactive releases to the environment from nuclear facilities constitute a public health concern. Protecting the public from such releases can be achieved through the establishment and enforcement of regulatory standards. In the United States, numerous standards have been promulgated to regulate release control at nuclear facilities. Most recent standards are more restrictive than those in the past and require that radioactivity levels be as low as reasonably achievable (ALARA). Environmental monitoring programs and radiological dose assessment are means of ensuring compliance with regulations. Environmental monitoring programs provide empirical information on releases, such as the concentrations of released radioactivity in environmental media, while radiological dose assessment provides the analytical means of quantifying dose exposures for demonstrating compliance

Impact of refining the assessment of dietary exposure to cadmium in the European adult population.

Science.gov (United States)

Ferrari, Pietro; Arcella, Davide; Heraud, Fanny; Cappé, Stefano; Fabiansson, Stefan

2013-01-01

Exposure assessment constitutes an important step in any risk assessment of potentially harmful substances present in food. The European Food Safety Authority (EFSA) first assessed dietary exposure to cadmium in Europe using a deterministic framework, resulting in mean values of exposure in the range of health-based guidance values. Since then, the characterisation of foods has been refined to better match occurrence and consumption data, and a new strategy to handle left-censoring in occurrence data was devised. A probabilistic assessment was performed and compared with deterministic estimates, using occurrence values at the European level and consumption data from 14 national dietary surveys. Mean estimates in the probabilistic assessment ranged from 1.38 (95% CI = 1.35-1.44) to 2.08 (1.99-2.23) µg kg⁻¹ bodyweight (bw) week⁻¹ across the different surveys, which were less than 10% lower than deterministic (middle bound) mean values that ranged from 1.50 to 2.20 µg kg⁻¹ bw week⁻¹. Probabilistic 95th percentile estimates of dietary exposure ranged from 2.65 (2.57-2.72) to 4.99 (4.62-5.38) µg kg⁻¹ bw week⁻¹, which were, with the exception of one survey, between 3% and 17% higher than middle-bound deterministic estimates. Overall, the proportion of subjects exceeding the tolerable weekly intake of 2.5 µg kg⁻¹ bw ranged from 14.8% (13.6-16.0%) to 31.2% (29.7-32.5%) according to the probabilistic assessment. The results of this work indicate that mean values of dietary exposure to cadmium in the European population were of similar magnitude using determinist or probabilistic assessments. For higher exposure levels, probabilistic estimates were almost consistently larger than deterministic counterparts, thus reflecting the impact of using the full distribution of occurrence values to determine exposure levels. It is considered prudent to use probabilistic methodology should exposure estimates be close to or exceeding health-based guidance values.

Measuring socio-economic inequality: From dwellers' perspective within Bangalore urban agglomeration

Directory of Open Access Journals (Sweden)

Keya Chakraborty

2015-06-01

Full Text Available Planners and researchers have realized that larger regional framework of urban areas are significant in assessing various inequality aspects in a developing country like India. The framework consists of heterogeneity in spatial and demographic aspects and in quality of socio-economic development levels as well. Against this background, the present paper has proposed a methodological framework to assess socio-economic inequality within Bangalore Urban Agglomeration (BUA as governed by the composite set of Human Development Index (HDI based indicators. Assessments are based on local data of dwellers' preferences on the indicators. On the whole, this paper has tried to establish the significance of application of HDI based indicators in an assessment of socio-economic inequality within BUA. Consequently, the paper has arrived at the need for improvement of comprehensive HDI governed basic public services, amenities, and advanced facilities, across all trans-urban-area levels to ensure a holistic development within BUA.

Indicative and complementary effects of human biological indicators for heavy metal exposure assessment.

Science.gov (United States)

Xing, Ruiya; Li, Yonghua; Zhang, Biao; Li, Hairong; Liao, Xiaoyong

2017-10-01

Although human biological indicators have been widely utilized for biomonitoring environmental pollutants in health exposure assessment, the relationship between internal and external exposure has not yet been adequately established. In this study, we collected and analyzed 61 rice, 56 pepper, and 58 soil samples, together with 107 hair, 107 blood, and 107 urine samples from residents living in selected intensive mining areas in China. Concentrations of most of the four elements considered (Pb, Cd, Hg, and Se) exceeded national standards, implying high exposure risk in the study areas. Regression analysis also revealed a correlation (0.33, P human hair (as well as in human blood); to some extent, Pb content in hair and blood could therefore be used to characterize external Pb exposure. The correlation between Hg in rice and in human hair (up to 0.5, P human hair for Hg exposure. A significant correlation was also noted between concentrations of some elements in different human samples, for example, between Hg in hair and blood (0.641, P assessing heavy metal exposure.

Examining Exposure Assessment in Shift Work Research: A Study on Depression Among Nurses.

Science.gov (United States)

Hall, Amy L; Franche, Renée-Louise; Koehoorn, Mieke

2018-02-13

Coarse exposure assessment and assignment is a common issue facing epidemiological studies of shift work. Such measures ignore a number of exposure characteristics that may impact on health, increasing the likelihood of biased effect estimates and masked exposure-response relationships. To demonstrate the impacts of exposure assessment precision in shift work research, this study investigated relationships between work schedule and depression in a large survey of Canadian nurses. The Canadian 2005 National Survey of the Work and Health of Nurses provided the analytic sample (n = 11450). Relationships between work schedule and depression were assessed using logistic regression models with high, moderate, and low-precision exposure groupings. The high-precision grouping described shift timing and rotation frequency, the moderate-precision grouping described shift timing, and the low-precision grouping described the presence/absence of shift work. Final model estimates were adjusted for the potential confounding effects of demographic and work variables, and bootstrap weights were used to generate sampling variances that accounted for the survey sample design. The high-precision exposure grouping model showed the strongest relationships between work schedule and depression, with increased odds ratios [ORs] for rapidly rotating (OR = 1.51, 95% confidence interval [CI] = 0.91-2.51) and undefined rotating (OR = 1.67, 95% CI = 0.92-3.02) shift workers, and a decreased OR for depression in slow rotating (OR = 0.79, 95% CI = 0.57-1.08) shift workers. For the low- and moderate-precision exposure grouping models, weak relationships were observed for all work schedule categories (OR range 0.95 to 0.99). Findings from this study support the need to consider and collect the data required for precise and conceptually driven exposure assessment and assignment in future studies of shift work and health. Further research into the effects of shift rotation frequency on depression is

Road traffic air and noise pollution exposure assessment - A review of tools and techniques.

Science.gov (United States)

Khan, Jibran; Ketzel, Matthias; Kakosimos, Konstantinos; Sørensen, Mette; Jensen, Steen Solvang

2018-09-01

Road traffic induces air and noise pollution in urban environments having negative impacts on human health. Thus, estimating exposure to road traffic air and noise pollution (hereafter, air and noise pollution) is important in order to improve the understanding of human health outcomes in epidemiological studies. The aims of this review are (i) to summarize current practices of modelling and exposure assessment techniques for road traffic air and noise pollution (ii) to highlight the potential of existing tools and techniques for their combined exposure assessment for air and noise together with associated challenges, research gaps and priorities. The study reviews literature about air and noise pollution from urban road traffic, including other relevant characteristics such as the employed dispersion models, Geographic Information System (GIS)-based tool, spatial scale of exposure assessment, study location, sample size, type of traffic data and building geometry information. Deterministic modelling is the most frequently used assessment technique for both air and noise pollution of short-term and long-term exposure. We observed a larger variety among air pollution models as compared to the applied noise models. Correlations between air and noise pollution vary significantly (0.05-0.74) and are affected by several parameters such as traffic attributes, building attributes and meteorology etc. Buildings act as screens for the dispersion of pollution, but the reduction effect is much larger for noise than for air pollution. While, meteorology has a greater influence on air pollution levels as compared to noise, although also important for noise pollution. There is a significant potential for developing a standard tool to assess combined exposure of traffic related air and noise pollution to facilitate health related studies. GIS, due to its geographic nature, is well established and has a significant capability to simultaneously address both exposures. Copyright �

Assessing unregulated ionizing radiation exposures of U.S. populations from conventional industries

International Nuclear Information System (INIS)

Pennington, Charles W.

2006-01-01

During the latter twentieth century, the public learned to fear perceived threats from emerging technologies. Concern about ionizing radiation became a persistent fear, causing protracted and often pointless debate. The twenty-first century offers new opportunities for this fear to cause public and political upset. Citizens and politicians know little about 'normal' radiation exposures caused by conventional industries. This paper summarizes ionizing radiation exposure assessments of several such industries, showing they deliver multiples of background radiation annually to millions of people, with even higher subpopulation doses due to lognormally distributed exposures. Such information may be useful in educating the public and in supporting comparative assessments or other forms of research on potential sources of public radiation exposure in the twenty-first century. By exposing people to information about normal radiation, we may hope to avoid some unfortunate policies and unnecessary regulatory responses, while abating needless public fear during this technologically challenging century

Non-destructive pollution exposure assessment in the European hedgehog (Erinaceus europaeus): IV hair versus soil analysis in exposure and risk assessment of organochlorine compounds

NARCIS (Netherlands)

Havé, D' H.; Scheirs, J.; Covaci, A.; Brink, van den N.W.; Verhagen, R.; Coen, De W.

2007-01-01

Few ecotoxicological studies on mammals use non-destructive methodologies, despite the growing ethical concern over the use of destructive sampling methods. In the present study we assessed exposure of hedgehogs (Erinaceus europaeus) to polychlorinated biphenyls (PCBs),

Health and exposure assessment of flare gas emissions

International Nuclear Information System (INIS)

Kindzierski, W.B.; Byrne-Lewis, C.; Probert, S.

2000-01-01

The incomplete combustion of flare gases produces pollutants such as volatile organic compounds (VOCs) and polycyclic aromatic hydrocarbons (PAHs) which are cause for concern for public health. Some of the concerns relate to potential long-term cumulative health effects from exposure to hazardous air pollutants including benzene, styrene, naphthalene, and benzopyrene. This study demonstrated that several factors should be taken into account when considering the importance of flaring and human exposure to flare gas emissions. Most flare stacks are located in rural areas, but most time-availability studies have been done on urban populations where the majority of people spend their time indoors. It was recommended that more time-activity studies are needed to emphasize the behaviour of rural populations which are most susceptible to exposure from pollutants from flaring. It was concluded that higher indoor air concentrations exist for many VOCs and PAHs compared to outdoors, but in these instances, indoor sources are the major contributors to indoor air concentrations. It was recommended that health assessments of hazardous air pollutants emitted from gas flaring has to take into account the indoor setting and other background exposures in order to provide useful information for decision makers. 49 refs., 8 tabs., 1 fig

International experience in addressing combined exposures: Increasing the efficiency of assessment

International Nuclear Information System (INIS)

Meek, M.E.

2013-01-01

More efficient methodology for assessing the impact of combined exposures to multiple chemicals has been considered in a project of the World Health Organization (WHO) International Programme on Chemical Safety (IPCS). Recommendations regarding terminology and the status of development of the framework, its content, review and application are described. Evolving experience in its application is illustrated by example (polybrominated diphenyls) with special emphasis on the critical content of problem formulation, the role of predictive tools in grouping of chemicals for consideration and the importance of explicit delineation of relative uncertainty and sensitivity for tiered assessment. Priorities in increasing the efficiency of risk assessment not only for combined exposures, but more generally based on experience acquired in developing the framework and its application in case studies are identified and recommendations included

Task-based dermal exposure models for regulatory risk assessment

NARCIS (Netherlands)

Warren, N.D.; Marquart, H.; Christopher, Y.; Laitinen, J.; Hemmen, J.J. van

2006-01-01

The regulatory risk assessment of chemicals requires the estimation of occupational dermal exposure. Until recently, the models used were either based on limited data or were specific to a particular class of chemical or application. The EU project RISKOFDERM has gathered a considerable number of

EPa`s program for risk assessment guidelines: Exposure issues

Energy Technology Data Exchange (ETDEWEB)

Callahan, M.A. [Environmental Protection Agency, Washington, DC (United States)

1990-12-31

Three major issues to be dealt with over the next ten years in the exposure assessment field are: consistency in terminology, the impact of computer technology on the choice of data and modeling, and conceptual issues such as the use of time-weighted averages.

The Role of Arsenic Speciation in Dietary Exposure Assessment and the Need to Include Bioaccessibility and Biotransformation

Science.gov (United States)

Chemical form specific exposure assessment for arsenic has long been identified as a source of uncertainty in estimating the risk associated with the aggregate exposure for a population. Some speciation based assessments document occurrence within an exposure route; however, the...

Air pollution in moderately polluted urban areas: How does the definition of "neighborhood" impact exposure assessment?

Science.gov (United States)

Tenailleau, Quentin M; Mauny, Frédéric; Joly, Daniel; François, Stéphane; Bernard, Nadine

2015-11-01

Environmental health studies commonly quantify subjects' pollution exposure in their neighborhood. How this neighborhood is defined can vary, however, leading to different approaches to quantification whose impacts on exposure levels remain unclear. We explore the relationship between neighborhood definition and exposure assessment. NO2, benzene, PM10 and PM2.5 exposure estimates were computed in the vicinity of 10,825 buildings using twelve exposure assessment techniques reflecting different definitions of "neighborhood". At the city scale, its definition does not significantly influence exposure estimates. It does impact levels at the building scale, however: at least a quarter of the buildings' exposure estimates for a 400 m buffer differ from the estimated 50 m buffer value (±1.0 μg/m(3) for NO2, PM10 and PM2.5; and ±0.05 μg/m(3) for benzene). This variation is significantly related to the definition of neighborhood. It is vitally important for investigators to understand the impact of chosen assessment techniques on exposure estimates. Copyright © 2015 Elsevier Ltd. All rights reserved.

[The use of saliva for exposure assessments on designer drugs among adolescents].

Science.gov (United States)

Napierała, Marta; Tezyk, Artur; Piznal, Małgorzata; Bogusiewicz, Joanna; Florek, Ewa

2015-01-01

Drug use is one of the fundamental problems of the contemporary world. Due to the debilitating effects on physical and mental health and the possibility of impaired social functions, it is extremely important to assess exposure to psychoactive substances among high-risk groups. Taking into account characteristics of adolescence, one of them includes young people. To assess the exposure of young people to drugs, survey research is the most commonly use. To establish reliability of the information indicated by the students, toxicological studies could be a good manner. High-performance liquid chromatography coupled with mass spectrometry (LC-MS) is currently one of the most common techniques use for the detection and determination of psychoactive substances in biological material. In practice, an important issue in toxicological studies is the selection of a suitable biological material. Taking into account economic considerations and the method of sampling, the saliva is an increasingly used alternative material. The aim of this study was to assess the exposure of junior high school students on psychoactive substances--designer drugs, through the analysis of surveys and qualitative analysis of saliva taken from teenagers. It has been shown that surveys are a relatively quick and easy form of assessing the exposure of young people to psychoactive substances, but require verification through toxicological analysis of biological material for the presence of psychoactive substances for their reliability. Poznan secondary school students experimented with designer drugs at a similar level as respondents of nationwide survey from 2013.

Inter-individual variations of human mercury exposure biomarkers: a cross-sectional assessment

Directory of Open Access Journals (Sweden)

Einarsson Östen

2005-10-01

Full Text Available Abstract Background Biomarkers for mercury (Hg exposure have frequently been used to assess exposure and risk in various groups of the general population. We have evaluated the most frequently used biomarkers and the physiology on which they are based, to explore the inter-individual variations and their suitability for exposure assessment. Methods Concentrations of total Hg (THg, inorganic Hg (IHg and organic Hg (OHg, assumed to be methylmercury; MeHg were determined in whole blood, red blood cells, plasma, hair and urine from Swedish men and women. An automated multiple injection cold vapour atomic fluorescence spectrophotometry analytical system for Hg analysis was developed, which provided high sensitivity, accuracy, and precision. The distribution of the various mercury forms in the different biological media was explored. Results About 90% of the mercury found in the red blood cells was in the form of MeHg with small inter-individual variations, and part of the IHg found in the red blood cells could be attributed to demethylated MeHg. THg in plasma was associated with both IHg and MeHg, with large inter-individual variations in the distribution between red blood cells and plasma. THg in hair reflects MeHg exposure at all exposure levels, and not IHg exposure. The small fraction of IHg in hair is most probably emanating from demethylated MeHg. The inter-individual variation in the blood to hair ratio was very large. The variability seemed to decrease with increasing OHg in blood, most probably due to more frequent fish consumption and thereby blood concentrations approaching steady state. THg in urine reflected IHg exposure, also at very low IHg exposure levels. Conclusion The use of THg concentration in whole blood as a proxy for MeHg exposure will give rise to an overestimation of the MeHg exposure depending on the degree of IHg exposure, why speciation of mercury forms is needed. THg in RBC and hair are suitable proxies for MeHg exposure

How to assess exposure of aquatic organisms to manufactured nanoparticles?

DEFF Research Database (Denmark)

Quik, Joris T.K.; Vonk, Jan Arie; Hansen, Steffen Foss

2011-01-01

Ecological risk of chemicals is measured by the quotient of predicted no-effect concentrations and predicted exposure concentrations, which are hard to assess for manufactured nanomaterials (NMs). This paper proposes modifications to currently used models, in order to make them suitable for estim......Ecological risk of chemicals is measured by the quotient of predicted no-effect concentrations and predicted exposure concentrations, which are hard to assess for manufactured nanomaterials (NMs). This paper proposes modifications to currently used models, in order to make them suitable...... on sedimentation and dissolution of NMs in environmentally relevant systems. We deduce that the overall kinetics of water–sediment transport of NMs should be close to first order. The lack of data on dissolution of NMs under environmentally realistic conditions calls for a pragmatic decision on which rates...

[The methods of assessment of health risk from exposure to radon and radon daughters].

Science.gov (United States)

Demin, V F; Zhukovskiy, M V; Kiselev, S M

2014-01-01

The critical analysis of existing models of the relationship dose-effect (RDE) for radon exposure on human health has been performed. Conclusion about the necessity and possibility of improving these models has been made. A new improved version ofthe RDE has been developed. A technique for assessing the human health risk of exposure to radon, including the method for estimating of exposure doses of radon, an improved model of RDE, proper methodology risk assessment has been described. Methodology is proposed for the use in the territory of Russia.

Socio-cognitive exposure and risk assessment: The case of mobile phones

International Nuclear Information System (INIS)

Poumadere, M.; Perrin, A.

2011-01-01

Mobile telephone technology is characterized by spectacular global expansion. In a corollary manner, radio frequencies have become omnipresent in the public and private environment, as the physical basis for mobile communications, and as something that has entered the awareness of a vast number of persons. This dual nature of radio frequencies means that population concerns have been taken into account in the risk assessment process. Against this background, we first examine the principle of separation between assessment, evaluation and management of risk. We then consider several categories of exposure. The concept of socio-cognitive exposure is proposed, to address the possible effects of chronic exposure of populations to alarming information when various health effects of radio frequencies are discussed. This approach specifies the role of information as an intermediary between environment and health. Applied to the case of radio frequencies, such a conceptual approach could result in redefining such terms as vulnerable populations, extreme situations and protective measures. (authors)

Chemical and biochemical tools to assess pollution exposure in cultured fish

International Nuclear Information System (INIS)

Fernandes, Denise; Zanuy, Silvia; Bebianno, Maria Joao; Porte, Cinta

2008-01-01

There is little information regarding pollutant levels in farmed fish, and the risks associated to consumption. This study was designed to assess levels of exposure to metals, organochlorinated compounds, polycyclic aromatic hydrocarbons (PAHs) and alkylphenols (APEs) in farmed sea bass Dicentrarchus labrax from five aquacultures located in Southern Europe. Additionally, several biochemical responses (metallothionein, 7-ethoxyresorufin O-deethylase, vitellogenin) were determined as complementary tools. The obtained data indicate that pollutants exposure in farmed fish is similar to the levels reported in wild specimens from the area. Nonetheless, some biochemical responses were observed in the studied organisms, viz. metallothionein induction in Cu exposed organisms, and 7-ethoxyresorufin O-deethylase (EROD) and vitellogenin induction in PAHs and APEs exposed ones. The study further supports the usefulness of the biomarker approach as a first screening method to discriminate between basal and high levels of exposure in cultured fish. - Pollution assessment in cultured fish: chemical and biochemical tools

Traffic-Related Air Pollution and Childhood Asthma: Recent Advances and Remaining Gaps in the Exposure Assessment Methods.

Science.gov (United States)

Khreis, Haneen; Nieuwenhuijsen, Mark J

2017-03-17

Background : Current levels of traffic-related air pollution (TRAP) are associated with the development of childhood asthma, although some inconsistencies and heterogeneity remain. An important part of the uncertainty in studies of TRAP-associated asthma originates from uncertainties in the TRAP exposure assessment and assignment methods. In this work, we aim to systematically review the exposure assessment methods used in the epidemiology of TRAP and childhood asthma, highlight recent advances, remaining research gaps and make suggestions for further research. Methods : We systematically reviewed epidemiological studies published up until 8 September 2016 and available in Embase, Ovid MEDLINE (R), and "Transport database". We included studies which examined the association between children's exposure to TRAP metrics and their risk of "asthma" incidence or lifetime prevalence, from birth to the age of 18 years old. Results : We found 42 studies which examined the associations between TRAP and subsequent childhood asthma incidence or lifetime prevalence, published since 1999. Land-use regression modelling was the most commonly used method and nitrogen dioxide (NO₂) was the most commonly used pollutant in the exposure assessments. Most studies estimated TRAP exposure at the residential address and only a few considered the participants' mobility. TRAP exposure was mostly assessed at the birth year and only a few studies considered different and/or multiple exposure time windows. We recommend that further work is needed including e.g., the use of new exposure metrics such as the composition of particulate matter, oxidative potential and ultra-fine particles, improved modelling e.g., by combining different exposure assessment models, including mobility of the participants, and systematically investigating different exposure time windows. Conclusions : Although our previous meta-analysis found statistically significant associations for various TRAP exposures and

Traffic Related Aerosol Exposure And Their Risk Assessment Of Associated Metals In Delhi, India

Directory of Open Access Journals (Sweden)

Rajesh Kushwaha

2013-12-01

Full Text Available A pilot study was carried out in New Delhi, India, to assess the level of traffic related aerosol exposure, individually and associated metals. These investigations also try to formulate their risk assessment using different modes of transport on a typical journey to work route and compared Bus, Auto-rickshaws and Bike (Two Wheelers during the journey. The inhalable particulate matter monitored in winter period and also evaluated the potential health risk due to inhalation in the study. The exposure of Particulate matter was observed maximum in the Bike (502 ± 176.38 μgm-3 and minimum in the Auto-rickshaw (208.15 ± 61.38 μgm-3. In case of human exposure to metals (viz. Cu, Cd, Mn, Pb, Ni, Co, Cr, Fe, Zn, it was mostly exposed by Fe, Zn and Co and least exposed by Cd, Cr and Pb. Human health risk was estimated based on exposure and dosage response. The assessment of particulate-bound elements was calculated by assuming exposure of 6 h. The findings indicated that the exposure to particulate bound elements have relatively more adverse health effects. International Journal of Environment, Volume-2, Issue-1, Sep-Nov 2013, Pages 26-36 DOI: http://dx.doi.org/10.3126/ije.v2i1.9205

Exposure assessment of process-related contaminants in food by biomarker monitoring

NARCIS (Netherlands)

Rietjens, Ivonne M.C.M.; Dussort, P.; Günther, Helmut; Hanlon, Paul; Honda, Hiroshi; Mally, Angela; O’Hagan, Sue; Scholz, Gabriele; Seidel, Albrecht; Swenberg, James; Teeguarden, Justin; Eisenbrand, Gerhard

2018-01-01

Exposure assessment is a fundamental part of the risk assessment paradigm, but can often present a number of challenges and uncertainties. This is especially the case for process contaminants formed during the processing, e.g. heating of food, since they are in part highly reactive and/or volatile,

Pro-tobacco advertisement exposure among African American smokers: An ecological momentary assessment study.

Science.gov (United States)

Robinson, Cendrine D; Muench, Christine; Brede, Emily; Endrighi, Romano; Szeto, Edwin H; Sells, Joanna R; Lammers, John P; Okuyemi, Kolawole S; Izmirlian, Grant; Waters, Andrew J

2018-08-01

Many African Americans live in communities with a disproportionately high density of tobacco advertisements compared to Whites. Some research indicates that point-of-sale advertising is associated with impulse purchases of cigarettes and smoking. Ecological Momentary Assessment (EMA) can be used to examine associations between tobacco advertisement exposure and smoking variables in the natural environment. Non-treatment seeking African American smokers were given a mobile device for 2weeks (N=56). They were prompted four times per day and responded to questions about recent exposure to tobacco advertisements. Participants were also asked to indicate the number of cigarettes smoked, and if they made any purchase, or an impulse purchase, since the last assessment. Linear mixed models (LMMs) analyzed between- and within-subject associations between exposure and outcomes. Participants reported seeing at least one advertisement on 33% of assessments. Of those assessments, they reported seeing menthol advertisements on 87% of assessments. Between-subject analyses revealed that participants who on average saw more advertisements were generally more likely to report purchasing cigarettes and to purchase cigarettes on impulse. Within-subject analyses revealed that when an individual participant reported seeing more advertisements than usual they were more likely to have reported purchasing cigarettes, making an impulse purchase and smoking more cigarettes during the same period, but not the subsequent time period. Many African American smokers are frequently exposed to pro-tobacco marketing. Advertisement exposure is cross-sectionally associated with impulse purchases and smoking. Future research should assess prospective associations in more detail. Published by Elsevier Ltd.

Developing and evaluating distributions for probabilistic human exposure assessments

Energy Technology Data Exchange (ETDEWEB)

Maddalena, Randy L.; McKone, Thomas E.

2002-08-01

This report describes research carried out at the Lawrence Berkeley National Laboratory (LBNL) to assist the U. S. Environmental Protection Agency (EPA) in developing a consistent yet flexible approach for evaluating the inputs to probabilistic risk assessments. The U.S. EPA Office of Emergency and Remedial Response (OERR) recently released Volume 3 Part A of Risk Assessment Guidance for Superfund (RAGS), as an update to the existing two-volume set of RAGS. The update provides policy and technical guidance on performing probabilistic risk assessment (PRA). Consequently, EPA risk managers and decision-makers need to review and evaluate the adequacy of PRAs for supporting regulatory decisions. A critical part of evaluating a PRA is the problem of evaluating or judging the adequacy of input distributions PRA. Although the overarching theme of this report is the need to improve the ease and consistency of the regulatory review process, the specific objectives are presented in two parts. The objective of Part 1 is to develop a consistent yet flexible process for evaluating distributions in a PRA by identifying the critical attributes of an exposure factor distribution and discussing how these attributes relate to the task-specific adequacy of the input. This objective is carried out with emphasis on the perspective of a risk manager or decision-maker. The proposed evaluation procedure provides consistency to the review process without a loss of flexibility. As a result, the approach described in Part 1 provides an opportunity to apply a single review framework for all EPA regions and yet provide the regional risk manager with the flexibility to deal with site- and case-specific issues in the PRA process. However, as the number of inputs to a PRA increases, so does the complexity of the process for calculating, communicating and managing risk. As a result, there is increasing effort required of both the risk professionals performing the analysis and the risk manager

Pesticide Flow Analysis to Assess Human Exposure in Greenhouse Flower Production in Colombia

Directory of Open Access Journals (Sweden)

Claudia R. Binder

2013-03-01

Full Text Available Human exposure assessment tools represent a means for understanding human exposure to pesticides in agricultural activities and managing possible health risks. This paper presents a pesticide flow analysis modeling approach developed to assess human exposure to pesticide use in greenhouse flower crops in Colombia, focusing on dermal and inhalation exposure. This approach is based on the material flow analysis methodology. The transfer coefficients were obtained using the whole body dosimetry method for dermal exposure and the button personal inhalable aerosol sampler for inhalation exposure, using the tracer uranine as a pesticide surrogate. The case study was a greenhouse rose farm in the Bogota Plateau in Colombia. The approach was applied to estimate the exposure to pesticides such as mancozeb, carbendazim, propamocarb hydrochloride, fosetyl, carboxin, thiram, dimethomorph and mandipropamide. We found dermal absorption estimations close to the AOEL reference values for the pesticides carbendazim, mancozeb, thiram and mandipropamide during the study period. In addition, high values of dermal exposure were found on the forearms, hands, chest and legs of study participants, indicating weaknesses in the overlapping areas of the personal protective equipment parts. These results show how the material flow analysis methodology can be applied in the field of human exposure for early recognition of the dispersion of pesticides and support the development of measures to improve operational safety during pesticide management. Furthermore, the model makes it possible to identify the status quo of the health risk faced by workers in the study area.

Control banding tools for occupational exposure assessment of nanomaterials - Ready for use in a regulatory context?

DEFF Research Database (Denmark)

Liguori, Biase; Hansen, Steffen Foss; Baun, Anders

2016-01-01

area of concern. Therefore, a number of Control Banding (CB)-based tools have been developed in order to assess and manage the potential risks associated with occupational exposure to nanomaterials. In this paper we provide a comparative analysis of different nanomaterial-specific types of control-banding/risk...... developed for different purposes, with different application domains and inclusion criteria. The exposure assessments and derived risk levels are based on different concepts and assumptions and outputs in different formats. The use of requested input parameters for exposure assessment differ greatly among...... the tools. Therefore, direct inter-comparison and combination of the different models into a larger holistic framework is not immediately possible. Harmonization of input parameters and output could allow establishment of an exposure assessment framework with different levels of information requirements....

Potential exposure to clothianidin and risk assessment of manual users of treated soil.

Science.gov (United States)

Ren, JingXia; Tao, ChuanJiang; Zhang, LiYing; Ning, Jun; Mei, XiangDong; She, DongMei

2017-09-01

Treated soil is the second most prevalent application technique for all registered pesticides in China. Some developing countries also adopt this method. However, the safety of this scenario has not been reported in the literature. Experiments were therefore conducted to assess exposure using standard whole-body dosimetry and air sampling methodologies. Dermal deposition was the main route of exposure in this scenario. The total dermal unit exposure (UE) of operators to clothianidin-treated soil was 51.7 mg kg -1 AI handled (SD = 20.59, n = 16), and hands accounted for 36%. Inhalation UE was 0.04 mg kg -1 AI handled (SD = 0.02, n = 4), negligible compared with dermal exposure. Using an NOAEL (no observed adverse effect level) of 10 mg kg -1 day -1 , the margin of exposure was 773, i.e. greater than 100. For the first time, the scenario of treated soil exposure was assessed and was found to pose less risk than conventional pesticide application. These results can be used as a reference in pesticide management. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

The Diesel Exhaust in Miners Study: I. Overview of the Exposure Assessment Process

Science.gov (United States)

Stewart, Patricia A.; Coble, Joseph B.; Vermeulen, Roel; Schleiff, Patricia; Blair, Aaron; Lubin, Jay; Attfield, Michael; Silverman, Debra T.

2010-01-01

This report provides an overview of the exposure assessment process for an epidemiologic study that investigated mortality, with a special focus on lung cancer, associated with diesel exhaust (DE) exposure among miners. Details of several components are provided in four other reports. A major challenge for this study was the development of quantitative estimates of historical exposures to DE. There is no single standard method for assessing the totality of DE, so respirable elemental carbon (REC), a component of DE, was selected as the primary surrogate in this study. Air monitoring surveys at seven of the eight study mining facilities were conducted between 1998 and 2001 and provided reference personal REC exposure levels and measurements for other agents and DE components in the mining environment. (The eighth facility had closed permanently prior to the surveys.) Exposure estimates were developed for mining facility/department/job/year combinations. A hierarchical grouping strategy was developed for assigning exposure levels to underground jobs [based on job titles, on the amount of time spent in various areas of the underground mine, and on similar carbon monoxide (CO, another DE component) concentrations] and to surface jobs (based on the use of, or proximity to, diesel-powered equipment). Time trends in air concentrations for underground jobs were estimated from mining facility-specific prediction models using diesel equipment horsepower, total air flow rates exhausted from the underground mines, and, because there were no historical REC measurements, historical measurements of CO. Exposures to potentially confounding agents, i.e. respirable dust, silica, radon, asbestos, and non-diesel sources of polycyclic aromatic hydrocarbons, also were assessed. Accuracy and reliability of the estimated REC exposures levels were evaluated by comparison with several smaller datasets and by development of alternative time trend models. During 1998–2001, the average

A new methodology for the assessment of hand protection from ultraviolet exposure.

Science.gov (United States)

Khazova, M; O'Hagan, J B; Grainger, K J-L

2006-01-01

A number of industrial applications and public services involve occupational exposure to ultraviolet radiation (UVR) from a variety of lamps and lasers. The aim of this study was to develop a methodology for the assessment of the UV protection level for disposable gloves. Glove UV protection factor is defined as a time-scale increase in exposure permitted for the hand protected by a glove with respect to an unprotected hand. Our study showed that for all tested gloves a change in UVR attenuation with stretching is characteristic for the type of glove material and can be included as a scaling factor in the definition of UVR protection. Glove material has a bigger effect on UVR protection level than variations in the glove thickness or its colour. Examples of assessment of the 'worst case scenario' are compared with the protection level against a number of sources, together with the guidance on a simplified evaluation protocol. An application-specific assessment, illustrated for 'SmartWater' forensic examinations and biological trans-illuminators, demonstrates that some gloves provide inadequate protection against occupational UV exposure.

Assessment of Relationship between Spontaneous Abortion and Occupational Exposure to Organic Solvents

Directory of Open Access Journals (Sweden)

S Mohammadi

2011-04-01

Full Text Available Introduction & Objective: Nowadays, some studies indicate the adverse effects of exposure to chemicals, especially organic solvents on the reproductive system of females. This study aimed to assess the relationship between spontaneous abortion with occupational exposure to organic solvents in pharmaceutical industry. Materials & Methods: This is a cross-sectional and descriptive-analytical study which was carried out in 2010 in one of the pharmaceutical factories located in the suburbs of Tehran. During the study, married women who were working in the factory laboratory units and were exposed to mixed organic solvents were compared with married women who were working in the packing units of the factory without occupational exposure to organic solvents. Frequency of spontaneous abortion and duration of pregnancy were assessed in both two groups. Collected data were analyzed with the SPSS software using t-test, logistic regression, and chi-square test. Results: In the present study, the frequency of spontaneous abortion in employees with exposure to organic solvents mixture was 10.7%. This study showed that even after adjustment for confounding factors, there was a significant correlation between spontaneous abortion and occupational exposure to organic solvents mixture and this correlation increased with increasing levels of exposure to organic solvents. Moreover, a significant correlation was observed between occupational exposure to mixed organic solvents and waiting time to become pregnant (TTP. Furthermore, this study showed that even after adjustment for confounding variables, shift workers were significantly more affected by spontaneous abortion compared to daytime workers (P < 0.001. Conclusion: According to the results of this study, since there is probability of spontaneous abortion resulting from occupational exposure to various chemicals including organic solvents, review of the status of occupational exposure of workers can be helpful

Incidence and Mortality of Colorectal Cancer and Relationships with the Human Development Index across the World.

Science.gov (United States)

Rafiemanesh, Hosein; Mohammadian-Hafshejani, Abdollah; Ghoncheh, Mahshid; Sepehri, Zahra; Shamlou, Reza; Salehiniya, Hamid; Towhidi, Farhad; Makhsosi, Behnam Reza

2016-01-01

This study aimed to investigate the standardized incidence and mortality rate of colorectal cancer and its relationship with the human development index (HDI) across the world in 2012. This ecologic study was conducted for assessment of the correlation between age-specific incidence rate (ASIR) and age-specific mortality rate (ASMR) with HDI and its components. Data for SIR and SMR for every country for the year 2012 were obtained from the global cancer project. We used a bivariate method for assessment of the correlation between SIR and SMR and HDI. Statistical significance was assumed at <0.05. Statistical analyses were performed using SPSS (Version 22.0, SPSS Inc.). Countries with the highest SIR of colorectal cancer in the world in 2012, were Republic of Korea, Slovakia, Hungary and countries with the highest SMR were Hungary, Croatia and Slovakia. The correlation between SIR of colorectal cancer and the HDI was 0.712 (P≤0.001), with life expectancy at birth 0.513 (P≤0.001), with mean years of schooling 0.641 (P≤0.001) and with level of income per each person of the population 0.514 (P=0.013). In addition, the correlation between SMR of colorectal cancer and the HDI was 0.628 (P≤0.001), with life expectancy at birth 0.469 (P≤0.001), with mean years of schooling 0.592 (P≤0.001) and with level of income per each person of the population 0.378 (P=0.013). The highest SIR and SMR of colorectal cancer was in the WHO Europe region. There was a positive correlation between HDI and SIR and SMR of colorectal cancer.

A PROBABILISTIC EXPOSURE ASSESSMENT FOR CHILDREN WHO CONTACT CCA-TREATED PLAYSETS AND DECKS USING THE STOCHASTIC HUMAN EXPOSURE AND DOSE SIMULATION (SHEDS) MODEL FOR THE WOOD PRESERVATIVE EXPOSURE SCENARIO

Science.gov (United States)

The U.S. Environmental Protection Agency has conducted a probabilistic exposure and dose assessment on the arsenic (As) and chromium (Cr) components of Chromated Copper Arsenate (CCA) using the Stochastic Human Exposure and Dose Simulation model for wood preservatives (SHEDS-Wood...

Health Risk Assessment of Inhalation Exposure to Formaldehyde and Benzene in Newly Remodeled Buildings, Beijing

Science.gov (United States)

Huang, Lihui; Mo, Jinhan; Sundell, Jan; Fan, Zhihua; Zhang, Yinping

2013-01-01

Objective To assess health risks associated with inhalation exposure to formaldehyde and benzene mainly emitted from building and decoration materials in newly remodeled indoor spaces in Beijing. Methods We tested the formaldehyde and benzene concentrations in indoor air of 410 dwellings and 451 offices remodeled within the past year, in which the occupants had health concerns about indoor air quality. To assess non-carcinogenic health risks, we compared the data to the health guidelines in China and USA, respectively. To assess carcinogenic health risks, we first modeled indoor personal exposure to formaldehyde and benzene using the concentration data, and then estimated the associated cancer risks by multiplying the indoor personal exposure by the Inhalation Unit Risk values (IURs) provided by the U.S. EPA Integrated Risk Information System (U.S. EPA IRIS) and the California Office of Environmental Health Hazard Assessment (OEHHA), respectively. Results (1) The indoor formaldehyde concentrations of 85% dwellings and 67% offices were above the acute Reference Exposure Level (REL) recommended by the OEHHA and the concentrations of all tested buildings were above the chronic REL recommended by the OEHHA; (2) The indoor benzene concentrations of 12% dwellings and 32% offices exceeded the reference concentration (RfC) recommended by the U.S. EPA IRIS; (3) The median cancer risks from indoor exposure to formaldehyde and benzene were 1,150 and 106 per million (based on U.S. EPA IRIS IURs), 531 and 394 per million (based on OEHHA IURs). Conclusions In the tested buildings, formaldehyde exposure may pose acute and chronic non-carcinogenic health risks to the occupants, whereas benzene exposure may pose chronic non-carcinogenic risks to the occupants. Exposure to both compounds is associated with significant carcinogenic risks. Improvement in ventilation, establishment of volatile organic compounds (VOCs) emission labeling systems for decorating and refurbishing materials

Development of exposure scenarios for CERCLA risk assessments at the Savannah River Site (U)

International Nuclear Information System (INIS)

Nix, D.W.; Immel, J.W.; Phifer, M.A.

1992-01-01

Environmental Restoration (ER) activities at the Savannah River Site (SRS) begin with the characterization of inactive hazardous, radioactive and mixed waste disposal areas by a combined Resource Conservation Recovery Act (RCRA) Facility Investigation (RFI)/Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) Remedial Investigation (Rl) followed by evaluation of remedial alternatives in a RCRA Corrective Measures Study (CMS)/CERCLA Feasibility Study (FS). A CERCLA Baseline Risk Assessment (BRA) is performed during the RFVRI characterization to determine if there are any potential risks to human health or the environment from the waste unit. If it is determined that there is need for remedial action, a Risk Evaluation of Remedial Alternatives (RERA) is performed as part of the CMS/FS to provide a basis for selecting a remedy that is protective of human health and the environment. The SRS has numerous waste units to evaluate in the RFI/RI and CMS/FS programs and, in order to provide a consistent approach, four standard exposure scenarios were developed for exposure assessments to be used in human health risk assessments. The standard exposure scenarios are divided into two temporal categories: (a) Current Land Use in the BRA, and (b) Future Land Use in the RERA. The Current Land Use scenarios consist of the evaluation of human health risk for Industrial Exposure (of a worker not involved in waste unit characterization or remediation), a Trespasser, a hypothetical current On-site Resident, and an Off-site Resident. The Future Land Use scenario considers exposure to an On-site Resident following termination of institutional control in the absence of any remedial action (No Action Alternative), as well as evaluating potential remedial alternatives against the four scenarios from the BRA. A critical facet in the development of a BRA or RERA is the seeping of exposure scenarios that reflect actual conditions at a waste unit, rather than using

Potential for MERLIN-Expo, an advanced tool for higher tier exposure assessment, within the EU chemical legislative frameworks

International Nuclear Information System (INIS)

Suciu, Nicoleta; Tediosi, Alice; Ciffroy, Philippe; Altenpohl, Annette; Brochot, Céline; Verdonck, Frederik; Ferrari, Federico; Giubilato, Elisa; Capri, Ettore; Fait, Gabriella

2016-01-01

MERLIN-Expo merges and integrates advanced exposure assessment methodologies, allowing the building of complex scenarios involving several pollution sources and targets. The assessment of exposure and risks to human health from chemicals is of major concern for policy and ultimately benefits all citizens. The development and operational fusion of the advanced exposure assessment methodologies envisaged in the MERLIN-Expo tool will have a significant impact in the long term on several policies dealing with chemical safety management. There are more than 30 agencies in Europe related to exposure and risk evaluation of chemicals, which have an important role in implementing EU policies, having especially tasks of technical, scientific, operational and/or regulatory nature. The main purpose of the present paper is to introduce MERLIN-Expo and to highlight its potential for being effectively integrated within the group of tools available to assess the risk and exposure of chemicals for EU policy. The main results show that the tool is highly suitable for use in site-specific or local impact assessment, with minor modifications it can also be used for Plant Protection Products (PPPs), biocides and REACH, while major additions would be required for a comprehensive application in the field of consumer and worker exposure assessment. - Highlights: • Exposure and risk evaluation of chemicals • Coupling environmental exposure and pharmacokinetic models • MERLIN-expo as a higher tier exposure tool • MERLIN-expo potential application in EU chemical regulations • EU legislations and policies related to risk assessment and management of chemicals

Potential for MERLIN-Expo, an advanced tool for higher tier exposure assessment, within the EU chemical legislative frameworks

Energy Technology Data Exchange (ETDEWEB)

Suciu, Nicoleta, E-mail: nicoleta.suciu@unicatt.it [Università Cattolica del Sacro Cuore, 29122 Piacenza (Italy); Tediosi, Alice [Aeiforia Srl, 29027 Gariga di Podenzano (PC) (Italy); Ciffroy, Philippe [Electricité de France (EDF) R& D, National Hydraulic and Environment Laboratory, 6 quai Watier, 78400 Chatou (France); Altenpohl, Annette [Österreichisches Normungsinstitut/Austrian Standards Institute, Heinestraße 38, 1020 Wien (Austria); Brochot, Céline [INERIS, Parc ALATA, BP2, 60550 Verneuil en Halatte (France); Verdonck, Frederik [ARCHE cvba, Liefkensstraat 35d, 9032 Gent-Wondelgem (Belgium); Ferrari, Federico [Aeiforia Srl, 29027 Gariga di Podenzano (PC) (Italy); Giubilato, Elisa [University Ca Foscari Venice, Department of Environmental Sciences, Informatics and Statistics, via Torino 155, 30172 Mestre-Venice (Italy); Capri, Ettore [Università Cattolica del Sacro Cuore, 29122 Piacenza (Italy); Fait, Gabriella [EFSA, via Carlo Magno 1/a, 43126 Parma (Italy)

2016-08-15

MERLIN-Expo merges and integrates advanced exposure assessment methodologies, allowing the building of complex scenarios involving several pollution sources and targets. The assessment of exposure and risks to human health from chemicals is of major concern for policy and ultimately benefits all citizens. The development and operational fusion of the advanced exposure assessment methodologies envisaged in the MERLIN-Expo tool will have a significant impact in the long term on several policies dealing with chemical safety management. There are more than 30 agencies in Europe related to exposure and risk evaluation of chemicals, which have an important role in implementing EU policies, having especially tasks of technical, scientific, operational and/or regulatory nature. The main purpose of the present paper is to introduce MERLIN-Expo and to highlight its potential for being effectively integrated within the group of tools available to assess the risk and exposure of chemicals for EU policy. The main results show that the tool is highly suitable for use in site-specific or local impact assessment, with minor modifications it can also be used for Plant Protection Products (PPPs), biocides and REACH, while major additions would be required for a comprehensive application in the field of consumer and worker exposure assessment. - Highlights: • Exposure and risk evaluation of chemicals • Coupling environmental exposure and pharmacokinetic models • MERLIN-expo as a higher tier exposure tool • MERLIN-expo potential application in EU chemical regulations • EU legislations and policies related to risk assessment and management of chemicals.

Use of ecological exposure units in ecological risk assessment

International Nuclear Information System (INIS)

Ferenbaugh, R.; Myers, O.; Gallegos, A.; Breshears, D.; Ebinger, M.

1995-01-01

The traditional approach to ecological risk assessment at hazardous waste sites that are being evaluated for cleanup under CERCLA or RCRA requirements is to focus on the immediate impacts at or adjacent to a site. While this may be acceptable in some situations, it is not ecologically defensible in situations where there are numerous contaminated sites in proximity to each other. In the latter case, transport from the sites, potential cumulative effects, and wide-ranging receptors must be considered. The concept of the Ecological Exposure Unit (EEU) has been proposed to address this situation. Ecological Exposure Units are defined on the basis of ecological considerations and each EEU may contain several to many contaminated sites. The initial steps involved in performing ecological risk assessments using the EEU approach include (1) selection of appropriate receptors and assessment endpoints, and (2) geographical definition of EEUs. At Los Alamos National Laboratory, receptors have been identified and EEUs have been defined for these receptors. GIS is being used as a tool to map EEUs. Receptors include representatives from threatened or endangered species, species reflecting status of ecological health, species with social or cultural relevance, and other species of concern. After definition of EEUs, cumulative impacts of all stressors at all sites within each EEU must be evaluated. The two major advantages to performing ecological risk assessments using this approach are that risk assessments are performed in a more scientifically defensible manner because they are performed on ecologically defined units and that resources are used optimally by minimizing redundant remedial activities

Truncated Levy flights and agenda-based mobility are useful for the assessment of personal human exposure

International Nuclear Information System (INIS)

Schlink, Uwe; Ragas, Ad M.J.

2011-01-01

Receptor-oriented approaches can assess the individual-specific exposure to air pollution. In such an individual-based model we analyse the impact of human mobility to the personal exposure that is perceived by individuals simulated in an exemplified urban area. The mobility models comprise random walk (reference point mobility, RPM), truncated Levy flights (TLF), and agenda-based walk (RPMA). We describe and review the general concepts and provide an inter-comparison of these concepts. Stationary and ergodic behaviour are explained and applied as well as performance criteria for a comparative evaluation of the investigated algorithms. We find that none of the studied algorithm results in purely random trajectories. TLF and RPMA prove to be suitable for human mobility modelling, because they provide conditions for very individual-specific trajectories and exposure. Suggesting these models we demonstrate the plausibility of their results for exposure to air-borne benzene and the combined exposure to benzene and nonane. - Highlights: → Human exposure to air pollutants is influenced by a person's movement in the urban area. → We provide a simulation study of approaches to modelling personal exposure. → Agenda-based models and truncated Levy flights are recommended for exposure assessment. → The procedure is demonstrated for benzene exposure in an urban region. - Truncated Levy flights and agenda-based mobility are useful for the assessment of personal human exposure.

Use-exposure relationships of pesticides for aquatic risk assessment.

Directory of Open Access Journals (Sweden)

Yuzhou Luo

2011-04-01

Full Text Available Field-scale environmental models have been widely used in aquatic exposure assessments of pesticides. Those models usually require a large set of input parameters and separate simulations for each pesticide in evaluation. In this study, a simple use-exposure relationship is developed based on regression analysis of stochastic simulation results generated from the Pesticide Root-Zone Model (PRZM. The developed mathematical relationship estimates edge-of-field peak concentrations of pesticides from aerobic soil metabolism half-life (AERO, organic carbon-normalized soil sorption coefficient (KOC, and application rate (RATE. In a case study of California crop scenarios, the relationships explained 90-95% of the variances in the peak concentrations of dissolved pesticides as predicted by PRZM simulations for a 30-year period. KOC was identified as the governing parameter in determining the relative magnitudes of pesticide exposures in a given crop scenario. The results of model application also indicated that the effects of chemical fate processes such as partitioning and degradation on pesticide exposure were similar among crop scenarios, while the cross-scenario variations were mainly associated with the landscape characteristics, such as organic carbon contents and curve numbers. With a minimum set of input data, the use-exposure relationships proposed in this study could be used in screening procedures for potential water quality impacts from the off-site movement of pesticides.

A Formaldehyde Exposure Assessment Tool for Occupants of FEMA Temporary Housing Units

Energy Technology Data Exchange (ETDEWEB)

Parthasarathy, Srinandini; Spears, Michael; Maddalena, Randy L.; Russell, Marion L; Apte, Michael G.

2010-10-01

The report outlines the methodology used to develop a web-based tool to assess the formaldehyde exposure of the occupants of Federal Emergency Management Administration (FEMA) temporary housing units (THUs) after Hurricanes Katrina and Rita in 2005. Linear regression models were built using available data to retrospectively estimate the indoor temperature and relative humidity, formaldehyde emission factors and concentration, and hence the formaldehyde exposures. The interactive web-tool allows the user to define the inputs to the model to evaluate formaldehyde exposures for different scenarios.

The diesel exhaust in miners study: I. Overview of the exposure assessment process.

NARCIS (Netherlands)

Stewart, P.A.; Coble, J.B.; Vermeulen, R.; Schleiff, P.; Blair, A.; Lubin, J.; Attfield, M.; Silverman, D.T.

2010-01-01

This report provides an overview of the exposure assessment process for an epidemiologic study that investigated mortality, with a special focus on lung cancer, associated with diesel exhaust (DE) exposure among miners. Details of several components are provided in four other reports. A major

Assessment of workers’ exposure to Aflatoxin B1 in a Portuguese waste industry

OpenAIRE

Viegas, Susana; Veiga, Luísa; Figueredo, Paula; Almeida, Ana; Carolino, Elisabete; Viegas, Carla

2015-01-01

Aflatoxin B1 (AFB1) is considered by different International Agencies as a genotoxic and potent hepatocarcinogen. However, despite the fact that the fungi producing this compound are detected in some work environments, AFB1 is rarely monitored in occupational settings. The aim of the present investigation was to assess exposure to AFB1 of workers from one Portuguese waste company located in the outskirt of Lisbon. Occupational exposure assessment to AFB1 was done with a biomarker of internal ...

PRELIMINARY EXPOSURE ASSESSMENT FINDINGS FROM THE TAMPA ASTHMATIC CHILDREN'S STUDY

Science.gov (United States)

The Tampa Asthmatic Children's Study (TACS) was a pilot study that focused on developing and evaluating air pollution exposure assessment methods and participant recruiting tools. The four-week study was performed in October and November, 2003. The study involved repeated daily...

EXPOSURE ASSESSMENT FINDINGS FROM THE TAMPA ASTHMATIC CHILDREN'S STUDY (TACS)

Science.gov (United States)

The Tampa Asthmatic Children's Study (TACS) was a pilot study that focused on developing and evaluating air pollution exposure assessment methods and participant recruiting tools. The four-week study was performed in October and November, 2003. The study involved repeated daily...

A Margin-of-Exposure Approach to Assessment of Noncancer Risks of Dioxins Based on Human Exposure and Response Data

OpenAIRE

Aylward, Lesa L.; Goodman, Julie E.; Charnley, Gail; Rhomberg, Lorenz R.

2008-01-01

Background Risk assessment of human environmental exposure to polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDFs) and other dioxin-like compounds is complicated by several factors, including limitations in measuring intakes because of the low concentrations of these compounds in foods and the environment and interspecies differences in pharmacokinetics and responses. Objectives We examined the feasibility of relying directly on human studies of exposure and potential responses to...

Retrospective exposure assessment and quality control in an international multi-centre case-control study

DEFF Research Database (Denmark)

Tinnerberg, H; Heikkilä, P; Huici-Montagud, A

2003-01-01

The paper presents the exposure assessment method and quality control procedure used in an international, multi-centre case-control study within a joint Nordic and Italian cohort. This study was conducted to evaluate whether occupational exposure to carcinogens influenced the predictivity of high...... was higher among the original assessors (the assessor from the same country as the subject) than the average prevalence assessed by the other four in the quality control round. The original assessors classified more job situations as exposed than the others. Several reasons for this are plausible: real...... country-specific differences, differences in information available to the home assessor and the others and misunderstandings or difficulties in translation of information. To ensure the consistency of exposure assessments in international retrospective case-control studies it is important to have a well...

Pollution exposure on marine protected areas: A global assessment.

Science.gov (United States)

Partelow, Stefan; von Wehrden, Henrik; Horn, Olga

2015-11-15

Marine protected areas (MPAs) face many challenges in their aim to effectively conserve marine ecosystems. In this study we analyze the extent of pollution exposure on the global fleet of MPAs. This includes indicators for current and future pollution and the implications for regionally clustered groups of MPAs with similar biophysical characteristics. To cluster MPAs into characteristic signature groups, their bathymetry, baseline biodiversity, distance from shore, mean sea surface temperature and mean sea surface salinity were used. We assess the extent at which each signature group is facing exposure from multiple pollution types. MPA groups experience similar pollution exposure on a regional level. We highlight how the challenges that MPAs face can be addressed through governance at the appropriate scale and design considerations for integrated terrestrial and marine management approaches within regional level networks. Furthermore, we present diagnostic social-ecological indicators for addressing the challenges facing unsuccessful MPAs with practical applications. Copyright © 2015 Elsevier Ltd. All rights reserved.

Multimedia radionuclide exposure assessment modeling. Annual report, October 1980-September 1981

International Nuclear Information System (INIS)

Whelan, G.; Onishi, Y.; Simmons, C.S.; Horst, T.W.; Gupta, S.K.; Orgill, M.M.; Newbill, C.A.

1982-12-01

Pacific Northwest Laboratory (PNL) and Los Alamos National Laboratory (LANL) are jointly developing a methodology for assessing exposures of the air, water, and plants to radionuclides as part of an overall development effort of a radionuclide disposal site evaluation methodology. Work in FY-1981 continued the development of the Multimedia Contaminant Environmental Exposure Assessment (MCEA) methodology and initiated an assessment of radionuclide migration in Los Alamos and Pueblo Canyons, New Mexico, using the methodology. The AIRTRAN model was completed, briefly tested, and documented. In addition, a literature search for existing validation data for AIRTRAN was performed. The feasibility and advisability of including the UNSAT moisture flow model as a submodel of the terrestrial code BIOTRAN was assessed. A preliminary application of the proposed MCEA methodology, as it related to the Mortandad-South Mortandad Canyon site in New Mexico is discussed. This preliminary application represented a scaled-down version of the methodology in which only the terrestrial, overland, and surface water components were used. An update describing the progress in the assessment of radionuclide migration in Los Alamos and Pueblo Canyons is presented. 38 references, 47 figures, 11 tables

Annual report, October 1980-September 1981 Multimedia radionuclide exposure assessment modeling.

Energy Technology Data Exchange (ETDEWEB)

Whelan, G.; Onishi, Y.; Simmons, C.S.; Horst, T.W.; Gupta, S.K.; Orgill, M.M.; Newbill, C.A.

1982-12-01

Pacific Northwest Laboratory (PNL) and Los Alamos National Laboratory (LANL) are jointly developing a methodology for assessing exposures of the air, water, and plants to radionuclides as part of an overall development effort of a radionuclide disposal site evaluation methodology. Work in FY-1981 continued the development of the Multimedia Contaminant Environmental Exposure Assessment (MCEA) methodology and initiated an assessment of radionuclide migration in Los Alamos and Pueblo Canyons, New Mexico, using the methodology. The AIRTRAN model was completed, briefly tested, and documented. In addition, a literature search for existing validation data for AIRTRAN was performed. The feasibility and advisability of including the UNSAT moisture flow model as a submodel of the terrestrial code BIOTRAN was assessed. A preliminary application of the proposed MCEA methodology, as it related to the Mortandad-South Mortandad Canyon site in New Mexico is discussed. This preliminary application represented a scaled-down version of the methodology in which only the terrestrial, overland, and surface water components were used. An update describing the progress in the assessment of radionuclide migration in Los Alamos and Pueblo Canyons is presented. 38 references, 47 figures, 11 tables.

Improved use of workplace exposure data in the regulatory risk assessment of chemicals within Europe.

Science.gov (United States)

Money, C D; Margary, S A

2002-04-01

The process of risk assessment for human health demands the availability of soundly based effects and exposure information. However, many of the available data, particularly those which seek to describe human exposures to chemicals, are of varying quality and scope. Changing public and regulatory expectations increasingly demand that the outcomes of risk assessments are seen to have duly accounted for these data, in order that their conclusions can be viewed as valid. The challenge for risk assessors, therefore, is how the different grades of data should be integrated within the overall process. A series of core values are identified that govern the relationships and the influence that different types of exposure data have within European Union (EU) regulatory risk assessment for chemicals. Building on these values, an approach is presented for evaluating workplace exposure information in the context of how such data might be used within the EU process for assessing the risks to human health of new and existing substances. The implications of adopting the approach for regulatory risk assessment within the EU and its consequent impact on current occupational hygiene practice are discussed.

Assessment of Aircrew Radiation Exposure by further measurements and model development

International Nuclear Information System (INIS)

Lewis, B. J.; Desormeaux, M.; Green, A. R.; Bennett, L. G. I.; Butler, A.; McCall, M.; Saez Vergara, J. C.

2004-01-01

A methodology is presented for collecting and analysing exposure measurements from galactic cosmic radiation using a portable equipment suite and encapsulating these data into a semi-empirical model/Predictive Code for Aircrew Radiation Exposure (PCAIRE) for the assessment of aircrew radiation exposure on any flight over the solar cycle. The PCAIRE code has been validated against integral route dose measurements at commercial aircraft altitudes during experimental flights made by various research groups over the past 5 y with code predictions typically within ±20% of the measured data. An empirical correlation, based on ground-level neutron monitoring data, is detailed further for estimation of aircrew exposure from solar particle events. The semi-empirical models have been applied to predict the annual and career exposure of a flight crew member using actual flight roster data, accounting for contributions from galactic radiation and several solar energetic-particle events over the period 1973-2002. (authors)

Retrospective beryllium exposure assessment at the Rocky Flats Environmental Technology site

International Nuclear Information System (INIS)

Barnard, A.E.; Torma-Krajewski, J.; Viet, S.M.

1997-01-01

Since the 1960's, beryllium machining was performed to make nuclear weapon components at the Department of Energy (DOE) Rocky Flats Plant. Beryllium exposure was assessed via fixed airhead (FAH) sampling in which the filter cassette was affixed to the machine, generally within a few feet of the worker's breathing zone. Approximately 500,000 FAH samples were collected for beryllium over three decades. From 1984 to 1987, personal breathing zone (PBZ) samples were also collected as part of the evaluation of a new high velocity/low volume local exhaust ventilation (HV/LV LEV) system. The purpose of this study was to determine how the two types of sampling data could be used for an exposure assessment in the beryllium shop

Quantitative assessment of exposure and risk for three carcinogenics in long-standing pollution sites

International Nuclear Information System (INIS)

Wichmann, H.E.; Wuppertal Univ.; Ihme, W.; Mekel, O.C.L.; Wuppertal Univ.

1993-01-01

The project attempts a quantitative assessment of risks for three carcinogenics that are common in sites of long-standing pollution. Benzo(a)pyrene stands for the group of polycyclic aromatic hydrocarbons, cadmium for heavy metals, and benzene for volatile aromatic compounds. The report discusses the general fundamentals of exposure and risk assessment. The exposure model is described in detail and applied to the three test substances. (orig./MG) [de

An assessment of air pollutant exposure methods in Mexico City, Mexico.

Science.gov (United States)

Rivera-González, Luis O; Zhang, Zhenzhen; Sánchez, Brisa N; Zhang, Kai; Brown, Daniel G; Rojas-Bracho, Leonora; Osornio-Vargas, Alvaro; Vadillo-Ortega, Felipe; O'Neill, Marie S

2015-05-01

Geostatistical interpolation methods to estimate individual exposure to outdoor air pollutants can be used in pregnancy cohorts where personal exposure data are not collected. Our objectives were to a) develop four assessment methods (citywide average (CWA); nearest monitor (NM); inverse distance weighting (IDW); and ordinary Kriging (OK)), and b) compare daily metrics and cross-validations of interpolation models. We obtained 2008 hourly data from Mexico City's outdoor air monitoring network for PM10, PM2.5, O3, CO, NO2, and SO2 and constructed daily exposure metrics for 1,000 simulated individual locations across five populated geographic zones. Descriptive statistics from all methods were calculated for dry and wet seasons, and by zone. We also evaluated IDW and OK methods' ability to predict measured concentrations at monitors using cross validation and a coefficient of variation (COV). All methods were performed using SAS 9.3, except ordinary Kriging which was modeled using R's gstat package. Overall, mean concentrations and standard deviations were similar among the different methods for each pollutant. Correlations between methods were generally high (r=0.77 to 0.99). However, ranges of estimated concentrations determined by NM, IDW, and OK were wider than the ranges for CWA. Root mean square errors for OK were consistently equal to or lower than for the IDW method. OK standard errors varied considerably between pollutants and the computed COVs ranged from 0.46 (least error) for SO2 and PM10 to 3.91 (most error) for PM2.5. OK predicted concentrations measured at the monitors better than IDW and NM. Given the similarity in results for the exposure methods, OK is preferred because this method alone provides predicted standard errors which can be incorporated in statistical models. The daily estimated exposures calculated using these different exposure methods provide flexibility to evaluate multiple windows of exposure during pregnancy, not just trimester or

Shifting the Physical Inactivity Curve Worldwide by Closing the Gender Gap.

Science.gov (United States)

Mielke, Grégore I; da Silva, Inacio Crochemore M; Kolbe-Alexander, Tracy L; Brown, Wendy J

2018-02-01

The aims of this study were to (i) examine gender differences in physical inactivity in countries with different levels of Human Development Index (HDI); and (ii) assess whether small changes in the prevalence of inactivity in women could achieve the World Health Organization's (WHO) global inactivity target. Data on inactivity were extracted for 142 countries for the year 2010 from the WHO Data Repository. Data for HDI were obtained for the year 2010 from the United Nations Development Program. Absolute and relative gender differences were calculated for countries according to four HDI categories. The potential effects of increasing women's activity levels on achievement of the WHO physical inactivity target were computed. Overall inactivity prevalence was higher in women (27%) than in men (20%). Women were more inactive than men in all except eight countries. Absolute gender differences [median 7.5% (range -10.1 to 33.2)] did not vary by HDI category, but there was a small negative correlation between relative gender difference in inactivity and HDI (rho -0.19; p = 0.02), which was mostly influenced by three outlier countries with low HDI. A decrease in inactivity levels of 4.8% points among women across the world would achieve the WHO target of reducing global levels of inactivity by 10%. Gender differences in the prevalence of physical inactivity were highly variable, both within and across categories of HDI. Interventions which result in small changes in inactivity prevalence in women would achieve the 2025 WHO global target for inactivity, without any change to the prevalence in men.

Occupational hand eczema caused by nickel and evaluated by quantitative exposure assessment

DEFF Research Database (Denmark)

Jensen, Peter; Thyssen, Jacob Pontoppidan; Johansen, Jeanne D

2011-01-01

Background. EU legislation has reduced the epidemic of nickel contact allergy affecting the consumer, and shifted the focus towards occupational exposure. The acid wipe sampling technique was developed to quantitatively determine skin exposure to metals. Objectives. To assess the clinical...... dilution series were performed. Results. Nickel was detected in all samples from the hands. In all patients, the nickel content on the hands was higher than on the non-exposed control area. Conclusions. Occupational exposure to nickel-releasing items raised the nickel content on exposed skin as compared...

The Validity and Applicability of Using a Generic Exposure Assessment Model for Occupational Exposure to Nano-Objects and Their Aggregates and Agglomerates

NARCIS (Netherlands)

Bekker, Cindy; Voogd, Eef; Fransman, Wouter; Vermeulen, Roel

2016-01-01

BACKGROUND: Control banding can be used as a first-tier assessment to control worker exposure to nano-objects and their aggregates and agglomerates (NOAA). In a second tier, more advanced modelling approaches are needed to produce quantitative exposure estimates. As currently no general quantitative

The validity and applicability of using a generic exposure assessment model for occupational exposure to nano-objects and their aggregates and agglomerates

NARCIS (Netherlands)

Bekker, C.; Voogd, E.; Fransman, W.; Vermeulen, R.

2016-01-01

Background: Control banding can be used as a first-tier assessment to control worker exposure to nano-objects and their aggregates and agglomerates (NOAA). In a second tier, more advanced modelling approaches are needed to produce quantitative exposure estimates. As currently no general quantitative

Air pollution in moderately polluted urban areas: How does the definition of “neighborhood” impact exposure assessment?

International Nuclear Information System (INIS)

Tenailleau, Quentin M.; Mauny, Frédéric; Joly, Daniel; François, Stéphane; Bernard, Nadine

2015-01-01

Environmental health studies commonly quantify subjects' pollution exposure in their neighborhood. How this neighborhood is defined can vary, however, leading to different approaches to quantification whose impacts on exposure levels remain unclear. We explore the relationship between neighborhood definition and exposure assessment. NO 2 , benzene, PM 10 and PM 2.5 exposure estimates were computed in the vicinity of 10,825 buildings using twelve exposure assessment techniques reflecting different definitions of “neighborhood”. At the city scale, its definition does not significantly influence exposure estimates. It does impact levels at the building scale, however: at least a quarter of the buildings' exposure estimates for a 400 m buffer differ from the estimated 50 m buffer value (±1.0 μg/m 3 for NO 2 , PM 10 and PM 2.5 ; and ±0.05 μg/m 3 for benzene). This variation is significantly related to the definition of neighborhood. It is vitally important for investigators to understand the impact of chosen assessment techniques on exposure estimates. - Highlights: • Residential building air pollution was calculated using 12 assessment techniques. • These techniques refer to common epidemiological definitions of neighborhood. • At the city scale, neighborhood definition does not impact exposure estimates. • At the building scale, neighborhood definition does impact exposure estimates. • The impact of neighborhood definition varies with physical/deprivation variables. - Ignoring the impact of the neighborhood's definition on exposure estimates could lead to exposure quantification errors that impact resulting health studies, health risk evaluation, and consequently all the decision-making process.

Occupational exposure assessment in a radioactive facility: a preliminary evaluation

International Nuclear Information System (INIS)

Alves, Alice dos Santos; Gerulis, Eduardo; Sanches, Matias P.; Carneiro, Janete C.G.G.

2013-01-01

The risk that a worker has found on the job is a function of the hazards present and his exposure level to those hazards. Exposure and risk assessment is therefore the heart of all occupational health and industrial hygiene programs involving a continuous process of information gathering. The use of a systematic method to characterize workplace exposures to chemical, physical and biological risks is a fundamental part of this process. This study aims to carry out a preliminary evaluation in a radioactive facility, identifying potential exposures and consequently the existing occupational hazards (risk/agent) in the workplace which the employee is subject. The study is based on proposal to carry out a basic characterization of the facility, which could be the first step in the investigation of occupational exposure. For this study was essential to know the workplace, potential risks and agents; workforce profile including assignment of tasks, sources of exposure processes, and control measures. The main tool used in this study was based on references, records, standards, procedures, interviews with the workers and with management. Since the basic characterization of the facility has been carried out, consequently the potential exposure to the agents of risks to workers has been identified. The study provided an overview of the perception of risk founded at facility studied. It is expected to contribute with the occupational health program resources for welfare of the worker. (author)

Occupational exposure assessment in a radioactive facility: a preliminary evaluation

Energy Technology Data Exchange (ETDEWEB)

Alves, Alice dos Santos; Gerulis, Eduardo; Sanches, Matias P.; Carneiro, Janete C.G.G., E-mail: alicesante@hotmail.com [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2013-07-01

The risk that a worker has found on the job is a function of the hazards present and his exposure level to those hazards. Exposure and risk assessment is therefore the heart of all occupational health and industrial hygiene programs involving a continuous process of information gathering. The use of a systematic method to characterize workplace exposures to chemical, physical and biological risks is a fundamental part of this process. This study aims to carry out a preliminary evaluation in a radioactive facility, identifying potential exposures and consequently the existing occupational hazards (risk/agent) in the workplace which the employee is subject. The study is based on proposal to carry out a basic characterization of the facility, which could be the first step in the investigation of occupational exposure. For this study was essential to know the workplace, potential risks and agents; workforce profile including assignment of tasks, sources of exposure processes, and control measures. The main tool used in this study was based on references, records, standards, procedures, interviews with the workers and with management. Since the basic characterization of the facility has been carried out, consequently the potential exposure to the agents of risks to workers has been identified. The study provided an overview of the perception of risk founded at facility studied. It is expected to contribute with the occupational health program resources for welfare of the worker. (author)

Assessing public exposure in commercial flights in Brazil

Energy Technology Data Exchange (ETDEWEB)

Alves, Vanusa A.; Rochedo, Elaine R.R.; Damasceno, Nadya M.P., E-mail: vanusa_abreu@ymail.com, E-mail: elainerochedo@gmail.com, E-mail: nadya@ime.eb.br [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil); Silva, Diogo N.G., E-mail: diogongs@gmail.com [Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil)

2013-07-01

The exposure to cosmic radiation from air traveling is significantly higher than that at ground level, varying according to the route due to the effect of latitude and flight time, to the flight altitude, due to the type of airplane and to the year, due to the effect of solar cycle on the galactic cosmic rays flux. The computer code CARI-6, developed by the U.S. Federal Aviation Administration, is aimed to calculate the effective dose of galactic cosmic radiation received by an individual in an airplane, flying the shortest route between two airports in the world. The objective of this work is to estimate the contribution of the exposure to cosmic radiation on domestic commercial flights for the Brazilian customers. The work shall serve as a baseline for future comparisons of the growth of civil aviation in the country. It shall also open perspectives for discussions on the concept of risk and its public acceptance, relevant to the establishment of radiological protection guidelines. Average effective doses for individual flights ranged from 0.2 to 8.8 μSv. This is a very small contribution to average overall exposure to natural background radiation (2.4 mSv/y). Doses for the most frequent flight routes in the country have been assessed. These include flights to and from Rio de Janeiro, Sao Paulo and Brasilia. Doses for frequent flyers and collective doses are discussed in perspective of other exposure sources. (author)

Assessing public exposure in commercial flights in Brazil

International Nuclear Information System (INIS)

Alves, Vanusa A.; Rochedo, Elaine R.R.; Damasceno, Nadya M.P.; Silva, Diogo N.G.

2013-01-01

The exposure to cosmic radiation from air traveling is significantly higher than that at ground level, varying according to the route due to the effect of latitude and flight time, to the flight altitude, due to the type of airplane and to the year, due to the effect of solar cycle on the galactic cosmic rays flux. The computer code CARI-6, developed by the U.S. Federal Aviation Administration, is aimed to calculate the effective dose of galactic cosmic radiation received by an individual in an airplane, flying the shortest route between two airports in the world. The objective of this work is to estimate the contribution of the exposure to cosmic radiation on domestic commercial flights for the Brazilian customers. The work shall serve as a baseline for future comparisons of the growth of civil aviation in the country. It shall also open perspectives for discussions on the concept of risk and its public acceptance, relevant to the establishment of radiological protection guidelines. Average effective doses for individual flights ranged from 0.2 to 8.8 μSv. This is a very small contribution to average overall exposure to natural background radiation (2.4 mSv/y). Doses for the most frequent flight routes in the country have been assessed. These include flights to and from Rio de Janeiro, Sao Paulo and Brasilia. Doses for frequent flyers and collective doses are discussed in perspective of other exposure sources. (author)

The MULTIMEDIA exposure model as a risk assessment tool at LUST sites

International Nuclear Information System (INIS)

Bowers, R.B.

1994-01-01

In the course of characterizing Leaking Underground Storage Tank (LUST) sites in the Commonwealth, Virginia Department of Environmental Quality (VDEQ) regulations section 6.5.A.2.b of VR-680-13-02, requires that a risk assessment be performed which must address, among other issues, aqueous phase contaminant exposure levels to critical receptors. often, during the course of conducting such an assessment, the aqueous phase contaminant plume has not yet intercepted the critical down gradient receptor. Thus, the determination of the maximum potential exposure level to this receptor can only be made through the use of an appropriate fate and transport model. This paper focuses on an application of the saturated zone module of the USEPA's MULTIMEDIA Exposure Assessment model. The case study presented involves a LUST site in the Commonwealth, in which four critical receptors of leaded gasoline contaminated groundwater were identified. These receptors included three residential water wells and an intermittent stream. At this particular site, the aqueous phase contaminant plume had not yet reached any of the receptors; and the MULTIMEDIA model was employed to predict the steady-state aqueous phase concentrations with very favorable results

Quantitative assessment of human and pet exposure to Salmonella associated with dry pet foods.

Science.gov (United States)

Lambertini, Elisabetta; Buchanan, Robert L; Narrod, Clare; Ford, Randall M; Baker, Robert C; Pradhan, Abani K

2016-01-04

Recent Salmonella outbreaks associated with dry pet foods and treats highlight the importance of these foods as previously overlooked exposure vehicles for both pets and humans. In the last decade efforts have been made to raise the safety of this class of products, for instance by upgrading production equipment, cleaning protocols, and finished product testing. However, no comprehensive or quantitative risk profile is available for pet foods, thus limiting the ability to establish safety standards and assess the effectiveness of current and proposed Salmonella control measures. This study sought to develop an ingredients-to-consumer quantitative microbial exposure assessment model to: 1) estimate pet and human exposure to Salmonella via dry pet food, and 2) assess the impact of industry and household-level mitigation strategies on exposure. Data on prevalence and concentration of Salmonella in pet food ingredients, production process parameters, bacterial ecology, and contact transfer in the household were obtained through literature review, industry data, and targeted research. A probabilistic Monte Carlo modeling framework was developed to simulate the production process and basic household exposure routes. Under the range of assumptions adopted in this model, human exposure due to handling pet food is null to minimal if contamination occurs exclusively before extrusion. Exposure increases considerably if recontamination occurs post-extrusion during coating with fat, although mean ingested doses remain modest even at high fat contamination levels, due to the low percent of fat in the finished product. Exposure is highly variable, with the distribution of doses ingested by adult pet owners spanning 3Log CFU per exposure event. Child exposure due to ingestion of 1g of pet food leads to significantly higher doses than adult doses associated with handling the food. Recontamination after extrusion and coating, e.g., via dust or equipment surfaces, may also lead to

Assessment of Occupational Exposure to Bisphenol A in Five Different Production Companies in Finland.

Science.gov (United States)

Heinälä, Milla; Ylinen, Katriina; Tuomi, Tapani; Santonen, Tiina; Porras, Simo P

2017-01-01

The aim of the study was to assess occupational exposure to bisphenol A in Finland. Five companies took part in the research project: two paint factories (liquid and powder paints), a composite product factory, a thermal paper factory, and a tractor factory. Exposure was assessed by measuring total bisphenol A excretion (free and conjugated) from urine samples, and its concentrations in the air. The results revealed the specific work tasks in two of five companies in which significant occupational exposure to bisphenol A may occur. In the manufacturing of liquid paint hardener, urine samples collected after the working day showed bisphenol A levels of up to 100-170 µg l-1. Workers in thermal paper manufacturing were also exposed to bisphenol A, especially those working in the manufacture of coating material and operating coating machines. Median concentrations of the post-shift urine samples of coating machine workers were in the range of 130-250 µg l-1. The highest bisphenol A concentrations were in the range of 1000-1500 µg l-1. Recommendations for more effective personal protection resulted in decreased exposure, particularly among coating machine operators. In the rest of the companies, urinary bisphenol A levels were typically in the range of those of the general population. Bisphenol A concentrations in air samples were typically low (<40 µg m-3), except in some short-term duties related to the handling of solid bisphenol A (maximum 17.6 mg m-3). Low air levels, even in the companies with high urinary levels, suggest exposure via dermal contact. According to the results, exposure to bisphenol A may occur particularly in work tasks that involve the use of pure bisphenol A. In these tasks, special attention should be paid to the prevention of skin exposure. Inhalation exposure may become relevant in dusty work tasks. Since skin exposure is of potential concern in these tasks, biomonitoring is recommended as the method for assessing occupational exposure to

Influence of exposure assessment and parameterization on exposure response. Aspects of epidemiologic cohort analysis using the Libby Amphibole asbestos worker cohort.

Science.gov (United States)

Bateson, Thomas F; Kopylev, Leonid

2015-01-01

Recent meta-analyses of occupational epidemiology studies identified two important exposure data quality factors in predicting summary effect measures for asbestos-associated lung cancer mortality risk: sufficiency of job history data and percent coverage of work history by measured exposures. The objective was to evaluate different exposure parameterizations suggested in the asbestos literature using the Libby, MT asbestos worker cohort and to evaluate influences of exposure measurement error caused by historically estimated exposure data on lung cancer risks. Focusing on workers hired after 1959, when job histories were well-known and occupational exposures were predominantly based on measured exposures (85% coverage), we found that cumulative exposure alone, and with allowance of exponential decay, fit lung cancer mortality data similarly. Residence-time-weighted metrics did not fit well. Compared with previous analyses based on the whole cohort of Libby workers hired after 1935, when job histories were less well-known and exposures less frequently measured (47% coverage), our analyses based on higher quality exposure data yielded an effect size as much as 3.6 times higher. Future occupational cohort studies should continue to refine retrospective exposure assessment methods, consider multiple exposure metrics, and explore new methods of maintaining statistical power while minimizing exposure measurement error.

Socioeconomic status is associated with global diabetes prevalence.

Science.gov (United States)

Xu, Zhiye; Yu, Dan; Yin, Xueyao; Zheng, Fenping; Li, Hong

2017-07-04

The incidence of diabetes is increasing globally. We investigated the relationship between diabetes prevalence and patient socioeconomic status across multiple countries. We searched PubMed to identify population-based surveys reporting diabetes prevalence between 1990 and May 2016. Search results were filtered, and Human Development Index (HDI) values from the United Nations Development Programme were used to assess socioeconomic status for a given nation. Our analysis included 45 national surveys from 32 countries. Diabetes prevalence was positively correlated with national HDI (r = 0.421 P = 0.041) in developing countries, and negatively correlated with HDI (r = -0.442 P = 0.045) in developed countries. Diabetes prevalence trends were the same in women and men, although men were associated with increased diabetes risk in developed countries (r = 0.459 P = 0.048). Thus, diabetes prevalence rises with increasing HDI in developing countries, and this is reversed in developed countries. Ours is the first study to investigate the relationship between diabetes and socioeconomic status at global level using HDI values. These results will aid in evaluating global diabetes prevalence and risk with respect to patient socioeconomic status, and will be useful in the development of policies that help reduce disease incidence.

An assessment of occupational exposure to polycyclic aromatic hydrocarbons in the UK.

Science.gov (United States)

Unwin, John; Cocker, John; Scobbie, Emma; Chambers, Helen

2006-06-01

A cross-industry occupational hygiene survey was commissioned by the Health and Safety Executive (HSE) to determine the levels of polycyclic aromatic hydrocarbon (PAH) exposure in UK industry and to determine if one or more target analytes were suitable as markers for assessing total exposure to PAHs. There were no broadly applicable UK exposure standards for assessing total exposure to PAHs. Until 1993 a guidance value for assessing exposure in coke ovens only, where PAH exposure is known to be the highest, was based on gravimetric analysis of cyclohexane-soluble material. Biological monitoring based on urinary 1-hydroxypyrene (1-OHP) is widely reported to be an effective indicator of exposure by both dermal and inhalation routes but there was no UK guidance value. The survey involved an occupational hygiene study of 25 sites using both airborne monitoring of a total of 17 individual PAHs and biological monitoring. The results showed 8 h TWA levels of total PAH in air ranged from 0.4 to 1912.6 microg m(-3) with a GM of 15.8 microg m(-3). The profile of PAHs was dominated by naphthalene, the most volatile 2-ring PAH. Airborne benzo(a)pyrene (BaP) correlated well (r(2) = 0.971) with levels of carcinogenic 4-6 ring PAHs and was an effective marker of exposure for all industries where significant particle bound PAH levels were found and, in particular, for CTPV exposure. The 8 h TWA levels of BaP ranged from <0.01 to 6.21 microg m(-3) with a GM of 0.036 microg m(-3); 90% were <0.75 microg m(-3) and 95% were <2.0 microg m(-3). Two hundred and eighteen urine samples collected from different workers at the end of shift and 213 samples collected pre-shift next day were analysed for 1-OHP. Levels of 1-OHP in end-of-shift samples were generally higher than those in pre-shift-next-day samples and showed a good correlation (r(2) = 0.768) to airborne BaP levels if samples from workers using respiratory protection or with significant dermal exposure were excluded. Urinary 1-OHP

Separating sensitivity from exposure in assessing extinction risk from climate change.

Science.gov (United States)

Dickinson, Maria G; Orme, C David L; Suttle, K Blake; Mace, Georgina M

2014-11-04

Predictive frameworks of climate change extinction risk generally focus on the magnitude of climate change a species is expected to experience and the potential for that species to track suitable climate. A species' risk of extinction from climate change will depend, in part, on the magnitude of climate change the species experiences, its exposure. However, exposure is only one component of risk. A species' risk of extinction will also depend on its intrinsic ability to tolerate changing climate, its sensitivity. We examine exposure and sensitivity individually for two example taxa, terrestrial amphibians and mammals. We examine how these factors are related among species and across regions and how explicit consideration of each component of risk may affect predictions of climate change impacts. We find that species' sensitivities to climate change are not congruent with their exposures. Many highly sensitive species face low exposure to climate change and many highly exposed species are relatively insensitive. Separating sensitivity from exposure reveals patterns in the causes and drivers of species' extinction risk that may not be evident solely from predictions of climate change. Our findings emphasise the importance of explicitly including sensitivity and exposure to climate change in assessments of species' extinction risk.

Assessing global exposure and vulnerability towards natural hazards: the Disaster Risk Index

Directory of Open Access Journals (Sweden)

P. Peduzzi

2009-07-01

Full Text Available This paper presents a model of factors influencing levels of human losses from natural hazards at the global scale, for the period 1980–2000. This model was designed for the United Nations Development Programme as a building stone of the Disaster Risk Index (DRI, which aims at monitoring the evolution of risk. Assessing what countries are most at risk requires considering various types of hazards, such as droughts, floods, cyclones and earthquakes. Before assessing risk, these four hazards were modelled using GIS and overlaid with a model of population distribution in order to extract human exposure. Human vulnerability was measured by crossing exposure with selected socio-economic parameters. The model evaluates to what extent observed past losses are related to population exposure and vulnerability. Results reveal that human vulnerability is mostly linked with country development level and environmental quality. A classification of countries is provided, as well as recommendations on data improvement for future use of the model.

A Conceptual Framework for the Assessment of Cumulative Exposure to Air Pollution at a Fine Spatial Scale

Directory of Open Access Journals (Sweden)

Kihal-Talantikite Wahida

2016-03-01

Full Text Available Many epidemiological studies examining long-term health effects of exposure to air pollutants have characterized exposure by the outdoor air concentrations at sites that may be distant to subjects’ residences at different points in time. The temporal and spatial mobility of subjects and the spatial scale of exposure assessment could thus lead to misclassification in the cumulative exposure estimation. This paper attempts to fill the gap regarding cumulative exposure assessment to air pollution at a fine spatial scale in epidemiological studies investigating long-term health effects. We propose a conceptual framework showing how major difficulties in cumulative long-term exposure assessment could be surmounted. We then illustrate this conceptual model on the case of exposure to NO2 following two steps: (i retrospective reconstitution of NO2 concentrations at a fine spatial scale; and (ii a novel approach to assigning the time-relevant exposure estimates at the census block level, using all available data on residential mobility throughout a 10- to 20-year period prior to that for which the health events are to be detected. Our conceptual framework is both flexible and convenient for the needs of different epidemiological study designs.

A Conceptual Framework for the Assessment of Cumulative Exposure to Air Pollution at a Fine Spatial Scale

Science.gov (United States)

Wahida, Kihal-Talantikite; Padilla, Cindy M.; Denis, Zmirou-Navier; Olivier, Blanchard; Géraldine, Le Nir; Philippe, Quenel; Séverine, Deguen

2016-01-01

Many epidemiological studies examining long-term health effects of exposure to air pollutants have characterized exposure by the outdoor air concentrations at sites that may be distant to subjects’ residences at different points in time. The temporal and spatial mobility of subjects and the spatial scale of exposure assessment could thus lead to misclassification in the cumulative exposure estimation. This paper attempts to fill the gap regarding cumulative exposure assessment to air pollution at a fine spatial scale in epidemiological studies investigating long-term health effects. We propose a conceptual framework showing how major difficulties in cumulative long-term exposure assessment could be surmounted. We then illustrate this conceptual model on the case of exposure to NO2 following two steps: (i) retrospective reconstitution of NO2 concentrations at a fine spatial scale; and (ii) a novel approach to assigning the time-relevant exposure estimates at the census block level, using all available data on residential mobility throughout a 10- to 20-year period prior to that for which the health events are to be detected. Our conceptual framework is both flexible and convenient for the needs of different epidemiological study designs. PMID:26999170

Tools for regulatory assessment of occupational exposure: Development and challenges

NARCIS (Netherlands)

Tielemans, E.; Warren, N.; Schneider, T.; Tischer, M.; Ritchie, P.; Goede, H.; Kromhout, H.; Hemmen, J. van; Cherrie, J.W.

2007-01-01

REACH (Registration, Evaluation and Authorization of CHemicals) requires improved exposure models that can be incorporated into screening tools and refined assessment tools. These are referred to as tier 1 and 2 models, respectively. There are a number of candidate in tier 1 models that could be

Biocides Steering Group on human exposure assessment: A preliminary report

NARCIS (Netherlands)

Hemmen, J.J. van

1999-01-01

In a project granted by DG XI of the European Commission, it is attempted to collate experimental and theoretical data on human (workers and consumers) exposure assessment to biocidal products, and to outline the methodology for sampling and measurement. On the basis of the available evidence,

Indoor transformer stations and ELF magnetic field exposure: use of transformer structural characteristics to improve exposure assessment.

Science.gov (United States)

Okokon, Enembe Oku; Roivainen, Päivi; Kheifets, Leeka; Mezei, Gabor; Juutilainen, Jukka

2014-01-01

Previous studies have shown that populations of multiapartment buildings with indoor transformer stations may serve as a basis for improved epidemiological studies on the relationship between childhood leukaemia and extremely-low-frequency (ELF) magnetic fields (MFs). This study investigated whether classification based on structural characteristics of the transformer stations would improve ELF MF exposure assessment. The data included MF measurements in apartments directly above transformer stations ("exposed" apartments) in 30 buildings in Finland, and reference apartments in the same buildings. Transformer structural characteristics (type and location of low-voltage conductors) were used to classify exposed apartments into high-exposure (HE) and intermediate-exposure (IE) categories. An exposure gradient was observed: both the time-average MF and time above a threshold (0.4 μT) were highest in the HE apartments and lowest in the reference apartments, showing a statistically significant trend. The differences between HE and IE apartments, however, were not statistically significant. A simulation exercise showed that the three-category classification did not perform better than a two-category classification (exposed and reference apartments) in detecting the existence of an increased risk. However, data on the structural characteristics of transformers is potentially useful for evaluating exposure-response relationship.

An ignored risk factor in toxicology: The total imprecision of exposure assessment

DEFF Research Database (Denmark)

Grandjean, Philippe; Budtz-Jørgensen, Esben

2010-01-01

twice as much for maternal hair. The total imprecision of these biomarkers much exceeded the normal laboratory variability of less than 5%. Such imprecision can cause underestimation of dose-related toxicity, and data analysis should therefore include sensitivity analyses that take this factor...... were determined in cord blood, cord tissue, and maternal hair. We determined their mutual correlations and their associations with the child's neurobehavioral effect variables at age 7 years. The exposure biomarkers correlated well with one another, but the cord blood mercury concentration showed......Quality assurance of exposure biomarkers usually focuses on laboratory performance only. Using data from a prospective birth cohort study in the Faroe Islands, we have assessed the total imprecision of exposure biomarkers. As biomarkers of prenatal methylmercury exposure, mercury concentrations...

A tiered asthma hazard characterization and exposure assessment approach for evaluation of consumer product ingredients.

Science.gov (United States)

Maier, Andrew; Vincent, Melissa J; Parker, Ann; Gadagbui, Bernard K; Jayjock, Michael

2015-12-01

Asthma is a complex syndrome with significant consequences for those affected. The number of individuals affected is growing, although the reasons for the increase are uncertain. Ensuring the effective management of potential exposures follows from substantial evidence that exposure to some chemicals can increase the likelihood of asthma responses. We have developed a safety assessment approach tailored to the screening of asthma risks from residential consumer product ingredients as a proactive risk management tool. Several key features of the proposed approach advance the assessment resources often used for asthma issues. First, a quantitative health benchmark for asthma or related endpoints (irritation and sensitization) is provided that extends qualitative hazard classification methods. Second, a parallel structure is employed to include dose-response methods for asthma endpoints and methods for scenario specific exposure estimation. The two parallel tracks are integrated in a risk characterization step. Third, a tiered assessment structure is provided to accommodate different amounts of data for both the dose-response assessment (i.e., use of existing benchmarks, hazard banding, or the threshold of toxicological concern) and exposure estimation (i.e., use of empirical data, model estimates, or exposure categories). Tools building from traditional methods and resources have been adapted to address specific issues pertinent to asthma toxicology (e.g., mode-of-action and dose-response features) and the nature of residential consumer product use scenarios (e.g., product use patterns and exposure durations). A case study for acetic acid as used in various sentinel products and residential cleaning scenarios was developed to test the safety assessment methodology. In particular, the results were used to refine and verify relationships among tiered approaches such that each lower data tier in the approach provides a similar or greater margin of safety for a given

Exposure assessment of workers in printed electronics workplace.

Science.gov (United States)

Lee, Ji Hyun; Sohn, Eun Kyung; Ahn, Jin Soo; Ahn, Kangho; Kim, Keun Soo; Lee, Jong Hwan; Lee, Taik Min; Yu, Il Je

2013-07-01

Printed electronics uses converging technologies, such as printing, fine mechanics, nanotechnology, electronics and other new technologies. Consequently, printed electronics raises additional health and safety concerns to those experienced in the traditional printing industry. This study investigated two printed electronics workplaces based on a walk-through survey and personal and area sampling. All the printed electronics operations were conducted in a cleanroom. No indication of exposure to excess silver nanoparticles or carbon nanotubes (CNTs) was found. While the organic solvents were lower than current occupational exposure limits, there was a lack of engineering controls, such as local exhaust ventilation, correct enclosure and duct connections. There was also an insufficient quantity of personal protective equipment, and some organic solvents not described in the safety data sheets (SDSs) were detected in the air samples. Plus, the cleaning work, a major emissions operation, was not conducted within a hood, and the cleaning waste was not properly disposed of. Therefore, the present exposure assessment results from two printed electronics workplaces suggest that the printed electronics industry needs to take note of the occupational safety and health risks and hazards already established by the traditional printing industry, along with new risks and hazards originating from converging technologies such as nanotechnology.

Major national human biomonitoring programs in chemical exposure assessment

Directory of Open Access Journals (Sweden)

Judy Choi

2015-07-01

Full Text Available Human biomonitoring (HBM programs have been established in several countries around the world in order to monitor the levels of chemical exposures in the general population and qualify health risk assessment of national and international interest. Study design, population, sample collection, and chemical analysis must be considered when comparing and interpreting the results. In this review, the objectives and brief descriptions of the major national HBM programs in North America, Europe, and Asia are provided. Similarities and differences observed from a comparative analysis among these programs, including the stratification of data according to age, sex, socioeconomic background, etc. as well as the identification of chemical exposure associated with food intake, are discussed. Overall, although there are some discrepancies in the study designs among the reviewed national HBM programs, results from the programs can provide useful information such as chemical levels found within the general population of a country that can be compared. Furthermore, the results can be used by regulatory authorities or the government to enforce legislations in order to reduce the exposure of chemicals into the human body.

Scientific Opinion on outline proposals for assessment of exposure of organisms to substances in soil

DEFF Research Database (Denmark)

Petersen, Annette

2010-01-01

appropriate for both conventional and reduced tillage in multi-year exposure calculations. The Panel proposes a tiered exposure assessment approach with four tiers. Tier 1 consists of a simple analytical model. Tier 2 consists of three scenarios (one for each of the three regulatory zones) that can be used...... for any annual crop in a zone. In Tiers 3 and 4, the exposure assessment can be refined considering the specific crops and/or substances with specific properties. The Panel proposes to develop guidance for estimating the degradation rate within the soil matrix from field persistence studies...

Predictive models for the assessment of occupational exposure to chemicals: A new challenge for employers

Directory of Open Access Journals (Sweden)

Jan Piotr Gromiec

2013-10-01

Full Text Available Employers are obliged to carry out and document the risk associated with the use of chemical substances. The best but the most expensive method is to measure workplace concentrations of chemicals. At present no "measureless" method for risk assessment is available in Poland, but predictive models for such assessments have been developed in some countries. The purpose of this work is to review and evaluate the applicability of selected predictive methods for assessing occupational inhalation exposure and related risk to check the compliance with Occupational Exposure Limits (OELs, as well as the compliance with REACH obligations. Based on the literature data HSE COSHH Essentials, EASE, ECETOC TRA, Stoffenmanager, and EMKG-Expo-Tool were evaluated. The data on validation of predictive models were also examined. It seems that predictive models may be used as a useful method for Tier 1 assessment of occupational exposure by inhalation. Since the levels of exposure are frequently overestimated, they should be considered as "rational worst cases" for selection of proper control measures. Bearing in mind that the number of available exposure scenarios and PROC categories is limited, further validation by field surveys is highly recommended. Predictive models may serve as a good tool for preliminary risk assessment and selection of the most appropriate risk control measures in Polish small and medium size enterprises (SMEs providing that they are available in the Polish language. This also requires an extensive training of their future users. Med Pr 2013;64(5:699–716

Risk assessment of welders` exposure to total fume in an automobile industry

Directory of Open Access Journals (Sweden)

2012-01-01

Full Text Available Introduction: Risk assessment of Toxic or hazardous chemicals enables the Industrial Hygienists to make the appropriate decision in providing healthy work place. This project was conducted in an assembling plant,(4workshop of an Automobile Industry in IRAN with 2 types of welding operations, including GMAW (CO2 welding and Spot resistance welding operations. . Method and Materials: Welders` exposures were assessed via collecting 143 breathing zone air samples based on NIOSH 0500 method. Risk assessment was carried out using Singapore recommended method. .Results: Finding showed that the mean of welders exposure in GMAW and Spot resistance welding operations 5.61 ± 5.78and 2.38± 2.15 mg/m3, respectively(p<0.05. The results showed that in GMAW welders had the highe exposure in comparison with Spot resistance welders (p<0.05. The findings also demonstrated that the risk rate of GMAW welders were high, while this rate for Spot resistance was low. .Conclusion: more hygienic attention is needed for GTAW welders. Control approaches are required including effective engineering control, conduct air monitoring, biological monitoring training, adopt respiratory protection program, develop and implement safe and correct work procedures and finally reassess the risk after all the controls have been done.

Radiation exposure and risk assessment for critical female body organs

International Nuclear Information System (INIS)

Atwell, W.; Weyland, M.D.; Hardy, A.C.

1991-07-01

Space radiation exposure limits for astronauts are based on recommendations of the National Council on Radiation Protection and Measurements. These limits now include the age at exposure and sex of the astronaut. A recently-developed computerized anatomical female (CAF) model is discussed in detail. Computer-generated, cross-sectional data are presented to illustrate the completeness of the CAF model. By applying ray-tracing techniques, shield distribution functions have been computed to calculate absorbed dose and dose equivalent values for a variety of critical body organs (e.g., breasts, lungs, thyroid gland, etc.) and mission scenarios. Specific risk assessments, i.e., cancer induction and mortality, are reviewed. 13 refs

Assessment of exposure to chemical agents and ergonomic stressors in tanneries in Kanpur, India.

Science.gov (United States)

Ory, F G; Rahman, F U; Katagade, V; Shukla, A; Burdorf, A

1997-10-01

In developing countries qualitative assessment of exposure at the workplace may be an essential tool in evaluating hazardous working conditions. This survey reports on qualitative assessment of exposure to chemicals, dust, and ergonomic stressors among 298 workers in 15 tanneries in Kanpur, India. In general, chemical exposure and dermal exposure were highest among beamhouse workers, less for workers involved in dry finishing activities, and lowest for those performing the wet finishing of hides. Dermal exposure was rated as high to very high during beamhouse activities, reflecting direct contact with wet hides and manual handling of hides in soak tanks. Relevant dust exposure was observed only during dry finishing activities. Most workers experienced severe postural load due to working in trunk flexion and rotation for more than 50% of their daily work time. In addition, manual materials handling with loads over 20 kg frequently occurred. The size of the tannery, in general a reflection of state of technology, showed no systematic influence on exposure profiles. The survey suggested that mechanization of material transfer and application of trolleys reduced the work time with trunk flexion and rotation and implied less manual lifting. The presence of local exhaust ventilation in large tanneries seemed to reduce the chemical exposure. This survey has demonstrated the importance of rapid appraisal techniques for evaluating hazardous conditions at the workplace. In developing countries this approach may facilitate occupational hygiene research and practice.

Deoxynivalenol Exposure in Norway, Risk Assessments for Different Human Age Groups

Science.gov (United States)

Sundheim, Leif; Lillegaard, Inger Therese; Fæste, Christiane Kruse; Brantsæter, Anne-Lise; Brodal, Guro; Eriksen, Gunnar Sundstøl

2017-01-01

Deoxynivalenol (DON) is the most common mycotoxin in Norwegian cereals, and DON is detected in most samples of crude cereal grain and cereal food commodities such as flour, bran, and oat flakes. The Norwegian Scientific Committee for Food Safety assessed the risk for adverse effects of deoxynivalenol (DON) in different age groups of the domestic population. This review presents the main results from the risk assessment, supplemented with some recently published data. Impairment of the immune system together with reduced feed intake and weight gain are the critical effects of DON in experimental animals on which the current tolerable daily intake was established. Based on food consumption and occurrence data, the mean exposure to DON in years with low and high levels of DON in the flour, respectively, were in the range of or up to two times the Tolerable Daily Intake (TDI) in 1-year-old infants and 2-year-old children. In years with high mean DON concentration, the high (95th-percentile) exposure exceeded the TDI by up to 3.5 times in 1-, 2- , 4-, and 9-year-old children. The assessment concluded that exceeding the TDI in infants and children is of concern. The estimated dietary DON intakes in adolescent and adult populations are in the range of the TDI or below, and are not a health concern. Acute human exposure to DON is not of concern in any age group. PMID:28165414

Deoxynivalenol Exposure in Norway, Risk Assessments for Different Human Age Groups

Directory of Open Access Journals (Sweden)

Leif Sundheim

2017-02-01

Full Text Available Deoxynivalenol (DON is the most common mycotoxin in Norwegian cereals, and DON is detected in most samples of crude cereal grain and cereal food commodities such as flour, bran, and oat flakes. The Norwegian Scientific Committee for Food Safety assessed the risk for adverse effects of deoxynivalenol (DON in different age groups of the domestic population. This review presents the main results from the risk assessment, supplemented with some recently published data. Impairment of the immune system together with reduced feed intake and weight gain are the critical effects of DON in experimental animals on which the current tolerable daily intake was established. Based on food consumption and occurrence data, the mean exposure to DON in years with low and high levels of DON in the flour, respectively, were in the range of or up to two times the Tolerable Daily Intake (TDI in 1-year-old infants and 2-year-old children. In years with high mean DON concentration, the high (95th-percentile exposure exceeded the TDI by up to 3.5 times in 1-, 2- , 4-, and 9-year-old children. The assessment concluded that exceeding the TDI in infants and children is of concern. The estimated dietary DON intakes in adolescent and adult populations are in the range of the TDI or below, and are not a health concern. Acute human exposure to DON is not of concern in any age group.

Evaluation of three physiologically based pharmacokinetic (PBPK) modeling tools for emergency risk assessment after acute dichloromethane exposure

NARCIS (Netherlands)

Boerleider, R. Z.; Olie, J. D N; van Eijkeren, J. C H; Bos, P. M J; Hof, B. G H; de Vries, I.; Bessems, J. G M; Meulenbelt, J.; Hunault, C. C.

2015-01-01

Introduction: Physiologically based pharmacokinetic (PBPK) models may be useful in emergency risk assessment, after acute exposure to chemicals, such as dichloromethane (DCM). We evaluated the applicability of three PBPK models for human risk assessment following a single exposure to DCM: one model

Assessing Patient Participation in Health Policy Decision-Making in Cyprus

Directory of Open Access Journals (Sweden)

Kyriakos Souliotis

2016-08-01

Full Text Available Although the importance of patient participation in the design and evaluation of health programs and services is well-documented, there is scarcity of research with regard to patient association (PA participation in health policy decision-making processes. To this end, the present study aimed to validate further a previously developed instrument as well as to investigate the degree of PA participation in health policy decision-making in Cyprus. A convenient sample of 114 patients-members of patients associations took part in the study. Participants were recruited from an umbrella organization, the Pancyprian Federation of Patient Associations and Friends (PFPA. PA participation in health policy decision-making was assessed with the Health Democracy Index (HDI, an original 8-item tool. To explore its psychometric properties, Cronbach α was computed as regards to its internal consistency, while its convergent validity was tested against a self-rated question enquiring about the degree of PA participation in health policy decision-making. The findings revealed that the HDI has good internal consistency and convergent validity. Furthermore, PAs were found to participate more in consultations in health-related organizations and the Ministry of Health (MoH as well as in reforms or crucial decisions in health policy. Lower levels were documented with regard to participation in hospital boards, ethics committees in clinical trials and health technology assessment (HTA procedures. Overall, PA participation levels were found to be lower than the mid-point of the scale. Targeted interventions aiming to facilitate patients’ involvement in health policy decision-making processes and to increase its impact are greatly needed in Cyprus.

Assessing Patient Participation in Health Policy Decision-Making in Cyprus.

Science.gov (United States)

Souliotis, Kyriakos; Agapidaki, Eirini; Peppou, Lily Evangelia; Tzavara, Chara; Samoutis, George; Theodorou, Mamas

2016-06-20

Although the importance of patient participation in the design and evaluation of health programs and services is well-documented, there is scarcity of research with regard to patient association (PA) participation in health policy decision-making processes. To this end, the present study aimed to validate further a previously developed instrument as well as to investigate the degree of PA participation in health policy decision-making in Cyprus. A convenient sample of 114 patients-members of patients associations took part in the study. Participants were recruited from an umbrella organization, the Pancyprian Federation of Patient Associations and Friends (PFPA). PA participation in health policy decision-making was assessed with the Health Democracy Index (HDI), an original 8-item tool. To explore its psychometric properties, Cronbach α was computed as regards to its internal consistency, while its convergent validity was tested against a self-rated question enquiring about the degree of PA participation in health policy decision-making. The findings revealed that the HDI has good internal consistency and convergent validity. Furthermore, PAs were found to participate more in consultations in health-related organizations and the Ministry of Health (MoH) as well as in reforms or crucial decisions in health policy. Lower levels were documented with regard to participation in hospital boards, ethics committees in clinical trials and health technology assessment (HTA) procedures. Overall, PA participation levels were found to be lower than the mid-point of the scale. Targeted interventions aiming to facilitate patients' involvement in health policy decision-making processes and to increase its impact are greatly needed in Cyprus. © 2016 by Kerman University of Medical Sciences.

Estimating human exposure to perfluoroalkyl acids via solid food and drinks : Implementation and comparison of different dietary assessment methods

NARCIS (Netherlands)

Papadopoulou, Eleni; Poothong, Somrutai; Koekkoek, Jacco; Lucattini, Luisa; Padilla-Sánchez, Juan Antonio; Haugen, Margaretha; Herzke, Dorte; Valdersnes, Stig; Maage, Amund; Cousins, Ian T.; Leonards, Pim E.G.; Småstuen Haug, Line

2017-01-01

Background Diet is a major source of human exposure to hazardous environmental chemicals, including many perfluoroalkyl acids (PFAAs). Several assessment methods of dietary exposure to PFAAs have been used previously, but there is a lack of comparisons between methods. Aim To assess human exposure

Radiation exposure assessment using cytological and molecular biomarkers

Energy Technology Data Exchange (ETDEWEB)

Blakely, W.F

2001-07-01

Chromosome aberration analysis is the conventional means of assessing radiation exposure. The Armed Forces Radiobiological Research Institute recently established an alternative method to measure radiation-induced chromosome aberrations in interphase cells. The method uses commercially available chemical agents to induce premature chromosome condensation in 'resting' G{sub 0} human peripheral blood lymphocytes. Then specific whole-chromosome DNA probes are used with fluorescence in situ hybridisation to detect aberrant cells rapidly over a broad dose range. In new research, the real-time fluorogenic 5'-nuclease, or TaqMan{sup TM}, polymerase chain reaction assay is being used to identify radiation-responsive molecular biomarkers, including gene expression targets and DNA mutations. The goal is to establish rapid, precise, high-throughput assay systems that are practical in a variety of radiation exposure scenarios. The new methodologies that have a number of other applications, together with diagnostic software now in development, could improve the United States military's emergency response capability and medical readiness. (author)

Biomonitoring of the mycotoxin Zearalenone: current state-of-the art and application to human exposure assessment.

Science.gov (United States)

Mally, Angela; Solfrizzo, Michele; Degen, Gisela H

2016-06-01

Zearalenone (ZEN), a mycotoxin with high estrogenic activity in vitro and in vivo, is a widespread food contaminant that is commonly detected in maize, wheat, barley, sorghum, rye and other grains. Human exposure estimates based on analytical data on ZEN occurrence in various food categories and food consumption data suggest that human exposure to ZEN and modified forms of ZEN may be close to or even exceed the tolerable daily intake (TDI) derived by the European Food Safety Authority (EFSA) for some consumer groups. Considering the inherent uncertainties in estimating dietary intake of ZEN that may lead to an under- or overestimation of ZEN exposure and consequently human risk and current lack of data on vulnerable consumer groups, there is a clear need for more comprehensive and reliable exposure data to refine ZEN risk assessment. Human biomonitoring (HBM) is increasingly being recognized as an efficient and cost-effective way of assessing human exposure to food contaminants, including mycotoxins. Based on animal and (limited) human data on the toxicokinetics of ZEN, it appears that excretion of ZEN and its major metabolites may present suitable biomarkers of ZEN exposure. In view of the limitations of available dietary exposure data on ZEN and its modified forms, the purpose of this review is to provide an overview of recent studies utilizing HBM to monitor and assess human exposure to ZEN. Considerations are given to animal and human toxicokinetic data relevant to HBM, analytical methods, and available HBM data on urinary biomarkers of ZEN exposure in different cohorts.

A probabilistic assessment of health risks associated with short-term exposure to tropospheric ozone

Energy Technology Data Exchange (ETDEWEB)

Whitfield, R.G; Biller, W.F.; Jusko, M.J.; Keisler, J.M.

1996-06-01

The work described in this report is part of a larger risk assessment sponsored by the U.S. Environmental Protection Agency. Earlier efforts developed exposure-response relationships for acute health effects among populations engaged in heavy exertion. Those efforts also developed a probabilistic national ambient air quality standards exposure model and a general methodology for integrating probabilistic exposure-response relation- ships and exposure estimates to calculate overall risk results. Recently published data make it possible to model additional health endpoints (for exposure at moderate exertion), including hospital admissions. New air quality and exposure estimates for alternative national ambient air quality standards for ozone are combined with exposure-response models to produce the risk results for hospital admissions and acute health effects. Sample results explain the methodology and introduce risk output formats.

Young adult non-smokers' exposure to real-world tobacco marketing: results of an ecological momentary assessment pilot study.

Science.gov (United States)

Rose, Shyanika W; Anesetti-Rothermel, Andrew; Elmasry, Hoda; Niaura, Ray

2017-08-31

The aims of this pilot study were to assess and characterize non-current smoking young adults' exposure to tobacco marketing through an ecological momentary assessment protocol. Ecological momentary assessment (EMA) consists of repeated measurement of momentary phenomena and is well-suited to capture sporadic experiences in the real-world, such as exposure to tobacco marketing. EMA has the potential to capture detailed information about real-world marketing exposures in ways that reduce recall bias and increase ecological validity. In this study, young adults (n = 31; ages 18-25) responded to random prompts regarding their momentary exposure to tobacco marketing via text messages on their smartphones for 14 days (n = 1798 observations). Unadjusted and adjusted analyses were conducted using multilevel logistic regression to assess the odds of exposure accounting for correlation of multiple repeated measures within individuals while controlling for variability between individuals. Respondents reported, on average, two momentary exposures to tobacco advertising in the 14-day study period. In adjusted analyses, African-American (aOR 3.36; 95% CI 1.07, 10.54) and Hispanic respondents (aOR 5.08; 95% CI 1.28, 20.13) were more likely to report exposure to tobacco advertising. Respondents were also more likely to report exposure when also exposed to others using tobacco products and when they were at stores compared with at home (aOR 14.82; 95% CI 3.61, 60.88). Non-smoking young adults report exposure to tobacco marketing particularly at the point-of-sale, with the highest likelihood of exposure among African-American and Hispanic young people. EMA protocols can be effective in assessing the potential impact of point-of-sale tobacco marketing on young adults.

Probabilistic integrated risk assessment of human exposure risk to environmental bisphenol A pollution sources.

Science.gov (United States)

Fu, Keng-Yen; Cheng, Yi-Hsien; Chio, Chia-Pin; Liao, Chung-Min

2016-10-01

Environmental bisphenol A (BPA) exposure has been linked to a variety of adverse health effects such as developmental and reproductive issues. However, establishing a clear association between BPA and the likelihood of human health is complex yet fundamentally uncertain. The purpose of this study was to assess the potential exposure risks from environmental BPA among Chinese population based on five human health outcomes, namely immune response, uterotrophic assay, cardiovascular disease (CVD), diabetes, and behavior change. We addressed these health concerns by using a stochastic integrated risk assessment approach. The BPA dose-dependent likelihood of effects was reconstructed by a series of Hill models based on animal models or epidemiological data. We developed a physiologically based pharmacokinetic (PBPK) model that allows estimation of urinary BPA concentration from external exposures. Here we showed that the daily average exposure concentrations of BPA and urinary BPA estimates were consistent with the published data. We found that BPA exposures were less likely to pose significant risks for infants (0-1 year) and adults (male and female >20 years) with human long-term BPA susceptibility in relation to multiple exposure pathways, and for informing the public of the negligible magnitude of environmental BPA pollution impacts on human health.

An accurate filter loading correction is essential for assessing personal exposure to black carbon using an Aethalometer.

Science.gov (United States)

Good, Nicholas; Mölter, Anna; Peel, Jennifer L; Volckens, John

2017-07-01

The AE51 micro-Aethalometer (microAeth) is a popular and useful tool for assessing personal exposure to particulate black carbon (BC). However, few users of the AE51 are aware that its measurements are biased low (by up to 70%) due to the accumulation of BC on the filter substrate over time; previous studies of personal black carbon exposure are likely to have suffered from this bias. Although methods to correct for bias in micro-Aethalometer measurements of particulate black carbon have been proposed, these methods have not been verified in the context of personal exposure assessment. Here, five Aethalometer loading correction equations based on published methods were evaluated. Laboratory-generated aerosols of varying black carbon content (ammonium sulfate, Aquadag and NIST diesel particulate matter) were used to assess the performance of these methods. Filters from a personal exposure assessment study were also analyzed to determine how the correction methods performed for real-world samples. Standard correction equations produced correction factors with root mean square errors of 0.10 to 0.13 and mean bias within ±0.10. An optimized correction equation is also presented, along with sampling recommendations for minimizing bias when assessing personal exposure to BC using the AE51 micro-Aethalometer.

The Future of Exposure Assessment: Perspectives from the X2012 Conference

Science.gov (United States)

The British Occupational Hygiene Society, in collaboration with the Institute of Occupational Medicine, the University of Manchester, the UK Health and Safety Executive, and the University of Aberdeen hosted the 7th International Conference on the Science of Exposure Assessment (...

Assessment of Exposure to VOCs among Pregnant Women in the National Children's Study.

Science.gov (United States)

Boyle, Elizabeth Barksdale; Viet, Susan M; Wright, David J; Merrill, Lori S; Alwis, K Udeni; Blount, Benjamin C; Mortensen, Mary E; Moye, John; Dellarco, Michael

2016-03-29

Epidemiologic studies can measure exposure to volatile organic compounds (VOCs) using environmental samples, biomarkers, questionnaires, or observations. These different exposure assessment approaches each have advantages and disadvantages; thus, evaluating relationships is an important consideration. In the National Children's Vanguard Study from 2009 to 2010, participants completed questionnaires and data collectors observed VOC exposure sources and collected urine samples from 488 third trimester pregnant women at in-person study visits. From urine, we simultaneously quantified 28 VOC metabolites of exposure to acrolein, acrylamide, acrylonitrile, benzene, 1-bromopropane, 1,3-butadiene, carbon disulfide, crotonaldehyde, cyanide, N,N-dimethylformamide, ethylbenzene, ethylene oxide, propylene oxide, styrene, tetrachloroethylene, toluene, trichloroethylene, vinyl chloride, and xylene exposures using ultra high performance liquid chromatography coupled with an electrospray ionization tandem mass spectrometry (UPLC-ESI/MSMS) method. Urinary thiocyanate was measured using an ion chromatography coupled with an electrospray ionization tandem mass spectrometry method (IC-ESI/MSMS). We modeled the relationship between urinary VOC metabolite concentrations and sources of VOC exposure. Sources of exposure were assessed by participant report via questionnaire (use of air fresheners, aerosols, paint or varnish, organic solvents, and passive/active smoking) and by observations by a trained data collector (presence of scented products in homes). We found several significant (p < 0.01) relationships between the urinary metabolites of VOCs and sources of VOC exposure. Smoking was positively associated with metabolites of the tobacco constituents acrolein, acrylamide, acrylonitrile, 1,3-butadiene, crotonaldehyde, cyanide, ethylene oxide, N,N-dimethylformamide, propylene oxide, styrene, and xylene. Study location was negatively associated with the toluene metabolite N

Cumulative risk assessment of phthalate exposure of Danish children and adolescents using the hazard index approach

DEFF Research Database (Denmark)

Søeborg, T; Frederiksen, H; Andersson, Anna-Maria

2012-01-01

Human risk assessment of chemicals is traditionally presented as the ratio between the actual level of exposure and an acceptable level of exposure, with the acceptable level of exposure most often being estimated by appropriate authorities. This approach is generally sound when assessing the risk...... of individual chemicals. However, several chemicals may concurrently target the same receptor, work through the same mechanism or in other ways induce the same effect(s) in the body. In these cases, cumulative risk assessment should be applied. The present study uses biomonitoring data from 129 Danish children...... and adolescents and resulting estimated daily intakes of four different phthalates. These daily intake estimates are used for a cumulative risk assessment with anti-androgenic effects as the endpoint using Tolerable Daily Intake (TDI) values determined by the European Food Safety Authorities (EFSA) or Reference...

Mercury contamination and exposure assessment of fishery products in Korea.

Science.gov (United States)

Yang, Hye-Ran; Kim, Na-Young; Hwang, Lae-Hong; Park, Ju-Sung; Kim, Jung-Hun

2015-01-01

In this study, total (T-Hg) and methyl mercury (Me-Hg) contamination was investigated in fishery products including canned fish, fish sauces, dried bonito and frozen tuna sashimi, collected from retail markets in Korea, to assess dietary exposure. Direct mercury analyser and gas chromatography-electron captured detector were employed to measure T-Hg and Me-Hg, respectively. The highest T-Hg and Me-Hg contamination was present in tuna sashimi, followed by dried bonito, respectively. Canned tuna showed more frequent detection and higher content than other canned fishery products. The weekly exposure estimate indicates that exposure to mercury from fishery products is safe, showing 2.59% provisional tolerable weekly intake (PTWI) for T-Hg, 1.82% PTWI for Me-Hg and 4.16% reference dose for Me-Hg. However, it should be addressed to monitor the mercury contamination in fish and fishery products regularly, to safeguard vulnerable population such as children, to limit intake of these food products.

Mercury risk assessment combining internal and external exposure methods for a population living near a municipal solid waste incinerator.

Science.gov (United States)

Deng, Chunyan; Xie, Han; Ye, Xuejie; Zhang, Haoran; Liu, Maodian; Tong, Yindong; Ou, Langbo; Yuan, Wen; Zhang, Wei; Wang, Xuejun

2016-12-01

Risk assessments for human health have been conducted for municipal solid waste incinerators (MSWIs) in many western countries, whereas only a few risk assessments have been performed for MSWIs in developing countries such as China where the use of waste incineration is increasing rapidly. To assess the mercury exposure risks of a population living near the largest MSWI in South China, we combined internal exposure and external exposure assessment with an individual-specific questionnaire. The mercury concentrations in air, soil, and locally collected food around the MSWI were assessed. The total mercury (T-Hg) and methylmercury (MeHg) of 447 blood samples from a control group, residential exposure group, and MSWI workers were measured. The internal and external exposures of the subject population were analyzed. Significant difference in MeHg concentrations was observed between the control group and the exposed group, between the control group and the MSWI workers, and between the exposed group and the MSWI workers (median levels: 0.70 μg/L, 0.81 μg/L, and 1.02 μg/L for the control group, exposed group, and MSWI workers, respectively). The MeHg/T-Hg ratio was 0.51 ± 0.19, 0.59 ± 0.17 and 0.58 ± 0.25, respectively. Multiple linear regression analysis indicated that MeHg concentrations were positively correlated with the gaseous mercury in the air. Combining internal and external exposure assessment showed that the direct contribution of MSWI emissions was minor compared with the dietary contribution. The external and internal exposures were well matched with each other. This study also suggested that an integrated method combining internal and external exposure assessment with an individual-specific questionnaire is feasible to assess the risks for a population living near a MSWI. Copyright © 2016 Elsevier Ltd. All rights reserved.

Assessment of Human Exposures to Natural Sources of Radiation in Kenya

International Nuclear Information System (INIS)

Mustapha, A.O.; Patel, J.P.

1999-01-01

Levels of exposures to different components of natural background radiation in Kenya were assessed from measured data and published conversion factors. Among them, the average annual per capital effective dose from terrestrial external radiation is 0.76 mSv and the annual per capital effective dose from external exposure to cosmic radiation at ground levels is 0.41 mSv. The total average annual effective dose is greater than the global average. Also among the measured data, concentrations of radon ( 222 Rn) vary from 5 to 1200 Bq m -3 in indoor air of dwellings, and from 1 to 410 KBq m -3 in drinking water. An unusual pathway to internal exposure was discovered among the female population who engage in consumption of some earth materials, some of which are rich in thorium

Source attribution of human campylobacteriosis at the point of exposure by combining comparative exposure assessment and subtype comparison based on comparative genomic fingerprinting.

Directory of Open Access Journals (Sweden)

André Ravel

Full Text Available Human campylobacteriosis is a common zoonosis with a significant burden in many countries. Its prevention is difficult because humans can be exposed to Campylobacter through various exposures: foodborne, waterborne or by contact with animals. This study aimed at attributing campylobacteriosis to sources at the point of exposure. It combined comparative exposure assessment and microbial subtype comparison with subtypes defined by comparative genomic fingerprinting (CGF. It used isolates from clinical cases and from eight potential exposure sources (chicken, cattle and pig manure, retail chicken, beef, pork and turkey meat, and surface water collected within a single sentinel site of an integrated surveillance system for enteric pathogens in Canada. Overall, 1518 non-human isolates and 250 isolates from domestically-acquired human cases were subtyped and their subtype profiles analyzed for source attribution using two attribution models modified to include exposure. Exposure values were obtained from a concurrent comparative exposure assessment study undertaken in the same area. Based on CGF profiles, attribution was possible for 198 (79% human cases. Both models provide comparable figures: chicken meat was the most important source (65-69% of attributable cases whereas exposure to cattle (manure ranked second (14-19% of attributable cases, the other sources being minor (including beef meat. In comparison with other attributions conducted at the point of production, the study highlights the fact that Campylobacter transmission from cattle to humans is rarely meat borne, calling for a closer look at local transmission from cattle to prevent campylobacteriosis, in addition to increasing safety along the chicken supply chain.

Source attribution of human campylobacteriosis at the point of exposure by combining comparative exposure assessment and subtype comparison based on comparative genomic fingerprinting.

Science.gov (United States)

Ravel, André; Hurst, Matt; Petrica, Nicoleta; David, Julie; Mutschall, Steven K; Pintar, Katarina; Taboada, Eduardo N; Pollari, Frank

2017-01-01

Human campylobacteriosis is a common zoonosis with a significant burden in many countries. Its prevention is difficult because humans can be exposed to Campylobacter through various exposures: foodborne, waterborne or by contact with animals. This study aimed at attributing campylobacteriosis to sources at the point of exposure. It combined comparative exposure assessment and microbial subtype comparison with subtypes defined by comparative genomic fingerprinting (CGF). It used isolates from clinical cases and from eight potential exposure sources (chicken, cattle and pig manure, retail chicken, beef, pork and turkey meat, and surface water) collected within a single sentinel site of an integrated surveillance system for enteric pathogens in Canada. Overall, 1518 non-human isolates and 250 isolates from domestically-acquired human cases were subtyped and their subtype profiles analyzed for source attribution using two attribution models modified to include exposure. Exposure values were obtained from a concurrent comparative exposure assessment study undertaken in the same area. Based on CGF profiles, attribution was possible for 198 (79%) human cases. Both models provide comparable figures: chicken meat was the most important source (65-69% of attributable cases) whereas exposure to cattle (manure) ranked second (14-19% of attributable cases), the other sources being minor (including beef meat). In comparison with other attributions conducted at the point of production, the study highlights the fact that Campylobacter transmission from cattle to humans is rarely meat borne, calling for a closer look at local transmission from cattle to prevent campylobacteriosis, in addition to increasing safety along the chicken supply chain.

Validity of a traffic air pollutant dispersion model to assess exposure to fine particles.

Science.gov (United States)

Kostrzewa, Aude; Reungoat, Patrice; Raherison, Chantal

2009-08-01

Fine particles (PM(2.5)) are an important component of air pollution. Epidemiological studies have shown health effects due to ambient air particles, particularly allergies in children. Since the main difficulty is to determine exposure to such pollution, traffic air pollutant (TAP) dispersions models have been developed to improve the estimation of individual exposure levels. One such model, the ExTra index, has been validated for nitrogen oxide concentrations but not for other pollutants. The purpose of this study was to assess the validity of the ExTra index to assess PM(2.5) exposure. We compared PM(2.5) concentrations calculated by the ExTra index to reference measures (passive samplers situated under the covered part of the playground), in 15 schools in Bordeaux, in 2000. First, we collected the input data required by the ExTra index: background and local pollution depending on traffic, meteorology and topography. Second, the ExTra index was calculated for each school. Statistical analysis consisted of a graphic description; then, we calculated an intraclass correlation coefficient. Concentrations calculated with the ExTra index and the reference method were similar. The ExTra index underestimated exposure by 2.2 microg m(-3) on average compared to the reference method. The intraclass correlation coefficient was 0.85 and its 95% confidence interval was [0.62; 0.95]. The results suggest that the ExTra index provides an assessment of PM(2.5) exposure similar to that of the reference method. Although caution is required in interpreting these results owing to the small number of sites, the ExTra index could be a useful epidemiological tool for reconstructing individual exposure, an important challenge in epidemiology.

Default values for assessment of potential dermal exposure of the hands to industrial chemicals in the scope of regulatory risk assessments

NARCIS (Netherlands)

Marquart, H.; Warren, N.D.; Laitinen, J.; Hemmen, J.J. van

2006-01-01

Dermal exposure needs to be addressed in regulatory risk assessment of chemicals. The models used so far are based on very limited data. The EU project RISKOFDERM has gathered a large number of new measurements on dermal exposure to industrial chemicals in various work situations, together with

NASA Space Radiation Protection Strategies: Risk Assessment and Permissible Exposure Limits

Science.gov (United States)

Huff, J. L.; Patel, Z. S.; Simonsen, L. C.

2017-01-01

Permissible exposure limits (PELs) for short-term and career astronaut exposures to space radiation have been set and approved by NASA with the goal of protecting astronauts against health risks associated with ionizing radiation exposure. Short term PELs are intended to prevent clinically significant deterministic health effects, including performance decrements, which could threaten astronaut health and jeopardize mission success. Career PELs are implemented to control late occurring health effects, including a 3% risk of exposure induced death (REID) from cancer, and dose limits are used to prevent cardiovascular and central nervous system diseases. For radiation protection, meeting the cancer PEL is currently the design driver for galactic cosmic ray and solar particle event shielding, mission duration, and crew certification (e.g., 1-year ISS missions). The risk of cancer development is the largest known long-term health consequence following radiation exposure, and current estimates for long-term health risks due to cardiovascular diseases are approximately 30% to 40% of the cancer risk for exposures above an estimated threshold (Deep Space one-year and Mars missions). Large uncertainties currently exist in estimating the health risks of space radiation exposure. Improved understanding through radiobiology and physics research allows increased accuracy in risk estimation and is essential for ensuring astronaut health as well as for controlling mission costs, optimization of mission operations, vehicle design, and countermeasure assessment. We will review the Space Radiation Program Element's research strategies to increase accuracy in risk models and to inform development and validation of the permissible exposure limits.

A State-of-the-Art Report on Technologies of a Safety Assessment and a Radioactivity Exposure Assessment for the Decommissioning Process of Nuclear Facilities

International Nuclear Information System (INIS)

Jeong, Kwan Seong; Kang, Young Ae; Lee, Dong Gyu; Lee, Kune Woo; Jung, Chong Hun

2007-09-01

This report is to provide the reference contents of research and development for technologies of radioactivity exposure and safety assessment for development of the decommissioning technology for nuclear facilities. This report consists of as follows: - Analyzing and discussing on state-of-the-art technologies of a radioactivity exposure assessment of a decommissioning for nuclear facilities - Analyzing and discussing on state-of-the-art technologies of a safety assessment of a decommissioning for nuclear facilities

A State-of-the-Art Report on Technologies of a Safety Assessment and a Radioactivity Exposure Assessment for the Decommissioning Process of Nuclear Facilities

Energy Technology Data Exchange (ETDEWEB)

Jeong, Kwan Seong; Kang, Young Ae; Lee, Dong Gyu; Lee, Kune Woo; Jung, Chong Hun

2007-09-15

This report is to provide the reference contents of research and development for technologies of radioactivity exposure and safety assessment for development of the decommissioning technology for nuclear facilities. This report consists of as follows: - Analyzing and discussing on state-of-the-art technologies of a radioactivity exposure assessment of a decommissioning for nuclear facilities - Analyzing and discussing on state-of-the-art technologies of a safety assessment of a decommissioning for nuclear facilities.

Establishment of exposure dose assessment laboratory in National Radiation Emergency Medical Center (NREMC)

Energy Technology Data Exchange (ETDEWEB)

Yoo, Jae Ryong; Ha, Wi Ho; Yoon, Seok Won; Han, Eun Ae; Lee, Seung Sook [Korea Institute of Radiological and Medical Sciences, Seoul (Korea, Republic of)

2011-10-15

As unclear industry grown, 432 of the nuclear power plants are operating and 52 of NPPs are under construction currently. Increasing use of radiation or radioisotopes in the field of industry, medical purpose and research such as non-destructive examination, computed tomography and x-ray, etc. constantly. With use of nuclear or radiation has incidence possibility for example the Fukushima NPP incident, the Goiania accident and the Chernobyl Nuclear accident. Also the risk of terror by radioactive material such as Radiological Dispersal Device(RDD) etc. In Korea, since the 'Law on protection of nuclear facilities and countermeasure for radioactive preparedness was enacted in 2003, the Korean institute of Radiological and Medical Sciences(KIRAMS) was established for the radiation emergency medical response in radiological disaster due to nuclear accident, radioactive terror and so on. Especially National Radiation Emergency Medical Center(NREMC) has the duty that is protect citizens from nuclear, radiological accidents or radiological terrors through the emergency medical preparedness. The NREMC was established by the 39-article law on physical protection of nuclear material and facilities and measures for radiological emergencies. Dose assessment or contamination survey should be performed which provide the radiological information for medical response. For this reason, the NREMC establish and re-organized dose assessment system based on the existing dose assessment system of the NREMC recently. The exposure dose could be measured by physical and biological method. With these two methods, we can have conservative dose assessment result. Therefore the NREMC established the exposure dose assessment laboratory which was re-organized laboratory space and introduced specialized equipment for dose assessment. This paper will report the establishment and operation of exposure dose assessment laboratory for radiological emergency response and discuss how to enhance

Ecological and human exposure assessment to PBDEs in Adige River.

Science.gov (United States)

Giulivo, Monica; Suciu, Nicoleta Alina; Eljarrat, Ethel; Gatti, Marina; Capri, Ettore; Barcelo, Damia

2018-07-01

The interest for environmental issues and the concern resulting from the potential exposure to contaminants were the starting point to develop methodologies in order to evaluate the consequences that those might have over both the environment and human health. Considering the feature of POPs, including PBDEs, such as bioaccumulation, biomagnification, long-range transport and adverse effects even long time after exposure, risk assessment of POPs requires specific approaches and tools. In this particular context, the MERLIN-Expo tool was used to assess the aquatic environmental exposure of Adige River to PBDEs and the accumulation of PBDEs in humans through the consumption of possible contaminated local aquatic food. The aquatic food web models provided as output of the deterministic simulation the time trend of concentrations for twenty years of BDE-47 and total PBDEs, expressed using the physico-chemical properties of BDE-47, in aquatic organisms of the food web of Adige River. For BDE-47, the highest accumulated concentrations were detected for two benthic species: Thymallus thymallus and Squalius cephalus whereas the lowest concentrations were obtained for the pelagic specie Salmo trutta marmoratus. The trend obtained for the total PBDEs, calculated using the physico-chemical properties of BDE-47, follows the one of BDE-47. For human exposure, different BDE-47 and total PBDEs concentration trends between children, adolescent, adults and elderly were observed, probably correlated with the human intake of fish products in the daily diet and the ability to metabolize these contaminants. In detail, for the adolescents, adults and elderly a continuous accumulation of the target contaminants during the simulation's years was observed, whereas for children a plateau at the end of the simulation period was perceived. Copyright © 2018 Elsevier Inc. All rights reserved.

Indoor human exposure to size-fractionated aerosols during the 2015 Southeast Asian smoke haze and assessment of exposure mitigation strategies

Science.gov (United States)

Sharma, Ruchi; Balasubramanian, Rajasekhar

2017-11-01

The 2015 smoke haze episode was one of the most severe and prolonged transboundary air pollution events ever seen in Southeast Asia (SEA), affecting the air quality of several countries within the region including Indonesia, Malaysia and Singapore. The 24 h mean outdoor PM2.5 (particulate matter (PM) with aerodynamic diameter ≤ 2.5 μm) concentrations ranged from 72-157 μg m-3 in Singapore during this episode, exceeding the WHO 24 h mean PM2.5 guidelines (25 μg m-3) several times over. The smoke haze episode not only affected ambient air quality, but also indoor air quality due to the migration of PM of different sizes from the outdoor to the indoor environment. Despite the frequent occurrence of smoke haze episodes over the years, their potential health impacts on indoor building occupants remain largely unknown in SEA due to the lack of systematic investigations and observational data. The current work was carried out in Singapore to assess human exposure to size-resolved PM during the 2015 smoke haze episode, and to evaluate the effectiveness of exposure mitigation measures in smoke-haze-impacted naturally ventilated indoor environments. The potential health risks associated with exposure to PM2.5 were assessed based on the concentrations of redox active particulate-bound trace elements, which are known to be harmful to human health, with and without exposure mitigation. Overall, it was observed that human health exposure to PM2.5 and its carcinogenic chemical components was reduced substantially by 62% (p health.

Particle size: a missing factor in risk assessment of human exposure to toxic chemicals in settled indoor dust.

Science.gov (United States)

Cao, Zhi-Guo; Yu, Gang; Chen, Yong-Shan; Cao, Qi-Ming; Fiedler, Heidelore; Deng, Shu-Bo; Huang, Jun; Wang, Bin

2012-11-15

For researches on toxic chemicals in settled indoor dust, selection of dust fraction is a critical influencing factor to the accuracy of human exposure risk assessment results. However, analysis of the selection of dust fraction in recent studies revealed that there is no consensus. This study classified and presented researches on distribution of toxic chemicals according to dust particle size and on relationship between dust particle size and human exposure possibility. According to the literature, beyond the fact that there were no consistent conclusions on particle size distribution of adherent fraction, dust with particle size less than 100 μm should be paid more attention and that larger than 250 μm is neither adherent nor proper for human exposure risk assessment. Calculation results based on literature data show that with different selections of dust fractions, analytical results of toxic chemicals would vary up to 10-fold, which means that selecting dust fractions arbitrarily will lead to large errors in risk assessment of human exposure to toxic chemicals in settled dust. Taking into account the influence of dust particle size on risk assessment of human exposure to toxic chemicals, a new methodology for risk assessment of human exposure to toxic chemicals in settled indoor dust is proposed and human exposure parameter systems to settled indoor dust are advised to be established at national and regional scales all over the world. Copyright © 2012 Elsevier Ltd. All rights reserved.

Assessing exposure to violence using multiple informants: application of hierarchical linear model.

Science.gov (United States)

Kuo, M; Mohler, B; Raudenbush, S L; Earls, F J

2000-11-01

The present study assesses the effects of demographic risk factors on children's exposure to violence (ETV) and how these effects vary by informants. Data on exposure to violence of 9-, 12-, and 15-year-olds were collected from both child participants (N = 1880) and parents (N = 1776), as part of the assessment of the Project on Human Development in Chicago Neighborhoods (PHDCN). A two-level hierarchical linear model (HLM) with multivariate outcomes was employed to analyze information obtained from these two different groups of informants. The findings indicate that parents generally report less ETV than do their children and that associations of age, gender, and parent education with ETV are stronger in the self-reports than in the parent reports. The findings support a multivariate approach when information obtained from different sources is being integrated. The application of HLM allows an assessment of interactions between risk factors and informants and uses all available data, including data from one informant when data from the other informant is missing.

Risk assessment of exposure to volatile organic compounds in groundwater in Taiwan

Energy Technology Data Exchange (ETDEWEB)

Fan Chihhao [Department of Safety, Health, and Environmental Engineering, Mingchi University of Technology, Taipei County, Taiwan (China); Wang, G.-S. [Department of Public Health, National Taiwan University, Taipei, Taiwan (China); Chen, Y.-C. [Energy and Environment Research Laboratories, Industrial Technology Research Institute, Hsinchu County, Taiwan (China); Ko, C.-H. [School of Forest and Resources Conservation, National Taiwan University, Taipei, Taiwan (China)], E-mail: chunhank@ntu.edu.tw

2009-03-15

The purpose of this study is to assess the risks from exposure to 14 volatile organic compounds (VOCs) in selected groundwater sites in Taiwan. The study employs the multimedia environment pollutant assessment system (MEPAS) model to calculate the specific non-cancer and cancer risks at an exposure level of 1 {mu}g/L of each VOC for a variety of exposure pathways. The results show that the highest specific non-cancer risk is associated with water ingestion of vinyl chloride (VC) and that the highest specific cancer risk is associated with indoor breathing of VC. The three most important exposure pathways for risk assessment for both non-cancer and cancer risks are identified as water ingestion, dermal absorption when showering, and indoor breathing. Excess tetrachloroethylene (PCE), trichloroethylene (TCE), dichloroethylene (DCE), and VC are detected in the groundwater aquifers of one dump site and one factory. However, the study suggests that the pollutants in the contaminated groundwater aquifers do not travel extensively with groundwater flow and that the resulting VOC concentrations are below detectable levels for most of the sampled drinking-water treatment plants. Nevertheless, the non-cancer and cancer risks resulting from use of the contaminated groundwater are found to be hundred times higher than the general risk guidance values. To ensure safe groundwater utilisation, remediation initiatives for soil and groundwater are required. Finally, the study suggests that the current criteria for VOCs in drinking water might not be capable of ensuring public safety when groundwater is used as the primary water supply; more stringent quality criteria for drinking water are proposed for selected VOCs.

Assessment of dust sampling methods for the study of cultivable-microorganism exposure in stables.

NARCIS (Netherlands)

Normand, A.C.; Vacheyrou, M.; Sudre, B.; Heederik, D.|info:eu-repo/dai/nl/072910542; Piarroux, R.

2009-01-01

Studies have shown a link between living on a farm, exposure to microbial components (e.g., endotoxins or beta-d-glucans), and a lower risk for allergic diseases and asthma. Due to the lack of validated sampling methods, studies of asthma and atopy have not relied on exposure assessment based on

The incidence and mortality of ovarian cancer and their relationship with the Human Development Index in Asia

OpenAIRE

Razi, Saeid; Ghoncheh, Mahshid; Mohammadian-Hafshejani, Abdollah; Aziznejhad, Hojjat; Mohammadian, Mahdi; Salehiniya, Hamid

2016-01-01

Background The incidence and mortality estimates of ovarian cancer based on human development are essential for planning by policy makers. This study is aimed at investigating the standardised incidence rates (SIR) and standardised mortality rates (SMR) of ovarian cancer and their relationship with the Human Development Index (HDI) in Asian countries. Methods This study was an ecologic study in Asia for assessment of the correlation between SIR, age standardised rates (ASR), and HDI and their...

Aquatic exposures of chemical mixtures in urban environments: Approaches to impact assessment.

Science.gov (United States)

de Zwart, Dick; Adams, William; Galay Burgos, Malyka; Hollender, Juliane; Junghans, Marion; Merrington, Graham; Muir, Derek; Parkerton, Thomas; De Schamphelaere, Karel A C; Whale, Graham; Williams, Richard

2018-03-01

Urban regions of the world are expanding rapidly, placing additional stress on water resources. Urban water bodies serve many purposes, from washing and sources of drinking water to transport and conduits for storm drainage and effluent discharge. These water bodies receive chemical emissions arising from either single or multiple point sources, diffuse sources which can be continuous, intermittent, or seasonal. Thus, aquatic organisms in these water bodies are exposed to temporally and compositionally variable mixtures. We have delineated source-specific signatures of these mixtures for diffuse urban runoff and urban point source exposure scenarios to support risk assessment and management of these mixtures. The first step in a tiered approach to assessing chemical exposure has been developed based on the event mean concentration concept, with chemical concentrations in runoff defined by volumes of water leaving each surface and the chemical exposure mixture profiles for different urban scenarios. Although generalizations can be made about the chemical composition of urban sources and event mean exposure predictions for initial prioritization, such modeling needs to be complemented with biological monitoring data. It is highly unlikely that the current paradigm of routine regulatory chemical monitoring alone will provide a realistic appraisal of urban aquatic chemical mixture exposures. Future consideration is also needed of the role of nonchemical stressors in such highly modified urban water bodies. Environ Toxicol Chem 2018;37:703-714. © 2017 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals, Inc. on behalf of SETAC. © 2017 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals, Inc. on behalf of SETAC.

Assessing traumatic event exposure: general issues and preliminary findings for the Stressful Life Events Screening Questionnaire.

Science.gov (United States)

Goodman, L A; Corcoran, C; Turner, K; Yuan, N; Green, B L

1998-07-01

This article reviews the psychometric properties of the Stressful Life Events Screening Questionnaire (SLESQ), a recently developed trauma history screening measure, and discusses the complexities involved in assessing trauma exposure. There are relatively few general measures of exposure to a variety of types of traumatic events, and most of those that exist have not been subjected to rigorous psychometric evaluation. The SLESQ showed good test-retest reliability, with a median kappa of .73, adequate convergent validity (with a lengthier interview) with a median kappa of .64, and good discrimination between Criterion A and non-Criterion A events. The discussion addresses some of the challenges of assessing traumatic event exposure along the dimensions of defining traumatic events, assessment methodologies, reporting consistency, and incident validation.

Biological exposure assessment to tetrachloroethylene for workers in the dry cleaning industry

Directory of Open Access Journals (Sweden)

Ashley David L

2008-04-01

Full Text Available Abstract Background The purpose of this study was to assess the feasibility of conducting biological tetrachloroethylene (perchloroethylene, PCE exposure assessments of dry cleaning employees in conjunction with evaluation of possible PCE health effects. Methods Eighteen women from four dry cleaning facilities in southwestern Ohio were monitored in a pilot study of workers with PCE exposure. Personal breathing zone samples were collected from each employee on two consecutive work days. Biological monitoring included a single measurement of PCE in blood and multiple measurements of pre- and post-shift PCE in exhaled breath and trichloroacetic acid (TCA in urine. Results Post-shift PCE in exhaled breath gradually increased throughout the work week. Statistically significant correlations were observed among the exposure indices. Decreases in PCE in exhaled breath and TCA in urine were observed after two days without exposure to PCE. A mixed-effects model identified statistically significant associations between PCE in exhaled breath and airborne PCE time weighted average (TWA after adjusting for a random participant effect and fixed effects of time and body mass index. Conclusion Although comprehensive, our sampling strategy was challenging to implement due to fluctuating work schedules and the number (pre- and post-shift on three consecutive days and multiplicity (air, blood, exhaled breath, and urine of samples collected. PCE in blood is the preferred biological index to monitor exposures, but may make recruitment difficult. PCE TWA sampling is an appropriate surrogate, although more field intensive. Repeated measures of exposure and mixed-effects modeling may be required for future studies due to high within-subject variability. Workers should be monitored over a long enough period of time to allow the use of a lag term.

Alcohol Advertising Exposure Among Middle School-Age Youth: An Assessment Across All Media and Venues.

Science.gov (United States)

Collins, Rebecca L; Martino, Steven C; Kovalchik, Stephanie A; Becker, Kirsten M; Shadel, William G; D'Amico, Elizabeth J

2016-05-01

The purpose of this study was to quantify middle school youth's exposure to alcohol advertisements across media and venues, determine venues of greatest exposure, and identify characteristics of youth who are most exposed. Over a 10-month period in 2013, 589 Los Angeles-area youth ages 11-14 from diverse racial/ethnic backgrounds completed a short paper-and-pencil survey assessing background characteristics and then participated in a 14-day ecological momentary assessment, logging all exposures to alcohol advertisements on handheld computers as they occurred. African American and Hispanic youth were exposed to an average of 4.1 and 3.4 advertisements per day, respectively, nearly two times as many as non-Hispanic White youth, who were exposed to 2.0 advertisements per day. Girls were exposed to 30% more advertisements than boys. Most exposures were to outdoor advertisements, with television advertisements a close second. Exposure to alcohol advertising is frequent among middle school-age youth and may put them at risk for earlier or more frequent underage drinking. Greater restrictions on alcohol advertising outdoors and on television should be considered by regulators and by the alcohol industry and should focus particularly on reducing exposure among minority youth.

CAirTOX, An inter-media transfer model for assessing indirect exposures to hazardous air contaminants

International Nuclear Information System (INIS)

McKone, T.E.

1994-01-01

Risk assessment is a quantitative evaluation of information on potential health hazards of environmental contaminants and the extent of human exposure to these contaminants. As applied to toxic chemical emissions to air, risk assessment involves four interrelated steps. These are (1) determination of source concentrations or emission characteristics, (2) exposure assessment, (3) toxicity assessment, and (4) risk characterization. These steps can be carried out with assistance from analytical models in order to estimate the potential risk associated with existing and future releases. CAirTOX has been developed as a spreadsheet model to assist in making these types of calculations. CAirTOX follows an approach that has been incorporated into the CalTOX model, which was developed for the California Department of Toxic Substances Control, With CAirTOX, we can address how contaminants released to an air basin can lead to contamination of soil, food, surface water, and sediments. The modeling effort includes a multimedia transport and transformation model, exposure scenario models, and efforts to quantify uncertainty in multimedia, multiple-pathway exposure assessments. The capacity to explicitly address uncertainty has been incorporated into the model in two ways. First, the spreadsheet form of the model makes it compatible with Monte-Carlo add-on programs that are available for uncertainty analysis. Second, all model inputs are specified in terms of an arithmetic mean and coefficient of variation so that uncertainty analyses can be carried out

An Exploratory Study: Assessment of Modeled Dioxin Exposure in Ceramic Art Studios (Final Report, 2008)

Science.gov (United States)

EPA announced the availability of the final report, An Exploratory Study: Assessment of Modeled Dioxin Exposure in Ceramic Art Studios. This report investigates the potential dioxin exposure to artists/hobbyists who use ball clay to make pottery and related products. Derm...