Hard facings used in welded joints. Industrial applications

International Nuclear Information System (INIS)

Delair, J.

1998-01-01

In this article, two industrial application cases of special hard facings used in offshore and nuclear fabrications are described into details. These hard facings concern more particularly 1)the heterogeneous joints of a martensitic steel on an ordinary carbon steel 2)the homogeneous joints of a high resistive low alloy carbon steel. (O.M.)

Giant Clams and Rising CO2: Light May Ameliorate Effects of Ocean Acidification on a Solar-Powered Animal.

Directory of Open Access Journals (Sweden)

Sue-Ann Watson

Full Text Available Global climate change and ocean acidification pose a serious threat to marine life. Marine invertebrates are particularly susceptible to ocean acidification, especially highly calcareous taxa such as molluscs, echinoderms and corals. The largest of all bivalve molluscs, giant clams, are already threatened by a variety of local pressures, including overharvesting, and are in decline worldwide. Several giant clam species are listed as 'Vulnerable' on the IUCN Red List of Threatened Species and now climate change and ocean acidification pose an additional threat to their conservation. Unlike most other molluscs, giant clams are 'solar-powered' animals containing photosynthetic algal symbionts suggesting that light could influence the effects of ocean acidification on these vulnerable animals. In this study, juvenile fluted giant clams Tridacna squamosa were exposed to three levels of carbon dioxide (CO2 (control ~400, mid ~650 and high ~950 μatm and light (photosynthetically active radiation 35, 65 and 304 μmol photons m-2 s-1. Elevated CO2 projected for the end of this century (~650 and ~950 μatm reduced giant clam survival and growth at mid-light levels. However, effects of CO2 on survival were absent at high-light, with 100% survival across all CO2 levels. Effects of CO2 on growth of surviving clams were lessened, but not removed, at high-light levels. Shell growth and total animal mass gain were still reduced at high-CO2. This study demonstrates the potential for light to alleviate effects of ocean acidification on survival and growth in a threatened calcareous marine invertebrate. Managing water quality (e.g. turbidity and sedimentation in coastal areas to maintain water clarity may help ameliorate some negative effects of ocean acidification on giant clams and potentially other solar-powered calcifiers, such as hard corals.

Giant Clams and Rising CO2: Light May Ameliorate Effects of Ocean Acidification on a Solar-Powered Animal.

Science.gov (United States)

Watson, Sue-Ann

2015-01-01

Global climate change and ocean acidification pose a serious threat to marine life. Marine invertebrates are particularly susceptible to ocean acidification, especially highly calcareous taxa such as molluscs, echinoderms and corals. The largest of all bivalve molluscs, giant clams, are already threatened by a variety of local pressures, including overharvesting, and are in decline worldwide. Several giant clam species are listed as 'Vulnerable' on the IUCN Red List of Threatened Species and now climate change and ocean acidification pose an additional threat to their conservation. Unlike most other molluscs, giant clams are 'solar-powered' animals containing photosynthetic algal symbionts suggesting that light could influence the effects of ocean acidification on these vulnerable animals. In this study, juvenile fluted giant clams Tridacna squamosa were exposed to three levels of carbon dioxide (CO2) (control ~400, mid ~650 and high ~950 μatm) and light (photosynthetically active radiation 35, 65 and 304 μmol photons m-2 s-1). Elevated CO2 projected for the end of this century (~650 and ~950 μatm) reduced giant clam survival and growth at mid-light levels. However, effects of CO2 on survival were absent at high-light, with 100% survival across all CO2 levels. Effects of CO2 on growth of surviving clams were lessened, but not removed, at high-light levels. Shell growth and total animal mass gain were still reduced at high-CO2. This study demonstrates the potential for light to alleviate effects of ocean acidification on survival and growth in a threatened calcareous marine invertebrate. Managing water quality (e.g. turbidity and sedimentation) in coastal areas to maintain water clarity may help ameliorate some negative effects of ocean acidification on giant clams and potentially other solar-powered calcifiers, such as hard corals.

The Role of Symbiotic Zooxanthellae on Giant Clam Nutrition

OpenAIRE

Ambariyanto

1997-01-01

Zooxanthellae, Symbiodinium sp, are single cell dinoflagellate algae known to live in association with many marine invertebrates such as hermatypic corals, sea anemones, jellyfish and giant clams (family Tridacnidae). In giant clams, these photosynthetic algae are located in a tubular system (known as Z tube system) which occurs within the clams. Apart from filter feeding, the nutrition of the clams is provided by zooxanthellae. These algae are capable of translocating part of their photosynt...

Razor clam to RoboClam: burrowing drag reduction mechanisms and their robotic adaptation

International Nuclear Information System (INIS)

Winter, A G; V; Dorsch, D S; Slocum, A H; Hosoi, A E; Deits, R L H

2014-01-01

Estimates based on the strength, size, and shape of the Atlantic razor clam (Ensis directus) indicate that the animal's burrow depth should be physically limited to a few centimeters; yet razor clams can dig as deep as 70 cm. By measuring soil deformations around burrowing E. directus, we have found the animal reduces drag by contracting its valves to initially fail, and then fluidize, the surrounding substrate. The characteristic contraction time to achieve fluidization can be calculated directly from soil properties. The geometry of the fluidized zone is dictated by two commonly-measured geotechnical parameters: coefficient of lateral earth pressure and friction angle. Calculations using full ranges for both parameters indicate that the fluidized zone is a local effect, occurring between 1–5 body radii away from the animal. The energy associated with motion through fluidized substrate—characterized by a depth-independent density and viscosity—scales linearly with depth. In contrast, moving through static soil requires energy that scales with depth squared. For E. directus, this translates to a 10X reduction in the energy required to reach observed burrow depths. For engineers, localized fluidization offers a mechanically simple and purely kinematic method to dramatically reduce energy costs associated with digging. This concept is demonstrated with RoboClam, an E. directus-inspired robot. Using a genetic algorithm to find optimal digging kinematics, RoboClam has achieved localized fluidization burrowing performance comparable to that of the animal, with a linear energy-depth relationship, in both idealized granular glass beads and E. directus' native cohesive mudflat habitat. (paper)

The Clam Trail: Blending Science Education, Public Art, and Tourism

Science.gov (United States)

Muscio, Cara; Flimlin, Gef; Bushnell, Rick

2011-01-01

The Barnegat Bay Shellfish Restoration's Clam Trail is an award-winning scavenger hunt that combines science education, public art, and tourism. This family adventure has participants seeking out giant painted fiberglass clams, upweller clam nurseries, and points of interest in search of science facts to record on their forms. Upon returning these…

Diversity of lactic acid bacteria in sian-sianzih (fermented clams), a traditional fermented food in Taiwan.

Science.gov (United States)

Chen, Yi-sheng; Wu, Hui-chung; Li, Ya-han; Leong, Kun-hon; Pua, Xiao-hui; Weng, Ming-kai; Yanagida, Fujitoshi

2012-01-30

Sian-sianzih (fermented clams) is a popular traditional fermented food in Taiwan. The lactic acid bacteria (LAB) microflora in sian-sianzih have not been studied in detail. In this study, LAB from sian-sianzih were isolated, characterized and identified. A total of 186 cultures of LAB were isolated from seven sian-sianzih samples and 29 cultures were isolated from its main raw substrate: clams. The identification results revealed up to 11 distinct bacterial species belonging to five genera in sian-sianzih, and three species belonging to two genera in clams. The most common bacterial genera in sian-sianzih were Lactobacillus and Weissella, followed by Leuconostoc, Pediococcus and Lactococcus. A regional similarity in LAB, with differences in diversity, was observed in the current study. On the other hand, Lactococcus lactis subsp. lactis was the most common species found in raw clam samples. The results also suggested that greater LAB diversity could be observed in wild clams than in cultured ones. Furthermore, antibacterial activities of the isolates were determined, and one Weisella hellenica strain showed inhibitory activity against the indicator strain Lactobacilluas sakei JCM 1157(T) . A sensory assessment of seven sian-sianzih samples was also performed and the results indicated that diversity of LAB has a great effect on its aroma and taste formation. The results demonstrate that various LAB species are distributed in sian-sianzih and have a great effect on the flavor of sian-sianzih. Copyright © 2011 Society of Chemical Industry.

Calculating the Contribution of Zooxanthellae to Giant Clams Respiration Energy Requirements

OpenAIRE

Ambariyanto

2002-01-01

Giant clams (Tridacnidae) are known to live in association with photosynthetic single cell dinoflagellate algae commonly called zooxanthellae. These algae which can be found in the mantle of the clams are capable of transferring part of their photosynthates which become an important source of energy to the host ( apart from filter feeding activity). In order to understand the basic biological processes of the giant clams , the contribution of zooxanthellae to the clam's energy requirement nee...

Effects of predation by sea ducks on clam abundance in soft-bottom intertidal habitats

Science.gov (United States)

Lewis, Tyler; Esler, Daniel N.; Boyd, W. Sean

2007-01-01

Recent studies have documented strong, top-down predation effects of sea ducks on mussel populations in rocky intertidal communities. However, the impact of these gregarious predators in soft-bottom communities has been largely unexplored. We evaluated effects of predation by wintering surf scoters Melanitta perspicillata and white-winged scoters M. fusca on clam populations in soft-bottom intertidal habitats of the Strait of Georgia, British Columbia. Specifically, we documented spatial and temporal variation in clam density (clams m–2), scoter diet composition, and the consequences of scoter predation on clam abundance. Of the 3 most numerous clams, Manila clams Venerupis philippinarum and varnish clams Nuttallia obscurata were the primary prey items of both scoter species, while clams of the genus Macoma were rarely consumed by scoters. Between scoter arrival in the fall and departure in the spring, Manila clams decreased in density at most sample sites, while varnish clam densities did not change or declined slightly. Our estimates of numbers of clams consumed by scoters accounted for most of the observed declines in combined abundance of Manila and varnish clams, despite the presence of numerous other vertebrate and invertebrate species known to consume clams. For Macoma spp., we detected an over-winter increase in density, presumably due to growth of clams too small to be retained by our sieve (<5 mm) during fall sampling, in addition to the lack of predation pressure by scoters. These results illustrate the strong predation potential of scoters in soft-bottom intertidal habitats, as well as their potentially important role in shaping community structure.

Composting clam processing wastes in a laboratory- and pilot-scale in-vessel system.

Science.gov (United States)

Hu, Zhenhu; Lane, Robert; Wen, Zhiyou

2009-01-01

Waste materials from the clam processing industry (offal, shells) have several special characteristics such as a high salinity level, a high nitrogen content, and a low C/N ratio. The traditional disposal of clam waste through landfilling is facing the challenges of limited land available, increasing tipping fees, and strict environmental and regulatory scrutiny. The aim of this work is to investigate the performance of in-vessel composting as an alternative for landfill application of these materials. Experiments were performed in both laboratory-scale (5L) and pilot-scale (120L) reactors, with woodchips as the bulking agent. In the laboratory-scale composting test, the clam waste and woodchips were mixed in ratios from 1:0.5 to 1:3 (w/w, wet weight). The high ratios resulted in a better temperature performance, a higher electrical conductivity, and a higher ash content than the low-ratio composting. The C/N ratio of the composts was in the range of 9:1-18:1. In the pilot-scale composting test, a 1:1 ratio of clam waste to woodchips was used. The temperature profile during the composting process met the US Environmental Protection Agency sanitary requirement. The final cured compost had a C/N ratio of 14.6, with an ash content of 167.0+/-14.1g/kg dry matter. In addition to the major nutrients (carbon, nitrogen, calcium, magnesium, phosphorus, potassium, sulfur, and sodium), the compost also contained trace amounts of zinc, manganese, copper, and boron, indicating that the material can be used as a good resource for plant nutrients.

REVIEW: Symbiosis between the Giant Clams (Bivalvia: Cardiidae and Zooxanthellae (Dinophyceae

Directory of Open Access Journals (Sweden)

UDHI EKO HERNAWAN

2008-01-01

Full Text Available Giant clams are the largest bivalves in the world that maintain a mutual relationship with zooxanthellae. Individual giant clam can harbor heterogeneous zooxanthellae, at least four taxa in genus Symbiodinium. The Symbiodinium lives in the zooxanthellal tubular system, a tube structure arising from one of the diverticular duct of the clam’s stomach. Since the numbers of zooxanthellae is the one of some significant factors contributing to the clams growth and survival, the giant clams need to adjust the number of zooxanthellae for physiological reason with unclear mechanism. The important role of the symbiotic relationship to the clams can be seen on the survival, growth and nutrition of the clams. There are at least two significant factors determining the symbiosis, i.e. water temperature in related with level of light intensities and ammonium-phosphate rate. Some topic is still unclear, i.e. the determination of species in genus Symbiodinium, the mechanism for adjusting the population numbers of the algae and what kind of environmental factors determining the symbiosis. Thereby further research is still needed to clarify those missing.

Analysis of trace elements in the shell of asari clams

International Nuclear Information System (INIS)

Arakawa, J.; Sakamoto, W.; Arai, N.; Yoshida, K.

1999-01-01

Strontium concentration in the shells of asari clams collected at different locations was analyzed by PIXE. The Sr concentration of external surface of shell umbo was ranged from 1000 to 3500 ppm for individuals. The Sr concentration of clams collected at Shirahama showed positive correlation with shell length, whereas clams collected at Maizuru did not show significant correlation. This result may be caused from the difference of the spawning seasons between two areas. (author)

Assessment of clam ruditapes philippinarum as Heavy metal bioindicators using NMR-based metabolomics

Energy Technology Data Exchange (ETDEWEB)

Liu, Xiaoli; Zhang, Linbao; You, Liping [Key Laboratory of Coastal Zone Environment Processes, CAS, Shandong Provincial Key Laboratory of Coastal Zone Environment Processes, Yantai Institute of Coastal Zone Research, Chinese Academy of Sciences, Yantai (China); The Graduate School of Chinese Academy of Sciences, Beijing (China); Yu, Junbao; Cong, Ming; Wang, Qing; Li, Fei; Li, Lianzhen; Zhao, Jianmin; Li, Chenghua; Wu, Huifeng [Key Laboratory of Coastal Zone Environment Processes, CAS, Shandong Provincial Key Laboratory of Coastal Zone Environment Processes, Yantai Institute of Coastal Zone Research, Chinese Academy of Sciences, Yantai (China)

2011-08-15

There are mainly distributed three pedigrees (White, Liangdao Red, and Zebra) of Manila clam Ruditapes philippinarum in Yantai population along the Bohai marine and coast. However, the biological differences to environmental stressors have been ignored in toxicology studies, which could lead to the distortion of biological interpretations of toxicological effects induced by environmental contaminants. In this study, we applied a system biology approach, metabolomics to compare the metabolic profiles in digestive gland from three pedigrees of clam and characterize and compare the metabolic responses induced by mercury in clam digestive gland tissues to determine a sensitive pedigree of clam as a preferable bioindicator for metal pollution monitoring and toxicology research. The most abundant metabolites, respectively, included branched-chain amino acids, alanine, and arginine in White samples, glutamate, dimethylglycine, and glycine in Zebra clams and acetylcholine, betaine, glucose, and glycogen in Liangdao Red clams. After 48 h exposure of 20 {mu}g L{sup -1} Hg{sup 2+}, the metabolic profiles from the three pedigrees of clams showed differentially significant changes in alanine, glutamate, succinate, taurine, hypotaurine, glycine, arginine, glucose, etc. Our findings indicate the toxicological effects of mercury exposure in Manila clams including the neurotoxicity, disturbances in energetic metabolisms and osmoregulation in the digestive glands and suggest that Liangdao Red pedigree of clam could be a preferable bioindicator for the metal pollution monitoring based on the more sensitive classes of metabolic changes from digestive glands compared with other two (White and Zebra) pedigrees of clams. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Effect of low salinity on the yellow clam Mesodesma mactroides

Directory of Open Access Journals (Sweden)

YBM. Carvalho

Full Text Available The aim of this study was to determine the lethal salinity (LC50 for the yellow clam Mesodesma mactroides (Bivalvia: Mesodesmatidae and identify histopathological alterations that could be used to diagnose structural changes in clam tissue. Clams in two size classes (adults and juveniles were placed in 10 L chambers and exposed to salinities of 35, 30, 25, 20, 15, 10, and 5 g/L. There were triplicate chambers with seven clams each for each salinity. The LC50 values for a 48 h exposure were 6.5 g/L and 5.7 g/L for adults and juveniles, respectively. For a 96 h exposure, the LC50 values were 10.5 g/L for adults and 8.8 g/L for juveniles. The histological examination of yellow clams exposed to 10 g/L for 96 h showed intercellular oedema and necrotic foci in the epithelium of the digestive gland and occlusion of the lumen of the digestive gland. In conclusion, M. mactroides can be characterised as a moderately euryhaline species, tolerating salinities from 35 to 15 g/L.

Microbiota and environmental stress: how pollution affects microbial communities in Manila clams.

Science.gov (United States)

Milan, M; Carraro, L; Fariselli, P; Martino, M E; Cavalieri, D; Vitali, F; Boffo, L; Patarnello, T; Bargelloni, L; Cardazzo, B

2018-01-01

Given the crucial role of microbiota in host development, health, and environmental interactions, genomic analyses focusing on host-microbiota interactions should certainly be considered in the investigation of the adaptive mechanisms to environmental stress. Recently, several studies suggested that microbiota associated to digestive tract is a key, although still not fully understood, player that must be considered to assess the toxicity of environmental contaminants. Bacteria-dependent metabolism of xenobiotics may indeed modulate the host toxicity. Conversely, environmental variables (including pollution) may alter the microbial community and/or its metabolic activity leading to host physiological alterations that may contribute to their toxicity. Here, 16s rRNA gene amplicon sequencing has been applied to characterize the hepatopancreas microbiota composition of the Manila clam, Ruditapes philippinarum. The animals were collected in the Venice lagoon area, which is subject to different anthropogenic pressures, mainly represented by the industrial activities of Porto Marghera (PM). Seasonal and geographic differences in clam microbiotas were explored and linked to host response to chemical stress identified in a previous study at the transcriptome level, establishing potential interactions among hosts, microbes, and environmental parameters. The obtained results showed the recurrent presence of putatively detoxifying bacterial taxa in PM clams during winter and over-representation of several metabolic pathways involved in xenobiotic degradation, which suggested the potential for host-microbial synergistic detoxifying actions. Strong interaction between seasonal and chemically-induced responses was also observed, which partially obscured such potentially synergistic actions. Seasonal variables and exposure to toxicants were therefore shown to interact and substantially affect clam microbiota, which appeared to mirror host response to environmental variation. It

Ancient Clam Gardens Increased Shellfish Production: Adaptive Strategies from the Past Can Inform Food Security Today

Science.gov (United States)

Groesbeck, Amy S.; Rowell, Kirsten; Lepofsky, Dana; Salomon, Anne K.

2014-01-01

Maintaining food production while sustaining productive ecosystems is among the central challenges of our time, yet, it has been for millennia. Ancient clam gardens, intertidal rock-walled terraces constructed by humans during the late Holocene, are thought to have improved the growing conditions for clams. We tested this hypothesis by comparing the beach slope, intertidal height, and biomass and density of bivalves at replicate clam garden and non-walled clam beaches in British Columbia, Canada. We also quantified the variation in growth and survival rates of littleneck clams (Leukoma staminea) we experimentally transplanted across these two beach types. We found that clam gardens had significantly shallower slopes than non-walled beaches and greater densities of L. staminea and Saxidomus giganteus, particularly at smaller size classes. Overall, clam gardens contained 4 times as many butter clams and over twice as many littleneck clams relative to non-walled beaches. As predicted, this relationship varied as a function of intertidal height, whereby clam density and biomass tended to be greater in clam gardens compared to non-walled beaches at relatively higher intertidal heights. Transplanted juvenile L. staminea grew 1.7 times faster and smaller size classes were more likely to survive in clam gardens than non-walled beaches, specifically at the top and bottom of beaches. Consequently, we provide strong evidence that ancient clam gardens likely increased clam productivity by altering the slope of soft-sediment beaches, expanding optimal intertidal clam habitat, thereby enhancing growing conditions for clams. These results reveal how ancient shellfish aquaculture practices may have supported food security strategies in the past and provide insight into tools for the conservation, management, and governance of intertidal seascapes today. PMID:24618748

Low cycle fatigue properties of CLAM steel at 823 K

Energy Technology Data Exchange (ETDEWEB)

Hu, Xue [Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016 (China); University of Chinese Academy of Sciences, 19 Yuquan Road, Beijing 100049 (China); Huang, Lixin [Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016 (China); State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 (China); Yan, Wei; Wang, Wei [Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016 (China); Sha, Wei [School of Planning, Architecture and Civil Engineering, Queen' s University Belfast, Belfast BT9 5AG (United Kingdom); Shan, Yiyin, E-mail: yyshan@imr.ac.cn [Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016 (China); Yang, Ke, E-mail: kyang@imr.ac.cn [Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016 (China)

2014-09-08

China Low Activation Martensitic (CLAM) steel is considered to be the main candidate material for the first wall components of future fusion reactors in China. In this paper, the low cycle fatigue (LCF) behavior of CLAM steel is studied under fully reversed tension–compression loading at 823 K in air. Total strain amplitude was controlled from 0.14% to 1.8% with a constant strain rate of 2.4×10{sup −3} s{sup −1}. The corresponding plastic strain amplitude ranged from 0.023% to 1.613%. The CLAM steel displayed continuous softening to failure at 823 K. The relationship between strain, stress and fatigue life was obtained using the parameters obtained from fatigue tests. The LCF properties of CLAM steel at 823 K followed Coffin–Manson relationship. Furthermore, irregular serration was observed on the stress–strain hysteresis loops of CLAM steel tested with the total strain amplitude of 0.45–1.8%, which was attributed to the dynamic strain aging (DSA) effect. During continuous cyclic deformation, the microstructure and precipitate distribution of CLAM steel changed gradually. Many tempered martensitic laths were decomposed into subgrains, and the size and number of M{sub 23}C{sub 6} carbide and MX carbonitride precipitates decreased with the increase of total strain amplitude. The response cyclic stress promoted the recovery of martensitic lath, while the thermal activation mainly played an important role on the growth of precipitates in CLAM steel at 823 K. In order to have a better understanding of high-temperature LCF behavior, the potential mechanisms controlling stress–strain response, DSA phenomenon and microstructure changes have also been evaluated.

Ancient clam gardens, traditional management portfolios, and the resilience of coupled human-ocean systems

Directory of Open Access Journals (Sweden)

Julia Jackley

2016-12-01

Full Text Available Indigenous communities have actively managed their environments for millennia using a diversity of resource use and conservation strategies. Clam gardens, ancient rock-walled intertidal beach terraces, represent one example of an early mariculture technology that may have been used to improve food security and confer resilience to coupled human-ocean systems. We surveyed a coastal landscape for evidence of past resource use and management to gain insight into ancient resource stewardship practices on the central coast of British Columbia, Canada. We found that clam gardens are embedded within a diverse portfolio of resource use and management strategies and were likely one component of a larger, complex resource management system. We compared clam diversity, density, recruitment, and biomass in three clam gardens and three unmodified nonwalled beaches. Evidence suggests that butter clams (Saxidomus gigantea had 1.96 times the biomass and 2.44 times the density in clam gardens relative to unmodified beaches. This was due to a reduction in beach slope and thus an increase in the optimal tidal range where clams grow and survive best. The most pronounced differences in butter clam density between nonwalled beaches and clam gardens were found at high tidal elevations at the top of the beach. Finally, clam recruits (0.5-2 mm in length tended to be greater in clam gardens compared to nonwalled beaches and may be attributed to the addition of shell hash by ancient people, which remains on the landscape today. As part of a broader social-ecological system, clam garden sites were among several modifications made by humans that collectively may have conferred resilience to past communities by providing reliable and diverse access to food resources.

Continuous cooling transformation behaviors of CLAM steel

Energy Technology Data Exchange (ETDEWEB)

Wu, Qing-sheng, E-mail: qingsheng.wu@fds.org.cn; Zheng, Shu-hui; Huang, Qun-ying; Liu, Shao-jun; Han, Yang-yang

2013-11-15

The continuous cooling transformation (CCT) behaviors of CLAM (China Low Activation Martensitic) steel were studied, the CCT diagram was constructed, and the influence of cooling rates on the microstructures was also investigated. The microstructures were investigated using optical microscopy (OM) and microhardness tests were also carried out. The results showed that CLAM steel possessed high hardenability and there were ferrite and martensite transformation regions only. The maximum cooling rate to form ferrite microstructure was found to be 10–12 K/min. In order to obtain fully ferrite microstructure, the cooling rate should be lower than 1 K/min. The CCT diagram also gave relevant parameters such as the transformation temperatures, i.e., A{sub c1}, A{sub c3}, M{sub s} and M{sub f} were 1124 K, 1193 K, 705 K and 593 K, respectively. The diagram made it possible to predict the microstructures and properties of CLAM steel with different cooling rates.

Continuous cooling transformation behaviors of CLAM steel

International Nuclear Information System (INIS)

Wu, Qing-sheng; Zheng, Shu-hui; Huang, Qun-ying; Liu, Shao-jun; Han, Yang-yang

2013-01-01

The continuous cooling transformation (CCT) behaviors of CLAM (China Low Activation Martensitic) steel were studied, the CCT diagram was constructed, and the influence of cooling rates on the microstructures was also investigated. The microstructures were investigated using optical microscopy (OM) and microhardness tests were also carried out. The results showed that CLAM steel possessed high hardenability and there were ferrite and martensite transformation regions only. The maximum cooling rate to form ferrite microstructure was found to be 10–12 K/min. In order to obtain fully ferrite microstructure, the cooling rate should be lower than 1 K/min. The CCT diagram also gave relevant parameters such as the transformation temperatures, i.e., A c1 , A c3 , M s and M f were 1124 K, 1193 K, 705 K and 593 K, respectively. The diagram made it possible to predict the microstructures and properties of CLAM steel with different cooling rates

Conversion of Biowaste Asian Hard Clam (Meretrix lusoria) Shells into White-Emitting Phosphors for Use in Neutral White LEDs.

Science.gov (United States)

Chang, Tsung-Yuan; Wang, Chih-Min; Lin, Tai-Yuan; Lin, Hsiu-Mei

2016-12-02

The increasing volume and complexity of waste associated with the modern economy poses a serious risk to ecosystems and human health. However, the remanufacturing and recycling of waste into usable products can lead to substantial resource savings. In the present study, clam shell waste was first transformed into pure and well-crystallized single-phase white light-emitting phosphor Ca₉Gd(PO₄)₇:Eu 2+ ,Mn 2+ materials. The phosphor Ca₉Gd(PO₄)₇:Eu 2+ ,Mn 2+ materials were synthesized by the solid-state reaction method and the carbothermic reduction process, and then characterized and analyzed by means of X-ray diffraction (XRD) and photoluminescence (PL) measurements. The structural and luminescent properties of the phosphors were investigated as well. The PL and quantum efficiency measurements showed that the luminescence properties of clam shell-based phosphors were comparable to that of the chemically derived phosphors. Moreover, white light-emitting diodes were fabricated through the integration of 380 nm chips and single-phase white light-emitting phosphors (Ca 0.979 Eu 0.006 Mn 0.015 )₉Gd(PO₄)₇ into a single package of a white light emitting diode (WLED) emitting a neutral white light of 5298 K with color coordinates of (0.337, 0.344).

Conversion of Biowaste Asian Hard Clam (Meretrix lusoria Shells into White-Emitting Phosphors for Use in Neutral White LEDs

Directory of Open Access Journals (Sweden)

Tsung-Yuan Chang

2016-12-01

Full Text Available The increasing volume and complexity of waste associated with the modern economy poses a serious risk to ecosystems and human health. However, the remanufacturing and recycling of waste into usable products can lead to substantial resource savings. In the present study, clam shell waste was first transformed into pure and well-crystallized single-phase white light-emitting phosphor Ca9Gd(PO47:Eu2+,Mn2+ materials. The phosphor Ca9Gd(PO47:Eu2+,Mn2+ materials were synthesized by the solid-state reaction method and the carbothermic reduction process, and then characterized and analyzed by means of X-ray diffraction (XRD and photoluminescence (PL measurements. The structural and luminescent properties of the phosphors were investigated as well. The PL and quantum efficiency measurements showed that the luminescence properties of clam shell-based phosphors were comparable to that of the chemically derived phosphors. Moreover, white light-emitting diodes were fabricated through the integration of 380 nm chips and single-phase white light-emitting phosphors (Ca0.979Eu0.006Mn0.0159Gd(PO47 into a single package of a white light emitting diode (WLED emitting a neutral white light of 5298 K with color coordinates of (0.337, 0.344.

The Stability of the Giant Clam Holobiont over Time and during Bleaching Stress

KAUST Repository

Pappas, Melissa

2017-12-01

The stability of marine photosymbiotic holobionts has major implications for the future of coral reef communities. This study aims to describe the stability of the Red Sea giant clam holobiont over the duration of one year and during induced bleaching stress under laboratory thermal manipulations. Tridacnid clams of the species Tridacna maxima were sampled at three reef locations near the central Saudi coast of the Red Sea. Associated Symbiodinium of Red Sea giant clams have previously been described to be part of only Clade A, which suggests a strong specificity in the clam-algal partnership, but specific types and potential shifting of types within this clade have not been examined for giant clams. The results from this study confirm that tridacnid symbiont types shift over time and the change between three A1 types suggests a biological and functional significance of two undescribed A1 Symbiodinium types. Experimental bleaching shows that Red Sea giant clams, although exposed to rather hot temperatures naturally, will bleach at 34°C after two weeks, and severely bleached clams likely will not recover. During bleaching, Symbiodinium types shift as well, and shift more drastically than seasonal shifts during the year. This shifting may be an evolved characteristic of the giant clam to aid in surviving major changes in the environment. However, more research is needed to determine if these holobionts are capable of keeping up with the global forecast of warming in reef environments.

PCDD/F and dioxin-like PCB bioaccumulation by Manila clam from polluted areas of Venice lagoon (Italy)

International Nuclear Information System (INIS)

Sfriso, Adriano; Facca, Chiara; Raccanelli, Stefano

2014-01-01

POP bioaccumulation pathways in the clam Tapes philippinarum were examined for two years from juveniles to adult size. Two polluted sites, one with sandy sediment, the other muddy were compared with a reference site characterized by low contamination levels. Juvenile clams coming from a hatchery were reared both on the sediment and in nets suspended at 30 cm from the bottom. POP changes in clam tissue were related to the concentrations recorded in sediments and in the particulate matter during the entire fattening period. Results provided interesting data on the relationships between environmental contamination and bioaccumulation. Contrary to studies on the decontamination times of the clams collected in polluted areas, this work investigates the preferential clam bioaccumulation pathways during growth under different environmental conditions. In general POP bioaccumulation resulted to be correlated to concentrations in SPM rather than in sediments and was higher in S-clams rather than in B-clams. -- Highlights: • PCDD/Fs and dioxin-like PCB accumulation in clam tissues during growth. • Muddy and sandy polluted areas. • How sediment and suspended matter contamination affect clam toxicity. • Clam toxicity and law limits. -- Clam bioaccumulation pathways in polluted areas

Soft shell clams Mya arenaria with disseminated neoplasia demonstrate reverse transcriptase activity

Science.gov (United States)

House, M.L.; Kim, C.H.; Reno, P.W.

1998-01-01

Disseminated neoplasia (DN), a proliferative cell disorder of the circulatory system of bivalves, was first reported in oysters in 1969. Since that time, the disease has been determined to be transmissible through water-borne exposure, but the etiological agent has not been unequivocally identified. In order to determine if a viral agent, possibly a retrovirus, could be the causative agent of DN, transmission experiments were performed, using both a cell-free filtrate and a sucrose gradient-purified preparation of a cell-free filtrate of DN positive materials. Additionally, a PCR-enhanced reverse transcriptase assay was used to determine if reverse transcriptase was present in tissues or hemolymph from DN positive soft shell clams Mya arenaria. DN was transmitted to healthy clams by injection with whole DN cells, but not with cell-free flitrates prepared from either tissues from DN positive clams, or DN cells. The cell-free preparations from DN-positive tissues and hemolymph having high levels of DN cells in circulation exhibited positive reactions in the PCR-enhanced reverse transcriptase assay. Cell-free preparations of hemolymph from clams having low levels of DN (<0.1% of cells abnormal), hemocytes from normal soft shell clams, and normal soft shell clam tissues did not produce a positive reaction in the PCR enhanced reverse transcriptase assay.

Assessment of thermo-mechanical behavior in CLAM steel first wall structures

International Nuclear Information System (INIS)

Liu Fubin; Yao Man

2012-01-01

Highlights: ► China Low Activation Martensitic steel (CLAM) as FW the structural material. ► The thermo-mechanical behavior of the FW was analyzed under the condition of normal ITER operation combined effect of plasma heat flux and neutron heating. ► The temperature dependence of the material physical properties of CLAM is summarized. - Abstract: The temperature and strain distributions of the mockup with distinct structural material (SS316L or China Low Activation Martensitic steel (CLAM)) in two-dimensional model were calculated and analyzed, based on a high heat flux (HHF) test recently reported with heat flux of 3.2 MW/m 2 . The calculated temperature and strain results in the first wall (FW), in which SS316L is as the structural material, showed good agreement with HHF test. By substituting CLAM steel for SS316L the contrast analysis indicates that the thermo-mechanical property for CLAM steel is better than that of SS316 at the same condition. Furthermore, the thermo-mechanical behavior of the FW was analyzed under the condition of normal ITER operation combined effect of plasma heat flux and neutron heating.

Assessment of thermo-mechanical behavior in CLAM steel first wall structures

Energy Technology Data Exchange (ETDEWEB)

Liu Fubin, E-mail: liufubin_1216@126.com [School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, Liaoning (China); Yao Man, E-mail: yaoman@dlut.edu.cn [School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, Liaoning (China)

2012-01-15

Highlights: Black-Right-Pointing-Pointer China Low Activation Martensitic steel (CLAM) as FW the structural material. Black-Right-Pointing-Pointer The thermo-mechanical behavior of the FW was analyzed under the condition of normal ITER operation combined effect of plasma heat flux and neutron heating. Black-Right-Pointing-Pointer The temperature dependence of the material physical properties of CLAM is summarized. - Abstract: The temperature and strain distributions of the mockup with distinct structural material (SS316L or China Low Activation Martensitic steel (CLAM)) in two-dimensional model were calculated and analyzed, based on a high heat flux (HHF) test recently reported with heat flux of 3.2 MW/m{sup 2}. The calculated temperature and strain results in the first wall (FW), in which SS316L is as the structural material, showed good agreement with HHF test. By substituting CLAM steel for SS316L the contrast analysis indicates that the thermo-mechanical property for CLAM steel is better than that of SS316 at the same condition. Furthermore, the thermo-mechanical behavior of the FW was analyzed under the condition of normal ITER operation combined effect of plasma heat flux and neutron heating.

Photosymbiotic giant clams are transformers of solar flux.

Science.gov (United States)

Holt, Amanda L; Vahidinia, Sanaz; Gagnon, Yakir Luc; Morse, Daniel E; Sweeney, Alison M

2014-12-06

'Giant' tridacnid clams have evolved a three-dimensional, spatially efficient, photodamage-preventing system for photosymbiosis. We discovered that the mantle tissue of giant clams, which harbours symbiotic nutrition-providing microalgae, contains a layer of iridescent cells called iridocytes that serve to distribute photosynthetically productive wavelengths by lateral and forward-scattering of light into the tissue while back-reflecting non-productive wavelengths with a Bragg mirror. The wavelength- and angle-dependent scattering from the iridocytes is geometrically coupled to the vertically pillared microalgae, resulting in an even re-distribution of the incoming light along the sides of the pillars, thus enabling photosynthesis deep in the tissue. There is a physical analogy between the evolved function of the clam system and an electric transformer, which changes energy flux per area in a system while conserving total energy. At incident light levels found on shallow coral reefs, this arrangement may allow algae within the clam system to both efficiently use all incident solar energy and avoid the photodamage and efficiency losses due to non-photochemical quenching that occur in the reef-building coral photosymbiosis. Both intra-tissue radiometry and multiscale optical modelling support our interpretation of the system's photophysics. This highly evolved 'three-dimensional' biophotonic system suggests a strategy for more efficient, damage-resistant photovoltaic materials and more spatially efficient solar production of algal biofuels, foods and chemicals.

Great Lakes clams find refuge from zebra mussels in restored, lake-connected marsh (Ohio)

Science.gov (United States)

Nichols, S. Jerrine; Wilcox, Douglas A.

2004-01-01

Since the early 1990s, more than 95 percent of the freshwater clams once found in Lake Erie have died due to the exotic zebara mussel (Dreissena polymorpha). Zebra mussels attach themselves to native clams in large numbers, impeding the ability of the clams to eat and burrow. However, in 1996, we discovered a population of native clams in Metzger Marsh in western Lake Erie (about 50 miles [80 km] east of Toledo) that were thriving despite the longtime presence of zebra mussel in surrounding waters. At that time, Metzger Marsh was undergoing extensive restoration, including construction of a dike to replace the eroded barrier beach and of a water-control structure to maintain hydrologic connections with the lake (Wilcox and Whillans 1999). The restoration plan called for a drawdown of water levels to promote plant growth from the seedbank -- a process that would also destroy most of the clam population. State and federal resource managers recommended removing as many clams as possible to a site that was isolated from zebra mussels, and then returning them to the marsh after it was restored. We removed about 7,000 native clams in 1996 and moved them back to Metzger Marsh in 1999.

A SOCIAL COST-BENEFIT ANALYSIS OF A SMALL-SCALE CLAM ...

African Journals Online (AJOL)

Results from the CBA yielded positive net present values (NPVs) for project options involving live clams being sold on the export market (to Hong Kong) for R24.70 kg-1 and negative NPVs for domestic market options (Johannesburg and Cape Town), where the clam would be sold for R6.50 kg-1. Assuming a discount rate ...

Concentrations of organotin compounds in sediment and clams collected from coastal areas in Vietnam

International Nuclear Information System (INIS)

Midorikawa, Sayaka; Arai, Takaomi; Harino, Hiroya; Ohji, Madoka; Nguyen Duc Cu; Miyazaki, Nobuyuki

2004-01-01

Levels of butyltin (BT) and phenyltin (PT) compounds were determined in sediments and clam Meretrix spp. collected from north and central coastal areas in Vietnam. Concentrations of TBT in sediments ranged from 0.89 to 34 ng g -1 dry wt and those in clams ranged from 1.4 to 56 ng g -1 wet wt. The levels of TBT in sediments and clams from Vietnam were within limits reported from other countries. Further, the TBT level in clams was lower than the tolerable average residue level (TARL) estimated based on tolerable daily intake (TDI). Trace amounts of PTs were also found in both sediment and clam samples. In sediments from north and central Vietnam, the concentrations of TBT were highest in the order of Hue (28 ng g -1 dry wt), Cua Luc (15 ng g -1 dry wt), Sam Son (6.3 ng g -1 dry wt), and Tra Co (5.5 ng g -1 dry wt). Among the clams from north and central Vietnam, the levels of TBT in clams from Cua Luc were dramatically high at 47 ng g -1 wet wt. TBT formed the principal butyltin species in sediment at all sites studied. The ratios of TBT in sediment were higher among BT compounds at all study sites. Of total BTs, TBT was the dominant species in clams from almost all sites studied. In spatial distribution, TPT showed a pattern similar to TBT, suggesting the use of TPT as an antifouling paint. The partition coefficient between sediment and calms was calculated. The partition coefficients of TBT and TPT were 2.01 (0.56-5.5) and 9.23 (3.1-20), respectively. These results show that sediment-bound TBT is a source of contamination to clams in addition to dissolved TBT

Recolonization of reactor cooling water system by the Asiatic clam Corbicula fluminea

International Nuclear Information System (INIS)

Harvey, R.S.

1978-01-01

Recolonization rates for the Asiatic clam Corbicula fluminea ranged from 3.0 to 5.6 metric tons per year in cooling water basins for a nuclear production reactor at the Savannah River Plant. However, a 10-month cleaning cycle for each basin (flow area, 6100 m 2 ) keeps the depth of the silt/clam layer low. With this cleaning frequency, Corbicula are not reaching heat exchangers at sufficient size or in sufficient numbers to restrict flow. Data are presented on the size/age distribution for clams recolonizing cooling water basins between cleanings

Sensory Characteristics of Mud Clam (Polymesoda Erosa) Hydrolysate

International Nuclear Information System (INIS)

Normah Ismail; Noorasma Mustakim

2016-01-01

Mud clam (Polymesoda erosa) was hydrolysed using two different microbial enzymes; alcalase and flavourzyme. The volatile compounds, amino acids and molecular weight associated with umami and bitter taste in mud clam hydrolysate were determined by head space solid phase micro-extraction gas chromatography (HS-SPME-GCMS), High performance liquid chromatography (HPLC) and sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE). The characteristics of hydrolysates produced using alcalase and flavourzyme were compared. In total, eighteen, seven and six volatile compounds were identified in the flesh, alcalase hydrolysate and flavourzyme hydrolysate, respectively. 2-piperidinone volatile compound content which is associated with bitterness was 6.79 % in alcalase hydrolysate and 3.78 % in flavourzyme hydrolysate. SDS-PAGE results showed that alcalase hydrolysate contains smaller peptide (<52 kDa) compared to flavourzyme hydrolysate (<126 kDa). In addition, sensory analysis using quantitative descriptive analysis (QDA) showed that flavourzyme hydroysate was the least bitter but elicited more umami taste compared to alcalase hydrolysate. Further treatments are still needed to enhance umami taste and to remove bitter taste in mud clam hydrolysate. (author)

Long-Term Surveys Show Invasive Overbite Clams (Potamocorbula amurensis are Spatially Limited in Suisun Marsh, California

Directory of Open Access Journals (Sweden)

Jason Baumsteiger

2017-07-01

Full Text Available https://doi.org/10.15447/sfews.2017v15iss2art6The overbite clam (Potamocorbula amurensis is a major invasive species in the San Francisco Estuary, California, and has been implicated in the decline of pelagic productivity and native fish species. Little is known of its impact on Suisun Marsh, a large brackish tidal region of the estuary. We looked at the abundance and spatial distribution of clams in the marsh, including examining the influence of water quality, using long-term (1988–2015 otter trawl surveys. Temporal trends indicated that overbite clam abundance has been increasing, but adult clams were spatially restricted to a single large slough (Suisun. Clams were absent from most interior channels, limiting their overall effect on the marsh aquatic ecosystem. Abiotic variables, particularly salinity, proved important predictors of overbite clam abundance, although the variables examined alone could not explain overbite clam distributions. We propose that connectivity, detritus loads, and/or predation pressure may work in conjunction with abiotic variables to cause poor survival rates for recruits in interior marsh sites, keeping the distribution limited. Overall results are encouraging for restoration projects in brackish tidal marshes that need to deal with overbite clams.

Who's working on giant clam culture?

OpenAIRE

Vega, M.J.M.

1990-01-01

An examination is made of the literature on giant clam (Tridacna ) culture methods induced spawning, larvae, larval and post-larval rearing and socioeconomics. ASFA and the ICLARM library and professional staff collections were used for the search.

PCDD/F and dioxin-like PCB bioaccumulation by Manila clam from polluted areas of Venice lagoon (Italy).

Science.gov (United States)

Sfriso, Adriano; Facca, Chiara; Raccanelli, Stefano

2014-01-01

POP bioaccumulation pathways in the clam Tapes philippinarum were examined for two years from juveniles to adult size. Two polluted sites, one with sandy sediment, the other muddy were compared with a reference site characterized by low contamination levels. Juvenile clams coming from a hatchery were reared both on the sediment and in nets suspended at 30 cm from the bottom. POP changes in clam tissue were related to the concentrations recorded in sediments and in the particulate matter during the entire fattening period. Results provided interesting data on the relationships between environmental contamination and bioaccumulation. Contrary to studies on the decontamination times of the clams collected in polluted areas, this work investigates the preferential clam bioaccumulation pathways during growth under different environmental conditions. In general POP bioaccumulation resulted to be correlated to concentrations in SPM rather than in sediments and was higher in S-clams rather than in B-clams. Copyright © 2013 Elsevier Ltd. All rights reserved.

Effect of coastal eutrophication on heavy metal bioaccumulation and oral bioavailability in the razor clam, Sinonovacula constricta

Energy Technology Data Exchange (ETDEWEB)

Tu, Tengxiu [College of Chemistry and Environment, Minnan Normal University, Zhangzhou 363000 (China); Li, Shunxing, E-mail: lishunxing@mnnu.edu.cn [College of Chemistry and Environment, Minnan Normal University, Zhangzhou 363000 (China); Fujian Province Key Laboratory of Modern Analytical Science and Separation Technology (China); Chen, Lihui [College of Chemistry and Environment, Minnan Normal University, Zhangzhou 363000 (China); Zheng, Fengying; Huang, Xu-Guang [College of Chemistry and Environment, Minnan Normal University, Zhangzhou 363000 (China); Fujian Province Key Laboratory of Modern Analytical Science and Separation Technology (China)

2014-10-15

Graphical abstract: - Highlights: • Razor clams are often exposed to coastal eutrophication. • The bioaccumulation of Fe, Ni, V, and As was promoted by eutrophication. • Bionic gastrointestinal tract was used for metal oral bioavailability assessment. • Eutrophication decreased oral bioavailability of Fe and Pb but enhanced for V. • The daily maximum allowable intakes are controlled by eutrophication levels. - Abstract: As traditional seafoods, the razor clams are widely distributed from tropical to temperate areas. Coastal razor clams are often exposed to eutrophication. Heavy metal contamination is critical for seafood safety. However, how eutrophication affects bioaccumulation and oral bioavailability of heavy metals in the razor clams is unknown. After a four-month field experimental cultivation, heavy metals (Fe, Cu, Ni, V, As, and Pb) could be bioaccumulated by the razor clams (Sinonovacula constricta) through exposure to metals present in water and sediments or in the food chain, and then transferred to human via consumption of razor clams. Bionic gastrointestinal digestion and monolayer liposome extraction are used for metal oral bioavailability (OBA) assessment. The influence of eutrophication on OBA is decreased for Fe and Pb and increased for V. A significant positive linear correlation was observed between the bioaccumulation factors of Fe, Ni, V, and As in razor clams and the coastal eutrophication. These results may be due to the effect of eutrophication on metal species transformation in coastal seawater and subcellular distribution in razor clams. The maximum allowable daily intakes of razor clams are controlled by eutrophication status and the concentration of affinity-liposome As in razor clams.

Effect of coastal eutrophication on heavy metal bioaccumulation and oral bioavailability in the razor clam, Sinonovacula constricta

International Nuclear Information System (INIS)

Tu, Tengxiu; Li, Shunxing; Chen, Lihui; Zheng, Fengying; Huang, Xu-Guang

2014-01-01

Graphical abstract: - Highlights: • Razor clams are often exposed to coastal eutrophication. • The bioaccumulation of Fe, Ni, V, and As was promoted by eutrophication. • Bionic gastrointestinal tract was used for metal oral bioavailability assessment. • Eutrophication decreased oral bioavailability of Fe and Pb but enhanced for V. • The daily maximum allowable intakes are controlled by eutrophication levels. - Abstract: As traditional seafoods, the razor clams are widely distributed from tropical to temperate areas. Coastal razor clams are often exposed to eutrophication. Heavy metal contamination is critical for seafood safety. However, how eutrophication affects bioaccumulation and oral bioavailability of heavy metals in the razor clams is unknown. After a four-month field experimental cultivation, heavy metals (Fe, Cu, Ni, V, As, and Pb) could be bioaccumulated by the razor clams (Sinonovacula constricta) through exposure to metals present in water and sediments or in the food chain, and then transferred to human via consumption of razor clams. Bionic gastrointestinal digestion and monolayer liposome extraction are used for metal oral bioavailability (OBA) assessment. The influence of eutrophication on OBA is decreased for Fe and Pb and increased for V. A significant positive linear correlation was observed between the bioaccumulation factors of Fe, Ni, V, and As in razor clams and the coastal eutrophication. These results may be due to the effect of eutrophication on metal species transformation in coastal seawater and subcellular distribution in razor clams. The maximum allowable daily intakes of razor clams are controlled by eutrophication status and the concentration of affinity-liposome As in razor clams

Dickens on the Industrial Revolution. Hard Times and Household Words

OpenAIRE

Herrero Migueláñez, Beatríz

2015-01-01

Este trabajo se centra en las ideas de Dickens acerca de la Revolución Industrial y su reflejo en Hard Times y en los artículos periodísticos cuyo contenido es similar al reflejado en la novela, publicada en Household Words. Se centra también en el análisis comparativo de las dos versiones existentes de la novela y de los artículos. También se analiza el género de la novela considerada como una novela industrial. De este estudio se puede concluir, primero que hay intertextualidad entre los ar...

Biodiesel Production from Castor Oil by Using Calcium Oxide Derived from Mud Clam Shell

OpenAIRE

Ismail, S.; Ahmed, A. S.; Anr, Reddy; Hamdan, S.

2016-01-01

The catalytic potential of calcium oxide synthesized from mud clam shell as a heterogeneous catalyst for biodiesel production was studied. The mud clam shell calcium oxide was characterized using particle size analyzer, Fourier transform infrared spectroscopy, scanning electron microscopy, and BET gas sorption analyzer. The catalyst performance of mud clam shell calcium oxide was studied in the transesterification of castor oil as biodiesel. Catalyst characterization and transesterification s...

Dimethylsulfoniopropionate in six species of giant clams and the evolution of dimethylsulfide after death

Energy Technology Data Exchange (ETDEWEB)

Hill, R.W.; Hill, S.D. [Michigan State Univ., East Lansing, MI (United States). Dept. of Zoology; Dacey, J.W.H. [Woods Hole Oceanographic Inst., Woods Hole, MA (United States). Dept. of Biology; Edward, A. [Micronesia College, Pohnpei (Micronesia, Federated States); Hicks, W.A. [Michigan State Univ., East Lansing, MI (United States). Dept. of Bioichemistry and Molecular Biology

2004-05-01

Dimethylsulfoniopropionate (DMSP) could accumulate in large concentrations in animals living symbiotically with algae. The giant clam family Tridacnidae accumulates DMSP because they have a symbiotic relationship with dinoflagellates (or zooxanthellae). In this study, well preserved clam tissues from the western Pacific Islands were analyzed to provide definitive evidence of DMSP in the tissues. Six of the common species in the Tridacnidae family were examined. The objective was to test the hypothesis that dimethyl sulfide (DMS) is released from clam tissues soon after death due to the breakdown of DMSP tissue. In particular, it determined if DMS is responsible for the problem of potent odours and off-taste that have hindered the commercial success of giant clams mariculture. Gas chromatography and mass spectrometry was used in this study to measure DMSP concentrations in siphonal mantle, byssal mantle, adductor muscle and gill tissues. The formation of DMS by tissues after death was documented. It was suggested that since giant clams associate with dinoflagellates, they could accumulate DMSP to high concentrations which could affect multiple properties and functions. It was concluded that the perishability of giant clam tissues is most likely due to the high concentrations of DMS produced one day post mortem. 15 refs., 2 tabs., 4 figs.

An overview of the welding technologies of CLAM steels for fusion application

Energy Technology Data Exchange (ETDEWEB)

Chen Xizhang, E-mail: kernel.chen@gmail.com [School of Materials Science and Engineering, Jiangsu University, ZhenJiang, Jiangsu 212013 (China); Huang Yuming [School of Materials Science and Engineering, Jiangsu University, ZhenJiang, Jiangsu 212013 (China); Madigan, Bruce [Montana Tech. of University of Montana, Butte, MT 59701 (United States); Zhou Jianzhong [School of Mechanical Engineering, Jiangsu University, ZhenJiang, Jiangsu 221013 (China)

2012-09-15

Highlights: Black-Right-Pointing-Pointer Welding technologies of China Low Activation Martensitic steel is overviewed. Black-Right-Pointing-Pointer Most welding technologies in use are discussed and suggestions are given. Black-Right-Pointing-Pointer Proper welding technologies could ensure weld properties but more detailed work are necessary. - Abstract: China Low Activation Martensitic steel (CLAMs), a kind of RAFM steel with Chinese intellectual property rights, is considered as the primary structural material for the China-designed ITER test blanket module (TBM). As one of the key issues in the fabrication of the fusion reactor, the welding technologies of CLAMs are reviewed. Emphasis is placed on the weldability of CLAMs by different welding methods, and on the properties of as-welded and post-weld heat-treated joints. Recent highlights in research and development for the welding of CLAMs show that proper welding procedure could provide welds with adequate tensile strength but the welds exhibit lower impact toughness compared with the base metal. Post-weld heat treatment (PWHT) and the application of ultrasonic energy during TIG welding could dramatically improve impact toughness. Research also shows that welds in CLAMs have sufficient resistance to swelling under irradiation as well as suitable compatibility with liquid LiPb. The microstructure, mechanical and other physical properties of welds are significantly different from those of the base metal due to the complicated welding thermal cycle. The weld joint is the area most likely to fail one or more of the design requirements within the fusion reactor. Therefore significant additional research is necessary to ensure safe application of welded CLAM steel for fusion reactor construction.

Review on the Risk Assessment of Heavy Metals in Malaysian Clams.

Science.gov (United States)

Hossen, Md Faruk; Hamdan, Sinin; Rahman, Md Rezaur

2015-01-01

The current review discusses the levels of six heavy metals in different clam species from 34 sites of Malaysian coasts. The concentrations (µg/g dry weight) of these heavy metals ranged around 0.18-8.51, 0.13-17.20, 2.17-7.80, 0.84-36.00, 24.13-368.00, and 177.82-1912.00 for Cd, Pb, Ni, Cu, Zn, and Fe, respectively. It was observed that the concentrations of metals slightly depend on different clam species but mostly depend on site locations. According to Malaysian Food Regulation (1985), about 30% and more than 50% sites are safe from Cd and Pb contamination, respectively, and also the clam species from the other populations studied were safe for consumption.

The Stability of the Giant Clam Holobiont over Time and during Bleaching Stress

KAUST Repository

Pappas, Melissa

2017-01-01

Experimental bleaching shows that Red Sea giant clams, although exposed to rather hot temperatures naturally, will bleach at 34°C after two weeks, and severely bleached clams likely will not recover. During bleaching, Symbiodinium types shift as well, and shift more drastically than seasonal shifts during the year. This shifting may be an evolved characteristic of the giant clam to aid in surviving major changes in the environment. However, more research is needed to determine if these holobionts are capable of keeping up with the global forecast of warming in reef environments.

Ten-month recolonization of the k-area cooling water system by the Asiatic clam Corbicula fluminea

International Nuclear Information System (INIS)

Harvey, R.S.

1978-01-01

The Asiatic clam Corbicula fluminea was found in the Savannah River near Augusta, Georgia, in 1973. In 1975, Corbicula clogged heat exchangers and caused a shutdown of P Reactor, one of three operating nuclear production reactors (P, K, and C) at the Savannah River Plant (SRP). Clams were subsequently removed from K-Area and C-Area cooling water systems. At K Area, large volumes of river water are discharged into three 23-megaliter basins (Figure 1) where some settling occurs before the water is pumped through heat exchangers in the reactor area. The deposited silt provides a suitable substrate for Corbicula growth and reproduction. The silt must be removed at regular inervals to prevent heat exchanger pluggage arising from high populations of clams in the basins. The 186 basins at K Area were sampled to determine: the buildup of the Corbicula population since the basins were last cleaned, the size/age distribution of the clam population, and the occurrence of clam larvae. In addition, debris from flushes of Emergency Cooling Water Headers CW-39 and RW-1 were analyzed to determine: the relative abundance of live and dead clams, the size/age distribution of clams, and the volume of individual debris components

Comparative bioaccumulation and toxicity of silver in different populations of the intra-sedimentary clam Macoma balthica exposed or not to metal contamination in their natural medium

International Nuclear Information System (INIS)

Amiard-Triquet, C.; Geffard, A.; Boisson, F.; Ballan-Dufrancais, C.; Jeantet, A.Y.; Berthet, B.; Mouneyrac, C.

1999-01-01

Tolerance to pollutants was observed in living organisms chronically exposed in their environment and detoxification processes have been evoked to explain such observations. In the present study, this hypothesis has been tested in clams originating from an industrialized estuary (Loire, Fr) and from an area submitted only to low anthropogenic influx (Bay of Somme, Fr). The comparison was carried out at different contamination levels in clams exposed to silver (50 to 100 ng Ag.ml -1 till LT 50 when 50% lethality was reached), a metal which has been described as liable to be detoxified through insolubilization and/or binding to metallothionein (MT)

Review on the Risk Assessment of Heavy Metals in Malaysian Clams

Directory of Open Access Journals (Sweden)

Md. Faruk Hossen

2015-01-01

Full Text Available The current review discusses the levels of six heavy metals in different clam species from 34 sites of Malaysian coasts. The concentrations (µg/g dry weight of these heavy metals ranged around 0.18–8.51, 0.13–17.20, 2.17–7.80, 0.84–36.00, 24.13–368.00, and 177.82–1912.00 for Cd, Pb, Ni, Cu, Zn, and Fe, respectively. It was observed that the concentrations of metals slightly depend on different clam species but mostly depend on site locations. According to Malaysian Food Regulation (1985, about 30% and more than 50% sites are safe from Cd and Pb contamination, respectively, and also the clam species from the other populations studied were safe for consumption.

Recovery of intertidal hardshelled clams in Prince William Sound from Exxon Valdez oiling and shoreline treatments

International Nuclear Information System (INIS)

Houghton, J.P.; Lees, D.C.; Driskell, W.B.

1994-01-01

Native little neck (Protothaca staminea) and butter clams (Saxidomus giganteus) were quantitatively surveyed from 1989 through 1993 to evaluate effects from the Exxon Valdez oil spill. Hydraulic washing of sand and gravel beaches altered beach morphology by transporting material down slope from upper elevations, often burying the lower beach in several centimeters of sediment having a relatively low content of fines and organic carbon. Hydraulically washed beaches showed significant reductions in clam densities in 1989 and 1990. Recruitment of clams was very limited on these beaches through 1993; as a result, clam densities on these hydraulically washed beaches remain very depressed compared to those on beaches that were unoiled or oiled but not washed. Littlenecks transplanted from a reference site to a heavily oiled but untreated site showed significant patterns of increased mortality, decreased growth, and increased bioaccumulation of PAH in response to a gradient in sediment PAH, This same heavily oiled site has consistently had among the highest rates of hardshelled clam recruitment of any of the sites sampled. Littlenecks also were transplanted to another heavily oiled beach that had been hydraulically washed and had little remaining hydrocarbons. These clams showed very high survival, yet this beach has had very little clam recruitment. It is hypothesized that recruitment at this site may be inhibited by the low level of finer sediments and low organic content remaining after washing

Evaluation of 4-nonylphenol toxicity in the clam Tapes philippinarum

International Nuclear Information System (INIS)

Matozzo, Valerio; Deppieri, Martina; Oschino, Vanessa; Marin, M.G.

2003-01-01

Lethal and sub lethal effects of 4-nonylphenol (NP) were investigated in the clam Tapes philippinarum from the Lagoon of Venice. In a 96-h lethality test, bivalves were exposed to the following NP concentrations: 0, 0+acetone, .19, 0.38, 0.75, 1.5, and 3.0 mg NP/L. The 96-h LC 50 value was 1.12 mg P/L. No mortality was observed at 0.19 mg NP/L, whereas at 1.5 and 3.0 mg P/L both siphons and foot of clams were often cut-off, the animals being unable to withdraw them before shell closure, suggesting the possible narcotic effect of NP. Lower concentrations (0, 0+acetone, 0.025, 0.05, 0.1, nd 0.2 mg NP/L) were then used to evaluate sub lethal NP effects on clearance rate (CR), respiration rate (RR), scope for growth (SFG), and survival in ir. Following a 7-day exposure, decreased RRs were found at all NP concentrations tested. Significant decreases in the CR and SFG were only observed at the two highest NP concentrations (0.1 and 0.2 mg/L), with SFG reductions reaching 54% and 71%, respectively. Last, the highest concentrations tested significantly decreased the resistance of clams to exposure to air and enhanced the mortality rate. As the lowest effective NP concentrations are similar to environmentally realistic levels, a condition of potential risk for the well-being of clam populations in estuarine areas is highlighted

Size-related and seasonal diet of the manila clam (Ruditapes philippinarum), as determined using dual stable isotopes

Science.gov (United States)

Suh, Yeon Jee; Shin, Kyung-Hoon

2013-12-01

Stable isotope ratios of lab-cultured Manila clams (Ruditapes philippinarum) and those from natural tidal flats of Seonjae Island in Korea were investigated in terms of their dietary uptake patterns in relation to body size and season. The smallest size group of wild Manila clams revealed significantly depleted δ15N based on the results of a one-way ANOVA. There was significant seasonal change in the proportional contribution of food sources, especially in winter, from benthic particulate organic matter (BPOM) to pelagic particulate organic matter (POM). Laboratory-cultured Manila clams showed growth rates of 6.02-37.75 mm/yr, and smaller-sized clams did not fully utilise the microalgal diets that were provided constantly. Instead, they derived most of their energy from detritus or dead microalgae that had settled on the bottom. Bigger clams, however, exhibited well-balanced source contributions, converting the microalgal diets into biomass. This demonstrates intra-specific differences in the growth rates and preferred diet uptakes of Manila clams, even under similar environmental conditions.

Life assessment of PVD based hard coatings by linear sweep voltammetry for high performance industrial application

International Nuclear Information System (INIS)

Malik, M.; Alam, S.; Irfan, M.; Hassan, Z.

2006-01-01

PVD based hard coatings have remarkable achievements in order to improve Tribological and surface properties of coating tools and dies. As PVD based hard coatings have a wide range of industrial applications especially in aerospace and automobile parts where they met different chemical attacks and in order to improve industrial performance these coatings must provide an excellent resistance against corrosion, high temperature oxidation and chemical reaction. This paper focuses on study of behaviour of PVD based hard coatings under different corrosive environments like as H/sub 2/SO/sub 4/, HCl, NaCl, KCl, NaOH etc. Corrosion rate was calculate under linear sweep voltammetry method where the Tafel extrapolation curves used for continuously monitoring the corrosion rate. The results show that these coatings have an excellent resistance against chemical attack. (author)

Immune- and Pollution-mediated DNA Damage in Two Wild Mya arenaria Clam Populations

Directory of Open Access Journals (Sweden)

François Gagné

2009-01-01

Full Text Available In aquatic environments, genotoxicity results from the effects of pollution combined with the inflammatory response triggered by the immune system. Indeed, the production of nitrosylated DNA and proteins are though to arise from the production of peroxinitrite during phagocytosis and inflammation. The purpose of this study was to examine new DNA biomarkers that differentiate between immune- and pollution-mediated genotoxicity in wild clam populations. Intertidal clam populations were sampled and analyzed for gonadal DNA strand breaks, DNA nitrosylation and xanthine oxidoreductase (XOR activity (purine salvage pathway. The clam weight-to-shell-length ratio, the gonado-somatic index (GSI, age status, lipid peroxidation, xenobiotic conjugation activity (glutathione S-transferase (GST and phagocytic activity were examined to shed light on their relationships with the observed genotoxic endpoints. XOR activity and DNA strand breaks were generally elevated at polluted sites and correlated significantly with clam weight-to-shell-length ratios and DNA nitrosylation. DNA nitrosylation was also higher at some sites and correlated significantly with phagocytic activity and with DNA strand breaks. This study showed that DNA strand breaks were associated with both immune- and pollution-mediated effects. This suggests that there is a loss of DNA repair capacity due to the combined effects of aging, pollution and immune response in wild clam populations that are impacted by anthropogenic activity.

New polymorphic microsatellite markers derived from hemocyte cDNA library of Manila clam Ruditapes philippinarum challenged by the protozoan parasite Perkinsus olseni

Science.gov (United States)

Kang, Hyun-Sil; Hong, Hyun-Ki; Park, Kyung-Il; Cho, Moonjae; Youn, Seok-Hyun; Choi, Kwang-Sik

2017-03-01

Manila clam Ruditapes philippinarum is one of the most important benthic animals in the coastal north Pacific region, where clam populations have been mixed genetically through trade and aquaculture activities. Accordingly, identification of the genetically different clam populations has become one of the most important issues to manage interbreeding of the local and introduced clam populations. To identify genetically different populations of clam populations, we developed 11 expressed sequence tag (EST)-microsatellite loci (i.e., simple sequence repeat, SSR) from 1,128 clam hemocyte cDNA clones challenged by the protozoan parasite Perkinsus olseni. Genotype analysis using the markers developed in this study demonstrated that clams from a tidal flat on the west coast contained 6 to 19 alleles per locus, and a population from Jeju Island had 4 to 20 alleles per locus. The expected heterozygosity of the 2 clam populations ranged from 0.472 to 0.919 for clams from the west coast, and 0.494 to 0.919 for clams from Jeju Island, respectively. Among the 11 loci discovered in this study, 7 loci significantly deviated from the Hardy-Weinberg equilibrium after Bonferroni correction. The 5 loci developed in this study also successfully amplified the SSRs of R. variegatus, a clam species taxonomically very close to R. philippinarum, from Hong Kong and Jeju Island. We believe that the 11 novel polymorphic SSR developed in this study can be utilized successfully in Manila clam genetic diversity analysis, as well as in genetic discrimination of different clam populations.

Biodiesel Production from Castor Oil by Using Calcium Oxide Derived from Mud Clam Shell

Directory of Open Access Journals (Sweden)

S. Ismail

2016-01-01

Full Text Available The catalytic potential of calcium oxide synthesized from mud clam shell as a heterogeneous catalyst for biodiesel production was studied. The mud clam shell calcium oxide was characterized using particle size analyzer, Fourier transform infrared spectroscopy, scanning electron microscopy, and BET gas sorption analyzer. The catalyst performance of mud clam shell calcium oxide was studied in the transesterification of castor oil as biodiesel. Catalyst characterization and transesterification study results of synthesized catalyst proved the efficiency of the natural derived catalyst for biodiesel production. A highest biodiesel yield of 96.7% was obtained at optimal parameters such as 1 : 14 oil-to-methanol molar ratio, 3% w/w catalyst concentration, 60°C reaction temperature, and 2-hour reaction time. Catalyst reusability test shows that the synthesized calcium oxide from mud clam shell is reusable up to 5 times.

Can ecological history influence response to pollutants? Transcriptomic analysis of Manila clam collected in different Venice lagoon areas and exposed to heavy metal.

Science.gov (United States)

Milan, Massimo; Matozzo, Valerio; Pauletto, Marianna; Di Camillo, Barbara; Giacomazzo, Matteo; Boffo, Luciano; Binato, Giovanni; Marin, Maria Gabriella; Patarnello, Tomaso; Bargelloni, Luca

2016-05-01

Chronic exposure to environmental pollutants can exert strong selective pressures on natural populations, favoring the transmission over generations of traits that enable individuals to survive and thrive in highly impacted environments. The lagoon of Venice is an ecosystem subject to heavy anthropogenic impact, mainly due to the industrial activities of Porto Marghera (PM), which led to a severe chemical contamination of soil, groundwater, and sediments. Gene expression analysis on wild Manila clams collected in different Venice lagoon areas enabled to identify differences in gene expression profiles between clams collected in PM and those sampled in clean areas, and the definition of molecular signatures of chemical stress. However, it remains largely unexplored to which extent modifications of gene expression patterns persists after removing the source of contamination. It is also relatively unknown whether chronic exposure to xenobiotics affects the response to other chemical pollutants. To start exploring such issues, in the present study a common-garden experiment was coupled with transcriptomic analysis, to compare gene expression profiles of PM clams with those of clams collected in the less impacted area of Chioggia (CH) during a period under the same control conditions. Part of the two experimental groups were also exposed to copper for seven days to assess whether different "ecological history" does influence response to such pollutant. The results obtained suggest that the chronic exposure to chemical pollution generated a response at the transcriptional level that persists after removal for the contaminated site. These transcriptional changes are centered on key biological processes, such as defense against either oxidative stress or tissue/protein damage, and detoxification, suggesting an adaptive strategy for surviving in the deeply impacted environment of Porto Marghera. On the other hand, CH clams appeared to respond more effectively to copper

Preliminary Study on Hot Isostatic Pressing Diffusion Bonding for CLAM Steel

International Nuclear Information System (INIS)

Chunjing Li; Qunying Huang; Yican Wu

2006-01-01

China Low Activation Martensitic (CLAM) steel is being developed in ASIPP (Institute of Plasma Physics, Chinese Academy of Sciences) since three years ago. CLAM is selected as the major candidate structure materials for the FDS series design of fusion reactors and for China liquid metal LiPb Test Blanket Module (TBM) for ITER i.e. DFLL-TBM, which are being carried out in ASIPP. Since the hot isostatic pressing (HIP) bonding technique is one of the main candidate bonding techniques for manufacturing of the first wall of a fusion reactor, research of the HIP technique on CLAM/CLAM is greatly needed. Preliminary HIP diffusion bonding experiments on CLAM steel have been performed. A few machining approaches such as dry-milling, turnery and grounding etc. were used to prepare the sample surfaces and then they were degreased with a mixture of alcohol, ether and acetone in an ultrasonic bath. The samples were joined by HIP diffusion bonding with the compression pressure of 150 MPa and the holding time of 2 ∼ 3 hours under different temperatures between 950 deg. and 1100 deg.. Different seal techniques of the capsules were studied as well. Then appropriate post heat treatment was done. Tests on mechanical properties of the joints such as tensile strength and impact toughness have been performed. The preliminary results show that the tensile properties are roughly the same as those of the base material. The absorbed energy of the joints at present is a little low and further research is needed to increase it. Microstructure of the joints was studied by optical microscope, SEM and TEM. Compositions of the defects on the joining line were analyzed by EDS. Through analysis of the results, optimized parameters for HIP are given. (author)

Study of the toxic effects of flame retardant PBDE-47 on the clam Chamelea gallina (Linnaeus, 1758

Directory of Open Access Journals (Sweden)

Salvatora Angela Angioni

2013-03-01

Full Text Available The purpose of the study is to evaluate the effects of 2,2',4,4'-tetrabromodiphenylether (PBDE-47 on the Chamelea gallina clam (according to current commercial regulations: Venus gallina. PBDEs, which are used as flame retardants in various industrial products, are classed as hazardous substances by Directive 2011/65/EU. They are bioaccumulative compounds, considered to be endocrine disruptors, genotoxic, neurotoxic and practically ubiquitous, and their concentration in the environment has considerably increased in recent years. The aim of this study is to establish the effects of PBDE-47 on Chamelea gallina: toxic power and any harmful effects on the gonads, bioaccumulation capacity in the tissues, and possible entry into the food chain. The research used 96-hour and 21-day experimental tests on clams housed in filtered seawater. The tests were preceded by a period of acclimatisation of the molluscs lasting five to seven days. The clams were fed on seaweed (Dunaliella tertiolecta. The choice of the toxic compound PBDE-47 was based on the high concentration, among the congeners of PBDE, found in some aquatic species. The study demonstrated that the concentration of the contaminant used did not alter the vital functions, cause significant levels of mortality or lead to evident alteration in the gonads of Chamelea gallina. However, the research demonstrated the bioaccumulation capacity of the bivalve mollusc, allowing PBDE-47 to enter the food chain.

Phylogenetic diversity and functional characterization of the Manila clam microbiota: a culture-based approach.

Science.gov (United States)

Leite, Laura; Jude-Lemeilleur, Florence; Raymond, Natalie; Henriques, Isabel; Garabetian, Frédéric; Alves, Artur

2017-09-01

According to the hologenome theory, the microbiota contributes to the fitness of the holobiont having an important role in its adaptation, survival, development, health, and evolution. Environmental stress also affects the microbiota and its capability to assist the holobiont in coping with stress factors. Here, we analyzed the diversity of cultivable bacteria associated with Manila clam tissues (mantle, gills, hemolymph) in two non-contaminated sites (Portugal and France) and one metal-contaminated site (Portugal). A total of 240 isolates were obtained. Representative isolates (n = 198) of the overall diversity were identified by 16S rDNA sequencing and subjected to functional characterization. Isolates affiliated with Proteobacteria, Actinobacteria, Firmicutes, and Bacteroidetes. Proteobacteria (mostly Pseudoalteromonadaceae and Vibrionaceae) were dominant in non-contaminated sites while Actinobacteria (mostly Microbacteriaceae) dominated in the metal-contaminated site. The main factor affecting the microbiota composition was contamination. No significant differences were observed between clam tissues and geographic regions. Several isolates tested positive for antibacterial activity, biofilm formation, protease, and siderophore production. The results show that the Manila clam harbors a diverse microbiota that may contribute to clam protection and overall fitness, as well as to its adaptation to stressful environments. In addition, the Manila clam microbiota is revealed as a promising source of novel probiotics with potential application in aquaculture.

Bitterness and Physichochemical Properties of Angelwing Clam (Pholas Orientalis) Hydrolysate

International Nuclear Information System (INIS)

Normah Ismail; Nurul Fasihah Razak

2016-01-01

Protein hydrolysates from angelwing clam were obtained by enzymatic hydrolysis using bromelain. The bitterness of hydrolysates was evaluated based on the degree hydrolysis (DH), sensory analysis, molecular weight distribution and functional group. By using 3 % of enzyme substrate ratio bromelain resulted in high DH value at 12.57 % when angelwing clam was hydrolysed for 2 hours. Sensory analysis showed that angelwing hydrolysate was bitter. Angelwing hydrolysate had molecular weight below 50 kDa. The lower molecular weight indicated that the protein has been degraded into smaller peptide chains which contribute to bitter taste. Moreover, the high peak of amine group in angelwing hydrolysate (3385.6 cm -1 ) suggested that bitterness exists. Angelwing hydrolysate had higher protein content, lower fat content and had good water holding capacity than the flesh. This result suggested that angelwing hydrolysate could be useful as food ingredient even though bitter taste developed after the hydrolysis. Thus, debittering should be considered in order to pave the way for full utilization of angelwing clam hydrolysate as a food ingredient. (author)

Impediment to symbiosis establishment between giant clams and Symbiodinium algae due to sterilization of seawater.

Science.gov (United States)

Kurihara, Takeo; Yamada, Hideaki; Inoue, Ken; Iwai, Kenji; Hatta, Masayuki

2013-01-01

To survive the juvenile stage, giant clam juveniles need to establish a symbiotic relationship with the microalgae Symbiodinium occurring in the environment. The percentage of giant clam juveniles succeeding in symbiosis establishment ("symbiosis rate") is often low, which is problematic for seed producers. We investigated how and why symbiosis rates vary, depending on whether giant clam seeds are continuously reared in UV treated or non treated seawater. Results repeatedly demonstrated that symbiosis rates were lower for UV treated seawater than for non treated seawater. Symbiosis rates were also lower for autoclaved seawater and 0.2-µm filtered seawater than for non treated seawater. The decreased symbiosis rates in various sterilized seawater suggest the possibility that some factors helping symbiosis establishment in natural seawater are weakened owing to sterilization. The possible factors include vitality of giant clam seeds, since additional experiments revealed that survival rates of seeds reared alone without Symbiodinium were lower in sterilized seawater than in non treated seawater. In conclusion, UV treatment of seawater was found to lead to decreased symbiosis rates, which is due possibly to some adverse effects common to the various sterilization techniques and relates to the vitality of the giant clam seeds.

Aquaculture Land-Use Policy: The Case of Clam Farming in Thaibinh Province, Vietnam

Directory of Open Access Journals (Sweden)

Thi Thu Hang NGO

2016-12-01

Full Text Available Policy-making and enforcement remains centralized in Vietnam. Policies have been formulated with less scientific and public justification, thus being largely bureaucratic and infeasible, and in many cases, they have created plagues for people at the grass-roots levels. This article focuses on the implementation of policies related to intertidal land-use and supports for clam farming in the Thaibinh province as a case study to explore the impacts of policies on clam farming and farmers. During the period of 2011–2013, provincial policies on intertidal land allocation and technical and financial supports had boosted clam farming development in the province to a surprising extent. Rapid expansion of the clam farming area has created significant consequences for the farming sector, as well as farmer’s lives. However, for the same provincial policies, but with different enforcement, different farming outcomes for clam farmers in the three study communes have resulted. Where farmers had more of a voice and choice in bidding for the intertidal areas they preferred, they faced fewer problems. It is, thus, suggested that a more decentralized policy-making and enforcement are needed, in which more scientific assessment and farmer participation are required to not only make government policy more successful in supporting farmers and achieving their expected outcomes, but also to provide farmers with more room to make their own farming decisions from which farming and marketing risks could be mitigated.

Occurrence of antibiotics in mussels and clams from various FAO areas.

Science.gov (United States)

Chiesa, Luca Maria; Nobile, Maria; Malandra, Renato; Panseri, Sara; Arioli, Francesco

2018-02-01

Filter feeders, like mussels and clams, are suitable bioindicators of environmental pollution. These shellfish, when destined for human consumption, undergo a depuration step that aims to nullify their pathogenic microorganism load and decrease chemical contamination. Nevertheless, the lack of contamination by drugs may not be guaranteed. Antimicrobials are a class of drugs of particular concern due to the increasing phenomenon of antibiotic resistance. Their use in breeding and aquaculture is a major cause of this. We developed a multiclass method for the HPLC-MS/MS analysis of 29 antimicrobials, validated according to the Commission Decision 2002/657/UE guidelines, and applied it to 50 mussel and 50 clam samples derived from various Food and Agricultural Organisation marine zones. The results obtained, indicate a negligible presence of antibiotics. Just one clam sample showed the presence of oxytetracycline at a concentration slightly higher than the European Union Maximum residue limit set for fish. Copyright © 2017. Published by Elsevier Ltd.

Further development of the SEA-Clam wave energy converter

Energy Technology Data Exchange (ETDEWEB)

Bellamy, N.W.; Peatfield, A.M.

1984-04-01

The final design of the SEA-Clam as a unit for a large 2 GW scheme has been described. This is the leading wave energy device arising out of the UK National Wave Energy Program and is seen as having the greatest potential for further development particularly for smaller scale applications. The small scale market for wave energy is examined and the design and cost parameters evaluated for the 250 kW to 1000 kW range of SEA-Clam units. Building a demonstration prototype rated at 650 kW and producing an annual average output of 250 kW is identified as the next step towards the commercial exploitation of wave energy.

Impediment to Symbiosis Establishment between Giant Clams and Symbiodinium Algae Due to Sterilization of Seawater

Science.gov (United States)

Kurihara, Takeo; Yamada, Hideaki; Inoue, Ken; Iwai, Kenji; Hatta, Masayuki

2013-01-01

To survive the juvenile stage, giant clam juveniles need to establish a symbiotic relationship with the microalgae Symbiodinium occurring in the environment. The percentage of giant clam juveniles succeeding in symbiosis establishment (“symbiosis rate”) is often low, which is problematic for seed producers. We investigated how and why symbiosis rates vary, depending on whether giant clam seeds are continuously reared in UV treated or non treated seawater. Results repeatedly demonstrated that symbiosis rates were lower for UV treated seawater than for non treated seawater. Symbiosis rates were also lower for autoclaved seawater and 0.2-µm filtered seawater than for non treated seawater. The decreased symbiosis rates in various sterilized seawater suggest the possibility that some factors helping symbiosis establishment in natural seawater are weakened owing to sterilization. The possible factors include vitality of giant clam seeds, since additional experiments revealed that survival rates of seeds reared alone without Symbiodinium were lower in sterilized seawater than in non treated seawater. In conclusion, UV treatment of seawater was found to lead to decreased symbiosis rates, which is due possibly to some adverse effects common to the various sterilization techniques and relates to the vitality of the giant clam seeds. PMID:23613802

The Clam-Gallas Palace in Prague: Emblematic Architecture?

Czech Academy of Sciences Publication Activity Database

Konečný, Lubomír

2010-01-01

Roč. 18, - (2010), s. 1-10 ISSN 0885-968X Institutional research plan: CEZ:AV0Z80330511 Keywords : Clam-Gallas Palace * Johann Bernhard Fischer von Erlach * architecture * emblem s * imprints Subject RIV: AL - Art, Architecture, Cultural Heritage

Direct contribution of clams (Ruditapes philippinarum) to benthic fluxes, nitrification, denitrification and nitrous oxide emission in a farmed sediment

Science.gov (United States)

Welsh, David T.; Nizzoli, Daniele; Fano, Elisa A.; Viaroli, Pierluigi

2015-03-01

The influence of the manila clam (Ruditapes philippinarum) on N-cycle processes, and oxygen and nutrient fluxes in a farmed sediment was investigated using a multiple core incubation approach and parallel incubations of individual clams. Clam population/biomass density varied ∼8-fold between cores and all sediment-water column solute (O2. N2, N2O, NH4+, NOX and DIN) fluxes and benthic process (N-regeneration, nitrification and denitrification) rates were strongly and significantly correlated with clam density/biomass. Isolated clams exhibited high rates of respiration, N-excretion, nitrification and denitrification of 2050 ± 70, 395 ± 49, 201 ± 42 and 235 ± 40 nmol individual-1 h-1, respectively. The direct contribution of the clams and their associated microbiota to benthic processes was estimated by multiplying the per individual rates by the number of clams in each incubated core. The clams on average directly accounted for 64-133% of total rates of sediment oxygen demand, N-regeneration, nitrification and denitrification, indicating that they regulated processes primarily through their own metabolic activity and that of bacteria that colonise them. Clams and the farmed sediments were significant sources of the greenhouse gas N2O, but this was primarily due to their high nitrification and denitrification rates, rather than high specific N2O yields, as N2O emissions represented farmed sediments had a high denitrification efficiency of 67 ± 10%, but this ecosystem service came at the environmental cost of increased N-regeneration and N2O emission rates. The measured N2O emissions indicate that bivalve aquaculture may be a significant source of N2O. It is therefore recommended that N2O emissions should be included in the impact assessments of current and future bivalve-farming projects.

Gene transcription and biomarker responses in the clam Ruditapes philippinarum after exposure to ibuprofen

Energy Technology Data Exchange (ETDEWEB)

Milan, Massimo; Pauletto, Marianna; Patarnello, Tomaso; Bargelloni, Luca [Department of Comparative Biomedicine and Food Science, University of Padova, Viale dell' Universita 16, Legnaro (Padova) (Italy); Marin, Maria Gabriella [Department of Biology, University of Padova, Via Ugo Bassi 58/B, 35131 Padova (Italy); Matozzo, Valerio, E-mail: matozzo@bio.unipd.it [Department of Biology, University of Padova, Via Ugo Bassi 58/B, 35131 Padova (Italy)

2013-01-15

Pharmaceuticals are a class of emerging environmental contaminants that continuously enter aquatic environments. Presently, little information is available about the effects of these substances on non-target organisms, such as bivalves. We investigated the effects of ibuprofen (IBU) on the clam Ruditapes philippinarum. Clams were exposed for 1, 3, 5 and 7 days to 0, 100 and 1000 {mu}g IBU/L, and established biomarker responses (haemolymph lysozyme, gill acetylcholinesterase and digestive gland superoxide dismutase activities) as well as digestive gland transcriptome were evaluated. A two-way ANOVA revealed significant effects of both 'IBU concentration' and 'exposure duration' on biomarker responses. Overall, the enzyme activities were generally lower in IBU-exposed clams than in controls. Although limited knowledge of the mollusc transcriptome makes it difficult to interpret the effects of IBU on clams, the gene transcription analysis using DNA microarrays enabled the identification of the putative molecular mode of action of the IBU. The functional analysis of differentially transcribed genes suggests that IBU can interfere with various signalling pathways in clams, such as arachidonic acid metabolism, apoptosis, peroxisomal proliferator-activated receptors, and nuclear factor-kappa B. In addition, several genes involved in the metabolism of xenobiotics (e.g., glutathione S-transferase, sulfotransferase, cytochrome P450) were also found to be significantly affected by IBU exposure. In summary, the integrated approach of gene transcription analysis and biomarker responses facilitated the elucidation of the putative mechanisms of action of IBU in non-target species.

Gene transcription and biomarker responses in the clam Ruditapes philippinarum after exposure to ibuprofen

International Nuclear Information System (INIS)

Milan, Massimo; Pauletto, Marianna; Patarnello, Tomaso; Bargelloni, Luca; Marin, Maria Gabriella; Matozzo, Valerio

2013-01-01

Pharmaceuticals are a class of emerging environmental contaminants that continuously enter aquatic environments. Presently, little information is available about the effects of these substances on non-target organisms, such as bivalves. We investigated the effects of ibuprofen (IBU) on the clam Ruditapes philippinarum. Clams were exposed for 1, 3, 5 and 7 days to 0, 100 and 1000 μg IBU/L, and established biomarker responses (haemolymph lysozyme, gill acetylcholinesterase and digestive gland superoxide dismutase activities) as well as digestive gland transcriptome were evaluated. A two-way ANOVA revealed significant effects of both “IBU concentration” and “exposure duration” on biomarker responses. Overall, the enzyme activities were generally lower in IBU-exposed clams than in controls. Although limited knowledge of the mollusc transcriptome makes it difficult to interpret the effects of IBU on clams, the gene transcription analysis using DNA microarrays enabled the identification of the putative molecular mode of action of the IBU. The functional analysis of differentially transcribed genes suggests that IBU can interfere with various signalling pathways in clams, such as arachidonic acid metabolism, apoptosis, peroxisomal proliferator-activated receptors, and nuclear factor-kappa B. In addition, several genes involved in the metabolism of xenobiotics (e.g., glutathione S-transferase, sulfotransferase, cytochrome P450) were also found to be significantly affected by IBU exposure. In summary, the integrated approach of gene transcription analysis and biomarker responses facilitated the elucidation of the putative mechanisms of action of IBU in non-target species.

Uptake and release of paralytic shellfish toxins by the clam Ruditapes decussatus exposed to Gymnodinium catenatum and subsequent depuration.

Science.gov (United States)

Botelho, Maria João; Vale, Carlos; Grilo, Rita Velez; Ferreira, João Gomes

2012-06-01

A laboratory experiment was performed with the clam Ruditapes decussatus, fed with the toxic dinoflagellate Gymnodinium catenatum and the non-toxic algae Isochrysis galbana (14 days) and subsequently only with I. galbana (15 days). Individual paralytic shellfish toxins were determined by LC-FLD in G. catenatum cells, whole clam tissues, and particulate organic matter (POM) produced by clams. The toxins dcSTX and dcGTX2 + 3 in the algae were less abundant than C1 + 2 and B1, but were predominant in clams during both the exposure and depuration phases. The toxin dcNEO was only detected in clams during a short period, indicating conversion from other compounds. The toxin composition of the POM indicated the export of dcSTX as faeces or pseudo-faeces along the entire experiment (2.5-14 nmol mg(-1)), B1 was present in a short period of the exposure and C1 + 2 and dcGTX2 + 3 absent. A mass balance calculation indicated that approximately 95% of C1 + 2 and 85% of B1 supplied to the clams were converted into other toxins or lost in solution. Conversely, the net gain of 512, 61 and 31 nmol for dcSTX, dcGTX2 + 3 and dcNEO, respectively, suggests the conversion from other assimilated compounds by clams during exposure and depuration phases. Copyright © 2012 Elsevier Ltd. All rights reserved.

Low cycle fatigue properties of CLAM steel at 450 °C and 550 °C

Energy Technology Data Exchange (ETDEWEB)

Zhao, Yanyun; Zhai, Xiangwei; Liu, Shaojun, E-mail: shaojun.liu@fds.org.cn

2016-11-15

Highlights: • Low cycle fatigue properties of CLAM steel were investigated at 450 °C and 550 °C. • CLAM steel showed the continuous softening up to fail failure under cyclic loading. The degree of softening increased with increasing temperature. • Dislocation density decrease and subgrain coarsening during the test process were the possible reasons for the cyclic softening of the CLAM steel. - Abstract: The low cycle fatigue behavior of China Low Activation Martensitic (CLAM) steel has been studied using a constant strain rate of 8 × 10{sup −3}/s with the strain amplitudes ranging from 0.3% to 0.8% at 450 °C and 550 °C. Cyclic stress response showed a gradual softening until complete failure. The fatigue life decreased with increasing test temperature, and the effect of temperature on fatigue life was more pronounced at lower strain amplitudes. The cyclic deformation behavior at different temperatures has been analyzed according to the hysteresis loop, and the mechanism of cyclic softening was interpreted in view of the changes taking place in dislocation density and lath structures. Evaluation of low cycle fatigue properties of CLAM steel at 450 °C and 550 °C can help in design of the Chinese Test Blanket Module (TBM) for the International Thermonuclear Experimental Reactor (ITER) and a future fusion power plant.

Toxicological effects of paracetamol on the clam Ruditapes philippinarum: exposure vs recovery.

Science.gov (United States)

Nunes, Bruno; Nunes, Joana; Soares, Amadeu M V M; Figueira, Etelvina; Freitas, Rosa

2017-11-01

Exposure of wild organisms to anthropogenic substances never follows a definite time-course and pulsed events can often determine biological responses to such chemicals, confounding the interpretation of toxicological data. This is the case of specific chemicals such as pharmaceutical drugs, which are commonly released by sewage systems into sensitive areas, including estuaries. The presence and amount of these chemicals in the wild can be modulated by events such as dilution due to heavy rain, floods, or by varying patterns of domestic water use (daily vs. seasonal). The present study aimed to obtain additional data about the toxicity of paracetamol towards the marine clam species Ruditapes philippinarum, following realistic modes of exposure. Thus, the toxicity assessment was made after an acute exposure to different concentrations of paracetamol, followed by a recovery period. The adopted toxicological endpoints included energy-related parameters (glycogen content, GLY; protein content, PROT; electron transport system activity, ETS), activity of antioxidant and biotransformation enzymes (superoxide dismutase, SOD; glutathione peroxidase, GPx; Glutathione-S-transferases, GSTs), levels of reduced glutathione (GSH), neurotoxicity (cholinesterases activity, ChEs), and indicators of oxidative damage (lipid peroxidation, LPO). The here obtained results showed an increase in SOD and GPx activities after exposure. In organisms exposed to the highest concentration tested it was also possible to observe a significant increase in GSTs activity. However, these alterations in the antioxidant defence system were not able to prevent the occurrence of oxidative stress in exposed organisms. Furthermore, exposure to paracetamol induced neurotoxicity in clams, with a concentration-dependent ChEs inhibition along the exposure concentrations. Exposure to paracetamol also led to an increase of GLY content which resulted from metabolic activity depression along the increasing exposure

Growth and Histological Effects to Protothaca staminea (Littleneck Clam) of Long-Term Exposure to Chlorinated Sea Water

Energy Technology Data Exchange (ETDEWEB)

Gibson, C. I.; Hillman, A. E.; Wilkinson, P.; Woodruff, D. L.

1980-08-01

There has been considerable concern about the potential for long-term effects to marine organisms from chlorinated sea water. As part of a larger study to investigate the effects of materials resulting from seawater chlorination on marine organisms, groups of littleneck clams, Protothaca staminea, were exposed to sea water that had been chlorinated. Two experiments were conducted. In one test, groups of littleneck clams were exposed to dilutions of chlorinated sea water that had average chlorine produced oxidant (CPO) concentrations of 16 {micro}g/l or less. In the second test, groups of clams were exposed to chlorinated seawater-unchlorinated seawater mixtures that had target CPO concentrations of 0, 6, 12, 25, 50 and 100 {micro}g/l. In the first experiment, length measurements were made on all clams at approximately one-month intervals for three months. In the second test, length, weight, depth, width and edge etching were used to measure growth, and subsamples were harvested and measured at one-month intervals. In addition, clams were preserved for histological examination. The clams in the first experiment all had negative growth. In the second test, growth was inhibited under all conditions through the first four months of exposure. During the last four months, there was positive signs of growth at the 0, 6 and 12 {micro}g/l CPO test conditions. Histological examination indicates that P. staminea does not adapt well to being held in aquaria. Most clams, tram all test and control conditions, showed evidence of necrosis at one month. This condition seemed to improve with longer exposure at lower CPO concentrations but persisted at CPO concentrations of 25 {micro}g/l and higher. Other histological effects were apparent at the higher exposure concentrations as the length of exposure increased.

Purification and Characterization of Hemagglutinating Proteins from Poker-Chip Venus (Meretrix lusoria and Corbicula Clam (Corbicula fluminea

Directory of Open Access Journals (Sweden)

Chin-Fu Cheng

2012-01-01

Full Text Available Hemagglutinating proteins (HAPs were purified from Poker-chip Venus (Meretrix lusoria and Corbicula clam (Corbicula fluminea using gel-filtration chromatography on a Sephacryl S-300 column. The molecular weights of the HAPs obtained from Poker-chip Venus and Corbicula clam were 358 kDa and 380 kDa, respectively. Purified HAP from Poker-chip Venus yielded two subunits with molecular weights of 26 kDa and 29 kDa. However, only one HAP subunit was purified from Corbicula clam, and its molecular weight was 32 kDa. The two Poker-chip Venus HAPs possessed hemagglutinating ability (HAA for erythrocytes of some vertebrate animal species, especially tilapia. Moreover, HAA of the HAP purified from Poker-chip Venus was higher than that of the HAP of Corbicula clam. Furthermore, Poker-chip Venus HAPs possessed better HAA at a pH higher than 7.0. When the temperature was at 4°C–10°C or the salinity was less than 0.5‰, the two Poker-chip Venus HAPs possessed better HAA compared with that of Corbicula clam.

Elimination of Escherichia coli and Salmonella in Clam by Using Zeolite in a Station of Depuration.

Science.gov (United States)

Gdoura, Morsi; Sellami, Hanen; Khannous, Lamia; Ketata, Najib; Neila, Idriss Ben; Traore, Al Ibrahim; Chekir, Zouhair; Gdoura, Radhouane

2017-09-01

  The application of natural zeolite for water and wastewater treatment has been carried out and is still a promising technique in environmental cleaning processes. Natural zeolite can be used to improve the purification process of clams (Ruditapes decussatus). Thus, our study aimed at improving the clam purification system in order to reduce Escherichia coli and eliminate Salmonella in samples artificially contaminated with this bacterium using a natural zeolite to replace the biological filter. The results showed that zeolite used in a depuration system improved the clam purification process. Moreover, natural zeolite exhibited high performance in the adsorption of bacteria and allowed to reduce the Escherichia coli abundance in 24 h, thus ensuring purified clams conformity with the ISO 16649-3 standard. These results indicate the beneficial effects of using zeolite in the adsorption of bacteria and the reduction in the abundance of Escherichia coli and set the Salmonella from marine organisms.

Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

For the application of photon to industrial technologies, in particular, a hard photon technology was surveyed which uses photon beams of 0.1-200nm in wavelength. Its features such as selective atom reaction, dense inner shell excitation and spacial high resolution by quantum energy are expected to provide innovative techniques for various field such as fine machining, material synthesis and advanced inspection technology. This wavelength region has been hardly utilized for industrial fields because of poor development of suitable photon sources and optical devices. The developmental meaning, usable time and issue of a hard photon reduction lithography were surveyed as lithography in ultra-fine region below 0.1{mu}m. On hard photon analysis/evaluation technology, the industrial use of analysis, measurement and evaluation technologies by micro-beam was viewed, and optimum photon sources and optical systems were surveyed. Prediction of surface and surface layer modification by inner shell excitation, the future trend of this process and development of a vacuum ultraviolet light source were also surveyed. 383 refs., 153 figs., 17 tabs.

In situ studies with Asian clams (Carbacula fluminea) detect acid mine drainage and nutrient inputs in low-order streams

International Nuclear Information System (INIS)

Soucek, D. J.; Schmidt, T. S.; Cherry, D. S.

2001-01-01

This study evaluates the correlation between transplanted Asiatic clam and indigenous community responses to acid mine drainage and nutrient loading in first-to-third-order streams, by comparing the toxicological endpoints of clam survival and growth with benthic macro-invertebrate community indices as community responses to both acid mine drainage and nutrient loading. Clam survival was found to be positively correlated with water column pH and negatively correlated with conductivity and metal concentrations. There was also a positive correlation with the relative abundance of the macro-invertebrate Ephemeroptera, the most sensitive taxonomic group, to acid mine drainage in this watershed. No correlation was found between clam growth and acid mine drainage inputs, but there was evidence of positive correlation with nitrate concentrations and the relative abundance of collector-filterer functional feeding groups. These results suggest that clam growth is related to nutrient levels and accurately reflect benthic macro-invertebrate responses to nutrient loading. 28 refs., 5 tabs., 1 fig

Development and validation of 89 novel expressed sequence tag-derived microsatellite markers in blood clam, Tegillarca granosa

Science.gov (United States)

Teng, Shuangshuang; Fang, Jun; Cai, Yilong; Chai, Xueliang; Xiao, Guoqiang

2017-06-01

Blood clam, Tegillarca granosa, is an important shellfish in Chinese mariculture industry. Investigative research in this species, such as genetic linkage mapping, requires a large panel of molecular markers. In present study, a total of 89 polymorphic microsatellite markers were developed in T. granosa using the sequence database of Life Sciences Technology 454 next generation sequencing technology. All 89 loci were characterized in 20 individual clams from a natural population inhabiting Yueqing Gulf, Zhejiang Province, China. The number of alleles per polymorphic locus varied between 2 and 15, while the observed heterozygosity, expected heterozygosity and polymorphic information content varied between 0.000 and 1.000, 0.102 and 0.921, and 0.048 and 0.886, respectively. Of the 89 loci identified, 32 loci deviated significantly from Hardy-Weinberg equilibrium following Bonferroni correction. Thirty nine markers, which were shown to be polymorphic in a full-sibling family, were tested in Mendelian segregations. As expected, 32 loci were co-dominantly segregated in a Mendelian fashion. These novel developed microsatellite markers represent useful research tools for investigation of population genetic structure and genetic diversity in this species.

Allozyme electrophoresis as a tool for distinguishing different zooxanthellae symbiotic with giant clams

Science.gov (United States)

Baillie, B. K.; Monje, V.; Silvestre, V.; Sison, M.; Belda-Baillie, C. A.

1998-01-01

The taxonomy of zooxanthellae in marine invertebrate symbioses is not well understood owing mainly to their lack of reliable morphological differences. Nevertheless, previous work using protein and DNA electrophoreses has set the stage for advancing our taxonomic understanding of cnidarian zooxanthellae. Here we present the use of allozymes as genetic markers for distinguishing algal isolates from tridacnid hosts. Zooxanthellae from seven Tridacna and Hippopus species were isolated and maintained in axenic clonal cultures over many generations. Of 16 enzyme systems, α- and β-esterase (EST), esterase-F (EST-F), glucose phosphate isomerase (GPI), and malate dehydrogenase (MDH) were found suitable polymorphic markers of genetic differences among clonal cultures. Of 39 clonal isolates, 97% were found to be genetically distinguishable. This high extent of genetic variation in zooxanthellae within and between clam species was unexpected, and is difficult to explain based solely on the general notion of asexual reproduction in symbiotic zooxanthellae. Our results are also consistent with the occurrence of sexual reproduction in clam zooxanthellae. The close genetic similarity of the symbionts of Tridacna gigas, the largest and fastest-growing clam species, and the difficulty of initiating their clonal cultures in the given nutrient medium, compared with the symbionts of other clam species, are further indicative of possibly distinct algal symbionts in T. gigas. These findings are discussed in light of current taxonomic understanding of these organisms.

Reproduction and recruitment patterns of the surf clam Donax serra ...

African Journals Online (AJOL)

Reproduction and recruitment patterns of the surf clam Donax serra (Bivalvia, Donacidae) on two ... Keywords: condition index, Donax serra, histology, Namibia, recruitment, reproduction, sandy beach ecology ... AJOL African Journals Online.

Effects of clam size, food type, sediment characteristic, and seawater carbonate chemistry on grazing capacity of Venus clam Cyclina sinensis (Gmelin, 1791)

Science.gov (United States)

Lin, Tingting; Zhou, Kai; Liu, Xin; Lai, Qifang; Zhang, Dong; Shi, Liyan

2017-09-01

Aquaculture in saline-alkaline water has a major problem: microalgal blooming causes the pH of water to increase dramatically, thereby causing damage to the reared organisms. To solve this problem, we set out to find a candidate filter-feeding bivalve species suitable for saline-alkaline water to graze on microalgae and to control the pH. In the current study, we investigated the effect of carbonate alkalinity (CA, 2.5, 10.0, and 20.0 meq/L) and pH (8.0, 8.5, and 9.0) on the grazing capacity (GC) of the clam Cyclina sinensis. Additionally, the effect of clam size (small, medium, and large) and microalgae species ( Nannochloropsis oculata, Chaetoceros müelleri, and Isochrysis galbana), and the effect of bottom sediment characteristic (mud, sandy mud, and muddy sand) and thickness (3 and 6 cm) were analyzed as well. The results show that the GC on I. galbana was the highest and small size had the maximum GC/ W ( W: wet weight including body and shells). No significant differences were observed between sediment type and thickness. Regarding CA and pH, a significant decrease in GC by the pH or by their interaction was found. The GC of C. sinensis was not greatly reduced in the treatments of pH≤8.5 and CA≤20.0, and also not affected by bottom sediment type, indicating that this clam is capable to manage microalgal concentrations and might be a candidate species for pH reduction in saline-alkaline water ponds.

Bioaccumulation of hydrocarbons derived from terrestrial and anthropogenic sources in the Asian clam, Potamocorbula amurensis, in San Francisco Bay estuary

Science.gov (United States)

Pereira, Wilfred E.; Hostettler, Frances D.; Rapp, John B.

1992-01-01

An assessment was made in Suisun Bay, California, of the distributions of hydrocarbons in estuarine bed and suspended sediments and in the recently introduced asian clam, Potamocorbula amurensis. Sediments and clams were contaminated with hydrocarbons derived from petrogenic and pyrogenic sources. Distributions of alkanes and of hopane and sterane biomarkers in sediments and clams were similar, indicating that petroleum hydrocarbons associated with sediments are bioavailable to Potamocorbula amurensis. Polycyclic aromatic hydrocarbons in the sediments and clams were derived mainly from combustion sources. Potamocorbula amurensis is therefore a useful bioindicator of hydrocarbon contamination, and may be used as a biomonitor of hydrocarbon pollution in San Francisco Bay.

Baseline of organotin pollution in fishes, clams, shrimps, squids and crabs collected from the west coast of India

Digital Repository Service at National Institute of Oceanography (India)

Jadhav, S.; Bhosale, D.; Bhosle, N.B.

is available. The present study was planned to assess organotin contamination levels in edible marine organisms collected from the fish markets of Goa, Karwar and Mumbai, the west coast of India. The sampling locations: Goa (15.5ºN, 73.9ºE), Karwar (14.8º... of Karwar is around 36,000 tonnes. Mumbai coast is about 140 km long. Mumbai is among busiest harbours on the west coast of India is known for industrial pollution. The fishes, clams, crabs and squids and shrimps were collected from local fish markets...

The clam (Chamelea gallina: evaluation of the effects of solids suspended in seawater on bivalve molluscs

Directory of Open Access Journals (Sweden)

Salvatora Angela Angioni

2010-03-01

Full Text Available The study was designed to evaluate the effects of solids in suspension in seawater on clams (Chamelea gallina. The aim was to investigate the possible correlation between the widespread deaths of clams in the coastal waters of the central and northern Adriatic in the last five years and increased concentrations of solids in suspension. The research involved conducting 96-hour tests on clams farmed in aquariums containing filtered seawater. The tests were preceded by a 7-day adaptation stage to allow the molluscs to acclimatise. During this period, the clams were fed on unicellular seaweed (Dunaliella tertiolecta. The molluscs were exposed to particles of solids in suspension consisting of pools of silica gel (SiO2 granules of various sizes, similar to those constituting silt, whose presence and suspension in the sea considerably increase after heavy rain and heavy seas. The study established that the number of deaths caused by solids suspended in seawater at the concentrations used in the tests was not statistically significant.

Influence of particle characteristics and organic matter content on the bioavailability and bioaccumulation of pyrene by clams

International Nuclear Information System (INIS)

Verrengia Guerrero, N.R.; Taylor, M.G.; Wider, E.A.; Simkiss, K.

2003-01-01

An experimental model with artificial particles and humic acids describes bioavailability of sediment-bound pyrene to clams. - Hydrophobic chemicals are known to associate with sediment particles including those from both suspended particulate matter and bottom deposits. The complex and variable composition of natural particles makes it very difficult therefore, to predict the bioavailability of sediment-bound contaminants. To overcome these problems we have previously devised a test system using artificial particles, with or without humic acids, for use as an experimental model of natural sediments. In the present work we have applied this experimental technique to investigate the bioavailability and bioaccumulation of pyrene by the freshwater fingernail clam Sphaerium corneum. The uptake and accumulation of pyrene in clams exposed to the chemical in the presence of a sample of natural sediment was also investigated. According to the results obtained, particle surface properties and organic matter content are the key factors for assessing the bioavailability and bioaccumulation of pyrene by clams

Analysis of banned veterinary drugs and herbicide residues in shellfish by liquid chromatography-tandem mass spectrometry (LC/MS/MS) and gas chromatography-tandem mass spectrometry (GC/MS/MS)

International Nuclear Information System (INIS)

Chang, Geng-Ruei; Chen, Hui-Shan; Lin, Feng-Yi

2016-01-01

Seafood safety is a crucial public health concern for consumers. In this study, we applied a validated method to analyze the residue of banned veterinary drugs in shellfish, namely chloramphenicol, malachite green, leucomalachite green, and nitrofuran metabolites; additionally, the QuEChERS method was employed to detect 76 herbicides by LC/MS/MS and GC/MS/MS. In total, 42 shellfish samples, which included hard clams, freshwater clams, and oysters, were collected from aquafarms and production areas in Taiwan during 2012. Our results revealed 3.8 ng/g of chloramphenicol in one hard clam, 19.9–32.1 ng/g of ametryn in two hard clams, 16.1–60.1 ng/g of pendimethalin in four hard clams, and 17.0 ng/g of mefenacet in one oyster, indicating that 19.1% of the samples contained residues from banned veterinary drugs and pesticides. These data can be used to monitor the residue of veterinary drugs and pesticides in aquatic organisms and as a reference for food safety. - Highlights: • A certified method was employed for analyzing residues of banned veterinary drugs and herbicides in shellfish samples. • The trace levels of chloramphenicol, ametryn, pendimethalin were detected in hard clam samples. • For ensuring food safety, continual monitoring of aquatic products is necessary.

Effect of post-weld heat treatment on the mechanical properties of CLAM/316L dissimilar joint

Energy Technology Data Exchange (ETDEWEB)

Zhang, Junyu [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); University of Science and Technology of China, Hefei, Anhui 230027 (China); Huang, Bo [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); Wu, Qingsheng, E-mail: qingsheng.wu@fds.org.cn [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); Li, Chunjing; Huang, Qunying [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China)

2015-11-15

Highlights: • Dissimilar joints between CLAM and 316L steels welded by TIG were investigated. • After PWHTs, the hardening in HAZ on the CLAM steel side decreased remarkably. • Tempering at 740 °C for 2 h was considered as the preferable treatment rule. - Abstract: Dissimilar welding between China low activation martensitic (CLAM) steel and 316L austenitic stainless steel was investigated to achieve the reliable connection between test blanket modules (TBMs) and piping system in the international thermonuclear experimental reactor (ITER). The dissimilar joints were welded by tungsten inert gas (TIG) welding process with a filler material type-309. In order to stabilize the microstructure and improve the strength and toughness, post-weld heat treatments (PWHTs) of tempering at 740 °C, 780 °C and 820 °C, respectively, for 2 h were performed. The microstructure observation showed that tempering at 740 °C for 2 h was the preferable PWHT rule in this work. After the treatment, the hardening in heat affected zone (HAZ) on the CLAM steel side decreased remarkably. The tensile strength of the joint was roughly the same as that of the base metal. The impact toughness of HAZ on the CLAM steel side was 77% of that of the base metal. The absorbed energy of HAZ of 316L steel decreased by 93 J, and that of weld metal (WM) was 110 J after the treatment.

Corrosion behavior of CLAM steel weldment in flowing liquid Pb-17Li at 480 °C

International Nuclear Information System (INIS)

Chen Xizhang; Shen Zheng; Chen Xing; Lei Yucheng; Huang Qunying

2011-01-01

Highlights: ► The research shows that the CLAM steel weldment have its own corrosion mechanism in liquid Pb-17Li alloy. The basic rule of the corrosion behaviour of weldments is that the coorosion rate decreases obviously with the increasing of exposed time. ► The weight loss of CLAM steel weldment is far higer than the base metal after exposed to Pb-17Li alloy. Corrosion has little effects on elements of weldment sample surfaces. And an easier corrosion area in the weld joint are found. ► A simple presumably corrosion behavior model is established. The model demonstrate that the easier corroded area will be formed when the direction of martensite laths form small-angle with the specimen surface, The easy corrosion area is the martensite lath area lack of Cr and distributes like laths, the cross-section area is 1 μm 2 to 4 μm 2, the existence of the easier corrosion area is one of the reasons that lead to the difference of the corrosion rate. - Abstract: CLAM (China Low Activation Martensitic) steel is considered as one of the candidate structural materials in liquid LiPb blanket concepts. Welding is one of the essential technologies for its practical application, CLAM steel weldment shows a great difference with base metal due to the effect of welding thermal cycle. In order to investigate the corrosion behavior and mechanism of CLAM weldments in liquid Pb-17Li, the experiments were performed by exposing the TIG weldment samples in flowing LiPb at 480 °C. The weight loss test of exposed specimens show that in 500 h, 1000 h dynamic conditions, corrosion resistance of CLAM steel weldment is poor, SEM analysis shows that the thicker martensite lath in weld area lead to higher corrosion amount, EDS results show that the influence of corrosion on surface elements is small, and surface corrosion is even, EDX analysis shows that the penetration of Pb-17Li does not exist in the joint. With the increasing of exposure time, the corrosion rate decreases

Environmental context and trophic trait plasticity in a key species, the tellinid clam Macoma balthica L

DEFF Research Database (Denmark)

Törnroos, Anna; Nordström, M. C.; Aarnio, K.

2015-01-01

Species show varying levels of plasticity regarding morphology, physiology and behaviour in relation to their immediate environment, and several trait characteristics are habitat-dependent. Determining when and how the environmental context changes trait expression is of key importance...... for understanding the role of individual species for ecosystem functioning. The tellinid clam Macoma balthica can vary its feeding behaviour, shifting between deposit- and suspension-feeding. In order to study the context-dependency of this trophic plasticity in adult clams, we conducted an experiment assessing...... food uptake by using stable isotope signatures (delta C-13 and delta N-15). We transplanted individuals between and within two shallow bays differing in exposure (exposed sheltered) and sediment characteristics. Our results show that isotope signatures of clams differed between the two habitats...

Reparatory and Manufacturing Hard-Facing of Working Parts Made of Stainless Steels in Confectionary Industry

Directory of Open Access Journals (Sweden)

S. Rakic

2012-09-01

Full Text Available In this paper, for the sake of improving the reparatory hard-facing technology is especially analyzed reparatory hard-facing of tools for manufacturing compressed products in confectionary industry. Those products are being made of a mixture consisting of several powdery components, which is compressed under high pressure. In that way the connection between particles is realized, thus achieving certain hardness and strength of the confectionary product. The considered tool is made of high-alloyed stainless steel. The tool contains 30 identical working places. Besides the production process wear, on those tools, from time to time, appear mechanical damage on some of the products' shape punches, as cracks at the edges, where the products' final shapes are formed. Those damages are small, size wise, but they cause strong effect on the products' final shape. The aggravating circumstance is that the shape punch is extremely loaded in pressure, thus after the reparatory hard-facing, the additional heat treatment is necessary. Mechanical properties in the heat affected zone (HAZ are being leveled by annealing and what also partially reduces the residual internal stresses.

NMR-Based Metabolomic Investigations on the Differential Responses in Adductor Muscles from Two Pedigrees of Manila Clam Ruditapes philippinarum to Cadmium and Zinc

Directory of Open Access Journals (Sweden)

Junbao Yu

2011-09-01

Full Text Available Manila clam Ruditapes philippinarum is one of the most important economic species in shellfishery in China due to its wide geographic distribution and high tolerance to environmental changes (e.g., salinity, temperature. In addition, Manila clam is a good biomonitor/bioindicator in “Mussel Watch Programs” and marine environmental toxicology. However, there are several pedigrees of R. philippinarum distributed in the marine environment in China. No attention has been paid to the biological differences between various pedigrees of Manila clams, which may introduce undesirable biological variation in toxicology studies. In this study, we applied NMR-based metabolomics to detect the biological differences in two main pedigrees (White and Zebra of R. philippinarum and their differential responses to heavy metal exposures (Cadmium and Zinc using adductor muscle as a target tissue to define one sensitive pedigree of R. philippinarum as biomonitor for heavy metals. Our results indicated that there were significant metabolic differences in adductor muscle tissues between White and Zebra clams, including higher levels of alanine, glutamine, hypotaurine, phosphocholine and homarine in White clam muscles and higher levels of branched chain amino acids (valine, leucine and isoleucine, succinate and 4-aminobutyrate in Zebra clam muscles, respectively. Differential metabolic responses to heavy metals between White and Zebra clams were also found. Overall, we concluded that White pedigree of clam could be a preferable bioindicator/biomonitor in marine toxicology studies and for marine heavy metals based on the relatively high sensitivity to heavy metals.

Numerical simulation and experimental study of CLAM T-shapes for fusion applications by hydroforming

International Nuclear Information System (INIS)

Guo Xunzhong; Tao Jie; Liu Hongbing; Li Ming

2010-01-01

The integral hydroforming process to prepare CLAM T-shapes for fusion applications was evaluated by means of numerical simulation. The paper firstly investigated the effect of different paths on the protrusion height and distribution of thickness thinning rate of T-shapes. Then, it discussed that the friction coefficient between die and tube blank played an important role in manufacturing high quality T-shapes. Subsequently, the practical hydroforming was performed based on the simulation results with the aid of special lubrication coatings with friction coefficient 0.07. It is obviously indicated that the simulation results agree well with the experimental ones in geometry size and wall thickness distribution. The results indicate that the numerical simulation guides the practical hydroforming of CLAM tube effectively and determines the actual cold forming process parameters rapidly. The sound CLAM T-shapes with proper geometry size and thickness distribution can be obtained by the optimal hydroforming process. (authors)

Irradiation control of pathogenic bacteria and their growth during storage in short neckde clam

International Nuclear Information System (INIS)

Ju Hua; Wang Feng; Ha Yiming; Liu Shuliang

2009-01-01

The growth of pathogenic bacteria during storage and their D 10 values by irradiation in short necked clam were evaluated. The results showed that the D 10 values of the total bacteria count, E. coli, Vibrio parahaemolyticus in short necked clam at 0 degree C ∼ 4 degree C condition were 0.70, 0.56, 0.20kGy, respectively. The results showed that total bacteria count in vacuum packaged short necked clam sample was 4.46 log (CFU/g) after 3kGy 60 Co γ-irradiation and 28 days stored under 0 degree C ∼ 4 degree C, which could meet the requirement of related aquatic product standards, the E. coli and Vibrio parahaemolyticus would not detected after 0.4kGy irradiation and 7 days storage at 0 degree C ∼ 4 degree C. Therefore, micro-organisms could be controled effectively by 3 kGy irradiation and its shelf-life could extend to 28 days. (authors)

Evaluation of Using Caged Clams to Monitor Contaminated Groundwater Exposure in the Near-Shore Environment of the Hanford Site 300 Area

Energy Technology Data Exchange (ETDEWEB)

Larson, Kyle B.; Poston, Ted M.; Tiller, Brett L.

2008-01-31

The Asiatic clam (Corbicula fluminea) has been identified as an indicator species for locating and monitoring contaminated groundwater in the Columbia River. Pacific Northwest National Laboratory conducted a field study to explore the use of caged Asiatic clams to monitor contaminated groundwater upwelling in the 300 Area near-shore environment and assess seasonal differences in uranium uptake in relation to seasonal flow regimes of the Columbia River. Additional objectives included examining the potential effects of uranium accumulation on growth, survival, and tissue condition of the clams. This report documents the field conditions and procedures, laboratory procedures, and statistical analyses used in collecting samples and processing the data. Detailed results are presented and illustrated, followed by a discussion comparing uranium concentrations in Asiatic clams collected at the 300 Area and describing the relationship between river discharge, groundwater indicators, and uranium in clams. Growth and survival, histology, and other sources of environmental variation also are discussed.

Hard X-ray synchrotron light source for industrial and materials research applications

International Nuclear Information System (INIS)

Lehr, H.; Ehrfeld, W.; Moser, H.O.; Schmidt, M.; Herminghaus, H.

1992-01-01

The requirements for industrial production or for an industry-related analytical environment is demonstrated for the case of the proposed hard X-ray synchrotron light source. The source is intended to provide radiation mainly for deep X-ray lithography as part of the LIGA-process in microfabrication, and for analytical and diagnostic purposes in materials research and microtechnology. It offers up to 48 bending magnet beamlines with a characteristic wavelength of 2 A. An electron energy of 2.5 GeV and normal conducting magnets will be used. A FODO lattice with a beam emittance of 3x10 -7 m rad and four dispersion-free straight sections to accommodate insertion devices, injection elements and RF structures has been designed. (R.P.) 5 refs.; 4 figs.; 1 tab

Exploring the importance of soft and hard skills as perceived by IT internship students and industry: A gap analysis

Directory of Open Access Journals (Sweden)

Frederick Patacsil

2017-09-01

Full Text Available The research paper proposes a skills gap methodology that utilized the respondent experiences in the internship program to measure the importance of the Information Technology (IT skills gap as perceived by IT students and the industry. The questionnaires were formulated based on previous studies,  however,  was slightly modified, validated and pilot tested  to fit into the needs of the research.  Respondents  of this study were IT students enrolled in internship while industry respondents were the supervisors of the IT students in their respective company.  Internship IT students were selected since they have a strong background on the needs of the company based on their internship experience. The findings revealed that teamwork and communication skills are very important soft skills to be possessed by IT graduates  as perceived by the respondents.  Further, results reveal that there was no significant difference in the perception of the respondents in terms of the  importance of soft skills. However, this finding contradicts the results in the case of hard skills were in there was a big range of disagreement on the importance of hard skills.   IT students perceived that hard skills were very important while industry perceived hard skills were somewhat important. It is recognized that soft  skills are very important communication tool for a customer oriented industry and  that  it is essential to enhance the communication skills of IT students for their future employment. The study suggests that the university should target improvements of soft skills and specific personality development component in the curriculum.

Verification of the effect of surface preparation on Hot Isostatic Pressing diffusion bonding joints of CLAM steel

Energy Technology Data Exchange (ETDEWEB)

Zhao, Yanyun [University of Science and Technology of China, Hefei, Anhui 230027 (China); Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); Li, Chunjing, E-mail: chunjing.li@fds.org.cn [Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); Huang, Bo; Liu, Shaojun [Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); Huang, Qunying [University of Science and Technology of China, Hefei, Anhui 230027 (China); Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China)

2014-12-15

Hot Isostatic Pressing (HIP) diffusion bonding with CLAM steel is the primary candidate fabrication technique for the first wall (FW) of DFLL-TBM. Surface state is one of the key factors for the joints quality. The effect of surface state prepared with grinder and miller on HIP diffusion bonding joints of CLAM steel was investigated. HIP diffusion bonding was performed at 140 MPa and 1373 K within 3 h. The mechanical properties of the joints were investigated with instrumented Charpy V-notch impact tests and the microstructures of the joints were analyzed with scanning electron microscopy (SEM). The results showed that the milled samples with fine surface roughness were more suitable for CLAM steel HIP diffusion bonding.

Distribution of 137Cs activities in clams, Tivela mactroidea collected along the northern coast of Venezuela and the island of Margarita

International Nuclear Information System (INIS)

LaBrecque, J.J.; Alfonso, J.A.; Cordoves, P.R.

2007-01-01

Clam meats were obtained directly from the fishermen on the beaches in front of where the clams were collected at eight sites; seven along the northern coast of Venezuela and one on the northern coast of the island of Margarita (Venezuela). Marine sediments were also collected in the same corresponding areas as the clams. 137 Cs was determined both in clam meats and the marine sediments by high resolution gamma-ray spectrometry employing a hyperpure germanium detector. About 5 kg portions of clam meats were washed and dried in the laboratory, before 500 cm 3 volumes were transferred and weighed in the measuring containers. Similarly, 500 cm 3 volumes of marine sediments that were dried and ground to pass a 85 μm sieve were transferred to the measuring containers. The samples were counted for 150,000 seconds of real time. The 137 Cs activity of the clam meats ranged from -1 (our detection limit) to 0.36 Bq x kg -1 (dried weigh). These values are all within the range of values considered for environmental fallout from the nuclear weapons tests. Finally, all the values for the corresponding marine sediments were below our detection limit of 0.1 Bq x kg -1 of 137 Cs (dried weigh). (author)

Wave actions and topography determine the small-scale spatial distribution of newly settled Asari clams Ruditapes philippinarum on a tidal flat

Science.gov (United States)

Nambu, Ryogen; Saito, Hajime; Tanaka, Yoshio; Higano, Junya; Kuwahara, Hisami

2012-03-01

There are many studies on spatial distributions of Asari clam Ruditapes philippinarum adults on tidal flats but few have dealt with spatial distributions of newly settled Asari clam (physical/topographical conditions on tidal flats. We examined small-scale spatial distributions of newly settled individuals on the Matsunase tidal flat, central Japan, during the low spring tides on two days 29th-30th June 2007, together with the shear stress from waves and currents on the flat. The characteristics of spatial distribution of newly settled Asari clam markedly varied depending on both of hydrodynamic and topographical conditions on the tidal flat. Using generalized linear models (GLMs), factors responsible for affecting newly settled Asari clam density and its spatial distribution were distinguished between sampling days, with "crest" sites always having a negative influence each on the density and the distribution on both sampling days. The continuously recorded data for the wave-current flows at the "crest" site on the tidal flat showed that newly settled Asari clam, as well as bottom sediment particles, at the "crest" site to be easily displaced. Small-scale spatial distributions of newly settled Asari clam changed with more advanced benthic stages in relation to the wave shear stress.

Manila clams from Hg polluted sediments of Marano and Grado lagoons (Italy) harbor detoxifying Hg resistant bacteria in soft tissues

International Nuclear Information System (INIS)

Baldi, Franco; Gallo, Michele; Marchetto, Davide; Faleri, Claudia; Maida, Isabel; Fani, Renato

2013-01-01

A mechanism of mercury detoxification has been suggested by a previous study on Hg bioaccumulation in Manila clams (Ruditapes philippinarum) in the polluted Marano and Grado lagoons and in this study we demonstrate that this event could be partly related to the detoxifying activities of Hg-resistant bacteria (MRB) harbored in clam soft tissues. Therefore, natural clams were collected in six stations during two different periods (winter and spring) from Marano and Grado Lagoons. Siphons, gills and hepatopancreas from acclimatized clams were sterile dissected to isolate MRB. These anatomical parts were glass homogenized or used for whole, and they were lying on a solid medium containing 5 mg l −1 HgCl 2 and incubated at 30 °C. A total of fourteen bacterial strains were isolated and were identified by 16S rDNA sequencing and analysis, revealing that strains were representative of eight bacterial genera, four of which were Gram-positive (Enterococcus, Bacillus, Jeotgalicoccus and Staphylococcus) and other four were Gram-negative (Stenotrophomonas, Vibrio, Raoultella and Enterobacter). Plasmids and merA genes were found and their sequences determined. Fluorescence in situ hybridization (FISH) technique shows the presence of Firmicutes, Actinobacteria and Gammaproteobacteria by using different molecular probes in siphon and gills. Bacterial clumps inside clam flesh were observed and even a Gram-negative endosymbiont was disclosed by transmission electronic microscope inside clam cells. Bacteria harbored in cavities of soft tissue have mercury detoxifying activity. This feature was confirmed by the determination of mercuric reductase in glass-homogenized siphons and gills. -- Highlights: ► We isolated Gram-positive and Gram-negative Hg resistant strains from soft tissues of Ruditapes philippinarum. ► We identify 14 mercury resistant strains by 16S rRNA gene sequences. ► Bacteria in siphon and gill tissues of clams were observed by TEM and identified with

Manila clams from Hg polluted sediments of Marano and Grado lagoons (Italy) harbor detoxifying Hg resistant bacteria in soft tissues

Energy Technology Data Exchange (ETDEWEB)

Baldi, Franco [Dipartimento di Scienze Molecolari e Nanosistemi, Cà Foscari University of Venice, Dorsoduro 2137, 30123 Venice (Italy); Gallo, Michele; Marchetto, Davide [Dipartimento di Scienze Molecolari e Nanosistemi, Cà Foscari University of Venice, Dorsoduro 2137, 30123 Venice (Italy); Faleri, Claudia [Department of Environmental Science ‘G. Sarfatti’, University of Siena, 53100 Siena (Italy); Maida, Isabel; Fani, Renato [Dipartimento di Biologia Evoluzionistica, Via Romana, 17, University of Florence, 50125 Florence (Italy)

2013-08-15

A mechanism of mercury detoxification has been suggested by a previous study on Hg bioaccumulation in Manila clams (Ruditapes philippinarum) in the polluted Marano and Grado lagoons and in this study we demonstrate that this event could be partly related to the detoxifying activities of Hg-resistant bacteria (MRB) harbored in clam soft tissues. Therefore, natural clams were collected in six stations during two different periods (winter and spring) from Marano and Grado Lagoons. Siphons, gills and hepatopancreas from acclimatized clams were sterile dissected to isolate MRB. These anatomical parts were glass homogenized or used for whole, and they were lying on a solid medium containing 5 mg l{sup −1} HgCl{sub 2} and incubated at 30 °C. A total of fourteen bacterial strains were isolated and were identified by 16S rDNA sequencing and analysis, revealing that strains were representative of eight bacterial genera, four of which were Gram-positive (Enterococcus, Bacillus, Jeotgalicoccus and Staphylococcus) and other four were Gram-negative (Stenotrophomonas, Vibrio, Raoultella and Enterobacter). Plasmids and merA genes were found and their sequences determined. Fluorescence in situ hybridization (FISH) technique shows the presence of Firmicutes, Actinobacteria and Gammaproteobacteria by using different molecular probes in siphon and gills. Bacterial clumps inside clam flesh were observed and even a Gram-negative endosymbiont was disclosed by transmission electronic microscope inside clam cells. Bacteria harbored in cavities of soft tissue have mercury detoxifying activity. This feature was confirmed by the determination of mercuric reductase in glass-homogenized siphons and gills. -- Highlights: ► We isolated Gram-positive and Gram-negative Hg resistant strains from soft tissues of Ruditapes philippinarum. ► We identify 14 mercury resistant strains by 16S rRNA gene sequences. ► Bacteria in siphon and gill tissues of clams were observed by TEM and identified

Fracture toughness of China low activation martensitic (CLAM) steel at room temperature

Energy Technology Data Exchange (ETDEWEB)

Li, Kunfeng [University of Science and Technology of China, Hefei, Anhui 230027 (China); Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); Liu, Shaojun, E-mail: shaojun.liu@fds.org.cn [Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); Huang, Qunying [University of Science and Technology of China, Hefei, Anhui 230027 (China); Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); Xu, Gang; Jiang, Siben [Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China)

2014-04-15

Highlights: • The fracture toughness of CLAM steel at room temperature is 417.9 kJ/m{sup 2} measured by unloading compliance method according to the ASTM E1820-11. • The fracture toughness of CLAM steel at room temperature can be calculated on the basis of the fractal dimensions measured under plane strain conditions. The calculated result and relative error for this experiment are 454.6 kJ/m{sup 2} and 8.78% respectively. • The calculation method could be used to estimate the fracture toughness of materials with analysis of the fracture surface. - Abstract: The fracture toughness (J{sub IC}) of China low activation martensitic (CLAM) steel was tested at room temperature through the compact tension specimen, the result is 417.9 kJ/m{sup 2}, which is similar to the JLF-1 at same experimental conditions. The microstructural observation of the fracture surface shows that the fracture mode is a typical ductile fracture. Meanwhile, the fracture toughness is also calculated on the basis of the fractal dimension and the calculated result is 454.6 kJ/m{sup 2}, which is consistent well with the experimental result. This method could be used to estimate the fracture toughness of materials by analyzing of the fracture surface.

Effects of restructuring of the Polish hard coal industry in 1990-2004; Efekty restrukturyzacji polskiego gornictwa wegla kamiennego w latach 1990-2004

Energy Technology Data Exchange (ETDEWEB)

Olszowski, J. [Mining Chamber of Industry and Commerce (Poland)

2004-07-01

During the period 1990 to 2003 Poland thoroughly restructured its hard coal industry. It reduced production by 77 million tons and employment by 279300; average output was increased from a single longwall by 2046.1 ton/day, and total productivity by 1,741 kg/ms. The balance of liabilities and recoverables was reduced to 6,208.8 million Zl. The article describes the reform of the hard coal industry, in two phases, 1990-1997 and 1998-2003. 11 refs., 6 figs., 1 tab.

Impact of High Hydrostatic Pressure on the Shelling Efficacy, Physicochemical Properties, and Microstructure of Fresh Razor Clam (Sinonovacula constricta).

Science.gov (United States)

Xuan, Xiao-Ting; Cui, Yan; Lin, Xu-Dong; Yu, Jing-Feng; Liao, Xiao-Jun; Ling, Jian-Gang; Shang, Hai-Tao

2018-02-01

The effects of high hydrostatic pressure (HHP) treatments (200, 300, and 400 MPa for 1, 3, 5 and 10 min) on the shelling efficacy (the rate of shelling, the rate of integrity and yield of razor clam meat) and the physicochemical (drip loss, water-holding capacity, pH, conductivity, lipid oxidation, Ca 2+ -ATPase activity, myofibrillar protein content), microbiological (total viable counts) and microstructural properties of fresh razor clam (Sinonovacula constricta) were investigated. HHP treatments significantly (P hydrostatic pressure (HHP) is now well known as a nonthermal processing technology and becoming increasingly acknowledged. However, it has not been widely applied to shell seafood due to its uncertain influence on its quality and shelling property. This study could provide valuable information regarding the shelling efficacy, physicochemical properties, and microstructure of razor clam treated by HHP. And it demonstrated that HHP showed a positive impact on quality of razor clam treated by HHP. © 2018 Institute of Food Technologists®.

Clam bioaccumulation of Alkylphenols and Polyciclic aromatic hydrocarbons in the Venice lagoon under different pressures.

Science.gov (United States)

Ademollo, N; Patrolecco, L; Matozzo, V; Marin, M G; Valsecchi, S; Polesello, S

2017-11-15

Biota-Sediment Accumulation Factors (BSAFs) of nonylphenols (NPs) and polycyclic aromatic hydrocarbons (PAHs) in Ruditapes philippinarum from the Venice Lagoon (Italy) were determined with the aim to verify whether the routine biomonitoring studies are reliable in contaminated sites. Clams and sediments were collected in field campaigns (October 2003 to June 2004) in three sites of the Venice Lagoon. Results showed that Marghera and Campalto sediments were more contaminated by NPs and PAHs than Poveglia. Different trends were observed in the contamination of clams with the highest BSAFs found at Poveglia. BSAF trend appeared to be inversely related to the contaminant pressure on the sites. These results suggest that clam bioaccumulation is not always representative of the chemical pressure on aquatic biota. The direct correlation between sediment and biota concentrations in contaminated sites can be lost as a function of the site-specific conditions such as sediment toxicity and food availability. Copyright © 2017 Elsevier Ltd. All rights reserved.

The effects of clam fishing on the properties of surface sediments in the lagoon of Venice, Italy

Directory of Open Access Journals (Sweden)

R. J. Aspen

2004-01-01

Full Text Available Harvesting of clams(Tapes philippinarum has important socio-economic and environmental implications for the Venice lagoon area, Italy. Clam harvesting disrupts the structure of benthic communities but the effects upon sediment stability and surface structure remain unclear. The effect of clam fishing on the sediment properties of the lagoon bed was investigated at two different sites, a heavily fished site (San Angelo and an infrequently fished site (San Giaccomo. Both sites were assessed for immediate impacts of fishing, using indicators of biogenic sediment stabilisation. Samples were taken at three points along three 100 m linear transects at each site prior to and post fishing. Paired samples were also taken parallel to each transect at a distance of 5m, to allow for temporal variation. Sediment stability, measured with a cohesive strength meter (CSM, was significantly higher at the less impacted site (F1,34 = 6.23, p a (chl a, colloidal-S carbohydrate and dry bulk density were observed on the transect after fishing but not adjacent to the fishing path. At the heavily impacted site, clam fishing by trawling had, in general, no significant effect on the biological and physical properties (although chl a did decrease significantly after fishing. The lack of a significant impact from fishing at the impacted site was attributed to the higher frequency of fishing occurring in this area. Hence, frequent fishing of the lagoon prevents establishment of biotic communities, preventing biostabilisation and thus reduces the stability of the surface sediment. Keywords: clam harvesting, erosion threshold, microphytobenthos, sediment, stability

Gametogenic development and spawning of the mud clam, Polymesoda erosa (Solander, 1876) at Chorao Island, Goa

Digital Repository Service at National Institute of Oceanography (India)

Clemente, S.; Ingole, B.S.

islands of tropical and sub-tropical regions (Meehan 1982). Given the extensive use of the mangrove clam in the diet of many tropical islanders, the potential exists to exploit this clam commercially. An under- standing of the reproductive biology...: baban@nio.org Published in collaboration with the University of Bergen and the Institute of Marine Research, Norway, and the Marine Biological Laboratory, University of Copenhagen, Denmark Marine Biology Research, 2009; 5: 109C1121 (Accepted 12 June 2008...

Freshwater Clams (Pilsbryoconcha Exilis) as an Potential Local Mineral Sources in Weaning Food to Overcome Stunting in Grobogan, Central Java, Indonesia

Science.gov (United States)

Putri, S. R.; Anjani, Gemala; Wijayanti, Hartanti Sandi; Nuryanto

2018-02-01

Based on a preliminary survey in Grobogan Central Java, one of the local food that has a prospective nutrient content developed is freshwater clams. Results of PSG report in 2015, especially in Grobogan district with stunting problem of 31.5% consisting of 7.2% very short and 24.1% short. From the stunting event factor, the role of weaning food in the form of baby porridge is the most important component in the fulfillment of infant nutrition. The research is divided into two stages of the research is the initial stage to make the formulation process by way of freshwater clams, nutrient analysis, and formula calculation. The second stage is the process of formulation weaning food by way of formula making, nutrient analysis, and acceptance test of weaning food on the baby slurry is substituted by the freshwater clams. The influence statistically different substitution of freshwater clams on protein content (p=0.014), fat (p=0,041), carbohydrate (p=0,039), water (p=0,0001), ash (p=0.0001), iron (p=0.0001), and zinc (p=0.0001). There is no influence substitution of freshwater clams on energy content (p=0,129) and fiber (p=0,225). The percentage of favorite level on the acceptance test of color (p=0,005) and taste (p=0,006) was statistically different, but there was no difference flavour (p=0,913) and texture (p=0,198). freshwater clams flour is rich in iron and zinc content, so it can serve as local food, especially in Grobogan Central Java as a stunting handling. Obtained from the results of several formulations substituted of freshwater clams in formulation 2 is a formula that can meet the standards of KEPMENKES except on the content of protein and moisture content. Formula 2 acceptable to the panelists, except for the assessment of taste.

Allometric relationships in the bioconcentration of heavy metals by the edible tropical clam Gafrarium tumidum

International Nuclear Information System (INIS)

Hedouin, L.; Metian, M.; Teyssie, J.-L.; Fowler, S.W.; Fichez, R.; Warnau, M.

2006-01-01

Although metal contamination is a problem of major concern in the lagoon of New Caledonia due to intense mining activities conducted on land, very little is known on the metal ecotoxicology of local marine organisms. The clam Gafrarium tumidum was investigated to assess its usefulness as a bioindicator species of metal contamination in this lagoon. More particularly, allometric relationships between metal accumulation and clam size were determined for five common metals in New Caledonian lagoon waters (Cd, Cr, Co, Zn and Ag) using a highly sensitive radiotracer technique. Experimental results showed that allometric relationships were dependent on the element and on the body compartment considered. As a rule, allometric relationships of metal concentration factor were more pronounced in shell than in soft parts. Significant relationships with clam size for Cd, Cr, Co and Zn followed inverse power functions. In contrast, the degree of Ag bioaccumulation was positively correlated with size. In view of the literature on Ag in bivalves, the latter observation suggests the occurrence of a specific detoxification mechanism (sequestration) that would be more efficient in old individuals. Overall, the experimental results indicate that the use of G. tumidum as a bioindicator in monitoring programmes requires selecting individuals of a specific size range in order to obtain comparable information about ambient metal levels. Since the size effect is greatest among smaller individuals, it is recommended to select clams with a shell width greater than 35 mm

Allometric relationships in the bioconcentration of heavy metals by the edible tropical clam Gafrarium tumidum

Energy Technology Data Exchange (ETDEWEB)

Hedouin, L. [International Atomic Energy Agency-Marine Environment Laboratory, 4 Quai Antoine 1er, MC-98000 Monaco (Monaco); Laboratoire de Biologie et d' Environnement Marins, FRE 2727, La Rochelle University, 22 Av. Michel Crepeau, F-17000 La Rochelle (France); Institut de Recherche pour le Developpement, Centre d' Oceanologie de Marseille, Station Marine d' Endoume, Rue de la Batterie des Lions, F-13007 Marseille (France); Metian, M. [International Atomic Energy Agency-Marine Environment Laboratory, 4 Quai Antoine 1er, MC-98000 Monaco (Monaco); Teyssie, J.-L. [International Atomic Energy Agency-Marine Environment Laboratory, 4 Quai Antoine 1er, MC-98000 Monaco (Monaco); Fowler, S.W. [International Atomic Energy Agency-Marine Environment Laboratory, 4 Quai Antoine 1er, MC-98000 Monaco (Monaco); Fichez, R. [Institut de Recherche pour le Developpement, Centre d' Oceanologie de Marseille, Station Marine d' Endoume, Rue de la Batterie des Lions, F-13007 Marseille (France); Warnau, M. [International Atomic Energy Agency-Marine Environment Laboratory, 4 Quai Antoine 1er, MC-98000 Monaco (Monaco)]. E-mail: m.warnau@iaea.org

2006-07-31

Although metal contamination is a problem of major concern in the lagoon of New Caledonia due to intense mining activities conducted on land, very little is known on the metal ecotoxicology of local marine organisms. The clam Gafrarium tumidum was investigated to assess its usefulness as a bioindicator species of metal contamination in this lagoon. More particularly, allometric relationships between metal accumulation and clam size were determined for five common metals in New Caledonian lagoon waters (Cd, Cr, Co, Zn and Ag) using a highly sensitive radiotracer technique. Experimental results showed that allometric relationships were dependent on the element and on the body compartment considered. As a rule, allometric relationships of metal concentration factor were more pronounced in shell than in soft parts. Significant relationships with clam size for Cd, Cr, Co and Zn followed inverse power functions. In contrast, the degree of Ag bioaccumulation was positively correlated with size. In view of the literature on Ag in bivalves, the latter observation suggests the occurrence of a specific detoxification mechanism (sequestration) that would be more efficient in old individuals. Overall, the experimental results indicate that the use of G. tumidum as a bioindicator in monitoring programmes requires selecting individuals of a specific size range in order to obtain comparable information about ambient metal levels. Since the size effect is greatest among smaller individuals, it is recommended to select clams with a shell width greater than 35 mm.

Ecotoxicological Effects of Chemical Contaminants Adsorbed to Microplastics in the Clam Scrobicularia plana

Directory of Open Access Journals (Sweden)

Sarit O'Donovan

2018-04-01

Full Text Available Although microplastics (MPs are distributed globally in the marine environment, a great deal of unknowns relating to their ecotoxicological effects on the marine biota remains. Due to their lipophilic nature, microplastics have the potential to adsorb persistent organic pollutants present in contaminated regions, which may increase their detrimental impact once assimilated by organisms. This study investigates the ecotoxicological effects of exposure to low-density polyethylene (LDPE microplastics (11–13 μm, with and without adsorbed contaminants (benzo[a]pyrene—BaP and perfluorooctane sulfonic acid—PFOS, in the peppery furrow shell clam, Scrobicularia plana. Environmentally relevant concentrations of contaminants (BaP−16.87 ± 0.22 μg g−1 and PFOS−70.22 ± 12.41 μg g−1 were adsorbed to microplastics to evaluate the potential role of plastic particles as a source of chemical contamination once ingested. S. plana were exposed to microplastics, at a concentration of 1 mg L−1, in a water-sediment exposure setup for 14 days. Clams were sampled at the beginning of the experiment (day 0 and after 3, 7, and 14 days. BaP accumulation, in whole clam tissues, was analyzed. A multi-biomarker assessment was conducted in the gills, digestive gland, and haemolymph of clams to clarify the effects of exposure. This included the quantification of antioxidant (superoxide dismutase, catalase, glutathione peroxidase and biotransformation (glutathione-S-transferases enzyme activities, oxidative damage (lipid peroxidation levels, genotoxicity (single and double strand DNA breaks, and neurotoxicity (acetylcholinesterase activity. Results suggest a potential mechanical injury of gills caused by ingestion of microplastics that may also affect the analyzed biomarkers. The digestive gland seems less affected by mechanical damage caused by virgin microplastic exposure, with the MPs-adsorbed BaP and PFOS exerting a negative influence over the assessed

Intra-specific diet shift in manila clams (Ruditapes philippinarum) as revealed by carbon and nitrogen stable isotopes and fatty acid biomarker

Science.gov (United States)

Suh, Y.; Shin, K.

2011-12-01

Manila clams sampled in Seonjae Island, Korea with shell lengths (SL) below 19.76 mm in average showed a significantly depleted carbon and nitrogen isotope values (Pcultured in IFHRI. The result of fatty acid composition of manila clams in relation to size or growth rate suggests that fast growing clams would have rapid metabolism of fatty acids not required by the animals and an accumulation of the essential fatty acids (PUFA). In addition, their higher energy requirement and more active state of development would further diminish lipid reserve of the species.

Bioaccumulation of gasoline in brackish green algae and popular clams

Directory of Open Access Journals (Sweden)

Gihan A. El-Shoubaky

2016-03-01

Full Text Available The green algae (Ulva lactuca and Enteromorpha clathrata and the clams (Tapes decussates and Venerupis aurea grow together in Timsah Lake, Suez Canal, Egypt. Our ultimate goal is to validate the bioaccumulation of gasoline in the marine organisms and their behavior after exposure to the pollutant, experimentally. These species were treated with a serial treatment of gasoline (1000, 4000, 16,000 and 64,000 μl in aquaria with brackish sea-water for 72 h. The tested green algae and clams were taken for an analysis of total hydrocarbon accumulation daily. The statistical analysis showed significant differences between the four species and also between the duration of exposure. The accumulation of gasoline in U. lactuca and E. clathrata reached their maximum after 48 h at 1000 and 4000 μl. The highest absorption was registered after 24 h only at 16,000 and at 64,000 μl. U. lactuca recorded complete mortality in 64,000 μl at 72 h whereas E. clathrata registered death at 48 h and 72 h in the same treatment. V. aurea was more sensitive than T. decussates. The accumulation of gasoline reached its maximum in V. aurea after only 24 h in the first treatment while it retarded to 48 h in T. decussates with a lesser accumulation. However, both clam species accumulated the highest amount of petroleum hydrocarbons during the first hour of exposure at the first treatment. In the third and fourth treatments, clams did not accumulate gasoline but began to dispose it from their tissues till it became less than that in the control. Mortality gradually increased with time in each treatment except the last one (64,000 μl in which 100% death of the specimens was observed. In general, the bioaccumulation of gasoline level was in a descending order as follows: U. lactuca > E. clathrata > V. aurea > T. decussates. Their behavior changed from accumulation to detoxification with time and with the increase in pollutant concentration. Generally, these

Microstructure evolution of the oxide dispersion strengthened CLAM steel during mechanical alloying process

Energy Technology Data Exchange (ETDEWEB)

Song, Liangliang [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Science, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230031 (China); Liu, Shaojun, E-mail: shaojun.liu@fds.org.cn [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Science, Hefei, Anhui, 230031 (China); Mao, Xiaodong [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Science, Hefei, Anhui, 230031 (China)

2016-11-15

Highlights: • A nano-sized oxides dispersed ODS-CLAM steel was obtained by MA and HIP. • A minimum saturated grain size of down to 30 nm was achieved by varying the milling time from 0 to 100 h. • Solution of W in the MA powder could be significantly improved by increasing MA rotation speed. - Abstracts: Oxide dispersion strengthened Ferritic/Martensitic steel is considered as one of the most potential structural material for future fusion reactor, owing to its high mechanical properties and good irradiation resistance. The oxide dispersion strengthened China Low Activation Martensitic (ODS-CLAM) steel was fabricated by mechanical alloying (MA) and hot isostatic pressing (HIP). The microstructural evolutions during the process of ball milling and subsequent consolidation were investigated by SEM, XRD and TEM. The results showed that increasing the milling time during the first 36 h milling could effectively decrease the grain size to a value of around 30 nm, over which grain sized remained nearly constant. Increasing the rotation speed promoted the solution of tungsten (W) element obviously and decreased the grain size to a certain degree. Observation on the consolidated and further heat-treated ODS-CLAM steel samples indicated that a martensite microstructure with a high density of nano-particles was achieved.

Accumulation and elimination profiles of paralytic shellfish poison in the short-necked clam Tapes japonica fed with the toxic dinoflagellate Gymnodinium catenatum.

Science.gov (United States)

Samsur, Mohamad; Takatani, Tomohiro; Yamaguchi, Yasunaga; Sagara, Takefumi; Noguchi, Tamao; Arakawa, Osamu

2007-02-01

The paralytic shellfish poison (PSP)-producing dinoflagellate Gymnodinium catenatum (Gc) was fed to the short-necked clam Tapes japonica, and the accumulation, transformation and elimination profiles of PSP were investigated by means of high-performance liquid chromatography with postcolumn fluorescence derivatization (HPLC-FLD). The short-necked clams ingested most of the Gc cells (4 x 10(6) cells) supplied as a bolus at the beginning of the experiment, and accumulated a maximal amount of toxin (181 nmol/10 clams) after 12 hr. The rate of toxin accumulation at that time was 16%, which rapidly decreased thereafter. During the rearing period, a variation in toxin composition, derived presumably from the transformation of toxin analogues in the clams, was observed, including a reversal of the ratio of C2 to C1, and the appearance of carbamate (gonyautoxin (GTX) 2, 3) and decarbamoyl (dc) derivatives (decarbamoylsaxitoxin (dcSTX) and dcGTX2, 3), which were undetectable in Gc cells. The total amount of toxin contained in clams and residue (remaining Gc cells and/or excrement in the rearing tank) gradually declined, and only about 1% of the supplied toxin was detected at the end of the experiment.

Enhanced trace element concentrations in tissues of the clam Ruditapes decussatus transplanted to areas influenced by human activities (Ria Formosa, Portugal

Directory of Open Access Journals (Sweden)

Maria João Botelho

2017-06-01

Full Text Available To examine the extent to which human activities near the Ria Formosa coastal lagoon influence the accumulation of trace elements (TE in Ruditapes decussatus, individuals were transplanted from a natural bank located in the lower lagoon to three sites located in clam growth grounds under the influence of a small city (Faro, a fish farming centre (Olhão and a site near the lagoon inlet (Lavajo. Concentrations were determined in substrate of the clam grounds and in the digestive gland, gills, mantle plus siphons, and remaining tissues of clams in four periods of the year. These measurements were accomplished with the monthly survey of the gametogenic stages, condition index, proteins, glycogen, total lipids, pH and osmolarity of hemolymph. Arsenic, Cu, Mn, V, Cr and Pb were preferentially linked to the digestive gland, while Cd was linked to the gills. TE concentrations in the digestive gland and remaining tissues were higher in winter, most likely reflecting additional inputs associated with rain. The lack of disruptions in biological parameters and the prolonged period of spawning and gonad recovery in clams suggest that the current TE availability in the lagoon has a minor influence on the reproductive cycle and hence on clam production.

Nutrients and clam contamination by Escherichia coli in a meso-tidal coastal lagoon: Seasonal variation in counter cycle to external sources

International Nuclear Information System (INIS)

Botelho, Maria João; Soares, Florbela; Matias, Domitília; Vale, Carlos

2015-01-01

Highlights: • Sources of nutrients and E. coli in Ria Formosa linked to tourism in summer. • Lower nutrient values and clam contamination by E. coli in summer. • Bactericide effect of temperature and solar radiation causes lower E. coli. • Higher biological consumption of nutrients in warmer periods. • Results mirror possible effects of climate changes on coastal lagoons. - Abstract: The clam Ruditapes decussatus was transplanted from a natural recruitment area of Ria Formosa to three sites, surveyed for nutrients in water and sediments. Specimens were sampled monthly for determination of Escherichia coli, condition index and gonadal index. Higher nutrient values in low tide reflect drainage, anthropogenic sources or sediment regeneration, emphasising the importance of water mixing in the entire lagoon driven by the tide. Despite the increase of effluent discharges in summer due to tourism, nutrient concentrations and E. coli in clams were lower in warmer periods. The bactericide effect of temperature and solar radiation was better defined in clams from the inlet channel site than from sites closer to urban effluents. High temperature in summer and torrential freshwater inputs to Ria Formosa may anticipate climate change scenarios for south Europe. Seasonal variation of nutrients and clam contamination may thus point to possible alterations in coastal lagoons and their ecosystem services

Cadmium sulfide quantum dots induce oxidative stress and behavioral impairments in the marine clam Scrobicularia plana.

Science.gov (United States)

Buffet, Pierre-Emmanuel; Zalouk-Vergnoux, Aurore; Poirier, Laurence; Lopes, Christelle; Risso-de-Faverney, Christine; Guibbolini, Marielle; Gilliland, Douglas; Perrein-Ettajani, Hanane; Valsami-Jones, Eugenia; Mouneyrac, Catherine

2015-07-01

Cadmium sulfide (CdS) quantum dots have a number of current applications in electronics and solar cells and significant future potential in medicine. The aim of the present study was to examine the toxic effects of CdS quantum dots on the marine clam Scrobicularia plana exposed for 14 d to these nanomaterials (10 µg Cd L(-1) ) in natural seawater and to compare them with soluble Cd. Measurement of labile Cd released from CdS quantum dots showed that 52% of CdS quantum dots remained in the nanoparticulate form. Clams accumulated the same levels of Cd regardless of the form in which it was delivered (soluble Cd vs CdS quantum dots). However, significant changes in biochemical responses were observed in clams exposed to CdS quantum dots compared with soluble Cd. Increased activities of catalase and glutathione-S-transferase were significantly higher in clams exposed in seawater to Cd as the nanoparticulate versus the soluble form, suggesting a specific nano effect. The behavior of S. plana in sediment showed impairments of foot movements only in the case of exposure to CdS quantum dots. The results show that oxidative stress and behavior biomarkers are sensitive predictors of CdS quantum dots toxicity in S. plana. Such responses, appearing well before changes might occur at the population level, demonstrate the usefulness of this model species and type of biomarker in the assessment of nanoparticle contamination in estuarine ecosystems. © 2015 SETAC.

Determining the Effect of Material Hardness During the Hard Turning of AISI4340 Steel

Science.gov (United States)

Kambagowni, Venkatasubbaiah; Chitla, Raju; Challa, Suresh

2018-05-01

In the present manufacturing industries hardened steels are most widely used in the applications like tool design and mould design. It enhances the application range of hard turning of hardened steels in manufacturing industries. This study discusses the impact of workpiece hardness, feed and depth of cut on Arithmetic mean roughness (Ra), root mean square roughness (Rq), mean depth of roughness (Rz) and total roughness (Rt) during the hard turning. Experiments have been planned according to the Box-Behnken design and conducted on hardened AISI4340 steel at 45, 50 and 55 HRC with wiper ceramic cutting inserts. Cutting speed is kept constant during this study. The analysis of variance was used to determine the effects of the machining parameters. 3-D response surface plots drawn based on RSM were utilized to set up the input-output relationships. The results indicated that the feed rate has the most significant parameter for Ra, Rq and Rz and hardness has the most critical parameter for the Rt. Further, hardness shows its influence over all the surface roughness characteristics.

Clam-Gallasův palác - emblematická architektura?

Czech Academy of Sciences Publication Activity Database

Konečný, Lubomír

2009-01-01

Roč. 28, - (2009), s. 91-98 ISSN 0231-7443. [Život pražských paláců. Praha, 09.10.2007-11.10.2007] Institutional research plan: CEZ:AV0Z80330511 Keywords : Clam-Gallas Palace * Johann Bernhard Fischer von Erlach * architecture * emblem s * imprints Subject RIV: AL - Art, Architecture, Cultural Heritage

Settlement, mortality and growth of the asari clam (Ruditapes philippinarum) for a collapsed population on a tidal flat in Nakatsu, Japan

Science.gov (United States)

Tezuka, Naoaki; Kamimura, Satomi; Hamaguchi, Masami; Saito, Hajime; Iwano, Hideki; Egashira, Junichi; Fukuda, Yuichi; Tawaratsumida, Takahiko; Nagamoto, Atsushi; Nakagawa, Koichi

2012-04-01

Although fluctuation and decline in bivalve populations have been reported worldwide, the underlying processes are not yet fully understood. This lack of understanding is partly due to an absence of demographic information for the early post-settlement period. This is the case particularly for annual production of the asari clam (also commonly known as the Manila clam, Ruditapes philippinarum) in Japan, which has greatly decreased in recent years. A remarkable decrease has been observed in the Nakatsu tidal flat, where current yields are less than 0.02% of the maximum yield. Possible explanations for this decline are: 1. limitation on recruitment due to overfishing; and 2. the demographic processes of growth and mortality have been altered by environmental changes, such as rise in seawater temperature or decrease in phytoplankton abundance. However, because of a lack of demographic information (e.g., the initial densities of larval settlement and mortality and growth rates post-settlement), the reasons for the decline, and the relative importance of each period in the life cycle in determining population abundance, remain unclear. Despite the decline, we observed high levels of recruitment of 0-year-class clams on the Nakatsu tidal flat in spring 2005, where more than 10,000 individuals m- 2 3-5 mm in shell length, estimated to have settled during the previous autumn, were observed. To obtain demographic information on the Nakatsu clams, we investigated two factors. First, we investigated the distribution of the 0-year-class clams and their rate of change in density as a combination of mortality, emigration and immigration on the whole tidal flat after a year. Second, we investigated the rate of change in the density and growth of clams after settlement in the center of the flat for 3 years. The rate of decrease in the density of the 0-year-class clams over the whole tidal flat after a year was greater at the stations where the initial density was higher. This

Size-dependent effects of low level cadmium and zinc exposure on the metabolome of the Asian clam, Corbicula fluminea

International Nuclear Information System (INIS)

Spann, Nicole; Aldridge, David C.; Griffin, Julian L.; Jones, Oliver A.H.

2011-01-01

Highlights: Small and large Corbicula fluminea were exposed to cadmium and zinc spiked sediment. Metabolomic changes in the freshwater clams were determined by NMR and GC–MS. Metabolic perturbations were related to amino acid and energy related metabolism. Small and large clams were differentiated by their metabolic composition. Size classes showed opposite responses to metal stress. - Abstract: The toxic effects of low level metal contamination in sediments are currently poorly understood. We exposed different sized Asian clams, Corbicula fluminea, to sediment spiked with environmentally relevant concentrations of either zinc, cadmium or a zinc–cadmium mixture for one week. This freshwater bivalve is well suited for sediment toxicity tests as it lives partly buried in the sediment and utilises sediment particles as a food resource. After one week, the whole tissue composition of low molecular weight metabolites was analysed by nuclear magnetic resonance spectroscopy (NMR) and gas chromatography–mass spectrometry (GC–MS). The condition index (ratio of tissue dry weight to volume inside the shell valves) was also measured. Small and large clams were clearly differentiated by their metabolic composition and the two size classes showed opposite responses to the mixture spiked sediment. No effects of zinc alone on the metabolome were found and cadmium only influenced the smaller size class. The main perturbations were seen in amino acid and energy metabolism, with small clams using amino acids as an energy resource and larger clams primarily drawing on their larger storage reserves of carbohydrates. Our study demonstrates that metabolomics is a useful technique to test for low level toxicity which does not manifest in mortality or condition index changes. The differing effects between the two size classes stress that it is important to consider age/size when conducting metabolomic and ecotoxicology assessments, since testing for the effects on only one size

Size-dependent effects of low level cadmium and zinc exposure on the metabolome of the Asian clam, Corbicula fluminea

Energy Technology Data Exchange (ETDEWEB)

Spann, Nicole, E-mail: nicole.spann@web.de [Department of Zoology, University of Cambridge, Downing Street, Cambridge CB2 3EJ (United Kingdom); Aldridge, David C., E-mail: da113@cam.ac.uk [Department of Zoology, University of Cambridge, Downing Street, Cambridge CB2 3EJ (United Kingdom); Griffin, Julian L., E-mail: jlg40@mole.bio.cam.ac.uk [Sanger Building, Department of Biochemistry, University of Cambridge, 80 Tennis Court Road, Cambridge CB2 1GA (United Kingdom); Jones, Oliver A.H., E-mail: o.jones@gmail.com [Sanger Building, Department of Biochemistry, University of Cambridge, 80 Tennis Court Road, Cambridge CB2 1GA (United Kingdom)

2011-10-15

Highlights: Small and large Corbicula fluminea were exposed to cadmium and zinc spiked sediment. Metabolomic changes in the freshwater clams were determined by NMR and GC-MS. Metabolic perturbations were related to amino acid and energy related metabolism. Small and large clams were differentiated by their metabolic composition. Size classes showed opposite responses to metal stress. - Abstract: The toxic effects of low level metal contamination in sediments are currently poorly understood. We exposed different sized Asian clams, Corbicula fluminea, to sediment spiked with environmentally relevant concentrations of either zinc, cadmium or a zinc-cadmium mixture for one week. This freshwater bivalve is well suited for sediment toxicity tests as it lives partly buried in the sediment and utilises sediment particles as a food resource. After one week, the whole tissue composition of low molecular weight metabolites was analysed by nuclear magnetic resonance spectroscopy (NMR) and gas chromatography-mass spectrometry (GC-MS). The condition index (ratio of tissue dry weight to volume inside the shell valves) was also measured. Small and large clams were clearly differentiated by their metabolic composition and the two size classes showed opposite responses to the mixture spiked sediment. No effects of zinc alone on the metabolome were found and cadmium only influenced the smaller size class. The main perturbations were seen in amino acid and energy metabolism, with small clams using amino acids as an energy resource and larger clams primarily drawing on their larger storage reserves of carbohydrates. Our study demonstrates that metabolomics is a useful technique to test for low level toxicity which does not manifest in mortality or condition index changes. The differing effects between the two size classes stress that it is important to consider age/size when conducting metabolomic and ecotoxicology assessments, since testing for the effects on only one size class makes

Bioavailability of polycyclic aromatic hydrocarbons (PAHs) to short-neck clam (Paphia undulata) from sediment matrices in mudflat ecosystem of the west coast of Peninsular Malaysia.

Science.gov (United States)

Keshavarzifard, Mehrzad; Zakaria, Mohamad Pauzi; Hwai, Tan Shau

2017-06-01

The bioaccumulation and bioavailability of polycyclic aromatic hydrocarbons (PAHs) were characterized in sediment and Paphia undulata (short-neck clam) from six mudflat areas in the west coasts of Peninsular Malaysia. The concentrations of total PAHs varied from 357.1 to 6257.1 and 179.9 ± 7.6 to 1657.5 ± 53.9 ng g -1 dry weight in sediment and short-neck clam samples, respectively. PAHs can be classified as moderate to very high level of pollution in sediments and moderate to high level of pollution in short-neck clams. The diagnostic ratios of individual PAHs and principal component analysis indicate both petrogenic and pyrogenic sources with significant dominance of pyrogenic source. The first PAHs biota-sediment accumulation factors and relative biota-sediment accumulation factors data for short-neck clam were obtained in this study, indicating a preferential accumulation of lower molecular weight PAHs. Evaluation of PAH levels in sediments and short-neck clams indicates that short-neck clam could be introduced as a good biomonitor in mudflats. The results also demonstrated that under environmental conditions, the sedimentary load of hydrocarbons appears to be one of the factors controlling their bioavailability to biota.

A novel approach for acid mine drainage pollution biomonitoring using rare earth elements bioaccumulated in the freshwater clam Corbicula fluminea.

Science.gov (United States)

Bonnail, Estefanía; Pérez-López, Rafael; Sarmiento, Aguasanta M; Nieto, José Miguel; DelValls, T Ángel

2017-09-15

Lanthanide series have been used as a record of the water-rock interaction and work as a tool for identifying impacts of acid mine drainage (lixiviate residue derived from sulphide oxidation). The application of North-American Shale Composite-normalized rare earth elements patterns to these minority elements allows determining the origin of the contamination. In the current study, geochemical patterns were applied to rare earth elements bioaccumulated in the soft tissue of the freshwater clam Corbicula fluminea after exposure to different acid mine drainage contaminated environments. Results show significant bioaccumulation of rare earth elements in soft tissue of the clam after 14 days of exposure to acid mine drainage contaminated sediment (ΣREE=1.3-8μg/gdw). Furthermore, it was possible to biomonitor different degrees of contamination based on rare earth elements in tissue. The pattern of this type of contamination describes a particular curve characterized by an enrichment in the middle rare earth elements; a homologous pattern (E MREE =0.90) has also been observed when applied NASC normalization in clam tissues. Results of lanthanides found in clams were contrasted with the paucity of toxicity studies, determining risk caused by light rare earth elements in the Odiel River close to the Estuary. The current study purposes the use of clam as an innovative "bio-tool" for the biogeochemical monitoring of pollution inputs that determines the acid mine drainage networks affection. Copyright © 2017 Elsevier B.V. All rights reserved.

Analysis of trace elements in the shells of short-necked clam Ruditapes philippinarum (Mollusca: Bivalvia) with respect to reconstruction of individual life history

International Nuclear Information System (INIS)

Arakawa, Jumpei; Sakamoto, Wataru

1998-01-01

Strontium (Sr) concentration in the shells of short-necked clams collected at different locations (Shirahama, warm area and Maizuru, cold area, Japan) was analyzed by two methods, PIXE and EPMA. The Sr concentration of external surface of shell umbo, which was made during short term at early benthic phase, was analyzed by PIXE, and was ranged from 1000 to 3500 ppm for individuals. The Sr concentration of clams collected at Shirahama showed positive correlation with shell length (SL) in individuals with SL < 31 mm, whereas clams collected at Maizuru did not show significant correlation. This result may be caused from the difference of the spawning seasons between two areas. The Sr concentration of cross section of shell umbo, which develops thicker continuously during their life to form faint stratum structure, was analyzed by EPMA along the line across the stratum structure. Some surges and long term waving patterns of the Sr concentration were observed. These results suggest that the life histories of individual clams could be recorded in the shell umbo cross sections as variations of trace elements and analyses of trace elements could clarify the histories of individual clams. (author)

Intersex related gene expression profiles in clams Scrobicularia plana: Molecular markers and environmental application

International Nuclear Information System (INIS)

Ciocan, Corina M.; Cubero-Leon, Elena; Langston, William J.; Pope, Nick; Cornelius, Keith; Hill, E.M.; Alvarez-Munoz, Diana; Indiveri, Paolo; Lerebours, Adelaide; Minier, Christophe; Rotchell, Jeanette M.

2015-01-01

Highlights: • Expression of intersex-related genes was analysed in clam gonads sampled from the Channel. • Genes were differentially expressed at sites with varying levels of intersex and contaminants. • Correlations between gene expressions, key contaminants and sampling sites were identified. • No single gene expression studied correlated with intersex incidence. - Abstract: Intersex, the appearance of female characteristics in male gonads, has been identified in several aquatic species. It is a widespread phenomenon in populations of the bivalve, Scrobicularia plana, from the southwest coast of the U.K. Genes previously identified as differentially expressed (ferritin, testicular haploid expressed gene, THEG, proliferating cell nuclear antigen, PCNA; receptor activated protein kinase C, RACK; cytochrome B, CYB; and cytochrome c oxidase 1, COX1) in intersex clams relative to normal male clams, were selected for characterisation and an environmental survey of the Channel region. Transcripts were significantly differentially expressed at sites with varying intersex incidence and contaminant burdens. Significant correlations between specific gene expressions, key contaminants and sampling locations have been identified, though no single gene was associated with intersex incidence. The results highlight the difficulty in understanding the intersex phenomenon in molluscs where there is still a lack of knowledge on the control of normal reproduction

Histopathology and stress biomarkers in the clam Venerupis philippinarum from the Venice Lagoon (Italy).

Science.gov (United States)

Boscolo Papo, Michele; Bertotto, Daniela; Quaglio, Francesco; Vascellari, Marta; Pascoli, Francesco; Negrato, Elena; Binato, Giovanni; Radaelli, Giuseppe

2014-07-01

The aim of this study was to evaluate the histomorphology and the stress response in the bivalve Venerupis philippinarum sampled in four differently polluted sites of the Venice Lagoon (Palude del Monte, Marghera, Ca' Roman and Val di Brenta). This species is often used as bioindicator of environmental pollution since it can bioaccumulate a large variety of pollutants because of its filter feeding. Chemical analyses for heavy metals (Cd, Cu, Hg and Pb) and polycyclic aromatic hydrocarbons (PAHs) were performed on whole soft tissues of V. philippinarum. The histological evaluation of clams revealed the presence of Perkinsus sp. infection in animals from all sites, although a very high prevalence of parasites was evidenced in clams from Ca' Roman. Perkinsus sp. were systemically distributed in the mantle, in the intestine and digestive gland, in gonads and gills. The trophozoites of Perkinsus sp. were found isolated or in cluster surrounded by a heavy hemocitical response. Haemocytes always exhibited an immunopositivity to cytochrome P4501A (CYP1A), heat shock protein 70 (HSP70), 4-hydroxy-2-nonenal (HNE) and nitrotyrosine (NT) antibodies. The digestive gland of animals from Palude del Monte showed the highest malondialdehyde (MDA) concentration, whereas clams from Ca' Roman exhibited the highest quantity of metallothioneins. Copyright © 2014 Elsevier Ltd. All rights reserved.

Development of a Taqman real-time PCR assay for rapid detection and quantification of Vibrio tapetis in extrapallial fluids of clams

Directory of Open Access Journals (Sweden)

Adeline Bidault

2015-12-01

Full Text Available The Gram-negative bacterium Vibrio tapetis is known as the causative agent of Brown Ring Disease (BRD in the Manila clam Venerupis (=Ruditapes philippinarum. This bivalve is the second most important species produced in aquaculture and has a high commercial value. In spite of the development of several molecular methods, no survey has been yet achieved to rapidly quantify the bacterium in the clam. In this study, we developed a Taqman real-time PCR assay targeting virB4 gene for accurate and quantitative identification of V. tapetis strains pathogenic to clams. Sensitivity and reproducibility of the method were assessed using either filtered sea water or extrapallial fluids of clam injected with the CECT4600T V. tapetis strain. Quantification curves of V. tapetis strain seeded in filtered seawater (FSW or extrapallial fluids (EF samples were equivalent showing reliable qPCR efficacies. With this protocol, we were able to specifically detect V. tapetis strains down to 1.125 101 bacteria per mL of EF or FSW, taking into account the dilution factor used for appropriate template DNA preparation. This qPCR assay allowed us to monitor V. tapetis load both experimentally or naturally infected Manila clams. This technique will be particularly useful for monitoring the kinetics of massive infections by V. tapetis and for designing appropriate control measures for aquaculture purposes.

Photosymbiotic Giant Clams are Transformers of Solar Flux

Science.gov (United States)

2014-01-01

function to forward-scatter light reflected from high albedo sand or from the highly reflec- tive clam shell itself (M. Lim 2014, personal communication...grains: aggregates made of crystalline water ice . Icarus 215, 682–694. (doi:10.1016/j.icarus.2011.04.011) 17. Denton EJ, Land MF. 1971 Mechanism of...2005.50.5.1490) 29. McFarland WN, Munz FW. 1975 Part II: the photic environment of clear tropical seas during the day. Vis. Res. 15, 1063–1070. (doi

Triangular gold nanoparticles modify shell characteristics and increase antioxidant enzyme activities in the clam Ruditapes decussatus.

Science.gov (United States)

Abdelhafidh, Khazri; Badreddine, Sellami; Mezni, Amine; Mouhamed, Dellali; Wiem, Saidani; Imen, Bouzidi; David, Sheehan; Mahmoudi, Ezzeddine; Hamouda, Beyrem

2018-04-19

Nanoparticles may cause adverse environmental effects but there is limited information on their interactions with marine organisms. Our aim was to examine the effects of triangular gold nanoparticles (Tr-Au NPs) on the clam, Ruditapes decussatus. Clams were exposed to Tr-Au1 = 5 µg/L and Tr-Au2 = 10 µg/L for 2 and 7 days. Effects on shell structure were investigated. Superoxide dismutase (SOD), catalase (CAT), glutathione transferase (GST) activities, protein carbonyl levels and malondialdehyde content were used to assess biochemical status. Transmission electron microscopy (TEM) and electron dispersive X-ray microanalysis (EDX) showed that Tr-Au NPs modified shell structure and morphology. Tr-Au NPs size increased forming aggregate particles. Tr-Au NPs increased SOD, CAT and GST activities in gill and digestive gland in a concentration- and time-dependent manner indicating defence against oxidative stress. Enhanced lipid peroxidation and protein carbonyl levels confirmed oxidative stress. Tr-Au NPs cause oxidative stress and affect shell structure of clams. These findings may have relevance to other marine species.

Changes in fatty acid composition in the giant clam Tridacna maxima in response to thermal stress.

Science.gov (United States)

Dubousquet, Vaimiti; Gros, Emmanuelle; Berteaux-Lecellier, Véronique; Viguier, Bruno; Raharivelomanana, Phila; Bertrand, Cédric; Lecellier, Gaël J

2016-10-15

Temperature can modify membrane fluidity and thus affects cellular functions and physiological activities. This study examines lipid remodelling in the marine symbiotic organism, Tridacna maxima, during a time series of induced thermal stress, with an emphasis on the morphology of their symbiont Symbiodinium First, we show that the French Polynesian giant clams harbour an important proportion of saturated fatty acids (SFA), which reflects their tropical location. Second, in contrast to most marine organisms, the total lipid content in giant clams remained constant under stress, though some changes in their composition were shown. Third, the stress-induced changes in fatty acid (FA) diversity were accompanied by an upregulation of genes involved in lipids and ROS pathways. Finally, our microscopic analysis revealed that for the giant clam's symbiont, Symbiodinium, thermal stress led to two sequential cell death processes. Our data suggests that the degradation of Symbiodinium cells could provide an additional source of energy to T maxima in response to heat stress. © 2016. Published by The Company of Biologists Ltd.

Acidified seawater increases accumulation of cobalt but not cesium in manila clam Ruditapes philippinarum.

Science.gov (United States)

Sezer, Narin; Kocaoğlan, Hasan Oğuz; Kılıç, Önder; Lacoue-Labarthe, Thomas; Belivermiş, Murat

2018-04-01

The pH of seawater around the world is expected to continue its decline in the near future in response to ocean acidification that is driven by heightened atmospheric CO 2 emissions. Concomitantly, economically-important molluscs that live in coastal waters including estuaries and embayments, may be exposed to a wide assortment of contaminants, including trace metals and radionuclides. Seawater acidification may alter both the chemical speciation of select elements as well as the physiology of organisms, and may thus pose at risk to many shellfish species, including the manila clam Ruditapes philippinarum. The bioconcentration efficiency of two common radionuclides associated with the nuclear fuel cycle, 134 Cs and 57 Co, were investigated by exposing live clams to dissolved 134 Cs and 57 Co at control (pH = 8.1) and two lowered pH (pH = 7.8 and 7.5) levels using controlled aquaria. The uptake and depuration kinetics of the two radionuclides in the whole-body clam were followed for 21 and 35 days, respectively. At steady-state equilibrium, the concentration factor (CF ss ) for 57 Co increased as the pH decreased (i.e. 130 ± 5, 194 ± 6, and 258 ± 10 at pH levels 8.1, 7.8 and 7.5, respectively), whereas the 134 Cs uptake was not influenced by a change in pH conditions. During depuration, the lowest depuration rate constant of 57 Co by the manila clam was observed at the intermediate pH of 7.8. An increase in the accumulation of 57 Co at the intermediate pH value was thought to be caused mainly by the aragonitic shell of the clam, as well as the low salinity and alkalinity of seawater used in the experiment. Considering that accumulation consists of uptake and depuration, among the three pH conditions moderately acidified seawater enhanced most the accumulation of 57 Co. Accumulation of 134 Cs was not strongly influenced by a reduced pH condition, as represented by an analogous uptake constant rate and CF ss in each treatment. Such results suggest that

Morphological and functional characterization of hemocytes from two deep-sea vesicomyid clams Phreagena okutanii and Abyssogena phaseoliformis.

Science.gov (United States)

Tame, Akihiro; Ozawa, Genki; Maruyama, Tadashi; Yoshida, Takao

2018-03-01

Deep-sea vesicomyid clams harboring intracellular symbiotic sulfur-oxidizing bacteria are often dominant in chemosynthetic animal communities. Although they are known to have erythrocytes, little is known about other hemocytes. To investigate the types and roles of various hemocytes in vesicomyid clams, we performed morphological, histochemical and functional characterization of the hemocytes in two species, Phreagena okutanii, collected from 873 to 978 m depth, and Abyssogena phaseoliformis, from 5199 to 5355 m. Both were found to have three types of hemocytes: erythrocytes (ERCs), eosinophilic granulocytes (EGs), and basophilic granulocytes (BGs). The ERCs contain hemoglobin in the cytoplasm, with basophilic vacuoles containing acid polysaccharide, neutral lipids, and peroxidase. The EGs were found to contain acid polysaccharides and eosinophilic granules containing lysosomal enzymes, acid and alkaline phosphatases, chloroacetate esterase, and peroxidase. Although BGs had some basophilic granules with alkaline phosphatase, they lacked acid phosphatase and acid polysaccharides. The EGs and BGs were shown to have phagocytic ability, while the ERCs exhibited no phagocytosis. The EGs showed higher phagocytic activity as well as a higher phagosome-lysosome fusion rate than BGs. The hemocytes of the two vesicomyid species differed in the intracellular structures. In A. phaseoliformis, ERCs additionally contained neutral polysaccharides in vacuoles and had vesicles with acinus-like acidic mucus in the cytoplasm, neither of which were observed in P. okutanii. The eosinophilic granules in the EGs had heteromorphically-elongated shapes containing homogeneously electron-dense material in P. okutanii, but were more spherical and composed of fibrous structures in A. phaseoliformis. The difference in hemocytes between the two clams seems to be reflective of phylogenetically differentiated lineages adapting to differing conditions in their respective deep-sea environments

Biomarker responses and contamination levels in the clam Ruditapes philippinarum for biomonitoring the Lagoon of Venice (Italy).

Science.gov (United States)

Matozzo, Valerio; Binelli, Andrea; Parolini, Marco; Locatello, Lisa; Marin, Maria Gabriella

2010-03-01

A multibiomarker approach was used to assess effects of environmental contaminants in the clam Ruditapes philippinarum from the Lagoon of Venice. Bivalves were collected in 8 sites of the Lagoon (Campalto, Marghera, Palude del Monte, Valle di Brenta, Cà Roman, San Servolo, Fusina and Canale Dese), differently influenced by both anthropogenic impact and natural conditions. The following biomarkers were chosen: total haemocyte count and lysozyme activity in cell-free haemolymph as immunomarkers, acetylcholinesterase activity in gills as a biomarker of exposure to neurotoxic compounds, vitellogenin-like protein levels in both digestive gland and cell-free haemolymph as a biomarker of exposure to estrogenic compounds, and survival-in-air widely used to evaluate general stress conditions in clams. In addition, polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), 1,1,1-Trichloro-2,2-bis(p-chlorophenyl)ethane (p,p'-DDT) and its breakdown products (DDE, DDD), hexachlorobenzene (HCB) and hexachlorocyclohexane (HCH) were measured in clams. Results demonstrated that the integrated approach between biomarkers and chemical analyses in R. philippinarum is a useful tool in biomonitoring the Lagoon of Venice. The biomarker responses suggested quite similar contamination levels in the entire Lagoon, although the relative impact of differing classes of pollutants changed among sites according to potential sources, as chemical analyses demonstrated. Overall, among the sampling sites investigated, Palude del Monte can represent an environmental risk area, bearing in mind its peculiar use for clam culture.

Comprehensive hard materials

CERN Document Server

2014-01-01

Comprehensive Hard Materials deals with the production, uses and properties of the carbides, nitrides and borides of these metals and those of titanium, as well as tools of ceramics, the superhard boron nitrides and diamond and related compounds. Articles include the technologies of powder production (including their precursor materials), milling, granulation, cold and hot compaction, sintering, hot isostatic pressing, hot-pressing, injection moulding, as well as on the coating technologies for refractory metals, hard metals and hard materials. The characterization, testing, quality assurance and applications are also covered. Comprehensive Hard Materials provides meaningful insights on materials at the leading edge of technology. It aids continued research and development of these materials and as such it is a critical information resource to academics and industry professionals facing the technological challenges of the future. Hard materials operate at the leading edge of technology, and continued res...

CLAM - CoLlAborative eMbedded networks for submarine surveillance: An overview

NARCIS (Netherlands)

Meratnia, Nirvana; Havinga, Paul J.M.; Casari, Paolo; Petrioli, Chiara; Grythe, Knut; Husoy, Thor; Zorzi, Michele

2011-01-01

This paper provides an overview of the CLAM project, which aims at developing a collaborative embedded monitoring and control platform for submarine surveillance by combining cutting edge acoustic vector sensor technology and 1D, 2D, 3D sensor arrays, underwater wireless sensor networks protocol

Effect of weld spacing on microstructure and mechanical properties of CLAM electron beam welding joints

Energy Technology Data Exchange (ETDEWEB)

Zhai, Yutao; Huang, Bo, E-mail: aufa0007@163.com; Zhang, Junyu; Zhang, Baoren; Liu, Shaojun; Huang, Qunying

2016-11-15

Highlights: • The welded joints of CLAM steel with different weld spacings have been fabricated with electron beam welding, and a simplified model of CLAM sheet was proposed. • The microstructure and mechanical properties such as microhardness, impact and tensile were investigated at different welding spacing for both conditions of as-welded and post weld heat treatment (PWHT). • The effect of the welding thermal cycle was significantly when the weld spacings were smaller than 4 mm. • When the weld spacing was small enough, the original microstructures would be fragmented with the high heat input. - Abstract: China low activation martensitic (CLAM) steel has been chosen as the primary structural material in the designs of dual function lithium-lead (DFLL) blanket for fusion reactors, China helium cooled ceramic breeder (HCCB) test blanket module (TBM) for ITER and China fusion engineering test reactor (CFETR) blanket. The cooling components of the blankets are designed with high density cooling channels (HDCCs) to remove the high nuclear thermal effectively. Hence, the welding spacing among the channels are small. In this paper, the welded joints of CLAM steel with different weld spacings have been fabricated with electron beam welding (EBW). The weld spacing was designed to be 2 mm, 3 mm, 4 mm, 6 mm and 8 mm. The microstructure and mechanical properties such as microhardness, impact and tensile were investigated at different welding spacing for both conditions of as-welded and post weld heat treatment (PWHT). The PWHT is tempering at 740 °C for 120 min. The results showed that the grain size in the heat affected zone (HAZ) increased with the increasing weld spacing, and the joint with small weld spacing had a better performance after PWHT. This work would give useful guidance to improve the preparation of the cooling components of blanket.

Heavy metal concentrations in the razor clams (Solen spp.) from Muara Tebas, Sarawak

International Nuclear Information System (INIS)

Devagi Kanakaraju; Connie Jios; Shabdin Mohd Long

2008-01-01

The razor clams (Solen spp) or locally known as ambal in Sarawak collected from Muara Tebas were studied for their heavy metals contents in tissues and shells. Sediment samples were also tested for their metal contents. Concentrations of Pb, Fe, Zn, Cu, Cd and Mn were determined by using Flame Atomic Absorption Spectrophotometer (FAAS). Tissues of razor clams showed highest concentrations of Fe and Zn, while shells accumulated highest concentrations of Pb and Mn. The lowest metal concentrations found were Cu and Cd. In general, the levels of metals in ambal were within the permissible limit recommended by international standard, the Food and Agricultural Organization (FAO). However, the study revealed that the sediments at Muara Tebas fall under the category of slightly polluted (for Pb) when compared to the guidelines suggested by United States Environment Protection Agency (USEPA). (author)

Second generation wave energy device - the clam concept

Energy Technology Data Exchange (ETDEWEB)

Bellamy, N.W.

1981-01-01

A device concept is presented which has arisen from a system approach adopted by a research group with considerable experience in the discipline of wave energy. The Clam, which can be classified as a spine-based pneumatic terminator, is deemed to be a second generation wave energy device in that it tries to utilize system components already identified as attractive, while at the same time avoiding known problem areas. A working model of this wave power device at an engineering scale is discussed for trials in real waves. 3 refs.

Modeling habitat suitability of the invasive clam Corbicula fluminea in a Neotropical shallow lagoon, southern Brazil

Directory of Open Access Journals (Sweden)

T. C. L. Silveira

Full Text Available Abstract This study aimed to model the habitat suitability for an invasive clam Corbicula fluminea in a coastal shallow lagoon in the southern Neotropical region (–30.22, –50.55. The lagoon (19km2, maximum deep 2.5m was sampled with an Ekman dredge in an orthogonal matrix comprising 84 points. At each sampling point, were obtained environmental descriptors as depth, organic matter content (OMC, average granulometry (Avgran, and the percentage of sand (Pcsand. Prediction performance of Generalized Linear Models (GLM, Generalized Additive Models (GAM and Boosted Regression Tree (BRT were compared. Also, niche overlapping with other native clam species (Castalia martensi, Neocorbicula limosa and Anodontites trapesialis was examined. A BRT model with 1400 trees was selected as the best model, with cross-validated correlation of 0.82. The relative contributions of predictors were Pcsand-42.6%, OMC-35.8%, Avgran-10.9% and Depth-10.8%. Were identified that C. fluminea occur mainly in sandy sediments with few organic matter, in shallow areas nor by the shore. The PCA showed a wide niche overlap with the native clam species C. martensi, N. limosa and A. trapesialis.

Toxicological effects induced by cadmium in gills of Manila clam ruditapes philippinarum using NMR-based metabolomics

Energy Technology Data Exchange (ETDEWEB)

Zhang, Linbao; Liu, Xiaoli; You, Liping; Zhou, Di [Key Laboratory of Coastal Zone Environment Processes, CAS, Shandong Provincial Key Laboratory of Coastal Zone Environment Processes, Yantai Institute of Coastal Zone Research, Chinese Academy of Sciences, Yantai (China); The Graduate School of Chinese Academy of Sciences, Beijing (China); Yu, Junbao; Zhao, Jianmin; Wu, Huifeng [Key Laboratory of Coastal Zone Environment Processes, CAS, Shandong Provincial Key Laboratory of Coastal Zone Environment Processes, Yantai Institute of Coastal Zone Research, Chinese Academy of Sciences, Yantai (China); Feng, Jianghua [Department of Electronic Science, Fujian Key Laboratory of Plasma and Magnetic Resonance, State Key Laboratory of Physical Chemistry of Solid Surfaces, Xiamen University, Xiamen (China)

2011-11-15

Cadmium (Cd) has become an important heavy metal contaminant in the sediment and seawater along the Bohai Sea and been of great ecological risk due to its toxic effects to marine organisms. In this work, the toxicological effects caused by environmentally relevant concentrations (10 and 40 {mu}g L{sup -1}) of Cd were studied in the gill tissues of Manila clam Ruditapes philippinarum after exposure for 24, 48, and 96 h. Both low (10 {mu}g L{sup -1}) and high (40 {mu}g L{sup -1}) doses of Cd caused the disturbances in energy metabolism and osmotic regulation and neurotoxicity based on the metabolic biomarkers such as succinate, alanine, branched chain amino acids, betaine, hypotaurine, and glutamate in clam gills after 24 h of exposure. However, the recovery of toxicological effects of Cd after exposure for 96 h was obviously observed in clam to Cd exposures. Overall, these results indicated that NMR-based metabolomics was applicable to elucidate the toxicological effects of heavy metal contaminants in the marine bioindicator. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Tropomyosin and Actin Identified as Major Allergens of the Carpet Clam (Paphia textile and the Effect of Cooking on Their Allergenicity

Directory of Open Access Journals (Sweden)

Zailatul Hani Mohamad Yadzir

2015-01-01

Full Text Available Objectives. To identify the major allergenic proteins of clam (Paphia textile and to investigate the effect of different cooking methods on the allergenicity of these identified proteins. Methods. Clam protein extracts were separated by denaturing polyacrylamide gel electrophoresis. IgE reactive proteins were then analyzed by immunoblotting with sera from patients with positive skin prick tests (SPT to the raw clam extract. Mass spectrometry was used to identify the major allergenic proteins of this clam. Results. Raw extract showed 12 protein bands (18–150 kDa. In contrast, fewer protein bands were seen in the boiled extract; those ranging from 40 to 150 kDa were denatured. The protein profiles were similarly altered by frying or roasting. The immunoblots of raw and boiled extracts yielded 10 and 2 IgE-binding proteins, respectively. The fried and roasted extracts showed only a single IgE-binding protein at 37 kDa. Mass spectrometry analysis of the 37 and 42 kDa major allergens indicated that these spots were tropomyosin and actin, respectively. Conclusion. The two major allergens of Paphia textile were identified as the thermostable tropomyosin and a new thermolabile allergen actin.

Methane in German hard coal mining

International Nuclear Information System (INIS)

Martens, P.N.; Den Drijver, J.

1995-01-01

Worldwide, hard coal mining is being carried out at ever increasing depth, and has, therefore, to cope with correspondingly increasing methane emissions are caused by coal mining. Beside carbon dioxide, chloro-fluoro-carbons (CFCs) and nitrogen oxides, methane is one of the most significant 'greenhouse' gases. It is mainly through the release of such trace gases that the greenhouse effect is brought about. Reducing methane emissions is therefore an important problem to be solved by the coal mining industry. This paper begins by highlighting some of the fundamental principles of methane in hard coal mining. The methane problem in German hard coal mining and the industry's efforts to reduce methane emissions are presented. The future development in German hard coal mining is illustrated by an example which shows how large methane volumes can be managed, while still maintaining high outputs at increasing depth. (author). 7 tabs., 10 figs., 20 refs

Presence of enteric viruses, bioaccumulation and stability in Anomalocardia brasiliana clams (Gmelin, 1791).

Science.gov (United States)

Souza, Doris Sobral Marques; Dominot, Ana Ferreira Ávila; Moresco, Vanessa; Barardi, Célia Regina Monte

2018-02-02

Bivalve mollusks are filter feeders and may accumulate human pathogens in their tissues. Many studies demonstrated human diseases associated with bivalve consumption, especially oysters. Anomalocardia brasiliana clams are distributed along the Brazilian coastal area and are an exotic ingredient for some typical dishes in Brazil. Even though there are several reports describing the contamination of oysters and mussels with human pathogens, there is a lack of studies reporting contamination of A. brasiliana with human pathogens. An evaluation of natural microbiological contamination in A. brasiliana samples over a period of 18months (November 2014 to April 2016) showed that the bacteria indices were in accordance with Brazilian regulations (E. colitime period. NoV GI was the most adsorbed virus after 24h. HAV concentration was time, reaching its highest values after 24h (times (0, 1, 1.5, 3 and 5mins), viral infectivity was evaluated using ICC-et-RT-qPCR. The temperature inside the DT remained time and after 5min of cooking the HAdV reached a decay of 90% (1 log 10 ). The results showed a real warn to the consumers that can be exposed to infectious human viruses if they eat these clams improperly cooked. HAV was the most detected virus in these animals, which may lead to outbreaks. A. brasiliana exhibited distinct behavior in NoV GI bioaccumulation and persistence, pointing to the need for further studies about the cellular ligands used by these viruses to become attached to these clams. Copyright © 2017. Published by Elsevier B.V.

Fracture toughness and fracture behavior of CLAM steel in the temperature range of 450 °C-550 °C

Science.gov (United States)

Zhao, Yanyun; Liang, Mengtian; Zhang, Zhenyu; Jiang, Man; Liu, Shaojun

2018-04-01

In order to analyze the fracture toughness and fracture behavior (J-R curves) of China Low Activation Martensitic (CLAM) steel under the design service temperature of Test Blanket Module of the International Thermonuclear Experimental Reactor, the quasi-static fracture experiment of CLAM steel was carried out under the temperature range of 450 °C-550 °C. The results indicated that the fracture behavior of CLAM steel was greatly influenced by test temperature. The fracture toughness increased slightly as the temperature increased from 450 °C to 500 °C. In the meanwhile, the fracture toughness at 550 °C could not be obtained due to the plastic deformation near the crack tip zone. The microstructure analysis based on the fracture topography and the interaction between dislocations and lath boundaries showed two different sub-crack propagation modes: growth along 45° of the main crack direction at 450 °C and growth perpendicular to the main crack at 500 °C.

Standard hardness conversion tables for metals relationship among brinell hardness, vickers hardness, rockwell hardness, superficial hardness, knoop hardness, and scleroscope hardness

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 Conversion Table 1 presents data in the Rockwell C hardness range on the relationship among Brinell hardness, Vickers hardness, Rockwell hardness, Rockwell superficial hardness, Knoop hardness, and Scleroscope hardness of non-austenitic steels including carbon, alloy, and tool steels in the as-forged, annealed, normalized, and quenched and tempered conditions provided that they are homogeneous. 1.2 Conversion Table 2 presents data in the Rockwell B hardness range on the relationship among Brinell hardness, Vickers hardness, Rockwell hardness, Rockwell superficial hardness, Knoop hardness, and Scleroscope hardness of non-austenitic steels including carbon, alloy, and tool steels in the as-forged, annealed, normalized, and quenched and tempered conditions provided that they are homogeneous. 1.3 Conversion Table 3 presents data on the relationship among Brinell hardness, Vickers hardness, Rockwell hardness, Rockwell superficial hardness, and Knoop hardness of nickel and high-nickel alloys (nickel content o...

Creep deformation and rupture behavior of CLAM steel at 823 K and 873 K

Science.gov (United States)

Zhong, Boyu; Huang, Bo; Li, Chunjing; Liu, Shaojun; Xu, Gang; Zhao, Yanyun; Huang, Qunying

2014-12-01

China Low Activation Martensitic (CLAM) steel is selected as the candidate structural material in Fusion Design Study (FDS) series fusion reactor conceptual designs. The creep property of CLAM steel has been studied in this paper. Creep tests have been carried out at 823 K and 873 K over a stress range of 150-230 MPa. The creep curves showed three creep regimes, primary creep, steady-state creep and tertiary creep. The relationship between minimum creep rate (ε˙min) and the applied stress (σ) could be described by Norton power law, and the stress exponent n was decreased with the increase of the creep temperature. The creep mechanism was analyzed with the fractographes of the rupture specimens which were examined by scanning electron microscopy (SEM). The coarsening of precipitates observed with transmission electron microscope (TEM) indicated the microstructural degradation after creep test.

Creep deformation and rupture behavior of CLAM steel at 823 K and 873 K

International Nuclear Information System (INIS)

Zhong, Boyu; Huang, Bo; Li, Chunjing; Liu, Shaojun; Xu, Gang; Zhao, Yanyun; Huang, Qunying

2014-01-01

China Low Activation Martensitic (CLAM) steel is selected as the candidate structural material in Fusion Design Study (FDS) series fusion reactor conceptual designs. The creep property of CLAM steel has been studied in this paper. Creep tests have been carried out at 823 K and 873 K over a stress range of 150–230 MPa. The creep curves showed three creep regimes, primary creep, steady-state creep and tertiary creep. The relationship between minimum creep rate (ε-dot min ) and the applied stress (σ) could be described by Norton power law, and the stress exponent n was decreased with the increase of the creep temperature. The creep mechanism was analyzed with the fractographes of the rupture specimens which were examined by scanning electron microscopy (SEM). The coarsening of precipitates observed with transmission electron microscope (TEM) indicated the microstructural degradation after creep test

Prevalence and Density of Digenetic Trematode Metacercariae in Clams and Oysters from Western Coastal Regions of the Republic of Korea.

Science.gov (United States)

Sohn, Woon-Mok; Na, Byoung-Kuk; Cho, Shin-Hyeong; Lee, Won-Ja

2017-08-01

A survey was performed to know the recent infection status of digenetic trematode metacercariae in clams and oysters from 4 sites in western coastal regions of the Republic of Korea (=Korea). Four species of clams (Mactra veneriformis, Ruditapes philippinarum, Cyclina sinensis, and Saxidomus purpuratus) were collected from Taean-gun, Chungcheongnam-do (Province), Buan-gun (County) and Gochang-gun, Jeollabuk-do, and oysters, Crassostrea gigas, from Shinan-gun, Jeollanam-do were transferred to our laboratory on ice and examined by the artificial digestion method. The metacercariae of Himasthla alincia were detected in 3 species of clams, M. veneriformis, R. philippinarum, and C. sinensis from the 3 surveyed areas. The positive rate and the mean density per clam infected were 98.9% (30.8 metacercariae) in M. veneriformis, 60.0% (5.0) in R. philippinarum, and 96.0% (28.4) in C. sinensis. The positive rate (mean density) of Acanthoparyphium tyosenense metacercariae in M. veneriformis was 50.0% (2.1) from Taean-gun and 70.0% (2.8) from Gochang-gun. The metacercariae of Parvatrema spp. were detected in M. veneriformis and R. philippinarum from Taean-gun and Gochang-gun; the positive rate (mean density) was 63.3% (4,123) and 50.0% (19) in M. veneriformis, and 6.7% (126) and 100% (238) in R. philippinarum from the 2 regions, respectively. The metacercariae of Gymnophalloides seoi were detected in all 30 oysters from Shinan-gun, and their average density per oyster was 646. From the above results, it has been confirmed that more than 3 species of metacercariae are prevalent in clams from the western coastal regions, and G. seoi metacercariae are still prevalent in oysters from Shinan-gun, Jeollanam-do, Korea.

Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Research results of hard photon technology have been summarized as a part of novel technology development highly utilizing the quantum nature of photon. Hard photon technology refers to photon beam technologies which use photon in the 0.1 to 200 nm wavelength region. Hard photon has not been used in industry due to the lack of suitable photon sources and optical devices. However, hard photon in this wavelength region is expected to bring about innovations in such areas as ultrafine processing and material synthesis due to its atom selective reaction, inner shell excitation reaction, and spatially high resolution. Then, technological themes and possibility have been surveyed. Although there are principle proposes and their verification of individual technologies for the technologies of hard photon generation, regulation and utilization, they are still far from the practical applications. For the photon source technology, the laser diode pumped driver laser technology, laser plasma photon source technology, synchrotron radiation photon source technology, and vacuum ultraviolet photon source technology are presented. For the optical device technology, the multi-layer film technology for beam mirrors and the non-spherical lens processing technology are introduced. Also are described the reduction lithography technology, hard photon excitation process, and methods of analysis and measurement. 430 refs., 165 figs., 23 tabs.

Shell Shape Analysis and Spatial Allometry Patterns of Manila Clam (Ruditapes philippinarum in a Mesotidal Coastal Lagoon

Directory of Open Access Journals (Sweden)

Nathalie Caill-Milly

2012-01-01

Full Text Available While gradual allometric changes of shells are intrinsically driven by genotype, morphometrical shifts can also be modulated by local environmental conditions. Consequently the common use of a unique dimension (usually length to assess bivalves’ growth may mask phenotypic differences in valve shape among populations. A morphometric exhaustive study was conducted on Manila clam, Ruditapes philippinarum, by acquiring data in the French Arcachon Bay (intrasite phenotypic variability and by comparing with other sites in the literature (intersite phenotypic variability. 2070 shells were subsampled, weighted, and automatically measured using TNPC software. Some ratios’ values indicate a relatively round and globular shape shell in comparison with other sites confirming poor conditions for some individuals. Among adult clams, three main morphological groups were identified and discussed according to spatial considerations. Allometric relations for pairs of shell descriptors were determined by testing classical linear and piecewise regression models on log-transformed relation of Huxley. A significant shape change correlated to size was observed; it corresponds to the second year of life of the clam. Relationships between density, disease, and shell shape are demonstrated and discussed related to other potential factors affecting shell shape. Finally, consequences on population regulation are addressed.

Effect of Tantalum content on the low cycle fatigue properties of CLAM steel at 823 K

Energy Technology Data Exchange (ETDEWEB)

Zhai, Xiangwei [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China); Liu, Shaojun, E-mail: shaojun.liu@fds.org.cn [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); Zhao, Yanyun; Wang, Kun [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China)

2017-01-15

Highlights: • The fatigue life initially decreased and then increased as the Ta content was increased from 0.027 wt% to 0.18 wt%. • The softening rate had declined with Ta content increased and the reduced softening rate was attributed to the increased number of Ta-rich MX particles. • The grain size and M{sub 23}C{sub 6} were closely associated with the Ta content. • The crack distribution was quite sensitive to the Ta content. - Abstract: The effect of tantalum (Ta) content on the low cycle fatigue (LCF) properties of CLAM steel at 823 K was investigated in this paper. Low cycle fatigue tests were carried out on four ingots of CLAM steel with Ta contents of 0.027 wt%, 0.078 wt%, 0.15 wt% and 0.18 wt%, respectively. The results showed that the fatigue life and softening behavior of CLAM steel were influenced by Ta content. The fatigue life initially decreased and then increased as the Ta content was increased from 0.027 wt% to 0.18 wt%. The softening rate had declined with Ta content increased and the reduced softening rate was attributed to the increased number of Ta-rich MX particles.

Identification of larvae: The zebra mussel (Dreissena polymorpha), quagga mussel (Dreissena rosteriformis bugensis), and Asian clam (Corbicula fluminea)

Science.gov (United States)

Nichols, S. Jerrine; Black, M.G.

1994-01-01

There are presently four freshwater bivalves in the United States that produce larvae or veligers commonly found in the water column: two forms of Asian clams and two species of dreissenids. Portions of the geographic range of three of these bivalves, one species of Asian clam (Corbicula fluminea), zebra mussels (Dreissena polymorpha), and quagga mussels (Dreissena rosteriformis bugensis), overlap, causing problems with larval identification. To determine which characteristics can be used to separate larval forms, adult Asian clams, quaggas, and zebra mussels were brought into the laboratory and induced to spawn, and the resulting larvae were reared. Hybrids between quaggas and zebra mussels were also produced, but not reared to maturity. Characteristics allowing for the most rapid and accurate separation of larvae were hinge length, shell length/height, shell shape, shell size, and the presence or absence of a foot and velum. These characteristics were observed in laboratory-reared larvae of known parentage and field-caught larvae of unknown parentage. In most cases, larvae of the Asian clam can be readily separated from those produced by either type of dreissenid on the basis of shell size and presence of a foot. Separating the gametes and embryos of the two types of dreissenids is not possible, but after shell formation, most of the larval stages can be distinguished. Hinge length, shell length/height, and the similarity in size of the shell valves can be used to separate straight-hinged, umbonal, pediveliger, and plantigrade larvae. Quagga × zebra mussel hybrids show characteristics of both parents and are difficult to identify.

Toxicity and the fractional distribution of trace metals accumulated from contaminated sediments by the clam Scrobicularia plana exposed in the laboratory and the field

Energy Technology Data Exchange (ETDEWEB)

Kalman, J., E-mail: judit.kalman@uca.es [Department of Life Sciences, The Natural History Museum, Cromwell Road, London SW7 5BD (United Kingdom); Bonnail-Miguel, E. [Department of Physical-Chemistry, University of Cadiz, Poligono Industrial Rio San Pedro s/n, 11,510 Puerto Real, Cadiz (Spain); Smith, B.D. [Department of Life Sciences, The Natural History Museum, Cromwell Road, London SW7 5BD (United Kingdom); Bury, N.R. [Division of Diabetes and Nutritional Science, King' s College London, Franklin-Wilkins Building, 150 Stamford Street, London SE1 9NH (United Kingdom); Rainbow, P.S. [Department of Life Sciences, The Natural History Museum, Cromwell Road, London SW7 5BD (United Kingdom)

2015-02-15

The relationship between the subcellular distribution of accumulated toxic metals into five operational fractions (subsequently combined into presumed detoxified and non-detoxified components) and toxicity in the clam Scrobicularia plana was investigated under different laboratory exposures. Clams were exposed to metal contaminated media (water and diet) and analysed for the partitioning of accumulated As, Cu and Zn into subcellular fractions. In general, metallothionein-like proteins, metal-rich granules and cellular debris in different proportions acted as main storage sites of accumulated metals in the clam soft tissues for these three metals. No significant differences were noted in the accumulation rates of As, Cu and Zn of groups of individuals with or without apparent signs of toxicity after up to 30 days of exposure to naturally contaminated sediment mixtures. There was, however, an increased proportional accumulation of Cu in the non-detoxified fraction with increased Cu accumulation rate in the clams, suggesting that the Cu uptake rate from contaminated sediments exceeded the combined rates of elimination and detoxification of Cu, with the subsequent likelihood for toxic effects in the clams. - Highlights: • Scrobicularia plana accumulated As, Cu and Zn from naturally toxic sediments. • Toxic metals were accumulated in detoxified and non-detoxified components. • Cu accumulation in the non-detoxified pool increased with increased Cu uptake rate. • Cu uptake rate exceeded combined loss and detoxification rates to cause toxicity.

Toxicity and the fractional distribution of trace metals accumulated from contaminated sediments by the clam Scrobicularia plana exposed in the laboratory and the field

International Nuclear Information System (INIS)

Kalman, J.; Bonnail-Miguel, E.; Smith, B.D.; Bury, N.R.; Rainbow, P.S.

2015-01-01

The relationship between the subcellular distribution of accumulated toxic metals into five operational fractions (subsequently combined into presumed detoxified and non-detoxified components) and toxicity in the clam Scrobicularia plana was investigated under different laboratory exposures. Clams were exposed to metal contaminated media (water and diet) and analysed for the partitioning of accumulated As, Cu and Zn into subcellular fractions. In general, metallothionein-like proteins, metal-rich granules and cellular debris in different proportions acted as main storage sites of accumulated metals in the clam soft tissues for these three metals. No significant differences were noted in the accumulation rates of As, Cu and Zn of groups of individuals with or without apparent signs of toxicity after up to 30 days of exposure to naturally contaminated sediment mixtures. There was, however, an increased proportional accumulation of Cu in the non-detoxified fraction with increased Cu accumulation rate in the clams, suggesting that the Cu uptake rate from contaminated sediments exceeded the combined rates of elimination and detoxification of Cu, with the subsequent likelihood for toxic effects in the clams. - Highlights: • Scrobicularia plana accumulated As, Cu and Zn from naturally toxic sediments. • Toxic metals were accumulated in detoxified and non-detoxified components. • Cu accumulation in the non-detoxified pool increased with increased Cu uptake rate. • Cu uptake rate exceeded combined loss and detoxification rates to cause toxicity

Effect of mining activities on the clam fisheries and bottom fauna of Goa estuaries

Digital Repository Service at National Institute of Oceanography (India)

Parulekar, A.H.; Ansari, Z.A.; Ingole, B.S.

Comparison of two clam beds and associated benthic fauna, in Mandovi and Cumbarjua canal estuarine system of Goa, India, severely affected by massive inputs of mining rejects, revealed that, in less than 10 years (1972-73 to 1982-83), high biotic...

Inactivation of Vibrio cholerae O1 El Tor inoculated into Peruvian ''choro'' mussels (Aulacomya ater) and two species of clams (Argopecten purpuratus and Gari solida) using medium-dose irradiation

International Nuclear Information System (INIS)

Torres, Z.; Bernuy, B.; Kahn, G.; Zapata, G.; Vivanco, M.; Guzman, E.; Leon, R.

2001-01-01

The radiation decimal reduction dose (D 10 ) for Vibrio cholerae O1 biotype El Tor inoculated through the natural feeding system into three species of bivalve mollusks from the Peruvian Pacific coast: ''choro'' mussels (Aulacome ater), ''abanico'' clams (Argopecten purpuratus), and common clams (Gari solida), was determined in vivo. The D 10 value obtained in vivo was 0.14 kGy in all mollusks tested. Concurrent studies conducted to determine the potential use of irradiation to extend the microbiological shelf-life of the mollusks during post-irradiation storage at 0-1 deg. C indicated that a dose of 1.0 kGy was optimal for choro mussels and abanico clams, whereas 2.0 kGy produced the best results when treating common clams. Shelf-life extension thus achieved was 31 days for choro mussels, 16 days for abanico clams, and 21 days for common clams. Non-irradiated control samples of all mollusks spoiled after 17 days of refrigerated storage. There were no significant (p<.05) adverse effects from the application of the optimal radiation treatments on the sensory characteristics (i.e. appearance, odor, flavor, and texture) of the mollusks. Total volatile basic nitrogen (VBN) and pH values were examined for use as indexes of seafood freshness. (author)

Biomonitoring approach with mussel Mytilus galloprovincialis (Lmk) and clam Ruditapes philippinarum (Adams and Reeve, 1850) in the Lagoon of Venice.

Science.gov (United States)

Moschino, Vanessa; Delaney, Eugenia; Meneghetti, Francesca; Ros, Luisa Da

2011-06-01

Transplanted Mytilus galloprovincialis and native Ruditapes philippinarum were deployed in 10 sampling stations with different pollution impact within the Lagoon of Venice to evaluate the temporal variations and the suitability of the following cytochemical and histochemical biomarkers just as indicators of environmental stress: lysosomal membrane stability, lipofuscins, neutral lipids and lysosome to cytoplasm volume ratio. The physiological status of the organisms was also investigated by determining the survival in air capability and the reburrowing rate (clams). The biological parameters were assessed in June and October. Furthermore, for a better definition of the environmental aspects of the study sites, heavy metal, PAH and PCB concentrations were also evaluated in the sediments. As a whole, the biological responses examined in both species from all the sampling sites showed significant differences between the two seasonal campaigns, only lysosomal membrane stability exhibited less variability. Pollutants in sediments generally showed low-intermediate contamination levels, few hotspots persisting mostly in the inner areas of the lagoon, the most influenced by the industrial zone. Transplanted mussels were more responsive than native clams and the biological responses of both species varied temporally. The range of the spatial variability was always narrow and reflected only partially the broader variability shown by the chemical content in the sediments. In this sense, biological responses seemed to be particularly influenced by the high temporal and spatial heterogeneity that characterise the Lagoon of Venice, as well as most of the transitional environments.

Combined Effects of Temperature and Seston Concentration on the Physiological Energetics of the Manila Clam Ruditapes philippinarum.

Directory of Open Access Journals (Sweden)

Hee Yoon Kang

Full Text Available The suspension-feeding Manila clam Ruditapes philippinarum is a native species of the western Pacific that is now widely distributed around the globe because of its commercial importance. To determine the adaptive physiological responses to changing thermal and nutritional conditions, clearance, filtration, feces production, ammonium excretion, respiration rates, and scope for growth (SFG were measured in adult clams. The clams were exposed to 24 treatments involving the combination of four water temperatures (8, 13, 18, and 23°C and six concentrations of suspended particulate matter (SPM: 9.5 to 350.5 mg L(-1. Physiological rates were standardized by using the mean (480 mg of tissue dry weights of experimental clams using allometric equations between physiological variables and tissue dry weight. Higher clearance rates were recorded at higher temperatures and lower SPM concentrations, and these rates decreased with increasing SPM concentration at individual temperatures. Consumed energy increased with increasing temperature and SPM concentration, peaking at around 100-200 mg L(-1 at 18-23°C. Whereas fecal energy was largely determined by SPM concentration, ammonia excretion was mainly governed by temperature. Respiration rate studies revealed a predominant quadratic effect of temperature on the metabolism, indicating a lack of acclimatory adjustment of metabolic rate to rising temperature. SFG values were positive under almost all the treatment conditions and were much higher at higher SPM concentrations (> 45 mg L(-1, with the highest level being recorded at 18°C and 100-200 mg L(-1 SPM. Increased filtration rate offset the increased metabolic cost at warm temperatures. Our holistic findings suggest that a high degree of physiological plasticity allows R. philippinarum to tolerate the wide range of temperatures and SPM concentrations that are found in tidal flats, accounting in part for the successful distribution of this species over a

Microcystin uptake and biochemical responses in the freshwater clam Corbicula leana P. exposed to toxic and non-toxic Microcystis aeruginosa: Evidence of tolerance to cyanotoxins.

Science.gov (United States)

Pham, Thanh-Luu; Shimizu, Kazuya; Dao, Thanh-Son; Hong-Do, Lan-Chi; Utsumi, Motoo

2015-01-01

We investigated the accumulation and adverse effects of toxic and non-toxic Microcystis in the edible clam Corbicula leana . Treated clams were exposed to toxic Microcystis at 100 μg of MC (microcystin)-LR eq  L -1 for 10 days. The experimental organism was then placed in toxin-free water and fed on non-toxic Microcystis for the following 10 days for depuration. Filtering rates (FRs) by C. leana of toxic and non-toxic Microcystis and of the green alga Chlorella vulgaris as a control were estimated. Adverse effects were evaluated though the activity of catalase (CAT), superoxide dismutase (SOD) and glutathione S-transferase (GST). Clam accumulated MCs (up to 12.7 ± 2.5 μg g -1 dry weight (DW) of free MC and 4.2 ± 0.6 μg g -1 DW of covalently bound MC). Our results suggest that although both toxic and non-toxic cyanobacteria caused adverse effects by inducing the detoxification and antioxidant defense system, the clam was quite resistant to cyanotoxins. The estimated MC concentration in C. leana was far beyond the World Health Organization's (WHO) provisional tolerable daily intake (0.04 μg kg -1  day -1 ), suggesting that consuming clams harvested during cyanobacterial blooms carries a high health risk.

Microcystin uptake and biochemical responses in the freshwater clam Corbicula leana P. exposed to toxic and non-toxic Microcystis aeruginosa: Evidence of tolerance to cyanotoxins

Directory of Open Access Journals (Sweden)

Thanh-Luu Pham

2015-01-01

Full Text Available We investigated the accumulation and adverse effects of toxic and non-toxic Microcystis in the edible clam Corbicula leana. Treated clams were exposed to toxic Microcystis at 100 μg of MC (microcystin-LReq L−1 for 10 days. The experimental organism was then placed in toxin-free water and fed on non-toxic Microcystis for the following 10 days for depuration. Filtering rates (FRs by C. leana of toxic and non-toxic Microcystis and of the green alga Chlorella vulgaris as a control were estimated. Adverse effects were evaluated though the activity of catalase (CAT, superoxide dismutase (SOD and glutathione S-transferase (GST. Clam accumulated MCs (up to 12.7 ± 2.5 μg g−1 dry weight (DW of free MC and 4.2 ± 0.6 μg g−1 DW of covalently bound MC. Our results suggest that although both toxic and non-toxic cyanobacteria caused adverse effects by inducing the detoxification and antioxidant defense system, the clam was quite resistant to cyanotoxins. The estimated MC concentration in C. leana was far beyond the World Health Organization's (WHO provisional tolerable daily intake (0.04 μg kg−1 day−1, suggesting that consuming clams harvested during cyanobacterial blooms carries a high health risk.

Distribution of haemic neoplasia of soft-shelled clams in Prince Edward Island: an examination of anthropogenic factors and effects of experimental fungicide exposure.

Science.gov (United States)

Mateo, D R; MacCallum, G S; McGladdery, S E; Davidson, J

2016-05-01

Haemic neoplasia was first considered a disease of concern for soft-shell clams in Prince Edward Island (PEI) when it was diagnosed as the cause of mass mortalities in 1999. The aetiology of the disease remains elusive, but has been associated with environmental degradation. In this study, a 2-year (2001-2002) geographic and seasonal survey was conducted for haemic neoplasia, using histology, in soft-shell clams from PEI. In addition, using geographic information system, the association between anthropogenic factors in the watersheds at sites affected by haemic neoplasia and the prevalence of the disease was investigated. Finally, histopathological changes were assessed in soft-shell clams experimentally exposed to four concentrations of chlorothalonil for 27 days. Haemic neoplasia could not be induced at any concentration of chlorothalonil. Clams exposed to a concentration of 1000 μg L(-1) of the fungicide, however, exhibited an LC50 of 17 days. Although this information provides additional toxicity information (LC50) for soft-shell clams, further experiments are required to assess longer term exposure to the fungicide. The highest prevalences of haemic neoplasia in PEI were found in North River and Miscouche (28.3-50.9% and 33.0-77.8%, respectively). No clear seasonal patterns were found. There was a correlation between haemic neoplasia prevalence and watersheds with a high percentage of potato acreage and forest coverage (P = 0.026 and P = 0.045, respectively), suggesting a link between anthropogenic activity and the prevalence of the disease. © 2015 John Wiley & Sons Ltd.

Age and growth of the sword razor clam Ensis arcuatus in the Ría de Pontevedra (NW Spain): Influence of environmental parameters

Science.gov (United States)

Hernández-Otero, A.; Gaspar, M. B.; Macho, G.; Vázquez, E.

2014-01-01

The sword razor clam Ensis arcuatus is the most important commercial species of razor clam in Spain, and its fishery in the Ría de Pontevedra (Galicia, NW Spain) is the most productive. Despite the economic importance of this species, information on its biology is scarce. This study reports shell morphometric relationships, age, and growth rates of E. arcuatus in three fishing beds in the Ría de Pontevedra (Brensa, Bueu and Ons, located in respectively the inner, middle and outer zones of the ria), providing the first estimates of growth parameters for the species in the Iberian Peninsula. Growth was estimated by examination of surface growth rings and internal shell microgrowth patterns (acetate peel technique) that proved to be the most suitable method for growth estimate. Growth of E. arcuatus was slower in Bueu (L∞ = 140.4, k = 0.40) followed by Brensa (L∞ = 151.91, k = 0.40) and Ons (L∞ = 172.7, k = 0.33), and the clams reached commercial size in 1.7, 2.3 and 2.8 years in Ons, Brensa and Bueu, respectively. The differences in growth between sites in relation to environmental parameters are evaluated and the implications for the razor clam fishery are discussed.

Atypical feeding behavior of Long-tailed Ducks in the wake of a commercial fishing boat while clamming

Science.gov (United States)

Perry, Matthew; Osenton, Peter C.; White, Timothy P.

2017-01-01

A foraging group of Clangula hyemalis (Long-tailed Duck) was observed on 10 February 2010 diving behind a commercial boat that was clamming near Monomoy Island, Nantucket Sound, MA. We used a shotgun to collect 9 of the ducks, and our analyses of gizzard and gullet (esophagus and proventriculus) revealed 37 food items in the gizzard and 16 in the gullet. Mollusca were the dominant food in the gizzard (49%), whereas Crustacea were dominant in the gullet (57%). Crustacea were the second most important food in the gizzard (38%), whereas Mollusca were the second most important food in the gullet (31%). Relatively high volumes of the Amphipoda Caprella sp. (skeleton shrimp) and the Decopoda Crangon septemspinosa (Sand Shrimp) were recorded in the gullet and gizzard. Ensis directus (Atlantic Jackknife Clam) formed the greatest volume of Mollusca in the gizzard (15%) and in the gullet (15%). Long-tailed Ducks had fed on this Bivalvia and several other species of Mollusca that had no shell or broken shell when consumed. Many of the food organisms were apparently dislodged and some damaged by the clamming operation creating an opportunistic feeding strategy for the Long-tailed Ducks.

Report on feasibility study of the Clam Wave Energy Device

Energy Technology Data Exchange (ETDEWEB)

1979-04-01

The main emphasis of the feasibility study has been towards producing an acceptable spine design for the Clam wave energy converter. Concrete and steel designs based on a mathematical model of the waveloading have been produced. Progress is also reported in the design of a bellows for a low-pressure air power transmission system. A narrow wave tank and scale model have been constructed in order to carry out a test programme on various aspects of the device's construction and performance.

A study of the naturalisation and dispersal of a non-native bivalve, the Manila clam, Ruditapes philippinarum (Adams and Reeve 1850) in estuaries along the South coast of England.

OpenAIRE

Harris, Matthew

2016-01-01

The Manila clam, Ruditapes philippinarum, was introduced into the British Isles in the 1980s for the purpose of aquaculture in order to take advantage of the rapid growth rate and high profitability of this non-native species. The decision to import the Manila clam, was based on the findings of a report commissioned by the Ministry of Agriculture Fisheries and Food which determined that the Manila clam would be able to be grown to marketable size faster than the local species Ruditapes decuss...

Compatibility of CLAM steel weldments with static LiPb alloy at 550 Degree-Sign C

Energy Technology Data Exchange (ETDEWEB)

Chen Xizhang, E-mail: kernel.chen@gmail.com [School of Materials Science and Engineering, Jiangsu University, ZhenJiang, Jiangsu 212013 (China); Shen Zheng; Li Peng [School of Materials Science and Engineering, Jiangsu University, ZhenJiang, Jiangsu 212013 (China); Madigan, Bruce [Montana Tech. of University of Montana, Butte, MT 59701 (United States); Huang Yuming; Lei Yucheng [School of Materials Science and Engineering, Jiangsu University, ZhenJiang, Jiangsu 212013 (China); Huang Qunying [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui 031 (China); Zhou Jianzhong [School of Mechanical Engineering, Jiangsu University, ZhenJiang, Jiangsu 212013 (China)

2012-09-15

Highlights: Black-Right-Pointing-Pointer Corrosion extent of weld zone is higher than that of HAZ. Black-Right-Pointing-Pointer Thick martensite lath and large residual stress lead to higher corrosion rate. Black-Right-Pointing-Pointer Cr on the surface of weld zone decreases by about 50%, W increases slightly. Black-Right-Pointing-Pointer After 500 h and 1000 h of corrosion, weight losses are 0.272 mg/cm{sup 2} and 0.403 mg/cm{sup 2}. Black-Right-Pointing-Pointer With the increasing of corrosion time, the corrosion rate decreases significantly. - Abstract: CLAM steel is considered as a structural material to be used in the Test Blanket Module as a barrier or blanket adjacent to liquid LiPb in fusion reactors. In this paper, CLAM steel is welded by tungsten inert gas (TIG) welding, and the compatibility of the weldment with liquid LiPb is tested. Specimens were corroded in static liquid LiPb, with corrosion times of 500 h and 1000 h, at 550 Degree-Sign C, and the corresponding weight losses are 0.272 mg/cm{sup 2} and 0.403 mg/cm{sup 2} respectively. Also the corrosion rate decreases with increased corrosion time. In the as-welded condition, corrosion resistance of the weld zone is higher than that of the HAZ (Heat Affected Zone). Likely, thick martensite lath and large residual stresses at the welding zone result in higher corrosion rates. The compatibility of CLAM steel weld joints with high temperature liquid LiPb can be improved to some extent through a post-weld tempering process. The surface of the as-welded CLAM steel is uniformly corroded and the concentration of Cr on the surface decreases by about 50% after corrosion. Penetration of LiPb into the matrix is observed for neither the as-welded nor the as-tempered conditions. Influenced by thick martensite lath and large residual stresses, the welded area, especially the weld zone, is easily corroded, therefore it is of primary importance to protect the welded area in the solid blanket of the fusion reactor.

How life history influences the responses of the clam Scrobicularia plana to the combined impacts of carbamazepine and pH decrease

International Nuclear Information System (INIS)

Freitas, Rosa; Almeida, Ângela; Calisto, Vânia; Velez, Cátia; Moreira, Anthony; Schneider, Rudolf J.; Esteves, Valdemar I.; Wrona, Frederick J.; Soares, Amadeu M.V. M.; Figueira, Etelvina

2015-01-01

In the present study, the bivalve Scrobicularia plana, collected from two contrasting areas (pristine location and mercury contaminated area), was selected to assess the biochemical alterations imposed by pH decrease, carbamazepine (an antiepileptic) and the combined effect of both stressors. The effects on oxidative stress related biomarkers after 96 h exposure revealed that pH decrease and carbamazepine induced alterations on clams, with greater impacts on individuals from the contaminated area which presented higher mortality, higher lipid peroxidation and higher glutathione S-transferase activity. These results emphasize the risk of extrapolating results from one area to another, since the same species inhabiting different areas may be affected differently when exposed to the same stressors. Furthermore, the results obtained showed that, when combined, the impact of pH decrease and carbamazepine was lower than each stressor acting alone, which could be related to the defence mechanism of valves closure when bivalves are under higher stressful conditions. - Highlights: • Environmentally relevant concentrations of CBZ and pH 7.1 impacted the performance of Scrobicularia plana. • The combination of CBZ and pH 7.1 did not induce higher impacts compared with stressors acting alone. • Clams from a polluted area showed greater alterations than clams collected from an unpolluted area. - pH decrease and carbamazepine induced biochemical alterations on clams (Scrobicularia plana), with greater impacts on individuals from the contaminated area

Assessment of relationship between rainfall and Escherichia coli in clams (Chamelea gallina using the Bayes Factor

Directory of Open Access Journals (Sweden)

Cesare Ciccarelli

2017-08-01

Full Text Available Consumption of bivalve shellfish harvested from water contaminated with sewage pollution presents a risk of human infections and targeting control measures require a good understanding of environmental factors influencing the transport and the fate of faecal contaminants within the hydrological catchments. Although there has been extensive development of regression models, the point of this paper, focused on the relationship between rainfall events and concentrations of Escherichia coli monitored in clams, was the use of a Bayesian approach, by the Bayes Factor. The study was conducted on clams harvested from the south coast of Marche Region (Italy, a coastal area impacted by continuous treated effluents, intermittent rainfalldependent untreated sewage spillage - as a consequence of stormwater overflowing - and rivers with an ephemeral flow regime. The work compared the different interpretation criteria of Bayes Factor, confirmed that E. coli concentrations in clams from the studied area varied in correlation with rainfall events, and demonstrated the effectiveness of Bayes Factor in the assessment of shellfish quality in coastal marine waters. However, it suggested that further investigations would be warranted to determine which environmental factors provide the better basis for accurate and timely predictions. Furthermore the gathered data could be useful, to the local authorities of Marche Region, in the definition of flexible monitoring programmes, taking into account the atmospheric events that could affect the correct functioning of sewage managing systems and the flow of tributary rivers.

Risk-based approach to appraise valve closure in the clam Corbicula fluminea in response to waterborne metals

International Nuclear Information System (INIS)

Liao, C.-M.; Jou, L.-J.; Chen, B.-C.

2005-01-01

We developed a risk-based approach to assess how the valve closure behavior of Asiatic clam Corbicula fluminea responds to waterborne copper (Cu) and cadmium (Cd). We reanalyzed the valve closure response data from published literature to reconstruct the response time-dependent dose-response profiles based on an empirical three-parameter Hill equation model. We integrated probabilistic exposure profiles of measured environmental Cu and Cd concentrations in the western coastal areas of Taiwan with the reconstructed dose-response relationships at different integration times of response to quantitatively estimate the valve response risk. The risk assessment results implicate exposure to waterborne Cu and Cd may pose no significant risk to clam valve activity in the short-time response periods (e.g., <30 min), yet a relative high risk for valve closure response to waterborne Cu at response times greater than 120 min is alarming. We successfully linked reconstructed dose-response profiles and EC50-time relationships associated with the fitted daily valve opening/closing rhythm characterized by a three-parameter lognormal function to predict the time-varying bivalve closure rhythm response to waterborne metals. We parameterized the proposed predictive model that should encourage a risk-management framework for discussion of future design of biological monitoring systems. - A model was developed to link valve closure in clams to concentrations of metals in water

Characterisation of 12 microsatellite loci in the Vietnamese commercial clam Lutraria rhynchaena Jonas 1844 (Heterodonta: Bivalvia: Mactridae) through next-generation sequencing.

Science.gov (United States)

Thai, Binh Thanh; Tan, Mun Hua; Lee, Yin Peng; Gan, Han Ming; Tran, Trang Thi; Austin, Christopher M

2016-05-01

The marine clam Lutraria rhynchaena is gaining popularity as an aquaculture species in Asia. Lutraria populations are present in the wild throughout Vietnam and several stocks have been established and translocated for breeding and aquaculture grow-out purposes. In this study, we demonstrate the feasibility of utilising Illumina next-generation sequencing technology to streamline the identification and genotyping of microsatellite loci from this clam species. Based on an initial partial genome scan, 48 microsatellite markers with similar melting temperatures were identified and characterised. The 12 most suitable polymorphic loci were then genotyped using 51 individuals from a population in Quang Ninh Province, North Vietnam. Genetic variation was low (mean number of alleles per locus = 2.6; mean expected heterozygosity = 0.41). Two loci showed significant deviation from Hardy-Weinberg equilibrium (HWE) and the presence of null alleles, but there was no evidence of linkage disequilibrium among loci. Three additional populations were screened (n = 7-36) to test the geographic utility of the 12 loci, which revealed 100 % successful genotyping in two populations from central Vietnam (Nha Trang). However, a second population from north Vietnam (Co To) could not be successfully genotyped and morphological evidence and mitochondrial variation suggests that this population represents a cryptic species of Lutraria. Comparisons of the Qang Ninh and Nha Trang populations, excluding the 2 loci out of HWE, revealed statistically significant allelic variation at 4 loci. We reported the first microsatellite loci set for the marine clam Lutraria rhynchaena and demonstrated its potential in differentiating clam populations. Additionally, a cryptic species population of Lutraria rhynchaena was identified during initial loci development, underscoring the overlooked diversity of marine clam species in Vietnam and the need to genetically characterise population representatives prior

Hard coal; Steinkohle

Energy Technology Data Exchange (ETDEWEB)

Loo, Kai van de; Sitte, Andreas-Peter [Gesamtverband Steinkohle e.V., Herne (Germany)

2013-04-01

The year 2012 benefited from a growth of the consumption of hard coal at the national level as well as at the international level. Worldwide, the hard coal still is the number one energy source for power generation. This leads to an increasing demand for power plant coal. In this year, the conversion of hard coal into electricity also increases in this year. In contrast to this, the demand for coking coal as well as for coke of the steel industry is still declining depending on the market conditions. The enhanced utilization of coal for the domestic power generation is due to the reduction of the nuclear power from a relatively bad year for wind power as well as reduced import prices and low CO{sub 2} prices. Both justify a significant price advantage for coal in comparison to the utilisation of natural gas in power plants. This was mainly due to the price erosion of the inexpensive US coal which partly was replaced by the expansion of shale gas on the domestic market. As a result of this, the inexpensive US coal looked for an outlet for sales in Europe. The domestic hard coal has continued the process of adaptation and phase-out as scheduled. Two further hard coal mines were decommissioned in the year 2012. RAG Aktiengesellschaft (Herne, Federal Republic of Germany) running the hard coal mining in this country begins with the preparations for the activities after the time of mining.

Phytoplankton growth balanced by clam and zooplankton grazing and net transport into the low-salinity zone of the San Francisco Estuary

Science.gov (United States)

Kimmerer, Wim J.; Thompson, Janet K.

2014-01-01

We estimated the influence of planktonic and benthic grazing on phytoplankton in the strongly tidal, river-dominated northern San Francisco Estuary using data from an intensive study of the low salinity foodweb in 2006–2008 supplemented with long-term monitoring data. A drop in chlorophyll concentration in 1987 had previously been linked to grazing by the introduced clam Potamocorbula amurensis, but numerous changes in the estuary may be linked to the continued low chlorophyll. We asked whether phytoplankton continued to be suppressed by grazing and what proportion of the grazing was by benthic bivalves. A mass balance of phytoplankton biomass included estimates of primary production and grazing by microzooplankton, mesozooplankton, and clams. Grazing persistently exceeded net phytoplankton growth especially for larger cells, and grazing by microzooplankton often exceeded that by clams. A subsidy of phytoplankton from other regions roughly balanced the excess of grazing over growth. Thus, the influence of bivalve grazing on phytoplankton biomass can be understood only in the context of limits on phytoplankton growth, total grazing, and transport.

Ecotoxicological and Health Risk Assessment of Polycyclic Aromatic Hydrocarbons (PAHs) in Short-Neck Clam (Paphia undulata) and Contaminated Sediments in Malacca Strait, Malaysia.

Science.gov (United States)

Keshavarzifard, Mehrzad; Zakaria, Mohamad Pauzi; Sharifi, Reza

2017-10-01

The distribution, sources, and human health risk assessment of polycyclic aromatic hydrocarbons (PAHs) in surface sediment and the edible tissue of short-neck clam (Paphia undulata) from mudflat ecosystem in the west coast of Malaysia were investigated. The concentrations of ∑ 16 PAHs varied from 347.05 to 6207.5 and 179.32 to 1657.5 ng g -1 in sediment and short-neck clam samples, respectively. The calculations of mean PEL quotients (mean-PELQs) showed that the ecological risk of PAHs in the sediment samples was low to moderate-high level, whereas the total health risk through ingestion and dermal contact was considerably high. The PAHs biota sediment accumulation factors data for short-neck clam were obtained in this study, indicating a preferential accumulation of lower molecular weight PAHs. The source apportionment of PAHs in sediment using positive matrix factorization model indicated that the highest contribution to the PAHs was from diesel emissions (30.38%) followed by oil and oil derivate and incomplete coal combustion (23.06%), vehicular emissions (16.43%), wood combustion (15.93%), and natural gas combustion (14.2%). A preliminary evaluation of human health risk using chronic daily intake, hazard index, benzo[a]pyrene-equivalent (BaP eq ) concentration, and the incremental lifetime cancer risk indicated that PAHs in short-neck clam would induce potential carcinogenic effects in the consumers.

Fishery of the short-necked clam Paphia undulata in Southern Negros Occidental, Central Philippines

Directory of Open Access Journals (Sweden)

Karen A. Villarta

2010-06-01

Full Text Available This study documents the fishery of the short-necked clam Paphia undulata in coastal waters of southern Negros Occidental. Catch and effort estimates were determined based on daily records of compressor divers gathered between February-July 2008 in Himamaylan City and July 2008-May 2009 in the town of Hinigaran. Fishing and marketing practices in both areas were also documented and population biology information noted.Compared to earlier conditions, present fishing patterns show a worsened stage of overexploitation primarily characterized by collection of predominantly small and immature (mostly <45 mm shell lengths sizes. Intensity/duration and location of fishing also varied due to both abundance and demand factors.The difference in sizes of clams and the varying fishing durations in each area suggest a non-uniform pattern of settlement resulting most likely from differential larval recruitment, the likely factors causing the local boom and bust fishery. The larger and long term extent of the effect of these factors can only be further investigated by parallel 2-3 year fishery-dependent and -independent surveys

Microstructure and mechanical properties of the TIG welded joints of fusion CLAM steel

Energy Technology Data Exchange (ETDEWEB)

Jiang Zhizhong, E-mail: zhizhongjiang2006@yahoo.com.c [School of Materials Science and Engineering, University of Science and Technology Beijing, Xueyuan Road, Beijing 100083 (China); Ren Litian; Huang Jihua; Ju Xin; Wu Huibin [School of Materials Science and Engineering, University of Science and Technology Beijing, Xueyuan Road, Beijing 100083 (China); Huang Qunying; Wu Yican [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui 230031 (China)

2010-12-15

The CLAM steel plates were butt-welded through manual tungsten inert gas welding (TIG) process, and the following post-welding heat treatment (PWHT) at 740 {sup o}C for 1 h. The microstructure and mechanical properties of the welded joints were measured. The results show that both hardening and softening occur in the weld joints before PWHT, but the hardening is not removed completely in the weld metal and the fusion zone after PWHT. In as-welded condition, the microstructure of the weld metal is coarse lath martensite, and softened zone in heat-affected zone (HAZ) consists of a mixture of tempered martensite and ferrite. After PWHT, a lot of carbides precipitate at all zones in weld joints. The microstructure of softened zone transforms to tempered sorbite. Tensile strength of the weld metal is higher than that of HAZ and base metal regardless of PWHT. However, the weld metal has poor toughness without PWHT. The impact energy of the weld metal after PWHT reaches almost the same level as the base metal. So it is concluded that microstructure and mechanical properties of the CLAM steel welded joints can be improved by a reasonable PWHT.

Population dynamics of the freshwater clam Galatea paradoxa from the Volta River, Ghana

Directory of Open Access Journals (Sweden)

Adjei-Boateng D.

2012-07-01

Full Text Available Population parameters such as asymptotic (L∞, growth coefficient (K, mortality rates (Z,F and M, exploitation level (E and recruitment pattern of the freshwater clam Galatea paradoxa were estimated using length-frequency data from the Volta River estuary, Ghana. The L∞ for G. paradoxa at the Volta estuary was 105.7 mm, the growth coefficient (K and the growth performance index (Ǿ ranged between 0.14–0.18 year-1 and 3.108–3.192, respectively. Total mortality (Z was 0.65–0.82 year-1, while natural mortality (M and fishing mortality (F were 0.35–0.44 year-1 and 0.21–0.47 year-1, respectively, with an exploitation level of 0.32–0.57. The recruitment pattern suggested that G. paradoxa has year-round recruitment with a single pulse over an extended period (October–March in the Volta River. The Volta River stock of G. paradoxa is overfished and requires immediate action to conserve it. This can be achieved by implementing a minimum landing size restriction and intensifying the culture of smaller clams which is a traditional activity at the estuary.

Initiative hard coal; Initiative Steinkohle

Energy Technology Data Exchange (ETDEWEB)

Leonhardt, J.

2007-08-02

In order to decrease the import dependence of hard coal in the European Union, the author has submitted suggestions to the director of conventional sources of energy (directorate general for energy and transport) of the European community, which found a positive resonance. These suggestions are summarized in an elaboration 'Initiative Hard Coal'. After clarifying the starting situation and defining the target the presupposition for a better use of hard coal deposits as raw material in the European Union are pointed out. On that basis concrete suggestions for measures are made. Apart from the conditions of the deposits it concerns thereby also new mining techniques and mining-economical developments, connected with tasks for the mining-machine industry. (orig.)

Physiological responses to copper in giant clams: a comparison of two methods in revealing effects on photosynthesis in zooxanthellae.

Science.gov (United States)

Elfwing, Tina; Blidberg, Eva; Tedengren, Michael

2002-08-01

In the present work physiological responses to a short term, sub-lethal exposure to copper (5 microg Cu2 l(-1) were studied on two species of giant clams, Tridacna gigas and Hippopus hippopus. All giant clams (fam. Tridacnidae) maintain a symbiotic relationship with photo-synthesising microalgae (zooxanthellae) and the phytotoxic effects of this copper concentration were approached with two different end points: changes in oxygen production and maximal quantum yield (Fv/Fm). Additionally we measured respiration, whereby Pg:R ratios could be calculated for the system (algae and clam) and used as an indicator of stress. Cu accumulation was only determined for T. gigas and showed significantly higher tissue concentrations in exposed specimens (11.3 microg Cu g(-1) dry wt) compared to the controls (4.2 microg Cu g(-1)). Both species displayed significantly reduced Pg:R ratios due to exposure, mainly explained by lowered gross production. No indication of stress was shown in the fluorescence measurements and possible explanations are discussed in the paper. We propose that inhibitions in the slow kinetics of photosynthesis were not captured by this fluorescence parameter. Accordingly we suggest that measurements of maximum fluorescence yield should be accompanied by complementary parameters when studying pollutants with unclear phytotoxic mechanisms.

Metabolic physiology of the invasive clam, Potamocorbula amurensis: the interactive role of temperature, salinity, and food availability.

Science.gov (United States)

Miller, Nathan A; Chen, Xi; Stillman, Jonathon H

2014-01-01

In biological systems energy serves as the ultimate commodity, often determining species distributions, abundances, and interactions including the potential impact of invasive species on native communities. The Asian clam Potamocorbula amurensis invaded the San Francisco Estuary (SFE) in 1986 and is implicated in the decline of native fish species through resource competition. Using a combined laboratory/field study we examined how energy expenditure in this clam is influenced by salinity, temperature and food availability. Measures of metabolism were made at whole organism (metabolic rate) and biochemical (pyruvate kinase (PK) and citrate synthase (CS) enzyme activities) levels. We found in the field, over the course of a year, the ratio of PK to CS was typically 1.0 suggesting that aerobic and fermentative metabolism were roughly equivalent, except for particular periods characterized by low salinity, higher temperatures, and intermediate food availabilities. In a 30-day laboratory acclimation experiment, however, neither metabolic rate nor PK:CS ratio was consistently influenced by the same variables, though the potential for fermentative pathways did predominate. We conclude that in field collected animals, the addition of biochemical measures of energetic state provide little additional information to the previously measured whole organism metabolic rate. In addition, much of the variation in the laboratory remained unexplained and additional variables, including reproductive stage or body condition may influence laboratory-based results. Further study of adult clams must consider the role of organismal condition, especially reproductive state, in comparisons of laboratory experiments and field observations.

Size dependent bioaccumulation and ecotoxicity of gold nanoparticles in an endobenthic invertebrate: The Tellinid clam Scrobicularia plana

International Nuclear Information System (INIS)

Pan Jinfen; Buffet, Pierre-Emmanuel; Poirier, Laurence; Amiard-Triquet, Claude; Gilliland, Douglas; Joubert, Yolaine; Pilet, Paul; Guibbolini, Marielle; Risso de Faverney, Christine; Roméo, Michèle; Valsami-Jones, Eugenia; Mouneyrac, Catherine

2012-01-01

Gold nanoparticles (AuNPs) have important technological applications resulting in an increased potential for release to the environment, and a greater possibility of toxicological effects. The marine bivalve Scrobicularia plana was exposed to AuNPs of size 5, 15 and 40 nm during a 16 d laboratory exposure at 100 μg Au L −1 . After exposure to AuNPs forming aggregates (>700 nm), the clams accumulated Au in their soft tissues. Biochemical (biomarkers) and behavioral (burrowing and feeding) responses were investigated. Au NPs were responsible of metallothionein induction (5, 40 nm), increased activities of catalase (15, 40 nm) and superoxide dismutase (40 nm) and of glutathione S-transferase by the three sizes of AuNPs indicating defense against oxidative stress. Exposure to AuNPs impaired burrowing behavior. However, it must be underlined that these effects were observed at a dose much higher than expected in the environment. - Highlights: ► AuNPs were aggregated to a maximum distribution peak at 0.6 μm in seawater. ► Scrobicularia plana accumulated Au with higher accumulation for bigger NPs. ► Induction of MT, CAT, SOD and GST showed oxidative stress in clams. ► TBARS levels advocated no significant oxidative damage in clams. ► Gold is an inert metal, ecotoxic effects are probably due to the nanoparticle form. - AuNPs were aggregated in seawater, Scrobicularia plana accumulated Au with higher accumulation for bigger NPs and increased activities of biomarkers showed oxidative stress.

Developmental Transcriptome Analysis and Identification of Genes Involved in Larval Metamorphosis of the Razor Clam, Sinonovacula constricta.

Science.gov (United States)

Niu, Donghong; Wang, Fei; Xie, Shumei; Sun, Fanyue; Wang, Ze; Peng, Maoxiao; Li, Jiale

2016-04-01

The razor clam Sinonovacula constricta is an important commercial species. The deficiency of developmental transcriptomic data is becoming the bottleneck of further researches on the mechanisms underlying settlement and metamorphosis in early development. In this study, de novo transcriptome sequencing was performed for S. constricta at different early developmental stages by using Illumina HiSeq 2000 paired-end (PE) sequencing technology. A total of 112,209,077 PE clean reads were generated. De novo assembly generated 249,795 contigs with an average length of 585 bp. Gene annotation resulted in the identification of 22,870 unigene hits against the NCBI database. Eight unique sequences related to metamorphosis were identified and analyzed using real-time PCR. The razor clam reference transcriptome would provide useful information on early developmental and metamorphosis mechanisms and could be used in the genetic breeding of shellfish.

Haemocytic leukemia in Prince Edward Island (PEI) soft shell clam (Mya arenaria): Spatial distribution in agriculturally impacted estuaries

International Nuclear Information System (INIS)

Muttray, Annette; Reinisch, Carol; Miller, Jason; Ernst, William; Gillis, Patricia; Losier, Melanie; Sherry, James

2012-01-01

Intensive farming of potatoes in Prince Edward Island (PEI) relies on the repeated and widespread application of fertilizers and pesticides. In PEI the main potato farming areas are in close proximity and drain directly to estuaries. Runoff from high agricultural activity watersheds could impact benthic organism health in the depositional zone of downstream estuaries. The estuarine filter feeder Mya arenaria (soft-shell clam) could be particularly vulnerable to both particle-adsorbed and water soluble contaminants. M. arenaria is susceptible to haemocytic leukemia. In May 2009, we established that heavily proliferated leukemia (HPL) prevalence was generally higher in PEI estuaries located downstream of high intensity potato farming (Dunk and Wilmot estuaries) watersheds than in estuaries downstream of lower intensity areas. Using Mab-1E10 based immunocytochemistry we observed that leukemic haemocytes from the Dunk and Wilmot estuaries were 1E10 negative whereas those from the Ox/Sheep estuary (low potato farming intensity) were 1E10 positive. The expression of genes in the p53 tumour suppressor pathway enabled us to differentiate groups of leukemic and normal M. arenaria, validating our diagnoses. In October 2009, we confirmed that HPL prevalence was elevated in the Dunk and Wilmot estuaries compared to reference (Souris River). Moreover, leukemia prevalence declined with distance from the river mouths along transects through the Dunk and Wilmot estuaries. The pesticides ß-endosulfan and α-endosulfan were detected in surface sediments from the Dunk and Wilmot estuaries, but not in sediments from either the Souris River or several other lower intensity potato farming watersheds. Our study provides evidence of an association between intensity of potato farming and prevalence of clam leukemia at downstream estuaries in PEI. - Highlights: ► We examined leukemia prevalence in PEI clams Mya arenaria. ► Prevalence was generally higher downstream of high intensity

Radio-resistance of some bacterial pathogens in soft-shell clams (Mya arenaria) and mussels (Mytilus edulis)

International Nuclear Information System (INIS)

Licciardello, J.J.; D'Entremont, D.L.; Lundstrom, R.C.

1989-01-01

Gamma-irradiation decimal reduction doses were determined for E. coli, Salmonella typhimurium, Shigella flexneri, Strept. faecalis, Staph, aureus, and the Total Plate Count in a soft-shell clam or mussel substrate. Factors to be considered for designing and irradiation bacterial-decontamination process for shellfish are discussed

Soft skills, hard skills, and individual innovativeness

DEFF Research Database (Denmark)

Hendarman, Achmad Fajar; Cantner, Uwe

2018-01-01

of Indonesian firms from different industries are used from an online survey on manager and worker perceptions related to individual innovation performance on the one hand and individual skills on the other hand. The results show that soft skills and hard skills are significantly and positively associated...... with individual level innovativeness. However, no complementarity (positive interaction effect) is found between soft skills and hard skills....

Overview on the welding technologies of CLAM steel and the DFLL TBM fabrication

Directory of Open Access Journals (Sweden)

Junyu Zhang

2016-12-01

Full Text Available Dual Functional Lithium Lead (DFLL blanket was proposed for its advantages of high energy exchange efficiency and on-line tritium extraction, and it was selected as the candidate test blanket module (TBM for China Fusion Engineering Test Reactor (CFETR and the blanket for Fusion Design Study (FDS series fusion reactors. Considering the influence of high energy fusion neutron irradiation and high heat flux thermal load on the blanket, China Low Activation Martensitic (CLAM steel was selected as the structural material for DFLL blanket. The structure of the blanket and the cooling internal components were pretty complicated. Meanwhile, high precision and reliability were required in the blanket fabrication. Therefore, several welding techniques, such as hot isostatic pressing diffusion bonding, tungsten inner gas welding, electron beam welding and laser beam welding were developed for the fabrication of cooling internals and the assembly of the blanket. In this work, the weldability on CLAM steel by different welding methods and the properties of as-welded and post-weld heat-treated joints were investigated. Meanwhile, the welding schemes and the assembly strategy for TBM fabrication were raised. Many tests and research efforts on scheme feasibility, process standardization, component qualification and blanket assembly were reviewed.

Establishing the norm of Cognitive Adaptive Test/Clinical Linguistic and Auditory Milestone Scale (CAT/CLAMS) in Chinese infants.

Science.gov (United States)

Chang, Y C; Huang, C C; Hu, S C

1998-01-01

The Cognitive Adaptive Test/Clinical Linguistic and Auditory Milestone Scale (CAT/CLAMS) has been recommended as a useful diagnostic tool for cognitive delay. To provide wider application of this instrument as a general screening tool for pediatricians, a normative percentile graph from a large convenience sample of Chinese infants has been established. The effects of environmental factors on early language and adaptive development were also analyzed. A total of 402 normal infants aged 4 to 36 months attending well-child clinics were recruited. These infants were from all socioeconomic strata, and half were bilingual with Mandarin and Taiwanese. Grandmothers were the chief caretakers or co-caretakers in 28% of this population. The milestones were attained in a sequential and orderly fashion. In contrast to the adaptive ability, there was a wide variation in language acquisition between age 12 and 24 months. Multiple stepwise regression of demographic and environmental factors revealed that age was the main variance in CAT score (P = 0.0001). In CLAMS score, however, age and caretakers were the significant predictors (P = 0.0001). Infants cared for by both mothers and grandmothers had higher CLAMS score by two months over those cared by mothers only (P = 0.001). Those cared for by grandmothers only had lower language score than those by mothers only, though without statistical significance (P = 0.05). Bilingualism, birth order, numbers of siblings, familial structures, and parental socioeconomic status had no effect on early development.

Rad-hard embedded computers for nuclear robotics

International Nuclear Information System (INIS)

Giraud, A.; Joffre, F.; Marceau, M.; Robiolle, M.; Brunet, J.P.; Mijuin, D.

1994-01-01

Nuclear industries require robots with embedded rad hard electronics and high reliability. The SYROCO research program allowed to perform efficient industrial prototypes, build according to MICADO architecture, and to design CADMOS architecture. MICADO architecture uses the auto healing property that have CMOS circuits when being switched off during irradiation. (D.L.). 8 refs., 5 figs

Synthesis, Structure, and Properties of Refractory Hard-Metal Borides

Science.gov (United States)

Lech, Andrew Thomas

As the limits of what can be achieved with conventional hard compounds, such as tungsten carbide, are nearing reach, super-hard materials are an area of increasing industrial interest. The refractory hard metal borides, such as ReB2 and WB4, offer an increasingly attractive alternative to diamond and cubic boron nitride as a next-generation tool material. In this Thesis, a thorough discussion is made of the progress achieved by our laboratory towards understanding the synthesis, structure, and properties of these extremely hard compounds. Particular emphasis is placed on structural manipulation, solid solution formation, and the unique crystallographic manifestations of what might also be called "super-hard metals".

Freshwater Clam Extract Ameliorates Triglyceride and Cholesterol Metabolism through the Expression of Genes Involved in Hepatic Lipogenesis and Cholesterol Degradation in Rats

Directory of Open Access Journals (Sweden)

Thomas Laurent

2013-01-01

Full Text Available The freshwater clam (Corbicula spp. is a popular edible bivalve and has been used as a folk remedy for liver disease in Asia. As a Chinese traditional medicine, it is said that freshwater clam ameliorates alcoholic intoxication and cholestasis. In this study, to estimate the practical benefit of freshwater clam extract (FCE, we compared the effects of FCE and soy protein isolate (SPI on triglyceride and cholesterol metabolism in rats. FCE and SPI lowered serum cholesterol, and FCE tended to reduce serum triglycerides. FCE enhanced fecal sterol excretion and hepatic mRNA levels of CYP7A1 and ABCG5 more substantially than SPI; however, both diets reduced hepatic cholesterol. Both of the diets similarly suppressed liver lipids improved Δ9-desaturated fatty acid profile, and FCE was associated with a reduction in FAS and SCD1 mRNA levels. Hepatic transcriptome analysis revealed that inhibition of lipogenesis-related gene expression may contribute to downregulation of hepatic triglycerides by FCE. FCE would have better potential benefits for preventing metabolic disorders, through greater improvement of metabolism of triglycerides and cholesterol, likely through a mechanism similar to SPI.

Addressing Sustainability of Clam Farming in the Venice Lagoon

Directory of Open Access Journals (Sweden)

Donata Melaku Canu

2011-09-01

According to the System Approach Framework (SAF, based on previous studies and stakeholder interactions, we developed a model integrating ecological, social, and economic (ESE aspects. We chose the aspects necessary to represent the essential dynamics of major ecological, social, and economic clam farming system components to project the consequences of implementing alternative management policies and to address the ecological and social carrying capacity. Results of the simulations suggest that a properly managed farming system can sustain an acceptable income and support the local community, while reducing negative environmental impacts, social conflicts, and consumer health risks and improving system resilience. The results highlight the importance of an interdisciplinary, participatory, and adaptive approach in planning the management of this important renewable resource.

Species Profiles: Life Histories and Environmental Requirements of Coastal Fishes and Invertebrates (Pacific Southwest). Common Littleneck Clam.

Science.gov (United States)

1986-04-01

cells in clam (P. tenerrima) in having December and January (Quayle 1943). w , , radiating ribs more prominent than The growth of gametes reaches a...reproductive cycle levels in intertidal mollusks of of Protothaca stamine ’ using histo- California. Veliger 14(4):365-372. logical, wet weight-dry

Hardness and adhesion performances of nanocoating on carbon steel

Science.gov (United States)

Hasnidawani, J. N.; Azlina, H. N.; Norita, H.; Bonnia, N. N.

2018-01-01

Nanocoatings industry has been aggressive in searching for cost-effective alternatives and environmental friendly approaches to manufacture products. Nanocoatings represent an engineering solution to prevent corrosion of the structural parts of ships, insulation and pipelines industries. The adhesion and hardness properties of coating affect material properties. This paper reviews ZnO-SiO2 as nanopowder in nano coating formulation as the agent for new and improved coating performances. Carbon steel on type S50C used as common substrate in nanocoating industry. 3wt% ZnO and 2wt% SiO2 addition of nanoparticles into nanocoating showed the best formulation since hardness and adhesion of nanocoating was good on carbon steel substrate. Incorporation of nanoparticles into coating increased the performances of coating.

Excavation Technology for Hard Rock - Problems and Prospects

International Nuclear Information System (INIS)

Gillani, S.T.A.; Butt, N.

2009-01-01

Civil engineering projects have greatly benefited from the mechanical excavation of hard rock technology. Mining industry, on the other hand, is still searching for major breakthroughs to mechanize and then automate the winning of ore and drivage of access tunnels in its metalliferous sector. The aim of this study is to extend the scope of drag bits for road headers in hard rock cutting. Various factors that can impose limitations on the potential applications of drag bits in hard rock mining are investigated and discussed along with alternative technology options. (author)

Comparison of two methods for the detection of hepatitis A virus in clam samples (Tapes spp.) by reverse transcription-nested PCR.

Science.gov (United States)

Suñén, Ester; Casas, Nerea; Moreno, Belén; Zigorraga, Carmen

2004-03-01

The detection of hepatitis A virus in shellfish by reverse transcription-nested polymerase chain reaction (RT-nested PCR) is hampered mainly by low levels of virus contamination and PCR inhibitors in shellfish. In this study, we focused on getting a rapid and sensitive processing procedure for the detection of HAV by RT-nested PCR in clam samples (Tapes spp.). Two previously developed processing methods for virus concentration in shellfish have been improved upon and compared. The first method involves acid adsorption, elution, polyethylene glycol (PEG) precipitation, chloroform extraction and PEG precipitation. The second method is based on elution with a glycine buffer at pH 10, chloroform extraction and concentration by ultracentrifugation. Final clam concentrates were processed by RNA extraction or immunomagnetic capture of viruses (IMC) before the RT-nested PCR reaction. Both methods of sample processing combined with the RNA extraction from the concentrates were very efficient when they were assayed in seeded and naturally contaminated samples. The results show that the first method was more effective in removal inhibitors and the second was simpler and faster. The IMC of HAV from clam concentrates processed by method 1 was revealed to be a very effective method of simultaneously removing residual PCR inhibitors and of concentrating the virus.

Haemocytic leukemia in Prince Edward Island (PEI) soft shell clam (Mya arenaria): Spatial distribution in agriculturally impacted estuaries

Energy Technology Data Exchange (ETDEWEB)

Muttray, Annette, E-mail: amuttray@rescan.com [Environment Canada, Water Science and Technology Directorate, 867 Lakeshore Road, Burlington, ON, Canada L7R 4A6 (Canada); Reinisch, Carol, E-mail: creinisch@mbl.edu [Visiting Scientist Environment Canada, Water Science and Technology Directorate, 867 Lakeshore Road, Burlington, ON, Canada L7R 4A6 (Canada); Miller, Jason, E-mail: j.miller@ec.gc.ca [Environment Canada, Water Science and Technology Directorate, 867 Lakeshore Road, Burlington, ON, Canada L7R 4A6 (Canada); Ernst, William, E-mail: bill.ernst@ec.gc.ca [Environment Canada, Water Science and Technology Directorate, 45 Alderney Drive, Dartmouth, NS, Canada B2Y 2N6 (Canada); Gillis, Patricia, E-mail: patty.gillis@ec.gc.ca [Environment Canada, Water Science and Technology Directorate, 867 Lakeshore Road, Burlington, ON, Canada L7R 4A6 (Canada); Losier, Melanie, E-mail: melanie.losier@ec.gc.ca [Environment Canada, Atlantic Laboratory for Environmental Testing, Environmental Science Centre, P.O. Box 23005 Moncton, NB, Canada E1A 6S8 (Canada); Sherry, James, E-mail: jim.sherry@ec.gc.ca [Environment Canada, Water Science and Technology Directorate, 867 Lakeshore Road, Burlington, ON, Canada L7R 4A6 (Canada)

2012-05-01

Intensive farming of potatoes in Prince Edward Island (PEI) relies on the repeated and widespread application of fertilizers and pesticides. In PEI the main potato farming areas are in close proximity and drain directly to estuaries. Runoff from high agricultural activity watersheds could impact benthic organism health in the depositional zone of downstream estuaries. The estuarine filter feeder Mya arenaria (soft-shell clam) could be particularly vulnerable to both particle-adsorbed and water soluble contaminants. M. arenaria is susceptible to haemocytic leukemia. In May 2009, we established that heavily proliferated leukemia (HPL) prevalence was generally higher in PEI estuaries located downstream of high intensity potato farming (Dunk and Wilmot estuaries) watersheds than in estuaries downstream of lower intensity areas. Using Mab-1E10 based immunocytochemistry we observed that leukemic haemocytes from the Dunk and Wilmot estuaries were 1E10 negative whereas those from the Ox/Sheep estuary (low potato farming intensity) were 1E10 positive. The expression of genes in the p53 tumour suppressor pathway enabled us to differentiate groups of leukemic and normal M. arenaria, validating our diagnoses. In October 2009, we confirmed that HPL prevalence was elevated in the Dunk and Wilmot estuaries compared to reference (Souris River). Moreover, leukemia prevalence declined with distance from the river mouths along transects through the Dunk and Wilmot estuaries. The pesticides ss-endosulfan and {alpha}-endosulfan were detected in surface sediments from the Dunk and Wilmot estuaries, but not in sediments from either the Souris River or several other lower intensity potato farming watersheds. Our study provides evidence of an association between intensity of potato farming and prevalence of clam leukemia at downstream estuaries in PEI. - Highlights: Black-Right-Pointing-Pointer We examined leukemia prevalence in PEI clams Mya arenaria. Black

Antimicrobial resistance and detection of the mecA gene besides enterotoxin-encoding genes among coagulase-negative Staphylococci isolated from clam meat of Anomalocardia brasiliana.

Science.gov (United States)

Batista, Jacqueline Ellen Camelo; Ferreira, Ewerton Lucena; Nascimento, Danielle Cristina de Oliveira; Ventura, Roberta Ferreira; de Oliveira, Wagner Luis Mendes; Leal, Nilma Cintra; Lima-Filho, José Vitor

2013-12-01

The marine clam Anomalocardia brasiliana is a candidate as a sentinel animal to monitor the contamination levels of coliforms in shellfish-harvesting areas of Brazil's northeastern region. The aim of the present study was to search enterotoxin-encoding genes plus the mecA gene among coagulase-negative staphylococci (CNS) isolates from shellfish meats of A. brasiliana. The specimen clam (n=48; 40 clams per sample) was collected during low tide in the bay area of Mangue Seco from April through June 2009, and random samples of chilled and frozen shelled clam meat (n=33; 250 g per sample) were obtained from retail shops from January through March 2012. Seventy-nine CNS isolates were identified, including Staphylococcus xylosus, S. cohnii spp. urealyticus, S. sciuri, and S. lentus. A high percentage of isolates resistant to erythromycin (58.5%), penicillin (51.2%), and tetracycline (43.9%), and the fluoroquinolones levofloxacin (39%) and ciprofloxacin (34.1%) were recorded from those environmental samples. Isolates from retail shops were particularly resistant to oxacillin (55.3%) and penicillin (36.8%). All CNS resistant to oxacillin and/or cefoxitin were positive for the presence of the mecA gene, but phenotypically susceptible to vancomycin. Also, the enterotoxin-encoding genes seg and seh were detected through multiplex-polymerase chain reaction in 77.7% and 88.8% of the isolates from environmental samples, versus 90.5% and 100% of the isolates from retail shops, respectively. The data reveal the risk to public health due to consuming raw or undercooked shellfish containing enterotoxigenic plus methicillin-resistant CNS.

Correlation between Fe–V–C alloys surface hardness and plasma temperature via LIBS technique

Energy Technology Data Exchange (ETDEWEB)

Messaoud Aberkane, S., E-mail: smessaoud@cdta.dz [Centre de Développement des Technologies Avancées, Baba Hassen, Alger (Algeria); Bendib, A. [Université des Sciences et de Technologie Houari Boumediene, Bab-Ezzouar, Alger (Algeria); Yahiaoui, K.; Boudjemai, S.; Abdelli-Messaci, S.; Kerdja, T. [Centre de Développement des Technologies Avancées, Baba Hassen, Alger (Algeria); Amara, S.E. [Université des Sciences et de Technologie Houari Boumediene, Bab-Ezzouar, Alger (Algeria); Harith, M.A. [National Institute of Laser Enhanced Science, Cairo University (Egypt)

2014-05-01

Highlights: • New application of LIBS in industry. • Hardness of metallic alloys estimation using LIBS calibration curves. • Linear correlation between the plasma temperature and the hardness of metallic alloys. • The shock wave is fast when the material is hard. - Abstract: Surface hardness is a very important characteristic of metals. Its monitoring plays a key role in industry. In the present paper, using laser induced breakdown spectroscopy (LIBS), Fe–V{sub 18%}–C{sub 1%} alloys with different heat treatments have been used for making the correlation between surface hardness and laser-induced plasma temperatures. All investigated samples were characterized by the same ferrite phase with different Vickers surface hardnesses. The differences in hardness values were attributed to the crystallite size changes. A linear relationship has been obtained between the Vickers surface hardness and the laser induced plasma temperature. For comparison the relation between surface hardness and the ratio of the vanadium ionic to atomic spectral lines intensities (VII/VI) provided good linear results too. However, adopting the proposed approach of using the plasma temperature, instead, is more reliable in view of the difficulties that could be encountered in choosing the proper ionic and atomic spectral lines. To validate this approach we have investigated the shock wave speed induced by laser interaction with the used samples. It was found that harder is the material faster is the shock wave. The determination of the surface hardness via measuring T{sub e} shows the feasibility of using LIBS as an easy and reliable method for in situ industrial application for production control.

Work Hard / Play Hard

OpenAIRE

Burrows, J.; Johnson, V.; Henckel, D.

2016-01-01

Work Hard / Play Hard was a participatory performance/workshop or CPD experience hosted by interdisciplinary arts atelier WeAreCodeX, in association with AntiUniversity.org. As a socially/economically engaged arts practice, Work Hard / Play Hard challenged employees/players to get playful, or go to work. 'The game changes you, you never change the game'. Employee PLAYER A 'The faster the better.' Employer PLAYER B

Improvement of hardness of aluminium AA1200 by laser surface alloying

CSIR Research Space (South Africa)

Mabhali, Luyolo AB

2010-07-01

Full Text Available Aluminium is vastly used in industry due to its low cost, light weight and excellent workability, but lacks in wear resistance and hardness. Laser alloying is used to improve the surface properties such as hardness by modifying the composition...

Magnetic characterization of soft and hard magnetic materials

International Nuclear Information System (INIS)

Groessinger, R.; Mehmood, N.; Sato Turtelli, R.; Keplinger, F.

2008-01-01

Full text: For industrial applications many materials are used which are magnetic such as various kind of steels, but also soft respectively hard magnetic materials are applied in order to solve a certain technical problem. For this purpose the magnetic properties of these materials have to be known or even optimized. In solid state physics the magnetic characterization is often performed at low temperatures, which means from 4.2 K up to room temperature. Contrary, for industrial application the range of environmental temperatures (-20 o C - 120 o C) where such systems are used is of interest. Additionally ranges the shape and size between few mm up to several cm. It is the purpose of this paper to summarize measuring systems which are mainly suited for an industrial characterizations. The most important hysteresis measurement methods which are applicable for industrial purpose are summarized. Special emphasis is laid on the difference between soft or hard magnetic materials. Practical examples for each method are given. Additionally a strain gauge method which is useful for magnetostriction measurement is shown. (author)

Legal and Institutional Constraints on Aquaculture in Dredged Material Containment Areas

Science.gov (United States)

1993-04-01

SIZED CLAM PERMIT: It is unlawful to take, harvest, possess, sell, purchase, or import any hard clam of the genus Mercenaria of less than one inch in...S.W.2d 212, 216 (Tex.App. 19b?’ Bily v. Omni Equities . Inc., 731 S.W.2d 606, 611-12 (Tex.App. 1987); see also Tex. [Civ. Prac. & Rem.] Code Ann

Biodepuration of polynuclear aromatic hydrocarbons from a bivalve mollusc, Mercenaria mercenaria L

International Nuclear Information System (INIS)

Tanacredl, J.T.; Cardenas, R.R.

1991-01-01

Mercenaria mercenaria, exposed in vitro for 48 h to nine parent polynuclear aromatic hydrocarbons (PAHs) found in waste crankcase oil (WCCO) and analyzed by multiparametric analysis over a 45-day depuration period in an activated carbon filtration aquaria system, did not depurate PAHs, but rather maintained them at detectable levels. Uptake of PAHs was shown to be directly related to clam weight. A cluster analysis of empirical results reaffirmed a biostabilization in PAH groupings in clam tissue over a 45-day depuration period and exhibited no evidence of a decreasing trend in total PAHs when subjected to ANOVA. Due to the commercial importance of hard-shell clams, the practices of clam depuration and clam relaying are reviewed in light of potential long-terms public health exposures to low-level xenobiotics and the implications for human consumers

The Whole-Genome and Transcriptome of the Manila Clam (Ruditapes philippinarum).

Science.gov (United States)

Mun, Seyoung; Kim, Yun-Ji; Markkandan, Kesavan; Shin, Wonseok; Oh, Sumin; Woo, Jiyoung; Yoo, Jongsu; An, Hyesuck; Han, Kyudong

2017-06-01

The manila clam, Ruditapes philippinarum, is an important bivalve species in worldwide aquaculture including Korea. The aquaculture production of R. philippinarum is under threat from diverse environmental factors including viruses, microorganisms, parasites, and water conditions with subsequently declining production. In spite of its importance as a marine resource, the reference genome of R. philippinarum for comprehensive genetic studies is largely unexplored. Here, we report the de novo whole-genome and transcriptome assembly of R. philippinarum across three different tissues (foot, gill, and adductor muscle), and provide the basic data for advanced studies in selective breeding and disease control in order to obtain successful aquaculture systems. An approximately 2.56 Gb high quality whole-genome was assembled with various library construction methods. A total of 108,034 protein coding gene models were predicted and repetitive elements including simple sequence repeats and noncoding RNAs were identified to further understanding of the genetic background of R. philippinarum for genomics-assisted breeding. Comparative analysis with the bivalve marine invertebrates uncover that the gene family related to complement C1q was enriched. Furthermore, we performed transcriptome analysis with three different tissues in order to support genome annotation and then identified 41,275 transcripts which were annotated. The R. philippinarum genome resource will markedly advance a wide range of potential genetic studies, a reference genome for comparative analysis of bivalve species and unraveling mechanisms of biological processes in molluscs. We believe that the R. philippinarum genome will serve as an initial platform for breeding better-quality clams using a genomic approach. © The Author 2017. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution.

Adsorption of gold ions from industrial wastewater using activated carbon derived from hard shell of apricot stones - an agricultural waste.

Science.gov (United States)

Soleimani, Mansooreh; Kaghazchi, Tahereh

2008-09-01

In this study, hard shell of apricot stones was selected from agricultural solid wastes to prepare effective and low cost adsorbent for the gold separation from gold-plating wastewater. Different adsorption parameters like adsorbent dose, particle size of activated carbon, pH and agitation speed of mixing on the gold adsorption were studied. The results showed that under the optimum operating conditions, more than 98% of gold was adsorbed onto activated carbon after only 3h. The equilibrium adsorption data were well described by the Freundlich and Langmuir isotherms. Isotherms have been used to obtain thermodynamic parameters. Gold desorption studies were performed with aqueous solution mixture of sodium hydroxide and organic solvents at ambient temperatures. Quantitative recovery of gold ions is possible by this method. As hard shell of apricot stones is a discarded as waste from agricultural and food industries, the prepared activated carbon is expected to be an economical product for gold ion recovery from wastewater.

Growth, Survival and Reproduction of the Giant Clam Tridacna maxima (Röding 1798, Bivalvia) in Two Contrasting Lagoons in French Polynesia

Science.gov (United States)

Van Wynsberge, Simon; Andréfouët, Serge; Gaertner-Mazouni, Nabila; Wabnitz, Colette C. C.; Menoud, Mathilde; Le Moullac, Gilles; Levy, Peva; Gilbert, Antoine; Remoissenet, Georges

2017-01-01

Shell growth, reproduction, and natural mortality of the giant clam Tridacna maxima were characterized over a two-year-period in the lagoon of the high island of Tubuai (Austral Archipelago) and in the semi-closed lagoon of Tatakoto (Tuamotu Archipelago) in French Polynesia. We also recorded temperature, water level, tidal slope, tidal range, and mean wave height in both lagoons. Lower lagoon aperture and exposure to oceanic swells at Tatakoto than at Tubuai was responsible for lower lagoon water renewal, as well as higher variability in temperature and water level at Tatakoto across the studied period. These different environmental conditions had an impact on giant clams. Firstly, spawning events in the lagoon of Tatakoto, detected by gonad maturity indices in June and July 2014, were timed with high oceanic water inflow and a decrease in lagoon water temperature. Secondly, temperature explained differences in shell growth rates between seasons and lagoons, generating different growth curves for the two sites. Thirdly, local mortality rates were also found to likely be related to water renewal patterns. In conclusion, our study suggests that reef aperture and lagoon water renewal rates play an integral role in giant clam life history, with significant differences in rates of shell growth, mortality and fertility found between open versus semi-closed atoll lagoons in coral reef ecosystems. PMID:28118406

Growth, Survival and Reproduction of the Giant Clam Tridacna maxima (Röding 1798, Bivalvia in Two Contrasting Lagoons in French Polynesia.

Directory of Open Access Journals (Sweden)

Simon Van Wynsberge

Full Text Available Shell growth, reproduction, and natural mortality of the giant clam Tridacna maxima were characterized over a two-year-period in the lagoon of the high island of Tubuai (Austral Archipelago and in the semi-closed lagoon of Tatakoto (Tuamotu Archipelago in French Polynesia. We also recorded temperature, water level, tidal slope, tidal range, and mean wave height in both lagoons. Lower lagoon aperture and exposure to oceanic swells at Tatakoto than at Tubuai was responsible for lower lagoon water renewal, as well as higher variability in temperature and water level at Tatakoto across the studied period. These different environmental conditions had an impact on giant clams. Firstly, spawning events in the lagoon of Tatakoto, detected by gonad maturity indices in June and July 2014, were timed with high oceanic water inflow and a decrease in lagoon water temperature. Secondly, temperature explained differences in shell growth rates between seasons and lagoons, generating different growth curves for the two sites. Thirdly, local mortality rates were also found to likely be related to water renewal patterns. In conclusion, our study suggests that reef aperture and lagoon water renewal rates play an integral role in giant clam life history, with significant differences in rates of shell growth, mortality and fertility found between open versus semi-closed atoll lagoons in coral reef ecosystems.

Effect of thermal aging on grain structural characteristic and Ductile-to-Brittle transition temperature of CLAM steel at 550 °C

Energy Technology Data Exchange (ETDEWEB)

Wang, Wei [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230031 (China); Chen, Jianwei [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); Xu, Gang, E-mail: gang.xu@fds.org.cn [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China)

2017-02-15

Highlights: • The grain boundary length per unit area decreased with the increasing aging time. • The fraction of LABs increased obviously after thermal aging. • Prior austenitic grain refinement is more important to improve low temperature toughness. - Abstract: In this work, electron backscatter diffraction (EBSD) was used to investigate the grain structure evolution of China low activation martensitic (CLAM) steel samples which were aged at 550 °C for 0 h, 2000 h, 4000 h and 10,000 h. The results showed that the prior austenitic grain size increased with the aging time, which led to the decrease of grain boundary length. The fraction of misorientation angle in a range from about 4 to 10° increased obviously after thermal aging for 10,000 h, and it indicated that the fine subgrains formed in the CLAM steel during the long-term thermal exposure. Furthermore, Charpy impact experiments were carried out to analyze the toughness of the CLAM steel before and after aging, particularly the Ductile-to-Brittle Transition Temperature (DBTT). Though amounts of fine subgrians formed in matrix, a substantial increase in DBTT (∼40.1 °C) had been noticed after aging for 10,000 h. The results showed that the high angle boundaries such as prior austenitic grain boundaries are more effective in retarding the propagation of cleavage crack than subgrain boundaries.

Systems-level modeling the effects of arsenic exposure with sequential pulsed and fluctuating patterns for tilapia and freshwater clam

International Nuclear Information System (INIS)

Chen, W.-Y.; Tsai, J.-W.; Ju, Y.-R.; Liao, C.-M.

2010-01-01

The purpose of this paper was to use quantitative systems-level approach employing biotic ligand model based threshold damage model to examine physiological responses of tilapia and freshwater clam to sequential pulsed and fluctuating arsenic concentrations. We tested present model and triggering mechanisms by carrying out a series of modeling experiments where we used periodic pulses and sine-wave as featured exposures. Our results indicate that changes in the dominant frequencies and pulse timing can shift the safe rate distributions for tilapia, but not for that of freshwater clam. We found that tilapia increase bioenergetic costs to maintain the acclimation during pulsed and sine-wave exposures. Our ability to predict the consequences of physiological variation under time-varying exposure patterns has also implications for optimizing species growing, cultivation strategies, and risk assessment in realistic situations. - Systems-level modeling the pulsed and fluctuating arsenic exposures.

Systems-level modeling the effects of arsenic exposure with sequential pulsed and fluctuating patterns for tilapia and freshwater clam

Energy Technology Data Exchange (ETDEWEB)

Chen, W.-Y. [Department of Bioenvironmental Systems Engineering, National Taiwan University, Taipei 10617, Taiwan (China); Tsai, J.-W. [Institute of Ecology and Evolutionary Ecology, China Medical University, Taichung 40402, Taiwan (China); Ju, Y.-R. [Department of Bioenvironmental Systems Engineering, National Taiwan University, Taipei 10617, Taiwan (China); Liao, C.-M., E-mail: cmliao@ntu.edu.t [Department of Bioenvironmental Systems Engineering, National Taiwan University, Taipei 10617, Taiwan (China)

2010-05-15

The purpose of this paper was to use quantitative systems-level approach employing biotic ligand model based threshold damage model to examine physiological responses of tilapia and freshwater clam to sequential pulsed and fluctuating arsenic concentrations. We tested present model and triggering mechanisms by carrying out a series of modeling experiments where we used periodic pulses and sine-wave as featured exposures. Our results indicate that changes in the dominant frequencies and pulse timing can shift the safe rate distributions for tilapia, but not for that of freshwater clam. We found that tilapia increase bioenergetic costs to maintain the acclimation during pulsed and sine-wave exposures. Our ability to predict the consequences of physiological variation under time-varying exposure patterns has also implications for optimizing species growing, cultivation strategies, and risk assessment in realistic situations. - Systems-level modeling the pulsed and fluctuating arsenic exposures.

Effects of LSP on micro-structures and residual stresses in a 4 mm CLAM steel weld joints

Energy Technology Data Exchange (ETDEWEB)

Chen, Xizhang, E-mail: chenxizhang@wzu.edu.cn [School of Mechanical and Electrical Engineering, Wenzhou University., Wenzhou 325035 (China); School of Materials Science and Engineering, Jiangsu University, Zhenjiang 212013, Jiangsu (China); Fang, Yuanyuan [School of Materials Science and Engineering, Jiangsu University, Zhenjiang 212013, Jiangsu (China); Zhang, Shuyan; Kelleher, Joe F. [ISIS, Rutherford Appleton Laboratory, Chilton, Didcot OX11 0QX (United Kingdom); Zhou, Jianzhong [School of Mechanical Engineering, Jiangsu University, Zhenjiang 212013, Jiangsu (China)

2015-05-15

The effects of laser shock processing (LSP) on the distribution of residual stress and micro-structure of China Low Activation Martensitic (CLAM) steel weldment were investigated via neutron diffraction and optical microscope (OM). A pair of 4 mm CLAM steel plates joined by GTA welding. Special attention is paid to the generation of high level compressive residual stresses introduced by LSP. Residual stress in longitudinal, normal and transversal direction at weldment surface and longitudinal stress through thickness are evaluated via neutron diffraction. Compressive residual stress after LSP occurred at more than 90% areas within the weld joint, it is almost double the areas of compressive stress compare to weldment surface before LSP. The maximum compressive normal residual stress becomes to −183 MPa after LSP from −63 MPa before LSP. The Modification of surface micro-structures including weld zone (WZ), heat affected zone (HAZ) and base metal (BM) are also discussed. Results to date demonstrate that laser shock processing has been a great potential method for the improvement of mechanical performance of components.

Rad-hard embedded computers for nuclear robotics

International Nuclear Information System (INIS)

Giraud, A.; Joffre, F.; Marceau, M.; Robiolle, M.; Brunet, J.P.; Mijuin, D.

1993-01-01

For requirements of nuclear industries, it is necessary to use robots with embedded rad hard electronics and high level safety. The computer developed for french research program SYROCO is presented in this paper. (authors). 8 refs., 5 figs

Hard electronics; Hard electronics

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

Hard material technologies were surveyed to establish the hard electronic technology which offers superior characteristics under hard operational or environmental conditions as compared with conventional Si devices. The following technologies were separately surveyed: (1) The device and integration technologies of wide gap hard semiconductors such as SiC, diamond and nitride, (2) The technology of hard semiconductor devices for vacuum micro- electronics technology, and (3) The technology of hard new material devices for oxides. The formation technology of oxide thin films made remarkable progress after discovery of oxide superconductor materials, resulting in development of an atomic layer growth method and mist deposition method. This leading research is expected to solve such issues difficult to be easily realized by current Si technology as high-power, high-frequency and low-loss devices in power electronics, high temperature-proof and radiation-proof devices in ultimate electronics, and high-speed and dense- integrated devices in information electronics. 432 refs., 136 figs., 15 tabs.

Ductile Binder Phase For Use With Almgb14 And Other Hard Ceramic Materials

Science.gov (United States)

Cook, Bruce A.; Russell, Alan; Harringa, Joel

2005-07-26

This invention relates to a ductile binder phase for use with AlMgB14 and other hard materials. The ductile binder phase, a cobalt-manganese alloy, is used in appropriate quantities to tailor good hardness and reasonable fracture toughness for hard materials so they can be used suitably in industrial machining and grinding applications.

PARTICLE REMOVAL RATES BY THE MUD SHRIMP UPOGEBIA PUGETTENSIS, ITS BURROW, AND A COMMENSAL CLAM: EFFECTS ON ESTUARINE PHYTOPLANKTON ABUNDANCE

Science.gov (United States)

The burrowing shrimp Upogebia pugettensis is an abundant intertidal inhabitant of Pacific Northwest bays and estuaries where it lives commensally with the bivalve Cryptomya californica. Suspension-feeding activities by the shrimp and by its commensal clam, as well as particle se...

Clams sensitivity towards As and Hg: A comprehensive assessment of native and exotic species.

Science.gov (United States)

Velez, Cátia; Freitas, Rosa; Antunes, Sara C; Soares, Amadeu M V M; Figueira, Etelvina

2016-03-01

To assess the environmental impact of As and Hg, bioindicator organisms such as bivalves have been used. Nevertheless, few studies have assessed the impacts of As and Hg in Ruditapes decussatus and Ruditapes philippinarum, which are native and exotic species in Europe, respectively. The main goal of the present study was to assess elements' partitioning and detoxification strategies of R. decussatus and R. philippinarum. Both clams showed a higher capacity to bioconcentrate Hg (BCF 2.29-7.49), when compared to As (0.59-1.09). Furthermore, As accumulation in both species was similar in the soluble and insoluble fractions, while in both species the majority of Hg was found in the insoluble fraction. Clams exposed to As showed different detoxification strategies, since R. decussatus had higher ability to enhance antioxidant enzymes and metallothioneins in order to reduce toxicity, and R.philippinarum increased glutathione S-transferase Ω activity, that catalyzes monomethyl arsenate reduction, the rate-limiting reaction in arsenic biotransformation. When exposed to Hg, R. decussatus presented, higher synthesis of antioxidant enzymes and lower LPO, being able to better tolerate Hg than the exotic species R. philippinarum. Thus under relevant levels of As and Hg contamination our work evidenced the higher ability of R. decussatus to survive and inhabit coastal environments not heavily contaminated by Hg and As. Copyright © 2015 Elsevier Inc. All rights reserved.

Comparison of corrosion behavior of EUROFER and CLAM steels in flowing Pb–15.7Li

Energy Technology Data Exchange (ETDEWEB)

Konys, J., E-mail: juergen.konys@kit.edu [Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Krauss, W. [Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Zhu, Z.; Huang, Q. [Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China)

2014-12-15

Ferritic martensitic steels are envisaged to be applied as structural materials in HCLL blanket systems. Their compatibility with the liquid breeder, which is in direct contact with the structural alloy, will be essential for reliable and safe operation of the designed blankets. Formerly performed corrosion tests of RAFM steels in PICOLO loop of KIT were mainly done at high flow velocities, e.g., 0.22 m/s and delivered severe attack with material loss rates above 400 μm/yr at 823 K. Meanwhile, flow velocities for corrosion testing have been reduced into the “cm range” to be near fusion relevant conditions. Among the international ITER-partners, many varieties of RAFM steels have been developed and manufactured within the last decade, e.g., the so-called Chinese Low Activation Martensitic steel (CLAM). In this paper, the long term corrosion behavior of EUROFER and CLAM steel in flowing Pb–15.7Li will be presented at a flow velocity of about 0.10 m/s and compared with earlier obtained results of RAFM steels exposed at other operation parameters of PICOLO loop. The observed corrosion attack is near 220 μm/yr and fits well to predictions made by MATLIM-modeling for low flow velocities in the turbulent flow regime.

Laboratory simulation reveals significant impacts of ocean acidification on microbial community composition and host-pathogen interactions between the blood clam and Vibrio harveyi.

Science.gov (United States)

Zha, Shanjie; Liu, Saixi; Su, Wenhao; Shi, Wei; Xiao, Guoqiang; Yan, Maocang; Liu, Guangxu

2017-12-01

It has been suggested that climate change may promote the outbreaks of diseases in the sea through altering the host susceptibility, the pathogen virulence, and the host-pathogen interaction. However, the impacts of ocean acidification (OA) on the pathogen components of bacterial community and the host-pathogen interaction of marine bivalves are still poorly understood. Therefore, 16S rRNA high-throughput sequencing and host-pathogen interaction analysis between blood clam (Tegillarca granosa) and Vibrio harveyi were conducted in the present study to gain a better understanding of the ecological impacts of ocean acidification. The results obtained revealed a significant impact of ocean acidification on the composition of microbial community at laboratory scale. Notably, the abundance of Vibrio, a major group of pathogens to many marine organisms, was significantly increased under ocean acidification condition. In addition, the survival rate and haemolytic activity of V. harveyi were significantly higher in the presence of haemolymph of OA treated T. granosa, indicating a compromised immunity of the clam and enhanced virulence of V. harveyi under future ocean acidification scenarios. Conclusively, the results obtained in this study suggest that future ocean acidification may increase the risk of Vibrio pathogen infection for marine bivalve species, such as blood clams. Copyright © 2017 Elsevier Ltd. All rights reserved.

Evaluation of toxicological effects induced by tributyltin in clam Ruditapes decussatus using high-resolution magic angle spinning nuclear magnetic resonance spectroscopy: Study of metabolic responses in heart tissue and detection of a novel metabolite.

Science.gov (United States)

Hanana, H; Simon, G; Kervarec, N; Cérantola, S

2014-01-01

Tributyltin (TBT) is a highly toxic pollutant present in many aquatic ecosystems. Its toxicity in mollusks strongly affects their performance and survival. The main purpose of this study was to elucidate the mechanisms of TBT toxicity in clam Ruditapes decussatus by evaluating the metabolic responses of heart tissues, using high-resolution magic angle-spinning nuclear magnetic resonance (HRMAS NMR), after exposure to TBT (10 -9 , 10 -6 and 10 -4 M) during 24 h and 72 h. Results show that responses of clam heart tissue to TBT exposure are not dose dependent. Metabolic profile analyses indicated that TBT 10 -6 M, contrary to the two other doses tested, led to a significant depletion of taurine and betaine. Glycine levels decreased in all clam groups treated with the organotin. It is suggested that TBT abolished the cytoprotective effect of taurine, betaine and glycine thereby inducing cardiomyopathie. Moreover, results also showed that TBT induced increase in the level of alanine and succinate suggesting the occurrence of anaerobiosis particularly in clam group exposed to the highest dose of TBT. Taken together, these results demonstrate that TBT is a potential toxin with a variety of deleterious effects on clam and this organotin may affect different pathways depending to the used dose. The main finding of this study was the appearance of an original metabolite after TBT treatment likely N-glycine-N'-alanine. It is the first time that this molecule has been identified as a natural compound. Its exact role is unknown and remains to be elucidated. We suppose that its formation could play an important role in clam defense response by attenuating Ca 2+ dependent cell death induced by TBT. Therefore this compound could be a promising biomarker for TBT exposure.

Irradiation preservation of Korean shellfish

International Nuclear Information System (INIS)

Chung, J.R.; Kim, S.I.; Lee, M.C.

1976-01-01

Pacific oyster, hard clam and mussel were irradiated at doses up to 0.5 Mrad, the optimum dose rather than the maximum permissible was sought for in each species and post-irradiation storage characteristics studied at 0 0 and 5 0 C. No shellfish meat irradiated at doses as high as 0.5 Mrad produced any adverse odor. However the organoleptic quality of each sample irradiated at lower doses was superior to those irradiated at the higher during the early storage period. The optimum dose was determined to be 0.2 Mrad for Pacific oyster and mussel and 0.1 Mrad for hard clam. By irradiating at the optimum dose, the storage life of Pacific oyster could be extended from less than 14 days to 35 days at 0 0 C and from only 3 days to 21 days at 5 0 C. A similar storage extension was observed from 7 days to 14 days at 0 0 C and from 3 days to 12 days at 5 0 C. The hard clam meats were particularly susceptible to tissue softening by irradiation; an earlier onset and more extensive softening were observed with increasing dose. (author)

Selecting a set of housekeeping genes for quantitative real-time PCR in normal and tetraploid haemocytes of soft-shell clams, Mya arenaria.

Science.gov (United States)

Siah, A; Dohoo, C; McKenna, P; Delaporte, M; Berthe, F C J

2008-09-01

The transcripts involved in the molecular mechanisms of haemic neoplasia in relation to the haemocyte ploidy status of the soft-shell clam, Mya arenaria, have yet to be identified. For this purpose, real-time quantitative RT-PCR constitutes a sensitive and efficient technique, which can help determine the gene expression involved in haemocyte tetraploid status in clams affected by haemic neoplasia. One of the critical steps in comparing transcription profiles is the stability of selected housekeeping genes, as well as an accurate normalization. In this study, we selected five reference genes, S18, L37, EF1, EF2 and actin, generally used as single control genes. Their expression was analyzed by real-time quantitative RT-PCR at different levels of haemocyte ploidy status in order to select the most stable genes. Using the geNorm software, our results showed that L37, EF1 and S18 represent the most stable gene expressions related to various ploidy status ranging from 0 to 78% of tetraploid haemocytes in clams sampled in North River (Prince Edward Island, Canada). However, actin gene expression appeared to be highly regulated. Hence, using it as a housekeeping gene in tetraploid haemocytes can result in inaccurate data. To compare gene expression levels related to haemocyte ploidy status in Mya arenaria, using L37, EF1 and S18 as housekeeping genes for accurate normalization is therefore recommended.

Large-scale mitochondrial COI gene sequence variability reflects the complex colonization history of the invasive soft-shell clam, Mya arenaria (L.) (Bivalvia)

Science.gov (United States)

Lasota, Rafal; Pierscieniak, Karolina; Garcia, Pascale; Simon-Bouhet, Benoit; Wolowicz, Maciej

2016-11-01

The aim of the study was to determine genetic diversity in the soft-shell clam Mya arenaria on a wide geographical scale using mtDNA COI gene sequences. Low levels of genetic diversity was found, which can most likely be explained by a bottleneck effect during Pleistocene glaciations and/or selection. The geographical genetic structuring of the studied populations was also very low. The star-like phylogeny of the haplotypes indicates a relatively recent, rapid population expansion following the glaciation period and repeated expansion following the founder effect(s) after the initial introduction of the soft-shell clam to Europe. North American populations are characterized by the largest number of haplotypes, including rare ones, as expected for native populations. Because of the founder effect connected with initial and repeated expansion events, European populations have significantly lower numbers of haplotypes in comparison with those of North America. We also observed subtle differentiations among populations from the North and Baltic seas. The recently founded soft-shell clam population in the Black Sea exhibited the highest genetic similarity to Baltic populations, which confirmed the hypothesis that M. arenaria was introduced to the Gulf of Odessa from the Baltic Sea. The most enigmatic results were obtained for populations from the White Sea, which were characterized by high genetic affinity with American populations.

Best management strategies for sustainable giant clam fishery in French Polynesia islands: answers from a spatial modeling approach.

Directory of Open Access Journals (Sweden)

Simon Van Wynsberge

Full Text Available The giant clam Tridacna maxima has been largely overexploited in many tropical regions over the past decades, and was therefore listed in appendix II of the Convention of International Trade in Endangered Species (CITES in 1985. In French Polynesia, several atolls and islands harbor the world's highest stocks of giant clams in very shallow and accessible areas, which are therefore highly vulnerable to fishing pressure. The local fishery authority (i.e., Direction des Resources Marines or "DRM" implemented several management schemes in 2002 to control and regulate fishing pressure. However, for further decisions DRM was missing a sensitivity analysis on the effectiveness of the possible management actions. Here, we report on the use of a deterministic Viable Population Analysis (VPA and spatially-explicit age-based population model that simulated the 30-year trajectory of a Tridacna maxima stock under different management approaches. Specifically, given various scenarios of intra-island larval dispersal, we tested which of No-take-Areas (NTAs, rotational closures, size limits, quotas, and restocking schemes would lead to the highest future stocks in Tubuai and Raivavae, two exploited islands of the Austral archipelago. For both islands, stock abundances were estimated in 2004/2010 and 2005/2010 respectively, and natural mortalities were assessed previously only in Tubuai. When compared to field data, the model successfully predicted the 2010 stocks for Tubuai, but proved to be less reliable for Raivavae, where natural mortality rates may well be different from those on Tubuai. For Tubuai, the spatial model suggested that reducing fishing effort (through fixed quotas and banning fishing below the 12 cm size limit (as currently implemented were the most effective management actions to sustain T. maxima populations into the future. Implementing NTAs was of poor effectiveness. NTAs increased giant clam stock inside the protected area, but also

Welding techniques development of CLAM steel for Test Blanket Module

Energy Technology Data Exchange (ETDEWEB)

Li Chunjing [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, Anhui, 230027 (China)], E-mail: lcj@ipp.ac.cn; Huang Qunying; Wu Qingsheng; Liu Shaojun [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, Anhui, 230027 (China); Lei Yucheng [Jiangsu University, Zhenjiang, Jiangsu, 212013 (China); Muroga, Takeo; Nagasaka, Takuya [National Institute for Fusion Science, Toki, Jifu, 509-5292 (Japan); Zhang Jianxun [Xi' an Jiaotong University, Xi' an, Shanxi, 710049 (China); Li Jinglong [Northwestern Polytechnical University, Xi' an, Shanxi, 710072 (China)

2009-06-15

Fabrication techniques for Test Blanket Module (TBM) with CLAM are being under development. Effect of surface preparation on the HIP diffusion bonding joints was studied and good joints with Charpy impact absorbed energy close to that of base metal have been obtained. The mechanical properties test showed that effect of HIP process on the mechanical properties of base metal was little. Uniaxial diffusion bonding experiments were carried out to study the effect of temperature on microstructure and mechanical properties. And preliminary experiments on Electron Beam Welding (EBW), Tungsten Inert Gas (TIG) Welding and Laser Beam Welding (LBW) were performed to find proper welding techniques to assemble the TBM. In addition, the thermal processes assessed with a Gleeble thermal-mechanical machine were carried out as well to assist the fusion welding research.

Histopathological survey of the mussel Mytilus chilensis (Mytilidae and the clam Gari solida (Psammobiidae from southern Chile

Directory of Open Access Journals (Sweden)

Florencia Cremonte

2015-03-01

Full Text Available A total of 175 specimens of mussels, Mytilus chilensis (Mytilidae, and 56 specimens of clams, Gari solida (Psammobiidae, were collected in natural beds and culture sites of southern Chile. Juvenile mussel specimens (3 cm of maximum length were free of parasites and diseases, whilst the commercial sized populations was parasitized by intracellular inclusions of bacteria-like organisms in the digestive gland epithelium and in the gills, by ciliates in the gills, turbellarians similar to Paravortex (Rhabocoela in the intestine lumen and copepods attached to the gills. In addition, the disseminated neoplasia disease was also present although in low prevalences. In the clam, G. solida, prokariotic inclusions were found in the digestive gland epithelium and bacteria-like organisms in the gills, often encapsulated by haemocytes; oocysts containing up to 8 sporozoites similar to Nematopsis (Apicomplexa in the connective tissue, causing haemocytic infiltration when the intensity of infection was high; ciliates belonging to two different species (one of them similar to Trichodina inhabiting the gills; and a turbellarian similar to Paravortex in the lumen of digestive system without apparent host reaction. The populations of the bivalve species here studied were devoid of serious pathogens.

Identification of Angiotensin I-Converting Enzyme Inhibitory Peptides Derived from Enzymatic Hydrolysates of Razor Clam Sinonovacula constricta

Directory of Open Access Journals (Sweden)

Yun Li

2016-06-01

Full Text Available Angiotensin I-converting enzyme (ACE inhibitory activity of razor clam hydrolysates produced using five proteases, namely, pepsin, trypsin, alcalase, flavourzyme and proteases from Actinomucor elegans T3 was investigated. Flavourzyme hydrolysate showed the highest level of degree of hydrolysis (DH (45.87% followed by A. elegans T3 proteases hydrolysate (37.84% and alcalase (30.55%. The A. elegans T3 proteases was observed to be more effective in generating small peptides with ACE-inhibitory activity. The 3 kDa membrane permeate of A. elegans T3 proteases hydrolysate showed the highest ACE-inhibitory activity with an IC50 of 0.79 mg/mL. After chromatographic separation by Sephadex G-15 gel filtration and reverse phase-high performance liquid chromatography, the potent fraction was subjected to MALDI/TOF-TOF MS/MS for identification. A novel ACE-inhibitory peptide (VQY was identified exhibiting an IC50 of 9.8 μM. The inhibitory kinetics investigation by Lineweaver-Burk plots demonstrated that the peptide acts as a competitive ACE inhibitor. The razor clam hydrolysate obtained by A. elegans T3 proteases could serve as a source of functional peptides with ACE-inhibitory activity for physiological benefits.

Single nucleotide polymorphisms in i-type lysozyme gene and their correlation with vibrio-resistance and growth of clam Meretrix meretrix based on the selected resistance stocks.

Science.gov (United States)

Yue, Xin; Wang, Hongxia; Huang, Xiaohong; Wang, Chao; Chai, Xueliang; Wang, Chunde; Liu, Baozhong

2012-09-01

I-type lysozyme is considered to play crucial roles in both anti-bacteria and digestion function of the bivalve, which signifies that it is related to both immunity and growth. In this study, based on the principle of case-control association analysis, using the stock materials with different vibrio-resistance profile obtained by selective breeding, single nucleotide polymorphisms (SNPs) in the DNA partial sequence of an i-type lysozyme of Meretrix meretrix (MmeLys) were discovered and examined for their association with vibrio-resistance and growth. Twenty-seven SNPs were detected and fifteen of them were genotyped in clam stocks with different resistance to Vibrio harveyi (09-C and 09-R) and to Vibrio parahaemolyticus (11-S and 11-R). Allele frequency distribution among different stocks was compared. And wet weight of clams with different genotype at each SNP locus was compared. The results indicated that SNP locus 9 was associated with V. harveyi and V. parahaemolyticus resistance and growth of M. meretrix. Loci 12 and 14 were associated with both V. parahaemolyticus-resistance and growth, and also have the potential to be related with V. harveyi-resistance of M. meretrix. Therefore these three SNPs especially locus 9 were the potential markers which may be involved in assisting resistance selective breeding. In addition, this study showed evidence that improvements in clam resistance to vibriosis could be achieved through selective breeding. All results provided encouragement for the continuation of the selective breeding program for vibrio-resistance gain in clam M. meretrix and the application of polymorphisms in MmeLys to the future marker assisted selection. Copyright © 2012 Elsevier Ltd. All rights reserved.

A quantitative estimation of the energetic cost of brown ring disease in the Manila clam using Dynamic Energy Budget theory.

NARCIS (Netherlands)

Flye Sainte Marie, J.G.; Jean, F.; Paillard, C.; Kooijman, S.A.L.M.

2009-01-01

Brown ring disease (BRD) in the Manila clam, Ruditapes philippinarum, is a bacterial disease caused by the pathogen Vibrio tapetis. This disease induces the formation of a characteristic brown conchiolin deposit on the inner shell and is associated with a decrease in condition index indicating that

Surface Roughness Analysis in the Hard Milling of JIS SKD61 Alloy Steel

OpenAIRE

Huu-That Nguyen; Quang-Cherng Hsu

2016-01-01

Hard machining is an efficient solution that can be used to replace the grinding operation in the mold and die manufacturing industry. In this study, an attempt is made to analyze the effect of process parameters on workpiece surface roughness (Ra) in the hard milling of JIS (Japanese Industrial Standard) SKD61 steel, based on a combination of the Taguchi method and response surface methodology (RSM). The cutting parameters are selected based on the structural dynamic analysis of the machine ...

Two new miniature inverted-repeat transposable elements in the genome of the clam Donax trunculus.

Science.gov (United States)

Šatović, Eva; Plohl, Miroslav

2017-10-01

Repetitive sequences are important components of eukaryotic genomes that drive their evolution. Among them are different types of mobile elements that share the ability to spread throughout the genome and form interspersed repeats. To broaden the generally scarce knowledge on bivalves at the genome level, in the clam Donax trunculus we described two new non-autonomous DNA transposons, miniature inverted-repeat transposable elements (MITEs), named DTC M1 and DTC M2. Like other MITEs, they are characterized by their small size, their A + T richness, and the presence of terminal inverted repeats (TIRs). DTC M1 and DTC M2 are 261 and 286 bp long, respectively, and in addition to TIRs, both of them contain a long imperfect palindrome sequence in their central parts. These elements are present in complete and truncated versions within the genome of the clam D. trunculus. The two new MITEs share only structural similarity, but lack any nucleotide sequence similarity to each other. In a search for related elements in databases, blast search revealed within the Crassostrea gigas genome a larger element sharing sequence similarity only to DTC M1 in its TIR sequences. The lack of sequence similarity with any previously published mobile elements indicates that DTC M1 and DTC M2 elements may be unique to D. trunculus.

Processed Apple Product Marketing Analysis: Hard Cider and Apple Wine

OpenAIRE

Rowles, Kristin

2000-01-01

Hard cider and apple wine offer new value-added marketing opportunities to the apple industry. Both products are situated in rapidly growing categories of the beverage industry. The development of effective marketing strategies for these products requires an understanding of the forces driving competition in these markets. This paper provides background information to support competitive analysis and strategy development. Development of these markets will be positive for the apple industry, b...

Effects of environmental and biological conditions on the recruitment and growth of the Manila clam Ruditapes philippinarum on the west coast of Korea

Science.gov (United States)

Kim, Sang Lyeol; Kwon, Soon Hyun; Lee, Hyung-Gon; Yu, Ok Hwan

2017-03-01

The distribution of the Manila clam Ruditapes philippinarum, which is often dominant in intertidal zones, is influenced by both environmental and biological conditions. However, there have been few comprehensive studies on the interactive effects of these two groups of factors. The present study examined the environmental and biological parameters determining the population dynamics of the clams that is a dominant component of the intertidal communities of Euhangri and Padori on the west coast of Korean peninsula. We collected R. philippinarum and other members of the macrobenthos (> 1 mm long) monthly from 0.25 m2 quadrats deployed in the intertidal zones at Euhangri, Taean, and Padori during the period from August 2013 to January 2015. Physicochemical parameters of the water and sediment were measured at the same time. Water temperature and salinity is high and low in the summer to winter, respectively. While mean grain size of the sediment was higher at Euhangri than at Padori, total mean density of R. philippinarum was higher at Euhangri (325 ind./ 0.25 m2 at Padori vs. 194 ind./0.25 m2 at Euhangri). Settled spat (population increased, the condition index of individual clams decreased, but as the population density of the spat increased the body condition index increased. The chlorophyll a content of the sediments at Padori exceeded that at Euhangri and decreased as the population of R. philippinarum increased. The shapes of R. philippinarum shells at Euhangri were more prolate than those at Padori, and the condition index at Euhangri exceeded that at Padori, indicating better growth conditions at Euhangri. The condition index and density of R. philippinarum were affected by the amount of chlorophyll a in the water column and in the sediment. The recruitment success of spats was negatively influenced by spat density. We suggest that regulation of habitat conditions for R. philippinarum, including the food supply, will optimize production of these commercial

Acute and chronic exposure in mussel (aulacomya ater) and clam (semelle solida) with Cs137

International Nuclear Information System (INIS)

Bringas, J.E.

1996-01-01

Two of the most common Peruvian benthonic molluscs, have been shown to be effective concentrators of Cesium-137 and have also proven useful as indicators of that radionuclide in their natural environment, according with results in this paper. However the clam is a better indicator, when determining environmental acute release of Cesium-137 due to reactor accidents, nuclear tests, accidents in nuclear ships, submarines and radioactive material transport, and the mussel for a continuous monitoring of environmental radio contaminant levels. (author). 11 refs

Expression of a symbiosis-specific gene in Symbiodinium type A1 associated with coral, nudibranch and giant clam larvae

KAUST Repository

Mies, M.

2017-05-24

Symbiodinium are responsible for the majority of primary production in coral reefs and found in a mutualistic symbiosis with multiple animal phyla. However, little is known about the molecular signals involved in the establishment of this symbiosis and whether it initiates during host larval development. To address this question, we monitored the expression of a putative symbiosis-specific gene (H+-ATPase) in Symbiodinium A1 ex hospite and in association with larvae of a scleractinian coral (Mussismilia hispida), a nudibranch (Berghia stephanieae) and a giant clam (Tridacna crocea). We acquired broodstock for each host, induced spawning and cultured the larvae. Symbiodinium cells were offered and larval samples taken for each host during the first 72 h after symbiont addition. In addition, control samples including free-living Symbiodinium and broodstock tissue containing symbionts for each host were collected. RNA extraction and RT-PCR were performed and amplified products cloned and sequenced. Our results show that H+-ATPase was expressed in Symbiodinium associated with coral and giant clam larvae, but not with nudibranch larvae, which digested the symbionts. Broodstock tissue for coral and giant clam also expressed H+-ATPase, but not the nudibranch tissue sample. Our results of the expression of H+-ATPase as a marker gene suggest that symbiosis between Symbiodinium and M. hispida and T. crocea is established during host larval development. Conversely, in the case of B. stephanieae larvae, evidence does not support a mutualistic relationship. Our study supports the utilization of H+-ATPase expression as a marker for assessing Symbiodinium-invertebrate relationships with applications for the differentiation of symbiotic and non-symbiotic associations. At the same time, insights from a single marker gene approach are limited and future studies should direct the identification of additional symbiosis-specific genes, ideally from both symbiont and host.

Changes in hardness of magnesium alloys due to precipitation hardening

Directory of Open Access Journals (Sweden)

Tatiana Oršulová

2018-04-01

Full Text Available This paper deals with the evaluation of changes in hardness of magnesium alloys during precipitation hardening that are nowadays widely used in different fields of industry. It focuses exactly on AZ31, AZ61 and AZ91 alloys. Observing material hardness changes serves as an effective tool for determining precipitation hardening parameters, such as temperature and time. Brinell hardness measurement was chosen based on experimental needs. There was also necessary to make chemical composition analysis and to observe the microstructures of tested materials. The obtained results are presented and discussed in this paper.

Shell shape analysis and spatial allometry patterns of Manila Clam (Ruditapes philippinarium) in a mesotidal coastal lagoon

OpenAIRE

Caill-Milly, Nathalie; Bru, Noëlle; Mahé, Kélig; D'Amico, Franck

2012-01-01

While gradual allometric changes of shells are intrinsically driven by genotype, morphometrical shifts can also be modulated by local environmental conditions. Consequently the common use of a unique dimension (usually length) to assess bivalves’ growth may mask phenotypic differences in valve shape among populations. A morphometric exhaustive study was conducted on Manila clam, Ruditapes philippinarum, by acquiring data in the French Arcachon Bay (intrasite phenotypic variability) and by com...

Influence of different cooling rates on the microstructure of the HAZ and welding CCT diagram of CLAM steel

Energy Technology Data Exchange (ETDEWEB)

Zheng Shuhui, E-mail: shzheng@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); Wu Qingsheng [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); Huang Qunying [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, Anhui, 230027 (China); Liu Shaojun; Han Yangyang [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China)

2011-10-15

The evolution of microstructure in the weld HAZ (Heat Affected Zone) under welding thermal cycle was simulated by Gleeble-1500. The microstructures and properties of HAZ at different cooling rates were investigated by optical microscopy (OM), scanning electron microscopy (SEM) and microhardness test. The results showed that when the cooling rates ranged from 3600 K/min to 60 K/min, fully martensitic transformations were achieved, and the cooling rates had little influence on the microstructure and microhardness of martensite. The maximum cooling rate to form ferrite was 60 K/min. When the cooling rates ranged from 60 K/min to 1 K/min, the microhardness of the HAZ began to decrease due to the presence of ferrite, and the lath sizes grew up to 0.13-0.15 {mu}m. The critical cooling rate to gain fully ferrite was found to be slower than 1 K/min. The welding CCT diagram of CLAM steel was constructed and it showed that there were ferrite and martensite transformation regions only. The diagram made it possible to predict the microstructures and properties of HAZ and became an important tool to evaluate weldability of CLAM steel.

Influence of different cooling rates on the microstructure of the HAZ and welding CCT diagram of CLAM steel

International Nuclear Information System (INIS)

Zheng Shuhui; Wu Qingsheng; Huang Qunying; Liu Shaojun; Han Yangyang

2011-01-01

The evolution of microstructure in the weld HAZ (Heat Affected Zone) under welding thermal cycle was simulated by Gleeble-1500. The microstructures and properties of HAZ at different cooling rates were investigated by optical microscopy (OM), scanning electron microscopy (SEM) and microhardness test. The results showed that when the cooling rates ranged from 3600 K/min to 60 K/min, fully martensitic transformations were achieved, and the cooling rates had little influence on the microstructure and microhardness of martensite. The maximum cooling rate to form ferrite was 60 K/min. When the cooling rates ranged from 60 K/min to 1 K/min, the microhardness of the HAZ began to decrease due to the presence of ferrite, and the lath sizes grew up to 0.13-0.15 μm. The critical cooling rate to gain fully ferrite was found to be slower than 1 K/min. The welding CCT diagram of CLAM steel was constructed and it showed that there were ferrite and martensite transformation regions only. The diagram made it possible to predict the microstructures and properties of HAZ and became an important tool to evaluate weldability of CLAM steel.

Influence of skin hardness on dehydration kinetics of wine grapes.

Science.gov (United States)

Rolle, Luca; Caudana, Alberto; Giacosa, Simone; Gerbi, Vincenzo; Río Segade, Susana

2011-02-01

Knowledge of the influence of initial mechanical properties on the evolution of the weight loss of berries through the drying process is scarce. Therefore, the main purpose of this work was to investigate the effect of skin hardness at two different physiological stages of off-vine drying kinetics of grapes. Skin hardness was evaluated as the berry skin-break force parameter, measured by the texture analysis test. The decrease of berry weight as a function of the drying time was linear, indicating that the drying rates were constant within each cultivar studied (Moscato bianco and Erbaluce), and for each ripening stage and berry skin hardness. The drying rates decreased as berry skin hardness increased for the ripest grapes in the cultivars studied. The study allowed the assessment of the correlation between the skin hardness of fresh berries and the weight loss determined for different drying days. 2010 Society of Chemical Industry.

Development of the 'SEA-Clam' wave energy device for small scale use. Interim report 1st August 1983 - 30th April 1984

Energy Technology Data Exchange (ETDEWEB)

1984-04-01

An Interim Report on the development of the Sea-Clam wave energy device for small scale use is presented. Experimental tests to measure the productivity of the Clam system, using 1/14th linear scale models of a 80 m long x 7 to 9 m deep x 5 m wide device intended for small community use are outlined. A feature of these experiments has been the development of a rotating damper which enables damping rate to be readily varied during a series of successive tests, a major advance in power measurements of air systems at this scale. Development of corded bags, progress made during the period with mathematical modelling of the turbine-generator power take-off system, and use of paralleled induction generators run at near-synchronous speed in conjuction with either a 3-phase base supply or an on-board alternator to provide magnetization current are discussed.

Ecotoxicological evaluation of tributyltin toxicity to the equilateral venus clam, Gomphina veneriformis (Bivalvia: Veneridae).

Science.gov (United States)

Park, Kiyun; Kim, Rosa; Park, Jung Jun; Shin, Hyun Chool; Lee, Jung Sick; Cho, Hyeon Seo; Lee, Yeon Gyu; Kim, Jongkyu; Kwak, Inn-Sil

2012-03-01

Tributyltin (TBT) is the most common pesticide in marine and freshwater environments. To evaluate the potential ecological risk posed by TBT, we measured biological responses such as growth rate, gonad index, sex ratio, the percentage of intersex gonads, filtration rate, and gill abnormalities in the equilateral venus clam (Gomphina veneriformis). Additionally, the biochemical and molecular responses were evaluated in G. veneriformis exposed to various concentrations of TBT. The growth of G. veneriformis was significantly delayed in a dose-dependent manner after exposure to all tested TBT concentrations. After TBT was administered to G. veneriformis, the gonad index decreased and the sex balance was altered. The percentage of intersex gonads also increased significantly in treated females, whereas no intersex gonads were detected in the solvent control group. Additionally, intersex gonads were detected in male G. veneriformis specimens exposed to relatively high TBT concentrations (20 μg L⁻¹). The filtration rate was also reduced in a dose-dependent manner in TBT-exposed G. veneriformis. We also noted abnormal gill morphology in TBT-exposed G. veneriformis. Furthermore, increases in antioxidant enzyme activities were observed in TBT-exposed G. veneriformis clams, regardless of dosage. Vitellogenin gene expression also increased significantly in a dose-dependent manner in G. veneriformis exposed to TBT. These results provide valuable information regarding our understanding of the toxicology of TBT in G. veneriformis. Moreover, the responses of biological and molecular factors could be utilized as information for risk assessments and marine monitoring of TBT toxicity. Crown Copyright © 2011. Published by Elsevier Ltd. All rights reserved.

The usability of ark clam shell (Anadara granosa) as calcium precursor to produce hydroxyapatite nanoparticle via wet chemical precipitate method in various sintering temperature.

Science.gov (United States)

Khiri, Mohammad Zulhasif Ahmad; Matori, Khamirul Amin; Zainuddin, Norhazlin; Abdullah, Che Azurahanim Che; Alassan, Zarifah Nadakkavil; Baharuddin, Nur Fadilah; Zaid, Mohd Hafiz Mohd

2016-01-01

This paper reported the uses of ark clam shell calcium precursor in order to form hydroxyapatite (HA) via the wet chemical precipitation method. The main objective of this research is to acquire better understanding regarding the effect of sintering temperature in the fabrication of HA. Throughout experiment, the ratio of Ca:P were constantly controlled, between 1.67 and 2.00. The formation of HA at these ratio was confirmed by means of energy-dispersive X-ray spectroscopy analysis. In addition, the effect of sintering temperature on the formation of HA was observed using X-ray diffraction analysis, while the structural and morphology was determined by means of field emission scanning electron microscopy. The formation of HA nanoparticle was recorded (~35-69 nm) in the form of as-synthesize HA powder. The bonding compound appeared in the formation of HA was carried out using Fourier transform infrared spectroscopy such as biomaterials that are expected to find potential applications in orthopedic and biomedical industries .

Coping with seawater acidification and the emerging contaminant diclofenac at the larval stage: A tale from the clam Ruditapes philippinarum.

Science.gov (United States)

Munari, Marco; Chemello, Giulia; Finos, Livio; Ingrosso, Gianmarco; Giani, Michele; Marin, Maria G

2016-10-01

Seawater acidification could alter the susceptibility of marine organisms to emerging contaminants, such as pharmaceuticals. In this study, the combined effects of seawater acidification and the non-steroidal anti-inflammatory drug diclofenac on survival, growth and oxidative stress-related parameters (catalase activity and lipid peroxidation) in the larvae of the Manila clam Ruditapes philippinarum were investigated for the first time. An experimental flow-through system was set up to carry out a 96-h exposure of clam larvae. Two pH levels (pH 8.0, the control, and pH 7.8, the predicted pH by the end of this century) were tested with and without diclofenac (0.5 μg/L). After 4 days, mortality was dramatically higher under reduced pH, particularly in the presence of diclofenac (62% of the larvae dead). Shell morphology was negatively affected by both acidification and diclofenac from the first day of exposure. The percentage of abnormal larvae was always higher at pH 7.8 than in controls, peaking at 98% in the presence of diclofenac after 96 h. Instead, shell length, shell height or the ratio of these values were only negatively influenced by reduced pH throughout the whole experiment. After 96 h, catalase activity was significantly increased in all larvae kept at pH 7.8, whereas no significant difference in lipid peroxidation was found among the treatments. This study demonstrates a high susceptibility of R. philippinarum larvae to a slight reduction in seawater pH. Furthermore, the results obtained highlight that acidification enhances the sensitivity of clam larvae to environmentally relevant concentrations of diclofenac. Copyright © 2016 Elsevier Ltd. All rights reserved.

Toxicity removal from hard board wastewater

Energy Technology Data Exchange (ETDEWEB)

Nawar, S.S.; El Kamah, H.

1984-01-01

The rapid growth of industry in Egypt in recent years has made industrial pollution an important issue. During the past decade fish production in some canals and lakes have virtually ceased due to the discharge of industrial and agricultural wastewater. The alternatives under study include effluent treatment before discharge to receiving water. Highly polluted waste from a hard board mill was treated using the activated sludge process. Factors affecting the efficiency of the treatment were detention time and organic loading rate. The results indicated that BOD and phenol reduction reached 82% and 94% respectively, when the organic loading rate was 0.1 (kg BOD/kg SS). The process proved to be successful in completely eliminating the toxicity effect of the waste on Nile fish (Tilapia nilotica). 14 references, 1 figure, 3 tables.

Invasive zebra mussels (Driessena polymorpha) and Asian clams (Corbicula fluminea) survive gut passage of migratory fish species: implications for dispersal

Science.gov (United States)

Gatlin, Michael R.; Shoup, Daniel E.; Long, James M.

2013-01-01

The introduction and spread of invasive species is of great concern to natural resource managers in the United States. To effectively control the spread of these species, managers must be aware of the multitude of dispersal methods used by the organisms. We investigated the potential for survival through the gut of a migrating fish (blue catfish, Ictalurus furcatus) as a dispersal mechanism for two invasive bivalves: zebra mussel (Driessena polymorpha) and Asian clam (Corbicula fluminea). Blue catfish (N = 62) were sampled over several months from Sooner Lake, Oklahoma, transported to a laboratory and held in individual tanks for 48 h. All fecal material was collected and inspected for live mussels. Survival was significantly related to water temperature in the lake at the time of collection, with no mussels surviving above 21.1 C°, whereas 12 % of zebra mussels (N = 939) and 39 % of Asian clams (N = 408) consumed in cooler water survived gut passage. This research demonstrates the potential for blue catfish to serve as a dispersal vector for invasive bivalves at low water temperatures.

Early development, survival and growth rates of the giant clam Tridacna crocea (Bivalvia: Tridacnidae

Directory of Open Access Journals (Sweden)

Miguel Mies

2012-06-01

Full Text Available Tridacnid clams are conspicuous inhabitants of Indo-Pacific coral reefs and are traded and cultivated for the aquarium and food industries. In the present study, daily growth rates of larvae of the giant clam Tridacna crocea were determined in the laboratory during the first week of life. Adults were induced to spawn via intra-gonadal serotonin injection through the byssal orifice. After spawning oocytes were collected, fertilized and kept in 3 L glass beakers and raceways treated with antibiotics to avoid culture contamination. Larvae were fed twice with the microalga Isochrysis galbana and zooxanthellae were also offered twice during the veliger stage (days 4 and 6. Larval length was measured using a digitizing tablet coupled to a microcomputer. Larval mortality was exponential during the first 48 hours of life declining significantly afterwards. Mean growth rate was 11.3 μm day-1, increasing after addition of symbionts to 18.0 μm day-1. Survival increased to ca. 75% after the addition of zooxanthellae. The results describe the growth curve for T. crocea larvae and suggest that the acquisition of symbionts by larvae may be useful for larval growth and survival even before larvae have attained metamorphosis.Bivalves tridacnídeos são habitantes conspícuos dos recifes da região do Indo-Pacífico e são cultivados e comercializados para os mercados alimentício e aquarista. No estudo apresentado foram determinadas as taxas de crescimento diário durante a primeira semana de vida da larva do bivalve ornamental Tridacna crocea. As matrizes foram induzidas à desova por meio de uma injeção intragonadal de serotonina realizada através do orifício bissal. Após desova, ovócitos foram coletados, fertilizados e mantidos em béqueres de vidro e tanques de fluxo contínuo tratados com antibióticos para evitar contaminação. Larvas foram alimentadas em duas ocasiões com a microalga Isochrysis galbana e zooxantelas foram oferecidas também por

Oil industry. A hard after-party

International Nuclear Information System (INIS)

Remoue, A.

2009-01-01

Since the beginning of the year 2009, the oil barrel price stagnates again at a three-time lower level than 8 months ago, compelling the oil companies to change their project schedule, and the para-petroleum industry to reduce its costs. The economic impact is more important for national companies than for oil majors. However, cost saving are implemented by all to save their margin. The first impact concerns the para-petroleum companies which will have to adapt their tariffs to the new situation. When the economy will start up again there is strong probabilities that the oil demand will decline thanks to changes in consumers' behaviors. (J.S.)

Survival and growth of the giant clam larvae utilizing zooxanthellae from Acropora valenciennesi, Tridacna crocea and Sarcophyton trocheliophorum

OpenAIRE

A. Niartiningsih; Magdalena Litaay; Niradhyna W. M

2015-01-01

The aim of this study was to know the survival and growth of the giant clam larvae given zooxanthellae from different host. The field experiment was conducted from September ???November 2006 at hatchery of Marine Field Station Barrang Lompo Island, Makassar. Zooxanthellae hosts used were: (A) Table coral (Acropora valenciennesi); (B) Tridacna crocea, (C) soft coral (Sarcophyton trocheliophorum) and (D) control (no additional zooxanthellae). The Complete Randomized Design with four treatments ...

Species Profiles. Life Histories and Environmental Requirements of Coastal Fishes and Invertebrates (Mid-Atlantic). SURF CLAM

Science.gov (United States)

1983-10-01

ter across the vitelline membrane; the Male and female surf clams are identi- innqr germinal vesicle averages 0.79 cal in external appearance, and...Jones et al. ) (1978) reported age-size relationships In laboratcry experiments con- using cut and polished shells (Table ducted •t 21.7 0 C (71 0 F...and Long Island’s south period (4-6 weeks), due to a persist - shore, out. to a depth of 75 m (246 ent southerly flow of air;. and ft), because of the

Microstructure and mechanical properties in TIG welding of CLAM steel

International Nuclear Information System (INIS)

Zhu Qiang; Lei Yucheng; Chen Xizhang; Ren Wenjie; Ju Xin; Ye Yimin

2011-01-01

Tungsten insert gas (TIG) welding on China low activation martensitic (CLAM) steel under identical conditions was performed. Microhardness test, tensile test, Charpy impact test and microstructure measurements were carried out on TIG welded joints after post weld heat-treatment. Hardening at WM and softening in HAZ is detected in the TIG weld joint. Microhardness in WM decreased when the temperature of PWHT increased. The ultimate tensile stress of weld metal is higher than that of HAZ and BM. Absorbed energy increased with PWHT temperature rising, until PWHT was done at 760 deg. C/30 min, the specimen ductile fractured in local area. The microstructure of the weld metal for every specimen was found to be tempered martensite with a little of delta ferrite. M 23 C 6 particles are the predominant type of carbides. Oxide precipitate phases appeared in WM, which are the primary crack initiation sites and it is critically important minimize their formation.

Effects of ocean acidification driven by elevated CO2 on larval shell growth and abnormal rates of the venerid clam, Mactra veneriformis

Science.gov (United States)

Kim, Jee-Hoon; Yu, Ok Hwan; Yang, Eun Jin; Kang, Sung-Ho; Kim, Won; Choy, Eun Jung

2016-11-01

The venerid clam ( Mactra veneriformis Reeve 1854) is one of the main cultured bivalve species in intertidal and shallow subtidal ecosystems along the west coast of Korea. To understand the effects of ocean acidification on the early life stages of Korean clams, we investigated shell growth and abnormality rates and types in the D-shaped, umbonate veliger, and pediveliger stages of the venerid clam M. veneriformis during exposure to elevated seawater pCO2. In particular, we examined abnormal types of larval shell morphology categorized as shell deformations, shell distortions, and shell fissures. Specimens were incubated in seawater equilibrated with bubbled CO2-enriched air at (400±25)×10-6 (ambient control), (800±25)×10-6 (high pCO2), or (1 200±28)×10-6 (extremely high pCO2), the atmospheric CO2 concentrations predicted for the years 2014, 2084, and 2154 (70-year intervals; two human generations), respectively, in the Representative Concentration Pathway (RCP) 8.5 scenario. The mean shell lengths of larvae were significantly decreased in the high and extremely high pCO2 groups compared with the ambient control groups. Furthermore, under high and extremely high pCO2 conditions, the cultures exhibited significantly increased abundances of abnormal larvae and increased severity of abnormalities compared with the ambient control. In the umbonate veliger stage of the experimental larvae, the most common abnormalities were shell deformations, distortions, and fissures; on the other hand, convex hinges and mantle protuberances were absent. These results suggest that elevated CO2 exerts an additional burden on the health of M. veneriformis larvae by impairing early development.

Influence of the invasive Asian clam Corbicula fluminea (Bivalvia: Corbiculidae) on estuarine epibenthic assemblages

Science.gov (United States)

Ilarri, M. I.; Souza, A. T.; Antunes, C.; Guilhermino, L.; Sousa, R.

2014-04-01

One of the most widespread invasive alien species (IAS) in aquatic ecosystems is the Asian clam Corbicula fluminea. Several studies have shown that C. fluminea can cause large-scale changes in macrozoobenthic assemblages; however, very few attempted to investigate the effects of this IAS on mobile epibenthic species, such as fishes and crustaceans. In this context, the influence of C. fluminea on epibenthic species was investigated during one year by comparing the associated epibenthic fauna in three nearby sites of the Minho estuary (NW of the Iberian Peninsula), wherein the abiotic conditions are similar but the density of the Asian clam is highly different. From a total of 13 species, six were significantly influenced by C. fluminea; five responded positively, namely the brown shrimp Crangon crangon, the European eel Anguilla anguilla, the common goby Pomatoschistus microps, the brown trout Salmo trutta fario and the great pipefish Syngnathus acus, whereas the shore crab Carcinus maenas was negatively influenced. However, stomach contents analysis revealed that fish and crustacean species do not feed on C. fluminea, suggesting that this IAS is still not a large component of the diet of higher trophic levels in this estuarine ecosystem. Our results suggest that the structure provided by C. fluminea shells is likely to be one of the main factors responsible for the differences observed. C. fluminea physical structure seems to influence the epibenthic associated fauna, when found in densities higher than 1000 ind./m2, with sedentary small-bodied crustaceans and fishes being mainly attracted by the increasing in habitat complexity and consequent enhancement of heterogeneity and shelter availability.

Co-electrodeposition of hard Ni-W/diamond nanocomposite coatings

Science.gov (United States)

Zhang, Xinyu; Qin, Jiaqian; Das, Malay Kumar; Hao, Ruru; Zhong, Hua; Thueploy, Adisak; Limpanart, Sarintorn; Boonyongmaneerat, Yuttanant; Ma, Mingzhen; Liu, Riping

2016-02-01

Electroplated hard chrome coating is widely used as a wear resistant coating to prolong the life of mechanical components. However, the electroplating process generates hexavalent chromium ion which is known carcinogen. Hence, there is a major effort throughout the electroplating industry to replace hard chrome coating. Composite coating has been identified as suitable materials for replacement of hard chrome coating, while deposition coating prepared using traditional co-deposition techniques have relatively low particles content, but the content of particles incorporated into a coating may fundamentally affect its properties. In the present work, Ni-W/diamond composite coatings were prepared by sediment co-electrodeposition from Ni-W plating bath, containing suspended diamond particles. This study indicates that higher diamond contents could be successfully co-deposited and uniformly distributed in the Ni-W alloy matrix. The maximum hardness of Ni-W/diamond composite coatings is found to be 2249 ± 23 Hv due to the highest diamond content of 64 wt.%. The hardness could be further enhanced up to 2647 ± 25 Hv with heat treatment at 873 K for 1 h in Ar gas, which is comparable to hard chrome coatings. Moreover, the addition of diamond particles could significantly enhance the wear resistance of the coatings.

The Effect of Season on the Metabolic Profile of the European Clam Ruditapes decussatus as Studied by 1H-NMR Spectroscopy

Directory of Open Access Journals (Sweden)

Violetta Aru

2017-07-01

Full Text Available In this study, the metabolome of Ruditapes decussatus, an economically and ecologically important marine bivalve species widely distributed in the Mediterranean region, was characterized by using proton Nuclear Magnetic Resonance (1H-NMR spectroscopy. Significant seasonal variations in the content of carbohydrates and free amino acids were observed. The relative amounts of alanine and glycine were found to exhibit the same seasonal pattern as the temperature and salinity at the harvesting site. Several putative sex-specific biomarkers were also discovered. Substantial differences were found for alanine and glycine, whose relative amounts were higher in males, while acetoacetate, choline and phosphocholine were more abundant in female clams. These findings reveal novel insights into the baseline metabolism of the European clam and represent a step forward towards a comprehensive metabolic characterization of the species. Besides providing a holistic view on the prominent nutritional components, the characterization of the metabolome of this bivalve represents an important prerequisite for elucidating the underlying metabolic pathways behind the environment-organism interactions.

The Roles of Ideological State Apparatus in Maintaining Hegemony in Charles Dicken's Hard Times

OpenAIRE

Prasetya, Farid Adi

2013-01-01

One of literary works, a novel, may be reflects social phenomenon. The correlation between literary works and social phenomenon includes an analysis towards a novel entitled Hard Times by Charles Dickens, which covers a social phenomenon. The overall image of Hard Times is a society of industrial city namely Coketown, which has unequal economic condition. Through characters that appear in the novel, it can be analyzed, Hard Times reflects social clashes that are triggered by economic conditio...

ALAM/CLAM and some applications of computer algebra systems to problems in general relativity

International Nuclear Information System (INIS)

Russell-Clark, R.A.

1973-01-01

This paper is divided into three parts. Part A presents a historical survey of the development of the system, a brief description of its features and, finally, a critical assessment. ALAM and CLAM have been used in many problems in General Relativity; the vast majority of these belong to a set of standard calculations termed ''metric applications''. However, four large non-standard applications have been attempted successfully and these are described in Part B. CAMAL is the only other system which has been used extensively for work in relativity. CAMAL has played an important role in two research projects and details of these are given in Part C

Expression of cyp1a protein in the freshwater clam Corbicula fluminea (Müller

Directory of Open Access Journals (Sweden)

Vranković Jelena

2011-01-01

Full Text Available We investigated the expression of CYP1A in the foot, gill and visceral mass of the freshwater clam Corbicula fluminea in relation to polychlorinated biphenyls (PCBs exposure. Different PCBs congeners were found in the foot and visceral mass, while the expression of CYP1A was observed only in the visceral mass. However the level of CYP1A expression in the visceral mass was not related to the level of PCBs present in the tissue. Our results indicate a higher rate of biotransformation and lower threshold of CYP1A induction in the visceral mass compared with other tissues.

Genetic diversity of giant clams (Tridacna spp.) and their associated Symbiodinium in the central Red Sea

KAUST Repository

Pappas, Melissa

2017-05-19

The biodiversity of the Red Sea remains relatively understudied, particularly for invertebrate taxa. Documenting present patterns of biodiversity is essential for better understanding Red Sea reef ecosystems and how these ecosystems may be impacted by stressors (such as fishing and climate change). Several species of giant clams (genus Tridacna) are reported from the Red Sea, although the majority of research effort has occurred in the Gulf of Aqaba. We investigated the genetic diversity (16S rDNA) of the Tridacna species found in the central Saudi Arabian Red Sea. We also investigated the genetic diversity (ITS rDNA) of symbiotic dinoflagellates Symbiodinium associated with these clams. Samples were collected from nine reefs on a cross-shelf gradient near Thuwal, Saudi Arabia. Two species, T. squamosa and T. maxima, were recorded, with the latter being the most abundant. Tridacna squamosina, a species recently reported in the northern Red Sea, was not found, suggesting that this species is not present or is very rare in our study region. All tridacnids sampled were found to harbor Symbiodinium grouped in Clade A, considered an opportunistic, heat-tolerant symbiont group in anemones and corals. The consistent association with Clade A Symbiodinium in central Red Sea tridacnids may reflect the consequence of adaptation to the relatively extreme conditions of the Red Sea. This study contributes to an ever-growing catalog of Red Sea biodiversity and serves as important baseline information for a region experiencing dynamic pressures.

Genetic diversity of giant clams (Tridacna spp.) and their associated Symbiodinium in the central Red Sea

KAUST Repository

Pappas, Melissa; He, Song; Hardenstine, Royale; Kanee, Hana; Berumen, Michael L.

2017-01-01

The biodiversity of the Red Sea remains relatively understudied, particularly for invertebrate taxa. Documenting present patterns of biodiversity is essential for better understanding Red Sea reef ecosystems and how these ecosystems may be impacted by stressors (such as fishing and climate change). Several species of giant clams (genus Tridacna) are reported from the Red Sea, although the majority of research effort has occurred in the Gulf of Aqaba. We investigated the genetic diversity (16S rDNA) of the Tridacna species found in the central Saudi Arabian Red Sea. We also investigated the genetic diversity (ITS rDNA) of symbiotic dinoflagellates Symbiodinium associated with these clams. Samples were collected from nine reefs on a cross-shelf gradient near Thuwal, Saudi Arabia. Two species, T. squamosa and T. maxima, were recorded, with the latter being the most abundant. Tridacna squamosina, a species recently reported in the northern Red Sea, was not found, suggesting that this species is not present or is very rare in our study region. All tridacnids sampled were found to harbor Symbiodinium grouped in Clade A, considered an opportunistic, heat-tolerant symbiont group in anemones and corals. The consistent association with Clade A Symbiodinium in central Red Sea tridacnids may reflect the consequence of adaptation to the relatively extreme conditions of the Red Sea. This study contributes to an ever-growing catalog of Red Sea biodiversity and serves as important baseline information for a region experiencing dynamic pressures.

Three vibrio-resistance related EST-SSR markers revealed by selective genotyping in the clam Meretrix meretrix.

Science.gov (United States)

Nie, Qing; Yue, Xin; Chai, Xueliang; Wang, Hongxia; Liu, Baozhong

2013-08-01

The clam Meretrix meretrix is an important commercial bivalve distributed in the coastal areas of South and Southeast Asia. In this study, marker-trait association analyses were performed based on the stock materials of M. meretrix with different vibrio-resistance profile obtained by selective breeding. Forty-eight EST-SSR markers were screened and 27 polymorphic SSRs of them were genotyped in the clam stocks with different resistance to Vibrio parahaemolyticus (11-R and 11-S) and to Vibrio harveyi (09-R and 09-C). Allele frequency distributions of the SSRs among different stocks were compared using Pearson's Chi-square test, and three functional EST-SSR markers (MM959, MM4765 and MM8364) were found to be associated with vibrio-resistance trait. The 140-bp allele of MM959 and 128-bp allele of MM4765 had significantly higher frequencies in resistant groups (11-R and 09-R) than in susceptive/control groups (11-S and 09-C) (P SSR markers were consistent with the three subgroups distinctions. The putative functions of contig959, contig4765 and contig8364 also suggested that the three SSR-involved genes might play important roles in immunity of M. meretrix. All these results supported that EST-SSR markers MM959, MM4765 and MM8364 were associated with vibrio-resistance and would be useful for marker-assisted selection (MAS) in M. meretrix genetic breeding. Copyright © 2013 Elsevier Ltd. All rights reserved.

Industrial garnet

Science.gov (United States)

Olson, D.W.

2013-01-01

Garnet has been used as a gemstone since the Bronze Age. However, garnet’s angular fractures, relatively high hardness and specific gravity, chemical inertness and nontoxicity make it ideal for many industrial applications. It is also free of crystalline silica and can be recycled.

Clam wave energy converter. Report for period July 1979 to December 1980

Energy Technology Data Exchange (ETDEWEB)

1981-02-01

Work by the Sea Energy Asociates Ltd - Lanchester Polytechnic Wave Energy Group on the Clam device since the April 1979 feasibility study has shown it to be a well developed and viable device capable of extracting energy economically from sea waves. The experience of the team includes mooring, structural and device tests from 1/100th to 1/10th scale in narrow and wide tanks, Draycote Reservoir and on Loch Ness. Theoretical and semi-empirical modelling has become increasingly important. Recently a test rig to assess a 1/10th scale power take off system, based on a Wells turbine, has been completed. The philosophy of the project team has been to aim for a device as simple as possible, with a small number of moving parts in order to minimise maintenance problems.

Development of the 'SEA-Clam' wave energy device for small scale use. Interim report 1st August 1983 - 30th April 1984

Energy Technology Data Exchange (ETDEWEB)

1984-04-01

An Interim Report on the development of the Sea-Clam wave energy device for small scale use is presented. Experimental tests to measure the productivity of the Clam system, using 1/14th linear scale models of a 80 m long x 7 to 9 m deep x 5 m wide device intended for small community use are outlined. A feature of these experiments has been the development of a rotating damper which enables damping rate to be readily varied during a series of successive tests, a major advance in power measurements of air systems at this scale. Development of corded bags, progress made during the period with mathematical modelling of the turbine-generator power take-off system, and use of paralleled induction generators run at near-synchronous speed in conjuction with either a 3-phase base supply or an on-board alternator to provide magnetization current are discussed.

Revisiting the definition of local hardness and hardness kernel.

Science.gov (United States)

Polanco-Ramírez, Carlos A; Franco-Pérez, Marco; Carmona-Espíndola, Javier; Gázquez, José L; Ayers, Paul W

2017-05-17

An analysis of the hardness kernel and local hardness is performed to propose new definitions for these quantities that follow a similar pattern to the one that characterizes the quantities associated with softness, that is, we have derived new definitions for which the integral of the hardness kernel over the whole space of one of the variables leads to local hardness, and the integral of local hardness over the whole space leads to global hardness. A basic aspect of the present approach is that global hardness keeps its identity as the second derivative of energy with respect to the number of electrons. Local hardness thus obtained depends on the first and second derivatives of energy and electron density with respect to the number of electrons. When these derivatives are approximated by a smooth quadratic interpolation of energy, the expression for local hardness reduces to the one intuitively proposed by Meneses, Tiznado, Contreras and Fuentealba. However, when one combines the first directional derivatives with smooth second derivatives one finds additional terms that allow one to differentiate local hardness for electrophilic attack from the one for nucleophilic attack. Numerical results related to electrophilic attacks on substituted pyridines, substituted benzenes and substituted ethenes are presented to show the overall performance of the new definition.

A hard-knock life: the foraging ecology of Cape cormorants amidst ...

African Journals Online (AJOL)

A hard-knock life: the foraging ecology of Cape cormorants amidst shifting prey resources and industrial fishing pressure. MH Hamann, D Grémillet, PG Ryan, F Bonadonna, CD van der Lingen, L Pichegru ...

Hard X-ray dosimetry of a plasma focus suitable for industrial radiography

Science.gov (United States)

Knoblauch, P.; Raspa, V.; Di Lorenzo, F.; Clausse, A.; Moreno, C.

2018-04-01

Dosimetric measurements of the hard X-ray emission by a small-chamber 4.7 kJ Mather-type plasma focus device capable of producing neat radiographs of metallic objects, were carried out with a set of thermoluminescent detectors TLD 700 (LiF:Mg,Ti). Measurements of the hard X-ray dose dependence with the angular position relative to the electrodes axis, are presented. The source-detector distance was changed in the range from 50 to 100 cm, and the angular positions were explored between ± 70°, relative to the symmetry axis of the electrodes. On-axis measurements show that the X-ray intensity is uniform within a half aperture angle of 6°, in which the source delivers an average dose of (1.5 ± 0.1) mGy/sr per shot. Monte Carlo calculations suggest that the energy of the electron beam responsible for the X-ray emission ranges 100-600 keV.

Water Hardness Level and ItAND#8217;s Health Effects

Directory of Open Access Journals (Sweden)

Necmettin Kocak

2011-04-01

Full Text Available Water hardness is a term used to define the number of ions contained in the water, especially quantity sulphate, carbonate salts of calcium and magnesium. This characteristis of water is a important quality in it’s use as drinking water, industrial water and service water. The temporary hardness level of water cames from bicarbonate salts of calcium and magnesium whereas chloride, sulphate, nitrate, phosphate, silicate salts of calcium and magnesium. In order to indicate the hardness level of water samples French Hardness Level is used in our country. There is a larger amounth of calcium and magnesium salts in hard water samples. These minerals have very important functions in the human body. In this study, the importance of hard water in terms of human health has been assessed under light of current information. The studies about the preventive role of hard water in cardiovascular diseases, cerebrovascular diseases, stroke and many types of cancer areviewed. These studies Express that higher levels of calcium and magnesium hard water provide a higher reduction in these disease. Water, which must be consumed as 2 liters per dayis very important for human life. Hard water contains a lot of the minerals that must be taker daily, especially calcium and magnesium. It’s advised that water for consumption to have medium hardness. The hardness level of water is an aesthetic quality. Thus, in populations having a taste for soft water, the effort of individuals to softer the network water provided by municipalities using different equipments, in addition to their preference of soft water in plastic or glass bottles for consumption could imply lack of benefit of hard water for population health and also bring out some risks in terms of water hygiene. [TAF Prev Med Bull 2011; 10(2.000: 187-192

The Manila clam population in Arcachon Bay (SW France): Can it be kept sustainable?

Science.gov (United States)

Dang, Cécile; de Montaudouin, Xavier; Gam, Mériame; Paroissin, Christian; Bru, Noëlle; Caill-Milly, Nathalie

2010-02-01

The venerid clam Ruditapes philippinarum is the most prominent suspension-feeding bivalve inhabiting muddy intertidal seagrass beds in Arcachon Bay (SW France). It is exploited by fishermen, and Arcachon Bay ranks number one in France in terms of production and total biomass of this species. Previous studies revealed a decrease in the standing stock of R. philippinarum since 2003 and unbalanced length-frequency distributions with a lack of juveniles and of adults > 40 mm. Consequently, the population dynamics of this bivalve were studied at four intertidal sites and one oceanic site in Arcachon Bay. As clam size structure did not allow classical dynamics computations, field monitoring was coupled with field experiments (tagging-recapture) over two years. Monitoring of condition index and gonadal maturation stages highlighted a high variability in spawning number and intensity between sites. Recruitment events in the exploited area varied spatially but with uniformly low values. Von Bertalanffy Growth Function (VBGF) parameters ( K, L∞) were determined using Appeldoorn and ELEFAN methods. In the exploited sites in the inner lagoon, K was relatively high (mean = 0.72 yr - 1 ) but L∞ was low (mean = 41.1 mm) resulting in a moderate growth performance index (Φ' = 2.99). Growth parameters were not correlated with immersion time and L∞ was different between sites. Comparison of mortality coefficients ( Z) between cage experiments and field monitoring suggested that fishing accounts for 65-75% of total adult mortality. Low recruitment, a low growth rate and a normal mortality rate led to low somatic production (4.1 and 8.7 g Shell-Free Dry Weight (SFDW) m - 2 yr - 1 ) and an annual P/ B ratio from 0.44 to 0.92 yr - 1 . Under current conditions, the possibility of a sustainable population in Arcachon Bay will strongly depend on recruitment success and fishing management.

Paralytic shellfish toxins in the chocolata clam, Megapitaria squalida (Bivalvia: Veneridae, in Bahía de La Paz, Gulf of California

Directory of Open Access Journals (Sweden)

I Gárate-Lizárraga

2004-09-01

Full Text Available Occurrence and toxic profiles of paralytic shellfish toxins (PST in the chocolata clam Megapitaria squalida were investigated. From December 2001 to December 2002, 25 clams were obtained monthly from Bahía de La Paz, Gulf of California. Additionally, net (20 µm and bottle phytoplankton samples were also collected to identify toxic species. Toxins were analyzed by HPLC with post-column oxidation and fluorescence detection. Toxicity in the clam was low and varied from 0.14 to 5.46 µg/STXeq/100 g. Toxicity was detected in December, March, April, June, and August. Toxin profile was composed mainly by STX, GTX2, GTX3, dcGTX2, dcGTX3, C2, dcSTX and B1. Gymnodinium catenatum was the only PST-producing dinoflagellate identified in the phytoplankton samples throughout the study period. G. catenatum was observed mainly in net samples from December 2001 to December 2002; however, in bottle samples, G. catenatum was only observed in five months. Highest abundance (2 600 cells l-1 was observed in March and the lowest (160 cells l-1 in June. G. catenatum mainly formed two-cell chains and rarely four or eight. The presence of PST in net phytoplankton samples support the fact that G. catenatum is the main source of PST in the clams. This study represents the first report of PST toxins in the chocolata clam from Bahía de La PazSe investigó la ocurrencia así como los perfiles de toxinas paralíticas (PST en la almeja chocolata Megapitaria squalida (Sowerby, 1835, de la cual se recolectaron mensualmente 25 ejemplares de diciembre del 2001 a diciembre del 2000 en La Bahía de La Paz, Golfo de California. Simultáneamente, se obtuvieron muestras de fitoplancton de botella y de red (20 µM para identificar especies tóxicas, así como para detectar la presencia de toxinas paralíticas. Las toxinas se analizaron por HPLC con una oxidación post-columna y detección fluorescente. La toxicidad en las almejas fue baja y varió de 0.14 a 5.46 µg/STXeq/100 g y se

Comparative genomics of vesicomyid clam (Bivalvia: Mollusca chemosynthetic symbionts

Directory of Open Access Journals (Sweden)

Girguis Peter R

2008-12-01

Full Text Available Abstract Background The Vesicomyidae (Bivalvia: Mollusca are a family of clams that form symbioses with chemosynthetic gamma-proteobacteria. They exist in environments such as hydrothermal vents and cold seeps and have a reduced gut and feeding groove, indicating a large dependence on their endosymbionts for nutrition. Recently, two vesicomyid symbiont genomes were sequenced, illuminating the possible nutritional contributions of the symbiont to the host and making genome-wide evolutionary analyses possible. Results To examine the genomic evolution of the vesicomyid symbionts, a comparative genomics framework, including the existing genomic data combined with heterologous microarray hybridization results, was used to analyze conserved gene content in four vesicomyid symbiont genomes. These four symbionts were chosen to include a broad phylogenetic sampling of the vesicomyid symbionts and represent distinct chemosynthetic environments: cold seeps and hydrothermal vents. Conclusion The results of this comparative genomics analysis emphasize the importance of the symbionts' chemoautotrophic metabolism within their hosts. The fact that these symbionts appear to be metabolically capable autotrophs underscores the extent to which the host depends on them for nutrition and reveals the key to invertebrate colonization of these challenging environments.

50 CFR 648.77 - Framework adjustments to management measures.

Science.gov (United States)

2010-10-01

... Management Measures for the Atlantic Surf Clam and Ocean Quahog Fisheries § 648.77 Framework adjustments to... add or adjust management measures within the Atlantic Surf Clam and Ocean Quahog FMP if it finds that... stratification, reports, and/or industry-funded observers or observer set-aside programs). (2) Council...

In vitro exposure of haemocytes of the clam Ruditapes philippinarum to titanium dioxide (TiO2) nanoparticles: nanoparticle characterisation, effects on phagocytic activity and internalisation of nanoparticles into haemocytes.

Science.gov (United States)

Marisa, Ilaria; Marin, Maria Gabriella; Caicci, Federico; Franceschinis, Erica; Martucci, Alessandro; Matozzo, Valerio

2015-02-01

The continuous growth of nanotechnology and nano-industries, the considerable increase of products containing nanoparticles (NPs) and the potential release of NPs in aquatic environments suggest a need to study NP effects on aquatic organisms. In this context, in vitro assays are commonly used for evaluating or predicting the negative effects of chemicals and for understanding their mechanisms of action. In this study, a physico-chemical characterisation of titanium dioxide NPs (n-TiO2) was performed, and an in vitro approach was used to investigate the effects of n-TiO2 on haemocytes of the clam Ruditapes philippinarum. In particular, the effects on haemocyte phagocytic activity were evaluated in two different experiments (with and without pre-treatment of haemocytes) by exposing cells to P25 n-TiO2 (0, 1 and 10 μg/mL). In addition, the capability of n-TiO2 to interact with clam haemocytes was evaluated with a transmission electron microscope (TEM). In this study, n-TiO2 particles showed a mean diameter of approximately 21 nm, and both anatase (70%) and rutile (30%) phases were revealed. In both experiments, n-TiO2 significantly decreased the phagocytic index compared with the control, suggesting that NPs are able to interfere with cell functions. The results of the TEM analysis support this hypothesis. Indeed, we observed that TiO2 NPs interact with cell membranes and enter haemocyte cytoplasm and vacuoles after 60 min of exposure. To the best of our knowledge, this is the first study demonstrating the internalisation of TiO2 NPs into R. philippinarum haemocytes. The present study can contribute to the understanding of the mechanisms of action of TiO2 NPs in bivalve molluscs, at least at the haemocyte level. Copyright © 2014 Elsevier Ltd. All rights reserved.

Research Update: Hard carbon with closed pores from pectin-free apple pomace waste for Na-ion batteries

Science.gov (United States)

Dou, Xinwei; Geng, Chenxi; Buchholz, Daniel; Passerini, Stefano

2018-04-01

Herein, we report a hard carbon derived from industrial bio-waste, i.e., pectin-free apple pomace. The structural, morphological, and electrochemical properties of the hard carbon are reported. The impact of the bio-waste on the closed porosity is discussed, providing valuable insights into the sodium storage mechanism in hard carbons. Most importantly, the hard carbon delivers good electrochemical performance, high specific capacities of 285 mAh g-1, and a very good capacity retention of 96% after 230 cycles at 0.1 C.

The Whitish Inner Mantle of the Giant Clam, Tridacna squamosa, Expresses an Apical Plasma Membrane Ca2+-ATPase (PMCA Which Displays Light-Dependent Gene and Protein Expressions

Directory of Open Access Journals (Sweden)

Yuen K. Ip

2017-10-01

Full Text Available Giant clams live in symbiosis with extracellular zooxanthellae and display high rates of growth and shell formation (calcification in light. Light-enhanced calcification requires an increase in the supply of Ca2+ to, and simultaneously an augmented removal of H+ from, the extrapallial fluid where shell formation occurs. We have obtained the complete coding cDNA sequence of Plasma Membrane Ca2+-ATPase (PMCA from the thin and whitish inner mantle, which is in touch with the extrapallial fluid, of the giant clam Tridacna squamosa. The deduced PMCA sequence consisted of an apical targeting element. Immunofluorescence microscopy confirmed that PMCA had an apical localization in the shell-facing epithelium of the inner mantle, whereby it can actively secrete Ca2+ in exchange for H+. More importantly, the apical PMCA-immunofluorescence of the shell-facing epithelium of the inner mantle increased significantly after 12 h of exposure to light. The transcript and protein levels of PMCA/PMCA also increased significantly in the inner mantle after 6 or 12 h of light exposure. These results offer insights into a light-dependable mechanism of shell formation in T. squamosa and a novel explanation of light-enhanced calcification in general. As the inner mantle normally lacks light sensitive pigments, our results support a previous proposition that symbiotic zooxanthellae, particularly those in the colorful and extensible outer mantle, may act as light-sensing elements for the host clam.

Distribution of organotin compounds in the bivalves of the Aegean Sea, Greece

NARCIS (Netherlands)

Chandrinou, S.; Pappas, K.; Nikolaou, A.; Stasinakis, A.S.; Wegener, J.W.M.; Alexandropoulos, Th.; Thomaidis, N.S.

2007-01-01

Five bivalve species - Mytilus galloprovinciallis (Mediterranean mussels), Venus gallina (stripped venus), Modiola barbatus L. (bearded horse mussels), Pecten jacobeus (scallops) and Callista chione (hard clams) - were collected from seven areas in Aegean Sea, Greece, between August 2001 and January

Hard-tip, soft-spring lithography.

Science.gov (United States)

Shim, Wooyoung; Braunschweig, Adam B; Liao, Xing; Chai, Jinan; Lim, Jong Kuk; Zheng, Gengfeng; Mirkin, Chad A

2011-01-27

Nanofabrication strategies are becoming increasingly expensive and equipment-intensive, and consequently less accessible to researchers. As an alternative, scanning probe lithography has become a popular means of preparing nanoscale structures, in part owing to its relatively low cost and high resolution, and a registration accuracy that exceeds most existing technologies. However, increasing the throughput of cantilever-based scanning probe systems while maintaining their resolution and registration advantages has from the outset been a significant challenge. Even with impressive recent advances in cantilever array design, such arrays tend to be highly specialized for a given application, expensive, and often difficult to implement. It is therefore difficult to imagine commercially viable production methods based on scanning probe systems that rely on conventional cantilevers. Here we describe a low-cost and scalable cantilever-free tip-based nanopatterning method that uses an array of hard silicon tips mounted onto an elastomeric backing. This method-which we term hard-tip, soft-spring lithography-overcomes the throughput problems of cantilever-based scanning probe systems and the resolution limits imposed by the use of elastomeric stamps and tips: it is capable of delivering materials or energy to a surface to create arbitrary patterns of features with sub-50-nm resolution over centimetre-scale areas. We argue that hard-tip, soft-spring lithography is a versatile nanolithography strategy that should be widely adopted by academic and industrial researchers for rapid prototyping applications.

Radiation hardness qualification of PbWO4 scintillation crystals for the CMS Electromagnetic Calorimeter

CERN Document Server

Adzic, P.; Andelin, D.; Anicin, I.; Antunovic, Z.; Arcidiacono, R.; Arenton, M.W.; Auffray, E.; Argiro, S.; Askew, A.; Baccaro, S.; Baffioni, S.; Balazs, M.; Bandurin, D.; Barney, D.; Barone, L.M.; Bartoloni, A.; Baty, C.; Beauceron, S.; Bell, K.W.; Bernet, C.; Besancon, M.; Betev, B.; Beuselinck, R.; Biino, C.; Blaha, J.; Bloch, P.; Borisevitch, A.; Bornheim, A.; Bourotte, J.; Brown, R.M.; Buehler, M.; Busson, P.; Camanzi, B.; Camporesi, T.; Cartiglia, N.; Cavallari, F.; Cecilia, A.; Chang, P.; Chang, Y.H.; Charlot, C.; Chen, E.A.; Chen, W.T.; Chen, Z.; Chipaux, R.; Choudhary, B.C.; Choudhury, R.K.; Cockerill, D.J.A.; Conetti, S.; Cooper, S.I.; Cossutti, F.; Cox, B.; Cussans, D.G.; Dafinei, I.; Da Silva Di Calafiori, D.R.; Daskalakis, G.; David, A.; Deiters, K.; Dejardin, M.; De Benedetti, A.; Della Ricca, G.; Del Re, D.; Denegri, D.; Depasse, P.; Descamps, J.; Diemoz, M.; Di Marco, E.; Dissertori, G.; Dittmar, M.; Djambazov, L.; Djordjevic, M.; Dobrzynski, L.; Dolgopolov, A.; Drndarevic, S.; Drobychev, G.; Dutta, D.; Dzelalija, M.; Elliott-Peisert, A.; El Mamouni, H.; Evangelou, I.; Fabbro, B.; Faure, J.L.; Fay, J.; Fedorov, A.; Ferri, F.; Franci, D.; Franzoni, G.; Freudenreich, K.; Funk, W.; Ganjour, S.; Gascon, S.; Gataullin, M.; Gentit, F.X.; Ghezzi, A.; Givernaud, A.; Gninenko, S.; Go, A.; Gobbo, B.; Godinovic, N.; Golubev, N.; Govoni, P.; Grant, N.; Gras, P.; Haguenauer, M.; Hamel de Monchenault, G.; Hansen, M.; Haupt, J.; Heath, H.F.; Heltsley, B.; Cornell U., LNS.; Hintz, W.; Hirosky, R.; Hobson, P.R.; Honma, A.; Hou, G.W.S.; Hsiung, Y.; Huhtinen, M.; Ille, B.; Ingram, Q.; Inyakin, A.; Jarry, P.; Jessop, C.; Jovanovic, D.; Kaadze, K.; Kachanov, V.; Kailas, S.; Kataria, S.K.; Kennedy, B.W.; Kokkas, P.; Kolberg, T.; Korjik, M.; Krasnikov, N.; Krpic, D.; Kubota, Y.; Kuo, C.M.; Kyberd, P.; Kyriakis, A.; Lebeau, M.; Lecomte, P.; Lecoq, P.; Ledovskoy, A.; Lethuillier, M.; Lin, S.W.; Lin, W.; Litvine, V.; Locci, E.; Longo, E.; Loukas, D.; Luckey, P.D.; Lustermann, W.; Ma, Y.; Malberti, M.; Malcles, J.; Maletic, D.; Manthos, N.; Maravin, Y.; Marchica, C.; Marinelli, N.; Markou, A.; Markou, C.; Marone, M.; Matveev, V.; Mavrommatis, C.; Meridiani, P.; Milenovic, P.; Mine, P.; Missevitch, O.; Mohanty, A.K.; Moortgat, F.; Musella, P.; Musienko, Y.; Nardulli, A.; Nash, J.; Nedelec, P.; Negri, P.; Newman, H.B.; Nikitenko, A.; Nessi-Tedaldi, F.; Obertino, M.M.; Organtini, G.; Orimoto, T.; Paganoni, M.; Paganini, P.; Palma, A.; Pant, L.; Papadakis, A.; Papadakis, I.; Papadopoulos, I.; Paramatti, R.; Parracho, P.; Pastrone, N.; Patterson, J.R.; Pauss, F.; Peigneux, J.P.; Petrakou, E.; Phillips, D.G.; Piroue, P.; Ptochos, F.; Puljak, I.; Pullia, A.; Punz, T.; Puzovic, J.; Ragazzi, S.; Rahatlou, S.; Rander, J.; Razis, P.A.; Redaelli, N.; Renker, D.; Reucroft, S.; Ribeiro, P.; Rogan, C.; Ronquest, M.; Rosowsky, A.; Rovelli, C.; Rumerio, P.; Rusack, R.; Rusakov, S.V.; Ryan, M.J.; Sala, L.; Salerno, R.; Schneegans, M.; Seez, C.; Sharp, P.; Shepherd-Themistocleous, C.H.; Shiu, J.G.; Shivpuri, R.K.; Shukla, P.; Siamitros, C.; Sillou, D.; Silva, J.; Silva, P.; Singovsky, A.; Sirois, Y.; Sirunyan, A.; Smith, V.J.; Stockli, F.; Swain, J.; Tabarelli de Fatis, T.; Takahashi, M.; Tancini, V.; Teller, O.; Theofilatos, K.; Thiebaux, C.; Timciuc, V.; Timlin, C.; Titov, Maxim P.; Topkar, A.; Triantis, F.A.; Troshin, S.; Tyurin, N.; Ueno, K.; Uzunian, A.; Varela, J.; Verrecchia, P.; Veverka, J.; Virdee, T.; Wang, M.; Wardrope, D.; Weber, M.; Weng, J.; Williams, J.H.; Yang, Y.; Yaselli, I.; Yohay, R.; Zabi, A.; Zelepoukine, S.; Zhang, J.; Zhang, L.Y.; Zhu, K.; Zhu, R.Y.

2010-01-01

Ensuring the radiation hardness of PbWO4 crystals was one of the main priorities during the construction of the electromagnetic calorimeter of the CMS experiment at CERN. The production on an industrial scale of radiation hard crystals and their certification over a period of several years represented a difficult challenge both for CMS and for the crystal suppliers. The present article reviews the related scientific and technological problems encountered.

Ni–Mo–Co ternary alloy as a replacement for hard chrome

Energy Technology Data Exchange (ETDEWEB)

Srivastava, Meenu, E-mail: meenu_srivas@yahoo.co.uk; Anandan, C.; Grips, V.K. William

2013-11-15

Hard chrome is the most extensively used electroplated coating in the aerospace and automotive industries due to its attractive properties such as high hardness and excellent wear resistance. However, due to the health risks associated with the use of hexavalent chromium baths during electroplating, there is a need to identify an alternative to this coating. In this study a nickel–molybdenum alloy with cobalt as the alloying element has been developed. The coating was characterized for its micro hardness, wear resistance, coefficient of friction and corrosion resistance. The coating was also subjected to heat treatment at temperatures in the range of 200°–600 °C. It was observed that the micro hardness of Ni–Mo–Co (730 KHN) alloy coating under optimized conditions is apparently quiet similar to that of the most probable substitute Co–P (745 VHN) and hard chrome (800 VHN) coatings. The tribological properties like the wear rate and coefficient of friction of the 400 °C heat treated Ni–Mo–Co coating were noticed to be better compared to hard chrome coating. The electrochemical impedance and polarization studies showed that the corrosion resistance of heat treated Ni–Mo–Co alloy was better than as-deposited Ni–Mo–Co and Ni–Mo coating.

Ni–Mo–Co ternary alloy as a replacement for hard chrome

International Nuclear Information System (INIS)

Srivastava, Meenu; Anandan, C.; Grips, V.K. William

2013-01-01

Hard chrome is the most extensively used electroplated coating in the aerospace and automotive industries due to its attractive properties such as high hardness and excellent wear resistance. However, due to the health risks associated with the use of hexavalent chromium baths during electroplating, there is a need to identify an alternative to this coating. In this study a nickel–molybdenum alloy with cobalt as the alloying element has been developed. The coating was characterized for its micro hardness, wear resistance, coefficient of friction and corrosion resistance. The coating was also subjected to heat treatment at temperatures in the range of 200°–600 °C. It was observed that the micro hardness of Ni–Mo–Co (730 KHN) alloy coating under optimized conditions is apparently quiet similar to that of the most probable substitute Co–P (745 VHN) and hard chrome (800 VHN) coatings. The tribological properties like the wear rate and coefficient of friction of the 400 °C heat treated Ni–Mo–Co coating were noticed to be better compared to hard chrome coating. The electrochemical impedance and polarization studies showed that the corrosion resistance of heat treated Ni–Mo–Co alloy was better than as-deposited Ni–Mo–Co and Ni–Mo coating.

Radiation effects and hardness of semiconductor electronic devices for nuclear industry

International Nuclear Information System (INIS)

Payat, R.; Friant, A.

1988-01-01

After a brief review of industrial and nuclear specificity and radiation effects in electronics components (semiconductors) the need for a specific test methodology of semiconductor devices is emphasized. Some studies appropriate for nuclear industry at D. LETI/DEIN/CEN-SACLAY are related [fr

Use of antioxidant enzymes of clam Ruditapes philippinarum as biomarker to polycyclic aromatic hydrocarbon pollution

Science.gov (United States)

Zhu, Lin; Tang, Xuexi; Wang, Ying; Sui, Yadong; Xiao, Hui

2016-03-01

The typical organic pollutant polycyclic aromatic hydrocarbon (PAH) anthracene was selected as a contaminant to investigate its effects on the activities of superoxide dismutase (SOD), catalase (CAT) and glutathione peroxidase (GSH-Px) in the clam Ruditapes philippinarum. The results show that SOD, CAT and GSH-Px had diff erent induction and inhibition reactions to anthracene stress, and that three diff erent organs in R. philippinarum (visceral mass, muscle tissue and mantle) had diff erent sensitivities to anthracene stress. This study suggest that SOD activities of the visceral mass, CAT activitities of the mantle and the visceral mass, and GSH-Px activity of the muscle tissue could be used as sensitive indicators of anthracene stress in R. philippinarum.

Recent development in the design of hard rock tunnel boring machines for the mining industry

International Nuclear Information System (INIS)

Snyder, L.L.; Williams, R.I.

1991-01-01

Underground development for nuclear waste storage will possibly require tunnels to be excavated in a variety of rock conditions and configurations. Recent innovations in Tunnel Boring Machine (TBM) design have allowed for an evolved style of TBM which has distinct advantages over the standard machines. Present day conventional hard rock TBM's were developed primarily for the long, relatively straight tunnels of the civil construction industry, thereby making them for the most part, unsuitable for the sharp curves, turnouts, declines, inclines and ramps required in many underground environments. The five foot to 36 foot (1.52 to 11 m) diameter machines are capable of boring tunnels with curve radiuses as small as 40 to 90 feet (12.2 to 27.5 m) depending on size. These short turning radiuses can be accomplished while gripping the tunnel walls horizontally in the traditional manner or vertically as required when intersecting existing tunnels, or making turnouts from the tunnel that the machine has just bored. The machine's length is approximately half of a traditional machine's length while still employing a full measure of thrust, horsepower and rock cutting ability. The machine's short length, combined with a patented machine structure allows it to steer while boring without causing harmful eccentric loads on the cutterhead and main bearing assembly. The machine configuration is versatile and can be easily modified to operate in a wide variety of conditions

Bio-accumulation of some trace metals in the short-neck clam Paphia malabarica from Mandovi estuary, Goa

Digital Repository Service at National Institute of Oceanography (India)

KrishnaKumari, L.; Kaisary, S.; Rodrigues, V.

distributed along the coast of Goa and forms an inexpensive and delicious seafood among recorded as Ag/g dry weight in the whole soft tissue was 3.8, 30.3, 13.5, estuary, Goa. Clams were categorised into two groups, 25–35 mm (small size) and 35–40 mm (big size.... Concentration factor was determined as a ratio of mean metal content (dissolved) in water (Ag/l) and that in the soft tissue (Ag/kg wet weight). All the analyses were carried out in duplicate, and the average values are reported in this paper. 3. Results...

Surface Roughness Analysis in the Hard Milling of JIS SKD61 Alloy Steel

Directory of Open Access Journals (Sweden)

Huu-That Nguyen

2016-06-01

Full Text Available Hard machining is an efficient solution that can be used to replace the grinding operation in the mold and die manufacturing industry. In this study, an attempt is made to analyze the effect of process parameters on workpiece surface roughness (Ra in the hard milling of JIS (Japanese Industrial Standard SKD61 steel, based on a combination of the Taguchi method and response surface methodology (RSM. The cutting parameters are selected based on the structural dynamic analysis of the machine tool. A set of experiments is designed according to the Taguchi technique. The average Ra is measured by a Mitutoyo Surftest SJ-400, and then analysis of variance (ANOVA is performed to determine the influences of cutting parameters on the given Ra. Quadratic mathematical modeling is introduced for prediction of the Ra during the hard milling process. The predicted values are in reasonable agreement with the observation of experiments. In an effort to obtain the minimizing Ra, a single objective optimization is employed based on the desirability function. The result shows that the percentage error between measured and predicted values of Ra is 3.2%, which is found to be insignificant. Eventually, the milled surface roughness under the optimized machining conditions is 0.122 µm. This finding shows that grinding may be replaced by finish hard milling in the mold and die manufacturing field.

A Mixed Analog-Digital Radiation Hard Technology for High Energy Physics Electronics: DMILL~(Durci~Mixte~sur~Isolant~Logico-Lineaire)

CERN Multimedia

Lugiez, F; Leray, J; Rouger, M; Fourches, N T; Musseau, O; Potheau, R

2002-01-01

%RD29 %title\\\\ \\\\Physics experiments under preparation with the future LHC require a fast, low noise, very rad-hard (>10 Mrad and >10$^{14}$ neutron/cm$^{2}$), mixed analog-digital microelectronics VLSI technology.\\\\ \\\\The DMILL microelectronics technology (RD29) was developed between 1990 and 1995 by a Consortium gathering the CEA and the firm Thomson-TCS, with the collaboration of IN2P3. The goal of the DMILL program, which is now completed, was to provide the High Energy Physics community, space industry, nuclear industry, and other applications, with an industrial very rad-hard mixed analog-digital microelectronics technology.\\\\ \\\\DMILL integrates mixed analog-digital very rad-hard (>10 Mrad and >10$^{14}$ neutron/cm$^{2}$) vertical bipolar, 0.8 $\\mu$m CMOS and 1.2 $\\mu$m PJFET transistors. Its SOI substrate and its dielectric trenches strongly reduce SEU sensitivity and completely eliminate any possibility of latch-up. Its four transistors are optimized to obtain low-noise features. DMILL also integrates...

An Experimental Investigation on Hardness and Microstructure of Heat Treated EN 9 Steel

Science.gov (United States)

Biswas, Palash; Kundu, Arnab; Mondal, Dhiraj

2017-08-01

In the modern engineering world, extensive research has led to the development of some special grades of steel, often suited for enhanced functions. EN 9 steel is one such grade, having major applications in power plants, automobile and aerospace industry. Different heat treatment processes are employed to achieve high hardness and high wear resistance, but machinability subsequently decreases. Existing literature is not sufficient to achieve a balance between hardness and machinability. The aim of this experimental work is to determine the hardness values and observe microstructural changes in EN9 steel, when it is subjected to annealing, normalizing and quenching. Finally, the effects of tempering after each of these heat treatments on hardness and microstructure have also been shown. It is seen that the tempering after normalizing the specimen achieved satisfactory results. The microstructure was also observed to be consisting of fine grains.

Commercialization of Ultra-Hard Ceramics for Cutting Tools Final Report CRADA No. TC0279.0

Energy Technology Data Exchange (ETDEWEB)

Landingham, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Neumann, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-08-15

This was a collaborative effort between Lawrence Livermore National Security, LLC as manager and operator of Lawrence Livermore National Laboratory (LLNL) and Greenleaf Corporation (Greenleaf) to develop the technology for forming unique precursor nano-powders process that can be consolidated into ceramic products for industry. LLNL researchers have developed a solgel process for forming nano-ceramic powders. The nano powders are highly tailorable, allowing the explicit design of desired properties that lead to ultra hard materials with fine grain size. The present CRADA would allow the two parties to continue the development of the sol-gel process and the consolidation process in order to develop an industrially sound process for the manufacture of these ultra-hard materials.

Relative hardness measurement of soft objects by a new fiber optic sensor

Science.gov (United States)

Ahmadi, Roozbeh; Ashtaputre, Pranav; Abou Ziki, Jana; Dargahi, Javad; Packirisamy, Muthukumaran

2010-06-01

The measurement of relative hardness of soft objects enables replication of human finger tactile perception capabilities. This ability has many applications not only in automation and robotics industry but also in many other areas such as aerospace and robotic surgery where a robotic tool interacts with a soft contact object. One of the practical examples of interaction between a solid robotic instrument and a soft contact object occurs during robotically-assisted minimally invasive surgery. Measuring the relative hardness of bio-tissue, while contacting the robotic instrument, helps the surgeons to perform this type of surgery more reliably. In the present work, a new optical sensor is proposed to measure the relative hardness of contact objects. In order to measure the hardness of a contact object, like a human finger, it is required to apply a small force/deformation to the object by a tactile sensor. Then, the applied force and resulting deformation should be recorded at certain points to enable the relative hardness measurement. In this work, force/deformation data for a contact object is recorded at certain points by the proposed optical sensor. Recorded data is used to measure the relative hardness of soft objects. Based on the proposed design, an experimental setup was developed and experimental tests were performed to measure the relative hardness of elastomeric materials. Experimental results verify the ability of the proposed optical sensor to measure the relative hardness of elastomeric samples.

Effect of magneto rheological damper on tool vibration during hard turning

Science.gov (United States)

Paul, P. Sam; Varadarajan, A. S.

2012-12-01

Recently, the concept of hard turning has gained considerable attention in metal cutting as it can apparently replace the traditional process cycle of turning, heat treating, and finish grinding for assembly of hard wear resistant steel parts. The present investigation aims at developing a magneto rheological (MR) fluid damper for suppressing tool vibration and promoting better cutting performance during hard turning. The magneto rheological Fluid acts as a viscoelastic spring with non-linear vibration characteristics that are controlled by the composition of the magneto rheological fluid, the shape of the plunger and the electric parameters of the magnetizing field. Cutting experiments were conducted to arrive at a set of electrical, compositional and shape parameters that can suppress tool vibration and promote better cutting performance during turning of AISI 4340 steel of 46 HRC with minimal fluid application using hard metal insert with sculptured rake face. It was observed that the use of MR fluid damper reduces tool vibration and improves the cutting performance effectively. Also commercialization of this idea holds promise to the metal cutting industry.

Economical solution for the industrial waste problem of Karachi industrial area

International Nuclear Information System (INIS)

Mubin, S.

2005-01-01

The increased rate of industrialization coupled with rapid urbanization in Pakistan has given rise to serious water pollution and environmental problems. A vast range of industries has been established in the country during the last twenty five years, including tanneries, fertilizers, textiles, refineries, chemicals, vegetable oils, paper am pulp, sugar and food. Little attention was paid towards a large scale release of wastewater from these industries. Presently wastewater produced from these industries has been considered a serious problem and research in being conducted to solve its associated problems. Recently, it has been realized that there is a significant threat of water borne diseases, degradation of fresh water quality, environmental depletion and soil deterioration from the effluent and toxic emission of industries. Being a developing country and having limited resources, it is hard to install treatment plants on the industrial effluent with every industry before discharging them into streams which are also creating disturbance in natural ecosystem. An effort has been made to solve wastewater problem by implementing statistical tools on data of Karachi industrial state, obtained from EPA JICA and PCRWR, Islamabad. (author)

Using Neural Networks to Predict the Hardness of Aluminum Alloys

Directory of Open Access Journals (Sweden)

B. Zahran

2015-02-01

Full Text Available Aluminum alloys have gained significant industrial importance being involved in many of the light and heavy industries and especially in aerospace engineering. The mechanical properties of aluminum alloys are defined by a number of principal microstructural features. Conventional mathematical models of these properties are sometimes very complex to be analytically calculated. In this paper, a neural network model is used to predict the correlations between the hardness of aluminum alloys in relation to certain alloying elements. A backpropagation neural network is trained using a thorough dataset. The impact of certain elements is documented and an optimum structure is proposed.

Consequences of an uncertain mass mortality regime triggered by climate variability on giant clam population management in the Pacific Ocean.

Science.gov (United States)

Van Wynsberge, Simon; Andréfouët, Serge; Gaertner-Mazouni, Nabila; Remoissenet, Georges

2018-02-01

Despite actions to manage sustainably tropical Pacific Ocean reef fisheries, managers have faced failures and frustrations because of unpredicted mass mortality events triggered by climate variability. The consequences of these events on the long-term population dynamics of living resources need to be better understood for better management decisions. Here, we use a giant clam (Tridacna maxima) spatially explicit population model to compare the efficiency of several management strategies under various scenarios of natural mortality, including mass mortality due to climatic anomalies. The model was parameterized by in situ estimations of growth and mortality and fishing effort, and was validated by historical and new in situ surveys of giant clam stocks in two French Polynesia lagoons. Projections on the long run (100 years) suggested that the best management strategy was a decrease of fishing pressure through quota implementation, regardless of the mortality regime considered. In contrast, increasing the minimum legal size of catch and closing areas to fishing were less efficient. When high mortality occurred due to climate variability, the efficiency of all management scenarios decreased markedly. Simulating El Niño Southern Oscillation event by adding temporal autocorrelation in natural mortality rates increased the natural variability of stocks, and also decreased the efficiency of management. These results highlight the difficulties that managers in small Pacific islands can expect in the future in the face of global warming, climate anomalies and new mass mortalities. Copyright © 2017 Elsevier Inc. All rights reserved.

Molecular characterization of a novel algal glutamine synthetase (GS) and an algal glutamate synthase (GOGAT) from the colorful outer mantle of the giant clam, Tridacna squamosa, and the putative GS-GOGAT cycle in its symbiotic zooxanthellae.

Science.gov (United States)

Fam, Rachel R S; Hiong, Kum C; Choo, Celine Y L; Wong, Wai P; Chew, Shit F; Ip, Yuen K

2018-05-20

Giant clams harbor symbiotic zooxanthellae (Symbiodinium), which are nitrogen-deficient, mainly in the fleshy and colorful outer mantle. This study aimed to sequence and characterize the algal Glutamine Synthetase (GS) and Glutamate Synthase (GLT), which constitute the glutamate synthase cycle (or GS-GOGAT cycle, whereby GOGAT is the protein acronym of GLT) of nitrogen assimilation, from the outer mantle of the fluted giant clam, Tridacna squamosa. We had identified a novel GS-like cDNA coding sequence of 2325 bp, and named it as T. squamosa Symbiodinium GS1 (TSSGS1). The deduced TSSGS1 sequence had 774 amino acids with a molecular mass of 85 kDa, and displayed the characteristics of GS1 and Nucleotide Diphosphate Kinase. The cDNA coding sequence of the algal GLT, named as T. squamosa Symbiodinium GLT (TSSGLT), comprised 6399 bp, encoding a protein of 2133 amino acids and 232.4 kDa. The zooxanthellal origin of TSSGS1 and TSSGOGAT was confirmed by sequence comparison and phylogenetic analyses. Indeed, TSSGS1 and TSSGOGAT were expressed predominately in the outer mantle, which contained the majority of the zooxanthellae. Immunofluorescence microscopy confirmed the expression of TSSGS1 and TSSGOGAT in the cytoplasm and the plastids, respectively, of the zooxanthellae in the outer mantle. It can be concluded that the symbiotic zooxanthellae of T. squamosa possesses a glutamate synthase (TSSGS1-TSSGOGAT) cycle that can assimilate endogenous ammonia produced by the host clam into glutamate, which can act as a substrate for amino acid syntheses. Thus, our results provide insights into why intact giant clam-zooxanthellae associations do not excrete ammonia under normal circumstances. Copyright © 2018 Elsevier B.V. All rights reserved.

Comparative Study of the Accumulation of Ni in Different Tissues of Mussels and Soft Clams

Directory of Open Access Journals (Sweden)

Chalkiadakis O.

2013-04-01

Full Text Available Two bivalves, the mussel Mytilus galloprovincialis, and the soft clam Callista chione were exposed to various Ni concentrations for a total period of 20 days, and then a depuration period of 10 days followed. Nickel accumulation in gills, mantle and the remaining body of the animals was measured after 5, 10, 15 and 20 days of exposure to Ni-contaminated seawater. The two organisms showed different behavior regarding Ni accumulation in all three tissues examined. In all concentrations, Ni accumulation increased with time in all three tissues of Mytilus galloprovincialis with gills being the most effective accumulator per dry mass. On the other hand, Callista chione showed an initial response to Ni contamination the first 5 days, followed by stabilization or even a slight decrease of Ni accumulation.

Rad-hard embedded computers for nuclear robotics; Calculateurs durcis embarques pour la robotique nucleaire

Energy Technology Data Exchange (ETDEWEB)

Giraud, A; Joffre, F; Marceau, M; Robiolle, M; Brunet, J P; Mijuin, D

1994-12-31

For requirements of nuclear industries, it is necessary to use robots with embedded rad hard electronics and high level safety. The computer developed for french research program SYROCO is presented in this paper. (authors). 8 refs., 5 figs.

Relationship between nickel and cobalt sensitization in hard metal workers

Energy Technology Data Exchange (ETDEWEB)

Rystedt, I; Fischer, T

1983-05-01

Eight hundred fifty-three hard metal workers were examined and patch tested with 20 substances from their environment, including nickel and cobalt. Nickel sensitivity was found in 2 men and 38 women. 88% of the nickel-sensitive individuals had developed a jewelry dermatitis prior to employment in the hard metal industry or before the appearance of hand eczema. 29% of the hard metal workers gave a history of slight irritant dermatitis. In the nickel sensitized group, 40% had had severe hand eczema which generally appeared 6-12 months after starting employment. In 25% of the cases, nickel sensitive individuals developed cobalt allergy, compared with 5% in the total population investigated. Most facts indicate that nickel sensitivity and irritant hand eczema precede cobalt sensitization. Hard metal workers with simultaneous nickel and cobalt sensitivity had a more severe hand eczema than those with isolated cobalt or nickel sensitivity or only irritant dermatitis. 64% of the female population had pierced ear lobes. Among the nickel allergic women, 95% had pierced ear lobes. The use of earrings containing nickel after piercing is strongly suspected of being the major cause of nickel sensitivity. Piercing at an early age seems to increase the risk of incurring nickel sensitivity.

Sequencing and de novo assembly of the Asian clam (Corbicula fluminea transcriptome using the Illumina GAIIx method.

Directory of Open Access Journals (Sweden)

Huihui Chen

Full Text Available BACKGROUND: The Asian clam (Corbicula fluminea is currently one of the most economically important aquatic species in China and has been used as a test organism in many environmental studies. However, the lack of genomic resources, such as sequenced genome, expressed sequence tags (ESTs and transcriptome sequences has hindered the research on C. fluminea. Recent advances in large-scale RNA-Seq enable generation of genomic resources in a short time, and provide large expression datasets for functional genomic analysis. METHODOLOGY/PRINCIPAL FINDINGS: We used a next-generation high-throughput DNA sequencing technique with an Illumina GAIIx method to analyze the transcriptome from the whole bodies of C. fluminea. More than 62,250,336 high-quality reads were generated based on the raw data, and 134,684 unigenes with a mean length of 791 bp were assembled using the Velvet and Oases software. All of the assembly unigenes were annotated by running BLASTx and BLASTn similarity searches on the Nt, Nr, Swiss-Prot, COG and KEGG databases. In addition, the Clusters of Orthologous Groups (COGs, Gene Ontology (GO terms and Kyoto Encyclopedia of Gene and Genome (KEGG annotations were also assigned to each unigene transcript. To provide a preliminary verification of the assembly and annotation results, and search for potential environmental pollution biomarkers, 15 functional genes (five antioxidase genes, two cytochrome P450 genes, three GABA receptor-related genes and five heat shock protein genes were cloned and identified. Expressions of the 15 selected genes following fluoxetine exposure confirmed that the genes are indeed linked to environmental stress. CONCLUSIONS/SIGNIFICANCE: The C. fluminea transcriptome advances the underlying molecular understanding of this freshwater clam, provides a basis for further exploration of C. fluminea as an environmental test organism and promotes further studies on other bivalve organisms.

Genetic diversity and population differentiation of small giant clam Tridacna maxima in Comoros islands assessed by microsatellite markers.

Science.gov (United States)

Ahmed Mohamed, Nadjim; Yu, Qian; Chanfi, Mohamed Ibrahim; Li, Yangping; Wang, Shi; Huang, Xiaoting; Bao, Zhenmin

2016-01-01

Small giant clam, Tridacna maxima , widely distributed from French Polynesia to East Africa, has faced population declines due to over-exploitation. Comoros islands are an important biogeographic region due to potential richness of marine species, but no relevant information is available. In order to facilitate devising effective conservation management plan for T. maxima , nine microsatellite markers were used to survey genetic diversity and population differentiation of 72 specimens collected from three Comoros islands, Grande Comore, Moheli and Anjouan. A total of 51 alleles were detected ranged from 2 to 8 per locus. Observed and expected heterozygosity varied from 0.260 to 0.790 and from 0.542 to 0.830, respectively. All populations have high genetic diversity, especially the population in Moheli, a protected area, has higher genetic diversity than the others. Significant heterozygote deficiencies were recorded, and null alleles were probably the main factor leading to these deficits. F ST value indicated medium genetic differentiation among the populations. Although significant, AMOVA revealed 48.9 % of genetic variation within individuals and only a small variation of 8.9 % was found between populations. Gene flow was high ( Nm  = 12.40) between Grande Comore and Moheli, while lower ( Nm  = 1.80) between Grande Comore and Anjouan, explaining geographic barriers to genetic exchanges might exist in these two islands. Global gene flow analysis ( Nm  = 5.50) showed that larval dispersal is enough to move between the islands. The high genetic diversity and medium population differentiation revealed in the present study offer useful information on genetic conservation of small giant clams.

Seawater acidification affects the physiological energetics and spawning capacity of the Manila clam Ruditapes philippinarum during gonadal maturation.

Science.gov (United States)

Xu, Xian; Yang, Feng; Zhao, Liqiang; Yan, Xiwu

2016-06-01

Ocean acidification is predicted to have widespread implications for marine bivalve mollusks. While our understanding of its impact on their physiological and behavioral responses is increasing, little is known about their reproductive responses under future scenarios of anthropogenic climate change. In this study, we examined the physiological energetics of the Manila clam Ruditapes philippinarum exposed to CO 2 -induced seawater acidification during gonadal maturation. Three recirculating systems filled with 600 L of seawater were manipulated to three pH levels (8.0, 7.7, and 7.4) corresponding to control and projected pH levels for 2100 and 2300. In each system, temperature was gradually increased ca. 0.3°C per day from 10 to 20°C for 30days and maintained at 20°C for the following 40days. Irrespective of seawater pH levels, clearance rate (CR), respiration rate (RR), ammonia excretion rate (ER), and scope for growth (SFG) increased after a 30-day stepwise warming protocol. When seawater pH was reduced, CR, ratio of oxygen to nitrogen, and SFG significantly decreased concurrently, whereas ammonia ER increased. RR was virtually unaffected under acidified conditions. Neither temperature nor acidification showed a significant effect on food absorption efficiency. Our findings indicate that energy is allocated away from reproduction under reduced seawater pH, potentially resulting in an impaired or suppressed reproductive function. This interpretation is based on the fact that spawning was induced in only 56% of the clams grown at pH 7.4. Seawater acidification can therefore potentially impair the physiological energetics and spawning capacity of R. philippinarum. Copyright © 2016 Elsevier Inc. All rights reserved.

Unique opportunities in powder injection molding of refractory and hard materials

International Nuclear Information System (INIS)

German, R.M.

2001-01-01

Powder injection molding (PIM) is a relatively new manufacturing process for the creation of complicated net-shapes outside the range usually possible via powder metallurgy technologies. This new process is now in production at more than 550 sites around the world. Although a small industry, PIM will soon pass $1 billion dollars (USA) in annual sales. This presentation overviews the PIM process, some of the new developments and some of the successes that have occurred with both refractory metals and hard metals. Example applications are seen in medical and dental devices, industrial components, wristwatches, jet engines, firearms, automotive components, and even hand tools. To help establish the novel growth opportunities, PIM is compared to other fabrication routes to better understand the design features arising with this new approach, providing a compelling case for substantial opportunities in the refractory and hard materials. Illustrations are provided of several components in production. New opportunities abound for the technology, since it eliminates the shape complexity barrier associated with die compaction and the cost of machining associated with complicated or dimensionally precise components. Further, a relative cost advantage exists for refractory and hard materials because PIM can use the same powders at the same prices as employed in alternative processes. Future successes will occur by early identification of candidate materials and designs. Early examples include tungsten heavy alloy components now reaching production rates of six million per month. (author)

Bond-orientational analysis of hard-disk and hard-sphere structures.

Science.gov (United States)

Senthil Kumar, V; Kumaran, V

2006-05-28

We report the bond-orientational analysis results for the thermodynamic, random, and homogeneously sheared inelastic structures of hard-disks and hard-spheres. The thermodynamic structures show a sharp rise in the order across the freezing transition. The random structures show the absence of crystallization. The homogeneously sheared structures get ordered at a packing fraction higher than the thermodynamic freezing packing fraction, due to the suppression of crystal nucleation. On shear ordering, strings of close-packed hard-disks in two dimensions and close-packed layers of hard-spheres in three dimensions, oriented along the velocity direction, slide past each other. Such a flow creates a considerable amount of fourfold order in two dimensions and body-centered-tetragonal (bct) structure in three dimensions. These transitions are the flow analogs of the martensitic transformations occurring in metals due to the stresses induced by a rapid quench. In hard-disk structures, using the bond-orientational analysis we show the presence of fourfold order. In sheared inelastic hard-sphere structures, even though the global bond-orientational analysis shows that the system is highly ordered, a third-order rotational invariant analysis shows that only about 40% of the spheres have face-centered-cubic (fcc) order, even in the dense and near-elastic limits, clearly indicating the coexistence of multiple crystalline orders. When layers of close-packed spheres slide past each other, in addition to the bct structure, the hexagonal-close-packed (hcp) structure is formed due to the random stacking faults. Using the Honeycutt-Andersen pair analysis and an analysis based on the 14-faceted polyhedra having six quadrilateral and eight hexagonal faces, we show the presence of bct and hcp signatures in shear ordered inelastic hard-spheres. Thus, our analysis shows that the dense sheared inelastic hard-spheres have a mixture of fcc, bct, and hcp structures.

IMPROVING THE HARD SKILLS AND SOFT SKILLS OF MADRASAH TEACHERS FOR DEALING ASEAN ECONOMIC COMMUNITY (AEC)

OpenAIRE

Laely Mahmudah

2016-01-01

ASEAN Economic Community (AEC) has been started rolling. Market competition, industry, and skilled workers, especially in the field of education are becoming increasingly stringent. Madrasah teachers as the front liners in the education process should improve the quality of human resources. Hard skills and soft skills of madrasah teachers must be improved to deal with the Asean Economic Community (AEC). Hard skills are academic skills that include pedagogic competence and professional compete...

Improving The Hard Skills And Soft Skills Of Madrasah Teachers For Dealing ASEAN Economic Community (Aec)

OpenAIRE

Mahmudah, Laely

2016-01-01

ASEAN Economic Community (AEC) has been started rolling. Market competition, industry, and skilled workers, especially in the field of education are becoming increasingly stringent. Madrasah teachers as the front liners in the education process should improve the quality of human resources. Hard skills and soft skills of madrasah teachers must be improved to deal with the Asean Economic Community (AEC). Hard skills are academic skills that include pedagogic competence and professional compete...

Hard copies for digital medical images: an overview

Science.gov (United States)

Blume, Hartwig R.; Muka, Edward

1995-04-01

This paper is a condensed version of an invited overview on the technology of film hard-copies used in radiology. Because the overview was given to an essentially nonmedical audience, the reliance on film hard-copies in radiology is outlined in greater detail. The overview is concerned with laser image recorders generating monochrome prints on silver-halide films. The basic components of laser image recorders are sketched. The paper concentrates on the physical parameters - characteristic function, dynamic range, digitization resolution, modulation transfer function, and noise power spectrum - which define image quality and information transfer capability of the printed image. A preliminary approach is presented to compare the printed image quality with noise in the acquired image as well as with the noise of state-of- the-art cathode-ray-tube display systems. High-performance laser-image- recorder/silver-halide-film/light-box systems are well capable of reproducing acquired radiologic information. Most recently development was begun toward a display function standard for soft-copy display systems to facilitate similarity of image presentation between different soft-copy displays as well as between soft- and hard-copy displays. The standard display function is based on perceptional linearization. The standard is briefly reviewed to encourage the printer industry to adopt it, too.

Characterisation of weldment hardness, impact energy and microstructure in API X65 steel

International Nuclear Information System (INIS)

Hashemi, S.H.; Mohammadyani, D.

2012-01-01

The variation of microstructure and mechanical properties in various sub-zones of double submerged arc welded line pipe steel of grade API X65 was investigated. Instrumented Charpy V-notch tests and Vickers hardness experiments were conducted on the fusion zone, base metal and heat affected zone of the weld joint in 14.3 mm thick, 1219 mm outside diameter spiral pipeline. The lowest impact energy and the highest hardness level (160J and 218 HV, respectively) were recorded in the fusion zone. The low energy and high hardness characteristics of the seam weld can be attributed to its cast microstructure and the presence of grain boundary phases (such as proeutectoid ferrite), confirmed by standard metallographic observation. Despite this, service requirements set by the API 5L industry code (minimum impact energy of 73J, maximum hard spots of 350 HV) were fulfilled by the tested steel. Highlights: ► Experimental study of API X65 steel microstructure. ► Analysis of the relationship between X65 steel microstructure and hardness. ► Analysis of the relationship between X65 steel microstructure and impact energy. ► Presentation of detailed technical information on DSA welding in spiral pipes.

REVIEW ON HARD SEGMENT INFLUENCESON THE PHYSICALPROPERTIES OF THERMOPLASTICPOLYURETHANES

Directory of Open Access Journals (Sweden)

Nurul Hidayati Fithriyah

2012-04-01

Full Text Available Thermoplastic polyurethanes (TPUs are the fastest growing market in polyurethane technology mainly due to their easy process ability, versatile properties and recyclable nature. They find applications in high performance materials like coatings, adhesives, fibres and foams in a variety of industries ranging from automotive and footwear to medical implants. TPUs are linear block copolymers comprising of alternating soft and hard segments. The versatile properties of TPUs are usually attributed to their phase-separated morphologies. Different parameters are known to affect TPUs physical properties. One of those is their chemical architecture that is the statistical arrangement of hard segments (HS and soft segments (SS.In particular the architecture of the HS will influence the molecular structure and intermolecular interaction. Its role as physical crosslink sites will govern thermal, mechanical and morphological properties. Hence a modification of HS chemical architecture might adjust the ultimate properties of TPU. This implication is important in process control of production and design of application. Therefore this paper will review various studies to understand the effect of different architecture to the properties of TPU.   Keywords: thermoplasticpolyurethanes, hard segment architecture, physical properties

Evaluation of the MODIS Aerosol Retrievals over Ocean and Land during CLAMS.

Science.gov (United States)

Levy, R. C.; Remer, L. A.; Martins, J. V.; Kaufman, Y. J.; Plana-Fattori, A.; Redemann, J.; Wenny, B.

2005-04-01

The Chesapeake Lighthouse Aircraft Measurements for Satellites (CLAMS) experiment took place from 10 July to 2 August 2001 in a combined ocean-land region that included the Chesapeake Lighthouse [Clouds and the Earth's Radiant Energy System (CERES) Ocean Validation Experiment (COVE)] and the Wallops Flight Facility (WFF), both along coastal Virginia. This experiment was designed mainly for validating instruments and algorithms aboard the Terra satellite platform, including the Moderate Resolution Imaging Spectroradiometer (MODIS). Over the ocean, MODIS retrieved aerosol optical depths (AODs) at seven wavelengths and an estimate of the aerosol size distribution. Over the land, MODIS retrieved AOD at three wavelengths plus qualitative estimates of the aerosol size. Temporally coincident measurements of aerosol properties were made with a variety of sun photometers from ground sites and airborne sites just above the surface. The set of sun photometers provided unprecedented spectral coverage from visible (VIS) to the solar near-infrared (NIR) and infrared (IR) wavelengths. In this study, AOD and aerosol size retrieved from MODIS is compared with similar measurements from the sun photometers. Over the nearby ocean, the MODIS AOD in the VIS and NIR correlated well with sun-photometer measurements, nearly fitting a one-to-one line on a scatterplot. As one moves from ocean to land, there is a pronounced discontinuity of the MODIS AOD, where MODIS compares poorly to the sun-photometer measurements. Especially in the blue wavelength, MODIS AOD is too high in clean aerosol conditions and too low under larger aerosol loadings. Using the Second Simulation of the Satellite Signal in the Solar Spectrum (6S) radiative code to perform atmospheric correction, the authors find inconsistency in the surface albedo assumptions used by the MODIS lookup tables. It is demonstrated how the high bias at low aerosol loadings can be corrected. By using updated urban/industrial aerosol

Soft capitalism and a hard industry: virtualism, the 'transition industry' and the restructuring of the Ukrainian coal industry

Energy Technology Data Exchange (ETDEWEB)

Adam Swain [University of Nottingham (United Kingdom). School of Geography

2006-06-15

This paper examines the geographical transfer of economic knowledge and practices from centres of neoliberalism in North America and Western Europe to post-soviet Ukraine. The paper argues that a 'transition industry' emerged in the wake of the disintegration of the soviet system whose purpose was to realize economic transition in central and eastern Europe. The paper discusses the emergence of a community of academic and professional economists affiliated to international financial institutions and academic and professional economic research organizations in Kyiv engaged in promoting the Washington consensus. This community identified the coal industry, located in the Ukrainian Donbas, as a barrier to structural economic reform and the political re-alignment of the country. The paper then examines the way the World Bank unsuccessfully attempted to force the coal industry to conform to its own policy prescriptions. The example points to the articulation not only of extra-local and internal processes of neoliberalization, but also with indigenous informal marketization. In this instance the World Bank's vision failed to materialize because state power could not be allied to its neoliberal project.

Simulating the evolution of industries using a dynamic behavioural model

OpenAIRE

Kunc, Martin

2004-01-01

Investment decisions determine that not only the evolution of industries is hard to forecast with certainty but also industries may have different dynamic behaviour and evolutionary paths. In this paper we present a behavioural framework to simulate the evolution of industries. Two factors determine the dynamic behaviour of an industry: managerial decision-making and the interconnected set of resources. Managerial decision-making significantly affects the dynamic behaviour of firms. Bounded r...

New-Generation Aluminum Composite with Bottom Ash Industrial Waste

Science.gov (United States)

Mandal, A. K.; Sinha, O. P.

2018-02-01

Industrial waste bottom ash (BA) from a pulverized coal combustion boiler containing hard wear-resistant particles was utilized in this study to form an aluminum composite through a liquid metallurgy route. Composites comprising 5 wt.% and 10 wt.% bottom ash were characterized for their physiochemical, microstructural, mechanical, as well as tribological properties, along with pure aluminum. Scanning electron microscopy (SEM) microstructure revealed uniform distribution of BA particles throughout the matrix of the composite, whereas x-ray diffraction (XRD) analysis confirmed presence of aluminosilicate phase. Addition of 10 wt.% BA improved the Brinell hardness number (BHN) from 13 to 19 and ultimate tensile strength (UTS) from 71 MPa to 87 MPa, whereas ductility was adversely reduced after 5% BA addition. Incorporation of BA particles resulted in reduced dry sliding wear rates examined up to 80 N load compared with aluminum. Hence, such composites having lower cost could be applied as significantly hard, wear-resistant materials in applications in the automotive industry.

New-Generation Aluminum Composite with Bottom Ash Industrial Waste

Science.gov (United States)

Mandal, A. K.; Sinha, O. P.

2018-06-01

Industrial waste bottom ash (BA) from a pulverized coal combustion boiler containing hard wear-resistant particles was utilized in this study to form an aluminum composite through a liquid metallurgy route. Composites comprising 5 wt.% and 10 wt.% bottom ash were characterized for their physiochemical, microstructural, mechanical, as well as tribological properties, along with pure aluminum. Scanning electron microscopy (SEM) microstructure revealed uniform distribution of BA particles throughout the matrix of the composite, whereas x-ray diffraction (XRD) analysis confirmed presence of aluminosilicate phase. Addition of 10 wt.% BA improved the Brinell hardness number (BHN) from 13 to 19 and ultimate tensile strength (UTS) from 71 MPa to 87 MPa, whereas ductility was adversely reduced after 5% BA addition. Incorporation of BA particles resulted in reduced dry sliding wear rates examined up to 80 N load compared with aluminum. Hence, such composites having lower cost could be applied as significantly hard, wear-resistant materials in applications in the automotive industry.

Effect of heat-treatment on the hardness and mechanical properties of Boron Alloyed Steel

Directory of Open Access Journals (Sweden)

bin Khiyon Mohammad Raffik

2017-01-01

Full Text Available In an automotive industry, hot stamped, die quenched structural components have been widely used to provide extra protection against crash intrusion. Boron alloyed steel exhibit limited ductility, but it also promotes improvement in impact performance. This study analyzed the effect of cooling rate on the hardness and energy absorption. Self-quenched specimens were heated to 850°C and cooled in air of room temperature, water at room temperature and cold water. Vickers hardness test and tensile test was then carried out to analyze the effect of different quenching rate. Self-quenched specimens were compared to the properties of the die-quenched specimens obtained from commercial automobile body. Result shows that boron steel with the highest cooling rate has the highest value of hardness but low in strength.

Northern Marshall Islands radiological survey: radionuclide concentrations in fish and clams and estimated doses via the marine pathway

International Nuclear Information System (INIS)

Robison, W.L.; Noshkin, V.E.; Phillips, W.A.; Eagle, R.J.

1981-01-01

The survey consisted, in part, of an aerial radiological reconnaissance to map the external gamma-ray exposure rates. As a secondary phase, terrestrial and marine samples were collected to assess the radiological dose from pertinent food chains to atoll inhabitants. The marine sample collection, processing, and dose assessment methodology are presented as well as the concentration data for 90 Sr, 137 Cs, 238 Pu, 239+240 Pu, 241 Am, and any of the other gamma emitters in fish and clam muscle tissue from the different species collected. Doses are calculated from the average radionuclide concentrations in fish and clam muscle tissue assuming an average daily intake of 200 and 10 g, respectivelty. The 90 Sr concentration in muscle tissue is very low and there is little difference in the average concentrations from the different fish from different atolls or islands. The 239+240 Pu concentration in the muscle tissue of all reef species, however, is higher than that in pelagic lagoon fish. In contrast, 137 Cs concentrations are lowest in the muscle tissue of the bottom-feeding reef species and highest in pelagic logoon fish. Recent measurements of radionuclide concentrations in fish muscle tissue and other marine dietary items from international sources show that the average concentrations in species from the Marshall Islands are comparable to those in fish typically consumed as food in the United States and are generally lower than those in most international marine dietary items. The whole-body dose rates based on continuous consumption of 200 g/d of fish range from 0.028 to 0.1 mrem/y; the bone-marrow dose rates range from 0.029 to 0.12 mrem/y. The dose commitment, or 30-y integral doses, range from 0.00063 to 0.0022 rem for the whole body and from 0.00065 to 0.0032 rem for the bone marrow

Hard Skills Dan Soft Skills Pada Bagian Sumber Daya Manusia Di Organisasi Industri

OpenAIRE

Manara, Muhammad Untung

2014-01-01

This study aimed to answer the question "what are the skills required from prospective employees for HR position ?". This study used a qualitative descriptive survey approach. The data analysis used content analysis techniques. Source of data of this study study were 100 companies who advertise job openings in online job site with HR position with any of the terms was psychology graduate. From the analysis found two categories of skills required for the position HR company that was hard skil...

LNG Industry in Europe beset by uncertainties

International Nuclear Information System (INIS)

Forbes, A.

2007-01-01

Over the past five years, the liquefied natural gas industry (LNG) has metamorphosed from a specialist niche business into a mainstream source of energy supply, It is currently by far the fastest-growing source of fossil fuel and growth forecasts. However, the industry's future is beset by uncertainty, not least in Europe. Supply is tight, technical skills are hard to come by, and even future demand looks uncertain

Remember Hard but Think Softly: Metaphorical Effects of Hardness/Softness on Cognitive Functions

Directory of Open Access Journals (Sweden)

Jiushu Xie

2016-09-01

Full Text Available Previous studies have found that bodily stimulation, such as hardness, biases social judgment and evaluation via metaphorical association; however, it remains unclear whether bodily stimulation also affects cognitive functions, such as memory and creativity. The current study used metaphorical associations between hard and rigid and between soft and flexible in Chinese, to investigate whether the experience of hardness affected cognitive functions requiring either rigidity (memory or flexibility (creativity. In Experiment 1, we found that Chinese-speaking participants performed better at recalling previously memorized words while sitting on a hard-surface stool (the hard condition than a cushioned one (the soft condition. In Experiment 2, participants sitting on a cushioned stool outperformed those sitting on a hard-surface stool on a Chinese riddle task, which required creative/flexible thinking, but not on an analogical reasoning task, which required both rigid and flexible thinking. The results suggest the hardness experience affects cognitive functions that are metaphorically associated with rigidity and flexibility. They support the embodiment proposition that cognitive functions and representations could be grounded via metaphorical association in bodily states.

Light exposure enhances urea absorption in the fluted giant clam, Tridacna squamosa, and up-regulates the protein abundance of a light-dependent urea active transporter, DUR3-like, in its ctenidium.

Science.gov (United States)

Chan, Christabel Y L; Hiong, Kum C; Boo, Mel V; Choo, Celine Y L; Wong, Wai P; Chew, Shit F; Ip, Yuen K

2018-04-19

Giant clams live in nutrient-poor reef waters of the Indo-Pacific and rely on symbiotic dinoflagellates ( Symbiodinium spp., also known as zooxanthellae) for nutrients. As the symbionts are nitrogen deficient, the host clam has to absorb exogenous nitrogen and supply it to them. This study aimed to demonstrate light-enhanced urea absorption in the fluted giant clam, Tridacna squamosa , and to clone and characterize the urea active transporter DUR3-like from its ctenidium (gill). The results indicate that T. squamosa absorbs exogenous urea, and the rate of urea uptake in the light was significantly higher than that in darkness. The DUR3-like coding sequence obtained from its ctenidium comprised 2346 bp, encoding a protein of 782 amino acids and 87.0 kDa. DUR3-like was expressed strongly in the ctenidium, outer mantle and kidney. Twelve hours of exposure to light had no significant effect on the transcript level of ctenidial DUR3-like However, between 3 and 12 h of light exposure, DUR3-like protein abundance increased progressively in the ctenidium, and became significantly greater than that in the control at 12 h. DUR3-like had an apical localization in the epithelia of the ctenidial filaments and tertiary water channels. Taken together, these results indicate that DUR3-like might participate in light-enhanced urea absorption in the ctenidium of T. squamosa When made available to the symbiotic zooxanthellae that are known to possess urease, the absorbed urea can be metabolized to NH 3 and CO 2 to support amino acid synthesis and photosynthesis, respectively, during insolation. © 2018. Published by The Company of Biologists Ltd.

Industrial gases

International Nuclear Information System (INIS)

Hunter, D.; Jackson, D.; Coeyman, M.

1993-01-01

Industrial gas companies have fought hard to boost sales and hold margins in the tough economic climate, and investments are well down from their 1989-'91 peak. But 'our industry is still very strong long term' says Alain Joly, CEO of industry leader L'Air Liquide (AL). By 1994, if a European and Japanese recovery follows through on one in the U.S., 'we could see major [investment] commitments starting again,' he says. 'Noncryogenic production technology is lowering the cost of gas-making possible new applications, oxygen is getting plenty of attention in the environmental area, and hydrogen also fits into the environmental thrust,' says Bob Lovett, executive v.p./gases and equipment with Air Products ampersand Chemicals (AP). Through the 1990's, 'Industrial gases could grow even faster than in the past decade,' he says. Virtually a new generation of new gases applications should become reality by the mid-1990s, says John Campbell, of industry consultants J.R. Campbell ampersand Associates (Lexington, MA). Big new oxygen volumes will be required for powder coal injection in blast furnaces-boosting a steel mill's requirement as much as 40% and coal gasification/combined cycle (CGCC). Increased oil refinery hydroprocessing needs promise hydrogen requirements

Capacity waste management at automotive industry in India: A Six Sigma observation

Directory of Open Access Journals (Sweden)

Rajeev Rathi

2015-11-01

Full Text Available The companies in present challenging world are trying hard to improve their productivity and capacity utilization levels without actually increasing the sale price of their products. In India, in today combative world, the majority of automotive manufacturing industries are scuffling hard with their low levels of productivity. Possibly there are different reasons for this and capacity waste or under-utilization of productive capacity in industries appears to be one of the prime reasons. As corrective action, the present study makes an effort to check the efficacy of Six Sigma approach to improve capacity waste management. With a case study, through successful execution of Define phase, the study confirms the perception of Six Sigma for capacity waste management in Indian automotive industry.

Industrial heat treatment of R-HPDC A356 automotive brake callipers [Conference paper

CSIR Research Space (South Africa)

Chauke, L

2012-10-01

Full Text Available brake callipers to the automotive industry. This research studied A356 brake callipers heat treated on the industrial scale with particular emphasis on the resulting microstructure, hardness and tensile properties. The eutectic Si...

Burning actinides in very hard spectrum reactors

International Nuclear Information System (INIS)

Robinson, A.H.; Shirley, G.W.; Prichard, A.W.; Trapp, T.J.

1978-01-01

The major unresolved problem in the nuclear industry is the ultimate disposition of the waste products of light water reactors. The study demonstrates the feasibility of designing a very hard spectrum actinide burner reactor (ABR). A 1100 MW/sub t/ ABR design fueled entirely with actinides reprocessed from light water reactor (LWR) wastes is proposed as both an ultimate disposal mechanism for actinides and a means of concurrently producing usable power. Actinides from discharged ABR fuel are recycled to the ABR while fission products are routed to a permanent repository. As an integral part of a large energy park, each such ABR would dispose of the waste actinides from 2 LWRs

30 CFR 75.1720-1 - Distinctively colored hard hats, or hard caps; identification for newly employed, inexperienced...

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Distinctively colored hard hats, or hard caps... STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1720-1 Distinctively colored hard hats, or hard caps; identification for newly employed, inexperienced miners. Hard hats or hard caps distinctively different in color...

30 CFR 77.1710-1 - Distinctively colored hard hats or hard caps; identification for newly employed, inexperienced...

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Distinctively colored hard hats or hard caps... Distinctively colored hard hats or hard caps; identification for newly employed, inexperienced miners. Hard hats or hard caps distinctively different in color from those worn by experienced miners shall be worn at...

Effects of Freshwater Clam Extract Supplementation on Time to Exhaustion, Muscle Damage, Pro/Anti-Inflammatory Cytokines, and Liver Injury in Rats after Exhaustive Exercise

Directory of Open Access Journals (Sweden)

Kuang-Wen Liao

2013-03-01

Full Text Available The potent anti-inflammatory activities and tissue-protective effects of freshwater clams (Corbicula fluminea have been well reported. The aim of this study was to determine the effects of freshwater clam extract (FCE supplementation on time to exhaustion, muscle damage, pro- and anti-inflammatory cytokines, and liver injury in rats after exhaustive exercise. Thirty-two rats were divided into four groups: sedentary control (SC; SC group with FCE supplementation (SC+FCE; exhaustive exercise (E; and E group with FCE supplementation (E+FCE. The SC+FCE and E+FCE groups were treated with gavage administration of 20 mg/kg for seven consecutive days. Blood samples were collected for the evaluation of biochemical parameters. The cytokine levels of TNF-α and IL-10 were also examined. Twenty-four hours after exhaustive exercise, the rat livers were removed for H & E staining. The FCE supplementation could extend the time to exhaustion in exercised rats. The levels of CPK, LDH, AST, ALT, lactate, TNF-α and H & E stains of the liver injury were significantly decreased in the E+FCE group, but the blood glucose and IL-10 were significantly higher in comparison with the E group. This study suggests that FCE supplementation may improve endurance performance and reduce exercise-induced muscle damage, inflammatory stress and liver injury.

Enhanced hardness in epitaxial TiAlScN alloy thin films and rocksalt TiN/(Al,Sc)N superlattices

Energy Technology Data Exchange (ETDEWEB)

Saha, Bivas [School of Materials Engineering, Purdue University, West Lafayette, Indiana 47907 (United States); Birck Nanotechnology Center, Purdue University, West Lafayette, Indiana 47907 (United States); Lawrence, Samantha K.; Bahr, David F. [School of Materials Engineering, Purdue University, West Lafayette, Indiana 47907 (United States); Schroeder, Jeremy L.; Birch, Jens [Thin Film Physics Division, Department of Physics, Chemistry, and Biology (IFM), Linköping University, SE-581 83 Linköping (Sweden); Sands, Timothy D. [School of Materials Engineering, Purdue University, West Lafayette, Indiana 47907 (United States); Birck Nanotechnology Center, Purdue University, West Lafayette, Indiana 47907 (United States); School of Electrical and Computer Engineering, Purdue University, West Lafayette, Indiana 47907 (United States)

2014-10-13

High hardness TiAlN alloys for wear-resistant coatings exhibit limited lifetimes at elevated temperatures due to a cubic-AlN to hexagonal-AlN phase transformation that leads to decreasing hardness. We enhance the hardness (up to 46 GPa) and maximum operating temperature (up to 1050 °C) of TiAlN-based coatings by alloying with scandium nitride to form both an epitaxial TiAlScN alloy film and epitaxial rocksalt TiN/(Al,Sc)N superlattices on MgO substrates. The superlattice hardness increases with decreasing period thickness, which is understood by the Orowan bowing mechanism of the confined layer slip model. These results make them worthy of additional research for industrial coating applications.

On the Dynamics of Rocking Motion of the Hard-Disk Drive Spindle Motor System

Science.gov (United States)

Wang, Joseph

Excessive rocking motion of the spindle motor system can cause track misregistration resulting in poor throughput or even drive failure. The chance of excessive disk stack rocking increases as a result of decreasing torsional stiffness of spindle motor bearing system due to the market demand for low profile hard drives. As the track density increases and the vibration specification becomes increasingly stringent, rocking motion of a spindle motor system deserves even more attention and has become a primary challenge for a spindle motor system designer. Lack of understanding of the rocking phenomenon combined with misleading paradox has presented a great difficulty in the effort of avoiding the rocking motion in the hard-disk drive industry. This paper aims to provide fundamental understanding of the rocking phenomenon of a rotating spindle motor system, to clarify the paradox in disk-drive industry and to provide a design guide to an optimized spindle system. This paper, theoretically and experimentally, covers a few important areas of industrial interest including the prediction of rocking natural frequencies and mode shape of a rotating spindle, free vibration, and frequency response under common forcing functions such as rotating and fixed-plane forcing functions. The theory presented here meets with agreeable experimental observation.

Experimental Study of Bilinear Initiating System Based on Hard Rock Pile Blasting

Directory of Open Access Journals (Sweden)

Yusong Miao

2017-01-01

Full Text Available It is difficult to use industrial explosives to excavate hard rock and achieve suitable blasting effect due to the low energy utilization rate resulting in large rocks and short blasting footage. Thus, improving the utilization ratio of the explosive energy is important. In this study, a novel bilinear initiation system based on hard rock blasting was proposed to improve the blasting effects. Furthermore, on the basis of the detonation wave collision theory, frontal collision, oblique reflection, and Mach reflection during detonation wave propagation were studied. The results show that the maximum detonation pressure at the Mach reflection point where the incident angle is 46.9° is three times larger than the value of the explosive complete detonation. Then, in order to analyze the crack propagation in different initiation forms, a rock fracture test slot was designed, and the results show that bilinear initiating system can change the energy distribution of explosives. Finally, field experiment was implemented at the hard rock pile blasting engineering, and experimental results show that the present system possesses high explosive energy utilization ratio and low rock fragments size. The results of this study can be used to improve the efficiency in hard rock blasting.

Technology for meat-grinding systems to improve removal of hard particles from ground meat.

Science.gov (United States)

Zhao, Y; Sebranek, J G

1997-03-01

With increased consumption of ground meat, especially ground beef, quality issues for these products have become more important to industry and consumers alike. Ground meats are usually obtained from relatively low-value cuts and trimmings, and may on occasion contain undesirable hard particles. Hard particles in coarse-ground meat products may include bone chips or fragments, cartilage and dense connective tissue; all of which are considered undesirable defects and which can be reduced by utilizing hard-particle removal systems during grinding operations. This review discusses the principles of hard-particle separation from ground meat, the factors which influence performance of particle separation and some commercially available particle removal systems. Product and processing parameters such as initial bone and connective tissue content, fat content, temperature, pre-grinding size and grinder knife design are considered important for removing hard particles effectively. Pressure gradient on the grinder knife/plate interface was found to play a significant role in particle separation from soft (fat and lean) tissue. Various commercial systems, which are classified as central removal and periphery removal systems, are also discussed. Finally, the authors suggest some processing considerations for meat grinding to help achieve the best quality ground meat for consumers' satisfaction.

ANALISIS SISTEM PENGEMBANGAN KAWASAN INDUSTRI TERPADU BERWAWASAN LINGKUNGAN: STUDI KASUS DI PT. KAWASAN INDUSTRI MEDAN (Analysis System of Integrated Industrial Estate Ecodevelopment Case Study: At PT. Medan Industrial Estate

Directory of Open Access Journals (Sweden)

Kimberly Febrina Kodrat

2011-07-01

Full Text Available ABSTRAK Tujuan utama penelitian adalah menganalisis kinerja pengembangan kawasan industri terpadu berwawasan lingkungan. Cakupan aspek penelitian disinkronkan dengan konsep pembangunan berkelanjutan sekaligus dijadikan sebagai batasan kajian, yakni mempersekutukan aspek ekonomi, ekologi dan sosial. Data diperoleh dengan menggunakan metode survei melalui observasi, wawancara mendalam, dan pendapat pakar. Metodologi penelitian menggunakan metode survei dengan menggunakan perpaduan antara hard system (analisis sistem dinamis dan soft system (analisis prospektif. Dari hasil uji statistik chi square (α = 0,01 diperoleh bahwa kelompok masyarakat yang bekerja di dalam PT. KIM mempunyai hubungan yang sangat signifikan dengan kelompok masyarakat yang bekerja di luat PT. KIM terhadap tingkat pendapatan, tingkat pendidikan dan faktor usia. Berdasarkan hasil analisis kualitas limbah cair unit IPAL PT. KIM terdapat 5 parameter yang masih berada diatas nilai baku mutu KepMenLHNo.51/1997, yaitu: BOD, COD, TSS, klorida dan amoniak. Tingkat efisiensi pengolahan limbah cair unit IPAL PT. KIM rata-rata 53,07%. Hasil analisis ketergantungan antar faktor dengan menggunakan Analisis Prospektif diperoleh sebanyak 5 faktor strategis masa depan yang mempengaruhi pengembangan kawasan industri terpadu berwawasan lingkungan, yaitu: jumlah industri, permintaan lahan, kebijakan pemerintah, model pengembangan, dan iklim investasi yang kondusif. Pengembangan kawasan industri terpadu berwawasan lingkungan dapat dilakukan dengan strategi moderat dengan kebijakan mencakup jumlah industri bertambah secara bertahap dengan meningkatnya permintaan lahan serta kebijakan pemerintah yang memfasilitasi peningkatan modal pengembangan dan didukung oleh iklim investasi yang kondusif. ABSTRACT The main purpose of the research is to study environmental aspect of industrial estate development. The scope of the research aspects is synchronized with sustainable development concepts, namely

Thermodynamic perturbation theory for fused hard-sphere and hard-disk chain fluids

International Nuclear Information System (INIS)

Zhou, Y.; Hall, C.K.; Stell, G.

1995-01-01

We find that first-order thermodynamic perturbation theory (TPT1) which incorporates the reference monomer fluid used in the generalized Flory--AB (GF--AB) theory yields an equation of state for fused hard-sphere (FHS) chain fluids that has accuracy comparable to the GF--AB and GF--dimer--AC theories. The new TPT1 equation of state is significantly more accurate than other extensions of the TPT1 theory to FHS chain fluids. The TPT1 is also extended to two-dimensional fused hard-disk chain fluids. For the fused hard-disk dimer fluid, the extended TPT1 equation of state is found to be more accurate than the Boublik hard-disk dimer equation of state. copyright 1995 American Institute of Physics

Potential of irradiation technology for improved shellfish sanitation

International Nuclear Information System (INIS)

Mallett, J.C.; Beghian, L.E.; Metcalf, T.G.; Kaylor, J.D.

1991-01-01

Ionizing radiation is shown capable of serving as an effective sanitizing treatment improving the sanitary quality of shellfish and providing an increased margin of safety for shellfish consumers. 60Co irradiation of the hard-shelled clam, Mercenaria mercenaria, and the oyster, Crassostrea virginica, significantly reduced virus carriage numbers without unduly affecting shellfish survival rates or desirable organoleptic qualities. A D10 value of 2 kGy was determined for depletion of hepatitis A virus in clams and oysters as measured by in situ hybridization fluorescent foci and cytopathology enumeration methods. A D10 value of 2.4 kGy was determined for depletion of rotavirus SA11 in clams and oysters as measured by a plaque forming unit enumeration method. Study results showed ionizing radiation capable of providing an extra, highly effective safeguard of shellfish sanitary quality when combined with traditional depuration treatment. Data drawn from other studies is introduced which shows D10 values as low as 1.0 kGy effectively eliminate Vibrio cholerae, and V. parahemolyticus, from shellfish

Effects of hard mask etch on final topography of advanced phase shift masks

Science.gov (United States)

Hortenbach, Olga; Rolff, Haiko; Lajn, Alexander; Baessler, Martin

2017-07-01

Continuous shrinking of the semiconductor device dimensions demands steady improvements of the lithographic resolution on wafer level. These requirements challenge the photomask industry to further improve the mask quality in all relevant printing characteristics. In this paper topography of the Phase Shift Masks (PSM) was investigated. Effects of hard mask etch on phase shift uniformity and mask absorber profile were studied. Design of experiments method (DoE) was used for the process optimization, whereas gas composition, bias power of the hard mask main etch and bias power of the over-etch were varied. In addition, influence of the over-etch time was examined at the end of the experiment. Absorber depth uniformity, sidewall angle (SWA), reactive ion etch lag (RIE lag) and through pitch (TP) dependence were analyzed. Measurements were performed by means of Atomic-force microscopy (AFM) using critical dimension (CD) mode with a boot-shaped tip. Scanning electron microscope (SEM) cross-section images were prepared to verify the profile quality. Finally CD analysis was performed to confirm the optimal etch conditions. Significant dependence of the absorber SWA on hard mask (HM) etch conditions was observed revealing an improvement potential for the mask absorber profile. It was found that hard mask etch can leave a depth footprint in the absorber layer. Thus, the etch depth uniformity of hard mask etch is crucial for achieving a uniform phase shift over the active mask area. The optimized hard mask etch process results in significantly improved mask topography without deterioration of tight CD specifications.

Hard-on-hard lubrication in the artificial hip under dynamic loading conditions.

Directory of Open Access Journals (Sweden)

Robert Sonntag

Full Text Available The tribological performance of an artificial hip joint has a particularly strong influence on its success. The principle causes for failure are adverse short- and long-term reactions to wear debris and high frictional torque in the case of poor lubrication that may cause loosening of the implant. Therefore, using experimental and theoretical approaches models have been developed to evaluate lubrication under standardized conditions. A steady-state numerical model has been extended with dynamic experimental data for hard-on-hard bearings used in total hip replacements to verify the tribological relevance of the ISO 14242-1 gait cycle in comparison to experimental data from the Orthoload database and instrumented gait analysis for three additional loading conditions: normal walking, climbing stairs and descending stairs. Ceramic-on-ceramic bearing partners show superior lubrication potential compared to hard-on-hard bearings that work with at least one articulating metal component. Lubrication regimes during the investigated activities are shown to strongly depend on the kinematics and loading conditions. The outcome from the ISO gait is not fully confirmed by the normal walking data and more challenging conditions show evidence of inferior lubrication. These findings may help to explain the differences between the in vitro predictions using the ISO gait cycle and the clinical outcome of some hard-on-hard bearings, e.g., using metal-on-metal.

Improvement of Strength-Toughness-Hardness Balance in Large Cross-Section 718H Pre-Hardened Mold Steel

Science.gov (United States)

Liu, Hanghang; Fu, Paixian; Liu, Hongwei; Li, Dianzhong

2018-01-01

The strength-toughness combination and hardness uniformity in large cross-section 718H pre-hardened mold steel from a 20 ton ingot were investigated with three different heat treatments for industrial applications. The different microstructures, including tempered martensite, lower bainite, and retained austenite, were obtained at equivalent hardness. The microstructures were characterized by using metallographic observations, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and electron back-scattered diffraction (EBSD). The mechanical properties were compared by tensile, Charpy U-notch impact and hardness uniformity tests at room temperature. The results showed that the test steels after normalizing-quenching-tempering (N-QT) possessed the best strength-toughness combination and hardness uniformity compared with the conventional quenched-tempered (QT) steel. In addition, the test steel after austempering-tempering (A-T) demonstrated the worse hardness uniformity and lower yield strength while possessing relatively higher elongation (17%) compared with the samples after N-QT (14.5%) treatments. The better ductility of A-T steel mainly depended on the amount and morphology of retained austenite and thermal/deformation-induced twined martensite. This work elucidates the mechanisms of microstructure evolution during heat treatments and will highly improve the strength-toughness-hardness trade-off in large cross-section steels. PMID:29642642

Improvement of Strength-Toughness-Hardness Balance in Large Cross-Section 718H Pre-Hardened Mold Steel

Directory of Open Access Journals (Sweden)

Hanghang Liu

2018-04-01

Full Text Available The strength-toughness combination and hardness uniformity in large cross-section 718H pre-hardened mold steel from a 20 ton ingot were investigated with three different heat treatments for industrial applications. The different microstructures, including tempered martensite, lower bainite, and retained austenite, were obtained at equivalent hardness. The microstructures were characterized by using metallographic observations, scanning electron microscopy (SEM, transmission electron microscopy (TEM, X-ray diffraction (XRD, and electron back-scattered diffraction (EBSD. The mechanical properties were compared by tensile, Charpy U-notch impact and hardness uniformity tests at room temperature. The results showed that the test steels after normalizing-quenching-tempering (N-QT possessed the best strength-toughness combination and hardness uniformity compared with the conventional quenched-tempered (QT steel. In addition, the test steel after austempering-tempering (A-T demonstrated the worse hardness uniformity and lower yield strength while possessing relatively higher elongation (17% compared with the samples after N-QT (14.5% treatments. The better ductility of A-T steel mainly depended on the amount and morphology of retained austenite and thermal/deformation-induced twined martensite. This work elucidates the mechanisms of microstructure evolution during heat treatments and will highly improve the strength-toughness-hardness trade-off in large cross-section steels.

Remember Hard But Think Softly: Metaphorical Effects of Hardness/Softness on Cognitive Functions

Science.gov (United States)

Xie, Jiushu; Lu, Zhi; Wang, Ruiming; Cai, Zhenguang G.

2016-01-01

Previous studies have found that bodily stimulation, such as hardness biases social judgment and evaluation via metaphorical association; however, it remains unclear whether bodily stimulation also affects cognitive functions, such as memory and creativity. The current study used metaphorical associations between “hard” and “rigid” and between “soft” and “flexible” in Chinese, to investigate whether the experience of hardness affects cognitive functions whose performance depends prospectively on rigidity (memory) and flexibility (creativity). In Experiment 1, we found that Chinese-speaking participants performed better at recalling previously memorized words while sitting on a hard-surface stool (the hard condition) than a cushioned one (the soft condition). In Experiment 2, participants sitting on a cushioned stool outperformed those sitting on a hard-surface stool on a Chinese riddle task, which required creative/flexible thinking, but not on an analogical reasoning task, which required both rigid and flexible thinking. The results suggest the hardness experience affects cognitive functions that are metaphorically associated with rigidity or flexibility. They support the embodiment proposition that cognitive functions and representations can be grounded in bodily states via metaphorical associations. PMID:27672373

Capillary crystallization and molecular-replacement solution of haemoglobin II from the clam Lucina pectinata

International Nuclear Information System (INIS)

Gavira, José A.; Jesus, Walleska de; Camara-Artigas, Ana; López-Garriga, Juan; García-Ruiz, Juan M.

2006-01-01

The haemoglobin II from the clam L. pectinata has been crystallized using counter-diffusion in single capillary in the presence of agarose to improve crystal quality. Initial phases have been obtained by molecular replacement. Haemoglobin II is one of three haemoglobins present in the cytoplasm of the Lucina pectinata mollusc that inhabits the Caribbean coast. Using HBII purified from its natural source, crystallization screening was performed using the counter-diffusion method with capillaries of 0.2 mm inner diameter. Crystals of HbII suitable for data collection and structure determination were grown in the presence of agarose at 0.1%(w/v) in order to improve their quality. The crystals belong to the tetragonal space group P4 2 2 1 2, with unit-cell parameters a = b = 73.92, c = 152.35 Å, and diffracted X-rays to a resolution of better than 2.0 Å. The asymmetric unit is a homodimer with a corresponding Matthews coefficient (V M ) of 3.15 Å 3 Da −1 and a solvent content of 61% by volume

Characterization and function of carbonic anhydrases in the zooxanthellae-giant clam symbiosis.

Science.gov (United States)

Baillie, B K; Yellowlees, D

1998-03-22

Carbonic anhydrase (CA) has been purified from the host tissue of Tridacna gigas, a clam that lives in symbiosis with the dinoflagellate alga, Symbiodinium. At least two isoforms of CA were identified in both gill and mantle tissue. The larger (70 kDa) isoform is a glycoprotein with both N- and O-glycans attached and has highest homology to CAII. It is associated with the membrane fraction while the smaller (32 kDa) is present in the aqueous phase in both tissues. The 32 kDa CA has high homology with mammalian CAI at the N-terminus. Both isoforms cross-reacted with antibodies to CAII from chicken. Immunohistology demonstrated that the 70 kDa CA is present within the ciliated branchial filaments and cells lining the tertiary water channels in the gills of T. gigas. This is consistent with a role in the transport of inorganic carbon (Ci) to the haemolymph and therefore supply of Ci to the zooxanthellae. CA was also detected in mantle epithelial cells where it may also contribute to Ci supply to the zooxanthellae. The hyaline body and nerve tissue in the mantle express the 70 kDa CA where it may be involved in light sensing and nervous transmission.

Composition and Dynamics of the Nucleolinus, a Link between the Nucleolus and Cell Division Apparatus in Surf Clam (Spisula) Oocytes*

Science.gov (United States)

Alliegro, Mark C.; Hartson, Steven; Alliegro, Mary Anne

2012-01-01

The nucleolinus is a little-known cellular structure, discovered over 150 years ago (Agassiz, L. (1857) Contributions to the Natural History of the United States of America, First Monograph, Part IIL, Little, Brown and Co., Boston) and thought by some investigators in the late 19th to mid-20th century to function in the formation of the centrosomes or spindle. A role for the nucleolinus in formation of the cell division apparatus has recently been confirmed in oocytes of the surf clam, Spisula solidissima (Alliegro, M. A., Henry, J. J., and Alliegro, M. C. (2010) Proc. Natl. Acad. Sci. U.S.A. 107, 13718–13723). However, we know so little about the composition and dynamics of this compartment, it is difficult to construct mechanistic hypotheses or even to be sure that prior reports were describing analogous structures in the cells of mammals, amphibians, plants, and other organisms where it was observed. Surf clam oocytes are an attractive model to approach this problem because the nucleolinus is easily visible by light microscopy, making it accessible by laser microsurgery as well as isolation by common cell fractionation techniques. In this report, we analyze the macromolecular composition of isolated Spisula nucleolini and examine the relationship of this structure to the nucleolus and cell division apparatus. Analysis of nucleolinar RNA and protein revealed a set of molecules that overlaps with but is nevertheless distinct from the nucleolus. The proteins identified were primarily ones involved in nucleic acid metabolism and cell cycle regulation. Monoclonal antibodies generated against isolated nucleolini revealed centrosomal forerunners in the oocyte cytoplasm. Finally, induction of damage to the nucleolinus by laser microsurgery altered the trafficking of α- and γ-tubulin after fertilization. These observations strongly support a role for the nucleolinus in cell division and represent our first clues regarding mechanism. PMID:22219192

Composition and dynamics of the nucleolinus, a link between the nucleolus and cell division apparatus in surf clam (Spisula) oocytes.

Science.gov (United States)

Alliegro, Mark C; Hartson, Steven; Alliegro, Mary Anne

2012-02-24

The nucleolinus is a little-known cellular structure, discovered over 150 years ago (Agassiz, L. (1857) Contributions to the Natural History of the United States of America, First Monograph, Part IIL, Little, Brown and Co., Boston) and thought by some investigators in the late 19th to mid-20th century to function in the formation of the centrosomes or spindle. A role for the nucleolinus in formation of the cell division apparatus has recently been confirmed in oocytes of the surf clam, Spisula solidissima (Alliegro, M. A., Henry, J. J., and Alliegro, M. C. (2010) Proc. Natl. Acad. Sci. U.S.A. 107, 13718-13723). However, we know so little about the composition and dynamics of this compartment, it is difficult to construct mechanistic hypotheses or even to be sure that prior reports were describing analogous structures in the cells of mammals, amphibians, plants, and other organisms where it was observed. Surf clam oocytes are an attractive model to approach this problem because the nucleolinus is easily visible by light microscopy, making it accessible by laser microsurgery as well as isolation by common cell fractionation techniques. In this report, we analyze the macromolecular composition of isolated Spisula nucleolini and examine the relationship of this structure to the nucleolus and cell division apparatus. Analysis of nucleolinar RNA and protein revealed a set of molecules that overlaps with but is nevertheless distinct from the nucleolus. The proteins identified were primarily ones involved in nucleic acid metabolism and cell cycle regulation. Monoclonal antibodies generated against isolated nucleolini revealed centrosomal forerunners in the oocyte cytoplasm. Finally, induction of damage to the nucleolinus by laser microsurgery altered the trafficking of α- and γ-tubulin after fertilization. These observations strongly support a role for the nucleolinus in cell division and represent our first clues regarding mechanism.

Microbiological quality of soft, semi-hard and hard cheeses during the shelf-life

Directory of Open Access Journals (Sweden)

Josip Vrdoljak

2016-03-01

Full Text Available Cheeses as ready-to-eat food should be considered as a potential source of foodborne pathogens, primarily Listeria monocytogenes. The aim of present study was to determine the microbiological quality of soft, semi-hard and hard cheeses during the shelf-life, with particular reference to L. monocytogenes. Five types of cheeses were sampled at different timepoints during the cold storage and analyzed for presence of Salmonella and L. monocytogenes, as well as lactic acid bacteria, Escherichia coli, coagulase-positive staphylococci, yeasts, molds, sulfite-reducing clostridia and L. monocytogenes counts. Water activity, pH and NaCl content were monitored in order to evaluate the possibility of L. monocytogenes growth. Challenge test for L. monocytogenes was performed in soft whey cheese, to determine the growth potential of pathogen during the shelf-life of product. All analyzed cheeses were compliant with microbiological criteria during the shelf-life. In soft cheeses, lactic acid bacteria increased in the course of the shelf-life period (1.2-2.6 log increase, while in semi-hard and hard cheeses it decreased (1.6 and 5.2 log decrease, respectively. Soft cheeses support the growth of L. monocytogenes according to determined pH values (5.8-6.5, water activity (0.99-0.94, and NaCl content (0.3-1.2%. Challenge test showed that L. monocytogenes growth potential in selected soft cheese was 0.43 log10 cfu/g during 8 days at 4°C. Water activity in semi-hard and hard cheeses was a limiting factor for Listeria growth during the shelf-life. Soft, semi-hard and hard cheeses were microbiologically stable during their defined shelf-life. Good manufacturing and hygienic practices must be strictly followed in the production of soft cheeses as Listeria-supporting food and be focused on preventing (recontamination.

Analytical Modeling of Hard-Coating Cantilever Composite Plate considering the Material Nonlinearity of Hard Coating

Directory of Open Access Journals (Sweden)

Wei Sun

2015-01-01

Full Text Available Due to the material nonlinearity of hard coating, the coated structure produces the nonlinear dynamical behaviors of variable stiffness and damping, which make the modeling of hard-coating composite structure become a challenging task. In this study, the polynomial was adopted to characterize this material nonlinearity and an analytical modeling method was developed for the hard-coating composite plate. Firstly, to relate the hard-coating material parameters obtained by test and the analytical model, the expression of equivalent strain of composite plate was derived. Then, the analytical model of hard-coating composite plate was created by energy method considering the material nonlinearity of hard coating. Next, using the Newton-Raphson method to solve the vibration response and resonant frequencies of composite plate and a specific calculation procedure was also proposed. Finally, a cantilever plate coated with MgO + Al2O3 hard coating was chosen as study case; the vibration response and resonant frequencies of composite plate were calculated using the proposed method. The calculation results were compared with the experiment and general linear calculation, and the correctness of the created model was verified. The study shows the proposed method can still maintain an acceptable precision when the material nonlinearity of hard coating is stronger.

The need for sustainable technology diffusion in mining: Achieving the use of belt conveyor systems in the German hard-rock quarrying industry

Directory of Open Access Journals (Sweden)

Tobias Braun

2017-01-01

Full Text Available The movement of raw materials can be one of the most challenging tasks in open pit mining, with truck transportation representing the largest factor in mining costs and resulting in major greenhouse gas (GHG emissions. In this study, the transportation methods of bulk materials within German hard-rock open pit mines were investigated. Approximately 450 quarries were studied for their production tonnage, lease areas, mined rock type as well as mining methods and processing equipment. The results demonstrate that 90% of the operations use truck-based transportation methods, with the remainder relying partly or completely on continuous conveyor-based systems. The installation of continuous conveyors compared to trucks represents a real alternative because of reduced dead load, reduced GHG emissions and in many cases even reduced costs. Thus, for in-pit haulage in quarries sustainable technology substitutions exist that are yet to be adopted by the German quarrying industry. As this study shows, in the future the diffusion of sustainable technologies requires site champions and large-scale case studies that demonstrate their successful introduction in the mining value chain.

Simulation and analysis of the residual stresses in functionally graded Al2O3 coatings on CLAM steel

International Nuclear Information System (INIS)

Yan Zilin; Huang Qunying; Song Yong; Guo Zhihui; Wu Yican

2008-01-01

Alumina coatings on CLAM steel substrate are proposed to serve as tritium, corrosion and electric insulation barriers in the design of Dual Functional Lithium Lead Test Blanket Module (DFLL-TBM) in China in the frame of ITER. In order to avoid the crack failure due to thermal expansion mismatch of the coating and the substrate, the functionally graded materials (FGM) concept was adopted. In this paper, the residual thermal stresses in the coatings were calculated with the commercial software ANSYS. It is recommended that the compositional factor, numbers of the gradient interlayers and the thickness of the FGM zone are p=0.8, N=8, H=0.6 mm, respectively, according to the simulation results. These results could be helpful and theoretical guidance to the preparation and optimization of the coatings in the future. (authors)

Hardness and structure changes at surface in electrical discharge machined steel C 3840

International Nuclear Information System (INIS)

Karastojkovic, Z.; Janjusevic, Z.

2003-01-01

The electrical discharge machining (EDM) of both hard and soft materials became an important technique in industrial applications. This technique has an advantage in producing of structural/tool parts of complex geometry. The EDM is based on electrical phenomena, when the treated surface undergoes to erosion. The first step in EDM, the melting of thin surface layer, frequently is neglected. In this paper the changes of hardness and structure at surface layer, after EDM is applied on steel C 3840, will be discussed. The steel C- 3840 was quenched and tempered to hardness of 63 HRC, at surface, and than machined by electrical discharging. The changed, white, layer is just a product of melting and decarburization processes. The white layer is registered at surface by using a metallographic investigation. Hardness profile is measured from surface to the interior of material. The achievement of local high temperatures during EDM is resulting on melt and erosion of material. Besides of these effects, during EDM were happened some minor but not a neglectible effects, primary on structure changes on treated surface. It would be expected that melting, even an evaporation of melted metal, and further the phase transformation have an important influence on the starting structure. (Original)

Chemical hardness and density functional theory

Indian Academy of Sciences (India)

Unknown

RALPH G PEARSON. Chemistry Department, University of California, Santa Barbara, CA 93106, USA. Abstract. The concept of chemical hardness is reviewed from a personal point of view. Keywords. Hardness; softness; hard & soft acids bases (HSAB); principle of maximum hardness. (PMH) density functional theory (DFT) ...

Hardness variability in commercial technologies

International Nuclear Information System (INIS)

Shaneyfelt, M.R.; Winokur, P.S.; Meisenheimer, T.L.; Sexton, F.W.; Roeske, S.B.; Knoll, M.G.

1994-01-01

The radiation hardness of commercial Floating Gate 256K E 2 PROMs from a single diffusion lot was observed to vary between 5 to 25 krad(Si) when irradiated at a low dose rate of 64 mrad(Si)/s. Additional variations in E 2 PROM hardness were found to depend on bias condition and failure mode (i.e., inability to read or write the memory), as well as the foundry at which the part was manufactured. This variability is related to system requirements, and it is shown that hardness level and variability affect the allowable mode of operation for E 2 PROMs in space applications. The radiation hardness of commercial 1-Mbit CMOS SRAMs from Micron, Hitachi, and Sony irradiated at 147 rad(Si)/s was approximately 12, 13, and 19 krad(Si), respectively. These failure levels appear to be related to increases in leakage current during irradiation. Hardness of SRAMs from each manufacturer varied by less than 20%, but differences between manufacturers are significant. The Qualified Manufacturer's List approach to radiation hardness assurance is suggested as a way to reduce variability and to improve the hardness level of commercial technologies

Hard X-ray sources from miniature plasma focus devices

International Nuclear Information System (INIS)

Raspa, V.; Silva, P.; Moreno, J.; Zambra, M.; Soto, L.

2004-01-01

As first stage of a program to design a repetitive pulsed radiation generator for industrial applications, two miniature plasma foci have been designed and constructed at the Chilean commission of nuclear energy. The devices operate at an energy level of the order of tens of joules (PF-50 J, 160 nF capacitor bank, 20-35 kV, 32-100 J, ∼ 150 ns time to peak current) and hundred of joules (PF-400 J, 880 nF, 20-35 kV, 176-539 J, ∼ 300 ns time to peak current). Hard X-rays are being studied in these devices operating with hydrogen. Images of metallic plates with different thickness were obtained on commercial radiographic film, Agfa Curix ST-G2, in order to characterize the energy of the hard X-ray outside of the discharge chamber of PF-400 J. An effective energy of the order of 90 keV was measured under those conditions. X ray images of different metallic objects also have been obtained. (authors)

Hard X-ray sources from miniature plasma focus devices

Energy Technology Data Exchange (ETDEWEB)

Raspa, V. [Buenos Aires Univ., PLADEMA, CONICET and INFIP (Argentina); Silva, P.; Moreno, J.; Zambra, M.; Soto, L. [Comision Chilena de Energia Nuclear, Santiago (Chile)

2004-07-01

As first stage of a program to design a repetitive pulsed radiation generator for industrial applications, two miniature plasma foci have been designed and constructed at the Chilean commission of nuclear energy. The devices operate at an energy level of the order of tens of joules (PF-50 J, 160 nF capacitor bank, 20-35 kV, 32-100 J, {approx} 150 ns time to peak current) and hundred of joules (PF-400 J, 880 nF, 20-35 kV, 176-539 J, {approx} 300 ns time to peak current). Hard X-rays are being studied in these devices operating with hydrogen. Images of metallic plates with different thickness were obtained on commercial radiographic film, Agfa Curix ST-G2, in order to characterize the energy of the hard X-ray outside of the discharge chamber of PF-400 J. An effective energy of the order of 90 keV was measured under those conditions. X ray images of different metallic objects also have been obtained. (authors)

Study of surface integrity AISI 4140 as result of hard, dry and high speed machining using CBN

Science.gov (United States)

Ginting, B.; Sembiring, R. W.; Manurung, N.

2017-09-01

The concept of hard, dry and high speed machining can be combined, to produce high productivity, with lower production costs in manufacturing industry. Hard lathe process can be a solution to reduce production time. In lathe hard alloy steels reported problems relating to the integrity of such surface roughness, residual stress, the white layer and the surface integrity. AISI 4140 material is used for high reliable hydraulic system components. This material includes in cold work tool steel. Consideration election is because this material is able to be hardened up to 55 HRC. In this research, the experimental design using CCD model fit with three factors, each factor is composed of two levels, and six central point, experiments were conducted with 1 replications. The experimental design research using CCD model fit.

Upaya Memperkecil Kesenjangan Kompetensi Lulusan Sekolah Menengah Kejuruan dengan Tuntutan Dunia Industri

Directory of Open Access Journals (Sweden)

Nugroho Wibowo

2016-05-01

Full Text Available Vocational High Schools are concerned with human resources development to cope the requirements of fast developing market. Indonesian education is still not comprehensive as it emphasizes on the hard skills and neglects the soft skills and eventually the graduates find difficulty to compete in the workforce. In preparing competent human resources as expected by the industry, the prioritised programs to be undertaken by the Vocational High Schools are (1 conducting the teaching factory program; (2 collaborative programs with the industry that consist of: field practices, internship (on the job training, industrial visits, recruitments, industrial classes; and (3 stakeholders’ guidance related to workforce. Sekolah Menengah Kejuruan (SMK sebagai salah satu pemegang peranan penting dalam penyiapan tenaga kerja dituntut untuk selalu dapat mengikuti kebutuhan pasar yang terus berkembang. Sekolah yang ada di Indonesia belum membentuk lulusan yang mempunyai dua keterampilan yaitu hard skillsdan soft skillsdan pada akhirnya lulusannya akan sulit bersaing di dunia kerja.Dalam menyiapkan tenaga kerja yang berkompeten sesuai harapan industri, SMK dapat melaksanakan program-program kegiatan yaitu: (1 program teaching factory; (2 Jalinan kerjasama dengan industri yang berbentuk: pengelolaan prakerin yang baik, magang (on the job training, pengelolaan kunjungan industri, rekruitmen tenaga kerja, penyelenggaraan kelas industri; dan (3 Penyuluhan dan pembinaan dari stake holder terkait dengan ketenagakerjaan.

Development of the 'SEA-Clam' wave energy device for small scale use. Report for period 1st August 1983 - 31st March 1985

Energy Technology Data Exchange (ETDEWEB)

1985-03-01

The Report presented covers the work of the Sea Energy Associates Ltd./Coventry (Lanchester) Polytechnic Wave Energy Group on the development of the SEA Clam concept from a 290 metre long, 45 000 tonne displacement unit rated at 10 MW to a smaller unit, typically 500 to 1000 kW, for island or remote coastal communities. Productivity measurements, flexible bag development, and work on the Wells' turbine which has been concentrated on the outline design and costing of an engineered unit for this application are discussed.

Combined proteomic and metallomic analyses in Scrobicularia plana clams to assess environmental pollution of estuarine ecosystems.

Science.gov (United States)

González-Domínguez, Raúl; Santos, Hugo Miguel; Bebianno, Maria João; García-Barrera, Tamara; Gómez-Ariza, José Luis; Capelo, José Luis

2016-12-15

Estuaries are very important ecosystems with great ecological and economic value, but usually highly impacted by anthropogenic pressure. Thus, the assessment of pollution levels in these habitats is critical in order to evaluate their environmental quality. In this work, we combined complementary metallomic and proteomic approaches with the aim to monitor the effects of environmental pollution on Scrobicularia plana clams captured in three estuarine systems from the south coast of Portugal; Arade estuary, Ria Formosa and Guadiana estuary. Multi-elemental profiling of digestive glands was carried out to evaluate the differential pollution levels in the three study areas. Then, proteomic analysis by means of two-dimensional gel electrophoresis and mass spectrometry revealed twenty-one differential proteins, which could be associated with multiple toxicological mechanisms induced in environmentally stressed organisms. Accordingly, it could be concluded that the combination of different omic approaches presents a great potential in environmental research. Copyright © 2016 Elsevier Ltd. All rights reserved.

Layered Thermal Insulation Systems for Industrial and Commercial Applications

Science.gov (United States)

Fesmire, James E.

2015-01-01

From the high performance arena of cryogenic equipment, several different layered thermal insulation systems have been developed for industrial and commercial applications. In addition to the proven areas in cold-work applications for piping and tanks, the new Layered Composite Insulation for Extreme Environments (LCX) has potential for broader industrial use as well as for commercial applications. The LCX technology provides a unique combination of thermal, mechanical, and weathering performance capability that is both cost-effective and enabling. Industry applications may include, for example, liquid nitrogen (LN2) systems for food processing, liquefied natural gas (LNG) systems for transportation or power, and chilled water cooling facilities. Example commercial applications may include commercial residential building construction, hot water piping, HVAC systems, refrigerated trucks, cold chain shipping containers, and a various consumer products. The LCX system is highly tailorable to the end-use application and can be pre-fabricated or field assembled as needed. Product forms of LCX include rigid sheets, semi-flexible sheets, cylindrical clam-shells, removable covers, or flexible strips for wrapping. With increasing system control and reliability requirements as well as demands for higher energy efficiencies, thermal insulation in harsh environments is a growing challenge. The LCX technology grew out of solving problems in the insulation of mechanically complex cryogenic systems that must operate in outdoor, humid conditions. Insulation for cold work includes equipment for everything from liquid helium to chilled water. And in the middle are systems for LNG, LN2, liquid oxygen (LO2), liquid hydrogen (LH2) that must operate in the ambient environment. Different LCX systems have been demonstrated for sub-ambient conditions but are capable of moderately high temperature applications as well.

Analysis of hard coal quality for narrow size fraction under 20 mm

Science.gov (United States)

Niedoba, Tomasz; Pięta, Paulina

2018-01-01

The paper presents the results of an analysis of hard coal quality diversion in narrow size fraction by using taxonomic methods. Raw material samples were collected in selected mines of Upper Silesian Industrial Region and they were classified according to the Polish classification as types 31, 34.2 and 35. Then, each size fraction was characterized in terms of the following properties: density, ash content, calorific content, volatile content, total sulfur content and analytical moisture. As a result of the analysis it can be stated that the best quality in the entire range of the tested size fractions was the 34.2 coking coal type. At the same time, in terms of price parameters, high quality of raw material characterised the following size fractions: 0-6.3 mm of 31 energetic coal type and 0-3.15 mm of 35 coking coal type. The methods of grouping (Ward's method) and agglomeration (k-means method) have shown that the size fraction below 10 mm was characterized by higher quality in all the analyzed hard coal types. However, the selected taxonomic methods do not make it possible to identify individual size fraction or hard coal types based on chosen parameters.

Bioaccumulation of mercury in reared and wild Ruditapes philippinarum of a Mediterranean lagoon

Science.gov (United States)

Giani, Michele; Rampazzo, Federico; Berto, Daniela; Maggi, Chiara; Mao, Andrea; Horvat, Milena; Emili, Andrea; Covelli, Stefano

2012-11-01

The Marano and Grado lagoon, one of the largest wetlands in the Mediterranean Sea, has been subject to mercury contamination by industrial and mining activities. This must be considered a severe threat for Manila clam harvesting, which is an important fishing and commercial activity in the area. Contamination levels and potential risk for human consumption both in reared and wild clams collected from the lagoon were assessed by analyzing total mercury (THg) and methylmercury (MeHg) contents. In addition, relationships between THg and MeHg in sediments and in the bivalves were investigated. Increased bioaccumulation of THg but not of MeHg with increasing size of wild clam populations was observed at most sites. Higher concentrations both of THg (605 ± 210 ng g-1 ww) and MeHg (147 ± 37 ng g-1 ww) were detected in the eastern lagoon where the highest THg contents in sediments were observed as a consequence of the long-term supply of cinnabar rich suspended material from the Isonzo river. The variation of Hg content in seeded Manila clams during growth was monitored over a period of 18 months at two sites of the western sector of the lagoon. Results showed that the two areas were suitable for clam farming, with THg levels in reared bivalves always lower than the 0.5 mg kg-1 ww European Community limit. At the same time, as clams grew bigger in size, their THg and MeHg concentrations decreased, becoming lower than in the starting seeded pool. Reared clams presented lower THg (84 ± 55 ng g-1 ww) and MeHg (44.1 ± 24.6 ng g-1 ww) content than wild clams of the same commercial size (>30 mm). Based on a precautionary approach, intake of Hg and MeHg with the estimated clam consumption does not seem to constitute a risk for human health in the studied area.

Phyto-bioconversion of hard coal in the Cynodon dactylon/coal rhizosphere.

Science.gov (United States)

Igbinigie, Eric E; Mutambanengwe, Cecil C Z; Rose, Peter D

2010-03-01

Fundamental processes involved in the microbial degradation of coal and its derivatives have been well documented. A mutualistic interaction between plant roots and certain microorganisms to aid growth of plants such as Cynodon dactylon (Bermuda grass) on hard coal dumps has recently been suggested. In the present study coal bioconversion activity of nonmycorrhizal fungi was investigated in the C. dactylon/coal rhizosphere. Fungal growth on 2% Duff-agar, gutation formation on nitric acid treated coal and submerged culture activity in nitrogen-rich and -deficient broth formed part of the screening and selection of the fungi. The selected fungal isolates were confirmed to be found in pristine C. dactylon/coal rhizosphere. To simulate bioconversion, a fungal aliquot of this rhizosphere was used as inoculum for a Perfusate fixed bed bioreactor, packed with coal. The results demonstrate an enhanced coal bioconversion facilitated by low molecular weight organics and the bioconversion of coal may be initiated by an introduction of nitrogen moieties to the coal substrate. These findings suggest a phyto-bioconversion of hard coal involving plant and microbes occurring in the rhizosphere to promote the growth of C. dactylon. An understanding of this relationship can serve as a benchmark for coal dumps rehabilitation as well as for the industrial scale bioprocessing of hard coal.

Studying Hardness Meter Spring Strength to Understand Hardness Distribution on Body Surfaces.

Science.gov (United States)

Arima, Yoshitaka

2017-10-01

For developing a hardness multipoint measurement system for understanding hardness distribution on biological body surfaces, we investigated the spring strength of the contact portion main axis of a biological tissue hardness meter (product name: PEK). We measured the hardness of three-layered sheets of six types of gel sheets (90 mm × 60 mm × 6 mm) constituting the acupuncture practice pads, with PEK measurements of 1.96 N, 2.94 N, 3.92 N, 4.90 N, 5.88 N, 6.86 N, 7.84 N, 8.82 N, and 9.81 N of the main axis spring strength. We obtained measurements 10 times for the gel sheets and simultaneously measured the load using a digital scale. We measured the hardness distribution of induration embedded and breast cancer palpation models, with a main axis with 1.96 N, 4.90 N, and 9.81 N spring strengths, to create a two-dimensional Contour Fill Chart. Using 4.90 N spring strength, we could obtain measurement loads of ≤3.0 N, and the mean hardness was 5.14 mm. This was close to the median of the total measurement range 0.0-10.0 mm, making the measurement range the largest for this spring strength. We could image the induration of the induration-embedded model regardless of the spring strength. Overall, 4.90 N spring strength was best suited for imaging cancer in the breast cancer palpation model. Copyright © 2017. Published by Elsevier B.V.

Hard coal as a source of clean energy in Poland; Wegiel kamienny jako zrodlo czystej energii w Polsce

Energy Technology Data Exchange (ETDEWEB)

Ney, R.; Blaschke, W.; Lorenz, U.; Gawlik, L. [Mineral and Energy Economy Research Institute of the Polish Academy of Sciences (Poland)

2004-07-01

The paper addresses the issues and problems related to hard coal usage for energy production in Poland. These include coal quality, coal reserves, coal preparation, coal pricing, pollution regulations, and organisation and modernisation of the Polish power industry. 11 refs., 12 tabs.

Decomposition of insoluble and hard-to-degrade animal proteins by enzyme E77 and its potential applications.

Science.gov (United States)

Zhao, Hui; Mitsuiki, Shinji; Takasugi, Mikako; Sakai, Masashi; Goto, Masatoshi; Kanouchi, Hiroaki; Oka, Tatsuzo

2012-04-01

Insoluble and hard-to-degrade animal proteins are group of troublesome proteins, such as collagen, elastin, keratin, and prion proteins that are largely generated by the meat industry and ultimately converted to industrial wastes. We analyzed the ability of the abnormal prion protein-degrading enzyme E77 to degrade insoluble and hard-to-degrade animal proteins including keratin, collagen, and elastin. The results indicate that E77 has a much higher keratinolytic activity than proteinase K and subtilisin. Maximal E77 keratinolytic activity was observed at pH 12.0 and 65 °C. E77 was also adsorbed by keratin in a pH-independent manner. E77 showed lower collagenolytic and elastinolytic specificities than proteinase K and subtilisin. Moreover, E77 treatment did not damage collagens in ovine small intestines but did almost completely remove the muscles. We consider that E77 has the potential ability for application in the processing of animal feedstuffs and sausages.

Hard coatings on magnesium alloys by sputter deposition using a pulsed d.c. bias voltage

Energy Technology Data Exchange (ETDEWEB)

Reiners, G. [Bundesanstalt fuer Materialforschung und -pruefung, Berlin (Germany); Griepentrog, M. [Bundesanstalt fuer Materialforschung und -pruefung, Berlin (Germany)

1995-12-01

An increasing use of magnesium-based light-metal alloys for various industrial applications was predicted in different technological studies. Companies in different branches have developed machine parts made of magnesium alloys (e.g. cars, car engines, sewing and knitting machines). Hence, this work was started to evaluate the ability of hard coatings obtained by physical vapour deposition (PVD) in combination with coatings obtained by electrochemical deposition to protect magnesium alloys against wear and corrosion. TiN hard coatings were deposited onto magnesium alloys by unbalanced magnetron sputter deposition. A bipolar pulsed d.c. bias voltage was used to limit substrate temperatures to 180 C during deposition without considerable loss of microhardness and adhesion. Adhesion, hardness and load-carrying capacity of TiN coatings deposited directly onto magnesium alloys are compared with the corresponding values of TiN coatings deposited onto substrates which had been coated electroless with an Ni-P alloy interlayer prior to the PVD. (orig.)

Hard X-ray photoemission spectroscopy

International Nuclear Information System (INIS)

Kobayashi, Keisuke

2009-01-01

Except in the very early stage of the development of X-ray photoemission spectroscopy (XPS) by Kai Siegbahn and his coworkers, the excitation sources for XPS studies have predominantly been the Al Kα and Mg Kα emission lines. The advent of synchrotron radiation sources opened up the possibility of tuning the excitation photon energy with much higher throughputs for photoemission spectroscopy, however the excitation energy range was limited to the vacuum ultra violet and soft X-ray regions. Over the past 5-6 years, bulk-sensitive hard X-ray photoemission spectroscopy using high-brilliance high-flux X-rays from third generation synchrotron radiation facilities has been developed. This article reviews the history of HXPES covering the period from Kai Siegbahn and his coworkers' pioneering works to the present, and describes the fundamental aspects, instrumentation, applications to solid state physics, applied physics, materials science, and industrial applications of HXPES. Finally, several challenging new developments which have been conducted at SPring-8 by collaborations among several groups are introduced.

Zircaloy 4 ingots' industrial fabrication

International Nuclear Information System (INIS)

Leyt, A.

1987-01-01

The technology developed for the industrial fabrication of Zircaloy-4 ingots is presented. According to the results obtained: a) the homogeneity of the ingots is analyzed, regarding the distribution of components (tin, iron, chromium, oxygen) and Brinell hardness as a function of different types of charge: zirconium sponge-recycling alloy material, sponge of zirconium-alloy; b) the distribution of the same parameters as a function of production is also analyzed. (Author)

Induced spherococcoid hard wheat

International Nuclear Information System (INIS)

Yanev, Sh.

1981-01-01

A mutant has been obtained - a spheroccocoid line -through irradiation of hard wheat seed with fast neutrons. It is distinguished by semispherical glumes and smaller grain; the plants have low stem with erect leaves but with shorter spikes and with lesser number of spikelets than those of the initial cultivar. Good productive tillering and resistance to lodging contributed to 23.5% higher yield. The line was superior to the standard and the initial cultivars by 14.2% as regards protein content, and by up to 22.8% - as to flour gluten. It has been successfully used in hybridization producing high-yielding hard wheat lines resistant to lodging, with good technological and other indicators. The possibility stated is of obtaining a spherococcoid mutant in tetraploid (hard) wheat out of the D-genome as well as its being suited to hard wheat breeding to enhance protein content, resistance to lodging, etc. (author)

Comparison of local and imported osteosynthetic mandibular bone plates in terms of micro hardness in modified simulated body fluid at periodic intervals

International Nuclear Information System (INIS)

Anwar, R.; Kaleem, M.; Baig, AM.; Jamal, M.

2015-01-01

To determine the micro hardness of novel Pakistani manufactured osteosynthetic titanium bone mini plates (MPP) and imported osteosynthetic titanium bone mini plates (MPG) in body like conditions. Study Design: Descriptive study. Place and Duration of Study: This study was carried out at School of Chemical and Material Engineering, NUST from March to May 2013. Material and Methods: Microvicker hardness tester was used for assessment of micro hardness of two types of plates. The hardness was checked before conditioning and after conditioning at (six different places) on interval of 1, 7,14,21,28 and 40 days in modified simulated body fluid with ph 7.4 and temperature 37 degree C. Results: Result showed that hardness of MPG was higher than MPP and after conditioning in simulated body fluid at all time periods, hardness of both types of plates was increased. Conclusion: It can be concluded from this study that micro hardness of imported plates is more than local plates so recommendations should be sent to manufacturers of local industry of Pakistan to improve the hardness of local plates so that they can meet international standards. (author)

P.C. disposal decisions: a banking industry case study

Science.gov (United States)

Shah, Sejal P.; Sarkis, Joseph

2002-02-01

The service industry and the manufacturing industry are interlinked in a supply chain situation. Part of the effectiveness of some manufacturing industry environmental performance based on remanufacturing and recycling is dependent on service industry decisions. In the information technology arena, personal computers (PCs) are the hard equipment of the service industry. The end-of-life decisions made by the service industry, and in this case the banking industry will have implications for the amount of systems within the waste or reverse logistics stream for manufacturers. Looking at some of the issues (and presenting a model for evaluation) related to decision making concerning end-of-life disposition for PCs is something this paper investigates. The analytical hierarchy process (AHP) is applied in this circumstance. The development of the model, its application, and results, provide the basis for much of the discussion in this paper.

2TB hard disk drive

CERN Multimedia

This particular object was used up until 2012 in the Data Centre. It slots into one of the Disk Server trays. Hard disks were invented in the 1950s. They started as large disks up to 20 inches in diameter holding just a few megabytes (link is external). They were originally called "fixed disks" or "Winchesters" (a code name used for a popular IBM product). They later became known as "hard disks" to distinguish them from "floppy disks (link is external)." Hard disks have a hard platter that holds the magnetic medium, as opposed to the flexible plastic film found in tapes and floppies.

Janka hardness using nonstandard specimens

Science.gov (United States)

David W. Green; Marshall Begel; William Nelson

2006-01-01

Janka hardness determined on 1.5- by 3.5-in. specimens (2×4s) was found to be equivalent to that determined using the 2- by 2-in. specimen specified in ASTM D 143. Data are presented on the relationship between Janka hardness and the strength of clear wood. Analysis of historical data determined using standard specimens indicated no difference between side hardness...

Physics and Industrial Development - Proceedings of the 2nd International Conference on Physics and Industrial Development

Science.gov (United States)

Gazzinelli, R.; Moreira, R. L.; Rodrigues, W. N.

1997-04-01

The Table of Contents for the full book PDF is as follows: * Preface * Sponsors * Committees * Opening Lecture * Relations between Science and Industry in Brazil * Technological Change and Economic Development * Science and Economic Development * Recent Technological Change and Industrial Dynamics * Technology and Economic Development: Suitability of the Institutional System of Minais Gerais * Bridging the Gap * Transfer of Scientific Results into Industry: A Controversial Problem in Central and Eastern Europe * Bridging the Gap Between Basic Research and Industrial Development at the J. STEFAN Institute * Liquid Crystals: A Case Study of the Interaction Between Science and Application * Role of Physics in the Modern Industrialization Process of Korea * Research in Industry * A Theoretical Physicist's 21-Year Experience in the Argentine Industry * Four Characters in Search of a Profession * Status and Prospects for the Use of Renewable Sources of Energy in Minas Gerais State-Brazil * University-Industry Cooperation I * Development and Industrialization of Fiber Optics Metrology Equipment * Finnish Experiences on University-Industry Collaboration in Materials Science and Physical Metallurgy * A Conceptual Framework for Understanding the Interaction between Academic Research and Industry * Technological Modernization of the Alkaline Cooking Process for the Production of Masa and Tortilla * The Fapergs Program on University Versus Private Enterprise * Integral Development Centers: Tying Mexican Industry With the National Polytechnic Institute * Materials Characterization and Applied Physics * Imaging Manganese Sulfide Inclusions in Grain Oriented Silicon Steels * Electrical Resistivity Changes Associated to Static Strain Aging in High Carbon Steel * PVD Hard Coatings for Wear Applications * Scanning Acoustic Microscopy: Application to Porous Materials * Indentation Testing of Thennal Sprayed WC-Co * Applications of Capillary Electrophoresis with Laserinduced

Investment attractiveness as a factor in the tourism industry development in Zaporozhye region

OpenAIRE

Анастасія Павлівна Безхлібна

2016-01-01

The article examines the concept of investment attractiveness of the tourism industry in Zaporozhye region; soft and hard impacts of investment attractiveness of the tourism industry in Zaporozhye region are revealed and analyzed. The SWOT-analysis of investment attractiveness of the tourism industry is revealed; recommendations are given for revealed weaknesses and threats to the prospects of tourism development in Zaporozhye region by the attracting investment mechanisms, using SWOT-analysis 

Automation of microfactories: towards using small industrial robots

DEFF Research Database (Denmark)

Eriksson, Torbjörn Gerhard; Hansen, Hans Nørgaard; Mazzola, Stefano

2005-01-01

with tweezers under a microscope. This is tedious work for the operators and it is very hard to keep an even quality. This process would be excellent to automate, for example by using small industrial robots. There are mainly two properties that are significant for selecting a robot for micro...

Hard coal; Steinkohle

Energy Technology Data Exchange (ETDEWEB)

Loo, Kai van de; Sitte, Andreas-Peter [Gesamtverband Steinkohle e.V. (GVSt), Herne (Germany)

2015-07-01

International the coal market in 2014 was the first time in a long time in a period of stagnation. In Germany, the coal consumption decreased even significantly, mainly due to the decrease in power generation. Here the national energy transition has now been noticable affected negative for coal use. The political guidances can expect a further significant downward movement for the future. In the present phase-out process of the German hard coal industry with still three active mines there was in 2014 no decommissioning. But the next is at the end of 2015, and the plans for the time after mining have been continued. [German] International war der Markt fuer Steinkohle 2014 erstmals seit langem wieder von einer Stagnation gekennzeichnet. In Deutschland ging der Steinkohlenverbrauch sogar deutlich zurueck, vor allem wegen des Rueckgangs in der Stromerzeugung. Hier hat sich die nationale Energiewende nun spuerbar und fuer die Steinkohlennutzung negativ ausgewirkt. Die politischen Weichenstellungen lassen fuer die Zukunft eine weitere erhebliche Abwaertsbewegung erwarten. Bei dem im Auslaufprozess befindlichen deutschen Steinkohlenbergbau mit noch drei aktiven Bergwerken gab es 2014 keine Stilllegung. Doch die naechste steht zum Jahresende 2015 an, und die Planungen fuer die Zeit nach dem Bergbau sind fortgefuehrt worden.

Study on the Effect of Heavy metals toxicity according to changing Hardness concentration using D.magna

Science.gov (United States)

Chun Sang, H.

2016-12-01

n order to determine and prevent the number of ecological effects of heavy metals in the materials, we have to accurately measure the heavy metals present in the water-based protection ecosystems and may determine the effects to humans. Heavy metals occurred in the industrial effluent which is a state in which the monitor, based on the emission standards are made by the Ministry of Environment and managed and waste water contained Copper, Zinc, lead, etc. These heavy metals are able to express the toxic effects only when present in the free-ions in the aqueous condition, which appears differently affected by the degree to hardness change in accordance with the season, precipitation. Generally changing hardness concentration can not precisely evaluate toxic effects of heavy metals in the water system. Anderson announced a study on bioassay for heavy metals from industrial waste water using Daphnia magna(Anderson, 1944, 1948). Breukelman published study the resitivity difference for the mercury Chloride(HgCl2). Braudouin(1974) compared the zooplankton(Daphnia sp.) acute toxicity of the different heavy metals and confirmed the sensitivity. Shcherban(1979) presented for toxicity evaluation results for the heavy metal of the Daphnia magna according to different temperature conditions. In the United States Environmental Protection Agency(EPA) established a standard test method for water fleas, managed and supervised water ecosystems, and announced the adoption of a bioassay standard method. This study was performed to evaluate acute inhibition using the Daphnia magna for the biological effect of heavy metal ions in water-based toxicity in the hardness change. Evaluation methods were conducted in EPA Water Quality process test criteria. TU(Toxic Unit), NOEC (No Observable Effect Concentration), LOEC (Lowest Observable Effect Concentration), EC50 (Median Effective Concentration) was calculated by Toxcalc 5.0 Program. Keywords : D. magna, Hardness, Toxic Unit, Heavy metal

Prospects for revitalization of the U.S. nuclear energy industry

International Nuclear Information System (INIS)

Colvin, Joe F.

1998-01-01

Today I want to make two key points about the U.S. nuclear energy industry. First, key policy issues are beginning to converge in a way that is very positive for our industry - and for society as a whole. And Second, the industry has worked hard to prepare for the future - and we are ready to make the most of these positive developments. Nuclear energy's prospects are the brightest they have been at any time in history. The plan identifies the building blocks that must be in place before utilities start building the next generation of nuclear plants. One, we wanted to improve the efficiency and reliability of our operating nuclear plants. Two, we wanted to establish a regulatory framework for license renewal. Three, we wanted to develop a more efficient licensing process for new plants. In closing, I am confident that the 21st century will bring a renaissance for nuclear energy-in the United States and around the world. The U.S. nuclear energy industry has a renewed vitality and sense of mission today. We've worked hard preparing for the future- and we will continue to be strong players in worldwide energy policy development in the 21st century. (Cho, G. S.)

Threatened and Endangered Species on Army Installations: A MACOM Report.

Science.gov (United States)

1997-12-01

cragini (C) ONSITE Fish Greenback Cutthroat Trout, Oncorhynchus clarki stomias (T) Restrictions Expenditures Plants Ute Ladies’-tresses, Spiranthes...Obovaria retusa Ring Pink (E) Clam Ft. Campbell FORSCOM 102 USACERL TR-98/18 Oncorhynchus clarki stomias Greenback Cutthroat Trout (T) Fish Ft. Carson...IMPACT: Units may not construct hard surfaces during active period unless survey is completed. Otherwise no impact. ONCORHYNCHUS CLARKI STOMIAS FT

NOAA Surveys; Stabalizing Economy and Ecology on The U.S. Coast

Science.gov (United States)

Hylton, L. L.

2008-12-01

NOAA TEACHER AT SEA: LISHA LANDER HYLTON ONBOARD NOAA SHIP: DELAWARE II JUNE 29TH -JULY 11TH, 2008 MISSION: The mission of my trip with NOAA was to provide me (a teacher of third grade students) an extraordinary opportunity to take part in genuine-world experiences being conducted by NOAA in order for me to achieve a clearer insight into our ocean planet and a superior perceptive of NOAA-related careers. With the knowledge that I obtained on-board THE DELAWAREII - I am now able to teach the lesson plans created on my field study to my students, giving them insight as to how much power they have on their lives and this world we live in. My students are able to play a part in maritime activities as we study together, valuing the work and expertise that is required to sustain oceanic and atmospheric research. The students' enthusiasm, inquisitiveness and yearning to learn is only heightened with the hands-on, motivational activities that I gained from my research with this NOAA team. As a Part of this NOAA team, on-board we conducted clam surveys at various stations along the northeastern coast of the United States. I learned that clams are a very important part of economy and ecology in this region. Surveying clams and other marine species was performed on my field study with NOAA for the purpose of conserving marine life. NOAA realizes the importance of the fishing industry and conducts fishery surveys in order to stabilize fishery industries without destroying the marine ecosystems completely. Clams play a very important part in marine fishery; therefore these surveys are helping to maintain stability in the economy and ecology of The United States. By comparing past and present fishery surveys, our team made conclusions regarding the stability of these marine populations. After dredging, collecting, sorting, counting, measuring and weighing (clams with shells and shucked clam meat only) - the data was obtained and recorded then entered into computers filed under

Microstructure and hardness performance of AA6061 aluminium composite using friction stir processing

Science.gov (United States)

Marini, C. D.; Fatchurrohman, N.

2018-04-01

Rice husk ash (RHA) is an industrial waste that has become a potential reinforced material for aluminium matrix composite (AMCs) due to low cost and abundantly available resources. Friction stir processing (FSP) has been introduced as a method to modify surface properties of the metal and alloy including theirs composite as well. The present work reports the production and characterization of AA6061 and AA6061/5 vol% RHA using FSP using parameters rotation speed 1000 rpm and traversed speed 25 mm/min. The microstructure was studied using optical microscopy (OM). A homogenous dispersion of RHA particles was obtained in the composite. No agglomeration or segregation was observed. The produced composite exhibited a fine grain structure. An improvement in hardness profile was observed as AA6061/5 vol% RHA improves in hardness compared to FSPed of AA6061 without reinforcement.

Highly hard yet toughened bcc-W coating by doping unexpectedly low B content

KAUST Repository

Yang, Lina

2017-08-18

Either hardness or toughness has been the core interest in scientific exploration and technological pursuit for a long time. However, it is still a big challenge to enhance the hardness and toughness at the same time, since the improvement of one side is always at the expense of the other one. Here, we have succeeded in dealing with this pair of conflict based on tungsten (W) coating by doping boron (B) via magnetron co-sputtering. The results reveal that the introduction of low concentrations of B (6.3 at. %), in the doping regime, leads to the formation of W(B) supersaturated solid solution with refined grains. Meanwhile, the doping-induced higher compressive stress, higher H/E* and denser microstructure result in a surprising combination of improved hardness (2 × larger than pure W) and superior toughness (higher crack formation threshold compared to pure W). We believe this is an innovative sight to design new generation of transition-metal-based multifunctional coatings. Besides, our results are applicable for industrial application because it can be realized by simple manufacturing approaches, e.g. magnetron sputtering technology.

IMPROVING THE HARD SKILLS AND SOFT SKILLS OF MADRASAH TEACHERS FOR DEALING ASEAN ECONOMIC COMMUNITY (AEC

Directory of Open Access Journals (Sweden)

Laely Mahmudah

2016-11-01

Full Text Available ASEAN Economic Community (AEC has been started rolling. Market competition, industry, and skilled workers, especially in the field of education are becoming increasingly stringent. Madrasah teachers as the front liners in the education process should improve the quality of human resources. Hard skills and soft skills of madrasah teachers must be improved to deal with the Asean Economic Community (AEC. Hard skills are academic skills that include pedagogic competence and professional competence. How to improve the hard skills is to meet the pedagogic competence (ability to manage learning students and professional competence (the ability to master the learning material is broad and deep. Soft skills is the ability to organize themselves (intrapersonal skills, such as creativity, motivation, and self-contained and the ability to interact with others (interpersonal skills, such as communication, team building and adaptation to maximize performance. Soft skills include personal competence and social competence. Madrasah teachers should be able to change the mindset of a passenger became good driver. Professional madrasah teachers are teachers who have the balanced hard skills and soft skills, which can compete healthily in AEC era.

Enhanced electrical conductivity and hardness of silver-nickel composites by silver-coated multi-walled carbon nanotubes

International Nuclear Information System (INIS)

Lee, Dongmok; Sim, Jeonghyun; Baik, Seunghyun; Kim, Wonyoung; Moon, Chuldong; Cho, Wookdong

2015-01-01

We investigated electrical conductivity and Vickers hardness of Ag- and Ni-based composites prepared by powder metallurgy involving spark plasma sintering. The starting composition was Ag:Ni = 61:39 vol%, which provided an electrical conductivity of 3.30 × 10"5 S cm"−"1 and a hardness of 1.27 GPa. The addition of bare multi-walled carbon nanotubes (MWNTs, 1.45 vol%) increased hardness (1.31 GPa) but decreased electrical conductivity (2.99 × 10"5 S cm"−"1) and carrier mobility (11 cm"2 V"−"1 s"−"1) due to the formation of Ni_3C in the interface between the MWNTs and Ni during spark plasma sintering. The formation of Ni_3C was prevented by coating the surface of the nanotubes with Ag (nAgMWNTs), concomitantly increasing electrical conductivity (3.43 × 10"5 S cm"−"1) and hardness (1.37 GPa) of the sintered specimen (Ag:Ni:nAgMWNTs = 59.55:39:1.45 vol%). The electrical contact switching time (133 357) was also increased by 30%, demonstrating excellent feasibility as electrical contact materials for electric power industries. (paper)

Multilayer coatings containing diamond and other hard materials on hardmetal substrates

International Nuclear Information System (INIS)

Koepf, A.; Haubner, R.; Lux, B.

2001-01-01

In order to improve the wear resistance of hardmetal cutting tools, coatings of hard materials were established. Especially the production of multilayer coatings, which combine useful properties of different materials was a topic of industrial and academic research. The present work examined the possibilities of combining diamond as basic layer with protective CVD layers of TiC, TiN, Ti(C,N) and Al 2 O 3 . All these combinations could be realized and some showed quite good adherence under strain, which offers possibilities for technical applications. (author)

Nanocoatings for High-Efficiency Industrial Hydraulic and Tooling Systems

Energy Technology Data Exchange (ETDEWEB)

None

2009-05-01

This factsheet describes a research project whose goal is to develop degradation-resistant nano-coatings of AlMgB14 and AlMgB14– (titanium diboride) TiB2 that result in improved surface hardness and reduced friction for industrial hydraulic and tooling systems.

[Carbon, nitrogen, and phosphorus budgets of bottom-cultured clam Ruditapes philippinarum].

Science.gov (United States)

Zhang, Sheng-li; Zhang, An-guo; Yuan, Xiu-tang; Liang, Bin; Liu, Shu-xi

2015-04-01

In order to elucidate the role of bottom-cultured clams in the coastal nutrient cycle, the seasonal filtration, ingestion and biodeposition rates were in situ measured and carbon (C), nitrogen (N) and phosphorus (P) budgets of Ruditapes philippinarum among four seasons were modeled. The results showed that the scope for growth of R. philippinarum in carbon (SFG(C)), nitrogen (SFG(N)), and phosphorus (SFG(P)) all varied significantly among seasons, with the highest values in spring. Meanwhile, SFG(C) was negative in summer, SFG(N) and SFG(P) were always positive throughout the year. The seasonal variations of SFG(C), SFG(N) and SFG(P) were -3.94-49.82 mg C x ind(-1) x d(-1), 0.72-9.49 mg N x ind(-1) x d(-1), and 0.15-3.06 mg P x ind(-1) x d(-1), respectively. The net growth efficiencies in carbon (K(C2)), nitrogen (K(N2)), and phosphorus (K(P2)) also showed a distinct seasonal pattern among seasons, and ranked as K(P2) > K(N2) > K(C2). The C, N, and P budgets illustrated that the R. philippinarum population relatively used more N and P than C for growth and efficiently transferred the pelagic primary production to a higher trophic level. The current study suggested that R. philippinarum bottom-cultured at large scale might play a dominant role in the nutrient cycle of the coastal ecosystem and should be considered as an important ecological component in coastal areas.

Recent developments in hard magnetic materials

International Nuclear Information System (INIS)

Asti, G.

1989-01-01

Hard magnetic materials find ever-increasing uses in modern technology. Their importance is mainly in the domain of permanent magnets, but a variety of other applications is being offered to this class of materials, especially for what regards the areas of information storage, telecommunications and special electronic devices. These developments are connected to the emphasis that is more and more given to thin films having high magnetic anisotropy. The recent advancement in the field of hard magnetic materials is among the best examples where technology depends to a great extent upon the continuous progress in the scientific knowledge. The research activity is characterized by the introduction of new classes of materials and continuous improvements in the preparation techniques both for what regards industrial processing and method for obtaining high quality materials in form of crystals, films or amorphous specimens. In this respect a special place must be reserved to rare earth transition metal compounds, a class of materials that attracted enormeous attention after the discovery by Hoffer and Strnat in 1966 of the large uniaxial magnetocrystalline anisotropy of the compound YCo 5 . Beside the so called 1:5 phase, other compositions of technical importance are the 2:17 and the recently discovered Nd 2 Fe 14 B, which is a real new ternary phase having tetragonal crystal structure. Great efforts have been done to gain a better understanding of the magnetic anisotropy and its relationship to the coercivity is of leading importance for a further development in this important area of magnetism. (orig.)

Assessing toxicant effects in a complex estuary--A case study of effects of silver on reproduction in the bivalve, Potamocurbula amurensis, in San Francisco Bay

Science.gov (United States)

Brown, Cynthia L.; Parchaso, Francis; Thompson, Janet K.; Luoma, Samuel N.

2003-01-01

Contaminant exposures in natural systems can be highly variable. This variability is superimposed upon cyclic variability in biological processes. Together, these factors can confound determination of contaminant effects. Long term, multidisciplined studies with high frequency sampling can be effective in overcoming such obstacles. While studying trace metal contamination in the tissues of the clam, Potamocorbula amurensis, in the northern reach of San Francisco Bay, an episode of high Ag concentrations was identified (maximum of 5.5 µg g−1) at two mid-estuary sites. High concentrations were not seen in clams up-estuary (maximum of 1.92 µg g−1) from these sites and were reduced down-estuary (maximum of 2.67 µg g−1). Silver is not common naturally in the environment, so its elevated presence is usually indicative of anthropogenic influences such as municipal and industrial discharge. Monthly sampling of reproductive status of clams characterized the reproductive cycle and differences in the patterns of reproductive activity that corresponded to changes in Ag tissue concentrations. The proportion of reproductive clams was less than 60% during periods when tissue concentrations were high (generally >2 µg g−1). When tissue concentrations of Ag decreased (≤1 µg g−1), the proportion of reproductive clams was 80 to 100%. A comparison between the annual proportion of reproductive clams and annual Ag tissue concentrations showed a significant negative correlation. No other measured environmental variables were correlated with reproductive impairment. The weight-of-evidence approach strongly supports a cause and effect relationship between Ag contamination and reduced reproductive activity in P. amurensis.

Assessing toxicant effects in a complex estuary: A case study of effects of silver on reproduction in the bivalve, Potamocorbula amurensis, in San Francisco Bay

Science.gov (United States)

Brown, C.L.; Parchaso, F.; Thompson, J.K.; Luoma, S.N.

2003-01-01

Contaminant exposures in natural systems can be highly variable. This variability is superimposed upon cyclic variability in biological processes. Together, these factors can confound determination of contaminant effects. Long term, multidisciplined studies with high frequency sampling can be effective in overcoming such obstacles. While studying trace metal contamination in the tissues of the clam, Potamocorbula amurensis, in the northern reach of San Francisco Bay, an episode of high Ag concentrations was identified (maximum of 5.5 ??g g-1) at two mid-estuary sites. High concentrations were not seen in clams up-estuary (maximum of 1.92 ??g g-1) from these sites and were reduced down-estuary (maximum of 2.67 ??g g-1). Silver is not common naturally in the environment, so its elevated presence is usually indicative of anthropogenic influences such as municipal and industrial discharge. Monthly sampling of reproductive status of clams characterized the reproductive cycle and differences in the patterns of reproductive activity that corresponded to changes in Ag tissue concentrations. The proportion of reproductive clams was less than 60% during periods when tissue concentrations were high (generally >2 ??g g-1). When tissue concentrations of Ag decreased (???1 ??g g-1), the proportion of reproductive clams was 80 to 100%. A comparison between the annual proportion of reproductive clams and annual Ag tissue concentrations showed a significant negative correlation. No other measured environmental variables were correlated with reproductive impairment. The weight-of-evidence approach strongly supports a cause and effect relationship between Ag contamination and reduced reproductive activity in P. amurensis.

Morphometry, growth and reproduction of an Atlantic population of the razor clam Ensis macha (Molina, 1782

Directory of Open Access Journals (Sweden)

Pedro J. Barón

2004-06-01

Full Text Available Ensis macha is a razor clam distributed throughout the coasts of southern Argentina and Chile. Even though it represents a valuable fishery resource, the exploitation of its Atlantic populations has begun only in recent years. This study provides the first estimates of growth rate, an interpretation of the reproductive cycle on the coast of the northern Argentine Patagonia and an analysis of the species morphometry. Growth was estimated by direct observation of growth rings on the valves by two observers. The reproductive cycle was interpreted by the analysis of temporal change of oocyte size frequency distributions. Parameter estimations for the von Bertalanffy equations respectively obtained by observers 1 and 2 were 154 and 153.7 mm for L?, 0.25 and 0.20 yr-1 for k, and -0.08 and -0.72 yr for t0. Two spawning peaks were detected: September-November 1999 and May-June 2000. However, mature females were found all year round. An abrupt change in the relationship between shell length and height was detected at 11.2 mm length.

On scale dependence of hardness

International Nuclear Information System (INIS)

Shorshorov, M.Kh.; Alekhin, V.P.; Bulychev, S.I.

1977-01-01

The concept of hardness as a structure-sensitive characteristic of a material is considered. It is shown that in conditions of a decreasing stress field under the inventor the hardness function is determined by the average distance, Lsub(a), between the stops (fixed and sessile dislocations, segregation particles, etc.). In the general case, Lsub(a) depends on the size of the impression and explains the great diversity of hardness functions. The concept of average true deformation rate on depression is introduced

Induction of Symbiosis in Tridacna crocea (C. Bivalvia, F. Tridacnidae Using Zooxanthellae from T. gigas and from T. crocea: Effects on Clam Survival and Growth

Directory of Open Access Journals (Sweden)

S. Suzanne Mingoa-Licuanan

2000-12-01

Full Text Available Survival and growth of post-metamorphic Tridacna crocea juveniles were improved by inducing symbiosis with fresh or cloned zooxanthellae (Tg10 derived from T. gigas. Although clam growth was best with Tc4, survival was also poorest. Symbiosis with specific zooxanthellae was established at the pediveliger stage, with reinfection a few days after. It is suggested that while survival and growth may be easily monitored and may be used as indicators of good performance of a functional holobiont, other phenotypic traits such as resistance to disease, bleaching, etc. may also be considered in evaluating the effectivity of the selected zooxanthellae.

Methods of improvement in hardness of composite surface layer on cast steel

Directory of Open Access Journals (Sweden)

J. Szajnar

2008-08-01

Full Text Available The paper presents a method of usable properties of surface layers improvement of cast carbon steel 200–450, by put directly in founding process a composite surface layer on the basis of Fe-Cr-C alloy and next its remelting with use of welding technology TIG – Tungsten Inert Gas. Technology of composite surface layer guarantee mainly increase in hardness and abrasive wear resistance of cast steel castings on machine elements. This technology can be competition for generally applied welding technology (surfacing by welding and thermal spraying. However the results of studies show, that is possible to connection of both methods founding and welding of surface hardening of cast steel castings. In range of experimental plan was made test castings with composite surface layer, which next were remelted with energy 0,8 and 1,6 kJ/cm. Usability for industrial applications of test castings was estimated by criterion of hardness and abrasive wear resistance of type metal-mineral.

Micro-hardness of non-irradiated uranium dioxide

International Nuclear Information System (INIS)

Kim, Sung-Sik; Takagi, Osamu; Obata, Naomi; Kirihara, Tomoo.

1983-01-01

In order to obtain the optimum conditions for micro-hardness measurements of sintered UO 2 , two kinds of hardness tests (Vickers and Knoop) were examined with non-irradiated UO 2 of 2.5 and 5 μm in grain size. The hardness values were obtained as a function of the applied load in the load range of 25 -- 1,000 g. In the Vickers test, cracks were generated around the periphery of an indentation even at lower load of 50 g, which means the Vickers hardness is not suitable for UO 2 specimens. In the Knoop test, three stages of load dependence were observed for sintered pellet as well as for a single crystal by Bates. Load dependence of Knoop hardness and crack formation were discussed. In the range of applied load around 70 -- 100 g there were plateau region where hardness values were nearly unchanged and did not contain any cracks in the indentation. The plateau region represents a hardness of a specimen. From a comparison between the hardness values of 2.5 μm and those of 5 μm UO 2 , it was approved that the degree of sintering controls the hardness in the plateau region. (author)

Can the hemoglobin characteristics of vesicomyid clam species influence their distribution in deep-sea sulfide-rich sediments? A case study in the Angola Basin

Science.gov (United States)

Decker, C.; Zorn, N.; Le Bruchec, J.; Caprais, J. C.; Potier, N.; Leize-Wagner, E.; Lallier, F. H.; Olu, K.; Andersen, A. C.

2017-08-01

Vesicomyids live in endosymbiosis with sulfur-oxidizing bacteria and therefore need hydrogen sulfide to survive. They can nevertheless live in a wide range of sulfide and oxygen levels and depths, which may explain the exceptional diversity of this clam family in deep-sea habitats. In the Gulf of Guinea, nine species of vesicomyid clams are known to live in cold-seep areas with pockmarks from 600 to 3200 m deep, as well as in the organic-rich sediments of the Congo deep-sea fan at 5000 m deep. Our previous study showed that two species living in a giant pockmark have different oxygen carriers, suggesting different adaptations to hypoxia. Here, we studied the hemoglobin structure and oxygen affinity in three other species, Calyptogena valdiviae, Elenaconcha guiness and Abyssogena southwardae to determine whether the characteristics of their oxygen carriers contribute to their distribution in sulfide-rich sediments at a regional scale. Documenting pairwise species associations in various proportions, we give a semi-quantitative account of their local distribution and oxygen and sulfide measurements at seven sites. Mass spectrometry showed that each vesicomyid species has four intracellular monomeric hemoglobin molecules of 15-16 kDa, all differing in their molecular mass. As expected, the monomers showed no cooperativity in oxygen binding. Their oxygen affinities were very high (below 1 Torr), but differed significantly. C. valdiviae had the highest affinity and was dominant in the Harp pockmark, the site with the lowest oxygen content (half the value of fully oxygenated water). A. southwardae dominated in the Congo Lobe area, the site with the deepest sulfides. We discuss how hemoglobin may favor an active, vertical distribution of vesicomyids in sulfide-rich sediments.

Hard-hat day

CERN Multimedia

2003-01-01

CERN will be organizing a special information day on Friday, 27th June, designed to promote the wearing of hard hats and ensure that they are worn correctly. A new prevention campaign will also be launched.The event will take place in the hall of the Main Building from 11.30 a.m. to 2.00 p.m., when you will be able to come and try on various models of hard hat, including some of the very latest innovative designs, ask questions and pass on any comments and suggestions.

Study of 13Cr-4Ni-(Mo (F6NM Steel Grade Heat Treatment for Maximum Hardness Control in Industrial Heats

Directory of Open Access Journals (Sweden)

Massimo De Sanctis

2017-09-01

Full Text Available The standard NACE MR0175 (ISO 15156 requires a maximum hardness value of 23 HRC for 13Cr-4Ni-(Mo steel grade for sour service, requiring a double tempering heat treatment at temperature in the range 648–691 °C for the first tempering and 593–621 °C for the second tempering. Difficulties in limiting alloy hardness after the tempering of forged mechanical components (F6NM are often faced. Variables affecting the thermal behavior of 13Cr-4Ni-(Mo during single and double tempering treatments have been studied by means of transmission electron microscopy (TEM observations, X-ray diffraction measurements, dilatometry, and thermo-mechanical simulations. It has been found that relatively low Ac1 temperatures in this alloy induce the formation of austenite phase above 600 °C during tempering, and that the formed, reverted austenite tends to be unstable upon cooling, thus contributing to the increase of final hardness via transformation to virgin martensite. Therefore, it is necessary to increase the Ac1 temperature as much as possible to allow the tempering of martensite at the temperature range required by NACE without the detrimental formation of virgin martensite upon final cooling. Attempts to do so have been carried out by reducing both carbon (<0.02% C and nitrogen (<100 ppm levels. Results obtained herein show final hardness below NACE limits without an unacceptable loss of mechanical strength.

Effect of Industrial Effluent on the Growth of Marine Diatom ...

African Journals Online (AJOL)

The marine centric diatom,Chaetoceros simplex (Ostenfeld, 1901) was exposed to five different concentrations of industrial effluent for 96 hrs to investigate the effect on growth. The physico-chemical parameters viz. colour, odour, temperature, salinity, dissolved oxygen, turbidity, pH, alkalinity, hardness, ammonia, nitrite, ...

THE FAILURE OF INDUSTRIALISM IN COMMUNIST ROMANIA

Directory of Open Access Journals (Sweden)

Pãrean Mihai - Olimpiu

2012-07-01

Full Text Available This work aims to present the exact thinking and action of the Romanian Communist leaders that had as declared purpose the Romanian society’s propseprity company. This falls into the line drawn by the Communists, but in the case of Romania the ambitions were far above the country's potential. In order to understand the situation of the national economy in the past two decades we must take into account the manner in which they have carried out economic policies in the Communist leadership. This marched on exacerbated development of manufacturing industry by capital goods to the detriment of the goods consumer industry, which generated a series of social tensions. The economic objectives of Communist Romania were limited for the exacerbated development of the industrial sector. Its presence of economic policy measures implemented in our country shows that the authorities had in mind a self-sufficient industrialization by providing greater care than conventional industries, with high energy consumption. This unprecedented enhancement for national economy was made possible by the contracting of foreign credits And this began to give increasing and more frequent misfires when the world was hit by the resouces of the crisis. The falling of the national economy has been Romania unable to repay loans on time. The obsessive decision of the authorities was to fully pay off foreign debt in oder to allow new investment in construction of some megalomaniac industrial sights, that could hardly be effective. Thus, there was no link between the overall targets of national economic policies and the needs of the company. In this work are chronologically and factually shown all the decisions adopted in the industrial policy in Romania.Certainly that at the beginning of massive industrialization results seemed to be at least some optimistic, but after the population had passed through various serious situations (floods, earthquake to what degree very hard

Preliminary study of HDA coating on CLAM steel followed by high temperature oxidation

Energy Technology Data Exchange (ETDEWEB)

Chen, Xiaoqiang, E-mail: newboy.chen@163.com; Huang, Qunying; Yan, Zilin; Song, Yong; Liu, Shaojun; Jiang, Zhizhong

2013-11-15

A hot-dip aluminizing process is expected to produce aluminide coatings on structural materials to resist tritium permeation, corrosion, and magnetohydrodynamic (MHD) effects in the fusion reactor blanket. China Low Activation Martensitic (CLAM) steel, which is the candidate structural material for the LiPb blanket system in China, was coated with pure aluminum and with an Al–Si alloy. Factors affecting the thickness and morphology of the aluminide coatings were studied. After the hot-dipping treatment, FeAl{sub 3} and Fe{sub 2}Al{sub 5} were observed at the Al/steel interface. The existence of silicon in the molten aluminum suppressed the growth of Fe{sub 2}Al{sub 5}, built up the thickness of FeAl{sub 3} slightly, and contributed to reducing the thickness of the intermetallic layer. The brittle phase of Fe{sub 2}Al{sub 5} had completely transformed to ductile phases of FeAl{sub 2}, FeAl and α-Fe(Al) after high temperature heat-treatment in air. Kirkendall voids were found in the diffusion layer, due to the rapid interdiffusion of iron and aluminum during oxidation. Cracks and pores were observed on the coating surface and at the interlayer. Grazing incidence X-ray diffraction indicates the presence of α-Al{sub 2}O{sub 3} in the oxide layer.

Mathematical modeling for surface hardness in investment casting applications

International Nuclear Information System (INIS)

Singh, Rupinder

2012-01-01

Investment casting (IC) has many potential engineering applications. Not much work hitherto has been reported for modeling the surface hardness (SH) in IC of industrial components. In the present study, outcome of Taguchi based macro model has been used for developing a mathematical model for SH; using Buckingham's π theorem. Three input parameters namely volume/surface area (V/A) ratio of cast components, slurry layer's combination (LC) and molten metal pouring temperature were selected to give output in form of SH. This study will provide main effects of these variables on SH and will shed light on the SH mechanism in IC. The comparison with experimental results will also serve as further validation of model

Experimental Investigation of White Layer formation in Hard Turning

Science.gov (United States)

Umbrello, D.; Rotella, G.; Crea, F.

2011-05-01

Hard turning with super hard cutting tools, like PCBN or Ceramics inserts, represents an interesting advance in the manufacturing industry, regarding the finishing of hardened steels. This innovative machining technique is considered an attractive alternative to traditional finish grinding operations because of the high flexibility, the ability to achieve higher metal removal rates, the possibility to operate without the use of coolants, and the capability to achieve comparable workpiece quality. However, the surface integrity effects of hard machining need to be taken into account due to their influence on the life of machined components. In particular, the formation of a usually undesirable white layer at the surface needs further investigation. Three different mechanisms have been proposed as main responsible of the white layer genesis: (i) microstructural phase transformation due to a rapid heating and quenching, (ii) severe plastic deformation resulting in a homogenous structure and/or a very fine grain size microstructure; (iii) surface reaction with the environment. In this research, an experimental campaign was carried out and several experimental techniques were used in order to analyzed the machined surface and to understand which of the above mentioned theories is the main cause of the white layer formation when AISI 52100 hardened steel is machined by PCBN inserts. In particular, the topography characterization has obtained by means of optical and scanning electron microscope (SEM) while microstructural phase composition and chemical characterization have been respectively detected using X-ray Diffraction (XRD) and Energy-dispersive X-ray spectroscopy (EDS) techniques. The results prove that the white layer is the result of microstructural alteration, i.e. the generation of a martensitic structure.

Standard test methods for rockwell hardness of metallic materials

CERN Document Server

American Society for Testing and Materials. Philadelphia

2008-01-01

1.1 These test methods cover the determination of the Rockwell hardness and the Rockwell superficial hardness of metallic materials by the Rockwell indentation hardness principle. This standard provides the requirements for Rockwell hardness machines and the procedures for performing Rockwell hardness tests. 1.2 This standard includes additional requirements in annexes: Verification of Rockwell Hardness Testing Machines Annex A1 Rockwell Hardness Standardizing Machines Annex A2 Standardization of Rockwell Indenters Annex A3 Standardization of Rockwell Hardness Test Blocks Annex A4 Guidelines for Determining the Minimum Thickness of a Test Piece Annex A5 Hardness Value Corrections When Testing on Convex Cylindrical Surfaces Annex A6 1.3 This standard includes nonmandatory information in appendixes which relates to the Rockwell hardness test. List of ASTM Standards Giving Hardness Values Corresponding to Tensile Strength Appendix X1 Examples of Procedures for Determining Rockwell Hardness Uncertainty Appendix X...

Standard test methods for rockwell hardness of metallic materials

CERN Document Server

American Society for Testing and Materials. Philadelphia

2011-01-01

1.1 These test methods cover the determination of the Rockwell hardness and the Rockwell superficial hardness of metallic materials by the Rockwell indentation hardness principle. This standard provides the requirements for Rockwell hardness machines and the procedures for performing Rockwell hardness tests. 1.2 This standard includes additional requirements in annexes: Verification of Rockwell Hardness Testing Machines Annex A1 Rockwell Hardness Standardizing Machines Annex A2 Standardization of Rockwell Indenters Annex A3 Standardization of Rockwell Hardness Test Blocks Annex A4 Guidelines for Determining the Minimum Thickness of a Test Piece Annex A5 Hardness Value Corrections When Testing on Convex Cylindrical Surfaces Annex A6 1.3 This standard includes nonmandatory information in appendixes which relates to the Rockwell hardness test. List of ASTM Standards Giving Hardness Values Corresponding to Tensile Strength Appendix X1 Examples of Procedures for Determining Rockwell Hardness Uncertainty Appendix X...

Heavy metal determinations in algae and clams and their possible employment for assessing the sea water quality criteria.

Science.gov (United States)

Locatelli, C; Fabbri, D; Torsi, G

2001-01-01

An empirical criterion for a possible classification of sea water quality is proposed. It is based on the knowledge of metal content in algae (Ulva Rigida) and clams (Tapes Philippinarum), two species present in marine ecosystems. The elements considered are Hg, Cu, Pb, Cd, Zn. The analytical technique employed is Differential Pulse Anodic Stripping Voltammetry (DPASV) in the case of Cu, Pb, Cd, Zn, while the determination of mercury is obtained by the Cold Vapour Atomic Absorption Spectroscopy (CV-AAS) technique with SnCl2 as reducing agent. The analytical procedure has been verified on three standard reference materials: Sea Water BCR-CRM 403, Ulva Lactuca BCR-CRM 279 and Mussel Tissue BCR-CRM 278. For all the elements, in addition to detection limits, accuracy and precision are given: the former, expressed as relative error (e), and the latter, expressed as relative standard deviation (Sr), were in all cases lower than 6%.

Thermal spray coatings replace hard chrome

International Nuclear Information System (INIS)

Schroeder, M.; Unger, R.

1997-01-01

Hard chrome plating provides good wear and erosion resistance, as well as good corrosion protection and fine surface finishes. Until a few years ago, it could also be applied at a reasonable cost. However, because of the many environmental and financial sanctions that have been imposed on the process over the past several years, cost has been on a consistent upward trend, and is projected to continue to escalate. Therefore, it is very important to find a coating or a process that offers the same characteristics as hard chrome plating, but without the consequent risks. This article lists the benefits and limitations of hard chrome plating, and describes the performance of two thermal spray coatings (tungsten carbide and chromium carbide) that compared favorably with hard chrome plating in a series of tests. It also lists three criteria to determine whether plasma spray or hard chrome plating should be selected

A biomineralization study of the Indo-Pacific giant clam Tridacna gigas

Science.gov (United States)

Gannon, M. E.; Pérez-Huerta, A.; Aharon, P.; Street, S. C.

2017-06-01

The giant clam, Tridacna gigas, is an important faunal component of reef ecosystems of the Indo-Pacific region. In addition to its ecological role, shells of this bivalve species are useful bioarchives for past climate and environmental reconstructions. However, the biomineralization processes involved in shell aragonite deposition are insufficiently understood. Here, we present a study of the shell microstructure of modern specimens from Palm Island, Great Barrier Reef (GBR), Australia, and Huon Peninsula, Papua New Guinea (PNG), using a combination of petrography, scanning electron microscopy, electron backscatter diffraction, Raman spectroscopy and stable carbon isotope ratios. Daily growth increments were recognizable in all specimens through ontogeny, and counting these growth lines provides a robust specimen age estimate. For the internal layers, paired increments of organized aragonitic needles and compact, oblong crystals were recognized in a specimen from PNG, whereas specimens from GBR were composed of shield-like crystals that were not definable at the microscale. The combination of nutrient availability, rainfall and solar irradiance are likely to be the most significant factors controlling shell growth and may explain the observed differences in microstructure. The external layer, identical in all specimens, was composed of dendritic microstructure that is significantly enriched in 13C compared to the internal layer, suggesting different metabolic controls on layer deposition. We propose that the mineralization of the internal and external layers is independent from each other and associated with the activity of specific mantles. Future studies using T. gigas shells as bioarchives should consider the microstructure as it reflects the environment in which the individual lived and the differences in mineralization pathways of internal and external layers.

Structure, production and properties of high-melting compounds and systems (hard materials and hard metals)

International Nuclear Information System (INIS)

Holleck, H.; Thuemmler, F.

1979-07-01

The report contains contributions by various authors to the research project on the production, structure, and physical properties of high-melting compounds and systems (hard metals and hard materials), in particular WC-, TaC-, and MoC-base materials. (GSCH) [de

Effect of current and travel speed variation of TIG welding on microstructure and hardness of stainless steel SS 316L

Science.gov (United States)

Jatimurti, Wikan; Abdillah, Fakhri Aulia; Kurniawan, Budi Agung; Rochiem, Rochman

2018-04-01

One of the stainless steel types that widely used in industry is SS 316L, which is austenitic stainless steel. One of the welding methods to join stainless steel is Tungsten Inert Gas (TIG), which can affect its morphology, microstructure, strength, hardness, and even lead to cracks in the weld area due to the given heat input. This research has a purpose of analyzing the relationship between microstructure and hardness value of SS 316L stainless steel after TIG welding with the variation of current and travel speed. The macro observation shows a distinct difference in the weld metal and base metal area, and the weld form is not symmetrical. The metallographic test shows the phases that formed in the specimen are austenite and ferrite, which scattered in three welding areas. The hardness test showed that the highest hardness value found in the variation of travel speed 12 cm/min with current 100 A. Welding process and variation were given do not cause any defects in the microstructure, such as carbide precipitation and sigma phase, means that it does not affect the hardness and corrosion resistance of all welded specimen.

A mixed analog-digital radiation hard technology for high energy physics electronics DMILL (Durci Mixte sur Isolant Logico-Linéaire)

CERN Document Server

Beuville, E; Borgeaud, P; Fourches, N T; Rouger, M; Blanc, J P; Bruel, M; Delevoye-Orsier, E; Gautier, J; Du Port de Pontcharra, J; Truche, R; Dupont-Nivet, E; Flament, O; Leray, J L; Martin, J L; Montaron, J; Borel, G; Brice, J M; Chatagnon, P; Terrier, C; Aubert, Jean-Jacques; Delpierre, P A; Habrard, M C; Potheau, R; CERN. Geneva. Detector Research and Development Committee

1992-01-01

The high radiation level expected in the inner regions of the high luminosity LHC detectors (gamma and neutron) will require radiation hardened electronics. A consortium between the CEA (Commissariat a l'Energie Atomique) and Thomson TMS (Thomson Composants Militaires et Spatiaux) has been created to push for the development and the industrialization of a nascent technology which looks particularly adapted to the needs of HEP electronics. This technology, currently under development at the LETI(CEA), uses a SIMOX substrate with an epitaxial silicon film. It includes CMOS, JFETs and vertical bipolar transistors with a potential multi-megarad hardness. The CMOS and bipolar transistors constitute a rad-hard BiCMOS which will be useful to design analog and digital high-speed architectures. JFETs, which have intrinsically high hardness behaviour and low noise performances even at low temperature will enable very rad-hard, low noise front end electronics to be designed. Present results, together with the improvemen...

Effect of kernel size and mill type on protein, milling yield, and baking quality of hard red spring wheat

Science.gov (United States)

Optimization of flour yield and quality is important in the milling industry. The objective of this study was to determine the effect of kernel size and mill type on flour yield and end-use quality. A hard red spring wheat composite sample was segregated, based on kernel size, into large, medium, ...

The natural theology of Victorian industry.

Science.gov (United States)

Fisher, Nick

2015-03-01

As clergymen in Britain celebrated the Great Exhibition in the summer of 1851 and drew appropriate moral lessons, there was widespread agreement that the triumphs of industry on display represented the fulfilment of God's will. The basic assumption was that overcoming God's curse on Adam had been possible only through sustained hard work - industry in the early Victorian sense - and that this imperative work ethic had always been God's intention for mankind. In elaborating the details, preachers combined the British tradition of natural theology with the Scottish Enlightenment's progressive science of man to paint a picture of the slow recovery of man from the Fall through his own industry. This was the very story of civilization itself, with God the driving force. The celebrants were quite clear that it was divine providence that had ordained the greatness of Great Britain. Copyright © 2015 Elsevier Ltd. All rights reserved.

Hard-hard coupling assisted anomalous magnetoresistance effect in amine-ended single-molecule magnetic junction

Science.gov (United States)

Tang, Y.-H.; Lin, C.-J.; Chiang, K.-R.

2017-06-01

We proposed a single-molecule magnetic junction (SMMJ), composed of a dissociated amine-ended benzene sandwiched between two Co tip-like nanowires. To better simulate the break junction technique for real SMMJs, the first-principles calculation associated with the hard-hard coupling between a amine-linker and Co tip-atom is carried out for SMMJs with mechanical strain and under an external bias. We predict an anomalous magnetoresistance (MR) effect, including strain-induced sign reversal and bias-induced enhancement of the MR value, which is in sharp contrast to the normal MR effect in conventional magnetic tunnel junctions. The underlying mechanism is the interplay between four spin-polarized currents in parallel and anti-parallel magnetic configurations, originated from the pronounced spin-up transmission feature in the parallel case and spiky transmission peaks in other three spin-polarized channels. These intriguing findings may open a new arena in which magnetotransport and hard-hard coupling are closely coupled in SMMJs and can be dually controlled either via mechanical strain or by an external bias.

Melting of polydisperse hard disks

NARCIS (Netherlands)

Pronk, S.; Frenkel, D.

2004-01-01

The melting of a polydisperse hard-disk system is investigated by Monte Carlo simulations in the semigrand canonical ensemble. This is done in the context of possible continuous melting by a dislocation-unbinding mechanism, as an extension of the two-dimensional hard-disk melting problem. We find

Study of Flux Ratio of C60 to Ar Cluster Ion for Hard DLC Film deposition

International Nuclear Information System (INIS)

Miyauchi, K.; Toyoda, N.; Kanda, K.; Matsui, S.; Kitagawa, T.; Yamada, I.

2003-01-01

To study the influence of the flux ratio of C60 molecule to Ar cluster ion on (diamond like carbon) DLC film characteristics, DLC films deposited under various flux ratios were characterized with Raman spectrometry and Near Edge X-ray Absorption Fine Structure (NEXAFS). From results of these measurements, hard DLC films were deposited when the flux ratio of C60 to Ar cluster ion was between 0.7 and 4. Furthermore the DLC film with constant sp2 content was obtained in the range of the ratio from 0.7 to 4, which contents are lower values than that of conventional films such as RF plasma. DLC films deposited under the ratio from 1 to 4 had hardness from 40 to 45GPa. It was shown that DLC films with stable properties of low sp2 content and high hardness were formed even when the fluxes were varied from 1 to 4 during deposition. It was indicated that this process was useful in the view of industrial application

Effect of cadmium in the clam Ruditapes decussatus assessed by proteomic analysis

Energy Technology Data Exchange (ETDEWEB)

Chora, Suze [University of Algarve, CIMA, Faculty of Marine and Environmental Sciences, Campus de Gambelas, 8000-139 Faro (Portugal); University of Nice-Sophia Antipolis EA 4228 ECOMERS ' Ecosystemes Cotiers Marins et Reponses aux stress' Parc Valrose, BP 71, 06108 Nice cedex 2 (France); Starita-Geribaldi, Mireille [University of Nice-Sophia Antipolis, Laboratory of Oral Microbiology, URE 01., Faculty of Odontology, Pole Universitaire Saint-Jean d' Angely, 24 avenue des Diables Bleus 06357 Nice cedex 4 (France); Guigonis, Jean-Marie [University of Nice-Sophia Antipolis, Plateforme Bernard Rossi - Proteome Metabolome IFR50, Nice, F-06107 (France); Samson, Michel [University of Nice-Sophia Antipolis, Plateforme Bernard Rossi - Proteome Metabolome IFR50, Nice, F-06107 (France); INSERM, Unite 638, Nice, F-06107 (France); Romeo, Michele [University of Nice-Sophia Antipolis EA 4228 ECOMERS ' Ecosystemes Cotiers Marins et Reponses aux stress' Parc Valrose, BP 71, 06108 Nice cedex 2 (France); Bebianno, Maria Joao, E-mail: mbebian@ualg.pt [University of Algarve, CIMA, Faculty of Marine and Environmental Sciences, Campus de Gambelas, 8000-139 Faro (Portugal)

2009-10-04

Cadmium, an environmental stressor due to its toxicity, persistence and accumulation in biota, is widespread in the aquatic environment. Cadmium accumulation kinetics have revealed that Ruditapes decussatus has a high affinity to this metal. Proteomics is an effective tool to evaluate the toxic effects of contaminants. The aim of this study was to investigate the Cd effects in the gill and digestive gland of the sentinel species R. decussatus. Protein expression profiles (PEPs) in the clam tissues exposed to Cd (40 {mu}g l{sup -1}, 21 days) were compared to unexposed ones. Cd induces major changes in tissue-specific protein expression profiles in gill and digestive gland. This tissue dependent response results mainly from differences in Cd accumulation, protein inhibition and/or autophagy. An overall decrease of protein spots was detected in both treated tissues, being higher in gill. Some of the spots more drastically altered after pollutants exposure were excised and nine were identified by micro liquid chromatography tandem mass spectrometry (LC-MS/MS). Proteins identified by homology search in databases included: three proteins (8-fold) up-regulated, one down-regulated, four suppressed and one induced. Cd induces major changes in proteins involved in cytoskeletal structure maintenance (muscle-type actin, adductor muscle actin and {beta}-tubulin), cell maintenance (Rab GDP) and metabolism (ALDH and MCAD, both identified by de novo sequencing) suggesting potential energetic change. They provide a valuable knowledge of Cd effects at biochemical and molecular levels in the gill and digestive gland of R. decussatus.

Problems in the implementation of energy conservation methods: the industrial view

Energy Technology Data Exchange (ETDEWEB)

Broad, C.W.

1977-10-15

It is pointed out that New Zealand industry has been identified as putting little effort into energy conservation. An energy conservation campaign in industry to increase efficiency and reduce wastage could have major benefits for New Zealand as a whole. Little progress in implementing energy conservation techniques in industry is apparent at present. Business decisions are in the main motivated by profits. Because of the low place of energy in industry's costs of production, seen as a single factor, it hardly rates greater priority over other established production costs. A need to integrate energy costs and material costs is apparent. The need for education is obvious, now, with cheap and limitless energy no longer existing.

Problems in the implementation of energy conservation methods: the industrial view

Energy Technology Data Exchange (ETDEWEB)

Broad, C. W.

1977-10-15

It is pointed out that New Zealand industry has been identified as putting little effort into energy conservation. An energy conservation campaign in industry to increase efficiency and reduce wastage could have major benefits for New Zealand as a whole. Little progress in implementing energy conservation techniques in industry is apparent at present. Business decisions are in the main motivated by profits. Because of the low place of energy in industry's costs of production, seen as a single factor, it hardly rates greater priority over other established production costs. A need to integrate energy costs and material costs is apparent. The need for education is obvious, now, with cheap and limitless energy no longer existing.

Advances in hard nucleus cataract surgery

Directory of Open Access Journals (Sweden)

Wei Cui

2013-11-01

Full Text Available Security and perfect vision and fewer complications are our goals in cataract surgery, and hard-nucleus cataract surgery is always a difficulty one. Many new studies indicate that micro-incision phacoemulsification in treating hard nucleus cataract is obviously effective. This article reviews the evolution process of hard nuclear cataract surgery, the new progress in the research of artificial intraocular lens for microincision, and analyse advantages and disadvantages of various surgical methods.

Using game theory to improve safety within chemical industrial parks

CERN Document Server

Reniers, Genserik

2013-01-01

Though the game-theoretic approach has been vastly studied and utilized in relation to economics of industrial organizations, it has hardly been used to tackle safety management in multi-plant chemical industrial settings. Using Game Theory for Improving Safety within Chemical Industrial Parks presents an in-depth discussion of game-theoretic modelling which may be applied to improve cross-company prevention and -safety management in a chemical industrial park.   By systematically analyzing game-theoretic models and approaches in relation to managing safety in chemical industrial parks, Using Game Theory for Improving Safety within Chemical Industrial Parks explores the ways game theory can predict the outcome of complex strategic investment decision making processes involving several adjacent chemical plants. A number of game-theoretic decision models are discussed to provide strategic tools for decision-making situations.   Offering clear and straightforward explanations of methodologies, Using Game Theor...

CO2 capture takes its industrial turn

International Nuclear Information System (INIS)

Remoue, A.; Lutzky, A.

2009-01-01

The CO 2 capture and sequestration is entering the industrial era. The technologies are ready, the regulation is progressively put into action, the financing of demonstration facilities is unfreezing and companies are on the starting line from Canada to China, including the USA and Europe. The market takeoff is expected for 2015 but the competition is already hard between equipment manufacturers who wish to develop proprietary technologies. (J.S.)

Sterilization of freeze dried manila clam (Ruditapea philippinarum) porridge for immuno-compromised patients

Energy Technology Data Exchange (ETDEWEB)

Song, Beom Seok; Park, Jae Nam [Team for Radiation Food Science and Biotechnology, Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of)

2017-02-15

This study was conducted to evaluate the combined effect of gamma irradiation and different conditions (vacuum packaging, antioxidant and freezing) on the microbiological and sensory characteristics of freeze dried Manila clam porridge (MCP) for immuno-compromised patient food. McP can be sterilized at 1 kGy to 10 kGy. the initial counts of total aerobic bacteria and yeast molds in the non-irradiated MCP were 2.4±0.5 and 1.2±0.3 log CFU g{sup -}'1, respectively, but gamma irradiation significantly decreased the total aerobic bacteria to below the detection limit (1 log CFU g{sup -1}) (5 kGy). Moreover, gamma irradiation effectively eliminated yeasts/molds at dose below than 1 kGy. However, gamma irradiation accelerated the increase of lipid oxidation and therefore, decreased the sensory characteristics of MCP as irradiation dose increased. to improve the sensory qualities of gamma irradiated MCP, combination treatment (vacuum packaging, 0.1% vitamin c) were applied. there was no significant difference in the overall acceptance scores between the combined-treatment sample (5.6 points) and the non-irradiated samples (6.0). the results indicate that combination treatment (vacuum packaging, 0.1% vitamin c) may help to maintain the quality of MCP. therefore, it considered that irradiation of MCP with combined treatment and this is an effective method for the consumption as a special purpose food such as for space travel or immuno-compromised patients.

Sterilization of freeze dried manila clam (Ruditapea philippinarum) porridge for immuno-compromised patients

International Nuclear Information System (INIS)

Song, Beom Seok; Park, Jae Nam

2017-01-01

This study was conducted to evaluate the combined effect of gamma irradiation and different conditions (vacuum packaging, antioxidant and freezing) on the microbiological and sensory characteristics of freeze dried Manila clam porridge (MCP) for immuno-compromised patient food. McP can be sterilized at 1 kGy to 10 kGy. the initial counts of total aerobic bacteria and yeast molds in the non-irradiated MCP were 2.4±0.5 and 1.2±0.3 log CFU g"-'1, respectively, but gamma irradiation significantly decreased the total aerobic bacteria to below the detection limit (1 log CFU g"-"1) (5 kGy). Moreover, gamma irradiation effectively eliminated yeasts/molds at dose below than 1 kGy. However, gamma irradiation accelerated the increase of lipid oxidation and therefore, decreased the sensory characteristics of MCP as irradiation dose increased. to improve the sensory qualities of gamma irradiated MCP, combination treatment (vacuum packaging, 0.1% vitamin c) were applied. there was no significant difference in the overall acceptance scores between the combined-treatment sample (5.6 points) and the non-irradiated samples (6.0). the results indicate that combination treatment (vacuum packaging, 0.1% vitamin c) may help to maintain the quality of MCP. therefore, it considered that irradiation of MCP with combined treatment and this is an effective method for the consumption as a special purpose food such as for space travel or immuno-compromised patients

Rapid changes in water hardness and alkalinity: Calcite formation is lethal to Daphnia magna.

Science.gov (United States)

Bogart, Sarah J; Woodman, Samuel; Steinkey, Dylan; Meays, Cindy; Pyle, Greg G

2016-07-15

There is growing concern that freshwater ecosystems may be negatively affected by ever-increasing anthropogenic inputs of extremely hard, highly alkaline effluent containing large quantities of Ca(2+), Mg(2+), CO3(2-), and HCO3(-) ions. In this study, the toxicity of rapid and extreme shifts in water hardness (38-600mg/L as CaCO3) and alkalinity (30-420mg/L as CaCO3) to Daphnia magna was tested, both independently and in combination. Within these ranges, where no precipitation event occurred, shifts in water hardness and/or alkalinity were not toxic to D. magna. In contrast, 98-100% of D. magna died within 96h after exposure to 600mg/L as CaCO3 water hardness and 420mg/L as CaCO3 alkalinity (LT50 of 60h with a 95% CI of 54.2-66.0h). In this treatment, a CaCO3 (calcite) precipitate formed in the water column which was ingested by and thoroughly coated the D. magna. Calcite collected from a mining impacted stream contained embedded organisms, suggesting field streams may also experience similar conditions and possibly increased mortality as observed in the lab tests. Although further investigation is required to determine the exact fate of aquatic organisms exposed to rapid calcite precipitation in the field, we caution that negative effects may occur more quickly or at lower concentrations of water hardness and alkalinity in which we observed effects in D. magna, because some species, such as aquatic insects, are more sensitive than cladocerans to changes in ionic strength. Our results provide evidence that both calcite precipitation and the major ion balance of waters should be managed in industrially affected ecosystems and we support the development of a hardness+alkalinity guideline for the protection of aquatic life. Crown Copyright © 2016. Published by Elsevier B.V. All rights reserved.

Psychosocial risks and hydrocarbon leaks : an exploration of their relationship in the Norwegian oil and gas industry

NARCIS (Netherlands)

Bergh, L.I.V.; Ringstad, A.J.; Leka, S.; Zwetsloot, G.I.J.M.

2014-01-01

Hydrocarbon leaks have a major accident potential in the oil and gas industry. Over the years the oil and gas industry in Norway has worked hard to find means to prevent hydrocarbon leaks and is today able to report significant progress. In this context, the exploration of accidents in light of

Overfishing population characteristics of razor clam, Ensis macha, from Independencia Bay, Peru, in 2004 year

Directory of Open Access Journals (Sweden)

Juan Tarazona

2011-05-01

Full Text Available Quantitative monthly samplings, in 2004, were carried out to estimate the density and biomass of Ensis macha (Molina 1782, from Morro Quemado area, Bay Independence, Pisco. The present study analyzes biometric relationships, growth parameters and somatic production using the ELEFAN I routine and the Crisp’s method. During the year 2004 the rate of exploitation (E= 0.69 y-1 was significantly bigger than the values of 2003 and the monthly landings (maximum of 335 t and fishing effort (maximum of 848 trips were twice increased. These changes induced in the same year a significant decrease of population mean density (D= 54.13 ind. m-2 and the halfway reduction of somatic production (P= 81.99 gAFDW m-2 y-1 and P/B rate (0.38 y-1 values, regarding the values of the previous year. Also, a significant increment of total mortality rate (2.84 y-1 and the fishing mortality rate (1.97 y-1 were twice increased, regarding the previous year. It is assumed that the population of razor clams already was a overfishing commercial resource in the 2003 and that the increment of fishing pressure in the 2004, particularly during the second semester, intensified its overfishing resource condition.

Is metal contamination responsible for increasing aneuploidy levels in the Manila clam Ruditapes philippinarum?

KAUST Repository

Piló, D.

2016-11-03

The present study assessed the metal genotoxicity potential at chromosome-level in the bivalve Ruditapes philippinarum collected along different areas of the Tagus estuary. Higher levels of aneuploidy on gill cells were detected at the most sediment contaminated area both in May (31.7%) and October (36.0%) when compared to a less contaminated area over the same periods (20.3% and 29.0% respectively). Interestingly, metal bioaccumulation in gills was higher in the specimens collected at the least contaminated area with the exception of Pb. Indeed, the multivariate analysis revealed a stronger relation between aneuploidy and sediment contamination than between aneuploidy and the bioaccumulation of the metals. The temporal and spatial inconsistency found for the bioaccumulation of metals in R. philippinarum and the positive correlation between sediment contamination and aneuploidy at the most contaminated area suggest that these chromosome-level effects might be due to chronic metal contamination occurring in the Tagus estuary, rather than a direct result of the temporal variation of bioavailable contaminants. The vertical transmission phenomenon of bivalve aneuploidy levels may then be perpetuating those levels on clams from the most contaminated area. The present results shed light about the effect of metal toxicity at the chromosome-level in species inhabiting chronic contaminated areas and highlight the use of aneuploidy as an effective tool to identify persistent contamination in worldwide transitional waters.

Hard diffraction and rapidity gaps

International Nuclear Information System (INIS)

Brandt, A.

1995-09-01

The field of hard diffraction, which studies events with a rapidity gap and a hard scattering, has expanded dramatically recently. A review of new results from CDF, D OE, H1 and ZEUS will be given. These results include diffractive jet production, deep-inelastic scattering in large rapidity gap events, rapidity gaps between high transverse energy jets, and a search for diffractive W-boson production. The combination of these results gives new insight into the exchanged object, believed to be the pomeron. The results axe consistent with factorization and with a hard pomeron that contains both quarks and gluons. There is also evidence for the exchange of a strongly interacting color singlet in high momentum transfer (36 2 ) events

Genetic analysis of kernel texture (grain hardness) in a hard red spring wheat (Triticum aestivum L.) bi-parental population

Science.gov (United States)

Grain hardness is a very important trait in determining wheat market class and also influences milling and baking traits. At the grain Hardness (Ha) locus on chromosome 5DS, there are two primary mutations responsible for conveying a harder kernel texture among U.S. hard red spring wheats: (1) the P...

Penelitian penerapan sol karet sepatu kanvas untuk olah raga pada industri ditinjau dari sifat ketahanan kikis dan kekerasannya

Directory of Open Access Journals (Sweden)

Any Setyaningsih

1998-06-01

Full Text Available Appied research rubber sole for canvas shoes sport of industry have observed of properties abrasion resistance and hardness with perform research on the process to shape sole in industry with variation time of 4, 5, 6, 7, 8 minutes and pressure of 145, 150, 155 kg/cm2 on temperature 150’C on the result 15 variation soles, until of result properties abrasion resistance = 0.1410 mm3/kgm and hardness = 70 shore A to shape with variation pressure 150 kg/cm2, time 6 minute and temperature 150’C ti fill means SNI 0171-1987 A : Canvas Shoes with Rubber Sole for Sport.

Manual materials handling: the cause of over-exertion injury and illness in industry.

Science.gov (United States)

Chaffin, D B

1979-01-01

It is reported from various sources that overexertion due to lifting, pushing, pulling, and carrying objects accounts for about 27 percent of all compensable industrial injury and illness in the United States. Resulting strain/sprain injuries account for over 50 percent of workmen's compensation clams in many industries. Almont two-thirds of these involve back pain, with reported compensation and medical payments totaling well over one billion dollars annually in the U.S. An estimated 300,000 plus workers will be affected each year, 5 to 10 percent of whom will have a permanent disability and often will be unemployable. This paper attempts to describe four basic approaches used to study this occupational health problem. In so doing, a concerted effort is made to identifiy the gaps in knowledge which need to be more fully researched. The approaches utilized to understand and control the hazards of manual materials handling are: 1) epidemiological studies of job and worker attributes to identify those that individually and in combination cause musculoskeletal incidents, 2) psychophysical studies to ascertain the volitional tolerance of workers to the stress mitigated by manual materials-handling activities, 3) biomechanical studies of the musculoskeletal system during common exertions required in manual materials-handling activities, and 4) physiological studies of the strain imposed on the cardiovascular system during repeated load-handling activities. The state of knowledge from each of these approaches is summarized briefly, and a case is made that much research is still needed to substantiate the necessary controls to lessen the economic burden and human suffering associated with manual materials-handling acts in industry.

Consequences of concentration in the power industry for competition

International Nuclear Information System (INIS)

Schmitt, D.; Schuermann, J.

1977-01-01

The problem of the consequences of concentration in the power industry of West Germany for competition has been studied by the authors and others in the investigation'Konzentration und Wettbewerb...', which has been published by the power economics institute of Cologne University. The article is based on this investigation and discusses its conclusions. Three concepts for the deliminitation of markets are presented and discussed with a view to their realizability under the existing conditions on different energy supply markets i.e. the mineral oil, electric power, gas hard coral, brown coal, and nuclear industries. (orig.) [de

Impact of aging on radiation hardness

International Nuclear Information System (INIS)

Shaneyfelt, M.R.; Winokur, P.S.; Fleetwood, D.M.

1997-01-01

Burn-in effects are used to demonstrate the potential impact of thermally activated aging effects on functional and parametric radiation hardness. These results have implications on hardness assurance testing. Techniques for characterizing aging effects are proposed

Isotropic-nematic transition in a mixture of hard spheres and hard spherocylinders: scaled particle theory description

Directory of Open Access Journals (Sweden)

M.F. Holovko

2017-12-01

Full Text Available The scaled particle theory is developed for the description of thermodynamical properties of a mixture of hard spheres and hard spherocylinders. Analytical expressions for free energy, pressure and chemical potentials are derived. From the minimization of free energy, a nonlinear integral equation for the orientational singlet distribution function is formulated. An isotropic-nematic phase transition in this mixture is investigated from the bifurcation analysis of this equation. It is shown that with an increase of concentration of hard spheres, the total packing fraction of a mixture on phase boundaries slightly increases. The obtained results are compared with computer simulations data.

The changing veneer and plywood industry of Michigan and Wisconsin.

Science.gov (United States)

Gary R. Lindell; Lewis T. Hendricks

1972-01-01

Analyzes trends in the hardwood veneer and plywood industry of Michigan and Wisconsin between 1964 and 1969. In that period, red oak and hard maple replaced yellow birch as the major species used. Log supplies were adequate. Wall paneling was the major end market with doorskins next. Excess plywood producing capacity is a chronic problem.

Hard and soft acids and bases: atoms and atomic ions.

Science.gov (United States)

Reed, James L

2008-07-07

The structural origin of hard-soft behavior in atomic acids and bases has been explored using a simple orbital model. The Pearson principle of hard and soft acids and bases has been taken to be the defining statement about hard-soft behavior and as a definition of chemical hardness. There are a number of conditions that are imposed on any candidate structure and associated property by the Pearson principle, which have been exploited. The Pearson principle itself has been used to generate a thermodynamically based scale of relative hardness and softness for acids and bases (operational chemical hardness), and a modified Slater model has been used to discern the electronic origin of hard-soft behavior. Whereas chemical hardness is a chemical property of an acid or base and the operational chemical hardness is an experimental measure of it, the absolute hardness is a physical property of an atom or molecule. A critical examination of chemical hardness, which has been based on a more rigorous application of the Pearson principle and the availability of quantitative measures of chemical hardness, suggests that the origin of hard-soft behavior for both acids and bases resides in the relaxation of the electrons not undergoing transfer during the acid-base interaction. Furthermore, the results suggest that the absolute hardness should not be taken as synonymous with chemical hardness but that the relationship is somewhat more complex. Finally, this work provides additional groundwork for a better understanding of chemical hardness that will inform the understanding of hardness in molecules.

Hard Copy Market Overview

Science.gov (United States)

Testan, Peter R.

1987-04-01

A number of Color Hard Copy (CHC) market drivers are currently indicating strong growth in the use of CHC technologies for the business graphics marketplace. These market drivers relate to product, software, color monitors and color copiers. The use of color in business graphics allows more information to be relayed than is normally the case in a monochrome format. The communicative powers of full-color computer generated output in the business graphics application area will continue to induce end users to desire and require color in their future applications. A number of color hard copy technologies will be utilized in the presentation graphics arena. Thermal transfer, ink jet, photographic and electrophotographic technologies are all expected to be utilized in the business graphics presentation application area in the future. Since the end of 1984, the availability of color application software packages has grown significantly. Sales revenue generated by business graphics software is expected to grow at a compound annual growth rate of just over 40 percent to 1990. Increased availability of packages to allow the integration of text and graphics is expected. Currently, the latest versions of page description languages such as Postscript, Interpress and DDL all support color output. The use of color monitors will also drive the demand for color hard copy in the business graphics market place. The availability of higher resolution screens is allowing color monitors to be easily used for both text and graphics applications in the office environment. During 1987, the sales of color monitors are expected to surpass the sales of monochrome monitors. Another major color hard copy market driver will be the color copier. In order to take advantage of the communications power of computer generated color output, multiple copies are required for distribution. Product introductions of a new generation of color copiers is now underway with additional introductions expected

Development of method for evaluating cell hardness and correlation between bacterial spore hardness and durability

Directory of Open Access Journals (Sweden)

Nakanishi Koichi

2012-06-01

Full Text Available Abstract Background Despite the availability of conventional devices for making single-cell manipulations, determining the hardness of a single cell remains difficult. Here, we consider the cell to be a linear elastic body and apply Young’s modulus (modulus of elasticity, which is defined as the ratio of the repulsive force (stress in response to the applied strain. In this new method, a scanning probe microscope (SPM is operated with a cantilever in the “contact-and-push” mode, and the cantilever is applied to the cell surface over a set distance (applied strain. Results We determined the hardness of the following bacterial cells: Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, and five Bacillus spp. In log phase, these strains had a similar Young’s modulus, but Bacillus spp. spores were significantly harder than the corresponding vegetative cells. There was a positive, linear correlation between the hardness of bacterial spores and heat or ultraviolet (UV resistance. Conclusions Using this technique, the hardness of a single vegetative bacterial cell or spore could be determined based on Young’s modulus. As an application of this technique, we demonstrated that the hardness of individual bacterial spores was directly proportional to heat and UV resistance, which are the conventional measures of physical durability. This technique allows the rapid and direct determination of spore durability and provides a valuable and innovative method for the evaluation of physical properties in the field of microbiology.

Hard coatings

International Nuclear Information System (INIS)

Dan, J.P.; Boving, H.J.; Hintermann, H.E.

1993-01-01

Hard, wear resistant and low friction coatings are presently produced on a world-wide basis, by different processes such as electrochemical or electroless methods, spray technologies, thermochemical, CVD and PVD. Some of the most advanced processes, especially those dedicated to thin film depositions, basically belong to CVD or PVD technologies, and will be looked at in more detail. The hard coatings mainly consist of oxides, nitrides, carbides, borides or carbon. Over the years, many processes have been developed which are variations and/or combinations of the basic CVD and PVD methods. The main difference between these two families of deposition techniques is that the CVD is an elevated temperature process (≥ 700 C), while the PVD on the contrary, is rather a low temperature process (≤ 500 C); this of course influences the choice of substrates and properties of the coating/substrate systems. Fundamental aspects of the vapor phase deposition techniques and some of their influences on coating properties will be discussed, as well as the very important interactions between deposit and substrate: diffusions, internal stress, etc. Advantages and limitations of CVD and PVD respectively will briefly be reviewed and examples of applications of the layers will be given. Parallel to the development and permanent updating of surface modification technologies, an effort was made to create novel characterisation methods. A close look will be given to the coating adherence control by means of the scratch test, at the coating hardness measurement by means of nanoindentation, at the coating wear resistance by means of a pin-on-disc tribometer, and at the surface quality evaluation by Atomic Force Microscopy (AFM). Finally, main important trends will be highlighted. (orig.)

Hard and soft acids and bases: structure and process.

Science.gov (United States)

Reed, James L

2012-07-05

Under investigation is the structure and process that gives rise to hard-soft behavior in simple anionic atomic bases. That for simple atomic bases the chemical hardness is expected to be the only extrinsic component of acid-base strength, has been substantiated in the current study. A thermochemically based operational scale of chemical hardness was used to identify the structure within anionic atomic bases that is responsible for chemical hardness. The base's responding electrons have been identified as the structure, and the relaxation that occurs during charge transfer has been identified as the process giving rise to hard-soft behavior. This is in contrast the commonly accepted explanations that attribute hard-soft behavior to varying degrees of electrostatic and covalent contributions to the acid-base interaction. The ability of the atomic ion's responding electrons to cause hard-soft behavior has been assessed by examining the correlation of the estimated relaxation energies of the responding electrons with the operational chemical hardness. It has been demonstrated that the responding electrons are able to give rise to hard-soft behavior in simple anionic bases.

Emissions from the Polish power industry

International Nuclear Information System (INIS)

Uliasz-Bochenczyk, Alicja; Mokrzycki, Eugeniusz

2007-01-01

Poland is a country where power and heat energy production is based on conventional fuel combustion, above all hard coal and lignite. In power plants and combined heat and power plants, fossil fuel combustion results in emitting to the atmosphere first of all SO 2 , NO x , CO, particulate matter, greenhouse gases for instance N 2 O and CO 2 . For many years the Polish power industry has tried to reduce the emission of air contaminants to the atmosphere. The reduction is feasible on account of various methods of emission reduction, which have been advanced and applied for many years. The paper presents conventional fuels used in the Polish professional power industry, as well as the principal emission types occurring there for the last 10 years and the undertaken reduction measures

Correlating particle hardness with powder compaction performance.

Science.gov (United States)

Cao, Xiaoping; Morganti, Mikayla; Hancock, Bruno C; Masterson, Victoria M

2010-10-01

Assessing particle mechanical properties of pharmaceutical materials quickly and with little material can be very important to early stages of pharmaceutical research. In this study, a wide range of pharmaceutical materials were studied using atomic force microscopy (AFM) nanoindentation. A significant amount of particle hardness and elastic modulus data were provided. Moreover, powder compact mechanical properties of these materials were investigated in order to build correlation between the particle hardness and powder compaction performance. It was found that the materials with very low or high particle hardness most likely exhibit poor compaction performance while the materials with medium particle hardness usually have good compaction behavior. Additionally, the results from this study enriched Hiestand's special case concept on particle hardness and powder compaction performance. This study suggests that the use of AFM nanoindentation can help to screen mechanical properties of pharmaceutical materials at early development stages of pharmaceutical research.

Silica removal in industrial effluents with high silica content and low hardness.

Science.gov (United States)

Latour, Isabel; Miranda, Ruben; Blanco, Angeles

2014-01-01

High silica content of de-inked paper mill effluents is limiting their regeneration and reuse after membrane treatments such as reverse osmosis (RO). Silica removal during softening processes is a common treatment; however, the effluent from the paper mill studied has a low hardness content, which makes the addition of magnesium compounds necessary to increase silica removal. Two soluble magnesium compounds (MgCl₂∙6H₂O and MgSO₄∙7H₂O) were tested at five dosages (250-1,500 mg/L) and different initial pH values. High removal rates (80-90%) were obtained with both products at the highest pH tested (11.5). With these removal efficiencies, it is possible to work at high RO recoveries (75-85%) without silica scaling. Although pH regulation significantly increased the conductivity of the waters (at pH 11.5 from 2.1 to 3.7-4.0 mS/cm), this could be partially solved by using Ca(OH)₂ instead of NaOH as pH regulator (final conductivity around 3.0 mS/cm). Maximum chemical oxygen demand (COD) removal obtained with caustic soda was lower than with lime (15 vs. 30%). Additionally, the combined use of a polyaluminum coagulant during the softening process was studied; the coagulant, however, did not significantly improve silica removal, obtaining a maximum increase of only 10%.

Double hard scattering without double counting

Energy Technology Data Exchange (ETDEWEB)

Diehl, Markus [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Gaunt, Jonathan R. [VU Univ. Amsterdam (Netherlands). NIKHEF Theory Group; Schoenwald, Kay [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany)

2017-02-15

Double parton scattering in proton-proton collisions includes kinematic regions in which two partons inside a proton originate from the perturbative splitting of a single parton. This leads to a double counting problem between single and double hard scattering. We present a solution to this problem, which allows for the definition of double parton distributions as operator matrix elements in a proton, and which can be used at higher orders in perturbation theory. We show how the evaluation of double hard scattering in this framework can provide a rough estimate for the size of the higher-order contributions to single hard scattering that are affected by double counting. In a numeric study, we identify situations in which these higher-order contributions must be explicitly calculated and included if one wants to attain an accuracy at which double hard scattering becomes relevant, and other situations where such contributions may be neglected.

Double hard scattering without double counting

International Nuclear Information System (INIS)

Diehl, Markus; Gaunt, Jonathan R.

2017-02-01

Double parton scattering in proton-proton collisions includes kinematic regions in which two partons inside a proton originate from the perturbative splitting of a single parton. This leads to a double counting problem between single and double hard scattering. We present a solution to this problem, which allows for the definition of double parton distributions as operator matrix elements in a proton, and which can be used at higher orders in perturbation theory. We show how the evaluation of double hard scattering in this framework can provide a rough estimate for the size of the higher-order contributions to single hard scattering that are affected by double counting. In a numeric study, we identify situations in which these higher-order contributions must be explicitly calculated and included if one wants to attain an accuracy at which double hard scattering becomes relevant, and other situations where such contributions may be neglected.

A case of industrial vs. open-source OCL : not so different after all

NARCIS (Netherlands)

Mengerink, J.G.M.; Noten, J.F.H.; Schiffelers, R.R.H.; van den Brand, M.G.J.; Serebrenik, A.

2017-01-01

When studying model-driven engineering (MDE) in industry, generalization of studies is often hard, as most artifacts are proprietary and confidential in nature. A possible solution would be to study open-source artifacts. However, open-source artifacts are not necessarily representative for those

Ocean Acidification Affects the Cytoskeleton, Lysozymes, and Nitric Oxide of Hemocytes: A Possible Explanation for the Hampered Phagocytosis in Blood Clams, Tegillarca granosa.

Science.gov (United States)

Su, Wenhao; Rong, Jiahuan; Zha, Shanjie; Yan, Maocang; Fang, Jun; Liu, Guangxu

2018-01-01

An enormous amount of anthropogenic carbon dioxide (CO 2 ) has been dissolved into the ocean, leading to a lower pH and changes in the chemical properties of seawater, which has been termed ocean acidification (OA). The impacts of p CO 2 -driven acidification on immunity have been revealed recently in various marine organisms. However, the mechanism causing the reduction in phagocytosis still remains unclear. Therefore, the impacts of p CO 2 -driven OA at present and near-future levels (pH values of 8.1, 7.8, and 7.4) on the rate of phagocytosis, the abundance of cytoskeleton components, the levels of nitric oxide (NO), and the concentration and activity of lysozymes (LZM) of hemocytes were investigated in a commercial bivalve species, the blood clam ( Tegillarca granosa ). In addition, the effects of OA on the expression of genes regulating actin skeleton and nitric oxide synthesis 2 ( NOS2 ) were also analyzed. The results obtained showed that the phagocytic rate, cytoskeleton component abundance, concentration and activity of LZM of hemocytes were all significantly reduced after a 2-week exposure to the future OA scenario of a pH of 7.4. On the contrary, a remarkable increase in the concentration of NO compared to that of the control was detected in clams exposed to OA. Furthermore, the expression of genes regulating the actin cytoskeleton and NOS were significantly up-regulated after OA exposure. Though the mechanism causing phagocytosis seemed to be complicated based on the results obtained in the present study and those reported previously, our results suggested that OA may reduce the phagocytosis of hemocytes by (1) decreasing the abundance of cytoskeleton components and therefore hampering the cytoskeleton-mediated process of engulfment, (2) reducing the concentration and activity of LZM and therefore constraining the degradation of the engulfed pathogen through an oxygen-independent pathway, and (3) inducing the production of NO, which may negatively

The tobacco industry's thwarting of marketing restrictions and health warnings in Lebanon.

Science.gov (United States)

Nakkash, R; Lee, K

2009-08-01

This article outlines how the tobacco industry has undermined tobacco control efforts in Lebanon since the early 1970s. An analysis of online and on-site tobacco industry documents, reviews of newspapers, policy and other documents, and interviews with key policy makers were conducted. Findings reveal how the weakness of tobacco control legislation in Lebanon has been the product of an effective tobacco industry strategy to weaken the content and scope of regulation, and delay adoption and implementation. The tobacco industry has built and maintained strong alliances that were and are regularly mobilised to effectively oppose regulation. Despite ratification of the World Health Organization Framework Convention on Tobacco Control in 2005, Lebanon's tobacco control track remains weak. Public health professionals and the government should work hard to oppose such tobacco industry tactics.

Pinnatoxin G is responsible for atypical toxicity in mussels (Mytilus galloprovincialis) and clams (Venerupis decussata) from Ingril, a French Mediterranean lagoon

Science.gov (United States)

Hess, Philipp; Abadie, Eric; Hervé, Fabienne; Berteaux, Tom; Séchet, Véronique; Aráoz, Romulo; Molgó, Jordi; Zakarian, Armen; Sibat, Manoëlla; Rundberget, Thomas; Miles, Christopher O.; Amzil, Zouher

2014-01-01

Following a review of official control data on shellfish in France, Ingril Lagoon had been identified as a site where positive mouse bioassays for lipophilic toxins had been repeatedly observed. These unexplained mouse bioassays, also called atypical toxicity, coincided with an absence of regulated toxins and rapid death times in mice observed in the assay. The present study describes pinnatoxin G as the main compound responsible for the toxicity observed using the mouse bioassay for lipophilic toxins. Using a well-characterised standard for pinnatoxin G, LC-MS/MS analysis of mussel samples collected from 2009 to 2012 revealed regular occurrences of pinnatoxin G at levels sufficient to account for the toxicity in the mouse bioassays. Baseline levels of pinnatoxin G from May to October usually exceeded 40 µg kg−1 in whole flesh, with a maximum in September 2010 of around 1200 µg kg−1. These concentrations were much greater than those at the other 10 sites selected for vigilance testing, where concentrations did not exceed 10 µg kg−1 in a 3-month survey from April to July 2010, and where rapid mouse deaths were not typically observed. Mussels were always more contaminated than clams, confirming that mussel is a good sentinel species for pinnatoxins. Profiles in mussels and clams were similar, with the concentration of pinnatoxin A less than 2% that of pinnatoxin G, and pteriatoxins were only present in non-quantifiable traces. Esters of pinnatoxin G could not be detected by analysis of extracts before and after alkaline hydrolysis. Analysis with a receptor-binding assay showed that natural pinnatoxin G was similarly active on the nicotinic acetylcholine receptor as chemically synthesized pinnatoxin G. Culture of Vulcanodinium rugosum, previously isolated from Ingril lagoon, confirmed that this alga is a pinnatoxin G producer (4.7 pg cell−1). Absence of this organism from the water column during prolonged periods of shellfish contamination and the dominance

Laser robot in the nuclear industry

International Nuclear Information System (INIS)

Contre, M.

1987-05-01

Possibilities of power lasers for welding, cutting, drilling, plugging surface treatment and hard-facing are reviewed. CO 2 and Nd:YAG lasers only have adequate power for nuclear applications. Radiation effects on lasers and contamination problems are examined. Then examples of applications to nuclear industry are given: PWR fuel fabrication, oxide thickness measurement in Magnox reactors, laser cutting of a cylindrical piece of steel on the bottom of a fuel channel in a gas graphite reactor, nuclear plant dismantling and fuel reprocessing. 51 refs [fr

Analysis of Hard Thin Film Coating

Science.gov (United States)

Shen, Dashen

1998-01-01

MSFC is interested in developing hard thin film coating for bearings. The wearing of the bearing is an important problem for space flight engine. Hard thin film coating can drastically improve the surface of the bearing and improve the wear-endurance of the bearing. However, many fundamental problems in surface physics, plasma deposition, etc, need further research. The approach is using electron cyclotron resonance chemical vapor deposition (ECRCVD) to deposit hard thin film an stainless steel bearing. The thin films in consideration include SiC, SiN and other materials. An ECRCVD deposition system is being assembled at MSFC.

Nanotoxicity: emerging concerns regarding nanomaterial safety and occupational hard metal (WC-Co) nanoparticle exposure.

Science.gov (United States)

Armstead, Andrea L; Li, Bingyun

As the number of commercial and consumer products containing engineered nanomaterials (ENMs) continually rises, the increased use and production of these ENMs presents an important toxicological concern. Although ENMs offer a number of advantages over traditional materials, their extremely small size and associated characteristics may also greatly enhance their toxic potentials. ENM exposure can occur in various consumer and industrial settings through inhalation, ingestion, or dermal routes. Although the importance of accurate ENM characterization, effective dosage metrics, and selection of appropriate cell or animal-based models are universally agreed upon as important factors in ENM research, at present, there is no "standardized" approach used to assess ENM toxicity in the research community. Of particular interest is occupational exposure to tungsten carbide cobalt (WC-Co) "dusts," composed of nano- and micro-sized particles, in hard metal manufacturing facilities and mining and drilling industries. Inhalation of WC-Co dust is known to cause "hard metal lung disease" and an increased risk of lung cancer; however, the mechanisms underlying WC-Co toxicity, the inflammatory disease state and progression to cancer are poorly understood. Herein, a discussion of ENM toxicity is followed by a review of the known literature regarding the effects of WC-Co particle exposure. The risk of WC-Co exposure in occupational settings and the updates of in vitro and in vivo studies of both micro- and nano-WC-Co particles are discussed.

Subgroup report on hard x-ray microprobes

International Nuclear Information System (INIS)

Ice, G.E.; Barbee, T.; Bionta, R.; Howells, M.; Thompson, A.C.; Yun, W.

1994-01-01

The increasing availability of synchrotron x-ray sources has stimulated the development of advanced hard x-ray (E≥5 keV) microprobes. New x-ray optics have been demonstrated which show promise for achieving intense submicron hard x-ray probes. These probes will be used for extraordinary elemental detection by x-ray fluorescence/absorption and for microdiffraction to identify phase and strain. The inherent elemental and crystallographic sensitivity of an x-ray microprobe and its inherently nondestructive and penetrating nature makes the development of an advanced hard x-ray microprobe an important national goal. In this workshop state-of-the-art hard x-ray microprobe optics were described and future directions were discussed. Gene Ice, Oak Ridge National Laboratory (ORNL), presented an overview of the current status of hard x-ray microprobe optics and described the use of crystal spectrometers to improve minimum detectable limits in fluorescent microprobe experiments. Al Thompson, Lawrence Berkeley Laboratory (LBL), described work at the Center for X-ray Optics to develop a hard x-ray microprobe based on Kirkpatrick-Baez (KB) optics. Al Thompson also showed the results of some experimental measurements with their KB optics. Malcolm Howells presented a method for bending elliptical mirrors and Troy Barbee commented on the use of graded d spacings to achieve highest efficiency in KB multilayer microfocusing. Richard Bionta, Lawrence Livermore National Laboratory (LLNL), described the development of the first hard x-ray zone plates and future promise of so called open-quotes jelly rollclose quotes or sputter slice zone plates. Wenbing Yun, Argonne National Laboratory (ANL), described characterization of jelly roll and lithographically produced zone plates and described the application of zone plates to focus extremely narrow bandwidths by nuclear resonance. This report summarizes the presentations of the workshop subgroup on hard x-ray microprobes

Analysis of the development and performance of hard disks

OpenAIRE

Novak, Davorin

2010-01-01

With the emergence of new technologies in the field of hard drives we can witness a significant increase of surface density and transfer rate of interfaces which, as a result, enables greater performance and reliability of hard disks. The reason for this are increasing needs for higher capacities and data transfer rate to or from the hard disk. This thesis presents the structure of hard drives, features, performance and reliability of hard drives and alternative data storage technologies. Par...

Radiation-Hard Quartz Cerenkov Calorimeters

International Nuclear Information System (INIS)

Akgun, U.; Onel, Y.

2006-01-01

New generation hadron colliders are going to reach unprecedented energies and radiation levels. Quartz has been identified as a radiation-hard material that can be used for Cerenkov calorimeters of the future experiments. We report from the radiation hardness tests performed on quartz fibers, as well as the characteristics of the quartz fiber and plate Cerenkov calorimeters that have been built, designed, and proposed for the CMS experiment

State of the art in hard-on-hard bearings: how did we get here and what have we achieved?

Science.gov (United States)

Zywiel, Michael G; Sayeed, Siraj A; Johnson, Aaron J; Schmalzried, Thomas P; Mont, Michael A

2011-03-01

Total hip arthroplasty has shown excellent results in decreasing pain and improving function in patients with degenerative disease of the hip. Improvements in prosthetic materials, designs and implant fixation have now resulted in wear of the bearing surface being the limitation of this technology, and a number of hard-on-hard couples have been introduced to address this concern. The purpose of this article is to review the origins, development, survival rates and potential advantages and disadvantages of the following hard-on-hard bearings for total hip arthroplasty: metal-on-metal standard total hip arthroplasty; metal-on-metal hip resurfacing arthroplasty, ceramic-on-ceramic total hip arthroplasty; and ceramic-on-metal bearings. Improvements in the manufacturing of metal-on-metal bearings over the past 50 years have resulted in implants that provide low wear rates and allow for the use of large femoral heads. However, concerns remain regarding elevated serum metal ion levels, potential teratogenic effects and potentially devastating adverse local tissue reactions, whose incidence and pathogenesis remains unclear. Modern total hip resurfacing has shown excellent outcomes over 10 years in the hands of experienced surgeons. Current ceramic-on-ceramic bearings have demonstrated excellent survival with exceptionally low wear rates and virtually no local adverse effects. Concerns remain for insertional chipping, in vivo fracture and the variable incidence of squeaking. Contemporary ceramic-on-metal interfaces are in the early stages of clinical use, with little data reported to date. Hard-on-hard bearings for total hip arthroplasty have improved dramatically over the past 50 years. As bearing designs continue to improve with new and modified materials and improved manufacturing techniques, it is likely that the use of hard-on-hard bearings will continue to increase, especially in young and active patients.

Hard processes in hadronic interactions

International Nuclear Information System (INIS)

Satz, H.; Wang, X.N.

1995-01-01

Quantum chromodynamics is today accepted as the fundamental theory of strong interactions, even though most hadronic collisions lead to final states for which quantitative QCD predictions are still lacking. It therefore seems worthwhile to take stock of where we stand today and to what extent the presently available data on hard processes in hadronic collisions can be accounted for in terms of QCD. This is one reason for this work. The second reason - and in fact its original trigger - is the search for the quark-gluon plasma in high energy nuclear collisions. The hard processes to be considered here are the production of prompt photons, Drell-Yan dileptons, open charm, quarkonium states, and hard jets. For each of these, we discuss the present theoretical understanding, compare the resulting predictions to available data, and then show what behaviour it leads to at RHIC and LHC energies. All of these processes have the structure mentioned above: they contain a hard partonic interaction, calculable perturbatively, but also the non-perturbative parton distribution within a hadron. These parton distributions, however, can be studied theoretically in terms of counting rule arguments, and they can be checked independently by measurements of the parton structure functions in deep inelastic lepton-hadron scattering. The present volume is the work of Hard Probe Collaboration, a group of theorists who are interested in the problem and were willing to dedicate a considerable amount of their time and work on it. The necessary preparation, planning and coordination of the project were carried out in two workshops of two weeks' duration each, in February 1994 at CERn in Geneva andin July 1994 at LBL in Berkeley

Theory of hard diffraction and rapidity gaps

International Nuclear Information System (INIS)

Del Duca, V.

1995-06-01

In this talk we review the models describing the hard diffractive production of jets or more generally high-mass states in presence of rapidity gaps in hadron-hadron and lepton-hadron collisions. By rapidity gaps we mean regions on the lego plot in (pseudo)-rapidity and azimuthal angle where no hadrons are produced, between the jet(s) and an elastically scattered hadron (single hard diffraction) or between two jets (double hard diffraction). (orig.)

Seismic signals hard clipping overcoming

Science.gov (United States)

Olszowa, Paula; Sokolowski, Jakub

2018-01-01

In signal processing the clipping is understand as the phenomenon of limiting the signal beyond certain threshold. It is often related to overloading of a sensor. Two particular types of clipping are being recognized: soft and hard. Beyond the limiting value soft clipping reduces the signal real gain while the hard clipping stiffly sets the signal values at the limit. In both cases certain amount of signal information is lost. Obviously if one possess the model which describes the considered signal and the threshold value (which might be slightly more difficult to obtain in the soft clipping case), the attempt of restoring the signal can be made. Commonly it is assumed that the seismic signals take form of an impulse response of some specific system. This may lead to belief that the sine wave may be the most appropriate to fit in the clipping period. However, this should be tested. In this paper the possibility of overcoming the hard clipping in seismic signals originating from a geoseismic station belonging to an underground mine is considered. A set of raw signals will be hard-clipped manually and then couple different functions will be fitted and compared in terms of least squares. The results will be then analysed.

Panorama 2010: Short-term trends in the gas industry

International Nuclear Information System (INIS)

Lecarpentier, A.

2010-01-01

After a period of strong expansion that lasted for most of 2008, the gas industry was hard hit by the impact of the economic recession. Although the competitiveness of the gas price was often an advantage in 2009, the natural gas market saw a net decline in consumption that led to a historic decrease in world production and international trade. In addition, the subsequent collapse of market prices gave LNG a competitive edge in the Atlantic Basin, where surplus gas continued to accumulate, heralding a long 'gas bubble' period that the industry will have to adjust to permit harmonious, long-term development of the gas markets. (author)

Molecular characteristics of hemoglobins in blood clam and their immune responses to bacterial infection.

Science.gov (United States)

Xu, Bin; Zhang, Yanan; Jing, Zhao; Fan, Tingjun

2017-06-01

Bivalve hemoglobins have antibacterial activities, while the underlying mechanisms remain poorly understood. In our study, three full-length cDNAs of hemoglobins from blood clam skHbs were obtained, encoding putative polypeptides of 147, 150, and 152 amino acids, respectively. Predicted advanced protein structures showed that the skHbs had amphipathic antibacterial structures, displayed the typical structural characteristics of proteins with globin-like fold containing numerous alpha-helixes, and forming a homodimeric skHbI and a heterotetrameric skHbII complex. After injected with alive and heat-killed Gram-positive bacteria Bacillus subtilis, the mRNA levels of skHbI and skHbII were both significantly upregulated through increasing the expression of peptidoglycan recognition protein-like (PGRP-like) protein and Toll-like receptor (TLR-like) protein induced by peptidoglycan on the surface of the bacteria, but there were no obvious differences in their protein levels. Besides, reactive oxygen species (ROS) was detected to participate in the resistance to B. subtilis. These implied that skHbs could involve in the innate immune responses to Gram-positive bacterial infection directly with their amphipathic structures and indirectly by increasing ROS production through PGRP triggering Toll pathway. In conclusion, our findings reveal the structural characteristics of skHbs and their mechanism against Gram-positive bacteria thereby providing the molecular evidence for fundamental innate antibacterial activities by invoking respiratory proteins. Copyright © 2017 Elsevier B.V. All rights reserved.

Geophysical Properties of Hard Rock for Investigation of Stress Fields in Deep Mines

Science.gov (United States)

Tibbo, M.; Young, R. P.; Schmitt, D. R.; Milkereit, B.

2014-12-01

A complication in geophysical monitoring of deep mines is the high-stress dependency of the physical properties of hard rocks. In-mine observations show anisotropic variability of the in situ P- and S-wave velocities and resistivity of the hard rocks that are likely related to stress field changes. As part of a comprehensive study in a deep, highly stressed mine located in Sudbury, Ontario, Canada, data from in situ monitoring of the seismicity, conductivity, stress, and stress dependent physical properties has been obtain. In-laboratory experiments are also being performed on borehole cores from the Sudbury mines. These experiments will measure the Norite borehole core's properties including elastic modulus, bulk modulus, P- and S-wave velocities, and density. Hydraulic fracturing has been successfully implemented in industries such as oil and gas and enhanced geothermal systems, and is currently being investigated as a potential method for preconditioning in mining. However, further research is required to quantify how hydraulic fractures propagate through hard, unfractured rock as well as naturally fractured rock typically found in mines. These in laboratory experiments will contribute to a hydraulic fracturing project evaluating the feasibility and effectiveness of hydraulic fracturing as a method of de-stressing hard rock mines. A tri-axial deformation cell equipped with 18 Acoustic Emission (AE) sensors will be used to bring the borehole cores to a tri-axial state of stress. The cores will then be injected with fluid until the the hydraulic fracture has propagated to the edge of the core, while AE waveforms will be digitized continuously at 10 MHz and 12-bit resolution for the duration of each experiment. These laboratory hydraulic fracture experiments will contribute to understanding how parameters including stress ratio, fluid injection rate, and viscosity, affect the fracturing process.

Rotation of hard particles in a soft matrix

Science.gov (United States)

Yang, Weizhu; Liu, Qingchang; Yue, Zhufeng; Li, Xiaodong; Xu, Baoxing

Soft-hard materials integration is ubiquitous in biological materials and structures in nature and has also attracted growing attention in the bio-inspired design of advanced functional materials, structures and devices. Due to the distinct difference in their mechanical properties, the rotation of hard phases in soft matrixes upon deformation has been acknowledged, yet is lack of theory in mechanics. In this work, we propose a theoretical mechanics framework that can describe the rotation of hard particles in a soft matrix. The rotation of multiple arbitrarily shaped, located and oriented particles with perfectly bonded interfaces in an elastic soft matrix subjected to a far-field tensile loading is established and analytical solutions are derived by using complex potentials and conformal mapping methods. Strong couplings and competitions of the rotation of hard particles among each other are discussed by investigating numbers, relative locations and orientations of particles in the matrix at different loading directions. Extensive finite element analyses are performed to validate theoretical solutions and good agreement of both rotation and stress field between them are achieved. Possible extensions of the present theory to non-rigid particles, viscoelastic matrix and imperfect bonding are also discussed. Finally, by taking advantage of the rotation of hard particles, we exemplify an application in a conceptual design of soft-hard material integrated phononic crystal and demonstrate that phononic band gaps can be successfully tuned with a high accuracy through the mechanical tension-induced rotation of hard particles. The present theory established herein is expected to be of immediate interests to the design of soft-hard materials integration based functional materials, structures and devices with tunable performance via mechanical rotation of hard phases.

Industrial-scale application of Lactobacillus reuteri coupled with glycerol as a biopreservation system for inhibiting Clostridium tyrobutyricum in semi-hard ewe milk cheese.

Science.gov (United States)

Ávila, Marta; Gómez-Torres, Natalia; Delgado, David; Gaya, Pilar; Garde, Sonia

2017-09-01

The suitability of the biopreservation system formed by reuterin-producing L. reuteri INIA P572 and glycerol (required for reuterin production) to prevent late blowing defect (LBD) was evaluated in industrial sized semi-hard ewe milk cheese contaminated with Clostridium tyrobutyricum INIA 68, a wild strain isolated from a LBD cheese. For this purpose, six batches of cheese were made (three with and three without clostridial spores): control cheeses with lactococci starter, cheeses with L. reuteri as adjunct, and cheeses with L. reuteri and 30 mM glycerol. Spores of C. tyrobutyricum INIA 68 germinated during pressing of cheese curd, causing butyric acid fermentation in cheese after 30 d of ripening. The addition of L. reuteri, without glycerol, enhanced the symptoms and the formation of volatile compounds associated with LBD. When glycerol was added to cheese milk contaminated with C. tyrobutyricum, L. reuteri was able to produce reuterin in cheese resulting in cheeses with a uniform cheese matrix and a volatile profile similar to cheese made with L. reuteri and glycerol (without spores). Accordingly, L. reuteri INIA P572 coupled with glycerol seems a novel biopreservation system to inhibit Clostridium growth and prevent LBD by means of in situ reuterin production. Copyright © 2017 Elsevier Ltd. All rights reserved.

Comparative face-shear piezoelectric properties of soft and hard PZT ceramics

Science.gov (United States)

Miao, Hongchen; Chen, Xi; Cai, Hairong; Li, Faxin

2015-12-01

The face-shear ( d 36 ) mode may be the most practical shear mode in piezoelectrics, while theoretically this mode cannot appear in piezoelectric ceramics because of its transversally isotropic symmetry. Recently, we realized piezoelectric coefficient d 36 up to 206pC/N in soft PbZr1-xTixO3 (PZT) ceramics via ferroelastic domain engineering [H. C. Miao and F. X. Li, Appl. Phys. Lett. 107, 122902 (2015)]. In this work, we further realized the face-shear mode in both hard and soft PZT ceramics including PZT-4 (hard), PZT-51(soft), and PZT-5H (soft) and investigated the electric properties systematically. The resonance methods are derived to measure the d 36 coefficients using both square patches and narrow bar samples, and the obtained values are consistent with that measured by a modified d 33 meter previously. For all samples, the pure d 36 mode can only appear near the resonance frequency, and the coupled d 36 - d 31 mode dominates off resonance. It is found that both the piezoelectric coefficient d 36 and the electromechanical coupling factor k 36 of soft PZT ceramics (PZT-5H and PZT-51) are considerably larger than those of the hard PZT ceramics (PZT-4). The obtained d 36 of 160-275pC/N, k 36 ˜ 0.24, and the mechanical quality factor Q 36 of 60-90 in soft PZT ceramics are comparable with the corresponding properties of the d 31 mode sample. Therefore, the d 36 mode in modified soft PZT ceramics is more promising for industrial applications such as face-shear resonators and shear horizontal wave generators.

TECHNOLOGICAL AND ECOLOGICAL SAFETY IN ASPECT OF CHEMICAL PROPERTIES OF RECYCLED NEODYMIUM MAGNETS - ELECTRIC MO-TORS AND HARD DISK

Directory of Open Access Journals (Sweden)

Katarzyna Kapustka

2018-01-01

Full Text Available Neodymium magnets currently dominate the magnet market due to their superior magnetic proper-ties with maximum volume minimization. In this paper, the results of X-ray analysis for two types of magnetic powder obtained from the recovered magnets traditionally used in electric motors and hard disk have been presented. The NdFeB magnets are composed of 25-35 wt. % rare earth elements (RE and the rest being transition metals (mainly Fe.. RE, other than Nd, such Dy, Pr, Tb and Gd or exogen elements, other than Fe, such as Al, Co, Ga, Nb, Si, Cu and Zr can also be present as minor admixtures. This paper brings an opportunity to introduce the hard magnets recycling technology on an industrial scale.

Theory of hard diffraction and rapidity gaps

International Nuclear Information System (INIS)

Del Duca, V.

1996-01-01

In this talk we review the models describing the hard diffractive production of jets or more generally high-mass states in presence of rapidity gaps in hadron-hadron and lepton-hadron collisions. By rapidity gaps we mean regions on the lego plot in (pseudo)-rapidity and azimuthal angle where no hadrons are produced, between the jet(s) and an elastically scattered hadron (single hard diffraction) or between two jets (double hard diffraction). copyright 1996 American Institute of Physics

Update on the modernization of 200 MW hard coal power plants in Poland

International Nuclear Information System (INIS)

Szabo, T.E.; Kopec, M.

1993-01-01

In June 1990, the Coalition of 200 MW, Hard Coal, Polish Power Plants representing an installed base of 10,240 MW, including 45 units of 200 MW, signed an agreement with the Westinghouse Electric Corporation, Power Generation Business Unit, based in Orlando, Florida, to cooperate on developing a modernization program for the 200 MW units. Program funding was obtained with The United States Trade Development Program (TDP) providing approximately 2/3 of the cost, and the balance provided by Westinghouse. On March 5, 1992, the Polish-American (51% Westinghouse, 49% Seven (7) Hard Coal Power Plants), Joint Venture Company, MODELPOL, Ltd. (Polish acronym for 'MODernizacja ELektrowni POLskich' or Modernization of Polish Power Plants) was established with the goal to implement not only technically but financially the recommendations of the Modernization Study. The mission given MODELPOL, Ltd. by their Polish-American Shareholders was to: develop the specific modernization programs for each hard coal power plant; assist in identifying and obtaining the financial resources required for implementation; and provide technological preventative maintenance services to improve unit availability. Within these aims was the target to reduce SO 2 , and particulate emissions. The first program is taking place at the Laziska Power Plant, followed by Rybnik. Further projects are in the planning stages. Finance is a constant problem, this should be eased by the restructuring of the power industry. Future programmes include connection to the European Community Power Grid. 5 figs

Forecasting noise and radiation hardness of CMOS front-end electronics beyond the 100 nm frontier

International Nuclear Information System (INIS)

Re, V.; Gaioni, L.; Manghisoni, M.; Ratti, L.; Traversi, G.

2010-01-01

The progress of industrial microelectronic technologies has already overtaken the 130 nm CMOS generation that is currently the focus of IC designers for new front-end chips in LHC upgrades and other detector applications. In a broader time span, sub-100 nm CMOS processes may become appealing for the design of very compact front-end systems with advanced integrated functionalities. This is especially true in the case of pixel detectors, both for monolithic devices (MAPS) and for hybrid implementations where a high resistivity sensor is connected to a CMOS readout chip. Technologies beyond the 100 nm frontier have peculiar features, such as the evolution of the device gate material to reduce tunneling currents through the thin dielectric. These new physical device parameters may impact on functional properties such as noise and radiation hardness. On the basis of experimental data relevant to commercial devices, this work studies potential advantages and challenges associated to the design of low-noise and rad-hard analog circuits in these aggressively scaled technologies.

Hard X-ray studies on the Castor tokamak

International Nuclear Information System (INIS)

Mlynar, J.

1990-04-01

The electron runaway processes in tokamaks are discussed with regard to hard X radiation measurements. The origin and confinement of runaway electrons, their bremsstrahlung spectra and the influence of lower hybrid current drive on the distribution of high-energy electrons are analyzed for the case of the Castor tokamak. The hard X-ray spectrometer designed for the Castor tokamak is also described and preliminary qualitative results of hard X-ray measurements are presented. The first series of integral measurements made it possible to map the azimuthal dependence of the hard X radiation

Measurement of fatigue in industries.

Science.gov (United States)

Saito, K

1999-04-01

Fatigue of workers is a complex phenomenon resulting from various factors in technically innovated modern industries, and it appears as a feeling of exhaustion, lowering of physiological functions, breakdown of autonomic nervous balance, and decrease in work efficiency. On the other hand industrial fatigue is caused by excessive workload, remarkable alteration in working posture and diurnal and nocturnal rhythms in daily life. Working modes in modern industries have changed from work with the whole body into that with the hands, arms, legs and/or eyes which are parts of the body, and from physical work to mental work. Visual display terminal (VDT) work is one of the most characteristic jobs in the various kinds of workplaces. A large number of fatigue tests have already been adopted, but it is still hard to draw a generalized conclusion as to the method of selecting the most appropriate test battery for a given work load. As apparatus for fatigue measurement of VDT work we have developed VRT (Visual Reaction Test) and the Portable Fatigue Meter. Furthermore, we have presented immune parameters of peripheral blood and splenic T cells for physical fatigue.

Randomized Caches Can Be Pretty Useful to Hard Real-Time Systems

Directory of Open Access Journals (Sweden)

Enrico Mezzetti

2015-03-01

Full Text Available Cache randomization per se, and its viability for probabilistic timing analysis (PTA of critical real-time systems, are receiving increasingly close attention from the scientific community and the industrial practitioners. In fact, the very notion of introducing randomness and probabilities in time-critical systems has caused strenuous debates owing to the apparent clash that this idea has with the strictly deterministic view traditionally held for those systems. A paper recently appeared in LITES (Reineke, J. (2014. Randomized Caches Considered Harmful in Hard Real-Time Systems. LITES, 1(1, 03:1-03:13. provides a critical analysis of the weaknesses and risks entailed in using randomized caches in hard real-time systems. In order to provide the interested reader with a fuller, balanced appreciation of the subject matter, a critical analysis of the benefits brought about by that innovation should be provided also. This short paper addresses that need by revisiting the array of issues addressed in the cited work, in the light of the latest advances to the relevant state of the art. Accordingly, we show that the potential benefits of randomized caches do offset their limitations, causing them to be - when used in conjunction with PTA - a serious competitor to conventional designs.

Characterization of waste waters of tannery, fertilizer and textile industries in Multan region

International Nuclear Information System (INIS)

Ansan, T.M.; Malik, S.A.

2001-01-01

This study evaluates various physico-chemical characteristics such as pH, electrical conductivity, dissolved solids, hardness, apparent color, odor, elemental concentrations, chloride contents, carbonates, bicarbonates, residual sodium carbonate and sodium absorption ratio of waste waters of three major industries, i.e. tannery, fertilizer and textile, situated in Multan District of the Punjab province, Pakistan. Waste waters, in general, have been found to be hard, alkaline in nature and contain variable amounts of dissolved solids. High concentration of chromium (10.7 mg 1-1) was found in tannery wastewater. Zinc and copper concentrations were not quantifiable. Water quality classes (C4-S4), (C4-S1) and (C4-S1, C3-S1, C3-S4 and C3-S2) have been assigned to tannery, fertilizer and textile waste waters respectively. Results indicate that these untreated industrial waste waters are potential hazards to human health and unsuitable for irrigation usage. (author)

Hard exclusive QCD processes

Energy Technology Data Exchange (ETDEWEB)

Kugler, W.

2007-01-15

Hard exclusive processes in high energy electron proton scattering offer the opportunity to get access to a new generation of parton distributions, the so-called generalized parton distributions (GPDs). This functions provide more detailed informations about the structure of the nucleon than the usual PDFs obtained from DIS. In this work we present a detailed analysis of exclusive processes, especially of hard exclusive meson production. We investigated the influence of exclusive produced mesons on the semi-inclusive production of mesons at fixed target experiments like HERMES. Further we give a detailed analysis of higher order corrections (NLO) for the exclusive production of mesons in a very broad range of kinematics. (orig.)

Soft and hard pomerons

International Nuclear Information System (INIS)

Maor, Uri; Tel Aviv Univ.

1995-09-01

The role of s-channel unitarity screening corrections, calculated in the eikonal approximation, is investigated for soft Pomeron exchange responsible for elastic and diffractive hadron scattering in the high energy limit. We examine the differences between our results and those obtained from the supercritical Pomeron-Regge model with no such corrections. It is shown that screening saturation is attained at different scales for different channels. We then proceed to discuss the new HERA data on hard (PQCD) Pomeron diffractive channels and discuss the relationship between the soft and hard Pomerons and the relevance of our analysis to this problem. (author). 18 refs, 9 figs, 1 tab