Laue 2007: international workshop on advanced Laue diffraction in frontier science

International Nuclear Information System (INIS)

Adachi, S.I.; Akgul, G.; Aksoy, F.; Andersen, K.; Andersson, M.; Anfinrud, Ph.; Baruchel, J.; Bastie, P.; Bau, R.; Blakeley, M.; Bourgeois, D.; Brau, D.; Bravin, A.; Cammarata, M.; Christensen, M.; Cole, J.; Courtois, P.; Cousson, A.; Eggonopoulos-Papadopoulos, B.; Daoud-Aladine, M.A.; Dera, P.; Feng, R.; Fiedler, St.; Fischer, H.; Fisher, St.; Folami, S.; Fosu, M.A.; Fuente, F.; Fullagar, W.; Fulla Marsa, D.; Ghosh, R.; Giles, C.; Goossens, D.; Goujon, A.; Gutmann, M.; Heger, G.; Henry, E.; Hewat, A.; Hossmann, Ch.; Ivanov, A.; Jauch, W.; Jorgensen, R.; Katona, G.; Keen, D.; Kong, Q.; Koshihara, Sh.Y.; Lauss, B.; Laue, M.V.; Lecomte, C.; Legrand, V.; Lemee-Cailleau, M.H.; Marmeggi, J.C.; Martinez-Criado, G.; Mason, S.; McIntyre, G.; Mailleur, F.; Micha, J.S.; Moffat, K.; Mohammed Mustapha, A.; Ouladdiaf, B.; Pahl, R.; Parise, J.; Pearson, A.; Pecaut, J.; Popov, A.; Prokleska, J.; Raitman, E.; Ren, Z.; Rodriguez-Carvajal, J.; Sasaki, J.; Schmidt, M.; Schotte, F.; Stirling, W.; Suominen Fuller, M.; Tanaka, I.; Timmins, P.; Tomking, P.; Turner, M.; Van Thor, J.; Vettier, Ch.; Wildes, A.; Wilson, Ch.; Wohri, A.; Wulf, M.; Zhao, Y.

2007-01-01

Laue diffraction is currently undergoing a lively renaissance due to new instrumental developments at both synchrotron X-ray and neutron sources. The aim of the workshop Laue-2007 is to offer state-of-the-art experimental methods and hands-on experience of data analysis for exploration, using single-crystal Laue diffraction, of the crystalline structure of complex materials in extreme cases. The oral sessions cover the following topics: -) history and renaissance of Laue diffraction, -) modern X-ray techniques, -) modern neutron techniques, -) applications, -) analysis and software demonstrations including hands-on experience, and -) future directions. This document gathers the abstracts of the presentations and of the posters

Laue 2007: international workshop on advanced Laue diffraction in frontier science

Energy Technology Data Exchange (ETDEWEB)

Adachi, S I; Akgul, G; Aksoy, F; Andersen, K; Andersson, M; Anfinrud, Ph; Baruchel, J; Bastie, P; Bau, R; Blakeley, M; Bourgeois, D; Brau, D; Bravin, A; Cammarata, M; Christensen, M; Cole, J; Courtois, P; Cousson, A; Eggonopoulos-Papadopoulos, B; Daoud-Aladine, M A; Dera, P; Feng, R; Fiedler, St; Fischer, H; Fisher, St; Folami, S; Fosu, M A; Fuente, F; Fullagar, W; Fulla Marsa, D; Ghosh, R; Giles, C; Goossens, D; Goujon, A; Gutmann, M; Heger, G; Henry, E; Hewat, A; Hossmann, Ch; Ivanov, A; Jauch, W; Jorgensen, R; Katona, G; Keen, D; Kong, Q; Koshihara, Sh Y; Lauss, B; Laue, M V; Lecomte, C; Legrand, V; Lemee-Cailleau, M H; Marmeggi, J C; Martinez-Criado, G; Mason, S; McIntyre, G; Mailleur, F; Micha, J S; Moffat, K; Mohammed Mustapha, A; Ouladdiaf, B; Pahl, R; Parise, J; Pearson, A; Pecaut, J; Popov, A; Prokleska, J; Raitman, E; Ren, Z; Rodriguez-Carvajal, J; Sasaki, J; Schmidt, M; Schotte, F; Stirling, W; Suominen Fuller, M; Tanaka, I; Timmins, P; Tomking, P; Turner, M; Van Thor, J; Vettier, Ch; Wildes, A; Wilson, Ch; Wohri, A; Wulf, M; Zhao, Y

2007-07-01

Laue diffraction is currently undergoing a lively renaissance due to new instrumental developments at both synchrotron X-ray and neutron sources. The aim of the workshop Laue-2007 is to offer state-of-the-art experimental methods and hands-on experience of data analysis for exploration, using single-crystal Laue diffraction, of the crystalline structure of complex materials in extreme cases. The oral sessions cover the following topics: -) history and renaissance of Laue diffraction, -) modern X-ray techniques, -) modern neutron techniques, -) applications, -) analysis and software demonstrations including hands-on experience, and -) future directions. This document gathers the abstracts of the presentations and of the posters.

Ninth Thermal and Fluids Analysis Workshop Proceedings

Science.gov (United States)

Sakowski, Barbara (Compiler)

1999-01-01

The Ninth Thermal and Fluids Analysis Workshop (TFAWS 98) was held at the Ohio Aerospace Institute in Cleveland, Ohio from August 31 to September 4, 1998. The theme for the hands-on training workshop and conference was "Integrating Computational Fluid Dynamics and Heat Transfer into the Design Process." Highlights of the workshop (in addition to the papers published herein) included an address by the NASA Chief Engineer, Dr. Daniel Mulville; a CFD short course by Dr. John D. Anderson of the University of Maryland; and a short course by Dr. Robert Cochran of Sandia National Laboratories. In addition, lectures and hands-on training were offered in the use of several cutting-edge engineering design and analysis-oriented CFD and Heat Transfer tools. The workshop resulted in international participation of over 125 persons representing aerospace and automotive industries, academia, software providers, government agencies, and private corporations. The papers published herein address issues and solutions related to the integration of computational fluid dynamics and heat transfer into the engineering design process. Although the primary focus is aerospace, the topics and ideas presented are applicable to many other areas where these and other disciplines are interdependent.

ATLAS TRT 2002 Workshop

CERN Multimedia

Capeans, M.

Starting on 17th May, the ATLAS TRT 2002 Workshop was organised by Ken MacFarlane and his team at Hampton University, Virginia, USA. During a welcome break in the very dense workshop programme, the group enjoyed a half-day long boat trip along the waterways, offering a first-hand look at the history and heritage of this part of America. The attendance during the six-day workshop was about 50 people representing most of the collaborating institutes, although many Russian colleagues had stayed in their institutes to pursue the start-up of end-cap wheel production at PNPI and DUBNA. The meeting clearly showed that, during the year 2002, the TRT community is focusing on final design issues and module/wheel construction, while moving at the same time towards acceptance testing and integration, including the front-end electronics. The two main topics treated at the workshop were the preparation for beginning full production of the FE electronics, and the wire-joint problem that the US barrel colleagues have been fa...

NKS Workshop on Radioanalytical Chemistry - Final report

DEFF Research Database (Denmark)

The NKS-B workshop on radioanalytical chemistry was held 2-6th Sept 2013 at Risø, Denmark. There were a total of 49 persons participating in the workshop, including 32 young participants and 15 lecturers. The work-shop started with 3 days of lab practice followed by 1.5 day’s lectures by the expe......The NKS-B workshop on radioanalytical chemistry was held 2-6th Sept 2013 at Risø, Denmark. There were a total of 49 persons participating in the workshop, including 32 young participants and 15 lecturers. The work-shop started with 3 days of lab practice followed by 1.5 day’s lectures...

Reports on the 2015 AAAI Workshop Program

OpenAIRE

Albrecht, Stefano V.; Beck, J. Christopher; Buckeridge, David L.; Botea, Adi; Caragea, Cornelia; Chi, Chi-hung; Damoulas, Theodoros; Dilkina, Bistra; Eaton, Eric; Fazli, Pooyan; Ganzfried, Sam; Giles, C. Lee; Guillet, Sébastian; Holte, Robert; Hutter, Frank

2015-01-01

AAAI's 2015 Workshop Program was held Sunday and Monday, January 25–26, 2015 at the Hyatt Regency Austin Hotel in Austion, Texas, USA. The AAAI-15 workshop program included 15 workshops covering a wide range of topics in artificial intelligence. Most workshops were held on a single day. The titles of the workshops included AI and Ethics, AI for Cities, AI for Transportation: Advice, Interactivity and Actor Modeling, Algorithm Configuration, Artificial Intelligence Applied to Assistive Technol...

Document Questionnaires and Datasets with DDI: A Hands-On Introduction with Colectica

OpenAIRE

Iverson, Jeremy; Smith, Dan

2018-01-01

This workshop offers a hands-on, practical approach to creating and documenting both surveys and datasets with DDI and Colectica. Participants will build and field a DDI-driven survey using their own questions or samples provided in the workshop. They will then ingest, annotate, and publish DDI dataset descriptions using the collected survey data.

OECD/CSNI Workshop on Best Estimate Methods and Uncertainty Evaluations - Workshop Proceedings

International Nuclear Information System (INIS)

2013-01-01

Best-Estimate Methods plus Uncertainty Evaluation are gaining increased interest in the licensing process. On the other hand, lessons learnt from the BEMUSE (NEA/CSNI/R(2011)3) and SM2A (NEA/CSNI/R(2011)3) benchmarks, progress of UAM benchmark, and answers to the WGAMA questionnaire on the Use of Best-Estimate Methodologies show that improvements of the present methods are necessary and new applications appear. The objective of this workshop is to provide a forum for a wide range of experts to exchange information in the area of best estimate analysis and uncertainty evaluation methods and address issues drawn-up from BEMUSE, UAM and SM2A activities. Both, improvement of existing methods and recent new developments are included. As a result of the workshop development, a set of recommendations, including lines for future activities were proposed. The organisation of the Workshop was divided into three parts: Opening session including key notes from OECD and IAEA representatives, Technical sessions, and a Wrap-up session. All sessions included a debate with participation from the audience constituted by 71 attendees. The workshop consisted of four technical sessions: a) Development achievements of BEPU methods and State of the Art: The objective of this session was to present the different approaches to deal with Best Estimate codes and uncertainties evaluations. A total of six papers were presented. One initial paper summarized the existing methods; the following open papers were focused on specific methods stressing their bases, peculiarities and advantages. As a result of the session a picture of the current State of the Art was obtained. b) International comparative activities: This session reviewed the set of international activities around the subject of BEPU methods benchmarking and development. From each of the activities a description of the objectives, development, main results, conclusions and recommendations (in case it is finalized) was presented. This

Reports on the AAAI 1999 Workshop Program

OpenAIRE

Drabble, Brian; Chaudron, Laurent; Tessier, Catherine; Abu-Hakima, Sue; Willmott, Steven; Austin, Jim; Faltings, Boi; Freuder, Eugene C.; Friedrich, Gerhard; Freitas, Alex A.; Cortes, U.; Sanchez-Marre, M.; Aha, David W.; Becerra-Fernandez, Irma; Munoz-Avila, Hector

2000-01-01

The AAAI-99 Workshop Program (a part of the sixteenth national conference on artificial intelligence) was held in Orlando, Florida. The program included 16 workshops covering a wide range of topics in AI. Each workshop was limited to approximately 25 to 50 participants. Participation was by invitation from the workshop organizers. The workshops were Agent-Based Systems in the Business Context, Agents' Conflicts, Artificial Intelligence for Distributed Information Networking, Artificial Intell...

Business, Government, and Law on the Internet. A Hands-On Second Edition. Workshop. Internet Workshop Series Number 3.

Science.gov (United States)

Peete, Gary R.

This "workshop-in-a-book" is a much-expanded second edition designed for the businessperson, legal researcher, information specialist, consumer, student, or scholar wanting to discover information in three overlapping areas: business, government, and law. The book is divided into two modules: (1) "The World Wide Web: Your Entree to…

Workshop report: US-China workshop on smart structures and smart systems

Science.gov (United States)

Tomizuka, Masayoshi

2006-03-01

A Joint U.S.-China workshop on the topic of Integrated Sensing Systems, Mechatronics and Smart Structures Technologies was held in Jinan, China in October 2005 to evaluate the current status of research and education in the topic areas in the United States and China, to identify critical and strategic research and educational issues of mutual interest, and to identify joint research projects and potential research teams for collaborative research activities. The workshop included a series of presentations by leading researchers and educators from the United States and China and group discussions on the workshop objectives.

Science Thought and Practices: A Professional Development Workshop on Teaching Scientific Reasoning, Mathematical Modeling and Data Analysis

Science.gov (United States)

Robbins, Dennis; Ford, K. E. Saavik

2018-01-01

The NSF-supported “AstroCom NYC” program, a collaboration of the City University of New York and the American Museum of Natural History (AMNH), has developed and offers hands-on workshops to undergraduate faculty on teaching science thought and practices. These professional development workshops emphasize a curriculum and pedagogical strategies that uses computers and other digital devices in a laboratory environment to teach students fundamental topics, including: proportional reasoning, control of variables thinking, experimental design, hypothesis testing, reasoning with data, and drawing conclusions from graphical displays. Topics addressed here are rarely taught in-depth during the formal undergraduate years and are frequently learned only after several apprenticeship research experiences. The goal of these workshops is to provide working and future faculty with an interactive experience in science learning and teaching using modern technological tools.

Designing persuasive interactive environments : a hands-on workshop to explore interactivity and persuasion in design

NARCIS (Netherlands)

Rozendaal, Marco; Bekker, Tilde; Vermeeren, Arnold; Kanis, Marije; Aprile, Walter; van der Helm, Aadjan; Middendorf, Wouter

2012-01-01

Ambient Intelligent environments are interactive environments that sense human behaviour and can respond intelligently. This workshop explores how interactive environments can be designed with persuasive quality, influencing human experience and behaviour. The workshop follows a

Geoscience Information for Teachers (GIFT) Workshops at the European Geoscience Union General Assembly

Science.gov (United States)

Macko, S. A.; Arnold, E. M.; Laj, C. E.; Barnikel, F.; Berenguer, J. L.; Schwarz, A.; Cifelli, F.; Smith, P.; Funiciello, F.; Summesberger, H.

2017-12-01

GIFT workshops are teacher enhancement workshops organized by the EGU Committee on Education and held in conjunction with the EGU annual General Assembly. The program focuses on a different general theme each year. Past themes have included, for example, "Energy and Sustainable Development", "The Carbon Cycle", "Mineral Resources", "The Solar System And Beyond" and "The Mediterranean". These workshops combine scientific presentations on current research in Earth and Space Sciences, given by prominent scientists attending EGU General Assemblies, with hands-on, inquiry-based activities that can be used by the teachers in their classrooms to explain related scientific principles or topics. Participating teachers are also invited to present their own classroom activities to their colleagues, regardless of the scientific topic. The main objective of these workshops is to communicate first-hand scientific information to teachers in primary and secondary schools, significantly shortening the time between discovery and textbook. The GIFT workshop provides the teachers with materials that can be directly incorporated into their classroom, as well as those of their colleagues at home institutions. In addition, the full immersion of science teachers in a truly scientific context (EGU General Assemblies) and the direct contact with leading geoscientists stimulates curiosity towards research that the teachers can transmit to their pupils. In addition to their scientific content, the GIFT workshops are of high societal value. The value of bringing teachers from many nations together includes the potential for networking and collaborations, the sharing of experiences and an awareness of science education as it is presented in other countries. Since 2003, the EGU GIFT workshops have brought together more than 700 teachers from more than 25 nations. At all previous EGU GIFT workshops teachers mingled with others from outside their own country and informally interacted with the

MO-AB-210-03: Workshop

International Nuclear Information System (INIS)

Lu, Z.

2015-01-01

The goal of this ultrasound hands-on workshop is to demonstrate advancements in high intensity focused ultrasound (HIFU) and to demonstrate quality control (QC) testing in diagnostic ultrasound. HIFU is a therapeutic modality that uses ultrasound waves as carriers of energy. HIFU is used to focus a beam of ultrasound energy into a small volume at specific target locations within the body. The focused beam causes localized high temperatures and produces a well-defined regions of necrosis. This completely non-invasive technology has great potential for tumor ablation and targeted drug delivery. At the workshop, attendees will see configurations, applications, and hands-on demonstrations with on-site instructors at separate stations. The involvement of medical physicists in diagnostic ultrasound imaging service is increasing due to QC and accreditation requirements. At the workshop, an array of ultrasound testing phantoms and ultrasound scanners will be provided for attendees to learn diagnostic ultrasound QC in a hands-on environment with live demonstrations of the techniques. Target audience: Medical physicists and other medical professionals in diagnostic imaging and radiation oncology with interest in high-intensity focused ultrasound and in diagnostic ultrasound QC. Learning Objectives: Learn ultrasound physics and safety for HIFU applications through live demonstrations Get an overview of the state-of-the art in HIFU technologies and equipment Gain familiarity with common elements of a quality control program for diagnostic ultrasound imaging Identify QC tools available for testing diagnostic ultrasound systems and learn how to use these tools List of supporting vendors for HIFU and diagnostic ultrasound QC hands-on workshop: Philips Healthcare Alpinion Medical Systems Verasonics, Inc Zonare Medical Systems, Inc Computerized Imaging Reference Systems (CIRS), Inc. GAMMEX, Inc., Cablon Medical BV Steffen Sammet: NIH/NCI grant 5R25CA132822, NIH/NINDS grant 5R25NS

Geoscience Information for Teachers (GIFT) Workshops at the European Geoscience Union General Assembly

Science.gov (United States)

Arnold, Eve; Barnikel, Friedrich; Berenguer, Jean-Luc; Cifelli, Francesca; Funiciello, Francesca; Laj, Carlo; Macko, Stephen; Schwarz, Annegret; Smith, Phil; Summesberger, Herbert

2016-04-01

GIFT workshops are a two-and-a-half-day teacher enhancement workshops organized by the EGU Committee on Education and held in conjunction with the EGU annual General Assembly. The program of each workshop focuses on a different general theme each year. Past themes have included, for example, "Mineral Resources", "Our changing Planet", "Natural Hazards", "Water", "Evolution and Biodiversity" and "Energy and Sustainable Development". These workshops combine scientific presentations on current research in the Earth and Space Sciences, given by prominent scientists attending EGU General Assemblies, with hands-on, inquiry-based activities that can be used by the teachers in their classrooms to explain related scientific principles or topics. Participating teachers are also invited to present their own classroom activities to their colleagues, even when not directly related to the current program. The main objective of these workshops is to communicate first-hand scientific information to teachers in primary and secondary schools, significantly shortening the time between discovery and textbook. The GIFT workshop provides the teachers with materials that can be directly incorporated into their classroom, as well as those of their colleagues at home institutions. In addition, the full immersion of science teachers in a truly scientific context (EGU General Assemblies) and the direct contact with leading geoscientists stimulates curiosity towards research that the teachers can transmit to their pupils. In addition to their scientific content, the GIFT workshops are of high societal value. The value of bringing teachers from many nations together includes the potential for networking and collaborations, the sharing of experiences and an awareness of science education as it is presented in other countries. Since 2003, the EGU GIFT workshops have brought together more than 700 teachers from more than 25 nations. At all previous EGU GIFT workshops teachers mingled with others

Geoscience Information for Teachers (GIFT) Workshops of the European Geoscience Union General Assembly

Science.gov (United States)

Arnold, Eve; Barnikel, Friedrich; Berenguer, Jean-Luc; Cifelli, Francesca; Funiciello, Francesca; King, Chris; Laj, Carlo; Macko, Stephen; Schwarz, Annegret; Smith, Phil; Summesberger, Herbert

2017-04-01

GIFT workshops are a two-and-a-half-day teacher enhancement workshops organized by the EGU Committee on Education and held in conjunction with the EGU annual General Assembly in Vienna, and also elsewhere in the world usually associated with large geoscience conferences. The program of each workshop focuses on a different general theme each year. Past themes have included, for example, "The solar system and beyond", "Mineral Resources", "Our changing Planet", "Natural Hazards", "Water" and "Evolution and Biodiversity". These workshops combine scientific presentations on current research in the Earth and Space Sciences, given by prominent scientists, with hands-on, inquiry-based activities that can be used by the teachers in their classrooms to explain related scientific principles or topics. Participating teachers are also invited to present their own classroom activities to their colleagues, even when not directly related to the current program. The main objective of these workshops is to communicate first-hand scientific information to teachers in primary and secondary schools, significantly shortening the time between discovery and textbook. The GIFT workshop provides the teachers with materials that can be directly incorporated into their classroom, as well as those of their colleagues at home institutions. In addition, the full immersion of science teachers in a truly scientific context (EGU General Assemblies) and the direct contact with leading geoscientists stimulates curiosity towards research that the teachers can transmit to their pupils. In addition to their scientific content, the GIFT workshops are of high societal value. The value of bringing teachers from many nations together includes the potential for networking and collaborations, the sharing of experiences and an awareness of science education as it is presented in other countries. Since 2003, the EGU GIFT workshops have brought together more than 800 teachers from more than 25 nations. At all

Hands-on Precision Agriculture Data Management Workshops for Producers and Industry Professionals: Development and Assessment

Science.gov (United States)

Luck, Joe D.; Fulton, John P.; Rees, Jennifer

2015-01-01

Three Precision Agriculture Data Management workshops regarding yield monitor data were conducted in 2014, reaching 62 participants. Post-workshop surveys (n = 58) indicated 73% of respondents experienced a moderate to significant increase in knowledge related to yield monitor data usage. Another 72% reported that they planned to utilize best…

Workshop on Subcritical Neutron Production

International Nuclear Information System (INIS)

Walter Sadowski; Roald Sagdeev

2006-01-01

Executive Summary of the Workshop on Subcritical Neutron Production A workshop on Subcritical Neutron Production was sponsored by the East-West Center of the University of Maryland on October 11-13, 2004. The subject of the workshop was the application of subcritical neutrons to transmutation of actinides. The workshop was attended by members of the fission, accelerator and fusion communities. Papers on the state of development of neutron production by accelerators, fusion devices, and fission reactors were presented. Discussions were held on the potential of these technologies to solve the problems of spent nuclear waste storage and nuclear non-proliferation presented by current and future nuclear power reactors. A list of participants including their affiliation and their E-Mail addresses is attached. The workshop concluded that the technologies, presently available or under development, hold out the exciting possibility of improving the environmental quality and long term energy resources of nuclear power while strengthening proliferation resistance. The workshop participants agreed on the following statements. The workshop considered a number of technologies to deal with spent nuclear fuels and current actinide inventories. The conclusion was reached that substantial increase in nuclear power production will require that the issue of spent nuclear fuel be resolved. The Workshop concluded that 14 MeV fusion neutrons can be used to destroy nuclear reactor by-products, some of which would otherwise have to be stored for geologic periods of time. The production of 14 MeV neutrons is based on existing fusion technologies at different research institutions in several countries around the world. At the present time this technology is used to produce 14 MeV neutrons in JET. More development work will be required, however, to bring fusion technology to the level where it can be used for actinide burning on an industrial scale. The workshop concluded that the potential

Influence Of Extension Education Workshop On Cabbage Growers ...

African Journals Online (AJOL)

Influence Of Extension Education Workshop On Cabbage Growers Awareness And Knowledge Of Ipm In Aghtapeh Town, Iran. ... A survey was conducted among 60 farmers in Karaj County that included 30 workshop participants, and 30 randomly selected farmers. The study found that workshop participants had ...

The Third ATLAS ROD Workshop

CERN Multimedia

Poggioli, L.

A new-style Workshop After two successful ATLAS ROD Workshops dedicated to the ROD hardware and held at the Geneva University in 1998 and in 2000, a new style Workshop took place at LAPP in Annecy on November 14-15, 2002. This time the Workshop was fully dedicated to the ROD-TDAQ integration and software in view of the near future integration activities of the final RODs for the detector assembly and commissioning. More precisely, the aim of this workshop was to get from the sub-detectors the parameters needed for T-DAQ, as well as status and plans from ROD builders. On the other hand, what was decided and assumed had to be stated (like EB decisions and URDs), and also support plans. The Workshop gathered about 70 participants from all ATLAS sub-detectors and the T-DAQ community. The quite dense agenda allowed nevertheless for many lively discussions, and for a dinner in the old town of Annecy. The Sessions The Workshop was organized in five main sessions: Assumptions and recommendations Sub-de...

1st AAU Workshop on Human-Centered Robotics

DEFF Research Database (Denmark)

The 2012 AAU Workshop on Human-Centered Robotics took place on 15 Nov. 2012, at Aalborg University, Aalborg. The workshop provides a platform for robotics researchers, including professors, PhD and Master students to exchange their ideas and latest results. The objective is to foster closer...... interaction among researchers from multiple relevant disciplines in the human-centered robotics, and consequently, to promote collaborations across departments of all faculties towards making our center a center of excellence in robotics. The workshop becomes a great success, with 13 presentations, attracting...... more than 45 participants from AAU, SDU, DTI and industrial companies as well. The proceedings contain 7 full papers selected out from the full papers submitted afterwards on the basis of workshop abstracts. The papers represent major research development of robotics at AAU, including medical robots...

First International Workshop on Grid Simulator Testing of Wind Turbine Drivetrains: Workshop Proceedings

Energy Technology Data Exchange (ETDEWEB)

Gevorgian, V.; Link, H.; McDade, M.; Mander, A.; Fox, J. C.; Rigas, N.

2013-11-01

This report summarizes the proceedings of the First International Workshop on Grid Simulator Testing of Wind Turbine Drivetrains, held from June 13 to 14, 2013, at the National Renewable Energy Laboratory's National Wind Technology Center, located south of Boulder, Colorado. The workshop was sponsored by the U.S. Department of Energy and cohosted by the National Renewable Energy Laboratory and Clemson University under ongoing collaboration via a cooperative research and development agreement. The purpose of the workshop was to provide a forum to discuss the research, testing needs, and state-of-the-art apparatuses involved in grid compliance testing of utility-scale wind turbine generators. This includes both dynamometer testing of wind turbine drivetrains ('ground testing') and field testing grid-connected wind turbines. Four sessions followed by discussions in which all attendees of the workshop were encouraged to participate comprised the workshop.

Evaluation of radiological workstations and web-browser-based image distribution clients for a PACS project in hands-on workshops

International Nuclear Information System (INIS)

Boehm, Thomas; Handgraetinger, Oliver; Voellmy, Daniel R.; Marincek, Borut; Wildermuth, Simon; Link, Juergen; Ploner, Ricardo

2004-01-01

The methodology and outcome of a hands-on workshop for the evaluation of PACS (picture archiving and communication system) software for a multihospital PACS project are described. The following radiological workstations and web-browser-based image distribution software clients were evaluated as part of a multistep evaluation of PACS vendors in March 2001: Impax DS 3000 V 4.1/Impax Web1000 (Agfa-Gevaert, Mortsel, Belgium); PathSpeed V 8.0/PathSpeed Web (GE Medical Systems, Milwaukee, Wis., USA); ID Report/ID Web (Image Devices, Idstein, Germany); EasyVision DX/EasyWeb (Philips Medical Systems, Eindhoven, Netherlands); and MagicView 1000 VB33a/MagicWeb (Siemens Medical Systems, Erlangen, Germany). A set of anonymized DICOM test data was provided to enable direct image comparison. Radiologists (n=44) evaluated the radiological workstations and nonradiologists (n=53) evaluated the image distribution software clients using different questionnaires. One vendor was not able to import the provided DICOM data set. Another vendor had problems in displaying imported cross-sectional studies in the correct stack order. Three vendors (Agfa-Gevaert, GE, Philips) presented server-client solutions with web access. Two (Siemens, Image Devices) presented stand-alone solutions. The highest scores in the class of radiological workstations were achieved by ID Report from Image Devices (p<0.005). In the class of image distribution clients, the differences were statistically not significant. Questionnaire-based evaluation was shown to be useful for guaranteeing systematic assessment. The workshop was a great success in raising interest in the PACS project in a large group of future clinical users. The methodology used in the present study may be useful for other hospitals evaluating PACS. (orig.)

Workshop on scientific applications of coherent x-rays

Energy Technology Data Exchange (ETDEWEB)

Arthur, J.; Materlik, G.; Winick, H. [Stanford Univ., CA (United States). Stanford Linear Accelerator Center]|[Stanford Univ., CA (United States). Stanford Synchrotron Radiation Lab.; Birgeneau, R.J. [Massachusetts Institute of Technology, Cambridge, MA (United States); Fadley, C.S. [Lawrence Berkeley Lab., CA (United States). Materials Science Division

1994-02-12

This is a report on a workshop held at SLAC on February 12, 1994 to assess the science that would become possible using high peak power, short pulses of coherent radiation from a Free Electron Laser (FEL) operating in the hard x-ray region, at wavelengths down to about 1 {angstrom}. Sixty-three people participated in the workshop. The appendices to this report give a list of participants, the workshop agenda, and the charge to the workshop. Material describing the performance parameters of several possible sources was made available to the participants along with a graph showing the spectral distribution of the spontaneous as well as the coherent radiation and a note on peak power issues. This material is also included as an appendix to this report. This report consists of an Executive Summary, brief summaries by the speaker for each of the talks that were given, and copies of some of the viewgraphs that were shown. Also included are important points raised in the discussions that followed each talk. In addition, two contributions from scientists who could not attend the workshop are included, plus one contribution received from a participant after the workshop. A serious storm on the East coast made it impossible for three speakers and several intended participants to reach Stanford. The talk by Janos Kirz was presented by Malcolm Howells using viewgraphs sent by FAX. The talks by Keith Nelson and Brian Stephenson were not given. We include summaries by them of the talks they would have given, plus copies of some of their viewgraphs, in this report.

Workshop on scientific applications of coherent x-rays

International Nuclear Information System (INIS)

Arthur, J.; Materlik, G.; Winick, H.; Fadley, C.S.

1994-01-01

This is a report on a workshop held at SLAC on February 12, 1994 to assess the science that would become possible using high peak power, short pulses of coherent radiation from a Free Electron Laser (FEL) operating in the hard x-ray region, at wavelengths down to about 1 angstrom. Sixty-three people participated in the workshop. The appendices to this report give a list of participants, the workshop agenda, and the charge to the workshop. Material describing the performance parameters of several possible sources was made available to the participants along with a graph showing the spectral distribution of the spontaneous as well as the coherent radiation and a note on peak power issues. This material is also included as an appendix to this report. This report consists of an Executive Summary, brief summaries by the speaker for each of the talks that were given, and copies of some of the viewgraphs that were shown. Also included are important points raised in the discussions that followed each talk. In addition, two contributions from scientists who could not attend the workshop are included, plus one contribution received from a participant after the workshop. A serious storm on the East coast made it impossible for three speakers and several intended participants to reach Stanford. The talk by Janos Kirz was presented by Malcolm Howells using viewgraphs sent by FAX. The talks by Keith Nelson and Brian Stephenson were not given. We include summaries by them of the talks they would have given, plus copies of some of their viewgraphs, in this report

Faculty Workshops for Teaching Information Assurance through Hands-On Exercises and Case Studies

Science.gov (United States)

Yuan, Xiaohong; Williams, Kenneth; Yu, Huiming; Rorrer, Audrey; Chu, Bei-Tseng; Yang, Li; Winters, Kathy; Kizza, Joseph

2017-01-01

Though many Information Assurance (IA) educators agree that hands-on exercises and case studies improve student learning, hands-on exercises and case studies are not widely adopted due to the time needed to develop them and integrate them into curricula. Under the support of the National Science Foundation (NSF) Scholarship for Service program, we…

Lunar Reconnaissance Orbiter Lunar Workshops for Educators, Year 1 Report

Science.gov (United States)

Jones, A. P.; Hsu, B. C.; Bleacher, L.; Shaner, A. J.; Dalton, H.

2011-12-01

This past summer, the Lunar Reconnaissance Orbiter (LRO) sponsored a series of weeklong professional development workshops designed to educate and inspire grade 6-12 science teachers: the Lunar Workshops for Educators. Participants learned about lunar science and exploration, gained tools to help address common student misconceptions about the Moon, heard some of the latest research results from LRO scientists, worked with LRO data, and learned how to bring these data to their students using hands-on activities aligned with grade 6-12 National Science Education Standards and Benchmarks. Where possible, the workshops also included tours of science facilities or field trips intended to help the teachers better understand mission operations or geologic processes relevant to the Moon. The workshops were very successful. Participants demonstrated an improved understanding of lunar science concepts in post-workshop assessments (as compared to identical pre-assessments) and a greater understanding of how to access and productively share data from LRO with their students and provide them with authentic research experiences. Participant feedback on workshop surveys was also enthusiastically positive. 5 additional Lunar Workshops for Educators will be held around the country in the summer of 2012. For more information and to register, visit http://lunar.gsfc.nasa.gov/lwe/index.html.

Workshop V: Cultural Perception and Bias/Science Practice and Ethics

Science.gov (United States)

Chuan, Kwek Leong; Lin, Jauyn Grace; Pierron-Bohnes, Veronique; Dawson, Silvina Ponce

2015-12-01

Despite the objectivity of science, the local work environment affects the daily activities of scientists. Differences in cultural perception can affect female scientists in the workplace directly. The pressure currently exerted on researchers, on the other hand, is altering how science is practiced and seems to affect women and men differently. In this paper we summarize the discussions that took place on this topic in Workshop V of the 5th IUPAP International Conference on Women in Physics. We present some of the results of the 2010 Global Survey of Physicists analyzed by region and data from France and Taiwan. We also include the recommendations that were formulated at the end of the workshop.

Workshop on nuclear structure and decay data evaluation. Summary report

International Nuclear Information System (INIS)

Pronyaev, V.G.; Nichols, A.L.

2003-01-01

A summary is given of the aims and contents of the Workshop on Nuclear Structure and Decay Data (NSDD) Evaluation, including the agenda, lists of participants and their presentations, general comments and recommendations. The 1-week workshop was organized by the IAEA Nuclear Data Section, and held in Vienna, Austria, from 18 to 22 November 2002. Workshop material, including participants' presentations, computer codes, manuals and other materials for NSDD evaluators, are freely available on CD-ROM on request. (author)

Assessment of exposure to hand-arm vibration and its related health effects in workers employed in stone cutting workshops of Hamadan city

Directory of Open Access Journals (Sweden)

Roya Bayat

2016-06-01

Full Text Available Introduction: The workers employed in stone cutting workplace are exposed to hand-arm vibration and its complications. The aim of this study was to evaluate the exposure to hand-arm vibration and its health effects on workers in the stone cutting workshops. Methods: In this descriptive-analytic study, 40 workers of Hamadan city stone cutting who worked with stone cutting machines were examined. Measuring exposure to hand-arm vibration was performed by standard methods ISO 5349. Symptoms related hand-arm vibration syndrome using a questionnaire construction was studied. Data were analyzed using SPSS software. Results: Results showed that 8-hour equivalent acceleration of hand-arm vibration exposure in stonecuttingworkers was exceeds the permissible exposure levels of country (Pv<0.05. Most average hand and arm vibration acceleration was measured in the Z axis. The average vibration acceleration hand-arm and cutting transverse and longitudinal cutting significant difference was observed (Pv<0.05. Conclusion: In regard to exposure level of stone cutting workers compared with the national exposure limit, the training of health care, non-smoking, and use of anti-vibration gloves, work rotations canthe effective in reducing the risk of health effects. Furthermore, it seems essential to track the health effects associated with human vibration by use of screening tests in the work place seem.

Physics Analysis Tools Workshop 2007

CERN Multimedia

Elizabeth Gallas,

The ATLAS PAT (Physics Analysis Tools) group evaluates, develops and tests software tools for the analysis of physics data, consistent with the ATLAS analysis and event data models. Following on from earlier PAT workshops in London (2004), Tucson (2005) and Tokyo (2006), this year's workshop was hosted by the University of Bergen in Norway on April 23-28 with more than 60 participants. The workshop brought together PAT developers and users to discuss the available tools with an emphasis on preparing for data taking. At the start of the week, workshop participants, laptops and power converters in-hand, jumped headfirst into tutorials, learning how to become trigger-aware and how to use grid computing resources via the distributed analysis tools Panda and Ganga. The well organised tutorials were well attended and soon the network was humming, providing rapid results to the users and ample feedback to the developers. A mid-week break was provided by a relaxing and enjoyable cruise through the majestic Norwegia...

Teacher Workshops in the US: Goals, Best Practices and Impact

Science.gov (United States)

Hörst, S. M.

2011-10-01

The goal of the workshop is to educate the teachers on a few focused topics so that they can transfer the knowledge they gain to their students. We will recruit scientists who are attending the meeting to participate in the workshops and will also pair the teachers with scientists in the field who can serve as a resource for the teacher and their class throughout the school year. The scientists can answer questions the teachers may have, be available to do video lectures or interactive question and answer sessions over skype, and work with the teachers to develop hands-on classroom activities. We will partner closely with EPO professionals in NASA's Science Mission Directorate to ensure that best practices for the workshops are employed, including ensuring that the workshop and workshop materials are designed within the framework of the state standards, surveying participating teachers before the workshops about their needs and goals, assessing the participants pre-workshop knowledge, and engaging participants as learners during the workshop [1]. The impact of the workshop will be increased by providing the teachers and students with a scientist who will serve as a long-term resource. We will maintain contact with the teachers after the workshop to ensure that the scientists are still actively engaged in their classroom and to collect feedback. References [1] Shupla C, et al. (2011) Lessons Learned: Best Practices in Educator Workshops. 42nd Lunar and Planetary Science Conference, no. 2828. EPSC Abstracts Vol. 6, EPSC-DPS2011-1775, 2011 EPSC-DPS Joint Meeting 2011 c Author(s) 2011

Workshop on Accelerator Operation (WAO 2001)

International Nuclear Information System (INIS)

Bailey, R.

2001-01-01

The 3rd Workshop on Accelerator Operation (WAO 2001) followed earlier workshops in 1996 and 1998. Most topics relevant for the efficient and effective operation of accelerators were covered. These included the tools and utilities necessary in the control rooms; the organization of accelerator operation (process monitoring, shift work, stress); the monitoring of beam quality; safety issues and standards; and questions particularly relevant for superconducting accelerators, in particular cryogenics. (author)

77 FR 74829 - Notice of Public Meeting-Cloud Computing and Big Data Forum and Workshop

Science.gov (United States)

2012-12-18

...--Cloud Computing and Big Data Forum and Workshop AGENCY: National Institute of Standards and Technology... Standards and Technology (NIST) announces a Cloud Computing and Big Data Forum and Workshop to be held on... followed by a one-day hands-on workshop. The NIST Cloud Computing and Big Data Forum and Workshop will...

Incorporating a Weight Management Skills Workshop in Pharmacy Curricula in Australia.

Science.gov (United States)

Um, Irene S; Krass, Ines; Armour, Carol; Gill, Timothy; Chaar, Betty B

2016-05-25

Objective. To develop, implement, and evaluate a competency-based weight management skills workshop for undergraduate pharmacy students in an Australian university. Design. A 3-hour workshop titled "Weight Management in Pharmacy" was implemented with a cohort of fourth-year undergraduate pharmacy students (n=180). Learning activities used included case-based learning, hands-on experience, role-play, and group discussion. Assessment. A 22-item attitudinal survey instrument and the validated Obesity Risk Knowledge (ORK-10) scale were administered at baseline and postworkshop to evaluate the impact of this educational workshop. There was significant improvement in the students' ORK scores and students' perceived level of self-confidence in performing weight management skills. Conclusion. An educational workshop designed to enhance professional competencies in weight management ensured graduates were "service-ready" and had the appropriate knowledge, skills, and attributes to deliver patient-centered pharmacy-based weight management services.

Incorporating a Weight Management Skills Workshop in Pharmacy Curricula in Australia

Science.gov (United States)

Krass, Ines; Armour, Carol; Gill, Timothy; Chaar, Betty B.

2016-01-01

Objective. To develop, implement, and evaluate a competency-based weight management skills workshop for undergraduate pharmacy students in an Australian university. Design. A 3-hour workshop titled “Weight Management in Pharmacy” was implemented with a cohort of fourth-year undergraduate pharmacy students (n=180). Learning activities used included case-based learning, hands-on experience, role-play, and group discussion. Assessment. A 22-item attitudinal survey instrument and the validated Obesity Risk Knowledge (ORK-10) scale were administered at baseline and postworkshop to evaluate the impact of this educational workshop. There was significant improvement in the students’ ORK scores and students’ perceived level of self-confidence in performing weight management skills. Conclusion. An educational workshop designed to enhance professional competencies in weight management ensured graduates were “service-ready” and had the appropriate knowledge, skills, and attributes to deliver patient-centered pharmacy-based weight management services. PMID:27293236

Applied antineutrino physics workshop

International Nuclear Information System (INIS)

Lund, James C.

2008-01-01

This workshop is the fourth one of a series that includes the Neutrino Geophysics Conference at Honolulu, Hawaii, which I attended in 2005. This workshop was organized by the Astro-Particle and Cosmology laboratory in the recently opened Condoret building of the University of Paris. More information, including copies of the presentations, on the workshop is available on the website: www.apc.univ-paris7.fr/AAP2007/. The workshop aims at opening neutrino physics to various fields such that it can be applied in geosciences, nuclear industry (reactor and spent fuel monitoring) and non-proliferation. The workshop was attended by over 60 people from Europe, USA, Asia and Brazil. The meeting was also attended by representatives of the Comprehensive nuclear-Test Ban Treaty (CTBT) and the International Atomic Energy Agency (IAEA). The workshop also included a workshop dinner on board of a river boat sailing the Seine river

Proceedings of the advisory committee on reactor safeguards workshop on future reactors

International Nuclear Information System (INIS)

2001-12-01

This report contains the information presented at the Advisory Committee on Reactor Safeguards Workshop on Future Reactors held at the Nuclear Regulatory Commission headquarters in Rockville, Maryland, on June 4-5, 2001. Included are the subject matter summaries, followed by the presentation material and selected participants discussions. The primary purpose of the workshop was to identify the regulatory challenges associated with future reactor designs. A list of such challenges was developed from the workshop notes, the various presentations, the panel discussions and the question and answer sessions. This list is included in the Introduction section of this document. The titles of the papers and the names of the authors have been updated and may differ from those that appeared in the final workshop agenda

Proceedings of the advisory committee on reactor safeguards workshop on future reactors

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-12-01

This report contains the information presented at the Advisory Committee on Reactor Safeguards Workshop on Future Reactors held at the Nuclear Regulatory Commission headquarters in Rockville, Maryland, on June 4-5, 2001. Included are the subject matter summaries, followed by the presentation material and selected participants discussions. The primary purpose of the workshop was to identify the regulatory challenges associated with future reactor designs. A list of such challenges was developed from the workshop notes, the various presentations, the panel discussions and the question and answer sessions. This list is included in the Introduction section of this document. The titles of the papers and the names of the authors have been updated and may differ from those that appeared in the final workshop agenda.

Key Findings from the U.S.-India Partnership for Climate Resilience Workshop on Development and Application of Downscaling Climate Projections

Science.gov (United States)

Kunkel, K.; Dissen, J.; Easterling, D. R.; Kulkarni, A.; Akhtar, F. H.; Hayhoe, K.; Stoner, A. M. K.; Swaminathan, R.; Thrasher, B. L.

2017-12-01

s part of the Department of State U.S.-India Partnership for Climate Resilience (PCR), scientists from NOAA NCEI, CICS-NC, Texas Tech University (TTU), Stanford University (SU), and the Indian Institute of Tropical Meteorology (IITM) held a workshop at IITM in Pune, India during 7-9 March 2017 on the development, techniques and applications of downscaled climate projections. Workshop participants from TTU, SU, and IITM presented state-of-the-art climate downscaling techniques using the ARRM method, NASA NEX climate products, CORDEX-South Asia and analysis tools for resilience planning and sustainable development. PCR collaborators in attendance included Indian practitioners, researchers and other NGO including the WRI Partnership for Resilience and Preparedness (PREP), The Energy and Resources Institute (TERI), and NIH. The scientific techniques were provided to workshop participants in a software package written in R by TTU scientists and several sessions were devoted to hands-on experience with the software package. The workshop further examined case studies on the use of downscaled climate data for decision making in a range of sectors, including human health, agriculture, and water resources management as well as to inform the development of the India State Action Plans. This talk will discuss key outcomes including information needs for downscaling climate projections, importance of QA/QC of the data, key findings from select case studies, and the importance of collaborations and partnerships to apply downscaling projections to help inform the development of the India State Action Plans.

18th International Workshop on Radiation Imaging Detectors

CERN Document Server

2016-01-01

The International Workshops on Radiation Imaging Detectors are held yearly and provide an international forum for discussing current research and developments in the area of position sensitive detectors for radiation imaging, including semiconductor detectors, gas and scintillator-based detectors. Topics include processing and characterization of detector materials, hybridization and interconnect technologies, design of counting or integrating electronics, readout and data acquisition systems, and applications in various scientific and industrial fields. The workshop will have plenary sessions with invited and contributed papers presented orally and in poster sessions. The invited talks will be chosen to review recent advances in different areas covered in the workshop.

Nineteenth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Horne, R.J.; Kruger, P.; Miller, F.G.; Brigham, W.E.; Cook, J.W. (Stanford Geothermal Program)

1994-01-20

PREFACE The Nineteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 18-20, 1994. This workshop opened on a sad note because of the death of Prof. Henry J. Ramey, Jr. on November 19, 1993. Hank had been fighting leukemia for a long time and finally lost the battle. Many of the workshop participants were present for the celebration of his life on January 21 at Stanford's Memorial Church. Hank was one of the founders of the Stanford Geothermal Program and the Geothermal Reservoir Engineering Workshop. His energy, kindness, quick wit, and knowledge will long be missed at future workshops. Following the Preface we have included a copy of the Memorial Resolution passed by the Stanford University Senate. There were one hundred and four registered participants. Participants were from ten foreign countries: Costa Rica, England, Iceland, Italy, Japan, Kenya, Mexico, New Zealand, Philippines and Turkey. Workshop papers described the performance of fourteen geothermal fields outside the United States. Roland N. Home opened the meeting and welcomed the visitors to the campus. The key note speaker was J.E. ''Ted'' Mock who gave a presentation about the future of geothermal development. The banquet speaker was Jesus Rivera and he spoke about Energy Sources of Central American Countries. Forty two papers were presented at the Workshop. Technical papers were organized in twelve sessions concerning: sciences, injection, production, modeling, and adsorption. Session chairmen are an important part of the workshop and our thanks go to: John Counsil, Mark Walters, Dave Duchane, David Faulder, Gudmundur Bodvarsson, Jim Lovekin, Joel Renner, and Iraj Ershaghi. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Ted Sumida, and Terri A. Ramey who also produces the Proceedings Volumes for publication. We owe a great deal of thanks to our students who

XXXIV Bialowieza Workshop on Geometric Methods in Physics

CERN Document Server

Ali, S; Bieliavsky, Pierre; Odzijewicz, Anatol; Schlichenmaier, Martin; Voronov, Theodore

2016-01-01

This book features a selection of articles based on the XXXIV Białowieża Workshop on Geometric Methods in Physics, 2015. The articles presented are mathematically rigorous, include important physical implications and address the application of geometry in classical and quantum physics. Special attention deserves the session devoted to discussions of Gerard Emch's most important and lasting achievements in mathematical physics. The Białowieża workshops are among the most important meetings in the field and gather participants from mathematics and physics alike. Despite their long tradition, the Workshops remain at the cutting edge of ongoing research. For the past several years, the Białowieża Workshop has been followed by a School on Geometry and Physics, where advanced lectures for graduate students and young researchers are presented. The unique atmosphere of the Workshop and School is enhanced by the venue, framed by the natural beauty of the Białowieża forest in eastern Poland.

4th Penn State Bioinorganic Workshop

Energy Technology Data Exchange (ETDEWEB)

Krebs, Carsten [Pennsylvania State Univ., University Park, PA (United States)

2017-08-22

Pennsylvania State University and our unique laboratory space are well suited for the continuation of such training workshops. The co-principal investigators of this award lead these efforts. After a smaller “trial workshop” in 2010, the Penn State bioinorganic group, led by the co-PIs, offers these workshops biennially. The 2012, 2014, and 2016 workshops provided training to 123, 162, and 153 participants, respectively, by offering (i) a series of lectures given by faculty experts on the given topic, (ii) hands-on training in small groups by experts in the various methods, and (iii) sharing research results of the participants by oral and poster presentations. The centerpiece of the workshops is the hands-on training, in which approximately half of the participants from all ranks (undergraduate students to faculty) served as teachers. In this section, the traditional roles of teachers and students were sometimes reversed to the extent that undergraduate students taught faculty in the students' areas of specialty. We anticipate that these workshops will facilitate research in bioinorganic chemistry and will help establish future collaborations among “workshop alumni” to carry out cutting-edge research in bioinorganic chemistry that will address many important topics relevant to our society.

Workshop on crystals and focusing

Science.gov (United States)

Berreman, D. W.

1980-12-01

The purpose of the workshop on crystals and focusing was to exchange and pool the experience and information that the participants could contribute on the design and construction of monochromators for EXAFS with optimum speed, resolution and versatility. The panel was chaired by D.W. Berreman of BTL and included G. G. Cohen of NBS, S. Heald of Brookhaven National Labs and Lu Kun-quan of U. of Washington. Written contributions for the workshop were made by R. J. Emrich and J. R. Katzer of U. of Delaware, R. C. Gamble of Cal. Tech., J. Crane of Cal. Tech., and T. Matsushita of S. S. R. L. G. Bunker of U. of Washington was recording secretary, G. G. Cohen and S. Heald gave invited papers on the main program that were relevant to the workshop. Other contributors were R. Hänsel of U. of Kiel, W. Germany, G. Christoff of Ohio State and D. Hempstead of Rigaku/USA Inc., J. Holben of Marconi Avionics, Hertfordshire, England and J. Hastings of Brookhaven N. L.

[Development and assessment of a workshop on repair of third and fourth degree obstetric tears].

Science.gov (United States)

Emmanuelli, V; Lucot, J-P; Closset, E; Cosson, M; Deruelle, P

2013-04-01

To evaluate the educational interest of a workshop on diagnosis and repair of obstetric anal sphincter injuries (OASIS). To evaluate the theoretical and anatomical knowledge of OASIS repair by French residents in obstetrics and gynecology. The workshop was composed of slides, video of repair and training using cadaveric sow's anal sphincters. All subjects were tested with a questionnaire before and after the course. Thirty residents participated. Classification of OASIS was known by 13.3% of the residents before the training versus 93.3% after the workshop (PIAS) versus 3% at post-test (PIAS and only one third knew the technical repair of the EAS. After the workshop, the theoretical knowledge of EAS and IAS repair were acquired by all (P<0.001). Structured hands-on training improves significantly the knowledge of OASIS diagnosis and repair. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Ninth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Gudmundsson, J.S. (Stanford Geothermal Program)

1983-12-15

The attendance at the Workshop was similar to last year's with 123 registered participants of which 22 represented 8 foreign countries. A record number of technical papers (about 60) were submitted for presentation at the Workshop. The Program Committee, therefore, decided to have several parallel sessions to accommodate most of the papers. This format proved unpopular and will not be repeated. Many of the participants felt that the Workshop lost some of its unique qualities by having parallel sessions. The Workshop has always been held near the middle of December during examination week at Stanford. This timing was reviewed in an open discussion at the Workshop. The Program Committee subsequently decided to move the Workshop to January. The Tenth Workshop will be held on January 22-24, 1985. The theme of the Workshop this year was ''field developments worldwide''. The Program Committee addressed this theme by encouraging participants to submit field development papers, and by inviting several international authorities to give presentations at the Workshop. Field developments in at least twelve countries were reported: China, El Salvador, France, Greece, Iceland, Italy, Japan, Kenya, Mexico, New Zealand, the Philippines, and the United States. There were 58 technical presentations at the Workshop, of which 4 were not made available for publication. Several authors submitted papers not presented at the Workshop. However, these are included in the 60 papers of these Proceedings. The introductory address was given by Ron Toms of the U.S. Department of Energy, and the banquet speaker was A1 Cooper of Chevron Resources Company. An important contribution was made to the Workshop by the chairmen of the technical sessions. Other than Stanford Geothermal Program faculty members, they included: Don White (Field Developments), Bill D'Olier (Hydrothermal Systems), Herman Dykstra (Well Testing), Karsten Pruess (Well Testing), John Counsil

Third workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P. (eds.)

1977-12-15

The Third Workshop on Geothermal Reservoir Engineering convened at Stanford University on December 14, 1977, with 104 attendees from six nations. In keeping with the recommendations expressed by the participants at the Second Workshop, the format of the Workshop was retained, with three days of technical sessions devoted to reservoir physics, well and reservoir testing, field development, and mathematical modeling of geothermal reservoirs. The program presented 33 technical papers, summaries of which are included in these Proceedings. Although the format of the Workshop has remained constant, it is clear from a perusal of the Table of Contents that considerable advances have occurred in all phases of geothermal reservoir engineering over the past three years. Greater understanding of reservoir physics and mathematical representations of vapor-dominated and liquid-dominated reservoirs are evident; new techniques for their analysis are being developed, and significant field data from a number of newer reservoirs are analyzed. The objectives of these workshops have been to bring together researchers active in the various physical and mathematical disciplines comprising the field of geothermal reservoir engineering, to give the participants a forum for review of progress and exchange of new ideas in this rapidly developing field, and to summarize the effective state of the art of geothermal reservoir engineering in a form readily useful to the many government and private agencies involved in the development of geothermal energy. To these objectives, the Third Workshop and these Proceedings have been successfully directed. Several important events in this field have occurred since the Second Workshop in December 1976. The first among these was the incorporation of the Energy Research and Development Administration (ERDA) into the newly formed Department of Energy (DOE) which continues as the leading Federal agency in geothermal reservoir engineering research. The Third

Workshop on neutron capture therapy

Energy Technology Data Exchange (ETDEWEB)

Fairchild, R.G.; Bond, V.P. (eds.)

1986-01-01

Potentially optimal conditions for Neutron Capture Therapy (NCT) may soon be in hand due to the anticipated development of band-pass filtered beams relatively free of fast neutron contaminations, and of broadly applicable biomolecules for boron transport such as porphyrins and monoclonal antibodies. Consequently, a number of groups in the US are now devoting their efforts to exploring NCT for clinical application. The purpose of this Workshop was to bring these groups together to exchange views on significant problems of mutual interest, and to assure a unified and effective approach to the solutions. Several areas of preclinical investigation were deemed to be necessary before it would be possible to initiate clinical studies. As neither the monomer nor the dimer of sulfhydryl boron hydride is unequivocally preferable at this time, studies on both compounds should be continued until one is proven superior.

Workshop on neutron capture therapy

International Nuclear Information System (INIS)

Fairchild, R.G.; Bond, V.P.

1986-01-01

Potentially optimal conditions for Neutron Capture Therapy (NCT) may soon be in hand due to the anticipated development of band-pass filtered beams relatively free of fast neutron contaminations, and of broadly applicable biomolecules for boron transport such as porphyrins and monoclonal antibodies. Consequently, a number of groups in the US are now devoting their efforts to exploring NCT for clinical application. The purpose of this Workshop was to bring these groups together to exchange views on significant problems of mutual interest, and to assure a unified and effective approach to the solutions. Several areas of preclinical investigation were deemed to be necessary before it would be possible to initiate clinical studies. As neither the monomer nor the dimer of sulfhydryl boron hydride is unequivocally preferable at this time, studies on both compounds should be continued until one is proven superior

USACM Thematic Workshop On Uncertainty Quantification And Data-Driven Modeling.

Energy Technology Data Exchange (ETDEWEB)

Stewart, James R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-05-01

The USACM Thematic Workshop on Uncertainty Quantification and Data-Driven Modeling was held on March 23-24, 2017, in Austin, TX. The organizers of the technical program were James R. Stewart of Sandia National Laboratories and Krishna Garikipati of University of Michigan. The administrative organizer was Ruth Hengst, who serves as Program Coordinator for the USACM. The organization of this workshop was coordinated through the USACM Technical Thrust Area on Uncertainty Quantification and Probabilistic Analysis. The workshop website (http://uqpm2017.usacm.org) includes the presentation agenda as well as links to several of the presentation slides (permission to access the presentations was granted by each of those speakers, respectively). Herein, this final report contains the complete workshop program that includes the presentation agenda, the presentation abstracts, and the list of posters.

Report on the Aseismic Slip, Tremor, and Earthquakes Workshop

Science.gov (United States)

Gomberg, Joan; Roeloffs, Evelyn; Trehu, Anne; Dragert, Herb; Meertens, Charles

2008-01-01

This report summarizes the discussions and information presented during the workshop on Aseismic Slip, Tremor, and Earthquakes. Workshop goals included improving coordination among those involved in conducting research related to these phenomena, assessing the implications for earthquake hazard assessment, and identifying ways to capitalize on the education and outreach opportunities presented by these phenomena. Research activities of focus included making, disseminating, and analyzing relevant measurements; the relationships among tremor, aseismic or 'slow-slip', and earthquakes; and discovering the underlying causative physical processes. More than 52 participants contributed to the workshop, held February 25-28, 2008 in Sidney, British Columbia. The workshop was sponsored by the U.S. Geological Survey, the National Science Foundation?s Earthscope Program and UNAVCO Consortium, and the Geological Survey of Canada. This report has five parts. In the first part, we integrate the information exchanged at the workshop as it relates to advancing our understanding of earthquake generation and hazard. In the second part, we summarize the ideas and concerns discussed in workshop working groups on Opportunities for Education and Outreach, Data and Instrumentation, User and Public Needs, and Research Coordination. The third part presents summaries of the oral presentations. The oral presentations are grouped as they were at the workshop in the categories of phenomenology, underlying physical processes, and implications for earthquake hazards. The fourth part contains the meeting program and the fifth part lists the workshop participants. References noted in parentheses refer to the authors of presentations made at the workshop, and published references are noted in square brackets and listed in the Reference section. Appendix A contains abstracts of all participant presentations and posters, which also have been posted online, along with presentations and author contact

Second Workshop on Mechatronic Systems

CERN Document Server

Choley, Jean-Yves; Chaari, Fakher; Jarraya, Abdessalem; Haddar, Mohamed

2014-01-01

The book offers a snapshot of the state-of-art in the field of model-based mechatronic system design. It covers topics including machine design and optimization, predictive systems in manufacturing networks, and the development of software for modeling and simulation of processes, which are supplemented by practical case studies. The book is a collection of fifteen selected contributions presented during the Workshop on Mechatronic Systems, held on March 17-19, 2014, in Mahdia, Tunisia. The workshop was jointly organized by the Laboratory of Mechanics Modeling and Production (LA2MP) of the National School of Engineers Sfax, Tunisia, and the Laboratory for Mechanical Systems and Materials Engineering (LISMMA) of Higher Institute of Mechanics (SUPMECA), Paris, France.

Workshop on PSA for New and Advanced Reactors

International Nuclear Information System (INIS)

2012-01-01

This workshop was organized by the NEA Working Group on Risk Assessment (WGRISK). The key objective of the workshop was to share the current state-of-the art on the PSA (Probabilistic Safety Assessment) applied for new reactors and advanced reactors. Fifty experts from 13 countries and one international organization (IAEA) participated in the present workshop, and 35 technical papers were presented. The main topics of interest, discussed during the workshop, included the followings: regulatory aspects, risk-informed methods, technical aspects of the PSA for new and advanced reactors, hazards of PSA (internal and external), severe accident/source term/Level 2 PSA, and consequence analysis/Level 3 PSA. Among the technical aspects of the PSA, the assessment of the reliability of passive safety systems appears to be a recurrent issue

SketchingDIS: Hand-drawn Sketching in HCI

DEFF Research Database (Denmark)

Lewis, Makayla; Sturdee, Miriam; Alexander, Jason

2017-01-01

DIS: Hand-drawn sketching in HCI' SketchingDIS.wordpress.com, a one-day workshop will bring together researchers from various disciplines that have incorporated hand-drawn sketching into their everyday research practice, to share knowledge and methodologies, generate ideas, practice collaborative sketching...

Workshop on radioisotope safety issues in medical and academic institutions

International Nuclear Information System (INIS)

1995-03-01

The purpose of this workshop was to present current trends and recent initiatives of AECB staff members on issues relating to the regulation of radiation safety at hospitals and universities, and to invite the views of licencees on these matters. This report provides a record of presentations and discussions at this workshop. Presentation overheads are included as well as the results of workshop evaluations and a list of participants

Workshop on radioisotope safety issues in medical and academic institutions

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

The purpose of this workshop was to present current trends and recent initiatives of AECB staff members on issues relating to the regulation of radiation safety at hospitals and universities, and to invite the views of licencees on these matters. This report provides a record of presentations and discussions at this workshop. Presentation overheads are included as well as the results of workshop evaluations and a list of participants.

The U.S./IAEA Workshop on Software Sustainability for Safeguards Instrumentation

Energy Technology Data Exchange (ETDEWEB)

Pepper S. E.; .; Worrall, L.; Pickett, C.; Bachner, K.; Queirolo, A.

2014-08-08

The U.S. National Nuclear Security Administration’s Next Generation Safeguards Initiative, the U.S. Department of State, and the International Atomic Energy Agency (IAEA) organized a a workshop on the subject of ”Software Sustainability for Safeguards Instrumentation.” The workshop was held at the Vienna International Centre in Vienna, Austria, May 6-8, 2014. The workshop participants included software and hardware experts from national laboratories, industry, government, and IAEA member states who were specially selected by the workshop organizers based on their experience with software that is developed for the control and operation of safeguards instrumentation. The workshop included presentations, to orient the participants to the IAEA Department of Safeguards software activities related to instrumentation data collection and processing, and case studies that were designed to inspire discussion of software development, use, maintenance, and upgrades in breakout sessions and to result in recommendations for effective software practices and management. This report summarizes the results of the workshop.

International workshop on cold neutron sources

Energy Technology Data Exchange (ETDEWEB)

Russell, G.J.; West, C.D. (comps.) (Los Alamos National Lab., NM (United States))

1991-08-01

The first meeting devoted to cold neutron sources was held at the Los Alamos National Laboratory on March 5--8, 1990. Cosponsored by Los Alamos and Oak Ridge National Laboratories, the meeting was organized as an International Workshop on Cold Neutron Sources and brought together experts in the field of cold-neutron-source design for reactors and spallation sources. Eighty-four people from seven countries attended. Because the meeting was the first of its kind in over forty years, much time was spent acquainting participants with past and planned activities at reactor and spallation facilities worldwide. As a result, the meeting had more of a conference flavor than one of a workshop. The general topics covered at the workshop included: Criteria for cold source design; neutronic predictions and performance; energy deposition and removal; engineering design, fabrication, and operation; material properties; radiation damage; instrumentation; safety; existing cold sources; and future cold sources.

International workshop on cold neutron sources

International Nuclear Information System (INIS)

Russell, G.J.; West, C.D.

1991-08-01

The first meeting devoted to cold neutron sources was held at the Los Alamos National Laboratory on March 5--8, 1990. Cosponsored by Los Alamos and Oak Ridge National Laboratories, the meeting was organized as an International Workshop on Cold Neutron Sources and brought together experts in the field of cold-neutron-source design for reactors and spallation sources. Eighty-four people from seven countries attended. Because the meeting was the first of its kind in over forty years, much time was spent acquainting participants with past and planned activities at reactor and spallation facilities worldwide. As a result, the meeting had more of a conference flavor than one of a workshop. The general topics covered at the workshop included: Criteria for cold source design; neutronic predictions and performance; energy deposition and removal; engineering design, fabrication, and operation; material properties; radiation damage; instrumentation; safety; existing cold sources; and future cold sources

Turin workshop on radiocarbon dating the Turin Shroud

International Nuclear Information System (INIS)

Gove, H.E.

1987-01-01

A workshop to explore the procedures for making carbon-14 measurements on the cloth of the Shroud of Turin was held in Turin, Italy on September 29, 30 and October 1, 1986. It was sponsored by the Pontifical Academy of Sciences whose president chaired the workshop and by the Archbishop of Turin. Twenty-two people participated including representatives from seven laboratories who have indicated a willingness to carry out the measurements if a request to do so from the Vatican is forthcoming. A protocol for carrying out this task was agreed upon by the workshop delegates and has been presented to Vatican authorities. (orig.)

International Workshop on Evidence-Based Technology Enhanced Learning

CERN Document Server

Gennari, Rosella; Marenzi, Ivana; Prieta, Fernando; Rodríguez, Juan

2012-01-01

Research on Technology Enhanced Learning (TEL) investigates how information and communication technologies can be designed in order to support pedagogical activities. The workshop proceedings collects contributions concerning evidence based TEL systems, like their design following EBD principles as well as studies or best practices that educators, education stakeholders or psychologists used to diagnose or improve their students' learning skills, including students with specific difficulties. The international ebTEL’12 workshop wants to be a forum in which TEL researchers and practitioners alike can discuss ideas, projects, and lessons related to ebTEL. The workshop takes place in Salamanca, Spain, on March 28th-30th 2012.  

Eleventh workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Counsil, J.R. (Stanford Geothermal Program)

1986-01-23

The Eleventh Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 21-23, 1986. The attendance was up compared to previous years, with 144 registered participants. Ten foreign countries were represented: Canada, England, France, Iceland, Indonesia, Italy, Japan, Mexico, New Zealand and Turkey. There were 38 technical presentations at the Workshop which are published as papers in this Proceedings volume. Six technical papers not presented at the Workshop are also published and one presentation is not published. In addition to these 45 technical presentations or papers, the introductory address was given by J. E. Mock from the Department of Energy. The Workshop Banquet speaker was Jim Combs of Geothermal Resources International, Inc. We thank him for his presentation on GEO geothermal developments at The Geysers. The chairmen of the technical sessions made an important contribution to the Workshop. Other than Stanford faculty members they included: M. Gulati, E. Iglesias, A. Moench, S. Prestwich, and K. Pruess. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and students. We would like to thank J.W. Cook, J.R. Hartford, M.C. King, A.E. Osugi, P. Pettit, J. Arroyo, J. Thorne, and T.A. Ramey for their valued help with the meeting arrangements and preparing the Proceedings. We also owe great thanks to our students who arranged and operated the audio-visual equipment. The Eleventh Workshop was supported by the Geothermal Technology Division of the U.S. Department of Energy through Contract DE-AS03-80SF11459. We deeply appreciate this continued support. January 1986 H.J. Ramey, Jr. P. Kruger R.N. Horne W.E. Brigham F.G. Miller J.R. Counsil

Fourth Latin-American workshop on plasma physics. Contributed papers

International Nuclear Information System (INIS)

1990-01-01

The main goal of this series of Workshops is to provide a periodic meeting place for Latin-American researchers in plasma physics together with colleagues from other countries around the world. This volume includes the contributed papers presented at the Workshop on Plasma Physics held in Buenos Aires in 1990. The scope of the Workshop can be synthesized in the following main subjects: Tokamak experiments and theory; alternative confinement systems and basic experiments; technology and applications; general theory; astrophysical and space plasmas

77 FR 31371 - Public Workshop: Privacy Compliance Workshop

Science.gov (United States)

2012-05-25

... presentations, including the privacy compliance fundamentals, privacy and data security, and the privacy... DEPARTMENT OF HOMELAND SECURITY Office of the Secretary Public Workshop: Privacy Compliance... Homeland Security Privacy Office will host a public workshop, ``Privacy Compliance Workshop.'' DATES: The...

Proceedings of the second data acquisition system workshop

International Nuclear Information System (INIS)

Ohska, T.K.

1988-02-01

The second data acquisition system workshop was held on July 18 and 19, 1986 at the National Laboratory for High Energy Physics (KEK). The organizers had one thing in mind when this workshop was planned. It was wanted to make a record of mistakes in designing and building the electronic system. The time when this workshop was held was just before the completion of the TRISTAN detectors when everyone was very busy. Brilliant achievements have been published every year in the world, but the hard earned experience on what should not be done does not appear on publication. To record it while it is still hot was the basic motivation of this workshop. More than 100 people attended the workshop, and some speakers did excellently what the organizers hoped to do, but some talked on their great achievements only. The organizers are very thankful to everybody who helped before, during and after the workshop. If possible, it should be asked all speakers to hand in their write-ups on the day of the workshop. Actually, the last write-up was received almost one year late, and the publication of this report delayed. In this book, those write-ups are collected. (Kako, I.)

Student Feedback of Career Development Workshops for Program Improvement

Science.gov (United States)

LeBeau, J. E.; Pressley, S. N.

2016-12-01

A number of techniques are employed each year to evaluate the effectiveness of and to identify opportunities for improvement in the Laboratory for Atmospheric Research (LAR) REU program at Washington State University. For example, information gathered from pre-/post-surveys and pre-/post-interviews provides information regarding students' perceptions and levels of experience with the scientific process, career and academic goals, and motivation for joining the REU program. Poster session rubrics assess students' abilities to summarize their experiences in a professional setting. Alumni surveys gauge former participants' perceptions of the REU experience. One seemingly simple and highly useful, but often less documented, component of the evaluation process for program improvement is the use of workshop feedback forms. Weekly workshops are designed to provide students with enhanced knowledge and skills in the area of atmospheric chemistry as well as research design skills, academic and career guidance, and presentation skills. According to previous years' evaluation reports, workshops are largely beneficial to students for learning new skills. Yet, students suggest a number of recommendations that may benefit any REU program, such as: providing slides beforehand to provide a framework for the upcoming workshop, having instructors speak in more student-friendly language, covering higher-level topics, and including more hands-on, instructor-guided practice during the workshops. Thus, workshop feedback forms provide meaningful feedback to increase learning outcomes and enhance the REU student experience. This presentation will offer ideas gathered from over five years of workshop feedback forms that, while somewhat specific to workshops offered for the LAR REU, can offer faculty and PIs insight into the student experience, enhancing their ability to improve programming and achieve greater learning outcomes.

Thirteenth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Brigham, W.E.; Miller, F.G.; Cook, J.W. (Stanford Geothermal Program)

1988-01-21

PREFACE The Thirteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 19-21, 1988. Although 1987 continued to be difficult for the domestic geothermal industry, world-wide activities continued to expand. Two invited presentations on mature geothermal systems were a keynote of the meeting. Malcolm Grant presented a detailed review of Wairakei, New Zealand and highlighted plans for new development. G. Neri summarized experience on flow rate decline and well test analysis in Larderello, Italy. Attendance continued to be high with 128 registered participants. Eight foreign countries were represented: England, France, Iceland, Italy, New Zealand, Japan, Mexico and The Philippines. A discussion of future workshops produced a strong recommendation that the Stanford Workshop program continue for the future. There were forty-one technical presentations at the Workshop. All of these are published as papers in this Proceedings volume. Four technical papers not presented at the Workshop are also published. In addition to these forty five technical presentations or papers, the introductory address was given by Henry J. Ramey, Jr. from the Stanford Geothermal Program. The Workshop Banquet speaker was Gustavo Calderon from the Inter-American Development Bank. We thank him for sharing with the Workshop participants a description of the Bank???s operations in Costa Rica developing alternative energy resources, specifically Geothermal, to improve the country???s economic basis. His talk appears as a paper in the back of this volume. The chairmen of the technical sessions made an important contribution to the workshop. Other than Stanford faculty members they included: J. Combs, G. T. Cole, J. Counsil, A. Drenick, H. Dykstra, K. Goyal, P. Muffler, K. Pruess, and S. K. Sanyal. The Workshop was organized by the Stanford Geothermal Program faculty, staff and students. We would like to thank Marilyn King, Pat Oto, Terri Ramey, Bronwyn Jones

Role and importance of workshops in the development of heritage protection

Directory of Open Access Journals (Sweden)

Živa Deu

2013-07-01

Full Text Available This contribution presents a detailed account of the role and importance of urbanist-architecture and architecture workshops. The analysis of the chosen sample of twenty-five workshops tied to the developmental protection of the heritage of built structures and the preservation of immobile cultural heritage as a whole illuminates the pedagogic importance and examines the transmission of workshop products into practice. It has been established that in addition to raising new architects the workshops posses a wider educational importance. Apart from the client the workshop process includes the local inhabitants who, through the process, familiarize themselves with less well known expert and practical knowledge. Without it any expectation of a quality settlement of vital building heritage would not be merited. An overview of the results stemming from the workshops demonstrates that practical applications do not achieve desired results. Many products remained locked in the clients’ desk drawers with less than half ever put into practice. All the workshops, including the ones not, or not yet realised in their intended form, produced material of lasting value, specifically in the work of the regional Institutes for the Protection of Cultural Heritage. The materials handed over to institutes playing an important role in the productive efforts of the high grade of protection and development of heritage include multi-layered analyses of valuable built structures and architectural recordings. From the point of view of developmental protection of Slovenian cultural heritage and due to the demonstrated use of important analytic material and especially due to their proven educational value the exercise of workshops in various settlements of Slovenian space is indispensable.

The Second International Workshop on Bioprinting, Biopatterning and Bioassembly.

Science.gov (United States)

Mironov, Vladimir

2005-08-01

The Second International Workshop on Bioprinting, Biopatterning and Bioassembly was held at the Medical University of South Carolina (MUSC), located in the beautiful, historic city of Charleston. The workshop attracted > 50 participants from 10 different countries, including mechanical and chemical engineers, molecular, cell and developmental biologists, biophysicists, mathematicians, clinicians, humanists and artists. Bioprinting can be defined as computer-aided, automatic, layer-by-layer deposition, transfer and patterning of biologically relevant materials. The workshop goal was to gather the world's experts and leaders, present the latest results, assess future trends, explore new applications, and promote international collaborations and academic-industrial partnerships. The workshop demonstrated the multidisciplinary and global character of ongoing efforts in the development of bioprinting technology, galvanised an evolving community of bioprintists, and demonstrated feasibility as well as strong potential for a broad spectrum of applications of bioprinting technology. The Third International Workshop on Bioprinting, Biopatterning and Bioassembly is planned for Japan in 2006.

USSP-IAEA WORKSHOP ON ADVANCED SENSORS FOR SAFEGUARDS

International Nuclear Information System (INIS)

PEPPER, S.; QUEIROLO, A.; ZENDEL, M.; WHICHELLO, J.; ANNESE, C.; GRIEBE, J.; GRIEBE, R.

2007-01-01

The IAEA Medium Term Strategy (2006-2011) defines a number of specific goals in respect to the IAEA's ability to provide assurances to the international community regarding the peaceful use of nuclear energy through States adherences to their respective non-proliferation treaty commitments. The IAEA has long used and still needs the best possible sensors to detect and measure nuclear material. The Department of Safeguards, recognizing the importance of safeguards-oriented R and D, especially targeting improved detection capabilities for undeclared facilities, materials and activities, initiated a number of activities in early 2005. The initiatives included letters to Member State Support Programs (MSSPs), personal contacts with known technology holders, topical meetings, consultant reviews of safeguards technology, and special workshops to identify new and novel technologies and methodologies. In support of this objective, the United States Support Program to IAEA Safeguards hosted a workshop on ''Advanced Sensors for Safeguards'' in Santa Fe, New Mexico, from April 23-27, 2007. The Organizational Analysis Corporation, a U.S.-based management consulting firm, organized and facilitated the workshop. The workshop's goal was to help the IAEA identify and plan for new sensors for safeguards implementation. The workshop, which was attended by representatives of seven member states and international organizations, included presentations by technology holders and developers on new technologies thought to have relevance to international safeguards, but not yet in use by the IAEA. The presentations were followed by facilitated breakout sessions where the participants considered two scenarios typical of what IAEA inspectors might face in the field. One scenario focused on an enrichment plant; the other scenario focused on a research reactor. The participants brainstormed using the technologies presented by the participants and other technologies known to them to propose

Proceedings of the sixth international workshop on ceramic breeder blanket interactions

International Nuclear Information System (INIS)

Noda, Kenji

1998-03-01

This report is the Proceedings of ''the Sixth International Workshop on Ceramic Breeder Blanket Interactions'' which was held as a workshop on ceramic breeders under Annex II of IEA Implementing Agreement on a Programme of Research and Development on Fusion Materials, and Japan-US Workshop 97FT4-01. This workshop was held in Mito city, Japan on October 22-24, 1997. About forty experts from EU, Japan, USA, and Chile attended the workshop. The scope of the workshop included the following: 1) fabrication and characterization of ceramic breeders, 2) properties data for ceramic breeders, 3) tritium release characteristics, 4) modeling of tritium behavior, 5) irradiation effects on performance behavior, 6) blanket design and R and D requirements, 7) hydrogen behavior in materials, and 8) blanket system technology and structural materials. In the workshop, information exchange was performed for fabrication technology of ceramic breeder pebbles in EU and Japan, data of various properties of Li 2 TiO 3 , tritium release behavior of Li 2 TiO 3 and Li 2 ZrO 3 including tritium diffusion, modeling of tritium release from Li 2 ZrO 3 in ITER condition, helium release behavior from Li 2 O, results of tritium release irradiation tests of Li 4 SiO 4 pebbles in EXOTIC-7, R and D issues for ceramic breeders for ITER and DEMO blankets, etc. The 23 of the papers are indexed individually. (J.P.N.)

Developing workshop module of realistic mathematics education: Follow-up workshop

Science.gov (United States)

Palupi, E. L. W.; Khabibah, S.

2018-01-01

Realistic Mathematics Education (RME) is a learning approach which fits the aim of the curriculum. The success of RME in teaching mathematics concepts, triggering students’ interest in mathematics and teaching high order thinking skills to the students will make teachers start to learn RME. Hence, RME workshop is often offered and done. This study applied development model proposed by Plomp. Based on the study by RME team, there are three kinds of RME workshop: start-up workshop, follow-up workshop, and quality boost. However, there is no standardized or validated module which is used in that workshops. This study aims to develop a module of RME follow-up workshop which is valid and can be used. Plopm’s developmental model includes materials analysis, design, realization, implementation, and evaluation. Based on the validation, the developed module is valid. While field test shows that the module can be used effectively.

Probabilistic Safety Assessment (PSA) of Natural External Hazards Including Earthquakes. Workshop Proceedings, Prague, Czech Republic, 17-20 June 2013

International Nuclear Information System (INIS)

2014-01-01

The Fukushima Dai-ichi accident triggered discussions about the significance of external hazards and their treatment in safety analyses. In addition, stress tests results have shown vulnerabilities and potential of cliff-edge effects in plant responses to external hazards and have identified possibilities and priorities for improvements and safety measures' implementation at specific sites and designs. In order to address these issues and provide relevant conclusions and recommendations to CSNI and CNRA, the CSNI Working Group on Risk Assessment (WGRISK) directed, in cooperation with the CSNI Working Group on Integrity and Ageing of Components and Structures (WGIAGE), a workshop hosted by UJV Rez. The key objectives of the workshop were to collect information from the OECD member states on methods and approaches being used, and experience gained in probabilistic safety assessment of natural external hazards, as well as to support the fulfillment of the CSNI task on 'PSA of natural external hazards including earthquakes'. These objectives are described more in detail in the introduction in Chapter 1 of this report. The WGRISK activities preceding the workshop and leading to the decision to organize it are described in Chapter 2 of this report. The focus of the workshop was on external events PSA for nuclear power plants, including all modes of operation. The workshop scope was generally limited to external, natural hazards, including those hazards where the distinction between natural and man-made hazards is not sharp. The detailed information about the presentations, discussions, and results of the workshop is presented in Chapter 3 of this report. Some general conclusions were agreed on during the workshop, which are presented in the following paragraphs. - The lessons learned from the Fukushima Dai-ichi reactor accidents and related actions at the national, regional, and global level have emphasized the importance to assess risks associated (authors) with

EPA Workshop on Epigenetics and Cumulative Risk ...

Science.gov (United States)

Agenda Download the Workshop Agenda (PDF) The workshop included presentations and discussions by scientific experts pertaining to three topics (i.e., epigenetic changes associated with diverse stressors, key science considerations in understanding epigenetic changes, and practical application of epigenetic tools to address cumulative risks from environmental stressors), to address several questions under each topic, and included an opportunity for attendees to participate in break-out groups, provide comments and ask questions. Workshop Goals The workshop seeks to examine the opportunity for use of aggregate epigenetic change as an indicator in cumulative risk assessment for populations exposed to multiple stressors that affect epigenetic status. Epigenetic changes are specific molecular changes around DNA that alter expression of genes. Epigenetic changes include DNA methylation, formation of histone adducts, and changes in micro RNAs. Research today indicates that epigenetic changes are involved in many chronic diseases (cancer, cardiovascular disease, obesity, diabetes, mental health disorders, and asthma). Research has also linked a wide range of stressors including pollution and social factors with occurrence of epigenetic alterations. Epigenetic changes have the potential to reflect impacts of risk factors across multiple stages of life. Only recently receiving attention is the nexus between the factors of cumulative exposure to environmental

How to put on an ANS teachers' workshop

International Nuclear Information System (INIS)

Besmann, T.M.

1991-01-01

One of the most successful public outreach programs organized by the American Nuclear Society (ANS) has been the teachers' workshops. They are so highly thought of that a national meeting is considered incomplete without an attendant workshop. The workshops are also included in topical meetings, and a number are simply organized by local sections with no connection to a technical meeting. The accumulated experience with these workshops has now matured to where a set of reasonable guidelines can be established, although there are no guarantees of success or hard and fast rules

The Affording Mars Workshop: Background and Recommendations

Science.gov (United States)

Thronson, Harley A.; Carberry, Christopher

2014-01-01

A human mission to Mars is the stated "ultimate" goal for NASA and is widely believed by the public to be the most compelling destination for America's space program. However, widely cited enormous costs - perhaps as much as a trillion dollars for a many-decade campaign - seem to be an impossible hurdle, although political and budget instability over many years may be equally challenging. More recently, a handful of increasingly detailed architectures for initial Mars missions have been developed by commercial companies that have estimated costs much less than widely believed and roughly comparable with previous major human space flight programs: the Apollo Program, the International Space Station, and the space shuttle. Several of these studies are listed in the bibliography to the workshop report. As a consequence of these new scenarios, beginning in spring, 2013 a multiinstitutional planning team began developing the content and invitee list for a winter workshop that would critically assess concepts, initiatives, technology priorities, and programmatic options to reduce significantly the costs of human exploration of Mars. The output of the workshop - findings and recommendations - would be presented in a number of forums and discussed with national leaders in human space flight. It would also be made available to potential international partners. This workshop was planned from the start to be the first in a series. Subsequent meetings, conferences, and symposia will concentrate on topics not able to be covered in December. In addition, to make progress in short meeting, a handful of ground rules were adopted by the planning team and agreed to by the participants. Perhaps the two most notable such ground rules were (1) the Space Launch System (SLS) and Orion would be available during the time frame considered by the participants and (2) the International Space Station (ISS) would remain the early linchpin in preparing for Mars exploration over the coming decade

Summer 1994 Computational Science Workshop. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

This report documents the work performed by the University of New Mexico Principal Investigators and Research Assistants while hosting the highly successful Summer 1994 Computational Sciences Workshop in Albuquerque on August 6--11, 1994. Included in this report is a final budget for the workshop, along with a summary of the participants` evaluation of the workshop. The workshop proceeding have been delivered under separate cover. In order to assist in the organization of future workshops, we have also included in this report detailed documentation of the pre- and post-workshop activities associated with this contract. Specifically, we have included a section that documents the advertising performed, along with the manner in which applications were handled. A complete list of the workshop participants in this section. Sample letters that were generated while dealing with various commercial entities and departments at the University are also included in a section dealing with workshop logistics. Finally, we have included a section in this report that deals with suggestions for future workshops.

PREFACE: International Workshop on Dirac Electrons in Solids 2015

Science.gov (United States)

Ogata, M.; Suzumura, Y.; Fuseya, Y.; Matsuura, H.

2015-04-01

It is our pleasure to publish the Proceedings of the International Workshop on Dirac Electrons in Solids held in University of Tokyo, Japan, for January 14-15, 2015. The workshop was organized by the entitled project which lasted from April 2012 to March 2015 with 10 theorists. It has been supported by a Grand-in-Aid for Scientific Research (A) from the Ministry of Education, Culture, Sports, Science, and Technology, Japan. The subjects discussed in the workshop include bismuth, organic conductors, graphene, topological insulators, new materials including Ca3PbO, and new directions in theory (superconductivity, orbital susceptibility, etc). The number of participants was about 70 and the papers presented in the workshop include four invited talks, 16 oral presentations, and 23 poster presentations. Dirac electron systems appear in various systems, such as graphene, quasi-two-dimensional organic conductors, bismuth, surface states in topological insulators, new materials like Ca3PbO. In these systems, characteristic transport properties caused by the linear dispersion of Dirac electrons and topological properties, have been extensively discussed. In addition to these, there are many interesting research fields such as Spin-Hall effect, orbital diamagnetism due to interband effects, Landau levels characteristic to Dirac dispersion, anomalous interlayer transport phenomena and magnetoresistance, the effects of spin-orbit interaction, and electron correlation. The workshop focused on recent developments of theory and experiment of Dirac electron systems in the above materials. We note that all papers published in this volume of Journal of Physics: Conference Series were peer reviewed. Reviews were performed by expert referees with professional knowledge and high scientific standards in this field. Editors made efforts so that the papers may satisfy the criterion of a proceedings journal published by IOP Publishing. We hope that all the participants of the workshop

Proceedings of the fifteenth international workshop on ceramic breeder blanket interactions

International Nuclear Information System (INIS)

Tanigawa, Hisashi; Enoeda, Mikio

2010-03-01

This report is the Proceedings of 'the Fifteenth International Workshop on Ceramic Breeder Blanket Interactions' which was held as a workshop on ceramic breeders Under the IEA Implementing Agreement on the Nuclear Technology of Fusion Reactors. This workshop was held in Sapporo, Japan on 3-4, Sept. 2009. Twenty six participants from EU, Japan, India, Russia and USA attended the workshop. The scope of the workshop included 1) evolutions in ceramic breeder blanket design, 2) progress in ceramic breeder material development, 3) irradiation testing, 4) breeder material properties, 5) out-of-pile pebble bed experiment, 6) modeling of the thermal, mechanical and tritium transfer behavior of pebble beds and 7) interfacing issues of solid breeder blanket development. By this workshop, advance of key technologies for solid breeder blanket development was shared among the participants. Also, desired direction of further investigation and development was recognized. The 20 of the presented papers are indexed individually. (J.P.N.)

Proceedings of the fifteenth international workshop on ceramic breeder blanket interactions

Energy Technology Data Exchange (ETDEWEB)

Tanigawa, Hisashi; Enoeda, Mikio [Japan Atomic Energy Agency, Fusion Research and Development Directorate, Naka, Ibaraki (Japan)

2010-03-15

This report is the Proceedings of 'the Fifteenth International Workshop on Ceramic Breeder Blanket Interactions' which was held as a workshop on ceramic breeders Under the IEA Implementing Agreement on the Nuclear Technology of Fusion Reactors. This workshop was held in Sapporo, Japan on 3-4, Sept. 2009. Twenty six participants from EU, Japan, India, Russia and USA attended the workshop. The scope of the workshop included 1) evolutions in ceramic breeder blanket design, 2) progress in ceramic breeder material development, 3) irradiation testing, 4) breeder material properties, 5) out-of-pile pebble bed experiment, 6) modeling of the thermal, mechanical and tritium transfer behavior of pebble beds and 7) interfacing issues of solid breeder blanket development. By this workshop, advance of key technologies for solid breeder blanket development was shared among the participants. Also, desired direction of further investigation and development was recognized. The 20 of the presented papers are indexed individually. (J.P.N.)

ASCR Workshop on Quantum Computing for Science

Energy Technology Data Exchange (ETDEWEB)

Aspuru-Guzik, Alan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Van Dam, Wim [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Farhi, Edward [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gaitan, Frank [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Humble, Travis [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jordan, Stephen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Landahl, Andrew J [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Love, Peter [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lucas, Robert [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Preskill, John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Muller, Richard P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Svore, Krysta [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wiebe, Nathan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Williams, Carl [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-06-01

This report details the findings of the DOE ASCR Workshop on Quantum Computing for Science that was organized to assess the viability of quantum computing technologies to meet the computational requirements of the DOE’s science and energy mission, and to identify the potential impact of quantum technologies. The workshop was held on February 17-18, 2015, in Bethesda, MD, to solicit input from members of the quantum computing community. The workshop considered models of quantum computation and programming environments, physical science applications relevant to DOE's science mission as well as quantum simulation, and applied mathematics topics including potential quantum algorithms for linear algebra, graph theory, and machine learning. This report summarizes these perspectives into an outlook on the opportunities for quantum computing to impact problems relevant to the DOE’s mission as well as the additional research required to bring quantum computing to the point where it can have such impact.

Report on a NASA astrobiology institute-funded workshop without walls: stellar stoichiometry.

Science.gov (United States)

Desch, Steven J; Young, Patrick A; Anbar, Ariel D; Hinkel, Natalie; Pagano, Michael; Truitt, Amanda; Turnbull, Margaret

2014-04-01

We report on the NASA Astrobiology Institute-funded Workshop Without Walls entitled "Stellar Stoichiometry," hosted by the "Follow the Elements" team at Arizona State University in April 2013. We describe several innovative practices we adopted that made effective use of the Workshop Without Walls videoconferencing format, including use of information technologies, assignment of scientific tasks before the workshop, and placement of graduate students in positions of authority. A companion article will describe the scientific results arising from the workshop. Our intention here is to suggest best practices for future Workshops Without Walls.

Fifteenth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

1990-01-01

The Fifteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 23--25, 1990. Major topics included: DOE's geothermal research and development program, well testing, field studies, geosciences, geysers, reinjection, tracers, geochemistry, and modeling.

International cooperation workshop. Regional workshop for CTBTO international cooperation: Africa

International Nuclear Information System (INIS)

1999-08-01

Pursuant to the 1999 programme of work, and following the International Cooperation Workshop held in Vienna, Austria, in 1998, the Provisional Technical Secretariat (PTS) of the Preparatory Commission for the CTBTO (Prep Com) held a regional Workshop for CTBTO International Cooperation in Cairo. The purpose of the workshop was to identify how and by what means the Africa region can promote international cooperation in CTBT verification related technologies, and how the region can benefit from and contribute to Prep Com activity. PTS staff briefed the 40 participants from 22 African States who attended the Workshop on general aspects, including costs, of the establishment and operation of the CTBT verification system, including its four monitoring technologies. Participants were informed on opportunities for local institutions in the establishment of monitoring stations and on possible support for national and regional data centres. National experts presented their research and development activities and reviewed existing experiences on bi/multi-lateral cooperation. The main points of the discussion focused on the need to engage governments to advance signature/ratification, and further training opportunities for African states

Report on the second international workshop on residential radon: Workshop proceedings

International Nuclear Information System (INIS)

1991-07-01

As a follow-on to the first International Workshop on Residential Radon Epidemiology held in Alexandria VA, on July 24-26, 1989, a Second Workshop was convened, in Alexandria, VA, July 22-23 1991, also under the auspices of the US Department of Energy and the Commission of European Communities. The Workshop, co-chaired by Jonathan Samet and Jan Stolwijk, was attended by 20 active participants from seven countries representing epidemiologic studies recently completed, currently in progress, or in the last stages of preparation. The studies reported on are being conducted in the United States, Canada, Sweden, the United Kingdom, France, Belgium, Germany and the Peoples' Republic of China. The invited presentations that initiated the Workshop focused on a number of methodological problems that have surfaced in the last few years. Among these were: (1) the difficulties in predicting indoor radon concentrations, based on geologic information, (discussed by Alan Tanner, formerly of the US Geologic Survey); (2) the relationships between indoor radon concentrations and building characteristics (discussed by Richard Sextro, Lawrence Berkeley Laboratory, USA); (3) the approaches to analysis of case-control studies in radon epidemiology (discussed by Sarah Darby, Imperial Cancer Research Fund, UK); (4) statistical approaches to error in measurements and missing data (discussed by Donna Spiegelman, Tufts University, USA); (5) preliminary results of a data pooling effort dealing with several different studies of residential radon epidemiology and the lessons to be drawn from this effort (discussed by Jay Lubin, US National Cancer Institute)

Proceedings of the sixth international workshop on ceramic breeder blanket interactions

Energy Technology Data Exchange (ETDEWEB)

Noda, Kenji [ed.

1998-03-01

This report is the Proceedings of `the Sixth International Workshop on Ceramic Breeder Blanket Interactions` which was held as a workshop on ceramic breeders under Annex II of IEA Implementing Agreement on a Programme of Research and Development on Fusion Materials, and Japan-US Workshop 97FT4-01. This workshop was held in Mito city, Japan on October 22-24, 1997. About forty experts from EU, Japan, USA, and Chile attended the workshop. The scope of the workshop included the following: (1) fabrication and characterization of ceramic breeders, (2) properties data for ceramic breeders, (3) tritium release characteristics, (4) modeling of tritium behavior, (5) irradiation effects on performance behavior, (6) blanket design and R and D requirements, (7) hydrogen behavior in materials, and (8) blanket system technology and structural materials. In the workshop, information exchange was performed for fabrication technology of ceramic breeder pebbles in EU and Japan, data of various properties of Li{sub 2}TiO{sub 3}, tritium release behavior of Li{sub 2}TiO{sub 3} and Li{sub 2}ZrO{sub 3} including tritium diffusion, modeling of tritium release from Li{sub 2}ZrO{sub 3} in ITER condition, helium release behavior from Li{sub 2}O, results of tritium release irradiation tests of Li{sub 4}SiO{sub 4} pebbles in EXOTIC-7, R and D issues for ceramic breeders for ITER and DEMO blankets, etc. The 23 of the papers are indexed individually. (J.P.N.)

ECIR 2015 workshop on gamification for information retrieval (GamifIR'15)

OpenAIRE

Kazai, Gabriella; Hopfgartner, Frank; Kruschwitz, Udo; Meder, Micharl

2015-01-01

The second workshop on Gamification for Information Retrieval took place at ECIR 2015 in Vienna, Austria on the 29th of March. The workshop program included two invited keynote presentations, seven oral presentations of refereed papers, lots of mini discussion sessions and a fishbowl session. The presentations covered diverse topics from playing around with an eye tracker to a game with IR papers and even a game of scientific hangman, generating lively and fun discussions. The workshop was a ...

New ways of networking: A hands on workshop exploring the workspace:lab and its equipment

DEFF Research Database (Denmark)

Lundsgaard, Christina; Souza da Conceição, Carolina; Eriksson, Johanna

2013-01-01

Are you interested in designing new ways of networking at the Nordes conference with fellow researchers? Do you want to explore and discuss the so called “workspacelab” as a platform for user involvement? This workshop invites participants to explore a particular version of the design:lab called ...

Workshop on photon activation therapy: proceedings

Energy Technology Data Exchange (ETDEWEB)

Fairchild, R.G. (ed.)

1985-04-18

This Workshop was held concurrently with an IAEA Research Coordination Meeting on Exploration of the Possibility of High-LET Radiation for Non-conventional Radiotherapy in Cancer. The Workshop on Photon Activation Therapy (PAT) was given as a special session on April 18, as it was thoght PAT might eventually be found to be attractive to developing countries, which is a major concern of the IAEA. An effort was made to bring together representatives of the various groups known to be actively working on PAT; these included investigators from Sweden and Japan as well as the US. It is hoped that this compendium of papers will be of use to those currently active in this developing field, as well as to those who might join this area of endeavor in the future.

TFTR/JET INTOR workshop on plasma transport tokamaks

International Nuclear Information System (INIS)

Singer, C.E.

1985-01-01

This report summarizes the proceedings of a Workshop on transport models for prediction and analysis of tokamak plasma confinement. Summaries of papers on theory, predictive modeling, and data analysis are included

Twelfth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Rivera, J. (Stanford Geothermal Program)

1987-01-22

Preface The Twelfth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 20-22, 1987. The year ending December 1986 was very difficult for the domestic geothermal industry. Low oil prices caused a sharp drop in geothermal steam prices. We expected to see some effect upon attendance at the Twelfth Workshop. To our surprise, the attendance was up by thirteen from previous years, with one hundred and fifty-seven registered participants. Eight foreign countries were represented: England, France, Iceland, Italy, Japan, Mexico, New Zealand, and Turkey. Despite a worldwide surplus of oil, international geothermal interest and development is growing at a remarkable pace. There were forty-one technical presentations at the Workshop. All of these are published as papers in this Proceedings volume. Seven technical papers not presented at the Workshop are also published; they concern geothermal developments and research in Iceland, Italy, and New Zealand. In addition to these forty-eight technical presentations or papers, the introductory address was given by Henry J. Ramey, Jr. from the Stanford Geothermal Program. The Workshop Banquet speaker was John R. Berg from the Department of Energy. We thank him for sharing with the Workshop participants his thoughts on the expectations of this agency in the role of alternative energy resources, specifically geothermal, within the country???s energy framework. His talk is represented as a paper in the back of this volume. The chairmen of the technical sessions made an important contribution to the workshop. Other than Stanford faculty members they included: M. Gulati, K. Goyal, G.S. Bodvarsson, A.S. Batchelor, H. Dykstra, M.J. Reed, A. Truesdell, J.S. Gudmundsson, and J.R. Counsil. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and students. We would like to thank Jean Cook, Marilyn King, Amy Osugi, Terri Ramey, and Rosalee Benelli for their valued help with the meeting

Opening Session - Introductory remarks for Workshop on Accident Tolerant Fuel. OECD/NEA Workshop on Accident Tolerant Fuels, Workshop Expectations

International Nuclear Information System (INIS)

Dujardin, Thierry; Gulliford, Jim; Massara, Simone; Pasamehmetoglu, K.

2013-01-01

The workshop opened with the welcome address from Th. Dujardin (OECD/NEA), NEA Deputy Director. Th. Dujardin recalled the integrated NEA response to the dramatic Fukushima-Daiichi events performed by three standing technical committees: the Committee on Nuclear Regulatory Activities (CNRA), the Committee on the Safety of Nuclear Installations (CSNI) and the Committee on Radiation Protection and Public Health (CRPPH). J. Gulliford (OECD/NEA) placed the workshop in the context of the activities of the Nuclear Science Committee within the framework of the NEA response to Fukushima- Daiichi. K. Pasamehmetoglu (INL, US) explained the main goals of the workshop oriented towards defining requirements for selection among various options during the feasibility phase of the development process, and not towards identifying and proposing design solutions

MO-AB-210-03: Workshop [Advancements in high intensity focused ultrasound

Energy Technology Data Exchange (ETDEWEB)

Lu, Z. [University of Chicago (United States)

2015-06-15

The goal of this ultrasound hands-on workshop is to demonstrate advancements in high intensity focused ultrasound (HIFU) and to demonstrate quality control (QC) testing in diagnostic ultrasound. HIFU is a therapeutic modality that uses ultrasound waves as carriers of energy. HIFU is used to focus a beam of ultrasound energy into a small volume at specific target locations within the body. The focused beam causes localized high temperatures and produces a well-defined regions of necrosis. This completely non-invasive technology has great potential for tumor ablation and targeted drug delivery. At the workshop, attendees will see configurations, applications, and hands-on demonstrations with on-site instructors at separate stations. The involvement of medical physicists in diagnostic ultrasound imaging service is increasing due to QC and accreditation requirements. At the workshop, an array of ultrasound testing phantoms and ultrasound scanners will be provided for attendees to learn diagnostic ultrasound QC in a hands-on environment with live demonstrations of the techniques. Target audience: Medical physicists and other medical professionals in diagnostic imaging and radiation oncology with interest in high-intensity focused ultrasound and in diagnostic ultrasound QC. Learning Objectives: Learn ultrasound physics and safety for HIFU applications through live demonstrations Get an overview of the state-of-the art in HIFU technologies and equipment Gain familiarity with common elements of a quality control program for diagnostic ultrasound imaging Identify QC tools available for testing diagnostic ultrasound systems and learn how to use these tools List of supporting vendors for HIFU and diagnostic ultrasound QC hands-on workshop: Philips Healthcare Alpinion Medical Systems Verasonics, Inc Zonare Medical Systems, Inc Computerized Imaging Reference Systems (CIRS), Inc. GAMMEX, Inc., Cablon Medical BV Steffen Sammet: NIH/NCI grant 5R25CA132822, NIH/NINDS grant 5R25NS

GamifIR 2016 - SIGIR 2016 Workshop on Gamification for Information Retrieval

OpenAIRE

Meder, Michael; Hopfgartner, Frank; Kazai, Gabriella; Kruschwitz, Udo

2016-01-01

The third workshop on Gamification for Information Retrieval (GamifIR) took place on\\ud the 21th of July 2016 in conjunction with SIGIR 2016 in Pisa, Italy. It was the first GamifIR\\ud held in conjunction with the SIGIR, the first and second GamifIR workshops were both colocated\\ud with ECIR. The workshop program included one invited keynote presentation, seven\\ud paper presentations and a discussion session. The keynote presentation stated the necessity\\ud of proper theory for gamification d...

Oversight and Influencing of Licensee Leadership and Management for Safety, Including Safety Culture - Regulatory Approaches and Methods. Proceedings of an NEA/IAEA Workshop, Chester, United Kingdom, 26-28 September 2011

International Nuclear Information System (INIS)

2012-01-01

Both regulators and the nuclear industry recognise the need for licensees to develop a strong, positive safety culture to support successful and sustainable nuclear safety performance. A number of reports have been issued by the IAEA and the NEA on the role of the regulator in relation to oversight of safety culture (References 1 to 5). There has been less clarity on how this should be achieved - in particular, with regard to strategies and practical approaches for maintaining oversight of, and influencing, those facets of licensee leadership and management which have a profound influence on safety culture. In recognition of this, the CSNI Working Group on Human and Organisational Factors (WGHOF), together with the CNRA Working Group on Inspection Practices (WGIP) and the IAEA, organised a workshop in Chester, United Kingdom, in May 2007 to provide a forum for gathering and sharing international experience, including good practices and learning points. The results of the workshop are reported in Reference 6. Workshop participants agreed that, in view of the rapidly developing approaches in this area, it would be sensible to hold a further workshop ('Chester 2') in 3-5 years in order to discuss how regulatory approaches have moved on and to share lessons learned from their application. In 2010, the WGIP hosted a workshop which included regulatory approaches for the assessment of licensee safety culture as a discussion topic. The outputs of the workshop included a list of commendable practices for monitoring and evaluating licensee safety culture (Reference 7). The 'Chester 2' workshop took place in September 2011. This report sets out the findings of the workshop, organised by the UK Office for Nuclear Regulation (ONR) on behalf of the CSNI/WGHOF and the IAEA. The workshop was attended by over 40 representatives of nuclear regulatory bodies and licensees from 15 countries plus IAEA and NEA. The workshop featured keynote papers on learning from major events, and from

Workshop on rock mechanics issues in repository design and performance assessment

International Nuclear Information System (INIS)

1996-04-01

The Center for Nuclear Waste Regulatory Analyses organized and hosted a workshop on ''Rock Mechanics Issues in Repository Design and Performance Assessment'' on behalf its sponsor the U.S. Nuclear Regulatory Commission (NRC). This workshop was held on September 19- 20, 1994 at the Holiday Inn Crowne Plaza, Rockville, Maryland. The objectives of the workshop were to stimulate exchange of technical information among parties actively investigating rock mechanics issues relevant to the proposed high-level waste repository at Yucca Mountain and identify/confirm rock mechanics issues important to repository design and performance assessment The workshop contained three technical sessions and two panel discussions. The participants included technical and research staffs representing the NRC and the Department of Energy and their contractors, as well as researchers from the academic, commercial, and international technical communities. These proceedings include most of the technical papers presented in the technical sessions and the transcripts for the two panel discussions

The 13th International Workshop on Targetry and Target Chemistry Proceedings

DEFF Research Database (Denmark)

Haroun, Samar; Givskov, Alex David; Jensen, Mikael

in situ target chemistry and the engineering required to optimize production yields. In the workshop, experience, ideas and information are freely and openly shared; learning and collaborations are fostered, with active participation by all attendees. This participation includes both formal and informal......This report contains the complete proceedings of the 13th International Workshop on Targetry and Target Chemistry. The Workshop was held at Risø National Laboratory for Sustainable Energy on July 26-28 2010. The workshop deals with the development of methods and systems for efficient production...... of the WTTC is to advance the science associated with radioisotope production targetry. The Workshops are designed to bring experienced targetry scientists together with newcomers to the field, both from industry and academia, to discuss issues of targetry and target chemistry and approaches to exploring...

Proceedings: 2nd IEA international workshop on beryllium technology for fusion

Energy Technology Data Exchange (ETDEWEB)

Longhurst, G.R.

1995-09-01

The 2nd IEA International Workshop on Beryllium Technology for Fusion was held September 6--8, 1995 at Jackson Lake Lodge, Wyoming. Forty-four participants took part in the workshop representing Europe, Japan, the Russian Federation, and the United States including representatives from both government laboratories and private industry. The workshop was divided into six technical sessions and a ``town meeting`` panel discussion. Technical sessions addressed the general topics of: Thermomechanical Properties; Manufacturing Technologies; Radiation Effects; Plasma/Tritium Interactions; Safety, Applications, and Design; and Joining and Testing. This volume contains the majority of the papers presented at the workshop. In some instances, the authors of the papers could not be present at the workshop, and the papers were given by others, sometimes in summary form and in some instances combined with others. The full papers are included here in the sequence in which they would have been given. In other instances, presentations were made but no papers were submitted for publication. Those papers do not appear here. In summary, the workshop was very successful. The main objectives of bringing key members of the fusion beryllium community together was certainly met. Forty-four participants registered, and 35 papers were presented. Individual papers are indexed separately on the energy data bases.

Proceedings: 2nd IEA international workshop on beryllium technology for fusion

International Nuclear Information System (INIS)

Longhurst, G.R.

1995-09-01

The 2nd IEA International Workshop on Beryllium Technology for Fusion was held September 6--8, 1995 at Jackson Lake Lodge, Wyoming. Forty-four participants took part in the workshop representing Europe, Japan, the Russian Federation, and the United States including representatives from both government laboratories and private industry. The workshop was divided into six technical sessions and a ''town meeting'' panel discussion. Technical sessions addressed the general topics of: Thermomechanical Properties; Manufacturing Technologies; Radiation Effects; Plasma/Tritium Interactions; Safety, Applications, and Design; and Joining and Testing. This volume contains the majority of the papers presented at the workshop. In some instances, the authors of the papers could not be present at the workshop, and the papers were given by others, sometimes in summary form and in some instances combined with others. The full papers are included here in the sequence in which they would have been given. In other instances, presentations were made but no papers were submitted for publication. Those papers do not appear here. In summary, the workshop was very successful. The main objectives of bringing key members of the fusion beryllium community together was certainly met. Forty-four participants registered, and 35 papers were presented. Individual papers are indexed separately on the energy data bases

Workshops on photonics and optoinformatics for school students at ITMO University

Science.gov (United States)

Andreeva, Natalia; Ismagilov, Azat; Kuzmina, Tatiana; Kozlov, Sergei

2017-08-01

The program of workshops on photonics and optoinformatics was created at Department of Photonics and Optical Information Technologies in ITMO University by specialists in scientific and educational areas. These workshops are carried out for students of the best schools of Saint-Petersburg specialized in physics and mathematics, such as Gubernatorial Lyceum and Presidential Lyceum, and best schools of Russia. Every year about 500 of school students come to our workshops, including Annual summer educational practice.

CSI: Dognapping workshop : an outreach experiment designed to produce students that are hooked on science.

Energy Technology Data Exchange (ETDEWEB)

Boyle, Timothy J.; Gorman, Anna K.; Pratt, Harry D., III; Hernandez-Sanchez, Bernadette A.; Lambert, Timothy N.; Ottley, Leigh Anna M.; Baros, Christina Marie

2008-04-01

The CSI: Dognapping Workshop is a culmination of the more than 65 Sandian staff and intern volunteers dedication to exciting and encouraging the next generation of scientific leaders. This 2 hour workshop used a 'theatrical play' and 'hands on' activities that was fun, exciting and challenging for 3rd-5th graders while meeting science curriculum standards. In addition, new pedagogical methods were developed in order to introduce nanotechnology to the public. Survey analysis indicated that the workshop had an overall improvement and positive impact on helping the students to understand concepts from materials science and chemistry as well as increased our interaction with the K-5 community. Anecdotal analyses showed that this simple exercise will have far reaching impact with the results necessary to maintain the United States as the scientific leader in the world. This experience led to the initiation of over 100 Official Junior Scientists.

Workshop on Developing Safe Software

International Nuclear Information System (INIS)

Lawrence, J.D.

1994-11-01

The Workshop on Developing Safe Software was held July 22--23, 1992, at the Hotel del Coronado, San Diego, California. The purpose of the workshop was to have four world experts discuss among themselves software safety issues which are of interest to the US Nuclear Regulatory Commission. These issues concern the development of software systems for use in nuclear power plant protection systems. The workshop comprised four sessions. Wednesday morning, July 22, consisted of presentations from each of the four panel members. On Wednesday afternoon, the panel members went through a list of possible software development techniques and commented on them. The Thursday morning, July 23, session consisted of an extended discussion among the panel members and the observers from the NRC. A final session on Thursday afternoon consisted of a discussion among the NRC observers as to what was learned from the workshop

Workshop on developing safe software

International Nuclear Information System (INIS)

Lawrence, J.D.

1992-01-01

The Workshop on Developing Safe Software was held July 22--23 at the Hotel del Coronado, San Diego, California. The purpose of the workshop was to have four world experts discuss among themselves software safety issues which are of interest to the U. S. Nuclear Regulatory Commission (NRC). These issues concern the development of software systems for use in nuclear power plant protection systems. The workshop comprised four sessions. Wednesday morning, July 22, consisted of presentations from each of the four panel members. On Wednesday afternoon, the panel members went through a list of possible software development techniques and commented on them. The Thursday morning, July 23, session consisted of an extended discussion among the panel members and the observers from the NRC. A final session on Thursday afternoon consisted of a discussion among the NRC observers as to what was teamed from the workshop

Workshop on Precision Measurements of $\\alpha_s$

Energy Technology Data Exchange (ETDEWEB)

Bethke, Siegfried; /Munich, Max Planck Inst.; Hoang, Andre H.; /Vienna U.; Kluth, Stefan; /Munich, Max Planck Inst.; Schieck, Jochen; /Munich U.; Stewart, Iain W.; Aoki, S.; Beneke, M.; Bethke, S.; Blumlein, J.; Brambilla, N.; Brodsky, S.; /MIT, LNS

2011-10-01

These are the proceedings of the Workshop on Precision Measurements of {alpha}{sub s} held at the Max-Planck-Institute for Physics, Munich, February 9-11, 2011. The workshop explored in depth the determination of {alpha}{sub s}(m{sub Z}) in the {ovr MS} scheme from the key categories where high precision measurements are currently being made, including DIS and global PDF fits, {tau}-decays, electro-weak precision observables and Z-decays, event-shapes, and lattice QCD. These proceedings contain a short summary contribution from the speakers, as well as the lists of authors, conveners, participants, and talks.

PREFACE: EMAS 2013 Workshop: 13th European Workshop on Modern Developments and Applications in Microbeam Analysis

Science.gov (United States)

Llovet, Xavier, Dr; Matthews, Mr Michael B.; Brisset, François, Dr; Guimarães, Fernanda, Dr; Vieira, Professor Joaquim M., Dr

2014-03-01

This volume of the IOP Conference Series: Materials Science and Engineering contains papers from the 13th Workshop of the European Microbeam Analysis Society (EMAS) on Modern Developments and Applications in Microbeam Analysis which took place from the 12th to the 16th of May 2013 in the Centro de Congressos do Alfândega, Porto, Portugal. The primary aim of this series of workshops is to assess the state-of-the-art and reliability of microbeam analysis techniques. The workshops also provide a forum where students and young scientists starting out on a career in microbeam analysis can meet and discuss with the established experts. The workshops have a very specific format comprising invited plenary lectures by internationally recognized experts, poster presentations by the participants and round table discussions on the key topics led by specialists in the field. This workshop was organized in collaboration with LNEG - Laboratório Nacional de Energia e Geologia and SPMICROS - Sociedade Portuguesa de Microscopia. The technical programme included the following topics: electron probe microanalysis, future technologies, electron backscatter diffraction (EBSD), particle analysis, and applications. As at previous workshops there was also a special oral session for young scientists. The best presentation by a young scientist was awarded with an invitation to attend the 2014 Microscopy and Microanalysis meeting at Hartford, Connecticut. The prize went to Shirin Kaboli, of the Department of Metals and Materials Engineering of McGill University (Montréal, Canada), for her talk entitled ''Plastic deformation studies with electron channelling contrast imaging and electron backscattered diffraction''. The continuing relevance of the EMAS workshops and the high regard in which they are held internationally can be seen from the fact that 74 posters from 21 countries were on display at the meeting and that the participants came from as far away as Japan, Canada and the USA. A

Challenges of radiotherapy: report on the 4D treatment planning workshop 2013

NARCIS (Netherlands)

Knopf, Antje; Nill, Simeon; Yohannes, Indra; Graeff, Christian; Dowdell, Stephen; Kurz, Christopher; Sonke, Jan-Jakob; Biegun, Aleksandra K; Lang, Stephanie; McClelland, Jamie R.; Champion, Benjamin; Fast, Martin; Wölfelschneider, Jens; Gianoli, Chiara; Rucinski, Antoni; Baroni, Guido; Richter, Christian; van de Water, Steven; Grassberger, Clemens; Weber, Damien; Poulsen, Per; Shimizu, Shinichi; Bert, Christoph

2014-01-01

This report, compiled by experts on the treatment of mobile targets with advanced radiotherapy, summarizes the main conclusions and innovations achieved during the 4D treatment planning workshop 2013. This annual workshop focuses on research aiming to advance 4D radiotherapy treatments, including

IOC/WMO Workshop on Marine Pollution Monitoring (3rd, New Delhi, India, February 11-15, 1980). Summary Report. Workshop Report No. 22.

Science.gov (United States)

United Nations Educational, Scientific, and Cultural Organization, Paris (France). Intergovernmental Oceanographic Commission.

Provided is a summary report of the third IOC/WMO (Intergovernmental Oceanographic Commission/World Meteorological Organization) workshop of marine pollution monitoring. Summaries are presented in nine sections, including: (1) workshop opening; (2) welcoming addresses; (3) reports on the Marine Pollution (Petroleum) Monitoring Pilot Project…

11th International Workshop on Railway Noise

CERN Document Server

Anderson, David; Gautier, Pierre-Etienne; Iida, Masanobu; Nelson, James; Thompson, David; Tielkes, Thorsten; Towers, David; Vos, Paul

2015-01-01

The book reports on the 11th International Workshop on Railway Noise, held on 9 – 13 September, 2013, in Uddevalla, Sweden. The event, which was jointly organized by the Competence Centre Chalmers Railway Mechanics (CHARMEC) and the Departments of Applied Mechanics and Applied Acoustics at Chalmers University of Technology in Gothenburg, Sweden, covered a broad range of topics in the field of railway noise and vibration, including: prospects, legal regulations and perceptions; wheel and rail noise; prediction, measurements and monitoring; ground-borne vibration; squeal noise and structure-borne noise; and aerodynamic noise generated by high-speed trains. Further topics included: resilient track forms; grinding, corrugation and roughness; and interior noise and sound barriers. This book, which consists of a collection of peer-reviewed papers originally submitted to the workshop, not only provides readers with an overview of the latest developments in the field, but also offers scientists and engineers essent...

AAAI Workshop on Nonmonotonic Reasoning

OpenAIRE

Etherington, David

1985-01-01

On October 17-19 1984 a workshop on non-monotonic reasoning was held at Mohonk Mountain House, outside New Paltz, New York. The workshop was organized by Raymond Reiter and Bonnie Webber, and was sponsored by the Association for the Advancement of Artificial Intelligence.

Lunar Reconnaissance Orbiter Lunar Workshops for Educators

Science.gov (United States)

Jones, A. P.; Hsu, B. C.; Hessen, K.; Bleacher, L.

2012-12-01

The Lunar Workshops for Educators (LWEs) are a series of weeklong professional development workshops, accompanied by quarterly follow-up sessions, designed to educate and inspire grade 6-12 science teachers, sponsored by the Lunar Reconnaissance Orbiter (LRO). Participants learn about lunar science and exploration, gain tools to help address common student misconceptions about the Moon, find out about the latest research results from LRO scientists, work with data from LRO and other lunar missions, and learn how to bring these data to their students using hands-on activities aligned with grade 6-12 National Science Education Standards and Benchmarks and through authentic research experiences. LWEs are held around the country, primarily in locations underserved with respect to NASA workshops. Where possible, workshops also include tours of science facilities or field trips intended to help participants better understand mission operations or geologic processes relevant to the Moon. Scientist and engineer involvement is a central tenant of the LWEs. LRO scientists and engineers, as well as scientists working on other lunar missions, present their research or activities to the workshop participants and answer questions about lunar science and exploration. This interaction with the scientists and engineers is consistently ranked by the LWE participants as one of the most interesting and inspiring components of the workshops. Evaluation results from the 2010 and 2011 workshops, as well as preliminary analysis of survey responses from 2012 participants, demonstrated an improved understanding of lunar science concepts among LWE participants in post-workshop assessments (as compared to identical pre-assessments) and a greater understanding of how to access and effectively share LRO data with students. Teachers reported increased confidence in helping students conduct research using lunar data, and learned about programs that would allow their students to make authentic

8th International Workshop on Simulation

CERN Document Server

Rasch, Dieter; Melas, Viatcheslav; Moder, Karl; Statistics and simulation

2018-01-01

This volume features original contributions and invited review articles on mathematical statistics, statistical simulation and experimental design. The selected peer-reviewed contributions originate from the 8th International Workshop on Simulation held in Vienna in 2015. The book is intended for mathematical statisticians, Ph.D. students and statisticians working in medicine, engineering, pharmacy, psychology, agriculture and other related fields. The International Workshops on Simulation are devoted to statistical techniques in stochastic simulation, data collection, design of scientific experiments and studies representing broad areas of interest. The first 6 workshops took place in St. Petersburg, Russia, in 1994 – 2009 and the 7th workshop was held in Rimini, Italy, in 2013.

Proceedings of the Third International Workshop on Jointed Structures.

Energy Technology Data Exchange (ETDEWEB)

Starr, Michael James; Brake, Matthew Robert; Segalman, Daniel Joseph; Bergman, Lawrence A.; Ewins, David J.

2013-08-01

The Third International Workshop on Jointed Structures was held from August 16th to 17th, 2012, in Chicago Illinois, following the ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Thirty two researchers from both the United States and international locations convened to discuss the recent progress of mechanical joints related research and associated efforts in addition to developing a roadmap for the challenges to be addressed over the next five to ten years. These proceedings from the workshop include the minutes of the discussions and follow up from the 2009 workshop [1], presentations, and outcomes of the workshop. Specifically, twelve challenges were formulated from the discussions at the workshop, which focus on developing a better understanding of uncertainty and variability in jointed structures, incorporating high fidelity models of joints in simulations that are tractable/efficient, motivating a new generation of researchers and funding agents as to the importance of joint mechanics research, and developing new insights into the physical phenomena that give rise to energy dissipation in jointed structures. The ultimate goal of these research efforts is to develop a predictive model of joint mechanics.

Summary Report of the Workshop on the Experimental Nuclear Reaction Data Database

International Nuclear Information System (INIS)

Semkova, V.; Pritychenko, B.

2014-12-01

The Workshop on the Experimental Nuclear Reaction Data Database (EXFOR) was held at IAEA Headquarters in Vienna from 6 to 10 October 2014. The workshop was organized to discuss various aspects of the EXFOR compilation process including compilation rules, different techniques for nuclear reaction data measurements, software developments, etc. A summary of the presentations and discussions that took place during the workshop is reported here. (author)

Summary Report of the Workshop on The Experimental Nuclear Reaction Data Database

Energy Technology Data Exchange (ETDEWEB)

Semkova, V. [IAEA Nuclear Data Section, Vienna (Austria); Pritychenko, B. [Brookhaven National Lab. (BNL), Upton, NY (United States)

2014-12-01

The Workshop on the Experimental Nuclear Reaction Data Database (EXFOR) was held at IAEA Headquarters in Vienna from 6 to 10 October 2014. The workshop was organized to discuss various aspects of the EXFOR compilation process including compilation rules, different techniques for nuclear reaction data measurements, software developments, etc. A summary of the presentations and discussions that took place during the workshop is reported here.

IAEA workshop on 'Atomic and molecular data for fusion energy research'. Summary report

International Nuclear Information System (INIS)

Clark, R.E.H.

2004-05-01

On September 8-12 a workshop on Atomic and Molecular (A+M) Data for Fusion Energy Research was hosted by the International Centre for Theoretical Physics in Trieste Italy. The workshop was attended by twelve students representing eleven Member States. A total of five lecturers, including four external to the Agency, made presentations to the workshop. All lecturers provided advance copies of the lecture materials and all provided written assignments for the students, to provide practical examples of applications of data issues to actual problems related to fusion energy research. All materials were collected on CDs, which were distributed to the students by the conclusion of the workshop. During the course of the workshop the students were given the opportunity to describe their backgrounds and research interests. The workshop did arouse interest in A+M processes related to fusion. The workshop was viewed as successful by the students. (author)

International Workshop on Diagnostics for ITER

CERN Document Server

Gorini, Giuseppe; Sindoni, Elio

1996-01-01

This book of proceedings collects the papers presented at the Workshop on Diagnostics for ITER, held at Villa Monastero, Varenna (Italy), from August 28 to September 1, 1995. The Workshop was organised by the International School of Plasma Physics "Piero Caldirola. " Established in 1971, the ISPP has organised over fifty advanced courses and workshops on topics mainly related to plasma physics. In particular, courses and workshops on plasma diagnostics (previously held in 1975, 1978, 1982, 1986, and 1991) can be considered milestones in the history of this institution. Looking back at the proceedings of the previous meetings in Varenna, one can appreciate the rapid progress in the field of plasma diagnostics over the past 20 years. The 1995 workshop was co-organised by the Istituto di Fisica del Plasma of the National Research Council (CNR). In contrast to previous Varenna meetings on diagnostics, which have covered diagnostics in present-day tokamaks and which have had a substantial tutorial component, the 1...

Reactor simulator development. Workshop material

International Nuclear Information System (INIS)

2001-01-01

The International Atomic Energy Agency (IAEA) has established a programme in nuclear reactor simulation computer programs to assist its Member States in education and training. The objective is to provide, for a variety of advanced reactor types, insight and practice in reactor operational characteristics and their response to perturbations and accident situations. To achieve this, the IAEA arranges for the supply or development of simulation programs and training material, sponsors training courses and workshops, and distributes documentation and computer programs. This publication consists of course material for workshops on development of such reactor simulators. Participants in the workshops are provided with instruction and practice in the development of reactor simulation computer codes using a model development system that assembles integrated codes from a selection of pre-programmed and tested sub-components. This provides insight and understanding into the construction and assumptions of the codes that model the design and operational characteristics of various power reactor systems. The main objective is to demonstrate simple nuclear reactor dynamics with hands-on simulation experience. Using one of the modular development systems, CASSIM tm , a simple point kinetic reactor model is developed, followed by a model that simulates the Xenon/Iodine concentration on changes in reactor power. Lastly, an absorber and adjuster control rod, and a liquid zone model are developed to control reactivity. The built model is used to demonstrate reactor behavior in sub-critical, critical and supercritical states, and to observe the impact of malfunctions of various reactivity control mechanisms on reactor dynamics. Using a PHWR simulator, participants practice typical procedures for a reactor startup and approach to criticality. This workshop material consists of an introduction to systems used for developing reactor simulators, an overview of the dynamic simulation

Proceedings of the CNRA Workshop on New Reactor Siting, Licensing and Construction Experience

International Nuclear Information System (INIS)

2011-01-01

This report documents the proceedings from the 'Workshop on New Reactor Siting, Licensing and Construction Experience', held in Prague, Czech Republic on 15-17 September 2010. A total of 59 specialists from 16 countries and international organisations attended. The Meeting was sponsored by the OECD Nuclear Energy Agency Committee on Nuclear Regulatory Activities and hosted by the State Office for Nuclear Safety (SUJB) in Czech Republic. The objectives of the workshop were to review and discuss recent and past construction experience lessons learned including perspectives from regulatory authorities, as well as vendors, and licensee. The workshop addressed issues associated with project management resources including: a) overall human resources, expertise, experience and organisation available to the licensee, b) capability of each potential vendor (in-house knowledge and skills versus planned subcontracting and subcontractor management). The workshop also discussed the lessons learned in the regulation of site selection, evaluation and site preparation as well as the review of regulatory practices for the licensing of new reactors, including the regulatory body infrastructure, staffing and expertise needed. The workshop provided an excellent opportunity to communicate recent experience on these topics to a wider audience, including participants from OECD member countries as well as New Entrants from non-OECD member countries. The workshop allowed the WGRNR group to introduce and discuss the current programme of work and products under development in order to gain insights from workshop participants on each of the programme of work areas, and get feedback on additional focus areas. The workshop was structured in 4 technical sessions, each followed by ample time for panel discussions. The first technical session was devoted to presentations of the licensing process for new reactors followed by different member countries. The second technical session was

20th Joint Workshop on Sustained Simulation Performance

CERN Document Server

Bez, Wolfgang; Focht, Erich; Patel, Nisarg; Kobayashi, Hiroaki

2016-01-01

The book presents the state of the art in high-performance computing and simulation on modern supercomputer architectures. It explores general trends in hardware and software development, and then focuses specifically on the future of high-performance systems and heterogeneous architectures. It also covers applications such as computational fluid dynamics, material science, medical applications and climate research and discusses innovative fields like coupled multi-physics or multi-scale simulations. The papers included were selected from the presentations given at the 20th Workshop on Sustained Simulation Performance at the HLRS, University of Stuttgart, Germany in December 2015, and the subsequent Workshop on Sustained Simulation Performance at Tohoku University in February 2016.

Report of the 7. Workshop on hadron interactions

International Nuclear Information System (INIS)

Hama, Y.; Navarra, F.S.; Nielsen, M.

1994-06-01

A report on the 7. workshop on hadron interactions is presented. Several works, both theoretical and experimental, on progress in hadron-hadron, hadron-nucleus and nucleus-nucleus interactions at very high energies are discussed. This includes cosmic ray interaction also

Report on the value engineering workshop on APS beamline front ends

International Nuclear Information System (INIS)

Kuzay, T.

1993-01-01

A formal value engineering evaluation process was developed to address the front end components of the beamlines for the Advanced Photon Source (APS). This process (described in Section 2) involved an information phase, a creative phase, a judgment phase, a development phase, and a recommendation phase. Technical experts from other national laboratories and industry were invited to a two-day Value Engineering Workshop on November 5-6, 1992. The results of this Workshop are described in Section 4. Following the Workshop, various actions by the APS staff led to the redesign of the front end components, which are presented in Sections 5 and 6. The cost benefit analysis is presented in Section 7. It is important of realize that an added benefit of the Workshop was to obtain numerous design evaluations and enhancements of the front end components by experts in the field. As the design work proceeds to Title II completion, the APS staff is including many of these suggestions

Workshop on rock mechanics issues in repository design and performance assessment

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-04-01

The Center for Nuclear Waste Regulatory Analyses organized and hosted a workshop on ``Rock Mechanics Issues in Repository Design and Performance Assessment`` on behalf its sponsor the U.S. Nuclear Regulatory Commission (NRC). This workshop was held on September 19- 20, 1994 at the Holiday Inn Crowne Plaza, Rockville, Maryland. The objectives of the workshop were to stimulate exchange of technical information among parties actively investigating rock mechanics issues relevant to the proposed high-level waste repository at Yucca Mountain and identify/confirm rock mechanics issues important to repository design and performance assessment The workshop contained three technical sessions and two panel discussions. The participants included technical and research staffs representing the NRC and the Department of Energy and their contractors, as well as researchers from the academic, commercial, and international technical communities. These proceedings include most of the technical papers presented in the technical sessions and the transcripts for the two panel discussions. Selected papers have been indexed separately for inclusion the Energy Science and Technology Database.

IAEA/ICTP/WNU workshop on managing nuclear knowledge. Presentations

International Nuclear Information System (INIS)

2005-01-01

The purpose of the workshop was to continue efforts to raise awareness of the nuclear knowledge management challenge, to share best practices, and provide a forum for the exchange of information among participating nuclear professionals. The need to manage (preserve and transfer) knowledge has been widely recognized in the international community. The need is compounded by aging work force issues in many industries and is not limited to areas of nuclear technology. The workshop was attended by 41 participants from 24 counties and three international organizations. Presentations by several of the participants covered a broad range of nuclear knowledge management issues, including the role of technology, preserving expert knowledge, and preparing the new generation of nuclear worker. The meeting covered methodological and design practices for NKM including the information technology impact on NKM implementation, presented the lessons learned and accumulated national experiences and good practices from NKM programs in academia, industry, the governmental sector and technical support organizations. The style of the meeting was series of leading presentations followed by working sessions discussing the issues raised and difficulties envisaged. All participants were actively involved in discussions, panel reviews and workshop activities. During the technical sessions participants presented case studies and examples from their national activities/projects. The following issues have been addressed during the Workshop as the issues forming the framework for activities in nuclear knowledge management: Policies and Strategies in Nuclear Science and Technology; Managing Nuclear Information Resources; Human Resources and Knowledge Transfer for the Nuclear Sector; Managing and Preserving Knowledge in Nuclear Sector; Networking for Education, Training and Knowledge Transfer. The issues outlined in the workshop program including strategies, approaches and current activities on the

Workshop on indoor air quality research needs

Energy Technology Data Exchange (ETDEWEB)

1980-01-01

Workshop participants report on indoor air quality research needs including the monitoring of indoor air quality, report of the instrumentation subgroup of indoor air quality, health effects, and the report of the control technology session. Risk analysis studies addressing indoor environments were also summarized. (DLS)

Workshop on indoor air quality research needs

International Nuclear Information System (INIS)

1980-01-01

Workshop participants report on indoor air quality research needs including the monitoring of indoor air quality, report of the instrumentation subgroup of indoor air quality, health effects, and the report of the control technology session. Risk analysis studies addressing indoor environments were also summarized

Tandem mirror theory workshop

International Nuclear Information System (INIS)

1981-05-01

The workshop was divided into three sections which were constituted according to subject matter: RF Heating, MHD Equilibrium and Stability, and Transport and Microstability. An overview from Livermore's point of view was given at the beginning of each session. Each session was assigned a secretary to take notes. These notes have been used in preparing this report on the workshop. The report includes the activities, conclusions, and recommendations of the workshop

Report on the final BRACElet workshop

Directory of Open Access Journals (Sweden)

Tony Clear

Full Text Available This paper reports on the thirteenth and final BRACElet workshop. In this paper we provide a brief retrospective review of the workshops and the findings that have resulted from this multi-institutional multinational investigation into the teaching and learning of novice programmers. Subsequently we report on the work undertaken during the final workshop and then discuss future avenues for research that have evolved as a result of the BRACElet project.

Virtual Workshop Experiences for Faculty: Lessons Learned from On the Cutting Edge

Science.gov (United States)

McDaris, J. R.; Kirk, K. B.; Mogk, D. W.; Bruckner, M. Z.

2010-12-01

The On the Cutting Edge professional development program for geoscience faculty has begun offering online workshops as a supplement to its face-to-face workshop series. Following a few initial forays since 2005, Cutting Edge launched a suite of four virtual workshops in 2010: Teaching Geoscience with Service Learning, Understanding the Deep Earth, Designing Effective and Innovative Courses in the Geosciences, and Teaching Geoscience Online. Each workshop was presented over 1-2 weeks and included pre-workshop web postings, synchronous whole-group presentations, live small-group discussions, asynchronous input via threaded discussions or editable web pages, and personal time for reflection and writing. Synchronous sessions were facilitated through the Elluminate software platform which includes tools for viewing presentations, screen sharing, real-time participant response, and an ongoing chat-room discussion. Audio was provided through a separate telephone conference service. In addition, many asynchronous conversations on workshop topics were held via a threaded discussion board on the Cutting Edge website and in Wiki-like, editable web pages designed to support collaborative work. A number of challenges to running online workshops exist, primarily involving participants’ time management. It is difficult for participants to set aside enough time to complete workshop activities when they are still enmeshed in their everyday lives. It also requires new skills for speakers, participants and support staff to prepare web-based materials and navigate the technology required for the online presentations. But there are also a number of opportunities presented by these experiences. With no travel needed, an online workshop is less expensive for participants, which allows Cutting Edge to extend its commitment to providing workshop materials to a wider audience of interested faculty. Also, synchronous sessions can be recorded and posted on the website for broader community

CEBAF/SURA 1985 Summer Workshop

International Nuclear Information System (INIS)

Crannel, H.

1985-12-01

The 1985 Summer Workshop began a new phase of planning for the experimental program at CEBAF. One goal of the Workshop was to define and describe options for equipping the CEBAF and stations with experimental equipment. Starting with an initial list of options which grew out of discussions during the Winter of 1984 and the Spring of 1985, the five working groups met during the Workshop and developed their final reports, included in these proceedings. The program of the Workshop consisted of invited talks on both theoretical and experimental topics, and working group meetings. The five working groups, include: Magnetic Spectrometers; Large Acceptance Detectors and Low Intensity Beams; Internal Targets; Positrons; Theory. These proceedings begin with an overview of CEBAF, and a report on progress made by the Magnetic Spectrometer and Internal Target Working Groups prior to the Workshop. The next part contains the invited talks, presented in the order which they were given during the week. The final reports of the five working groups follow this, and the proceedings conclude with papers contributed to the Workshop

How Effective is a Dental Workshop at Improving the Knowledge and Confidence of Medical Students in the Management of Dental Emergencies?

Directory of Open Access Journals (Sweden)

George R. Deeb

2016-01-01

Full Text Available The purpose of this study was to evaluate the effect of a three-hour hands-on workshop for medical students and residents on their pre- and postcourse knowledge and confidence in managing dental emergencies. A 1-hour lecture followed by four 20-minute “hands-on” skill stations on dental mannequins was administered to a group of 30 medical students and residents. Pre- and postworkshop questionnaire surveys were conducted. There was a significant increase in the percent of attendees who responded correctly to three of the four knowledge questions following the workshop ( P -value < 0.005. Confidence, as expressed in various statements, about treating dental emergencies was significantly improved after the lecture for eight of the nine statements. These findings indicate that dental knowledge is generally not provided during medical training. Our interactive workshop appeared to be effective in increasing this knowledge and self-reported confidence in handling dental emergencies. These findings clearly indicate the need for additional dental education during medical school. The use of a hands-on workshop may be one model for achieving this goal.

Geosciences Information for Teachers (GIFT) Workshops held in Conjunction with Alexander von Humboldt (AvH) EGU Conferences

Science.gov (United States)

Laj, Carlo; Cifelli, Francesca

2015-04-01

The Alexander von Humboldt Conference Series of the European Geosciences Union are a series of meetings held outside of Europe, in particular in South America, Africa or Asia, on selected topics of geosciences with a socio-economic impact for regions on these continents, jointly organised with the scientists and their institutes and the institutions of these regions. Given the increasing success of the GIFT workshops held in conjunction with the General Assemblies, since 2010 EGU has also developed a series of GIFT workshops held in conjunction with AvH conferences. Associated GIFT workshops were held in Merida, Yucatan, on the theme of Climate Change, Natural Hazards and Societies (March 2010), then in Penang, Malaysia (June 2011) on the theme of Ocean Acidification, in November 2012 in Cusco (Peru) on the theme of Natural Disasters, Global Change and the Preservation of World Heritage Sites, finally in Istanbul (March 2014) on "High Impact Natural Hazards Related to the Euro-Mediterranean Region. The next GIFT workshop is already planned for October 2015 in Adis Ababa (Ethiopia) on the theme "Water". In each case, the GIFT workshop was held on the last two days of the AvH conference and reunited 40-45 teachers from the nation where the AvH was held. Keynote speakers from AvH were speakers to the GIFT workshops which also included hands-on activities animated by sciences educators. These GIFT workshops represented the first workshops specifically aimed at teachers held in the country, and therefore represents a significant Earth Sciences contribution to secondary education in non European countries.

Twentieth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

None

1995-01-26

PREFACE The Twentieth Workshop on Geothermal Reservoir Engineering, dedicated to the memory of Professor Hank Ramey, was held at Stanford University on January 24-26, 1995. There were ninety-five registered participants. Participants came from six foreign countries: Japan, Mexico, England, Italy, New Zealand and Iceland. The performance of many geothermal reservoirs outside the United States was described in several of the papers. Professor Roland N. Horne opened the meeting and welcomed visitors to the campus. The key note speaker was Marshall Reed, who gave a brief overview of the Department of Energy's current plan. Thirty-two papers were presented in the technical sessions of the workshop. Technical papers were organized into eleven sessions concerning: field development, modeling, well tesubore, injection, geoscience, geochemistry and field operations. Session chairmen were major contributors to the workshop, and we thank: Ben Barker, Bob Fournier, Mark Walters, John Counsil, Marcelo Lippmann, Keshav Goyal, Joel Renner and Mike Shook. In addition to the technical sessions, a panel discussion was held on ''What have we learned in 20 years?'' Panel speakers included Patrick Muffler, George Frye, Alfred Truesdell and John Pritchett. The subject was further discussed by Subir Sanyal, who gave the post-dinner speech at the banquet. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank our students who operated the audiovisual equipment. Shaun D. Fitzgerald Program Manager

Introducing Chemical Reactions Concepts in K-6 through a Hands-On Food Spherification and Spaghetti-Fication Experiment

Science.gov (United States)

Gupta, Anju; Hill, Nicole; Valenzuela, Patricia; Johnson, Eric

2017-01-01

Recruiting students in STEM majors to fill the gap in STEM workforce is a continued challenge, which can be addressed by introducing scientific principles through hand-on activities to the students at an early stage. This paper presents the design, implementation and assessment of a chemistry-related workshop for sixth grade students that were…

Proceedings of 'workshop on Pb-alloy cooled fast reactor'

International Nuclear Information System (INIS)

Kim, Sang Ji; Kim, Yong Hee; Hong, Ser Gi

2003-06-01

The objective of 'Workshop on Pb-Alloy Cooled Fast Reactor', held in Taejeon, Korea on May 6, 2003, is to enhance the basic knowledge in this area by facilitating the exchange of information and discussions about problematic area of design aspects. There were five presentations from three different countries and about 25 participants gathered during the workshop. The topics covered in the workshop include benefits and drawbacks of Pb-alloy and Sodium coolant, two Pb-alloy cooled 900 MWt reactor designs using both B4C rods and NSTs, BREST-300 breakeven reactor and transmutation effectiveness of LLFPs in the typical thermal/fast neutron systems. The generic conclusion for the Pb-alloy cooled fast reactor from this workshop is as follows: 1) It has a potential to satisfy the goals established for the Generation-IV reactor concepts, so it has a bright future. 2) As a fast neutron system with a moderate breeding or a conversion, it is flexible in its roles and has superior safety characteristics over sodium coolant because of Pb-alloy's chemical inertness with water/air and high boiling temperature

Summary review of rock mechanics workshop on radioactive waste disposal

International Nuclear Information System (INIS)

Carter, N.L.; Goodman, R.E.; Merrill, R.H.

1977-01-01

Presentations, critiques and recommendations for the disposal of commercial radioactive waste based upon an analysis of the information presented at the Rock Mechanics Review/Workshop, Denver, Colorado, December 16-17, 1976 are summarized. The workshop, comprised of both formal and informal sessions, with about 50 participants, was hosted by RE/SPEC Inc. and Dr. Paul F. Gnirk, President and was sponsored by the Office of Waste Isolation (OWI), led by Dr. William C. McClain. The panel of reviewers, responsible for this report, consisted of Neville L. Carter, Richard E. Goodman, and Robert H. Merrill. These panel members were selected not only on the basis of their experience in various aspects of Rock Mechanics and Mining Engineering but also because they have had no previous active participation in problems concerning disposal of radioactive waste. By way of a general comment, the review panel was very favorably impressed with the Rock Mechanics research efforts, supported by OWI, on this problem and with the level of technical competence of those carrying out the research. Despite the rather preliminary nature of the results presented and the youth of the program itself, it is clear that the essential ingredients for a successful program are at hand, especially as regards disposal in natural salt formations. These include laboratory studies of appropriate rock deformation, numerical analyses of thermal and mechanical stresses around openings, and in situ field tests. We shall comment on each of these three major areas in turn. We shall then offer recommendations for their improvement, and, finally, we shall make more general recommendations for future considerations of the OWI radioactive waste disposal program

Waterloo Workshop on Computer Algebra

CERN Document Server

Zima, Eugene; WWCA-2016; Advances in computer algebra : in honour of Sergei Abramov's' 70th birthday

2018-01-01

This book discusses the latest advances in algorithms for symbolic summation, factorization, symbolic-numeric linear algebra and linear functional equations. It presents a collection of papers on original research topics from the Waterloo Workshop on Computer Algebra (WWCA-2016), a satellite workshop of the International Symposium on Symbolic and Algebraic Computation (ISSAC’2016), which was held at Wilfrid Laurier University (Waterloo, Ontario, Canada) on July 23–24, 2016.   This workshop and the resulting book celebrate the 70th birthday of Sergei Abramov (Dorodnicyn Computing Centre of the Russian Academy of Sciences, Moscow), whose highly regarded and inspirational contributions to symbolic methods have become a crucial benchmark of computer algebra and have been broadly adopted by many Computer Algebra systems.

International Workshop on Linear Colliders 2010

CERN Multimedia

CERN. Geneva

2010-01-01

IWLC2010 International Workshop on Linear Colliders 2010ECFA-CLIC-ILC joint meeting: Monday 18 October - Friday 22 October 2010Venue: CERN and CICG (International Conference Centre Geneva, Switzerland) This year, the International Workshop on Linear Colliders organized by the European Committee for Future Accelerators (ECFA) will study the physics, detectors and accelerator complex of a linear collider covering both CLIC and ILC options.Contact Workshop Secretariat  IWLC2010 is hosted by CERN

Workshop on establishing institutional credibility for SEAB Task Force on Radioactive Waste Management

International Nuclear Information System (INIS)

1994-01-01

At the request of the Secretary of Energy Advisory Board's Task Force on Civilian Radioactive Waste Management, the National Research Council sponsored a workshop on Establishing Institutional Credibility. The purpose of the workshop was to (1) identify the range of available knowledge regarding the theoretical and conceptual issues of how institutions establish their credibility and legitimacy with key constituents, and (2) to help explore and clarify fundamental concepts in management theory related to these issues. The examination was to include what is known about how organizations establish, maintain, lose, and regain public trust and confidence. There was to be no attempt to develop consensus on these issues or to suggest particular courses of action. The workshop was held on October 24-25, 1991, in Denver, Colorado

First Invenio Workshop: CERN’s digital library software ten years on

CERN Multimedia

Joannah Caborn Wengler

2012-01-01

To mark the release of Invenio 1.0, the first User Group Workshop was held last week, with more than 40 developers, system administrators and librarians from 14 different countries attending. The participants were able to catch up on developments in CERN’s digital library software and get a glimpse of where it's going next.   “This is the first time we’ve held such a big workshop,” explains Jean-Yves Le Meur, head of Digital Library Services. “There was a lot of demand for an event like this, and bringing out version 1.0 of Invenio was an obvious time to do it.” Ask him what’s new in version 1.0 and he opens his eyes wide. “There’s so much, it’s hard to summarise. One key improvement is that the code and the database are stable, well tested and optimised, which makes the software more efficient.” The participants, on the other hand, highlight new features coming up in Invenio...

Workshop meeting

International Nuclear Information System (INIS)

Veland, Oeystein

2004-04-01

1-2 September 2003 the Halden Project arranged a workshop on 'Innovative Human-System Interfaces and their Evaluation'. This topic is new in the HRP 2003-2005 programme, and it is important to get feedback from member organizations to the work that is being performed in Halden. It is also essential that relevant activities and experiences in this area from the member organizations are shared with the Halden staff and other HRP members. Altogether 25 persons attended the workshop. The workshop had a mixture of presentations and discussions, and was chaired by Dominique Pirus of EDF, France. Day one focused on the HRP/IFE activities on Human-System Interface design, including Function-oriented displays, Ecological Interface Design, Task-oriented displays, as well as work on innovative display solutions for the oil and gas domain. There were also presentations of relevant work in France, Japan and the Czech Republic. The main focus of day two was the verification and validation of human-system interfaces, with presentations of work at HRP on Human-Centered Validation, Criteria-Based System Validation, and Control Room Verification and Validation. The chairman concluded that it was a successful workshop, although one could have had more time for discussions. The Halden Project got valuable feedback and viewpoints on this new topic during the workshop, and will consider all recommendations related to the future work in this area. (Author)

The Hands-On Universe: Making Sense of the Universe with All Your Senses

Science.gov (United States)

Trotta, R.

2018-02-01

For the past four years, the Hands-On Universe public engagement programme has explored unconventional, interactive and multi-sensorial ways of communicating complex ideas in cosmology and astrophysics to a wide variety of audiences. The programme lead, Roberto Trotta, has reached thousands of people through food-based workshops, art and science collaborations and a book written using only the 1000 most common words in the English language. In this article, Roberto reflects in first person on what has worked well in the programme, and what has not.

Report of the workshop on polarized target materials

International Nuclear Information System (INIS)

Court, G.R.; Crabb, D.G.; Fernow, R.C.; Fitzgerald, D.H.; Gray, S.W.; Hill, D.A.; Jarmer, J.J.; Krisch, A.D.; Krumpolic, M.; Niinikoski, T.O.

1978-01-01

The workshop concentrated on an examination of: radiation damage in polarized target materials, a survey of clean target materials, and dynamic polarization results with the new stable Cr(V) complexes. In addition to the normal polarized target experts with backgrounds in high energy physics, low temperature physics and solid state physics, scientists with strong backgrounds in various areas of chemistry and radiation damage physics were included, as these areas were quite crucial to the workshop goals. However, it is clear that much closer collaboration with experts in these areas will be necessary to find polarized target materials that allow more precise experiments on high P 2 perpendicular processes and inclusive processes

Proceedings of the workshop 'Absorbed dose in water and air'

International Nuclear Information System (INIS)

Rapp, Benjamin; Bordy, Jean-Marc; Camacho Caldeira, Margarida Isabela; Sochor, Vladimir; Celarel, Aurelia; Cenusa, Constentin; Cenusa, Ioan; Donois, Marc; Dusciac, Dorin; Iliescu, Elena; Ostrowsky, Aime; Bercea, Sorin; Blideanu, Valentin; Bordy, Jean-Marc; Steurer, Andrea; Tiefenboeck, Wilhelm

2017-05-01

The project 'Absorbed dose in water and air' (Absorb) is aimed at sharing and improving the knowledge on the design of Primary Standards (calorimeter, cavity ionization chambers, free air ionization chambers) for 'dose' measurements in radiation therapy and diagnostic, the harmonization of calibration procedures, the determination of uncertainty and harmonization of uncertainty budgets. Within the framework of this project a workshop was organized at the LNE (Laboratoire National de metrologie et d'Essais) in Paris from February, 29 to March, 2 2016. This report is the proceeding of this workshop. It includes a state of the art of two bilateral collaborations, launched to go beyond the framework of Absorb, between CEA LIST (LNE) LNHB and in one hand IFIN-HH (Romania), and in the other hand IST-LPSR-LMRI (Portugal) to build primary cavity ionization chambers for photons emitted by cobalt-60 and Cesium-137. Absorb is a Joint Research Project of the European Metrology Programme for Innovation and Research (EMPIR) which is co-funded by the European Union's Horizon 2020 research and innovation programme and the EMPIR Participating States

The 13th international workshop on targetry and target chemistry proceedings

Energy Technology Data Exchange (ETDEWEB)

Haroun, S. (SFU, TRIUMF (Canada)); Givskov, A.; Jensen, Mikael (Technical Univ. of Denmark. Risoe National Laboratory for Sustainable Energy, Radiation Research Division, Roskilde (Denmark))

2011-06-15

This report contains the complete proceedings of the 13th International Workshop on Targetry and Target Chemistry. The Workshop was held at Risoe National Laboratory for Sustainable Energy on July 26-28 2010. The workshop deals with the development of methods and systems for efficient production of radioactive isotopes with accelerators. The WTTC series of workshops was initiated for the purpose of exchanging information about the problems and solutions associated with the production of radioisotopes for biomedical research and their applications to the diagnosis and treatment of disease. The goal of the WTTC is to advance the science associated with radioisotope production targetry. The Workshops are designed to bring experienced targetry scientists together with newcomers to the field, both from industry and academia, to discuss issues of targetry and target chemistry and approaches to exploring in situ target chemistry and the engineering required to optimize production yields. In the workshop, experience, ideas and information are freely and openly shared; learning and collaborations are fostered, with active participation by all attendees. This participation includes both formal and informal sessions. The present proceedings captures both submitted abstracts and the actual presentations showed during the very successful workshop meeting number 13 in the row, the WTTC13. (Author)

The 13th international workshop on targetry and target chemistry proceedings

International Nuclear Information System (INIS)

Haroun, S.; Givskov, A.; Jensen, Mikael

2011-06-01

This report contains the complete proceedings of the 13th International Workshop on Targetry and Target Chemistry. The Workshop was held at Risoe National Laboratory for Sustainable Energy on July 26-28 2010. The workshop deals with the development of methods and systems for efficient production of radioactive isotopes with accelerators. The WTTC series of workshops was initiated for the purpose of exchanging information about the problems and solutions associated with the production of radioisotopes for biomedical research and their applications to the diagnosis and treatment of disease. The goal of the WTTC is to advance the science associated with radioisotope production targetry. The Workshops are designed to bring experienced targetry scientists together with newcomers to the field, both from industry and academia, to discuss issues of targetry and target chemistry and approaches to exploring in situ target chemistry and the engineering required to optimize production yields. In the workshop, experience, ideas and information are freely and openly shared; learning and collaborations are fostered, with active participation by all attendees. This participation includes both formal and informal sessions. The present proceedings captures both submitted abstracts and the actual presentations showed during the very successful workshop meeting number 13 in the row, the WTTC13. (Author)

Report of planning workshop on fluctuations and anomalous transport in tokamaks

Energy Technology Data Exchange (ETDEWEB)

1982-10-01

The workshop was divided into three sections: review of experiments on fluctuations in tokamaks, review of theories of anomalous transport, and discussion of directions for future research and experimental/theoretical collaboration. Each session was assigned a recording secretary to take notes which were used in preparing this report. The report includes the activities, conclusions, and recommendations of the workshop.

Report of planning workshop on fluctuations and anomalous transport in tokamaks

International Nuclear Information System (INIS)

1982-10-01

The workshop was divided into three sections: review of experiments on fluctuations in tokamaks, review of theories of anomalous transport, and discussion of directions for future research and experimental/theoretical collaboration. Each session was assigned a recording secretary to take notes which were used in preparing this report. The report includes the activities, conclusions, and recommendations of the workshop

Hand hygiene in reducing transient flora on the hands of healthcare workers: an educational intervention.

Science.gov (United States)

Kapil, R; Bhavsar, H K; Madan, M

2015-01-01

Hand hygiene has now been recognised as one of the most effective intervention to control the transmission of infections in a hospital and education is an important tool to ensure its implementation. In order to convince the users and as a part of education, it is important to generate evidence on the role of hand hygiene in reducing the bacterial flora on their hands. The present study was undertaken in a tertiary care hospital to demonstrate the presence of bacterial flora on the hands of healthcare workers (HCW) in different categories, to teach them proper hand hygiene technique using alcohol-based hand rub and determine the outcome for reduction of bacteria. A total sample size of 60 subjects including resident doctors, medical students, nurses and hospital attendants were included in the study after obtaining informed consent. Each person was educated on the technique of hand hygiene with alcohol-based hand rub and hand impressions were cultured before and after hand hygiene. All the subjects were also given a questionnaire to assess their perception on hand hygiene. The WHO posters on proper hand hygiene were displayed in the appropriate areas of the hospital in addition, as an educational tool. Majority (42 out of 60) of the HCWs had bacterial count up to 100 colonies or more on both hands before the application of hand rub while working in the hospital. After use of alcohol hand rub with a proper hand hygiene technique, it was found that the percentage reduction was 95-99% among doctors and nurses, 70% among hospital attendants and 50% among sanitary attendants. Staphylococcus aureus was present on the hands of eight persons of which three were methicillin-resistant Staphylococcus aureus. The study demonstrates that transient bacteria are present on the hands of HCWs but majority could be removed by proper hand hygiene, which needs continuous education to be effective. It also shows that active education by demonstrating the proper hand hygiene technique

Report on the Joint EU-US Workshop on Microbial Community Dynamics: Cooperation and Competition

Energy Technology Data Exchange (ETDEWEB)

Wall, Judy D. [Univ. of Missouri, Columbia, MO (United States)

2013-07-01

The European Commission (EC)-United States (US) Task Force on Biotechnology Research has a longstanding joint Working Group on Biotechnology for the Environment whose mission is to foster collaborations between researchers in the European Union (EU) and US in the field of environmental biotechnology. A special focus of the Working Group is to increase scientific interchange between early career scientists in the US and EU. Such interactions initiate a foundation of respect and trust needed to develop long-term collaborations. In order to realize the full potential for the application of modern technologies to obtain a sustainable biosphere, it is vital to create conduits for knowledge exchange among scientists worldwide engaged in environmental microbial biotechnology research. Since its formation in 1994, the Working Group has organized many activities for early career scientists designed to promote this scientific exchange, including two week courses with hands-on research experience, intensive workshops of two or three days, and research scholar exchanges of one to six months. These interactions are focused on environmental problems that respect no international boundaries.

A Report on the Children's Program Workshop.

Science.gov (United States)

Valleau, Emily Hearn; Baril, Michele

This collection of speech summaries, workshop findings, and panel and discussion texts given by a total of 23 producers, programmers, performers, researchers, and writers, focuses on Canadian children's television. Introductory remarks by Nan-B. de Gaspe Beaubien are included with summaries of presentations by Sam Rabinovitch, James Dormeyer, Bob…

Special workshop on lung dosimetry

International Nuclear Information System (INIS)

Fisher, D.R.

1983-01-01

A Special Workshop on Lung Dosimetry was convened in Salt Lake City, Utah, on April 21-22, 1982, to stimulate the use of improved radiation dosimetry and to formulate a stronger basis for dose-response relationships for inhaled radionuclides. The two-day workshop was held in conjunction with the 30th Annual Meeting of the Radiation Research Society. Publication is planned

22nd Italian Workshop on Neural Nets

CERN Document Server

Bassis, Simone; Esposito, Anna; Morabito, Francesco

2013-01-01

This volume collects a selection of contributions which has been presented at the 22nd Italian Workshop on Neural Networks, the yearly meeting of the Italian Society for Neural Networks (SIREN). The conference was held in Italy, Vietri sul Mare (Salerno), during May 17-19, 2012. The annual meeting of SIREN is sponsored by International Neural Network Society (INNS), European Neural Network Society (ENNS) and IEEE Computational Intelligence Society (CIS). The book – as well as the workshop-  is organized in three main components, two special sessions and a group of regular sessions featuring different aspects and point of views of artificial neural networks and natural intelligence, also including applications of present compelling interest.

2nd U.S.-Australia Workshop on Renewable Resource Management

CERN Document Server

Cohen, Yosef; Grantham, Walter; Kirkwood, Geoffrey; Skowronski, Jan

1987-01-01

This vol ume contains the proceedings of the second U. S. -Austral ia workshop on Renewable Resource Management held at the East-West Center, Honolulu, Hawaii, December 9-12, 1985. The workshop was jointly sponsored by the National Science Foundation (USA) and the Department of Science and Technology (Austral ia) under the U. S. -Austral ia Cooperative Science Program. The objective of the workshop was to focus on problems associated with the management of renewable resource systems. A particular emphasis was given to methods for handling uncertain elements whieh are present in any real system. Toward this end, the partiei pants were chosen so that the collective expertise included mathematical modeling, dynamical control/game theory, ecology, and practical management of real systems. Each participant was invited to give an informal presentation in his field of expertise as related to the overall theme. The formal papers (contained in this vo 1 ume) were written after the workshop so that the authors coul d u...

Math in Action. Hands-On, Minds-On Math.

Science.gov (United States)

Waite-Stupiansky, Sandra; Stupiansky, Nicholas G.

1998-01-01

Hands-on math must also involve students' minds in creative thinking. Math manipulatives must be used for uncovering, not just discovering. This paper presents guidelines for planning hands-on, minds-on math for elementary students. Suggestions include dialoging, questioning, integrating manipulatives and other tools, writing, and evaluating. (SM)

Proceedings of the Department of Energy workshop on Workplace Aerosol Monitoring

Energy Technology Data Exchange (ETDEWEB)

Kenoyer, J. L.; Vallario, E. J.; Murphy, B. L.

1987-02-01

The workshop on Workshop Aerosol Monitoring was held October 28-30, 1985 in Napa, California and was sponsored by the US Department of Energy, Radiological Controls Division. This workshop brought together participants from the United States, England, France, and West Germany who represented government, research, and industry. The participants discussed the types of air sampling and air monitoring instrumentation that are currently being developed, the problems that need to be addressed in order to obtain ''representative'' samples, and the need for a lower minimum detectable activity to protect the worker from inhalation of radionuclides in a timely manner. This proceedings includes papers and speeches that were presented at the workshop, plus edited transcripts of panel and open discussions, and question and answer sessions.

Ninth International Workshop on Plant Membrane Biology

Energy Technology Data Exchange (ETDEWEB)

1993-12-31

This report is a compilation of abstracts from papers which were discussed at a workshop on plant membrane biology. Topics include: plasma membrane ATP-ases; plant-environment interactions, membrane receptors; signal transduction; ion channel physiology; biophysics and molecular biology; vaculor H+ pumps; sugar carriers; membrane transport; and cellular structure and function.

Summary Report of the INL-JISEA Workshop on Nuclear Hybrid Energy Systems

Energy Technology Data Exchange (ETDEWEB)

Antkowiak, M.; Ruth, M.; Boardman, R.; Bragg-Sitton, S.; Cherry, R.; Shunn, L.

2012-07-01

The Institute for Nuclear Energy Science and Technology (INEST) and the Joint Institute for Strategic Energy Analysis (JISEA) co-sponsored an international workshop to identify research topics important in advancing the potential use of hybrid systems with a specific focus on nuclear-renewable hybrid systems. The workshop included presentations ranging from energy challenges and research and development directions being pursued by nations to multiple options for hybrid systems. Those options include one that is being commercialized to other opportunities and analysis results quantifying them. The workshop also involved two breakout sessions--one focused on thermal energy management issues especially at unit-operation scale and the second focused on system operations issues including system controls, regulatory issues, technical and economic analysis, and market challenges. A discussion involving the full group focused on more general issues such as societal involvement and participation. Key criteria for selecting hybrid energy system projects and metrics for comparing them were also identified by the full group.

Network workshop

DEFF Research Database (Denmark)

Bruun, Jesper; Evans, Robert Harry

2014-01-01

This paper describes the background for, realisation of and author reflections on a network workshop held at ESERA2013. As a new research area in science education, networks offer a unique opportunity to visualise and find patterns and relationships in complicated social or academic network data....... These include student relations and interactions and epistemic and linguistic networks of words, concepts and actions. Network methodology has already found use in science education research. However, while networks hold the potential for new insights, they have not yet found wide use in the science education...... research community. With this workshop, participants were offered a way into network science based on authentic educational research data. The workshop was constructed as an inquiry lesson with emphasis on user autonomy. Learning activities had participants choose to work with one of two cases of networks...

Proceedings of the Japan-U.S. workshop P-118 on vacuum technologies for fusion devices

International Nuclear Information System (INIS)

Miyahara, A.

1989-01-01

Fusion community does not appreciate vacuum technologies to the same extent as accelerator community does. This is because, in the case of accelerators, in particular storage ring systems, the requirement of attaining ultrahigh vacuum in order to avoid collisional loss is well defined, on the other hand, it is not possible to define the requirement so precisely in the case of fusion devices. One of the reasons is that core plasma interacts with vessel wall so strongly and unpredictably that it becomes difficult to identify the role played by individual components. However, in the next step and the next generation machines like CIT, LHS, ITER, FER and NET, vacuum technologies would play more significant roles, because the CIT will introduce tritium in a vacuum vessel, and the aim of the ITER project is to demonstrate particle balance, namely, to achieve steady state operation with D-T fuel. The Japan-U.S. workshop P-118 was held at the Institute of Plasma Physics, Nagoya University, from August 1 to 5, 1988. 33 participants including 4 from the U.S. took part in the workshop. In the plenary session, 12 lectures were given, and also the topics-oriented session on pumping, gauging, remote maintenance, first wall, pump limiter, divertor and others was held. (K.I.)

Workshop on materials control and accounting system design

International Nuclear Information System (INIS)

Pillay, K.K.S.

1989-01-01

The chapter describes the workshop aimed at reinforcing, through participation in the design exercise, the concepts of nuclear materials control and accountability. Topics include: workshop format; key elements of a materials management and accounting (MC and A) system; and MC and A system design including safeguards organization and management, material access areas, key measurement points, nuclear materials measurements, physical inventory, material balance closings, and internal controls. Appended to this chapter is a detailed description of a facility that produces metallic plutonium and the safeguards requirements for this facility

A Model for Local Experiential Learning: Teacher Workshop on Mangroves, Oceans & Climate in Kosrae

Science.gov (United States)

Maloney, A. E.; Sachs, J. P.; Barros, C.; Low, M.

2016-02-01

A curriculum for an intensive one-day workshop about mangroves, oceans, and climate has been developed for school teachers in the Federated States of Micronesia. The goals of the workshop are for teachers/attendees to be able to (i) explain what salinity is and describe how it varies from the ocean to the river, (ii) explain what a mangrove is and describe adaptations mangroves have developed that allow them to live in saline or brackish water and adjust to changing sea level, and (iii) develop a grade-appropriate poster on mangroves or salinity and one interactive activity that uses the poster to engage students in learning. These objectives are accomplished by field trips to the ocean and mangrove swamp, where each participant learns how to measure salinity and identify mangrove species. The hands-on field component is followed by a poster development session where participants design, present, and share feedback on their posters that they will bring back to their classrooms. This experience allows schoolteachers to intimately explore their coastal ecosystems and gain new perspectives about their environment that they can take back to their students. The workshop was designed through a collaborative effort between Pacific Resources for Education and Learning (PREL) NSF Pacific Climate Education Partnership, University of Washington professors, graduate students and undergraduate students, Kosrae Department of Education, Kosrae Island Resource Management Authority (KIRMA), Kosrae Island Conservation and Safety Organization (KCSO), and local Kosraean schoolteachers and administrators. The workshop was offered to elementary school teachers from 4 of 5 school districts in 2013, 2014, and 2015, led by University of Washington scientists and PREL. Local education officials and PREL staff will lead future workshops.

Report of the workshop on Climate Sensitivity

International Nuclear Information System (INIS)

2004-01-01

The IPCC Working Group I (WGI) held this Workshop on Climate Sensitivity as a major keystone in activities preparing for the WGI contribution to the IPCC Fourth Assessment Report (AR4). One of the most important parameters in climate science is the 'climate sensitivity', broadly defined as the global mean temperature change for a given forcing, often that of a doubling of atmospheric carbon dioxide. Climate sensitivity has played a central role throughout the history of IPCC in interpretation of model outputs, in evaluation of future climate changes expected from various scenarios, and it is closely linked to attribution of currently observed climate changes. An ongoing challenge to models and to climate projections has been to better define this key parameter, and to understand the differences in computed values between various models. Throughout the last three IPCC assessments the climate sensitivity has been estimated as being in the range 1.5 to 4.5 deg. C for CO 2 doubling (i.e., uncertain by a factor of three), making this parameter central to discussions of uncertainty in climate change. The aims of the workshop were to: - Evaluate a range of climate model results so as to relate different climate sensitivity estimates to differences descriptions of physical processes, particularly those related to atmospheric water vapor, clouds, lapse rate changes, ocean heat uptake, treatment of evapotranspiration, land-atmosphere coupling, etc.; - Obtain a more comprehensive picture of the relationships between climate sensitivity and other model features such as resolution, numerical approach, radiative transfer parameters, etc.; - Consider how current, historical, and paleo-climatic data can aid in the determination of the likely range of climate sensitivity; - Improve the understanding of the interpretation and limits of the climate sensitivity concept, including for example possible dependencies upon different forcing agents, predictability questions, and transient

Next-generation sequencing: a challenge to meet the increasing demand for training workshops in Australia.

Science.gov (United States)

Watson-Haigh, Nathan S; Shang, Catherine A; Haimel, Matthias; Kostadima, Myrto; Loos, Remco; Deshpande, Nandan; Duesing, Konsta; Li, Xi; McGrath, Annette; McWilliam, Sean; Michnowicz, Simon; Moolhuijzen, Paula; Quenette, Steve; Revote, Jerico Nico De Leon; Tyagi, Sonika; Schneider, Maria V

2013-09-01

The widespread adoption of high-throughput next-generation sequencing (NGS) technology among the Australian life science research community is highlighting an urgent need to up-skill biologists in tools required for handling and analysing their NGS data. There is currently a shortage of cutting-edge bioinformatics training courses in Australia as a consequence of a scarcity of skilled trainers with time and funding to develop and deliver training courses. To address this, a consortium of Australian research organizations, including Bioplatforms Australia, the Commonwealth Scientific and Industrial Research Organisation and the Australian Bioinformatics Network, have been collaborating with EMBL-EBI training team. A group of Australian bioinformaticians attended the train-the-trainer workshop to improve training skills in developing and delivering bioinformatics workshop curriculum. A 2-day NGS workshop was jointly developed to provide hands-on knowledge and understanding of typical NGS data analysis workflows. The road show-style workshop was successfully delivered at five geographically distant venues in Australia using the newly established Australian NeCTAR Research Cloud. We highlight the challenges we had to overcome at different stages from design to delivery, including the establishment of an Australian bioinformatics training network and the computing infrastructure and resource development. A virtual machine image, workshop materials and scripts for configuring a machine with workshop contents have all been made available under a Creative Commons Attribution 3.0 Unported License. This means participants continue to have convenient access to an environment they had become familiar and bioinformatics trainers are able to access and reuse these resources.

Introduction to workshop on radiation effects in nuclear waste materials

International Nuclear Information System (INIS)

Matzke, H.

1988-01-01

The workshop consisted of an invited lecture for REI-4, treating radiation damage in nuclear fuels as well as giving an introduction to the field of damage in waste matrices, of invited and contributed lectures to the workshop and to REI as well as of discussions and round table meetings. The contributions available as manuscripts are included on the following pages of these proceedings. At the end, a short summary with recommendations for future work has been added. It is hoped that the stimulating discussions of the workshop will help to continue the work in the field of radiation effects in waste matrices in an effective way. The organizer believes that there are good reasons for this hope and he thanks all scientists who contributed to the success of the workshop, as well as members of the organizing committee of REI-4 for their help. (orig.)

Workshop on confidence limits. Proceedings

International Nuclear Information System (INIS)

James, F.; Lyons, L.; Perrin, Y.

2000-01-01

The First Workshop on Confidence Limits was held at CERN on 17-18 January 2000. It was devoted to the problem of setting confidence limits in difficult cases: number of observed events is small or zero, background is larger than signal, background not well known, and measurements near a physical boundary. Among the many examples in high-energy physics are searches for the Higgs, searches for neutrino oscillations, B s mixing, SUSY, compositeness, neutrino masses, and dark matter. Several different methods are on the market: the CL s methods used by the LEP Higgs searches; Bayesian methods; Feldman-Cousins and modifications thereof; empirical and combined methods. The Workshop generated considerable interest, and attendance was finally limited by the seating capacity of the CERN Council Chamber where all the sessions took place. These proceedings contain all the papers presented, as well as the full text of the discussions after each paper and of course the last session which was a discussion session. The list of participants and the 'required reading', which was expected to be part of the prior knowledge of all participants, are also included. (orig.)

Workshop on translating Science to Clinics and Market

OpenAIRE

Editor

2016-01-01

The workshop on translating technology is directed to senior industry leaders High tech entrepreneurs Scientists from academia and industry Clinical researchers and Venture capitalists. The event will cover various topics including startup success stories 19 inspiring showcases about advanced drug delivery systems.

Proceedings of the fifth workshop on containment integrity

Energy Technology Data Exchange (ETDEWEB)

Parks, M.B.; Hughey, C.E. [eds.] [Sandia National Labs., Albuquerque, NM (United States)

1992-07-01

The Fifth Workshop on Containment integrity was held in Washington, DC, on May 12--14, 1992. The purpose of these workshops is to provide an international forum for the exchange of information on performance of containments in nuclear power plants under severe accident loadings. Severe accident investigations of existing containment designs as well as future advanced containments were presented during the workshop. There were 145 participants at the workshop from 15 countries. Individual papers have been cataloged separately.

Report of the workshop on rf heating in mirror systems

International Nuclear Information System (INIS)

Price, R.E.; Woo, J.T.

1980-08-01

This report is prepared from the proceedings of the Workshop on RF Heating in Magnetic Mirror Systems held at DOE Headquarters in Washington, DC, on March 10-12, 1980. The workshop was organized into four consecutive half-day sessions of prepared talks and one half-day discussion. The first session on tandem mirror concepts and program plans served to identify the opportunities for the application of rf power and the specific approaches that are being pursued. A summary of the ideas presented in this session is given. The following sessions of the workshop were devoted to an exposition of current theoretical and experimental knowledge on the interaction of rf power with magnetically confined, dense, high temperature plasmas at frequencies near the electron cyclotron resonance, lower hybrid resonance and ion cyclotron resonance (including magnetosonic) ranges. The conclusions from these proceedings are presented

The proceedings of 1993-workshop on 'development and application of facilities for low temperature irradiation as well as controlled irradiation'

International Nuclear Information System (INIS)

Kuramoto, Eiichi; Okada, Moritami

1993-03-01

This is the proceedings of 1992-workshop of the working group on 'Development and Application of Facilities for Low Temperature Irradiation as well as Controlled Irradiation' held at the Research Reactor Institute of Kyoto University on February 23 and 24, 1993. In this workshop until now, studies on irradiation effects in many materials irradiated at lower and higher temperatures have been reported. It has been clearly defined that a careful choice of irradiation conditions is most important. At the present time, a setting plan of exactly controlled irradiation facility, which is able to irradiate with higher temperatures, is in progress. On the other hand, a plan of vertical low temperature irradiation facility has not yet been performed for lack of funds. In last year, a middle scale plan of low temperature irradiation facility, which is possible to irradiate a fast-neutron dose above 10 17 n/cm 2 at about 5K, was proposed in this workshop. In this proceedings, the advanced facility is required to construct to the KUR as soon as possible by many of the workshop members. (author)

6th International Workshop on Computer-Aided Scheduling of Public Transport

CERN Document Server

Branco, Isabel; Paixão, José

1995-01-01

This proceedings volume consists of papers presented at the Sixth International Workshop on Computer-Aided Scheduling of Public Transpon, which was held at the Fund~lio Calouste Gulbenkian in Lisbon from July 6th to 9th, 1993. In the tradition of alternating Workshops between North America and Europe - Chicago (1975), Leeds (1980), Montreal (1983), Hamburg (1987) and again Montreal (1990), the European city of Lisbon was selected as the venue for the Workshop in 1993. As in earlier Workshops, the central theme dealt with vehicle and duty scheduling problems and the employment of operations-research-based software systems for operational planning in public transport. However, as was initiated in Hamburg in 1987, the scope of this Workshop was broadened to include topics in related fields. This fundamental alteration was an inevitable consequence of the growing demand over the last decade for solutions to the complete planning process in public transport through integrated systems. Therefore, the program of thi...

Leadership Workshops for Adult Girl Scout Leaders

Science.gov (United States)

Lebofsky, Larry A.; McCarthy, Donald; DeVore, Edna; Harman, Pamela; Reaching Stars Team

2016-10-01

This year, the University of Arizona is conducting its first two Leadership Workshops for Girl Scout adult leaders. These workshops are being supported by a five-year NASA Collaborative Agreement, Reaching for the Stars: NASA Science for Girl Scouts (www.seti.org/GirlScoutStars), through the SETI Institute in collaboration with the University of Arizona, Girl Scouts of the USA (GSUSA), the Girl Scouts of Northern California, the Astronomical Society of the Pacific, and Aries Scientific, Inc. These workshops are an outgrowth of Astronomy Camp for Girl Scout Leaders, a 14-year "Train the Trainer" program funded by NASA through the James Webb Space Telescope's Near Infrared Camera (NIRCam) education and outreach team. We are continuing our long-term relationship with all Girl Scout Councils to engage girls and young women not only in science and math education, but also in the astronomical and technological concepts relating to NASA's scientific mission. Our training aligns with the GSUSA Journey: It's Your Planet-Love It! and introduces participants to some of the activities that are being developed by the Girl Scout Stars team for GSUSA's new space science badges for all Girl Scout levels being developed as a part of Reaching for the Stars: NASA Science for Girl Scouts.The workshops include hands-on activities in basic astronomy (night sky, stars, galaxies, optics, telescopes, etc.) as well as some more advanced concepts such as lookback time and the expansion of the Universe. Since the inception of our original Astronomy Camp in 2003, our team has grown to include nearly 280 adult leaders, staff, and volunteers from over 79 Councils in 43 states and the District of Columbia so they can, in turn, teach young women essential concepts in astronomy, the night sky environment, applied math, and engineering. Our workshops model what astronomers do by engaging participants in the process of science inquiry, while equipping adults to host astronomy-related programs with

9th Workshop on Stochastic Analysis and Related Topics

CERN Document Server

Decreusefond, Laurent; Stochastic Analysis and Related Topics

2012-01-01

Since the early eighties, Ali Suleyman Ustunel has been one of the main contributors to the field of Malliavin calculus. In a workshop held in Paris, June 2010 several prominent researchers gave exciting talks in honor of his 60th birthday. The present volume includes scientific contributions from this workshop. Probability theory is first and foremost aimed at solving real-life problems containing randomness. Markov processes are one of the key tools for modeling that plays a vital part concerning such problems. Contributions on inventory control, mutation-selection in genetics and public-pri

Developing an Educational Workshop on Teen Depression and Suicide: A Proactive Community Intervention.

Science.gov (United States)

McArt, Ebba W.; Shulman, Donald A.; Gajary, Elizabeth

1999-01-01

An educational workshop was developed in Monroe County, New York on teen depression and suicide. The workshop used a proactive, preventive-educational approach, including both primary and secondary prevention modalities, directly available to teens, parents, and youth professionals. The program subsequently developed new partnerships between…

16th Workshop on High Energy Spin Physics

CERN Document Server

2016-01-01

The Workshop will cover a wide range of spin phenomena at high and intermediate energies such as: recent experimental data on spin physics the nucleon spin structure and GPD's spin physics and QCD spin physics in the Standard Model and beyond T-odd spin effects polarization and heavy ion physics spin in gravity and astrophysics the future spin physics facilities spin physics at NICA polarimeters for high energy polarized beams acceleration and storage of polarized beams the new polarization technology related subjects The Workshop will be held in the Bogoliubov Laboratory of Theoretical Physics of the Joint Institute for Nuclear Research, 141980 Dubna, Moscow Region, Russia. The program of the workshop will include plenary and parallel (if necessary) sessions. Plenary sessions will be held in the Conference Hall. Parallel sections will take place in the same building. There will be invited talks (up to 40 min) and original reports (20 min). The invited speakers will present new experimental and theoretical re...

13th International Workshop on Condensed Matter Theories

CERN Document Server

1990-01-01

This volume gathers the invited talks of the XIII International Work­ shop on Condensed Matter Theories which took place in Campos do Jordao near Sao Paulo, Brazil, August 6-12, 1989. It contains contributions in a wide variety of fields including neutral quantum and classical fluids, electronic systems, composite materials, plasmas, atoms, molecules and nuclei, and as this year's workshop reflected the natural preoccupation in materials science with its spectacular prospect for mankind, room tempera­ ture super-conductivity. All topics are treated from a common viewpoint: that of many-body physics, whether theoretical or simu1ational. Since the very first workshop, held at the prestigious Instituto de Fisica Teorica in Sao Paulo, and organized by the same organizer of the 1989 workshop, Professor Valdir Casaca Aguilera-Navarro, the meeting has taken place annually six times in Latin America, four in Europe and three in the United States. Its principal objective has been to innitiate and nurture collaborati...

Workshop on the Suborbital Science Sounding Rocket Program, Volume 1

Science.gov (United States)

1991-01-01

The unique characteristics of the sounding rocket program is described, with its importance to space science stressed, especially in providing UARS correlative measurements. The program provided opportunities to do innovative scientific studies in regions not other wise accessible; it was a testbed for developing new technologies; and its key attributes were flexibility, reliability, and economy. The proceedings of the workshop are presented in viewgraph form, including the objectives of the workshop and the workshop agenda.

Instructional Styles, Attitudes and Experiences of Seniors in Computer Workshops

Science.gov (United States)

Wood, Eileen; Lanuza, Catherine; Baciu, Iuliana; MacKenzie, Meagan; Nosko, Amanda

2010-01-01

Sixty-four seniors were introduced to computers through a series of five weekly workshops. Participants were given instruction followed by hands-on experience for topics related to social communication, information seeking, games, and word processing and were observed to determine their preferences for instructional support. Observations of…

The second international workshop on enterprise security

OpenAIRE

Chang, V; Ramachandran, M; Yen, NN; Walters, RJ; Wills, G

2016-01-01

Welcome to our second international workshop on Enterprise Security as part of CloudCom 2015, Vancouver, Canada, November 30-December 3, 2015. The first international workshop held in Singapore has been a major success since then we have achieved greater team activities, research, and international collaborations as the major and significant outcome of our first workshop on this topic. Enterprise Security involves all business, products, governments, organization, and their contractors. This ...

6th Workshop on waste management contracts

International Nuclear Information System (INIS)

2000-01-01

The workshop was intended for participants from industry and the service sector and municipalities responsible in particular for the legal aspects involved in the waste management business, namely for concluding the contracts with customers and contractors and for contract management in compliance with the laws and regulations of Germany and the European Union, including the relevant pollution control and monitoring obligations. Participants of the workshop received in-depth information and guidance through discussion of contracts and document types of relevance in this context. (orig./CB) [de

Proceedings: Joint DOE/NSF Workshop on flow of particulates and fluids

Energy Technology Data Exchange (ETDEWEB)

1993-12-31

These proceedings are the result of the Fifth DOR-NSF Workshop on fundamental research in the area of particulate two-phase flow and granular flow. The present collection of twenty contributions from universities and national laboratories is based on research projects sponsored by either the Department of Energy or the National Science Foundation. These papers illustrate some of the latest advances in theory, simulations, and experiments. The papers from the Workshop held September 29--October 1, 1993 have been separated into three basic areas: experiments, theory, and numerical simulations. A list of attendees at the workshop is included at the end of the proceedings. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

EDITORIAL: 15th European Workshop on Micromechanics (MME)

Science.gov (United States)

Puers, Bob

2005-07-01

so, without doubt, such a selection was not an easy task to perform. A careful choice was made by the Programme Committee of the MME Workshop at first, followed by the regular reviewing procedure at the heart of IOP Publishing. I am proud to be able to present to you this collection of 23 papers. We decided also to include papers dealing with non-lithography based manufacturing techniques in this special issue, in an attempt to widen the scope. With this special issue we hope to give you a good overview of the topics dealt with in this workshop. It goes without saying that all the above was not possible without the individual contributions of all the authors. I owe them much gratitude. Gathered here are contributions of an excellent scientific quality, reflecting a clear up-to-date image of what is going on in Europe in this field. I also wish to extend my thanks to the editorial staff of Journal of Micromechanics and Microengineering. Collaboration with them turns work into pleasure. I wish you a pleasant reading.

Workshop on accelerator magnet superconductors. Proceedings

International Nuclear Information System (INIS)

2004-01-01

The workshop on accelerator magnet superconductors has gathered 102 registered participants from research laboratories, universities and industry. 8 European companies, active in superconducting materials and cables were present. This workshop has been organized to deal with the status of the world research and development on superconducting materials and cables for high field magnets (B > 10 T). The workshop has also reviewed the status of high temperature superconductors and transmission line cables for potential use in low field superconducting magnets for injectors and beam transfer lines, as well as cables for pulsed magnets that might be used in future hadron colliders or injectors

Workshop on accelerator magnet superconductors. Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

The workshop on accelerator magnet superconductors has gathered 102 registered participants from research laboratories, universities and industry. 8 European companies, active in superconducting materials and cables were present. This workshop has been organized to deal with the status of the world research and development on superconducting materials and cables for high field magnets (B > 10 T). The workshop has also reviewed the status of high temperature superconductors and transmission line cables for potential use in low field superconducting magnets for injectors and beam transfer lines, as well as cables for pulsed magnets that might be used in future hadron colliders or injectors.

Sixth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P. (eds.)

1980-12-18

INTRODUCTION TO THE PROCEEDINGS OF THE SIXTH GEOTHERMAL RESERVOIR ENGINEERING WORKSHOP, STANFORD GEOTHERMAL PROGRAM Henry J. Ramey, Jr., and Paul Kruger Co-Principal Investigators Ian G. Donaldson Program Manager Stanford Geothermal Program The Sixth Workshop on Geothermal Reservoir Engineering convened at Stanford University on December 16, 1980. As with previous Workshops the attendance was around 100 with a significant participation from countries other than the United States (18 attendees from 6 countries). In addition, there were a number of papers from foreign contributors not able to attend. Because of the success of all the earlier workshops there was only one format change, a new scheduling of Tuesday to Thursday rather than the earlier Wednesday through Friday. This change was in general considered for the better and will be retained for the Seventh Workshop. Papers were presented on two and a half of the three days, the panel session, this year on the numerical modeling intercomparison study sponsored by the Department of Energy, being held on the second afternoon. This panel discussion is described in a separate Stanford Geothermal Program Report (SGP-TR42). This year there was a shift in subject of the papers. There was a reduction in the number of papers offered on pressure transients and well testing and an introduction of several new subjects. After overviews by Bob Gray of the Department of Energy and Jack Howard of Lawrence Berkeley Laboratory, we had papers on field development, geopressured systems, production engineering, well testing, modeling, reservoir physics, reservoir chemistry, and risk analysis. A total of 51 papers were contributed and are printed in these Proceedings. It was, however, necessary to restrict the presentations and not all papers printed were presented. Although the content of the Workshop has changed over the years, the format to date has proved to be satisfactory. The objectives of the Workshop, the bringing together of

Survey of attitudes and practices of Irish nursing students towards hand hygiene, including handrubbing with alcohol-based hand rub.

Science.gov (United States)

Kingston, Liz M; O'Connell, Nuala H; Dunne, Colum P

2017-05-01

Hand hygiene is widely recognised as the most important measure a healthcare worker can take in preventing the spread of healthcare associated infections. As a member of the healthcare team, nursing students have direct patient contact during clinical practice; hence, good hand hygiene practice among nursing students is essential. Low to moderate levels of hand hygiene knowledge and poor attitudes and practices are reported among nursing students. However, less is known about their attitudes and practices of handrubbing with ABHR, even though handrubbing is the recommended optimum practice in most situations. The aim of this study was to explore attitudes and practices of hand hygiene, in particular handrubbing with alcohol-based hand rub, among nursing students in Ireland. This survey employed a descriptive, self-report design using a questionnaire to gather data. It was administered electronically to all undergraduate nursing students (n=342) in the Department of Nursing and Midwifery at the University of Limerick, Ireland in March and April 2015. Response rate was 66%. Attitudes towards hand hygiene were generally positive. Compliance with hand hygiene after contact with body fluid was high (99.5%) and before a clean or aseptic procedure (98.5%). However, suboptimal practices emerged, before touching a patient (85%), after touching a patient (87%) and after touching patients' surroundings (61%), with first year students more compliant than fourth year students. 16% of students were not aware of the clinical contraindications for using alcohol-based hand rub and 9% did not know when to use soap and water and when to use alcohol-based hand rub. Educators and practitioners play an important role in ensuring that nursing students develop appropriate attitudes towards hand hygiene and engage in optimal handrubbing practices. Raising awareness among nursing students of their responsibility in preventing the occurrence and reducing the transmission of HCAI as an on

On the feasibility of interoperable schemes in hand biometrics.

Science.gov (United States)

Morales, Aythami; González, Ester; Ferrer, Miguel A

2012-01-01

Personal recognition through hand-based biometrics has attracted the interest of many researchers in the last twenty years. A significant number of proposals based on different procedures and acquisition devices have been published in the literature. However, comparisons between devices and their interoperability have not been thoroughly studied. This paper tries to fill this gap by proposing procedures to improve the interoperability among different hand biometric schemes. The experiments were conducted on a database made up of 8,320 hand images acquired from six different hand biometric schemes, including a flat scanner, webcams at different wavelengths, high quality cameras, and contactless devices. Acquisitions on both sides of the hand were included. Our experiment includes four feature extraction methods which determine the best performance among the different scenarios for two of the most popular hand biometrics: hand shape and palm print. We propose smoothing techniques at the image and feature levels to reduce interdevice variability. Results suggest that comparative hand shape offers better performance in terms of interoperability than palm prints, but palm prints can be more effective when using similar sensors.

On the Feasibility of Interoperable Schemes in Hand Biometrics

Science.gov (United States)

Morales, Aythami; González, Ester; Ferrer, Miguel A.

2012-01-01

Personal recognition through hand-based biometrics has attracted the interest of many researchers in the last twenty years. A significant number of proposals based on different procedures and acquisition devices have been published in the literature. However, comparisons between devices and their interoperability have not been thoroughly studied. This paper tries to fill this gap by proposing procedures to improve the interoperability among different hand biometric schemes. The experiments were conducted on a database made up of 8,320 hand images acquired from six different hand biometric schemes, including a flat scanner, webcams at different wavelengths, high quality cameras, and contactless devices. Acquisitions on both sides of the hand were included. Our experiment includes four feature extraction methods which determine the best performance among the different scenarios for two of the most popular hand biometrics: hand shape and palm print. We propose smoothing techniques at the image and feature levels to reduce interdevice variability. Results suggest that comparative hand shape offers better performance in terms of interoperability than palm prints, but palm prints can be more effective when using similar sensors. PMID:22438714

1998 federal technical standards workshop: Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-10-01

The theme for the 1998 workshop was Standards Management -- A World of Change and Opportunities. The workshop`s goal was to further the implementation of the National Technology Transfer and Advancement Act of 1995 (Public Law 104-113) through the sharing of standards management success stories, lessons learned, and emerging initiatives within the Executive Branch of the Federal Government. The target audience for this workshop included agency/department and contractor personnel and representatives of standards developing organizations that either used technical standards in their work for the Federal Government of participated in standards writing/management activities in support of the missions and programs of Federal agencies/departments. As with previous standards workshops sponsored by the DOE, views on the technical subject areas under the workshop theme were solicited from and provided by agency Standards Executives and standards program managers, voluntary standards organizations, and the private sector. This report includes vugraphs of the presentations.

Proceedings on US-Japan workshop A-56 'irradiation effects on plasma diagnostic equipment'

International Nuclear Information System (INIS)

1986-06-01

This is a collection of abstracts and papers for the US-Japan Workshop A-56 on ''Irradiation Effects on Plasma Diagnostic Equipments'' held at the Institute of Plasma Physics, Nagoya University, on January 28 through 30, 1986. The topics presented at the workshop are classified as follows: 1) Definition of the problems and general views. 2) Radiation levels estimated from recent experiments and analysis on large tokamaks. 3) Radiation sensitivities of diagnostic components. 4) Neutron sources for irradiation testing. 5) Discussion on suggested experiments on radiation hardening and conclusions. The conclusions summarized by Dr. K. M. Young are also included. (author)

Hands-on optics: an informal science education initiative

Science.gov (United States)

Johnson, Anthony M.; Pompea, Stephen M.; Arthurs, Eugene G.; Walker, Constance E.; Sparks, Robert T.

2007-09-01

The project is collaboration between two scientific societies, the Optical Society of America (OSA) and SPIE - The International Society for Optical Engineering and the National Optical Astronomy Observatory (NOAO). The program is designed to bring science education enrichment to thousands of underrepresented middle school students in more than ten states, including female and minority students, who typically have not been the beneficiaries of science and engineering resources and investments. HOO provides each teacher with up to six activity modules, each containing enough materials for up to 30 students to participate in 6-8 hours of hands-on optics-related activities. Sample activities, developed by education specialists at NOAO, include building kaleidoscopes and telescopes, communicating with a beam of light, and a hit-the-target laser beam challenge. Teachers engage in two days of training and, where possible, are partnered with a local optics professional (drawn from the local rosters of SPIE and OSA members) who volunteers to spend time with the teacher and students as they explore the module activities. Through these activities, students gain experience and understanding of optics principles, as well as learning the basics of inquiry, critical thinking, and problem solving skills involving optics, and how optics interfaces with other disciplines. While the modules were designed for use in informal after- school or weekend sessions, the number of venues has expanded to large and small science centers, Boys and Girls Clubs, Girl Scouts, summer camps, family workshops, and use in the classroom.

On the Cutting Edge Professional Development Program: Workshop and Web Resources for Current and Future Geoscience Faculty

Science.gov (United States)

MacDonald, R.; Manduca, C. A.; Mogk, D. W.; Tewksbury, B. J.

2004-12-01

Recognizing that many college and university faculty receive little formal training in teaching, are largely unaware of advances in research on teaching and learning, and face a variety of challenges in advancing in academic careers, the National Science Foundation-funded program On the Cutting Edge provides professional development for current and future faculty in the geosciences at various stages in their careers. The program includes a series of six multi-day workshops, sessions and one-day workshops at professional meetings, and a website with information about workshop opportunities and a variety of resources that bring workshop content to faculty (http://serc.carleton.edu/NAGTWorkshops). The program helps faculty improve their teaching and their job satisfaction by providing resources on instructional methods, geoscience content, and strategies for career planning. Workshop and website resources address innovative and effective practices in teaching, course design, delivery of instructional materials, and career planning, as well as approaches for teaching particular topics and strategies for starting and maintaining a research program in various institutional settings. Each year, special workshops for graduate students and post-doctoral fellows interested in academic careers and for early career faculty complement offerings on course design and emerging topics that are open to the full geoscience community. These special workshops include sessions on topics such as dual careers, gender issues, family-work balance, interviewing and negotiating strategies. The workshops serve as opportunities for networking and community building, with participants building connections with other participants as well as workshop leaders. Workshop participants reflect the full range of institutional diversity as well as ethnic and racial diversity beyond that of the geoscience faculty workforce. More than 40 percent of the faculty participants are female. Of the faculty

Workshop on nuclear structure and decay data: Theory and evaluation manual - Pt. 2

International Nuclear Information System (INIS)

Nichols, A.L.; McLaughlin, P.K.; p.mclaughlin@iaea.org

2004-11-01

A two-week Workshop on Nuclear Structure and Decay Data: Theory and Evaluation was organized and administrated by the IAEA Nuclear Data Section, and hosted at the Abdus Salam International Centre for Theoretical Physics (ICTP) in Trieste, Italy from 17 to 28 November 2003. The aims and contents of this workshop are summarized, along with the agenda, list of participants, comments and recommendations. Workshop materials are also included that are freely available on CD-ROM (all relevant PowerPoint presentations and manuals along with appropriate computer codes). (author)

Workshop on nuclear structure and decay data: Theory and evaluation manual - Pt. 1

International Nuclear Information System (INIS)

Nichols, A.L.; McLaughlin, P.K.; p.mclaughlin@iaea.org

2004-11-01

A two-week Workshop on Nuclear Structure and Decay Data: Theory and Evaluation was organized and administrated by the IAEA Nuclear Data Section, and hosted at the Abdus Salam International Centre for Theoretical Physics (ICTP) in Trieste, Italy from 17 to 28 November 2003. The aims and contents of this workshop are summarized, along with the agenda, list of participants, comments and recommendations. Workshop materials are also included that are freely available on CD-ROM (all relevant PowerPoint presentations and manuals along with appropriate computer codes). (author)

Proceedings of the workshops on 'JAEA project researches at J-PARC/MLF'

International Nuclear Information System (INIS)

Kajimoto, Ryoichi; Maekawa, Fujio; Arima, Hiroshi; Yoshinari, Shizuka; Arai, Masatoshi

2011-06-01

The operation for public use of Materials and Life Science Experimental Facility (MLF) at Japan Proton Accelerator Research Complex (J-PARC) has started since the end of 2008. Rather stable neutron and muon beams at 120 kW are being supplied throughout 2010. Some of the instruments have already produced several good scientific outputs. Furthermore, operation at 200 kW, which exceeds the beam power of the ISIS facility in UK, has started since December 2010. In this promising situation for MLF, we hold three workshops for five neutron instruments which conducted researches for projects by Japan Atomic Energy Agency (JAEA) (project researches): 'Workshop on BL19 (Sep. 29)', 'Workshop on BL04+BL10 (Oct. 28)', and 'Workshop on BL01+BL14 (Oct. 29)'. There, status of the instruments and recent results of the project researches as well as a part of researches by general users were reported, and future directions and issues to be solved of the researches were discussed. This report includes abstracts, materials of the presentations and summary of discussions in the workshops. (author)

Workshop on wave-ice interaction

Science.gov (United States)

Wadhams, Peter; Squire, Vernon; Rottier, Philip; Liu, Antony; Dugan, John; Czipott, Peter; Shen, Hayley

The subject of wave-ice interaction has been advanced in recent years by small groups of researchers working on a similar range of topics in widely separated geographic locations. Their recent studies inspired a workshop on wave-ice interaction held at the Scott Polar Research Institute, University of Cambridge, England, December 16-18, 1991, where theories in all aspects of the physics of wave-ice interaction were compared.Conveners of the workshop hoped that plans for future observational and theoretical work dealing with outstanding issues in a collaborative way would emerge. The workshop, organized by the Commission on Sea Ice of the International Association for Physical Sciences of the Ocean (IAPSO), was co-chaired by Vernon Squire, professor of mathematics and statistics at the University of Otago, New Zealand, and Peter Wadhams, director of the Scott Polar Research Institute. Participants attended from Britain, Finland, New Zealand, Norway, and the United States.

Summary of 2017 NASA Workshop on Assessment of Advanced Battery Technologies for Aerospace Applications

Science.gov (United States)

Misra, Ajay

2018-01-01

A workshop on assessment of battery technologies for future aerospace applications was held in Cleveland, OH on August 16-17. The focus of the workshop, hosted by NASA GRC, was to assess (1) the battery needs for future aerospace missions, (2) the state of battery technology and projected technology advances, and (3) the need for additional investments for future aerospace missions. The workshop had 109 attendees that included internationally recognized technology leaders from academia and national laboratories, high level executives from government and industry, small businesses, and startup companies. A significant portion of the workshop was focused on batteries for electrified aircraft. The presentation will summarize the finding on the state of battery technologies for electrified aircraft and will include assessment of current state of battery technology, gaps in battery technology for application in electrified aircraft, and recommended technology development options for meeting near-term and long-term needs of electrified aircraft.

Report on workshop "Study of the polar atmosphere and cryosphere using satellite data with surface validation observations including unmanned one"

Directory of Open Access Journals (Sweden)

Hiroshi Kanzawa

1993-07-01

Full Text Available The workshop was organized to discuss algorithms to derive parameters of the polar atmosphere and cryosphere using satellite data received mainly at Syowa Station (69°S, 40°E, Antarctica, i.e., the data from NOAA, MOS (Marine Observation Satellite-1,ERS (European Remote Sensing Satellite-1,JERS (Japanese Earth Resources Satellite-1 with validation data at the surface. It was held on 16 March 1993 at the National Institute of Polar Research (NIPR, total number of participants being about 40. The contents of the workshop are as follows : The present status of receipt and utilization of the satellite data of NOAA, MOS-1,ERS-1,JERS-1; The Atmosphere; Sea ice; The Cryosphere; Introduction to the satellite data analysis system at the Information Science Center at NIPR.

Reports on the 2013 Workshop Program of the Seventh International AAAI Conference on Weblogs and Social Media

OpenAIRE

Archambault, Daniel; Celli, Fabio; Daly, Elizabeth M.; Erickson, Ingrid; Geyer, Werner; Halegoua, Germaine; Keegan, Brian; Millen, David R.; Schwartz, Raz; Shami, N. Sadat

2013-01-01

The Workshop Program of the Program of the Seventh International AAAI Conference on Weblogs and Social Media was held July 11, 2013, in Cambridge, Massachusetts. The program included four workshops, Computational Personality Recognition (Shared Task) (WS-13-01), Social Computing for Workforce 2.0 (WS-13-02), Social Media Visualization 2 (WS-13-03), and When the City Meets the Citizen (WS-13-04). This report summarizes the activities of the four workshops.

Summary of the 3rd workshop on the reduced-moderation water reactor

International Nuclear Information System (INIS)

Ishikawa, Nobuyuki; Nakatsuka, Tohru; Iwamura, Takamichi

2000-06-01

The research activities of a Reduced-Moderation Water Reactor (RMWR) are being performed for a development of the next generation water-cooled reactor. A workshop on the RMWR was held on March 3rd 2000 aiming to exchange information between JAERI and other organizations such as universities, laboratories, utilities and vendors. This report summarizes the contents of lectures and discussions on the workshop. The 1st workshop was held on March 1998 focusing on the review of the research activities and future research plan. The succeeding 2nd workshop was held on March 1999 focusing on the topics of the plutonium utilization in water-cooled reactors. The 3rd workshop was held on March 3rd 2000, which was attended by 77 participants. The workshop began with a lecture titled 'Recent Situation Related to Reduced-Moderation Water Reactor (RMWR)', followed by 'Program on MOX Fuel Utilization in Light Water Reactors' which is the mainstream scenario of plutonium utilization by utilities, and 'Feasibility Studies on Commercialized Fast Breeder Reactor Cycle System' mainly conducted by Japan Nuclear Cycle Development Institute (JNC). Also, following lectures were given as the recent research activities in JAERI: 'Progress in Design Study on Reduced-Moderation Water Reactors', 'Long-Term Scenarios of Power Reactors and Fuel Cycle Development and the Role of Reduced Moderation Water Reactors', 'Experimental and Analytical Study on Thermal Hydraulics' and Reactor Physics Experiment Plan using TCA'. At the end of the workshop, a general discussion was performed about the research and development of the RMWR. This report includes the original papers presented at the workshop and summaries of the questions and answers for each lecture and general discussion, as well as presentation viewgraphs, program and participant list as appendixes. The 7 of the presented papers are indexed individually. (J.P.N.)

Summary of the 3rd workshop on the reduced-moderation water reactor

Energy Technology Data Exchange (ETDEWEB)

Ishikawa, Nobuyuki; Nakatsuka, Tohru; Iwamura, Takamichi [eds.

2000-06-01

The research activities of a Reduced-Moderation Water Reactor (RMWR) are being performed for a development of the next generation water-cooled reactor. A workshop on the RMWR was held on March 3rd 2000 aiming to exchange information between JAERI and other organizations such as universities, laboratories, utilities and vendors. This report summarizes the contents of lectures and discussions on the workshop. The 1st workshop was held on March 1998 focusing on the review of the research activities and future research plan. The succeeding 2nd workshop was held on March 1999 focusing on the topics of the plutonium utilization in water-cooled reactors. The 3rd workshop was held on March 3rd 2000, which was attended by 77 participants. The workshop began with a lecture titled 'Recent Situation Related to Reduced-Moderation Water Reactor (RMWR)', followed by 'Program on MOX Fuel Utilization in Light Water Reactors' which is the mainstream scenario of plutonium utilization by utilities, and 'Feasibility Studies on Commercialized Fast Breeder Reactor Cycle System' mainly conducted by Japan Nuclear Cycle Development Institute (JNC). Also, following lectures were given as the recent research activities in JAERI: 'Progress in Design Study on Reduced-Moderation Water Reactors', 'Long-Term Scenarios of Power Reactors and Fuel Cycle Development and the Role of Reduced Moderation Water Reactors', 'Experimental and Analytical Study on Thermal Hydraulics' and Reactor Physics Experiment Plan using TCA'. At the end of the workshop, a general discussion was performed about the research and development of the RMWR. This report includes the original papers presented at the workshop and summaries of the questions and answers for each lecture and general discussion, as well as presentation viewgraphs, program and participant list as appendixes. The 7 of the presented papers are indexed individually. (J.P.N.)

Proceedings of the 1982 summer workshop on proton decay experiments

International Nuclear Information System (INIS)

Ayres, D.S.

1982-01-01

Separate abstracts were prepared for 18 of the 21 papers presented. Three papers were previously included in the data base. Also included in the proceedings are a workshop summary, working group reports, and a report of the Technical assessment Panel on Proton Decay

Outcomes of the 'Data Curation for Geobiology at Yellowstone National Park' Workshop

Science.gov (United States)

Thomer, A.; Palmer, C. L.; Fouke, B. W.; Rodman, A.; Choudhury, G. S.; Baker, K. S.; Asangba, A. E.; Wickett, K.; DiLauro, T.; Varvel, V.

2013-12-01

The continuing proliferation of geological and biological data generated at scientifically significant sites (such as hot springs, coral reefs, volcanic fields and other unique, data-rich locales) has created a clear need for the curation and active management of these data. However, there has been little exploration of what these curation processes and policies would entail. To that end, the Site-Based Data Curation (SBDC) project is developing a framework of guidelines and processes for the curation of research data generated at scientifically significant sites. A workshop was held in April 2013 at Yellowstone National Park (YNP) to gather input from scientists and stakeholders. Workshop participants included nine researchers actively conducting geobiology research at YNP, and seven YNP representatives, including permitting staff and information professionals from the YNP research library and archive. Researchers came from a range of research areas -- geology, molecular and microbial biology, ecology, environmental engineering, and science education. Through group discussions, breakout sessions and hands-on activities, we sought to generate policy recommendations and curation guidelines for the collection, representation, sharing and quality control of geobiological datasets. We report on key themes that emerged from workshop discussions, including: - participants' broad conceptions of the long-term usefulness, reusability and value of data. - the benefits of aggregating site-specific data in general, and geobiological data in particular. - the importance of capturing a dataset's originating context, and the potential usefulness of photographs as a reliable and easy way of documenting context. - researchers' and resource managers' overlapping priorities with regards to 'big picture' data collection and management in the long-term. Overall, we found that workshop participants were enthusiastic and optimistic about future collaboration and development of community

Proceedings of the workshop on experiments and experimental facilities at SIS/ESR

International Nuclear Information System (INIS)

1987-04-01

The present proceedings contain the abstracts of the proposals and letters of intent prepared by the authors for general distribution. The abstracts are organized according to the sessions in which they were presented at the workshop. The program of the workshop is also included as is the list of attendees. In addition we have included two recent descriptions of the accelerator facilities providing information on the latest status of the expected beam schedule for SIS and performance characteristics of the ESR. (orig./HSI)

Proceedings of the NOAMI workshop : a workshop to explore perspectives on risk assessment for orphaned and abandoned mines

International Nuclear Information System (INIS)

2009-03-01

This workshop hosted by the National Orphaned/Abandoned Mines Initiative (NOAMI) discussed risk assessment strategies and perspectives for orphaned and abandoned mines in Canada. Different perspectives related to the risk assessment process were considered by participants from local, provincial, federal, and territorial agencies as well as non-governmental, academic, and mining industry organizations. Strategies for effectively communicating with local communities were discussed. New methods of assessing risk related to bioavailability and bioaccessibility were reviewed along with approaches to risk assessment and risk management in relation to the Environmental Management Act. Case studies of risk assessment and remediation projects were presented. The workshop presentations were divided into the following 6 sessions: (1) keynote, (2) opening panel, (3) human health panel, (4) ecological panel, (5) geotechnical-safety risk assessment panel, and (6) case studies and perspectives. The workshop featured 22 presentations, of which 2 have been catalogued separately for inclusion in this database. A report on detailed ecological risk assessment (DERA) in British Columbia prepared by the Science Advisory Board for Contaminated Sites in British Columbia (BC) was included, as well as a final report that summarized presentations given at the workshop. refs., tabs., figs

Results from the Wisdom stakeholder workshop on restoration management

International Nuclear Information System (INIS)

Nisbet, A.

2003-01-01

Full text: A Workshop to extend the Involvement of Stakeholders in Decisions On restoration Management (WISDOM) will be held in Oxford in September 2003. The aim of the workshop is to promote awareness and interest in the wider application of stakeholder involvement in the formulation of strategies for the management of contaminated agricultural land and produce following a nuclear accident. A network of stakeholder groups has already been set up under the auspices of the European Communities 5th Framework Programme (FP5). The network, given the acronym FARMING, involves more than 100 stakeholders in UK, Finland, Belgium, Greece and France. Membership tends to be at a senior level and comprises a wide range of Government and non-government organizations, including the farming sector, the food, milk and water industries, consumers and green groups. The stakeholder groups have met regularly since 2001 and have advanced contingency planning and emergency response, both nationally and on a European basis. A compendium of countermeasure options produced by another FP5 project, STRATEGY, has helped provide stakeholders with a common focus for discussion and evaluation. The 2 1/2 day workshop comprises a mixture of invited and proffered papers as well as facilitated group discussions and plenary sessions that will address the following issues: lessons learnt from stakeholder engagement; influence of regional characteristics on countermeasure selection; practical aspects of countermeasure implementation; crisis management; maintaining consumer confidence; acceptability of intervention limits; social, ethical and economic consequences; future prospects for stakeholder networks. More than 30 FARMING stakeholders and facilitators have expressed an interest in attending the WISDOM workshop. GOs and NGOs will both be represented. There will also be representatives from the STRATEGY project and the European Commission. Invitations have been issued to representatives of a further

The Blue Dot Workshop: Spectroscopic Search for Life on Extrasolar Planets

Science.gov (United States)

Des Marais, David J. (Editor)

1997-01-01

This workshop explored the key questions and challenges associated with detecting life on an extrasolar planet. The final product will be a NASA Conference Publication which includes the abstracts from 21 talks, summaries of key findings, and recommendations for future research. The workshop included sessions on three related topics: the biogeochemistry of biogenic gases in the atmosphere, the chemistry and spectroscopy of planetary atmospheres, and the remote sensing of planetary atmospheres and surfaces. With the observation that planetary formation is probably a common phenomenon, together with the advent of the technical capability to locate and describe extrasolar planets, this research area indeed has an exciting future.

Proceedings of the eleventh international workshop on ceramic breeder blanket interactions

International Nuclear Information System (INIS)

Enoeda, Mikio

2004-07-01

This report is the Proceedings of 'the Eleventh International Workshop on Ceramic Breeder Blanket Interactions' which was held as a workshop on ceramic breeders Under the IEA Implementing Agreement on the Nuclear Technology of Fusion Reactors, and the Japan-US Fusion Collaboration Framework. This workshop was held in Tokyo, Japan on December 15-17, 2003. About thirty experts from China, EU, Japan, Korea, Latvia, Russia and USA attended the workshop. The scope of the workshop included 1) evolutions in ceramic breeder blanket design, 2) progress in ceramic breeder material development, 3) irradiation testing, 4) breeder material properties, 5) out-of-pile pebble bed experiment, 6) modeling of the thermal, mechanical and tritium transfer behavior of pebble beds and 7) interfacing issues of solid breeder blanket. In the workshop, information exchange was performed for designs of solid breeder blankets and test blankets in EU, Russia and Japan, recent results of irradiation tests, HICU, EXOTIC-8 and the irradiation tests by IVV-2M, modeling study on tritium release behavior of Li 2 TiO 3 and so on, fabrication technology developments and characterization of the Li 2 TiO 3 and Li 4 SiO 4 pebbles, research on measurements and modeling of thermo-mechanical behaviors of Li 2 TiO 3 and Li 4 SiO 4 pebbles, and interfacing issues, such as, fabrication technology for blanket box structure, neutronics experiments of blanket mockups by fusion neutron source and tritium recovery system. The 26 of the presented papers are indexed individually. (J.P.N.)

Program and Poster Abstracts from the Workshop on the Formation and Growth of Atmospheric Aerosols

Energy Technology Data Exchange (ETDEWEB)

McMurry, Peter H. [Univ. of Minnesota, Minneapolis, MN (United States). Dept. of Mechanical Engineering; Kulmala, Markku [Univ. of Helsinki (Finland). Dept. of Physics. Division of Atmospheric Sciences

2006-09-09

DOE provided $11,000 to sponsor the Workshop on New Particle Formation in the Atmosphere, which was held at The Riverwood Inn and Conference Center near Minneapolis, MN from September 7 to 9, 2006. Recent work has shown that new particle formation is an important atmospheric process that must be better understood due to its impact on cloud cover and the Earth's radiation balance. The conference was an informal gathering of atmospheric and basic scientists with expertise pertinent to this topic. The workshop included discussions of: • atmospheric modeling; • computational chemistry pertinent to clustering; • ions and ion induced nucleation; • basic laboratory and theoretical studies of nucleation; • studies on neutral molecular clusters; • interactions of organic compounds and sulfuric acid; • composition of freshly nucleated particles. Fifty six scientists attended the conference. They included 27 senior scientists, 9 younger independent scientists (assistant professor or young associate professor level), 7 postdocs, 13 graduate students, 10 women, 35 North Americans (34 from the U.S.), 1 Asian, and 20 Europeans. This was an excellent informal workshop on an important topic. An effort was made to include individuals from communities that do not regularly interact. A number of participants have provided informal feedback indicating that the workshop led to research ideas and possible future collaborations. This document includes abstracts from this workshop.

On the other hand: including left-handers in cognitive neuroscience and neurogenetics.

Science.gov (United States)

Willems, Roel M; Van der Haegen, Lise; Fisher, Simon E; Francks, Clyde

2014-03-01

Left-handers are often excluded from study cohorts in neuroscience and neurogenetics in order to reduce variance in the data. However, recent investigations have shown that the inclusion or targeted recruitment of left-handers can be informative in studies on a range of topics, such as cerebral lateralization and the genetic underpinning of asymmetrical brain development. Left-handed individuals represent a substantial portion of the human population and therefore left-handedness falls within the normal range of human diversity; thus, it is important to account for this variation in our understanding of brain functioning. We call for neuroscientists and neurogeneticists to recognize the potential of studying this often-discarded group of research subjects.

China-US-Japan workshop on laser plasma and drivers

International Nuclear Information System (INIS)

1994-01-01

Organized by China Institute of Applied Physics and Computational Mathematics (IMPCM) and other 5 organizations, China-US-Japan Workshop on Laser Plasma and Drivers, LPD'94, was held on October 17-21, 1994 at Fragrant Hill Hotel, Beijing, China. Main topics includes: target and plasma physics, ICF Experiments, ICF drivers, etc.. More than 50 pieces of papers are included in the proceedings

Proceedings of the international workshop on spallation materials technology

Energy Technology Data Exchange (ETDEWEB)

Mansur, L.K.; Ullmaier, H. [comps.

1996-10-01

This document contains papers which were presented at the International Workshop on Spallation Materials Technology. Topics included: overviews and thermal response; operational experience; materials experience; target station and component design; particle transport and damage calculations; neutron sources; and compatibility.

Workshop on advanced nuclear data online services. Summary report

International Nuclear Information System (INIS)

Schwerer, O.

2000-09-01

This report summarizes the Workshop on Advanced Nuclear Data Online Services held in Vienna, Austria, 29 November to 3 December 1999. It includes the main topics of the agenda, the list of participants, and general comments and recommendations. (author)

Proceedings of the international workshop on spallation materials technology

International Nuclear Information System (INIS)

Mansur, L.K.; Ullmaier, H.

1996-01-01

This document contains papers which were presented at the International Workshop on Spallation Materials Technology. Topics included: overviews and thermal response; operational experience; materials experience; target station and component design; particle transport and damage calculations; neutron sources; and compatibility

2016 FACET-II Science Workshop Summary Report

Energy Technology Data Exchange (ETDEWEB)

Hogan, Mark J., ed.

2017-07-19

The second in a series of FACET-II Science Workshops was held at SLAC National Accelerator Laboratory on October 17-19, 2016 [1]. The workshop drew thirty-five participants from eighteen different institutions including CERN, DESY, Ecole Polytechnique, FNAL, JAI, LBNL, LLNL, Radiabeam, Radiasoft, SLAC, Stony Brook, Strathclyde, Tech-X, Tsinghua, UC Boulder, UCLA and UT Austin. The 2015 workshop [2, 3] helped prioritize research directions for FACET-II. The 2016 workshop was focused on understanding what improvements are needed at the facility to support the next generation of experiments. All presentations are linked to the workshop website as a permanent record.

Joint WHO/ISH workshop on efficacy and radiation safety in interventional radiology

International Nuclear Information System (INIS)

Baeuml, A.; Bauer, B.; Bernhardt, J.H.; Stieve, F.E.; Veit, R.; Zeitlberger, I.

1997-02-01

With the constantly developing technology and the opening of new fields of application, the implementation of Interventional Radiology (IR) is increasing considerably. These sophisticated procedures can frequently replace open surgery, and this is of enormous benefit for the patient. On the other hand, IR involves prolonged application of fluoroscopy and - due to the need for excellent image quality - partly very high dose-rate levels. Additionally, cine-series, and alsogreat numbers of single radiographs are necessary. Accordingly, the levels of exposure to patients and staff are very high. In order to consider possible reduction of the radiation risks of IR procedures interdiciplinary talks between representatives of manufacturers of X-ray equipment, hospital physicists and the clinical community would seem necessary in order to find ways of avoiding unproductive radiation exposure to the patient and to clinical staff. This was the aim of a workshop on IR, which was jointly organized by the World Health Organization and the Institute of Radiation Hygiene of the Federal Office for Radiation Protection in Germany in October 1995. It was intended as a forum for the discussion of issues related to IR, and to forster improved application, that is to say as an opportunity: To present the state of the art; to work out proposals for more efficient clinical protocols; to discuss on schemes of education and training and on equipment-related developments. Improvement of radiation safety for both patients and staff, was the general aim of the workshop. This volume contains the presentations given on the first day of the workshop. (orig./DG) [de

Workshop on Computational Optimization

CERN Document Server

2016-01-01

This volume is a comprehensive collection of extended contributions from the Workshop on Computational Optimization 2014, held at Warsaw, Poland, September 7-10, 2014. The book presents recent advances in computational optimization. The volume includes important real problems like parameter settings for controlling processes in bioreactor and other processes, resource constrained project scheduling, infection distribution, molecule distance geometry, quantum computing, real-time management and optimal control, bin packing, medical image processing, localization the abrupt atmospheric contamination source and so on. It shows how to develop algorithms for them based on new metaheuristic methods like evolutionary computation, ant colony optimization, constrain programming and others. This research demonstrates how some real-world problems arising in engineering, economics, medicine and other domains can be formulated as optimization tasks.

Workshop on Computational Optimization

CERN Document Server

2015-01-01

Our everyday life is unthinkable without optimization. We try to minimize our effort and to maximize the achieved profit. Many real world and industrial problems arising in engineering, economics, medicine and other domains can be formulated as optimization tasks. This volume is a comprehensive collection of extended contributions from the Workshop on Computational Optimization 2013. It presents recent advances in computational optimization. The volume includes important real life problems like parameter settings for controlling processes in bioreactor, resource constrained project scheduling, problems arising in transport services, error correcting codes, optimal system performance and energy consumption and so on. It shows how to develop algorithms for them based on new metaheuristic methods like evolutionary computation, ant colony optimization, constrain programming and others.

On the Feasibility of Interoperable Schemes in Hand Biometrics

Directory of Open Access Journals (Sweden)

Miguel A. Ferrer

2012-02-01

Full Text Available Personal recognition through hand-based biometrics has attracted the interest of many researchers in the last twenty years. A significant number of proposals based on different procedures and acquisition devices have been published in the literature. However, comparisons between devices and their interoperability have not been thoroughly studied. This paper tries to fill this gap by proposing procedures to improve the interoperability among different hand biometric schemes. The experiments were conducted on a database made up of 8,320 hand images acquired from six different hand biometric schemes, including a flat scanner, webcams at different wavelengths, high quality cameras, and contactless devices. Acquisitions on both sides of the hand were included. Our experiment includes four feature extraction methods which determine the best performance among the different scenarios for two of the most popular hand biometrics: hand shape and palm print. We propose smoothing techniques at the image and feature levels to reduce interdevice variability. Results suggest that comparative hand shape offers better performance in terms of interoperability than palm prints, but palm prints can be more effective when using similar sensors.

Workshops som forskningsmetode

OpenAIRE

Ørngreen, Rikke; Levinsen, Karin Tweddell

2017-01-01

This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice, and workshops as a research methodology. Focusing primarily on the latter, this paper presents five studies on upper secondary and higher education teachers’ professional development and on teaching and learnin...

Technology transfer - insider protection workshop (Safeguards Evaluation Method - Insider Threat)

International Nuclear Information System (INIS)

Strait, R.S.; Renis, T.A.

1986-01-01

The Safeguards Evaluation Method - Insider Threat, developed by Lawrence Livermore National Laboratory, is a field-applicable tool to evaluate facility safeguards against theft or diversion of special nuclear material (SNM) by nonviolent insiders. To ensure successful transfer of this technology from the laboratory to DOE field offices and contractors, LLNL developed a three-part package. The package includes a workbook, user-friendly microcomputer software, and a three-day training program. The workbook guides an evaluation team through the Safeguards Evaluation Method and provides forms for gathering data. The microcomputer software assists in the evaluation of safeguards effectiveness. The software is designed for safeguards analysts with no previous computer experience. It runs on an IBM Personal Computer or any compatible machine. The three-day training program is called the Insider Protection Workshop. The workshop students learn how to use the workbook and the computer software to assess insider vulnerabilities and to evaluate the benefits and costs of potential improvements. These activities increase the students' appreciation of the insider threat. The workshop format is informal and interactive, employing four different instruction modes: classroom presentations, small-group sessions, a practical exercise, and ''hands-on'' analysis using microcomputers. This approach to technology transfer has been successful: over 100 safeguards planners and analysts have been trained in the method, and it is being used at facilities through the DOE complex

Report on the Marine Imaging Workshop 2017

Directory of Open Access Journals (Sweden)

Timm Schoening

2017-06-01

Full Text Available Marine optical imaging has become a major assessment tool in science, policy and public understanding of our seas and oceans. Methodology in this field is developing rapidly, including hardware, software and the ways of their application. The aim of the Marine Imaging Workshop (MIW is to bring together academics, research scientists and engineers, as well as industrial partners to discuss these developments, along with applications, challenges and future directions. The first MIW was held in Southampton, UK in April 2014. The second MIW, held in Kiel, Germany, in 2017 involved more than 100 attendees, who shared the latest developments in marine imaging through a combination of traditional oral and poster presentations, interactive sessions and focused discussion sessions. This article summarises the topics addressed during the workshop, particularly the outcomes of these discussion sessions for future reference and to make the workshop results available to the open public.

Experience from the Inspection of Licensees' Outage Activities, Including Fire Protection Programmes, Event Response Inspections, and the Impact of the Fukushima Daiichi NPP Accident on Inspection Programmes. Workshop Proceedings, Chattanooga, Tennessee, United States, 7-10 April 2014

International Nuclear Information System (INIS)

2014-10-01

The main purpose of the workshop was to provide a forum of exchange of information on the regulatory inspection activities. Participants had the opportunity to meet with their counterparts from other countries and organisations to discuss current and future issues on the selected topics. They developed conclusions regarding these issues and hopefully, identified methods to help improve their own inspection programmes. The NEA Committee on Nuclear Regulatory Activities (CNRA) believes that an essential factor in ensuring the safety of nuclear installations is the continuing exchange and analysis of technical information and data. To facilitate this exchange the Committee has established working groups and groups of experts in specialised topics. The Working Group on Inspection Practices (WGIP) was formed in 1990 with the mandate '..to concentrate on the conduct of inspections and how the effectiveness of inspections could be evaluated..'. The WGIP facilitates the exchange of information and experience related to regulatory safety inspections between CNRA member countries. These proceedings cover the 12. International Workshop held by WGIP on regulatory inspection activities. This workshop, which is the twelfth in a series, along with many other activities performed by the Working Group, is directed towards this goal. The consensus from participants at previous workshops, noted that the value of meeting with people from other inspection organisations was one of the most important achievements. The focus of this workshop was on experience gained from regulatory inspection activities in three areas: - Inspection of Outage Activities Including Fire Protection Programmes. - Event Response Inspections. - The Impact of Inspection Programmes of the Fukushima Daiichi Nuclear Power Plant (NPP) Accident. The main objectives of the WGIP workshops are to enable inspectors to meet with inspectors from other organisations, to exchange information regarding regulatory inspection

International workshop on multimodal analyses enabling artificial agents in human-machine interaction (workshop summary)

NARCIS (Netherlands)

Böck, Ronald; Bonin, Francesca; Campbell, Nick; Poppe, R.W.

2016-01-01

In this paper a brief overview of the third workshop on Multimodal Analyses enabling Artificial Agents in Human-Machine Interaction. The paper is focussing on the main aspects intended to be discussed in the workshop reflecting the main scope of the papers presented during the meeting. The MA3HMI

PREFACE: International Workshop on Multi-Rate Processes and Hysteresis

Science.gov (United States)

Mortell, Michael P.; O'Malley, Robert E.; Pokrovskii, Alexei; Rachinskii, Dmitrii; Sobolev, Vladimir A.

2008-07-01

published as a special issue of Proceedings of the Russian Academy of Natural Sciences: Nonlinear dynamics of laser and reacting systems, and is available online at http://www.ins.ucc.ie/roh2002.htm. See further information at http://www.ins.ucc.ie/roh2002.htm Among the aims of these workshops were to bring together leading experts in singular perturbations and hysteresis phenomena in applied problems; to discuss important problems in areas such as reacting systems, semiconductor lasers, shock phenomena in economic modelling, fluid mechanics, etc with an emphasis on hysteresis and singular perturbations; to learn and to share modern techniques in areas of common interest. The `International Workshop on Multi-Rate Processes and Hysteresis' (University College Cork, Ireland, April 3-8, 2006) brought together more than 70 scientists (including more than 10 students), actively researching in the areas of dynamical systems with hysteresis and singular perturbations, to analyze those phenomena that occur in many industrial, physical and economic systems. The countries represented at the Workshop included Czech Republic, England, France, Germany, Hungary, Ireland, Israel, Italy, Poland, Romania, Russia, Scotland, South Africa, Switzerland and USA. All papers published in this volume of Journal of Physics: Conference Series have been peer reviewed through processes administered by the Editors. Reviews were conducted by expert referees to the professional and scientific standards expected of a proceedings journal published by IOP Publishing. The Workshop has been sponsored by Science Foundation Ireland (SFI), KE Consulting group, Drexel University, Philadelphia, USA, University College Cork (UCC), Boole Centre for Research in Informatics, UCC, Cork, School of Mathematical Sciences, UCC, Cork, Irish Mathematical Society, Tyndall National Institute, Cork, University of Limerick, Cork Institute of Technology, and Heineken. The supportive affiliation of the European Geophysics Society

Workshop on Radioanalytical Chemistry for Radioecology and Waste Management: Report, evaluation, abstracts and full papers of presentations

Energy Technology Data Exchange (ETDEWEB)

Hou, X. (Technical Univ. of Denmark, Risoe National Lab. for Sustainable Energy. Radiation Research Div., Roskilde (Denmark))

2010-03-15

A NKS-B workshop on radioanalytical chemistry for radioecology and waste management was held at Risoe, Roskilde, Denmark in 16-20th November 2009. The workshop was organized as 3 days lectures and presentations and two days laboratory practice. 48 peoples participated the workshop, including 32 young participants from Denmark, Finland, Norway, Sweden, Lithuania and Ireland. This report gives a brief description of the workshop and an evaluation of the workshop by statistic analysis of questionnaires feed back from the participants. The book of abstracts and proceedings presented in the workshop is enclosed. (author)

Workshop on Radioanalytical Chemistry for Radioecology and Waste Management: Report, evaluation, abstracts and full papers of presentations

International Nuclear Information System (INIS)

Hou, X.

2010-03-01

A NKS-B workshop on radioanalytical chemistry for radioecology and waste management was held at Risoe, Roskilde, Denmark in 16-20th November 2009. The workshop was organized as 3 days lectures and presentations and two days laboratory practice. 48 peoples participated the workshop, including 32 young participants from Denmark, Finland, Norway, Sweden, Lithuania and Ireland. This report gives a brief description of the workshop and an evaluation of the workshop by statistic analysis of questionnaires feed back from the participants. The book of abstracts and proceedings presented in the workshop is enclosed. (author)

Summary report of IAEA workshop on atomic and molecular data for fusion energy research

International Nuclear Information System (INIS)

Clark, R.E.H.

2007-02-01

A workshop on Atomic and Molecular (A+M) Data for Fusion Energy Research was held at the International Centre for Theoretical Physics (ICTP) in Trieste, Italy, from 28 August until 8 September 2006. The workshop was attended by fourteen students and three ICTP associates representing eleven Member States. A total of eight lecturers, including six external to the Agency, made presentations to the workshop. All lecturers provided advance copies of the lecture materials, and provided written assignments for the students to provide practical examples of applications of data issues to actual problems related to fusion energy research. All materials were collected on CDs, which were distributed to the students at the conclusion of the workshop. During the course of the workshop, the students were given the opportunity to describe their background and research interests. The workshop did arouse interest in A+M processes related to fusion, and was viewed as successful by both the students and lecturers. (author)

PREFACE: The International Workshop on Positron Studies of Defects 2014

Science.gov (United States)

Sugita, Kazuki; Shirai, Yasuharu

2016-01-01

The International Workshop on Positron Studies of Defects 2014 (PSD-14) was held in Kyoto, Japan from 14-19 September, 2014. The PSD Workshop brought together positron scientists interested in studying defects to an international platform for presenting and discussing recent results and achievements, including new experimental and theoretical methods in the field. The workshop topics can be characterized as follows: • Positron studies of defects in semiconductors and oxides • Positron studies of defects in metals • New experimental methods and equipment • Theoretical calculations and simulations of momentum distributions, positron lifetimes and other characteristics for defects • Positron studies of defects in combination with complementary methods • Positron beam studies of defects at surfaces, interfaces, in sub-surface regions and thin films • Nanostructures and amorphous materials

A Tale Of 160 Scientists, Three Applications, a Workshop and a Cloud

Science.gov (United States)

Berriman, G. B.; Brinkworth, C.; Gelino, D.; Wittman, D. K.; Deelman, E.; Juve, G.; Rynge, M.; Kinney, J.

2013-10-01

The NASA Exoplanet Science Institute (NExScI) hosts the annual Sagan Workshops, thematic meetings aimed at introducing researchers to the latest tools and methodologies in exoplanet research. The theme of the Summer 2012 workshop, held from July 23 to July 27 at Caltech, was to explore the use of exoplanet light curves to study planetary system architectures and atmospheres. A major part of the workshop was to use hands-on sessions to instruct attendees in the use of three open source tools for the analysis of light curves, especially from the Kepler mission. Each hands-on session involved the 160 attendees using their laptops to follow step-by-step tutorials given by experts. One of the applications, PyKE, is a suite of Python tools designed to reduce and analyze Kepler light curves; these tools can be invoked from the Unix command line or a GUI in PyRAF. The Transit Analysis Package (TAP) uses Markov Chain Monte Carlo (MCMC) techniques to fit light curves under the Interactive Data Language (IDL) environment, and Transit Timing Variations (TTV) uses IDL tools and Java-based GUIs to confirm and detect exoplanets from timing variations in light curve fitting. Rather than attempt to run these diverse applications on the inevitable wide range of environments on attendees laptops, they were run instead on the Amazon Elastic Cloud 2 (EC2). The cloud offers features ideal for this type of short term need: computing and storage services are made available on demand for as long as needed, and a processing environment can be customized and replicated as needed. The cloud environment included an NFS file server virtual machine (VM), 20 client VMs for use by attendees, and a VM to enable ftp downloads of the attendees' results. The file server was configured with a 1 TB Elastic Block Storage (EBS) volume (network-attached storage mounted as a device) containing the application software and attendees home directories. The clients were configured to mount the applications and

IJCAI-91 Workshop on Objects and Artificial Intelligence

OpenAIRE

Hatzilygeroudis, Ioannis

1994-01-01

The Objects and Artificial Intelligence Workshop was held on 25 August 1991 in conjunction with the 1991 International Joint Conference on Artificial Intelligence. The workshop brought together researchers in AI and object-oriented programming to exchange ideas and investigate possible avenues of cooperation between AI and object-oriented programming. The workshop dealt with both the theoretical and the practical aspects of this cooperation.

Risk Management Techniques and Practice Workshop Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Quinn, T; Zosel, M

2008-12-02

At the request of the Department of Energy (DOE) Office of Science (SC), Lawrence Livermore National Laboratory (LLNL) hosted a two-day Risk Management Techniques and Practice (RMTAP) workshop held September 18-19 at the Hotel Nikko in San Francisco. The purpose of the workshop, which was sponsored by the SC/Advanced Scientific Computing Research (ASCR) program and the National Nuclear Security Administration (NNSA)/Advanced Simulation and Computing (ASC) program, was to assess current and emerging techniques, practices, and lessons learned for effectively identifying, understanding, managing, and mitigating the risks associated with acquiring leading-edge computing systems at high-performance computing centers (HPCCs). Representatives from fifteen high-performance computing (HPC) organizations, four HPC vendor partners, and three government agencies attended the workshop. The overall workshop findings were: (1) Standard risk management techniques and tools are in the aggregate applicable to projects at HPCCs and are commonly employed by the HPC community; (2) HPC projects have characteristics that necessitate a tailoring of the standard risk management practices; (3) All HPCC acquisition projects can benefit by employing risk management, but the specific choice of risk management processes and tools is less important to the success of the project; (4) The special relationship between the HPCCs and HPC vendors must be reflected in the risk management strategy; (5) Best practices findings include developing a prioritized risk register with special attention to the top risks, establishing a practice of regular meetings and status updates with the platform partner, supporting regular and open reviews that engage the interests and expertise of a wide range of staff and stakeholders, and documenting and sharing the acquisition/build/deployment experience; and (6) Top risk categories include system scaling issues, request for proposal/contract and acceptance testing, and

Report of the workshop on Climate Sensitivity

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

The IPCC Working Group I (WGI) held this Workshop on Climate Sensitivity as a major keystone in activities preparing for the WGI contribution to the IPCC Fourth Assessment Report (AR4). One of the most important parameters in climate science is the 'climate sensitivity', broadly defined as the global mean temperature change for a given forcing, often that of a doubling of atmospheric carbon dioxide. Climate sensitivity has played a central role throughout the history of IPCC in interpretation of model outputs, in evaluation of future climate changes expected from various scenarios, and it is closely linked to attribution of currently observed climate changes. An ongoing challenge to models and to climate projections has been to better define this key parameter, and to understand the differences in computed values between various models. Throughout the last three IPCC assessments the climate sensitivity has been estimated as being in the range 1.5 to 4.5 deg. C for CO{sub 2} doubling (i.e., uncertain by a factor of three), making this parameter central to discussions of uncertainty in climate change. The aims of the workshop were to: - Evaluate a range of climate model results so as to relate different climate sensitivity estimates to differences descriptions of physical processes, particularly those related to atmospheric water vapor, clouds, lapse rate changes, ocean heat uptake, treatment of evapotranspiration, land-atmosphere coupling, etc.; - Obtain a more comprehensive picture of the relationships between climate sensitivity and other model features such as resolution, numerical approach, radiative transfer parameters, etc.; - Consider how current, historical, and paleo-climatic data can aid in the determination of the likely range of climate sensitivity; - Improve the understanding of the interpretation and limits of the climate sensitivity concept, including for example possible dependencies upon different forcing agents, predictability questions, and

Report of the workshop on Climate Sensitivity

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

The IPCC Working Group I (WGI) held this Workshop on Climate Sensitivity as a major keystone in activities preparing for the WGI contribution to the IPCC Fourth Assessment Report (AR4). One of the most important parameters in climate science is the 'climate sensitivity', broadly defined as the global mean temperature change for a given forcing, often that of a doubling of atmospheric carbon dioxide. Climate sensitivity has played a central role throughout the history of IPCC in interpretation of model outputs, in evaluation of future climate changes expected from various scenarios, and it is closely linked to attribution of currently observed climate changes. An ongoing challenge to models and to climate projections has been to better define this key parameter, and to understand the differences in computed values between various models. Throughout the last three IPCC assessments the climate sensitivity has been estimated as being in the range 1.5 to 4.5 deg. C for CO{sub 2} doubling (i.e., uncertain by a factor of three), making this parameter central to discussions of uncertainty in climate change. The aims of the workshop were to: - Evaluate a range of climate model results so as to relate different climate sensitivity estimates to differences descriptions of physical processes, particularly those related to atmospheric water vapor, clouds, lapse rate changes, ocean heat uptake, treatment of evapotranspiration, land-atmosphere coupling, etc.; - Obtain a more comprehensive picture of the relationships between climate sensitivity and other model features such as resolution, numerical approach, radiative transfer parameters, etc.; - Consider how current, historical, and paleo-climatic data can aid in the determination of the likely range of climate sensitivity; - Improve the understanding of the interpretation and limits of the climate sensitivity concept, including for example possible dependencies upon different forcing agents, predictability questions

Nuclear Innovation Workshops Report

Energy Technology Data Exchange (ETDEWEB)

Jackson, John Howard [Idaho National Lab. (INL), Idaho Falls, ID (United States); Allen, Todd Randall [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hildebrandt, Philip Clay [Idaho National Lab. (INL), Idaho Falls, ID (United States); Baker, Suzanne Hobbs [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-09-01

The Nuclear Innovation Workshops were held at six locations across the United States on March 3-5, 2015. The data collected during these workshops has been analyzed and sorted to bring out consistent themes toward enhancing innovation in nuclear energy. These themes include development of a test bed and demonstration platform, improved regulatory processes, improved communications, and increased public-private partnerships. This report contains a discussion of the workshops and resulting themes. Actionable steps are suggested at the end of the report. This revision has a small amount of the data in Appendix C removed in order to avoid potential confusion.

The Astronomy Workshop

Science.gov (United States)

Hamilton, D. P.; Asbury, M. L.; Proctor, A.

2001-12-01

The Astronomy Workshop (http://janus.astro.umd.edu) is an interactive online astronomy resource developed, and maintained at the University of Maryland, for use by students, educators and the general public. The Astronomy Workshop has been extensively tested and used successfully at many different levels, including High School and Junior High School science classes, University introductory astronomy courses, and University intermediate and advanced astronomy courses. Some topics currently covered in the Astronomy Workshop are: Animated Orbits of Planets and Moons: The orbits of the nine planets and 91 known planetary satellites are shown in animated, to-scale drawings. The orbiting bodies move at their correct relative speeds about their parent, which is rendered as an attractive, to-scale gif image. Solar System Collisions: This most popular of our applications shows what happens when an asteroid or comet with user-defined size and speed impacts a given planet. The program calculates many effects, including the country impacted (if Earth is the target), energy of the explosion, crater size, magnitude of the planetquake generated. It also displays a relevant image (e.g. terrestrial crater, lunar crater, etc.). Planetary and Satellite Data Calculators: These tools allow the user to easily calculate physical data for all of the planets or satellites simultaneously, making comparison very easy. Orbital Simulations: These tools allow the student to investigate different aspects of the three-body problem of celestial mechanics. Astronomy Workshop Bulletin Board: Get innovative teaching ideas and read about in-class experiences with the Astronomy Workshop. Share your ideas with other educators by posting on the Bulletin Board. Funding for the Astronomy Workshop is provided by the National Science Foundation.

MR-2016 US-Japan Workshop on Magentic Reconnection Travel Support

Energy Technology Data Exchange (ETDEWEB)

Forest, Cary [Univ. of Wisconsin, Madison, WI (United States)

2017-06-12

The US-Japan workshop on Magnetic Reconnection (MR2016), was held in Napa California from March 7th through 11th, 2016. Details about the program, including invited speakers can be found here: (http://www.magneticreconnection.org/mr2016). Background: The MR Workshop is an international meeting that began in 2000 with its original focus on magnetic reconnection serving as a link between the research groups in US and Japan. Since then, the meeting has grown and is now recognized as one of the primary international workshops on magnetic reconnection. In its format, researchers from both the laboratory community and from the space research community have held 12 workshops bringing together the diverse researchers from the space and laboratory experimental fields. Plasma physics is the common language that ties together all scientists who study the waves, particle acceleration and heating, magnetic reconnection, dynamos, global and micro-stability of plasmas, magnetic turbulence and plasma’s transport problems. The meeting received $9,575 from the U.S. Dept. of Energy funding. This support was used to cover the registration fees ($575 per person) and accommodations for ten junior colleagues (graduate students and postdocs). Applications were solicited and then reviewed by the program committee based on recommendations from the applicants’ advisers.

Workshop on Accelerator Magnet Superconductors, Design and Optimization

CERN Document Server

WAMSDO Workshop

2009-01-01

This report contains the proceedings of the CARE-HHH-AMT Workshop on Accelerator Magnet Superconductors, Design and Optimization (WAMSDO) held at CERN from 19 to 23 May 2008. The needs in terms of superconducting magnets for the accelerator projects were discussed, mainly for the LHC interaction regions and injector upgrades, and for the GSI FAIR complex. The first part of the workshop focused on the development of superconductor and cables, i.e., low-loss Nb-Ti cables, Nb$_{3}$Sn and high-temperature superconductors. An industry session summarized the actual plans and status of the activities in the main European industries. Then, a worldwide status of the high field magnets programme was presented. A special session was devoted to fast cycled magnets, including FAIR facilities and LHC injector upgrades. A final session focused on the optimization methods and numerical tools for magnet design.

Report of On-Site Inspection Workshop-19

Energy Technology Data Exchange (ETDEWEB)

Sweeney, J. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2011-07-12

The objective of this workshop was to carry out discussions on the OSI Equipment List for the initial period techniques and to provide further contribution to the development of the OSI Equipment List. The report of the 36th session of WGB included guidance to develop corresponding concepts of operations for the equipment, identify logistics and infrastructure requirements, and to address software issues related to the equipment.

Workshop on decommissioning

International Nuclear Information System (INIS)

Broden, K.

2005-12-01

A Nordic workshop on decommissioning of nuclear facilities was held at Risoe in Denmark September 13-15, 2005. The workshop was arranged by NKS in cooperation with the company Danish Decommissioning, DD, responsible for decommissioning of nuclear facilities at Risoe. Oral presentations were made within the following areas: International and national recommendations and requirements concerning decommissioning of nuclear facilities Authority experiences of decommissioning cases Decommissioning of nuclear facilities in Denmark Decommissioning of nuclear facilities in Sweden Plans for decommissioning of nuclear facilities in Norway Plans for decommissioning of nuclear facilities in Finland Decommissioning of nuclear facilities in German and the UK Decommissioning of nuclear facilities in the former Soviet Union Results from research and development A list with proposals for future work within NKS has been prepared based on results from group-work and discussions. The list contains strategic, economical and political issues, technical issues and issues regarding competence and communication. (au)

Nuclear Energy Innovation Workshops. Executive Summary

Energy Technology Data Exchange (ETDEWEB)

Allen, Todd [Idaho National Lab. (INL), Idaho Falls, ID (United States); Jackson, John [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hildebrandt, Phil [Idaho National Lab. (INL), Idaho Falls, ID (United States); Baker, Suzy [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-06-01

The nuclear energy innovation workshops were organized and conducted by INL on March 2-4, 2015 at the five NUC universities and Boise State University. The output from these workshops is summarized with particular attention to final summaries that were provided by technical leads at each of the workshops. The current revision includes 3-4 punctuation corrections and a correction of the month of release from May to June.

Seeking the Tricorder: Report on Workshops on Advanced Technologies for Life Detection

Science.gov (United States)

Reiss-Bubenheim, D.; Boston, P. J.; Partridge, H.; Lindensmith, C.; Nadeau, J. L.

2017-12-01

There's great excitement about life prospects on icy fluid-containing moons orbiting our Solar System's gas giant planets, newly discovered planet candidates and continuing long-term interest in possible Mars life. The astrobiology/planetary research communities require advanced technologies to explore and study both Solar System bodies and exoplanets for evidence of life. The Tricorder Workshop, held at Ames Research Center May 19-20, 2017, explored technology topics focused on non-invasive or minimally invasive methods for life detection. The workshop goal was to tease out promising ideas for low TRL concepts for advanced life detection technologies that could be applied to the surface and near-subsurface of Mars and Ocean Worlds (such as Europa and Enceladus) dominated by icy terrain. The workshop technology focus centered on mid-to-far term instrument concepts or other enabling technologies (e.g. robotics, machine learning, etc.) primarily for landed missions, which could detect evidence of extant, extinct and/or "weird" life including the notion of "universal biosignatures". Emphasis was placed on simultaneous and serial sample measurements using a suite of instruments and technological approaches with planetary protection in mind. A follow-on workshop, held July 24 at Caltech, sought to develop a generic flowchart of in situ observations and measurements to provide sufficient information to determine if extant life is present in an environment. The process didn't require participant agreement as to definition of extant life, but instead developed agreement on necessary observations and instruments. The flowchart of measurements was designed to maximize the number of simultaneous observations on a single sample where possible, serializing where necessary, and finally dividing it into parts for the most destructive analyses at the end. Selected concepts from the workshops outlined in this poster provide those technology areas necessary to solicit and develop

Proceedings of the 1996 Windsor workshop on alternative fuels

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-10-01

This document contains information which was presented at the 1996 Windsor Workshop on Alternative Fuels. Topics include: international links; industry topics and infrastructure issues; propane; engine developments; the cleanliness of alternative fuels; heavy duty alternative fuel engines; California zev commercialization efforts; and in-use experience.

The 3d International Workshop on Computational Electronics

Science.gov (United States)

Goodnick, Stephen M.

1994-09-01

The Third International Workshop on Computational Electronics (IWCE) was held at the Benson Hotel in downtown Portland, Oregon, on May 18, 19, and 20, 1994. The workshop was devoted to a broad range of topics in computational electronics related to the simulation of electronic transport in semiconductors and semiconductor devices, particularly those which use large computational resources. The workshop was supported by the National Science Foundation (NSF), the Office of Naval Research and the Army Research Office, as well as local support from the Oregon Joint Graduate Schools of Engineering and the Oregon Center for Advanced Technology Education. There were over 100 participants in the Portland workshop, of which more than one quarter represented research groups outside of the United States from Austria, Canada, France, Germany, Italy, Japan, Switzerland, and the United Kingdom. There were a total 81 papers presented at the workshop, 9 invited talks, 26 oral presentations and 46 poster presentations. The emphasis of the contributions reflected the interdisciplinary nature of computational electronics with researchers from the Chemistry, Computer Science, Mathematics, Engineering, and Physics communities participating in the workshop.

PREFACE: 14th Latin American Workshop on Plasma Physics (LAWPP 2011)

Science.gov (United States)

Bilbao, Luis; Minotti, Fernando; Kelly, Hector

2012-06-01

These proceedings present the written contributions from participants of the Latin American Workshop on Plasma Physics (LAWPP), which was held in Mar del Plata, Argentina, on 20-25 November 2011. This was the 14th session of the series of LAWPP biennial meetings, which started in 1982. The five-day scientific program of LAWPP 2011 consisted of 32 talks and various poster sessions, with the participation of 135 researchers from Argentina, Brazil, Canada, Chile, Colombia, Mexico, Puerto Rico, USA, Venezuela, as well as others from Europe and Asia. In addition, a School on Plasma Physics and a Workshop on Industrial Applications of Plasma Technology (AITP) were organized together with the main meeting. The five-day School held in the week previous to the meeting was intended for young scientists starting their research in Plasma Physics. On the other hand, the objective of the AITP Workshop was to enhance regional academic and industrial cooperation in the field of plasma assisted surface technology. Topics addressed at LAWPP 2011 included space plasmas, dusty plasmas, nuclear fusion, non-thermal plasmas, basic plasma processes, plasma simulation and industrial plasma applications. This variety of subjects is reflected in these proceedings, which the editors hope will result in enjoyable and fruitful reading for those interested in Plasma Physics. It is a pleasure to thank the Institutions that sponsored the meeting, as well as all the participants and collaborators for making this meeting possible. The Editors Luis Bilbao, Fernando Minotti and Hector Kelly LAWPP participants Participants of the 14th Latin American Workshop on Plasma Physics, 20-25 November 2011, Mar del Plata, Argentina International Scientific Committee Carlos Alejaldre, Spain María Virginia Alves, Brazil Ibere Caldas, Brazil Luis Felipe Delgado-Aparicio, Peru Mayo Villagrán, Mexico Kohnosuke Sato, Japan Héctor Kelly, Argentina Edberto Leal-Quirós, Puerto Rico George Morales, USA Julio Puerta

Experience of a workshop on communication skills in health professional education

Directory of Open Access Journals (Sweden)

Khalid U Al-Umran

2009-01-01

Full Text Available Background: The teaching of communication skills is gaining increasing attention. However, the opportunities for faculty development are limited. This study highlights an attempt by the Medical Education Unit, King Fahd Hospital of the University, Al-Khobar, to raise the awareness of faculty to this vital area by organizing a one-day workshop. Method: A one-day workshop was organized to improve the awareness of the participants to the role of communication skills such as doctor-patient interaction, breaking bad news, counseling and conflict management. In all, 168 participants consisting of faculty members, interns and students, both male and female participated. The sessions included interactive lectures, video demonstrations and role play. Results: The feedback from the participants indicated that the objectives of the workshop were largely realized. The presentations by speakers were of high quality. However, the participants wanted more small group activities and video-demonstrations that were relevant to the local environment. Conclusion: By and large, the one-day workshop was found to be a practical model for an initial attempt to raise awareness. Further work is needed to organize more intensive workshops on specific issues related to communication skills.

Proceedings of the NASA workshop on atomic oxygen effects

International Nuclear Information System (INIS)

Brinza, D.E.

1987-06-01

A workshop was held to address the scientific issues concerning the effects of atomic oxygen on materials in the low Earth orbital (LEO) environment. The program included 18 invited speakers plus contributed posters covering topics such as LEO spaceflight experiments, interaction mechanisms, and atomic oxygen source development. Discussion sessions were also held to organize a test program to evaluate atomic oxygen exposure facilities. The key issues raised in the workshop were: (1) the need to develop a reliable predictive model of the effects of long-term exposure of materials to the LEO environment; (2) the ability of ground-based exposure facilities to provide useful data for development of durable materials; and (3) accurate determination of the composition of the LEO environment. These proceedings include the invited papers, the abstracts for the contributed posters, and an account of the test program discussion sessions

Developing a Diverse Professoriate - Preliminary Outcomes from a Professional Development Workshop for Underrepresented Minorities in the Geosciences

Science.gov (United States)

Houlton, H. R.; Keane, C. M.; Seadler, A. R.; Wilson, C. E.

2012-12-01

A professional development workshop for underrepresented minority, future and early-career faculty in the geosciences was held in April of 2012. Twenty seven participants traveled to the Washington DC metro area and attended this 2.5 day workshop. Participants' career levels ranged from early PhD students to Assistant Professors, and they had research interests spanning atmospheric sciences, hydrology, solid earth geoscience and geoscience education. Race and ethnicity of the participants included primarily African American or Black individuals, as well as Hispanic, Native American, Native Pacific Islanders and Caucasians who work with underrepresented groups. The workshop consisted of three themed sessions led by prestigious faculty members within the geoscience community, who are also underrepresented minorities. These sessions included "Guidance from Professional Societies," "Instructional Guidance" and "Campus Leadership Advice." Each session lasted about 3 hours and included a mixture of presentational materials to provide context, hands-on activities and robust group discussions. Two additional sessions were devoted to learning about federal agencies. For the morning session, representatives from USGS and NOAA came to discuss opportunities within each agency and the importance of promoting geoscience literacy with our participants. The afternoon session gave the workshop attendees the fortunate opportunity to visit NSF headquarters. Participants were welcomed by NSF's Assistant Director for Geosciences and took part in small group meetings with program officers within the Geosciences Directorate. Participants indicated having positive experiences during this workshop. In our post-workshop evaluation, the majority of participants revealed that they thought the sessions were valuable, with many finding the sessions extremely valuable. The effectiveness of each session had similar responses. Preliminary results from 17 paired sample t-tests show increased

Japan-IAEA Workshops on Advanced Safeguards for Future Nuclear Fuel Cycles

International Nuclear Information System (INIS)

Hoffheins, B.; Hori, M.; Suzuki, M.; Kuno, Y.; Kimura, N.; Naito, K.; Hosoya, M.; Khlebnikov, N.; Whichello, J.; Zendel, M.

2010-01-01

Beginning in 2007, the Japan Atomic Energy Agency (JAEA) and the International Atomic Energy Agency (IAEA) Department of Safeguards initiated a workshop series focused on advanced safeguards technologies for the future nuclear fuel cycle (NFC). The goals for these workshops were to address safeguards challenges, to share implementation experiences, to discuss fuel cycle plans and promising research and development, and to address other issues associated with safeguarding new fuel cycle facilities. Concurrently, the workshops also served to promote dialog and problem solving, and to foster closer collaborations for facility design and planning. These workshops have sought participation from IAEA Member States' support programmes (MSSP), the nuclear industry, R and D organizations, state systems of accounting and control (SSAC), regulators and inspectorates to ensure that all possible stakeholder views can be shared in an open process. Workshop presentations have covered, inter alia, national fuel cycle programs and plans, research progress in proliferation resistance (PR) and safeguardability, approaches for nuclear measurement accountancy of large material throughputs and difficult to access material, new and novel radiation detectors with increased sensitivity and automation, and lessons learned from recent development and operation of safeguards systems for complex facilities and the experiences of integrated safeguards (IS) in Japan. Although the title of the workshops presumes an emphasis on technology, participants recognized that early planning and organization, coupled with close cooperation among stakeholders, that is, through the application of 'Safeguards by Design' (SBD) processes that include nuclear safety and security coordination, 'Remote Inspections' and 'Joint-Use of Equipment (JUE)' would be required to enable more successful implementations of safeguards at future NFC facilities. The needs to cultivate the future workforce, effectively preserve

On the Cutting Edge: Workshops, Online Resources, and Community Development

Science.gov (United States)

Mogk, D. W.; Macdonald, H.; Manduca, C. A.; Tewksbury, B. J.; Fox, S.; Iverson, E. A. R.; Beane, R. J.; Mcconnell, D. A.; Wiese, K.; Wysession, M. E.

2014-12-01

On the Cutting Edge, funded by NSF since 2002, offers a comprehensive professional development program for geoscience faculty. The program includes an annual integrated in-person and virtual workshop series, has developed an extensive collection of peer-reviewed instructional activities and related online resources, and supports continuing community development through sponsorship of webinars, listservs, opportunities for community contributions, and dissemination of resources to keep faculty current in their science and pedagogic practices. On the Cutting Edge (CE) has offered more than 100 face-to-face and virtual workshops, webinars, journal clubs, and other events to more than 3000 participants. The award-winning website has more than 5000 pages including 47 modules on career management, pedagogy, and geoscience topics. It has more than 1800 instructional activities contributed by the community, the majority of which have been peer-reviewed. The website had more than one million visitors last year. We have worked to support a community in which faculty improve their teaching by designing courses using research-based methods to foster higher-order thinking, incorporate geoscience data, and address cognitive and affective aspects of learning as well as a community in which faculty are comfortable and successful in managing their careers. The program addresses the needs of faculty in all career stages at the full spectrum of institutions and covering the breadth of the geoscience curriculum. We select timely and compelling topics that attract different groups of participants. CE workshops are interactive, model best pedagogical practices, emphasize participant learning, provide opportunities for participants to share their knowledge and experience, provide high-quality resources, give participants time to reflect and to develop action plans, and help transform their ideas about teaching. On the Cutting Edge has had an impact on teaching based on data from national

Workshop on Analytical Methods in Statistics

CERN Document Server

Jurečková, Jana; Maciak, Matúš; Pešta, Michal

2017-01-01

This volume collects authoritative contributions on analytical methods and mathematical statistics. The methods presented include resampling techniques; the minimization of divergence; estimation theory and regression, eventually under shape or other constraints or long memory; and iterative approximations when the optimal solution is difficult to achieve. It also investigates probability distributions with respect to their stability, heavy-tailness, Fisher information and other aspects, both asymptotically and non-asymptotically. The book not only presents the latest mathematical and statistical methods and their extensions, but also offers solutions to real-world problems including option pricing. The selected, peer-reviewed contributions were originally presented at the workshop on Analytical Methods in Statistics, AMISTAT 2015, held in Prague, Czech Republic, November 10-13, 2015.

The AAAI-13 Conference Workshops

OpenAIRE

Agrawal, Vikas; Archibald, Christopher; Bhatt, Mehul; Bui, Hung; Cook, Diane J.; Cortés, Juan; Geib, Christopher; Gogate, Vibhav; Guesgen, Hans W.; Jannach, Dietmar; Johanson, Michael; Kersting, Kristian; Konidaris, George; Kotthoff, Lars; Michalowski, Martin

2013-01-01

The AAAI-13 Workshop Program, a part of the 27th AAAI Conference on Artificial Intelligence, was held Sunday and Monday, July 14–15, 2013 at the Hyatt Regency Bellevue Hotel in Bellevue, Washington, USA. The program included 12 workshops covering a wide range of topics in artificial intelligence, including Activity Context-Aware System Architectures (WS-13-05); Artificial Intelligence and Robotics Methods in Computational Biology (WS-13-06); Combining Constraint Solving with Mining and Lear...

Industrial Fuel Flexibility Workshop

Energy Technology Data Exchange (ETDEWEB)

none,

2006-09-01

On September 28, 2006, in Washington, DC, ITP and Booz Allen Hamilton conducted a fuel flexibility workshop with attendance from various stakeholder groups. Workshop participants included representatives from the petrochemical, refining, food and beverage, steel and metals, pulp and paper, cement and glass manufacturing industries; as well as representatives from industrial boiler manufacturers, technology providers, energy and waste service providers, the federal government and national laboratories, and developers and financiers.

10th Workshop on Self-Organizing Maps

CERN Document Server

Schleif, Frank-Michael; Kaden, Marika; Lange, Mandy

2014-01-01

The book collects the scientific contributions presented at the 10th Workshop on Self-Organizing Maps (WSOM 2014) held at the University of Applied Sciences Mittweida, Mittweida (Germany, Saxony), on July 2–4, 2014. Starting with the first WSOM-workshop 1997 in Helsinki this workshop focuses on newest results in the field of supervised and unsupervised vector quantization like self-organizing maps for data mining and data classification.   This 10th WSOM brought together more than 50 researchers, experts and practitioners in the beautiful small town Mittweida in Saxony (Germany) nearby the mountains Erzgebirge to discuss new developments in the field of unsupervised self-organizing vector quantization systems and learning vector quantization approaches for classification. The book contains the accepted papers of the workshop after a careful review process as well as summaries of the invited talks.   Among these book chapters there are excellent examples of the use of self-organizing maps in agriculture, ...

Clubes de Ciencia: Intensive science workshops in Mexico provide a unique opportunity for teaching, scientific and cultural exchange

Science.gov (United States)

Le Bras, I.; Rosengard, S.; Estefania, M.; Jinich, A.

2016-02-01

Clubes de Ciencia, which translates to "Science Clubs" is an initiative started by a group of graduate students at Harvard University in 2014 to encourage scientific exchange between the US and Mexico. These science clubs are one-week long intensive workshops taught by graduate students and/or postdocs on a subject of their choice in six Mexican cities. Instructors apply to teach a workshop by sending a proposal to the organizing committee, who is looking for workshops that emphasize hands-on, practical ideas. The instructors, primarily graduate students in the US, are paired with local co-instructors who assist and often co-teach the workshop. Local student participants, who are in their last two years of high school and the first two years of college, are selected based on their interest and enthusiasm. Each class has about 15-20 students, so that the classroom setting is intimate and interactive Sponsors, who fund instructor stipends, class supplies and program development, include the Mexican department of energy (SENER), the Mexican national science foundation (CONACYT), Harvard and MIT. Host universities also provide space and resources. In this presentation we focus on clubs that were taught in January 2015 on ocean physics and July 2015 on ocean chemistry, both taught in Ensenada, Baja California at the national autonomous university. Both workshops included a combination of data analysis, lectures, experiments and computational modeling. The ocean physics class was also recorded intermittently and is being used as a test case for an online course. The format provided an intensive teaching and networking experience and could be interesting to implement in other contexts.

Workshop on Women of Applied Mathematics: Research and Leadership

Energy Technology Data Exchange (ETDEWEB)

Dianne P. O' Leary; Tamara G. Kolda

2004-09-28

We held a two and a half day workshop on Women of Applied Mathematics: Research and Leadership at the University of Maryland in College Park, Maryland, October 8--10, 2003. The workshop provided a technical and professional forum for eleven senior women and twenty-four early-career women in applied mathematics. Each participant committed to an outreach activity and publication of a report on the workshop's web site. The final session of the workshop produced recommendations for future action.

Workshop on Accelerators for Heavy Ion Fusion: Summary Report of the Workshop

Energy Technology Data Exchange (ETDEWEB)

Seidl, P.A.; Barnard, J.J.

2011-04-29

The Workshop on Accelerators for Heavy Ion Fusion was held at Lawrence Berkeley National Laboratory May 23-26, 2011. The workshop began with plenary sessions to review the state of the art in HIF (heavy ion fusion), followed by parallel working groups, and concluded with a plenary session to review the results. There were five working groups: IFE (inertial fusion energy) targets, RF approach to HIF, induction accelerator approach to HIF, chamber and driver interface, ion sources and injectors.

Examining Science Teachers' Argumentation in a Teacher Workshop on Earthquake Engineering

Science.gov (United States)

Cavlazoglu, Baki; Stuessy, Carol

2018-02-01

The purpose of this study was to examine changes in the quality of science teachers' argumentation as a result of their engagement in a teacher workshop on earthquake engineering emphasizing distributed learning approaches, which included concept mapping, collaborative game playing, and group lesson planning. The participants were ten high school science teachers from US high schools who elected to attend the workshop. To begin and end the teacher workshop, teachers in small groups engaged in concept mapping exercises with other teachers. Researchers audio-recorded individual teachers' argumentative statements about the inclusion of earthquake engineering concepts in their concept maps, which were then analyzed to reveal the quality of teachers' argumentation. Toulmin's argumentation model formed the framework for designing a classification schema to analyze the quality of participants' argumentative statements. While the analysis of differences in pre- and post-workshop concept mapping exercises revealed that the number of argumentative statements did not change significantly, the quality of participants' argumentation did increase significantly. As these differences occurred concurrently with distributed learning approaches used throughout the workshop, these results provide evidence to support distributed learning approaches in professional development workshop activities to increase the quality of science teachers' argumentation. Additionally, these results support the use of concept mapping as a cognitive scaffold to organize participants' knowledge, facilitate the presentation of argumentation, and as a research tool for providing evidence of teachers' argumentation skills.

The Halden Reactor Project workshop on HAMMLAB 2000

International Nuclear Information System (INIS)

Sebok, Angelia L.; Grini, Rolf-Einar; Larsen, Marit; Ness, Eyvind; Soerensen, Aimar

1998-01-01

A workshop on HAMMLAB 2000 was organised in Halden, May 26-27, 1997. The purpose of the workshop was to discuss and make recommendations on requirements for the design of HAMMLAB 2000 and to discuss the future research agenda. The workshop began with several presentations summarising the status of the current HAMMLAB 2000 project. Three invited speakers with expertise in human-machine laboratories and simulators delivered presentations of their experiences. Later, the workshop was divided into five working groups that discussed the following issues in parallel: (1) Technical Studies, Research Agenda; (2) Human Factors Research Agenda; (3) Data Collection; (4) Synergy with Other Industries; (5) Virtual Reality. Each group produced specific recommendations that were summarised by the group's facilitator in a joint session of the workshop. This report summarises the presentation of the invited speakers, and the discussions and recommendations of the individual working groups. (author)

Workshop on iodine aspects of severe accident management. Summary and conclusions

International Nuclear Information System (INIS)

2000-03-01

Following a recommendation of the OECD Workshop on the Chemistry of Iodine in Reactor Safety held in Wuerenlingen (Switzerland) in June 1996 [Summary and Conclusions of the Workshop, Report NEA/CSNI/R(96)7], the CSNI decided to sponsor a Workshop on Iodine Aspects of Severe Accident Management, and their planned or effective implementation. The starting point for this conclusion was the realization that the consolidation of the accumulated iodine chemistry knowledge into accident management guidelines and procedures remained, to a large extent, to be done. The purpose of the meeting was therefore to help build a bridge between iodine research and the application of its results in nuclear power plants, with particular emphasis on severe accident management. Specifically, the Workshop was expected to answer the following questions: - what is the role of iodine in severe accident management? - what are the needs of the utilities? - how can research fulfill these needs? The Workshop was organized in Vantaa (Helsinki), Finland, from 18 to 20 May 1999, in collaboration with Fortum Engineering Ltd. It was attended by forty-six specialists representing fifteen Member countries and the European Commission. Twenty-eight papers were presented. These included four utility papers, representing the views of Electricite de France (EDF), Teollisuuden Voima Oy and Fortum Engineering Ltd (Finland), the Nuclear Energy Institute (USA), and Japanese utilities. The papers were presented in five sessions: - iodine speciation; - organic compound control; - iodine control; - modeling; - iodine management; A sixth session was devoted to a general discussion on iodine management under severe accident conditions. This report summarizes the content of the papers and the conclusions of the workshop

An Equal Employment Opportunity Sensitivity Workshop

Science.gov (United States)

Patten, Thomas H., Jr.; Dorey, Lester E.

1972-01-01

The equal employment opportunity sensitivity workshop seems to be a useful training device for getting an organization started on developing black and white change agents. A report on the establishment of such a workshop at the U.S. Army Tank Automotive Command (TACOM). Includes charts of design, characteristics, analysis of results, program…

Proceedings of the workshop on π, K, η-nucleon interactions

International Nuclear Information System (INIS)

1992-04-01

This workshop was held at the Research Center for Nuclear Physics, Osaka University, from February 18 to 20, 1991. This is the first attempt on this theme. The understanding of atomic nuclei as nucleon many body system is inseparable from the deeper understanding on the structures of nucleons and mesons and their interaction. It is considered that the physical experiment on medium energy atomic nuclei which is positively advanced at present in various places aims at the understanding of the hadron many body system of nucleons and mesons through the phenomena to which various degrees of freedom are related. This workshop is going to study on such hadron physics of atomic nuclei centering around the research including the elementary processes of various problems in the interactions of π and nuclei, K and nuclei and η and nuclei, taking the problems of the internal structures of hadrons themselves into the field of view. More than 50 people took part in the workshop, and also the reports from experiment side were carried out. In this book, 22 papers are collected. (K.I.)

8th International Workshop on Natural Computing

CERN Document Server

Hagiya, Masami

2016-01-01

This book highlights recent advances in natural computing, including biology and its theory, bio-inspired computing, computational aesthetics, computational models and theories, computing with natural media, philosophy of natural computing, and educational technology. It presents extended versions of the best papers selected from the “8th International Workshop on Natural Computing” (IWNC8), a symposium held in Hiroshima, Japan, in 2014. The target audience is not limited to researchers working in natural computing but also includes those active in biological engineering, fine/media art design, aesthetics, and philosophy.

Pedagogical workshops as a teaching and learning strategy: the hydrographic basic as a theme

Directory of Open Access Journals (Sweden)

Valéria Brumato Regina Fornazari

2017-08-01

Full Text Available Current research investigates the ideas and practices of a team of teachers of the Natural Sciences working in schools in the state of Paraná, Brazil, with regard to pedagogical workshops as teaching and learning strategies on Hydrographic Basin as theme. A continuous formation course was conducted on the theme, with data retrieved by a questionnaire applied prior to the course and after the development of workshops by the teachers. Films, recordings and descriptive memorials were analyzed according to content analysis. Results showed that teachers endeavored to problematize in the pedagogical workshops, coupled to teachers´ mediation to go beyond common sense. Students´ participation was the great progress mediated by workshops. On the other hand, interdisciplinarity and the problematization of teaching were the limiting presuppositions for their execution. The undertaking enhanced a better understanding of pedagogical workshops in the teaching of the sciences, with the need for greater investments in teachers´ continuous formation to enhance the development of teaching practices that attend to current demands in science teaching.

Report of workshop on energy

International Nuclear Information System (INIS)

Tsujimoto, Kazufumi; Nagai, Yasuki

2005-03-01

The Working Group on Energy (WG) was organized under International Union of Pure and Applied Physics (IUPAP). The WG has been considering problems on future energy supply and role of physics to solve the subjects. As one of activities of the WG, a Workshop on Energy was held on May 13, 2004 at Center for Promotion of Computational Science and Engineering, Japan Atomic Energy Research Institute (JAERI) in Tokyo hosted by IUPAP and co-hosted by JAERI and High Energy Accelerator Research Organization. The objectives of this workshop are to suggest active contributions of pure and applied physics field to the solution of the energy problem and to advance research and development (R and D) of future energy through the discussions about present status, problem and prospect of different energy development in the world and in Japan. This report records the summary of the Workshop and, abstracts and materials of 12 presentations. After the invited presentations about overview of energy problems in the world, in China and in Japan, R and D activities on the following four fields were presented; 'Research and Development of New Energy', 'Research and Development of Fusion', 'Prospect of Accelerator Driven System (ADS)', and 'Hydrogen Production, Storage and Transportation'. At the end of the workshop, possible role of physics for the current and future energy problem was discussed. It was recognized that the energy problem was not as simple as to be solved by one country, and hence the international collaboration became essential. The importance of the coordination with other fields, such as chemistry and material, was also emphasized. (author)

Workshop summary: Water as hazard and water as heritage

Science.gov (United States)

Bostenaru-Dan, Maria

2017-04-01

Rationale: In a changing climate, hydrological and meteorological hazards related to water provoke more and more losses. Water courses are also causing other types of hazards, as alluvionar soil deposits are raising vulnerability to earthquakes through the Mexico City effect. On the other hand, water itself is a vulnerable habitat. To deal with the later, living museums including acquaria are planned, to raise awareness to protect the ecological diversity of water and water sites. Protecting water sites can be, at times, also protection against water related hazards, as landscape architecture begun to recognise recently. Floodplains are an alternative to dams and dikes. This would be already enough to underline water as dual element, but the duality goes futher. Having to think about duality, we think of Chinese philosophy. Water (or the lack of it, as in drought) destroys life as a hazard, but gives life as well. To this symbology of giving life is connected to role of water as heritage, to building culture next to the water. Architecture of river and coastalscapes underline this. Leisure architecture is connected to this, and includes also architectural objects such as bathes. Workshop I was a two day workshop, first day presentations and second day study tours. The morning session included introduction of the topic and then in chronological order approaches from archaeology of water sites, Ottoman time, and late 19th century. The Ottoman time approach was connected to an initiative shown in the introduction, from riverbed to seashore. The 19th century presentation was on the villa Gamberaia, a villa of a Romanian princess in Italy, featured on the poster of the workshop. In the 1966 floods in Florence which have an anniversary this year it was used as a symbol to maintain the positive significance of water. Places in the villa garden also make reference to hazards, as the earthquake shaped water fountain behind. The second part of presentations featured the

Workshop Results: Teaching Geoscience to K-12 Teachers

Science.gov (United States)

Nahm, A.; Villalobos, J. I.; White, J.; Smith-Konter, B. R.

2012-12-01

A workshop for high school and middle school Earth and Space Science (ESS) teachers was held this summer (2012) as part of an ongoing collaboration between the University of Texas at El Paso (UTEP) and El Paso Community College (EPCC) Departments of Geological Sciences. This collaborative effort aims to build local Earth science literacy and educational support for the geosciences. Sixteen teachers from three school districts from El Paso and southern New Mexico area participated in the workshop, consisting of middle school, high school, early college high school, and dual credit faculty. The majority of the teachers had little to no experience teaching geoscience, thus this workshop provided an introduction to basic geologic concepts to teachers with broad backgrounds, which will result in the introduction of geoscience to many new students each year. The workshop's goal was to provide hands-on activities illustrating basic geologic and scientific concepts currently used in introductory geology labs/lectures at both EPCC and UTEP to help engage pre-college students. Activities chosen for the workshop were an introduction to Google Earth for use in the classroom, relative age dating and stratigraphy using volcanoes, plate tectonics utilizing the jigsaw pedagogy, and the scientific method as a think-pair-share activity. All activities where designed to be low cost and materials were provided for instructors to take back to their institutions. A list of online resources for teaching materials was also distributed. Before each activity, a short pre-test was given to the participants to gauge their level of knowledge on the subjects. At the end of the workshop, participants were given a post-test, which tested the knowledge gain made by participating in the workshop. In all cases, more correct answers were chosen in the post-test than the individual activity pre-tests, indicating that knowledge of the subjects was gained. The participants enjoyed participating in these

Report on the Third Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE3

Directory of Open Access Journals (Sweden)

Daniel S. Katz

2016-10-01

Full Text Available This report records and discusses the Third Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE3. The report includes a description of the keynote presentation of the workshop, which served as an overview of sustainable scientific software. It also summarizes a set of lightning talks in which speakers highlighted to-the-point lessons and challenges pertaining to sustaining scientific software. The final and main contribution of the report is a summary of the discussions, future steps, and future organization for a set of self-organized working groups on topics including developing pathways to funding scientific software; constructing useful common metrics for crediting software stakeholders; identifying principles for sustainable software engineering design; reaching out to research software organizations around the world; and building communities for software sustainability. For each group, we include a point of contact and a landing page that can be used by those who want to join that group’s future activities. The main challenge left by the workshop is to see if the groups will execute these activities that they have scheduled, and how the WSSSPE community can encourage this to happen.

Report on the Third Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE3)

Science.gov (United States)

Katz, Daniel S.; Choi, Sou-Cheng T.; Niemeyer, Kyle E.; Hetherington, James; Löffler, Frank; Gunter, Dan; Idaszak, Ray; Brandt, Steven R.; Miller, Mark A.; Gesing, Sandra; Jones, Nick D.; Weber, Nic; Marru, Suresh; Allen, Gabrielle; Penzenstadler, Birgit; Venters, Colin C.; Davis, Ethan; Hwang, Lorraine; Todorov, Ilian; Patra, Abani; de Val-Borro, Miguel

2016-02-01

This report records and discusses the Third Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE3). The report includes a description of the keynote presentation of the workshop, which served as an overview of sustainable scientific software. It also summarizes a set of lightning talks in which speakers highlighted to-the-point lessons and challenges pertaining to sustaining scientific software. The final and main contribution of the report is a summary of the discussions, future steps, and future organization for a set of self-organized working groups on topics including developing pathways to funding scientific software; constructing useful common metrics for crediting software stakeholders; identifying principles for sustainable software engineering design; reaching out to research software organizations around the world; and building communities for software sustainability. For each group, we include a point of contact and a landing page that can be used by those who want to join that group's future activities. The main challenge left by the workshop is to see if the groups will execute these activities that they have scheduled, and how the WSSSPE community can encourage this to happen.

Workshop on electronuclear physics with internal targets: Proceedings

International Nuclear Information System (INIS)

Arnold, R.G.; Minehart, R.C.

1987-05-01

The Workshop on Electronuclear Physics with Internal Targets was held at SLAC on January 5-8, 1987. The idea for this workshop grew out of interest among physicists at SLAC and MIT/Bates who have been exploring the possibilities for internal targets in the PEP ring at SLAC and in a proposed stretcher ring at MIT/Bates. The aim of the workshop was to bring together physicists from these groups and from other laboratories and universities to discuss the new physics that could be made accessible with internal targets, and to share information on recent developments in internal target technology, on the impact of internal targets on ring operation, and on the detector requirements. The workshop was sponsored by NPAS, the program of Nuclear Physics at SLAC, and it was attended by more than 100 physicists from the US, Canada, Europe, and Japan. The workshop sessions began with two days of invited talks followed by two days of shorter presentations organized by the chairmen of four Working Groups. Written versions of all the plenary talks and all but four of the Working Group talks are presented here

Workshop on electronuclear physics with internal targets: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Arnold, R.G.; Minehart, R.C. (eds.)

1987-05-01

The Workshop on Electronuclear Physics with Internal Targets was held at SLAC on January 5-8, 1987. The idea for this workshop grew out of interest among physicists at SLAC and MIT/Bates who have been exploring the possibilities for internal targets in the PEP ring at SLAC and in a proposed stretcher ring at MIT/Bates. The aim of the workshop was to bring together physicists from these groups and from other laboratories and universities to discuss the new physics that could be made accessible with internal targets, and to share information on recent developments in internal target technology, on the impact of internal targets on ring operation, and on the detector requirements. The workshop was sponsored by NPAS, the program of Nuclear Physics at SLAC, and it was attended by more than 100 physicists from the US, Canada, Europe, and Japan. The workshop sessions began with two days of invited talks followed by two days of shorter presentations organized by the chairmen of four Working Groups. Written versions of all the plenary talks and all but four of the Working Group talks are presented here.

Ergonomic workplace assessment in orthotic and prosthetic workshops.

Science.gov (United States)

Salmani Nodooshan, H; Koohi Booshehri, S; Daneshmandi, H; Choobineh, A R

2016-10-17

In Iranian orthotic and prosthetic workshops, the majority of activities are carried out by manpower and the tasks are labor-intensive. In these workshops, ergonomic aspects of working conditions are seldom considered. This study was conducted in orthotic and prosthetic workshops with the objectives of determination of prevalence rate of MSDs among employees and assessment of ergonomics working conditions. In this cross-sectional study, all employees (n = 42; 29 males and 13 females) in 11 active orthotic and prosthetic production centers of Shiraz city participated. Data were collected using Nordic Musculoskeletal disorders Questionnaire (NMQ) and observational technique by an ergonomics checklist for assessment of working conditions. The means (SD) of age and job tenure (years) in the study individuals were 37.26 (10.21) and 12.8 (9.39), respectively. The most prevalent MSD symptoms in the past 12 months were reported in the lower back (42.9%), shoulders (40.5%) and knees (40.5%). Working conditions assessment showed that the main ergonomic problems in the workshops studied originated from awkward working posture, improper workstation design, poorly designed hand tools and incorrect manual material handling. Any interventional program for working conditions improvement should, therefore, focus on these areas.

Workshop on low energy neutrino physics

International Nuclear Information System (INIS)

2009-01-01

The main topics of the workshop are: the determination of the neutrino mixing angle theta-13, the experiments concerning the monitoring of reactors based on the measurement of neutrino spectra, solar neutrinos, supernovae neutrinos, geo-neutrinos, neutrino properties, neutrinoless double beta decay and future low energy neutrino detectors. This document gathers together the program of the workshop, the slides of the presentations, some abstracts and some posters

Evaluation of workshops on healing through multicultural counseling ...

African Journals Online (AJOL)

Evaluation of workshops on healing through multicultural counseling: Sport psychology implications. ... Healing through multicultural counselling workshops were conducted at universities in South Africa and ... AJOL African Journals Online.

ES12; The 24th Annual Workshop on Recent Developments in Electronic Structure Theory

Energy Technology Data Exchange (ETDEWEB)

Holzwarth, Natalie [Wake Forest Univ., Winston-Salem, NC (United States); Thonhauser, Timo [Wake Forest Univ., Winston-Salem, NC (United States); Salam, Akbar [Wake Forest Univ., Winston-Salem, NC (United States)

2012-06-29

ES12: The 24th Annual Workshop on Recent Developments in Electronic Structure Theory was held June 5-8, 2012 at Wake Forest University in Winston-Salem, NC 27109. The program consisted of 24 oral presentations, 70 posters, and 2 panel discussions. The attendance of the Workshop was comparable to or larger than previous workshops and participation was impressively diverse. The 136 participants came from all over the world and included undergraduate students, graduate students, postdoctoral researchers, and senior scientists. The general assessment of the Workshop was extremely positive in terms of the high level of scientific presentations and discussions, and in terms of the schedule, accommodations, and affordability of the meeting.

Dynamic defense workshop :

Energy Technology Data Exchange (ETDEWEB)

Crosby, Sean Michael; Doak, Justin E.; Haas, Jason Juedes.; Helinski, Ryan; Lamb, Christopher C.

2013-02-01

On September 5th and 6th, 2012, the Dynamic Defense Workshop: From Research to Practice brought together researchers from academia, industry, and Sandia with the goals of increasing collaboration between Sandia National Laboratories and external organizations, de ning and un- derstanding dynamic, or moving target, defense concepts and directions, and gaining a greater understanding of the state of the art for dynamic defense. Through the workshop, we broadened and re ned our de nition and understanding, identi ed new approaches to inherent challenges, and de ned principles of dynamic defense. Half of the workshop was devoted to presentations of current state-of-the-art work. Presentation topics included areas such as the failure of current defenses, threats, techniques, goals of dynamic defense, theory, foundations of dynamic defense, future directions and open research questions related to dynamic defense. The remainder of the workshop was discussion, which was broken down into sessions on de ning challenges, applications to host or mobile environments, applications to enterprise network environments, exploring research and operational taxonomies, and determining how to apply scienti c rigor to and investigating the eld of dynamic defense.

Proceedings of the workshop on applied mathematics

Energy Technology Data Exchange (ETDEWEB)

Lee, H C; Couture, M; Douglas, S; Leivo, H P

1992-10-01

The Workshop on Applied Mathematics was held at the Cockcroft Centre, Deep River, Ontario, 1992 February 7-8. The purpose of the workshop was to provide a forum for applied mathematicians to survey the use and to discuss the future of applied mathematics at AECL Research. There were 57 participants at the workshop A total of eight 30-minute and 25 15-minute talks were presented describing mathematical techniques used in the whole range of activities at AECL Research, from numerical simulation of fluid flow through eddy current testing to quantum algebra and accelerator physics.

Proceedings of the workshop on applied mathematics

International Nuclear Information System (INIS)

Lee, H.C.; Couture, M.; Douglas, S.; Leivo, H.P.

1992-10-01

The Workshop on Applied Mathematics was held at the Cockcroft Centre, Deep River, Ontario, 1992 February 7-8. The purpose of the workshop was to provide a forum for applied mathematicians to survey the use and to discuss the future of applied mathematics at AECL Research. There were 57 participants at the workshop A total of eight 30-minute and 25 15-minute talks were presented describing mathematical techniques used in the whole range of activities at AECL Research, from numerical simulation of fluid flow through eddy current testing to quantum algebra and accelerator physics

Workshop on Physics Beyond Colliders

CERN Document Server

2016-01-01

The aim of the workshop is to explore the opportunities offered by the CERN accelerator complex and infrastructure to get new insights into some of today's outstanding questions in particle physics through projects complementary to high-energy colliders and other initiatives in the world. The focus is on fundamental physics questions that are similar in spirit to those addressed by high-energy colliders, but that may require different types of experiments. The kick-off workshop is intended to stimulate new ideas for such projects, for which we encourage the submission of abstracts.

Hands-on-Science: Using Education Research to Construct Learner-Centered Classes

Science.gov (United States)

Ludwig, R. R.; Chimonidou, A.; Kopp, S.

2014-07-01

Research into the process of learning, and learning astronomy, can be informative for the development of a course. Students are better able to incorporate and make sense of new ideas when they are aware of their own prior knowledge (Resnick et al. 1989; Confrey 1990), have the opportunity to develop explanations from their own experience in their own words (McDermott 1991; Prather et al. 2004), and benefit from peer instruction (Mazur 1997; Green 2003). Students in astronomy courses often have difficulty understanding many different concepts as a result of difficulties with spatial reasoning and a sense of scale. The Hands-on-Science program at UT Austin incorporates these research-based results into four guided-inquiry, integrated science courses (50 students each). They are aimed at pre-service K-5 teachers but are open to other majors as well. We find that Hands-on-Science students not only attain more favorable changes in attitude towards science, but they also outperform students in traditional lecture courses in content gains. Workshop Outcomes: Participants experienced a research-based, guided-inquiry lesson about the motion of objects in the sky and discussed the research methodology for assessing students in such a course.

Summary of the Workshop on Neutron Cross Section Covariances

International Nuclear Information System (INIS)

Smith, Donald L.

2008-01-01

A Workshop on Neutron Cross Section Covariances was held from June 24-27, 2008, in Port Jefferson, New York. This Workshop was organized by the National Nuclear Data Center, Brookhaven National Laboratory, to provide a forum for reporting on the status of the growing field of neutron cross section covariances for applications and for discussing future directions of the work in this field. The Workshop focused on the following four major topical areas: covariance methodology, recent covariance evaluations, covariance applications, and user perspectives. Attention was given to the entire spectrum of neutron cross section covariance concerns ranging from light nuclei to the actinides, and from the thermal energy region to 20 MeV. The papers presented at this conference explored topics ranging from fundamental nuclear physics concerns to very specific applications in advanced reactor design and nuclear criticality safety. This paper provides a summary of this workshop. Brief comments on the highlights of each Workshop contribution are provided. In addition, a perspective on the achievements and shortcomings of the Workshop as well as on the future direction of research in this field is offered

14th International Workshop on Slow Positron Beam Techniques and Applications

International Nuclear Information System (INIS)

2017-01-01

These proceedings arose from the 14th International Workshop on Slow Positron Beam Techniques (SLOPOS14), which was held at Kunibiki Messe, Matsue, Shimane prefecture, Japan, from the 22nd—27th May 2016. Meetings in the SLOPOS series are held every three years. The SLOPOS workshop series has traditionally been devoted to investigations on the production of positron and positronium beams, their fundamental physics and chemistry, and their applications to materials such as metals, semiconductors and soft matter. During the workshop numerous applications using positron and positronium beams were also presented, clearly demonstrating the usefulness of such beams to the determination of surface structure, defect characterization as well as to fundamental scientific studies. For SLOPOS14 the main subjects of the workshop included the following: • Positron transport and beam technology • Pulsed positron beams and positron traps • Defect profiling in bulk and layered structures • Nano structures, porous materials and thin films • Surface and interface analysis • Positronium formation, emission and beams • Positron and positronium interactions with atoms and molecules • Many positrons and anti-hydrogen • Improvement of experimental techniques 106 delegates from 14 countries participated in the SLOPOS14, including 31 student delegates, which was a most encouraging sign for the future. The scientific program comprised 5 plenary talks, 22 invited talks, 32 contributed talks and 46 posters presented during two poster sessions. Student prizes were awarded for the best presented scientific contributions by 4 students from University of College London, Universität der Bundeswehr München and The University of Tokyo. On a sad note, delegates paid tribute to the contributions of our recently deceased colleagues, Prof. A. Seeger, Prof. R.N. West, Prof. T.C. Griffith, and Prof. Z. Tang. Memorial talks were given and a one minute silence was observed before the

2003 RIA R AND D WORKSHOP.

Energy Technology Data Exchange (ETDEWEB)

OZAKI, S.ET AL.

2003-08-26

The 2003 RIA R&D Workshop was held on August 26-28, 2003 at the Four Points Sheraton Hotel in Bethesda, Maryland. This Workshop was chaired by Satoshi Ozaki of BNL and sponsored by the Nuclear Physics Division of DOE, with the help of Oak Ridge Institute for Science and Education (ORISE). The purpose of this workshop was to understand the present status of R&D efforts for RIA, to evaluate the needs for further R&D, and to identify opportunities for international collaborations. The workshop examined and documented the current pre-conceptual design for RIA, identifying areas where decisions on technical options remain. The status of the current RIA R&D program was documented, recognizing areas where efforts were needed in light of what had been learned. The ongoing and planned R&D activities for operating and planned rare-isotope facilities were presented, enabling the workshop to be a venue to develop coordinated R&D efforts of mutual benefit to U.S. and international efforts. The scientific program for the first day (August 26, 2003) consisted mostly of invited talks presented by major research groups involved in RIA and other RI beam facilities. The talks included those covering: Science of RIA and the RIA Facility Performance Requirements; The Reference RIA Facility Pre-CDR design that was used for the NSAC cost exercise (M. Harrison Sub-Panel) in January 2001; New or latest perspectives on the RIA design at ANL & MSU; and RI Beam facility plans and overview of the R&D activities at overseas laboratories. The second day (August 27, 2003) was devoted to contributed talks on continuing R&D, including that which had been supported by DOE RIA R&D funds. The third day (August 28, 2003) began with open panel discussions in the morning, including further input from participants. The panel members discussed the present status of the RIA planning and R&D needs in a closed session for the rest of the day, and then worked on report planning and writing. This Workshop

Summary Report of a Specialized Workshop on Nuclear Structure and Decay Data (NSDD) Evaluations

Energy Technology Data Exchange (ETDEWEB)

Nichols, Alan L. [Univ. of Surrey, Guildford (United Kingdom); Dimitrious, P. [IAEA Nuclear Data Section, Vienna (Austria); Kondev, F. G. [Argonne National Lab. (ANL), Argonne, IL (United States); Ricard-McCutchan, E. [Brookhaven National Lab. (BNL), Upton, NY (United States)

2015-04-27

A three-day specialised workshop on Nuclear Structure and Decay Data Evaluations was organised and held at the headquarters of the International Atomic Energy Agency in Vienna, Austria, from 27 to 29 April 2015. This workshop covered a wide range of important topics and issues addressed when evaluating and maintaining the Evaluated Nuclear Structure Data File (ENSDF). The primary aim was to improve evaluators’ abilities to identify and understand the most appropriate evaluation processes to adopt in the formulation of individual ENSDF data sets. Participants assessed and reviewed existing policies, procedures and codes, and round-table discussions included the debate and resolution of specific difficulties experienced by ENSDF evaluators (i.e., all workshop participants). The contents of this report constitute a record of this workshop, based on the presentations and subsequent discussions.

Summary Report of a Specialized Workshop on Nuclear Structure and Decay Data (NSDD) Evaluations

International Nuclear Information System (INIS)

Nichols, Alan L.; Dimitrious, P.; Kondev, F. G.; Ricard-McCutchan, E.

2015-01-01

A three-day specialised workshop on Nuclear Structure and Decay Data Evaluations was organised and held at the headquarters of the International Atomic Energy Agency in Vienna, Austria, from 27 to 29 April 2015. This workshop covered a wide range of important topics and issues addressed when evaluating and maintaining the Evaluated Nuclear Structure Data File (ENSDF). The primary aim was to improve evaluators' abilities to identify and understand the most appropriate evaluation processes to adopt in the formulation of individual ENSDF data sets. Participants assessed and reviewed existing policies, procedures and codes, and round-table discussions included the debate and resolution of specific difficulties experienced by ENSDF evaluators (i.e., all workshop participants). The contents of this report constitute a record of this workshop, based on the presentations and subsequent discussions.

Workshop on electroweak symmetry breaking: proceedings

International Nuclear Information System (INIS)

Hinchliffe, I.

1984-10-01

A theoretical workshop on electroweak symmetry breaking at the Superconducting Supercollider was held at Lawrence Berkeley Laboratory, June 4-22, 1984. The purpose of the workshop was to focus theoretical attention on the ways in which experimentation at the SSC could reveal manifestations of the phenomenon responsible for electroweak symmetry breaking. This issue represents, at present, the most compelling scientific argument for the need to explore the energy region to be made accessible by the SSC, and a major aim of the workshop was to involve a broad cross section of particle theorists in the ongoing process of sharpening the requirements for both accelerator and detector design that will ensure detection and identification of meaningful signals, whatever form the electroweak symmetry breaking phenomenon should actually take. Separate entries were prepared for the data base for the papers presented

Workshop on electroweak symmetry breaking: proceedings

Energy Technology Data Exchange (ETDEWEB)

Hinchliffe, I. (ed.)

1984-10-01

A theoretical workshop on electroweak symmetry breaking at the Superconducting Supercollider was held at Lawrence Berkeley Laboratory, June 4-22, 1984. The purpose of the workshop was to focus theoretical attention on the ways in which experimentation at the SSC could reveal manifestations of the phenomenon responsible for electroweak symmetry breaking. This issue represents, at present, the most compelling scientific argument for the need to explore the energy region to be made accessible by the SSC, and a major aim of the workshop was to involve a broad cross section of particle theorists in the ongoing process of sharpening the requirements for both accelerator and detector design that will ensure detection and identification of meaningful signals, whatever form the electroweak symmetry breaking phenomenon should actually take. Separate entries were prepared for the data base for the papers presented.

Towards the design of a prosthetic underactuated hand

Directory of Open Access Journals (Sweden)

T. Laliberté

2010-12-01

Full Text Available This paper presents recent advances in the design of an underactuated hand for applications in prosthetics. First, the design of the fingers is addressed. Based on previous experiments with prototypes developed in the past, new tendon routings are proposed that lead to a more effective transmission of the forces. A novel elastic tendon routing is also proposed for the passive opening of the hand. A simplified static analysis of the fingers is proposed to support the results. Then, a new kinematic design of the thumb is presented. The thumb is designed to perform out-of-the-plane motions in order to broaden the variety of possible grasps. A mechanism for the implementation of underactuation between the fingers is proposed that alleviates the friction problems encountered in earlier hand designs. Finally, a prototype of the hand is briefly described and typical grasps are shown.

This paper was presented at the IFToMM/ASME International Workshop on Underactuated Grasping (UG2010, 19 August 2010, Montréal, Canada.

The 2008 ICOH Workshop on Skin Notation

DEFF Research Database (Denmark)

Sartorelli, P; Ahlers, H W; Cherrie, J W

2010-01-01

BACKGROUND: On 29 March 2008 the International Commission on Occupational Health (ICOH) Scientific Committee on Occupational and Environmental Dermatoses organized a Skin Notation Workshop hosted by the 11th International Percutaneous Penetration Perspectives Conference (La Grande Motte, France...... assignment criteria and the attempts to improve the S system made by various international and governmental agencies. A position paper was subsequently published. OBJECTIVES: The workshop in France was a continuation of this activity with the aim of evaluating how the different strategies can improve S....... METHODS AND DISCUSSION: The Workshop was divided into two sessions. The first was dedicated to lectures focused on different aspects of S. In the second session participants discussed key issues with the aim of exploring the actions needed to improve international S. systems....

Eighth Workshop on Crystalline Silicon Solar Cell Materials and Processes; Summary Discussion Sessions

International Nuclear Information System (INIS)

Sopori, B.; Swanson, D.; Sinton, R.; Stavola, M.; Tan, T.

1998-01-01

This report is a summary of the panel discussions included with the Eighth Workshop on Crystalline Silicon Solar Cell Materials and Processes. The theme of the workshop was ''Supporting the Transition to World Class Manufacturing.'' This workshop provided a forum for an informal exchange of information between researchers in the photovoltaic and nonphotovoltaic fields on various aspects of impurities and defects in silicon, their dynamics during device processing, and their application in defect engineering. This interaction helped establish a knowledge base that can be used for improving device-fabrication processes to enhance solar-cell performance and reduce cell costs. It also provided an excellent opportunity for researchers from industry and universities to recognize mutual needs for future joint research

Proceedings of the Santa Fe workshop on electron effects

International Nuclear Information System (INIS)

Wang, T.S.; Jason, A.

1998-01-01

The Workshop was held under the sponsorship of the Spallation Neutron Source (SNS) Project to further project understanding of the effects and cause of the presence of electrons in proton accelerators. In particular, the fast instability seen in the Los Alamos Proton Storage Ring was the major topic of discussion since it limits the particles/pulse to the LANSCE target and could have an impact on the SNS Ring. This instability is believed due to the interaction of trapped electrons in the accumulated beam, i.e., an electron-proton or e-p instability. The first day of the workshop was occupied by invited talks that included a review of e-p instability theory, an overview of PSR observations, observations at other laboratories, reviews of electron-production mechanisms, theoretical studies on the PSR instability, and design issues of the SNS ring. For the second day, the workshop was organized into three working groups: a theory and computation group, a past-experiences and proposed-experiments group, and the SNS-design-strategy group. Their charter was to summarize previous work in their respective areas and to originate a course for future progress. The results of the working groups and the workshop were summarized in a joint session during the morning of the third day. These proceedings are a simple collection of the viewgraphs used as submitted to a member of the LANL secretarial staff by speakers

Fourteenth workshop geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Miller, F.G.; Brigham, W.E.; Cook, J.W.

1989-01-01

The Fourteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 24--26, 1989. Major areas of discussion include: (1) well testing; (2) various field results; (3) geoscience; (4) geochemistry; (5) reinjection; (6) hot dry rock; and (7) numerical modelling. For these workshop proceedings, individual papers are processed separately for the Energy Data Base.

Fourteenth workshop geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Miller, F.G.; Brigham, W.E.; Cook, J.W.

1989-12-31

The Fourteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 24--26, 1989. Major areas of discussion include: (1) well testing; (2) various field results; (3) geoscience; (4) geochemistry; (5) reinjection; (6) hot dry rock; and (7) numerical modelling. For these workshop proceedings, individual papers are processed separately for the Energy Data Base.

Workshop on Advanced Modelling in Mathematical Finance : in Honour of Ernst Eberlein

CERN Document Server

Papapantoleon, Antonis

2016-01-01

This Festschrift resulted from a workshop on “Advanced Modelling in Mathematical Finance” held in honour of Ernst Eberlein’s 70th birthday, from 20 to 22 May 2015 in Kiel, Germany. It includes contributions by several invited speakers at the workshop, including several of Ernst Eberlein’s long-standing collaborators and former students. Advanced mathematical techniques play an ever-increasing role in modern quantitative finance. Written by leading experts from academia and financial practice, this book offers state-of-the-art papers on the application of jump processes in mathematical finance, on term-structure modelling, and on statistical aspects of financial modelling. It is aimed at graduate students and researchers interested in mathematical finance, as well as practitioners wishing to learn about the latest developments.

Second ANS workshop on the safety of Soviet-designed nuclear power plants. Summary report

International Nuclear Information System (INIS)

Bari, R.A.

1995-03-01

The Second American Nuclear Society Workshop on the Safety of Soviet-Designed Nuclear Power Plants was held in Washington, DC, in November, 1994. The Workshop consisted of both plenary sessions and working sessions with three hundred participants overall. All countries with operating Soviet-Designed nuclear power plants were represented and representatives from several other countries also participated. In addition to the status and plans related to technical issues, the Workshop also included discussions of economic, political, legal, and social issues as they relate to the safety of these nuclear power plants

Proceedings of the 13. International Workshop on Inspection Practices. 13. International Nuclear Regulatory Inspection Workshop, 17-21 April 2016, Bruges, Belgium

International Nuclear Information System (INIS)

Bens, Jan; De Boeck, Benoit; Wertelaers, An; Van Haesendonck, Michel; Barras, Pierre; Leblanc, Alexandre; Regan, Christopher; Smith, Paul; Kupila, Jukka; Crespo, Julio; Meskens, Gaston; Schneider, Matthias

2017-01-01

. The complete compilation of questionnaire responses is contained in the appendix (NEA-CNRA-R--2016-2-ADD1) to this document. Approximately 57 participants from 18 different countries and one participant from the IAEA took part in the workshop. Six discussion groups were established for the breakout sessions. Each group consisted of inspectors from countries to ensure diversity of views for each of the topics. Discussion groups met for three separate sessions on one topic. The exchange between participants was open and active, and the groups formulated conclusions and identified CPs. Evaluation of the workshop results were based on questionnaire responses received from the participants at the closing of the workshop. The evaluation showed that, as in the past workshops, the highest value perceived, was in meeting and exchanging information with inspectors from other organisations. Responses also showed that the format selected was highly favoured and that more workshops of this type are supported in the future. The results of the evaluation also reflected that participants in exchanging information were provided a unique opportunity to 'calibrate' their own inspection methods against those from other countries. While exchanging inspection practices and learning new ideas were part of the main objectives, this opportunity to recognise and understand commonalties and differences is equally important. Overall discussions between the various participants both in discussion group sessions and throughout the workshop were extensive and meaningful. Ideas and practices regarding regulatory inspection activities were exchanged and it can be foreseen that these ideas will provide improved expertise when being applied in the future. Various and complementary points of view were expressed. The workshop conclusions include observations and CPs for each of the three topics that were developed by the discussions groups

Workshop on gravitational waves and relativistic astrophysics

Indian Academy of Sciences (India)

Discussions related to gravitational wave experiments viz. LIGO and LISA as well as to observations of supermassive black holes dominated the workshop sessions on gravitational waves and relativistic astrophysics in the ICGC-2004. A summary of seven papers that were presented in these workshop sessions has been ...

Abstract Book of the NKS Workshop on Radioanalytical Chemistry

Energy Technology Data Exchange (ETDEWEB)

Hou, X. [Technical Univ. of Denmark. DTU Nutech, Risoe Campus, Roskilde (Denmark)

2013-09-15

This report compiled all abstracts presented in the NKS Workshop on Radioanalytical Chemistry at Risoe, Roskilde, Denmark in 2-6{sup th} Sept. 2013. Total 35 participants registered to the workshop, among them 18 from Sweden, 5 from Denmark, 3 from Finland, and 3 from Norway, there are also 6 participants from Germany, France, Slovenia, Korea, Turkey, and China. The workshop consists two part, 3 days lab practices and 2 days lectures/presentation. 3 lab practices were organized, i.e. (1) Radiochemical separation of Pu and ICP-MS measurement of Pu isotopes; (2) Radiochemical separation of {sup 210}Po and {sup 226}Ra and their alpha spectrometry measurement; and (3) Radiochemical separation of {sup 55}Fe, {sup 63}Ni, {sup 90}Sr and their LSC measurement. Among them, each participant can participate in 2 lab practices. 15 invited lectures are given by the experts in their specific fields, 8 oral and 6 poster presentations are given by the participants. The abstracts of all presentations are included in this report. (Author)

Workshop on CEBAF at higher energies

Energy Technology Data Exchange (ETDEWEB)

Isgur, N.; Stoler, P. [eds.

1994-04-01

Since the current parameters of CEBAF were defined almost a decade ago, there has been a remarkably fruitful evolution of our picture of the behavior of strongly interacting matter that apparently could be addressed by CEBAF at higher energies. Favorable technical developments coupled with foresight in initial laboratory planning have now made it feasible to consider approximately doubling CEBAF`s current design energy of 4 GeV to approach 10 GeV at rather modest cost. The purpose of the workshop, sponsored by the CEBAF User Group, was to begin to develop the next phase of CEBAF`s program by giving the entire community the opportunity to participate in defining the future of our field, and in particular the physics accessible with an upgraded CEBAF energy. It is intended that this report mark the first step toward an ultimate goal of defining a physics program that will form the basis for an upgrade of CEBAF. The report begins with a brief overview of the workshop`s conclusions. Its body consists of sections corresponding to the workshop`s Working Groups on Hadron Spectroscopy and Production, High Q{sup 2} Form Factors and Exclusive Reactions, Inclusive and Semi-Inclusive Processes, and Hadrons in the Nuclear Medium. Each section begins with the working group summaries and is followed by associated plenary talks summarizing the outstanding physics issues addressable by an upgrade, which are in turn followed by individual contributions presenting specific physics programs. An appendix describes capabilities of CEBAF`s current experimental equipment at higher energies; another appendix lists workshop participants. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

Workshop on automated beam steering and shaping (ABS). Proceedings

Energy Technology Data Exchange (ETDEWEB)

Lindroos, M [ed.

1999-09-10

A workshop on Automated Beam Steering and Shaping (ABS) was held at CERN in December 1998. This was the first workshop dedicated to this subject. The workshop had two major goals: to review the present status of ABS algorithms and systems around the world and to create a worldwide ABS community. These proceedings contain summary reports from all sessions, contributions from several presentations held at the workshop, and a complete set of abstracts for all presentations. (orig.)

Workshop on automated beam steering and shaping (ABS). Proceedings

International Nuclear Information System (INIS)

Lindroos, M.

1999-01-01

A workshop on Automated Beam Steering and Shaping (ABS) was held at CERN in December 1998. This was the first workshop dedicated to this subject. The workshop had two major goals: to review the present status of ABS algorithms and systems around the world and to create a worldwide ABS community. These proceedings contain summary reports from all sessions, contributions from several presentations held at the workshop, and a complete set of abstracts for all presentations. (orig.)

Proceedings of the 1998 workshop on the utilization of research reactors

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-10-01

The 1998 Workshop on the Utilization of Research Reactors, which is the seventh Workshop on the theme of research reactor utilization was held in Yogyakarta and Serpong, Indonesia from February 8 to 14. This Workshop was executed based on the agreement in the Ninth International Conference for Nuclear Cooperation in Asia (ICNCA) held in Tokyo, March 1998. The whole Workshop consists of the Workshop on the theme of following three fields, 1) Neutron Scattering, 2) Neutron Activation analysis and 3) Safe Operation and Maintenance of Research Reactor, and the Sub-workshop carried out the experiment of Neutron Activation analysis. The total number of participants for the workshop was about 100 people from 8 countries, i.e. Australia, China, Indonesia, Korea, Malaysia, Thailand, Vietnam and Japan. The 38 papers are indexed individually. (J.P.N.)

Summary Report of the INL-JISEA Workshop on Nuclear Hybrud Energy Systems

Energy Technology Data Exchange (ETDEWEB)

Mark Antkowiak; Richard Boardman; Shannon Bragg-Sitton; Robert Cherry; Mark Ruth

2012-07-01

Hybrid energy systems utilize two or more energy resources as inputs to two or more physically coupled subsystems to produce one or more energy commodities as outputs. Nuclear hybrid energy systems can be used to provide load-following electrical power to match diurnal to seasonal-scale changes in power demand or to compensate for the variability of renewable wind or solar generation. To maintain economical, full rate operation of the nuclear reactor, its thermal energy available when power demand is low could be diverted into making synthetic vehicle fuels of various types. The Institute for Nuclear Energy Science and Technology (INEST) and the Joint Institute for Strategic Energy Analysis (JISEA) co-sponsored an international workshop to identify research topics important in advancing the potential use of hybrid systems with a specific focus on nuclear-renewable hybrid systems. The workshop included presentations ranging from energy challenges and research and development (R&D) directions being pursued by nations to multiple options for hybrid systems. Those options include one that is being commercialized to other opportunities and analysis results quantifying them. The workshop also involved two breakout sessions - one focused on thermal energy management issues especially at unit-operation scale and the second focused on system operations issues including system controls, regulatory issues, technical and economic analysis, and market challenges. A discussion involving the full group focused on more general issues such as societal involvement and participation. Key criteria for selecting hybrid energy system projects and metrics for comparing them were also identified by the full group. The workshop's findings are being used initially by INEST to define topics for a research preproposal solicitation.

Proceedings of the 1997 workshop on the utilization of research reactors

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-10-01

The 1997 Workshop on the Utilization of Research Reactors, which is the sixth Workshop on the theme of research reactor utilization was held in Bandung, Indonesia from November 6 to 13. This Workshop was executed based on the agreement in the Eighth International conference for Nuclear Cooperation in Asia (ICNCA) held in Tokyo, March 1997. The whole Workshop consists of the preceding Sub-workshop carried out the demonstration experiment of Radioisotope Production, and the Workshop on the theme of three fields (Neutron Scattering, Radioisotope production, Safe Operation and Maintenance of Research Reactor). The total number of participants for the workshop was about 100 people from 8 countries, i.e. China, Indonesia, Korea, Malaysia, Philippine, Thailand, Vietnam and Japan. It consists of the papers for Sub-workshop, Neutron Scattering, Radioisotope Production, Safe Operation and Maintenance of research reactor, and summary reports. The 53 of the presented papers are indexed individually. (J.P.N.)

Workshop on power plant cable condition monitoring: Proceedings

International Nuclear Information System (INIS)

Del Valle, L.

1988-07-01

A three-day workshop on cable condition monitoring was held in San Francisco on Fegruary 16--18, 1988. The workshop was cosponsored by the Nuclear Power, Electrical Systems, and Coal Combustion Systems Divisions of the Electric Power Research Institute. The primary objective of the workshop was to identify the state-of-the-art for cable condition monitoring. Twenty-five technical papers as well as EPRI research programs were presented at the technical sessions. Four working group sessions and one general session were held on each of two days. Each group session provided a forum for participants to exchange ideas and to discuss in more depth research for cable condition monitoring, existing and innovative testing technology, and utility and NRC needs for testing. Recommendations from the working groups were summarized and presented at the end of the workshop

Proceedings of the FNCA workshop on plant mutation breeding 2001. Molecular biological techniques

International Nuclear Information System (INIS)

Kume, Tamikazu; Watanabe, Kazuo; Tano, Shigemitsu

2002-02-01

The FNCA (Forum for Nuclear Cooperation in Asia) Workshop on Plant Mutation Breeding was held on 20-24 August 2001 in Bangkok, Thailand. The Workshop was sponsored by the Ministry of Education, Culture, Sports, Science and Technology (MEXT). The Kasetsart University (KU), the Office of Atomic Energy for Peace (OAEP) and Department of Agriculture (DOA) acted as local host and the organizer with the cooperation of the Ministry of Agriculture, Forestry and Fisheries (MAFF) of Japan, the Japan Atomic Industrial Forum (JAIF) and Japan Atomic Energy Research Institute (JAERI). The Workshop was attended by two participants, a Project Leader and an expert on molecular biological techniques for plant mutation breeding, from each of the participating countries, i.e. China, Indonesia, Malaysia, the Philippines and Vietnam. One participant from the Republic of Korea, nine participants from Japan and thirteen participants from Thailand including three invited speakers attended the Workshop. Eleven papers including three invited papers on the current status of molecular biological techniques for plant mutation breeding were presented. Discussions were focused to further regional cooperation, to review and discuss results of past activities. The Medium-Term Plan of the project on the application of radiation and radioisotopes for agriculture in participating countries of Regional Nuclear Cooperation Activities (RNCA) was formulated and agreed. This proceeding compiles the invited and contributed papers that were submitted from the speakers. (author)

Comparison of online, hands-on, and a combined approach for teaching cautery disbudding technique to dairy producers.

Science.gov (United States)

Winder, Charlotte B; LeBlanc, Stephen J; Haley, Derek B; Lissemore, Kerry D; Godkin, M Ann; Duffield, Todd F

2018-01-01

The use of pain control for disbudding and dehorning is important from both an animal and industry perspective. Best practices include the use of local anesthetic, commonly given as a cornual nerve block (CNB), and a nonsteroidal anti-inflammatory drug. The proportion is decreasing, but many dairy producers do not use local anesthesia, perhaps in part due to lack of knowledge of the CNB technique. Although this skill is typically learned in person from a veterinarian, alternative methods may be useful. The objective of this trial was to determine if there were differences in the efficacy of online training (n = 23), hands-on training (n = 20), and a combined approach (n = 23) for teaching producers to successfully administer a CNB and disbud a calf. The primary outcome was block efficacy, defined as a lack of established pain behaviors during iron application. Secondary outcomes were background knowledge (assessed by a written quiz), CNB and disbudding technique (evaluated by rubric scoring), time taken, and self-confidence before and after evaluation. Associations between training group and outcome were assessed with logistic regression, ordered logistic regression, and Cox-proportional hazard models, with a random effect for workshop. Block efficacy was not different between training groups, with 91% successful in both combined and online groups, and 75% in the hands-on trained group. Online learners had poorer technical scores than hands-on trainees. The combined group was not different from hands-on. Time to block completion tended to be longer for the online group (62 ± 11 s), whereas time to disbudding completion was not different between hands-on (41 ± 5 s) or combined trainees (41 ± 5 s). The combined group had the highest pre-evaluation confidence score, and remained higher after evaluation than online but was not different than hands-on. Although we saw some statistical differences between groups, absolute differences were small and block efficacy was

[Study on an Exoskeleton Hand Function Training Device].

Science.gov (United States)

Hu, Xin; Zhang, Ying; Li, Jicai; Yi, Jinhua; Yu, Hongliu; He, Rongrong

2016-02-01

Based on the structure and motion bionic principle of the normal adult fingers, biological characteristics of human hands were analyzed, and a wearable exoskeleton hand function training device for the rehabilitation of stroke patients or patients with hand trauma was designed. This device includes the exoskeleton mechanical structure and the electromyography (EMG) control system. With adjustable mechanism, the device was capable to fit different finger lengths, and by capturing the EMG of the users' contralateral limb, the motion state of the exoskeleton hand was controlled. Then driven by the device, the user's fingers conducting adduction/abduction rehabilitation training was carried out. Finally, the mechanical properties and training effect of the exoskeleton hand were verified through mechanism simulation and the experiments on the experimental prototype of the wearable exoskeleton hand function training device.

Fifth national stakeholder workshop summary report

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

On April 9--11, 1997, the Department of Energy`s Office of Worker and Community Transition convened its fifth National Stakeholder Workshop. The workshop addressed a wide range of work force restructuring and community transition issues critical to the future success of the Department. Two important elements of the meeting were: (1) reviewing progress made on the challenges identified during the March 1996f stakeholder`s meeting in Atlanta, Georgia; and (2) identifying areas that needed priority attention during the early months of the second Clinton Administration. The format of the Workshop included several plenary sessions and a number of small group discussion sessions. The small group sessions focused on topics related to labor issues, work force restructuring, work force planning, community transition, and employee concerns. The sessions provided a wide range of views on worker and community transition issues. The workshop included presentations on the following topics: Welcome and introductions; Opening remarks; Community reuse organizations: recent accomplishments; Privatization: policy, practice and potential pitfalls; Department of Energy`s integrated training initiatives; Congressional perspective on work force restructuring; and, Privatization and the Ten Year Plan.

International Workshop on Elliptic and Parabolic Equations

CERN Document Server

Schrohe, Elmar; Seiler, Jörg; Walker, Christoph

2015-01-01

This volume covers the latest research on elliptic and parabolic equations and originates from the international Workshop on Elliptic and Parabolic Equations, held September 10-12, 2013 at the Leibniz Universität Hannover. It represents a collection of refereed research papers and survey articles written by eminent scientist on advances in different fields of elliptic and parabolic partial differential equations, including singular Riemannian manifolds, spectral analysis on manifolds, nonlinear dispersive equations, Brownian motion and kernel estimates, Euler equations, porous medium type equations, pseudodifferential calculus, free boundary problems, and bifurcation analysis.

International workshop on multimodal virtual and augmented reality (workshop summary)

NARCIS (Netherlands)

Hürst, W.O.; Iwai, Daisuke; Balakrishnan, Prabhakaran

2016-01-01

Virtual reality (VR) and augmented reality (AR) are expected by many to become the next wave of computing with significant impacts on our daily lives. Motivated by this, we organized a workshop on “Multimodal Virtual and Augmented Reality (MVAR)” at the 18th ACM International Conference on

8th International Symposium on Intelligent Distributed Computing & Workshop on Cyber Security and Resilience of Large-Scale Systems & 6th International Workshop on Multi-Agent Systems Technology and Semantics

CERN Document Server

Braubach, Lars; Venticinque, Salvatore; Badica, Costin

2015-01-01

This book represents the combined peer-reviewed proceedings of the Eight International Symposium on Intelligent Distributed Computing - IDC'2014, of the Workshop on Cyber Security and Resilience of Large-Scale Systems - WSRL-2014, and of the Sixth International Workshop on Multi-Agent Systems Technology and Semantics- MASTS-2014. All the events were held in Madrid, Spain, during September 3-5, 2014. The 47 contributions published in this book address several topics related to theory and applications of the intelligent distributed computing and multi-agent systems, including: agent-based data processing, ambient intelligence, collaborative systems, cryptography and security, distributed algorithms, grid and cloud computing, information extraction, knowledge management, big data and ontologies, social networks, swarm intelligence or videogames amongst others.

Sixth international workshop on linear colliders. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Urakawa, Junji [ed.

1995-08-01

The sixth international workshop on linear colliders (LC95) was held by KEK at Tsukuba Center for Institute. In the workshop 8 parallel working group were organized: WG1 (beam sources and injection linacs), WG2 (damping rings and bunch compressors), WG3 (a: RF sources and structures, b: superconducting cavities, c: two beam accelerators), WG4 (beam dynamics in main linacs), WG5 (final focus and integration regions), WG6 (beam instrumentation), WG7 (overall parameters and construction techniques), WG8 (gamma-gamma collider and miscellaneous). This issue compiles materials which were used in the workshop. (J.P.N.).

Sixth international workshop on linear colliders. Proceedings

International Nuclear Information System (INIS)

Urakawa, Junji

1995-08-01

The sixth international workshop on linear colliders (LC95) was held by KEK at Tsukuba Center for Institute. In the workshop 8 parallel working group were organized: WG1 (beam sources and injection linacs), WG2 (damping rings and bunch compressors), WG3 (a: RF sources and structures, b: superconducting cavities, c: two beam accelerators), WG4 (beam dynamics in main linacs), WG5 (final focus and integration regions), WG6 (beam instrumentation), WG7 (overall parameters and construction techniques), WG8 (gamma-gamma collider and miscellaneous). This issue compiles materials which were used in the workshop. (J.P.N.)

Cleanroom Energy Efficiency Workshop Proceedings

Energy Technology Data Exchange (ETDEWEB)

Tschudi, Bill

1999-03-15

On March 15, 1999, Lawrence Berkeley National Laboratory hosted a workshop focused on energy efficiency in Cleanroom facilities. The workshop was held as part of a multiyear effort sponsored by the California Institute for Energy Efficiency, and the California Energy Commission. It is part of a project that concentrates on improving energy efficiency in Laboratory type facilities including cleanrooms. The project targets the broad market of laboratory and cleanroom facilities, and thus cross-cuts many different industries and institutions. This workshop was intended to raise awareness by sharing case study success stories, providing a forum for industry networking on energy issues, contributing LBNL expertise in research to date, determining barriers to implementation and possible solutions, and soliciting input for further research.

The Effect of Antibacterial Formula Hand Cleaners on the Elimination of Microbes on Hands

Science.gov (United States)

Coleman, J. R.

2002-05-01

: The purpose of this project is to find out which one of the antibacterial hand cleanser (antibacterial bar soap, antibacterial liquid hand soap, and liquid hand sanitizer) is more effective in eliminating microbes. If antibacterial- formula liquid hand soap is used on soiled hands, then it will be more effective in eliminating microbes. Germs are microorganisms that cause disease and can spread from person-to-person. Bacteria are a kind of microbe, an example of which is Transient Flora that is often found on hands. Hand washing prevents germs from spreading to others. During the procedure, swabs were used to take samples before and after the soiled hands had been washed with one of the antibacterial hand cleansers. Nutrient Easygel was poured into petri dishes to harden for 1 day, and then samples were swabbed on the gel. The Petri dishes were placed in an incubator for 24 hours, and then data was recorded accordingly. The antibacterial liquid hand soap was sufficient in eliminating the majority of bacteria. The hands had 65% of the bacteria on them, and after the liquid hand soap was used only 37% of the bacteria remained.

Report on the Southern Ocean Continuous Plankton Recorder (SO-CPR Standards Workshop 2016: SCAR SO-CPR Database Expert Group

Directory of Open Access Journals (Sweden)

Kunio T. Takahashi

2017-07-01

Full Text Available The“Southern Ocean Continuous Plankton Recorder (SO-CPR Survey Standards Workshop”was held at the Australian Antarctic Division on 12−16December 2016. The purposes of the workshop were to confirm that consistent and high standards of species identification, methodology, and data quality were being maintained amongst the main analysts in the SO-CPR Survey, and to discuss future training methods, including a SO-CPR manual that will include a counting rule book, and a future road map for the SO-CPR program. During the workshop we discussed a range of topics including: taxonomic resolution issues (particularly for Foraminifera and euphausiid larval identification and staging; laboratory methods (preservation and storage, with emphasis on maintaining correct pH; shipboard techniques; training methods; data handling (metadata, database, data sharing; gap analysis (spatial, temporal, data, quantitative; and future workshops/conferences, including comprehensive training workshops for emerging SO-CPR survey partners (India. We agreed that there should be a larger workshop every two years to ensure that the high standards of the SO-CPR program are maintained.

Competitiveness Improvement Project Informational Workshop

Energy Technology Data Exchange (ETDEWEB)

Sinclair, Karin C [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Preus, Robert W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Dana, Scott [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Van Dam, Jeroen J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Damiani, Rick R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jackson, Kyndall R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Baring-Gould, Edward I [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jain, Anant [Intertek

2018-02-27

This presentation was given at the Competitiveness Improvement Project (CIP) Informational Workshop on December 6, 2017. Topics covered during the workshop include an overview of the CIP, past projects, scoring criteria, technical support opportunities, certification body requirements, standards applicable to distributed wind generators, information on the National Electric Code, certification testing requirements, test site requirements, National Environmental Policy Act, design review, levelized cost of energy, procurement/contracting, project management/deliverables, and outreach materials.

Summary and report on four national environmental workshops

Energy Technology Data Exchange (ETDEWEB)

House, Peter W.

1980-07-01

Individual abstracts were prepared for the summaries of four workshops held during the last two years: (1) Integrated Assessment for Energy Related Environmental Standards Workshop - Berkeley, California, November 1978; (2) National Ecological Assessment Workshop - Savannah, Georgia, January 1979; (3) National/Regional Modelling Workshop - Reston, Virginia, May 1979; (4) Groundwater Workshop - Albuquerque, New Mexico, January 1980. (JGB)

Report on July 2015 Additional Protocol Coordinators Best Practices Workshop

Energy Technology Data Exchange (ETDEWEB)

Gitau, Ernest T.N. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burbank, Roberta L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Finch, Valerie A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-07-31

After 10 years of implementation experience, the Office of Nonproliferation and Arms Control (NPAC) within the Department of Energy/National Nuclear Security Administration (DOE/NNSA) conducted the Additional Protocol (AP) Coordinators Best Practices Workshop at Oak Ridge National Laboratory from July 29-30, 2015. The goal of this workshop was to identify implementation best practices, lessons learned, and compliance challenges from the various Additional Protocol Coordinators (APCs) at each laboratory in the DOE/NNSA complex and associated sites. The workshop provided the opportunity for participants to share their insights and establish networks that APCs can utilize to continue to discuss challenges (new and old), identify best practices, and enhance communication and coordination for reporting multi-lab research projects during review activities. Workshop participants included DOE/NNSA HQ, laboratory and site APCs, seasoned experts, members of the original implementation outreach team, and Field Element and site security representatives.

1st Workshop on Eye Tracking and Visualization

CERN Document Server

Chuang, Lewis; Fisher, Brian; Schmidt, Albrecht; Weiskopf, Daniel

2017-01-01

This book discusses research, methods, and recent developments in the interdisciplinary field that spans research in visualization, eye tracking, human-computer interaction, and psychology. It presents extended versions of papers from the First Workshop on Eye Tracking and Visualization (ETVIS), which was organized as a workshop of the IEEE VIS Conference 2015. Topics include visualization and visual analytics of eye-tracking data, metrics and cognitive models, eye-tracking experiments in the context of visualization interfaces, and eye tracking in 3D and immersive environments. The extended ETVIS papers are complemented by a chapter offering an overview of visualization approaches for analyzing eye-tracking data and a chapter that discusses electrooculography (EOG) as an alternative of acquiring information about eye movements. Covering scientific visualization, information visualization, and visual analytics, this book is a valuable resource for eye-tracking researchers within the visualization community.

Report on World Workshops on Oral Medicine IV and V

DEFF Research Database (Denmark)

Peterson, DE; Lodi, Giovanni; Jensen, Siri Beier

2014-01-01

The first World Workshop on Oral Medicine (WWOM) was held in 1988. The portfolio has continued to expand in scope and impact over the past twenty-six years. Five World Workshops were conducted between 1988 and 2010, focusing on creation of systematic reviews in biomedicine and health care...

Workshop report: Proceedings of the Rank Forum on Vitamin D

NARCIS (Netherlands)

Lanham-New, S.A.; Buttriss, J.L.; Miles, L.M.; Ashwell, M.; Berry, J.L.; Boucher, B.J.; Cashman, K.D.; Cooper, C.; Darling, A.L.; Francis, R.M.; Fraser, W.D.; Groot, de C.P.G.M.; Hypponen, E.; Kiely, M.; Lamberg-Allardt, C.; Macdonald, H.M.; Martineau, A.R.; Masud, T.; Mavroeidi, A.; Nowson, C.; Prentice, A.; Stone, E.M.; Reddy, S.; Vieth, R.; Williams, M.

2011-01-01

The Rank Forum on Vitamin D was held on 2nd and 3rd July 2009 at the University of Surrey, Guildford, UK. The workshop consisted of a series of scene-setting presentations to address the current issues and challenges concerning vitamin D and health, and included an open discussion focusing on the

Workshop on fundamental geochemistry needs for nuclear waste isolation

Energy Technology Data Exchange (ETDEWEB)

Heiken, J.H. (ed.)

1985-09-01

In their deliberations, workshop participants did not attempt to incorporate the constraints that the 1982 National Nuclear Waste Management Policy Act placed upon the site-specific investigations. In particular, there was no attempt to (1) identify the research areas that apply most strongly to a particular potential repository site, (2) identify the chronological time when the necessary data or knowledge could be available, or (3) include a sensitivity analysis to prioritize and limit data needs. The workshop participants felt these are the purview of the site-specific investigations; the purpose of the workshop was to discuss the generic geochemistry research needs for a nuclear waste repository among as broad spectrum of individual scientists as possible and to develop a consensus of what geochemical information is important and why.

Workshop on fundamental geochemistry needs for nuclear waste isolation

International Nuclear Information System (INIS)

Heiken, J.H.

1985-09-01

In their deliberations, workshop participants did not attempt to incorporate the constraints that the 1982 National Nuclear Waste Management Policy Act placed upon the site-specific investigations. In particular, there was no attempt to (1) identify the research areas that apply most strongly to a particular potential repository site, (2) identify the chronological time when the necessary data or knowledge could be available, or (3) include a sensitivity analysis to prioritize and limit data needs. The workshop participants felt these are the purview of the site-specific investigations; the purpose of the workshop was to discuss the generic geochemistry research needs for a nuclear waste repository among as broad spectrum of individual scientists as possible and to develop a consensus of what geochemical information is important and why

Proceedings of the 1999 workshop on the utilization of research reactors

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-10-01

The 1999 workshop on the utilization of reactors, which is the eighth workshop on the theme of research reactor utilization was held at JAERI Tokai and Mito Plaza Hotel, in Japan from November 25 to December 2. This workshop was executed based on the agreement in the Tenth International conference for Nuclear Cooperation in Asia (ICNCA) held in Tokyo, March 1999. The whole workshop consists of the workshop on the theme of following three fields, 1) neutron scattering, 2) radioisotope production and 3) safe operation and maintenance of research reactor, and the sub-workshop carried out the experiments of small angle neutron scattering. The total number of participants for the workshop was about 70 people from 9 countries, i.e. Australia, China, Indonesia, Korea, Malaysia, The Philippines, Thailand, Vietnam and Japan. The 37 of the presented papers are indexed individually. (J.P.N.)

General conclusions on workshop

International Nuclear Information System (INIS)

Rustand, H.

2006-01-01

The author proposes a general conclusion on the second workshop on the indemnification of damage in the event of a nuclear accident, organized in Bratislava, the 18-20 May 2005. He pointed out the most important discussions and the results revealed during these two days. (A.L.B.)

NEA International Workshop on the Nuclear Innovation Road-map - NI2050. Workshop proceedings

International Nuclear Information System (INIS)

Ait Abderrahim, Hamid; Fernandez Fernandez, Alberto; Van Walle, Eric; Speranzini, Robert; Zezula, Lubor; Puska, Eija Karita; Tuomisto, Harri; Al Mazouzi, Abderrahim; Bazile, Fanny; Cordier, Pierre-Yves; Wahide, Carole; Tromm, Th. Walter; Horvath, Akos; Agostini, Pietro; Ambrosini, Walter; Kamide, Hideki; Nakatsuka, Toru; Sagayama, Yutaka; Tsujimoto, Kazufumi; Jeong, Ik; LEE, Gye Seok; Roelofs, Ferry; Van Der Lugt, Hermen; Wrochna, Grzegorz; Alekseev, Pavel; Andreeva-Andrievskaya, Lyudmila N.; Liska, Peter; Cizelj, Leon; Castelao Lopez, Carlos; Zimmermann, Martin; Rayment, Fiona; Pasamehmetoglu, Kemal; Martin Ramos, Manuel; Schmitz, Bruno; Monti, Stefano; Bignan, Gilles; Mcgrath, Margaret; Caron-Charles, Marylise; Magwood, William IV; Ha, Jaejoo; Deffrennes, Marc; Paillere, Henri; Noh, Jae Man; Gulliford, Jim; Breest, Axel; Matsumoto, Kiyoshi; Lebedev, Vladimir

2015-07-01

The two-day workshop held at the OECD Headquarters in Paris on 7-8 July 2015, brought together some of the leading experts in the field of nuclear fission research, development and demonstration. The purpose was to launch the NEA Nuclear Innovation 2050 Initiative, aiming, after a first survey phase, at producing a road-map of main priority research programs and infrastructures necessary to support the role nuclear energy may play in the low carbon power sector of the future. This might then further lead to some ad-hoc co-operation frameworks that help to effectively implement key priorities coming out of the road-mapping. The workshop was organised into the following five sessions: 1 - Opening session on NI2050: vision and main objectives; 2 - National presentations on nuclear fission research and innovation activities (programs, infrastructures, budgets); 3 - Presentations on some existing international nuclear fission road-maps and co-operation frameworks; 4 - Defining the way forward for NI2050: survey, road-mapping and priorities and co-operation; 5 - Open discussion. This document gathers the available presentations given at this workshop

Collider workshop

International Nuclear Information System (INIS)

Anon.

1982-01-01

The promise of initial results after the start of operations at CERN's SPS proton-antiproton collider and the prospects for high energy hadron collisions at Fermilab (Tevatron) and Brookhaven (ISABELLE) provided a timely impetus for the recent Topical Workshop on Forward Collider Physics', held at Madison, Wisconsin, from 10-12 December. It became the second such workshop to be held, the first having been in 1979 at the College de France, Paris. The 100 or so participants had the chance to hear preliminary results from the UA1, UA4 and UA5 experiments at the CERN SPS collider, together with other new data, including that from proton-antiproton runs at the CERN Intersecting Storage Rings

Working Conditions in Carpet Weaving Workshops and Muscu-loskeletal Complaints among Workers in Tabriz - Iran

Directory of Open Access Journals (Sweden)

Jalil Nazari

2012-12-01

Full Text Available Background: Background: Carpet weaving operations usualy involve poor working conditions that can lead to the development of musculoskeletal disorders (MSDs. This study investigated MSDs among car-pet weavers in relation to working conditions from workers' view in Tabriz City, Northwest Iran.Method: This cross-sectional and descriptive study was conducted in city of Tabriz, Iran. Data were col-lected using interviews and questionnaires. The study population consisted of 200 randomly selected healthy weavers from twenty five active carpet weaving workshops.Results: The results showed a high prevalence of musculoskeletal problems among the study population. The most commonly affected body areas were neck, lower back, ankles/feet, hands/wrists, upper back, shoulders and knees, respectively. More than half of the weavers were not satisfied with the thermal con-dition, noise level and cleanliness of the air in the workshops. The result indicated a significant relation-ship between upper back symptoms and daily working time and between lower back symptoms and the numbers of rows of knots woven in a day. Weavers' satisfaction with hand tools shape and thermal condi-tion of the workshops were associated with lower back symptoms, whereas satisfaction with weaving looms were associated with upper back complaints.Conclusion: The poor working condition of hand-woven carpet workshops such as environmental conditionsand work station design and tools should be the subject of ergonomics interventions.

US-Japan workshop on field-reversed configurations with steady-state high-temperature fusion plasmas and the 11th US-Japan workshop on compact toroids

International Nuclear Information System (INIS)

Barnes, D.C.; Fernandez, J.C.; Rej, D.J.

1990-05-01

The US-Japan Workshop on Field-Reversed Configurations with Steady-State High-Temperature Fusion Plasma and the 11th US-Japan Workshop on Compact Toroids were held at Los Alamos National Laboratory, Los Alamos, New Mexico on November 7--9, 1989. These proceedings contain the papers presented at the workshops as submitted by the authors. These papers have been indexed separately

US-Japan workshop on field-reversed configurations with steady-state high-temperature fusion plasmas and the 11th US-Japan workshop on compact toroids

Energy Technology Data Exchange (ETDEWEB)

Barnes, D.C.; Fernandez, J.C.; Rej, D.J. (comps.)

1990-05-01

The US-Japan Workshop on Field-Reversed Configurations with Steady-State High-Temperature Fusion Plasma and the 11th US-Japan Workshop on Compact Toroids were held at Los Alamos National Laboratory, Los Alamos, New Mexico on November 7--9, 1989. These proceedings contain the papers presented at the workshops as submitted by the authors. These papers have been indexed separately.

Final Scientific EFNUDAT Workshop

CERN Multimedia

CERN. Geneva

2010-01-01

The Final Scientific EFNUDAT Workshop - organized by the CERN/EN-STI group on behalf of n_TOF Collaboration - will be held at CERN, Geneva (Switzerland) from 30 August to 2 September 2010 inclusive.EFNUDAT website: http://www.efnudat.euTopics of interest include: Data evaluationCross section measurementsExperimental techniquesUncertainties and covariancesFission propertiesCurrent and future facilities  International Advisory Committee: C. Barreau (CENBG, France)T. Belgya (IKI KFKI, Hungary)E. Gonzalez (CIEMAT, Spain)F. Gunsing (CEA, France)F.-J. Hambsch (IRMM, Belgium)A. Junghans (FZD, Germany)R. Nolte (PTB, Germany)S. Pomp (TSL UU, Sweden) Workshop Organizing Committee: Enrico Chiaveri (Chairman)Marco CalvianiSamuel AndriamonjeEric BerthoumieuxCarlos GuerreroRoberto LositoVasilis Vlachoudis Workshop Assistant: Géraldine Jean

Proceedings of the Workshop on CP Violation at KAON Factory

International Nuclear Information System (INIS)

Ng, J.N.

1989-07-01

These proceedings contain the written version of eight talks delivered at the Workshop on CP Violation at KAON Factory. The articles contain reviews on the exploration of CP violation effects associated with the s-quark. Discussion on the use of intense kaon fluxes, which will be available at the proposed KAON Factory, are included

High-Penetration Photovoltaics Standards and Codes Workshop, Denver, Colorado, May 20, 2010: Workshop Proceedings

Energy Technology Data Exchange (ETDEWEB)

Coddington, M.; Kroposki, B.; Basso, T.; Lynn, K.; Herig, C.; Bower, W.

2010-09-01

Effectively interconnecting high-level penetration of photovoltaic (PV) systems requires careful technical attention to ensuring compatibility with electric power systems. Standards, codes, and implementation have been cited as major impediments to widespread use of PV within electric power systems. On May 20, 2010, in Denver, Colorado, the National Renewable Energy Laboratory, in conjunction with the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE), held a workshop to examine the key technical issues and barriers associated with high PV penetration levels with an emphasis on codes and standards. This workshop included building upon results of the High Penetration of Photovoltaic (PV) Systems into the Distribution Grid workshop held in Ontario California on February 24-25, 2009, and upon the stimulating presentations of the diverse stakeholder presentations.

ANL--LASL workshop on advanced neutron detection systems

International Nuclear Information System (INIS)

Kitchens, T.A.

1979-06-01

A two-day workshop on advanced neutron detectors and associated electronics was held in Los Alamos on April 5--6, 1979, as a part of the Argonne National Laboratory--Los Alamos Scientific Laboratory Coordination on neutron scattering instrumentation. This report contains an account of the information presented and conclusions drawn at the workshop

EthoHand: A dexterous robotic hand with ball-joint thumb enables complex in-hand object manipulation

OpenAIRE

Konnaris, C; Gavriel, C; Thomik, AAC; Aldo Faisal, A

2016-01-01

Our dexterous hand is a fundmanetal human feature that distinguishes us from other animals by enabling us to go beyond grasping to support sophisticated in-hand object manipulation. Our aim was the design of a dexterous anthropomorphic robotic hand that matches the human hand's 24 degrees of freedom, under-actuated by seven motors. With the ability to replicate human hand movements in a naturalistic manner including in-hand object manipulation. Therefore, we focused on the development of a no...

Proceedings -- US Russian workshop on fuel cell technologies

Energy Technology Data Exchange (ETDEWEB)

Baker, B.; Sylwester, A. [comps.

1996-04-01

On September 26--28, 1995, Sandia National Laboratories sponsored the first Joint US/Russian Workshop on Fuel Cell Technology at the Marriott Hotel in Albuquerque, New Mexico. This workshop brought together the US and Russian fuel cell communities as represented by users, producers, R and D establishments and government agencies. Customer needs and potential markets in both countries were discussed to establish a customer focus for the workshop. Parallel technical sessions defined research needs and opportunities for collaboration to advance fuel cell technology. A desired outcome of the workshop was the formation of a Russian/American Fuel Cell Consortium to advance fuel cell technology for application in emerging markets in both countries. This consortium is envisioned to involve industry and national labs in both countries. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

Workshop on rules for exemption from regulatory control: Proceedings

International Nuclear Information System (INIS)

1989-04-01

This conference report documents the proceedings of an International Workshop on the subject of exempting radiation sources and practices from regulatory control. The purpose of the workshop was to provide national regulatory authorities an opportunity to exchange information on their respective approaches and practices involving exemptions and to enhance international understanding and cooperation on the derivation and practical application of the underlying principles. In addition, input from the workshop was intended to assist the NRC in the development of a policy statement on this issue. The workshop was divided into five sessions. During the first four sessions, papers were presented which defined the relative terms and concepts, outlined the national situations and approaches to the establishment and development of exemption rules, identified and discussed the existing issues, and gave the status of the international guidelines on exemption rules. The fifth session was devoted to summarizing the workshop and identifying the areas of consensus, the outstanding issues and the areas for future work. Individual papers were processed separately for the data base

7th International Workshop on Statistical Simulation

CERN Document Server

Mignani, Stefania; Monari, Paola; Salmaso, Luigi

2014-01-01

The Department of Statistical Sciences of the University of Bologna in collaboration with the Department of Management and Engineering of the University of Padova, the Department of Statistical Modelling of Saint Petersburg State University, and INFORMS Simulation Society sponsored the Seventh Workshop on Simulation. This international conference was devoted to statistical techniques in stochastic simulation, data collection, analysis of scientific experiments, and studies representing broad areas of interest. The previous workshops took place in St. Petersburg, Russia in 1994, 1996, 1998, 2001, 2005, and 2009. The Seventh Workshop took place in the Rimini Campus of the University of Bologna, which is in Rimini’s historical center.

Proceedings of the 10th Korea-Japan joint workshop on PSA. For Asian PSA network

International Nuclear Information System (INIS)

Yang, Joon-Eon; Homma, Toshimitsu

2009-12-01

The tenth Korea-Japan Joint Workshop on Probabilistic Safety Assessment (PSA) was held in the Jeju island of Korea, on May 18-20, 2009 organized by Korea Atomic Energy Research Institute (KAERI). The purpose of the workshop was to provide a forum for presentation and discussions on experiences and technical achievements related to PSA, risk-informed and performance-based approach, and other relevant issues in both countries. Since the first Korea-Japan Joint Workshop on PSA started in 1992, the workshops have provided an important and timely opportunity for exchange and discussion of the relevant information to all PSA practitioners and users of risk information in the industry, research, academia and regulatory arena. This was the tenth anniversary of the Joint Workshop with the main theme of 'For Asian PSA Network' and participants included those from China, Taiwan and the United States of America besides Korea and Japan. Two keynote speeches were presented by the former chairmen of this workshop, Prof. Chang-Sun Kang of Seoul National University and Prof. emeritus Shunsuke Kondo of Tokyo University. We had two special lectures, 70 papers presented by experts at 10 technical sessions related PSA, the special session on the status of PSA in Korea, Japan, China and Taiwan and panel discussion on their cooperation in PSA. This report provides the summary of each session, and all the presentation materials presented in the 10th Korea-Japan Joint Workshop on PSA. (author)

8th Cambridge Workshop on Universal Access and Assistive Technology

CERN Document Server

Lazar, Jonathan; Heylighen, Ann; Dong, Hua

2016-01-01

This book presents the proceedings of the 8th Cambridge Workshop on Universal Access and Assistive Technology (CWUAAT '14), incorporating the 11th Cambridge Workshop on Rehabilitation Robotics, held in Cambridge, England in March 2016. It presents novel and state-of-the-art research from an international group of leaders in the fields of universal access and assistive technology. It explores various issues including the reconciliation of usability, accessibility and inclusive design, the design of inclusive assistive and rehabilitation systems, measuring product demand and human capabilities, data mining and visualizing inclusion, legislation in inclusive design, and situational inclusive interfaces (automotive and aerospace). This book provides an invaluable resource to researchers, postgraduates, design practitioners, therapists and clinical practitioners, as well as design teachers.

Proceedings of the U.S. Geological Survey Eighth Biennial Geographic Information Science Workshop and first The National Map Users Conference, Denver, Colorado, May 10-13, 2011

Science.gov (United States)

Sieverling, Jennifer B.; Dietterle, Jeffrey

2014-01-01

The U.S. Geological Survey (USGS) is sponsoring the first The National Map Users Conference in conjunction with the eighth biennial Geographic Information Science (GIS) Workshop on May 10-13, 2011, in Lakewood, Colorado. The GIS Workshop will be held at the USGS National Training Center, located on the Denver Federal Center, Lakewood, Colorado, May 10-11. The National Map Users Conference will be held directly after the GIS Workshop at the Denver Marriott West, a convention hotel in the Lakewood, Colorado area, May 12-13. The National Map is designed to serve the Nation by providing geographic data and knowledge for government, industry, and public uses. The goal of The National Map Users Conference is to enhance communications and collaboration among the communities of users of and contributors to The National Map, including USGS, Department of the Interior, and other government GIS specialists and scientists, as well as the broader geospatial community. The USGS National Geospatial Program intends the conference to serve as a forum to engage users and more fully discover and meet their needs for the products and services of The National Map. The goal of the GIS Workshop is to promote advancement of GIS and related technologies and concepts as well as the sharing of GIS knowledge within the USGS GIS community. This collaborative opportunity for multi-disciplinary GIS and associated professionals will allow attendees to present and discuss a wide variety of geospatial-related topics. The Users Conference and Workshop collaboration will bring together scientists, managers, and data users who, through presentations, posters, seminars, workshops, and informal gatherings, will share accomplishments and progress on a variety of geospatial topics. During this joint event, attendees will have the opportunity to present or demonstrate their work; to develop their knowledge by attending hands-on workshops, seminars, and presentations given by professionals from USGS and

Workshop Report on Space Weather Risks and Society

Science.gov (United States)

Langhoff, Stephanie R.; Straume, Tore

2012-01-01

As technological innovations produce new capabilities, complexities, and interdependencies, our susceptibility to the societal impacts of space weather increase. There is real concern in the scientific community that our infrastructure would be at significant risk if a major geomagnetic storm should occur. To discuss the societal impacts of space weather, we brought together an interdisciplinary group of subject matter experts and societal stakeholders to participate in a workshop entitled Space Weather Risks and Society. The workshop was held at Ames Research Center (ARC) on 15-16 October 2011. The workshop was co-sponsored by NASA Ames Research Center (ARC), the Lockheed Martin Advanced Technology Center (LMATC), the Space Weather Prediction Center (SWPC, part of the National Oceanic and Atmospheric Administration NOAA), and the Rutherford Appleton Laboratory (RAL, part of the UK Science and Technology Facilities Council STFC). The workshop is part of a series of informal weekend workshops hosted by Center Director Pete Worden.

Summary of workshop on high temperature materials based on Laves phases

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-08-01

The Offices of Fossil Energy and Basic Energy Sciences of the Department of Energy jointly sponsored the Workshop on High Temperature Materials Based on Laves Phases in conjunction with the Tenth Annual Conference on Fossil Energy Materials held at the Radisson Summit Hill Hotel in Knoxville, Tennessee on May 14-16, 1996. The objective of this workshop was to review the current status and to address critical issues in the development of new-generation high-temperature structural materials based on Laves phases. The one-day workshop included two sessions of overview presentations and a session of discussion on critical scientific and technological issues. The Laves phases represent an abundant class of intermetallic alloys with possible high-temperature structural applications. Laves phases form at or near the AB{sub 2} composition, and there are over 360 binary Laves phases. The ability of these alloys to dissolve considerable amounts of ternary alloying additions provides over 900 combined binary and ternary Laves phases. Many Laves phases have unique properties which make them attractive for high-temperature structural use. At half their homologous temperature, they retain >0.85 of their ambient yield strength, which is higher than all other intermetallics. Many of the Laves phases also have high melting temperatures, excellent creep properties, reasonably low densities, and for alloys containing Cr, Al, Si or Be, good oxidation resistance. Despite these useful properties, the tendency for low-temperature brittleness has limited the potential application of this large class of alloys.

Third Workshop on Affective Brain-Computer Interfaces: introduction

NARCIS (Netherlands)

Mühl, C.; Chanel, G.; Allison, B.; Nijholt, Antinus

2013-01-01

Following the first and second workshop on affective brain-computer interfaces, held in conjunction with ACII in Amsterdam (2009) and Memphis (2011), the third workshop explores the advantages and limitations of using neurophysiological signals for the automatic recognition of affective and

2003 RIA R AND D WORKSHOP

International Nuclear Information System (INIS)

OZAKI, S.

2003-01-01

The 2003 RIA R and D Workshop was held on August 26-28, 2003 at the Four Points Sheraton Hotel in Bethesda, Maryland. This Workshop was chaired by Satoshi Ozaki of BNL and sponsored by the Nuclear Physics Division of DOE, with the help of Oak Ridge Institute for Science and Education (ORISE). The purpose of this workshop was to understand the present status of R and D efforts for RIA, to evaluate the needs for further R and D, and to identify opportunities for international collaborations. The workshop examined and documented the current pre-conceptual design for RIA, identifying areas where decisions on technical options remain. The status of the current RIA R and D program was documented, recognizing areas where efforts were needed in light of what had been learned. The ongoing and planned R and D activities for operating and planned rare-isotope facilities were presented, enabling the workshop to be a venue to develop coordinated R and D efforts of mutual benefit to U.S. and international efforts. The scientific program for the first day (August 26, 2003) consisted mostly of invited talks presented by major research groups involved in RIA and other RI beam facilities. The talks included those covering: Science of RIA and the RIA Facility Performance Requirements; The Reference RIA Facility Pre-CDR design that was used for the NSAC cost exercise (M. Harrison Sub-Panel) in January 2001; New or latest perspectives on the RIA design at ANL and MSU; and RI Beam facility plans and overview of the R and D activities at overseas laboratories. The second day (August 27, 2003) was devoted to contributed talks on continuing R and D, including that which had been supported by DOE RIA R and D funds. The third day (August 28, 2003) began with open panel discussions in the morning, including further input from participants. The panel members discussed the present status of the RIA planning and R and D needs in a closed session for the rest of the day, and then worked on report

First Canadian workshop on engineering structural integrity : CWESI. Proceedings

International Nuclear Information System (INIS)

2002-01-01

The First Canadian Workshop on Engineering Structural Integrity (CWESI) was held on October 16 and 17, 2002, in Toronto, Canada. The purpose of the Workshop was to review strategies for ESI in a number of key industries, and to attempt to plot a course for co-operation in ESI activities and implementation of ESI initiatives in Canadian industry, together with support for appropriate educational, research and development activities. The Workshop consisted of presentations by speakers from a number of industries. Presentations focused on in-service experience under service conditions related to the Canadian environment. This Workshop was attended by practising structural integrity engineers, managers with the responsibility for delivery of safe and reliable operation, and researchers in the structural integrity area

Summer workshops for high-school science teachers

International Nuclear Information System (INIS)

Young, H.H.; Kohl, J.

1975-01-01

A total of 52 summer workshops attended by over 1700 high-school science teachers have been given by 27 universities in the period of 1971 to 1974. These workshops are funded by ERDA to provide factual material through educational channels so that the public could obtain an informed perspective of the role of nuclear energy as an electrical power source. The workshops have included lectures, panel discussions, laboratories, and field trips, and have emphasized providing teachers with materials for use in their classrooms. Actual use of workshop material has been monitored through workshop reports, meetings, and visits. Participants have used their workshop experience for classroom presentations, talks to the public, and for assembly programs. The material developed and the experience of presenting it has proved valuable for the nuclear engineering faculty members giving the workshops. They have used their experience in other courses, for public lectures, and for other workshops. And they have gained personal experience in methods of dealing with the nuclear power controversy. A review of these workshops indicates that they offer at a reasonable cost a productive method of presenting factual information on the various solutions to the complex electrical generation problem

SIAM Workshop: Focus on Diversity 2001

Energy Technology Data Exchange (ETDEWEB)

None

2001-01-01

The Society for Industrial and Applied Mathematics (SIAM) held a workshop focused on underrepresented minorities--graduate and undergraduate students, postdocs, and recent Ph.D's--in the mathematical and computational sciences on July 11, 2001, as part of the SIAM Annual Meeting in San Diego, California. The workshop was intended to accomplish several goals: (1) to a provide workshop focused on careers for and retention of minority students in the mathematical and computational sciences; (2) to bring together a mixture of people from different levels of professional experience, ranging from undergraduate students to senior scientists in an informal setting in order to share career experiences and options; (3) to provide an opportunity for minority graduate students, postdocs, and recent Ph.D's to present their research at an international meeting; (4) to expose undergraduate students to the many professional opportunities resulting from graduate degrees in science and mathematics; and (5) to encourage undergraduate and graduate students to speak frankly with each other about personal issues and experiences associated with pursuing a scientific career.

Proceedings of the fifth Australia-Japan workshop on plasma diagnostics

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The fifth Australia-Japan Workshop on Plasma Diagnostics was held at Japan Atomic Energy Research Institute (JAERI), Naka, Japan, from December 15 to 17 in 1999. The first workshop was held at JAERI, Naka in 1989, and the workshops have been held almost every two years in Australia and Japan under the Agreement between the Government of Japan and the Government of Australia on cooperation in the field of Science and Technology. In the workshops, latest research works for plasma diagnostics and plasma experiment have been presented and discussed. The research works of both countries have been developed, and the mutual understanding became deeper through the workshops. In the fifth workshop, the statuses of JT-60U (JAERI), LHD (National Institute for Fusion Science) and H-1NF (Australian National University) were introduced, and the latest research works for plasma diagnostics were also presented. The active and deeper discussions were performed. This report contains twenty-eight papers presented at the workshop. The 25 of the presented papers are indexed individually. (J.P.N.)

Summary of the CEC/USDOE workshop on uncertainty analysis

International Nuclear Information System (INIS)

Elderkin, C.E.; Kelly, G.N.

1990-06-01

There is uncertainty in all aspects of assessing the consequences of accidental releases of radioactive material, from understanding and describing the environmental and biological transfer processes to modeling emergency response. The need for an exchange of views and a comparison of approaches between the diverse disciplines led to the organization of a CEC/USDOE Workshop on Uncertainty Analysis held in Santa Fe, New Mexico, in November 1989. The workshop brought together specialists in a number of disciplines, including those expert in the mathematics and statistics of uncertainty analysis, in expert judgment elicitation and evaluation, and in all aspects of assessing the radiological and environmental consequences of accidental releases of radioactive material. In addition, there was participation from users of the output of accident consequences assessment in decision making and/or regulatory frameworks. The main conclusions that emerged from the workshop are summarized in this paper. These are discussed in the context of three different types of accident consequence assessment: probabilistic assessments of accident consequences undertaken as inputs to risk analyses of nuclear installations, assessments of accident consequences in real time to provide inputs to decisions on the introduction of countermeasures, and the reconstruction of doses and risks resulting form past releases of radioactive material

MesonNet Workshop on Meson Transition Form Factors

CERN Document Server

Eidelman, S; Hanhart, C; Kubis, B; Kupsc, A; Leupold, S; Moskal, P; Schadmand, S

2012-01-01

The mini-proceedings of the Workshop on Meson Transition Form Factors held in Cracow from May 29th to 30th, 2012 introduce the meson transition form factor project with special emphasis on the interrelations between the various form factors (on-shell, single off-shell, double off-shell). Short summaries of the talks presented at the workshop follow.

International Workshop on "Intersubband Transitions in Quantum Wells : Physics and Applications"

CERN Document Server

Su, Yan-Kuin

1998-01-01

The International Workshop on "Intersubband Transitions in Quantum Wells:: Physics and Applications," was held at National Cheng Kung University, in Tainan, Taiwan, December 15-18, 1997. The objective of the Workshop is to facilitate the presentation and discussion of the recent results in theoretical, experimental, and applied aspects of intersubband transitions in quantum wells and dots. The program followed the tradition initiated at the 1991 conference in Cargese-France, the 1993 conference in Whistler, B. C. Canada, and the 1995 conference in Kibbutz Ginosar, Israel. Intersubband transitions in quantum wells and quantum dots have attracted considerable attention in recent years, mainly due to the promise of various applications in the mid- and far-infrared regions (2-30 J. lm). Over 40 invited and contributed papers were presented in this four-day workshop, with topics covered most aspects of the intersubband transition phenomena including: the basic intersubband transition processes, multiquantum well i...

5. international workshop on the identification of transcribed sequences

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-31

This workshop was held November 5--8, 1995 in Les Embiez, France. The purpose of this conference was to provide a multidisciplinary forum for exchange of state-of-the-art information on mapping the human genome. Attention is focused on the following topics: transcriptional maps; functional analysis; techniques; model organisms; and tissue specific libraries and genes. Abstracts are included of the papers that were presented.

Workshop of medical physics

International Nuclear Information System (INIS)

1988-01-01

This event was held in San Carlos de Bariloche, Argentine Republic from 14 th. through 18 th. November, 1988. A great part of the physicians in the area of medical physics participated in this workshop. This volume includes the papers presented at this Workshop of Medical Physics [es

EDITORIAL: 15th Workshop on MHD Stability Control: 3D Magnetic Field Effects in MHD Control 15th Workshop on MHD Stability Control: 3D Magnetic Field Effects in MHD Control

Science.gov (United States)

Buttery, Richard

2011-08-01

This annual workshop on MHD Stability Control has been held since 1996 with a focus on understanding and developing control of MHD instabilities for future fusion reactors. The workshop generally covers a wide range of stability topics: from disruptions, to tearing modes, error fields, ELMs, resistive wall modes (RWMs) and ideal MHD. It spans many device types, particularly tokamaks, stellarators and reversed field pinches, to pull out commonalities in the physics and improve understanding. In 2010 the workshop was held on 15-17 November at the University of Wisconsin in Madison and was combined with the annual US-Japan MHD Workshop. The theme was `3D Magnetic Field Effects in MHD Control', with a focus on multidisciplinary sessions exploring issues of plasma response to 3D fields, the manifestation of such fields in the plasma, and how they influence stability. This has been a topic of renewed interest, with utilisation of 3D fields for ELM control now planned in ITER, and a focus on the application of such fields for error field correction, disruption avoidance, and RWM control. Key issues included the physics of the interaction, types of coils and harmonic spectra needed to control instabilities, and subsidiary effects such as braking (or rotating) the plasma. More generally, a wider range of issues were discussed including RWM physics, tearing mode physics, disruption mitigation, ballooning stability, the snowflake divertor concept, and the line tied pinch! A novel innovation to the meeting was a panel discussion session, this year on Neoclassical Toroidal Viscosity, which ran well; more will be tried next year. In this special section of Plasma Physics and Controlled Fusion we present several of the invited and contributed papers from the 2010 workshop, which have been subject to the normal refereeing procedures of the journal. These papers give a sense of the exceptional quality of the presentations at this workshop, all of which may be found at http

Proceedings of the CNRA/CSNI workshop on steam generator tube integrity in nuclear power plants

International Nuclear Information System (INIS)

Diercks, D.R.

1997-02-01

The objective of the workshop was to provide a working forum for the exchange of information by contributing experts on current issues related to PWR steam generator tube integrity. One hundred persons from 15 countries attended the workshop, including 36 from regulatory and nuclear policy agencies, 28 from research and development laboratories, 18 from nuclear vendors and consulting firms, and 18 from electrical utilities. The workshop opened with a plenary session; the first part of the session covered international steam generator regulatory practices and issues, featuring speakers from regulatory bodies in Belgium, France, Japan, Spain, and the US. In Part 2 of the plenary session, comprehensive technical overviews on steam generator tubing degradation, inspection, and integrity were presented by authorities in these fields from the US, France, and Belgium. Parallel working sessions on the second and third days of the workshop then developed findings and recommendations in the areas of (1) tubing degradation, (2) tubing inspection, (3) tubing integrity, (4) preventative and corrective measures, and (5) operational aspects and risk analysis. On the final day of the workshop, the working-session facilitators presented summaries of their sessions to the workshop attendees. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database

Proceedings of the CNRA/CSNI workshop on steam generator tube integrity in nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Diercks, D.R. [Argonne National Lab., IL (United States)

1997-02-01

The objective of the workshop was to provide a working forum for the exchange of information by contributing experts on current issues related to PWR steam generator tube integrity. One hundred persons from 15 countries attended the workshop, including 36 from regulatory and nuclear policy agencies, 28 from research and development laboratories, 18 from nuclear vendors and consulting firms, and 18 from electrical utilities. The workshop opened with a plenary session; the first part of the session covered international steam generator regulatory practices and issues, featuring speakers from regulatory bodies in Belgium, France, Japan, Spain, and the US. In Part 2 of the plenary session, comprehensive technical overviews on steam generator tubing degradation, inspection, and integrity were presented by authorities in these fields from the US, France, and Belgium. Parallel working sessions on the second and third days of the workshop then developed findings and recommendations in the areas of (1) tubing degradation, (2) tubing inspection, (3) tubing integrity, (4) preventative and corrective measures, and (5) operational aspects and risk analysis. On the final day of the workshop, the working-session facilitators presented summaries of their sessions to the workshop attendees. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

Report on the Second Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE2)

Science.gov (United States)

Katz, Daniel S.; Choi, Sou-Cheng T.; Wilkins-Diehr, Nancy; Chue Hong, Neil; Venters, Colin C.; Howison, James; Seinstra, Frank; Jones, Matthew; Cranston, Karen; Clune, Thomas L.; de Val-Borro, Miguel; Littauer, Richard

2016-02-01

This technical report records and discusses the Second Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE2). The report includes a description of the alternative, experimental submission and review process, two workshop keynote presentations, a series of lightning talks, a discussion on sustainability, and five discussions from the topic areas of exploring sustainability; software development experiences; credit & incentives; reproducibility & reuse & sharing; and code testing & code review. For each topic, the report includes a list of tangible actions that were proposed and that would lead to potential change. The workshop recognized that reliance on scientific software is pervasive in all areas of world-leading research today. The workshop participants then proceeded to explore different perspectives on the concept of sustainability. Key enablers and barriers of sustainable scientific software were identified from their experiences. In addition, recommendations with new requirements such as software credit files and software prize frameworks were outlined for improving practices in sustainable software engineering. There was also broad consensus that formal training in software development or engineering was rare among the practitioners. Significant strides need to be made in building a sense of community via training in software and technical practices, on increasing their size and scope, and on better integrating them directly into graduate education programs. Finally, journals can define and publish policies to improve reproducibility, whereas reviewers can insist that authors provide sufficient information and access to data and software to allow them reproduce the results in the paper. Hence a list of criteria is compiled for journals to provide to reviewers so as to make it easier to review software submitted for publication as a "Software Paper."

Proceedings of the 1998 Photovoltaic Performance and Reliability Workshop

International Nuclear Information System (INIS)

Kroposki, B.

1998-01-01

This proceedings is the compilation of all papers presented at the 11th PV Performance and Reliability Workshop held at the Doubletree Hotel in Cocoa Beach, Florida, on November 3-5, 1998. The workshop was hosted by the Florida Solar Energy Center. This year's workshop included presentations from 29 speakers and had 110 attendees

Research Directions for Cyber Experimentation: Workshop Discussion Analysis.

Energy Technology Data Exchange (ETDEWEB)

DeWaard, Elizabeth [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Deccio, Casey [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Fritz, David Jakob [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Tarman, Thomas D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-10-01

Sandia National Laboratories hosted a workshop on August 11, 2017 entitled "Research Directions for Cyber Experimentation," which focused on identifying and addressing research gaps within the field of cyber experimentation , particularly emulation testbeds . This report mainly documents the discussion toward the end of the workshop, which included research gaps such as developing a sustainable research infrastructure, exp anding cyber experimentation, and making the field more accessible to subject matter experts who may not have a background in computer science . Other gaps include methodologies for rigorous experimentation, validation, and uncertainty quantification, which , if addressed, also have the potential to bridge the gap between cyber experimentation and cyber engineering. Workshop attendees presented various ways to overcome these research gaps, however the main conclusion for overcoming these gaps is better commun ication through increased workshops, conferences, email lists, and slack chann els, among other opportunities.

Exploring the Solar System in the Classroom: A Hands-On Approach

Science.gov (United States)

Coombs, Cassandra R.

2000-01-01

This final report discusses the development and implementation of several educational products for K-16 teachers and students. Specifically, I received support for: (A) three K-12 Teacher workshops, Exploring the Solar System in the Classroom: A Hands-On Approach, and minimal Support to finish two computer-based tutorials. (B) Contact Light: An Interactive CD-ROM, and (C) Another Look at Taurus Littrow: An Interactive GIS Database. Each of these projects directly supports NASA's Strategic Plan to: "Involve the education community in our endeavors to inspire America's students, create learning opportunities, enlighten inquisitive minds", and, to "communicate widely the content, relevancy, and excitement of NASA's missions and discoveries to inspire and to increase understanding and the broad application of science and technology." Attachment: Appendix A. And also article: "Aristarchus plateau: as potential lunar base site."

Proceedings from the Workshop on Phytoremediation of Inorganic Contaminants

Energy Technology Data Exchange (ETDEWEB)

Brown, Jay Thatcher; Matthern, Gretchen Elise; Glenn, Anne Williams; Kauffman, J.; Rock, S.; Kuperberg, M.; Ainsworkth, C.; Waugh, J.

2000-02-01

The Metals and Radionuclides Product Line of the U.S. Department of Energy (DOE) Subsurface Contaminants Focus Area (SCFA) is responsible for the development of technologies and systems that reduce the risk and cost of remediation of radionuclide and hazardous metal contamination in soils and groundwater. The rapid and efficient remediation of these sites and the areas surrounding them represents a technological challenge. Phytoremediation, the use of living plants to cleanup contaminated soils, sediments, surface water and groundwater, is an emerging technology that may be applicable to the problem. The use of phytoremediation to cleanup organic contamination is widely accepted and is being implemented at numerous sites. This workshop was held to initiate a discussion in the scientific community about whether phytoremediation is applicable to inorganic contaminants, such as metals and radionuclides, across the DOE complex. The Workshop on Phytoremediation of Inorganic Contaminants was held at Argonne National Laboratory from November 30 through December 2, 1999. The purpose of the workshop was to provide SCFA and the DOE Environmental Restoration Program with an understanding of the status of phytoremediation as a potential remediation technology for DOE sites. The workshop was expected to identify data gaps, technologies ready for demonstration and deployment, and to provide a set of recommendations for the further development of these technologies. More specifically, the objectives of the workshop were to: · Determine the status of the existing baseline, including technological maturation, · Identify areas for future potential research, · Identify the key issues and recommendations for issue resolution, · Recommend a strategy for maturing key aspects of phytoremediation, · Improve communication and collaboration among organizations currently involved in phytoremediation research, and · Identify technical barriers to making phytoremediation commercially

Stanford Workshop on Surgical Simulation

National Research Council Canada - National Science Library

Salisbury, Kenneth

2001-01-01

.... The goal of this workshop was to bring together researchers and developers from around the world who focus on modeling and simulation of deformable materials for applications requiring real-time interaction...

Department of Energy workshops on industrial energy conservation reporting

Energy Technology Data Exchange (ETDEWEB)

Harvey, Douglas G.

1979-01-01

A voluntary industrial energy-conservation program was initiated and now includes 50 trade organizations representing over 3,000 companies. Their current reporting system is an effort to respond to the Energy Policy and Conservation Act requirements, as now modified by the National Energy Conservation Policy Act. DOE's Office of Industrial Programs held six workshops in various key locations between November 1978 and February 1979 to enable energy managers to develop ideas and make suggestions that would improve the current and future energy-reporting programs. This report is a summary of the wide range of recommendations that the workshop participants offered as a means of meeting the NECPA requirements and the criticism of the current reporting program. It also reflects industry's views on potential approaches to future reporting. (MCW)

International workshop on chromosome 3. Final report, April 15, 1991--April 14, 1992

Energy Technology Data Exchange (ETDEWEB)

Gemmill, R.M.

1992-07-01

The Second Workshop on Human Chromosome 3 was held on April 4--5, 1991 at Denver, Colorado. There were 43 participants representing 8 nations. The workshop participants reviewed the current state of the chromosome 3 map, both physical and genetic, and prepared lists of markers and cell lines to be made commonly available. These markers and cell lines should be incorporated into the mapping efforts of diverse groups to permit the integration of data and development of consensus maps at future workshops. Region specific efforts were described for sections of the chromosome harboring genes thought to be involved in certain diseases including Von Hippel-Lindau disease, 3p-syndrome, lung cancer and renal cancer. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

Proceedings of the workshop on physics at current accelerators and supercolliders

International Nuclear Information System (INIS)

Hewett, J.L.; White, A.R.; Zeppenfeld, D.

1993-01-01

This report contains papers from the workshop on SSC physics. The topics of these papers include: electroweak physics; electroweak symmetry breaking; heavy flavors; searches for new phenomena; strong interactions and full acceptance physics; and event simulation. These paper have been cataloged separately on the data base

Proceedings of the workshop on physics at current accelerators and supercolliders

Energy Technology Data Exchange (ETDEWEB)

Hewett, J L; White, A R; Zeppenfeld, D [eds.

1993-06-02

This report contains papers from the workshop on SSC physics. The topics of these papers include: electroweak physics; electroweak symmetry breaking; heavy flavors; searches for new phenomena; strong interactions and full acceptance physics; and event simulation. These paper have been cataloged separately on the data base.

2017 Bipolar Plate Workshop Summary Report

Energy Technology Data Exchange (ETDEWEB)

Kopasz, John P. [Argonne National Lab. (ANL), Argonne, IL (United States); Benjamin, Thomas G. [Argonne National Lab. (ANL), Argonne, IL (United States); Schenck, Deanna [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-08-17

The Bipolar Plate (BP) Workshop was held at USCAR1 in Southfield, Michigan on February 14, 2017 and included 63 participants from industry, government agencies, universities, and national laboratories with expertise in the relevant fields. The objective of the workshop was to identify research and development (R&D) needs, in particular early-stage R&D, for bipolar plates for polymer electrolyte membrane (PEM) fuel cells for transportation applications. The focus of the workshop was on materials, manufacturing, and design aspects of bipolar plates with the goal of meeting DOE’s 2020 bipolar plate targets. Of special interest was the cost target of ≤$3/kW for the bipolar plate.

Impact of MDGs capacity building workshop on teachers ...