Complying with US and European complaint handling requirements.

Science.gov (United States)

Donawa, M E

1997-09-01

The importance of customer complaints for providing valuable information on the use of medical devices is clearly reflected in United States (US) and European quality system requirements for handling complaints. However, there are significant differences in US and European complaint handling requirements. This article will discuss those differences and methods for ensuring compliance.

Methodology for construction compliance monitoring in the crediting of investment projects for road construction

Science.gov (United States)

Vaynshtok, Natalia

2017-10-01

The article provides the results of development of the methodology for construction compliance monitoring in the crediting of investment projects for road construction. Work scope analysis of construction audit was conducted and an algorithm of financial audit in the crediting investment projects was developed. Furthermore, the possible pitfalls and abuses of counterparties were investigated and recommendations were given allowing the bank to receive objective and independent information on the progress of the project in real time. This mechanism is useful for the bank in insurance of possible risks, targeted and rational use of credit funds.

Compliance among soft contact lens wearers.

Science.gov (United States)

Kuzman, Tomislav; Kutija, Marija Barisić; Masnec, Sanja; Jandroković, Sonja; Mrazovac, Danijela; Jurisić, Darija; Skegro, Ivan; Kalauz, Miro; Kordić, Rajko

2014-12-01

Contact lens compliance is proven to be crucial for preventing lens wear-related complications because of the interdependence of the steps in lens care regime and their influence on lens system microbial contamination. Awareness of the patients' lens handling compliance as well as correct recognition of non-compliant behaviours is the basis for creating more targeted strategies for patient education. The aim of this study was to investigate compliance among soft contact lens (SCL) wearers in different aspects of lens care handling and wearing habits. In our research 50 asymptomatic lens wearers filled out a questionnaire containing demographic data, lens type, hygiene and wearing habits, lenses and lens care system replacement schedule and self-evaluation of contact lens handling hygiene. We established criteria of compliance according to available manufacturer's recommendations, prior literature and our clinical experience. Only 2 (4%) of patients were fully compliant SCL wearers. The most common non-compliant behaviours were insufficient lens solution soaking time (62%), followed by failure to daily exchange lens case solution and showering while wearing lenses. 44% of patients reported storing lenses in saline solution. Mean lens storage case replacement was 3.6 months, with up to 78% patients replacing lens case at least once in 3 months. Average grade in self evaluating level of compliance was very good (4 +/- 0.78) (from 1-poor level of hygiene to 5-great level of hygiene). Lens wearers who reported excessive daily lens wear and more than 10 years of lens wearing experience were also found to be less compliant with other lens system care procedures. (t = -2.99, df=47, p rate, self grading was relatively high. Therefore, these results indicate the need for patient education and encouragement of better lens wearing habits and all of the lens maintenance steps at each patient visit.

Compliance with physical exercise

DEFF Research Database (Denmark)

Gram, Anne Sofie; Bønnelycke, Julie; Rosenkilde Larsen, Mads

2014-01-01

Aims: Sixty-one healthy, sedentary, moderately overweight young men participated in a randomised controlled trial to examine the effects of two different doses of endurance exercise on health behaviour and exercise compliance. Methods: Participants were randomised to a sedentary control group......), a post hoc thematic analysis was conducted to connect qualitative and quantitative data in a joint analysis. Results: Of the subjects interviewed, exercise compliance expressed as 95% CI was [96.8; 103%] in the MOD group and [82.9; 99.6%] in the HIGH group. The different doses of daily exercise equally...... or quantitative methodology alone. The preconditions of the TBP were fulfilled, and it represents a methodological model to explain the high degree of compliance and motivation to exercise....

Methodology and results of risk assessment of interconnections within the JET active gas handling system

International Nuclear Information System (INIS)

Ballantyne, P.R.; Bell, A.C.; Konstantellos, A.; Hemmerich, J.L.

1992-01-01

The Joint European Torus (JET) Active Gas Handling System (AGHS) is a complex interconnection of numerous subsystems. While individual subsystems were assessed for their risk of operation, an assessment of the effects of inadvertent interconnections was needed. A systematic method to document the assessment was devised to ease the assessment of complex plant and was applied to the AGHS. The methodology, application to AGHS, the four critical issues and required plant modifications as a result of this assessment are briefly discussed in this paper

Bionic design methodology for wear reduction of bulk solids handling equipment

NARCIS (Netherlands)

Chen, G.; Schott, D.L.; Lodewijks, G.

2016-01-01

Large-scale handling of particulate solids can cause severe wear on bulk solids handling equipment surfaces. Wear reduces equipment life span and increases maintenance cost. Examples of traditional methods to reduce wear of bulk solids handling equipment include optimizing transport operations

Managing compliance risk after Mifid

OpenAIRE

P. Musile Tanzi; G. Gabbi; D. Previati; P. Schwizer

2013-01-01

Purpose – The purpose of this paper is to focus on changes in the compliance function within major European banks and other financial intermediaries and on the effects of Markets in Financial Instruments Directive (MiFID) implementation. Design/methodology/approach – The four areas of research seek to answer the following questions: Is the positioning of the compliance function “at the top” of the organizational structure? Are the roles attributed to the compliance function, th...

A Theory of Compliance with Minimum Wage Law

OpenAIRE

Asongu Simplice; Jellal Mohamed

2014-01-01

Purpose – In this paper, we introduce firm heterogeneity in the context of a model of non-compliance with minimum wage legislation. Design/methodology/approach – Theoretical modeling under government compliance policy and wages & employment under non compliance. Findings – The introduction of heterogeneity in the ease with which firms can be monitored for non compliance allows us to show that non-compliance will persist in sectors which are relatively difficult to monitor, despite the governm...

Economic competitiveness gap related to the application of the GAEC standards of cross-compliance on farms: evaluation methodology

Directory of Open Access Journals (Sweden)

Marco Fedrizzi

2015-12-01

Full Text Available This paper describes the methods used in the monitoring carried out in the farms of the MO.NA.CO. project, to calculate the economic competitiveness gap faced by agricultural holdings that accede to the commitments imposed by the standards included in the project. The monitoring works were performed in agricultural holdings in relation to the particular reference condition of each standard. The processing of the information acquired allowed us to define the working times of each cultivation operation by means of the indications in the recommendations of the Associazione Italiana di Genio Rurale - Italian Rural Engineering Association, that considers the official methodology of the International Commission of the Organisation Scientifique du Travail en Agriculture (C.I.O.S.T.A.. The overall costs and revenues in case of compliance or non-compliance with the commitments of the standard were calculated by using Biondi’s methodology and other norms that indicate the technical and economic coefficients to be used in the calculations (EP 496.2 and D 497.4 ASAE standards. With the data related to the unit cost of ploughing a model Partial Least Squares (PLS has been achieved and validated, and it makes possible to predict the unit cost of this agricultural operation. Finally, the values of the variation of the economic competitiveness gap are reported for each standard.

Proposal of inspection methodology for environment radiological control

International Nuclear Information System (INIS)

Martins, Nadia Soido Falcao

2005-01-01

The Radiation Protection and Dosimetry Institute (IRD) of the Brazilian Nuclear Energy Commission (CNEN) is in charge of verifying that the self-monitoring operator is effective to control the radiological quality of environmental around the nuclear facilities and carried out in accordance with the regulatory requirements. While a long time, the verification of compliance was kept by the conduction of large scale monitoring programs around all the authorized installations. The IRD decided to reformulate its performance behavior, starting another kind of control program, due to the number increase of nuclear installations and the diversity of activities conducted by the operators. This program, so-called Monitoring Control Program (PCM) is a regulatory activity developed by the Environmental Impact Assessment Service (SEAIA) of IRD and has the aim of check the effectiveness of authorized self-control. Actually the regulatory control of environmental radiological integrity around the authorized nuclear installation essentially depends on the effectiveness of regulatory inspections fulfilled by the SEAIA/IRD. Due to the implementation of modern practices of management in the IRD, specially the quality management system on regulatory inspection activities, emerged the need of unify these actions. It was also necessary to establish standard procedures required for inspection conduction. This work proposes one methodology for the inspections of environmental radiological control suitable to assure the compliance and effectiveness of environmental and effluent monitoring programs conducted by the operator, through the systematic verification of compliance and data quality assessment. The proposed methodology seeks to attend the appeals for high control standards of environment protection and public health. Here, we presented as products of this work: The inspection handbook and checklists for inspections; one framework for sampling, handling, recording and reporting of

Customers' attributional judgments towards complaint handling in airline service: a confirmatory study based on attribution theory.

Science.gov (United States)

Chiou, Wen-Bin

2007-06-01

Besides flight safety, complaint handling plays a crucial role in airline service. Based upon Kelley's attribution theory, in the present study customers' attributions were examined under different conditions of complaint handling by the airlines. There were 531 passengers (216 women; ages 21 to 63 years, M = 41.5, SD = 11.1) with experiences of customer complaints who were recruited while awaiting boarding. Participants received one hypothetical scenario of three attributional conditions about complaint handling and then reported their attributional judgments. The findings indicated that the passengers were most likely to attribute the company's complaint handling to unconditional compliance when the airline company reacted to customer complaints under low distinctiveness, high consistency, and when consensus among the airlines was low. On the other hand, most passengers attributed the company's complaint handling to conditional compliance under the conditions in which distinctiveness, consistency, and consensus were all high. The results provide further insights into how different policies of complaint management affect customers' attributions. Future directions and managerial implications are also discussed.

Practices of Handling

DEFF Research Database (Denmark)

Ræbild, Ulla

to touch, pick up, carry, or feel with the hands. Figuratively it is to manage, deal with, direct, train, or control. Additionally, as a noun, a handle is something by which we grasp or open up something. Lastly, handle also has a Nordic root, here meaning to trade, bargain or deal. Together all four...... meanings seem to merge in the fashion design process, thus opening up for an embodied engagement with matter that entails direction giving, organizational management and negotiation. By seeing processes of handling as a key fashion methodological practice, it is possible to divert the discourse away from...... introduces four ways whereby fashion designers apply their own bodies as tools for design; a) re-activating past garment-design experiences, b) testing present garment-design experiences c) probing for new garment-design experiences and d) design of future garment experiences by body proxy. The paper...

Understanding how to maintain compliance in the current regulatory climate

International Nuclear Information System (INIS)

Bignell, D.T.; Burns, R.

1995-01-01

High level radioactive waste facilities must maintain compliance with all regulatory requirements, even those requirements that have been promulgated after the facility was placed into operation. Facilities must aggressively pursue compliance because environmental laws often impose strict liability for violations; therefore, an honest mistake is no defense. Radioactive waste management is constantly under the public microscope, particularly those facilities that handle high-level radioactive waste. The Savannah River Site has effectively met the challenges of regulatory compliance in its HLRW facilities and plans are being formulated to meet future regulatory requirements as well. Understanding, aggressively achieving, and clearly demonstrating compliance is essential for the continued operations of radioactive waste management facilities. This paper examines how HLRW facilities are impacted by regulatory requirements and how compliance in this difficult area is achieved and maintained

Remote-Handled Low-Level Waste Disposal Project Alternatives Analysis

Energy Technology Data Exchange (ETDEWEB)

David Duncan

2011-04-01

This report identifies, evaluates, and compares alternatives for meeting the U.S. Department of Energy’s mission need for management of remote-handled low-level waste generated by the Idaho National Laboratory and its tenants. Each alternative identified in the Mission Need Statement for the Remote-Handled Low-Level Waste Treatment Project is described and evaluated for capability to fulfill the mission need. Alternatives that could meet the mission need are further evaluated and compared using criteria of cost, risk, complexity, stakeholder values, and regulatory compliance. The alternative for disposal of remote-handled low-level waste that has the highest confidence of meeting the mission need and represents best value to the government is to build a new disposal facility at the Idaho National Laboratory Site.

Remote-Handled Low Level Waste Disposal Project Alternatives Analysis

Energy Technology Data Exchange (ETDEWEB)

David Duncan

2010-10-01

This report identifies, evaluates, and compares alternatives for meeting the U.S. Department of Energy’s mission need for management of remote-handled low-level waste generated by the Idaho National Laboratory and its tenants. Each alternative identified in the Mission Need Statement for the Remote-Handled Low-Level Waste Treatment Project is described and evaluated for capability to fulfill the mission need. Alternatives that could meet the mission need are further evaluated and compared using criteria of cost, risk, complexity, stakeholder values, and regulatory compliance. The alternative for disposal of remote-handled low-level waste that has the highest confidence of meeting the mission need and represents best value to the government is to build a new disposal facility at the Idaho National Laboratory Site.

Remote-Handled Low-Level Waste Disposal Project Alternatives Analysis

Energy Technology Data Exchange (ETDEWEB)

David Duncan

2011-03-01

This report identifies, evaluates, and compares alternatives for meeting the U.S. Department of Energy’s mission need for management of remote-handled low-level waste generated by the Idaho National Laboratory and its tenants. Each alternative identified in the Mission Need Statement for the Remote-Handled Low-Level Waste Treatment Project is described and evaluated for capability to fulfill the mission need. Alternatives that could meet the mission need are further evaluated and compared using criteria of cost, risk, complexity, stakeholder values, and regulatory compliance. The alternative for disposal of remote-handled low-level waste that has the highest confidence of meeting the mission need and represents best value to the government is to build a new disposal facility at the Idaho National Laboratory Site.

Remote-Handled Low-Level Waste Disposal Project Alternatives Analysis

Energy Technology Data Exchange (ETDEWEB)

David Duncan

2010-06-01

This report identifies, evaluates, and compares alternatives for meeting the U.S. Department of Energy’s mission need for management of remote-handled low-level waste generated by the Idaho National Laboratory and its tenants. Each alternative identified in the Mission Need Statement for the Remote-Handled Low-Level Waste Treatment Project is described and evaluated for capability to fulfill the mission need. Alternatives that could meet the mission need are further evaluated and compared using criteria of cost, risk, complexity, stakeholder values, and regulatory compliance. The alternative for disposal of remote-handled low-level waste that has the highest confidence of meeting the mission need and represents best value to the government is to build a new disposal facility at the Idaho National Laboratory Site.

21 CFR 203.32 - Drug sample storage and handling requirements.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Drug sample storage and handling requirements. 203.32 Section 203.32 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... contamination, deterioration, and adulteration. (b) Compliance with compendial and labeling requirements...

Integration of Value Stream Map and Healthcare Failure Mode and Effect Analysis into Six Sigma Methodology to Improve Process of Surgical Specimen Handling.

Science.gov (United States)

Hung, Sheng-Hui; Wang, Pa-Chun; Lin, Hung-Chun; Chen, Hung-Ying; Su, Chao-Ton

2015-01-01

Specimen handling is a critical patient safety issue. Problematic handling process, such as misidentification (of patients, surgical site, and specimen counts), specimen loss, or improper specimen preparation can lead to serious patient harms and lawsuits. Value stream map (VSM) is a tool used to find out non-value-added works, enhance the quality, and reduce the cost of the studied process. On the other hand, healthcare failure mode and effect analysis (HFMEA) is now frequently employed to avoid possible medication errors in healthcare process. Both of them have a goal similar to Six Sigma methodology for process improvement. This study proposes a model that integrates VSM and HFMEA into the framework, which mainly consists of define, measure, analyze, improve, and control (DMAIC), of Six Sigma. A Six Sigma project for improving the process of surgical specimen handling in a hospital was conducted to demonstrate the effectiveness of the proposed model.

Utilization of handheld computing to simplify compliance

International Nuclear Information System (INIS)

Galvin, G.; Rasmussen, J.; Haines, A.

2008-01-01

Monitoring job site performance and building a continually improving organization is an ongoing challenge for operators of process and power generation facilities. Stakeholders need to accurately capture records of quality and safety compliance, job progress, and operational experiences (OPEX). This paper explores the use of technology-enabled processes as a means for simplifying compliance to quality, safety, administrative, maintenance and operations activities. The discussion will explore a number of emerging technologies and their application to simplifying task execution and process compliance. This paper will further discuss methodologies to further refine processes through trending improvements in compliance and continually optimizing and simplifying through the use of technology. (author)

Integration of Value Stream Map and Healthcare Failure Mode and Effect Analysis into Six Sigma Methodology to Improve Process of Surgical Specimen Handling

Directory of Open Access Journals (Sweden)

Sheng-Hui Hung

2015-01-01

Full Text Available Specimen handling is a critical patient safety issue. Problematic handling process, such as misidentification (of patients, surgical site, and specimen counts, specimen loss, or improper specimen preparation can lead to serious patient harms and lawsuits. Value stream map (VSM is a tool used to find out non-value-added works, enhance the quality, and reduce the cost of the studied process. On the other hand, healthcare failure mode and effect analysis (HFMEA is now frequently employed to avoid possible medication errors in healthcare process. Both of them have a goal similar to Six Sigma methodology for process improvement. This study proposes a model that integrates VSM and HFMEA into the framework, which mainly consists of define, measure, analyze, improve, and control (DMAIC, of Six Sigma. A Six Sigma project for improving the process of surgical specimen handling in a hospital was conducted to demonstrate the effectiveness of the proposed model.

Tools and methodologies to support more sustainable biofuel feedstock production.

Science.gov (United States)

Dragisic, Christine; Ashkenazi, Erica; Bede, Lucio; Honzák, Miroslav; Killeen, Tim; Paglia, Adriano; Semroc, Bambi; Savy, Conrad

2011-02-01

Increasingly, government regulations, voluntary standards, and company guidelines require that biofuel production complies with sustainability criteria. For some stakeholders, however, compliance with these criteria may seem complex, costly, or unfeasible. What existing tools, then, might facilitate compliance with a variety of biofuel-related sustainability criteria? This paper presents four existing tools and methodologies that can help stakeholders assess (and mitigate) potential risks associated with feedstock production, and can thus facilitate compliance with requirements under different requirement systems. These include the Integrated Biodiversity Assessment Tool (IBAT), the ARtificial Intelligence for Ecosystem Services (ARIES) tool, the Responsible Cultivation Areas (RCA) methodology, and the related Biofuels + Forest Carbon (Biofuel + FC) methodology.

Renewal of handling and storage equipment in wholesale company

Directory of Open Access Journals (Sweden)

Tânia Brasileiro Azevedo Teixeira

2015-06-01

Full Text Available This paper presents a use of methodology for renewing handling and storage equipment in a wholesale company. It is based on equipment maintenance, downtime and possession costs. With the analysis performed,, it was possible to make some suggestions for an optimal economic point for pallets replacement. The methodology is based on mathematical and economic principles in order to provide the organization with an increase in productivity and costs reduction for handling and storage equipment. As a result of the use of methodology, the conclusion that it was possible to consider that this point is obtained when the total annual cost is equal to the average total cost was reached. Therefore, the equilibrium point is achieved when the equipment usage time is six years.

Parental compliance - an emerging problem in Liverpool community child health surveys 1991-2006

Directory of Open Access Journals (Sweden)

Koshy Gibby

2012-04-01

Full Text Available Abstract Background Compliance is a critical issue for parental questionnaires in school based epidemiological surveys and high compliance is difficult to achieve. The objective of this study was to determine trends and factors associated with parental questionnaire compliance during respiratory health surveys of school children in Merseyside between 1991 and 2006. Methods Four cross-sectional respiratory health surveys employing a core questionnaire and methodology were conducted in 1991, 1993, 1998 and 2006 among 5-11 year old children in the same 10 schools in Bootle and 5 schools in Wallasey, Merseyside. Parental compliance fell sequentially in consecutive surveys. This analysis aimed to determine the association of questionnaire compliance with variation in response rates to specific questions across surveys, and the demographic profiles for parents of children attending participant schools. Results Parental questionnaire compliance was 92% (1872/2035 in 1991, 87.4% (3746/4288 in 1993, 78.1% (1964/2514 in 1998 and 30.3% (1074/3540 in 2006. The trend to lower compliance in later surveys was consistent across all surveyed schools. Townsend score estimations of socio-economic status did not differ between schools with high or low questionnaire compliance and were comparable across the four surveys with only small differences between responders and non-responders to specific core questions. Respiratory symptom questions were mostly well answered with fewer than 15% of non-responders across all surveys. There were significant differences between mean child age, maternal and paternal smoking prevalence, and maternal employment between the four surveys (all p Conclusion Methodological differences or changes in socio-economic status of respondents between surveys were unlikely to explain compliance differences. Changes in maternal employment patterns may have been contributory. This analysis demonstrates a major shift in community parental

Input-Admittance Passivity Compliance for Grid-Connected Converters with LCL Filter

DEFF Research Database (Denmark)

Diaz, Enrique Rodriguez; Freijedo, Francisco D.; Guerrero, Josep M.

2018-01-01

This work presents a design methodology and its experimental validation for the input-admittance passivity compliance of LCL grid-connected converters. The designs of the LCL filter parameters and discrete controller are addressed systematically, and suitable design guidelines are provided......-admittance passivity compliance....

Remote-handled transuranic waste study

International Nuclear Information System (INIS)

1995-10-01

The Waste Isolation Pilot Plant (WIPP) was developed by the US Department of Energy (DOE) as a research and development facility to demonstrate the safe disposal of transuranic (TRU) radioactive wastes generated from the Nation's defense activities. The WIPP disposal inventory will include up to 250,000 cubic feet of TRU wastes classified as remote handled (RH). The remaining inventory will include contact-handled (CH) TRU wastes, which characteristically have less specific activity (radioactivity per unit volume) than the RH-TRU wastes. The WIPP Land Withdrawal Act (LWA), Public Law 102-579, requires a study of the effect of RH-TRU waste on long-term performance. This RH-TRU Waste Study has been conducted to satisfy the requirements defined by the LWA and is considered by the DOE to be a prudent exercise in the compliance certification process of the WIPP repository. The objectives of this study include: conducting an evaluation of the impacts of RH-TRU wastes on the performance assessment (PA) of the repository to determine the effects of Rh-TRU waste as a part of the total WIPP disposal inventory; and conducting a comparison of CH-TRU and RH-TRU wastes to assess the differences and similarities for such issues as gas generation, flammability and explosiveness, solubility, and brine and geochemical interactions. This study was conducted using the data, models, computer codes, and information generated in support of long-term compliance programs, including the WIPP PA. The study is limited in scope to post-closure repository performance and includes an analysis of the issues associated with RH-TRU wastes subsequent to emplacement of these wastes at WIPP in consideration of the current baseline design. 41 refs

Operation room tool handling and miscommunication scenarios: an object-process methodology conceptual model.

Science.gov (United States)

Wachs, Juan P; Frenkel, Boaz; Dori, Dov

2014-11-01

Errors in the delivery of medical care are the principal cause of inpatient mortality and morbidity, accounting for around 98,000 deaths in the United States of America (USA) annually. Ineffective team communication, especially in the operation room (OR), is a major root of these errors. This miscommunication can be reduced by analyzing and constructing a conceptual model of communication and miscommunication in the OR. We introduce the principles underlying Object-Process Methodology (OPM)-based modeling of the intricate interactions between the surgeon and the surgical technician while handling surgical instruments in the OR. This model is a software- and hardware-independent description of the agents engaged in communication events, their physical activities, and their interactions. The model enables assessing whether the task-related objectives of the surgical procedure were achieved and completed successfully and what errors can occur during the communication. The facts used to construct the model were gathered from observations of various types of operations miscommunications in the operating room and its outcomes. The model takes advantage of the compact ontology of OPM, which is comprised of stateful objects - things that exist physically or informatically, and processes - things that transform objects by creating them, consuming them or changing their state. The modeled communication modalities are verbal and non-verbal, and errors are modeled as processes that deviate from the "sunny day" scenario. Using OPM refinement mechanism of in-zooming, key processes are drilled into and elaborated, along with the objects that are required as agents or instruments, or objects that these processes transform. The model was developed through an iterative process of observation, modeling, group discussions, and simplification. The model faithfully represents the processes related to tool handling that take place in an OR during an operation. The specification is at

Federal facilities compliance act waste management

International Nuclear Information System (INIS)

Bowers, J.; Gates-Anderson, D.; Hollister, R.; Painter, S.

1999-01-01

Site Treatment Plans (STPs) developed through the Federal Facilities Compliance Act pose many technical and administrative challenges. Legacy wastes managed under these plans require Land Disposal Restriction (LDR) compliance through treatment and ultimate disposal. Although capacity has been defined for most of the Department of Energy wastes, many waste streams require further characterization and many need additional treatment and handling beyond LDR criteria to be able to dispose of the waste. At Lawrence Livermore National Laboratory (LLNL), the Hazardous Waste Management Division has developed a comprehensive Legacy Waste Program. The program directs work to manage low level and mixed wastes to ensure compliance with nuclear facility rules and its STP. This paper provides a survey of work conducted on these wastes at LLNL. They include commercial waste treatment and disposal, diverse forms of characterization, inventory maintenance and reporting, on-site treatment, and treatability studies. These activities are conducted in an integrated fashion to meet schedules defined in the STP. The processes managing wastes are dynamic due to required integration of administrative, regulatory, and technical concerns spanning the gamut to insure safe proper disposal

COMPLIANCE AS FACTORING BUSINESS RISK MANAGEMENT: CONTROL ASPECTS

OpenAIRE

V.K. Makarovych

2016-01-01

Indetermination of modern economy conditions and the lack of theoretical knowledge gained by domestic scientists about risk in factoring business actualize the research concerning the methodology and technique of factoring companies’ risk management. The article examines compliance which is the technology innovative for Ukrainian market of factoring risk management technologies. It is determined that the compliance is the risk management process directed to free will correspondence to sta...

MHSS: a material handling system simulator

Energy Technology Data Exchange (ETDEWEB)

Pomernacki, L.; Hollstien, R.B.

1976-04-07

A Material Handling System Simulator (MHSS) program is described that provides specialized functional blocks for modeling and simulation of nuclear material handling systems. Models of nuclear fuel fabrication plants may be built using functional blocks that simulate material receiving, storage, transport, inventory, processing, and shipping operations as well as the control and reporting tasks of operators or on-line computers. Blocks are also provided that allow the user to observe and gather statistical information on the dynamic behavior of simulated plants over single or replicated runs. Although it is currently being developed for the nuclear materials handling application, MHSS can be adapted to other industries in which material accountability is important. In this paper, emphasis is on the simulation methodology of the MHSS program with application to the nuclear material safeguards problem. (auth)

Energy-saving methodology for material handling applications

Energy Technology Data Exchange (ETDEWEB)

Makris, P.A.; Makri, A.P.; Provatidis, C.G. [National Technical University of Athens, School of Mechanical Engineering, Mechanical Design and Control Systems Division, 9 Iroon Polytechniou Street, Zografou Campus, GR-15773 Athens (Greece)

2006-10-15

This paper presents an energy saving approach to the problem of order picking in warehousing environment, which is directly related to the well-known Traveling Salesman Problem (TSP). While the available heuristic algorithms for the order-picking problem search for the route that minimizes the travel time, here the problem is addressed from the energy saving point of view. In a few words, the least energy-consuming route is identified in order to quantify the trade off in time and energy between the fastest route and the most energy economic one. Keeping in mind that often energy is as important as time, especially during a low-demand period, the current paper sheds some light into a two dimensional way of addressing the warehouse material handling problem, which saves time as well as energy. A very interesting finding is that a relatively small loss of service time in many cases may lead to a significant decrease of consumed energy without any additional cost. (author)

Compliance and Cognitive Function: A Methodological Approach to Measuring Unintentional Errors in Medication Compliance in the Elderly.

Science.gov (United States)

Isaac, Lisa M.; And Others

1993-01-01

Assessed multiple aspects of cognitive performance, medication planning ability, and medication compliance in 20 elderly outpatients. Findings suggest that aspects of attention/concentration, visual and verbal memory, and motor function which are untapped by simple mental status assessment are related to medication access, planning, and compliance…

Compliance Framing - Framing Compliance

OpenAIRE

Lutz-Ulrich Haack; Martin C. Reimann

2012-01-01

Corporations have to install various organizational measures to comply with legal as well as internal guidelines systematically. Compliance management systems have the challenging task to make use of an internal compliance-marketing approach in order to ensure not only an adequate but also effective compliance-culture. Compliance-literature and findings of persuasive goal-framing-theory give opposite implications for establishing a rather values- versus rule-based compliance-culture respectiv...

76 FR 33277 - Proposed Approval of the Central Characterization Project's Remote-Handled Transuranic Waste...

Science.gov (United States)

2011-06-08

... disposal of TRU radioactive waste. As defined by the WIPP Land Withdrawal Act (LWA) of 1992 (Pub. L. 102... certification of the WIPP's compliance with disposal regulations for TRU radioactive waste [63 Federal Register... radioactive remote-handled (RH) transuranic (TRU) waste characterization program implemented by the Central...

ADVANCING TECHNOLOGY AND METHODOLOGY TO STREAMLINE ENVIRONMENTAL COMPLIANCE

Energy Technology Data Exchange (ETDEWEB)

Ben Grunewald; Paul Jehn

2002-11-15

By early 2000, fifteen oil and gas State Agencies were using RBDMS or a RBDMS utility to handle a significant amount or all of their data management needs. There are three additional State slated to begin implementation this year. There are an additional twelve State agencies that are not utilizing this technology that have proven to be very useful for so many other States. This project will allow for the base RBDMS install in all State oil and gas agency that desire it.

Estimating the Compliance Cost of the U.S. Individual Income Tax

OpenAIRE

Guyton, John L.; O'Hare, John F.; Stavrianos, Michael P.; Toder, Eric J.

2003-01-01

This paper focuses on the design, development, and use of the Individual Taxpayer Burden Model (ITBM) -- a microsimulation model developed jointly by IBM and the IRS to estimate the amount of time and money that individuals spend on federal tax compliance. First, the authors summarize the methodology that was used to define, measure, and model tax compliance burden. Next, they present estimates of overall compliance burden, and results from a simulation of economic and policy changes that too...

Waste Handling Equipment Development Test and Evaluation Study

International Nuclear Information System (INIS)

R.L. Tome

1998-01-01

The purpose of this study is to identify candidate Monitored Geologic Repository (MGR) surface waste handling equipment for development testing. This study will also identify strategies for performing the development tests. Development testing shall be implemented to support detail design and reduce design risks. Development testing shall be conducted to confirm design concepts, evaluate alternative design concepts, show the availability of needed technology, and provide design documentation. The candidate equipment will be selected from MGR surface waste handling equipment that is the responsibility of the Management and Operating Contractor (M and O) Surface Design Department. The equipment identified in this study is based on Viability Assessment (VA) design. The ''Monitored Geologic Repository Test and Evaluation Plan'' (MGR T and EP), Reference 5.1, was used as a basis for this study. The MGR T and EP reflects the extent of test planning and analysis that can be conducted, given the current status of the MGR requirements and latest VA design information. The MGR T and EP supports the appropriate sections in the license application (LA) in accordance with 10 CFR 60.2 1(c)(14). The MGR T and EP describes the following test activities: site characterization to confirm, by test and analysis, the suitability of the Yucca Mountain site for housing a geologic repository; development testing to investigate and document design concepts to reduce risk; qualification testing to verify equipment compliance with design requirements, specifications, and regulatory requirements; system testing to validate compliance with MGR requirements, which include the receipt, handling, retrieval, and disposal of waste; periodic performance testing to verify preclosure requirements and to demonstrate safe and reliable MGR operation; and performance confirmation modeling, testing, and analysis to verify adherence to postclosure regulatory requirements. Development test activities can be

Preventing nosocomial infections: improving compliance with standard precautions in an Indonesian teaching hospital.

NARCIS (Netherlands)

Duerink, D.O.; Farida, H.; Nagelkerke, N.J.; Wahyono, H.; Keuter, M.; Lestari, E.S.; Hadi, U.; Broek, P.J.J.A. van den

2006-01-01

Standard precautions can prevent transmission of micro-organisms. This study investigated hand hygiene, handling of needles and use of personal protective equipment in an Indonesian teaching hospital, and performed a multi-faceted intervention study to improve compliance. An intervention was

Applying HAZOP analysis in assessing remote handling compatibility of ITER port plugs

NARCIS (Netherlands)

Duisings, L. P. M.; van Til, S.; Magielsen, A. J.; Ronden, D. M. S.; Elzendoorn, B. S. Q.; Heemskerk, C. J. M.

2013-01-01

This paper describes the application of a Hazard and Operability Analysis (HAZOP) methodology in assessing the criticality of remote handling maintenance activities on port plugs in the ITER Hot Cell facility. As part of the ECHUL consortium, the remote handling team at the DIFFER Institute is

Student manual, Book 2: Orientation to occupational safety compliance in DOE

Energy Technology Data Exchange (ETDEWEB)

Colley, D.L.

1993-10-01

This is a student hand-book an Occupational Safety Compliance in DOE. Topics include the following: Electrical; materials handling & storage; inspection responsibilities & procedures; general environmental controls; confined space entry; lockout/tagout; office safety, ergonomics & human factors; medical & first aid, access to records; construction safety; injury/illness reporting system; and accident investigation procedures.

Compliance Parameters through Risk Analysis Methodology for Strict Liability Mitigation According to the Law Anti- Corruption (12.846 / 2013 Regarding Public Business

Directory of Open Access Journals (Sweden)

Beatriz Miranda Batisti

2016-11-01

Full Text Available The Law 12,846 / 2013 has the scope to fight it and enable companies to become active agents in this intent. The repressive aspect of the legislation can be mitigated if the company adopts strategies of prevention through compliance programs. The preventive effectiveness of this law will depend on the analysis of legal aspects and business management topics. The risk analysis methodology and the adoption of objective parameters for the management of anti-corruption risks, allows companies to build an integrity program that puts in focus the ethical actions necessary for companies willing to negotiate with the government.

Student manual, Book 2: Orientation to occupational safety compliance in DOE

International Nuclear Information System (INIS)

Colley, D.L.

1993-01-01

This is a student hand-book an Occupational Safety Compliance in DOE. Topics include the following: Electrical; materials handling ampersand storage; inspection responsibilities ampersand procedures; general environmental controls; confined space entry; lockout/tagout; office safety, ergonomics ampersand human factors; medical ampersand first aid, access to records; construction safety; injury/illness reporting system; and accident investigation procedures

A design methodology for unattended monitoring systems

International Nuclear Information System (INIS)

SMITH, JAMES D.; DELAND, SHARON M.

2000-01-01

The authors presented a high-level methodology for the design of unattended monitoring systems, focusing on a system to detect diversion of nuclear materials from a storage facility. The methodology is composed of seven, interrelated analyses: Facility Analysis, Vulnerability Analysis, Threat Assessment, Scenario Assessment, Design Analysis, Conceptual Design, and Performance Assessment. The design of the monitoring system is iteratively improved until it meets a set of pre-established performance criteria. The methodology presented here is based on other, well-established system analysis methodologies and hence they believe it can be adapted to other verification or compliance applications. In order to make this approach more generic, however, there needs to be more work on techniques for establishing evaluation criteria and associated performance metrics. They found that defining general-purpose evaluation criteria for verifying compliance with international agreements was a significant undertaking in itself. They finally focused on diversion of nuclear material in order to simplify the problem so that they could work out an overall approach for the design methodology. However, general guidelines for the development of evaluation criteria are critical for a general-purpose methodology. A poor choice in evaluation criteria could result in a monitoring system design that solves the wrong problem

Spent fuel cask handling at an operating nuclear power plant

International Nuclear Information System (INIS)

Pal, A.C.

1988-01-01

The importance of spent fuel handling at operating nuclear power plants cannot be overstated. Because of its highly radioactive nature, however, spent fuel must be handled in thick, lead-lined containers or casks. Thus, all casks for spent fuel handling are heavy loads by the US Nuclear Regulatory Commission's definition, and any load-drop must be evaluated for its potential to damage safety-related equipment. Nuclear Regulatory Guide NUREG-0612 prescribes the regulatory requirements of alternative heavy-load-handling methodologies such as (a) by providing cranes that meet the requirements of NUREG-0554, which shall be called the soft path, or (b) by providing protective devices at all postulated load-drop areas to prevent any damage to safety-related equipment, which shall be called the hard path. The work reported in this paper relates to cask handling at New York Power Authority's James A. FitzPatrick (JAF) plant

Incorporating Handling Qualities Analysis into Rotorcraft Conceptual Design

Science.gov (United States)

Lawrence, Ben

2014-01-01

This paper describes the initial development of a framework to incorporate handling qualities analyses into a rotorcraft conceptual design process. In particular, the paper describes how rotorcraft conceptual design level data can be used to generate flight dynamics models for handling qualities analyses. Also, methods are described that couple a basic stability augmentation system to the rotorcraft flight dynamics model to extend analysis to beyond that of the bare airframe. A methodology for calculating the handling qualities characteristics of the flight dynamics models and for comparing the results to ADS-33E criteria is described. Preliminary results from the application of the handling qualities analysis for variations in key rotorcraft design parameters of main rotor radius, blade chord, hub stiffness and flap moment of inertia are shown. Varying relationships, with counteracting trends for different handling qualities criteria and different flight speeds are exhibited, with the action of the control system playing a complex part in the outcomes. Overall, the paper demonstrates how a broad array of technical issues across flight dynamics stability and control, simulation and modeling, control law design and handling qualities testing and evaluation had to be confronted to implement even a moderately comprehensive handling qualities analysis of relatively low fidelity models. A key outstanding issue is to how to 'close the loop' with an overall design process, and options for the exploration of how to feedback handling qualities results to a conceptual design process are proposed for future work.

Proposal of inspection methodology for environment radiological control; Proposta de metodologia de inspecao para controle radiologico ambiental

Energy Technology Data Exchange (ETDEWEB)

Martins, Nadia Soido Falcao

2005-07-01

The Radiation Protection and Dosimetry Institute (IRD) of the Brazilian Nuclear Energy Commission (CNEN) is in charge of verifying that the self-monitoring operator is effective to control the radiological quality of environmental around the nuclear facilities and carried out in accordance with the regulatory requirements. While a long time, the verification of compliance was kept by the conduction of large scale monitoring programs around all the authorized installations. The IRD decided to reformulate its performance behavior, starting another kind of control program, due to the number increase of nuclear installations and the diversity of activities conducted by the operators. This program, so-called Monitoring Control Program (PCM) is a regulatory activity developed by the Environmental Impact Assessment Service (SEAIA) of IRD and has the aim of check the effectiveness of authorized self-control. Actually the regulatory control of environmental radiological integrity around the authorized nuclear installation essentially depends on the effectiveness of regulatory inspections fulfilled by the SEAIA/IRD. Due to the implementation of modern practices of management in the IRD, specially the quality management system on regulatory inspection activities, emerged the need of unify these actions. It was also necessary to establish standard procedures required for inspection conduction. This work proposes one methodology for the inspections of environmental radiological control suitable to assure the compliance and effectiveness of environmental and effluent monitoring programs conducted by the operator, through the systematic verification of compliance and data quality assessment. The proposed methodology seeks to attend the appeals for high control standards of environment protection and public health. Here, we presented as products of this work: The inspection handbook and checklists for inspections; one framework for sampling, handling, recording and reporting of

Efficient compliance with prescribed bounds on operational parameters by means of hypothesis testing using reactor data

International Nuclear Information System (INIS)

Sermer, P.; Olive, C.; Hoppe, F.M.

2000-01-01

- A common problem in any reactor operations is to comply with a requirement that certain operational parameters are constrained to lie within some prescribed bounds. The fundamental issue which is to be addressed in any compliance description can be stated as follows: The compliance definition, compliance procedures and allowances for uncertainties in data and accompanying methodologies, should be well defined and justifiable. To this end, a mathematical framework for compliance, in which the computed or measured estimates of process parameters are considered random variables, is described in this paper. This allows a statistical formulation of the definition of compliance with licence or otherwise imposed limits. An important aspect of the proposed methodology is that the derived statistical tests are obtained by a Monte Carlo procedure using actual reactor operational data. The implementation of the methodology requires a routine surveillance of the reactor core in order to perform the underlying statistical tests. The additional work required for surveillance is balanced by the fact that the resulting actions on the reactor operations, implemented in station procedures, make the reactor 'safer' by increasing the operating margins. Furthermore, increased margins are also achieved by efficient solution techniques which may allow an increase in reactor power. A rigorous analysis of a compliance problem using statistical hypothesis testing based on extreme value probability distributions and actual reactor operational data leads to effective solutions in the areas of licensing, nuclear safety, reliability and competitiveness of operating nuclear reactors. (author)

Certification plan transuranic waste: Hazardous Waste Handling Facility

International Nuclear Information System (INIS)

1992-06-01

The purpose of this plan is to describe the organization and methodology for the certification of transuranic (TRU) waste handled in the Hazardous Waste Handling Facility at Lawrence Berkeley Laboratory (LBL). The plan incorporates the applicable elements of waste reduction, which include both up-front minimization and end-product treatment to reduce the volume and toxicity of the waste; segregation of the waste as it applies to certification; an executive summary of the Quality Assurance Implementing Management Plan (QAIMP) for the HWBF; and a list of the current and planned implementing procedures used in waste certification

Digital virtual flight testing and evaluation method for flight characteristics airworthiness compliance of civil aircraft based on HQRM

Directory of Open Access Journals (Sweden)

Fan Liu

2015-02-01

Full Text Available In order to incorporate airworthiness requirements for flight characteristics into the entire development cycle of electronic flight control system (EFCS equipped civil aircraft, digital virtual flight testing and evaluation method based on handling qualities rating method (HQRM is proposed. First, according to HQRM, flight characteristics airworthiness requirements of civil aircraft in EFCS failure states are determined. On this basis, digital virtual flight testing model, comprising flight task digitized model, pilot controlling model, aircraft motion and atmospheric turbulence model, is used to simulate the realistic process of a pilot controlling an airplane to perform assigned flight tasks. According to the simulation results, flight characteristics airworthiness compliance of the airplane can be evaluated relying on the relevant regulations for handling qualities (HQ rating. Finally, this method is applied to a type of passenger airplane in a typical EFCS failure state, and preliminary conclusions concerning airworthiness compliance are derived quickly. The research results of this manuscript can provide important theoretical reference for EFCS design and actual airworthiness compliance verification of civil aircraft.

COMPLIANCE AS FACTORING BUSINESS RISK MANAGEMENT: CONTROL ASPECTS

Directory of Open Access Journals (Sweden)

V.K. Makarovych

2016-03-01

Full Text Available Indetermination of modern economy conditions and the lack of theoretical knowledge gained by domestic scientists about risk in factoring business actualize the research concerning the methodology and technique of factoring companies’ risk management. The article examines compliance which is the technology innovative for Ukrainian market of factoring risk management technologies. It is determined that the compliance is the risk management process directed to free will correspondence to state, international legislation as well as to the ethics standards accepted in the field of regulated legal relations and to the traditions of business circulation to sustain the necessary regulations and standards of market behaviour, and to consolidate the image of a factoring company. Compliance risks should be understood as the risks of missed profit or losses caused by the conflicts of interests and the discrepancy of employees’ actions to internal and external standard documents. The attention is paid to the control over the compliance. The author singles out 3 kinds of the compliance control such as institutional, operational and the compliance control over the observance of conducting business professional ethics regulations which are necessary for providing of efficient management of factoring business risks. The paper shows the organizing process of factoring business compliance control (by the development of internal standard documents, a compliance program, the foundation of compliance control subdivision, monitoring of the risks cause the choice, made by management entities of a factoring company, of the management methods of risks for their business. The development of new and improvement of existed forms of compliance control organizing process help satisfy users’ information needs and requests of the risk management factoring company department. The suggestions proposed create the grounds for the transformation and improvement of factoring

Compliance with building energy regulations for new-build dwellings

International Nuclear Information System (INIS)

Pan, Wei; Garmston, Helen

2012-01-01

Despite increasingly stringent building energy regulations worldwide, non-compliance exists in practice. This paper examines the profile of compliance with building energy regulations for new-build dwellings. In total 404 new-build dwellings completed in the UK from 2006 to 2009 were investigated. Only a third of these dwellings were evidenced as being compliant with Building Regulations Part L (England and Wales). Such low compliance casts a serious concern over the achievability of the UK Government's target for all new-build homes to be ‘zero carbon’ from 2016. Clearly evidenced was a lack of knowledge of Part L and its compliance requirements among the supply and building control sides of new-build dwellings. The results also indicate that the compliance profile was influenced by factors including Standard Assessment Procedure (UK Government's methodology for energy efficiency) calculation submissions, learning and experience of builders and building controls with Part L, use of Part L1A checklist, the introduction of energy performance certificate (EPC), build method, dwelling type, and project size. Better compliance was associated with flats over houses and timber frame over masonry. The use of EPC and Part L1A checklist should be encouraged. Key to addressing the lack of compliance with building energy regulations is training. -- Highlights: ► There exists a lack of compliance, worldwide, with building energy regulations. ► The implementation of England and Wales building energy regulations is problematic. ► Training, learning and experience of builders and building control are critical. ► Energy performance certificate and Part L 2006 checklist helped achieve compliance. ► Flats achieved better compliance over houses; and timber frame over masonry.

Evaluation of replacement tritium facility (RTF) compliance with DOE safety goals using probabilistic consequence assessment methodology

International Nuclear Information System (INIS)

O'Kula, K.R.; East, J.M.; Moore, M.L.

1993-01-01

The Savannah River Site (SRS), operated by the Westinghouse Savannah River Company (WSRC) for the US Department of Energy (DOE), is a major center for the processing of nuclear materials for national defense, deep-space exploration, and medical treatment applications in the United States. As an integral part of the DOE's effort to modernize facilities, implement improved handling and processing technology, and reduce operational risk to the general public and onsite workers, transition of tritium processing at SRS from the Consolidated Tritium Facility to the Replacement Tritium Facility (RTF) began in 1993. To ensure that operation of new DOE facilities such as RTF present minimum involuntary and voluntary risks to the neighboring public and workers, indices of risk have been established to serve as target levels or safety goals of performance for assessing nuclear safety. These goals are discussed from a historical perspective in the initial part of this paper. Secondly, methodologies to quantify risk indices are briefly described. Lastly, accident, abnormal event, and normal operation source terms from RTF are evaluated for consequence assessment purposes relative to the safety targets

The design of in-cell crane handling systems for nuclear plants

International Nuclear Information System (INIS)

Hansford, S.M.; Scott, R.

1992-01-01

The reprocessing and waste management facilities at (BNFL's) British Nuclear Fuels Limited's Sellafield site make extensive use of crane handling systems. These range from conventional mechanical handling operations as used generally in industry to high integrity applications through to remote robotic handling operations in radiation environments. This paper describes the design methodologies developed for the design of crane systems for remote handling operations - in-cell crane systems. In most applications the in-cell crane systems are an integral part of the plant process equipment and reliable and safe operations are a key design parameter. Outlined are the techniques developed to achieve high levels of crane system availability for operations in hazardous radiation environments. These techniques are now well established and proven through many years of successful plant operation. A recent application of in-cell crane handling systems design for process duty application is described. The benefits of a systematic design approach and a functionally-based engineering organization are also highlighted. (author)

Remote-Handled Transuranic Content Codes

Energy Technology Data Exchange (ETDEWEB)

Washington TRU Solutions

2006-12-01

The Remote-Handled Transuranic (RH-TRU) Content Codes (RH-TRUCON) document describes the inventory of RH-TRU waste within the transportation parameters specified by the Remote-Handled Transuranic Waste Authorized Methods for Payload Control (RH-TRAMPAC).1 The RH-TRAMPAC defines the allowable payload for the RH-TRU 72-B. This document is a catalog of RH-TRU 72-B authorized contents by site. A content code is defined by the following components: • A two-letter site abbreviation that designates the physical location of the generated/stored waste (e.g., ID for Idaho National Laboratory [INL]). The site-specific letter designations for each of the sites are provided in Table 1. • A three-digit code that designates the physical and chemical form of the waste (e.g., content code 317 denotes TRU Metal Waste). For RH-TRU waste to be transported in the RH-TRU 72-B, the first number of this three-digit code is “3.” The second and third numbers of the three-digit code describe the physical and chemical form of the waste. Table 2 provides a brief description of each generic code. Content codes are further defined as subcodes by an alpha trailer after the three-digit code to allow segregation of wastes that differ in one or more parameter(s). For example, the alpha trailers of the subcodes ID 322A and ID 322B may be used to differentiate between waste packaging configurations. As detailed in the RH-TRAMPAC, compliance with flammable gas limits may be demonstrated through the evaluation of compliance with either a decay heat limit or flammable gas generation rate (FGGR) limit per container specified in approved content codes. As applicable, if a container meets the watt*year criteria specified by the RH-TRAMPAC, the decay heat limits based on the dose-dependent G value may be used as specified in an approved content code. If a site implements the administrative controls outlined in the RH-TRAMPAC and Appendix 2.4 of the RH-TRU Payload Appendices, the decay heat or FGGR

Systematic handling of requirements and conditions (in compliance with waste acceptance requirements for a radioactive waste disposal facility)

International Nuclear Information System (INIS)

Keyser, Peter; Helander, Anita

2012-01-01

environment; iv) Aiding decision making on the authorization / licensing of radioactive waste disposal; and v) Facilitating communication amongst stakeholders on issues relating to the disposal facility. How can we ensure and control compliance with WAC during Pre-disposal activities? The link between the safety cases of Pre-disposal activities and the Disposal facility is primarily the Waste Acceptance Criteria (WAC), defined as 'those requirements that are to be met by conditioned radioactive wastes, forming packages, to be accepted at an Interim Storage or a Disposal Facility'. It is advised that also WAC should be set up for each stage of the pre-disposal activities in the Waste Management Plan or Strategy. Waste characterization requirements are typically developed from disposal performance assessment in addition to waste acceptance criteria (WAC), process control and quality assurance requirements, transportation requirements, and worker safety requirements. A matrix showing where each WAC originates can greatly assist with understanding the philosophy behind the overall characterization program and put the elements into context. The complexity of waste categorization requires the need for systematic handling of requirements and conditions during pre-disposal activities. How can we ensure the fulfillment of WAC for a radioactive waste disposal facility? Requirements management, sometimes called configuration management, is an area that recently has received increasing attention in the project management context. There exist international guidelines on the use of configuration management within an organization and it is applicable to the support of products from concept to disposal. It first outlines the responsibilities and authorities before describing the configuration management process that includes configuration management planning, configuration identification, change control, configuration status accounting and configuration audit. The methodology develops a

An analysis of repository waste-handling operations

International Nuclear Information System (INIS)

Dennis, A.W.

1990-09-01

This report has been prepared to document the operational analysis of waste-handling facilities at a geologic repository for high-level nuclear waste. The site currently under investigation for the geologic repository is located at Yucca Mountain, Nye County, Nevada. The repository waste-handling operations have been identified and analyzed for the year 2011, a steady-state year during which the repository receives spent nuclear fuel containing the equivalent of 3000 metric tons of uranium (MTU) and defense high-level waste containing the equivalent of 400 MTU. As a result of this analysis, it has been determined that the waste-handling facilities are adequate to receive, prepare, store, and emplace the projected quantity of waste on an annual basis. In addition, several areas have been identified where additional work is required. The recommendations for future work have been divided into three categories: items that affect the total waste management system, operations within the repository boundary, and the methodology used to perform operational analyses for repository designs. 7 refs., 48 figs., 11 tabs

Assessing Potential Energy Cost Savings from Increased Energy Code Compliance in Commercial Buildings

Energy Technology Data Exchange (ETDEWEB)

Rosenberg, Michael I.; Hart, Philip R.; Athalye, Rahul A.; Zhang, Jian; Wang, Weimin

2016-02-15

The US Department of Energy’s most recent commercial energy code compliance evaluation efforts focused on determining a percent compliance rating for states to help them meet requirements under the American Recovery and Reinvestment Act (ARRA) of 2009. That approach included a checklist of code requirements, each of which was graded pass or fail. Percent compliance for any given building was simply the percent of individual requirements that passed. With its binary approach to compliance determination, the previous methodology failed to answer some important questions. In particular, how much energy cost could be saved by better compliance with the commercial energy code and what are the relative priorities of code requirements from an energy cost savings perspective? This paper explores an analytical approach and pilot study using a single building type and climate zone to answer those questions.

Methods for handling uncertainty within pharmaceutical funding decisions

Science.gov (United States)

Stevenson, Matt; Tappenden, Paul; Squires, Hazel

2014-01-01

This article provides a position statement regarding decision making under uncertainty within the economic evaluation of pharmaceuticals, with a particular focus upon the National Institute for Health and Clinical Excellence context within England and Wales. This area is of importance as funding agencies have a finite budget from which to purchase a selection of competing health care interventions. The objective function generally used is that of maximising societal health with an explicit acknowledgement that there will be opportunity costs associated with purchasing a particular intervention. Three components of uncertainty are discussed within a pharmaceutical funding perspective: methodological uncertainty, parameter uncertainty and structural uncertainty, alongside a discussion of challenges that are particularly pertinent to health economic evaluation. The discipline has focused primarily on handling methodological and parameter uncertainty and a clear reference case has been developed for consistency across evaluations. However, uncertainties still remain. Less attention has been given to methods for handling structural uncertainty. The lack of adequate methods to explicitly incorporate this aspect of model development may result in the true uncertainty surrounding health care investment decisions being underestimated. Research in this area is ongoing as we review.

Flexible path optimization for the Cask and Plug Remote Handling System in ITER

Energy Technology Data Exchange (ETDEWEB)

Vale, Alberto, E-mail: avale@ipfn.ist.utl.pt [Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade Técnica de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa (Portugal); Fonte, Daniel; Valente, Filipe; Ferreira, João [Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade Técnica de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa (Portugal); Ribeiro, Isabel [Laboratório de Robótica e Sistemas em Engenharia e Ciência, Instituto Superior Técnico, Universidade Técnica de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa (Portugal); Gonzalez, Carmen [Fusion for Energy Agency (F4E), Torres Diagonal Litoral B3, Josep Pla 2, 08019 Barcelona (Spain)

2013-10-15

Highlights: ► Complementary approach for path optimization named free roaming that takes full advantage of the rhombic like kinematics of the Cask and Plug Remote Handling System (CPRHS). ► Possibility to find trajectories not possible in the past using the line guidance developed in a previous work, in particular when moving the Cask Transfer System (CTS) beneath the pallet or in rescue missions. ► Methodology that maximizes the common parts of different trajectories in the same level of ITER buildings. -- Abstract: The Cask and Plug Remote Handling System (CPRHS) provides the means for the remote transfer of in-vessel components and remote handling equipment between the Hot Cell Building and the Tokamak Building in ITER along pre-defined optimized trajectories. A first approach for CPRHS path optimization was previously proposed using line guidance as the navigation methodology to be adopted. This approach might not lead to feasible paths in new situations not considered during the previous work, as rescue operations. This paper addresses this problem by presenting a complementary approach for path optimization inspired in rigid body dynamics that takes full advantage of the rhombic like kinematics of the CPRHS. It also presents a methodology that maximizes the common parts of different trajectories in the same level of ITER buildings. The results gathered from 500 optimized trajectories are summarized. Conclusions and open issues are presented and discussed.

Space Telecommunications Radio System (STRS) Compliance Testing

Science.gov (United States)

Handler, Louis M.

2011-01-01

The Space Telecommunications Radio System (STRS) defines an open architecture for software defined radios. This document describes the testing methodology to aid in determining the degree of compliance to the STRS architecture. Non-compliances are reported to the software and hardware developers as well as the NASA project manager so that any non-compliances may be fixed or waivers issued. Since the software developers may be divided into those that provide the operating environment including the operating system and STRS infrastructure (OE) and those that supply the waveform applications, the tests are divided accordingly. The static tests are also divided by the availability of an automated tool that determines whether the source code and configuration files contain the appropriate items. Thus, there are six separate step-by-step test procedures described as well as the corresponding requirements that they test. The six types of STRS compliance tests are: STRS application automated testing, STRS infrastructure automated testing, STRS infrastructure testing by compiling WFCCN with the infrastructure, STRS configuration file testing, STRS application manual code testing, and STRS infrastructure manual code testing. Examples of the input and output of the scripts are shown in the appendices as well as more specific information about what to configure and test in WFCCN for non-compliance. In addition, each STRS requirement is listed and the type of testing briefly described. Attached is also a set of guidelines on what to look for in addition to the requirements to aid in the document review process.

Principle of accrual and compliance of income and expenses in accounting system

Directory of Open Access Journals (Sweden)

V.V. Travin

2017-12-01

Full Text Available The introduction of international accounting and financial reporting standards requires the deeper implementation of accounting principles, in particular, the principle of accrual and compliance costs. The current research has shown that its implementation helps to streamline the accounting process by reducing the need to verify the chosen methodology for compliance with other regulatory documents that regulate the peculiarities of accounting in various areas. The categories of «a system», «income» and «expenses» in the accounting system are investigated and their system characteristics are showed. The approach to realization of the principle of accrual and compliance of income and expenses in the accounting system is described and proposed. It involves the possibility of capitalizing costs in the value of stocks, non-current assets, in the form of receivables, or in the form of future periods. The capitalization of costs in value occurs when the costs are not considered as such, and are considered only as an increase in the asset, as an integral part of these or other values. The study takes into account the peculiarities of its influence on the methodology of accounting for financial results of the enterprise.

[Biosafety provision on handling pathogenic biological agents on the concept of biorisk assessment and management].

Science.gov (United States)

Dobrokhotskiĭ, O N; Kolombet, L V

2010-01-01

The paper shows it urgent to realize the concept of biological risk assessment and management on handling pathogenic biological agents (PBA). It gives a number of objective reasons that impede development of a methodology to assess laboratory biological risks. A concept of continuous improvement (a process approach) is proposed for use as a biorisk management tool for biosafety assurance when handling PBA. It is demonstrated that development of international cooperation urgently requires that national concepts and standards be harmonized with international regulatory documents on biosafety assurance on handling PBA.

Methodology in the handling of the waste radioactive material

International Nuclear Information System (INIS)

Emeterio H, M.

2013-10-01

The methodology in the management of radioactive waste is constituted by an administrative part and seven technical stages: transport, classification, segregation, conditioning, treatment, packages qualification and final disposition (storage). In their diverse stages the management deserves a special attention, due to the increment of the use and application of the nuclear energy and radioactive substances, for such a reason should be managed in such a way that the exposed personnel safety and the public in general is guaranteed, protecting the integrity of the environment. (Author)

28 CFR 73.4 - Partial compliance not deemed compliance.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Partial compliance not deemed compliance. 73.4 Section 73.4 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) NOTIFICATIONS TO THE ATTORNEY GENERAL BY AGENTS OF FOREIGN GOVERNMENTS § 73.4 Partial compliance not deemed compliance. The fact...

Potential Indoor Worker Exposure From Handling Area Leakage: Dose Calculation Methodology and Example Consequence Analysis

International Nuclear Information System (INIS)

Nes, Razvan; Benke, Roland R.

2008-01-01

The U.S. Department of Energy (DOE) is currently considering design options for preclosure facilities in a license application for a geologic repository for spent nuclear fuel and high-level radioactive waste at Yucca Mountain, Nevada. The Center for Nuclear Waste Regulatory Analyses (CNWRA) developed the PCSA Tool Version 3.0.0 software for the U.S. Nuclear Regulatory Commission (NRC) to aid in the regulatory review of a potential DOE license application. The objective of this paper is to demonstrate PCSA Tool modeling capabilities (i.e., a generic two-compartment, mass-balance model) for estimating radionuclide concentrations in air and radiological dose consequences to indoor workers in a control room from potential leakage of radioactively contaminated air from an adjacent handling area. The presented model computes internal and external worker doses from inhalation and submersion in a finite cloud of contaminated air in the control room and augments previous capabilities for assessing indoor worker dose. As a complement to the example event sequence frequency analysis in the companion paper, example consequence calculations are presented in this paper for the postulated event sequence. In conclusion: this paper presents a model for estimating radiological doses to indoor workers for the leakage of airborne radioactive material from handling areas. Sensitivity of model results to changes in various input parameters was investigated via illustrative example calculations. Indoor worker dose estimates were strongly dependent on the duration of worker exposure and the handling-area leakage flow rate. In contrast, doses were not very sensitive to handling-area exhaust ventilation flow rates. For the presented example, inhalation was the dominant radiological dose pathway. The two companion papers demonstrate independent analysis capabilities of the regulator for performing confirmatory calculations of frequency and consequence, which assist the assessment of worker

Tax Compliance Inventory: TAX-I Voluntary tax compliance, enforced tax compliance, tax avoidance, and tax evasion

Science.gov (United States)

Kirchler, Erich; Wahl, Ingrid

2010-01-01

Surveys on tax compliance and non-compliance often rely on ad hoc formulated items which lack standardization and empirical validation. We present an inventory to assess tax compliance and distinguish between different forms of compliance and non-compliance: voluntary versus enforced compliance, tax avoidance, and tax evasion. First, items to measure voluntary and enforced compliance, avoidance, and evasion were drawn up (collected from past research and newly developed), and tested empirically with the aim of producing four validated scales with a clear factorial structure. Second, findings from the first analyses were replicated and extended to validation on the basis of motivational postures. A standardized inventory is provided which can be used in surveys in order to collect data which are comparable across research focusing on self-reports. The inventory can be used in either of two ways: either in its entirety, or by applying the single scales independently, allowing an economical and fast assessment of different facets of tax compliance. PMID:20502612

Tax Compliance Inventory: TAX-I Voluntary tax compliance, enforced tax compliance, tax avoidance, and tax evasion.

Science.gov (United States)

Kirchler, Erich; Wahl, Ingrid

2010-06-01

Surveys on tax compliance and non-compliance often rely on ad hoc formulated items which lack standardization and empirical validation. We present an inventory to assess tax compliance and distinguish between different forms of compliance and non-compliance: voluntary versus enforced compliance, tax avoidance, and tax evasion. First, items to measure voluntary and enforced compliance, avoidance, and evasion were drawn up (collected from past research and newly developed), and tested empirically with the aim of producing four validated scales with a clear factorial structure. Second, findings from the first analyses were replicated and extended to validation on the basis of motivational postures. A standardized inventory is provided which can be used in surveys in order to collect data which are comparable across research focusing on self-reports. The inventory can be used in either of two ways: either in its entirety, or by applying the single scales independently, allowing an economical and fast assessment of different facets of tax compliance.

Influence of Housing Wall Compliance on Shock Absorbers in the Context of Vehicle Dynamics

Science.gov (United States)

Pulvirenti, G.; Faria, C.

2017-10-01

Shock absorbers play a key role in vehicle dynamics. Researchers have spent significant effort in order to understand phenomena associated with this component, but there are still several issues to address, in part because new technology development and design trends continually lead to new challenges, among which weight reduction is crucial. For shock absorbers, weight reduction is related to the use of new materials (e.g. composite) or new design paradigms (e.g. more complex geometry, wall thickness, etc.). All of them are directly linked to wall compliance values higher than the actual ones. The present article proposes a first analysis of the phenomena introduced by a high wall compliance, through a modelling approach and various simulations in order to understand the vehicle behaviour changes. It is shown that high values of wall compliance lead to increased hysteresis in the force-velocity curve. However, comfort, handling and ride performances are not significantly affected by this designing parameter.

Personal and social factors regarding medical non-compliance in cardiac failure patients

International Nuclear Information System (INIS)

Mujtaba, S.F.; Masood, T.; Khalid, D.

2011-01-01

Objective: To determine the frequency and association of various personal and social factors with medical non-compliance in cardiac failure patients. Study Design: Cross-sectional, observational study. Place and Duration of Study: National Institute of Cardiovascular Diseases (NICVD), Karachi from January to August 2010. Methodology: Patients admitted in the medical wards of NICVD, who were being treated for cardiac failure, were included. Information regarding basic demographics, education level, self engagement in therapy and status of compliance was obtained by questionnaire. Statistical analysis was carried out by using Fisher's exact test and chi-square. Level of significance was < 0.05. Data was analyzed using SPSS V-15. Out of 267 patients, 73 (27.3%) were compliant while 194 (72.7%) were non-compliant. Educated, self caring patient, and those who knew names of their medications were more compliant than the rest. Conclusion: Medical non-compliance is very common in heart failure patients. Illiteracy and no self engagement in therapy are associated with non-compliance. (author)

Potential Indoor Worker Exposure From Handling Area Leakage: Example Event Sequence Frequency Analysis

International Nuclear Information System (INIS)

Benke, Roland R.; Adams, George R.

2008-01-01

The U.S. Department of Energy (DOE) is currently considering design options for the facilities that will handle spent nuclear fuel and high-level radioactive waste at the potential nuclear waste repository at Yucca Mountain, Nevada. The license application must demonstrate compliance with the performance objectives of 10 CFR Part 63, which include occupational dose limits from 10 CFR Part 20. If DOE submits a license application under 10 CFR Part 63, the U.S. Nuclear Regulatory Commission (NRC) will conduct a risk-informed, performance-based review of the DOE license application and its preclosure safety analysis, in which in-depth technical evaluations are focused on technical areas that are significant to preclosure safety and risk. As part of pre-licensing activities, the Center for Nuclear Waste Regulatory Analyses (CNWRA) developed the Preclosure Safety Analysis Tool software to aid in the regulatory review of a DOE license application and support any independent confirmatory assessments that may be needed. Recent DOE information indicates a primarily canister-based handling approach that includes the wet transfer of individual assemblies where Heating, Ventilation, and Air Conditioning (HVAC) systems may be relied on to provide confinement and limit the spread of any airborne radioactive material from handling operations. Workers may be involved in manual and remote operations in handling transportation casks, canisters, waste packages, or bare spent nuclear fuel assemblies inside facility buildings. As part of routine operations within these facilities, radioactive material may potentially become airborne if canisters are opened or bare fuel assemblies are handled. Leakage of contaminated air from the handling area into adjacent occupied areas, therefore, represents a potential radiological exposure pathway for indoor workers. The objective of this paper is to demonstrate modeling capabilities that can be used by the regulator to estimate frequencies of

Finding error handling bugs in OpenSSL using Coccinelle

DEFF Research Database (Denmark)

Lawall, Julia; Laurie, Ben; Hansen, René Rydhof

2010-01-01

OpenSSL is a library providing various functionalities relating to secure network communication.  Detecting and fixing bugs in OpenSSL code is thus essential, particularly when such bugs can lead to malicious attacks.  In previous work, we have proposed a methodology for finding API usage protocols...... in Linux kernel code using the program matching and transformation engine Coccinelle.  In this work, we report on our experience in applying this methodology to OpenSSL, focusing on API usage protocols related to error handling.  We have detected over 30 bugs in a recent OpenSSL snapshot, and in many cases...... it was possible to correct the bugs automatically.  Our patches correcting these bugs have been accepted by the OpenSSL developers.  This work furthermore confirms the applicability of our methodology to user-level code....

Fuel handling machine and auxiliary systems for a fuel handling cell

International Nuclear Information System (INIS)

Suikki, M.

2013-10-01

This working report is an update for as well as a supplement to an earlier fuel handling machine design (Kukkola and Roennqvist 2006). A focus in the earlier design proposal was primarily on the selection of a mechanical structure and operating principle for the fuel handling machine. This report introduces not only a fuel handling machine design but also auxiliary fuel handling cell equipment and its operation. An objective of the design work was to verify the operating principles of and space allocations for fuel handling cell equipment. The fuel handling machine is a remote controlled apparatus capable of handling intensely radiating fuel assemblies in the fuel handling cell of an encapsulation plant. The fuel handling cell is air tight space radiation-shielded with massive concrete walls. The fuel handling machine is based on a bridge crane capable of traveling in the handling cell along wall tracks. The bridge crane has its carriage provided with a carousel type turntable having mounted thereon both fixed and telescopic masts. The fixed mast has a gripper movable on linear guides for the transfer of fuel assemblies. The telescopic mast has a manipulator arm capable of maneuvering equipment present in the fuel handling cell, as well as conducting necessary maintenance and cleaning operations or rectifying possible fault conditions. The auxiliary fuel handling cell systems consist of several subsystems. The subsystems include a service manipulator, a tool carrier for manipulators, a material hatch, assisting winches, a vacuum cleaner, as well as a hose reel. With the exception of the vacuum cleaner, the devices included in the fuel handling cell's auxiliary system are only used when the actual encapsulation process is not ongoing. The malfunctions of mechanisms or actuators responsible for the motion actions of a fuel handling machine preclude in a worst case scenario the bringing of the fuel handling cell and related systems to a condition appropriate for

Fuel handling machine and auxiliary systems for a fuel handling cell

Energy Technology Data Exchange (ETDEWEB)

Suikki, M. [Optimik Oy, Turku (Finland)

2013-10-15

This working report is an update for as well as a supplement to an earlier fuel handling machine design (Kukkola and Roennqvist 2006). A focus in the earlier design proposal was primarily on the selection of a mechanical structure and operating principle for the fuel handling machine. This report introduces not only a fuel handling machine design but also auxiliary fuel handling cell equipment and its operation. An objective of the design work was to verify the operating principles of and space allocations for fuel handling cell equipment. The fuel handling machine is a remote controlled apparatus capable of handling intensely radiating fuel assemblies in the fuel handling cell of an encapsulation plant. The fuel handling cell is air tight space radiation-shielded with massive concrete walls. The fuel handling machine is based on a bridge crane capable of traveling in the handling cell along wall tracks. The bridge crane has its carriage provided with a carousel type turntable having mounted thereon both fixed and telescopic masts. The fixed mast has a gripper movable on linear guides for the transfer of fuel assemblies. The telescopic mast has a manipulator arm capable of maneuvering equipment present in the fuel handling cell, as well as conducting necessary maintenance and cleaning operations or rectifying possible fault conditions. The auxiliary fuel handling cell systems consist of several subsystems. The subsystems include a service manipulator, a tool carrier for manipulators, a material hatch, assisting winches, a vacuum cleaner, as well as a hose reel. With the exception of the vacuum cleaner, the devices included in the fuel handling cell's auxiliary system are only used when the actual encapsulation process is not ongoing. The malfunctions of mechanisms or actuators responsible for the motion actions of a fuel handling machine preclude in a worst case scenario the bringing of the fuel handling cell and related systems to a condition appropriate for

Certification Plan, low-level waste Hazardous Waste Handling Facility

International Nuclear Information System (INIS)

Albert, R.

1992-01-01

The purpose of this plan is to describe the organization and methodology for the certification of low-level radioactive waste (LLW) handled in the Hazardous Waste Handling Facility (HWHF) at Lawrence Berkeley Laboratory (LBL). This plan also incorporates the applicable elements of waste reduction, which include both up-front minimization and end-product treatment to reduce the volume and toxicity of the waste; segregation of the waste as it applies to certification; an executive summary of the Waste Management Quality Assurance Implementing Management Plan (QAIMP) for the HWHF and a list of the current and planned implementing procedures used in waste certification. This plan provides guidance from the HWHF to waste generators, waste handlers, and the Waste Certification Specialist to enable them to conduct their activities and carry out their responsibilities in a manner that complies with the requirements of WHC-WAC. Waste generators have the primary responsibility for the proper characterization of LLW. The Waste Certification Specialist verifies and certifies that LBL LLW is characterized, handled, and shipped in accordance with the requirements of WHC-WAC. Certification is the governing process in which LBL personnel conduct their waste generating and waste handling activities in such a manner that the Waste Certification Specialist can verify that the requirements of WHC-WAC are met

Handling chemotherapy drugs-Do medical gloves really protect?

Science.gov (United States)

Landeck, Lilla; Gonzalez, Ernesto; Koch, Olaf Manfred

2015-10-15

Due to their potential mutagenic, carcinogenic and teratogenic effects occupational exposure to chemotherapy drugs should be kept to a minimum. Utilization of personnel protective devices, especially the use of protective medical gloves, is a mainstay to avoid skin contact. The choice of appropriate gloves is of outstanding importance. For optimal protection in the oncology setting it is essential to establish general guidelines evaluating appropriate materials and defining quality standards. Establishing these guidelines can facilitate better handling and avoid potential hazards and late sequelae. In Europe there are no specific requirements or test methodologies for medical gloves used in the oncology environment. The implementation of uniform standards for gloves used while handling chemotherapy drugs would be desirable. In contrast, in the US medical gloves used to handle chemotherapy drugs have to fulfill requirements according to the ASTM International (American Society of Testing and Materials) standard D 6978-05. Nitrile or natural rubber latex is a preferred basic glove material, while vinyl is considered inappropriate because of its generally increased permeability. For extended exposure to chemotherapy drugs, double gloving, the use of thicker gloves and the frequent change of gloves increases their protective power. © 2014 UICC.

Application of remote handling compatibility on ITER plant

International Nuclear Information System (INIS)

Sanders, S.; Rolfe, A.; Mills, S.F.; Tesini, A.

2011-01-01

The ITER plant will require fully remote maintenance during its operational life. For this to be effective, safe and efficient the plant will have to be developed in accordance with remote handling (RH) compatibility requirements. A system for ensuring RH compatibility on plant designed for Tokamaks was successfully developed and applied, inter alia, by the authors when working at the JET project. The experience gained in assuring RH compatibility of plant at JET is now being applied to RH relevant ITER plant. The methodologies required to ensure RH compatibility of plant include the standardization of common plant items, standardization of RH features, availability of common guidance on RH best practice and a protocol for design and interface review and approval. The protocol in use at ITER is covered by the ITER Remote Maintenance Management System (IRMMS) defines the processes and utilization of management controls including Plant Definition Forms (PDF), Task Definition Forms (TDFs) and RH Compatibility Assessment Forms (RHCA) and the ITER RH Code of Practice. This paper will describe specific examples where the authors have applied the methodology proven at JET to ensure remote handling compatibility on ITER plant. Examples studied are: ·ELM coils (to be installed in-vessel behind the Blanket Modules) - handling both in-vessel, in Casks and at the Hot Cell as well as fully remote installation and connection (mechanical and electrical) in-vessel. ·Neutral beam systems (in-vessel and in the NB Cell) - beam sources, cesium oven, beam line components (accessed in the NB Cell) and Duct Liner (remotely replaced from in-vessel). ·Divertor (in-vessel) - cooling pipe work and remotely operated electrical connector. The RH compatibility process can significantly affect plant design. This paper should therefore be of interest to all parties who develop ITER plant designs.

78 FR 47677 - DOE Activities and Methodology for Assessing Compliance With Building Energy Codes

Science.gov (United States)

2013-08-06

... methodology report, however, for convenience the key points of the methodology are listed below with the... fundamentally different sampling plans and research methodologies? Are there ways to encourage owners and...

How does co-product handling affect the carbon footprint of milk? Case study of milk production in New Zealand and Sweden

DEFF Research Database (Denmark)

Flysjö, Anna Maria; Cederberg, Christel; Henriksson, Maria

2011-01-01

Purpose This paper investigates different methodologies of handling co-products in life cycle assessment (LCA) or carbon footprint (CF) studies. Co-product handling can have a significant effect on final LCA/CF results, and although there are guidelines on the preferred order for different methods...... (when slaughtered), calves, manure, hides, etc., the environmental burden (here GHG emissions) must be distributed between these outputs (in the present study no emissions are attributed to hides specifically, or to manure which is recycled on-farm). Different methodologically approaches, (1) system...

Development of a handling technology for underwater inspection and dismantling

International Nuclear Information System (INIS)

Rose, N.

1994-01-01

For the purpose of underwater inspection and dismantling of nuclear facilities, a prototype of a freely submersible, remote-controlled handling system was developed and tested under laboratory conditions. Particular interest was taken in the specific boundary conditions of the area of application and the methodological concept. The system was developed in three phases; in each phase, a prototype was constructed and tested. (orig.) [de

The EUR assessment process, methodology and highlights of the compliance analysis for the EU-APWR standard design - 15235

International Nuclear Information System (INIS)

Facciolo, L.; Welander, D.; Nuutinen, P.

2015-01-01

In August 2007 the European Utility Requirements organisation (EUR) received an initial application from Mitsubishi Heavy Industries asking for submitting the EU-APWR standard design to the EUR assessment. The EU-APWR is an advanced PWR, 1700 MWe class, 4-loops, 14 ft active core fuel length. The EU-APWR Standard Design documentation has been assessed against the EUR Volume 2 - Generic Nuclear Island requirements - Revision D. The assessment is divided into 20 chapters for a total of over 4000 individual requirements. A Synthesis Report for each chapter was written by the assessment performers. The Synthesis Reports showed that the EU-APWR Standard Design was in compliance with 77% of the EUR requirements. The percentage increases to 85% when taking into account the requirements where the design has been considered in compliance with the objectives. The requirements resulting in a non-compliance assessment correspond to less than 2%. This confirms the overall good level of compliance. From the Utilities point of view it is possible to state that the differences in standards, codes and regulations applied in Japan and in Europe contribute to a series of discrepancies between the EU-APWR Standard Design and the EUR, regarding, for instance, outage durations, operational capability, layout, personal protection or radiation monitoring. Some disagreements are easy to overcome, others require particular attention

Analysis of ITER upper port plug remote handling maintenance scenarios

International Nuclear Information System (INIS)

Koning, J.F.; Baar, M.R. de; Elzendoorn, B.S.Q.; Heemskerk, C.J.M.; Ronden, D.M.S.; Schuth, W.J.

2012-01-01

Highlights: ► Remote Handling Study Centre: providing RH compatibility analysis. ► Simulation: virtual reality including kinematics and realtime physics simulator. ► Applied on analysis of RH compatibility of Upper Launcher component replacement. ► Resulting in lowered maintenance procedure time and lessons learned. - Abstract: The ITER tokamak has a modular design, with port plugs, blanket modules and divertor cassettes. This set-up allows for maintenance of diagnostics, heating systems and first wall elements. The maintenance can be done in situ, or in the Hot Cell. Safe and effective remote handling (RH) will be ensured by the RH requirements and standards. Compliance is verified through remote handling compatibility assessments at the ITER Design Review milestones. The Remote Handling Study Centre at FOM Institute DIFFER is created to study ITER RH maintenance processes at different levels of complexity, from relatively simple situational awareness checks using snap-shots in the CAD system, time studies using virtual reality (VR) animations, to extensive operational sequence validation with multiple operators in real-time. The multi-operator facility mimics an RH work-cell as presently foreseen in the ITER RH control room. Novel VR technology is used to create a realistic setting in which a team of RH operators can interact with virtual ITER environments. A physics engine is used to emulate real-time contact interaction as to provide realistic haptic feed-back. Complex interactions between the RH operators and the control room system software are tested. RH task performance is quantified and operational resource usage estimated. The article provides a description and lessons learned from a recent study on replacement of the Steering Mirror Assembly on the ECRH (Electron Cyclotron Resonance Heating) Upper Launcher port plug.

Analysis of ITER upper port plug remote handling maintenance scenarios

Energy Technology Data Exchange (ETDEWEB)

Koning, J.F., E-mail: j.f.koning@heemskerk-innovative.nl [FOM Institute DIFFER - Dutch Institute for Fundamental Energy Research, Association EURATOM-FOM, Partner in the Trilateral Euregio Cluster and ITER-NL, PO Box 1207, 3430 BE Nieuwegein (Netherlands); Baar, M.R. de; Elzendoorn, B.S.Q. [FOM Institute DIFFER - Dutch Institute for Fundamental Energy Research, Association EURATOM-FOM, Partner in the Trilateral Euregio Cluster and ITER-NL, PO Box 1207, 3430 BE Nieuwegein (Netherlands); Heemskerk, C.J.M. [Heemskerk Innovative Technology, Noordwijk (Netherlands); Ronden, D.M.S.; Schuth, W.J. [FOM Institute DIFFER - Dutch Institute for Fundamental Energy Research, Association EURATOM-FOM, Partner in the Trilateral Euregio Cluster and ITER-NL, PO Box 1207, 3430 BE Nieuwegein (Netherlands)

2012-08-15

Highlights: Black-Right-Pointing-Pointer Remote Handling Study Centre: providing RH compatibility analysis. Black-Right-Pointing-Pointer Simulation: virtual reality including kinematics and realtime physics simulator. Black-Right-Pointing-Pointer Applied on analysis of RH compatibility of Upper Launcher component replacement. Black-Right-Pointing-Pointer Resulting in lowered maintenance procedure time and lessons learned. - Abstract: The ITER tokamak has a modular design, with port plugs, blanket modules and divertor cassettes. This set-up allows for maintenance of diagnostics, heating systems and first wall elements. The maintenance can be done in situ, or in the Hot Cell. Safe and effective remote handling (RH) will be ensured by the RH requirements and standards. Compliance is verified through remote handling compatibility assessments at the ITER Design Review milestones. The Remote Handling Study Centre at FOM Institute DIFFER is created to study ITER RH maintenance processes at different levels of complexity, from relatively simple situational awareness checks using snap-shots in the CAD system, time studies using virtual reality (VR) animations, to extensive operational sequence validation with multiple operators in real-time. The multi-operator facility mimics an RH work-cell as presently foreseen in the ITER RH control room. Novel VR technology is used to create a realistic setting in which a team of RH operators can interact with virtual ITER environments. A physics engine is used to emulate real-time contact interaction as to provide realistic haptic feed-back. Complex interactions between the RH operators and the control room system software are tested. RH task performance is quantified and operational resource usage estimated. The article provides a description and lessons learned from a recent study on replacement of the Steering Mirror Assembly on the ECRH (Electron Cyclotron Resonance Heating) Upper Launcher port plug.

IRSN methodological guide to conducting workplace studies in compliance with French regulations

International Nuclear Information System (INIS)

Donadille, L.; Rehel, J. L.; Deligne, J. M.; Queinnec, F.; Aubert, B.; Bottollier-Depois, J. F.; Clairand, I.; Jourdain, J. R.; Rannou, A.

2007-01-01

Under French regulations governing radiation protection of workers, dosimetric workplace studies are mandatory. However, their practical implementation is not described. IRSN has developed a guide to help stakeholders in the radiological protection of workers conduct such studies. It proposes a general methodology applicable to most cases and 'workplace sheets', which apply this methodology to specific occupational settings. At present, two sheets are available: Conventional radiology and interventional radiology. (authors)

Vascular compliance limits during sleep deprivation and recovery sleep.

Science.gov (United States)

Phillips, Derrick J; Schei, Jennifer L; Rector, David M

2013-10-01

Our previous studies showed that evoked hemodynamic responses are smaller during wake compared to sleep; suggesting neural activity is associated with vascular expansion and decreased compliance. We explored whether prolonged activity during sleep deprivation may exacerbate vascular expansion and blunt hemodynamic responses. Evoked auditory responses were generated with periodic 65 dB speaker clicks over a 72-h period and measured with cortical electrodes. Evoked hemodynamic responses were measured simultaneously with optical techniques using three light-emitting diodes, and a photodiode. Animals were housed in separate 30×30×80 cm enclosures, tethered to a commutator system and maintained on a 12-h light/dark cycle. Food and water were available ad libitum. Seven adult female Sprague-Dawley rats. Following a 24-h baseline recording, sleep deprivation was initiated for 0 to 10 h by gentle handling, followed by a 24-h recovery sleep recording. Evoked electrical and hemodynamic responses were measured before, during, and after sleep deprivation. Following deprivation, evoked hemodynamic amplitudes were blunted. Steady-state oxyhemoglobin concentration increased during deprivation and remained high during the initial recovery period before returning to baseline levels after approximately 9-h. Sleep deprivation resulted in blood vessel expansion and decreased compliance while lower basal neural activity during recovery sleep may allow blood vessel compliance to recover. Chronic sleep restriction or sleep deprivation could push the vasculature to critical levels, limiting blood delivery, and leading to metabolic deficits with the potential for neural trauma.

Comparative study on software development methodologies

Directory of Open Access Journals (Sweden)

Mihai Liviu DESPA

2014-12-01

Full Text Available This paper focuses on the current state of knowledge in the field of software development methodologies. It aims to set the stage for the formalization of a software development methodology dedicated to innovation orientated IT projects. The paper starts by depicting specific characteristics in software development project management. Managing software development projects involves techniques and skills that are proprietary to the IT industry. Also the software development project manager handles challenges and risks that are predominantly encountered in business and research areas that involve state of the art technology. Conventional software development stages are defined and briefly described. Development stages are the building blocks of any software development methodology so it is important to properly research this aspect. Current software development methodologies are presented. Development stages are defined for every showcased methodology. For each methodology a graphic representation is illustrated in order to better individualize its structure. Software development methodologies are compared by highlighting strengths and weaknesses from the stakeholder's point of view. Conclusions are formulated and a research direction aimed at formalizing a software development methodology dedicated to innovation orientated IT projects is enunciated.

The Amsterdam Hip Protector Study: Compliance and determinants of compliance

NARCIS (Netherlands)

van Schoor, N.M.; Asma, G.; Smit, J.H.; Bouter, L.M.; Lips, P.T.A.M.

2003-01-01

Hip protectors appear to be effective in reducing the incidence of hip fractures. However, compliance is often poor. Therefore, the objective of this study was to examine the compliance and determinants of compliance with external hip protectors. A prospective study was performed in residents from

Compliance with public dose limits

International Nuclear Information System (INIS)

Mason, G.C.

1991-01-01

Radiation, in various forms, is ubiquitous in the environment. Natural background radiation leads to an average radiation exposure for the general population of about 2 mSv per year. The mining and milling of radioactive ores - uranium and mineral sands - may cause a small increase in radiation exposure for some members of the public. Because any such increment in exposure is small compared with a natural exposure that is variable and difficult to quantify accurately, it is not easy to determine what proportion of the total dose received by a member of the public can be attributed to mining and milling activities. Consequently, because public dose limits apply and to those doses caused by human activity, such as mining and milling, the task of demonstrating compliance can be hampered by uncertainty. Some strategies for handling this situation are discussed. While the discussion concentrates on public dose limits, much of it may also be applicable, or adaptable, to occupational exposure. 4 refs., 2 figs

A Generic Methodology for Superstructure Optimization of Different Processing Networks

DEFF Research Database (Denmark)

Bertran, Maria-Ona; Frauzem, Rebecca; Zhang, Lei

2016-01-01

In this paper, we propose a generic computer-aided methodology for synthesis of different processing networks using superstructure optimization. The methodology can handle different network optimization problems of various application fields. It integrates databases with a common data architecture......, a generic model to represent the processing steps, and appropriate optimization tools. A special software interface has been created to automate the steps in the methodology workflow, allow the transfer of data between tools and obtain the mathematical representation of the problem as required...

Mapping Tax Compliance

DEFF Research Database (Denmark)

Boll, Karen

2014-01-01

Tax compliance denotes the act of reporting and paying taxes in accordance with the tax laws. Current social science scholarship on tax compliance can almost entirely be divided into behavioural psychology analyses and critical tax studies. This article, which presents two cases of how tax...... compliance is constructed, challenges the explanatory reaches of today's social science approaches, arguing that an alternative approach to understanding tax compliance is worthwhile exploring. This other choice of approach, inspired by actor–network theory (ANT), adopts a more practice-oriented focus...... that studies tax compliance where it takes place as well as what it is made of. Consequently, this article argues that tax compliance is a socio-material assemblage and that complying is a distributed action. The article concludes by highlighting how an ANT approach contributes to the further theoretical...

Remote-Handled Transuranic Waste Content Codes (RH-Trucon)

International Nuclear Information System (INIS)

2006-01-01

The Remote-Handled Transuranic (RH-TRU) Content Codes (RH-TRUCON) document describes the inventory of RH-TRU waste within the transportation parameters specified by the Remote-Handled Transuranic Waste Authorized Methods for Payload Control (RH-TRAMPAC). The RH-TRAMPAC defines the allowable payload for the RH-TRU 72-B. This document is a catalog of RH-TRU 72-B authorized contents by site. A content code is defined by the following components: (1) A two-letter site abbreviation that designates the physical location of the generated/stored waste (e.g., ID for Idaho National Laboratory [INL]). The site-specific letter designations for each of the sites are provided in Table 1. (2) A three-digit code that designates the physical and chemical form of the waste (e.g., content code 317 denotes TRU Metal Waste). For RH-TRU waste to be transported in the RH-TRU 72-B, the first number of this three-digit code is ''3''. The second and third numbers of the three-digit code describe the physical and chemical form of the waste. Table 2 provides a brief description of each generic code. Content codes are further defined as subcodes by an alpha trailer after the three-digit code to allow segregation of wastes that differ in one or more parameter(s). For example, the alpha trailers of the subcodes ID 322A and ID 322B may be used to differentiate between waste packaging configurations. As detailed in the RH-TRAMPAC, compliance with flammable gas limits may be demonstrated through the evaluation of compliance with either a decay heat limit or flammable gas generation rate (FGGR) limit per container specified in approved content codes. As applicable, if a container meets the watt*year criteria specified by the RH-TRAMPAC, the decay heat limits based on the dose-dependent G value may be used as specified in an approved content code. If a site implements the administrative controls outlined in the RH-TRAMPAC and Appendix 2.4 of the RH-TRU Payload Appendices, the decay heat or FGGR

Dynamic PMU Compliance Test under C37.118.1aTM-2014

DEFF Research Database (Denmark)

Ghiga, Radu; Wu, Qiuwei; Martin, K.

2015-01-01

This paper presents a flexible testing methodology and the dynamic compliance of PMUs as per the new C37.118.1a amendment published in 2014. The test platform consists of test signal generator, a Doble F6150 amplifier, PMUs under test, and a PMU test result analysis kit. The Doble amplifier is used...

Handling of multiassembly sealed baskets between reactor storage and a remote handling facility

International Nuclear Information System (INIS)

Massey, J.V.; Kessler, J.H.; McSherry, A.J.

1989-06-01

The storage of multiple fuel assemblies in sealed (welded) dry storage baskets is gaining increasing use to augment at-reactor fuel storage capacity. Since this increasing use will place a significant number of such baskets on reactor sites, some initial downstream planning for their future handling scenarios for retrieving multi-assembly sealed baskets (MSBs) from onsite storage and transferring and shipping the fuel (and/or the baskets) to a federally operated remote handling facility (RHF). Numerous options or at-reactor and away-from-reactor handling were investigated. Materials handling flowsheets were developed along with conceptual designs for the equipment and tools required to handle and open the MSBs. The handling options were evaluated and compared to a reference case, fuel handling sequence (i.e., fuel assemblies are taken from the fuel pool, shipped to a receiving and handling facility and placed into interim storage). The main parameters analyzed are throughout, radiation dose burden and cost. In addition to evaluating the handling of MSBs, this work also evaluated handling consolidated fuel canisters (CFCs). In summary, the handling of MSBs and CFCs in the store, ship and bury fuel cycle was found to be feasible and, under some conditions, to offer significant benefits in terms of throughput, cost and safety. 14 refs., 20 figs., 24 tabs

Environmental Compliance Mechanisms

NARCIS (Netherlands)

Merkouris, Panagiotis; Fitzmaurice, Malgosia

2017-01-01

Compliance mechanisms can be found in treaties regulating such diverse issues as human rights, disarmament law, and environmental law. In this bibliography, the focus will be on compliance mechanisms of multilateral environmental agreements (MEAs). Compliance with norms of international

PENINGKATAN KINERJA OHMS (ORDER HANDLING MANUFACTURING SYSTEM MELALUI SOFT SYSTEMS METHODOLOGY (SSM

Directory of Open Access Journals (Sweden)

Slamet Budiarto

2015-12-01

Full Text Available Dalam penelitian ini, untuk meningkatkan kinerja OHMS yang karakteristiknya lebih kompleks, digunakan soft systems methodology yang banyak membantu para manajer untuk menyelesaikan masalah yang bervariasi dan kompleks. Permasalahan tersebut sering menemui kegagalan dalam penyelesaiannya ketika pendekatan system engineering (SE digunakan. Penelitian menunjukan gambaran aktivitas lebih jelas, dan penentuan indikator lebih terstruktur dengan mengkombinasikan IDEF0. Melalui soft systems methodology yang dikuantitatifkan pada langkah debating menunjukan aktivitas A4, yaitu membuat produk, paling penting dengan bobot 35,32%. Dari hasil dekomposisi aktivitas kritis meliputi A12: merencanakan program produksi dengan bobot 9,17%, A41: mengendalikan produksi dengan bobot 9,17%, A32: mendapatkan kapasitas produksi, dengan bobot 8,72% dan A45: mengetes rakitan akhir dengan bobot 8,72%. Selanjutnya kinerja yang perlu dicermati pada ICOM’s (Input, Control, Output, Mechanism, lebih banyak pada input aktivitas kritis.

PENINGKATAN KINERJA OHMS (ORDER HANDLING MANUFACTURING SYSTEM MELALUI SOFT SYSTEMS METHODOLOGY (SSM

Directory of Open Access Journals (Sweden)

Slamet Budiarto

2011-12-01

Full Text Available Dalam penelitian ini, untuk meningkatkan kinerja OHMS yang karakteristiknya lebih kompleks, digunakan soft systems methodology yang banyak membantu para manajer untuk menyelesaikan masalah yang bervariasi dan kompleks. Permasalahan tersebut sering menemui kegagalan dalam penyelesaiannya ketika pendekatan system engineering (SE digunakan. Penelitian menunjukan gambaran aktivitas lebih jelas, dan penentuan indikator lebih terstruktur dengan mengkombinasikan IDEF0. Melalui soft systems methodology yang dikuantitatifkan pada langkah debating menunjukan aktivitas A4, yaitu membuat produk, paling penting dengan bobot 35,32%. Dari hasil dekomposisi aktivitas kritis meliputi A12: merencanakan program produksi dengan bobot 9,17%, A41: mengendalikan produksi dengan bobot 9,17%, A32: mendapatkan kapasitas produksi, dengan bobot 8,72% dan A45: mengetes rakitan akhir dengan bobot 8,72%. Selanjutnya kinerja yang perlu dicermati pada ICOM’s (Input, Control, Output, Mechanism, lebih banyak pada input aktivitas kritis.

Nuclear fuel handling apparatus

International Nuclear Information System (INIS)

Andrea, C.; Dupen, C.F.G.; Noyes, R.C.

1977-01-01

A fuel handling machine for a liquid metal cooled nuclear reactor in which a retractable handling tube and gripper are lowered into the reactor to withdraw a spent fuel assembly into the handling tube. The handling tube containing the fuel assembly immersed in liquid sodium is then withdrawn completely from the reactor into the outer barrel of the handling machine. The machine is then used to transport the spent fuel assembly directly to a remotely located decay tank. The fuel handling machine includes a decay heat removal system which continuously removes heat from the interior of the handling tube and which is capable of operating at its full cooling capacity at all times. The handling tube is supported in the machine from an articulated joint which enables it to readily align itself with the correct position in the core. An emergency sodium supply is carried directly by the machine to provide make up in the event of a loss of sodium from the handling tube during transport to the decay tank. 5 claims, 32 drawing figures

Mixed waste certification plan for the Lawrence Berkeley Laboratory Hazardous Waste Handling Facility. Revision 1

International Nuclear Information System (INIS)

1995-01-01

The purpose of this plan is to describe the organization and methodology for the certification of mixed waste handled in the Hazardous Waste Handling Facility (HWHF) at Lawrence Berkeley Laboratory (LBL). This plan is composed to meet the requirements found in the Westinghouse Hanford Company (WHC) Solid Waste Acceptance Criteria (WAC) and follows the suggested outline provided by WHC in the letter of April 26, 1990, to Dr. R.H. Thomas, Occupational Health Division, LBL. Mixed waste is to be transferred to the WHC Hanford Site Central Waste Complex and Burial Grounds in Hanford, Washington

NDMA guidelines on handling of nuclear and radiological emergencies

Energy Technology Data Exchange (ETDEWEB)

Abani, M C [National Disaster Management Authority, New Delhi (India)

2010-07-01

The vulnerability to the disasters is high in India due to the large population density, fast growing urbanization, industrialization and also because of poor economic conditions of people. Natural disasters have been recurring phenomena in India, leading to extensive loss of life, livelihood and property. The primary reason for such heavy losses can be attributed to the reactive and response-centric approach adopted in the past in handling of the disasters. Based on the Guidelines a holistic approach is to be adopted for Nuclear Emergency Management Framework that assigns the highest priority to prevention, mitigation and compliance to regulatory requirements, while strengthening preparedness, capacity development, response etc. It will be implemented through strengthening of the existing action plans or by preparing new action plans at national, state and district levels by the stakeholders at all levels of administration

NDMA guidelines on handling of nuclear and radiological emergencies

International Nuclear Information System (INIS)

Abani, M.C.

2010-01-01

The vulnerability to the disasters is high in India due to the large population density, fast growing urbanization, industrialization and also because of poor economic conditions of people. Natural disasters have been recurring phenomena in India, leading to extensive loss of life, livelihood and property. The primary reason for such heavy losses can be attributed to the reactive and response-centric approach adopted in the past in handling of the disasters. Based on the Guidelines a holistic approach is to be adopted for Nuclear Emergency Management Framework that assigns the highest priority to prevention, mitigation and compliance to regulatory requirements, while strengthening preparedness, capacity development, response etc. It will be implemented through strengthening of the existing action plans or by preparing new action plans at national, state and district levels by the stakeholders at all levels of administration

ENHANCING VOLUNTARY COMPLIANCE BY REDUCING COMPLIANCE COSTS: A TAXPAYER SERVICE APPROACH

OpenAIRE

Glenn Jenkins; EDWIN FORLEMU

1993-01-01

In this paper an overview is made of the determinants of voluntary tax compliance. Unlike previous treatments of this subject, the cost of taxpayer compliance is considered as an important determinant of overall level of voluntary compliance in a country. A number of ways that tax authorities reduce compliance are discussed, and the most common uses of information technology in providing taxpayer service is described. Finally, the paper considers some of the ways that such activities might be...

Architectures and methodologies for future deployment of multi-site Zettabyte-Exascale data handling platforms

CERN Document Server

Acín, V; Boccali, T; Cancio, G; Collier, I P; Corney, D; Delaunay, B; Delfino, M; dell'Agnello, L; Flix, J; Fuhrmann, P; Gasthuber, M; Gülzow, V; Heiss, A; Lamanna, G; Macchi, P E; Maggi, M; Matthews, B; Neissner, C; Nief, J Y; Porto, M C; Sansum, A; Schulz, M; Shiers, J

2015-01-01

Several scientific fields, including Astrophysics, Astroparticle Physics, Cosmology, Nuclear and Particle Physics, and Research with Photons, are estimating that by the 2020 decade they will require data handling systems with data volumes approaching the Zettabyte distributed amongst as many as 10(18) individually addressable data objects (Zettabyte-Exascale systems). It may be convenient or necessary to deploy such systems using multiple physical sites. This paper describes the findings of a working group composed of experts from several

Architectures and methodologies for future deployment of multi-site Zettabyte-Exascale data handling platforms

International Nuclear Information System (INIS)

Acín, V; Neissner, C; Bird, I; Cancio, G; Boccali, T; Dell'Agnello, L; Maggi, M; Collier, I P; Corney, D; Matthews, B; Delaunay, B; Lamanna, G; Macchi, P-E; Nief, J-Y; Delfino, M; Flix, J; Fuhrmann, P; Gasthuber, M; Gülzow, V; Heiss, A

2015-01-01

Several scientific fields, including Astrophysics, Astroparticle Physics, Cosmology, Nuclear and Particle Physics, and Research with Photons, are estimating that by the 2020 decade they will require data handling systems with data volumes approaching the Zettabyte distributed amongst as many as 10 18 individually addressable data objects (Zettabyte-Exascale systems). It may be convenient or necessary to deploy such systems using multiple physical sites. This paper describes the findings of a working group composed of experts from several (paper)

Architectures and methodologies for future deployment of multi-site Zettabyte-Exascale data handling platforms

Science.gov (United States)

Acín, V.; Bird, I.; Boccali, T.; Cancio, G.; Collier, I. P.; Corney, D.; Delaunay, B.; Delfino, M.; dell'Agnello, L.; Flix, J.; Fuhrmann, P.; Gasthuber, M.; Gülzow, V.; Heiss, A.; Lamanna, G.; Macchi, P.-E.; Maggi, M.; Matthews, B.; Neissner, C.; Nief, J.-Y.; Porto, M. C.; Sansum, A.; Schulz, M.; Shiers, J.

2015-12-01

Several scientific fields, including Astrophysics, Astroparticle Physics, Cosmology, Nuclear and Particle Physics, and Research with Photons, are estimating that by the 2020 decade they will require data handling systems with data volumes approaching the Zettabyte distributed amongst as many as 1018 individually addressable data objects (Zettabyte-Exascale systems). It may be convenient or necessary to deploy such systems using multiple physical sites. This paper describes the findings of a working group composed of experts from several

Methods for verifying compliance with low-level radioactive waste acceptance criteria

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-09-01

This report summarizes the methods that are currently employed and those that can be used to verify compliance with low-level radioactive waste (LLW) disposal facility waste acceptance criteria (WAC). This report presents the applicable regulations representing the Federal, State, and site-specific criteria for accepting LLW. Typical LLW generators are summarized, along with descriptions of their waste streams and final waste forms. General procedures and methods used by the LLW generators to verify compliance with the disposal facility WAC are presented. The report was written to provide an understanding of how a regulator could verify compliance with a LLW disposal facility`s WAC. A comprehensive study of the methodology used to verify waste generator compliance with the disposal facility WAC is presented in this report. The study involved compiling the relevant regulations to define the WAC, reviewing regulatory agency inspection programs, and summarizing waste verification technology and equipment. The results of the study indicate that waste generators conduct verification programs that include packaging, classification, characterization, and stabilization elements. The current LLW disposal facilities perform waste verification steps on incoming shipments. A model inspection and verification program, which includes an emphasis on the generator`s waste application documentation of their waste verification program, is recommended. The disposal facility verification procedures primarily involve the use of portable radiological survey instrumentation. The actual verification of generator compliance to the LLW disposal facility WAC is performed through a combination of incoming shipment checks and generator site audits.

Methods for verifying compliance with low-level radioactive waste acceptance criteria

International Nuclear Information System (INIS)

1993-09-01

This report summarizes the methods that are currently employed and those that can be used to verify compliance with low-level radioactive waste (LLW) disposal facility waste acceptance criteria (WAC). This report presents the applicable regulations representing the Federal, State, and site-specific criteria for accepting LLW. Typical LLW generators are summarized, along with descriptions of their waste streams and final waste forms. General procedures and methods used by the LLW generators to verify compliance with the disposal facility WAC are presented. The report was written to provide an understanding of how a regulator could verify compliance with a LLW disposal facility's WAC. A comprehensive study of the methodology used to verify waste generator compliance with the disposal facility WAC is presented in this report. The study involved compiling the relevant regulations to define the WAC, reviewing regulatory agency inspection programs, and summarizing waste verification technology and equipment. The results of the study indicate that waste generators conduct verification programs that include packaging, classification, characterization, and stabilization elements. The current LLW disposal facilities perform waste verification steps on incoming shipments. A model inspection and verification program, which includes an emphasis on the generator's waste application documentation of their waste verification program, is recommended. The disposal facility verification procedures primarily involve the use of portable radiological survey instrumentation. The actual verification of generator compliance to the LLW disposal facility WAC is performed through a combination of incoming shipment checks and generator site audits

Perspectives on compliance: non-compliance with environmental licenses in the Netherlands

NARCIS (Netherlands)

van Snellenberg, A.H.L.M.; van de Peppel, R.A.

2002-01-01

Compliance with environmental law is not self-evident. In many instances enforcement of environmental regulations is a necessary means for achieving compliance. Assuming that an enforcement strategy, in order to be effective, has to fit the type of non-compliance, we integrate six different

Customers' expectations of complaint handling by airline service: privilege status and reasonability of demands from a social learning perspective.

Science.gov (United States)

Chiou, Wen-Bin; Chang, Ming-Hsu; Yang, Chao-Chin

2009-04-01

In the airline industry, membership and cabin class are noticeable servicescape features of customers' privilege status. Customers may learn that higher privilege customers are more desired and endured by the airline. From the customers' point of view, those with higher privilege may expect their demands to be complied with when they complain. The present study employed hypothetical scenarios to investigate how the privilege status of passengers and reasonability of their demands influenced their expectations toward the compliance of airline personnel. Analysis showed that higher privilege customers were more likely to expect airline personnel to comply with their demands. Moreover, participants with medium or high levels of privilege status had greater expectations of compliance even when demands were unreasonable. In sum, customer expectations toward complaint handling reflected predictions based on social learning.

Handling and safety enhancement of race cars using active aerodynamic systems

Science.gov (United States)

Diba, Fereydoon; Barari, Ahmad; Esmailzadeh, Ebrahim

2014-09-01

A methodology is presented in this work that employs the active inverted wings to enhance the road holding by increasing the downward force on the tyres. In the proposed active system, the angles of attack of the vehicle's wings are adjusted by using a real-time controller to increase the road holding and hence improve the vehicle handling. The handling of the race car and safety of the driver are two important concerns in the design of race cars. The handling of a vehicle depends on the dynamic capabilities of the vehicle and also the pneumatic tyres' limitations. The vehicle side-slip angle, as a measure of the vehicle dynamic safety, should be narrowed into an acceptable range. This paper demonstrates that active inverted wings can provide noteworthy dynamic capabilities and enhance the safety features of race cars. Detailed analytical study and formulations of the race car nonlinear model with the airfoils are presented. Computer simulations are carried out to evaluate the performance of the proposed active aerodynamic system.

Criminal Compliance

Directory of Open Access Journals (Sweden)

Cristina Antonella Andretta

2015-10-01

The article discusses the concepts of both compliance and criminal compliance, its main components and structure as well as the main rules relating to its global application, and finally his emergence in the Ecuadorian legal system.

On the use of visual methodologies in educational policy research

African Journals Online (AJOL)

methodological and policy implications that could be applied to a variety of ... approach involves the analysis of images, including the context, content, and .... to govern, modern states have participated in shaping and handling the behaviour of ...

Certification Plan, Radioactive Mixed Waste Hazardous Waste Handling Facility

International Nuclear Information System (INIS)

Albert, R.

1992-01-01

The purpose of this plan is to describe the organization and methodology for the certification of radioactive mixed waste (RMW) handled in the Hazardous Waste Handling Facility at Lawrence Berkeley Laboratory (LBL). RMW is low-level radioactive waste (LLW) or transuranic (TRU) waste that is co-contaminated with dangerous waste as defined in the Westinghouse Hanford Company (WHC) Solid Waste Acceptance Criteria (WAC) and the Washington State Dangerous Waste Regulations, 173-303-040 (18). This waste is to be transferred to the Hanford Site Central Waste Complex and Burial Grounds in Hanford, Washington. This plan incorporates the applicable elements of waste reduction, which include both up-front minimization and end-product treatment to reduce the volume and toxicity of the waste; segregation of the waste as it applies to certification; an executive summary of the Waste Management Quality Assurance Implementing Management Plan (QAIMP) for the HWHF (Section 4); and a list of the current and planned implementing procedures used in waste certification

Formalizing the ISDF Software Development Methodology

Directory of Open Access Journals (Sweden)

Mihai Liviu DESPA

2015-01-01

Full Text Available The paper is aimed at depicting the ISDF software development methodology by emphasizing quality management and software development lifecycle. The ISDF methodology was built especially for innovative software development projects. The ISDF methodology was developed empirically by trial and error in the process of implementing multiple innovative projects. The research process began by analysing key concepts like innovation and software development and by settling the important dilemma of what makes a web application innovative. Innovation in software development is presented from the end-user, project owner and project manager’s point of view. The main components of a software development methodology are identified. Thus a software development methodology should account for people, roles, skills, teams, tools, techniques, processes, activities, standards, quality measuring tools, and team values. Current software development models are presented and briefly analysed. The need for a dedicated innovation oriented software development methodology is emphasized by highlighting shortcomings of current software development methodologies when tackling innovation. The ISDF methodology is presented in the context of developing an actual application. The ALHPA application is used as a case study for emphasizing the characteristics of the ISDF methodology. The development life cycle of the ISDF methodology includes research, planning, prototyping, design, development, testing, setup and maintenance. Artefacts generated by the ISDF methodology are presented. Quality is managed in the ISDF methodology by assessing compliance, usability, reliability, repeatability, availability and security. In order to properly asses each quality component a dedicated indicator is built. A template for interpreting each indicator is provided. Conclusions are formulated and new related research topics are submitted for debate.

Electronic Publishing or Electronic Information Handling?

Science.gov (United States)

Heck, A.

The current dramatic evolution in information technology is bringing major modifications in the way scientists communicate. The concept of 'electronic publishing' is too restrictive and has often different, sometimes conflicting, interpretations. It is thus giving way to the broader notion of 'electronic information handling' encompassing the diverse types of information, the different media, as well as the various communication methodologies and technologies. New problems and challenges result also from this new information culture, especially on legal, ethical, and educational grounds. The procedures for validating 'published material' and for evaluating scientific activities will have to be adjusted too. 'Fluid' information is becoming a common concept. Electronic publishing cannot be conceived without link to knowledge bases nor without intelligent information retrieval tools.

Applying HAZOP analysis in assessing remote handling compatibility of ITER port plugs

International Nuclear Information System (INIS)

Duisings, L.P.M.; Til, S. van; Magielsen, A.J.; Ronden, D.M.S.; Elzendoorn, B.S.Q.; Heemskerk, C.J.M.

2013-01-01

Highlights: ► We applied HAZOP analysis to assess the criticality of remote handling maintenance activities on port plugs in the ITER Hot Cell facility. ► We identified several weak points in the general upper port plug maintenance concept. ► We made clear recommendations on redesign in port plug design, operational sequence and Hot Cell equipment. ► The use of a HAZOP approach for the ECH UL port can also be applied to ITER port plugs in general. -- Abstract: This paper describes the application of a Hazard and Operability Analysis (HAZOP) methodology in assessing the criticality of remote handling maintenance activities on port plugs in the ITER Hot Cell facility. As part of the ECHUL consortium, the remote handling team at the DIFFER Institute is developing maintenance tools and procedures for critical components of the ECH Upper launcher (UL). Based on NRG's experience with nuclear risk analysis and Hot Cell procedures, early versions of these tool concepts and maintenance procedures were subjected to a HAZOP analysis. The analysis identified several weak points in the general upper port plug maintenance concept and led to clear recommendations on redesigns in port plug design, the operational sequence and ITER Hot Cell equipment. The paper describes the HAZOP methodology and illustrates its application with specific procedures: the Steering Mirror Assembly (SMA) replacement and the exchange of the Mid Shield Optics (MSO) in the ECH UPL. A selection of recommended changes to the launcher design associated with the accessibility, maintainability and manageability of replaceable components are presented

Introduction of an electronic monitoring system for monitoring compliance with Moments 1 and 4 of the WHO "My 5 Moments for Hand Hygiene" methodology.

Science.gov (United States)

Cheng, Vincent C C; Tai, Josepha W M; Ho, Sara K Y; Chan, Jasper F W; Hung, Kwan Ngai; Ho, Pak Leung; Yuen, Kwok Yung

2011-05-26

MedSense is an electronic hand hygiene compliance monitoring system that provides Infection Control Practitioners with continuous access to hand hygiene compliance information by monitoring Moments 1 and 4 of the WHO "My 5 Moments for Hand Hygiene" guidelines. Unlike previous electronic monitoring systems, MedSense operates in open cubicles with multiple beds and does not disrupt existing workflows. This study was conducted in a 6-bed neurosurgical intensive care unit with technical development and evaluation phases. Healthcare workers (HCWs) wore an electronic device in the style of an identity badge to detect hand hygiene opportunities and compliance. We compared the compliance determined by the system and an infection control nurse. At the same time, the system assessed compliance by time of day, day of week, work shift, professional category of HCWs, and individual subject, while the workload of HCWs was monitored by measuring the amount of time they spent in patient zones. During the three-month evaluation phase, the system identified 13,694 hand hygiene opportunities from 17 nurses, 3 physiotherapists, and 1 healthcare assistant, resulting in an overall compliance of 35.1% for the unit. The per-indication compliance for Moment 1, 4, and simultaneous 1 and 4 were 21.3% (95%CI: 19.0, 23.6), 39.6% (95%CI: 37.3, 41.9), and 49.2% (95%CI: 46.6, 51.8), respectively, and were all statistically significantly different (p monitored concurrently by the system and infection control nurse, the compliance were 88.9% and 95.6% respectively (p = 0.34), and the activity indices were 11.1 and 12.9 opportunities per hour, respectively. The hours from 12:00 to 14:00 had a notably lower compliance (21.3%, 95%CI: 17.2, 25.3) than nearly three quarters of the other periods of the day (p < 0.001). Nurses who used shared badges had significantly (p < 0.01) lower compliance (23.7%, 95%CI: 17.8, 29.6) than both the registered nurses (36.1%, 95%CI: 34.2, 37.9) and nursing officers (34

Use of the project management methodology to establish physical protection system at nuclear facility

International Nuclear Information System (INIS)

Gramotkin, F.; Kuzmyak, I.; Kravtsov, V.

2015-01-01

The paper considers the possibility of using the project management methodology developed by the Project Management Institute (USA) in nuclear security in terms of modernization or development of physical protection system at nuclear facility. It was demonstrated that this methodology allows competent and flexible management of the projects on physical protection, ensuring effective control of their timely implementation in compliance with the planned budget and quality

PENINGKATAN KINERJA OHMS (ORDER HANDLING MANUFACTURING SYSTEM) MELALUI SOFT SYSTEMS METHODOLOGY (SSM)

OpenAIRE

Slamet Budiarto

2011-01-01

Dalam penelitian ini, untuk meningkatkan kinerja OHMS yang karakteristiknya lebih kompleks, digunakan soft systems methodology yang banyak membantu para manajer untuk menyelesaikan masalah yang bervariasi dan kompleks. Permasalahan tersebut sering menemui kegagalan dalam penyelesaiannya ketika pendekatan system engineering (SE) digunakan. Penelitian menunjukan gambaran aktivitas lebih jelas, dan penentuan indikator lebih terstruktur dengan mengkombinasikan IDEF0. Melalui soft systems met...

Formalizing and appling compliance patterns for business process compliance

NARCIS (Netherlands)

Elgammal, A.; Turetken, O.; van den Heuvel, W.; Papazoglou, M.

2016-01-01

Today’s enterprises demand a high degree of compliance of business processes to meet diverse regulations and legislations. Several industrial studies have shown that compliance management is a daunting task, and organizations are still struggling and spending billions of dollars annually to ensure

Formalizing and applying compliance patterns for business process compliance

NARCIS (Netherlands)

Elgammal, A.F.S.A.; Türetken, O.; van den Heuvel, W.J.A.M.; Papazoglou, M.

Today’s enterprises demand a high degree of compliance of business processes to meet diverse regulations and legislations. Several industrial studies have shown that compliance management is a daunting task, and organizations are still struggling and spending billions of dollars annually to ensure

Diagnostic information for compliance checking of temporal compliance requirements

NARCIS (Netherlands)

Ramezani Taghiabadi, E.; Fahland, D.; Dongen, van B.F.; Aalst, van der W.M.P.; Salinesi, C.; Norrie, M.C.; Pastor, O.

2013-01-01

Compliance checking is gaining importance as today’s organizations need to show that operational processes are executed in a controlled manner while satisfying predefined (legal) requirements or service level agreements. Deviations may be costly and expose an organization to severe risks. Compliance

Introduction of an electronic monitoring system for monitoring compliance with Moments 1 and 4 of the WHO "My 5 Moments for Hand Hygiene" methodology

Directory of Open Access Journals (Sweden)

Chan Jasper FW

2011-05-01

Full Text Available Abstract Background MedSense is an electronic hand hygiene compliance monitoring system that provides Infection Control Practitioners with continuous access to hand hygiene compliance information by monitoring Moments 1 and 4 of the WHO "My 5 Moments for Hand Hygiene" guidelines. Unlike previous electronic monitoring systems, MedSense operates in open cubicles with multiple beds and does not disrupt existing workflows. Methods This study was conducted in a 6-bed neurosurgical intensive care unit with technical development and evaluation phases. Healthcare workers (HCWs wore an electronic device in the style of an identity badge to detect hand hygiene opportunities and compliance. We compared the compliance determined by the system and an infection control nurse. At the same time, the system assessed compliance by time of day, day of week, work shift, professional category of HCWs, and individual subject, while the workload of HCWs was monitored by measuring the amount of time they spent in patient zones. Results During the three-month evaluation phase, the system identified 13,694 hand hygiene opportunities from 17 nurses, 3 physiotherapists, and 1 healthcare assistant, resulting in an overall compliance of 35.1% for the unit. The per-indication compliance for Moment 1, 4, and simultaneous 1 and 4 were 21.3% (95%CI: 19.0, 23.6, 39.6% (95%CI: 37.3, 41.9, and 49.2% (95%CI: 46.6, 51.8, respectively, and were all statistically significantly different (p Conclusion MedSense provides an unobtrusive and objective measurement of hand hygiene compliance. The information is important for staff training by the infection control team and allocation of manpower by hospital administration.

Recommendations for cask features for robotic handling from the Advanced Handling Technology Project

International Nuclear Information System (INIS)

Drotning, W.

1991-02-01

This report describes the current status and recent progress in the Advanced Handling Technology Project (AHTP) initiated to explore the use of advanced robotic systems and handling technologies to perform automated cask handling operations at radioactive waste handling facilities, and to provide guidance to cask designers on the impact of robotic handling on cask design. Current AHTP tasks have developed system mock-ups to investigate robotic manipulation of impact limiters and cask tiedowns. In addition, cask uprighting and transport, using computer control of a bridge crane and robot, were performed to demonstrate the high speed cask transport operation possible under computer control. All of the current AHTP tasks involving manipulation of impact limiters and tiedowns require robotic operations using a torque wrench. To perform these operations, a pneumatic torque wrench and control system were integrated into the tool suite and control architecture of the gantry robot. The use of captured fasteners is briefly discussed as an area where alternative cask design preferences have resulted from the influence of guidance for robotic handling vs traditional operations experience. Specific robotic handling experiences with these system mock-ups highlight a number of continually recurring design principles: (1) robotic handling feasibility is improved by mechanical designs which emphasize operation with limited dexterity in constrained workspaces; (2) clearances, tolerances, and chamfers must allow for operations under actual conditions with consideration for misalignment and imprecise fixturing; (3) successful robotic handling is enhanced by including design detail in representations for model-based control; (4) robotic handling and overall quality assurance are improved by designs which eliminate the use of loose, disassembled parts. 8 refs., 15 figs

Methodological Issues on Climate Change Mitigation Studies

DEFF Research Database (Denmark)

Sørensen, Lene; Borges, Pedro Castro; Vidal, Rene Victor Valqui

1999-01-01

This paper uses national greenhouse gas emission abatement costing studies as a case to discuss influential factors that determine their outcome and achievement. Costing studies are seen as part of an interconnected whole social process where actors (decision makers, clients, facilitators, expert...... such methodologies to case studies is seen as one way of improving the chances of understanding and handling environmental problems...

Methodology for the hybrid solution of systems of differential equations

International Nuclear Information System (INIS)

Larrinaga, E.F.; Lopez, M.A.

1993-01-01

This work shows a general methodology of solution to systems of differential equations in hybrid computers. Taking into account this methodology, a mathematical model was elaborated. It offers wide possibilities of recording and handling the results on the basis of using the hybrid system IBM-VIDAC 1224 which the ISCTN has. It also presents the results gained when simulating a simple model of a nuclear reactor, which was used in the validation of the results of the computational model

Tethered particle analysis of supercoiled circular DNA using peptide nucleic acid handles.

Science.gov (United States)

Norregaard, Kamilla; Andersson, Magnus; Nielsen, Peter Eigil; Brown, Stanley; Oddershede, Lene B

2014-09-01

This protocol describes how to monitor individual naturally supercoiled circular DNA plasmids bound via peptide nucleic acid (PNA) handles between a bead and a surface. The protocol was developed for single-molecule investigation of the dynamics of supercoiled DNA, and it allows the investigation of both the dynamics of the molecule itself and of its interactions with a regulatory protein. Two bis-PNA clamps designed to bind with extremely high affinity to predetermined homopurine sequence sites in supercoiled DNA are prepared: one conjugated with digoxigenin for attachment to an anti-digoxigenin-coated glass cover slide, and one conjugated with biotin for attachment to a submicron-sized streptavidin-coated polystyrene bead. Plasmids are constructed, purified and incubated with the PNA handles. The dynamics of the construct is analyzed by tracking the tethered bead using video microscopy: less supercoiling results in more movement, and more supercoiling results in less movement. In contrast to other single-molecule methodologies, the current methodology allows for studying DNA in its naturally supercoiled state with constant linking number and constant writhe. The protocol has potential for use in studying the influence of supercoils on the dynamics of DNA and its associated proteins, e.g., topoisomerase. The procedure takes ~4 weeks.

Low-level waste certification plan for the Lawrence Berkeley Laboratory Hazardous Waste Handling Facility. Revision 1

International Nuclear Information System (INIS)

1995-01-01

The purpose of this plan is to describe the organization and methodology for the certification of low-level radioactive waste (LLW) handled in the Hazardous Waste Handling Facility (HWHF) at Lawrence Berkeley Laboratory (LBL). This plan is composed to meet the requirements found in the Westinghouse Hanford Company (WHC) Solid Waste Acceptance Criteria (WAC) and follows the suggested outline provided by WHC in the letter of April 26, 1990, to Dr. R.H. Thomas, Occupational Health Division, LBL. LLW is to be transferred to the WHC Hanford Site Central Waste Complex and Burial Grounds in Hanford, Washington

Low-level waste certification plan for the Lawrence Berkeley Laboratory Hazardous Waste Handling Facility. Revision 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-01-10

The purpose of this plan is to describe the organization and methodology for the certification of low-level radioactive waste (LLW) handled in the Hazardous Waste Handling Facility (HWHF) at Lawrence Berkeley Laboratory (LBL). This plan is composed to meet the requirements found in the Westinghouse Hanford Company (WHC) Solid Waste Acceptance Criteria (WAC) and follows the suggested outline provided by WHC in the letter of April 26, 1990, to Dr. R.H. Thomas, Occupational Health Division, LBL. LLW is to be transferred to the WHC Hanford Site Central Waste Complex and Burial Grounds in Hanford, Washington.

Adolescents' Compliance-Resistance: Effects of Parents' Compliance Strategy and Gender.

Science.gov (United States)

White, Kim D.; And Others

1989-01-01

Examined choice of compliance-resisting behaviors among adolescents. Findings from 118 high school students revealed significant differences in resistance strategy the adolescent selected on basis of parent gender, adolescent gender, and compliance-gaining strategy (manipulation, nonnegotiation, emotional appeal, personal rejection, empathic…

Compliance checking of data-aware and resource-aware compliance requirements

NARCIS (Netherlands)

Ramezani Taghiabadi, E.; Gromov, V.; Fahland, D.; Aalst, van der W.M.P.; Meersman, R.; Panetto, H.; Dillon, T.; Missikoff, M.; Liu, L.; Pastor, O.; Cuzzocrea, A.; Sllis, T.

2014-01-01

Compliance checking is gaining importance as today’s organizations need to show that their business practices are in accordance with predefined (legal) requirements. Current compliance checking techniques are mostly focused on checking the control-flow perspective of business processes. This paper

Compliance status

International Nuclear Information System (INIS)

Black, D.G.

1995-01-01

This section of the 1994 Hanford Site Environmental Report summarizes the activities conducted to ensure that the Hanford Site is in compliance with federal environmental protection statutes and related Washington State and local environmental protection regulations and the status of Hanford's compliance with these requirements. Environmental permits required under the environmental protection regulations are discussed under the applicable statute

Interventions to improve hand hygiene compliance in patient care.

Science.gov (United States)

Gould, Dinah J; Moralejo, Donna; Drey, Nicholas; Chudleigh, Jane H

2010-09-08

same paper: simple substitutions of product and two multifaceted campaigns, one of which included involving practitioners in making decisions about choice of hand hygiene products and the components of the hand hygiene program. The other study also presented two separate multifaceted campaigns, one of which involved application of social marketing theory. In these two studies follow-up data collection continued beyond twelve months, and a proxy measure of hand hygiene compliance (product use) was recorded. Microbiological data were recorded in one study. Hand hygiene compliance increased for one of the studies where it was measured by direct observation, but the results from the other study were not conclusive. Product use increased in the two studies in which it was reported, with inconsistent results reported for one initiative. MRSA incidence decreased in the one study reporting microbiological data. The quality of intervention studies intended to increase hand hygiene compliance remains disappointing. Although multifaceted campaigns with social marketing or staff involvement appear to have an effect, there is insufficient evidence to draw a firm conclusion. There remains an urgent need to undertake methodologically robust research to explore the effectiveness of soundly designed and implemented interventions to increase hand hygiene compliance.

Survey of current lead use, handling, hygiene, and contaminant controls among New Jersey industries.

Science.gov (United States)

Blando, James D; Lefkowitz, Daniel K; Valiante, David; Gerwel, Barbara; Bresnitz, Eddy

2007-08-01

In 2003, a chemical handling and use survey was mailed to New Jersey employers identified as currently using lead in their industrial processes. This survey was used to ascertain characteristics about lead use, handling, and protection of employees during manufacturing operations. The survey included a diverse group of current lead users with a total lead use range from less than 1 pound to more than 63 million pounds of lead per year. The survey allowed for a comprehensive characterization of hazards and protective measures associated with this metal, still commonly used in many products and industrial processes. Forty-five surveys were returned by companies that are listed in the New Jersey Adult Blood Lead Registry, which is part of the New Jersey Adult Blood Lead Epidemiology and Surveillance (ABLES) program. This program records and investigates cases of adults with greater than 25 mu g/dL of lead in their blood; most cases are related to occupational exposures. This survey found that greater than 25% of these surveyed companies with significant potential for lead exposure did not employ commonly used and basic industrial hygiene practices. In addition, the survey found that 24% of these companies had not conducted air sampling within the last 3 years. Air sampling is the primary trigger for compliance with the Occupational Safety and Health Administration (OSHA) general industry lead standard. Only 17% of the companies have ever been cited for a violation of the OSHA lead standard, and only 46% of these companies have ever had an OSHA inspection. State-based surveillance can be a useful tool for OSHA enforcement activities. Elevated blood lead values in adults should be considered as a trigger for required compliance with an OSHA general industry lead standard.

Experimental study of a methodology for Fission-track Dating without neutron irradiation

International Nuclear Information System (INIS)

Hadler, J.C.; Iunes, P.J.; Tello, C.A.; Chemale, F.; Kawashita, K.; Curvo, E.A.C.; Santos, F.G.S.; Gasparini, T.E.; Moreira, P.A.F.P.; Guedes, S.

2009-01-01

To carry out the dating by the Fission Track Method (FTM) the international community that works with this method employs methodologies in which the mineral to be dated must be irradiated with neutrons. Such irradiation, performed in a nuclear reactor, demand a relatively long waiting time so that the activity of the sample attain a proper level for handling. The present work aims to establish a methodology that makes possible the dating by FTM using a mass spectrometer instead of a nuclear reactor. This methodology was applied to apatite samples from Durango, Mexico.

Compliance status

Energy Technology Data Exchange (ETDEWEB)

Black, D.G.

1995-06-01

This section of the 1994 Hanford Site Environmental Report summarizes the activities conducted to ensure that the Hanford Site is in compliance with federal environmental protection statutes and related Washington State and local environmental protection regulations and the status of Hanford`s compliance with these requirements. Environmental permits required under the environmental protection regulations are discussed under the applicable statute.

Performing compliance

DEFF Research Database (Denmark)

Wimmelmann, Camilla Lawaetz

2017-01-01

the local policy workers front-staged some practices in the implementation process and back-staged others. The local policy workers deliberately performed ‘guideline compliance’ by using information control and impression management techniques. The findings suggest that local guideline compliance should...... be regarded as a staged performance in which deliberate techniques are used to produce and manage certain impressions of compliance....

Microphone Handling Noise: Measurements of Perceptual Threshold and Effects on Audio Quality.

Directory of Open Access Journals (Sweden)

Paul Kendrick

Full Text Available A psychoacoustic experiment was carried out to test the effects of microphone handling noise on perceived audio quality. Handling noise is a problem affecting both amateurs using their smartphones and cameras, as well as professionals using separate microphones and digital recorders. The noises used for the tests were measured from a variety of devices, including smartphones, laptops and handheld microphones. The signal features that characterise these noises are analysed and presented. The sounds include various types of transient, impact noises created by tapping or knocking devices, as well as more sustained sounds caused by rubbing. During the perceptual tests, listeners auditioned speech podcasts and were asked to rate the degradation of any unwanted sounds they heard. A representative design test methodology was developed that tried to encourage everyday rather than analytical listening. Signal-to-noise ratio (SNR of the handling noise events was shown to be the best predictor of quality degradation. Other factors such as noise type or background noise in the listening environment did not significantly affect quality ratings. Podcast, microphone type and reproduction equipment were found to be significant but only to a small extent. A model allowing the prediction of degradation from the SNR is presented. The SNR threshold at which 50% of subjects noticed handling noise was found to be 4.2 ± 0.6 dBA. The results from this work are important for the understanding of our perception of impact sound and resonant noises in recordings, and will inform the future development of an automated predictor of quality for handling noise.

Methodology of the Auditing Measures to Civil Airport Security and Protection

Directory of Open Access Journals (Sweden)

Ján Kolesár

2016-10-01

Full Text Available Airports similarly to other companies are certified in compliance with the International Standardization Organization (ISO standards of products and services (series of ISO 9000 Standards regarding quality management, to coordinate the technical side of standardizatioon and normalization at an international scale. In order for the airports to meet the norms and the certification requirements as by the ISO they are liable to undergo strict audits of quality, as a rule, conducted by an independent auditing organization. Focus of the audits is primarily on airport operation economics and security. The article is an analysis into the methodology of the airport security audit processes and activities. Within the framework of planning, the sequence of steps is described in line with the principles and procedures of the Security Management System (SMS and starndards established by the International Standardization Organization (ISO. The methodology of conducting airport security audit is developed in compliance with the national programme and international legislation standards (Annex 17 applicable to protection of civil aviation against acts of unlawful interference.

Full scale tests on remote handled FFTF fuel assembly waste handling and packaging

International Nuclear Information System (INIS)

Allen, C.R.; Cash, R.J.; Dawson, S.A.; Strode, J.N.

1986-01-01

Handling and packaging of remote handled, high activity solid waste fuel assembly hardware components from spent FFTF reactor fuel assemblies have been evaluated using full scale components. The demonstration was performed using FFTF fuel assembly components and simulated components which were handled remotely using electromechanical manipulators, shielding walls, master slave manipulators, specially designed grapples, and remote TV viewing. The testing and evaluation included handling, packaging for current and conceptual shipping containers, and the effects of volume reduction on packing efficiency and shielding requirements. Effects of waste segregation into transuranic (TRU) and non-transuranic fractions also are discussed

The role of scientific uncertainty in compliance with the Kyoto Protocol to the Climate Change Convention

International Nuclear Information System (INIS)

Gupta, Joyeeta; Olsthoorn, Xander; Rotenberg, Edan

2003-01-01

Under the climate change treaties, developed countries are under a quantitative obligation to limit their emissions of greenhouse gases (GHG). This paper argues that although the climate change regime is setting up various measures and mechanisms, there will still be significant uncertainty about the actual emission reductions and the effectiveness of the regime will depend largely on how countries actually implement their obligations in practice. These uncertainties arise from the calculation of emissions from each source, the tallying up these emissions, adding or deducting changes due to land use change and forestry (LUCF) and finally from subtracting or adding emission reduction units (ERUs). Further, it points to the problem of uncertainty in the reductions as opposed to the uncertainty in the inventories themselves. The protocols have temporarily opted to deal with these problems through harmonisation in reporting methodologies and to seek transparency by calling on parties involved to use specific guidelines and to report on their uncertainty. This paper concludes that this harmonisation of reporting methodologies does not account for regional differences and that while transparency will indicate when countries are adopting strategies that have high uncertainty; it will not help to increase the effectiveness of the protocol. Uncertainty about compliance then becomes a critical issue. This paper proposes to reduce this uncertainty in compliance by setting a minimum requirement for the probability of compliance

A performance assessment methodology for low-level radioactive waste disposal

International Nuclear Information System (INIS)

Derring, L.R.

1990-01-01

To demonstrate compliance with the performance objectives governing protection of the general population in 10 CFR 61.41, applicants for land disposal of low-level radioactive waste are required to conduct a pathways analysis, or quantitative evaluation of radionuclide release, transport through environmental media, and dose to man. The Nuclear Regulatory Commission staff defined a strategy and initiated a project at Sandia National Laboratories to develop a methodology for independently evaluating an applicant's analysis of postclosure performance. This performance assessment methodology was developed in five stages: identification of environmental pathways, ranking the significance of the pathways, identification and integration of models for pathway analyses, identification and selection of computer codes and techniques for the methodology, and implementation of the codes and documentation of the methodology. This paper summarizes the NRC approach for conducting evaluations of license applications for low-level radioactive waste facilities. 23 refs

Compliance and treatment satisfaction of post menopausal women treated for osteoporosis. Compliance with osteoporosis treatment

Directory of Open Access Journals (Sweden)

Huas Dominique

2010-08-01

Full Text Available Abstract Background Adherence to anti-osteoporosis treatments is poor, exposing treated women to increased fracture risk. Determinants of poor adherence are poorly understood. The study aims to determine physician- and patient- rated treatment compliance with osteoporosis treatments and to evaluate factors influencing compliance. Methods This was an observational, cross-sectional pharmacoepidemiological study with a randomly-selected sample of 420 GPs, 154 rheumatologists and 110 gynaecologists practicing in France. Investigators included post-menopausal women with a diagnosis of osteoporosis and a treatment initiated in the previous six months. Investigators completed a questionnaire on clinical features, treatments and medical history, and on patient compliance. Patients completed a questionnaire on sociodemographic features, lifestyle, attitudes and knowledge about osteoporosis, treatment compliance, treatment satisfaction and quality of life. Treatment compliance was evaluated with the Morisky Medication-taking Adherence Scale. Variables collected in the questionnaires were evaluated for association with compliance using multivariate logistic regression analysis. Results 785 women were evaluated. Physicians considered 95.4% of the sample to be compliant, but only 65.5% of women considered themselves compliant. The correlation between patient and physician perceptions of compliance was low (κ: 0.11 [95% CI: 0.06 to 0.16]. Patient-rated compliance was highest for monthly bisphosphonates (79.7% and lowest for hormone substitution therapy (50.0%. Six variables were associated with compliance: treatment administration frequency, perceptions of long-term treatment acceptability, perceptions of health consequences of osteoporosis, perceptions of knowledge about osteoporosis, exercise and mental quality of life. Conclusion Compliance to anti-osteoporosis treatments is poor. Reduction of dosing regimen frequency and patient education may be useful

SIMULATION OF DRIVER’S LOCOMOTIVE-HANDLING ACTIVITY USING THE THEORY OF FUZZY GRAPHS

Directory of Open Access Journals (Sweden)

T. V. Butko

2015-03-01

Full Text Available Purpose. The efficiency and safety of locomotive control improving is important and relevant scientific and practical problem. Every driver during the trains-handling bases on his experience and knowledge, that is why the compilation and detection the most efficient ways to control the locomotive-handling is one of the stages of measures development to reduce transportation costs. The purpose of this paper is a formalization process description of locomotive-handling and quality parameters determination of this process. Methodology. In order to achieve this goal the theory of fuzzy probabilistic graphs was used. Vertices of the graph correspond to the events start and end operations at train-handling. The graph arcs describe operations on train-handling. Graph consists of thirteen peaks corresponding to the main control actions of the engine-driver. The weighting factors of transitions between vertices are assigned by fuzzy numbers. Their values were obtained by expert estimates. Fuzzy probabilities and transition time are presented as numbers with trapezoidal membership function. Findings. Using successive merging of parallel arcs, loops and vertices elimination, the equivalent fuzzy graph of train-handling and the corresponding L-matrix were obtained. Equivalent graph takes into account separately activity of the driver during normal operation and during emergency situations. Originality. The theoretical foundations of describing process formalization in driver’s locomotive-handling activity were developed using the fuzzy probabilistic graph. The parameters characterizing the decision-making process of engineer were obtained. Practical value. With the resulting model it is possible to estimate the available reserves for the quality improvement of locomotive-handling. Reduction in the time for decision-making will lead to the approximation the current mode of control to the rational one and decrease costs of hauling operations. And reduction

Ergonomic material-handling device

Science.gov (United States)

Barsnick, Lance E.; Zalk, David M.; Perry, Catherine M.; Biggs, Terry; Tageson, Robert E.

2004-08-24

A hand-held ergonomic material-handling device capable of moving heavy objects, such as large waste containers and other large objects requiring mechanical assistance. The ergonomic material-handling device can be used with neutral postures of the back, shoulders, wrists and knees, thereby reducing potential injury to the user. The device involves two key features: 1) gives the user the ability to adjust the height of the handles of the device to ergonomically fit the needs of the user's back, wrists and shoulders; and 2) has a rounded handlebar shape, as well as the size and configuration of the handles which keep the user's wrists in a neutral posture during manipulation of the device.

Environmental Compliance Guide

International Nuclear Information System (INIS)

1981-02-01

The Guide is intended to assist Department of Energy personnel by providing information on the NEPA process, the processes of other environmental statutes that bear on the NEPA process, the timing relationships between the NEPA process and these other processes, as well as timing relationships between the NEPA process and the development process for policies, programs, and projects. This information should be helpful not only in formulating environmental compliance plans but also in achieving compliance with NEPA and various other environmental statutes. The Guide is divided into three parts with related appendices: Part I provides guidance for developing environmental compliance plans for DOE actions; Part II is devoted to NEPA with detailed flowcharts depicting the compliance procedures required by CEQ regulations and Department of Energy NEPA Guidelines; and Part III contains a series of flowcharts for other Federal environmental requirements that may apply to DOE projects

Environmental Compliance Guide

Energy Technology Data Exchange (ETDEWEB)

None

1981-02-01

The Guide is intended to assist Department of Energy personnel by providing information on the NEPA process, the processes of other environmental statutes that bear on the NEPA process, the timing relationships between the NEPA process and these other processes, as well as timing relationships between the NEPA process and the development process for policies, programs, and projects. This information should be helpful not only in formulating environmental compliance plans but also in achieving compliance with NEPA and various other environmental statutes. The Guide is divided into three parts with related appendices: Part I provides guidance for developing environmental compliance plans for DOE actions; Part II is devoted to NEPA with detailed flowcharts depicting the compliance procedures required by CEQ regulations and Department of Energy NEPA Guidelines; and Part III contains a series of flowcharts for other Federal environmental requirements that may apply to DOE projects.

Choices that increase compliance

International Nuclear Information System (INIS)

Edwards, P.R.

1991-01-01

A compliance model is developed and tested using a survey of corporate officials and the regulatory arena of equal employment opportunity. Findings support the economic model of compliance in its conclusion that probability of detection and probable level of sanctions influence compliance decisions. Results also indicate that adjustments to the model that account for bounded rationality are valid. The key outcome, however, is that although all types of investigations play some role in enhancing compliance, those that stress sanctions and thus severity rather than certainty of detection may have the greatest positive influence on compliance. Enforcement programs attempting to operate simply as investigators of small-scale complaints will have less success than those with different types of investigations or a balanced type of single investigation. The results also suggest a more complex cognitive process on the part of regulated individuals than initially theorized. 34 refs., 3 tabs

Methodology for evaluation of alternative technologies applied to nuclear fuel reprocessing

International Nuclear Information System (INIS)

Selvaduray, G.S.; Goldstein, M.K.; Anderson, R.N.

1977-07-01

An analytic methodology has been developed to compare the performance of various nuclear fuel reprocessing techniques for advanced fuel cycle applications including low proliferation risk systems. The need to identify and to compare those processes, which have the versatility to handle the variety of fuel types expected to be in use in the next century, is becoming increasingly imperative. This methodology allows processes in any stage of development to be compared and to assess the effect of changing external conditions on the process

Hazardous Waste Cerification Plan: Hazardous Waste Handling Facility, Lawrence Berkeley Laboratory

International Nuclear Information System (INIS)

1992-02-01

The purpose of this plan is to describe the organization and methodology for the certification of hazardous waste (HW) handled in the Lawrence Berkeley Laboratory (LBL) Hazardous Waste Handling Facility (HWHF). The plan also incorporates the applicable elements of waste reduction, which include both up-front minimization and end- product treatment to reduce the volume and toxicity of the waste; segregation of the waste as it applies to certification; and executive summary of the Quality Assurance Program Plan (QAPP) for the HWHF and a list of the current and planned implementing procedures used in waste certification. The plan provides guidance from the HWHF to waste generators, waste handlers, and the Systems Group Manager to enable them to conduct their activities and carry out their responsibilities in a manner that complies with several requirements of the Federal Resource Conservation and Resource Recovery Act (RCRA), the Federal Department of Transportation (DOT), and the State of California, Code of Regulations (CCR), Title 22

Compliance pluralisme and processes : Understanding compliance behavior in restaurants in China

NARCIS (Netherlands)

Wu, Y.

2017-01-01

This research aimed to offer a case study of dynamic compliance processes in selected Chinese restaurants with the main methods of participant observation and in-depth interviews. It applied an integrated and dynamic research approach, called descriptive analysis of compliance behavior, which

Radiological Characterization Methodology for INEEL-Stored Remote-Handled Transuranic (RH TRU) Waste from Argonne National Laboratory-East

International Nuclear Information System (INIS)

Kuan, P.; Bhatt, R.N.

2003-01-01

An Acceptable Knowledge (AK)-based radiological characterization methodology is being developed for RH TRU waste generated from ANL-E hot cell operations performed on fuel elements irradiated in the EBR-II reactor. The methodology relies on AK for composition of the fresh fuel elements, their irradiation history, and the waste generation and collection processes. Radiological characterization of the waste involves the estimates of the quantities of significant fission products and transuranic isotopes in the waste. Methods based on reactor and physics principles are used to achieve these estimates. Because of the availability of AK and the robustness of the calculation methods, the AK-based characterization methodology offers a superior alternative to traditional waste assay techniques. Using the methodology, it is shown that the radiological parameters of a test batch of ANL-E waste is well within the proposed WIPP Waste Acceptance Criteria limits

Proposed methodology for completion of scenario analysis for the Basalt Waste Isolation Project

International Nuclear Information System (INIS)

Roberds, W.J.; Plum, R.J.; Visca, P.J.

1984-11-01

This report presents the methodology to complete an assessment of postclosure performance, considering all credible scenarios, including the nominal case, for a proposed repository for high-level nuclear waste at the Hanford Site, Washington State. The methodology consists of defensible techniques for identifying and screening scenarios, and for then assessing the risks associated with each. The results of the scenario analysis are used to comprehensively determine system performance and/or risk for evaluation of compliance with postclosure performance criteria (10 CFR 60 and 40 CFR 191). In addition to describing the proposed methodology, this report reviews available methodologies for scenario analysis, discusses pertinent performance assessment and uncertainty concepts, advises how to implement the methodology (including the organizational requirements and a description of tasks) and recommends how to use the methodology in guiding future site characterization, analysis, and engineered subsystem design work. 36 refs., 24 figs., 1 tab

Interventions to improve hand hygiene compliance in patient care.

Science.gov (United States)

Gould, Dinah J; Moralejo, Donna; Drey, Nicholas; Chudleigh, Jane H; Taljaard, Monica

2017-09-01

certainty of evidence. With the identified variability in certainty of evidence, interventions, and methods, there remains an urgent need to undertake methodologically robust research to explore the effectiveness of multimodal versus simpler interventions to increase hand hygiene compliance, and to identify which components of multimodal interventions or combinations of strategies are most effective in a particular context.

A comparison of two short-term intensive physical activity interventions: methodological considerations

Directory of Open Access Journals (Sweden)

Norton Lynda H

2011-12-01

Full Text Available Abstract Background Increases in chronic illness due to sedentary lifestyles and poor metabolic fitness have led to numerous intervention strategies to promote physical activity (PA. This paper describes the methodological strategies of two short-term PA interventions. Outcome measures reported are PA adherence and compliance rates during the intervention and at 3, 6 and 12-month follow-up. Methods The 40-day interventions were: a pedometer-based walking program (n = 251 and a group-based intensive program (n = 148. There was also an active control group (n = 135. Intervention subjects were prescribed PA each day and required to record all activity sessions (pedometer steps or energy expenditure from heart rate monitors. Results Compliance (≥ 150 min/wk PA was highest post-intervention (81.1% and 64.5% for the group and pedometer subjects, respectively and then progressively decreased across the 12-month follow-up period (final compliance rates were 53.5% and 46.6%, respectively although they remained significantly higher than pre-intervention rates (zero %. There was significantly higher adherence to 6 months (75.0% and 64.9%, and compliance to 3 months (64.9% and 51.0%, for group versus pedometer subjects. The active control group maintained the highest adherence and compliance rates across the study. Conclusions The group-based program resulted in higher adherence and compliance rates post-intervention although both types of interventions showed long-term effectiveness to increase activity patterns.

30o inclination in handles of plastic boxes can reduce postural and muscular workload during handling

Directory of Open Access Journals (Sweden)

Luciana C. C. B. Silva

2013-06-01

Full Text Available BACKGROUND: The handling of materials, which occurs in the industrial sector, is associated with lesions on the lumbar spine and in the upper limbs. Inserting handles in industrial boxes is a way to reduce work-related risks. Although the position and angle of the handles are significant factors in comfort and safety during handling, these factors have rarely been studied objectively. OBJECTIVE: To compare the handling of a commercial box and prototypes with handles and to evaluate the effects on upper limb posture, muscle electrical activity, and perceived acceptability using different grips while handling materials from different heights. METHOD: Thirty-seven healthy volunteers evaluated the handles of prototypes that allowed for changes in position (top and bottom and angle (0°, 15°, and 30°. Wrist, elbow, and shoulder movements were evaluated using electrogoniometry and inclinometry. The muscle electrical activity in the wrist extensors, biceps brachii, and the upper portion of the trapezius was measured using a portable electromyographer. The recorded data on muscle movements and electrical activity were synchronized. Subjective evaluations of acceptability were evaluated using a visual analog scale. RESULTS AND CONCLUSIONS: The prototypes with handles at a 30° angle produced the highest acceptability ratings, more neutral wrist positions, lower levels of electromyographic activity for the upper trapezius, and lower elevation angles for the arms. The different measurement methods were complementary in evaluating the upper limbs during handling.

New transport and handling contract

CERN Multimedia

SC Department

2008-01-01

A new transport and handling contract entered into force on 1.10.2008. As with the previous contract, the user interface is the internal transport/handling request form on EDH: https://edh.cern.ch/Document/TransportRequest/ To ensure that you receive the best possible service, we invite you to complete the various fields as accurately as possible and to include a mobile telephone number on which we can reach you. You can follow the progress of your request (schedule, completion) in the EDH request routing information. We remind you that the following deadlines apply: 48 hours for the transport of heavy goods (up to 8 tonnes) or simple handling operations 5 working days for crane operations, transport of extra-heavy goods, complex handling operations and combined transport and handling operations in the tunnel. For all enquiries, the number to contact remains unchanged: 72202. Heavy Handling Section TS-HE-HH 72672 - 160319

Assessing materials handling and storage capacities in port terminals

Science.gov (United States)

Dinu, O.; Roşca, E.; Popa, M.; Roşca, M. A.; Rusca, A.

2017-08-01

Terminals constitute the factual interface between different modes and, as a result, buffer stocks are unavoidable whenever transport flows with different discontinuities meet. This is the reason why assessing materials handling and storage capacities is an important issue in the course of attempting to increase operative planning of logistic processes in terminals. Proposed paper starts with a brief review of the compatibilities between different sorts of materials and corresponding transport modes and after, a literature overview of the studies related to ports terminals and their specialization is made. As a methodology, discrete event simulation stands as a feasible technique for assessing handling and storage capacities at the terminal, taking into consideration the multi-flows interaction and the non-uniform arrivals of vessels and inland vehicles. In this context, a simulation model, that integrates the activities of an inland water terminal and describes the essential interactions between the subsystems which influence the terminal capacity, is developed. Different scenarios are simulated for diverse sorts of materials, leading to bottlenecks identification, performance indicators such as average storage occupancy rate, average dwell or transit times estimations, and their evolution is analysed in order to improve the transfer operations in the logistic process

Deadline Compliance Status Reports

Data.gov (United States)

Department of Housing and Urban Development — These monthly Deadline Compliance Status Reports assist Participating Jurisdictions and HUD Field Offices in monitoring compliance with the 2-year commitment and...

Standards should be applied in the prevention and handling of missing data for patient-centered outcomes research: a systematic review and expert consensus.

Science.gov (United States)

Li, Tianjing; Hutfless, Susan; Scharfstein, Daniel O; Daniels, Michael J; Hogan, Joseph W; Little, Roderick J A; Roy, Jason A; Law, Andrew H; Dickersin, Kay

2014-01-01

To recommend methodological standards in the prevention and handling of missing data for primary patient-centered outcomes research (PCOR). We searched National Library of Medicine Bookshelf and Catalog as well as regulatory agencies' and organizations' Web sites in January 2012 for guidance documents that had formal recommendations regarding missing data. We extracted the characteristics of included guidance documents and recommendations. Using a two-round modified Delphi survey, a multidisciplinary panel proposed mandatory standards on the prevention and handling of missing data for PCOR. We identified 1,790 records and assessed 30 as having relevant recommendations. We proposed 10 standards as mandatory, covering three domains. First, the single best approach is to prospectively prevent missing data occurrence. Second, use of valid statistical methods that properly reflect multiple sources of uncertainty is critical when analyzing missing data. Third, transparent and thorough reporting of missing data allows readers to judge the validity of the findings. We urge researchers to adopt rigorous methodology and promote good science by applying best practices to the prevention and handling of missing data. Developing guidance on the prevention and handling of missing data for observational studies and studies that use existing records is a priority for future research. Copyright © 2014 Elsevier Inc. All rights reserved.

A quality improvement project to improve the Medicare and Medicaid Services (CMS) sepsis bundle compliance rate in a large healthcare system.

Science.gov (United States)

Raschke, Robert A; Groves, Robert H; Khurana, Hargobind S; Nikhanj, Nidhi; Utter, Ethel; Hartling, Didi; Stoffer, Brenda; Nunn, Kristina; Tryon, Shona; Bruner, Michelle; Calleja, Maria; Curry, Steven C

2017-01-01

Sepsis is a leading cause of mortality and morbidity in hospitalised patients. The Centers for Medicare and Medicaid Services (CMS) mandated that US hospitals report sepsis bundle compliance rate as a quality process measure in October 2015. The specific aim of our study was to improve the CMS sepsis bundle compliance rate from 30% to 40% across 20 acute care hospitals in our healthcare system within 1 year. The study included all adult inpatients with sepsis sampled according to CMS specifications from October 2015 to September 2016. The CMS sepsis bundle compliance rate was tracked monthly using statistical process control charting. A baseline rate of 28.5% with 99% control limits was established. We implemented multiple interventions including computerised decision support systems (CDSSs) to increase compliance with the most commonly missing bundle elements. Compliance reached 42% (99% statistical process control limits 18.4%-38.6%) as CDSS was implemented system-wide, but this improvement was not sustained after CMS changed specifications of the outcome measure. Difficulties encountered elucidate shortcomings of our study methodology and of the CMS sepsis bundle compliance rate as a quality process measure.

Trends in Modern Exception Handling

Directory of Open Access Journals (Sweden)

Marcin Kuta

2003-01-01

Full Text Available Exception handling is nowadays a necessary component of error proof information systems. The paper presents overview of techniques and models of exception handling, problems connected with them and potential solutions. The aspects of implementation of propagation mechanisms and exception handling, their effect on semantics and general program efficiency are also taken into account. Presented mechanisms were adopted to modern programming languages. Considering design area, formal methods and formal verification of program properties we can notice exception handling mechanisms are weakly present what makes a field for future research.

Compliance. Regulatory policy P-211

International Nuclear Information System (INIS)

2001-05-01

This regulatory policy describes the basic principles and directives for establishing and conducting the Canadian Nuclear Safety Commission (CNSC) Compliance Program. The program is aimed at securing compliance by regulated persons with regulatory requirements made under the Nuclear Safety and Control Act ('the Act'). The policy applies to persons who are regulated by the CNSC through the Act, regulations and licences, as well as by decisions and orders made under the Act. The policy applies to officers and employees of the CNSC, and its authorized representatives or agents, who are involved in developing and carrying out compliance activities. Compliance, in the context of this policy, means conformity by regulated persons with the legally binding requirements of the Act, and the CNSC regulations, licences, decisions, and orders made under the Act. Compliance activities are CNSC measures of promotion, verification and enforcement aimed at securing compliance by regulated person with the applicable legally binding requirements. (author)

Museopathy: Exploring the Healing Potential of Handling Museum Objects

Directory of Open Access Journals (Sweden)

Helen Chatterjee

2009-11-01

Full Text Available To coincide with emerging arts and health practices, University College London Museums & Collections and University College London Hospitals Arts partnered to create a pilot project, entitled “Heritage in Hospitals”, which sought to assess whether handling museum objects has a positive impact on patient wellbeing. Quantitative data from 32 sessions conducted with patients in May through July (inclusive of 2008 demonstrated, on average, an increase in self-reported measures of life satisfaction and health status after handling museum objects. Constant comparative analysis of the qualitative data collected from the sessions revealed two major recurring themes: “impersonal/educational” and “personal/reminiscence”. The first theme included instances where handling museum objects allowed patients to access truths about the objects ascertainable solely through touch (such as gauging weight, texture, temperature, and spatial relation to the body, to verify what was seen, to facilitate an intimate and imaginative connection with the museum objects and their origins, to investigate and explore the objects, to permit an interaction with the “rare” and “museum-worthy”, and to assist with aesthetic appreciation. The second theme illustrated the project’s potential to assist with counselling on issues of illness, death, loss and mourning, and to help restore dignity, respect and a sense of identity (particularly among elderly patients by providing a springboard for reminiscing and the telling of life stories in a highly institutionalized setting. This paper contextualizes the project, explores the implications of the project’s methodology and its findings, and provides questions for future research.

12 CFR 1710.19 - Compliance and risk management programs; compliance with other laws.

Science.gov (United States)

2010-01-01

... OVERSIGHT, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT SAFETY AND SOUNDNESS CORPORATE GOVERNANCE Corporate Practices and Procedures § 1710.19 Compliance and risk management programs; compliance with other laws. (a...

“The 3/3 Strategy”: A Successful Multifaceted Hospital Wide Hand Hygiene Intervention Based on WHO and Continuous Quality Improvement Methodology

Science.gov (United States)

Mestre, Gabriel; Berbel, Cristina; Tortajada, Purificación; Alarcia, Margarita; Coca, Roser; Gallemi, Gema; Garcia, Irene; Fernández, Mari Mar; Aguilar, Mari Carmen; Martínez, José Antonio; Rodríguez-Baño, Jesús

2012-01-01

Background Only multifaceted hospital wide interventions have been successful in achieving sustained improvements in hand hygiene (HH) compliance. Methodology/Principal Findings Pre-post intervention study of HH performance at baseline (October 2007– December 2009) and during intervention, which included two phases. Phase 1 (2010) included multimodal WHO approach. Phase 2 (2011) added Continuous Quality Improvement (CQI) tools and was based on: a) Increase of alcohol hand rub (AHR) solution placement (from 0.57 dispensers/bed to 1.56); b) Increase in frequency of audits (three days every three weeks: “3/3 strategy”); c) Implementation of a standardized register form of HH corrective actions; d) Statistical Process Control (SPC) as time series analysis methodology through appropriate control charts. During the intervention period we performed 819 scheduled direct observation audits which provided data from 11,714 HH opportunities. The most remarkable findings were: a) significant improvements in HH compliance with respect to baseline (25% mean increase); b) sustained high level (82%) of HH compliance during intervention; c) significant increase in AHRs consumption over time; c) significant decrease in the rate of healthcare-acquired MRSA; d) small but significant improvements in HH compliance when comparing phase 2 to phase 1 [79.5% (95% CI: 78.2–80.7) vs 84.6% (95% CI:83.8–85.4), phygiene day”; and “negative”:73.7% as lowest HH compliance coinciding with a statutory lay-off proceeding). Conclusions/Significance CQI tools may be a key addition to WHO strategy to maintain a good HH performance over time. In addition, SPC has shown to be a powerful methodology to detect special causes in HH performance (positive and negative) and to help establishing adequate feedback to healthcare workers. PMID:23110061

Remote handling machines

International Nuclear Information System (INIS)

Sato, Shinri

1985-01-01

In nuclear power facilities, the management of radioactive wastes is made with its technology plus the automatic techniques. Under the radiation field, the maintenance or aid of such systems is important. To cope with this situation, MF-2 system, MF-3 system and a manipulator system as remote handling machines are described. MF-2 system consists of an MF-2 carrier truck, a control unit and a command trailer. It is capable of handling heavy-weight objects. The system is not by hydraulic but by electrical means. MF-3 system consists of a four-crawler truck and a manipulator. The truck is versatile in its posture by means of the four independent crawlers. The manipulator system is bilateral in operation, so that the delicate handling is made possible. (Mori, K.)

Georgia Compliance Review Self-Study FY 01.

Science.gov (United States)

Georgia State Dept. of Education, Atlanta.

Intended for evaluation of local compliance with special education federal and state legal requirements, this compliance review document includes both the compliance requirements and the criteria by which compliance is determined during the onsite compliance review of Georgia local school systems and state-operated programs. Each legal requirement…

Compliance with removable orthodontic appliances.

Science.gov (United States)

Shah, Nirmal

2017-12-22

Data sourcesMedline via OVID, PubMed, Cochrane Central Register of Controlled Trials, Web of Science Core Collection, LILACS and BBO databases. Unpublished clinical trials accessed using ClinicalTrials.gov, National Research Register, ProQuest Dissertation and Thesis database.Study selectionTwo authors searched studies from inception until May 2016 without language restrictions. Quantitative and qualitative studies incorporating objective data on compliance with removable appliances, barriers to appliance wear compliance, and interventions to improve compliance were included.Data extraction and synthesisQuality of research was assessed using the Cochrane Collaboration's risk of bias tool, the risk of bias in non-randomised studies of interventions (ROBINS-I), and the mixed methods appraisal tool. Statistical heterogeneity was investigated by examining a graphic display of the estimated compliance levels in conjunction with 95% confidence intervals and quantified using the I-squared statistic. A weighted estimate of objective compliance levels for different appliances in relation to stipulated wear and self-reported levels was also calculated. Risk of publication bias was assessed using funnel plots. Meta-regression was undertaken to assess the relative effects of appliance type on compliance levels.ResultsTwenty-four studies met the inclusion criteria. Of these, 11 were included in the quantitative synthesis. The mean duration of objectively measured wear was considerably lower than stipulated wear time amongst all appliances. Headgear had the greatest discrepancy (5.81 hours, 95% confidence interval, 4.98, 6.64). Self-reported wear time was consistently higher than objectively measured wear time amongst all appliances. Headgear had the greatest discrepancy (5.02 hours, 95% confidence interval, 3.64, 6.40). Two studies found an increase in compliance with headgear and Hawley retainers when patients were aware of monitoring. Five studies found younger age groups to

Compliance hotlines: practical advice for implementing a reporting mechanism.

Science.gov (United States)

Pastin, M J

1999-01-01

No element of a corporate compliance program in healthcare facilities generates more controversy than the hotline established for employees who wish to raise a concern. Healthcare organizations are adopting hotlines but with reluctance, mainly because of limited staff available to answer calls and because of limited support from upper management. Those that have committed to the hotline will tell you they can't imagine not having it. Running a good hotline means first answering such questions as whether it will be answered in-house, outsourced or handled through a combination of both means. The best organizations treat the hotline as a resource for employees, managers and physicians. If employees receive advice about policies over the hotline, however, it must be answered in-house. If multiple call answers are used, a secure file-sharing system, either paper or online, must be in use to track caller concerns. Most calls are routine, but one where the caller is reporting a serious infraction can save an organization millions of dollars by forestalling a false claim or allowing for voluntary resolution of a problem. If your company has run a hotline unsuccessfully and earned a poor reputation with employees, outsourcing may be the best option. A hotline that is not supported by management may prove to be an insurmountable problem for anyone who attempts to operate it. Your approach to hotline call intake will set the tone for your compliance program.

Hot Laboratories and Remote Handling

International Nuclear Information System (INIS)

Bart, G.; Blanc, J.Y.; Duwe, R.

2003-01-01

The European Working Group on ' Hot Laboratories and Remote Handling' is firmly established as the major contact forum for the nuclear R and D facilities at the European scale. The yearly plenary meetings intend to: - Exchange experience on analytical methods, their implementation in hot cells, the methodologies used and their application in nuclear research; - Share experience on common infrastructure exploitation matters such as remote handling techniques, safety features, QA-certification, waste handling; - Promote normalization and co-operation, e.g., by looking at mutual complementarities; - Prospect present and future demands from the nuclear industry and to draw strategic conclusions regarding further needs. The 41. plenary meeting was held in CEA Saclay from September 22 to 24, 2003 in the premises and with the technical support of the INSTN (National Institute for Nuclear Science and Technology). The Nuclear Energy Division of CEA sponsored it. The Saclay meeting was divided in three topical oral sessions covering: - Post irradiation examination: new analysis methods and methodologies, small specimen technology, programmes and results; - Hot laboratory infrastructure: decommissioning, refurbishment, waste, safety, nuclear transports; - Prospective research on materials for future applications: innovative fuels (Generation IV, HTR, transmutation, ADS), spallation source materials, and candidate materials for fusion reactor. A poster session was opened to transport companies and laboratory suppliers. The meeting addressed in three sessions the following items: Session 1 - Post Irradiation Examinations. Out of 12 papers (including 1 poster) 7 dealt with surface and solid state micro analysis, another one with an equally complex wet chemical instrumental analytical technique, while the other four papers (including the poster) presented new concepts for digital x-ray image analysis; Session 2 - Hot laboratory infrastructure (including waste theme) which was

14 CFR 26.49 - Compliance plan.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Compliance plan. 26.49 Section 26.49... Data for Repairs and Alterations § 26.49 Compliance plan. (a) Compliance plan. Except for applicants... January 11, 2008, each person identified in §§ 26.43, 26.45, and 26.47, must submit a compliance plan...

Explaining G20 and BRICS Compliance

Directory of Open Access Journals (Sweden)

Marina Larionova

2016-11-01

Full Text Available This article explores the internal and external factors influencing the compliance performance of the Group of 20 (G20 and the BRICS. The authors start with an overview of the G20 and BRICS compliance patterns using comparative data onthe number of commitments made by the two institutions, the level of institutional compliance, and distribution of commitments and compliance across issue areas. G20 compliance is traced since the leaders’ first 2008 summit in Washington. The BRICS compliance performance record includes data since the third stand alone summit in Sanya in 2011.The study then takes stock of compliance catalysts embedded in the summits’ discourse: priority placements, numerical targets, timelines, self-accountability pledges and mandates to implement and/or monitor implementation. The authors review trends in the use of catalysts in different years and issue areas and identify commonalities and differences.The analysis then turns to external causes of compliance and focuses on demand for collective actions and members’ collective power to respond and deliver on their pledges. Here the study explores whether the self-accountability mechanisms created by the institutions in response to the demand for effectiveness and legitimacy facilitate compliance.The article concludes by highlighting catalysts, causes of compliance and their combinations with the greatest power to encourage implementation, explaining trends in G20 and BRICS compliance performance. The data sets on G20 and BRICS differ in terms of scale. The G20 data set contains 1,511 commitments of which 114 have been monitored, and the BRICS data set contains 231 commitments of which 23 have been monitored.

Motivation for Compliance with Environmental Regulation

DEFF Research Database (Denmark)

Winter, Søren; May, Peter J.

2001-01-01

A combination of calculated, normative, and social motivations as well as awareness of rules and capacity to comply are thought to foster compliance with regulations. Hypotheses about these factors were tested with data concerning Danish farmers’ compliance with agro-environmental regulations....... Three key findings emerge: that farmers’ awareness of rules plays a critical role; that normative and social motivations are as influential as calculated motivations in enhancing compliance; and that inspectors’ enforcement style affects compliance differently from that posited in much of the literature...... compliance with social and environmental regulations....

Improved worst-case and liely accident definition in complex facilities for 40 CFR 68 compliance

International Nuclear Information System (INIS)

O'Kula, K.R., Taylor, Robert P., Jr; Hang, P.

1997-04-01

Many DOE facilities potentially subject to compliance with offsite consequence criteria under the 40 CFR 68 Risk Management Program house significant inventories of toxic and flammable chemicals. The accident progression event tree methodology is suggested as a useful technical basis to define Worst-Case and Alternative Release Scenarios in facilities performing operations beyond simple storage and/or having several barriers between the chemical hazard and the environment. For multiple chemical release scenarios, a chemical mixture methodology should be applied to conservatively define concentration isopleths. In some instances, the region requiring emergency response planning is larger under this approach than if chemicals are treated individually

Safety of Cargo Aircraft Handling Procedure

Directory of Open Access Journals (Sweden)

Daniel Hlavatý

2017-07-01

Full Text Available The aim of this paper is to get acquainted with the ways how to improve the safety management system during cargo aircraft handling. The first chapter is dedicated to general information about air cargo transportation. This includes the history or types of cargo aircraft handling, but also the means of handling. The second part is focused on detailed description of cargo aircraft handling, including a description of activities that are performed before and after handling. The following part of this paper covers a theoretical interpretation of safety, safety indicators and legislative provisions related to the safety of cargo aircraft handling. The fourth part of this paper analyzes the fault trees of events which might occur during handling. The factors found by this analysis are compared with safety reports of FedEx. Based on the comparison, there is a proposal on how to improve the safety management in this transportation company.

Sulfonylurea herbicides – methodological challenges in setting aquatic limit values

DEFF Research Database (Denmark)

Rosenkrantz, Rikke Tjørnhøj; Baun, Anders; Kusk, Kresten Ole

according to the EU Water Framework Directive, the resulting Water Quality Standards (WQSs) are below the analytical quantification limit, making it difficult to verify compliance with the limit values. However, several methodological concerns may be raised in relation to the very low effect concentrations...... and rimsulfuron. The following parameters were varied during testing: pH, exposure duration, temperature and light/dark cycle. Preliminary results show that a decrease in pH causes an increase in toxicity for all compounds. Exposure to a high concentration for 24 hours caused a reduction in growth rate, from...... for setting limit values for SUs or if more detailed information should be gained by taking methodological considerations into account....

Compliance with air quality regulations

International Nuclear Information System (INIS)

Steen, D.V.; Tackett, D.L.

1990-01-01

Due to the probable passage of Clean Air Act Amendments in 1990, electric utilities throughout the United States are faced with numerous choices to comply with the new acid rain regulations, expected in 1991. The choice of a compliance plan is not a simple task. Every compliance option will be costly. At Ohio Edison, deliberations are quite naturally influenced by past compliance with air quality regulations. This paper discusses compliance with air quality regulations in the 1970's, clean coal technologies and advanced scrubbers, and compliance with air quality regulations in 1995 - 2000. The choice of a compliance strategy for many utilities will involve serving customer loads through some combination of scrubbers, clean coal technologies, fuel switching, fuel blending, redispatch of units, and emissions trading. Whatever the final choice, it must be economic while providing sufficient flexibility to accommodate the critical uncertainties of load growth, state regulatory treatment, markets for emission allowances, advancements in control technologies, additional federal requirements for air emissions, equipment outages and fuel supply disruptions.s

SRS ES ampersand H standards compliance program management plan

International Nuclear Information System (INIS)

Hearn, W.H.

1993-01-01

On March 8, 1990, the Defense Nuclear Facilities Safety Board (DNFSB) issued Recommendation 90-2 to the Secretary of Energy. This recommendation, based upon the DNFSB's initial review and evaluation of the content and implementation of standards relating to the design, construction, operations, and decommissioning of defense nuclear facilities of the Department of Energy (DOE), called for three actions: (1) identification of specific standards that apply to design, construction, operation and decommissioning of DOE facilities; (2) assessment of the adequacy of those standards for protecting public health and safety; and (3) determination of the extent to which they have and are being implemented. This document defines the elements of the SRS program required to support the HQ program in response to DNFSB Recommendation 90-2. The objective is to ensure a consistent approach for all sitewide ES and H Standards Compliance Program efforts that satisfied the intent of Recommendation 90-2 and the HQ 90-2 Implementation Plan in a cost-effective manner. The methodology and instructions for implementation of the SRS program are contained in the Standards Compliance Program Implementation Plan. The Management Plan shall be used in conjunction with the Implementation Plan

Regulatory Enforcement and Compliance

DEFF Research Database (Denmark)

May, Peter J.; Winter, Søren

1999-01-01

This study of municipal enforcement of agro-environmental regulations in Denmark provides an empirical understanding of how enforcement affects compliance. A key contribution is sorting out the relative influence of inspectors' different styles of enforcement and choices made by enforcement...... agencies. The latter are shown to be more important in bringing about compliance than are inspectors' enforcement styles. Municipal agencies are shown to increase compliance through the use of third parties, more frequent inspection, and setting priorities for inspection of major items. The findings about...

A road map for compliance training

International Nuclear Information System (INIS)

Miller, D.

1995-01-01

On April 6, 1990, the American Petroleum Institute (API) amended its bylaws to incorporate an environmental mission statement and 11 guiding environmental principles. The action renewed and reemphasized the industry's commitment to safe and environmentally sound operations. One of these principles deals specifically with safe plant operations: To operate their plants and facilities, and to handle their raw materials and products in a manner that protects the environment, and the safety and health of their employees and the public. This principle has particular relevance in the area of employee training and information transfer, where assurance of safe and environmentally sound operations start with a properly trained and informed workforce. Similarly, in 1988, the Chemical Manufacturers Association (CMA) adopted an initiative called Responsible Care reg-sign: A Public Commitment. The initiative commits member companies to improve performance in response to public concerns about the impact of chemicals on health, safety and environmental quality. The implementation of sound training programs will help achieve compliance with both API's and CMAs initiatives. Besides operations and maintenance skills training, however, Federally Mandated Training is an important issue facing the petroleum and chemical industry

340 Facility compliance assessment

International Nuclear Information System (INIS)

English, S.L.

1993-10-01

This study provides an environmental compliance evaluation of the RLWS and the RPS systems of the 340 Facility. The emphasis of the evaluation centers on compliance with WAC requirements for hazardous and mixed waste facilities, federal regulations, and Westinghouse Hanford Company (WHC) requirements pertinent to the operation of the 340 Facility. The 340 Facility is not covered under either an interim status Part A permit or a RCRA Part B permit. The detailed discussion of compliance deficiencies are summarized in Section 2.0. This includes items of significance that require action to ensure facility compliance with WAC, federal regulations, and WHC requirements. Outstanding issues exist for radioactive airborne effluent sampling and monitoring, radioactive liquid effluent sampling and monitoring, non-radioactive liquid effluent sampling and monitoring, less than 90 day waste storage tanks, and requirements for a permitted facility

Ergonomics and patient handling.

Science.gov (United States)

McCoskey, Kelsey L

2007-11-01

This study aimed to describe patient-handling demands in inpatient units during a 24-hour period at a military health care facility. A 1-day total population survey described the diverse nature and impact of patient-handling tasks relative to a variety of nursing care units, patient characteristics, and transfer equipment. Productivity baselines were established based on patient dependency, physical exertion, type of transfer, and time spent performing the transfer. Descriptions of the physiological effect of transfers on staff based on patient, transfer, and staff characteristics were developed. Nursing staff response to surveys demonstrated how patient-handling demands are impacted by the staff's physical exertion and level of patient dependency. The findings of this study describe the types of transfers occurring in these inpatient units and the physical exertion and time requirements for these transfers. This description may guide selection of the most appropriate and cost-effective patient-handling equipment required for specific units and patients.

Equipment for the handling of thorium materials

International Nuclear Information System (INIS)

Heisler, S.W. Jr.; Mihalovich, G.S.

1988-01-01

The Feed Materials Production Center (FMPC) is the United States Department of Energy's storage facility for thorium. FMPC thorium handling and overpacking projects ensure the continued safe handling and storage of the thorium inventory until final disposition of the materials is determined and implemented. The handling and overpacking of the thorium materials requires the design of a system that utilizes remote handling and overpacking equipment not currently utilized at the FMPC in the handling of uranium materials. The use of remote equipment significantly reduces radiation exposure to personnel during the handling and overpacking efforts. The design system combines existing technologies from the nuclear industry, the materials processing and handling industry and the mining industry. The designed system consists of a modified fork lift truck for the transport of thorium containers, automated equipment for material identification and inventory control, and remote handling and overpacking equipment for material identification and inventory control, and remote handling and overpacking equipment for repackaging of the thorium materials

Contact-Handled Transuranic Waste Acceptance Criteria for the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

2005-01-01

The purpose of this document is to summarize the waste acceptance criteria applicable to the transportation, storage, and disposal of contact-handled transuranic (CH-TRU) waste at the Waste Isolation Pilot Plant (WIPP). These criteria serve as the U.S. Department of Energy's (DOE) primary directive for ensuring that CH-TRU waste is managed and disposed of in a manner that protects human health and safety and the environment.The authorization basis of WIPP for the disposal of CH-TRU waste includes the U.S.Department of Energy National Security and Military Applications of Nuclear EnergyAuthorization Act of 1980 (reference 1) and the WIPP Land Withdrawal Act (LWA;reference 2). Included in this document are the requirements and associated criteriaimposed by these acts and the Resource Conservation and Recovery Act (RCRA,reference 3), as amended, on the CH-TRU waste destined for disposal at WIPP.|The DOE TRU waste sites must certify CH-TRU waste payload containers to thecontact-handled waste acceptance criteria (CH-WAC) identified in this document. Asshown in figure 1.0, the flow-down of applicable requirements to the CH-WAC istraceable to several higher-tier documents, including the WIPP operational safetyrequirements derived from the WIPP CH Documented Safety Analysis (CH-DSA;reference 4), the transportation requirements for CH-TRU wastes derived from theTransuranic Package Transporter-Model II (TRUPACT-II) and HalfPACT Certificates ofCompliance (references 5 and 5a), the WIPP LWA (reference 2), the WIPP HazardousWaste Facility Permit (reference 6), and the U.S. Environmental Protection Agency(EPA) Compliance Certification Decision and approval for PCB disposal (references 7,34, 35, 36, and 37). The solid arrows shown in figure 1.0 represent the flow-down of allapplicable payload container-based requirements. The two dotted arrows shown infigure 1.0 represent the flow-down of summary level requirements only; i.e., the sitesmust reference the regulatory source

Contact-Handled Transuranic Waste Acceptance Criteria for the Waste Isolation Pilot Plant

Energy Technology Data Exchange (ETDEWEB)

Washington TRU Solutions LLC

2005-12-29

The purpose of this document is to summarize the waste acceptance criteria applicable to the transportation, storage, and disposal of contact-handled transuranic (CH-TRU) waste at the Waste Isolation Pilot Plant (WIPP). These criteria serve as the U.S. Department of Energy's (DOE) primary directive for ensuring that CH-TRU waste is managed and disposed of in a manner that protects human health and safety and the environment.The authorization basis of WIPP for the disposal of CH-TRU waste includes the U.S.Department of Energy National Security and Military Applications of Nuclear EnergyAuthorization Act of 1980 (reference 1) and the WIPP Land Withdrawal Act (LWA;reference 2). Included in this document are the requirements and associated criteriaimposed by these acts and the Resource Conservation and Recovery Act (RCRA,reference 3), as amended, on the CH-TRU waste destined for disposal at WIPP.|The DOE TRU waste sites must certify CH-TRU waste payload containers to thecontact-handled waste acceptance criteria (CH-WAC) identified in this document. Asshown in figure 1.0, the flow-down of applicable requirements to the CH-WAC istraceable to several higher-tier documents, including the WIPP operational safetyrequirements derived from the WIPP CH Documented Safety Analysis (CH-DSA;reference 4), the transportation requirements for CH-TRU wastes derived from theTransuranic Package Transporter-Model II (TRUPACT-II) and HalfPACT Certificates ofCompliance (references 5 and 5a), the WIPP LWA (reference 2), the WIPP HazardousWaste Facility Permit (reference 6), and the U.S. Environmental Protection Agency(EPA) Compliance Certification Decision and approval for PCB disposal (references 7,34, 35, 36, and 37). The solid arrows shown in figure 1.0 represent the flow-down of allapplicable payload container-based requirements. The two dotted arrows shown infigure 1.0 represent the flow-down of summary level requirements only; i.e., the sitesmust reference the regulatory source

How to Handle Abuse

Science.gov (United States)

... Handle Abuse KidsHealth / For Kids / How to Handle Abuse What's in this article? Tell Right Away How Do You Know Something Is Abuse? ... babysitter, teacher, coach, or a bigger kid. Child abuse can happen anywhere — at ... building. Tell Right Away A kid who is being seriously hurt ...

340 Waste handling Facility Hazard Categorization and Safety Analysis

International Nuclear Information System (INIS)

Rodovsky, T.J.

2010-01-01

The analysis presented in this document provides the basis for categorizing the facility as less than Hazard Category 3. The final hazard categorization for the deactivated 340 Waste Handling Facility (340 Facility) is presented in this document. This hazard categorization was prepared in accordance with DOE-STD-1 027-92, Change Notice 1, Hazard Categorization and Accident Analysis Techniques for Compliance with Doe Order 5480.23, Nuclear Safety Analysis Reports. The analysis presented in this document provides the basis for categorizing the facility as less than Hazard Category (HC) 3. Routine nuclear waste receiving, storage, handling, and shipping operations at the 340 Facility have been deactivated, however, the facility contains a small amount of radioactive liquid and/or dry saltcake in two underground vault tanks. A seismic event and hydrogen deflagration were selected as bounding accidents. The generation of hydrogen in the vault tanks without active ventilation was determined to achieve a steady state volume of 0.33%, which is significantly less than the lower flammability limit of 4%. Therefore, a hydrogen deflagration is not possible in these tanks. The unmitigated release from a seismic event was used to categorize the facility consistent with the process defined in Nuclear Safety Technical Position (NSTP) 2002-2. The final sum-of-fractions calculation concluded that the facility is less than HC 3. The analysis did not identify any required engineered controls or design features. The Administrative Controls that were derived from the analysis are: (1) radiological inventory control, (2) facility change control, and (3) Safety Management Programs (SMPs). The facility configuration and radiological inventory shall be controlled to ensure that the assumptions in the analysis remain valid. The facility commitment to SMPs protects the integrity of the facility and environment by ensuring training, emergency response, and radiation protection. The full scale

Waste Handling Building Conceptual Study

International Nuclear Information System (INIS)

G.W. Rowe

2000-01-01

The objective of the ''Waste Handling Building Conceptual Study'' is to develop proposed design requirements for the repository Waste Handling System in sufficient detail to allow the surface facility design to proceed to the License Application effort if the proposed requirements are approved by DOE. Proposed requirements were developed to further refine waste handling facility performance characteristics and design constraints with an emphasis on supporting modular construction, minimizing fuel inventory, and optimizing facility maintainability and dry handling operations. To meet this objective, this study attempts to provide an alternative design to the Site Recommendation design that is flexible, simple, reliable, and can be constructed in phases. The design concept will be input to the ''Modular Design/Construction and Operation Options Report'', which will address the overall program objectives and direction, including options and issues associated with transportation, the subsurface facility, and Total System Life Cycle Cost. This study (herein) is limited to the Waste Handling System and associated fuel staging system

Study and Handling Methods of Power IGBT Module Failures in Power Electronic Converter Systems

DEFF Research Database (Denmark)

Choi, Uimin; Blaabjerg, Frede; Lee, Kyo-Beum

2015-01-01

Power electronics plays an important role in a wide range of applications in order to achieve high efficiency and performance. Increasing efforts are being made to improve the reliability of power electronics systems to ensure compliance with more stringent constraints on cost, safety......, and availability in different applications. This paper presents an overview of the major failure mechanisms of IGBT modules and their handling methods in power converter systems improving reliability. The major failure mechanisms of IGBT modules are presented first, and methods for predicting lifetime...... and estimating the junction temperature of IGBT modules are then discussed. Subsequently, different methods for detecting open- and short-circuit faults are presented. Finally, fault-tolerant strategies for improving the reliability of power electronic systems under field operation are explained and compared...

Aspects of osseous, peritoneal and renal handling of bisphosphonate during peritoneal dialysis: a methodological study

DEFF Research Database (Denmark)

Joffe, P; Henriksen, Jens Henrik

1996-01-01

to continuous ambulatory peritoneal dialysis (CAPD). The aims were: to assess the kinetics of 99m-technetium MBP (99mTc-MBP) in CAPD, and to evaluate the correctness of the assumption that the peritoneal and renal clearances of 99mTc-MBP equal the total plasma clearance of 51-chromium ethylenediamine tetra......Tc-MBP equal the clearances of 51Cr-EDTA is correct from a clinical point of view. We found that the uptake of the tracers in soft tissue and the renal handling of 51Cr-EDTA and 99mTc-MBP are also similar. The differences between the clearance values for 51Cr-EDTA and 99mTc-MBP may be explained...

Identification of factors involved in medication compliance: incorrect inhaler technique of asthma treatment leads to poor compliance

Directory of Open Access Journals (Sweden)

Darbà J

2016-02-01

Full Text Available Josep Darbà,1 Gabriela Ramírez,2 Antoni Sicras,3 Laura García-Bujalance,4 Saku Torvinen,5 Rainel Sánchez-de la Rosa6 1Department of Economics, Universitat de Barcelona, 2BCN Health Economics & Outcomes Research S.L., 3Department of Planning, Badalona Serveis Assistencials S.A., Barcelona, 4Market Access Department, Teva Pharmaceutical, Madrid, Spain; 5Market Access Department, Teva Pharmaceuticals Europe BV, Amsterdam, the Netherlands; 6Medical Department, Teva Pharmaceutical, Madrid, Spain Objective: To identify the impact of delivery device of inhaled corticosteroids and long-acting β2-agonist (ICS/LABA on asthma medication compliance, and investigate other factors associated with compliance. Materials and methods: We conducted a retrospective and multicenter study based on a review of medical registries of asthmatic patients treated with ICS/LABA combinations (n=2,213 whose medical devices were either dry powder inhalers (DPIs, such as Accuhaler®, Turbuhaler®, and NEXThaler® or pressurized metered-dose inhalers (pMDI. Medication compliance included persistence outcomes through 18 months and medication possession ratios. Data on potential confounders of treatment compliance such as asthma exacerbations, comorbidities, demographic characteristics, and health care resource utilization were also explored. Results: The probability of asthma medication compliance in case of DPIs was lower compared to pMDIs, which suggests that inhaler devices influence inhalation therapies. There were additional confounding factors that were considered as explanatory variables of compliance. A worse measure of airflow obstruction (forced expiration volume in 1 second, comorbidities and general practitioner (GP consultations more than once per month decreased the probability of compliance. Within comorbidities, alcoholism was positively associated with compliance. Patients of 29–39, 40–50, and 51–61 age groups or suffering from more than two

Compliance and Enforcement Actions (CEA) -

Data.gov (United States)

Department of Transportation — Compliance and Enforcement Actions application provides process assistance / improvements for conducting investigation and enforcement activities. The Compliance and...

Food safety knowledge, attitude, and practice toward compliance with abattoir laws among the abattoir workers in Malaysia.

Science.gov (United States)

Abdullahi, Auwalu; Hassan, Azmi; Kadarman, Norizhar; Saleh, Ahmadu; Baraya, Yusha'u Shu'aibu; Lua, Pei Lin

2016-01-01

Foodborne diseases are common in the developing countries due to the predominant poor food handling and sanitation practices, particularly as a result of inadequate food safety laws, weak regulatory structures, and inadequate funding as well as a lack of appropriate education for food-handlers. The most frequently involved foods in disease outbreaks are of animal origin. However, in spite of the adequate legislation and laws governing the abattoir operation in Malaysia, compliance with food safety requirements during meat processing and waste disposal is inadequate. Therefore, the present study was designed to assess the food safety knowledge, attitude, and practice toward compliance with abattoir laws among the workers in Terengganu, Malaysia. A cross-sectional survey was conducted using simple random sampling technique in the six districts of Terengganu: two districts were used for the pilot study and the remaining four were used for the main study. One hundred sixty-five abattoir workers from the selected districts were interviewed using a structured questionnaire. The mean and standard deviation of knowledge, attitude, and practice scores of the workers were 6.02 and 1.954, 45.16 and 4.496, and 18.03 and 3.186, respectively. The majority of the workers (38.8%) had a low level of knowledge and 91.7% had a positive attitude, while 77.7% had a good practice of compliance. Sex had a significant association with the level of knowledge (P<0.001) and practice (P=0.044) among the workers. The females had a higher level of knowledge than the males, while the males had a better practice of compliance than females. Similarly, knowledge also had a significant (P=0.009) association with the level of practice toward compliance with abattoir laws among the workers. The abattoir workers had a positive attitude and good practice, but a low level of knowledge toward compliance with the abattoir laws. Therefore, public awareness, workshops, and seminars relevant to the abattoir

Food safety knowledge, attitude, and practice toward compliance with abattoir laws among the abattoir workers in Malaysia

Science.gov (United States)

Abdullahi, Auwalu; Hassan, Azmi; Kadarman, Norizhar; Saleh, Ahmadu; Baraya, Yusha’u Shu’aibu; Lua, Pei Lin

2016-01-01

Purpose Foodborne diseases are common in the developing countries due to the predominant poor food handling and sanitation practices, particularly as a result of inadequate food safety laws, weak regulatory structures, and inadequate funding as well as a lack of appropriate education for food-handlers. The most frequently involved foods in disease outbreaks are of animal origin. However, in spite of the adequate legislation and laws governing the abattoir operation in Malaysia, compliance with food safety requirements during meat processing and waste disposal is inadequate. Therefore, the present study was designed to assess the food safety knowledge, attitude, and practice toward compliance with abattoir laws among the workers in Terengganu, Malaysia. Materials and methods A cross-sectional survey was conducted using simple random sampling technique in the six districts of Terengganu: two districts were used for the pilot study and the remaining four were used for the main study. One hundred sixty-five abattoir workers from the selected districts were interviewed using a structured questionnaire. Results The mean and standard deviation of knowledge, attitude, and practice scores of the workers were 6.02 and 1.954, 45.16 and 4.496, and 18.03 and 3.186, respectively. The majority of the workers (38.8%) had a low level of knowledge and 91.7% had a positive attitude, while 77.7% had a good practice of compliance. Sex had a significant association with the level of knowledge (Plevel of knowledge than the males, while the males had a better practice of compliance than females. Similarly, knowledge also had a significant (P=0.009) association with the level of practice toward compliance with abattoir laws among the workers. Conclusion The abattoir workers had a positive attitude and good practice, but a low level of knowledge toward compliance with the abattoir laws. Therefore, public awareness, workshops, and seminars relevant to the abattoir operations should be

Strategisk compliance og regulering

DEFF Research Database (Denmark)

Kühn Pedersen, Mogens

2016-01-01

Denne artikel introducerer strategisk compliance og påpeger dens samspil med klassiske og nyere former for reguleringer i digital værdiskabelse. Konteksten er den digitale økonomi, som vokser frem imellem den materielle økonomis bærepiller: Virksomheder og markeder, men består af en helt ny...... materialitet, som er det digitale univers og dets modsvarighed i nye krav til compliance. Den nye materialitet stiller nye krav, hvad angår digitale processer og transaktioner. Klassisk regulering, som aktører ikke selv kan ændre, støder på egenregulering, hvor aktørerne selv opsætter regler for at skabe...... digital værdi. Dette kalder på strategisk compliance. Med digitalisering er strategisk compliance sat på dagsordnen i reguleringsdebatten. Vi hævder, at regulering og egenregulering kan komme til at virke komplementært i det post-industrielle, digitaliserede samfund....

SRV-automatic handling device

International Nuclear Information System (INIS)

Yamada, Koji

1987-01-01

Automatic handling device for the steam relief valves (SRV's) is developed in order to achieve a decrease in exposure of workers, increase in availability factor, improvement in reliability, improvement in safety of operation, and labor saving. A survey is made during a periodical inspection to examine the actual SVR handling operation. An SRV automatic handling device consists of four components: conveyor, armed conveyor, lifting machine, and control/monitoring system. The conveyor is so designed that the existing I-rail installed in the containment vessel can be used without any modification. This is employed for conveying an SRV along the rail. The armed conveyor, designed for a box rail, is used for an SRV installed away from the rail. By using the lifting machine, an SRV installed away from the I-rail is brought to a spot just below the rail so that the SRV can be transferred by the conveyor. The control/monitoring system consists of a control computer, operation panel, TV monitor and annunciator. The SRV handling device is operated by remote control from a control room. A trial equipment is constructed and performance/function testing is carried out using actual SRV's. As a result, is it shown that the SRV handling device requires only two operators to serve satisfactorily. The required time for removal and replacement of one SRV is about 10 minutes. (Nogami, K.)

Grain Handling and Storage.

Science.gov (United States)

Harris, Troy G.; Minor, John

This text for a secondary- or postecondary-level course in grain handling and storage contains ten chapters. Chapter titles are (1) Introduction to Grain Handling and Storage, (2) Elevator Safety, (3) Grain Grading and Seed Identification, (4) Moisture Control, (5) Insect and Rodent Control, (6) Grain Inventory Control, (7) Elevator Maintenance,…

TRANSPORT/HANDLING REQUESTS

CERN Multimedia

Groupe ST/HM

2002-01-01

A new EDH document entitled 'Transport/Handling Request' will be in operation as of Monday, 11th February 2002, when the corresponding icon will be accessible from the EDH desktop, together with the application instructions. This EDH form will replace the paper-format transport/handling request form for all activities involving the transport of equipment and materials. However, the paper form will still be used for all vehicle-hire requests. The introduction of the EDH transport/handling request form is accompanied by the establishment of the following time limits for the various services concerned: 24 hours for the removal of office items, 48 hours for the transport of heavy items (of up to 6 metric tons and of standard road width), 5 working days for a crane operation, extra-heavy transport operation or complete removal, 5 working days for all transport operations relating to LHC installation. ST/HM Group, Logistics Section Tel: 72672 - 72202

Motivation and compliance with intraoral elastics.

Science.gov (United States)

Veeroo, Helen J; Cunningham, Susan J; Newton, Jonathon Timothy; Travess, Helen C

2014-07-01

Intraoral elastics are commonly used in orthodontics and require regular changing to be effective. Unfortunately, poor compliance with elastics is often encountered, especially in adolescents. Intention for an action and its implementation can be improved using "if-then" plans that spell out when, where, and how a set goal, such as elastic wear, can be put into action. Our aim was to determine the effect of if-then plans on compliance with elastics. To identify common barriers to compliance with recommendations concerning elastic wear, semistructured interviews were carried out with 14 adolescent orthodontic patients wearing intraoral elastics full time. Emerging themes were used to develop if-then plans to improve compliance with elastic wear. A prospective pilot study assessed the effectiveness of if-then planning aimed at overcoming the identified barriers on compliance with elastic wear. Twelve participants were randomized equally into study and control groups; the study group received information about if-then planning. The participants were asked to collect used elastics, and counts of these were used to assess compliance. A wide range of motivational and volitional factors were described by the interviewed participants, including the perceived benefits of elastics, cues to remember, pain, eating, social situations, sports, loss of elastics, and breakages. Compliance with elastic wear was highly variable among patients. The study group returned more used elastics, suggesting increased compliance, but the difference was not significant. The use of if-then plans might improve compliance with elastic wear when compared with routine clinical instructions. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

[Insufficient medication compliance in Parkinson's disease].

Science.gov (United States)

Aerts, Marjolein B; van der Eijk, Martijn; Kramers, Kees; Bloem, Bastiaan R

2011-01-01

Medication compliance is generally suboptimal, particularly in patients with complex polypharmacy. This generic treatment problem is described here for Parkinson's disease (PD). We would expect patients with PD to have good medication compliance, since missed doses immediately result in worsening of symptoms. However, recent research has revealed that PD patients demonstrate poor medication compliance. Poor medication compliance is particularly undesirable for patients with PD because regular intake of medication is required for optimal treatment effect. Possible ways of improving medication compliance are pharmacotherapeutic measures and behavioural interventions. Modern methods of communication (text message reminders) and 'smart' pill dispensers may be beneficial, but the advantages of such interventions have not yet been scientifically studied.

Systematic review of patient handling activities starting in lying, sitting and standing positions.

Science.gov (United States)

Hignett, Sue

2003-03-01

Over the last 20 years a number of methods have been recommended in professional guidelines for moving patients. This review was undertaken as it was recognized that there was a need for clinical work involving handling patients (systems of work and equipment) to be based on scientific evidence. The aim of this paper is to report the methodology, search strategy and results relating to work involving the care, treatment and transfer of patients starting in lying, sitting and standing positions. An unusual philosophical stance has been taken by appraising studies within a study type rather than comparatively. This facilitated the inclusion of a wide range of study designs (quantitative and qualitative). A string search was run on eight databases and supplemented by other search strategies. A published checklist was selected and inter-rater reliability established before the main review commenced. A systematic process for inclusion, exclusion, appraisal, extraction and synthesis was undertaken. Thirty-two studies were included: nine for activities with the patient starting in a lying position and 23 for the sitting position. No studies were found with respect to patient handling activities starting in a standing position. These data were synthesized into evidence statements. The evidence statements support the use of hoists (for nonweight bearing patients), standaids, sliding sheets (double thickness rollers), lateral transfer boards, walking belts and adjustable height beds and baths. It is suggested that these items should constitute a minimum equipment list for any clinical environment where patient handling takes place on a regular basis. The lack of research relating to patient handling in standing is of particular concern and it is recommended that this area should be a high research priority to address concerns about patient handling in rehabilitation activities.

Therapeutic compliance of first line disease-modifying therapies in patients with multiple sclerosis. COMPLIANCE Study.

Science.gov (United States)

Saiz, A; Mora, S; Blanco, J

2015-05-01

Non-adherence to disease-modifying therapies (DMTs) in multiple sclerosis may be associated with reduced efficacy. We assessed compliance, the reasons for non-compliance, treatment satisfaction, and quality of life (QoL) of patients treated with first-line therapies. A cross-sectional, multicenter study was conducted that included relapsing multiple sclerosis patients. Compliance in the past month was assessed using Morisky-Green test. Seasonal compliance and reasons for non-compliance were assessed by an ad-hoc questionnaire. Treatment satisfaction and QoL were evaluated by means of TSQM and PRIMUS questionnaires. A total of 220 patients were evaluated (91% relapsing-remitting); the mean age was 39.1 years, 70% were female, and the average time under treatment was 5.4 years. Subcutaneous interferon (IFN) β-1b was used in 23% of the patients, intramuscular IFN β-1a in 21%, subcutaneous IFN β-1a in 37%, and with glatiramer acetate in 19%. The overall compliance was 75%, with no significant differences related to the therapy, and 81% did not report any seasonal variation. Compliant patients had significantly lower disability scores and time of diagnosis, and greater satisfaction with treatment and its effectiveness. Discomfort and flu-like symptoms were the most frequent reasons for non-compliance. The satisfaction and QoL were associated with less disability and number of therapeutic switches. The rate of compliance, satisfaction and QoL in multiple sclerosis patients under DMTs is high, especially for those newly diagnosed, less disabled, and with fewer therapeutic switches. Discomfort and flu-like symptoms associated with injected therapies significantly affect adherence. Copyright © 2013 Sociedad Española de Neurología. Published by Elsevier España, S.L.U. All rights reserved.

Extrinsic incentives and tax compliance

OpenAIRE

Sour, Laura; Gutiérrez Andrade, Miguel Ángel

2011-01-01

This paper models the impact of extrinsic incentives in a tax compliance model. It also provides experimental evidence that confirms the existence of a positive relationship between rewards and tax compliance. If individuals are audited, rewards for honest taxpayers are effective in increasing the level of tax compliance. These results are particularly relevant in countries where there is little respect for tax law since rewards can contribute to crowding in the intrinsic motivation to comply.

Cask system design guidance for robotic handling

International Nuclear Information System (INIS)

Griesmeyer, J.M.; Drotning, W.D.; Morimoto, A.K.; Bennett, P.C.

1990-10-01

Remote automated cask handling has the potential to reduce both the occupational exposure and the time required to process a nuclear waste transport cask at a handling facility. The ongoing Advanced Handling Technologies Project (AHTP) at Sandia National Laboratories is described. AHTP was initiated to explore the use of advanced robotic systems to perform cask handling operations at handling facilities for radioactive waste, and to provide guidance to cask designers regarding the impact of robotic handling on cask design. The proof-of-concept robotic systems developed in AHTP are intended to extrapolate from currently available commercial systems to the systems that will be available by the time that a repository would be open for operation. The project investigates those cask handling operations that would be performed at a nuclear waste repository facility during cask receiving and handling. The ongoing AHTP indicates that design guidance, rather than design specification, is appropriate, since the requirements for robotic handling do not place severe restrictions on cask design but rather focus on attention to detail and design for limited dexterity. The cask system design features that facilitate robotic handling operations are discussed, and results obtained from AHTP design and operation experience are summarized. The application of these design considerations is illustrated by discussion of the robot systems and their operation on cask feature mock-ups used in the AHTP project. 11 refs., 11 figs

Production management of window handles

Directory of Open Access Journals (Sweden)

Manuela Ingaldi

2014-12-01

Full Text Available In the chapter a company involved in the production of aluminum window and door handles was presented. The main customers of the company are primarily companies which produce PCV joinery and wholesalers supplying these companies. One chosen product from the research company - a single-arm pin-lift window handle - was described and its production process depicted technologically. The chapter also includes SWOT analysis conducted in the research company and the value stream of the single-arm pin-lift window handle.

Visual imagery and the user model applied to fuel handling at EBR-II

International Nuclear Information System (INIS)

Brown-VanHoozer, S.A.

1995-01-01

The material presented in this paper is based on two studies involving visual display designs and the user's perspective model of a system. The studies involved a methodology known as Neuro-Linguistic Programming (NLP), and its use in expanding design choices which included the ''comfort parameters'' and ''perspective reality'' of the user's model of the world. In developing visual displays for the EBR-II fuel handling system, the focus would be to incorporate the comfort parameters that overlap from each of the representation systems: visual, auditory and kinesthetic then incorporate the comfort parameters of the most prominent group of the population, and last, blend in the other two representational system comfort parameters. The focus of this informal study was to use the techniques of meta-modeling and synesthesia to develop a virtual environment that closely resembled the operator's perspective of the fuel handling system of Argonne's Experimental Breeder Reactor - II. An informal study was conducted using NLP as the behavioral model in a v reality (VR) setting

7 CFR 58.443 - Whey handling.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Whey handling. 58.443 Section 58.443 Agriculture... Procedures § 58.443 Whey handling. (a) Adequate sanitary facilities shall be provided for the handling of whey. If outside, necessary precautions shall be taken to minimize flies, insects and development of...

Environmental impact assessment for energy pathways: an integrated methodology

International Nuclear Information System (INIS)

Sommereux-Blanc, Isabelle

2010-01-01

This document presents the synthesis of my research work contributing to the development of an integrated methodology of environmental impact assessment for energy pathways. In the context of world globalization, environmental impact assessments issues are highly linked with the following questioning: Which environmental impacts? for which demand? at which location? at which temporal scale? My work is built upon the definition of a conceptual framework able to handle these issues and upon its progressive implementation. The integration of the spatial and temporal issues within the methodology are key elements. Fundamental cornerstones of this framework are presented along the DPSIR concept (Driving forces, Pressures, State, Impacts, Responses). They cover a comprehensive analysis of the limits and the relevance of life cycle analysis and the development of a geo-spatialized environmental performance approach for an electrical production pathway. Perspectives linked with the development of this integrated methodology are detailed for energy pathways. (author)

22 CFR 209.6 - Compliance information.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Compliance information. 209.6 Section 209.6... § 209.6 Compliance information. (a) Cooperation and assistance. The Administrator shall to the fullest... and accurate compliance reports at such times, and in such form and containing such information, as...

Explaining Consumer Safe Food Handling Through Behavior-Change Theories: A Systematic Review.

Science.gov (United States)

Young, Ian; Reimer, Danielle; Greig, Judy; Meldrum, Richard; Turgeon, Patricia; Waddell, Lisa

2017-11-01

Consumers often engage in unsafe food handling behaviors at home. Previous studies have investigated the ability of behavior-change theories to explain and predict these behaviors. The purpose of this review was to determine which theories are most consistently associated with consumers' safe food handling behaviors across the published literature. A standardized systematic review methodology was used, consisting of the following steps: comprehensive search strategy; relevance screening of identified references; confirmation of relevance and characterization of relevant articles; risk-of-bias assessment; data extraction; and descriptive analysis of study results. A total of 20 relevant studies were identified; they were mostly conducted in Australia (40%) and the United States (35%) and used a cross-sectional design (65%). Most studies targeted young adults (65%), and none focused on high-risk consumer groups. The outcomes of 70% of studies received high overall risk-of-bias ratings, largely due to a lack of control for confounding variables. The most commonly applied theory was the Theory of Planned Behavior (45% of studies), which, along with other investigated theories of behavior change, was frequently associated with consumer safe food handling behavioral intentions and behaviors. However, overall, there was wide variation in the specific constructs found to be significantly associated and in the percentage of variance explained in each outcome across studies. The results suggest that multiple theories of behavior change can help to explain consumer safe food handling behaviors and could be adopted to guide the development of future behavior-change interventions. In these contexts, theories should be appropriately selected and adapted to meet the needs of the specific target population and context of interest.

The USAID Environmental Compliance Database

Data.gov (United States)

US Agency for International Development — The Environmental Compliance Database is a record of environmental compliance submissions with their outcomes. Documents in the database can be found by visiting the...

Interventions for enhancing medication compliance/adherence with benefits in treatment outcomes

Directory of Open Access Journals (Sweden)

Hagen, Anja

2007-01-01

counseling in problem cases for diabetics, different family based interventions including repeated family counseling, education and "culturally modified family therapy" in patients with schizophrenia, repeated "compliance therapy" sessions for patients with acute psychosis. For other interventions the results should be viewed with more concern (because of the poor methodical quality of the underlying studies. The effect size of the interventions can not be estimated from the available data. From the available data, no reliable results can be provided concerning the cost-benefit relation of these strategies. Discussion: Many of the reported studies had a poor reporting and methodological quality. The reliability of the conclusions of the studies is restricted because of methodical shortcomings. Efficacy and cost estimates determined in the health economic studies are not transferable to the current situation in Germany. It has been discussed recently that the compliance or adherence enhancing interventions can restrict the autonomy and the privacy of the patients. Conclusions: In drug therapy some compliance or adherence enhancing interventions with concomitant positive effect on the treatment outcome may be used. The cost-benefit relation of these interventions is to be estimated. Using these interventions the patient’s autonomy and privacy are to be restricted as few as possible.

A lean Six Sigma team increases hand hygiene compliance and reduces hospital-acquired MRSA infections by 51%.

Science.gov (United States)

Carboneau, Clark; Benge, Eddie; Jaco, Mary T; Robinson, Mary

2010-01-01

A low hand hygiene compliance rate by healthcare workers increases hospital-acquired infections to patients. At Presbyterian Healthcare Services in Albuquerque, New Mexico a Lean Six Sigma team identified the reasons for noncompliance were multifaceted. The team followed the DMAIC process and completed the methodology in 12 months. They implemented multiple solutions in the three areas: Education, Culture, and Environment. Based on methicillin-resistant Staphylococcus aureus (MRSA) mortality research the team's results included an estimated 2.5 lives saved by reducing MRSA infections by 51%. Subsequently this 51% decrease in MRSA saved the hospital US$276,500. For those readers tasked with increasing hand hygiene compliance this article will provide the knowledge and insight needed to overcome multifaceted barriers to noncompliance.

Deliverable 4.1 Homogeneous LCA methodology agreed by NEPTUNE and INNOWATECH

DEFF Research Database (Denmark)

Larsen, Henrik Fred; Hauschild, Michael Zwicky; Wenzel, Henrik

2007-01-01

In order to do a life cycle assessment (LCA) of a waste water treatment technique, a system to handle the mapped inventory data and a life cycle impact assessment (LCIA) method/model is needed. Besides NEPTUNE, another EU-funded project has the same methodology need namely INNOWATECH (contract No....... 036882) running in parallel with NEPTUNE but focusing on industrial waste water. With the aim of facilitating cooperation between the two projects a common LCA methodology framework has been worked out and is described in the following. This methodology work has been done as a joint effort between...... NEPTUNE WP4 and INNOWATECH WP4 represented by the WP4 lead partner IVL. The aim of the co-operation is to establish common methodologies and/or LCA models and/or tools in order to achieve a homogenous approach in INNOWATECH and NEPTUNE. Further, the aim is to facilitate possibilities of data exchange...

Development of commercial robots for radwaste handling

International Nuclear Information System (INIS)

Colborn, K.A.

1988-01-01

The cost and dose burden associated with low level radwaste handling activities is a matter of increasing concern to the commercial nuclear power industry. This concern is evidenced by the fact that many utilities have begun to revaluate waste generation, handling, and disposal activities at their plants in an effort to improve their overall radwaste handling operations. This paper reports on the project Robots for Radwaste Handling, to identify the potential of robots to improve radwaste handling operations. The project has focussed on the potential of remote or automated technology to improve well defined, recognizable radwaste operations. The project focussed on repetitive, low skill level radwaste handling and decontamination tasks which involve significant radiation exposure

24 CFR 107.40 - Compliance meeting.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Compliance meeting. 107.40 Section... NONDISCRIMINATION AND EQUAL OPPORTUNITY IN HOUSING UNDER EXECUTIVE ORDER 11063 § 107.40 Compliance meeting. (a... allegedly in violation (respondent) shall be sent a Notice of Compliance Meeting and requested to attend a...

Preoperational checkout of the remote-handled transuranic waste handling at the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

1987-09-01

This plan describes the preoperational checkout for handling Remote-Handled Transuranic (RH-TRU) Wastes from their receipt at the Waste Isolation Pilot Plant (WIPP) to their emplacement underground. This plan identifies the handling operations to be performed, personnel groups responsible for executing these operations, and required equipment items. In addition, this plan describes the quality assurance that will be exercised throughout the checkout, and finally, it establishes criteria by which to measure the success of the checkout. 7 refs., 5 figs

Preference Handling for Artificial Intelligence

OpenAIRE

Goldsmith, Judy; University of Kentucky; Junker, Ulrich; ILOG

2009-01-01

This article explains the benefits of preferences for AI systems and draws a picture of current AI research on preference handling. It thus provides an introduction to the topics covered by this special issue on preference handling.

Religious Serpent Handling and Community Relations.

Science.gov (United States)

Williamson, W Paul; Hood, Ralph W

2015-01-01

Christian serpent handling sects of Appalachia comprise a community that has long been mischaracterized and marginalized by the larger communities surrounding them. To explore this dynamic, this article traces the emergence of serpent handling in Appalachia and the emergence of anti-serpent-handling state laws, which eventually failed to curb the practice, as local communities gave serpent handling groups support. We present two studies to consider for improving community relations with serpent handling sects. In study 1, we present data relating the incidence of reported serpent-bite deaths with the rise of anti-serpent-handling laws and their eventual abatement, based on increasing acceptance of serpent handlers by the larger community. Study 2 presents interview data on serpent bites and death that provide explanations for these events from the cultural and religious perspective. We conclude that first-hand knowledge about serpent handlers, and other marginalized groups, helps to lessen suspicion and allows them to be seen as not much different, which are tendencies that are important for promoting inter-community harmony.

24 CFR 108.25 - Compliance meeting.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Compliance meeting. 108.25 Section... COMPLIANCE PROCEDURES FOR AFFIRMATIVE FAIR HOUSING MARKETING § 108.25 Compliance meeting. (a) Scheduling meeting. If an applicant fails to comply with requirements under § 108.15 or § 108.20 or it appears that...

Safe handling of tritium

International Nuclear Information System (INIS)

1991-01-01

The main objective of this publication is to provide practical guidance and recommendations on operational radiation protection aspects related to the safe handling of tritium in laboratories, industrial-scale nuclear facilities such as heavy-water reactors, tritium removal plants and fission fuel reprocessing plants, and facilities for manufacturing commercial tritium-containing devices and radiochemicals. The requirements of nuclear fusion reactors are not addressed specifically, since there is as yet no tritium handling experience with them. However, much of the material covered is expected to be relevant to them as well. Annex III briefly addresses problems in the comparatively small-scale use of tritium at universities, medical research centres and similar establishments. However, the main subject of this publication is the handling of larger quantities of tritium. Operational aspects include designing for tritium safety, safe handling practice, the selection of tritium-compatible materials and equipment, exposure assessment, monitoring, contamination control and the design and use of personal protective equipment. This publication does not address the technologies involved in tritium control and cleanup of effluents, tritium removal, or immobilization and disposal of tritium wastes, nor does it address the environmental behaviour of tritium. Refs, figs and tabs

Patient compliance with exercise: different theoretical approaches to short-term and long-term compliance.

NARCIS (Netherlands)

Sluijs, E.M.; Knibbe, J.J.

1991-01-01

Compliance with exercise regimens is difficult to obtain as is compliance with other medical regimens. In analyzing noncompliance, two problems exist: (I) current theories only partly explain patients’ noncompliance; (2) health care providers seldom act according to the recommendations derived from

How Retailers Handle Complaint Management

DEFF Research Database (Denmark)

Hansen, Torben; Wilke, Ricky; Zaichkowsky, Judy

2009-01-01

This article fills a gap in the literature by providing insight about the handling of complaint management (CM) across a large cross section of retailers in the grocery, furniture, electronic and auto sectors. Determinants of retailers’ CM handling are investigated and insight is gained as to the......This article fills a gap in the literature by providing insight about the handling of complaint management (CM) across a large cross section of retailers in the grocery, furniture, electronic and auto sectors. Determinants of retailers’ CM handling are investigated and insight is gained...... as to the links between CM and redress of consumers’ complaints. The results suggest that retailers who attach large negative consequences to consumer dissatisfaction are more likely than other retailers to develop a positive strategic view on customer complaining, but at the same time an increase in perceived...

7 CFR 926.9 - Handle.

Science.gov (United States)

2010-01-01

... the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE DATA COLLECTION, REPORTING AND RECORDKEEPING REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.9 Handle. Handle...

Building Energy Efficiency in India: Compliance Evaluation of Energy Conservation Building Code

Energy Technology Data Exchange (ETDEWEB)

Yu, Sha; Evans, Meredydd; Delgado, Alison

2014-03-26

��s enactment, only two states and one territory out of 35 Indian states and union territories formally adopted ECBC and six additional states are in the legislative process of approving ECBC. There are several barriers that slow down the process. First, stakeholders, such as architects, developers, and state and local governments, lack awareness of building energy efficiency, and do not have enough capacity and resources to implement ECBC. Second, institution for implementing ECBC is not set up yet; ECBC is not included in local building by-laws or incorporated into the building permit process. Third, there is not a systematic approach to measuring and verifying compliance and energy savings, and thus the market does not have enough confidence in ECBC. Energy codes achieve energy savings only when projects comply with codes, yet only few countries measure compliance consistently and periodic checks often indicate poor compliance in many jurisdictions. China and the U.S. appear to be two countries with comprehensive systems in code enforcement and compliance The United States recently developed methodologies measuring compliance with building energy codes at the state level. China has an annual survey investigating code compliance rate at the design and construction stages in major cities. Like many developing countries, India has only recently begun implementing an energy code and would benefit from international experience on code compliance. In this paper, we examine lessons learned from the U.S. and China on compliance assessment and how India can apply these lessons to develop its own compliance evaluation approach. This paper also provides policy suggestions to national, state, and local governments to improve compliance and speed up ECBC implementation.

Architecture-based regulatory compliance argumentation

DEFF Research Database (Denmark)

Mihaylov, Boyan; Onea, Lucian; Hansen, Klaus Marius

2016-01-01

Standards and regulations are difficult to understand and map to software, which makes compliance with them challenging to argue for software products and development process. This is problematic since lack of compliance may lead to issues with security, safety, and even to economic sanctions....... An increasing number of applications (for example in healthcare) are expected to have to live up to regulatory requirements in the future, which will lead to more software development projects having to deal with such requirements. We present an approach that models regulations such that compliance arguments...... the approach on the migration of the telemedicine platform Net4Care to the cloud, where certain regulations (for example privacy) should be concerned. The approach has the potential to support simpler compliance argumentation with the eventual promise of safer and more secure applications....

The Strategic Nature of Compliance

DEFF Research Database (Denmark)

König, Thomas; Mäder, Lars Kai

2014-01-01

by the anticipated enforcement decision of the monitoring agency and whether this agency is responsive to the probability of enforcement success and the potential sanctioning costs produced by noncomplying implementers. Compared to other monitoring systems, the centralized monitoring system of the European Union (EU......This compliance study models correct and timely implementation of policies in a multilevel system as a strategic game between a central monitoring agency and multiple implementers and evaluates statistically the empirical implications of this model. We test whether compliance is determined......) is praised for exemplary effectiveness, but our findings reveal that the monitoring agency refrains from enforcing compliance when the probability of success is low, and the sanctioning costs are high. This results in a compliance deficit, even though the selective enforcement activities of the monitoring...

Developing Agent-Oriented Video Surveillance System through Agent-Oriented Methodology (AOM

Directory of Open Access Journals (Sweden)

Cheah Wai Shiang

2016-12-01

Full Text Available Agent-oriented methodology (AOM is a comprehensive and unified agent methodology for agent-oriented software development. Although AOM is claimed to be able to cope with a complex system development, it is still not yet determined up to what extent this may be true. Therefore, it is vital to conduct an investigation to validate this methodology. This paper presents the adoption of AOM in developing an agent-oriented video surveillance system (VSS. An intruder handling scenario is designed and implemented through AOM. AOM provides an alternative method to engineer a distributed security system in a systematic manner. It presents the security system at a holistic view; provides a better conceptualization of agent-oriented security system and supports rapid prototyping as well as simulation of video surveillance system.

Directory of certificates of compliance for radioactive materials packages. Certificates of compliance

International Nuclear Information System (INIS)

1979-10-01

This volume contains all Certificates of Compliance for radioactive material packages effective September 14, 1979. Purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance number is included at the back of each volume of the directory

42 CFR 124.503 - Compliance level.

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Compliance level. 124.503 Section 124.503 Public... Unable To Pay § 124.503 Compliance level. (a) Annual compliance level. Subject to the provisions of this... persons unable to pay if it provides for the fiscal year uncompensated services at a level not less than...

Remote handling at LAMPF

International Nuclear Information System (INIS)

Grisham, D.L.; Lambert, J.E.

1983-01-01

Experimental area A at the Clinton P. Anderson Meson Physics Facility (LAMPF) encompasses a large area. Presently there are four experimental target cells along the main proton beam line that have become highly radioactive, thus dictating that all maintenance be performed remotely. The Monitor remote handling system was developed to perform in situ maintenance at any location within area A. Due to the complexity of experimental systems and confined space, conventional remote handling methods based upon hot cell and/or hot bay concepts are not workable. Contrary to conventional remote handling which require special tooling for each specifically planned operation, the Monitor concept is aimed at providing a totally flexible system capable of remotely performing general mechanical and electrical maintenance operations using standard tools. The Monitor system is described

Risk aversion and institutional information disclosure on the European carbon market. A case-study of the 2006 compliance event

International Nuclear Information System (INIS)

Chevallier, Julien; Ielpo, Florian; Mercier, Ludovic

2009-01-01

This article evaluates the impact of the 2006 compliance event on changes in investors' risk aversion on the European carbon market using the newly available option prices dataset. Thus, we aim at capturing the specific event that occurred on April 2007 as the European Commission disclosed the 2006 verified emissions data. Following the methodology existing for stock indices, we recover empirically risk aversion adjustments on the period 2006-2007 by estimating first the risk-neutral distribution from option prices and second the actual distribution from futures on the European Climate Exchange. Our results show evidence of a dramatic change in the market perception of risk around the 2006 yearly compliance event that has not been assessed yet. (author)

A performance assessment methodology for low-level radioactive waste disposal

International Nuclear Information System (INIS)

Deering, L.R.; Kozak, M.W.

1990-01-01

To demonstrate compliance with the performance objectives governing protection of the general population in 10 CFR 61.41, applicants for land disposal of low-level radioactive waste are required to conduct a pathways analysis, or quantitative evaluation of radionuclide release, transport through environmental media, and dose to man. The Nuclear Regulatory Commission staff defined a strategy and initiated a project at Sandia National Laboratories to develop a methodology for independently evaluating an applicant's analysis of postclosure performance. This performance assessment methodology was developed in five stages: (1) identification of environmental pathways, (2) ranking, the significance of the pathways, (3) identification and integration of models for pathway analyses, (4) identification and selection of computer codes and techniques for the methodology, and (5) implementation of the codes and documentation of the methodology. The final methodology implements analytical and simple numerical solutions for source term, ground-water flow and transport, surface water transport, air transport, food chain, and dosimetry analyses, as well as more complex numerical solutions for multidimensional or transient analyses when more detailed assessments are needed. The capability to perform both simple and complex analyses is accomplished through modular modeling, which permits substitution of various models and codes to analyze system components

Electronic astronomical information handling and flexible publishing.

Science.gov (United States)

Heck, A.

The current dramatic evolution in information technology is bringing major modifications in the way scientists work and communicate. The concept of electronic information handling encompasses the diverse types of information, the different media, as well as the various communication methodologies and technologies. It ranges from the very collection of data until the final publication of results and sharing of knowledge. New problems and challenges result also from the new information culture, especially on legal, ethical, and educational grounds. Electronic publishing will have to diverge from an electronic version of contributions on paper and will be part of a more general flexible-publishing policy. The benefits of private publishing are questioned. The procedures for validating published material and for evaluating scientific activities will have to be adjusted too. Provision of electronic refereed information independently from commercial publishers in now feasible. Scientists and scientific institutions have now the possibility to run an efficient information server with validated (refereed) material without the help of a commercial publishers.

MRI of meniscal bucket-handle tears

Energy Technology Data Exchange (ETDEWEB)

Magee, T.H.; Hinson, G.W. [Menorah Medical Center, Overland Park, KS (United States). Dept. of Radiology

1998-09-01

A meniscal bucket-handle tear is a tear with an attached fragment displaced from the meniscus of the knee joint. Low sensitivity of MRI for detection of bucket-handle tears (64% as compared with arthroscopy) has been reported previously. We report increased sensitivity for detecting bucket-handle tears with the use of coronal short tau inversion recovery (STIR) images. Results. By using four criteria for diagnosis of meniscal bucket-handle tears, our overall sensitivity compared with arthroscopy was 93% (28 of 30 meniscal bucket-handle tears seen at arthroscopy were detected by MRI). The meniscal fragment was well visualized in all 28 cases on coronal STIR images. The double posterior cruciate ligament sign was seen in 8 of 30 cases, the flipped meniscus was seen in 10 of 30 cases and a fragment in the intercondylar notch was seen in 18 of 30 cases. (orig.)

Minimizing the carbon footprint of material handling equipment: Comparison of electric and LPG forklifts

Energy Technology Data Exchange (ETDEWEB)

Facchini, F.; Mummolo, G.; Mossa, G.; Digiesi, S.; Boenzi, F.; Verriello, R.

2016-07-01

Purpose: The aim of this study is to identify the best Material Handling Equipment (MHE) to minimize the carbon footprint of inbound logistic activities, based on the type of the warehouse (layout, facilities and order-picking strategy) as well as the weight of the loads to be handled. Design/methodology/approach: A model to select the best environmental MHE for inbound logistic activities has been developed. Environmental performance of the MHE has been evaluated in terms of carbon Footprint (CF). The model is tested with a tool adopting a VBA macro as well as a simulation software allowing the evaluation of energy and time required by the forklift in each phase of the material handling cycle: picking, sorting and storing of the items. Findings: Nowadays, it is not possible to identify ‘a priori’ a particular engine equipped forklift performing better than others under an environmental perspective. Consistently, the application of the developed model allows to identify the best MHE tailored to each case analyzed. Originality/value: This work gives a contribution to the disagreement between environmental performances of forklifts equipped with different engines. The developed model can be considered a valid support for decision makers to identify the best MHE minimizing the carbon footprint of inbound logistic activities.

Minimizing the carbon footprint of material handling equipment: Comparison of electric and LPG forklifts

International Nuclear Information System (INIS)

Facchini, F.; Mummolo, G.; Mossa, G.; Digiesi, S.; Boenzi, F.; Verriello, R.

2016-01-01

Purpose: The aim of this study is to identify the best Material Handling Equipment (MHE) to minimize the carbon footprint of inbound logistic activities, based on the type of the warehouse (layout, facilities and order-picking strategy) as well as the weight of the loads to be handled. Design/methodology/approach: A model to select the best environmental MHE for inbound logistic activities has been developed. Environmental performance of the MHE has been evaluated in terms of carbon Footprint (CF). The model is tested with a tool adopting a VBA macro as well as a simulation software allowing the evaluation of energy and time required by the forklift in each phase of the material handling cycle: picking, sorting and storing of the items. Findings: Nowadays, it is not possible to identify ‘a priori’ a particular engine equipped forklift performing better than others under an environmental perspective. Consistently, the application of the developed model allows to identify the best MHE tailored to each case analyzed. Originality/value: This work gives a contribution to the disagreement between environmental performances of forklifts equipped with different engines. The developed model can be considered a valid support for decision makers to identify the best MHE minimizing the carbon footprint of inbound logistic activities.

Minimizing the carbon footprint of material handling equipment: Comparison of electric and LPG forklifts

Directory of Open Access Journals (Sweden)

Francesco Facchini

2016-12-01

Full Text Available Purpose: The aim of this study is to identify the best Material Handling Equipment (MHE to minimize the carbon footprint of inbound logistic activities, based on the type of the warehouse (layout, facilities and order-picking strategy as well as the weight of the loads to be handled. Design/methodology/approach: A model to select the best environmental MHE for inbound logistic activities has been developed. Environmental performance of the MHE has been evaluated in terms of carbon Footprint (CF. The model is tested with a tool adopting a VBA macro as well as a simulation software allowing the evaluation of energy and time required by the forklift in each phase of the material handling cycle: picking, sorting and storing of the items. Findings: Nowadays, it is not possible to identify ‘a priori’ a particular engine equipped forklift performing better than others under an environmental perspective. Consistently, the application of the developed model allows to identify the best MHE tailored to each case analyzed.   Originality/value: This work gives a contribution to the disagreement between environmental performances of forklifts equipped with different engines. The developed model can be considered a valid support for decision makers to identify the best MHE minimizing the carbon footprint of inbound logistic activities.

Hybrid probabilistic and possibilistic safety assessment. Methodology and application

International Nuclear Information System (INIS)

Kato, Kazuyuki; Amano, Osamu; Ueda, Hiroyoshi; Ikeda, Takao; Yoshida, Hideji; Takase, Hiroyasu

2002-01-01

This paper presents a unified methodology to handle variability and ignorance by using probabilistic and possibilistic techniques respectively. The methodology has been applied to the safety assessment of geological disposal of high-level radioactive waste. Uncertainties associated with scenarios, models and parameters were defined in terms of fuzzy membership functions derived through a series of interviews to the experts, while variability was formulated by means of probability density functions (pdfs) based on available data sets. The exercise demonstrated the applicability of the new methodology and, in particular, its advantage in quantifying uncertainties based on expert opinion and in providing information on the dependence of assessment results on the level of conservatism. In addition, it was shown that sensitivity analysis can identify key parameters contributing to uncertainties associated with results of the overall assessment. The information mentioned above can be utilized to support decision-making and to guide the process of disposal system development and optimization of protection against potential exposure. (author)

Sophisticated fuel handling system evolved

International Nuclear Information System (INIS)

Ross, D.A.

1988-01-01

The control systems at Sellafield fuel handling plant are described. The requirements called for built-in diagnostic features as well as the ability to handle a large sequencing application. Speed was also important; responses better than 50ms were required. The control systems are used to automate operations within each of the three main process caves - two Magnox fuel decanners and an advanced gas-cooled reactor fuel dismantler. The fuel route within the fuel handling plant is illustrated and described. ASPIC (Automated Sequence Package for Industrial Control) which was developed as a controller for the plant processes is described. (U.K.)

A Design Methodology for Medical Processes

Science.gov (United States)

Bonacina, Stefano; Pozzi, Giuseppe; Pinciroli, Francesco; Marceglia, Sara

2016-01-01

Summary Background Healthcare processes, especially those belonging to the clinical domain, are acknowledged as complex and characterized by the dynamic nature of the diagnosis, the variability of the decisions made by experts driven by their experiences, the local constraints, the patient’s needs, the uncertainty of the patient’s response, and the indeterminacy of patient’s compliance to treatment. Also, the multiple actors involved in patient’s care need clear and transparent communication to ensure care coordination. Objectives In this paper, we propose a methodology to model healthcare processes in order to break out complexity and provide transparency. Methods The model is grounded on a set of requirements that make the healthcare domain unique with respect to other knowledge domains. The modeling methodology is based on three main phases: the study of the environmental context, the conceptual modeling, and the logical modeling. Results The proposed methodology was validated by applying it to the case study of the rehabilitation process of stroke patients in the specific setting of a specialized rehabilitation center. The resulting model was used to define the specifications of a software artifact for the digital administration and collection of assessment tests that was also implemented. Conclusions Despite being only an example, our case study showed the ability of process modeling to answer the actual needs in healthcare practices. Independently from the medical domain in which the modeling effort is done, the proposed methodology is useful to create high-quality models, and to detect and take into account relevant and tricky situations that can occur during process execution. PMID:27081415

A Design Methodology for Medical Processes.

Science.gov (United States)

Ferrante, Simona; Bonacina, Stefano; Pozzi, Giuseppe; Pinciroli, Francesco; Marceglia, Sara

2016-01-01

Healthcare processes, especially those belonging to the clinical domain, are acknowledged as complex and characterized by the dynamic nature of the diagnosis, the variability of the decisions made by experts driven by their experiences, the local constraints, the patient's needs, the uncertainty of the patient's response, and the indeterminacy of patient's compliance to treatment. Also, the multiple actors involved in patient's care need clear and transparent communication to ensure care coordination. In this paper, we propose a methodology to model healthcare processes in order to break out complexity and provide transparency. The model is grounded on a set of requirements that make the healthcare domain unique with respect to other knowledge domains. The modeling methodology is based on three main phases: the study of the environmental context, the conceptual modeling, and the logical modeling. The proposed methodology was validated by applying it to the case study of the rehabilitation process of stroke patients in the specific setting of a specialized rehabilitation center. The resulting model was used to define the specifications of a software artifact for the digital administration and collection of assessment tests that was also implemented. Despite being only an example, our case study showed the ability of process modeling to answer the actual needs in healthcare practices. Independently from the medical domain in which the modeling effort is done, the proposed methodology is useful to create high-quality models, and to detect and take into account relevant and tricky situations that can occur during process execution.

GENDER AND ETHNICITY DIFFERENCES IN TAX COMPLIANCE

Directory of Open Access Journals (Sweden)

Jeyapalan Kasipillai

2006-01-01

Full Text Available The purpose of this study is to investigate whether gender and ethnicity differences occur in relation to tax compliance attitude and behavior. Prior studies on tax compliance have focused little on gender as a predictor of compliance. In Malaysia, ethnic background of a taxpayer could be a major determinant of tax compliance. A personal interview approach is used to obtain information from taxpayers in urban towns. A t-test suggests that males and females were found to have similar compliant attitude. As for ethnicity, asimilar result was observed. Results of a regression analysis indicate that gender, academic qualification, and the person preparing tax return were statistically significant as determinants of non-compliant attitude. In terms of compliant behavior, a regression analysis revealed that "attitude towards non-compliance" and "receipt of cash income" were two significant explanatory variables of tax non-compliance behavior of understating income knowingly. The findings of this study are useful for policyimplications in identifying groups that require additional attention to increase voluntary tax compliance.

The natural angle between the hand and handle and the effect of handle orientation on wrist radial/ulnar deviation during maximal push exertions.

Science.gov (United States)

Young, Justin G; Lin, Jia-Hua; Chang, Chien-Chi; McGorry, Raymond W

2013-01-01

The purpose of this experiment was to quantify the natural angle between the hand and a handle, and to investigate three design factors: handle rotation, handle tilt and between-handle width on the natural angle as well as resultant wrist radial/ulnar deviation ('RUD') for pushing tasks. Photographs taken of the right upper limb of 31 participants (14 women and 17 men) performing maximal seated push exertions on different handles were analysed. Natural hand/handle angle and RUD were assessed. It was found that all of the three design factors significantly affected natural handle angle and wrist RUD, but participant gender did not. The natural angle between the hand and the cylindrical handle was 65 ± 7°. Wrist deviation was reduced for handles that were rotated 0° (horizontal) and at the narrow width (31 cm). Handles that were tilted forward 15° reduced radial deviation consistently (12-13°) across handle conditions. Manual materials handling (MMH) tasks involving pushing have been related to increased risk of musculoskeletal injury. This study shows that handle orientation influences hand and wrist posture during pushing, and suggests that the design of push handles on carts and other MMH aids can be improved by adjusting their orientation to fit the natural interface between the hand and handle.

Evolving the JET virtual reality system for delivering the JET EP2 shutdown remote handling tasks

Energy Technology Data Exchange (ETDEWEB)

Williams, Adrian, E-mail: adrian.williams@oxfordtechnologies.co.uk [Oxford Technologies Ltd., 7 Nuffield Way, Abingdon, Oxon, OX14 1RJ (United Kingdom); JET-EFDA, Culham Science Centre, Abingdon, OX14 3DB (United Kingdom); Sanders, Stephen [Oxford Technologies Ltd., 7 Nuffield Way, Abingdon, Oxon, OX14 1RJ (United Kingdom); JET-EFDA, Culham Science Centre, Abingdon, OX14 3DB (United Kingdom); Weder, Gerard [Tree-C Technology BV, Buys Ballotstraat 8, 6716 BL Ede (Netherlands); JET-EFDA, Culham Science Centre, Abingdon, OX14 3DB (United Kingdom); Bastow, Roger; Allan, Peter; Hazel, Stuart [CCFE, Culham Science Centre, Abingdon, OX14 3DB (United Kingdom); JET-EFDA, Culham Science Centre, Abingdon, OX14 3DB (United Kingdom)

2011-10-15

The quality, functionality and performance of the virtual reality (VR) system used at JET for preparation and implementation of remote handling (RH) operations has been progressively enhanced since its first use in the original JET remote handling shutdown in 1998. As preparation began for the JET EP2 (Enhanced Performance 2) shutdown it was recognised that the VR system being used was unable to cope with the increased functionality and the large number of 3D models needed to fully represent the JET in-vessel components and tooling planned for EP2. A bespoke VR software application was developed in collaboration with the OEM, which allowed enhancements to be made to the VR system to meet the requirements of JET remote handling in preparation for EP2. Performance improvements required to meet the challenges of EP2 could not be obtained from the development of the new VR software alone. New methodologies were also required to prepare source, CATIA models for use in the VR using a collection of 3D software packages. In collaboration with the JET drawing office, techniques were developed within CATIA using polygon reduction tools to reduce model size, while retaining surface detail at required user limits. This paper will discuss how these developments have played an essential part in facilitating EP2 remote handling task development and examine their impact during the EP2 shutdown.

Evolving the JET virtual reality system for delivering the JET EP2 shutdown remote handling tasks

International Nuclear Information System (INIS)

Williams, Adrian; Sanders, Stephen; Weder, Gerard; Bastow, Roger; Allan, Peter; Hazel, Stuart

2011-01-01

The quality, functionality and performance of the virtual reality (VR) system used at JET for preparation and implementation of remote handling (RH) operations has been progressively enhanced since its first use in the original JET remote handling shutdown in 1998. As preparation began for the JET EP2 (Enhanced Performance 2) shutdown it was recognised that the VR system being used was unable to cope with the increased functionality and the large number of 3D models needed to fully represent the JET in-vessel components and tooling planned for EP2. A bespoke VR software application was developed in collaboration with the OEM, which allowed enhancements to be made to the VR system to meet the requirements of JET remote handling in preparation for EP2. Performance improvements required to meet the challenges of EP2 could not be obtained from the development of the new VR software alone. New methodologies were also required to prepare source, CATIA models for use in the VR using a collection of 3D software packages. In collaboration with the JET drawing office, techniques were developed within CATIA using polygon reduction tools to reduce model size, while retaining surface detail at required user limits. This paper will discuss how these developments have played an essential part in facilitating EP2 remote handling task development and examine their impact during the EP2 shutdown.

Orion Handling Qualities During ISS Rendezvous and Docking

Science.gov (United States)

Hart, Jeremy J.; Stephens, J. P.; Spehar, P.; Bilimoria, K.; Foster, C.; Gonzalex, R.; Sullivan, K.; Jackson, B.; Brazzel, J.; Hart, J.

2011-01-01

The Orion spacecraft was designed to rendezvous with multiple vehicles in low earth orbit (LEO) and beyond. To perform the required rendezvous and docking task, Orion must provide enough control authority to perform coarse translational maneuvers while maintaining precision to perform the delicate docking corrections. While Orion has autonomous docking capabilities, it is expected that final approach and docking operations with the International Space Station (ISS) will initially be performed in a manual mode. A series of evaluations was conducted by NASA and Lockheed Martin at the Johnson Space Center to determine the handling qualities (HQ) of the Orion spacecraft during different docking and rendezvous conditions using the Cooper-Harper scale. This paper will address the specifics of the handling qualities methodology, vehicle configuration, scenarios flown, data collection tools, and subject ratings and comments. The initial Orion HQ assessment examined Orion docking to the ISS. This scenario demonstrates the Translational Hand Controller (THC) handling qualities of Orion. During this initial assessment, two different scenarios were evaluated. The first was a nominal docking approach to a stable ISS, with Orion initializing with relative position dispersions and a closing rate of approximately 0.1 ft/sec. The second docking scenario was identical to the first, except the attitude motion of the ISS was modeled to simulate a stress case ( 1 degree deadband per axis and 0.01 deg/sec rate deadband per axis). For both scenarios, subjects started each run on final approach at a docking port-to-port range of 20 ft. Subjects used the THC in pulse mode with cues from the docking camera image, window views, and range and range rate data displayed on the Orion display units. As in the actual design, the attitude of the Orion vehicle was held by the automated flight control system at 0.5 degree deadband per axis. Several error sources were modeled including Reaction

State regulatory issues in acid rain compliance

International Nuclear Information System (INIS)

Solomon, B.D.; Brick, S.

1992-01-01

This article discusses the results of a US EPA workshop for state regulators and commission staff on acid rain compliance concerns. The topics of the article include the results of market-based emissions control, how emissions trading is expected to reduce emissions, public utility commissions approval of compliance plans, the purposes of the workshop, market information, accounting issues, regulatory process and utility planning, multi-state compliance planning, and relationship to other compliance issues

9 CFR 3.118 - Handling.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling. 3.118 Section 3.118 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment, and Transportation of Marine...

Safety measuring for sodium handling

Energy Technology Data Exchange (ETDEWEB)

Jeong, Ji Young; Jeong, K C; Kim, T J; Kim, B H; Choi, J H

2001-09-01

This is the report for the safety measures of sodium handling. These contents are prerequisites for the development of sodium technology and thus the workers participate in sodium handling and experiments have to know them perfectly. As an appendix, the relating parts of the laws are presented.

Diagnostic information in compliance checking

NARCIS (Netherlands)

Ramezani Taghiabadi, E.; Fahland, D.; Aalst, van der W.M.P.

2012-01-01

Compliance checking is gaining importance as today's organizations need to show that operational processes are executed in a controlled manner while satisfying predefined (legal) requirements. Deviations may be costly and expose the organization to severe risks. Compliance checking is of growing

A Perspective on Remote Handling Operations and Human Machine Interface for Remote Handling in Fusion

International Nuclear Information System (INIS)

Haist, B.; Hamilton, D.; Sanders, St.

2006-01-01

A large-scale fusion device presents many challenges to the remote handling operations team. This paper is based on unique operational experience at JET and gives a perspective on remote handling task development, logistics and resource management, as well as command, control and human-machine interface systems. Remote operations require an accurate perception of a dynamic environment, ideally providing the operators with the same unrestricted knowledge of the task scene as would be available if they were actually at the remote work location. Traditional camera based systems suffer from a limited number of viewpoints and also degrade quickly when exposed to high radiation. Virtual Reality and Augmented Reality software offer great assistance. The remote handling system required to maintain a tokamak requires a large number of different and complex pieces of equipment coordinating to perform a large array of tasks. The demands on the operator's skill in performing the tasks can escalate to a point where the efficiency and safety of operations are compromised. An operations guidance system designed to facilitate the planning, development, validation and execution of remote handling procedures is essential. Automatic planning of motion trajectories of remote handling equipment and the remote transfer of heavy loads will be routine and need to be reliable. This paper discusses the solutions developed at JET in these areas and also the trends in management and presentation of operational data as well as command, control and HMI technology development offering the potential to greatly assist remote handling in future fusion machines. (author)

Safety Analysis of 'Older/Aged' Handling and Transportation Equipment for Heavy Loads, Radioactive Waste and Materials in Accordance with German Nuclear Standards KTA 3902, 3903 and 3905

International Nuclear Information System (INIS)

Macias, P.; Prucker, E.; Stang, W.

2006-01-01

The purpose of this paper is to present a general safety analysis of important handling and transportation processes and their related equipment ('load chains' consisting of cranes, load-bearing equipment and load-attaching points). This project was arranged by the responsible Bavarian ministry for environment, health and consumer protection (StMUGV) in agreement with the power plant operators of all Bavarian nuclear power plants to work out potential safety improvements. The range of the equipment (e.g. reactor building, crane, refuelling machine, load-bearing equipment and load-attaching points) covers the handling and transportation of fuel elements (e. g. with fuel flasks), heavy loads (e.g. reactor pressure vessel closure head, shielding slabs) and radioactive materials and waste (e.g. waste flasks, control elements, fuel channels, structure elements). The handling equipment was subjected to a general safety analysis taking into account the ageing of the equipment and the progress of standards. Compliance with the current valid requirements of the state of science and technology as required by German Atomic Act and particularly of the nuclear safety KTA-standards (3902, 3903 and 3905) was examined. The higher protection aims 'safe handling and transportation of heavy loads and safe handling of radioactive materials and waste' of the whole analysis are to avoid a criticality accident, the release of radioactivity and inadmissible effects on important technical equipment and buildings. The scope of the analysis was to check whether these protection aims were fulfilled for all important technical handling and transportation processes. In particularly the design and manufacturing of the components and the regulations of the handling itself were examined. (authors)

Methodology on Investigating the Influences of Automated Material Handling System in Automotive Assembly Process

Science.gov (United States)

Saffar, Seha; Azni Jafar, Fairul; Jamaludin, Zamberi

2016-02-01

A case study was selected as a method to collect data in actual industry situation. The study aimed to assess the influences of automated material handling system in automotive industry by proposing a new design of integration system through simulation, and analyze the significant effect and influence of the system. The method approach tool will be CAD Software (Delmia & Quest). The process of preliminary data gathering in phase 1 will collect all data related from actual industry situation. It is expected to produce a guideline and limitation in designing a new integration system later. In phase 2, an idea or concept of design will be done by using 10 principles of design consideration for manufacturing. A full factorial design will be used as design of experiment in order to analyze the performance measured of the integration system with the current system in case study. From the result of the experiment, an ANOVA analysis will be done to study the performance measured. Thus, it is expected that influences can be seen from the improvement made in the system.

Investigating compliance with SME-friendly procurement policy

OpenAIRE

Flynn, Anthony

2016-01-01

This study investigates compliance with SME-friendly policy in public procurement. Two research questions guide the investigation. The first is the extent to which policy is being complied with. The results, which are based on 349 public buyer survey responses, reveal compliance to be moderate; indicated by a mean score of 14.54 out of 22 on the compliance index. The second question concerns the impact of institutional forces on policy compliance. A predictive model informed by institutional ...

Business Process Risk Management, Compliance and Internal Control: A Research Agenda

DEFF Research Database (Denmark)

Rikhardsson, Pall M.; Best, Peter; Green, Peter

(COSO). Based on an inductive methodological approach using literature review and interviews with managers engaged in risk management and internal control projects, this paper identifies three main areas that currently have management attention. These are business process risk management, compliance......Integration of risk management and management control is emerging as an important area in the wake of the Sarbanes-Oxley Act and with ongoing development of frameworks such as the Enterprise Risk Management (ERM) framework from the Committee of Sponsoring Organizations of the Treadway Commission...... management and internal control development. This paper discusses these areas and identifies a series of research questions regarding these critical issues....

Asthma, guides for diagnostic and handling

International Nuclear Information System (INIS)

Salgado, Carlos E; Caballero A, Andres S; Garcia G, Elizabeth

1999-01-01

The paper defines the asthma, includes topics as diagnostic, handling of the asthma, special situations as asthma and pregnancy, handling of the asthmatic patient's perioperatory and occupational asthma

Environmental sample banking-research and methodology

International Nuclear Information System (INIS)

Becker, D.A.

1976-01-01

The National Bureau of Standards (NBS), in cooperation with the Environment Protection Agency and the National Science Foundation, is engaged in a research program establishing methodology for environmental sample banking. This program is aimed toward evaluating the feasibility of a National Environment Specimen Bank (NESB). The capability for retrospective chemical analyses to evaluate changes in our environment would provide useful information. Much of this information could not be obtained using data from previously analyzed samples. However, to assure validity for these stored samples, they must be sampled, processed and stored under rigorously evaluated, controlled and documented conditions. The program currently under way in the NBS Analytical Chemistry Division has 3 main components. The first is an extension survey of available literature concerning problems of contamination, losses and storage. The components of interest include trace elements, pesticides, other trace organics (PCBs, plasticizers, etc.), radionuclides and microbiological species. The second component is an experimental evaluation of contamination and losses during sampling and sample handling. Of particular interest here is research into container cleaning methodology for trace elements, with respect to adsorption, desorption, leaching and partial dissolution by various sample matrices. The third component of this program is an evaluation of existing methodology for long-term sample storage

Remote-handled transuranic system assessment appendices. Volume 2

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-11-01

Volume 2 of this report contains six appendices to the report: Inventory and generation of remote-handled transuranic waste; Remote-handled transuranic waste site storage; Characterization of remote-handled transuranic waste; RH-TRU waste treatment alternatives system analysis; Packaging and transportation study; and Remote-handled transuranic waste disposal alternatives.

Remote-handled transuranic system assessment appendices. Volume 2

International Nuclear Information System (INIS)

1995-11-01

Volume 2 of this report contains six appendices to the report: Inventory and generation of remote-handled transuranic waste; Remote-handled transuranic waste site storage; Characterization of remote-handled transuranic waste; RH-TRU waste treatment alternatives system analysis; Packaging and transportation study; and Remote-handled transuranic waste disposal alternatives

[Drug compliance of patients on anticoagulant treatment].

Science.gov (United States)

Gadó, Klára; Kocsis, Eszter; Zelkó, Romána; Hankó, Balázs; Kovácsné Balogh, Judit; Forczig, Mónika; Domján, Gyula

2015-08-09

Despite several therapeutic possibilities the morbidity and mortality of thromboembolic disorders remain high. Improving drug compliance - i. e. keeping up the doctor's prescriptions - may be an effective tool to reach better results. To improve patients' compliance, the risk factors of non-compliance should be recognized. Among these patients' fear of adverse effects of drugs, their lack of knowledge about their illness and medication, forgetfulness, and other social, economic factors may be the most important. Furthermore, adherence may be worsened when the patient feels that the decision has been made over his/her head. Sustained medical adherence is important because anticoagulation may be a life-long treatment. The new oral anticoagulants make the matter of compliance to be current. These new type of drugs do not need regular laboratory monitoring and, therefore, compliance cannot be strictly followed. There are several studies concerning drug compliance to anticoagulant medications. Improvement of adherence is based on regular patient education after reviewing the factors of non-compliance, which needs teamwork with important roles of doctors, pharmacists, dietetics and nurses. Careful and accurate work of the participants of primary care might be complemented by the activity of anticoagulant clinics.

GENDER AND ETHNICITY DIFFERENCES IN TAX COMPLIANCE

OpenAIRE

Jeyapalan Kasipillai; Hijattulah Abdul Jabbar

2006-01-01

The purpose of this study is to investigate whether gender and ethnicity differences occur in relation to tax compliance attitude and behavior. Prior studies on tax compliance have focused little on gender as a predictor of compliance. In Malaysia, ethnic background of a taxpayer could be a major determinant of tax compliance. A personal interview approach is used to obtain information from taxpayers in urban towns. A t-test suggests that males and females were found to have similar compliant...

Type B Package Radioactive Material Contents Compliance

International Nuclear Information System (INIS)

HENSEL, STEVE

2006-01-01

Implementation of packaging and transportation requirements can be subdivided into three categories; contents compliance, packaging closure, and transportation or logistical compliance. This paper addresses the area of contents compliance within the context of regulations, DOE Orders, and appropriate standards. Common practices and current pitfalls are also discussed

Development of software for handling ship's pharmacy.

Science.gov (United States)

Nittari, Giulio; Peretti, Alessandro; Sibilio, Fabio; Ioannidis, Nicholas; Amenta, Francesco

2016-01-01

Ships are required to carry a given amount of medicinal products and medications depending on the flag and the type of vessel. These medicines are stored in the so called ship's "medicine chest" or more properly - a ship pharmacy. Owing to the progress of medical sciences and to the increase in the mean age of seafarers employed on board ships, the number of pharmaceutical products and medical devices required by regulations to be carried on board ships is increasing. This may make handling of the ship's medicine chest a problem primarily on large ships sailing on intercontinental routes due to the difficulty in identifying the correspondence between medicines obtained abroad with those available at the national market. To minimise these problems a tool named Pharmacy Ship (acronym: PARSI) has been developed. The application PARSI is based on a database containing the information about medicines and medical devices required by different countries regulations. In the first application the system was standardised to comply with the Italian regulations issued on the 1st October, 2015 which entered into force on the 18 January 2016. Thanks to PARSI it was possible to standardize the inventory procedures, facilitate the work of maritime health authorities and make it easier for the crew, not professional in the field, to handle the 'medicine chest' correctly by automating the procedures for medicines management. As far as we know there are no other similar tools available at the moment. The application of the software, as well as the automation of different activities, currently carried out manually, will help manage (qualitatively and quantitatively) the ship's pharmacy. The system developed in this study has proved to be an effective tool which serves to guarantee the compliance of the ship pharmacy with regulations of the flag state in terms of medicinal products and medications. Sharing the system with the Telemedical Maritime Assistance Service may result in

DDOS ATTACK DETECTION SIMULATION AND HANDLING MECHANISM

Directory of Open Access Journals (Sweden)

Ahmad Sanmorino

2013-11-01

Full Text Available In this study we discuss how to handle DDoS attack that coming from the attacker by using detection method and handling mechanism. Detection perform by comparing number of packets and number of flow. Whereas handling mechanism perform by limiting or drop the packets that detected as a DDoS attack. The study begins with simulation on real network, which aims to get the real traffic data. Then, dump traffic data obtained from the simulation used for detection method on our prototype system called DASHM (DDoS Attack Simulation and Handling Mechanism. From the result of experiment that has been conducted, the proposed method successfully detect DDoS attack and handle the incoming packet sent by attacker.

Mobile Source Emissions Regulatory Compliance Data

Data.gov (United States)

U.S. Environmental Protection Agency — The Engine and Vehicle Compliance Certification and Fuel Economy Inventory contains measured emissions and fuel economy compliance information for all types of...

Visual imagery and the user model applied to fuel handling at EBR-II

Energy Technology Data Exchange (ETDEWEB)

Brown-VanHoozer, S.A.

1995-06-01

The material presented in this paper is based on two studies involving visual display designs and the user`s perspective model of a system. The studies involved a methodology known as Neuro-Linguistic Programming (NLP), and its use in expanding design choices which included the ``comfort parameters`` and ``perspective reality`` of the user`s model of the world. In developing visual displays for the EBR-II fuel handling system, the focus would be to incorporate the comfort parameters that overlap from each of the representation systems: visual, auditory and kinesthetic then incorporate the comfort parameters of the most prominent group of the population, and last, blend in the other two representational system comfort parameters. The focus of this informal study was to use the techniques of meta-modeling and synesthesia to develop a virtual environment that closely resembled the operator`s perspective of the fuel handling system of Argonne`s Experimental Breeder Reactor - II. An informal study was conducted using NLP as the behavioral model in a v reality (VR) setting.

Ergonomics of disposable handles for minimally invasive surgery.

Science.gov (United States)

Büchel, D; Mårvik, R; Hallabrin, B; Matern, U

2010-05-01

The ergonomic deficiencies of currently available minimally invasive surgery (MIS) instrument handles have been addressed in many studies. In this study, a new ergonomic pistol handle concept, realized as a prototype, and two disposable ring handles were investigated according to ergonomic properties set by new European standards. In this study, 25 volunteers performed four practical tasks to evaluate the ergonomics of the handles used in standard operating procedures (e.g., measuring a suture and cutting to length, precise maneuvering and targeting, and dissection of a gallbladder). Moreover, 20 participants underwent electromyography (EMG) tests to measure the muscle strain they experienced while carrying out the basic functions (grasp, rotate, and maneuver) in the x, y, and z axes. The data measured included the number of errors, the time required for task completion, perception of pressure areas, and EMG data. The values for usability in the test were effectiveness, efficiency, and user satisfaction. Surveys relating to the subjective rating were completed after each task for each of the three handles tested. Each handle except the new prototype caused pressure areas and pain. Extreme differences in muscle strain could not be observed for any of the three handles. Experienced surgeons worked more quickly with the prototype when measuring and cutting a suture (approximately 20%) and during precise maneuvering and targeting (approximately 20%). On the other hand, they completed the dissection task faster with the handle manufactured by Ethicon. Fewer errors were made with the prototype in dissection of the gallbladder. In contrast to the handles available on the market, the prototype was always rated as positive by the volunteers in the subjective surveys. None of the handles could fulfil all of the requirements with top scores. Each handle had its advantages and disadvantages. In contrast to the ring handles, the volunteers could fulfil most of the tasks more

How Much Can Non-industry Standard Measurement Methodologies Benefit Methane Reduction Programs?

Science.gov (United States)

Risk, D. A.; O'Connell, L.; Atherton, E.

2017-12-01

In recent years, energy sector methane emissions have been recorded in large part by applying modern non-industry-standard techniques. Industry may lack the regulatory flexibility to use such techniques, or in some cases may not understand the possible associated economic advantage. As progressive jurisdictions move from estimation and towards routine measurement, the research community should provide guidance to help regulators and companies measure more effectively, and economically if possible. In this study, we outline a modelling experiment in which we explore the integration of non-industry-standard measurement techniques as part of a generalized compliance measurement program. The study was not intended to be exhaustive, or to recommend particular combinations, but instead to explore the inter-relationships between methodologies, development type, compliance practice. We first defined the role, applicable scale, detection limits, working distances, and approximate deployment cost of several measurement methodologies. We then considered a variety of development types differing mainly in footprint, density, and emissions "profile". Using a Monte Carlo approach, we evaluated the effect of these various factors on the cost and confidence of the compliance measurement program. We found that when added individually, some of the research techniques were indeed able to deliver an improvement in cost and/or confidence when used alongside industry-standard Optical Gas Imaging. When applied in combination, the ideal fraction of each measurement technique depended on development type, emission profile, and whether confidence or cost was more important. Results suggest that measurement cost and confidence could be improved if energy companies exploited a wider range of measurement techniques, and in a manner tailored to each development. In the short-term, combining clear scientific guidance with economic information could benefit immediate mitigation efforts over

Radiological safety aspects of handling plutonium

International Nuclear Information System (INIS)

Sundararajan, A.R.

2016-01-01

Department of Atomic Energy in its scheme of harnessing the nuclear energy for electrical power generation and strategic applications has given a huge role to utilization of plutonium. In the power production programme, fast reactors with plutonium as fuel are expected to play a major role. This would require establishing fuel reprocessing plants to handle both thermal and fast reactor fuels. So in the nuclear fuel cycle facilities variety of chemical, metallurgical, mechanical operations have to be carried out involving significant inventories of "2"3"9 Pu and associated radionuclides. Plutonium is the most radiotoxic radionuclide and therefore any facility handling it has to be designed and operated with utmost care. Two problems of major concern in the protection of persons working in plutonium handling facilities are the internal exposure to the operating personnel from uptake of plutonium and transplutonic nuclides as they are highly radiotoxic and the radiation exposure of hands and eye lens during fuel fabrication operations especially while handling recycled high burn up plutonium. In view of the fact that annual limit for intake is very small for "2"3"9Pu and its radiation emission characteristics are such that it is a huge challenge for the health physicists to detect Pu in air and in workers. This paper discusses the principles and practices followed in providing radiological surveillance to workers in plutonium handling areas. The challenges in protecting the workers from receiving exposures to hands and eye lens in handling high burn up plutonium are also discussed. The sites having Pu fuel cycle facilities should have trained medical staff to handle cases involving excessive intake of plutonium. (author)

Enclosure for handling high activity materials

International Nuclear Information System (INIS)

Jimeno de Osso, F.

1977-01-01

One of the most important problems that are met at the laboratories producing and handling radioisotopes is that of designing, building and operating enclosures suitable for the safe handling of active substances. With this purpose in mind, an enclosure has been designed and built for handling moderately high activities under a shielding made of 150 mm thick lead. In this report a description is given of those aspects that may be of interest to people working in this field. (Author)

Enclosure for handling high activity materials

Energy Technology Data Exchange (ETDEWEB)

Jimeno de Osso, F

1977-07-01

One of the most important problems that are met at the laboratories producing and handling radioisotopes is that of designing, building and operating enclosures suitable for the safe handling of active substances. With this purpose in mind, an enclosure has been designed and built for handling moderately high activities under a shielding made of 150 mm thick lead. In this report a description is given of those aspects that may be of interest to people working in this field. (Author)

Year 2000 compliance issues.

Science.gov (United States)

1999-03-01

This month, we continue our coverage of the year 2000 (Y2K) problem as it affects healthcare facilities and the professionals who work in them. We present the following articles: "Checking PCs for Y2K Compliance"--In this article, we describe the probable sources of Y2K-related errors in PCs and present simple procedures for testing the Y2K compliance of PCs and application software. "Y2K Assessment Equipment Expectations"--In this article, we review the Y2K compliance data from a small sampling of hospitals to help answer the question "What percentage of medical equipment will likely be susceptible to Y2K problems?" "Y2K Labeling of Medical Devices"--In this article, we discuss the pros and cons of instituting a program to label each medical device with its Y2K status. Also in this section, we present an updated list of organizations that support ECRI's Position Statement on the testing of medical devices for Y2K compliance, which we published in the December 1998 issue of Health Devices (27[12]). And we remind readers of the services ECRI can offer to help healthcare institutions cope with the Y2K problem.

A methodology to simulate the cutting process for a nuclear dismantling simulation based on a digital manufacturing platform

International Nuclear Information System (INIS)

Hyun, Dongjun; Kim, Ikjune; Lee, Jonghwan; Kim, Geun-Ho; Jeong, Kwan-Seong; Choi, Byung Seon; Moon, Jeikwon

2017-01-01

Highlights: • Goal is to provide existing tech. with cutting function handling dismantling process. • Proposed tech. can handle various cutting situations in the dismantlement activities. • Proposed tech. can be implemented in existing graphical process simulation software. • Simulation results have demonstrated that the proposed technology achieves its goal. • Proposed tech. enlarges application of graphic simulation into dismantlement activity. - Abstract: This study proposes a methodology to simulate the cutting process in a digital manufacturing platform for the flexible planning of nuclear facility decommissioning. During the planning phase of decommissioning, visualization and verification using process simulation can be powerful tools for the flexible planning of the dismantling process of highly radioactive, large and complex nuclear facilities. However, existing research and commercial solutions are not sufficient for such a situation because complete segmented digital models for the dismantling objects such as the reactor vessel, internal assembly, and closure head must be prepared before the process simulation. The preparation work has significantly impeded the broad application of process simulation due to the complexity and workload. The methodology of process simulation proposed in this paper can flexibly handle various dismantling processes including repetitive object cuttings over heavy and complex structures using a digital manufacturing platform. The proposed methodology, which is applied to dismantling scenarios of a Korean nuclear power plant in this paper, is expected to reduce the complexity and workload of nuclear dismantling simulations.

40 CFR 73.35 - Compliance.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Compliance. 73.35 Section 73.35... ALLOWANCE SYSTEM Allowance Tracking System § 73.35 Compliance. (a) Allowance transfer deadline. No allowance... in § 73.34(a) of this part, the Administrator will deduct allowances for each source with excess...

The creep compliance, the relaxation modulus and the complex compliance of linear viscoelastic, homogeneous, isotropic materials

International Nuclear Information System (INIS)

Wong, P.K.

1989-01-01

This paper reports on a study to obtain the creep compliance, the relaxation modulus and the complex compliance derived from the concept of mechanical resistance for the constitutive equation of a class of linear viscoelastic, homogeneous, isotropic materials

Compliance of feed limits, does not mean compliance of food limits

Directory of Open Access Journals (Sweden)

van Raamsdonk LWD.

2009-01-01

Full Text Available The carry-over of contaminants from feed to animal food products is an important aspect of the animal production chain. For a proper containment, limits for feed as well food products are fixed for a series of chemicals, e.g. dioxins and dioxin-like PCBs, lead, cadmium, some chlorinated pesticides, and aflatoxin B1 (and its metabolite M1 in milk. The relationship between feed and food limits is an important issue. An ideal goal is to assure that compliance to a feed limits automatically results in compliance to food limits. In order to collect information about this relationship, several simulation models and a large database on transfer factors have been developed. An optimal choice between either a model or an application of data from the Transfer Database is based on both the knowledge level, and on the circumstances of the specific situation. To reach and validate such an optimal choice an Expert System Carry-Over is currently in development, containing four different modules: 1 the different calculation models and the Transfer Database, 2 a decision tree for choosing the optimal strategy, 3 data tables indicating knowledge levels of compound/animal/product parameters, and 4 supporting databases containing information on consumption and composition of daily diets, animal parameters, and amounts of (daily production. Calculations indicate that for dioxins compliance to feed levels does not necessarily mean that food limits are complied as well. Besides an estimation of the compliance to limits, the expert system is a tool for feed related risk assessments, and for planning of future research.

Specialization and Flexibility in Port Cargo Handling

Directory of Open Access Journals (Sweden)

Hakkı KİŞİ

2016-11-01

Full Text Available Cargo handling appears to be the fundamental function of ports. In this context, the question of type of equipment and capacity rate need to be tackled with respect to cargo handling principles. The purpose of this study is to discuss the types of equipment to be used in ports, relating the matter to costs and capacity. The question is studied with a basic economic theoretical approach. Various conditions like port location, size, resources, cargo traffic, ships, etc. are given parameters to dictate the type and specification of the cargo handling equipment. Besides, a simple approach in the context of cost capacity relation can be useful in deciding whether to use specialized or flexible equipment. Port equipment is sometimes expected to be flexible to handle various types of cargo as many as possible and sometimes to be specialized to handle one specific type of cargo. The cases that might be suitable for those alternatives are discussed from an economic point of view in this article. Consequently, effectiveness and efficiency criteria play important roles in determining the handling equipment in ports.

Monitoring compliance with requirements during site characterization

International Nuclear Information System (INIS)

Herrington, C.C.; Jennetta, A.R.; Dobson, D.C.

1991-01-01

The question of when a program of Regulatory Compliance should be applied and what it should be applied to, when the subject of compliance is a High Level Radioactive Waste Repository, defies resolution by merely relating to past practices of licensees of the US Nuclear Regulatory Commission (NRC). NRC regulations governing the disposal of High Level Waste include interactions with the potential applicant (US DOE) during the pre-license application phase of the program when the basis for regulatory compliance is not well defined. To offset this shortcoming, the DOE will establish an expanded basis for regulatory compliance, keeping the NRC apprised of the basis as it develops. As a result, the preapplication activities of DOE will assume the added benefit of qualification to a suitable Regulatory Compliance monitoring and maintenance plan

A methodology for radiological accidents analysis in industrial gamma radiography

International Nuclear Information System (INIS)

Silva, F.C.A. da.

1990-01-01

A critical review of 34 published severe radiological accidents in industrial gamma radiography, that happened in 15 countries, from 1960 to 1988, was performed. The most frequent causes, consequences and dose estimation methods were analysed, aiming to stablish better procedures of radiation safety and accidents analysis. The objective of this work is to elaborate a radiological accidents analysis methodology in industrial gamma radiography. The suggested methodology will enable professionals to determine the true causes of the event and to estimate the dose with a good certainty. The technical analytical tree, recommended by International Atomic Energy Agency to perform radiation protection and nuclear safety programs, was adopted in the elaboration of the suggested methodology. The viability of the use of the Electron Gamma Shower 4 Computer Code System to calculate the absorbed dose in radiological accidents in industrial gamma radiography, mainly at sup(192)Ir radioactive source handling situations was also studied. (author)

Understanding and managing compliance in the nature conservation context.

Science.gov (United States)

Arias, Adrian

2015-04-15

Nature conservation relies largely on peoples' rule adherence. However, noncompliance in the conservation context is common: it is one of the largest illegal activities in the world, degrading societies, economies and the environment. Understanding and managing compliance is key for ensuring effective conservation, nevertheless crucial concepts and tools are scattered in a wide array of literature. Here I review and integrate these concepts and tools in an effort to guide compliance management in the conservation context. First, I address the understanding of compliance by breaking it down into five key questions: who?, what?, when?, where? and why?. A special focus is given to 'why?' because the answer to this question explains the reasons for compliance and noncompliance, providing critical information for management interventions. Second, I review compliance management strategies, from voluntary compliance to coerced compliance. Finally, I suggest a system, initially proposed for tax compliance, to balance these multiple compliance management strategies. This paper differs from others by providing a broad yet practical scope on theory and tools for understanding and managing compliance in the nature conservation context. Copyright © 2015 Elsevier Ltd. All rights reserved.

ICF's Plant Compliance Assessment System

International Nuclear Information System (INIS)

Baker, S.M.

1989-01-01

Government and private industrial facilities must manage wastes that are both radioactive and (chemically) hazardous. Until recently, these mixed wastes have been managed under rules established under the Atomic Energy Act (AEA) and the Low-Level Waste Policy At, and rules that derive from environmental legislation have not been applied. Both sets of rules now apply to mixed wastes, creating situations in which significant changes to waste steams must be made in order to bring them into compliance with environmental regulations. The first step in bringing waste streams into compliance is to determine their status with respect to the newly-applicable regulations. This process of compliance assessment is difficult because requirements to minimize human exposure to radiation can conflict with requirements of environmental regulations, many regulations are potentially applicable, the regulations are changing rapidly, and because waste streams designed to operate under AEA rules frequently cannot be easily modified to incorporate the additional regulations. Modern personal computer (PC) tools are being developed to help regulatory analysts manage the large amounts of information required to asses the compliance status of complex process plants. This paper presents the Plant Compliance Assessment System (PCAS), which performs this function by relating a database containing references to regulatory requirements to databases created to describe relevant aspects of the facility to be assessed

HMSRP Hawaiian Monk Seal Handling Data

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains records for all handling and measurement of Hawaiian monk seals since 1981. Live seals are handled and measured during a variety of events...

Compliance with RSV prophylaxis: Global physicians’ perspectives

Directory of Open Access Journals (Sweden)

Kari S Anderson

2009-07-01

Full Text Available Kari S Anderson, Victoria M Mullally, Linda M Fredrick, Andrew L CampbellAbbott Laboratories, Abbott Park, IL, USAAbstract: Respiratory syncytial virus (RSV is a significant cause of morbidity in high-risk infants. Palivizumab is proven to prevent serious RSV disease, but compliance with prophylaxis (monthly doses during the RSV season is essential to ensure protection. We invited 453 pediatricians to participate in a survey to identify their perspectives of barriers to compliance and interventions to improve compliance with palivizumab prophylaxis schedules. One hundred physicians from five continents completed the survey, identifying caregiver inconvenience, distance to clinic, cost of prophylaxis, and lack of understanding of the severity of RSV as the most common reasons for noncompliance. They recommended provision of educational materials about RSV, reminders from hospital or clinic, and administration of prophylaxis at home to increase compliance. Globally, physicians recognize several obstacles to prophylaxis compliance. This survey suggests that focused proactive interventions such as empowering caregivers with educational materials and reducing caregiver inconvenience may be instrumental to increase compliance.Keywords: medication adherence, respiratory syncytial virus infections, infant, premature, immunization, passive

7 CFR 772.3 - Compliance.

Science.gov (United States)

2010-01-01

... SPECIAL PROGRAMS SERVICING MINOR PROGRAM LOANS § 772.3 Compliance. (a) Requirements. No Minor Program... parts 15d and 15e. (b) Reviews. In accordance with Title VI of the Civil Rights Act of 1964, the Agency will conduct a compliance review of all Minor Program borrowers, to determine if a borrower has...

Estimation of the compliance of the human capacitance vessels using radionuclide plethysmography. Comparison of the compliance with the NYHA functional classification

Energy Technology Data Exchange (ETDEWEB)

Takatsu, Hisato; Gotoh, Kohshi; Suzuki, Takahiko and others

1988-01-01

Radionuclide (RN) plethysmography with Tc-99m RBC was performed in 32 patients with heart disease with the purpose of obtaining compliance of human capacitance vessels. When equilibrium was achieved, RN counts of the region of interest and venous pressure in the forearm were sequentially recorded when the vein of the upper arm was occluded with a cuff inflator. Based on the RN count-venous pressure curve, the specific compliance of the forearm vein and compliance of systemic venous system (SVS) were estimated. In the group of the NYHA functional classification I, which is recognized as hemodynamically ''normal'', the compliance of SVS was 129.8 +- 25.9 ml center dot mmHg/sup -1/ (mean +- SD; n = 9). In comparing the NYHA functional classification and the compliance of SVS, the compliance of SVS was significantly decreased for severer heart failure. Tongue administration of nitroglycerin (0.6 mg) significantly increased the compliance of SVS (p < 0.01). (Namekawa, K.).

Preliminary risk analysis applied to the handling of health-care waste

Directory of Open Access Journals (Sweden)

Carvalho S.M.L.

2002-01-01

Full Text Available Between 75% and 90% of the waste produced by health-care providers no risk or is "general" health-care waste, comparable to domestic waste. The remaining 10-25% of health-care waste is regarded as hazardous due to one or more of the following characteristics: it may contain infectious agents, sharps, toxic or hazardous chemicals or it may be radioactive. Infectious health-care waste, particularly sharps, has been responsible for most of the accidents reported in the literature. In this work the preliminary risks analysis (PRA technique was used to evaluate practices in the handling of infectious health-care waste. Currently the PRA technique is being used to identify and to evaluate the potential for hazard of the activities, products, and services from facilities and industries. The system studied was a health-care establishment which has handling practices for infectious waste. Thirty-six procedures related to segregation, containment, internal collection, and storage operation were analyzed. The severity of the consequences of the failure (risk that can occur from careless management of infectious health-care waste was classified into four categories: negligible, marginal, critical, and catastrophic. The results obtained in this study showed that events with critics consequences, about 80%, may occur during the implementation of the containment operation, suggesting the need to prioritize this operation. As a result of the methodology applied in this work, a flowchart the risk series was also obtained. In the flowchart the events that can occur as a consequence of a improper handling of infectious health-care waste, which can cause critical risks such as injuries from sharps and contamination (infection from pathogenic microorganisms, are shown.

Directory of certificates of compliance for radioactive materials packages: Certificates of compliance

International Nuclear Information System (INIS)

1987-11-01

This directory contains a Summary Report of the US Nuclear Regulatory Commission's Certificates of Compliance (Volume 2) for Radioactive Material Packages effective October 1, 1987. This directory makes available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the back of Volume 2 of the directory. A listing by packaging types is included in the back of Volume 2

Compliance with occlusion therapy for childhood amblyopia.

Science.gov (United States)

Wallace, Michael P; Stewart, Catherine E; Moseley, Merrick J; Stephens, David A; Fielder, Alistair R

2013-09-17

Explore compliance with occlusion treatment of amblyopia in the Monitored and Randomized Occlusion Treatment of Amblyopia Studies (MOTAS and ROTAS), using objective monitoring. Both studies had a three-phase protocol: initial assessment, refractive adaptation, and occlusion. In the occlusion phase, participants were instructed to dose for 6 hours/day (MOTAS) or randomized to 6 or 12 hour/day (ROTAS). Dose was monitored continuously using an occlusion dose monitor (ODM). One hundred and fifty-two patients (71 male, 81 female; 122 Caucasian, 30 non-Caucasian) of mean ± SD age 68 ± 18 months participated. Amblyopia was defined as an interocular acuity difference of at least 0.1 logMAR and was associated with anisometropia in 50, strabismus in 44, and both (mixed) in 58. Median duration of occlusion was 99 days (interquartile range 72 days). Mean compliance was 44%, mean proportion of days with no patch worn was 42%. Compliance was lower (39%) on weekends compared with weekdays (46%, P = 0.04), as was the likelihood of dosing at all (52% vs. 60%, P = 0.028). Compliance was lower when attendance was less frequent (P amblyopia type, and severity were not associated with compliance. Mixture modeling suggested three subpopulations of patch day doses: less than 30 minutes; doses that achieve 30% to 80% compliance; and doses that achieve around 100% compliance. This study shows that compliance with patching treatment averages less than 50% and is influenced by several factors. A greater understanding of these influences should improve treatment outcome. (ClinicalTrials.gov number, NCT00274664).

Clean Air Markets - Compliance Query Wizard

Data.gov (United States)

U.S. Environmental Protection Agency — The Compliance Query Wizard is part of a suite of Clean Air Markets-related tools that are accessible at http://ampd.epa.gov/ampd/. The Compliance module provides...

Management of transport and handling contracts

CERN Document Server

Rühl, I

2004-01-01

This paper shall outline the content, application and management strategies for the various contracts related to transport and handling activities. In total, the two sections Logistics and Handling Maintenance are in charge of 27 (!) contracts ranging from small supply contracts to big industrial support contracts. The activities as well as the contracts can generally be divided into four main topics "Vehicle Fleet Management"; "Supply, Installation and Commissioning of Lifting and Hoisting Equipment"; "Equipment Maintenance" and "Industrial Support for Transport and Handling". Each activity and contract requires different approaches and permanent adaptation to the often changing CERN's requirements. In particular, the management and the difficulties experienced with the contracts E072 "Maintenance of lifting and hoisting equipment", F420 "Supply of seven overhead traveling cranes for LHC" and S090/S103 "Industrial support for transport and handling" will be explained in detail.

Ergonomics: safe patient handling and mobility.

Science.gov (United States)

Hallmark, Beth; Mechan, Patricia; Shores, Lynne

2015-03-01

This article reviews and investigates the issues surrounding ergonomics, with a specific focus on safe patient handling and mobility. The health care worker of today faces many challenges, one of which is related to the safety of patients. Safe patient handling and mobility is on the forefront of the movement to improve patient safety. This article reviews the risks associated with patient handling and mobility, and informs the reader of current evidence-based practice relevant to this area of care. Copyright © 2015 Elsevier Inc. All rights reserved.

Evaluation of a Short Message Service diary methodology in a nonclinical, naturalistic setting.

Science.gov (United States)

Walsh, Erin I; Brinker, Jay K

2012-11-01

Particularly suited to repeated measures in naturalistic settings, Short Message Service (SMS) is garnering increasing attention as a viable method of data collection. The current study explored issues of practical importance for the development of this methodology, including factors impacting on attrition and compliance, and participant perception of SMS. Using a business-card-sized questionnaire key, 98 university students were sent prompt SMS messages nightly for a week. Completion and compliance were very high in all participants who responded to at least one prompt SMS; those who responded at least once (n=63) responded to 83 percent of all seven prompts, with 95 percent of responses containing appropriate alphanumeric answers to all questions. However, a time lag between recruitment and participation was associated with a failure to commence the diary study. Participants reported positive perceptions of SMS privacy and convenience.

Compliance Issues in Higher Education

Science.gov (United States)

Benedek, Petra

2016-01-01

Efficiency in the 1980's, quality in the 1990's, compliance in the 2010's - private sector management techniques and mechanisms find their way to public services. This paper facilitates the understanding of how compliance management controls can improve operations and prevent or detect failure or wrong doing. The last few years' empirical research…

A Review of Factors for Tax Compliance

Directory of Open Access Journals (Sweden)

Nicoleta BARBUTA-MISU

2011-03-01

Full Text Available The aim of this paper is to identify the variables of tax compliance analysed by researchers from various countries and adapting them to the Romanian conditions to create a model to include factors that influence decision of tax compliance. Tax compliance has been studied in economics by analysing the individual decision of a representative person between paying taxes and evading taxes. In the research of tax compliance have been done many empirical studies that emphasized the impact of a wide variety of potential determinants of voluntary compliance with individual income/profit tax filing and reporting obligations. The most important determinants identified are: economic factors as the level of income, audit probabilities, tax audit, tax rate, tax benefits, penalties, fines and other non-economic factors as attitudes toward taxes, personal, social and national norms, perceived fairness etc.

Remote handling equipment

International Nuclear Information System (INIS)

Clement, G.

1984-01-01

After a definition of intervention, problems encountered for working in an adverse environment are briefly analyzed for development of various remote handling equipments. Some examples of existing equipments are given [fr

Welding method by remote handling

International Nuclear Information System (INIS)

Hashinokuchi, Minoru.

1994-01-01

Water is charged into a pit (or a water reservoir) and an article to be welded is placed on a support in the pit by remote handling. A steel plate is disposed so as to cover the article to be welded by remote handling. The welding device is positioned to the portion to be welded and fixed in a state where the article to be welded is shielded from radiation by water and the steel plate. Water in the pit is drained till the portion to be welded is exposed to the atmosphere. Then, welding is conducted. After completion of the welding, water is charged again to the pit and the welding device and fixing jigs are decomposed in a state where the article to be welded is shielded again from radiation by water and the steel plate. Subsequently, the steel plate is removed by remote handling. Then, the article to be welded is returned from the pit to a temporary placing pool by remote handling. This can reduce operator's exposure. Further, since the amount of the shielding materials can be minimized, the amount of radioactive wastes can be decreased. (I.N.)

Evaluating the police service quality for handling traffic crash reporting

DEFF Research Database (Denmark)

Janstrup, Kira Hyldekær; Kaplan, Sigal; Barfod, Michael Bruhn

2017-01-01

at the police service quality for handling the reporting of traffic crashes. Design/methodology/approach This study introduces a novel approach to evaluate service quality that combines multi-criteria decision analysis (MCDA) with latent class analysis (LCA). Moreover, this study presents the design of a web....../value This study advances the knowledge about police service quality with a novel expert-based decision support tool based on SERVQUAL, MCDA and LCA, demonstrates its applicability in countries with a high-police service, and opportunities and barriers for increasing the crash reporting rate....... participated in the survey that yielded 86 complete responses. Findings The novel approach was successfully applied and its implementation demonstrated the usefulness of the tool even in countries with a high police service. Results showed that the participating stakeholders perceived human factors as more...

Compliance als Schutz vor Verbandsverantwortlichkeit?

Directory of Open Access Journals (Sweden)

Alexander Tipold

2016-05-01

Full Text Available Compliance bedeutet nicht nur Einhaltung und Beachtung von Vorschriften, sondern betrifft auch Maßnahmen, die die Einhaltung der Rechtsnormen absichern sollen und läuft somit auf eine Übererfüllung von Verpflichtungen hinaus. Wenn es keinen klaren Maßstab für Kontroll- und Überwachungspflichten gibt, besteht die Gefahr, dass Strafverfolgungsbehörden die Compliance-Maßnahmen als Maßstab heranziehen und so eine Verschärfung der Pflichten erzeugen. Nach den Regeln des Verbandsverantwortlichkeitsgesetzes schließt im Übrigen das beste Compliance-System nicht zwingend die Verbandsverantwortlichkeit aus, steht aber unter Umständen einem Verfahren gegen den Verband entgegen.

The elderly on dialysis: some considerations in compliance.

Science.gov (United States)

McKevitt, P M; Jones, J F; Lane, D A; Marion, R R

1990-10-01

Compliance with scheduled treatments, dietary and fluid restrictions, and multiple medications is an important component in the care and well-being of end-stage renal disease (ESRD) patients. Given the rigorus and complex demands of dialysis, it is important to examine the issue of compliance, focusing on a large and ever-increasing segment of our patient population, the elderly. The ESRD literature reflects efforts to define and measure levels of compliance, identify factors that influence and predict compliance, and develop intervention strategies to improve adherence to treatment regimens. While limited attention has been focused specifically on the elderly, there are studies suggesting that age may be a factor associated with improved adherence and that social support may be a significant contributor to compliance in this patient group. In an effort to examine the current status and needs of the dialysis elderly, research is in progress at Chromalloy American Kidney Center, Washington University, which replicates a study of 5 years ago. Eighty-four patients age 60 and over, on dialysis for a minimum of 6 months, were identified. Sociodemographic, treatment, compliance, and functional capacity data were collected; additional mental and psychological testing was completed on patients willing and able to participate. Preliminary data suggest the current elderly population is larger and significantly older than that of 5 years ago. Other sociodemographic data indicate the population is increasingly female, black, and more socioeconomically disadvantaged. In regard to compliance, the vast majority of elderly demonstrate good compliance as measured by serum potassium, fair to good compliance with phosphorus, and fair to poor compliance with fluid restrictions.(ABSTRACT TRUNCATED AT 250 WORDS)

International Criminal Justice and the Politics of Compliance

NARCIS (Netherlands)

Lamont, Christopher

2010-01-01

International Criminal Justice and the Politics of Compliance provides a comprehensive study of compliance with legal obligations derived from the International Criminal Tribunal for the former Yugoslavia's (ICTY) Statute and integrates theoretical debates on compliance into international justice

Civilsamfundets ABC: H for Handling

DEFF Research Database (Denmark)

Lund, Anker Brink; Meyer, Gitte

2015-01-01

Hvad er civilsamfundet? Anker Brink Lund og Gitte Meyer fra CBS Center for Civil Society Studies gennemgår civilsamfundet bogstav for bogstav. Vi er nået til H for Handling.......Hvad er civilsamfundet? Anker Brink Lund og Gitte Meyer fra CBS Center for Civil Society Studies gennemgår civilsamfundet bogstav for bogstav. Vi er nået til H for Handling....

The technique on handling radiation

International Nuclear Information System (INIS)

1997-11-01

This book describes measurement of radiation and handling radiation. The first part deals with measurement of radiation. The contents of this part are characteristic on measurement technique of radiation, radiation detector, measurement of energy spectrum, measurement of radioactivity, measurement for a level of radiation and county's statistics on radiation. The second parts explains handling radiation with treating of sealed radioisotope, treating unsealed source and radiation shield.

77 FR 31371 - Public Workshop: Privacy Compliance Workshop

Science.gov (United States)

2012-05-25

... presentations, including the privacy compliance fundamentals, privacy and data security, and the privacy... DEPARTMENT OF HOMELAND SECURITY Office of the Secretary Public Workshop: Privacy Compliance... Homeland Security Privacy Office will host a public workshop, ``Privacy Compliance Workshop.'' DATES: The...

Ratemaking and accounting for allowances and compliance costs

International Nuclear Information System (INIS)

Anon.

1992-01-01

The regulatory treatment of compliance costs and allowances will significantly affect both the utility's CAAA compliance decisions and the cost of compliance. Sections in this chapter include ratemaking treatment of allowances, utility buy-ins, the market test of compliance costs and utility incentive, FERC account classification, measuring the value of allowances, inventory methods for allowances, expense recognition of allowances, regulatory-created assets and liabilities, and application of the FERC proposal. 8 refs., 1 tab

Uranium hexafluoride handling

International Nuclear Information System (INIS)

1991-01-01

The United States Department of Energy, Oak Ridge Field Office, and Martin Marietta Energy Systems, Inc., are co-sponsoring this Second International Conference on Uranium Hexafluoride Handling. The conference is offered as a forum for the exchange of information and concepts regarding the technical and regulatory issues and the safety aspects which relate to the handling of uranium hexafluoride. Through the papers presented here, we attempt not only to share technological advances and lessons learned, but also to demonstrate that we are concerned about the health and safety of our workers and the public, and are good stewards of the environment in which we all work and live. These proceedings are a compilation of the work of many experts in that phase of world-wide industry which comprises the nuclear fuel cycle. Their experience spans the entire range over which uranium hexafluoride is involved in the fuel cycle, from the production of UF 6 from the naturally-occurring oxide to its re-conversion to oxide for reactor fuels. The papers furnish insights into the chemical, physical, and nuclear properties of uranium hexafluoride as they influence its transport, storage, and the design and operation of plant-scale facilities for production, processing, and conversion to oxide. The papers demonstrate, in an industry often cited for its excellent safety record, continuing efforts to further improve safety in all areas of handling uranium hexafluoride

Information security policy development for compliance

CERN Document Server

Williams, Barry L

2013-01-01

Although compliance standards can be helpful guides to writing comprehensive security policies, many of the standards state the same requirements in slightly different ways. Information Security Policy Development for Compliance: ISO/IEC 27001, NIST SP 800-53, HIPAA Standard, PCI DSS V2.0, and AUP V5.0 provides a simplified way to write policies that meet the major regulatory requirements, without having to manually look up each and every control. Explaining how to write policy statements that address multiple compliance standards and regulatory requirements, the book will he

Compliance officers and legal advisers in power supply companies. interactions between compliance, risk management and the employer-employee relationship; Compliance-Beauftragte und Justitiare in EVU. Wechselwirkungen von Compliance, Risikomanagement und Arbeitsverhaeltnis

Energy Technology Data Exchange (ETDEWEB)

Gold, Juergen [Sozietaet Becker Buettner Held, Muenchen (Germany); Schaefer, Ralf; Bussmann, Sandra [Sozietaet Becker Buettner Held, Koeln (Germany)

2011-06-15

An inevitable task of any employee who has been appointed compliance officer, head of the legal department or internal auditor is to ensure that the company is protected against detriment through breaches of law or regulations. Another of his or her tasks, however, and one which might not be as obvious, is to ensure that parties outside the company are protected against detriment through his or her own employer. In order to deal appropriately with these and related questions some basic considerations on the necessity and function of compliance surveillance and its relationship with risk management must first be made. Using two significant court decisions for illustration the authors make a close examination of the liability issues involved in this area of potential conflict. They identify some salient points which should be considered in framing the contractual relationship between a compliance officer and his or her employer.

Handling Pyrophoric Reagents

Energy Technology Data Exchange (ETDEWEB)

Alnajjar, Mikhail S.; Haynie, Todd O.

2009-08-14

Pyrophoric reagents are extremely hazardous. Special handling techniques are required to prevent contact with air and the resulting fire. This document provides several methods for working with pyrophoric reagents outside of an inert atmosphere.

Contemplating compliance: European compliance mechanisms in international perspective

NARCIS (Netherlands)

Koops, C.E.

2014-01-01

How can international organizations make their Member States comply with the rules of the organization? Which is the more effective method: to coax and entice, to argue and persuade, or to threaten and punish? On the basis of which criteria should a compliance mechanism be construed and applied,

Simulation-based design process for the verification of ITER remote handling systems

International Nuclear Information System (INIS)

Sibois, Romain; Määttä, Timo; Siuko, Mikko; Mattila, Jouni

2014-01-01

Highlights: •Verification and validation process for ITER remote handling system. •Simulation-based design process for early verification of ITER RH systems. •Design process centralized around simulation lifecycle management system. •Verification and validation roadmap for digital modelling phase. -- Abstract: The work behind this paper takes place in the EFDA's European Goal Oriented Training programme on Remote Handling (RH) “GOT-RH”. The programme aims to train engineers for activities supporting the ITER project and the long-term fusion programme. One of the projects of this programme focuses on the verification and validation (V and V) of ITER RH system requirements using digital mock-ups (DMU). The purpose of this project is to study and develop efficient approach of using DMUs in the V and V process of ITER RH system design utilizing a System Engineering (SE) framework. Complex engineering systems such as ITER facilities lead to substantial rise of cost while manufacturing the full-scale prototype. In the V and V process for ITER RH equipment, physical tests are a requirement to ensure the compliance of the system according to the required operation. Therefore it is essential to virtually verify the developed system before starting the prototype manufacturing phase. This paper gives an overview of the current trends in using digital mock-up within product design processes. It suggests a simulation-based process design centralized around a simulation lifecycle management system. The purpose of this paper is to describe possible improvements in the formalization of the ITER RH design process and V and V processes, in order to increase their cost efficiency and reliability

Compliance with barrier precautions during paediatric trauma resuscitations.

Science.gov (United States)

Kelleher, Deirdre C; Carter, Elizabeth A; Waterhouse, Lauren J; Burd, Randall S

2013-03-01

Barrier precautions protect patients and providers from blood-borne pathogens. Although barrier precaution compliance has been shown to be low among adult trauma teams, it has not been evaluated during paediatric resuscitations in which perceived risk of disease transmission may be low. The purpose of this study was to identify factors associated with compliance with barrier precautions during paediatric trauma resuscitations. Video recordings of resuscitations performed on injured children (compliance with an established policy requiring gowns and gloves. Depending on activation level, trauma team members included up to six physicians, four nurses, and a respiratory therapist. Multivariate logistic regression was used to determine the effect of team role, resuscitation factors, and injury mechanism on barrier precaution compliance. Over twelve weeks, 1138 trauma team members participated in 128 resuscitations (4.7% penetrating injuries, 9.4% highest level activations). Compliance with barrier precautions was 81.3%, with higher compliance seen among roles primarily at the bedside compared to positions not primarily at the bedside (90.7% vs. 65.1%, pcompliance, while surgical attendings (20.8%) had the lowest (prole, increased compliance was observed during resuscitations of patients with penetrating injuries (OR=3.97 [95% CI: 1.35-11.70], p=0.01), during resuscitations triaged to the highest activation level (OR=2.61 [95% CI: 1.34-5.10], p=0.005), and among team members present before patient arrival (OR=4.14 [95% CI: 2.29-7.39], pCompliance with barrier precautions varies by trauma team role. Team members have higher compliance when treating children with penetrating and high acuity injuries and when arriving before the patient. Interventions integrating barrier precautions into the workflow of team members are needed to reduce this variability and improve compliance with universal precautions during paediatric trauma resuscitations. Copyright © 2012 Elsevier

[Insufficient medication compliance in Parkinson's disease

NARCIS (Netherlands)

Aerts, M.B.; Eijk, M. van der; Kramers, C.; Bloem, B.R.

2011-01-01

Medication compliance is generally suboptimal, particularly in patients with complex polypharmacy. This generic treatment problem is described here for Parkinson's disease (PD). We would expect patients with PD to have good medication compliance, since missed doses immediately result in worsening of

WITS - WASTE DATA COLLECTION WITH OUR PALMS AT OUR FINGERTIPS

International Nuclear Information System (INIS)

Martinez, B.

2000-01-01

The waste management and environmental compliance group (NMT-7) at the Los Alamos National Laboratory (LANL) has initiated a project to build a computer-based system for tracking inventory, storage and disposal information for hazardous and radioactive waste and contaminated byproducts. This project, the Waste Inventory Tracking System (WITS), will initially be used in TA-55 (which includes the Los Alamos National Laboratory Plutonium Facility) and the Chemical and Metallurgy Research (CMR) building where wastes are generated. The system handles numerous waste types with variation in size, disposal method, and hazard classification including: low level waste such as room trash (compactable waste), SEG waste (non-compactable), and over-sized waste, mixed waste, hazardous and chemical waste, universal waste, and waste containing asbestos and PCB's. WITS is designed to provide up-to-date location, status, content information, radioactivity analyses, and other inventory information for every waste item and container managed by NMT-7. The system will support comprehensive reporting capabilities and cradle-to-grave audit trails. WITS is intended to facilitate handling of waste by NMT-7 staff to help minimize waste disposal costs, ensure compliance with applicable regulations, and standardize waste management methodologies and practices. This paper compares current management practices with revised methodologies supported by WITS. It shows how automating inventory tracking helps achieve these goals

As-Built Verification Plan Spent Nuclear Fuel Canister Storage Building MCO Handling Machine

International Nuclear Information System (INIS)

SWENSON, C.E.

2000-01-01

This as-built verification plan outlines the methodology and responsibilities that will be implemented during the as-built field verification activity for the Canister Storage Building (CSB) MCO HANDLING MACHINE (MHM). This as-built verification plan covers THE ELECTRICAL PORTION of the CONSTRUCTION PERFORMED BY POWER CITY UNDER CONTRACT TO MOWAT. The as-built verifications will be performed in accordance Administrative Procedure AP 6-012-00, Spent Nuclear Fuel Project As-Built Verification Plan Development Process, revision I. The results of the verification walkdown will be documented in a verification walkdown completion package, approved by the Design Authority (DA), and maintained in the CSB project files

ATA diagnostic data handling system: an overview

International Nuclear Information System (INIS)

Chambers, F.W.; Kallman, J.; McDonald, J.; Slominski, M.

1984-01-01

The functions to be performed by the ATA diagnostic data handling system are discussed. The capabilities of the present data acquisition system (System 0) are presented. The goals for the next generation acquisition system (System 1), currently under design, are discussed. Facilities on the Octopus system for data handling are reviewed. Finally, we discuss what has been learned about diagnostics and computer based data handling during the past year

Business process compliance management : an integrated proactive approach

NARCIS (Netherlands)

Elgammal, A.; Sebahi, S.; Turetken, O.; Hacid, M.-S.; Papazoglou, M.; van den Heuvel, W.; Soliman, K.S.

2014-01-01

Today’s enterprises demand a high degree of compliance of business processes to meet regulations, such as Sarbanes-Oxley and Basel I-III. To ensure continuous guaranteed compliance, compliance management should be considered during all phases of the business process lifecycle; from the analysis and

High-throughput transformation of Saccharomyces cerevisiae using liquid handling robots.

Directory of Open Access Journals (Sweden)

Guangbo Liu

Full Text Available Saccharomyces cerevisiae (budding yeast is a powerful eukaryotic model organism ideally suited to high-throughput genetic analyses, which time and again has yielded insights that further our understanding of cell biology processes conserved in humans. Lithium Acetate (LiAc transformation of yeast with DNA for the purposes of exogenous protein expression (e.g., plasmids or genome mutation (e.g., gene mutation, deletion, epitope tagging is a useful and long established method. However, a reliable and optimized high throughput transformation protocol that runs almost no risk of human error has not been described in the literature. Here, we describe such a method that is broadly transferable to most liquid handling high-throughput robotic platforms, which are now commonplace in academic and industry settings. Using our optimized method, we are able to comfortably transform approximately 1200 individual strains per day, allowing complete transformation of typical genomic yeast libraries within 6 days. In addition, use of our protocol for gene knockout purposes also provides a potentially quicker, easier and more cost-effective approach to generating collections of double mutants than the popular and elegant synthetic genetic array methodology. In summary, our methodology will be of significant use to anyone interested in high throughput molecular and/or genetic analysis of yeast.

Cask and plug handling system design in port cell

International Nuclear Information System (INIS)

Martins, Jean-Pierre; Friconneau, Jean-Pierre; Gabellini, Eros; Keller, Delphine; Levesy, Bruno; Selvi, Anna; Tesini, Alessandro; Utin, Yuri; Wagrez, Julien

2011-01-01

The ITER maintenance strategy relies partly on the remote transfer of components from vacuum vessel to hot cells. This function will be fulfilled by transfer cask systems. This paper describes the recent design progresses on interfaces in order to increase components handling feasibility by implementing continuous guiding features that avoid cantilevered loads on the in-cask tractor. Also the design has progressed in order to allow generic docking of the casks. When the cask is connected to the port, it becomes part of the machine first confinement boundary, thus it must provide tightness continuity. This high level safety function was one of the main concerns of a finite element analysis study that has been performed to assess the behavior of the whole system. Numerical analysis methodology and results are explained and shown in order to highlight how it has reinforced the knowledge of the system.

Compliance with Antimalaria Chemoprophylaxis in a Combat Zone

Science.gov (United States)

Brisson, Michael; Brisson, Paul

2012-01-01

Compliance with malaria chemoprophylaxis by military service members (MSMs) is notoriously low, ranging from 30% to 56%. Our objective was to determine the rate of compliance and reasons for non-compliance with malaria chemoprophylaxis among healthy US MSMs in Afghanistan. An eight-question, anonymous online survey was used to collect data regarding the compliance of healthy MSMs with malaria chemoprophylaxis. E-mail surveys were sent to 1,200 MSMs; 528 (44%) MSMs completed the survey. One-time daily doxycycline was the most commonly prescribed chemoprophylaxis (90%); 60% (N = 318) responded that they were compliant with their chemoprophylaxis as prescribed, whereas 40% (N = 221) indicated that they were not compliant. Compliance with daily dosing was 61% and weekly dosing was 38%. The most common reasons for non-compliance were gastrointestinal effects (39%), forgetfulness (31%), and low perception of risk (24%). Malaria chemoprophylaxis compliance by healthy MSMs in Afghanistan is poor. Side effects, forgetfulness, and lack of education are contributing factors. Commanders bear the primary responsibility for the health of their soldiers, and the individual MSM bears personal responsibility; however, additional public health interventions could possibly have a positive impact on prevention. PMID:22492140

Automation of 3D micro object handling process

DEFF Research Database (Denmark)

Gegeckaite, Asta; Hansen, Hans Nørgaard

2007-01-01

Most of the micro objects in industrial production are handled with manual labour or in semiautomatic stations. Manual labour usually makes handling and assembly operations highly flexible, but slow, relatively imprecise and expensive. Handling of 3D micro objects poses special challenges due to ...

INDONESIA SHARI'AH COMPLIANCE STOCK RETURN BEHAVIOUR

Directory of Open Access Journals (Sweden)

Helma Malini

2017-04-01

Full Text Available This study aims to measures the behaviour of Indonesia Shari'ah compliance stock return. The measurement of return behaviour toward volatility will proved the capability of Indonesia Shari'ah compliance toward volatility that happened in Indonesia during the period of observation. Investing in Shari'ah compliance is quite different than investing in conventional stock which followed the capital market set of rules and law, Shari'ah compliance follows not only the capital market set of laws and but also the Islamic principles of principles. Most of the previous studies examine issues related to the conventional stocks and market. The present study take one step further by investigating issue related to Shari'ah compliance instrument. In the case of Shari'ah stock price in Indonesia, the dynamics volatility of the stock price can be minimized by taking an integrated screening process to the listed company, as precautions steps toward volatility

The everyday elasticity of compliance in a symptomless disease

DEFF Research Database (Denmark)

Felde, Lina Hoel

2011-01-01

Medically, compliance refers to the extent to which a patient's response to medical advice coincides with doctors' orders. Rather than this absolute standard, this article treats compliance as an institutionally available discourse continually figured in practice. The aim of this article is to de......Medically, compliance refers to the extent to which a patient's response to medical advice coincides with doctors' orders. Rather than this absolute standard, this article treats compliance as an institutionally available discourse continually figured in practice. The aim of this article...... give-and-take. This elasticity of compliance reveals a reflexive critique of medical compliance as a moral standard and leads us to discuss how people are adequately compliant in everyday moral contexts....

Computational implementation of a systems prioritization methodology for the Waste Isolation Pilot Plant: A preliminary example

Energy Technology Data Exchange (ETDEWEB)

Helton, J.C. [Arizona State Univ., Tempe, AZ (United States). Dept. of Mathematics; Anderson, D.R. [Sandia National Labs., Albuquerque, NM (United States). WIPP Performance Assessments Departments; Baker, B.L. [Technadyne Engineering Consultants, Albuquerque, NM (United States)] [and others

1996-04-01

A systems prioritization methodology (SPM) is under development to provide guidance to the US DOE on experimental programs and design modifications to be supported in the development of a successful licensing application for the Waste Isolation Pilot Plant (WIPP) for the geologic disposal of transuranic (TRU) waste. The purpose of the SPM is to determine the probabilities that the implementation of different combinations of experimental programs and design modifications, referred to as activity sets, will lead to compliance. Appropriate tradeoffs between compliance probability, implementation cost and implementation time can then be made in the selection of the activity set to be supported in the development of a licensing application. Descriptions are given for the conceptual structure of the SPM and the manner in which this structure determines the computational implementation of an example SPM application. Due to the sophisticated structure of the SPM and the computational demands of many of its components, the overall computational structure must be organized carefully to provide the compliance probabilities for the large number of activity sets under consideration at an acceptable computational cost. Conceptually, the determination of each compliance probability is equivalent to a large numerical integration problem. 96 refs., 31 figs., 36 tabs.

Computational implementation of a systems prioritization methodology for the Waste Isolation Pilot Plant: A preliminary example

International Nuclear Information System (INIS)

Helton, J.C.

1996-04-01

A systems prioritization methodology (SPM) is under development to provide guidance to the US DOE on experimental programs and design modifications to be supported in the development of a successful licensing application for the Waste Isolation Pilot Plant (WIPP) for the geologic disposal of transuranic (TRU) waste. The purpose of the SPM is to determine the probabilities that the implementation of different combinations of experimental programs and design modifications, referred to as activity sets, will lead to compliance. Appropriate tradeoffs between compliance probability, implementation cost and implementation time can then be made in the selection of the activity set to be supported in the development of a licensing application. Descriptions are given for the conceptual structure of the SPM and the manner in which this structure determines the computational implementation of an example SPM application. Due to the sophisticated structure of the SPM and the computational demands of many of its components, the overall computational structure must be organized carefully to provide the compliance probabilities for the large number of activity sets under consideration at an acceptable computational cost. Conceptually, the determination of each compliance probability is equivalent to a large numerical integration problem. 96 refs., 31 figs., 36 tabs

Physician Verbal Compliance-Gaining Strategies and Patient Satisfaction

Science.gov (United States)

Olynick, Janna; Iliopulos, Alexandra; Li, Han Z.

2017-01-01

Purpose: The patient healthcare experience is a complex phenomenon, as is encouraging patient compliance with medical advice. To address this multifaceted relationship, the purpose of this paper is to explore the ways resident physicians verbally encourage patient compliance and the relationship between these compliance-seeking strategies and…

Savannah River Certification Plan for newly generated, contact-handled transuranic waste

International Nuclear Information System (INIS)

Wierzbicki, K.S.

1986-01-01

This Certification Plan document describes the necessary processes and methods for certifying unclassified, newly generated, contact-handled solid transuranic (TRU) waste at the Savannah River Plant and Laboratory (SRP, SRL) to comply with the Waste Isolation Pilot Plant Waste Acceptance Criteria (WIPP-WAC). Section 2 contains the organizational structure as related to waste certification including a summary of functional responsibilities, levels of authority, and lines of communication of the various organizations involved in certification activities. Section 3 describes general plant operations and TRU waste generation. Included is a description of the TRU Waste classification system. Section 4 contains the SR site TRU Waste Quality Assurance Program Plan. Section 5 describes waste container procurement, inspection, and certification prior to being loaded with TRU waste. Certification of waste packages, after package closure in the waste generating areas, is described in Section 6. The packaging and certification of individual waste forms is described in Attachments 1-5. Included in each attachment is a description of controls used to ensure that waste packages meet all applicable waste form compliance requirements for shipment to the WIPP. 3 figs., 3 tabs

Multicriteria decision methodology for selecting technical alternatives in the Mixed Waste Integrated Program

International Nuclear Information System (INIS)

Ferrada, J.J.; Berry, J.B.

1993-11-01

The US Department of Energy (DOE) Mixed Waste Integrated Program (MWIP) has as one of its tasks the identification of a decision methodology and key decision criteria for the selection methodology. The aim of a multicriteria analysis is to provide an instrument for a systematic evaluation of distinct alternative projects. Determination of this methodology will clarify (1) the factors used to evaluate these alternatives, (2) the evaluator's view of the importance of the factors, and (3) the relative value of each alternative. The selected methodology must consider the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) decision-making criteria for application to the analysis technology subsystems developed by the DOE Office of Technology Development. This report contains a compilation of several decision methodologies developed in various national laboratories, institutions, and universities. The purpose of these methodologies may vary, but the core of the decision attributes are very similar. Six approaches were briefly analyzed; from these six, in addition to recommendations made by the MWIP technical support group leaders and CERCLA, the final decision methodology was extracted. Slight variations are observed in the many methodologies developed by different groups, but most of the analyzed methodologies address similar aspects for the most part. These common aspects were the core of the methodology suggested in this report for use within MWIP for the selection of technologies. The set of criteria compiled and developed for this report have been grouped in five categories: (1) process effectiveness, (2) developmental status, (3) life-cycle cost, (4) implementability, and (5) regulatory compliance

Long term telemedicine study of compliance in paranoid schizophrenia.

Science.gov (United States)

Krzystanek, Marek; Krzeszowski, Dariusz; Jagoda, Karolina; Krysta, Krzysztof

2015-09-01

Low compliance is one of the crucial problems of contemporary psychiatry. Relapses, deterioration of cognitive functioning, negative symptoms, neuroleptic resistance are the examples of many consequences of noncompliance in schizophrenia The study was designed to assess the compliance in the 200 patients diagnosed with paranoid schizophrenia, all in the state of symptomatic remission and on the stable neuroleptic treatment. The compliance was assessed using a telepsychiatric system, sending reminders: 1 hour before the planned dose to remind them that drug intake is approaching, and at the moment of intake to check if they took the drug. The confirmed drug intakes were counted by the telepsychiatric system. 158 patients completed the study period. The compliance in the first month of the treatment was 44.6% and decreased over the rest of the period to the level of 33.4%. 50% of the schizophrenic patients were compliant at a level lower than 37%. This group was considered the low compliance group, and in this group the compliance increased after 6 months from 9.3% to 10.3% (p<0.0001). The compliance in the group of schizophrenic patients in remission is very low. The telemedicine system improves the compliance in the patients with the worst compliance.

Scheduling of outbound luggage handling at airports

DEFF Research Database (Denmark)

Barth, Torben C.; Pisinger, David

2012-01-01

This article considers the outbound luggage handling problem at airports. The problem is to assign handling facilities to outbound flights and decide about the handling start time. This dynamic, near real-time assignment problem is part of the daily airport operations. Quality, efficiency......). Another solution method is a decomposition approach. The problem is divided into different subproblems and solved in iterative steps. The different solution approaches are tested on real world data from Frankfurt Airport....

Sequence trajectory generation for garment handling systems

OpenAIRE

Liu, Honghai; Lin, Hua

2008-01-01

This paper presents a novel generic approach to the planning strategy of garment handling systems. An assumption is proposed to separate the components of such systems into a component for intelligent gripper techniques and a component for handling planning strategies. Researchers can concentrate on one of the two components first, then merge the two problems together. An algorithm is addressed to generate the trajectory position and a clothes handling sequence of clothes partitions, which ar...

Enhanced wood fuel handling: market and design studies

Energy Technology Data Exchange (ETDEWEB)

Landen, R.; Rippengal, R.; Redman, A.N.

1997-09-01

This report examines the potential for the manufacture and sale of novel wood fuel handling systems as a means of addressing users' concerns regarding current capital costs and potential high labour costs of non-automated systems. The report considers fuel handling technology that is basically appropriate for wood-fired heating systems of between c.100kW and c.1MW maximum continuous rating. This report details work done by the project collaborators in order to: (1) assess the current status of wood fuel handling technology; (2) evaluate the market appetite for improved wood fuel handling technology; (3) derive capital costs which are acceptable to customers; (4) review design options; and (5) select one or more design options worthy of further development. The current status of wood fuel handling technology is determined, and some basic modelling to give guidance on acceptable capital costs of 100-1000kW wood fuel handling systems is undertaken. (author)

Rocky Flats Compliance Program

International Nuclear Information System (INIS)

1994-02-01

The Department of Energy (DOE) established the Office of Technology Development (EM-50) (OTD) as an element of Environmental Restoration and Waste Management (EM) in November 1989. The primary objective of the Office of Technology Development, Rocky Flats Compliance Program (RFCP), is to develop altemative treatment technologies for mixed low-level waste (wastes containing both hazardous and radioactive components) to use in bringing the Rocky Flats Plant (RFP) into compliance with Federal and state regulations and agreements. Approximately 48,000 cubic feet of untreated low-level mixed waste, for which treatment has not been specified, are stored at the RFP. The cleanup of the Rocky Flats site is driven by agreements between DOE, the Environmental Protection Agency (EPA), and the Colorado Department of Health (CDH). Under these agreements, a Comprehensive Treatment and Management Plan (CTMP) was drafted to outline the mechanisms by which RFP will achieve compliance with the regulations and agreements. This document describes DOE's strategy to treat low-level mixed waste to meet Land Disposal Restrictions and sets specific milestones related to the regulatory aspects of technology development. These milestones detail schedules for the development of technologies to treat all of the mixed wastes at the RFP. Under the Federal Facilities Compliance Act (FFCA), the CTMP has been incorporated into Rocky Flats Plant Conceptual Site Treatment Plan (CSTP). The CSTP will become the Rocky Flats Plant site Treatment Plan in 1995 and will supersede the CTMP

14 CFR 431.83 - Compliance monitoring.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Compliance monitoring. 431.83 Section 431.83 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Requirements-Reusable Launch Vehicle Mission License Terms and Conditions § 431.83 Compliance monitoring. A...

14 CFR 437.93 - Compliance monitoring.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Compliance monitoring. 437.93 Section 437.93 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION, DEPARTMENT....93 Compliance monitoring. A permittee must allow access by, and cooperate with, federal officers or...

14 CFR 420.49 - Compliance monitoring.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Compliance monitoring. 420.49 Section 420.49 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Compliance monitoring. A licensee shall allow access by and cooperate with federal officers or employees or...

40 CFR 425.05 - Compliance dates.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Compliance dates. 425.05 Section 425.05 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS LEATHER TANNING AND FINISHING POINT SOURCE CATEGORY General Provisions § 425.05 Compliance dates...

Diagnostic information in temporal compliance checking

NARCIS (Netherlands)

Ramezani Taghiabadi, E.; Fahland, D.; Dongen, van B.F.; Aalst, van der W.M.P.

2012-01-01

Compliance checking is gaining importance as today’s organizations need to show that operational processes are executed in a controlled manner while satisfying prede¿ned (legal) requirements. Deviations may be costly and expose the organization to severe risks. Compliance checking is of growing

34 CFR 1200.170 - Compliance procedures.

Science.gov (United States)

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false Compliance procedures. 1200.170 Section 1200.170 Education Regulations of the Offices of the Department of Education (Continued) NATIONAL COUNCIL ON... agency shall notify the Architectural and Transportation Barriers Compliance Board upon receipt of any...

Wall compliance and violin cavity modes.

Science.gov (United States)

Bissinger, George

2003-03-01

Violin corpus wall compliance, which has a substantial effect on cavity mode frequencies, was added to Shaw's two-degree-of-freedom (2DOF) network model for A0 ("main air") and A1 (lowest length mode included in "main wood") cavity modes. The 2DOF model predicts a V(-0.25) volume dependence for A0 for rigid violin-shaped cavities, to which a semiempirical compliance correction term, V(-x(c)) (optimization parameter x(c)) consistent with cavity acoustical compliance and violin-based scaling was added. Optimizing x(c) over A0 and A1 frequencies measured for a Hutchins-Schelleng violin octet yielded x(c) approximately 0.08. This markedly improved A0 and A1 frequency predictions to within approximately +/- 10% of experiment over a range of about 4.5:1 in length, 10:1 in f-hole area, 3:1 in top plate thickness, and 128:1 in volume. Compliance is a plausible explanation for A1 falling close to the "main wood" resonance, not increasingly higher for the larger instruments, which were scaled successively shorter compared to the violin for ergonomic and practical reasons. Similarly incorporating compliance for A2 and A4 (lowest lower-/upper-bout modes, respectively) improves frequency predictions within +/-20% over the octet.

Safety and availability of the fuel handling system at Embalse nuclear power plant

International Nuclear Information System (INIS)

Santaliz, Jorge O.; Paredes, Juan A.

1998-01-01

The paper attempts the Fuel Handling (F/H) System maintenance and operating methodology at the Embalse Power Station. It doesn't refer to the F/H process, because it's common and well known by all the CANDU Stations. Instead of that, the presentation will be focused on people qualification, training and selection. Also the key subjects for a smooth and successful operation. Additionally will be remarked the human aspect and the role of the person in the organization. The safe and reliable operation of the CNE Fuel Handling System has been always target, supported by the operational experience. The accountability and fitness for the job were the main qualification for the crew members. They have very clear their role and the importance of equipment which they are operating or manipulating. The person who has greater experience and responsibility must struggle continuously to keep the safe and confident operation. Also we have to increase permanently our knowledge with a greater training and experience exchange with another CANDU 6 Station, like this Conference which let us to grow as persons and technicians. It also allows our utility to have access to other realities and work methods. (authors)

Tax compliance costs: a business administration perspective

OpenAIRE

Eichfelder, Sebastian; Schorn, Michael

2009-01-01

The paper analyses the relationship of tax compliance costs and business strategy. Due to instruments, like information technology, simplified cash accounting or outsourcing compliance activities to tax advisers, private businesses have a set of strategies to optimize their tax compliance cost burden. Under the assumption of rational choice a private business should choose a cost-optimal administration strategy. In spite of that we find empirical evidence for small German businesses using onl...

Remote handling for an ISIS target change

International Nuclear Information System (INIS)

Broome, T.A.; Holding, M.

1989-01-01

During 1987 two ISIS targets were changed. This document describes the main features of the remote handling aspects of the work. All the work has to be carried out using remote handling techniques. The radiation level measured on the surface of the reflector when the second target had been removed was about 800 mGy/h demonstrating that hands on operations on any part of the target reflector moderator assembly is not practical. The target changes were the first large scale operations in the Target Station Remote Handling Cell and a great deal was learned about both equipment and working practices. Some general principles emerged which are applicable to other active handling tasks on facilities like ISIS and these are discussed below. 8 figs

Compliance With Infection Prevention Guidelines By Health Care ...

African Journals Online (AJOL)

revealed varied levels of compliance on different components of infection prevention. The highest level of compliance (100%) was with single use of needles and syringes while the lowest (35.1) was with decontamination of needles and syringes with 0.5% chlorine solution prior to disposal. Compliance with hand hygiene ...

30 CFR 773.11 - Review of compliance history.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Review of compliance history. 773.11 Section... REGULATORY PROGRAMS REQUIREMENTS FOR PERMITS AND PERMIT PROCESSING § 773.11 Review of compliance history. (a... histories of compliance with the Act or the applicable State regulatory program, and any other applicable...

Compliance to two city convenience store ordinance requirements

Science.gov (United States)

Menéndez, Cammie K Chaumont; Amandus, Harlan E; Wu, Nan; Hendricks, Scott A

2015-01-01

Background Robbery-related homicides and assaults are the leading cause of death in retail businesses. Robbery reduction approaches focus on compliance to Crime Prevention Through Environmental Design (CPTED) guidelines. Purpose We evaluated the level of compliance to CPTED guidelines specified by convenience store safety ordinances effective in 2010 in Dallas and Houston, Texas, USA. Methods Convenience stores were defined as businesses less than 10 000 square feet that sell grocery items. Store managers were interviewed for store ordinance requirements from August to November 2011, in a random sample of 594 (289 in Dallas, 305 in Houston) convenience stores that were open before and after the effective dates of their city’s ordinance. Data were collected in 2011 and analysed in 2012–2014. Results Overall, 9% of stores were in full compliance, although 79% reported being registered with the police departments as compliant. Compliance was consistently significantly higher in Dallas than in Houston for many requirements and by store type. Compliance was lower among single owner-operator stores compared with corporate/franchise stores. Compliance to individual requirements was lowest for signage and visibility. Conclusions Full compliance to the required safety measures is consistent with industry ‘best practices’ and evidence-based workplace violence prevention research findings. In Houston and Dallas compliance was higher for some CPTED requirements but not the less costly approaches that are also the more straightforward to adopt. PMID:26337569

Caregivers' compliance with referral advice

DEFF Research Database (Denmark)

Lal, Sham; Ndyomugenyi, Richard; Paintain, Lucy

2018-01-01

BACKGROUND: Several malaria endemic countries have implemented community health worker (CHW) programmes to increase access to populations underserved by health care. There is considerable evidence on CHW adherence to case management guidelines, however, there is limited evidence on the compliance...... in the control arm were trained to treat malaria with ACTs based on fever symptoms. Caregivers' referral forms were linked with CHW treatment forms to determine whether caregivers complied with the referral advice. Factors associated with compliance were examined with logistic regression. RESULTS: CHW saw 18......,497 child visits in the moderate-to-high transmission setting and referred 15.2% (2815/18,497) of all visits; in the low-transmission setting, 35.0% (1135/3223) of all visits were referred. Compliance to referral was low, in both settings

49 CFR 28.170 - Compliance procedures.

Science.gov (United States)

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Compliance procedures. 28.170 Section 28.170 Transportation Office of the Secretary of Transportation ENFORCEMENT OF NONDISCRIMINATION ON THE BASIS OF HANDICAP IN PROGRAMS OR ACTIVITIES CONDUCTED BY THE DEPARTMENT OF TRANSPORTATION § 28.170 Compliance...

Materials Handling. Module SH-01. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on materials handling is one of 50 modules concerned with job safety and health. It presents the procedures for safe materials handling. Discussed are manual handling methods (lifting and carrying by hand) and mechanical lifting (lifting by powered trucks, cranes or conveyors). Following the introduction, 15 objectives (each…

Enclosure for handling high activity materials abstract

International Nuclear Information System (INIS)

Jimeno de Osso, F.; Dominguez Rodriguez, G.; Cruz Castillo, F. de la; Rodriguez Esteban, A.

1977-01-01

One of the most important problems that are met at the laboratories producing and handling radioisotopes is that of designing, building and operating enclosures suitable for the safe handling of active substances. With that purpose in mind, an enclosure has been designed and built for handling moderately high activities under a shielding made of 150 mm thick lead. A description is given of those aspects that may be of interest to people working in this field. (author) [es

Mobile Source Emissions Regulatory Compliance Data Inventory

Data.gov (United States)

U.S. Environmental Protection Agency — The Mobile Source Emissions Regulatory Compliance Data Inventory data asset contains measured summary compliance information on light-duty, heavy-duty, and non-road...

Designing 3ERP to meet use and users - methods to handle cultural diversity and collaborative networking in SMEs

DEFF Research Database (Denmark)

Dirckinck-Holmfeld, Lone; Nielsen, Janni

2007-01-01

The purpose is to describe a project the aim of which is to develop and validate the scientific methodological foundation for design of user friendly and usable, flexible and configurable global Enterprise Resource Planning system for Small and Medium sized Enterprises (SMEs) which are adoptable ...... to cultural diversity and support the collaborative networking tasks embedded in 3gERP. Focus is on Human Centered Design methods and tools which must be developed to handle cultural diversity....

75 FR 70881 - Designation of a Chief Compliance Officer; Required Compliance Policies; and Annual Report of a...

Science.gov (United States)

2010-11-19

... example, partnerships and limited liability companies) that may have forms of governing bodies other than... function subject to regulation by the Commission; if a limited liability company or limited liability... chief compliance officers to administer compliance policies that include, but are not limited to, all...

Evaluating the police service quality for handling traffic crash reporting

DEFF Research Database (Denmark)

Janstrup, Kira Hyldekær; Kaplan, Sigal; Barfod, Michael Bruhn

2017-01-01

Purpose The phenomenon of traffic crash under-reporting has been extensively documented in terms of its extent, but not equally analysed in terms of its reasons. As police distrust has been recently identified as a major reason for crash under-reporting, the purpose of this paper is to look...... at the police service quality for handling the reporting of traffic crashes. Design/methodology/approach This study introduces a novel approach to evaluate service quality that combines multi-criteria decision analysis (MCDA) with latent class analysis (LCA). Moreover, this study presents the design of a web......-based survey on the basis of the SERVQUAL approach to detecting strengths, opportunities and threats with crash reporting to the police at a strategic level. Transportation stakeholders (e.g. researchers, authorities, consultants, NGO representatives, suppliers) with an interest in traffic safety in Denmark...

Federal Facilities Compliance Act, Draft Site Treatment Plan: Compliance Plan Volume. Part 2, Volume 2

International Nuclear Information System (INIS)

1994-01-01

This document presents the details of the implementation of the Site Treatment Plan developed by Ames Laboratory in compliance with the Federal Facilities Compliance Act. Topics discussed in this document include: implementation of the plan; milestones; annual updates to the plan; inclusion of new waste streams; modifications of the plan; funding considerations; low-level mixed waste treatment plan and schedules; and TRU mixed waste streams

Compliance with the workplace-smoking ban in the Netherlands.

Science.gov (United States)

Verdonk-Kleinjan, Wendy M I; Rijswijk, Pieter C P; de Vries, Hein; Knibbe, Ronald A

2013-02-01

In 2004 the Dutch government instituted a workplace-smoking ban. This study focuses on differences in compliance over time and between occupational sectors, and describes the background variables. Telephone interviews were conducted with company employees across industry, public and service sectors in 2004 (n=705), 2006 (n=2201) and 2008 (n=2034). The questions concerned smoking policy, aspects of awareness and motivation to implement this ban. Compliance rates increased between 2006 (83%) and 2008 (96%) after an initial stagnation in the rate of compliance between 2004 and 2006. The increase in compliance was accompanied by a less negative attitude and an increase in confidence in one's ability to comply (self-efficacy). Differences in compliance between sectors with the highest compliance (public sector) and the lowest compliance (industry) decreased from about 20% to nearly 4%. Simultaneously, in the industry there was a stronger increase for risk perception of enforcement, social influence and self-efficacy. The initial stagnation in increase of compliance might be due to the lack of a (new) coherent package of policy measures to discourage smoking. Over the entire period there was a stronger increase in compliance in the industry sector, probably due to the intensification of enforcement activities and additional policy like legislation, which might increase awareness and social support. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Development of tritium-handling technique

International Nuclear Information System (INIS)

Ohmura, Hiroshi; Hosaka, Akio; Okamoto, Takahumi

1988-01-01

The overview of developing activities for tritium-handling techniques in IHI are presented. To establish a fusion power plant, tritium handling is one of the key technologies. Recently in JAERI, conceptual design of FER (Fusion Experimental Reactor) has been carried out, and the FER system requires a processing system for a large amount of tritium. IHI concentrate on investigation of fuel gas purification, isotope separation and storage systems under contract with Toshiba Corporation. Design results of the systems and each components are reviewed. IHI has been developing fundamental handling techniques which are the ZrNi bed for hydrogen isotope storage and isotope separation by laser. The ZrNi bed with a tritium storage capacity of 1000 Ci has been constructed and recovery capability of the hydrogen isotope until 10 -4 Torr {0.013 Pa} was confirmed. In laser isotope separation, the optimum laser wave length has been determined. (author)

Handling of waste in ports

International Nuclear Information System (INIS)

Olson, P.H.

1994-01-01

The regulations governing the handling of port-generated waste are often national and/or local legislation, whereas the handling of ship-generated waste is governed by the MARPOL Convention in most parts of the world. The handling of waste consists of two main phases -collection and treatment. Waste has to be collected in every port and on board every ship, whereas generally only some wastes are treated and to a certain degree in ports and on board ships. This paper considers the different kinds of waste generated in both ports and on board ships, where and how it is generated, how it could be collected and treated. The two sources are treated together to show how some ship-generated waste may be treated in port installations primarily constructed for the treatment of the port-generated waste, making integrated use of the available treatment facilities. (author)

Magnetic resonance imaging of meniscal bucket-handle tears

International Nuclear Information System (INIS)

Dfouni, N.; Garcia, J.; Kindynis, Ph.; Bosson, D.

1997-01-01

To define MR signs of meniscal bucket-handle tears and evaluate the diagnostic efficiency of this technique. Retrospective study of 30 patients with a meniscal bucket-handle tear and 30 with a different type of tear, all proven by arthroscopy. The following MR signs of a bucket-handle tear were evaluated: 'separate meniscal fragment, 'double posterior cruciate ligament', 'snake sign' and 'double anterior horn'. A correct diagnosis of a bucket-handle tear was only made in 18/30 of patients. Several of the MR signs were seen in the same patient in 17 cases. A double posterior cruciate ligament was present only in cases of medial meniscus tears. The 12 menisci without these signs, and therefore not diagnosed as bucket-handle tears, were all classified as meniscal tears on the basis of signal extending to the meniscal surface. Nine of these were not displaced into the inter-condylar notch at arthroscopy. The interobserver agreement was excellent: kappa 0.88. The diagnosis of a bucket-handle meniscal tear, if it is displaced, can be made when one or more of the four MR evaluated signs are present. Other forms of meniscal tears are only exceptionally diagnosed as bucket-handle tears. (authors)

30 CFR 90.207 - Compliance sampling.

Science.gov (United States)

2010-07-01

... MANDATORY HEALTH STANDARDS-COAL MINERS WHO HAVE EVIDENCE OF THE DEVELOPMENT OF PNEUMOCONIOSIS Sampling Procedures § 90.207 Compliance sampling. (a) The operator shall take five valid respirable dust samples for... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Compliance sampling. 90.207 Section 90.207...

5 CFR 900.406 - Compliance information.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Compliance information. 900.406 Section... Compliance information. (a) Cooperation and assistance. OPM, to the fullest extent practicable, shall seek... at the times, and in the form and containing the information OPM may determine necessary to enable it...

49 CFR 27.121 - Compliance information.

Science.gov (United States)

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Compliance information. 27.121 Section 27.121 Transportation Office of the Secretary of Transportation NONDISCRIMINATION ON THE BASIS OF DISABILITY IN PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Enforcement § 27.121 Compliance information. (a) Cooperation and assistance. The...

How to Handle Impasses in Bargaining.

Science.gov (United States)

Durrant, Robert E.

Guidelines in an outline format are presented to school board members and administrators on how to handle impasses in bargaining. The following two rules are given: there sometimes may be strikes, but there always will be settlements; and on the way to settlements, there always will be impasses. Suggestions for handling impasses are listed under…

Hybrid Risk Management Methodology: A Case Study

Directory of Open Access Journals (Sweden)

Jacky Siu-Lun Ting

2009-10-01

Full Text Available Risk management is a decision-making process involving considerations of political, social, economic and engineering factors with relevant risk assessments relating to a potential hazard. In the last decade, a number of risk management tools are introduced and employed to manage and minimize the uncertainty and threats realization to the organizations. However, the focus of these methodologies are different; in which companies need to adopt various risk management principles to visualize a full picture of the organizational risk level. Regarding to this, this paper presents a new approach of risk management that integrates Hierarchical Holographic Modeling (HHM, Enterprise Risk Management (ERM and Business Recovery Planning (BCP for identifying and assessing risks as well as managing the consequences of realized residual risks. To illustrate the procedures of the proposed methodology, a logistic company ABC Limited is chosen to serve as a case study Through applying HHM and ERM to investigate and assess the risk, ABC Limited can be better evaluated the potential risks and then took the responsive actions (e.g. BCP to handle the risks and crisis in near future.

The role of patient isolation and compliance with isolation practices in the control of nosocomial MRSA in acute care.

Science.gov (United States)

Halcomb, Elizabeth J; Griffiths, Rhonda; Fernandez, Ritin

2008-06-01

methodological quality, care must be taken when interpreting the review findings. There is some evidence that cessation of single room isolation and cohorting of MRSA patients does not increase nosocomial MRSA transmission when hand-washing compliance and standard precautions are maintained. Indeed, there is some evidence that reduced MRSA transmission can be achieved by improving compliance with contact precautions alone. The low level of hand hygiene compliance reported in the literature suggests that staff compliance with isolation practices is a significant factor in evaluating any infection-controlled intervention in the clinical setting. While staff compliance data are conflicting, regular audit and feedback of performance may improve compliance. Implications for clinical practice  The heterogeneous nature of the topic and methodological weaknesses of included studies impairs the ability to aggregate data and develop specific practice recommendations. While this review presents evidence to suggest that ceasing single room or cohort isolation does not lead to increased MRSA transmission, these studies maintained high levels of hand hygiene or standard precautions. Additionally, the role of extraneous factors, such as environmental reservoirs, specific MRSA strains and patient mix, is unclear. None of the included studies measured financial, social or psychological factors associated with isolation practices. There is an urgent need for well-designed research with significant sample sizes to develop an evidence base upon which to underpin future clinical practice. © 2008 The Authors. Journal Compilation © Blackwell Publishing Asia Pty Ltd.

Design Methodology of Process Layout considering Various Equipment Types for Large scale Pyro processing Facility

International Nuclear Information System (INIS)

Yu, Seung Nam; Lee, Jong Kwang; Lee, Hyo Jik

2016-01-01

At present, each item of process equipment required for integrated processing is being examined, based on experience acquired during the Pyropocess Integrated Inactive Demonstration Facility (PRIDE) project, and considering the requirements and desired performance enhancement of KAPF as a new facility beyond PRIDE. Essentially, KAPF will be required to handle hazardous materials such as spent nuclear fuel, which must be processed in an isolated and shielded area separate from the operator location. Moreover, an inert-gas atmosphere must be maintained, because of the radiation and deliquescence of the materials. KAPF must also achieve the goal of significantly increased yearly production beyond that of the previous facility; therefore, several parts of the production line must be automated. This article presents the method considered for the conceptual design of both the production line and the overall layout of the KAPF process equipment. This study has proposed a design methodology that can be utilized as a preliminary step for the design of a hot-cell-type, large-scale facility, in which the various types of processing equipment operated by the remote handling system are integrated. The proposed methodology applies to part of the overall design procedure and contains various weaknesses. However, if the designer is required to maximize the efficiency of the installed material-handling system while considering operation restrictions and maintenance conditions, this kind of design process can accommodate the essential components that must be employed simultaneously in a general hot-cell system

Corporate compliance: framework and implementation.

Science.gov (United States)

Fowler, N

1999-01-01

The federal government has created numerous programs to combat fraud and abuse. The government now encourages healthcare facilities to have a corporate compliance program (CCP), a plan that reduces the chances that the facility will violate laws or regulations. A CCP is an organization-wide program comprised of a code of conduct and written policies, internal monitoring and auditing standards, employee training, feedback mechanisms and other features, all designed to prevent and detect violations of governmental laws, regulations and policies. It is a system or method ensuring that employees understand and will comply with laws that apply to what they do every day. Seven factors, based on federal sentencing guidelines, provide the framework for developing a CCP. First, a facility must establish rules that are reasonably capable of reducing criminal conduct. Second, high-level personnel must oversee the compliance effort. Third, a facility must use due care in delegating authority in the compliance initiative. Fourth, standards must be communicated effectively to employees, and fifth, a facility must take reasonable steps to achieve compliance. Sixth, standards must be enforced consistently across the organization and last, standards must be modified or changed for reported concerns, to ensure they are not repeated. PROMINA Health System, Inc. in Atlanta, Ga., designed a program to meet federal guidelines. It started with a self-assessment to define its areas or risk. Next, it created the internal structure and assigned organizational responsibility for running the CCP. PROMINA then developed standards of business and professional conduct, established vehicles of communication and trained employees on the standards. Finally, it continues to develop evidence of the program's effectiveness by monitoring and documenting its compliance activities.

14 CFR 417.23 - Compliance monitoring.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Compliance monitoring. 417.23 Section 417... Compliance monitoring. (a) A launch operator must allow access by, and cooperate with, Federal officers or... launch operator must provide the FAA with a console for monitoring the progress of the countdown and...

45 CFR 80.6 - Compliance information.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Compliance information. 80.6 Section 80.6 Public... THE CIVIL RIGHTS ACT OF 1964 § 80.6 Compliance information. (a) Cooperation and assistance. The... reports at such times, and in such form and containing such information, as the responsible Department...

Compliance to two city convenience store ordinance requirements.

Science.gov (United States)

Chaumont Menéndez, Cammie K; Amandus, Harlan E; Wu, Nan; Hendricks, Scott A

2016-04-01

Robbery-related homicides and assaults are the leading cause of death in retail businesses. Robbery reduction approaches focus on compliance to Crime Prevention Through Environmental Design (CPTED) guidelines. We evaluated the level of compliance to CPTED guidelines specified by convenience store safety ordinances effective in 2010 in Dallas and Houston, Texas, USA. Convenience stores were defined as businesses less than 10 000 square feet that sell grocery items. Store managers were interviewed for store ordinance requirements from August to November 2011, in a random sample of 594 (289 in Dallas, 305 in Houston) convenience stores that were open before and after the effective dates of their city's ordinance. Data were collected in 2011 and analysed in 2012-2014. Overall, 9% of stores were in full compliance, although 79% reported being registered with the police departments as compliant. Compliance was consistently significantly higher in Dallas than in Houston for many requirements and by store type. Compliance was lower among single owner-operator stores compared with corporate/franchise stores. Compliance to individual requirements was lowest for signage and visibility. Full compliance to the required safety measures is consistent with industry 'best practices' and evidence-based workplace violence prevention research findings. In Houston and Dallas compliance was higher for some CPTED requirements but not the less costly approaches that are also the more straightforward to adopt. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

WASTE HANDLING BUILDING FIRE PROTECTION SYSTEM DESCRIPTION DOCUMENT

Energy Technology Data Exchange (ETDEWEB)

J. D. Bigbee

2000-06-21

The Waste Handling Building Fire Protection System provides the capability to detect, control, and extinguish fires and/or mitigate explosions throughout the Waste Handling Building (WHB). Fire protection includes appropriate water-based and non-water-based suppression, as appropriate, and includes the distribution and delivery systems for the fire suppression agents. The Waste Handling Building Fire Protection System includes fire or explosion detection panel(s) controlling various detectors, system actuation, annunciators, equipment controls, and signal outputs. The system interfaces with the Waste Handling Building System for mounting of fire protection equipment and components, location of fire suppression equipment, suppression agent runoff, and locating fire rated barriers. The system interfaces with the Waste Handling Building System for adequate drainage and removal capabilities of liquid runoff resulting from fire protection discharges. The system interfaces with the Waste Handling Building Electrical Distribution System for power to operate, and with the Site Fire Protection System for fire protection water supply to automatic sprinklers, standpipes, and hose stations. The system interfaces with the Site Fire Protection System for fire signal transmission outside the WHB as needed to respond to a fire emergency, and with the Waste Handling Building Ventilation System to detect smoke and fire in specific areas, to protect building high-efficiency particulate air (HEPA) filters, and to control portions of the Waste Handling Building Ventilation System for smoke management and manual override capability. The system interfaces with the Monitored Geologic Repository (MGR) Operations Monitoring and Control System for annunciation, and condition status.

WASTE HANDLING BUILDING FIRE PROTECTION SYSTEM DESCRIPTION DOCUMENT

International Nuclear Information System (INIS)

J. D. Bigbee

2000-01-01

The Waste Handling Building Fire Protection System provides the capability to detect, control, and extinguish fires and/or mitigate explosions throughout the Waste Handling Building (WHB). Fire protection includes appropriate water-based and non-water-based suppression, as appropriate, and includes the distribution and delivery systems for the fire suppression agents. The Waste Handling Building Fire Protection System includes fire or explosion detection panel(s) controlling various detectors, system actuation, annunciators, equipment controls, and signal outputs. The system interfaces with the Waste Handling Building System for mounting of fire protection equipment and components, location of fire suppression equipment, suppression agent runoff, and locating fire rated barriers. The system interfaces with the Waste Handling Building System for adequate drainage and removal capabilities of liquid runoff resulting from fire protection discharges. The system interfaces with the Waste Handling Building Electrical Distribution System for power to operate, and with the Site Fire Protection System for fire protection water supply to automatic sprinklers, standpipes, and hose stations. The system interfaces with the Site Fire Protection System for fire signal transmission outside the WHB as needed to respond to a fire emergency, and with the Waste Handling Building Ventilation System to detect smoke and fire in specific areas, to protect building high-efficiency particulate air (HEPA) filters, and to control portions of the Waste Handling Building Ventilation System for smoke management and manual override capability. The system interfaces with the Monitored Geologic Repository (MGR) Operations Monitoring and Control System for annunciation, and condition status

Quinone-induced protein handling changes: Implications for major protein handling systems in quinone-mediated toxicity

International Nuclear Information System (INIS)

Xiong, Rui; Siegel, David; Ross, David

2014-01-01

Para-quinones such as 1,4-Benzoquinone (BQ) and menadione (MD) and ortho-quinones including the oxidation products of catecholamines, are derived from xenobiotics as well as endogenous molecules. The effects of quinones on major protein handling systems in cells; the 20/26S proteasome, the ER stress response, autophagy, chaperone proteins and aggresome formation, have not been investigated in a systematic manner. Both BQ and aminochrome (AC) inhibited proteasomal activity and activated the ER stress response and autophagy in rat dopaminergic N27 cells. AC also induced aggresome formation while MD had little effect on any protein handling systems in N27 cells. The effect of NQO1 on quinone induced protein handling changes and toxicity was examined using N27 cells stably transfected with NQO1 to generate an isogenic NQO1-overexpressing line. NQO1 protected against BQ–induced apoptosis but led to a potentiation of AC- and MD-induced apoptosis. Modulation of quinone-induced apoptosis in N27 and NQO1-overexpressing cells correlated only with changes in the ER stress response and not with changes in other protein handling systems. These data suggested that NQO1 modulated the ER stress response to potentiate toxicity of AC and MD, but protected against BQ toxicity. We further demonstrated that NQO1 mediated reduction to unstable hydroquinones and subsequent redox cycling was important for the activation of the ER stress response and toxicity for both AC and MD. In summary, our data demonstrate that quinone-specific changes in protein handling are evident in N27 cells and the induction of the ER stress response is associated with quinone-mediated toxicity. - Highlights: • Unstable hydroquinones contributed to quinone-induced ER stress and toxicity

Quinone-induced protein handling changes: Implications for major protein handling systems in quinone-mediated toxicity

Energy Technology Data Exchange (ETDEWEB)

Xiong, Rui; Siegel, David; Ross, David, E-mail: david.ross@ucdenver.edu

2014-10-15

Para-quinones such as 1,4-Benzoquinone (BQ) and menadione (MD) and ortho-quinones including the oxidation products of catecholamines, are derived from xenobiotics as well as endogenous molecules. The effects of quinones on major protein handling systems in cells; the 20/26S proteasome, the ER stress response, autophagy, chaperone proteins and aggresome formation, have not been investigated in a systematic manner. Both BQ and aminochrome (AC) inhibited proteasomal activity and activated the ER stress response and autophagy in rat dopaminergic N27 cells. AC also induced aggresome formation while MD had little effect on any protein handling systems in N27 cells. The effect of NQO1 on quinone induced protein handling changes and toxicity was examined using N27 cells stably transfected with NQO1 to generate an isogenic NQO1-overexpressing line. NQO1 protected against BQ–induced apoptosis but led to a potentiation of AC- and MD-induced apoptosis. Modulation of quinone-induced apoptosis in N27 and NQO1-overexpressing cells correlated only with changes in the ER stress response and not with changes in other protein handling systems. These data suggested that NQO1 modulated the ER stress response to potentiate toxicity of AC and MD, but protected against BQ toxicity. We further demonstrated that NQO1 mediated reduction to unstable hydroquinones and subsequent redox cycling was important for the activation of the ER stress response and toxicity for both AC and MD. In summary, our data demonstrate that quinone-specific changes in protein handling are evident in N27 cells and the induction of the ER stress response is associated with quinone-mediated toxicity. - Highlights: • Unstable hydroquinones contributed to quinone-induced ER stress and toxicity.

Handling Kids in Crisis with Care

Science.gov (United States)

Bushinski, Cari

2018-01-01

The Handle with Care program helps schools help students who experience trauma. While at the scene of an event like a domestic violence call, drug raid, or car accident, law enforcement personnel determine the names and school of any children present. They notify that child's school to "handle ___ with care" the next day, and the school…

Survey of tritiated oil sources and handling practices

International Nuclear Information System (INIS)

Miller, J.M.

1994-08-01

Tritium interactions with oil sources (primarily associated with pumps) in tritium-handling facilities can lead to the incorporation of tritium in the oil and the production of tritiated hydrocarbons. This results in a source of radiological hazard and the need for special handling considerations during maintenance, decontamination, decommissioning and waste packaging and storage. The results of a general survey of tritiated-oil sources and their associated characteristics, handling practices, analysis techniques and waste treatment/storage methods are summarized here. Information was obtained from various tritium-handling laboratories, fusion devices, and CANDU plants. 38 refs., 1 fig

Effects of handling on fear reactions in young Icelandic horses

DEFF Research Database (Denmark)

Marsbøll, Anna Feldberg; Christensen, Janne Winther

2015-01-01

To investigate the effect of a short-term standardised handling procedure on reactions of young horses in 2 types of fear tests (including and excluding human handling). Study design An experimental study with 3-year-old Icelandic horses (n = 24). Methods Handled horses (n = 12) were trained according...... to a standardised handling procedure whereas controls (n = 12) remained untrained. Behavioural and heart rate responses in a novel object test and 2 handling fear tests (HFTs) were measured. The HFTs were conducted with both an unknown (HFT-unknown) and a known handler (HFT-known). Results There was no effect...... correlated significantly between tests. Conclusions Previous handling may affect the behavioural fear response of horses when handled by their usual handler, whereas this effect did not apply to an unknown handler. Heart rates appeared unaffected by handling and may be a more reliable indicator...

Report: ECHO Data Quality Audit – Phase I Results: The Integrated Compliance Information System Needs Security Controls to Protect Significant Non-Compliance Data

Science.gov (United States)

Report #09-P-0226, August 31, 2009. End users of the Permit Compliance System and Integrated Compliance Information System National Pollutant Discharge Elimination System can override the Significant Non-Compliance data field without more access controls.

22 CFR 141.5 - Compliance information.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Compliance information. 141.5 Section 141.5... DEPARTMENT OF STATE-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 § 141.5 Compliance information... such information, as a responsible Departmental official or his designee may determine to be necessary...

49 CFR 21.9 - Compliance information.

Science.gov (United States)

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Compliance information. 21.9 Section 21.9 Transportation Office of the Secretary of Transportation NONDISCRIMINATION IN FEDERALLY-ASSISTED PROGRAMS OF THE DEPARTMENT OF TRANSPORTATION-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 § 21.9 Compliance information. (a) Cooperation and...

The impact of an automated dose-dispensing scheme on user compliance, medication understanding, and medication stockpiles

DEFF Research Database (Denmark)

Larsen, Anna Bira; Haugbølle, Lotte Stig

2007-01-01

the assumed user benefits. Neither Danish nor international studies dealt with users' perspective on ADD in general or with respect to the pinpointed benefits, and thus exploration was needed. OBJECTIVES: The objective of this article is to respond to the following research question: How does ADD affect users......' handling and consumption of medication in terms of compliance behavior, and how does the assumption of user benefits made by health professionals and legislators measure up to users' experiences with ADD? METHODS: The results built on a secondary analysis of 9 qualitative interviews with a varied selection...... understanding, nor does it automatically eliminate stockpiles of old medication in users' homes. The gap between the perspectives of users and health professionals makes a compelling case for considering users' voices in the development and implementation of future health technologies....

Accelerators: radiation safety and regulatory compliance

International Nuclear Information System (INIS)

Bandyopadhyay, Tapas

2013-01-01

Growth of accelerators, both positive ions and electron, is very high in India. This may be because of the wide acceptance of these machines in the industrial purposes, medical uses, material science studies, upcoming ADSS facility and many other reasons. Most of cases for societal uses, accelerators have to be installed in the dense public domain. Accelerators for basic research and development purposes to be installed may in public domain or in isolated site. These accelerators are to be classified into different categories in terms of regulatory compliance. Radiation shield design, HVAC system required to be in place with design so that the dose and effluent discharge in the public domain is within a limit considering different pathways. INDUS I and II at Indore, K-130 and K500 machine at VECC, Pelletron at TIFR, IUAC, BARC, EBC at Mumbai are in operation. Apart from this accelerators, a series of medical accelerators in operation and yet to be operational which are generally producing PET isotopes for the diagnosis purposes. VECC is aiming to operate 30 MeV proton machine with about 500 μA beam current for the production of PET, SPECT isotopes for diagnosis purposes and also therapeutic use in near future. Detail requirement in terms of choice of sites, source term estimation for achieving optimum shield thickness, ventilation system, site layout and planning , radioactive effluent handling both gaseous and liquid, decommission aspects will be discussed. (author)

Electronic publishing and information handling: Plenty of roses, but also some thorns

Science.gov (United States)

Heck, André

The current dramatic evolution in information technology is bringing major modifications in the way scientists communicate. The concept of 'electronic publishing' is too restrictive and has often different, sometimes conflicting, interpretations. It is giving way to the broader notion of 'electronic information handling' encompassing the diverse types of information, the different media, as well as the various communication methodologies and technologies. New problems and challenges result also from this new information culture, especially on legal, ethical, and educational grounds. The procedures for validating 'published material' and for evaluating scientific activities will have to be adjusted too. 'Fluid' information is becoming an omnipresent reality. Electronic publishing cannot be conceived without link to knowledge bases and information resources, nor without intelligent information retrieval tools.

Environmental compliance in the petrochemical industry in the Sarnia area

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-04-01

In February 2004, the Ontario Ministry of the Environment directed its Environmental SWAT Team to conduct a comprehensive inspection sweep of Sarnia's industrial sector to ensure that all facilities in that region were brought into compliance with environmental legislation. The primary focus was to inspect areas with the potential for future spills or unlawful discharges that could pose risks to human health or the environment. Legislative and regulatory gaps that could allow environmentally unsafe practices to exist at the facilities were also revealed. The inspection sweep involved comprehensive inspections of 35 petrochemical plant's air emissions, water discharges and spill prevention plans. SWAT officers examined waste management, laboratory operations and other areas that must meet environmental legislative requirements. Nearly all of the of facilities inspected during the sweep were found to be in non-compliance with one or more legislative or regulatory requirement. Common deficiencies included: no spill contingency or spill prevention plans; not having a Certificate of Approval for wastewater collection and treatment works or air emission control equipment; altering equipment, systems, processes, or structure contrary to the existing Certificate of Approval; and improper chemical handling, storage and identification. As a result of the inspection, 6 facilities were ordered to develop both a spill prevention plan and a spill contingency plan and 2 facilities were ordered to develop a spill prevention plan. SWAT officers have followed up to ensure that companies have taken appropriate corrective actions. The inspection revealed some of the sound practices undertaken at some facilities, such as containment; monitoring; prevention of discharge of contaminants to air or water; waste water and storm water treatment; contingency planning; and process hazard analysis of all key processes. refs., tabs., figs.

Influence of Self-Efficacy on Compliance to Workplace Exercise

DEFF Research Database (Denmark)

Pedersen, Mette Merete; Zebis, Mette K; Jørgensen, Henning Langberg

2013-01-01

the influence of exercise-specific self-efficacy on compliance to workplace physical exercise. PURPOSE: To determine the influence of exercise-specific self-efficacy on compliance to specific strength exercises during working hours for laboratory technicians. METHODS: We performed a cluster...... of compliance to exercises during 20 weeks, but found self-efficacy to be a predictor of compliance in a private sector setting. Workplace-specific differences might be present and should be taken into account....

Handling wood shavings

Energy Technology Data Exchange (ETDEWEB)

1974-09-18

Details of bulk handling equipment suitable for collection and compressing wood waste from commercial joinery works are discussed. The Redler Bin Discharger ensures free flow of chips from storage silo discharge prior to compression into briquettes for use as fuel or processing into chipboard.

On the quality of compliance mechanisms in the Kyoto Protocol

International Nuclear Information System (INIS)

Nentjes, Andries; Klaassen, Ger

2004-01-01

In this paper we evaluate the compliance mechanisms in the Kyoto Protocol as agreed at the seventh Conference of Parties to the United Nations Framework Convention on Climate Change (UNFCCC) in Marrakech. We differ from the literature since we concentrate on the complete set of compliance rules agreed in Marrakech and, as a new element, we systematically discuss these compliance incentives in conjunction with the implicit compliance incentives: reputation protection, emission trading and banking. We conclude that effectiveness and efficiency go hand in hand for all explicit and implicit compliance incentives except one--emission trading. Trading improves efficiency but this can also occur at the cost of increasing non-compliance

Handling of bulk solids theory and practice

CERN Document Server

Shamlou, P A

1990-01-01

Handling of Bulk Solids provides a comprehensive discussion of the field of solids flow and handling in the process industries. Presentation of the subject follows classical lines of separate discussions for each topic, so each chapter is self-contained and can be read on its own. Topics discussed include bulk solids flow and handling properties; pressure profiles in bulk solids storage vessels; the design of storage silos for reliable discharge of bulk materials; gravity flow of particulate materials from storage vessels; pneumatic transportation of bulk solids; and the hazards of solid-mater

Torus sector handling system

International Nuclear Information System (INIS)

Grisham, D.L.

1981-01-01

A remote handling system is proposed for moving a torus sector of the accelerator from under the cryostat to a point where it can be handled by a crane and for the reverse process for a new sector. Equipment recommendations are presented, as well as possible alignment schemes. Some general comments about future remote-handling methods and the present capabilities of existing systems will also be included. The specific task to be addressed is the removal and replacement of a 425 to 450 ton torus sector. This requires a horizontal movement of approx. 10 m from a normal operating position to a point where its further transport can be accomplished by more conventional means (crane or floor transporter). The same horizontal movement is required for reinstallation, but a positional tolerance of 2 cm is required to allow reasonable fit-up for the vacuum seal from the radial frames to the torus sector. Since the sectors are not only heavy but rather tall and narrow, the transport system must provide a safe, stable, and repeatable method fo sector movement. This limited study indicates that the LAMPF-based method of transporting torus sectors offers a proven method of moving heavy items. In addition, the present state of the art in remote equipment is adequate for FED maintenance

Methodological guidelines for developing accident modification functions

DEFF Research Database (Denmark)

Elvik, Rune

2015-01-01

This paper proposes methodological guidelines for developing accident modification functions. An accident modification function is a mathematical function describing systematic variation in the effects of road safety measures. The paper describes ten guidelines. An example is given of how to use...... limitations in developing accident modification functions are the small number of good evaluation studies and the often huge variation in estimates of effect. It is therefore still not possible to develop accident modification functions for very many road safety measures. © 2015 Elsevier Ltd. All rights...... the guidelines. The importance of exploratory analysis and an iterative approach in developing accident modification functions is stressed. The example shows that strict compliance with all the guidelines may be difficult, but represents a level of stringency that should be strived for. Currently the main...

Software for handling and replacement of missing data

Directory of Open Access Journals (Sweden)

Mayer, Benjamin

2009-10-01

Full Text Available In medical research missing values often arise in the course of a data analysis. This fact constitutes a problem for different reasons, so e.g. standard methods for analyzing data lead to biased estimates and a loss of statistical power due to missing values, since those methods require complete data sets and therefore omit incomplete cases for the analyses. Furthermore missing values imply a certain loss of information for what reason the validity of results of a study with missing values has to be rated less than in a case where all data had been available. For years there are methods for replacement of missing values (Rubin, Schafer to tackle these problems and solve them in parts. Hence in this article we want to present the existing software to handle and replace missing values on the one hand and give an outline about the available options to get information on the other hand. The methodological aspects of the replacement strategies are delineated just briefly in this article.

Increased arterial compliance in decompensated cirrhosis

DEFF Research Database (Denmark)

Henriksen, Jens Henrik Sahl; Møller, Søren; Schifter, S

1999-01-01

of the vasodilator, calcitonin gene-related peptide (CGRP) and mean arterial blood pressure (MAP). METHODS: Arterial compliance (COMPart=deltaV/deltaP) was determined as the stroke volume relative to pulse pressure (i.e. systolic minus diastolic blood pressure) during a haemodynamic evaluation of portal hypertension......BACKGROUND/AIMS: In patients with cirrhosis, the systemic circulation is hyperdynamic with low arterial blood pressure and reduced systemic vascular resistance. The present study was undertaken to estimate the compliance of the arterial tree in relation to severity of cirrhosis, circulating level...... of CGRP (r=0.34, parterial compliance in cirrhosis is directly related to the severity of the disease and to the elevated level of circulating vasodilator peptide CGRP, and inversely related...

Getting to grips with remote handling and robotics

Energy Technology Data Exchange (ETDEWEB)

Mosey, D [Ontario Hydro, Toronto (Canada)

1984-12-01

A report on the Canadian Nuclear Society Conference on robotics and remote handling in the nuclear industry, September 1984. Remote handling in reactor operations, particularly in the Candu reactors is discussed, and the costs and benefits of use of remote handling equipment are considered. Steam generator inspection and repair is an area in which practical application of robotic technology has made a major advance.

Compliance of amblyopic patients with occlusion therapy: A pilot study

Directory of Open Access Journals (Sweden)

Sana Al-Zuhaibi

2009-01-01

Materials and Methods: A total of 31 families with a child (aged 2-12 years, undergoing unilateral amblyopia treatment at the pediatric ophthalmology clinic of Sultan Qaboos University Hospital, Oman, were recruited for this one month study. Parents were interviewed and completed a closed-ended questionnaire. Clinical data including, visual acuity, refraction, diagnosis and treatment, for each patient was collected from the hospital chart and was entered in a data collection sheet. Compliance with occlusion therapy was assessed by self-report accounts of parents and was graded into good, partial, or poor. Association between various factors and degree of compliance was studied using logistic regression modeling. Results: Only 14 (45% patients showed good compliance to occlusion therapy. 17 (55% patients were noncompliant. Improvement in visual acuity strongly correlated with compliance to patching (P = 0.008. Other variables that were studied included, age at onset of therapy; gender; degree of amblyopia; type of amblyopia; use of glasses; and compliance with glasses. These did not emerge as significant predictors of compliance. All but one family with poor compliance stated that the main challenge in following the recommendation to patch for requisite hours was in getting their child to cooperate. Only in one instance, the family cited nonavailability of patches as the main hindrance to compliance. 10/31 (32% families expressed a desire for more information and 18/31 (58% parents did not understand that amblyopia meant decreased vision. Conclusion: Poor compliance is a barrier to successful amblyopia therapy in our practice. Improvement in visual acuity is associated with better compliance with patching. Parents find it difficult to comprehend and retain verbal explanations of various components regarding occlusion therapy for amblyopia. Future study with a larger sample of patients is recommended to investigate the factors affecting compliance with amblyopia

Handling e-waste in developed and developing countries: initiatives, practices, and consequences.

Science.gov (United States)

Sthiannopkao, Suthipong; Wong, Ming Hung

2013-10-01

Discarded electronic goods contain a range of toxic materials requiring special handling. Developed countries have conventions, directives, and laws to regulate their disposal, most based on extended producer responsibility. Manufacturers take back items collected by retailers and local governments for safe destruction or recovery of materials. Compliance, however, is difficult to assure, and frequently runs against economic incentives. The expense of proper disposal leads to the shipment of large amounts of e-waste to China, India, Pakistan, Nigeria, and other developing countries. Shipment is often through middlemen, and under tariff classifications that make quantities difficult to assess. There, despite the intents of national regulations and hazardous waste laws, most e-waste is treated as general refuse, or crudely processed, often by burning or acid baths, with recovery of only a few materials of value. As dioxins, furans, and heavy metals are released, harm to the environment, workers, and area residents is inevitable. The faster growth of e-waste generated in the developing than in the developed world presages continued expansion of a pervasive and inexpensive informal processing sector, efficient in its own way, but inherently hazard-ridden. Copyright © 2012 Elsevier B.V. All rights reserved.

Risking existence: The experience and handling of depression.

Science.gov (United States)

Bygstad-Landro, Marte; Giske, Tove

2018-02-01

To gain insight into how people suffering from depression experience and manage life. Depression is the leading cause of incapacitation and constitutes the second largest healthcare burden worldwide, causing considerable discomfort for depression sufferers and their significant others. Depression must be understood against the backdrop of a person's context as well as biological, psychological and social factors. While various studies have been conducted on the process of depression, only a few studies have examined its existential aspects. A classical grounded theory methodology employing open and selective coding was used to identify the participants' main concern and the strategies they used to handle it. Data were collected in 2015-2016 during 18 in-depth interviews with people with current or former moderate depression. The data were analysed through constant comparisons until the grounded theory emerged. The main concern of the participants was Longing for belonging, and they handled their depression through a process named Risking existence. The process comprised four phases: (i) Ungraspable processing; (ii) Giving clues; (iii) Daring dependence; and (iv) Courage to be. The process of risking existence was accompanied from beginning to end by three essentials: to hope, to endure and shame. Working in mental health care involves encountering the pain, suffering and despair that humans endure. This challenges nurses to go beyond the symptoms and to listen for their meaning to each individual person. The grounded theory of risking existence provides a model by which nurses can orient themselves when working with people who are depressed. Each phase describes different strategies that patients use that can help the nurse recognise what is going on, thus enabling him or her to understand and guide his or her patients. © 2017 John Wiley & Sons Ltd.

A Methodology to Implement an Information Security Management System

Directory of Open Access Journals (Sweden)

Alaíde Barbosa Martins

2005-08-01

Full Text Available Information security has actually been a major challenge to most organizations. Indeed, information security is an ongoing risk management process that covers all of the information that needs to be protected. ISO 17799 offers what companies need in order to better manage information security. The best way to implement this standard is to ease the security management process using a methodology that will define will define guidelines, procedures and tools that will be needed along the way. Hence, this paper proposes a methodology to assist companies in assessing their compliance with BS 7799/ ISO 17799 as well as planning and implementing the actions necessary to become compliant or certified to the standard. The concepts and ideas presented here had been applied in a case study involving the Cetrel S/A - Company of Environmental Protection. For this company, responsible for treatment of industrial residues generated by the Camaçari Petrochemical Complex and adjacent areas, to assure confidentiality and integrity of customers' data is a basic requirement.

Methodology Declassification of Impacted Buildings. Application of Technology MARSSIM

International Nuclear Information System (INIS)

Vico, A.M.; Álvarez, A.; Gómez, J.M.; Quiñones, J.

2015-01-01

This work describes the material measurement methodology to assure the absence of contamination on impacted buildings due to processes related to the first part of the nuclear fuel cycle performed at the former Junta de Energía Nuclear, JEN, currently Centro de Investigaciones Energéticas Medioambientales y Tecnológicas, CIEMAT. The first part of the work encloses the identification and quantification of natural isotopes and its proportion in the studied surfaces through different analytical techniques. The experimental study has involved the proper equipment selection to carry out the field measurement and the characterization of uranium isotopes and their immediate descendants. According to European Union recommendations and specifications established by CSN (Consejo de Seguridad Nuclear), Spanish Regulatory authorities, for CIEMAT, the surface activity reference level have been established, which allow to decide if a surface can be classified as a conventional surface. In order to make decisions about the compliance with the established clearance criteria, MARSSIM methodology is applied by using the results obtained from field measurements (impacted and non impacted surfaces).

Problematika compliance ve vybraném podniku

OpenAIRE

Kalová, Kristýna

2009-01-01

My bachelor work deals implementation of Compliance in real business companies. In this work is explained the idea of Compliance, corporate social responsibility, environmental policy and term of Stakeholders. On the frequent examples are shown methods of enterprise corruption.

Handling knowledge on osteoporosis - a qualitative study

DEFF Research Database (Denmark)

Nielsen, Dorthe; Huniche, Lotte; Brixen, Kim

2013-01-01

Scand J Caring Sci; 2012 Handling knowledge on osteoporosis - a qualitative study The aim of this qualitative study was to increase understanding of the importance of osteoporosis information and knowledge for patients' ways of handling osteoporosis in their everyday lives. Interviews were...

UNCERTAINTY HANDLING IN DISASTER MANAGEMENT USING HIERARCHICAL ROUGH SET GRANULATION

Directory of Open Access Journals (Sweden)

H. Sheikhian

2015-08-01

Full Text Available Uncertainty is one of the main concerns in geospatial data analysis. It affects different parts of decision making based on such data. In this paper, a new methodology to handle uncertainty for multi-criteria decision making problems is proposed. It integrates hierarchical rough granulation and rule extraction to build an accurate classifier. Rough granulation provides information granules with a detailed quality assessment. The granules are the basis for the rule extraction in granular computing, which applies quality measures on the rules to obtain the best set of classification rules. The proposed methodology is applied to assess seismic physical vulnerability in Tehran. Six effective criteria reflecting building age, height and material, topographic slope and earthquake intensity of the North Tehran fault have been tested. The criteria were discretized and the data set was granulated using a hierarchical rough method, where the best describing granules are determined according to the quality measures. The granules are fed into the granular computing algorithm resulting in classification rules that provide the highest prediction quality. This detailed uncertainty management resulted in 84% accuracy in prediction in a training data set. It was applied next to the whole study area to obtain the seismic vulnerability map of Tehran. A sensitivity analysis proved that earthquake intensity is the most effective criterion in the seismic vulnerability assessment of Tehran.

A shipboard comparison of analytic methods for ballast water compliance monitoring

Science.gov (United States)

Bradie, Johanna; Broeg, Katja; Gianoli, Claudio; He, Jianjun; Heitmüller, Susanne; Curto, Alberto Lo; Nakata, Akiko; Rolke, Manfred; Schillak, Lothar; Stehouwer, Peter; Vanden Byllaardt, Julie; Veldhuis, Marcel; Welschmeyer, Nick; Younan, Lawrence; Zaake, André; Bailey, Sarah

2018-03-01

Promising approaches for indicative analysis of ballast water samples have been developed that require study in the field to examine their utility for determining compliance with the International Convention for the Control and Management of Ships' Ballast Water and Sediments. To address this gap, a voyage was undertaken on board the RV Meteor, sailing the North Atlantic Ocean from Mindelo (Cape Verde) to Hamburg (Germany) during June 4-15, 2015. Trials were conducted on local sea water taken up by the ship's ballast system at multiple locations along the trip, including open ocean, North Sea, and coastal water, to evaluate a number of analytic methods that measure the numeric concentration or biomass of viable organisms according to two size categories (≥ 50 μm in minimum dimension: 7 techniques, ≥ 10 μm and scientific approaches (e.g. flow cytometry). Several promising indicative methods were identified that showed high correlation with microscopy, but allow much quicker processing and require less expert knowledge. This study is the first to concurrently use a large number of analytic tools to examine a variety of ballast water samples on board an operational ship in the field. Results are useful to identify the merits of each method and can serve as a basis for further improvement and development of tools and methodologies for ballast water compliance monitoring.

Environmental compliance considerations for the management of cultural resources

International Nuclear Information System (INIS)

Curtis, S.A.; Whitfield, S.; McGinnis, K.

1987-01-01

This paper examines three key considerations underlying the programmatic management of cultural resources that may be affected by a large federal project. These considerations are statutory background and the compliance process, cultural resource compliance tasks, and quality assurance. The first consideration addresses the legal requirements and steps that must be met and taken for federal agencies to fulfill their cultural resource compliance responsibilities. The second consideration focuses on the tasks that must be performed by technical specialists to facilitate related federal and state compliance actions. The third consideration ensures that compliance requirements are being properly fulfilled. In the technical literature and compliance planning, archaeological and historic sites and Native American cultural resources are grouped under the general heading of cultural resources. Also included under this heading are the traditions and resources of Folk societies. Cultural resources encompass both material and nonmaterial aspects of our cultural heritage and include buildings, structures, objects, sites, districts, archaeological resources, places of religious importance, and unique, distinctive, or unusual lifeways. For compliance purposes, it is useful to treat these resources within four roughly chronological culture-historical periods: prehistoric, ethnohistoric, historic, and contemporary. 6 refs., 6 tabs

Redefining NHS complaint handling--the real challenge.

Science.gov (United States)

Seelos, L; Adamson, C

1994-01-01

More and more organizations find that a constructive and open dialogue with their customers can be an effective strategy for building long-term customer relations. In this context, it has been recognized that effective complaint-contact handling can make a significant contribution to organizations' attempts to maximize customer satisfaction and loyalty. Within the NHS, an intellectual awareness exists that effective complaint/contact handling can contribute to making services more efficient and cost-effective by developing customer-oriented improvement initiatives. Recent efforts have focused on redefining NHS complaint-handling procedures to make them more user-friendly and effective for both NHS employees and customers. Discusses the challenges associated with opening up the NHS to customer feedback. Highlights potential weaknesses in the current approach and argues that the real challenge is for NHS managers to facilitate a culture change that moves the NHS away from a long-established defensive complaint handling practice.

Managing business compliance using model-driven security management

Science.gov (United States)

Lang, Ulrich; Schreiner, Rudolf

Compliance with regulatory and governance standards is rapidly becoming one of the hot topics of information security today. This is because, especially with regulatory compliance, both business and government have to expect large financial and reputational losses if compliance cannot be ensured and demonstrated. One major difficulty of implementing such regulations is caused the fact that they are captured at a high level of abstraction that is business-centric and not IT centric. This means that the abstract intent needs to be translated in a trustworthy, traceable way into compliance and security policies that the IT security infrastructure can enforce. Carrying out this mapping process manually is time consuming, maintenance-intensive, costly, and error-prone. Compliance monitoring is also critical in order to be able to demonstrate compliance at any given point in time. The problem is further complicated because of the need for business-driven IT agility, where IT policies and enforcement can change frequently, e.g. Business Process Modelling (BPM) driven Service Oriented Architecture (SOA). Model Driven Security (MDS) is an innovative technology approach that can solve these problems as an extension of identity and access management (IAM) and authorization management (also called entitlement management). In this paper we will illustrate the theory behind Model Driven Security for compliance, provide an improved and extended architecture, as well as a case study in the healthcare industry using our OpenPMF 2.0 technology.

Levels and drivers of fishers' compliance with marine protected areas

Directory of Open Access Journals (Sweden)

Adrian Arias

2015-12-01

Full Text Available Effective conservation depends largely on people's compliance with regulations. We investigate compliance through the lens of fishers' compliance with marine protected areas (MPAs. MPAs are widely used tools for marine conservation and fisheries management. Studies show that compliance alone is a strong predictor of fish biomass within MPAs. Hence, fishers' compliance is critical for MPA effectiveness. However, there are few empirical studies showing what factors influence fishers' compliance with MPAs. Without such information, conservation planners and managers have limited opportunities to provide effective interventions. By studying 12 MPAs in a developing country (Costa Rica, we demonstrate the role that different variables have on fishers' compliance with MPAs. Particularly, we found that compliance levels perceived by resource users were higher in MPAs (1 with multiple livelihoods, (2 where government efforts against illegal fishing were effective, (3 where fishing was allowed but regulated, (4 where people were more involved in decisions, and (5 that were smaller. We also provide a novel and practical measure of compliance: a compound variable formed by the number illegal fishers and their illegal fishing effort. Our study underlines the centrality of people's behavior in nature conservation and the importance of grounding decision making on the social and institutional realities of each location.

ETHICS AND COMPLIANCE IN BUSINESS

Directory of Open Access Journals (Sweden)

ANDREESCU Nicoleta Alina

2015-05-01

Full Text Available In this paper, we have studied the evolution of the business ethics concept through the prism of definitions from some renowned authors in the field and through the approach model of the business ethics and by implementing it in the company level. We have found out that in the last 40 years this concept has evolved from a theoretical aspect, as well as a practical one. Companies are motivated to implement ethics and compliance programs in business so that they can manage the changes that come from society. If, until recently, all that mattered for a company was profit, in the last decades, the situation changed. In order to develop a durable business, it is essential to have a good reputation. Owning and implementing an ethics and compliance program in business has become an imperative for companies, regardless of their activity sector. The role of the compliance department becomes more pregnant in each company: the employees need safety, the existence of communication lines provides comfort. From the partners in business’ point of view, owning such a program is a necessity, a condition, and not conforming to the principles of business ethics can lead to the isolation of the company. The ethics and compliance programs in business are instruments that protect the company by implementing certain proactive identification mechanisms that ensure the development of an ethical organizational culture.

Firm handling; the information exchange interaction by parents in paediatric care – An observational study

Directory of Open Access Journals (Sweden)

Carina Berterö

2011-01-01

Full Text Available Background: Information exchange is fundamental in the paediatric care encounter. Health care professionals need further background knowledge to encounter the parents/guardians from their perspective in their minors’ paediatric care. The parents’/guardians’ ability to manage the situation is dependent on their receiving optimal information, which is why it is important to study how information is exchanged.Aim: The aim of this study was to identify, describe and conceptualize how parents/guardians resolved their main concern ininformation exchange with health care professionals in paediatric care situations involving their minors.Methodology: Glaser’s grounded theory method was used and all data were analysed using constant comparative analysis. The observational study took place at three paediatric outpatient units at a university hospital and 24 parents/guardians participated. Data sources were field notes from 37 observations of paediatric care situations and five adherent excerpts from the minors’ medical records. Grounded theory is a method of conceptualising behaviour, which is why an observational study of parents’/guardians’ information exchange and social interaction in the context of nursing care is relevant as research design.Results: Firm handling was revealed as the way the parents/guardians resolved their main concerns when they were exchanging information about their minors’ paediatric care. Firm handling is built on five inter-related categories: representative advocating, collaborating, aim sharing, supportive resourcing and minor bypassing.Conclusions: This knowledge suggests possible ways for health care professionals to design paediatric care that supports, facilitates, strengthens and improves the parents’/guardians’ firm handling. The key issue is to find ways to support parents/guardians and minors so they can participate in health care encounters according to their preferences. Firm handling gives an

300 area TEDF permit compliance monitoring plan

International Nuclear Information System (INIS)

BERNESKI, L.D.

1998-01-01

This document presents the permit compliance monitoring plan for the 300 Area Treated Effluent Disposal Facility (TEDF). It addresses the compliance with the National Pollutant Discharge Elimination System (NPDES) permit and Department of Natural Resources Aquatic Lands Sewer Outfall Lease

300 area TEDF permit compliance monitoring plan

Energy Technology Data Exchange (ETDEWEB)

BERNESKI, L.D.

1998-11-20

This document presents the permit compliance monitoring plan for the 300 Area Treated Effluent Disposal Facility (TEDF). It addresses the compliance with the National Pollutant Discharge Elimination System (NPDES) permit and Department of Natural Resources Aquatic Lands Sewer Outfall Lease.

24 CFR 990.290 - Compliance with asset management requirements.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Compliance with asset management... URBAN DEVELOPMENT THE PUBLIC HOUSING OPERATING FUND PROGRAM Asset Management § 990.290 Compliance with asset management requirements. (a) A PHA is considered in compliance with asset management requirements...

A study of preslaughter pig handling and stunning in selected South African Highveld Region abattoirs

Directory of Open Access Journals (Sweden)

B.T. Spencer

2010-05-01

Full Text Available The study hypothesis was that pre-slaughter handling is not conducted in such a way that pigs can be considered humanely slaughtered, nor is it conducive to promoting those properties of fresh meat that could enhance pork quality. The 1st phase of the investigation was aimed at confirming the present compliance level within the prescribed norms. To this end the importance of stunning induction requirements for effective electrical stunning, the welfare implications relating to the pre-slaughter handling of pigs and the stunning and sticking techniques were investigated. Pre-slaughter welfare of the pigs at the abattoir was found to be influenced at the outset by the origin and type of pig slaughtered, the daily throughput range of pigs and the type of abattoir involved. A disappointing pre-arrival aspect was that deficiencies in road motor vehicles were observed while off-loading pigs. Through poor design or lack of maintenance, another factor that hampered free movement of pigs was the off-loading facilities. The nature of animal behaviour in the pens, in the passages and when going into the stunning area was directly related to the pig handling efficiency and to the nature and extent of design and maintenance problems with equipment. None of the abattoirs had a well designed in-feed to a well planned stunning area / facility, and a very high level of pig pre-slaughter stress prevailed. The optimum position of the electrodes is virtually impossible to attain under practical conditions and the practice of repeat application of electrical stunning is common. Of the total sample size (n = 1175, 34% were difficult to shackle, 90% of these being from the abattoirs tending to slaughter more routinely a wide range of different sized pigs. In this survey 149 pigs (13 % required more than a single sticking attempt to bleed out properly, considerably higher than in other published reports.

Development of Safe Food Handling Guidelines for Korean Consumers.

Science.gov (United States)

Kang, Hee-Jin; Lee, Min-Woo; Hwang, In-Kyeong; Kim, Jeong-Weon

2015-08-01

The purpose of this study was to develop guidelines for Korean consumers with regard to safe food handling practices at home by identifying current food handling issues. Korean consumers' behaviors regarding their safe food handling were identified via survey questionnaires that included items on individual hygiene practices, prepreparation steps when cooking, the cooking process, and the storage of leftover foods. The subjects were 417 Korean parents with elementary school children living in Seoul and Gyeonggi Province in the central area of Korea. The survey results revealed gaps between the knowledge or practices of Korean consumers and scientific evidence pertaining to safe food handling practices. Based on these findings, a leaflet on safe food handling guidelines was developed in accordance with Korean food culture. These guidelines suggest personal hygiene practices as well as fundamental principles and procedures for safe food handling from the stage of food purchase to that of keeping leftover dishes. A pilot application study with 50 consumers revealed that the guidelines effectively improved Korean consumers' safe food handling practices, suggesting that they can serve as practical educational material suitable for Korean consumers.

Patient compliance and effect of orthopaedic shoes

DEFF Research Database (Denmark)

Philipsen, A B; Ellitsgaard, N; Krogsgaard, M R

1999-01-01

Orthopaedic shoes are individually handmade after a prescription from an orthopaedic surgeon, hence relatively expensive. Bad compliance is mentioned in the literature but not investigated. In order to evaluate patient compliance and the effect of orthopaedic shoes, 85 patients who were prescribed...

Electronic compliance monitoring of topical treatment after ophthalmic surgery.

Science.gov (United States)

Hermann, Manuel Marcel; Ustündag, Can; Diestelhorst, Michael

2010-08-01

The success of many medical treatments is built on compliance. Electronic monitoring is the most accurate tool to quantify compliance by measuring adherence. In order to assess the efficiency of a recently introduced miniature monitoring device for eye drop application, we evaluated adherence in ophthalmic patients undergoing post-operative short-term topical treatment. This pilot study enrolled 30 outpatients (mean age 61.8 +/- 18.5 years) after cataract (n = 24) and glaucoma filtration surgery (n = 6) applying fixed-combination eye drops containing prednisolone and gentamicin five times daily for 2 weeks. Patients received eye drops in conventional bottles each equipped with a miniature monitoring device recording events of application. Two patients failed to bring back the monitoring device; therefore data collected from only 28 patients could be examined. Data showed highly variable results with a mean dose compliance of 50.2%. Dose compliance was below 25% in approximately one out of five patients. Four cataract patients, but no glaucoma patient, discontinued therapy prematurely. The observed mean dosage interval was calculated for each patient and ranged 4.6-19.7 h. Thirty percent of analysed dosage intervals exceeded 12.0 h. Different patterns of compliance behaviour-like early non-persistence, drug holiday and low treatment frequency could be identified and illustrated using electronic data. Age or gender did not significantly influence compliance rates. Our pilot study demonstrates successful electronic compliance monitoring using a technology capable of continuous data recording over weeks of treatment. The low compliance rate for a relevant part of the patients demonstrates the necessity to study and improve compliance in ophthalmology. In future, new application methods and electronic application devices may improve treatment response in eye care.

Environmental and safety aspects. The best of 'powder handling and processing' 1989 - 1997. 'Bulk solids handling' 1992 - 1997 (H/2000)

Energy Technology Data Exchange (ETDEWEB)

Woehlbier, R.H. (ed.)

2000-07-01

The book contains articles published either during 1992-1997 in ''bulk solids handling'' or during 1989-1997 in ''powder handling and processing''. Main topics are aspects of safety and environmental protection in bulk solids handling: dusts, hazardous powders, prevention and mitigation of dust explosions, powdered coal handling, dedusting, filters, electrostatic precipitation, materials recovery, occupational safety.(uke)

Selection of low-level radioactive waste disposal sites using screening models versus more complex methodologies

International Nuclear Information System (INIS)

Uslu, I.; Fields, D.E.

1993-01-01

The task of choosing a waste-disposal site from a set of candidate sites requires an approach capable of objectively handling many environmental variables for each site. Several computer methodologies have been developed to assist in the process of choosing a site for the disposal of low-level radioactive waste; however, most of these models are costly to apply, in terms of computer resources and the time and effort required by professional modelers, geologists, and waste-disposal experts. The authors describe how the relatively simple DRASTIC methodology (a standardized system for evaluating groundwater pollution potential using hydrogeologic settings) may be used for open-quotes pre-screeningclose quotes of sites to determine which subset of candidate sites is worthy of more detailed screening. Results of site comparisons made with DRASTIC are compared with results obtained using PRESTO-II methodology, which is representative of the more complex release-transport-human exposure methodologies. 6 refs., 1 fig., 1 tab

7 CFR 959.126 - Handling of culls.

Science.gov (United States)

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Handling of culls. 959.126 Section 959.126 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements...) Handled for canning or freezing. (b) As a safeguard against culls entering fresh market channels each...

Survey of postharvest handling, preservation and processing ...

African Journals Online (AJOL)

Survey of postharvest handling, preservation and processing practices along the camel milk chain in Isiolo district, Kenya. ... Despite the important contribution of camel milk to food security for pastoralists in Kenya, little is known about the postharvest handling, preservation and processing practices. In this study, existing ...

Handling uncertainty through adaptiveness in planning approaches

NARCIS (Netherlands)

Zandvoort, M.; Vlist, van der M.J.; Brink, van den A.

2018-01-01

Planners and water managers seek to be adaptive to handle uncertainty through the use of planning approaches. In this paper, we study what type of adaptiveness is proposed and how this may be operationalized in planning approaches to adequately handle different uncertainties. We took a

PREPD O and VE remote handling system

International Nuclear Information System (INIS)

Theil, T.N.

1985-01-01

The Process Experimental Pilot Plant (PREPP) at the Idaho National Engineering Laboratory is designed for volume reduction and packaging of transuranic (TRU) waste. The PREPP opening and verification enclosure (O and VE) remote handling system, within that facility, is designed to provide examination of the contents of various TRU waste storage containers. This remote handling system will provide the means of performing a hazardous operation that is currently performed manually. The TeleRobot to be used in this system is a concept that will incorporate and develop man in the loop operation (manual mode), standardized automatic sequencing of end effector tools, increased payload and reach over currently available computer-controlled robots, and remote handling of a hazardous waste operation. The system is designed within limited space constraints and an operation that was originally planned, and is currently being manually performed at other plants. The PREPP O and VE remote handling system design incorporates advancing technology to improve the working environment in the nuclear field

Harvesting and handling agricultural residues for energy

Energy Technology Data Exchange (ETDEWEB)

Jenkins, B.M.; Summer, H.R.

1986-05-01

Significant progress in understanding the needs for design of agricultural residue collection and handling systems has been made but additional research is required. Recommendations are made for research to (a) integrate residue collection and handling systems into general agricultural practices through the development of multi-use equipment and total harvest systems; (b) improve methods for routine evaluation of agricultural residue resources, possibly through remote sensing and image processing; (c) analyze biomass properties to obtain detailed data relevant to engineering design and analysis; (d) evaluate long-term environmental, social, and agronomic impacts of residue collection; (e) develop improved equipment with higher capacities to reduce residue collection and handling costs, with emphasis on optimal design of complete systems including collection, transportation, processing, storage, and utilization; and (f) produce standard forms of biomass fuels or products to enhance material handling and expand biomass markets through improved reliability and automatic control of biomass conversion and other utilization systems. 118 references.

Compliance with Iron-folic acid (IFA) therapy among pregnant ...

African Journals Online (AJOL)

Compliance increased with the increase in age, birth order and single daily dose. Forgetfulness and both perceived as well as experienced side effects of IFA therapy were the important factors for non-compliance. Conclusion: There was a moderate level of Compliance towards IFA tablets with key social and demographic ...

Using a security requirements engineering methodology in practice: The compliance with the Italian data protection legislation

NARCIS (Netherlands)

Massacci, F.; Prest, M.; Zannone, N.

2005-01-01

Extending Requirements Engineering modelling and formal analysis methodologies to cope with Security Requirements has been a major effort in the past decade. Yet, only few works describe complex case studies that show the ability of the informal and formal approaches to cope with the level

The Critical Role of Pulmonary Arterial Compliance in Pulmonary Hypertension

Science.gov (United States)

Prins, Kurt W.; Pritzker, Marc R.; Scandurra, John; Volmers, Karl; Weir, E. Kenneth

2016-01-01

The normal pulmonary circulation is a low-pressure, high-compliance system. Pulmonary arterial compliance decreases in the presence of pulmonary hypertension because of increased extracellular matrix/collagen deposition in the pulmonary arteries. Loss of pulmonary arterial compliance has been consistently shown to be a predictor of increased mortality in patients with pulmonary hypertension, even more so than pulmonary vascular resistance in some studies. Decreased pulmonary arterial compliance causes premature reflection of waves from the distal pulmonary vasculature, leading to increased pulsatile right ventricular afterload and eventually right ventricular failure. Evidence suggests that decreased pulmonary arterial compliance is a cause rather than a consequence of distal small vessel proliferative vasculopathy. Pulmonary arterial compliance decreases early in the disease process even when pulmonary artery pressure and pulmonary vascular resistance are normal, potentially enabling early diagnosis of pulmonary vascular disease, especially in high-risk populations. With the recognition of the prognostic importance of pulmonary arterial compliance, its impact on right ventricular function, and its contributory role in the development and progression of distal small-vessel proliferative vasculopathy, pulmonary arterial compliance is an attractive target for the treatment of pulmonary hypertension. PMID:26848601

30 CFR 75.817 - Cable handling and support systems.

Science.gov (United States)

2010-07-01

... High-Voltage Longwalls § 75.817 Cable handling and support systems. Longwall mining equipment must be provided with cable-handling and support systems that are constructed, installed and maintained to minimize... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Cable handling and support systems. 75.817...

Cooper-Harper Experience Report for Spacecraft Handling Qualities Applications

Science.gov (United States)

Bailey, Randall E.; Jackson, E. Bruce; Bilimoria, Karl D.; Mueller, Eric R.; Frost, Chad R.; Alderete, Thomas S.

2009-01-01

A synopsis of experience from the fixed-wing and rotary-wing aircraft communities in handling qualities development and the use of the Cooper-Harper pilot rating scale is presented as background for spacecraft handling qualities research, development, test, and evaluation (RDT&E). In addition, handling qualities experiences and lessons-learned from previous United States (US) spacecraft developments are reviewed. This report is intended to provide a central location for references, best practices, and lessons-learned to guide current and future spacecraft handling qualities RDT&E.

Cellular Manufacturing System with Dynamic Lot Size Material Handling

Science.gov (United States)

Khannan, M. S. A.; Maruf, A.; Wangsaputra, R.; Sutrisno, S.; Wibawa, T.

2016-02-01

Material Handling take as important role in Cellular Manufacturing System (CMS) design. In several study at CMS design material handling was assumed per pieces or with constant lot size. In real industrial practice, lot size may change during rolling period to cope with demand changes. This study develops CMS Model with Dynamic Lot Size Material Handling. Integer Linear Programming is used to solve the problem. Objective function of this model is minimizing total expected cost consisting machinery depreciation cost, operating costs, inter-cell material handling cost, intra-cell material handling cost, machine relocation costs, setup costs, and production planning cost. This model determines optimum cell formation and optimum lot size. Numerical examples are elaborated in the paper to ilustrate the characterictic of the model.

Switching from usual brand cigarettes to a tobacco-heating cigarette or snus: Part 1. Study design and methodology.

Science.gov (United States)

Ogden, Michael W; Marano, Kristin M; Jones, Bobbette A; Stiles, Mitchell F

2015-01-01

A randomized, multi-center study was conducted to assess potential improvement in health status measures, as well as changes in biomarkers of tobacco exposure and biomarkers of biological effect, in current adult cigarette smokers switched to tobacco-heating cigarettes, snus or ultra-low machine yield tobacco-burning cigarettes (50/group) evaluated over 24 weeks. Study design, conduct and methodology are presented here along with subjects' disposition, characteristics, compliance and safety results. This design and methodology, evaluating generally healthy adult smokers over a relatively short duration, proved feasible. Findings from this randomized study provide generalized knowledge of the risk continuum among various tobacco products (ClinicalTrials.gov Identifier: NCT02061917).

Handling of Solid Residues

International Nuclear Information System (INIS)

Medina Bermudez, Clara Ines

1999-01-01

The topic of solid residues is specifically of great interest and concern for the authorities, institutions and community that identify in them a true threat against the human health and the atmosphere in the related with the aesthetic deterioration of the urban centers and of the natural landscape; in the proliferation of vectorial transmitters of illnesses and the effect on the biodiversity. Inside the wide spectrum of topics that they keep relationship with the environmental protection, the inadequate handling of solid residues and residues dangerous squatter an important line in the definition of political and practical environmentally sustainable. The industrial development and the population's growth have originated a continuous increase in the production of solid residues; of equal it forms, their composition day after day is more heterogeneous. The base for the good handling includes the appropriate intervention of the different stages of an integral administration of residues, which include the separation in the source, the gathering, the handling, the use, treatment, final disposition and the institutional organization of the administration. The topic of the dangerous residues generates more expectation. These residues understand from those of pathogen type that are generated in the establishments of health that of hospital attention, until those of combustible, inflammable type, explosive, radio-active, volatile, corrosive, reagent or toxic, associated to numerous industrial processes, common in our countries in development

A progressive methodology for seismic safety evaluation of gravity dams

International Nuclear Information System (INIS)

Ghrib, F.; Leger, P.; Tinawi, R.; Lupien, R.; Veilleux, M.

1995-01-01

A progressive methodology for the seismic safety evaluation of existing concrete gravity dams was described. The methodology was based on five structural analysis levels with increasing complexity to represent inertia forces, dam-foundation and dam-interaction mechanisms, as well as concrete cracking. The five levels were (1) preliminary screening, (2) pseudo-static method, (3) pseudo-dynamic method, (4) linear time history analysis, and (5) non-linear history analysis. The first four levels of analysis were applied for the seismic safety evaluation of Paugan gravity dam (Quebec). Results showed that internal forces from pseudo-dynamic, response spectra and transient finite element analyses could be used to interpret the dynamic stability of dams from familiar strength-based criteria. However, as soon as the base was cracked, the seismically induced forces were modified, and level IV analyses proved more suitable to handle rationally these complexities. 8 refs., 7 figs., 1 tab

Compliance monitoring in business processes: Functionalities, application, and tool-support.

Science.gov (United States)

Ly, Linh Thao; Maggi, Fabrizio Maria; Montali, Marco; Rinderle-Ma, Stefanie; van der Aalst, Wil M P

2015-12-01

In recent years, monitoring the compliance of business processes with relevant regulations, constraints, and rules during runtime has evolved as major concern in literature and practice. Monitoring not only refers to continuously observing possible compliance violations, but also includes the ability to provide fine-grained feedback and to predict possible compliance violations in the future. The body of literature on business process compliance is large and approaches specifically addressing process monitoring are hard to identify. Moreover, proper means for the systematic comparison of these approaches are missing. Hence, it is unclear which approaches are suitable for particular scenarios. The goal of this paper is to define a framework for Compliance Monitoring Functionalities (CMF) that enables the systematic comparison of existing and new approaches for monitoring compliance rules over business processes during runtime. To define the scope of the framework, at first, related areas are identified and discussed. The CMFs are harvested based on a systematic literature review and five selected case studies. The appropriateness of the selection of CMFs is demonstrated in two ways: (a) a systematic comparison with pattern-based compliance approaches and (b) a classification of existing compliance monitoring approaches using the CMFs. Moreover, the application of the CMFs is showcased using three existing tools that are applied to two realistic data sets. Overall, the CMF framework provides powerful means to position existing and future compliance monitoring approaches.

Time for a second look at SOX compliance.

Science.gov (United States)

Bigalke, John T; Burrill, Stephen J

2007-08-01

Incentives for tax-exempt healthcare organizations to comply with the Sarbanes-Oxley Act (SOX) abound from many quarters, including government, various associations, and the capital markets. New proposals from the Securities and Exchange Commission and the Public Company Accountability Oversight Board will streamline the processes of SOX compliance, even as the cost of compliance is dropping. Voluntary SOX compliance can best be achieved by adopting a four-phased control rationalization approach to implementation and maintenance.

Repository waste-handling operations, 1998

International Nuclear Information System (INIS)

Cottam, A.E.; Connell, L.

1986-04-01

The Civilian Radioactive Waste Management Program Mission Plan and the Generic Requirements for a Mined Geologic Disposal System state that beginning in 1998, commercial spent fuel not exceeding 70,000 metric tons of heavy metal, or a quantity of solidified high-level radioactive waste resulting from the reprocessing of such a quantity of spent fuel, will be shipped to a deep geologic repository for permanent storage. The development of a waste-handling system that can process 3000 metric tons of heavy metal annually will require the adoption of a fully automated approach. The safety and minimum exposure of personnel will be the prime goals of the repository waste handling system. A man-out-of-the-loop approach will be used in all operations including the receipt of spent fuel in shipping casks, the inspection and unloading of the spent fuel into automated hot-cell facilities, the disassembly of spent fuel assemblies, the consolidation of fuel rods, and the packaging of fuel rods into heavy-walled site-specific containers. These containers are designed to contain the radionuclides for up to 1000 years. The ability of a repository to handle more than 6000 pressurized water reactor spent-fuel rods per day on a production basis for approximately a 23-year period will require that a systems approach be adopted that combines space-age technology, robotics, and sophisticated automated computerized equipment. New advanced inspection techniques, maintenance by robots, and safety will be key factors in the design, construction, and licensing of a repository waste-handling facility for 1998

Compliance or good control and accountability

International Nuclear Information System (INIS)

Erkkila, B.H.

1993-01-01

DOE Orders and draft orders for nuclear material control and accountability address the need for a complete material control and accountability (MC ampersand A) program for all DOE contractors processing, using, and/or storing nuclear materials. These orders also address performance as well as compliance issues. Very often the existence of a program or an element of a program satisfies the compliance aspect of DOE requirements. The concept of performance requirements is new and requires new thinking with all of the elements of the MC ampersand A program. The contractor is so accustomed to compliance with DOE requirements that dealing with performance is not well understood. In this paper I will address the receptiveness of performance requirements by the contractor. Auditing for performance is also a new concept and has not been implemented. The contractor will have to learn how to measure the performance of the MC ampersand A program and be able to demonstrate a certain level of performance to the oversight organization. This paper will contain a discussion of a well organized MC ampersand A program, the compliance issues associated with the program, the performance criteria associated with the program, and how to audit such a program

Compliance with Corporate Governance Principles: Australian Evidence

Directory of Open Access Journals (Sweden)

Maryam Safari

2015-12-01

Full Text Available This study investigates the association between the level of compliance of Australian listed companies with Australian corporate governance principles, in aggregate, and the level of discretionary accruals using the modified Jones model. It is hypothesised that higher levels of compliance would be associated with lower levels of discretionary accruals. Data from a random sample of 214 Australian listed companies for the years 2009 and 2010 were used to test the hypothesis. The results demonstrate a significant negative relationship indicating that companies with higher levels of compliance engage in lower levels of earnings management via discretionary accruals.

20 CFR 658.421 - Handling of JS-related complaints.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Handling of JS-related complaints. 658.421... ADMINISTRATIVE PROVISIONS GOVERNING THE JOB SERVICE SYSTEM Job Service Complaint System Federal Js Complaint System § 658.421 Handling of JS-related complaints. (a) No JS-related complaint shall be handled at the...

Fuel handling grapple for nuclear reactor plants

International Nuclear Information System (INIS)

Rousar, D.L.

1992-01-01

This patent describes a fuel handling system for nuclear reactor plants. It comprises: a reactor vessel having an openable top and removable cover and containing therein, submerged in water substantially filling the reactor vessel, a fuel core including a multiplicity of fuel bundles formed of groups of sealed tube elements enclosing fissionable fuel assembled into units, the fuel handling system consisting essentially of the combination of: a fuel bundle handling platform movable over the open top of the reactor vessel; a fuel bundle handling mast extendable downward from the platform with a lower end projecting into the open top reactor vessel to the fuel core submerged in water; a grapple head mounted on the lower end of the mast provided with grapple means comprising complementary hooks which pivot inward toward each other to securely grasp a bail handle of a nuclear reactor fuel bundle and pivot backward away from each other to release a bail handle; the grapple means having a hollow cylindrical support shaft fixed within the grapple head with hollow cylindrical sleeves rotatably mounted and fixed in longitudinal axial position on the support shaft and each sleeve having complementary hooks secured thereto whereby each hook pivots with the rotation of the sleeve secured thereto; and the hollow cylindrical support shaft being provided with complementary orifices on opposite sides of its hollow cylindrical and intermediate to the sleeves mounted thereon whereby the orifices on both sides of the hollow cylindrical support shaft are vertically aligned providing a direct in-line optical viewing path downward there-through and a remote operator positioned above the grapple means can observe from overhead the area immediately below the grapple hooks

Influence of Self-Efficacy on Compliance to Workplace Exercise

DEFF Research Database (Denmark)

Pedersen, Mette Merete; Zebis, Mette Kreutzfeldt; Langberg, Henning

2013-01-01

BACKGROUND: Continuous neck and shoulder pain is a common musculoskeletal complaint. Physical exercise can reduce pain symptoms, but compliance to exercise is a challenge. Exercise-specific self-efficacy has been found to be a predictor of participation in preplanned exercise. Little is known about...... the influence of exercise-specific self-efficacy on compliance to workplace physical exercise. PURPOSE: To determine the influence of exercise-specific self-efficacy on compliance to specific strength exercises during working hours for laboratory technicians. METHODS: We performed a cluster......). The participants answered baseline and follow-up questions regarding self-efficacy and registered all exercises in a diary. RESULTS: Overall compliance to exercises was 45 %. Compliance in company A (private sector) differed significantly between the three self-efficacy groups after 20 weeks. The odds ratio...

17 CFR 248.128 - Effective date, compliance date, and prospective application.

Science.gov (United States)

2010-04-01

... Affiliate Marketing § 248.128 Effective date, compliance date, and prospective application. (a) Effective date. This subpart is effective September 10, 2009. (b) Mandatory compliance date. Compliance with this... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Effective date, compliance...

STATE INSPECTION METHODOLOGY OF ENVIRONMENTAL REGULATORY ACTIVITY FOCUSED ON THE LIFE CYCLE PROCESSESES

Directory of Open Access Journals (Sweden)

Yuniey Quiala Armenteros

2016-10-01

Full Text Available The Cuban Environmental Regulatory Activity has on the Environmental State Inspection an instrument for control and monitoring of compliance of current legal standards regarding environmental protection and rational use of natural resources. In this research, a design methodology for effective implementation of environmental regulatory activity in Cuba directed to processes is proposed; based on the life cycle assessment and the applicable environmental management standards, including new performance indicators, which form a new tool based on scientific criterions for the Center of Environmental Inspection and Control.

Compliance to antihypertensive therapy

International Nuclear Information System (INIS)

Almas, A.; Hameed, A.; Ahmed, B.; Islam, M.

2006-01-01

Objective: To determine compliance, factors affecting compliance to antihypertensive therapy and to compare compliant and non-compliant groups, in a tertiary care setting. Study Design: Analytical (cross-sectional) study. Place and Duration of Study: The outpatient clinics at the Aga Khan University from May 2004 to February 2005. Patients and Methods: Two hundred patients presenting to the outpatients clinic were included. All patients 18 years and above, who had stage 1 and 2 hypertension, had one clinic visit to a medicine clinic, 6 months prior to presentation and started on antihypertensive medicines, were included. Results: Sixty-six percent were males and 33.5 % were females. Mean age was 58.1 ( +- 12) years and mean duration of hypertension was 7.2 (+- 6.7) years. Fifty-seven percent were compliant and 43% were noncompliant. In the noncompliant group, 53.4 % had mild noncompliance, 24.4 % had severe non-compliance, while 22% had moderate noncompliance. Factors of noncompliance were 56.8% missed doses due to forgetfulness, 12.7% deliberately missed their doses, 11.6% could not take the medicine due to side effects, 10.4% did not take the dose due to increased number of tablets, 4.6% were not properly counseled by the physician and 3.48% did not take medicines due to cost issues. The mean systolic blood pressure was 126 +- 19.2 mmHg in the compliant group while it was 133 +- 16.5 mmHg in the noncompliant group (p-value 0.004). The mean diastolic blood pressure in the compliant group was 76 +- 11.9 mmHg, while in the noncompliant group it was 81.9 +- 10.9 mmHg (p-value 0.001). Conclusion: Compliance to antihypertensive therapy in a tertiary care center is significantly good. Forgetfulness was the major reason for noncompliance. The mean blood pressure control was better in the compliant group. (author)

Money handling influences BMI: a survey of cashiers

OpenAIRE

Shraddha Karve; Ketaki Shurpali; Neelesh Dahanukar; Maithili Jog; Milind Watve

2008-01-01

Money is a recent phenomenon in the evolutionary history of man and therefore no separate brain centre to handle money is likely to have evolved. The brain areas activated by food reward and money reward are extensively overlapping. In an experimental set-up, hunger was demonstrated to influence money related decisions and money related thoughts to influence hunger. This suggests that the brain areas evolved for handling food related emotions are exapted to handle money and therefore there co...

Advanced handling-systems with enhanced performance flexibility

International Nuclear Information System (INIS)

1986-04-01

This report describes the results of a project related to future applications and requirements for advanced handling systems. This report consists of six chapters. Following the description of the aims the tools for setting up the requirements for the handling systems including the experience during the data acquisition process is described. Furthermore some information is given about the current state of the art of robotics and manipulators. Of paramount importance are the descriptions of applications and related concepts in the following chapters leading to specific categories of advanced handling units. The paper closes with the description of the first concepts for realization. (orig./HP) [de

How the NWC handles software as product

Energy Technology Data Exchange (ETDEWEB)

Vinson, D.

1997-11-01

This tutorial provides a hands-on view of how the Nuclear Weapons Complex project should be handling (or planning to handle) software as a product in response to Engineering Procedure 401099. The SQAS has published the document SQAS96-002, Guidelines for NWC Processes for Handling Software Product, that will be the basis for the tutorial. The primary scope of the tutorial is on software products that result from weapons and weapons-related projects, although the information presented is applicable to many software projects. Processes that involve the exchange, review, or evaluation of software product between or among NWC sites, DOE, and external customers will be described.

Conceptual design of CFETR divertor remote handling compatible structure

International Nuclear Information System (INIS)

Dai, Huaichu; Yao, Damao; Cao, Lei; Zhou, Zibo; Li, Lei

2016-01-01

Highlights: • Conceptual design for the CFETR divertor have been proposed, especially the divertor remote handling compatible structure. • The degrees of freedom of the divertor are analyzed in order to validate the design the divertor supports structure. • Besides the ITER-like scheme, a new scheme for the divertor remote handling compatible supports is proposed, that is the rack and pinion mechanism. • The installation/removel process is verified through simulation in Delmia in order to check design quality for remote handling requirements. - Abstract: Divertor is one of key components of tokamak fusion reactor. The CFETR is China Fusion Engineering Test Reactor. Its divertor will expose to tritium environment and neutron radiation. Materials of the divertor will be radioactived, and cannot be handled by personnel directly. To develop structure which compatible with robots handle for installation, maintenance and removing is required. This paper introduces a conceptual design of CFETR divertor module which compatible with remote handling end-effectors. The divertor module is confined by inner and outer support. The inner support is only confined divertor module radial, toroidal and vertical moving freedom degrees, but not confined rotating freedom degrees. The outer support is the structure that can confine rotating freedom degrees and should also be compatible with remote handling end-effectors.

Conceptual design of CFETR divertor remote handling compatible structure

Energy Technology Data Exchange (ETDEWEB)

Dai, Huaichu, E-mail: yaodm@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China); University of Science and Technology of China, Hefei (China); Yao, Damao; Cao, Lei; Zhou, Zibo; Li, Lei [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China)

2016-11-15

Highlights: • Conceptual design for the CFETR divertor have been proposed, especially the divertor remote handling compatible structure. • The degrees of freedom of the divertor are analyzed in order to validate the design the divertor supports structure. • Besides the ITER-like scheme, a new scheme for the divertor remote handling compatible supports is proposed, that is the rack and pinion mechanism. • The installation/removel process is verified through simulation in Delmia in order to check design quality for remote handling requirements. - Abstract: Divertor is one of key components of tokamak fusion reactor. The CFETR is China Fusion Engineering Test Reactor. Its divertor will expose to tritium environment and neutron radiation. Materials of the divertor will be radioactived, and cannot be handled by personnel directly. To develop structure which compatible with robots handle for installation, maintenance and removing is required. This paper introduces a conceptual design of CFETR divertor module which compatible with remote handling end-effectors. The divertor module is confined by inner and outer support. The inner support is only confined divertor module radial, toroidal and vertical moving freedom degrees, but not confined rotating freedom degrees. The outer support is the structure that can confine rotating freedom degrees and should also be compatible with remote handling end-effectors.

21 CFR 58.107 - Test and control article handling.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Test and control article handling. 58.107 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.107 Test and control article handling. Procedures shall be established for a system for the handling of the test and...

9 CFR 2.131 - Handling of animals.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling of animals. 2.131 Section 2.131 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE REGULATIONS Miscellaneous § 2.131 Handling of animals. (a) All licensees who maintain wild...

Job Burnout Reduces Hand Hygiene Compliance Among Nursing Staff.

Science.gov (United States)

Manomenidis, Georgios; Panagopoulou, Efharis; Montgomery, Anthony

2017-10-13

Health professional burnout has been associated with suboptimal care and reduced patient safety. However, the extent to which burnout influences hand hygiene compliance among health professionals has yet to be explored. The aim of the study was to examine whether job burnout reduces hand washing compliance among nursing staff. A diary study was conducted. Forty registered nurses working in a general city hospital in Thessaloniki, Greece, completed a questionnaire, while they were monitored for hand hygiene compliance following the World Health Organization protocol for hand hygiene assessment. Burnout was measured using validated items from the Maslach Burnout Inventory. Data were collected from September to October 2015. Multiple regression analysis showed that controlling for years in practice, burnout was negatively associated with hand hygiene compliance (R = 0.322, F(3,36) = 5.704, P compliance to hand hygiene among nurses. Given the crucial role of hand hygiene compliance for the prevention of in-hospital infections, this study highlights the need for interventions targeting the prevention of burnout among nursing staff.

Agent Architectures for Compliance

Science.gov (United States)

Burgemeestre, Brigitte; Hulstijn, Joris; Tan, Yao-Hua

A Normative Multi-Agent System consists of autonomous agents who must comply with social norms. Different kinds of norms make different assumptions about the cognitive architecture of the agents. For example, a principle-based norm assumes that agents can reflect upon the consequences of their actions; a rule-based formulation only assumes that agents can avoid violations. In this paper we present several cognitive agent architectures for self-monitoring and compliance. We show how different assumptions about the cognitive architecture lead to different information needs when assessing compliance. The approach is validated with a case study of horizontal monitoring, an approach to corporate tax auditing recently introduced by the Dutch Customs and Tax Authority.

ITER L 6 equatorial maintenance duct remote handling study

International Nuclear Information System (INIS)

Millard, J.

1996-09-01

The status and conclusions of a preliminary study of equatorial maintenance duct remote handling is reported. Due to issues with the original duct design a significant portion of the study had to be refocused on equatorial duct layout studies. The study gives an overview of some of the options for design of these ducts and the impact of the design on the equipment to work in the duct. To develop a remote handling concept for creating access through the ducts the following design tasks should be performed: define the operations sequences for equatorial maintenance duct opening and closing; review the remote handling requirements for equatorial maintenance duct opening and closing; design concept for door and pipe handling equipment and to propose preliminary procedures for material handling outsides the duct. 35 figs

MO-AB-201-03: The Alphabet Soup of Regulatory Compliance: Being Prepared for Inspections

Energy Technology Data Exchange (ETDEWEB)

Kroger, L. [University of California Davis (United States)

2015-06-15

The role of the Radiation Safety Officer at a medical facility can be complicated. The complexity of the position is based on the breadth of services provided at the institution and the nature of the radioactive materials license. Medical practices are constantly changing and the use of ionizing radiation continues to rise in this area. Some of the newer medical applications involving radiation have unique regulatory and safety issues that must be addressed. Oversight of the uses of radiation start at the local level (radiation safety officer, radiation safety committee) and are heavily impacted by outside agencies (i.e. Nuclear Regulatory Commission, State Radiologic Health, The Joint Commission (TJC), etc). This session will provide both an overview of regulatory oversight and essential compliance practices as well as practical ways to assess and introduce some of the new applications utilizing radioactive materials into your medical facility. Learning Objectives: Regulatory Compliance and Safety with New Radiotherapies: Spheres and Ra-223 (Lance Phillips) Understand the radioactive materials license amendment process to add new radiotherapies (i.e., SIR-Spheres, Therasphere, Xofigo). Understand the AU approval process for microspheres and Xofigo. Examine the training and handling requirements for new procedures. Understand the process involved with protocol development, SOP in order to define roles and responsibilities. The RSO and The RSC: Challenges and Opportunities (Colin Dimock) Understand how to form an effective Committee. Examine what the Committee does for the Program and the RSO. Understand the importance of Committee engagement. Discuss the balance of the complimentary roles of the RSO and the Committee. The Alphabet Soup of Regulatory Compliance: Being Prepared for Inspections (Linda Kroger) Recognize the various regulatory bodies and organizations with oversight or impact in Nuclear Medicine, Radiology and Radiation Oncology. Examine 10CFR35

MO-AB-201-03: The Alphabet Soup of Regulatory Compliance: Being Prepared for Inspections

International Nuclear Information System (INIS)

Kroger, L.

2015-01-01

The role of the Radiation Safety Officer at a medical facility can be complicated. The complexity of the position is based on the breadth of services provided at the institution and the nature of the radioactive materials license. Medical practices are constantly changing and the use of ionizing radiation continues to rise in this area. Some of the newer medical applications involving radiation have unique regulatory and safety issues that must be addressed. Oversight of the uses of radiation start at the local level (radiation safety officer, radiation safety committee) and are heavily impacted by outside agencies (i.e. Nuclear Regulatory Commission, State Radiologic Health, The Joint Commission (TJC), etc). This session will provide both an overview of regulatory oversight and essential compliance practices as well as practical ways to assess and introduce some of the new applications utilizing radioactive materials into your medical facility. Learning Objectives: Regulatory Compliance and Safety with New Radiotherapies: Spheres and Ra-223 (Lance Phillips) Understand the radioactive materials license amendment process to add new radiotherapies (i.e., SIR-Spheres, Therasphere, Xofigo). Understand the AU approval process for microspheres and Xofigo. Examine the training and handling requirements for new procedures. Understand the process involved with protocol development, SOP in order to define roles and responsibilities. The RSO and The RSC: Challenges and Opportunities (Colin Dimock) Understand how to form an effective Committee. Examine what the Committee does for the Program and the RSO. Understand the importance of Committee engagement. Discuss the balance of the complimentary roles of the RSO and the Committee. The Alphabet Soup of Regulatory Compliance: Being Prepared for Inspections (Linda Kroger) Recognize the various regulatory bodies and organizations with oversight or impact in Nuclear Medicine, Radiology and Radiation Oncology. Examine 10CFR35

Compliance program for 40 CFR 61, Subpart H at Los Alamos National Laboratory

International Nuclear Information System (INIS)

McNamara, E.A.

1997-01-01

Effective on March 15, 1990, the Environmental Protection Agency established regulations controlling the emission of radionuclides to the air from Department of Energy facilities to limit the dose to the public to 10 mrem/yr. These regulations are detailed in 40 CFR 61, Subpart H, open-quotes National Emission Standards for Emissions of Radionuclides Other Than Radon from Department of Energy Facilitiesclose quotes. Part of these regulations require the operation of sampling systems on stacks meeting certain requirements. Although Los Alamos National Laboratory has a long history of stack sampling, the systems in place at the time the regulation became effective did not meet the specific design requirements of the new regulation. In addition, certain specific program elements did not exist or were not adequately documented. The Los Alamos National Laboratory has undertaken a major effort to upgrade its compliance program to meet the requirements of USEPA. This effort involved: developing new and technically superior sampling methods and obtaining approval from the Environmental Protection Agency for their use; negotiating specific methodologies with the Environmental Protection Agency to implement certain requirements of the regulation: implementing a complete, quality assured, compliance program; and upgrading sampling systems. After several years of effort, Los Alamos National Laboratory now meets all requirements of the USEPA

Influence of self-efficacy on compliance to workplace exercise.

Science.gov (United States)

Pedersen, Mette Merete; Zebis, Mette Kreutzfeldt; Langberg, Henning; Poulsen, Otto Melchior; Mortensen, Ole Steen; Jensen, Jette Nygaard; Sjøgaard, Gisela; Bredahl, Thomas; Andersen, Lars Louis

2013-09-01

Continuous neck and shoulder pain is a common musculoskeletal complaint. Physical exercise can reduce pain symptoms, but compliance to exercise is a challenge. Exercise-specific self-efficacy has been found to be a predictor of participation in preplanned exercise. Little is known about the influence of exercise-specific self-efficacy on compliance to workplace physical exercise. To determine the influence of exercise-specific self-efficacy on compliance to specific strength exercises during working hours for laboratory technicians. We performed a cluster-randomized controlled trial, including laboratory technicians from two industrial production units in Copenhagen, Denmark. The participants were randomized to supervised specific strength exercises for the neck and shoulder muscles for 20 minutes three times a week (n = 282) or to a reference group (n = 255). The participants answered baseline and follow-up questions regarding self-efficacy and registered all exercises in a diary. Overall compliance to exercises was 45 %. Compliance in company A (private sector) differed significantly between the three self-efficacy groups after 20 weeks. The odds ratio of compliance was 2.37 for moderate versus low self-efficacy, and 2.93 for high versus low self-efficacy. No significant difference was found in company B (public sector) or in the intervention group as a whole. We did not find self-efficacy to be a general statistically significant predictor of compliance to exercises during 20 weeks, but found self-efficacy to be a predictor of compliance in a private sector setting. Workplace-specific differences might be present and should be taken into account.

Ergonomic design and evaluation of the handle for an endoscopic dissector.

Science.gov (United States)

Shimomura, Yoshihiro; Minowa, Keita; Kawahira, Hiroshi; Katsuura, Tetsuo

2016-05-01

The purpose of this study was to design an endoscopic dissector handle and objectively assess its usability. The handles were designed with increased contact area between the fingers and thumb and the eye rings, and the eye rings were modified to have a more perpendicular insertion angle to the finger midline. Four different handle models were compared, including a conventional product. Subjects performed dissection, exclusion, grasping, precision manipulation and precision handling tasks. Electromyography and subjective evaluations were measured. Compared to conventional handles, the designated handle reduced the muscle load in the extensor and flexor muscles of the forearm and increased subjective stability. The activity of the first dorsal interosseous muscle was sometimes influenced by the shape of the other parts. The ergonomically designed endoscopic dissector handle used in this study achieved high usability. Medical instrument designs based on ergonomic concepts should be assessed with objective indices. Practitioner Summary: The endoscopic dissector handles were designed with increased contact area and more suitable insertion angle between the fingers and thumb and the eye rings. Compared to conventional handles, the designated handle reduced the muscle load in the extensor and flexor muscles of the forearm and increased subjective stability.

49 CFR 655.82 - Compliance as a condition of financial assistance.

Science.gov (United States)

2010-10-01

... statements or misrepresentations under 18 U.S.C. 1001. (c) State's role. Each State shall certify compliance... 49 Transportation 7 2010-10-01 2010-10-01 false Compliance as a condition of financial assistance... IN TRANSIT OPERATIONS Certifying Compliance § 655.82 Compliance as a condition of financial...

Single-molecule mechanics of protein-labelled DNA handles

Directory of Open Access Journals (Sweden)

Vivek S. Jadhav

2016-01-01

Full Text Available DNA handles are often used as spacers and linkers in single-molecule experiments to isolate and tether RNAs, proteins, enzymes and ribozymes, amongst other biomolecules, between surface-modified beads for nanomechanical investigations. Custom DNA handles with varying lengths and chemical end-modifications are readily and reliably synthesized en masse, enabling force spectroscopic measurements with well-defined and long-lasting mechanical characteristics under physiological conditions over a large range of applied forces. Although these chemically tagged DNA handles are widely used, their further individual modification with protein receptors is less common and would allow for additional flexibility in grabbing biomolecules for mechanical measurements. In-depth information on reliable protocols for the synthesis of these DNA–protein hybrids and on their mechanical characteristics under varying physiological conditions are lacking in literature. Here, optical tweezers are used to investigate different protein-labelled DNA handles in a microfluidic environment under different physiological conditions. Digoxigenin (DIG-dsDNA-biotin handles of varying sizes (1000, 3034 and 4056 bp were conjugated with streptavidin or neutravidin proteins. The DIG-modified ends of these hybrids were bound to surface-modified polystyrene (anti-DIG beads. Using different physiological buffers, optical force measurements showed consistent mechanical characteristics with long dissociation times. These protein-modified DNA hybrids were also interconnected in situ with other tethered biotinylated DNA molecules. Electron-multiplying CCD (EMCCD imaging control experiments revealed that quantum dot–streptavidin conjugates at the end of DNA handles remain freely accessible. The experiments presented here demonstrate that handles produced with our protein–DNA labelling procedure are excellent candidates for grasping single molecules exposing tags suitable for molecular

45 CFR 650.19 - Electronic invention handling.

Science.gov (United States)

2010-10-01

... Report or a Final Invention Statement and Certification. (b) Questions on use of iEdison and requests for... 45 Public Welfare 3 2010-10-01 2010-10-01 false Electronic invention handling. 650.19 Section 650... PATENTS § 650.19 Electronic invention handling. (a) Grantees must use the iEdison Invention Information...

Perception on justice, trust and tax compliance behavior in Malaysia

Directory of Open Access Journals (Sweden)

Sellywati Mohd Faizal

2017-09-01

Full Text Available The relationship between justice and trust with tax compliance behavior in Malaysia was studied. Previous studies have acknowledged the perception that justice does have an impact on tax compliance. This study distinguishes justice into procedural justice, distributive justice, and retributive justice. Therefore, this study examined the effect of these three types of justice on tax compliance. Trust also influences the act of tax compliance and it also has a relationship to the element of justice. Perceptions from individual taxpayers were gathered using questionnaires from previous studies. The findings suggest only procedural justice and trust affect tax compliance and procedural justice was positively and significantly correlated to trust. However, trust does not mediate the relationship between justice and compliance. This research will contribute to the tax literature with widened scope on justice in Malaysia.

EWTD compliance amongst Anaesthesia trainees in Ireland.

Science.gov (United States)

Brohan, J; Moore, D

2017-02-01

The implications of the EWTD include a limit of 48 h working week and 11 consecutive hours rest every 24 h. This survey was designed to assess EWTD compliance over designated 1-week and 1-month periods amongst College of Anaesthesetists of Ireland (CAI) trainees and non-training Anaesthesia NCHDs. The two key elements of EWTD compliance were assessed; the compliance to a 48 h working week, and a minimizing of shift duration to 24 h. Existence of protected training time and teaching time were also assessed. This survey was completed by 191 Anaesthesia NCHDs, including 151 responses from CAI trainees; 75 % response rate from CAI trainees. 71 % of respondents worked in excess of 48 h. 37 % of respondents reported to have worked a shift >24 h duration. The average hours worked was 66 h (range 48.5-103 h). Our figures are a contrast to the reported figures in the HSE "Performance Assurance Report". 49 % of respondents reported a change in their working patterns to facilitate EWTD compliance. There appears to be a negative impact on training however, with 68 % respondents missing departmental teaching sessions and 30 % not receiving protected training time. 33 % of respondents were not in favour of full EWTD compliance. As work patterns change, it is vital to ensure that training is not compromised. Previous reports have recommended an increase in consultant numbers, which has yet to be achieved. This may provide a solution to allow service provision, NCHD training and EWTD compliance amongst NCHDs.

Tax Compliance Models: From Economic to Behavioral Approaches

Directory of Open Access Journals (Sweden)

Larissa Margareta BĂTRÂNCEA

2012-06-01

Full Text Available The paper reviews the models of tax compliance with an emphasis on economic and behavioral perspectives. Although the standard tax evasion model of Allingham and Sandmo and other similar economic models capture some important aspects of tax compliance (i.e., taxpayers’ response to increases in tax rate, audit probability, penalty rate they do not suffice the need for an accurate prediction of taxpayers’ behavior. The reason is that they do not offer a comprehensive perspective on the sociological and psychological factors which shape compliance (i.e., attitudes, beliefs, norms, perceptions, motivations. Therefore, the researchers have considered examining taxpayers’ inner motivations, beliefs, perceptions, attitudes in order to accurately predict taxpayers’ behavior. As a response to their quest, behavioral models of tax compliance have emerged. Among the sociological and psychological factors which shape tax compliance, the ‘slippery slope’ framework singles out trust in authorities and the perception of the power of authorities. The aim of the paper is to contribute to the understanding of the reasons for which there is a need for a tax compliance model which incorporates both economic and behavioral features and why governments and tax authorities should consider these models when designing fiscal policies.

Conceptual basis of a systems prioritization methodology for the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

Helton, J.C.; Beyeler, W.; Hora, S.C.

1997-01-01

A systems prioritization methodology (SPM) is under development at Sandia National Laboratories (SNL) to provide guidance to the US Department of Energy (DOE) on experimental programs and design modifications to be supported in the development of a successful compliance certification application to the US Environmental Protection Agency (EPA) for the Waste Isolation Pilot Plant (WIPP) for the geologic disposal of transuranic (TRU) waste. The purpose of the SPM is to determine the probabilities that the implementation of different combinations of experimental programs and design modifications, referred to as activity sets, will lead to compliance with 40 CFR 191, Subparts B and C (Environmental Radiation Protection Standards for the Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Waste) and 40 CFR 268·6 (Petitions to Allow Land Disposal of a Waste Prohibited under Subpart C of Part 268, which implements the Resource Conservation and Recovery Act, i.e., RCRA). Appropriate tradeoffs between compliance probability, implementation cost and implementation time can then be made in the selection of the activity set to be supported in the development of a licensing application. Determination of compliance probabilities for individual activity sets involves probability spaces for (1) possible outcomes of the experimental programs, (2) uncertainty in analysis input given specific experimental outcomes and (3) possible future occurrences at the WIPP, and also models for (1) fluid flow in the vicinity of the repository, (2) radionuclide release from the repository due to flowing groundwater, (3) groundwater flow and radionuclide transport in geologic formations overlying the repository, (4) radionuclide release to the surface environment due to cuttings and spallings removal in the event of a drilling intrusion and (5) transport of RCRA contaminants in gas and brine. Descriptions are given for the conceptual structure of the SPM and the manner in

78 FR 4848 - Social Media: Consumer Compliance Risk Management Guidance

Science.gov (United States)

2013-01-23

...: Consumer Compliance Risk Management Guidance AGENCY: Federal Financial Institutions Examination Council... Media: Consumer Compliance Risk Management Guidance'' (guidance). Upon completion of the guidance, and... management practices adequately address the consumer compliance and legal risks, as well as related risks...

12 CFR 308.303 - Filing of safety and soundness compliance plan.

Science.gov (United States)

2010-01-01

... time within which those steps will be taken. (c) Review of safety and soundness compliance plans... PRACTICE RULES OF PRACTICE AND PROCEDURE Submission and Review of Safety and Soundness Compliance Plans and... compliance plan. (a) Schedule for filing compliance plan—(1) In general. A bank shall file a written safety...

Ecological Monitoring and Compliance Program 2008 Report

Energy Technology Data Exchange (ETDEWEB)

Hansen, Dennis J.; Anderson, David C.; Hall, Derek B.; Greger, Paul D.; Ostler, W. Kent

2009-04-30

The Ecological Monitoring and Compliance Program, funded through the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO), monitors the ecosystem of the Nevada Test Site (NTS) and ensures compliance with laws and regulations pertaining to NTS biota. This report summarizes the program’s activities conducted by National Security Technologies, LLC (NSTec), during calendar year 2008. Program activities included (a) biological surveys at proposed construction sites, (b) desert tortoise compliance, (c) ecosystem mapping and data management, (d) sensitive plant species monitoring, (e) sensitive and protected/regulated animal monitoring, (f) habitat monitoring, (g) habitat restoration monitoring, and (h) monitoring of the Nonproliferation Test and Evaluation Complex (NPTEC).

Human-like Compliance for Dexterous Robot Hands

Science.gov (United States)

Jau, Bruno M.

1995-01-01

This paper describes the Active Electromechanical Compliance (AEC) system that was developed for the Jau-JPL anthropomorphic robot. The AEC system imitates the functionality of the human muscle's secondary function, which is to control the joint's stiffness: AEC is implemented through servo controlling the joint drive train's stiffness. The control strategy, controlling compliant joints in teleoperation, is described. It enables automatic hybrid position and force control through utilizing sensory feedback from joint and compliance sensors. This compliant control strategy is adaptable for autonomous robot control as well. Active compliance enables dual arm manipulations, human-like soft grasping by the robot hand, and opens the way to many new robotics applications.

Prediction of Asphalt Creep Compliance Using Artificial Neural Networks

Directory of Open Access Journals (Sweden)

Zofka A.

2012-06-01