Secure Interoperable Open Smart Grid Demonstration Project

Energy Technology Data Exchange (ETDEWEB)

Magee, Thoman [Consolidated Edison Company Of New York, Inc., NY (United States)

2014-12-28

The Consolidated Edison, Inc., of New York (Con Edison) Secure Interoperable Open Smart Grid Demonstration Project (SGDP), sponsored by the United States (US) Department of Energy (DOE), demonstrated that the reliability, efficiency, and flexibility of the grid can be improved through a combination of enhanced monitoring and control capabilities using systems and resources that interoperate within a secure services framework. The project demonstrated the capability to shift, balance, and reduce load where and when needed in response to system contingencies or emergencies by leveraging controllable field assets. The range of field assets includes curtailable customer loads, distributed generation (DG), battery storage, electric vehicle (EV) charging stations, building management systems (BMS), home area networks (HANs), high-voltage monitoring, and advanced metering infrastructure (AMI). The SGDP enables the seamless integration and control of these field assets through a common, cyber-secure, interoperable control platform, which integrates a number of existing legacy control and data systems, as well as new smart grid (SG) systems and applications. By integrating advanced technologies for monitoring and control, the SGDP helps target and reduce peak load growth, improves the reliability and efficiency of Con Edison’s grid, and increases the ability to accommodate the growing use of distributed resources. Con Edison is dedicated to lowering costs, improving reliability and customer service, and reducing its impact on the environment for its customers. These objectives also align with the policy objectives of New York State as a whole. To help meet these objectives, Con Edison’s long-term vision for the distribution grid relies on the successful integration and control of a growing penetration of distributed resources, including demand response (DR) resources, battery storage units, and DG. For example, Con Edison is expecting significant long-term growth of DG

Interoperation of World-Wide Production e-Science Infrastructures

CERN Document Server

Riedel, M; Soddemann, T; Field, L; Navarro, JP; Casey, J; Litmaath, M; Baud, J; Koblitz, B; Catlett, C; Skow, D; Wang, S; Saeki, Y; Sato, H; Matsuoka, S; Geddes, N

Many production Grid and e-Science infrastructures have begun to offer services to end-users during the past several years with an increasing number of scientific applications that require access to a wide variety of resources and services in multiple Grids. Therefore, the Grid Interoperation Now—Community Group of the Open Grid Forum—organizes and manages interoperation efforts among those production Grid infrastructures to reach the goal of a world-wide Grid vision on a technical level in the near future. This contribution highlights fundamental approaches of the group and discusses open standards in the context of production e-Science infrastructures.

Standards to open and interoperable digital libraries

Directory of Open Access Journals (Sweden)

Luís Fernando Sayão

2007-12-01

Full Text Available Interoperability is one of the main issues in creating a networked system of digital libraries. However, the interoperability as the way to accomplish data exchange and service collaboration requires adoption of a set of open standards covering all digital repository processes. The aim of this document is to revise the most important standards, protocols and the best pratices that form the framework to an open and fully interoperable digital library.

The National Opportunity for Interoperability and its Benefits for a Reliable, Robust, and Future Grid Realized Through Buildings

Energy Technology Data Exchange (ETDEWEB)

Office of Energy Efficiency and Renewable Energy

2016-02-01

Today, increasing numbers of intermittent generation sources (e.g., wind and photovoltaic) and new mobile intermittent loads (e.g., electric vehicles) can significantly affect traditional utility business practices and operations. At the same time, a growing number of technologies and devices, from appliances to lighting systems, are being deployed at consumer premises that have more sophisticated controls and information that remain underused for anything beyond basic building equipment operations. The intersection of these two drivers is an untapped opportunity and underused resource that, if appropriately configured and realized in open standards, can provide significant energy efficiency and commensurate savings on utility bills, enhanced and lower cost reliability to utilities, and national economic benefits in the creation of new markets, sectors, and businesses being fueled by the seamless coordination of energy and information through device and technology interoperability. Or, as the Quadrennial Energy Review puts it, “A plethora of both consumer-level and grid-level devices are either in the market, under development, or at the conceptual stage. When tied together through the information technology that is increasingly being deployed on electric utilities’ distribution grids, they can be an important enabling part of the emerging grid of the future. However, what is missing is the ability for all of these devices to coordinate and communicate their operations with the grid, and among themselves, in a common language — an open standard.” In this paper, we define interoperability as the ability to exchange actionable information between two or more systems within a home or building, or across and within organizational boundaries. Interoperability relies on the shared meaning of the exchanged information, with agreed-upon expectations and consequences, for the response to the information exchange.

Standardization in smart grids. Introduction to IT-related methodologies, architectures and standards

Energy Technology Data Exchange (ETDEWEB)

Uslar, Mathias; Specht, Michael; Daenekas, Christian; Trefke, Joern; Rohjans, Sebastian; Gonzalez, Jose M.; Rosinger, Christine; Bleiker, Robert [OFFIS - Institut fuer Informatik, Oldenburg (Germany)

2013-03-01

Introduction to Standardization for Smart Grids. Presents a tutorial and best practice of Smart Grid Prototype Projects. Written by leading experts in the field. Besides the regulatory and market aspects, the technical level dealing with the knowledge from multiple disciplines and the aspects of technical system integration to achieve interoperability and integration has been a strong focus in the Smart Grid. This topic is typically covered by the means of using (technical) standards for processes, data models, functions and communication links. Standardization is a key issue for Smart Grids due to the involvement of many different sectors along the value chain from the generation to the appliances. The scope of Smart Grid is broad, therefore, the standards landscape is unfortunately very large and complex. This is why the three European Standards Organizations ETSI, CEN and CENELEC created a so called Joint Working Group (JWG). This was the first harmonized effort in Europe to bring together the needed disciplines and experts delivering the final report in May 2011. After this approach proved useful, the Commission used the Mandate M/490: Standardization Mandate to European Standardization Organizations (ESOs) to support European Smart Grid deployment. The focal point addressing the ESO's response to M/490 will be the CEN, CENELEC and ETSI Smart Grids Coordination Group (SG-CG). Based on this mandate, meaningful standardization of architectures, use cases, communication technologies, data models and security standards takes place in the four existing working groups. This book provides an overview on the various building blocks and standards identified as the most prominent ones by the JWG report as well as by the first set of standards group - IEC 61850 and CIM, IEC PAS 62559 for documenting Smart Grid use cases, security requirements from the SGIS groups and an introduction on how to apply the Smart Grid Architecture Model SGAM for utilities. In addition

Medical Device Plug-and-Play Interoperability Standards and Technology Leadership

Science.gov (United States)

2017-10-01

Award Number: W81XWH-09-1-0705 TITLE: “Medical Device Plug-and-Play Interoperability Standards and Technology Leadership” PRINCIPAL INVESTIGATOR...Sept 2016 – 20 Sept 2017 4. TITLE AND SUBTITLE “Medical Device Plug-and-Play Interoperability 5a. CONTRACT NUMBER Standards and Technology ...efficiency through interoperable medical technologies . We played a leadership role on interoperability safety standards (AAMI, AAMI/UL Joint

Adoption of a SAML-XACML Profile for Authorization Interoperability across Grid Middleware in OSG and EGEE

International Nuclear Information System (INIS)

Garzoglio, G; Chadwick, K; Dykstra, D; Hesselroth, T; Levshina, T; Sharma, N; Timm, S; Bester, J; Martin, S; Groep, D; Koeroo, O; Salle, M; Verstegen, A; Gu, J; Sim, A

2011-01-01

The Authorization Interoperability activity was initiated in 2006 to foster interoperability between middleware and authorization infrastructures deployed in the Open Science Grid (OSG) and the Enabling Grids for E-sciencE (EGEE) projects. This activity delivered a common authorization protocol and a set of libraries that implement that protocol. In addition, a set of the most common Grid gateways, or Policy Enforcement Points (Globus Toolkit v4 Gatekeeper, GridFTP, dCache, etc.) and site authorization services, or Policy Decision Points (LCAS/LCMAPS, SCAS, GUMS, etc.) have been integrated with these libraries. At this time, various software providers, including the Globus Toolkit v5, BeStMan, and the Site AuthoriZation service (SAZ), are integrating the authorization interoperability protocol with their products. In addition, as more and more software supports the same protocol, the community is converging on LCMAPS as a common module for identity attribute parsing and authorization call-out. This paper presents this effort, discusses the status of adoption of the common protocol and projects the community work on authorization in the near future.

Adoption of a SAML-XACML profile for authorization interoperability across grid middleware in OSG and EGEE

Energy Technology Data Exchange (ETDEWEB)

Garzoglio, G. [Fermilab; Bester, J. [Argonne; Chadwick, K. [Fermilab; Dykstra, D. [Fermilab; Groep, D. [NIKHEF, Amsterdam; Gu, J. [LBL, Berkeley; Hesselroth, T. [Fermilab; Koeroo, O. [NIKHEF, Amsterdam; Levshina, T. [Fermilab; Martin, S. [Argonne; Salle, M. [NIKHEF, Amsterdam; Sharma, N. [Fermilab; Sim, A. [LBL, Berkeley; Timm, S. [Fermilab; Verstegen, A. [NIKHEF, Amsterdam

2011-01-01

The Authorization Interoperability activity was initiated in 2006 to foster interoperability between middleware and authorization infrastructures deployed in the Open Science Grid (OSG) and the Enabling Grids for E-sciencE (EGEE) projects. This activity delivered a common authorization protocol and a set of libraries that implement that protocol. In addition, a set of the most common Grid gateways, or Policy Enforcement Points (Globus Toolkit v4 Gatekeeper, GridFTP, dCache, etc.) and site authorization services, or Policy Decision Points (LCAS/LCMAPS, SCAS, GUMS, etc.) have been integrated with these libraries. At this time, various software providers, including the Globus Toolkit v5, BeStMan, and the Site AuthoriZation service (SAZ), are integrating the authorization interoperability protocol with their products. In addition, as more and more software supports the same protocol, the community is converging on LCMAPS as a common module for identity attribute parsing and authorization call-out. This paper presents this effort, discusses the status of adoption of the common protocol and projects the community work on authorization in the near future.

Enabling Technologies for Smart Grid Integration and Interoperability of Electric Vehicles

DEFF Research Database (Denmark)

Martinenas, Sergejus

Conventional, centralized power plants are being replaced by intermittent, distributed renewable energy sources, thus raising the concern about the stability of the power grid in its current state. All the while, electrification of all forms of transportation is increasing the load...... for successful EV integration into the smart grid, as a smart, mobile distributed energy resource. The work is split into three key topics: enabling technologies, grid service applications and interoperability issues. The current state of e-mobility technologies is surveyed. Technologies and protocols...... EVs to not only mitigate their own effects on the grid, but also provide value to grid operators, locally as well as system wide. Finally, it is shown that active integration of EVs into the smart grid, is not only achievable, but is well on its way to becoming a reality....

NetCDF-CF-OPeNDAP: Standards for ocean data interoperability and object lessons for community data standards processes

Science.gov (United States)

Hankin, Steven C.; Blower, Jon D.; Carval, Thierry; Casey, Kenneth S.; Donlon, Craig; Lauret, Olivier; Loubrieu, Thomas; Srinivasan, Ashwanth; Trinanes, Joaquin; Godøy, Øystein; Mendelssohn, Roy; Signell, Richard P.; de La Beaujardiere, Jeff; Cornillon, Peter; Blanc, Frederique; Rew, Russ; Harlan, Jack; Hall, Julie; Harrison, D.E.; Stammer, Detlef

2010-01-01

It is generally recognized that meeting society's emerging environmental science and management needs will require the marine data community to provide simpler, more effective and more interoperable access to its data. There is broad agreement, as well, that data standards are the bedrock upon which interoperability will be built. The path that would bring the marine data community to agree upon and utilize such standards, however, is often elusive. In this paper we examine the trio of standards 1) netCDF files; 2) the Climate and Forecast (CF) metadata convention; and 3) the OPeNDAP data access protocol. These standards taken together have brought our community a high level of interoperability for "gridded" data such as model outputs, satellite products and climatological analyses, and they are gaining rapid acceptance for ocean observations. We will provide an overview of the scope of the contribution that has been made. We then step back from the information technology considerations to examine the community or "social" process by which the successes were achieved. We contrast the path by which the World Meteorological Organization (WMO) has advanced the Global Telecommunications System (GTS) - netCDF/CF/OPeNDAP exemplifying a "bottom up" standards process whereas GTS is "top down". Both of these standards are tales of success at achieving specific purposes, yet each is hampered by technical limitations. These limitations sometimes lead to controversy over whether alternative technological directions should be pursued. Finally we draw general conclusions regarding the factors that affect the success of a standards development effort - the likelihood that an IT standard will meet its design goals and will achieve community-wide acceptance. We believe that a higher level of thoughtful awareness by the scientists, program managers and technology experts of the vital role of standards and the merits of alternative standards processes can help us as a community to

Interoperable and standard e-Health solution over Bluetooth.

Science.gov (United States)

Martinez, I; Del Valle, P; Munoz, P; Trigo, J D; Escayola, J; Martínez-Espronceda, M; Muñoz, A; Serrano, L; Garcia, J

2010-01-01

The new paradigm of e-Health demands open sensors and middleware components that permit transparent integration and end-to-end interoperability of new personal health devices. The use of standards seems to be the internationally adopted way to solve these problems. This paper presents the implementation of an end-to-end standards-based e-Health solution. This includes ISO/IEEE11073 standard for the interoperability of the medical devices in the patient environment and EN13606 standard for the interoperable exchange of the Electronic Healthcare Record. The design strictly fulfills all the technical features of the most recent versions of both standards. The implemented prototype has been tested in a laboratory environment to demonstrate its feasibility for its further transfer to the healthcare system.

Patterns in Standards and Technologies for Economic Information Systems Interoperability

Directory of Open Access Journals (Sweden)

Vasile Irimia

2012-06-01

Full Text Available This paper presets results from a review of the current standards used for collaboration between economic information systems, including web services and service oriented architecture, EDI, ebXML framework, RosettaNet framework, cXML, xCBL UBL, BPMN, BPEL, WS-CDL, ASN.1, and others. Standards have a key role in promoting economic information system interoperability, and thus enable collaboration. Analyzing the current standards, technologies and applications used for economic information systems interoperability has revealed a common pattern that runs through all of them. From this pattern we construct a basic model of interoperability around which we relate and judge all standards, technologies and applications for economic information systems interoperability.

Interoperability Strategic Vision

Energy Technology Data Exchange (ETDEWEB)

Widergren, Steven E.; Knight, Mark R.; Melton, Ronald B.; Narang, David; Martin, Maurice; Nordman, Bruce; Khandekar, Aditya; Hardy, Keith S.

2018-02-28

The Interoperability Strategic Vision whitepaper aims to promote a common understanding of the meaning and characteristics of interoperability and to provide a strategy to advance the state of interoperability as applied to integration challenges facing grid modernization. This includes addressing the quality of integrating devices and systems and the discipline to improve the process of successfully integrating these components as business models and information technology improve over time. The strategic vision for interoperability described in this document applies throughout the electric energy generation, delivery, and end-use supply chain. Its scope includes interactive technologies and business processes from bulk energy levels to lower voltage level equipment and the millions of appliances that are becoming equipped with processing power and communication interfaces. A transformational aspect of a vision for interoperability in the future electric system is the coordinated operation of intelligent devices and systems at the edges of grid infrastructure. This challenge offers an example for addressing interoperability concerns throughout the electric system.

CERISE - Combining energy and spatial information standards as enabler for smart grids - TKI smart grid project : TKISG01010 - D4.1 Semantic mappings to harmonize energy, geo and government-related information models. Work package 40

NARCIS (Netherlands)

Steen, M.; Knibbe, F.; Quak, C.W.; Janssen, P.; Stap, R.; Daniele, L.

2015-01-01

Version 1.0 - Final The CERISE-SG project (Combining Energy and Geo information standards as enabler for Smart Grids) focuses on interoperability with a special interest in the information exchanges between smart grids and their surroundings. We hereby focus on the exchange of information to and

Data Distribution Service-Based Interoperability Framework for Smart Grid Testbed Infrastructure

Directory of Open Access Journals (Sweden)

Tarek A. Youssef

2016-03-01

Full Text Available This paper presents the design and implementation of a communication and control infrastructure for smart grid operation. The proposed infrastructure enhances the reliability of the measurements and control network. The advantages of utilizing the data-centric over message-centric communication approach are discussed in the context of smart grid applications. The data distribution service (DDS is used to implement a data-centric common data bus for the smart grid. This common data bus improves the communication reliability, enabling distributed control and smart load management. These enhancements are achieved by avoiding a single point of failure while enabling peer-to-peer communication and an automatic discovery feature for dynamic participating nodes. The infrastructure and ideas presented in this paper were implemented and tested on the smart grid testbed. A toolbox and application programing interface for the testbed infrastructure are developed in order to facilitate interoperability and remote access to the testbed. This interface allows control, monitoring, and performing of experiments remotely. Furthermore, it could be used to integrate multidisciplinary testbeds to study complex cyber-physical systems (CPS.

Regulatory Barriers Blocking Standardization of Interoperability

OpenAIRE

Zhong, Daidi; Kirwan, Michael J; Duan, Xiaolian

2013-01-01

Developing and implementing a set of personal health device interoperability standards is key to cultivating a healthy global industry ecosystem. The standardization organizations, including the Institute of Electrical and Electronics Engineers 11073 Personal Health Device Workgroup (IEEE 11073-PHD WG) and Continua Health Alliance, are striving for this purpose. However, factors like the medial device regulation, health policy, and market reality have placed non-technical barriers over the ad...

Test Protocols for Advanced Inverter Interoperability Functions - Appendices

Energy Technology Data Exchange (ETDEWEB)

Johnson, Jay Dean [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gonzalez, Sigifredo [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Ralph, Mark E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Ellis, Abraham [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Broderick, Robert Joseph [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2013-11-01

Distributed energy resources (DER) such as photovoltaic (PV) systems, when deployed in a large scale, are capable of influencing significantly the operation of power systems. Looking to the future, stakeholders are working on standards to make it possible to manage the potentially complex interactions between DER and the power system. In 2009, the Electric Power Research Institute (EPRI), Sandia National Laboratories (SNL) with the U.S. Department of Energy (DOE), and the Solar Electric Power Association (SEPA) initiated a large industry collaborative to identify and standardize definitions for a set of DER grid support functions. While the initial effort concentrated on grid-tied PV inverters and energy storage systems, the concepts have applicability to all DER. A partial product of this on-going effort is a reference definitions document (IEC TR 61850-90-7, Object models for power converters in distributed energy resources (DER) systems) that has become a basis for expansion of related International Electrotechnical Commission (IEC) standards, and is supported by US National Institute of Standards and Technology (NIST) Smart Grid Interoperability Panel (SGIP). Some industry-led organizations advancing communications protocols have also embraced this work. As standards continue to evolve, it is necessary to develop test protocols to independently verify that the inverters are properly executing the advanced functions. Interoperability is assured by establishing common definitions for the functions and a method to test compliance with operational requirements. This document describes test protocols developed by SNL to evaluate the electrical performance and operational capabilities of PV inverters and energy storage, as described in IEC TR 61850-90-7. While many of these functions are not now required by existing grid codes or may not be widely available commercially, the industry is rapidly moving in that direction. Interoperability issues are already apparent as

Test Protocols for Advanced Inverter Interoperability Functions – Main Document

Energy Technology Data Exchange (ETDEWEB)

Johnson, Jay Dean [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gonzalez, Sigifredo [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Ralph, Mark E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Ellis, Abraham [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Broderick, Robert Joseph [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2013-11-01

Distributed energy resources (DER) such as photovoltaic (PV) systems, when deployed in a large scale, are capable of influencing significantly the operation of power systems. Looking to the future, stakeholders are working on standards to make it possible to manage the potentially complex interactions between DER and the power system. In 2009, the Electric Power Research Institute (EPRI), Sandia National Laboratories (SNL) with the U.S. Department of Energy (DOE), and the Solar Electric Power Association (SEPA) initiated a large industry collaborative to identify and standardize definitions for a set of DER grid support functions. While the initial effort concentrated on grid-tied PV inverters and energy storage systems, the concepts have applicability to all DER. A partial product of this on-going effort is a reference definitions document (IEC TR 61850-90-7, Object models for power converters in distributed energy resources (DER) systems) that has become a basis for expansion of related International Electrotechnical Commission (IEC) standards, and is supported by US National Institute of Standards and Technology (NIST) Smart Grid Interoperability Panel (SGIP). Some industry-led organizations advancing communications protocols have also embraced this work. As standards continue to evolve, it is necessary to develop test protocols to independently verify that the inverters are properly executing the advanced functions. Interoperability is assured by establishing common definitions for the functions and a method to test compliance with operational requirements. This document describes test protocols developed by SNL to evaluate the electrical performance and operational capabilities of PV inverters and energy storage, as described in IEC TR 61850-90-7. While many of these functions are not currently required by existing grid codes or may not be widely available commercially, the industry is rapidly moving in that direction. Interoperability issues are already

Technical Data Interoperability (TDI) Pathfinder Via Emerging Standards

Science.gov (United States)

Conroy, Mike; Gill, Paul; Hill, Bradley; Ibach, Brandon; Jones, Corey; Ungar, David; Barch, Jeffrey; Ingalls, John; Jacoby, Joseph; Manning, Josh;

Biodiversity information platforms: From standards to interoperability

Directory of Open Access Journals (Sweden)

Walter Berendsohn

2011-11-01

Full Text Available One of the most serious bottlenecks in the scientific workflows of biodiversity sciences is the need to integrate data from different sources, software applications, and services for analysis, visualisation and publication. For more than a quarter of a century the TDWG Biodiversity Information Standards organisation has a central role in defining and promoting data standards and protocols supporting interoperability between disparate and locally distributed systems. Although often not sufficiently recognized, TDWG standards are the foundation of many popular Biodiversity Informatics applications and infrastructures ranging from small desktop software solutions to large scale international data networks. However, individual scientists and groups of collaborating scientist have difficulties in fully exploiting the potential of standards that are often notoriously complex, lack non-technical documentations, and use different representations and underlying technologies. In the last few years, a series of initiatives such as Scratchpads, the EDIT Platform for Cybertaxonomy, and biowikifarm have started to implement and set up virtual work platforms for biodiversity sciences which shield their users from the complexity of the underlying standards. Apart from being practical work-horses for numerous working processes related to biodiversity sciences, they can be seen as information brokers mediating information between multiple data standards and protocols. The ViBRANT project will further strengthen the flexibility and power of virtual biodiversity working platforms by building software interfaces between them, thus facilitating essential information flows needed for comprehensive data exchange, data indexing, web-publication, and versioning. This work will make an important contribution to the shaping of an international, interoperable, and user-oriented biodiversity information infrastructure.

Smart Grid Demonstration Project

Energy Technology Data Exchange (ETDEWEB)

Miller, Craig [National Rural Electric Cooperative Association, Arlington, VA (United States); Carroll, Paul [National Rural Electric Cooperative Association, Arlington, VA (United States); Bell, Abigail [National Rural Electric Cooperative Association, Arlington, VA (United States)

2015-03-11

The National Rural Electric Cooperative Association (NRECA) organized the NRECA-U.S. Department of Energy (DOE) Smart Grid Demonstration Project (DE-OE0000222) to install and study a broad range of advanced smart grid technologies in a demonstration that spanned 23 electric cooperatives in 12 states. More than 205,444 pieces of electronic equipment and more than 100,000 minor items (bracket, labels, mounting hardware, fiber optic cable, etc.) were installed to upgrade and enhance the efficiency, reliability, and resiliency of the power networks at the participating co-ops. The objective of this project was to build a path for other electric utilities, and particularly electrical cooperatives, to adopt emerging smart grid technology when it can improve utility operations, thus advancing the co-ops’ familiarity and comfort with such technology. Specifically, the project executed multiple subprojects employing a range of emerging smart grid technologies to test their cost-effectiveness and, where the technology demonstrated value, provided case studies that will enable other electric utilities—particularly electric cooperatives— to use these technologies. NRECA structured the project according to the following three areas: Demonstration of smart grid technology; Advancement of standards to enable the interoperability of components; and Improvement of grid cyber security. We termed these three areas Technology Deployment Study, Interoperability, and Cyber Security. Although the deployment of technology and studying the demonstration projects at coops accounted for the largest portion of the project budget by far, we see our accomplishments in each of the areas as critical to advancing the smart grid. All project deliverables have been published. Technology Deployment Study: The deliverable was a set of 11 single-topic technical reports in areas related to the listed technologies. Each of these reports has already been submitted to DOE, distributed to co-ops, and

The advanced microgrid. Integration and interoperability

Energy Technology Data Exchange (ETDEWEB)

Bower, Ward Isaac [Ward Bower Innovations, LLC, Albuquerque, NM (United Staes); Ton, Dan T. [U.S. Dept. of Energy, Washington, DC (United States); Guttromson, Ross [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Glover, Steven F [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Stamp, Jason Edwin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bhatnagar, Dhruv [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Reilly, Jim [Reily Associates, Pittston, PA (United States)

2014-02-01

This white paper focuses on "advanced microgrids," but sections do, out of necessity, reference today's commercially available systems and installations in order to clearly distinguish the differences and advances. Advanced microgrids have been identified as being a necessary part of the modern electrical grid through a two DOE microgrid workshops, the National Institute of Standards and Technology, Smart Grid Interoperability Panel and other related sources. With their grid-interconnectivity advantages, advanced microgrids will improve system energy efficiency and reliability and provide enabling technologies for grid-independence to end-user sites. One popular definition that has been evolved and is used in multiple references is that a microgrid is a group of interconnected loads and distributed-energy resources within clearly defined electrical boundaries that acts as a single controllable entity with respect to the grid. A microgrid can connect and disconnect from the grid to enable it to operate in both grid-connected or island-mode. Further, an advanced microgrid can then be loosely defined as a dynamic microgrid.

A Review of Interoperability Standards in E-health and Imperatives for their Adoption in Africa

Directory of Open Access Journals (Sweden)

Funmi Adebesin

2013-07-01

Full Text Available The ability of healthcare information systems to share and exchange information (interoperate is essential to facilitate the quality and effectiveness of healthcare services. Although standardization is considered key to addressing the fragmentation currently challenging the healthcare environment, e-health standardization can be difficult for many reasons, one of which is making sense of the e-health interoperability standards landscape. Specifically aimed at the African health informatics community, this paper aims to provide an overview of e-health interoperability and the significance of standardization in its achievement. We conducted a literature study of e-health standards, their development, and the degree of participation by African countries in the process. We also provide a review of a selection of prominent e-health interoperability standards that have been widely adopted especially by developed countries, look at some of the factors that affect their adoption in Africa, and provide an overview of ongoing global initiatives to address the identified barriers. Although the paper is specifically aimed at the African community, its findings would be equally applicable to many other developing countries.

Standards-based Content Resources: A Prerequisite for Content Integration and Content Interoperability

Directory of Open Access Journals (Sweden)

Christian Galinski

2010-05-01

Full Text Available Objective: to show how standards-based approaches for content standardization, content management, content related services and tools as well as the respective certification systems not only guarantee reliable content integration and content interoperability, but also are of particular benefit to people with special needs in eAccessibility/eInclusion. Method: document MoU/MG/05 N0221 ''Semantic Interoperability and the need for a coherent policy for a framework of distributed, possibly federated repositories for all kinds of content items on a world-wide scale''2, which was adopted in 2005, was a first step towards the formulation of global interoperability requirements for structured content. These requirements -based on advanced terminological principles- were taken up in EU-projects such as IN-SAFETY (INfrastructure and SAFETY and OASIS (Open architecture for Accessible Services Integration and Standardization. Results: Content integration and content interoperability are key concepts in connection with the emergence of state-of-the-art distributed and federated databases/repositories of structured content. Given the fact that linguistic content items are increasingly combined with or embedded in non-linguistic content items (and vice versa, a systemic and generic approach to data modelling and content management has become the order of the day. Fulfilling the requirements of capability for multilinguality and multimodality, based on open standards makes software and database design fit for eAccessibility/eInclusion from the outset. It also makes structured content capable for global content integration and content interoperability, because it enhances its potential for being re-used and re-purposed in totally different eApplications. Such content as well as the methods, tools and services applied can be subject to new kinds of certification schemes which also should be based on standards. Conclusions: Content must be totally reliable in some

Fundamental Data Standards for Science Data System Interoperability and Data Correlation

Science.gov (United States)

Hughes, J. Steven; Gopala Krishna, Barla; Rye, Elizabeth; Crichton, Daniel

The advent of the Web and languages such as XML have brought an explosion of online science data repositories and the promises of correlated data and interoperable systems. However there have been relatively few successes in meeting the expectations of science users in the internet age. For example a Google-like search for images of Mars will return many highly-derived and appropriately tagged images but largely ignore the majority of images in most online image repositories. Once retrieved, users are further frustrated by poor data descriptions, arcane formats, and badly organized ancillary information. A wealth of research indicates that shared information models are needed to enable system interoperability and data correlation. However, at a more fundamental level, data correlation and system interoperability are dependant on a relatively few shared data standards. A com-mon data dictionary standard, for example, allows the controlled vocabulary used in a science repository to be shared with potential collaborators. Common data registry and product iden-tification standards enable systems to efficiently find, locate, and retrieve data products and their metadata from remote repositories. Information content standards define categories of descriptive data that help make the data products scientifically useful to users who were not part of the original team that produced the data. The Planetary Data System (PDS) has a plan to move the PDS to a fully online, federated system. This plan addresses new demands on the system including increasing data volume, numbers of missions, and complexity of missions. A key component of this plan is the upgrade of the PDS Data Standards. The adoption of the core PDS data standards by the International Planetary Data Alliance (IPDA) adds the element of international cooperation to the plan. This presentation will provide an overview of the fundamental data standards being adopted by the PDS that transcend science domains and that

Interoperability of Standards for Robotics in CIME

DEFF Research Database (Denmark)

Kroszynski, Uri; Sørensen, Torben; Ludwig, Arnold

1997-01-01

Esprit Project 6457 "Interoperability of Standards for Robotics in CIME (InterRob)" belongs to the Subprogramme "Integration in Manufacturing" of Esprit, the European Specific Programme for Research and Development in Information Technology supported by the European Commision.The first main goal...... of InterRob was to close the information chain between product design, simulation, programming, and robot control by developing standardized interfaces and their software implementation for standards STEP (International Standard for the Exchange of Product model data, ISO 10303) and IRL (Industrial Robot...... Language, DIN 66312). This is a continuation of the previous Esprit projects CAD*I and NIRO, which developed substantial basics of STEP.The InterRob approach is based on standardized models for product geometry, kinematics, robotics, dynamics and control, hence on a coherent neutral information model...

Recent ARC developments: Through modularity to interoperability

International Nuclear Information System (INIS)

Smirnova, O; Cameron, D; Ellert, M; Groenager, M; Johansson, D; Kleist, J; Dobe, P; Joenemo, J; Konya, B; Fraagaat, T; Konstantinov, A; Nilsen, J K; Saada, F Ould; Qiang, W; Read, A; Kocan, M; Marton, I; Nagy, Zs; Moeller, S; Mohn, B

2010-01-01

The Advanced Resource Connector (ARC) middleware introduced by NorduGrid is one of the basic Grid solutions used by scientists worldwide. While being well-proven in daily use by a wide variety of scientific applications at large-scale infrastructures like the Nordic DataGrid Facility (NDGF) and smaller scale projects, production ARC of today is still largely based on conventional Grid technologies and custom interfaces introduced a decade ago. In order to guarantee sustainability, true cross-system portability and standards-compliance based interoperability, the ARC community undertakes a massive effort of implementing modular Web Service (WS) approach into the middleware. With support from the EU KnowARC project, new components were introduced and the existing key ARC services got extended with WS technology based standard-compliant interfaces following a service-oriented architecture. Such components include the hosting environment framework, the resource-coupled execution service, the re-engineered client library, the self-healing storage solution and the peer-to-peer information system, to name a few. Gradual introduction of these new services and client tools into the production middleware releases is carried out together with NDGF and thus ensures a smooth transition to the next generation Grid middleware. Standard interfaces and modularity of the new component design are essential for ARC contributions to the planned Universal Middleware Distribution of the European Grid Initiative.

Recent ARC developments: Through modularity to interoperability

Energy Technology Data Exchange (ETDEWEB)

Smirnova, O; Cameron, D; Ellert, M; Groenager, M; Johansson, D; Kleist, J [NDGF, Kastruplundsgade 22, DK-2770 Kastrup (Denmark); Dobe, P; Joenemo, J; Konya, B [Lund University, Experimental High Energy Physics, Institute of Physics, Box 118, SE-22100 Lund (Sweden); Fraagaat, T; Konstantinov, A; Nilsen, J K; Saada, F Ould; Qiang, W; Read, A [University of Oslo, Department of Physics, P. O. Box 1048, Blindern, N-0316 Oslo (Norway); Kocan, M [Pavol Jozef Safarik University, Faculty of Science, Jesenna 5, SK-04000 Kosice (Slovakia); Marton, I; Nagy, Zs [NIIF/HUNGARNET, Victor Hugo 18-22, H-1132 Budapest (Hungary); Moeller, S [University of Luebeck, Inst. Of Neuro- and Bioinformatics, Ratzeburger Allee 160, D-23538 Luebeck (Germany); Mohn, B, E-mail: oxana.smirnova@hep.lu.s [Uppsala University, Department of Physics and Astronomy, Div. of Nuclear and Particle Physics, Box 535, SE-75121 Uppsala (Sweden)

2010-04-01

The Advanced Resource Connector (ARC) middleware introduced by NorduGrid is one of the basic Grid solutions used by scientists worldwide. While being well-proven in daily use by a wide variety of scientific applications at large-scale infrastructures like the Nordic DataGrid Facility (NDGF) and smaller scale projects, production ARC of today is still largely based on conventional Grid technologies and custom interfaces introduced a decade ago. In order to guarantee sustainability, true cross-system portability and standards-compliance based interoperability, the ARC community undertakes a massive effort of implementing modular Web Service (WS) approach into the middleware. With support from the EU KnowARC project, new components were introduced and the existing key ARC services got extended with WS technology based standard-compliant interfaces following a service-oriented architecture. Such components include the hosting environment framework, the resource-coupled execution service, the re-engineered client library, the self-healing storage solution and the peer-to-peer information system, to name a few. Gradual introduction of these new services and client tools into the production middleware releases is carried out together with NDGF and thus ensures a smooth transition to the next generation Grid middleware. Standard interfaces and modularity of the new component design are essential for ARC contributions to the planned Universal Middleware Distribution of the European Grid Initiative.

River Basin Standards Interoperability Pilot

Science.gov (United States)

Pesquer, Lluís; Masó, Joan; Stasch, Christoph

2016-04-01

There is a lot of water information and tools in Europe to be applied in the river basin management but fragmentation and a lack of coordination between countries still exists. The European Commission and the member states have financed several research and innovation projects in support of the Water Framework Directive. Only a few of them are using the recently emerging hydrological standards, such as the OGC WaterML 2.0. WaterInnEU is a Horizon 2020 project focused on creating a marketplace to enhance the exploitation of EU funded ICT models, tools, protocols and policy briefs related to water and to establish suitable conditions for new market opportunities based on these offerings. One of WaterInnEU's main goals is to assess the level of standardization and interoperability of these outcomes as a mechanism to integrate ICT-based tools, incorporate open data platforms and generate a palette of interchangeable components that are able to use the water data emerging from the recently proposed open data sharing processes and data models stimulated by initiatives such as the INSPIRE directive. As part of the standardization and interoperability activities in the project, the authors are designing an experiment (RIBASE, the present work) to demonstrate how current ICT-based tools and water data can work in combination with geospatial web services in the Scheldt river basin. The main structure of this experiment, that is the core of the present work, is composed by the following steps: - Extraction of information from river gauges data in OGC WaterML 2.0 format using SOS services (preferably compliant to the OGC SOS 2.0 Hydrology Profile Best Practice). - Model floods using a WPS 2.0, WaterML 2.0 data and weather forecast models as input. - Evaluation of the applicability of Sensor Notification Services in water emergencies. - Open distribution of the input and output data as OGC web services WaterML, / WCS / WFS and with visualization utilities: WMS. The architecture

Regulatory barriers blocking standardization of interoperability.

Science.gov (United States)

Zhong, Daidi; Kirwan, Michael J; Duan, Xiaolian

2013-07-12

Developing and implementing a set of personal health device interoperability standards is key to cultivating a healthy global industry ecosystem. The standardization organizations, including the Institute of Electrical and Electronics Engineers 11073 Personal Health Device Workgroup (IEEE 11073-PHD WG) and Continua Health Alliance, are striving for this purpose. However, factors like the medial device regulation, health policy, and market reality have placed non-technical barriers over the adoption of technical standards throughout the industry. These barriers have significantly impaired the motivations of consumer device vendors who desire to enter the personal health market and the overall success of personal health industry ecosystem. In this paper, we present the affect that these barriers have placed on the health ecosystem. This requires immediate action from policy makers and other stakeholders. The current regulatory policy needs to be updated to reflect the reality and demand of consumer health industry. Our hope is that this paper will draw wide consensus amongst its readers, policy makers, and other stakeholders.

caCORE version 3: Implementation of a model driven, service-oriented architecture for semantic interoperability.

Science.gov (United States)

Komatsoulis, George A; Warzel, Denise B; Hartel, Francis W; Shanbhag, Krishnakant; Chilukuri, Ram; Fragoso, Gilberto; Coronado, Sherri de; Reeves, Dianne M; Hadfield, Jillaine B; Ludet, Christophe; Covitz, Peter A

2008-02-01

One of the requirements for a federated information system is interoperability, the ability of one computer system to access and use the resources of another system. This feature is particularly important in biomedical research systems, which need to coordinate a variety of disparate types of data. In order to meet this need, the National Cancer Institute Center for Bioinformatics (NCICB) has created the cancer Common Ontologic Representation Environment (caCORE), an interoperability infrastructure based on Model Driven Architecture. The caCORE infrastructure provides a mechanism to create interoperable biomedical information systems. Systems built using the caCORE paradigm address both aspects of interoperability: the ability to access data (syntactic interoperability) and understand the data once retrieved (semantic interoperability). This infrastructure consists of an integrated set of three major components: a controlled terminology service (Enterprise Vocabulary Services), a standards-based metadata repository (the cancer Data Standards Repository) and an information system with an Application Programming Interface (API) based on Domain Model Driven Architecture. This infrastructure is being leveraged to create a Semantic Service-Oriented Architecture (SSOA) for cancer research by the National Cancer Institute's cancer Biomedical Informatics Grid (caBIG).

Personalized-Detailed Clinical Model for Data Interoperability Among Clinical Standards

OpenAIRE

Khan, Wajahat Ali; Hussain, Maqbool; Afzal, Muhammad; Amin, Muhammad Bilal; Saleem, Muhammad Aamir; Lee, Sungyoung

2013-01-01

Objective: Data interoperability among health information exchange (HIE) systems is a major concern for healthcare practitioners to enable provisioning of telemedicine-related services. Heterogeneity exists in these systems not only at the data level but also among different heterogeneous healthcare standards with which these are compliant. The relationship between healthcare organization data and different heterogeneous standards is necessary to achieve the goal of data level interoperabi...

Grid Enabled Geospatial Catalogue Web Service

Science.gov (United States)

Chen, Ai-Jun; Di, Li-Ping; Wei, Ya-Xing; Liu, Yang; Bui, Yu-Qi; Hu, Chau-Min; Mehrotra, Piyush

2004-01-01

Geospatial Catalogue Web Service is a vital service for sharing and interoperating volumes of distributed heterogeneous geospatial resources, such as data, services, applications, and their replicas over the web. Based on the Grid technology and the Open Geospatial Consortium (0GC) s Catalogue Service - Web Information Model, this paper proposes a new information model for Geospatial Catalogue Web Service, named as GCWS which can securely provides Grid-based publishing, managing and querying geospatial data and services, and the transparent access to the replica data and related services under the Grid environment. This information model integrates the information model of the Grid Replica Location Service (RLS)/Monitoring & Discovery Service (MDS) with the information model of OGC Catalogue Service (CSW), and refers to the geospatial data metadata standards from IS0 19115, FGDC and NASA EOS Core System and service metadata standards from IS0 191 19 to extend itself for expressing geospatial resources. Using GCWS, any valid geospatial user, who belongs to an authorized Virtual Organization (VO), can securely publish and manage geospatial resources, especially query on-demand data in the virtual community and get back it through the data-related services which provide functions such as subsetting, reformatting, reprojection etc. This work facilitates the geospatial resources sharing and interoperating under the Grid environment, and implements geospatial resources Grid enabled and Grid technologies geospatial enabled. It 2!so makes researcher to focus on science, 2nd not cn issues with computing ability, data locztic, processir,g and management. GCWS also is a key component for workflow-based virtual geospatial data producing.

Reference architecture for interoperability testing of Electric Vehicle charging

NARCIS (Netherlands)

Lehfuss, F.; Nohrer, M.; Werkmany, E.; Lopezz, J.A.; Zabalaz, E.

2015-01-01

This paper presents a reference architecture for interoperability testing of electric vehicles as well as their support equipment with the smart grid and the e-Mobility environment. Pan-European Electric Vehicle (EV)-charging is currently problematic as there are compliance and interoperability

Smart grid standards specifications, requirements, and technologies

CERN Document Server

Sato, Takuro; Duan, Bin; Macuha, Martin; Zhou, Zhenyu; Wu, Jun; Tariq, Muhammad; Asfaw, Solomon A

2015-01-01

With numerous existing Smart Grid standards, it is clear that governments and industrial organizations world-wide have understood and acknowledged the critical role they play. This timely book is a useful guide for Smart Grid professionals in easily classifying fundamental Smart Grid standards, and to quickly find the building blocks they need to analyse and implement a Smart Grid system. The standards are organized in a systematic manner that aids identification, according to grid requirements. It also covers broader Smart Grid areas including, but not limited to, the following: A fully c

CCR+: Metadata Based Extended Personal Health Record Data Model Interoperable with the ASTM CCR Standard.

Science.gov (United States)

Park, Yu Rang; Yoon, Young Jo; Jang, Tae Hun; Seo, Hwa Jeong; Kim, Ju Han

2014-01-01

Extension of the standard model while retaining compliance with it is a challenging issue because there is currently no method for semantically or syntactically verifying an extended data model. A metadata-based extended model, named CCR+, was designed and implemented to achieve interoperability between standard and extended models. Furthermore, a multilayered validation method was devised to validate the standard and extended models. The American Society for Testing and Materials (ASTM) Community Care Record (CCR) standard was selected to evaluate the CCR+ model; two CCR and one CCR+ XML files were evaluated. In total, 188 metadata were extracted from the ASTM CCR standard; these metadata are semantically interconnected and registered in the metadata registry. An extended-data-model-specific validation file was generated from these metadata. This file can be used in a smartphone application (Health Avatar CCR+) as a part of a multilayered validation. The new CCR+ model was successfully evaluated via a patient-centric exchange scenario involving multiple hospitals, with the results supporting both syntactic and semantic interoperability between the standard CCR and extended, CCR+, model. A feasible method for delivering an extended model that complies with the standard model is presented herein. There is a great need to extend static standard models such as the ASTM CCR in various domains: the methods presented here represent an important reference for achieving interoperability between standard and extended models.

An Effective Framework for Distributed Geospatial Query Processing in Grids

Directory of Open Access Journals (Sweden)

CHEN, B.

2010-08-01

Full Text Available The emergence of Internet has greatly revolutionized the way that geospatial information is collected, managed, processed and integrated. There are several important research issues to be addressed for distributed geospatial applications. First, the performance of geospatial applications is needed to be considered in the Internet environment. In this regard, the Grid as an effective distributed computing paradigm is a good choice. The Grid uses a series of middleware to interconnect and merge various distributed resources into a super-computer with capability of high performance computation. Secondly, it is necessary to ensure the secure use of independent geospatial applications in the Internet environment. The Grid just provides the utility of secure access to distributed geospatial resources. Additionally, it makes good sense to overcome the heterogeneity between individual geospatial information systems in Internet. The Open Geospatial Consortium (OGC proposes a number of generalized geospatial standards e.g. OGC Web Services (OWS to achieve interoperable access to geospatial applications. The OWS solution is feasible and widely adopted by both the academic community and the industry community. Therefore, we propose an integrated framework by incorporating OWS standards into Grids. Upon the framework distributed geospatial queries can be performed in an interoperable, high-performance and secure Grid environment.

Semantically Interoperable XML Data.

Science.gov (United States)

Vergara-Niedermayr, Cristobal; Wang, Fusheng; Pan, Tony; Kurc, Tahsin; Saltz, Joel

2013-09-01

XML is ubiquitously used as an information exchange platform for web-based applications in healthcare, life sciences, and many other domains. Proliferating XML data are now managed through latest native XML database technologies. XML data sources conforming to common XML schemas could be shared and integrated with syntactic interoperability. Semantic interoperability can be achieved through semantic annotations of data models using common data elements linked to concepts from ontologies. In this paper, we present a framework and software system to support the development of semantic interoperable XML based data sources that can be shared through a Grid infrastructure. We also present our work on supporting semantic validated XML data through semantic annotations for XML Schema, semantic validation and semantic authoring of XML data. We demonstrate the use of the system for a biomedical database of medical image annotations and markups.

Semantically Interoperable XML Data

Science.gov (United States)

Vergara-Niedermayr, Cristobal; Wang, Fusheng; Pan, Tony; Kurc, Tahsin; Saltz, Joel

2013-01-01

XML is ubiquitously used as an information exchange platform for web-based applications in healthcare, life sciences, and many other domains. Proliferating XML data are now managed through latest native XML database technologies. XML data sources conforming to common XML schemas could be shared and integrated with syntactic interoperability. Semantic interoperability can be achieved through semantic annotations of data models using common data elements linked to concepts from ontologies. In this paper, we present a framework and software system to support the development of semantic interoperable XML based data sources that can be shared through a Grid infrastructure. We also present our work on supporting semantic validated XML data through semantic annotations for XML Schema, semantic validation and semantic authoring of XML data. We demonstrate the use of the system for a biomedical database of medical image annotations and markups. PMID:25298789

The development of clinical document standards for semantic interoperability in china.

Science.gov (United States)

Yang, Peng; Pan, Feng; Liu, Danhong; Xu, Yongyong; Wan, Yi; Tu, Haibo; Tang, Xuejun; Hu, Jianping

2011-12-01

This study is aimed at developing a set of data groups (DGs) to be employed as reusable building blocks for the construction of the eight most common clinical documents used in China's general hospitals in order to achieve their structural and semantic standardization. The Diagnostics knowledge framework, the related approaches taken from the Health Level Seven (HL7), the Integrating the Healthcare Enterprise (IHE), and the Healthcare Information Technology Standards Panel (HITSP) and 1,487 original clinical records were considered together to form the DG architecture and data sets. The internal structure, content, and semantics of each DG were then defined by mapping each DG data set to a corresponding Clinical Document Architecture data element and matching each DG data set to the metadata in the Chinese National Health Data Dictionary. By using the DGs as reusable building blocks, standardized structures and semantics regarding the clinical documents for semantic interoperability were able to be constructed. Altogether, 5 header DGs, 48 section DGs, and 17 entry DGs were developed. Several issues regarding the DGs, including their internal structure, identifiers, data set names, definitions, length and format, data types, and value sets, were further defined. Standardized structures and semantics regarding the eight clinical documents were structured by the DGs. This approach of constructing clinical document standards using DGs is a feasible standard-driven solution useful in preparing documents possessing semantic interoperability among the disparate information systems in China. These standards need to be validated and refined through further study.

Innovation in OGC: The Interoperability Program

Directory of Open Access Journals (Sweden)

George Percivall

2015-10-01

Full Text Available The OGC Interoperability Program is a source of innovation in the development of open standards. The approach to innovation is based on hands-on; collaborative engineering leading to more mature standards and implementations. The process of the Interoperability Program engages a community of sponsors and participants based on an economic model that benefits all involved. Each initiative begins with an innovative approach to identify interoperability needs followed by agile software development to advance the state of technology to the benefit of society. Over eighty initiatives have been conducted in the Interoperability Program since the breakthrough Web Mapping Testbed began the program in 1999. OGC standards that were initiated in Interoperability Program are the basis of two thirds of the certified compliant products.

Interoperable Cloud Networking for intelligent power supply; Interoperables Cloud Networking fuer intelligente Energieversorgung

Energy Technology Data Exchange (ETDEWEB)

Hardin, Dave [Invensys Operations Management, Foxboro, MA (United States)

2010-09-15

Intelligent power supply by a so-called Smart Grid will make it possible to control consumption by market-based pricing and signals for load reduction. This necessitates that both the energy rates and the energy information are distributed reliably and in real time to automation systems in domestic and other buildings and in industrial plants over a wide geographic range and across the most varied grid infrastructures. Effective communication at this level of complexity necessitates computer and grid resources that are normally only available in the computer centers of big industries. The cloud computing technology, which is described here in some detail, has all features to provide reliability, interoperability and efficiency for large-scale smart grid applications, at lower cost than traditional computer centers. (orig.)

Medical Device Plug-and-Play Interoperability Standards and Technology Leadership

Science.gov (United States)

2014-10-01

Kaiser Permanente, Johns Hopkins Medicine, the VA, FDA, NIST, TATRC, computer and information science groups at University of Pennsylvania...for sharing the findings from our TATRC work and from our NIH Quantum work relative to the gaps in existing standards and recommendations on how they...challenges facing the industry in areas such as interoperability, cybersecurity , data stewardship, and system reliability, and policies needed to accelerate

Wide-area situation awareness in electric power grid

Science.gov (United States)

Greitzer, Frank L.

2010-04-01

Two primary elements of the US energy policy are demand management and efficiency and renewable sources. Major objectives are clean energy transmission and integration, reliable energy transmission, and grid cyber security. Development of the Smart Grid seeks to achieve these goals by lowering energy costs for consumers, achieving energy independence and reducing greenhouse gas emissions. The Smart Grid is expected to enable real time wide-area situation awareness (SA) for operators. Requirements for wide-area SA have been identified among interoperability standards proposed by the Federal Energy Regulatory Commission and the National Institute of Standards and Technology to ensure smart-grid functionality. Wide-area SA and enhanced decision support and visualization tools are key elements in the transformation to the Smart Grid. This paper discusses human factors research to promote SA in the electric power grid and the Smart Grid. Topics that will be discussed include the role of human factors in meeting US energy policy goals, the impact and challenges for Smart Grid development, and cyber security challenges.

The caCORE Software Development Kit: Streamlining construction of interoperable biomedical information services

Directory of Open Access Journals (Sweden)

Warzel Denise

2006-01-01

Full Text Available Abstract Background Robust, programmatically accessible biomedical information services that syntactically and semantically interoperate with other resources are challenging to construct. Such systems require the adoption of common information models, data representations and terminology standards as well as documented application programming interfaces (APIs. The National Cancer Institute (NCI developed the cancer common ontologic representation environment (caCORE to provide the infrastructure necessary to achieve interoperability across the systems it develops or sponsors. The caCORE Software Development Kit (SDK was designed to provide developers both within and outside the NCI with the tools needed to construct such interoperable software systems. Results The caCORE SDK requires a Unified Modeling Language (UML tool to begin the development workflow with the construction of a domain information model in the form of a UML Class Diagram. Models are annotated with concepts and definitions from a description logic terminology source using the Semantic Connector component. The annotated model is registered in the Cancer Data Standards Repository (caDSR using the UML Loader component. System software is automatically generated using the Codegen component, which produces middleware that runs on an application server. The caCORE SDK was initially tested and validated using a seven-class UML model, and has been used to generate the caCORE production system, which includes models with dozens of classes. The deployed system supports access through object-oriented APIs with consistent syntax for retrieval of any type of data object across all classes in the original UML model. The caCORE SDK is currently being used by several development teams, including by participants in the cancer biomedical informatics grid (caBIG program, to create compatible data services. caBIG compatibility standards are based upon caCORE resources, and thus the caCORE SDK has

Medical Device Plug-and-Play Interoperability Standards and Technology Leadership

Science.gov (United States)

2016-10-01

death,” The Boston Globe, April 3 2010. 27. Arney D, Pajic M, Goldman JM, Lee I, Mangharam R, Sokolsky O, “Toward Patient Safety in Closed - Loop Medical ...becoming increasingly clear. We have been providing medical device interoperability domain expertise to assist the Veterans Administration in a...15. Wallroth C, Goldman J, Manigel J, Osborn D, Roellike T, Weininger S, Westenskow D, “Development of a Standard for Physiologic Closed Loop

An analysis of communications and networking technologies for the smart grid

Energy Technology Data Exchange (ETDEWEB)

Garcia Hernandez, Joaquin [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2013-03-01

The Smart Grid concept has been foreseen as the integration of the electrical generation, transmission and distribution network and the data communications network. Although, traditional communications interfaces, protocols and standards has been used in the electrical grid in an isolated manner, modern communications network is considered as the fundamental enabling technology within the future Smart Grid. Modern communications technologies, protocol architectures and standards can help to build a common communications network infrastructure for data transport between customer premises, power substations, and power distribution systems, utility control centers and utility data centers. The Smart Grid will support traditional applications such as SCADA, distribution automation (DA), energy management systems (EMS), demand site management (DSM) and automatic meter reading (AMR), etc., as well as new applications like advanced metering infrastructure (AMI), substation automation (SA), microgrids, distributed generation, grid monitoring and control, data storage and analysis, among others. To make this possible, the Smart Grid requires a two-way wide area communications network between different dispersed areas, from generation, to distribution to consumer premises. In fact, it will consist of many different types of communications networks such as wide area networks, local area network, home area networks, etc. This requires a new architectural approach to implement a common communications infrastructure that provides the reliability, scalability, security and interoperability to support multiple applications. In addition, open standards addressing interoperability, are key for the development and deployment of the Smart Grid as a true integrated network. A communications backbone is necessary to provide interoperability. To achieve the level of networking, interoperability and security that meets the technical requirements of the Smart Grid, its data communications

Explaining standard dominance : The effect of influential network positions and structural holes

NARCIS (Netherlands)

van de Kaa, G.

2017-01-01

Innovative systems and infrastructures such as smart grids, the internet of things, cities, or highways require generally accepted common compatibility standards to enable components of such systems to interoperate. In some cases, various standards aredeveloped by competing standards organizations,

Usability and Interoperability Improvements for an EASE-Grid 2.0 Passive Microwave Data Product Using CF Conventions

Science.gov (United States)

Hardman, M.; Brodzik, M. J.; Long, D. G.

2017-12-01

Beginning in 1978, the satellite passive microwave data record has been a mainstay of remote sensing of the cryosphere, providing twice-daily, near-global spatial coverage for monitoring changes in hydrologic and cryospheric parameters that include precipitation, soil moisture, surface water, vegetation, snow water equivalent, sea ice concentration and sea ice motion. Historical versions of the gridded passive microwave data sets were produced as flat binary files described in human-readable documentation. This format is error-prone and makes it difficult to reliably include all processing and provenance. Funded by NASA MEaSUREs, we have completely reprocessed the gridded data record that includes SMMR, SSM/I-SSMIS and AMSR-E. The new Calibrated Enhanced-Resolution Brightness Temperature (CETB) Earth System Data Record (ESDR) files are self-describing. Our approach to the new data set was to create netCDF4 files that use standard metadata conventions and best practices to incorporate file-level, machine- and human-readable contents, geolocation, processing and provenance metadata. We followed the flexible and adaptable Climate and Forecast (CF-1.6) Conventions with respect to their coordinate conventions and map projection parameters. Additionally, we made use of Attribute Conventions for Dataset Discovery (ACDD-1.3) that provided file-level conventions with spatio-temporal bounds that enable indexing software to search for coverage. Our CETB files also include temporal coverage and spatial resolution in the file-level metadata for human-readability. We made use of the JPL CF/ACDD Compliance Checker to guide this work. We tested our file format with real software, for example, netCDF Command-line Operators (NCO) power tools for unlimited control on spatio-temporal subsetting and concatenation of files. The GDAL tools understand the CF metadata and produce fully-compliant geotiff files from our data. ArcMap can then reproject the geotiff files on-the-fly and work

Lemnos Interoperable Security Program

Energy Technology Data Exchange (ETDEWEB)

Stewart, John [Tennessee Valley Authority, Knoxville, TN (United States); Halbgewachs, Ron [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Chavez, Adrian [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Smith, Rhett [Schweitzer Engineering Laboratories, Chattanooga, TN (United States); Teumim, David [Teumim Technical, Allentown, PA (United States)

2012-01-31

The manner in which the control systems are being designed and operated in the energy sector is undergoing some of the most significant changes in history due to the evolution of technology and the increasing number of interconnections to other system. With these changes however come two significant challenges that the energy sector must face; 1) Cyber security is more important than ever before, and 2) Cyber security is more complicated than ever before. A key requirement in helping utilities and vendors alike in meeting these challenges is interoperability. While interoperability has been present in much of the discussions relating to technology utilized within the energy sector and especially the Smart Grid, it has been absent in the context of cyber security. The Lemnos project addresses these challenges by focusing on the interoperability of devices utilized within utility control systems which support critical cyber security functions. In theory, interoperability is possible with many of the cyber security solutions available to utilities today. The reality is that the effort required to achieve cyber security interoperability is often a barrier for utilities. For example, consider IPSec, a widely-used Internet Protocol to define Virtual Private Networks, or tunnels , to communicate securely through untrusted public and private networks. The IPSec protocol suite has a significant number of configuration options and encryption parameters to choose from, which must be agreed upon and adopted by both parties establishing the tunnel. The exercise in getting software or devices from different vendors to interoperate is labor intensive and requires a significant amount of security expertise by the end user. Scale this effort to a significant number of devices operating over a large geographical area and the challenge becomes so overwhelming that it often leads utilities to pursue solutions from a single vendor. These single vendor solutions may inadvertently lock

Towards sustainability: An interoperability outline for a Regional ARC based infrastructure in the WLCG and EGEE infrastructures

International Nuclear Information System (INIS)

Field, L; Gronager, M; Johansson, D; Kleist, J

2010-01-01

Interoperability of grid infrastructures is becoming increasingly important in the emergence of large scale grid infrastructures based on national and regional initiatives. To achieve interoperability of grid infrastructures adaptions and bridging of many different systems and services needs to be tackled. A grid infrastructure offers services for authentication, authorization, accounting, monitoring, operation besides from the services for handling and data and computations. This paper presents an outline of the work done to integrate the Nordic Tier-1 and 2s, which for the compute part is based on the ARC middleware, into the WLCG grid infrastructure co-operated by the EGEE project. Especially, a throughout description of integration of the compute services is presented.

Review international standards for grid connected photovoltaic systems in Malaysia

International Nuclear Information System (INIS)

Mekhilef, S.; Rahim, N.A.

2006-01-01

Grid connected PV is being applied on variety application including large centralised stations, commercial building and individual houses. There is a need for specific standard to address distinctive new issue created by grid connected PV power system. Internationally many countries are attempting to develop standards for building integration, Dc side issues and grid connection issues. This paper surveys the current development state of the major countries standards in this area, comparing and contrasting, standards and guideline under development, also addressing the need of standards for grid connected in Malaysia

Semantic and syntactic interoperability in online processing of big Earth observation data.

Science.gov (United States)

Sudmanns, Martin; Tiede, Dirk; Lang, Stefan; Baraldi, Andrea

2018-01-01

The challenge of enabling syntactic and semantic interoperability for comprehensive and reproducible online processing of big Earth observation (EO) data is still unsolved. Supporting both types of interoperability is one of the requirements to efficiently extract valuable information from the large amount of available multi-temporal gridded data sets. The proposed system wraps world models, (semantic interoperability) into OGC Web Processing Services (syntactic interoperability) for semantic online analyses. World models describe spatio-temporal entities and their relationships in a formal way. The proposed system serves as enabler for (1) technical interoperability using a standardised interface to be used by all types of clients and (2) allowing experts from different domains to develop complex analyses together as collaborative effort. Users are connecting the world models online to the data, which are maintained in a centralised storage as 3D spatio-temporal data cubes. It allows also non-experts to extract valuable information from EO data because data management, low-level interactions or specific software issues can be ignored. We discuss the concept of the proposed system, provide a technical implementation example and describe three use cases for extracting changes from EO images and demonstrate the usability also for non-EO, gridded, multi-temporal data sets (CORINE land cover).

Linked data for transaction based enterprise interoperability

NARCIS (Netherlands)

Folmer, E.J.A.; Krukkert, D.

2015-01-01

Interoperability is of major importance in B2B environments. Starting with EDI in the ‘80s, currently interoperability relies heavily on XMLbased standards. Although having great impact, still issues remain to be solved for improving B2B interoperability. These issues include lack of dynamics, cost

Interoperability of CAD Standards and Robotics in CIME

DEFF Research Database (Denmark)

Sørensen, Torben

The research presented in this dissertation concerns the identification of problems and provision of solutions for increasing the degree of interoperability between CAD, CACSD (Computer Aided Control Systems Design) and CAR (Computer Aided Robotics) in Computer Integrated Manufacturing and Engine......The research presented in this dissertation concerns the identification of problems and provision of solutions for increasing the degree of interoperability between CAD, CACSD (Computer Aided Control Systems Design) and CAR (Computer Aided Robotics) in Computer Integrated Manufacturing......· The development of a STEP based interface for general control system data and functions, especially related to robot motion control for interoperability of CAD, CACSD, and CAR systems for the extension of the inter-system communication capabilities beyond the stage achieved up to now.This interface development...... comprehends the following work:· The definition of the concepts of 'information' and 'information model', and the selection of a proper information modeling methodology within the STEP methodologies.· The elaboration of a general function model of a generic robot motion controller in IDEF0 for interface...

Vehicle to Grid Communication Standards Development, Testing and Validation - Status Report

Energy Technology Data Exchange (ETDEWEB)

Gowri, Krishnan; Pratt, Richard M.; Tuffner, Francis K.; Kintner-Meyer, Michael CW

2011-09-01

In the US, more than 10,000 electric vehicles (EV) have been delivered to consumers during the first three quarters of 2011. A large majority of these vehicles are battery electric, often requiring 220 volt charging. Though the vehicle manufacturers and charging station manufacturers have provided consumers options for charging preferences, there are no existing communications between consumers and the utilities to manage the charging demand. There is also wide variation between manufacturers in their approach to support vehicle charging. There are in-vehicle networks, charging station networks, utility networks each using either cellular, Wi-Fi, ZigBee or other proprietary communication technology with no standards currently available for interoperability. The current situation of ad-hoc solutions is a major barrier to the wide adoption of electric vehicles. SAE, the International Standards Organization/International Electrotechnical Commission (ISO/IEC), ANSI, National Institute of Standards and Technology (NIST) and several industrial organizations are working towards the development of interoperability standards. PNNL has participated in the development and testing of these standards in an effort to accelerate the adoption and development of communication modules.

75 FR 63462 - Smart Grid Interoperability Standards; Notice of Docket Designation for Smart Grid...

Science.gov (United States)

2010-10-15

... further discussion with stakeholders and an analysis of the standards' cyber security protections, NIST.... 1. The Energy Independence and Security Act of 2007 (EISA) \\1\\ lays out the policy of the United..., including protocols and model standards for information management.\\2\\ EISA directs the National Institute...

Device interoperability and authentication for telemedical appliance based on the ISO/IEEE 11073 Personal Health Device (PHD) Standards.

Science.gov (United States)

Caranguian, Luther Paul R; Pancho-Festin, Susan; Sison, Luis G

2012-01-01

In this study, we focused on the interoperability and authentication of medical devices in the context of telemedical systems. A recent standard called the ISO/IEEE 11073 Personal Health Device (X73-PHD) Standards addresses the device interoperability problem by defining common protocols for agent (medical device) and manager (appliance) interface. The X73-PHD standard however has not addressed security and authentication of medical devices which is important in establishing integrity of a telemedical system. We have designed and implemented a security policy within the X73-PHD standards. The policy will enable device authentication using Asymmetric-Key Cryptography and the RSA algorithm as the digital signature scheme. We used two approaches for performing the digital signatures: direct software implementation and use of embedded security modules (ESM). The two approaches were evaluated and compared in terms of execution time and memory requirement. For the standard 2048-bit RSA, ESM calculates digital signatures only 12% of the total time for the direct implementation. Moreover, analysis shows that ESM offers more security advantage such as secure storage of keys compared to using direct implementation. Interoperability with other systems was verified by testing the system with LNI Healthlink, a manager software that implements the X73-PHD standard. Lastly, security analysis was done and the system's response to common attacks on authentication systems was analyzed and several measures were implemented to protect the system against them.

Buildings Interoperability Landscape

Energy Technology Data Exchange (ETDEWEB)

Hardin, Dave [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stephan, Eric G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wang, Weimin [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Corbin, Charles D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Widergren, Steven E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-12-31

Through its Building Technologies Office (BTO), the United States Department of Energy’s Office of Energy Efficiency and Renewable Energy (DOE-EERE) is sponsoring an effort to advance interoperability for the integration of intelligent buildings equipment and automation systems, understanding the importance of integration frameworks and product ecosystems to this cause. This is important to BTO’s mission to enhance energy efficiency and save energy for economic and environmental purposes. For connected buildings ecosystems of products and services from various manufacturers to flourish, the ICT aspects of the equipment need to integrate and operate simply and reliably. Within the concepts of interoperability lie the specification, development, and certification of equipment with standards-based interfaces that connect and work. Beyond this, a healthy community of stakeholders that contribute to and use interoperability work products must be developed. On May 1, 2014, the DOE convened a technical meeting to take stock of the current state of interoperability of connected equipment and systems in buildings. Several insights from that meeting helped facilitate a draft description of the landscape of interoperability for connected buildings, which focuses mainly on small and medium commercial buildings. This document revises the February 2015 landscape document to address reviewer comments, incorporate important insights from the Buildings Interoperability Vision technical meeting, and capture thoughts from that meeting about the topics to be addressed in a buildings interoperability vision. In particular, greater attention is paid to the state of information modeling in buildings and the great potential for near-term benefits in this area from progress and community alignment.

GridWise Standards Mapping Overview

Energy Technology Data Exchange (ETDEWEB)

Bosquet, Mia L.

2004-04-01

''GridWise'' is a concept of how advanced communications, information and controls technology can transform the nation's energy system--across the spectrum of large scale, central generation to common consumer appliances and equipment--into a collaborative network, rich in the exchange of decision making information and an abundance of market-based opportunities (Widergren and Bosquet 2003) accompanying the electric transmission and distribution system fully into the information and telecommunication age. This report summarizes a broad review of standards efforts which are related to GridWise--those which could ultimately contribute significantly to advancements toward the GridWise vision, or those which represent today's current technological basis upon which this vision must build.

Interoperability for electronic ID

OpenAIRE

Zygadlo, Zuzanna

2009-01-01

Electronic Business, including eBanking, eCommerce and eGovernmental services, is today based on a large variety of security solutions, comprising electronic IDs provided by a broad community of Public Key Infrastructure (PKI) vendors. Significant differences in implementations of those solutions introduce a problem of lack of interoperability in electronic business, which have not yet been resolved by standardization and interoperability initiatives based on existing PKI trust models. It i...

LEARNING TOOLS INTEROPERABILITY – A NEW STANDARD FOR INTEGRATION OF DISTANCE LEARNING PLATFORMS

Directory of Open Access Journals (Sweden)

Oleksandr A. Shcherbyna

2015-06-01

Full Text Available For information technology in education there is always an issue of re-usage of electronic educational resources, their transferring possibility from one virtual learning environment to another. Previously, standardized sets of files were used to serve this purpose, for example, SCORM-packages. In this article the new standard Learning Tools Interoperability (LTI is reviewed, which allows users from one environment to access resources from another environment. This makes it possible to integrate them into a single distributed learning environment that is created and shared. The article gives examples of the practical use of standard LTI in Moodle learning management system using External tool and LTI provider plugins.

Research and Design in Unified Coding Architecture for Smart Grids

Directory of Open Access Journals (Sweden)

Gang Han

2013-09-01

Full Text Available Standardized and sharing information platform is the foundation of the Smart Grids. In order to improve the dispatching center information integration of the power grids and achieve efficient data exchange, sharing and interoperability, a unified coding architecture is proposed. The architecture includes coding management layer, coding generation layer, information models layer and application system layer. Hierarchical design makes the whole coding architecture to adapt to different application environments, different interfaces, loosely coupled requirements, which can realize the integration model management function of the power grids. The life cycle and evaluation method of survival of unified coding architecture is proposed. It can ensure the stability and availability of the coding architecture. Finally, the development direction of coding technology of the Smart Grids in future is prospected.

Integration operators for generating RDF/OWL-based user defined mediator views in a grid environment

OpenAIRE

Tawil, Abdel-Rahman H.; Taweel, Adel; Naeem, Usman; Montebello, Matthew; Bashroush, Rabih; Al-Nemrat, Ameer

2014-01-01

Research and development activities relating to the grid have generally focused on applications where data is stored in files. However, many scientific and commercial applications are highly dependent on Information Servers (ISs) for storage and organization of their data. A data-information system that supports operations on multiple information servers in a grid environment is referred to as an interoperable grid system. Different perceptions by end-users of interoperable systems in a grid ...

Earth System Grid and EGI interoperability

Science.gov (United States)

Raciazek, J.; Petitdidier, M.; Gemuend, A.; Schwichtenberg, H.

2012-04-01

The Earth Science data centers have developed a data grid called Earth Science Grid Federation (ESGF) to give the scientific community world wide access to CMIP5 (Coupled Model Inter-comparison Project 5) climate data. The CMIP5 data will permit to evaluate the impact of climate change in various environmental and societal areas, such as regional climate, extreme events, agriculture, insurance… The ESGF grid provides services like searching, browsing and downloading of datasets. At the security level, ESGF data access is protected by an authentication mechanism. An ESGF trusted X509 Short-Lived EEC certificate with the correct roles/attributes is required to get access to the data in a non-interactive way (e.g. from a worker node). To access ESGF from EGI (i.e. by earth science applications running on EGI infrastructure), the security incompatibility between the two grids is the challenge: the EGI proxy certificate is not ESGF trusted nor it contains the correct roles/attributes. To solve this problem, we decided to use a Credential Translation Service (CTS) to translate the EGI X509 proxy certificate into the ESGF Short-Lived EEC certificate (the CTS will issue ESGF certificates based on EGI certificate authentication). From the end user perspective, the main steps to use the CTS are: the user binds his two identities (EGI and ESGF) together in the CTS using the CTS web interface (this steps has to be done only once) and then request an ESGF Short-Lived EEC certificate every time is needed, using a command-line tools. The implementation of the CTS is on-going. It is based on the open source MyProxy software stack, which is used in many grid infrastructures. On the client side, the "myproxy-logon" command-line tools is used to request the certificate translation. A new option has been added to "myproxy-logon" to select the original certificate (in our case, the EGI one). On the server side, MyProxy server operates in Certificate Authority mode, with a new module

Managing Interoperability for GEOSS - A Report from the SIF

Science.gov (United States)

Khalsa, S. J.; Actur, D.; Nativi, S.; Browdy, S.; Eglitis, P.

2009-04-01

The Global Earth Observation System of Systems (GEOSS) is a coordinating and integrating framework for Earth observing and information systems, which are contributed on a voluntary basis by Members and Participating Organizations of the intergovernmental Group on Earth Observations (GEO). GEOSS exists to support informed decision making for the benefit of society, including the implementation of international environmental treaty obligations. GEO Members and Participating organizations use the GEOSS Common Infrastructure (GCI) to register their Earth observation resources, thereby making them discoverable and consumable by both humans and client applications. Essential to meeting GEO user needs is a process for supporting interoperability of observing, processing, modeling and dissemination capabilities. The GEO Standards and Interoperability Forum (SIF) was created to develop, implement and oversee this process. The SIF supports GEO organizations contributing resources to the GEOSS by helping them understand and work with the GEOSS interoperability guidelines and encouraging them to register their "interoperability arrangements" (standards or other ad hoc arrangements for interoperability) in the GEOSS standards registry, which is part of the GCI. These registered interoperability arrangements support the actual services used to achieve interoperability of systems. By making information about these interoperability arrangements available to users of the GEOSS the SIF enhances the understanding and utility of contributed resources. We describe the procedures that the SIF has enacted to carry out its work. To operate effectively the SIF uses a workflow system and is establishing a set of regional teams and domain experts. In the near term our work has focused on population and review of the GEOSS Standards Registry, but we are also developing approaches to achieving progressive convergence on, and uptake of, an optimal set of interoperability arrangements for all of

Standardized headings as a foundation for semantic interoperability in EHR

Directory of Open Access Journals (Sweden)

Halilovic Amra

2016-01-01

Full Text Available The new Swedish Patient Act, which allows patients to choose health care in county councils other than their own, creates the need to be able to share health-related information contained in electronic health records [EHRs across county councils. This demands interoperability in terms of structured and standardized data. Headings in EHR could also be a part of structured and standardized data. The aim was to study to what extent terminology is shared and standardized across county councils in Sweden. Headings from three county councils were analyzed to see to what extent they were shared and to what extent they corresponded to concepts in SNOMED CT and the National Board of Health and Welfare’s term dictionary [NBHW’s TD. In total 41% of the headings were shared across two or three county councils. A third of the shared headings corresponded to concepts in SNOMED CT. Further, an eighth of the shared headings corresponded to concepts in NBHW’s TD. The results showed that the extent of shared and standardized terminology in terms of headings across the studied three county councils were negligible.

Ubiquitous healthcare computing with SEnsor Grid Enhancement with Data Management System (SEGEDMA).

Science.gov (United States)

Preve, Nikolaos

2011-12-01

Wireless Sensor Network (WSN) can be deployed to monitor the health of patients suffering from critical diseases. Also a wireless network consisting of biomedical sensors can be implanted into the patient's body and can monitor the patients' conditions. These sensor devices, apart from having an enormous capability of collecting data from their physical surroundings, are also resource constraint in nature with a limited processing and communication ability. Therefore we have to integrate them with the Grid technology in order to process and store the collected data by the sensor nodes. In this paper, we proposed the SEnsor Grid Enhancement Data Management system, called SEGEDMA ensuring the integration of different network technologies and the continuous data access to system users. The main contribution of this work is to achieve the interoperability of both technologies through a novel network architecture ensuring also the interoperability of Open Geospatial Consortium (OGC) and HL7 standards. According to the results, SEGEDMA can be applied successfully in a decentralized healthcare environment.

GENESIS SciFlo: Choreographing Interoperable Web Services on the Grid using a Semantically-Enabled Dataflow Execution Environment

Science.gov (United States)

Wilson, B. D.; Manipon, G.; Xing, Z.

2007-12-01

The General Earth Science Investigation Suite (GENESIS) project is a NASA-sponsored partnership between the Jet Propulsion Laboratory, academia, and NASA data centers to develop a new suite of Web Services tools to facilitate multi-sensor investigations in Earth System Science. The goal of GENESIS is to enable large-scale, multi-instrument atmospheric science using combined datasets from the AIRS, MODIS, MISR, and GPS sensors. Investigations include cross-comparison of spaceborne climate sensors, cloud spectral analysis, study of upper troposphere-stratosphere water transport, study of the aerosol indirect cloud effect, and global climate model validation. The challenges are to bring together very large datasets, reformat and understand the individual instrument retrievals, co-register or re-grid the retrieved physical parameters, perform computationally-intensive data fusion and data mining operations, and accumulate complex statistics over months to years of data. To meet these challenges, we have developed a Grid computing and dataflow framework, named SciFlo, in which we are deploying a set of versatile and reusable operators for data access, subsetting, registration, mining, fusion, compression, and advanced statistical analysis. SciFlo leverages remote Web Services, called via Simple Object Access Protocol (SOAP) or REST (one-line) URLs, and the Grid Computing standards (WS-* & Globus Alliance toolkits), and enables scientists to do multi- instrument Earth Science by assembling reusable Web Services and native executables into a distributed computing flow (tree of operators). The SciFlo client & server engines optimize the execution of such distributed data flows and allow the user to transparently find and use datasets and operators without worrying about the actual location of the Grid resources. In particular, SciFlo exploits the wealth of datasets accessible by OpenGIS Consortium (OGC) Web Mapping Servers & Web Coverage Servers (WMS/WCS), and by Open Data

Ecosystem Based Business Model of Smart Grid

OpenAIRE

Lundgaard, Morten Raahauge; Ma, Zheng; Jørgensen, Bo Nørregaard

2015-01-01

This paper tries to investigate the ecosystem based business model in a smart grid infrastructure and the potential of value capture in the highly complex macro infrastructure such as smart grid. This paper proposes an alternative perspective to study the smart grid business ecosystem to support the infrastructural challenges, such as the interoperability of business components for smart grid. So far little research has explored the business ecosystem in the smart grid concept. The study on t...

BIM Interoperability Limitations: Australian and Malaysian Rail Projects

Directory of Open Access Journals (Sweden)

Kenley Russell

2016-01-01

Full Text Available Building information modelling (BIM is defined as a process involving the generation and management of digital representation of physical and functional characteristics of a facility. The purpose of interoperability in integrated or “open” BIM is to facilitate the information exchange between different digital systems, models and tools. There has been effort towards data interoperability with development of open source standards and object-oriented models, such as industry foundation classes (IFC for vertical infrastructure. However, the lack of open data standards for the information exchange for horizontal infrastructure limits the adoption and effectiveness of integrated BIM. The paper outlines two interoperability issues for construction of rail infrastructure. The issues are presented in two case study reports, one from Australia and one from Malaysia. The each case study includes: a description of the project, the application of BIM in the project, a discussion of the promised BIM interoperability solution plus the identification of the unresolved lack of interoperability for horizontal infrastructure project management. The Moreton Bay Rail project in Australia introduces general software interoperability issues. The Light Rail Extension project in Kuala Lumpur outlines an example of the integration problems related to two different location data structures. The paper highlights how the continuing lack of data interoperability limits utilisation of integrated BIM for horizontal infrastructure rail projects.

Building Automation Networks for Smart Grids

Directory of Open Access Journals (Sweden)

Peizhong Yi

2011-01-01

Full Text Available Smart grid, as an intelligent power generation, distribution, and control system, needs various communication systems to meet its requirements. The ability to communicate seamlessly across multiple networks and domains is an open issue which is yet to be adequately addressed in smart grid architectures. In this paper, we present a framework for end-to-end interoperability in home and building area networks within smart grids. 6LoWPAN and the compact application protocol are utilized to facilitate the use of IPv6 and Zigbee application profiles such as Zigbee smart energy for network and application layer interoperability, respectively. A differential service medium access control scheme enables end-to-end connectivity between 802.15.4 and IP networks while providing quality of service guarantees for Zigbee traffic over Wi-Fi. We also address several issues including interference mitigation, load scheduling, and security and propose solutions to them.

System and methods of resource usage using an interoperable management framework

Science.gov (United States)

Heileman, Gregory L.; Jamkhedkar, Pramod A.; Lamb, Christopher C.

2017-10-31

Generic rights expression language allowing interoperability across different computing environments including resource usage of different applications. A formal framework for usage management provides scaffolding upon which interoperable usage management systems can be built. Certain features of the framework are standardized, such as the operational semantics, including areas free of standards that necessitate choice and innovation to achieve a balance of flexibility and usability for interoperability in usage management systems.

Standard Procedure for Grid Interaction Analysis

International Nuclear Information System (INIS)

Svensson, Bertil; Lindahl, Sture; Karlsson, Daniel; Joensson, Jonas; Heyman, Fredrik

2015-01-01

Grid events, simultaneously affecting all safety related auxiliary systems in a nuclear power plant, are critical and must be carefully addressed in the design, upgrading and operational processes. Up to now, the connecting grid has often been treated as either fully available or totally unavailable, and too little attention has been paid to specify the grid performance criteria. This paper deals with standard procedures for grid interaction analysis, to derive tools and criteria to handle grid events challenging the safety systems of the plant. Critical external power system events are investigated and characterised, with respect to severity and rate of occurrence. These critical events are then grouped with respect to impact on the safety systems, when a disturbance propagates into the plant. It is then important to make sure that 1) the impact of the disturbance will never reach any critical system, 2) the impact of the disturbance will be eliminated before it will hurt any critical system, or 3) the critical systems will be proven to be designed in such a way that they can withstand the impact of the disturbance, and the associated control and protection systems can withstand voltage and frequency transients associated with the disturbances. A number of representative disturbance profiles, reflecting connecting grid conditions, are therefore derived, to be used for equipment testing. (authors)

Advances in a Distributed Approach for Ocean Model Data Interoperability

Directory of Open Access Journals (Sweden)

Richard P. Signell

2014-03-01

Full Text Available An infrastructure for earth science data is emerging across the globe based on common data models and web services. As we evolve from custom file formats and web sites to standards-based web services and tools, data is becoming easier to distribute, find and retrieve, leaving more time for science. We describe recent advances that make it easier for ocean model providers to share their data, and for users to search, access, analyze and visualize ocean data using MATLAB® and Python®. These include a technique for modelers to create aggregated, Climate and Forecast (CF metadata convention datasets from collections of non-standard Network Common Data Form (NetCDF output files, the capability to remotely access data from CF-1.6-compliant NetCDF files using the Open Geospatial Consortium (OGC Sensor Observation Service (SOS, a metadata standard for unstructured grid model output (UGRID, and tools that utilize both CF and UGRID standards to allow interoperable data search, browse and access. We use examples from the U.S. Integrated Ocean Observing System (IOOS® Coastal and Ocean Modeling Testbed, a project in which modelers using both structured and unstructured grid model output needed to share their results, to compare their results with other models, and to compare models with observed data. The same techniques used here for ocean modeling output can be applied to atmospheric and climate model output, remote sensing data, digital terrain and bathymetric data.

Advances in a distributed approach for ocean model data interoperability

Science.gov (United States)

Signell, Richard P.; Snowden, Derrick P.

2014-01-01

An infrastructure for earth science data is emerging across the globe based on common data models and web services. As we evolve from custom file formats and web sites to standards-based web services and tools, data is becoming easier to distribute, find and retrieve, leaving more time for science. We describe recent advances that make it easier for ocean model providers to share their data, and for users to search, access, analyze and visualize ocean data using MATLAB® and Python®. These include a technique for modelers to create aggregated, Climate and Forecast (CF) metadata convention datasets from collections of non-standard Network Common Data Form (NetCDF) output files, the capability to remotely access data from CF-1.6-compliant NetCDF files using the Open Geospatial Consortium (OGC) Sensor Observation Service (SOS), a metadata standard for unstructured grid model output (UGRID), and tools that utilize both CF and UGRID standards to allow interoperable data search, browse and access. We use examples from the U.S. Integrated Ocean Observing System (IOOS®) Coastal and Ocean Modeling Testbed, a project in which modelers using both structured and unstructured grid model output needed to share their results, to compare their results with other models, and to compare models with observed data. The same techniques used here for ocean modeling output can be applied to atmospheric and climate model output, remote sensing data, digital terrain and bathymetric data.

Adaptation of interoperability standards for cross domain usage

Science.gov (United States)

Essendorfer, B.; Kerth, Christian; Zaschke, Christian

2017-05-01

As globalization affects most aspects of modern life, challenges of quick and flexible data sharing apply to many different domains. To protect a nation's security for example, one has to look well beyond borders and understand economical, ecological, cultural as well as historical influences. Most of the time information is produced and stored digitally and one of the biggest challenges is to receive relevant readable information applicable to a specific problem out of a large data stock at the right time. These challenges to enable data sharing across national, organizational and systems borders are known to other domains (e.g., ecology or medicine) as well. Solutions like specific standards have been worked on for the specific problems. The question is: what can the different domains learn from each other and do we have solutions when we need to interlink the information produced in these domains? A known problem is to make civil security data available to the military domain and vice versa in collaborative operations. But what happens if an environmental crisis leads to the need to quickly cooperate with civil or military security in order to save lives? How can we achieve interoperability in such complex scenarios? The paper introduces an approach to adapt standards from one domain to another and lines out problems that have to be overcome and limitations that may apply.

Distributed Energy Systems Integration and Demand Optimization for Autonomous Operations and Electric Grid Transactions

Energy Technology Data Exchange (ETDEWEB)

Ghatikar, Girish [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Greenlots, San Francisco, CA (United States); Mashayekh, Salman [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Stadler, Michael [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Center for Energy and Innovation Technologies (Austria); Yin, Rongxin [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Liu, Zhenhua [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2015-11-29

Distributed power systems in the U.S. and globally are evolving to provide reliable and clean energy to consumers. In California, existing regulations require significant increases in renewable generation, as well as identification of customer-side distributed energy resources (DER) controls, communication technologies, and standards for interconnection with the electric grid systems. As DER deployment expands, customer-side DER control and optimization will be critical for system flexibility and demand response (DR) participation, which improves the economic viability of DER systems. Current DER systems integration and communication challenges include leveraging the existing DER and DR technology and systems infrastructure, and enabling optimized cost, energy and carbon choices for customers to deploy interoperable grid transactions and renewable energy systems at scale. Our paper presents a cost-effective solution to these challenges by exploring communication technologies and information models for DER system integration and interoperability. This system uses open standards and optimization models for resource planning based on dynamic-pricing notifications and autonomous operations within various domains of the smart grid energy system. It identifies architectures and customer engagement strategies in dynamic DR pricing transactions to generate feedback information models for load flexibility, load profiles, and participation schedules. The models are tested at a real site in California—Fort Hunter Liggett (FHL). Furthermore, our results for FHL show that the model fits within the existing and new DR business models and networked systems for transactive energy concepts. Integrated energy systems, communication networks, and modeling tools that coordinate supply-side networks and DER will enable electric grid system operators to use DER for grid transactions in an integrated system.

TUX-INTERO: A Portal for secure interoperation of Grids

OpenAIRE

Shashi Bhanwar; Seema Bawa

2010-01-01

In this paper, we propose TUX-INTERO - a portlet-based Grid portal for integrating existing grid technologies under a common interface and providing reliable services to the users. We have developed a prototype of TUX-INTERO - a grid portal using portlet technology. The paper presents design and development of TUXINTERO. The requirements for the portal, its design and technology choices lead to the utilization of Globus Toolkit as middleware for connecting global resources, SUN N1 GE6 and Con...

Cloud portability and interoperability issues and current trends

CERN Document Server

Di Martino, Beniamino; Esposito, Antonio

2015-01-01

This book offers readers a quick, comprehensive and up-to-date overview of the most important methodologies, technologies, APIs and standards related to the portability and interoperability of cloud applications and services, illustrated by a number of use cases representing a variety of interoperability and portability scenarios. The lack of portability and interoperability between cloud platforms at different service levels is the main issue affecting cloud-based services today. The brokering, negotiation, management, monitoring and reconfiguration of cloud resources are challenging tasks

An open, interoperable, transdisciplinary approach to a point cloud data service using OGC standards and open source software.

Science.gov (United States)

Steer, Adam; Trenham, Claire; Druken, Kelsey; Evans, Benjamin; Wyborn, Lesley

2017-04-01

High resolution point clouds and other topology-free point data sources are widely utilised for research, management and planning activities. A key goal for research and management users is making these data and common derivatives available in a way which is seamlessly interoperable with other observed and modelled data. The Australian National Computational Infrastructure (NCI) stores point data from a range of disciplines, including terrestrial and airborne LiDAR surveys, 3D photogrammetry, airborne and ground-based geophysical observations, bathymetric observations and 4D marine tracers. These data are stored alongside a significant store of Earth systems data including climate and weather, ecology, hydrology, geoscience and satellite observations, and available from NCI's National Environmental Research Data Interoperability Platform (NERDIP) [1]. Because of the NERDIP requirement for interoperability with gridded datasets, the data models required to store these data may not conform to the LAS/LAZ format - the widely accepted community standard for point data storage and transfer. The goal for NCI is making point data discoverable, accessible and useable in ways which allow seamless integration with earth observation datasets and model outputs - in turn assisting researchers and decision-makers in the often-convoluted process of handling and analyzing massive point datasets. With a use-case of providing a web data service and supporting a derived product workflow, NCI has implemented and tested a web-based point cloud service using the Open Geospatial Consortium (OGC) Web Processing Service [2] as a transaction handler between a web-based client and server-side computing tools based on a native Linux operating system. Using this model, the underlying toolset for driving a data service is flexible and can take advantage of NCI's highly scalable research cloud. Present work focusses on the Point Data Abstraction Library (PDAL) [3] as a logical choice for

A Pragmatic Approach to Sustainable Interoperability for the Web 2.0 World

Science.gov (United States)

Wright, D. J.; Sankaran, S.

2015-12-01

In the geosciences, interoperability is a fundamental requirement. Members of various standards organizations such as the OGC and ISO-TC 211 have done yeomen services to promote a standards-centric approach to manage the interoperability challenges that organizations face today. The specific challenges that organizations face when adopting interoperability patterns are very many. One approach, that of mandating the use of specific standards has been reasonably successful. But scientific communities, as with all others, ultimately want their solutions to be widely accepted and used. And to this end there is a crying need to explore all possible interoperability patterns without restricting the choices to mandated standards. Standards are created by a slow and deliberative process that sometimes takes a long time to come to fruition and therefore sometime feel to fall short of user expectations. It seems therefore that organizations are left with a series of perceived orthogonal requirements when they want to pursue interoperability. They want a robust but agile solution, a mature approach that also needs to satisfy latest technology trends and so on. Sustainable interoperability patterns need to be forward looking and should choose the patterns and paradigms of the Web 2.0 generation. To this end, the key is to choose platform technologies that embrace multiple interoperability mechanisms that are built on fundamental "open" principles and which align with popular mainstream patterns. We seek to explore data-, metadata- and web service-related interoperability patterns through the prism of building solutions that encourage strong implementer and end-user engagement, improved usability and scalability considerations, and appealing developer frameworks that can grow the audience. The path to tread is not new, and the geocommunity only needs to observe and align its end goals with current Web 2.0 patterns to realize all the benefits that today we all take for granted

Leveraging Emerging Standards to Advance Data Interoperability in the Marine Geosciences

Science.gov (United States)

Arko, R. A.; Fishman, A. V.

2005-12-01

Data interoperability in the marine geosciences has long been hampered by the heterogeneity of our data sets (i.e. the large number and variety of expeditions, platforms, instruments, data types, etc); the corresponding lack of metadata standardization; and a tendency to focus on graphical user interfaces (because geoscience data is highly visual in nature) rather than programmatic interfaces. The Marine Geoscience Data Management System (mgDMS; www.marine-geo.org) is an umbrella project based at Lamont-Doherty Earth Observatory that is building data repositories and services for the NSF-funded Ridge2000, MARGINS, and U.S. Antarctic Programs. mgDMS is partnered with several closely-related NSF projects including the Ocean Floor Petrology Database (PetDB), Marine Seismic Data Center (SDC), Sediment Geochemistry Database (SedDB), and others -- all of which include international collaborators and data sets -- and thus provides an excellent testbed to develop interoperability. Toward that end, we are implementing metadata standards and programmatic interfaces to facilitate the discovery and exchange of well-documented data sets. ISO 19115 (published in May 2003 and adopted by ANSI in December 2003) is emerging as an international standard for geoscience metadata, and has been adopted by national standards bodies and agencies in the U.S. (FGDC), E.U., Japan, and others. ISO 19115 defines a comprehensive set of elements for both "discovery" (search) and "markup" (use) metadata, and is easily extensible. We have developed a metadata profile for mgDMS which implements the mandatory elements of 19115, and extends it to accommodate the unique aspects of marine geoscience expedition-based data sets. We have implemented the profile as a lightweight REST-type Web service based on a W3C XML schema and associated XSL stylesheet. Closely related to the development of metadata standards is the development of controlled vocabularies to describe platforms, instruments, etc. The

ETICS: the international software engineering service for the grid

Energy Technology Data Exchange (ETDEWEB)

Meglio, A D; Begin, M-E [CERN (Switzerland); Couvares, P [University of Wisconsin-Madison (United States); Ronchieri, E [INFN CNAF (Italy); Takacs, E [4D SOFT Ltd (Hungary)], E-mail: alberto.di.meglio@cern.ch

2008-07-15

The ETICS system is a distributed software configuration, build and test system designed to fulfil the needs of improving the quality, reliability and interoperability of distributed software in general and grid software in particular. The ETICS project is a consortium of five partners (CERN, INFN, Engineering Ingegneria Informatica, 4D Soft and the University of Wisconsin-Madison). The ETICS service consists of a build and test job execution system based on the Metronome software and an integrated set of web services and software engineering tools to design, maintain and control build and test scenarios. The ETICS system allows taking into account complex dependencies among applications and middleware components and provides a rich environment to perform static and dynamic analysis of the software and execute deployment, system and interoperability tests. This paper gives an overview of the system architecture and functionality set and then describes how the EC-funded EGEE, DILIGENT and OMII-Europe projects are using the software engineering services to build, validate and distribute their software. Finally a number of significant use and test cases will be described to show how ETICS can be used in particular to perform interoperability tests of grid middleware using the grid itself.

ETICS: the international software engineering service for the grid

Science.gov (United States)

Meglio, A. D.; Bégin, M.-E.; Couvares, P.; Ronchieri, E.; Takacs, E.

2008-07-01

The ETICS system is a distributed software configuration, build and test system designed to fulfil the needs of improving the quality, reliability and interoperability of distributed software in general and grid software in particular. The ETICS project is a consortium of five partners (CERN, INFN, Engineering Ingegneria Informatica, 4D Soft and the University of Wisconsin-Madison). The ETICS service consists of a build and test job execution system based on the Metronome software and an integrated set of web services and software engineering tools to design, maintain and control build and test scenarios. The ETICS system allows taking into account complex dependencies among applications and middleware components and provides a rich environment to perform static and dynamic analysis of the software and execute deployment, system and interoperability tests. This paper gives an overview of the system architecture and functionality set and then describes how the EC-funded EGEE, DILIGENT and OMII-Europe projects are using the software engineering services to build, validate and distribute their software. Finally a number of significant use and test cases will be described to show how ETICS can be used in particular to perform interoperability tests of grid middleware using the grid itself.

ETICS: the international software engineering service for the grid

International Nuclear Information System (INIS)

Meglio, A D; Begin, M-E; Couvares, P; Ronchieri, E; Takacs, E

2008-01-01

The ETICS system is a distributed software configuration, build and test system designed to fulfil the needs of improving the quality, reliability and interoperability of distributed software in general and grid software in particular. The ETICS project is a consortium of five partners (CERN, INFN, Engineering Ingegneria Informatica, 4D Soft and the University of Wisconsin-Madison). The ETICS service consists of a build and test job execution system based on the Metronome software and an integrated set of web services and software engineering tools to design, maintain and control build and test scenarios. The ETICS system allows taking into account complex dependencies among applications and middleware components and provides a rich environment to perform static and dynamic analysis of the software and execute deployment, system and interoperability tests. This paper gives an overview of the system architecture and functionality set and then describes how the EC-funded EGEE, DILIGENT and OMII-Europe projects are using the software engineering services to build, validate and distribute their software. Finally a number of significant use and test cases will be described to show how ETICS can be used in particular to perform interoperability tests of grid middleware using the grid itself

Architectures for the Development of the National Interoperability Framework in Romania

Directory of Open Access Journals (Sweden)

Codrin-Florentin NISIOIU

2015-10-01

Full Text Available The authors of Digital Agenda consider that Europe do not take fully advantage of interoperability. They believe that we need effective interoperability between IT products and services to build a truly Digital Society. The Digital Agenda can only be effective if all the elements and applications are interoperable and based on open standards and platforms. In this context, I propose in this article a specific architecture for developing Romanian National Interoperability framework.

The Value of Data and Metadata Standardization for Interoperability in Giovanni

Science.gov (United States)

Smit, C.; Hegde, M.; Strub, R. F.; Bryant, K.; Li, A.; Petrenko, M.

2017-12-01

Giovanni (https://giovanni.gsfc.nasa.gov/giovanni/) is a data exploration and visualization tool at the NASA Goddard Earth Sciences Data Information Services Center (GES DISC). It has been around in one form or another for more than 15 years. Giovanni calculates simple statistics and produces 22 different visualizations for more than 1600 geophysical parameters from more than 90 satellite and model products. Giovanni relies on external data format standards to ensure interoperability, including the NetCDF CF Metadata Conventions. Unfortunately, these standards were insufficient to make Giovanni's internal data representation truly simple to use. Finding and working with dimensions can be convoluted with the CF Conventions. Furthermore, the CF Conventions are silent on machine-friendly descriptive metadata such as the parameter's source product and product version. In order to simplify analyzing disparate earth science data parameters in a unified way, we developed Giovanni's internal standard. First, the format standardizes parameter dimensions and variables so they can be easily found. Second, the format adds all the machine-friendly metadata Giovanni needs to present our parameters to users in a consistent and clear manner. At a glance, users can grasp all the pertinent information about parameters both during parameter selection and after visualization. This poster gives examples of how our metadata and data standards, both external and internal, have both simplified our code base and improved our users' experiences.

Implementing standards for the interoperability among healthcare providers in the public regionalized Healthcare Information System of the Lombardy Region.

Science.gov (United States)

Barbarito, Fulvio; Pinciroli, Francesco; Mason, John; Marceglia, Sara; Mazzola, Luca; Bonacina, Stefano

2012-08-01

Information technologies (ITs) have now entered the everyday workflow in a variety of healthcare providers with a certain degree of independence. This independence may be the cause of difficulty in interoperability between information systems and it can be overcome through the implementation and adoption of standards. Here we present the case of the Lombardy Region, in Italy, that has been able, in the last 10 years, to set up the Regional Social and Healthcare Information System, connecting all the healthcare providers within the region, and providing full access to clinical and health-related documents independently from the healthcare organization that generated the document itself. This goal, in a region with almost 10 millions citizens, was achieved through a twofold approach: first, the political and operative push towards the adoption of the Health Level 7 (HL7) standard within single hospitals and, second, providing a technological infrastructure for data sharing based on interoperability specifications recognized at the regional level for messages transmitted from healthcare providers to the central domain. The adoption of such regional interoperability specifications enabled the communication among heterogeneous systems placed in different hospitals in Lombardy. Integrating the Healthcare Enterprise (IHE) integration profiles which refer to HL7 standards are adopted within hospitals for message exchange and for the definition of integration scenarios. The IHE patient administration management (PAM) profile with its different workflows is adopted for patient management, whereas the Scheduled Workflow (SWF), the Laboratory Testing Workflow (LTW), and the Ambulatory Testing Workflow (ATW) are adopted for order management. At present, the system manages 4,700,000 pharmacological e-prescriptions, and 1,700,000 e-prescriptions for laboratory exams per month. It produces, monthly, 490,000 laboratory medical reports, 180,000 radiology medical reports, 180

Reflections on the role of open source in health information system interoperability.

Science.gov (United States)

Sfakianakis, S; Chronaki, C E; Chiarugi, F; Conforti, F; Katehakis, D G

2007-01-01

This paper reflects on the role of open source in health information system interoperability. Open source is a driving force in computer science research and the development of information systems. It facilitates the sharing of information and ideas, enables evolutionary development and open collaborative testing of code, and broadens the adoption of interoperability standards. In health care, information systems have been developed largely ad hoc following proprietary specifications and customized design. However, the wide deployment of integrated services such as Electronic Health Records (EHRs) over regional health information networks (RHINs) relies on interoperability of the underlying information systems and medical devices. This reflection is built on the experiences of the PICNIC project that developed shared software infrastructure components in open source for RHINs and the OpenECG network that offers open source components to lower the implementation cost of interoperability standards such as SCP-ECG, in electrocardiography. Open source components implementing standards and a community providing feedback from real-world use are key enablers of health care information system interoperability. Investing in open source is investing in interoperability and a vital aspect of a long term strategy towards comprehensive health services and clinical research.

Augmenting interoperability across repositories architectural ideas

CERN Multimedia

CERN. Geneva

2005-01-01

The aDORe digital repository architecture designed and implemented by the Los Alamos Research Library is fully standards-based and highly modular, with the various components of the architecture interacting in a protocol-driven manner. Although aDORe was designed for use in the context of the Los Alamos Library, its modular and standards-based design has led to interesting insights regarding possible new levels of interoperability in a federation of heterogeneous repositories. The presentation will discuss these insights, and will illustrate that attractive federations of repositories can be built by introducing rather basic interoperability requirements. The presentation will also show that, once these requirements are met, a powerful service framework that overlays the federation can emerge.

The common information model CIM IEC 61968/61970 and 62325 : a practical introduction to the CIM

CERN Document Server

Uslar, Mathias; Rohjans, Sebastian; Trefke, Jörn; Vasquez Gonzalez, Jose Manuel

2012-01-01

Within the Smart Grid, the combination of automation equipment, communication technology and IT is crucial. Interoperability of devices and systems can be seen as the key enabler of smart grids. Therefore, international initiatives have been started in order to identify interoperability core standards for Smart Grids.   IEC 62357, the so called Seamless Integration Architecture, is one of these very core standards, which has been identified by recent Smart Grid initiatives and roadmaps to be essential for building and managing intelligent power systems. The Seamless Integration Architecture provides an overview of the interoperability and relations between further standards from IEC TC 57 like the IEC 61970/61968: Common Information Model - CIM.   CIM has proven to be a mature standard for interoperability and engineering; consequently, it is a cornerstone of the IEC Smart Grid Standardization Roadmap. This book provides an overview on how the CIM developed, in which international projects and roadmaps is h...

Hydro One smart meter/smart grid : realizing the vision

Energy Technology Data Exchange (ETDEWEB)

Stevens, R. [Hydro One Networks Inc., Toronto, ON (Canada)

2010-07-01

Ontario's Hydro One Networks has been installing smart meters as part of its smart grid plan since 2007. The smart grid plan forms part of the utility's overall aim to create an energy conservation culture across the province. The utility now has over 1 million installed meters over a 640,000{sup 2} km territory. The smart grid planning team has adopted the use of an upgraded open protocol standards-based communications as part of its 2-way high bandwidth network. The utility is using a 1.8 Ghz worldwide interoperability for microwave access (WiMAX) spectrum designed specifically for the protection of electric utility infrastructure. The utility is now incorporating proof-of-concept applications including automated reclosers, remote terminal units, demand management devices and mobile technologies for use in its smart grid procedures. Various smart zone business scenarios were also described in this power point presentation, as well as details of Hydro One's integration plans for vendors and other power systems. tabs., figs.

Data Modeling Challenges of Advanced Interoperability.

Science.gov (United States)

Blobel, Bernd; Oemig, Frank; Ruotsalainen, Pekka

2018-01-01

Progressive health paradigms, involving many different disciplines and combining multiple policy domains, requires advanced interoperability solutions. This results in special challenges for modeling health systems. The paper discusses classification systems for data models and enterprise business architectures and compares them with the ISO Reference Architecture. On that basis, existing definitions, specifications and standards of data models for interoperability are evaluated and their limitations are discussed. Amendments to correctly use those models and to better meet the aforementioned challenges are offered.

AliEn - EDG Interoperability in ALICE

CERN Document Server

Bagnasco, S; Buncic, P; Carminati, F; Cerello, P G; Saiz, P

2003-01-01

AliEn (ALICE Environment) is a GRID-like system for large scale job submission and distributed data management developed and used in the context of ALICE, the CERN LHC heavy-ion experiment. With the aim of exploiting upcoming Grid resources to run AliEn-managed jobs and store the produced data, the problem of AliEn-EDG interoperability was addressed and an in-terface was designed. One or more EDG (European Data Grid) User Interface machines run the AliEn software suite (Cluster Monitor, Storage Element and Computing Element), and act as interface nodes between the systems. An EDG Resource Broker is seen by the AliEn server as a single Computing Element, while the EDG storage is seen by AliEn as a single, large Storage Element; files produced in EDG sites are registered in both the EDG Replica Catalogue and in the AliEn Data Catalogue, thus ensuring accessibility from both worlds. In fact, both registrations are required: the AliEn one is used for the data management, the EDG one to guarantee the integrity and...

Enhancing Data Interoperability with Web Services

Science.gov (United States)

Shrestha, S. R.; Zimble, D. A.; Wang, W.; Herring, D.; Halpert, M.

2014-12-01

In an effort to improve data access and interoperability of climate and weather data, the National Oceanic and Atmospheric Administration's (NOAA) Climate.gov and Climate Prediction Center (CPC) are exploring various platform solutions to enhance a user's ability to locate, preview, and acquire the data. The Climate.gov and CPC data team faces multiple challenges including the various kinds of data and formats, inconsistency of metadata records, variety of data service implementations, very large volumes of data and geographically distributed locations. We have created the Data Access and Interoperability project to design a web-based platform, where interoperability between systems can be leveraged to allow greater data discovery, access, visualization and delivery. In the interoperable data platform, systems can integrate with each other to support the synthesis of climate and weather data. Interoperability is the ability for users to discover the available climate and weather data, preview and interact with the data, and acquire the data in common digital formats through a simple web-based interface. The goal of the interoperable data platform is to leverage existing web services, implement the established standards and integrate with existing solutions across the earth sciences domain instead of creating new technologies. Towards this effort to improve the interoperability of the platform, we are collaborating with ESRI Inc. to provide climate and weather data via web services. In this presentation, we will discuss and demonstrate how to use ArcGIS to author RESTful based scientific web services using open standards. These web services are able to encapsulate the logic required to handle and describe scientific data through a variety of service types including, image, map, feature, geoprocessing, and their respective service methods. Combining these types of services and leveraging well-documented APIs, including the ArcGIS JavaScript API, we can afford to

A logical approach to semantic interoperability in healthcare.

Science.gov (United States)

Bird, Linda; Brooks, Colleen; Cheong, Yu Chye; Tun, Nwe Ni

2011-01-01

Singapore is in the process of rolling out a number of national e-health initiatives, including the National Electronic Health Record (NEHR). A critical enabler in the journey towards semantic interoperability is a Logical Information Model (LIM) that harmonises the semantics of the information structure with the terminology. The Singapore LIM uses a combination of international standards, including ISO 13606-1 (a reference model for electronic health record communication), ISO 21090 (healthcare datatypes), and SNOMED CT (healthcare terminology). The LIM is accompanied by a logical design approach, used to generate interoperability artifacts, and incorporates mechanisms for achieving unidirectional and bidirectional semantic interoperability.

Risk Management Considerations for Interoperable Acquisition

National Research Council Canada - National Science Library

Meyers, B. C

2006-01-01

.... The state of risk management practice -- the specification of standards and the methodologies to implement them -- is addressed and examined with respect to the needs of system-of-systems interoperability...

A roadmap for caGrid, an enterprise Grid architecture for biomedical research.

Science.gov (United States)

Saltz, Joel; Hastings, Shannon; Langella, Stephen; Oster, Scott; Kurc, Tahsin; Payne, Philip; Ferreira, Renato; Plale, Beth; Goble, Carole; Ervin, David; Sharma, Ashish; Pan, Tony; Permar, Justin; Brezany, Peter; Siebenlist, Frank; Madduri, Ravi; Foster, Ian; Shanbhag, Krishnakant; Mead, Charlie; Chue Hong, Neil

2008-01-01

caGrid is a middleware system which combines the Grid computing, the service oriented architecture, and the model driven architecture paradigms to support development of interoperable data and analytical resources and federation of such resources in a Grid environment. The functionality provided by caGrid is an essential and integral component of the cancer Biomedical Informatics Grid (caBIG) program. This program is established by the National Cancer Institute as a nationwide effort to develop enabling informatics technologies for collaborative, multi-institutional biomedical research with the overarching goal of accelerating translational cancer research. Although the main application domain for caGrid is cancer research, the infrastructure provides a generic framework that can be employed in other biomedical research and healthcare domains. The development of caGrid is an ongoing effort, adding new functionality and improvements based on feedback and use cases from the community. This paper provides an overview of potential future architecture and tooling directions and areas of improvement for caGrid and caGrid-like systems. This summary is based on discussions at a roadmap workshop held in February with participants from biomedical research, Grid computing, and high performance computing communities.

1998 Annual Study Report. Standardization for securing interoperability between optical disk systems; 1998 nendo seika hokokusho. Hikari disk system no sogo un'yosei kakuho no tame no hyojunka

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This R and D program is aimed at securing interoperability between optical disk systems, based on the logical formats, to propose the draft international standards. For the volume/file structures proposed by ISO/IEC 13346, the universal disk format (UDF) proposed by the Optical Storage Technology Association (OSTA) is taken as the target file system, to improve the conformance test environments and develop the standards for advanced interoperability. The 1998 R and D themes include development of the UDF conformance testing tools for avoiding the interoperability-related problems involved in the UDF, which are actually observed, and investigations on the UAF specifications and preparation of the UAF-related standard evaluation systems for preparation of the draft standards for the Universal Accessible Filesystem (UAF), planned to be conducted in and after the next fiscal year, which allows, e.g., network seamless application of a variety of the future optical disks. (NEDO)

Standardized UXO Demonstration Site Blind Grid Scoring Record No. 690

National Research Council Canada - National Science Library

Overbay, Larry, Jr; Archiable, Robert; McClung, Christina; Robitaille, George

2005-01-01

...) utilizing the YPG Standardized UXO Technology Demonstration Site Blind Grid. The scoring record was coordinated by Larry Overbay and by the Standardized UXO Technology Demonstration Scoring Committee...

Standardized UXO Technology Demonstration Site Blind Grid Scoring Record #833

National Research Council Canada - National Science Library

Fling, Rick; McClung, Christina; Burch, William; McDonnell, Patrick

2007-01-01

...) utilizing the APG Standardized UXO Technology Demonstration Site Blind Grid. This Scoring Record was coordinated by Dennis Teefy and the Standardized UXO Technology Demonstration Site Scoring Committee...

Experiences with the GLUE information schema in the LCG/EGEE production grid

International Nuclear Information System (INIS)

Burke, S; Andreozzi, S; Field, L

2008-01-01

A common information schema for the description of Grid resources and services is an essential requirement for interoperating Grid infrastructures, and its implementation interacts with every Grid component. In this context, the GLUE information schema was originally defined in 2002 as a joint project between the European DataGrid and DataTAG projects and the US iVDGL. The schema has major components to describe Computing and Storage Elements, and also generic Service and Site information. It has been used extensively in the LCG/EGEE Grid, for job submission, data management, service discovery and monitoring. In this paper we present the experience gained over the last five years, highlighting both successes and problems. In particular, we consider the importance of having a clear definition of schema attributes; the construction of standard information providers and difficulties encountered in mapping an abstract schema to diverse real systems; the configuration of publication in a way which suits system managers and the varying characteristics of Grid sites; the validation of published information; the ways in which information can be used (and misused) by Grid services and users; and issues related to managing schema upgrades in a large distributed system

Use of CAPE-OPEN standards in the interoperability between modelling tools (MoT) and process simulators (ProSim)

DEFF Research Database (Denmark)

Morales Rodriguez, Ricardo; Gani, Rafiqul; Déchelotte, Stéphane

2008-01-01

Computer-aided design, analysis and/or operation of chemical products and processes that manufacture them require a number of computational tools. As these tools may come from different sources and disciplines, an important issue is how they can be used simultaneously and efficiently for the design...... computational tools according to problem specific work-flows/data-flows. The reliability of the integration of different tools is illustrated through two case studies. In case study 1, the tools Simulis® Thermodynamics (PME) and ICAS-MoT (PMC) are combined for the calculation of thermodynamic properties through......SimPlus-ICAS-MoT-COFE interoperability is also carried out successfully to proof the interoperability of the different computational entities. Furthermore, the introduction of the multiscale modelling concept and its application through the CAPE-OPEN standards is highlighted....

PERSPECTIVES ON INTEROPERABILITY INTEGRATION WITHIN NATO DEFENSE PLANNING PROCESS

Directory of Open Access Journals (Sweden)

Florian CIOCAN

2011-01-01

Full Text Available Interoperability is not a new area of effort at NATO level. In fact, interoperability and more specifi cally standardization, has been a key element of the Alliance’s approach to fi elding forces for decades. But as the security and operational environment has been in a continuous change, the need to face the new threats and the current involvement in challenging operations in Afghanistan and elsewhere alongside with the necessity to interoperate at lower and lower levels of command with an increasing number of nations, including non-NATO ISAF partners, NGOs, and other organizations, have made the task even more challenging. In this respect Interoperability Integration within NATO Defense Planning Process will facilitate the timely identifi cation, development and delivery of required forces and capabilities that are interoperable and adequately prepared, equipped, trained and supported to undertake the Alliance’s full spectrum of missions.

A Guide to Understanding Emerging Interoperability Technologies

National Research Council Canada - National Science Library

Bollinger, Terry

2000-01-01

.... Over time, individual interoperability problems tend to disappear as the resources involved literally become part of one system through integration and standardization, but the overall problem...

The eXtensible ontology development (XOD) principles and tool implementation to support ontology interoperability.

Science.gov (United States)

He, Yongqun; Xiang, Zuoshuang; Zheng, Jie; Lin, Yu; Overton, James A; Ong, Edison

2018-01-12

Ontologies are critical to data/metadata and knowledge standardization, sharing, and analysis. With hundreds of biological and biomedical ontologies developed, it has become critical to ensure ontology interoperability and the usage of interoperable ontologies for standardized data representation and integration. The suite of web-based Ontoanimal tools (e.g., Ontofox, Ontorat, and Ontobee) support different aspects of extensible ontology development. By summarizing the common features of Ontoanimal and other similar tools, we identified and proposed an "eXtensible Ontology Development" (XOD) strategy and its associated four principles. These XOD principles reuse existing terms and semantic relations from reliable ontologies, develop and apply well-established ontology design patterns (ODPs), and involve community efforts to support new ontology development, promoting standardized and interoperable data and knowledge representation and integration. The adoption of the XOD strategy, together with robust XOD tool development, will greatly support ontology interoperability and robust ontology applications to support data to be Findable, Accessible, Interoperable and Reusable (i.e., FAIR).

77 FR 38768 - Smart Grid Advisory Committee

Science.gov (United States)

2012-06-29

...The Smart Grid Advisory Committee (SGAC or Committee) will hold a meeting via teleconference on Friday, July 27, 2012 from 11 a.m. to 2 p.m. Eastern Time (ET). The primary purposes of this meeting are to review updates on the Smart Grid Interoperability Panel transition plan, review the status of the research subcommittee and the August Smart Grid Workshop in Boulder, Colorado, and plan for a fall meeting. Interested members of the public will be able to participate in the meeting from remote locations by calling into a central phone number.

Enabling interoperability in planetary sciences and heliophysics: The case for an information model

Science.gov (United States)

Hughes, J. Steven; Crichton, Daniel J.; Raugh, Anne C.; Cecconi, Baptiste; Guinness, Edward A.; Isbell, Christopher E.; Mafi, Joseph N.; Gordon, Mitchell K.; Hardman, Sean H.; Joyner, Ronald S.

2018-01-01

The Planetary Data System has developed the PDS4 Information Model to enable interoperability across diverse science disciplines. The Information Model is based on an integration of International Organization for Standardization (ISO) level standards for trusted digital archives, information model development, and metadata registries. Where controlled vocabularies provides a basic level of interoperability by providing a common set of terms for communication between both machines and humans the Information Model improves interoperability by means of an ontology that provides semantic information or additional related context for the terms. The information model was defined by team of computer scientists and science experts from each of the diverse disciplines in the Planetary Science community, including Atmospheres, Geosciences, Cartography and Imaging Sciences, Navigational and Ancillary Information, Planetary Plasma Interactions, Ring-Moon Systems, and Small Bodies. The model was designed to be extensible beyond the Planetary Science community, for example there are overlaps between certain PDS disciplines and the Heliophysics and Astrophysics disciplines. "Interoperability" can apply to many aspects of both the developer and the end-user experience, for example agency-to-agency, semantic level, and application level interoperability. We define these types of interoperability and focus on semantic level interoperability, the type of interoperability most directly enabled by an information model.

Implementation and Evaluation of Four Interoperable Open Standards for the Internet of Things

Science.gov (United States)

Jazayeri, Mohammad Ali; Liang, Steve H. L.; Huang, Chih-Yuan

2015-01-01

Recently, researchers are focusing on a new use of the Internet called the Internet of Things (IoT), in which enabled electronic devices can be remotely accessed over the Internet. As the realization of IoT concept is still in its early stages, manufacturers of Internet-connected devices and IoT web service providers are defining their proprietary protocols based on their targeted applications. Consequently, IoT becomes heterogeneous in terms of hardware capabilities and communication protocols. Addressing these heterogeneities by following open standards is a necessary step to communicate with various IoT devices. In this research, we assess the feasibility of applying existing open standards on resource-constrained IoT devices. The standard protocols developed in this research are OGC PUCK over Bluetooth, TinySOS, SOS over CoAP, and OGC SensorThings API. We believe that by hosting open standard protocols on IoT devices, not only do the devices become self-describable, self-contained, and interoperable, but innovative applications can also be easily developed with standardized interfaces. In addition, we use memory consumption, request message size, response message size, and response latency to benchmark the efficiency of the implemented protocols. In all, this research presents and evaluates standard-based solutions to better understand the feasibility of applying existing standards to the IoT vision. PMID:26402683

Implementation and Evaluation of Four Interoperable Open Standards for the Internet of Things.

Science.gov (United States)

Jazayeri, Mohammad Ali; Liang, Steve H L; Huang, Chih-Yuan

2015-09-22

Recently, researchers are focusing on a new use of the Internet called the Internet of Things (IoT), in which enabled electronic devices can be remotely accessed over the Internet. As the realization of IoT concept is still in its early stages, manufacturers of Internet-connected devices and IoT web service providers are defining their proprietary protocols based on their targeted applications. Consequently, IoT becomes heterogeneous in terms of hardware capabilities and communication protocols. Addressing these heterogeneities by following open standards is a necessary step to communicate with various IoT devices. In this research, we assess the feasibility of applying existing open standards on resource-constrained IoT devices. The standard protocols developed in this research are OGC PUCK over Bluetooth, TinySOS, SOS over CoAP, and OGC SensorThings API. We believe that by hosting open standard protocols on IoT devices, not only do the devices become self-describable, self-contained, and interoperable, but innovative applications can also be easily developed with standardized interfaces. In addition, we use memory consumption, request message size, response message size, and response latency to benchmark the efficiency of the implemented protocols. In all, this research presents and evaluates standard-based solutions to better understand the feasibility of applying existing standards to the IoT vision.

77 FR 19575 - Promoting Interoperability in the 700 MHz Commercial Spectrum; Interoperability of Mobile User...

Science.gov (United States)

2012-04-02

... efforts and/or through modifications to the Commission's technical rules or other regulatory measures. The... regulatory measures. \\1\\ The Commission has a longstanding interest in promoting the interoperability of... standards for Long-Term Evolution (LTE) wireless broadband technology are developed by the 3rd Generation...

Ecosystem Based Business Model of Smart Grid

DEFF Research Database (Denmark)

Lundgaard, Morten Raahauge; Ma, Zheng; Jørgensen, Bo Nørregaard

2015-01-01

This paper tries to investigate the ecosystem based business model in a smart grid infrastructure and the potential of value capture in the highly complex macro infrastructure such as smart grid. This paper proposes an alternative perspective to study the smart grid business ecosystem to support...... the infrastructural challenges, such as the interoperability of business components for smart grid. So far little research has explored the business ecosystem in the smart grid concept. The study on the smart grid with the theory of business ecosystem may open opportunities to understand market catalysts. This study...... contributes an understanding of business ecosystem applicable for smart grid. Smart grid infrastructure is an intricate business ecosystem, which have several intentions to deliver the value proposition and what it should be. The findings help to identify and capture value from markets....

The DFG Viewer for Interoperability in Germany

Directory of Open Access Journals (Sweden)

Ralf Goebel

2010-02-01

Full Text Available This article deals with the DFG Viewer for Interoperability, a free and open source web-based viewer for digitised books, and assesses its relevance for interoperability in Germany. First the specific situation in Germany is described, including the important role of the Deutsche Forschungsgemeinschaft (German Research Foundation. The article then moves on to the overall concept of the viewer and its technical background. It introduces the data formats and standards used, it briefly illustrates how the viewer works and includes a few examples.

Examining the Relationship between Electronic Health Record Interoperability and Quality Management

Science.gov (United States)

Purcell, Bernice M.

2013-01-01

A lack of interoperability impairs data quality among health care providers' electronic health record (EHR) systems. The problem is whether the International Organization for Standardization (ISO) 9000 principles relate to the problem of interoperability in implementation of EHR systems. The purpose of the nonexperimental quantitative research…

Intercloud Architecture for interoperability and integration

NARCIS (Netherlands)

Demchenko, Y.; Makkes, M.X.; Strijkers, R.J.; Laat, C. de

2012-01-01

This paper presents on-going research to develop the Intercloud Architecture Framework (ICAF) that addresses problems in multi-provider multi-domain heterogeneous cloud based infrastructure services and applications integration and interoperability. The paper refers to existing standards in Cloud

Intercloud architecture for interoperability and integration

NARCIS (Netherlands)

Demchenko, Y.; Makkes, M.X.; Strijkers, R.; de Laat, C.

2012-01-01

This paper presents on-going research to develop the Intercloud Architecture Framework (ICAF) that addresses problems in multi-provider multi-domain heterogeneous cloud based infrastructure services and applications integration and interoperability. The paper refers to existing standards in Cloud

Standardized UXO Technology Demonstration Site, Blind Grid Scoring Record Number 842

National Research Council Canada - National Science Library

Karwatka, Michael; Fling, Rick; McClung, Christina; Banta, Matthew; Burch, William; McDonnell, Patrick

2007-01-01

...) utilizing the APG Standardized UXO Technology Demonstration Site Blind Grid. This Scoring Record was coordinated by Michael Karwatka and the Standardized UXO Technology Demonstration Site Scoring Committee...

Standardized UXO Technology Demonstration Site Blind Grid Scoring Record No. 805

National Research Council Canada - National Science Library

Karwatka, Michael; Fling, Rick; McClung, Christina

2007-01-01

...) utilizing the YPG Standardized UXO Technology Demonstration Site Blind Grid. This Scoring Record was coordinated by Michael Karwatka and the Standardized UXO Technology Demonstration Site Scoring Committee...

Standardized UXO Technology Demonstration Site Blind Grid Scoring Record Number 312

National Research Council Canada - National Science Library

Overbay, Larry, Jr; Archiable, Robert; McClung, Christina; Robitaille, George

2005-01-01

...) utilizing the YPG Standardized UXO Technology Demonstration Site Blind Grid. The scoring record was coordinated by Larry Overbay and by the Standardized UXO Technology Demonstration Scoring Committee...

Standardized UXO Technology Demonstration Site Blind Grid Scoring Record No. 769

National Research Council Canada - National Science Library

Archiable, Robert; Fling, Rick; McClung, Christina; Teefy, Dennis; Burch, William; Packer, Bonnie; Banta, Matthew

2006-01-01

...) utilizing the YPG Standardized UXO Technology Demonstration Site Blind Grid. Scoring Records have been coordinated by Dennis Teefy and the Standardized UXO Technology Demonstration Site Scoring Committee...

Standardized UXO Technology Demonstration Site Blind Grid Scoring Record No. 792

National Research Council Canada - National Science Library

Karwatka, Mike; Packer, Bonnie

2006-01-01

...) utilizing the APG Standardized UXO Technology Demonstration Site Blind Grid. Scoring Records have been coordinated by Mike Karwatka and the Standardized UXO Technology Demonstration Site Scoring Committee...

Standardized UXO Technology Demonstration Site, Blind Grid Scoring Record No. 257

National Research Council Canada - National Science Library

Overbay, Larry, Jr; Robitaille, George; Boutin, Matthew; Fling, Rick; McClung, Christina

2005-01-01

...) utilizing the APG Standardized UXO Technology Demonstration Site Blind Grid. The scoring record was coordinated by Larry Overbay and the Standardized UXO Technology Demonstration Site Scoring Committee...

Standardized UXO Technology Demonstration Site Blind Grid Scoring Record No. 830

National Research Council Canada - National Science Library

Teefy, Dennis

2007-01-01

...) utilizing the APG Standardized UXO Technology Demonstration Site Blind Grid. This Scoring Record was coordinated by Dennis Teefy and the Standardized UXO Technology Demonstration Site Scoring Committee...

Standardized UXO Technology Demonstration Site Blind Grid Scoring Record No. 834

National Research Council Canada - National Science Library

Teefy, Dennis; Fling, Rick; McClung, Christina

2007-01-01

...) utilizing the APG Standardized UXO Technology Demonstration Site Blind Grid. This Scoring Record was coordinated by Dennis Teefy and the Standardized UXO Technology Demonstration Site Scoring Committee...

Standardized UXO Technology Demonstration Site Blind Grid Scoring Record No. 252

National Research Council Canada - National Science Library

Overbay, Larry, Jr; Boutin, Matthew; Fling, Rick; McClung, Christina

2005-01-01

...) utilizing the APG Standardized UXO Technology Demonstration Site Blind Grid. The scoring record was coordinated by Larry Overbay and the Standardized UXO Technology Demonstration Site Scoring Committee...

Standardized UXO Technology Demonstration Site Blind Grid Scoring Record Number 691

National Research Council Canada - National Science Library

Overbay, Jr., Larry; Watts, Kimberly; Fling, Rick; McClung, Christina; Banta, Matthew

2006-01-01

...) utilizing the APG Standardized UXO Technology Demonstration Site blind grid. Scoring Records have been coordinated by Larry Overbay and the Standardized UXO Technology Demonstration Site Scoring Committee...

Standardized UXO Technology Demonstration Site Blind Grid Scoring Record No. 832

National Research Council Canada - National Science Library

Teefy, Dennis

2007-01-01

...) utilizing the APG Standardized UXO Technology Demonstration Site Blind Grid. This Scoring Record was coordinated by Dennis Teefy and the Standardized UXO Technology Demonstration Site Scoring Committee...

Standardized UXO Technology Demonstration Site, Blind Grid Scoring Record No. 237

National Research Council Canada - National Science Library

Overbay, Larry, Jr; Robitaille, George; Boutin, Matthew; Fling, Rick; McClung, Christina

2005-01-01

...) utilizing the APG Standardized UXO Technology Demonstration Site Blind Grid. The scoring record was coordinated by Larry Overbay and the Standardized UXO Technology Demonstration Site Scoring Committee...

Standardized UXO Technology Demonstration Site Blind Grid Scoring Record No. 764

National Research Council Canada - National Science Library

Overbay, Larry; Watts, Kimberly

2006-01-01

...) utilizing the APG Standardized UXO Technology Demonstration Site Blind Grid. Scoring Records have been coordinated by Larry Overbay and the Standardized UXO Technology Demonstration Site Scoring Committee...

Standardized UXO Technology Demonstration Site Blind Grid Scoring Record No. 831

National Research Council Canada - National Science Library

Teefy, Dennis

2007-01-01

...) utilizing the APG Standardized UXO Technology Demonstration Site Blind Grid. This Scoring Record was coordinated by Dennis Teefy and the Standardized UXO Technology Demonstration Site Scoring Committee...

Standardized UXO Technology Demonstration Site Blind Grid Scoring Record No. 690

National Research Council Canada - National Science Library

Overbay, Larry

2005-01-01

...) utilizing the YPC Standardized UXO Technology Demonstration Site Blind Grid. The scoring record was coordinated by Larry Overbay and by the Standardized UXO Technology Demonstration Scoring Committee...

Standardized UXO Technology Demonstration Site Blind Grid Scoring Record No. 396

National Research Council Canada - National Science Library

Overbay, Larry, Jr; Boutin, Matthew; Fling, Rick; McClung, Christina; Robitaille, George

2005-01-01

...) utilizing the APG Standardized UXO technology Demonstration Site Blind Grid. The scoring record was coordinated by Larry Overbay and by the Standardized UXO Technology Demonstration Site Scoring Committee...

Standardized UXO Technology Demonstration Site Blind Grid Scoring Record No. 268

National Research Council Canada - National Science Library

Overbay, Larry, Jr; Fling, Rick; McClung, Christina; Robitaille, George

2005-01-01

...) utilizing the APG Standardized UXO Technology Demonstration Site Blind Grid. The scoring record was coordinated by Larry Overbay and by the Standardized UXO Technology Demonstration Site Scoring Committee...

Standardized UXO Technology Demonstration Site, Blind Grid Scoring Record No. 898

National Research Council Canada - National Science Library

Burch, William; Fling, Rick; McClung, Christina; Lombardo, Leonardo; McDonnell, Patrick

2008-01-01

...) utilizing the APG Standardized UXO Technology Demonstration Site Blind Grid Field. This Scoring Record was coordinated by William Burch and the Standardized UXO Technology Demonstration Site Scoring Committee...

Standardized UXO Technology Demonstration Site, Blind Grid Scoring Record No. 896

National Research Council Canada - National Science Library

Burch, William; Fling, Rick; McClung, Christina

2008-01-01

...) utilizing the APG Standardized UXO Technology Demonstration Site Blind Grid Field. This Scoring Record was coordinated by William Burch and the Standardized UXO Technology Demonstration Site Scoring Committee...

Standardized UXO Technology Demonstration Site, Blind Grid Scoring Record Number 431

National Research Council Canada - National Science Library

Overbay, Larry; Robitaille, George

2005-01-01

...) utilizing the YPG Standardized UXO Technology Demonstration Site Blind Grid. The scoring record was coordinated by Larry Overbay and by the Standardized UXO Technology Demonstration Site Scoring Committee...

Standardized UXO Technology Demonstration Site, Blind Grid Scoring Record No. 397

National Research Council Canada - National Science Library

Overbay, Larry, Jr; Robitaille, George; Boutin, Matthew; Fling, Rick; McClung, Christina

2005-01-01

...) utilizing the APG Standardized UXO Technology Demonstration Site Blind Grid. The scoring record was coordinated by Larry Overbay and by the Standardized UXO Technology Demonstration Site Scoring Committee...

Standardized UXO Technology Demonstration Site, Blind Grid Scoring Record No. 671

National Research Council Canada - National Science Library

Overbay, Larry; Robitaille, George

2005-01-01

... (UXO) utilizing the APG Standardized UXO Technology Demonstration Site Blind Grid. The scoring record was coordinated by Larry Overbay and by the Standardized UXO Technology Deomostration Site Scoring Committee...

Visual Development Environment for Semantically Interoperable Smart Cities Applications

OpenAIRE

Roukounaki , Aikaterini; Soldatos , John; Petrolo , Riccardo; Loscri , Valeria; Mitton , Nathalie; Serrano , Martin

2015-01-01

International audience; This paper presents an IoT architecture for the semantic interoperability of diverse IoT systems and applications in smart cities. The architecture virtualizes diverse IoT systems and ensures their modelling and representation according to common standards-based IoT ontologies. Furthermore, based on this architecture, the paper introduces a first-of-a-kind visual development environment which eases the development of semantically interoperable applications in smart cit...

Standardized UXO Technology Demonstration Site Blind Grid Scoring Record No. 213

National Research Council Canada - National Science Library

Overbay, Larry; Archiable, Robert; McClung, Christina; Robitaille, George

2005-01-01

... (UXO) utilizing the YPG Standardized UXO Technology Demonstration Site Blind Grid. The scoring record was coordinated by Larry Overbay and by the Standardized UXO Technology Demonstration Site Site Scoring Committee...

A Survey on Next-generation Power Grid Data Architecture

Energy Technology Data Exchange (ETDEWEB)

You, Shutang [University of Tennessee, Knoxville (UTK); Zhu, Dr. Lin [University of Tennessee (UT); Liu, Yong [ORNL; Liu, Yilu [ORNL; Shankar, Mallikarjun (Arjun) [ORNL; Robertson, Russell [Grid Protection Alliance; King Jr, Thomas J [ORNL

2015-01-01

The operation and control of power grids will increasingly rely on data. A high-speed, reliable, flexible and secure data architecture is the prerequisite of the next-generation power grid. This paper summarizes the challenges in collecting and utilizing power grid data, and then provides reference data architecture for future power grids. Based on the data architecture deployment, related research on data architecture is reviewed and summarized in several categories including data measurement/actuation, data transmission, data service layer, data utilization, as well as two cross-cutting issues, interoperability and cyber security. Research gaps and future work are also presented.

The Impact of Grid on Health Care Digital Repositories

CERN Document Server

Donno, Flavia; CERN. Geneva. IT Department

2008-01-01

Grid computing has attracted worldwide attention in a variety of applications like Health Care. In this paper we identified the Grid services that could facilitate the integration and interoperation of Health Care data and frameworks world-wide. While many of the current Health Care Grid projects address issues such as data location and description on the Grid and the security aspects, the problems connected to data storage, integrity, preservation and distribution have been neglected. We describe the currently available Grid storage services and protocols that can come in handy when dealing with those problems. We further describe a Grid infrastructure to build a cooperative Health Care environment based on currently available Grid services and a service able to validate it.

Customized smart grids, a practical test. No standard solution in sight; Massgeschneiderte Smart Grids im Praxistest. Keine einheitliche Loesung in Sicht

Energy Technology Data Exchange (ETDEWEB)

Mrosik, Jan [Siemens AG (Germany). Bereich Energy Automation

2011-09-05

Smart grids are viewed as a universal solution to the increasingly complex problems of power supply. It is correct that smart grids will be indispensable in future power supply, it is wrong to assume that there will be a standardized and universal solution. Customized systems are required as grids tend to differ greatly.

Modelling and approaching pragmatic interoperability of distributed geoscience data

Science.gov (United States)

Ma, Xiaogang

2010-05-01

Interoperability of geodata, which is essential for sharing information and discovering insights within a cyberinfrastructure, is receiving increasing attention. A key requirement of interoperability in the context of geodata sharing is that data provided by local sources can be accessed, decoded, understood and appropriately used by external users. Various researchers have discussed that there are four levels in data interoperability issues: system, syntax, schematics and semantics, which respectively relate to the platform, encoding, structure and meaning of geodata. Ontology-driven approaches have been significantly studied addressing schematic and semantic interoperability issues of geodata in the last decade. There are different types, e.g. top-level ontologies, domain ontologies and application ontologies and display forms, e.g. glossaries, thesauri, conceptual schemas and logical theories. Many geodata providers are maintaining their identified local application ontologies in order to drive standardization in local databases. However, semantic heterogeneities often exist between these local ontologies, even though they are derived from equivalent disciplines. In contrast, common ontologies are being studied in different geoscience disciplines (e.g., NAMD, SWEET, etc.) as a standardization procedure to coordinate diverse local ontologies. Semantic mediation, e.g. mapping between local ontologies, or mapping local ontologies to common ontologies, has been studied as an effective way of achieving semantic interoperability between local ontologies thus reconciling semantic heterogeneities in multi-source geodata. Nevertheless, confusion still exists in the research field of semantic interoperability. One problem is caused by eliminating elements of local pragmatic contexts in semantic mediation. Comparing to the context-independent feature of a common domain ontology, local application ontologies are closely related to elements (e.g., people, time, location

Towards technical interoperability in telemedicine.

Energy Technology Data Exchange (ETDEWEB)

Craft, Richard Layne, II

2004-05-01

For telemedicine to realize the vision of anywhere, anytime access to care, the question of how to create a fully interoperable technical infrastructure must be addressed. After briefly discussing how 'technical interoperability' compares with other types of interoperability being addressed in the telemedicine community today, this paper describes reasons for pursuing technical interoperability, presents a proposed framework for realizing technical interoperability, identifies key issues that will need to be addressed if technical interoperability is to be achieved, and suggests a course of action that the telemedicine community might follow to accomplish this goal.

Enterprise interoperability VI : Interoperability for Agility, Resilience and Plasticity of Collaboration

CERN Document Server

Bénaben, Frédérick; Poler, Raúl; Bourrières, Jean-Paul

2014-01-01

A concise reference to the state of the art in systems interoperability, Enterprise Interoperability VI will be of great value to engineers and computer scientists working in manufacturing and other process industries and to software engineers and electronic and manufacturing engineers working in the academic environment. Over 40 papers, ranging from academic research through case studies to industrial and administrative experience of interoperability show how, in a scenario of globalised markets, where the capacity to cooperate with other firms efficiently starts to become essential in order to remain in the market in an economically, socially and environmentally cost-effective manner, the most innovative enterprises are beginning to redesign their business model to become interoperable. This goal of interoperability is essential, not only from the perspective of the individual enterprise but also in the new business structures that are now emerging, such as supply chains, virtual enterprises, interconnected...

Interoperability as a quality label for portable & wearable health monitoring systems.

Science.gov (United States)

Chronaki, Catherine E; Chiarugi, Franco

2005-01-01

Advances in ICT promising universal access to high quality care, reduction of medical errors, and containment of health care costs, have renewed interest in electronic health records (EHR) standards and resulted in comprehensive EHR adoption programs in many European states. Health cards, and in particular the European health insurance card, present an opportunity for instant cross-border access to emergency health data including allergies, medication, even a reference ECG. At the same time, research and development in miniaturized medical devices and wearable medical sensors promise continuous health monitoring in a comfortable, flexible, and fashionable way. These trends call for the seamless integration of medical devices and intelligent wearables into an active EHR exploiting the vast information available to increase medical knowledge and establish personal wellness profiles. In a mobile connected world with empowered health consumers and fading barriers between health and healthcare, interoperability has a strong impact on consumer trust. As a result, current interoperability initiatives are extending the traditional standardization process to embrace implementation, validation, and conformance testing. In this paper, starting from the OpenECG initiative, which promotes the consistent implementation of interoperability standards in electrocardiography and supports a worldwide community with data sets, open source tools, specifications, and online conformance testing, we discuss EHR interoperability as a quality label for personalized health monitoring systems. Such a quality label would support big players and small enterprises in creating interoperable eHealth products, while opening the way for pervasive healthcare and the take-up of the eHealth market.

The next generation of interoperability agents in healthcare.

Science.gov (United States)

Cardoso, Luciana; Marins, Fernando; Portela, Filipe; Santos, Manuel; Abelha, António; Machado, José

2014-05-16

Interoperability in health information systems is increasingly a requirement rather than an option. Standards and technologies, such as multi-agent systems, have proven to be powerful tools in interoperability issues. In the last few years, the authors have worked on developing the Agency for Integration, Diffusion and Archive of Medical Information (AIDA), which is an intelligent, agent-based platform to ensure interoperability in healthcare units. It is increasingly important to ensure the high availability and reliability of systems. The functions provided by the systems that treat interoperability cannot fail. This paper shows the importance of monitoring and controlling intelligent agents as a tool to anticipate problems in health information systems. The interaction between humans and agents through an interface that allows the user to create new agents easily and to monitor their activities in real time is also an important feature, as health systems evolve by adopting more features and solving new problems. A module was installed in Centro Hospitalar do Porto, increasing the functionality and the overall usability of AIDA.

The Next Generation of Interoperability Agents in Healthcare

Directory of Open Access Journals (Sweden)

Luciana Cardoso

2014-05-01

Full Text Available Interoperability in health information systems is increasingly a requirement rather than an option. Standards and technologies, such as multi-agent systems, have proven to be powerful tools in interoperability issues. In the last few years, the authors have worked on developing the Agency for Integration, Diffusion and Archive of Medical Information (AIDA, which is an intelligent, agent-based platform to ensure interoperability in healthcare units. It is increasingly important to ensure the high availability and reliability of systems. The functions provided by the systems that treat interoperability cannot fail. This paper shows the importance of monitoring and controlling intelligent agents as a tool to anticipate problems in health information systems. The interaction between humans and agents through an interface that allows the user to create new agents easily and to monitor their activities in real time is also an important feature, as health systems evolve by adopting more features and solving new problems. A module was installed in Centro Hospitalar do Porto, increasing the functionality and the overall usability of AIDA.

Performance evaluation of grid-enabled registration algorithms using bronze-standards

CERN Document Server

Glatard, T; Montagnat, J

2006-01-01

Evaluating registration algorithms is difficult due to the lack of gold standard in most clinical procedures. The bronze standard is a real-data based statistical method providing an alternative registration reference through a computationally intensive image database registration procedure. We propose in this paper an efficient implementation of this method through a grid-interfaced workflow enactor enabling the concurrent processing of hundreds of image registrations in a couple of hours only. The performances of two different grid infrastructures were compared. We computed the accuracy of 4 different rigid registration algorithms on longitudinal MRI images of brain tumors. Results showed an average subvoxel accuracy of 0.4 mm and 0.15 degrees in rotation.

Environmental Models as a Service: Enabling Interoperability ...

Science.gov (United States)

Achieving interoperability in environmental modeling has evolved as software technology has progressed. The recent rise of cloud computing and proliferation of web services initiated a new stage for creating interoperable systems. Scientific programmers increasingly take advantage of streamlined deployment processes and affordable cloud access to move algorithms and data to the web for discoverability and consumption. In these deployments, environmental models can become available to end users through RESTful web services and consistent application program interfaces (APIs) that consume, manipulate, and store modeling data. RESTful modeling APIs also promote discoverability and guide usability through self-documentation. Embracing the RESTful paradigm allows models to be accessible via a web standard, and the resulting endpoints are platform- and implementation-agnostic while simultaneously presenting significant computational capabilities for spatial and temporal scaling. RESTful APIs present data in a simple verb-noun web request interface: the verb dictates how a resource is consumed using HTTP methods (e.g., GET, POST, and PUT) and the noun represents the URL reference of the resource on which the verb will act. The RESTful API can self-document in both the HTTP response and an interactive web page using the Open API standard. This lets models function as an interoperable service that promotes sharing, documentation, and discoverability. Here, we discuss the

Semantic Interoperability in Heterogeneous IoT Infrastructure for Healthcare

Directory of Open Access Journals (Sweden)

Sohail Jabbar

2017-01-01

Full Text Available Interoperability remains a significant burden to the developers of Internet of Things’ Systems. This is due to the fact that the IoT devices are highly heterogeneous in terms of underlying communication protocols, data formats, and technologies. Secondly due to lack of worldwide acceptable standards, interoperability tools remain limited. In this paper, we proposed an IoT based Semantic Interoperability Model (IoT-SIM to provide Semantic Interoperability among heterogeneous IoT devices in healthcare domain. Physicians communicate their patients with heterogeneous IoT devices to monitor their current health status. Information between physician and patient is semantically annotated and communicated in a meaningful way. A lightweight model for semantic annotation of data using heterogeneous devices in IoT is proposed to provide annotations for data. Resource Description Framework (RDF is a semantic web framework that is used to relate things using triples to make it semantically meaningful. RDF annotated patients’ data has made it semantically interoperable. SPARQL query is used to extract records from RDF graph. For simulation of system, we used Tableau, Gruff-6.2.0, and Mysql tools.

Interoperable Archetypes With a Three Folded Terminology Governance.

Science.gov (United States)

Pederson, Rune; Ellingsen, Gunnar

2015-01-01

The use of openEHR archetypes increases the interoperability of clinical terminology, and in doing so improves upon the availability of clinical terminology for both primary and secondary purposes. Where clinical terminology is employed in the EPR system, research reports conflicting a results for the use of structuring and standardization as measurements of success. In order to elucidate this concept, this paper focuses on the effort to establish a national repository for openEHR based archetypes in Norway where clinical terminology could be included with benefit for interoperability three folded.

Interoperable eHealth Platform for Personalized Smart Services

DEFF Research Database (Denmark)

Mihaylov, Mihail Rumenov; Mihovska, Albena Dimitrova; Kyriazakos, Sofoklis

2015-01-01

personalized context-aware applications to serve the user's needs. This paper proposes the use of advised sensing, context-aware and cloud-based lifestyle reasoning to design an innovative eHealth platform that supports highly personalized smart services to primary users. The architecture of the platform has...... been designed in accordance with the interoperability requirements and standards as proposed by ITU-T and Continua Alliance. In particular, we define the interface dependencies and functional requirements needed, to allow eCare and eHealth vendors to manufacture interoperable sensors, ambient and home...

Enabling interoperability-as-a-service for connected IoT infrastructures and Smart Objects

DEFF Research Database (Denmark)

Hovstø, Asbjørn; Guan, Yajuan; Quintero, Juan Carlos Vasquez

2018-01-01

Lack of interoperability is considered as the most important barrier to achieve the global integration of Internet-of-Things (IoT) ecosystems across borders of different disciplines, vendors and standards. Indeed, the current IoT landscape consists of a large set of non-interoperable infrastructu...

Plugfest 2009: Global Interoperability in Telerobotics and Telemedicine.

Science.gov (United States)

King, H Hawkeye; Hannaford, Blake; Kwok, Ka-Wai; Yang, Guang-Zhong; Griffiths, Paul; Okamura, Allison; Farkhatdinov, Ildar; Ryu, Jee-Hwan; Sankaranarayanan, Ganesh; Arikatla, Venkata; Tadano, Kotaro; Kawashima, Kenji; Peer, Angelika; Schauß, Thomas; Buss, Martin; Miller, Levi; Glozman, Daniel; Rosen, Jacob; Low, Thomas

2010-05-07

Despite the great diversity of teleoperator designs and applications, their underlying control systems have many similarities. These similarities can be exploited to enable inter-operability between heterogeneous systems. We have developed a network data specification, the Interoperable Telerobotics Protocol, that can be used for Internet based control of a wide range of teleoperators. In this work we test interoperable telerobotics on the global Internet, focusing on the telesurgery application domain. Fourteen globally dispersed telerobotic master and slave systems were connected in thirty trials in one twenty four hour period. Users performed common manipulation tasks to demonstrate effective master-slave operation. With twenty eight (93%) successful, unique connections the results show a high potential for standardizing telerobotic operation. Furthermore, new paradigms for telesurgical operation and training are presented, including a networked surgery trainer and upper-limb exoskeleton control of micro-manipulators.

Do semantic standards lack quality? A survey among 34 semantic standards

NARCIS (Netherlands)

Folmer, E.J.A.; Oude Luttighuis, P.H.W.M.; Hillegersberg, J. van

2011-01-01

The adoption of standards to improve interoperability in the automotive, aerospace, shipbuilding and other sectors could save billions. While interoperability standards have been created for a number of industries, problems persist, suggesting a lack of quality of the standards themselves. The issue

Do semantic standards lack quality? A survey among 34 semantic standards.

NARCIS (Netherlands)

Folmer, Erwin Johan Albert; Oude Luttighuis, Paul; van Hillegersberg, Jos

2011-01-01

The adoption of standards to improve interoperability in the automotive, aerospace, shipbuilding and other sectors could save billions. While interoperability standards have been created for a number of industries, problems persist, suggesting a lack of quality of the standards themselves. The issue

Design and Implement AN Interoperable Internet of Things Application Based on AN Extended Ogc Sensorthings Api Standard

Science.gov (United States)

Huang, C. Y.; Wu, C. H.

2016-06-01

The Internet of Things (IoT) is an infrastructure that interconnects uniquely-identifiable devices using the Internet. By interconnecting everyday appliances, various monitoring and physical mashup applications can be constructed to improve people's daily life. However, IoT devices created by different manufacturers follow different proprietary protocols and cannot communicate with each other. This heterogeneity issue causes different products to be locked in multiple closed ecosystems that we call IoT silos. In order to address this issue, a common industrial solution is the hub approach, which implements connectors to communicate with IoT devices following different protocols. However, with the growing number of proprietary protocols proposed by device manufacturers, IoT hubs need to support and maintain a lot of customized connectors. Hence, we believe the ultimate solution to address the heterogeneity issue is to follow open and interoperable standard. Among the existing IoT standards, the Open Geospatial Consortium (OGC) SensorThings API standard supports comprehensive conceptual model and query functionalities. The first version of SensorThings API mainly focuses on connecting to IoT devices and sharing sensor observations online, which is the sensing capability. Besides the sensing capability, IoT devices could also be controlled via the Internet, which is the tasking capability. While the tasking capability was not included in the first version of the SensorThings API standard, this research aims on defining the tasking capability profile and integrates with the SensorThings API standard, which we call the extended-SensorThings API in this paper. In general, this research proposes a lightweight JSON-based web service description, the "Tasking Capability Description", allowing device owners and manufacturers to describe different IoT device protocols. Through the extended- SensorThings API, users and applications can follow a coherent protocol to control Io

Equipping the Enterprise Interoperability Problem Solver

NARCIS (Netherlands)

Oude Luttighuis, Paul; Folmer, Erwin Johan Albert; Charalabidis, Yannis

2010-01-01

The maturity of the enterprise interoperability field does not match the importance attached to it by many, both in the public as well as the private community. A host of models, paradigms, designs, standards, methods, and instruments seems to be available, but many of them are only used in rather

Developing a grid infrastructure in Cuba

Energy Technology Data Exchange (ETDEWEB)

Lopez Aldama, D.; Dominguez, M.; Ricardo, H.; Gonzalez, A.; Nolasco, E.; Fernandez, E.; Fernandez, M.; Sanchez, M.; Suarez, F.; Nodarse, F.; Moreno, N.; Aguilera, L.

2007-07-01

A grid infrastructure was deployed at Centro de Gestion de la Informacion y Desarrollo de la Energia (CUBAENERGIA) in the frame of EELA project and of a national initiative for developing a Cuban Network for Science. A stand-alone model was adopted to overcome connectivity limitations. The e-infrastructure is based on gLite-3.0 middleware and is fully compatible with EELA-infrastructure. Afterwards, the work was focused on grid applications. The application GATE was deployed from the early beginning for biomedical users. Further, two applications were deployed on the local grid infrastructure: MOODLE for e-learning and AERMOD for assessment of local dispersion of atmospheric pollutants. Additionally, our local grid infrastructure was made interoperable with a Java based distributed system for bioinformatics calculations. This experience could be considered as a suitable approach for national networks with weak Internet connections. (Author)

Balancing of Heterogeneity and Interoperability in E-Business Networks: The Role of Standards and Protocols

OpenAIRE

Frank-Dieter Dorloff; Ejub Kajan

2012-01-01

To reach this interoperability visibility and common understanding must be ensured on all levels of the interoperability pyramid. This includes common agreements about the visions, political and legal restrictions, clear descriptions about the collaboration scenarios, included business processes and-rules, the type and roles of the Documents, a common understandable vocabulary, etc. To do this in an effective and automatable manner, ICT based concepts, frameworks and models have to be defined...

Inter-operability

International Nuclear Information System (INIS)

Plaziat, J.F.; Moulin, P.; Van Beurden, R.; Ballet, E.

2005-01-01

Building an internal gas market implies establishing harmonized rules for cross border trading between operators. To that effect, the European association EASEE-gas is carrying out standards and procedures, commonly called 'inter-operability'. Set up in 2002, the Association brings together all segments of the gas industry: producers, transporters, distributors, traders and shippers, suppliers, consumers and service providers. This workshop presents the latest status on issues such as barriers to gas trade in Europe, rules and procedures under preparation by EASEE-gas, and the implementation schedule of these rules by operators. This article gathers 5 presentations about this topic given at the gas conference

Interoperability Guidelines for Lithuanian E-Learning Management Systems

Directory of Open Access Journals (Sweden)

Eugenijus Kurilovas

2011-08-01

presents the author’s viewpoint on the probable implementation of several well-known international approaches, standards and specifications to improve interoperability of the different components of the LVU programme.Practical implications – the proper implementation of the proposed interoperability guidelines and recommendations could considerably improve the interoperability level of Lithuanian state e-learning management systems.Originality/Value – this type of analysis has been performed and recommendations have been applied to the LVU case study for the first time in scientific literature.

Interoperability Guidelines for Lithuanian E-Learning Management Systems

Directory of Open Access Journals (Sweden)

Eugenijus Kurilovas

2013-08-01

presents the author’s viewpoint on the probable implementation of several well-known international approaches, standards and specifications to improve interoperability of the different components of the LVU programme.Practical implications – the proper implementation of the proposed interoperability guidelines and recommendations could considerably improve the interoperability level of Lithuanian state e-learning management systems.Originality/Value – this type of analysis has been performed and recommendations have been applied to the LVU case study for the first time in scientific literature.Research type: viewpoint, technical paper, case study, general review.

Interoperability Assets for Patient Summary Components: A Gap Analysis.

Science.gov (United States)

Heitmann, Kai U; Cangioli, Giorgio; Melgara, Marcello; Chronaki, Catherine

2018-01-01

The International Patient Summary (IPS) standards aim to define the specifications for a minimal and non-exhaustive Patient Summary, which is specialty-agnostic and condition-independent, but still clinically relevant. Meanwhile, health systems are developing and implementing their own variation of a patient summary while, the eHealth Digital Services Infrastructure (eHDSI) initiative is deploying patient summary services across countries in the Europe. In the spirit of co-creation, flexible governance, and continuous alignment advocated by eStandards, the Trillum-II initiative promotes adoption of the patient summary by engaging standards organizations, and interoperability practitioners in a community of practice for digital health to share best practices, tools, data, specifications, and experiences. This paper compares operational aspects of patient summaries in 14 case studies in Europe, the United States, and across the world, focusing on how patient summary components are used in practice, to promote alignment and joint understanding that will improve quality of standards and lower costs of interoperability.

An Architecture for Semantically Interoperable Electronic Health Records.

Science.gov (United States)

Toffanello, André; Gonçalves, Ricardo; Kitajima, Adriana; Puttini, Ricardo; Aguiar, Atualpa

2017-01-01

Despite the increasing adhesion of electronic health records, the challenge of semantic interoperability remains unsolved. The fact that different parties can exchange messages does not mean they can understand the underlying clinical meaning, therefore, it cannot be assumed or treated as a requirement. This work introduces an architecture designed to achieve semantic interoperability, in a way which organizations that follow different policies may still share medical information through a common infrastructure comparable to an ecosystem, whose organisms are exemplified within the Brazilian scenario. Nonetheless, the proposed approach describes a service-oriented design with modules adaptable to different contexts. We also discuss the establishment of an enterprise service bus to mediate a health infrastructure defined on top of international standards, such as openEHR and IHE. Moreover, we argue that, in order to achieve truly semantic interoperability in a wide sense, a proper profile must be published and maintained.

The Effect of Phase-to-earth Faults on the Operating Conditions of a Separated 110 kV Grid Normally Operated with Effectively Earthed Neutral, and Temporarily Supplied from a Compensated 110 kV Grid

Directory of Open Access Journals (Sweden)

Wilhelm Rojewski

2015-06-01

Full Text Available The paper discusses the interoperability of the German compensated 110 kV grid and the Polish effectively earthed 110 kV grid. It is assumed that an area of one grid, separated from its power system, will be temporarily supplied from the other grid in its normal regime. Reference is made to the risks associated with phase-to-earth faults in grids so interconnected. Particular attention is paid to the working conditions of surge arresters and voltage transformers in the Polish 110 kV grid deprived of its neutral earthing when supplied from the German grid.

The Role of Markup for Enabling Interoperability in Health Informatics

Directory of Open Access Journals (Sweden)

Steve eMckeever

2015-05-01

Full Text Available Interoperability is the faculty of making information systems work together. In this paper we will distinguish a number of different forms that interoperability can take and show how they are realised on a variety of physiological and health care use cases. The last fifteen years has seen the rise of very cheap digital storage both on and off cite. With the advent of the 'Internet of Things' people's expectations are for greater interconnectivity and seamless interoperability. The potential impact these technologies have on healthcare are dramatic: from improved diagnoses through immediate access to a patient's electronic health record, to 'in silico' modeling of organs and early stage drug trials, to predictive medicine based on top-down modeling of disease progression and treatment. We will begin by looking at the underlying technology, classify the various kinds of interoperability that exist in the field, and discuss how they are realised. We conclude with a discussion on future possibilities that big data and further standardizations will enable.

The role of markup for enabling interoperability in health informatics.

Science.gov (United States)

McKeever, Steve; Johnson, David

2015-01-01

Interoperability is the faculty of making information systems work together. In this paper we will distinguish a number of different forms that interoperability can take and show how they are realized on a variety of physiological and health care use cases. The last 15 years has seen the rise of very cheap digital storage both on and off site. With the advent of the Internet of Things people's expectations are for greater interconnectivity and seamless interoperability. The potential impact these technologies have on healthcare are dramatic: from improved diagnoses through immediate access to a patient's electronic health record, to in silico modeling of organs and early stage drug trials, to predictive medicine based on top-down modeling of disease progression and treatment. We will begin by looking at the underlying technology, classify the various kinds of interoperability that exist in the field, and discuss how they are realized. We conclude with a discussion on future possibilities that big data and further standardizations will enable.

Towards multi-layer interoperability of heterogeneous IoT platforms : the INTER-IoT approach

NARCIS (Netherlands)

Fortino, Giancarlo; Savaglio, Claudio; Palau, Carlos E.; de Puga, Jara Suarez; Ghanza, Maria; Paprzycki, Marcin; Montesinos, Miguel; Liotta, Antonio; Llop, Miguel; Gravina, R.; Palau, C.E.; Manso, M.; Liotta, A.; Fortino, G.

2018-01-01

Open interoperability delivers on the promise of enabling vendors and developers to interact and interoperate, without interfering with anyone’s ability to compete by delivering a superior product and experience. In the absence of global IoT standards, the INTER-IoT voluntary approach will support

PSG: Peer-to-Peer semantic grid framework architecture

Directory of Open Access Journals (Sweden)

Amira Soliman

2011-07-01

Full Text Available The grid vision, of sharing diverse resources in a flexible, coordinated and secure manner, strongly depends on metadata. Currently, grid metadata is generated and used in an ad-hoc fashion, much of it buried in the grid middleware code libraries and database schemas. This ad-hoc expression and use of metadata causes chronic dependency on human intervention during the operation of grid machinery. Therefore, the Semantic Grid is emerged as an extension of the grid in which rich resource metadata is exposed and handled explicitly, and shared and managed via grid protocols. The layering of an explicit semantic infrastructure over the grid infrastructure potentially leads to increase interoperability and flexibility. In this paper, we present PSG framework architecture that offers semantic-based grid services. PSG architecture allows the explicit use of semantics and defining the associated grid services. PSG architecture is originated from the integration of Peer-to-Peer (P2P computing with semantics and agents. Ontologies are used in annotating each grid component, developing users/nodes profiles and organizing framework agents. While, P2P is responsible for organizing and coordinating the grid nodes and resources.

The DBCLS BioHackathon: standardization and interoperability for bioinformatics web services and workflows. The DBCLS BioHackathon Consortium*

Directory of Open Access Journals (Sweden)

Katayama Toshiaki

2010-08-01

Full Text Available Abstract Web services have become a key technology for bioinformatics, since life science databases are globally decentralized and the exponential increase in the amount of available data demands for efficient systems without the need to transfer entire databases for every step of an analysis. However, various incompatibilities among database resources and analysis services make it difficult to connect and integrate these into interoperable workflows. To resolve this situation, we invited domain specialists from web service providers, client software developers, Open Bio* projects, the BioMoby project and researchers of emerging areas where a standard exchange data format is not well established, for an intensive collaboration entitled the BioHackathon 2008. The meeting was hosted by the Database Center for Life Science (DBCLS and Computational Biology Research Center (CBRC and was held in Tokyo from February 11th to 15th, 2008. In this report we highlight the work accomplished and the common issues arisen from this event, including the standardization of data exchange formats and services in the emerging fields of glycoinformatics, biological interaction networks, text mining, and phyloinformatics. In addition, common shared object development based on BioSQL, as well as technical challenges in large data management, asynchronous services, and security are discussed. Consequently, we improved interoperability of web services in several fields, however, further cooperation among major database centers and continued collaborative efforts between service providers and software developers are still necessary for an effective advance in bioinformatics web service technologies.

INTEROPERABLE FRAMEWORK SOLUTION TO ICU HEALTH CARE MONITORING

Directory of Open Access Journals (Sweden)

Shola Usha Rani

2015-03-01

Full Text Available An interoperable telehealth system provides an independent healthcare solution for better management of health and wellness. It allows people to manage their heart disease and diabetes etc. by sending their health parameters like blood pressure, heart rate, glucose levels, temperature, weight, respiration from remote place to health professional, and get real-time feedback on their condition. Here different medical devices are connected to the patient for monitoring. Each kind of device is manufactured by different vendors. And each device information and communication requires different installation and network design. It causes design complexities and network overheads when moving patients for diagnosis examinations. This problem will be solved by interoperability among devices. The ISO/IEEE 11073 is an international standard which produces interoperable hospital information system solution to medical devices. One such type of integrated environment that requires the integration of medical devices is ICU (Intensive Care Unit. This paper presents the issues for ICU monitoring system and framework solution for it.

Model Data Interoperability for the United States Integrated Ocean Observing System (IOOS)

Science.gov (United States)

Signell, Richard P.

2010-05-01

Model data interoperability for the United States Integrated Ocean Observing System (IOOS) was initiated with a focused one year project. The problem was that there were many regional and national providers of oceanographic model data; each had unique file conventions, distribution techniques and analysis tools that made it difficult to compare model results and observational data. To solve this problem, a distributed system was built utilizing a customized middleware layer and a common data model. This allowed each model data provider to keep their existing model and data files unchanged, yet deliver model data via web services in a common form. With standards-based applications that used these web services, end users then had a common way to access data from any of the models. These applications included: (1) a 2D mapping and animation using a web browser application, (2) an advanced 3D visualization and animation using a desktop application, and (3) a toolkit for a common scientific analysis environment. Due to the flexibility and low impact of the approach on providers, rapid progress was made. The system was implemented in all eleven US IOOS regions and at the NOAA National Coastal Data Development Center, allowing common delivery of regional and national oceanographic model forecast and archived results that cover all US waters. The system, based heavily on software technology from the NSF-sponsored Unidata Program Center, is applicable to any structured gridded data, not just oceanographic model data. There is a clear pathway to expand the system to include unstructured grid (e.g. triangular grid) data.

Comparison of Standards and Technical Requirements of Grid-Connected Wind Power Plants in China and the United States

Energy Technology Data Exchange (ETDEWEB)

Gao, David Wenzhong [Alternative Power Innovations, LLC; Muljadi, Eduard [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tian, Tian [National Renewable Energy Lab. (NREL), Golden, CO (United States); Miller, Mackay [National Renewable Energy Lab. (NREL), Golden, CO (United States); Wang, Weisheng [China Electric Power Research Inst. (China)

2016-09-01

The rapid deployment of wind power has made grid integration and operational issues focal points in industry discussions and research. Compliance with grid connection standards for wind power plants (WPPs) is crucial to ensuring the reliable and stable operation of the electric power grid. This report compares the standards for grid-connected WPPs in China to those in the United States to facilitate further improvements in wind power standards and enhance the development of wind power equipment. Detailed analyses of power quality, low-voltage ride-through capability, active power control, reactive power control, voltage control, and wind power forecasting are provided to enhance the understanding of grid codes in the two largest markets of wind power. This study compares WPP interconnection standards and technical requirements in China to those in the United States.

Physical characteristics of anti-scatter grids according to old and new JIS Standards

International Nuclear Information System (INIS)

Ishikawa, Mitsuo; Ide, Toshinori; Miyake, Hiroyuki; Kamishima, Yuki; Negishi, Toru

2004-01-01

Japan Industrial Standard (JIS) Z 4910 (anti-scatter grids) of the JIS standards was revised in 2000. Major points of revision were the provision of general-purpose and mammographic anti-scatter grids and changes in the diameter of the measuring field and difference in the manufacturing allowance. We measured the physical characteristics (grid selectivity, contrast improvement ratio, and grid exposure factor) of [general-purpose anti-scatter grids] referring to the methods of measurement [JIS Z 4910:2000] and [JIS Z 4910:1983] using an inverter-type high-voltage generator. Physical characteristics indicated a lower value for [JIS Z 4910:2000] than for [JIS Z 4910:1983]. [JIS Z 4910:2000] was able to measure primary radiation and scattered radiation more accurately than [JIS Z 4910:1983] because of the diameter of the measuring field and the measurement arrangement. Moreover, the physical characteristic values were influenced by radiation quality, e.g., differences in high-voltage generators. In the method of measuring stipulated by JIS, strict conditions regarding the arrangement of the measurement tools and the stability and other factors of the power output of the X-ray generator are provided for the type approval test conducted by the manufacturer. (author)

A priori modeling of chemical reactions on computational grid platforms: Workflows and data models

International Nuclear Information System (INIS)

Rampino, S.; Monari, A.; Rossi, E.; Evangelisti, S.; Laganà, A.

2012-01-01

Graphical abstract: The quantum framework of the Grid Empowered Molecular Simulator GEMS assembled on the European Grid allows the ab initio evaluation of the dynamics of small systems starting from the calculation of the electronic properties. Highlights: ► The grid based GEMS simulator accurately models small chemical systems. ► Q5Cost and D5Cost file formats provide interoperability in the workflow. ► Benchmark runs on H + H 2 highlight the Grid empowering. ► O + O 2 and N + N 2 calculated k (T)’s fall within the error bars of the experiment. - Abstract: The quantum framework of the Grid Empowered Molecular Simulator GEMS has been assembled on the segment of the European Grid devoted to the Computational Chemistry Virtual Organization. The related grid based workflow allows the ab initio evaluation of the dynamics of small systems starting from the calculation of the electronic properties. Interoperability between computational codes across the different stages of the workflow was made possible by the use of the common data formats Q5Cost and D5Cost. Illustrative benchmark runs have been performed on the prototype H + H 2 , N + N 2 and O + O 2 gas phase exchange reactions and thermal rate coefficients have been calculated for the last two. Results are discussed in terms of the modeling of the interaction and advantages of using the Grid is highlighted.

A state-of-the-art review of interoperability amongst heterogeneous software systems

Directory of Open Access Journals (Sweden)

Carlos Mario Zapata Jaramillo

2009-05-01

Full Text Available Information systems are sets of interacting elements aimed at supporting entrepreneurial or business activities; they cannot thus coexist in an isolated way but require their data to be shared so as to increase their productivity. Such systems’ interoperability is normally accomplished through mark-up standards, query languages and web services. The literature contains work related to software system interoperability; however, it presents some difficulties, such as the need for using the same platforms and different programming languages, the use of read only languages and the deficiencies in the formalism used for achieving it. This paper presents a critical review of the advances made regarding heterogeneous software systems’ interoperability.

RFID in libraries a step toward interoperability

CERN Document Server

Ayre, Lori Bowen

2012-01-01

The approval by The National Information Standards Organization (NISO) of a new standard for RFID in libraries is a big step toward interoperability among libraries and vendors. By following this set of practices and procedures, libraries can ensure that an RFID tag in one library can be used seamlessly by another, assuming both comply, even if they have different suppliers for tags, hardware, and software. In this issue of Library Technology Reports, Lori Bowen Ayre, an experienced implementer of automated materials handling systems, Provides background on the evolution of the standard

An Interoperability Framework and Capability Profiling for Manufacturing Software

Science.gov (United States)

Matsuda, M.; Arai, E.; Nakano, N.; Wakai, H.; Takeda, H.; Takata, M.; Sasaki, H.

ISO/TC184/SC5/WG4 is working on ISO16100: Manufacturing software capability profiling for interoperability. This paper reports on a manufacturing software interoperability framework and a capability profiling methodology which were proposed and developed through this international standardization activity. Within the context of manufacturing application, a manufacturing software unit is considered to be capable of performing a specific set of function defined by a manufacturing software system architecture. A manufacturing software interoperability framework consists of a set of elements and rules for describing the capability of software units to support the requirements of a manufacturing application. The capability profiling methodology makes use of the domain-specific attributes and methods associated with each specific software unit to describe capability profiles in terms of unit name, manufacturing functions, and other needed class properties. In this methodology, manufacturing software requirements are expressed in terns of software unit capability profiles.

Dynamic Business Networks: A Headache for Sustainable Systems Interoperability

Science.gov (United States)

Agostinho, Carlos; Jardim-Goncalves, Ricardo

Collaborative networked environments emerged with the spread of the internet, contributing to overcome past communication barriers, and identifying interoperability as an essential property. When achieved seamlessly, efficiency is increased in the entire product life cycle. Nowadays, most organizations try to attain interoperability by establishing peer-to-peer mappings with the different partners, or in optimized networks, by using international standard models as the core for information exchange. In current industrial practice, mappings are only defined once, and the morphisms that represent them, are hardcoded in the enterprise systems. This solution has been effective for static environments, where enterprise and product models are valid for decades. However, with an increasingly complex and dynamic global market, models change frequently to answer new customer requirements. This paper draws concepts from the complex systems science and proposes a framework for sustainable systems interoperability in dynamic networks, enabling different organizations to evolve at their own rate.

FY 1999 project on the development of new industry support type international standards. Standardization for high-interoperability of optical disk systems; 1999 nendo shinki sangyo shiengata kokusai hyojun kaihatsu jigyo seika hokokusho. Hikari disk system no sogo un'yosei kakuho no tame no hyojunka

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The R and D were conducted on the standardization for interoperability of optical disk system, and the FY 1999 results were summarized. In the study, for the volume/file structure specified by ISO/IEC 13346, the development of standards was made for interoperation of the UDF specified by OSTA. In this fiscal year, to avoid the problem on non-interchangeability of UDF which actually exists, enhancement of functions of a test tool for UDF interchangeability was tried. Namely, development was carried out of UDF interchangeability test tool, UAF related standards, and UAF related standards assessment system. Especially, it was formally announced that UDF security enhancement of UAF related standards will be included in UDF2.x in the OSTA conference held at the end of FY 1999. Also, a draft on the standard information was drawn up domestically. The standards including API are expected to be established as standards through activities in the next fiscal year. (NEDO)

FY 1999 project on the development of new industry support type international standards. Standardization for high-interoperability of optical disk systems; 1999 nendo shinki sangyo shiengata kokusai hyojun kaihatsu jigyo seika hokokusho. Hikari disk system no sogo un'yosei kakuho no tame no hyojunka

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The R and D were conducted on the standardization for interoperability of optical disk system, and the FY 1999 results were summarized. In the study, for the volume/file structure specified by ISO/IEC 13346, the development of standards was made for interoperation of the UDF specified by OSTA. In this fiscal year, to avoid the problem on non-interchangeability of UDF which actually exists, enhancement of functions of a test tool for UDF interchangeability was tried. Namely, development was carried out of UDF interchangeability test tool, UAF related standards, and UAF related standards assessment system. Especially, it was formally announced that UDF security enhancement of UAF related standards will be included in UDF2.x in the OSTA conference held at the end of FY 1999. Also, a draft on the standard information was drawn up domestically. The standards including API are expected to be established as standards through activities in the next fiscal year. (NEDO)

[Lessons learned in the implementation of interoperable National Health Information Systems: a systematic review].

Science.gov (United States)

Ovies-Bernal, Diana Paola; Agudelo-Londoño, Sandra M

2014-01-01

Identify shared criteria used throughout the world in the implementation of interoperable National Health Information Systems (NHIS) and provide validated scientific information on the dimensions affecting interoperability. This systematic review sought to identify primary articles on the implementation of interoperable NHIS published in scientific journals in English, Portuguese, or Spanish between 1990 and 2011 through a search of eight databases of electronic journals in the health sciences and informatics: MEDLINE (PubMed), Proquest, Ovid, EBSCO, MD Consult, Virtual Health Library, Metapress, and SciELO. The full texts of the articles were reviewed, and those that focused on technical computer aspects or on normative issues were excluded, as well as those that did not meet the quality criteria for systematic reviews of interventions. Of 291 studies found and reviewed, only five met the inclusion criteria. These articles reported on the process of implementing an interoperable NHIS in Brazil, China, the United States, Turkey, and the Semiautonomous Region of Zanzíbar, respectively. Five common basic criteria affecting implementation of the NHIS were identified: standards in place to govern the process, availability of trained human talent, financial and structural constraints, definition of standards, and assurance that the information is secure. Four dimensions affecting interoperability were defined: technical, semantic, legal, and organizational. The criteria identified have to be adapted to the actual situation in each country and a proactive approach should be used to ensure that implementation of the interoperable NHIS is strategic, simple, and reliable.

MaGate Simulator: A Simulation Environment for a Decentralized Grid Scheduler

Science.gov (United States)

Huang, Ye; Brocco, Amos; Courant, Michele; Hirsbrunner, Beat; Kuonen, Pierre

This paper presents a simulator for of a decentralized modular grid scheduler named MaGate. MaGate’s design emphasizes scheduler interoperability by providing intelligent scheduling serving the grid community as a whole. Each MaGate scheduler instance is able to deal with dynamic scheduling conditions, with continuously arriving grid jobs. Received jobs are either allocated on local resources, or delegated to other MaGates for remote execution. The proposed MaGate simulator is based on GridSim toolkit and Alea simulator, and abstracts the features and behaviors of complex fundamental grid elements, such as grid jobs, grid resources, and grid users. Simulation of scheduling tasks is supported by a grid network overlay simulator executing distributed ant-based swarm intelligence algorithms to provide services such as group communication and resource discovery. For evaluation, a comparison of behaviors of different collaborative policies among a community of MaGates is provided. Results support the use of the proposed approach as a functional ready grid scheduler simulator.

CERN to offer secure grid, published in itWorldCanada

CERN Multimedia

Broersma, Matthew

2006-01-01

CERN, the Geneva-based nuclear physics research center, has launched a collaborative effort with some of the biggest name in IT to tighten up security on its landmark Large Hadron Collider (LHC) project, as well as working on platform virtualization and the interoperability of grid software (1 page)

Improved semantic interoperability for content reuse through knowledge organization systems

Directory of Open Access Journals (Sweden)

José Antonio Moreiro González

2012-04-01

Full Text Available The Knowledge Organization Systems (KOS are resources designed to improve the knowledge interoperability, management and retrieval. As increases the web resources, it’s evidenced the lack of KOS, with the consequent impact in the resources interoperability. The KOSS are, by definition, complicated and costly tools, so much in his creation as in his management. The reuse of similar organizational structures is a necessary element in this context. They analyses experiences of reuse of The KOS and signals like the new standards are impinged on this appearance.

The interoperability force in the ERP field

Science.gov (United States)

Boza, Andrés; Cuenca, Llanos; Poler, Raúl; Michaelides, Zenon

2015-04-01

Enterprise resource planning (ERP) systems participate in interoperability projects and this participation sometimes leads to new proposals for the ERP field. The aim of this paper is to identify the role that interoperability plays in the evolution of ERP systems. To go about this, ERP systems have been first identified within interoperability frameworks. Second, the initiatives in the ERP field driven by interoperability requirements have been identified from two perspectives: technological and business. The ERP field is evolving from classical ERP as information system integrators to a new generation of fully interoperable ERP. Interoperability is changing the way of running business, and ERP systems are changing to adapt to the current stream of interoperability.

Towards an Interoperable Field Spectroscopy Metadata Standard with Extended Support for Marine Specific Applications

Directory of Open Access Journals (Sweden)

Barbara A. Rasaiah

2015-11-01

Full Text Available This paper presents an approach to developing robust metadata standards for specific applications that serves to ensure a high level of reliability and interoperability for a spectroscopy dataset. The challenges of designing a metadata standard that meets the unique requirements of specific user communities are examined, including in situ measurement of reflectance underwater, using coral as a case in point. Metadata schema mappings from seven existing metadata standards demonstrate that they consistently fail to meet the needs of field spectroscopy scientists for general and specific applications (μ = 22%, σ = 32% conformance with the core metadata requirements and μ = 19%, σ = 18% for the special case of a benthic (e.g., coral reflectance metadataset. Issues such as field measurement methods, instrument calibration, and data representativeness for marine field spectroscopy campaigns are investigated within the context of submerged benthic measurements. The implication of semantics and syntax for a robust and flexible metadata standard are also considered. A hybrid standard that serves as a “best of breed” incorporating useful modules and parameters within the standards is proposed. This paper is Part 3 in a series of papers in this journal, examining the issues central to a metadata standard for field spectroscopy datasets. The results presented in this paper are an important step towards field spectroscopy metadata standards that address the specific needs of field spectroscopy data stakeholders while facilitating dataset documentation, quality assurance, discoverability and data exchange within large-scale information sharing platforms.

Standardized UXO Technology Demonstration Site Blind Grid Scoring Record No. 906 (Sky Research, Inc.)

National Research Council Canada - National Science Library

McClung, J. S; Burch, William; Fling, Rick; McClung, Christina; Lombardo, Leonardo; McDonnell, Patrick

2008-01-01

...) utilizing the APG Standardized UXO Technology Demonstration Site Blind Grid. This Scoring Record was coordinated by William Burch and the Standardized UXO Technology Demonstration Site Scoring Committee...

Designing a Distributed Space Systems Simulation in Accordance with the Simulation Interoperability Standards Organization (SISO)

Science.gov (United States)

Cowen, Benjamin

2011-01-01

Simulations are essential for engineering design. These virtual realities provide characteristic data to scientists and engineers in order to understand the details and complications of the desired mission. A standard development simulation package known as Trick is used in developing a source code to model a component (federate in HLA terms). The runtime executive is integrated into an HLA based distributed simulation. TrickHLA is used to extend a Trick simulation for a federation execution, develop a source code for communication between federates, as well as foster data input and output. The project incorporates international cooperation along with team collaboration. Interactions among federates occur throughout the simulation, thereby relying on simulation interoperability. Communication through the semester went on between participants to figure out how to create this data exchange. The NASA intern team is designing a Lunar Rover federate and a Lunar Shuttle federate. The Lunar Rover federate supports transportation across the lunar surface and is essential for fostering interactions with other federates on the lunar surface (Lunar Shuttle, Lunar Base Supply Depot and Mobile ISRU Plant) as well as transporting materials to the desired locations. The Lunar Shuttle federate transports materials to and from lunar orbit. Materials that it takes to the supply depot include fuel and cargo necessary to continue moon-base operations. This project analyzes modeling and simulation technologies as well as simulation interoperability. Each team from participating universities will work on and engineer their own federate(s) to participate in the SISO Spring 2011 Workshop SIW Smackdown in Boston, Massachusetts. This paper will focus on the Lunar Rover federate.

Implementing Interoperability in the Seafood Industry: Learning from Experiences in Other Sectors.

Science.gov (United States)

Bhatt, Tejas; Gooch, Martin; Dent, Benjamin; Sylvia, Gilbert

2017-08-01

Interoperability of communication and information technologies within and between businesses operating along supply chains is being pursued and implemented in numerous industries worldwide to increase the efficiency and effectiveness of operations. The desire for greater interoperability is also driven by the need to reduce business risk through more informed management decisions. Interoperability is achieved by the development of a technology architecture that guides the design and implementation of communication systems existing within individual businesses and between businesses comprising the supply chain. Technology architectures are developed through a purposeful dialogue about why the architecture is required, the benefits and opportunities that the architecture offers the industry, and how the architecture will translate into practical results. An assessment of how the finance, travel, and health industries and a sector of the food industry-fresh produce-have implemented interoperability was conducted to identify lessons learned that can aid the development of interoperability in the seafood industry. The findings include identification of the need for strong, effective governance during the establishment and operation of an interoperability initiative to ensure the existence of common protocols and standards. The resulting insights were distilled into a series of principles for enabling syntactic and semantic interoperability in any industry, which we summarize in this article. Categorized as "structural," "operational," and "integrative," the principles describe requirements and solutions that are pivotal to enabling businesses to create and capture value from full chain interoperability. The principles are also fundamental to allowing governments and advocacy groups to use traceability for public good. © 2017 Institute of Food Technologists®.

Interoperability in planetary research for geospatial data analysis

Science.gov (United States)

Hare, Trent M.; Rossi, Angelo P.; Frigeri, Alessandro; Marmo, Chiara

2018-01-01

For more than a decade there has been a push in the planetary science community to support interoperable methods for accessing and working with geospatial data. Common geospatial data products for planetary research include image mosaics, digital elevation or terrain models, geologic maps, geographic location databases (e.g., craters, volcanoes) or any data that can be tied to the surface of a planetary body (including moons, comets or asteroids). Several U.S. and international cartographic research institutions have converged on mapping standards that embrace standardized geospatial image formats, geologic mapping conventions, U.S. Federal Geographic Data Committee (FGDC) cartographic and metadata standards, and notably on-line mapping services as defined by the Open Geospatial Consortium (OGC). The latter includes defined standards such as the OGC Web Mapping Services (simple image maps), Web Map Tile Services (cached image tiles), Web Feature Services (feature streaming), Web Coverage Services (rich scientific data streaming), and Catalog Services for the Web (data searching and discoverability). While these standards were developed for application to Earth-based data, they can be just as valuable for planetary domain. Another initiative, called VESPA (Virtual European Solar and Planetary Access), will marry several of the above geoscience standards and astronomy-based standards as defined by International Virtual Observatory Alliance (IVOA). This work outlines the current state of interoperability initiatives in use or in the process of being researched within the planetary geospatial community.

A development framework for semantically interoperable health information systems.

Science.gov (United States)

Lopez, Diego M; Blobel, Bernd G M E

2009-02-01

Semantic interoperability is a basic challenge to be met for new generations of distributed, communicating and co-operating health information systems (HIS) enabling shared care and e-Health. Analysis, design, implementation and maintenance of such systems and intrinsic architectures have to follow a unified development methodology. The Generic Component Model (GCM) is used as a framework for modeling any system to evaluate and harmonize state of the art architecture development approaches and standards for health information systems as well as to derive a coherent architecture development framework for sustainable, semantically interoperable HIS and their components. The proposed methodology is based on the Rational Unified Process (RUP), taking advantage of its flexibility to be configured for integrating other architectural approaches such as Service-Oriented Architecture (SOA), Model-Driven Architecture (MDA), ISO 10746, and HL7 Development Framework (HDF). Existing architectural approaches have been analyzed, compared and finally harmonized towards an architecture development framework for advanced health information systems. Starting with the requirements for semantic interoperability derived from paradigm changes for health information systems, and supported in formal software process engineering methods, an appropriate development framework for semantically interoperable HIS has been provided. The usability of the framework has been exemplified in a public health scenario.

Interoperability in the e-Government Context

Science.gov (United States)

2012-01-01

TN-014 | 3 ing e- government systems focus primarily on these technical challenges [UNDP 2007a, p. 10; CS Transform 2009, p. 3]. More recently...Thailand’s government hits its own wall. Responding agencies and non- governmental groups are unable to share information vital to the rescue effort...Interoperability and Open Standards for e- Governance .” egov (Sep. 1, 2007): 17–19. [Secretary General, United Nations 2010] Secretary General, United

Irvine Smart Grid Demonstration, a Regional Smart Grid Demonstration Project

Energy Technology Data Exchange (ETDEWEB)

Yinger, Robert [Southern California Edison Company, Rosemead, CA (United States); Irwin, Mark [Southern California Edison Company, Rosemead, CA (United States)

2015-12-29

ISGD was a comprehensive demonstration that spanned the electricity delivery system and extended into customer homes. The project used phasor measurement technology to enable substation-level situational awareness, and demonstrated SCE’s next-generation substation automation system. It extended beyond the substation to evaluate the latest generation of distribution automation technologies, including looped 12-kV distribution circuit topology using URCIs. The project team used DVVC capabilities to demonstrate CVR. In customer homes, the project evaluated HAN devices such as smart appliances, programmable communicating thermostats, and home energy management components. The homes were also equipped with energy storage, solar PV systems, and a number of energy efficiency measures (EEMs). The team used one block of homes to evaluate strategies and technologies for achieving ZNE. A home achieves ZNE when it produces at least as much renewable energy as the amount of energy it consumes annually. The project also assessed the impact of device-specific demand response (DR), as well as load management capabilities involving energy storage devices and plug-in electric vehicle charging equipment. In addition, the ISGD project sought to better understand the impact of ZNE homes on the electric grid. ISGD’s SENet enabled end-to-end interoperability between multiple vendors’ systems and devices, while also providing a level of cybersecurity that is essential to smart grid development and adoption across the nation. The ISGD project includes a series of sub-projects grouped into four logical technology domains: Smart Energy Customer Solutions, Next-Generation Distribution System, Interoperability and Cybersecurity, and Workforce of the Future. Section 2.3 provides a more detailed overview of these domains.

XACML profile and implementation for authorization interoperability between OSG and EGEE

International Nuclear Information System (INIS)

Garzoglio, G; Altunay, M; Chadwick, K; Hesselroth, T D; Levshina, T; Sfiligoi, I; Alderman, I; Miller, Z; Ananthakrishnan, R; Bester, J; Ciaschini, V; Ferraro, A; Forti, A; Demchenko, Y; Groep, D; Koeroo, O; Hover, J; Packard, J; Joie, C La; Sagehaug, H

2010-01-01

The Open Science Grid (OSG) and the Enabling Grids for E-sciencE (EGEE) have a common security model, based on Public Key Infrastructure. Grid resources grant access to users because of their membership in a Virtual Organization (VO), rather than on personal identity. Users push VO membership information to resources in the form of identity attributes, thus declaring that resources will be consumed on behalf of a specific group inside the organizational structure of the VO. Resources contact an access policies repository, centralized at each site, to grant the appropriate privileges for that VO group. Before the work in this paper, despite the commonality of the model, OSG and EGEE used different protocols for the communication between resources and the policy repositories. Hence, middleware developed for one Grid could not naturally be deployed on the other Grid, since the authorization module of the middleware would have to be enhanced to support the other Grid's communication protocol. In addition, maintenance and support for different authorization call-out protocols represents a duplication of effort for our relatively small community. To address these issues, OSG and EGEE initiated a joint project on authorization interoperability. The project defined a common communication protocol and attribute identity profile for authorization call-out and provided implementation and integration with major Grid middleware. The activity had resonance with middleware development communities, such as the Globus Toolkit and Condor, who decided to join the collaboration and contribute requirements and software. In this paper, we discuss the main elements of the profile, its implementation, and deployment in EGEE and OSG. We focus in particular on the operations of the authorization infrastructures of both Grids.

XACML profile and implementation for authorization interoperability between OSG and EGEE

Energy Technology Data Exchange (ETDEWEB)

Garzoglio, G.; Alderman, I.; Altunay, M.; Ananthakrishnan, R.; Bester, J.; Chadwick, K.; Ciaschini, V.; Demchenko, Y.; Ferraro, A.; Forti, A.; Groep, D.; /Fermilab /Wisconsin U., Madison /Argonne /INFN, CNAF /Amsterdam U. /NIKHEF, Amsterdam /Brookhaven /SWITCH, Zurich /Bergen Coll. Higher Educ.

2009-05-01

The Open Science Grid (OSG) and the Enabling Grids for E-sciencE (EGEE) have a common security model, based on Public Key Infrastructure. Grid resources grant access to users because of their membership in a Virtual Organization (VO), rather than on personal identity. Users push VO membership information to resources in the form of identity attributes, thus declaring that resources will be consumed on behalf of a specific group inside the organizational structure of the VO. Resources contact an access policies repository, centralized at each site, to grant the appropriate privileges for that VO group. Before the work in this paper, despite the commonality of the model, OSG and EGEE used different protocols for the communication between resources and the policy repositories. Hence, middleware developed for one Grid could not naturally be deployed on the other Grid, since the authorization module of the middleware would have to be enhanced to support the other Grid's communication protocol. In addition, maintenance and support for different authorization call-out protocols represents a duplication of effort for our relatively small community. To address these issues, OSG and EGEE initiated a joint project on authorization interoperability. The project defined a common communication protocol and attribute identity profile for authorization call-out and provided implementation and integration with major Grid middleware. The activity had resonance with middleware development communities, such as the Globus Toolkit and Condor, who decided to join the collaboration and contribute requirements and software. In this paper, we discuss the main elements of the profile, its implementation, and deployment in EGEE and OSG. We focus in particular on the operations of the authorization infrastructures of both Grids.

When energy grids become intelligent: smart grid standardisation in the starting-blocks; interconnection in Europe: 50 billions Euros to boost all networks; smart electric grids feed new projects; The United States and Europe connect standards on smart electric grids; smart metering: standards place their marker

International Nuclear Information System (INIS)

Nedey, Fabienne; Tourneur, Jean-Claude; Barthet, Marie-Claire

2012-01-01

As talking about smart grids has became a leitmotiv, their development appears to be complex as it requires all the actors (carriers, dealers, providers, decentralised producers, consumers, equipment manufacturers, and so on) to share a same transverse vision. A European cooperation group has been set up which gathers representatives of the European electrical and telecommunication industry. Beside, the European Commission has presented a plan which comprises 50 billions Euros of investments to improve all networks in the fields of transports, energy and digital technology. In France, six projects on smart grids gathered 115 millions Euros. At the international level, the NIST and SGCG have been asked to cooperatively elaborate a standard framework for smart grids. But smart metering concerns other fields than electricity...

Analysis of interoperability requirements and of relevant activities in standards bodies and fora

DEFF Research Database (Denmark)

Guarneri, R.; Skouby, Knud Erik; Falch, Morten

1999-01-01

The aim of this deliverable is to provide the summary of the standardisation activities considered of most relevance for the work of the PRIME project with respect to interoperability; this information is of prime importance for the planning of further PRIME technical work in this area....

Towards an enterprise interoperability framework

CSIR Research Space (South Africa)

Kotzé, P

2010-06-01

Full Text Available This paper presents relevant interoperability approaches and solutions applied to global/international networked (collaborative) enterprises or organisations and conceptualise an enhanced enterprise interoperability framework. The paper covers...

A Theory of Interoperability Failures

National Research Council Canada - National Science Library

McBeth, Michael S

2003-01-01

This paper develops a theory of interoperability failures. Interoperability in this paper refers to the exchange of information and the use of information, once exchanged, between two or more systems...

Extending the GI Brokering Suite to Support New Interoperability Specifications

Science.gov (United States)

Boldrini, E.; Papeschi, F.; Santoro, M.; Nativi, S.

2014-12-01

The GI brokering suite provides the discovery, access, and semantic Brokers (i.e. GI-cat, GI-axe, GI-sem) that empower a Brokering framework for multi-disciplinary and multi-organizational interoperability. GI suite has been successfully deployed in the framework of several programmes and initiatives, such as European Union funded projects, NSF BCube, and the intergovernmental coordinated effort Global Earth Observation System of Systems (GEOSS). Each GI suite Broker facilitates interoperability for a particular functionality (i.e. discovery, access, semantic extension) among a set of brokered resources published by autonomous providers (e.g. data repositories, web services, semantic assets) and a set of heterogeneous consumers (e.g. client applications, portals, apps). A wide set of data models, encoding formats, and service protocols are already supported by the GI suite, such as the ones defined by international standardizing organizations like OGC and ISO (e.g. WxS, CSW, SWE, GML, netCDF) and by Community specifications (e.g. THREDDS, OpenSearch, OPeNDAP, ESRI APIs). Using GI suite, resources published by a particular Community or organization through their specific technology (e.g. OPeNDAP/netCDF) can be transparently discovered, accessed, and used by different Communities utilizing their preferred tools (e.g. a GIS visualizing WMS layers). Since Information Technology is a moving target, new standards and technologies continuously emerge and are adopted in the Earth Science context too. Therefore, GI Brokering suite was conceived to be flexible and accommodate new interoperability protocols and data models. For example, GI suite has recently added support to well-used specifications, introduced to implement Linked data, Semantic Web and precise community needs. Amongst the others, they included: DCAT: a RDF vocabulary designed to facilitate interoperability between Web data catalogs. CKAN: a data management system for data distribution, particularly used by

GridRun: A lightweight packaging and execution environment forcompact, multi-architecture binaries

Energy Technology Data Exchange (ETDEWEB)

Shalf, John; Goodale, Tom

2004-02-01

GridRun offers a very simple set of tools for creating and executing multi-platform binary executables. These ''fat-binaries'' archive native machine code into compact packages that are typically a fraction the size of the original binary images they store, enabling efficient staging of executables for heterogeneous parallel jobs. GridRun interoperates with existing distributed job launchers/managers like Condor and the Globus GRAM to greatly simplify the logic required launching native binary applications in distributed heterogeneous environments.

An E-government Interoperability Platform Supporting Personal Data Protection Regulations

Directory of Open Access Journals (Sweden)

Laura González

2016-08-01

Full Text Available Public agencies are increasingly required to collaborate with each other in order to provide high-quality e-government services. This collaboration is usually based on the service-oriented approach and supported by interoperability platforms. Such platforms are specialized middleware-based infrastructures enabling the provision, discovery and invocation of interoperable software services. In turn, given that personal data handled by governments are often very sensitive, most governments have developed some sort of legislation focusing on data protection. This paper proposes solutions for monitoring and enforcing data protection laws within an E-government Interoperability Platform. In particular, the proposal addresses requirements posed by the Uruguayan Data Protection Law and the Uruguayan E-government Platform, although it can also be applied in similar scenarios. The solutions are based on well-known integration mechanisms (e.g. Enterprise Service Bus as well as recognized security standards (e.g. eXtensible Access Control Markup Language and were completely prototyped leveraging the SwitchYard ESB product.

EASE-Grid 2.0: Incremental but Significant Improvements for Earth-Gridded Data Sets

Directory of Open Access Journals (Sweden)

Matthew H. Savoie

2012-03-01

Full Text Available Defined in the early 1990s for use with gridded satellite passive microwave data, the Equal-Area Scalable Earth Grid (EASE-Grid was quickly adopted and used for distribution of a variety of satellite and in situ data sets. Conceptually easy to understand, EASE-Grid suffers from limitations that make it impossible to format in the widely popular GeoTIFF convention without reprojection. Importing EASE-Grid data into standard mapping software packages is nontrivial and error-prone. This article defines a standard for an improved EASE-Grid 2.0 definition, addressing how the changes rectify issues with the original grid definition. Data distributed using the EASE-Grid 2.0 standard will be easier for users to import into standard software packages and will minimize common reprojection errors that users had encountered with the original EASE-Grid definition.

GridCom, Grid Commander: graphical interface for Grid jobs and data management

International Nuclear Information System (INIS)

Galaktionov, V.V.

2011-01-01

GridCom - the software package for maintenance of automation of access to means of distributed system Grid (jobs and data). The client part, executed in the form of Java-applets, realises the Web-interface access to Grid through standard browsers. The executive part Lexor (LCG Executor) is started by the user in UI (User Interface) machine providing performance of Grid operations

Consistent data models and security standards for power system control through their standard compliant integration via ontologies; Einheitliche Datenmodelle und Sicherheitsstandards in der Netzleittechnik durch ihre standardkonforme Integration mittels Ontologien

Energy Technology Data Exchange (ETDEWEB)

Uslar, Mathias; Beenken, Petra; Beer, Sebastian [OFFIS, Oldenburg (Germany)

2009-07-01

The ongoing integration of distributed energy recourses into the existing power grid has lead to both grown communication costs and an increased need for interoperability between the involved actors. In this context, standardized and ontology- based data models help to reduce integration costs in heterogeneous system landscapes. Using ontology-based security profiles, such models can be extended with meta-data containing information about security measures for energyrelated data in need of protection. By this approach, we achieve both a unified data model and a unified security level. (orig.)

Interoperability of remote handling control system software modules at Divertor Test Platform 2 using middleware

International Nuclear Information System (INIS)

Tuominen, Janne; Rasi, Teemu; Mattila, Jouni; Siuko, Mikko; Esque, Salvador; Hamilton, David

2013-01-01

Highlights: ► The prototype DTP2 remote handling control system is a heterogeneous collection of subsystems, each realizing a functional area of responsibility. ► Middleware provides well-known, reusable solutions to problems, such as heterogeneity, interoperability, security and dependability. ► A middleware solution was selected and integrated with the DTP2 RH control system. The middleware was successfully used to integrate all relevant subsystems and functionality was demonstrated. -- Abstract: This paper focuses on the inter-subsystem communication channels in a prototype distributed remote handling control system at Divertor Test Platform 2 (DTP2). The subsystems are responsible for specific tasks and, over the years, their development has been carried out using various platforms and programming languages. The communication channels between subsystems have different priorities, e.g. very high messaging rate and deterministic timing or high reliability in terms of individual messages. Generally, a control system's communication infrastructure should provide interoperability, scalability, performance and maintainability. An attractive approach to accomplish this is to use a standardized and proven middleware implementation. The selection of a middleware can have a major cost impact in future integration efforts. In this paper we present development done at DTP2 using the Object Management Group's (OMG) standard specification for Data Distribution Service (DDS) for ensuring communications interoperability. DDS has gained a stable foothold especially in the military field. It lacks a centralized broker, thereby avoiding a single-point-of-failure. It also includes an extensive set of Quality of Service (QoS) policies. The standard defines a platform- and programming language independent model and an interoperability wire protocol that enables DDS vendor interoperability, allowing software developers to avoid vendor lock-in situations

Universal standard for the smart energy home

International Nuclear Information System (INIS)

Hatler, M.

2009-01-01

Smart metering systems are now being installed in countries throughout the world. This article discussed technologies designed to connect in-home electrical devices such as thermostats, energy displays, and computers to the electricity grid. The smart-grid connected devices will form part of the home area network (HAN) designed to provide consumers with real time control of their energy use. Many governments are now mandating the use of HAN interfaces, and members of the energy industry are developing global standards for HANs. Within 5 years, it is estimated that over 126 million smart meters will be installed in households worldwide. Using HANs, consumers will be able to shift their usage away from peak energy usage times that are more expensive. Studies have demonstrated that the use of dynamic pricing options can result in a 50 per cent load reduction during critical peak periods. A universal standard and certification process is currently underway to prevent HAN market fragmentation and to ensure plug-and-play interoperability among HAN devices. It was concluded that the smart energy home will present large market opportunities for software developers, investors, and manufacturers. 1 fig

Support interoperability and reusability of emerging forms of assessment: Some issues on integrating IMS LD with IMS QTI

NARCIS (Netherlands)

Miao, Yongwu; Boon, Jo; Van der Klink, Marcel; Sloep, Peter; Koper, Rob

2009-01-01

Miao, Y., Boon, J., Van der Klink, M., Sloep, P. B., & Koper, R. (2011). Support interoperability and reusability of emerging forms of assessment: Some issues on integrating IMS LD with IMS QTI. In F. Lazarinis, S. Green, & E. Pearson (Eds.), E-Learning Standards and Interoperability: Frameworks

Secure and interoperable communication infrastructures for PPDR organisations

Science.gov (United States)

Müller, Wilmuth; Marques, Hugo; Pereira, Luis; Rodriguez, Jonathan; Brouwer, Frank; Bouwers, Bert; Politis, Ilias; Lykourgiotis, Asimakis; Ladas, Alexandros; Adigun, Olayinka; Jelenc, David

2016-05-01

The growing number of events affecting public safety and security (PS&S) on a regional scale with potential to grow up to large scale cross border disasters puts an increased pressure on agencies and organisation responsible for PS&S. In order to respond timely and in an adequate manner to such events, Public Protection and Disaster Relief (PPDR) organisations need to cooperate, align their procedures and activities, share the needed information and be interoperable. Existing PPDR/PMR technologies such as TETRA, TETRAPOL or P25, do not currently provide broadband capability nor is expected such technologies to be upgraded in the future. This presents a major limitation in supporting new services and information flows. Furthermore, there is no known standard that addresses interoperability of these technologies. In this contribution the design of a next generation communication infrastructure for PPDR organisations which fulfills the requirements of secure and seamless end-to-end communication and interoperable information exchange within the deployed communication networks is presented. Based on Enterprise Architecture of PPDR organisations, a next generation PPDR network that is backward compatible with legacy communication technologies is designed and implemented, capable of providing security, privacy, seamless mobility, QoS and reliability support for mission-critical Private Mobile Radio (PMR) voice and broadband data services. The designed solution provides a robust, reliable, and secure mobile broadband communications system for a wide variety of PMR applications and services on PPDR broadband networks, including the ability of inter-system, interagency and cross-border operations with emphasis on interoperability between users in PMR and LTE.

Unmanned Ground Vehicle (UGV) Interoperability Laboratory

Data.gov (United States)

Federal Laboratory Consortium — The UGV Interoperability Lab provides the capability to verify vendor conformance against government-defined interoperability profiles (IOPs). This capability allows...

Is There Evidence of Cost Benefits of Electronic Medical Records, Standards, or Interoperability in Hospital Information Systems? Overview of Systematic Reviews.

Science.gov (United States)

Reis, Zilma Silveira Nogueira; Maia, Thais Abreu; Marcolino, Milena Soriano; Becerra-Posada, Francisco; Novillo-Ortiz, David; Ribeiro, Antonio Luiz Pinho

2017-08-29

Electronic health (eHealth) interventions may improve the quality of care by providing timely, accessible information about one patient or an entire population. Electronic patient care information forms the nucleus of computerized health information systems. However, interoperability among systems depends on the adoption of information standards. Additionally, investing in technology systems requires cost-effectiveness studies to ensure the sustainability of processes for stakeholders. The objective of this study was to assess cost-effectiveness of the use of electronically available inpatient data systems, health information exchange, or standards to support interoperability among systems. An overview of systematic reviews was conducted, assessing the MEDLINE, Cochrane Library, LILACS, and IEEE Library databases to identify relevant studies published through February 2016. The search was supplemented by citations from the selected papers. The primary outcome sought the cost-effectiveness, and the secondary outcome was the impact on quality of care. Independent reviewers selected studies, and disagreement was resolved by consensus. The quality of the included studies was evaluated using a measurement tool to assess systematic reviews (AMSTAR). The primary search identified 286 papers, and two papers were manually included. A total of 211 were systematic reviews. From the 20 studies that were selected after screening the title and abstract, 14 were deemed ineligible, and six met the inclusion criteria. The interventions did not show a measurable effect on cost-effectiveness. Despite the limited number of studies, the heterogeneity of electronic systems reported, and the types of intervention in hospital routines, it was possible to identify some preliminary benefits in quality of care. Hospital information systems, along with information sharing, had the potential to improve clinical practice by reducing staff errors or incidents, improving automated harm detection

NASA's Earth Science Gateway: A Platform for Interoperable Services in Support of the GEOSS Architecture

Science.gov (United States)

Alameh, N.; Bambacus, M.; Cole, M.

2006-12-01

Nasa's Earth Science as well as interdisciplinary research and applications activities require access to earth observations, analytical models and specialized tools and services, from diverse distributed sources. Interoperability and open standards for geospatial data access and processing greatly facilitate such access among the information and processing compo¬nents related to space¬craft, airborne, and in situ sensors; predictive models; and decision support tools. To support this mission, NASA's Geosciences Interoperability Office (GIO) has been developing the Earth Science Gateway (ESG; online at http://esg.gsfc.nasa.gov) by adapting and deploying a standards-based commercial product. Thanks to extensive use of open standards, ESG can tap into a wide array of online data services, serve a variety of audiences and purposes, and adapt to technology and business changes. Most importantly, the use of open standards allow ESG to function as a platform within a larger context of distributed geoscience processing, such as the Global Earth Observing System of Systems (GEOSS). ESG shares the goals of GEOSS to ensure that observations and products shared by users will be accessible, comparable, and understandable by relying on common standards and adaptation to user needs. By maximizing interoperability, modularity, extensibility and scalability, ESG's architecture fully supports the stated goals of GEOSS. As such, ESG's role extends beyond that of a gateway to NASA science data to become a shared platform that can be leveraged by GEOSS via: A modular and extensible architecture Consensus and community-based standards (e.g. ISO and OGC standards) A variety of clients and visualization techniques, including WorldWind and Google Earth A variety of services (including catalogs) with standard interfaces Data integration and interoperability Mechanisms for user involvement and collaboration Mechanisms for supporting interdisciplinary and domain-specific applications ESG

Trends in life science grid: from computing grid to knowledge grid

Directory of Open Access Journals (Sweden)

Konagaya Akihiko

2006-12-01

Full Text Available Abstract Background Grid computing has great potential to become a standard cyberinfrastructure for life sciences which often require high-performance computing and large data handling which exceeds the computing capacity of a single institution. Results This survey reviews the latest grid technologies from the viewpoints of computing grid, data grid and knowledge grid. Computing grid technologies have been matured enough to solve high-throughput real-world life scientific problems. Data grid technologies are strong candidates for realizing "resourceome" for bioinformatics. Knowledge grids should be designed not only from sharing explicit knowledge on computers but also from community formulation for sharing tacit knowledge among a community. Conclusion Extending the concept of grid from computing grid to knowledge grid, it is possible to make use of a grid as not only sharable computing resources, but also as time and place in which people work together, create knowledge, and share knowledge and experiences in a community.

Combining Archetypes with Fast Health Interoperability Resources in Future-proof Health Information Systems.

Science.gov (United States)

Bosca, Diego; Moner, David; Maldonado, Jose Alberto; Robles, Montserrat

2015-01-01

Messaging standards, and specifically HL7 v2, are heavily used for the communication and interoperability of Health Information Systems. HL7 FHIR was created as an evolution of the messaging standards to achieve semantic interoperability. FHIR is somehow similar to other approaches like the dual model methodology as both are based on the precise modeling of clinical information. In this paper, we demonstrate how we can apply the dual model methodology to standards like FHIR. We show the usefulness of this approach for data transformation between FHIR and other specifications such as HL7 CDA, EN ISO 13606, and openEHR. We also discuss the advantages and disadvantages of defining archetypes over FHIR, and the consequences and outcomes of this approach. Finally, we exemplify this approach by creating a testing data server that supports both FHIR resources and archetypes.

OpenICE medical device interoperability platform overview and requirement analysis.

Science.gov (United States)

Arney, David; Plourde, Jeffrey; Goldman, Julian M

2018-02-23

We give an overview of OpenICE, an open source implementation of the ASTM standard F2761 for the Integrated Clinical Environment (ICE) that leverages medical device interoperability, together with an analysis of the clinical and non-functional requirements and community process that inspired its design.

Standardized UXO Technology Demonstration Site Blind Grid Scoring Record No. 810 (FEREX Fluxgate Gradient Magnetometer/Sling)

National Research Council Canada - National Science Library

Fling, Rick; McClung, Christina; Banta, Matthew; Burch, William; Karwatka, Michael; McDonnell, Patrick

2007-01-01

...) utilizing the APG Standardized UXO Technology Demonstration Site Blind Grid. This Scoring Record was coordinated by Michael Karwatka and the Standardized UXO Technology Demonstration Site Scoring Committee...

Improving Patient Safety with X-Ray and Anesthesia Machine Ventilator Synchronization: A Medical Device Interoperability Case Study

Science.gov (United States)

Arney, David; Goldman, Julian M.; Whitehead, Susan F.; Lee, Insup

When a x-ray image is needed during surgery, clinicians may stop the anesthesia machine ventilator while the exposure is made. If the ventilator is not restarted promptly, the patient may experience severe complications. This paper explores the interconnection of a ventilator and simulated x-ray into a prototype plug-and-play medical device system. This work assists ongoing interoperability framework development standards efforts to develop functional and non-functional requirements and illustrates the potential patient safety benefits of interoperable medical device systems by implementing a solution to a clinical use case requiring interoperability.

An ontology for regulating eHealth interoperability in developing African countries

CSIR Research Space (South Africa)

Moodley, D

2013-08-01

Full Text Available eHealth governance and regulation are necessary in low resource African countries to ensure effective and equitable use of health information technology and to realize national eHealth goals such as interoperability, adoption of standards and data...

Interoperability of remote handling control system software modules at Divertor Test Platform 2 using middleware

Energy Technology Data Exchange (ETDEWEB)

Tuominen, Janne, E-mail: janne.m.tuominen@tut.fi [Tampere University of Technology, Department of Intelligent Hydraulics and Automation, Tampere (Finland); Rasi, Teemu; Mattila, Jouni [Tampere University of Technology, Department of Intelligent Hydraulics and Automation, Tampere (Finland); Siuko, Mikko [VTT, Technical Research Centre of Finland, Tampere (Finland); Esque, Salvador [F4E, Fusion for Energy, Torres Diagonal Litoral B3, Josep Pla2, 08019, Barcelona (Spain); Hamilton, David [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France)

2013-10-15

Highlights: ► The prototype DTP2 remote handling control system is a heterogeneous collection of subsystems, each realizing a functional area of responsibility. ► Middleware provides well-known, reusable solutions to problems, such as heterogeneity, interoperability, security and dependability. ► A middleware solution was selected and integrated with the DTP2 RH control system. The middleware was successfully used to integrate all relevant subsystems and functionality was demonstrated. -- Abstract: This paper focuses on the inter-subsystem communication channels in a prototype distributed remote handling control system at Divertor Test Platform 2 (DTP2). The subsystems are responsible for specific tasks and, over the years, their development has been carried out using various platforms and programming languages. The communication channels between subsystems have different priorities, e.g. very high messaging rate and deterministic timing or high reliability in terms of individual messages. Generally, a control system's communication infrastructure should provide interoperability, scalability, performance and maintainability. An attractive approach to accomplish this is to use a standardized and proven middleware implementation. The selection of a middleware can have a major cost impact in future integration efforts. In this paper we present development done at DTP2 using the Object Management Group's (OMG) standard specification for Data Distribution Service (DDS) for ensuring communications interoperability. DDS has gained a stable foothold especially in the military field. It lacks a centralized broker, thereby avoiding a single-point-of-failure. It also includes an extensive set of Quality of Service (QoS) policies. The standard defines a platform- and programming language independent model and an interoperability wire protocol that enables DDS vendor interoperability, allowing software developers to avoid vendor lock-in situations.

A Metadata Standard for Hydroinformatic Data Conforming to International Standards

Science.gov (United States)

Notay, Vikram; Carstens, Georg; Lehfeldt, Rainer

2017-04-01

The affordable availability of computing power and digital storage has been a boon for the scientific community. The hydroinformatics community has also benefitted from the so-called digital revolution, which has enabled the tackling of more and more complex physical phenomena using hydroinformatic models, instruments, sensors, etc. With models getting more and more complex, computational domains getting larger and the resolution of computational grids and measurement data getting finer, a large amount of data is generated and consumed in any hydroinformatics related project. The ubiquitous availability of internet also contributes to this phenomenon with data being collected through sensor networks connected to telecommunications networks and the internet long before the term Internet of Things existed. Although generally good, this exponential increase in the number of available datasets gives rise to the need to describe this data in a standardised way to not only be able to get a quick overview about the data but to also facilitate interoperability of data from different sources. The Federal Waterways Engineering and Research Institute (BAW) is a federal authority of the German Federal Ministry of Transport and Digital Infrastructure. BAW acts as a consultant for the safe and efficient operation of the German waterways. As part of its consultation role, BAW operates a number of physical and numerical models for sections of inland and marine waterways. In order to uniformly describe the data produced and consumed by these models throughout BAW and to ensure interoperability with other federal and state institutes on the one hand and with EU countries on the other, a metadata profile for hydroinformatic data has been developed at BAW. The metadata profile is composed in its entirety using the ISO 19115 international standard for metadata related to geographic information. Due to the widespread use of the ISO 19115 standard in the existing geodata infrastructure

GridCom, Grid Commander: graphical interface for Grid jobs and data management; GridCom, Grid Commander: graficheskij interfejs dlya raboty s zadachami i dannymi v gride

Energy Technology Data Exchange (ETDEWEB)

Galaktionov, V V

2011-07-01

GridCom - the software package for maintenance of automation of access to means of distributed system Grid (jobs and data). The client part, executed in the form of Java-applets, realises the Web-interface access to Grid through standard browsers. The executive part Lexor (LCG Executor) is started by the user in UI (User Interface) machine providing performance of Grid operations

Designing learning management system interoperability in semantic web

Science.gov (United States)

Anistyasari, Y.; Sarno, R.; Rochmawati, N.

2018-01-01

The extensive adoption of learning management system (LMS) has set the focus on the interoperability requirement. Interoperability is the ability of different computer systems, applications or services to communicate, share and exchange data, information, and knowledge in a precise, effective and consistent way. Semantic web technology and the use of ontologies are able to provide the required computational semantics and interoperability for the automation of tasks in LMS. The purpose of this study is to design learning management system interoperability in the semantic web which currently has not been investigated deeply. Moodle is utilized to design the interoperability. Several database tables of Moodle are enhanced and some features are added. The semantic web interoperability is provided by exploited ontology in content materials. The ontology is further utilized as a searching tool to match user’s queries and available courses. It is concluded that LMS interoperability in Semantic Web is possible to be performed.

Special issue on enabling open and interoperable access to Planetary Science and Heliophysics databases and tools

Science.gov (United States)

2018-01-01

The large amount of data generated by modern space missions calls for a change of organization of data distribution and access procedures. Although long term archives exist for telescopic and space-borne observations, high-level functions need to be developed on top of these repositories to make Planetary Science and Heliophysics data more accessible and to favor interoperability. Results of simulations and reference laboratory data also need to be integrated to support and interpret the observations. Interoperable software and interfaces have recently been developed in many scientific domains. The Virtual Observatory (VO) interoperable standards developed for Astronomy by the International Virtual Observatory Alliance (IVOA) can be adapted to Planetary Sciences, as demonstrated by the VESPA (Virtual European Solar and Planetary Access) team within the Europlanet-H2020-RI project. Other communities have developed their own standards: GIS (Geographic Information System) for Earth and planetary surfaces tools, SPASE (Space Physics Archive Search and Extract) for space plasma, PDS4 (NASA Planetary Data System, version 4) and IPDA (International Planetary Data Alliance) for planetary mission archives, etc, and an effort to make them interoperable altogether is starting, including automated workflows to process related data from different sources.

Challenges and Approaches to Make Multidisciplinary Team Meetings Interoperable - The KIMBo Project.

Science.gov (United States)

Krauss, Oliver; Holzer, Karl; Schuler, Andreas; Egelkraut, Reinhard; Franz, Barbara

2017-01-01

Multidisciplinary team meetings (MDTMs) are already in use for certain areas in healthcare (e.g. treatment of cancer). Due to the lack of common standards and accessibility for the applied IT systems, their potential is not yet completely exploited. Common requirements for MDTMs shall be identified and aggregated into a process definition to be automated by an application architecture utilizing modern standards in electronic healthcare, e.g. HL7 FHIR. To identify requirements, an extensive literature review as well as semi-structured expert interviews were conducted. Results showed, that interoperability and flexibility in terms of the process are key requirements to be addressed. An architecture blueprint as well as an aggregated process definition were derived from the insights gained. To evaluate the feasibility of identified requirements, methods of explorative prototyping in software engineering were used. MDTMs will become an important part of modern and future healthcare but the need for standardization in terms of interoperability is imminent.

XML interoperability standards for seamless communication: An analysis of industry-neutral and domain-specific initiatives

NARCIS (Netherlands)

Chituc, C.M.

2017-01-01

Attaining seamless interoperability among heterogeneous communication systems and technologies remains a great challenge in todays’ networked world. Real time information exchange among heterogeneous and geographically distributed systems is required to support the execution of complex e-business

Datacube Interoperability, Encoding Independence, and Analytics

Science.gov (United States)

Baumann, Peter; Hirschorn, Eric; Maso, Joan

2017-04-01

Datacubes are commonly accepted as an enabling paradigm which provides a handy abstraction for accessing and analyzing the zillions of image files delivered by the manifold satellite instruments and climate simulations, among others. Additionally, datacubes are the classic model for statistical and OLAP datacubes, so a further information category can be integrated. From a standards perspective, spatio-temporal datacubes naturally are included in the concept of coverages which encompass regular and irregular grids, point clouds, and general meshes - or, more abstractly, digital representations of spatio-temporally varying phenomena. ISO 19123, which is identical to OGC Abstract Topic 6, gives a high-level abstract definition which is complemented by the OGC Coverage Implementation Schema (CIS) which is an interoperable, yet format independent concretization of the abstract model. Currently, ISO is working on adopting OGC CIS as ISO 19123-2; the existing ISO 19123 standard is under revision by one of the abstract authors and will become ISO 19123-1. The roadmap agreed by ISO further foresees adoption of the OGC Web Coverage Service (WCS) as an ISO standard so that a complete data and service model will exist. In 2016, INSPIRE has adopted WCS as Coverage Download Service, including the datacube analytics language Web Coverage Processing Service (WCPS). The rasdaman technology (www.rasdaman.org) is both OGC and INSPIRE Reference Implementation. In the global EarthServer initiative rasdaman database sizes are exceeding 250 TB today, heading for the Petabyte frontier well in 2017. Technically, CIS defines a compact, efficient model for representing multi-dimensional datacubes in several ways. The classical coverage cube defines a domain set (where are values?), a range set (what are these values?), and range type (what do the values mean?), as well as a "bag" for arbitrary metadata. With CIS 1.1, coordinate/value pair sequences have been added, as well as tiled

Latest developments for the IAGOS database: Interoperability and metadata

Science.gov (United States)

Boulanger, Damien; Gautron, Benoit; Thouret, Valérie; Schultz, Martin; van Velthoven, Peter; Broetz, Bjoern; Rauthe-Schöch, Armin; Brissebrat, Guillaume

2014-05-01

In-service Aircraft for a Global Observing System (IAGOS, http://www.iagos.org) aims at the provision of long-term, frequent, regular, accurate, and spatially resolved in situ observations of the atmospheric composition. IAGOS observation systems are deployed on a fleet of commercial aircraft. The IAGOS database is an essential part of the global atmospheric monitoring network. Data access is handled by open access policy based on the submission of research requests which are reviewed by the PIs. Users can access the data through the following web sites: http://www.iagos.fr or http://www.pole-ether.fr as the IAGOS database is part of the French atmospheric chemistry data centre ETHER (CNES and CNRS). The database is in continuous development and improvement. In the framework of the IGAS project (IAGOS for GMES/COPERNICUS Atmospheric Service), major achievements will be reached, such as metadata and format standardisation in order to interoperate with international portals and other databases, QA/QC procedures and traceability, CARIBIC (Civil Aircraft for the Regular Investigation of the Atmosphere Based on an Instrument Container) data integration within the central database, and the real-time data transmission. IGAS work package 2 aims at providing the IAGOS data to users in a standardized format including the necessary metadata and information on data processing, data quality and uncertainties. We are currently redefining and standardizing the IAGOS metadata for interoperable use within GMES/Copernicus. The metadata are compliant with the ISO 19115, INSPIRE and NetCDF-CF conventions. IAGOS data will be provided to users in NetCDF or NASA Ames format. We also are implementing interoperability between all the involved IAGOS data services, including the central IAGOS database, the former MOZAIC and CARIBIC databases, Aircraft Research DLR database and the Jülich WCS web application JOIN (Jülich OWS Interface) which combines model outputs with in situ data for

Growing pains: medical device interoperability. Regulators and new standards are helping to bring about the convergence of medical devices and information management systems on IT networks.

Science.gov (United States)

Degaspari, John

2011-07-01

Both provider organizations and medical device vendors have made significant, if slow-going, progress over the last several years to network their digitally-enabled medical devices. Recent strides in both the regulatory and standards arenas have provided renewed impetus on the part of both stakeholder groups to bring more interoperability to disparate medical devices, resulting in better security and quality of patient data.

Contribution of Clinical Archetypes, and the Challenges, towards Achieving Semantic Interoperability for EHRs.

Science.gov (United States)

Tapuria, Archana; Kalra, Dipak; Kobayashi, Shinji

2013-12-01

The objective is to introduce 'clinical archetype' which is a formal and agreed way of representing clinical information to ensure interoperability across and within Electronic Health Records (EHRs). The paper also aims at presenting the challenges building quality labeled clinical archetypes and the challenges towards achieving semantic interoperability between EHRs. Twenty years of international research, various European healthcare informatics projects and the pioneering work of the openEHR Foundation have led to the following results. The requirements for EHR information architectures have been consolidated within ISO 18308 and adopted within the ISO 13606 EHR interoperability standard. However, a generic EHR architecture cannot ensure that the clinical meaning of information from heterogeneous sources can be reliably interpreted by receiving systems and services. Therefore, clinical models called 'clinical archetypes' are required to formalize the representation of clinical information within the EHR. Part 2 of ISO 13606 defines how archetypes should be formally represented. The current challenge is to grow clinical communities to build a library of clinical archetypes and to identify how evidence of best practice and multi-professional clinical consensus should best be combined to define archetypes at the optimal level of granularity and specificity and quality label them for wide adoption. Standardizing clinical terms within EHRs using clinical terminology like Systematized Nomenclature of Medicine Clinical Terms is also a challenge. Clinical archetypes would play an important role in achieving semantic interoperability within EHRs. Attempts are being made in exploring the design and adoption challenges for clinical archetypes.

Impact of coalition interoperability on PKI

Science.gov (United States)

Krall, Edward J.

2003-07-01

This paper examines methods for providing PKI interoperability among units of a coalition of armed forces drawn from different nations. The area in question is tactical identity management, for the purposes of confidentiality, integrity and non-repudiation in such a dynamic coalition. The interoperating applications under consideration range from email and other forms of store-and-forward messaging to TLS and IPSEC-protected real-time communications. Six interoperability architectures are examined with advantages and disadvantages of each described in the paper.

The architecture of a virtual grid GIS server

Science.gov (United States)

Wu, Pengfei; Fang, Yu; Chen, Bin; Wu, Xi; Tian, Xiaoting

2008-10-01

The grid computing technology provides the service oriented architecture for distributed applications. The virtual Grid GIS server is the distributed and interoperable enterprise application GIS architecture running in the grid environment, which integrates heterogeneous GIS platforms. All sorts of legacy GIS platforms join the grid as members of GIS virtual organization. Based on Microkernel we design the ESB and portal GIS service layer, which compose Microkernel GIS. Through web portals, portal GIS services and mediation of service bus, following the principle of SoC, we separate business logic from implementing logic. Microkernel GIS greatly reduces the coupling degree between applications and GIS platforms. The enterprise applications are independent of certain GIS platforms, and making the application developers to pay attention to the business logic. Via configuration and orchestration of a set of fine-grained services, the system creates GIS Business, which acts as a whole WebGIS request when activated. In this way, the system satisfies a business workflow directly and simply, with little or no new code.

Medical image registration algorithms assesment Bronze Standard application enactment on grids using the MOTEUR workflow engine

CERN Document Server

Glatard, T; Pennec, X

2006-01-01

Medical image registration is pre-processing needed for many medical image analysis procedures. A very large number of registration algorithms are available today, but their performance is often not known and very difficult to assess due to the lack of gold standard. The Bronze Standard algorithm is a very data and compute intensive statistical approach for quantifying registration algorithms accuracy. In this paper, we describe the Bronze Standard application and we discuss the need for grids to tackle such computations on medical image databases. We demonstrate MOTEUR, a service-based workflow engine optimized for dealing with data intensive applications. MOTEUR eases the enactment of the Bronze Standard and similar applications on the EGEE production grid infrastructure. It is a generic workflow engine, based on current standards and freely available, that can be used to instrument legacy application code at low cost.

A step-by-step methodology for enterprise interoperability projects

Science.gov (United States)

Chalmeta, Ricardo; Pazos, Verónica

2015-05-01

Enterprise interoperability is one of the key factors for enhancing enterprise competitiveness. Achieving enterprise interoperability is an extremely complex process which involves different technological, human and organisational elements. In this paper we present a framework to help enterprise interoperability. The framework has been developed taking into account the three domains of interoperability: Enterprise Modelling, Architecture and Platform and Ontologies. The main novelty of the framework in comparison to existing ones is that it includes a step-by-step methodology that explains how to carry out an enterprise interoperability project taking into account different interoperability views, like business, process, human resources, technology, knowledge and semantics.

The anatomy of the grid : enabling scalable virtual organizations.

Energy Technology Data Exchange (ETDEWEB)

Foster, I.; Kesselman, C.; Tuecke, S.; Mathematics and Computer Science; Univ. of Chicago; Univ. of Southern California

2001-10-01

'Grid' computing has emerged as an important new field, distinguished from conventional distributed computing by its focus on large-scale resource sharing, innovative applications, and, in some cases, high performance orientation. In this article, the authors define this new field. First, they review the 'Grid problem,' which is defined as flexible, secure, coordinated resource sharing among dynamic collections of individuals, institutions, and resources -- what is referred to as virtual organizations. In such settings, unique authentication, authorization, resource access, resource discovery, and other challenges are encountered. It is this class of problem that is addressed by Grid technologies. Next, the authors present an extensible and open Grid architecture, in which protocols, services, application programming interfaces, and software development kits are categorized according to their roles in enabling resource sharing. The authors describe requirements that they believe any such mechanisms must satisfy and discuss the importance of defining a compact set of intergrid protocols to enable interoperability among different Grid systems. Finally, the authors discuss how Grid technologies relate to other contemporary technologies, including enterprise integration, application service provider, storage service provider, and peer-to-peer computing. They maintain that Grid concepts and technologies complement and have much to contribute to these other approaches.

Interoperability requirements for a South African joint command and control test facility

CSIR Research Space (South Africa)

Le Roux, WH

2008-06-01

Full Text Available approach is followed to provide all the necessary services, mechanisms and functionalities. Since simulations and simulators form part of such a facility, interoperability standards are very important, as well as the underlying data model. The high...

Look who's talking. A guide to interoperability groups and resources.

Science.gov (United States)

2011-06-01

There are huge challenges in getting medical devices to communicate with other devices and to information systems. Fortunately, a number of groups have emerged to help hospitals cope. Here's a description of the most prominent ones, including useful web links for each. We also discuss the latest and most pertinent interoperability standards.

IT-Enabled Integration of Renewables: A Concept for the Smart Power Grid

Directory of Open Access Journals (Sweden)

Sauter Thilo

2011-01-01

Full Text Available The wide utilisation of information and communication technologies is hoped to enable a more efficient and sustainable operation of electric power grids. This paper analyses the benefits of smart power grids for the integration of renewable energy resources into the existing grid infrastructure. Therefore, the concept of a smart power grid is analysed, and it is shown that it covers more than for example, time-of-use energy tariffs. Further, the communication technologies used for smart grids are discussed, and the challenge of interoperability between the smart grid itself and its active contributors such as functional buildings is shown. A significant share of electrical energy demand is and will be constituted by large functional buildings that are mostly equipped with automation systems and therefore enable a relatively simple IT integration into smart grids. This large potential of thermal storages and flexible consumption processes might be a future key to match demand and supply under the presence of a high share of fluctuating generation from renewables.

Ocean Data Interoperability Platform (ODIP): developing a common framework for global marine data management

Science.gov (United States)

Glaves, H. M.

2015-12-01

In recent years marine research has become increasingly multidisciplinary in its approach with a corresponding rise in the demand for large quantities of high quality interoperable data as a result. This requirement for easily discoverable and readily available marine data is currently being addressed by a number of regional initiatives with projects such as SeaDataNet in Europe, Rolling Deck to Repository (R2R) in the USA and the Integrated Marine Observing System (IMOS) in Australia, having implemented local infrastructures to facilitate the exchange of standardised marine datasets. However, each of these systems has been developed to address local requirements and created in isolation from those in other regions.Multidisciplinary marine research on a global scale necessitates a common framework for marine data management which is based on existing data systems. The Ocean Data Interoperability Platform project is seeking to address this requirement by bringing together selected regional marine e-infrastructures for the purposes of developing interoperability across them. By identifying the areas of commonality and incompatibility between these data infrastructures, and leveraging the development activities and expertise of these individual systems, three prototype interoperability solutions are being created which demonstrate the effective sharing of marine data and associated metadata across the participating regional data infrastructures as well as with other target international systems such as GEO, COPERNICUS etc.These interoperability solutions combined with agreed best practice and approved standards, form the basis of a common global approach to marine data management which can be adopted by the wider marine research community. To encourage implementation of these interoperability solutions by other regional marine data infrastructures an impact assessment is being conducted to determine both the technical and financial implications of deploying them

Restructuring an EHR system and the Medical Markup Language (MML) standard to improve interoperability by archetype technology.

Science.gov (United States)

Kobayashi, Shinji; Kume, Naoto; Yoshihara, Hiroyuki

2015-01-01

In 2001, we developed an EHR system for regional healthcare information inter-exchange and to provide individual patient data to patients. This system was adopted in three regions in Japan. We also developed a Medical Markup Language (MML) standard for inter- and intra-hospital communications. The system was built on a legacy platform, however, and had not been appropriately maintained or updated to meet clinical requirements. To improve future maintenance costs, we reconstructed the EHR system using archetype technology on the Ruby on Rails platform, and generated MML equivalent forms from archetypes. The system was deployed as a cloud-based system for preliminary use as a regional EHR. The system now has the capability to catch up with new requirements, maintaining semantic interoperability with archetype technology. It is also more flexible than the legacy EHR system.

FLTSATCOM interoperability applications

Science.gov (United States)

Woolford, Lynn

A mobile Fleet Satellite Communications (FLTSATCOM) system called the Mobile Operational Control Center (MOCC) was developed which has demonstrated the ability to be interoperable with many of the current FLTSATCOM command and control channels. This low-cost system is secure in all its communications, is lightweight, and provides a gateway for other communications formats. The major elements of this system are made up of a personal computer, a protocol microprocessor, and off-the-shelf mobile communication components. It is concluded that with both FLTSATCOM channel protocol and data format interoperability, the MOCC has the ability provide vital information in or near real time, which significantly improves mission effectiveness.

Information architecture: Profile of adopted standards

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-09-01

The Department of Energy (DOE), like other Federal agencies, is under increasing pressure to use information technology to improve efficiency in mission accomplishment as well as delivery of services to the public. Because users and systems have become interdependent, DOE has enterprise wide needs for common application architectures, communication networks, databases, security, and management capabilities. Users need open systems that provide interoperability of products and portability of people, data, and applications that are distributed throughout heterogeneous computing environments. The level of interoperability necessary requires the adoption of DOE wide standards, protocols, and best practices. The Department has developed an information architecture and a related standards adoption and retirement process to assist users in developing strategies and plans for acquiring information technology products and services based upon open systems standards that support application software interoperability, portability, and scalability. This set of Departmental Information Architecture standards represents guidance for achieving higher degrees of interoperability within the greater DOE community, business partners, and stakeholders. While these standards are not mandatory, particular and due consideration of their applications in contractual matters and use in technology implementations Department wide are goals of the Chief Information Officer.

Technology Readiness for the Smart Grid

Energy Technology Data Exchange (ETDEWEB)

Kirkham, Harold; Marinovici, Maria C.; Fitzpatrick, G.; Lindsey, K.; McBride, James; Clark, G. L.

2013-06-30

Reluctance to adopt new technology into a utility application is understandable, given the critical nature of the infrastructure and the less-than-ideal experiences of some power companies. The authors of this paper have considered adapting the NASA approach of classifying technology readiness, but find it not quite appropriate because NASA was both the developer and the eventual user of the new technology it was evaluating, whereas a utility is ordinarily in the mode of a customer, acquiring a new product from a manufacturer. Instead of a generic scale of technology readiness, a scale of readiness is proposed specifically for the smart grid, based on the many standards that exist for the relevant technologies. In this paper we present an overall structure for organization those standards. The acceptance of new technology is organized into five SGL (Smart Grid Level) steps, numbered five through 9 to correspond approximately to the last five numbers of the NASA TRL scale. SGL 5 is a certification that the hardware and software of the technology is safe for the system into which is intended to be placed. SGL 6 is documentation that the system is safe for itself, and will have adequate reliability. It is thus clear that the steps differ from NASA’s TRL in that technology development is not required, the transition is more one of documenting already existing system readiness. Since SGL 6 describes a system that is safe for the power system and for itself, it should not be restricted from being in a pilot-scale study, and achieving SGL 7. A larger-scale demonstration in a realistic environment will demonstrate interoperability and achieve SGL 8. Only when systems are installed and operating, and when disposal plans are in place will the designation of fully operable at SGL 9 be granted.

Main report for the task of the Smart Grid Network; Denmark; Hovedrapport for Smart Grid Netvaerkets arbejde

Energy Technology Data Exchange (ETDEWEB)

Lidegaard, M.

2011-07-01

The Smart Grid Network was established in 2010 by the Danish climate and energy minister tasked with developing recommendations for future actions and initiatives that make it possible to handle up to 50% electricity from wind energy in the power system in 2020. Smart Grid will not be realized without ensuring reasonable conditions for actors in the system. It is essential to establish a clear market model with clear roles and responsibilities. Additionally there is a need for development and implementation of a future communication and control concept, which makes it possible to achieve the best possible interaction between the management of power system, power generation and electricity consumption. The future demands that both the commercial and technical data communications paths and systems will be expanded and supplemented with connections for significantly more renewable energy production at all levels in the grid. And most importantly there must be established entirely new interoperable communication structures for both commercial and technical utilization of the consumption part of the power system. In order to realize an effective deployment of Smart Grid in 2020 with up to 50 % of renewable energy production there is a need to implement a number of initiatives. The present report presents the network's nine main recommendations and 35 specific sub-recommendations. (LN)

Interoperability for Enterprise Systems and Applications

CERN Document Server

Jardim-Gonçalves, Ricardo; Popplewell, Keith; Mendonça, João

2016-01-01

A concise reference to the state of the art in systems interoperability, Enterprise Interoperability VII will be of great value to engineers and computer scientists working in manufacturing and other process industries and to software engineers and electronic and manufacturing engineers working in the academic environment. Furthermore, it shows how knowledge of the meaning within information and the use to which it will be put have to be held in common between enterprises for consistent and efficient inter-enterprise networks. Over 30 papers, ranging from academic research through case studies to industrial and administrative experience of interoperability show how, in a scenario of globalised markets, where the capacity to cooperate with other organizations efficiently is essential in order to remain economically, socially and environmentally cost-effective, the most innovative digitized and networked enterprises ensure that their systems and applications are able to interoperate across heterogeneous collabo...

A Proposed Engineering Process and Prototype Toolset for Developing C2-to-Simulation Interoperability Solutions

NARCIS (Netherlands)

Gautreau, B.; Khimeche, L.; Reus, N.M. de; Heffner, K.; Mevassvik, O.M.

2014-01-01

The Coalition Battle Management Language (C-BML) is an open standard being developed for the exchange of digitized military information among command and control (C2), simulation and autonomous systems by the Simulation Interoperability Standards Organization (SISO). As the first phase of the C-BML

Interoperability at ESA Heliophysics Science Archives: IVOA, HAPI and other implementations

Science.gov (United States)

Martinez-Garcia, B.; Cook, J. P.; Perez, H.; Fernandez, M.; De Teodoro, P.; Osuna, P.; Arnaud, M.; Arviset, C.

2017-12-01

The data of ESA heliophysics science missions are preserved at the ESAC Science Data Centre (ESDC). The ESDC aims for the long term preservation of those data, which includes missions such as Ulysses, Soho, Proba-2, Cluster, Double Star, and in the future, Solar Orbiter. Scientists have access to these data through web services, command line and graphical user interfaces for each of the corresponding science mission archives. The International Virtual Observatory Alliance (IVOA) provides technical standards that allow interoperability among different systems that implement them. By adopting some IVOA standards, the ESA heliophysics archives are able to share their data with those tools and services that are VO-compatible. Implementation of those standards can be found in the existing archives: Ulysses Final Archive (UFA) and Soho Science Archive (SSA). They already make use of VOTable format definition and Simple Application Messaging Protocol (SAMP). For re-engineered or new archives, the implementation of services through Table Access Protocol (TAP) or Universal Worker Service (UWS) will leverage this interoperability. This will be the case for the Proba-2 Science Archive (P2SA) and the Solar Orbiter Archive (SOAR). We present here which IVOA standards were already used by the ESA Heliophysics archives in the past and the work on-going.

Model for Trans-sector Digital Interoperability

NARCIS (Netherlands)

Madureira, António; den Hartog, Frank; Goncalves da Silva, Eduardo; Baken, Nico; Zhao, L.; Macaulay, L.

2009-01-01

Interoperability refers to the ability of two or more systems or components to exchange information and to use the information that has been exchanged. The importance of interoperability has grown together with the adoption of Digital Information Networks (DINs). DINs refer to information networks

Model for Trans-sector Digital Interoperability

NARCIS (Netherlands)

Madureira, A.; Den Hartog, F.; Silva, E.; Baken, N.

2010-01-01

Interoperability refers to the ability of two or more systems or components to exchange information and to use the information that has been exchanged. The importance of interoperability has grown together with the adoption of Digital Information Networks (DINs). DINs refer to information networks

Model for Trans-sector Digital Interoperability

NARCIS (Netherlands)

Popplewell, Keith; Madureira, António; Harding, Jenny; den Hartog, Frank; Goncalves da Silva, Eduardo; Poler, Raul; Chalmeta, Ricardo; Baken, Nico

Interoperability refers to the ability of two or more systems or components to exchange information and to use the information that has been exchanged. The importance of interoperability has grown together with the adoption of Digital Information Networks (DINs). DINs refer to information networks

The task of the Smart Grid Network. Summary and recommendations; Denmark; Smart Grid Netvaerkets arbejde. Sammenfatning og anbefalinger

Energy Technology Data Exchange (ETDEWEB)

Lidegaard, M.

2011-10-15

The Smart Grid Network was established in 2010 by the Danish climate and energy minister tasked with developing recommendations for future actions and initiatives that make it possible to handle up to 50% electricity from wind energy in the power system in 2020. The present report presents a summary of the network's main recommendations. Smart Grid will not be realized without ensuring reasonable conditions for actors in the system. It is essential to establish a clear market model with clear roles and responsibilities. Additionally there is a need for development and implementation of a future communication and control concept, which makes it possible to achieve the best possible interaction between the management of power system, power generation and electricity consumption. The future demands that both the commercial and technical data communications paths and systems will be expanded and supplemented with connections for significantly more renewable energy production at all levels in the grid. And most importantly there must be established entirely new interoperable communication structures for both commercial and technical utilization of the consumption part of the power system. In order to realize an effective deployment of Smart Grid in 2020 with up to 50 % of renewable energy production there is a need to implement a number of initiatives. The Smart Grid Network identifies nine main recommendations. (LN)

Smart grid

International Nuclear Information System (INIS)

Choi, Dong Bae

2001-11-01

This book describes press smart grid from basics to recent trend. It is divided into ten chapters, which deals with smart grid as green revolution in energy with introduction, history, the fields, application and needed technique for smart grid, Trend of smart grid in foreign such as a model business of smart grid in foreign, policy for smart grid in U.S.A, Trend of smart grid in domestic with international standard of smart grid and strategy and rood map, smart power grid as infrastructure of smart business with EMS development, SAS, SCADA, DAS and PQMS, smart grid for smart consumer, smart renewable like Desertec project, convergence IT with network and PLC, application of an electric car, smart electro service for realtime of electrical pricing system, arrangement of smart grid.

The challenge of networked enterprises for cloud computing interoperability

OpenAIRE

Mezgár, István; Rauschecker, Ursula

2014-01-01

Manufacturing enterprises have to organize themselves into effective system architectures forming different types of Networked Enterprises (NE) to match fast changing market demands. Cloud Computing (CC) is an important up to date computing concept for NE, as it offers significant financial and technical advantages beside high-level collaboration possibilities. As cloud computing is a new concept the solutions for handling interoperability, portability, security, privacy and standardization c...

Styx Grid Services: Lightweight Middleware for Efficient Scientific Workflows

Directory of Open Access Journals (Sweden)

J.D. Blower

2006-01-01

Full Text Available The service-oriented approach to performing distributed scientific research is potentially very powerful but is not yet widely used in many scientific fields. This is partly due to the technical difficulties involved in creating services and workflows and the inefficiency of many workflow systems with regard to handling large datasets. We present the Styx Grid Service, a simple system that wraps command-line programs and allows them to be run over the Internet exactly as if they were local programs. Styx Grid Services are very easy to create and use and can be composed into powerful workflows with simple shell scripts or more sophisticated graphical tools. An important feature of the system is that data can be streamed directly from service to service, significantly increasing the efficiency of workflows that use large data volumes. The status and progress of Styx Grid Services can be monitored asynchronously using a mechanism that places very few demands on firewalls. We show how Styx Grid Services can interoperate with with Web Services and WS-Resources using suitable adapters.

Ten questions concerning integrating smart buildings into the smart grid

Energy Technology Data Exchange (ETDEWEB)

Lawrence, Thomas M.; Boudreau, Marie-Claude; Helsen, Lieve; Henze, Gregor; Mohammadpour, Javad; Noonan, Doug; Patteeuw, Dieter; Pless, Shanti; Watson, Richard T.

2016-11-01

Recent advances in information and communications technology (ICT) have initiated development of a smart electrical grid and smart buildings. Buildings consume a large portion of the total electricity production worldwide, and to fully develop a smart grid they must be integrated with that grid. Buildings can now be 'prosumers' on the grid (both producers and consumers), and the continued growth of distributed renewable energy generation is raising new challenges in terms of grid stability over various time scales. Buildings can contribute to grid stability by managing their overall electrical demand in response to current conditions. Facility managers must balance demand response requests by grid operators with energy needed to maintain smooth building operations. For example, maintaining thermal comfort within an occupied building requires energy and, thus an optimized solution balancing energy use with indoor environmental quality (adequate thermal comfort, lighting, etc.) is needed. Successful integration of buildings and their systems with the grid also requires interoperable data exchange. However, the adoption and integration of newer control and communication technologies into buildings can be problematic with older legacy HVAC and building control systems. Public policy and economic structures have not kept up with the technical developments that have given rise to the budding smart grid, and further developments are needed in both technical and non-technical areas.

Interoperability does matter

Directory of Open Access Journals (Sweden)

Manfred Goepel

2006-04-01

Full Text Available In companies, the historically developed IT systems are mostly application islands. They always produce good results if the system's requirements and surroundings are not changed and as long as a system interface is not needed. With the ever increas-ing dynamic and globalization of the market, however, these IT islands are certain to collapse. Interoperability (IO is the bid of the hour, assuming the integration of users, data, applications and processes. In the following, important IO enablers such as ETL, EAI, and SOA will be examined on the basis of practica-bility. It will be shown that especially SOA produces a surge of interoperability that could rightly be referred to as IT evolution.

Ocean Data Interoperability Platform (ODIP): developing a common framework for marine data management on a global scale

Science.gov (United States)

Schaap, Dick M. A.; Glaves, Helen

2016-04-01

Europe, the USA, and Australia are making significant progress in facilitating the discovery, access and long term stewardship of ocean and marine data through the development, implementation, population and operation of national, regional or international distributed ocean and marine observing and data management infrastructures such as SeaDataNet, EMODnet, IOOS, R2R, and IMOS. All of these developments are resulting in the development of standards and services implemented and used by their regional communities. The Ocean Data Interoperability Platform (ODIP) project is supported by the EU FP7 Research Infrastructures programme, National Science Foundation (USA) and Australian government and has been initiated 1st October 2012. Recently the project has been continued as ODIP II for another 3 years with EU HORIZON 2020 funding. ODIP includes all the major organisations engaged in ocean data management in EU, US, and Australia. ODIP is also supported by the IOC-IODE, closely linking this activity with its Ocean Data Portal (ODP) and Ocean Data Standards Best Practices (ODSBP) projects. The ODIP platform aims to ease interoperability between the regional marine data management infrastructures. Therefore it facilitates an organised dialogue between the key infrastructure representatives by means of publishing best practice, organising a series of international workshops and fostering the development of common standards and interoperability solutions. These are evaluated and tested by means of prototype projects. The presentation will give further background on the ODIP projects and the latest information on the progress of three prototype projects addressing: 1. establishing interoperability between the regional EU, USA and Australia data discovery and access services (SeaDataNet CDI, US NODC, and IMOS MCP) and contributing to the global GEOSS and IODE-ODP portals; 2. establishing interoperability between cruise summary reporting systems in Europe, the USA and

Requirements for Interoperability in Healthcare Information Systems

Directory of Open Access Journals (Sweden)

Rita Noumeir

2012-01-01

Full Text Available Interoperability is a requirement for the successful deployment of Electronic Health Records (EHR. EHR improves the quality of healthcare by enabling access to all relevant information at the diagnostic decision moment, regardless of location. It is a system that results from the cooperation of several heterogeneous distributed subsystems that need to successfully exchange information relative to a specific healthcare process. This paper analyzes interoperability impediments in healthcare by first defining them and providing concrete healthcare examples, followed by discussion of how specifications can be defined and how verification can be conducted to eliminate those impediments and ensure interoperability in healthcare. This paper also analyzes how Integrating the Healthcare Enterprise (IHE has been successful in enabling interoperability, and identifies some neglected aspects that need attention.

Interoperability challenges in river discharge modelling: A cross domain application scenario

Science.gov (United States)

Santoro, Mattia; Andres, Volker; Jirka, Simon; Koike, Toshio; Looser, Ulrich; Nativi, Stefano; Pappenberger, Florian; Schlummer, Manuela; Strauch, Adrian; Utech, Michael; Zsoter, Ervin

2018-06-01

River discharge is a critical water cycle variable, as it integrates all the processes (e.g. runoff and evapotranspiration) occurring within a river basin and provides a hydrological output variable that can be readily measured. Its prediction is of invaluable help for many water-related tasks including water resources assessment and management, flood protection, and disaster mitigation. Observations of river discharge are important to calibrate and validate hydrological or coupled land, atmosphere and ocean models. This requires using datasets from different scientific domains (Water, Weather, etc.). Typically, such datasets are provided using different technological solutions. This complicates the integration of new hydrological data sources into application systems. Therefore, a considerable effort is often spent on data access issues instead of the actual scientific question. This paper describes the work performed to address multidisciplinary interoperability challenges related to river discharge modeling and validation. This includes definition and standardization of domain specific interoperability standards for hydrological data sharing and their support in global frameworks such as the Global Earth Observation System of Systems (GEOSS). The research was developed in the context of the EU FP7-funded project GEOWOW (GEOSS Interoperability for Weather, Ocean and Water), which implemented a "River Discharge" application scenario. This scenario demonstrates the combination of river discharge observations data from the Global Runoff Data Centre (GRDC) database and model outputs produced by the European Centre for Medium-Range Weather Forecasts (ECMWF) predicting river discharge based on weather forecast information in the context of the GEOSS.

Key pillars of data interoperability in Earth Sciences - INSPIRE and beyond

Science.gov (United States)

Tomas, Robert; Lutz, Michael

2013-04-01

The well-known heterogeneity and fragmentation of data models, formats and controlled vocabularies of environmental data limit potential data users from utilising the wealth of environmental information available today across Europe. The main aim of INSPIRE1 is to improve this situation and give users possibility to access, use and correctly interpret environmental data. Over the past years number of INSPIRE technical guidelines (TG) and implementing rules (IR) for interoperability have been developed, involving hundreds of domain experts from across Europe. The data interoperability specifications, which have been developed for all 34 INSPIRE spatial data themes2, are the central component of the TG and IR. Several of these themes are related to the earth sciences, e.g. geology (including hydrogeology, geophysics and geomorphology), mineral and energy resources, soil science, natural hazards, meteorology, oceanography, hydrology and land cover. The following main pillars for data interoperability and harmonisation have been identified during the development of the specifications: Conceptual data models describe the spatial objects and their properties and relationships for the different spatial data themes. To achieve cross-domain harmonization, the data models for all themes are based on a common modelling framework (the INSPIRE Generic Conceptual Model3) and managed in a common UML repository. Harmonised vocabularies (or code lists) are to be used in data exchange in order to overcome interoperability issues caused by heterogeneous free-text and/or multi-lingual content. Since a mapping to a harmonized vocabulary could be difficult, the INSPIRE data models typically allow the provision of more specific terms from local vocabularies in addition to the harmonized terms - utilizing either the extensibility options or additional terminological attributes. Encoding. Currently, specific XML profiles of the Geography Markup Language (GML) are promoted as the standard

On MDA - SOA based Intercloud Interoperability framework

Directory of Open Access Journals (Sweden)

Tahereh Nodehi

2013-01-01

Full Text Available Cloud computing has been one of the latest technologies which assures reliable delivery of on - demand computing services over the Internet. Cloud service providers have established geographically distributed data centers and computing resources, which are available online as service. The clouds operated by different service providers working together in collaboration can open up lots more spaces for innovative scenarios with huge amount of resources provisioning on demand. However, current cloud systems do not support intercloud interoperability. This paper is thus motivated to address Intercloud Interoperabilityby analyzing different methodologies that have been applied to resolve various scenarios of interoperability. Model Driven Architecture (MDA and Service Oriented Architecture (SOA method have been used to address interoperability in various scenarios, which also opens up spaces to address intercloud interoperability by making use of these well accepted methodologies. The focus of this document is to show Intercloud Interoperability can be supported through a Model Driven approach and Service Oriented systems. Moreover, the current state of the art in Intercloud, concept and benefits of MDA and SOA are discussed in the paper. At the same time this paper also proposes a generic architecture for MDA - SOA based framework, which can be useful for developing applications which will require intercloud interoperability. The paper justi fies the usability of the framework by a use - case scenario for dynamic workload migration among heterogeneous clouds.

Interoperability in healthcare: major challenges in the creation of the enterprise environment

Science.gov (United States)

Lindsköld, L.; Wintell, M.; Lundberg, N.

2009-02-01

There is today a lack of interoperability in healthcare although the need for it is obvious. A new healthcare enterprise environment has been deployed for secure healthcare interoperability in the Western Region in Sweden (WRS). This paper is an empirical overview of the new enterprise environment supporting regional shared and transparent radiology domain information in the WRS. The enterprise environment compromises 17 radiology departments, 1,5 million inhabitants, using different RIS and PACS in a joint work-oriented network and additional cardiology, dentistry and clinical physiology departments. More than 160 terabytes of information are stored in the enterprise repository. Interoperability is developed according to the IHE mission, i.e. applying standards such as Digital Imaging and Communication in Medicine (DICOM) and Health Level 7 (HL7) to address specific clinical communication needs and support optimal patient care. The entire enterprise environment is implemented and used daily in WRS. The central prerequisites in the development of the enterprise environment in western region of Sweden were: 1) information harmonization, 2) reuse of standardized messages e.g. HL7 v2.x and v3.x, 3) development of a holistic information domain including both text and images, and 4) to create a continuous and dynamic update functionality. The central challenges in this project were: 1) the many different vendors acting in the region and the negotiations with them to apply communication roles/profiles such as HL7 (CDA, CCR), DICOM, and XML, 2) the question of whom owns the data, and 3) incomplete technical standards. This study concludes that to create a workflow that runs within an enterprise environment there are a number of central prerequisites and challenges that needs to be in place. This calls for negotiations on an international, national and regional level with standardization organizations, vendors, health management and health personnel.

IoT interoperability : a hub-based approach

OpenAIRE

Blackstock, Michael; Lea, Rodger

2014-01-01

Interoperability in the Internet of Things is critical for emerging services and applications. In this paper we advocate the use of IoT ‘hubs’ to aggregate things using web protocols, and suggest a staged approach to interoperability. In the context of a UK government funded project involving 8 IoT projects to address cross-domain IoT interoperability, we introduce the HyperCat IoT catalogue specification. We then describe the tools and techniques we developed to adapt an existing data portal...

A federated semantic metadata registry framework for enabling interoperability across clinical research and care domains.

Science.gov (United States)

Sinaci, A Anil; Laleci Erturkmen, Gokce B

2013-10-01

In order to enable secondary use of Electronic Health Records (EHRs) by bridging the interoperability gap between clinical care and research domains, in this paper, a unified methodology and the supporting framework is introduced which brings together the power of metadata registries (MDR) and semantic web technologies. We introduce a federated semantic metadata registry framework by extending the ISO/IEC 11179 standard, and enable integration of data element registries through Linked Open Data (LOD) principles where each Common Data Element (CDE) can be uniquely referenced, queried and processed to enable the syntactic and semantic interoperability. Each CDE and their components are maintained as LOD resources enabling semantic links with other CDEs, terminology systems and with implementation dependent content models; hence facilitating semantic search, much effective reuse and semantic interoperability across different application domains. There are several important efforts addressing the semantic interoperability in healthcare domain such as IHE DEX profile proposal, CDISC SHARE and CDISC2RDF. Our architecture complements these by providing a framework to interlink existing data element registries and repositories for multiplying their potential for semantic interoperability to a greater extent. Open source implementation of the federated semantic MDR framework presented in this paper is the core of the semantic interoperability layer of the SALUS project which enables the execution of the post marketing safety analysis studies on top of existing EHR systems. Copyright © 2013 Elsevier Inc. All rights reserved.

IHE based interoperability - benefits and challenges.

Science.gov (United States)

Wozak, Florian; Ammenwerth, Elske; Hörbst, Alexander; Sögner, Peter; Mair, Richard; Schabetsberger, Thomas

2008-01-01

Optimized workflows and communication between institutions involved in a patient's treatment process can lead to improved quality and efficiency in the healthcare sector. Electronic Health Records (EHRs) provide a patient-centered access to clinical data across institutional boundaries supporting the above mentioned aspects. Interoperability is regarded as vital success factor. However a clear definition of interoperability does not exist. The aim of this work is to define and to assess interoperability criteria as required for EHRs. The definition and assessment of interoperability criteria is supported by the analysis of existing literature and personal experience as well as by discussions with several domain experts. Criteria for interoperability addresses the following aspects: Interfaces, Semantics, Legal and organizational aspects and Security. The Integrating the Healthcare Enterprises initiative (IHE) profiles make a major contribution to these aspects, but they also arise new problems. Flexibility for adoption to different organizational/regional or other specific conditions is missing. Regional or national initiatives should get a possibility to realize their specific needs within the boundaries of IHE profiles. Security so far is an optional element which is one of IHE greatest omissions. An integrated security approach seems to be preferable. Irrespective of the so far practical significance of the IHE profiles it appears to be of great importance, that the profiles are constantly checked against practical experiences and are continuously adapted.

Multigrid on unstructured grids using an auxiliary set of structured grids

Energy Technology Data Exchange (ETDEWEB)

Douglas, C.C.; Malhotra, S.; Schultz, M.H. [Yale Univ., New Haven, CT (United States)

1996-12-31

Unstructured grids do not have a convenient and natural multigrid framework for actually computing and maintaining a high floating point rate on standard computers. In fact, just the coarsening process is expensive for many applications. Since unstructured grids play a vital role in many scientific computing applications, many modifications have been proposed to solve this problem. One suggested solution is to map the original unstructured grid onto a structured grid. This can be used as a fine grid in a standard multigrid algorithm to precondition the original problem on the unstructured grid. We show that unless extreme care is taken, this mapping can lead to a system with a high condition number which eliminates the usefulness of the multigrid method. Theorems with lower and upper bounds are provided. Simple examples show that the upper bounds are sharp.

The role of architecture and ontology for interoperability.

Science.gov (United States)

Blobel, Bernd; González, Carolina; Oemig, Frank; Lopéz, Diego; Nykänen, Pirkko; Ruotsalainen, Pekka

2010-01-01

Turning from organization-centric to process-controlled or even to personalized approaches, advanced healthcare settings have to meet special interoperability challenges. eHealth and pHealth solutions must assure interoperability between actors cooperating to achieve common business objectives. Hereby, the interoperability chain also includes individually tailored technical systems, but also sensors and actuators. For enabling corresponding pervasive computing and even autonomic computing, individualized systems have to be based on an architecture framework covering many domains, scientifically managed by specialized disciplines using their specific ontologies in a formalized way. Therefore, interoperability has to advance from a communication protocol to an architecture-centric approach mastering ontology coordination challenges.

PACS/information systems interoperability using Enterprise Communication Framework.

Science.gov (United States)

alSafadi, Y; Lord, W P; Mankovich, N J

1998-06-01

Interoperability among healthcare applications goes beyond connectivity to allow components to exchange structured information and work together in a predictable, coordinated fashion. To facilitate building an interoperability infrastructure, an Enterprise Communication Framework (ECF) was developed by the members of the Andover Working Group for Healthcare Interoperability (AWG-OHI). The ECF consists of four models: 1) Use Case Model, 2) Domain Information Model (DIM), 3) Interaction Model, and 4) Message Model. To realize this framework, a software component called the Enterprise Communicator (EC) is used. In this paper, we will demonstrate the use of the framework in interoperating a picture archiving and communication system (PACS) with a radiology information system (RIS).

Fiscal 2000 project for development of international standards for supporting novel industries. Standardization for enhanced interoperability between optical disk systems; 2000 nendo shinki sangyo shiengata kokusai hyojun kaihatsu jigyo seika hokokusho. Hikari disk system no sogo un'yosei kakuho no tame no hyojunka

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Research and development was carried out for the enhancement of logical format-based interoperability between optical disk systems for the purpose of presenting propositions for international standards. That is, UDF (universal disk format) defined by OSTA (Optical Storage Technology Association) was taken up against the volume/file structure defined by ISO/IEC13346, and efforts were exerted to substantiate environments for its compatibility test and to develop specifications to achieve such enhanced interoperability. In this fiscal year, specifications were drafted for application program interfaces for the UDF-based file system and UDF security augmentation. These would be presented to IEC (International Electrotechnical Commission) and OSTA, respectively. Their Japanese versions were submitted to the Ministry of Economy, Trade and Industry of Japan, for publication as standard-related information. Maintenance of UAF (universal accessible file) system-compliance test tools were accomplished in response to user requirements and to the updating of UDF-compliance test disk specification. (NEDO)

The GEOSS solution for enabling data interoperability and integrative research.

Science.gov (United States)

Nativi, Stefano; Mazzetti, Paolo; Craglia, Max; Pirrone, Nicola

2014-03-01

Global sustainability research requires an integrative research effort underpinned by digital infrastructures (systems) able to harness data and heterogeneous information across disciplines. Digital data and information sharing across systems and applications is achieved by implementing interoperability: a property of a product or system to work with other products or systems, present or future. There are at least three main interoperability challenges a digital infrastructure must address: technological, semantic, and organizational. In recent years, important international programs and initiatives are focusing on such an ambitious objective. This manuscript presents and combines the studies and the experiences carried out by three relevant projects, focusing on the heavy metal domain: Global Mercury Observation System, Global Earth Observation System of Systems (GEOSS), and INSPIRE. This research work recognized a valuable interoperability service bus (i.e., a set of standards models, interfaces, and good practices) proposed to characterize the integrative research cyber-infrastructure of the heavy metal research community. In the paper, the GEOSS common infrastructure is discussed implementing a multidisciplinary and participatory research infrastructure, introducing a possible roadmap for the heavy metal pollution research community to join GEOSS as a new Group on Earth Observation community of practice and develop a research infrastructure for carrying out integrative research in its specific domain.

Hydrological Scenario Using Tools and Applications Available in enviroGRIDS Portal

Science.gov (United States)

Bacu, V.; Mihon, D.; Stefanut, T.; Rodila, D.; Cau, P.; Manca, S.; Soru, C.; Gorgan, D.

2012-04-01

Nowadays the decision makers but also citizens are concerning with the sustainability and vulnerability of land management practices on various aspects and in particular on water quality and quantity in complex watersheds. The Black Sea Catchment is an important watershed in the Central and East Europe. In the FP7 project enviroGRIDS [1] was developed a Web Portal that incorporates different tools and applications focused on geospatial data management, hydrologic model calibration, execution and visualization and training activities. This presentation highlights, from the end-user point of view, the scenario related with hydrological models using the tools and applications available in the enviroGRIDS Web Portal [2]. The development of SWAT (Soil Water Assessment Tool) hydrological models is a well known procedure for the hydrological specialists [3]. Starting from the primary data (information related to weather, soil properties, topography, vegetation, and land management practices of the particular watershed) that are used to develop SWAT hydrological models, to specific reports, about the water quality in the studied watershed, the hydrological specialist will use different applications available in the enviroGRIDS portal. The tools and applications available through the enviroGRIDS portal are not dealing with the building up of the SWAT hydrological models. They are mainly focused on: calibration procedure (gSWAT [4]) - uses the GRID computational infrastructure to speed-up the calibration process; development of specific scenarios (BASHYT [5]) - starts from an already calibrated SWAT hydrological model and defines new scenarios; execution of scenarios (gSWATSim [6]) - executes the scenarios exported from BASHYT; visualization (BASHYT) - displays charts, tables and maps. Each application is built-up as a stack of functional layers. We combine different layers of applications by vertical interoperability in order to build the desired complex functionality. On

ETICS the international software engineering service for the grid

CERN Document Server

Di Meglio, A; Couvares, P; Ronchieri, E; Takács, E

2008-01-01

The ETICS system is a distributed software configuration, build and test system designed to fulfil the needs of improving the quality, reliability and interoperability of distributed software in general and grid software in particular. The ETICS project is a consortium of five partners (CERN, INFN, Engineering Ingegneria Informatica, 4D Soft and the University of Wisconsin-Madison). The ETICS service consists of a build and test job execution system based on the Metronome software and an integrated set of web services and software engineering tools to design, maintain and control build and test scenarios. The ETICS system allows taking into account complex dependencies among applications and middleware components and provides a rich environment to perform static and dynamic analysis of the software and execute deployment, system and interoperability tests. This paper gives an overview of the system architecture and functionality set and then describes how the EC-funded EGEE, DILIGENT and OMII-Europe projects ...

OR.NET: a service-oriented architecture for safe and dynamic medical device interoperability.

Science.gov (United States)

Kasparick, Martin; Schmitz, Malte; Andersen, Björn; Rockstroh, Max; Franke, Stefan; Schlichting, Stefan; Golatowski, Frank; Timmermann, Dirk

2018-02-23

Modern surgical departments are characterized by a high degree of automation supporting complex procedures. It recently became apparent that integrated operating rooms can improve the quality of care, simplify clinical workflows, and mitigate equipment-related incidents and human errors. Particularly using computer assistance based on data from integrated surgical devices is a promising opportunity. However, the lack of manufacturer-independent interoperability often prevents the deployment of collaborative assistive systems. The German flagship project OR.NET has therefore developed, implemented, validated, and standardized concepts for open medical device interoperability. This paper describes the universal OR.NET interoperability concept enabling a safe and dynamic manufacturer-independent interconnection of point-of-care (PoC) medical devices in the operating room and the whole clinic. It is based on a protocol specifically addressing the requirements of device-to-device communication, yet also provides solutions for connecting the clinical information technology (IT) infrastructure. We present the concept of a service-oriented medical device architecture (SOMDA) as well as an introduction to the technical specification implementing the SOMDA paradigm, currently being standardized within the IEEE 11073 service-oriented device connectivity (SDC) series. In addition, the Session concept is introduced as a key enabler for safe device interconnection in highly dynamic ensembles of networked medical devices; and finally, some security aspects of a SOMDA are discussed.

Interoperability for Entreprise Systems and Applications '12

CERN Document Server

Doumeingts, Guy; Katzy, Bernhard; Chalmeta, Ricardo

2012-01-01

Within a scenario of globalised markets, where the capacity to efficiently cooperate with other firms starts to become essential in order to remain in the market in an economically, socially and environmentally cost-effective manner, it can be seen how the most innovative enterprises are beginning to redesign their business model to become interoperable. This goal of interoperability is essential, not only from the perspective of the individual enterprise but also in the new business structures that are now emerging, such as supply chains, virtual enterprises, interconnected organisations or extended enterprises, as well as in mergers and acquisitions. Composed of over 40 papers, Enterprise Interoperability V ranges from academic research through case studies to industrial and administrative experience of interoperability. The international nature of the authorship contnues to broaden. Many of the papers have examples and illustrations calculated to deepen understanding and generate new ideas. The I-ESA'12 Co...

Securing the smart grid information exchange

Energy Technology Data Exchange (ETDEWEB)

Fries, Steffen; Falk, Rainer [Siemens AG, Corporate Technology, Muenchen (Germany)

2012-07-01

The smart grid is based on information exchange between various stakeholders using open communication technologies, to control the physical electric grid through the information grid. Protection against cyber attacks is essential to ensure a reliable operation of the smart grid. This challenge is addressed by various regulatory, standardization, and research activities. After giving an overview of the security demand of a smart grid, existing and appearing standardization activities are described. (orig.)

Assessment of Collaboration and Interoperability in an Information Management System to Support Bioscience Research

Science.gov (United States)

Myneni, Sahiti; Patel, Vimla L.

2009-01-01

Biomedical researchers often have to work on massive, detailed, and heterogeneous datasets that raise new challenges of information management. This study reports an investigation into the nature of the problems faced by the researchers in two bioscience test laboratories when dealing with their data management applications. Data were collected using ethnographic observations, questionnaires, and semi-structured interviews. The major problems identified in working with these systems were related to data organization, publications, and collaboration. The interoperability standards were analyzed using a C4I framework at the level of connection, communication, consolidation, and collaboration. Such an analysis was found to be useful in judging the capabilities of data management systems at different levels of technological competency. While collaboration and system interoperability are the “must have” attributes of these biomedical scientific laboratory information management applications, usability and human interoperability are the other design concerns that must also be addressed for easy use and implementation. PMID:20351900

A Service Oriented Architecture Approach to Achieve Interoperability between Immunization Information Systems in Iran.

Science.gov (United States)

Hosseini, Masoud; Ahmadi, Maryam; Dixon, Brian E

2014-01-01

Clinical decision support (CDS) systems can support vaccine forecasting and immunization reminders; however, immunization decision-making requires data from fragmented, independent systems. Interoperability and accurate data exchange between immunization information systems (IIS) is an essential factor to utilize Immunization CDS systems. Service oriented architecture (SOA) and Health Level 7 (HL7) are dominant standards for web-based exchange of clinical information. We implemented a system based on SOA and HL7 v3 to support immunization CDS in Iran. We evaluated system performance by exchanging 1500 immunization records for roughly 400 infants between two IISs. System turnaround time is less than a minute for synchronous operation calls and the retrieved immunization history of infants were always identical in different systems. CDS generated reports were accordant to immunization guidelines and the calculations for next visit times were accurate. Interoperability is rare or nonexistent between IIS. Since inter-state data exchange is rare in United States, this approach could be a good prototype to achieve interoperability of immunization information.

Interoperability of Web Archives and Digital Libraries

DEFF Research Database (Denmark)

Kalb, Hendrik; Lazaridou, Paraskevi; Pinsent, Edward

2013-01-01

The interoperability of web archives and digital libraries is crucial to avoid silos of preserved data and content. While various researches focus on specfic facets of the challenge to interoperate, there is a lack of empirical work about the overall situation of actual challenges. We conduct...

Modelling noise propagation using Grid Resources. Progress within GDI-Grid

Science.gov (United States)

Kiehle, Christian; Mayer, Christian; Padberg, Alexander; Stapelfeld, Hartmut

2010-05-01

Modelling noise propagation using Grid Resources. Progress within GDI-Grid. GDI-Grid (english: SDI-Grid) is a research project funded by the German Ministry for Science and Education (BMBF). It aims at bridging the gaps between OGC Web Services (OWS) and Grid infrastructures and identifying the potential of utilizing the superior storage capacities and computational power of grid infrastructures for geospatial applications while keeping the well-known service interfaces specified by the OGC. The project considers all major OGC webservice interfaces for Web Mapping (WMS), Feature access (Web Feature Service), Coverage access (Web Coverage Service) and processing (Web Processing Service). The major challenge within GDI-Grid is the harmonization of diverging standards as defined by standardization bodies for Grid computing and spatial information exchange. The project started in 2007 and will continue until June 2010. The concept for the gridification of OWS developed by lat/lon GmbH and the Department of Geography of the University of Bonn is applied to three real-world scenarios in order to check its practicability: a flood simulation, a scenario for emergency routing and a noise propagation simulation. The latter scenario is addressed by the Stapelfeldt Ingenieurgesellschaft mbH located in Dortmund adapting their LimA software to utilize grid resources. Noise mapping of e.g. traffic noise in urban agglomerates and along major trunk roads is a reoccurring demand of the EU Noise Directive. Input data requires road net and traffic, terrain, buildings and noise protection screens as well as population distribution. Noise impact levels are generally calculated in 10 m grid and along relevant building facades. For each receiver position sources within a typical range of 2000 m are split down into small segments, depending on local geometry. For each of the segments propagation analysis includes diffraction effects caused by all obstacles on the path of sound propagation

Special Topic Interoperability and EHR: Combining openEHR, SNOMED, IHE, and Continua as approaches to interoperability on national eHealth.

Science.gov (United States)

Beštek, Mate; Stanimirović, Dalibor

2017-08-09

The main aims of the paper comprise the characterization and examination of the potential approaches regarding interoperability. This includes openEHR, SNOMED, IHE, and Continua as combined interoperability approaches, possibilities for their incorporation into the eHealth environment, and identification of the main success factors in the field, which are necessary for achieving required interoperability, and consequently, for the successful implementation of eHealth projects in general. The paper represents an in-depth analysis regarding the potential application of openEHR, SNOMED, IHE and Continua approaches in the development and implementation process of eHealth in Slovenia. The research method used is both exploratory and deductive in nature. The methodological framework is grounded on information retrieval with a special focus on research and charting of existing experience in the field, and sources, both electronic and written, which include interoperability concepts and related implementation issues. The paper will try to answer the following inquiries that are complementing each other: 1. Scrutiny of the potential approaches, which could alleviate the pertinent interoperability issues in the Slovenian eHealth context. 2. Analyzing the possibilities (requirements) for their inclusion in the construction process for individual eHealth solutions. 3. Identification and charting the main success factors in the interoperability field that critically influence development and implementation of eHealth projects in an efficient manner. Provided insights and identified success factors could serve as a constituent of the strategic starting points for continuous integration of interoperability principles into the healthcare domain. Moreover, the general implementation of the identified success factors could facilitate better penetration of ICT into the healthcare environment and enable the eHealth-based transformation of the health system especially in the countries

An EarthCube Roadmap for Cross-Domain Interoperability in the Geosciences: Governance Aspects

Science.gov (United States)

Zaslavsky, I.; Couch, A.; Richard, S. M.; Valentine, D. W.; Stocks, K.; Murphy, P.; Lehnert, K. A.

2012-12-01

The goal of cross-domain interoperability is to enable reuse of data and models outside the original context in which these data and models are collected and used and to facilitate analysis and modeling of physical processes that are not confined to disciplinary or jurisdictional boundaries. A new research initiative of the U.S. National Science Foundation, called EarthCube, is developing a roadmap to address challenges of interoperability in the earth sciences and create a blueprint for community-guided cyberinfrastructure accessible to a broad range of geoscience researchers and students. Infrastructure readiness for cross-domain interoperability encompasses the capabilities that need to be in place for such secondary or derivative-use of information to be both scientifically sound and technically feasible. In this initial assessment we consider the following four basic infrastructure components that need to be present to enable cross-domain interoperability in the geosciences: metadata catalogs (at the appropriate community defined granularity) that provide standard discovery services over datasets, data access services, models and other resources of the domain; vocabularies that support unambiguous interpretation of domain resources and metadata; services used to access data repositories and other resources including models, visualizations and workflows; and formal information models that define structure and semantics of the information returned on service requests. General standards for these components have been proposed; they form the backbone of large scale integration activities in the geosciences. By utilizing these standards, EarthCube research designs can take advantage of data discovery across disciplines using the commonality in key data characteristics related to shared models of spatial features, time measurements, and observations. Data can be discovered via federated catalogs and linked nomenclatures from neighboring domains, while standard data

Interoperable web applications for sharing data and products of the International DORIS Service

Science.gov (United States)

Soudarin, L.; Ferrage, P.

2017-12-01

The International DORIS Service (IDS) was created in 2003 under the umbrella of the International Association of Geodesy (IAG) to foster scientific research related to the French satellite tracking system DORIS and to deliver scientific products, mostly related to the International Earth rotation and Reference systems Service (IERS). Since its start, the organization has continuously evolved, leading to additional and improved operational products from an expanded set of DORIS Analysis Centers. In addition, IDS has developed services for sharing data and products with the users. Metadata and interoperable web applications are proposed to explore, visualize and download the key products such as the position time series of the geodetic points materialized at the ground tracking stations. The Global Geodetic Observing System (GGOS) encourages the IAG Services to develop such interoperable facilities on their website. The objective for GGOS is to set up an interoperable portal through which the data and products produced by the IAG Services can be served to the user community. We present the web applications proposed by IDS to visualize time series of geodetic observables or to get information about the tracking ground stations and the tracked satellites. We discuss the future plans for IDS to meet the recommendations of GGOS. The presentation also addresses the needs for the IAG Services to adopt common metadata thesaurus to describe data and products, and interoperability standards to share them.

Automated tools and techniques for distributed Grid Software Development of the testbed infrastructure

CERN Document Server

Aguado Sanchez, C

2007-01-01

Grid technology is becoming more and more important as the new paradigm for sharing computational resources across different organizations in a secure way. The great powerfulness of this solution, requires the definition of a generic stack of services and protocols and this is the scope of the different Grid initiatives. As a result of international collaborations for its development, the Open Grid Forum created the Open Grid Services Architecture (OGSA) which aims to define the common set of services that will enable interoperability across the different implementations. This master thesis has been developed in this framework, as part of the two European-funded projects ETICS and OMII-Europe. The main objective is to contribute to the design and maintenance of large distributed development projects with the automated tool that enables to implement Software Engineering techniques oriented to achieve an acceptable level of quality at the release process. Specifically, this thesis develops the testbed concept a...

ISAIA: Interoperable Systems for Archival Information Access

Science.gov (United States)

Hanisch, Robert J.

2002-01-01

The ISAIA project was originally proposed in 1999 as a successor to the informal AstroBrowse project. AstroBrowse, which provided a data location service for astronomical archives and catalogs, was a first step toward data system integration and interoperability. The goals of ISAIA were ambitious: '...To develop an interdisciplinary data location and integration service for space science. Building upon existing data services and communications protocols, this service will allow users to transparently query hundreds or thousands of WWW-based resources (catalogs, data, computational resources, bibliographic references, etc.) from a single interface. The service will collect responses from various resources and integrate them in a seamless fashion for display and manipulation by the user.' Funding was approved only for a one-year pilot study, a decision that in retrospect was wise given the rapid changes in information technology in the past few years and the emergence of the Virtual Observatory initiatives in the US and worldwide. Indeed, the ISAIA pilot study was influential in shaping the science goals, system design, metadata standards, and technology choices for the virtual observatory. The ISAIA pilot project also helped to cement working relationships among the NASA data centers, US ground-based observatories, and international data centers. The ISAIA project was formed as a collaborative effort between thirteen institutions that provided data to astronomers, space physicists, and planetary scientists. Among the fruits we ultimately hoped would come from this project would be a central site on the Web that any space scientist could use to efficiently locate existing data relevant to a particular scientific question. Furthermore, we hoped that the needed technology would be general enough to allow smaller, more-focused community within space science could use the same technologies and standards to provide more specialized services. A major challenge to searching

Flexible solution for interoperable cloud healthcare systems.

Science.gov (United States)

Vida, Mihaela Marcella; Lupşe, Oana Sorina; Stoicu-Tivadar, Lăcrămioara; Bernad, Elena

2012-01-01

It is extremely important for the healthcare domain to have a standardized communication because will improve the quality of information and in the end the resulting benefits will improve the quality of patients' life. The standards proposed to be used are: HL7 CDA and CCD. For a better access to the medical data a solution based on cloud computing (CC) is investigated. CC is a technology that supports flexibility, seamless care, and reduced costs of the medical act. To ensure interoperability between healthcare information systems a solution creating a Web Custom Control is presented. The control shows the database tables and fields used to configure the two standards. This control will facilitate the work of the medical staff and hospital administrators, because they can configure the local system easily and prepare it for communication with other systems. The resulted information will have a higher quality and will provide knowledge that will support better patient management and diagnosis.

Privacy Enforcement in a Cost-Effective Smart Grid

DEFF Research Database (Denmark)

Mikkelsen, Søren Aagaard

In this technical report we present the current state of the research conducted during the first part of the PhD period. The PhD thesis “Privacy Enforcement in a Cost-Effective Smart Grid” focuses on ensuring privacy when generating market for energy service providers that develop web services...... for the residential domain in the envisaged smart grid. The PhD project is funded and associated to the EU project “Energy Demand Aware Open Services for Smart Grid Intelligent Automation” (Smart HG) and therefore introduces the project on a system-level. Based on this, we present some of the integration, security...... and privacy challenges that emerge when designing a system architecture and infrastructure. The resulting architecture is a consumer-centric and agent-based design and uses open Internet-based communication protocols for enabling interoperability while being cost-effective. Finally, the PhD report present...

Defining inter-cloud architecture for interoperability and integration

NARCIS (Netherlands)

Demchenko, Y.; Ngo, C.; Makkes, M.X.; Strijkers, R.; de Laat, C.; Zimmermann, W.; Lee, Y.W.; Demchenko, Y.

2012-01-01

This paper presents an on-going research to develop the Inter-Cloud Architecture, which addresses the architectural problems in multi-provider multi-domain heterogeneous cloud based applications integration and interoperability, including integration and interoperability with legacy infrastructure

Defining Inter-Cloud Architecture for Interoperability and Integration

NARCIS (Netherlands)

Demchenko, Y.; Ngo, C.; Makkes, M.X.; Strijkers, R.J.; Laat, C. de

2012-01-01

This paper presents on-going research to develop the Inter-Cloud Architecture that should address problems in multi-provider multi-domain heterogeneous Cloud based applications integration and interoperability, including integration and interoperability with legacy infrastructure services. Cloud

Porting of Scientific Applications to Grid Computing on GridWay

Directory of Open Access Journals (Sweden)

J. Herrera

2005-01-01

Full Text Available The expansion and adoption of Grid technologies is prevented by the lack of a standard programming paradigm to port existing applications among different environments. The Distributed Resource Management Application API has been proposed to aid the rapid development and distribution of these applications across different Distributed Resource Management Systems. In this paper we describe an implementation of the DRMAA standard on a Globus-based testbed, and show its suitability to express typical scientific applications, like High-Throughput and Master-Worker applications. The DRMAA routines are supported by the functionality offered by the GridWay2 framework, which provides the runtime mechanisms needed for transparently executing jobs on a dynamic Grid environment based on Globus. As cases of study, we consider the implementation with DRMAA of a bioinformatics application, a genetic algorithm and the NAS Grid Benchmarks.

Smart grid and smart building inter-operation using agent-based particle swarm optimization

NARCIS (Netherlands)

Hurtado Munoz, L.A.; Nguyen, P.H.; Kling, W.L.

2015-01-01

Future power systems require a change from a "vertical" to a "horizontal" structure, in which the customer plays a central role. As buildings represent a substantial aggregation of energy consumption, the intertwined operation of the future power grid and the built environment is crucial to achieve

Robotics Systems Joint Project Office (RSJPO) Interoperability Profiles (IOPS) 101

Science.gov (United States)

2012-07-01

interoperability, although they are supported by some interoperability attributes  For example, stair climbing » Stair climbing is not something that...IOPs need to specify » However, the mobility & actuation related interoperable messages can be used to provide stair climbing » Also...interoperability can enable management of different poses or modes, one of which may be stair climbing R O B O T IC S Y S T E M S J P O L e a d e r s h i p

Investigation of Automated Terminal Interoperability Test

OpenAIRE

Brammer, Niklas

2008-01-01

In order to develop and secure the functionality of its cellular communications systems, Ericsson deals with numerous R&D and I&V activities. One important aspect is interoperability with mobile terminals from different vendors on the world market. Therefore Ericsson co-operates with mobile platform and user equipment manufacturers. These companies visit the interoperability developmental testing (IoDT) laboratories in Linköping to test their developmental products and prototypes in o...

Cloud Computing and Smart Grids

Directory of Open Access Journals (Sweden)

Janina POPEANGĂ

2012-10-01

Full Text Available Increasing concern about energy consumption is leading to infrastructure that supports real-time, two-way communication between utilities and consumers, and allows software systems at both ends to control and manage power use. To manage communications to millions of endpoints in a secure, scalable and highly-available environment and to achieve these twin goals of ‘energy conservation’ and ‘demand response’, utilities must extend the same communication network management processes and tools used in the data center to the field.This paper proposes that cloud computing technology, because of its low cost, flexible and redundant architecture and fast response time, has the functionality needed to provide the security, interoperability and performance required for large-scale smart grid applications.

Toward an Interoperability Architecture

National Research Council Canada - National Science Library

Buddenberg, Rex

2001-01-01

.... The continued burgeoning of the Internet constitutes an existence proof. But a common networking base is insufficient to reach a goal of cross-system interoperability - the large information system...

Language interoperability for high-performance parallel scientific components

International Nuclear Information System (INIS)

Elliot, N; Kohn, S; Smolinski, B

1999-01-01

With the increasing complexity and interdisciplinary nature of scientific applications, code reuse is becoming increasingly important in scientific computing. One method for facilitating code reuse is the use of components technologies, which have been used widely in industry. However, components have only recently worked their way into scientific computing. Language interoperability is an important underlying technology for these component architectures. In this paper, we present an approach to language interoperability for a high-performance parallel, component architecture being developed by the Common Component Architecture (CCA) group. Our approach is based on Interface Definition Language (IDL) techniques. We have developed a Scientific Interface Definition Language (SIDL), as well as bindings to C and Fortran. We have also developed a SIDL compiler and run-time library support for reference counting, reflection, object management, and exception handling (Babel). Results from using Babel to call a standard numerical solver library (written in C) from C and Fortran show that the cost of using Babel is minimal, where as the savings in development time and the benefits of object-oriented development support for C and Fortran far outweigh the costs

Cross border semantic interoperability for clinical research: the EHR4CR semantic resources and services

Science.gov (United States)

Daniel, Christel; Ouagne, David; Sadou, Eric; Forsberg, Kerstin; Gilchrist, Mark Mc; Zapletal, Eric; Paris, Nicolas; Hussain, Sajjad; Jaulent, Marie-Christine; MD, Dipka Kalra

2016-01-01

With the development of platforms enabling the use of routinely collected clinical data in the context of international clinical research, scalable solutions for cross border semantic interoperability need to be developed. Within the context of the IMI EHR4CR project, we first defined the requirements and evaluation criteria of the EHR4CR semantic interoperability platform and then developed the semantic resources and supportive services and tooling to assist hospital sites in standardizing their data for allowing the execution of the project use cases. The experience gained from the evaluation of the EHR4CR platform accessing to semantically equivalent data elements across 11 European participating EHR systems from 5 countries demonstrated how far the mediation model and mapping efforts met the expected requirements of the project. Developers of semantic interoperability platforms are beginning to address a core set of requirements in order to reach the goal of developing cross border semantic integration of data. PMID:27570649

Interactive test tool for interoperable C-ITS development

NARCIS (Netherlands)

Voronov, A.; Englund, C.; Bengtsson, H.H.; Chen, L.; Ploeg, J.; Jongh, J.F.C.M. de; Sluis, H.J.D. van de

2015-01-01

This paper presents the architecture of an Interactive Test Tool (ITT) for interoperability testing of Cooperative Intelligent Transport Systems (C-ITS). Cooperative systems are developed by different manufacturers at different locations, which makes interoperability testing a tedious task. Up until

Smart grid security

CERN Document Server

Goel, Sanjay; Papakonstantinou, Vagelis; Kloza, Dariusz

2015-01-01

This book on smart grid security is meant for a broad audience from managers to technical experts. It highlights security challenges that are faced in the smart grid as we widely deploy it across the landscape. It starts with a brief overview of the smart grid and then discusses some of the reported attacks on the grid. It covers network threats, cyber physical threats, smart metering threats, as well as privacy issues in the smart grid. Along with the threats the book discusses the means to improve smart grid security and the standards that are emerging in the field. The second part of the b

Modeling Interoperable Information Systems with 3LGM² and IHE.

Science.gov (United States)

Stäubert, S; Schaaf, M; Jahn, F; Brandner, R; Winter, A

2015-01-01

Strategic planning of information systems (IS) in healthcare requires descriptions of the current and the future IS state. Enterprise architecture planning (EAP) tools like the 3LGM² tool help to build up and to analyze IS models. A model of the planned architecture can be derived from an analysis of current state IS models. Building an interoperable IS, i. e. an IS consisting of interoperable components, can be considered a relevant strategic information management goal for many IS in healthcare. Integrating the healthcare enterprise (IHE) is an initiative which targets interoperability by using established standards. To link IHE concepts to 3LGM² concepts within the 3LGM² tool. To describe how an information manager can be supported in handling the complex IHE world and planning interoperable IS using 3LGM² models. To describe how developers or maintainers of IHE profiles can be supported by the representation of IHE concepts in 3LGM². Conceptualization and concept mapping methods are used to assign IHE concepts such as domains, integration profiles actors and transactions to the concepts of the three-layer graph-based meta-model (3LGM²). IHE concepts were successfully linked to 3LGM² concepts. An IHE-master-model, i. e. an abstract model for IHE concepts, was modeled with the help of 3LGM² tool. Two IHE domains were modeled in detail (ITI, QRPH). We describe two use cases for the representation of IHE concepts and IHE domains as 3LGM² models. Information managers can use the IHE-master-model as reference model for modeling interoperable IS based on IHE profiles during EAP activities. IHE developers are supported in analyzing consistency of IHE concepts with the help of the IHE-master-model and functions of the 3LGM² tool The complex relations between IHE concepts can be modeled by using the EAP method 3LGM². 3LGM² tool offers visualization and analysis features which are now available for the IHE-master-model. Thus information managers and IHE

Interoperating AliEn and ARC for a Distributed Tier1 in the Nordic Countries

CERN Document Server

Gros, Philippe; Lindemann, Jonas; Saiz, Pablo; Zarochentsev, Andrey

2011-01-01

To reach its large computing needs, the ALICE experiment at CERN has developed its own middleware called AliEn, centralised and relying on pilot jobs. One of its strength is the automatic installation of the required packages. The Nordic countries have offered a distributed Tier-1 centre for the CERN experiments, where the job management should be done with the NorduGrid middleware ARC. We have developed an interoperation module to allow to unify several computing sites using ARC, and make them look like a single site from the point of view of AliEn. A prototype has been completed and tested out of production. This talk will present implementation details of the system and its performance in tests.

Telemedicine system interoperability architecture: concept description and architecture overview.

Energy Technology Data Exchange (ETDEWEB)

Craft, Richard Layne, II

2004-05-01

In order for telemedicine to realize the vision of anywhere, anytime access to care, it must address the question of how to create a fully interoperable infrastructure. This paper describes the reasons for pursuing interoperability, outlines operational requirements that any interoperability approach needs to consider, proposes an abstract architecture for meeting these needs, identifies candidate technologies that might be used for rendering this architecture, and suggests a path forward that the telemedicine community might follow.

Evaluating the Organizational Interoperability Maturity Level in ICT Research Center

Directory of Open Access Journals (Sweden)

Manijeh Haghighinasab

2011-03-01

Full Text Available Interoperability refers to the ability to provide services and to accept services from other systems or devices. Collaborative enterprises face additional challenges to interoperate seamlessly within a networked organization. The major task here is to assess the maturity level of interoperating organizations. For this purpose the maturity models for enterprise were reviewed based on vendors’ reliability and advantages versus disadvantages. Interoperability maturity model was deduced from ATHENA project as European Integrated Project in 2005, this model named as EIMM was examined in Iran information and Communication Institute as a leading Telecommunication organization. 115 questionnaires were distributed between staff of 4 departments: Information Technology, Communication Technology, Security and Strategic studies regarding six areas of concern: Enterprise Modeling, Business Strategy Process, Organization and Competences, Products and Services, Systems and Technology, Legal Environment, Security and Trust at five maturity levels: Performed, Modeled , Integrated, Interoperable and Optimizing maturity. The findings showed different levels of maturity in this Institute. To achieve Interoperability level, appropriate practices are proposed for promotion to the higher levels.

Semantic Interoperability in Czech Healthcare Environment Supported by HL7 Version 3

Czech Academy of Sciences Publication Activity Database

Nagy, Miroslav; Hanzlíček, Petr; Přečková, Petra; Říha, Antonín; Dioszegi, Matěj; Seidl, Libor; Zvárová, Jana

2010-01-01

Roč. 49, č. 2 (2010), s. 186-195 ISSN 0026-1270 R&D Projects: GA MŠk(CZ) 1M06014; GA AV ČR 1ET200300413 Institutional research plan: CEZ:AV0Z10300504 Keywords : information storage and retrieval * electronic health record * HL7 * semantic interoperability * communication standards Subject RIV: IN - Informatics, Computer Science Impact factor: 1.472, year: 2010

Exploring interoperability: The advancements and challenges of improving data discovery, access, and visualization of scientific data through the NOAA Earth Information System (NEIS). (Invited)

Science.gov (United States)

Stewart, J.; Lynge, J.; Hackathorn, E.; MacDermaid, C.; Pierce, R.; Smith, J.

2013-12-01

Interoperability is a complex subject and often leads to different definitions in different environments. An interoperable framework of web services can improve the user experience by providing an interface for interaction with data regardless of it's format or physical location. This in itself improves accessibility to data, fosters data exploration and use, and provides a framework for new tools and applications. With an interoperable system you have: -- Data ready for action. Services model facilitates agile response to events. Services can be combined or reused quickly, upgraded or modified independently. -- Any data available through an interoperable framework can be operated on or combined with other data. Integrating standardized formats and access. -- New and existing systems have access to wide variety of data. Any new data added is easily incorporated with minimal changes required. The possibilities are limitless. The NOAA Earth Information System (NEIS) at the Earth System Research Laboratory (ESRL) is continuing research into an interoperable framework of layered services designed to facilitate the discovery, access, integration, visualization, and understanding of all NOAA (past, present, and future) data. An underlying philosophy of NEIS is to take advantage of existing off-the-shelf technologies and standards to minimize development of custom code allowing everyone to take advantage of the framework to meet these goals above. This framework, while built by NOAA are not limited to NOAA data or applications. Any other data available through similar services or applications that understand these standards can work interchangeably. Two major challenges are under active research at ESRL are data discoverability and fast access to big data. This presentation will provide an update on development of NEIS, including these challenges, the findings, and recommendations on what is needed for an interoperable system, as well as ongoing research activities

Smart EV Energy Management System to Support Grid Services

Science.gov (United States)

Wang, Bin

not consider a variety of practical concerns of implementing such a smart EV energy management system, including the driver preferences, communication protocols, data models, and customized integration of existing standards to provide grid services. Therefore, this dissertation also solves these issues by designing and implementing a scalable system architecture to capture the user preferences, enable multi-layer communication and control, and finally improve the system reliability and interoperability.

A web services choreography scenario for interoperating bioinformatics applications

Directory of Open Access Journals (Sweden)

Cheung David W

2004-03-01

Full Text Available Abstract Background Very often genome-wide data analysis requires the interoperation of multiple databases and analytic tools. A large number of genome databases and bioinformatics applications are available through the web, but it is difficult to automate interoperation because: 1 the platforms on which the applications run are heterogeneous, 2 their web interface is not machine-friendly, 3 they use a non-standard format for data input and output, 4 they do not exploit standards to define application interface and message exchange, and 5 existing protocols for remote messaging are often not firewall-friendly. To overcome these issues, web services have emerged as a standard XML-based model for message exchange between heterogeneous applications. Web services engines have been developed to manage the configuration and execution of a web services workflow. Results To demonstrate the benefit of using web services over traditional web interfaces, we compare the two implementations of HAPI, a gene expression analysis utility developed by the University of California San Diego (UCSD that allows visual characterization of groups or clusters of genes based on the biomedical literature. This utility takes a set of microarray spot IDs as input and outputs a hierarchy of MeSH Keywords that correlates to the input and is grouped by Medical Subject Heading (MeSH category. While the HTML output is easy for humans to visualize, it is difficult for computer applications to interpret semantically. To facilitate the capability of machine processing, we have created a workflow of three web services that replicates the HAPI functionality. These web services use document-style messages, which means that messages are encoded in an XML-based format. We compared three approaches to the implementation of an XML-based workflow: a hard coded Java application, Collaxa BPEL Server and Taverna Workbench. The Java program functions as a web services engine and interoperates

An Offload NIC for NASA, NLR, and Grid Computing

Science.gov (United States)

Awrach, James

2013-01-01

, and to add several more capabilities while reducing space consumption and cost. Provisions were designed for interoperability with systems used in the NASA HEC (High-End Computing) program. The new acceleration engine consists of state-ofthe- art FPGA (field-programmable gate array) core IP, C, and Verilog code; novel communication protocol; and extensions to the Globus structure. The engine provides the functions of network acceleration, encryption, compression, packet-ordering, and security added to Globus grid or for cloud data transfer. This system is scalable in nX10-Gbps increments through 100-Gbps f-d. It can be interfaced to industry-standard system-side or network-side devices or core IP in increments of 10 GigE, scaling to provide IEEE 40/100 GigE compliance.

Promoting Interoperability: The Case for Discipline-Specific PSAPS

Science.gov (United States)

2014-12-01

multijurisdictional, interoperability is a key factor for success. Responses to 9/11,9 the Oso mudslides in Washington, the Boston Marathon bombing...Continuum125 2. Functional Interoperability As demonstrated by the 9/11 attacks, the Oso mudslide in Washington, the Boston Marathon bombing, and other large

FHIR Healthcare Directories: Adopting Shared Interfaces to Achieve Interoperable Medical Device Data Integration.

Science.gov (United States)

Tyndall, Timothy; Tyndall, Ayami

2018-01-01

Healthcare directories are vital for interoperability among healthcare providers, researchers and patients. Past efforts at directory services have not provided the tools to allow integration of the diverse data sources. Many are overly strict, incompatible with legacy databases, and do not provide Data Provenance. A more architecture-independent system is needed to enable secure, GDPR-compatible (8) service discovery across organizational boundaries. We review our development of a portable Data Provenance Toolkit supporting provenance within Health Information Exchange (HIE) systems. The Toolkit has been integrated with client software and successfully leveraged in clinical data integration. The Toolkit validates provenance stored in a Blockchain or Directory record and creates provenance signatures, providing standardized provenance that moves with the data. This healthcare directory suite implements discovery of healthcare data by HIE and EHR systems via FHIR. Shortcomings of past directory efforts include the ability to map complex datasets and enabling interoperability via exchange endpoint discovery. By delivering data without dictating how it is stored we improve exchange and facilitate discovery on a multi-national level through open source, fully interoperable tools. With the development of Data Provenance resources we enhance exchange and improve security and usability throughout the health data continuum.

Interoperable Access to NCAR Research Data Archive Collections

Science.gov (United States)

Schuster, D.; Ji, Z.; Worley, S. J.; Manross, K.

2014-12-01

The National Center for Atmospheric Research (NCAR) Research Data Archive (RDA) provides free access to 600+ observational and gridded dataset collections. The RDA is designed to support atmospheric and related sciences research, updated frequently where datasets have ongoing production, and serves data to 10,000 unique users annually. The traditional data access options include web-based direct archive file downloads, user selected data subsets and format conversions produced by server-side computations, and client and cURL-based APIs for routine scripted data retrieval. To enhance user experience and utility, the RDA now also offers THREDDS Data Server (TDS) access for many highly valued dataset collections. TDS offered datasets are presented as aggregations, enabling users to access an entire dataset collection, that can be comprised of 1000's of files, through a single virtual file. The OPeNDAP protocol, supported by the TDS, allows compatible tools to open and access these virtual files remotely, and make the native data file format transparent to the end user. The combined functionality (TDS/OPeNDAP) gives users the ability to browse, select, visualize, and download data from a complete dataset collection without having to transfer archive files to a local host. This presentation will review the TDS basics and describe the specific TDS implementation on the RDA's diverse archive of GRIB-1, GRIB-2, and gridded NetCDF formatted dataset collections. Potential future TDS implementation on in-situ observational dataset collections will be discussed. Illustrative sample cases will be used to highlight the end users benefits from this interoperable data access to the RDA.

EASE-Grid 2.0: Incremental but Significant Improvements for Earth-Gridded Data Sets

OpenAIRE

Brodzik, Mary J.; Billingsley, Brendan; Haran, Terry; Raup, Bruce; Savoie, Matthew H.

2012-01-01

Defined in the early 1990s for use with gridded satellite passive microwave data, the Equal-Area Scalable Earth Grid (EASE-Grid) was quickly adopted and used for distribution of a variety of satellite and in situ data sets. Conceptually easy to understand, EASE-Grid suffers from limitations that make it impossible to format in the widely popular GeoTIFF convention without reprojection. Importing EASE-Grid data into standard mapping software packages is nontrivial and error-prone. This article...

Online grid impedance estimation for single-phase grid-connected systems using PQ variations

DEFF Research Database (Denmark)

Ciobotaru, Mihai; Teodorescu, Remus; Rodriguez, Pedro

2007-01-01

algorithms are used in order to estimate the value of the grid impedance. The online grid impedance estimation method can be used for compliance with the anti-islanding standard requirements (IEEE1574, IEEE929 and VDE0126) and for adaptive control of the grid-connected converters. The proposed method...

Toward semantic interoperability with linked foundational ontologies in ROMULUS

CSIR Research Space (South Africa)

Khan, ZC

2013-06-01

Full Text Available A purpose of a foundational ontology is to solve interoperability issues among ontologies. Many foundational ontologies have been developed, reintroducing the ontology interoperability problem. We address this with the new online foundational...

EarthCube - Earth System Bridge: Spanning Scientific Communities with Interoperable Modeling Frameworks

Science.gov (United States)

Peckham, S. D.; DeLuca, C.; Gochis, D. J.; Arrigo, J.; Kelbert, A.; Choi, E.; Dunlap, R.

2014-12-01

In order to better understand and predict environmental hazards of weather/climate, ecology and deep earth processes, geoscientists develop and use physics-based computational models. These models are used widely both in academic and federal communities. Because of the large effort required to develop and test models, there is widespread interest in component-based modeling, which promotes model reuse and simplified coupling to tackle problems that often cross discipline boundaries. In component-based modeling, the goal is to make relatively small changes to models that make it easy to reuse them as "plug-and-play" components. Sophisticated modeling frameworks exist to rapidly couple these components to create new composite models. They allow component models to exchange variables while accommodating different programming languages, computational grids, time-stepping schemes, variable names and units. Modeling frameworks have arisen in many modeling communities. CSDMS (Community Surface Dynamics Modeling System) serves the academic earth surface process dynamics community, while ESMF (Earth System Modeling Framework) serves many federal Earth system modeling projects. Others exist in both the academic and federal domains and each satisfies design criteria that are determined by the community they serve. While they may use different interface standards or semantic mediation strategies, they share fundamental similarities. The purpose of the Earth System Bridge project is to develop mechanisms for interoperability between modeling frameworks, such as the ability to share a model or service component. This project has three main goals: (1) Develop a Framework Description Language (ES-FDL) that allows modeling frameworks to be described in a standard way so that their differences and similarities can be assessed. (2) Demonstrate that if a model is augmented with a framework-agnostic Basic Model Interface (BMI), then simple, universal adapters can go from BMI to a

A Web Service Protocol Realizing Interoperable Internet of Things Tasking Capability

Science.gov (United States)

Huang, Chih-Yuan; Wu, Cheng-Hung

2016-01-01

The Internet of Things (IoT) is an infrastructure that interconnects uniquely-identifiable devices using the Internet. By interconnecting everyday appliances, various monitoring, and physical mashup applications can be constructed to improve human’s daily life. In general, IoT devices provide two main capabilities: sensing and tasking capabilities. While the sensing capability is similar to the World-Wide Sensor Web, this research focuses on the tasking capability. However, currently, IoT devices created by different manufacturers follow different proprietary protocols and are locked in many closed ecosystems. This heterogeneity issue impedes the interconnection between IoT devices and damages the potential of the IoT. To address this issue, this research aims at proposing an interoperable solution called tasking capability description that allows users to control different IoT devices using a uniform web service interface. This paper demonstrates the contribution of the proposed solution by interconnecting different IoT devices for different applications. In addition, the proposed solution is integrated with the OGC SensorThings API standard, which is a Web service standard defined for the IoT sensing capability. Consequently, the Extended SensorThings API can realize both IoT sensing and tasking capabilities in an integrated and interoperable manner. PMID:27589759

A Web Service Protocol Realizing Interoperable Internet of Things Tasking Capability.

Science.gov (United States)

Huang, Chih-Yuan; Wu, Cheng-Hung

2016-08-31

The Internet of Things (IoT) is an infrastructure that interconnects uniquely-identifiable devices using the Internet. By interconnecting everyday appliances, various monitoring, and physical mashup applications can be constructed to improve human's daily life. In general, IoT devices provide two main capabilities: sensing and tasking capabilities. While the sensing capability is similar to the World-Wide Sensor Web, this research focuses on the tasking capability. However, currently, IoT devices created by different manufacturers follow different proprietary protocols and are locked in many closed ecosystems. This heterogeneity issue impedes the interconnection between IoT devices and damages the potential of the IoT. To address this issue, this research aims at proposing an interoperable solution called tasking capability description that allows users to control different IoT devices using a uniform web service interface. This paper demonstrates the contribution of the proposed solution by interconnecting different IoT devices for different applications. In addition, the proposed solution is integrated with the OGC SensorThings API standard, which is a Web service standard defined for the IoT sensing capability. Consequently, the Extended SensorThings API can realize both IoT sensing and tasking capabilities in an integrated and interoperable manner.

Interoperability of Demand Response Resources Demonstration in NY

Energy Technology Data Exchange (ETDEWEB)

Wellington, Andre

2014-03-31

The Interoperability of Demand Response Resources Demonstration in NY (Interoperability Project) was awarded to Con Edison in 2009. The objective of the project was to develop and demonstrate methodologies to enhance the ability of customer sited Demand Response resources to integrate more effectively with electric delivery companies and regional transmission organizations.

The Influence of Information Systems Interoperability on Economic Activity in Poland

Directory of Open Access Journals (Sweden)

Ganczar Małgorzata

2017-12-01

Full Text Available In the text, I discuss the abilities and challenges of information systems interoperability. The anticipated and expected result of interoperability is to improve the provision of public utility services to citizens and companies by means of facilitating the provision of public utility services on the basis of a “single window” principle and reducing the costs incurred by public administrations, companies, and citizens, resulting from the efficiency of the provision of public utility services. In the article, the conceptual framework of interoperability is elaborated upon. Moreover, information systems and public registers for entrepreneurs in Poland exemplify whether the interoperability may be applied and, if so, whether interoperability fulfils its targets to the extent of e-Government services for entrepreneurs.

Special topic interoperability and EHR: Combining openEHR, SNOMED, IHE, and continua as approaches to interoperability on national ehealth

DEFF Research Database (Denmark)

Bestek, M.; Stanimirovi, D.

2017-01-01

into the eHealth environment, and identification of the main success factors in the field, which are necessary for achieving required interoperability, and consequently, for the successful implementation of eHealth projects in general. Methods: The paper represents an in-depth analysis regarding...... the potential application of openEHR, SNOMED, IHE and Continua approaches in the development and implementation process of eHealth in Slovenia. The research method used is both exploratory and deductive in nature. The methodological framework is grounded on information retrieval with a special focus on research...... could alleviate the pertinent interoperability issues in the Slovenian eHealth context. 2. Analyzing the possibilities (requirements) for their inclusion in the construction process for individual eHealth solutions. 3. Identification and charting the main success factors in the interoperability field...

Coordinating the Global Information Grid Initiative with the NG9-1-1 Initiative

Energy Technology Data Exchange (ETDEWEB)

Michael Schmitt

2008-05-01

As the Department of Defense develops the Global Information Grid, the Department of Transportation develops the Next Generation 9-1-1 system. Close examinations of these initiatives show that the two are similar in architectures, applications, and communications interoperability. These similarities are extracted from the lowest user level to the highest commander rank that will be involved in each network. Once the similarities are brought into perspective, efforts should be made to collaborate between the two departments.

A Spectrum of Interoperability: The Site for Science Prototype for the NSDL; Re-Inventing the Wheel? Standards, Interoperability and Digital Cultural Content; Preservation Risk Management for Web Resources: Virtual Remote Control in Cornell's Project Prism; Safekeeping: A Cooperative Approach to Building a Digital Preservation Resource; Object Persistence and Availability in Digital Libraries; Illinois Digital Cultural Heritage Community-Collaborative Interactions among Libraries, Museums and Elementary Schools.

Science.gov (United States)

Arms, William Y.; Hillmann, Diane; Lagoze, Carl; Krafft, Dean; Marisa, Richard; Saylor, John; Terizzi, Carol; Van de Sompel, Herbert; Gill, Tony; Miller, Paul; Kenney, Anne R.; McGovern, Nancy Y.; Botticelli, Peter; Entlich, Richard; Payette, Sandra; Berthon, Hilary; Thomas, Susan; Webb, Colin; Nelson, Michael L.; Allen, B. Danette; Bennett, Nuala A.; Sandore, Beth; Pianfetti, Evangeline S.

2002-01-01

Discusses digital libraries, including interoperability, metadata, and international standards; Web resource preservation efforts at Cornell University; digital preservation at the National Library of Australia; object persistence and availability; collaboration among libraries, museums and elementary schools; Asian digital libraries; and a Web…

Achieving Interoperability Through Base Registries for Governmental Services and Document Management

Science.gov (United States)

Charalabidis, Yannis; Lampathaki, Fenareti; Askounis, Dimitris

As digital infrastructures increase their presence worldwide, following the efforts of governments to provide citizens and businesses with high-quality one-stop services, there is a growing need for the systematic management of those newly defined and constantly transforming processes and electronic documents. E-government Interoperability Frameworks usually cater to the technical standards of e-government systems interconnection, but do not address service composition and use by citizens, businesses, or other administrations.

Digital Motion Imagery, Interoperability Challenges for Space Operations

Science.gov (United States)

Grubbs, Rodney

2012-01-01

With advances in available bandwidth from spacecraft and between terrestrial control centers, digital motion imagery and video is becoming more practical as a data gathering tool for science and engineering, as well as for sharing missions with the public. The digital motion imagery and video industry has done a good job of creating standards for compression, distribution, and physical interfaces. Compressed data streams can easily be transmitted or distributed over radio frequency, internet protocol, and other data networks. All of these standards, however, can make sharing video between spacecraft and terrestrial control centers a frustrating and complicated task when different standards and protocols are used by different agencies. This paper will explore the challenges presented by the abundance of motion imagery and video standards, interfaces and protocols with suggestions for common formats that could simplify interoperability between spacecraft and ground support systems. Real-world examples from the International Space Station will be examined. The paper will also discuss recent trends in the development of new video compression algorithms, as well likely expanded use of Delay (or Disruption) Tolerant Networking nodes.

Secure Protocol and IP Core for Configuration of Networking Hardware IPs in the Smart Grid

Directory of Open Access Journals (Sweden)

Marcelo Urbina

2018-02-01

Full Text Available Nowadays, the incorporation and constant evolution of communication networks in the electricity sector have given rise to the so-called Smart Grid, which is why it is necessary to have devices that are capable of managing new communication protocols, guaranteeing the strict requirements of processing required by the electricity sector. In this context, intelligent electronic devices (IEDs with network architectures are currently available to meet the communication, real-time processing and interoperability requirements of the Smart Grid. The new generation IEDs include an Field Programmable Gate Array (FPGA, to support specialized networking switching architectures for the electric sector, as the IEEE 1588-aware High-availability Seamless Redundancy/Parallel Redundancy Protocol (HSR/PRP. Another advantage to using an FPGA is the ability to update or reconfigure the design to support new requirements that are being raised to the standards (IEC 61850. The update of the architecture implemented in the FPGA can be done remotely, but it is necessary to establish a cyber security mechanism since the communication link generates vulnerability in the case the attacker gains physical access to the network. The research presented in this paper proposes a secure protocol and Intellectual Property (IP core for configuring and monitoring the networking IPs implemented in a Field Programmable Gate Array (FPGA. The FPGA based implementation proposed overcomes this issue using a light Layer-2 protocol fully implemented on hardware and protected by strong cryptographic algorithms (AES-GCM, defined in the IEC 61850-90-5 standard. The proposed secure protocol and IP core are applicable in any field where remote configuration over Ethernet is required for IP cores in FPGAs. In this paper, the proposal is validated in communications hardware for Smart Grids.

Biodiversity Data Interoperability Issues: on the Opportunity of Exploiting O&M for Biotic Data Management

Science.gov (United States)

Oggioni, A.; Tagliolato, P.; Schleidt, K.; Carrara, P.; Grellet, S.; Sarretta, A.

2016-02-01

The state of the art in biodiversity data management unfortunately encompases a plethora of diverse data formats. Compared to other research fields, there is a lack in harmonization and standardization of these data. While data from traditional biodiversity collections (e.g. from museums) can be easily represented by existing standard as provided by TDWG, the growing number of field observations stemming from both VGI activities (e.g. iNaturalist) as well as from automated systems (e.g. animal biotelemetry) would at the very least require upgrades of current formats. Moreover, from an eco-informatics perspective, the integration and use of data from different scientific fields is the norm (abiotic data, geographic information, etc.); the possibility to represent this information and biodiversity data in a homogeneous way would be an advantage for interoperability, allowing for easy integration across environmental media. We will discuss the possibility to exploit the Open Geospatial Consortium/ISO standard, Observations and Measurements (O&M) [1], a generic conceptual model developed for observation data but with strong analogies with the biodiversity-oriented OBOE ontology [2]. The applicability of OGC O&M for the provision of biodiviersity occurence data has been suggested by the INSPIRE Cross Thematic Working Group on Observations & Measurements [3], Inspire Environmental Monitoring Facilities Thematic Working Group [4] and New Zealand Environmental Information Interoperability Framework [5]. This approach, in our opinion, could be an advantage for the biodiversity community. We will provide some examples for encoding biodiversity occurence data using the O&M standard in addition to highlighting the advatages offered by O&M in comparison to other representation formats. [1] Cox, S. (2013). Geographic information - Observations and measurements - OGC and ISO 19156. [2] Madin, J., Bowers, S., Schildhauer, M., Krivov, S., Pennington, D., & Villa, F. (2007). An

HP advances Grid Strategy for the adaptive enterprise

CERN Multimedia

2003-01-01

"HP today announced plans to further enable its enterprise infrastructure technologies for grid computing. By leveraging open grid standards, HP plans to help customers simplify the use and management of distributed IT resources. The initiative will integrate industry grid standards, including the Globus Toolkit and Open Grid Services Architecture (OGSA), across HP's enterprise product lines" (1 page).

Development of Extended Content Standards for Biodiversity Data

Science.gov (United States)

Hugo, Wim; Schmidt, Jochen; Saarenmaa, Hannu

2013-04-01

Interoperability in the field of Biodiversity observation has been strongly driven by the development of a number of global initiatives (GEO, GBIF, OGC, TDWG, GenBank, …) and its supporting standards (OGC-WxS, OGC-SOS, Darwin Core (DwC), NetCDF, …). To a large extent, these initiatives have focused on discoverability and standardization of syntactic and schematic interoperability. Semantic interoperability is more complex, requiring development of domain-dependent conceptual data models, and extension of these models with appropriate ontologies (typically manifested as controlled vocabularies). Biodiversity content has been standardized partly, for example through Darwin Core for occurrence data and associated taxonomy, and through Genbank for genetic data, but other contexts of biodiversity observation have lagged behind - making it difficult to achieve semantic interoperability between distributed data sources. With this in mind, WG8 of GEO BON (charged with data and systems interoperability) has started a work programme to address a number of concerns, one of which is the gap in content standards required to make Biodiversity data truly interoperable. The paper reports on the framework developed by WG8 for the classification of Biodiversity observation data into 'families' of use cases and its supporting data schema, where gaps, if any, in the availability if content standards have been identified, and how these are to be addressed by way of an abstract data model and the development of associated content standards. It is proposed that a minimum set of standards (1) will be required to address the scope of Biodiversity content, aligned with levels and dimensions of observation, and based on the 'Essential Biodiversity Variables' (2) being developed by GEO BON . The content standards are envisaged as loosely separated from the syntactic and schematic standards used for the base data exchange: typically, services would offer an existing data standard (DwC, WFS

European Interoperability Assets Register and Quality Framework Implementation.

Science.gov (United States)

Moreno-Conde, Alberto; Thienpont, Geert; Lamote, Inge; Coorevits, Pascal; Parra, Carlos; Kalra, Dipak

2016-01-01

Interoperability assets is the term applied to refer to any resource that can support the design, implementation and successful adoption of eHealth services that can exchange data meaningfully. Some examples may include functional requirements, specifications, standards, clinical models and term lists, guidance on how standards may be used concurrently, implementation guides, educational resources, and other resources. Unfortunately, these are largely accessible in ad hoc ways and result in scattered fragments of a solution space that urgently need to be brought together. At present, it is well known that new initiatives and projects will reinvent assets of which they were unaware, while those assets which were potentially of great value are forgotten, not maintained and eventually fall into disuse. This research has defined a quality in use model and assessed the suitability of this quality framework based on the feedback and opinion of a representative sample of potential end users. This quality framework covers the following domains of asset development and adoption: (i) Development process, (ii) Maturity level, (iii) Trustworthiness, (iv) Support & skills, (v) Sustainability, (vi) Semantic interoperability, (vii) Cost & effort of adoption (viii) Maintenance. When participants were requested to evaluate how the overall quality in use framework, 70% would recommend using the register to their colleagues, 70% felt that it could provide relevant benefits for discovering new assets, and 50% responded that it would support their decision making about the recommended asset to adopt or implement in their organisation. Several European projects have expressed interest in using the register, which will now be sustained and promoted by the the European Institute for Innovation through Health Data.

The Benefits and Future of Standards: Metadata and Beyond

Science.gov (United States)

Stracke, Christian M.

This article discusses the benefits and future of standards and presents the generic multi-dimensional Reference Model. First the importance and the tasks of interoperability as well as quality development and their relationship are analyzed. Especially in e-Learning their connection and interdependence is evident: Interoperability is one basic requirement for quality development. In this paper, it is shown how standards and specifications are supporting these crucial issues. The upcoming ISO metadata standard MLR (Metadata for Learning Resource) will be introduced and used as example for identifying the requirements and needs for future standardization. In conclusion a vision of the challenges and potentials for e-Learning standardization is outlined.

South African address standard and initiatives towards an international address standard

CSIR Research Space (South Africa)

Cooper, Antony K

2008-10-01

Full Text Available ; visiting friends; and providing a reference context for presenting other information. The benefits of an international address standards include: enabling address interoperability across boundaries; reducing service delivery costs; enabling development...

An Ontological Solution to Support Interoperability in the Textile Industry

Science.gov (United States)

Duque, Arantxa; Campos, Cristina; Jiménez-Ruiz, Ernesto; Chalmeta, Ricardo

Significant developments in information and communication technologies and challenging market conditions have forced enterprises to adapt their way of doing business. In this context, providing mechanisms to guarantee interoperability among heterogeneous organisations has become a critical issue. Even though prolific research has already been conducted in the area of enterprise interoperability, we have found that enterprises still struggle to introduce fully interoperable solutions, especially, in terms of the development and application of ontologies. Thus, the aim of this paper is to introduce basic ontology concepts in a simple manner and to explain the advantages of the use of ontologies to improve interoperability. We will also present a case study showing the implementation of an application ontology for an enterprise in the textile/clothing sector.

Interoperability of Information Systems Managed and Used by the Local Health Departments.

Science.gov (United States)

Shah, Gulzar H; Leider, Jonathon P; Luo, Huabin; Kaur, Ravneet

2016-01-01

In the post-Affordable Care Act era marked by interorganizational collaborations and availability of large amounts of electronic data from other community partners, it is imperative to assess the interoperability of information systems used by the local health departments (LHDs). To describe the level of interoperability of LHD information systems and identify factors associated with lack of interoperability. This mixed-methods research uses data from the 2015 Informatics Capacity and Needs Assessment Survey, with a target population of all LHDs in the United States. A representative sample of 650 LHDs was drawn using a stratified random sampling design. A total of 324 completed responses were received (50% response rate). Qualitative data were used from a key informant interview study of LHD informatics staff from across the United States. Qualitative data were independently coded by 2 researchers and analyzed thematically. Survey data were cleaned, bivariate comparisons were conducted, and a multivariable logistic regression was run to characterize factors associated with interoperability. For 30% of LHDs, no systems were interoperable, and 38% of LHD respondents indicated some of the systems were interoperable. Significant determinants of interoperability included LHDs having leadership support (adjusted odds ratio [AOR] = 3.54), control of information technology budget allocation (AOR = 2.48), control of data systems (AOR = 2.31), having a strategic plan for information systems (AOR = 1.92), and existence of business process analysis and redesign (AOR = 1.49). Interoperability of all systems may be an informatics goal, but only a small proportion of LHDs reported having interoperable systems, pointing to a substantial need among LHDs nationwide.

TIGER: Turbomachinery interactive grid generation

Science.gov (United States)

Soni, Bharat K.; Shih, Ming-Hsin; Janus, J. Mark

1992-01-01

A three dimensional, interactive grid generation code, TIGER, is being developed for analysis of flows around ducted or unducted propellers. TIGER is a customized grid generator that combines new technology with methods from general grid generation codes. The code generates multiple block, structured grids around multiple blade rows with a hub and shroud for either C grid or H grid topologies. The code is intended for use with a Euler/Navier-Stokes solver also being developed, but is general enough for use with other flow solvers. TIGER features a silicon graphics interactive graphics environment that displays a pop-up window, graphics window, and text window. The geometry is read as a discrete set of points with options for several industrial standard formats and NASA standard formats. Various splines are available for defining the surface geometries. Grid generation is done either interactively or through a batch mode operation using history files from a previously generated grid. The batch mode operation can be done either with a graphical display of the interactive session or with no graphics so that the code can be run on another computer system. Run time can be significantly reduced by running on a Cray-YMP.

Scientific Digital Libraries, Interoperability, and Ontologies

Science.gov (United States)

Hughes, J. Steven; Crichton, Daniel J.; Mattmann, Chris A.

2009-01-01

Scientific digital libraries serve complex and evolving research communities. Justifications for the development of scientific digital libraries include the desire to preserve science data and the promises of information interconnectedness, correlative science, and system interoperability. Shared ontologies are fundamental to fulfilling these promises. We present a tool framework, some informal principles, and several case studies where shared ontologies are used to guide the implementation of scientific digital libraries. The tool framework, based on an ontology modeling tool, was configured to develop, manage, and keep shared ontologies relevant within changing domains and to promote the interoperability, interconnectedness, and correlation desired by scientists.

ISO 18629 PSL : A Standardized Language for Specifying and Exchanging Process Information

Energy Technology Data Exchange (ETDEWEB)

Pouchard, Line Catherine [ORNL; Cutting-Decelle, A. F. [University of Loughborough, UK; Michel, Jean-Jacques [IDPICONSEIL; Gruninger, Michael [University of Toronto

2006-01-01

As enterprise integration increases, developers face increasingly complex problems related to interoperability. When enterprises collaborate, a common frame of reference or at least a common terminology is necessary for human-to-human, human-to-machine, and machine-to-machine communication. Ontology engineering offers a direction towards solving the inter-operability problems brought about by semantic obstacles related to the definitions of business terms and software classes. Ontology engineering is a set of tasks related to the development of ontologies for a particular domain. This paper is aimed at presenting the approach of ISO 18629, i.e., the Process Specification Language (PSL), to this problem. In the first part, the architecture of the standard is described, with the main features of the language. Then, the problems of the interoperability with PSL and the conformance to the standard are presented. The paper ends with an example showing the use of the standard for interoperability.

Quality model for semantic IS standards

NARCIS (Netherlands)

Folmer, Erwin Johan Albert

2011-01-01

Semantic IS (Information Systems) standards are essential for achieving interoperability between organizations. However a recent survey suggests that not the full benefits of standards are achieved, due to the quality issues. This paper presents a quality model for semantic IS standards, that should

Interoperability of Services in an Open Broadband Market : Cases from the Netherlands

NARCIS (Netherlands)

Burgmeijer, J.

2006-01-01

End-to-end interoperability of broadband services and networks is a condition for an open broadband market. A business model for broadband service interoperability is given. Two cases from the Netherlands, of initiatives from the market to reach interoperability, are presented: E-norm and FIST VoIP.

Interoperability

DEFF Research Database (Denmark)

Savin, Andrej

be limited. Fourth, Data protection “by design” would be distinguished from data protection “by default”. Fifth, new fundamental rights would be introduced and the old ones clarified. Sixth, new rules on controllers’ and processors’ duties, on supervisory authorities and on sanctions would be introduced....... Finally, the Commission would obtain significant new powers to adopt delegated acts. This appendix explores the impact that the proposed Regulation might have on interoperability of user-­‐generated services.4 Since the proposed Regulation is an instrument of high complexity, only those provisions...... of direct relevance for the project and Work Package 5 will be analysed here....

Smart grid security

Energy Technology Data Exchange (ETDEWEB)

Cuellar, Jorge (ed.) [Siemens AG, Muenchen (Germany). Corporate Technology

2013-11-01

The engineering, deployment and security of the future smart grid will be an enormous project requiring the consensus of many stakeholders with different views on the security and privacy requirements, not to mention methods and solutions. The fragmentation of research agendas and proposed approaches or solutions for securing the future smart grid becomes apparent observing the results from different projects, standards, committees, etc, in different countries. The different approaches and views of the papers in this collection also witness this fragmentation. This book contains the following papers: 1. IT Security Architecture Approaches for Smart Metering and Smart Grid. 2. Smart Grid Information Exchange - Securing the Smart Grid from the Ground. 3. A Tool Set for the Evaluation of Security and Reliability in Smart Grids. 4. A Holistic View of Security and Privacy Issues in Smart Grids. 5. Hardware Security for Device Authentication in the Smart Grid. 6. Maintaining Privacy in Data Rich Demand Response Applications. 7. Data Protection in a Cloud-Enabled Smart Grid. 8. Formal Analysis of a Privacy-Preserving Billing Protocol. 9. Privacy in Smart Metering Ecosystems. 10. Energy rate at home Leveraging ZigBee to Enable Smart Grid in Residential Environment.

47 CFR 90.548 - Interoperability Technical Standards.

Science.gov (United States)

2010-10-01

...—Digital Radio Technical Standards, approved April 15, 1998, Telecommunications Industry Association, ANSI... Standards, approved March 3, 2000, Telecommunications Industry Association, ANSI/TIA/EIA-102.BAEA-2000..., approved March 3, 2000, Telecommunications Industry Association, ANSI/TIA/EIA-102.BAEB-2000; Project 25...

Benefit quantification of interoperability in coordinate metrology

DEFF Research Database (Denmark)

Savio, E.; Carmignato, S.; De Chiffre, Leonardo

2014-01-01

these inefficiencies. The paper presents a methodology for an economic evaluation of interoperability benefits with respect to the verification of geometrical product specifications. It requires input data from testing and inspection activities, as well as information on training of personnel and licensing of software......One of the factors contributing to limited reproducibility of coordinate measurements is the use of different inspection software. Time-consuming efforts for translation of part programmes are sometimes needed, and interoperability of inspection equipment has the potential to reduce...

Applying Registry Services to Spaceflight Technologies to Aid in the Assignment of Assigned Numbers to Disparate Systems and their Technologies to Further Enable Interoperability

Science.gov (United States)

Bradford, Robert N.; Nichols, Kelvin F.; Witherspoon, Keith R.

2006-01-01

To date very little effort has been made to provide interoperability between various space agency projects. To effectively get to the Moon and beyond systems must interoperate. To provide interoperability, standardization and registries of various technologies will be required. These registries will be created as they relate to space flight. With the new NASA Moon/Mars initiative, a requirement to standardize and control the naming conventions of very disparate systems and technologies is emerging. The need to provide numbering to the many processes, schemas, vehicles, robots, space suits and technologies (e.g. versions), to name a few, in the highly complex Constellation initiative is imperative. The number of corporations, developer personnel, system interfaces, people interfaces will require standardization and registries on a scale not currently envisioned. It would only take one exception (stove piped system development) to weaken, if not, destroy interoperability. To start, a standardized registry process must be defined that allows many differing engineers, organizations and operators the ability to easily access disparate registry information across numerous technological and scientific disciplines. Once registries are standardized the need to provide registry support in terms of setup and operations, resolution of conflicts between registries and other issues will need to be addressed. Registries should not be confused with repositories. No end user data is "stored" in a registry nor is it a configuration control system. Once a registry standard is created and approved, the technologies that should be registered must be identified and prioritized. In this paper, we will identify and define a registry process that is compatible with the Constellation initiative and other non related space activities and organizations. We will then identify and define the various technologies that should use a registry to provide interoperability. The first set of

Geospatial Applications on Different Parallel and Distributed Systems in enviroGRIDS Project

Science.gov (United States)

Rodila, D.; Bacu, V.; Gorgan, D.

2012-04-01

The execution of Earth Science applications and services on parallel and distributed systems has become a necessity especially due to the large amounts of Geospatial data these applications require and the large geographical areas they cover. The parallelization of these applications comes to solve important performance issues and can spread from task parallelism to data parallelism as well. Parallel and distributed architectures such as Grid, Cloud, Multicore, etc. seem to offer the necessary functionalities to solve important problems in the Earth Science domain: storing, distribution, management, processing and security of Geospatial data, execution of complex processing through task and data parallelism, etc. A main goal of the FP7-funded project enviroGRIDS (Black Sea Catchment Observation and Assessment System supporting Sustainable Development) [1] is the development of a Spatial Data Infrastructure targeting this catchment region but also the development of standardized and specialized tools for storing, analyzing, processing and visualizing the Geospatial data concerning this area. For achieving these objectives, the enviroGRIDS deals with the execution of different Earth Science applications, such as hydrological models, Geospatial Web services standardized by the Open Geospatial Consortium (OGC) and others, on parallel and distributed architecture to maximize the obtained performance. This presentation analysis the integration and execution of Geospatial applications on different parallel and distributed architectures and the possibility of choosing among these architectures based on application characteristics and user requirements through a specialized component. Versions of the proposed platform have been used in enviroGRIDS project on different use cases such as: the execution of Geospatial Web services both on Web and Grid infrastructures [2] and the execution of SWAT hydrological models both on Grid and Multicore architectures [3]. The current

Grid Databases for Shared Image Analysis in the MammoGrid Project

CERN Document Server

Amendolia, S R; Hauer, T; Manset, D; McClatchey, R; Odeh, M; Reading, T; Rogulin, D; Schottlander, D; Solomonides, T

2004-01-01

The MammoGrid project aims to prove that Grid infrastructures can be used for collaborative clinical analysis of database-resident but geographically distributed medical images. This requires: a) the provision of a clinician-facing front-end workstation and b) the ability to service real-world clinician queries across a distributed and federated database. The MammoGrid project will prove the viability of the Grid by harnessing its power to enable radiologists from geographically dispersed hospitals to share standardized mammograms, to compare diagnoses (with and without computer aided detection of tumours) and to perform sophisticated epidemiological studies across national boundaries. This paper outlines the approach taken in MammoGrid to seamlessly connect radiologist workstations across a Grid using an "information infrastructure" and a DICOM-compliant object model residing in multiple distributed data stores in Italy and the UK

Interoperability, Enterprise Architectures, and IT Governance in Government

OpenAIRE

Scholl , Hans ,; Kubicek , Herbert; Cimander , Ralf

2011-01-01

Part 4: Architecture, Security and Interoperability; International audience; Government represents a unique, and also uniquely complex, environment for interoperation of information systems as well as for integration of workflows and processes across governmental levels and branches. While private-sector organizations by and large have the capacity to implement “enterprise architectures” in a relatively straightforward fashion, for notable reasons governments do not enjoy such luxury. For thi...

Grid Standards and Codes | Grid Modernization | NREL

Science.gov (United States)

photovoltaics (PV) adoption have given a sense of urgency to the standards development process. The Accelerating Systems Integration Standards team is addressing this urgency by providing leadership and direction for

Evaluation of Enterprise Architecture Interoperability

National Research Council Canada - National Science Library

Jamison, Theresa A; Niska, Brice T; Layman, Phillip A; Whitney, Steven P

2005-01-01

...), which describes these architectures. The purpose of this project, suggested by Air Force Space Command, was to examine the value of existing analytical tools in making an interoperability assessment of individual enterprises, as well...

Calibrated, Enhanced-Resolution Brightness Temperature Earth System Data Record: A New Era for Gridded Passive Microwave Data

Science.gov (United States)

Hardman, M.; Brodzik, M. J.; Long, D. G.

2017-12-01

provides for easy importing and correct reprojection interoperability in many standard packages. As a consistently-processed, high-quality satellite passive microwave ESDR, we expect this data set to replace earlier gridded passive microwave data sets, and to pave the way for new insights from higher-resolution derived geophysical products.

METHODS FOR DESCRIPTION OF EDUCATION AND SCIENTIFIC SERVICES IN INFORMATION AND EDUCATION ON THE BASIS OF INTEROPERABILITY STACK EIF

Directory of Open Access Journals (Sweden)

Ekaterina V. Pavlova

2015-01-01

Full Text Available The article deals with methodology for description of scientifi c and educational services in education and information on the basis of interoperability stack EIF (European Interoperability Framework. The passage describes operation factors to depict services on every level of the methodology, tools used to describe the services and the content. We also provide the link between methodology of description with the life span of the service. The article presents an example of service description according to the methodology considering the current education and professional standards, ITIL recommendations, ontology on the OWL basis and WSDL-description. 

On the formal definition of the systems' interoperability capability: an anthropomorphic approach

Science.gov (United States)

Zdravković, Milan; Luis-Ferreira, Fernando; Jardim-Goncalves, Ricardo; Trajanović, Miroslav

2017-03-01

The extended view of enterprise information systems in the Internet of Things (IoT) introduces additional complexity to the interoperability problems. In response to this, the problem of systems' interoperability is revisited by taking into the account the different aspects of philosophy, psychology, linguistics and artificial intelligence, namely by analysing the potential analogies between the processes of human and system communication. Then, the capability to interoperate as a property of the system, is defined as a complex ability to seamlessly sense and perceive a stimulus from its environment (assumingly, a message from any other system), make an informed decision about this perception and consequently, articulate a meaningful and useful action or response, based on this decision. Although this capability is defined on the basis of the existing interoperability theories, the proposed approach to its definition excludes the assumption on the awareness of co-existence of two interoperating systems. Thus, it establishes the links between the research of interoperability of systems and intelligent software agents, as one of the systems' digital identities.

Integration of Grid and Sensor Web for Flood Monitoring and Risk Assessment from Heterogeneous Data

Science.gov (United States)

Kussul, Nataliia; Skakun, Sergii; Shelestov, Andrii

2013-04-01

described. The project was created as a testbed for evaluating and prototyping key technologies for rapid acquisition and distribution of data products for decision support systems to monitor floods and enable flood risk assessment. The system provides access to real-time products on rainfall estimates and flood potential forecast derived from the Tropical Rainfall Measuring Mission (TRMM) mission with lag time of 6 h, alerts from the Global Disaster Alert and Coordination System (GDACS) with lag time of 4 h, and the Coupled Routing and Excess STorage (CREST) model to generate alerts. These are alerts are used to trigger satellite observations. With deployed SPS service for NASA's EO-1 satellite it is possible to automatically task sensor with re-image capability of less 8 h. Therefore, with enabled computational and storage services provided by Grid and cloud infrastructure it was possible to generate flood maps within 24-48 h after trigger was alerted. To enable interoperability between system components and services OGC-compliant standards are utilized. [1] Hluchy L., Kussul N., Shelestov A., Skakun S., Kravchenko O., Gripich Y., Kopp P., Lupian E., "The Data Fusion Grid Infrastructure: Project Objectives and Achievements," Computing and Informatics, 2010, vol. 29, no. 2, pp. 319-334.

Governance of Interoperability in Intergovernmental Services - Towards an Empirical Taxonomy

Directory of Open Access Journals (Sweden)

Herbert Kubicek

2008-12-01

Full Text Available High quality and comfortable online delivery of governmental services often requires the seamless exchange of data between two or more government agencies. Smooth data exchange, in turn, requires interoperability of the databases and workflows in the agencies involved. Interoperability (IOP is a complex issue covering purely technical aspects such as transmission protocols and data exchange formats, but also content-related semantic aspects such as identifiers and the meaning of codes as well as organizational, contractual or legal issues. Starting from IOP frameworks which provide classifications of what has to be standardized, this paper, based on an ongoing research project, adopts a political and managerial view and tries to clarify the governance of achieving IOP, i.e. where and by whom IOPstandards are developed and established and how they are put into operation. By analyzing 32 cases of successful implementation of IOP in E-Government services within the European Union empirical indicators for different aspects of governance are proposed and applied to develop an empirical taxonomy of different types of IOP governance which can be used for future comparative research regarding success factors, barriers etc.

On the applicability of schema integration techniques to database interoperation

NARCIS (Netherlands)

Vermeer, Mark W.W.; Apers, Peter M.G.

1996-01-01

We discuss the applicability of schema integration techniques developed for tightly-coupled database interoperation to interoperation of databases stemming from different modelling contexts. We illustrate that in such an environment, it is typically quite difficult to infer the real-world semantics

Research of Smart Grid Cyber Architecture and Standards Deployment with High Adaptability for Security Monitoring

DEFF Research Database (Denmark)

Hu, Rui; Hu, Weihao; Chen, Zhe

2015-01-01

Security Monitoring is a critical function for smart grid. As a consequence of strongly relying on communication, cyber security must be guaranteed by the specific system. Otherwise, the DR signals and bidding information can be easily forged or intercepted. Customers’ privacy and safety may suffer...... huge losses. Although OpenADR specificationsprovide continuous, secure and reliable two-way communications in application level defined in ISO model, which is also an open architecture for security is adopted by it and no specific or proprietary technologies is restricted to OpenADR itself....... It is significant to develop a security monitoring system. This paper discussed the cyber architecture of smart grid with high adaptability for security monitoring. An adaptable structure with Demilitarized Zone (DMZ) is proposed. Focusing on this network structure, the rational utilization of standards...

Smart grid in Denmark 2.0. Implementing three key recommendations from the Smart Grid Network. [DanGrid]; Smart Grid i Danmark 2.0. Implementering af tre centrale anbefalinger fra Smart Grid netvaerket

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-11-01

In 2011 the Smart Grid Network, established by the Danish Climate and Energy minister in 2010, published a report which identifies 35 recommendations for implementing smart grid in Denmark. The present report was prepared by the Danish Energy Association and Energinet.dk and elaborates three of these recommendations: Concept for controlling the power system; Information model for the dissemination of data; Roadmap for deployment of smart grid. Concept of Smart Grid: The concept mobilizes and enables electric power demand response and production from smaller customers. This is done by customers or devices connected to the power system modify their behavior to meet the needs of the power system. The concept basically distinguishes between two different mechanisms to enable flexibility. One is the use of price signals (variable network tariffs and electricity prices), which gives customers a financial incentive to move their electricity consumption and production to times when it is of less inconvenience to the power system. The second is flexibility products, where a pre-arranged and well-specified performance - for example, a load reduction in a defined network area - can be activated as required by grid operators and / or Energinet.dk at an agreed price. Information Model for Disseminating Data: The future power system is complex with a large number of physical units, companies and individuals are actively involved in the power system. Similarly, the amount of information needed to be collected, communicated and processed grows explosively, and it is therefore essential to ensure a well-functioning IT infrastructure. A crucial element is a standardized information model in the Danish power system. The concept therefore indicates to use international standards to define an information model. Roadmap Focusing on Grid Companies' Role: There is a need to remove two key barriers. The first barrier is that the existing regulation does not support the grid using

Intellectual property disclosure in standards development

NARCIS (Netherlands)

Bekkers, R.N.A.; Catalini, C.; Martinelli, A.; Simcoe, T.

2012-01-01

Firms often collaborate to produce inter-operability standards so that independently designed products can work together. When this process takes place in a Standard Setting Organization (SSO), participants are typically required to disclose any intellectual property rights (IP) that would be

Pemanfaatan Google API Untuk Model Interoperability Web Berbasis PHP Dengan Google Drive

OpenAIRE

Sumiari, Ni Kadek

2015-01-01

Dalam sebuah website tercapinya interoperability suatu system sangatlah penting. Penggunaan database berbasis Mysql, Sql Server ataupun oracle memang sudah sangat lumrah dipergunakan dalam sebuah system berbasis website. Namun penggunaan database tersebut tidak bisa menjamin apakah interoperability dari system tersebut dapat tercapai. Selain dari keamanan data dari segi implementasi system juga cukup sulit. Salah satu solusi dalam mencapi interoperability suatu system berbasis website adalah...

Establishing Interoperability of a Blog Archive through Linked Open Data

DEFF Research Database (Denmark)

Kalb, Hendrik; Lazaridou, Paraskevi; Trier, Matthias

2013-01-01

on archived data. However, interoperability among BlogForever archives, as well as with other digital libraries, is necessary in order to avoid silos of data. In this paper, we reveal some of our efforts to establish interoperability through the application of Linked Open data....

Control of grid user payment. Antitrust legal standards of control for the examination of grid user payments of the german operators of electricity distribution networks in the system of the negotiated grid access; Netznutzungsentgeltkontrolle. Kartellrechtliche Kontrollmassstaebe fuer die Ueberpruefung von Netznutzungsentgelten der deutschen Elektrizitaetsverteilungsnetzbetreiber im System des verhandelten Netzzungangs

Energy Technology Data Exchange (ETDEWEB)

Stappert, H.

2007-07-01

For years their exists a controversy concerning to the permissible height of payments for the use of distribution networks in the electricity supply in the system of the negotiated grid access. Under this aspect, the author of the contribution under consideration reports on antitrust legal standards of control for the examination of grid user payments of the German operators of electricity distribution networks. The main aspects are: test standard; relation to energy law; market demarcation; position of the norm receiver; control methods; spatial comparison of interior prices; control of costs.

Micro grids toward the smart grid

International Nuclear Information System (INIS)

Guerrero, J.

2011-01-01

Worldwide electrical grids are expecting to become smarter in the near future, with interest in Microgrids likely to grow. A microgrid can be defined as a part of the grid with elements of prime energy movers, power electronics converters, distributed energy storage systems and local loads, that can operate autonomously but also interacting with main grid. Thus, the ability of intelligent Microgrids to operate in island mode or connected to the grid will be a keypoint to cope with new functionalities and the integration of renewable energy resources. The functionalities expected for these small grids are: black start operation, frequency and voltage stability, active and reactive power flow control, active power filter capabilities, and storage energy management. In this presentation, a review of the main concepts related to flexible Microgrids will be introduced, with examples of real Microgrids. AC and DC Microgrids to integrate renewable and distributed energy resources will also be presented, as well as distributed energy storage systems, and standardization issues of these Microgrids. Finally, Microgrid hierarchical control will be analyzed looking at three different levels: i) a primary control based on the droop method, including an output impedance virtual loop; ii) a secondary control, which enables restoring any deviations produced by the primary control; and iii) a tertiary control to manage the power flow between the microgrid and the external electrical distribution system.

GEMSS: grid-infrastructure for medical service provision.

Science.gov (United States)

Benkner, S; Berti, G; Engelbrecht, G; Fingberg, J; Kohring, G; Middleton, S E; Schmidt, R

2005-01-01

The European GEMSS Project is concerned with the creation of medical Grid service prototypes and their evaluation in a secure service-oriented infrastructure for distributed on demand/supercomputing. Key aspects of the GEMSS Grid middleware include negotiable QoS support for time-critical service provision, flexible support for business models, and security at all levels in order to ensure privacy of patient data as well as compliance to EU law. The GEMSS Grid infrastructure is based on a service-oriented architecture and is being built on top of existing standard Grid and Web technologies. The GEMSS infrastructure offers a generic Grid service provision framework that hides the complexity of transforming existing applications into Grid services. For the development of client-side applications or portals, a pluggable component framework has been developed, providing developers with full control over business processes, service discovery, QoS negotiation, and workflow, while keeping their underlying implementation hidden from view. A first version of the GEMSS Grid infrastructure is operational and has been used for the set-up of a Grid test-bed deploying six medical Grid service prototypes including maxillo-facial surgery simulation, neuro-surgery support, radio-surgery planning, inhaled drug-delivery simulation, cardiovascular simulation and advanced image reconstruction. The GEMSS Grid infrastructure is based on standard Web Services technology with an anticipated future transition path towards the OGSA standard proposed by the Global Grid Forum. GEMSS demonstrates that the Grid can be used to provide medical practitioners and researchers with access to advanced simulation and image processing services for improved preoperative planning and near real-time surgical support.

Smart grids in the colombian electric system: Current situation and potential opportunities

Directory of Open Access Journals (Sweden)

William Mauricio Giral Ramírez

2017-07-01

Full Text Available Context: This paper focuses on providing a functional analysis of smart grids, with the purpose of establishing a framework to identify the main characteristics of the current electric interconnection system in Colombia. It also names the positive incentives proposed by the Colombian government to support both research and development projects that implement non-conventional energy sources and promoting energy management based on efficiency. Method: An architecture model that describes the components interoperability of a smart grid is presented using a descriptive methodology. Results: The results include a list of the objectives established by the Colombian public and private entities related to energy development, specially focusing on the opportunities to provide some kind of artificial intelligence to the current electrical system. Conclusions: It is necessary for the Colombian energy system to supply the energy demand considering electrical safety, social equity, and the minimum environmental impact. These restrictions impose new challenges for the energy system itself: From a technical point of view, the traditional electrical grid must be outfitted with the characteristics of a smart grid, and from a legal perspective, it is essential to generate a clear regulatory framework that promotes the development of this type of technology.

Interoperability science cases with the CDPP tools

Science.gov (United States)

Nathanaël, J.; Cecconi, B.; André, N.; Bouchemit, M.; Gangloff, M.; Budnik, E.; Jacquey, C.; Pitout, F.; Durand, J.; Rouillard, A.; Lavraud, B.; Genot, V. N.; Popescu, D.; Beigbeder, L.; Toniutti, J. P.; Caussarieu, S.

2017-12-01

Data exchange protocols are never as efficient as when they are invisible for the end user who is then able to discover data, to cross compare observations and modeled data and finally to perform in depth analysis. Over the years these protocols, including SAMP from IVOA, EPN-TAP from the Europlanet 2020 RI community, backed by standard web-services, have been deployed in tools designed by the French Centre de Données de la Physique des Plasmas (CDPP) including AMDA, the Propagation Tool, 3DView, ... . This presentation will focus on science cases which show the capability of interoperability in the planetary and heliophysics contexts, involving both CDPP and companion tools. Europlanet 2020 RI has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 654208.

A principled approach to grid middleware

DEFF Research Database (Denmark)

Berthold, Jost; Bardino, Jonas; Vinter, Brian

2011-01-01

This paper provides an overview of MiG, a Grid middleware for advanced job execution, data storage and group collaboration in an integrated, yet lightweight solution using standard software. In contrast to most other Grid middlewares, MiG is developed with a particular focus on usability and mini......This paper provides an overview of MiG, a Grid middleware for advanced job execution, data storage and group collaboration in an integrated, yet lightweight solution using standard software. In contrast to most other Grid middlewares, MiG is developed with a particular focus on usability...... and minimal system requirements, applying strict principles to keep the middleware free of legacy burdens and overly complicated design. We provide an overview of MiG and describe its features in view of the Grid vision and its relation to more recent cloud computing trends....

Eight reasons payer interoperability and data sharing are essential in ACOs. Interoperability standards could be a prerequisite to measuring care.

Science.gov (United States)

Mookencherry, Shefali

2012-01-01

It makes strategic and business sense for payers and providers to collaborate on how to take substantial cost out of the healthcare delivery system. Acting independently, neither medical groups, hospitals nor health plans have the optimal mix of resources and incentives to significantly reduce costs. Payers have core assets such as marketing, claims data, claims processing, reimbursement systems and capital. It would be cost prohibitive for all but the largest providers to develop these capabilities in order to compete directly with insurers. Likewise, medical groups and hospitals are positioned to foster financial interdependence among providers and coordinate the continuum of patient illnesses and care settings. Payers and providers should commit to reasonable clinical and cost goals, and share resources to minimize expenses and financial risks. It is in the interest of payers to work closely with providers on risk-management strategies because insurers need synergy with ACOs to remain cost competitive. It is in the interest of ACOs to work collaboratively with payers early on to develop reasonable and effective performance benchmarks. Hence, it is essential to have payer interoperability and data sharing integrated in an ACO model.

Bringing Health and Fitness Data Together for Connected Health Care: Mobile Apps as Enablers of Interoperability.

Science.gov (United States)

Gay, Valerie; Leijdekkers, Peter

2015-11-18

A transformation is underway regarding how we deal with our health. Mobile devices make it possible to have continuous access to personal health information. Wearable devices, such as Fitbit and Apple's smartwatch, can collect data continuously and provide insights into our health and fitness. However, lack of interoperability and the presence of data silos prevent users and health professionals from getting an integrated view of health and fitness data. To provide better health outcomes, a complete picture is needed which combines informal health and fitness data collected by the user together with official health records collected by health professionals. Mobile apps are well positioned to play an important role in the aggregation since they can tap into these official and informal health and data silos. The objective of this paper is to demonstrate that a mobile app can be used to aggregate health and fitness data and can enable interoperability. It discusses various technical interoperability challenges encountered while integrating data into one place. For 8 years, we have worked with third-party partners, including wearable device manufacturers, electronic health record providers, and app developers, to connect an Android app to their (wearable) devices, back-end servers, and systems. The result of this research is a health and fitness app called myFitnessCompanion, which enables users to aggregate their data in one place. Over 6000 users use the app worldwide to aggregate their health and fitness data. It demonstrates that mobile apps can be used to enable interoperability. Challenges encountered in the research process included the different wireless protocols and standards used to communicate with wireless devices, the diversity of security and authorization protocols used to be able to exchange data with servers, and lack of standards usage, such as Health Level Seven, for medical information exchange. By limiting the negative effects of health data silos

Interoperable End-to-End Remote Patient Monitoring Platform Based on IEEE 11073 PHD and ZigBee Health Care Profile.

Science.gov (United States)

Clarke, Malcolm; de Folter, Joost; Verma, Vivek; Gokalp, Hulya

2018-05-01

This paper describes the implementation of an end-to-end remote monitoring platform based on the IEEE 11073 standards for personal health devices (PHD). It provides an overview of the concepts and approaches and describes how the standard has been optimized for small devices with limited resources of processor, memory, and power that use short-range wireless technology. It explains aspects of IEEE 11073, including the domain information model, state model, and nomenclature, and how these support its plug-and-play architecture. It shows how these aspects underpin a much larger ecosystem of interoperable devices and systems that include IHE PCD-01, HL7, and BlueTooth LE medical devices, and the relationship to the Continua Guidelines, advocating the adoption of data standards and nomenclature to support semantic interoperability between health and ambient assisted living in future platforms. The paper further describes the adaptions that have been made in order to implement the standard on the ZigBee Health Care Profile and the experiences of implementing an end-to-end platform that has been deployed to frail elderly patients with chronic disease(s) and patients with diabetes.

Requirements for and barriers towards interoperable ehealth technology in primary care

NARCIS (Netherlands)

Oude Nijeweme-d'Hollosy, Wendeline; van Velsen, Lex Stefan; Huygens, Martine; Hermens, Hermanus J.

Despite eHealth technology's rapid growth, eHealth applications are rarely embedded within primary care, mostly because systems lack interoperability. This article identifies requirements for, and barriers towards, interoperable eHealth technology from healthcare professionals' perspective -- the

The Measurement of Quality of Semantic Standards : the Application of a Quality Model on the SETU standard for eGovernment

NARCIS (Netherlands)

Folmer, Erwin; van Bekkum, Michael; Oude Luttighuis, Paul; van Hillegersberg, Jos

2011-01-01

eGovernment interoperability should be dealt with using high-quality standards. A quality model for standards is presented based on knowledge from the software engineering domain. In the tradition of action research the model is used on the SETU standard, a standard that is mandatory in the public

Connected Lighting System Interoperability Study Part 1: Application Programming Interfaces

Energy Technology Data Exchange (ETDEWEB)

Gaidon, Clement [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poplawski, Michael [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2017-10-31

First in a series of studies that focuses on interoperability as realized by the use of Application Programming Interfaces (APIs), explores the diversity of such interfaces in several connected lighting systems; characterizes the extent of interoperability that they provide; and illustrates challenges, limitations, and tradeoffs that were encountered during this exploration.

Data privacy for the smart grid

CERN Document Server

Herold, Rebecca

2015-01-01

The Smart Grid and PrivacyWhat Is the Smart Grid? Changes from Traditional Energy Delivery Smart Grid Possibilities Business Model Transformations Emerging Privacy Risks The Need for Privacy PoliciesPrivacy Laws, Regulations, and Standards Privacy-Enhancing Technologies New Privacy Challenges IOT Big Data What Is the Smart Grid?Market and Regulatory OverviewTraditional Electricity Business SectorThe Electricity Open Market Classifications of Utilities Rate-Making ProcessesElectricity Consumer

Intelligence in the power grid and services to the consumers. Issue paper - working group 4; Denmark. Smart Grid Network; Intelligens i el-nettet og serviceydelser til forbrugerne. Issue paper, arbejdsgruppe 4

Energy Technology Data Exchange (ETDEWEB)

Jonsen, B.O. (Solar Danmark A/S, Vejen (Denmark)); Hauge, B. (IT-Branchen, Copenhagen (Denmark)); Strunge, C. (Energinet.dk, Fredericia (Denmark)) (and others)

2011-07-01

The Smart Grid Network was established in 2010 by the Danish climate and energy minister tasked with developing recommendations for future actions and initiatives that make it possible to handle up to 50% electricity from wind energy in the power system in 2020. The task of working group 4 was to investigate what it takes to involve consumers in smart grid and how to create good conditions for new services related to smart grid. Against this background, the working group agreed the following recommendations: 1) Enhance consumer engagement. A prerequisite for electricity customers becoming involved in smart grid is that they have awareness and knowledge about the smart grid and their own possibilities for action in relation thereto. Therefore it is important that concepts such as smart grid and flexible electricity consumption gradually become popular among electric customers; 2) Minimize the risk. In order to promote electric customers' and other stakeholders' participation in the smart grid, the risk of this participation must be minimized. It is therefore recommended to enhance the skills of the professionals and to establish a common framework for security; 3) Make it easier to create new services. Part of the potential of smart grid can be realized through new services such as delivery of flexible electricity consumption for electric cars and heat pumps and the resale of local power generation at the customer. To facilitate the conditions for these services, the working group recommends that better access to relevant data is created, that the interoperability of smart grid solutions is strengthened, that requirements for buildings are made, that it is made easier to be an aggregator, and that test and inspiration laboratories for small and medium enterprises in the smart grid area are established. (LN)

Metadata behind the Interoperability of Wireless Sensor Networks

Directory of Open Access Journals (Sweden)

Miguel Angel Manso Callejo

2009-05-01

Full Text Available Wireless Sensor Networks (WSNs produce changes of status that are frequent, dynamic and unpredictable, and cannot be represented using a linear cause-effect approach. Consequently, a new approach is needed to handle these changes in order to support dynamic interoperability. Our approach is to introduce the notion of context as an explicit representation of changes of a WSN status inferred from metadata elements, which in turn, leads towards a decision-making process about how to maintain dynamic interoperability. This paper describes the developed context model to represent and reason over different WSN status based on four types of contexts, which have been identified as sensing, node, network and organisational contexts. The reasoning has been addressed by developing contextualising and bridges rules. As a result, we were able to demonstrate how contextualising rules have been used to reason on changes of WSN status as a first step towards maintaining dynamic interoperability.

The Earth System Grid Federation : an Open Infrastructure for Access to Distributed Geospatial Data

Science.gov (United States)

Cinquini, Luca; Crichton, Daniel; Mattmann, Chris; Harney, John; Shipman, Galen; Wang, Feiyi; Ananthakrishnan, Rachana; Miller, Neill; Denvil, Sebastian; Morgan, Mark;

AN INTEROPERABLE ARCHITECTURE FOR AIR POLLUTION EARLY WARNING SYSTEM BASED ON SENSOR WEB

Directory of Open Access Journals (Sweden)

F. Samadzadegan

2013-09-01

Full Text Available Environmental monitoring systems deal with time-sensitive issues which require quick responses in emergency situations. Handling the sensor observations in near real-time and obtaining valuable information is challenging issues in these systems from a technical and scientific point of view. The ever-increasing population growth in urban areas has caused certain problems in developing countries, which has direct or indirect impact on human life. One of applicable solution for controlling and managing air quality by considering real time and update air quality information gathered by spatially distributed sensors in mega cities, using sensor web technology for developing monitoring and early warning systems. Urban air quality monitoring systems using functionalities of geospatial information system as a platform for analysing, processing, and visualization of data in combination with Sensor Web for supporting decision support systems in disaster management and emergency situations. This system uses Sensor Web Enablement (SWE framework of the Open Geospatial Consortium (OGC, which offers a standard framework that allows the integration of sensors and sensor data into spatial data infrastructures. SWE framework introduces standards for services to access sensor data and discover events from sensor data streams as well as definition set of standards for the description of sensors and the encoding of measurements. The presented system provides capabilities to collect, transfer, share, process air quality sensor data and disseminate air quality status in real-time. It is possible to overcome interoperability challenges by using standard framework. In a routine scenario, air quality data measured by in-situ sensors are communicated to central station where data is analysed and processed. The extracted air quality status is processed for discovering emergency situations, and if necessary air quality reports are sent to the authorities. This research

An Interoperable Architecture for Air Pollution Early Warning System Based on Sensor Web

Science.gov (United States)

Samadzadegan, F.; Zahmatkesh, H.; Saber, M.; Ghazi khanlou, H. J.

2013-09-01

Environmental monitoring systems deal with time-sensitive issues which require quick responses in emergency situations. Handling the sensor observations in near real-time and obtaining valuable information is challenging issues in these systems from a technical and scientific point of view. The ever-increasing population growth in urban areas has caused certain problems in developing countries, which has direct or indirect impact on human life. One of applicable solution for controlling and managing air quality by considering real time and update air quality information gathered by spatially distributed sensors in mega cities, using sensor web technology for developing monitoring and early warning systems. Urban air quality monitoring systems using functionalities of geospatial information system as a platform for analysing, processing, and visualization of data in combination with Sensor Web for supporting decision support systems in disaster management and emergency situations. This system uses Sensor Web Enablement (SWE) framework of the Open Geospatial Consortium (OGC), which offers a standard framework that allows the integration of sensors and sensor data into spatial data infrastructures. SWE framework introduces standards for services to access sensor data and discover events from sensor data streams as well as definition set of standards for the description of sensors and the encoding of measurements. The presented system provides capabilities to collect, transfer, share, process air quality sensor data and disseminate air quality status in real-time. It is possible to overcome interoperability challenges by using standard framework. In a routine scenario, air quality data measured by in-situ sensors are communicated to central station where data is analysed and processed. The extracted air quality status is processed for discovering emergency situations, and if necessary air quality reports are sent to the authorities. This research proposed an

75 FR 55306 - Smart Grid Advisory Committee

Science.gov (United States)

2010-09-10

... accommodate Committee business. The final agenda will be posted on the Smart Grid Web site at http://www.nist.... The Committee shall provide input to NIST on the Smart Grid Standards, Priority, and Gaps. The... research and standards activities. 5. Upon request of the Director of NIST, the Committee will prepare...

Interoperabilidad de sistemas de organización del conocimiento: el estado del arte Interoperability of knowledge organization systems: the state of the art

Directory of Open Access Journals (Sweden)

Ana M. Martínez Tamayo

2011-06-01

Full Text Available La interoperabilidad entre distintos sistemas de organización del conocimiento (SOC ha cobrado gran importancia en los últimos tiempos, con el propósito de facilitar la búsqueda simultánea en varias bases de datos o bien fusionar distintas bases de datos en una sola. Las nuevas normas para el diseño y desarrollo de SOC, la estadounidense Z39.19:2005 y la británica BS 8723-4:2007, incluyen recomendaciones detalladas para la interoperabilidad. También se encuentra en preparación una nueva norma ISO 25964-1 sobre tesauros e interoperabilidad que se agregará a las anteriores. La tecnología disponible proporciona herramientas para este fin, como son los formatos y requisitos funcionales de autoridades y las herramientas de la Web Semántica RDF/OWL, SKOS Core y XML. Por otro lado, actualmente es muy difícil diseñar y desarrollar nuevos SOC debido a los problemas económicos, de modo que la interoperabilidad hace posible aprovechar los SOC existentes. En este trabajo se revisan los conceptos básicos, los modelos y métodos recomendados por las normas, así como numerosas experiencias de interoperabilidad entre SOC que han sido documentadas.The interoperability between knowledge organization systems (KOS has become very important in recent years, in order to facilitate simultaneous searches in several databases or to merge different databases into one. The new standards for KOS design and development, the American Z39.19:2005 and the British 8723-4:2007, include detailed recommendations for interoperability. Also, there is a new ISO standard in preparation, the 25964-1 about thesauri and interoperability, which will be added to the above mentioned ones. The available technology provides tools for interoperability, e.g. formats and functional requirements for subject authority, as well as those for Semantic Web RDF/OWL, SKOS Core and XML. On the other hand, presently it is very hard to design and develop new KOS due to economical problems

Towards Interoperable Preservation Repositories: TIPR

Directory of Open Access Journals (Sweden)

Priscilla Caplan

2010-07-01

Full Text Available Towards Interoperable Preservation Repositories (TIPR is a project funded by the Institute of Museum and Library Services to create and test a Repository eXchange Package (RXP. The package will make it possible to transfer complex digital objects between dissimilar preservation repositories.  For reasons of redundancy, succession planning and software migration, repositories must be able to exchange copies of archival information packages with each other. Every different repository application, however, describes and structures its archival packages differently. Therefore each system produces dissemination packages that are rarely understandable or usable as submission packages by other repositories. The RXP is an answer to that mismatch. Other solutions for transferring packages between repositories focus either on transfers between repositories of the same type, such as DSpace-to-DSpace transfers, or on processes that rely on central translation services.  Rather than build translators between many dissimilar repository types, the TIPR project has defined a standards-based package of metadata files that can act as an intermediary information package, the RXP, a lingua franca all repositories can read and write.

U.S. Isostatic Residual Gravity Grid

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — isores.bin - standard grid containing isostatic residual gravity map for U.S. Grid interval = 4 km. Projection is Albers (central meridian = 96 degrees West; base...

Towards E-Society Policy Interoperability

Science.gov (United States)

Iannella, Renato

The move towards the Policy-Oriented Web is destined to provide support for policy expression and management in the core web layers. One of the most promising areas that can drive this new technology adoption is e-Society communities. With so much user-generated content being shared by these social networks, there is the real danger that the implicit sharing rules that communities have developed over time will be lost in translation in the new digital communities. This will lead to a corresponding loss in confidence in e-Society sites. The Policy-Oriented Web attempts to turn the implicit into the explicit with a common framework for policy language interoperability and awareness. This paper reports on the policy driving factors from the Social Networks experiences using real-world use cases and scenarios. In particular, the key functions of policy-awareness - for privacy, rights, and identity - will be the driving force that enables the e-Society to appreciate new interoperable policy regimes.

Interoperability of Electronic Health Records: A Physician-Driven Redesign.

Science.gov (United States)

Miller, Holly; Johns, Lucy

2018-01-01

PURPOSE: Electronic health records (EHRs), now used by hundreds of thousands of providers and encouraged by federal policy, have the potential to improve quality and decrease costs in health care. But interoperability, although technically feasible among different EHR systems, is the weak link in the chain of logic. Interoperability is inhibited by poor understanding, by suboptimal implementation, and at times by a disinclination to dilute market share or patient base on the part of vendors or providers, respectively. The intent of this project has been to develop a series of practicable recommendations that, if followed by EHR vendors and users, can promote and enhance interoperability, helping EHRs reach their potential. METHODOLOGY: A group of 11 physicians, one nurse, and one health policy consultant, practicing from California to Massachusetts, has developed a document titled "Feature and Function Recommendations To Optimize Clinician Usability of Direct Interoperability To Enhance Patient Care" that offers recommendations from the clinician point of view. This report introduces some of these recommendations and suggests their implications for policy and the "virtualization" of EHRs. CONCLUSION: Widespread adoption of even a few of these recommendations by designers and vendors would enable a major advance toward the "Triple Aim" of improving the patient experience, improving the health of populations, and reducing per capita costs.

Enterprise Interoperability - Proceedings of the 5th International IFIP Working Conference on Enterprise Interoperability, IWEI 2013

NARCIS (Netherlands)

van Sinderen, Marten J.; Oude Luttighuis, P.H.W.M.; Folmer, Erwin Johan Albert; Bosems, S.; Unknown, [Unknown

IWEI is an International IFIP Working Conference covering all aspects of enterprise interoperability with the purpose of achieving flexible cross-organizational collaboration through integrated support at business and technical levels. It provides a forum for discussing ideas and results among both

Sustainability of Open-Source Software Organizations as Underpinning for Sustainable Interoperability on Large Scales

Science.gov (United States)

Fulker, D. W.; Gallagher, J. H. R.

2015-12-01

OPeNDAP's Hyrax data server is an open-source framework fostering interoperability via easily-deployed Web services. Compatible with solutions listed in the (PA001) session description—federation, rigid standards and brokering/mediation—the framework can support tight or loose coupling, even with dependence on community-contributed software. Hyrax is a Web-services framework with a middleware-like design and a handler-style architecture that together reduce the interoperability challenge (for N datatypes and M user contexts) to an O(N+M) problem, similar to brokering. Combined with an open-source ethos, this reduction makes Hyrax a community tool for gaining interoperability. E.g., in its response to the Big Earth Data Initiative (BEDI), NASA references OPeNDAP-based interoperability. Assuming its suitability, the question becomes: how sustainable is OPeNDAP, a small not-for-profit that produces open-source software, i.e., has no software-sales? In other words, if geoscience interoperability depends on OPeNDAP and similar organizations, are those entities in turn sustainable? Jim Collins (in Good to Great) highlights three questions that successful companies can answer (paraphrased here): What is your passion? Where is your world-class excellence? What drives your economic engine? We attempt to shed light on OPeNDAP sustainability by examining these. Passion: OPeNDAP has a focused passion for improving the effectiveness of scientific data sharing and use, as deeply-cooperative community endeavors. Excellence: OPeNDAP has few peers in remote, scientific data access. Skills include computer science with experience in data science, (operational, secure) Web services, and software design (for servers and clients, where the latter vary from Web pages to standalone apps and end-user programs). Economic Engine: OPeNDAP is an engineering services organization more than a product company, despite software being key to OPeNDAP's reputation. In essence, provision of

Grid Frequency Extreme Event Analysis and Modeling: Preprint

Energy Technology Data Exchange (ETDEWEB)

Florita, Anthony R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Clark, Kara [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Gevorgian, Vahan [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Folgueras, Maria [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Wenger, Erin [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-11-01

Sudden losses of generation or load can lead to instantaneous changes in electric grid frequency and voltage. Extreme frequency events pose a major threat to grid stability. As renewable energy sources supply power to grids in increasing proportions, it becomes increasingly important to examine when and why extreme events occur to prevent destabilization of the grid. To better understand frequency events, including extrema, historic data were analyzed to fit probability distribution functions to various frequency metrics. Results showed that a standard Cauchy distribution fit the difference between the frequency nadir and prefault frequency (f_(C-A)) metric well, a standard Cauchy distribution fit the settling frequency (f_B) metric well, and a standard normal distribution fit the difference between the settling frequency and frequency nadir (f_(B-C)) metric very well. Results were inconclusive for the frequency nadir (f_C) metric, meaning it likely has a more complex distribution than those tested. This probabilistic modeling should facilitate more realistic modeling of grid faults.

A Review of the American Recovery and Reinvestment Act Smart Grid Projects and Their Implications for China

Energy Technology Data Exchange (ETDEWEB)

Liu, Xu [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Marnay, Chris [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Feng, Wei [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Zhou, Nan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Karali, Nihan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2017-06-21

The Chinese government has paid growing attention to renewable energy development and has set ambitious goals for carbon dioxide (CO2) emissions reduction and energy savings. Smart grid (SG) technologies have been regarded as emerging ways to integrate renewable energy and to help achieve these climate and energy goals. This report first reviews completed SG demonstrations under the U.S. American Recovery and Reinvestment Act (ARRA); especially two key programs: the SG Investment Grant (SGIG) and the SG Demonstration Project (SGDP). Under the SGIG, the larger of the two programs, over $3.4 billion was used to help industry deploy existing advanced SG technologies and tools to improve grid performance and reduce costs. Including industry investment, a total of $8 billion was spent on 99 cost-shared projects, which involved more than 200 participating electric utilities and other organizations. These projects aimed to modernize the electric grid, strengthen cyber security, improve interoperability, and collect comprehensive data on SG operations and benefits.

Definition of the Compute Accounting Record (CAR)

CERN Document Server

Guarise, A.

2011-01-01

In this document we define a Compute Accounting Usage Record on the basis of the already existing OGF UR V1.0 standard. The existing standard has been slightly modified both in syntactical and semantic aspects to allow for greater interoperability for the existing middleware layers and taking into consideration existing grid use cases.

A Grid Architecture for Manufacturing Database System

Directory of Open Access Journals (Sweden)

Laurentiu CIOVICĂ

2011-06-01

Full Text Available Before the Enterprise Resource Planning concepts business functions within enterprises were supported by small and isolated applications, most of them developed internally. Yet today ERP platforms are not by themselves the answer to all organizations needs especially in times of differentiated and diversified demands among end customers. ERP platforms were integrated with specialized systems for the management of clients, Customer Relationship Management and vendors, Supplier Relationship Management. They were integrated with Manufacturing Execution Systems for better planning and control of production lines. In order to offer real time, efficient answers to the management level, ERP systems were integrated with Business Intelligence systems. This paper analyses the advantages of grid computing at this level of integration, communication and interoperability between complex specialized informatics systems with a focus on the system architecture and data base systems.

Evaluation of Interoperability Protocols in Repositories of Electronic Theses and Dissertations

Science.gov (United States)

Hakimjavadi, Hesamedin; Masrek, Mohamad Noorman

2013-01-01

Purpose: The purpose of this study is to evaluate the status of eight interoperability protocols within repositories of electronic theses and dissertations (ETDs) as an introduction to further studies on feasibility of deploying these protocols in upcoming areas of interoperability. Design/methodology/approach: Three surveys of 266 ETD…

Flexible Control of Small Wind Turbines With Grid Failure Detection Operating in Stand-Alone and Grid-Connected Mode

DEFF Research Database (Denmark)

Teodorescu, Remus; Blaabjerg, Frede

2004-01-01

nonlinear load and excess or deficit of generated power. Grid-connection mode with current control is also enabled for the case of isolated local grid involving other dispersed power generators such as other wind turbines or diesel generators. A novel automatic mode switch method based on a phase......-to-back power conversion configuration is chosen where the generator converter uses a built-in standard flux vector control to control the speed of the turbine shaft while the grid-side converter uses a standard pulse-width modulation active rectifier control strategy implemented in a DSP controller. The design...

SUNSEED — An evolutionary path to smart grid comms over converged telco and energy provider networks

DEFF Research Database (Denmark)

Stefanovic, Cedomir; Popovski, Petar; Jorguseski, Ljupco

2014-01-01

of energy distribution service operators (DSO) and telecom operators (telco) for the future smart grid operations and services. To achieve this objective, SUNSEED proposes an evolutionary approach to converge existing DSO and telco networks, consisting of six steps: overlap, interconnect, interoperate......SUNSEED, “Sustainable and robust networking for smart electricity distribution”, is a 3-year project started in 2014 and partially funded under call FP7-ICT-2013-11. The project objective is to research, design and implement methods for exploitation of existing communication infrastructure...

A Simple XML Producer-Consumer Protocol

Science.gov (United States)

Smith, Warren; Gunter, Dan; Quesnel, Darcy; Biegel, Bryan (Technical Monitor)

2001-01-01

There are many different projects from government, academia, and industry that provide services for delivering events in distributed environments. The problem with these event services is that they are not general enough to support all uses and they speak different protocols so that they cannot interoperate. We require such interoperability when we, for example, wish to analyze the performance of an application in a distributed environment. Such an analysis might require performance information from the application, computer systems, networks, and scientific instruments. In this work we propose and evaluate a standard XML-based protocol for the transmission of events in distributed systems. One recent trend in government and academic research is the development and deployment of computational grids. Computational grids are large-scale distributed systems that typically consist of high-performance compute, storage, and networking resources. Examples of such computational grids are the DOE Science Grid, the NASA Information Power Grid (IPG), and the NSF Partnerships for Advanced Computing Infrastructure (PACIs). The major effort to deploy these grids is in the area of developing the software services to allow users to execute applications on these large and diverse sets of resources. These services include security, execution of remote applications, managing remote data, access to information about resources and services, and so on. There are several toolkits for providing these services such as Globus, Legion, and Condor. As part of these efforts to develop computational grids, the Global Grid Forum is working to standardize the protocols and APIs used by various grid services. This standardization will allow interoperability between the client and server software of the toolkits that are providing the grid services. The goal of the Performance Working Group of the Grid Forum is to standardize protocols and representations related to the storage and distribution of

Experimental Evaluation of Grid Support Enabled PV Inverter Response to Abnormal Grid Conditions: Preprint

Energy Technology Data Exchange (ETDEWEB)

Nelson, Austin; Martin, Gregory; Hurtt, James

2017-05-08

As revised interconnection standards for grid-tied photovoltaic (PV) inverters address new advanced grid support functions (GSFs), there is increasing interest in inverter performance in the case of abnormal grid conditions. The growth of GSF-enabled inverters has outpaced the industry standards that define their operation, although recently published updates to UL1741 with Supplement SA define test conditions for GSFs such as volt-var control, frequency-watt control, and volt-age/frequency ride-through, among others. A comparative experimental evaluation has been completed on four commercially available, three-phase PV inverters in the 24.0-39.8 kVA power range on their GSF capability and the effect on abnormal grid condition response. This study examines the impact particular GSF implementations have on run-on times during islanding conditions, peak voltages in load rejection overvoltage scenarios, and peak currents during single-phase and three-phase fault events for individual inverters. This report reviews comparative test data, which shows that GSFs have little impact on the metrics of interest in most tests cases.

Ocean Data Interoperability Platform (ODIP): using regional data systems for global ocean research

Science.gov (United States)

Schaap, D.; Thijsse, P.; Glaves, H.

2017-12-01

Ocean acidification, loss of coral reefs, sustainable exploitation of the marine environment are just a few of the challenges researchers around the world are currently attempting to understand and address. However, studies of these ecosystem level challenges are impossible unless researchers can discover and re-use the large volumes of interoperable multidisciplinary data that are currently only accessible through regional and global data systems that serve discreet, and often discipline specific, user communities. The plethora of marine data systems currently in existence are also using different standards, technologies and best practices making re-use of the data problematic for those engaged in interdisciplinary marine research. The Ocean Data Interoperability Platform (ODIP) is responding to this growing demand for discoverable, accessible and reusable data by establishing the foundations for a common global framework for marine data management. But creation of such an infrastructure is a major undertaking, and one that needs to be achieved in part by establishing different levels of interoperability across existing regional and global marine e-infrastructures. Workshops organised by ODIP II facilitate dialogue between selected regional and global marine data systems in an effort to identify potential solutions that integrate these marine e-infrastructures. The outcomes of these discussions have formed the basis for a number of prototype development tasks that aim to demonstrate effective sharing of data across multiple data systems, and allow users to access data from more than one system through a single access point. The ODIP II project is currently developing four prototype solutions that are establishing interoperability between selected regional marine data management infrastructures in Europe, the USA, Canada and Australia, and with the global POGO, IODE Ocean Data Portal (ODP) and GEOSS systems. The potential impact of implementing these solutions for

D-ATM, a working example of health care interoperability: From dirt path to gravel road.

Science.gov (United States)

DeClaris, John-William

2009-01-01

For many years, there have been calls for interoperability within health care systems. The technology currently exists and is being used in business areas like banking and commerce, to name a few. Yet the question remains, why has interoperability not been achieved in health care? This paper examines issues encountered and success achieved with interoperability during the development of the Digital Access To Medication (D-ATM) project, sponsored by the Substance Abuse and Mental Health Services Administration (SAMHSA). D-ATM is the first government funded interoperable patient management system. The goal of this paper is to provide lessons learned and propose one possible road map for health care interoperability within private industry and how government can help.

78 FR 18322 - Smart Grid Advisory Committee Meeting

Science.gov (United States)

2013-03-26

... business. The final agenda will be posted on the Smart Grid Web site at http://www.nist.gov/smartgrid... standards, priorities, and gaps, on the overall direction, status, and health of the Smart Grid... direction of research and standards activities. Background information on the Committee is available at http...

Auto-Mapping and Configuration Method of IEC 61850 Information Model Based on OPC UA

Directory of Open Access Journals (Sweden)

In-Jae Shin

2016-11-01

Full Text Available The open-platform communication (OPC unified architecture (UA (IEC62541 is introduced as a key technology for realizing a variety of smart grid (SG use cases enabling relevant automation and control tasks. The OPC UA can expand interoperability between power systems. The top-level SG management platform needs independent middleware to transparently manage the power information technology (IT systems, including the IEC 61850. To expand interoperability between the power system for a large number of stakeholders and various standards, this paper focuses on the IEC 61850 for the digital substation. In this paper, we propose the interconnection method to integrate communication with OPC UA and convert OPC UA AddressSpace using system configuration description language (SCL of IEC 61850. We implemented the mapping process for the verification of the interconnection method. The interconnection method in this paper can expand interoperability between power systems for OPC UA integration for various data structures in the smart grid.

An E-government Interoperability Platform Supporting Personal Data Protection Regulations

OpenAIRE

González, Laura; Echevarría, Andrés; Morales, Dahiana; Ruggia, Raúl

2016-01-01

Public agencies are increasingly required to collaborate with each other in order to provide high-quality e-government services. This collaboration is usually based on the service-oriented approach and supported by interoperability platforms. Such platforms are specialized middleware-based infrastructures enabling the provision, discovery and invocation of interoperable software services. In turn, given that personal data handled by governments are often very sensitive, most governments have ...

Ocean Data Interoperability Platform (ODIP): developing a common framework for marine data management on a global scale

Science.gov (United States)

Glaves, Helen; Schaap, Dick

2016-04-01

The increasingly ocean basin level approach to marine research has led to a corresponding rise in the demand for large quantities of high quality interoperable data. This requirement for easily discoverable and readily available marine data is currently being addressed by initiatives such as SeaDataNet in Europe, Rolling Deck to Repository (R2R) in the USA and the Australian Ocean Data Network (AODN) with each having implemented an e-infrastructure to facilitate the discovery and re-use of standardised multidisciplinary marine datasets available from a network of distributed repositories, data centres etc. within their own region. However, these regional data systems have been developed in response to the specific requirements of their users and in line with the priorities of the funding agency. They have also been created independently of the marine data infrastructures in other regions often using different standards, data formats, technologies etc. that make integration of marine data from these regional systems for the purposes of basin level research difficult. Marine research at the ocean basin level requires a common global framework for marine data management which is based on existing regional marine data systems but provides an integrated solution for delivering interoperable marine data to the user. The Ocean Data Interoperability Platform (ODIP/ODIP II) project brings together those responsible for the management of the selected marine data systems and other relevant technical experts with the objective of developing interoperability across the regional e-infrastructures. The commonalities and incompatibilities between the individual data infrastructures are identified and then used as the foundation for the specification of prototype interoperability solutions which demonstrate the feasibility of sharing marine data across the regional systems and also with relevant larger global data services such as GEO, COPERNICUS, IODE, POGO etc. The potential

Is European Broadband Ready for Smart Grid?

DEFF Research Database (Denmark)

Balachandran, Kartheepan; Pedersen, Jens Myrup

2014-01-01

In this short paper we compare the communication requirements for three Smart Grid scenarios with the availability of broadband and mobile communication networks in Europe. We show that only in the most demanding case - where data is collected and transmitted every second - a standard GSM/GPRS co....../GPRS connection is not enough. Whereas in the less demanding scenarios it is almost all of the European households that can be covered by a standard broadband technology for use with Smart Grid.......In this short paper we compare the communication requirements for three Smart Grid scenarios with the availability of broadband and mobile communication networks in Europe. We show that only in the most demanding case - where data is collected and transmitted every second - a standard GSM...

75 FR 57006 - Addressing Policy and Logistical Challenges to Smart Grid Implementation

Science.gov (United States)

2010-09-17

... consumption behavior? What are reasonable expectations about how these programs could reshape consumer power... interoperability standards; supporting technology demonstrations and consumer behavior studies; and transferring... area networks be made available and financed? Are there consumers behavior or incentive barriers to the...

Epimenides: Interoperability Reasoning for Digital Preservation

NARCIS (Netherlands)

Kargakis, Yannis; Tzitzikas, Yannis; van Horik, M.P.M.

2014-01-01

This paper presents Epimenides, a system that implements a novel interoperability dependency reasoning approach for assisting digital preservation activities. A distinctive feature is that it can model also converters and emulators, and the adopted modelling approach enables the automatic reasoning

gCube Grid services

CERN Document Server

Andrade, Pedro

2008-01-01

gCube is a service-based framework for eScience applications requiring collaboratory, on-demand, and intensive information processing. It provides to these communities Virtual Research Environments (VREs) to support their activities. gCube is build on top of standard technologies for computational Grids, namely the gLite middleware. The software was produced by the DILIGENT project and will continue to be supported and further developed by the D4Science project. gCube reflects within its name a three-sided interpretation of the Grid vision of resource sharing: sharing of computational resources, sharing of structured data, and sharing of application services. As such, gCube embodies the defining characteristics of computational Grids, data Grids, and virtual data Grids. Precisely, it builds on gLite middleware for managing distributed computations and unstructured data, includes dedicated services for managing data and metadata, provides services for distributed information retrieval, allows the orchestration...

Measures for interoperability of phenotypic data: minimum information requirements and formatting.

Science.gov (United States)

Ćwiek-Kupczyńska, Hanna; Altmann, Thomas; Arend, Daniel; Arnaud, Elizabeth; Chen, Dijun; Cornut, Guillaume; Fiorani, Fabio; Frohmberg, Wojciech; Junker, Astrid; Klukas, Christian; Lange, Matthias; Mazurek, Cezary; Nafissi, Anahita; Neveu, Pascal; van Oeveren, Jan; Pommier, Cyril; Poorter, Hendrik; Rocca-Serra, Philippe; Sansone, Susanna-Assunta; Scholz, Uwe; van Schriek, Marco; Seren, Ümit; Usadel, Björn; Weise, Stephan; Kersey, Paul; Krajewski, Paweł

2016-01-01

Plant phenotypic data shrouds a wealth of information which, when accurately analysed and linked to other data types, brings to light the knowledge about the mechanisms of life. As phenotyping is a field of research comprising manifold, diverse and time-consuming experiments, the findings can be fostered by reusing and combining existing datasets. Their correct interpretation, and thus replicability, comparability and interoperability, is possible provided that the collected observations are equipped with an adequate set of metadata. So far there have been no common standards governing phenotypic data description, which hampered data exchange and reuse. In this paper we propose the guidelines for proper handling of the information about plant phenotyping experiments, in terms of both the recommended content of the description and its formatting. We provide a document called "Minimum Information About a Plant Phenotyping Experiment", which specifies what information about each experiment should be given, and a Phenotyping Configuration for the ISA-Tab format, which allows to practically organise this information within a dataset. We provide examples of ISA-Tab-formatted phenotypic data, and a general description of a few systems where the recommendations have been implemented. Acceptance of the rules described in this paper by the plant phenotyping community will help to achieve findable, accessible, interoperable and reusable data.

Designing for Change: Interoperability in a scaling and adapting environment

Science.gov (United States)

Yarmey, L.

2015-12-01

The Earth Science cyberinfrastructure landscape is constantly changing. Technologies advance and technical implementations are refined or replaced. Data types, volumes, packaging, and use cases evolve. Scientific requirements emerge and mature. Standards shift while systems scale and adapt. In this complex and dynamic environment, interoperability remains a critical component of successful cyberinfrastructure. Through the resource- and priority-driven iterations on systems, interfaces, and content, questions fundamental to stable and useful Earth Science cyberinfrastructure arise. For instance, how are sociotechnical changes planned, tracked, and communicated? How should operational stability balance against 'new and shiny'? How can ongoing maintenance and mitigation of technical debt be managed in an often short-term resource environment? The Arctic Data Explorer is a metadata brokering application developed to enable discovery of international, interdisciplinary Arctic data across distributed repositories. Completely dependent on interoperable third party systems, the Arctic Data Explorer publicly launched in 2013 with an original 3000+ data records from four Arctic repositories. Since then the search has scaled to 25,000+ data records from thirteen repositories at the time of writing. In the final months of original project funding, priorities shift to lean operations with a strategic eye on the future. Here we present lessons learned from four years of Arctic Data Explorer design, development, communication, and maintenance work along with remaining questions and potential directions.

Semantic Interoperability for Computational Mineralogy: Experiences of the eMinerals Consortium

Science.gov (United States)

Walker, A. M.; White, T. O.; Dove, M. T.; Bruin, R. P.; Couch, P. A.; Tyer, R. P.

2006-12-01

The use of atomic scale computer simulation of minerals to obtain information for geophysics and environmental science has grown enormously over the past couple of decades. It is now routine to probe mineral behavior in the Earth's deep interior and in the surface environment by borrowing methods and simulation codes from computational chemistry and physics. It is becoming increasingly important to use methods embodied in more than one of these codes to solve any single scientific problem. However, scientific codes are rarely designed for easy interoperability and data exchange; data formats are often code-specific, poorly documented and fragile, liable to frequent change between software versions, and even compiler versions. This means that the scientist's simple desire to use the methodological approaches offered by multiple codes is frustrated, and even the sharing of data between collaborators becomes fraught with difficulties. The eMinerals consortium was formed in the early stages of the UK eScience program with the aim of developing the tools needed to apply atomic scale simulation to environmental problems in a grid-enabled world, and to harness the computational power offered by grid technologies to address some outstanding mineralogical problems. One example of the kind of problem we can tackle is the origin of the compressibility anomaly in silica glass. By passing data directly between simulation and analysis tools we were able to probe this effect in more detail than has previously been possible and have shown how the anomaly is related to the details of the amorphous structure. In order to approach this kind of problem we have constructed a mini-grid, a small scale and extensible combined compute- and data-grid that allows the execution of many calculations in parallel, and the transparent storage of semantically-rich marked-up result data. Importantly, we automatically capture multiple kinds of metadata and key results from each calculation. We

ICD-11 (JLMMS) and SCT Inter-Operation.

Science.gov (United States)

Mamou, Marzouk; Rector, Alan; Schulz, Stefan; Campbell, James; Solbrig, Harold; Rodrigues, Jean-Marie

2016-01-01

The goal of this work is to contribute to a smooth and semantically sound inter-operability between the ICD-11 (International Classification of Diseases-11th revision Joint Linearization for Mortality, Morbidity and Statistics) and SNOMED CT (SCT). To guarantee such inter-operation between a classification, characterized by a single hierarchy of mutually exclusive and exhaustive classes, as is the JLMMS successor of ICD-10 on the one hand, and the multi-hierarchical, ontology-based clinical terminology SCT on the other hand, we use ontology axioms that logically express generalizable truths. This is expressed by the compositional grammar of SCT, together with queries on axiomsof SCT. We test the feasibility of the method on the circulatory chapter of ICD-11 JLMMS and present limitations and results.

Distributed Data Management on the Petascale using Heterogeneous Grid Infrastructures with DQ2

CERN Document Server

Branco, M; Salgado, P; Lassnig, M

2008-01-01

We describe Don Quijote 2 (DQ2), a new approach to the management of large scientific datasets by a dedicated middleware. This middleware is designed to handle the data organisation and data movement on the petascale for the High-Energy Physics Experiment ATLAS at CERN. DQ2 is able to maintain a well-defined quality of service in a scalable way, guarantees data consistency for the collaboration and bridges the gap between EGEE, OSG and NorduGrid infrastructures to enable true interoperability. DQ2 is specifically designed to support the access and management of large scientific datasets produced by the ATLAS experiment using heterogeneous Grid infrastructures. The DQ2 middleware manages those datasets with global services, local site services and enduser interfaces. The global services, or central catalogues, are responsible for the mapping of individual files onto DQ2 datasets. The local site services are responsible for tracking files available on-site, managing data movement and guaranteeing consistency of...

Ontology-based information standards development

OpenAIRE

Heravi, Bahareh Rahmanzadeh

2012-01-01

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University. Standards may be argued to be important enablers for achieving interoperability as they aim to provide unambiguous specifications for error-free exchange of documents and information. By implication, therefore, it is important to model and represent the concept of a standard in a clear, precise and unambiguous way. Although standards development organisations usually provide guidelines for th...

Interoperability in practice: case study of the Slovenian independence war of 1991

Directory of Open Access Journals (Sweden)

Vladimir Prebilič

2015-08-01

Full Text Available The paper will examine the theory of the interoperability of armed forces through the case of he Slovenian Independence War of 1991. Although defense system interoperability is a well-established concept, there are many obstacles to its implementation. Some defense systems do not deliberately support the idea of interoperability. One such example is the total defense system in SFR Yugoslavia, which is comprised of two defense components: the Yugoslav People’s Army (YPA and territorial defense structures organized by the federal republic. The question of interoperability is highly relevant since the war was fought between the YPA and the defense forces of the newly proclaimed independent state, Slovenia, who were partners in the total defense concept. Due to the clear asymmetry, interoperability offered a great advantage in the independence war. The Slovenian defense forces were combined into three structures: the former militia as an internal security element, the territorial defense as a military component, and the national protection forces as a “civil” defense element. Although each structure had its own command and organizational structure, during the Slovenian War they were combined into a well-structured and organized defense element that achieved victory against a much stronger, better equipped, and better supported army.

Blind Grid Scoring Record No. 290

National Research Council Canada - National Science Library

Overbay, Larry; Robitaille, George

2005-01-01

...) utilizing the APG Standardized UXO Technology Demonstration Site Blind Grid. Scoring Records have been coordinated by Larry Overbay and the Standardized UXO Technology Demonstration Site Scoring Committee...

Blind Grid Scoring Record No. 293

National Research Council Canada - National Science Library

Overbay, Larry; Robitaille, George; Archiable, Robert; Fling, Rick; McClung, Christina

2005-01-01

...) utilizing the YPG Standardized UXO Technology Demonstration Site Blind Grid. Scoring Records have been coordinated by Larry Overbay and the Standardized UXO Technology Demonstration Site Scoring Committee...

Forcing Interoperability: An Intentionally Fractured Approach

Science.gov (United States)

Gallaher, D. W.; Brodzik, M.; Scambos, T.; Stroeve, J.

2008-12-01

The NSIDC is attempting to rebuild a significant portion of its public-facing cyberinfrastructure to better meet the needs expressed by the cryospheric community. The project initially addresses a specific science need - understanding Greenland's contribution to global sea level rise through comparison and analysis of variables such as temperature, albedo, melt, ice velocity and surface elevation. This project will ultimately be expanded to cover most of NSIDC's cryospheric data. Like many organizations, we need to provide users with data discovery interfaces, collaboration tools and mapping services. Complicating this effort is the need to reduce the volume of raw data delivered to the user. Data growth, especially with time-series data, will overwhelm our software, processors and network like never before. We need to provide the users the ability to perform first level analysis directly on our site. In order to accomplish this, the users should be free to modify the behavior of these tools as well as incorporate their own tools and analysis to meet their needs. Rather than building one monolithic project to build this system, we have chosen to build three semi-independent systems. One team is building a data discovery and web based distribution system, the second is building an advanced analysis and workflow system and the third is building a customized web mapping service. These systems will use the same underlying data structures and services but will employ different technologies and teams to build their objectives, schedules and user interfaces. Obviously, we are adding complexity and risk to the overall project however this may be the best method to achieve interoperability because the development teams will be required to build off each others work. The teams will be forced to design with other users in mind as opposed to building interoperability as an afterthought, which a tendency in monolithic systems. All three teams will take advantage of preexisting

Application of Wireless Sensor and Actuator Networks to Achieve Intelligent Microgrids: A Promising Approach towards a Global Smart Grid Deployment

Directory of Open Access Journals (Sweden)

Alvaro Llaria

2016-02-01

Full Text Available Smart Grids (SGs constitute the evolution of the traditional electrical grid towards a new paradigm, which should increase the reliability, the security and, at the same time, reduce the costs of energy generation, distribution and consumption. Electrical microgrids (MGs can be considered the first stage of this evolution of the grid, because of the intelligent management techniques that must be applied to assure their correct operation. To accomplish this task, sensors and actuators will be necessary, along with wireless communication technologies to transmit the measured data and the command messages. Wireless Sensor and Actuator Networks (WSANs are therefore a promising solution to achieve an intelligent management of MGs and, by extension, the SG. In this frame, this paper surveys several aspects concerning the application of WSANs to manage MGs and the electrical grid, as well as the communication protocols that could be applied. The main concerns regarding the SG deployment are also presented, including future scenarios where the interoperability of different generation technologies must be assured.

Environmental Models as a Service: Enabling Interoperability through RESTful Endpoints and API Documentation.

Science.gov (United States)

Achieving interoperability in environmental modeling has evolved as software technology has progressed. The recent rise of cloud computing and proliferation of web services initiated a new stage for creating interoperable systems. Scientific programmers increasingly take advantag...

Future Interoperability of Camp Protection Systems (FICAPS)

Science.gov (United States)

Caron, Sylvie; Gündisch, Rainer; Marchand, Alain; Stahl, Karl-Hermann

2013-05-01

The FICAPS Project has been established as a Project of the European Defence Agency based on an initiative of Germany and France. Goal of this Project was to derive Guidelines, which by a proper implementation in future developments improve Camp Protection Systems (CPS) by enabling and improving interoperability between Camp Protection Systems and its Equipments of different Nations involved in multinational missions. These Guidelines shall allow for: • Real-time information exchange between equipments and systems of different suppliers and nations (even via SatCom), • Quick and easy replacement of equipments (even of different Nations) at run-time in the field by means of plug and play capability, thus lowering the operational and logistic costs and making the system highly available, • Enhancement of system capabilities (open and modular systems) by adding new equipment with new capabilities (just plug-in, automatic adjustment of the HMI Human Machine Interface) without costly and time consuming validation and test on system level (validation and test can be done on Equipment level), Four scenarios have been identified to summarize the interoperability requirements from an operational viewpoint. To prove the definitions given in the Guideline Document, a French and a German Demonstration System, based on existing national assets, were realized. Demonstrations, showing the capabilities given by the defined interoperability requirements with respect to the operational scenarios, were performed. Demonstrations included remote control of a CPS by another CPS, remote sensor control (Electro-Optic/InfraRed EO/IR) and remote effector control. This capability can be applied to extend the protection area or to protect distant infrastructural assets Demonstrations have been performed. The required interoperability functionality was shown successfully. Even if the focus of the FICAPS project was on camp protection, the solution found is also appropriate for other

An Interoperable Cartographic Database

OpenAIRE

Slobodanka Ključanin; Zdravko Galić

2007-01-01

The concept of producing a prototype of interoperable cartographic database is explored in this paper, including the possibilities of integration of different geospatial data into the database management system and their visualization on the Internet. The implementation includes vectorization of the concept of a single map page, creation of the cartographic database in an object-relation database, spatial analysis, definition and visualization of the database content in the form of a map on t...

Challenges to Grid Synchronization of Single-Phase Grid-Connected Inverters in Zero-Voltage Ride-Through Operation

DEFF Research Database (Denmark)

Zhang, Zhen; Yang, Yongheng; Blaabjerg, Frede

2016-01-01

With the fast development in Photovoltaic (PV) technology, the relevant grid-connection requirements/standards are continuously being updated, and more challenges have been imposed on both single-phase and three-phase grid-connected PV systems. For instance, PV systems are currently required...... to remain connected under grid voltage sags (even zero voltage condition). In this case, much attention should be paid to the grid synchronization in such a way to properly ride-through grid faults. Thus, in this paper, the most commonly-used and recently-developed Phase Locked Loop (PLL) synchronization...... methods have been evaluated for single-phase grid-connected PV systems in the case of Zero-Voltage Ride-Through (ZVRT) operation. The performances of the prior-art PLL methods in response to zero voltage faults in terms of detection precision and dynamic response are assessed in this paper. Simulation...

Intercloud Architecture Framework for Interoperability and Integration

NARCIS (Netherlands)

Demchenko, Y.; Ngo, C.; Makkes, M.X.; Strijkers, R.J.

2013-01-01

This report presents on-going research to develop the Intercloud Architecture Framework (ICAF) that addresses interoperability and integration issues in multi-provider multi-domain heterogeneous Cloud based infrastructure services and applications provisioning, including integration and

Prototyping a Web-of-Energy Architecture for Smart Integration of Sensor Networks in Smart Grids Domain.

Science.gov (United States)

Caballero, Víctor; Vernet, David; Zaballos, Agustín; Corral, Guiomar

2018-01-30

Sensor networks and the Internet of Things have driven the evolution of traditional electric power distribution networks towards a new paradigm referred to as Smart Grid. However, the different elements that compose the Information and Communication Technologies (ICTs) layer of a Smart Grid are usually conceived as isolated systems that typically result in rigid hardware architectures which are hard to interoperate, manage, and to adapt to new situations. If the Smart Grid paradigm has to be presented as a solution to the demand for distributed and intelligent energy management system, it is necessary to deploy innovative IT infrastructures to support these smart functions. One of the main issues of Smart Grids is the heterogeneity of communication protocols used by the smart sensor devices that integrate them. The use of the concept of the Web of Things is proposed in this work to tackle this problem. More specifically, the implementation of a Smart Grid's Web of Things, coined as the Web of Energy is introduced. The purpose of this paper is to propose the usage of Web of Energy by means of the Actor Model paradigm to address the latent deployment and management limitations of Smart Grids. Smart Grid designers can use the Actor Model as a design model for an infrastructure that supports the intelligent functions demanded and is capable of grouping and converting the heterogeneity of traditional infrastructures into the homogeneity feature of the Web of Things. Conducted experimentations endorse the feasibility of this solution and encourage practitioners to point their efforts in this direction.

Using Grid for the BABAR Experiment

International Nuclear Information System (INIS)

Bozzi, C.

2005-01-01

The BaBar experiment has been taking data since 1999. In 2001 the computing group started to evaluate the possibility to evolve toward a distributed computing model in a grid environment. We built a prototype system, based on the European Data Grid (EDG), to submit full-scale analysis and Monte Carlo simulation jobs. Computing elements, storage elements, and worker nodes have been installed at SLAC and at various European sites. A BaBar virtual organization (VO) and a test replica catalog (RC) are maintained in Manchester, U.K., and the experiment is using three EDG testbed resource brokers in the U.K. and in Italy. First analysis tests were performed under the assumption that a standard BaBar software release was available at the grid target sites, using RC to register information about the executable and the produced n-tuples. Hundreds of analysis jobs accessing either Objectivity or Root data files ran on the grid. We tested the Monte Carlo production using a farm of the INFN-grid testbed customized to install an Objectivity database and run BaBar simulation software. First simulation production tests were performed using standard Job Description Language commands and the output files were written on the closest storage element. A package that can be officially distributed to grid sites not specifically customized for BaBar has been prepared. We are studying the possibility to add a user friendly interface to access grid services for BaBar

The International Symposium on Grids and Clouds

Science.gov (United States)

The International Symposium on Grids and Clouds (ISGC) 2012 will be held at Academia Sinica in Taipei from 26 February to 2 March 2012, with co-located events and workshops. The conference is hosted by the Academia Sinica Grid Computing Centre (ASGC). 2012 is the decennium anniversary of the ISGC which over the last decade has tracked the convergence, collaboration and innovation of individual researchers across the Asia Pacific region to a coherent community. With the continuous support and dedication from the delegates, ISGC has provided the primary international distributed computing platform where distinguished researchers and collaboration partners from around the world share their knowledge and experiences. The last decade has seen the wide-scale emergence of e-Infrastructure as a critical asset for the modern e-Scientist. The emergence of large-scale research infrastructures and instruments that has produced a torrent of electronic data is forcing a generational change in the scientific process and the mechanisms used to analyse the resulting data deluge. No longer can the processing of these vast amounts of data and production of relevant scientific results be undertaken by a single scientist. Virtual Research Communities that span organisations around the world, through an integrated digital infrastructure that connects the trust and administrative domains of multiple resource providers, have become critical in supporting these analyses. Topics covered in ISGC 2012 include: High Energy Physics, Biomedicine & Life Sciences, Earth Science, Environmental Changes and Natural Disaster Mitigation, Humanities & Social Sciences, Operations & Management, Middleware & Interoperability, Security and Networking, Infrastructure Clouds & Virtualisation, Business Models & Sustainability, Data Management, Distributed Volunteer & Desktop Grid Computing, High Throughput Computing, and High Performance, Manycore & GPU Computing.

On the feasibility of interoperable schemes in hand biometrics.

Science.gov (United States)

Morales, Aythami; González, Ester; Ferrer, Miguel A

2012-01-01

Personal recognition through hand-based biometrics has attracted the interest of many researchers in the last twenty years. A significant number of proposals based on different procedures and acquisition devices have been published in the literature. However, comparisons between devices and their interoperability have not been thoroughly studied. This paper tries to fill this gap by proposing procedures to improve the interoperability among different hand biometric schemes. The experiments were conducted on a database made up of 8,320 hand images acquired from six different hand biometric schemes, including a flat scanner, webcams at different wavelengths, high quality cameras, and contactless devices. Acquisitions on both sides of the hand were included. Our experiment includes four feature extraction methods which determine the best performance among the different scenarios for two of the most popular hand biometrics: hand shape and palm print. We propose smoothing techniques at the image and feature levels to reduce interdevice variability. Results suggest that comparative hand shape offers better performance in terms of interoperability than palm prints, but palm prints can be more effective when using similar sensors.

Interoperable and accessible census and survey data from IPUMS.

Science.gov (United States)

Kugler, Tracy A; Fitch, Catherine A

2018-02-27

The first version of the Integrated Public Use Microdata Series (IPUMS) was released to users in 1993, and since that time IPUMS has come to stand for interoperable and accessible census and survey data. Initially created to harmonize U.S. census microdata over time, IPUMS now includes microdata from the U.S. and international censuses and from surveys on health, employment, and other topics. IPUMS also provides geo-spatial data, aggregate population data, and environmental data. IPUMS supports ten data products, each disseminating an integrated data collection with a set of tools that make complex data easy to find, access, and use. Key features are record-level integration to create interoperable datasets, user-friendly interfaces, and comprehensive metadata and documentation. The IPUMS philosophy aligns closely with the FAIR principles of findability, accessibility, interoperability, and re-usability. IPUMS data have catalyzed knowledge generation across a wide range of social science and other disciplines, as evidenced by the large volume of publications and other products created by the vast IPUMS user community.

On the Feasibility of Interoperable Schemes in Hand Biometrics

Science.gov (United States)

Morales, Aythami; González, Ester; Ferrer, Miguel A.

2012-01-01

Personal recognition through hand-based biometrics has attracted the interest of many researchers in the last twenty years. A significant number of proposals based on different procedures and acquisition devices have been published in the literature. However, comparisons between devices and their interoperability have not been thoroughly studied. This paper tries to fill this gap by proposing procedures to improve the interoperability among different hand biometric schemes. The experiments were conducted on a database made up of 8,320 hand images acquired from six different hand biometric schemes, including a flat scanner, webcams at different wavelengths, high quality cameras, and contactless devices. Acquisitions on both sides of the hand were included. Our experiment includes four feature extraction methods which determine the best performance among the different scenarios for two of the most popular hand biometrics: hand shape and palm print. We propose smoothing techniques at the image and feature levels to reduce interdevice variability. Results suggest that comparative hand shape offers better performance in terms of interoperability than palm prints, but palm prints can be more effective when using similar sensors. PMID:22438714

Towards a standard on evaluation of tactile/haptic interactions