WorldWideScience

Sample records for grc service grc

  1. Auditing and GRC automation in SAP

    CERN Document Server

    Chuprunov, Maxim

    2013-01-01

    Going beyond current literature, this book extends internal controls to efficiency and profitability. Offers an audit guide for an SAP ERP system, covers risks and control descriptions, and shows how to automate compliance management based on SAP GRC.

  2. Advanced Stirling Convertor Testing at GRC

    Science.gov (United States)

    Schifer, Nick; Oriti, Salvatore M.

    2013-01-01

    NASA Glenn Research Center (GRC) has been supporting development of the Advanced Stirling Radioisotope Generator (ASRG) since 2006. A key element of the ASRG project is providing life, reliability, and performance testing of the Advanced Stirling Convertor (ASC). The latest version of the ASC, deemed ASC-E3, is of a design identical to the forthcoming flight convertors. The first pair of ASC-E3 units was delivered in December 2012. GRC has begun the process of adding these units to the catalog of ongoing Stirling convertor operation. This process includes performance verification, which examines the data from various tests to validate the convertors performance to the product specification.

  3. Stirling technology development at NASA GRC

    Science.gov (United States)

    Thieme, Lanny G.; Schreiber, Jeffrey G.; Mason, Lee S.

    2002-01-01

    The Department of Energy, Stirling Technology Company (STC), and NASA Glenn Research Center (GRC) are developing a free-piston Stirling convertor for a high-efficiency Stirling Radioisotope Generator (SRG) for NASA Space Science missions. The SRG is being developed for multimission use, including providing electric power for unmanned Mars rovers and deep space missions. NASA GRC is conducting an in-house technology project to assist in developing the convertor for space qualification and mission implementation. Recent testing of 55-We Technology Demonstration Convertors (TDC's) built by STC includes mapping of a second pair of TDC's, single TDC testing, and TDC electromagnetic interference and electromagnetic compatibility characterization on a non-magnetic test stand. Launch environment tests of a single TDC without its pressure vessel to better understand the convertor internal structural dynamics and of dual-opposed TDC's with several engineering mounting structures with different natural frequencies have recently been completed. A preliminary life assessment has been completed for the TDC heater head, and creep testing of the IN718 material to be used for the flight convertors is underway. Long-term magnet aging tests are continuing to characterize any potential aging in the strength or demagnetization resistance of the magnets used in the linear alternator (LA). Evaluations are now beginning on key organic materials used in the LA and piston/rod surface coatings. GRC is also conducting finite element analyses for the LA, in part to look at the demagnetization margin on the permanent magnets. The world's first known integrated test of a dynamic power system with electric propulsion was achieved at GRC when a Hall-effect thruster was successfully operated with a free-piston Stirling power source. Cleveland State University is developing a multi-dimensional Stirling computational fluid dynamics code to significantly improve Stirling loss predictions and assist in

  4. 2017 Laser Diagnostics in Combustion GRC/GRS

    Science.gov (United States)

    2017-10-06

    scientists and engineers . The goal of GRC was to bring together scientists and engineers with a strong interest in laser-based combustion diagnostics to...processes. The GRS, held the weekend before the GRC, was organized to bring together emerging leaders in the field at an early stage in their careers ...coupled multi-scale combustion processes. The GRC on Laser Diagnostics in Combustion was designed to bring together scientists and engineers working at

  5. Turbine Seal Research at NASA GRC

    Science.gov (United States)

    Proctor, Margaret P.; Steinetz, Bruce M.; Delgado, Irebert R.; Hendricks, Robert C.

    2011-01-01

    Low-leakage, long-life turbomachinery seals are important to both Space and Aeronautics Missions. (1) Increased payload capability (2) Decreased specific fuel consumption and emissions (3) Decreased direct operating costs. NASA GRC has a history of significant accomplishments and collaboration with industry and academia in seals research. NASA's unique, state-of-the-art High Temperature, High Speed Turbine Seal Test Facility is an asset to the U.S. Engine / Seal Community. Current focus is on developing experimentally validated compliant, non-contacting, high temperature seal designs, analysis, and design methodologies to enable commercialization.

  6. 2009 Archaea: Ecology, Metabolism & Molecular Biology GRC

    Energy Technology Data Exchange (ETDEWEB)

    Furlow, Julie Maupin- [Univ. of Florida, Gainesville, FL (United States)

    2009-07-26

    Archaea, one of three major evolutionary lineages of life, are a fascinating and diverse group of microbes with deep roots overlapping those of eukaryotes. The focus of the 'Archaea: Ecology Metabolism & Molecular Biology' GRC conference expands on a number of emerging topics highlighting new paradigms in archaeal metabolism, genome function and systems biology; information processing; evolution and the tree of life; the ecology and diversity of archaea and their viruses; and industrial applications. The strength of this conference lies in its ability to couple a field with a rich history in high quality research with new scientific findings in an atmosphere of stimulating exchange. This conference remains an excellent opportunity for younger scientists to interact with world experts in this field.

  7. Application of Chemistry in Materials Research at NASA GRC

    Science.gov (United States)

    Kavandi, Janet L.

    2016-01-01

    Overview of NASA GRC Materials Development. New materials enabled by new chemistries offering unique properties and chemical processing techniques. Durability of materials in harsh environments requires understanding and modeling of chemical interaction of materials with the environment.

  8. Renewable Energy: Solar Fuels GRC and GRS

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, Nathan [California Inst. of Technology (CalTech), Pasadena, CA (United States); Gray, Nancy Ryan [Gordon Research Conferences, West Kingston, RI (United States)

    2010-02-26

    sources from a carbon-neutral source. Sunlight is by far the most abundant global carbon-neutral energy resource. More solar energy strikes the surface of the earth in one hour than is obtained from all of the fossil fuels consumed globally in a year. Sunlight may be used to power the planet. However, it is intermittent, and therefore it must be converted to electricity or stored chemical fuel to be used on a large scale. The 'grand challenge' of using the sun as a future energy source faces daunting challenges - large expanses of fundamental science and technology await discovery. A viable solar energy conversion scheme must result in a 10-50 fold decrease in the cost-to-efficiency ratio for the production of stored fuels, and must be stable and robust for a 20-30 year period. To reduce the cost of installed solar energy conversion systems to $0.20/peak watt of solar radiation, a cost level that would make them economically attractive in today's energy market, will require revolutionary technologies. This GRC seeks to present a forum for the underlying science needed to permit future generations to use the sun as a renewable and sustainable primary energy source. Speakers will discuss recent advances in homoogeneous and heterogeneous catalysis of multi-electron transfer processes of importance to solar fuel production, such as water oxidation and reduction, and carbon dioxide reduction. Speakers will also discuss advances in scaleably manufacturable systems for the capture and conversion of sunlight into electrical charges that can be readily coupled into, and utilized for, fuel production in an integrated system.

  9. Update on the NASA GRC Stirling Technology development project

    Science.gov (United States)

    Thieme, Lanny G.; Schreiber, Jeffrey G.

    2001-02-01

    The Department of Energy, NASA Glenn Research Center (GRC), and Stirling Technology Company (STC) are developing a free-piston Stirling convertor for a Stirling radioisotope power system (SRPS) to provide spacecraft on-board electric power for NASA deep space missions. The SRPS has recently been identified for potential use on the Europa Orbiter and Solar Probe Space Science missions. Stirling is also now being considered for unmanned Mars rovers. NASA GRC is conducting an in-house project to assist in developing the Stirling convertor for readiness for space qualification and mission implementation. As part of this continuing effort, the Stirling convertor will be further characterized under launch environment random vibration testing, methods to reduce convertor electromagnetic interference (EMI) will be developed, and an independent performance verification will be completed. Convertor life assessment and permanent magnet aging characterization tasks are also underway. Substitute organic materials for the linear alternator and piston bearing coatings for use in a high radiation environment have been identified and have now been incorporated in Stirling convertors built by STC for GRC. Electromagnetic and thermal finite element analyses for the alternator are also being conducted. This paper discusses the recent results and status for this NASA GRC in-house project. .

  10. Accomplishments in free-piston stirling tests at NASA GRC

    Science.gov (United States)

    Schreiber, Jeffrey G.; Skupinski, Robert C.

    2002-01-01

    A power system based on the Stirling Radioisotope Generator (SRG) has been identified for potential use on deep space missions, as well as for Mars rovers that may benefit from extended operation. The Department of Energy (DOE) has responsibility for developing the generator and the NASA Glenn Research Center (GRC) is supporting DOE in this effort. The generator is based on a free-piston Stirling power convertor that has been developed by the Stirling Technology Company (STC) under contract to DOE. The generator would be used as a high-efficiency alternative to the Radioisotope Thermoelectric Generators (RTGs) that have been used on many previous missions. The increased efficiency leads to a factor of 3 to 4 reduction in the inventory of plutonium required to heat the generator. GRC has been involved in the development of Stirling power conversion technology for over 25 years. The support provided to this project by GRC has many facets and draws upon the lab's scientists and engineers that have gained experience in applying their skills to the previous Stirling projects. This has created a staff with an understanding of the subtleties involved in applying their expertise to Stirling systems. Areas include materials, structures, tribology, controls, electromagnetic interference, permanent magnets, alternator analysis, structural dynamics, and cycle performance. One of the key areas of support to the project is in the performance testing of the free-piston Stirling convertors. Since these power convertors are the smallest, lowest power Stirling machines that have been tested at GRC, a new laboratory was equipped for this project. Procedures and test plans have been created, instrumentation and data systems developed, and Stirling convertors have been tested. This paper will describe the GRC test facility, the test procedures that are used, present some of the test results and outline plans for the future. .

  11. Aplicaciones del GRC en España y Argelia

    Directory of Open Access Journals (Sweden)

    Rodríguez Santiago, Jesús

    1986-09-01

    Full Text Available Not Available.Este artículo resume la experiencia obtenida en la utilización del mortero de cemento reforzado con fibra de vidrio (GRC en el campo de la construcción. Se describen en primer lugar las características del material y el proceso de fabricación en factoría de paneles de GRC. Se exponen a continuación algunas realizaciones llevadas a cabo con este material destacando, por su volumen y rapidez de ejecución, el conjunto de fachadas para edificios de viviendas, hospitales y centros escolares construidos en Argelia. También se comentan otras aplicaciones del GRC para la rehabilitación y decoración interior de edificios y para la construcción de elementos singulares. Finalmente, en el apartado de las conclusiones se menciona la necesidad de seguir investigando en el comportamiento a largo plazo de este material para poder aumentar su utilización en la construcción.

  12. Modification of General Research Corporation (GRC) Dynatup 8200 Drop Tower Rebounding Brake System

    Science.gov (United States)

    2016-08-01

    Rebounding Brake System by David Gray, Robert Kaste, and Bradley Lawrence Approved for public release; distribution is...Research Laboratory Modification of General Research Corporation (GRC) Dynatup 8200 Drop Tower Rebounding Brake System by David Gray and...Research Corporation (GRC) Dynatup 8200 Drop Tower Rebounding Brake System 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6

  13. Research on the Application of GRC Material in Exhibition Decoration Engineering

    Science.gov (United States)

    Cai, Yan

    2018-03-01

    Glass fiber reinforced cement (GRC) is a kind of new building material which is based on cement and take the alkali resistant glass fiber as reinforcing material. It is mainly used in building decoration project and it has many advantages like environmental protection, economical, practical modeling and others. This paper mainly studies the concrete application of GRC material in exhibition building decoration project.

  14. Aplicaciones del cemento reforzado con fibra de vidrio (GRC

    Directory of Open Access Journals (Sweden)

    Barros Llerena, Ángel

    1981-12-01

    Full Text Available Not available.

    El presente artículo tiene como objeto dar a conocer la utilización de fibras de vidrio como refuerzo de los cementos. Se da una breve reseña histórica, se mencionan sus características y comportamiento. Además se presenta un caso práctico y reciente de utilización en la fabricación de elementos de fachada del Estadio «Santiago Bernabéu» del Real Madrid C. de F., y se completa con una relación de los actuales y futuros usos del G.R.C. (glass reinforced cement, denominación inglesa del material más comúnmente utilizado.

  15. Advanced Manufacturing Technologies (AMT): Additive Manufactured Hot Fire Planning and Testing in GRC Cell 32

    Data.gov (United States)

    National Aeronautics and Space Administration — The objective of this project is to hot fire test an additively manufactured thrust chamber assembly TCA (injector and thrust chamber). GRC will install the...

  16. 'GRC1.5': Uptower Gearbox Testing to Investigate Bearing Axial Cracking

    Energy Technology Data Exchange (ETDEWEB)

    Keller, Jonathan; Vaes, David; McNiff, Brian

    2016-02-16

    This presentation focuses on the investigation of bearing axial cracking using the GRC1.5 uptower gearbox. Topics covered include the testing options considered, the project goal, and current and near-term activities.

  17. 2009 Cellulosomes, Cellulases & Other Carbohydrate Modifying Enzymes GRC

    Energy Technology Data Exchange (ETDEWEB)

    Gilbert, Harry [Univ. of Newcastle, Callaghan, NSW (Australia)

    2009-07-26

    your application/abstract to the GRC web site as soon as possible.

  18. Using information technology governance, risk management and compliance (GRC as a creator of business values – a case study

    Directory of Open Access Journals (Sweden)

    Sam Lubbe

    2011-08-01

    Full Text Available The relationship between Information Technology (IT Governance, Risk Management and Compliance (GRC and organisation business values continues to interest academics and practitioners (IT Governance Institute, 2003. Like governance, risk management and compliance generally, IT GRC is about the decision rights and accountabilities that encourage desirable behaviour in the use of IT (IT Governance Institute, 2003. A case study approach was used in an organisation with many business units. The organisation selected is a mining company, RioZim, situated in Zimbabwe. Data was collected from business units on IT issues and business values. The interviews centred on the IT GRC practices based on responsibility and authority for IT decision making. The results suggest that IT GRC does not adequately support business values. The study revealed that business values should drive IT GRC and IT GRC should be the responsibility of executives and all business units.

  19. The effect of silica fume and metakaolin on glass-fibre reinforced concrete (GRC ageing

    Directory of Open Access Journals (Sweden)

    Enfedaque Díaz, A.

    2010-12-01

    Full Text Available The deterioration of the mechanical properties of glassfibre reinforced concrete (GRC over time rules out the use of this material in load-bearing structures. While one possible solution to this problem is the addition of pozzolans or metakaolin to the cement mortar, the amounts needed to ensure GRC integrity raise its price to non-competitive levels. Experimental research has been conducted to analyze whether the addition of small amounts of silica fume or metakaolin can prevent or mitigate the ageing issue. Unfortunately, the findings indicate that the addition of small proportions of metakaolin or silica fume to GRC are ineffective in improving its long-term performance.

    Para el uso del mortero de cemento reforzado con fibras de vidrio (GRC en estructuras portantes se han de solucionar los problemas de reducción de las propiedades mecánicas que aparecen con el paso del tiempo. Estos problemas pueden ser solucionados mediante la adición de puzolanas o de metacaolín, a la pasta de mortero de cemento. Sin embargo, la cantidad de metacaolín que ha de ser añadida es elevada y el precio del GRC fabricado está fuera del mercado. Se ha realizado una campaña experimental que analiza si la adición de humo de sílice o de metacaolín en proporciones reducidas consigue evitar o paliar el problema del envejecimiento, que supone un freno al uso del GRC en elementos estructurales. Desgraciadamente, los resultados experimentales muestran que proporciones bajas de metacaolín o de humo de sílice no son efectivas para reducir el problema de pérdida de propiedades mecánicas.

  20. Wind Turbine Drivetrain Condition Monitoring During GRC Phase 1 and Phase 2 Testing

    Energy Technology Data Exchange (ETDEWEB)

    Sheng, S.; Link, H.; LaCava, W.; van Dam, J.; McNiff, B.; Veers, P.; Keller, J.; Butterfield, S.; Oyague, F.

    2011-10-01

    This report will present the wind turbine drivetrain condition monitoring (CM) research conducted under the phase 1 and phase 2 Gearbox Reliability Collaborative (GRC) tests. The rationale and approach for this drivetrain CM research, investigated CM systems, test configuration and results, and a discussion on challenges in wind turbine drivetrain CM and future research and development areas, will be presented.

  1. Workability of glass reinforced concrete (GRC) with granite and silica sand aggregates

    Science.gov (United States)

    Moceikis, R.; Kičaitė, A.; Keturakis, E.

    2017-10-01

    Glass fiber reinforced concrete (GRC) opens the door for lightweight and complex shaped innovative construction, adding architectural value to buildings. With panel thickness down to 15 mm, considerable amount of total loads and materials per square meter of facade can be saved, if compared to conventionally used 80 mm thickness outer layer in insulated precast concrete wall elements. Even though GRC is used for over 50 years in such countries as Great Britain, USA and Japan, there are very few examples and little research done in Eastern Europe with this building material. European Commission propagates sustainable design as commitment to energy efficiency, environmental stewardship and conservation. For this reason, GRC plays important role in mowing toward these goals. In this paper, GRC premix recipes including fine granite and silica sands, reinforced with 13mm length alkali resistant glass fibers are investigated. Two CEM I 52,5R cements with different particle sizes were used and severe water dissociation noticed in one of concrete mixes. Cement particle size distribution determined with laser diffraction particle analyser Cilas 1090LD. To determine modulus of rupture (M.O.R.) and limit of proportionality (L.O.P), plates thickness 15 and 20 mm were produced and tested for flexural resistance according to 4-point bending scheme. Concrete workability tests were made according EN 1170-1.

  2. Ultrasonic characterization of GRC with high percentage of fly ash substitution.

    Science.gov (United States)

    Genovés, V; Gosálbez, J; Miralles, R; Bonilla, M; Payá, J

    2015-07-01

    New applications of non-destructive techniques (NDT) with ultrasonic tests (attenuation and velocity by means of ultrasonic frequency sweeps) have been developed for the characterization of fibre-reinforced cementitious composites. According to new lines of research on glass-fibre reinforced cement (GRC) matrix modification, two similar GRC composites with high percentages of fly ash and different water/binder ratios will be studied. Conventional techniques have been used to confirm their low Ca(OH)(2) content (thermogravimetry), fibre integrity (Scanning Electron Microscopy), low porosity (Mercury Intrusion Porosimetry) and good mechanical properties (compression and four points bending test). Ultrasound frequency sweeps allowed the estimation of the attenuation and pulse velocity as functions of frequency. This ultrasonic characterization was correlated successfully with conventional techniques. Copyright © 2015 Elsevier B.V. All rights reserved.

  3. GRC: Composite material from an inorganic matrix reinforced with AR glass fibres

    Directory of Open Access Journals (Sweden)

    Comino Almenara, P. I.

    1996-06-01

    Full Text Available This article describes the historical background of Cem-FIL. Alkali Resistant Glass Fibre, as well as the composite characteristics of the element they generate: GRC. The most important advantages and properties of this type of Composite Material are also detailed.

    En este artículo se detallan cuáles son las bases históricas de las Fibras de Vidrio Álcali-Resistentes Cem-FIL así como las características del elemento compuesto que ellas generan: GRC. En este documento también se pueden encontrar indicaciones sobre las principales ventajas y propiedades de este tipo de Material Compuesto.

  4. 2014 Overview of NASA GRC Electrochemical Power and Energy Storage Technology

    Science.gov (United States)

    Reid, Concha M.

    2014-01-01

    Overview presentation to the IAPG Chemical Working Group meeting, discussing current electrochemical power and energy storage R and D at NASA GRC including missions, demonstrations, and reserch projects. Activities such as ISS Lithium-Ion Battery Replacements, the Advanced Exploration Systems Modular Power Systems project, Enabling Electric Aviation with Ultra-High Energy Litium Metal Batteries, Advanced Space Power Systems project, and SBIR STTR work, will be discussed.

  5. Advanced Manufacturing Technologies (AMT): Additive Manufactured Hot Fire Planning and Testing in GRC Cell 32 Project

    Science.gov (United States)

    Fikes, John C.

    2014-01-01

    The objective of this project is to hot fire test an additively manufactured thrust chamber assembly TCA (injector and thrust chamber). GRC will install the additively manufactured Inconel 625 injector, two additively manufactured (SLM) water cooled Cu-Cr thrust chamber barrels and one additively manufactured (SLM) water cooled Cu-Cr thrust chamber nozzle on the test stand in Cell 32 and perform hot fire testing of the integrated TCA.

  6. MAVEN Information Security Governance, Risk Management, and Compliance (GRC): Lessons Learned

    Science.gov (United States)

    Takamura, Eduardo; Gomez-Rosa, Carlos A.; Mangum, Kevin; Wasiak, Fran

    2014-01-01

    As the first interplanetary mission managed by the NASA Goddard Space Flight Center, the Mars Atmosphere and Volatile EvolutioN (MAVEN) had three IT security goals for its ground system: COMPLIANCE, (IT) RISK REDUCTION, and COST REDUCTION. In a multiorganizational environment in which government, industry and academia work together in support of the ground system and mission operations, information security governance, risk management, and compliance (GRC) becomes a challenge as each component of the ground system has and follows its own set of IT security requirements. These requirements are not necessarily the same or even similar to each other's, making the auditing of the ground system security a challenging feat. A combination of standards-based information security management based on the National Institute of Standards and Technology (NIST) Risk Management Framework (RMF), due diligence by the Mission's leadership, and effective collaboration among all elements of the ground system enabled MAVEN to successfully meet NASA's requirements for IT security, and therefore meet Federal Information Security Management Act (FISMA) mandate on the Agency. Throughout the implementation of GRC on MAVEN during the early stages of the mission development, the Project faced many challenges some of which have been identified in this paper. The purpose of this paper is to document these challenges, and provide a brief analysis of the lessons MAVEN learned. The historical information documented herein, derived from an internal pre-launch lessons learned analysis, can be used by current and future missions and organizations implementing and auditing GRC.

  7. Overview of Multi-kilowatt Free-Piston Stirling Power Conversion Research at GRC

    Science.gov (United States)

    Geng, Steven M.; Mason, Lee S.; Dyson, Rodger W.; Penswick, L. Barry

    2008-01-01

    As a step towards development of Stirling power conversion for potential use in Fission Surface Power (FSP) systems, a pair of commercially available 1 kW class free-piston Stirling convertors and a pair of commercially available pressure wave generators (which will be plumbed together to create a high power Stirling linear alternator test rig) have been procured for in-house testing at Glenn Research Center. Delivery of both the Stirling convertors and the linear alternator test rig is expected by October, 2007. The 1 kW class free-piston Stirling convertors will be tested at GRC to map and verify performance. The convertors will later be modified to operate with a NaK liquid metal pumped loop for thermal energy input. The high power linear alternator test rig will be used to map and verify high power Stirling linear alternator performance and to develop power management and distribution (PMAD) methods and techniques. This paper provides an overview of the multi-kilowatt free-piston Stirling power conversion work being performed at GRC.

  8. Overview of Multi-Kilowatt Free-Piston Stirling Power Conversion Research at GRC

    Science.gov (United States)

    Geng, Steven M.; Mason, Lee S.; Dyson, Rodger W.; Penswick, L. Barry

    2008-01-01

    As a step towards development of Stirling power conversion for potential use in Fission Surface Power (FSP) systems, a pair of commercially available 1 kW class free-piston Stirling convertors and a pair of commercially available pressure wave generators (which will be plumbed together to create a high power Stirling linear alternator test rig) have been procured for in-house testing at Glenn Research Center. Delivery of both the Stirling convertors and the linear alternator test rig is expected by October, 2007. The 1 kW class free-piston Stirling convertors will be tested at GRC to map and verify performance. The convertors will later be modified to operate with a NaK liquid metal pumped loop for thermal energy input. The high power linear alternator test rig will be used to map and verify high power Stirling linear alternator performance and to develop power management and distribution (PMAD) methods and techniques. This paper provides an overview of the multi-kilowatt free-piston Stirling power conversion work being performed at GRC.

  9. Reconfiguration of NASA GRC's Vacuum Facility 6 for Testing of Advanced Electric Propulsion System (AEPS) Hardware

    Science.gov (United States)

    Peterson, Peter Y.; Kamhawi, Hani; Huang, Wensheng; Yim, John T.; Haag, Thomas W.; Mackey, Jonathan A.; McVetta, Michael S.; Sorrelle, Luke T.; Tomsik, Thomas M.; Gilligan, Ryan P.; hide

    2018-01-01

    The NASA Hall Effect Rocket with Magnetic Shielding (HERMeS) 12.5 kW Hall thruster has been the subject of extensive technology maturation in preparation for development into a flight propulsion system. The HERMeS thruster is being developed and tested at NASA GRC and NASA JPL through support of the Space Technology Mission Directorate (STMD) and is intended to be used as the electric propulsion system on the Power and Propulsion Element (PPE) of the recently announced Deep Space Gateway (DSG). The Advanced Electric Propulsion System (AEPS) contract was awarded to Aerojet-Rocketdyne to develop the HERMeS system into a flight system for use by NASA. To address the hardware test needs of the AEPS project, NASA GRC launched an effort to reconfigure Vacuum Facility 6 (VF-6) for high-power electric propulsion testing including upgrades and reconfigurations necessary to conduct performance, plasma plume, and system level integration testing. Results of the verification and validation testing with HERMeS Technology Demonstration Unit (TDU)-1 and TDU-3 Hall thrusters are also included.

  10. An electrochemical study of the flow rate effect on the oxide film of SA106 Gr.C piping

    International Nuclear Information System (INIS)

    Hong, S. M.; Kim, J. H.; Kim, I. S.

    2002-01-01

    Effect of water flow rate on the oxide film of SA106 Gr.C piping was evaluated quantitatively through electrochemical method. It was carried out with weight change experiments, polarization tests, and EIS tests with rig that simulates water flow. Without water flow, the oxide film is so stable that it effectively blocks current exchange. With water flow, the oxide film was damaged and electrochemical current density and oxide film properties, C dl and R p were significantly changed

  11. Leak before break evaluation for main steam piping system made of SA106 Gr.C

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Kyoung Mo; Jee, Kye Kwang; Pyo, Chang Ryul; Ra, In Sik [Korea Power Engineering Company, Seoul (Korea, Republic of)

    1997-04-01

    The basis of the leak before break (LBB) concept is to demonstrate that piping will leak significantly before a double ended guillotine break (DEGB) occurs. This is demonstrated by quantifying and evaluating the leak process and prescribing safe shutdown of the plant on the basis of the monitored leak rate. The application of LBB for power plant design has reduced plant cost while improving plant integrity. Several evaluations employing LBB analysis on system piping based on DEGB design have been completed. However, the application of LBB on main steam (MS) piping, which is LBB applicable piping, has not been performed due to several uncertainties associated with occurrence of steam hammer and dynamic strain aging (DSA). The objective of this paper is to demonstrate the applicability of the LBB design concept to main steam lines manufactured with SA106 Gr.C carbon steel. Based on the material properties, including fracture toughness and tensile properties obtained from the comprehensive material tests for base and weld metals, a parametric study was performed as described in this paper. The PICEP code was used to determine leak size crack (LSC) and the FLET code was used to perform the stability assessment of MS piping. The effects of material properties obtained from tests were evaluated to determine the LBB applicability for the MS piping. It can be shown from this parametric study that the MS piping has a high possibility of design using LBB analysis.

  12. Effect of environment on the propagation of electromagnetic waves in GRC 408E digital radiorelay devices

    Directory of Open Access Journals (Sweden)

    Vojkan M. Radonjić

    2011-01-01

    Full Text Available Quality transmission of digital signals from a transmitting radio-relay device to a receiving one depends on the impact of environmental effects on the propagation of electromagnetic waves. In this paper some of the most important effects are explained and modeled, especially those characteristic for the frequency range within which the GRC 408E operates. The modeling resulted in the conclusions about the quality of transmission of digital signals in the GRC 408E radio-relay equipment. Propagation of electromagnetic waves A radio-relay link is achieved by direct electromagnetic waves, provided there is a line of sight between the transmitting and receiving antenna of a radio-relay device. Electromagnetic waves on the road are exposed to various environmental influences causing phenomena such as bending, reflection, refraction, absorption and multiple propagation. Due to these environmental effects, the quality of information transmission is not satisfactory and a radio-relay link is not reliable. The approach to the analysis of the quality of links in digital radiorelay devices is different from the one in analog radio-relay devices. Therefore, the quality is seen through errors in the received bit ( BER , the propagation conditions are taken into account, a reservation for the fading is determined by other means, etc.. Phenomena which accompany the propagation of electromagnetic waves in digital radio-relay links The propagation of direct EM waves is followed by the following phenomena: - attenuation due to propagation, - diffraction (changing table, - refraction (refraction, - reflection (refusing, - absorption (absorption and - multiple wave propagation. Each of these has a negative effect on the quality of the received signal at the receiving antenna of the radio-relay device. Attenuation due to propagation of electromagnetic waves The main parameter for evaluating the quality of radio-relay links is the level of the field at the reception

  13. 2008 GRC Iron Sulfur Enzymes-Conference to be held June 8-13, 2008

    Energy Technology Data Exchange (ETDEWEB)

    Cramer, Stephen [Univ. of California, Davis, CA (United States); Gray, Nancy Ryan [Gordon Research Conferences, West Kingston, RI (United States)

    2009-01-01

    Iron-sulfur proteins are among the most common and ancient enzymes and electron-transfer agents in nature. They play key roles in photosynthesis, respiration, and the metabolism of small molecules such as H2, CO, and N2. The Iron Sulfur Enzyme Gordon Research Conference evolved from an earlier GRC on Nitrogen Fixation that began in 1994. The scope of the current meeting has broadened to include all enzymes or metalloproteins in which Fe-S bonds play a key role. This year's meeting will focus on the biosynthesis of Fe-S clusters, as well as the structure and mechanism of key Fe-S enzymes such as hydrogenase, nitrogenase and its homologues, radical SAM enzymes, and aconitase-related enzymes. Recent progress on the role of Fe-S enzymes in health, disease, DNA/RNA-processing, and alternative bio-energy systems will also be highlighted. This conference will assemble a broad, diverse, and international group of biologists and chemists who are investigating fundamental issues related to Fe-S enzymes, on atomic, molecular, organism, and environmental scales. The topics to be addressed will include: Biosynthesis & Genomics of Fe-S Enzymes; Fundamental Fe-S Chemistry; Hydrogen and Fe-S Enzymes; Nitrogenase & Homologous Fe-S Enzymes; Fe-S Enzymes in Health & Disease; Radical SAM and Aconitase-Related Fe-S Enzymes; Fe-S Enzymes and Synthetic Analogues in BioEnergy; and Fe-S Enzymes in Geochemistry and the Origin of Life.

  14. Fraud in Rights and Contracts: A Review of Bankruptcy Case of Livent Inc. Based on Governance, Risk, and Compliance (GRC Framework

    Directory of Open Access Journals (Sweden)

    Samuel Anindyo Widhoyoko

    2017-05-01

    Full Text Available This research discussed the accounting scandal in the perspective of governance, risk, and compliance using Governance, Risk, and Compliance (GRC framework. Unlike other fraud’s framework, GRC framework combinedthree different aspects of business sustainability of reporting. The purpose of the research was to highlight early business fraud that usually initiated by the company in boosting up the revenue during the Initial public offering(IPO processes. When other research discussed the business’ fraud schemes through the document alteration, this research focused on a case showing how a business could make the wrong statement to the investors through real and lawful future contracts with unqualified audit opinion. Structurally, this research was done through the action research method in pointing out all the directors’ failures in their function to hold the fiduciary duty to exercise their responsibility. Based on the analysis with the accordance with the framework used, it is highlighted that directors in the aspect of (1 governance decisive, they fail to set proportional target, provide ethical value, and react positively to maintain the company sustainability; (2 compliance submissive, they do not submit the accounting standards through undisclosed third-party agreement, misrepresentation of revenue recognition, and mistreatment of expense omission; (3 risk preventive, they fail to assess the risk occurs from legal aspect of conflict of interest, long-term contractual and engagement risks, and insufficient future cash flow.

  15. Transient receptor potential ankyrin 1 receptor activation in vitro and in vivo by pro-tussive agents: GRC 17536 as a promising anti-tussive therapeutic.

    Directory of Open Access Journals (Sweden)

    Indranil Mukhopadhyay

    Full Text Available Cough is a protective reflex action that helps clear the respiratory tract which is continuously exposed to airborne environmental irritants. However, chronic cough presents itself as a disease in its own right and despite its global occurrence; the molecular mechanisms responsible for cough are not completely understood. Transient receptor potential ankyrin1 (TRPA1 is robustly expressed in the neuronal as well as non-neuronal cells of the respiratory tract and is a sensor of a wide range of environmental irritants. It is fast getting acceptance as a key biological sensor of a variety of pro-tussive agents often implicated in miscellaneous chronic cough conditions. In the present study, we demonstrate in vitro direct functional activation of TRPA1 receptor by citric acid which is routinely used to evoke cough in preclinical and clinical studies. We also show for the first time that a potent and selective TRPA1 antagonist GRC 17536 inhibits citric acid induced cellular Ca(+2 influx in TRPA1 expressing cells and the citric acid induced cough response in guinea pigs. Hence our data provides a mechanistic link between TRPA1 receptor activation in vitro and cough response induced in vivo by citric acid. Furthermore, we also show evidence for TRPA1 activation in vitro by the TLR4, TLR7 and TLR8 ligands which are implicated in bacterial/respiratory virus pathogenesis often resulting in chronic cough. In conclusion, this study highlights the potential utility of TRPA1 antagonist such as GRC 17536 in the treatment of miscellaneous chronic cough conditions arising due to diverse causes but commonly driven via TRPA1.

  16. 2009 Clusters, Nanocrystals & Nanostructures GRC

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Lai-Sheng [Washington State Univ., Pullman, WA (United States)

    2009-07-19

    For over thirty years, this Gordon Conference has been the premiere meeting for the field of cluster science, which studies the phenomena that arise when matter becomes small. During its history, participants have witnessed the discovery and development of many novel materials, including C60, carbon nanotubes, semiconductor and metal nanocrystals, and nanowires. In addition to addressing fundamental scientific questions related to these materials, the meeting has always included a discussion of their potential applications. Consequently, this conference has played a critical role in the birth and growth of nanoscience and engineering. The goal of the 2009 Gordon Conference is to continue the forward-looking tradition of this meeting and discuss the most recent advances in the field of clusters, nanocrystals, and nanostructures. As in past meetings, this will include new topics that broaden the field. In particular, a special emphasis will be placed on nanomaterials related to the efficient use, generation, or conversion of energy. For example, we anticipate presentations related to batteries, catalysts, photovoltaics, and thermoelectrics. In addition, we expect to address the controversy surrounding carrier multiplication with a session in which recent results addressing this phenomenon will be discussed and debated. The atmosphere of the conference, which emphasizes the presentation of unpublished results and lengthy discussion periods, ensures that attendees will enjoy a valuable and stimulating experience. Because only a limited number of participants are allowed to attend this conference, and oversubscription is anticipated, we encourage all interested researchers from academia, industry, and government institutions to apply as early as possible. An invitation is not required. We also encourage all attendees to submit their latest results for presentation at the poster sessions. We anticipate that several posters will be selected for 'hot topic' oral presentations. Because of the important role that students and postdocs play in the future of this field, we also anticipate to select several posters from young investigators for oral presentations.

  17. Stirling Technology Development at NASA GRC

    Science.gov (United States)

    Thieme, Lanny G.; Schreiber, Jeffrey G.; Mason, Lee S.

    2001-01-01

    The Department of Energy, Stirling Technology Company (STC), and NASA Glenn Research Center (NASA Glenn) are developing a free-piston Stirling convertor for a high efficiency Stirling Radioisotope Generator (SRG) for NASA Space Science missions. The SRG is being developed for multimission use, including providing electric power for unmanned Mars rovers and deep space missions. NASA Glenn is conducting an in-house technology project to assist in developing the convertor for space qualification and mission implementation. Recent testing of 55-We Technology Demonstration Convertors (TDCs) built by STC includes mapping of a second pair of TDCs, single TDC testing, and TDC electromagnetic interference and electromagnetic compatibility characterization on a nonmagnetic test stand. Launch environment tests of a single TDC without its pressure vessel to better understand the convertor internal structural dynamics and of dual-opposed TDCs with several engineering mounting structures with different natural frequencies have recently been completed. A preliminary life assessment has been completed for the TDC heater head, and creep testing of the IN718 material to be used for the flight convertors is underway. Long-term magnet aging tests are continuing to characterize any potential aging in the strength or demagnetization resistance of the magnets used in the linear alternator (LA). Evaluations are now beginning on key organic materials used in the LA and piston/rod surface coatings. NASA Glenn is also conducting finite element analyses for the LA, in part to look at the demagnetization margin on the permanent magnets. The world's first known integrated test of a dynamic power system with electric propulsion was achieved at NASA Glenn when a Hall-effect thruster was successfully operated with a free-piston Stirling power source. Cleveland State University is developing a multidimensional Stirling computational fluid dynamics code to significantly improve Stirling loss predictions and assist in identifying convertor areas for further improvements. This paper will update the status and results for these efforts.

  18. Stirling Technology Development at NASA GRC. Revised

    Science.gov (United States)

    Thieme, Lanny G.; Schreiber, Jeffrey G.; Mason, Lee S.

    2002-01-01

    The Department of Energy, Stirling Technology Company (STC), and NASA Glenn Research Center (NASA Glenn) are developing a free-piston Stirling convertor for a high-efficiency Stirling Radioisotope Generator (SRG) for NASA Space Science missions. The SRG is being developed for multimission use, including providing electric power for unmanned Mars rovers and deep space missions. NASA Glenn is conducting an in-house technology project to assist in developing the convertor for space qualification and mission implementation. Recent testing, of 55-We Technology Demonstration Convertors (TDC's) built by STC includes mapping, of a second pair of TDC's, single TDC testing, and TDC electromagnetic interference and electromagnetic compatibility characterization on a nonmagnetic test stand. Launch environment tests of a single TDC without its pressure vessel to better understand the convertor internal structural dynamics and of dual-opposed TDC's with several engineering mounting structures with different natural frequencies have recently been completed. A preliminary life assessment has been completed for the TDC heater head, and creep testing of the IN718 material to be used for the flight convertors is underway. Long-term magnet aging tests are continuing to characterize any potential aging in the strength or demagnetization resistance of the magnets used in the linear alternator (LA). Evaluations are now beginning on key organic materials used in the LA and piston/rod surface coatings. NASA Glenn is also conducting finite element analyses for the LA, in part to look at the demagnetization margin on the permanent magnets. The world's first known integrated test of a dynamic power system with electric propulsion was achieved at NASA Glenn when a Hall-effect thruster was successfully operated with a free-piston Stirling power source. Cleveland State University is developing a multidimensional Stirling computational fluid dynamics code to significantly improve Stirling loss predictions and assist in identifying convertor areas for further improvements. This paper will update the status and results for these efforts.

  19. 2016 Microbial Stress Response GRC/GRS

    Science.gov (United States)

    2016-09-13

    Communicate to Regulate Antimicrobial Peptide Resistance in Gram Positive Bacteria" 10:35 am - 10:40 am Discussion 10:40 am - 11:05 am Coffee Break 11...San Diego State University, USA) "A Tail of Phage and Tubeworms: How Do Bacteria Stimulate Animal Development?" 12:05 pm - 12:15 pm Discussion 12...Transcription Conflict in Bacteria" 9:20 pm - 9:30 pm Discussion Wednesday 7:30 am - 8:30 am Breakfast 9:00 am - 12:30 pm Genetic and Phenotypic Resistance

  20. Overview of Photovoltaic Calibration and Measurement Standards at GRC

    Science.gov (United States)

    Baraona, Cosmo; Snyder, David; Brinker, David; Bailey, Sheila; Curtis, Henry; Scheiman, David; Jenkins, Phillip

    2002-01-01

    Photovoltaic (PV) systems (cells and arrays) for spacecraft power have become an international market. This market demands accurate prediction of the solar array power output in space throughout the mission life of the spacecraft. Since the beginning of space flight, space-faring nations have independently developed methods to calibrate solar cells for power output in low Earth orbit (LEO). These methods rely on terrestrial, laboratory, or extraterrestrial light sources to simulate or approximate the air mass zero (AM0) solar intensity and spectrum.

  1. Library Services Funding Assessment

    Science.gov (United States)

    Lorig, Jonathan A.

    2004-01-01

    The Glenn Technical Library is a science and engineering library that primarily supports research activities at the Glenn Research Center, and provides selected services to researchers at all of the NASA research centers. Resources available in the library include books, journals, CD-ROMs, and access to various online sources, as well as live reference and inter-library loan services. The collection contains over 77,000 books, 800,000 research reports, and print or online access to over 1,400 journals. Currently the library operates within the Logistics and Technical Information Division, and is funded as an open-access resource within the GRC. Some of the research units at the GRC have recently requested that the library convert to a "pay-for-services" model, in which individual research units could fund only those journal subscriptions for which they have a specific need. Under this model, the library would always maintain a certain minimum level of pooled-expense services, including the ready reference and book collections, and inter-library loan services. Theoretically the "pay-for-services" model would encourage efficient financial allocation, and minimize the extent to which paid journal subscriptions go unused. However, this model also could potentially negate the benefits of group purchases for journal subscriptions and access. All of the major journal publishers offer package subscriptions that compare favorably in cost with the sum of individual subscription costs for a similar selection of titles. Furthermore, some of these subscription packages are "consortium" purchases that are funded collectively by the libraries at multiple NASA research centers; such consortia1 memberships would be difficult for the library to pay, if enough GRC research units were to withdraw their pooled contributions. cost of collectively-funded journal access with the cost of individual subscriptions. My primary task this summer is to create the cost dataset framework, and

  2. NASA GRC's High Pressure Burner Rig Facility and Materials Test Capabilities

    Science.gov (United States)

    Robinson, R. Craig

    1999-01-01

    The High Pressure Burner Rig (HPBR) at NASA Glenn Research Center is a high-velocity. pressurized combustion test rig used for high-temperature environmental durability studies of advanced materials and components. The facility burns jet fuel and air in controlled ratios, simulating combustion gas chemistries and temperatures that are realistic to those in gas turbine engines. In addition, the test section is capable of simulating the pressures and gas velocities representative of today's aircraft. The HPBR provides a relatively inexpensive. yet sophisticated means for researchers to study the high-temperature oxidation of advanced materials. The facility has the unique capability of operating under both fuel-lean and fuel-rich gas mixtures. using a fume incinerator to eliminate any harmful byproduct emissions (CO, H2S) of rich-burn operation. Test samples are easily accessible for ongoing inspection and documentation of weight change, thickness, cracking, and other metrics. Temperature measurement is available in the form of both thermocouples and optical pyrometery. and the facility is equipped with quartz windows for observation and video taping. Operating conditions include: (1) 1.0 kg/sec (2.0 lbm/sec) combustion and secondary cooling airflow capability: (2) Equivalence ratios of 0.5- 1.0 (lean) to 1.5-2.0 (rich), with typically 10% H2O vapor pressure: (3) Gas temperatures ranging 700-1650 C (1300-3000 F): (4) Test pressures ranging 4-12 atmospheres: (5) Gas flow velocities ranging 10-30 m/s (50-100) ft/sec.: and (6) Cyclic and steady-state exposure capabilities. The facility has historically been used to test coupon-size materials. including metals and ceramics. However complex-shaped components have also been tested including cylinders, airfoils, and film-cooled end walls. The facility has also been used to develop thin-film temperature measurement sensors.

  3. Concepts for Multi-Speed Rotorcraft Drive System - Status of Design and Testing at NASA GRC

    Science.gov (United States)

    Stevens, Mark A.; Lewicki, David G.; Handschuh, Robert F.

    2015-01-01

    In several studies and on-going developments for advanced rotorcraft, the need for variable/multi-speed capable rotors has been raised. Speed changes of up to 50 percent have been proposed for future rotorcraft to improve vehicle performance. A rotor speed change during operation not only requires a rotor that can perform effectively over the operating speed/load range, but also requires a propulsion system possessing these same capabilities. A study was completed investigating possible drive system arrangements that can accommodate up to a 50 percent speed change. Key drivers were identified from which simplicity and weight were judged as central. This paper presents the current status of two gear train concepts coupled with the first of two clutch types developed and tested thus far with focus on design lessons learned and areas requiring development. Also, a third concept is presented, a dual input planetary differential as leveraged from a simple planetary with fixed carrier.

  4. Fixed Base Modal Testing Using the NASA GRC Mechanical Vibration Facility

    Science.gov (United States)

    Staab, Lucas D.; Winkel, James P.; Suarez, Vicente J.; Jones, Trevor M.; Napolitano, Kevin L.

    2016-01-01

    The Space Power Facility at NASA's Plum Brook Station houses the world's largest and most powerful space environment simulation facilities, including the Mechanical Vibration Facility (MVF), which offers the world's highest-capacity multi-axis spacecraft shaker system. The MVF was designed to perform sine vibration testing of a Crew Exploration Vehicle (CEV)-class spacecraft with a total mass of 75,000 pounds, center of gravity (cg) height above the table of 284 inches, diameter of 18 feet, and capability of 1.25 gravity units peak acceleration in the vertical and 1.0 gravity units peak acceleration in the lateral directions. The MVF is a six-degree-of-freedom, servo-hydraulic, sinusoidal base-shake vibration system that has the advantage of being able to perform single-axis sine vibration testing of large structures in the vertical and two lateral axes without the need to reconfigure the test article for each axis. This paper discusses efforts to extend the MVF's capabilities so that it can also be used to determine fixed base modes of its test article without the need for an expensive test-correlated facility simulation.

  5. High Voltage Hybrid Electric Propulsion - Multilayered Functional Insulation System (MFIS) NASA-GRC

    Science.gov (United States)

    Lizcano, M.

    2017-01-01

    High power transmission cables pose a key challenge in future Hybrid Electric Propulsion Aircraft. The challenge arises in developing safe transmission lines that can withstand the unique environment found in aircraft while providing megawatts of power. High voltage AC, variable frequency cables do not currently exist and present particular electrical insulation challenges since electrical arcing and high heating are more prevalent at higher voltages and frequencies. Identifying and developing materials that maintain their dielectric properties at high voltage and frequencies is crucial.

  6. Advanced Motor Control Test Facility for NASA GRC Flywheel Energy Storage System Technology Development Unit

    Science.gov (United States)

    Kenny, Barbara H.; Kascak, Peter E.; Hofmann, Heath; Mackin, Michael; Santiago, Walter; Jansen, Ralph

    2001-01-01

    This paper describes the flywheel test facility developed at the NASA Glenn Research Center with particular emphasis on the motor drive components and control. A four-pole permanent magnet synchronous machine, suspended on magnetic bearings, is controlled with a field orientation algorithm. A discussion of the estimation of the rotor position and speed from a "once around signal" is given. The elimination of small dc currents by using a concurrent stationary frame current regulator is discussed and demonstrated. Initial experimental results are presented showing the successful operation and control of the unit at speeds up to 20,000 rpm.

  7. FY15 GRC CIF High-Power Full-Scale Annular Engine (AE) Demonstration

    Data.gov (United States)

    National Aeronautics and Space Administration — The performance, and development and infusion rates of in-space electric propulsion (EP) systems must be increased to increase mission operational capabilities....

  8. 2015 Soft Condensed Matter Physics: Self-Assembly and Active Matter GRC/GRS

    Science.gov (United States)

    2015-10-20

    Broad Institute of MIT and Harvard Poster Presenter Registered Beller, Daniel A Harvard University Poster Presenter Registered Bi, Dapeng Syracuse...Poster Presenter Registered Deforet, Maxime Memorial Sloan Kettering Cancer Center Poster Presenter Registered Del Gado, Emanuela Georgetown...Registered Dullens, Roel University of Oxford Poster Presenter Registered Fakhri, Nikta MIT Poster Presenter Registered Fan, Jing Harvard

  9. Background-Oriented Schlieren used in a hypersonic inlet test at NASA GRC

    Science.gov (United States)

    Clem, Michelle; Woike, Mark; Saunders, John

    2016-01-01

    Background Oriented Schlieren (BOS) is a derivative of the classical schlieren technology, which is used to visualize density gradients, such as shock wave structures in a wind tunnel. Changes in refractive index resulting from density gradients cause light rays to bend, resulting in apparent motion of a random background pattern. The apparent motion of the pattern is determined using cross-correlation algorithms (between no-flow and with-flow image pairs) producing a schlieren-like image. One advantage of BOS is its simplified setup which enables a larger field-of-view (FOV) than traditional schlieren systems. In the present study, BOS was implemented into the Combined Cycle Engine Large-Scale Inlet Mode Transition Experiment (CCE LIMX) in the 10x10 Supersonic Wind Tunnel at NASA Glenn Research Center. The model hardware for the CCE LIMX accommodates a fully integrated turbine based combined cycle propulsion system. To date, inlet mode transition between turbine and ramjet operation has been successfully demonstrated. High-speed BOS was used to visualize the behavior of the flow structures shock waves during unsteady inlet unstarts, a phenomenon known as buzz. Transient video images of inlet buzz were recorded for both the ramjet flow path (high speed inlet) and turbine flow path (low speed inlet). To understand the stability limits of the inlet, operation was pushed to the point of unstart and buzz. BOS was implemented in order to view both inlets simultaneously, since the required FOV was beyond the capability of the current traditional schlieren system. An example of BOS data (Images 1-6) capturing inlet buzz are presented.

  10. AN/GRC-171 Rivet Switch Multichannel UHF/AM Transceiver

    Science.gov (United States)

    1975-03-01

    1879CS/LGMG Arellano, Cayetno A Chief, ATC Operations 1879CS/ FFA Capt Rucker, William C. CMSgt McCallum, Duncan Control Tower Chief Contractor...9/* zs L-f-ZO 7s. to ZJ-S’ 59.9s GENERAL PURPOSE FORM AFCS iaoot/io«i . o.^...,«.., ,,,,„ i ,„„„ lIBS^pnnwWWIW^ Bpp ^BWTWRPIP»^ 4.3.15 AN

  11. 2012 THIN FILM AND SMALL SCALE MECHANICAL BEHAVIOR GRS/GRC, JULY 21-27, 2012

    Energy Technology Data Exchange (ETDEWEB)

    Balk, Thomas

    2012-07-27

    The mechanical behavior of materials with small dimension(s) is of both fundamental scientific interest and technological relevance. The size effects and novel properties that arise from changes in deformation mechanism have important implications for modern technologies such as thin films for microelectronics and MEMS devices, thermal and tribological coatings, materials for energy production and advanced batteries, etc. The overarching goal of the 2012 Gordon Research Conference on "Thin Film and Small Scale Mechanical Behavior" is to discuss recent studies and future opportunities regarding elastic, plastic and time-dependent deformation, as well as degradation and failure mechanisms such as fatigue, fracture and wear. Specific topics of interest include, but are not limited to: fundamental studies of physical mechanisms governing small-scale mechanical behavior; advances in test techniques for materials at small length scales, such as nanotribology and high-temperature nanoindentation; in-situ mechanical testing and characterization; nanomechanics of battery materials, such as swelling-induced phenomena and chemomechanical behavior; flexible electronics; mechanical properties of graphene and carbon-based materials; mechanical behavior of small-scale biological structures and biomimetic materials. Both experimental and computational work will be included in the oral and poster presentations at this Conference.

  12. FY15 GRC CIF -Sulfur Cathode for High-Energy Li-Sulfur Battery

    Data.gov (United States)

    National Aeronautics and Space Administration — Based on the Power Energy and Conversion Roadmap TA03 future NASA missions will require high specific energy battery technologies, > 400 Wh/kg. NASA's current...

  13. 2016 Multifunctional Materials and Structures: Science of Autonomic, Adaptive and Self-Sustaining Systems GRC

    Science.gov (United States)

    2016-02-23

    Design, Singapore) 7:30 pm - 7:35 pm Introduction by Discussion Leader 7:35 pm - 8:10 pm Anna Balazs (University of Pittsburgh, USA) "Designing...N University of Patras Poster Presenter Registered Balazs, Anna C University of Pittsburgh Speaker Registered Barth, Friedrich G. University of...Texas A&M University Attendee Registered Olson , Jeff Lockheed Martin Space Systems Company Poster Presenter Registered Peijs, Ton Queen Mary

  14. 2012 CORRELATED ELECTRON SYSTEMS GRC AND GRS, JUNE 23-29, 2012

    Energy Technology Data Exchange (ETDEWEB)

    Kivelson, Steven

    2012-06-29

    The 2012 Gordon Conference on Correlated Electron Systems will present cutting-edge research on emergent properties arising from strong electronic correlations. While we expect the discussion at the meeting to be wide-ranging, given the breadth of the title subject matter, we have chosen several topics to be the particular focus of the talks. These are New Developments in Single and Bilayer Graphene, Topological States of Matter, including Topological Insulators and Spin Liquids, the Interplay Between Magnetism and Unconventional Superconductivity, and Quantum Critical Phenomena in Metallic Systems. We also plan to have shorter sessions on Systems Far From Equilibrium, Low Dimensional Electron Fluids, and New Directions (which will primarily focus on new experimental methodologies and their interpretation).

  15. Small Business Innovation Research GRC Phase I, Phase II, and Post-Phase II Opportunity Assessment for 2015

    Science.gov (United States)

    Nguyen, Hung D.; Steele, Gynelle C.

    2016-01-01

    This report outlines the 2015 Small Business Innovation Research/Small Business Technology Transfer (SBIR/STTR) Phase I, Phase II, and Post-Phase II opportunity contract award results associated with NASA's Aeronautics Research Mission Directorate (ARMD), Human Exploration and Operations Mission Directorate (HEOMD), Science Mission Directorate (SMD), and Space Technology Mission Directorate (STMD) for NASA Glenn Research Center. The report also highlights the number of Phase I, Phase II, and Post-Phase II contracts awarded by mission directorate. The 2015 Phase I contract awards to companies in Ohio and their corresponding technologies are also discussed.

  16. An Assessment of the SEA Multi-Element Sensor for Liquid Water Content Calibration of the NASA GRC Icing Research Tunnel

    Science.gov (United States)

    Steen, Laura E.; Ide, Robert F.; Van Zante, Judith F.

    2015-01-01

    The NASA Glenn Icing Research tunnel has been using an Icing Blade technique to measure cloud liquid water content (LWC) since 1980. The IRT conducted tests with SEA Multi-Element sensors from 2009 to 2011 to assess their performance in measuring LWC. These tests revealed that the Multi-Element sensors showed some significant advantages over the Icing Blade, particularly at higher water contents, higher impingement rates, and large drop sizes. Results of these and other tests are presented here.

  17. An Assessment of the Icing Blade and the SEA Multi-Element Sensor for Liquid Water Content Calibration of the NASA GRC Icing Research Tunnel

    Science.gov (United States)

    Steen, Laura E.; Ide, Robert F.; Van Zante, Judith Foss

    2017-01-01

    The Icing Research Tunnel at NASA Glenn has recently switched to from using the Icing Blade to using the SEA Multi-Element Sensor (also known as the multi-wire) for its calibration of cloud liquid water content. In order to perform this transition, tests were completed to compare the Multi-Element Sensor to the Icing Blade, particularly with respect to liquid water content, airspeed, and drop size. The two instruments were found to compare well for the majority of Appendix C conditions. However, it was discovered that the Icing Blade under-measures when the conditions approach the Ludlam Limit. This paper also describes data processing procedures for the Multi-Element Sensor in the IRT, including collection efficiency corrections, mounting underneath a splitter plate, and correcting for a jump in the compensation wire power. Further data is presented to describe the repeatability of the IRT with the Multi-Element sensor, health-monitoring checks for the instrument, and a sensing-element configuration comparison.

  18. An Overview of Prognosis Health Management Research at GRC for Gas Turbine Engine Structures With Special Emphasis on Deformation and Damage Modeling

    Science.gov (United States)

    Arnold, Steven M.; Goldberg, Robert K.; Lerch, Bradley A.; Saleeb, Atef F.

    2009-01-01

    Herein a general, multimechanism, physics-based viscoelastoplastic model is presented in the context of an integrated diagnosis and prognosis methodology which is proposed for structural health monitoring, with particular applicability to gas turbine engine structures. In this methodology, diagnostics and prognostics will be linked through state awareness variable(s). Key technologies which comprise the proposed integrated approach include 1) diagnostic/detection methodology, 2) prognosis/lifing methodology, 3) diagnostic/prognosis linkage, 4) experimental validation and 5) material data information management system. A specific prognosis lifing methodology, experimental characterization and validation and data information management are the focal point of current activities being pursued within this integrated approach. The prognostic lifing methodology is based on an advanced multi-mechanism viscoelastoplastic model which accounts for both stiffness and/or strength reduction damage variables. Methods to characterize both the reversible and irreversible portions of the model are discussed. Once the multiscale model is validated the intent is to link it to appropriate diagnostic methods to provide a full-featured structural health monitoring system.

  19. Experience of German Red Cross blood donor services with nucleic acid testing: results of screening more than 30 million blood donations for human immunodeficiency virus-1, hepatitis C virus, and hepatitis B virus.

    Science.gov (United States)

    Hourfar, Michael K; Jork, Christine; Schottstedt, Volkmar; Weber-Schehl, Marijke; Brixner, Veronika; Busch, Michael P; Geusendam, Geert; Gubbe, Knut; Mahnhardt, Christina; Mayr-Wohlfart, Uschi; Pichl, Lutz; Roth, W Kurt; Schmidt, Michael; Seifried, Erhard; Wright, David J

    2008-08-01

    The risk of transfusion-transmitted human immunodeficiency virus-1 (HIV-1), hepatitis C virus (HCV), and hepatitis B virus (HBV) infections is predominantly attributable to donations given during the early stage of infection when diagnostic tests may fail. In 1997, nucleic acid amplification technique (NAT)-testing was introduced at the German Red Cross (GRC) blood donor services to reduce this diagnostic window period (WP). A total of 31,524,571 blood donations collected from 1997 through 2005 were screened by minipool NAT, predominantly with pool sizes of 96 donations. These donations cover approximately 80 percent of all the blood collected in Germany during that period. Based on these data, the WP risk in the GRC blood donor population was estimated by using a state-of-the-art mathematic model. During the observation period, 23 HCV, 7 HIV-1, and 43 HBV NAT-only-positive donations were detected. On the basis of these data and estimated pre-NAT infectious WPs, the residual risk per unit transfused was estimated at 1 in 10.88 million for HCV (95% confidence interval [CI], 7.51-19.72 million), 1 in 4.30 million for HIV-1 (95% CI, 2.39-21.37 million), and 1 in 360,000 for HBV (95% CI, 0.19-3.36 million). Based on observed cases of breakthrough infections, the risk of transfusion-related infections may be even lower. The risk of a blood recipient becoming infected with HCV, HIV-1, or HBV has reached an extremely low level. Introduction of individual donation testing for HCV and HIV-1 would have a marginal effect on interception of WP donations.

  20. [The Engineering and Technical Services Directorate at the Glenn Research Center

    Science.gov (United States)

    Moon, James

    2004-01-01

    My name is James Moon and I am a senior at Tennessee State University where my major is Aeronautical and Industrial Technology with a concentration in industrial electronics. I am currently serving my internship in the Engineering and Technical Services Directorate at the Glenn Research Center (GRC). The Engineering and Technical Service Directorate provides the services and infrastructure for the Glenn Research Center to take research concepts to reality. They provide a full range of integrated services including engineering, advanced prototyping and testing, facility management, and information technology for NASA, industry, and academia. Engineering and Technical Services contains the core knowledge in Information Technology (IT). This includes data systems and analysis, inter and intranet based systems design and data security. Including the design and development of embedded real-time s o h a r e applications for flight and supporting ground systems, Engineering and Technical Services provide a wide range of IT services and products specific to the Glenn Research Center research and engineering community. In the 7000 Directorate I work directly in the 7611 organization. This organization is known as the Aviation Environments Technical Branch. My mentor is Vincent Satterwhite who is also the Branch Chief of the Aviation Environments Technical Branch. In this branch, I serve as the Assistant program manager of the Engineering Technology Program. The Engineering Technology Program (ETP) is one of three components of the High School L.E.R.C.I.P. This is an Agency-sponsored, eight-week research-based apprenticeship program designed to attract traditionally underrepresented high school students that demonstrate an aptitude for and interest in mathematics, science, engineering, and technology.

  1. Application of Glass Fiber Reinforced Cement in Exhibition Decoration Project

    Science.gov (United States)

    Wang, Yao

    2018-02-01

    Through the study of GRC material and its application field, the aesthetic characteristics and functional characteristics of GRC materials are demonstrated. The decorative application and technology of GRC material in an art exhibition center are highlighted. The design, application and construction technology of GRC curtain wall and ceiling board in the interior and exterior decoration of art exhibition hall are discussed in detail. The unique advantages of GRC materials in exhibition engineering decoration are fully reflected. In practical design application, the application principle and method are summarized, and an application procedure is formed. The research proves that GRC materials in the art of building decoration engineering has an underrated advantage.

  2. High Mobility, High Life Wheels for Mars

    Data.gov (United States)

    National Aeronautics and Space Administration — GRC will build Mars spring tires based on JPL requirements. GRC will evaluate tractive performance. JPL will conduct life cycle testing and load analysis.

  3. Reflections on Centaur Upper Stage Integration by the NASA Lewis (Glenn) Research Center

    Science.gov (United States)

    Graham, Scott R.

    2015-01-01

    The NASA Glenn (then Lewis) Research Center (GRC) led several expendable launch vehicle (ELV) projects from 1963 to 1998, most notably the Centaur upper stage. These major, comprehensive projects included system management, system development, integration (both payload and stage), and launch operations. The integration role that GRC pioneered was truly unique and highly successful. Its philosophy, scope, and content were not just invaluable to the missions and vehicles it supported, but also had significant Agency-wide benefits. An overview of the NASA Lewis Research Center (now the NASA Glenn Research Center) philosophy on ELV integration is provided, focusing on Atlas/Centaur, Titan/Centaur, and Shuttle/Centaur vehicles and programs. The necessity of having a stable, highly technically competent in-house staff is discussed. Significant depth of technical penetration of contractor work is another critical component. Functioning as a cohesive team was more than a concept: GRC senior management, NASA Headquarters, contractors, payload users, and all staff worked together. The scope, content, and history of launch vehicle integration at GRC are broadly discussed. Payload integration is compared to stage development integration in terms of engineering and organization. Finally, the transition from buying launch vehicles to buying launch services is discussed, and thoughts on future possibilities of employing the successful GRC experience in integrating ELV systems like Centaur are explored.

  4. Copper-mediated reductive dechlorination by green rust intercalated with dodecanoate

    DEFF Research Database (Denmark)

    Huang, Lizhi; Yin, Zhou; Cooper, Nicola G.A.

    2018-01-01

    A layered FeII-FeIII hydroxide (green rust, GR) was intercalated with dodecanoate (known as GRC12) and then amended with CuII (GRC12(Cu)) before reaction with chloroform (CF), carbon tetrachloride (CT), trichloroethylene (TCE) or tetrachloroethylene (PCE). Reduction of CT by GRC12(Cu) was 37 times...

  5. Getting Your Ducks in a Row: IT Governance, Risk, and Compliance Programs in Higher Education

    Science.gov (United States)

    Bichsel, Jacqueline; Feehan, Patrick

    2014-01-01

    Higher education IT governance, risk, and compliance (GRC) programs are in the development stage. Few institutions have all three programs in place, and many institutions are unclear where they should start when instituting or maturing their IT GRC programs. In addition, they are often uncertain as to whether GRC programs should be developed in…

  6. Heated Tube Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Heated Tube Facility at NASA GRC investigates cooling issues by simulating conditions characteristic of rocket engine thrust chambers and high speed airbreathing...

  7. Services

    International Nuclear Information System (INIS)

    Hardeman, F.

    1998-01-01

    The objectives of the services section is (1) to offer complete services in health-physics measurements according to international quality standards, (2) to improve continuously these measurement techniques and to follow up international recommendations and legislation concerning the surveillance of workers, (3) to support and advise nuclear and non-nuclear industry on problems of radioactive contamination. Achievements related to gamma spectrometry, whole-body counting, beta and alpha spectrometry, dosimetry, radon measurements, calibration, instrumentation, and neutron activation analysis are described

  8. Morphological Constraints on Cerebellar Granule Cell Combinatorial Diversity.

    Science.gov (United States)

    Gilmer, Jesse I; Person, Abigail L

    2017-12-13

    Combinatorial expansion by the cerebellar granule cell layer (GCL) is fundamental to theories of cerebellar contributions to motor control and learning. Granule cells (GrCs) sample approximately four mossy fiber inputs and are thought to form a combinatorial code useful for pattern separation and learning. We constructed a spatially realistic model of the cerebellar GCL and examined how GCL architecture contributes to GrC combinatorial diversity. We found that GrC combinatorial diversity saturates quickly as mossy fiber input diversity increases, and that this saturation is in part a consequence of short dendrites, which limit access to diverse inputs and favor dense sampling of local inputs. This local sampling also produced GrCs that were combinatorially redundant, even when input diversity was extremely high. In addition, we found that mossy fiber clustering, which is a common anatomical pattern, also led to increased redundancy of GrC input combinations. We related this redundancy to hypothesized roles of temporal expansion of GrC information encoding in service of learned timing, and we show that GCL architecture produces GrC populations that support both temporal and combinatorial expansion. Finally, we used novel anatomical measurements from mice of either sex to inform modeling of sparse and filopodia-bearing mossy fibers, finding that these circuit features uniquely contribute to enhancing GrC diversification and redundancy. Our results complement information theoretic studies of granule layer structure and provide insight into the contributions of granule layer anatomical features to afferent mixing. SIGNIFICANCE STATEMENT Cerebellar granule cells are among the simplest neurons, with tiny somata and, on average, just four dendrites. These characteristics, along with their dense organization, inspired influential theoretical work on the granule cell layer as a combinatorial expander, where each granule cell represents a unique combination of inputs

  9. Overview of NASA Glenn Aero/Mobile Communications Demonstrations

    Science.gov (United States)

    Brooks, David; Hoder, Doug; Wilkins, Ryan

    2004-01-01

    The Glenn Research Center at Lewis Field (GRC) has been involved with several other NASA field centers on various networking and RF communications demonstrations and experiments since 1998. These collaborative experiments investigated communications technologies new to aviation, such as wideband Ku satcom, L-band narrowband satcom, and IP (Internet Protocol), using commercial off-the-shelf (COTS) components These technologies can be used to distribute weather and hazard data, air traffic management and airline fleet management information, and passenger cabin Internet service.

  10. Overview of NASA Glenn Aero/Mobile Communication Demonstrations

    Science.gov (United States)

    Brooks, David; Hoder, Doug; Wilkins, Ryan

    2004-01-01

    The Glenn Research Center at Lewis Field (GRC) has been involved with several other NASA field centers on various networking and RF communications demonstrations and experiments since 1998. These collaborative experiments investigated communications technologies new to aviation, such as wideband Ku satcom, L-band narrowband satcom, and IP (Internet Protocol), using commercial off-the-shelf (COTS) components These technologies can be used to distribute weather and hazard data, air traffic management and airline fleet management information, and passenger cabin Internet service.

  11. US Army Armor Reference Data in Three Volumes. Volume I. The Army Division.

    Science.gov (United States)

    1981-01-01

    14 FADIO SET AN/GRC-106 . . . . .. . ........ . .. 1 ACHI EGUN 7.92--M VEH FIXS D. .............. 3 RADIO SET AN/GRC-160 ......... .................. 6...8 RADIAC SET AN/POR-27 ...................................... 1 MAC EGUN CAL .50 19 FLEX FOR CIOUJD aE ................... 8

  12. 14 CFR 1206.401 - Location of NASA Information Centers.

    Science.gov (United States)

    2010-01-01

    ... Locator (URL) addresses are as follows: (1) (HQ) http://www.hq.nasa.gov/office/pao/FOIA/; (2) (ARC) http://george.arc.nasa.gov/dx/FOIA/elec.html; (3) (DFRC) http://www.dfrc.nasa.gov/FOIA/readroom.html; (4) (GRC) http://www.grc.nasa.gov/WWW/FOIA/ReadingRm.htm; (5) (GSFC) http://genesis.gsfc.nasa.gov//foia/read-rm...

  13. African American Men, Gender Role Conflict, and Psychological Distress: The Role of Racial Identity

    Science.gov (United States)

    Wester, Stephen R.; Vogel, David L.; Wei, Meifen; McLain, Rodney

    2006-01-01

    Little research exists exploring the intersection of male gender role conflict (GRC), racial identity, and psychological distress. Accordingly, using a sample of 130 self-identified African American male participants, this study explored which aspects of racial identity mediated the relationship between GRC and psychological distress. Results…

  14. Research and Technology 1999

    Science.gov (United States)

    2000-01-01

    This report selectively summarizes the NASA Glenn Research Center's research and technology accomplishments for the fiscal year 1999. It comprises 130 short articles submitted by the staff scientists and engineers. The report is organized into four major sections: Aeronautics. Research and Technology, Space, and Engineering and Technical Services. A table of contents and an author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and where possible, reference documents are listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information about research at NASA Glenn, visit us on the World Wide Web (http://www.grc.nasa.gov). This document is available on the World Wide Web (http://www.grc.nasa.gov/WWW/RT/). For publicly available reports, visit the Glenn Technical Report Server (GLTRS) on the World Wide Web (http://gltrs.grc.nasa.gov/GLTRS/).

  15. Research and Technology 2002

    Science.gov (United States)

    Kim, Walter S.

    2003-01-01

    This report selectively summarizes NASA Glenn Research Center s research and technology accomplishments for fiscal year 2002. It comprises 166 short articles submitted by the staff scientists and engineers. The report is organized into five major sections: Aeronautics, Research and Technology, Space, Engineering and Technical Services, and Commercial Technology. A table of contents and author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and where possible, a reference document is listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information about research at Glenn, visit us on the World Wide Web (http://www.grc.nasa.gov). This document is available online (http://www.grc.nasa.gov/WWW/RT). For publicly available reports, visit the Glenn Technical Report Server (http://gltrs.grc.nasa.gov/GLTRS/).

  16. Research and Technology 2001

    Science.gov (United States)

    2002-01-01

    This report selectively summarizes NASA Glenn Research Center's research and technology accomplishments for fiscal year 2001. It comprises 156 short articles submitted by the staff scientists and engineers. The report is organized into five major sections: Aeronautics, Research and Technology, Space, Engineering and Technical Services, and Commercial Technology. A table of contents and author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and, where possible, a reference document is listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information about research at Glenn, visit us on the World Wide Web (http://www.grc.nasa.gov). This document is available online (http://www.grc.nasa.gov/www/RT). For publicly available reports, visit the Glenn Technical Report Server (http://gltrs.grc.nasa.gov/GLTRS).

  17. Application of Autonomous Spacecraft Power Control Technology to Terrestrial Microgrids

    Science.gov (United States)

    Dever, Timothy P.; Trase, Larry M.; Soeder, James F.

    2014-01-01

    This paper describes the potential of the power campus located at the NASA Glenn Research Center (GRC) in Cleveland, Ohio for microgrid development. First, the benefits provided by microgrids to the terrestrial power grid are described, and an overview of Technology Needs for microgrid development is presented. Next, GRC's work on development of autonomous control for manned deep space vehicles, which are essentially islanded microgrids, is covered, and contribution of each of these developments to the microgrid Technology Needs is detailed. Finally, a description is provided of GRC's existing physical assets which can be applied to microgrid technology development, and a phased plan for development of a microgrid test facility is presented.

  18. Integration of NASA-Developed Lifing Technology for PM Alloys into DARWIN (registered trademark)

    Science.gov (United States)

    McClung, R. Craig; Enright, Michael P.; Liang, Wuwei

    2011-01-01

    In recent years, Southwest Research Institute (SwRI) and NASA Glenn Research Center (GRC) have worked independently on the development of probabilistic life prediction methods for materials used in gas turbine engine rotors. The two organizations have addressed different but complementary technical challenges. This report summarizes a brief investigation into the current status of the relevant technology at SwRI and GRC with a view towards a future integration of methods and models developed by GRC for probabilistic lifing of powder metallurgy (P/M) nickel turbine rotor alloys into the DARWIN (Darwin Corporation) software developed by SwRI.

  19. Multi-Mission SDR, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Wireless transceivers used for NASA space missions have traditionally been highly custom and mission specific. Programs such as the GRC Space Transceiver Radio...

  20. In-Situ Resource Utilization: Carbon Dioxide Collection, Separation, and Pressurization

    Data.gov (United States)

    National Aeronautics and Space Administration — The atmosphere of Mars is predominantly carbon dioxide (95.5 percent), with nitrogen, argon, and trace gases comprising the remaining portion. KSC and GRC are...

  1. Atomic and Molecular Interactions

    International Nuclear Information System (INIS)

    2002-01-01

    The Gordon Research Conference (GRC) on Atomic and Molecular Interactions was held at Roger Williams University, Bristol, RI. Emphasis was placed on current unpublished research and discussion of the future target areas in this field

  2. Finite Internal Temperature Slide for Use with Colloid Experiments, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The Light Microscopy Module (LMM), developed and managed by NASA Glenn Research Center (GRC), is producing fascinating results. LMM will yield even more astonishing...

  3. Low Temperature Shape Memory Alloys for Adaptive, Autonomous Systems

    Data.gov (United States)

    National Aeronautics and Space Administration — The objective of this joint activity between Kennedy Space Center (KSC) and Glenn Research Center (GRC) is to develop and evaluate the applicability of 2-way SMAs in...

  4. Chemical Reactions at Surfaces. Final Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Freud, Hans-Joachim [Max-Planck-Gesellschaft, Berlin (Germany). Fritz-Haber-Inst.

    2003-02-21

    The Gordon Research Conference (GRC) on Chemical Reactions at Surfaces was held at Holiday Inn, Ventura, California, 2/16-21/03. Emphasis was placed on current unpublished research and discussion of the future target areas in this field.

  5. Fabrication Of Hybird Gas Turbine Disk Material System By Additive Manufacturing Project

    Data.gov (United States)

    National Aeronautics and Space Administration — AM offers the potential to be revolutionary for GRC hybrid disk concept as it: i) bypasses joining through direct deposition or “building” of the PX bore...

  6. Reverberant Acoustic Test Facility (RATF)

    Data.gov (United States)

    Federal Laboratory Consortium — The very large Reverberant Acoustic Test Facility (RATF) at the NASA Glenn Research Center (GRC), Plum Brook Station, is currently under construction and is due to...

  7. Organometallic Chemistry. Final Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Wolczanski, Peter [Cornell Univ., Ithaca, NY (United States)

    2003-07-14

    The Gordon Research Conference (GRC) on Organometallic Chemistry was held at Salve Regina, Newport, Rhode Island, 7/21-26/02. Emphasis was placed on current unpublished research and discussion of the future target areas in this field.

  8. Low Cost Radiator for Fission Power Thermal Control, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA Glenn Research Center (GRC) is developing fission power system technology for future space transportation and surface power applications. The early systems are...

  9. Low Cost Radiator for Fission Power Thermal Control, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA GRC is developing fission power system technology for future space transportation and surface power applications. The early systems are envisioned in the 10 to...

  10. Integrated Multidisciplinary Optimization Objects, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — During Phase I, M4 Engineering integrated a prototype system into OpenMDAO, a NASA GRC open-source framework. This prototype system was a proof-of-concept that M4...

  11. HiVHAc Thruster Wear and Structural Tests

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA GRC is developing a 4.5 kW-class Hall propulsion system. This system includes a long life high performance Hall Effect Thruster (HET), a highly efficient...

  12. Mammalian DNA Repair. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Wood, Richard D.

    2003-01-24

    The Gordon Research Conference (GRC) on Mammalian DNA Repair was held at Harbortown Resort, Ventura Beach, CA. Emphasis was placed on current unpublished research and discussion of the future target areas in this field.

  13. Advanced Manifolds for Improved Solid Oxide Electrolyzer Performance

    Data.gov (United States)

    National Aeronautics and Space Administration — In late 2013 NASA GRC proposed an in-situ resource utilization (ISRU) experiment on the Mars 2020 rover mission. This proposal was one of the two highest‐rated...

  14. Glass fiber reinforced concrete for terrestrial photovoltaic arrays

    Science.gov (United States)

    Maxwell, H.

    1979-01-01

    The use of glass-fiber-reinforced concrete (GRC) as a low-cost structural substrate for terrestrial solar cell arrays is discussed. The properties and fabrication of glass-reinforced concrete structures are considered, and a preliminary design for a laminated solar cell assembly built on a GRC substrate is presented. A total cost for such a photovoltaic module, composed of a Korad acrylic plastic film front cover, an aluminum foil back cover, an ethylene/vinyl acetate pottant/adhesive and a cotton fabric electrical isolator in addition to the GRC substrate, of $9.42/sq m is projected, which is less than the $11.00/sq m cost goal set by the Department of Energy. Preliminary evaluations are concluded to have shown the design capabilities and cost effectiveness of GRC; however, its potential for automated mass production has yet to be evaluated.

  15. PHOTOSYNTHESIS

    Energy Technology Data Exchange (ETDEWEB)

    Bryant, Donald A. [Pennsylvania State Univ., University Park, PA (United States)

    2002-06-21

    The Gordon Research Conference (GRC) on PHOTOSYNTHESIS was held at Roger Williams University, Bristol, RI. Emphasis was placed on current unpublished research and discussion of the future target areas in this field.

  16. Working With New Designs

    DEFF Research Database (Denmark)

    Visholm, Steen; Beck, Ulla Charlotte

    2014-01-01

    In this paper the learning concept of group relations conferences are discussed. The authors have worked with group relations conferences (GRC) in different contexts for many years-mainly as a part of educational programmes for managers and consultants (OPU at IGA Copenhagen, MPO at Roskilde...... University, and NAPSO). Seen from the horizon of their experience some of the basic concepts in the theories about GRC need clarifying, revision, and development. The GRC is a part of the learning from experience movement and as a consequence it stresses the underlying basis: learning is personal so everyone...... decides for themselves what makes sense and what does not. This principle sometimes work as a defence against a closer examination of the two questions: does GRCs provide relevant experiences to learn from, and what is it you learn or can expect to learn at a GRC. While two earlier papers (Beck & Visholm...

  17. Plasmid construction using recombination activity in the fission yeast Schizosaccharomyces pombe.

    Directory of Open Access Journals (Sweden)

    Ayako Chino

    Full Text Available BACKGROUND: Construction of plasmids is crucial in modern genetic manipulation. As of now, the common method for constructing plasmids is to digest specific DNA sequences with restriction enzymes and to ligate the resulting DNA fragments with DNA ligase. Another potent method to construct plasmids, known as gap-repair cloning (GRC, is commonly used in the budding yeast Saccharomyces cerevisiae. GRC makes use of the homologous recombination activity that occurs within the yeast cells. Due to its flexible design and efficiency, GRC has been frequently used for constructing plasmids with complex structures as well as genome-wide plasmid collections. Although there have been reports indicating GRC feasibility in the fission yeast Schizosaccharomyces pombe, this species is not commonly used for GRC as systematic studies of reporting GRC efficiency in S. pombe have not been performed till date. METHODOLOGY/PRINCIPAL FINDINGS: We investigated GRC efficiency in S. pombe in this study. We first showed that GRC was feasible in S. pombe by constructing a plasmid that contained the LEU2 auxotrophic marker gene in vivo and showed sufficient efficiency with short homology sequences (>25 bp. No preference was shown for the sequence length from the cut site in the vector plasmid. We next showed that plasmids could be constructed in a proper way using 3 DNA fragments with 70% efficiency without any specific selections being made. The GRC efficiency with 3 DNA fragments was dramatically increased >95% in lig4Delta mutant cell, where non-homologous end joining is deficient. Following this approach, we successfully constructed plasmid vectors with leu1+, ade6+, his5+, and lys1+ markers with the low-copy stable plasmid pDblet as a backbone by applying GRC in S. pombe. CONCLUSIONS/SIGNIFICANCE: We concluded that GRC was sufficiently feasible in S. pombe for genome-wide gene functional analysis as well as for regular plasmid construction. Plasmids with different

  18. Discovery of the First Germline-Restricted Gene by Subtractive Transcriptomic Analysis in the Zebra Finch, Taeniopygia guttata.

    Science.gov (United States)

    Biederman, Michelle K; Nelson, Megan M; Asalone, Kathryn C; Pedersen, Alyssa L; Saldanha, Colin J; Bracht, John R

    2018-05-21

    Developmentally programmed genome rearrangements are rare in vertebrates, but have been reported in scattered lineages including the bandicoot, hagfish, lamprey, and zebra finch (Taeniopygia guttata) [1]. In the finch, a well-studied animal model for neuroendocrinology and vocal learning [2], one such programmed genome rearrangement involves a germline-restricted chromosome, or GRC, which is found in germlines of both sexes but eliminated from mature sperm [3, 4]. Transmitted only through the oocyte, it displays uniparental female-driven inheritance, and early in embryonic development is apparently eliminated from all somatic tissue in both sexes [3, 4]. The GRC comprises the longest finch chromosome at over 120 million base pairs [3], and previously the only known GRC-derived sequence was repetitive and non-coding [5]. Because the zebra finch genome project was sourced from male muscle (somatic) tissue [6], the remaining genomic sequence and protein-coding content of the GRC remain unknown. Here we report the first protein-coding gene from the GRC: a member of the α-soluble N-ethylmaleimide sensitive fusion protein (NSF) attachment protein (α-SNAP) family hitherto missing from zebra finch gene annotations. In addition to the GRC-encoded α-SNAP, we find an additional paralogous α-SNAP residing in the somatic genome (a somatolog)-making the zebra finch the first example in which α-SNAP is not a single-copy gene. We show divergent, sex-biased expression for the paralogs and also that positive selection is detectable across the bird α-SNAP lineage, including the GRC-encoded α-SNAP. This study presents the identification and evolutionary characterization of the first protein-coding GRC gene in any organism. Copyright © 2018 Elsevier Ltd. All rights reserved.

  19. World Health Organization guideline development: an evaluation.

    Directory of Open Access Journals (Sweden)

    David Sinclair

    Full Text Available BACKGROUND: Research in 2007 showed that World Health Organization (WHO recommendations were largely based on expert opinion, rarely used systematic evidence-based methods, and did not follow the organization's own "Guidelines for Guidelines". In response, the WHO established a "Guidelines Review Committee" (GRC to implement and oversee internationally recognized standards. We examined the impact of these changes on WHO guideline documents and explored senior staff's perceptions of the new procedures. METHODS AND FINDINGS: We used the AGREE II guideline appraisal tool to appraise ten GRC-approved guidelines from nine WHO departments, and ten pre-GRC guidelines matched by department and topic. We interviewed 20 senior staff across 16 departments and analyzed the transcripts using the framework approach. Average AGREE II scores for GRC-approved guidelines were higher across all six AGREE domains compared with pre-GRC guidelines. The biggest changes were noted for "Rigour of Development" (up 37.6%, from 30.7% to 68.3% and "Editorial Independence" (up 52.7%, from 20.9% to 73.6%. Four main themes emerged from the interviews: (1 high standards were widely recognized as essential for WHO credibility, particularly with regard to conflicts of interest; (2 views were mixed on whether WHO needed a single quality assurance mechanism, with some departments purposefully bypassing the procedures; (3 staff expressed some uncertainties in applying the GRADE approach, with departmental staff concentrating on technicalities while the GRC remained concerned the underlying principles were not fully institutionalized; (4 the capacity to implement the new standards varied widely, with many departments looking to an overstretched GRC for technical support. CONCLUSIONS: Since 2007, WHO guideline development methods have become more systematic and transparent. However, some departments are bypassing the procedures, and as yet neither the GRC, nor the quality assurance

  20. A general strategy toward graphitized carbon coating on iron oxides as advanced anodes for lithium-ion batteries.

    Science.gov (United States)

    Ding, Chunyan; Zhou, Weiwei; Wang, Bin; Li, Xin; Wang, Dong; Zhang, Yong; Wen, Guangwu

    2017-08-25

    Integration of carbon materials with benign iron oxides is blazing a trail in constructing high-performance anodes for lithium-ion batteries (LIBs). In this paper, a unique general, simple, and controllable strategy is developed toward in situ uniform coating of iron oxide nanostructures with graphitized carbon (GrC) layers. The basic synthetic procedure only involves a simple dip-coating process for the loading of Ni-containing seeds and a subsequent Ni-catalyzed chemical vapor deposition (CVD) process for the growth of GrC layers. More importantly, the CVD treatment is conducted at a quite low temperature (450 °C) and with extremely facile liquid carbon sources consisting of ethylene glycol (EG) and ethanol (EA). The GrC content of the resulting hybrids can be controllably regulated by altering the amount of carbon sources. The electrochemical results reveal remarkable performance enhancements of iron oxide@GrC hybrids compared with pristine iron oxides in terms of high specific capacity, excellent rate and cycling performance. This can be attributed to the network-like GrC coating, which can improve not only the electronic conductivity but also the structural integrity of iron oxides. Moreover, the lithium storage performance of samples with different GrC contents is measured, manifesting that optimized electrochemical property can be achieved with appropriate carbon content. Additionally, the superiority of GrC coating is demonstrated by the advanced performance of iron oxide@GrC compared with its corresponding counterpart, i.e., iron oxides with amorphous carbon (AmC) coating. All these results indicate the as-proposed protocol of GrC coating may pave the way for iron oxides to be promising anodes for LIBs.

  1. Education, Technology, and Media: A Peak into My Summer Internship at NASA Glenn Research Center in Cleveland, Ohio

    Science.gov (United States)

    Moon, James

    2004-01-01

    My name is James Moon and I am a senor at Tennessee State University where my major is Aeronautical and Industrial Technology with a concentration in industrial electronics. I am currently serving my internship in the Engineering and Technical Services Directorate at the Glenn Research Center (GRC). The Engineering and Technical Service Directorate provides the services and infrastructure for the Glenn Research Center to take research concepts to reality. They provide a full range of integrated services including engineering, advanced prototyping and testing, facility management, and information technology for NASA, industry, and academia. Engineering and Technical Services contains the core knowledge in Information Technology (IT). This includes data systems and analysis, inter and intranet based systems design and data security. Including the design and development of embedded real-time sohare applications for flight and supporting ground systems, Engineering and Technical Services provide a wide range of IT services and products specific to the Glenn Research Center research and engineering community.

  2. Microstructure Modeling of 3rd Generation Disk Alloy

    Science.gov (United States)

    Jou, Herng-Jeng

    2008-01-01

    The objective of this initiative, funded by NASA's Aviation Safety Program, is to model, validate, and predict, with high fidelity, the microstructural evolution of third-generation high-refractory Ni-based disc superalloys during heat treating and service conditions. This initiative is a natural extension of the DARPA-AIM (Accelerated Insertion of Materials) initiative with GE/Pratt-Whitney and with other process simulation tools. Strong collaboration with the NASA Glenn Research Center (GRC) is a key component of this initiative and the focus of this program is on industrially relevant disk alloys and heat treatment processes identified by GRC. Employing QuesTek s Computational Materials Dynamics technology and PrecipiCalc precipitation simulator, physics-based models are being used to achieve high predictive accuracy and precision. Combining these models with experimental data and probabilistic analysis, "virtual alloy design" can be performed. The predicted microstructures can be optimized to promote desirable features and concurrently eliminate nondesirable phases that can limit the reliability and durability of the alloys. The well-calibrated and well-integrated software tools that are being applied under the proposed program will help gas turbine disk alloy manufacturers, processing facilities, and NASA, to efficiently and effectively improve the performance of current and future disk materials.

  3. Research and Technology 2000

    Science.gov (United States)

    2001-01-01

    This report selectively summarizes the NASA Glenn Research Center's research and technology accomplishments for the fiscal year 2000. It comprises 138 short articles submitted by staff scientists and engineers. The report is organized into five major sections: Aeronautics, Research and Technology, Space, Engineering and Technical Services, and Commercial Technology, a table of contents and an author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that was reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and where possible, reference documents are listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information about research at NASA Glenn, visit us on the World Wide Web (http://www.grc.nasa.gov). This document is available online (http://www.grc.nasa.gov/WWW/RT). For publicly available reports, visit the Glenn Technical Report Server (http://gltrs.gre.nasa.gov/GLTRS).

  4. Research & Technology 2005

    Science.gov (United States)

    2006-01-01

    This report selectively summarizes NASA Glenn Research Center's research and technology accomplishments for fiscal year 2005. It comprises 126 short articles submitted by the staff scientists and engineers. The report is organized into three major sections: Programs and Projects, Research and Technology, and Engineering and Technical Services. A table of contents and an author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and where possible, a reference document is listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information, visit Glenn's Web site at http://www.nasa.gov/glenn/. This document is available online (http://www.grc.nasa.gov/WWW/RT/). For publicly available reports, visit the Glenn Technical Report Server (http://gltrs.grc.nasa.gov).

  5. Research and Technology 2004

    Science.gov (United States)

    2005-01-01

    This report selectively summarizes NASA Glenn Research Center's research and technology accomplishments for fiscal year 2004. It comprises 133 short articles submitted by the staff scientists and engineers. The report is organized into three major sections: Programs and Projects, Research and Technology, and Engineering and Technical Services. A table of contents and an author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and where possible, a reference document is listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information, visit Glenn's Web site at http://www.nasa.gov/glenn/. This document is available online (http://www.grc.nasa.gov/WWW/RT/). For publicly available reports, visit the Glenn Technical Report Server (http://gltrs.grc.nasa.gov).

  6. Development and Testing of the Glenn Research Center Visitor's Center Grid-Tied Photovoltaic Power System

    Science.gov (United States)

    Eichenberg, Dennis J.

    2009-01-01

    The NASA Glenn Research Center (GRC) has developed, installed, and tested a 12 kW DC grid-tied photovoltaic (PV) power system at the GRC Visitor s Center. This system utilizes a unique ballast type roof mount for installing the photovoltaic panels on the roof of the Visitor s Center with no alterations or penetrations to the roof. The PV system has generated in excess of 15000 kWh since operation commenced in August 2008. The PV system is providing power to the GRC grid for use by all. Operation of the GRC Visitor s Center PV system has been completely trouble free. A grid-tied PV power system is connected directly to the utility distribution grid. Facility power can be obtained from the utility system as normal. The PV system is synchronized with the utility system to provide power for the facility, and excess power is provided to the utility. The project transfers space technology to terrestrial use via nontraditional partners. GRC personnel glean valuable experience with PV power systems that are directly applicable to various space power systems, and provides valuable space program test data. PV power systems help to reduce harmful emissions and reduce the Nation s dependence on fossil fuels. Power generated by the PV system reduces the GRC utility demand, and the surplus power aids the community. Present global energy concerns reinforce the need for the development of alternative energy systems. Modern PV panels are readily available, reliable, efficient, and economical with a life expectancy of at least 25 years. Modern electronics has been the enabling technology behind grid-tied power systems, making them safe, reliable, efficient, and economical with a life expectancy of at least 25 years. Based upon the success of the GRC Visitor s Center PV system, additional PV power system expansion at GRC is under consideration. The GRC Visitor s Center grid-tied PV power system was successfully designed and developed which served to validate the basic principles

  7. Design of a Glenn Research Center Solar Field Grid-Tied Photovoltaic Power System

    Science.gov (United States)

    Eichenberg, Dennis J.

    2009-01-01

    The NASA Glenn Research Center (GRC) designed, developed, and installed, a 37.5 kW DC photovoltaic (PV) Solar Field in the GRC West Area in the 1970s for the purpose of testing PV panels for various space and terrestrial applications. The PV panels are arranged to provide a nominal 120 VDC. The GRC Solar Field has been extremely successful in meeting its mission. The PV panels and the supporting electrical systems are all near their end of life. GRC has designed a 72 kW DC grid-tied PV power system to replace the existing GRC West Area Solar Field. The 72 kW DC grid-tied PV power system will provide DC solar power for GRC PV testing applications, and provide AC facility power for all times that research power is not required. A grid-tied system is connected directly to the utility distribution grid. Facility power can be obtained from the utility system as normal. The PV system is synchronized with the utility system to provide power for the facility, and excess power is provided to the utility for use by all. The project transfers space technology to terrestrial use via nontraditional partners. GRC personnel glean valuable experience with PV power systems that are directly applicable to various space power systems, and provide valuable space program test data. PV power systems help to reduce harmful emissions and reduce the Nation s dependence on fossil fuels. Power generated by the PV system reduces the GRC utility demand, and the surplus power aids the community. Present global energy concerns reinforce the need for the development of alternative energy systems. Modern PV panels are readily available, reliable, efficient, and economical with a life expectancy of at least 25 years. Modern electronics has been the enabling technology behind grid-tied power systems, making them safe, reliable, efficient, and economical with a life expectancy of at least 25 years. The report concludes that the GRC West Area grid-tied PV power system design is viable for a reliable

  8. Advanced Stirling Radioisotope Generator Engineering Unit 2 (ASRG EU2) Final Assembly

    Science.gov (United States)

    Oriti, Salvatore M.

    2015-01-01

    NASA Glenn Research Center (GRC) has recently completed the assembly of a unique Stirling generator test article for laboratory experimentation. Under the Advanced Stirling Radioisotope Generator (ASRG) flight development contract, NASA GRC initiated a task to design and fabricate a flight-like generator for in-house testing. This test article was given the name ASRG Engineering Unit 2 (EU2) as it was effectively the second engineering unit to be built within the ASRG project. The intent of the test article was to duplicate Lockheed Martin's qualification unit ASRG design as much as possible to enable system-level tests not previously possible at GRC. After the cancellation of the ASRG flight development project, the decision was made to continue the EU2 build, and make use of a portion of the hardware from the flight development project. GRC and Lockheed Martin engineers collaborated to develop assembly procedures, leveraging the valuable knowledge gathered by Lockheed Martin during the ASRG development contract. The ASRG EU2 was then assembled per these procedures at GRC with Lockheed Martin engineers on site. The assembly was completed in August 2014. This paper details the components that were used for the assembly, and the assembly process itself.

  9. Geothermal Information Dissemination and Outreach

    Energy Technology Data Exchange (ETDEWEB)

    Clutter, Ted J. [Geothermal Resources Council (United States)

    2005-02-18

    Project Purpose. To enhance technological and topical information transfer in support of industry and government efforts to increase geothermal energy use in the United States (power production, direct use, and geothermal groundsource heat pumps). Project Work. GRC 2003 Annual Meeting. The GRC convened the meeting on Oct. 12-15, 2003, at Morelia's Centro de Convenciones y ExpoCentro in Mexico under the theme, International Collaboration for Geothermal Energy in the Americas. The event was also sponsored by the Comision Federal de Electricidad. ~600 participants from more than 20 countries attended the event. The GRC convened a Development of Geothermal Projects Workshop and Geothermal Exploration Techniques Workshop. GRC Field Trips included Los Azufres and Paricutin Volcano on Oct. 11. The Geothermal Energy Association (Washington, DC) staged its Geothermal Energy Trade Show. The Annual Meeting Opening Session was convened on Oct. 13, and included the governor of Michoacan, the Mexico Assistant Secretary of Energy, CFE Geothermal Division Director, DOE Geothermal Program Manager, and private sector representatives. The 2003 Annual Meeting attracted 160 papers for oral and poster presentations. GRC 2004. Under the theme, Geothermal - The Reliable Renewable, the GRC 2004 Annual Meeting convened on Aug. 29-Sept. 1, 2004, at the Hyatt Grand Champions Resort at Indian Wells, CA. Estimated total attendance (including Trade Show personnel, guests and accompanying persons) was ~700. The event included a workshop, Geothermal Production Well Pump Installation, Operation and Maintenance. Field trips went to Coso/Mammoth and Imperial Valley/Salton Sea geothermal fields. The event Opening Session featured speakers from the U.S. Department of Energy, U.S. Department of the Interior, and the private sector. The Geothermal Energy Association staged its Geothermal Energy Trade Show. The Geothermal Education Office staged its Geothermal Energy Workshop. Several local radio and

  10. Learning From Experience

    DEFF Research Database (Denmark)

    Visholm, Steen; Beck, Ulla Charlotte

    2014-01-01

    University and NAPSO2). Seen from the horizon of their experience some of the basic concepts in the theories about GRC need clarifying, revision, and development. The GRC is a part of the learning from experience movement and as a consequence it stresses the underlying basis: learning is personal so everyone...... presented and discussed and two later contributions are presented: Barry Palmer's theory (Palmer, 1979) and Junell Silver and Ruthellen Josselson's study (Silver & Josselson, 2010). The learning concepts of the GRCs are found to be too general and too far from organisational life. As an attempt to move......In this paper the learning concept of group relation's conferences are discussed. The authors have worked with group relations conferences (GRC) in different contexts for many years-mainly as a part of educational programmes for managers and consultants (OPU at IGA Copenhagen, MPO at Roskilde...

  11. Overview of NASA Magnet and Linear Alternator Research Efforts

    Science.gov (United States)

    Geng, Steven M.; Niedra, Janis M.; Schwarze, Gene E.

    2005-02-01

    The Department of Energy, Lockheed Martin, Stirling Technology Company, and NASA Glenn Research Center are developing a high-efficiency, 110 watt Stirling Radioisotope Generator (SRG110) for NASA Space Science missions. NASA Glenn is conducting in-house research on rare earth permanent magnets and on linear alternators to assist in developing a free-piston Stirling convertor for the SRG110 and for developing advanced technology. The permanent magnet research efforts include magnet characterization, short-term magnet aging tests, and long-term magnet aging tests. Linear alternator research efforts have begun just recently at GRC with the characterization of a moving iron type linear alternator using GRC's alternator test rig. This paper reports on the progress and future plans of GRC's magnet and linear alternator research efforts.

  12. Army 86 Cost Sensitivity Analysis.

    Science.gov (United States)

    1980-05-01

    NI VI AN/PVS-4 W/IMG 5 Q15414 RADAR ST AN/MPQ-4A LP 25 Q16110 RADAR SET AN/PPS- SALP 773 Q34308 RADIO SET AN/GRC-160 191 Q45779 RADIO SET AN/VRC-12 654...VI AN/PVS-4 W/ING 5 Q15414 RADAR ST AN/MPQ-4A LP 25 Q16110 RADAR SET AN/PPS- SALP 592 Q34308 RADIO SET AN/GRC-160 555 Q38299 RADIO SET AN/PRC-25 474...PVS-4 W/IMG Q15414 RADAR ST AN/MPQ-4A LP Q16110 RADAR SET AN/PPS- SALP Q34308 RADIO SET AN/GRC-160 Q38299 RADIO SET AN/PRC-25 Q45779 RADIO SET AN/VRC-12

  13. Communications Related to Weather Information Handling and Dissemination

    Science.gov (United States)

    Dhas, Chris

    2000-01-01

    This report summarizes the tasking contained in the Statement of Work and describes the results of the project. In addition, it addresses the principles, procedures, and methods of application that would be generally applicable to using the results of the project. NASA Glenn Research Center (GRC) is involved in the Aviation Weather Information (AWIN) Program, which has a goal of reducing the aircraft accident rate, by a factor of five within 10 years and by a factor of 10 within 20 years. GRC's effort concentrates on the communications means needed to disseminate effective weather data. GRC's focus in on developing new technologies and techniques to support the digital communication of weather information between airborne and ground-based users.

  14. Common issues raised during the quality assurance process of WHO guidelines: a cross-sectional study.

    Science.gov (United States)

    Porgo, Teegwendé V; Ferri, Mauricio; Norris, Susan L

    2018-02-07

    In 2007, WHO established the Guidelines Review Committee (GRC) to ensure that WHO guidelines adhere to the highest international standards. The GRC reviews guideline proposals and final guidelines. The objectives of this study were to examine the rates of and reasons for conditional approval and non-approval of documents submitted for the first time to the GRC, and calculate the time intervals and numbers of submissions to achieve approval for documents conditionally approved or not approved at first submission. All initial submissions to the GRC between 2014 and 2017 were examined. Data were extracted from the GRC's records of written comments and discussions. Of a total of 85 proposals and 88 final guidelines, 32 (37.6%) proposals and 37 (42.0%) final guidelines were conditionally approved, and 15 (17.6%) proposals and 28 (31.8%) final guidelines were not. For both conditionally approved and not approved proposals, the most frequent reasons were suboptimal composition or inadequate description of the guideline contributor groups (in all proposals), followed by inadequate formulation of key questions (in 90.6% of conditionally approved proposals and all not approved proposals). For both conditionally approved and not approved final guidelines, the most frequent reasons were problems with recommendations (in all final guidelines), followed by inappropriate methods for evidence retrieval or an inadequate description thereof (in all conditionally approved final guidelines and 75.0% of not approved final guidelines). The median time to achieve approval was 2 months for proposals and 1-2 months for final guidelines. The median number of submissions was 2 for proposals and 2-2.5 for final guidelines. The GRC implements a rigorous quality assurance process and identifies problems with a significant percentage of initial submissions. WHO needs to continuously evaluate its guideline development processes to inform effective quality improvement measures and optimise the

  15. NASA Glenn Research Center Experience with "LENR Phenomenon"

    Science.gov (United States)

    Wrbanek, Susan Y.; Fralick, Gustave C.; Wrbanek, John D.; Niedra, Janis M.

    2012-01-01

    Since 1989 NASA Glenn Research Center (GRC) has performed some small-scale limited experiments that show evidence of effects claimed by some to be evidence of Low Energy Nuclear Reactions (LENR). The research at GRC has involved observations and work on measurement techniques for observing the temperature effects in reactions of isotopes of hydrogen with palladium hydrides. The various experiments performed involved loading Pd with gaseous H2 and D2, and exposing Pd thin films to multi-bubble sonoluminescence in regular and deuterated water. An overview of these experiments and their results will be presented.

  16. NASA Glenn Research Center Experience with LENR Phenomenon

    Science.gov (United States)

    Wrbanek, Susan Y.; Fralick, Gustave C.; Wrbanek, John D.; Niedra, Janis M.

    2012-01-01

    Since 1989 NASA Glenn Research Center (GRC) has performed some small-scale limited experiments that show evidence of effects claimed by some to be evidence of Low Energy Nuclear Reactions (LENR). The research at GRC has involved observations and work on measurement techniques for observing the temperature effects in reactions of isotopes of hydrogen with palladium hydrides. The various experiments performed involved loading Pd with gaseous H2 and D2, and exposing Pd thin films to multi-bubble sonoluminescence in regular and deuterated water. An overview of these experiments and their results will be presented.

  17. Acoustic Analysis and Design of the E-STA MSA Simulator

    Science.gov (United States)

    Bittinger, Samantha A.

    2016-01-01

    The Orion European Service Module Structural Test Article (E-STA) Acoustic Test was completed in May 2016 to verify that the European Service Module (ESM) can withstand qualification acoustic environments. The test article required an aft closeout to simulate the Multi-Purpose Crew Vehicle (MPCV) Stage Adapter (MSA) cavity, however, the flight MSA design was too cost-prohibitive to build. NASA Glenn Research Center (GRC) had 6 months to design an MSA Simulator that could recreate the qualification prediction MSA cavity sound pressure level to within a reasonable tolerance. This paper summarizes the design and analysis process to arrive at a design for the MSA Simulator, and then compares its performance to the final prediction models created prior to test.

  18. FAX SERVICE

    CERN Multimedia

    Telephone Service

    2002-01-01

    As from 1st of July 2002, responsibility for running the Fax Service will be transfered to the Printer Service. Future requests for machines, toner and breakdown should be sent to Printer.Support@cern.ch - tel 78888. Telephone Service

  19. Manufacturing Bms/Iso System Review

    Science.gov (United States)

    Gomez, Yazmin

    2004-01-01

    The Quality Management System (QMS) is one that recognizes the need to continuously change and improve an organization s products and services as determined by system feedback, and corresponding management decisions. The purpose of a Quality Management System is to minimize quality variability of an organization's products and services. The optimal Quality Management System balances the need for an organization to maintain flexibility in the products and services it provides with the need for providing the appropriate level of discipline and control over the processes used to provide them. The goal of a Quality Management System is to ensure the quality of the products and services while consistently (through minimizing quality variability) meeting or exceeding customer expectations. The GRC Business Management System (BMS) is the foundation of the Center's ISO 9001:2000 registered quality system. ISO 9001 is a quality system model developed by the International Organization for Standardization. BMS supports and promote the Glenn Research Center Quality Policy and wants to ensure the customer satisfaction while also meeting quality standards. My assignment during this summer is to examine the manufacturing processes used to develop research hardware, which in most cases are one of a kind hardware, made with non conventional equipment and materials. During this process of observation I will make a determination, based on my observations of the hardware development processes the best way to meet customer requirements and at the same time achieve the GRC quality standards. The purpose of my task is to review the manufacturing processes identifying opportunities in which to optimize the efficiency of the processes and establish a plan for implementation and continuous improvement.

  20. Service Modularity

    DEFF Research Database (Denmark)

    Avlonitis, Viktor; Hsuan, Juliana

    2015-01-01

    The purpose of this research is to investigate the studies on service modularity with a goal of informing service science and advancing contemporary service systems research. Modularity, a general systems property, can add theoretical underpinnings to the conceptual development of service science...... in general and service systems in particular. Our research is guided by the following question: how can modularity theory inform service system design? We present a review of the modularity literature and associated concepts. We then introduce the contemporary service science and service system discourse...

  1. Rocket Propulsion (RP) 21 Steering Committee Meeting - NASA Spacecraft Propulsion Update

    Science.gov (United States)

    Klem, Mark

    2016-01-01

    Lander Tech is three separate but synergistic efforts: Lunar CATALYST (Lunar Cargo Transportation and Landing by Soft Touchdown) Support U.S. industry led robotic lunar lander development via three public-private efforts. Support U.S. industry led robotic lunar lander development via three public-private partnerships. Infuse or transfer landing technologies into these public private partnerships. Advanced Exploration Systems-Automated Propellant Loading (APL) -Integrated Ground Operations. Demonstrate LH2 zero loss storage, loading and transfer operations via testing on a large scale in a relevant launch vehicle servicing environment. (KSC, GRC). Game Changing Technology-20 Kelvin -20 Watt Cryocooler Development of a Reverse Turbo-Brayton Cryocooler operating at 20 Kelvin with 20 Watts of refrigeration lift.

  2. Ecosystem Services

    Science.gov (United States)

    Ecosystem goods and services are the many life-sustaining benefits we receive from nature and contribute to environmental and human health and well-being. Ecosystem-focused research will develop methods to measure ecosystem goods and services.

  3. Web Service

    Science.gov (United States)

    ... topic data in XML format. Using the Web service, software developers can build applications that utilize MedlinePlus health topic information. The service accepts keyword searches as requests and returns relevant ...

  4. Service Innovations

    DEFF Research Database (Denmark)

    Sørensen, Lene Tolstrup; Nicolajsen, Hanne Westh

    2010-01-01

    This article discusses the challenges in relation to an ongoing project named converged advanced mobile media platform (CAMMP), where all the different stakeholders need to have a saying in the service development for the upcoming rich, mobile broadcasting services....

  5. Service marketing

    Directory of Open Access Journals (Sweden)

    Babić-Hodović Vesna

    2002-01-01

    Full Text Available Development of postindustrial society and services revolution created numerous changes in size of consumer demand, consumer reaction and priorities. Continuous change on the side of demand and offer must follow changes in marketing orientation. Leader in that change is services marketing which by knowing services range and all the changes builds a new concept called Relationship Marketing.

  6. Integrated services

    International Nuclear Information System (INIS)

    Chafcouloff, S.; Michel, G.; Trice, M.; Clark, G.; Cosad, C.; Forbes, K.

    1995-01-01

    Integrated services is the name given to several services grouped together under a single contract. Four key factors determine the success of integrated services projects: teamwork, common objectives, technology, and shared benefits. For oil companies, integration means smoother, more efficient operations by bringing service companies on board as part of the team. For the service industry, it means a radical change in the way business is conducted, taking on more responsibility in return for greater incentives. This article reviews the need for change and the approach Schlumberger has adopted to meet this challenge. 20 figs., 20 refs

  7. Integrated services

    Energy Technology Data Exchange (ETDEWEB)

    Chafcouloff, S.; Michel, G.; Trice, M. [Schlumberger Integrated Project Management Group, Montrouge (France); Clark, G. [Schlumberger Testing Services, Aberdeen (United Kingdom); Cosad, C.; Forbes, K. [Schlumberger Integrated Project Management Group, Aberdeen (United Kingdom)

    1995-12-31

    Integrated services is the name given to several services grouped together under a single contract. Four key factors determine the success of integrated services projects: teamwork, common objectives, technology, and shared benefits. For oil companies, integration means smoother, more efficient operations by bringing service companies on board as part of the team. For the service industry, it means a radical change in the way business is conducted, taking on more responsibility in return for greater incentives. This article reviews the need for change and the approach Schlumberger has adopted to meet this challenge. 20 figs., 20 refs

  8. The Green Propellant Infusion Mission Thruster Performance Testing for Plume Diagnostics

    Science.gov (United States)

    Deans, Matthew C.; Reed, Brian D.; Arrington, Lynn A.; Williams, George J.; Kojima, Jun J.; Kinzbach, McKenzie I.; McLean, Christopher H.

    2014-01-01

    The Green Propellant Infusion Mission (GPIM) is sponsored by NASA's Space Technology Mission Directorate (STMD) Technology Demonstration Mission (TDM) office. The goal of GPIM is to advance the technology readiness level of a green propulsion system, specifically, one using the monopropellant, AF-M315E, by demonstrating ground handling, spacecraft processing, and on-orbit operations. One of the risks identified for GPIM is potential contamination of sensitive spacecraft surfaces from the effluents in the plumes of AF-M315E thrusters. NASA Glenn Research Center (GRC) is conducting activities to characterize the effects of AF-M315E plume impingement and deposition. GRC has established individual plume models of the 22-N and 1-N thrusters that will be used on the GPIM spacecraft. The model simulations will be correlated with plume measurement data from Laboratory and Engineering Model 22-N, AF-M315E thrusters. The thrusters are currently being tested in a small rocket, altitude facility at NASA GRC. A suite of diagnostics, including Raman spectroscopy, Rayleigh spectroscopy, and Schlieren imaging are being used to acquire plume measurements of AF-M315E thrusters. Plume data will include temperature, velocity, relative density, and species concentration. The plume measurement data will be compared to the corresponding simulations of the plume model. The GRC effort will establish a data set of AF-M315E plume measurements and a plume model that can be used for future AF-M315E applications.

  9. Defense AT and L. Volume 38, Number 1, January-February 2009

    Science.gov (United States)

    2009-01-01

    magazine. The Star Trek theme was an entertaining way to eff ectively present important information. I liked the rules the author cited, especially...technology.grc.nasa.gov/ Promotes competitiveness of U.S. in- dustry through commercial use of NASA technologies and expertise. National Contract

  10. 78 FR 52215 - Notice of Information Collection

    Science.gov (United States)

    2013-08-22

    .... Method of Collection Electronic and Paper III. Data Title: NASA GRC Shadowing and Exploring OMB Number: 2700-XXXX Type of review: Existing Collection without OMB Approval Affected Public: Individuals... in the 14-20 age groups. It connects classroom training to tangible activities that enable practical...

  11. Using Gender Role Conflict Theory in Counseling Male-to-Female Transgender Individuals

    Science.gov (United States)

    Wester, Stephen R.; McDonough, Tracy A.; White, Maureen; Vogel, David L.; Taylor, Lareena

    2010-01-01

    Ignoring gender socialization while counseling transgender clients neglects a significant aspect of the transgender experience. To address this, the authors review the literature on gender role conflict (GRC) theory as it pertains to the transgender experience of biological males whose authentic self is female. They explore the main types of…

  12. Light Microscopy Module (LMM)-Emulator

    Science.gov (United States)

    Levine, Howard G.; Smith, Trent M.; Richards, Stephanie E.

    2016-01-01

    The Light Microscopy Module (LMM) is a microscope facility developed at Glenn Research Center (GRC) that provides researchers with powerful imaging capability onboard the International Space Station (ISS). LMM has the ability to have its hardware recongured on-orbit to accommodate a wide variety of investigations, with the capability of remotely acquiring and downloading digital images across multiple levels of magnication.

  13. Experimental/numerical acoustic correlation of helicopter unsteady MANOEUVRES

    NARCIS (Netherlands)

    Gennaretti, Massimo; Bernardini, Giovanni; Hartjes, S.; Scandroglio, Alessandro; Riviello, Luca; Paolone, Enrico

    2016-01-01

    This paper presents one of the main objective of WP1 of Clean Sky GRC5 MANOEUVRES project, which consists in the correlation of ground noise data measured during flight tests, with numerical predictions obtained by a numerical process aimed at the analysis of the acoustic field emitted by

  14. Thinking Complexly about Men, Gender Role Conflict, and Counseling Psychology

    Science.gov (United States)

    Wester, Stephen R.

    2008-01-01

    O'Neil (2008) defines male gender role conflict (GRC) as a psychological state in which the socialized male gender role has negative consequences for the person or others. Building on this, many now realize that the mechanisms through which these negative consequences occur, rather than being global, are instead contextual. That is, different men…

  15. Cladodes, leaf-like organs in Asparagus, show the significance of co-option of pre-existing genetic regulatory circuit for morphological diversity of plants.

    Science.gov (United States)

    Nakayama, Hokuto; Yamaguchi, Takahiro; Tsukaya, Hirokazu

    2012-08-01

    Plants in the genus Asparagus have determinate leaf-like organs called cladodes in the position of leaf axils. Because of their leaf-like morphology, axillary position, and morphological variation, it has been unclear how this unusual organ has evolved and diversified. In the previous study, we have shown that cladodes in the genus Asparagus are modified axillary shoots and proposed a model that cladodes have arisen by co-option and deployment of genetic regulatory circuit (GRC) involved in leaf development. Moreover, we proposed that the alteration of the expression pattern of genes involved in establishment of adaxial/abaxial polarity has led to the morphological diversification from leaf-like to rod-like form of cladodes in the genus. Thus, these results indicated that the co-option and alteration of pre-existing GRC play an important role in acquisition and subsequent morphological diversification. Here, we present data of further expression analysis of A. asparagoides. The results suggested that only a part of the GRC involved in leaf development appears to have been co-opted into cladode development. Based on our study and several examples of the morphological diversification, we briefly discuss the importance of co-option of pre-existing GRC and its genetic modularity in the morphological diversity of plants during evolution.

  16. Charging Effects on Fluid Stream Droplets for Momentum Exchange Between Spacecraft

    Science.gov (United States)

    2009-01-01

    temperature where liquid polymers transition to a brittle glass like state and solid polymers transition to a rubbery state. A technical... Glen Research Center, Thermo Mechanical Systems Branch http://www.grc.nasa.gov/WWW/tmsb/concentrators.html [accessed Sep 29, 2006]. Purcell, E

  17. Gender role conflict among African American men who have sex with men and women: associations with mental health and sexual risk and disclosure behaviors.

    Science.gov (United States)

    Bingham, Trista A; Harawa, Nina T; Williams, John K

    2013-01-01

    We investigated whether high gender role conflict (GRC; internal conflict with traditional gender-role stereotypes and an individual's perceived need to comply with these roles) is associated with psychological distress and HIV-related risk behaviors in a sample of African American men who have sex with men and women (MSMW). We analyzed baseline data collected from questionnaires completed by 400 MSMW participating in the Men of African American Legacy Empowering Self project in Los Angeles, California, in 2007 to 2010 for associations between participants' GRC and experiences of poor mental health and HIV risk outcomes. MSMW who reported higher levels of GRC than other participants also reported more psychological distress, lower self-esteem, greater internalized homophobia, less HIV knowledge, lower risk reduction skills, less disclosure of same-sex behaviors to others, and more unprotected vaginal or anal intercourse with female partners. Future research should consider how high GRC affects African American MSMW's lives and identify specific approaches to help alleviate the psychological distress and other negative behavioral outcomes associated with internal conflict caused by rigid gender role socialization.

  18. Control and Non-Payload Communications (CNPC) Prototype Radio - Generation 2 Security Flight Test Report

    Science.gov (United States)

    Iannicca, Dennis C.; Ishac, Joseph A.; Shalkhauser, Kurt A.

    2015-01-01

    NASA Glenn Research Center (GRC), in cooperation with Rockwell Collins, is working to develop a prototype Control and Non-Payload Communications (CNPC) radio platform as part of NASA Integrated Systems Research Program's (ISRP) Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) project. A primary focus of the project is to work with the Federal Aviation Administration (FAA) and industry standards bodies to build and demonstrate a safe, secure, and efficient CNPC architecture that can be used by industry to evaluate the feasibility of deploying a system using these technologies in an operational capacity. GRC has been working in conjunction with these groups to assess threats, identify security requirements, and to develop a system of standards-based security controls that can be applied to the GRC prototype CNPC architecture as a demonstration platform. The proposed security controls were integrated into the GRC flight test system aboard our S-3B Viking surrogate aircraft and several network tests were conducted during a flight on November 15th, 2014 to determine whether the controls were working properly within the flight environment. The flight test was also the first to integrate Robust Header Compression (ROHC) as a means of reducing the additional overhead introduced by the security controls and Mobile IPv6. The effort demonstrated the complete end-to-end secure CNPC link in a relevant flight environment.

  19. Gearbox Reliability Collaborative High Speed Shaft Tapered Roller Bearing Calibration

    Energy Technology Data Exchange (ETDEWEB)

    Keller, J.; Guo, Y.; McNiff, B.

    2013-10-01

    The National Renewable Energy Laboratory (NREL) Gearbox Reliability Collaborative (GRC) is a project investigating gearbox reliability primarily through testing and modeling. Previous dynamometer testing focused upon acquiring measurements in the planetary section of the test gearbox. Prior to these tests, the strain gages installed on the planetary bearings were calibrated in a load frame.

  20. Test Rack Development for Extended Operation of Advanced Stirling Convertors at NASA Glenn Research Center

    Science.gov (United States)

    Dugala, Gina M.

    2010-01-01

    The U.S. Department of Energy, Lockheed Martin Space Systems Company, Sunpower Inc., and NASA Glenn Research Center (GRC) have been developing an Advanced Stirling Radioisotope Generator (ASRG) for use as a power system on space science missions. This generator will make use of free-piston Stirling convertors to achieve higher conversion efficiency than with currently available alternatives. One part of NASA GRC's support of ASRG development includes extended operation testing of Advanced Stirling Convertors (ASCs) developed by Sunpower Inc. and GRC. The ASC consists of a free-piston Stirling engine integrated with a linear alternator. NASA GRC has been building test facilities to support extended operation of the ASCs for several years. Operation of the convertors in the test facility provides convertor performance data over an extended period of time. One part of the test facility is the test rack, which provides a means for data collection, convertor control, and safe operation. Over the years, the test rack requirements have changed. The initial ASC test rack utilized an alternating-current (AC) bus for convertor control; the ASRG Engineering Unit (EU) test rack can operate with AC bus control or with an ASC Control Unit (ACU). A new test rack is being developed to support extended operation of the ASC-E2s with higher standards of documentation, component selection, and assembly practices. This paper discusses the differences among the ASC, ASRG EU, and ASC-E2 test racks.

  1. The Value of Successful MBSE Adoption

    Science.gov (United States)

    Parrott, Edith

    2016-01-01

    The value of successful adoption of Model Based System Engineering (MBSE) practices is hard to quantify. Most engineers and project managers look at the success in terms of cost. But there are other ways to quantify the value of MBSE and the steps necessary to achieve adoption. The Glenn Research Center (GRC) has been doing Model-Based Engineering (design, structural, etc.) for years, but the system engineering side has not. Since 2010, GRC has been moving from documents centric to MBSE/SysML. Project adoption of MBSE has been slow, but is steadily increasing in both MBSE usage and complexity of generated products. Sharing of knowledge of lessons learned in the implementation of MBSE/SysML is key for others who want to be successful. Along with GRC's implementation, NASA is working hard to increase the successful implementation of MBSE across all the other centers by developing guidelines, templates and libraries for projects to utilize. This presentation will provide insight into recent GRC and NASA adoption efforts, lessons learned and best practices.

  2. Extended Operation of Stirling Convertors at NASA Glenn Research Center

    Science.gov (United States)

    Oriti, Salvatore, M.

    2012-01-01

    NASA Glenn Research Center (GRC) has been supporting development of free-piston Stirling conversion technology for spaceflight electrical power generation since 1999. GRC has also been supporting the development of the Advanced Stirling Radioisotope Generator (ASRG) since 2006. A key element of the ASRG project is providing life, reliability, and performance data for the Advanced Stirling Convertor (ASC). The Thermal Energy Conversion branch at GRC is conducting extended operation of several free-piston Stirling convertors. The goal of this effort is to generate long-term performance data (tens of thousands of hours) on multiple units to build a life and reliability database. Currently, GRC is operating 18 convertors. This hardware set includes Technology Demonstration Convertors (TDCs) from Infinia Corporation, of which one pair (TDCs #13 and #14) has accumulated over 60,000 hr (6.8 years) of operation. Also under test are various Sunpower, Inc. convertors that were fabricated during the ASC development activity, including ASC-0, ASC-E (including those in the ASRG engineering unit), and ASC-E2. The ASC-E2s also completed, or are in progress of completing workmanship vibration testing, performance mapping, and extended operation. Two ASC-E2 units will also be used for durability testing, during which components will be stressed to levels above nominal mission usage. Extended operation data analyses from these tests are covered in this paper.

  3. Performance Measurement of Advanced Stirling Convertors (ASC-E3)

    Science.gov (United States)

    Oriti, Salvatore M.

    2013-01-01

    NASA Glenn Research Center (GRC) has been supporting development of the Advanced Stirling Radioisotope Generator (ASRG) since 2006. A key element of the ASRG project is providing life, reliability, and performance testing data of the Advanced Stirling Convertor (ASC). The latest version of the ASC (ASC-E3, to represent the third cycle of engineering model test hardware) is of a design identical to the forthcoming flight convertors. For this generation of hardware, a joint Sunpower and GRC effort was initiated to improve and standardize the test support hardware. After this effort was completed, the first pair of ASC-E3 units was produced by Sunpower and then delivered to GRC in December 2012. GRC has begun operation of these units. This process included performance verification, which examined the data from various tests to validate the convertor performance to the product specification. Other tests included detailed performance mapping that encompassed the wide range of operating conditions that will exist during a mission. These convertors were then transferred to Lockheed Martin for controller checkout testing. The results of this latest convertor performance verification activity are summarized here.

  4. THX Experiment Overview

    Science.gov (United States)

    Wernet, Mark; Wroblewski, Adam; Locke, Randy; Georgiadis, Nick

    2016-01-01

    This presentation provides an overview of experiments conducted at NASA GRC to provide turbulent flow measurements needed for new turbulence model development and validation. The experiments include particle image velocimetry (PIV) and hot-wire measurements of mean flow velocity and temperature fields, as well as fluctuating components.

  5. Electron Donor Acceptor Interactions. Final Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Moore, Ana L. [Arizona State Univ., Tempe, AZ (United States)

    2002-08-16

    The Gordon Research Conference (GRC) on Electron Donor Acceptor Interactions was held at Salve Regina University, Newport, Rhode Island, 8/11-16/02. Emphasis was placed on current unpublished research and discussion of the future target areas in this field.

  6. Management services

    International Nuclear Information System (INIS)

    Adkins, S.K.; Alford, D.R.; Barnette, A.B.

    1979-01-01

    The Management Services Section provides coordinated professional administrative services to the Fusion Energy Division (FED), allowing the work of technical professionals to be more fully concentrated in their areas of specialty. Services are provided in general administration, personnel, financial management, communications (including text and graphics generation), management information, library, safety, quality assurance, and nonprogrammatic engineering services. Highlights of the past year included adoption of the Procurement Module in the FED Management Information System (MIS) for use by the entire Laboratory, completion of the Personnel Module of the MIS, greatly increased personnel recruiting activity, and increased industrial subcontracting activity

  7. Dosimetry Service

    CERN Multimedia

    2006-01-01

    Cern Staff and Users can now consult their dose records for an individual or an organizational unit with HRT. Please see more information on our web page: http://cern.ch/rp-dosimetry Dosimetry Service is open every morning from 8.30 - 12.00. Closed in the afternoons. We would like to remind you that dosimeters cannot be sent to customers by internal mail. Short-term dosimeters (VCT's) must always be returned to the Service after the use and must not be left on the racks in the experimental areas or in the secretariats. Dosimetry Service Tel. 7 2155 Dosimetry.service@cern.ch http://cern.ch/rp-dosimetry

  8. Passive Thermal Design Approach for the Space Communications and Navigation (SCaN) Testbed Experiment on the International Space Station (ISS)

    Science.gov (United States)

    Siamidis, John; Yuko, Jim

    2014-01-01

    The Space Communications and Navigation (SCaN) Program Office at NASA Headquarters oversees all of NASAs space communications activities. SCaN manages and directs the ground-based facilities and services provided by the Deep Space Network (DSN), Near Earth Network (NEN), and the Space Network (SN). Through the SCaN Program Office, NASA GRC developed a Software Defined Radio (SDR) testbed experiment (SCaN testbed experiment) for use on the International Space Station (ISS). It is comprised of three different SDR radios, the Jet Propulsion Laboratory (JPL) radio, Harris Corporation radio, and the General Dynamics Corporation radio. The SCaN testbed experiment provides an on-orbit, adaptable, SDR Space Telecommunications Radio System (STRS) - based facility to conduct a suite of experiments to advance the Software Defined Radio, Space Telecommunications Radio Systems (STRS) standards, reduce risk (Technology Readiness Level (TRL) advancement) for candidate Constellation future space flight hardware software, and demonstrate space communication links critical to future NASA exploration missions. The SCaN testbed project provides NASA, industry, other Government agencies, and academic partners the opportunity to develop and field communications, navigation, and networking technologies in the laboratory and space environment based on reconfigurable, software defined radio platforms and the STRS Architecture.The SCaN testbed is resident on the P3 Express Logistics Carrier (ELC) on the exterior truss of the International Space Station (ISS). The SCaN testbed payload launched on the Japanese Aerospace Exploration Agency (JAXA) H-II Transfer Vehicle (HTV) and was installed on the ISS P3 ELC located on the inboard RAM P3 site. The daily operations and testing are managed out of NASA GRC in the Telescience Support Center (TSC).

  9. Future Standardization of Space Telecommunications Radio System with Core Flight System

    Science.gov (United States)

    Briones, Janette C.; Hickey, Joseph P.; Roche, Rigoberto; Handler, Louis M.; Hall, Charles S.

    2016-01-01

    NASA Glenn Research Center (GRC) is integrating the NASA Space Telecommunications Radio System (STRS) Standard with the Core Flight System (cFS), an avionics software operating environment. The STRS standard provides a common, consistent framework to develop, qualify, operate and maintain complex, reconfigurable and reprogrammable radio systems. The cFS is a flexible, open architecture that features a plugand- play software executive called the Core Flight Executive (cFE), a reusable library of software components for flight and space missions and an integrated tool suite. Together, STRS and cFS create a development environment that allows for STRS compliant applications to reference the STRS application programmer interfaces (APIs) that use the cFS infrastructure. These APIs are used to standardize the communication protocols on NASAs space SDRs. The cFS-STRS Operating Environment (OE) is a portable cFS library, which adds the ability to run STRS applications on existing cFS platforms. The purpose of this paper is to discuss the cFS-STRS OE prototype, preliminary experimental results performed using the Advanced Space Radio Platform (ASRP), the GRC S- band Ground Station and the SCaN (Space Communication and Navigation) Testbed currently flying onboard the International Space Station (ISS). Additionally, this paper presents a demonstration of the Consultative Committee for Space Data Systems (CCSDS) Spacecraft Onboard Interface Services (SOIS) using electronic data sheets (EDS) inside cFE. This configuration allows for the data sheets to specify binary formats for data exchange between STRS applications. The integration of STRS with cFS leverages mission-proven platform functions and mitigates barriers to integration with future missions. This reduces flight software development time and the costs of software-defined radio (SDR) platforms. Furthermore, the combined benefits of STRS standardization with the flexibility of cFS provide an effective, reliable and

  10. Aviation Safety Modeling and Simulation (ASMM) Propulsion Fleet Modeling: A Tool for Semi-Automatic Construction of CORBA-based Applications from Legacy Fortran Programs

    Science.gov (United States)

    Sang, Janche

    2003-01-01

    Within NASA's Aviation Safety Program, NASA GRC participates in the Modeling and Simulation Project called ASMM. NASA GRC s focus is to characterize the propulsion systems performance from a fleet management and maintenance perspective by modeling and through simulation predict the characteristics of two classes of commercial engines (CFM56 and GE90). In prior years, the High Performance Computing and Communication (HPCC) program funded, NASA Glenn in developing a large scale, detailed simulations for the analysis and design of aircraft engines called the Numerical Propulsion System Simulation (NPSS). Three major aspects of this modeling included the integration of different engine components, coupling of multiple disciplines, and engine component zooming at appropriate level fidelity, require relatively tight coupling of different analysis codes. Most of these codes in aerodynamics and solid mechanics are written in Fortran. Refitting these legacy Fortran codes with distributed objects can increase these codes reusability. Aviation Safety s modeling and simulation use in characterizing fleet management has similar needs. The modeling and simulation of these propulsion systems use existing Fortran and C codes that are instrumental in determining the performance of the fleet. The research centers on building a CORBA-based development environment for programmers to easily wrap and couple legacy Fortran codes. This environment consists of a C++ wrapper library to hide the details of CORBA and an efficient remote variable scheme to facilitate data exchange between the client and the server model. Additionally, a Web Service model should also be constructed for evaluation of this technology s use over the next two- three years.

  11. Overview of NASA GRCs Green Propellant Infusion Mission Thruster Testing and Plume Diagnostics

    Science.gov (United States)

    Deans, Matthew C.; Reed, Brian D.; Yim, John T.; Arrington, Lynn A.; Williams, George J.; Kojima, Jun J.; McLean, Christopher H.

    2014-01-01

    The Green Propellant Infusion Mission (GPIM) is sponsored by NASA's Space Technology Mission Directorate (STMD) Technology Demonstration Mission (TDM) office. The goal of GPIM is to advance the technology readiness level of a green propulsion system, specifically, one using the monopropellant, AF-M315E, by demonstrating ground handling, spacecraft processing, and on-orbit operations. One of the risks identified for GPIM is potential contamination of sensitive spacecraft surfaces from the effluents in the plumes of AF-M315E thrusters. NASA Glenn Research Center (GRC) is conducting activities to characterize the effects of AF-M315E plume impingement and deposition. GRC has established individual plume models of the 22-N and 1-N thrusters that will be used on the GPIM spacecraft. The models describe the pressure, temperature, density, Mach number, and species concentration of the AF-M315E thruster exhaust plumes. The models are being used to assess the impingement effects of the AF-M315E thrusters on the GPIM spacecraft. The model simulations will be correlated with plume measurement data from Laboratory and Engineering Model 22-N, AF-M315E thrusters. The thrusters will be tested in a small rocket, altitude facility at NASA GRC. The GRC thruster testing will be conducted at duty cycles representatives of the planned GPIM maneuvers. A suite of laser-based diagnostics, including Raman spectroscopy, Rayleigh spectroscopy, Schlieren imaging, and physical probes will be used to acquire plume measurements of AFM315E thrusters. Plume data will include temperature, velocity, relative density, and species concentration. The plume measurement data will be compared to the corresponding simulations of the plume model. The GRC effort will establish a data set of AF-M315E plume measurements and a plume model that can be used for future AF-M315E applications.

  12. Validation of Patient-Reported Outcomes Measurement Information System Short Forms for Use in Childhood-Onset Systemic Lupus Erythematosus.

    Science.gov (United States)

    Jones, Jordan T; Carle, Adam C; Wootton, Janet; Liberio, Brianna; Lee, Jiha; Schanberg, Laura E; Ying, Jun; Morgan DeWitt, Esi; Brunner, Hermine I

    2017-01-01

    To validate the pediatric Patient-Reported Outcomes Measurement Information System short forms (PROMIS-SFs) in childhood-onset systemic lupus erythematosus (SLE) in a clinical setting. At 3 study visits, childhood-onset SLE patients completed the PROMIS-SFs (anger, anxiety, depressive symptoms, fatigue, physical function-mobility, physical function-upper extremity, pain interference, and peer relationships) using the PROMIS assessment center, and health-related quality of life (HRQoL) legacy measures (Pediatric Quality of Life Inventory, Childhood Health Assessment Questionnaire, Simple Measure of Impact of Lupus Erythematosus in Youngsters [SMILEY], and visual analog scales [VAS] of pain and well-being). Physicians rated childhood-onset SLE activity on a VAS and completed the Systemic Lupus Erythematosus Disease Activity Index 2000. Using a global rating scale of change (GRC) between study visits, physicians rated change of childhood-onset SLE activity (GRC-MD1: better/same/worse) and change of patient overall health (GRC-MD2: better/same/worse). Questionnaire scores were compared in support of validity and responsiveness to change (external standards: GRC-MD1, GRC-MD2). In this population-based cohort (n = 100) with a mean age of 15.8 years (range 10-20 years), the PROMIS-SFs were completed in less than 5 minutes in a clinical setting. The PROMIS-SF scores correlated at least moderately (Pearson's r ≥ 0.5) with those of legacy HRQoL measures, except for the SMILEY. Measures of childhood-onset SLE activity did not correlate with the PROMIS-SFs. Responsiveness to change of the PROMIS-SFs was supported by path, mixed-model, and correlation analyses. To assess HRQoL in childhood-onset SLE, the PROMIS-SFs demonstrated feasibility, internal consistency, construct validity, and responsiveness to change in a clinical setting. © 2016, American College of Rheumatology.

  13. Development and Testing of a Prototype Grid-Tied Photovoltaic Power System

    Science.gov (United States)

    Eichenberg, Dennis J.

    2009-01-01

    The NASA Glenn Research Center (GRC) has developed and tested a prototype 2 kW DC grid-tied photovoltaic (PV) power system at the Center. The PV system has generated in excess of 6700 kWh since operation commenced in July 2006. The PV system is providing power to the GRC grid for use by all. Operation of the prototype PV system has been completely trouble free. A grid-tied PV power system is connected directly to the utility distribution grid. Facility power can be obtained from the utility system as normal. The PV system is synchronized with the utility system to provide power for the facility, and excess power is provided to the utility. The project transfers space technology to terrestrial use via nontraditional partners. GRC personnel glean valuable experience with PV power systems that are directly applicable to various space power systems, and provide valuable space program test data. PV power systems help to reduce harmful emissions and reduce the Nation s dependence on fossil fuels. Power generated by the PV system reduces the GRC utility demand, and the surplus power aids the community. Present global energy concerns reinforce the need for the development of alternative energy systems. Modern PV panels are readily available, reliable, efficient, and economical with a life expectancy of at least 25 years. Modern electronics has been the enabling technology behind grid-tied power systems, making them safe, reliable, efficient, and economical with a life expectancy of at least 25 years. Based upon the success of the prototype PV system, additional PV power system expansion at GRC is under consideration. The prototype grid-tied PV power system was successfully designed and developed which served to validate the basic principles described, and the theoretical work that was performed. The report concludes that grid-tied photovoltaic power systems are reliable, maintenance free, long life power systems, and are of significant value to NASA and the community.

  14. The Association Between Men's Concern About Demonstrating Masculine Characteristics and Their Sexual Risk Behaviors: Findings from the Dominican Republic.

    Science.gov (United States)

    Fleming, Paul J; Barrington, Clare; Powell, Wizdom; Gottert, Ann; Lerebours, Leonel; Donastorg, Yeycy; Brito, Maximo O

    2018-02-01

    Quantitative analyses exploring the relationship between masculinities and men's sexual risk behaviors have most commonly used one dimension of masculinities: men's gender ideology. Examining other dimensions may enhance our understanding of and ability to intervene upon this relationship. In this article, we examined the association between gender role conflict/stress (GRC/S)-men's concern about demonstrating masculine characteristics-and three different sexual risk behaviors (having two or more sex partners in the last 30 days; never/inconsistent condom use with non-steady partners; and drinking alcohol at last sex) among a sample of heterosexual men in the Dominican Republic who were participating in an HIV prevention intervention (n = 293). The GRC/S Scale we used was adapted for this specific cultural context and has 17 items (α = 0.75). We used logistic regression to assess the relationship between GRC/S and each sexual behavior, controlling for sociodemographic characteristics. In adjusted models, a higher GRC/S score was significantly associated with increased odds of having two or more sex partners in the past 30 days (AOR 1.33, 95 % CI 1.01-1.74), never/inconsistent condom use with non-steady partners (AOR 1.45, 95 % CI 1.04-2.01), and drinking alcohol at last sex (AOR 1.56, 95 % CI 1.13-2.17). These results highlight the importance of expanding beyond gender ideology to understanding the influence of GRC/S on men's sexual risk behaviors. Interventions should address men's concern about demonstrating masculine characteristics to reduce the social and internalized pressure men feel to engage in sexual risk behaviors.

  15. Information Service.

    Science.gov (United States)

    Scofield, James

    Newspaper librarians discussed the public use of their newspapers' libraries. Policies run the gamut from well-staffed public information services, within or outside the newspaper library, to no service at all to those outside the staff of the paper. Problems of dealing with tax and law enforcement agencies were covered, as well as cooperative…

  16. Registration Service

    CERN Multimedia

    GS Department

    2010-01-01

    Following a reorganization in Building 55, please note that the Registration Service is now organised as follows :  Ground floor: access cards (76903). 1st floor : registration of external firms’ personnel (76611 / 76622); car access stickers (76633); biometric registration (79710). Opening hours: 07-30 to 16-00 non-stop. GS-SEM Group General Infrastructure Services Department

  17. Telephone Service

    CERN Multimedia

    2005-01-01

    As part of the upgrade of telephone services, the CERN exchange switches will be updated on Thursday 2 June between 7.00 p.m. and midnight. Telephone services may be affected and possibly even disrupted during this operation. 

  18. Cleaning Services.

    Science.gov (United States)

    Sharpton, James L.

    This curriculum guide provides cleaning services instructional materials for a ninth- and tenth-grade Coordinated Vocational Education and Training: Home and Community Services program. It includes 2 sections and 11 instructional units. Each unit of instruction consists of eight basic components: performance objectives, teacher activities,…

  19. Service Modeling for Service Engineering

    Science.gov (United States)

    Shimomura, Yoshiki; Tomiyama, Tetsuo

    Intensification of service and knowledge contents within product life cycles is considered crucial for dematerialization, in particular, to design optimal product-service systems from the viewpoint of environmentally conscious design and manufacturing in advanced post industrial societies. In addition to the environmental limitations, we are facing social limitations which include limitations of markets to accept increasing numbers of mass-produced artifacts and such environmental and social limitations are restraining economic growth. To attack and remove these problems, we need to reconsider the current mass production paradigm and to make products have more added values largely from knowledge and service contents to compensate volume reduction under the concept of dematerialization. Namely, dematerialization of products needs to enrich service contents. However, service was mainly discussed within marketing and has been mostly neglected within traditional engineering. Therefore, we need new engineering methods to look at services, rather than just functions, called "Service Engineering." To establish service engineering, this paper proposes a modeling technique of service.

  20. CDBG Public Services Activity

    Data.gov (United States)

    Department of Housing and Urban Development — CDBG activity related to public services, including senior services, legal services, youth services, employment training, health services, homebuyer counseling, food...

  1. IT Service

    Data.gov (United States)

    Department of Homeland Security — Means of delivering value to customers by facilitating outcomes customers want to achieve without the ownership of specific costs and risks. The term 'service' is...

  2. Service modelling

    NARCIS (Netherlands)

    Steen, M.W.A.; Iacob, Maria Eugenia; Lankhorst, M.M.; Jonkers, H.; Zoet, M.; Engelsman, W.; Versendaal, J.; Proper, H.A.; Debije, L.; Gaaloul, K.; Lankhorst, M.

    2012-01-01

    The development of enterprise services involves making design decisions at different levels, ranging from strategic to infrastructural choices, and concerning many different aspects, ranging from customer interaction to information registration concerns. In order to support an agile development

  3. Documentation Service

    International Nuclear Information System (INIS)

    Charnay, J.; Chosson, L.; Croize, M.; Ducloux, A.; Flores, S.; Jarroux, D.; Melka, J.; Morgue, D.; Mottin, C.

    1998-01-01

    This service assures the treatment and diffusion of the scientific information and the management of the scientific production of the institute as well as the secretariat operation for the groups and services of the institute. The report on documentation-library section mentions: the management of the documentation funds, search in international databases (INIS, Current Contents, Inspects), Pret-Inter service which allows accessing documents through DEMOCRITE network of IN2P3. As realizations also mentioned are: the setup of a video, photo database, the Web home page of the institute's library, follow-up of digitizing the document funds by integrating the CD-ROMs and diskettes, electronic archiving of the scientific production, etc

  4. Traumatic Brain Injury service (TBI) Service

    Data.gov (United States)

    Department of Veterans Affairs — This Service provides access to Tramatic Brain injury patient data consult notes. The service also provides one write service method writeNote. The Service supports...

  5. Mail Service

    CERN Multimedia

    TS-FM Group

    2004-01-01

    Tuesday 19 October 2004 Please note that the distribution and collection of mail are likely to be disrupted on Tuesday, October 19, 2004, because of traffic and other restrictions enforced on that day in connection with CERN's fiftieth anniversary celebrations. The service may be completely interrupted in certain areas. Group TS-FM, Tel. 77551

  6. PFInancial services

    Index Scriptorium Estoniae

    2002-01-01

    Briti ettevõttest International Financial Services, mis viib maailmas läbi kampaaniat PPP (Public Private Partnership) ja PFI (Private Finance Initiative) - erasektori ja avaliku sektori vahelise koostöö reklaamimiseks ja edendamiseks. Firma esindajad kohtusid Eesti ametnikega

  7. Dosimetry Service

    CERN Multimedia

    2005-01-01

    Please remember to read your dosimeter at least once a month. Regular read-outs are vital to ensure that your personal dose is periodically monitored. Dosimeters should be read even if you have not visited the controlled areas. Dosimetry Service - Tel. 7 2155 http://cern.ch/rp-dosimetry

  8. Dosimetry Service

    CERN Multimedia

    Dosimetry Service

    2005-01-01

    Please remember to read your dosimeter at least once a month. Regular read-outs are vital to ensure that your personal dose is periodically monitored. Dosimeters should be read even if you have not visited the controlled areas. Dosimetry Service Tel. 7 2155 http://cern.ch/rp-dosimetry

  9. Dosimetry Service

    CERN Multimedia

    2005-01-01

    Please remember to read your dosimeter at least once a month. Regular read-outs are vital to ensure that your personal dose is periodically monitored. Dosimeters should be read even if you have not visited the controlled areas. Dosimetry Service - Tel. 72155 http://cern.ch/rp-dosimetry

  10. Innovation in Services: From Service Concepts to Service Experiences

    OpenAIRE

    Fynes, Brian; Lally, Anne Marie

    2008-01-01

    ABSTRACT Identifying the nature of service experiences is recognised As being of primary importance in the shaping of an enhanced competitive position for industry; however service managers often have difficulty articulating the true nature of their service concept. The definition of service concept is a fundamental part of the strategic advantage seeking Processes of service design, service development and service innovation. In response to the competitive Imperative for improved product/...

  11. Our services

    International Nuclear Information System (INIS)

    2007-01-01

    In this video-films services of the VUJE, a. s. are presented. The company VUJE provides reconstruction and modernization of nuclear installations, research, development and production of equipment for nuclear power plants and electric industry, development of diagnostic methods, training on simulator of reactor, increase of reactor safety, preparation of documentation about NPP for the Nuclear Regulatory Authority of the Slovak Republic, measures for radiation protection and protection of the environment as well as development and application of information technologies.

  12. Using Service Scenarios to Model Business Services

    DEFF Research Database (Denmark)

    Bækgaard, Lars

    The purpose of the paper is to present and evaluate the notion of service scenarios. A service is work done by a service executor in interaction with a service consumer. A service scenario is a model of a service system and the roles that are played by the actors participating and interacting...... during the execution of a service. The model represents the roles and the interactions between the participants. Service scenarios can be used to model specific services and roles played by human beings and IT systems in the execution of services. The use of service scenarios is demonstrated by means...... of a case study in a public library. The case study indicates that service systems should be understood as socio-technical systems in which service executors and service consumers co-create value in mutual interaction with each other and with a set of shared resources....

  13. Service Robots

    DEFF Research Database (Denmark)

    Clemmensen, Torkil; Nielsen, Jeppe Agger; Andersen, Kim Normann

    The position presented in this paper is that in order to understand how service robots shape, and are being shaped by, the physical and social contexts in which they are used, we need to consider both work/organizational analysis and interaction design. We illustrate this with qualitative data...... and personal experiences to generate discussion about how to link these two traditions. This paper presents selected results from a case study that investigated the implementation and use of robot vacuum cleaners in Danish eldercare. The study demonstrates interpretive flexibility with variation...

  14. The service Ouroboros: Designing personas service cycles

    DEFF Research Database (Denmark)

    Gudiksen, Sune Klok; Brandt, Eva

    2014-01-01

    Many companies investigate new business opportunities in a turn from product to service design. As service offerings expand over time and space, such notions as ‘customer journey’ or ‘service blueprint’ have been suggested to grasp and design the nature of the emergent services. However, we find ...... various customers’´service cycles....

  15. Service registry design: an information service approach

    NARCIS (Netherlands)

    Ferreira Pires, Luis; Wang, J.; van Oostrum, Arjen; Wijnhoven, Alphonsus B.J.M.

    2010-01-01

    A service registry is a Service-Oriented Architecture (SOA) component that keeps a ‘catalogue’ of available services. It stores service specifications so that these specifications can be found by potential users. Discussions on the design of service registries currently focus on technical issues,

  16. Comportamiento a tracción de cementos reforzados con fibras de vidrio

    Directory of Open Access Journals (Sweden)

    Sánchez Paradela, M. Laura

    1991-06-01

    Full Text Available Glassfibre Reinforced Cement (GRC is a composite material widely used in the field of building construction. It offers multiple applications due to its high strength as well as fire and corrosoón resistance. However, it degradates with time, affecting its mechanical properties, mainly its ductility, becoming progressively brittle and cracking under low deformations. Therefore, with the aim of predicting the mechanical behaviour of the material, both at short time and long time, a wide experimental program has been carried out, testing fresh material as well as aged material. A high number of tensile tests have been performed, using GRC specimens with different kind of fibres and different manufacturing processes for comparison of results. It must be pointed out that it is the first time that tensile tests of GRC specimens have been carried out in Spain.

    El cemento reforzado con fibras de vidrio (GRC es un material compuesto que se viene utilizando ampliamente en el campo de la Construcción. Presenta múltiples aplicaciones debido a sus buenas propiedades resistentes y de protección frente al fuego y la corrosión. Sin embargo, sufre un deterioro con el tiempo, que afecta a sus propiedades mecánicas, principalmente a su ductilidad, volviéndose frágil y agrietándose bajo pequeñas deformaciones. Por tal motivo y con el fin de predecir el comportamiento mecánico del material a corto y a largo plazo, se ha desarrollado un extenso programa experimental, empleando tanto material joven como envejecido. Se han realizado numerosos ensayos de tracción directa, utilizando probetas de GRC con diversos tipos de fibras y empleando distintos métodos de fabricación para una comparación de resultados. Es la primera vez que se realizan ensayos de tracción directa en España sobre probetas de GRC.

  17. Controlling service delivery in service triads

    NARCIS (Netherlands)

    Iwaarden, van J.; Valk, van der W.; Aalders, L.; Virolainen, V.-M.

    2010-01-01

    Organizations are increasingly sourcing services that are directly delivered to their (end) customers by external providers. Buying organization, supplier and (end) customer operate in a triadic service relationship. In these triads, the buying organization lacks direct control over service delivery

  18. Finance and Management Services

    Science.gov (United States)

    Substance Misuse and Addiction Prevention Finance & Management Services Health Care Services Juvenile health care provider about vitamin D and the risks and benefits of supplementation. Finance and Management Services The Division of Finance and Management Services (FMS) provides financial, administrative

  19. SERVICE QUALITY IN THE PUBLIC SERVICE

    OpenAIRE

    Prabha Ramseook-Munhurrun; Soolakshna D. Lukea-Bhiwajee; Perunjodi Naidoo

    2010-01-01

    The purpose of this paper is to obtain a better understanding of the extent to which service quality is delivered within the Mauritian public service by drawing on front-line employees (FLE) and customer perceptions of service quality. The paper investigates how closely customer expectations of service and FLE perceptions of customer expectations match. SERVQUAL is used to measure service quality amongst FLE and customers in a major public sector department in Mauritius. The survey captures c...

  20. Exploring Modularity in Services

    DEFF Research Database (Denmark)

    Avlonitis, Viktor; Hsuan, Juliana

    2017-01-01

    the effects of modularity and integrality on a range of different analytical levels in service architectures. Taking a holistic approach, the authors synthesize and empirically deploy a framework comprised of the three most prevalent themes in modularity and service design literature: Offering (service...... insights on the mirroring hypothesis of modularity theory to services. Originality/value The paper provides a conceptualization of service architectures drawing on service design, modularity, and market relationships. The study enriches service design literature with elements from modularity theory...

  1. Space Solar Power Satellite Technology Development at the Glenn Research Center: An Overview

    Science.gov (United States)

    Dudenhoefer, James E.; George, Patrick J.

    2000-01-01

    NASA Glenn Research Center (GRC). is participating in the Space Solar Power Exploratory Research and Technology program (SERT) for the development of a solar power satellite concept. The aim of the program is to provide electrical power to Earth by converting the Sun's energy and beaming it to the surface. This paper will give an overall view of the technologies being pursued at GRC including thin film photovoltaics, solar dynamic power systems, space environmental effects, power management and distribution, and electric propulsion. The developmental path not only provides solutions to gigawatt sized space power systems for the future, but provides synergistic opportunities for contemporary space power architectures. More details of Space Solar Power can be found by reading the references sited in this paper and by connecting to the web site http://moonbase.msfc.nasa.gov/ and accessing the "Space Solar Power" section "Public Access" area.

  2. Design of a K/Q-Band Beacon Receiver for the Alphasat Technology Demonstration Payload (TDP) #5 Experiment

    Science.gov (United States)

    Morse, Jacquelynne R.

    2014-01-01

    This paper describes the design and performance of a coherent KQ-band (2040 GHz) beacon receiver developed at NASA Glenn Research Center (GRC) that will be installed at the Politecnico di Milano (POLIMI) for use in the Alphasat Technology Demonstration Payload 5 (TDP5) beacon experiment. The goal of this experiment is to characterize rain fade attenuation at 40 GHz to improve the performance of existing statistical rain attenuation models in the Q-band. The ground terminal developed by NASA GRC utilizes an FFT-based frequency estimation receiver capable of characterizing total path attenuation effects due to gaseous absorption, clouds, rain, and scintillation. The receiver system has been characterized in the lab and demonstrates a system dynamic range performance of better than 58 dB at 1 Hz and better than 48 dB at 10 Hz rates.

  3. Design of a K/Q-Band Beacon Receiver for the Alphasat TDP#5 Experiment

    Science.gov (United States)

    Morse, Jacquelynne R.

    2014-01-01

    This paper describes the design and performance of a coherent KQ-band (2040 GHz) beacon receiver developed at NASA Glenn Research Center (GRC) that will be installed at the Politecnico di Milano (POLIMI) for use in the Alphasat Technology Demonstration Payload 5 (TDP5) beacon experiment. The goal of this experiment is to characterize rain fade attenuation at 40 GHz to improve the performance of existing statistical rain attenuation models in the Q-band. The ground terminal developed by NASA GRC utilizes an FFT-based frequency estimation receiver capable of characterizing total path attenuation effects due to gaseous absorption, clouds, rain, and scintillation. The receiver system has been characterized in the lab and demonstrates a system dynamic range performance of better than 58 dB at 1 Hz and better than 48 dB at 10 Hz rates.

  4. 2017 Gordon Conference on Superconductivity

    Energy Technology Data Exchange (ETDEWEB)

    Chubukov, Andrey [Univ. of Minnesota, Twin Cities, MN (United States)

    2017-11-14

    The DOE award was for a 2017 Gordon Research conference on Superconductivity (GRC). The objective of GRC is to interchange the information about the latest theoretical and experimental developments in the area of superconductivity and to select most perspective directions for future research in this area.The goal of the Gordon Conference on Superconductivity is to present and discuss the latest results in the field of modern superconductivity, discuss new ideas and new directions of research in the area. It is a long-standing tradition of the Gordon conference on Superconductivity that the vast majority of participants are junior scientists. Funding for the conference would primarily be used to support junior researchers, particularly from under-represented groups. We had more 10 female speakers, some of them junior researchers, and some funding was used to support these speakers. The conference was held together with Gordon Research Seminar on Superconductivity, where almost all speakers and participants were junior scientists.

  5. 2013 POLAR MARINE SCIENCE GORDON RESEARCH CONFERENCE AND GORDON RESEARCH SEMINAR (MARCH 10-15, 2013 - FOUR POINTS SHERATON, VENTURA CA)

    Energy Technology Data Exchange (ETDEWEB)

    Bowman, Jeff S.

    2012-12-15

    As dynamic and thermodynamic processes associated with warming trends are impacting sea ice cover, oceanographic processes and atmosphere-ocean interactions across polar regions at unprecedented rate, observations and models show fundamentally different regional ecosystem responses. The non-linear and multi-directional biogeochemical responses of polar systems to atmospheric and oceanographic forcings emphasize the need to consider and reconcile observations and models at global and regional scales. The 9th GRC on Polar Marine Science will discuss recent developments and challenges emerging from contemporary and paleo-climate observations and models, encompassing regional and global scales. The GRC addresses the structure, functionalities and controls of polar marine systems through topics such as sea ice biogeochemistry, atmosphere-ocean forcings and interactions, food web trophodynamics, carbon and elemental cycling and fluxes, and a spectrum of ecological processes and interactions.

  6. Security for a Smarter Planet

    Science.gov (United States)

    Nagaratnam, Nataraj

    Bit by bit, our planet is getting smarter. By this, we mean the systems that run, the way we live and work as a society. Three things have brought this about - the world is becoming instrumented, interconnected and intelligent. Given the planet is becoming instrumented and interconnected, this opens up more risks that need to be managed. Escalating security and privacy concerns along with a renewed focus on organizational oversight are driving governance, risk management and compliance (GRC) to the forefront of the business. Compliance regulations have increasingly played a larger role by attempting to establish processes and controls that mitigate the internal and external risks organizations have today. To effectively meet the requirements of GRC, companies must prove that they have strong and consistent controls over who has access to critical applications and data.

  7. Stirling Radioisotope Power System as an Alternative for NASAs Deep Space Missions

    Science.gov (United States)

    Shaltens, R. K.; Mason, L. S.; Schreiber, J. G.

    2001-01-01

    The NASA Glenn Research Center (GRC) and the Department of Energy (DOE) are developing a free-piston Stirling convertor for a Stirling Radioisotope Power System (SRPS) to provide on-board electric power for future NASA deep space missions. The SRPS currently being developed provides about 100 watts and reduces the amount of radioisotope fuel by a factor of four over conventional Radioisotope Thermoelectric Generators (RTG). The present SRPS design has a specific power of approximately 4 W/kg which is comparable to an RTG. GRC estimates for advanced versions of the SRPS with improved heat source integration, lightweight Stirling convertors, composite radiators, and chip-packaged controllers improves the specific mass to about 8 W/kg. Additional information is contained in the original extended abstract.

  8. Toward Better Mapping between Regulations and Operations of Enterprises Using Vocabularies and Semantic Similarity

    Directory of Open Access Journals (Sweden)

    Sagar Sunkle

    2015-12-01

    Full Text Available Industry governance, risk, and compliance (GRC solutions stand to gain from various analyses offered by formal compliance checking approaches. Such adoption is made difficult by the fact that most formal approaches assume that a mapping between concepts of regulations and models of operational specifics exists. Industry solutions offer tagging mechanisms to map regulations to operational specifics; however, they are mostly semi-formal in nature and tend to rely extensively on experts. We propose to use Semantics of Business Vocabularies and Rules along with similarity measures to create an explicit mapping between concepts of regulations and models of operational specifics of the enterprise. We believe that our work-in-progress takes a step toward adapting and leveraging formal compliance checking approaches in industry GRC solutions.

  9. Hypersonic Vehicle Propulsion System Simplified Model Development

    Science.gov (United States)

    Stueber, Thomas J.; Raitano, Paul; Le, Dzu K.; Ouzts, Peter

    2007-01-01

    This document addresses the modeling task plan for the hypersonic GN&C GRC team members. The overall propulsion system modeling task plan is a multi-step process and the task plan identified in this document addresses the first steps (short term modeling goals). The procedures and tools produced from this effort will be useful for creating simplified dynamic models applicable to a hypersonic vehicle propulsion system. The document continues with the GRC short term modeling goal. Next, a general description of the desired simplified model is presented along with simulations that are available to varying degrees. The simulations may be available in electronic form (FORTRAN, CFD, MatLab,...) or in paper form in published documents. Finally, roadmaps outlining possible avenues towards realizing simplified model are presented.

  10. High Efficiency Space Power Systems Project Advanced Space-Rated Batteries

    Science.gov (United States)

    Reid, Concha M.

    2011-01-01

    Case Western Reserve University (CWRU) has an agreement with China National Offshore Oil Corporation New Energy Investment Company, Ltd. (CNOOC), under the United States-China EcoPartnerships Framework, to create a bi-national entity seeking to develop technically feasible and economically viable solutions to energy and environmental issues. Advanced batteries have been identified as one of the initial areas targeted for collaborations. CWRU invited NASA Glenn Research Center (GRC) personnel from the Electrochemistry Branch to CWRU to discuss various aspects of advanced battery development as they might apply to this partnership. Topics discussed included: the process for the selection of a battery chemistry; the establishment of an integrated development program; project management/technical interactions; new technology developments; and synergies between batteries for automotive and space operations. Additional collaborations between CWRU and NASA GRC's Electrochemistry Branch were also discussed.

  11. Air Breathing Propulsion Controls and Diagnostics Research at NASA Glenn Under NASA Aeronautics Research Mission Programs

    Science.gov (United States)

    Garg, Sanjay

    2015-01-01

    The Intelligent Control and Autonomy Branch (ICA) at NASA (National Aeronautics and Space Administration) Glenn Research Center (GRC) in Cleveland, Ohio, is leading and participating in various projects in partnership with other organizations within GRC and across NASA, the U.S. aerospace industry, and academia to develop advanced controls and health management technologies that will help meet the goals of the NASA Aeronautics Research Mission Directorate (ARMD) Programs. These efforts are primarily under the various projects under the Advanced Air Vehicles Program (AAVP), Airspace Operations and Safety Program (AOSP) and Transformative Aeronautics Concepts Program (TAC). The ICA Branch is focused on advancing the state-of-the-art of aero-engine control and diagnostics technologies to help improve aviation safety, increase efficiency, and enable operation with reduced emissions. This paper describes the various ICA research efforts under the NASA Aeronautics Research Mission Programs with a summary of motivation, background, technical approach, and recent accomplishments for each of the research tasks.

  12. Gearbox Reliability Collaborative Bearing Calibration

    Energy Technology Data Exchange (ETDEWEB)

    van Dam, J.

    2011-10-01

    NREL has initiated the Gearbox Reliability Collaborative (GRC) to investigate the root cause of the low wind turbine gearbox reliability. The GRC follows a multi-pronged approach based on a collaborative of manufacturers, owners, researchers and consultants. The project combines analysis, field testing, dynamometer testing, condition monitoring, and the development and population of a gearbox failure database. At the core of the project are two 750kW gearboxes that have been redesigned and rebuilt so that they are representative of the multi-megawatt gearbox topology currently used in the industry. These gearboxes are heavily instrumented and are tested in the field and on the dynamometer. This report discusses the bearing calibrations of the gearboxes.

  13. NASA Lewis Steady-State Heat Pipe Code Architecture

    Science.gov (United States)

    Mi, Ye; Tower, Leonard K.

    2013-01-01

    NASA Glenn Research Center (GRC) has developed the LERCHP code. The PC-based LERCHP code can be used to predict the steady-state performance of heat pipes, including the determination of operating temperature and operating limits which might be encountered under specified conditions. The code contains a vapor flow algorithm which incorporates vapor compressibility and axially varying heat input. For the liquid flow in the wick, Darcy s formula is employed. Thermal boundary conditions and geometric structures can be defined through an interactive input interface. A variety of fluid and material options as well as user defined options can be chosen for the working fluid, wick, and pipe materials. This report documents the current effort at GRC to update the LERCHP code for operating in a Microsoft Windows (Microsoft Corporation) environment. A detailed analysis of the model is presented. The programming architecture for the numerical calculations is explained and flowcharts of the key subroutines are given

  14. Managing service excellence. Internal customer service training

    International Nuclear Information System (INIS)

    McAnulty, P.C.

    1991-01-01

    WHO ARE OUR CUSTOMERS? Electric Users, regulators, vendors, suppliers, or our own employees? The answer is ALL exclamation point They are all customers. Regardless if they are external or internal customers, one must focus on quality of service delivery in order to maintain customer satisfaction. The most successful companies are quickly realizing that managing SERVICE EX NCE is our only future. For the next decade, the issue of service quality will exceed the issue of productivity. It is very easy to see that the business behind a utility is serving our electric consumers. However, internal customer service - service excellence to employees inside a company is the foundation for success. This paper describes a training program that is being implemented across Duke Power for employees on internal customer service. How we provide service to each other within a company impacts service quality to our external customers. This training refocuses behaviors and perceptions so to concentrate on quality service delivery to our internal customers - our employees. We all have positive and negative experiences with obtaining quality service by either external organizations or internal employees. Therefore, we start with a common foundation. Whether it be a supplier, vendor, or a station administrative group, we have experienced either excellent or poor customer service. All of us have potential in managing the delivery of excellent customer service. However, many of us may need new perspectives so to add depth with which we view and manage service excellence to our internal customers

  15. Service co-innovation

    DEFF Research Database (Denmark)

    Henten, Anders; Sundbo, Jon; Sundbo, Donna

    of studies of the degree of satisfaction of the users with the services in the service encounters and studies that examine service innovation processes. The paper is based on research conducted in 21 service delivery situations in as many service companies. Drivers of and barriers to encounterbased service......This paper examines the factors affecting the innovativeness of service encounters. The assumption is that a considerable share of innovations in service industries is initiated in the service encounters. The theoretical foundation of this paper builds on a combination of research tradition...

  16. Service engineering for prospective vehicle service processes

    OpenAIRE

    Nagel, Alexander; Steinhilper, Rolf; Freiberger, Stefan; Thäter, Stefan

    2013-01-01

    Garages are - concerning the vehicle service - faced with growing complexity in automotive mechatronics and on-board bus communication technology. Because of the necessity of profound technical knowledge and smart as well as cost efficient diagnostic tools for garages, Bayreuth University and Fraunhofer IPA pick up the challenge and develop innovative service-processes for future requirements by the project "Kfz-Service Engineering 2020". In order to improve established service-processes and ...

  17. Web Services in 3G Service Platforms

    NARCIS (Netherlands)

    Lagerberg, Ko; Plas, Dirk-Jaap; Wegdam, M.

    2002-01-01

    In third-generation (3G) networks, third-party service developers will have access to the mobile network resources using open network interfaces, such as the 3rd Generation Partnership Project's (3GPP's) Open Service Access (OSA). The service platforms that offer these interfaces provide

  18. Internal Audit Service | Internal Audit Service

    Science.gov (United States)

    their internal auditing function in the areas of professional excellence, quality of service and Students and teachers Media Internal Audit Service Navbar Toggle Home About the Staff Risk Assessment and Planning Internal Audit Process Search for Search Home The mission of the Fermilab Internal Audit Service

  19. Power System Overview for the Small RPS Centaur Flyby and the Mars Polar Hard Lander NASA COMPASS Studies

    Science.gov (United States)

    Cataldo, Robert L.

    2014-01-01

    The NASA Glenn Research Center (GRC) Radioisotope Power System Program Office (RPSPO) sponsored two studies lead by their mission analysis team. The studies were performed by NASA GRCs Collaborative Modeling for Parametric Assessment of Space Systems (COMPASS) team. Typically a complete toplevel design reference mission (DRM) is performed assessing conceptual spacecraft design, launch mass, trajectory, science strategy and sub-system design such as, power, propulsion, structure and thermal.

  20. Air Breathing Propulsion Controls and Diagnostics Research at NASA Glenn Under NASA Aeronautics Research Mission Programs

    Science.gov (United States)

    Garg, Sanjay

    2014-01-01

    This lecture will provide an overview of the aircraft turbine engine control research at NASA (National Aeronautics and Space Administration) Glenn Research Center (GRC). A brief introduction to the engine control problem is first provided with a description of the current state-of-the-art control law structure. A historical aspect of engine control development since the 1940s is then provided with a special emphasis on the contributions of GRC. The traditional engine control problem has been to provide a means to safely transition the engine from one steady-state operating point to another based on the pilot throttle inputs. With the increased emphasis on aircraft safety, enhanced performance and affordability, and the need to reduce the environmental impact of aircraft, there are many new challenges being faced by the designers of aircraft propulsion systems. The Controls and Dynamics Branch (CDB) at GRC is leading and participating in various projects in partnership with other organizations within GRC and across NASA, other government agencies, the U.S. aerospace industry, and academia to develop advanced propulsion controls and diagnostics technologies that will help meet the challenging goals of NASA programs under the Aeronautics Research Mission. The second part of the lecture provides an overview of the various CDB technology development activities in aircraft engine control and diagnostics, both current and some accomplished in the recent past. The motivation for each of the research efforts, the research approach, technical challenges and the key progress to date are summarized. The technologies to be discussed include system level engine control concepts, gas path diagnostics, active component control, and distributed engine control architecture. The lecture will end with a futuristic perspective of how the various current technology developments will lead to an Intelligent and Autonomous Propulsion System requiring none to very minimum pilot interface

  1. Defense AT and L. Volume 37, Number 5

    Science.gov (United States)

    2008-10-01

    of the television show Star Trek : Deep Space Nine will immediately recognize the recurring theme of “The Rules of Acquisition.” In the Star Trek ... NASA Titan propellant, and successfully transporting and detonating the first 81,000-pound, first-stage Trident missile motor for the Navy Helping...MANPRINT program. National Aeronautics and Space Administration ( NASA )’s Commercial Technology Office (CTO) http://technology.grc.nasa.gov Promotes

  2. Small Radioisotope Power System Testing at NASA Glenn Research Center

    Science.gov (United States)

    Dugala, Gina; Bell, Mark; Oriti, Salvatore; Fraeman, Martin; Frankford, David; Duven, Dennis

    2013-01-01

    In April 2009, NASA Glenn Research Center (GRC) formed an integrated product team (IPT) to develop a Small Radioisotope Power System (SRPS) utilizing a single Advanced Stirling Convertor (ASC) with passive balancer. A single ASC produces approximately 80 We making this system advantageous for small distributed lunar science stations. The IPT consists of Sunpower, Inc., to provide the single ASC with a passive balancer, The Johns Hopkins University Applied Physics Laboratory (JHUAPL) to design an engineering model Single Convertor Controller (SCC) for an ASC with a passive balancer, and NASA GRC to provide technical support to these tasks and to develop a simulated lunar lander test stand. The single ASC with a passive balancer, simulated lunar lander test stand, and SCC were delivered to GRC and were tested as a system. The testing sequence at GRC included SCC fault tolerance, integration, electromagnetic interference (EMI), vibration, and extended operation testing. The SCC fault tolerance test characterized the SCCs ability to handle various fault conditions, including high or low bus power consumption, total open load or short circuit, and replacing a failed SCC card while the backup maintains control of the ASC. The integrated test characterized the behavior of the system across a range of operating conditions, including variations in cold-end temperature and piston amplitude, including the emitted vibration to both the sensors on the lunar lander and the lunar surface. The EMI test characterized the AC and DC magnetic and electric fields emitted by the SCC and single ASC. The vibration test confirms the SCCs ability to control the single ASC during launch. The extended operation test allows data to be collected over a period of thousands of hours to obtain long term performance data of the ASC with a passive balancer and the SCC. This paper will discuss the results of each of these tests.

  3. Integrated Micro-Power System (IMPS) Development at NASA Glenn Research Center

    Science.gov (United States)

    Wilt, David; Hepp, Aloysius; Moran, Matt; Jenkins, Phillip; Scheiman, David; Raffaelle, Ryne

    2003-01-01

    Glenn Research Center (GRC) has a long history of energy related technology developments for large space related power systems, including photovoltaics, thermo-mechanical energy conversion, electrochemical energy storage. mechanical energy storage, power management and distribution and power system design. Recently, many of these technologies have begun to be adapted for small, distributed power system applications or Integrated Micro-Power Systems (IMPS). This paper will describe the IMPS component and system demonstration efforts to date.

  4. A Communication Architecture for an Advanced Extravehicular Mobile Unit

    Science.gov (United States)

    Ivancic, William D.; Sands, Obed S.; Bakula, Casey J.; Oldham, Daniel R.; Wright, Ted; Bradish, Martin A.; Klebau, Joseph M.

    2014-01-01

    This document describes the communication architecture for the Power, Avionics and Software (PAS) 1.0 subsystem for the Advanced Extravehicular Mobility Unit (AEMU). The following systems are described in detail: Caution Warning and Control System, Informatics, Storage, Video, Audio, Communication, and Monitoring Test and Validation. This document also provides some background as well as the purpose and goals of the PAS subsystem being developed at Glenn Research Center (GRC).

  5. Gearbox Reliability Collaborative Phase 3 Gearbox 3 Test Report

    Energy Technology Data Exchange (ETDEWEB)

    Keller, Jonathan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Wallen, Robb [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-02-24

    Many gearboxes in wind turbines do not achieve their expected design life; they do, however, commonly meet or exceed the design criteria specified in current standards in the gear, bearing, and wind turbine industry as well as third-party certification criteria. The cost of gearbox replacements and rebuilds, as well as the downtime associated with these failures, increases the cost of wind energy. In 2007, the U.S. Department of Energy established the National Renewable Energy Laboratory (NREL) Gearbox Reliability Collaborative (GRC). Its goals are to understand the root causes of premature gearbox failures and to improve their reliability. The GRC is examining a hypothesis that the gap between design-estimated and actual wind turbine gearbox reliability is caused by underestimation of loads, inaccurate design tools, the absence of critical elements in the design process, or insufficient testing. This report describes the recently completed tests of GRC Gearbox 3 in the National Wind Technology Center dynamometer and documents any modifications to the original test plan. In this manner, it serves as a guide for interpreting the publicly released data sets with brief analyses to illustrate the data. The primary test objective was to measure the planetary load-sharing characteristics in the same conditions as the original GRC gearbox design. If the measured load-sharing characteristics are close to the design model, the projected improvement in planetary section fatigue life and the efficacy of preloaded TRBs in mitigating the planetary bearing fatigue failure mode will have been demonstrated. Detailed analysis of that test objective will be presented in subsequent publications.

  6. Genetic Segregation Analysis of a Rapeseed Dwarf Mutant

    International Nuclear Information System (INIS)

    Xiang, G.; Yu, S.; Zhang, T.; Zhao, J.; Lei, S.; Du, C.

    2016-01-01

    Dwarf resources in Brassica napus are very important for developing high-yield cultivars through dwarf-type and lodging-resistant breeding. However, few dwarf varieties have been available for this species. Here, we reported a new rapeseed dwarf mutant GRC1157, which exhibits obvious phenotypic variations on dwarf. Six generations (P /sub 1/, P/sub 1/, F/sub 1/, F/sub 1/, B/sub 1/, and B/sub 1/) were produced from a cross between dwarf mutant GRC1157 and an elite tall-type line XR16 to analyze genetic inheritances of plant height (PH), numbers of the 1st valid branch (VBN), main inflorescence length (MIL), pod numbers per main inflorescence (MPN), pod length (PL) and seed numbers per pod (PSN) using the mixed major gene plus polygene inheritance model. The genetic analysis shows different traits were controlled by different inheritance models: PH and PL by two pairs of additive-dominant-epistatic major genes plus additive-dominant-epistatic polygenes, MPN and PSN by two-pair additive-dominant-epistatic major genes plus additive-dominant polygenes, MIL by two-pair additive-dominant-epistatic major genes and VBN by one-pair additive-dominant major genes plus additive-dominant-epistatic polygenes. Furthermore, positive correlations between PH and some other traits were observed, suggesting that some traits may be co-regulated by several linkage or same loci/genes. In addition, high heritability (40.35-93.7 percent) were found for five traits (except VBN) in different segregating generations, indicating these traits were mainly affected by hereditary factors and suitable for early artificial selection. In sum, the dwarf mutant GRC1157 can serve as a valuable resource for rapeseed dwarf breeding and the genetic analysis in this study provided a foundation for further mapping and cloning dwarf genes in mutant GRC1157. (author)

  7. Tuning of PID load frequency controller for power systems

    International Nuclear Information System (INIS)

    Tan Wen

    2009-01-01

    PID tuning of load frequency controllers for power systems is discussed in this paper. The tuning method is based on a two-degree-of-freedom internal model control (IMC) design method, and the performance of the resulting PID controller is related to two tuning parameters thus detuning is easy when necessary. Then an anti-GRC scheme is proposed to overcome the generation rate constraints. Finally, the method is extended to two-area cases.

  8. Aircraft Turbine Engine Control Research at NASA Glenn Research Center

    Science.gov (United States)

    Garg, Sanjay

    2014-01-01

    This lecture will provide an overview of the aircraft turbine engine control research at NASA (National Aeronautics and Space Administration) Glenn Research Center (GRC). A brief introduction to the engine control problem is first provided with a description of the current state-of-the-art control law structure. A historical aspect of engine control development since the 1940s is then provided with a special emphasis on the contributions of GRC. The traditional engine control problem has been to provide a means to safely transition the engine from one steady-state operating point to another based on the pilot throttle inputs. With the increased emphasis on aircraft safety, enhanced performance and affordability, and the need to reduce the environmental impact of aircraft, there are many new challenges being faced by the designers of aircraft propulsion systems. The Controls and Dynamics Branch (CDB) at GRC is leading and participating in various projects in partnership with other organizations within GRC and across NASA, other government agencies, the U.S. aerospace industry, and academia to develop advanced propulsion controls and diagnostics technologies that will help meet the challenging goals of NASA programs under the Aeronautics Research Mission. The second part of the lecture provides an overview of the various CDB technology development activities in aircraft engine control and diagnostics, both current and some accomplished in the recent past. The motivation for each of the research efforts, the research approach, technical challenges and the key progress to date are summarized. The technologies to be discussed include system level engine control concepts, gas path diagnostics, active component control, and distributed engine control architecture. The lecture will end with a futuristic perspective of how the various current technology developments will lead to an Intelligent and Autonomous Propulsion System requiring none to very minimum pilot interface

  9. 2012 ELECTRONIC SPECTROSCOPY & DYNAMICS GORDON RESEARCH CONFERENCE, JULY 22-27, 2012

    Energy Technology Data Exchange (ETDEWEB)

    Kohler, Bern

    2012-07-27

    Topics covered in this GRC include high-resolution spectroscopy, coherent electronic energy transport in biology, excited state theory and dynamics, excitonics, electronic spectroscopy of cold and ultracold molecules, and the spectroscopy of nanostructures. Several sessions will highlight innovative techniques such as time-resolved x-ray spectroscopy, frequency combs, and liquid microjet photoelectron spectroscopy that have forged stimulating new connections between gas-phase and condensed-phase work.

  10. Meanline Analysis of Turbines with Choked Flow in the Object-Oriented Turbomachinery Analysis Code

    Science.gov (United States)

    Hendricks, Eric S.

    2016-01-01

    The Object-Oriented Turbomachinery Analysis Code (OTAC) is a new meanline/streamline turbomachinery modeling tool being developed at NASA GRC. During the development process, a limitation of the code was discovered in relation to the analysis of choked flow in axial turbines. This paper describes the relevant physics for choked flow as well as the changes made to OTAC to enable analysis in this flow regime.

  11. Power, Avionics and Software Communication Network Architecture

    Science.gov (United States)

    Ivancic, William D.; Sands, Obed S.; Bakula, Casey J.; Oldham, Daniel R.; Wright, Ted; Bradish, Martin A.; Klebau, Joseph M.

    2014-01-01

    This document describes the communication architecture for the Power, Avionics and Software (PAS) 2.0 subsystem for the Advanced Extravehicular Mobile Unit (AEMU). The following systems are described in detail: Caution Warn- ing and Control System, Informatics, Storage, Video, Audio, Communication, and Monitoring Test and Validation. This document also provides some background as well as the purpose and goals of the PAS project at Glenn Research Center (GRC).

  12. The Effects of CW-Related Chemicals on Social Behavior and Performance

    Science.gov (United States)

    1988-08-15

    Sexual Behaviors: Sexual Present Mount (no thrusting) Mount (with thrusting) Masturbate Genital Manipulation (other animal) Genital Sniff (other animal...definite place in the behavioral test battery, although it would not be practical to use it on an everyday basis because of the habituation problem...14) Vocalizaticns (15) Self directed behaviors (grc=m, masturbate , etc.) General Findings Shortly after the project began the eight adult males in I

  13. John Glenn Biomedical Engineering Consortium

    Science.gov (United States)

    Nall, Marsha

    2004-01-01

    The John Glenn Biomedical Engineering Consortium is an inter-institutional research and technology development, beginning with ten projects in FY02 that are aimed at applying GRC expertise in fluid physics and sensor development with local biomedical expertise to mitigate the risks of space flight on the health, safety, and performance of astronauts. It is anticipated that several new technologies will be developed that are applicable to both medical needs in space and on earth.

  14. Feasibility Study for Implementing Magnetic Suspension in the Glenn Research Center 225 cm2 Supersonic Wind Tunnel for Testing the Dynamic Stability of Blunt Bodies

    Science.gov (United States)

    Sevier, Abigail; Davis, David O.; Schoenenberger, Mark; Barnhart, Paul

    2016-01-01

    The implementation of a magnetic suspension system in the NASA Glenn Research Center (GRC) 225 cm2 Supersonic Wind Tunnel would be a powerful test technique that could accurately determine the dynamic stability of blunt body entry vehicles with no sting interference. This paper explores initial design challenges to be evaluated before implementation, including defining the lowest possible operating dynamic pressure and corresponding model size, developing a compatible video analysis technique, and incorporating a retractable initial support sting.

  15. Development of Reliability Based Life Prediction Methods for Thermal and Environmental Barrier Coatings in Ceramic Matrix Composites

    Science.gov (United States)

    Shah, Ashwin

    2001-01-01

    Literature survey related to the EBC/TBC (environmental barrier coating/thermal barrier coating) fife models, failure mechanisms in EBC/TBC and the initial work plan for the proposed EBC/TBC life prediction methods development was developed as well as the finite element model for the thermal/stress analysis of the GRC-developed EBC system was prepared. Technical report for these activities is given in the subsequent sections.

  16. Single sheet metal oxides and hydroxides

    DEFF Research Database (Denmark)

    Huang, Lizhi

    The synthesis of layered double hydroxides (LDHs) provides a relatively easy and traditional way to build versatile chemical compounds with a rough control of the bulk structure. The delamination of LDHs to form their single host layers (2D nanosheets) and the capability to reassemble them offer......) Delamination of the LDHs structure (oxGRC12) with the formation of single sheet iron (hydr)oxide (SSI). (3) Assembly of the new 2D nanosheets layer by layer to achieve desired functionalities....

  17. Planetary Load Sharing in Three-Point- Mounted Wind Turbine Gearboxes: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Yi [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Keller, Jonathan A [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-15

    Wind turbine gearboxes do not achieve their expected design life. The cost of gearbox replacements and rebuilds and the downtime associated with these failures increase the cost of wind energy. In 2007, the U.S. Department of Energy established the National Renewable Energy Laboratory (NREL) Gearbox Reliability Collaborative (GRC). Its goals are to understand the root causes of premature gearbox failures and improve their reliability. To date, the GRC has focused on a 750-kW drivetrain with a three-stage, three-point-mounted gearbox. A nonproprietary version of the gearbox containing CRBs with C3 clearances in the planetary stage was customized. Two of these gearboxes, GB1 and GB2, were manufactured and then tested in the National Wind Technology Center's 2.5-MW dynamometer and in the field. Major GRC findings include the detrimental effect of rotor moments on planetary load sharing and predicted fatigue, and the risk of bearing sliding in low-torque conditions for three-point configuration drivetrains. Based on the knowledge gained from testing and analysis of the original design, the GRC gearbox was redesigned to improve its load-sharing characteristics and predicted fatigue. This new gearbox is named GB3. As shown in Figure 1, its key improvement is the incorporation of preloaded TRBs that support the planet carrier and planets. Roller loads can be optimized and bearing life maximized with a small preload [4]. These preloaded bearings, along with interference-fitted planet pins, improve alignments and load-sharing characteristics. A semi-integrated planet bearing design also increases capacity and eliminates outer race fretting. Romax Technology, with Powertrain Engineers and the Timken Company (Timken), completed the redesign. Timken manufactured and instrumented the planet gears and bearings. Brad Foote Gearing manufactured the other gearing and assembled the gearbox.

  18. Assessments in the Global Peace Operations Initiative: A Systems Engineering Approach

    Science.gov (United States)

    2014-06-01

    police unit GCC GPOI Coordination Committee GIG GPOI Implementation Guide GPOI Global Peace Operations Initiative GRC GPOI Regional Committee G8...degree necessary to build a coherent assessments framework. The GPOI Implementation Guide ( GIG ) begins by alluding to what the program intended to...elements and associated interactions fully observed and understood. Using the U.S. economy as an example, Driscoll (2011) illustrates the common

  19. Pathfinding the Flight Advanced Stirling Convertor Design with the ASC-E3

    Science.gov (United States)

    Wong, Wayne A.; Wilson, Kyle; Smith, Eddie; Collins, Josh

    2012-01-01

    The Advanced Stirling Convertor (ASC) was initially developed by Sunpower, Inc. under contract to NASA Glenn Research Center (GRC) as a technology development project. The ASC technology fulfills NASA's need for high efficiency power convertors for future Radioisotope Power Systems (RPS). Early successful technology demonstrations between 2003 to 2005 eventually led to the expansion of the project including the decision in 2006 to use the ASC technology on the Advanced Stirling Radioisotope Generator (ASRG). Sunpower has delivered 22 ASC convertors of progressively mature designs to date to GRC. Currently, Sunpower with support from GRC, Lockheed Martin Space System Company (LMSSC), and the Department of Energy (DOE) is developing the flight ASC-F in parallel with the ASC-E3 pathfinders. Sunpower will deliver four pairs of ASC-E3 convertors to GRC which will be used for extended operation reliability assessment, independent validation and verification testing, system interaction tests, and to support LMSSC controller verification. The ASC-E3 and -F convertors are being built to the same design and processing documentation and the same product specification. The initial two pairs of ASC-E3 are built before the flight units and will validate design and processing changes prior to implementation on the ASC-F flight convertors. This paper provides a summary on development of the ASC technology and the status of the ASC-E3 build and how they serve the vital pathfinder role ahead of the flight build for ASRG. The ASRG is part of two of the three candidate missions being considered for selection for the Discovery 12 mission.

  20. The NATO Warsaw Summit: How to Strengthen Alliance Cohesion (Strategic Forum, Number 296)

    Science.gov (United States)

    2016-06-01

    notion of European disintegration—if it were to take hold—cannot have but the most profound im- plications for Alliance management. The rise of political...BEL SVN CAN DEU HRV NOR FRA ESP HUN GBR USA TUR DNK NLD CZE ROU PRT EST GRC LVA SVK LUX POL LTU Figure. NATO Defense Expenditure Data Source: Defence ...Danish Institute for International Studies, August 2015); Rainer L. Glatz and Martin Zapfe, NATO Defence Planning between Wales and Warsaw: Politico

  1. THE FUTURE OF SPACECRAFT NUCLEAR PROPULSION

    OpenAIRE

    Jansen, Frank

    2014-01-01

    This paper summarizes the advantages of space nuclear power and propulsion systems. It describes the actual status of international power level dependent spacecraft nuclear propulsion missions, especially the high power EU-Russian MEGAHIT study including the Russian Megawatt-Class Nuclear Power Propulsion System, the NASA GRC project and the low and medium power EU DiPoP study. Space nuclear propulsion based mission scenarios of these studies are sketched as well.

  2. An Overview of Antenna R&D Efforts in Support of NASA's Space Exploration Vision

    Science.gov (United States)

    Manning, Robert M.

    2007-01-01

    This presentation reviews the research and development work being conducted at Glenn Research Center in the area of antennas for space exploration. In particular, after reviewing the related goals of the agency, antenna technology development at GRC is discussed. The antennas to be presented are large aperture inflatable antennas, phased array antennas, a 256 element Ka-band antenna, a ferroelectric reflectarray antenna, multibeam antennas, and several small antennas.

  3. Science et Technique, Sciences de la Santé - Vol 39, No 1-2 (2016)

    African Journals Online (AJOL)

    Cardiomyopathie du péri-partum prise en charge en milieu Hospitalier Universitaire de Bobo-Dioulasso : aspects thérapeutiques et évolutifs · EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. S. J-B. Tougouma, A.A. Yaméogo, A. Dembélé, G. Kinda, N.V. Yaméogo, G.R.C. Millogo, ...

  4. AllotmentDecnService

    Data.gov (United States)

    Department of Veterans Affairs — The AllotmentDecnService is a service supporting operations to access/update data related to (Compensation and Pension) Awards. This service also supports business...

  5. ServiceNow

    Data.gov (United States)

    US Agency for International Development — A cloud based service for creating a single system of record for all types of business services used by OCIO. Service Now applications are built on a single platform...

  6. Marketing Youth Services.

    Science.gov (United States)

    Dimick, Barbara

    1995-01-01

    Marketing techniques in youth services are useful for designing programs, collections, and services and for determining customer needs. The marketing mix--product, place, price, and practice--provides a framework for service analysis. (AEF)

  7. Cancer Genetics Services Directory

    Science.gov (United States)

    ... Services Directory Cancer Prevention Overview Research NCI Cancer Genetics Services Directory This directory lists professionals who provide services related to cancer genetics (cancer risk assessment, genetic counseling, genetic susceptibility testing, ...

  8. Certification of support services

    International Nuclear Information System (INIS)

    Hroch, A.; Osusky, V.

    2006-01-01

    In this paper the process of certification of support services in the Slovenske elektrarne, a. s. is described. The nuclear power plants are also included into support services. Provisions and economic aspects of support services are discussed

  9. Telecommunications Relay Services

    Science.gov (United States)

    ... Home » Health Info » Hearing, Ear Infections, and Deafness Telecommunications Relay Services On this page: What are telecommunication ... additional information about telecommunication relay services? What are telecommunication relay services? Title IV of the Americans with ...

  10. Electronic Medical Record Service

    Data.gov (United States)

    Department of Veterans Affairs — This service provides web services used to obtain clinical data for patients. There are three service methods that allow write functionality signNote, writeNote and...

  11. Evaluating technology service options.

    Science.gov (United States)

    Blumberg, D F

    1997-05-01

    Four service and support options are available to healthcare organizations for maintaining their growth arsenals of medical and information technology. These options include maintaining and servicing all equipment using a facility-based biomedical engineering and MIS service department; using a combination of facility-based service and subcontracted service; expanding facility-based biomedical and MIS service departments to provide service to other healthcare organizations to achieve economies of scale; and outsourcing all maintenance, repair, and technical support services. Independent service companies and original equipment manufacturers (OEMs) are offering healthcare organizations a wider array of service and support capabilities than ever before. However, some health systems have successfully developed their own independent service organizations to take care of their own--and other healthcare organizations'--service and support needs.

  12. Knowledge Service Engineering Handbook

    CERN Document Server

    Kantola, Jussi

    2012-01-01

    Covering the emerging field of knowledge service engineering, this groundbreaking handbook outlines how to acquire and utilize knowledge in the 21st century. Drawn on the expertise of the founding faculty member of the world's first university knowledge engineering service department, this book describes what knowledge services engineering means and how it is different from service engineering and service production. Presenting multiple cultural aspects including US, Finnish, and Korean, this handbook provides engineering, systemic, industry, and consumer use viewpoints to knowledge service sy

  13. IT Service Management Architectures

    DEFF Research Database (Denmark)

    Tambo, Torben; Filtenborg, Jacob

    2018-01-01

    IT service providers tend to view their services as quasi-embedded in the client organisations infrastructure. Therefore, IT service providers lack a full picture of being an organisation with its own enterprise archicture. By systematically developing an enterprise architecture using the unifica...... the unification operating model, IT service providers can much more efficient develop relevant service catalogues with connected reporting services related to SLA's and KPI's based on ITIL and newer frameworks like SIAM....

  14. Central Laboratories Services

    Data.gov (United States)

    Federal Laboratory Consortium — The TVA Central Laboratories Services is a comprehensive technical support center, offering you a complete range of scientific, engineering, and technical services....

  15. Quality Management of Services

    Directory of Open Access Journals (Sweden)

    Yuriy I. Dreizis

    2016-10-01

    Full Text Available It is shown that services take the leading place in modern, post-industrial society. The world economy has passed the period of deindustrialization and became service economy. Fundamentals of service economy are not physical goods, but service. The special nature of service and its property demands the mechanism of management, other than physical goods. Ensuring necessary quality of the provided service is one of the main problems, which is put before the organization by peculiar properties of service. Therefore, quality management of service is the most important branch of management of the modern organization.

  16. A Hybrid Power Management (HPM) Based Vehicle Architecture

    Science.gov (United States)

    Eichenberg, Dennis J.

    2011-01-01

    Society desires vehicles with reduced fuel consumption and reduced emissions. This presents a challenge and an opportunity for industry and the government. The NASA John H. Glenn Research Center (GRC) has developed a Hybrid Power Management (HPM) based vehicle architecture for space and terrestrial vehicles. GRC's Electrical and Electromagnetics Branch of the Avionics and Electrical Systems Division initiated the HPM Program for the GRC Technology Transfer and Partnership Office. HPM is the innovative integration of diverse, state-of-the-art power devices in an optimal configuration for space and terrestrial applications. The appropriate application and control of the various power devices significantly improves overall system performance and efficiency. The basic vehicle architecture consists of a primary power source, and possibly other power sources, providing all power to a common energy storage system, which is used to power the drive motors and vehicle accessory systems, as well as provide power as an emergency power system. Each component is independent, permitting it to be optimized for its intended purpose. This flexible vehicle architecture can be applied to all vehicles to considerably improve system efficiency, reliability, safety, security, and performance. This unique vehicle architecture has the potential to alleviate global energy concerns, improve the environment, stimulate the economy, and enable new missions.

  17. Overview of Multi-Kilowatt Free-Piston Stirling Power Conversion Research at Glenn Research Center

    Science.gov (United States)

    Geng, Steven M.; Mason, Lee S.; Dyson, Rodger W.; Penswick, L. Barry

    2008-01-01

    As a step towards development of Stirling power conversion for potential use in Fission Surface Power (FSP) systems, a pair of commercially available 1 kW class free-piston Stirling convertors and a pair of commercially available pressure wave generators (which will be plumbed together to create a high power Stirling linear alternator test rig) have been procured for in-house testing at Glenn Research Center (GRC). Delivery of both the Stirling convertors and the linear alternator test rig is expected by October 2007. The 1 kW class free-piston Stirling convertors will be tested at GRC to map and verify performance. The convertors will later be modified to operate with a NaK liquid metal pumped loop for thermal energy input. The high power linear alternator test rig will be used to map and verify high power Stirling linear alternator performance and to develop power management and distribution (PMAD) methods and techniques. This paper provides an overview of the multi-kilowatt free-piston Stirling power conversion work being performed at GRC.

  18. Gearbox Reliability Collaborative Phase 3 Gearbox 2 Test Plan

    Energy Technology Data Exchange (ETDEWEB)

    Link, H.; Keller, J.; Guo, Y.; McNiff, B.

    2013-04-01

    Gearboxes in wind turbines have not been achieving their expected design life even though they commonly meet or exceed the design criteria specified in current design standards. One of the basic premises of the National Renewable Energy Laboratory (NREL) Gearbox Reliability Collaborative (GRC) is that the low gearbox reliability results from the absence of critical elements in the design process or insufficient design tools. Key goals of the GRC are to improve design approaches and analysis tools and to recommend practices and test methods resulting in improved design standards for wind turbine gearboxes that lower the cost of energy (COE) through improved reliability. The GRC uses a combined gearbox testing, modeling and analysis approach, along with a database of information from gearbox failures collected from overhauls and investigation of gearbox condition monitoring techniques to improve wind turbine operations and maintenance practices. Testing of Gearbox 2 (GB2) using the two-speed turbine controller that has been used in prior testing. This test series will investigate non-torque loads, high-speed shaft misalignment, and reproduction of field conditions in the dynamometer. This test series will also include vibration testing using an eddy-current brake on the gearbox's high speed shaft.

  19. Measuring Men's Gender Norms and Gender Role Conflict/Stress in a High HIV-Prevalence South African Setting.

    Science.gov (United States)

    Gottert, Ann; Barrington, Clare; Pettifor, Audrey; McNaughton-Reyes, Heath Luz; Maman, Suzanne; MacPhail, Catherine; Kahn, Kathleen; Selin, Amanda; Twine, Rhian; Lippman, Sheri A

    2016-08-01

    Gender norms and gender role conflict/stress may influence HIV risk behaviors among men; however scales measuring these constructs need further development and evaluation in African settings. We conducted exploratory and confirmatory factor analyses to evaluate the Gender Equitable Men's Scale (GEMS) and the Gender Role Conflict/Stress (GRC/S) scale among 581 men in rural northeast South Africa. The final 17-item GEMS was unidimensional, with adequate model fit and reliability (alpha = 0.79). Factor loadings were low (0.2-0.3) for items related to violence and sexual relationships. The final 24-item GRC/S scale was multidimensional with four factors: Success, power, competition; Subordination to women; Restrictive emotionality; and Sexual prowess. The scale had adequate model fit and good reliability (alpha = 0.83). While GEMS is a good measure of inequitable gender norms, new or revised scale items may need to be explored in the South African context. Adding the GRC/S scale to capture men's strain related to gender roles could provide important insights into men's risk behaviors.

  20. Mechanical properties and microstructure analysis of fly ash geopolymeric recycled concrete.

    Science.gov (United States)

    Shi, X S; Collins, F G; Zhao, X L; Wang, Q Y

    2012-10-30

    Six mixtures with different recycled aggregate (RA) replacement ratios of 0%, 50% and 100% were designed to manufacture recycled aggregate concrete (RAC) and alkali-activated fly ash geopolymeric recycled concrete (GRC). The physical and mechanical properties were investigated indicating different performances from each other. Optical microscopy under transmitted light and scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDX) were carried out in this study in order to identify the mechanism underlying the effects of the geopolymer and RA on concrete properties. The features of aggregates, paste and interfacial transition zone (ITZ) were compared and discussed. Experimental results indicate that using alkali-activated fly ash geopolymer as replacement of ordinary Portland cement (OPC) effectively improved the compressive strength. With increasing of RA contents in both RAC and GRC, the compressive strength decreased gradually. The microstructure analysis shows that, on one hand, the presence of RA weakens the strength of the aggregates and the structure of ITZs; on the other hand, due to the alkali-activated fly ash in geopolymer concrete, the contents of Portlandite (Ca(OH)(2)) and voids were reduced, as well as improved the matrix homogeneity. The microstructure of GRC was changed by different reaction products, such as aluminosilicate gel. Copyright © 2012 Elsevier B.V. All rights reserved.

  1. Qualifications manual for Inspection and Enforcement personnel. Volume I. Detailed data sheets

    International Nuclear Information System (INIS)

    Bartley, H.J.; Heyer, F.H.K.; Schwartz, E.G.; Harrison, O.J.; Krass, I.W.; Welsh, D.M.

    1978-06-01

    This document is the General Research Corporation (GRC) final report on Task I Job/Position Qualifications Statements for the Headquarters and regional position of NRC/IE. It reflects the results of upgrading, expanding, and reformating the preliminary Task I report. To accomplish this, GRC made a thorough examination of all data developed during Task I, Task II (Career Fields), Task III (Training Evaluation), and Task IV (Hiring Qualifications), to include NRC/IE comments and management decisions received. The reformated Job/Position Qualifications Statements resulting from this effort (Appendix A) identify three job qualifications categories for each position--performance, attributes, and knowledge. Two formats are provided: a summarized one for manpower management in Volume I and a detailed one for career and training management in Volume II. In addition to recommending approval of the job/position qualifications, GRC proposes their use in conjunction with the hiring qualifications in the Task IV report to update NRC/IE job descriptions

  2. Gearbox Reliability Collaborative Gearbox 1 Failure Analysis Report: December 2010 - January 2011

    Energy Technology Data Exchange (ETDEWEB)

    Errichello, R.; Muller, J.

    2012-02-01

    Unintended gearbox failures have a significant impact on the cost of wind farm operations. In 2007, NREL initiated the Gearbox Reliability Collaborative (GRC). The project combines analysis, field testing, dynamometer testing, condition monitoring, and the development and population of a gearbox failure database in a multi-pronged approach to determine why wind turbine gearboxes do not achieve their expected design life. The collaborative of manufacturers, owners, researchers, and consultants focuses on gearbox testing and modeling and the development of a gearbox failure database. Collaborative members also investigate gearbox condition monitoring techniques. Data gained from the GRC will enable designers, developers, and manufacturers to improve gearbox designs and testing standards and create more robust modeling tools. GRC project essentials include the development of two identical, heavily instrumented representative gearbox designs. Knowledge gained from the field and dynamometer tests conducted on these gearboxes builds an understanding of how the selected loads and events translate into bearing and gear response. This report contains the analysis of the first gearbox design.

  3. Test Hardware Design for Flightlike Operation of Advanced Stirling Convertors (ASC-E3)

    Science.gov (United States)

    Oriti, Salvatore M.

    2012-01-01

    NASA Glenn Research Center (GRC) has been supporting development of the Advanced Stirling Radioisotope Generator (ASRG) since 2006. A key element of the ASRG project is providing life, reliability, and performance testing of the Advanced Stirling Convertor (ASC). For this purpose, the Thermal Energy Conversion branch at GRC has been conducting extended operation of a multitude of free-piston Stirling convertors. The goal of this effort is to generate long-term performance data (tens of thousands of hours) simultaneously on multiple units to build a life and reliability database. The test hardware for operation of these convertors was designed to permit in-air investigative testing, such as performance mapping over a range of environmental conditions. With this, there was no requirement to accurately emulate the flight hardware. For the upcoming ASC-E3 units, the decision has been made to assemble the convertors into a flight-like configuration. This means the convertors will be arranged in the dual-opposed configuration in a housing that represents the fit, form, and thermal function of the ASRG. The goal of this effort is to enable system level tests that could not be performed with the traditional test hardware at GRC. This offers the opportunity to perform these system-level tests much earlier in the ASRG flight development, as they would normally not be performed until fabrication of the qualification unit. This paper discusses the requirements, process, and results of this flight-like hardware design activity.

  4. Advanced Stirling Convertor (ASC) Technology Maturation in Preparation for Flight

    Science.gov (United States)

    Wong, Wayne A.; Cornell, Peggy A.

    2012-01-01

    The Advanced Stirling Convertor (ASC) is being developed by an integrated team of Sunpower and National Aeronautics and Space Administration s (NASA s) Glenn Research Center (GRC). The ASC development, funded by NASA s Science Mission Directorate, started as a technology development effort in 2003 and has since evolved through progressive convertor builds and successful testing to demonstrate high conversion efficiency, low mass, and capability to meet long-life Radioisotope Power System (RPS) requirements. The technology has been adopted by the Department of Energy and Lockheed Martin Space Systems Company s Advanced Stirling Radioisotope Generator (ASRG), which has been selected for potential flight demonstration on Discovery 12. This paper provides an overview of the status of ASC development including the most recent ASC-E2 convertors that have been delivered to GRC and an introduction to the ASC-E3 and ASC flight convertors that Sunpower will build next. The paper also describes the technology maturation and support tasks being conducted at GRC to support ASC and ASRG development in the areas of convertor and generator extended operation, high-temperature materials, heater head life assessment, organics, nondestructive inspection, spring fatigue testing, and other reliability verification tasks.

  5. Test Hardware Design for Flight-Like Operation of Advanced Stirling Convertors

    Science.gov (United States)

    Oriti, Salvatore M.

    2012-01-01

    NASA Glenn Research Center (GRC) has been supporting development of the Advanced Stirling Radioisotope Generator (ASRG) since 2006. A key element of the ASRG project is providing life, reliability, and performance testing of the Advanced Stirling Convertor (ASC). For this purpose, the Thermal Energy Conversion branch at GRC has been conducting extended operation of a multitude of free-piston Stirling convertors. The goal of this effort is to generate long-term performance data (tens of thousands of hours) simultaneously on multiple units to build a life and reliability database. The test hardware for operation of these convertors was designed to permit in-air investigative testing, such as performance mapping over a range of environmental conditions. With this, there was no requirement to accurately emulate the flight hardware. For the upcoming ASC-E3 units, the decision has been made to assemble the convertors into a flight-like configuration. This means the convertors will be arranged in the dual-opposed configuration in a housing that represents the fit, form, and thermal function of the ASRG. The goal of this effort is to enable system level tests that could not be performed with the traditional test hardware at GRC. This offers the opportunity to perform these system-level tests much earlier in the ASRG flight development, as they would normally not be performed until fabrication of the qualification unit. This paper discusses the requirements, process, and results of this flight-like hardware design activity.

  6. Wind-US Users Guide Version 4.0

    Science.gov (United States)

    Yoder, Dennis A.

    2016-01-01

    Wind-US is a computational platform which may be used to numerically solve various sets of equations governing physical phenomena. Currently, the code supports the solution of the Euler and Navier-Stokes equations of fluid mechanics, along with supporting equation sets governing turbulent and chemically reacting flows. Wind-US is a product of the NPARC Alliance, a partnership between the NASA Glenn Research Center (GRC) and the Arnold Engineering Development Complex (AEDC) dedicated to the establishment of a national, applications-oriented flow simulation capability. The Boeing Company has also been closely associated with the Alliance since its inception, and represents the interests of the NPARC User's Association. The "Wind-US User's Guide" describes the operation and use of Wind-US, including: a basic tutorial; the physical and numerical models that are used; the boundary conditions; monitoring convergence; the files that are read and/or written; parallel execution; and a complete list of input keywords and test options. For current information about Wind-US and the NPARC Alliance, please see the Wind-US home page at http://www.grc.nasa.gov/WWW/winddocs/ and the NPARC Alliance home page at http://www.grc.nasa.gov/WWW/wind/.

  7. Performance and Facility Background Pressure Characterization Tests of NASAs 12.5-kW Hall Effect Rocket with Magnetic Shielding Thruster

    Science.gov (United States)

    Kamhawi, Hani; Huang, Wensheng; Haag, Thomas; Shastry, Rohit; Thomas, Robert; Yim, John; Herman, Daniel; Williams, George; Myers, James; Hofer, Richard; hide

    2015-01-01

    NASA's Space Technology Mission Directorate (STMD) Solar Electric Propulsion Technology Demonstration Mission (SEP/TDM) project is funding the development of a 12.5-kW Hall thruster system to support future NASA missions. The thruster designated Hall Effect Rocket with Magnetic Shielding (HERMeS) is a 12.5-kW Hall thruster with magnetic shielding incorporating a centrally mounted cathode. HERMeS was designed and modeled by a NASA GRC and JPL team and was fabricated and tested in vacuum facility 5 (VF5) at NASA GRC. Tests at NASA GRC were performed with the Technology Development Unit 1 (TDU1) thruster. TDU1's magnetic shielding topology was confirmed by measurement of anode potential and low electron temperature along the discharge chamber walls. Thermal characterization tests indicated that during full power thruster operation at peak magnetic field strength, the various thruster component temperatures were below prescribed maximum allowable limits. Performance characterization tests demonstrated the thruster's wide throttling range and found that the thruster can achieve a peak thruster efficiency of 63% at 12.5 kW 500 V and can attain a specific impulse of 3,000 s at 12.5 kW and a discharge voltage of 800 V. Facility background pressure variation tests revealed that the performance, operational characteristics, and magnetic shielding effectiveness of the TDU1 design were mostly insensitive to increases in background pressure.

  8. Gearbox Reliability Collaborative Phase 3 Gearbox 2 Test Report

    Energy Technology Data Exchange (ETDEWEB)

    Keller, Jonathan; Wallen, Robb

    2015-06-10

    Many gearboxes in wind turbines have not been achieving their expected design life [1]; they do, however, commonly meet or exceed the design criteria specified in current standards in the gear, bearing, and wind turbine industry as well as third-party certification criteria. The cost of gearbox replacements and rebuilds, as well as the downtime associated with these failures, has elevated the cost of wind energy. In 2006, the U.S. Department of Energy established the National Renewable Energy Laboratory (NREL) Gearbox Reliability Collaborative (GRC). Its key goal is to understand the root causes of premature gearbox failures and improve their reliability [2]. The GRC is examining a hypothesis that the gap between design-estimated and actual wind turbine gearbox reliability is caused by underestimation of loads, inaccurate design tools, the absence of critical elements in the design process, or insufficient testing. This test report describes the recent tests of GRC gearbox (GB) 2 in the National Wind Technology Center (NWTC) dynamometer and documents any modifications to the original test plan [3]. In this manner, it serves as a guide for interpreting the publicly released data sets with brief analyses to illustrate the data. Specific objectives of the test were to assess the effect of dynamic nontorque load (NTL) on the planetary section, generator misalignment on the highspeed shaft (HSS), and field representative conditions on the gearbox in general. Detailed analysis of those test objectives will be presented in subsequent publications.

  9. Economic viewpoints on ecosystem services

    NARCIS (Netherlands)

    Silvis, H.J.; Heide, van der C.M.

    2013-01-01

    to help determine the different values of ecosystems. Ecosystem services are usually divided into four categories: provisioning services, regulating services, cultural services and habitat services (previously denoted as supporting services). This overview highlights economic theories about

  10. Field services experiences

    International Nuclear Information System (INIS)

    Colflesh, J.A.; Kruse, P.W.; Merluzzi, R.A.

    1985-01-01

    Combustion Engineering (C-E) is a large diversified manufacturer of products and services for the energy field. At this time, C-E has supplied the nuclear steam supply systems for eleven operating nuclear power plants with two additional units currently undergoing start-up testing. The focus of C-E's commitment in the nuclear power plant services area is the Nuclear Services organization within the Nuclear Power Systems Division. The Nuclear Services organization provides services on a timely cost efficient basis; and dedicates resources to developing new products and services which are truly responsive to the needs of operating power plants world wide. In the paper, C-E's capabilities and experience in the field of nuclear services are described. Highlighted are our capabilities in the areas of transition management services, operating services and engineering services

  11. Service Modularity and Architecture

    DEFF Research Database (Denmark)

    Brax, Saara A.; Bask, Anu; Hsuan, Juliana

    2017-01-01

    , platform-based and mass-customized service business models, comparative research designs, customer perspectives and service experience, performance in context of modular services, empirical evidence of benefits and challenges, architectural innovation in services, modularization in multi-provider contexts......Purpose: Services are highly important in a world economy which has increasingly become service driven. There is a growing need to better understand the possibilities for, and requirements of, designing modular service architectures. The purpose of this paper is to elaborate on the roots...... of the emerging research stream on service modularity, provide a concise overview of existing work on the subject, and outline an agenda for future research on service modularity and architecture. The articles in the special issue offer four diverse sets of research on service modularity and architecture. Design...

  12. Virtual Web Services

    OpenAIRE

    Rykowski, Jarogniew

    2007-01-01

    In this paper we propose an application of software agents to provide Virtual Web Services. A Virtual Web Service is a linked collection of several real and/or virtual Web Services, and public and private agents, accessed by the user in the same way as a single real Web Service. A Virtual Web Service allows unrestricted comparison, information merging, pipelining, etc., of data coming from different sources and in different forms. Detailed architecture and functionality of a single Virtual We...

  13. Large Retailers’ Financial Services

    OpenAIRE

    Risso, Mario

    2010-01-01

    Over the last few years, large retailers offering financial services have considerably grown in the financial services sector. Retailers are increasing the wideness and complexity of their offer of financial services. Large retail companies provide financial services to their customers following different strategic ways. The provision of financial services in the retailers offer is implemented in several different ways related to the strategies, the structures and the degree of financial know...

  14. Full Service Leasing

    OpenAIRE

    Richter, Ján

    2009-01-01

    Aim of this master thesis is to describe the service of Full Service Leasing, as a modern form of financing and management of assets, primarily automobile fleet. Description of full service leasing is designed as a comprehensive and complete guide to support reader's position when deciding to finance and manage a fleet by this service. Whether the reader is an entrepreneur, CFO, fleet manager, new employee of leasing company, or anyone who is interested in this service, this master thesis wil...

  15. Multimedia services in intelligent environments recommendation services

    CERN Document Server

    Virvou, Maria; Jain, Lakhmi

    2013-01-01

    Multimedia services are now commonly used in various activities in the daily lives of humans. Related application areas include services that allow access to large depositories of information, digital libraries, e-learning and e-education, e-government and e-governance, e-commerce and e-auctions, e-entertainment, e-health and e-medicine, and e-legal services, as well as their mobile counterparts (i.e., m-services). Despite the tremendous growth of multimedia services over the recent years, there is an increasing demand for their further development. This demand is driven by the ever-increasing desire of society for easy accessibility to information in friendly, personalized and adaptive environments. In this book at hand, we examine recent Recommendation Services. Recommendation services appear in the mobile environment, medicine/biology, tourism, education, and so on. The book includes ten chapters, which present various recently developed recommendation services. This research book is directed to professors...

  16. Logistics service management; differentiating the logistics service

    NARCIS (Netherlands)

    Veeken, van der D.J.M.; Rutten, W.G.M.M.

    1998-01-01

    In this article a model is described, which enables differentiation of the logistics service that a company offers to its customers. Differentiating this service is essential for businesses with a large variation within their customer and/or products portfolio. The model consists of four phases:

  17. Producer services, economic geography, and services tradability

    NARCIS (Netherlands)

    de Vaal, A; van den Berg, M

    We investigate how the incorporation of producer services linkages affects the outcome of an economic geography model. We specify the production of manufactures such that a variety of producer services is needed to transform tradable unfinished goods into final consumption goods. We find that

  18. NASA's Bio-Inspired Acoustic Absorber Concept

    Science.gov (United States)

    Koch, L. Danielle

    2017-01-01

    Transportation noise pollutes our worlds cities, suburbs, parks, and wilderness areas. NASAs fundamental research in aviation acoustics is helping to find innovative solutions to this multifaceted problem. NASA is learning from nature to develop the next generation of quiet aircraft.The number of road vehicles and airplanes has roughly tripled since the 1960s. Transportation noise is audible in nearly all the counties across the US. Noise can damage your hearing, raise your heart rate and blood pressure, disrupt your sleep, and make communication difficult. Noise pollution threatens wildlife when it prevents animals from hearing prey, predators, and mates. Noise regulations help drive industry to develop quieter aircraft. Noise standards for aircraft have been developed by the International Civil Aviation Organization and adopted by the US Federal Aviation Administration. The US National Park Service is working with the Federal Aviation Administration to try to balance the demand for access to the parks and wilderness areas with preservation of the natural soundscape. NASA is helping by conceptualizing quieter, more efficient aircraft of the future and performing the fundamental research to make these concepts a reality someday. Recently, NASA has developed synthetic structures that can absorb sound well over a wide frequency range, and particularly below 1000 Hz, and which mimic the acoustic performance of bundles of natural reeds. We are adapting these structures to control noise on aircraft, and spacecraft. This technology might be used in many other industrial or architectural applications where acoustic absorbers have tight constraints on weight and thickness, and may be exposed to high temperatures or liquids. Information about this technology is being made available through reports and presentations available through the NASA Technical Report Server, http:ntrs.nasa.gov. Organizations who would like to collaborate with NASA or commercialize NASAs technology

  19. Rotordynamic Analysis and Feasibility Study of a Disk Spin Test Facility for Rotor Health Monitoring

    Science.gov (United States)

    Sawicki, Jerzy T.

    2005-01-01

    Recently, National Aeronautics and Space Administration (NASA) initiated a program to achieve the significant improvement in aviation safety. One of the technical challenges is the design and development of accelerated experiments that mimic critical damage cases encountered in engine components. The Nondestructive Evaluation (NDE) Group at the NASA Glenn Research Center (GRC) is currently addressing the goal concerning propulsion health management and the development of propulsion system specific technologies intended to detect potential failures prior to catastrophe. For this goal the unique disk spin simulation system was assembled at NASA GRC, which allows testing of rotors with the spinning speeds up to 10K RPM, and at the elevated temperature environment reaching 540 C (1000 F). It is anticipated that the facility can be employed for detection of Low Cycle Fatigue disk cracking and further High Cycle Fatigue blade vibration. The controlled crack growth studies at room and elevated temperatures can be conducted on the turbine wheels, and various NDE techniques can be integrated and assessed as in-situ damage monitoring tools. Critical rotating parts in advanced gas turbine engines such as turbine disks frequently operate at high temperature and stress for long periods of time. The integrity of these parts must be proven by non-destructive evaluation (NDE) during various machining steps ranging from forging blank to finished shape, and also during the systematic overhaul inspections. Conventional NDE methods, however, have unacceptable limits. Some of these techniques are time-consuming and inconvenient for service aircraft testing. Almost all of these techniques require that the vicinity of the damage is known in advance. These experimental techniques can provide only local information and no indication of the structural strength at a component and/or system level. The shortcomings of currently available NDE methods lead to the requirement of new damage

  20. Web services foundations

    CERN Document Server

    Bouguettaya, Athman; Daniel, Florian

    2013-01-01

    Web services and Service-Oriented Computing (SOC) have become thriving areas of academic research, joint university/industry research projects, and novel IT products on the market. SOC is the computing paradigm that uses Web services as building blocks for the engineering of composite, distributed applications out of the reusable application logic encapsulated by Web services. Web services could be considered the best-known and most standardized technology in use today for distributed computing over the Internet.Web Services Foundations is the first installment of a two-book collection coverin

  1. New Service Status Board

    CERN Multimedia

    2013-01-01

    On Monday 14 October, the Service Status Board for GS and IT will change. The new Status Board will be integrated with the CERN Service Portal and with the CERN Service Catalogue.   As of today, the SSB will display “Service Incidents”, “Planned Interventions” and “Service Changes”. References valid from 14 October: CERN SSB at https://cern.ch/ssb Computing SSB (previously IT SSB) at https://cern.ch/itssb   Nicole Cremel, IT and GS Service Management Support

  2. Medical Virtual Public Services

    Directory of Open Access Journals (Sweden)

    Iulia SURUGIU

    2008-01-01

    Full Text Available The healthcare enterprises are very disconnected. This paper intends to propose a solution that will provide citizens, businesses and medical enterprises with improved access to medical virtual public services. Referred medical services are based on existing national medical Web services and which support medically required services provided by physicians and supplementary health care practitioners, laboratory services and diagnostic procedures, clinics and hospitals’ services. Requirements and specific rules of these medical services are considered, and personalization of user preferences will to be supported. The architecture is based on adaptable process management technologies, allowing for virtual services which are dynamically combined from existing national medical services. In this way, a comprehensive workflow process is set up, allowing for service-level agreements, an audit trail and explanation of the process to the end user. The process engine operates on top of a virtual repository, providing a high-level semantic view of information retrieved from heterogeneous information sources, such as national sources of medical services. The system relies on a security framework to ensure all high-level security requirements are met. System’s architecture is business oriented: it focuses on Service Oriented Architecture - SOA concepts, asynchronously combining Web services, Business Process Management – BPM rules and BPEL standards.

  3. The Customer Service Experience.

    Science.gov (United States)

    Bell, Chip R.

    2001-01-01

    Discusses ways to embed customer service learning and customer loyalty including making customers think, examining every aspect of customers' service encounters with staff, providing follow-up, making learning fun, and involving customers in your business. (JOW)

  4. Reusable Component Services

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Reusable Component Services (RCS) is a super-catalog of components, services, solutions and technologies that facilitates search, discovery and collaboration in...

  5. Emergency Medical Services

    Science.gov (United States)

    ... need help right away, you should use emergency medical services. These services use specially trained people and ... emergencies, you need help where you are. Emergency medical technicians, or EMTs, do specific rescue jobs. They ...

  6. SSN Verification Service

    Data.gov (United States)

    Social Security Administration — The SSN Verification Service is used by Java applications to execute the GUVERF02 service using the WebSphere/CICS Interface. It accepts several input data fields...

  7. State of Services Report

    Data.gov (United States)

    Social Security Administration — A comprehensive monthly report portraying customer experience with our various service options. The State of Services is shared with the ACOSS and is presented to...

  8. VIERS- User Preference Service

    Data.gov (United States)

    Department of Veterans Affairs — The Preferences service provides a means to store, retrieve, and manage user preferences. The service supports definition of enterprise wide preferences, as well as...

  9. NAIP Public Image Services

    Data.gov (United States)

    Farm Service Agency, Department of Agriculture — This map provides a preview and information about the National Agriculture Imagery Program (NAIP) image services available on the APFO public image server. Click on...

  10. Appropriate levels of service

    CSIR Research Space (South Africa)

    Wall, K

    2010-02-01

    Full Text Available The term "services", as used in this article, broadly refers to infrastructure (in particular, civil and electrical engineering infrastructure), and also the infrastructure elements such as schools, clinics and halls. The term "basic services...

  11. Industry Service - Technology Centre

    DEFF Research Database (Denmark)

    Hollensen, Svend; Grünbaum, Niels Nolsøe

    2011-01-01

    The chapter describes and explains the development of an Industry Service Technology (IS-T) portal solution at Danfoss for testing of products, including booking system for standardised 'service packages' in order to reduce waiting time....

  12. Improving Internal Customer Service

    Science.gov (United States)

    1990-09-01

    34Companies are recognizing that treating customers and associates like people has a very high value" (21:20). 2 Customer service has become more that... customer service is also a strategy with the focus towards people , not product (24:1). Customers are demanding quality service for several reasons...34 (39:45). External Customers . External customers are an organization’s ultimate consumers . They purchase the end product or service an organization

  13. Service Level Status

    CERN Multimedia

    Lopienski, S

    2007-01-01

    Nowadays, IT departments provide, and people use, computing services of an increasingly heterogeneous nature. There is thus a growing need for a status display that groups these different services and reports status and availability in a uniform way. The Service Level Status (SLS) system addresses these needs by providing a web-based display that dynamically shows availability, basic information and statistics about various IT services, as well as the dependencies between them.

  14. Communications and media services

    Science.gov (United States)

    Mcculla, James W.; Kukowski, James F.

    1990-01-01

    NASA's internal and external communication methods are reviewed. NASA information services for the media, for the public, and for employees are discussed. Consideration is given to electron information distribution, the NASA TV-audio system, the NASA broadcast news service, astronaut appearances, technology and information exhibits, speaker services, and NASA news reports for internal communications. Also, the NASA worldwide electronic mail network is described and trends for future NASA communications and media services are outlined.

  15. Talking about Customer Service.

    Science.gov (United States)

    Talley, Mary; Axelroth, Joan

    2001-01-01

    Discusses customer service in information centers and how to define it. Topics include the effects of competition, that give customers more choices; defining customers, and defining services; communications; physical environment; change, in customers and in technology; measuring customer service; and evaluating policies and procedures. (LRW)

  16. Collaborative Business Services Provision

    NARCIS (Netherlands)

    Camarinha-Matos, L.M.; Afsarmanesh, H.; Oliveira, A.I.; Ferrada, F.; Hammoudi, S.; Maciaszek, L.A.; Cordeiro, J.; Dietz, J.L.G.

    2013-01-01

    The association of services to manufactured products, leading to service-enhanced products, is an important mechanism for value creation and differentiation. This is particularly relevant in the case of complex, highly customized and long-life products. Suitable servicing in this context typically

  17. Managing evolving services

    NARCIS (Netherlands)

    Papazoglou, M.; Andrikopoulos, V.; Benbernou, S.

    2011-01-01

    Services are subject to constant change and variation, leading to continuous redesign and improvement. However, service changes shouldn't be disruptive by requiring radical modifications or by altering the way that business is conducted. In this article, we discuss a causal model of service changes

  18. Types of Services

    NARCIS (Netherlands)

    Vissers, C.A.; van Sinderen, Marten J.; Pras, Aiko

    In the following, the diversity of services which a distributed system can provide is illustrated, and a main classification of services is presented. Services are described in an informal but abstract way, conforming with the current descriptions used by ISO in its OSI/RM related (draft) standards.

  19. Leadership in Children's Services

    Science.gov (United States)

    Booker, Roger

    2012-01-01

    This paper examines the different contexts for leadership in children's services with a particular focus on integrated working. It reviews contemporary theories that appear to offer relevant frameworks for thinking about children's service leadership. It is argued that children's services require leadership at all levels to enable a dynamic,…

  20. New Services Development

    Directory of Open Access Journals (Sweden)

    Peter Ciganek

    2004-01-01

    Full Text Available Dynamic changes in traditional technologies and rising of new technologies call for development of new services. If service providers want to stay on information technologies market, they must keep track with this trend and adjust their services to customer requirements or develop new services. New applications will mainly depend on communication bandwidth and end users ability to handle it. If network providers will be able to ensure necessary bandwidth, there will be nothing that can stop service providers and developers in new service development. People know about growing necessity of new service and ask for them, but they hardly understand that the most important thing for service providers is merchantability and economic return of resources they gave to the developmentand implementation. By the lack of flexible development environment that is able to develop, test and provide final service for operation, new service development is not easy. There are different new service design procedures for various technological and user areas. This is the reason why this paper provides brief description of new service development procedure from technological and administrative point of view.

  1. Rights to ecosystem services

    NARCIS (Netherlands)

    Davidson, M.

    2014-01-01

    Ecosystem services are the benefits people obtain from ecosystems. Many of these services are provided outside the borders of the land where they are produced; this article investigates who is entitled to these non-excludable ecosystem services from two libertarian perspectives. Taking a

  2. A comprehensive psychiatric service

    DEFF Research Database (Denmark)

    Wang, A G

    1984-01-01

    A comprehensive psychiatric service was established in 1969 in the Faroe Islands. This service was created as a department of a general hospital. The spheres covered by this department, operating in the midst of the community were: acute and chronic patients, a liaison-psychiatric service...

  3. The service of public services performance management

    DEFF Research Database (Denmark)

    Lystbæk, Christian Tang

    perspectives on the potential impact of public service performance measurement offer a range of contradictory propositions. Its alleged benefits include public assurance, better functioning of supply markets for public services, and direct improvements of public services. But the literature also demonstrates...... the existence of significant concern about the actual impact, the costs and unintended consequences associated with performance measurement.  Performance measurement and management have been part of the political agenda within the public sphere since their adoption in the post-Second World War period...... of political masters and their mistresses rather than public service. Another area of concern is the cost of performance measurement. Hood & Peters (2004:278) note that performance measurement is likely to “distract middle- and upper-level officials, create massive paperwork, and produce major unintended...

  4. The service of public services performance measurement

    DEFF Research Database (Denmark)

    Lystbæk, Christian Tang

    2014-01-01

    that performance measurement serves as “rituals of verification” which promotes the interests of political masters and their mistresses rather than public service. Another area of concern is the cost of performance measurement. Hood & Peters (2004:278) note that performance measurement is likely to “distract...... measurement suggests a range of contested and contradictory propositions. Its alleged benefits include public assurance, better functioning of supply markets for public services, and direct improvements of public services. But the literature also demonstrates the existence of significant concern about...... the actual impact, the costs and unintended consequences associated with performance measurement. This paper identifies the main rationales and rationalities in the scholarly discourse on public services performance measurement. It concludes with some suggestions on how to deal with the many rationales...

  5. The Uniframe .Net Web Service Discovery Service

    National Research Council Canada - National Science Library

    Berbeco, Robert W

    2003-01-01

    Microsoft .NET allows the creation of distributed systems in a seamless manner Within NET small, discrete applications, referred to as Web services, are utilized to connect to each other or larger applications...

  6. The Uniframe .Net Web Service Discovery Service

    National Research Council Canada - National Science Library

    Berbeco, Robert W

    2003-01-01

    ...) and registered with Internet Information Server (IIS), and can be applied in numerous fashions This project uses the NET capabilities to create a distributed discovery service (called as UNWSDS...

  7. Triple Play Service and IPTV Services Offered within it

    Directory of Open Access Journals (Sweden)

    Dagmar Pajdusakova

    2008-01-01

    Full Text Available This paper deals with Triple Play multimedia service and figures its architecture. Triple Play offers voice, video and data services together in one customer connection. There is offered IPTV (Internet Protocol Television service within this service, where we can include also Video on Demand service and other different additional services. In the paper is described classification of Video on Demand services.

  8. Broadband Radio Service (BRS) and Educational Broadband Service (EBS) Transmitters

    Data.gov (United States)

    Department of Homeland Security — The Broadband Radio Service (BRS), formerly known as the Multipoint Distribution Service (MDS)/Multichannel Multipoint Distribution Service (MMDS), is a commercial...

  9. NPP service life management

    International Nuclear Information System (INIS)

    Elagin, Yu.P.

    2001-01-01

    Problems of NPP service life management and service life prolongation are reviewed. Methods for the prolongation of the French NPP service life are discussed, priority directions of nuclear block service life management in regard to aging in the context of the European program of investigation into the materials aging are identified. Questions of the provision of the 60 years service life of the Mihama 1 block (Japan) and decision of the problem of the control equipment aging in Great Britain are discussed. Situation with the prolongation of licenses on the NPP operation in the USA and Spain is considered [ru

  10. Vehicle to Vehicle Services

    DEFF Research Database (Denmark)

    Brønsted, Jeppe Rørbæk

    2008-01-01

    location aware infotainment, increase safety, and lessen environmental strain. This dissertation is about service oriented architecture for pervasive computing with an emphasis on vehicle to vehicle applications. If devices are exposed as services, applications can be created by composing a set of services...... be evaluated. Service composition mechanisms for pervasive computing are categorized and we discuss how the characteristics of pervasive computing can be supported by service composition mechanisms. Finally, we investigate how to make pervasive computing systems capable of being noticed and understood...

  11. Advanced web services

    CERN Document Server

    Bouguettaya, Athman; Daniel, Florian

    2013-01-01

    Web services and Service-Oriented Computing (SOC) have become thriving areas of academic research, joint university/industry research projects, and novel IT products on the market. SOC is the computing paradigm that uses Web services as building blocks for the engineering of composite, distributed applications out of the reusable application logic encapsulated by Web services. Web services could be considered the best-known and most standardized technology in use today for distributed computing over the Internet. This book is the second installment of a two-book collection covering the state-o

  12. High availability IT services

    CERN Document Server

    Critchley, Terry

    2014-01-01

    This book starts with the basic premise that a service is comprised of the 3Ps-products, processes, and people. Moreover, these entities and their sub-entities interlink to support the services that end users require to run and support a business. This widens the scope of any availability design far beyond hardware and software. It also increases the potential for service failure for reasons beyond just hardware and software; the concept of logical outages. High Availability IT Services details the considerations for designing and running highly available ""services"" and not just the systems

  13. Services Supporting the Customer

    DEFF Research Database (Denmark)

    Gremyr, Ida; Halldorsson, Arni; Hsuan, Juliana

    2017-01-01

    This paper focuses on customer and user experience of advanced service offerings, focusing mechanisms such as e.g. feedback processes as a means to utilise and learn from users’ experiences. The purpose is to understand how servitization changes the constellation of actors in aftermarket value...... creation, and what mechanisms are needed for firms to exploit the interactions in these new constellation as a basis for service improvement and development. By studying two manufacturing firms offering advanced services, this paper points to changed actor configurations (both intra- and inter......-organisational) and interaction mechanisms (existing and new) when transitioning to offering more advanced services such as “services supporting customers”....

  14. Avaliação do uso de glyphosate em soja geneticamente modificada e sua relação com o ácido chiquímico Evaluation of glyphosate application on transgenic soybean and its relationship with shikimic acid

    Directory of Open Access Journals (Sweden)

    D.A.S. Franco

    2012-09-01

    plantas de soja transgênica no campo quando tratadas de forma isolada com glyphosate. Os resultados também mostraram exsudação radicular do glyphosate por soja transgênica, com posterior absorção por soja convencional. Foram detectados resíduos de glyphosate e ácido aminometilfosfônico na solução nutritiva.Glyphosate [N-(phosphonomethyl glycine]-resistant crops (GRC are the transgenic crops most extensively grown worldwide, with soybean being the major GRC. It is important to evaluate the impact of glyphosate on transgenic soybean and its relationship with shikimic acid. A field experiment was conducted at Engenheiro Coelho-SP, Brazil, during the agricultural year 2007/2008 to evaluate the effect of glyphosate on the growth, development, and seed quality of GRC soybean variety BRS Valiosa RR. A randomized block design was used with four replications. Glyphosate was applied at 720 and 960 g a.e. ha-1 (acid equivalent and in sequence at the doses 720/720, 960/720, and 960/720/720 g a.e. ha-1 (acid equivalent. To evaluate transfer from GRC soybean to non GRC soybean cultivated in nutrient solution, a pot experiment was conducted at Instituto Biológico, SP, Brazil. Glyphosate was applied on the GRC soybean (M8045RR at 2,400 g a.e. ha-1. Both GRC soybean and non GRC soybean were sown in the same box with nutrient solution. At 0, 1, 3, 7, and 10 days after application, shikimic acid was measured by HPLC and the glyphosate and aminomethylphosphonic acid (AMPA levels in nutrient solution were determined by GC-MS. The results showed that yield, plant height, seed oil, and protein contents were not affected by glyphosate application. GRC soybean accumulated shikimic acid in the field. Glyphosate and AMPA were released through the roots of GRC soybean, and subsequently taken up by non-GRC soybean, exerting inhibitory effects on their shikimic pathway.

  15. Data mining for service

    CERN Document Server

    2014-01-01

    Virtually all nontrivial and modern service related problems and systems involve data volumes and types that clearly fall into what is presently meant as "big data", that is, are huge, heterogeneous, complex, distributed, etc. Data mining is a series of processes which include collecting and accumulating data, modeling phenomena, and discovering new information, and it is one of the most important steps to scientific analysis of the processes of services.  Data mining application in services requires a thorough understanding of the characteristics of each service and knowledge of the compatibility of data mining technology within each particular service, rather than knowledge only in calculation speed and prediction accuracy. Varied examples of services provided in this book will help readers understand the relation between services and data mining technology. This book is intended to stimulate interest among researchers and practitioners in the relation between data mining technology and its application to ...

  16. Service mining framework and application

    CERN Document Server

    Chang, Wei-Lun

    2014-01-01

    The shifting focus of service from the 1980s to 2000s has proved that IT not only lowers the cost of service but creates avenues to enhance and increase revenue through service. The new type of service, e-service, is mobile, flexible, interactive, and interchangeable. While service science provides an avenue for future service researches, the specific research areas from the IT perspective still need to be elaborated. This book introduces a novel concept-service mining-to address several research areas from technology, model, management, and application perspectives. Service mining is defined as "a systematical process including service discovery, service experience, service recovery, and service retention to discover unique patterns and exceptional values within the existing services." The goal of service mining is similar to data mining, text mining, or web mining, and aims to "detect something new" from the service pool. The major difference is the feature of service is quite distinct from the mining targe...

  17. Focusing on customer service.

    Science.gov (United States)

    1996-01-01

    This booklet is devoted to a consideration of how good customer service in family planning programs can generate demand for products and services, bring customers back, and reduce costs. Customer service is defined as increasing client satisfaction through continuous concern for client preferences, staff accountability to clients, and respect for the rights of clients. Issues discussed include the introduction of a customer service approach and gaining staff commitment. The experience of PROSALUD in Bolivia in recruiting appropriate staff, supervising staff, soliciting client feedback, and marketing services is offered as an example of a successful customer service approach. The key customer service functions are described as 1) establishing a welcoming atmosphere, 2) streamlining client flow, 3) personalizing client services, and 4) organizing and providing clear information to clients. The role of the manager in developing procedures is explored, and the COPE (Client-Oriented Provider-Efficient) process is presented as a good way to begin to make improvements. Techniques in staff training in customer service include brainstorming, role playing, using case studies (examples of which are provided), and engaging in practice sessions. Training also leads to the development of effective customer service attitudes, and the differences between these and organizational/staff-focused attitudes are illustrated in a chart. The use of communication skills (asking open-ended questions, helping clients express their concerns, engaging in active listening, and handling difficult situations) is considered. Good recovery skills are important when things go wrong. Gathering and using client feedback is the next topic considered. This involves identifying, recording, and discussing customer service issues as well as taking action on these issues and evaluating the results. The booklet ends by providing a sample of customer service indicators, considering the maintenance of a

  18. Building Service Provider Capabilities

    DEFF Research Database (Denmark)

    Brandl, Kristin; Jaura, Manya; Ørberg Jensen, Peter D.

    2015-01-01

    In this paper we study whether and how the interaction between clients and the service providers contributes to the development of capabilities in service provider firms. In situations where such a contribution occurs, we analyze how different types of activities in the production process...... process. We find that clients influence the development of human capital capabilities and management capabilities in reciprocally produced services. While in sequential produced services clients influence the development of organizational capital capabilities and management capital capabilities....... of the services, such as sequential or reciprocal task activities, influence the development of different types of capabilities. We study five cases of offshore-outsourced knowledge-intensive business services that are distinguished according to their reciprocal or sequential task activities in their production...

  19. LOCKS AND KEYS SERVICE

    CERN Multimedia

    Locks and Keys Service

    2002-01-01

    The Locks and Keys service (ST/FM) will move from building 55 to building 570 from the 2nd August to the 9th August 2002 included. During this period the service will be closed. Only in case of extreme urgency please call the 164550. Starting from Monday, 12th August, the Locks and Keys Service will continue to follow the activities related to office keys (keys and locks) and will provide the keys for furniture. The service is open from 8h30 to 12h00 and from 13h00 to 17h30. We remind you that your divisional correspondents can help you in the execution of the procedures. We thank you for your comprehension and we remain at your service to help you in solving all the matters related to keys for offices and furniture. Locks and Keys Service - ST Division - FM Group

  20. Service innovation in China

    DEFF Research Database (Denmark)

    Slepniov, Dmitrij; Jin, Jun

    2014-01-01

    Purpose – The aim of this paper is to advance our understanding of service innovation in China and to identify the major drivers and impediments for manufacturing companies pushing into services in China. Design/methodology/approach – By employing an in-depth longitudinal case of a Chinese company...... Chinese cities. Both internal and external factors played a significant role in influencing the development and implementation of service innovation in the case. The paper details and discusses the factors that affect service innovation in China. Research Limitations – The study is exposed...... in informing our expectations about the push of many Chinese manufacturing companies into services. The paper provides insights into the development and diffusion of service innovation in many fast transforming industrial companies in China. Lessons for other developing countries can also be drawn from...

  1. Automatic Photoelectric Telescope Service

    International Nuclear Information System (INIS)

    Genet, R.M.; Boyd, L.J.; Kissell, K.E.; Crawford, D.L.; Hall, D.S.; BDM Corp., McLean, VA; Kitt Peak National Observatory, Tucson, AZ; Dyer Observatory, Nashville, TN)

    1987-01-01

    Automatic observatories have the potential of gathering sizable amounts of high-quality astronomical data at low cost. The Automatic Photoelectric Telescope Service (APT Service) has realized this potential and is routinely making photometric observations of a large number of variable stars. However, without observers to provide on-site monitoring, it was necessary to incorporate special quality checks into the operation of the APT Service at its multiple automatic telescope installation on Mount Hopkins. 18 references

  2. Satellite services system overview

    Science.gov (United States)

    Rysavy, G.

    1982-01-01

    The benefits of a satellite services system and the basic needs of the Space Transportation System to have improved satellite service capability are identified. Specific required servicing equipment are discussed in terms of their technology development status and their operative functions. Concepts include maneuverable television systems, extravehicular maneuvering unit, orbiter exterior lighting, satellite holding and positioning aid, fluid transfer equipment, end effectors for the remote manipulator system, teleoperator maneuvering system, and hand and power tools.

  3. Mapping Ecosystem Services

    OpenAIRE

    Georgiev,Teodor; Burkhard,Benjamin; Maes,Joachim

    2017-01-01

    Ecosystem services are the contributions of ecosystem structure and function (in combination with other inputs) to human well-being. That means, humankind is strongly dependent on well-functioning ecosystems and natural capital that are the base for a constant flow of ecosystem services from nature to society. Therefore ecosystem services have the potential to become a major tool for policy and decision making on global, national, regional and local scales. Possible applications are manifold:...

  4. Privacy and internet services

    OpenAIRE

    Samec, Marek

    2010-01-01

    This thesis is focused on internet services user privacy. Goal of this thesis is to determine level of user awareness of how is their privacy approached while using internet services. Then suggest procedure to improve this awareness, or that will lead to better control of individual privacy. In theoretical part I analyze general and legislative approach to privacy, followed by analysis of behaviour of internet service users and providers. Part of this analysis deals with usage of web cookies ...

  5. Productivity in Public Services

    OpenAIRE

    Helen Simpson

    2007-01-01

    This paper discusses issues arising in the measurement of productivity in public services. Compared to measuring productivity in the private sector difficulties arise because the output of public services is often un-priced and because some public services are consumed collectively. A key problem is measuring the full range of outputs and quality improvements delivered by public sector organisations that are valued by society. Without comprehensive measures of output productivity statistics m...

  6. Marketing Auditing Services

    OpenAIRE

    Tuomivirta, Olga

    2009-01-01

    The study is done as a part of a bachelor’s study in Marketing at Laurea University of Applied Sciences. Marketing as a science appeared more than 50 years ago and is still developing. The purpose of the thesis work is to collect knowledge via marketing research, to understand how marketing is implemented by the case company–provider and compare the result to professional services marketing theory. Marketing professional services is difficult because services differ from goods. Marketing ...

  7. Design, Qualification and Integration Testing of the High-Temperature Resistance Temperature Device for Stirling Power System

    Science.gov (United States)

    Chan, Jack; Hill, Dennis H.; Elisii, Remo; White, Jonathan R.; Lewandowski, Edward J.; Oriti, Salvatore M.

    2015-01-01

    The Advanced Stirling Radioisotope Generator (ASRG), developed from 2006 to 2013 under the joint sponsorship of the United States Department of Energy (DOE) and National Aeronautics and Space Administration (NASA) to provide a high-efficiency power system for future deep space missions, employed Sunpower Incorporated's Advanced Stirling Convertors (ASCs) with operating temperature up to 840 C. High-temperature operation was made possible by advanced heater head materials developed to increase reliability and thermal-to-mechanical conversion efficiency. During a mission, it is desirable to monitor the Stirling hot-end temperature as a measure of convertor health status and assist in making appropriate operating parameter adjustments to maintain the desired hot-end temperature as the radioisotope fuel decays. To facilitate these operations, a Resistance Temperature Device (RTD) that is capable of high-temperature, continuous long-life service was designed, developed and qualified for use in the ASRG. A thermal bridge was also implemented to reduce the RTD temperature exposure while still allowing an accurate projection of the ASC hot-end temperature. NASA integrated two flight-design RTDs on the ASCs and assembled into the high-fidelity Engineering Unit, the ASRG EU2, at Glenn Research Center (GRC) for extended operation and system characterization. This paper presents the design implementation and qualification of the RTD, and its performance characteristics and calibration in the ASRG EU2 testing.

  8. Power Service Shops

    Data.gov (United States)

    Federal Laboratory Consortium — TVA's Power Service Shops provides expert repair and maintenance of power system components and large industrial equipment. With world-class maintenance facilities...

  9. Learning Space Service Design

    Directory of Open Access Journals (Sweden)

    Elliot Felix

    2011-12-01

    Full Text Available Much progress has been made in creating informal learning spaces that incorporate technology and flexibly support a variety of activities. This progress has been principally in designing the right combination of furniture, technology, and space. However, colleges and universities do not design services within learning spaces with nearly the same level of sophistication or integration. Nor do they adequately assess their services. This paper calls for a focus on designing services to facilitate better learning experiences. It describes the fundamentals of service design practice, a selection of exemplary spaces, and the implications for design, budgeting, and staffing.

  10. Smart Location Database - Service

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Smart Location Database (SLD) summarizes over 80 demographic, built environment, transit service, and destination accessibility attributes for every census block...

  11. User Initiated Services

    Data.gov (United States)

    National Aeronautics and Space Administration — Traditional mission operations and space communications services rely on highly scripted activities, often planned weeks in advance, limiting responsiveness to...

  12. Disruption - Access cards service

    CERN Multimedia

    2014-01-01

    We would like to inform you that between 10 November and 15 December 2014, the access cards service in Building 55 will be disrupted, as the GS Department has decided to improve the facilities for users of this building. During the work, you will find the registration, biometric registration and dosimeter exchange services on the second floor of Building 55 and the vehicle sticker service on the ground floor along with the access cards service. We thank you for your understanding and apologise for any inconvenience caused.

  13. CVP Service Area

    Data.gov (United States)

    California Natural Resource Agency — Federal Water Contract Service Area boundaries are incorporated boundaries of districts having contracts with the U.S. Bureau of Reclamation (Reclamation), within...

  14. Geospatial Services Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: To process, store, and disseminate geospatial data to the Department of Defense and other Federal agencies.DESCRIPTION: The Geospatial Services Laboratory...

  15. Trade in health services.

    Science.gov (United States)

    Chanda, Rupa

    2002-01-01

    In light of the increasing globalization of the health sector, this article examines ways in which health services can be traded, using the mode-wise characterization of trade defined in the General Agreement on Trade in Services. The trade modes include cross- border delivery of health services via physical and electronic means, and cross-border movement of consumers, professionals, and capital. An examination of the positive and negative implications of trade in health services for equity, efficiency, quality, and access to health care indicates that health services trade has brought mixed benefits and that there is a clear role for policy measures to mitigate the adverse consequences and facilitate the gains. Some policy measures and priority areas for action are outlined, including steps to address the "brain drain"; increasing investment in the health sector and prioritizing this investment better; and promoting linkages between private and public health care services to ensure equity. Data collection, measures, and studies on health services trade all need to be improved, to assess better the magnitude and potential implications of this trade. In this context, the potential costs and benefits of trade in health services are shaped by the underlying structural conditions and existing regulatory, policy, and infrastructure in the health sector. Thus, appropriate policies and safeguard measures are required to take advantage of globalization in health services. PMID:11953795

  16. Facility Registry Service (FRS)

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Facility Registry Service (FRS) provides an integrated source of comprehensive (air, water, and waste) environmental information about facilities across EPA,...

  17. Psychotherapy services outside the National Health Service *

    Science.gov (United States)

    Kroll, Una

    1976-01-01

    With the help of an Upjohn Travelling Fellowship, I visited 15 units providing services for people under stress. There were nine residential units and six non-residential units, all were Christian charitable organisations and in all there was close co-operation with the medical profession. All these organisations accept referrals from general practitioners and deserve to be more widely known. PMID:1255548

  18. Psychotherapy services outside the National Health Service.

    Science.gov (United States)

    Kroll, U

    1976-02-01

    With the help of an Upjohn Travelling Fellowship, I visited 15 units providing services for people under stress. There were nine residential units and six non-residential units, all were Christian charitable organisations and in all there was close co-operation with the medical profession.All these organisations accept referrals from general practitioners and deserve to be more widely known.

  19. The dilemma of service productivity and service innovation : An empirical exploration in financial services

    NARCIS (Netherlands)

    Aspara, Jaakko; Klein, Jan; Luo, Xueming; Tikkanen, Henrikki

    2017-01-01

    We conduct a systematic exploratory investigation of the effects of firms’ existing service productivity on the success of their new service innovations. Although previous research extensively addresses service productivity and service innovation, respectively, this is the first empirical study that

  20. Tango archiving service status

    International Nuclear Information System (INIS)

    Abeille, G.; Pierre-Joseph, S.; Guyot, J.; Ounsy, M.; Rubio, S.; Strangolino, G.; Passuello, R.

    2012-01-01

    In modern scientific instruments like ALBA, ELLETRA or Synchrotron Soleil, the monitoring and tuning of thousands of parameters is essential to drive high-performing accelerators and beamlines. To keep track of these parameters and to easily manage large volumes of technical data, an archiving service is a key component of a modern control system like Tango. To achieve this, a high-available archiving service is provided as a feature of the Tango control system. This archiving service stores data coming from the Tango control system into MySQL or Oracle databases. Tree sub-services are provided: 1) An historical service with an archiving period up to 10 seconds; 2) A short term service providing a few weeks retention with a period up to 100 milliseconds; and 3) A snapshot service which takes 'snapshots' of Tango parameters and can reapply them to the control system on user demand. This paper presents how to obtain a high-performance and scalable service based on our feedback after several years of operation. The deployment architecture in the different Tango institutes will then be detailed. The paper concludes with a description of the next steps and incoming features which will be available in the next future. (authors)

  1. New customer services

    DEFF Research Database (Denmark)

    Münster, Marie; Møller Andersen, Frits; Meza, Maria Josefina Figueroa

    2011-01-01

    This chapter focuses on the challenge of motivating energy service customers to make best use of available smart technologies. This can be done through economic incentives, but also through information and education, regulation and reorganisation, and by improving services or customer comfort...

  2. Analyzing Web Service Contracts

    DEFF Research Database (Denmark)

    Cambronero, M.-Emilia; Okika, Joseph C.; Ravn, Anders Peter

    2007-01-01

    Web services should be dependable, because businesses rely on them. For that purpose the Service Oriented Architecture has standardized specifications at a syntactical level. In this paper, we demonstrate how such specifications are used to derive semantic models in the form of (timed) automata...

  3. Information Services Directory

    International Nuclear Information System (INIS)

    1986-08-01

    The Information Services Directory is intended to facilitate participation by states, affected Indian tribes and the public in the Civilian Radioactive Waste Management Program. The Directory is produced by the Information Services Division of the OCRWM's Office of Policy and Outreach and will be updated periodically. It is a reference document that identifies the sources of available program information

  4. Health Care Services

    Science.gov (United States)

    Misuse and Addiction Prevention Finance & Management Services Health Care Services Juvenile Justice , 2017 Warning - A phone number that was once used for the Denali KidCare program is now being used to ask people for their credit card number in order to win a prize. The phone number related to this

  5. Marketing Reference Services.

    Science.gov (United States)

    Norman, O. Gene

    1995-01-01

    Relates the marketing concept to library reference services. Highlights include a review of the literature and an overview of marketing, including research, the marketing mix, strategic plan, marketing plan, and marketing audit. Marketing principles are applied to reference services through the marketing mix elements of product, price, place, and…

  6. Information Services Directory

    International Nuclear Information System (INIS)

    1985-11-01

    The Information Services directory is intended to facilitate participation by states, affected Indian tribes and the public in the Civilian Radioactive Waste Management program. The Directory is produced by the Information Services Division of the OCRWM's Office of Policy and Outreach and will be updated periodically. It is a reference document that identifies the sources of available program information

  7. Hospitality Services Reference Book.

    Science.gov (United States)

    Texas Tech Univ., Lubbock. Home Economics Curriculum Center.

    This reference book provides information needed by employees in hospitality services occupations. It includes 29 chapters that cover the following topics: the hospitality services industry; professional ethics; organization and management structures; safety practices and emergency procedures; technology; property maintenance and repair; purchasing…

  8. Appropriability, services and reputation

    NARCIS (Netherlands)

    Dolfsma, W.A.

    2011-01-01

    The appropriability regime (Teece 1986) that innovating service firms face is generally weaker than what firms in manufacturing sectors face. An important means to appropriate benefits from innovation that service firms can use is their reputation. This conceptual paper offers insights into how a

  9. Inclusive Services Innovation Configuration

    Science.gov (United States)

    Holdheide, Lynn R.; Reschly, Daniel J.

    2011-01-01

    Teacher preparation to deliver inclusive services to students with disabilities is increasingly important because of changes in law and policy emphasizing student access to, and achievement in, the general education curriculum. This innovation configuration identifies the components of inclusive services that should be incorporated in teacher…

  10. Start with Service

    Science.gov (United States)

    Riordan, Emily

    2013-01-01

    Community service has become a key part of the high school experience, with students eager to set themselves apart from one another on the path to college or to find opportunities to discover and develop new passions, creativity, and leadership skills. The author discusses The Green Apple Day of Service, an annual event that brings volunteers from…

  11. Food Service Management

    Science.gov (United States)

    Rappole, C. L.; Louvier, S. A.

    1985-01-01

    A study to design a food service system using current technology to serve a small scale Space Station was conducted. The psychological, sociological and nutritional factors affecting feeding in microgravity conditions was investigated. The logistics of the food service system was defined.

  12. The Service Station.

    Science.gov (United States)

    Ohio State Univ., Columbus. Center for Vocational and Technical Education.

    The purpose of the teacher's guide is to encourage the primary student to expand his or her awareness of jobs within the community. The role of the service station worker is examined, with emphasis on the goods and services provided. Subject areas for which the materials in this guide have potential are social studies, art, and language. Each set…

  13. Coproduction of healthcare service.

    Science.gov (United States)

    Batalden, Maren; Batalden, Paul; Margolis, Peter; Seid, Michael; Armstrong, Gail; Opipari-Arrigan, Lisa; Hartung, Hans

    2016-07-01

    Efforts to ensure effective participation of patients in healthcare are called by many names-patient centredness, patient engagement, patient experience. Improvement initiatives in this domain often resemble the efforts of manufacturers to engage consumers in designing and marketing products. Services, however, are fundamentally different than products; unlike goods, services are always 'coproduced'. Failure to recognise this unique character of a service and its implications may limit our success in partnering with patients to improve health care. We trace a partial history of the coproduction concept, present a model of healthcare service coproduction and explore its application as a design principle in three healthcare service delivery innovations. We use the principle to examine the roles, relationships and aims of this interdependent work. We explore the principle's implications and challenges for health professional development, for service delivery system design and for understanding and measuring benefit in healthcare services. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  14. Virtual Libraries: Service Realities.

    Science.gov (United States)

    Novak, Jan

    2002-01-01

    Discussion of changes in society that have resulted from information and communication technologies focuses on changes in libraries and a new market for library services with new styles of clients. Highlights client service issues to be considered when transitioning to a virtual library situation. (Author/LRW)

  15. The Call to Service

    Science.gov (United States)

    Gray, B. Allison

    2009-01-01

    On January 19, 2009, the day before his historic inauguration, President Obama and his wife, Michelle, commemorated Martin Luther King Day by volunteering for various community service projects around the Washington, DC, area. A record number of Americans also participated in the King Day of Service, joining in over 13,000 projects, more than…

  16. Radioactive Sources Service

    CERN Document Server

    2007-01-01

    Please note that the radioactive sources service will be open by appointment only every Monday, Wednesday and Friday during CERN working hours (instead of alternate weeks). In addition, please note that our 2007 schedule is available on our web site: http://cern.ch/service-rp-sources

  17. Laboratories: Integrating Services

    Centers for Disease Control (CDC) Podcasts

    2011-04-04

    This podcast highlights the importance of integrating laboratory services to maximize service delivery to patients.  Created: 4/4/2011 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention (NCHHSTP).   Date Released: 4/7/2011.

  18. At your service!

    CERN Multimedia

    Laëtitia Pedroso

    2011-01-01

    Everyone, at some time or another, has needed to get a new key cut, or to have an office painted or to get their hands on a document without knowing who to ask. People who have been at CERN for many years obviously don't experience this very often, but picking their way through the Laboratory's many services can be a real challenge for users and new arrivals. The Service Desk is now there to help !   The service desk team in Building 55. The new Service Desk is a one-stop shop for information on CERN. Physically located in Building 55 it has a single telephone number (77777) and a web portal (the CERN service portal) that can be accessed 24/7, providing all the answers to your logistical questions. The IT and GS Departments have been collaborating on this project for nearly a year and a half. Today, all the services offered by the GS and IT Departments are listed in the CERN service portal. "The CERN service portal is simple to use and works just like a key-word search engine. A list of r...

  19. Product Service Systems

    DEFF Research Database (Denmark)

    Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems......Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems...

  20. Over-servicing

    African Journals Online (AJOL)

    The definition of 'over-servicing' in the Guidelines can assist in defining a meaning for ... As South Africa (SA) has no ethical guidelines for practitioners defining ... principle applies to referrals to another healthcare practitioner for a service or a procedure ... 'Underservicing' generally means failing to provide a patient with.

  1. Logistics Services Communication

    CERN Multimedia

    2006-01-01

    Members of the personnel are invited to take note that only parcels corresponding to official orders or contracts will be handled at CERN. Individuals are not authorisedto have private merchandise delivered to them at CERN and private deliveries will not be accepted by the Goods Reception services. Thank you for your understanding. Logistics Services - FI Department - 79947

  2. Logistics Services Communication

    CERN Document Server

    2006-01-01

    Members of the personnel are invited to take note that only parcels corresponding to official orders or contracts will be handled at CERN. Individuals are not authorised to have private merchandise delivered to them at CERN and private deliveries will not be accepted by the Goods Reception services. Thank you for your understanding. Logistics Services - FI Department - 79947

  3. Managing customer service.

    Science.gov (United States)

    Paget, Zoe

    2015-02-28

    Zoe Paget is the customer services manager at YourVets. Her role includes managing the company's call centre, social media marketing, working with the marketing department to develop customer care initiatives and reporting service levels to the company's directors. British Veterinary Association.

  4. Mass Customization Services

    DEFF Research Database (Denmark)

    Friedrich, Gerhard

    Topics of the IMCM’08 & PETO’08 and this book are: Mass customization in service, mass customizing financial services, mass customization in supply networks, implementation issues in logistics, product life cycle and mass customization. The research field of mass customization is more than 15 years...

  5. [Marketing in health service].

    Science.gov (United States)

    Ameri, Cinzia; Fiorini, Fulvio

    2014-01-01

    The gradual emergence of marketing activities in public health demonstrates an increased interest in this discipline, despite the lack of an adequate and universally recognized theoretical model. For a correct approach to marketing techniques, it is opportune to start from the health service, meant as a service rendered. This leads to the need to analyse the salient features of the services. The former is the intangibility, or rather the ex ante difficulty of making the patient understand the true nature of the performance carried out by the health care worker. Another characteristic of all the services is the extreme importance of the regulator, which means who performs the service (in our case, the health care professional). Indeed the operator is of crucial importance in health care: being one of the key issues, he becomes a part of the service itself. Each service is different because the people who deliver it are different, furthermore there are many variables that can affect the performance. Hence it arises the difficulty in measuring the services quality as well as in establishing reference standards.

  6. REMINDER FROM MEDICAL SERVICE

    CERN Multimedia

    Service Médical

    2000-01-01

    For medical problems, we would like to remind all personnel working on the CERN sites, be they staff or from outside firms, that they are welcome at the Infirmary, building 57, ground floor.For information, call the Nurses- on Telephone73802- by electronic mailInfirmary.Service@cern.chMarion.Diedrich@cern.chJanet.Doody@cern.chMireille.Vosdey@cern.chMedical Service

  7. Advanced Service Offshore Outsourcing

    DEFF Research Database (Denmark)

    Brandl, Kristin; Jensen, Peter D. Ørberg; Lind, Manya Jaura

    2018-01-01

    the capabilities, where the deficient development of one capability can be mitigated by the development of another capability (firm-internal determinants). Grounded in organization and service production theory, the paper contributes to the thematic literature on service offshoring and literature on organizational...

  8. Orkestre er public service

    DEFF Research Database (Denmark)

    Fjeldsøe, Michael

    2017-01-01

    kommentar til debatten om danske symfoniorkestre - kritik af Informations manglende forståelse af europæiske radiofoniers orkestres rolle som public service......kommentar til debatten om danske symfoniorkestre - kritik af Informations manglende forståelse af europæiske radiofoniers orkestres rolle som public service...

  9. Senior and Disabilities Services

    Science.gov (United States)

    State Employees Division of Senior and Disabilities Services DHSS State of Alaska Home Divisions and ; Assistance Senior Benefits Program Medicare Substance Abuse Treatment Alaska Tribal Child Welfare Compact ; Senior and Disabilities Services Page Content Director Duane Mayes photo image. Duane Mayes Director

  10. Formation of Service Ecosystems

    DEFF Research Database (Denmark)

    Jonas, Julia M.; Sörhammar, David; Satzger, Gerhard

    – i.e. the “birth phase” (Moore, 2009) of a service ecosystem. This paper, therefore, aims to explore how the somewhat “magic” processes of service ecosystem formation that are being taken for granted actually occur. Methodology/Approach: Building on a review of core elements in the definitions...... for Harvard students) or value proposition (share messages, photos, videos, etc. with friends). Processes of configuring actors, resources, and value propositions are influenced by the structural embeddedness of the service ecosystem (e.g., regional infrastructure, existing networks of actors, or resource...... availability) as well as guided by the actors’ own and shared institutions (e.g., rules, norms,and beliefs).We contextualize each starting point with illustrative cases and analyze the service ecosystem configuration process: “Axoon/Trumpf” (initiated by resources), “JOSEPHS – the service manufactory...

  11. DIRAC distributed computing services

    International Nuclear Information System (INIS)

    Tsaregorodtsev, A

    2014-01-01

    DIRAC Project provides a general-purpose framework for building distributed computing systems. It is used now in several HEP and astrophysics experiments as well as for user communities in other scientific domains. There is a large interest from smaller user communities to have a simple tool like DIRAC for accessing grid and other types of distributed computing resources. However, small experiments cannot afford to install and maintain dedicated services. Therefore, several grid infrastructure projects are providing DIRAC services for their respective user communities. These services are used for user tutorials as well as to help porting the applications to the grid for a practical day-to-day work. The services are giving access typically to several grid infrastructures as well as to standalone computing clusters accessible by the target user communities. In the paper we will present the experience of running DIRAC services provided by the France-Grilles NGI and other national grid infrastructure projects.

  12. A Web service substitution method based on service cluster nets

    Science.gov (United States)

    Du, YuYue; Gai, JunJing; Zhou, MengChu

    2017-11-01

    Service substitution is an important research topic in the fields of Web services and service-oriented computing. This work presents a novel method to analyse and substitute Web services. A new concept, called a Service Cluster Net Unit, is proposed based on Web service clusters. A service cluster is converted into a Service Cluster Net Unit. Then it is used to analyse whether the services in the cluster can satisfy some service requests. Meanwhile, the substitution methods of an atomic service and a composite service are proposed. The correctness of the proposed method is proved, and the effectiveness is shown and compared with the state-of-the-art method via an experiment. It can be readily applied to e-commerce service substitution to meet the business automation needs.

  13. Conceptualizing smart service systems

    DEFF Research Database (Denmark)

    Beverungen, Daniel; Müller, Oliver; Matzner, Martin

    2017-01-01

    Recent years have seen the emergence of physical products that are digitally networked with other products and with information systems to enable complex business scenarios in manufacturing, mobility, or healthcare. These “smart products”, which enable the co-creation of “smart service” that is b......Recent years have seen the emergence of physical products that are digitally networked with other products and with information systems to enable complex business scenarios in manufacturing, mobility, or healthcare. These “smart products”, which enable the co-creation of “smart service......” that is based on monitoring, optimization, remote control, and autonomous adaptation of products, profoundly transform service systems into what we call “smart service systems”. In a multi-method study that includes conceptual research and qualitative data from in-depth interviews, we conceptualize “smart...... service” and “smart service systems” based on using smart products as boundary objects that integrate service consumers’ and service providers’ resources and activities. Smart products allow both actors to retrieve and to analyze aggregated field evidence and to adapt service systems based on contextual...

  14. The new Service Desk

    CERN Multimedia

    2011-01-01

    The Service Desk as single point of contact will replace the IT Help Desk and the SEM Support Help Desk as of the 15 February. In a joint effort to improve the services provided by IT and GS Departments, the following changes will be introduced as of the 15 February: One phone number to remember: 77777;   You will be provided access to a Service Portal from the CERN Home page under the heading “Services”. This Service Portal allows ‘google like’ searching as well as the creation of service requests (such as: painting) and incident tickets (such as: printing);   A service counter will welcome you on the 2nd floor of Building 55 and help you between 7h30 and 18h30 during CERN working days;   Emails to computing.helpdesk@cern.ch, sem.support@cern.ch or to similar ‘support-line’ email addresses will be handled as before. Below the surface a lot is changing (new tool including a service portal, ne...

  15. 75 FR 33740 - Indoor Tanning Services; Cosmetic Services; Excise Taxes

    Science.gov (United States)

    2010-06-15

    ... 1545-BJ40 Indoor Tanning Services; Cosmetic Services; Excise Taxes AGENCY: Internal Revenue Service.... 7805. * * * Par. 5. Section 49.0-3 is added to read as follows: Sec. 49.0-3 Introduction; cosmetic...--Cosmetic Services Sec. 49.5000B-1 Indoor tanning services. [The text of this proposed Sec. 49.5000B-1 is...

  16. Medical Service Information

    CERN Multimedia

    GS Department

    2010-01-01

    The Medical Service is pleased to inform you that a psychologist specialising in psychotherapy (member of the Swiss Federation of Psychologists- FSP), Mrs Sigrid Malandain, will be starting work at the CERN on 1 November 2010, in the premises of the Medical Service, Building 57-1-024. Members of CERN personnel can request individual consultations, by appointment, in French or in English, on Tuesdays and Thursdays by calling 78435 (Medical Service secretariat) or sending an e-mail to psychologist-me@cern.ch.

  17. ACB Service Final Closure

    CERN Multimedia

    IT Department

    2004-01-01

    As previously announced in CERN weekly Bulletin 18/2004 of 26 April 2004, and following a discussion at the Desktop Forum on 28 October, the Automatic Call Back (ACB) service will be definitely closed on Friday 10 December 2004. If the ACB phone number is dialed after that date over plain telephone or ISDN, the call will remain unanswered. Therefore, the remaining ACB users are encouraged to switch as soon as possible to ISPs (Internet Service Providers) which provide equivalent or better service. Some suggestions on how to make alternative arrangements have been made available on the Remote Access web site. IT Department

  18. ACB Service Final Closure

    CERN Multimedia

    IT Department

    2004-01-01

    As previously announced in CERN weekly Bulletin 18/2004 of 26th April 2004, and following a discussion at the Desktop Forum on 28th October, the Automatic Call Back (ACB) service will be definitely closed on Friday 10th December 2004. If the ACB phone number is dialed after that date over plain telephone or ISDN, the call will remain unanswered. Therefore, the remaining ACB users are encouraged to switch as soon as possible to ISPs (Internet Service Providers) which provide equivalent or better service. Some suggestions on how to make alternative arrangements have been made available on the Remote Access web site: http://www.cern.ch/ras IT Department

  19. Women in service uniforms

    Directory of Open Access Journals (Sweden)

    Hanna Karaszewska

    2012-12-01

    Full Text Available The article discusses the problems of women who work in the uniformed services with the particular emphasis on the performing of the occupation of the prison service. It presents the legal issues relating to equal treatment of men and women in the workplace, formal factors influencing their employment, the status of women in prison, and the problems of their conducting in the professional role. The article also presents the results of research conducted in Poland and all over the world, on the functioning of women in prison and their relations with officers of the Prison Service, as well as with inmates.

  20. Programming NET Web Services

    CERN Document Server

    Ferrara, Alex

    2007-01-01

    Web services are poised to become a key technology for a wide range of Internet-enabled applications, spanning everything from straight B2B systems to mobile devices and proprietary in-house software. While there are several tools and platforms that can be used for building web services, developers are finding a powerful tool in Microsoft's .NET Framework and Visual Studio .NET. Designed from scratch to support the development of web services, the .NET Framework simplifies the process--programmers find that tasks that took an hour using the SOAP Toolkit take just minutes. Programming .NET

  1. Ecosystem services in ECOCLIM

    DEFF Research Database (Denmark)

    Sørensen, Lise Lotte; Boegh, Eva; Bendtsen, J

    that actions initiated to reduce anthropogenic GHG emissions are sustainable and not destructive to existing ecosystem services. Therefore it is important to address i.e. land use change in relation to the regulating services of the ecosystems, such as carbon sequestration and climate regulation. At present...... a thorough understanding of the ecosystem processes controlling the uptake or emissions of GHG is fundamental. Here we present ECOCLIM in the context of ecosystem services and the experimental studies within ECOCLIM which will lead to an enhanced understanding of Danish ecosystems....

  2. Morocco - Financial Services

    Data.gov (United States)

    Millennium Challenge Corporation — The final evaluation of the Financial Services Project (FSP), undertaken by North South Consultants Exchange (NSCE), was undertaken from 17 April to end of September...

  3. JALFHCC - Patient Registration Service

    Data.gov (United States)

    Department of Veterans Affairs — The Captain James A. Lovell Federal Health Care Center (JALFHCC) Patient Registration Service supports the operation of the first VA/Navy Federal Health Care Center...

  4. ParticipantService

    Data.gov (United States)

    Department of Veterans Affairs — Given a VeteranÆs File Number or Social Security Number the service will return information about the other people and organizations related to the Veteran (family...

  5. Hospital Service Area File

    Data.gov (United States)

    U.S. Department of Health & Human Services — This file is derived from the calendar year inpatient claims data. The records contain number of discharges, length of stay, and total charges summarized by provider...

  6. Rehabilitation and Prosthetic Services

    Science.gov (United States)

    ... Review Resources AT Education Blind Rehab Chiropractic Service Polytrauma/TBI Prosthetics & Sensory Aids Recreation Therapy More Health ... Military Sexual Trauma PTSD Research (MIRECC) Military Exposures Polytrauma Rehabilitation Spinal Cord Injury Telehealth Womens Health Issues ...

  7. Marketing School Food Services.

    Science.gov (United States)

    Wood, Wilma

    1990-01-01

    Marketing the food service program in an Ohio district is directed toward the students and also at the community, school administrators, teachers, and employees. Students are encouraged to follow a healthier way of eating. (MLF)

  8. VnpPersonService

    Data.gov (United States)

    Department of Veterans Affairs — Common Web Service for VONAPP. Retrieves, creates, updates and deletes a veteranÆs VNP_PERSON record in the Corporate database for a claim selected in the GUI by the...

  9. Geological Services Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — Researchers use computed tomography (CT) scanners at NETL’s Geological Services Laboratory in Morgantown, WV, to peer into geologic core samples to determine how...

  10. Data Element Registry Services

    Data.gov (United States)

    U.S. Environmental Protection Agency — Data Element Registry Services (DERS) is a resource for information about value lists (aka code sets / pick lists), data dictionaries, data elements, and EPA data...

  11. Financial Services Industry

    National Research Council Canada - National Science Library

    Arezo, Gullab; Billingslea, Willie D; Brooks, James V; Brown, Jeffery D; Cotton, Cheryl; Determan, Deborah A; Dzurenko, Monte S; Egentowich, John; Greenwald, Michael N; Keegan, Matthew

    2006-01-01

    .... The financial services industry impacts the daily lives of all Americans. They rely on it to save for their retirement and their children's education, pay their bills, insure against risks, and buy their homes and automobiles...

  12. Airport Status Web Service

    Data.gov (United States)

    Department of Transportation — A web service that allows end-users the ability to query the current known delays in the National Airspace System as well as the current weather from NOAA by airport...

  13. Facility Focus: Food Service.

    Science.gov (United States)

    College Planning & Management, 2002

    2002-01-01

    Describes the Hawthorn Court Community Center at Iowa State University, Ames, and the HUB-Robeson Center at Pennsylvania State University. Focuses on the food service offered in these new student-life buildings. Includes photographs. (EV)

  14. Mapping cultural ecosystem services:

    DEFF Research Database (Denmark)

    Paracchini, Maria Luisa; Zulian, Grazia; Kopperoinen, Leena

    2014-01-01

    Research on ecosystem services mapping and valuing has increased significantly in recent years. However, compared to provisioning and regulating services, cultural ecosystem services have not yet been fully integrated into operational frameworks. One reason for this is that transdisciplinarity...... surveys are a main source of information. Among cultural ecosystem services, assessment of outdoor recreation can be based on a large pool of literature developed mostly in social and medical science, and landscape and ecology studies. This paper presents a methodology to include recreation...... in the conceptual framework for EU wide ecosystem assessments (Maes et al., 2013), which couples existing approaches for recreation management at country level with behavioural data derived from surveys, and population distribution data. The proposed framework is based on three components: the ecosystem function...

  15. Agricultural Research Service

    Science.gov (United States)

    ... Menu United States Department of Agriculture Agricultural Research Service Research Research Home National Programs Research Projects Scientific Manuscripts International Programs Scientific Software/Models Databases and Datasets Office of Scientific Quality ...

  16. Voluntary Service System (VSS)

    Data.gov (United States)

    Department of Veterans Affairs — Voluntary Service System (VSS) is a national-level application which replaced the site-based Voluntary Timekeeping System (VTK). VTK was used for many years at the...

  17. Provider of Services File

    Data.gov (United States)

    U.S. Department of Health & Human Services — The POS file contains data on characteristics of hospitals and other types of healthcare facilities, including the name and address of the facility and the type of...

  18. BioServices

    DEFF Research Database (Denmark)

    Cokelaer, Thomas; Pultz, Dennis; Harder, Lea M

    2013-01-01

    Web interfaces provide access to numerous biological databases. Many can be accessed to in a programmatic way thanks to Web Services. Building applications that combine several of them would benefit from a single framework....

  19. Rethinking Lean Service

    Science.gov (United States)

    Seddon, John; O'Donovan, Brendan; Zokaei, Keivan

    Ever since Levitt's influential Harvard Business Review article 'Production-Line Approach to Service' was published in 1972, it has been common for services to be treated like production lines in both the academic literature and more widely in management practice. The belief that achieving economies of scale will reduce unit costs is a common feature of management decision-making. As technological advancement has produced ever more sophisticated IT and telephony, it has become increasingly easier for firms to standardise and off-shore services. The development of the 'lean' literature has only helped to emphasise the same underlying management assumptions: by managing cost and workers' activity, organisational performance is expected to improve. This chapter argues that through misinterpretation of the core paradigm 'lean' has become subsumed into the 'business as usual' of conventional service management. As a result, 'lean' has become synonymous with 'process efficiency' and the opportunity for significant performance improvement - as exemplified by Toyota - has been missed.

  20. Transportation Services Index

    Data.gov (United States)

    Department of Transportation — The TSI is a monthly measure of the volume of services performed by the for-hire transportation sector. The index covers the activities of for-hire freight carriers,...

  1. Home Care Services

    Science.gov (United States)

    Home care is care that allows a person with special needs stay in their home. It might be for people who are getting ... are chronically ill, recovering from surgery, or disabled. Home care services include Personal care, such as help ...

  2. Complex Deployed Responsive Service

    Science.gov (United States)

    Parry, Glenn; McLening, Marc; Caldwell, Nigel; Thompson, Rob

    A pizza restaurant must provide product, in the form of the food and drink, and service in the way this is delivered to the customer. Providing this has distinct operational challenges, but what if the restaurant also provides a home delivery service? The service becomes deployed as the customer is no-longer co-located with the production area. The business challenge is complicated as service needs to be delivered within a geographic region, to time or the pizza will be cold, and within a cost that is not ­prohibitive. It must also be responsive to short term demand; needing to balance the number of staff it has available to undertake deliveries against a forecast of demand.

  3. Distributed Web Service Repository

    Directory of Open Access Journals (Sweden)

    Piotr Nawrocki

    2015-01-01

    Full Text Available The increasing availability and popularity of computer systems has resulted in a demand for new, language- and platform-independent ways of data exchange. That demand has in turn led to a significant growth in the importance of systems based on Web services. Alongside the growing number of systems accessible via Web services came the need for specialized data repositories that could offer effective means of searching of available services. The development of mobile systems and wireless data transmission technologies has allowed the use of distributed devices and computer systems on a greater scale. The accelerating growth of distributed systems might be a good reason to consider the development of distributed Web service repositories with built-in mechanisms for data migration and synchronization.

  4. A customer service journey.

    Science.gov (United States)

    VanDecandelaere, Traci

    2012-01-01

    Converting security team members from simple rule enforcers to superior customer service providers required changes in leadership attitudes, rules, training, and other security traditions, but it has paid off in staff performance and recognition, according to the author.

  5. Financial Investment Services Regulation

    Directory of Open Access Journals (Sweden)

    Gabriela Anghelache

    2006-02-01

    Afterwards, the focus is set on the transparency and integrity of the operations. Another aspect is about the free circulation of services and about the role of the clearing fund, being distinguished all the sensitive elements this fund raises.

  6. 75 FR 22689 - Fiscal Service

    Science.gov (United States)

    2010-04-29

    ... the U.S. Department of the Treasury, Financial Management Service, Financial Accounting and Services..., 2010. Sandra Paylor-Sanders, Acting Director, Financial Accounting and Services Division. [FR Doc. 2010... Bonding Company AGENCY: Financial Management Service, Fiscal Service, Department of the Treasury. ACTION...

  7. 77 FR 32178 - Fiscal Service

    Science.gov (United States)

    2012-05-31

    ... of the Treasury, Financial Management Service, Financial Accounting and Services Division, Surety... Carrico, Director, Financial Accounting and Services Division. [FR Doc. 2012-13044 Filed 5-30-12; 8:45 am...: Alterra Reinsurance USA, Inc. AGENCY: Financial Management Service, Fiscal Service, Department of the...

  8. Forensic mental health services: Current service provision and ...

    African Journals Online (AJOL)

    Forensic mental health services: Current service provision and planning for a prison mental health service in the Eastern Cape. Kiran Sukeri, Orlando A. Betancourt, Robin Emsley, Mohammed Nagdee, Helmut Erlacher ...

  9. FRAMATOME nuclear services

    International Nuclear Information System (INIS)

    Delorme, H.; Buttin, J.

    1985-05-01

    FRAMATOME is a French company whose main activities since 1958 have been the design and manufacture of standardized PWR Nuclear Steam Supply Systems. FRAMATOME builds the Reactor Coolant System components and installs and starts-up the extended Nuclear Steam Supply Systems. In addition to the supply of spare parts of tooling, the services offered by Framatome are implementation of backfits aimed at performance and safety improvement and equipment reliability, technical assistance and, maintenance and repair services

  10. Women in service uniforms

    OpenAIRE

    Hanna Karaszewska; Maciej Muskała

    2012-01-01

    The article discusses the problems of women who work in the uniformed services with the particular emphasis on the performing of the occupation of the prison service. It presents the legal issues relating to equal treatment of men and women in the workplace, formal factors influencing their employment, the status of women in prison, and the problems of their conducting in the professional role. The article also presents the results of research conducted in Poland and all over the world, on th...

  11. Guide to legal services

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This is a directory of law firms that provide services to the independent energy industry. The directory lists the firm's name, address, telephone and FAX numbers, and the name of a contact person. Included is a description of the specialties or services offered by the firm in the area of independent energy projects; some of these include regulatory, tax, fuel supply, operations and maintenance, environmental, real estate, government contracts and bankruptcy

  12. Calgary Laboratory Services

    Directory of Open Access Journals (Sweden)

    James R. Wright MD, PhD

    2015-12-01

    Full Text Available Calgary Laboratory Services provides global hospital and community laboratory services for Calgary and surrounding areas (population 1.4 million and global academic support for the University of Calgary Cumming School of Medicine. It developed rapidly after the Alberta Provincial Government implemented an austerity program to address rising health care costs and to address Alberta’s debt and deficit in 1994. Over roughly the next year, all hospital and community laboratory test funding within the province was put into a single budget, fee codes for fee-for-service test billing were closed, roughly 40% of the provincial laboratory budget was cut, and roughly 40% of the pathologists left the province of Alberta. In Calgary, in the face of these abrupt changes in the laboratory environment, private laboratories, publicly funded hospital laboratories and the medical school department precipitously and reluctantly merged in 1996. The origin of Calgary Laboratory Services was likened to an “unhappy shotgun marriage” by all parties. Although such a structure could save money by eliminating duplicated services and excess capacity and could provide excellent city-wide clinical service by increasing standardization, it was less clear whether it could provide strong academic support for a medical school. Over the past decade, iterations of the Calgary Laboratory Services model have been implemented or are being considered in other Canadian jurisdictions. This case study analyzes the evolution of Calgary Laboratory Services, provides a metric-based review of academic performance over time, and demonstrates that this model, essentially arising as an unplanned experiment, has merit within a Canadian health care context.

  13. Financing Public Service Broadcasting

    DEFF Research Database (Denmark)

    Berg, Christian Edelvold; Lund, Anker Brink

    2012-01-01

    Broadcasting (PSB) financing regimes in Europe, concluding that Denmark, Finland, Iceland, Norway, and Sweden may still be considered conventional, licence fee PSB countries, but with some interesting differences in relation to competitive and market oriented alternatives of resource provision......Recently several European countries have abolished the traditional public service licence fee system, replacing it with direct public funding. But except for Iceland, the Nordic countries have not followed suit. The article discusses this development within a comparative framework of Public Service...

  14. Programming WCF Services

    CERN Document Server

    Lowy, Juval

    2008-01-01

    Programming WCF Services is the authoritative, bestselling introduction to Microsoft's unified platform for developing service-oriented applications (SOA) on Windows. This relentlessly practical book provides insight, not documentation, to help you learn the topics and skills you need for building WCF-based applications. Written by Microsoft software legend Juval Lowy, this new edition is revised for the latest productivity-enhancing features of C# 3.0 and the .NET 3.5 SP1 Framework.

  15. Approaching Service Innovation Patterns

    OpenAIRE

    Andrea NAGY

    2013-01-01

    The present paper aims at analyzing the types of innovation in the field of services. First, the concept of innovation is defined and second, field literature is reviewed from the perspective of service innovation. The main types of innovation are identified based on several attempts at defining innovation, the most notable being Schumpeter’s. Thus, it is possible to approach concepts such as product and process innovation, incremental and radical innovation. Another aim has been to regard se...

  16. Expert auditors’ services classification

    OpenAIRE

    Jolanta Wisniewska

    2013-01-01

    The profession of an expert auditor is a public trust occupation with a distinctive feature of taking responsibility for actions in the public interest. The main responsibility of expert auditors is performing financial auditing; however, expert auditors are prepared to carry out different tasks which encompass a wide plethora of financial and auditing services for different kinds of institutions and companies. The aim of the article is first of all the description of expert auditors’ service...

  17. MANAGING SERVICE QUALITY

    OpenAIRE

    Andreea BUDEANU

    2015-01-01

    Services are today the dominant sector of the economic activity both in terms of economic performance and labor utilization. Becoming an essential part of today’s society, they are considered the basis of a healthy economy, fact that has increased the importance of services and the research in the field. One of the biggest challenges regarding this sector is the evaluation and assurance of quality. There is still a lack of unanimity regarding the definitions, measurement procedures and the a...

  18. REMINDER FROM MEDICAL SERVICE

    CERN Multimedia

    Service Médical

    2000-01-01

    For medical problems, we would like to remind all personnel working on the CERN sites, be they staff or from outside firms, that they are welcome at the Infirmary, building 57, ground floor. For information, call the Nurses on telephone: 73802. by electronic mail to: Infirmary.Service@cern.chMarion.Diedrich@cern.ch Janet.Doody@cern.ch Mireille.Vosdey@cern.ch Medical Service

  19. REMINDER FROM MEDICAL SERVICE

    CERN Multimedia

    2003-01-01

    For medical problems, we would like to remind all personnel working on the CERN sites, staff members or from outside firms, that they are welcome at the Infirmary, building 57, ground floor. For information, call the nurses - on telephone: 73802 - by e-mail:Service.Médical@cern.ch Francoise.Lebrun-Klauser@cern.ch Mireille.Vosdey@cern.ch Katie.Warrillow-Thomson@cern.ch Medical Service

  20. REMINDER FROM MEDICAL SERVICE

    CERN Multimedia

    Medical Service

    2002-01-01

    For medical problems, we would like to remind all personnel working on the CERN sites, staff members or from outside firms, that they are welcome at the Infirmary, building 57, ground floor. For information, call the nurses: on telephone: 73802 by e-mail: Service.Medical@cern.ch Francoise.Lebrun-Klauser@cern.ch Mireille.Vosdey@cern.ch Katie.Warrillow-Thomson@cern.ch Medical Service

  1. REMINDER FROM MEDICAL SERVICE

    CERN Multimedia

    2003-01-01

    For medical problems, we would like to remind all personnel working on the CERN sites, staff members or from outside firms, that they are welcome at the Infirmary, building 57, ground floor. For information, call the nurses - on telephone: 73802 - by e-mail: Service.Médical@cern.ch Francoise.Lebrun-Klauser@cern.ch Mireille.Vosdey@cern.ch Katie.Warrillow-Thomson@cern.ch Medical Service

  2. REMINDER FROM MEDICAL SERVICE

    CERN Multimedia

    Medical Service

    2000-01-01

    For medical problems, we would like to remind all personnel working on the CERN sites, be they staff or from outside firms, that they are welcome at the Infirmary, building 57, ground floor.For information, call the Nurses on Telephone: 73802 or by electronic mail:Infirmary.Service@cern.chMarion.Diedrich@cern.ch Janet.Doody@cern.ch Mireille.Vosdey@cern.chMedicalService

  3. Reminder from Medical Service

    CERN Multimedia

    2003-01-01

    For medical problems, we would like to remind all personnel working on the CERN sites, staff members or from outside firms, that they are welcome at the Infirmary, building 57, ground floor. For information, contact the nurses on telephone: 73802 by e-mail: Service.Médical@cern.ch Francoise.Lebrun-Klauser@cern.ch Mireille.Vosdey@cern.ch Katie.Warrillow-Thomson@cern.ch Medical Service

  4. REMINDER FROM MEDICAL SERVICE

    CERN Multimedia

    Service médical

    2000-01-01

    For medical problems, we would like to remind all personnel working on the CERN sites,be they staff or from outside firms, that they are welcome at the Infirmary, building 57, ground floor.For information, call the Nurseson telephone: 73802.by electronic mail to:Infirmary.Service@cern.chMarion.Diedrich@cern.ch Janet.Doody@cern.ch Mireille.Vosdey@cern.chMedicalService

  5. Reminder from Medical Service

    CERN Multimedia

    Medical Service

    2004-01-01

    For medical problems, we would like to remind all personnel working on the CERN sites, staff members or from outside firms, that they are welcome at the Infirmary, building 57, ground floor. For information, call the nurses on telephone: 73802 by e-mail: Service.Medical@cern.ch Francoise.Lebrun-Klauser@cern.ch Mireille.Vosdey@cern.ch Katie.Warrillow-Thomson@cern.ch Medical Service

  6. Programming WCF Services

    CERN Document Server

    Lowy, Juval

    2008-01-01

    Written by Microsoft software legend Juval Lowy, Programming WCF Services is the authoritative introduction to Microsoft's new, and some say revolutionary, unified platform for developing service-oriented applications (SOA) on Windows. Relentlessly practical, the book delivers insight, not documentation, to teach developers what they need to know to build the next generation of SOAs. Not only will this book make you a WCF expert, it will deliver techniques and guidance to become a better software engineer. It's the Rosetta Stone of WCF.

  7. Industrial services at CERN

    CERN Multimedia

    2002-01-01

    The Bulletin looks at industrial services contracts and the real impact of the cost reductions at CERN. The level of industrial services contracts varies from one phase to another. For example, during the dismantling of LEP (photo) it rose substiantially to fall again at the end of dismantling. Industrial services contracts are an important resource for CERN. The level and nature of such contracts changes according to the phase of operation of the Laboratory. A construction phase, as for the LHC, requires a higher level of industrial services contracts compared with a period of normal running. During the operation of LEP, industrial services contracts were thus maintained at a level of 120 MCHF per year. The level rose to 156 MCHF in 2001 to include contracts awarded for dismantling LEP, and fell to about 144 MCHF in 2002 when the dismantling was complete. During the whole LHC construction period, up to 2007, industrial services spending will be stable in the range 135-140 MCHF per year. For the running pe...

  8. Fishing for ecosystem services.

    Science.gov (United States)

    Pope, Kevin L; Pegg, Mark A; Cole, Nicholas W; Siddons, Stephen F; Fedele, Alexis D; Harmon, Brian S; Ruskamp, Ryan L; Turner, Dylan R; Uerling, Caleb C

    2016-12-01

    Ecosystems are commonly exploited and manipulated to maximize certain human benefits. Such changes can degrade systems, leading to cascading negative effects that may be initially undetected, yet ultimately result in a reduction, or complete loss, of certain valuable ecosystem services. Ecosystem-based management is intended to maintain ecosystem quality and minimize the risk of irreversible change to natural assemblages of species and to ecosystem processes while obtaining and maintaining long-term socioeconomic benefits. We discuss policy decisions in fishery management related to commonly manipulated environments with a focus on influences to ecosystem services. By focusing on broader scales, managing for ecosystem services, and taking a more proactive approach, we expect sustainable, quality fisheries that are resilient to future disturbances. To that end, we contend that: (1) management always involves tradeoffs; (2) explicit management of fisheries for ecosystem services could facilitate a transition from reactive to proactive management; and (3) adaptive co-management is a process that could enhance management for ecosystem services. We propose adaptive co-management with an ecosystem service framework where actions are implemented within ecosystem boundaries, rather than political boundaries, through strong interjurisdictional relationships. Published by Elsevier Ltd.

  9. [Urban ecosystem services: A review].

    Science.gov (United States)

    Mao, Qi-zheng; Huang, Gan-lin; Wu, Jian-guo

    2015-04-01

    Maintaining and improving ecosystem services in urban areas and human well-being are essential for sustainable development and therefore constitute an important topic in urban ecology. Here we reviewed studies on ecosystem services in urban areas. Based on the concept and classification of urban ecosystem services, we summarized characteristics of urban ecosystem services, including the human domination, high demand of ecosystem services in urban areas, spatial heterogeneity and temporal dynamics of ecosystem services supply and demand in urban areas, multi-services of urban green infrastructures, the socio-economic dimension of ecosystem services supply and ecosystem disservices in urban areas. Among different urban ecosystem services, the regulating service and cultural service are particularly indispensable to benefit human health. We pointed out that tradeoffs among different types of ecosystem services mostly occur between supportive service and cultural service, as well as regulating service and cultural service. In particular, we emphasized the relationship between landscape design (i.e. green infrastructure) and ecosystem services supply. Finally, we discussed current gaps to link urban ecosystem services studies to landscape design and management and pointed out several directions for future research in urban ecosystem services.

  10. Penetrating Internet Information Services (IIS).

    African Journals Online (AJOL)

    PROF. O. E. OSUAGWU

    2013-12-01

    Dec 1, 2013 ... Information Services (IIS) packages have been presented. Note that while some of ... encompasses a variety of services including FTP, SMTP ..... for Web-based Distributed Authoring ... denial-of-service vulnerabilities we have.

  11. The science of service systems

    CERN Document Server

    Demirkan, Haluk; Krishna, Vikas

    2011-01-01

    This book presents a multidisciplinary and multisectoral perspective on the nature of service systems, on research and practice in service and on the future directions to advance service science.  It offers theory-based research with actionable results.

  12. 31 CFR 538.406 - Exportation of services; performance of service contracts; legal services.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Exportation of services; performance of service contracts; legal services. 538.406 Section 538.406 Money and Finance: Treasury Regulations... SUDANESE SANCTIONS REGULATIONS Interpretations § 538.406 Exportation of services; performance of service...

  13. Service validity and service reliability of search, experience and credence services. A scenario study

    NARCIS (Netherlands)

    Galetzka, Mirjam; Verhoeven, J.W.M.; Pruyn, Adriaan T.H.

    2006-01-01

    The purpose of this research is to add to our understanding of the antecedents of customer satisfaction by examining the effects of service reliability (Is the service “correctly” produced?) and service validity (Is the “correct” service produced?) of search, experience and credence services.

  14. Conceptual service architecture for adaptive mobile location services

    DEFF Research Database (Denmark)

    Schou, Saowanee

    2008-01-01

    This paper presents a conceptual service architecture for adaptive mobile location services designed to be used on the next generation wireless network. The developed service architecture consists of a set of concepts, principles, rules and guidelines for constructing, deploying, and operating...... the mobile location services. The service architecture identifies the components required to build the mobile location services and describes how these components are combined and how they should interact. As a means of exploring the developed conceptual service architecture, an illustrative case study...... of a new-concept tracking service is chosen to demonstrate the applicability of the architecture. Through the case study, the service request and response processes will be illustrated. New possible service functions provided by the developed service architecture will be examined and discussed...

  15. The Dilemma of Service Productivity and Service Innovation

    Science.gov (United States)

    Aspara, Jaakko; Klein, Jan F.; Luo, Xueming; Tikkanen, Henrikki

    2017-01-01

    We conduct a systematic exploratory investigation of the effects of firms’ existing service productivity on the success of their new service innovations. Although previous research extensively addresses service productivity and service innovation, this is the first empirical study that bridges the gap between these two research streams and examines the links between the two concepts. Based on a comprehensive data set of new service introductions in a financial services market over a 14-year period, we empirically explore the relationship between a firm’s existing service productivity and the firm’s success in introducing new services to the market. The results unveil a fundamental service productivity-service innovation dilemma: Being productive in existing services increases a firm’s willingness to innovate new services proactively but decreases the firm’s capabilities of bringing these services to the market successfully. We provide specific insights into the mechanism underlying the complex relationship between a firm’s productivity in existing services, its innovation proactivity, and its service innovation success. For managers, we not only unpack and elucidate this dilemma but also demonstrate that a focused customer scope and growth market conditions may enable firms to mitigate the dilemma and successfully pursue service productivity and service innovation simultaneously. PMID:29706764

  16. 75 FR 79052 - Excepted Service

    Science.gov (United States)

    2010-12-17

    ...: Roland Edwards, Senior Executive Resource Services, Employee Services, 202-606-2246. SUPPLEMENTARY.... Effective October 1, 2010. Department of Transportation DTGS60222 Director of Public Engagement for...

  17. 76 FR 2929 - Excepted Service

    Science.gov (United States)

    2011-01-18

    ...: Roland Edwards, Senior Executive Resource Services, Employee Services, 202-606-2246. SUPPLEMENTARY.... Effective November 18, 2010. DUGS00032 Intergovernmental and Public Engagement Liaison for Intergovernmental...

  18. PLANNING NATIONAL RADIOTHERAPY SERVICES

    Directory of Open Access Journals (Sweden)

    Eduardo eRosenblatt

    2014-11-01

    Full Text Available Countries, states and island nations often need forward planning of their radiotherapy services driven by different motives. Countries without radiotherapy services sponsor patients to receive radiotherapy abroad. They often engage professionals for a feasibility study in order to establish whether it would be more cost-beneficial to establish a radiotherapy facility. Countries where radiotherapy services have developed without any central planning, find themselves in situations where many of the available centres are private and thus inaccessible for a majority of patients with limited resources. Government may decide to plan ahead when a significant exodus of cancer patients travel to another country for treatment, thus exposing the failure of the country to provide this medical service for its citizens. In developed countries the trigger has been the existence of highly visible waiting lists for radiotherapy revealing a shortage of radiotherapy equipment.This paper suggests that there should be a systematic and comprehensive process of long-term planning of radiotherapy services at the national level, taking into account the regulatory infrastructure for radiation protection, planning of centres, equipment, staff, education pr

  19. Energy as a Service

    Science.gov (United States)

    Pell, Wolfgang

    Energie wird zum Gebrauchsgegenstand, zur Commodity und rückt doch in den Blickpunkt der Aufmerksamkeit. Volkswirtschaftliche, politische, gesellschaftliche und betriebswirtschaftliche Ansprüche lassen Services rund um die Energieversorgung (Energy-related Services) entstehen. Convenience Services, die den Ansprüchen der Konsumenten gerecht werden, wie Visualisierung von (dezentraler) Energieerzeugung und -verbrauch auf Basis digitaler Smart Meter, die den analogen Ferraris-Zähler ersetzen, sowie optimierter Energieeinsatz halten in Haushalten als digitalisierten Standorten (Smart Sites) Einzug. Energieoptimierung auf Basis des Paradigmas "Verbrauch folgt Erzeugung" stellt Nachfrageflexibilität industrieller Prozesse (Demand Response) als Energie-Effizienz-Faktor in den Vordergrund und lässt Services wie ihre Vermarktung als Regelenergie zur Stabilisierung der Netzfrequenz entstehen. Ein Innovation Action Plan liefert einen Ausblick, wohin die Integration neuer Technologien, die Steigerung der Kundennähe und die Entwicklung neuer Geschäftsmodelle die Energiewirtschaft führen kann. Mit Eco-Home und Power-Pool werden zwei konkrete Beispiele für Energy as a Service vorgestellt.

  20. Controllability of Train Service Network

    Directory of Open Access Journals (Sweden)

    Xuelei Meng

    2015-01-01

    Full Text Available Train service network is a network form of train service plan. The controllability of the train service plan determines the recovery possibility of the train service plan in emergencies. We first build the small-world model for train service network and analyze the scale-free character of it. Then based on the linear network controllability theory, we discuss the LB model adaptability in train service network controllability analysis. The LB model is improved and we construct the train service network and define the connotation of the driver nodes based on the immune propagation and cascading failure in the train service network. An algorithm to search for the driver nodes, turning the train service network into a bipartite graph, is proposed and applied in the train service network. We analyze the controllability of the train service network of China with the method and the results of the computing case prove the feasibility of it.

  1. 42 CFR 410.100 - Included services.

    Science.gov (United States)

    2010-10-01

    ... service; however, maintenance therapy itself is not covered as part of these services. (c) Occupational... increase respiratory function, such as graded activity services; these services include physiologic... rehabilitation plan of treatment, including physical therapy services, occupational therapy services, speech...

  2. The Internationalisation of Services

    DEFF Research Database (Denmark)

    Henten, Anders; Vad, Torben

    2003-01-01

    A recent Danish survey found that, in terms of the internationalisation of services, international WTO negotiations in this area will have to focus on a large number of issues. Moreover, the survey also highlighted the fact that many problems still exist within the European Union. Outlining a num...... a number of the barriers that companies face on foreign markets, the survey's overall results indicate that many of these obstacles prevent the internationalisation of services.......A recent Danish survey found that, in terms of the internationalisation of services, international WTO negotiations in this area will have to focus on a large number of issues. Moreover, the survey also highlighted the fact that many problems still exist within the European Union. Outlining...

  3. Service Robots for Hospitals

    DEFF Research Database (Denmark)

    Özkil, Ali Gürcan

    services to maintain the quality of healthcare provided. This thesis and the Industrial PhD project aim to address logistics, which is the most resource demanding service in a hospital. The scale of the transportation tasks is huge and the material flow in a hospital is comparable to that of a factory. We......Hospitals are complex and dynamic organisms that are vital to the well-being of societies. Providing good quality healthcare is the ultimate goal of a hospital, and it is what most of us are only concerned with. A hospital, on the other hand, has to orchestrate a great deal of supplementary...... believe that these transportation tasks, to a great extent, can be and will be automated using mobile robots. This thesis consequently addresses the key technical issues of implementing service robots in hospitals. In simple terms, a robotic system for automating hospital logistics has to be reliable...

  4. Trade in tourism services

    DEFF Research Database (Denmark)

    Jensen, Camilla; Zhang, Jie

    2013-01-01

    The article addresses two questions related with tourism as a service trade. Can tourism be explained as other export activities? Does service liberalisation have a positive or negative impact on tourism receipts in destination countries? Previous research has either focused on the demand side...... factors (i.e. factors of demand in the origin countries) or on tourism as a long-run factor of economic growth. The research shows that a complementary perspective such as that offered by trade in a supply side perspective can render additional insights towards understanding tourism. This approach can...... explain why countries have absolute and comparative advantage. Another finding is that tourism as an export can be explained by some of the same destination factors that explain other service exports. Using different panel estimators the importance of supply side factors that are to some extent exclusive...

  5. Radioactive sources service

    CERN Multimedia

    2006-01-01

    Please note that, as of 1st May, the Radioactive Sources Service will be open full-time, i.e. from 8.00 a.m. to 5.00 p.m., on alternate weeks (rather than part-time, from 8.00 a.m. to 11.00 a.m., every day, as at present). The weeks in which the Service will be open during the coming month are listed below: week No. 18: from 01/05 to 05/05 week No. 20: from 15/05 to 19/05 week No. 22: from 29/05 to 02/06 http://cern.ch/service-rp-sources

  6. Semantic Learning Service Personalized

    Directory of Open Access Journals (Sweden)

    Yibo Chen

    2012-02-01

    Full Text Available To provide users with more suitable and personalized service, personalization is widely used in various fields. Current e-Learning systems search for learning resources using information search technology, based on the keywords that selected or inputted by the user. Due to lack of semantic analysis for keywords and exploring the user contexts, the system cannot provide a good learning experiment. In this paper, we defined the concept and characteristic of the personalized learning service, and proposed a semantic learning service personalized framework. Moreover, we made full use of semantic technology, using ontologies to represent the learning contents and user profile, mining and utilizing the friendship and membership of the social relationship to construct the user social relationship profile, and improved the collaboration filtering algorithm to recommend personalized learning resources for users. The results of the empirical evaluation show that the approach is effectiveness in augmenting recommendation.

  7. Public Service Motivation

    Directory of Open Access Journals (Sweden)

    Raluca-Marilena Mihalcioiu

    2011-05-01

    Full Text Available Public Service Motivation concept was developed in North America and focuses on specific motivations of public servants, such as employee satisfaction, organizational commitment, reward preferences, organizational and individual performance. Other types of motivation, as financial consideration, are relevant but have less important influences with regard to this kind of work outcomes. This strengthen the assertion for a diversified motivational strategy, which affect various types of motivation, while not losing sight of the public value that one organization shows and therefore valuing public service motivation as a specific contribution to work outcomes. The concept has been increasingly applied in European public administration. This paper presents Status Quo of international Public Service Motivation research and locates in them empirical evidences from contries that are already working with this concept, like Austria. It also analyses implications for central questions of public management. The main focus of this article is general appropriateness and possible applications for Romanian public management research.

  8. Radiation Technician Scientist service

    International Nuclear Information System (INIS)

    Prieto Miranda, Enrique; Barrera Gonzalez, Gisela; Guerra Torres, Mercedes; Mora Lopez, Leonor; Altanes Valentin, Sonia; Rapado Paneque, Manuel; Plasencia Gutierrez, Manuel

    2003-01-01

    The irradiation service is part of the specialized technician scientist services of the Center of Technological Applications and Nuclear Development it belonging to the Radiobiological Department it provides a self shielded laboratory irradiator, PX y 30 type with Cobalt 60 sources, it destined for searches studies, so much basic as applying, in several branches of the science, like the radiobiology, the radiation chemistry, the solid state physics, the medicine, the agriculture and the Pharmaceutical- Medical Industry and besides offering the irradiation service properly with the which have been gotten significant economical outputs. The radiation processing is controlled by means of the dosimetric systems of Freckle, ceric cerous sulfate, Perspex (red, clear and Amber) and dose indicators

  9. 76 FR 46677 - Indoor Tanning Services; Cosmetic Services Excise Taxes

    Science.gov (United States)

    2011-08-03

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service 26 CFR Parts 40 and 49 [REG-112841-10] RIN 1545-BJ40 Indoor Tanning Services; Cosmetic Services Excise Taxes AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of public hearing on proposed rulemaking. SUMMARY: This document provides notice...

  10. Service use and unmet service needs in grandparents raising grandchildren.

    Science.gov (United States)

    Yancura, Loriena A

    2013-01-01

    Most in-depth studies of grandparents raising grandchildren use samples recruited from service providers, so little is known about those who do not use formal services. A sample of 200 grandparents registered with a public school district completed a survey on service use and unmet service needs. Of the 131 who did not use services, 82 reported unmet service needs, and 49 reported no needs. Those with unmet needs were younger, more likely to be Native Hawaiian, and less likely to receive public assistance. These findings indicate that some grandparents are falling through the cracks of the service provision network.

  11. Selling gas, selling services

    International Nuclear Information System (INIS)

    Moncel, V.

    1999-01-01

    Traditionally, the commercial activities of gas companies have been limited almost exclusively to the sale of gas. However, several socioeconomic factors specific to the gas industry, such as increasing customer expectations, competition between gas operators, a growing emphasis on services in many companies and the opening of public monopolies to competition, will bring inevitable change. Moreover, these developments coincide with imminent gas market opening. In response to the changing situation, the gas industry will seek to develop a range of multi-service offers, probably through external partnerships. (authors)

  12. Food Service System

    Science.gov (United States)

    1992-01-01

    The 3M Food Service System 2 employs a "cook/chill" concept for serving food in hospitals. The system allows staff to prepare food well in advance, maintain heat, visual appeal and nutritional value as well as reducing operating costs. The integral heating method, which keeps hot foods hot and cold foods cold, was developed by 3M for the Apollo Program. In the 1970s, the company commercialized the original system and in 1991, introduced Food Service System 2. Dishes are designed to resemble those used at home, and patient satisfaction has been high.

  13. Contribution of service companies

    International Nuclear Information System (INIS)

    Sole, L. M.; Cortes, A.

    2002-01-01

    The most influential aspect when choosing the model of contract between Client and Contractor relapses into the maturity reached by both parts. The service supplier will have to show his competence with his resume, not only technical, but also of actual actions concerning availability reliability, maintainability, security, environment and costs. That maturity may have been the reason why most of the service companies, of national scope, that carry out maintenance of nuclear power stations electricity and instrumentation nowadays, are present from the assembly and implementation phases of these nuclear power stations. (Author)

  14. RESTful Web Services Cookbook

    CERN Document Server

    Allamaraju, Subbu

    2010-01-01

    While the REST design philosophy has captured the imagination of web and enterprise developers alike, using this approach to develop real web services is no picnic. This cookbook includes more than 100 recipes to help you take advantage of REST, HTTP, and the infrastructure of the Web. You'll learn ways to design RESTful web services for client and server applications that meet performance, scalability, reliability, and security goals, no matter what programming language and development framework you use. Each recipe includes one or two problem statements, with easy-to-follow, step-by-step i

  15. Nuclear services for Japan

    International Nuclear Information System (INIS)

    Anderson, B.

    1991-01-01

    The UK Atomic Energy Authority (UKAEA) became AEA Technology in April 1990. The commercial interests are focussed through 4 business units: AEA Reactor Services, with whom several contracts have been won from Japanese customers for high resolution Field Emission Gun Scanning Transmission Electron Microscopy (FEGSTEM); AEA Fuel Services, a contract is being negotiated with an existing Japanese customer; AEA Decommissioning and Radwaste, with whom further development of an alternative approach to evaporation of liquid waste effluent for specific application in Japan is in progress; AEA Fusion. 1 fig

  16. SQL Server Integration Services

    CERN Document Server

    Hamilton, Bill

    2007-01-01

    SQL Server 2005 Integration Services (SSIS) lets you build high-performance data integration solutions. SSIS solutions wrap sophisticated workflows around tasks that extract, transform, and load (ETL) data from and to a wide variety of data sources. This Short Cut begins with an overview of key SSIS concepts, capabilities, standard workflow and ETL elements, the development environment, execution, deployment, and migration from Data Transformation Services (DTS). Next, you'll see how to apply the concepts you've learned through hands-on examples of common integration scenarios. Once you've

  17. Information Technology Service

    International Nuclear Information System (INIS)

    Ageron, M.; Boninchi, V.; Chartoire, M.; Combroux, A.; Giraud, N.; Jacquet, G.; Lagrange, B.; Malleret, S.; Martin, C.; Mas, J.; Morgue, M.; Ollivier, T.

    1998-01-01

    The information technology service works out the choices concerning the information technology systems of general use in the laboratory: computers, network, peripherals, workstations, software. It intervenes at the same time in the definition of the procedures and equipment specific to the research groups. The entire data acquisition is centralized by the service. The personnel is sharing the following two large directions of activities: - management of information technology park (setup, configuration and maintenance of the materials and soft ensemble, training and assistance afforded to users); - participation in software projects either in elaboration of applications or in realization and maintenance of specific tools

  18. Collaborative Service Arrangements

    DEFF Research Database (Denmark)

    J. May, Peter; Winter, Søren

    While much of prior research on collaboration addresses the service delivery network as a whole, we address collaborative relationships between one type of organization—municipal employment services—and a range of governmental and non-governmental partners for employment services in Denmark....... Municipalities differ in the type, degree, and character of collaboration with these partners. As others have found in prior research, we find that organizational benefits, trust, and a variety of contextual factors help shape the extent of collaboration. But, the relevance of these and problem-solving benefits...

  19. Service Interaction Flow Analysis Technique for Service Personalization

    DEFF Research Database (Denmark)

    Korhonen, Olli; Kinnula, Marianne; Syrjanen, Anna-Liisa

    2017-01-01

    Service interaction flows are difficult to capture, analyze, outline, and represent for research and design purposes. We examine how variation of personalized service flows in technology-mediated service interaction can be modeled and analyzed to provide information on how service personalization...... could support interaction. We have analyzed service interaction cases in a context of technology-mediated car rental service. With the analysis technique we propose, inspired by Interaction Analysis method, we were able to capture and model the situational service interaction. Our contribution regarding...... technology-mediated service interaction design is twofold: First, with the increased understanding on the role of personalization in managing variation in technology-mediated service interaction, our study contributes to designing service management information systems and human-computer interfaces...

  20. Trusted Service Scheduling and Optimization Strategy Design of Service Recommendation

    Directory of Open Access Journals (Sweden)

    Xiaona Xia

    2017-01-01

    Full Text Available More and more Web services raise the demands of personalized service recommendation; there exist some recommendation technologies, which improve the qualities of service recommendation by using service ranking and collaborative filtering. However, privacy and security are also important issues in service scheduling process; social relationships have been the key factors of interpersonal communication; service selection based on user preferences has become an inevitable trend. Starting from user demand preferences, this paper analyzes social topology and service demand information and obtains trusted social relationships; then we construct the fusion model of service historical preferences and potential ones; according to social service recommendation demands, TSRSR algorithm has completed designing. Through experiments, TSRSR algorithm is much better than the others, which can effectively improve potential preferences’ learning. Furthermore, the research results of this paper have more significance to study the security and privacy of service recommendation.

  1. The Service Failure and Recovery in the Information Technology Services

    OpenAIRE

    Jun Luo; Weiguo Zhang.; Dabin Qin

    2010-01-01

    It is important to retain customer satisfaction in information technology services. When a service failure occurs, companies need to take service recovery action to recover their customer satisfaction. Although companies cannot avoid all problems and complaints, they should try to make up. Therefore, service failure and service recovery have become an important and challenging issue for companies. In this paper, the literature and the problems in the information technolog...

  2. Service technologies as factor of service and tourism companies' competitiveness

    OpenAIRE

    Zhanna Gornostaeva; Vladimir Zhidkov

    2014-01-01

    The authors define the role of service technology in shaping the quality of service and tourism companies, the authors' method of measuring the quality of service and tourism businesses and developing a conceptual model of quality of service and the conceptual model of the internal quality of the service, and also carry out testing of the model on the example of the 'Intourist' Hotel in Volgograd, Russia.

  3. Service Industries. Trends and Prospects.

    Science.gov (United States)

    Bureau of Domestic Business Development (DOC), Washington, DC.

    This publication is designed to provide the business community with information on growing markets for many business and consumer services. Divided into two parts, the document overview in part I identifies two service area problems: lagging productivity gains and rapidly rising prices of services. The overview states, however, that service sector…

  4. Value-driven service matching

    NARCIS (Netherlands)

    Gordijn, Jaap; de Kinderen, Sybren; Wieringa, Roelf J.

    2008-01-01

    Today's economy is a service economy, and an increasing number of services is electronic, i.e. can be ordered and provisioned online. Examples include Internet access, email and Voice over IP. Just as any other kind of services, e-services often are offered in bundles, and many consumer needs

  5. Service Learning in Introductory Astronomy

    Science.gov (United States)

    Orleski, Michael

    2013-01-01

    Service learning is a method of instruction where the students in a course use the course's content in a service project. The service is included as a portion of the students' course grades. During the fall semester 2010, service learning was incorporated into the Introduction to Astronomy course at Misericordia University. The class had eight…

  6. The art of customer service.

    Science.gov (United States)

    Williams, Jeni

    2007-10-01

    Strategies for improving the consumer service skills of finance staff include: Hire employees who have a customer service background. Work with your human resources department to provide customer service training. Monitor new hires extensively. Offer front-end employees scripted language for situations they may face on the job. Measure the quality of customer service provided. Provide incentives for performance.

  7. The Competitive Advantage: Client Service.

    Science.gov (United States)

    Leffel, Linda G.; DeBord, Karen B.

    The adult education literature contains a considerable amount of research on and discussion of client service in the marketing process, management and staff roles in service- and product-oriented businesses, and the importance of client service and service quality to survival in the marketplace. By applying the principles of client-oriented…

  8. Service employees give as they get: internal service as a moderator of the service climate-service outcomes link.

    Science.gov (United States)

    Ehrhart, Karen Holcombe; Witt, L A; Schneider, Benjamin; Perry, Sara Jansen

    2011-03-01

    We lend theoretical insight to the service climate literature by exploring the joint effects of branch service climate and the internal service provided to the branch (the service received from corporate units to support external service delivery) on customer-rated service quality. We hypothesized that service climate is related to service quality most strongly when the internal service quality received is high, providing front-line employees with the capability to deliver what the service climate motivates them to do. We studied 619 employees and 1,973 customers in 36 retail branches of a bank. We aggregated employee perceptions of the internal service quality received from corporate units and the local service climate and external customer perceptions of service quality to the branch level of analysis. Findings were consistent with the hypothesis that high-quality internal service is necessary for branch service climate to yield superior external customer service quality. PsycINFO Database Record (c) 2011 APA, all rights reserved.

  9. The Dilemma of Service Productivity and Service Innovation: An Empirical Exploration in Financial Services.

    Science.gov (United States)

    Aspara, Jaakko; Klein, Jan F; Luo, Xueming; Tikkanen, Henrikki

    2018-05-01

    We conduct a systematic exploratory investigation of the effects of firms' existing service productivity on the success of their new service innovations. Although previous research extensively addresses service productivity and service innovation, this is the first empirical study that bridges the gap between these two research streams and examines the links between the two concepts. Based on a comprehensive data set of new service introductions in a financial services market over a 14-year period, we empirically explore the relationship between a firm's existing service productivity and the firm's success in introducing new services to the market. The results unveil a fundamental service productivity-service innovation dilemma: Being productive in existing services increases a firm's willingness to innovate new services proactively but decreases the firm's capabilities of bringing these services to the market successfully. We provide specific insights into the mechanism underlying the complex relationship between a firm's productivity in existing services, its innovation proactivity, and its service innovation success. For managers, we not only unpack and elucidate this dilemma but also demonstrate that a focused customer scope and growth market conditions may enable firms to mitigate the dilemma and successfully pursue service productivity and service innovation simultaneously.

  10. IT Services in Denmark

    DEFF Research Database (Denmark)

    Csonka, Agi Eva; Boll, Joachim

    The study presented in this paper is part of the European project: New Forms of Employment and Working Time in the Service Economy/NESY. The overall objective of the project is to analyse the emergence and the effects of new forms of employment, work organisation and working time patterns in the ...

  11. Marketing therapeutic recreation services.

    Science.gov (United States)

    Thorn, B E

    1984-01-01

    The use of marketing strategies can enhance the delivery of therapeutic recreation services. This article discusses how agencies can adapt marketing techniques and use them to identify potential markets, improve image, evaluate external pressures, and maximize internal strengths. Four variables that can be controlled and manipulated in a proposed marketing plan are product, price, place and promotion.

  12. The service bullwhip effect

    NARCIS (Netherlands)

    Akkermans, H.A.; Voss, C.

    2013-01-01

    Purpose This paper sets out to explore whether and how the bullwhip effect, as found in product supply chains, might also manifest itself in services, as well as what policies can be successful for mitigating it. Design/methodology/approach A combination of analytic methods was used—inductive case

  13. Governance of Ecosystem Services

    NARCIS (Netherlands)

    Primmer, Eeva; Jokinen, Pekka; Blicharska, Malgorzata; Barton, David N.; Bugter, Rob; Potschin, Marion

    2015-01-01

    Biodiversity conservation policies justified with science and intrinsic value arguments have produced disappointing outcomes, and the need for conservation is now being additionally justified with the concept of ecosystem services. However, little, if any empirical attention is paid to ways in

  14. Financial Services Marketing.

    Science.gov (United States)

    Olson, Lucretia Maria

    This manual contains student assignments in the financial services area of the marketing process. The individualized competency-based materials are intended to enhance and supplement instruction or to provide the basis for a course of instruction by the teacher-coordinator. Information on skills needed in jobs in financial marketing is first…

  15. Evaluation of radiodiagnostic services

    International Nuclear Information System (INIS)

    Yacovenco, Alejandro; Infantosi, A.F.C.; Tauhata, L.

    1996-01-01

    A preliminary evaluation of radiodiagnostic services is presented. Aspects such as legal responsibility, protection equipment, working conditions, personnel training, patients assistance are considered in a question's formulary. The results are briefly presented. The role of a quality control program is emphasized

  16. Mastering Go web services

    CERN Document Server

    Kozyra, Nathan

    2015-01-01

    If you are a web programmer with experience in developing web services and have a rudimentary knowledge of using Go, then this is the book for you. Basic knowledge of Go as well as knowledge of relational databases and non-relational NoSQL datastores is assumed. Some basic concurrency knowledge is also required.

  17. Virtual Libraries: Service Realities.

    Science.gov (United States)

    Novak, Jan

    This paper discusses client service issues to be considered when transitioning to a virtual library situation. Themes related to the transitional nature of society in the knowledge era are presented, including: paradox and a contradictory nature; blurring of boundaries; networks, systems, and holistic thinking; process/not product, becoming/not…

  18. Franchising reproductive health services.

    Science.gov (United States)

    Stephenson, Rob; Tsui, Amy Ong; Sulzbach, Sara; Bardsley, Phil; Bekele, Getachew; Giday, Tilahun; Ahmed, Rehana; Gopalkrishnan, Gopi; Feyesitan, Bamikale

    2004-12-01

    Networks of franchised health establishments, providing a standardized set of services, are being implemented in developing countries. This article examines associations between franchise membership and family planning and reproductive health outcomes for both the member provider and the client. Regression models are fitted examining associations between franchise membership and family planning and reproductive health outcomes at the service provider and client levels in three settings. Franchising has a positive association with both general and family planning client volumes, and the number of family planning brands available. Similar associations with franchise membership are not found for reproductive health service outcomes. In some settings, client satisfaction is higher at franchised than other types of health establishments, although the association between franchise membership and client outcomes varies across the settings. Franchise membership has apparent benefits for both the provider and the client, providing an opportunity to expand access to reproductive health services, although greater attention is needed to shift the focus from family planning to a broader reproductive health context.

  19. Service Discovery At Home

    NARCIS (Netherlands)

    Sundramoorthy, V.; Scholten, Johan; Jansen, P.G.; Hartel, Pieter H.

    Service discovery is a fady new field that kicked off since the advent of ubiquitous computing and has been found essential in the making of intelligent networks by implementing automated discovery and remote control between deviies. This paper provides an ovewiew and comparison of several prominent

  20. School Health Services

    Centers for Disease Control (CDC) Podcasts

    School health services reduce absenteeism and improve academic achievement according to research. If you have school-aged children, you'll want to listen to this podcast to learn more about healthy school environments and the link between health and academic achievement.

  1. MANAGEMENT OF MEDICAL SERVICES

    Directory of Open Access Journals (Sweden)

    BARBU MARIA-MAGDALENA

    2009-05-01

    Full Text Available The offer of medical services depends on medical personnel and more than this, on the management in the medical field since any resource not managed well or not managed at all is only a lost one, regardless its value. Management is therefore the key, the

  2. Headache service quality

    DEFF Research Database (Denmark)

    Schramm, Sara; Uluduz, Derya; Gouveia, Raquel Gil

    2016-01-01

    , producing evidence of what is majority practice. They also uncovered deficits that might be remedied in order to improve quality. They offer the means of setting benchmarks against which service quality may be judged. The next step is to take the evaluation process into non-specialist care (EHF/LTB levels 1...

  3. Transformative service design

    DEFF Research Database (Denmark)

    Sørensen, Kirsten Bonde

    2014-01-01

    -behaviour’. These handmade, artistic strategies turned out to be highly self-persuasive: the majority of the participants changed their perception and behaviour in relation to money. - See more at: http://www.service-design-network.org/products-page/article/tp05-3p54/#sthash.3MX79Wx6.dpuf...

  4. PENSION FUND BENEFITS SERVICE

    CERN Multimedia

    Benefits Service

    2002-01-01

    Please note that from now on, our offices (5-1-030) will be opened to members and beneficiaries on Tuesday, Wednesday and Thursday from 10 to 12 a.m. and from 3 to 5 p.m. We are otherwise available but by appointment only. Benefits Service (tel. 79194 / 72738)

  5. PENSION FUND BENEFITS SERVICE

    CERN Multimedia

    Benefits Service

    2002-01-01

    Please note that from now on, our offices will be opened to members and beneficiaries on Tuesday, Wednesday and Thursday from 10 to 12 a.m. and from 3 to 5 p.m. We are otherwise available but by appointment only. Benefits Service 5-1-030 tel. 79194 / 72738

  6. Beyond Collaborative Services

    DEFF Research Database (Denmark)

    Seravalli, Anna; Agger Eriksen, Mette

    2017-01-01

    between the designer and various other stakeholders. To navigate this rich complexity, we propose the two notions of commons and infrastructuring, and we do that by re ecting on the case of designing a makerspace, Fabriken, a sharing-based collaborative service. We use the notion of commons as a framework...

  7. TRANSLATING SERVICE TECHNICAL PROSE

    African Journals Online (AJOL)

    language. The Application of Technical Service. Prose. To form a good idea of the appl ication .... cost lives. In this particular domain, translators must have a sound technical ... These semantic ... another language and often, in doing so, changing its meaning. The words ..... He will hand out tasks to each translator and after.

  8. Augmented reality services

    Directory of Open Access Journals (Sweden)

    Tomáš Koubek

    2013-01-01

    Full Text Available We assume that one of the key reasons is in the difference between a standalone application and a web service. Both architectures have some advantages and disadvantages. The Standalone application (e.g. Nokia/OVI Maps provides the required functionality. From the user point of view, main asset of this “offline” approach is network connectivity independence. However, this kind of applications must be upgraded manually. Moreover, it is hard to get any data about the application usage because it requires additional actions from the user – data are usually acquired through conventional ways, such as email or web forms.The online service such as Google Maps (including its mobile application can offer the same functionality as the offline application. Nevertheless, a permanent connection to provider servers is necessary. This can be taken as a drawback. On the other hand, usage data collection is easier and can be done without the user intervention. The data collection provides a valuable analysis basis of the user habits and needs. This analysis is necessary for design of a complex “user” based solutions such as Google Now.Augmented reality applications are usually based on the first mentioned approach. In this article, we describe our model of augmented reality as a service and compare its features with standalone solutions. Further, other important key aspects for large emergence of augmented reality services in a mainstream market are discussed.

  9. Global Sourcing of Services

    DEFF Research Database (Denmark)

    Ørberg Jensen, Peter D.; Petersen, Bent

    2013-01-01

    The global sourcing of services offers high returns but is also associated with high risks. The extent to which firms engage in ‘transformational’ global sourcing (i.e., global sourcing implying considerable changes in the home organization) chiefly depends on management's comfort zone which...

  10. Marketing mobile imaging services.

    Science.gov (United States)

    McCue, P

    1987-09-01

    Competition in the mobile imaging arena has put radiologists, radiology directors, and other health care professionals in the unfamiliar position of being marketing agents for their services. Mobile imaging is being promoted through consumer advertising as well as through the traditional route of physician referral. This article offers some of the marketing lessons being learned in the mobile arena.

  11. CLOUD SERVICES IN EDUCATION

    Directory of Open Access Journals (Sweden)

    Z.S. Seydametova

    2011-05-01

    Full Text Available We present the on-line services based on cloud computing, provided by Google to educational institutions. We describe the own experience of the implementing the Google Apps Education Edition in the educational process. We analyzed and compared the other universities experience of using cloud technologies.

  12. Hospitality services generate revenue.

    Science.gov (United States)

    Bizouati, S

    1993-01-01

    An increasing number of hospitals are undertaking external revenue-generating activities to supplement their shrinking budgets. Written at the request of Leadership, this article outlines an example of a successful catering service -- a money-generating business that more Canadian hospitals could profitably consider.

  13. Avoiding Service Station Fraud.

    Science.gov (United States)

    Burton, Grace M.; Burton, John R.

    1982-01-01

    High school students are warned against service station fraud. A problem-solving section is designed to help students calculate consumer costs for various fraudulent transactions. Several ways of reducing fraud or of lessening the chances of problems are noted. (MP)

  14. Outsourcing Special Education Services

    Science.gov (United States)

    McKenzie, Anne S.; Bishop, Anna M.

    2009-01-01

    The Lower Pioneer Valley Educational Collaborative, organized in 1974, consists of seven school districts legally bound in a governance structure. Although the member districts are located in Hampden County, Massachusetts, the collaborative provides educational programs and services to school districts and municipalities throughout western…

  15. Outsourcing Support Services.

    Science.gov (United States)

    McClure, James A.

    2000-01-01

    Successful outsourcing is a learning process demanding careful planning, commitment, and heavy communication. The process also requires a strong leadership and a cohesive school board ready to weather a cultural change. Service employee options, contractors' managerial expertise, increased efficiency, and partnership opportunities are possible…

  16. Telecommunications and Universal Service

    International Development Research Centre (IDRC) Digital Library (Canada)

    The book is intended to provide valuable input to the Universal Service Agency .... Figure 1 is not, of course, drawn to scale for South Africa. .... Such uneconomic customers and areas are mainly found in rural, peripheral, and less favoured regions. ... The United Kingdom is a good example of the enduring nature of this task.

  17. Payments for Ecosystem Services

    DEFF Research Database (Denmark)

    Chan, Kai M.A; Anderson, Emily K.; Chapman, Mollie

    2017-01-01

    Payments for ecosystem services (PES) programs are one prominent strategy to address economic externalities of resource extraction and commodity production, improving both social and ecological outcomes. But do PES and related incentive programs achieve that lofty goal? Along with considerable en...... sustainable relationships with nature, conserving and restoring ecosystems and their benefits for people now and in the future....

  18. Accessibility of public services

    NARCIS (Netherlands)

    Poort, J.P.; Groot, I.; Kok, L.; de Graaf, D.; Hof, B.J.F.

    2005-01-01

    The accessibility of certain products and services to all people, irrespective of their income, age, health and geographical location is considered to be of great social importance. Think for instance of health care, education, electricity, and sanitation. Accessibility can be secured in a variety

  19. At Your Service.

    Science.gov (United States)

    Roberts, Marnie

    2000-01-01

    Describes Providence Place Academy in Rhode Island, the "School at the Mall" where students work for 90 minutes per day at various stores to learn about the retail industry while reinforcing what they learn in the retail/marketing-based curriculum and acquiring customer service skills. (JOW)

  20. Hospitality Services. Curriculum Guide.

    Science.gov (United States)

    Texas Tech Univ., Lubbock. Home Economics Curriculum Center.

    This guide, which was developed as part of Texas' home economics education program, is intended to assist teachers of a hospitality services course focusing on the food and lodging segments of the hospitality and tourism industry. The first 40% of the approximately 600-page guide consists of strategies for teaching each of 29 essential…

  1. Public Service Telecommunications: PEACESAT.

    Science.gov (United States)

    Okamura, Norman H.; Mukaida, Lori Van Dusen

    1996-01-01

    Describes the Pan-Pacific Education and Communication Experiments by Satellite (PEACESAT), a public service telecommunication program developed to facilitate the use of telecommunications and information technologies. Highlights include the historical development; digital capabilities; cooperation and collaboration with users, government, and…

  2. Franchising Reproductive Health Services

    Science.gov (United States)

    Stephenson, Rob; Tsui, Amy Ong; Sulzbach, Sara; Bardsley, Phil; Bekele, Getachew; Giday, Tilahun; Ahmed, Rehana; Gopalkrishnan, Gopi; Feyesitan, Bamikale

    2004-01-01

    Objectives Networks of franchised health establishments, providing a standardized set of services, are being implemented in developing countries. This article examines associations between franchise membership and family planning and reproductive health outcomes for both the member provider and the client. Methods Regression models are fitted examining associations between franchise membership and family planning and reproductive health outcomes at the service provider and client levels in three settings. Results Franchising has a positive association with both general and family planning client volumes, and the number of family planning brands available. Similar associations with franchise membership are not found for reproductive health service outcomes. In some settings, client satisfaction is higher at franchised than other types of health establishments, although the association between franchise membership and client outcomes varies across the settings. Conclusions Franchise membership has apparent benefits for both the provider and the client, providing an opportunity to expand access to reproductive health services, although greater attention is needed to shift the focus from family planning to a broader reproductive health context. PMID:15544644

  3. Logistics Services Reminder

    CERN Multimedia

    Logistics Services

    2016-01-01

    Members of the personnel are invited to take note that only parcels corresponding to official orders or contracts will be handled at CERN. Individuals are not authorised to have private merchandise delivered to them at CERN and private deliveries will not be accepted by the Goods Reception services. Thank you for your understanding.

  4. Locks and Keys Service

    CERN Multimedia

    Claude Ducastel

    The GS-LS-SEM section is pleased to inform you that as from Monday 30 November 2009, the opening hours of the Locks and Keys service will be the following: 08h30 - 12h30 / 13h30 - 16:30, Mondays to Fridays. GS-SEM-LS 73333

  5. Service discovery at home

    NARCIS (Netherlands)

    Sundramoorthy, V.; Scholten, Johan; Jansen, P.G.; Hartel, Pieter H.

    2003-01-01

    Service discovery is a fairly new field that kicked off since the advent of ubiquitous computing and has been found essential in the making of intelligent networks by implementing automated discovery and remote control between devices. This paper provides an overview and comparison of several

  6. Reconceptualising Shared Services

    Directory of Open Access Journals (Sweden)

    Peter McKinlay

    2011-12-01

    Full Text Available Endeavours to improve the efficiency and effectiveness of local government have been a persistent theme both of politicians in higher tiers of government and of interest groups, especially business. The two contenders for improvement which receive most coverage both in the research literature and in popular discussion are amalgamation and shared services. Arguments from the literature have generally favoured shared services over amalgamation. Bish (2001 in a comprehensive review of North American research dismisses the argument for amalgamation as a product of flawed nineteenth-century thinking and a bureaucratic urge for centralized control. He does so making the very reasonable point that the presumed economies of scale which will result from amalgamation are a function not of the size and scale of individual local authorities, but of the services for which those local authorities are responsible, and the point at which economies of scale will be optimised will be very different for different services. The case against amalgamation is also reinforced by the absence of any significant post-facto evidence that amalgamation achieves either the promised savings or the anticipated efficiency gains (McKinlay 2006.

  7. REMINDER FROM MEDIAL SERVICE

    CERN Multimedia

    Service médical

    2000-01-01

    For medical problems, we would like to remind all personnel working on the CERN sites, be they staff or from outside firms, that they are welcome at the Infirmary, building 57, ground floor. For information, call the Nurses - on Telephone: 73802. - by electronic mail: Infirmary.Service@cern.ch Marion.Diedrich@cern.ch Janet.Doody@cern.ch Mireille.Vosdey@cern.ch

  8. REMINDER FROM MEDICAL SERVICE

    CERN Multimedia

    Medical Service

    2001-01-01

    For medical problems, we would like to remind all personnel working on the CERN sites, be they staff or from outside firms, that they are welcome at the Infirmary, building 57, ground floor. For information, call the Nurses on Telephone: 73802. by electronic mail: Infirmary.Service@cern.ch Marion.Diedrich@cern.ch Janet.Doody@cern.ch Mireille.Vosdey@cern.ch

  9. REMINDER FROM MEDICAL SERVICE

    CERN Multimedia

    Medical Service

    2000-01-01

    For medical problems, we would like to remind all personnel working on the CERN sites, be they staff or from outside firms, that they are welcome at the Infirmary, building 57, ground floor. For information, call the Nurses on Telephone: 73802. by electronic mail: Infirmary.Service@cern.ch Marion.Diedrich@cern.ch Janet.Doody@cern.ch Mireille.Vosdey@cern.ch

  10. REMINDER FROM MEDICAL SERVICE

    CERN Multimedia

    Medical Service

    2001-01-01

    For medical problems, we would like to remind all personnel working on the CERN sites, be they staff or from outside firms, that they are welcome at the Infirmary, building 57, ground floor. For information, call the Nurses on telephone: 73802. by electronic mail: Infirmary.Service@cern.ch Marion.Diedrich@cern.ch Janet.Doody@cern.ch Mireille.Vosdey@cern.ch

  11. Provider of Services File

    Data.gov (United States)

    U.S. Department of Health & Human Services — The POS file consists of two data files, one for CLIA labs and one for 18 other provider types. The file names are CLIA and OTHER. If downloading the file, note it...

  12. EURESCOM Services Platform

    NARCIS (Netherlands)

    Nieuwenhuis, Lambertus Johannes Maria; van Halteren, Aart

    1999-01-01

    This paper presents the results of the EURESCOM Project 715. In February 1999, a large team of researchers from six European public network operators completed a two year period of cooperative experiments on a TINA-based environment, called the EURESCOM Services Platform (ESP). This platform

  13. Learning Space Service Design

    Science.gov (United States)

    Felix, Elliot

    2011-01-01

    Much progress has been made in creating informal learning spaces that incorporate technology and flexibly support a variety of activities. This progress has been principally in designing the right combination of furniture, technology, and space. However, colleges and universities do not design services within learning spaces with nearly the same…

  14. Severe service sealing solutions

    International Nuclear Information System (INIS)

    Metcalfe, R.; Wensel, R.

    1994-09-01

    Successful sealing usually requires much more than initial leak-tightness. Friction and wear must also be acceptable, requiring a good understanding of tribology at the sealing interface. This paper describes various sealing solutions for severe service conditions. The CAN2A and CAN8 rotary face seals use tungsten carbide against carbon-graphite to achieve low leakage and long lifetime in nuclear main coolant pumps. The smaller CAN6 seal successfully uses tungsten carbide against silicon carbide in reactor water cleanup pump service. Where friction in CANDU fuelling machine rams must be essentially zero, a hydrostatic seal using two silicon carbide faces is the solution. In the NRU reactor moderator pumps, where pressure is much lower, eccentric seals that prevent boiling at the seal faces are giving excellent service. All these rotary face seals rely on supplementary elastomer seals between their parts. An integrated engineering approach to high performance sealing with O-rings is described. This is epitomized in critical Space Shuttle applications, but is increasingly being applied in CANDU plants. It includes gland design, selection and qualification of material, quality assurance, detection of defects and the effects of lubrication, surface finish, squeeze, stretch and volume constraints. In conclusion, for the severe service applications described, customized solutions have more than paid for themselves by higher reliability, lower maintenance requirements and reduced outage time. (author)

  15. Hydrologic Services Course.

    Science.gov (United States)

    National Oceanic and Atmospheric Administration (DOC), Rockville, MD. National Weather Service.

    A course to develop an understanding of the scope of water resource activities, of the need for forecasting, of the National Weather Service's role in hydrology, and of the proper procedures to follow in fulfilling this role is presented. The course is one of self-help, guided by correspondence. Nine lessons are included: (1) Hydrology in the…

  16. REST based service composition

    DEFF Research Database (Denmark)

    Grönvall, Erik; Ingstrup, Mads; Pløger, Morten

    2011-01-01

    This paper presents an ongoing work developing and testing a Service Composition framework based upon the REST architecture named SECREST. A minimalistic approach have been favored instead of a creating a complete infrastructure. One focus has been on the system's interaction model. Indeed, an aim...

  17. Mastering ServiceNow

    CERN Document Server

    Wood, Martin

    2015-01-01

    This book is intended for those who are familiar with web technologies such as JavaScript. We start from the computing fundamentals to understand how ServiceNow is architected, working from the ground up to really leverage the full capabilities of the platform.

  18. Malawi's Mental Health Service

    African Journals Online (AJOL)

    ual, the child running off into the bush, the adoles- cent who almost unnoticed begins to lose concentration and fail at his studies. ... Malawi Medical Journal. .... topic. In this way the specialist service comes out to the district, rather than all those ...

  19. Wearable probes for service design

    DEFF Research Database (Denmark)

    Mullane, Aaron; Laaksolahti, Jarmo Matti; Svanæs, Dag

    2014-01-01

    Probes are used as a design method in user-centred design to allow end-users to inform design by collecting data from their lives. Probes are potentially useful in service innovation, but current probing methods require users to interrupt their activity and are consequently not ideal for use...... by service employees in reflecting on the delivery of a service. In this paper, we present the ‘wearable probe’, a probe concept that captures sensor data without distracting service employees. Data captured by the probe can be used by the service employees to reflect and co-reflect on the service journey......, helping to identify opportunities for service evolution and innovation....

  20. Knowledge Transfer Services

    Directory of Open Access Journals (Sweden)

    Albert Simard

    2009-03-01

    Full Text Available Le présent article décrit un modèle visant à faciliter la compréhension du processus de transfert du contenu depuis sa source jusqu’à son utilisation. Un groupe de travail de Ressources naturelles Canada a étudié la nature du transfert des savoirs à l’aide d’un modèle de services, afin de découvrir et comprendre les modèles et processus sous-jacents. Les services de savoir sont des programmes qui créent et fournissent des produits organisationnels basés sur un contenu et ayant une valeur intégrée. Ces programmes sont destinés à être utilisés en interne ou transférés pour répondre aux souhaits et besoins d’un utilisateur externe. Les critères de conception du modèle sont les suivants : indépendance par rapport au contenu, concentration sur l’organisation, évolutivité, deux pilotes et deux niveaux de résolution. Le modèle est basé sur une chaîne de valeur dans laquelle la valeur est intégrée, déplacée ou extraite. Un système de services de savoir se divise en neuf étapes : générer, transformer, gérer, utiliser en interne, transférer, ajouter de la valeur, utiliser professionnellement, utiliser personnellement et évaluer. Les services de savoir sont fournis par l’intermédiaire d’un spectre de distribution allant de complexe à accessible. À chaque région du spectre de distribution correspond une série d’attributs qui influencent la manière dont les services sont fournis.This paper describes a model intended to increase understanding of how content is transferred from its source to its use. A Natural Resources Canada task group explored the nature of knowledge transfer with a services paradigm to discover and understand underlying patterns and processes. Knowledge Services are programs that produce and pro-vide content-based organizational outputs with embedded value that are intended to be used internally or transferred to meet external user wants or needs. Model design criteria