Germany: Family diversity with low actual and desired fertility

Directory of Open Access Journals (Sweden)

Jürgen Dorbritz

2008-07-01

Full Text Available Germany is a low-fertility country with a rapidly ageing population, and will remain so for the foreseeable future. There are several reasons for this trend. Germany is among the countries with the highest rates of childlessness in the world, and childlessness has become widely accepted. This is illustrated by changes in living arrangements. A broad range of living arrangements has been added to the basic model of marriage with children; namely, single living, non-marital cohabitation, lone parenthood, patchwork families and living apart together. A culture of individualism has spread in Germany which forms the basis for widespread decisions against family formation. The desired number of children has become low and family policy is considered to be a failure in terms of its influence on fertility. German family policy has had a traditional orientation centred on monetary support to families and on the promotion of the male breadwinner model. Women have been largely forced to choose between family and work, and leave the labour market when a child is born. The still prevailing concept of family policy does not help to reduce the pressure to choose between work and family life, and thus makes it easier to decide not to have children, especially for highly educated women. A change in family policy is needed which will enable couples to choose between the breadwinner-housewife and the reconciliation model. Gradually, this change is starting to take place.

The economic substantiation for choosing the hopper car for the transportation of grain

Directory of Open Access Journals (Sweden)

Bitutskaya A. M.

2016-07-01

Full Text Available the article studied the choice of parameters for the hopper car for transportation the most popular grain cargoes and on the basis of this calculated the required fleet. The authors point out the economic feasibility of the purchase of specialized cars only in case when the total value of required depot of cars, which is calculated by increasing the proportion of «light» cargo in the total cargo turnover, is lower for specialized cars than for universal.

The capacity to choose: reformulating the concept of choice in economic theory

Directory of Open Access Journals (Sweden)

Mark S. Peacock

2011-05-01

Full Text Available Despite being conceived as a ‘theory of rational choice’, orthodox economics fails to ascribe to human beings the ability to choose in a meaningful sense, something philosophical approaches to economics have long noted and tried to remedy. Tony Lawson’s critical realism is one attempt at a remedy. If, following Lawson, one conceives of choice as a ‘capacity’ of human beings, critical realist analysis suggests a distinction between humans’ possession and their exercise of this capacity. If one can sustain this distinction, one should be able to distinguish cases in which agents actually exercise their capacity to choose from those in which they do not. Investigation of this distinction does not, however, lead to the desired distinction between such cases. Consequently, a reformulation of the notion of choice is required. An implication for economic theory – namely, the possibility of conceptualizing ‘exploitation’ – is discussed.

Film grain noise modeling in advanced video coding

Science.gov (United States)

Oh, Byung Tae; Kuo, C.-C. Jay; Sun, Shijun; Lei, Shawmin

2007-01-01

A new technique for film grain noise extraction, modeling and synthesis is proposed and applied to the coding of high definition video in this work. The film grain noise is viewed as a part of artistic presentation by people in the movie industry. On one hand, since the film grain noise can boost the natural appearance of pictures in high definition video, it should be preserved in high-fidelity video processing systems. On the other hand, video coding with film grain noise is expensive. It is desirable to extract film grain noise from the input video as a pre-processing step at the encoder and re-synthesize the film grain noise and add it back to the decoded video as a post-processing step at the decoder. Under this framework, the coding gain of the denoised video is higher while the quality of the final reconstructed video can still be well preserved. Following this idea, we present a method to remove film grain noise from image/video without distorting its original content. Besides, we describe a parametric model containing a small set of parameters to represent the extracted film grain noise. The proposed model generates the film grain noise that is close to the real one in terms of power spectral density and cross-channel spectral correlation. Experimental results are shown to demonstrate the efficiency of the proposed scheme.

Multicultural desires? Parental negotiation of multiculture and difference in choosing secondary schools for their children

Science.gov (United States)

Byrne, Bridget; de Tona, Carla

2014-01-01

This paper considers the ways in which parents talk about choosing secondary schools in three areas of Greater Manchester. It argues that this can be a moment when parents are considering their own attitudes to, and shaping their children's experiences of, multiculture. Multiculture is taken as the everyday experience of living with difference. The paper argues that multiculture needs to be understood as shaped not only by racialized, ethnic or religious difference (as it is commonly understood) but also by other differences which parents may consider important, particularly class and approaches to parenting. We stress the need to examine what parents say about schooling in the context in which they are talking, which is shaped by local areas and the experiences of their children in primary schools. Based on interviews with an ethnically mixed groups of parents from different schools, we show how perceptions of the racialized and class demographics of schools can influence parents' choice of secondary schools. The paper also argues that attention needs to be paid to the ways in which terms such as ‘multicultural’ and ‘mix’ are applied uniformly to very different contexts, be they particular schools or local areas, suggesting there is a paucity of language in Britain when talking about multiculture. PMID:25506091

Conscience and responsability in choosing the teaching profession

Directory of Open Access Journals (Sweden)

Daniela Căprioară

2017-05-01

Full Text Available Given the conditions of a society oriented towards material satisfaction, where the didactic profession is sometimes pushed to the limit of social respect, where the lack of motivation and interest for school and learning, in general, is increasingly invoked, there are young people who choose to dedicate their whole energy for training and educating the new generations. The basis of this choice is the consciousness of the role of the teacher in the life of a child and, at the same time, the responsability for the assumed mission: opening the way to knowledge. Vocation and talent are necessary conditions of a successful pedagogical model, but only complemented by the love for children, the desire to contribute to the formation of people, the joy of giving knowledge and love.

Large scale statistics for computational verification of grain growth simulations with experiments

International Nuclear Information System (INIS)

Demirel, Melik C.; Kuprat, Andrew P.; George, Denise C.; Straub, G.K.; Misra, Amit; Alexander, Kathleen B.; Rollett, Anthony D.

2002-01-01

It is known that by controlling microstructural development, desirable properties of materials can be achieved. The main objective of our research is to understand and control interface dominated material properties, and finally, to verify experimental results with computer simulations. We have previously showed a strong similarity between small-scale grain growth experiments and anisotropic three-dimensional simulations obtained from the Electron Backscattered Diffraction (EBSD) measurements. Using the same technique, we obtained 5170-grain data from an Aluminum-film (120 (micro)m thick) with a columnar grain structure. Experimentally obtained starting microstructure and grain boundary properties are input for the three-dimensional grain growth simulation. In the computational model, minimization of the interface energy is the driving force for the grain boundary motion. The computed evolved microstructure is compared with the final experimental microstructure, after annealing at 550 C. Characterization of the structures and properties of grain boundary networks (GBN) to produce desirable microstructures is one of the fundamental problems in interface science. There is an ongoing research for the development of new experimental and analytical techniques in order to obtain and synthesize information related to GBN. The grain boundary energy and mobility data were characterized by Electron Backscattered Diffraction (EBSD) technique and Atomic Force Microscopy (AFM) observations (i.e., for ceramic MgO and for the metal Al). Grain boundary energies are extracted from triple junction (TJ) geometry considering the local equilibrium condition at TJ's. Relative boundary mobilities were also extracted from TJ's through a statistical/multiscale analysis. Additionally, there are recent theoretical developments of grain boundary evolution in microstructures. In this paper, a new technique for three-dimensional grain growth simulations was used to simulate interface migration

Post-Coma Persons with Motor and Communication/Consciousness Impairments Choose among Environmental Stimuli and Request Stimulus Repetitions via Assistive Technology

Science.gov (United States)

Lancioni, Giulio E.; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Buonocunto, Francesca; Sacco, Valentina; Colonna, Fabio; Navarro, Jorge; Lanzilotti, Crocifissa; Oliva, Doretta; Megna, Gianfranco

2010-01-01

This study assessed whether a program based on microswitch and computer technology would enable three post-coma participants (adults) with motor and communication/consciousness impairments to choose among environmental stimuli and request their repetition whenever they so desired. Within each session, 16 stimuli (12 preferred and 4 non-preferred)…

Grain yield and baking quality of wheat under different sowing dates

Directory of Open Access Journals (Sweden)

Raphael Rossi Silva

2014-04-01

Full Text Available Choosing the right sowing dates can maximize the outcomes of the interaction between genotype and environment, thus increasing grain yield and baking quality of wheat (Triticum aestivum L.. The present study aimed at determining the most appropriate sowing dates that maximize grain yield and baking quality of wheat cultivars. Seven wheat cultivars (BRS 179, BRS Guamirim, BRS Guabiju, BRS Umbu, Safira, CD 105 and CD 115 were evaluated at four sowing dates (the 1st and the 15th of June and July in two harvesting seasons (2007 and 2008. The study was setup in a completely randomized block design with four repetitions. The effects of the year and sowing date when combined explained 93% of the grain yield variance. In 2007, the CD 105 and Safira cultivars had the highest grain yield (GY for all sowing dates. Only the BRS Guabiju and Safira cultivars possessed high baking quality for all sowing dates assessed. In 2008, the environmental conditions were favorable for superior GY, but the baking quality was inferior. Considering adapted cultivars and sowing dates, it is possible to maximize grain yield and baking quality of wheat.

Design of Grain Refiners for Aluminium Alloys

Science.gov (United States)

Tronche, A.; Greer, A. L.

The efficiency of a grain refiner can be quantified as the number of grains per nucleant particle in the solidified product. Even for effective refiners in aluminium, such as Al-5Ti-1B, it is known from experiments that efficiencies are very low, at best 10-3 to 102. It is of interest to explore the reasons for such low values, and to assess the prospects for increased efficiency though design of refiners. Recently it has been shown [1] that a simple recalescence-based model can make quantitative predictions of grain size as a function of refiner addition level, cooling rate and solute content. In the model, the initiation of grains is limited by the free growth from nucleant particles, the size distribution of which is very important. The present work uses this model as the basis for discussing the effect of particle size distribution on grain refiner performance. Larger particles (of TiB2 in the case of present interest) promote greater efficiency, as do narrower size distributions. It is shown that even if the size distribution could be exactly specified, compromises would have to be made to balance efficiency (defined as above) with other desirable characteristics of a refiner.

The object of sexual desire: examining the "what" in "what do you desire?".

Science.gov (United States)

Mark, Kristen; Herbenick, Debby; Fortenberry, Dennis; Sanders, Stephanie; Reece, Michael

2014-11-01

Over the past two decades, sexual desire and desire discrepancy have become more frequently studied as have potential pharmaceutical interventions to treat low sexual desire. However, the complexities of sexual desire-including what exactly is desired-remain poorly understood. To understand the object of men's and women's sexual desire, evaluate gender differences and similarities in the object of desire, and examine the impact of object of desire discrepancies on overall desire for partner in men and women in the context of long-term relationships. A total of 406 individuals, 203 men and 203 women in a relationship with one another, completed an online survey on sexual desire. Reports of the object of sexual desire in addition to measures of sexual desire for current partner were collected from both members of the couple. There were significant gender differences in the object of sexual desire. Men were significantly more likely to endorse desire for sexual release, orgasm, and pleasing their partner than were women. Women were significantly more likely to endorse desire for intimacy, emotional closeness, love, and feeling sexually desirable than men. Discrepancies within the couple with regard to object of desire were related to their level of sexual desire for partner, accounting for 17% of variance in men's desire and 37% of variance in women's desire. This research provides insights into the conceptualization of sexual desire in long-term relationships and the multifaceted nature of sexual desire that may aid in more focused ways to maintain desire over long-term relationships. Future research on the utility of this perspective of sexual desire and implications for clinicians working with couples struggling with low sexual desire in their relationships is discussed. © 2014 International Society for Sexual Medicine.

Subgroup report on grain boundary and interphase boundary structure and properties

International Nuclear Information System (INIS)

Balluffi, R.W.; Cannon, R.M.; Clarke, D.R.; Heuer, A.H.; Ho, P.S.; Kear, B.H.; Vitek, V.; Weertman, J.R.; White, C.L.

1979-01-01

In many high temperature structural applications, the performance characteristics of a materials system are largely controlled by the properties of its grain and interphase boundaries. Failure in creep and fatigue frequently occurs by cavitation, or cracking along grain boundaries. In a few special cases, this failure problem has been overcome by directional alignment of grain and interphase boundaries by various types of metallurgical processing such as directional solidification and directional recrystallization. A good example is to be found in the application of directionally aligned structures in high performance gas-turbine airfoils. However, where fine, equiaxed grain structures are desirable, other methods of controlling grain boundary properties have been developed. Important among these has been the introduction of improvements in primary melting practices, designed to control important impurities. This is of decisive importance because even traces of certain impurity elements present in grain boundaries in high temperature materials can seriously affect properties. Impurities are deleterious and need to be removed. However, in certain cases, (e.g., creep fracture) controlled impurity additions can be beneficial and result in improved properties

Genetics of resistance to stored grain weevil (Sitophilus oryzae L. in maize

Directory of Open Access Journals (Sweden)

Rajkumar Zunjare

2015-12-01

Full Text Available Stored grain weevil (Sitophilus oryzae has emerged as important storage grain pest of maize, causing substantial economic losses. Owing to high costs and environmental hazards of pesticides, host plant resistance holds promise for effective control of weevils. In the present study, a set of experimental maize hybrids generated using line × tester mating design were evaluated against S. oryzae. Significant variation for grain weight loss (GWL (6.0–49.1%, number of insect progeny emerged (NIP (17.8–203.3, grain hardness (GH (263.1–495.4 N, and pericarp thickness (PT (60.3–161.0 μm was observed. Strong positive association was observed between GWL and NIP. GH and PT did not show any correlation with GWL and NIP. Additive and non-additive gene actions were important for both GWL and NIP. Promising inbreds and experimental crosses identified can be effectively utilized in the resistance breeding programme. In majority of promising crosses having desirable SCA effects, one of the parents had desirable GCA effects, indicating that selection of inbred parents based on per se performance for generating resistant crosses may be possible. The commercial hybrid checks were highly susceptible compared to experimental hybrids. The inbreds and experimental hybrids identified hold promise in developing weevil resistant maize cultivars offering sustainable solution to management of weevils in maize.

Competitive grain growth in directional solidification investigated by phase field simulation

International Nuclear Information System (INIS)

Li Junjie; Wang Zhijun; Wang Jincheng; Yang Yujuan

2012-01-01

During directional solidification, the competitive dendritic growth between various oriented grains is a key factor to obtain desirable texture. In order to understand the mechanism of competitive dendritic growth, the phase field method was adopted to simulate the microstructure evolution of bicrystal samples. The simulation has well reproduced the whole competitive growth process for both diverging and converging dendrites. In converging case, besides the block of the unfavorably oriented dendrite by the favorably oriented one, the unfavorably oriented dendrite is also able to overgrow the favorable one under the condition of relatively low pulling velocity. This unusual overgrowth is dictated by the solute interaction of the converging dendrite tips. In diverging case, it was found that the grain boundary can be either inclined or parallel to the favorably oriented grain depending on the disposition of two grains.

A Comparison of Maternal Outcomes from an Alcohol, Tobacco, and Other Drug Prevention Program for Mothers Choosing an Intervention versus Being Randomized

Science.gov (United States)

Byrnes, Hilary F.; Miller, Brenda A.; Laborde, Nicole

2013-01-01

Self-determination theory and substantial research findings suggest that more desirable outcomes may occur when participants are able to choose their prevention or treatment interventions, as having a choice may lead to greater motivation and feelings of self-efficacy. The present study examined the influence of having a choice of family-based…

Coarse-graining using the relative entropy and simplex-based optimization methods in VOTCA

Science.gov (United States)

Rühle, Victor; Jochum, Mara; Koschke, Konstantin; Aluru, N. R.; Kremer, Kurt; Mashayak, S. Y.; Junghans, Christoph

2014-03-01

Coarse-grained (CG) simulations are an important tool to investigate systems on larger time and length scales. Several methods for systematic coarse-graining were developed, varying in complexity and the property of interest. Thus, the question arises which method best suits a specific class of system and desired application. The Versatile Object-oriented Toolkit for Coarse-graining Applications (VOTCA) provides a uniform platform for coarse-graining methods and allows for their direct comparison. We present recent advances of VOTCA, namely the implementation of the relative entropy method and downhill simplex optimization for coarse-graining. The methods are illustrated by coarse-graining SPC/E bulk water and a water-methanol mixture. Both CG models reproduce the pair distributions accurately. SYM is supported by AFOSR under grant 11157642 and by NSF under grant 1264282. CJ was supported in part by the NSF PHY11-25915 at KITP. K. Koschke acknowledges funding by the Nestle Research Center.

Choosing to Participate: Revised Edition

Science.gov (United States)

Goldstein, Phyllis; Strom, Adam

2009-01-01

"Choosing to Participate" focuses on civic choices--the decisions people make about themselves and others in their community, nation, and world. The choices people make, both large and small, may not seem important at the time, but little by little they shape them as individuals and responsible global citizens. "Choosing to…

Choosing Beauty

NARCIS (Netherlands)

Friederich, Simon

2017-01-01

Reasoning that takes into account self-locating evidence in apparently plausible ways sometimes yields the startling conclusion that rational credences are such as if agents had bizarre causal powers. The present paper introduces a novel version of the Sleeping Beauty problem-Choosing Beauty-for

The best motivator priorities parents choose via analytical hierarchy process

Science.gov (United States)

Farah, R. N.; Latha, P.

2015-05-01

Motivation is probably the most important factor that educators can target in order to improve learning. Numerous cross-disciplinary theories have been postulated to explain motivation. While each of these theories has some truth, no single theory seems to adequately explain all human motivation. The fact is that human beings in general and pupils in particular are complex creatures with complex needs and desires. In this paper, Analytic Hierarchy Process (AHP) has been proposed as an emerging solution to move towards too large, dynamic and complex real world multi-criteria decision making problems in selecting the most suitable motivator when choosing school for their children. Data were analyzed using SPSS 17.0 ("Statistical Package for Social Science") software. Statistic testing used are descriptive and inferential statistic. Descriptive statistic used to identify respondent pupils and parents demographic factors. The statistical testing used to determine the pupils and parents highest motivator priorities and parents' best priorities using AHP to determine the criteria chosen by parents such as school principals, teachers, pupils and parents. The moderating factors are selected schools based on "Standard Kualiti Pendidikan Malaysia" (SKPM) in Ampang. Inferential statistics such as One-way ANOVA used to get the significant and data used to calculate the weightage of AHP. School principals is found to be the best motivator for parents in choosing school for their pupils followed by teachers, parents and pupils.

An evolutionarily conserved gene, FUWA, plays a role in determining panicle architecture, grain shape and grain weight in rice.

Science.gov (United States)

Chen, Jun; Gao, He; Zheng, Xiao-Ming; Jin, Mingna; Weng, Jian-Feng; Ma, Jin; Ren, Yulong; Zhou, Kunneng; Wang, Qi; Wang, Jie; Wang, Jiu-Lin; Zhang, Xin; Cheng, Zhijun; Wu, Chuanyin; Wang, Haiyang; Wan, Jian-Min

2015-08-01

Plant breeding relies on creation of novel allelic combinations for desired traits. Identification and utilization of beneficial alleles, rare alleles and evolutionarily conserved genes in the germplasm (referred to as 'hidden' genes) provide an effective approach to achieve this goal. Here we show that a chemically induced null mutation in an evolutionarily conserved gene, FUWA, alters multiple important agronomic traits in rice, including panicle architecture, grain shape and grain weight. FUWA encodes an NHL domain-containing protein, with preferential expression in the root meristem, shoot apical meristem and inflorescences, where it restricts excessive cell division. Sequence analysis revealed that FUWA has undergone a bottleneck effect, and become fixed in landraces and modern cultivars during domestication and breeding. We further confirm a highly conserved role of FUWA homologs in determining panicle architecture and grain development in rice, maize and sorghum through genetic transformation. Strikingly, knockdown of the FUWA transcription level by RNA interference results in an erect panicle and increased grain size in both indica and japonica genetic backgrounds. This study illustrates an approach to create new germplasm with improved agronomic traits for crop breeding by tapping into evolutionary conserved genes. © 2015 The Authors The Plant Journal © 2015 John Wiley & Sons Ltd.

Trace, isotopic analysis of micron-sized grains -- Mo, Zr analysis of stardust (SiC and graphite grains).

Energy Technology Data Exchange (ETDEWEB)

Pellin, M. J.; Nicolussi, G. K.

1998-02-19

Secondary Neutral Mass Spectrometry using resonant laser ionization can provide for both high useful yields and high discrimination while maintaining high lateral and depth resolutions. An example of the power of the method is measurement of the isotopic composition of Mo and Zr in 1-5 {micro}m presolar SiC and graphite grains isolated from the Murchison CM2 meteorite for the first time. These grains have survived the formation of the Solar System and isotopic analysis reveals a record of the stellar nucleosynthesis present during their formation. Mo and Zr, though present at less than 10 ppm in some grains, are particularly useful in that among their isotopes are members that can only be formed by distinct nucleosynthetic processes known as s-, p-, and r-process. Successful isotopic analysis of these elements requires both high selectivity (since these are trace elements) and high efficiency (since the total number of atoms available are limited). Resonant Ionization Spectroscopy is particularly useful and flexible in this application. While the sensitivity of this t.edmique has often been reported in the past, we focus hereon the very low noise properties of the technique. We further demonstrate the efficacy of noise removal by two complimentary methods. First we use the resonant nature of the signal to subtract background signal. Second we demonstrate that by choosing the appropriate resonance scheme background can often be dramatically reduced.

The Role of Overconfidence in Romantic Desirability and Competition.

Science.gov (United States)

Murphy, Sean C; von Hippel, William; Dubbs, Shelli L; Angilletta, Michael J; Wilson, Robbie S; Trivers, Robert; Barlow, Fiona Kate

2015-08-01

Four studies and a computer simulation tested the hypothesis that people who are overconfident in their self-assessments may be more successful in attracting mates. In Study 1, overconfident people were perceived as more confident in their dating profiles, and this perceived confidence predicted increased romantic desirability. Study 2 revealed that overconfident people also tend to be perceived as arrogant, which counteracts the positive effects of perceived confidence. However, Study 3 revealed that overconfidence might confer an advantage in intrasexual competition, as people were less likely to compete with overconfident individuals by virtue of their perceived confidence and arrogance. Study 4 showed that overconfident raters were also more likely to choose to compete for romantic partners. In Study 5, agent-based modeling incorporating the coefficients from these studies suggested that overconfidence facilitates mate acquisition in the presence of intrasexual competition. © 2015 by the Society for Personality and Social Psychology, Inc.

Grain refinement of Aluminium alloys using friction stir processing

International Nuclear Information System (INIS)

Khraisheh, M.

2004-01-01

Full text.Friction Stir Processing (FSP) is a new advanced material processing technique used to refine and homogenize the microstructure of sheet metals. FSP is a solid state processing technique that uses a rapidly rotating non-consumable high strength tool steel pin that extends from a cylindrical shoulder. The rotating pin is forced with a predetermined load into the work piece and moved along with the work pieces, while the rotating pin deforms and stirs the locally heated material. It is a hot working process in which a large amount of deformation is imparted to the sheet. FS processed zone is characterized by dynamic recrystallization which results in grain refinement . this promising emerging process needs further investigations to develop optimum process parameters to produce the desired microstructure. In this work, we present preliminary results on the effects of rotational and translational speeds on grain refinement of AA5052. Under certain processing conditions, sub-micron grain structure was produced using this technique

Improving 6061-Al Grain Growth and Penetration across HIP-Bonded Clad Interfaces in Monolithic Fuel Plates: Initial Studies

Energy Technology Data Exchange (ETDEWEB)

Hackenberg, Robert E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); McCabe, Rodney J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Montalvo, Joel D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Clarke, Kester D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dvornak, Matthew J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Edwards, Randall L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Crapps, Justin M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Trujillo, R. Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Aikin, Beverly [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Vargas, Victor D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hollis, Kendall J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Lienert, Thomas J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Forsyth, Robert T. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Harada, Kiichi L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2013-05-06

Grain penetration across aluminum-aluminum cladding interfaces in research reactor fuel plates is desirable and was obtained by a legacy roll-bonding process, which attained 20-80% grain penetration. Significant grain penetration in monolithic fuel plates produced by Hot Isostatic Press (HIP) fabrication processing is equally desirable but has yet to be attained. The goal of this study was to modify the 6061-Al in such a way as to promote a much greater extent of crossinterface grain penetration in monolithic fuel plates fabricated by the HIP process. This study documents the outcomes of several strategies attempted to attain this goal. The grain response was characterized using light optical microscopy (LOM) electron backscatter diffraction (EBSD) as a function of these prospective process modifications done to the aluminum prior to the HIP cycle. The strategies included (1) adding macroscopic gaps in the sandwiches to enhance Al flow, (2) adding engineering asperities to enhance Al flow, (3) adding stored energy (cold work), and (4) alternative cleaning and coating. Additionally, two aqueous cleaning methods were compared as baseline control conditions. The results of the preliminary scoping studies in all the categories are presented. In general, none of these approaches were able to obtain >10% grain penetration. Recommended future work includes further development of macroscopic grooving, transferred-arc cleaning, and combinations of these with one another and with other processes.

On locating a semi-desirable facility on the continuous plane

DEFF Research Database (Denmark)

Brimberg, Jack; Juel, Henrik

1998-01-01

Euclidean distance from the facility to the closest customer. The objective is to generate the set of efficient points, from which the decision maker must choose the preferred one. Two reformulations are considered: in one, the sum of weighted distances is minimized, subject to constraints requiring...... that each customer must have a weighted Euclidean distance to the facility of at least a given parameter; varying the parameter yields the efficient set. In the other, both criteria are viewed as minimization problems and a convex combination of them is minimized. Properties of the reformulations are given......The paper considers a bicriteria model for locating a semi-desirable facility on the plane. One criterion is that of minimizing the sum of weighted distances between customers and facility, where distances are given by an arbitrary norm. The other criterion is that of maximizing the weighted...

Characterization of pomegranate juice and whey based novel beverage fermented by kefir grains.

Science.gov (United States)

Sabokbar, Nayereh; Khodaiyan, Faramarz

2015-06-01

Mixture of pomegranate juice and whey was evaluated as a potential substrate for production of a novel probiotic beverage by kefir grains. Different fermentation conditions were used as viz: two fermentation temperature (19 ºC and 25 ºC) and two levels of kefir grains inoculum (5 % and 8%w/v). pH, acidity, lactose consumption as well as organic acids formation were determined during 32 hours of fermentation. Results showed that kefir grains were able to utilize lactose and decrease pH, increase acidity, produce lactic acid and acetic acid, while the level of citric acid decreased. It was observed these change depended on temperature and level of kefir grains with the highest changes at the temperature of 25 ºC and kefir grains inoculum of 8%w/v. Pomegranate juice and whey mixture therefore may serve as a suitable substrate for the production of novel probiotic dairy-fruit juice beverage by kefir grains and the sensory characteristics of this beverage were shown desirable results.

Whole grain intake, determined by dietary records and plasma alkylresorcinol concentrations, is low among pregnant women in Singapore.

Science.gov (United States)

Ross, Alastair B; Colega, Marjorelee T; Lim, Ai Lin; Silva-Zolezzi, Irma; Macé, Katherine; Saw, Seang Mei; Kwek, Kenneth; Gluckman, Peter; Godfrey, Keith M; Chong, Yap-Seng; Chong, Mary F F

2015-01-01

To quantify whole grain intake in pregnant women in Singapore in order to provide the first detailed analysis of whole grain intake in an Asian country and in pregnant women. Analysis of 24-h diet recalls in a cross-sectional cohort study and analysis of a biomarker of whole grain intake (plasma alkylresorcinols) in a subset of subjects. The Growing Up in Singapore Towards healthy Outcomes-mother offspring cohort study based in Singapore. 998 pregnant mothers with complete 24-h recalls taken during their 26-28th week of gestation. Plasma samples from a randomly select subset of 100 subjects were analysed for plasma alkylresorcinols. Median (IQR) whole grain intake for the cohort and the 30% who reported eating whole grains were 0 (IQR 0, 9) and 23.6 (IQR 14.6, 44.2) g/day respectively. Plasma alkylresorcinol concentrations were very low [median (IQR)=9 (3, 15) nmol/L], suggesting low intake of whole grain wheat in this population. Plasma alkylresorcinols were correlated with whole grain wheat intake (Spearman's r=0.35; pSingapore was well below the 2-3 (60-95 g) servings of whole grains per day recommended by the Singapore Health Promotion Board. Efforts to increase whole grain intake should be supported to encourage people to choose whole grains over refined grains in their diet.

Secondary recrystallization in non-sag W filament wires -- On the possible role of relative grain boundary character distribution

International Nuclear Information System (INIS)

Samajdar, I.; Watte, P.; Mertens, F.

1999-01-01

Non-Sag tungsten (W) wire is indispensable for the lighting industry. For the necessary creep resistance, large elongated grains are considered as the desired microstructure. These large grains are obtained by primary and secondary recrystallization. In the present study an effort has been made to characterize and to understand the origin of such large elongated grains. In secondary recrystallization, often called abnormal grain growth, a few of the grains grow massive. The mechanisms of normal and abnormal grain growth are essentially the same, involving high angle boundary migration and driven by the reduction of surface energy. The abnormal grain growth can be visualized as a growth advantage for a few of the grains or growth disadvantage for the majority. Such an advantage/disadvantage may be caused by (1) differences in grain size and/or (2) differences in grain boundary character distribution (GBCD). In other words, a grain may grow massive if it has large size and/or possibilities of more favorable (i.e., of higher mobility) grain boundaries with the matrix grains

Complex Estimation of Strength Properties of Functional Materials on the Basis of the Analysis of Grain-Phase Structure Parameters

OpenAIRE

Gitman, M.B.; Klyuev, A.V.; Stolbov, V.Y.; Gitman, I.M.

2017-01-01

The technique allows analysis using grain-phase structure of the functional material to evaluate its performance, particularly strength properties. The technique is based on the use of linguistic variable in the process of comprehensive evaluation. An example of estimating the strength properties of steel reinforcement, subject to special heat treatment to obtain the desired grain-phase structure.

In vitro dialyzability of essential minerals from white and whole grain pasta.

Science.gov (United States)

Vignola, María Belén; Bustos, Mariela Cecilia; Pérez, Gabriela Teresa

2018-11-01

The aim of the present investigation was to study the in vitro mineral dialyzability of pasta made with white and whole-grain flours obtained from two genotypes (Klein Guerrero and Baguette Premium 11) with different mineral contents. Pasta samples were made from white flour (FP), and whole grain flour from cyclonic mill (WFAP) and blade mill (WFBP). Mineral content and in vitro digestion were determined on all samples to study starch variation and mineral dialyzability. Whole-grain pasta contained significantly higher amounts of minerals than FP, since bran and embryo are richer in minerals than endosperm. In addition to the low content of mineral composition observed in FP, the dialyzability of some minerals (Cu, Fe, Mg and Zn) was higher than whole-grain pasta even when the percentage of starch hydrolyzed after intestinal digestion was higher than FP. These results can also be useful for developing wheat-based products rich in the desired minerals. Copyright © 2018 Elsevier Ltd. All rights reserved.

Influence of orientation mismatch on charge transport across grain boundaries in tri-isopropylsilylethynyl (TIPS) pentacene thin films.

Science.gov (United States)

Steiner, Florian; Poelking, Carl; Niedzialek, Dorota; Andrienko, Denis; Nelson, Jenny

2017-05-03

We present a multi-scale model for charge transport across grain boundaries in molecular electronic materials that incorporates packing disorder, electrostatic and polarisation effects. We choose quasi two-dimensional films of tri-isopropylsilylethynyl pentacene (TIPS-P) as a model system representative of technologically relevant crystalline organic semiconductors. We use atomistic molecular dynamics, with a force-field specific for TIPS-P, to generate and equilibrate polycrystalline two-dimensional thin films. The energy landscape is obtained by calculating contributions from electrostatic interactions and polarization. The variation in these contributions leads to energetic barriers between grains. Subsequently, charge transport is simulated using a kinetic Monte-Carlo algorithm. Two-grain systems with varied mutual orientation are studied. We find relatively little effect of long grain boundaries due to the presence of low impedance pathways. However, effects could be more pronounced for systems with limited inter-grain contact areas. Furthermore, we present a lattice model to generalize the model for small molecular systems. In the general case, depending on molecular architecture and packing, grain boundaries can result in interfacial energy barriers, traps or a combination of both with qualitatively different effects on charge transport.

Generational differences in factors influencing physicians to choose a work location.

Science.gov (United States)

Mathews, M; Seguin, M; Chowdhury, N; Card, R T

2012-01-01

Canadian medical schools have increased enrolment and recruited more rural students in an effort to address general and rural physician shortages. The success of this approach depends on the recruitment of these newly trained physicians to under-serviced areas. Studies from North America suggest that the career expectations and practice patterns of younger, more recently graduated physicians differ from those of their older counterparts. This study explored the factors that influenced the work location choices of physicians of differing generations, who trained at universities in Saskatchewan, and Newfoundland and Labrador, two Canadian provinces with large rural populations and no community larger than 235 000 population. Semi-structured, qualitative interviews were conducted with physicians who graduated from either the Memorial University of Newfoundland or the University of Saskatchewan. Generation definitions were based on the graduation year. Early-career physicians graduated between 1995 and 1999; mid-career physician graduated between 1985 and 1989; late-career physicians graduated between 1975 and 1979; and end-career physicians graduated between 1965 and 1969. Each physician was asked questions about the number and nature of work location changes over the course of their careers and the factors related to their decision to choose each location. Interview transcripts and notes were analyzed using a thematic analysis approach. Although the study focus was on generational differences, similarities and differences between universities, sexes and specialties (family physicians/GPs vs specialists) were also examined. Recruitment to the provinces was focused on as a whole, because the largest communities in the provinces are small compared with most urban communities. Forty-eight physicians were interviewed, five to nine physicians who graduated in each decade and from each university. The desire to be near family and friends was cited as the primary

Topology of sustainable management in dynamical Earth system models with desirable states

Science.gov (United States)

Heitzig, J.; Kittel, T.

2015-03-01

To keep the Earth system in a desirable region of its state space, such as the recently suggested "tolerable environment and development window", "planetary boundaries", or "safe (and just) operating space", one not only needs to understand the quantitative internal dynamics of the system and the available options for influencing it (management), but also the structure of the system's state space with regard to certain qualitative differences. Important questions are: which state space regions can be reached from which others with or without leaving the desirable region? Which regions are in a variety of senses "safe" to stay in when management options might break away, and which qualitative decision problems may occur as a consequence of this topological structure? In this article, as a complement to the existing literature on optimal control which is more focussed on quantitative optimization and is much applied in both the engineering and the integrated assessment literature, we develop a mathematical theory of the qualitative topology of the state space of a dynamical system with management options and desirable states. We suggest a certain terminology for the various resulting regions of the state space and perform a detailed formal classification of the possible states with respect to the possibility of avoiding or leaving the undesired region. Our results indicate that before performing some form of quantitative optimization, the sustainable management of the Earth system may require decisions of a more discrete type that come in the form of several dilemmata, e.g., choosing between eventual safety and uninterrupted desirability, or between uninterrupted safety and increasing flexibility. We illustrate the concepts and dilemmata with conceptual models from classical mechanics, climate science, ecology, economics, and coevolutionary Earth system modelling and discuss their potential relevance for the climate and sustainability debate.

Systematic and simulation-free coarse graining of homopolymer melts: A structure-based study

International Nuclear Information System (INIS)

Yang, Delian; Wang, Qiang

2015-01-01

We propose a systematic and simulation-free strategy for coarse graining of homopolymer melts, where each chain of N m monomers is uniformly divided into N segments, with the spatial position of each segment corresponding to the center-of-mass of its monomers. We use integral-equation theories suitable for the study of equilibrium properties of polymers, instead of many-chain molecular simulations, to obtain the structural and thermodynamic properties of both original and coarse-grained (CG) systems, and quantitatively examine how the effective pair potentials between CG segments and the thermodynamic properties of CG systems vary with N. Our systematic and simulation-free strategy is much faster than those using many-chain simulations, thus effectively solving the transferability problem in coarse graining, and provides the quantitative basis for choosing the appropriate N-values. It also avoids the problems caused by finite-size effects and statistical uncertainties in many-chain simulations. Taking the simple hard-core Gaussian thread model [K. S. Schweizer and J. G. Curro, Chem. Phys. 149, 105 (1990)] as the original system, we demonstrate our strategy applied to structure-based coarse graining, which is quite general and versatile, and compare in detail the various integral-equation theories and closures for coarse graining. Our numerical results show that the effective CG potentials for various N and closures can be collapsed approximately onto the same curve, and that structure-based coarse graining cannot give thermodynamic consistency between original and CG systems at any N < N m

Synthetic Aperture Focusing Technique in Ultrasonic Inspection of Coarse Grained Materials

Energy Technology Data Exchange (ETDEWEB)

Stepinski, Tadeusz (Uppsala Univ., Signals and Systems, Box 528, SE-751 20 Uppsala (Sweden))

2007-12-15

Experience from the ultrasonic inspection of nuclear power plants has shown that large focused transducers are relatively effective in suppressing grain (structure) noise. Operation of a large focused transducer can be thought of as an integration (coherent summation) of individual beams reflected from the target and received by individual points at the transducer surface. Synthetic aperture focusing technique (SAFT), in its simplest version mimics an acoustic lens used for focusing beams at a desired point in the region of interest. Thus, SAFT should be able to suppress the grain noise in the similar way as the focused transducer does. This report presents the results of investigation of SAFT algorithms applied for post-processing of ultrasonic data acquired in inspection of coarse grained metals. The performance of SAFT in terms of its spatial (cross-range) resolution and grain noise suppression is studied. The evaluation is made based on the experimental data obtained from the ultrasonic inspection of test specimens with artificial defects (side drilled holes). SAFT algorithms for both contact and immersion mode are introduced and experimentally verified

Repeated growth and bubbling transfer of graphene with millimetre-size single-crystal grains using platinum.

Science.gov (United States)

Gao, Libo; Ren, Wencai; Xu, Huilong; Jin, Li; Wang, Zhenxing; Ma, Teng; Ma, Lai-Peng; Zhang, Zhiyong; Fu, Qiang; Peng, Lian-Mao; Bao, Xinhe; Cheng, Hui-Ming

2012-02-28

Large single-crystal graphene is highly desired and important for the applications of graphene in electronics, as grain boundaries between graphene grains markedly degrade its quality and properties. Here we report the growth of millimetre-sized hexagonal single-crystal graphene and graphene films joined from such grains on Pt by ambient-pressure chemical vapour deposition. We report a bubbling method to transfer these single graphene grains and graphene films to arbitrary substrate, which is nondestructive not only to graphene, but also to the Pt substrates. The Pt substrates can be repeatedly used for graphene growth. The graphene shows high crystal quality with the reported lowest wrinkle height of 0.8 nm and a carrier mobility of greater than 7,100 cm(2) V(-1) s(-1) under ambient conditions. The repeatable growth of graphene with large single-crystal grains on Pt and its nondestructive transfer may enable various applications.

Studying of influence of fiber reinforcing at fine-grained concrete applying in transport construction

Science.gov (United States)

Begunov, Oleg; Alexandrova, Olga; Solovyov, Vadim

2017-10-01

We observed causes of using fiber in nowadays construction industry and its influence on a final product properties, where the fine-grained concrete basing of repairing dry construction mix was used as a base. However, in Russia we do not have such experience. If we’re talking about changes occurring in the fine-grained concrete all of its are known about it, either in concrete, but in dry-construction mixes changes may have another purpose. Advantages and disadvantages of using fiber were oblieved also in that article. The main subject of this research is the influence of fiber on a mechanical properties of fine-grained concrete. The most attention is paid to estimate the influence of a concrete’s properties by metal fibers: casting time (initial and final), workability and strength (tensile strength and compressive strength) in this article. The most popular different type of metal fiber compares for its length and width and the optimum quantity of metal component chooses, which will indicate the maximum possible affirmative result of its using. Dependences comparing properties of fine-grained properties with fiber’s type, measurements and quantity which show the evident result of researching are discussed.

[Strategies to choose scaffold materials for tissue engineering].

Science.gov (United States)

Gao, Qingdong; Zhu, Xulong; Xiang, Junxi; Lü, Yi; Li, Jianhui

2016-02-01

mixed with sustained-release nano-microsphere containing growth factors. What's more, the stent internal surface coated with glue/collagen matrix mixing layer containing bFGF and EGF so could supplying the early release of the two cytokines. Finally, combining the poly(L-lactic acid)/poly(ε-caprolactone) biliary stent with the induced cells was the last step for preparing tissue-engineered bile duct. This literature reviewed a variety of the existing tissue engineering scaffold materials and briefly introduced the impact factors on the characteristics of tissue engineering scaffold materials such as preparation procedure, surface modification of scaffold, and so on. We explored the choosing strategy of desired tissue engineering scaffold materials.

Choosing Wood Burning Appliances

Science.gov (United States)

Information to assist consumers in choosing a wood burning appliance, including types of appliances, the differences between certified and non-certified appliances, and alternative wood heating options.

Educational Vouchers: Freedom to Choose?

OpenAIRE

Reel, Jordan; Block, Walter E.

2013-01-01

Milton Friedman is famous for his book title: “Free to Choose.” He also favors educational vouchers, which denies the freedom to choose to people who do not wish to subsidize the education of other people’s children. Thus, he is guilty of a logical contradiction. Why is it important to assess whether Friedman’s views on educational vouchers are logically consistent with his widespread reputation as an advocate of free enterprise, and, thus, freedom to chose? It is important to assess all figu...

Fertility desires and fertility outcomes.

Science.gov (United States)

Bracher, M; Santow, G

1991-05-01

An Australian 1-in-1000 national probability sample conducted in 1986 yielded 2547 women aged 20-59 who provided detailed life histories on marital unions, childbearing, and contraception. Age specific fertility rates, desired family size, differentials in desired family size, desired fertility and achieved fertility, and sequential family building are examined. The results indicate that the desired family size at 1st marriage has declined only slightly over the past 30 years. 3 children are generally desired, and ver few desire 2. The constance of fertility desires in contrasted with the fertilitydecline to below replacement levels. Several reasons are suggested for the desired family size: the desire is for a family size within the family tradition and modified by the desire to have 1 of each sex, the desire reflects less on intentions but more on normative pressure to become a parent. Marrying is self selecting on the desire for a traditional family of at least 2 children. There is a rising age at marriage as well as a decline in marriages. Desired family size exceeds completed fertility. Period factors and personal circumstances affect fertility intentions. Future inquires should explore the multiple factors relating to fertility, rather than in comparing fertility desires and actual fertility. The data collected on age specific fertility were comparable to official estimates. The fertility decline was evidenced in all groups except teenagers. The decline was nearly 50% for those 20-24 years between the 1050's-80's, 33% for ages 25-29. Marriage patterns explain this decline in part. Between 1971-76, women aged 20-25 were married 37 months out of 60 months in 1971-76 versus 25 out of 60 months in 1981-86. Within the 25 year age group, marital fertility has declined and unmarried fertility, which is low, has risen, Women in a marital union of any kind has remained stable. Fertility within de facto unions, which is lower than within marriage, is higher than

The Criteria of Love: Trait Desirability of Filipino Youth on Mate Selection

Directory of Open Access Journals (Sweden)

Racidon P. Bernarte

2016-08-01

Full Text Available In choosing a life partner, making a ‘good match’ is what everyone hopes for. Usually we have the habit of thinking on how many potential mates are sitting around? And with that, how many would you be attracted and attached to, and how many person you’d probably never date? To find out the relevance of the claim, this quantitative study was designed to know the desirable traits being considered by the Filipino youth in selecting their potential mate, and how male and female differ in their preferences. A total of 400 Filipino university students with the age of 15 to 23 years old participated in the study through self-administered survey. General findings revealed that over the 6 trait dimensions: Physical Traits; Social Traits; Personality Traits; Skills; Achievements; and Spiritual Traits—male and female have significant difference in their trait preference in choosing their mate. Though there are traits that fall under the same degree of importance, women still have higher preference in mate selection criteria as compared to men in all traits. Overall, the trait preferences of the respondents were critically influenced by their sex. Nevertheless, this study clearly suggests the similarity that men and women put importance to traits which can help them develop and maintain an intimate and strong interpersonal relationship with their mate.

To Choose or Not to Choose Science

DEFF Research Database (Denmark)

Holmegaard, Henriette Tolstrup; Madsen, Lene Møller; Ulriksen, Lars

2014-01-01

In the literature, there is a general concern that a less number of students choose to study science, technology, engineering or mathematics (STEM). This paper presents results from a Danish longitudinal study which examines students’ choice of whether or not to continue studying STEM after upper......-secondary school. In particular, this study focuses on students who held an STEM subject as one of their favourite subjects at secondary educational level, but who chose not to study STEM at the tertiary level. This paper explores how students’ perceptions of STEM relate to their identity work. The data used...

Multifaceted Sexual Desire and Hormonal Associations: Accounting for Social Location, Relationship Status, and Desire Target.

Science.gov (United States)

Chadwick, Sara B; Burke, Shannon M; Goldey, Katherine L; van Anders, Sari M

2017-11-01

Sexual desire is typically measured as a unitary erotic phenomenon and is often assumed by biological and biomedical researchers, as well as the lay public, to be directly connected to physiological parameters like testosterone (T). In the present study, we empirically examined how conceptualizing sexual desire as multifaceted might clarify associations with T and contextual variables. To do so, we used the Sexual Desire Questionnaire (DESQ), which assesses multifaceted dyadic sexual desire, to explore how contextual variables such as social location, relationship status, and desire target (e.g., partner vs. stranger) might be meaningful for reports of sexual desire and associated hormonal correlations. We focused on women (N = 198), because sexual desire and testosterone are generally unlinked in healthy men. Participants imagined a partner or stranger while answering the 65 DESQ items and provided a saliva sample for hormone assay. Analyses showed that the DESQ factored differently for the current sample than in previous research, highlighting how sexual desire can be constructed differently across different populations. We also found that, for the Intimacy, Eroticism, and Partner Focus factors, mean scores were higher when the desire target was a partner relative to a stranger for participants in a relationship, but equally high between partner versus stranger target for single participants. DESQ items resolved into meaningful hormonal desire components, such that high endorsement of Fantasy Experience was linked to higher T, and higher cortisol was linked with lower endorsement of the Intimacy factor. We argue that conceptualizing desire as multifaceted and contextualized when assessing hormonal links-or questions in general about desire-can clarify some of its complexities and lead to new research avenues.

Effects of Temperature and Pressure of Hot Isostatic Pressing on the Grain Structure of Powder Metallurgy Superalloy.

Science.gov (United States)

Tan, Liming; He, Guoai; Liu, Feng; Li, Yunping; Jiang, Liang

2018-02-24

The microstructure with homogeneously distributed grains and less prior particle boundary (PPB) precipitates is always desired for powder metallurgy superalloys after hot isostatic pressing (HIPping). In this work, we studied the effects of HIPping parameters, temperature and pressure on the grain structure in PM superalloy FGH96, by means of scanning electron microscope (SEM), electron backscatter diffraction (EBSD), transmission electron microscope (TEM) and Time-of-flight secondary ion spectrometry (ToF-SIMS). It was found that temperature and pressure played different roles in controlling PPB precipitation and grain structure during HIPping, the tendency of grain coarsening under high temperature could be inhibited by increasing HIPping pressure which facilitates the recrystallization. In general, relatively high temperature and pressure of HIPping were preferred to obtain an as-HIPped superalloy FGH96 with diminished PPB precipitation and homogeneously refined grains.

Mesoscopic simulation of recrystallization and grain growth

International Nuclear Information System (INIS)

Rollett, A.D.

2000-01-01

A brief summary of simulation techniques for recrystallization and grain growth is given. The available methods include surface evolver, front tracking (including finite element methods and vertex methods), networks of curves, phase field, cellular automata, and Monte Carlo. Two of the models that use a regular lattice, the Potts model and the Cellular Automaton (CA) model, have proved to be very useful. Microstructure is represented on a discrete lattice where the value of the field at each point represents the local orientation of the material and boundaries exist between points of unlike orientation. Two issues are discussed: one is a hybrid approach to combining the standard Monte Carlo and cellular automata algorithms for recrystallization modeling. The second is adaptation of the MC method for modeling grain growth (and recrystallization) with physically based boundary properties. Both models have significant limitations in their standard forms. The CA model is very useful and efficient for simulating recrystallization with deterministic motion of the recrystallization fronts. It can be adapted to simulate curvature driven migration provided that multiple sub-lattices are used with a probabilistic switching rule. The Potts model is very successful in modeling curvature driven boundary migration and grain growth. It does not simulate the proportionality between boundary velocity and a stored energy driving force, however, unless rather restricted conditions of stored energy (in relation to the grain boundary energy) and lattice temperature are satisfied. A new approach based on a hybrid of the Potts model (MC) and the Cellular Automaton (CA) model has been developed to obtain the desired limiting behavior for both curvature-driven and stored energy-driven grain boundary migration. The combination of methods is achieved by interleaving the two different types of reorientation event in time. The results show that the hybrid algorithm models the Gibbs

READINESS OF SENIOR STUDENTS FROM THE CARPATHIAN TERRAIN TO CHOOSE TEACHING PROFESSION: PEDAGOGICAL AND PSYCHOLOGICAL ASPECTS

Directory of Open Access Journals (Sweden)

Tetyana Blyznyuk

2015-04-01

Full Text Available The article presented at the conference is the study of the problems of upbringing and education of senior pupils from the Carpathian mountain area. Namely the author investigates the students’ readiness for choosing the teaching profession and willingness to work at rural mountain schools. Despite the big number of teachers in the labor market of Ukraine, now the system of education meets an acute issue dealing with the selection to the pedagogical specialties talented creative young people who actually choose teaching profession by nature and strong personal will. Today there are very few teachers whose level of commitment to perform professional duties in Ukrainian education is really high, and this is especially true about mountain school teachers. This phenomenon can be partially explained by the fact that teaching profession has low prestige in our society for the recent decades (Ukrainian teachers are not well-paid, their working conditions in rural Carpathian schools leave much to be desired. Therefore the problem of readiness of high school students to perform professional-pedagogical duties is of particular relevance. The author analyzes the psychological and pedagogical basis of the presented problem, defines the essence and structure of the notion “readiness for choosing the teaching profession”. In the context of solving this issue one of the important conditions the author considers the comprehensive development of senior school students, particularly the development of their creative abilities.

Assessment of Sexual Desire for Clinical Trials of Women With Hypoactive Sexual Desire Disorder: Measures, Desire-Related Behavior, and Assessment of Clinical Significance.

Science.gov (United States)

Pyke, Robert E; Clayton, Anita H

2018-01-19

The Female Sexual Function Index-desire subscale is the standard measure for clinical trials of hypoactive sexual desire disorder (HSDD), but lacks items assessing sexually related behaviors and attitudes toward partner. Counting satisfying sexual events is criticized, but sexual behavior remains important. Mean treatment differences cannot define clinical significance; responder and remitter analyses help. We reviewed measures on sexual desire and sexual behavior relevant to HSDD, and how to assess clinical significance. We conducted a literature review of measures of sexual desire comparing expert-proposed criteria for dysfunctional desire, expert-developed scales, and scales from patient input. Commonly recognized symptoms of HSDD were identified. Results of HSDD trials and scale validation studies were evaluated to extract responder and remitter values. The utility of distribution-based measures of responders and remitters was assessed. Symptom relevance was evaluated as the proportion of symptom sets that included the item; responder and remitter cut points were determined by distribution-based methods. 12 Validated rating scales, 5 scales primarily derived from expert recommendations and 7 scales initially from patient input, and 5 sets of diagnostic criteria for conditions like HSDD were compared. Content varied highly between scales despite compliance with U.S. Food and Drug Administration recommendations for patient-reported outcomes. This disunity favors an expert-recommended scale such as the Elements of Desire Questionnaire with each of the common items, plus a measure of frequency of sexual activity, eg, item in the Patient Reported Outcomes Measurement Information System. Registrational drug trials, but not psychological treatment trials, usually give responder/remitter analyses, using dichotomized global impressions or anchor-based definitions. Distribution-based methods are more uniformly applicable to define responder and remitter status. The

Sexual Desire in Sexual Minority and Majority Women and Men: The Multifaceted Sexual Desire Questionnaire.

Science.gov (United States)

Chadwick, Sara B; Burke, Shannon M; Goldey, Katherine L; Bell, Sarah N; van Anders, Sari M

2017-11-01

Sexual desire is increasingly understood to be multifaceted and not solely erotically oriented, but measures are still generally unitary and eroticism-focused. Our goals in this article were to explore the multifaceted nature of sexual desire and develop a measure to do so, and to determine how multifaceted sexual desire might be related to gender/sex and sexual orientation/identity. In the development phase, we generated items to form the 65-item Sexual Desire Questionnaire (DESQ). Next, the DESQ was administered to 609 women, 705 men, and 39 non-binary identified participants. Results showed that the DESQ demonstrated high reliability and validity, and that sexual desire was neither unitary nor entirely erotic, but instead was remarkably multifaceted. We also found that multifaceted sexual desire was in part related to social location variables such as gender/sex and sexual orientation/identity. We propose the DESQ as a measure of multifaceted sexual desire that can be used to compare factor themes, total scores, and scores across individual items in diverse groups that take social context into account. Results are discussed in light of how social location variables should be considered when making generalizations about sexual desire, and how conceptualizations of desire as multifaceted may provide important insights.

Evaluation of fat grains in gothaj sausage using image analysis

Directory of Open Access Journals (Sweden)

Ludmila Luňáková

2016-12-01

Full Text Available Fat is an irreplacable ingredient in the production of sausages and it determines the appearance of the resulting cut to a significant extent. When shopping, consumers choose a traditional product mostly according to its appearance, based onwhat they are used to. Chemical analysis is capable to determine the total fat content in the product, but it cannot accurately describe the shape and size of fat grains which the consumer observes when looking at the product. The size of fat grains considered acceptable by consumers can be determined using sensory analysis or image analysis. In recent years, image analysis has become widely used when examining meat and meat products. Compared to the human eye, image analysis using a computer system is highly effective, since a correctly adjusted computer program is able to evaluate results with lower error rate. The most commonly monitored parameter in meat products is the aforementioned fat. The fat is located in the cut surface of the product in the form of dispersed particles which can be fairly reliably identified based on color differences in the individual parts of the product matrix. The size of the fat grains depends on the input raw material used as well as on the production technology. The present article describes the application of image analysis when evaluating fat grains in the appearance of cut of the Gothaj sausage whose sensory requirements are set by Czech legislation, namely by Decree No. 326/2001 Coll., as amended. The paper evaluates the size of fat mosaic grains in Gothaj sausages from different manufacturers. Fat grains were divided into ten size classes according to various size limits; specifically, 0.25, 0.5, 0.75, 1.0, 1.5, 2.0, 2.5, 5.0, 8.0 and over 8 mm. The upper limit of up to 8 mm in diameter was chosen based on the limit for the size of individual fat grains set by the legislation. This upper limit was not exceeded by any of the products. On the other side the mosaic had the

From Sexual Desire Discrepancies to Desirable Sex: Creating the Optimal Connection.

Science.gov (United States)

Kleinplatz, Peggy J; Paradis, Nicolas; Charest, Maxime; Lawless, Shannon; Neufeld, Marlene; Neufeld, Robert; Pratt, Danielle; Ménard, A Dana; Buduru, Bogdan; Rosen, Lianne

2017-11-21

Beginning in 2005, our team conducted a series of studies on optimal sexual experiences. We have applied our findings to develop a group therapy intervention for couples presenting with low sexual desire/frequency and sexual desire discrepancy. The goal was to improve the quality of erotic intimacy by focusing on such elements as being fully embodied during sex, increasing authenticity, trustworthiness, and vulnerability. Twenty-eight heterosexual individuals (14 couples) were seen in 16 hours of couples group therapy. Each completed the New Sexual Satisfaction Scale in pretests, posttests and six-month follow-ups. Significant differences in satisfaction (p creating just enough safety to enable couples to take erotic risks and thereby create desirable sexual intimacy.

Dependence of corrosion properties of AISI 304L stainless steel on the austenite grain size

Energy Technology Data Exchange (ETDEWEB)

Sabooni, Soheil; Rashtchi, Hamed; Eslami, Abdoulmajid; Karimzadeh, Fathallah; Enayati, Mohammad Hossein; Raeissi, Keyvan; Imani, Reihane Faghih [Isfahan Univ. of Technology, Isfahan (Iran, Islamic Republic of). Dept. of Materials Engineering; Ngan, Alfonso Hing Wan [The Univ. of Hong Kong (China). Dept. of Mechanical Engineering

2017-07-15

The corrosion resistance of austenitic stainless steels is known to be hampered by the loss of chromium available for passive surface layer formation as a result of chromium carbide precipitation at austenite grain boundaries during annealing treatments. Although high-temperature annealing can promote carbide dissolution leading to better corrosion resistance, grain coarsening also results, which would lead to poorer mechanical properties. Processing methods to achieve both good corrosion resistance and mechanical properties are thus highly desirable for austenitic stainless steels. In the present study, we show that the corrosion resistance of AISI 304L stainless steel can be improved by grain refinement into the ultrafine-grained regime. Specifically, samples with different austenite grain sizes in the range of 0.65-12 μm were studied by potentiodynamic polarization and electrochemical impedance spectroscopy tests in a 3.5 wt.% NaCl solution. All samples showed a typical passive behavior with similar corrosion potential, but the corrosion current density decreased significantly with decreasing grain size. The results show that the sample with the finest grain size had the best corrosion resistance due to a higher resistance of the passive layer to pitting attacks. This study indicates that grain refinement which improves mechanical properties can also significantly improve the corrosion resistance of AISI 304L stainless steel.

Hypoactive Sexual Desire Disorder

DEFF Research Database (Denmark)

Goldstein, Irwin; Kim, Noel N.; Clayton, Anita H

2017-01-01

The objective of the International Society for the Study of Women's Sexual Health expert consensus panel was to develop a concise, clinically relevant, evidence-based review of the epidemiology, physiology, pathogenesis, diagnosis, and treatment of hypoactive sexual desire disorder (HSDD), a sexual...... dysfunction affecting approximately 10% of adult women. Etiologic factors include conditions or drugs that decrease brain dopamine, melanocortin, oxytocin, and norepinephrine levels and augment brain serotonin, endocannabinoid, prolactin, and opioid levels. Symptoms include lack or loss of motivation...... to participate in sexual activity due to absent or decreased spontaneous desire, sexual desire in response to erotic cues or stimulation, or ability to maintain desire or interest through sexual activity for at least 6 months, with accompanying distress. Treatment follows a biopsychosocial model and is guided...

CHEMICAL COMPOSITION OF WHOLE GRAINS IN COMMON BEANS LANDRACES AND BREEDING GENOTYPES

Directory of Open Access Journals (Sweden)

Gilberto Antonio Peripolli Bevilaqua

2015-04-01

Full Text Available The common bean has been object of breeding programs aiming the development of new cultivars adapted to varied production system and shown differentiated nutritional characteristics. Due a genetic diversity existent the landraces can be used directly for cropping, for present characteristics desirable. Little information exists about mineral content and other quality traits for those bean landraces. The aim of this paper was to verify the variability for grain nutricional caracters in breeding cultivars and landraces of bean from Rio Grande do Sul state, Brazil. The experiment was conducted in 2009/2010 in Experimental Station Cascata, of Embrapa Temperate Agriculture. In whole grain of 54 bean genotypes with black and no black coat were determined macroelements (nitrogen, phosphorus, potash, calcium, magnesium and sulfur, oligoelements (iron, manganese, zinc and cuprum, protein and ash content, insoluble fiber, digestive nutrient and antioxidant astragalina. The results shown that the landraces varieties presents nutritional composition of macro and oligoelements, fibers, protein and ash contents in whole grain similar than that of breeding lines and cultivars. The black coat grain from breeding programs showed better nutritional quality for macro and oligoelements content than coloured grain, highlighting TB 02-04 e TB 01-01. The landraces with coloured grains TB 02-26, TB 02-24 and TB 03-13 showed the high levels of astragaline.

Transport properties through graphene grain boundaries: strain effects versus lattice symmetry

Science.gov (United States)

Hung Nguyen, V.; Hoang, Trinh X.; Dollfus, P.; Charlier, J.-C.

2016-06-01

As most materials available at the macroscopic scale, graphene samples usually appear in a polycrystalline form and thus contain grain boundaries. In the present work, the effect of uniaxial strain on the electronic transport properties through graphene grain boundaries is investigated using atomistic simulations. A systematic picture of transport properties with respect to the strain and lattice symmetry of graphene domains on both sides of the boundary is provided. In particular, it is shown that strain engineering can be used to open a finite transport gap in all graphene systems where the two domains are arranged in different orientations. This gap value is found to depend on the strain magnitude, on the strain direction and on the lattice symmetry of graphene domains. By choosing appropriately the strain direction, a large transport gap of a few hundred meV can be achieved when applying a small strain of only a few percents. For a specific class of graphene grain boundary systems, strain engineering can also be used to reduce the scattering on defects and thus to significantly enhance the conductance. With a large strain-induced gap, these graphene heterostructures are proposed to be promising candidates for highly sensitive strain sensors, flexible electronic devices and p-n junctions with non-linear I-V characteristics.

Control of insects and mites in grain using a high temperature/short time (HTST) technique.

Science.gov (United States)

Mourier; Poulsen

2000-07-01

Wheat infested with grain mites (Acari) and Sitophilus granarius, and maize infested with Prostephanus truncatus, were exposed to hot air in a CIMBRIA HTST Microline toaster((R)). Inlet temperatures of the hot air were in the range of 150-750 degrees C decreasing to outlet temperatures in the range of 100-300 degrees C during the exposure period. A rotating drum, connected to a natural-gas burner was fed with grain which was in constant movement along the drum and thereby mixed thoroughly during the process. The capacity of the toaster was 1000 kg per hour.Complete control of grain mites and adult S. granarius in wheat was obtained with an inlet temperature of 300-350 degrees C and an average residence time in the drum of 6 s. More than 99% mortality was obtained for all stages of S. granarius with an inlet temperature of 300-350 degrees C and an average exposure period of 40 s. For control of P. truncatus in maize, an inlet temperature of 700 degrees C resulted in a complete disinfestation when the exposure time was 19 s.The reduction in grain moisture content was 0.5-1% at treatments giving 100% control. Germination tests indicate that it is possible to choose a combination of inlet temperatures and exposure periods which effectively kills mites and insects in small grains, without harming the functional properties of the grain.Economy of the method was considered to be competitive with fumigation using phosphine.

Film grain synthesis and its application to re-graining

Science.gov (United States)

Schallauer, Peter; Mörzinger, Roland

2006-01-01

Digital film restoration and special effects compositing require more and more automatic procedures for movie regraining. Missing or inhomogeneous grain decreases perceived quality. For the purpose of grain synthesis an existing texture synthesis algorithm has been evaluated and optimized. We show that this algorithm can produce synthetic grain which is perceptually similar to a given grain template, which has high spatial and temporal variation and which can be applied to multi-spectral images. Furthermore a re-grain application framework is proposed, which synthesises based on an input grain template artificial grain and composites this together with the original image content. Due to its modular approach this framework supports manual as well as automatic re-graining applications. Two example applications are presented, one for re-graining an entire movie and one for fully automatic re-graining of image regions produced by restoration algorithms. Low computational cost of the proposed algorithms allows application in industrial grade software.

Dust grain charging in a wake of other grains

International Nuclear Information System (INIS)

Miloch, W. J.; Block, D.

2012-01-01

The charging of dust grain in the wake of another grains in sonic and supersonic collisionless plasma flows is studied by numerical simulations. We consider two grains aligned with the flow, as well as dust chains and multiple grain arrangements. It is found that the dust charge depends significantly on the flow speed, distance between the grains, and the grain arrangement. For two and three grains aligned, the charges on downstream grains depend linearly on the flow velocity and intergrain distance. The simulations are carried out with DiP3D, a three dimensional particle-in-cell code with both electrons and ions represented as numerical particles [W. J. Miloch et al., Phys. Plasmas 17, 103703 (2010)].

Genetic dissection of grain traits in Yamadanishiki, an excellent sake-brewing rice cultivar.

Science.gov (United States)

Okada, Satoshi; Suehiro, Miki; Ebana, Kaworu; Hori, Kiyosumi; Onogi, Akio; Iwata, Hiroyoshi; Yamasaki, Masanori

2017-12-01

The grain traits of Yamadanishiki, an excellent sake-brewing rice cultivar in Japan, are governed by multiple QTLs, namely, a total of 42 QTLs including six major QTLs. Japanese rice wine (sake) is produced using brewing rice (Oryza sativa L.) that carries traits desirable for sake-brewing, such as a larger grain size and higher white-core expression rate (WCE) compared to cooking rice cultivars. However, the genetic basis for these traits in brewing rice cultivars is still unclear. We performed analyses of quantitative trait locus (QTL) of grain and days to heading over 3 years on populations derived from crosses between Koshihikari, a cooking rice, and Yamadanishiki, an excellent sake-brewing rice. A total of 42 QTLs were detected for the grain traits, and the Yamadanishiki alleles at 16 QTLs contributed to larger grain size. Two major QTLs essential for regulating both 100-grain weight (GWt) and grain width (GWh) were harbored in the same regions on chromosomes 5 and 10. An interaction was noted between the environment and the QTL associated with WCE on chromosome 6, which was detected in two of 3 years. In addition, two QTLs for WCE on chromosomes 3 and 10 overlapped with the QTLs for GWt and GWh, suggesting that QTLs associated with grain size also play an important role in the formation of white-core. Despite differences in the rate of grain growth in both Koshihikari and Yamadanishiki across 2 years, the WCE in Yamadanishiki remained consistent, thus demonstrating that the formation of white-core does not depend on grain filling speed. These data can be informative for programs involved in breeding better cooking and brewing rice cultivars.

The problem of social desirability bias when measuring desire for adolescent pregnancy.

Science.gov (United States)

Payne, Beth A

2018-06-07

Accurate reporting of pregnancy desire is instrumental to develop programs that meet the needs of adolescents and can ensure their right to safety and support during their development into adulthood. In the paper by Estrada et al. the authors present much needed data on pregnancy desire in Latin America through secondary analysis of the UNICEF Multiple Indicator Cluster Surveys (https://mics.unicef.org/surveys). In this study the authors found that pregnancy desire varied significantly by region, ranging from 38% in Panama to 79% in Cuba. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

The suicidal desire of Tolstoy.

Science.gov (United States)

Pridmore, Saxby; Pridmore, William

2011-06-01

To explore whether a healthy, successful individual may experience suicidal desires. Examination of "A Confession" by Leo Tolstoy. Confirmation that a physically and mentally healthy, well resourced individual may experience suicidal desires. To reduce suicide rates, a broader understanding of the factors which contribute to suicidal desires is required.

What Makes Women Experience Desire?

NARCIS (Netherlands)

Laan, Ellen; Both, Stephanie

2008-01-01

What makes women experience sexual desire? According to Kaplan, normal sexual response starts with desire, progresses through excitement or arousal, and ends with orgasm (Kaplan, 1974). This model implies that sexual desire is something you either have or don't have, and, if you don't have it, there

Grain-filling duration and grain yield relationships in wheat mutants

International Nuclear Information System (INIS)

Larik, A.S.

1987-01-01

Nine stable mutants of bread wheat along with their mother cultivars were investigated for grain-filling characteristics in relation to grain yield. Significant differences among mutants for grain-filling duration and grain-filling index were observed. Inspite of the consistent differences in grain-filling duration there was no significant association between grain-filling duration and grain yield in C-591 and Nayab mutants. Failure to detect an yield advantage due to differences in grain-filling duration in these genotypes suggests that any advantage derived from alteration of grain-filling period may have been outweighed by the coincident changes in length of the vegetative period. Other factors such as synchrony of anthesis may have limited out ability to find an association between grainfilling duration and grain yield. On the contrary, significant association between grain-filling duration and grain yield displayed by indus-66 indus-66 mutants derived from gamma rays, shows the ability of gamma rays to induce functional alternations in the pattern of gene arrangements controlling these traits. Thus, the vaability observed in these physiological traits suggests that selection for these traits could be useful in improving grain yield. (author)

Digging up Classroom Dollars on DonorsChoose

Science.gov (United States)

Curriculum Review, 2006

2006-01-01

Back in 2000, Charles Best was teaching at Wings Academy, an alternative high school in the Bronx, when he got the idea for a Web site where teachers could solicit donations for class projects. With help from his students, DonorsChoose.org soon was born. Last year, the site won Amazon.com's Nonprofit Innovation Award. So far, DonorsChoose has…

Giant grains

International Nuclear Information System (INIS)

Leitch-Devlin, M.A.; Millar, T.J.; Williams, D.A.

1976-01-01

Infrared observations of the Orion nebula have been interpreted by Rowan-Robinson (1975) to imply the existence of 'giant' grains, radius approximately 10 -2 cm, throughout a volume about a parsec in diameter. Although Rowan-Robinson's model of the nebula has been criticized and the presence of such grains in Orion is disputed, the proposition is accepted, that they exist, and in this paper situations in which giant grains could arise are examined. It is found that, while a giant-grain component to the interstellar grain density may exist, it is difficult to understand how giant grains arise to the extent apparently required by the Orion nebula model. (Auth.)

Large modulation of carrier transport by grain-boundary molecular packing and microstructure in organic thin films

KAUST Repository

Rivnay, Jonathan

2009-11-08

Solution-processable organic semiconductors are central to developing viable printed electronics, and performance comparable to that of amorphous silicon has been reported for films grown from soluble semiconductors. However, the seemingly desirable formation of large crystalline domains introduces grain boundaries, resulting in substantial device-to-device performance variations. Indeed, for films where the grain-boundary structure is random, a few unfavourable grain boundaries may dominate device performance. Here we isolate the effects of molecular-level structure at grain boundaries by engineering the microstructure of the high-performance n-type perylenediimide semiconductor PDI8-CN 2 and analyse their consequences for charge transport. A combination of advanced X-ray scattering, first-principles computation and transistor characterization applied to PDI8-CN 2 films reveals that grain-boundary orientation modulates carrier mobility by approximately two orders of magnitude. For PDI8-CN 2 we show that the molecular packing motif (that is, herringbone versus slip-stacked) plays a decisive part in grain-boundary-induced transport anisotropy. The results of this study provide important guidelines for designing device-optimized molecular semiconductors. © 2009 Macmillan Publishers Limited. All rights reserved.

Hearing Aids: How to Choose the Right One

Science.gov (United States)

Hearing aids: How to choose the right one Many types of hearing aids exist. So which is best for you? Find out what to consider when choosing a hearing ... used to the device and decide if it's right for you. Have the dispenser put in writing ...

The Customer Cannot Choose

NARCIS (Netherlands)

A.C.D. Donkers (Bas)

2013-01-01

textabstractPeople can choose and they make many choices each and every day. However, most people are unaware of how strong their environment influences the choices they make. In his inaugural address, Bas Donkers highlights the impact of what people see (and what they don’t see), what people

«Desire is everything». Desires, dreams, obsessions of collectors and antiquarians

Directory of Open Access Journals (Sweden)

Beatrice Laghezza

2013-06-01

Full Text Available The aim of this essay is to intersect the figures of the collector and the antiquarian with the dynamics of desire, and identify the possible connections between the three themes. Therefore, a thematic and comparative approach was chosen, while the sample text were drawn from the Italian literature of the late nineteenth and twentieth centuries. The textual analysis will reveal the various desires moving collectors and antiquarians in search of the items that make up their collections: greed, pathological need of wealth, fantasies of martyrdom, love, ambition to excel, dreams of omnipotence, libido, jealousy, Illusion of immortality, attraction to the perverse, flâneuristic curiosity. But at the top of this list there is undoubtedly the desire to listen to literature’s description of life.

Beta-Tin Grain Formation in Aluminum-Modified Lead-Free Solder Alloys

Science.gov (United States)

Reeve, Kathlene N.; Handwerker, Carol A.

2018-01-01

The limited number of independent β-Sn grain orientations that typically form during solidification of Sn-based solders and the resulting large β-Sn grain size have major effects on overall solder performance and reliability. This study analyzes whether additions of Al to Sn-Cu and Sn-Cu-Ag alloys can be used to change the grain size, morphology, and twinning structures of atomized (as-solidified) and re-melted (reflowed) β-Sn dendrites as determined using scanning electron microscopy and electron backscatter diffraction for as-solidified and reflow cycled (20-250°C, 1-5 cycles) Sn-Cu-Al and Sn-Ag-Cu-Al drip atomized spheres (260 μm diameter). The resulting microstructures were compared to as-solidified and reflow cycled Sn-Ag-Cu spheres (450 μm diameter) as well as as-solidified Sn-Ag-Cu, Sn-Cu, and Sn-Ag microstructures from the literature. Previous literature observations reporting reductions in undercooling and β-Sn grain size with Al micro-alloying additions could not be correlated to the presence of the Cu9Al4 phase or Al solute. The as-solidified spheres displayed no change in β-Sn dendrite structure or grain size when compared to non-Al-modified alloys, and the reflow cycled spheres produced high undercoolings (22-64°C), indicating a lack of potent nucleation sites. The current findings highlighted the role of Ag in the formation of the interlaced twinning structure and demonstrated that with deliberate compositional choices, formation of the alloy's β-Sn grain structure (cyclical twinning versus interlaced twinning) could be influenced, in both the as-solidified and reflow cycled states, though still not producing the fine-grain sizes and multiple orientations desired for improved thermomechanical properties.

Carpel size, grain filling, and morphology determine individual grain weight in wheat.

Science.gov (United States)

Xie, Quan; Mayes, Sean; Sparkes, Debbie L

2015-11-01

Individual grain weight is a major yield component in wheat. To provide a comprehensive understanding of grain weight determination, the carpel size at anthesis, grain dry matter accumulation, grain water uptake and loss, grain morphological expansion, and final grain weight at different positions within spikelets were investigated in a recombinant inbred line mapping population of bread wheat (Triticum aestivum L.)×spelt (Triticum spelta L.). Carpel size, grain dry matter and water accumulation, and grain dimensions interacted strongly with each other. Furthermore, larger carpels, a faster grain filling rate, earlier and longer grain filling, more grain water, faster grain water absorption and loss rates, and larger grain dimensions were associated with higher grain weight. Frequent quantitative trait locus (QTL) coincidences between these traits were observed, particularly those on chromosomes 2A, 3B, 4A, 5A, 5DL, and 7B, each of which harboured 16-49 QTLs associated with >12 traits. Analysis of the allelic effects of coincident QTLs confirmed their physiological relationships, indicating that the complex but orderly grain filling processes result mainly from pleiotropy or the tight linkages of functionally related genes. After grain filling, distal grains within spikelets were smaller than basal grains, primarily due to later grain filling and a slower initial grain filling rate, followed by synchronous maturation among different grains. Distal grain weight was improved by increased assimilate availability from anthesis. These findings provide deeper insight into grain weight determination in wheat, and the high level of QTL coincidences allows simultaneous improvement of multiple grain filling traits in breeding. © The Author 2015. Published by Oxford University Press on behalf of the Society for Experimental Biology.

Grain Refinement and High-Performance of Equal-Channel Angular Pressed Cu-Mg Alloy for Electrical Contact Wire

Directory of Open Access Journals (Sweden)

Aibin Ma

2014-12-01

Full Text Available Multi-pass equal-channel angular pressing (EACP was applied to produce ultrafine-grained (UFG Cu-0.2wt%Mg alloy contact wire with high mechanical/electric performance, aim to overcome the catenary barrier of high-speed trains by maximizing the tension and improving the power delivery. Microstructure evolution and overall properties of the Cu-Mg alloy after different severe-plastic-deformation (SPD routes were investigated by microscopic observation, tensile and electric tests. The results show that the Cu-Mg alloy after multi-pass ECAP at 473 K obtains ultrafine grains, higher strength and desired conductivity. More passes of ECAP leads to finer grains and higher strength, but increasing ECAP temperature significantly lower the strength increment of the UFG alloy. Grain refinement via continuous SPD processing can endow the Cu-Mg alloy superior strength and good conductivity characteristics, which are advantageous to high-speed electrification railway systems.

Choosing and Using Images in Environmental Science Education

Science.gov (United States)

Muthersbaugh, Debbie Smick

2012-01-01

Although using images for teaching has been a common practice in science classrooms (Gordon & Pea, 1995) understanding the purpose or how to choose images has not typically been intentional. For this dissertation three separate studies relating to choosing and using images are prepared with environmental science in mind. Each of the studies…

Ethics and choosing appropriate means to an end: Problems with coal mine and nuclear workplace safety

Energy Technology Data Exchange (ETDEWEB)

Shrader-Frechette, K.; Cooke, R. [University of Notre Dame, Notre Dame, IN (USA). Dept. of Biological Science

2004-02-01

A common problem in ethics is that people often desire an end but fail to take the means necessary to achieve it. Employers and employees may desire the safety end mandated by performance standards for pollution control, but they may fail to employ the means, specification standards, necessary to achieve this end. This article argues that current (de jure) performance standards, for lowering employee exposures to ionizing radiation, fail to promote de facto worker welfare, in part because employers and employees do not follow the necessary means (practices known as specification standards) to achieve the end (performance standards) of workplace safety. To support this conclusion, the article argues that (1) safety requires attention to specification, as well as performance, standards; (2) coal-mine specification standards may fail to promote performance standards; (3) nuclear workplace standards may do the same; (4) choosing appropriate means to the end of safety requires attention to the ways uncertainties and variations in exposure may mask violations of standards; and (5) correcting regulatory inattention to differences between de jute and de facto is necessary for achievement of ethical goals for safety.

Prevalence of IgE antibodies to grain and grain dust in grain elevator workers.

Science.gov (United States)

Lewis, D M; Romeo, P A; Olenchock, S A

1986-01-01

IgE-mediated allergic reactions have been postulated to contribute to respiratory reactions seen in workers exposed to grain dusts. In an attempt better to define the prevalence of IgE antibodies in workers exposed to grain dusts, we performed the radioallergosorbent test (RAST) on worker sera using both commercial allergens prepared from grain and worksite allergens prepared from grain dust samples collected at the worksite. We found that the two types of reagents identified different populations with respect to the specificity of IgE antibodies present. The RAST assay performed using worksite allergens correlated well with skin test procedures. These results may allow us to gain better understanding of allergy associated with grain dust exposure, and document the utility of the RAST assay in assessment of occupational allergies. PMID:3709478

Prevalence of IgE antibodies to grain and grain dust in grain elevator workers

Energy Technology Data Exchange (ETDEWEB)

Lewis, D.M.; Romeo, P.A.; Olenchock, S.A.

1986-04-01

IgE-mediated allergic reactions have been postulated to contribute to respiratory reactions seen in workers exposed to grain dusts. In an attempt better to define the prevalence of IgE antibodies in workers exposed to grain dusts, we performed the radioallergosorbent test (RAST) on worker sera using both commercial allergens prepared from grain and worksite allergens prepared from grain dust samples collected at the worksite. We found that the two types of reagents identified different populations with respect to the specificity of IgE antibodies present. The RAST assay performed using worksite allergens correlated well with skin test procedures. These results may allow us to gain better understanding of allergy associated with grain dust exposure, and document the utility of the RAST assay in assessment of occupational allergies.

Prevalence of IgE antibodies to grain and grain dust in grain elevator workers

International Nuclear Information System (INIS)

Lewis, D.M.; Romeo, P.A.; Olenchock, S.A.

1986-01-01

IgE-mediated allergic reactions have been postulated to contribute to respiratory reactions seen in workers exposed to grain dusts. In an attempt better to define the prevalence of IgE antibodies in workers exposed to grain dusts, we performed the radioallergosorbent test (RAST) on worker sera using both commercial allergens prepared from grain and worksite allergens prepared from grain dust samples collected at the worksite. We found that the two types of reagents identified different populations with respect to the specificity of IgE antibodies present. The RAST assay performed using worksite allergens correlated well with skin test procedures. These results may allow us to gain better understanding of allergy associated with grain dust exposure, and document the utility of the RAST assay in assessment of occupational allergies

Trigerred desire – new look at hypoactive sexual desire disorder among women

OpenAIRE

Iniewicz, Grzegorz; Strzelczak, Anna

2013-01-01

This article aims to present controversy surrounding current desire disorder criteria listed in DSM IV. Developed by Masters and Jonhson in 1996, completed later by Kaplan in 1974, the human sexual response cycle which is the basis for contemporary desire disorder criteria, in some aspects stands in opposition to the results of the newest research. This paper presents evidence to change the DSM criteria suggested by Basson and analyzes recent proposals for DSM V criteria for consideration of ...

Extraction methods of Amaranthus sp. grain oil isolation.

Science.gov (United States)

Krulj, Jelena; Brlek, Tea; Pezo, Lato; Brkljača, Jovana; Popović, Sanja; Zeković, Zoran; Bodroža Solarov, Marija

2016-08-01

Amaranthus sp. is a fast-growing crop with well-known beneficial nutritional values (rich in protein, fat, dietary fiber, ash, and minerals, especially calcium and sodium, and containing a higher amount of lysine than conventional cereals). Amaranthus sp. is an underexploited plant source of squalene, a compound of high importance in the food, cosmetic and pharmaceutical industries. This paper has examined the effects of the different extraction methods (Soxhlet, supercritical fluid and accelerated solvent extraction) on the oil and squalene yield of three genotypes of Amaranthus sp. grain. The highest yield of the extracted oil (78.1 g kg(-1) ) and squalene (4.7 g kg(-1) ) in grain was obtained by accelerated solvent extraction (ASE) in genotype 16. Post hoc Tukey's HSD test at 95% confidence limit showed significant differences between observed samples. Principal component analysis (PCA) and cluster analysis (CA) were used for assessing the effect of different genotypes and extraction methods on oil and squalene yield, and also the fatty acid composition profile. Using coupled PCA and CA of observed samples, possible directions for improving the quality of product can be realized. The results of this study indicate that it is very important to choose both the right genotype and the right method of extraction for optimal oil and squalene yield. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

Abnormal grain growth: a non-equilibrium thermodynamic model for multi-grain binary systems

International Nuclear Information System (INIS)

Svoboda, J; Fischer, F D

2014-01-01

Abnormal grain growth as the abrupt growth of a group of the largest grains in a multi-grain system is treated within the context of unequal retardation of grain growth due to the segregation of solute atoms from the bulk of the grains into the grain boundaries. During grain boundary migration, the segregated solute atoms are dragged under a small driving force or left behind the migrating grain boundary under a large driving force. Thus, the solute atoms in the grain boundaries of large grains, exhibiting a large driving force, can be released from the grain boundary. The mobility of these grain boundaries becomes significantly higher and abnormal grain growth is spontaneously provoked. The mean-field model presented here assumes that each grain is described by its grain radius and by its individual segregation parameter. The thermodynamic extremal principle is engaged to obtain explicit evolution equations for the radius and segregation parameter of each grain. Simulations of grain growth kinetics for various conditions of segregation with the same initial setting (100 000 grains with a given radius distribution) are presented. Depending on the diffusion coefficients of the solute in the grain boundaries, abnormal grain growth may be strongly or marginally pronounced. Solute segregation and drag can also significantly contribute to the stabilization of the grain structure. Qualitative agreement with several experimental results is reported. (paper)

A grain-boundary diffusion model of dynamic grain growth during superplastic deformation

International Nuclear Information System (INIS)

Kim, Byung-Nam; Hiraga, Keijiro; Sakka, Yoshio; Ahn, Byung-Wook

1999-01-01

Dynamic grain growth during superplastic deformation is modelled on the basis of a grain-boundary diffusion mechanism. On the grain boundary where a static and a dynamic potential difference coexist, matter transport along the boundary is assumed to contribute to dynamic grain growth through depositing the matter on the grain surface located opposite to the direction of grain-boundary migration. The amount of the diffusive matter during deformation is calculated for an aggregate of spherical grains and is converted to the increment of mean boundary migration velocity. The obtained relationship between the strain rate and the dynamic grain growth rate is shown to be independent of deformation mechanisms, provided that the grain growth is controlled by grain-boundary diffusion. The strain dependence, strain-rate dependence and temperature dependence of grain growth predicted from this model are consistent with those observed in superplastic ZrO 2 -dispersed Al 2 O 3

Pleasure/Desire, Sexularism and Sexuality Education

Science.gov (United States)

Rasmussen, Mary Louise

2012-01-01

Pleasure and desire have been important components of researchers' vision for sexuality education for over 20 years, a trend inspired by Michelle Fine's seminal paper, "Sexuality, Schooling, and Adolescent Females: The Missing Discourse of Desire." This essay considers how discourses related to pleasure and desire have been taken up in the USA and…

Validation of Scores on the Marlowe-Crowne Social Desirability Scale and the Balanced Inventory of Desirable Responding

Science.gov (United States)

Leite, Walter L.; Beretvas, S. Natasha

2005-01-01

The Marlowe-Crowne Social Desirability Scale (MCSDS), the most commonly used social desirability bias (SDB) assessment, conceptualizes SDB as an individual's need for approval. The Balanced Inventory of Desirable Responding (BIDR) measures SDB as two separate constructs: impression management and self-deception. Scores on SDB scales are commonly…

Carpel size, grain filling, and morphology determine individual grain weight in wheat

OpenAIRE

Xie, Quan; Mayes, Sean; Sparkes, Debbie L.

2015-01-01

Individual grain weight is a major yield component in wheat. To provide a comprehensive understanding of grain weight determination, the carpel size at anthesis, grain dry matter accumulation, grain water uptake and loss, grain morphological expansion, and final grain weight at different positions within spikelets were investigated in a recombinant inbred line mapping population of bread wheat (Triticum aestivum L.)?spelt (Triticum spelta L.). Carpel size, grain dry matter and water accumulat...

From Desires, Obligations and Norms to Goals

NARCIS (Netherlands)

Dignum, F.P.M.; Kinny, D.; Sonenberg, L.

2002-01-01

Traditional models of agents based on Beliefs, Desires and Intentions usually only include either desires or goals. Therefore the process whereby goals arise from desires is given scant attention. In this paper we argue that the inclusion of both desires and goals in the same model can be

Development and characterization of food-grade tracers for the global grain tracing and recall system.

Science.gov (United States)

Lee, Kyung-Min; Armstrong, Paul R; Thomasson, J Alex; Sui, Ruixiu; Casada, Mark; Herrman, Timothy J

2010-10-27

Tracing grain from the farm to its final processing destination as it moves through multiple grain-handling systems, storage bins, and bulk carriers presents numerous challenges to existing record-keeping systems. This study examines the suitability of coded caplets to trace grain, in particular, to evaluate methodology to test tracers' ability to withstand the rigors of a commercial grain handling and storage systems as defined by physical properties using measurement technology commonly applied to assess grain hardness and end-use properties. Three types of tracers to dispense into bulk grains for tracing the grain back to its field of origin were developed using three food-grade substances [processed sugar, pregelatinized starch, and silicified microcrystalline cellulose (SMCC)] as a major component in formulations. Due to a different functionality of formulations, the manufacturing process conditions varied for each tracer type, resulting in unique variations in surface roughness, weight, dimensions, and physical and spectroscopic properties before and after coating. The applied two types of coating [pregelatinized starch and hydroxypropylmethylcellulose (HPMC)] using an aqueous coating system containing appropriate plasticizers showed uniform coverage and clear coating. Coating appeared to act as a barrier against moisture penetration, to protect against mechanical damage of the surface of the tracers, and to improve the mechanical strength of tracers. The results of analysis of variance (ANOVA) tests showed the type of tracer, coating material, conditioning time, and a theoretical weight gain significantly influenced the morphological and physical properties of tracers. Optimization of these factors needs to be pursued to produce desirable tracers with consistent quality and performance when they flow with bulk grains throughout the grain marketing channels.

Value of freedom to choose encoded by the human brain

Science.gov (United States)

Fujiwara, Juri; Usui, Nobuo; Park, Soyoung Q.; Williams, Tony; Iijima, Toshio; Taira, Masato; Tsutsui, Ken-Ichiro

2013-01-01

Humans and animals value the opportunity to choose by preferring alternatives that offer more rather than fewer choices. This preference for choice may arise not only from an increased probability of obtaining preferred outcomes but also from the freedom it provides. We used human neuroimaging to investigate the neural basis of the preference for choice as well as for the items that could be chosen. In each trial, participants chose between two options, a monetary amount option and a “choice option.” The latter consisted of a number that corresponded to the number of everyday items participants would subsequently be able to choose from. We found that the opportunity to choose from a larger number of items was equivalent to greater amounts of money, indicating that participants valued having more choice; moreover, participants varied in the degree to which they valued having the opportunity to choose, with some valuing it more than the increased probability of obtaining preferred items. Neural activations in the mid striatum increased with the value of the opportunity to choose. The same region also coded the value of the items. Conversely, activation in the dorsolateral striatum was not related to the value of the items but was elevated when participants were offered more choices, particularly in those participants who overvalued the opportunity to choose. These data suggest a functional dissociation of value representations within the striatum, with general representations in mid striatum and specific representations of the value of freedom provided by the opportunity to choose in dorsolateral striatum. PMID:23864380

Grain dissection as a grain size reducing mechanism during ice microdynamics

Science.gov (United States)

Steinbach, Florian; Kuiper, Ernst N.; Eichler, Jan; Bons, Paul D.; Drury, Martin R.; Griera, Albert; Pennock, Gill M.; Weikusat, Ilka

2017-04-01

Ice sheets are valuable paleo-climate archives, but can lose their integrity by ice flow. An understanding of the microdynamic mechanisms controlling the flow of ice is essential when assessing climatic and environmental developments related to ice sheets and glaciers. For instance, the development of a consistent mechanistic grain size law would support larger scale ice flow models. Recent research made significant progress in numerically modelling deformation and recrystallisation mechanisms in the polycrystalline ice and ice-air aggregate (Llorens et al., 2016a,b; Steinbach et al., 2016). The numerical setup assumed grain size reduction is achieved by the progressive transformation of subgrain boundaries into new high angle grain boundaries splitting an existing grain. This mechanism is usually termed polygonisation. Analogue experiments suggested, that strain induced grain boundary migration can cause bulges to migrate through the whole of a grain separating one region of the grain from another (Jessell, 1986; Urai, 1987). This mechanism of grain dissection could provide an alternative grain size reducing mechanism, but has not yet been observed during ice microdynamics. In this contribution, we present results using an updated numerical approach allowing for grain dissection. The approach is based on coupling the full field theory crystal visco-plasticity code (VPFFT) of Lebensohn (2001) to the multi-process modelling platform Elle (Bons et al., 2008). VPFFT predicts the mechanical fields resulting from short strain increments, dynamic recrystallisation process are implemented in Elle. The novel approach includes improvements to allow for grain dissection, which was topologically impossible during earlier simulations. The simulations are supported by microstructural observations from NEEM (North Greenland Eemian Ice Drilling) ice core. Mappings of c-axis orientations using the automatic fabric analyser and full crystallographic orientations using electron

The Hide-and-Seek of Grain Boundaries from Moiré Pattern Fringe of Two-Dimensional Graphene

Science.gov (United States)

Kim, Jung Hwa; Kim, Kwanpyo; Lee, Zonghoon

2015-01-01

Grain boundaries (GBs) commonly exist in crystalline materials and affect various properties of materials. The facile identification of GBs is one of the significant requirements for systematical study of polycrystalline materials including recently emerging two-dimensional materials. Previous observations of GBs have been performed by various tools including high resolution transmission electron microscopy. However, a method to easily identify GBs, especially in the case of low-angle GBs, has not yet been well established. In this paper, we choose graphene bilayers with a GB as a model system and investigate the effects of interlayer rotations to the identification of GBs. We provide a critical condition between adjacent moiré fringe spacings, which determines the possibility of GB recognition. In addition, for monolayer graphene with a grain boundary, we demonstrate that low-angle GBs can be distinguished easily by inducing moiré patterns deliberately with an artificial reference overlay. PMID:26216628

Object of desire self-consciousness theory.

Science.gov (United States)

Bogaert, Anthony F; Brotto, Lori A

2014-01-01

In this article, the authors discuss the construct of object of desire self-consciousness, the perception that one is romantically and sexually desirable in another's eyes. The authors discuss the nature of the construct, variations in its expression, and how it may function as part of a self-schemata or script related to romance and sexuality. The authors suggest that object of desire self-consciousness may be an adaptive, evolved psychological mechanism allowing sexual and romantic tactics suitable to one's mate value. The authors also suggest that it can act as a signal that one has high mate value in the sexual marketplace. The authors then review literature (e.g., on fantasies, on sexual activity preferences, on sexual dysfunctions, on language) suggesting that object of desire self-consciousness plays a particularly important role in heterosexual women's sexual/romantic functioning and desires.

How to choose a delegation for a peace conference?

NARCIS (Netherlands)

Can, Burak; Csóka, Péter; Ergin, Emre

2017-01-01

This paper analyzes how to choose a delegation, a committee to represent a society such as in a peace conference. We propose normative conditions and seek optimal, consistent, neutral and non-manipulable ways to choose a delegation. We show that a novel class of threshold rules are characterized by

Grain-size sorting and slope failure in experimental subaqueous grain flows

NARCIS (Netherlands)

Kleinhans, M.G.; Asch, Th.W.J. van

2005-01-01

Grain-size sorting in subaqueous grain flows of a continuous range of grain sizes is studied experimentally with three mixtures. The observed pattern is a combination of stratification and gradual segregation. The stratification is caused by kinematic sieving in the grain flow. The segregation is

Tempeh: a mold-modified indigenous fermented food made from soybeans and/or cereal grains.

Science.gov (United States)

Hachmeister, K A; Fung, D Y

1993-01-01

A variety of indigenous fermented foods exist today; however, tempeh has been one of the most widely accepted and researched mold-modified fermented products. Tempeh is a traditional fermented food made from soaked and cooked soybeans inoculated with a mold, usually of the genus Rhizopus. After fermentation has occurred, the soybeans are bound together into a compact cake by dense cottony mycelium. An important function of the mold in the fermentation process is the synthesis of enzymes, which hydrolyze soybean constituents and contribute to the development of a desirable texture, flavor, and aroma of the product. Enzymatic hydrolysis also may decrease or eliminate antinutritional constituents; consequently, the nutritional quality of the fermented product may be improved. Current technology and new scientific advancements have enabled researchers to examine specific strains of Rhizopus and new substrates such as cereal grains. Because Kansas produces numerous cereal grains, production of a fermented tempeh-like product using wheat, sorghum (milo), oats, rye, barley, corn, and triticale is a definite possibility for generating a Kansas Value-Added Product. In this study, several different tempeh-like products were produced using various cereal grains inoculated with Rhizopus oligosporus NRRL 2549 or R. oligosporus NRRL 2710. Grains used included hard red winter wheat, triticale, yellow sorghum (milo), and red sorghum (milo). The grain source as well as the strain of R. oligosporus used influenced the product's appearance, flavor, and patty integrity. Results showed that R. oligosporus NRRL 2549 produced more mycelium at a more rapid rate than did the R. oligosporus NRRL 2710 strain. The combination of red sorghum and R. oligosporus NRRL 2549 yielded a product with good patty texture, aroma, and appearance. Furthermore, the red sorghum fermented product was well suited for slicing. On the other hand, yellow sorghum inoculated with either R. oligosporus NRRL 2549 or

Hypoactive sexual desire disorder.

Science.gov (United States)

Davison, Sonia L

2012-08-01

Hypoactive sexual desire disorder (HSDD) is the most prevalent female sexual dysfunction, with estimates of prevalence approximating 10%. By definition it is a deficiency of sexual desire that causes distress. HSDD has no single cause, but physiological, psychological and socio-cultural factors underpinning female sexual desire may all be important in its development. Medical therapeutic strategies to date have concentrated on modulation of hormone levels, particularly androgen administration, yet few products have been approved for the treatment of HSDD in developed countries. More recent medical targets have included agents with 5-hydroxytryptamine agonist activity. Psychological therapeutic approaches have been infrequently studied but concentrate on cognitive behavioural therapy. HSDD is an evolving diagnosis, the existence of which has been questioned by some critics. Whilst HSDD remains the subject of ongoing research, its title and definition are under debate as a new edition of the Diagnostic and Statistical Manual of the American Psychiatric Association approaches publication in 2012.

Development of a red TL detection system for a single grain of quartz

International Nuclear Information System (INIS)

Yawata, T.; Hashimoto, T.

2007-01-01

Red thermoluminescence (RTL) of natural quartz grains offers many desirable properties for quaternary chronology and archaeological dating, although RTL measurements suffer from high thermal background due to black-body radiation on heating. To reduce the thermal background to as low a level as possible, a silver sample disc covered with a biotite plate with a sample hole was used in combination with a light guide, cluster heater, optical filters, and photomultiplier tube cooling to -20 deg. C in the present system. As a result, the thermal background decreased from 2x10 4 to 1000 cps in the temperature range 350-380 deg. C, resulting in a detection limit of approximately 100 cps, corresponding to the RTL signal from a single quartz grain (250-500μm) irradiated with 4.0 Gy. In addition, application of lower heating rates retarded the thermal quenching effect, resulting in high RTL signals, which are preferable for young or insensitive quartz samples. Using RTL measurements with the single quartz grain method under optimal RTL conditions, comparison of equivalent doses from artificially irradiated single quartz grains to the known dose was within the 20% measurement error. Based on equivalent dose determinations for single quartz grains, large irregularities on non-etched quartz surfaces might be very detrimental to the TL detection process. This result confirms that surface etching treatment is required to achieve reliable dating with high counting efficiency

Theory and modeling of microstructural evolution in polycrystalline materials: Solute segregation, grain growth and phase transformations

Science.gov (United States)

Ma, Ning

2005-11-01

To accurately predict microstructure evolution and, hence, to synthesis metal and ceramic alloys with desirable properties involves many fundamental as well as practical issues. In the present study, novel theoretical and phase field approaches have been developed to address some of these issues including solute drag and segregation transition at grain boundaries and dislocations, grain growth in systems of anisotropic boundary properties, and precipitate microstructure development in polycrystalline materials. The segregation model has allowed for the prediction of a first-order segregation transition, which could be related to the sharp transition of solute concentration of grain boundary as a function of temperature. The incorporating of interfacial energy and mobility as functions of misorientation and inclination in the phase field model has allowed for the study of concurrent grain growth and texture evolution. The simulation results were analyzed using the concept of local grain boundary energy density, which simplified significantly the development of governing equations for texture controlled grain growth in Ti-6Al-4V. Quantitative phase field modeling techniques have been developed by incorporating thermodynamic and diffusivity databases. The models have been validated against DICTRA simulations in simple 1D problems and applied to simulate realistic microstructural evolutions in Ti-6Al-4V, including grain boundary a and globular a growth and sideplate development under both isothermal aging and continuous cooling conditions. The simulation predictions agree well with experimental observations.

Sexual Desire and Hypoactive Sexual Desire Disorder in Women. Introduction and Overview. Standard Operating Procedure (SOP Part 1)

DEFF Research Database (Denmark)

Bitzer, Johannes; Giraldi, Annamaria; Pfaus, Jim

2013-01-01

Introduction.  Hypoactive sexual desire disorder (HSDD) is defined in Diagnostic and Statistical Manual of Mental Disorders Fourth Edition as persistent or recurrent deficiency (or absence) of sexual fantasies/thoughts, and/or desire for or receptivity to sexual activity, which causes personal...... must be based on a biopsychosocial, multidimensional, and integrative perspective. Bitzer J, Giraldi A, and Pfaus J. Sexual desire and hypoactive sexual desire disorder in women. Introduction and overview. Standard operating procedure (SOP part 1). J Sex Med **;**:**-**....

Desired lifetime and end-of-life desires across adulthood from 20 to 90: a dual-source information model.

Science.gov (United States)

Lang, Frieder R; Baltes, Paul B; Wagner, Gert G

2007-09-01

How long do people want to live, and how does scientific research on aging affect such desires? A dual-source information model proposes that aging expectations and desires are informed differently by two sources: personal experiences on the one hand, and scientific and societal influences on the other. Two studies with independent German national samples explored desires regarding length of life and end of life among adults between the ages of 20 and 90. FINDINGS ARE: First, desired lifetime is consistent at around 85 years with few age differences. Second, experimental induction of good or bad news from research on aging has little effect in Study 1. Third, interest in science has moderating effects on desired lifetime in Study 2. Fourth, there is a high prevalence of a strong desire to control the "when and how" of one's death, although only 11% of the individuals completed a living will. Findings are consistent with the dual-source information model.

Guide to Choosing Stroke Rehabilitation Services

Science.gov (United States)

National Stroke Association’s Guide to Choosing Stroke Rehabilitation Services Rehabilitation, often referred to as rehab, is an important part of stroke recovery. Through rehab, you:  Re-learn basic skills such ...

A comparison of grain boundary evolution during grain growth in fcc metals

International Nuclear Information System (INIS)

Brons, J.G.; Thompson, G.B.

2013-01-01

Grain growth of Cu and Ni thin films, subjected to in situ annealing within a transmission electron microscope, has been quantified using a precession-enhanced electron diffraction technique. The orientation of each grain and its misorientation with respect to its neighboring grains were calculated. The Cu underwent grain growth that maintained a monomodal grain size distribution, with its low-angle grain boundaries being consumed, and the Ni exhibited grain size distributions in stages, from monomodal to bimodal to monomodal. The onset of Ni’s abnormal grain growth was accompanied by a sharp increase in the Σ3 and Σ9 boundary fractions, which is attributed to simulation predictions of their increased mobility. These Σ3 and Σ9 fractions then dropped to their room temperature values during the third stage of grain growth. In addition to the Σ3 and Σ9 boundaries, the Σ5 and Σ7 boundaries also underwent an increase in total boundary fraction with increasing temperature in both metals

Martensite phase reversion-induced nano/ ultrafine grained AISI 304L stainless steel with magnificent mechanical properties

Directory of Open Access Journals (Sweden)

Mohammad Shirdel

2015-06-01

Full Text Available Austenitic stainless steels are extensively used in various applications requiring good corrosion resistance and formability. In the current study, the formation of nano/ ultrafine grained austenitic microstructure in a microalloyed AISI 304L stainless steel was investigated by the advanced thermomechanical process of reversion of strain-induced martensite. For this purpose, samples were subjected to heavy cold rolling to produce a nearly complete martensitic structure. Subsequently, a wide range of annealing temperatures (600 to 800°C and times (1 to 240 min were employed to assess the reversion behavior and to find the best annealing condition for the production of the nano/ultrafine grained austenitic microstructure. Microstructural characterizations have been performed using X-ray diffraction (XRD, scanning electron microscopy (SEM, and magnetic measurement, whereas the mechanical properties were assessed by tensile and hardness tests. After thermomechanical treatment, a very fine austenitic structure was obtained, which was composed of nano sized grains of ~ 85 nm in an ultrafine grained matrix with an average grain size of 480 nm. This microstructure exhibited superior mechanical properties: high tensile strength of about 1280 MPa with a desirable elongation of about 41%, which can pave the way for the application of these sheets in the automotive industry.

Neural network classification technique and machine vision for bread crumb grain evaluation

Science.gov (United States)

Zayas, Inna Y.; Chung, O. K.; Caley, M.

1995-10-01

Bread crumb grain was studied to develop a model for pattern recognition of bread baked at Hard Winter Wheat Quality Laboratory (HWWQL), Grain Marketing and Production Research Center (GMPRC). Images of bread slices were acquired with a scanner in a 512 multiplied by 512 format. Subimages in the central part of the slices were evaluated by several features such as mean, determinant, eigen values, shape of a slice and other crumb features. Derived features were used to describe slices and loaves. Neural network programs of MATLAB package were used for data analysis. Learning vector quantization method and multivariate discriminant analysis were applied to bread slices from what of different sources. A training and test sets of different bread crumb texture classes were obtained. The ranking of subimages was well correlated with visual judgement. The performance of different models on slice recognition rate was studied to choose the best model. The recognition of classes created according to human judgement with image features was low. Recognition of arbitrarily created classes, according to porosity patterns, with several feature patterns was approximately 90%. Correlation coefficient was approximately 0.7 between slice shape features and loaf volume.

Skilled nursing and rehabilitation facilities - choosing

Science.gov (United States)

... gov/ency/patientinstructions/000436.htm Choosing a skilled nursing and rehabilitation facility To use the sharing features ... M. is also a founding member of Hi-Ethics and subscribes to the principles of the Health ...

How to choose a health plan

Science.gov (United States)

... patientinstructions/000861.htm How to choose a health plan To use the sharing features on this page, ... paperwork for tax purposes. How to Compare Health Plans Employers and government sites, such as the Marketplace , ...

Experimental Investigations of the Physical and Optical Properties of Individual Micron/Submicron-Size Dust Grains in Astrophysical Environments

Science.gov (United States)

Abbas, M. M.; Tankosic, D.; LeClair, A.

2014-01-01

Dust grains constitute a significant component of matter in the universe, and play an important and crucial role in the formation and evolution of the stellar/planetary systems in interstellar dust clouds. Knowledge of physical and optical properties of dust grains is required for understanding of a variety of processes in astrophysical and planetary environments. The currently available and generally employed data on the properties of dust grains is based on bulk materials, with analytical models employed to deduce the corresponding values for individual small micron/submicron-size dust grains. However, it has been well-recognized over a long period, that the properties of individual smallsize dust grains may be very different from those deduced from bulk materials. This has been validated by a series of experimental investigations carried out over the last few years, on a laboratory facility based on an Electrodynamic Balance at NASA, which permits levitation of single small-size dust grains of desired composition and size, in vacuum, in simulated space environments. In this paper, we present a brief review of the results of a series of selected investigations carried out on the analogs of interstellar and planetary dust grains, as well as dust grains obtained by Apollo-l1-17 lunar missions. The selected investigations, with analytical results and discussions, include: (a) Direct measurements of radiation on individual dust grains (b) Rotation and alignments of dust grains by radiative torque (c) Charging properties of dust grains by: (i) UV Photo-electric emissions (ii) Electron Impact. The results from these experiments are examined in the light of the current theories of the processes involved.

Mechanism of secondary recrystallization of Goss grains in grain-oriented electrical steel

Science.gov (United States)

Hayakawa, Yasuyuki

2017-12-01

Since its invention by Goss in 1934, grain-oriented (GO) electrical steel has been widely used as a core material in transformers. GO exhibits a grain size of over several millimeters attained by secondary recrystallization during high-temperature final batch annealing. In addition to the unusually large grain size, the crystal direction in the rolling direction is aligned with , which is the easy magnetization axis of α-iron. Secondary recrystallization is the phenomenon in which a certain very small number of {110} (Goss) grains grow selectively (about one in 106 primary grains) at the expense of many other primary recrystallized grains. The question of why the Goss orientation is exclusively selected during secondary recrystallization has long been a main research subject in this field. The general criterion for secondary recrystallization is a small and uniform primary grain size, which is achieved through the inhibition of normal grain growth by fine precipitates called inhibitors. This paper describes several conceivable mechanisms of secondary recrystallization of Goss grains mainly based on the selective growth model.

Response of Barley Double Haploid Lines to the Grain Yield and Morphological Traits under Water Deficit Stress Conditions

Directory of Open Access Journals (Sweden)

Maroof Khalily

2017-04-01

Full Text Available To study the relationships of grain yield and some of agro-morphological traits in 40 doubled haploid (DH lines along with parental and three check genotypes in a randomized complete block design with two replications under two water regimes (normal and stress were evaluated during 2011-2012 and 2012-2013 growing seasons. Combined analysis of variance showed significant difference for all the traits in terms of the year, water regimes, lines, and and line × year. Comparison of group means, between non-stress and stress conditions, showed that DH lines had the lowest reduction percentage for the number of grains per spike, thousand grain weight, grain yield and biological yield as opposed to check genotypes. The correlation between grain yield with biological yield, harvest index, thousand grain weight, and hectoliter of kernel weight in both conditions, were highly significant and positive. Based on stepwise regression the peduncle length, number of seeds per spike, thousand seed weight, and hectoliter of kernel weight had important effect on increasing seed yield. The result of path analysis showed that these traits had the highest direct effect on grain yield. Based on mean comparisons of morphological characters as well as STI and GMP indices it can be concluded that lines No.11, 13, 14, 24, 29, 30, 35 and 39 were distinguished to be desirable lines for grain yield and their related traits and also tolerant lines in terms of response to drought stress conditions.

Consumer preference not to choose: Methodological and policy implications

International Nuclear Information System (INIS)

Brennan, Timothy J.

2007-01-01

Residential consumers remain reluctant to choose new electricity suppliers. Even the most successful jurisdictions, four US states and other countries, have had to adopt extensive consumer education procedures that serve largely to confirm that choosing electricity suppliers is daunting. Electricity is not unique in this respect; numerous studies find that consumers are generally reluctant to switch brands, even when they are well-informed about product characteristics. If consumers prefer not to choose, opening regulated markets can reduce welfare, even for some consumers who do switch, as the incumbent can exploit this preference by raising price above the formerly regulated level. Policies to open markets might be successful even if limited to industrial and commercial customers, with residential prices based on those in nominally competitive wholesale markets

Grain-boundary engineering applied to grain growth in a high temperature material

International Nuclear Information System (INIS)

Huda, Z.

1993-01-01

Crystallography of grain boundaries are determined for a high temperature material, before and after grain growth processes, so as to study the induction of special properties useful for application in components of a gas-turbine engine. The philosophy of grain-boundary engineering is applied to grain growth in APK-6, a powder formed nickel-base superalloy so as to establish the possible structure/property relationships. The alloy in the as received condition is shown to possess a strong texture and contained coincident site lattices (CSL) boundaries with most boundaries having sigma values in the range of 3 > sigma > 25. A normal grain-growth heat treatment result in a good population of low angle grain boundaries, and drastically reduces the proportion of CSL boundaries. A strong [011] annealing texture is observed after an intermediate grain growth; most grain boundaries, here, tend to be high angle indicating a possibility of possessing special properties. (author)

Social Desirability and Self-Reports: Testing a Content and Response-Style Model of Socially Desirable Responding

Directory of Open Access Journals (Sweden)

Arta Dodaj

2012-11-01

Full Text Available Personality assessment as a pre-employment screening procedure receives great interest from both researchers and practitioners. One key concern for selection specialists is represented by the response distortion among job applicants completing personality inventories. There are different operationalizations of socially desirable responding. One of the most accepted operationalizations was provided by Paulhus who distinguished between two social desirability factors (the egoistic and moralistic bias as well as their conscious and unconscious aspects (management and enhancement. The aim of the study reported here is to test the basic assumption of the Paulhus model of socially desirable responding. A convenience sample of 200 students (N = 21.61; SD = 1.46 completed the Comprehensive Inventory of Desirable Responding (Paulhus, 2006 and the International Personality Item Pool Questionnaire (Goldberg, 1999; by Goldberg et al., 2006. Questionnaires were applied in three conditions: honest responding, responding as an ideal manager job applicant, and as an ideal teacher applicant. Results give partial support to the existence of egoistic and moralistic bias. However, conscious and unconscious aspects of distortion were not found. In conclusion it could be said that Paulhus’ model doesn’t provide a full answer to the problem of the nature of socially desirable responding.

Phloem Transport of Arsenic Species from Flag Leaf to Grain During Grain Filling

Energy Technology Data Exchange (ETDEWEB)

A Carey; G Norton; C Deacon; K Scheckel; E Lombi; T Punshon; M Guerinot; A Lanzirotti; M Newville; et al.

2011-12-31

Strategies to reduce arsenic (As) in rice grain, below concentrations that represent a serious human health concern, require that the mechanisms of As accumulation within grain be established. Therefore, retranslocation of As species from flag leaves into filling rice grain was investigated. Arsenic species were delivered through cut flag leaves during grain fill. Spatial unloading within grains was investigated using synchrotron X-ray fluorescence (SXRF) microtomography. Additionally, the effect of germanic acid (a silicic acid analog) on grain As accumulation in arsenite-treated panicles was examined. Dimethylarsinic acid (DMA) and monomethylarsonic acid (MMA) were extremely efficiently retranslocated from flag leaves to rice grain; arsenate was poorly retranslocated, and was rapidly reduced to arsenite within flag leaves; arsenite displayed no retranslocation. Within grains, DMA rapidly dispersed while MMA and inorganic As remained close to the entry point. Germanic acid addition did not affect grain As in arsenite-treated panicles. Three-dimensional SXRF microtomography gave further information on arsenite localization in the ovular vascular trace (OVT) of rice grains. These results demonstrate that inorganic As is poorly remobilized, while organic species are readily remobilized, from leaves to grain. Stem translocation of inorganic As may not rely solely on silicic acid transporters.

Phloem transport of arsenic species from flag leaf to grain during grain filling

Energy Technology Data Exchange (ETDEWEB)

Carey, Anne-Marie; Norton, Gareth J.; Deacon, Claire; Scheckel, Kirk G.; Lombi, Enzo; Punshon, Tracy; Guerinot, Mary Lou; Lanzirotti, Antonio; Newville, Matt; Choi, Yongseong; Price, Adam H.; Meharg, Andrew A. (EPA); (U. South Australia); (Aberdeen); (UC); (Dartmouth)

2011-09-20

Strategies to reduce arsenic (As) in rice grain, below concentrations that represent a serious human health concern, require that the mechanisms of As accumulation within grain be established. Therefore, retranslocation of As species from flag leaves into filling rice grain was investigated. Arsenic species were delivered through cut flag leaves during grain fill. Spatial unloading within grains was investigated using synchrotron X-ray fluorescence (SXRF) microtomography. Additionally, the effect of germanic acid (a silicic acid analog) on grain As accumulation in arsenite-treated panicles was examined. Dimethylarsinic acid (DMA) and monomethylarsonic acid (MMA) were extremely efficiently retranslocated from flag leaves to rice grain; arsenate was poorly retranslocated, and was rapidly reduced to arsenite within flag leaves; arsenite displayed no retranslocation. Within grains, DMA rapidly dispersed while MMA and inorganic As remained close to the entry point. Germanic acid addition did not affect grain As in arsenite-treated panicles. Three-dimensional SXRF microtomography gave further information on arsenite localization in the ovular vascular trace (OVT) of rice grains. These results demonstrate that inorganic As is poorly remobilized, while organic species are readily remobilized, from leaves to grain. Stem translocation of inorganic As may not rely solely on silicic acid transporters.

Ionizing radiation for insect control in grain and grain products

International Nuclear Information System (INIS)

Tilton, E.W.; Brower, J.H.

1987-01-01

A technical review summarizes and discusses information on various aspects of the use of ionizing radiation for the control of insect infestation in grains and grain products. Topics include: the effects of ionizing radiation on insects infesting stored-grain products; the 2 main types of irradiators (electron accelerators; radioisotopes (e.g.: Co-60; Cs-137); dosimetry systems and methodology; variations in radiation resistance by stored-product pests; the proper selection of radiation dose; the effects of combining various treatments (temperature, infrared/microwave radiation, hypoxia, chemicals) with ionizing radiation; sublethal radiation for controlling bulk grain insects; the feeding capacity of irradiated insects; the susceptibility of insecticide-resistant insects to ionizing radiation; and the possible resistance of insects to ionizing radiation. Practical aspects of removing insects from irradiated grain also are discussed

Stress-assisted grain growth in nanocrystalline metals: Grain boundary mediated mechanisms and stabilization through alloying

International Nuclear Information System (INIS)

Zhang, Yang; Tucker, Garritt J.; Trelewicz, Jason R.

2017-01-01

The mechanisms of stress-assisted grain growth are explored using molecular dynamics simulations of nanoindentation in nanocrystalline Ni and Ni-1 at.% P as a function of grain size and deformation temperature. Grain coalescence is primarily confined to the high stress region beneath the simulated indentation zone in nanocrystalline Ni with a grain size of 3 nm. Grain orientation and atomic displacement vector mapping demonstrates that coalescence transpires through grain rotation and grain boundary migration, which are manifested in the grain interior and grain boundary components of the average microrotation. A doubling of the grain size to 6 nm and addition of 1 at.% P eliminates stress-assisted grain growth in Ni. In the absence of grain coalescence, deformation is accommodated by grain boundary-mediated dislocation plasticity and thermally activated in pure nanocrystalline Ni. By adding solute to the grain boundaries, the temperature-dependent deformation behavior observed in both the lattice and grain boundaries inverts, indicating that the individual processes of dislocation and grain boundary plasticity will exhibit different activity based on boundary chemistry and deformation temperature.

Choosing Fighting Competitors Among Men: Testosterone, Personality, and Motivations.

Science.gov (United States)

Borráz-León, Javier I; Cerda-Molina, Ana Lilia; Rantala, Markus J; Mayagoitia-Novales, Lilian

2018-01-01

Higher testosterone levels have been positively related to a variety of social behaviors and personality traits associated with intrasexual competition. The aim of this study was to evaluate the role of testosterone levels and personality traits such as aggressiveness, competitiveness, and self-esteem on the task of choosing a fighting competitor (a rival) with or without a motivation to fight. In Study 1, a group of 119 men participated in a task for choosing a rival through pictures of men with high-dominant masculinity versus low-dominant masculinity. Participants completed three personality questionnaires and donated two saliva samples (pre-test and post-test sample) to quantify their testosterone levels. We found that the probability of choosing high-dominant masculine men as rivals increased with higher aggressiveness scores. In Study 2, the task of choosing rivals was accompanied by motivations to fight (pictures of women with high or low waist-to-hip ratio [WHR]). In this context, we observed that the probability of choosing dominant masculine men as rivals depended on the WHR of the women. Overall, average levels of post-test testosterone, aggressiveness, and high self-esteem increased the probability to fight for women with low WHR independently of the dominance masculinity of the rivals. Our results indicate that human decisions, in the context of intrasexual competition and mate choice, are regulated by physiological and psychological mechanisms allowing men to increase their biological fitness. We discuss our results in the light of the plasticity of human behavior according to biological and environmental forces.

Hormonal changes in the grains of rice subjected to water stress during grain filling.

Science.gov (United States)

Yang, J; Zhang, J; Wang, Z; Zhu, Q; Wang, W

2001-09-01

Lodging-resistant rice (Oryza sativa) cultivars usually show slow grain filling when nitrogen is applied in large amounts. This study investigated the possibility that a hormonal change may mediate the effect of water deficit that enhances whole plant senescence and speeds up grain filling. Two rice cultivars showing high lodging resistance and slow grain filling were field grown and applied with either normal or high amount nitrogen (HN) at heading. Well-watered and water-stressed (WS) treatments were imposed 9 days post anthesis to maturity. Results showed that WS increased partitioning of fixed (14)CO(2) into grains, accelerated the grain filling rate but shortened the grain filling period, whereas the HN did the opposite way. Cytokinin (zeatin + zeatin riboside) and indole-3-acetic acid contents in the grains transiently increased at early filling stage and WS treatments hastened their declines at the late grain filling stage. Gibberellins (GAs; GA(1) + GA(4)) in the grains were also high at early grain filling but HN enhanced, whereas WS substantially reduced, its accumulation. Opposite to GAs, abscisic acid (ABA) in the grains was low at early grain filling but WS remarkably enhanced its accumulation. The peak values of ABA were significantly correlated with the maximum grain filling rates (r = 0.92**, P water stress during grain filling, especially a decrease in GAs and an increase in ABA, enhances the remobilization of prestored carbon to the grains and accelerates the grain filling rate.

Login | Desire2Learn@UWM

Science.gov (United States)

Libraries A-Z Directory UW-Milwaukee Logo Desire2Learn@UWM Logo Desire2Learn@UWM, UW-Milwaukee Login For Students For Instructors Get Help With D2L Login UWM ePantherID This is the login option for UWM students ? Contact support for help with your ePantherID Non-ePantherID This is the login option used for D2L

Role of the superior colliculus in choosing mixed-strategy saccades.

Science.gov (United States)

Thevarajah, Dhushan; Mikulić, Areh; Dorris, Michael C

2009-02-18

Game theory outlines optimal response strategies during mixed-strategy competitions. The neural processes involved in choosing individual strategic actions, however, remain poorly understood. Here, we tested whether the superior colliculus (SC), a brain region critical for generating sensory-guided saccades, is also involved in choosing saccades under strategic conditions. Monkeys were free to choose either of two saccade targets as they competed against a computer opponent during the mixed-strategy game "matching pennies." The accuracy with which presaccadic SC activity predicted upcoming choice gradually increased in the time leading up to the saccade. Probing the SC with suprathreshold stimulation demonstrated that these evolving signals were functionally involved in preparing strategic saccades. Finally, subthreshold stimulation of the SC increased the likelihood that contralateral saccades were selected. Together, our results suggest that motor regions of the brain play an active role in choosing strategic actions rather than passively executing those prespecified by upstream executive regions.

Non-destructive, high-content analysis of wheat grain traits using X-ray micro computed tomography

Directory of Open Access Journals (Sweden)

Nathan Hughes

2017-11-01

Full Text Available Abstract Background Wheat is one of the most widely grown crop in temperate climates for food and animal feed. In order to meet the demands of the predicted population increase in an ever-changing climate, wheat production needs to dramatically increase. Spike and grain traits are critical determinants of final yield and grain uniformity a commercially desired trait, but their analysis is laborious and often requires destructive harvest. One of the current challenges is to develop an accurate, non-destructive method for spike and grain trait analysis capable of handling large populations. Results In this study we describe the development of a robust method for the accurate extraction and measurement of spike and grain morphometric parameters from images acquired by X-ray micro-computed tomography (μCT. The image analysis pipeline developed automatically identifies plant material of interest in μCT images, performs image analysis, and extracts morphometric data. As a proof of principle, this integrated methodology was used to analyse the spikes from a population of wheat plants subjected to high temperatures under two different water regimes. Temperature has a negative effect on spike height and grain number with the middle of the spike being the most affected region. The data also confirmed that increased grain volume was correlated with the decrease in grain number under mild stress. Conclusions Being able to quickly measure plant phenotypes in a non-destructive manner is crucial to advance our understanding of gene function and the effects of the environment. We report on the development of an image analysis pipeline capable of accurately and reliably extracting spike and grain traits from crops without the loss of positional information. This methodology was applied to the analysis of wheat spikes can be readily applied to other economically important crop species.

Grain dynamics and inter-grain coupling in dusty plasma Coulomb crystals

International Nuclear Information System (INIS)

Rahman, H.U.; Mohideen, U.; Smith, M.A.; Rosenberg, M.; Mendis, D.A.

2001-01-01

We review our results on the lattice structure and the lattice dynamics of dusty plasma Coulomb crystals formed in rectangular conductive grooves. The basic structure appears to be made of mutually repulsive columns of grains confined by the walls of the groove. The columns are oriented along the direction of the electrode sheath electric field. Inter-grain coupling as a function of plasma temperature and density were investigated by measurement of these parameters. A simple phenomenological model wherein the inter-grain spacing along the column results from an attractive electric field induced dipole-dipole force balanced by a repulsive monopole Coulomb force is consistent with observed features of the Coulomb crystal. In addition, here we present some preliminary measurements of the vibration and rotation dynamics of the individual grains in the Coulomb crystal. The thermal energy of the dust grain thus calculated is much less than the inter-grain Coulomb potential energy as required for the formation of stable structures. Also the observed rotational frequency is consistent with the assumption of thermal equilibrium between the dust grains and the neutral gas. (orig.)

Microbiota of kefir grains

Directory of Open Access Journals (Sweden)

Tomislav Pogačić

2013-03-01

Full Text Available Kefir grains represent the unique microbial community consisting of bacteria, yeasts, and sometimes filamentous moulds creating complex symbiotic community. The complexity of their physical and microbial structures is the reason that the kefir grains are still not unequivocally elucidated. Microbiota of kefir grains has been studied by many microbiological and molecular approaches. The development of metagenomics, based on the identification without cultivation, is opening new possibilities for identification of previously nonisolated and non-identified microbial species from the kefir grains. Considering recent studies, there are over 50 microbial species associated with kefir grains. The aim of this review is to summarise the microbiota composition of kefir grains. Moreover, because of technological and microbiological significance of the kefir grains, the paper provides an insight into the microbiological and molecular methods applied to study microbial biodiversity of kefir grains.

Total phenolic content and antioxidant activities of pomegranate juice and whey based novel beverage fermented by kefir grains.

Science.gov (United States)

Sabokbar, Nayereh; Khodaiyan, Faramarz

2016-01-01

Mixture of pomegranate juice and whey was evaluated as a potential substrate for production of a novel beverage by kefir grains. The effects of two different variables, fermentation, temperature (19 and 25 °C) and kefir grain amount (5 %w/v and 8 %w/v), on total phenolic content (TPC) and antioxidant activities of beverage were examined during a fermentation time of 32 h. TPC and antioxidant activities including 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging, reducing power, inhibition effect upon linoleic acid autoxidation and inhibition effect upon ascorbate autoxidation increased significantly (p < 0.05) during fermentation, but metal chelating effect showed no significant difference. The highest increases were observed when the temperature of 25 °C and kefir grain amount of 8 %w/v were applied. Results proved antioxidant activities of beverages were desirable and fermentation by kefir grains has the ability to enhance these antioxidant activities, as compared with unfermented beverage. Also pomegranate juice and whey were suitable media for producing a novel dairy-juice beverage.

Origins of GEMS Grains

Science.gov (United States)

Messenger, S.; Walker, R. M.

2012-01-01

Interplanetary dust particles (IDPs) collected in the Earth s stratosphere contain high abundances of submicrometer amorphous silicates known as GEMS grains. From their birth as condensates in the outflows of oxygen-rich evolved stars, processing in interstellar space, and incorporation into disks around new stars, amorphous silicates predominate in most astrophysical environments. Amorphous silicates were a major building block of our Solar System and are prominent in infrared spectra of comets. Anhydrous interplanetary dust particles (IDPs) thought to derive from comets contain abundant amorphous silicates known as GEMS (glass with embedded metal and sulfides) grains. GEMS grains have been proposed to be isotopically and chemically homogenized interstellar amorphous silicate dust. We evaluated this hypothesis through coordinated chemical and isotopic analyses of GEMS grains in a suite of IDPs to constrain their origins. GEMS grains show order of magnitude variations in Mg, Fe, Ca, and S abundances. GEMS grains do not match the average element abundances inferred for ISM dust containing on average, too little Mg, Fe, and Ca, and too much S. GEMS grains have complementary compositions to the crystalline components in IDPs suggesting that they formed from the same reservoir. We did not observe any unequivocal microstructural or chemical evidence that GEMS grains experienced prolonged exposure to radiation. We identified four GEMS grains having O isotopic compositions that point to origins in red giant branch or asymptotic giant branch stars and supernovae. Based on their O isotopic compositions, we estimate that 1-6% of GEMS grains are surviving circumstellar grains. The remaining 94-99% of GEMS grains have O isotopic compositions that are indistinguishable from terrestrial materials and carbonaceous chondrites. These isotopically solar GEMS grains either formed in the Solar System or were completely homogenized in the interstellar medium (ISM). However, the

Preference of settled according to young families’ perception in choosing residence in Namo Rambe District, Deli Serdang Regency, Indonesia

Science.gov (United States)

Nirfalini Aulia, Dwira; Nofita Syahri, Devy

2018-03-01

Young families in the productive age require a home to live in new social environments, self-actualizing, and through the process of family development. Therefore, the space needed for young families is an area that adheres to the principles of efficient, practical, flexible, multifunctional by placing the working principle as the main principle. Also, every individual has different desires. Therefore, the preference according to the perception of young families in choosing a residential house in a different housing. The purpose of this study was to identify the characteristics of the desire (preference) of young households in the choice of a home stay. The research method used is the descriptive quantitative method. This study uses Likert Scale to measure the respondents’ assessment of some housing in Namo Rambe District through the questionnaire. The results of this study indicate that comfort is a pull factor in the selection of homes for young families in the Namo Rambe District in terms of physiological needs, in addition to proximity to the means of trade and the use of good building materials. While the completeness of social facilities is a push factor that influences the choice.

The effects of irradiation on grain coat color and grain texture in winter wheat

International Nuclear Information System (INIS)

Miao Bingliang; Liu Xueyu

1989-01-01

Dry seeds of the variety ''Yangmai 5'' with red grain coat, semihard grain texture, and the variety ''Ningmai 3'' with red grain coat, soft grain texture were irradiated with Y-rays at various doses.The effect on M1 grain coat color was different between two varieties, the higher doses made grain coat color of ''Yangmai 5'' redder, but had hardly effect on ''Ningmai 3''.The effect on M1 grain texture showed that the grain texture became softer with doses increased.It was found that there were 0.6% of positive ( red to white ) grain coat color mutants and 2.0% of negative(hard to soft) grain texture mutants in M2 of ''Yangmai 5'', and there were 0.7% of negative ( white to red ) grain coat color mutants and 3.6% of positive ( soft to hard ) grain texture mutants in M2 of ''Ningmai 3''. It seemed that the positive mutants selected in M3 were stable in M4. The results showed that γ-rays can be used to improve the grain coat color andgrain texture of wheat varieties

A novel ultra-low carbon grain oriented silicon steel produced by twin-roll strip casting

Energy Technology Data Exchange (ETDEWEB)

Wang, Yang, E-mail: wy069024019@163.com [State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819 (China); Zhang, Yuan-Xiang; Lu, Xiang; Fang, Feng; Xu, Yun-Bo; Cao, Guang-Ming; Li, Cheng-Gang [State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819 (China); Misra, R.D.K. [Laboratory for Excellence in Advanced Steel Research, Department of Metallurgical, Materials and Biomedical Engineering, University of Texas at El Paso, TX 79968 (United States); Wang, Guo-Dong [State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819 (China)

2016-12-01

A novel ultra-low carbon grain oriented silicon steel was successfully produced by strip casting and two-stage cold rolling method. The microstructure, texture and precipitate evolution under different first cold rolling reduction were investigated. It was shown that the as-cast strip was mainly composed of equiaxed grains and characterized by very weak Goss texture ({110}<001>) and λ-fiber (<001>//ND). The coarse sulfides of size ~100 nm were precipitated at grain boundaries during strip casting, while nitrides remained in solution in the as-cast strip and the fine AlN particles of size ~20–50 nm, which were used as grain growth inhibitors, were formed in intermediate annealed sheet after first cold rolling. In addition, the suitable Goss nuclei for secondary recrystallization were also formed during intermediate annealing, which is totally different from the conventional process that the Goss nuclei originated in the subsurface layer of the hot rolled sheet. Furthermore, the number of AlN inhibitors and the intensity of desirable Goss texture increased with increasing first cold rolling reduction. After secondary recrystallization annealing, very large grains of size ~10–40 mm were formed and the final magnetic induction, B{sub 8}, was as high as 1.9 T. - Highlights: • A novel chemical composition base on strip casting silicon steel was proposed. • The ultra-low carbon design could shorten the processing routes. • The novel composition and processes were beneficial to obtain more inhibitors. • The magnetic induction of grain oriented silicon steel was significantly improved.

Choose Privacy Week: Educate Your Students (and Yourself) about Privacy

Science.gov (United States)

Adams, Helen R.

2016-01-01

The purpose of "Choose Privacy Week" is to encourage a national conversation to raise awareness of the growing threats to personal privacy online and in day-to-day life. The 2016 Choose Privacy Week theme is "respecting individuals' privacy," with an emphasis on minors' privacy. A plethora of issues relating to minors' privacy…

Sport, how people choose it: A network analysis approach.

Science.gov (United States)

Ferreri, Luca; Ivaldi, Marco; Daolio, Fabio; Giacobini, Mario; Rainoldi, Alberto; Tomassini, Marco

2015-01-01

In order to investigate the behaviour of athletes in choosing sports, we analyse data from part of the We-Sport database, a vertical social network that links athletes through sports. In particular, we explore connections between people sharing common sports and the role of age and gender by applying "network science" approaches and methods. The results show a disassortative tendency of athletes in choosing sports, a negative correlation between age and number of chosen sports and a positive correlation between age of connected athletes. Some interesting patterns of connection between age classes are depicted. In addition, we propose a method to classify sports, based on the analyses of the behaviour of people practising them. Thanks to this brand new classifications, we highlight the links of class of sports and their unexpected features. We emphasise some gender dependency affinity in choosing sport classes.

Grain boundary and grain interior conduction in γ'-Bi2MoO6

International Nuclear Information System (INIS)

Vera, C.M.C.; Aragon, R.

2005-01-01

Impedance spectroscopy of fine grained ( 2 MoO 6 samples, in the frequency range of 0.1 Hz-250 kHz, relevant to sensor applications, up to 800 deg. C, has been used to characterize grain boundary and grain interior contributions to conduction. Above 500 deg. C, the grain boundary contribution is no longer rate limiting and conduction is dominated by the grain interior component. The corresponding activation energies are 0.98 eV for grain boundary and 0.73 eV for grain interior components. The weak dependence of conductivity on oxygen partial pressure below 500 deg. C can be attributed to electrode-electrolyte interface phenomena, whereas the robust response to ethanol is commensurate with changes in intrinsic ionic conductivity

Grain Entrapment Pressure on the Torso: Can You Breathe while Buried in Grain?

Science.gov (United States)

Moore, Kevin G; Jones, Carol L

2017-04-26

The pressure applied to the chest and back of a simulated grain entrapment victim was measured. Pressure sensors were attached to the chest and back of a manikin that was buried in grain in the vertical position. Measurements were made in four grain types at four grain depths ranging from the top of the manikin's shoulders to 0.61 m (24 in.) over the head. The pressure ranged from 1.6 to 4.0 kPa (0.23 to 0.57 psi). Based on available physiological information, this amount of pressure is unlikely to limit the respiration of an otherwise healthy adult male victim. However, other factors, such as the victim's age, gender, and body position in the grain, may influence respiration. The aspiration of grain appears to be the most likely asphyxiation risk during grain bin entrapment. Entering a grain storage bin is inherently dangerous, and Occupational Safety and Health Administration (OSHA) guidelines for permit-required confined spaces and grain handling facilities must be followed. Due to the risk of grain aspiration during engulfment, the development of safety equipment that could help protect the airway of a victim should be investigated. Copyright© by the American Society of Agricultural Engineers.

Rational desires and the limitation of life-sustaining treatment.

Science.gov (United States)

Savulescu, Julian

1994-07-01

It is accepted that treatment of previously competent, now incompetent patients can be limited if that is what the patient would desire, if she were now competent. Expressed past preferences or an advance directive are often taken to constitute sufficient evidence of what a patient would now desire. I distinguish between desires and rational desires. I argue that for a desire to be an expression of a person's autonomy, it must be or satisfy that person's rational desires. A person rationally desires a course of action if that person desires it while being in possession of all available relevant facts, without committing relevant error of logic, and "vividly imagining" what its consequences would be like for her. I argue that some competent, expressed desires obstruct autonomy. I show that several psychological mechanisms operate to prevent a person rationally evaluating what future life in a disabled state would be like. Rational evaluation is difficult. However, treatment limitation, if it is to respect autonomy, must be in accord with a patient's rational desires, and not merely her expressed desires. I illustrate the implications of these arguments for the use of advance directives and for the treatment of competent patients.

Women Physicians: Choosing a Career in Academic Medicine

Science.gov (United States)

Borges, Nicole J.; Navarro, Anita M.; Grover, Amelia C.

2011-01-01

Purpose Despite recent efforts to understand the complex process of physician career development, the medical education community has a poor understanding of why, how, and when women physicians embark on a career in academic medicine. Method In 2010, the authors phone-interviewed women physicians in academic medicine regarding why, how, and when they chose an academic medicine career. Project investigators first individually and then collectively analyzed transcripts to identify themes in the data. Results Through analyzing the transcripts of the 53 interviews, the investigators identified five themes related to why women choose careers in academic medicine: fit, aspects of the academic health center environment, people, exposure, and clincial medicine. They identified five themes related to how women make the decision to enter academic medicine: change in specialty, dissatisfaction with former career, emotionality, parental influence, and decision-making styles. The authors also identified four themes regarding when women decide to enter academic medicine: as a practicing phyisican, fellow, resident, or medical student. Conclusions Choosing a career in academic medicine is greatly influenced by the environment in which one trains and by people—be they faculty, mentors, role models, or family. An interest in teaching is a primary reason women choose a career in academic medicine. Many women physicians entering acadmic medicine chose this after or during fellowship, which is when they became more aware of academic medicine as a possible career. For many women, choosing academic medicine was not necessarily an active, planned decision; rather it was serendipitous or circumstantial. PMID:22104052

Grain Handling and Storage.

Science.gov (United States)

Harris, Troy G.; Minor, John

This text for a secondary- or postecondary-level course in grain handling and storage contains ten chapters. Chapter titles are (1) Introduction to Grain Handling and Storage, (2) Elevator Safety, (3) Grain Grading and Seed Identification, (4) Moisture Control, (5) Insect and Rodent Control, (6) Grain Inventory Control, (7) Elevator Maintenance,…

Grain Grading and Handling.

Science.gov (United States)

Rendleman, Matt; Legacy, James

This publication provides an introduction to grain grading and handling for adult students in vocational and technical education programs. Organized in five chapters, the booklet provides a brief overview of the jobs performed at a grain elevator and of the techniques used to grade grain. The first chapter introduces the grain industry and…

A Desire for Social Media Is Associated With a Desire for Solitary but Not Social Activities.

Science.gov (United States)

Hill, Lauren; Zheng, Zane

2017-01-01

While social media is an aspect of life for many, it brings to light the lack of interpersonal connection when browsing activity occurs. The displacement theory suggests that the quality of one's offline interactions is affected by how much time an individual allots to those exchanges. Depending on the amount of time spent online, interpersonal connections may suffer and lead to negative psychological consequences. Our study aimed to explore the relationship between the desirability of social media and socialization preferences through a cue-based perceptual judgment task where participants ( N = 136) rated 40 gray-scale images in terms of their desirability. The image categories included social media icons, singular scenes depicting an isolated activity, social scenes representing an interactive activity, and traffic signs as the control. We also included questionnaires to assess depressiveness and aspects of social media usage. Our findings suggest that the immediate desire for social media is potentially linked to one's desire for social isolation as represented by the singular scene category, the intensity of participant's reported daily usage, and the extent to which social media is perceived to impact real social life. To our knowledge, this is the first report on the initial desirability judgment of social media and its association with other factors. Further research is needed to distinguish the variability in users' aim of using social media and if that is related to one's perceived feelings of social connectedness and solitude.

Concurrent grain boundary motion and grain rotation under an applied stress

International Nuclear Information System (INIS)

Gorkaya, Tatiana; Molodov, Konstantin D.; Molodov, Dmitri A.; Gottstein, Guenter

2011-01-01

Simultaneous shear coupling and grain rotation were observed experimentally during grain boundary migration in high-purity Al bicrystals subjected to an external mechanical stress at elevated temperatures. This behavior is interpreted in terms of the structure of the investigated planar 18.2 o non-tilt grain boundary with a 20 o twist component. For characterization of the grain rotation after annealing under stress the bicrystal surface topography across the boundary was measured by atomic force microscopy. The temperature dependence of the boundary migration rate was measured and the migration activation energy determined.

Methods of assessing grain-size distribution during grain growth

DEFF Research Database (Denmark)

Tweed, Cherry J.; Hansen, Niels; Ralph, Brian

1985-01-01

This paper considers methods of obtaining grain-size distributions and ways of describing them. In order to collect statistically useful amounts of data, an automatic image analyzer is used, and the resulting data are subjected to a series of tests that evaluate the differences between two related...... distributions (before and after grain growth). The distributions are measured from two-dimensional sections, and both the data and the corresponding true three-dimensional grain-size distributions (obtained by stereological analysis) are collected. The techniques described here are illustrated by reference...

Who chooses, who uses, who rates: the impact of agency on electronic word-of-mouth about hospitals stays.

Science.gov (United States)

Drevs, Florian; Hinz, Vera

2014-01-01

Patients' agents rather than patients themselves often choose hospitals and rehabilitation centers and evaluate inpatient stays. Thus, online reviews of a hospital may reflect a service experience the patient is not responsible for in two ways. First, a patient may evaluate a hospital that a physician as agent has selected, although he still received the service and is qualified to evaluate it. Second, relatives who may not be directly involved in the inpatient stay may write online reviews, which reflect their own experiences and evaluations. The study analyzes patient satisfaction data in online hospitals reviews and patients' underlying motives for electronic word-of-mouth according to the type of hospital admission and the perspective of the reviewer. The study uses a sample of 822 reviews from an online platform for hospital reviews and primary data generated by an online survey distributed to the writers of these reviews. Patients who choose a hospital themselves write more positive online reviews than those with an other-directed choice. Relatives' online reviews more often deal with negative hospital experiences and are more likely to reflect a desire for retaliation. The study results imply that medical care centers (hospitals and rehabilitation facilities) should pay more attention to agency by focusing on the needs and perceptions of relatives who often act as the critical voice of patients in electronic word-of-mouth behavior.

Grain boundary structure and properties

International Nuclear Information System (INIS)

Balluffi, R.W.

1979-01-01

An attempt is made to distinguish those fundamental aspects of grain boundaries which should be relevant to the problem of the time dependent fracture of high temperature structural materials. These include the basic phenomena which are thought to be associated with cavitation and cracking at grain boundaries during service and with the more general microstructural changes which occur during both processing and service. A very brief discussion of the current state of our knowledge of these fundamentals is given. Included are the following: (1) structure of ideal perfect boundaries; (2) defect structure of grain boundaries; (3) diffusion at grain boundaries; (4) grain boundaries as sources/sinks for point defects; (5) grain boundary migration; (6) dislocation phenomena at grain boundaries; (7) atomic bonding and cohesion at grain boundaries; (8) non-equilibrium properties of grain boundaries; and (9) techniques for studying grain boundaries

Grain quality and N uptake of spring cereals as affected by nitrogen fertilization in northern conditions: a meta-analysis

Directory of Open Access Journals (Sweden)

Elena Valkama

2013-06-01

Full Text Available We reviewed quantitatively 40 Finnish field experiments related to the effect of nitrogen (N fertilizer on the main parameters of grain quality and N uptake of spring cereals. The experiments were conducted on a wide range of mineral soils under varying growth conditions from the 1950s to the 1990s. Overall there was no statistically significant effect on 1000 grain weight and a slightly negative effect on grain test weight. Nitrogen fertilizer increased N uptake much more steeply in slightly acidic soils (SA, pH 5.8–6.9, located mostly in South Finland, than in moderately acidic soils (MA, pH 5.0–5.7, located in Central Finland. With increasing N rates, protein content increased to a larger extent in spring barley and oats than in spring wheat. In the light of the current trend to reduce N fertilizerapplication, the obtained regressions between N rates and the parameters of grain quality may be used to maintain yield quality at a desirable level, while optimizing N management.

Cutoff score of the sexual interest and desire inventory-female for diagnosis of hypoactive sexual desire disorder

NARCIS (Netherlands)

Clayton, Anita H.; Segraves, Robert T.; Bakish, David; Goldmeier, David; Tignol, Jean; van Lunsen, Rik H. W.; Nappi, Rossella E.; Wunderlich, Glen; Kimura, Toshio; Lewis-D'Agostino, Diane J.; Pyke, Robert

2010-01-01

To determine the most appropriate cutoff value for the Sexual Interest and Desire Inventory-Female (SIDI-F) score to discriminate between women with hypoactive sexual desire disorder (HSDD) and those with no female sexual dysfunction (FSD). The SIDI-F is a clinician-rated instrument consisting of 13

Interstellar grains

Energy Technology Data Exchange (ETDEWEB)

Hoyle, F.; Wickramasinghe, N.C.

1980-11-01

Interstellar extinction of starlight was observed and plotted as a function of inverse wavelength. Agreement with the calculated effects of the particle distribution is shown. The main kinds of grain distinguished are: (1) graphite spheres of radius 0.02 microns, making up 10% of the total grain mass (2) small dielectric spheres of radius 0.04 microns making up 25% and (3) hollow dielectric cylinders containing metallic iron, with diameters of 2/3 microns making up 45%. The remaining 20% consists of other metals, metal oxides, and polysiloxanes. Absorption factor evidence suggests that the main dielectric component of the grains is organic material.

Reproductive performance of reindeer fed all-grain and hay-grain rations

Directory of Open Access Journals (Sweden)

J. M. Blanchard

1986-06-01

Full Text Available Reproductive performance of grain-fed reindeer {Rangifer tarandus was evaluated over a 2-year period. Groups of pregnant reindeer were fed one of three rations, (1 100% whole-grain barley, (2 98.9% whole-grain barley and 1.2% mineral and trace element supplement, and (3 70% whole-grain barley and 30% finely-chopped bluegrass hay. Reindeer fed unsupplemented whole-barley failed to produce a single live calf. The addition of mineral and trace element supplement to the ration did not result in any significant improvement in reproductive performance. Eighty-five percent of the reindeer consuming unsupplemented and supplemented all-barley rations became pregnant; however, 76% of the pregnancies resulted in stillborn calves. One-hundred percent of the cows maintained on the grain/hay ration produced live calves. We speculate that reproductive failure in reindeer cows maintained on all-grain rations is most likely a result of a diet induced disfunction in maternal rumen and/or carbohydrate metabolism rather than a micro-nutrient deficiency. More research is neeeded to determine which metabolic pathways are affected.

Choosing wisely-where is the choice?

Directory of Open Access Journals (Sweden)

Robbins RA

2013-06-01

Full Text Available No abstract available. Article truncated at 150 words. A little over a year ago an editorial was posted in the Southwest Journal about the Choosing Wisely campaign from the American Board of Internal Medicine and Consumer Reports (1. You may remember that Choosing Wisely announced a list of procedures or treatments that patients should question (2. In the editorial we wondered why pulmonary organizations such as the American Thoracic Society (ATS and the American College of Chest Physicians authored none of the recommendations and offered 10 suggestions. We also openly questioned if the recommendations were intended to improve patient care or reduce costs, and thus improve the profits of third party carriers. We can now report that recommendations were announced at the recent ATS meeting in Philadelphia. Seven recommendations were made for critical care and seven for pulmonary disease. Five from the critical care list and five from the pulmonary list will eventually be chosen for inclusion in …

Production of Al-Ti-B grain refining master alloys from Na2B4O7 and K2TiF6

International Nuclear Information System (INIS)

Birol, Yuecel

2008-01-01

It is very desirable to replace the KBF 4 salt in the popular 'halide salt' process to reduce the volume of fluoride salts to be added to molten aluminium in the production of Al-Ti-B grain refiners. Being over 2 times richer in B, Na 2 B 4 O 7 is a promising replacement for KBF 4 , and is used in the present work to produce Al-Ti-B grain refiner master alloys. A fraction of the aluminide particles were entrapped in the spent salt giving a relatively lower Ti recovery when KBF 4 was replaced by Na 2 B 4 O 7 . The grain refining performance of the Al-Ti-B grain refiner alloy thus produced was nevertheless acceptable. The spent salt became too viscous with the oxides, aluminides and borides to be removed by decanting when Na 2 B 4 O 7 .5H 2 O was used to supply boron. The viscous spent salt, entrained in the grain refiner alloy, did not only impair its performance, but also hurt the fluidity of the molten alloy and made pouring difficult

Why do interstellar grains exist

International Nuclear Information System (INIS)

Seab, C.G.; Hollenbach, D.J.; Mckee, C.F.; Tielens, A.G.G.M.

1986-01-01

There exists a discrepancy between calculated destruction rates of grains in the interstellar medium and postulated sources of new grains. This problem was examined by modelling the global life cycle of grains in the galaxy. The model includes: grain destruction due to supernovae shock waves; grain injection from cool stars, planetary nebulae, star formation, novae, and supernovae; grain growth by accretion in dark clouds; and a mixing scheme between phases of the interstellar medium. Grain growth in molecular clouds is considered as a mechanism or increasing the formation rate. To decrease the shock destruction rate, several new physical processes, such as partial vaporization effects in grain-grain collisions, breakdown of the small Larmor radius approximation for betatron acceleration, and relaxation of the steady-state shock assumption are included

The who, what, when, and how of choosing a dietetics career.

Science.gov (United States)

Lordly, Daphne; Dubé, Nicole

2012-01-01

We describe factors influencing the career choices of students enrolled in Canadian dietetics programs. A survey was administered, in class or online, to core first- and fourth-year classes in seven dietetics programs in various provinces (n=397). Data were analyzed with the use of descriptive statistics. Chi-square testing for independence established significant relationships. Students ranked personal satisfaction, job security, and a professional career as important general career outcomes. These factors were also perceived to be attainable through a dietetics career. The majority of students chose dietetics while they were enrolled in a post-secondary degree program (44%), were primarily influenced by family members (54%), and based their choice on information acquired through the media (50%). Motivations for choosing dietetics included an interest in nutrition (91%) and health (90%), and a desire to help others (82%). Younger students placed more importance on economic rewards and having a position of authority than did older students. Older students identified personal satisfaction as more important in career selection than did younger students. Female respondents placed higher value on job flexibility than did their male counterparts. Career choice is based on a variety of internal and external factors. Opportunities exist for strategic recruitment efforts by educators and the profession.

Choosing High School Courses with Purpose

Science.gov (United States)

Ayotte, Steve; Sevier, Sharon

2010-01-01

In choosing high school courses, students often seem to focus on everything except preparation for an intended major or career. They consider graduation requirements, weighted classes, easy classes...but rarely are these types of choices preparing students for postsecondary education. This article describes the "Career Companion Guide"…

Evolution of grain boundary character distributions in alloy 825 tubes during high temperature annealing: Is grain boundary engineering achieved through recrystallization or grain growth?

International Nuclear Information System (INIS)

Bai, Qin; Zhao, Qing; Xia, Shuang; Wang, Baoshun; Zhou, Bangxin; Su, Cheng

2017-01-01

Grain boundary engineering (GBE) of nickel-based alloy 825 tubes was carried out with different cold drawing deformations by using a draw-bench on a factory production line and subsequent annealing at various temperatures. The microstructure evolution of alloy 825 during thermal-mechanical processing (TMP) was characterized by means of the electron backscatter diffraction (EBSD) technique to study the TMP effects on the grain boundary network and the evolution of grain boundary character distributions during high temperature annealing. The results showed that the proportion of ∑ 3 n coincidence site lattice (CSL) boundaries of alloy 825 tubes could be increased to > 75% by the TMP of 5% cold drawing and subsequent annealing at 1050 °C for 10 min. The microstructures of the partially recrystallized samples and the fully recrystallized samples suggested that the proportion of low ∑ CSL grain boundaries depended on the annealing time. The frequency of low ∑ CSL grain boundaries increases rapidly with increasing annealing time associating with the formation of large-size highly-twinned grains-cluster microstructure during recrystallization. However, upon further increasing annealing time, the frequency of low ∑ CSL grain boundaries decreased markedly during grain growth. So it is concluded that grain boundary engineering is achieved through recrystallization rather than grain growth. - Highlights: •The grain boundary engineering (GBE) is applicable to 825 tubes. •GBE is achieved through recrystallization rather than grain growth. •The low ∑ CSL grain boundaries in 825 tubes can be increased to > 75%.

Synthesis of few layer single crystal graphene grains on platinum by chemical vapour deposition

Directory of Open Access Journals (Sweden)

S. Karamat

2015-08-01

Full Text Available The present competition of graphene electronics demands an efficient route which produces high quality and large area graphene. Chemical vapour deposition technique, where hydrocarbons dissociate in to active carbon species and form graphene layer on the desired metal catalyst via nucleation is considered as the most suitable method. In this study, single layer graphene with the presence of few layer single crystal graphene grains were grown on Pt foil via chemical vapour deposition. The higher growth temperature changes the surface morphology of the Pt foil so a delicate process of hydrogen bubbling was used to peel off graphene from Pt foil samples with the mechanical support of photoresist and further transferred to SiO2/Si substrates for analysis. Optical microscopy of the graphene transferred samples showed the regions of single layer along with different oriented graphene domains. Two type of interlayer stacking sequences, Bernal and twisted, were observed in the graphene grains. The presence of different stacking sequences in the graphene layers influence the electronic and optical properties; in Bernal stacking the band gap can be tunable and in twisted stacking the overall sheet resistance can be reduced. Grain boundaries of Pt provides low energy sites to the carbon species, therefore the nucleation of grains are more at the boundaries. The stacking order and the number of layers in grains were seen more clearly with scanning electron microscopy. Raman spectroscopy showed high quality graphene samples due to very small D peak. 2D Raman peak for single layer graphene showed full width half maximum (FWHM value of 30 cm−1. At points A, B and C, Bernal stacked grain showed FWHM values of 51.22, 58.45 and 64.72 cm−1, while twisted stacked grain showed the FWHM values of 27.26, 28.83 and 20.99 cm−1, respectively. FWHM values of 2D peak of Bernal stacked grain showed an increase of 20–30 cm−1 as compare to single layer graphene

Testosterone and sexual desire in healthy women and men.

Science.gov (United States)

van Anders, Sari M

2012-12-01

Sexual desire is typically higher in men than in women, with testosterone (T) thought to account for this difference as well as within-sex variation in desire in both women and men. However, few studies have incorporated both hormonal and social or psychological factors in studies of sexual desire. The present study addressed how three psychological domains (sexual-relational, stress-mood, body-embodiment) were related to links between T and sexual desire in healthy adults and whether dyadic and solitary desire showed associations with T. Participants (n = 196) were recruited as part of the Partnering, Physiology, and Health study, which had 105 men and 91 women who completed questionnaires and provided saliva for cortisol and T assays. T was positively linked to solitary desire in women, with masturbation frequency influencing this link. In contrast, T was negatively correlated with dyadic desire in women, but only when cortisol and perceived social stress were controlled. Replicating past findings, no significant correlations between T and desire in men were apparent, but these analyses showed that the null association remained even when psychological and confound variables were controlled. Men showed higher desire than women, but masturbation frequency rather than T influenced this difference. Results were discussed in terms of challenges to assumptions of clear links between T and desire, gendered approaches to T, and the unitarity of desire.

Assemblaged by desire: Potterheads’ productive consumption

Directory of Open Access Journals (Sweden)

André Luiz Maranhão de Souza Leão

2018-02-01

Full Text Available The Harry Potter saga became one of the cultural products with a major impact on the twenty-first century. Its fans, called potterheads, relate in a social space known as fandom. Their practices are based on the appropriation of the cultural text in a productive consumption process within a context of participatory culture. Assuming desire from the perspective of Deleuzian assemblage theory, which presents this concept as a flow of productive energy that is articulated through a collective force, this study aimed to understand how potterheads’ productive consumption is assemblaged by desire. We therefore explored multifocal data concerning practices of potterheads available on digital platforms using Foucauldian Discourse Analysis. Our results revealed that potterheads’ desire assemblage maintains their bond with the canonical universe of the saga, as a way of maintaining identity and security in the transition to adult life, through relationships in the fandom and in pursuit of broader social legitimacy. The study contributes theoretically by adopting the Deleuzian notion of desire as a lens to understand the collective action of consumers in cultural contexts of practice.

Choosing a New Telephone System for Your Medical Practice.

Science.gov (United States)

Metherell, Brian

2016-01-01

E-mail may rule the world in other types of businesses, but for medical practices, the telephone remains the primary mode of communication with patients, specialists, and pharmacies. From making appointments to calling in prescriptions, telephones are essential to patient care. With technology changing very quickly and new capabilities coming into the medical practice, such as telemedicine and Skype, you need to know your options when choosing a new telephone system. The possibilities include on-site, cloud, and hybrid networked solutions. A wide variety of features and capabilities are available, from dozens of vendors. Of course, no matter what telephone solution you choose, you must meet regulatory compliance, particularly HIPAA, and Payment Card Industry Data Security Standard if you take credit cards. And it has to be affordable, reliable, and long lasting. This article explores what medical practices need to know when choosing a new business telephone system in order to find the right solutions for their businesses.

A Rare Allele of GS2 Enhances Grain Size and Grain Yield in Rice.

Science.gov (United States)

Hu, Jiang; Wang, Yuexing; Fang, Yunxia; Zeng, Longjun; Xu, Jie; Yu, Haiping; Shi, Zhenyuan; Pan, Jiangjie; Zhang, Dong; Kang, Shujing; Zhu, Li; Dong, Guojun; Guo, Longbiao; Zeng, Dali; Zhang, Guangheng; Xie, Lihong; Xiong, Guosheng; Li, Jiayang; Qian, Qian

2015-10-05

Grain size determines grain weight and affects grain quality. Several major quantitative trait loci (QTLs) regulating grain size have been cloned; however, our understanding of the underlying mechanism that regulates the size of rice grains remains fragmentary. Here, we report the cloning and characterization of a dominant QTL, grain size on chromosome 2 (GS2), which encodes Growth-Regulating Factor 4 (OsGRF4), a transcriptional regulator. GS2 localizes to the nucleus and may act as a transcription activator. A rare mutation of GS2 affecting the binding site of a microRNA, OsmiR396c, causes elevated expression of GS2/OsGRF4. The increase in GS2 expression leads to larger cells and increased numbers of cells, which thus enhances grain weight and yield. The introduction of this rare allele of GS2/OsGRF4 into rice cultivars could significantly enhance grain weight and increase grain yield, with possible applications in breeding high-yield rice varieties. Copyright © 2015 The Author. Published by Elsevier Inc. All rights reserved.

Desire thinking: what is it and what drives it?

Science.gov (United States)

Caselli, Gabriele; Spada, Marcantonio M

2015-05-01

The aim of this study was to provide an overview of the construct of desire thinking and test a metacognitive model of desire thinking and craving, based on the work of Spada, Caselli and Wells (2012; 2013), which aims to explain the perseveration of desire thinking. We conducted two studies involving four clinical samples (total N = 493) and a community sample (N = 494) presenting with different addictive behaviors. The relationships among variables were examined by testing the fit of path models within each sample. In the model presented it was proposed that positive metacognitions about desire thinking are associated with, in turn, imaginal prefiguration and verbal perseveration, marking the activation of desire thinking. Verbal perseveration is then associated to negative metacognitions about desire thinking and craving denoting the pathological escalation of desire thinking. Finally, a direct association between positive metacognitions about desire thinking and negative metacognitions about desire thinking would mark those occasions where target-achieving behaviour runs as an automatized schemata without the experience of craving. Results indicated a good model fit in the clinical sample and a variation in the model structure in the community sample. These findings provide further support for the application of metacognitive theory to desire thinking and craving in addictive behaviors. Copyright © 2014 Elsevier Ltd. All rights reserved.

Sexual desire in a nationally representative Danish population

DEFF Research Database (Denmark)

Eplov, Lene; Giraldi, Annamaria; Davidsen, Michael

2007-01-01

of self-reported sexual desire and decrease in sexual desire over a 5-year period was calculated for the two genders across age cohorts. Multiple logistic regression analysis was used to analyze the relationship between potential determinants and sexual desire. MAIN OUTCOME MEASURES: The frequency of self...

Sex Differences in Affect Behaviors, Desired Social Responses, and Accuracy at Understanding the Social Desires of Other People

Directory of Open Access Journals (Sweden)

Jacob M. Vigil

2008-07-01

Full Text Available I recently proposed a socio-relational framework that suggests that phenotypic variation in the expression of discrete affect behaviors (e.g., expressed anger vs. sadness may reflect two basic dimensions of behavioral response. The first dimension is the motivation to selectively attract or avoid interactions with different people. The second dimension is the behavioral display of either personal capacity or trustworthiness cues, often through the expression of dominant and submissive behaviors, respectively (Vigil, in press. Sex differences in affect behaviors (e.g., externalizing vs. internalizing displays may reflect developmental sensitivities to advertise capacity and trustworthiness cues somewhat differently, due to the unique social dynamics and relational constraints under which males and females evolved. In this study, I use a series of self-report questionnaires to examine two basic assumptions of the framework. The first assumption is that sex differences in nonverbal affect behaviors (aggression vs. crying reflect the desire for, and are effective for causing other people to either avoid or comfort the individual, respectively. I hypothesized that males would report a greater likelihood of responding to various distress moods with aggressive, rather than crying behaviors, and that males would desire, and believe male peers similarly desire distancing responses from others when feeling these moods. Instead, females were hypothesized to report more crying behaviors, and to desire, and believe female peers desire more comforting responses from others. The second assumption is that people are more accurate at inferring the desired social responses (i.e., to be left alone or comforted when experiencing distress of same-sex, rather than opposite-sex peers. I hypothesized that people's beliefs of same-sex peers are more similar to the self-reported desires of the male and female participants, themselves, than their beliefs of opposite

Effects of grain size and grain boundaries on defect production in nanocrystalline 3C-SiC

International Nuclear Information System (INIS)

Swaminathan, N.; Kamenski, Paul J.; Morgan, Dane; Szlufarska, Izabela

2010-01-01

Cascade simulations in single crystal and nanocrystalline SiC have been conducted in order to determine the role of grain boundaries and grain size on defect production during primary radiation damage. Cascades are performed with 4 and 10 keV silicon as the primary knock-on atom (PKA). Total defect production is found to increase with decreasing grain size, and this effect is shown to be due to increased production in grain boundaries and changing grain boundary volume fraction. In order to consider in-grain defect production, a new mapping methodology is developed to properly normalize in-grain defect production rates for nanocrystalline materials. It is shown that the presence of grain boundaries does not affect the total normalized in-grain defect production significantly (the changes are lower than ∼20%) for the PKA energies considered. Defect production in the single grain containing the PKA is also studied and found to increase for smaller grain sizes. In particular, for smaller grain sizes the defect production decreases with increasing distance from the grain boundary while for larger grain sizes the presence of the grain boundaries has negligible effect on defect production. The results suggest that experimentally observed changes in radiation resistance of nanocrystalline materials may be due to long-term damage evolution rather than changes in defect production rates from primary damage.

Grain dust and the lungs.

Science.gov (United States)

Chan-Yeung, M.; Ashley, M. J.; Grzybowski, S.

1978-01-01

Grain dust is composed of a large number of materials, including various types of grain and their disintegration products, silica, fungi, insects and mites. The clinical syndromes described in relation to exposure to grain dust are chronic bronchitis, grain dust asthma, extrinsic allergic alveolitis, grain fever and silo-filler's lung. Rhinitis and conjunctivitis are also common in grain workers. While the concentration and the quality of dust influence the frequency and the type of clinical syndrome in grain workers, host factors are also important. Of the latter, smoking is the most important factor influencing the frequency of chronic bronchitis. The role of atopy and of bronchial hyperreactivity in grain dust asthma has yet to be assessed. Several well designed studies are currently being carried out in North America not only to delineate the frequency of the respiratory abnormalities, the pathogenetic mechanisms and the host factors, but also to establish a meaningful threshold limit concentration for grain dust. Images p1272-a PMID:348288

Grain centre mapping - 3DXRD measurements of average grain characteristics

DEFF Research Database (Denmark)

Oddershede, Jette; Schmidt, Søren; Lyckegaard, Allan

2014-01-01

characteristics of each grain (such as their centre-of-mass positions, volumes, phases, orientations and/or elastic strain tensor components), while the exact locations of the grain boundaries are unknown. In the present chapter a detailed description of the setup and software for both grain centre mapping...... and the closely related boxscan method is given. Both validation experiments and applications for in situ studies of microstructural changes during plastic deformation and crack growth are given. Finally an outlook with special emphasis on coupling the measured results with modelling is given....

Grain Boundary Segregation in Metals

CERN Document Server

Lejcek, Pavel

2010-01-01

Grain boundaries are important structural components of polycrystalline materials used in the vast majority of technical applications. Because grain boundaries form a continuous network throughout such materials, their properties may limit their practical use. One of the serious phenomena which evoke these limitations is the grain boundary segregation of impurities. It results in the loss of grain boundary cohesion and consequently, in brittle fracture of the materials. The current book deals with fundamentals of grain boundary segregation in metallic materials and its relationship to the grain boundary structure, classification and other materials properties.

Choosing a Geothermal as an HVAC System.

Science.gov (United States)

Lensenbigler, John D.

2002-01-01

Describes the process of selecting and installing geothermal water source heat pumps for new residence halls at Johnson Bible College in Knoxville, Tennessee, including choosing the type of geothermal design, contractors, and interior equipment, and cost and payback. (EV)

Grain boundary migration

International Nuclear Information System (INIS)

Dimitrov, O.

1975-01-01

Well-established aspects of grain-boundary migration are first briefly reviewed (influences of driving force, temperature, orientation and foreign atoms). Recent developments of the experimental methods and results are then examined, by considering the various driving of resistive forces acting on grain boundaries. Finally, the evolution in the theoretical models of grain-boundary motion is described, on the one hand for ideally pure metals and, on the other hand, in the presence of solute impurity atoms [fr

Why doctors choose small towns: a developmental model of rural physician recruitment and retention.

Science.gov (United States)

Hancock, Christine; Steinbach, Alan; Nesbitt, Thomas S; Adler, Shelley R; Auerswald, Colette L

2009-11-01

Shortages of health care professionals have plagued rural areas of the USA for more than a century. Programs to alleviate them have met with limited success. These programs generally focus on factors that affect recruitment and retention, with the supposition that poor recruitment drives most shortages. The strongest known influence on rural physician recruitment is a "rural upbringing," but little is known about how this childhood experience promotes a return to rural areas, or how non-rural physicians choose rural practice without such an upbringing. Less is known about how rural upbringing affects retention. Through twenty-two in-depth, semi-structured interviews with both rural- and urban-raised physicians in northeastern California and northwestern Nevada, this study investigates practice location choice over the life course, describing a progression of events and experiences important to rural practice choice and retention in both groups. Study results suggest that rural exposure via education, recreation, or upbringing facilitates future rural practice through four major pathways. Desires for familiarity, sense of place, community involvement, and self-actualization were the major motivations for initial and continuing small-town residence choice. A history of strong community or geographic ties, either urban or rural, also encouraged initial rural practice. Finally, prior resilience under adverse circumstances was predictive of continued retention in the face of adversity. Physicians' decisions to stay or leave exhibited a cost-benefit pattern once their basic needs were met. These results support a focus on recruitment of both rural-raised and community-oriented applicants to medical school, residency, and rural practice. Local mentorship and "place-specific education" can support the integration of new rural physicians by promoting self-actualization, community integration, sense of place, and resilience. Health policy efforts to improve the physician

Phloem Transport Of Arsenic Species From Flag Leaf To Grain During Grain Filling

Science.gov (United States)

Strategies to reduce arsenic (As) in rice grain, below concentrations that represent a serious human health concern, require that the mechanisms of As accumulation within grain be established. Therefore, retranslocation of As species from flag leaves into filling rice grain was ...

Wood preservatives : choosing the right one

Science.gov (United States)

Matt Humphries; Stan Lebow; David Moses

2009-01-01

If you are having trouble choosing the right wood preservative system for your application, you are not alone. Dozens of products are available, some older types have gone out of use, others may be completely inappropriate for your application. As designers, specifiers and builders, you need to understand key information to be able to navigate through all of these...

Grain boundary motion and grain rotation in aluminum bicrystals: recent experiments and simulations

International Nuclear Information System (INIS)

Molodov, D A; Barrales-Mora, L A; Brandenburg, J-E

2015-01-01

The results of experimental and computational efforts over recent years to study the motion of geometrically different grain boundaries and grain rotation under various driving forces are briefly reviewed. Novel in-situ measuring techniques based on orientation contrast imaging and applied simulation techniques are described. The experimental results obtained on specially grown aluminum bicrystals are presented and discussed. Particularly, the faceting and migration behavior of low angle grain boundaries under the curvature force is addressed. In contrast to the pure tilt boundaries, which remained flat/faceted and immobile during annealing at elevated temperatures, mixed tilt-twist boundaries readily assumed a curved shape and steadily moved under the capillary force. Computational analysis revealed that this behavior is due to the inclinational anisotropy of grain boundary energy, which in turn depends on boundary geometry. The shape evolution and shrinkage kinetics of cylindrical grains with different tilt and mixed boundaries were studied by molecular dynamics simulations. The mobility of low angle <100> boundaries with misorientation angles higher than 10°, obtained by both the experiments and simulations, was found not to differ from that of the high angle boundaries, but decreases essentially with further decrease of misorientation. The shape evolution of the embedded grains in simulations was found to relate directly to results of the energy computations. Further simulation results revealed that the shrinkage of grains with pure tilt boundaries is accompanied by grain rotation. In contrast, grains with the tilt-twist boundaries composed of dislocations with the mixed edge-screw character do not rotate during their shrinkage. Stress driven boundary migration in aluminium bicrystals was observed to be coupled to a tangential translation of the grains. The activation enthalpy of high angle boundary migration was found to vary non-monotonically with

75 FR 76254 - Official Performance and Procedural Requirements for Grain Weighing Equipment and Related Grain...

Science.gov (United States)

2010-12-08

... DEPARTMENT OF AGRICULTURE Grain Inspection, Packers and Stockyards Administration 7 CFR Part 802 [Docket GIPSA-2010-FGIS-0012] RIN 0580-AB19 Official Performance and Procedural Requirements for Grain Weighing Equipment and Related Grain Handling Systems AGENCY: Grain Inspection, Packers and Stockyards...

78 FR 33224 - Safety Zone; Grain-Shipment and Grain-Shipment Assist Vessels, Columbia and Willamette Rivers

Science.gov (United States)

2013-06-04

... 1625-AA00 Safety Zone; Grain-Shipment and Grain-Shipment Assist Vessels, Columbia and Willamette Rivers... Guard is establishing a temporary safety zone around all inbound and outbound grain-shipment and grain-shipment assist vessels involved in commerce with the Columbia Grain facility on the Willamette River in...

78 FR 57261 - Safety Zone; Grain-Shipment and Grain-Shipment Assist Vessels, Columbia and Willamette Rivers

Science.gov (United States)

2013-09-18

... 1625-AA00 Safety Zone; Grain-Shipment and Grain-Shipment Assist Vessels, Columbia and Willamette Rivers... temporary safety zone around all inbound and outbound grain-shipment and grain-shipment assist vessels involved in commerce with the Columbia Grain facility on the Willamette River in Portland, OR, the United...

Grain destruction in interstellar shocks

International Nuclear Information System (INIS)

Seab, C.G.; Shull, J.M.

1984-01-01

One of the principal methods for removing grains from the Interstellar Medium is to destroy them in shock waves. Previous theoretical studies of shock destruction have generally assumed only a single size and type of grain; most do not account for the effect of the grain destruction on the structure of the shock. Earlier calculations have been improved in three ways: first, by using a ''complete'' grain model including a distribution of sizes and types of grains; second, by using a self-consistent shock structure that incorporates the changing elemental depletions as the grains are destroyed; and third, by calculating the shock-processed ultraviolet extinction curves for comparison with observations. (author)

Children's understanding of the distinction between intentions and desires.

Science.gov (United States)

Schult, Carolyn A

2002-01-01

Much of the previous research on children's understanding of intentions confounded intentions with desires. Intentions and desires are different, in that a desire can be satisfied in a number of ways, but an intention must be satisfied by carrying out the intended action. Children 3 through 7 years of age and adults were presented with situations in which intentions were satisfied but desires were not, or vice versa, in a story-comprehension task (N = 71) and a target-hitting game (N = 45). Although 3- and 4-year-olds were unable to differentiate desires and intentions consistently, 5- and 7-year-olds often matched the adult pattern. Younger children's difficulties in understanding intentions are discussed in terms of their use of a desire-outcome matching strategy and the representational complexities of intentions.

Selection of lactic acid bacteria from Brazilian kefir grains for potential use as starter or probiotic cultures.

Science.gov (United States)

Zanirati, Débora Ferreira; Abatemarco, Mário; Sandes, Sávio Henrique de Cicco; Nicoli, Jacques Robert; Nunes, Álvaro Cantini; Neumann, Elisabeth

2015-04-01

Brazilian kefir is a homemade fermented beverage that is obtained by incubating milk or a brown sugar solution with kefir grains that contribute their different microbiological compositions. It is highly important to isolate and characterize microorganisms from Brazilian kefir grains to obtain starter cultures for the industrial production of a standardized commercial kefir. Thus, the present study aimed to isolate lactic acid bacteria from eight kefir grains that were propagated in milk or sugar solutions from five different locations in Brazil and to select Lactobacillus isolates based on desirable in vitro probiotic properties. One hundred eight isolates from both substrates were identified by amplified ribosomal DNA restriction analysis and/or 16S rRNA gene sequencing and were determined to belong to the following 11 species from the genera: Lactococcus, Leuconostoc, Lactobacillus (L.), and Oenococcus. Leuconostoc mesenteroides, Lactobacillus kefiri, and Lactobacillus kefiranofaciens were isolated only from milk grains, whereas Lactobacillus perolens, Lactobacillus parafarraginis, Lactobacillus diolivorans, and Oenococcus oeni were isolated exclusively from sugar water grains. When the microbial compositions of four kefir grains were evaluated with culture-independent analyses, L. kefiranofaciens was observed to predominant in milk grains, whereas Lactobacillus hilgardii was most abundant in sugar water kefir. Unfortunately, L. hilgardii was not isolated from any grain, although this bacteria was detected with a culture-independent methodology. Fifty-two isolated Lactobacilli were tested for gastric juice and bile salt tolerance, antagonism against pathogens, antimicrobial resistance, and surface hydrophobicity. Three Lactobacillus strains (L. kefiranofaciens 8U, L. diolivorans 1Z, and Lactobacillus casei 17U) could be classified as potential probiotics. In conclusion, several lactic acid bacteria that could be used in combination with yeasts as starter

Performance Design as Education of Desire

DEFF Research Database (Denmark)

Pedersen, Michael Haldrup; Petersen, Franziska Bork

a discipline. Such a utopian PD would be an institution without borders. A mobilized and mobilizing institution enjoying an unruly, symbiotic or even parasitic metabolism with academic faculties (art, Geisteswissenschaft, technology, science) and sites for performance (bodies, home, workplace, city, planet......Confronted with the ubiquitous presence of preprogramed desires we propose Performance Design as a utopian institution for the education of desire. The utopian education of desire offers a potential and systematic creation of spaces that enable us “to imagine wanting something else, something...... qualitatively different” (Levitas 2013: 113). PD is uniquely suited to such an educational task, because it can function as a framework for not only designing alternative ways of being through affective interventions and estrangements, but also playing them out in performance. A modus operandi rather than...

Choosing Beauty and Feeling Good: How Attractive Product Design Increases Self-Affirmation

Directory of Open Access Journals (Sweden)

Townsend Claudia

2015-11-01

Full Text Available Consumers construct and maintain self-concepts through the use of branded consumer products. Yet product choice not only reflects an actual or desired image of the self but can also directly influence a person’s sense of self and even boost self-esteem. The aesthetics of a product is an attribute that has the power to transform how consumers perceive themselves. The mere act of choosing a beautiful product over a less good-looking one affirms people’s sense of self - who they are and what their values are. It goes beyond personal image building and self-presentation; its impact is also turned inwards. Choice of high design works as a unique form of affirmation. It works unconsciously, and high design may even be a particularly powerful form of affirmation precisely because its relationship to the self and one’s values is not obvious. And design is more powerful than other features in this respect. Comfort and ease of use, taste and brand do not have the same self-affirming quality as design. It is not simply that “treating” oneself or going for the pleasurable option has an affirming effect; it is specific to the choice of aesthetics.

Effects of thermomechanical processing on the recrystallization texture and grain size of Al-1%Si sputtering target material

DEFF Research Database (Denmark)

Li, X.R.; Xu, C.L.; Huang, T.L.

2015-01-01

An Al-1%Si alloy was solution treated and deformed by conventional cold rolling to different strains, followed by annealing at various temperatures until complete recrystallization. The microstructures of annealed samples were characterized by electron backscatter diffraction. It is found that un...... that under optimal conditions of cold rolling and annealing, the microstructure desired for sputtering target materials with fine, uniformly sized and randomly textured grains can be obtained for the Al-1%Si alloy....

Acting on One's Attitudes: The Role of a History of Choosing Situations.

Science.gov (United States)

DeBono, Kenneth G.; Snyder, Mark

1995-01-01

Three investigations examined the contributions of a history of choosing attitudinally relevant situations to attitude-behavior relations. Results point to an interrelated set of mechanisms, such as behavior, by which situational choice is linked to attitude-behavior relations. By choosing attitudinally relevant situations, individuals increase…

Developing the desire for change

International Nuclear Information System (INIS)

Gooch, B.G.

1987-01-01

This article leads the reader through the process of developing human potential by examining the assumption that development and change are synonymous concepts, and that many basic assumptions held regarding human reaction to change are false. If trainees proceed down the path filled with false premises, their task of improving performance is made more difficult. After resolution of basic truths concerning the nature of change, the article examines the process of creating a desire within individuals that will lead beyond motivation to activation. The article attempts to identify and discuss factors that are important to creating within individuals the desire to improve their performance

Factors Affecting Fertility Desires in the Philippines

Directory of Open Access Journals (Sweden)

Clarissa C. David

2014-12-01

Full Text Available Factors affecting fertility desires in the Philippines were examined using data from a national survey and from individual and group qualitative interviews involving 143 respondents. Fertility goals usually range from two to three children, but evidence suggests that they are dynamic and may change over a person’s lifetime. Qualitative interviews reveal that when negotiating about family size, it is the partner who wants more children that will be followed. A strong demand for gender balance among offspring creates a willingness to have more children than originally desired. Fertility goals increase over time among women. While those who start childbirth at a very young age successfully space their children, they tend to want larger families than those who start late. Initial fertility goals among women are generally low but may increase because of higher fertility desires among men, a demand for gender balance in children, and the desire for babies once their children have grown.

Plant Density Effect on Grain Number and Weight of Two Winter Wheat Cultivars at Different Spikelet and Grain Positions

Science.gov (United States)

Ni, Yingli; Zheng, Mengjing; Yang, Dongqing; Jin, Min; Chen, Jin; Wang, Zhenlin; Yin, Yanping

2016-01-01

In winter wheat, grain development is asynchronous. The grain number and grain weight vary significantly at different spikelet and grain positions among wheat cultivars grown at different plant densities. In this study, two winter wheat (Triticum aestivum L.) cultivars, ‘Wennong6’ and ‘Jimai20’, were grown under four different plant densities for two seasons, in order to study the effect of plant density on the grain number and grain weight at different spikelet and grain positions. The results showed that the effects of spikelet and grain positions on grain weight varied with the grain number of spikelets. In both cultivars, the single-grain weight of the basal and middle two-grain spikelets was higher at the 2nd grain position than that at the 1st grain position, while the opposite occurred in the top two-grain spikelets. In the three-grain spikelets, the distribution of the single-grain weight was different between cultivars. In the four-grain spikelets of Wennong6, the single-grain weight was the highest at the 2nd grain position, followed by the 1st, 3rd, and 4th grain positions. Regardless of the spikelet and grain positions, the single-grain weight was the highest at the 1st and 2nd grain positions and the lowest at the 3rd and 4th grain positions. Overall, plant density affected the yield by controlling the seed-setting characteristics of the tiller spike. Therefore, wheat yield can be increased by decreasing the sterile basal and top spikelets and enhancing the grain weight at the 3rd and 4th grain positions, while maintaining it at the 1st and 2nd grain positions on the spikelet. PMID:27171343

Choosing the Right Fireplace or Fireplace Retrofit Device

Science.gov (United States)

This page is about choosing a fireplace or fireplace retrofit device, including information on hang tags and a list of fireplaces and retrofits that have qualified under the voluntary fireplace program

Perceived partner fertility desires and influence on contraceptive use.

Science.gov (United States)

Gibbs, Susannah E; Moreau, Caroline

2017-08-01

Perceived discordance of fertility desires may be more common among couples with certain sociodemographic characteristics and may lead to lower contraceptive use. Using nationally representative data from adults ages 15-49 in France in 2010, we analysed associations between sociodemographic characteristics, perceived discordance of fertility desires and contraceptive use with design-based logistic regression. Only 8% of participants perceived discordant fertility desires while 92% perceived concordance with partner fertility desire. Discordance varied by age and relationship duration and by the presence of children from previous relationships. Perceived discordance was not associated with use of a hormonal or highly effective method. Beyond own intentions, perception of a partner's fertility desires was associated with using a highly effective method among participants using any method. Engaging men and couples in family planning programmes may be important for achieving both partners' desired fertility goals.

Dysregulated sexuality and high sexual desire: distinct constructs?

Science.gov (United States)

Winters, Jason; Christoff, Kalina; Gorzalka, Boris B

2010-10-01

The literature on dysregulated sexuality, whether theoretical, clinical or empirical, has failed to differentiate the construct from high sexual desire. In this study, we tested three hypotheses which addressed this issue. A sample of 6458 men and 7938 women, some of whom had sought treatment for sexual compulsivity, addiction or impulsivity, completed an online survey comprised of various sexuality measures. Men and women who reported having sought treatment scored significantly higher on measures of dysregulated sexuality and sexual desire. For men, women, and those who had sought treatment, dysregulated sexuality was associated with increased sexual desire. Confirmatory factor analysis supported a one-factor model, indicating that, in both male and female participants, dysregulated sexuality and sexual desire variables loaded onto a single underlying factor. The results of this study suggest that dysregulated sexuality, as currently conceptualized, labelled, and measured, may simply be a marker of high sexual desire and the distress associated with managing a high degree of sexual thoughts, feelings, and needs.

Sexual Desire and Arousal Disorders in Women

NARCIS (Netherlands)

Laan, Ellen; Both, Stephanie

2011-01-01

According to incentive motivation theory, sexual desire is the result of the interplay between a sensitive sexual response system and stimuli that activate the system. From this notion it follows that sexual desire is not a cause but a consequence of sexual arousal. The effects of hormones, somatic

Effect of grain alignment distribution on magnetic properties in (MM, Nd)-Fe-B sintered magnets

Science.gov (United States)

Yu, Xiaoqiang; Yue, Ming; Zhu, Minggang; Liu, Weiqiang; Li, Yuqing; Xi, Longlong; Li, Jiajie; Zhang, Jiuxing; Li, Wei

2018-03-01

H cj of (MM x Nd1-x )-Fe-B sintered magnets decreases distinctly with x increasing when misch metal (MM) content (x) ranges from 0.3 to 1. Practical application is taken into consideration so that the (MM0.6Nd0.4)-Fe-B components are chosen to analyze the changes in behavior of the magnetic properties. Both Magnet II and Magnet III belong to (MM0.6Nd0.4)-Fe-B sintered magnets, however, it should be noted that Magnet II is prepared by the single alloying method (SAM) and Magnet III is prepared by the double main phase alloy method (DMPAM). Core-shell structures of the magnets prepared by DMPAM can result in the higher H cj and lower knee-point coercivity (H k) compared with that by SAM. Furthermore, for Magnet II, the abnormal grain growth contributes to a better grain alignment and smaller distribution coefficient (σ) defined as the degree of grain alignment, which will enforce a higher tendency of the H cj decreasing and H k increasing. The expression of their normalized coercivity h(σ) is deduced by combining Gao’s starting field model with Kronmüller’s nucleation mechanism. Based on the overall h(σ) ~ σ curve, the best desirable h(σ) value is calculated when σ  =  0.09. Theoretically, for Magnet III, the resultant larger σ should be attributed to the more uniform grain alignment. In addition, the deviations of grain size distributions on the c-plane become more remarkable with more MM concentrates, which can be presented by SEM images. Meanwhile, by means of the pole figures, it is also verified that the grain alignment distribution becomes much more diverse with x increasing. Therefore, it can be predicted whether the grain alignment distribution is significant for H k and H cj of (MM x Nd1-x )-Fe-B sintered magnets (x  ≠  0.6) prepared by SAM/DMPAM or not.

Modelling of grain refinement driven by negative grain boundary energy

Czech Academy of Sciences Publication Activity Database

Fischer, F. D.; Zickler, G. A.; Svoboda, Jiří

2017-01-01

Roč. 97, č. 23 (2017), s. 1963-1977 ISSN 1478-6435 R&D Projects: GA ČR(CZ) GA15-06390S Institutional support: RVO:68081723 Keywords : grain refinement * grain nucleation * distribution concept * jump on distribution function Subject RIV: BJ - Thermodynamics OBOR OECD: Thermodynamics Impact factor: 1.505, year: 2016

Grain Interactions in Crystal Plasticity

International Nuclear Information System (INIS)

Boyle, K.P.; Curtin, W.A.

2005-01-01

The plastic response of a sheet metal is governed by the collective response of the underlying grains. Intragranular plasticity depends on intrinsic variables such as crystallographic orientation and on extrinsic variables such as grain interactions; however, the role of the latter is not well understood. A finite element crystal plasticity formulation is used to investigate the importance of grain interactions on intragranular plastic deformation in initially untextured polycrystalline aggregates. A statistical analysis reveals that grain interactions are of equal (or more) importance for determining the average intragranular deviations from the applied strain as compared to the orientation of the grain itself. Furthermore, the influence of the surrounding grains is found to extend past nearest neighbor interactions. It is concluded that the stochastic nature of the mesoscale environment must be considered for a proper understanding of the plastic response of sheet metals at the grain-scale

Self-Transcendence, Sexual Desire, and Sexual Frequency.

Science.gov (United States)

Costa, Rui Miguel; Pestana, José; Costa, David

2018-01-02

Self-forgetfulness is a facet of self-transcendence characterized by tendency to experience altered states of consciousness. We examined associations of self-forgetfulness with sexual desire and frequency. Two hundred sixty-one Portuguese men and women completed the self-forgetfulness subscale of the Temperament and Character Inventory-Revised, a measure of openness to experience, and a questionnaire on desired and actual frequency of vaginal intercourse, noncoital sex, and masturbation in the past month. In simple and partial correlations controlling for openness to experience and relationship status, women's self-forgetfulness correlated with desired frequency of intercourse and noncoital sex. For men, self-forgetfulness correlated with actual frequency of intercourse and noncoital sex.

Stabilisation of the grain market by the flexible use of grain for bioethanol

NARCIS (Netherlands)

Helming, J.F.M.; Pronk, A.; Woltjer, I.

2010-01-01

This report reviews whether the grain market and grain price can be stabilised by the variation of the use of grain in the EU-27's production of bioethanol. The time horizon of this study is 2020, whereby account is taken of the minimum 10% obligation for biofuel use in the EU-27. An economic

Inter-grain coupling and grain charge in dusty plasma Coulomb crystals

International Nuclear Information System (INIS)

Smith, M. A.; Goodrich, J.; Mohideen, U.; Rahman, H. U.; Rosenberg, M.; Mendis, D. A.

1998-01-01

We have studied the lattice structure and grain charge of dusty plasma Coulomb crystals formed in rectangular conductive grooves as a function of plasma temperature and density. The crystal appears to be made of mutually repulsive columns of grains confined by the walls of the groove. The columns are oriented along the direction of the electrode sheath electric field. A simple phenomenological model wherein the inter-grain spacing results from an attractive electric field induced dipole-dipole force balanced by a repulsive monopole Coulomb force is consistent with observed features of the Coulomb crystal

A constitutive model of nanocrystalline metals based on competing grain boundary and grain interior deformation mechanisms

KAUST Repository

Gurses, Ercan

2011-12-01

In this work, a viscoplastic constitutive model for nanocrystalline metals is presented. The model is based on competing grain boundary and grain interior deformation mechanisms. In particular, inelastic deformations caused by grain boundary diffusion, grain boundary sliding and dislocation activities are considered. Effects of pressure on the grain boundary diffusion and sliding mechanisms are taken into account. Furthermore, the influence of grain size distribution on macroscopic response is studied. The model is shown to capture the fundamental mechanical characteristics of nanocrystalline metals. These include grain size dependence of the strength, i.e., both the traditional and the inverse Hall-Petch effects, the tension-compression asymmetry and the enhanced rate sensitivity. © 2011 Elsevier B.V. All rights reserved.

Giant piezoelectric voltage coefficient in grain-oriented modified PbTiO3 material.

Science.gov (United States)

Yan, Yongke; Zhou, Jie E; Maurya, Deepam; Wang, Yu U; Priya, Shashank

2016-10-11

A rapid surge in the research on piezoelectric sensors is occurring with the arrival of the Internet of Things. Single-phase oxide piezoelectric materials with giant piezoelectric voltage coefficient (g, induced voltage under applied stress) and high Curie temperature (T c ) are crucial towards providing desired performance for sensing, especially under harsh environmental conditions. Here, we report a grain-oriented (with 95% texture) modified PbTiO 3 ceramic that has a high T c (364 °C) and an extremely large g 33 (115 × 10 -3  Vm N -1 ) in comparison with other known single-phase oxide materials. Our results reveal that self-polarization due to grain orientation along the spontaneous polarization direction plays an important role in achieving large piezoelectric response in a domain motion-confined material. The phase field simulations confirm that the large piezoelectric voltage coefficient g 33 originates from maximized piezoelectric strain coefficient d 33 and minimized dielectric permittivity ɛ 33 in [001]-textured PbTiO 3 ceramics where domain wall motions are absent.

Queer Theory and Discourses of Desire

OpenAIRE

Vasvári, Louise O.

2006-01-01

In her paper "Queer Theory and Discourses of Desire," Louise O. Vasvári proposes that the multiplicity of ways that language constructs -- or silences -- the socially constructed expression of erotic desire is a necessary complement to the study of gendered and of sexual identity. Vasvári contributes to queer theory and its subfield, queer linguistics, with the term "queer" understood as more inclusive and less male-oriented than "gay" where queer theory seeks to read between and outside the ...

DEVELOPMENT OF GRAIN MARKET IN UKRAINE

Directory of Open Access Journals (Sweden)

Aleksandr Maslak

2015-11-01

Full Text Available The subject of the research is a set of theoretical, methodological and practical fundamentals of organizational and economic functioning are integrated agricultural formations in the grain market of Ukraine. The methodological basis of research is the complex analysis of economic processes in the grain market in Ukraine and the world. During research we used such methods as method of systematization and comparison, statistic, economic, balance, constructive, target-oriented, and the methods of induction and deduction, analogy and comparison. Main aim of this article is the analysis of the situation on the grain market in Ukraine, defining the role of integrated agricultural formations in this market, improving the organizational-economic mechanism of its functioning, identifies ways of improving the competitiveness of Ukraine among world exporters of grain. Using results of the studies we examined trends grain market in Ukraine; influence of businesses in grain production; analysis of constraints to improve production efficiency of grain; defined domestic (internal needs of grain in Ukraine; assessed the status and expediency transformation infrastructure of the grain market of Ukraine; defined priority directions of development of the grain market in Ukraine. As a result of the preparation of articles, it is obtained the following conclusions: Ukraine is the world's largest producers and exporters of grain, the production of integrated agricultural units to a third of the total grain; technical condition of farm does not meet the needs of production; the domestic market is unable to provide the existing demand for grain production, contributing to export growth; Ukraine has a number of problems due to increased grain production, namely the shortage of storage capacity for the storage of grain, limited performance transshipment of grain in port elevators and imperfection and depreciation of transport systems; solving the existing problems is

Photoelectric charging of dust grains

International Nuclear Information System (INIS)

Ignatov, A. M.

2009-01-01

Photoemission from the surface of a dust grain in vacuum is considered. It is shown that the cutoff in the energy spectrum of emitted electrons leads to the formation of a steady-state electron cloud. The equation describing the distribution of the electric potential in the vicinity of a dust grain is solved numerically. The dust grain charge is found as a function of the grain size.

Gambling-machines and the Automation of Desire

Directory of Open Access Journals (Sweden)

César Albarrán Torres

2014-10-01

Full Text Available This paper deals with the relationship between gamblers and Electronic Gaming Machines (EGMs, which leads to the automation of desire through procedures. "Pokies", as EGMs are known in the Australian context, are both desiring­machines (Deleuze and Guattari and cross­platform media where digital gambling and videogame conventions and procedures intersect. I make a case that, as desiring­machines (entities that are defined by their connections, pokies and gamblers form couplings that generate assemblages, which are "passional", "a composition of desire" (Deleuze and Guattari. I also argue that pokies share aesthetic and procedural similarities with videogames and that the gameplay's objective is not always to merely win money, but to fulfil a desire to accomplish missions and embark on adventures. I also argue that these "missions" are related to chasing, the overarching procedure that defines EGM consumption and allows for the automation of gambler­pokie couplings. The aesthetics of most of these procedure­ images can be traced back to a postcolonial disposition over foreign lands, peoples and cultures ­faux Chinese and Aboriginal lore, exotic deserts, untamed jungles and Arctic landscapes that need to be conquered. This disposition echoes notions such as class­ related aspiration (desire and exotica. I analyse the imagery in some of the pokies that circulate in the New South Wales (Australia EGM market. This reading of Electronic Gaming Machines adds a ludic dimension to the analysis of a highly class­bound social practice that is part of a wider socioeconomic trend that points towards a new and contradictory consumption ethic. The application of videogame theory is absent in current discussions on poker machine interfaces and legislation, which generally focus on the figure of the pathological gambler and disregard the complexities of gambling platforms.

Grain Flow at High Stresses

Science.gov (United States)

McSaveney, M. J.

2015-12-01

The transport mechanism of rapid long-runout rock avalanches was a hotly debated topic when I came on the scene in 1967. So how come it is still debated today? My explanation is that it is the expected outcome of peer review, poor comprehension, and technological advances outpacing intellectual advances. Why think about the problem when we can model it! So let us think about the problem. Shreve thought that rock avalanches fell upon and trapped a layer of air. What physics was he thinking about? It is how feathers and tissue papers fall. When my rock avalanches fly, they fly like unlubricated bricks using the physics of projectiles and ballistics. But the main transport mechanism is not flight. The dominant impression from watching a rock avalanche in motion is of fluid flow, as Heim described it in 1882. A rock avalanche is a very large grain flow. Bagnold studied dispersive grain flows, but why should one assume that rock avalanches are dispersive grain flows as many do. The more common grain flow type is a dense grain flow and rock avalanches are dense grain flows in which the weight can and does generate very high stresses at grain contacts. Brittle rock deforms elastically up to its compressive strength, whereupon it breaks, releasing elastic strain as transient elastic strain (seismic energy to a seismologist, acoustic energy to a physicist). Melosh and others have shown that acoustic energy can fluidize a grain mass. There is no exotic physics behind grain flow at high stress. When grains break, the released elastic strain has to go somewhere, and it goes somewhere principally by transmission though grain contacts. Depending on the state of stress at the grain contact, the contact will pass the stress or will slip at conventional values of Coulomb friction. Enough thinking! A physical model of the entire process is too big for any laboratory. So whose numerical model will do it?

"Non-Coercive Rearrangements": Theorizing Desire in TESOL

Science.gov (United States)

Motha, Suhanthie; Lin, Angel

2014-01-01

In this article, the authors argue that at the center of every English language learning moment lies desire: desire for the language; for the identities that English represents; for capital, power, and images that are associated with English; for what is believed to lie beyond the doors that English unlocks. However, despite its centrality within…

The Self-Justifying Desire for Happiness

DEFF Research Database (Denmark)

Rodogno, Raffaele

2004-01-01

In Happiness, Tabensky equates the notion of happiness to Aristotelian eudaimonia. I shall claim that doing so amounts to equating two concepts that moderns cannot conceptually equate, namely, the good for a person and the good person or good life. In §2 I examine the way in which Tabensky deals...... with this issue and claim that his idea of happiness is as problematic for us moderns as is any translation of the notion of eudaimonia in terms of happiness. Naturally, if happiness understood as eudaimonia is ambiguous, so will be the notion of a desire for happiness, which we find at the core of Tabensky......'s whole project. In §3 I shall be concerned with another aspect of the desire for happiness; namely, its alleged self-justifying nature. I will attempt to undermine the idea that this desire is self-justifying by undermining the criterion on which Tabensky takes self-justifiability to rest, i.e. its...

The Desire for Impact

NARCIS (Netherlands)

A.J. Dur (Robert)

2004-01-01

textabstractThis paper explores the meaning and implications of the desire by workers for impact. We find that this impact motive can make firms in a competitive labor market act as monopsonists, lead workers with the same characteristics but at different firms to earn different wages, may alleviate

Impact fracture experiments simulating interstellar grain-grain collisions

Science.gov (United States)

Freund, Friedemann; Chang, Sherwood; Dickinson, J. Thomas

1990-01-01

Oxide and silicate grains condensing during the early phases of the formation of the solar system or in the outflow of stars are exposed to high partial pressures of the low-z elements H, C, N and O and their simple gaseous compounds. Though refractory minerals are nominally anhydrous and non-carbonate, if they crystallize in the presence of H2O, N2 and CO or CO2 gases, they dissolve traces of the gaseous components. The question arises: How does the presence of dissolved gases or gas components manifest itself when grain-grain collisions occur. What are the gases emitted when grains are shattered during a collision event. Researchers report on fracture experiments in ultrahigh vacuum (UHV, approximately less than 10 to the -8th power mbar) designed to measure (by means of a quadrupole mass spectrometer, QMS, with microns to ms time resolution) the emission of gases and vapors during and after impact (up to 1.5 sec). Two terrestrial materials were chosen which represent structural and compositional extremes: olivine (San Carlos, AZ), a densely packed Mg-Fe(2+) silicate from the upper mantle, available as 6 to 12 mm single crystals, and obsidian (Oregon), a structurally open, alkaline-SiO2-rich volcanic glass. In the olivine crystals OH- groups have been identified spectroscopically, as well as H2 molecules. Obsidian is a water-rich glass containing OH- besides H2O molecules. Olivine from the mantle often contains CO2, either as CO2-rich fluid in fluid inclusions or structurally dissolved or both. By analogy to synthetic glasses CO2 in the obsidian may be present in form of CO2 molecules in voids of molecular dimensions, or as carbonate anions, CO3(2-). No organic molecules have been detected spectroscopically in either material. Results indicate that refractory oxide/silicates which contain dissolved traces of the H2O and CO/CO2 components but no spectroscopically detectable traces of organics may release complex H-C-O (possibly H-C-N-O) molecules upon fracture

Microbiota of kefir grains

OpenAIRE

Tomislav Pogačić; Sanja Šinko; Šimun Zamberlin; Dubravka Samaržija

2013-01-01

Kefir grains represent the unique microbial community consisting of bacteria, yeasts, and sometimes filamentous moulds creating complex symbiotic community. The complexity of their physical and microbial structures is the reason that the kefir grains are still not unequivocally elucidated. Microbiota of kefir grains has been studied by many microbiological and molecular approaches. The development of metagenomics, based on the identification without cultivation, is opening new possibilities f...

Desire, Sexual Harassment, and Pedagogy in the University Classroom.

Science.gov (United States)

Jones, Alison

1996-01-01

Intense desires surface daily in university classrooms. Tensions and energies generated by students' and teachers' desires to teach, learn, and be admired can be erotically charged. Webs of desire, power, and vulnerability can form productive or destructive pedagogical relationships. The paper discusses the interplay of these factors in university…

Interplay between grain structure and protein adsorption on functional response of osteoblasts: ultrafine-grained versus coarse-grained substrates.

Science.gov (United States)

Misra, R D K; Nune, C; Pesacreta, T C; Somani, M C; Karjalainen, L P

2013-01-01

The rapid adsorption of proteins is the starting and primary biological response that occurs when a biomedical device is implanted in the physiological system. The biological response, however, depends on the surface characteristics of the device. Considering the significant interest in nano-/ultrafine surfaces and nanostructured coatings, we describe here, the interplay between grain structure and protein adsorption (bovine serum albumin: BSA) on osteoblasts functions by comparing nanograined/ultrafine-grained (NG/UFG) and coarse-grained (CG: grain size in the micrometer range) substrates by investigating cell-substrate interactions. The protein adsorption on NG/UFG surface was beneficial in favorably modulating biological functions including cell attachment, proliferation, and viability, whereas the effect was less pronounced on protein adsorbed CG surface. Additionally, immunofluorescence studies demonstrated stronger vinculin signals associated with actin stress fibers in the outer regions of the cells and cellular extensions on protein adsorbed NG/UFG surface. The functional response followed the sequence: NG/UFG(BSA) > NG/UFG > CG(BSA) > CG. The differences in the cellular response on bare and protein adsorbed NG/UFG and CG surfaces are attributed to cumulative contribution of grain structure and degree of hydrophilicity. The study underscores the potential advantages of protein adsorption on artificial biomedical devices to enhance the bioactivity and regulate biological functions. Copyright © 2012 Wiley Periodicals, Inc.

Best Practices and Processes for Choosing Research Priorities

Science.gov (United States)

Briscoe, M. G.

2015-12-01

Individuals, teams, departments, organizations, funding agencies, committees, and others all need to select desirable research priorities from many possible alternatives. One cannot do everything, one cannot afford everything, so what to select? Essays and reports since Weinberg (1963) have suggested criteria for choosing science topics. Popper et al (2000) reviewed and summarized all that had gone before in the subject of setting priorities; their main conclusions were that the underlying principles were the promotion of excellence and relevance. Sea Change (2015) from the NRC/OSB focused on four criteria. From most important to least important, they were transformative science, societal impacts, readiness, and partnership potential; these four criteria embodied the essence of the suggestions from Weinberg on, framed with the pragmatism of ORPISS (2007). Getting to the final set of priorities from many candidates involves a sequence of formal or informal processes, only the last of which is the application of the selected, weighted criteria. As developed by professional prioritization experts, the best-practice steps and processes are: Collection of input candidates from the community. Clustering and parsing/rephrasing of the input to eliminate redundancy and repetition and develop statements at a useful level of specificity. (NOTE:there is no counting of input to see how many times a particular topic was mentioned. The goal is diversity in the input, not a popularity contest.) Development of the selection criteria, and weighting the chosen criteria. Application of the selection criteria to the clustered/adjusted candidates. Finally, two more best practices: Do continuing sanity checks, to avoid losing sight of the goals of the effort. Resist the temptation to just sit around a table and talk about it to arrive at the priorities, which depends too much on who the specific members of the prioritization team are, and provides no transparency or explanation of why

Picking and Choosing the ‘Sovereign’Border

DEFF Research Database (Denmark)

Parker, Noel; Adler-Nissen, Rebecca

2012-01-01

We argue that the continued persistence of borders is an effect of their constitutive role for the many dimensions of a social particular. States cannot choose to have a border; but they can and do make choices amongst the materials available on the various planes of inscription for bordering. Fo...

Whole grains and health: attitudes to whole grains against a prevailing background of increased marketing and promotion.

Science.gov (United States)

McMackin, Elaine; Dean, Moira; Woodside, Jayne V; McKinley, Michelle C

2013-04-01

To explore current awareness and perceptions of whole grain foods and perceived barriers and facilitators of whole grain consumption. Focus groups were conducted to investigate consumer attitudes to whole grains. Discussions were transcribed verbatim and analysed thematically. Discussions were held throughout Northern Ireland with adults who were at least partly responsible for food shopping. Seven focus groups were held (n 43; thirty-three females, ten males). All participants were aware of the term 'whole grain' and had a basic level of awareness of their health benefits. Prominent barriers and facilitators of whole grain intake were related to perceptions of the sensory properties (most dominant factor) of whole grains; knowledge of how to locate, identify and use whole grains; and awareness of the health benefits, perceived cost and family influences. Parents of young children appeared to be altruistically motivated with many stating they wanted to ensure their children consumed whole grains in order to establish good eating habits. Participants were generally aware of the term 'whole grain'; however, even against a background of increased availability and promotion of whole grain foods, many key barriers to whole grain consumption were still evident. Alongside general education efforts, opportunities and challenges exist for the food industry to develop novel, but affordable, food products that are able to deliver whole grains in a wide variety of forms, including whole grains 'in disguise' for those who are most resistant to change.

Desire thinking as a confounder in the relationship between mindfulness and craving: Evidence from a cross-cultural validation of the Desire Thinking Questionnaire.

Science.gov (United States)

Chakroun-Baggioni, Nadia; Corman, Maya; Spada, Marcantonio M; Caselli, Gabriele; Gierski, Fabien

2017-10-01

Desire thinking and mindfulness have been associated with craving. The aim of the present study was to validate the French version of the Desire Thinking Questionnaire (DTQ) and to investigate the relationship between mindfulness, desire thinking and craving among a sample of university students. Four hundred and ninety six university students completed the DTQ and measures of mindfulness, craving and alcohol use. Results from confirmatory factor analyses showed that the two-factor structure proposed in the original DTQ exhibited suitable goodness-of-fit statistics. The DTQ also demonstrated good internal reliability, temporal stability and predictive validity. A set of linear regressions revealed that desire thinking had a confounding effect in the relationship between mindfulness and craving. The confounding role of desire thinking in the relationship between mindfulness and craving suggests that interrupting desire thinking may be a viable clinical option aimed at reducing craving. Copyright © 2017 Elsevier B.V. All rights reserved.

Effects by the microstructure after hot and cold rolling on the texture and grain size after final annealing of ferritic non-oriented FeSi electrical steel

Science.gov (United States)

Schneider, J.; Stöcker, A.; Franke, A.; Kawalla, R.

2018-04-01

The magnetic properties of fully processed non-oriented FeSi electrical steel are characterized by their magnetization behavior and specific magnetic losses. The magnetic properties are determined by the texture and microstructure. Less gamma fiber intensity and a high intensity of preferable texture components, especially cube fiber texture, are desirable to obtain an excellent magnetizing behavior. Furthermore, large grain sizes are necessary to reach low values of the specific magnetic losses. The fabrication route of the fully processed non-oriented electrical steels comprises a heavy cold rolling of the hot rolled material before final annealing. To fulfill the requirements on large grain size for low loss materials, grain growth, which appears after complete recrystallization, plays an important role. In this paper we will analyze the influence of different microstructures of the hot strip and the resulting microstructure after cold rolling on the appearance of recrystallization and grain growth after final annealing. The evolution of texture reflects the present ongoing softening processes: recovery, recrystallization and finally grain growth at the given annealing conditions. It will be shown that the image of texture at recrystallization is remarkable different from the texture at grain growth. Substantially grain growth is obtained at lower annealing temperatures for an optimum microstructure of the hot rolled material.

Effects by the microstructure after hot and cold rolling on the texture and grain size after final annealing of ferritic non-oriented FeSi electrical steel

Directory of Open Access Journals (Sweden)

J. Schneider

2018-04-01

Full Text Available The magnetic properties of fully processed non-oriented FeSi electrical steel are characterized by their magnetization behavior and specific magnetic losses. The magnetic properties are determined by the texture and microstructure. Less gamma fiber intensity and a high intensity of preferable texture components, especially cube fiber texture, are desirable to obtain an excellent magnetizing behavior. Furthermore, large grain sizes are necessary to reach low values of the specific magnetic losses. The fabrication route of the fully processed non-oriented electrical steels comprises a heavy cold rolling of the hot rolled material before final annealing. To fulfill the requirements on large grain size for low loss materials, grain growth, which appears after complete recrystallization, plays an important role. In this paper we will analyze the influence of different microstructures of the hot strip and the resulting microstructure after cold rolling on the appearance of recrystallization and grain growth after final annealing. The evolution of texture reflects the present ongoing softening processes: recovery, recrystallization and finally grain growth at the given annealing conditions. It will be shown that the image of texture at recrystallization is remarkable different from the texture at grain growth. Substantially grain growth is obtained at lower annealing temperatures for an optimum microstructure of the hot rolled material.

Grain boundary and grain interior conduction in {gamma}'-Bi{sub 2}MoO{sub 6}

Energy Technology Data Exchange (ETDEWEB)

Vera, C.M.C. [Laboratorio de Peliculas Delgadas, Facultad de Ingenieria, Universidad de Buenos Aires, Paseo Colon 850, 1063 Buenos Aires (Argentina)]. E-mail: cvera@fi.uba.ar; Aragon, R. [Laboratorio de Peliculas Delgadas, Facultad de Ingenieria, Universidad de Buenos Aires, Paseo Colon 850, 1063 Buenos Aires (Argentina); CINSO, CONICET, CITEFA, Lasalle 4397, Villa Martelli, Buenos Aires (Argentina)

2005-07-25

Impedance spectroscopy of fine grained (<10 {mu}m) {gamma}'-Bi{sub 2}MoO{sub 6} samples, in the frequency range of 0.1 Hz-250 kHz, relevant to sensor applications, up to 800 deg. C, has been used to characterize grain boundary and grain interior contributions to conduction. Above 500 deg. C, the grain boundary contribution is no longer rate limiting and conduction is dominated by the grain interior component. The corresponding activation energies are 0.98 eV for grain boundary and 0.73 eV for grain interior components. The weak dependence of conductivity on oxygen partial pressure below 500 deg. C can be attributed to electrode-electrolyte interface phenomena, whereas the robust response to ethanol is commensurate with changes in intrinsic ionic conductivity.

Solvent-molecule-mediated manipulation of crystalline grains for efficient planar binary lead and tin triiodide perovskite solar cells

Science.gov (United States)

Zhu, Leize; Yuh, Brian; Schoen, Stefan; Li, Xinpei; Aldighaithir, Mohammed; Richardson, Beau J.; Alamer, Ahmed; Yu, Qiuming

2016-03-01

Binary lead and tin perovskites offer the benefits of narrower band gaps for broader adsorption of solar spectrum and better charge transport for higher photocurrent density. Here, we report the growth of large, smooth crystalline grains of bianry lead and tin triiodide perovskite films via a two-step solution process with thermal plus solvent vapor-assisted thermal annealing. The crystalline SnxPb1-xI2 films formed in the first step served as the templates for the formation of crystalline CH3NH3SnxPb1-xI3 films during the second step interdiffusion of methylammonium iodide (MAI). Followed by dimethylsulfoxide (DMSO) vapor-assisted thermal annealing, small, faceted perovskite grains grew into large, smooth grains via the possible mechanism involving bond breaking and reforming mediated by DMSO solvent molecules. The absorption onset was extended to 950 and 1010 nm for the CH3NH3SnxPb1-xI3 perovskites with x = 0.1 and 0.25, respectively. The highest PCE of 10.25% was achieved from the planar perovskite solar cell with the CH3NH3Sn0.1Pb0.9I3 layer prepared via the thermal plus DMSO vapor-assisted thermal annealing. This research provides a way to control and manipulate film morphology, grain size, and especially the distribution of metal cations in binary metal perovskite layers, which opens an avenue to grow perovskite materials with desired properties to enhance device performance.Binary lead and tin perovskites offer the benefits of narrower band gaps for broader adsorption of solar spectrum and better charge transport for higher photocurrent density. Here, we report the growth of large, smooth crystalline grains of bianry lead and tin triiodide perovskite films via a two-step solution process with thermal plus solvent vapor-assisted thermal annealing. The crystalline SnxPb1-xI2 films formed in the first step served as the templates for the formation of crystalline CH3NH3SnxPb1-xI3 films during the second step interdiffusion of methylammonium iodide (MAI

Sexual Desire Disorders

OpenAIRE

Montgomery, Keith A.

2008-01-01

Hypoactive sexual desire disorder (HSDD) and sexual aversion disorder (SAD) are an under-diagnosed group of disorders that affect men and women. Despite their prevalence, these two disorders are often not addressed by healthcare providers and patients due their private and awkward nature. As physicians, we need to move beyond our own unease in order to adequately address our patients’ sexual problems and implement appropriate treatment. Using the Sexual Response Cycle as the model of the phys...

A UNIFIED MODEL OF GRAIN ALIGNMENT: RADIATIVE ALIGNMENT OF INTERSTELLAR GRAINS WITH MAGNETIC INCLUSIONS

Energy Technology Data Exchange (ETDEWEB)

Hoang, Thiem [Canadian Institute for Theoretical Astrophysics, University of Toronto, 60 St. George Street, Toronto, ON M5S 3H8 (Canada); Lazarian, A. [Department of Astronomy, University of Wisconsin-Madison (United States)

2016-11-10

The radiative torque (RAT) alignment of interstellar grains with ordinary paramagnetic susceptibilities has been supported by earlier studies. The alignment of such grains depends on the so-called RAT parameter q {sup max}, which is determined by the grain shape. In this paper, we elaborate on our model of RAT alignment for grains with enhanced magnetic susceptibility due to iron inclusions, such that RAT alignment is magnetically enhanced, which we term the MRAT mechanism. Such grains can be aligned with high angular momentum at the so-called high- J attractor points, achieving a high degree of alignment. Using our analytical model of RATs, we derive the critical value of the magnetic relaxation parameter δ {sub m} to produce high- J attractor points as functions of q {sup max} and the anisotropic radiation angle relative to the magnetic field ψ . We find that if about 10% of the total iron abundance present in silicate grains is forming iron clusters, this is sufficient to produce high- J attractor points for all reasonable values of q {sup max}. To calculate the degree of grain alignment, we carry out numerical simulations of MRAT alignment by including stochastic excitations from gas collisions and magnetic fluctuations. We show that large grains can achieve perfect alignment when the high- J attractor point is present, regardless of the values of q {sup max}. Our obtained results pave the way for the physical modeling of polarized thermal dust emission as well as magnetic dipole emission. We also find that millimeter-sized grains in accretion disks may be aligned with the magnetic field if they are incorporated with iron nanoparticles.

Selection of common bean lines with high grain yield and high grain calcium and iron concentrations

Directory of Open Access Journals (Sweden)

Nerinéia Dalfollo Ribeiro

2014-02-01

Full Text Available Genetic improvement of common bean nutritional quality has advantages in marketing and can contribute to society as a food source. The objective of this study was to evaluate the genetic variability for grain yield, calcium and iron concentrations in grains of inbred common bean lines obtained by different breeding methods. For this, 136 F7 inbred lines were obtained using the Pedigree method and 136 F7 inbred lines were obtained using the Single-Seed Descent (SSD method. The lines showed genetic variability for grain yield, and concentrations of calcium and iron independently of the method of advancing segregating populations. The Pedigree method allows obtaining a greater number of lines with high grain yield. Selection using the SSD method allows the identification of a larger number of lines with high concentrations of calcium and iron in grains. Weak negative correlations were found between grain yield and calcium concentration (r = -0.0994 and grain yield and iron concentration (r = -0.3926. Several lines show genetic superiority for grain yield and concentrations of calcium and iron in grains and their selection can result in new common bean cultivars with high nutritional quality.

The Stability of Social Desirability: A Latent Change Analysis.

Science.gov (United States)

Haberecht, Katja; Schnuerer, Inga; Gaertner, Beate; John, Ulrich; Freyer-Adam, Jennis

2015-08-01

Social desirability has been shown to be stable in samples with higher school education. However, little is known about the stability of social desirability in more heterogeneous samples differing in school education. This study aimed to investigate the stability of social desirability and which factors predict interindividual differences in intraindividual change. As part of a randomized controlled trial, 1,243 job seekers with unhealthy alcohol use were systematically recruited at three job agencies. A total of 1,094 individuals (87.8%) participated in at least one of two follow-ups (6 and 15 months after baseline) and constitute this study's sample. The Social Desirability Scale-17 was applied. Two latent change models were conducted: Model 1 tested for interindividual differences in intraindividual change of social desirability between both follow-ups; Model 2 included possible predictors (age, sex, education, current employment status) of interindividual differences in intraindividual change. Model 1 revealed a significant decrease of social desirability over time. Model 2 revealed school education to be the only significant predictor of change. These findings indicate that stability of social desirability may depend on school education. It may not be as stable in individuals with higher school education as in individuals with lower education. © 2014 Wiley Periodicals, Inc.

A device for routine studies of nuclear track annealing in mineral grains

International Nuclear Information System (INIS)

Jha, R.; Lal, D.

1984-01-01

For studies of annealing of nuclear tracks in common rock-forming minerals, we have devised a simple heating system that provides a highly stable hot environment characterized by a large temperature gradient. The temperature can be maintained at the desired values within +- 2 deg C over a period of several months. The system allows placing of samples at eight different temperature points in the temperature range of 350 to 550 deg C in a single setting. This range essentially encompasses the entire temperature range normally used in laboratory track annealing of mineral grains with annealing duration of a few minutes to a couple of months. Lower as well as higher temperatures and different ranges are possible by changing the material used for the heating system and its geometry. However, for annealing at high temperature, and for short duration we found that it is more convenient to heat samples in the appropriate region of the cone of a large gas flame. We present, as an example, results of cosmic-ray track annealing studies in hypersthene grains from the Johnstown meteorite. The simplicity and reproducibility of the technique allows an in-depth study of annealing characteristics of different minerals. (author)

Kansas Agents Study Grain Marketing

Science.gov (United States)

Schoeff, Robert W.

1973-01-01

Author is an extension specialist in feed and grain marketing for Kansas State University. He describes a tour set up to educate members of the Kansas Grain and Feed Dealers' Association in the area of grain marketing and exporting. (GB)

Advection-diffusion model for normal grain growth and the stagnation of normal grain growth in thin films

International Nuclear Information System (INIS)

Lou, C.

2002-01-01

An advection-diffusion model has been set up to describe normal grain growth. In this model grains are divided into different groups according to their topological classes (number of sides of a grain). Topological transformations are modelled by advective and diffusive flows governed by advective and diffusive coefficients respectively, which are assumed to be proportional to topological classes. The ordinary differential equations governing self-similar time-independent grain size distribution can be derived analytically from continuity equations. It is proved that the time-independent distributions obtained by solving the ordinary differential equations have the same form as the time-dependent distributions obtained by solving the continuity equations. The advection-diffusion model is extended to describe the stagnation of normal grain growth in thin films. Grain boundary grooving prevents grain boundaries from moving, and the correlation between neighbouring grains accelerates the stagnation of normal grain growth. After introducing grain boundary grooving and the correlation between neighbouring grains into the model, the grain size distribution is close to a lognormal distribution, which is usually found in experiments. A vertex computer simulation of normal grain growth has also been carried out to make a cross comparison with the advection-diffusion model. The result from the simulation did not verify the assumption that the advective and diffusive coefficients are proportional to topological classes. Instead, we have observed that topological transformations usually occur on certain topological classes. This suggests that the advection-diffusion model can be improved by making a more realistic assumption on topological transformations. (author)

Executive Function and the Development of Belief-Desire Psychology

Science.gov (United States)

Rakoczy, Hannes

2010-01-01

In two studies children's performance on tasks requiring the ascription of beliefs and desires was investigated in relation to their executive function. Study 1 (n = 80) showed that 3- and 4-year-olds were more proficient at ascribing subjective, mutually incompatible desires and desire-dependent emotions to two persons than they were at ascribing…

How to Choose the Best Skin Care Products

Science.gov (United States)

... Skin Care Products How to Choose the Best Skin Care Products Looking for a quick fix to erase wrinkles, ... available, the beauty aisle can be overwhelming. Some skin care products are overpriced and make claims they can’t ...

Becoming-Teachers: Desiring Students

Science.gov (United States)

Mercieca, Duncan

2012-01-01

This article proposes a reading of the lives of teachers through a Deleuzian-Guattarian materialistic approach. By asking the question "what kind of life do teachers live?" this article reminds us that teachers sometimes welcome the imposed policies, procedures and programmes, the consequences of which remove them from students. This desire is…

Policy options for non-grain bioethanol in China: Insights from an economy-energy-environment CGE model

International Nuclear Information System (INIS)

Ge, Jianping; Lei, Yalin

2017-01-01

The Chinese government has been issuing numerous incentive policies to promote non-grain bioethanol development to address the problem of excessive energy consumption and environmental pollution. In this study, we divide the incentive policies into five categories: subsidies on bioethanol production, non-grain feedstocks planting, marginal land reclamation and utilization, bioethanol consumption in more cities, and consumption tax on gasoline use. The objective of the paper is to evaluate and compare the economic, energy, and environmental effects of the incentive policies to help the government choose the optimal policies to promote bioethanol in China. The results show that subsidies on bioethanol production and consumption can boost GDP, and simultaneously, decrease crude oil and gasoline consumption, and reduce CO_2 emissions. However, the increase in bioethanol consumption is combined with the rise in coal and electricity consumption. Subsidies on bioethanol production can promote GDP and reduce energy consumption and CO_2 emission but have less effect on bioethanol development than that under the scenario of subsides on bioethanol consumption. On the contrary, although subsidies on non-grain feedstocks planting and marginal land reclamation and utilization can improve macro-economy but have a negative effect on energy saving and CO_2 emission reduction. Therefore, appropriate subsidies on bioethanol production and consumption can promote bioethanol consumption with economic, energy and environmental benefits. The Chinese government should further pay more attention to the coordination of different policy options by policy tools and intensities. - Highlights: • Non-grain bioethanol incentive policy is divided into supply and demand perspectives. • China's bioethanol CGE model is constructed. • Demand incentives have largest positive effects on GDP. • Demand incentives have better effects on energy saving and emission reduction. • Subsidies on

Origins of amorphous interstellar grains

International Nuclear Information System (INIS)

Hasegawa, H.

1984-01-01

The existence of amorphous interstellar grains has been suggested from infrared observations. Some carbon stars show the far infrared emission with a lambda -1 wavelength dependence. Far infrared emission supposed to be due to silicate grains often show the lambda -1 wavelength dependence. Mid infrared spectra around 10 μm have broad structure. These may be due to the amorphous silicate grains. The condition that the condensed grains from the cosmic gas are amorphous is discussed. (author)

Tracer concentration contours in grain lattice and grain boundary diffusion

International Nuclear Information System (INIS)

Kim, Y. S.; Olander, D. R.

1997-01-01

Grain boundary diffusion plays a significant role in fission gas release, which is one of the crucial processes dominating nuclear fuel performance. Gaseous fission products such as Xe and Kr generated during nuclear fission have to diffuse in the grain lattice and the boundary inside fuel pellets before they reach the open spaces in a fuel rod. These processes can be studied by 'tracer diffusion' techniques, by which grain boundary diffusivity can be estimated and directly used for low burn-up fission gas release analysis. However, only a few models accounting for the both processes are available and mostly handle them numerically due to mathematical complexity. Also the numerical solution has limitations in a practical use. In this paper, an approximate analytical solution in case of stationary grain boundary in a polycrystalline solid is developed for the tracer diffusion techniques. This closed-form solution is compared to available exact and numerical solutions and it turns out that it makes computation not only greatly easier but also more accurate than previous models. It can be applied to theoretical modelings for low burn-up fission gas release phenomena and experimental analyses as well, especially for PIE (post irradiation examination). (author)

Ferroelectric domain continuity over grain boundaries

DEFF Research Database (Denmark)

Mantri, Sukriti; Oddershede, Jette; Damjanovic, Dragan

2017-01-01

Formation and mobility of domain walls in ferroelectric materials is responsible for many of their electrical and mechanical properties. Domain wall continuity across grain boundaries has been observed since the 1950's and is speculated to affect the grain boundary-domain interactions, thereby...... impacting macroscopic ferroelectric properties in polycrystalline systems. However detailed studies of such correlated domain structures across grain boundaries are limited. In this work, we have developed the mathematical requirements for domain wall plane matching at grain boundaries of any given...... orientation. We have also incorporated the effect of grain boundary ferroelectric polarization charge created when any two domains meet at the grain boundary plane. The probability of domain wall continuity for three specific grain misorientations is studied. Use of this knowledge to optimize processing...

Cloud Computing and the Power to Choose

Science.gov (United States)

Bristow, Rob; Dodds, Ted; Northam, Richard; Plugge, Leo

2010-01-01

Some of the most significant changes in information technology are those that have given the individual user greater power to choose. The first of these changes was the development of the personal computer. The PC liberated the individual user from the limitations of the mainframe and minicomputers and from the rules and regulations of centralized…

Branching-induced grain boundary evolution during directional solidification of columnar dendritic grains

International Nuclear Information System (INIS)

Guo, Chunwen; Li, Junjie; Yu, Honglei; Wang, Zhijun; Lin, Xin; Wang, Jincheng

2017-01-01

We present an investigation of secondary and tertiary branching behavior in diverging grain boundaries (GBs) between two columnar dendritic grains with different crystallographic orientations, both by two-dimensional phase-field simulations and thin-sample experiments. The stochasticity of the GB trajectories and the statistically averaged GB orientations were analyzed in detail. The side-branching dynamics and subsequent branch competition behaviors found in the simulations agreed well with the experimental results. When the orientations of two grains are given, the experimental results indicated that the average GB orientation was independent of the pulling velocity in the dendritic growth regime. The simulation and experimental results, as well as the results reported in the literature exhibit a uniform relation between the percentage of the whole gap region occupied by the favorably oriented grain and the difference in the absolute values of the secondary arm growth directions of the two competitive grains. By describing such a uniform relation with a simple fitting equation, we proposed a simple analytical model for the GB orientation at diverging GBs, which gives a more accurate description of GB orientation selection than the existing models.

Maintaining sexual desire in intimate relationships: the importance of approach goals.

Science.gov (United States)

Impett, Emily At; Strachman, Amy; Finkel, Eli J; Gable, Shelly L

2008-05-01

Three studies tested whether adopting strong (relative to weak) approach goals in relationships (i.e., goals focused on the pursuit of positive experiences in one's relationship such as fun, growth, and development) predict greater sexual desire. Study 1 was a 6-month longitudinal study with biweekly assessments of sexual desire. Studies 2 and 3 were 2-week daily experience studies with daily assessments of sexual desire. Results showed that approach relationship goals buffered against declines in sexual desire over time and predicted elevated sexual desire during daily sexual interactions. Approach sexual goals mediated the association between approach relationship goals and daily sexual desire. Individuals with strong approach goals experienced even greater desire on days with positive relationship events and experienced less of a decrease in desire on days with negative relationships events than individuals who were low in approach goals. In two of the three studies, the association between approach relationship goals and sexual desire was stronger for women than for men. Implications of these findings for maintaining sexual desire in long-term relationships are discussed. (c) 2008 APA, all rights reserved

Fine mapping and identification of a novel locus qGL12.2 control grain length in wild rice (Oryza rufipogon Griff.).

Science.gov (United States)

Qi, Lan; Ding, Yingbin; Zheng, Xiaoming; Xu, Rui; Zhang, Lizhen; Wang, Yanyan; Wang, Xiaoning; Zhang, Lifang; Cheng, Yunlian; Qiao, Weihua; Yang, Qingwen

2018-04-19

A wild rice QTL qGL12.2 for grain length was fine mapped to an 82-kb interval in chromosome 12 containing six candidate genes and none was reported previously. Grain length is an important trait for yield and commercial value in rice. Wild rice seeds have a very slender shape and have many desirable genes that have been lost in cultivated rice during domestication. In this study, we identified a quantitative trait locus, qGL12.2, which controls grain length in wild rice. First, a wild rice chromosome segment substitution line, CSSL41, was selected that has longer glume and grains than does the Oryza sativa indica cultivar, 9311. Next, an F 2 population was constructed from a cross between CSSL41 and 9311. Using the next-generation sequencing combined with bulked-segregant analysis and F 3 recombinants analysis, qGL12.2 was finally fine mapped to an 82-kb interval in chromosome 12. Six candidate genes were found, and no reported grain length genes were found in this interval. Using scanning electron microscopy, we found that CSSL41 cells are significantly longer than those of 9311, but there is no difference in cell widths. These data suggest that qGL12.2 is a novel gene that controls grain cell length in wild rice. Our study provides a new genetic resource for rice breeding and a starting point for functional characterization of the wild rice GL gene.

The effect of grain refinement and silicon content on grain formation in hypoeutectic Al-Si alloys

Energy Technology Data Exchange (ETDEWEB)

Lee, Y.C.; Dahle, A.K.; StJohn, D.H.; Hutt, J.E.C. [Queensland Univ., Brisbane (Australia). Dept. of Mining, Minerals and Mater. Eng.

1999-01-15

The effect of increasing the amount of added grain refiner on grain size and morphology has been investigated for a range of hypoeutectic Al-Si alloys. The results show a transition in grain size at a silicon concentration of about 3 wt% in unrefined alloys; the grain size decreasing with silicon content before the transition, and increasing beyond the transition point. A change in morphology also occurs with increased silicon content. The addition of grain refiner leads to greater refinement for silicon contents below the transition point than for those contents above the transition point, while the transition point seems to remain unchanged. The slope of the grain size versus silicon content curve after the transition seems to be unaffected by the degree of grain refinement. The results are related to the competitive processes of nucleation and constitutional effects during growth and their impact on nucleation kinetics. (orig.) 13 refs.

Compaction of cereal grain

OpenAIRE

Wychowaniec, J.; Griffiths, I.; Gay, A.; Mughal, A.

2013-01-01

We report on simple shaking experiments to measure the compaction of a column of Firth oat grain. Such grains are elongated anisotropic particles with a bimodal polydispersity. In these experiments, the particle configurations start from an initially disordered, low-packing-fraction state and under vertical shaking evolve to a dense state with evidence of nematic-like structure at the surface of the confining tube. This is accompanied by an increase in the packing fraction of the grain.

Sexual desire in trans persons: associations with sex reassignment treatment.

Science.gov (United States)

Wierckx, Katrien; Elaut, Els; Van Hoorde, Birgit; Heylens, Gunter; De Cuypere, Griet; Monstrey, Stan; Weyers, Steven; Hoebeke, Piet; T'Sjoen, Guy

2014-01-01

Sex steroids and genital surgery are known to affect sexual desire, but little research has focused on the effects of cross-sex hormone therapy and sex reassignment surgery on sexual desire in trans persons. This study aims to explore associations between sex reassignment therapy (SRT) and sexual desire in a large cohort of trans persons. A cross-sectional single specialized center study including 214 trans women (male-to-female trans persons) and 138 trans men (female-to-male trans persons). Questionnaires assessing demographics, medical history, frequency of sexual desire, hypoactive sexual desire disorder (HSDD), and treatment satisfaction. In retrospect, 62.4% of trans women reported a decrease in sexual desire after SRT. Seventy-three percent of trans women never or rarely experienced spontaneous and responsive sexual desire. A third reported associated personal or relational distress resulting in a prevalence of HSDD of 22%. Respondents who had undergone vaginoplasty experienced more spontaneous sexual desire compared with those who planned this surgery but had not yet undergone it (P = 0.03). In retrospect, the majority of trans men (71.0%) reported an increase in sexual desire after SRT. Thirty percent of trans men never or rarely felt sexual desire; 39.7% from time to time, and 30.6% often or always. Five percent of trans men met the criteria for HSDD. Trans men who were less satisfied with the phalloplasty had a higher prevalence of HSDD (P = 0.02). Trans persons who were more satisfied with the hormonal therapy had a lower prevalence of HSDD (P = 0.02). HSDD was more prevalent in trans women compared with trans men. The majority of trans women reported a decrease in sexual desire after SRT, whereas the opposite was observed in trans men. Our results show a significant sexual impact of surgical interventions and both hormonal and surgical treatment satisfaction on the sexual desire in trans persons. © 2013 International Society for Sexual

Clash of Desires: Detective vs. Femme Fatale

Directory of Open Access Journals (Sweden)

Veronika Pituková

2013-06-01

Full Text Available This article discusses the theme of desire presented in American hard-boiled detective fiction and its subsequent transformation on the screen in form of films noir of the 1940’s. The works in focus are novels The Maltese Falcon by Dashiell Hammett, Farewell, My Lovely by Raymond Chandler and Build My Gallows High by Daniel Mainwaring and their film noir adaptations – The Maltese Falcon (1941, Murder, My Sweet (1944 and Out of the Past (1947. The proposed paper seeks to offer a contrastive analysis of the novels and the films and situate them in their respective social and cultural contexts. The central conflict of this article is presented by the clash between the femme fatale’s and detective’s desires. Hard-boiled novels present femme fatale as a dame with a past, a spider woman, and the detective as a hero with no future, caught in her web of intrigues. The only way out for the detective is to suppress the sexual desire for the woman and hold strong to his professional code. The femme fatale’s desire for more and for better is deadly and dangerous for those who succumb to her lure, but the detective’s desire for truth can be fatal for the dark lady too.  This clash presented in the novels is confronted with the 1940’s Hollywood production. When the detective frees himself from the sexual lure of the fatal woman he has a chance to live and even bring her to justice, but she can still escape or decide herself what to do with her destiny. Both, the dame and the hero are victims of their desires. The 1940’s films noir’s femme fatales have to pay for their crimes, no matter how crafty, seductive or manipulative they are.  Thus these films present the masculine dominance as strong and undefeated.

Factors influencing Zimbabwean physiotherapy students in choosing physiotherapy as a career

OpenAIRE

T. Mkondo; W. Mudzi; N. P. Mbambo

2007-01-01

People join professions for different reasons and the same applies to physiotherapists. The aim of the study was to identify the reasons for choosing physiotherapy as a career by Zimbabwean physiotherapy students. The study used a descriptive cross-sectional design where a questionnaire was administered to 60 students. Data were collected on the demographics of the students and also on their rating on the importance of 12 factors for their influence in them choosing physiotherapy as a career....

Molecular dynamics study on microstructure of near grain boundary distortion region in small grain size nano- NiAl alloy

International Nuclear Information System (INIS)

Wang, J.Y.; Wang, X.W.; Rifkin, J.; Li, D.X.

2001-12-01

Using the molecular dynamics simulation method, the microstructure of distortion region near curved amorphous-like grain boundary in nano-NiAl alloy is studied. The results showed that due to the internal elastic force of high energy grain boundary, distortion layer exists between grain and grain boundary. The lattice expansion and structure factor decreasing are observed in this region. Stacking fault in sample with grain size 3.8nm is clearly observed across the distortion region at the site very close to grain. The influences of different grain sizes on average distortion degree and volume fractions of distortion region, grain and grain boundary are also discussed. (author)

7 CFR 868.310 - Grades and grade requirements for the classes Long Grain Milled Rice, Medium Grain Milled Rice...

Science.gov (United States)

2010-01-01

... Grain Milled Rice, Medium Grain Milled Rice, Short Grain Milled Rice, and Mixed Milled Rice. (See also Â... Milled Rice Principles Governing Application of Standards § 868.310 Grades and grade requirements for the classes Long Grain Milled Rice, Medium Grain Milled Rice, Short Grain Milled Rice, and Mixed Milled Rice...

Choosing children: intergenerational justice?

Science.gov (United States)

Doyal, Len; McLean, Sheila

2005-03-01

In this discussion, we argue that the concept of intergenerational justice, usually used in environmental matters, is applicable to reproductive decisions also. Additionally, we propose that this permits certain reproductive choices to be made prior to conception or during the pregnancy, and that these choices should not be confined to clinical concerns. In particular, we argue that consideration of the interests of future children should be viewed from the perspective of objective well-being. That being the case, decisions about the sex of future offspring can, in terms of intergenerational justice, be legitimate. We do not argue that every reproductive choice is legitimate; for example it would not be legitimate deliberately to choose characteristics that prevent future children from potentially successful participation in social life.

Social desirability in personality inventories: Symptoms, diagnosis and prescribed cure

OpenAIRE

Bäckström, Martin; Björklund, Fredrik

2013-01-01

An analysis of social desirability in personality assessment is presented. Starting with the symptoms, Study 1 showed that mean ratings of graded personality items are moderately to strongly linearly related to social desirability (Self Deception, Impression formation, and the first Principal Component), suggesting that item popularity may be a useful heuristic tool for identifying items which elicit socially desirable responding. We diagnose the cause of socially desirable responding as an i...

Pressure effect on grain boundary diffusion

International Nuclear Information System (INIS)

Smirnova, E.S.; Chuvil'deev, V.N.

1997-01-01

The influence of hydrostatic pressure on grain boundary diffusion and grain boundary migration in metallic materials is theoretically investigated. The model is suggested that permits describing changes in activation energy of grain boundary self-diffusion and diffusion permeability of grain boundaries under hydrostatic pressure. The model is based on the ideas about island-type structure of grain boundaries as well as linear relationship of variations in grain boundary free volume to hydrostatic pressure value. Comparison of theoretical data with experimental ones for a number of metals and alloys (α-Zr, Sn-Ge, Cu-In with Co, In, Al as diffusing elements) shows a qualitative agreement

Ochratoxin A in grain dust--estimated exposure and relations to agricultural practices in grain production.

Science.gov (United States)

Halstensen, Anne Straumfors; Nordby, Karl-Christian; Elen, Oleif; Eduard, Wijnand

2004-01-01

Ochratoxin A (OTA) is a nephrotoxin frequently contaminating grains. OTA inhalation during grain handling may therefore represent a health risk to farmers, and was the subject of this study. Airborne and settled grain dust was collected during grain work on 84 Norwegian farms. Climate and agricultural practices on each farm were registered. Penicillium spp., Aspergillus spp. and OTA in settled dust were measured. Settled dust contained median 4 microg OTA/kg dust (range 2-128), correlating with Penicillium spp. (median 40 cfu/mg; range 0-32000, rs =0.33; p grain species, districts and agricultural practices. Penicillium levels, but not OTA levels, were higher in storage than in threshing dust (p=0.003), and increased with storage time (rs =0.51, p dust during threshing and median 7 mg/m3 (range 1-110) dust during storage work, equalling median 3.7 pg/m3 (range 0.6-200) and median 40 pg/m3 (range 2-14000) OTA, respectively (p grain work was low, although varying by more than 1,000-fold. However, the farmers may occasionally be highly exposed, particularly during handling of stored grain.

Choosing early pregnancy termination methods in Urban Mozambique

NARCIS (Netherlands)

Mitchell, Ellen M. H.; Kwizera, Amata; Usta, Momade; Gebreselassie, Hailemichael

2010-01-01

Little is known about who chooses medication abortion with misoprostol and why. Women seeking early abortion in 5 public hospitals in Maputo, Mozambique were recruited in 2005 and 2006 to explore decision-making strategies, method preferences and experiences with misoprostol and vacuum aspiration

Evolution of orientations and deformation structures within individual grains in cold rolled columnar grained nickel

DEFF Research Database (Denmark)

Wu, G.L.; Godfrey, A.; Winther, Grethe

2011-01-01

Columnar grained Ni is used as a model material allowing simultaneous non-surface investigations of the evolution of crystallographic orientations and deformation microstructures within individual grains as a function of rolling strain up to ε=0.7. Electron channelling contrast and electron...... backscattered diffraction are used to visualise microstructures and crystallographic orientations. It is found that both the microstructural and the textural development depend strongly on the initial grain orientation. A grain size effect is observed on the deformation-induced orientation scatter within...

Effect of acicular ferrite formation on grain refinement in the coarse-grained region of heat-affected zone

International Nuclear Information System (INIS)

Wan, X.L.; Wei, R.; Wu, K.M.

2010-01-01

The microstructure of acicular ferrite and its formation for the grain refinement of coarse-grained region of heat-affected zone of high strength low-alloy bainite steels were studied using three-dimensional reconstruction technique. Crystallographic grain size was analyzed by means of electron backscatter diffraction. It was revealed that the microstructure in the coarse-grained region of the heat-affected zone consisted of predominantly bainite packets and a small proportion of acicular ferrite. Acicular ferrite was of lath or plate-like rather than needle or rod-like morphology. Tempering of the coarse-grained region of heat-affected zone showed that the acicular ferrite was more stable than the bainite, indicating that the acicular ferrite was formed prior to bainite. The acicular ferrite laths or plates divided the prior austenite grains into smaller and separate regions, and confining the bainite transformed at lower temperatures in the smaller regions and hence leading to the grain refinement in the coarse-grained region of the heat-affected zone.

Effect of acicular ferrite formation on grain refinement in the coarse-grained region of heat-affected zone

Energy Technology Data Exchange (ETDEWEB)

Wan, X.L.; Wei, R. [Institute of Advanced Steels and Welding Technology, Hubei Provincial Key Laboratory for Systems Science on Metallurgical Processing, Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Wuhan University of Science and Technology, Wuhan 430081 (China); Wu, K.M., E-mail: wukaiming@wust.edu.cn [Institute of Advanced Steels and Welding Technology, Hubei Provincial Key Laboratory for Systems Science on Metallurgical Processing, Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Wuhan University of Science and Technology, Wuhan 430081 (China)

2010-07-15

The microstructure of acicular ferrite and its formation for the grain refinement of coarse-grained region of heat-affected zone of high strength low-alloy bainite steels were studied using three-dimensional reconstruction technique. Crystallographic grain size was analyzed by means of electron backscatter diffraction. It was revealed that the microstructure in the coarse-grained region of the heat-affected zone consisted of predominantly bainite packets and a small proportion of acicular ferrite. Acicular ferrite was of lath or plate-like rather than needle or rod-like morphology. Tempering of the coarse-grained region of heat-affected zone showed that the acicular ferrite was more stable than the bainite, indicating that the acicular ferrite was formed prior to bainite. The acicular ferrite laths or plates divided the prior austenite grains into smaller and separate regions, and confining the bainite transformed at lower temperatures in the smaller regions and hence leading to the grain refinement in the coarse-grained region of the heat-affected zone.

Evolution of interstellar grains

International Nuclear Information System (INIS)

Greenberg, J.M.

1984-01-01

The principal aim of this chapter is to derive the properties of interstellar grains as a probe of local physical conditions and as a basis for predicting such properties as related to infrared emissivity and radiative transfer which can affect the evolution of dense clouds. The first sections will develop the criteria for grain models based directly on observations of gas and dust. A summary of the chemical evolution of grains and gas in diffuse and dense clouds follows. (author)

Color waves : a simple heuristic for choosing false colors

NARCIS (Netherlands)

Overveld, van C.W.A.M.

1997-01-01

A simple heuristic is presented for choosing false colors for visualizing scalar functions on two-dimensional domains. The color scheme allows inspection of the function on several length scales simultanously.

A constitutive model of nanocrystalline metals based on competing grain boundary and grain interior deformation mechanisms

KAUST Repository

Gurses, Ercan; El Sayed, Tamer S.

2011-01-01

In this work, a viscoplastic constitutive model for nanocrystalline metals is presented. The model is based on competing grain boundary and grain interior deformation mechanisms. In particular, inelastic deformations caused by grain boundary

Grain Formation Processes in Oxygen-Rich Circumstellar Outflows: Testing the Metastable Eutectic Condensation Hypothesis and Measuring Atom-Grain & Grain-Grain Sticking Coefficients (A Sub-orbital Investigation)

Science.gov (United States)

Nuth, Joseph

An experimentally-based model of grain formation in oxygen-rich circumstellar outflows that includes vapor-solid nucleation, grain growth, thermal annealing and grain aggregation in sufficient detail to predict the spectral energy distribution (SED) of the shells for comparison with observations of a wide range of stellar sources still lacks critical data. In order to gather this data we propose to conduct a series of laboratory experiments using our proven experimental system and microgravity condensation, growth and grain aggregation experiments on sounding rockets with a flight-proven payload provided by Dr. Yuki Kimura of Hokkaido University. We have proposed that solids from a hydrogen-rich, supersaturated, Fe-Mg-SiO vapor condense at metastable eutectic points in this ternary phase diagram. Because the FeOMgO system is totally miscible (has no eutectic or metastable eutectic compositions), this predicts that condensates will be pure Mg-silicate or Fe-silicate grains and that no primary condensate will be a mixed Fe-Mg-silicate. We have shown that this observation leads to a logical explanation as to why pure magnesium olivine and enstatite minerals are detected in circumstellar winds rather than the mixed Mg-Fe-silicate grains that might otherwise be expected (Rietmeijer, Nuth & Karner, 1999). This simplifying hypothesis has been built into our models of circumstellar condensation and growth. However, these experimental results require confirmation and testing since they should apply to other, quite similar condensable systems. We propose to test this hypothesis by condensing solids from the Fe-Mg-AlO ternary vapor system. Since FeO-MgO miscibility also applies to this system, the primary condensates from such a vapor should consist of pure amorphous Fe-aluminates and Mg-aluminates. No mixed Fe-Mg-spinels should be detected as primary condensates if this hypothesis is correct, just as none were detected for the FeO-MgO-SiO system. Confirmation of this

Storing Peanuts in Grain Bags

Science.gov (United States)

A study was executed to determine the potential of storing farmers stock peanuts and shelled peanuts for crushing in hermetically sealed grain bags. The objectives of the study were to evaluate equipment for loading and unloading the grain bags, the capacity of the grain bags, and the changes in qu...

Loss of sexual desire in the postmenopausal woman

DEFF Research Database (Denmark)

Wylie, Kevan; Daines, Brian; Jannini, Emmanuele A

2007-01-01

INTRODUCTION: Hypoactive sexual desire disorder (HSDD) is a common clinical problem that may bother women. AIM: To provide a clear clinical pathway for the assessment and management of women presenting with symptoms of loss of sexual interest and desire (HSDD). MAIN OUTCOME MEASURES: Patient self...

Plant Density Effect on Grain Number and Weight of Two Winter Wheat Cultivars at Different Spikelet and Grain Positions

OpenAIRE

Li, Yong; Cui, Zhengyong; Ni, Yingli; Zheng, Mengjing; Yang, Dongqing; Jin, Min; Chen, Jin; Wang, Zhenlin; Yin, Yanping

2016-01-01

In winter wheat, grain development is asynchronous. The grain number and grain weight vary significantly at different spikelet and grain positions among wheat cultivars grown at different plant densities. In this study, two winter wheat (Triticum aestivum L.) cultivars, 'Wennong6' and 'Jimai20', were grown under four different plant densities for two seasons, in order to study the effect of plant density on the grain number and grain weight at different spikelet and grain positions. The resul...

Segregation of solute elements at grain boundaries in an ultrafine grained Al-Zn-Mg-Cu alloy

International Nuclear Information System (INIS)

Sha, Gang; Yao, Lan; Liao, Xiaozhou; Ringer, Simon P.; Chao Duan, Zhi; Langdon, Terence G.

2011-01-01

The solute segregation at grain boundaries (GBs) of an ultrafine grained (UFG) Al-Zn-Mg-Cu alloy processed by equal-channel angular pressing (ECAP) at 200 o C was characterised using three-dimensional atom probe. Mg and Cu segregate strongly to the grain boundaries. In contrast, Zn does not always show clear segregation and may even show depletion near the grain boundaries. Trace element Si selectively segregates at some GBs. An increase in the number of ECAP passes leads to a decrease in the grain size but an increase in solute segregation at the boundaries. The significant segregation of alloying elements at the boundaries of ultrafine-grained alloys implies that less solutes will be available in the matrix for precipitation with a decrease in the average grain size. -- Research Highlights: → Atom probe tomography has been employed successfully to reveal unique segregation of solutes at ultrafine grained material. → Mg and Cu elements segregated strongly at the grain boundary of an ultrafine grained Al-Zn-Mg-Cu alloy processed by 4-pass and 8-pass ECAP at 200 o C. Zn frequently depleted at GBs with a Zn depletion region of 7-15 nm in width on one or both sides of the GBs. Only a small fraction (3/13) of GBs were observed with a low level of Zn segregation where the combined Mg and Cu excess is over 3.1 atom/nm 2 . Si appeared selectively segregated at some of the GBs. → The increase in number of ECAP passes from 4 to 8 correlated with the increase in mean level segregation of Mg and Cu for both solute excess and peak concentration. → The change of plane normal of a grain boundary within 30 o only leads to a slight change in the solute segregation level.

Grain growth studies on nanocrystalline Ni powder

International Nuclear Information System (INIS)

Rane, G.K.; Welzel, U.; Mittemeijer, E.J.

2012-01-01

The microstructure of nanocrystalline Ni powder produced by ball-milling and its thermal stability were investigated by applying different methods of X-ray diffraction line-profile analysis: single-line analysis, whole powder-pattern modelling and the (modified) Warren–Averbach method were employed. The kinetics of grain growth were investigated by both ex-situ and in-situ X-ray diffraction measurements. With increasing milling time, the grain-size reduction is accompanied by a considerable narrowing of the size distribution and an increase in the microstrain. Upon annealing, initial, rapid grain growth occurs, accompanied by the (almost complete) annihilation of microstrain. For longer annealing times, the grain-growth kinetics depend on the initial microstructure: a smaller microstrain with a broad grain-size distribution leads to linear grain growth, followed by parabolic grain growth, whereas a larger microstrain with a narrow grain-size distribution leads to incessant linear grain growth. These effects have been shown to be incompatible with grain-boundary curvature driven growth. The observed kinetics are ascribed to the role of excess free volume at the grain boundaries of nanocrystalline material and the prevalence of an “abnormal grain-growth” mechanism.

Desired emotions across cultures: A value-based account.

Science.gov (United States)

Tamir, Maya; Schwartz, Shalom H; Cieciuch, Jan; Riediger, Michaela; Torres, Claudio; Scollon, Christie; Dzokoto, Vivian; Zhou, Xiaolu; Vishkin, Allon

2016-07-01

Values reflect how people want to experience the world; emotions reflect how people actually experience the world. Therefore, we propose that across cultures people desire emotions that are consistent with their values. Whereas prior research focused on the desirability of specific affective states or 1 or 2 target emotions, we offer a broader account of desired emotions. After reporting initial evidence for the potential causal effects of values on desired emotions in a preliminary study (N = 200), we tested the predictions of our proposed model in 8 samples (N = 2,328) from distinct world cultural regions. Across cultural samples, we found that people who endorsed values of self-transcendence (e.g., benevolence) wanted to feel more empathy and compassion, people who endorsed values of self-enhancement (e.g., power) wanted to feel more anger and pride, people who endorsed values of openness to change (e.g., self-direction) wanted to feel more interest and excitement, and people who endorsed values of conservation (e.g., tradition) wanted to feel more calmness and less fear. These patterns were independent of differences in emotional experience. We discuss the implications of our value-based account of desired emotions for understanding emotion regulation, culture, and other individual differences. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Grain-to-grain variations in NbC particle size distributions in an austenitic stainless steel

International Nuclear Information System (INIS)

Barlow, C.Y.; Ralph, B.; Silverman, B.; Jones, A.R.

1979-01-01

Quantitative information has been obtained concerning the size distributions of NbC precipitate particles in different grains in a deformed and aged austenitic stainless steel specimen. The precipitate size distributions obtained differ from one grain to another. The average disparity measured between the mean precipitate sizes was a function of the distance between the grains compared. The results obtained are considered in terms of differences in precipitation behaviour due to variations in the levels of plastic strain in constituent grains of the deformed specimen. (author)

Grain refinement of zinc-aluminium alloys

International Nuclear Information System (INIS)

Zaid, A.I.O.

2006-01-01

It is now well-established that the structure of the zinc-aluminum die casting alloys can be modified by the binary Al-Ti or the ternary Al-Ti-B master alloys. in this paper, grain refinement of zinc-aluminum alloys by rare earth materials is reviewed and discussed. The importance of grain refining of these alloys and parameters affecting it are presented and discussed. These include parameters related to the Zn-Al alloys cast, parameters related to the grain refining elements or alloys and parameters related to the process. The effect of addition of other alloying elements e.g. Zr either alone or in the presence of the main grain refiners Ti or Ti + B on the grain refining efficiency is also reviewed and discussed. Furthermore, based on the grain refinement and the parameters affecting it, a criterion for selection of the optimum grain refiner is suggested. Finally, the recent research work on the effect of grain refiners on the mechanical behaviour, impact strength, wear resistance, and fatigue life of these alloys are presented and discussed. (author)

Factors Influencing Pregnancy Desires among HIV Positive Women ...

African Journals Online (AJOL)

Factors Influencing Pregnancy Desires among HIV Positive Women in Sibande District in Mpumalanga, South Africa. ... Gender and Behaviour ... The objective of the study is to present findings on factors influencing pregnancy desires amongst HIV positive women that have participated in Prevention of Mother to child ...

Evidence-based treatments for low sexual desire in women.

Science.gov (United States)

Brotto, Lori A

2017-04-01

Low sexual desire is the most common sexual complaint in women, with multinational studies finding that at least a third of women experience low sexual desire. No single etiology for the development of Female Sexual Interest/Arousal Disorder, the diagnosis laid out by the 5th edition of the Diagnostic and Statistical Manual of Mental Disorders, has been established. There has been considerable interest in pharmacological approaches to improving low desire, and agents targeting a range of neurotransmitters have been examined. To date, only flibanserin, a centrally acting medication targeting the serotonin, dopamine, and norepinephrine systems, has been approved by the Food and Drug Administration (FDA). Despite statistically significant effects on sexual desire, sexual distress, and sexually satisfying events, side-effects are significant, and flibanserin is completely contraindicated with alcohol. As such, there has been renewed interest in advancing the science of psychological approaches to low desire, including cognitive behavioral and mindfulness therapies. Copyright © 2017 Elsevier Inc. All rights reserved.

Experimental Study of Dust Grain Charging

Science.gov (United States)

Spann, James F; Venturini, Catherine C.; Comfort, Richard H.; Mian, Abbas M.

1999-01-01

The results of an experimental study of the charging mechanisms of micron size dust grains are presented. Individual dust grains are electrodynamically suspended and exposed to an electron beam of known energy and flux, and to far ultraviolet radiation of known wavelength and intensity. Changes in the charge-to-mass ratio of the grain are directly measured as a function of incident beam (electron and/or photon), grain size and composition. Comparisons of our results to theoretical models that predict the grain response are presented.

Proteomics analysis of maize (Zea mays L.) grain based on iTRAQ reveals molecular mechanisms of poor grain filling in inferior grains.

Science.gov (United States)

Yu, Tao; Li, Geng; Liu, Peng; Dong, Shuting; Zhang, Jiwang; Zhao, Bin

2017-06-01

In maize, inferior grains (IG) located on the upper part of the ear have poor grain filling process compared to superior grains (SG) located on the middle and lower parts of the ear. This difference limits satisfactory yield and quality; however, the underlying molecular mechanisms remain unknown. Here, using the isobaric tag for relative and absolute quantification (iTRAQ) technology, the proteomes of IG and SG during early and middle grain filling stages were investigated. In total, 4720 proteins were identified in maize grain and 305 differentially accumulated proteins (DiAPs) were detected between IG and SG. These DiAPs were involved in diverse cellular and metabolic processes with preferred distribution in protein synthesis/destination and metabolism. Compared to SG, DiAPs related to cell growth/division and starch synthesis were lag-accumulated and down-regulated in IG, respectively, resulting in smaller sink sizes and lower sink activities in IG. Meanwhile, impediment of the glycolysis pathway in IG may lead to reduce energy supply and building materials for substance synthesis. Additionally, reactive oxygen species (ROS) homeostasis and the defense system were disturbed in IG, which might lead to reduce protection against various environmental stresses. The present study provides new information on the proteomic differences between IG and SG, and explains possible molecular mechanisms for poor grain filling in IG. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Growing large columnar grains of CH3NH3PbI3 using the solid-state reaction method enhanced by less-crystallized nanoporous PbI2 films

Science.gov (United States)

Zheng, Huifeng; Wang, Weiqi; Liu, Yangqiao; Sun, Jing

2017-03-01

Compact, pinhole-free and PbI2-free perovskite films, are desirable for high-performance perovskite solar cells (PSCs), especially if large columnar grains are obtained in which the adverse effects of grain boundaries will be minimized. However, the conventional solid-state reaction methods, originated from the two-step method, failed to grow columnar grains of CH3NH3PbI3 in a facile way. Here, we demonstrate a strategy for growing large columnar grains of CH3NH3PbI3, by less-crystallized nanoporous PbI2 (ln-PbI2) film enhanced solid-state reaction method. We demonstrated columnar grains were obtainable only when ln-PbI2 films were applied. Therefore, the replacement of compact PbI2 by ln-PbI2 in the solid-sate reaction, leads to higher power conversion efficiency, better reproducibility, better stability and less hysteresis. Furthermore, by systematically investigating the effects of annealing temperature and duration, we found that an annealing temperature ≥120 °C was also critical for growing columnar grains. With the optimal process, a champion efficiency of 16.4% was obtained and the average efficiency reached 14.2%. Finally, the mechanism of growing columnar grains was investigated, in which a VPb″ -assisted hooping model was proposed. This work reveals the origins of grain growth in the solid-state reaction method, which will contribute to preparing high quality perovskite films with much larger columnar grains.

[Dentistry students' reasons for choosing dentistry as a career in Damascus University].

Science.gov (United States)

Mashlah, A M

2012-05-01

This cross-sectional questionnaire survey assessed the motives for choosing dentist as a profession among dentistry students at Damascus University, Syrian Arab Republic. A total of 408 undergraduate students (233 males and 175 females) aged 18-23 years were selected randomly from students in the second, third and fourth years of dentistry study. They completed a questionnaire that enquired about their reasons for studying dentistry as well as their sociodemographic characteristics. The number of admissions in females had increased over the 3 years. Most parents of the students were university-educated. The main motivation for choosing dentistry was as a means to achieve personal goals, including getting a good job abroad, having financial independence, and attaining a good reputation. There were significant differences between the sexes with regard to the reasons for choosing dentistry.

Satisfaction with appearance and the desired treatment to improve aesthetics.

Science.gov (United States)

Al-Zarea, Bader K

2013-01-01

Objective. To identify participants' satisfaction with appearance and the desired treatment to improve aesthetics. Materials and Methods. 220 participants (127 males and 93 females, mean age = 21.4 ± 1.5 years) were recruited into the study. A structured questionnaire was used to assess patients' satisfaction with appearance and what treatment they desire to improve aesthetics. Participants scored the level of satisfaction with appearance using visual analogue scale. Results. The VAS mean score of satisfaction with general appearance was 6.8 ± 2.3. Half participants were dissatisfied with tooth appearance and 65.9% were dissatisfied with tooth colour. Higher VAS scores were associated with higher desire for all treatments that improve tooth appearance (P feeling of poor tooth alignment, presence of fractured anterior teeth, and increased desire for orthodontic, crowns, and dentures treatments (P desire for tooth whitening and tooth coloured fillings (P desire for aesthetic treatments.

Alignment of dust grains in ionized regions

Science.gov (United States)

Anderson, Nels; Watson, William D.

1993-01-01

The rate at which charged dust grains in a plasma are torqued by passing ions and electrons is calculated. When photo-emission of electrons is not important, attraction of ions by the grain monopole potential increases the rate at which the grains' spins are dealigned by nearly an order of magnitude. Consequently, the energy density of the magnetic field required to align grains in an H II region may be increased by about an order of magnitude. In contrast, electric dipole and quadrupole moments are unlikely to produce large dealignment rates for grains of modest length-to-width ratio. Nonetheless, for positively charged grains these higher-order moments likely prevent monopole repulsion of ions from reducing the dealignment rate far below that for neutral grains. The presence of positive grain charge therefore does not greatly facilitate grain alignment in an H II region.

Concepts on Low Temperature Mechanical Grain Growth

Energy Technology Data Exchange (ETDEWEB)

Sharon, John Anthony [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Metallurgy and Materials Joining Dept.; Boyce, Brad Lee [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Metallurgy and Materials Joining Dept.

2013-11-01

In metals, as grain size is reduced below 100nm, conventional dislocation plasticity is suppressed resulting in improvements in strength, hardness, and wears resistance. Existing and emerging components use fine grained metals for these beneficial attributes. However, these benefits can be lost in service if the grains undergo growth during the component’s lifespan. While grain growth is traditionally viewed as a purely thermal process that requires elevated temperature exposure, recent evidence shows that some metals, especially those with nanocrystalline grain structure, can undergo grain growth even at room temperature or below due to mechanical loading. This report has been assembled to survey the key concepts regarding how mechanical loads can drive grain coarsening at room temperature and below. Topics outlined include the atomic level mechanisms that facilitate grain growth, grain boundary mobility, and the impact of boundary structure, loading scheme, and temperature.

Why are junior doctors deterred from choosing a surgical career?

Science.gov (United States)

Rogers, Mary E; Creed, Peter A; Searle, Judy

2012-05-01

To identify the reasons why interns would not choose a surgical career. This qualitative study used semi-structured telephone interviews to explore the future career choices of 41 junior doctors (14 men, 27 women). Doctors were asked to identify specialties they would not take up, and state why this was the case. Thirty (73.2%) of the 41 interns nominated surgery as a specialty they would not choose. Themes relating to reasons for not wanting to pursue a surgical career included the lifestyle associated with surgery (66.7%), the culture within the surgical work environment (53.3%), the lack of interest in performing surgical work (36.7%), and the training requirements associated with surgery (33.3%). Both sexes had similar reasons for not wanting to choose a surgical career; but additionally, women referred to the male domination of surgery, and the difficulty and inflexibility of the training program as deterrents. Efforts are needed to promote interest in surgery as a career especially for women, to improve the surgical work environment so that medical students and junior doctors have exposure to positive role models and surgical placements, and to provide a more flexible approach to surgical training.

Establishment of Grain Farmers' Supply Response Model and Empirical Analysis under Minimum Grain Purchase Price Policy

OpenAIRE

Zhang, Shuang

2012-01-01

Based on farmers' supply behavior theory and price expectations theory, this paper establishes grain farmers' supply response model of two major grain varieties (early indica rice and mixed wheat) in the major producing areas, to test whether the minimum grain purchase price policy can have price-oriented effect on grain production and supply in the major producing areas. Empirical analysis shows that the minimum purchase price published annually by the government has significant positive imp...

Romantic love and sexual desire in close relationships.

Science.gov (United States)

Gonzaga, Gian C; Turner, Rebecca A; Keltner, Dacher; Campos, Belinda; Altemus, Margaret

2006-05-01

Drawing on recent claims in the study of relationships, attachment, and emotion, the authors hypothesized that romantic love serves a commitment-related function and sexual desire a reproduction-related function. Consistent with these claims, in Study 1, brief experiences of romantic love and sexual desire observed in a 3-min interaction between romantic partners were related to distinct feeling states, distinct nonverbal displays, and commitment- and reproductive-related relationship outcomes, respectively. In Study 2, the nonverbal display of romantic love was related to the release of oxytocin. Discussion focuses on the place of romantic love and sexual desire in the literature on emotion. 2006 APA, all rights reserved

Comparative characteristics of grain classifications of soft wheat of Kazakhstan and major grain-producing countries

Directory of Open Access Journals (Sweden)

D. A. Shaimerdenova

2018-01-01

Full Text Available Soft wheat is one of the most important crops, grown in more than 130 countries. To date, one-fifth of the world's wheat, or about 150 million tons a year, is sold on international markets. In the world trade traditionally dominated by the US, Australia, Canada and Argentina. Kazakhstan, being on the 15th place in the production of wheat grain, is among the first ten exporters - in 2017 the country exported about 8 million tons to the amount of 1.5 billion dollars. USA, then, as potential export opportunities are much higher, as evidenced by annual carryover stocks at 3 million tons. According to experts, considerable differences in the classification of wheat grain used in Kazakhstan and in other countries participating in the grain market and the methods for assessing the technological dignity indicators (TDs laid down in the classifications are a significant obstacle to increasing the export potential of wheat grains. In view of this, an analysis was made of grain classifications of wheat grains used in the most important grain producing countries, TD indicators were determined, methods for their evaluation, and differences were revealed. It is established that in countries that are stable in the quantitative and qualitative characteristics of grain, an insignificant list of TD indicators is adopted, while they characterize the physical quality and state of the grain, which may indicate a general suitability for grinding. It is determined that in Russia and Kazakhstan, in determining the contamination, such an indicator as dockage is not taken into account. Comparative tests of different methods of sampling and determination of contamination have been carried out, and correlation coefficients have been established between indicators of contamination determined by different methods.

Use of Social Desirability Scales in Clinical Psychology: A Systematic Review.

Science.gov (United States)

Perinelli, Enrico; Gremigni, Paola

2016-06-01

There is still an open debate about the utility of social desirability indicators. This report systematically reviewed the use of social desirability scales in studies addressing social desirability in clinical psychology. A systematic review (January 2010-March 2015) was conducted, including 35 studies meeting the inclusion criteria of being published in peer-reviewed journals and describing quantitative findings about an association of social desirability with clinical psychology variables using a cross-sectional or longitudinal design. Social desirability was associated with self-reports of various clinical-psychological dimensions. Most of the included studies treated social desirability as a 1-dimensional variable and only 10 of 35 disentangled the impression management and self-deception components. Although theoretical literature does not consider social desirability a mere response bias, only 4 of the reviewed articles controlled for the possible suppressor effect of personality variables on social desirability, while the majority focused upon the stylistic (response bias) rather than the substantive (personality) nature of this construct. The present review highlighted some limitations in the use of social desirability scales in recent clinical psychology research and tried to offer a few suggestions for handling this issue. © 2016 Wiley Periodicals, Inc.

Abnormal grain growth: a non-equilibrium thermodynamic model for multi-grain binary systems

Czech Academy of Sciences Publication Activity Database

Svoboda, Jiří; Fischer, F. D.

2014-01-01

Roč. 22, č. 1 (2014), Art . No. 015013 ISSN 0965-0393 Institutional support: RVO:68081723 Keywords : grain boundary segregation * abnormal grain growth * theory * modelling * solute drag Subject RIV: BJ - Thermodynamics Impact factor: 2.167, year: 2014

Suprathermal grains: on intergalactic magnetic fields

International Nuclear Information System (INIS)

Dasgupta, A.K.

1979-01-01

Charged dust grains of radii a approximately equal to 3 x 10 -6 to approximately 3 x 10 -5 cm may be driven out of the galaxy due to radiation pressure of starlight. Once clear of the main gas-dust layer, dust grains may then escape into intergalactic space. Such grains are virtually indestructible-being evaporated only during formation. The dust grains, once injected into the intergalactic medium, may acquire suprathermal energy, thus 'suprathermal grains' in collision with magnetized cloud by the Fermi process. In order to attain relativistic energy, suprathermal grains have to move in and out ('scattering') of the magnetic field of the medium. It is now well established that high energy cosmic rays are of the order 10 20 eV or more. It has been speculated that these high energy (> = 10 18 eV) cosmic ray particles are charged dust grains, of intergalactic origin. This is possible only if there exists a magnetic field in the intergalactic medium. (Auth.)

The effect of grain boundary chemistry on the slip transmission process through grain boundaries in Ni3Al

International Nuclear Information System (INIS)

Robertson, I.M.; Lee, T.C.; Subramanian, R.; Birnbaum, H.K.

1992-01-01

This paper reports on the conditions established in disordered FCC systems for predicting the slip system that will be activated by a grain boundary to relieve a local stress concentration that have been applied to the ordered FCC alloy Ni 3 Al. The slip transfer behavior in hypo-stoichiometric Ni 3 Al with (0.2 at. %B) and without boron was directly observed by performing the deformation experiments in situ in the transmission electron microscope. In the boron-free and boron-doped alloys, lattice dislocations were incorporated in the grain boundary, but did not show evidence of dissociation to grain boundary dislocations or of movement in the grain boundary plane. The stress concentration associated with the dislocation pileup at the grain boundary are relieved by the emission of dislocations from the grain boundary in the boron-doped alloy. The slip system initiated in the adjoining grain obeyed the conditions established for disordered FCC systems. In the boron-free alloy, the primary stress relief mechanism was grain-boundary cracking, although dislocation emission from the grain boundary also occurred and accompanied intergranular crack advance

Computer simulation of grain growth in HAZ

Science.gov (United States)

Gao, Jinhua

Two different models for Monte Carlo simulation of normal grain growth in metals and alloys were developed. Each simulation model was based on a different approach to couple the Monte Carlo simulation time to real time-temperature. These models demonstrated the applicability of Monte Carlo simulation to grain growth in materials processing. A grain boundary migration (GBM) model coupled the Monte Carlo simulation to a first principle grain boundary migration model. The simulation results, by applying this model to isothermal grain growth in zone-refined tin, showed good agreement with experimental results. An experimental data based (EDB) model coupled the Monte Carlo simulation with grain growth kinetics obtained from the experiment. The results of the application of the EDB model to the grain growth during continuous heating of a beta titanium alloy correlated well with experimental data. In order to acquire the grain growth kinetics from the experiment, a new mathematical method was developed and utilized to analyze the experimental data on isothermal grain growth. Grain growth in the HAZ of 0.2% Cu-Al alloy was successfully simulated using the EDB model combined with grain growth kinetics obtained from the experiment and measured thermal cycles from the welding process. The simulated grain size distribution in the HAZ was in good agreement with experimental results. The pinning effect of second phase particles on grain growth was also simulated in this work. The simulation results confirmed that by introducing the variable R, degree of contact between grain boundaries and second phase particles, the Zener pinning model can be modified as${D/ r} = {K/{Rf}}$where D is the pinned grain size, r the mean size of second phase particles, K a constant, f the area fraction (or the volume fraction in 3-D) of second phase.

MATHEMATICAL MODEL OF GRAIN MICRONIZATION

Directory of Open Access Journals (Sweden)

V. A. Afanas’ev

2014-01-01

Full Text Available Summary. During micronisation grain moisture evaporates mainly in decreasing drying rate period. Grain layer located on the surface of the conveyor micronisers will be regarded as horizontal plate. Due to the fact that the micronisation process the surface of the grain evaporates little moisture (within 2-7 % is assumed constant plate thickness. Because in the process of micronization grain structure is changing, in order to achieve an exact solution of the equations necessary to take into account changes thermophysical, optical and others. Equation of heat transfer is necessary to add a term that is responsible for the infrared heating. Because of the small thickness of the grain, neglecting the processes occurring at the edge of the grain, that is actually consider the problem of an infinite plate. To check the adequacy of the mathematical model of the process of micronisation of wheat grain moisture content must be comparable to the function of time, obtained by solving the system of equations with the measured experimental data of experience. Numerical solution of a system of equations for the period of decreasing drying rate is feasible with the help of the Maple 14, substituting the values of the constants in the system. Calculation of the average relative error does not exceed 7- 10 %, and shows a good agreement between the calculated data and the experimental values.

Genetic dissection of grain size and grain number trade-offs in CIMMYT wheat germplasm.

Science.gov (United States)

Griffiths, Simon; Wingen, Luzie; Pietragalla, Julian; Garcia, Guillermo; Hasan, Ahmed; Miralles, Daniel; Calderini, Daniel F; Ankleshwaria, Jignaben Bipinchandra; Waite, Michelle Leverington; Simmonds, James; Snape, John; Reynolds, Matthew

2015-01-01

Grain weight (GW) and number per unit area of land (GN) are the primary components of grain yield in wheat. In segregating populations both yield components often show a negative correlation among themselves. Here we use a recombinant doubled haploid population of 105 individuals developed from the CIMMYT varieties Weebill and Bacanora to understand the relative contribution of these components to grain yield and their interaction with each other. Weebill was chosen for its high GW and Bacanora for high GN. The population was phenotyped in Mexico, Argentina, Chile and the UK. Two loci influencing grain yield were indicated on 1B and 7B after QTL analysis. Weebill contributed the increasing alleles. The 1B effect, which is probably caused by to the 1BL.1RS rye introgression in Bacanora, was a result of increased GN, whereas, the 7B QTL controls GW. We concluded that increased in GW from Weebill 7B allele is not accompanied by a significant reduction in grain number. The extent of the GW and GN trade-off is reduced. This makes this locus an attractive target for marker assisted selection to develop high yielding bold grain varieties like Weebill. AMMI analysis was used to show that the 7B Weebill allele appears to contribute to yield stability.

Spinodal decomposition in fine grained materials

Indian Academy of Sciences (India)

Unknown

ηηi has a value of unity inside the ith grain, decreases smoothly through the grain boundary region to zero out- side the grain. For a symmetric alloy of composition, c = 0⋅⋅5, our results show that microstructural evolution depends largely on the difference in the grain boundary energies, γγgb, of A-rich (αα) and B-rich (ββ) ...

Is there a correlation between androgens and sexual desire in women?

DEFF Research Database (Denmark)

Wåhlin-Jacobsen, Sarah; Pedersen, Anette Tønnes; Kristensen, Ellids

2015-01-01

between serum levels of androgens and sexual desire in women and whether the level of ADT-G is better correlated than the level of circulating androgens with sexual desire. METHODS: This was a cross-sectional study including 560 healthy women aged 19-65 years divided into three age groups. Correlations...... (DHEAS), and ADT-G were analyzed using mass spectrometry. RESULTS: Sexual desire correlated overall with FT and androstenedione in the total cohort of women. In a subgroup of women aged 25-44 years with no use of systemic hormonal contraception, sexual desire correlated with TT, FT, androstenedione......, and DHEAS. In women aged 45-65 years, androstenedione correlated with sexual desire. No correlations between ADT-G and sexual desire were identified. CONCLUSIONS: In the present study, FT and androstenedione were statistically significantly correlated with sexual desire in the total cohort of women. ADT...

Radiation disinfestation of grain

Energy Technology Data Exchange (ETDEWEB)

NONE

1962-10-15

A panel was convened by the International Atomic Energy Agency to consider ways of applying radiation to grain handling and insect control, and to make recommendations on the advisability and nature of any future action in this field. Among other subjects, the panel discussed the use of electron accelerators and gamma radiation for grain disinfestation as well as problems of radiation entomology and wholesomeness of irradiated grain. After reviewing the present state of knowledge regarding radiation disinfestation of grain, the experts agreed that pilot plant operations be initiated as soon as practicable in order to evaluate the use of irradiation plants under practical conditions in their entomological, engineering and economic aspects. They recommended that research effort be directed towards solving certain fundamental problems related to the proposed pilot plant projects; such as rapid methods for differentiation between sterile insects and normal ones; study of the metabolism of irradiated immature stages of insects in relation to the heating of treated grain; research into possible induction of radiation resistance; irradiation susceptibility of insects which show resistance to conventional insecticides; and study of methods of sensitizing insects to irradiation damage. It was also pointed out that the distribution of irradiated food for human consumption was controlled in most countries under present legislative procedures, and no country had yet approved radiation treatment of cereals. The experts recommended that countries in a position to submit evidence to their appropriate authorities regarding the wholesomeness of irradiated cereals should be encouraged to do so as soon as possible. Regarding the engineering aspects of irradiation pilot plant projects, the experts noted that the process could be automated and operated safely. Electron accelerators and cobalt sources could be used for all the throughput rates utilized in most conventional grain

Radiation disinfestation of grain

International Nuclear Information System (INIS)

1962-01-01

A panel was convened by the International Atomic Energy Agency to consider ways of applying radiation to grain handling and insect control, and to make recommendations on the advisability and nature of any future action in this field. Among other subjects, the panel discussed the use of electron accelerators and gamma radiation for grain disinfestation as well as problems of radiation entomology and wholesomeness of irradiated grain. After reviewing the present state of knowledge regarding radiation disinfestation of grain, the experts agreed that pilot plant operations be initiated as soon as practicable in order to evaluate the use of irradiation plants under practical conditions in their entomological, engineering and economic aspects. They recommended that research effort be directed towards solving certain fundamental problems related to the proposed pilot plant projects; such as rapid methods for differentiation between sterile insects and normal ones; study of the metabolism of irradiated immature stages of insects in relation to the heating of treated grain; research into possible induction of radiation resistance; irradiation susceptibility of insects which show resistance to conventional insecticides; and study of methods of sensitizing insects to irradiation damage. It was also pointed out that the distribution of irradiated food for human consumption was controlled in most countries under present legislative procedures, and no country had yet approved radiation treatment of cereals. The experts recommended that countries in a position to submit evidence to their appropriate authorities regarding the wholesomeness of irradiated cereals should be encouraged to do so as soon as possible. Regarding the engineering aspects of irradiation pilot plant projects, the experts noted that the process could be automated and operated safely. Electron accelerators and cobalt sources could be used for all the throughput rates utilized in most conventional grain

Increasing women's sexual desire: The comparative effectiveness of estrogens and androgens.

Science.gov (United States)

Cappelletti, Maurand; Wallen, Kim

2016-02-01

Both estradiol and testosterone have been implicated as the steroid critical for modulating women's sexual desire. By contrast, in all other female mammals only estradiol has been shown to be critical for female sexual motivation and behavior. Pharmaceutical companies have invested heavily in the development of androgen therapies for female sexual desire disorders, but today there are still no FDA approved androgen therapies for women. Nonetheless, testosterone is currently, and frequently, prescribed off-label for the treatment of low sexual desire in women, and the idea of testosterone as a possible cure-all for female sexual dysfunction remains popular. This paper places the ongoing debate concerning the hormonal modulation of women's sexual desire within a historical context, and reviews controlled trials of estrogen and/or androgen therapies for low sexual desire in postmenopausal women. These studies demonstrate that estrogen-only therapies that produce periovulatory levels of circulating estradiol increase sexual desire in postmenopausal women. Testosterone at supraphysiological, but not at physiological, levels enhances the effectiveness of low-dose estrogen therapies at increasing women's sexual desire; however, the mechanism by which supraphysiological testosterone increases women's sexual desire in combination with an estrogen remains unknown. Because effective therapies require supraphysiological amounts of testosterone, it remains unclear whether endogenous testosterone contributes to the modulation of women's sexual desire. The likelihood that an androgen-only clinical treatment will meaningfully increase women's sexual desire is minimal, and the focus of pharmaceutical companies on the development of androgen therapies for the treatment of female sexual desire disorders is likely misplaced. Copyright © 2015 Elsevier Inc. All rights reserved.

Choosing a doctor and hospital for your cancer treatment

Science.gov (United States)

... htm Choosing a doctor and hospital for your cancer treatment To use the sharing features on this page, please enable JavaScript. When you seek cancer treatment, you want to find the best care possible. ...

Step 7: Choose the "Best" Risk Management Alternative

Science.gov (United States)

The ultimate purpose of the SRM tactical phase is to choose how to manage risk. Prior to this stage, we determined the sources of risk, identified the relevant management actions and estimated the likelihood of all known outcomes. Next, we combine this information with your personal risk preference...

Grain boundary segregation and intergranular failure

International Nuclear Information System (INIS)

White, C.L.

1980-01-01

Trace elements and impurities often segregate strongly to grain boundaries in metals and alloys. Concentrations of these elements at grain boundaries are often 10 3 to 10 5 times as great as their overall concentration in the alloy. Because of such segregation, certain trace elements can exert a disproportionate influence on material properties. One frequently observed consequence of trace element segregation to grain boundaries is the occurrence of grain boundary failure and low ductility. Less well known are incidences of improved ductility and inhibition of grain boundary fracture resulting from trace element segregation to grain boundaries in certain systems. An overview of trace element segregation and intergranular failure in a variety of alloy systems as well as preliminary results from studies on Al 3% Li will be presented

Grain refinement of aluminum and its alloys

International Nuclear Information System (INIS)

Zaid, A.I.O.

2001-01-01

Grain refinement of aluminum and its alloys by the binary Al-Ti and Ternary Al-Ti-B master alloys is reviewed and discussed. The importance of grain refining to the cast industry and the parameters affecting it are presented and discussed. These include parameters related to the cast, parameters related to the grain refining alloy and parameters related to the process. The different mechanisms, suggested in the literature for the process of grain refining are presented and discussed, from which it is found that although the mechanism of refining by the binary Al-Ti is well established the mechanism of grain refining by the ternary Al-Ti-B is still a controversial matter and some research work is still needed in this area. The effect of the addition of other alloying elements in the presence of the grain refiner on the grain refining efficiency is also reviewed and discussed. It is found that some elements e.g. V, Mo, C improves the grain refining efficiency, whereas other elements e.g. Cr, Zr, Ta poisons the grain refinement. Based on the parameters affecting the grain refinement and its mechanism, a criterion for selection of the optimum grain refiner is forwarded and discussed. (author)

The effect of the Tom Thumb dwarfing gene on grain size and grain number of wheat (Triticum aestivum)

International Nuclear Information System (INIS)

Gale, M.D.; Flintham, J.E.

1984-01-01

The Tom Thumb dwarfing gene, Rht3, like the related genes Rht1 and Rht2 from Norin 10, has pleiotropic effects on individual ear yields, and grain protein concentrations. An experiment was conducted in which tiller number per plant and grain number per spike were restricted to ascertain whether reduced grain size and protein content are primary or secondary competitive effects in near-isogenic lines. The potential for grain growth was shown to be identical in Rht3 and rht genotypes when grain set was restricted, indicating that the primary effect of the gene is to increase spikelet fertility. Nitrogen accumulation within the grain was also affected by inter-grain competition but decreased nitrogen yields per plant indicated that reduced protein levels are, in part, a primary effect of the gene. Analysis of individual grain yields within Rht3 and rht spikes showed that the gene affected developmental 'dominance' relationships within the spike. (author)

SMALL GRAIN 1, which encodes a mitogen-activated protein kinase kinase 4, influences grain size in rice.

Science.gov (United States)

Duan, Penggen; Rao, Yuchun; Zeng, Dali; Yang, Yaolong; Xu, Ran; Zhang, Baolan; Dong, Guojun; Qian, Qian; Li, Yunhai

2014-02-01

Although grain size is one of the most important components of grain yield, little information is known about the mechanisms that determine final grain size in crops. Here we characterize rice small grain1 (smg1) mutants, which exhibit small and light grains, dense and erect panicles and comparatively slightly shorter plants. The short grain and panicle phenotypes of smg1 mutants are caused by a defect in cell proliferation. The smg1 mutations were identified, using a map-based cloning approach, in mitogen-activated protein kinase kinase 4 (OsMKK4). Relatively higher expression of OsMKK4/SMG1 was detected in younger organs than in older ones, consistent with its role in cell proliferation. Green fluorescent protein (GFP)-OsMKK4/SMG1 fusion proteins appear to be distributed ubiquitously in plant cells. Further results revealed that OsMKK4 influenced brassinosteroid (BR) responses and the expression of BR-related genes. Thus, our findings have identified OsMKK4 as a factor for grain size, and suggest a possible link between the MAPK pathways and BRs in grain growth. © 2013 The Authors The Plant Journal © 2013 John Wiley & Sons Ltd.

Autonomous grain combine control system

Science.gov (United States)

Hoskinson, Reed L.; Kenney, Kevin L.; Lucas, James R.; Prickel, Marvin A.

2013-06-25

A system for controlling a grain combine having a rotor/cylinder, a sieve, a fan, a concave, a feeder, a header, an engine, and a control system. The feeder of the grain combine is engaged and the header is lowered. A separator loss target, engine load target, and a sieve loss target are selected. Grain is harvested with the lowered header passing the grain through the engaged feeder. Separator loss, sieve loss, engine load and ground speed of the grain combine are continuously monitored during the harvesting. If the monitored separator loss exceeds the selected separator loss target, the speed of the rotor/cylinder, the concave setting, the engine load target, or a combination thereof is adjusted. If the monitored sieve loss exceeds the selected sieve loss target, the speed of the fan, the size of the sieve openings, or the engine load target is adjusted.

A Framework Proposal For Choosing A New Business Implementation Model In Henkel

OpenAIRE

Li, Tsz Wan

2015-01-01

Henkel's New Business team is a corporate venturing unit that explores corporate entrepreneurial activities on behalf of Henkel Adhesives Technologies. The new business ideas are implemented through one of these models: incubator, venturing or innovation ecosystem. In current practice, there is no systematic framework in place to choose the implementation model. The goal of the thesis is to propose a framework for choosing the most appropriate model for implementation of a new business idea i...

The valuation of commercial grain silos

African Journals Online (AJOL)

The valuation of grain silos is a complex exercise when one considers all the variables that affect their ... their grains, larger grain-processing companies, traders, importers or exporters that have ..... 2015: personal interview). The percentages ...

Exposure to grain dust and microbial components in the Norwegian grain and compound feed industry.

Science.gov (United States)

Halstensen, Anne Straumfors; Heldal, Kari Kulvik; Wouters, Inge M; Skogstad, Marit; Ellingsen, Dag G; Eduard, Wijnand

2013-11-01

The aim of this study was to extensively characterize grain workers' personal exposure during work in Norwegian grain elevators and compound feed mills, to identify differences in exposures between the workplaces and seasons, and to study the correlations between different microbial components. Samples of airborne dust (n = 166) were collected by full-shift personal sampling during work in 20 grain elevators and compound feed mills during one autumn season and two winter seasons. The personal exposure to grain dust, endotoxins, β-1→3-glucans, bacteria, and fungal spores was quantified. Correlations between dust and microbial components and differences between workplaces and seasons were investigated. Determinants of endotoxin and β-1→3-glucan exposure were evaluated by linear mixed-effect regression modeling. The workers were exposed to an overall geometric mean of 1.0mg m(-3) inhalable grain dust [geometric standard deviation (GSD) = 3.7], 628 endotoxin units m(-3) (GSD = 5.9), 7.4 µg m(-3) of β-1→3-glucan (GSD = 5.6), 21 × 10(4) bacteria m(-3) (GSD = 7.9) and 3.6 × 10(4) fungal spores m(-3) (GSD = 3.4). The grain dust exposure levels were similar across workplaces and seasons, but the microbial content of the grain dust varied substantially between workplaces. Exposure levels of all microbial components were significantly higher in grain elevators compared with all other workplaces. The grain dust exposure was significantly correlated (Pearson's r) with endotoxin (rp = 0.65), β-1→3-glucan (rp = 0.72), bacteria (rp = 0.44) and fungal spore (rp = 0.48) exposure, whereas the explained variances were strongly dependent on the workplace. Bacteria, grain dust, and workplace were important determinants for endotoxin exposure, whereas fungal spores, grain dust, and workplace were important determinants for β-1→3-glucan exposure. Although the workers were exposed to a relatively low mean dust level, the microbial exposure was high. Furthermore, the

Bleaching of the post-IR IRSL signal from individual grains of K-feldspar: Implications for single-grain dating

International Nuclear Information System (INIS)

Smedley, R.K.; Duller, G.A.T.; Roberts, H.M.

2015-01-01

Post-IR IRSL (pIRIR) signals from K-feldspar grains measured at elevated temperatures are increasingly being used for dating sediments. Unfortunately the pIRIR signal from K-feldspars bleaches more slowly than other signals (e.g. OSL from quartz) upon exposure to daylight, leading to concerns about residual signals remaining at deposition. However, earlier studies have not assessed whether the pIRIR signal bleaches at the same rate in all feldspar grains. In this study laboratory bleaching experiments have been conducted and for the first time the results show that the rate at which the pIRIR signal from individual K-feldspar grains bleach varies. To determine whether grain-to-grain variability in bleaching rate has a dominant control on equivalent dose (D e ) distributions determined using single grains, analysis was undertaken on three samples with independent age control from different depositional environments (two aeolian and one glaciofluvial). The D e value determined from each grain was compared with the rate at which the pIRIR 225 signal from the grain bleaches. The bleaching rate of each grain was assessed by giving a 52 Gy dose and measuring the residual D e after bleaching for an hour in a solar simulator. There is no clear relationship between the rate at which the pIRIR 225 signal of an individual grain bleaches and the magnitude of its D e . It is concluded that variability in the bleaching rate of the pIRIR 225 signal from one grain to another does not appear to be a dominant control on single grain D e distributions. - Highlights: • The bleaching rate of the pIRIR signal from single K-feldspar grains was assessed. • The pIRIR 225 signal bleaches more rapidly than the pIRIR 290 signal. • pIRIR 225 and pIRIR 290 signals reach the same level after 4–20 h of bleaching. • The bleaching rate of the pIRIR signal varies from one grain to another. • Variable pIRIR bleaching rates do not control single-grain D e distributions

Paedophilia, Sexual Desire, and Perversity.

Science.gov (United States)

Spiecker, Ben; Steutel, Jan

1997-01-01

Criticizes justifications given by pedophiles for having sex with children, including an analysis of "sexual desire" and "erotic." Raises the question of whether pedophile activities can ever be morally permissible. Uses principles of mutual consent and non-exploitation to answer negatively. Examines whether pedophile desires…

Decision Support System to Choose Digital Single Lens Camera with Simple Additive Weighting Method

Directory of Open Access Journals (Sweden)

Tri Pina Putri

2016-11-01

Full Text Available One of the technologies that evolve today is Digital Single Lens Reflex (DSLR camera. The number of products makes users have difficulties to choose the appropriate camera based on their criteria. Users may utilize several ways to help them choosing the intended camera such as using magazine, internet, and other media. This paper discusses about a web based decision support system to choose cameras by using SAW (Simple Additive Weighting method in order to make the decision process more effective and efficient. This system is expected to give recommendations about the camera which is appropriate with the user’s need and criteria based on the cost, the resolution, the feature, the ISO, and the censor. The system was implemented by using PHP and MySQL. Based on the result of questionnaire distributed to 20 respondents, 60% respondents agree that this decision support system can help users to choose the appropriate camera DSLR in accordance with the user’s need, 60% of respondents agree that this decision support system is more effective to choose DSLR camera and 75% of respondents agree that this system is more efficient. In addition, 60.55% of respondents agree that this system has met 5 Es Usability Framework.

Choosing Teaching Profession as a Career: Students' Reasons

Science.gov (United States)

Balyer, Aydin; Özcan, Kenan

2014-01-01

The success of educational change inevitably depends on the quality and performance of teachers. Therefore, the importance of employing high quality teachers is crucial for educational systems. Choosing talented and committed brains to teaching career depends on making it an attractive profession. It is considered that there are some reasons why…

Grain formation in cool stellar envelopes

International Nuclear Information System (INIS)

Deguchi, S.

1980-01-01

The nucleation and growth of dust grains in the stellar envelope are investigated for the case of oxygen-rich stars, where the mass loss occurs as a result of the radiation pressure on the dust grains. The number density of grains, the final grain sizes, and the final amount of metals remaining in gaseous states are calculated based on the grain-nucleation theory proposed by Yamamoto and Hasegawa and Draine and Salpeter. It is shown that, even if we base our calculations on the Lothe-Pound nucleation rate equation instead of the classical, homogeneous nucleation rate equation, the proposed theory gives a number density of grains quite similar to that based on the classical rate equation. The approximate solution of the flow, in this paper, brings physical insight to the problem of how the formation of grains couples the flow passing the sonic point. The metals in the outer envelope remain in gaseous state by the amount of 1--10% of the initial content for the mass-loss rate of 10 -5 M/sub sun/ yr -1 and by less than 1% for the massloss are less than 3 x 10 -6 M/sub sun/ yr -1 . Species of metals condensed onto the grains are also discussed

[Desire for a child and desired children--possibilities and limits of reproductive biomedicine].

Science.gov (United States)

Krones, Tanja; Neuwohner, Elke; El Ansari, Susan; Wissner, Thomas; Richter, Gerd

2006-03-01

Definition of problem: Reproductive Biomedicine and new reproductive technologies (ART) belong to the fields of medicine that initiated most of the discussion on enhancement and desire fulfilling medicine in bioethics during the last years. One of the crucial questions to be answered is the definition of the right to procreate/right for a genetically related child. Closely connected are controversial opinions in regard to the definition of sterility as a disease/illness, or a mere fate, or malfunction, which does not have to be medically cured. Arguments: After a cursory description of the national and international debate, we introduce some results of our 'bioethical field studies', exploring and comparing the views of experts (human geneticists, ethicists, pediatricians, obstetricians and midwifes) and couples/patients (IVF couples, high genetic risk couples and couples with no known risk for an inherited disease or infertility problem) on sterility, the right to procreate, possibilities and appropriate limits of IVF in Germany. According to the WHO, sterility has to be defined as an illness, if the respective couples have a desire for a child. IVF can be a means for a cure. Since 2004, Germany does no longer supply a thoroughly insurer financed IVF treatment. Our surveys indicate that this change, though supported by many experts, is hard to accept for couples concerned. Only obstetricians share the WHO's view that sterility should count as an illness. Many ethicists see a proclaimed human right to procreate as merely negative right, although many support free IVF treatment for poor couples. We challenge the expert majority view on the basis of the capability approach (Amartya Sen) and functional liberalism (Herlinde Pauer Studer) and with a view to the international state of the art in IVF. The desire to have children cannot be reduced to a non-authoritative preference whose fulfillment is optional, but has to be conceptualized as a normative need that ought to

Everyday temptations: an experience sampling study of desire, conflict, and self-control.

Science.gov (United States)

Hofmann, Wilhelm; Baumeister, Roy F; Förster, Georg; Vohs, Kathleen D

2012-06-01

How often and how strongly do people experience desires, to what extent do their desires conflict with other goals, and how often and successfully do people exercise self-control to resist their desires? To investigate desire and attempts to control desire in everyday life, we conducted a large-scale experience sampling study based on a conceptual framework integrating desire strength, conflict, resistance (use of self-control), and behavior enactment. A sample of 205 adults wore beepers for a week. They furnished 7,827 reports of desire episodes and completed personality measures of behavioral inhibition system/behavior activation system (BIS/BAS) sensitivity, trait self-control, perfectionism, and narcissistic entitlement. Results suggest that desires are frequent, variable in intensity, and largely unproblematic. Those urges that do conflict with other goals tend to elicit resistance, with uneven success. Desire strength, conflict, resistance, and self-regulatory success were moderated in multiple ways by personality variables as well as by situational and interpersonal factors such as alcohol consumption, the mere presence of others, and the presence of others who already had enacted the desire in question. Whereas personality generally had a stronger impact on the dimensions of desire that emerged early in its course (desire strength and conflict), situational factors showed relatively more influence on components later in the process (resistance and behavior enactment). In total, these findings offer a novel and detailed perspective on the nature of everyday desires and associated self-regulatory successes and failures. 2012 APA, all rights reserved

Multitrait, Random Regression, or Simple Repeatability Model in High-Throughput Phenotyping Data Improve Genomic Prediction for Wheat Grain Yield.

Science.gov (United States)

Sun, Jin; Rutkoski, Jessica E; Poland, Jesse A; Crossa, José; Jannink, Jean-Luc; Sorrells, Mark E

2017-07-01

High-throughput phenotyping (HTP) platforms can be used to measure traits that are genetically correlated with wheat ( L.) grain yield across time. Incorporating such secondary traits in the multivariate pedigree and genomic prediction models would be desirable to improve indirect selection for grain yield. In this study, we evaluated three statistical models, simple repeatability (SR), multitrait (MT), and random regression (RR), for the longitudinal data of secondary traits and compared the impact of the proposed models for secondary traits on their predictive abilities for grain yield. Grain yield and secondary traits, canopy temperature (CT) and normalized difference vegetation index (NDVI), were collected in five diverse environments for 557 wheat lines with available pedigree and genomic information. A two-stage analysis was applied for pedigree and genomic selection (GS). First, secondary traits were fitted by SR, MT, or RR models, separately, within each environment. Then, best linear unbiased predictions (BLUPs) of secondary traits from the above models were used in the multivariate prediction models to compare predictive abilities for grain yield. Predictive ability was substantially improved by 70%, on average, from multivariate pedigree and genomic models when including secondary traits in both training and test populations. Additionally, (i) predictive abilities slightly varied for MT, RR, or SR models in this data set, (ii) results indicated that including BLUPs of secondary traits from the MT model was the best in severe drought, and (iii) the RR model was slightly better than SR and MT models under drought environment. Copyright © 2017 Crop Science Society of America.

Deformation strain inhomogeneity in columnar grain nickel

DEFF Research Database (Denmark)

Wu, G.L.; Godfrey, A.; Juul Jensen, D.

2005-01-01

A method is presented for determination of the local deformation strain of individual grains in the bulk of a columnar grain sample. The method, based on measurement of the change in grain area of each grain, is applied to 12% cold rolled nickel. Large variations are observed in the local strain...... associated with each grain. (c) 2005 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved....

Randomly grain growth in metallic materials

Energy Technology Data Exchange (ETDEWEB)

Ramirez, A. [Instituto Politecnico Nacional, (SEPI-ESIME), Unidad Profesional Ticoman, Av. Ticoman 600, Del. G.A.M., C.P. 07340 Distrito Federal, Mexico (Mexico); Instituto Politecnico Nacional, (SEPI-ESIQIE), Unidad Profesional Zacatenco, Edif. 6 y Edif. Z planta baja C.P.07300, Distrito Federal, Mexico (Mexico)], E-mail: adaramil@yahoo.com.mx; Chavez, F. [Instituto Politecnico Nacional, (SEPI-ESIQIE), Unidad Profesional Zacatenco, Edif. 6 y Edif. Z planta baja C.P.07300, Distrito Federal, Mexico (Mexico); Demedices, L. [Instituto Politecnico Nacional, (SEPI-ESIME), Unidad Profesional Ticoman, Av. Ticoman 600, Del. G.A.M., C.P. 07340 Distrito Federal, Mexico (Mexico); Instituto Politecnico Nacional, (SEPI-ESIQIE), Unidad Profesional Zacatenco, Edif. 6 y Edif. Z planta baja C.P.07300, Distrito Federal, Mexico (Mexico); Cruz, A.; Macias, M. [Instituto Politecnico Nacional, (SEPI-ESIQIE), Unidad Profesional Zacatenco, Edif. 6 y Edif. Z planta baja C.P.07300, Distrito Federal, Mexico (Mexico)

2009-10-30

Computational modeling of grain structures is a very important topic in materials science. In this work, the development of the computational algorithms for a mathematical model to predict grain nucleation and grain growth is presented. The model place a number of nucleated points randomly in a liquid pool according with the solid and liquid fractions (X{sub sol} and X{sub liq}) of metal solute and the local temperature distribution (SS{sub I,J}). Then these points grows isotropically until obtain a grain structure with straight interfaces. Different grain morphologies such as columnar and equiaxed can be obtained as a function of the temperature distributions and growth directions.

Randomly grain growth in metallic materials

International Nuclear Information System (INIS)

Ramirez, A.; Chavez, F.; Demedices, L.; Cruz, A.; Macias, M.

2009-01-01

Computational modeling of grain structures is a very important topic in materials science. In this work, the development of the computational algorithms for a mathematical model to predict grain nucleation and grain growth is presented. The model place a number of nucleated points randomly in a liquid pool according with the solid and liquid fractions (X sol and X liq ) of metal solute and the local temperature distribution (SS I,J ). Then these points grows isotropically until obtain a grain structure with straight interfaces. Different grain morphologies such as columnar and equiaxed can be obtained as a function of the temperature distributions and growth directions.

What procedure to choose while designing a fuzzy control? Towards mathematical foundations of fuzzy control

Science.gov (United States)

Kreinovich, Vladik YA.; Quintana, Chris; Lea, Robert

1991-01-01

Fuzzy control has been successfully applied in industrial systems. However, there is some caution in using it. The reason is that it is based on quite reasonable ideas, but each of these ideas can be implemented in several different ways, and depending on which of the implementations chosen different results are achieved. Some implementations lead to a high quality control, some of them not. And since there are no theoretical methods for choosing the implementation, the basic way to choose it now is experimental. But if one chooses a method that is good for several examples, there is no guarantee that it will work fine in all of them. Hence the caution. A theoretical basis for choosing the fuzzy control procedures is provided. In order to choose a procedure that transforms a fuzzy knowledge into a control, one needs, first, to choose a membership function for each of the fuzzy terms that the experts use, second, to choose operations of uncertainty values that corresponds to 'and' and 'or', and third, when a membership function for control is obtained, one must defuzzy it, that is, somehow generate a value of the control u that will be actually used. A general approach that will help to make all these choices is described: namely, it is proved that under reasonable assumptions membership functions should be linear or fractionally linear, defuzzification must be described by a centroid rule and describe all possible 'and' and 'or' operations. Thus, a theoretical explanation of the existing semi-heuristic choices is given and the basis for the further research on optimal fuzzy control is formulated.

Production of Al-Ti-B grain refining master alloys from Na{sub 2}B{sub 4}O{sub 7} and K{sub 2}TiF{sub 6}

Energy Technology Data Exchange (ETDEWEB)

Birol, Yuecel [Materials Institute, Marmara Research Center, TUBITAK, Gebze, Kocaeli (Turkey)], E-mail: yucel.birol@mam.gov.tr

2008-06-30

It is very desirable to replace the KBF{sub 4} salt in the popular 'halide salt' process to reduce the volume of fluoride salts to be added to molten aluminium in the production of Al-Ti-B grain refiners. Being over 2 times richer in B, Na{sub 2}B{sub 4}O{sub 7} is a promising replacement for KBF{sub 4}, and is used in the present work to produce Al-Ti-B grain refiner master alloys. A fraction of the aluminide particles were entrapped in the spent salt giving a relatively lower Ti recovery when KBF{sub 4} was replaced by Na{sub 2}B{sub 4}O{sub 7}. The grain refining performance of the Al-Ti-B grain refiner alloy thus produced was nevertheless acceptable. The spent salt became too viscous with the oxides, aluminides and borides to be removed by decanting when Na{sub 2}B{sub 4}O{sub 7}.5H{sub 2}O was used to supply boron. The viscous spent salt, entrained in the grain refiner alloy, did not only impair its performance, but also hurt the fluidity of the molten alloy and made pouring difficult.

Using Emotionally Focused Therapy to Treat Sexual Desire Discrepancy in Couples.

Science.gov (United States)

Girard, Abby; Woolley, Scott R

2017-11-17

Couples in committed relationships encounter a multitude of issues. According to Metz and McCarthy (2010), when couples report high sexual satisfaction, it accounts for 15% to 20% of their overall relationship satisfaction. However, when couples report low sexual satisfaction, it contributes 50% to 70% of their overall satisfaction with their partner. Issues of sexual desire, currently referred to as sexual desire discrepancy, are among the most difficult to treat. Although there are many factors contributing to the issue of sexual desire discrepancy, current literature highlights the importance of emotional intimacy as an outcome and predictor of increased sexual desire. Given the complex nature of sexual desire, clinicians often lack the understanding and treatment options that are systemic. By viewing sexual desire discrepancy as a relational problem that can be treated using emotionally focused therapy, clinicians are better equipped to work with emotional and sexual factors that impact desire and couple distress.

Choosing the right technology

DEFF Research Database (Denmark)

Milan, Christian; Nielsen, Mads Pagh; Bojesen, Carsten

2014-01-01

The use of renewable energy sources (RES) has continuously increased throughout the last decade. In the residential building sector the trend goes towards energy supply systems based on multiple RES. This is mainly due to political requirements, governmental subsidies and fuel price development....... These systems not only require an optimal design with respect to the installed capacities but also the right choice in combining the available technologies assuring a cost-effective solution. e aim of this paper is to present an optimization methodology for residential on-site energy supply systems based...... on mixed integer linear programming. The methodology chooses the right combination of technologies and sizes the components based on on-site weather data and expected consumption profiles. Through this approach the fluctuations of RES as well as the user behavior are taken into account already during...

From desires to behavior: Moderating factors in a fertility transition

Directory of Open Access Journals (Sweden)

Sarah R. Hayford

2012-05-01

Full Text Available BACKGROUND Extensive research in both developed and developing countries has shown that preferences and intentions for future childbearing predict behavior. However, very little of this research has examined high-fertility contexts in sub-Saharan Africa. In particular, the factors that increase or decrease correspondence between fertility desires and behavior in these settings are not well understood. OBJECTIVE This article documents the degree to which the desire to stop childbearing predicts fertility behavior over the short term among married women in rural southern Mozambique, a context where fertility transition is still in the early stages. Analyses test the moderating powers of individual, household, and community characteristics. METHODS Analyses use data from a longitudinal survey of married women of reproductive age (N=1678 carried out in 2006 and 2009 in rural areas of southern Mozambique. Logistic regression models are estimated to predict childbearing between 2006 and 2009 based on desires to stop childbearing and characteristics measured in 2006. RESULTS As expected, the desire to stop childbearing is strongly predictive of fertility behavior. Household wealth, local adult AIDS mortality, and being married to an unsuccessful labor migrant are associated with higher correspondence between reported desire to stop childbearing and fertility behavior. CONCLUSIONS Both factors related to the ability to carry out desires to stop childbearing and factors related to the strength and consistency of these desires moderate the association between desires and behaviors. Future research should expand measurement of fertility preferences to incorporate their strength and consistency as well as direction.

A few philosophical ruminations on the human condition and choosing to live well

Directory of Open Access Journals (Sweden)

Blake E. Hestir

2008-06-01

Full Text Available The notion that life is meaningful through choosing to live well has historically received substantive attention in various philosophical circles, notably the ancient Greek philosophers Socrates, Plato, and Aristotle, and more recently several of the existentialists. In some respects, the idea of choosing to live well is a “thematization” of two widely-recognized, independent components of a meaningful life: happiness and authenticity. I develop this notion of choosing to live well by exploring, developing, and relating these conceptions of happiness and authenticity. By appealing to a very basic account of human nature that has found favor among a great number of people, I show how happiness and authenticity complement each other as conditions for the possibility of living meaningfully.

Desire for autonomy in health care decisions: a general population survey.

Science.gov (United States)

Cullati, Stéphane; Courvoisier, Delphine S; Charvet-Bérard, Agathe I; Perneger, Thomas V

2011-04-01

To examine factors associated with desire for autonomy in health care decisions in the general population. Mailed survey of 2348 residents of Geneva, Switzerland. Participants answered questions on a scale measuring their desire for autonomy in health care decisions. The scale was scored between 0 (lowest desire for autonomy) and 100 (highest desire for autonomy). On average the respondents favoured shared or active involvement in medical decisions (mean score 62.0, SD 20.9), but attitudes varied considerably. In the multivariate model, factors associated with a higher desire for autonomy included female gender, younger age, higher education, living alone, reporting an excellent global health and - a new observation compared to previous studies - having made several medical decisions in the past 6 months. The attitudes of the general public appear to be consistent with the model of shared decision making. However, people vary considerably in their desire for autonomy. An explicit assessment of each individual's desire for autonomy may improve the decision-making process. Such an assessment should be repeated regularly, as familiarity with medical decisions may increase the desire for autonomy. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Violation of eating expectancies does not reduce conditioned desires for chocolate.

Science.gov (United States)

van den Akker, Karolien; van den Broek, Myrr; Havermans, Remco C; Jansen, Anita

2016-05-01

Although eating desires can be easily learned, their extinction appears more difficult. The present two-session study aimed to investigate the role of eating expectancies in the short and longer-term extinction of eating desires. In addition, the relationship between eating desires and conditioned evaluations was examined to test whether they might share a similar mechanism. It was hypothesized that the short-term extinction of eating desires would be more successful after the disconfirmation of eating expectancies (instructed extinction or IE), while resulting in worse longer-term extinction because omission of the food reward during extinction is not surprising. In contrast to the hypotheses, it was found that IE had no effect on the short-term and longer-term extinction of eating desires. Eating desires correlated with conditioned evaluations only to some extent. It is concluded that eating expectancies do not mediate the short-term extinction of conditioned eating desires. In addition, their longer-term extinction does not appear to be facilitated by a greater violation of eating expectancies. This suggests that it might not be necessary to focus on expectancy violation in cue exposure therapy to reduce eating desires. Copyright © 2016 Elsevier Ltd. All rights reserved.

Normal and abnormal grain growth in fine-grained Nd-Fe-B sintered magnets prepared from He jet milled powders

Energy Technology Data Exchange (ETDEWEB)

Bittner, F., E-mail: f.bittner@ifw-dresden.de [IFW Dresden, Institute for Metallic Materials, PO Box 270116, 01171 Dresden (Germany); Technische Universität Dresden, Institute of Materials Science, 01062 Dresden (Germany); Woodcock, T.G. [IFW Dresden, Institute for Metallic Materials, PO Box 270116, 01171 Dresden (Germany); Schultz, L. [IFW Dresden, Institute for Metallic Materials, PO Box 270116, 01171 Dresden (Germany); Technische Universität Dresden, Institute of Materials Science, 01062 Dresden (Germany); Schwöbel, C. [Technische Universität Darmstadt, Materialwissenschaft, Alarich-Weiß-Str. 16, 64287 Darmstadt (Germany); Gutfleisch, O. [Technische Universität Darmstadt, Materialwissenschaft, Alarich-Weiß-Str. 16, 64287 Darmstadt (Germany); Fraunhofer ISC, Projektgruppe für Werkstoffkreisläufe und Ressourcenstrategie IWKS, Rodenbacher Chaussee 4, 63457 Hanau (Germany); Zickler, G.A.; Fidler, J. [Technische Universität Wien, Institute of Solid State Physics, Wiedner Hauptstr. 8-10, 1040 Wien (Austria); Üstüner, K.; Katter, M. [Vacuumschmelze GmbH & Co. KG, 63412 Hanau (Germany)

2017-03-15

Fine-grained, heavy rare earth free Nd-Fe-B sintered magnets were prepared from He jet milled powders with an average particle size of 1.5 µm by low temperature sintering at 920 °C or 980 °C. A coercivity of >1600 kA/m was achieved for an average grain size of 1.68 µm. Transmission electron microscopy showed that the distribution and composition of intergranular and grain boundary junction phases was similar to that in conventionally processed magnets. Microstructural analysis on different length scales revealed the occurrence of abnormal grain growth, which is unexpected for sintering temperatures below 1000 °C. A larger area fraction of abnormal grains was observed in the sample sintered at 920 °C compared to that sintered at 980 °C. Microtexture investigation showed a better crystallographic alignment of the abnormal grains compared to the fine-grained matrix, which is explained by a size dependent alignment of the powder particles during magnetic field alignment prior to sintering. Slightly larger particles in the initial powder show a better alignment and will act as nucleation sites for abnormal grain growth. Magneto-optical Kerr investigations confirmed the lower switching field of the abnormal grains compared to the fine-grained matrix. The demagnetisation curve of the sample sintered at 920 °C showed reduced rectangularity and this was attributed to a cooperative effect of the larger fraction of abnormal grains with low switching field and, as a minor effect, a reduced degree of crystallographic texture in this sample compared to the material sintered at 980 °C, which did not show the reduced rectangularity of the demagnetisation curve. - Highlights: • He Jet milling to reduce Nd-Fe-B grain size and to enhance coercivity. • Normal and abnormal grain growth observed for low temperature sintering. • Well oriented abnormal grown grains explained by size dependent field alignment. • Poor rectangularity is caused by low nucleation field of

Normal and abnormal grain growth in fine-grained Nd-Fe-B sintered magnets prepared from He jet milled powders

International Nuclear Information System (INIS)

Bittner, F.; Woodcock, T.G.; Schultz, L.; Schwöbel, C.; Gutfleisch, O.; Zickler, G.A.; Fidler, J.; Üstüner, K.; Katter, M.

2017-01-01

Fine-grained, heavy rare earth free Nd-Fe-B sintered magnets were prepared from He jet milled powders with an average particle size of 1.5 µm by low temperature sintering at 920 °C or 980 °C. A coercivity of >1600 kA/m was achieved for an average grain size of 1.68 µm. Transmission electron microscopy showed that the distribution and composition of intergranular and grain boundary junction phases was similar to that in conventionally processed magnets. Microstructural analysis on different length scales revealed the occurrence of abnormal grain growth, which is unexpected for sintering temperatures below 1000 °C. A larger area fraction of abnormal grains was observed in the sample sintered at 920 °C compared to that sintered at 980 °C. Microtexture investigation showed a better crystallographic alignment of the abnormal grains compared to the fine-grained matrix, which is explained by a size dependent alignment of the powder particles during magnetic field alignment prior to sintering. Slightly larger particles in the initial powder show a better alignment and will act as nucleation sites for abnormal grain growth. Magneto-optical Kerr investigations confirmed the lower switching field of the abnormal grains compared to the fine-grained matrix. The demagnetisation curve of the sample sintered at 920 °C showed reduced rectangularity and this was attributed to a cooperative effect of the larger fraction of abnormal grains with low switching field and, as a minor effect, a reduced degree of crystallographic texture in this sample compared to the material sintered at 980 °C, which did not show the reduced rectangularity of the demagnetisation curve. - Highlights: • He Jet milling to reduce Nd-Fe-B grain size and to enhance coercivity. • Normal and abnormal grain growth observed for low temperature sintering. • Well oriented abnormal grown grains explained by size dependent field alignment. • Poor rectangularity is caused by low nucleation field of

Choosing of optimal start approximation for laplace equation ...

African Journals Online (AJOL)

We investigate Dirichlet problem for a case of two-dimensional area with lime border, numerical scheme for solving this equation is widely knowns it finite difference method. One of the major stages in the algorithm for that numerical solution is choosing of start approximation, usually as the initial values of the unknown ...

Influence at work and the desire for more influence

DEFF Research Database (Denmark)

Markey, Raymond; Ravenswood, Katherine; Webber, Don J.

2013-01-01

What determines whether workers want more influence in their workplace? Much of the literature on employee voice assumes that employees desire a say in how they do their work, and that where they lack influence they are more likely to desire a greater say. This econometric study of 536 Danish...... and New Zealand employees in four industries indicates that workers’ desire for more influence was not dependent on how much influence they thought they already had. What mattered was age, length of service and specific organisational characteristics. Those who wanted more influence were not learning new...... things and did not feel that they received sufficient information about the workplace, and those who felt appreciated by management did not desire more influence. The results support human resource management literature that suggests the importance of integrated and mutually supportive ‘bundles...

Signification, communication, and the subject of desire

Directory of Open Access Journals (Sweden)

Flávio Vinicius Cauduro

2008-11-01

Full Text Available Abstract Every product of design must evoke appropriate sensorial and symbolic resonances in the subjects to which it is offered, not simply by satisfying to their specific .rational. needs but mainly by appealing to their 'irrational' desires. Thus, a successful product is one that evokes a polymorphous, complex 'image' of itself in people's minds, onto which targeted subjects may project their respective desires. According to Lacan.s theories, therefore, any successful product is one that becomes a mediating sign between the conscious subject and his unconcious 'object' of desire, which means that products are consumed not merely for their 'objective' properties, as commodities, but as brands imbued with specific images and fantasies. Keywords: signification; desire; design Resumo Significação, comunicação e o sujeito do desejo - Todo produto de design precisa despertar ressonâncias sensoriais e simbólicas apropriadas nos sujeitos aos quais se oferece. Não simplesmente apelando para necessidades racionais específicas de seus consumidores em potencial, mas principalmente se dirigindo aos seus desejos. Por isso, qualquer produto de sucesso, de acordo com as teorias de Lacan, é aquele que se torna um signo mediador entre o sujeito consciente e seu inconsciente 'objeto' de desejo, o que significa que produtos não são simplesmente consumidos por suas propriedades 'objetivas', como mercadorias, mas como marcas, com imagens e fantasias específicas. Palavras-chave: significação; desejo; design

Physical properties of five grain dust types.

OpenAIRE

Parnell, C B; Jones, D D; Rutherford, R D; Goforth, K J

1986-01-01

Physical properties of grain dust derived from five grain types (soybean, rice, corn, wheat, and sorghum) were measured and reported. The grain dusts were obtained from dust collection systems of terminal grain handling facilities and were assumed to be representative of grain dust generated during the handling process. The physical properties reported were as follows: particle size distributions and surface area measurements using a Coulter Counter Model TAII; percent dust fractions less tha...

Efficient radiative transfer in dust grain mixtures

OpenAIRE

Wolf, S.

2002-01-01

The influence of a dust grain mixture consisting of spherical dust grains with different radii and/or chemical composition on the resulting temperature structure and spectral energy distribution of a circumstellar shell is investigated. The comparison with the results based on an approximation of dust grain parameters representing the mean optical properties of the corresponding dust grain mixture reveal that (1) the temperature dispersion of a real dust grain mixture decreases substantially ...

Educational Vouchers: Freedom to Choose?

Directory of Open Access Journals (Sweden)

Jordan Reel

2013-12-01

Full Text Available Milton Friedman is famous for his book title: “Free to Choose.” He also favors educational vouchers, which denies the freedom to choose to people who do not wish to subsidize the education of other people’s children. Thus, he is guilty of a logical contradiction. Why is it important to assess whether Friedman’s views on educational vouchers are logically consistent with his widespread reputation as an advocate of free enterprise, and, thus, freedom to chose? It is important to assess all figures in political economy, and indeed all of scholarship, for logical consistency. It is particularly important to do so in the present case, given the prestige in certain quarters accorded to this Nobel prize-winning economist. We argue in this paper that Friedman’s reputation for logical consistency, and adherence to the philosophy of laissez faire capitalism, are both overblown. Our solution to this challenge is to completely privatize education. Friedman does not advocate that vouchers be utilized for food, clothing or shelter; we see no relevant difference in the case of education. What is the justification of the undertaken topic? This topic is important because education of the next generation is crucial for the upkeep and improvement of society. What is the aim of the present study? It is to demonstrate that the solution offered by M. Friedman and R. Friedman (1990 is highly problematic. What is the methodology used in the study? We quote from this author, and criticize his analysis. What are our main results and conclusions/recommendations? We conclude that the last best hope for the educational industry is laissez faire capitalism, not the mixed economy recommended by Friedman.

UO2 Grain Growth: Developing Phase Field Models for Pore Dragging, Solute Dragging and Anisotropic Grain Boundary Energies

International Nuclear Information System (INIS)

Ahmed, K.; Tonks, M.; Zhang, Y.; Biner, B.

2016-01-01

A detailed phase field model for the effect of pore drag on grain growth kinetics was implemented in MARMOT. The model takes into consideration both the curvature-driven grain boundary motion and pore migration by surface diffusion. As such, the model accounts for the interaction between pore and grain boundary kinetics, which tends to retard the grain growth process. Our 2D and 3D simulations demonstrate that the model capture all possible pore-grain boundary interactions proposed in theoretical models. For high enough surface mobility, the pores move along with the migrating boundary as a quasi-rigid-body, albeit hindering its migration rate compared to the pore-free case. For less mobile pores, the migrating boundary can separate from the pores. For the pore-controlled grain growth kinetics, the model predicts a strong dependence of the growth rate on the number of pores, pore size, and surface diffusivity in agreement with theroretical models. An evolution equation for the grain size that includes these parameters was derived and showed to agree well with numerical solution. It shows a smooth transition from boundary-controlled kinetics to pore-controlled kinetics as the surface diffusivity decreases or the number of pores or their size increases. This equation can be utilized in BISON to give accurate estimate for the grain size evolution. This will be accomplished in the near future. The effect of solute drag and anisotropy of grain boundary on grain growth will be investigated in future studies.

Physics of dust grains in hot gas

International Nuclear Information System (INIS)

Draine, B.T.; Salpeter, E.E.

1979-01-01

Charging of dust grains in hot (10 4 --10 9 K) plasma is studied, including photoelectron and secondary electron emission, field emission, and transmission of electrons and ions through the grain; resulting grain potentials are (for T > or approx. = 10 5 K) considerably smaller in magnitude than found by Burke and Silk. Even so, large electrostatic stresses can cause ion field emission and rapid destruction of small grains in very hot gas. Rapid rotation can also disrupt small grains, but damping (by microwave emission) usually limits the centrifugal stress to acceptable values for plasma densities n/sub H/ -3 . Sputtering rates are estimated for grains in hot gas, based upon a semiempirical fit to experimental data. Predicted sputtering rates for possible grain constituents are similar to estimates by Barlow, but in some cases differ significantly. Useful approximation formulae are given for the drag forces acting on a grain with arbitrary Mach number

Managing for Multifunctionality in Perennial Grain Crops

Science.gov (United States)

Ryan, Matthew R; Crews, Timothy E; Culman, Steven W; DeHaan, Lee R; Hayes, Richard C; Jungers, Jacob M; Bakker, Matthew G

2018-01-01

Abstract Plant breeders are increasing yields and improving agronomic traits in several perennial grain crops, the first of which is now being incorporated into commercial food products. Integration strategies and management guidelines are needed to optimize production of these new crops, which differ substantially from both annual grain crops and perennial forages. To offset relatively low grain yields, perennial grain cropping systems should be multifunctional. Growing perennial grains for several years to regenerate soil health before rotating to annual crops and growing perennial grains on sloped land and ecologically sensitive areas to reduce soil erosion and nutrient losses are two strategies that can provide ecosystem services and support multifunctionality. Several perennial cereals can be used to produce both grain and forage, and these dual-purpose crops can be intercropped with legumes for additional benefits. Highly diverse perennial grain polycultures can further enhance ecosystem services, but increased management complexity might limit their adoption. PMID:29662249

Stress-driven grain growth

CSIR Research Space (South Africa)

Nabarro, FRN

1998-11-13

Full Text Available of length b (1+ epsilon) is parallel to sigma, embedded in a grain in which the lattice vector b (1+ epsilon) is transverse to sigma. If the embedded grain grows at the expense of its matrix, the source of the stress will do work, and therefore the presence...

First-year dental students' motivation and attitudes for choosing the dental profession.

Science.gov (United States)

Avramova, Nadya; Yaneva, Krassimira; Bonev, Boyko

2014-01-01

To determine first-year dental students' current motivation and attitudes for choosing the dental profession at the Faculty of Dental Medicine, Medical University - Sofia, Bulgaria. An anonymous questionnaire, consisting of 12 questions about students' socio-demographic profile and their motivation for choosing dentistry, was administered to 119 first-year dental students at the Faculty of Dental Medicine of the Medical University of Sofia. The study was conducted at the beginning of the 2012-2013 academic year. The data was processed and analyzed with the following software: Microsoft Windows Server 2008 R2; Microsoft SQL Server 2008; Internet Information Server 7.5.; Microsoft SharePoint Server 2010. The majority of the students (73%) were self-motivated for choosing dentistry as a career; 61% of them did not have relatives in the medical profession; 43% chose dental medicine because it is a prestigious, humane and noble profession; 50% - for financial security; 59% - because of the independence that it provides. There were no significant differences in the motivation between males and females. Independence, financial security and 'prestige' were the predominant motivating factors in this group of first-year dental students. Determining the reasons for choosing dentistry has important implications for the selection and training of students as well as for their future job satisfaction. Copyright © 2014 by Academy of Sciences and Arts of Bosnia and Herzegovina.

TECHNICAL JUSTIFICATION FOR CHOOSING PROPANE AS A CALIBRATION AGENT FOR TOTAL FLAMMABLE VOLATILE ORGANIC COMPOUND (VOC) DETERMINATIONS

International Nuclear Information System (INIS)

DOUGLAS, J.G.

2006-01-01

This document presents the technical justification for choosing and using propane as a calibration standard for estimating total flammable volatile organic compounds (VOCs) in an air matrix. A propane-in-nitrogen standard was selected based on a number of criteria: (1) has an analytical response similar to the VOCs of interest, (2) can be made with known accuracy and traceability, (3) is available with good purity, (4) has a matrix similar to the sample matrix, (5) is stable during storage and use, (6) is relatively non-hazardous, and (7) is a recognized standard for similar analytical applications. The Waste Retrieval Project (WRP) desires a fast, reliable, and inexpensive method for screening the flammable VOC content in the vapor-phase headspace of waste containers. Table 1 lists the flammable VOCs of interest to the WRP. The current method used to determine the VOC content of a container is to sample the container's headspace and submit the sample for gas chromatography--mass spectrometry (GC-MS) analysis. The driver for the VOC measurement requirement is safety: potentially flammable atmospheres in the waste containers must be allowed to diffuse prior to processing the container. The proposed flammable VOC screening method is to inject an aliquot of the headspace sample into an argon-doped pulsed-discharge helium ionization detector (Ar-PDHID) contained within a gas chromatograph. No actual chromatography is performed; the sample is transferred directly from a sample loop to the detector through a short, inert transfer line. The peak area resulting from the injected sample is proportional to the flammable VOC content of the sample. However, because the Ar-PDHID has different response factors for different flammable VOCs, a fundamental assumption must be made that the agent used to calibrate the detector is representative of the flammable VOCs of interest that may be in the headspace samples. At worst, we desire that calibration with the selected calibrating

Iron and zinc complexation in wild-type and ferritin-expressing wheat grain: implications for mineral transport into developing grain

DEFF Research Database (Denmark)

Neal, Andrew L; Geraki, Kalotina; Borg, Søren

2013-01-01

of modified complexation of both metals in transgenic grain overexpressing wheat ferritin. For zinc, there is a consistent doubling of the number of complexing phosphorus atoms. Although there is some EXAFS evidence for iron phytate in ferritin-expressing grain, there is also evidence of a structure lacking......We have used synchrotron-based X-ray fluorescence and absorption techniques to establish both metal distribution and complexation in mature wheat grains. In planta, extended X-ray absorption fine structure (EXAFS) spectroscopy reveals iron phytate and zinc phytate structures in aleurone cells...... of ferritin-expressing grains is quite different from that in wild-type grain. This may explain why the raised levels of minerals transported to the developing grain accumulate within the crease region of the transgenic grain....

From simple desires to ordinary beliefs: the early development of everyday psychology.

Science.gov (United States)

Wellman, H M; Woolley, J D

1990-06-01

We provide evidence for the claim that before young children construe human action in terms of beliefs and desires they understand action only in terms of simple desires. This type of naive psychology--a simple desire psychology--constitutes a coherent understanding of human action, but it differs from the belief--desire psychology of slightly older children and adults. In this paper we characterize what we mean by a simple desire psychology and report two experiments. In Experiment 1 we demonstrate that 2-year-old can predict actions and reactions related to simple desires. In Experiment 2 we demonstrate that many 2-year-old pass desire reasoning tasks while at the same time failing belief reasoning tasks that are passed by slightly older children, and that are as comparable as possible to the desire tasks they pass with ease.

SPIRAL2/DESIR high resolution mass separator

Energy Technology Data Exchange (ETDEWEB)

Kurtukian-Nieto, T., E-mail: kurtukia@cenbg.in2p3.fr [Centre d’Études Nucléaires de Bordeaux Gradignan, Université Bordeaux 1-CNRS/IN2P3, BP 120, F-33175 Gradignan Cedex (France); Baartman, R. [TRIUMF, 4004 Wesbrook Mall, Vancouver B.C., V6T 2A3 (Canada); Blank, B.; Chiron, T. [Centre d’Études Nucléaires de Bordeaux Gradignan, Université Bordeaux 1-CNRS/IN2P3, BP 120, F-33175 Gradignan Cedex (France); Davids, C. [Physics Division, Argonne National Laboratory, Argonne, IL 60439 (United States); Delalee, F. [Centre d’Études Nucléaires de Bordeaux Gradignan, Université Bordeaux 1-CNRS/IN2P3, BP 120, F-33175 Gradignan Cedex (France); Duval, M. [GANIL, CEA/DSM-CNRS/IN2P3, Bd Henri Becquerel, BP 55027, F-14076 Caen Cedex 5 (France); El Abbeir, S.; Fournier, A. [Centre d’Études Nucléaires de Bordeaux Gradignan, Université Bordeaux 1-CNRS/IN2P3, BP 120, F-33175 Gradignan Cedex (France); Lunney, D. [CSNSM-IN2P3-CNRS, Université de Paris Sud, F-91405 Orsay (France); Méot, F. [BNL, Upton, Long Island, New York (United States); Serani, L. [Centre d’Études Nucléaires de Bordeaux Gradignan, Université Bordeaux 1-CNRS/IN2P3, BP 120, F-33175 Gradignan Cedex (France); Stodel, M.-H.; Varenne, F. [GANIL, CEA/DSM-CNRS/IN2P3, Bd Henri Becquerel, BP 55027, F-14076 Caen Cedex 5 (France); and others

2013-12-15

DESIR is the low-energy part of the SPIRAL2 ISOL facility under construction at GANIL. DESIR includes a high-resolution mass separator (HRS) with a designed resolving power m/Δm of 31,000 for a 1 π-mm-mrad beam emittance, obtained using a high-intensity beam cooling device. The proposed design consists of two 90-degree magnetic dipoles, complemented by electrostatic quadrupoles, sextupoles, and a multipole, arranged in a symmetric configuration to minimize aberrations. A detailed description of the design and results of extensive simulations are given.

Windows PowerShell desired state configuration revealed

CERN Document Server

Chaganti, Ravikanth

2014-01-01

Desired State Configuration (DSC) is a powerful new configuration management platform that makes it easier than ever to perform cross-platform configuration management of your infrastructure, whether on-premise or in the cloud. DSC provides the management platform and Application Programming Interface (API) that can be used with any programming language. Windows PowerShell Desired State Configuration Revealed will take you through this new technology from start to finish and demonstrates the DSC interfaces through Windows PowerShell. DSC allows you to manage target devices by simply declarin

The Relevance of Grain Dissection for Grain Size Reduction in Polar Ice: Insights from Numerical Models and Ice Core Microstructure Analysis

Directory of Open Access Journals (Sweden)

Florian Steinbach

2017-09-01

Full Text Available The flow of ice depends on the properties of the aggregate of individual ice crystals, such as grain size or lattice orientation distributions. Therefore, an understanding of the processes controlling ice micro-dynamics is needed to ultimately develop a physically based macroscopic ice flow law. We investigated the relevance of the process of grain dissection as a grain-size-modifying process in natural ice. For that purpose, we performed numerical multi-process microstructure modeling and analyzed microstructure and crystallographic orientation maps from natural deep ice-core samples from the North Greenland Eemian Ice Drilling (NEEM project. Full crystallographic orientations measured by electron backscatter diffraction (EBSD have been used together with c-axis orientations using an optical technique (Fabric Analyser. Grain dissection is a feature of strain-induced grain boundary migration. During grain dissection, grain boundaries bulge into a neighboring grain in an area of high dislocation energy and merge with the opposite grain boundary. This splits the high dislocation-energy grain into two parts, effectively decreasing the local grain size. Currently, grain size reduction in ice is thought to be achieved by either the progressive transformation from dislocation walls into new high-angle grain boundaries, called subgrain rotation or polygonisation, or bulging nucleation that is assisted by subgrain rotation. Both our time-resolved numerical modeling and NEEM ice core samples show that grain dissection is a common mechanism during ice deformation and can provide an efficient process to reduce grain sizes and counter-act dynamic grain-growth in addition to polygonisation or bulging nucleation. Thus, our results show that solely strain-induced boundary migration, in absence of subgrain rotation, can reduce grain sizes in polar ice, in particular if strain energy gradients are high. We describe the microstructural characteristics that can be

The relevance of grain dissection for grain size reduction in polar ice: insights from numerical models and ice core microstructure analysis

Science.gov (United States)

Steinbach, Florian; Kuiper, Ernst-Jan N.; Eichler, Jan; Bons, Paul D.; Drury, Martyn R.; Griera, Albert; Pennock, Gill M.; Weikusat, Ilka

2017-09-01

The flow of ice depends on the properties of the aggregate of individual ice crystals, such as grain size or lattice orientation distributions. Therefore, an understanding of the processes controlling ice micro-dynamics is needed to ultimately develop a physically based macroscopic ice flow law. We investigated the relevance of the process of grain dissection as a grain-size-modifying process in natural ice. For that purpose, we performed numerical multi-process microstructure modelling and analysed microstructure and crystallographic orientation maps from natural deep ice-core samples from the North Greenland Eemian Ice Drilling (NEEM) project. Full crystallographic orientations measured by electron backscatter diffraction (EBSD) have been used together with c-axis orientations using an optical technique (Fabric Analyser). Grain dissection is a feature of strain-induced grain boundary migration. During grain dissection, grain boundaries bulge into a neighbouring grain in an area of high dislocation energy and merge with the opposite grain boundary. This splits the high dislocation-energy grain into two parts, effectively decreasing the local grain size. Currently, grain size reduction in ice is thought to be achieved by either the progressive transformation from dislocation walls into new high-angle grain boundaries, called subgrain rotation or polygonisation, or bulging nucleation that is assisted by subgrain rotation. Both our time-resolved numerical modelling and NEEM ice core samples show that grain dissection is a common mechanism during ice deformation and can provide an efficient process to reduce grain sizes and counter-act dynamic grain-growth in addition to polygonisation or bulging nucleation. Thus, our results show that solely strain-induced boundary migration, in absence of subgrain rotation, can reduce grain sizes in polar ice, in particular if strain energy gradients are high. We describe the microstructural characteristics that can be used to

A Systematic Review of the Factors that Patients Use to Choose their Surgeon.

Science.gov (United States)

Yahanda, Alexander T; Lafaro, Kelly J; Spolverato, Gaya; Pawlik, Timothy M

2016-01-01

Given surgery's inherent risks, a patient should be able to make the most informed decisions possible in selecting surgical treatment. However, there is little information on what factors patients deem important when choosing a surgeon. We performed a systematic review of the literature focused on how patients select surgical care, focusing on identification of factors that influence patient choice as well as important sources of information used by patients. A search of all available literature on factors associated with choice of surgeon/surgical care, as well as sources of information used by patients before undergoing surgery, was conducted using the MEDLINE/PubMed electronic database. Of the 2315 publications identified, 86 studies met inclusion criteria. Overall, patients draw upon a wide range of factors when choosing surgical care. Surgeon reputation and competency stood out as the most valued professional attributes. Patients also often selected surgeons based on their interpersonal skills. Many patients chose surgical care using hospital, rather than surgeon, characteristics. For these patients, hospital reputation and hospital distance were factors of primary importance. Importantly, most patients relied on word-of-mouth and physician referrals when choosing a surgeon. Patients also expressed interest in quality information on surgeons, indicating that these data would be useful in decision-making. Patients draw upon a myriad of factors when choosing a surgeon and the circumstances surrounding patients' decisions maybe differ based on sociodemographic, cultural, as well as other factors. Additional information on how patients choose surgeons or hospitals will help providers assist patients in finding their preferred caregivers.

Choosing the right health care provider for pregnancy and childbirth

Science.gov (United States)

... page: //medlineplus.gov/ency/patientinstructions/000596.htm Choosing the right health care provider for pregnancy and childbirth To use the sharing features on this page, please enable JavaScript. ...

Bioactive compounds in whole grain wheat

NARCIS (Netherlands)

Mateo Anson, N.

2010-01-01

Bread can be healthier! Consuming whole-grain foods can prevent cardiovascular diseases, type-2 diabetes and metabolic syndrome. This is due to bioactive compounds in whole grain, such as antioxidants and anti-inflammatory compounds. We found that the different fractions of a wheat grain vary much

Grain processes in massive star formation

International Nuclear Information System (INIS)

Wolfire, M.G.; Cassinelli, J.P.

1986-01-01

Observational evidence suggests that stars greater than 100 M(solar) exist in the Galaxy and Large Magellanic Cloud (LMC), however classical star formation theory predicts stellar mass limits of only approx. 60 M(solar). A protostellar accretion flow consists of inflowing gas and dust. Grains are destroyed as they are near the central protostar creating a dust shell or cocoon. Radiation pressure acting on the grain can halt the inflow of material thereby limiting the amount of mass accumulated by the protostar. We first consider rather general constraints on the initial grain to gas ratio and mass accretion rates that permit inflow. We further constrain these results by constructing a numerical model. Radiative deceleration of grains and grain destruction processes are explicitly accounted for in an iterative solution of the radiation-hydrodynamic equations. Findings seem to suggest that star formation by spherical accretion requires rather extreme preconditioning of the grain and gas environment

WIDE AND THICK GRAIN 1, which encodes an otubain-like protease with deubiquitination activity, influences grain size and shape in rice.

Science.gov (United States)

Huang, Ke; Wang, Dekai; Duan, Penggen; Zhang, Baolan; Xu, Ran; Li, Na; Li, Yunhai

2017-09-01

Grain size and shape are two crucial traits that influence grain yield and grain appearance in rice. Although several factors that affect grain size have been described in rice, the molecular mechanisms underlying the determination of grain size and shape are still elusive. In this study we report that WIDE AND THICK GRAIN 1 (WTG1) functions as an important factor determining grain size and shape in rice. The wtg1-1 mutant exhibits wide, thick, short and heavy grains and also shows an increased number of grains per panicle. WTG1 determines grain size and shape mainly by influencing cell expansion. WTG1 encodes an otubain-like protease, which shares similarity with human OTUB1. Biochemical analyses indicate that WTG1 is a functional deubiquitinating enzyme, and the mutant protein (wtg1-1) loses this deubiquitinating activity. WTG1 is expressed in developing grains and panicles, and the GFP-WTG1 fusion protein is present in the nucleus and cytoplasm. Overexpression of WTG1 results in narrow, thin, long grains due to narrow and long cells, further supporting the role of WTG1 in determining grain size and shape. Thus, our findings identify the otubain-like protease WTG1 to be an important factor that determines grain size and shape, suggesting that WTG1 has the potential to improve grain size and shape in rice. © 2017 The Authors The Plant Journal © 2017 John Wiley & Sons Ltd.

Sustainable production of grain crops for biofuels

Science.gov (United States)

Grain crops of the Gramineae are grown for their edible, starchy seeds. Their grain is used directly for human food, livestock feed, and as raw material for many industries, including biofuels. Using grain crops for non-food uses affects the amount of food available to the world. Grain-based biofuel...

Effects of grain-producing cover crops on rice grain yield in Cabo Delgado, Mozambique

Directory of Open Access Journals (Sweden)

Adriano Stephan Nascente

Full Text Available ABSTRACT Besides providing benefits to the environment such as soil protection, release of nutrients, soil moisture maintenance, and weed control, cover crops can increase food production for grain production. The aim of this study was to evaluate the production of biomass and grain cover crops (and its respective effects on soil chemical and physical attributes, yield components, and grain yield of rice in Mozambique. The study was conducted in two sites located in the province of Cabo Delgado, in Mozambique. The experimental design was a randomized block in a 2 × 6 factorial, with four repetitions. Treatments were carried out in two locations (Cuaia and Nambaua with six cover crops: Millet (Pennisetum glaucum L.; namarra bean (Lablab purpureus (L. Sweet, velvet beans (Mucuna pruriens L., oloco beans (Vigna radiata (L. R. Wilczek, cowpea (Vigna unguiculata L., and fallow. Cover crops provided similar changes in chemical and physical properties of the soil. Lablab purpureus, Vigna unguiculata, and Mucuna pruriens produced the highest dry matter biomass. Vigna unguiculada produced the highest amount of grains. Rice grain yields were similar under all cover crops and higher in Cuaia than Nambaua.

The influence of grain size, grain color, and suspended-sediment concentration on light attenuation: why fine-grained terrestrial sediment is bad for coral reef ecosystems

Science.gov (United States)

Storlazzi, Curt; Norris, Benjamin; Rosenberger, Kurt

2015-01-01

Sediment has been shown to be a major stressor to coral reefs globally. Although many researchers have tested the impact of sedimentation on coral reef ecosystems in both the laboratory and the field and some have measured the impact of suspended sediment on the photosynthetic response of corals, there has yet to be a detailed investigation on how properties of the sediment itself can affect light availability for photosynthesis. We show that finer-grained and darker-colored sediment at higher suspended-sediment concentrations attenuates photosynthetically active radiation (PAR) significantly more than coarser, lighter-colored sediment at lower concentrations and provide PAR attenuation coefficients for various grain sizes, colors, and suspended-sediment concentrations that are needed for biophysical modeling. Because finer-grained sediment particles settle more slowly and are more susceptible to resuspension, they remain in the water column longer, thus causing greater net impact by reducing light essential for photosynthesis over a greater duration. This indicates that coral reef monitoring studies investigating sediment impacts should concentrate on measuring fine-grained lateritic and volcanic soils, as opposed to coarser-grained siliceous and carbonate sediment. Similarly, coastal restoration efforts and engineering solutions addressing long-term coral reef ecosystem health should focus on preferentially retaining those fine-grained soils rather than coarse silt and sand particles.

The influence of education level on choosing coastal regions as tourist destinations

Directory of Open Access Journals (Sweden)

Đeri Lukrecija

2017-01-01

Full Text Available The main aim of the paper is to investigate the influence of formal education level on decision-making process when choosing a tourist destination based on multivariate analysis of variance (MANOVA. The survey was conducted on the sample of 252 respondents from Bačka region (Vojvodina/Serbia. Also, this study strives to examine the influence of education level on decision-making process including all five phases of decision-making process: need awareness, information search, alternatives estimation, purchase and purchase evaluation, applied to the process of choosing coastal regions as tourist destinations. The study shows that education level is related to four out of five phases of decision-making process (only in case of need awareness there is no statistically significant difference. This is especially important for creation of a marketing platform with promotional activities adjusted to different market segments differentiated by education level. Moreover, the study discusses differences in behaviour of different educational groups while choosing travel destinations.

Whole grain gluten-free egg-free pasta

Science.gov (United States)

The USDA food guide recommends that at least ½ of all the grains eaten should be whole grains. The FDA allows food Health Claim labels for food containing 51% whole grains and 11 g of dietary fiber. This is the only report demonstrating innovative whole grain gluten free, egg free (no chemicals adde...

Influence of grain structure on the deformation mechanism in martensitic shear reversion-induced Fe-16Cr-10Ni model austenitic alloy with low interstitial content: Coarse-grained versus nano-grained/ultrafine-grained structure

Energy Technology Data Exchange (ETDEWEB)

Challa, V.S.A. [Laboratory for Excellence in Advanced Steel Research, Department of Metallurgical, Materials Engineering, and Biomedical Engineering, University of Texas at El Paso, El Paso, TX 79968 (United States); Misra, R.D.K., E-mail: dmisra2@utep.edu [Laboratory for Excellence in Advanced Steel Research, Department of Metallurgical, Materials Engineering, and Biomedical Engineering, University of Texas at El Paso, El Paso, TX 79968 (United States); Somani, M.C. [Center for Advanced Steels Research, The University of Oulu, P.O. Box 4200, 90014 Oulu (Finland); Wang, Z.D. [State Key Laboratory for Rolling and Automation, Northeastern University, 3-11 Wenhua Road, Shenyang 110819 (China)

2016-04-20

Nanograined/ultrafine-grained (NG/UFG) materials characterized by high strength-high ductility combination are excellent vehicles to obtain an unambiguous understanding of deformation mechanisms vis-à-vis their coarse-grained counterparts. In this context, the innovative concept of phase reversion-induced NG/UFG structure enabled achieving high strength besides comparable ductility, for instance, in metastable austenitic stainless steels. In the phase reversion process, severe deformation of austenite at room temperature (typically ~60–80%) transforms face-centered cubic austenite (γ) to body centered cubic martensite (α′). Upon annealing, martensite reverts to austenite leading to extensive grain refinement. The objective of the present study to fundamentally understand the deformation mechanisms in NG/UFG structure in relation to that of the coarse-grained (CG) structure was accomplished by combining depth-sensing nanoscale experiments on an Fe-16Cr-10Ni model austenitic alloy conducted at different strain rates, followed by the study of structural evolution in the deformed zone using transmission electron microscopy (TEM). In the high strength NG/UFG steel (YS~585 MPa), stacking faults and nanotwins contributed to the enhanced ductility (El~35%), while in the case of low strength (YS~260 MPa) coarse-grained (CG) counterpart, ductility was also high (El~40%), but chiefly due to strain-induced martensite, which points to a clear case of grain size effect (and the corresponding level of strength). The distinct change in the deformation mechanism from stacking faults and twinning-induced plasticity (TWIP) in the NG structure to transformation-induced plasticity (TRIP) in the CG structure is elucidated in terms of austenite stability-strain energy relationship. The insights on the relationship between grain structure (and strength) and deformation mechanisms are envisaged to be important in providing a new direction for the futuristic design of high strength

Deformation inhomogeneity in large-grained AA5754 sheets

International Nuclear Information System (INIS)

Zhu Guozhen; Hu Xiaohua; Kang Jidong; Mishra, Raja K.; Wilkinson, David S.

2011-01-01

Research highlights: → Microstructure and strain relationship at individual grain level was studied. → 'Hot spots' nucleate early and most keep growing throughout deformation stages. → 'Hot spots' are correlated with 'soft' grains and soft-evolution grains. → Grains with high Schmid factors tend to be 'soft' grains. → Grains with the direction close to tensile axis tend to become softer. - Abstract: Models for deformation and strain localization in polycrystals that incorporate microstructural features including particles are computationally intensive due to the large variation in scale in going from particles to grains to a specimen. As a result such models are generally 2-D in nature. This is an issue for experimental validation. We have therefore studied deformation heterogeneities and strain localization behavior of coarse-grained alloys with only two grains across the sample thickness, therefore mimicking 2-D behavior. Aluminum alloy sheets (AA5754) have been investigated by a number of surface techniques, including digital image correlation, slip trace analysis and electron backscattered diffraction, at the individual grain level. Local strain concentration zones appear from the very beginning of deformation, which then maintain sustained growth and lead, in one of these regions, to localization and final fracture. These 'hot spots' occur in areas with locally soft grains (i.e. grains with or close to the tensile direction) and soft-evolution orientations (i.e. grains with close to the tensile direction). These grains can be correlated with Taylor and/or Schmid factors.

Tracing magnetic fields with aligned grains

International Nuclear Information System (INIS)

Lazarian, A.

2007-01-01

Magnetic fields play a crucial role in various astrophysical processes, including star formation, accretion of matter, transport processes (e.g., transport of heat), and cosmic rays. One of the easiest ways to determine the magnetic field direction is via polarization of radiation resulting from extinction or/and emission by aligned dust grains. Reliability of interpretation of the polarization maps in terms of magnetic fields depends on how well we understand the grain-alignment theory. Explaining what makes grains aligned has been one of the big issues of the modern astronomy. Numerous exciting physical effects have been discovered in the course of research undertaken in this field. As both the theory and observations matured, it became clear that the grain-alignment phenomenon is inherent not only in diffuse interstellar medium or molecular clouds but also is a generic property of the dust in circumstellar regions, interplanetary space and cometary comae. Currently the grain-alignment theory is a predictive one, and its results nicely match observations. Among its predictions is a subtle phenomenon of radiative torques. This phenomenon, after having stayed in oblivion for many years after its discovery, is currently viewed as the most powerful means of alignment. In this article, I shall review the basic physical processes involved in grain alignment, and the currently known mechanisms of alignment. I shall also discuss possible niches for different alignment mechanisms. I shall dwell on the importance of the concept of grain helicity for understanding of many properties of grain alignment, and shall demonstrate that rather arbitrarily shaped grains exhibit helicity when they interact with gaseous and radiative flows

Choosing the negative: A behavioral demonstration of morbid curiosity

NARCIS (Netherlands)

Oosterwijk, S.

2017-01-01

This paper examined, with a behavioral paradigm, to what extent people choose to view stimuli that portray death, violence or harm. Based on briefly presented visual cues, participants made choices between highly arousing, negative images and positive or negative alternatives. The negative images

Grain-size distributions and grain boundaries of chalcopyrite-type thin films

International Nuclear Information System (INIS)

Abou-Ras, D.; Schorr, S.; Schock, H.W.

2007-01-01

CuInSe 2 , CuGaSe 2 , Cu(In,Ga)Se 2 and CuInS 2 thin-film solar absorbers in completed solar cells were studied in cross section by means of electronbackscatter diffraction. From the data acquired, grain-size distributions were extracted, and also the most frequent grain boundaries were determined. The grain-size distributions of all chalcopyrite-type thin films studied can be described well by lognormal distribution functions. The most frequent grainboundary types in these thin films are 60 - left angle 221 right angle tet and 71 - left angle 110 right angle tet (near) Σ3 twin boundaries. These results can be related directly to the importance of {112} tet planes during the topotactical growth of chalcopyrite-type thin films. Based on energetic considerations, it is assumed that the most frequent twin boundaries exhibit a 180 - left angle 221 right angle tet constellation. (orig.)

Grain Unloading of Arsenic Species in Rice

Energy Technology Data Exchange (ETDEWEB)

Carey, Anne-Marie; Scheckel, Kirk G.; Lombi, Enzo; Newville, Matt; Choi, Yongseong; Norton, Gareth J.; Charnock, John M.; Feldmann, Joerg; Price, Adam H.; Meharg, Andrew A. (EPA); (U. South Australia); (Manchester); (Aberdeen); (UC)

2010-01-11

Rice (Oryza sativa) is the staple food for over half the world's population yet may represent a significant dietary source of inorganic arsenic (As), a nonthreshold, class 1 human carcinogen. Rice grain As is dominated by the inorganic species, and the organic species dimethylarsinic acid (DMA). To investigate how As species are unloaded into grain rice, panicles were excised during grain filling and hydroponically pulsed with arsenite, arsenate, glutathione-complexed As, or DMA. Total As concentrations in flag leaf, grain, and husk, were quantified by inductively coupled plasma mass spectroscopy and As speciation in the fresh grain was determined by x-ray absorption near-edge spectroscopy. The roles of phloem and xylem transport were investigated by applying a {+-} stem-girdling treatment to a second set of panicles, limiting phloem transport to the grain in panicles pulsed with arsenite or DMA. The results demonstrate that DMA is translocated to the rice grain with over an order magnitude greater efficiency than inorganic species and is more mobile than arsenite in both the phloem and the xylem. Phloem transport accounted for 90% of arsenite, and 55% of DMA, transport to the grain. Synchrotron x-ray fluorescence mapping and fluorescence microtomography revealed marked differences in the pattern of As unloading into the grain between DMA and arsenite-challenged grain. Arsenite was retained in the ovular vascular trace and DMA dispersed throughout the external grain parts and into the endosperm. This study also demonstrates that DMA speciation is altered in planta, potentially through complexation with thiols.

Grain boundary corrosion of copper canister material

International Nuclear Information System (INIS)

Fennell, P.A.H.; Graham, A.J.; Smart, N.R.; Sofield, C.J.

2001-03-01

The proposed design for a final repository for spent fuel and other long-lived residues in Sweden is based on the multi-barrier principle. The waste will be encapsulated in sealed cylindrical canisters, which will then be placed in granite bedrock and surrounded by compacted bentonite clay. The canister design is based on a thick cast inner container fitted inside a corrosion-resistant copper canister. During fabrication of the outer copper canisters there will be some unavoidable grain growth in the welded areas. As grains grow they will tend to concentrate impurities within the copper at the new grain boundaries. The work described in this report was undertaken to determine whether there is any possibility of enhanced corrosion at grain boundaries within the copper canister. The potential for grain boundary corrosion was investigated by exposing copper specimens, which had undergone different heat treatments and hence had different grain sizes, to aerated artificial bentonite-equilibrated groundwater with two concentrations of chloride, for increasing periods of time. The degree of grain boundary corrosion was determined by atomic force microscopy (AFM) and optical microscopy. AFM showed no increase in grain boundary 'ditching' for low chloride groundwater. In high chloride groundwater the surface was covered uniformly with a fine-grained oxide. No increases in oxide thickness were observed. No significant grain boundary attack was observed using optical microscopy either. The work suggests that in aerated artificial groundwaters containing chloride ions, grain boundary corrosion of copper is unlikely to adversely affect SKB's copper canisters

Choosing the Right Assessment for the Right Purpose

Science.gov (United States)

Eliasson, Ann-Christin

2012-01-01

Assessments used for both clinical practice and research should show evidence of validity and reliability for the target group of people. It is easy to agree with this statement, but it is not always easy to choose the right assessment for the right purpose. Recently there have been increasing numbers of studies which investigate further the…

Choosing the Best Enzyme Complex Structure Made Easy.

Science.gov (United States)

Das, Sayoni; Orengo, Christine

2018-04-03

In this issue of Structure, Tyzack et al. (2018) present a study of enzyme-ligand complexes in the PDB and show that the molecular similarity of bound and cognate ligands can be used to choose the most biologically appropriate complex structure for analysis when multiple structures are available. Copyright © 2018 Elsevier Ltd. All rights reserved.

The Dilemma of Individual Autonomy versus Choosing Rightly

Science.gov (United States)

Yehezkely, Chen

2015-01-01

Many important goals or values of education are tokens of either one of these two meta-goals-values: raising our children to be autonomous, or raising them to choose rightly. Thus, the conflicts between many educational goals-values are tokens of the meta-conflict between these two, and the questions of priority that such conflicts invite are…

Choosing health, constrained choices.

Science.gov (United States)

Chee Khoon Chan

2009-12-01

In parallel with the neo-liberal retrenchment of the welfarist state, an increasing emphasis on the responsibility of individuals in managing their own affairs and their well-being has been evident. In the health arena for instance, this was a major theme permeating the UK government's White Paper Choosing Health: Making Healthy Choices Easier (2004), which appealed to an ethos of autonomy and self-actualization through activity and consumption which merited esteem. As a counterpoint to this growing trend of informed responsibilization, constrained choices (constrained agency) provides a useful framework for a judicious balance and sense of proportion between an individual behavioural focus and a focus on societal, systemic, and structural determinants of health and well-being. Constrained choices is also a conceptual bridge between responsibilization and population health which could be further developed within an integrative biosocial perspective one might refer to as the social ecology of health and disease.

BIOPSYCHOSOCIAL DETERMINANTS OF HYPOACTIVE SEXUAL DESIRE IN WOMEN: A NARRATIVE REVIEW

Science.gov (United States)

Malary, Mina; Khani, Soghra; Pourasghar, Mehdi; Moosazadeh, Mahmood; Hamzehgardeshi, Zeinab

2015-01-01

Background: As a mental response to sexual stimuli, sexual desire determines human sexual behavior and represents the cognitive capacity of sexual stimulation, so that avoiding sexual activity has a very negative effect on the discharge of intimacy and joy in couple’s relationship and threatens the stability relationship, which can finally end in sexual dissatisfaction and divorce; it may even affect the reproduction. This study, reviews the literature on biopsychosocial determinants of hypoactive sexual desire disorder in women in childbearing ages. Method: The search was done from January to March 2015 by the use of the data bases ProQuest, Pubmed, CINAHL, Ovid and Medline and the words sexual desire, related factors and biopsychosocial determinants were used as free text words. The words reduce sexual desire, hypoactive sexual desire disorder, dyadic relationship, biopsychosocial factors and women were used as keywords in the search. Also, the articles focusing on any aspects of sexual desire such as biological, social and psychological factors and relationship factors alone or integrated, were included in the study. The articles which specifically targeted the hypoactive sexual desire disorder in pregnant and lactating women and also the articles targeting biopsychosocial factors related to other types of sexual function disorder such as arousal disorder, orgasm disorder and dyspareunia, were all excluded from this study. Findings: After reviewing the literature, the findings were categorized in three main class of effect of biologic factors on sexual desire and sexual hypoactivity, the effect of psychological factors on sexual desire and the effect of cultural factors and couple’s relationship on sexual desire, each of these domains cover a wide range (such as hormonal changes, chronic diseases, psychological difficulties (perceived stress, anxiety, depression). Incompatibility of couples, the spouse’s sexual function disorder) which may overlap. Because

Patient Perceptions of Breast Cancer Risk in Imaging-Detected Low-Risk Scenarios and Thresholds for Desired Intervention: A Multi-Institution Survey.

Science.gov (United States)

Grimm, Lars J; Shelby, Rebecca A; Knippa, Emily E; Langman, Eun L; Miller, Lauren S; Whiteside, Beth E; Soo, Mary Scott C

2018-06-01

To determine women's perceptions of breast cancer risk and thresholds for desiring biopsy when considering BI-RADS 3 and 4A scenarios and recommendations, respectively. Women presenting for screening mammography from five geographically diverse medical centers were surveyed. Demographic information and baseline anxiety were queried. Participants were presented with scenarios of short-term imaging follow-up recommendations (ie, BI-RADS 3) and biopsy recommendations (ie, BI-RADS 4A) for low-risk mammographic abnormalities and asked to estimate their breast cancer risk for each scenario. Participants reported the threshold (ie, likelihood of cancer) where they would feel comfortable undergoing short-term imaging follow-up and biopsy and their anticipated regret for choosing short-term follow-up versus biopsy. Analysis of 2,747 surveys showed that participants estimated breast cancer risk of 32.8% for a BI-RADS 3 and 41.1% for a BI-RADS 4A scenarios are significantly greater rates than clinically established rates (<2% [P < .001] and 2%-10% [P < .001], respectively). Over one-half (55.4%) of participants reported they would never want imaging follow-up if there was any chance of cancer; two-thirds (66.2%) reported they would desire biopsy if there was any chance of cancer. Participants reported greater anticipated regret (P < .001) and less relief and confidence (P < .001) with the decision to undergo follow-up imaging versus biopsy. Women overestimate breast cancer risk associated with both BI-RADS 3 and 4A scenarios and desire very low biopsy thresholds. Greater anticipated regret and less relief and confidence was reported with the choice to undergo short-term imaging follow-up compared with biopsy. Copyright © 2018 American College of Radiology. Published by Elsevier Inc. All rights reserved.

A quantitative atom probe study of the Nb excess at prior austenite grain boundaries in a Nb microalloyed strip-cast steel

International Nuclear Information System (INIS)

Felfer, Peter J.; Killmore, Chris R.; Williams, Jim G.; Carpenter, Kristin R.; Ringer, Simon P.; Cairney, Julie M.

2012-01-01

Most modern HSLA steels rely on the effect of Nb in steels to achieve the properties desired for a specific application. While the role of Nb in forming precipitates has been well characterized, its role in a solid solution is less well understood due to the difficulty of obtaining quantitative experimental data. In the current work, site-specific atom probe tomography was used to quantify the amount of Nb present at prior austenite grain boundaries in a commercial strip-cast steel, produced via the Castrip ® process. This was compared to the amount of Nb found at ferrite–ferrite grain boundaries that had formed during the transformation from austenite to ferrite. With the interfacial excess Nb measured, thermodynamic calculations were carried out and compared to the change in transformation temperature obtained by dilatometry, with reference to a comparable Nb free, strip-cast steel.

7 CFR 810.801 - Definition of mixed grain.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Definition of mixed grain. 810.801 Section 810.801 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD... GRAIN United States Standards for Mixed Grain Terms Defined § 810.801 Definition of mixed grain. Any...

Social desirability in personality inventories: symptoms, diagnosis and prescribed cure.

Science.gov (United States)

Bäckström, Martin; Björklund, Fredrik

2013-04-01

An analysis of social desirability in personality assessment is presented. Starting with the symptoms, Study 1 showed that mean ratings of graded personality items are moderately to strongly linearly related to social desirability (Self Deception, Impression formation, and the first Principal Component), suggesting that item popularity may be a useful heuristic tool for identifying items which elicit socially desirable responding. We diagnose the cause of socially desirable responding as an interaction between the evaluative content of the item and enhancement motivation in the rater. Study 2 introduced a possible cure; evaluative neutralization of items. To test the feasibility of the method lay psychometricians (undergraduates) reformulated existing personality test items according to written instructions. The new items were indeed lower in social desirability while essentially retaining the five factor structure and reliability of the inventory. We conclude that although neutralization is no miracle cure, it is simple and has beneficial effects. © 2012 The Authors. Scandinavian Journal of Psychology © 2012 The Scandinavian Psychological Associations.

Hypersexuality and high sexual desire: exploring the structure of problematic sexuality.

Science.gov (United States)

Carvalho, Joana; Štulhofer, Aleksandar; Vieira, Armando L; Jurin, Tanja

2015-06-01

The concept of hypersexuality has been accompanied by fierce debates and conflicting conclusions about its nature. One of the central questions under the discussion is a potential overlap between hypersexuality and high sexual desire. With the relevant research in its early phase, the structure of hypersexuality remains largely unknown. The aim of the present study was to systematically explore the overlap between problematic sexuality and high sexual desire. A community online survey was carried out in Croatia in 2014. The data were first cluster analyzed (by gender) based on sexual desire, sexual activity, perceived lack of control over one's sexuality, and negative behavioral consequences. Participants in the meaningful clusters were then compared for psychosocial characteristics. To complement cluster analysis (CA), multigroup confirmatory factor analysis (CFA) of the same four constructs was carried out. Indicators representing the proposed structure of hypersexuality were included: sexual desire, frequency of sexual activity, lack of control over one's sexuality, and negative behavioral outcomes. Psychosocial characteristics such as religiosity, attitudes toward pornography, and general psychopathology were also evaluated. CA pointed to the existence of two meaningful clusters, one representing problematic sexuality, that is, lack of control over one's sexuality and negative outcomes (control/consequences cluster), and the other reflecting high sexual desire and frequent sexual activity (desire/activity cluster). Compared with the desire/activity cluster, individuals from the control/consequences cluster reported more psychopathology and were characterized by more traditional attitudes. Complementing the CA findings, CFA pointed to two distinct latent dimensions-problematic sexuality and high sexual desire/activity. Our study supports the distinctiveness of hypersexuality and high sexual desire/activity, suggesting that problematic sexuality might be more

Sexual desire changes during menstrual cycle and relationship with premenstrual syndrome

Directory of Open Access Journals (Sweden)

Kiani Asiabar A.

2007-09-01

Full Text Available Background: Sexual function in women may be affected by their menstrual cycle. Lack of sexual drive is a deficiency or absence of sexual fantasies and desire for sexual activity. This study aims at determining the changes in sexual desire during the menstrual cycle and those associated with premenstrual syndrome (PMS and evaluates sexual desire during the menstrual cycle and the associated changes with PMS. Methods: The sample for this cross-sectional study includes 150 women employed in factories in Tehran. The instruments for data collection were questionnaires and journals of premenstrual experiences.Results: Analysis of the data showed that the mean age of the subjects was 31 years standard deviation = 8.46(. The most frequent decrease in sexual desire was during the week prior to the start of menstrual bleeding (27.3% and the least frequent was from the end of bleeding to one week before the next period of menstrual bleeding (5.3%. In 24.7% of the cases, an increase in sexual desire occurred during the middle of the menstrual cycle and 27.3% during the course of menstrual bleeding. Moreover, 10.7% of the subjects had an increase in sexual desire during the week before bleeding. Furthermore, a positive correlation was found between changes in sexual desire and PMS (p<0.001. In addition, a positive correlation was found between changes in sexual desire and breast tenderness, joint and muscle pain. Conclusions: The sexual desire of women, with or without PMS, changes during the menstrual cycle. The greatest decrease in sexual desire occurs during the first week before menstrual bleeding in women with PMS. Such information can greatly help toward understanding and treatment in sexual therapy for couples.

Nanoscale abnormal grain growth in (001) epitaxial ceria

International Nuclear Information System (INIS)

Solovyov, Vyacheslav F.; Develos-Bagarinao, Katherine; Nykypanchuk, Dmytro

2009-01-01

X-ray reciprocal-space mapping and atomic force microscopy (AFM) are used to study kinetics and mechanisms of lateral grain growth in epitaxial (001) ceria (CeO 2 ) deposited by pulsed laser deposition on (001) yttria-stabilized zirconia (YSZ) and (12 lowbar 10) (r-cut) sapphire. Rate and character of the grain growth during postannealing at 1050 deg. C are found to be strongly dependent on the type of the epitaxial substrate. Films deposited on YSZ exhibit signatures of normal grain growth, which stagnated after the lateral grain size reaches 40 nm, consistent with the grain-boundary pinning by the thermal grooving. In contrast, when r-cut sapphire substrate was used, abnormal (secondary) grain growth is observed. A small population of grains grow to well over 100 nm consuming smaller, 100 nm large (001) terminations and rendering the sample single-crystalline quality. The grain growth is accompanied by reduction in lateral rms strain, resulting in a universal grain size--rms strain dependence. Analysis of the AFM and x-ray diffraction data leads to the conclusion that bimodal initial grain population consisting of grains with very different sizes is responsible for initiation of the abnormal growth in (001) CeO 2 films on r-cut sapphire. Due to different surface chemistry, when a YSZ substrate is used, the initial grain distribution is monomodal, therefore only normal growth is active. We demonstrate that a 2.2 deg. miscut of the sapphire substrate eliminates the large-grain population, thus suppressing abnormal grain growth. It is concluded that utilization of abnormal grain growth is a promising way for synthesis of large (001) ceria terminations.

Physical properties of five grain dust types.

Science.gov (United States)

Parnell, C B; Jones, D D; Rutherford, R D; Goforth, K J

1986-01-01

Physical properties of grain dust derived from five grain types (soybean, rice, corn, wheat, and sorghum) were measured and reported. The grain dusts were obtained from dust collection systems of terminal grain handling facilities and were assumed to be representative of grain dust generated during the handling process. The physical properties reported were as follows: particle size distributions and surface area measurements using a Coulter Counter Model TAII; percent dust fractions less than 100 micron of whole dust; bulk density; particle density; and ash content. PMID:3709482

Socially desirable responding by bariatric surgery candidates during psychological assessment.

Science.gov (United States)

Ambwani, Suman; Boeka, Abbe G; Brown, Joshua D; Byrne, T Karl; Budak, Amanda R; Sarwer, David B; Fabricatore, Anthony N; Morey, Leslie C; O'Neil, Patrick M

2013-01-01

Most bariatric surgery programs in the United States require preoperative psychological evaluations for candidates for surgery. Among those who perform these evaluations is concern that many patients engage in "impression management" or minimizing the symptoms of distress to receive a recommendation to proceed with surgery from the mental health professional. We sought to assess the prevalence of socially desirable responding and its associations with measures of psychological functioning among bariatric surgery candidates at 2 academic medical centers in the United States. The participants were male (n = 66) and female (n = 293) bariatric surgery candidates who presented for psychological evaluation. The participants completed 2 measures of socially desirable response styles (Marlowe-Crowne Social Desirability Scale and Personality Assessment Inventory Positive Impression Management scale) and standardized measures of anxiety, depression, and alcohol-related problems. The participants exhibited elevated scores on the social desirability indicators, with 33.3-39.8% scoring above the recommended cut-score on the Personality Assessment Inventory Positive Impression Management scale and 62.3-67% scoring 1 standard deviation above the standardization mean on the Marlowe-Crowne Social Desirability Scale. Scores on the Marlowe-Crowne Social Desirability Scale and Personality Assessment Inventory Positive Impression Management scale correlated inversely with the clinical measures of anxiety and depression, and the high/low scorers on the social desirability indices exhibited significant differences in anxiety and depression. Thus, elevated scores on the social desirability indices were associated with underreporting of certain clinical symptoms. A substantial proportion of bariatric surgery candidates appear to present themselves in an overly favorable light during the psychological evaluation. This response style is associated with less reporting of psychological

Observation of changing crystal orientations during grain coarsening

International Nuclear Information System (INIS)

Sharma, Hemant; Huizenga, Richard M.; Bytchkov, Aleksei; Sietsma, Jilt; Offerman, S. Erik

2012-01-01

Understanding the underlying mechanisms of grain coarsening is important in controlling the properties of metals, which strongly depend on the microstructure that forms during the production process or during use at high temperature. Grain coarsening of austenite at 1273 K in a binary Fe–2 wt.% Mn alloy was studied using synchrotron radiation. Evolution of the volume, average crystallographic orientation and mosaicity of more than 2000 individual austenite grains was tracked during annealing. It was found that an approximately linear relationship exists between grain size and mosaicity, which means that orientation gradients are present in the grains. The orientation gradients remain constant during coarsening and consequently the character of grain boundaries changes during coarsening, affecting the coarsening rate. Furthermore, changes in the average orientation of grains during coarsening were observed. The changes could be understood by taking the observed orientation gradients and anisotropic movement of grain boundaries into account. Five basic modes of grain coarsening were deduced from the measurements, which include: anisotropic (I) and isotropic (II) growth (or shrinkage); movement of grain boundaries resulting in no change in volume but a change in shape (III); movement of grain boundaries resulting in no change in volume and mosaicity, but a change in crystallographic orientation (IV); no movement of grain boundaries (V).

International migration desires related to subjective well-being

OpenAIRE

Cai, Ruohong; Esipova, Neli; Oppenheimer, Michael; Feng, Shuaizhang

2014-01-01

Previous research on the determinants of international migration has largely focused on objective factors, such as income. We instead use subjective well-being (SWB) to explain international migration desires, an expressed willingness to migrate. We find that individuals with higher SWB have lower international migration desires. At the individual level, the SWB-migration relationship appears to be more robust than the income-migration relationship. At the country level, national average SWB ...

Choosing Wisely Imaging Recommendations: Initial Implementation in New England Emergency Departments

Directory of Open Access Journals (Sweden)

Ali S. Raja

2017-04-01

Full Text Available Introduction: In June 2016, the American College of Emergency Physicians (ACEP Emergency Quality Network began its Reduce Avoidable Imaging Initiative, designed to “reduce testing and imaging with low risk patients through the implementation of Choosing Wisely recommendations.” However, it is unknown whether New England emergency departments (ED have already implemented evidence-based interventions to improve adherence to ACEP Choosing Wisely recommendations related to imaging after their initial release in 2013. Our objective was to determine this, as well as whether provider-specific audit and feedback for imaging had been implemented in these EDs. Methods: This survey study was exempt from institutional review board review. In 2015, we mailed surveys to 195 hospital-affiliated EDs in all six New England states to determine whether they had implemented Choosing Wisely-focused interventions in 2014. Initial mailings included cover letters denoting the endorsement of each state’s ACEP chapter, and we followed up twice with repeat mailings to nonresponders. Data analysis included descriptive statistics and a comparison of state differences using Fisher’s exact test. Results: A total of 169/195 (87% of New England EDs responded, with all individual state response rates >80%. Overall, 101 (60% of responding EDs had implemented an intervention for at least one Choosing Wisely imaging scenario; 57% reported implementing a specific guideline/policy/clinical pathway and 28% reported implementing a computerized decision support system. The most common interventions were for chest computed tomography (CT in patients at low risk of pulmonary embolism (47% of EDs and head CT in patients with minor trauma (45% of EDs. In addition, 40% of EDs had implemented provider-specific audit and feedback, without significant interstate variation (range: 29-55%. Conclusion: One year after release of the ACEP Choosing Wisely recommendations, most New England EDs

Grain interaction mechanisms leading to intragranular orientation spread in tensile deformed bulk grains of interstitial-free steel

DEFF Research Database (Denmark)

Winther, Grethe; Wright, Jonathan P.; Schmidt, Søren

2017-01-01

environments representing the bulk texture, yet their deformation-induced rotations are very different. The ALAMEL model is employed to analyse the grain interaction mechanisms. Predictions of this model qualitatively agree with the directionality and magnitude of the experimental orientation spread. However......, quantitative agreement requires fine-tuning of the boundary conditions. The majority of the modelled slip is accounted for by four slip systems also predicted to be active by the classical Taylor model in uniaxial tension, and most of the orientation spread along the grain boundaries is caused by relative...... variations in the activities of these. Although limited to two grains, the findings prove that shear at the grain boundaries as accounted for by the ALAMEL model is a dominant grain interaction mechanism....

The Balanced Inventory of Desirable Responding Short Form (BIDR-16

Directory of Open Access Journals (Sweden)

Claire M. Hart

2015-12-01

Full Text Available Self-report studies often call for assessment of socially desirable responding. Many researchers use the Marlowe–Crowne Scale for its brief versions; however, this scale is outdated, and contemporary models of social desirability emphasize its multi-dimensional nature. The 40-item Balanced Inventory of Desirable Responding (BIDR incorporates Self-Deceptive Enhancement (honest but overly positive responding and Impression Management (bias toward pleasing others. However, its length limits its practicality. This article introduces the BIDR-16. In four studies, we shorten the BIDR from 40 items to 16 items, while retaining its two-factor structure, reliability, and validity. This short form will be invaluable to researchers wanting to assess social desirability when time is limited.

Choosing colors for map display icons using models of visual search.

Science.gov (United States)

Shive, Joshua; Francis, Gregory

2013-04-01

We show how to choose colors for icons on maps to minimize search time using predictions of a model of visual search. The model analyzes digital images of a search target (an icon on a map) and a search display (the map containing the icon) and predicts search time as a function of target-distractor color distinctiveness and target eccentricity. We parameterized the model using data from a visual search task and performed a series of optimization tasks to test the model's ability to choose colors for icons to minimize search time across icons. Map display designs made by this procedure were tested experimentally. In a follow-up experiment, we examined the model's flexibility to assign colors in novel search situations. The model fits human performance, performs well on the optimization tasks, and can choose colors for icons on maps with novel stimuli to minimize search time without requiring additional model parameter fitting. Models of visual search can suggest color choices that produce search time reductions for display icons. Designers should consider constructing visual search models as a low-cost method of evaluating color assignments.

Grain interaction effects in polycrystalline Cu

DEFF Research Database (Denmark)

Thorning, C.; Somers, Marcel A.J.; Wert, John A.

2005-01-01

Crystal orientation maps for a grain in a deformed Cu polycrystal have been analysed with the goal of understanding the effect of grain interactions on orientation subdivision. The polycrystal was incrementally strained in tension to 5, 8, 15 and 25% extension; a crystal orientation map...... was measured after each strain increment. The measurements are represented as rotations from the initial crystal orientation. A coarse domain structure forms in the initial 5% strain increment and persists at higher strains. Crystal rotations for all coarse domains in the grain are consistent with the full...... range of Tailor solutions for axisymmetric strain; grain interactions are not required to account for the coarse domain structure. Special orientation domains extend 20-100 µm into the grain at various locations around its periphery. The special orientation domain morphologies include layers along...

Satisfaction with Appearance and the Desired Treatment to Improve Aesthetics

Directory of Open Access Journals (Sweden)

Bader K. Al-Zarea

2013-01-01

Full Text Available Objective. To identify participants’ satisfaction with appearance and the desired treatment to improve aesthetics. Materials and Methods. 220 participants (127 males and 93 females, mean age = 21.4 ± 1.5 years were recruited into the study. A structured questionnaire was used to assess patients’ satisfaction with appearance and what treatment they desire to improve aesthetics. Participants scored the level of satisfaction with appearance using visual analogue scale. Results. The VAS mean score of satisfaction with general appearance was 6.8 ± 2.3. Half participants were dissatisfied with tooth appearance and 65.9% were dissatisfied with tooth colour. Higher VAS scores were associated with higher desire for all treatments that improve tooth appearance (. Dissatisfaction with tooth appearance increased with increased dissatisfaction with teeth colour, feeling of poor tooth alignment, presence of fractured anterior teeth, and increased desire for orthodontic, crowns, and dentures treatments (. Dissatisfaction with tooth colour was associated with increased desire for tooth whitening and tooth coloured fillings (. Conclusions. Participants had high levels of dissatisfaction with tooth appearance and tooth colour. Dissatisfaction with tooth colour contributed to the increased dissatisfaction with tooth appearance. Dissatisfaction with tooth appearance, colour, alignment, and condition was significantly related to high desire for aesthetic treatments.

Improving detection probabilities for pests in stored grain.

Science.gov (United States)

Elmouttie, David; Kiermeier, Andreas; Hamilton, Grant

2010-12-01

The presence of insects in stored grain is a significant problem for grain farmers, bulk grain handlers and distributors worldwide. Inspection of bulk grain commodities is essential to detect pests and thereby to reduce the risk of their presence in exported goods. It has been well documented that insect pests cluster in response to factors such as microclimatic conditions within bulk grain. Statistical sampling methodologies for grain, however, have typically considered pests and pathogens to be homogeneously distributed throughout grain commodities. In this paper, a sampling methodology is demonstrated that accounts for the heterogeneous distribution of insects in bulk grain. It is shown that failure to account for the heterogeneous distribution of pests may lead to overestimates of the capacity for a sampling programme to detect insects in bulk grain. The results indicate the importance of the proportion of grain that is infested in addition to the density of pests within the infested grain. It is also demonstrated that the probability of detecting pests in bulk grain increases as the number of subsamples increases, even when the total volume or mass of grain sampled remains constant. This study underlines the importance of considering an appropriate biological model when developing sampling methodologies for insect pests. Accounting for a heterogeneous distribution of pests leads to a considerable improvement in the detection of pests over traditional sampling models. Copyright © 2010 Society of Chemical Industry.

Three dimensional grain boundary modeling in polycrystalline plasticity

Science.gov (United States)

Yalçinkaya, Tuncay; Özdemir, Izzet; Fırat, Ali Osman

2018-05-01

At grain scale, polycrystalline materials develop heterogeneous plastic deformation fields, localizations and stress concentrations due to variation of grain orientations, geometries and defects. Development of inter-granular stresses due to misorientation are crucial for a range of grain boundary (GB) related failure mechanisms, such as stress corrosion cracking (SCC) and fatigue cracking. Local crystal plasticity finite element modelling of polycrystalline metals at micron scale results in stress jumps at the grain boundaries. Moreover, the concepts such as the transmission of dislocations between grains and strength of the grain boundaries are not included in the modelling. The higher order strain gradient crystal plasticity modelling approaches offer the possibility of defining grain boundary conditions. However, these conditions are mostly not dependent on misorientation of grains and can define only extreme cases. For a proper definition of grain boundary behavior in plasticity, a model for grain boundary behavior should be incorporated into the plasticity framework. In this context, a particular grain boundary model ([l]) is incorporated into a strain gradient crystal plasticity framework ([2]). In a 3-D setting, both bulk and grain boundary models are implemented as user-defined elements in Abaqus. The strain gradient crystal plasticity model works in the bulk elements and considers displacements and plastic slips as degree of freedoms. Interface elements model the plastic slip behavior, yet they do not possess any kind of mechanical cohesive behavior. The physical aspects of grain boundaries and the performance of the model are addressed through numerical examples.

Desire for Sweet Taste Unchanged After Eating: Evidence of a Dessert Mentality?

Science.gov (United States)

Harington, Kate; Smeele, Rebecca; Van Loon, Fiona; Yuan, Jannie; Haszard, Jillian Joy; Drewer, Amanda; Venn, Bernard Joseph

2016-08-01

Added sugars provide calories and desirability to foods and beverages. Our aim was to test whether desire for a sweet taste would be better maintained than a desire for other tastes for 3 hours after a test meal. Eighty-three young adults ate 2 slices of bread on 2 separate occasions after which they were asked to rate their desire for savory, sweet, fatty, or salty tastes and to specify the number of servings of white rice, pizza, cheese and crackers, sweet biscuits, and pasta they could consume. Desirability was assessed using 100-mm visual analog scales (VAS), with 0 mm representing no desire and 100 mm great desire. When participants provided a quantitative assessment of the servings of foods that they wanted to eat following the bread meal, desire decreased on average for all foods measured, χ 2 (3) = 2.63, p = 0.452. Mean (95% confidence interval [CI]) change in VAS taste desirability 30 minutes after eating declined for salty (14.5 mm [10.5, 18.6]), fatty (11.2 mm [7.1, 15.2]), and savory (24.1 mm [19.7, 28.5]) tastes (p foods and beverages. Targeting familial and cultural practices that discourage the consumption of added sugar foods might be useful to combat desire-driven food intake.

Characterization of vegetative and grain filling periods of winter wheat by stepwise regression procedure. II. Grain filling period

Directory of Open Access Journals (Sweden)

Pržulj Novo

2011-01-01

Full Text Available In wheat, rate and duration of dry matter accumulation and remobilization depend on genotype and growing conditions. The objective of this study was to determine the most appropriate polynomial regression of stepwise regression procedure for describing grain filling period in three winter wheat cultivars. The stepwise regression procedure showed that grain filling is a complex biological process and that it is difficult to offer a simple and appropriate polynomial equation that fits the pattern of changes in dry matter accumulation during the grain filling period, i.e., from anthesis to maximum grain weight, in winter wheat. If grain filling is to be represented with a high power polynomial, quartic and quintic equations showed to be most appropriate. In spite of certain disadvantages, a cubic equation of stepwise regression could be used for describing the pattern of winter wheat grain filling.

Desirable and undesirable future thoughts call for different scene construction processes.

Science.gov (United States)

de Vito, S; Neroni, M A; Gamboz, N; Della Sala, S; Brandimonte, M A

2015-01-01

Despite the growing interest in the ability of foreseeing (episodic future thinking), it is still unclear how healthy people construct possible future scenarios. We suggest that different future thoughts require different processes of scene construction. Thirty-five participants were asked to imagine desirable and less desirable future events. Imagining desirable events increased the ease of scene construction, the frequency of life scripts, the number of internal details, and the clarity of sensorial and spatial temporal information. The initial description of general personal knowledge lasted longer in undesirable than in desirable anticipations. Finally, participants were more prone to explicitly indicate autobiographical memory as the main source of their simulations of undesirable episodes, whereas they equally related the simulations of desirable events to autobiographical events or semantic knowledge. These findings show that desirable and undesirable scenarios call for different mechanisms of scene construction. The present study emphasizes that future thinking cannot be considered as a monolithic entity.

The Pinning by Particles of Low and High Angle Grain Boundaries during Grain Growth

DEFF Research Database (Denmark)

Tweed, C.J.; Ralph, B.; Hansen, Niels

1984-01-01

A study has been made using transmission electron microscopy of the pinning of grain boundaries in aluminium during grain growth by fine dispersions of alumina particles. The boundary parameters have been determined with precision and the pinning effects measured using an approach due to Ashby...

Patterns of workplace supervisor support desired by abused women.

Science.gov (United States)

Perrin, Nancy A; Yragui, Nanette L; Hanson, Ginger C; Glass, Nancy

2011-07-01

The purpose of this study was to understand differences in patterns of supervisor support desired by female victims of intimate partner violence (IPV) and to examine whether the pattern of support desired at work is reflective of a woman's stage of change in the abusive relationship, IPV-related work interference, and IPV-related job reprimands or job loss. We conducted interviews in Spanish or English with adult women working in low-income jobs who had been physically or sexually abused by an intimate partner/ ex-partner in the past year ( N = 133). Cluster analysis revealed three distinct clusters that form a hierarchy of type of support wanted: those who desired limited support; those who desired confidential, time-off, and emotional support; and those who desired support in wide variety of ways from their supervisor. The clusters appeared to reflect stages of behavior change in an abusive relationship. Specifically, the limited-support cluster may represent an early precontemplation stage, with women reporting the least interference with work. The support-in-every-way cluster may represent later stages of change, in which women are breaking away from the abusive partner and report the greatest interference with work. Women in the confidential-, time-off-, and emotional-support cluster are in a transition stage in which they are considering change and are exploring options in their abusive relationship. Understanding the hierarchy of the type of support desired, and its relationship to stages of change in the abusive relationship and work interference, may provide a strong foundation for developing appropriate and effective workplace interventions to guide supervisors in providing support to women experiencing IPV.

SPEED DEPENDENCE OF ACOUSTIC VIBRATION PROPAGATION FROM THE FERRITIC GRAIN SIZE IN LOW-CARBON STEEL

Directory of Open Access Journals (Sweden)

I. A. Vakulenko

2015-08-01

Full Text Available Purpose. It is determining the nature of the ferrite grain size influence of low-carbon alloy steel on the speed propagation of acoustic vibrations. Methodology. The material for the research served a steel sheet of thickness 1.4 mm. Steel type H18T1 had a content of chemical elements within grade composition: 0, 12 % C, 17, 5 % Cr, 1 % Mn, 1, 1 % Ni, 0, 85 % Si, 0, 9 % Ti. The specified steel belongs to the semiferritic class of the accepted classification. The structural state of the metal for the study was obtained by cold plastic deformation by rolling at a reduction in the size range of 20-30 % and subsequent recrystallization annealing at 740 – 750 ° C. Different degrees of cold plastic deformation was obtained by pre-selection of the initial strip thickness so that after a desired amount of rolling reduction receives the same final thickness. The microstructure was observed under a light microscope, the ferrite grain size was determined using a quantitative metallographic technique. The using of X-ray structural analysis techniques allowed determining the level of second-order distortion of the crystal latitude of the ferrite. The speed propagation of acoustic vibrations was measured using a special device such as an ISP-12 with a working frequency of pulses 1.024 kHz. As the characteristic of strength used the hardness was evaluated by the Brinell’s method. Findings. With increasing of ferrite grain size the hardness of the steel is reduced. In the case of constant structural state of metal, reducing the size of the ferrite grains is accompanied by a natural increasing of the phase distortion. The dependence of the speed propagation of acoustic vibrations up and down the rolling direction of the ferrite grain size remained unchanged and reports directly proportional correlation. Originality. On the basis of studies to determine the direct impact of the proportional nature of the ferrite grain size on the rate of propagation of sound

PESTICIDES USE AMONG GRAIN MERCHANTS IN MUBI GRAIN ...

African Journals Online (AJOL)

AGROSEARCH UIL

pose the greatest threat to increased food production, storage and handling ... are to: assess pest control practices of grain merchants in Mubi markets with a .... This further cements the fact that multiple routes of contaminations are possible.

CHOOSING THE RIGHT FORM OF LICENSING A BUSINESS IN ROMANIA

Directory of Open Access Journals (Sweden)

ROIBAN Roxana Nadina

2012-12-01

Full Text Available Choosing the most appropriate form of licensing a business is an important decision not easy to be made by an entrepreneur and it should be taken only after he has the required skills and abilities to do so. The business idea should harmonize with the business environment and its future trends, with the existing opportunities and the future products or services that the company will provide and not least the entrepreneur has to make sure that he has sufficient resources to get started. We consider that every business has a number of features that make certain forms of licensing to be more suitable than others. This paper aims to present a multitude of items to be reviewed by an entrepreneur at the start-up in order to choose the most appropriate licensing type for his business. Given that our country's law allows entrepreneurs to license their businesses in several forms, the decision to choose between many existing possibilities is a very important one for the future good of the business. Currently in our country there are two major laws governing the licensing of a business. The first one is the republished and subsequently amended Company Law number 31/1990 and the second, the Government Emergency Ordinance number 44/2008 regarding the economic activities of the Sole traders, Individual enterprises and Family enterprises. The Company Law number 31/1990 allows companies to choose between one of the five types of business entities that can operate in Romania: General partnership (in Romanian SNC, Limited partnership (in Romanian SCS, Limited partnerships by shares (in Romanian SCA, Joint stock company (in Romanian S.A. and Limited liability company (in Romanian S.R.L.. GEO number 44/2008 on economic activities of the Sole traders, Individual enterprises and Family enterprises regulates the licensing and the activity of a Sole traders, Individual enterprises and Family enterprises.

Diffusion mechanisms in grain boundaries in solids

International Nuclear Information System (INIS)

Peterson, N.L.

1982-01-01

A critical review is given of our current knowledge of grain-boundary diffusion in solids. A pipe mechanism of diffusion based on the well-established dislocation model seems most appropriate for small-angle boundaries. Open channels, which have atomic configurations somewhat like dislocation cores, probably play a major role in large-angle grain-boundary diffusion. Dissociated dislocations and stacking faults are not efficient paths for grain-boundary diffusion. The diffusion and computer modeling experiments are consistent with a vacancy mechanism of diffusion by a rather well-localized vacancy. The effective width of a boundary for grain-boundary diffusion is about two atomic planes. These general features of grain-boundary diffusion, deduced primarily from experiments on metals, are thought to be equally applicable for pure ceramic solids. The ionic character of many ceramic oxides may cause some differences in grain-boundary structure from that observed in metals, resulting in changes in grain-boundary diffusion behavior. 72 references, 5 figures

Development of a vegetable spreadable paste made from sorghum and millet whole grain flour

Directory of Open Access Journals (Sweden)

Nora Aimaretti

2013-06-01

Full Text Available Introduction: current nutritional guidelines recommend increasing the consumption of products based on whole grain cereals since they are rich in dietary fibers and bioactive components. The technological and sensory properties of these products are still a challenge for the food industry. The aim of the study was increase the availability of whole-grain based products through the development of aspreadable vegetable paste, pâté-type, suitable for the increasing celiac population.Material and Methods: sorghum and millet whole grain flours were obtained. The rest of the ingredients were evaluated and selected according to the characteristics desired for the product. The centesimal composition of the paste as well as its sensory properties and life time were analyzed.Results: the ingredients selected were (in %: margarine (16.7, sugar (1.1, salt (1.1, ascorbic acid (2.0, calcium propionate (0.3, pregelatinized starch (2.7, soy protein (25.1 and xanthan gum (0.5. The life time was followed for 28 days across (i chemical analysis of: humid (55.5-51.3%, p-value = 0.000741, peroxide index (<0.1 meqO2/Kg acid index (4.3-6.2 mgK(OH/g; (ii microbiological counts of: clostridium, Escherichia coli and Salmonella spp (absence, aerobic mesophiles, total coliforms, Staphylococcus aureus and moulds and yeasts which (<100; (iii sensory evaluation (acceptable.Conclusions: a spreadable paste was obtained which was 100% vegetable with organoleptic properties similar to those of a pâté, which can be stored for a period of 28 days.

Experiments on Dust Grain Charging

Science.gov (United States)

Abbas, M. N.; Craven, P. D.; Spann, J. F.; Tankosic, D.; LeClair, A.; West, E. A.

2004-01-01

Dust particles in various astrophysical environments are charged by a variety of mechanisms generally involving collisional processes with other charged particles and photoelectric emission with UV radiation from nearby sources. The sign and the magnitude of the particle charge are determined by the competition between the charging processes by UV radiation and collisions with charged particles. Knowledge of the particle charges and equilibrium potentials is important for understanding of a number of physical processes. The charge of a dust grain is thus a fundamental parameter that influences the physics of dusty plasmas, processes in the interplanetary medium and interstellar medium, interstellar dust clouds, planetary rings, cometary and outer atmospheres of planets etc. In this paper we present some results of experiments on charging of dust grains carried out on a laboratory facility capable levitating micron size dust grains in an electrodynamic balance in simulated space environments. The charging/discharging experiments were carried out by exposing the dust grains to energetic electron beams and UV radiation. Photoelectric efficiencies and yields of micron size dust grains of SiO2, and lunar simulates obtained from NASA-JSC will be presented.

Dynamics of interplanetary dust grains

International Nuclear Information System (INIS)

Lamy, P.L.

1975-01-01

The interaction of spherical grains of various materials-three silicates (quartz, obsidian and andesite), water-ice and iron - whose radii lie in the micronic and submicronic range with the interplanetary medium is solved. This includes: the interaction with the solar radiation field which is solved using Mie scattering theory and taking into account the precise dependence of the optical properties of the five materials upon wavelength; the interaction with the solar wind: corpuscular tangential drag is found to be always important and may even be larger than the Poynting-Robertson drag; the interaction with the interplanetary magnetic field is investigated in terms of a diffusion or random walk through a series of electromagnetic scatterings, leading to a Chapman-Komolgorov equation (i.e., a generalized Liouville equation). Numerical results are presented for these interactions spanning the entire solar system with circularity of elliptical orbits, direct or retrograde, with grains of various materials and sizes and giving -probably for the first time - a clear global picture of the interaction of dust grains with the interplanetary medium. The dynamics of the grains is then investigated using the theory of general perturbations and the numerical integration of trajectories of circum-solar grains

Increasing abscisic acid levels by immunomodulation in barley grains induces precocious maturation without changing grain composition.

Science.gov (United States)

Staroske, Nicole; Conrad, Udo; Kumlehn, Jochen; Hensel, Götz; Radchuk, Ruslana; Erban, Alexander; Kopka, Joachim; Weschke, Winfriede; Weber, Hans

2016-04-01

Abscisic acid (ABA) accumulates in seeds during the transition to the seed filling phase. ABA triggers seed maturation, storage activity, and stress signalling and tolerance. Immunomodulation was used to alter the ABA status in barley grains, with the resulting transgenic caryopses responding to the anti-ABA antibody gene expression with increased accumulation of ABA. Calculation of free versus antibody-bound ABA reveals large excess of free ABA, increasing signficantly in caryopses from 10 days after fertilization. Metabolite and transcript profiling in anti-ABA grains expose triggered and enhanced ABA-functions such as transcriptional up-regulation of sucrose-to-starch metabolism, storage protein synthesis and ABA-related signal transduction. Thus, enhanced ABA during transition phases induces precocious maturation but negatively interferes with growth and development. Anti-ABA grains display broad constitutive gene induction related to biotic and abiotic stresses. Most of these genes are ABA- and/or stress-inducible, including alcohol and aldehyde dehydrogenases, peroxidases, chaperones, glutathione-S-transferase, drought- and salt-inducible proteins. Conclusively, ABA immunomodulation results in precocious ABA accumulation that generates an integrated response of stress and maturation. Repression of ABA signalling, occurring in anti-ABA grains, potentially antagonizes effects caused by overshooting production. Finally, mature grain weight and composition are unchanged in anti-ABA plants, although germination is somewhat delayed. This indicates that anti-ABA caryopses induce specific mechanisms to desensitize ABA signalling efficiently, which finally yields mature grains with nearly unchanged dry weight and composition. Such compensation implicates the enormous physiological and metabolic flexibilities of barley grains to adjust effects of unnaturally high ABA amounts in order to ensure and maintain proper grain development. © The Author 2016. Published by

Conception, definition, measuring procedure of grain size

International Nuclear Information System (INIS)

Yanagisawa, Kazuaki

1976-12-01

The conception, definition, measuring procedure of ''Grain Size'' were surveyed. A concept ''grain diameter'' was introduced after deriving a calculation formula for the grain diameter for using the Comparison (simple) and Intercept(detailed) procedure. As an example and putting into practice, the grain diameter determination was carried out by means of the Comparison procedure for a UO 2 pellet used in a densification experiment. (auth.)

Whole grain intake: The Baltimore Longitudinal Study of Aging.

Science.gov (United States)

Maras, Janice E; Newby, P K; Bakun, Peter J; Ferrucci, Luigi; Tucker, Katherine L

2009-02-01

Our objective was to identify major dietary sources of whole grains and to describe the construction of a database of whole grain content of foods. Dietary information was collected with 7-d food records from men and women in the Baltimore Longitudinal Study of Aging, mean age 62.1 +/- 16.0 years, who participated in the dietary assessment portion of the study (n = 1516), and estimates of whole grain intake were obtained from a newly developed database. The Pyramid Servings database and 1994-1996 Continuing Survey of Food Intakes by Individuals (CSFII) recipe ingredients database were then used to calculate both servings and gram weights of whole grain intakes. Mean intakes of whole grains, refined grains, and total grains, as well as frequency of intake for major whole grain food groups and whole grain content for each group, were calculated. Top contributors of whole grains were ready-to-eat breakfast cereals (made with whole grain as well as bran), hot breakfast cereals (made with whole grain), multi-grain bread, and whole wheat bread. While more research is needed to better understand the benefits of whole grains, the development of research tools, including databases to accurately assess whole grain intake, is a critical step in completing such research.

Choose and Book: a sociological analysis of 'resistance' to an expert system.

Science.gov (United States)

Greenhalgh, Trisha; Stones, Rob; Swinglehurst, Deborah

2014-03-01

In 2004, the English Department of Health introduced a technology (Choose and Book) designed to help general practitioners and patients book hospital outpatient appointments. It was anticipated that remote booking would become standard practice once technical challenges were overcome. But despite political pressure and financial incentives, Choose and Book remained unpopular and was generally used reluctantly if at all. Policymakers framed this as a problem of 'clinician resistance'. We considered Choose and Book from a sociological perspective. Our dataset, drawn from a qualitative study of computer use in general practice, comprised background documents, field notes, interviews, clinical consultations (directly observed and videotaped) and naturally occurring talk relating to referral to hospital in four general practices. We used strong structuration theory, Giddens' conceptualisation of expert systems, and sensitivity to other sociological perspectives on technology, institutions and professional values to examine the relationship between the external environment, the evolving technology and actions of human agents (GPs, administrators, managers and patients). Choose and Book had the characteristics of an expert system. It served to 'empty out' the content of the consultation as the abstract knowledge it contained was assumed to have universal validity and to over-ride the clinician's application of local knowledge and practical wisdom. Sick patients were incorrectly assumed to behave as rational choosers, able and willing to decide between potential options using abstracted codified information. Our analysis revealed four foci of resistance: to the policy of choice that Choose and Book symbolised and purported to deliver; to accommodating the technology's socio-material constraints; to interference with doctors' contextual judgements; and to adjusting to the altered social relations consequent on its use. We conclude that 'resistance' is a complex phenomenon

The formation of small grains in shocks in the ISM

Science.gov (United States)

Jones, Anthony P.; Tielens, Alexander G. G. M.

1994-01-01

Carbonaceous and silicate grains swept up, and betatron accelerated, by supernova-generated shock waves in the interstellar medium are exposed to grain destructive processing. The degree of grain destruction is determined by the differential gas-grain and grain-grain velocities, which lead to sputtering of the grain surface and grain core disruption (deformation, vaporization and shattering), respectively. The threshold pressure for grain shattering in grain-grain collisions (100 k bar) is considerably lower than that for vaporization (approximately 5 M bar). Therefore, collisions between grains shatter large grains into smaller fragments (i.e., small grains and PAH's). Using a new algorithms for the destructive processes, it was possible to model the formation fo small grain fragments in grain-grain collisions in the warm phase of the interstellar medium. It was found that in one cycle through the warm medium (approximately 3 x 10(sup 6) years) of order 1-2% of the total grain mass is shattered into particles with radii of less than 50 A.

Teen lesbian desires and identities in international cinema: 1931-2007.

Science.gov (United States)

Beirne, Rebecca

2012-01-01

This article provides an overview of representations of teenage lesbian desires and/or identity in a global cinematic context, addressing twenty-seven films from fourteen nations released between 1931 and 2007. Despite temporal and geographical differences, three main forms of film texts emerged: those that engaged in sub or somewhat textual depictions of teen lesbian desires and relationships; others that offered a tragic take on lesbian desire; and the dominant form, engaging with a coming of age narrative structure.

Whole Grains: Hearty Options for a Healthy Diet

Science.gov (United States)

... in particular are an important part of a healthy diet. Grains are naturally high in fiber, helping you ... to make whole grains a part of your healthy diet. Also called cereals, grains and whole grains are ...

Grain Boundary Engineering of Electrodeposited Thin Films

DEFF Research Database (Denmark)

Alimadadi, Hossein

is not yet well-understood. This, at least partly, owes to the lack of robust characterization methods for analyzing the nature of grain boundaries including the grain boundary plane characteristics, until recently. In the past decade, significant improvements in the 2-dimensional and 3-dimensional analysis...... of the favorable boundaries that break the network of general grain boundaries. Successful dedicated synthesis of a textured nickel film fulfilling the requirements of grain boundary engineered materials, suggests improved boundary specific properties. However, the textured nickel film shows fairly low...... thermal stability and growth twins annihilate by thermal treatment at 600 degree C. In contrast, for oriented grains, growth nano-twins which are enveloped within columnar grains show a high thermal stability even after thermal treatment at 600 degree C. In order to exploit the high thermal...

Human Sexual Desire Disorder: Do We Have a Problem?

Science.gov (United States)

McNab, Warren L.; Henry, Jean

2006-01-01

Hypoactive Sexual Desire Disorder (HSDD), loss of sexual desire for sexual activity, is one of the most common sexual dysfunctions of men and women in the United States. This article presents an overview of this specific sexual dysfunction including incidence, possible causes, treatment options, and the role of the health educator in addressing…

Paralyzed by desire: a new type of body integrity identity disorder.

Science.gov (United States)

Giummarra, Melita J; Bradshaw, John L; Hilti, Leonie M; Nicholls, Michael E R; Brugger, Peter

2012-03-01

Body incongruity in body integrity identity disorder (BIID) manifests in the desire to have a healthy limb amputated. We describe a variant of the disorder: the desire to become paralyzed (paralysis-BIID). Sixteen otherwise healthy participants, recruited through Internet-based forums, websites, or word of mouth, completed questionnaires about details of their desire and accompanying symptoms. Onset of the desire for paralysis typically preceded puberty. All participants indicated a specific level for desired spinal cord injury. All participants simulated paralysis through mental imagery or physical pretending, and 9 (56%) reported erotic interest in paraplegia and/or disability. Our key new finding was that 37.5% of paralysis-BIID participants were women, compared with 4.4% women in a sample of 68 individuals with amputation-BIID. BIID reflects a disunity between self and body, usually with a prominent sexual component. Sex-related differences are emerging: unlike men, a higher proportion of women desire paralysis than desire amputation, and, while men typically seek unilateral amputation, women typically seek bilateral amputation. We propose that these sex-related differences in BIID manifestation may relate to sex differences in cerebral lateralization, or to disruption of representation and/or processing of body-related information in right-hemisphere frontoparietal networks.

Levels of fungi and mycotoxins in the samples of grain and grain dust collected from five various cereal crops in eastern Poland.

Science.gov (United States)

Krysińska-Traczyk, Ewa; Perkowski, Juliusz; Dutkiewicz, Jacek

2007-01-01

During combine harvesting of 5 various cereal crops (rye, barley, oats, buckwheat, corn) 24 samples of grain and 24 samples of settled grain dust were collected on farms located in the Lublin province of eastern Poland. The samples were examined for the concentration of total microfungi, Fusarium species, deoxynivalenol (DON), nivalenol (NIV), and ochratoxin A (OTA). Microfungi able to grow on malt agar were present in 79.2% of grain samples and in 91.7% of grain dust samples in the concentrations of 1.0-801.3x10(3) cfu/g and 1.5-12440.0x10(3) cfu/g, respectively. The concentration of microfungi in grain dust samples was significantly greater than in grain samples (pgrain samples and from 58.3% of grain dust samples in the concentrations of 0.1-375.0x10(3) cfu/g and 4.0-7,700.0x10(3) cfu/g, respectively. They were found in all samples of grain and grain dust from rye, barley and corn, but only in 0-16.7% of samples of grain and grain dust from oats and buckwheat. DON was found in 79.2% of grain samples and in 100% of grain dust samples in the concentrations of 0.001-0.18 microg/g and 0.006-0.283 microg/g, respectively. NIV was detected in 62.5% of grain samples and in 94.4% of grain dust samples in the concentrations of 0.004-0.502 microg/g and 0.005-0.339 microg/g, respectively. OTA was detected in 58.3% of grain samples and in 91.7% of grain dust samples in the concentrations of 0.00039- 0.00195 microg/g and 0.00036-0.00285 microg/g, respectively. The concentrations of DON, total fusariotoxins (DON+NIV) and OTA were significantly greater in grain dust samples than in grain samples (pgrain and dust was significantly correlated with the concentrations of DON (pgrain and dust was significantly correlated with the concentration of total fusariotoxins (pgrain dust collected from 5 various cereals on farms in eastern Poland was not large, the persistent presence of these mycotoxins in over 90% of examined samples poses a potential health risk of chronic respiratory

Health benefits of ancient grains. Comparison among bread made with ancient, heritage and modern grain flours in human cultured cells.

Science.gov (United States)

Valli, Veronica; Taccari, Annalisa; Di Nunzio, Mattia; Danesi, Francesca; Bordoni, Alessandra

2018-05-01

Nowadays the higher nutritional value of whole grains compared to refined grains is recognized. In the last decade, there has been a renewed interest in the ancient wheat varieties for producing high-value food products with enhanced health benefits. This study compared two ancient grains, two heritage grains, and four modern grains grown in the same agronomic conditions considering not only their chemical characteristics, but also their biological effects. Whole grain flours were obtained and used to make bread. Bread was in vitro digested, the digesta were supplemented to HepG2 cells, and the biological effects of supplementation were evaluated. In addition, cells previously supplemented with the different digested bread types were then exposed to inflammatory agents to evidence possible protective effects of the pre-treatments. Despite the impossibility to discriminate bread made with different grains based on their chemical composition, results herein reported evidence that their supplementation to cultured cells exerts different effects, confirming the potential health benefits of ancient grains. This research represents an advancement for the evaluation of the apparent positive effects of ancient grains and the formulation of cereal-based products with added nutritional value. Copyright © 2018 Elsevier Ltd. All rights reserved.

Consumer Decision-Making Based on Review Websites: Are There Differences Between Choosing a Hotel and Choosing a Physician?

Science.gov (United States)

Rothenfluh, Fabia; Germeni, Evi; Schulz, Peter J

2016-06-16

Web users are increasingly encouraged to rate and review consumer services (eg, hotels, restaurants) and, more recently, this is also the case for physicians and medical services. The resemblance in the setup and design of commercial rating websites (CRWs) and Web-based physician rating websites (PRWs) raises the question of whether choice-making processes based on the two types of websites could also be similar. This qualitative study sought to explore the extent to which consumer decision making based on Web-based reviews is the same for consumer services (ie, choice of a hotel) and health services (ie, choice of a pediatrician), while providing an in-depth understanding of potential differences or similarities. Between June and August 2015, we carried out a total of 22 qualitative interviews with young parents residing in the German-speaking part of Switzerland. Participants were invited to complete 2 choice tasks, which involved (1) choosing a hotel based on the commercial Web-based rating website TripAdvisor and (2) selecting a pediatrician based on the PRW Jameda. To better understand consumers' thought processes, we instructed participants to "think aloud", namely to verbalize their thinking while sorting through information and reaching decisions. Using a semistructured interview guide, we subsequently posed open-ended questions to allow them to elaborate more on factors influencing their decision making, level of confidence in their final choice, and perceived differences and similarities in their search for a hotel and a physician. All interviews were recorded, transcribed, and analyzed using an inductive thematic approach. Participants spent on average 9:57 minutes (standard deviation=9:22, minimum=3:46, maximum=22:25) searching for a hotel and 6:17 minutes (standard deviation=4:47, minimum=00:38, maximum=19:25) searching for a pediatrician. Although the choice of a pediatrician was perceived as more important than the choice of a hotel, participants

Grain nucleation and growth during phase transformations

DEFF Research Database (Denmark)

Offerman, S.E.; Dijk, N.H. van; Sietsma, J.

2002-01-01

of individual grains. Our measurements show that the activation energy for grain nucleation is at least two orders of magnitude smaller than that predicted by thermodynamic models. The observed growth curves of the newly formed grains confirm the parabolic growth model but also show three fundamentally...... different types of growth. Insight into the grain nucleation and growth mechanisms during phase transformations contributes to the development of materials with optimal mechanical properties....

On the elastic stiffness of grain boundaries

International Nuclear Information System (INIS)

Zhang Tongyi; Hack, J.E.

1992-01-01

The elastic softening of grain boundaries is evaluated from the starting point of grain boundary energy. Several examples are given to illustrate the relationship between boundary energy and the extent of softening. In general, a high grain boundary energy is associated with a large excess atomic volume in the boundary region. The consequent reduction in grain boundary stiffness can represent a significant fraction of that observed in bulk crystals. (orig.)

The Coarse-Grained/Fine-Grained Logic Interface in FPGAs with Embedded Floating-Point Arithmetic Units

Directory of Open Access Journals (Sweden)

Chi Wai Yu

2008-01-01

Full Text Available This paper examines the interface between fine-grained and coarse-grained programmable logic in FPGAs. Specifically, it presents an empirical study that covers the location, pin arrangement, and interconnect between embedded floating point units (FPUs and the fine-grained logic fabric in FPGAs. It also studies this interface in FPGAs which contain both FPUs and embedded memories. The results show that (1 FPUs should have a square aspect ratio; (2 they should be positioned near the center of the FPGA; (3 their I/O pins should be arranged around all four sides of the FPU; (4 embedded memory should be located between the FPUs; and (5 connecting higher I/O density coarse-grained blocks increases the demand for routing resources. The hybrid FPGAs with embedded memory required 12% wider channels than the case where embedded memory is not used.

Distinguishing the desire to learn from the desire to perform: The social value of achievement goals.

Science.gov (United States)

Cohen, Joanna; Darnon, Céline; Mollaret, Patrick

2017-01-01

We sought to distinguish mastery goals (i.e., desire to learn) from performance goals (i.e., desire to achieve more positive evaluations than others) in the light of social judgment research. In a pilot study, we made a conceptual distinction between three types of traits (agency, competence, and effort) that are often undifferentiated. We then tested the relevance of this distinction for understanding how people pursuing either mastery or performance goals are judged. On self-perception, results revealed that effort was predicted by the adoption of mastery goals and agency by performance goals (Study 1). On judgments, results showed that (a) the target pursuing mastery goals was perceived as oriented toward effort, and (b) the target pursuing performance goals was oriented toward agency (Study 2). Finally, these links were shown again by participants who inferred a target's goals from his traits (Study 3). Results are discussed in terms of the social value of achievement goals at school.

Motives and career barriers choosing studies in Physics and Mathematics: gender aspects

Directory of Open Access Journals (Sweden)

Aldona, Augustiene

2010-04-01

Full Text Available This article discusses the concepts of professional motivation and career barriers from the gender point of view. The research problem is expressed in the following questions: what personal and socio-cultural factors motivate young people to choose Physics and Mathematics study programmes? Are there significant differences in expression of motives and career barriers among male and female students? The sample consisted of 86 undergraduate students: 45 females and 41 male. Respondents were asked to write down their reflections as a free text answering the question why did they make such a professional choice choosing Physics and Mathematics studies. Motives that influenced the choice of Physics and Mathematics mostly expressed the dimension of self-realization and the dimension of material achievements. It was also found that both personality and social-cultural factors were important in choosing Physics and Mathematics, i.e. sensation of vocation and professional aptitude, as well as encouragement of relatives and good evaluation of future profession’s status. There were also found differences in expression of motives and career barriers among male and female students.

Breaking up with Deleuze: Desire and Valuing the Irreconcilable

Science.gov (United States)

Tuck, Eve

2010-01-01

In this article, Eve Tuck grapples with Gilles Deleuze's conceptualization of desire, finding it simultaneously generative and unsatisfying. Recognizing that Deleuze will not "say" what Tuck wants him to say about desire--that it is smart, and constitutes expertise--Tuck reasons that there is only one thing she can do: break up with Deleuze. The…

[The research protocol VI: How to choose the appropriate statistical test. Inferential statistics].

Science.gov (United States)

Flores-Ruiz, Eric; Miranda-Novales, María Guadalupe; Villasís-Keever, Miguel Ángel

2017-01-01

The statistical analysis can be divided in two main components: descriptive analysis and inferential analysis. An inference is to elaborate conclusions from the tests performed with the data obtained from a sample of a population. Statistical tests are used in order to establish the probability that a conclusion obtained from a sample is applicable to the population from which it was obtained. However, choosing the appropriate statistical test in general poses a challenge for novice researchers. To choose the statistical test it is necessary to take into account three aspects: the research design, the number of measurements and the scale of measurement of the variables. Statistical tests are divided into two sets, parametric and nonparametric. Parametric tests can only be used if the data show a normal distribution. Choosing the right statistical test will make it easier for readers to understand and apply the results.

The research protocol VI: How to choose the appropriate statistical test. Inferential statistics

Directory of Open Access Journals (Sweden)

Eric Flores-Ruiz

2017-10-01

Full Text Available The statistical analysis can be divided in two main components: descriptive analysis and inferential analysis. An inference is to elaborate conclusions from the tests performed with the data obtained from a sample of a population. Statistical tests are used in order to establish the probability that a conclusion obtained from a sample is applicable to the population from which it was obtained. However, choosing the appropriate statistical test in general poses a challenge for novice researchers. To choose the statistical test it is necessary to take into account three aspects: the research design, the number of measurements and the scale of measurement of the variables. Statistical tests are divided into two sets, parametric and nonparametric. Parametric tests can only be used if the data show a normal distribution. Choosing the right statistical test will make it easier for readers to understand and apply the results.

Diapers: What do Parents Choose and Why?

OpenAIRE

Shanon, Amir; Feldman, William; James, William; Dulberg, Corinne

1990-01-01

Self-administered questionnaires about diaper choices and the reasons for such choices were completed by 600 parents of children younger than two years of age attending a hospital walk-in clinic or the private office of one of four pediatricians. Only 2.7% of the parents used cloth alone; another 15% used both cloth and disposable diapers; a further 18% reported having used cloth at some time. Convenience and rash prevention were reasons for choosing disposable diapers. Those who used only cl...

Evolution of grain structure in nickel oxide scales

International Nuclear Information System (INIS)

Atkinson, H.V.

1987-01-01

In systems such as the oxidation of nickel, in which grain-boundary diffusion in the oxide can control the rate of oxidation, understanding of the factors governing the grain structure is of importance. High-purity mechanically polished polycrystalline nickel was oxidized at 700 0 C, 800 0 C, and 1000 0 C for times up to 20 hr in 1 atm O 2 . The scale microstructures were examined by parallel and transverse cross section transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Texture coefficients were found by x-ray diffraction (XRD). Each grain in the transverse section grain boundary networks was systematically analyzed for width parallel to the Ni-NiO interface and perpendicular length, for boundary radius of curvature and for number of sides. The variation of these parameters with depth in the scale was examined. In particular, grains were increasingly columnar (i.e., with ratio of grain length to width > 1) at higher temperatures and longer times. Columnar grain boundaries tended to be fairly static; the columnar grain width was less than the rate controlling grain size predicted from the oxidation rate. The mean boundary curvature per grain provided a guide to the tendency for grain growth, except in the region of the Ni-NiO interface, where the boundaries were thought to be pinned

Stochastic theory of grain growth

International Nuclear Information System (INIS)

Hu Haiyun; Xing Xiusan.

1990-11-01

The purpose of this note is to set up a stochastic theory of grain growth and to derive the statistical distribution function and the average value of the grain radius so as to match them with the experiment further. 8 refs, 1 fig

Can Whole-Grain Foods Lower Blood Pressure?

Science.gov (United States)

... eating more whole-grain foods help lower my blood pressure? Answers from Sheldon G. Sheps, M.D. It might. Eating ... might help reduce your chance of developing high blood pressure (hypertension). Whole grains are grains that include the ...

High temperature microplasticity of fine-grained ceramics

International Nuclear Information System (INIS)

Lakki, A.; Schaller, R.

1996-01-01

Several fine-grained ceramics exhibit enhanced ductility or even structural superplasticity at high temperature. Grain boundaries play a dominant role in the deformation process of these materials which usually involves diffusion-accommodated grain boundary sliding. Sliding is either lubricated by an amorphous intergranular phase or takes place by glide and climb of grain boundary dislocations. At high temperature, anelastic deformation precedes plastic deformation and stems from the short range motion of lattice defects, such as dislocations and grain boundaries. The energy loss (''mechanical loss'') associated with such motion can be measured by using the technique of mechanical spectroscopy. Moreover, at the onset of plasticity (''microplasticity''), long range irrecoverable motion of defects contributes to additional mechanical loss. Mechanical loss spectra may then give an insight into mechanisms operating at the transition between anelastic and plastic deformation. As an illustration, the spectra of three fine-grained ceramics (Si 3 N 4 , ZrO 2 , Al 2 O 3 ) are presented. In all cases, anelastic relaxation phenomena (peak and background) have been observed at high temperature (> 1200 K), bearing a close relation with creep behaviour. Their analysis permits to distinguish between different types of microstructrual elements: bulk regions of amorphous intergranular phase at triple points, grain boundaries separated by a thin glassy film and ''clean'' grain boundaries. (orig.)

Use of induced mutations for the improvement of grain legume production in Southeast Asia

Energy Technology Data Exchange (ETDEWEB)

NONE

1976-07-01

The improvement of grain legume production encompasses numerous possible actions. Some of these include (1) the upgrading of the quality of seeds used by farmers, (2) insurance that effective symbiotic nitrogen fixation is carried out through the use of effective inoculants, and (3) the development of superior, high-yielding, pathogen-resistant new varieties of crop varieties through plant breeding. It is only the last of these topics which was considered in detail at the Sri Lanka seminar. This meeting was organized with the dual purpose of identifying breeding objectives in the grain legumes and also to suggest ways in which induced mutations may be used in attaining these objectives. The work of the meeting was systematized by considering the complex task of defining breeding objectives as follows: A. Plant architecture: Breeders put forth ideas as to what the most desirable features of plant morphology should be with respect to different crop species and for local conditions. B. Disease and pest resistance: Breeders spoke about the major pathogens and pests which affect specific grain legume crops grown in different countries at different times. The magnitude of the problem was also indicated along with the availability of genetic resources with which to breed against particular pests. C. Physiological characters: Such topics as photoperiodic sensitivity, seed viability, nitrogen fixation, maturity time and other characteristics were considered and the ways in which these factors affect production. Following these discussions, the group documented the breeding needs for the major grain legumes of the region. In this context the participants were asked to identify potential situations where the induced mutation approach to plant breeding would prove valuable. During the meeting, breeders from different countries, unknown to one another previously, who work towards almost identical objectives, established communication and even arranged to begin to exchange germ

Time under control: time perspective and desire for control in substance use.

Science.gov (United States)

Fieulaine, Nicolas; Martinez, Frederic

2010-08-01

To investigate the role of time perspective and desire for control in self-reported substance use and to test for a moderating effect of desire for control in the relation between time perspective and substance use. A random sample of 240 persons, aged 15 years and over, selected in various public spaces in an urban region in central France. Time perspective was measured using subscales of the Zimbardo Time Perspective Inventory (ZTPI, Zimbardo & Boyd, 1999), Desire for control was measured using a translated version of the Desire for Control Scale (DCS, Burger & Cooper, 1979), and substance use was self-reported. After controlling for age and gender, significant links were found between time perspective and substance use. Desire for control did not appear to be directly related to substance use. The interaction effect between TP and desire for control appeared to be related to substance use. There was evidence that the relation between TP and substance use is buffered by low desire for control. This study converges with previous studies demonstrating the relation between TP and substance use, but provides evidence of the moderating role played by desire for control. Desire for control thus appears as worthy of interest in the analysis of self-regulatory process, and further research on the links between TP and various aspects of control is required. In order to be more effective, the design of future studies and interventions based on time-related issues should consider how desire for control plays a part in establishing vulnerability profiles. Copyright 2010 Elsevier Ltd. All rights reserved.

Effect of salinity on grain yield and grain quality of wheat (triticum aestivum l.)

International Nuclear Information System (INIS)

Abbas, G.; Saqib, M.; Rafique, Q.; Rahman, A.U.; Akhtar, J.; Haq, M.A.U.

2013-01-01

Salinity is one of the important stresses resulting in the reduction of growth and yield of different crops including wheat. In saline soils the concentration of Na/sup +/ and Cl/sup -/ is higher accompanied with the decreased K/sup +/: Na/sup +/ ratio thus severely affecting the growth and yield of crops. The effect of salinity on the growth and yield of wheat is well documented, whereas there is very little information about salinity tolerance and grain quality of wheat. Present study was conducted to assess the effect of salinity on yield components, ionic relations and grain quality and to understand the relationship among these parameters. A pot experiment was conducted using wheat genotype Pasban-90. There were two treatments i.e. non-saline (0.33 dS m/sup -1/) and saline (15 dS m/sup -1/) with five replications. Salinity resulted in a significant reduction of the grain protein, fat and fiber contents. Similarly yield components were significantly reduced. Maximum reduction was noted in case of number of tillers plant/sup -1/, followed by grain weight plant/sup -1/. High Na/sup +/ and low K/sup +/, P concentration and K/sup +/: Na/sup +/ ratio was observed in the shoot, root and grain. This disturbed ionic composition seems to be apparent cause of yield reduction and deterioration of wheat quality under salinity. (author)

Measurement and modeling of radiation-induced grain boundary grain boundary segregation in stainless steels

International Nuclear Information System (INIS)

Bruemmer, S.M.; Charlot, L.A.; Simonen, E.P.

1995-08-01

Grain boundary radiation-induced segregation (RIS) in Fe-Ni-Cr stainless alloys has been measured and modelled as a function of irradiation temperature and dose. Heavy-ion irradiation was used to produce damage levels from 1 to 20 displacements per atom (dpa) at temperatures from 175 to 550 degrees C. Measured Fe, Ni, and Cr segregation increased sharply with irradiation dose (from 0 to 5 dpa) and temperature (from 175 to about 350 degrees C). However, grain boundary concentrations did not change significantly as dose or temperatures were further increased. Impurity segregation (Si and P) was also measured, but only Si enrichment appeared to be radiation-induced. Grain boundary Si levels peaked at an intermediate temperature of ∼325 degrees C reaching levels of ∼8 at. %. Equilibrium segregation of P was measured in the high-P alloys, but interfacial concentration did not increase with irradiation exposure. Examination of reported RIS in neutron-irradiated stainless steels revealed similar effects of irradiation dose on grain boundary compositional changes for both major alloying and impurity element's. The Inverse Kirkendall model accurately predicted major alloying element RIS in ion- and neutron-irradiated alloys over the wide range of temperature and dose conditions. In addition, preliminary calculations indicate that the Johnson-Lam model can reasonably estimate grain boundary Si enrichment if back diffusion is enhanced

Patterns of Workplace Supervisor Support Desired by Abused Women

Science.gov (United States)

Perrin, Nancy A.; Yragui, Nanette L.; Hanson, Ginger C.; Glass, Nancy

2011-01-01

The purpose of this study was to understand differences in patterns of supervisor support desired by female victims of intimate partner violence (IPV) and to examine whether the pattern of support desired at work is reflective of a woman's stage of change in the abusive relationship, IPV-related work interference, and IPV-related job reprimands or…

Predictive coarse-graining

Energy Technology Data Exchange (ETDEWEB)

Schöberl, Markus, E-mail: m.schoeberl@tum.de [Continuum Mechanics Group, Technical University of Munich, Boltzmannstraße 15, 85748 Garching (Germany); Zabaras, Nicholas [Institute for Advanced Study, Technical University of Munich, Lichtenbergstraße 2a, 85748 Garching (Germany); Department of Aerospace and Mechanical Engineering, University of Notre Dame, 365 Fitzpatrick Hall, Notre Dame, IN 46556 (United States); Koutsourelakis, Phaedon-Stelios [Continuum Mechanics Group, Technical University of Munich, Boltzmannstraße 15, 85748 Garching (Germany)

2017-03-15

We propose a data-driven, coarse-graining formulation in the context of equilibrium statistical mechanics. In contrast to existing techniques which are based on a fine-to-coarse map, we adopt the opposite strategy by prescribing a probabilistic coarse-to-fine map. This corresponds to a directed probabilistic model where the coarse variables play the role of latent generators of the fine scale (all-atom) data. From an information-theoretic perspective, the framework proposed provides an improvement upon the relative entropy method and is capable of quantifying the uncertainty due to the information loss that unavoidably takes place during the coarse-graining process. Furthermore, it can be readily extended to a fully Bayesian model where various sources of uncertainties are reflected in the posterior of the model parameters. The latter can be used to produce not only point estimates of fine-scale reconstructions or macroscopic observables, but more importantly, predictive posterior distributions on these quantities. Predictive posterior distributions reflect the confidence of the model as a function of the amount of data and the level of coarse-graining. The issues of model complexity and model selection are seamlessly addressed by employing a hierarchical prior that favors the discovery of sparse solutions, revealing the most prominent features in the coarse-grained model. A flexible and parallelizable Monte Carlo – Expectation–Maximization (MC-EM) scheme is proposed for carrying out inference and learning tasks. A comparative assessment of the proposed methodology is presented for a lattice spin system and the SPC/E water model.

Why Do Patients Choose to Consult Homeopaths? | McIntosh ...

African Journals Online (AJOL)

Background: Patients are using homeopathy in increasing numbers and not telling their doctors about it. It is important as family physicians that we understand the reasons why patients choose to consult homeopaths. It is important to know what our patients are looking for that they do not find in Western medicine.

The analyst's desire in the clinic of anorexia

OpenAIRE

Silva, Mariana Benatto Pereira da; Pereira, Mario Eduardo Costa; Celeri, Eloísa Helena Valler

2010-01-01

The present work deals with the issue of the analyst's desire in the psychoanalytical treatment of anorexia. It analyzes important elements to establish transference in these cases, as the pursuit of death and the choice of refusing food as a way of controlling the demands of the Other. It then discusses the "analist's desire" function in this clinic. Rejecting the definition of a treatment model and the structural categorization of anorexia, we can find in the cases of the girl of Angouleme ...

Do prostate cancer patients want to choose their own radiation treatment?

International Nuclear Information System (INIS)

Tol-Geerdink, Julia J. van; Stalmeier, Peep F.M.; Lin, Emile N.J.T. van; Schimmel, Erik C.; Huizenga, Henk; Daal, Wim A.J. van; Leer, Jan-Willem

2006-01-01

Purpose: The aims of this study were to investigate whether prostate cancer patients want to be involved in the choice of Radiation dose, and which patients want to be involved. Methods and Materials: This prospective study involved 150 patients with localized prostate cancer treated with three-dimensional conformal radiotherapy. A decision aid was used to explain the effects of two alternative radiation doses (70 and 74 Gy) in terms of cure and side effects. Patients were then asked whether they wanted to choose their treatment (accept choice), or leave the decision to the physician (decline choice). The treatment preference was carried out. Results: Even in this older population (mean age, 70 years), most patients (79%) accepted the option to choose. A lower score on the designations Pre-existent bowel morbidity, Anxiety, Depression, Hopelessness and a higher score on Autonomy and Numeracy were associated with an increase in choice acceptance, of which only Hopelessness held up in multiple regression (p < 0.03). The uninformed participation preference at baseline was not significantly related to choice acceptance (p = 0.10). Conclusion: Uninformed participation preference does not predict choice behavior. However, once the decision aid is provided, most patients want to choose their treatment. It should, therefore, be considered to inform patients first and ask participation preferences afterwards

Choosing R&D or advertising for competing firms in uncertain market

Directory of Open Access Journals (Sweden)

Bo Xie

2014-06-01

Full Text Available Purpose: R&D and advertising have become important means to enhance the competitiveness of firms’ products. Design an appropriate model to help the firm to make the right choice is value in supply chain.Design/methodology/approach: In considering that whether the market is completely covered or not, we build the strategy selection model for R&D and advertising for two competing firms and solve the optimal strategy.Findings and Originality/value: The research results show that when a firm does not take any measures to enhance competitiveness, another firm will neither. However when one takes measures to improve the competitiveness, another will do so, also. When two firms must choose one measure to improve the competitiveness, either in full-covered market or not full-covered market, the two firms will not choose to do advertising in step, even if the firms do not have to pay additional cost in advertising.Originality/value: In the game model, the firm could compare the own profit in different strategies. According to the above model, the firm choose the right strategy to make the profit maximize in a vertically differentiated market. And when the firm make the choice, it must think about other primary elements such as market.

Work Tasks as Determinants of Grain Dust and Microbial Exposure in the Norwegian Grain and Compound Feed Industry.

Science.gov (United States)

Straumfors, Anne; Heldal, Kari Kulvik; Wouters, Inge M; Eduard, Wijnand

2015-07-01

The grain and compound feed industry entails inevitable risks of exposure to grain dust and its microbial content. The objective of this study was therefore to investigate task-dependent exposure differences in order to create knowledge basis for awareness and exposure reducing measures in the Norwegian grain and compound feed industry. A total of 166 samples of airborne dust were collected by full-shift personal sampling during work in 20 grain elevators and compound feed mills during one autumn season and two winter seasons. The personal exposure to grain dust, endotoxins, β-1→3-glucans, bacteria, and fungal spores was quantified and used as individual outcomes in mixed models with worker nested in company as random effect and different departments and tasks as fixed effects. The exposure levels were highest in grain elevator departments. Exposure to endotoxins was particularly high. Tasks that represented the highest and lowest exposures varied depending on the bioaerosol component. The most important determinants for elevated dust exposure were cleaning and process controlling. Cleaning increased the dust exposure level by a factor of 2.44 of the reference, from 0.65 to 1.58mg m(-3), whereas process controlling increased the dust exposure level by a factor of 2.97, from 0.65 to 1.93mg m(-3). Process controlling was associated with significantly less grain dust exposure in compound feed mills and the combined grain elevators and compound feed mills, than in grain elevators. The exposure was reduced by a factor of 0.18 and 0.22, from 1.93 to 0.34mg m(-3) and to 0.42mg m(-3), respectively, compared with the grain elevators. Inspection/maintenance, cleaning, and grain rotation and emptying were determinants of higher exposure to both endotoxin and β-1→3-glucans. Seed winnowing was in addition a strong determinant for endotoxin, whereas mixing of animal feed implied higher β-1→3-glucan exposure. Cleaning was the only task that contributed significantly to

Foreword: Biology/embodiment/desire.

Science.gov (United States)

Terry, Jennifer; Willey, Angela

2018-04-03

The sexological roots of "lesbian" and the "queer" turn from biologized categories of sexual difference pose an exciting set of questions and tensions for thinking about queer feminism and biological meanings. This issue seeks to open space to explore how we might reconcile assumptions about "female same-sex sexuality" that often accompany "lesbian" with queer and trans-feminist treatments of science, embodiment, and desiring, while at the same time insisting on the importance of an undertheorized dyke legacy for thinking the at-once material and political nature of sexuality.

Visualizing desirable patient healthcare experiences.

Science.gov (United States)

Liu, Sandra S; Kim, Hyung T; Chen, Jie; An, Lingling

2010-01-01

High healthcare cost has drawn much attention and healthcare service providers (HSPs) are expected to deliver high-quality and consistent care. Therefore, an intimate understanding of the most desirable experience from a patient's and/or family's perspective as well as effective mapping and communication of such findings should facilitate HSPs' efforts in attaining sustainable competitive advantage in an increasingly discerning environment. This study describes (a) the critical quality attributes (CQAs) of the experience desired by patients and (b) the application of two visualization tools that are relatively new to the healthcare sector, namely the "spider-web diagram" and "promotion and detraction matrix." The visualization tools are tested with primary data collected from telephone surveys of 1,800 patients who had received care during calendar year 2005 at 6 of 61 hospitals within St. Louis, Missouri-based, Ascension Health. Five CQAs were found by factor analysis. The spider-web diagram illustrates that communication and empowerment and compassionate and respectful care are the most important CQAs, and accordingly, the promotion and detraction matrix shows those attributes that have the greatest effect for creating promoters, preventing detractors, and improving consumer's likelihood to recommend the healthcare provider.