Towards a Conceptual Framework for WikiGIS

Directory of Open Access Journals (Sweden)

Wided Batita

2014-10-01

Full Text Available As an emerging complex concept, GeoDesign requires an innovative theoretical basis, tools, supports and practices. For this reason, we propose a new concept, “WikiGIS”, designed to answer some dimensions of the GeoDesign process. WikiGIS focuses on the needs of GeoDesign, but we leave the door open for future improvement when tested in other areas that may have additional needs. WikiGIS is built on Web 2.0 technologies—and primarily on wiki—to manage the tracking of participants’ editing (i.e., managing the contributions history. It also offers GIS functions for geoprocessing and a design-based approach for sketching proposals. One of the main strengths of WikiGIS is its ability to manage the traceability of contributions with an easy and dynamical access, data quality and deltification. The core of this paper consists of presenting a conceptual framework for WikiGIS using UML diagrams. A user interface is presented later to show how our WikiGIS proposal works. This interface is simply a means to illustrate the concepts underlying WikiGIS.

Evaluation of SOVAT: An OLAP-GIS decision support system for community health assessment data analysis

Directory of Open Access Journals (Sweden)

Parmanto Bambang

2008-06-01

Full Text Available Abstract Background Data analysis in community health assessment (CHA involves the collection, integration, and analysis of large numerical and spatial data sets in order to identify health priorities. Geographic Information Systems (GIS enable for management and analysis using spatial data, but have limitations in performing analysis of numerical data because of its traditional database architecture. On-Line Analytical Processing (OLAP is a multidimensional datawarehouse designed to facilitate querying of large numerical data. Coupling the spatial capabilities of GIS with the numerical analysis of OLAP, might enhance CHA data analysis. OLAP-GIS systems have been developed by university researchers and corporations, yet their potential for CHA data analysis is not well understood. To evaluate the potential of an OLAP-GIS decision support system for CHA problem solving, we compared OLAP-GIS to the standard information technology (IT currently used by many public health professionals. Methods SOVAT, an OLAP-GIS decision support system developed at the University of Pittsburgh, was compared against current IT for data analysis for CHA. For this study, current IT was considered the combined use of SPSS and GIS ("SPSS-GIS". Graduate students, researchers, and faculty in the health sciences at the University of Pittsburgh were recruited. Each round consisted of: an instructional video of the system being evaluated, two practice tasks, five assessment tasks, and one post-study questionnaire. Objective and subjective measurement included: task completion time, success in answering the tasks, and system satisfaction. Results Thirteen individuals participated. Inferential statistics were analyzed using linear mixed model analysis. SOVAT was statistically significant (α = .01 from SPSS-GIS for satisfaction and time (p Conclusion Using SOVAT, tasks were completed more efficiently, with a higher rate of success, and with greater satisfaction, than the

GIS to support cost-effective decisions on renewable sources applications for low temperature geothermal energy

CERN Document Server

Gemelli, Alberto; Diamantini, Claudia; Longhi, Sauro

2013-01-01

Through the results of a developed case study of information system for low temperature geothermal energy, GIS to Support Cost-effective Decisions on Renewable Sources addresses the issue of the use of Geographic Information Systems (GIS) in evaluating cost-effectiveness of renewable resource exploitation regional scale. Focusing on the design of a Decision Support System, a process is presented aimed to transform geographic data into knowledge useful for analysis and decision-making on the economic exploitation of geothermal energy. This detailed description includes a literature review and technical issues related to data collection, data mining, decision analysis for the informative system developed for the case study. A multi-disciplinary approach to GIS design is presented which is also an innovative example of fusion of georeferenced data acquired from multiple sources including remote sensing, networks of sensors and socio-economic censuses. GIS to Support Cost-effective Decisions on Renewable Sources ...

GRASS GIS: The first Open Source Temporal GIS

Science.gov (United States)

Gebbert, Sören; Leppelt, Thomas

2015-04-01

GRASS GIS is a full featured, general purpose Open Source geographic information system (GIS) with raster, 3D raster and vector processing support[1]. Recently, time was introduced as a new dimension that transformed GRASS GIS into the first Open Source temporal GIS with comprehensive spatio-temporal analysis, processing and visualization capabilities[2]. New spatio-temporal data types were introduced in GRASS GIS version 7, to manage raster, 3D raster and vector time series. These new data types are called space time datasets. They are designed to efficiently handle hundreds of thousands of time stamped raster, 3D raster and vector map layers of any size. Time stamps can be defined as time intervals or time instances in Gregorian calendar time or relative time. Space time datasets are simplifying the processing and analysis of large time series in GRASS GIS, since these new data types are used as input and output parameter in temporal modules. The handling of space time datasets is therefore equal to the handling of raster, 3D raster and vector map layers in GRASS GIS. A new dedicated Python library, the GRASS GIS Temporal Framework, was designed to implement the spatio-temporal data types and their management. The framework provides the functionality to efficiently handle hundreds of thousands of time stamped map layers and their spatio-temporal topological relations. The framework supports reasoning based on the temporal granularity of space time datasets as well as their temporal topology. It was designed in conjunction with the PyGRASS [3] library to support parallel processing of large datasets, that has a long tradition in GRASS GIS [4,5]. We will present a subset of more than 40 temporal modules that were implemented based on the GRASS GIS Temporal Framework, PyGRASS and the GRASS GIS Python scripting library. These modules provide a comprehensive temporal GIS tool set. The functionality range from space time dataset and time stamped map layer management

Real Time Integration of Field Data Into a GIS Platform for the Management of Hydrological Emergencies

Science.gov (United States)

Mangiameli, M.; Mussumeci, G.

2013-01-01

A wide series of events requires immediate availability of information and field data to be provided to decision-makers. An example is the necessity of quickly transferring the information acquired from monitoring and alerting sensors or the data of the reconnaissance of damage after a disastrous event to an Emergency Operations Center. To this purpose, we developed an integrated GIS and WebGIS system to dynamically create and populate via Web a database with spatial features. In particular, this work concerns the gathering and transmission of spatial data and related information to the desktop GIS so that they can be displayed and analyzed in real time to characterize the operational scenario and to decide the rescue interventions. As basic software, we used only free and open source: QuantumGIS and Grass as Desktop GIS, Map Server with PMapper application for the Web-Gis functionality and PostGreSQL/PostGIS as Data Base Management System (DBMS). The approach has been designed, developed and successfully tested in the management of GIS-based navigation of an autonomous robot, both to map its trajectories and to assign optimal paths. This paper presents the application of our system to a simulated hydrological event that could interest the province of Catania, in Sicily. In particular, assuming that more teams draw up an inventory of the damage, we highlight the benefits of real-time transmission of the information collected from the field to headquarters.

REAL TIME INTEGRATION OF FIELD DATA INTO A GIS PLATFORM FOR THE MANAGEMENT OF HYDROLOGICAL EMERGENCIES

Directory of Open Access Journals (Sweden)

M. Mangiameli

2014-01-01

Full Text Available A wide series of events requires immediate availability of information and field data to be provided to decision-makers. An example is the necessity of quickly transferring the information acquired from monitoring and alerting sensors or the data of the reconnaissance of damage after a disastrous event to an Emergency Operations Center. To this purpose, we developed an integrated GIS and WebGIS system to dynamically create and populate via Web a database with spatial features. In particular, this work concerns the gathering and transmission of spatial data and related information to the desktop GIS so that they can be displayed and analyzed in real time to characterize the operational scenario and to decide the rescue interventions. As basic software, we used only free and open source: QuantumGIS and Grass as Desktop GIS, Map Server with PMapper application for the Web-Gis functionality and PostGreSQL/PostGIS as Data Base Management System (DBMS. The approach has been designed, developed and successfully tested in the management of GIS-based navigation of an autonomous robot, both to map its trajectories and to assign optimal paths. This paper presents the application of our system to a simulated hydrological event that could interest the province of Catania, in Sicily. In particular, assuming that more teams draw up an inventory of the damage, we highlight the benefits of real-time transmission of the information collected from the field to headquarters.

Design of nuclear emergency decision-making support system based on the results of radiation monitoring

International Nuclear Information System (INIS)

Zheng Qiyan; Zhang Lijun; Huang Weiqi; Chen Lin

2010-01-01

For nuclear emergency decision-making support system based on the results of radiation monitoring, its main assignment is receiving radiation monitoring data and analyzing them, to accomplish some works such as environment influence evaluation, dose assessment for emergency responder, decision-making analyzing and effectiveness evaluation for emergency actions, etc.. This system is made up of server, communication terminal, data-analyzing terminal, GPRS modules, printer, and so on. The whole system make of a LAN. The system's software is made up of six subsystems: data-analyzing subsystem, reporting subsystem, GIS subsystem, communication subsystem, user-managing subsystem and data-base. (authors)

The application of VR-GIS to decommissioning decision support system (DDSS) of nuclear reactor

International Nuclear Information System (INIS)

Zhu Bo

2005-01-01

Advanced management technique and Decision Support System (DSS) are needed to solve the problems of the nuclear reactor decommissioning decision-making. In this study, a kind of new DSS technique for nuclear reactor decommissioning is introduced. It is based on the Virtual Reality (VR) and Geography Information System (GIS), which combine with the scientific management method, operational research, cybernetics and behavior science. The proposed DDSS (Decommissioning Decision Support System) can provide decision-maker the real time 3-D virtual Environment, GIS information and background material of the decommissioning reactor, help to ascertain the decision-making target, modify the decision module and optimize the dismantling plan. The data from three modules (VR Environment Module, VR-DOSE Management Module and Route Layout GIS Module) are used to continuously update and show the statistic at the same time, and the final advice will be given to decision-maker. (authors)

Establishing Esri ArcGIS Enterprise Platform Capabilities to Support Response Activities of the NASA Earth Science Disasters Program

Science.gov (United States)

Molthan, A.; Seepersad, J.; Shute, J.; Carriere, L.; Duffy, D.; Tisdale, B.; Kirschbaum, D.; Green, D. S.; Schwizer, L.

2017-12-01

NASA's Earth Science Disasters Program promotes the use of Earth observations to improve the prediction of, preparation for, response to, and recovery from natural and technological disasters. NASA Earth observations and those of domestic and international partners are combined with in situ observations and models by NASA scientists and partners to develop products supporting disaster mitigation, response, and recovery activities among several end-user partners. These products are accompanied by training to ensure proper integration and use of these materials in their organizations. Many products are integrated along with other observations available from other sources in GIS-capable formats to improve situational awareness and response efforts before, during and after a disaster. Large volumes of NASA observations support the generation of disaster response products by NASA field center scientists, partners in academia, and other institutions. For example, a prediction of high streamflows and inundation from a NASA-supported model may provide spatial detail of flood extent that can be combined with GIS information on population density, infrastructure, and land value to facilitate a prediction of who will be affected, and the economic impact. To facilitate the sharing of these outputs in a common framework that can be easily ingested by downstream partners, the NASA Earth Science Disasters Program partnered with Esri and the NASA Center for Climate Simulation (NCCS) to establish a suite of Esri/ArcGIS services to support the dissemination of routine and event-specific products to end users. This capability has been demonstrated to key partners including the Federal Emergency Management Agency using a case-study example of Hurricane Matthew, and will also help to support future domestic and international disaster events. The Earth Science Disasters Program has also established a longer-term vision to leverage scientists' expertise in the development and delivery of

Estimating hurricane hazards using a GIS system

Directory of Open Access Journals (Sweden)

A. Taramelli

2008-08-01

Full Text Available This paper develops a GIS-based integrated approach to the Multi-Hazard model method, with reference to hurricanes. This approach has three components: data integration, hazard assessment and score calculation to estimate elements at risk such as affected area and affected population. First, spatial data integration issues within a GIS environment, such as geographical scales and data models, are addressed. Particularly, the integration of physical parameters and population data is achieved linking remotely sensed data with a high resolution population distribution in GIS. In order to assess the number of affected people, involving heterogeneous data sources, the selection of spatial analysis units is basic. Second, specific multi-hazard tasks, such as hazard behaviour simulation and elements at risk assessment, are composed in order to understand complex hazard and provide support for decision making. Finally, the paper concludes that the integrated approach herein presented can be used to assist emergency management of hurricane consequences, in theory and in practice.

A GIS-based decision support system for regional eco-security assessment and its application on the Tibetan Plateau.

Science.gov (United States)

Xiaodan, Wang; Xianghao, Zhong; Pan, Gao

2010-10-01

Regional eco-security assessment is an intricate, challenging task. In previous studies, the integration of eco-environmental models and geographical information systems (GIS) usually takes two approaches: loose coupling and tight coupling. However, the present study used a full coupling approach to develop a GIS-based regional eco-security assessment decision support system (ESDSS). This was achieved by merging the pressure-state-response (PSR) model and the analytic hierarchy process (AHP) into ArcGIS 9 as a dynamic link library (DLL) using ArcObjects in ArcGIS and Visual Basic for Applications. Such an approach makes it easy to capitalize on the GIS visualization and spatial analysis functions, thereby significantly supporting the dynamic estimation of regional eco-security. A case study is presented for the Tibetan Plateau, known as the world's "third pole" after the Arctic and Antarctic. Results verified the usefulness and feasibility of the developed method. As a useful tool, the ESDSS can also help local managers to make scientifically-based and effective decisions about Tibetan eco-environmental protection and land use. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

From urban planning and emergency training to Pokémon Go: applications of virtual reality GIS (VRGIS) and augmented reality GIS (ARGIS) in personal, public and environmental health.

Science.gov (United States)

Kamel Boulos, Maged N; Lu, Zhihan; Guerrero, Paul; Jennett, Charlene; Steed, Anthony

2017-02-20

The latest generation of virtual and mixed reality hardware has rekindled interest in virtual reality GIS (VRGIS) and augmented reality GIS (ARGIS) applications in health, and opened up new and exciting opportunities and possibilities for using these technologies in the personal and public health arenas. From smart urban planning and emergency training to Pokémon Go, this article offers a snapshot of some of the most remarkable VRGIS and ARGIS solutions for tackling public and environmental health problems, and bringing about safer and healthier living options to individuals and communities. The article also covers the main technical foundations and issues underpinning these solutions.

From urban planning and emergency training to Pokémon Go: applications of virtual reality GIS (VRGIS and augmented reality GIS (ARGIS in personal, public and environmental health

Directory of Open Access Journals (Sweden)

Maged N. Kamel Boulos

2017-02-01

Full Text Available Abstract The latest generation of virtual and mixed reality hardware has rekindled interest in virtual reality GIS (VRGIS and augmented reality GIS (ARGIS applications in health, and opened up new and exciting opportunities and possibilities for using these technologies in the personal and public health arenas. From smart urban planning and emergency training to Pokémon Go, this article offers a snapshot of some of the most remarkable VRGIS and ARGIS solutions for tackling public and environmental health problems, and bringing about safer and healthier living options to individuals and communities. The article also covers the main technical foundations and issues underpinning these solutions.

Remote sensing and GIS analyses for emergency manouvering and forced landing areas definition as a support for general aviation flights

Science.gov (United States)

Skocki, Krzysztof

2016-08-01

This paper summarizes the preliminary analyses of using existing remote sensing data, medium and high-resolution satellite and airborne data to define safe emergency landing and maneuvering areas to be used by small aircrafts operating from small airports and airfields in Poland. The pilots need to know such places in the interest of safe flight operations. In common practice, flying instructors typically show the student pilot fields around the airfield supposed to be suitable for emergency or precautionary landing (or ditching) in the initial phase of the training. Although it looks to cover the most basic needs, the problem still exists in relation to guest pilots. To fill this gap, the unified safety map document covering the safe emergency areas around the airfields is proposed in this research. Use of satellite high resolution data, as well as aerial photos, infrastructure information, with use of GIS tools (like buffer zones, distance, equal-time circles or position lines) enable to check the terrain around selected airfields and define possible areas suitable for emergency operations. In the second phase of work, selected areas will be described in terms of easy navigation, possible infrastructure around them, rescue possibilities, radio signal coverage, and others. The selected areas should be also checked for typical cover and surface hardness and stability (eg. with use of moisture estimation on the base of middle-resolution satellite data). Its planned to prepare one combined and separate sheets of the final map for various aircraft characteristics (`classes' of small Cessna-related, big Cessna-related, fast low-wing Diamond-like, two-engine Piper-like). The presented concept should highly increase the safety operations for small aviation in secondary airports and airfields, where the information available is limited. There is also a possibility to make a similar maps for `cruise', which means the areas with dense traffic between the airports/airfields.

HiGIS: An Open Framework for High Performance Geographic Information System

Directory of Open Access Journals (Sweden)

XIONG, W.

2015-08-01

Full Text Available Big data era expose many challenges to geospatial data management, geocomputation and cartography. There is no exception in geographic information systems (GIS community. Technologies and facilities of high performance computing (HPC become more and more feasible to researchers, while mobile computing, ubiquitous computing, and cloud computing are emerging. But traditional GIS need to be improved to take advantages of all these evolutions. We proposed and implemented a GIS married with high performance computing, which is called HiGIS. The goal of HiGIS is to promote the performance of geocomputation by leveraging the power of HPC, and to build an open framework for geospatial data storing, processing, displaying and sharing. In this paper the architecture, data model and modules of the HiGIS system are introduced. A geocomputation scheduling engine based on communicating sequential process was designed to exploit spatial analysis and processing. Parallel I/O strategy using file view was proposed to improve the performance of geospatial raster data access. In order to support web-based online mapping, an interactive cartographic script was provided to represent a map. A demostration of locating house was used to manifest the characteristics of HiGIS. Parallel and concurrency performance experiments show the feasibility of this system.

FEMA's Earthquake Incident Journal: A Web-Based Data Integration and Decision Support Tool for Emergency Management

Science.gov (United States)

Jones, M.; Pitts, R.

2017-12-01

For emergency managers, government officials, and others who must respond to rapidly changing natural disasters, timely access to detailed information related to affected terrain, population and infrastructure is critical for planning, response and recovery operations. Accessing, analyzing and disseminating such disparate information in near real-time are critical decision support components. However, finding a way to handle a variety of informative yet complex datasets poses a challenge when preparing for and responding to disasters. Here, we discuss the implementation of a web-based data integration and decision support tool for earthquakes developed by the Federal Emergency Management Agency (FEMA) as a solution to some of these challenges. While earthquakes are among the most well- monitored and measured of natural hazards, the spatially broad impacts of shaking, ground deformation, landslides, liquefaction, and even tsunamis, are extremely difficult to quantify without accelerated access to data, modeling, and analytics. This web-based application, deemed the "Earthquake Incident Journal", provides real-time access to authoritative and event-specific data from external (e.g. US Geological Survey, NASA, state and local governments, etc.) and internal (FEMA) data sources. The journal includes a GIS-based model for exposure analytics, allowing FEMA to assess the severity of an event, estimate impacts to structures and population in near real-time, and then apply planning factors to exposure estimates to answer questions such as: What geographic areas are impacted? Will federal support be needed? What resources are needed to support survivors? And which infrastructure elements or essential facilities are threatened? This presentation reviews the development of the Earthquake Incident Journal, detailing the data integration solutions, the methodology behind the GIS-based automated exposure model, and the planning factors as well as other analytical advances that

When Informationists Get Involved: the CHICA-GIS Project.

Science.gov (United States)

Whipple, Elizabeth C; Odell, Jere D; Ralston, Rick K; Liu, Gilbert C

2013-01-01

Child Health Improvement through Computer Automation (CHICA) is a computer decision support system (CDSS) that interfaces with existing electronic medical record systems (EMRS) and delivers "just-in-time" patient-relevant guidelines to physicians during the clinical encounter and accurately captures structured data from all who interact with the system. "Delivering Geospatial Intelligence to Health Care Professionals (CHICA-GIS)" (1R01LM010923-01) expands the medical application of Geographic Information Systems (GIS) by integrating a geographic information system with CHICA. To provide knowledge management support for CHICA-GIS, three informationists at the Indiana University School of Medicine were awarded a supplement from the National Library Medicine. The informationists will enhance CHICA-GIS by: improving the accuracy and accessibility of information, managing and mapping the knowledge which undergirds the CHICA-GIS decision support tool, supporting community engagement and consumer health information outreach, and facilitating the dissemination of new CHICA-GIS research results and services.

WEB-GIS Decision Support System for CO2 storage

Science.gov (United States)

Gaitanaru, Dragos; Leonard, Anghel; Radu Gogu, Constantin; Le Guen, Yvi; Scradeanu, Daniel; Pagnejer, Mihaela

2013-04-01

Environmental decision support systems (DSS) paradigm evolves and changes as more knowledge and technology become available to the environmental community. Geographic Information Systems (GIS) can be used to extract, assess and disseminate some types of information, which are otherwise difficult to access by traditional methods. In the same time, with the help of the Internet and accompanying tools, creating and publishing online interactive maps has become easier and rich with options. The Decision Support System (MDSS) developed for the MUSTANG (A MUltiple Space and Time scale Approach for the quaNtification of deep saline formations for CO2 storaGe) project is a user friendly web based application that uses the GIS capabilities. MDSS can be exploited by the experts for CO2 injection and storage in deep saline aquifers. The main objective of the MDSS is to help the experts to take decisions based large structured types of data and information. In order to achieve this objective the MDSS has a geospatial objected-orientated database structure for a wide variety of data and information. The entire application is based on several principles leading to a series of capabilities and specific characteristics: (i) Open-Source - the entire platform (MDSS) is based on open-source technologies - (1) database engine, (2) application server, (3) geospatial server, (4) user interfaces, (5) add-ons, etc. (ii) Multiple database connections - MDSS is capable to connect to different databases that are located on different server machines. (iii)Desktop user experience - MDSS architecture and design follows the structure of a desktop software. (iv)Communication - the server side and the desktop are bound together by series functions that allows the user to upload, use, modify and download data within the application. The architecture of the system involves one database and a modular application composed by: (1) a visualization module, (2) an analysis module, (3) a guidelines module

Technical support and emergency centre

International Nuclear Information System (INIS)

Bohun, L.; Kapisovsk y, M.

1997-01-01

This paper presents technical support and emergency management center which will be on two places: Mochovce NPP Emergency Centre (Technical support center and Support working center) and Reserve Emergency Centre in Levice (Reserve emergency center and Environmental Evaluation Center). The main aims of the emergency management centers are: the management and coordination of all persons and organisations; provision of the all information needed to evaluation of the accident and its mitigation; continuous evaluation of the potential or real radiological consequences; taking measure for an early notification of the governmental bodies and the organizations, warning and protection of the public; and other aims. In the next part the data for technical support and emergency centre are discussed

Support time-dependent transformations for surveying and GIS : current status and upcoming challenges

Science.gov (United States)

Mahmoudabadi, H.; Lercier, D.; Vielliard, S.; Mein, N.; Briggs, G.

2016-12-01

The support of time-dependent transformations for surveying and GIS is becoming a critical issue. We need to convert positions from the realizations of the International Terrestrial Reference Frame to any national reference frame. This problem is easy to solve when all of the required information is available. But it becomes really complicated in a worldwide context. We propose an overview of the current ITRF-aligned reference frames and we describe a global solution to support time-dependent transformations between them and the International Terrestrial Reference Frame. We focus on the uncertainties of station velocities used. In a first approximation, we use a global tectonic plate model to calculate point velocities. We show the impact of the velocity model on the coordinate accuracies. Several countries, particularly in active regions, are developing semi-dynamic reference frames. These frames include local displacement models updated regularly and/or after major events (such as earthquakes). Their integration into surveying or GIS applications is an upcoming challenge. We want to encourage the geodetic community to develop and use standard formats.

GIS-based spatial decision support system for grain logistics management

Science.gov (United States)

Zhen, Tong; Ge, Hongyi; Jiang, Yuying; Che, Yi

2010-07-01

Grain logistics is the important component of the social logistics, which can be attributed to frequent circulation and the great quantity. At present time, there is no modern grain logistics distribution management system, and the logistics cost is the high. Geographic Information Systems (GIS) have been widely used for spatial data manipulation and model operations and provide effective decision support through its spatial database management capabilities and cartographic visualization. In the present paper, a spatial decision support system (SDSS) is proposed to support policy makers and to reduce the cost of grain logistics. The system is composed of two major components: grain logistics goods tracking model and vehicle routing problem optimization model and also allows incorporation of data coming from external sources. The proposed system is an effective tool to manage grain logistics in order to increase the speed of grain logistics and reduce the grain circulation cost.

Integrating GIS components with knowledge discovery technology for environmental health decision support.

Science.gov (United States)

Bédard, Yvan; Gosselin, Pierre; Rivest, Sonia; Proulx, Marie-Josée; Nadeau, Martin; Lebel, Germain; Gagnon, Marie-France

2003-04-01

This paper presents a new category of decision-support tools that builds on today's Geographic Information Systems (GIS) and On-Line Analytical Processing (OLAP) technologies to facilitate Geographic Knowledge Discovery (GKD). This new category, named Spatial OLAP (SOLAP), has been an R&D topic for about 5 years in a few university labs and is now being implemented by early adopters in different fields, including public health where it provides numerous advantages. In this paper, we present an example of a SOLAP application in the field of environmental health: the ICEM-SE project. After having presented this example, we describe the design of this system and explain how it provides fast and easy access to the detailed and aggregated data that are needed for GKD and decision-making in public health. The SOLAP concept is also described and a comparison is made with traditional GIS applications.

Application of GIS in foreign direct investment decision support system

Science.gov (United States)

Zhou, Jianlan; Sun, Koumei

2007-06-01

It is important to make decisions on how to attract foreign direct investment (FDI) to China and know how the inequality of FDI introduction by locational different provinces. Following background descriptions on China's FDI economic environments and FDI-related policies, this paper demonstrates the uses of geographical information system (GIS) and multi-criterion decision-making (MCDM) framework in solving a spatial multi-objective problem of evaluating and ranking China's provinces for FDI introduction. It implements a foreign direct investment decision support system, which reveals the main determinants of FDI in China and gives some results of regional geographical analysis over spatial data.

Assessment of bioenergy potential in Sicily: A GIS-based support methodology

International Nuclear Information System (INIS)

Beccali, Marco; D'Alberti, Vincenzo; Franzitta, Vincenzo; Columba, Pietro

2009-01-01

A Geographical Information System (GIS) supported methodology has been developed in order to assess the technical and economic potential of biomass exploitation for energy production in Sicily. The methodology was based on the use of agricultural, economic, climatic, and infrastructural data in a GIS. Data about land use, transportation facilities, urban cartography, regional territorial planning, terrain digital model, lithology, climatic types, and civil and industrial users have been stored in the GIS to define potential areas for gathering the residues coming from the pruning of olive groves, vineyards, and other agricultural crops, and to assess biomass available for energy cultivation. Further, it was possible to assess the potential of biodiesel production, supposing the cultivation of rapeseed in arable crop areas. For the biomass used for direct combustion purposes, the economic availability has been assessed assuming a price of the biomass and comparing it with other fuels. This assessment has shown the strong competitiveness of firewood in comparison with traditional fossil fuels when the collection system is implemented in an efficient way. Moreover, the economic potential of biodiesel was assessed considering the on-going financial regime for fuel. At the same time, the study has shown a significant competitiveness of the finished biomass (pellets), and good potential for a long-term development of this market. An important result was the determination of biofuel production potential in Sicily. An outcome of the study was to show the opportunities stemming from the harmonisation of Energy Policy with the Waste Management System and Rural Development Plan. (author)

Application of a geographic information system for radiologic emergency response

International Nuclear Information System (INIS)

Best, R.G.; Doyle, J.F.

1995-01-01

A geographic information system (GIS) is a multifunctional analytical tool that can be used to compile available data and derive information. A GIS is a computerized database management system for the capture, storage, retrieval, analysis, and display of spatial data. Maps are the most common type of spatial data, but any type of data that can be referenced by an x-y location or geographic coordinate can be used in a GIS. In a radiological emergency, it is critical that data of all types be rapidly compiled into a common format in order to make accurate observations and informed decisions. Developing a baseline GIS for nuclear facilities would offer a significant incentive for all organizations to contribute to and utilize this powerful data management tool. The system being developed could integrate all elements of emergency planning, from the initial protective actions based on models through the emergency monitoring phase, and finally ending with the complex reentry and recovery phase. Within the Federal Radiological Monitoring and Assessment Center (FRMAC), there is a continuing effort to improve the data management and communication process. To demonstrate the potential of GIS for emergency response, the system has been utilized in interagency FRMAC exercises. An interactive GIS system has been deployed and used to analyze the available spatial data to help determine the impact of a hypothetical radiological release and to develop mitigation plans. For this application, both hardcopy and real-time spatial displays were generated with the GIS. Composite maps with different sizes, scales, and themes were produced to support the exercises

GIS/FIS development for the SSC

International Nuclear Information System (INIS)

Oslin, A.; Butalla, M.

1992-01-01

Facility management for a project of the size and complexity of the SSCL is a challenging task. The Facility Information System/Geographic Information System (FIS/GIS) should provide an effective tool for the demanding work ahead. Both the FIS and GIS encompass information that many potential users across multiple disciplines will require for effective facility management. FIS will be integrated with the GIS for applications that involve duplicate needs of graphic and attribute data. In particular, infrastructure networks, environmental monitoring, emergency dispatching, and hazardous materials management have been identified as areas where the two systems will interface. In general, the GIS will manage graphic and attribute information outside the actual structure of the SSCL. The FIS will take over operation of components and networks within the SSCL facility. By providing a method for informed decision-making, implementation of the SSC FIS/GIS will facilitate the tasks involved in managing our Laboratory during all phases of its life

Use NASA GES DISC Data in ArcGIS

Science.gov (United States)

Yang, Wenli; Pham, Long B.; Kempler, Steve

2015-01-01

This presentation describes GIS relevant data at NASA Goddard Earth Sciences Data and Information Services Center (GES DISC), GES DISC Services and Support for GIS Users, and use cases of GES DISC data in ArcGIS.

Using Geographical Information Systems (GIS) as an instrument of water resource management: a case study from a GIS-based Water Safety Plan in Germany.

Science.gov (United States)

Wienand, I; Nolting, U; Kistemann, T

2009-01-01

Following international developments and the new WHO Drinking Water Guidelines (WHO 2004) a process-orientated concept for risk, monitoring and incident management has been developed and implemented in this study. The concept will be reviewed with special consideration for resource protection (first barrier of the multi-barrier system) and in turn, for the Water Safety Plan (WSP) which adequately considers-beyond the current framework of legal requirements-possible new hygienic-microbiologically relevant risks (especially emerging pathogens) for the drinking water supply. The development of a WSP within the framework of risk, monitoring and incident management includes the application of Geographical Information Systems (GIS). In the present study, GIS was used for visualization and spatial analysis in decisive steps in the WSP. The detailed process of GIS-supported implementation included the identification of local participants and their tasks and interactions as an essential part of risk management. A detailed ecological investigation of drinking water conditions in the catchment area was conducted in addition to hazard identification, risk assessment and the monitoring of control measures. The main task of our study was to find out in which steps of the WSP the implementation of GIS could be integrated as a useful, and perhaps even an essential tool.

Developing a middleware to support HDF data access in ArcGIS

Science.gov (United States)

Sun, M.; Jiang, Y.; Yang, C. P.

2014-12-01

Hierarchical Data Format (HDF) is the standard data format for the NASA Earth Observing System (EOS) data products, like the MODIS level-3 data. These data have been widely used in long-term study of the land surface, biosphere, atmosphere, and oceans of the Earth. Several toolkits have been developed to access HDF data, such as the HDF viewer and Geospatial Data Abstraction Library (GDAL), etc. ArcGIS integrated the GDAL providing data user a Graphical User Interface (GUI) to read HDF data. However, there are still some problems when using the toolkits:for example, 1) the projection information is not recognized correctly, 2) the image is dispalyed inverted, and 3) the tool lacks of capability to read the third dimension information stored in the data subsets, etc. Accordingly, in this study we attempt to improve the current HDF toolkits to address the aformentioned issues. Considering the wide-usage of ArcGIS, we develop a middleware for ArcGIS based on GDAL to solve the particular data access problems happening in ArcGIS, so that data users can access HDF data successfully and perform further data analysis with the ArcGIS geoprocessing tools.

GIS and radiological crisis management

International Nuclear Information System (INIS)

Kacenelen, Y.

2009-01-01

The author reports a new operational exercise performed on September 17, 2009 on the CEA Saclay site. For this purpose, the CEA (the French Atomic Energy Commission) developed M2IRAGE, a tool based on ArcGIS 9.3 technologies. This tool allows an easier data collection and exploitation in order to quickly map the distribution of radioactive particles and thus help the management of the health response and emergency organization within two hours after the warning. This tool notably uses a geographic information system (GIS)

GIS-Based emergency and evacuation planning for volcanic hazards in New Zealand

DEFF Research Database (Denmark)

Cole, J. W.; Sabel, C. E.; Blumenthal, E.

2005-01-01

(reduction, readiness, response and recovery) can benefit from CIS, including applications related to transportation systems, a critical element in managing effective lifelines in an emergency. This is particularly true immediately before and during a volcanic eruption. The potential for volcanic activity...... in New Zealand is high, with 10 volcanoes or volcanic centres (Auckland, Bay of Islands, Haroharo, Mayor Island, Ruapehu, Taranaki, Tarawera, Taupo, Tongariro (including Ngauruhoe) and White Island) recognised as active or potentially active. In addition there are many active and potentially active...... volcanoes along the Kermadec Island chain. There is a great deal of background information on all of these volcanoes, and GIS is currently being used for some aspects of monitoring (e.g. ERS and Envisat radar interferometry for observing deformation prior to eruptions). If an eruption is considered imminent...

What is exciting at the libraries? – GIS resources at Libraries

OpenAIRE

Kong, Nicole

2017-01-01

This presentation introduce the new GIS resources offered from Purdue University Libraries. These new support areas include the D-VELoP GIS computing lab, new Esri Development Center (EDC), GIS data portal, GIS data server, Insights for ArcGIS, and GIS VR technology.

Development and Application of a Planning Support System for Regional Spatial Functional Zoning Based on GIS

Directory of Open Access Journals (Sweden)

Xiaorui Zhang

2016-09-01

Full Text Available Regional spatial functional zoning in China is a large-scale strategic planning and requires very advanced planning decision support technology. With respect to spatial functional zoning, the planning support system (PSS is introduced as one of the most popular computer aided planning systems at the present time in this paper, and is further explained with the example of the latest regional main functional area (RMFA planning in China. On the Visual Studio.NET visualization development platform, the planning decision model, planning decision method, and GIS are organically integrated and customized by using the component-type secondary development technology of the ArcGIS Engine with the development language VB.NET. Hence, a highly efficient and flexible planning support system of regional main functional areas (RMFA-PSS is established. It was adopted in the research of the Beijing–Tianjin area in China and accordingly two types of main functional area planning are acquired. The RMFA-PSS offers an efficient and flexible decision support with regard to RMFA planning. The research can provide a reference for further PSS development and applications related to other types of spatial functional zoning.

A WebGIS Decision Support System for Management of Abandoned Mines

Directory of Open Access Journals (Sweden)

Ranka Stanković

2016-07-01

Full Text Available This paper presents the development of a WebGIS application aimed at providing safe and reliable data needed for reclamation of abandoned mines in national parks and other protected areas in Vojvodina in compliance with existing legal regulations. The geodatabase model for this application has been developed using UML and the CASE tool Microsoft Visio featuring an interface with ArcGIS. The WebGIS application was developed using GeoServer, an open source tool in the Java programming language, with integrated PostgreSQL DB and the possibility of generating and publishing WMS, WFS and KML services. The WebGIS application is publicly available, based on an appropriate central database, which for the first time encompasses all available data on abandoned mines in Vojvodina, and as such may serve as a model for similar databases on the territory of the Republic of Serbia.

Analytical tools and functions of GIS in the process control and decision support of mining company

Directory of Open Access Journals (Sweden)

Semrád Peter

2001-12-01

Full Text Available The development of computer techniques, the increase in demands for the professional and possible fastest data processing, as well as for the fluency and efficiency of information gaining, exchanging and providing has a strong influence on forming the new generation of information technologies - Geografic Information Systems (GIS that rose in the second half of the twentieth century.Advancement in this area is still progressing and GIS gradually find the enforcement in individual fields where they play a great role in the process control and decision support. Nowadays, there are applications in mining and geology, where are used especially at processing and evaluating of mining - geological documentation, optimalization of mining and technical processes, planning, distributing and managing of mining as well as economic analysis that are important in terms of investment decisions to mining business.GIS are the systems for the effective keeping, updating, processing, analysing, modelling, simulating and presenting geographically oriented information. We can identify them as computer systems helping to solve real problems that should be normally required to solve by human expert.Well equipped GIS have graphic ability and accordingly manage descriptive (attribute data. They are able to secure mutual connection between graphical and descriptive data and in addition to command countless number of functions that enable the execution of spatial analysis. This fact is very important in mining and geological application.There are exploited mostly geostatistical analysis (e. g. modelling of distribution valuable and harmful components of mineral resouce in a mineral deposit, surface modelling and surface model analysis (e. g. at modelling the subsidence of mining territory, different methods of creating spatial and attribute queries about database for seeking necessary data (e. g. to find all mining blocks of deposit that meet required conditions and to

Study on Global GIS architecture and its key technologies

Science.gov (United States)

Cheng, Chengqi; Guan, Li; Lv, Xuefeng

2010-11-01

Global GIS (G2IS) is a system, which supports the huge data process and the global direct manipulation on global grid based on spheroid or ellipsoid surface. Based on global subdivision grid (GSG), Global GIS architecture is presented in this paper, taking advantage of computer cluster theory, the space-time integration technology and the virtual reality technology. Global GIS system architecture is composed of five layers, including data storage layer, data representation layer, network and cluster layer, data management layer and data application layer. Thereinto, it is designed that functions of four-level protocol framework and three-layer data management pattern of Global GIS based on organization, management and publication of spatial information in this architecture. Three kinds of core supportive technologies, which are computer cluster theory, the space-time integration technology and the virtual reality technology, and its application pattern in the Global GIS are introduced in detail. The primary ideas of Global GIS in this paper will be an important development tendency of GIS.

Decision support for emergency management

International Nuclear Information System (INIS)

Andersen, V.

1989-05-01

A short introduction will be given to the Nordic project ''NKA/INF: Information Technology for Accident and Emergency Management'', which is now in its final phase. To perform evaluation of the project, special scenarious have been developed, and experiments based on these will be fulfilled and compared with experiments without use of the decision support system. Furthermore, the succeeding European project, ''IT Support for Emergency Management - ISEM'', with the purpose of developing a decision support system for complex and distributed decision making in emergency management in full scale, will be described and the preliminary conceptual model for the system will be presented. (author)

Landslide Catastrophes and Disaster Risk Reduction: A GIS Framework for Landslide Prevention and Management

Directory of Open Access Journals (Sweden)

Xin Wang

2010-09-01

Full Text Available As catastrophic phenomena, landslides often cause large-scale socio-economic destruction including loss of life, economic collapse, and human injury. In addition, landslides can impair the functioning of critical infrastructure and destroy cultural heritage and ecological systems. In order to build a more landslide resistant and resilient society, an original GIS-based decision support system is put forth in order to help emergency managers better prepare for and respond to landslide disasters. The GIS-based landslide monitoring and management system includes a Central Repository System (CRS, Disaster Data Processing Modules (DDPM, a Command and Control System (CCS and a Portal Management System (PMS. This architecture provides valuable insights into landslide early warning, landslide risk and vulnerability analyses, and critical infrastructure damage assessments. Finally, internet-based communications are used to support landslide disaster modelling, monitoring and management.

Developing AN Emergency Response Model for Offshore Oil Spill Disaster Management Using Spatial Decision Support System (sdss)

Science.gov (United States)

Balogun, Abdul-Lateef; Matori, Abdul-Nasir; Wong Toh Kiak, Kelvin

2018-04-01

Environmental resources face severe risks during offshore oil spill disasters and Geographic Information System (GIS) Environmental Sensitivity Index (ESI) maps are increasingly being used as response tools to minimize the huge impacts of these spills. However, ESI maps are generally unable to independently harmonize the diverse preferences of the multiple stakeholders' involved in the response process, causing rancour and delay in response time. This paper's Spatial Decision Support System (SDSS) utilizes the Analytic Hierarchy Process (AHP) model to perform tradeoffs in determining the most significant resources to be secured considering the limited resources and time available to perform the response operation. The AHP approach is used to aggregate the diverse preferences of the stakeholders and reach a consensus. These preferences, represented as priority weights, are incorporated in a GIS platform to generate Environmental sensitivity risk (ESR) maps. The ESR maps provide a common operational platform and consistent situational awareness for the multiple parties involved in the emergency response operation thereby minimizing discord among the response teams and saving the most valuable resources.

DESIGN AND IMPLEMENTATION OF DYNAMIC SYMBOLS IN DYNAMIC GIS

Institute of Scientific and Technical Information of China (English)

无

2001-01-01

Many Internet-GIS have been implemented on the web and they are increasingly bec oming an important part of multimedia cartography that has much more users as co mpared to traditional GIS production media.Internet GIS technology has provided the GIS dynamic information acquisition w ith technical support.Also,the visualization technology of electronic map ha s provided tools for GIS symbols with dynamic characteristics.On the basis of GI S dynamic information acquisition,the design idea and implementation methods of dynamic symbols in dynamic GIS are presented in this article.

GIS-based assessment of landslide susceptibility using certainty ...

Indian Academy of Sciences (India)

tion systems (GIS) using different models. Many of these ... as spatial multicriteria decision analysis (MCDA) approach ... 2013), support vec- ... Landslide susceptibility assessment using mathematical methods in GIS, Qianyang China 1401.

Marine Waves Energy: A spatio-temporal DSS-WebGIS to support the wave-energy potential assessment in the Mediterranean Sea

International Nuclear Information System (INIS)

Pollino, Maurizio; La Porta, Luigi; Caiaffa, Emanuela

2015-01-01

GIS technologies are able to provide a useful tool for estimating the energy resource from the sea waves, assessing whether this energy flux is exploitable and evaluating the social and environmental impacts in deep water and/or in the seaboard. The DDS-WebGIS 'Energy Waves' represents a tool for displaying and sharing geo spatial data and maps, as well as a valuable support for new installations planning, forecasting system and existing infrastructure management. [it

Uses of GIS for Homeland Security and Emergency Management for Higher Education Institutions

Science.gov (United States)

Murchison, Stuart B.

2010-01-01

Geographic information systems (GIS) are a major component of the geospatial sciences, which are also composed of geostatistical analysis, remote sensing, and global positional satellite systems. These systems can be integrated into GIS for georeferencing, pattern analysis, visualization, and understanding spatial concepts that transcend…

Lagrangian modeling of atmospheric dispersion of radionuclides and geographical information systems as tools to support emergency planning in area of influence of nuclear complex of Angra dos Reis, RJ, Brazil

International Nuclear Information System (INIS)

Silva, Corbiniano

2013-01-01

Industrial accidents generally endanger structures and the set of environmental influence area where the enterprises are located, especially when affected by atmospheric dispersion of their pollutants, whose concern with the evacuation of the population is the main goal in emergency situations. Considering the nuclear complex Angra dos Reis - RJ, based on computer modeling analysis of the mechanisms of pollutant dispersion in conjunction with geographic information systems were developed. Thus, information about the dispersion of radionuclides - from simulations performed on the HYSPLIT; meteorological data (direction, intensity and calm on the wind regime and analysis of the wind field in the region using WRF), occurrence of landslides and data on the environmental study area were integrated into a GIS database using ArcGIS platform. Aiming at the identification and definition of escape routes in case of evacuation from accidental events in CNAAA, the results point solutions for long-term planning, based on weather and landslides, and short-term, supported by simulations of the dispersion radionuclides, in order to support actions that assist local emergency planning. (author)

Teaching Thousands with Cloud-based GIS

Science.gov (United States)

Gould, Michael; DiBiase, David; Beale, Linda

2016-04-01

Teaching Thousands with Cloud-based GIS Educators often draw a distinction between "teaching about GIS" and "teaching with GIS." Teaching about GIS involves helping students learn what GIS is, what it does, and how it works. On the other hand, teaching with GIS involves using the technology as a means to achieve education objectives in the sciences, social sciences, professional disciplines like engineering and planning, and even the humanities. The same distinction applies to CyberGIS. Understandably, early efforts to develop CyberGIS curricula and educational resources tend to be concerned primarily with CyberGIS itself. However, if CyberGIS becomes as functional, usable and scalable as it aspires to be, teaching with CyberGIS has the potential to enable large and diverse global audiences to perform spatial analysis using hosted data, mapping and analysis services all running in the cloud. Early examples of teaching tens of thousands of students across the globe with cloud-based GIS include the massive open online courses (MOOCs) offered by Penn State University and others, as well as the series of MOOCs more recently developed and offered by Esri. In each case, ArcGIS Online was used to help students achieve educational objectives in subjects like business, geodesign, geospatial intelligence, and spatial analysis, as well as mapping. Feedback from the more than 100,000 total student participants to date, as well as from the educators and staff who supported these offerings, suggest that online education with cloud-based GIS is scalable to very large audiences. Lessons learned from the course design, development, and delivery of these early examples may be useful in informing the continuing development of CyberGIS education. While MOOCs may have passed the peak of their "hype cycle" in higher education, the phenomenon they revealed persists: namely, a global mass market of educated young adults who turn to free online education to expand their horizons. The

BUILDING A GIS DATABASE FOR A TYPICAL URBAN SETTING v(A ...

African Journals Online (AJOL)

Ada

2009-08-28

Aug 28, 2009 ... REFERENCES. Anderson. D,, 1992. GIS Supports Garbage Hauler. Franchising. GIS World 5. (5): Longman. Group. ESRI, 1996. Introduction to ArcView GIS. An. ArcView User's manual by Environmental. Systems Research Institute (ESRI). Redlands CA, USA. ESRI, 1990. Understanding GIS – The Arc/Info.

Towards a gestural 3D interaction for tangible and three-dimensional GIS visualizations

Science.gov (United States)

Partsinevelos, Panagiotis; Agadakos, Ioannis; Pattakos, Nikolas; Maragakis, Michail

2014-05-01

and regions of interest while the GIS component responds accordingly by changing the scenario in a natural disaster application. Creating a 3D model representation of geospatial data provides a natural way for users to perceive and interact with space. To the best of our knowledge it is the first attempt to use Kinect II for GIS applications and generally virtual environments using novel Human Computer Interaction methods. Under a robust decision support system, the users are able to interact, combine and computationally analyze information in three dimensions using gestures. This study promotes geographic awareness and education and will prove beneficial for a wide range of geoscience applications including natural disaster and emergency management. Acknowledgements: This work is partially supported under the framework of the "Cooperation 2011" project ATLANTAS (11_SYN_6_1937) funded from the Operational Program "Competitiveness and Entrepreneurship" (co-funded by the European Regional Development Fund (ERDF)) and managed by the Greek General Secretariat for Research and Technology.

CyberGIS software: a synthetic review and integration roadmap

Energy Technology Data Exchange (ETDEWEB)

Wang, Shaowen [University of Illinois, Urbana-Champaign; Anselin, Luc [Arizona State University; Bhaduri, Budhendra L [ORNL; Cosby, Christopher [University Navstar Consortium, Boulder, CO; Goodchild, Michael [University of California, Santa Barbara; Liu, Yan [University of Illinois, Urbana-Champaign; Nygers, Timothy L. [University of Washington, Seattle

2013-01-01

CyberGIS defined as cyberinfrastructure-based geographic information systems (GIS) has emerged as a new generation of GIS representing an important research direction for both cyberinfrastructure and geographic information science. This study introduces a 5-year effort funded by the US National Science Foundation to advance the science and applications of CyberGIS, particularly for enabling the analysis of big spatial data, computationally intensive spatial analysis and modeling (SAM), and collaborative geospatial problem-solving and decision-making, simultaneously conducted by a large number of users. Several fundamental research questions are raised and addressed while a set of CyberGIS challenges and opportunities are identified from scientific perspectives. The study reviews several key CyberGIS software tools that are used to elucidate a vision and roadmap for CyberGIS software research. The roadmap focuses on software integration and synthesis of cyberinfrastructure, GIS, and SAM by defining several key integration dimensions and strategies. CyberGIS, based on this holistic integration roadmap, exhibits the following key characteristics: high-performance and scalable, open and distributed, collaborative, service-oriented, user-centric, and community-driven. As a major result of the roadmap, two key CyberGIS modalities gateway and toolkit combined with a community-driven and participatory approach have laid a solid foundation to achieve scientific breakthroughs across many geospatial communities that would be otherwise impossible.

a Real-Time GIS Platform for High Sour Gas Leakage Simulation, Evaluation and Visualization

Science.gov (United States)

Li, M.; Liu, H.; Yang, C.

2015-07-01

The development of high-sulfur gas fields, also known as sour gas field, is faced with a series of safety control and emergency management problems. The GIS-based emergency response system is placed high expectations under the consideration of high pressure, high content, complex terrain and highly density population in Sichuan Basin, southwest China. The most researches on high hydrogen sulphide gas dispersion simulation and evaluation are used for environmental impact assessment (EIA) or emergency preparedness planning. This paper introduces a real-time GIS platform for high-sulfur gas emergency response. Combining with real-time data from the leak detection systems and the meteorological monitoring stations, GIS platform provides the functions of simulating, evaluating and displaying of the different spatial-temporal toxic gas distribution patterns and evaluation results. This paper firstly proposes the architecture of Emergency Response/Management System, secondly explains EPA's Gaussian dispersion model CALPUFF simulation workflow under high complex terrain and real-time data, thirdly explains the emergency workflow and spatial analysis functions of computing the accident influencing areas, population and the optimal evacuation routes. Finally, a well blow scenarios is used for verify the system. The study shows that GIS platform which integrates the real-time data and CALPUFF models will be one of the essential operational platforms for high-sulfur gas fields emergency management.

UN OPEN GIS CAPACITY BUILDING

Directory of Open Access Journals (Sweden)

A. Albertella

2017-07-01

Full Text Available The UN Open GIS Initiative is to identify and develop, under UN guidance, an Open Source GIS bundle that meets the requirements of UN operations, taking full advantage of the expertise of mission partners (partner nations, technology contributing countries, international organizations, academia, NGO’s, private sector. The project, started in 2016, is composed by 4 working groups. One of the working group is specifically related to Capacity Building, given its importance for the success of the project. UN Open GIS will be based on some existing open source geospatial software (packages and libraries with many extensions specifically developed. The users of the platform will be the UN staff supporting with mapping and GIS the peacekeeping missions. Therefore, they are generally expert of this specific domain, even if they are currently using proprietary software. UN Open GIS Capacity Building is specifically thought for covering this gap, providing them the suitable background about open source geospatial software in general and the education tailored to the solution that has been being developed within the project itself.

Geographically application RFUE-WebGIS Rhineland-Palatinate/Saarland; RFUe-WebGIS Rheinland-Pfalz/Saarland. Geographisches Informationssystem (GIS) fuer den kerntechnischen Notfallschutz. Modulares Monitoring in statu nascendi

Energy Technology Data Exchange (ETDEWEB)

Lindenbeck, Christian; Kaiser, J. [in medias res, Freiburg/Breisgau (Germany); Amthauer, R.; Ren, Y.; Wilbois, Thomas [T-Systems GEI GmbH, Ulm (Germany); Mueller, B.; Seewald, C. [EES GmbH, Berlin (Germany); Fenn, H.; Hentzschel, R.; Maurer, M. [Ministerium fuer Wirtschaft, Klimaschutz, Energie und Landesplanung, Mainz (Germany)

2014-01-20

The geographically application RFUE-WebGIS integrates various FOSS (Free and Open Source Software) technologies to bring together the relevant data sources of the reactor remote monitoring (RFUE) in Rhineland-Palatinate and Saarland for the interests of the nuclear emergency response across national borders.

Integrated environmental decision support tool based on GIS technology

International Nuclear Information System (INIS)

Doctor, P.G.; O'Neil, T.K.; Sackschewsky, M.R.; Becker, J.M.; Rykiel, E.J.; Walters, T.B.; Brandt, C.A.; Hall, J.A.

1995-01-01

Environmental restoration and management decisions facing the US Department of Energy require balancing trade-offs between diverse land uses and impacts over multiple spatial and temporal scales. Many types of environmental data have been collected for the Hanford Site and the Columbia River in Washington State over the past fifty years. Pacific Northwest National Laboratory (PNNL) is integrating these data into a Geographic Information System (GIS) based computer decision support tool. This tool provides a comprehensive and concise description of the current environmental landscape that can be used to evaluate the ecological and monetary trade-offs between future land use, restoration and remediation options before action is taken. Ecological impacts evaluated include effects to individual species of concern and habitat loss and fragmentation. Monetary impacts include those associated with habitat mitigation. The tool is organized as both a browsing tool for educational purposes, and as a framework that leads a project manager through the steps needed to be in compliance with environmental requirements

Emerging role of Geographical Information System (GIS), Life Cycle Assessment (LCA) and spatial LCA (GIS-LCA) in sustainable bioenergy planning.

Science.gov (United States)

Hiloidhari, Moonmoon; Baruah, D C; Singh, Anoop; Kataki, Sampriti; Medhi, Kristina; Kumari, Shilpi; Ramachandra, T V; Jenkins, B M; Thakur, Indu Shekhar

2017-10-01

Sustainability of a bioenergy project depends on precise assessment of biomass resource, planning of cost-effective logistics and evaluation of possible environmental implications. In this context, this paper reviews the role and applications of geo-spatial tool such as Geographical Information System (GIS) for precise agro-residue resource assessment, biomass logistic and power plant design. Further, application of Life Cycle Assessment (LCA) in understanding the potential impact of agro-residue bioenergy generation on different ecosystem services has also been reviewed and limitations associated with LCA variability and uncertainty were discussed. Usefulness of integration of GIS into LCA (i.e. spatial LCA) to overcome the limitations of conventional LCA and to produce a holistic evaluation of the environmental benefits and concerns of bioenergy is also reviewed. Application of GIS, LCA and spatial LCA can help alleviate the challenges faced by ambitious bioenergy projects by addressing both economics and environmental goals. Copyright © 2017 Elsevier Ltd. All rights reserved.

A CLOUD-BASED PLATFORM SUPPORTING GEOSPATIAL COLLABORATION FOR GIS EDUCATION

Directory of Open Access Journals (Sweden)

X. Cheng

2015-05-01

Full Text Available GIS-related education needs support of geo-data and geospatial software. Although there are large amount of geographic information resources distributed on the web, the discovery, process and integration of these resources are still unsolved. Researchers and teachers always searched geo-data by common search engines but results were not satisfied. They also spent much money and energy on purchase and maintenance of various kinds of geospatial software. Aimed at these problems, a cloud-based geospatial collaboration platform called GeoSquare was designed and implemented. The platform serves as a geoportal encouraging geospatial data, information, and knowledge sharing through highly interactive and expressive graphic interfaces. Researchers and teachers can solve their problems effectively in this one-stop solution. Functions, specific design and implementation details are presented in this paper. Site of GeoSquare is: http://geosquare.tianditu.com/

a Cloud-Based Platform Supporting Geospatial Collaboration for GIS Education

Science.gov (United States)

Cheng, X.; Gui, Z.; Hu, K.; Gao, S.; Shen, P.; Wu, H.

2015-05-01

GIS-related education needs support of geo-data and geospatial software. Although there are large amount of geographic information resources distributed on the web, the discovery, process and integration of these resources are still unsolved. Researchers and teachers always searched geo-data by common search engines but results were not satisfied. They also spent much money and energy on purchase and maintenance of various kinds of geospatial software. Aimed at these problems, a cloud-based geospatial collaboration platform called GeoSquare was designed and implemented. The platform serves as a geoportal encouraging geospatial data, information, and knowledge sharing through highly interactive and expressive graphic interfaces. Researchers and teachers can solve their problems effectively in this one-stop solution. Functions, specific design and implementation details are presented in this paper. Site of GeoSquare is: http://geosquare.tianditu.com/

Integration of Web-GIS and oil spill simulation applications for environmental management of near-shore spill accidents

International Nuclear Information System (INIS)

Goto, S.; Miyata, D.; Varlamov, S.M.; Kim, S.-W.

2001-01-01

In the event of a near-shore oil spill, the use of a web-based Geographic Information System (GIS) can greatly improve emergency response management and oil recovery operations by providing real-time information support. This paper presented a Web-GIS that is used in combination with an oil spill simulation model. The structure and content of the system was defined after the Nakhodka vessel spilled oil in the Sea of Japan in January 1997, leaving serious environmental damage to the coastal area of the Ishikawa prefecture. The Web-GIS provides a wide range of environmental and oil spill related information, presented in a geographical form. The system also consolidates spill and environmental damage related information from different sources and provides links to the specialized environmental and socio-economical information of other GIS databases. The oil spill modeling subsystem is part of an application for protection planning and oil recovery operations. With this system, oil-drift simulation begins at the onset of any oil spill and then remote sensing data are used to estimate the position and state of the spilled oil. The spill information is then assimilated into the spill model and the observed simulated results are uploaded to the Web page for public information. The applicability of the Web-GIS is extended by support for information gathering from the public and the responsible agencies. The relative simplicity of the system interface is an added advantage. 9 refs., 4 figs

Facilitating Spatial Thinking in World Geography Using Web-Based GIS

Science.gov (United States)

Jo, Injeong; Hong, Jung Eun; Verma, Kanika

2016-01-01

Advocates for geographic information system (GIS) education contend that learning about GIS promotes students' spatial thinking. Empirical studies are still needed to elucidate the potential of GIS as an instructional tool to support spatial thinking in other geography courses. Using a non-equivalent control group research design, this study…

Through ARIPAR-GIS the quantified area risk analysis supports land-use planning activities.

Science.gov (United States)

Spadoni, G; Egidi, D; Contini, S

2000-01-07

The paper first summarises the main aspects of the ARIPAR methodology whose steps can be applied to quantify the impact on a territory of major accident risks due to processing, storing and transporting dangerous substances. Then the capabilities of the new decision support tool ARIPAR-GIS, implementing the mentioned procedure, are described, together with its main features and types of results. These are clearly shown through a short description of the updated ARIPAR study (reference year 1994), in which the impact of changes due to industrial and transportation dynamics on the Ravenna territory in Italy were evaluated. The brief explanation of how results have been used by local administrations offers the opportunity to discuss about advantages of the quantitative area risk analysis tool in supporting activities of risk management, risk control and land-use planning.

Emerging Technologies in the Built Environment: Geographic Information Science (GIS), 3D Printing, and Additive Manufacturing

Energy Technology Data Exchange (ETDEWEB)

New, Joshua Ryan [ORNL

2014-01-01

Abstract 1: Geographic information systems emerged as a computer application in the late 1960s, led in part by projects at ORNL. The concept of a GIS has shifted through time in response to new applications and new technologies, and is now part of a much larger world of geospatial technology. This presentation discusses the relationship of GIS and estimating hourly and seasonal energy consumption profiles in the building sector at spatial scales down to the individual parcel. The method combines annual building energy simulations for city-specific prototypical buildings and commonly available geospatial data in a GIS framework. Abstract 2: This presentation focuses on 3D printing technologies and how they have rapidly evolved over the past couple of years. At a basic level, 3D printing produces physical models quickly and easily from 3D CAD, BIM (Building Information Models), and other digital data. Many AEC firms have adopted 3D printing as part of commercial building design development and project delivery. This presentation includes an overview of 3D printing, discusses its current use in building design, and talks about its future in relation to the HVAC industry. Abstract 3: This presentation discusses additive manufacturing and how it is revolutionizing the design of commercial and residential facilities. Additive manufacturing utilizes a broad range of direct manufacturing technologies, including electron beam melting, ultrasonic, extrusion, and laser metal deposition for rapid prototyping. While there is some overlap with the 3D printing talk, this presentation focuses on the materials aspect of additive manufacturing and also some of the more advanced technologies involved with rapid prototyping. These technologies include design of carbon fiber composites, lightweight metals processing, transient field processing, and more.

ISEM: Europe's ESPRIT support for emergency management

International Nuclear Information System (INIS)

Andersen, V.

1991-01-01

The CEC-supported ISEM project to develop Information technology Support for Emergency Management was started in 1989. Two specific applications to demonstrate the ISEM system were selected; a NPP accident and a chemical plant emergency. An Emergency Management System provides user-friendly facilities for communication between the numerous local, regional and national organizations

Information technology support for emergency management

International Nuclear Information System (INIS)

Uuspaeae, P.

1990-01-01

Information systems for distributed decision support for emergency management are considered. Specific applications include nuclear power plant emergencies. Emergencies in other industries such as chemical industry may also be considered. Research in the ISEM project is briefly summarized

Users Guide to VSMOKE-GIS for Workstations

Science.gov (United States)

Mary F. Harms; Leonidas G. Lavdas

1997-01-01

VSMOKE-GIS was developed to help prescribed burners in the national forests of the Southeastern United States visualize smoke dispersion and to plan prescribed burns. Developed for use on workstations, this decision-support system consists of a graphical user interface, written in Arc/Info Arc Macro Language, and is linked to a FORTRAN computer program. VSMOKE-GIS...

A large scale GIS geodatabase of soil parameters supporting the modeling of conservation practice alternatives in the United States

Science.gov (United States)

Water quality modeling requires across-scale support of combined digital soil elements and simulation parameters. This paper presents the unprecedented development of a large spatial scale (1:250,000) ArcGIS geodatabase coverage designed as a functional repository of soil-parameters for modeling an...

GIS WORK GROUP: AN OVERVIEW (INCLUDES GIS-QA AND AUDITING GIS DATABASE SYSTEMS)

Science.gov (United States)

In order to promote cooperation in the implementation of GIS in regional offices, a GIS Regional Workgroup was established by the ten Regions in 1989. Since that time the GIS Work Group evolved and now consists of members from each of the ten EPA Regional Offices, the Office of A...

INTEGRATION OF GIS AND BIM FOR INDOOR GEOVISUAL ANALYTICS

Directory of Open Access Journals (Sweden)

B. Wu

2016-06-01

Full Text Available This paper presents an endeavour of integration of GIS (Geographical Information System and BIM (Building Information Modelling for indoor geovisual analytics. The merits of two types of technologies, GIS and BIM are firstly analysed in the context of indoor environment. GIS has well-developed capabilities of spatial analysis such as network analysis, while BIM has the advantages for indoor 3D modelling and dynamic simulation. This paper firstly investigates the important aspects for integrating GIS and BIM. Different data standards and formats such as the IFC (Industry Foundation Classes and GML (Geography Markup Language are discussed. Their merits and limitations in data transformation between GIS and BIM are analysed in terms of semantic and geometric information. An optimized approach for data exchange between GIS and BIM datasets is then proposed. After that, a strategy of using BIM for 3D indoor modelling, GIS for spatial analysis, and BIM again for visualization and dynamic simulation of the analysis results is presented. Based on the developments, this paper selects a typical problem, optimized indoor emergency evacuation, to demonstrate the integration of GIS and BIM for indoor geovisual analytics. The block Z of the Hong Kong Polytechnic University is selected as a test site. Detailed indoor and outdoor 3D models of the block Z are created using a BIM software Revit. The 3D models are transferred to a GIS software ArcGIS to carry out spatial analysis. Optimized evacuation plans considering dynamic constraints are generated based on network analysis in ArcGIS assuming there is a fire accident inside the building. The analysis results are then transferred back to BIM software for visualization and dynamic simulation. The developed methods and results are of significance to facilitate future development of GIS and BIM integrated solutions in various applications.

Application of GIS from the multifunctionality aspect

Directory of Open Access Journals (Sweden)

Mirko A. Borisov

2011-04-01

Full Text Available Application of computer technology in the Earth science has led to the creation and development of new scientific disciplines, particularly digital cartography and GIS. This paper describes the application of GIS from several points of view such as: multi-scale, multi-thematic, multi-viewing, accommodation to standard software platforms and multi-user data accesses. Introduction The premise of a successful usage of topographic data nowadays implies their disposal in a digital form and organisation in a modern way, suitable for further computer processing. It is a unanimous opinion that it can be successfully completed only through creating data basis of space developing GIS. The theme of the written work is the development and application of GIS, and management of topographic data in accordance with international standards and users' needs. Moving to digital technology of creating and using topographic data should not be literal translation of the analogue map into a digital picture or just the automation of the map making using digital technology. The new method implies the formation of the central topographic data base which would generate displays of arbitrary scales, desired volumes of content, changeable sheet dimensions, various thematic displays, altogether in accordance with users' demands and needs. Digital cartography and GIS The development and application of computers in the area of earth sciences caused the creation of new definitions and disciplines among which are noticeable computer supported cartography and GIS. The computer-supported cartography was in its later phase called digital cartography and it can be used in two ways: like modern technology of date processing about space and like a new discipline. The main principle on which digital cartography as a discipline is based represents the processing and visualization of data about space but with computer supported technology. Application of GIS from various aspects

Hazard Analysis and Disaster Preparedness in the Fairbanks North Star Borough, Alaska using Hazard Simulations, GIS, and Network Analysis

Science.gov (United States)

Schaefer, K.; Prakash, A.; Witte, W.

2011-12-01

The Fairbanks North Star Borough (FNSB) lies in interior Alaska, an area that is dominated by semiarid, boreal forest climate. FNSB frequently witnesses flooding events, wild land fires, earthquakes, extreme winter storms and other natural and man-made hazards. Being a large 19,065 km2 area, with a population of approximately 97,000 residents, providing emergency services to residents in a timely manner is a challenge. With only four highways going in and out of the borough, and only two of those leading to another city, most residents do not have quick access to a main road. Should a major disaster occur and block one of the two highways, options for evacuating or getting supplies to the area quickly dwindle. We present the design of a Geographic Information System (GIS) and network analysis based decision support tool that we have created for planning and emergency response. This tool will be used by Emergency Service (Fire/EMS), Emergency Management, Hazardous Materials Team, and Law Enforcement Agencies within FNSB to prepare and respond to a variety of potential disasters. The GIS combines available road and address networks from different FNSB agencies with the 2010 census data. We used ESRI's ArcGIS and FEMA's HAZUS-MH software to run multiple disaster scenarios and create several evacuation and response plans. Network analysis resulted in determining response time and classifying the borough by response times to facilitate allocation of emergency resources. The resulting GIS database can be used by any responding agency in FNSB to determine possible evacuation routes, where to open evacuation centers, placement of resources, and emergency response times. We developed a specific emergency response plan for three common scenarios: (i) major wildfire threatening Fairbanks, (ii) a major earthquake, (iii) loss of power during flooding in a flood-prone area. We also combined the network analysis results with high resolution imagery and elevation data to determine

Developing Trainee Teacher Practice with Geographical Information Systems (GIS)

Science.gov (United States)

Walshe, Nicola

2017-01-01

There is general agreement that geographical information systems (GIS) have a place within the geography classroom; they offer the potential to support geographical learning, exploring real-world problems through student-centred learning, and developing spatial thinking. Despite this, teachers often avoid engaging with GIS and research suggests…

Developing GIS based decision-support tools for agricultural counter-measurements after radiation accident

International Nuclear Information System (INIS)

Kepka, Pavel; Prochazka, Jan; Brom, Jakub; Pecharova, Emilie

2009-01-01

There is a whole variety of possibilities proposed by EURANOS data sheets for agriculture, for mid-term and long-term counter-measures after contamination of crops by radiation. We have developed a set of supportive tools for decision-makers within the project 'Methods of evaluation of contaminated territory after radiation accident - the importance of structure and functioning of a land cover'. Our TM tools are based on ArcGIS platform and Python programming language. We have developed a simple model for estimating the current biomass of the polluted crops. Inputs for this model are: a shape file of land cover data, database table with customisable plant growth characteristics and shape file of polluted areas. The model provides a shape file data set of estimated amounts of biomass of selected crops per hectare for a given day. The results are helpful for better performing of the countermeasure 'Early removal of crops'. The total amount of polluted waste, logistic costs (transport of people and material; required time; other costs) could be estimated only with basic GIS tools. The number of days expected for the harvest can be also calculated and compared with the dose and half-lives of the contaminating radionuclides. This analysis could also lead to a 'Do nothing' decision, especially in case of radionuclides with short times of half-life. (author)

Constructing a management strategy for contaminated agricultural systems using the decision support system RODOS and GIS technology

International Nuclear Information System (INIS)

Montero, Milagros; Dvorzhak, Alla

2008-01-01

Full text: In the event of a radiological accident or incident, the construction of a strategy for managing the possible contaminated systems is an important component into the emergency response process. There are a wide collection of possible management options, but for any one accident scenario only a subset of options conforming a management strategy will be applied. The selection of these options depends on a wide range of criteria (time and space, effectiveness, economic cost, radiological and environmental impact, waste disposal, legislative issues and societal and ethical aspects, for example) which, nowadays, are implemented into tools and systems to guide to the decision-makers. This work aims to establish the usefulness and applicability of the Decision Support System RODOS for representative Spanish situations where food production systems become contaminated after a radiological emergency. This aspect is demonstrated for developing an management strategy for one scenario involving contamination of the food chain after a hypothetical accidental release of 137 Cs and 90 Sr from a Spanish NPP. For this scenario, the NWP (Numerical Weather Prediction) data of INM (National Meteorological Institute) have been considered. The deposited contamination, the activity concentration in significant agricultural products for this region, human doses and countermeasures proposed by the RODOS system have been considered and analyzed. There could be defined a ranking of the information intended for the decision makers based on the importance of the decisions to be made from it in each phase of the accident. In the initial moments, there is no detailed radiological information, and urgent countermeasures must be taken promptly to be effective. In regard to the information in which decision is supported during subsequent phases of the accident (late phase), time scheduling is not limiting, being the key requirement to count on the most reliable and complete information

Open cyberGIS software for geospatial research and education in the big data era

Science.gov (United States)

Wang, Shaowen; Liu, Yan; Padmanabhan, Anand

CyberGIS represents an interdisciplinary field combining advanced cyberinfrastructure, geographic information science and systems (GIS), spatial analysis and modeling, and a number of geospatial domains to improve research productivity and enable scientific breakthroughs. It has emerged as new-generation GIS that enable unprecedented advances in data-driven knowledge discovery, visualization and visual analytics, and collaborative problem solving and decision-making. This paper describes three open software strategies-open access, source, and integration-to serve various research and education purposes of diverse geospatial communities. These strategies have been implemented in a leading-edge cyberGIS software environment through three corresponding software modalities: CyberGIS Gateway, Toolkit, and Middleware, and achieved broad and significant impacts.

Open cyberGIS software for geospatial research and education in the big data era

Directory of Open Access Journals (Sweden)

Shaowen Wang

2016-01-01

Full Text Available CyberGIS represents an interdisciplinary field combining advanced cyberinfrastructure, geographic information science and systems (GIS, spatial analysis and modeling, and a number of geospatial domains to improve research productivity and enable scientific breakthroughs. It has emerged as new-generation GIS that enable unprecedented advances in data-driven knowledge discovery, visualization and visual analytics, and collaborative problem solving and decision-making. This paper describes three open software strategies–open access, source, and integration–to serve various research and education purposes of diverse geospatial communities. These strategies have been implemented in a leading-edge cyberGIS software environment through three corresponding software modalities: CyberGIS Gateway, Toolkit, and Middleware, and achieved broad and significant impacts.

Multimodale trafiknet i GIS (Multimodal Traffic Network in GIS)

DEFF Research Database (Denmark)

Kronbak, Jacob; Brems, Camilla Riff

1996-01-01

The report introduces the use of multi-modal traffic networks within a geographical Information System (GIS). The necessary theory of modelling multi-modal traffic network is reviewed and applied to the ARC/INFO GIS by an explorative example.......The report introduces the use of multi-modal traffic networks within a geographical Information System (GIS). The necessary theory of modelling multi-modal traffic network is reviewed and applied to the ARC/INFO GIS by an explorative example....

GIS4schools: a new approach in GIS education

Science.gov (United States)

Demharter, Timo; Michel, Ulrich

2012-10-01

From a didactic point of view the procurement and the application of modern geographical methods and functions become more and more important. Although the integration of GIS in the classroom is repeatedly demanded, inter alia in Baden-Württemberg, Germany, the number of GIS users is small in comparison to other European countries or the USA. Possible reasons for this could, for instance, lie in the lack of GIS and computer knowledge of the teachers themselves and the subsequent extensive training effort in Desktop-GIS (KERSKI 2000, SCHLEICHER 2004). Today you have the technological possibilities to provide the broad public with geoinformation and geotechnology: Web technologies offer access to web-based, mobile and local applications through simple gateways. The objective of the project "GIS4schools" is to generate a service-based infrastructure, which can be operated via mobile clients as well as via Desktop-GIS or a Browser. Due to the easy availability of the services the focus is in particular on students. This circumstance is a novelty through which a differentiated approach to the implementation of GIS in schools is established. Accordingly, the pilot nature of this project becomes apparent as well as its greater importance beyond its actual content especially for the sector of media development at colleges of education. The continuity from Web-GIS to Desktop-GIS is innovative: The goal is to create an adapted multi-level solution which allows both, an easy introduction if desired or a detailed analysis - either to be achieved with a focus especially on students and their cooperation among one another.

GIS and Public Health

Directory of Open Access Journals (Sweden)

Stefania Bertazzon

2014-06-01

Full Text Available This Special Issue on GIS and public health is the result of a highly selective process, which saw the participation of some 20 expert peer-reviewers and led to the acceptance of one half of the high-quality submissions received over the past year. Many threads link these papers to each other and, indeed, to our original call for papers, but the element that most clearly emerges from these works is the inextricable connection between public health and the environment. Indeed, GIS analysis of public health simply cannot disregard the geospatial dimension of environmental resources and risks. What consistently emerges from these analyses is that current geospatial research can only scratch the surface of the complex interactions of spatial resources, risks, and public health. In today’s world, or at least in the developed world, researchers and practitioners can count on virtually endless data, on inexpensive computational power, and on seamless connectivity. In this research environment, these papers point to the need for improved analytical tools, covering concepts, representation, modeling and reliability. These works are important contributions that help us to identify what advances in geospatial analysis can better address the complex interactions of public health with our physical and cultural environment, and bridge research and practice, so that geospatial analyses can inform public health policy making. [...

GIS IN THE CLOUD: USING WEBGIS FOR TEACHING SECONDARY GEOGRAPHY

Directory of Open Access Journals (Sweden)

Andrew J. Milson

Full Text Available RESUMEN:There is no doubt among most geography educators that GIS is an important tool for teaching and learning, but its use has been slowed by issues such as the cost of the software and the management of large spatial data files. The move to cloud computing is one trend that is promising for GIS in education. The "cloud" refers to a virtual network that provides many users with access to files, services, and applications. In this article I argue that cloud computing and WebGIS have the potential to transform geography education. I will describe three case studies that make use of these emerging tools in classrooms in the US, and discuss the lessons that we can learn from these cases. PALABRAS CLAVE WEBSIG; SIG; enseñanza de la geografía; la nube de Internet; ArcGIS Online; ArcGIS Explorer Desktop (AGX. ABSTRACT There is no doubt among most geography educators that GIS is an important tool for teaching and learning, but its use has been slowed by issues such as the cost of the software and the management of large spatial data files. The move to cloud computingis one trend that is promising for GIS in education. The "cloud" refers to a virtual network that provides many users with access to files, services, and applications. In this article I argue that cloud computing and WebGIS have the potential to transform geography education. I will describe three case studies that make use of these emerging tools in classrooms in the US, and discuss the lessons that we can learn from these cases. KEY WORDS WEBGIS; GIS; cloud computing; ArcGIS Online; ArcGIS Explorer Desktop (AGX. RÉSUMÉ Il n'ya aucun doute parmi les éducateurs les plus géographie que le SIG est un outil important pour l'enseignement et l'apprentissage, mais son utilisation a été ralentie par des problèmes tels que le coût du logiciel et la gestion des grands fichiers de données spatiales. Le passage au nuage de l'internet est une tendance qui est prometteur pour les SIG dans l

IT support for emergency management - ISEM

International Nuclear Information System (INIS)

Andersen, V.

1990-11-01

The project is aimed at the development of an integrated information system capable of supporting the complex, dynamic distributed decision making in the management of emergencies. Emphasis will be put on definition of a system architecture and on development of an application generator and tools to support the full life cycle of the system. The development will be driven by the requirements derived from emergency organisations in two different industries. Care is taken that the results are easily applicable and adaptable to other organisations. (author)

Emergency support centre concept for the enhanced CANDU 6

International Nuclear Information System (INIS)

Nadimian, R.M.; Leger, R.

2013-01-01

In a two-unit Enhanced CANDU 6 (EC6) design, the overall management of an emergency is by the plant emergency support staff using the Emergency Support Centre (ESC). The ESC is a shared facility between both units and is separate from the plant control rooms. ESC is used to provide support for managing overall emergency response, coordinating radiological and environmental assessments, determining recommended public protective actions, and coordinating emergency response activities with federal, provincial, and municipal agencies. Such a facility provides provisions to protect its occupants from hazards resulting from accident conditions, and applicable natural external hazards. (author)

Advantages of integration of uranium exploration data in GIS and models as tools for decision support

International Nuclear Information System (INIS)

Tusveld, M.C.L.

1997-01-01

In many areas where uranium has been or is explored, an enormous amount of data on geology and hydrogeology is available. When these uranium exploration data are stored in a structured way, they can be made useful for other purposes dm uranium exploration only. For instance, in case of environmental pollution, which is often a side-effect of uranium activities such as mining and leaching, the data can be used to develop a computer model of the environment. With such a model impacts can be calculated of different scenarios for cleaning up or isolation of the pollution. A GIS can be used to store the data, to visualize the data (map production) and to analyse the data, but also to calculate input for the models. The advantages of using GIS and models as tools for decision support are explained with the Contaminant Transport Information System (CTIS) as a case study. The CTIS has been developed for remediation operations in the uranium mining area Straz pod Ralskem and Hamr in the Czech Republic. The CTIS consists of a GIS database, a regional groundwater flow model and a local contaminant transport model as well as interfaces for data transfer between the components of the information system. The power of the CTIS lies in the fact that the modelling necessary for the design of a remediation operation can be carried out efficiently by using one of the two models, depending on the specific question. Thus alternative remediation scenarios can be judged easily and fairly on their consequences and effectiveness. (author)

GIS4schools: custom-made GIS-applications for educational use

Science.gov (United States)

Demharter, Timo; Michel, Ulrich

2013-10-01

From a didactic point of view the procurement and the application of modern geographical methods and functions become more and more important. Although the integration of GIS in the classroom is repeatedly demanded, inter alia in Baden-Württemberg, Germany, the number of GIS users is small in comparison to other European countries or the USA. Possible reasons for this could, for instance, lie in the lack of GIS and computer knowledge of the teachers themselves and the subsequent extensive training effort in Desktop-GIS [1]. Today you have the technological possibilities to provide the broad public with geoinformation and geotechnology: Web technologies offer access to web-based, mobile and local applications through simple gateways. The objective of the project "GIS4schools" is to generate a service-based infrastructure, which can be operated via mobile clients as well as via Desktop-GIS or a Browser. Due to the easy availability of the services the focus is in particular on students. This circumstance is a novelty through which a differentiated approach to the implementation of GIS in schools is established. Accordingly, the pilot nature of this project becomes apparent as well as its greater importance beyond its actual content especially for the sector of media development at colleges of education. The continuity from Web-GIS to Desktop-GIS is innovative: The goal is to create an adapted multi-level solution which allows both, an easy introduction if desired or a detailed analysis - either to be achieved with a focus especially on students and their cooperation among one another.

PROMAB-GIS: A GIS based Tool for Estimating Runoff and Sediment Yield in running Waters

Science.gov (United States)

Jenewein, S.; Rinderer, M.; Ploner, A.; Sönser, T.

2003-04-01

In recent times settlements have expanded, traffic and tourist activities have increased in most alpine regions. As a consequence, on the one hand humans and goods are affected by natural hazard processes more often, while on the other hand the demand for protection by both technical constructions and planning measures carried out by public authorities is growing. This situation results in an ever stronger need of reproducibility, comparability, transparency of all methods applied in modern natural hazard management. As a contribution to a new way of coping this situation Promab-GIS Version 1.0 has been developed. Promab-Gis has been designed as a model for time- and space-dependent determination of both runoff and bedload transport in rivers of small alpine catchment areas. The estimation of the unit hydrograph relies upon the "rational formula" and the time-area curves of the watershed. The time area diagram is a graph of cumulative drainage area contributing to discharge at the watershed outlet within a specified time of travel. The sediment yield is estimated for each cell of the channel network by determining the actual process type (erosion, transport or accumulation). Two types of transport processes are considered, sediment transport and debris flows. All functions of Promab-GIS are integrated in the graphical user interface of ArcView as pull-up menus and tool buttons. Hence the application of Promab-GIS does not rely on a sophisticated knowledge of GIS in general, respectively the ArcView software. However, despite the use of computer assistance, Promab-GIS still is an expert support system. In order to obtain plausible results, the users must be familiar with all the relevant processes controlling runoff and sediment yield in torrent catchments.

Geographic information systems (GIS): an emerging method to assess demand and provision for rehabilitation services.

Science.gov (United States)

Passalent, Laura; Borsy, Emily; Landry, Michel D; Cott, Cheryl

2013-09-01

To illustrate the application of geographic information systems (GIS) as a tool to assess rehabilitation service delivery by presenting results from research recently conducted to assess demand and provision for community rehabilitation service delivery in Ontario, Canada. Secondary analysis of data obtained from existing sources was used to establish demand and provision profiles for community rehabilitation services. These data were integrated using GIS software. A number of descriptive maps were produced that show the geographical distribution of service provision variables (location of individual rehabilitation health care providers and location of private and publicly funded community rehabilitation clinics) in relation to the distribution of demand variables (location of the general population; location of specific populations (i.e., residents age 65 and older) and distribution of household income). GIS provides a set of tools for describing and understanding the spatial organization of the health of populations and the distribution of health services that can aid the development of health policy and answer key research questions with respect to rehabilitation health services delivery. Implications for Rehabilitation It is important to seek out alternative and innovative methods to examine rehabilitation service delivery. GIS is a computer-based program that takes any data linked to a geographically referenced location and processes it through a software system that manages, analyses and displays the data in the form of a map, allowing for an alternative level of analysis. GIS provides a set of tools for describing and understanding the spatial organization of population health and health services that can aid the development of health policy and answer key research questions with respect to rehabilitation health services delivery.

Integrating Geographical Information Systems (GIS) with Hydrological Modelling – Applicability and Limitations

OpenAIRE

Rajesh VijayKumar Kherde; Dr. Priyadarshi. H. Sawant

2013-01-01

The evolution of Geographic information systems (GIS) facilitated the use digital terrain data for topography based hydrological modelling. The use of spatial data for hydrological modelling emerged from the great capability of GIS tools to store and handle the data associated hydro-morphology of the basin. These models utilize the spatially variable terrain data for converting rainfall into surface runoff.Manual map manipulation has always posed difficulty in analysing and designing large sc...

A GIS support system for declaration and verification

International Nuclear Information System (INIS)

Poucet, A.; Contini, S.; Bellezza, F.

2001-01-01

Full text: The timely detection of a diversion of a significant amount of nuclear material from the civil cycle represents a complex activity that requires the use of powerful support systems. In this field the authors developed SIT (Safeguards Inspection Tool), an integrated platform for collecting, managing and analysing data from a variety of sources to support declarations and verification activities. Information dealt with is that requested by both INFCIRC/153 and INFCIRC/540 protocols. SIT is based on a low-cost Geographic Information System platform and extensive use is made of commercial software to reduce maintenance costs. The system has been developed using ARCVIEW GIS for Windows NT platforms. SIT is conceived as an integrator of multimedia information stored into local and remote databases; efforts have been focused on the automation of several tasks in order to produce a user-friendly system. Main characteristics of SIT are: Capability to deal with multimedia data, e.g. text, images, video, using user-selected COTS; Easy access to external databases, e.g. Oracle, Informix, Sybase, MS-Access, directly from the site map; Selected access to open source information via Internet; Capability to easily geo-reference site maps, to generate thematic layers of interest and to perform spatial analysis; Capability of performing aerial and satellite image analysis operations, e.g. rectification, change detection, feature extraction; Capability to easily add and run external models for e.g. material data accounting, completeness check, air dispersion models, material flow graph generation and to describe results in graphical form; Capability to use a Geo-positioning systems (GPS) with a portable computer, SIT is at an advanced stage of development and will be very soon interfaced with VERITY, a powerful Web search engine in order to allow open source information retrieval from geographical maps. The paper will describe the main features of SIT and the advantages of

A GIS support system for declaration and verification

Energy Technology Data Exchange (ETDEWEB)

Poucet, A; Contini, S; Bellezza, F [European Commission, Joint Research Centre, Institute for Systems Informatics and Safety (ISIS), Ispra (Italy)

2001-07-01

Full text: The timely detection of a diversion of a significant amount of nuclear material from the civil cycle represents a complex activity that requires the use of powerful support systems. In this field the authors developed SIT (Safeguards Inspection Tool), an integrated platform for collecting, managing and analysing data from a variety of sources to support declarations and verification activities. Information dealt with is that requested by both INFCIRC/153 and INFCIRC/540 protocols. SIT is based on a low-cost Geographic Information System platform and extensive use is made of commercial software to reduce maintenance costs. The system has been developed using ARCVIEW GIS for Windows NT platforms. SIT is conceived as an integrator of multimedia information stored into local and remote databases; efforts have been focused on the automation of several tasks in order to produce a user-friendly system. Main characteristics of SIT are: Capability to deal with multimedia data, e.g. text, images, video, using user-selected COTS; Easy access to external databases, e.g. Oracle, Informix, Sybase, MS-Access, directly from the site map; Selected access to open source information via Internet; Capability to easily geo-reference site maps, to generate thematic layers of interest and to perform spatial analysis; Capability of performing aerial and satellite image analysis operations, e.g. rectification, change detection, feature extraction; Capability to easily add and run external models for e.g. material data accounting, completeness check, air dispersion models, material flow graph generation and to describe results in graphical form; Capability to use a Geo-positioning systems (GPS) with a portable computer, SIT is at an advanced stage of development and will be very soon interfaced with VERITY, a powerful Web search engine in order to allow open source information retrieval from geographical maps. The paper will describe the main features of SIT and the advantages of

GIS-based multicriteria municipal solid waste landfill suitability analysis: a review of the methodologies performed and criteria implemented.

Science.gov (United States)

Demesouka, O E; Vavatsikos, A P; Anagnostopoulos, K P

2014-04-01

Multicriteria spatial decision support systems (MC-SDSS) have emerged as an integration of the geographical information systems (GIS) and multiple criteria decision analysis (MCDA) methods. GIS-based MCDA allows the incorporation of conflicting objectives and decision maker (DM) preferences into spatial decision models. During recent decades, a variety of research articles have been published regarding the implementation of methods and/or tools in a variety of real-world case studies. The article discusses, in detail, the criteria and methods that are implemented in GIS-based landfill siting suitability analysis and especially the exclusionary and non-exclusionary criteria that can be considered when selecting sites for municipal solid waste (MSW) landfills. This paper reviews 36 seminal articles in which the evaluation of candidate landfill sites is conducted using MCDA methods. After a brief description of the main components of a MC-SDSS and the applied decision rules, the review focuses on the criteria incorporated into the decision models. The review provides a comprehensive guide to the landfill siting analysis criteria, providing details regarding the utilization methods, their decision or exclusionary nature and their monotonicity.

Una metodologia GIS per la valutazione della suscettibilità da frana

Directory of Open Access Journals (Sweden)

Leoni Gabriele

2010-03-01

Full Text Available GIS methodology to assess landslide susceptibility: application to a river catchment of central ItalyThis paper illustrates a GIS supported methodology for the assessment of landslide susceptibility. The methodology involves four steps: survey, site analysis, macro-area analysis, and susceptibility analysis. Statiscal and GIS processing of basical large scale geological dataset leads to the recognition of discriminating parameters (land conditions necessary but not sufficient to trigger landslides and predisposing factors (conditions that worsen slope stability separately for each landslides types. The susceptibility function combines GIS data to draw landslide susceptibility maps. These results represent the preliminary step for the assessment of landslide hazard and risk.

Public Safety Transmitter Towers, Civil Service emergency siren locations within Sedgwick County. Cover is maintained interactively by GIS staff. Primary attributes include siren ID, class, range, model, description, ownership, control, address, city, and GPS verification status. Publi, Published in 2008, 1:1200 (1in=100ft) scale, Sedgwick County Government.

Data.gov (United States)

NSGIC Local Govt | GIS Inventory — Public Safety Transmitter Towers dataset current as of 2008. Civil Service emergency siren locations within Sedgwick County. Cover is maintained interactively by GIS...

GIS and radiological crisis management; SIG et gestion de crise radiologique

Energy Technology Data Exchange (ETDEWEB)

Kacenelen, Y.

2009-07-01

The author reports a new operational exercise performed on September 17, 2009 on the CEA Saclay site. For this purpose, the CEA (the French Atomic Energy Commission) developed M2IRAGE, a tool based on ArcGIS 9.3 technologies. This tool allows an easier data collection and exploitation in order to quickly map the distribution of radioactive particles and thus help the management of the health response and emergency organization within two hours after the warning. This tool notably uses a geographic information system (GIS)

GIS and optimisation : Potential benefits for emergency facility location in humanitarian logistics

NARCIS (Netherlands)

Rodriguez-Espanola, O.; Albores, P.; Brewster, C.A.W.

2016-01-01

Floods are one of the most dangerous and common disasters worldwide, and these disasters are closely linked to the geography of the affected area. As a result, several papers in the academic field of humanitarian logistics have incorporated the use of Geographical Information Systems (GIS) for

Developing a GIS for CO2 analysis using lightweight, open source components

Science.gov (United States)

Verma, R.; Goodale, C. E.; Hart, A. F.; Kulawik, S. S.; Law, E.; Osterman, G. B.; Braverman, A.; Nguyen, H. M.; Mattmann, C. A.; Crichton, D. J.; Eldering, A.; Castano, R.; Gunson, M. R.

2012-12-01

There are advantages to approaching the realm of geographic information systems (GIS) using lightweight, open source components in place of a more traditional web map service (WMS) solution. Rapid prototyping, schema-less data storage, the flexible interchange of components, and open source community support are just some of the benefits. In our effort to develop an application supporting the geospatial and temporal rendering of remote sensing carbon-dioxide (CO2) data for the CO2 Virtual Science Data Environment project, we have connected heterogeneous open source components together to form a GIS. Utilizing widely popular open source components including the schema-less database MongoDB, Leaflet interactive maps, the HighCharts JavaScript graphing library, and Python Bottle web-services, we have constructed a system for rapidly visualizing CO2 data with reduced up-front development costs. These components can be aggregated together, resulting in a configurable stack capable of replicating features provided by more standard GIS technologies. The approach we have taken is not meant to replace the more established GIS solutions, but to instead offer a rapid way to provide GIS features early in the development of an application and to offer a path towards utilizing more capable GIS technology in the future.

An Ontology-Based GIS for Genomic Data Management of Rumen Microbes.

Science.gov (United States)

Jelokhani-Niaraki, Saber; Tahmoorespur, Mojtaba; Minuchehr, Zarrin; Nassiri, Mohammad Reza

2015-03-01

During recent years, there has been exponential growth in biological information. With the emergence of large datasets in biology, life scientists are encountering bottlenecks in handling the biological data. This study presents an integrated geographic information system (GIS)-ontology application for handling microbial genome data. The application uses a linear referencing technique as one of the GIS functionalities to represent genes as linear events on the genome layer, where users can define/change the attributes of genes in an event table and interactively see the gene events on a genome layer. Our application adopted ontology to portray and store genomic data in a semantic framework, which facilitates data-sharing among biology domains, applications, and experts. The application was developed in two steps. In the first step, the genome annotated data were prepared and stored in a MySQL database. The second step involved the connection of the database to both ArcGIS and Protégé as the GIS engine and ontology platform, respectively. We have designed this application specifically to manage the genome-annotated data of rumen microbial populations. Such a GIS-ontology application offers powerful capabilities for visualizing, managing, reusing, sharing, and querying genome-related data.

Cloud Computing and Its Applications in GIS

Science.gov (United States)

Kang, Cao

2011-12-01

this assessment of cloud computing technology, the exploration of the challenges and solutions to the migration of GIS algorithms to cloud computing infrastructures, and the examination of strategies for serving large amounts of GIS data in a cloud computing infrastructure, this dissertation lends support to the feasibility of building a cloud-based GIS system. However, there are still challenges that need to be addressed before a full-scale functional cloud-based GIS system can be successfully implemented. (Abstract shortened by UMI.)

Più turismo con il GIS

Directory of Open Access Journals (Sweden)

Erminio Paolo Canavese

2015-02-01

Full Text Available In questa case history Virtualgeo presenta la sua soluzione per diffondere l’uso delle nuove tecnologie geomatiche a supporto del turismo grazie a un WebGIS ricco di funzionalità. La realizzazione di un percorso turistico digitale auspica di fornire possibili suggerimenti all’interno del processo di adeguamento tecnologico perseguito dalle municipalità.In this case study Virtualgeo presents its solution to spread the use of new geomatics technologies to support tourism through a webGIS that is rich of features. The creation of a tourist route through digital technology-based processing tools hopes to provide possible suggestions in the process of technological updating pursued by the municipalities of Eastern Venice, providing those simple solutions that become more and more "necessary" in an era constructed through the network. The created webGIS is a tourist product that is useful for the institutions directly concerned with the promotion of the territory; for the "natives", i.e. the citizens who often know little the area where they live, and for the eco-tourists visiting this wonderful land. The webGIS should not be neglected as an extraordinary tool of knowledge of the area (cultural heritage, landscape, environment for teaching in schools of all levels.

Più turismo con il GIS

Directory of Open Access Journals (Sweden)

Erminio Paolo Canavese

2015-02-01

Full Text Available In questa case history Virtualgeo presenta la sua soluzione per diffondere l’uso delle nuove tecnologie geomatiche a supporto del turismo grazie a un WebGIS ricco di funzionalità. La realizzazione di un percorso turistico digitale auspica di fornire possibili suggerimenti all’interno del processo di adeguamento tecnologico perseguito dalle municipalità. In this case study Virtualgeo presents its solution to spread the use of new geomatics technologies to support tourism through a webGIS that is rich of features. The creation of a tourist route through digital technology-based processing tools hopes to provide possible suggestions in the process of technological updating pursued by the municipalities of Eastern Venice, providing those simple solutions that become more and more "necessary" in an era constructed through the network. The created webGIS is a tourist product that is useful for the institutions directly concerned with the promotion of the territory; for the "natives", i.e. the citizens who often know little the area where they live, and for the eco-tourists visiting this wonderful land. The webGIS should not be neglected as an extraordinary tool of knowledge of the area (cultural heritage, landscape, environment for teaching in schools of all levels.

Correction: Using participatory design to develop (public health decision support systems through GIS

Directory of Open Access Journals (Sweden)

Sawada Michael

2007-11-01

Full Text Available Abstract Background Organizations that collect substantial data for decision-making purposes are often characterized as being 'data rich' but 'information poor'. Maps and mapping tools can be very useful for research transfer in converting locally collected data into information. Challenges involved in incorporating GIS applications into the decision-making process within the non-profit (public health sector include a lack of financial resources for software acquisition and training for non-specialists to use such tools. This on-going project has two primary phases. This paper critically reflects on Phase 1: the participatory design (PD process of developing a collaborative web-based GIS tool. Methods A case study design is being used whereby the case is defined as the data analyst and manager dyad (a two person team in selected Ontario Early Year Centres (OEYCs. Multiple cases are used to support the reliability of findings. With nine producer/user pair participants, the goal in Phase 1 was to identify barriers to map production, and through the participatory design process, develop a web-based GIS tool suited for data analysts and their managers. This study has been guided by the Ottawa Model of Research Use (OMRU conceptual framework. Results Due to wide variations in OEYC structures, only some data analysts used mapping software and there was no consistency or standardization in the software being used. Consequently, very little sharing of maps and data occurred among data analysts. Using PD, this project developed a web-based mapping tool (EYEMAP that was easy to use, protected proprietary data, and permit limited and controlled sharing between participants. By providing data analysts with training on its use, the project also ensured that data analysts would not break cartographic conventions (e.g. using a chloropleth map for count data. Interoperability was built into the web-based solution; that is, EYEMAP can read many different

L’analisi spaziale tramite GIS a supporto di filiere agroenergetiche

Directory of Open Access Journals (Sweden)

Flavio Lupia

2008-03-01

Full Text Available GIS spatial analysis in support of agroenergy developmentA feasibility study for an agro-energy district in the Latium region has been carried out using GIS tools to evaluate suitable areas for the cultivation of new energy crops for biofuel. This paper briefly describes the results of the sunflower land suitability analysis. The methodology used is based on crop suitability factors, cultivation constraints and GIS processing.The core processing is based on a multi-criteria analysis. The final result is a crop land suitability map.

Scaling-up Support for Emergency Response Organizations

NARCIS (Netherlands)

Oomes, A.H.J.; Neef, R.M.

2005-01-01

We present the design of an information system that supports the process of scaling-up of emergency response organizations. This process is vital for effective emergency response but tends to go awry in practice. Our proposed system consists of multiple distributed agents that are capable of

The use of GIS tools for road infrastructure safety management

Science.gov (United States)

Budzyński, Marcin; Kustra, Wojciech; Okraszewska, Romanika; Jamroz, Kazimierz; Pyrchla, Jerzy

2018-01-01

There are many factors that influence accidents and their severity. They can be grouped within the system of man, vehicle and environment. The article focuses on how GIS tools can be used to manage road infrastructure safety. To ensure a better understanding and identification of road factors, GIS tools help with the acquisition of road parameter data. Their other role is helping with a clear and effective presentation of risk ranking. GIS is key to identifying high-risk sections and supports the effective communication of safety levels. This makes it a vital element of safety management. The article describes the use of GIS for the collection and visualisation of road parameter data which are not available in any of the existing databases, i.e. horizontal curve parameters. As we know from research and statistics, they are important factors that determine the safety of road infrastructure. Finally, new research is proposed as well as the possibilities for applying GIS tools for the purposes of road safety inspection.

Online Decision Support System (IRODOS) - an emergency preparedness tool for handling offsite nuclear emergency

International Nuclear Information System (INIS)

Vinod Kumar, A.; Oza, R.B.; Chaudhury, P.; Suri, M.; Saindane, S.; Singh, K.D.; Bhargava, P.; Sharma, V.K.

2009-01-01

A real time online decision support system as a nuclear emergency response system for handling offsite nuclear emergency at the Nuclear Power Plants (NPPs) has been developed by Health, Safety and Environment Group, Bhabha Atomic Research Centre (BARC), Department of Atomic Energy (DAE) under the frame work of 'Indian Real time Online Decision Support System 'IRODOS'. (author)

GIS in Northern Ireland Secondary Schools: Mapping Where We Are Now

Science.gov (United States)

Roulston, Stephen

2013-01-01

A number of studies suggest that integrating Geographical Information Systems (GIS) into Geography teaching in schools has been and is challenging, and it seems that much of the early promise for the technology supporting learning in Geography has not been realised. This paper examines the progress made in Northern Ireland in implementing GIS in…

Tight-coupling of groundwater flow and transport modelling engines with spatial databases and GIS technology: a new approach integrating Feflow and ArcGIS

Directory of Open Access Journals (Sweden)

Ezio Crestaz

2012-09-01

Full Text Available Implementation of groundwater flow and transport numerical models is generally a challenge, time-consuming and financially-demanding task, in charge to specialized modelers and consulting firms. At a later stage, within clearly stated limits of applicability, these models are often expected to be made available to less knowledgeable personnel to support/design and running of predictive simulations within more familiar environments than specialized simulation systems. GIS systems coupled with spatial databases appear to be ideal candidates to address problem above, due to their much wider diffusion and expertise availability. Current paper discusses the issue from a tight-coupling architecture perspective, aimed at integration of spatial databases, GIS and numerical simulation engines, addressing both observed and computed data management, retrieval and spatio-temporal analysis issues. Observed data can be migrated to the central database repository and then used to set up transient simulation conditions in the background, at run time, while limiting additional complexity and integrity failure risks as data duplication during data transfer through proprietary file formats. Similarly, simulation scenarios can be set up in a familiar GIS system and stored to spatial database for later reference. As numerical engine is tightly coupled with the GIS, simulations can be run within the environment and results themselves saved to the database. Further tasks, as spatio-temporal analysis (i.e. for postcalibration auditing scopes, cartography production and geovisualization, can then be addressed using traditional GIS tools. Benefits of such an approach include more effective data management practices, integration and availability of modeling facilities in a familiar environment, streamlining spatial analysis processes and geovisualization requirements for the non-modelers community. Major drawbacks include limited 3D and time-dependent support in

Application of Geographic Information System (GIS to Model the Hydrocarbon Migration: Case Study from North-East Malay Basin, Malaysia

Directory of Open Access Journals (Sweden)

Rudini

2018-01-01

Full Text Available The purpose of this study is to model the migration of hydrocarbon using Geographic Information System (GIS. Understanding hydrocarbon migration is important since it can mean the difference between success and failure in oil and gas exploration project. The hydrocarbon migration modeling using geophysical method is still not accurate due to the limitations of available data. In recent years, GIS has emerged as a powerful tool for subsurface mapping and analysis. Recent studies have been carried out about the abilities of GIS to model hydrocarbon migration. Recent advances in GIS support the establishment and monitoring of prediction hydrocarbon migration. The concept, model, and calculation are based on the current geological situation. The spatial data of hydrocarbon reservoirs is determined by its geometry of lithology and geophysical attributes. Top of Group E horizon of north-east Malay basin was selected as the study area due to the occurrence of hydrocarbon migration. Spatial data and attributes data such as seismic data, wells log data and lithology were acquired and processed. Digital Elevation Model (DEM was constructed from the selected horizon as a result of seismic interpretation using the Petrel software. Furthermore, DEM was processed in ArcGIS as a base map to shown hydrocarbon migration in north-east Malay Basin. Finally, all the data layers were overlaid to produce a map of hydrocarbon migration. A good data was imported to verify the model is correct.

Application of Geographic Information System (GIS) to Model the Hydrocarbon Migration: Case Study from North-East Malay Basin, Malaysia

Science.gov (United States)

Rudini; Nasir Matori, Abd; Talib, Jasmi Ab; Balogun, Abdul-Lateef

2018-03-01

The purpose of this study is to model the migration of hydrocarbon using Geographic Information System (GIS). Understanding hydrocarbon migration is important since it can mean the difference between success and failure in oil and gas exploration project. The hydrocarbon migration modeling using geophysical method is still not accurate due to the limitations of available data. In recent years, GIS has emerged as a powerful tool for subsurface mapping and analysis. Recent studies have been carried out about the abilities of GIS to model hydrocarbon migration. Recent advances in GIS support the establishment and monitoring of prediction hydrocarbon migration. The concept, model, and calculation are based on the current geological situation. The spatial data of hydrocarbon reservoirs is determined by its geometry of lithology and geophysical attributes. Top of Group E horizon of north-east Malay basin was selected as the study area due to the occurrence of hydrocarbon migration. Spatial data and attributes data such as seismic data, wells log data and lithology were acquired and processed. Digital Elevation Model (DEM) was constructed from the selected horizon as a result of seismic interpretation using the Petrel software. Furthermore, DEM was processed in ArcGIS as a base map to shown hydrocarbon migration in north-east Malay Basin. Finally, all the data layers were overlaid to produce a map of hydrocarbon migration. A good data was imported to verify the model is correct.

Development and challenges of using web-based GIS for health applications

DEFF Research Database (Denmark)

Gao, Sheng; Mioc, Darka; Boley, Harold

2011-01-01

Web-based GIS is increasingly used in health applications. It has the potential to provide critical information in a timely manner, support health care policy development, and educate decision makers and the general public. This paper describes the trends and recent development of health...... applications using a Web-based GIS. Recent progress on the database storage and geospatial Web Services has advanced the use of Web-based GIS for health applications, with various proprietary software, open source software, and Application Programming Interfaces (APIs) available. Current challenges in applying...... care planning, and public health participation....

Geographic Information System (GIS) capabilities in traffic accident information management: a qualitative approach.

Science.gov (United States)

Ahmadi, Maryam; Valinejadi, Ali; Goodarzi, Afshin; Safari, Ameneh; Hemmat, Morteza; Majdabadi, Hesamedin Askari; Mohammadi, Ali

2017-06-01

Traffic accidents are one of the more important national and international issues, and their consequences are important for the political, economical, and social level in a country. Management of traffic accident information requires information systems with analytical and accessibility capabilities to spatial and descriptive data. The aim of this study was to determine the capabilities of a Geographic Information System (GIS) in management of traffic accident information. This qualitative cross-sectional study was performed in 2016. In the first step, GIS capabilities were identified via literature retrieved from the Internet and based on the included criteria. Review of the literature was performed until data saturation was reached; a form was used to extract the capabilities. In the second step, study population were hospital managers, police, emergency, statisticians, and IT experts in trauma, emergency and police centers. Sampling was purposive. Data was collected using a questionnaire based on the first step data; validity and reliability were determined by content validity and Cronbach's alpha of 75%. Data was analyzed using the decision Delphi technique. GIS capabilities were identified in ten categories and 64 sub-categories. Import and process of spatial and descriptive data and so, analysis of this data were the most important capabilities of GIS in traffic accident information management. Storing and retrieving of descriptive and spatial data, providing statistical analysis in table, chart and zoning format, management of bad structure issues, determining the cost effectiveness of the decisions and prioritizing their implementation were the most important capabilities of GIS which can be efficient in the management of traffic accident information.

Gis-Based Smart Cartography Using 3d Modeling

Science.gov (United States)

Malinverni, E. S.; Tassetti, A. N.

2013-08-01

3D City Models have evolved to be important tools for urban decision processes and information systems, especially in planning, simulation, analysis, documentation and heritage management. On the other hand existing and in use numerical cartography is often not suitable to be used in GIS because not geometrically and topologically correctly structured. The research aim is to 3D structure and organize a numeric cartography for GIS and turn it into CityGML standardized features. The work is framed around a first phase of methodological analysis aimed to underline which existing standard (like ISO and OGC rules) can be used to improve the quality requirement of a cartographic structure. Subsequently, from this technical specifics, it has been investigated the translation in formal contents, using an owner interchange software (SketchUp), to support some guide lines implementations to generate a GIS3D structured in GML3. It has been therefore predisposed a test three-dimensional numerical cartography (scale 1:500, generated from range data captured by 3D laser scanner), tested on its quality according to the previous standard and edited when and where necessary. Cad files and shapefiles are converted into a final 3D model (Google SketchUp model) and then exported into a 3D city model (CityGML LoD1/LoD2). The GIS3D structure has been managed in a GIS environment to run further spatial analysis and energy performance estimate, not achievable in a 2D environment. In particular geometrical building parameters (footprint, volume etc.) are computed and building envelop thermal characteristics are derived from. Lastly, a simulation is carried out to deal with asbestos and home renovating charges and show how the built 3D city model can support municipal managers with risk diagnosis of the present situation and development of strategies for a sustainable redevelop.

An Ontology-Based GIS for Genomic Data Management of Rumen Microbes

Directory of Open Access Journals (Sweden)

Saber Jelokhani-Niaraki

2015-03-01

Full Text Available During recent years, there has been exponential growth in biological information. With the emergence of large datasets in biology, life scientists are encountering bottlenecks in handling the biological data. This study presents an integrated geographic information system (GIS-ontology application for handling microbial genome data. The application uses a linear referencing technique as one of the GIS functionalities to represent genes as linear events on the genome layer, where users can define/change the attributes of genes in an event table and interactively see the gene events on a genome layer. Our application adopted ontology to portray and store genomic data in a semantic framework, which facilitates data-sharing among biology domains, applications, and experts. The application was developed in two steps. In the first step, the genome annotated data were prepared and stored in a MySQL database. The second step involved the connection of the database to both ArcGIS and Protégé as the GIS engine and ontology platform, respectively. We have designed this application specifically to manage the genome-annotated data of rumen microbial populations. Such a GIS-ontology application offers powerful capabilities for visualizing, managing, reusing, sharing, and querying genome-related data.

An Ontology-Based GIS for Genomic Data Management of Rumen Microbes

Science.gov (United States)

Jelokhani-Niaraki, Saber; Minuchehr, Zarrin; Nassiri, Mohammad Reza

2015-01-01

During recent years, there has been exponential growth in biological information. With the emergence of large datasets in biology, life scientists are encountering bottlenecks in handling the biological data. This study presents an integrated geographic information system (GIS)-ontology application for handling microbial genome data. The application uses a linear referencing technique as one of the GIS functionalities to represent genes as linear events on the genome layer, where users can define/change the attributes of genes in an event table and interactively see the gene events on a genome layer. Our application adopted ontology to portray and store genomic data in a semantic framework, which facilitates data-sharing among biology domains, applications, and experts. The application was developed in two steps. In the first step, the genome annotated data were prepared and stored in a MySQL database. The second step involved the connection of the database to both ArcGIS and Protégé as the GIS engine and ontology platform, respectively. We have designed this application specifically to manage the genome-annotated data of rumen microbial populations. Such a GIS-ontology application offers powerful capabilities for visualizing, managing, reusing, sharing, and querying genome-related data. PMID:25873847

Towards integrated crisis support of regional emergency networks.

Science.gov (United States)

Caro, D H

1999-01-01

Emergency and crisis management pose multidimensional information systems challenges for communities across North America. In the quest to reduce mortality and morbidity risks and to increase the level of crisis preparedness, regional emergency management networks have evolved. Integrated Crisis Support Systems (ICSS) are enabling information technologies that assist emergency managers by enhancing the ability to strategically manage and control these regional emergency networks efficiently and effectively. This article underscores the ICCS development, control and leadership issues and their promising implications for regional emergency management networks.

BIM and IoT: A Synopsis from GIS Perspective

Science.gov (United States)

Isikdag, U.

2015-10-01

Internet-of-Things (IoT) focuses on enabling communication between all devices, things that are existent in real life or that are virtual. Building Information Models (BIMs) and Building Information Modelling is a hype that has been the buzzword of the construction industry for last 15 years. BIMs emerged as a result of a push by the software companies, to tackle the problems of inefficient information exchange between different software and to enable true interoperability. In BIM approach most up-to-date an accurate models of a building are stored in shared central databases during the design and the construction of a project and at post-construction stages. GIS based city monitoring / city management applications require the fusion of information acquired from multiple resources, BIMs, City Models and Sensors. This paper focuses on providing a method for facilitating the GIS based fusion of information residing in digital building "Models" and information acquired from the city objects i.e. "Things". Once this information fusion is accomplished, many fields ranging from Emergency Response, Urban Surveillance, Urban Monitoring to Smart Buildings will have potential benefits.

Format conversion between CAD data and GIS data based on ArcGIS

Science.gov (United States)

Xie, Qingqing; Wei, Bo; Zhang, Kailin; Wang, Zhichao

2015-12-01

To make full use of the data resources and realize a sharing for the different types of data in different industries, a method of format conversion between CAD data and GIS data based on ArcGIS was proposed. To keep the integrity of the converted data, some key steps to process CAD data before conversion were made in AutoCAD. For examples, deleting unnecessary elements such as title, border and legend avoided the appearance of unnecessary elements after conversion, as layering data again by a national standard avoided the different types of elements to appear in a same layer after conversion. In ArcGIS, converting CAD data to GIS data was executed by the correspondence of graphic element classification between AutoCAD and ArcGIS. In addition, an empty geographic database and feature set was required to create in ArcGIS for storing the text data of CAD data. The experimental results show that the proposed method avoids a large amount of editing work in data conversion and maintains the integrity of spatial data and attribute data between before and after conversion.

[Applications of GIS in biomass energy source research].

Science.gov (United States)

Su, Xian-Ming; Wang, Wu-Kui; Li, Yi-Wei; Sun, Wen-Xiang; Shi, Hai; Zhang, Da-Hong

2010-03-01

Biomass resources have the characteristics of widespread and dispersed distribution, which have close relations to the environment, climate, soil, and land use, etc. Geographic information system (GIS) has the functions of spatial analysis and the flexibility of integrating with other application models and algorithms, being of predominance to the biomass energy source research. This paper summarized the researches on the GIS applications in biomass energy source research, with the focus in the feasibility study of bioenergy development, assessment of biomass resources amount and distribution, layout of biomass exploitation and utilization, evaluation of gaseous emission from biomass burning, and biomass energy information system. Three perspectives of GIS applications in biomass energy source research were proposed, i. e., to enrich the data source, to improve the capacity on data processing and decision-support, and to generate the online proposal.

GIS Technology and E-Learning for Exposing College Graduates to Transcultural Education

Science.gov (United States)

Kalra, Rajrani; Gupta, Vipin

2014-01-01

In recent years, one form of technology that has become quite popular in schools and higher education is the Geographical Information Systems (GIS). GIS is one kind of management information system. It includes both the hardware and software components and includes programming of real world problems. It provides support to managers in day-to-day…

Smart facility location planning for Smart Cities: using GIS technology and facility provision standards for pro-active planning of social facilities to support smart growth

CSIR Research Space (South Africa)

Green, Chéri

2016-08-01

Full Text Available step toward “smart” planning processes to support smart cities of the future. A case study application in Cape Town is used to illustrate the application of the methodology of spatially matching supply and demand for facilities using GIS tools...

A remote sensing and GIS-enabled highway asset management system : final report.

Science.gov (United States)

2016-04-01

The objective of this project is to validate the use of commercial remote sensing and spatial information : (CRS&SI) technologies, including emerging 3D line laser imaging technology, mobile LiDAR, image : processing algorithms, and GPS/GIS technolog...

Geographic Information System (GIS) capabilities in traffic accident information management: a qualitative approach

Science.gov (United States)

Ahmadi, Maryam; Valinejadi, Ali; Goodarzi, Afshin; Safari, Ameneh; Hemmat, Morteza; Majdabadi, Hesamedin Askari; Mohammadi, Ali

2017-01-01

Background Traffic accidents are one of the more important national and international issues, and their consequences are important for the political, economical, and social level in a country. Management of traffic accident information requires information systems with analytical and accessibility capabilities to spatial and descriptive data. Objective The aim of this study was to determine the capabilities of a Geographic Information System (GIS) in management of traffic accident information. Methods This qualitative cross-sectional study was performed in 2016. In the first step, GIS capabilities were identified via literature retrieved from the Internet and based on the included criteria. Review of the literature was performed until data saturation was reached; a form was used to extract the capabilities. In the second step, study population were hospital managers, police, emergency, statisticians, and IT experts in trauma, emergency and police centers. Sampling was purposive. Data was collected using a questionnaire based on the first step data; validity and reliability were determined by content validity and Cronbach’s alpha of 75%. Data was analyzed using the decision Delphi technique. Results GIS capabilities were identified in ten categories and 64 sub-categories. Import and process of spatial and descriptive data and so, analysis of this data were the most important capabilities of GIS in traffic accident information management. Conclusion Storing and retrieving of descriptive and spatial data, providing statistical analysis in table, chart and zoning format, management of bad structure issues, determining the cost effectiveness of the decisions and prioritizing their implementation were the most important capabilities of GIS which can be efficient in the management of traffic accident information. PMID:28848627

GIS Methodology for Planning Planetary-Rover Operations

Science.gov (United States)

Powell, Mark; Norris, Jeffrey; Fox, Jason; Rabe, Kenneth; Shu, I-Hsiang

2007-01-01

A document describes a methodology for utilizing image data downlinked from cameras aboard a robotic ground vehicle (rover) on a remote planet for analyzing and planning operations of the vehicle and of any associated spacecraft. Traditionally, the cataloging and presentation of large numbers of downlinked planetary-exploration images have been done by use of two organizational methods: temporal organization and correlation between activity plans and images. In contrast, the present methodology involves spatial indexing of image data by use of the computational discipline of geographic information systems (GIS), which has been maturing in terrestrial applications for decades, but, until now, has not been widely used in support of exploration of remote planets. The use of GIS to catalog data products for analysis is intended to increase efficiency and effectiveness in planning rover operations, just as GIS has proven to be a source of powerful computational tools in such terrestrial endeavors as law enforcement, military strategic planning, surveying, political science, and epidemiology. The use of GIS also satisfies the need for a map-based user interface that is intuitive to rover-activity planners, many of whom are deeply familiar with maps and know how to use them effectively in field geology.

Automation technology using Geographic Information System (GIS)

Science.gov (United States)

Brooks, Cynthia L.

1994-01-01

Airport Surface Movement Area is but one of the actions taken to increase the capacity and safety of existing airport facilities. The System Integration Branch (SIB) has designed an integrated system consisting of an electronic moving display in the cockpit, and includes display of taxi routes which will warn controllers and pilots of the position of other traffic and warning information automatically. Although, this system has in test simulation proven to be accurate and helpful; the initial process of obtaining an airport layout of the taxi-routes and designing each of them is a very tedious and time-consuming process. Other methods of preparing the display maps are being researched. One such method is the use of the Geographical Information System (GIS). GIS is an integrated system of computer hardware and software linking topographical, demographic and other resource data that is being referenced. The software can support many areas of work with virtually unlimited information compatibility due to the system's open architecture. GIS will allow us to work faster with increased efficiency and accuracy while providing decision making capabilities. GIS is currently being used at the Langley Research Center with other applications and has been validated as an accurate system for that task. GIS usage for our task will involve digitizing aerial photographs of the topology for each taxi-runway and identifying each position according to its specific spatial coordinates. The information currently being used can be integrated with the GIS system, due to its ability to provide a wide variety of user interfaces. Much more research and data analysis will be needed before this technique will be used, however we are hopeful this will lead to better usage of man-power and technological capabilities for the future.

Putting Chronic Disease on the Map: Building GIS Capacity in State and Local Health Departments

Science.gov (United States)

Casper, Michele; Tootoo, Joshua; Schieb, Linda

2013-01-01

Techniques based on geographic information systems (GIS) have been widely adopted and applied in the fields of infectious disease and environmental epidemiology; their use in chronic disease programs is relatively new. The Centers for Disease Control and Prevention’s Division for Heart Disease and Stroke Prevention is collaborating with the National Association of Chronic Disease Directors and the University of Michigan to provide health departments with capacity to integrate GIS into daily operations, which support priorities for surveillance and prevention of chronic diseases. So far, 19 state and 7 local health departments participated in this project. On the basis of these participants’ experiences, we describe our training strategy and identify high-impact GIS skills that can be mastered and applied over a short time in support of chronic disease surveillance. We also describe the web-based resources in the Chronic Disease GIS Exchange that were produced on the basis of this training and are available to anyone interested in GIS and chronic disease (www.cdc.gov/DHDSP/maps/GISX). GIS offers diverse sets of tools that promise increased productivity for chronic disease staff of state and local health departments. PMID:23786907

Putting chronic disease on the map: building GIS capacity in state and local health departments.

Science.gov (United States)

Miranda, Marie Lynn; Casper, Michele; Tootoo, Joshua; Schieb, Linda

2013-06-20

Techniques based on geographic information systems (GIS) have been widely adopted and applied in the fields of infectious disease and environmental epidemiology; their use in chronic disease programs is relatively new. The Centers for Disease Control and Prevention's Division for Heart Disease and Stroke Prevention is collaborating with the National Association of Chronic Disease Directors and the University of Michigan to provide health departments with capacity to integrate GIS into daily operations, which support priorities for surveillance and prevention of chronic diseases. So far, 19 state and 7 local health departments participated in this project. On the basis of these participants' experiences, we describe our training strategy and identify high-impact GIS skills that can be mastered and applied over a short time in support of chronic disease surveillance. We also describe the web-based resources in the Chronic Disease GIS Exchange that were produced on the basis of this training and are available to anyone interested in GIS and chronic disease (www.cdc.gov/DHDSP/maps/GISX). GIS offers diverse sets of tools that promise increased productivity for chronic disease staff of state and local health departments.

Initiating informatics and GIS support for a field investigation of Bioterrorism: The New Jersey anthrax experience

Directory of Open Access Journals (Sweden)

Skinner Ric

2003-11-01

Full Text Available Abstract Background The investigation of potential exposure to anthrax spores in a Trenton, New Jersey, mail-processing facility required rapid assessment of informatics needs and adaptation of existing informatics tools to new physical and information-processing environments. Because the affected building and its computers were closed down, data to list potentially exposed persons and map building floor plans were unavailable from the primary source. Results Controlling the effects of anthrax contamination required identification and follow-up of potentially exposed persons. Risk of exposure had to be estimated from the geographic relationship between work history and environmental sample sites within the contaminated facility. To assist in establishing geographic relationships, floor plan maps of the postal facility were constructed in ArcView Geographic Information System (GIS software and linked to a database of personnel and visitors using Epi Info and Epi Map 2000. A repository for maintaining the latest versions of various documents was set up using Web page hyperlinks. Conclusions During public health emergencies, such as bioterrorist attacks and disease epidemics, computerized information systems for data management, analysis, and communication may be needed within hours of beginning the investigation. Available sources of data and output requirements of the system may be changed frequently during the course of the investigation. Integrating data from a variety of sources may require entering or importing data from a variety of digital and paper formats. Spatial representation of data is particularly valuable for assessing environmental exposure. Written documents, guidelines, and memos important to the epidemic were frequently revised. In this investigation, a database was operational on the second day and the GIS component during the second week of the investigation.

Research on Livable Community Evaluation Based on GIS

Science.gov (United States)

Yin, Zhangcai; Wu, Yang; Jin, Zhanghaonan; Zhang, Xu

2018-01-01

Community is the basic unit of the city. Research on livable community could provide a bottom-up research path for the realization of livable city. Livability is the total factor affecting the quality of community life. In this paper, livable community evaluation indexes are evaluated based on GIS and fuzzy comprehensive evaluation method. Then the sum-index and sub-index of community livability are both calculated. And community livable evaluation index system is constructed based on the platform of GIS. This study provides theoretical support for the construction and management of livable communities, so as to guide the development and optimization of city.

Teaching with ArcGIS Pro

OpenAIRE

Theller, Larry

2016-01-01

For Fall semester 2016 the ABE department moved the course ASM 540 Basic GIS from ArcGIS Desktop 10.2 to ArcGIS Pro 1.3. This software from ESRI has a completely new look and feel, (ribbon-based rather than cascading menus) and is a true 64 bit application, capable of multi-threading, and built on Python 3. After ArcGIS Desktop 10.5 is released, desktop ends and the future release will be ArcGIS Pro; so it makes sense to switch sooner rather than later. This talk will discuss some issues and...

Archeology and GIS

Directory of Open Access Journals (Sweden)

Janez Dular

1992-12-01

Full Text Available Concepts of spatial and landscape archaeologu have been accepted within Stepene archaeology for a decade. These concepts are based on the assumption  that man, by his diverse activities, made a tremendous impact on the landscape as a whole. Therefore in the research of archaeological settlement patterns, the whole landscape should be observed and analgzed. Diverse techniques of archaeological survey for data collection were developed and theoretical concepts for interpretation of those data were adapted from geographg, but onlg by applying GIS technology were this concepts made accessible to ali archaeologists. Basic concepts for GIS applications were defined in the research project "The Genesis of the cultural landscape" at the Department of Archaeology of the University of Ljubljana. However, the Hvar Project, as the first archaeological čase study, played the crucial role in acceptance of GIS technology. The analyses were concentrated on the possibilities of GIS applications in archaeo logical analysis. The best results were achieved in definition of archaeological site territories, subsistence strategies, communications and trade analyses. Few regional čase studies were started this gear because it is to be expected that soon the majoritg of the GIS archaeological applications will be in protection and management of cultural heritage. Simultaneously the Institute for Archaeology at the Slovene Academy of Sciences and Art has started with the computerization of the site and monuments database which will be integrated into the state GIS.

The Seismic Analysis of 800kV Gas Insulated Switchgear (GIS) for the Dangjin Thermal Plant

Energy Technology Data Exchange (ETDEWEB)

Shin, I.H.; Song, W.P.; Kweon, K.Y. [Hyosung Corporation (Korea)

1999-05-01

800kV GIS (Gas Insulated Switchgear) which was first developed in korea at Dec. 1998 and is going to be installed in the dangjin thermal plant. We checked the stability of 800kV GIS under seismic load. pro-ENGINEER and PATRAN were used for modeling exactly 800kV GIS geometry. The 800kV GIS was modeled as shell elements for the enclosures and beam elements for the conductors and the support insulators. (author). 2 refs., 9 figs., 2 tabs.

IMPLEMENTATION OF GIS-BASED MULTICRITERIA DECISION ANALYSIS WITH VB IN ArcGIS

OpenAIRE

DERYA OZTURK; FATMAGUL BATUK

2011-01-01

This article focuses on the integration of multicriteria decision analysis (MCDA) and geographical information systems (GIS) and introduces a tool, GIS–MCDA, written in visual basic in ArcGIS for GIS-based MCDA. The GIS–MCDA deals with raster-based data sets and includes standardization, weighting and decision analysis methods, and sensitivity analysis. Simple additive weighting, weighted product method, technique for order preference by similarity to ideal solution, compromise programming, a...

WebGIS Platform Adressed to Forest Fire Management Methodologies

Science.gov (United States)

André Ramos-Simões, Nuno; Neto Paixão, Helena Maria; Granja Martins, Fernando Miguel; Pedras, Celestina; Lança, Rui; Silva, Elisa; Jordán, António; Zavala, Lorena; Soares, Cristina

2015-04-01

Forest fires are one of the natural disasters that causes more damages in nature, as well as high material costs, and sometimes, a significant losses in human lives. In summer season, when high temperatures are attained, fire may rapidly progress and destroy vast areas of forest and also rural and urban areas. The forest fires have effect on forest species, forest composition and structure, soil properties and soil capacity for nutrient retention. In order to minimize the negative impact of the forest fires in the environment, many studies have been developed, e.g. Jordán et al (2009), Cerdà & Jordán (2010), and Gonçalves & Vieira (2013). Nowadays, Remote Sensing (RS) and Geographic Information System (GIS) technologies are used as support tools in fire management decisions, namely during the fire, but also before and after. This study presents the development of a user-friendly WebGIS dedicated to share data, maps and provide updated information on forest fire management for stakeholders in Iberia Peninsula. The WebGIS platform was developed with ArcGIS Online, ArcGIS for Desktop; HyperText Markup Language (HTML) and Javascript. This platform has a database that includes spatial and alphanumeric information, such as: origin, burned areas, vegetation change over time, terrain natural slope, land use, soil erosion and fire related hazards. The same database contains also the following relevant information: water sources, forest tracks and traffic ways, lookout posts and urban areas. The aim of this study is to provide the authorities with a tool to assess risk areas and manage more efficiently forest fire hazards, giving more support to their decisions and helping the populations when facing this kind of phenomena.

A GIS-Based Procedure for Landslide Intensity Evaluation and Specific risk Analysis Supported by Persistent Scatterers Interferometry (PSI

Directory of Open Access Journals (Sweden)

Silvia Bianchini

2017-10-01

Full Text Available The evaluation of landslide specific risk, defined as the expected degree of loss due to landslides, requires the parameterization and the combination of a number of socio-economic and geological factors, which often needs the interaction of different skills and expertise (geologists, engineers, planners, administrators, etc.. The specific risk sub-components, i.e., hazard and vulnerability of elements at risk, can be determined with different levels of detail depending on the available auxiliary data and knowledge of the territory. These risk factors are subject to short-term variations and nowadays turn out to be easily mappable and evaluable through remotely sensed data and GIS (Geographic Information System tools. In this work, we propose a qualitative approach at municipal scale for producing a “specific risk” map, supported by recent satellite PSI (Persistent Scatterer Interferometry data derived from SENTINEL-1 C-band images in the spanning time 2014–2017, implemented in a GIS environment. In particular, PSI measurements are useful for the updating of a landslide inventory map of the area of interest and are exploited for the zonation map of the intensity of ground movements, needed for evaluating the vulnerability over the study area. Our procedure is presented throughout the application to the Volterra basin and the output map could be useful to support the local authorities with updated basic information required for environmental knowledge and planning at municipal level. Moreover, the proposed procedure is easily managed and repeatable in other case studies, as well as exploiting different SAR sensors in L- or X-band.

Surface deformation monitoring of Sinabung volcano using multi temporal InSAR method and GIS analysis for affected area assessment

Science.gov (United States)

Aditiya, A.; Aoki, Y.; Anugrah, R. D.

2018-04-01

Sinabung Volcano which located in northern part of Sumatera island is part of a hundred active volcano in Indonesia. Surface deformation is detected over Sinabung Volcano and surrounded area since the first eruption in 2010 after 400 years long rest. We present multi temporal Interferometric Synthetic Aperture Radar (InSAR) time-series method of ALOS-2 L-band SAR data acquired from December 2014 to July 2017 to reveal surface deformation with high spatial resolution. The method includes focusing the SAR data, generating interferogram and phase unwrapping using SNAPHU tools. The result reveal significant deformation over Sinabung Volcano areas at rates up to 10 cm during observation period and the highest deformation occurs in western part which is trajectory of lava. We concluded the observed deformation primarily caused by volcanic activity respectively after long period of rest. In addition, Geographic Information System (GIS) analysis produces disaster affected areas of Sinabung eruption. GIS is reliable technique to estimate the impact of the hazard scenario to the exposure data and develop scenarios of disaster impacts to inform their contingency and emergency plan. The GIS results include the estimated affected area divided into 3 zones based on pyroclastic lava flow and pyroclastic fall (incandescent rock and ash). The highest impact is occurred in zone II due to many settlements are scattered in this zone. This information will be support stakeholders to take emergency preparation for disaster reduction. The continuation of this high rate of decline tends to endanger the population in next periods.

Application of geographic information system for emergency management

International Nuclear Information System (INIS)

Best, R.G.; Guber, A.L.; Kliman, D.H.

1991-01-01

One of the responsibilities of the DOE Nevada Operations Office, under the Federal Radiological Emergency Response Plan (FRERP) and the Aerial Measuring System (AMS) program, is the acquisition and analysis of radiological and associated environmental data. Much of the data are in the form of maps, tabular summaries, and vertical imagery. It is critical that these data be rapidly compiled into a common format in order to make accurate observations and informed decisions. This data management task is both large and complex. Within the Federal Radiological Monitoring and Assessment Center (FRMAC) there is a continuing effort to improve the data management and communication process. The most recent addition to this essential function has been the development and testing of a deployable Digital Image Processing (IP) / Geographic Information System (GIS). To demonstrate the potential of GIS for emergency response, the system was utilized at an interagency post-emergency table top exercise. A geographic database, consisting of 27 coregistered ''layers'' of cultural, radiological, satellite image,and environmental data was developed for the area within a 50-mile radius of the River Bend Station in Louisiana. In support of the exercise, maps and real time displays of individual layers and combinations of layers were produced to determine the impact of a hypothetical radiological release and to develop mitigation plans. 3 refs., 2 figs

GIS coupled Multiple Criteria based Decision Support for Classification of Urban Coastal Areas in India

Science.gov (United States)

Dhiman, R.; Kalbar, P.; Inamdar, A. B.

2017-12-01

Coastal area classification in India is a challenge for federal and state government agencies due to fragile institutional framework, unclear directions in implementation of costal regulations and violations happening at private and government level. This work is an attempt to improvise the objectivity of existing classification methods to synergies the ecological systems and socioeconomic development in coastal cities. We developed a Geographic information system coupled Multi-criteria Decision Making (GIS-MCDM) approach to classify urban coastal areas where utility functions are used to transform the costal features into quantitative membership values after assessing the sensitivity of urban coastal ecosystem. Furthermore, these membership values for costal features are applied in different weighting schemes to derive Coastal Area Index (CAI) which classifies the coastal areas in four distinct categories viz. 1) No Development Zone, 2) Highly Sensitive Zone, 3) Moderately Sensitive Zone and 4) Low Sensitive Zone based on the sensitivity of urban coastal ecosystem. Mumbai, a coastal megacity in India is used as case study for demonstration of proposed method. Finally, uncertainty analysis using Monte Carlo approach to validate the sensitivity of CAI under specific multiple scenarios is carried out. Results of CAI method shows the clear demarcation of coastal areas in GIS environment based on the ecological sensitivity. CAI provides better decision support for federal and state level agencies to classify urban coastal areas according to the regional requirement of coastal resources considering resilience and sustainable development. CAI method will strengthen the existing institutional framework for decision making in classification of urban coastal areas where most effective coastal management options can be proposed.

APPLICATION OF GIS AND MATHEMATICAL MODELING IN MARITIME CRISIS SITUATIONS

Directory of Open Access Journals (Sweden)

Nenad Mladineo

2010-12-01

Full Text Available This paper aims to propose a decision support system for maritime crisis situation, due to fact that Croatia has decided to implement Directive 2002/59/EC to define places of refuge for ships in need of assistance off their coasts, or to develop techniques for providing assistance to such ships. In order to fulfill this Directive it is necessary to build an effective Decision Support System (DSS based on GIS and mathematical modeling. The basic module of the proposed system is GIS, for all levels of DSS, that comprise information subsystems about spatial and other data and serves the other modules with data and information. Starting points for analysis are shipping corridors, and 380 potential locations for places of refuge designated in the official navigational pilot book. Multicriteria analysis, with GIS-generated input data, has been used to establish "worthiness" of a place of refuge for each ship category, taking into account kinds of accident. Proposed mathematical models facilitate optimal usage of "available intervention resources".

A Decision Support System for Business Location Based on Open GIS Technology and Data

Directory of Open Access Journals (Sweden)

Cornel Ghita

2014-06-01

Full Text Available This article presents the architecture, features, and operating mode of a DSS (Decision Support System aiming to assist entrepreneurs and managers in the process of location decision making. The research assembled concepts derived from theory, findings of empirical studies, together with open GIS (Geographical Information System software and data, and modelled them into a DSS software tool, according to an original methodology and design. The users are guided step-by-step to input information on their businesses into the DSS (industry, preferences for land-use areas and facility types, weights of key location factors, and are returned two sets of results: one based on own options, and another one aggregate for the industry they operate in. The results consist in the top five locations for the user's firm, as well as for the industry, depicted both in a graphical report (map and a text report (explanation of results.

Developing Library GIS Services for Humanities and Social Science: An Action Research Approach

Science.gov (United States)

Kong, Ningning; Fosmire, Michael; Branch, Benjamin Dewayne

2017-01-01

In the academic libraries' efforts to support digital humanities and social science, GIS service plays an important role. However, there is no general service model existing about how libraries can develop GIS services to best engage with digital humanities and social science. In this study, we adopted the action research method to develop and…

Teaching Tectonics to Undergraduates with Web GIS

Science.gov (United States)

Anastasio, D. J.; Bodzin, A.; Sahagian, D. L.; Rutzmoser, S.

2013-12-01

Geospatial reasoning skills provide a means for manipulating, interpreting, and explaining structured information and are involved in higher-order cognitive processes that include problem solving and decision-making. Appropriately designed tools, technologies, and curriculum can support spatial learning. We present Web-based visualization and analysis tools developed with Javascript APIs to enhance tectonic curricula while promoting geospatial thinking and scientific inquiry. The Web GIS interface integrates graphics, multimedia, and animations that allow users to explore and discover geospatial patterns that are not easily recognized. Features include a swipe tool that enables users to see underneath layers, query tools useful in exploration of earthquake and volcano data sets, a subduction and elevation profile tool which facilitates visualization between map and cross-sectional views, drafting tools, a location function, and interactive image dragging functionality on the Web GIS. The Web GIS platform is independent and can be implemented on tablets or computers. The GIS tool set enables learners to view, manipulate, and analyze rich data sets from local to global scales, including such data as geology, population, heat flow, land cover, seismic hazards, fault zones, continental boundaries, and elevation using two- and three- dimensional visualization and analytical software. Coverages which allow users to explore plate boundaries and global heat flow processes aided learning in a Lehigh University Earth and environmental science Structural Geology and Tectonics class and are freely available on the Web.

ARAC: A support capability for emergency managers

Energy Technology Data Exchange (ETDEWEB)

Pace, J.C.; Sullivan, T.J.; Baskett, R.L. [and others

1995-08-01

This paper is intended to introduce to the non-radiological emergency management community the 20-year operational history of the Atmospheric Release Advisory Capability (ARAC), its concept of operations, and its applicability for use in support of emergency management decision makers. ARAC is a centralized federal facility for assessing atmospheric releases of hazardous materials in real time, using a robust suite of three-dimensional atmospheric transport and diffusion models, extensive geophysical and source-description databases, automated meteorological data acquisition systems, and experienced staff members. Although originally conceived to respond to nuclear accidents, the ARAC system has proven to be extremely adaptable, and has been used successfully during a wide variety of nonradiological hazardous chemical situations. ARAC represents a proven, validated, operational support capability for atmospheric hazardous releases.

A Generic Framework for Using Multi-Dimensional Earth Observation Data in GIS

Directory of Open Access Journals (Sweden)

Yunfeng Jiang

2016-05-01

Full Text Available Earth Observation (EO data are critical for many Geographic Information System (GIS-based decision support systems to provide factual information. However, it is challenging for GIS to understand traditional EO data formats (e.g., Hierarchical Data Format (HDF given the different contents and formats in the two domains. To address this gap between EO data and GIS, the barriers and strategies of integrating various types of EO data with GIS are explored, especially with the popular Geospatial Data Abstraction Library (GDAL that is used by many GISs to access EO data. The research investigates four key technical aspects: (i designing a generic plug-in framework for consuming different types of EO data; (ii implementing the framework to fix the errors in GIS when using GDAL to understand EO data; and (iii developing extension for commercial and open source GIS (i.e., ArcGIS and QGIS to demonstrate the usability of the proposed framework and its implementation in GDAL. A series of EO data products collected from NASA’s Atmospheric Scientific Data Center (ASDC are used in the tests and the results prove the proposed framework is efficient to solve different problems in interpreting EO data without compromising their original content.

BIM and IoT: A Synopsis from GIS Perspective

Directory of Open Access Journals (Sweden)

U. Isikdag

2015-10-01

Full Text Available Internet-of-Things (IoT focuses on enabling communication between all devices, things that are existent in real life or that are virtual. Building Information Models (BIMs and Building Information Modelling is a hype that has been the buzzword of the construction industry for last 15 years. BIMs emerged as a result of a push by the software companies, to tackle the problems of inefficient information exchange between different software and to enable true interoperability. In BIM approach most up-to-date an accurate models of a building are stored in shared central databases during the design and the construction of a project and at post-construction stages. GIS based city monitoring / city management applications require the fusion of information acquired from multiple resources, BIMs, City Models and Sensors. This paper focuses on providing a method for facilitating the GIS based fusion of information residing in digital building “Models” and information acquired from the city objects i.e. “Things”. Once this information fusion is accomplished, many fields ranging from Emergency Response, Urban Surveillance, Urban Monitoring to Smart Buildings will have potential benefits.

GIS and Geodatabase Disaster Risk for Spatial Planning

Science.gov (United States)

Hendriawan Nur, Wawan; Kumoro, Yugo; Susilowati, Yuliana

2018-02-01

The spatial planning in Indonesia needs to consider the information on the potential disaster. That is because disaster is a serious and detrimental problem that often occurs and causes casualties in some areas in Indonesia as well as inhibits the development. Various models and research were developed to calculate disaster risk assessment. GIS is a system for assembling, storing, analyzing, and displaying geographically referenced disaster. The information can be collaborated with geodatabases to model and to estimate disaster risk in an automated way. It also offers the possibility to customize most of the parameters used in the models. This paper describes a framework which can improve GIS and Geodatabase for the vulnerability, capacity or disaster risk assessment to support the spatial planning activities so they can be more adaptable. By using this framework, GIS application can be used in any location by adjusting variables or calculation methods without changing or rebuilding system from scratch.

Introducing GIS across Levels: Designing for Diversity

Science.gov (United States)

Barros, Joana

2017-01-01

The paper proposes a strategy for designing introductory GIS modules at Birkbeck, University of London. Seven design aspects or elements (content, practical exercises, assessment, pace, mode, level of support, and level of difficulty) for tailoring modules at appropriate levels and for diversity are introduced and their application in Birkbeck's…

Automated intelligent emergency assesment of GTA pipeline events

Energy Technology Data Exchange (ETDEWEB)

Asgary, Ali; Ghaffari, Alireza; Kong, Albert [University of York, Toronto, (Canada)

2010-07-01

The traditional approach used for risk assessment in pipeline operations is stochastic, using probabilities of events. This paper reports on an investigation into the deployment of an automated intelligence reasoning system used in decision support for risk assessments related to oil and gas emergencies in the Greater Toronto Area (GTA). The study evaluated the use of fuzzy interference rules encoded using JESS and fuzzy J to develop a risk assessment system. Real time data from web services such as weather, Geographic Information Systems (GIS) and Supervisory Control and Data Acquisition (SCADA) systems were used. This study took into consideration the most recent communications infrastructure and technologies, involving the most advanced human machine interface (HMI) access via hypertext transfer protocol (HTTP). This new approach will support decision making in emergency response scenarios. The study showed that the convergence of several technologies may change the automated intelligence system design paradigm.

GeoMEx: Geographic Information System (GIS) Prototype for Mars Express Data

Science.gov (United States)

Manaud, N.; Frigeri, A.; Ivanov, A. B.

2013-09-01

Server for the web publishing module. Interfaces with existing GIS front-end software (such as QGIS, GRASS, ArcView, or OpenLayers) will be investigated and tested in a second phase. This prototype is primarily intended to be used by the Mars Express instruments teams in support to their scientific investigations. It will also be used by the mission Archive Scientist in support to the data validation and PSA interface requirements definition tasks. Depending on its success, this prototype might be used in the future to demonstrate the benefit of a GIS component integration to ESA's planetary science operations planning systems.

Programming ArcGIS with Python cookbook

CERN Document Server

Pimpler, Eric

2015-01-01

Programming ArcGIS with Python Cookbook, Second Edition, is written for GIS professionals who wish to revolutionize their ArcGIS workflow with Python. Whether you are new to ArcGIS or a seasoned professional, you almost certainly spend time each day performing various geoprocessing tasks. This book will teach you how to use the Python programming language to automate these geoprocessing tasks and make you a more efficient and effective GIS professional.

Quantum GIS: il desktop GIS più potente, amichevole e libero

Directory of Open Access Journals (Sweden)

Otto Dassau

2009-03-01

Full Text Available QuantumGIS is a free and open source GISIt has an intuitive graphical interface, suitable also for first time GIS users, and thanks to the integration with other free software (e.g. GRASS, PostGIS, GDAL can read dozens of different formats, both raster and vector, link to OGC standard web services (WMS, WFS, SF and run complex analysis and modeling. Many plugins make it easy to extend its functionality. It is used throughout the world, by thousands of users, and its development is fast, with new functions continuously added.

Using GPS instruments and GIS techniques in data management for insect pest control programs

International Nuclear Information System (INIS)

2006-01-01

This interactive tutorial CD entitled 'Using GPS Instruments and GIS Techniques in Data Management for Insect Pest Control Programs' was developed by Micha silver of the Arava Development Co., Sapir, Israel, and includes step-by-step hands on lessons on the use of GPS/GIS in support of area-wide pest control operations

Cloud GIS Based Watershed Management

Science.gov (United States)

Bediroğlu, G.; Colak, H. E.

2017-11-01

In this study, we generated a Cloud GIS based watershed management system with using Cloud Computing architecture. Cloud GIS is used as SAAS (Software as a Service) and DAAS (Data as a Service). We applied GIS analysis on cloud in terms of testing SAAS and deployed GIS datasets on cloud in terms of DAAS. We used Hybrid cloud computing model in manner of using ready web based mapping services hosted on cloud (World Topology, Satellite Imageries). We uploaded to system after creating geodatabases including Hydrology (Rivers, Lakes), Soil Maps, Climate Maps, Rain Maps, Geology and Land Use. Watershed of study area has been determined on cloud using ready-hosted topology maps. After uploading all the datasets to systems, we have applied various GIS analysis and queries. Results shown that Cloud GIS technology brings velocity and efficiency for watershed management studies. Besides this, system can be easily implemented for similar land analysis and management studies.

New Nuclear Emergency Prognosis system in Korea

Science.gov (United States)

Lee, Hyun-Ha; Jeong, Seung-Young; Park, Sang-Hyun; Lee, Kwan-Hee

2016-04-01

incorporate the dose assessment methods of IAEA, WHO, and USNRC. The dose assessment result will express on the GIS (GIS (Geographic Information System) to provide to the local- governments and the central government. Acknowledgements This research has been supported by the Nuclear Safety and Security Commission [Reference No.1305020-0315-SB110

Analysis of open source GIS software

OpenAIRE

Božnis, Andrius

2006-01-01

GIS is one of the most perspective information technology sciences sphere. GIS conjuncts the digital image analysis and data base systems. This makes GIS wide applicable and very high skills demanding system. There is a lot of commercial GIS software which is well advertised and which functionality is pretty well known, while open source software is forgotten. In this diploma work is made analysis of available open source GIS software on the Internet, in the scope of different projects interr...

Anvendeligheden af GIS

DEFF Research Database (Denmark)

Winstrup, Mie; Levin, Gregor

2011-01-01

Fragmentering af naturen er en trussel mod biodiversiteten, og etablering af økologiske forbindelser/korridorer mellem naturområderne er én måde hvorved nedgangen i biodiversitet kan stoppes. Med Næstved Kommune som case-område har jeg undersøgt, hvordan analyser i GIS kan bruges til at udvælge...... omdannet til reelle korridorer, hvor bredden afhænger af arealdækket som forbindelserne krydser. I implementerings øjemed er det anvendeligt at vide om nogle forbindelser er særlig vigtige for at skabe mere sammenhængende natur. GIS er anvendeligt hertil, idet GIS kan bruges til at bestemme den enkelte...

INTEGRATING MULTIPLE CRITERIA EVALUATION AND GIS IN ECOTOURISM: A REVIEW

Directory of Open Access Journals (Sweden)

Z. H. Mohd

2016-09-01

Full Text Available The concept of 'Eco-tourism' is increasingly heard in recent decades. Ecotourism is one adventure that environmentally responsible intended to appreciate the nature experiences and cultures. Ecotourism should have low impact on environment and must contribute to the prosperity of local residents. This article reviews the use of Multiple Criteria Evaluation (MCE and Geographic Information System (GIS in ecotourism. Multiple criteria evaluation mostly used to land suitability analysis or fulfill specific objectives based on various attributes that exist in the selected area. To support the process of environmental decision making, the application of GIS is used to display and analysis the data through Analytic Hierarchy Process (AHP. Integration between MCE and GIS tool is important to determine the relative weight for the criteria used objectively. With the MCE method, it can resolve the conflict between recreation and conservation which is to minimize the environmental and human impact. Most studies evidences that the GIS-based AHP as a multi criteria evaluation is a strong and effective in tourism planning which can aid in the development of ecotourism industry effectively.

Integrating Multiple Criteria Evaluation and GIS in Ecotourism: a Review

Science.gov (United States)

Mohd, Z. H.; Ujang, U.

2016-09-01

The concept of 'Eco-tourism' is increasingly heard in recent decades. Ecotourism is one adventure that environmentally responsible intended to appreciate the nature experiences and cultures. Ecotourism should have low impact on environment and must contribute to the prosperity of local residents. This article reviews the use of Multiple Criteria Evaluation (MCE) and Geographic Information System (GIS) in ecotourism. Multiple criteria evaluation mostly used to land suitability analysis or fulfill specific objectives based on various attributes that exist in the selected area. To support the process of environmental decision making, the application of GIS is used to display and analysis the data through Analytic Hierarchy Process (AHP). Integration between MCE and GIS tool is important to determine the relative weight for the criteria used objectively. With the MCE method, it can resolve the conflict between recreation and conservation which is to minimize the environmental and human impact. Most studies evidences that the GIS-based AHP as a multi criteria evaluation is a strong and effective in tourism planning which can aid in the development of ecotourism industry effectively.

Trends in GIS: an environmental perspective

International Nuclear Information System (INIS)

Ringrose, S.

1992-01-01

Trends in the Geographic Information System (GIS) have long been difficult to assess comprehensively because of the different perspective of the large number of players in the GIS game. This work represents an overview intended as background to the Workshop Proceedings. As the term GIS means different things to different people the intent is to start with definitions followed by a discussion of data models and inherent functionality of GIS systems. Recent trends are also considered in the context of environmental analyses. Problems arise when considering environmental monitoring due to the paucity of explicit functions dealing with change detection through time. Here parallels are drawn with recent studies which have used the integration of GIS and remotely sensed data. Reasons behind the functional limitations of GIS because apparent as the historical evolution of present day GIS systems is considered, although to some extent these are mitigated by future trends. Finally consideration is given to the role of GIS in assisting with mine site development and especially mine site rehabilitation. 23 refs

Eco-Balancing as a Guideline for Environmentally Sound Regional Planning Supported by GIS Applications

Directory of Open Access Journals (Sweden)

ROMAN J. M. LENZ

2005-01-01

Full Text Available During the last several years, environmental impact assessment, regional or spatial planning, and environmental balancing seem to develop similarities, e.g. joint basic methodological approaches such as the use of environmental indicators, the focus on same environmental goods such air, water, soil, flora/fauna, etc. (Lenz 1999. Especially GIS-based software systems show their multiple applications in these fields.After a short introduction about the central role of indicators in transdisciplinary problem solving processes, experiences from a set of regional environmental (or eco balances show a wide range of advantages as well as disadvantages in the context of the widespread use of GIS-based planning tools. Relying on concepts and examples for the spatial eco-balances in the district of Pfaffenhofen (Upper Bavaria, Germany; cf. Lenz 1997 and the municipality of Mulfingen (Hohenlohe, Germany - both of them related to the concept of environmental indicators of the Advisory Board of Environmental Affairs of the Federal Republic of Germany (SRU 1994 and the Federal Environmental Agency (UBA 1995 - we can show GIS-based information systems of a high practical relevancy. On the basis of the GIS software ArcView, the data base management system Access, and html scripts, we developed environmental information systems to balance environmental effects in a map scale of 1:5,000 - 1:50,000, in order to provide the administration with tools for an environmentally sound and sustainable development of their area (Lenz 1997, 1999, Beuttler et al. 1999. The spatial distribution of land use types, solar energy potential, area consumption and drinking water consumption for the municipality of Mulfingen are highlighted in this paper. Still, the practical use of the systems seems to be limited due to the lack of computer skills among the administrators – even after programming graphical user interfaces for the indicator “drinking water consumption”-, as well

Research on the theory and methodology of integrating GIS and MAS and its application in simulating of pedestrians flows in a crowd's activity centre of Shanghai metropolitan

Science.gov (United States)

Liu, Miaolong; Chen, Peng

2006-10-01

Based on the development trend of research on urban morphology and its evolution from macro scale to micro scale, a new tight-coupling integrating method of GIS and MAS has been discussed briefly in this paper. After analyzing the characteristics and mechanism of pedestrian's flows in a crowds' activity center in a metropolitan, a prototype and mathematical expression of pedestrian's flows simulation have been put forward in the paper. A few key expressions and techniques for treating the specific behaviors of pedestrians flows, especially how the individuals of the flows make a decision to follow a original designed direction, how to make a decision whether stop or change his movement and select a new direction when the individuals meet a obstacle have been explored and discussed in detail. Using some tools provided by general GIS systems (such as ArcGIS 9) and a few specific programming languages, a new software system integrating GIS and MAS applicable for simulating pedestrians flows in a crowd activity centre has been developed successfully. Under the environment supported by the software system, as an applicable case, a dynamic evolution process of the pedestrian's flows (dispersed process for the spectators) in a crowds' activity center - The Shanghai Stadium has been simulated successfully. The successful simulating of a case of emergence when one or more exits emerge accidents will be very useful for managing and treating crowds' safety in a lot of assembling centers. At the end of the paper, some new research problems have been pointed out for the future.

Design and operation of the emergency support center, CAE

International Nuclear Information System (INIS)

Caro, R. J.; Lopez Trillo, E.

2016-01-01

The enhancements developed in Spain in the area of Emergency Management, as consequence of the accident at the Fukushima Dai-Ichi NPP in 2011, included the definition of new emergency response centers; Alternative Center for Emergency Management (CAGE) on each NPP and the Emergency Support Center (CAE), shared by all NPPs. This article summarizes the main features and operation activities undertaken since the establishment of the new CAE, centralized, external to the NPPs shared by all Spanish plants and managed by Tecnatom. (Author)

Teaching And Learning Tectonics With Web-GIS

Science.gov (United States)

Anastasio, D. J.; Sahagian, D. L.; Bodzin, A.; Teletzke, A. L.; Rutzmoser, S.; Cirucci, L.; Bressler, D.; Burrows, J. E.

2012-12-01

ideas, uses geospatial technology, and supports for teachers in adopting and implementing GIS and inquiry-based activities.

The architecture of a virtual grid GIS server

Science.gov (United States)

Wu, Pengfei; Fang, Yu; Chen, Bin; Wu, Xi; Tian, Xiaoting

2008-10-01

The grid computing technology provides the service oriented architecture for distributed applications. The virtual Grid GIS server is the distributed and interoperable enterprise application GIS architecture running in the grid environment, which integrates heterogeneous GIS platforms. All sorts of legacy GIS platforms join the grid as members of GIS virtual organization. Based on Microkernel we design the ESB and portal GIS service layer, which compose Microkernel GIS. Through web portals, portal GIS services and mediation of service bus, following the principle of SoC, we separate business logic from implementing logic. Microkernel GIS greatly reduces the coupling degree between applications and GIS platforms. The enterprise applications are independent of certain GIS platforms, and making the application developers to pay attention to the business logic. Via configuration and orchestration of a set of fine-grained services, the system creates GIS Business, which acts as a whole WebGIS request when activated. In this way, the system satisfies a business workflow directly and simply, with little or no new code.

CoC GIS Tools (GIS Tool)

Data.gov (United States)

Department of Housing and Urban Development — This tool provides a no-cost downloadable software tool that allows users to interact with professional quality GIS maps. Users access pre-compiled projects through...

Supporting Facility Management Processes through End-Users’ Integration and Coordinated BIM-GIS Technologies

Directory of Open Access Journals (Sweden)

Claudio Mirarchi

2018-05-01

Full Text Available The integration of facility management and building information modelling (BIM is an innovative and critical undertaking process to support facility maintenance and management. Even though recent research has proposed various methods and performed an increasing number of case studies, there are still issues of communication processes to be addressed. This paper presents a theoretical framework for digital systems integration of virtual models and smart technologies. Based on the comprehensive analysis of existing technologies for indoor localization, a new workflow is defined and designed, and it is utilized in a practical case study to test the model performance. In the new workflow, a facility management supporting platform is proposed and characterized, featuring indoor positioning systems to allow end users to send geo-referenced reports to central virtual models. In addition, system requirements, information technology (IT architecture and application procedures are presented. Results show that the integration of end users in the maintenance processes through smart and easy tools can overcome the existing limits of barcode systems and building management systems for failure localization. The proposed framework offers several advantages. First, it allows the identification of every element of an asset including wide physical building elements (walls, floors, etc. without requiring a prior mapping. Second, the entire cycle of maintenance activities is managed through a unique integrated system including the territorial dimension. Third, data are collected in a standard structure for future uses. Furthermore, the integration of the process in a centralized BIM-GIS (geographical information system information management system admit a scalable representation of the information supporting facility management processes in terms of assets and supply chain management and monitoring from a spatial perspective.

Emergency preparedness 1995 site support plan WBS 6.7.2.3

International Nuclear Information System (INIS)

Faulk, S.M.

1994-09-01

The Emergency Preparedness Program provides an emergency management system including occurrence notification; development, coordination, and direction of planning, preparedness, and readiness assurance for response to emergency events on the Hanford Site; and emergency management support to Department of Energy, Richland Operations Office (RL)

Measuring strategy of Support Centre RIVM for nuclear emergencies

International Nuclear Information System (INIS)

Pruppers, M.J.M.; Smetsers, R.C.G.M.

1994-11-01

The accident at the Chernobyl nuclear power station in April 1986 and its consequences were reason for the Dutch government to evaluate and improve the facilities and the preparedness for nuclear emergency management in the Netherlands. The results of the evaluation have been elaborated in operational terms in the National Plan for Nuclear Emergency Planning and Response (EPR). During an accident with radioactive material the Technical Information Group (TIG) coordinates the measuring activities of the so-called Support Centres. According to the EPR, measuring activities of Support Centre RIVM are focussed on the collection and processing of data on emissions, concentrations, depositions and radiation doses from soil and air. This report describes the measuring strategy of RIVM for nuclear emergencies. The measuring strategy and the measuring plan, the latter deduced from the measuring strategy, concentrate on explicit answers to the following central questions: what has to be measured, by whom, where, when and how, and why? The demands of the TIG and the specification of tasks and operational facilities of Support Centre RIVM are considered as starting-points, limiting conditions and constraints for the measuring strategy. These items are converted to explicit choices for the measuring strategy and the default measuring plan. This report further includes a list of contacts of Support Centre RIVM with other (research) institutes, inside and outside the Netherlands, which may be relevant during a nuclear emergency. 3 figs., 2 tabs., 22 refs

Integrating and Managing Bim in GIS, Software Review

Science.gov (United States)

El Meouche, R.; Rezoug, M.; Hijazi, I.

2013-08-01

Since the advent of Computer-Aided Design (CAD) and Geographical Information System (GIS) tools, project participants have been increasingly leveraging these tools throughout the different phases of a civil infrastructure project. In recent years the number of GIS software that provides tools to enable the integration of Building information in geo context has risen sharply. More and more GIS software are added tools for this purposes and other software projects are regularly extending these tools. However, each software has its different strength and weakness and its purpose of use. This paper provides a thorough review to investigate the software capabilities and clarify its purpose. For this study, Autodesk Revit 2012 i.e. BIM editor software was used to create BIMs. In the first step, three building models were created, the resulted models were converted to BIM format and then the software was used to integrate it. For the evaluation of the software, general characteristics was studied such as the user interface, what formats are supported (import/export), and the way building information are imported.

Application of IPv6 in GIS

Science.gov (United States)

Wang, Zhen-feng; Wang, Liang

2008-10-01

The inherent flaws in current network, especially the inadequate IP address space, make the born of NGN (Next Generation Network). The NGN aims to enable the information sharing and inter-operation of heterogeneous networks. As the core of NGN, IPv6 (Internet Protocol version 6), which is designed as the successor of IPv4 running now, brings us many new features. It provides larger address space, supports mobile devices, and has built-in security policy, and so on. Although it brings us so many advantages and the backbone of NGN also has been constructed in many countries, we have difficulties moving to NGN. One of the main reasons is there are few killer applications for it. So what features can be employed by GIS, and how to use them is the main content of this paper. The IPv6 certainly offers new entry to solve some problems in GIS.

The Coastal Area Development Using GIS (Review of GIS Application Models

Directory of Open Access Journals (Sweden)

Prastowo Sutanto

2004-01-01

Full Text Available GIS, Geographical Information System, is a means that an be used to plan and to develop the coastal area because in carrying out the analysis this system combines the space data and their  attributes. The activities done among others the prototype development of algae cultivation and tourism ativities, the development of fish pond location, the reclamation of the Jakarta Bay, and the concept of development the floating “Keramba” for pearl oysters and white sea fish similar to sole. GIS analysis with heaviness and overlay mapping yields the appropriate map to plan and to develop the coastal area. The result of GIS analysis can be used to plan and to develop the coastal area.

Black Sea GIS developed in MHI

Science.gov (United States)

Zhuk, E.; Khaliulin, A.; Zodiatis, G.; Nikolaidis, A.; Isaeva, E.

2016-08-01

The work aims at creating the Black Sea geoinformation system (GIS) and complementing it with a model bank. The software for data access and visualization was developed using client server architecture. A map service based on MapServer and MySQL data management system were chosen for the Black Sea GIS. Php-modules and python-scripts are used to provide data access, processing, and exchange between the client application and the server. According to the basic data types, the module structure of GIS was developed. Each type of data is matched to a module which allows selection and visualization of the data. At present, a GIS complement with a model bank (the models build in to the GIS) and users' models (programs launched on users' PCs but receiving and displaying data via GIS) is developed.

The portable GIS applied to geotechnical inspections; O GIS portatil para inspecoes geotecnicas

Energy Technology Data Exchange (ETDEWEB)

Rabaco, Lis M.; Lins, Alexandre F. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil); Costa, Rogerio M.; Freitas, Carlos F. [CONCREMAT, Rio de Janeiro, RJ (Brazil)

2005-07-01

The purpose of this paper is to implement an interface using tool to pack the GIS application to carry out a field inspection. The solution was implemented on pocket equipment using a simplified map and database integrated with the GIS Corporative. The main objective is to avoid paper work in field inspections. The emphases are on geotechnical inspections in order to assist the recuperation of information about points with geotechnical risk. There are interfaces with external device as GPS for insertion of points of risk. A set of tools are developed for bidirectional synchronization among the Corporative GIS and the pocket devices. The project focused geotechnical inspections on field, in order to synchronize automatically the information collected with the pocket GIS application with a Web server, packing all information from field operation to managers. (author)

Decision Support System for the Response to Infectious Disease Emergencies Based on WebGIS and Mobile Services in China

NARCIS (Netherlands)

Y.P. Li (Ya-pin); L.Q. Fang (Lily); S.Q. Gao (Su-qing); Z. Wang (Zheng); P. Liu (Peng); X.G. Zhu (Xu-guang); B. Xu (Bing); H. Yang (Honghui); S.J. de Vlas (Sake); T.X. Shi (Tao-xing); W.-C. Cao (Wu-Chun)

2013-01-01

textabstractBackground: For years, emerging infectious diseases have appeared worldwide and threatened the health of people. The emergence and spread of an infectious-disease outbreak are usually unforeseen, and have the features of suddenness and uncertainty. Timely understanding of basic

Development of a web based GIS for health facilities mapping ...

African Journals Online (AJOL)

Hilary Mushonga

Key Words: Spatial Decision Support System, Web GIS, Mapping, Health geography. 1. Introduction ... Health geography is an area of medical research that incorporates geographic techniques into the study of ... street water pump. Once the ...

Digitizing topography map of pulau panjang Banten, using ArcGIS 9.2 and surfer 8

International Nuclear Information System (INIS)

Ari Nugroho and Yarianto SBS

2010-01-01

In supporting the site safety and feasibility assessment of the Nuclear Power Plant (NPP), has been created the topographical map based on Geographic Information System (GIS). This map was created from the primary spatial data compilation resulting from the topographical survey of Pulo Panjang Island in February 2009. A personal computer installed with ArcGIS version 9.2 from Environmental System Research Institute (ESRI) and Surfer version 8 was used to support the activity. ArcGIS 9.2 was used to compile and process an extra-terrestrial spatial data from Global Positioning System (GPS) Real Time Kinematic (RTK) while surfer 8 was used to create a contour from orthometric elevation data. The result of this activity is a topographical map of Pulo Panjang in digital data which integrated, duplicable, informative, and editable. (author)

STUDY NOISE POLLUTION TYUMEN USING GIS

Directory of Open Access Journals (Sweden)

V. A. Dobryakova

2016-01-01

Full Text Available One of the most harmful factors of environment of the city is the noise, and its weight among the factors adversely affecting the life and health of the population has been increasing steadily [Sheina and etc., 2007; Polovinkina and etc., 2012]. Today, most major cities of the Russian Federation (70% have a high noise pollution problem. The system of support for the monitoring and control of acoustic situation in the city can be considered noise pollution electronic cards made using geographic information systems (GIS. There are two fundamentally different approaches to the selection of software for creation of noise maps. According to the first of them, use universal multifunctional complexes GIS (ArcGIS, MapInfo. According to the distribution of data points on the noise characteristics is created TIN model. A second approach to create noise maps using highly specialized software (MapNoise, SoundPLAN, Mitha, Cadna, ExNOISE et al.. To calculate noise propagation area is divided on the grid with a certain step, the most relevant mapping purposes. Calculation of noise levels is carried out in a grid cell by measurements based on diffraction and reflection of sound barriers and absorbing underlying surface. Noise pollution is also displayed using contour lines.

A DISTRIBUTED HYPERMAP MODEL FOR INTERNET GIS

Institute of Scientific and Technical Information of China (English)

无

2000-01-01

The rapid development of Internet technology makes it possible to integrate GIS with the Internet,forming Internet GIS.Internet GIS is based on a distributed client/server architecture and TCP/IP & IIOP.When constructing and designing Internet GIS,we face the problem of how to express information units of Internet GIS.In order to solve this problem,this paper presents a distributed hypermap model for Internet GIS.This model provides a solution to organize and manage Internet GIS information units.It also illustrates relations between two information units and in an internal information unit both on clients and servers.On the basis of this model,the paper contributes to the expressions of hypermap relations and hypermap operations.The usage of this model is shown in the implementation of a prototype system.

LIFE CYCLE DATA ANALYSIS FOR SMART CITIES AND SUPPORT WITH GEOGRAPHIC INFORMATION SYSTEM (GIS

Directory of Open Access Journals (Sweden)

A. C. Kocalar

2017-11-01

Full Text Available The dynamics of globalization have gained momentum with today's developing technology. So we are now faced with the problems of urbanization (and urban governance, which become more evident than in the old days. As the subject cities, interdisciplinary qualities must always be considered. In the study, too, the focus of the urban area was on the problematic issue of intelligent or smart (especially, transportation management that remained within this framework. GIS plays a major role in establishing the relationship between all kinds of analyses and visual information in the same environment and in determining the right strategies. For this reason, the use of GIS for decision makers is one of the most commonly used methods for intellectual production in the smart cities concept. The work to be done with this method will be able to be systematically successful and sustainable applications in this way.

Life Cycle Data Analysis for Smart Cities and Support with Geographic Information System (gis)

Science.gov (United States)

Kocalar, A. C.

2017-11-01

The dynamics of globalization have gained momentum with today's developing technology. So we are now faced with the problems of urbanization (and urban governance), which become more evident than in the old days. As the subject cities, interdisciplinary qualities must always be considered. In the study, too, the focus of the urban area was on the problematic issue of intelligent or smart (especially, transportation) management that remained within this framework. GIS plays a major role in establishing the relationship between all kinds of analyses and visual information in the same environment and in determining the right strategies. For this reason, the use of GIS for decision makers is one of the most commonly used methods for intellectual production in the smart cities concept. The work to be done with this method will be able to be systematically successful and sustainable applications in this way.

Development of a prototype GIS for risk-hazard assessment

International Nuclear Information System (INIS)

Devonport, C.

1992-01-01

A collaborative research agreement between the Supervising Scientist for the Alligator Rivers Region (OSS) and the Northern Territory University (NTU) aims to develop and assess a computer-based Geographic Information System (GIS) to integrate terrain and geological data for risk-hazard analysis and modelling. This paper outlines initial design and development of the prototype GIS including the input of trial data of various types. It is recognised that the GIS must be flexible enough to accommodate change and provide a base for a variety of research needs. Such functionality is likely to be provided best by an initially small, generic prototype GIS to which functions and data are added as required. Properties of the prototype identified as critical to its usefulness include integration of different types of data into the system, understanding and accommodating inconsistencies between data sets and the recognition and recording of error. Various types of data (elevation data, maps and images) available at the outset of the project are outlined together with a brief discussion on their source, integration into the database, derivative products and the potential usefulness of, and problems associated with, the different data formats. The analytical possibilities offered by the trial data will be explored next and the results of the first development cycle presented by the end of 1992. Subsequently, additional data will be incorporated into the database, analytical techniques will be used to build models, and user-driven development will enable the GIS to begin to support a decision research process. 20 refs

A mobile computer system to support first responders to a radiological emergency

Energy Technology Data Exchange (ETDEWEB)

Silva, Antonio J.D. da, E-mail: antoniojoseds@gmail.com [Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Pos-Graduacao em Informatica; Santos, Joao R. dos; Pereira, Claudio M.N.A.; Carvalho, Paulo V.R., E-mail: paulov@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

2013-07-01

Decision-making in emergency situations is characterized by its speed, pressure, and especially the uncertainty of information. Uninformed decisions or decisions based on unreliable data may lead to inappropriate actions. Although several studies that aim to combine different databases and provide full information to emergency response operation commanders can be found, only few of them are dedicated to radiological emergencies situations and even less are those that aim to provide support for the emergency first responder. We developed a system to support first responders to deal with radiological emergencies using cognitive task analysis techniques to elicit the tacitly knowledge of practitioners to grasp what information is really needed during radiological emergency response. (author)

A mobile computer system to support first responders to a radiological emergency

International Nuclear Information System (INIS)

Silva, Antonio J.D. da

2013-01-01

Decision-making in emergency situations is characterized by its speed, pressure, and especially the uncertainty of information. Uninformed decisions or decisions based on unreliable data may lead to inappropriate actions. Although several studies that aim to combine different databases and provide full information to emergency response operation commanders can be found, only few of them are dedicated to radiological emergencies situations and even less are those that aim to provide support for the emergency first responder. We developed a system to support first responders to deal with radiological emergencies using cognitive task analysis techniques to elicit the tacitly knowledge of practitioners to grasp what information is really needed during radiological emergency response. (author)

Estimating and mapping the incidence of dengue and chikungunya in Honduras during 2015 using Geographic Information Systems (GIS).

Science.gov (United States)

Zambrano, Lysien I; Sierra, Manuel; Lara, Bredy; Rodríguez-Núñez, Iván; Medina, Marco T; Lozada-Riascos, Carlos O; Rodríguez-Morales, Alfonso J

Geographical information systems (GIS) use for development of epidemiological maps in dengue has been extensively used, however not in other emerging arboviral diseases, nor in Central America. Surveillance cases data (2015) were used to estimate annual incidence rates of dengue and chikungunya (cases/100,000 pop) to develop the first maps in the departments and municipalities of Honduras. The GIS software used was Kosmo Desktop 3.0RC1 ® . Four thematic maps were developed according departments, municipalities, diseases incidence rates. A total of 19,289 cases of dengue and 85,386 of chikungunya were reported (median, 726 cases/week for dengue and 1460 for chikungunya). Highest peaks were observed at weeks 25th and 27th, respectively. There was association between progression by weeks (p37%, both). Use of GIS-based epidemiological maps allow to guide decisions-taking for prevention and control of diseases that still represents significant issues in the region and the country, but also in emerging conditions. Copyright © 2016 King Saud Bin Abdulaziz University for Health Sciences. Published by Elsevier Ltd. All rights reserved.

Lagrangian modeling of atmospheric dispersion of radionuclides and geographical information systems as tools to support emergency planning in area of influence of nuclear complex of Angra dos Reis, RJ, Brazil; Modelagem Lagrangeana da dispersao atmoferica de radionuclideos e sistemas de informacao geografica como ferramentas de suporte ao planejamento de emergencia na area de influencia do complexo nuclear de Angra dos Reis, RJ

Energy Technology Data Exchange (ETDEWEB)

Silva, Corbiniano

2013-07-01

Industrial accidents generally endanger structures and the set of environmental influence area where the enterprises are located, especially when affected by atmospheric dispersion of their pollutants, whose concern with the evacuation of the population is the main goal in emergency situations. Considering the nuclear complex Angra dos Reis - RJ, based on computer modeling analysis of the mechanisms of pollutant dispersion in conjunction with geographic information systems were developed. Thus, information about the dispersion of radionuclides - from simulations performed on the HYSPLIT; meteorological data (direction, intensity and calm on the wind regime and analysis of the wind field in the region using WRF), occurrence of landslides and data on the environmental study area were integrated into a GIS database using ArcGIS platform. Aiming at the identification and definition of escape routes in case of evacuation from accidental events in CNAAA, the results point solutions for long-term planning, based on weather and landslides, and short-term, supported by simulations of the dispersion radionuclides, in order to support actions that assist local emergency planning. (author)

Emergency Neurological Life Support: Intracerebral Hemorrhage.

Science.gov (United States)

Jauch, Edward C; Pineda, Jose A; Hemphill, J Claude

2015-12-01

Intracerebral hemorrhage (ICH) is a subset of stroke due to bleeding within the parenchyma of the brain. It is potentially lethal, and survival depends on ensuring an adequate airway, reversal of coagulopathy, and proper diagnosis. ICH was chosen as an Emergency Neurological Life Support protocol because intervention within the first critical hour may improve outcome, and it is critical to have site-specific protocols to drive care quickly and efficiently.

The application of geographic information system to radiological and nuclear emergency monitoring

International Nuclear Information System (INIS)

Sadaniowski, I.V.; Rodriguez, M.; Rojas, C.A.; Jordan, O.D.

2010-01-01

The Geographic Information System (GIS) implementation for the preparation and response in case of to radiological and nuclear emergencies is being developed in the Emergency Control Center of the Argentina Nuclear Regulatory Authority, since many years ago. Additionals features have been incorporated such as integration with the results of radiological monitoring, improving and expanding its benefits both in the preparation stage and during the work of emergency response. This paper shows the specific application of GIS to radiological monitoring in case of emergency situations such as during the search of orphan sources and the characterization of geographic context around nuclear power plants and atomic centers. The GIS provides essential data cartographic for the monitoring with sophisticated detectors, to integrate with the information received with infrastructure, urban and rural population maps, physical features of the place, satellite images, etc. The monitoring results are analyzed and compared with relevant information for decision making during the response, like evacuation routes, affected population, security forces in the area, radiological characterization, application of protective actions, hospitals, schools, etc. These two integrated tools improve preparedness and response system in case of radiological or nuclear emergency. (authors) [es

A GIS Application to Explore Postal Retail Outlet Locations

Directory of Open Access Journals (Sweden)

Nikola Trubint

2012-03-01

Full Text Available The use of GIS in solving a wide variety of problems in postal operations is expanding. This approach provides the development and usage of new methods in spatial data analysis, as support in achieving a better quality of the decision-making process. The use of location analysis model based on GIS software is implemented in solving the Belgrade postal retail outlet problem. One of the most important experiences of model implementation is that the local environmental conditions have a significant impact on strategic as well as operational approach. A portion of the material included in the paper has resulted from the Serbian PTT and CPC (Canada Post Corporation joint project Location Analysis.

Real-time GIS data model and sensor web service platform for environmental data management.

Science.gov (United States)

Gong, Jianya; Geng, Jing; Chen, Zeqiang

2015-01-09

Effective environmental data management is meaningful for human health. In the past, environmental data management involved developing a specific environmental data management system, but this method often lacks real-time data retrieving and sharing/interoperating capability. With the development of information technology, a Geospatial Service Web method is proposed that can be employed for environmental data management. The purpose of this study is to determine a method to realize environmental data management under the Geospatial Service Web framework. A real-time GIS (Geographic Information System) data model and a Sensor Web service platform to realize environmental data management under the Geospatial Service Web framework are proposed in this study. The real-time GIS data model manages real-time data. The Sensor Web service platform is applied to support the realization of the real-time GIS data model based on the Sensor Web technologies. To support the realization of the proposed real-time GIS data model, a Sensor Web service platform is implemented. Real-time environmental data, such as meteorological data, air quality data, soil moisture data, soil temperature data, and landslide data, are managed in the Sensor Web service platform. In addition, two use cases of real-time air quality monitoring and real-time soil moisture monitoring based on the real-time GIS data model in the Sensor Web service platform are realized and demonstrated. The total time efficiency of the two experiments is 3.7 s and 9.2 s. The experimental results show that the method integrating real-time GIS data model and Sensor Web Service Platform is an effective way to manage environmental data under the Geospatial Service Web framework.

Implementation av spridningsmodell i ArcGIS

OpenAIRE

Jou, Javid

2012-01-01

The project involves implementing a finished dispersion model into ArcGIS. The goal of the tool is to show how dangerous and toxic substances will travel in the ground after long periods. The goal of the project is to understand GIS in general, what it is used for and gain an insight into how developing tools for ArcGIS is, what challenges might exists. Understanding the type of data that can be stored and accessed in ArcGIS a long with the tools and functionality offered by the system when u...

Geographic Information System Technology Leveraged for Crisis Planning, Emergency, Response, and Disaster Management

Science.gov (United States)

Ross, A.; Little, M. M.

2013-12-01

NASA's Atmospheric Science Data Center (ASDC) is piloting the use of Geographic Information System (GIS) technology that can be leveraged for crisis planning, emergency response, and disaster management/awareness. Many different organizations currently use GIS tools and geospatial data during a disaster event. ASDC datasets have not been fully utilized by this community in the past due to incompatible data formats that ASDC holdings are archived in. Through the successful implementation of this pilot effort and continued collaboration with the larger Homeland Defense and Department of Defense emergency management community through the Homeland Infrastructure Foundation-Level Data Working Group (HIFLD WG), our data will be easily accessible to those using GIS and increase the ability to plan, respond, manage, and provide awareness during disasters. The HIFLD WG Partnership has expanded to include more than 5,900 mission partners representing the 14 executive departments, 98 agencies, 50 states (and 3 territories), and more than 700 private sector organizations to directly enhance the federal, state, and local government's ability to support domestic infrastructure data gathering, sharing and protection, visualization, and spatial knowledge management.The HIFLD WG Executive Membership is lead by representatives from the Department of Defense (DoD) Office of the Assistant Secretary of Defense for Homeland Defense and Americas' Security Affairs - OASD (HD&ASA); the Department of Homeland Security (DHS), National Protection and Programs Directorate's Office of Infrastructure Protection (NPPD IP); the National Geospatial-Intelligence Agency (NGA) Integrated Working Group - Readiness, Response and Recovery (IWG-R3); the Department of Interior (DOI) United States Geological Survey (USGS) National Geospatial Program (NGP), and DHS Federal Emergency Management Agency (FEMA).

Application of GIS to assess rainfall variability impacts on crop yield ...

African Journals Online (AJOL)

SERVER

2007-09-19

Sep 19, 2007 ... Geospatial analysis. GIS Interpolation and other geospatial Analysis techniques were carried out to ... means of Spatial Decision Support System (SDSS) to plan crops ... rainwater variability on water availability for crop maize ...

Integrating ArcGIS Online with GEOSS Data Access Broker

Science.gov (United States)

Lucchi, Roberto; Hogeweg, Marten

2014-05-01

). The synergistic efforts will include: 1) Providing the GEOSS community with access to Esri GIS community content, expertise and technology through the GEOSS DAB, as well as to collaboration tools via the ArcGIS platform. 2) Encouraging the Esri GIS community to participate as contributors and users of GEOSS. 3) Supporting the extension of GEOSS to include ArcGIS Online publicly-available data. 4) Collaboration on outreach to both the GIS and GEO communities on effective use of GEOSS, particularly for environmental decision-making. 5) Collaboration on the evolution of GEOSS as an open and interoperable platform in conjunction with the GEOSS community. Protocols such as OPenDAP and formats such as netCDF will play a critical role. This talk will present the initial results of the collaboration which includes the integration of ArcGIS Online in the GEOSS DAB.

Developing and Applying a Participative web-Based GIS for Integration of Public Perceptions in Strategic Environmental Assessment

OpenAIRE

Gonzalez, Ainhoa; Gilmer, Alan; Foley, Ronan; Sweeney, John; Fry, John

2009-01-01

The intrinsic spatial nature of development plans poses specific requirements on the analytical tools applied to support Strategic Environmental Assessment (SEA) processes. Geographic information systems (GIS), with their mapping and analytical potential, can assist and enhance the various stages of SEA. A method has been developed to apply GIS as a support tool to assist SEA of land use plans in the Republic of Ireland. This chapter describes one phase in the development and testing of th...

Comparative Multi-Criteria Assessment of Climate Policies and Sustainable Development Strategies in Cameroon: Towards a GIS Decision-Support Tool for the Design of an Optimal REDD+ Strategy

Directory of Open Access Journals (Sweden)

Anderson Gwanyebit Kehbila

2014-09-01

Full Text Available Cameroon is committed to reducing emissions from deforestation and forest degradation plus conservation, sustainable management of forests and enhancement of carbon stocks (REDD+. To achieve this goal, the government has introduced a series of policy reforms and formulated a number of key strategic planning documents to advance the REDD+ readiness process in Cameroon. This paper assesses the extent to which major cross-sectoral policies support or impede the development and implementation of an optimal REDD+ strategy in Cameroon from a comparative multi-criteria perspective. Study results reveal that a majority of the policy instruments reviewed appeared to be less prescriptive in terms of any tangible REDD+ strategy, as they do not have provisions for tangible measures to reduce deforestation and forest degradation. Given the lack of adequate flexibility, prompt review and responsiveness of these cross-sectoral policies to adapt themselves to new realities and respond to a changing environment, this paper introduces a GIS-REDD+ decision support system (GIS-REDD+DSS that is necessary to support the adaptive element of an adaptive REDD+ strategy in Cameroon. The GIS-REDD+DSS, an electronic REDD+agri intermediary hub, serves the following purpose: (1 host a database of locally-relevant climate information, improved input technologies, best practices as well as land use and forest cover geo-spatial maps; (2 host a virtual economic tool that performs economic valuations (costs and benefits and financial analysis of REDD+agri projects to aid investment decision-making; and (3 host an electronic marketplace to mediate any-to-any transactions among REDD+agri project developers, service providers, input suppliers, private and institutional investors and buyers (wholesalers and retailers, thereby creating value in two ways: aggregation and matching. This decision support tool, we argue, is a fundamental prerequisite for “policy and REDD+ safeguard

Tilgængelighed & GIS

DEFF Research Database (Denmark)

Clemens, Esben Norby; Rolff-Petersen, Hans

2002-01-01

Artiklen beskriver en metode til implementering af en gravitationsbaseret tilgængelighedsmodel ved anvendelse af bl.a. netværksberegninger i et standard GIS-software. Udgivelsesdato: August......Artiklen beskriver en metode til implementering af en gravitationsbaseret tilgængelighedsmodel ved anvendelse af bl.a. netværksberegninger i et standard GIS-software. Udgivelsesdato: August...

Emergency Support Function 15: Communication Synchronization during Defense Support of Civil Authorities Operations

Science.gov (United States)

2015-06-12

for the future. I would like to thank my parents Juan and Helen for their love, support, and guidance; your hard work and sacrifices have given me...required support to civil authortities during emergency relief operations.9 Once civil authorites are capable of resuming responsibility for the...Freeman posit the researcher has an understanding of the cognitive styles of the program stakeholders which will increase access and comprehension of

GenGIS 2: geospatial analysis of traditional and genetic biodiversity, with new gradient algorithms and an extensible plugin framework.

Directory of Open Access Journals (Sweden)

Donovan H Parks

Full Text Available GenGIS is free and open source software designed to integrate biodiversity data with a digital map and information about geography and habitat. While originally developed with microbial community analyses and phylogeography in mind, GenGIS has been applied to a wide range of datasets. A key feature of GenGIS is the ability to test geographic axes that can correspond to routes of migration or gradients that influence community similarity. Here we introduce GenGIS version 2, which extends the linear gradient tests introduced in the first version to allow comprehensive testing of all possible linear geographic axes. GenGIS v2 also includes a new plugin framework that supports the development and use of graphically driven analysis packages: initial plugins include implementations of linear regression and the Mantel test, calculations of alpha-diversity (e.g., Shannon Index for all samples, and geographic visualizations of dissimilarity matrices. We have also implemented a recently published method for biomonitoring reference condition analysis (RCA, which compares observed species richness and diversity to predicted values to determine whether a given site has been impacted. The newest version of GenGIS supports vector data in addition to raster files. We demonstrate the new features of GenGIS by performing a full gradient analysis of an Australian kangaroo apple data set, by using plugins and embedded statistical commands to analyze human microbiome sample data, and by applying RCA to a set of samples from Atlantic Canada. GenGIS release versions, tutorials and documentation are freely available at http://kiwi.cs.dal.ca/GenGIS, and source code is available at https://github.com/beiko-lab/gengis.

APPLICATION OF GIS TO ENVIRONMENTAL PROBLEMS IN THE HORNÁD VALLEY

Directory of Open Access Journals (Sweden)

Jablonská Jana

1997-10-01

Full Text Available The paper discusses some of the possibilities of managing environmental issues linked with industrial and communal activities, using the support of GIS. At the Dept. of Geology and Mineralogy (Numerical geolo-gy section the first steps has been made to enable a participative monitoring of the state of the environment in the Hornád river valley through a number of projects. (RECENT, Hornád river watching. A number of speciali-zed application software was developed (for the MicroStation environment that enables the GIS type of data integration. The paper gives the most important results of the monitoring.

Risk-based emergency decision support

International Nuclear Information System (INIS)

Koerte, Jens

2003-01-01

In the present paper we discuss how to assist critical decisions taken under complex, contingent circumstances, with a high degree of uncertainty and short time frames. In such sharp-end decision regimes, standard rule-based decision support systems do not capture the complexity of the situation. At the same time, traditional risk analysis is of little use due to variability in the specific circumstances. How then, can an organisation provide assistance to, e.g. pilots in dealing with such emergencies? A method called 'contingent risk and decision analysis' is presented, to provide decision support for decisions under variable circumstances and short available time scales. The method consists of nine steps of definition, modelling, analysis and criteria definition to be performed 'off-line' by analysts, and procedure generation to transform the analysis result into an operational decision aid. Examples of pilots' decisions in response to sudden vibration in offshore helicopter transport method are used to illustrate the approach

GEOGRAPHIC INFORMATION SYSTEM AND REMOTE SENSING BASED DISASTER MANAGEMENT AND DECISION SUPPORT PLATFORM: AYDES

OpenAIRE

Keskin, İ.; Akbaba, N.; Tosun, M.; Tüfekçi, M. K.; Bulut, D.; Avcı, F.; Gökçe, O.

2018-01-01

The accelerated developments in information technology in recent years, increased the amount of usage of Geographic Information Systems (GIS) and Remote Sensing (RS) in disaster management considerably and the access from mobile and web-based platforms to continuous, accurate and sufficient data needed for decision-making became easier accordingly. The Disaster Management and Decision Support System (AYDES) has been developed with the purpose of managing the disaster and emergency manageme...

GIS og geodata

DEFF Research Database (Denmark)

Balstrøm, Thomas

2008-01-01

Interview med Thomas Balstrøm om anvendelser af geografiske informationssystemer (GIS) i relation til forskning i jordbundsgeografiske problemstillinger. Bl.a. om forskning i rumlige analyser og inddragelse af rumlig statistik til at finde sammenhænge i geografiske data.......Interview med Thomas Balstrøm om anvendelser af geografiske informationssystemer (GIS) i relation til forskning i jordbundsgeografiske problemstillinger. Bl.a. om forskning i rumlige analyser og inddragelse af rumlig statistik til at finde sammenhænge i geografiske data....

WEB GIS SUPPORT OF ENVIRONMENTAL-GEOGRAPHICAL ASSESSMENT OF LAND RESOURCES IN THE NEW MOSCOW TERRITORY

Directory of Open Access Journals (Sweden)

I. K. Lurie

2016-01-01

Full Text Available In 2011, the area of Moscow, one of the largest urbanized megacomplexes, increased by more than 1440 km2 due to the accession of the Troitsky and Novomoskovsky аutonomous districts. That called for conducting detailed comprehensive environmental-geographical research, integrated assessment of the lands state of the annexed territories and the corresponding cartographic support to maintain further socio-economic development of the area. In the same 2011, at Lomonosov Moscow State University, MSU Geoportal started working as a new instrument of collective access and processing of spatial data to provide innovative research and educational activities with relevant materials of remote sensing data of the Earth and analytical tools for conducting geographic data analysis in the Geoportal environment. Cartographic support of the «New Moscow» project has been realized by means of collection, processing and systematization of geo-spatial data, formation of a geo-data bank and a series of thematic maps, created on its basis. It has been decided to develop Web GIS software by creating a geo-resource on the existed MSU Geoportal, which main purpose is forming the information and cartographic support for the New Moscow territories, based on the profound study of different components of the environment and affecting factors. The realization of this project has required the creation of a few dozens of maps for the comprehensive ecological and geographical assessment of the lands of the new annexed territories because of their status, economic and socio-geographical state changes.

Determining spatio-temporal distribution of bee forage species of Al-Baha region based on ground inventorying supported with GIS applications and Remote Sensed Satellite Image analysis.

Science.gov (United States)

Adgaba, Nuru; Alghamdi, Ahmed; Sammoud, Rachid; Shenkute, Awraris; Tadesse, Yilma; Ansari, Mahammad J; Sharma, Deepak; Hepburn, Colleen

2017-07-01

In arid zones, the shortage of bee forage is critical and usually compels beekeepers to move their colonies in search of better forages. Identifying and mapping the spatiotemporal distribution of the bee forages over given area is important for better management of bee colonies. In this study honey bee plants in the target areas were inventoried following, ground inventory work supported with GIS applications. The study was conducted on 85 large plots of 50 × 50 m each. At each plot, data on species name, height, base diameter, crown height, crown diameter has been taken for each plant with their respective geographical positions. The data were stored, and processed using Trimble GPS supported with ArcGIS10 software program. The data were used to estimate the relative frequency, density, abundance and species diversity, species important value index and apicultural value of the species. In addition, Remotely Sensed Satellite Image of the area was obtained and processed using Hopfield Artificial Neural Network techniques. During the study, 182 species from 49 plant families were identified as bee forages of the target area. From the total number of species; shrubs, herbs and trees were accounting for 61%, 27.67%, and 11.53% respectively. Of which Ziziphus spina-christi , Acacia tortilis , Acacia origina , Acacia asak , Lavandula dentata , and Hypoestes forskaolii were the major nectar source plants of the area in their degree of importance. The average vegetation cover values of the study areas were low (GIS and satellite image processing techniques could be an important tool for characterizing and mapping the available bee forage resources leading to their efficient and sustainable utilization.

Participatory GIS for resource management in Africa: Taking stock ...

International Development Research Centre (IDRC) Digital Library (Canada)

Participatory GIS for resource management in Africa: Taking stock. 25 avril 2016 ... Spatial decision-support tools hold considerable potential to contribute to sustainable resource management. By improving access to information ... Nombre d'entre nous qui résidons dans l'est du Canada avons l'impression qu'il n'y a pas eu.

Awareness of GIS services among librarians in Nigerian Federal ...

African Journals Online (AJOL)

Result showed that librarian are aware of the traditional map library and have prior knowledge of GIS services in the library. They indicated that lack of administrative support is one of the reasons for lack of Geographic Information Systems services in the Nigeria federal universities of technology libraries. Stab ility in ...

Real-time information support for managing plant emergency responses

International Nuclear Information System (INIS)

Cain, D.G.; Lord, R.J.; Wilkinson, C.D.

1983-01-01

The Three Mile Island Unit 2 accident highlighted the need to develop a systematic approach to managing plant emergency responses, to identify a better decision-making process, and to implement real-time information support for decision-making. The overall process management function is described and general information requirements for management of plant emergencies are identified. Basic information systems are being incorporated and future extensions and problem areas are discussed. (U.K.)

OpenClimateGIS - A Web Service Providing Climate Model Data in Commonly Used Geospatial Formats

Science.gov (United States)

Erickson, T. A.; Koziol, B. W.; Rood, R. B.

2011-12-01

The goal of the OpenClimateGIS project is to make climate model datasets readily available in commonly used, modern geospatial formats used by GIS software, browser-based mapping tools, and virtual globes.The climate modeling community typically stores climate data in multidimensional gridded formats capable of efficiently storing large volumes of data (such as netCDF, grib) while the geospatial community typically uses flexible vector and raster formats that are capable of storing small volumes of data (relative to the multidimensional gridded formats). OpenClimateGIS seeks to address this difference in data formats by clipping climate data to user-specified vector geometries (i.e. areas of interest) and translating the gridded data on-the-fly into multiple vector formats. The OpenClimateGIS system does not store climate data archives locally, but rather works in conjunction with external climate archives that expose climate data via the OPeNDAP protocol. OpenClimateGIS provides a RESTful API web service for accessing climate data resources via HTTP, allowing a wide range of applications to access the climate data.The OpenClimateGIS system has been developed using open source development practices and the source code is publicly available. The project integrates libraries from several other open source projects (including Django, PostGIS, numpy, Shapely, and netcdf4-python).OpenClimateGIS development is supported by a grant from NOAA's Climate Program Office.

Using GIS Mapping to Target Public Health Interventions: Examining Birth Outcomes Across GIS Techniques.

Science.gov (United States)

MacQuillan, E L; Curtis, A B; Baker, K M; Paul, R; Back, Y O

2017-08-01

With advances in spatial analysis techniques, there has been a trend in recent public health research to assess the contribution of area-level factors to health disparity for a number of outcomes, including births. Although it is widely accepted that health disparity is best addressed by targeted, evidence-based and data-driven community efforts, and despite national and local focus in the U.S. to reduce infant mortality and improve maternal-child health, there is little work exploring how choice of scale and specific GIS visualization technique may alter the perception of analyses focused on health disparity in birth outcomes. Retrospective cohort study. Spatial analysis of individual-level vital records data for low birthweight and preterm births born to black women from 2007 to 2012 in one mid-sized Midwest city using different geographic information systems (GIS) visualization techniques [geocoded address records were aggregated at two levels of scale and additionally mapped using kernel density estimation (KDE)]. GIS analyses in this study support our hypothesis that choice of geographic scale (neighborhood or census tract) for aggregated birth data can alter programmatic decision-making. Results indicate that the relative merits of aggregated visualization or the use of KDE technique depend on the scale of intervention. The KDE map proved useful in targeting specific areas for interventions in cities with smaller populations and larger census tracts, where they allow for greater specificity in identifying intervention areas. When public health programmers seek to inform intervention placement in highly populated areas, however, aggregated data at the census tract level may be preferred, since it requires lower investments in terms of time and cartographic skill and, unlike neighborhood, census tracts are standardized in that they become smaller as the population density of an area increases.

Analyzing rasters, vectors and time series using new Python interfaces in GRASS GIS 7

Science.gov (United States)

Petras, Vaclav; Petrasova, Anna; Chemin, Yann; Zambelli, Pietro; Landa, Martin; Gebbert, Sören; Neteler, Markus; Löwe, Peter

2015-04-01

helps researchers to ensure the robustness of the algorithm, correctness of the results in edge cases as well as the detection of changes in results due to new development. For all modules GRASS GIS automatically creates standardized command line and graphical user interfaces and documentation. Finally, we will show how GRASS GIS can be used together with powerful Python tools such as the NumPy package and the IPython Notebook. References: Gebbert, S., Pebesma, E., 2014. A temporal GIS for field based environmental modeling. Environmental Modelling & Software 53, 1-12. Neteler, M., Bowman, M.H., Landa, M. and Metz, M., 2012. GRASS GIS: a multi-purpose Open Source GIS. Environmental Modelling & Software 31: 124-130. Petras, V., Gebbert, S., 2014. Testing framework for GRASS GIS: ensuring reproducibility of scientific geospatial computing. Poster presented at: AGU Fall Meeting, December 15-19, 2014, San Francisco, USA. Zambelli, P., Gebbert, S., Ciolli, M., 2013. Pygrass: An Object Oriented Python Application Programming Interface (API) for Geographic Resources Analysis Support System (GRASS) Geographic Information System (GIS). ISPRS International Journal of Geo-Information 2, 201-219.

Using Web-Based GIS in Introductory Human Geography

Science.gov (United States)

Songer, Lynn C.

2010-01-01

Advocates for using a geographic information system (GIS) in education assert that GIS improves student learning. However, studies to clarify the relationship between learning and using GIS are still needed. This study examines the effects of using Web-based GIS maps in place of paper maps on students' geography content knowledge and motivation…

The Global Landscape of GIS in Secondary Education

Science.gov (United States)

Kerski, Joseph J.; Demirci, Ali; Milson, Andrew J.

2013-01-01

This study analyzes the status of GIS in schools in thirty-three countries and proposes recommendations for advancing the implementation and effectiveness of GIS in secondary education from an international perspective. Thirty-three countries have been evaluated in the study to assess the global landscape of educational GIS by analyzing how GIS is…

Quantum GIS plugin for Czech cadastral data

Directory of Open Access Journals (Sweden)

Anna Kratochvílová

2012-10-01

Full Text Available This paper presents new Quantum GIS plugin for Czech cadastral data and its development. QGIS is a rapidly developing cross-platform desktop Geographic Information System (GIS released under the GNU GPL. QGIS is written in C++, and uses the Qt library. The plugin is developed in C++, too. The new plugin can work with Czech cadastral data in the new Czech cadastral exchange data format called VFK (or NVF. Data are accessed through VFK driver of the OGR library. The plugin should facilitate the work with cadastral data by easy search and presenting well arranged information. Information is displayed in the way similar to web applications, thus the control is friendly and familiar for users. The plugin supports interaction with map using QGIS functionality and it is able to export various cadastral reports. This paper provides ideas which can be generalized to develop QGIS plugin dealing with specific data.

GIS Application System Design Applied to Information Monitoring

Science.gov (United States)

Qun, Zhou; Yujin, Yuan; Yuena, Kang

Natural environment information management system involves on-line instrument monitoring, data communications, database establishment, information management software development and so on. Its core lies in collecting effective and reliable environmental information, increasing utilization rate and sharing degree of environment information by advanced information technology, and maximizingly providing timely and scientific foundation for environmental monitoring and management. This thesis adopts C# plug-in application development and uses a set of complete embedded GIS component libraries and tools libraries provided by GIS Engine to finish the core of plug-in GIS application framework, namely, the design and implementation of framework host program and each functional plug-in, as well as the design and implementation of plug-in GIS application framework platform. This thesis adopts the advantages of development technique of dynamic plug-in loading configuration, quickly establishes GIS application by visualized component collaborative modeling and realizes GIS application integration. The developed platform is applicable to any application integration related to GIS application (ESRI platform) and can be as basis development platform of GIS application development.

Study on the action guidelines for medical support team for nuclear and radiological emergency

International Nuclear Information System (INIS)

Liu Chang'an; Liu Ying; Geng Xiusheng

2006-01-01

Objective: To study the action guidelines for medical support team for nuclear and radiological emergency. Methods: It is based on the experience and lessons learned in the course of meeting the emergencies preparedness and response of nuclear and radiological emergencies in China and abroad with the reference of the relevant reports of International Atomic Energy Agency. Results: Essential requirements and practical recommendations for the roles, responsibilities, emergency preparedness, principles and procedures of medical assistance at the scene, as well as the radiological protection of medical support team were provided. Conclusion: The document mentioned above can be applied to direct the establishment, effective medical preparedness and response of the medical support team for nuclear and radiological emergency. (authors)

Interprofessional communication supporting clinical handover in emergency departments: An observation study.

Science.gov (United States)

Redley, Bernice; Botti, Mari; Wood, Beverley; Bucknall, Tracey

2017-08-01

Poor interprofessional communication poses a risk to patient safety at change-of-shift in emergency departments (EDs). The purpose of this study was to identify and describe patterns and processes of interprofessional communication impacting quality of ED change-of-shift handovers. Observation of 66 change-of-shift handovers at two acute hospital EDs in Victoria, Australia. Focus groups with 34 nurse participants complemented the observations. Qualitative data analysis involved content and thematic methods. Four structural components of ED handover processes emerged represented by (ABCD): (1) Antecedents; (2) Behaviours and interactions; (3) Content; and (4) Delegation of ongoing care. Infrequent and ad hoc interprofessional communication and discipline-specific handover content and processes emerged as specific risks to patient safety at change-of-shift handovers. Three themes related to risky and effective practices to support interprofessional communications across the four stages of ED handovers emerged: 1) standard processes and practices, 2) teamwork and interactions and 3) communication activities and practices. Unreliable interprofessional communication can impact the quality of change-of-shift handovers in EDs and poses risk to patient safety. Structured reflective analysis of existing practices can identify opportunities for standardisation, enhanced team practices and effective communication across four stages of the handover process to support clinicians to enhance local handover practices. Future research should test and refine models to support analysis of practice, and identify and test strategies to enhance ED interprofessional communication to support clinical handovers. Copyright © 2017 College of Emergency Nursing Australasia. Published by Elsevier Ltd. All rights reserved.

A GIS-based decision support tool for renewable energy management and planning in semi-arid rural environments of northeast of Brazil

Energy Technology Data Exchange (ETDEWEB)

Tiba, C.; Fraidenraich, N.; Barbosa, E.M. de S. [Departamento de Energia Nuclear da Universidade Federal de Pernambuco, Av. Prof. Luiz Freire, 1000 - CDU, CEP 50.740-540, Recife, Pernambuco (Brazil); Candeias, A.L.B. [Departamento de Engenharia Cartografica da Universidade Federal de Pernambuco, Av. Academico Helio Ramos, s/n - CDU, Recife, Pernambuco (Brazil); de Carvalho Neto, P.B.; de Melo Filho, J.B. [Companhia Hidro Eletrica do Sao Francisco -DTG- CHESF, Recife, Pernambuco (Brazil)

2010-12-15

This work describes the development of a management and planning system on a GIS (Geographic Information System) platform destined to decision makers that is, administrators, planners or consultants in renewable energies. It was conceived to deal with the management and planning of solar systems, biomass and aeolics in rural regions of Brazil. The prototype of the GIS tool covers an area of 183, 500 km{sup 2} and is made up of three blocks: management of installed renewable systems, inclusion (planning) of new systems and updating of the data banks. The GISA SOL 1.0 (Geographic Information System Applied to Solar Energy) has a total of 80 layers of information that permit the realization of spatial analyses on management and planning of renewable sources of energy at macro-spatial (state) and local (municipality) levels. A description and the methodology used for its development and a description of the functionalities will be made here. The system was developed mainly for PV systems as a support tool for management and planning of the Energy Development Program for States and Municipalities (PRODEEM), a program for inclusion in large scale of solar photovoltaic energy in the rural environment, conducted by the Ministry of Mines and Energy of Brazil. (author)

Students individual engagement in GIS

DEFF Research Database (Denmark)

Madsen, Lene Møller; Christiansen, Frederik V; Rump, Camilla Østerberg

2014-01-01

This paper develops two sets of concepts to theorize why students engage differently in Geographical Information Systems (GIS). These theoretical concepts are used as an analytical lens to explore empirical data on the experiences and engagement of students enrolled in an undergraduate GIS course...... in planning and management. The analysis shows that both the theoretical perspectives and the custom and didactical contract are important to understand students' engagement in GIS. However, it is the personal desiderata that are the key to understanding the students' different engagement. Further, a temporal...... dimension and contextual awareness are important in understanding students' engagement in a broader perspective....

Integrating Online GIS into the K-12 Curricula: Lessons from the Development of a Collaborative GIS in Michigan

Science.gov (United States)

Henry, Paul; Semple, Hugh

2012-01-01

GIS has shown promise in Project Based Learning (PBL) environments, but many obstacles exist in its integration into school curriculums. This article discusses the development and utilization of an online GIS tool that was created to illustrate that the perceptual gap between relevance and ease of use of GIS software can be bridged at the K-12…

Pygrass: An Object Oriented Python Application Programming Interface (API for Geographic Resources Analysis Support System (GRASS Geographic Information System (GIS

Directory of Open Access Journals (Sweden)

Marco Ciolli

2013-03-01

Full Text Available PyGRASS is an object-oriented Python Application Programming Interface (API for Geographic Resources Analysis Support System (GRASS Geographic Information System (GIS, a powerful open source GIS widely used in academia, commercial settings and governmental agencies. We present the architecture of the PyGRASS library, covering interfaces to GRASS modules, vector and raster data, with a focus on the new capabilities that it provides to GRASS users and developers. Our design concept of the module interface allows the direct linking of inputs and outputs of GRASS modules to create process chains, including compatibility checks, process control and error handling. The module interface was designed to be easily extended to work with remote processing services (Web Processing Service (WPS, Web Service Definition Language (WSDL/Simple Object Access Protocol (SOAP. The new object-oriented Python programming API introduces an abstract layer that opens the possibility to use and access transparently the efficient raster and vector functions of GRASS that are implemented in C. The design goal was to provide an easy to use, but powerful, Python interface for users and developers who are not familiar with the programming language C and with the GRASS C-API. We demonstrate the capabilities, scalability and performance of PyGRASS with several dedicated tests and benchmarks. We compare and discuss the results of the benchmarks with dedicated C implementations.

E-DECIDER Decision Support Gateway For Earthquake Disaster Response

Science.gov (United States)

Glasscoe, M. T.; Stough, T. M.; Parker, J. W.; Burl, M. C.; Donnellan, A.; Blom, R. G.; Pierce, M. E.; Wang, J.; Ma, Y.; Rundle, J. B.; Yoder, M. R.

2013-12-01

Earthquake Data Enhanced Cyber-Infrastructure for Disaster Evaluation and Response (E-DECIDER) is a NASA-funded project developing capabilities for decision-making utilizing remote sensing data and modeling software in order to provide decision support for earthquake disaster management and response. E-DECIDER incorporates earthquake forecasting methodology and geophysical modeling tools developed through NASA's QuakeSim project in order to produce standards-compliant map data products to aid in decision-making following an earthquake. Remote sensing and geodetic data, in conjunction with modeling and forecasting tools, help provide both long-term planning information for disaster management decision makers as well as short-term information following earthquake events (i.e. identifying areas where the greatest deformation and damage has occurred and emergency services may need to be focused). E-DECIDER utilizes a service-based GIS model for its cyber-infrastructure in order to produce standards-compliant products for different user types with multiple service protocols (such as KML, WMS, WFS, and WCS). The goal is to make complex GIS processing and domain-specific analysis tools more accessible to general users through software services as well as provide system sustainability through infrastructure services. The system comprises several components, which include: a GeoServer for thematic mapping and data distribution, a geospatial database for storage and spatial analysis, web service APIs, including simple-to-use REST APIs for complex GIS functionalities, and geoprocessing tools including python scripts to produce standards-compliant data products. These are then served to the E-DECIDER decision support gateway (http://e-decider.org), the E-DECIDER mobile interface, and to the Department of Homeland Security decision support middleware UICDS (Unified Incident Command and Decision Support). The E-DECIDER decision support gateway features a web interface that

BUILDING A COMPLETE FREE AND OPEN SOURCE GIS INFRASTRUCTURE FOR HYDROLOGICAL COMPUTING AND DATA PUBLICATION USING GIS.LAB AND GISQUICK PLATFORMS

Directory of Open Access Journals (Sweden)

M. Landa

2017-07-01

Full Text Available Building a complete free and open source GIS computing and data publication platform can be a relatively easy task. This paper describes an automated deployment of such platform using two open source software projects – GIS.lab and Gisquick. GIS.lab (http: //web.gislab.io is a project for rapid deployment of a complete, centrally managed and horizontally scalable GIS infrastructure in the local area network, data center or cloud. It provides a comprehensive set of free geospatial software seamlessly integrated into one, easy-to-use system. A platform for GIS computing (in our case demonstrated on hydrological data processing requires core components as a geoprocessing server, map server, and a computation engine as eg. GRASS GIS, SAGA, or other similar GIS software. All these components can be rapidly, and automatically deployed by GIS.lab platform. In our demonstrated solution PyWPS is used for serving WPS processes built on the top of GRASS GIS computation platform. GIS.lab can be easily extended by other components running in Docker containers. This approach is shown on Gisquick seamless integration. Gisquick (http://gisquick.org is an open source platform for publishing geospatial data in the sense of rapid sharing of QGIS projects on the web. The platform consists of QGIS plugin, Django-based server application, QGIS server, and web/mobile clients. In this paper is shown how to easily deploy complete open source GIS infrastructure allowing all required operations as data preparation on desktop, data sharing, and geospatial computation as the service. It also includes data publication in the sense of OGC Web Services and importantly also as interactive web mapping applications.

Improvment, extension and integration of operational decision support systems for nuclear emergency management (DSSNET)

International Nuclear Information System (INIS)

Ehrhardt, J.

2005-07-01

The DSSNET network was established in October 2000 with the overall objective to create an effective and accepted framework for better communication and understanding between the community of institutions involved in operational off-site emergency management and the many and diverse RTD institutes further developing methods and tools in this area, in particular decision support systems (DSS), for making well informed and consistent judgements with respect to practical improvements of emergency response in Europe. 37 institutions from 21 countries of East and West Europe have been members of the network with about half of them responsible for operational emergency management. The objectives of the network have been numerous and the more important ones include: to ensure that future RTD is more responsive to user needs, to inform the user community of new developments and their potential for improving emergency response, to improve operational decision support systems from feedback of operational experience, to identify how information and data exchange between countries can be improved, to promote greater coherence among operational decision support systems and to encourage shared development of new and improved decision support systems features, and to improve the practicability of operational decision support systems. To stimulate the communication and feedback between the operational and the RTD community, problem-oriented emergency exercises were performed, which covered the various time phases of an accident and which extended from the near range to farther distances with frontier crossing transport of radionuclides. The report describes the objectives of the DSSNET, the five emergency exercises performed and the results of their evaluation. They provided valuable insight and lessons for operators and users of decision support systems, in particular the need for much more intensive training and exercising with decision support systems and their interaction with

Programming ArcGIS 10.1 with Python cookbook

CERN Document Server

Pimpler, Eric

2013-01-01

This book is written in a helpful, practical style with numerous hands-on recipes and chapters to help you save time and effort by using Python to power ArcGIS to create shortcuts, scripts, tools, and customizations.""Programming ArcGIS 10.1 with Python Cookbook"" is written for GIS professionals who wish to revolutionize their ArcGIS workflow with Python. Basic Python or programming knowledge is essential(?).

Designing a data-driven decision support tool for nurse scheduling in the emergency department: a case study of a southern New Jersey emergency department.

Science.gov (United States)

Otegbeye, Mojisola; Scriber, Roslyn; Ducoin, Donna; Glasofer, Amy

2015-01-01

A health system serving Burlington and Camden Counties, New Jersey, sought to improve labor productivity for its emergency departments, with emphasis on optimizing nursing staff schedules. Using historical emergency department visit data and operating constraints, a decision support tool was designed to recommend the number of emergency nurses needed in each hour for each day of the week. The pilot emergency department nurse managers used the decision support tool's recommendations to redeploy nurse hours from weekends into a float pool to support periods of demand spikes on weekdays. Productivity improved significantly, with no unfavorable impact on patient throughput, and patient and staff satisfaction. Today's emergency department manager can leverage the increasing ease of access to the emergency department information system's data repository to successfully design a simple but effective tool to support the alignment of its nursing schedule with demand patterns. Copyright © 2015 Emergency Nurses Association. Published by Elsevier Inc. All rights reserved.

Decision Support for Flood Event Prediction and Monitoring

DEFF Research Database (Denmark)

Mioc, Darka; Anton, François; Liang, Gengsheng

2007-01-01

In this paper the development of Web GIS based decision support system for flood events is presented. To improve flood prediction we developed the decision support system for flood prediction and monitoring that integrates hydrological modelling and CARIS GIS. We present the methodology for data...... integration, floodplain delineation, and online map interfaces. Our Web-based GIS model can dynamically display observed and predicted flood extents for decision makers and the general public. The users can access Web-based GIS that models current flood events and displays satellite imagery and digital...... elevation model integrated with flood plain area. The system can show how the flooding prediction based on the output from hydrological modeling for the next 48 hours along the lower Saint John River Valley....

Demonstration of Hadoop-GIS: A Spatial Data Warehousing System Over MapReduce.

Science.gov (United States)

Aji, Ablimit; Sun, Xiling; Vo, Hoang; Liu, Qioaling; Lee, Rubao; Zhang, Xiaodong; Saltz, Joel; Wang, Fusheng

2013-11-01

The proliferation of GPS-enabled devices, and the rapid improvement of scientific instruments have resulted in massive amounts of spatial data in the last decade. Support of high performance spatial queries on large volumes data has become increasingly important in numerous fields, which requires a scalable and efficient spatial data warehousing solution as existing approaches exhibit scalability limitations and efficiency bottlenecks for large scale spatial applications. In this demonstration, we present Hadoop-GIS - a scalable and high performance spatial query system over MapReduce. Hadoop-GIS provides an efficient spatial query engine to process spatial queries, data and space based partitioning, and query pipelines that parallelize queries implicitly on MapReduce. Hadoop-GIS also provides an expressive, SQL-like spatial query language for workload specification. We will demonstrate how spatial queries are expressed in spatially extended SQL queries, and submitted through a command line/web interface for execution. Parallel to our system demonstration, we explain the system architecture and details on how queries are translated to MapReduce operators, optimized, and executed on Hadoop. In addition, we will showcase how the system can be used to support two representative real world use cases: large scale pathology analytical imaging, and geo-spatial data warehousing.

Soil Erosion Analysis in a Small Forested Catchment Supported by ArcGIS Model Builder

Directory of Open Access Journals (Sweden)

CSÁFORDI, Péter

2012-01-01

Full Text Available To implement the analysis of soil erosion with the USLE in a GIS environment, a new workflow has been developed with the ArcGIS Model Builder. The aim of this four-part framework is to accelerate data processing and to ensure comparability of soil erosion risk maps. The first submodel generates the stream network with connected catchments, computes slope conditions and the LS factor in USLE based on the DEM. The second submodel integrates stream lines, roads, catchment boundaries, land cover, land use, and soil maps. This combined dataset is the basis for the preparation of other USLE-factors. The third submodel estimates soil loss, and creates zonal statistics of soil erosion. The fourth submodel classifies soil loss into categories enabling the comparison of modelled and observed soil erosion. The framework was applied in a small forested catchment in Hungary. Although there is significant deviation between the erosion of different land covers, the predicted specific soil loss does not increase above the tolerance limit in any area unit. The predicted surface soil erosion in forest subcompartments mostly depends on the slope conditions.

GIS Based Measurement and Regulatory Zoning of Urban Ecological Vulnerability

Directory of Open Access Journals (Sweden)

Xiaorui Zhang

2015-07-01

Full Text Available Urban ecological vulnerability is measured on the basis of ecological sensitivity and resilience based on the concept analysis of vulnerability. GIS-based multicriteria decision analysis (GIS-MCDA methods are used, supported by the spatial analysis tools of GIS, to define different levels of vulnerability for areas of the urban ecology. These areas are further classified into different types of regulatory zones. Taking the city of Hefei in China as the empirical research site, this study uses GIS-MCDA, including the index system, index weights and overlay rules, to measure the degree of its ecological vulnerability on the GIS platform. There are eight indices in the system. Raking and analytical hierarchy process (AHP methods are used to calculate index weights according to the characteristics of the index system. The integrated overlay rule, including selection of the maximum value, and weighted linear combination (WLC are applied as the overlay rules. In this way, five types of vulnerability areas have been classified as follows: very low vulnerability, low vulnerability, medium vulnerability, high vulnerability and very high vulnerability. They can be further grouped into three types of regulatory zone of ecological green line, ecological grey line and ecological red line. The study demonstrates that ecological green line areas are the largest (53.61% of the total study area and can be intensively developed; ecological grey line areas (19.59% of the total area can serve as the ecological buffer zone, and ecological red line areas (26.80% cannot be developed and must be protected. The results indicate that ecological green line areas may provide sufficient room for future urban development in Hefei city. Finally, the respective regulatory countermeasures are put forward. This research provides a scientific basis for decision-making around urban ecological protection, construction and sustainable development. It also provides theoretical method

Improving the GIS-DRP Approach by Means of DelineatingRunoff Characteristics with New Discharge Relevant Parameters

Directory of Open Access Journals (Sweden)

Marco Hümann

2013-01-01

Full Text Available At present it is common to use geographic information system (GIS applications to assess runoff generation. One of these GIS-based tools to generate maps of dominant runoff processes is the so called GIS-DRP approach. The tool, which has been developed mainly based on agricultural areas, uses commonly available input data like a digital elevation model (DEM, geological information as well as land use information. The aim of this study is to test, validate and improve this GIS-DRP method for forested and silviculture areas. Hence, soil-hydrologic investigations and several mapping techniques of dominant runoff processes were conducted on 25 test-plots in four forested catchments in Rhineland-Palatinate (Germany and the Grand Duchy of Luxembourg. By comparing the results of the mapping techniques and those of the test plots, weak points in the original GIS-DRP method were detected. Subsequently, it was possible to enhance the GIS-DRP approach by incorporating new discharge relevant parameters like topsoil sealing, extreme weather events and semipermeability of the substratum. Moreover, the improved GIS-DRP approach can be widely used in different landscapes and for different fields of application. The adapted method can now support foresters and decision makers in forestry planning, answer questions concerning the landscape water balance and peripheral water retention or provide extra information for sustainable forest planning in times of a changing climate.

Students Individual Engagement in GIS

Science.gov (United States)

Madsen, Lene Møller; Christiansen, Frederik; Rump, Camilla

2014-01-01

This paper develops two sets of concepts to theorize why students engage differently in Geographical Information Systems (GIS). These theoretical concepts are used as an analytical lens to explore empirical data on the experiences and engagement of students enrolled in an undergraduate GIS course in planning and management. The analysis shows that…

Teaching with a GIS using existing grade 7--12 curricula

Science.gov (United States)

Brown, Stephen Castlebury

As Geographic Information Systems (GIS) become less expensive and easier to use, the demand for individuals knowledgeable of this technology increases. Associated with this is the current and future necessity of a public who understands the wide range of technical proficiencies needed for accurate GIS mapping. On a nationwide basis, GIS education in K--12 schools is rare. In the few instances where a school teaches students about these technologies, it is usually led by a single teacher and is not taught on a school-wide basis. This situation exists despite some research indicating that a classroom GIS might enhance the learning of students. Two primary barriers to teacher use and acceptance of a classroom GIS have been identified. First, most teachers lack any training in the use of a GIS. Secondly, there is conflict over focusing upon teaching about the use of a GIS or teaching with a GIS. Beginning in August of 1996 and concluding in August of 1998, nine separate GIS education programs were conducted for a variety of youths and adult educator audiences. Observations of participant's interactions with the GIS program ArcView would lead to the development of a demonstration curriculum and GIS application. To overcome institutional and educational barriers to youth GIS education, a curriculum partly adapted from existing materials and partly created from original materials was developed in Hypertext Markup Language (HTML). A corresponding GIS application was developed to teach about a GIS while instructing with a GIS. The curriculum was distributed for use on CD-ROM and called Georom. The hypertext curriculum provided lessons and exercises that addressed National Science Education Standards and was accessed using an Internet web browser. The curriculum included World Wide Web links to Internet sites with more information about specific topics. Modifications were made to ArcView's Graphical User Interface (GUI) that maintained the general appearance of its standard

Application of GIS in Beach Placer Exploration

International Nuclear Information System (INIS)

Babu, M.N.

2016-01-01

Application of Geographic Information System (GIS) in beach placer exploration combines the activities of data collection, organisation, visualisation, query, analysis and prediction. GIS has the potential to enhance the capability for creative data analysis, modelling and interpretation. Exploration software and GIS are essential tools for geoscientists searching for mineral deposits. GIS technology has come a long way in the past fifteen years, especially in data handling, analysis, visualization etc. Modern technology and solutions are now evolving to allow geoscientists to share data easily between mapping platforms and enterprise level GIS environments. In beach placer exploration programme, data handling and processing are the main challenging tasks due to generation and processing of large volume of field and laboratory data of the areas under investigation. Though there are limitations in visualising map data as a single map on a screen, due to its non-proportionate lengths and widths, a GIS can very well handle all these varied datasets to demarcate highly potential zones within a narrow coastal strip. Generally these datasets contain information from thousands of drillholes about their location co-ordinates, depth, height, description and thickness of lithounits, water table level, radioactivity and other pertinent subsurface properties. Field data collection can be efficiently done using a hand held global positioning system (GPS) installed with mobile-GIS application and data handling software

An Assessment of the Emerging Networks of Support for Street ...

African Journals Online (AJOL)

Nigeria, being asignatory to the Convention on the Rights of the Child (UNCRC, 1989) promulgated the Child Rights Act 2003, which aimed at ameliorating the condition of street children in Nigeria. In line with this, there are emerging networks of support for street children. The extent to which these support networks are ...

Visualizing Economic Development with ArcGIS Explorer

Science.gov (United States)

Webster, Megan L.; Milson, Andrew J.

2011-01-01

Numerous educators have noted that Geographic Information Systems (GIS) is a powerful tool for social studies teaching and learning. Yet the use of GIS has been hampered by issues such as the cost of the software and the management of large spatial data files. One trend that shows great promise for GIS in education is the move to cloud computing.…

Public Participation GIS

DEFF Research Database (Denmark)

Hansen, Henning Sten

2004-01-01

The protection and enhancement of the environment is the main aim of most environmental planning, and the use of geographic information as well as public participation can improve the quality of both the processes and the decisions. The current paper describes the role of web-based geographic...... information in environmental planning and gives an overview over the various approaches to public participation. The current advances in Web-based GIS in many countries contain great possibilities for supporting good governance based on information and knowledge on the one hand and active involvement...... of the citizens on the other hand. One important precondition for success in this field is a well-informed population with access to the Internet. The overall purpose of this paper is to give en overview of how to utilise geographic information and public participation as natural components in environmental...

GIS in geoscience education- geomorphometric study

Digital Repository Service at National Institute of Oceanography (India)

Mahender, K.; Yogita, K.; Kunte, P.D.

The educational institutions around the world have realised the possibility of using GIS in geosciences teaching along with in many other subjects. GIS is been used in a large number of geoscience applications viz. mapping, mineral and petroleum...

GIS as a tool for managing radiological areas in Los Alamos

International Nuclear Information System (INIS)

Johnson, S.L.; Lloyd, S.C.; Wenzel, W.J.

1995-01-01

This report presents details about the GIS information system development to support reporting requirements of occupational safety regulations. This system is being designed to give information about the level of radiation in an area and to make this information readily available to all workers before entering any area

Decision support systems in nuclear emergencies: harmonizing domestic and reference tools

International Nuclear Information System (INIS)

Vamanu, D.; Mateescu, Gh.; Berinde, A.; Slavnicu, D.; Acasandrei, V.; Slavnicu, E.

2001-01-01

The paper addresses the issue of securing the compatibility and inter-operability of computer packages designed to perform as decision support tools in the management of radiological emergencies, over the transition times towards the implementation and uniform acceptance and uniform acceptance of internationally-shared reference tools such as the European Union's RODOS (Real Time On-Line Decision Support System for Off-Site Nuclear Emergencies in Europe). One submits that a harmonization between the currently operational, domestic, and the reference tool can be contemplated, based on extensive code comparison and benchmarking. A case in point is presented, paralleling selected RODOS applications on simulated abnormal nuclear events, and the concurrent application of a resident software package, NOTEPAD, developed to emulate RODOS-wise function at IFIH-HH Bucharest. The reproducible similarity may make domestic decision support system (DSS) facilities useful as both practical tools and factors promoting the emergency preparedness awareness, during the interim time laps till the full development and deployment of RODOS as a reference DSS in Europe. (authors)

On Using GIS to Teach in the Social Sciences

Science.gov (United States)

Harris, Jill S.

2012-01-01

In this article, the author discusses how a professor can harness the power of Geographic Information Systems (GIS) and use GIS to teach in the social sciences. She shows examples of how GIS can illustrate concepts during lecture or discussion, and provides two specific GIS assignments: one for undergraduate students and the other for graduate…

Using Geographic Information Systems (GIS) to understand a community's primary care needs.

Science.gov (United States)

Dulin, Michael F; Ludden, Thomas M; Tapp, Hazel; Blackwell, Joshua; de Hernandez, Brisa Urquieta; Smith, Heather A; Furuseth, Owen J

2010-01-01

A key element for reducing health care costs and improving community health is increased access to primary care and preventative health services. Geographic information systems (GIS) have the potential to assess patterns of health care utilization and community-level attributes to identify geographic regions most in need of primary care access. GIS, analytical hierarchy process, and multiattribute assessment and evaluation techniques were used to examine attributes describing primary care need and identify areas that would benefit from increased access to primary care services. Attributes were identified by a collaborative partnership working within a practice-based research network using tenets of community-based participatory research. Maps were created based on socioeconomic status, population density, insurance status, and emergency department and primary care safety-net utilization. Individual and composite maps identified areas in our community with the greatest need for increased access to primary care services. Applying GIS to commonly available community- and patient-level data can rapidly identify areas most in need of increased access to primary care services. We have termed this a Multiple Attribute Primary Care Targeting Strategy. This model can be used to plan health services delivery as well as to target and evaluate interventions designed to improve health care access.

USING GIS AND AHP FOR PLANNING PRIMER TRANSPORTATION OF FOREST PRODUCTS

Directory of Open Access Journals (Sweden)

A. E. Akay

2017-11-01

Full Text Available Primer transportation is one of the most costly and time consuming forestry activities in extraction of timber from forest lands. Transportation methods are essentially determined based on terrain characteristics, especially ground slope. Besides, unsuitable machine selection and unplanned operations may cause ecological damages such as soil disturbance. Soil damage can lead to long term impacts on forest ecosystem. Thus, the optimum transportation methods should be determined by considering not only economic factors but also topographical factors and soil conditions. In recent decades, some of the advanced features of Geographical Information System (GIS assist decision makers to solve such complex transportation problems with various constraints. In this study, it was aimed to plan forest transportation operation by using GIS integrated Analytical Hierarchy Process (AHP method, considering ground slope, soil type, and available transportation equipment in the region. This method was implemented within the border of İnegöl Forest Enterprise Chief in the city of Bursa in Turkey. Alternative transportation method included cable system, chute system, skidder, and farm tractor. GIS-based method integrated with AHP found that skidder was the optimal transportation method for about 60% of the study area, while farm tractor was the second most suitable method with 25% ground cover. The results indicated that GIS-based decision support systems can be effectively used as rational, quick, and economic tool for forest transportation planning.

Modelling Multi Hazard Mapping in Semarang City Using GIS-Fuzzy Method

Science.gov (United States)

Nugraha, A. L.; Awaluddin, M.; Sasmito, B.

2018-02-01

One important aspect of disaster mitigation planning is hazard mapping. Hazard mapping can provide spatial information on the distribution of locations that are threatened by disaster. Semarang City as the capital of Central Java Province is one of the cities with high natural disaster intensity. Frequent natural disasters Semarang city is tidal flood, floods, landslides, and droughts. Therefore, Semarang City needs spatial information by doing multi hazard mapping to support disaster mitigation planning in Semarang City. Multi Hazards map modelling can be derived from parameters such as slope maps, rainfall, land use, and soil types. This modelling is done by using GIS method with scoring and overlay technique. However, the accuracy of modelling would be better if the GIS method is combined with Fuzzy Logic techniques to provide a good classification in determining disaster threats. The Fuzzy-GIS method will build a multi hazards map of Semarang city can deliver results with good accuracy and with appropriate threat class spread so as to provide disaster information for disaster mitigation planning of Semarang city. from the multi-hazard modelling using GIS-Fuzzy can be known type of membership that has a good accuracy is the type of membership Gauss with RMSE of 0.404 the smallest of the other membership and VAF value of 72.909% of the largest of the other membership.

URBAN RAIN GAUGE SITING SELECTION BASED ON GIS-MULTICRITERIA ANALYSIS

Directory of Open Access Journals (Sweden)

Y. Fu

2016-06-01

Full Text Available With the increasingly rapid growth of urbanization and climate change, urban rainfall monitoring as well as urban waterlogging has widely been paid attention. In the light of conventional siting selection methods do not take into consideration of geographic surroundings and spatial-temporal scale for the urban rain gauge site selection, this paper primarily aims at finding the appropriate siting selection rules and methods for rain gauge in urban area. Additionally, for optimization gauge location, a spatial decision support system (DSS aided by geographical information system (GIS has been developed. In terms of a series of criteria, the rain gauge optimal site-search problem can be addressed by a multicriteria decision analysis (MCDA. A series of spatial analytical techniques are required for MCDA to identify the prospective sites. With the platform of GIS, using spatial kernel density analysis can reflect the population density; GIS buffer analysis is used to optimize the location with the rain gauge signal transmission character. Experiment results show that the rules and the proposed method are proper for the rain gauge site selection in urban areas, which is significant for the siting selection of urban hydrological facilities and infrastructure, such as water gauge.

Integration of CAD and GIS technology using ArcGIS for development of building information systems

Directory of Open Access Journals (Sweden)

Cvetinović Jelena M.

2014-01-01

Full Text Available Paper will present basic definitions and significance of implementation of information systems for facility maintenance, as well as terms Facility management (FM and FM lifecycle. The main focus of this paper is on CAD and GIS integration within ArcGIS software in order to consolidate different data formats for creating unique information system for FM.

Development of Pediatric Neurologic Emergency Life Support Course: A Preliminary Report.

Science.gov (United States)

Haque, Anwarul; Arif, Fehmina; Abass, Qalab; Ahmed, Khalid

2017-11-01

Acute neurological emergencies (ANEs) in children are common life-threatening illnesses and are associated with high mortality and severe neurological disability in survivors, if not recognized early and treated appropriately. We describe our experience of teaching a short, novel course "Pediatric Neurologic Emergency Life Support" to pediatricians and trainees in a resource-limited country. This course was conducted at 5 academic hospitals from November 2013 to December 2014. It is a hybrid of pediatric advance life support and emergency neurologic life support. This course is designed to increase knowledge and impart practical training on early recognition and timely appropriate treatment in the first hour of children with ANEs. Neuroresuscitation and neuroprotective strategies are key components of this course to prevent and treat secondary injuries. Four cases of ANEs (status epilepticus, nontraumatic coma, raised intracranial pressure, and severe traumatic brain injury) were taught as a case simulation in a stepped-care, protocolized approach based on best clinical practices with emphasis on key points of managements in the first hour. Eleven courses were conducted during the study period. One hundred ninety-six physicians including 19 consultants and 171 residents participated in these courses. The mean (SD) score was 65.15 (13.87%). Seventy percent (132) of participants were passed (passing score > 60%). The overall satisfaction rate was 85%. Pediatric Neurologic Emergency Life Support was the first-time delivered educational tool to improve outcome of children with ANEs with good achievement and high satisfaction rate of participants. Large number courses are required for future validation.

GIS In-Service Teacher Training Based on TPACK

Science.gov (United States)

Hong, Jung Eun; Stonier, Francis

2015-01-01

This article introduces the geographic information systems (GIS) in-service teacher training, focusing on the intersection of technological, pedagogical, and content knowledge (TPACK) for successful implementation of GIS in the classroom. Eleven social studies teachers in Georgia learned GIS technologies, inquiry-based learning, and social studies…

GIS embedded hydrological modeling: the SID&GRID project

Science.gov (United States)

Borsi, I.; Rossetto, R.; Schifani, C.

2012-04-01

The SID&GRID research project, started April 2010 and funded by Regione Toscana (Italy) under the POR FSE 2007-2013, aims to develop a Decision Support System (DSS) for water resource management and planning based on open source and public domain solutions. In order to quantitatively assess water availability in space and time and to support the planning decision processes, the SID&GRID solution consists of hydrological models (coupling 3D existing and newly developed surface- and ground-water and unsaturated zone modeling codes) embedded in a GIS interface, applications and library, where all the input and output data are managed by means of DataBase Management System (DBMS). A graphical user interface (GUI) to manage, analyze and run the SID&GRID hydrological models based on open source gvSIG GIS framework (Asociación gvSIG, 2011) and a Spatial Data Infrastructure to share and interoperate with distributed geographical data is being developed. Such a GUI is thought as a "master control panel" able to guide the user from pre-processing spatial and temporal data, running the hydrological models, and analyzing the outputs. To achieve the above-mentioned goals, the following codes have been selected and are being integrated: 1. Postgresql/PostGIS (PostGIS, 2011) for the Geo Data base Management System; 2. gvSIG with Sextante (Olaya, 2011) geo-algorithm library capabilities and Grass tools (GRASS Development Team, 2011) for the desktop GIS; 3. Geoserver and Geonetwork to share and discover spatial data on the web according to Open Geospatial Consortium; 4. new tools based on the Sextante GeoAlgorithm framework; 5. MODFLOW-2005 (Harbaugh, 2005) groundwater modeling code; 6. MODFLOW-LGR (Mehl and Hill 2005) for local grid refinement; 7. VSF (Thoms et al., 2006) for the variable saturated flow component; 8. new developed routines for overland flow; 9. new algorithms in Jython integrated in gvSIG to compute the net rainfall rate reaching the soil surface, as input for

GIS and the Social Sciences : Theory and Applications

NARCIS (Netherlands)

Ballas, Dimitris; Clarke, Graham; Franklin, Rachel S.; Newing, Andy

2017-01-01

GIS and the Social Sciences offers a uniquely social science approach on the theory and application of GIS with a range of modern examples. It explores how human geography can engage with a variety of important policy issues through linking together GIS and spatial analysis, and demonstrates the

Development of the re-engineered European decision support system for off-site nuclear and radiological emergencies - JRODOS. Application to air pollution transport modelling

International Nuclear Information System (INIS)

Ievdin, I.; Treebushny, D.; Raskob, W.; Zheleznyak, M.

2008-01-01

Full text: The European decision support system for nuclear and radiological emergencies RODOS includes a set of numerical models simulating the transport of radionuclides in the environment, estimating potential doses to the public and simulating and evaluating the efficiency of countermeasures. The re-engineering of the RODOS system using the Java technology has started recently which will allow to apply the new system called JRODOS on nearly any computational platform running Java virtual machine. Modern software development approaches were used for the JRODOS system architecture and implementation: distributed system design (client, management server, computational server), geo-database utilization, plug-in model structure and OpenMI-like compatibility to support seamless model inter-connection. Stable open source components such as an ORM solution (Hibernate), an OpenGIS component (Geotools) and a charting/reporting component (JFree, Pentaho) were utilized to optimize the development effort and allow a fast completion of the project. The architecture of the system is presented and illustrated for the atmospheric dispersion module ALSMC (Atmospheric Local Scale Model Chain) performing calculations of atmospheric pollution transport and the corresponding acute doses and dose rates. The example application is based on a synthetic scenario of a release from a nuclear power plant located in Europe. (author)

Geographical Information Systems (GIS); Sistemas de Informacion Geografica

Energy Technology Data Exchange (ETDEWEB)

Garcia Santiago, P.A. [Inisel Espacio, Madrid (Spain)

1994-12-31

Geographical Information Systems (GIS) have converted in a computer`s tool that due of its great versatility, exceeds of its usage as Basic Cartography Manager. The best GIS to use (vector or raster) will depend on the type of data we work with, we should keep in mind that the use of a specific GIS does not mean total incompatibility with others GIS. Future tendencies in this field aim to Data Storage Optimization and to Shared Operating System between Workstations and Personal computers. (Author)

GIS - An open window for environmental protection at nuclear power plants

International Nuclear Information System (INIS)

Zaplaic, M.; Iliuta, S.; Zaplaic, T.; Dragomir, A.; Zisu, D.; Deneanu, A.

2008-01-01

Full text: GIS platforms provide a useful tool to organize, analyze and illustrate geographically linked data. The combination between layers of general interest (traffic, water bodies, land cover, territorially - administrative units, landscape, a.s.o.) and those concerning the environmental protection at nuclear plants (industrial perimeter, pollution sources, risk zones, radioactivity maps based on monitoring data, etc.) could be used to illustrate potential or actual impacts, to assist risk analysis and emergency planning, and to facilitate the decision making. (authors)

Wireless mobile field-based GIS science and technology for crisis management process: A case study of a fire event, Cairo, Egypt

Directory of Open Access Journals (Sweden)

I.H. EL-Gamily

2010-06-01

Full Text Available Wireless GIS services have been evolving from scientific and technological perspectives through the last two decades. These services include both the location-based services (LBS and the mobile field-based GIS. Whereas the former provides the user with the capability to access and query the already established enterprise geo-database, the latter enables the end user not only to access and query but also to update the geo-database by a near real-time spatial and non-spatial data. However, to establish a mobile field-based GIS facility, a concise system architecture should be designed. This architecture includes client-side components, wireless communication facility, and server components. The integration and automation of these components can provide the capability to collect, update, validate, and query the enterprise geo-database remotely in a near real-time mode. One of the potential fields of applications for the mobile field-based GIS is the crisis management process. A prescribed system has been previously defined as emergency response cycle for managing both the natural and the man-made crises. Three phases of the emergency response cycle are outlined which are the response and rescue phase, the recovery and reconstruction phase, and mitigation and preparedness phase. In each phase, various tasks are undertaken based on the type of the event. Selective tasks of the response and the rescue phase of the fire event occurred in the Sheraton Exchange Center have been chosen to check the validity of using the mobile field-based GIS for enhancing the performance of these tasks. These tasks are path selection and quick damage estimates.

GIS Support for Flood Rescue

DEFF Research Database (Denmark)

Liang, Gengsheng; Mioc, Darka; Anton, François

2007-01-01

Under flood events, the ground traffic is blocked in and around the flooded area due to damages to roads and bridges. The traditional transportation network may not always help people to make a right decision for evacuation. In order to provide dynamic road information needed for flood rescue, we...... to retrieve the shortest and safest route in Fredericton road network during flood event. It enables users to make a timely decision for flood rescue. We are using Oracle Spatial to deal with emergency situations that can be applied to other constrained network applications as well....... developed an adaptive web-based transportation network application using Oracle technology. Moreover, the geographic relationships between the road network and flood areas are taken into account. The overlay between the road network and flood polygons is computed on the fly. This application allows users...

A task-based support architecture for developing point-of-care clinical decision support systems for the emergency department.

Science.gov (United States)

Wilk, S; Michalowski, W; O'Sullivan, D; Farion, K; Sayyad-Shirabad, J; Kuziemsky, C; Kukawka, B

2013-01-01

The purpose of this study was to create a task-based support architecture for developing clinical decision support systems (CDSSs) that assist physicians in making decisions at the point-of-care in the emergency department (ED). The backbone of the proposed architecture was established by a task-based emergency workflow model for a patient-physician encounter. The architecture was designed according to an agent-oriented paradigm. Specifically, we used the O-MaSE (Organization-based Multi-agent System Engineering) method that allows for iterative translation of functional requirements into architectural components (e.g., agents). The agent-oriented paradigm was extended with ontology-driven design to implement ontological models representing knowledge required by specific agents to operate. The task-based architecture allows for the creation of a CDSS that is aligned with the task-based emergency workflow model. It facilitates decoupling of executable components (agents) from embedded domain knowledge (ontological models), thus supporting their interoperability, sharing, and reuse. The generic architecture was implemented as a pilot system, MET3-AE--a CDSS to help with the management of pediatric asthma exacerbation in the ED. The system was evaluated in a hospital ED. The architecture allows for the creation of a CDSS that integrates support for all tasks from the task-based emergency workflow model, and interacts with hospital information systems. Proposed architecture also allows for reusing and sharing system components and knowledge across disease-specific CDSSs.

Development of Rural Emergency Medical System (REMS) with Geospatial Technology in Malaysia

Science.gov (United States)

Ooi, W. H.; Shahrizal, I. M.; Noordin, A.; Nurulain, M. I.; Norhan, M. Y.

2014-02-01

Emergency medical services are dedicated services in providing out-of-hospital transport to definitive care or patients with illnesses and injuries. In this service the response time and the preparedness of medical services is of prime importance. The application of space and geospatial technology such as satellite navigation system and Geographical Information System (GIS) was proven to improve the emergency operation in many developed countries. In collaboration with a medical service NGO, the National Space Agency (ANGKASA) has developed a prototype Rural Emergency Medical System (REMS), focusing on providing medical services to rural areas and incorporating satellite based tracking module integrated with GIS and patience database to improve the response time of the paramedic team during emergency. With the aim to benefit the grassroots community by exploiting space technology, the project was able to prove the system concept which will be addressed in this paper.

Gis and public health

CERN Document Server

Cromley, Ellen K

2011-01-01

Authoritative and comprehensive, this is the leading text and professional resource on using geographic information systems (GIS) to analyze and address public health problems. Basic GIS concepts and tools are explained, including ways to access and manage spatial databases. The book presents state-of-the-art methods for mapping and analyzing data on population, health events, risk factors, and health services, and for incorporating geographical knowledge into planning and policy. Numerous maps, diagrams, and real-world applications are featured. The companion Web page provides lab exercises w

Sensuous and Reflexive GIS: exploring visualisation and VRML

Directory of Open Access Journals (Sweden)

Mark Gillings

1996-09-01

Full Text Available Over the last five years, landscape-based archaeological research has been transformed as the widespread introduction of Geographical Information Systems (GIS has begun to revolutionise the way we, as archaeologists, manage and manipulate spatial information. As GIS-based applications begin to reach maturity and the role of GIS as a flexible mechanism for the articulation, exploration and analysis of landscape data becomes more fully realised, GIS is increasingly being seen as much as a place to think as a simple data management and mapping tool.

WebEQ: a web-GIS System to collect, display and query data for the management of the earthquake emergency in Central Italy

Science.gov (United States)

Carbone, Gianluca; Cosentino, Giuseppe; Pennica, Francesco; Moscatelli, Massimiliano; Stigliano, Francesco

2017-04-01

After the strong earthquakes that hit central Italy in recent months, the Center for Seismic Microzonation and its applications (CentroMS) was commissioned by the Italian Department of Civil Protection to conduct the study of seismic microzonation of the territories affected by the earthquake of August 24, 2016. As part of the activities of microzonation, IGAG CNR has created WebEQ, a management tool of the data that have been acquired by all participants (i.e., more than twenty research institutes and university departments). The data collection was organized and divided into sub-areas, assigned to working groups with multidisciplinary expertise in geology, geophysics and engineering. WebEQ is a web-GIS System that helps all the subjects involved in the data collection activities, through tools aimed at data uploading and validation, and with a simple GIS interface to display, query and download geographic data. WebEQ is contributing to the creation of a large database containing geographical data, both vector and raster, from various sources and types: - Regional Technical Map em Geological and geomorphological maps em Data location maps em Maps of microzones homogeneous in seismic perspective and seismic microzonation maps em National strong motion network location. Data loading is done through simple input masks that ensure consistency with the database structure, avoiding possible errors and helping users to interact with the map through user-friendly tools. All the data are thematized through standardized symbologies and colors (Gruppo di lavoro MS 2008), in order to allow the easy interpretation by all users. The data download tools allow data exchange between working groups and the scientific community to benefit from the activities. The seismic microzonation activities are still ongoing. WebEQ is enabling easy management of large amounts of data and will form a basis for the development of tools for the management of the upcoming seismic emergencies.

Use of GIS in the estimation and development of risk reduction technology

International Nuclear Information System (INIS)

Ha, Jae Joo

1998-03-01

The occurrence probability of a severe accident in the nuclear power plant is very small because the safety of a plant and the public is considered in the design and operation of a nuclear power plant. However, if a severe accident occurs, the establishment of a reduction strategy of damages resulting from it is essential because the effect of it on the human and the environment is very large. The important criterion which determines the severity of an accident is risk, which is defined as the product of its frequently and the consequence. The establishment of countermeasures in order to estimate and reduce risks quantitatively can be a very powerful tool to minimize the effect of an accident on the human and the environment. The research on the establishment of a framework which integrates a geographic information system (GIS), a database management system (DBMS), and decision making support system (DMSS) is considered very actively. Based on these systems, we can accomplish the estimation and display of risks and the development of reduction methodologies which are essential parts of an accident management of a nuclear power plant. The GIS plays a role to support users to systematize and comprehend spatial relationships of information which are necessary for the decision making. Through the DBMS, we can establish and manage spatial and attribute data, and use them in the query and selection. The DMSS is a computer-based information system which makes a necessary decision easily. In this study, we reviewed the fundamental concepts of a GIS and examined the methodology for the use of it in the estimation and display of risks. Also, we established the fundamental GIS platform of a Yonggwang site and the necessary database systems for the estimation of risks. (author). 17 refs., 9 tabs., 34 figs

The GIS and data solution for advanced business analysis

OpenAIRE

RADUT Carmen

2009-01-01

The GIS Business Analyst is a suite of Geographic Information System (GIS)-enabled tools, wizards, and data that provides business professionals with a complete solution for site evaluation, selective customer profiling, and trade area market analysis. Running simple reports, mapping the results, and performing complex probability models are among the capabilities The GIS Business Analyst offers in one affordable desktop analysis solution. Data and analyses produced by The GIS Business Analys...

Safe-air view: a decision support system for nuclear emergencies

International Nuclear Information System (INIS)

Triacchini, G.; D'Alberti, F.; Canepa, E.

2004-01-01

It was therefore necessary to implement a PC based software for the prediction of the radiological impact on the environment and on the population around the JRC Ispra site caused by any accident occurring at any nuclear facilities within the site. For this reason the SSRP unit has developed with other partners a specific decision PC based support tool, whose characteristics are described in this paper. The developed SW is the first implementation of GIS technology applied to an existing MS-DOS trademark model validated model for wind field definition, calculation of atmospheric dispersion and concentration of pollutants at receptors. The software has been designed as to be able to superimpose, for each point in an area of 50 km radius from the JRC Ispra, layers of information coming from customisable databases. The result is a user-friendly Windows trademark based software, able to quickly calculate and display values of ground and air radioactive contamination around JRC Ispra, following an accidental release of radioactive substances from within a JRC Ispra nuclear installation. (orig.)

A positioning system for forest diseases and pests based on GIS and PTZ camera

International Nuclear Information System (INIS)

Wang, Z B; Zhao, F F; Wang, C B; Wang, L L

2014-01-01

Forest diseases and pests cause enormous economic losses and ecological damage every year in China. To prevent and control forest diseases and pests, the key is to get accurate information timely. In order to improve monitoring coverage rate and economize on manpower, a cooperative investigation model for forest diseases and pests is put forward. It is composed of video positioning system and manual labor reconnaissance with mobile GIS embedded in PDA. Video system is used to scan the disaster area, and is particularly effective on where trees are withered. Forest diseases prevention and control workers can check disaster area with PDA system. To support this investigation model, we developed a positioning algorithm and a positioning system. The positioning algorithm is based on DEM and PTZ camera. Moreover, the algorithm accuracy is validated. The software consists of 3D GIS subsystem, 2D GIS subsystem, video control subsystem and disaster positioning subsystem. 3D GIS subsystem makes positioning visual, and practically easy to operate. 2D GIS subsystem can output disaster thematic map. Video control subsystem can change Pan/Tilt/Zoom of a digital camera remotely, to focus on the suspected area. Disaster positioning subsystem implements the positioning algorithm. It is proved that the positioning system can observe forest diseases and pests in practical application for forest departments

SOFTWARE ARCHITECTURE DESIGN OF GIS WEB SERVICE AGGREGATION BASED ON SERVICE GROUP

Directory of Open Access Journals (Sweden)

J.-C. Liu

2012-08-01

Full Text Available Based on the analysis of research status of domestic and international GIS web service aggregation and development tendency of public platform of GIS web service, the paper designed software architecture of GIS web service aggregation based on GIS web service group. Firstly, using heterogeneous GIS services model, the software architecture converted a variety of heterogeneous services to a unified interface of GIS services, and divided different types of GIS services into different service groups referring to description of GIS services. Secondly, a service aggregation process model was designed. This model completed the task of specific service aggregation instance, by automatically selecting member GIS Web services in the same service group. Dynamic capabilities and automatic adaptation of GIS Web services aggregation process were achieved. Thirdly, this paper designed a service evaluation model of GIS web service aggregation based on service group from three aspects, i.e. GIS Web Service itself, networking conditions and service consumer. This model implemented effective quality evaluation and performance monitoring of GIS web service aggregation. It could be used to guide the execution, monitor and service selection of aggregation process. Therefore, robustness of aggregated GIS web service was improved. Finally, the software architecture has been widely used in public platform of GIS web service and a number of geo-spatial framework constructions for digital city in Sichuan Province, and aggregated various GIS web services such as World Map(National Public Platform of Geo-spatial Service, ArcGIS, SuperMap, MapGIS, NewMap etc. Applications of items showed that this software architecture was practicability.

Integrating GIS and GPS in environmental remediation oversight

International Nuclear Information System (INIS)

Kaletsky, K.; Earle, J.R.; Schneider, T.A.

1996-01-01

This paper presents findings on Ohio EPA Office of Federal Facilities Oversight's (OFFO) use of GIS and GPS for environmental remediation oversight at the U.S. Department of Energy's (DOE) Fernald Site. The Fernald site is a former uranium metal production facility within DOE's nuclear weapons complex. Significant uranium contamination of soil and groundwater is being remediated under state and federal regulations. OFFO uses GIS/GPS to enhance environmental monitoring and remediation oversight. These technologies are utilized within OFFO's environmental monitoring program for sample location and parameter selection, data interpretation and presentation. GPS is used to integrate sample data into OFFO's GIS and for permanently linking precise and accurate geographic data to samples and waste units. It is important to identify contamination geographically as all visual references (e.g., buildings, infrastructure) will be removed during remediation. Availability of the GIS allows OFFO to perform independent analysis and review of DOE contractor generated data, models, maps, and designs. This ability helps alleviate concerns associated with open-quotes black boxclose quotes models and data interpretation. OFFO's independent analysis has increased regulatory confidence and the efficiency of design reviews. GIS/GPS technology allows OFFO to record and present complex data in a visual format aiding in stakeholder education and awareness. Presented are OFFO's achievements within the aforementioned activities and some reasons learned in implementing the GIS/GPS program. OFFO's two years of GIS/GPS development have resulted in numerous lessons learned and ideas for increasing effectiveness through the use of GIS/GPS

A Framework for Sharing and Integrating Remote Sensing and GIS Models Based on Web Service

Science.gov (United States)

Chen, Zeqiang; Lin, Hui; Chen, Min; Liu, Deer; Bao, Ying; Ding, Yulin

2014-01-01

Sharing and integrating Remote Sensing (RS) and Geographic Information System/Science (GIS) models are critical for developing practical application systems. Facilitating model sharing and model integration is a problem for model publishers and model users, respectively. To address this problem, a framework based on a Web service for sharing and integrating RS and GIS models is proposed in this paper. The fundamental idea of the framework is to publish heterogeneous RS and GIS models into standard Web services for sharing and interoperation and then to integrate the RS and GIS models using Web services. For the former, a “black box” and a visual method are employed to facilitate the publishing of the models as Web services. For the latter, model integration based on the geospatial workflow and semantic supported marching method is introduced. Under this framework, model sharing and integration is applied for developing the Pearl River Delta water environment monitoring system. The results show that the framework can facilitate model sharing and model integration for model publishers and model users. PMID:24901016

A framework for sharing and integrating remote sensing and GIS models based on Web service.

Science.gov (United States)

Chen, Zeqiang; Lin, Hui; Chen, Min; Liu, Deer; Bao, Ying; Ding, Yulin

2014-01-01

Sharing and integrating Remote Sensing (RS) and Geographic Information System/Science (GIS) models are critical for developing practical application systems. Facilitating model sharing and model integration is a problem for model publishers and model users, respectively. To address this problem, a framework based on a Web service for sharing and integrating RS and GIS models is proposed in this paper. The fundamental idea of the framework is to publish heterogeneous RS and GIS models into standard Web services for sharing and interoperation and then to integrate the RS and GIS models using Web services. For the former, a "black box" and a visual method are employed to facilitate the publishing of the models as Web services. For the latter, model integration based on the geospatial workflow and semantic supported marching method is introduced. Under this framework, model sharing and integration is applied for developing the Pearl River Delta water environment monitoring system. The results show that the framework can facilitate model sharing and model integration for model publishers and model users.

Development of a GIS-Based Decision Support System for Diagnosis of River System Health and Restoration

Directory of Open Access Journals (Sweden)

Jihong Xia

2014-10-01

Full Text Available The development of a decision support system (DSS to inform policy making has been progressing rapidly. This paper presents a generic framework and the development steps of a decision tool prototype of geographic information systems (GIS-based decision support system of river health diagnosis (RHD-DSS. This system integrates data, calculation models, and human knowledge of river health status assessment, causal factors diagnosis, and restoration decision making to assist decision makers during river restoration and management in Zhejiang Province, China. Our RHD-DSS is composed of four main elements: the graphical user interface (GUI, the database, the model base, and the knowledge base. It has five functional components: the input module, the database management, the diagnostic indicators management, the assessment and diagnosis, and the visual result module. The system design is illustrated with particular emphasis on the development of the database, model schemas, diagnosis and analytical processing techniques, and map management design. Finally, the application of the prototype RHD-DSS is presented and implemented for Xinjiangtang River of Haining County in Zhejiang Province, China. This case study is used to demonstrate the advantages gained by the application of this system. We conclude that there is great potential for using the RHD-DSS to systematically manage river basins in order to effectively mitigate environmental issues. The proposed approach will provide river managers and designers with improved insight into river degradation conditions, thereby strengthening the assessment process and the administration of human activities in river management.

When GIS zooms in: spatio-genetic maps of multipaternity in Armadillidium vulgare.

Science.gov (United States)

Bech, Nicolas; Depeux, Charlotte; Durand, Sylvine; Debenest, Catherine; Lafitte, Alexandra; Beltran-Bech, Sophie

2017-12-01

Geographic information system (GIS) tools are designed to illustrate, analyse and integrate geographic or spatial data, usually on a macroscopic scale. By contrast, genetic tools focus on a microscopic scale. Because in reality, landscapes have no predefined scale, our original study aims to develop a new approach, combining both cartographic and genetic approaches to explore microscopic landscapes. For this, we focused on Armadillidium vulgare, a terrestrial isopod model in which evolutionary pressures imposed by terrestrial life have led to the development of internal fertilisation and, consequently, to associated physiological changes. Among these, the emergence of internal receptacles, found in many taxa ranging from mammals to arthropods, allowed females to store sperm from several partners, enabling multipaternity. Among arthropods, terrestrial isopods like the polygynandrous A. vulgare present a female structure, the marsupium, in which fertilised eggs migrate and develop into mancae (larval stage). To test our innovative combined approach, we proposed different males to four independent females, and at the end of incubation in the marsupium, we mapped (using GIS methods) and genotyped (using 12 microsatellite markers) all the incubated mancae. This methodology permitted to obtain spatio-genetic maps describing heterozygosity and spatial distribution of mancae and of multipaternity within the marsupial landscape. We discussed the interest of this kind of multidisciplinary approach which could improve in this case our understanding of sexual selection mechanisms in this terrestrial crustacean. Beyond the interesting model-focused insights, the main challenge of this study was the transfer of GIS techniques to a microscopic scale and our results appear so as pioneers rendering GIS tools available for studies involving imagery whatever their study scale.

An Investigation into the Possibilities of BIM and GIS Cooperation and Utilization of GIS in the BIM Process

Directory of Open Access Journals (Sweden)

Pavel Tobiáš

2015-06-01

Full Text Available In the coming years we will most probably watch a significant increase of the BIM (building information model utilization in the AEC (Architecture/Engineering/Construction sector even in the Czech Republic. Therefore, it would be reasonable to consider possible utilization of the well-established geographic information systems within the building information modelling process. This paper is based on the currently existing literature and is focused on the interrelationship between BIM and GIS. The main goal is to reveal potential fields of cooperation and to find possible utilization of GIS in BIM. To provide a theoretical framework, this article briefly introduces and defines the term of BIM and deals with the most important semantic models in AEC and 3D GIS IFC and CityGML. The paper also contains examples of specific efforts recently dealing with the BIM and GIS collaboration.

The application of GIS equipment in nuclear power plant

International Nuclear Information System (INIS)

Ji Lin; Huang Pengbo; Chang Xin'ai

2012-01-01

In this paper, the advantage and disadvantage of gas insulated switchgear (GIS) in environmental adaptability, operation safety and economic benefit are analyzed. Issues concerning the manufacture, transportation, on-site installation, operation, maintenance and extension of GIS equipment are discussed. Comparing those characteristics with air insulated switchgear (AIS), GIS is characterized by better aseismic ability, less occupied area and installation process, lower fault rate, longer maintenance period, easier for extension and higher economic benefit, SF6 gas insures the operation safety and reliability of GIS equipment, modular transport and re-assembling improves the installation flexibility. Therefore, GIS equipment may be the first choice for the primary equipment of nuclear power plant. (authors)

Mobile emergency, an emergency support system for hospitals in mobile devices: pilot study.

Science.gov (United States)

Bellini, Pierfrancesco; Boncinelli, Sergio; Grossi, Francesco; Mangini, Marco; Nesi, Paolo; Sequi, Leonardo

2013-05-23

Hospitals are vulnerable to natural disasters, man-made disasters, and mass causalities events. Within a short time, hospitals must provide care to large numbers of casualties in any damaged infrastructure, despite great personnel risk, inadequate communications, and limited resources. Communications are one of the most common challenges and drawbacks during in-hospital emergencies. Emergency difficulties in communicating with personnel and other agencies are mentioned in literature. At the moment of emergency inception and in the earliest emergency phases, the data regarding the true nature of the incidents are often inaccurate. The real needs and conditions are not yet clear, hospital personnel are neither efficiently coordinated nor informed on the real available resources. Information and communication technology solutions in health care turned out to have a great positive impact both on daily working practice and situations. The objective of this paper was to find a solution that addresses the aspects of communicating among medical personnel, formalizing the modalities and protocols and the information to guide the medical personnel during emergency conditions with a support of a Central Station (command center) to cope with emergency management and best practice network to produce and distribute intelligent content made available in the mobile devices of the medical personnel. The aim was to reduce the time needed to react and to cope with emergency organization, while facilitating communications. The solution has been realized by formalizing the scenarios, extracting, and identifying the requirements by using formal methods based on unified modeling language (UML). The system and was developed using mobile programming under iOS Apple and PHP: Hypertext Preprocessor My Structured Query Language (PHP MySQL). Formal questionnaires and time sheets were used for testing and validation, and a control group was used in order to estimate the reduction of time needed

Information Systems Coordinate Emergency Management

Science.gov (United States)

2012-01-01

-changing planet. This information can be captured, analyzed, and visualized by geographic information systems (GIS) to produce maps, charts, and other tools that can reveal information essential to a wide variety of applications including emergency management. Knowing precise, real-time information about the size, location, environmental conditions, and resulting damage of an event like a flood or wildfire as well as the location and numbers of emergency responders and other resources contributes directly to the effectiveness of disaster mitigation. The need for such information is also evident when responding to homeland security threats, such as a terrorist attack. Recognizing the value of its geospatial information resources for this and other purposes, in 1998 Stennis and the state of Mississippi partnered to form what became the Enterprise for Innovative Geospatial Solutions (EIGS) industry cluster, supporting the growth of remote sensing and GIS-based research and business. As part of EIGS, several companies partnered with NASA through dual use and Small Business Innovation Research (SBIR) contracts. Among those was NVision.

A Modular GIS-Based Software Architecture for Model Parameter Estimation using the Method of Anchored Distributions (MAD)

Science.gov (United States)

Ames, D. P.; Osorio-Murillo, C.; Over, M. W.; Rubin, Y.

2012-12-01

The Method of Anchored Distributions (MAD) is an inverse modeling technique that is well-suited for estimation of spatially varying parameter fields using limited observations and Bayesian methods. This presentation will discuss the design, development, and testing of a free software implementation of the MAD technique using the open source DotSpatial geographic information system (GIS) framework, R statistical software, and the MODFLOW groundwater model. This new tool, dubbed MAD-GIS, is built using a modular architecture that supports the integration of external analytical tools and models for key computational processes including a forward model (e.g. MODFLOW, HYDRUS) and geostatistical analysis (e.g. R, GSLIB). The GIS-based graphical user interface provides a relatively simple way for new users of the technique to prepare the spatial domain, to identify observation and anchor points, to perform the MAD analysis using a selected forward model, and to view results. MAD-GIS uses the Managed Extensibility Framework (MEF) provided by the Microsoft .NET programming platform to support integration of different modeling and analytical tools at run-time through a custom "driver." Each driver establishes a connection with external programs through a programming interface, which provides the elements for communicating with core MAD software. This presentation gives an example of adapting the MODFLOW to serve as the external forward model in MAD-GIS for inferring the distribution functions of key MODFLOW parameters. Additional drivers for other models are being developed and it is expected that the open source nature of the project will engender the development of additional model drivers by 3rd party scientists.

COSMO-SkyMed and GIS applications

Science.gov (United States)

Milillo, Pietro; Sole, Aurelia; Serio, Carmine

2013-04-01

Geographic Information Systems (GIS) and Remote Sensing have become key technology tools for the collection, storage and analysis of spatially referenced data. Industries that utilise these spatial technologies include agriculture, forestry, mining, market research as well as the environmental analysis . Synthetic Aperture Radar (SAR) is a coherent active sensor operating in the microwave band which exploits relative motion between antenna and target in order to obtain a finer spatial resolution in the flight direction exploiting the Doppler effect. SAR have wide applications in Remote Sensing such as cartography, surface deformation detection, forest cover mapping, urban planning, disasters monitoring , surveillance etc… The utilization of satellite remote sensing and GIS technology for this applications has proven to be a powerful and effective tool for environmental monitoring. Remote sensing techniques are often less costly and time-consuming for large geographic areas compared to conventional methods, moreover GIS technology provides a flexible environment for, analyzing and displaying digital data from various sources necessary for classification, change detection and database development. The aim of this work si to illustrate the potential of COSMO-SkyMed data and SAR applications in a GIS environment, in particular a demostration of the operational use of COSMO-SkyMed SAR data and GIS in real cases will be provided for what concern DEM validation, river basin estimation, flood mapping and landslide monitoring.

Technology integrated teaching in Malaysian schools: GIS, a SWOT analysis

Directory of Open Access Journals (Sweden)

Habibah Lateh, vasugiammai muniandy

2011-08-01

Full Text Available Geographical Information System (GIS has been introduced and widely used in schools in various countries. The year 1990 onwards, the implementation of GIS in schools showed an increase. This is due to the drastic changes and reforms in the education system. Even though the name GIS suits well to the Geography subject, but it is widely integrated in various subjects such as History, Chemistry, Physics and Science. In Malaysia, GIS is common in fields such as risk management, architecture, town planning and municipal department. Anyhow, it is still unknown in the school education system. Even upper secondary students are not familiar with GIS. The Ministry of Education in Malaysia has been continuously reforming the education towards the aim of creating a society based on economic fundamentals and knowledge. The Master Plan for Educational Development with the aim of developing individual potential with well-integrated and balanced education is already on field. Recently, Malaysia invested 18 % of the annual national budget towards upgrading its education system. The computer in education program started in 1999. Three hundred and twenty two schools were chosen as ‘break a way’ from conventional teaching method towards technology integrated teaching. Projects such as New Primary School Curriculum (KBSR, Integrated Secondary School Curriculum (KBSM, Smart School Project, School Access Centre were introduced constantly. Teacher as the cogwheel of innovations in schools were given courses in aim to develop their ICT knowledge and skill. To this date, the technology integration in subjects is not equal and it disperses through subjects. Geography is one of the ‘dry’ subjects in schools with less technology which is not preferable among students. Geographical Information System (GIS is foremost the best Geographical Information Technology (GIT to be implied in geography subject. In Malaysian Education System, GIS is still exposed just in papers

WATERSHED BASED WEB GIS: CASE STUDY OF PALOPO WATERSHED AREA SOUTH SULAWESI, INDONESIA

Directory of Open Access Journals (Sweden)

Jalaluddin Rumi PRASAD

2017-09-01

Full Text Available Data and land resource information complete, accurate, and current is an input in management planning, evaluation, and monitoring Watershed. Implementation of this research is conducted with optimum utilization of secondary data that is supported by direct field measurement data, digitalizing the maps associated, Geographic Information Systems modeling, and model calibration. This research has resulted in a Geographic Information System Management of potential Watershed GIS Web-based or abbreviated WEB GIS MPPDAS using Palopo watershed area, South Sulawesi as a case study sites for the development of a prototype that consists of three applications the main website ie Web Portal, Web GIS, and Web Tutorial. The system is built to show online (and offline maps watershed in the administrative area of Palopo along with the location of its potential accumulated in the four (4 groups of layers, including groups of main layer (2 layer, a group of base layer (14 layers, groups of thematic layers (12 layers, a group of policy layer (8 layer. In addition to display a map, use the WEB application of GIS MPPDAS can also use tools or controls in the application to perform analyzes in its monitoring and evaluation, including: Geocoding, Add layer, Digitizing, Selection, Measurements, Graph, Filtering, Geolocation, Overlay cartographic, and etc.

Applications and issues of GIS as tool for civil engineering modeling

Science.gov (United States)

Miles, S.B.; Ho, C.L.

1999-01-01

A tool that has proliferated within civil engineering in recent years is geographic information systems (GIS). The goal of a tool is to supplement ability and knowledge that already exists, not to serve as a replacement for that which is lacking. To secure the benefits and avoid misuse of a burgeoning tool, engineers must understand the limitations, alternatives, and context of the tool. The common benefits of using GIS as a supplement to engineering modeling are summarized. Several brief case studies of GIS modeling applications are taken from popular civil engineering literature to demonstrate the wide use and varied implementation of GIS across the discipline. Drawing from the case studies, limitations regarding traditional GIS data models find the implementation of civil engineering models within current GIS are identified and countered by discussing the direction of the next generation of GIS. The paper concludes by highlighting the potential for the misuse of GIS in the context of engineering modeling and suggests that this potential can be reduced through education and awareness. The goal of this paper is to promote awareness of the issues related to GIS-based modeling and to assist in the formulation of questions regarding the application of current GIS. The technology has experienced much publicity of late, with many engineers being perhaps too excited about the usefulness of current GIS. An undoubtedly beneficial side effect of this, however, is that engineers are becoming more aware of GIS and, hopefully, the associated subtleties. Civil engineers must stay informed of GIS issues and progress, but more importantly, civil engineers must inform the GIS community to direct the technology development optimally.

Study Of Safety Management By Using Gis In Coimbatore

Directory of Open Access Journals (Sweden)

S. Kanchana

2015-08-01

Full Text Available The safety management is very important in the process of construction .The traditional methods of construction safety control cannot meet the construction of big project. To ensure the safety of construction and reduce accidents in the process of construction the current situation and problems we face in construction safety management should be studied first. And then the project risk warning mechanism based on the GIS is constructed according to the problems we faced to achieve visual monitoring and warning of construction safety risk management and to provide decision support for construction. This project aims to develop a web-based spatial decision support system model for proactive health and safety management in linear construction projects. 5 Currently health and safety management is usually performed reactively instead of proactive management since hazard identification and risk assessment is mostly performed on paper based documents that are not effectively used at site. An information system relates to a chain of operations lead to planning the observation and collection of data to storage and analysis of data to the use of derived information in decision-making processes. To create a web-based free and open sourced GIS that can work with different data formats by exchanging and presenting data as a real-time map on web.

Managing Data and ArcGIS

OpenAIRE

Farr, Lucy

2011-01-01

Glenn Jobson (CRASSH) produced and edited this video in collaboration with the Incremental project. ESRI's ArcGIS data, and other vector data system, are highly vulnerable to partial or complete data loss over time because as the company makes frequent software updates, and the data themselves have so many moving parts. In this presentation, Lucy Farr (McDonald Institute for Archaeological Research) describes her experiences using ArcGIS, lessons learnt, and recommendations for best practi...

Open Source GIS Connectors to NASA GES DISC Satellite Data

Science.gov (United States)

Kempler, Steve; Pham, Long; Yang, Wenli

2014-01-01

The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) houses a suite of high spatiotemporal resolution GIS data including satellite-derived and modeled precipitation, air quality, and land surface parameter data. The data are valuable to various GIS research and applications at regional, continental, and global scales. On the other hand, many GIS users, especially those from the ArcGIS community, have difficulties in obtaining, importing, and using our data due to factors such as the variety of data products, the complexity of satellite remote sensing data, and the data encoding formats. We introduce a simple open source ArcGIS data connector that significantly simplifies the access and use of GES DISC data in ArcGIS.

Map-IT! A Web-Based GIS Tool for Watershed Science Education.

Science.gov (United States)

Curtis, David H.; Hewes, Christopher M.; Lossau, Matthew J.

This paper describes the development of a prototypic, Web-accessible GIS solution for K-12 science education and citizen-based watershed monitoring. The server side consists of ArcView IMS running on an NT workstation. The client is built around MapCafe. The client interface, which runs through a standard Web browser, supports standard MapCafe…

Towards automated statewide land cover mapping in Wisconsin using satellite remote sensing and GIS techniques

International Nuclear Information System (INIS)

Cosentino, B.L.; Lillesand, T.M.

1991-01-01

Attention is given to an initial research project being performed by the University of Wisconsin-Madison, Environmental Remote Sensing Center in conjunction with seven local, state, and federal agencies to implement automated statewide land cover mapping using satellite remote sensing and geographical information system (GIS) techniques. The basis, progress, and future research needs for this mapping program are presented. The research efforts are directed toward strategies that integrate satellite remote sensing and GIS techniques in the generation of land cover data for multiple users of land cover information. The project objectives are to investigate methodologies that integrate satellite data with other imagery and spatial data resident in emerging GISs in the state for particular program needs, and to develop techniques that can improve automated land cover mapping efficiency and accuracy. 10 refs

GIS-BASED PREDICTION OF HURRICANE FLOOD INUNDATION

Energy Technology Data Exchange (ETDEWEB)

JUDI, DAVID [Los Alamos National Laboratory; KALYANAPU, ALFRED [Los Alamos National Laboratory; MCPHERSON, TIMOTHY [Los Alamos National Laboratory; BERSCHEID, ALAN [Los Alamos National Laboratory

2007-01-17

A simulation environment is being developed for the prediction and analysis of the inundation consequences for infrastructure systems from extreme flood events. This decision support architecture includes a GIS-based environment for model input development, simulation integration tools for meteorological, hydrologic, and infrastructure system models and damage assessment tools for infrastructure systems. The GIS-based environment processes digital elevation models (30-m from the USGS), land use/cover (30-m NLCD), stream networks from the National Hydrography Dataset (NHD) and soils data from the NRCS (STATSGO) to create stream network, subbasins, and cross-section shapefiles for drainage basins selected for analysis. Rainfall predictions are made by a numerical weather model and ingested in gridded format into the simulation environment. Runoff hydrographs are estimated using Green-Ampt infiltration excess runoff prediction and a 1D diffusive wave overland flow routing approach. The hydrographs are fed into the stream network and integrated in a dynamic wave routing module using the EPA's Storm Water Management Model (SWMM) to predict flood depth. The flood depths are then transformed into inundation maps and exported for damage assessment. Hydrologic/hydraulic results are presented for Tropical Storm Allison.

Web-Gis Solutions Development for Citizens and Water Companies

Science.gov (United States)

Şercăianu, M.

2013-05-01

This paper describes the development of a web-GIS solution in which urban residents, from Buzau City, could be involved in decision-support process of water companies, in order to reduce water losses, by collecting information directly from citizens. In recent years, reducing material and economic losses, recorded in the entire municipal networks management process has become the main focus of public companies in Romania. Due to problems complexity that arise in collecting information from citizens and issues identified in urban areas, more analyzes were required related to web-GIS solutions used in areas such as local government, public utilities, environmental protection or financial management. Another important problem is the poor infrastructure development of spatial databases founded in public companies, and connection to web platforms. Developing the entire communication process between residents and municipal companies has required the use of concept "citizen-sensor" in the entire reporting process. Reported problems are related to water distribution networks with the possibility of covering the entire public utilities infrastructure.

Using geospatial techniques to develop an emergency referral transport system for suspected sepsis patients in Bangladesh

Science.gov (United States)

Haider, Rafiqul; Abdullah, Abu Yousuf Md; Christou, Aliki; Ali, Nabeel Ashraf; Rahman, Ahmed Ehsnaur; Iqbal, Afrin; Bari, Sanwarul; Hoque, D. M. Emdadul; Arifeen, Shams El; Kissoon, Niranjan; Larson, Charles P.

2018-01-01

Background A geographic information system (GIS)-based transport network within an emergency referral system can be the key to reducing health system delays and increasing the chances of survival, especially during an emergency. We employed a GIS to design an emergency transport system for the rapid transfer of pregnant or early post-partum women, newborns, and children under 5 years of age with suspected sepsis under the Interrupting Pathways to Sepsis Initiative (IPSI) project. Methods A GIS database was developed by mapping the villages, roads, and relevant physical features of the study area. A travel-time algorithm was developed to incorporate the time taken by different modes of local transport to reach the health complexes. These were used in a network analysis to identify the shortest routes to the hospitals from the villages, which were categorized into green, yellow, and red zones based on their proximity to the nearest hospitals to provide transport facilities. An emergency call-in centre established for the project managed the transport system, and its data was used to assess the uptake of this transport system amongst distant communities. Results Fifteen pre-existing and two new routes were identified as the shortest routes to the health complexes. The call-in centre personnel used this route information to direct both patients and transport drivers to the nearest transport hubs or pick-up points. Adherence with referral advice was high in areas where the IPSI transport operated. Over the study period, the utilisation of the project’s transport doubled and referral compliance from distant zones similarly increased. Conclusions The GIS system created for this study facilitated rapid referral of patients in emergency from distant zones, using locally available transport and resources. The methodology described in this study to develop and implement an emergency transport system can be applied in similar, rural, low-income country settings. PMID

The social problems and strategies of the government GIS in China

Science.gov (United States)

Chen, Nan; Fu, Zhongliang

2007-06-01

GIS has wider and wider applications. The application in the field of administrative management and assistant decision-making have formed a specific research area--the government GIS. As an information industry with great sociality, GIS and its development are influenced by many technical factors and social factors. As for the government GIS in China, the social factors often play a more important role in it. A description of the current development status of the government GIS, both in China and abroad, was made in this paper. After the description, researchers pointed out the deficiency of Chinese government GIS. On the basis of this, the rational suggestion of government GIS in China were put forward at last.

Development of supporting system for emergency response to maritime transport accidents involving radioactive material

International Nuclear Information System (INIS)

Odano, N.; Matsuoka, T.; Suzuki, H.

2004-01-01

National Maritime Research Institute has developed a supporting system for emergency response of competent authority to maritime transport accidents involving radioactive material. The supporting system for emergency response has functions of radiation shielding calculation, marine diffusion simulation, air diffusion simulation and radiological impact evaluation to grasp potential hazard of radiation. Loss of shielding performance accident and loss of sealing ability accident were postulated and impact of the accidents was evaluated based on the postulated accident scenario. Procedures for responding to emergency were examined by the present simulation results

GIS and Cartography: An Introduction Overview

International Nuclear Information System (INIS)

Dominguez, J.

2000-01-01

This Technical Report concerns to some relevant concepts in Cartography and GIS. We will define terms and functions as scale, projection, cartographic syntaxes. We'll specify some Geographic Information, formats, sources... Finally, we will study about GIS applications and, specially, how CIEMAT is working with that, and what is the future of this technology. (Author) 71 refs

GIS in oceanography: Status, hurdles and prospects

Digital Repository Service at National Institute of Oceanography (India)

Kunte, P.D.

stream_size 5 stream_content_type text/plain stream_name Remote_Sens_GIS_Environ_Plan_1995_575.pdf.txt stream_source_info Remote_Sens_GIS_Environ_Plan_1995_575.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset...

Remote supervision of GIS monitoring system

Energy Technology Data Exchange (ETDEWEB)

Pannunzio, J.; Juge, P.; Ficheux, A.; Rayon, J.L. [Areva T and D Automation Canada Inc., Monteal, PQ (Canada)

2007-07-01

Operators of gas-insulated substations (GIS) are increasingly concerned with failure prevention, scheduled maintenance, personnel safety and shortage of maintenance crews. Until recently, the density levels of the insulating gas sulfur hexafluoride (SF6) was the only parameter controlled in gas-insulated substations. Modern digital type control and monitoring equipment have been widely used in the past decade. Remote indication of gas density and status of dynamic components was made possible and shown on local control panels. Modern GIS monitoring systems offer features such as SF6 monitoring, SF6 leakage trends, internal arc localization and detection. The required information is recorded in a local computer and displaced onto a local human machine interface (HMI) or a local industrial PC mounted next to the GIS. These monitoring systems are used as decision making tools to facilitate maintenance activities and optimize the management of assets. This paper presented the latest developments in digital monitoring systems in terms of modern digital architecture; management of information flows between monitoring systems and control systems; operation of remote supervision; configuration of high voltage substations and information sharing; and, types of links between GIS room and remote supervision. This paper also demonstrated what can be achieved by moving the central HMI of a GIS monitoring system to the decision-making centres. It was shown that integrated features that allow remote on-line or automated management have reached an acceptable level of reliability and comfort for operators. 5 figs.

Lowering the barriers to computational modeling of Earth's surface: coupling Jupyter Notebooks with Landlab, HydroShare, and CyberGIS for research and education.

Science.gov (United States)

Bandaragoda, C.; Castronova, A. M.; Phuong, J.; Istanbulluoglu, E.; Strauch, R. L.; Nudurupati, S. S.; Tarboton, D. G.; Wang, S. W.; Yin, D.; Barnhart, K. R.; Tucker, G. E.; Hutton, E.; Hobley, D. E. J.; Gasparini, N. M.; Adams, J. M.

2017-12-01

The ability to test hypotheses about hydrology, geomorphology and atmospheric processes is invaluable to research in the era of big data. Although community resources are available, there remain significant educational, logistical and time investment barriers to their use. Knowledge infrastructure is an emerging intellectual framework to understand how people are creating, sharing and distributing knowledge - which has been dramatically transformed by Internet technologies. In addition to the technical and social components in a cyberinfrastructure system, knowledge infrastructure considers educational, institutional, and open source governance components required to advance knowledge. We are designing an infrastructure environment that lowers common barriers to reproducing modeling experiments for earth surface investigation. Landlab is an open-source modeling toolkit for building, coupling, and exploring two-dimensional numerical models. HydroShare is an online collaborative environment for sharing hydrologic data and models. CyberGIS-Jupyter is an innovative cyberGIS framework for achieving data-intensive, reproducible, and scalable geospatial analytics using the Jupyter Notebook based on ROGER - the first cyberGIS supercomputer, so that models that can be elastically reproduced through cloud computing approaches. Our team of geomorphologists, hydrologists, and computer geoscientists has created a new infrastructure environment that combines these three pieces of software to enable knowledge discovery. Through this novel integration, any user can interactively execute and explore their shared data and model resources. Landlab on HydroShare with CyberGIS-Jupyter supports the modeling continuum from fully developed modelling applications, prototyping new science tools, hands on research demonstrations for training workshops, and classroom applications. Computational geospatial models based on big data and high performance computing can now be more efficiently

Development of a Online Nuclear Emergency Response System (ONERS) for Kalpakkam site - the design aspects

Energy Technology Data Exchange (ETDEWEB)

Raja Shekhar, S. S.; Bhatawadekar, Shantanu; Krishna Murthy, Y. V.N., [Regional Remote Sensing Service Centre, Department of Space, Nagpur (India); Srinivas, C. V.; Venkatesan, [Radiological Safety Division, Radiological Safety and Environmental Group, Indira Gandhi Centre for Atomic Research, Kalapakkam (India)

2012-07-01

An Online Nuclear Emergency Response System (ONERS) is developed for the nuclear power plant site at Kalpakkam as part of the Department of Atomic Energy (DAE) initiative. ONERS is a GIS based spatial analysis system designed indigenously to provide decision support in the event of a radioactive leak or accident from any of the nuclear facilities by assessing the dispersion and deposition patterns of the atmospheric releases, integrate with spatial geographical database for impact assessment and guidance for mitigation. The system is designed with open software tools (UMN Map server, MYSQL, PHP, Java scripts) and its main features include assessment of dose, short and long term forecast, counter measure support, impact assessment to minimize potential threat to man and environment during radiological emergencies. The system is implemented in live mode with integration of numerical models and spatial data base for the site region and is presently operational for the Kalpakkam site. (author)

Development of a Online Nuclear Emergency Response System (ONERS) for Kalpakkam site - the design aspects

International Nuclear Information System (INIS)

Raja Shekhar, S.S.; Bhatawadekar, Shantanu; Krishna Murthy, Y.V.N.; Srinivas, C.V.; Venkatesan

2012-01-01

An Online Nuclear Emergency Response System (ONERS) is developed for the nuclear power plant site at Kalpakkam as part of the Department of Atomic Energy (DAE) initiative. ONERS is a GIS based spatial analysis system designed indigenously to provide decision support in the event of a radioactive leak or accident from any of the nuclear facilities by assessing the dispersion and deposition patterns of the atmospheric releases, integrate with spatial geographical database for impact assessment and guidance for mitigation. The system is designed with open software tools (UMN Map server, MYSQL, PHP, Java scripts) and its main features include assessment of dose, short and long term forecast, counter measure support, impact assessment to minimize potential threat to man and environment during radiological emergencies. The system is implemented in live mode with integration of numerical models and spatial data base for the site region and is presently operational for the Kalpakkam site. (author)

A GIS-based generic real-time risk assessment framework and decision tools for chemical spills in the river basin.

Science.gov (United States)

Jiang, Jiping; Wang, Peng; Lung, Wu-seng; Guo, Liang; Li, Mei

2012-08-15

This paper presents a generic framework and decision tools of real-time risk assessment on Emergency Environmental Decision Support System for response to chemical spills in river basin. The generic "4-step-3-model" framework is able to delineate the warning area and the impact on vulnerable receptors considering four types of hazards referring to functional area, societal impact, and human health and ecology system. Decision tools including the stand-alone system and software components were implemented on GIS platform. A detailed case study on the Songhua River nitrobenzene spill illustrated the goodness of the framework and tool Spill first responders and decision makers of catchment management will benefit from the rich, visual and dynamic hazard information output from the software. Copyright © 2012 Elsevier B.V. All rights reserved.

Integration of Tactical Emergency Casualty Care Into the National Tactical Emergency Medical Support Competency Domains.

Science.gov (United States)

Pennardt, Andre; Callaway, David W; Kamin, Rich; Llewellyn, Craig; Shapiro, Geoff; Carmona, Philip A; Schwartz, Richard B

2016-01-01

Tactical emergency medical support (TEMS) is a critical component of the out-of-hospital response to domestic high-threat incidents such as hostage scenarios, warrant service, active shooter or violent incidents, terrorist attacks, and other intentional mass casualty-producing acts. From its grass-roots inception in the form of medical support of select law enforcement special weapons and tactics (SWAT) units in the 1980s, the TEMS subspecialty of prehospital care has rapidly grown and evolved over the past 40 years. The National TEMS Initiative and Council (NTIC) competencies and training objectives are the only published recommendations of their kind and offer the opportunity for national standardization of TEMS training programs and a future accreditation process. Building on the previous work of the NTIC and the creation of acknowledged competency domains for TEMS and the acknowledged civilian translation of TCCC by the Committee for Tactical Emergency Casualty Care (C-TECC), the Joint Review Committee (JRC) has created an opportunity to bring forward the work in a form that could be operationally useful in an all-hazards and whole of community format. 2016.

The effects of geographic information system (GIS) technologies on students' attitudes, self-efficacy, and achievement in middle school science classrooms

Science.gov (United States)

Baker, Thomas Ray

Since the publication of the National Science Education Standards , a concerted and evolving movement to make science classrooms more inquiry-oriented has been building. The proliferation of models of teaching and learning where questions and investigations drive learning, while not new are also not easy to plan, implement, or evaluate. In order to make the vision of the Standards come to fruition, educators are calling on the tools of technology to support and foster the shift to scientific inquiry or classroom research. The use of certain data analysis technologies have been suggested to be a particularly powerful ally in the struggle to extend classroom teaching and learning into the realm of problem-driven classroom inquiry. The use of a Geographic Information System (GIS), a technology allowing for the graphical representation of data with a geographic component seems to be one technology that can adequately bolster the dynamic and complex needs of the science classroom engaged in scientific inquiry. In this study, eighth grade Earth science students studying relative, local air quality indicators were divided in two groups; a treatment group that utilized GIS-supported scientific inquiry and a control group that used traditional mapping techniques to support their study. Student attitudes regarding science and technology were measured with a pre/post instrument across the study. Individual student efforts were summarily evaluated with a modified Kansas Science Performance Based Assessment rubric. During the two-week treatment, the students using the GIS-supported materials were found to show positive and significant improvements in science self-efficacy and attitudes toward technology. While female attitudes and self-efficacy were not found to change, males significantly improved on all affective factors. Students using GIS also performed significantly better than traditional mapping students on science process skills, specifically data analysis techniques

Bogen om GIS og geodata

DEFF Research Database (Denmark)

Balstrøm, Thomas; Jacobi, Ole; Bodum, Lars

OM INDHOLDET: Kort har gennem århundreder været brugt til at afbilde fænomener på vores runde Jord på papir, men i dagens IT-samfund håndteres de i computere ved brug af geografiske informationssystemer - forkortet GIS. I dem er det for eksempel muligt at koble kortinformationer med registeroplys......OM INDHOLDET: Kort har gennem århundreder været brugt til at afbilde fænomener på vores runde Jord på papir, men i dagens IT-samfund håndteres de i computere ved brug af geografiske informationssystemer - forkortet GIS. I dem er det for eksempel muligt at koble kortinformationer med...... kriterier osv. I systemerne findes der også værktøjer til beregning af korteste vej i vejnetværk og analyser på cellebaserede data som eksempelvis digitale højdemodeller. I denne første dansksprogede lærebog gives der en introduktion til de basale begreber i forståelsen af GIS eksemplificeret ved fokus på...... geodata i databaser, analysemetoder, kartografiske principper, metadata (data om data) og udvalgte eksempler på geodata til brug for den offentlige forvaltning, private virksomheder og borgere. Bogen afrundes med en perspektivering om mulighederne i fremtidens brug af GIS og geodata, som desværre ikke har...

Monitoring grasshopper and locust habitats in Sahelian Africa using GIS and remote sensing technology

Science.gov (United States)

Tappan, G. Gray; Moore, Donald G.; Knauseberger, Walter I.

1991-01-01

Development programmes in Sahelian Africa are beginning to use geographic information system (GIS) technology. One of the GIS and remote sensing programmes introduced to the region in the late 1980s was the use of seasonal vegetation maps made from satellite data to support grasshopper and locust control. Following serious outbreaks of these pests in 1987, the programme addressed a critical need, by national and international crop protection organizations, to monitor site-specific dynamic vegetation conditions associated with grasshopper and locust breeding. The primary products used in assessing vegetation conditions were vegetation index (greenness) image maps derived from National Oceanic and Atmospheric Administration satellite imagery. Vegetation index data were integrated in a GIS with digital cartographic data of individual Sahelian countries. These near-real-time image maps were used regularly in 10 countries for locating potential grasshopper and locust habitats. The programme to monitor vegetation conditions is currently being institutionalized in the Sahel.

GIS and geotechnical mapping of expansive soil in Toshka region

Directory of Open Access Journals (Sweden)

Mary Labib

2013-09-01

Full Text Available This paper presents the results of a subsurface site investigation that was performed to characterize different soil and rock formations along Sheikh Zayed canal with particular emphasis on the swelling characteristics of the clays in that area. Site-specific empirical correlations were developed to predict the clay swelling potential and pressure from simple and economic laboratory test results. The data were input into a Geographic Information System (GIS framework to provide interactive maps that show the spatial distribution of the variables and identify their characteristics. These maps are then used to easily identify the values of swelling pressure/potential at various locations. This research provides a tool that is based on simple index tests that can be used to provide data that otherwise would require elaborate and costly investigations; the GIS framework allows storing, retrieving and updating these data easily to assist taking supported decisions dynamically.

Środowisko programowe Microstation dla celów GIS

OpenAIRE

Kunz, Mieczysław

2001-01-01

Praca przedstawia środowisko programowe MicroStation – historię jego rozwoju, strukturę oraz opisuje wybrane aplikacje dla zastosowań GIS/SIT. Na Wydziale BiNoZ UMK jest on stosowany do tworzenia map i systemów GIS dla wybranych obszarów Borów Tucholskich i Kujaw. Paper presents the MicroStation software – the history of its evolution, structure and description of the extension for GIS/SIT applications. Its applied for the map creation and GIS for selected region of Bory Tucholskie and K...

A GIS tool for the economic assessment of renewable technologies

International Nuclear Information System (INIS)

Mahmmud, F.; Woods, J.; Watson, S.; Halliday, J.; Hossain, J.

1997-01-01

A Geographical Information System (GIS) has the potential to analyse a large area for the optimum selection and siting of renewable energy systems. This paper reports on a GIS based scheme for the economic assessment of a selected number of wind and photovoltaic systems in the state of Karnataka, in India. This involved the implementation of an appropriate GIS methodology. The preparation of the GIS database is often the most arduous task in GIS operations. Thus, a description of the GIS methodology and the preparation of the database for the analysis of a selection of wind and photovoltaic systems is given. This approach has enabled the identification of the high potential areas in terms of the levelised electricity costs. An overall assessment of the region for present and future scenarios is also given. (author)

Identifying Skill Requirements for GIS Positions: A Content Analysis of Job Advertisements

Science.gov (United States)

Hong, Jung Eun

2016-01-01

This study identifies the skill requirements for geographic information system (GIS) positions, including GIS analysts, programmers/developers/engineers, specialists, and technicians, through a content analysis of 946 GIS job advertisements from 2007-2014. The results indicated that GIS job applicants need to possess high levels of GIS analysis…

Evaluation of AirGIS: a GIS-based air pollution and human exposure modelling system

DEFF Research Database (Denmark)

Ketzel, Matthias; Berkowicz, Ruwim; Hvidberg, Martin

2011-01-01

This study describes in brief the latest extensions of the Danish Geographic Information System (GIS)-based air pollution and human exposure modelling system (AirGIS), which has been developed in Denmark since 2001 and gives results of an evaluation with measured air pollution data. The system...... shows, in general, a good performance for both long-term averages (annual and monthly averages), short-term averages (hourly and daily) as well as when reproducing spatial variation in air pollution concentrations. Some shortcomings and future perspectives of the system are discussed too....

Evaluating terrain based criteria for snow avalanche exposure ratings using GIS

Science.gov (United States)

Delparte, Donna; Jamieson, Bruce; Waters, Nigel

2010-05-01

Snow avalanche terrain in backcountry regions of Canada is increasingly being assessed based upon the Avalanche Terrain Exposure Scale (ATES). ATES is a terrain based classification introduced in 2004 by Parks Canada to identify "simple", "challenging" and "complex" backcountry areas. The ATES rating system has been applied to well over 200 backcountry routes, has been used in guidebooks, trailhead signs and maps and is part of the trip planning component of the AVALUATOR™, a simple decision-support tool for backcountry users. Geographic Information Systems (GIS) offers a means to model and visualize terrain based criteria through the use of digital elevation model (DEM) and land cover data. Primary topographic variables such as slope, aspect and curvature are easily derived from a DEM and are compatible with the equivalent evaluation criteria in ATES. Other components of the ATES classification are difficult to extract from a DEM as they are not strictly terrain based. An overview is provided of the terrain variables that can be generated from DEM and land cover data; criteria from ATES which are not clearly terrain based are identified for further study or revision. The second component of this investigation was the development of an algorithm for inputting suitable ATES criteria into a GIS, thereby mimicking the process avalanche experts use when applying the ATES classification to snow avalanche terrain. GIS based classifications were compared to existing expert assessments for validity. The advantage of automating the ATES classification process through GIS is to assist avalanche experts with categorizing and mapping remote backcountry terrain.

GEOGRAPHICALANALYSIS WITH GIS METHODOLOGY FOR A SUSTAINABLE USE OF LOGGING RESIDUES IN MOUNTAINOUS AREA

Directory of Open Access Journals (Sweden)

Raffaele Cavalli

2007-09-01

Full Text Available A GIS-based approach is presented in order to define a decision support system tool for strategic planning of forest biomass supply chain for a heating/energy use. The presented GIS-based approach focus its analysis on forest management data, road network characteristics, terrain features and chipping and transporting cost. According to two different heating plants location, results on the availability of logging residues for energy use are presented in form of cost supply curves. For the investigated case study, supply curves evidence that, also at local level, different locations of heating plants can affect the cost-efficient use of logging residues in form of wood chips.

Spatiotemporal Distribution of Gastrointestinal Tract Cancer through GIS over 2007-2012 in Kermanshah-Iran.

Science.gov (United States)

Reshadat, Sohyla; Saeidi, Shahram; Zangeneh, Ali Reza; Khademi, Nahid; Khasi, Keyvan; Ghasemi, SayedRamin; Gilan, Nader Rajabi

2015-01-01

Cancer is one of the common causes of disability and mortality in the world. The present study aimed to define the spatiotemporal distribution of gastrointestinal tract cancers using a geographic information system (GIS) over the time period of 2007-2012 in Kermanshah-Iran. The method of studying was descriptive-analytical as well as comparative with gastrointestinal tract cancer patients based in the City of Kermanshah over the time period covered. For data analysis, the GIS and SPSS 16.0 were applied. According to the pathological reports within the space of 5 years, 283 cases of gastrointestinal tract cancer (157 in males, 156 in females) were reported. The performed tests in terms of spatial distribution in the environment of GIS indicated that the disease demonstrated a clustered pattern in the City of Kermanshah. More to the point, some loci of this disease have emerged in the City of Kermanshah that in the first level, 6 neighborhoods with 29-59 cases of this disease per square kilometer and in the second level, 15-29 cases. Gastrointestinal tract cancer demonstrated an ascending trend within the space of 5 years of research and the spatiotemporal distribution of cancer featured a concentrated and clustered pattern in the City of Kermanshah.

The application of geographic information system (GIS) in forensics geoscience

OpenAIRE

McKinley, Jennifer

2017-01-01

Advances in technological developments in Geographic Information Systems (GIS) has enabled the application of GIS in landscape mapping, environmental management, natural hazard risk and disaster management. As geographi- cal information becomes more widely available through satel- lite and aerial imagery, the cost of software decreases and GIS expertise expands, it is most likely that the use of GIS will increase. The methodology has practical applications for police, crime scene investigator...

Integrating 3D Visualization and GIS in Planning Education

Science.gov (United States)

Yin, Li

2010-01-01

Most GIS-related planning practices and education are currently limited to two-dimensional mapping and analysis although 3D GIS is a powerful tool to study the complex urban environment in its full spatial extent. This paper reviews current GIS and 3D visualization uses and development in planning practice and education. Current literature…

Development of Web GIS for complex processing and visualization of climate geospatial datasets as an integral part of dedicated Virtual Research Environment

Science.gov (United States)

Gordov, Evgeny; Okladnikov, Igor; Titov, Alexander

2017-04-01

For comprehensive usage of large geospatial meteorological and climate datasets it is necessary to create a distributed software infrastructure based on the spatial data infrastructure (SDI) approach. Currently, it is generally accepted that the development of client applications as integrated elements of such infrastructure should be based on the usage of modern web and GIS technologies. The paper describes the Web GIS for complex processing and visualization of geospatial (mainly in NetCDF and PostGIS formats) datasets as an integral part of the dedicated Virtual Research Environment for comprehensive study of ongoing and possible future climate change, and analysis of their implications, providing full information and computing support for the study of economic, political and social consequences of global climate change at the global and regional levels. The Web GIS consists of two basic software parts: 1. Server-side part representing PHP applications of the SDI geoportal and realizing the functionality of interaction with computational core backend, WMS/WFS/WPS cartographical services, as well as implementing an open API for browser-based client software. Being the secondary one, this part provides a limited set of procedures accessible via standard HTTP interface. 2. Front-end part representing Web GIS client developed according to a "single page application" technology based on JavaScript libraries OpenLayers (http://openlayers.org/), ExtJS (https://www.sencha.com/products/extjs), GeoExt (http://geoext.org/). It implements application business logic and provides intuitive user interface similar to the interface of such popular desktop GIS applications, as uDIG, QuantumGIS etc. Boundless/OpenGeo architecture was used as a basis for Web-GIS client development. According to general INSPIRE requirements to data visualization Web GIS provides such standard functionality as data overview, image navigation, scrolling, scaling and graphical overlay, displaying map

Development of SOVAT: a numerical-spatial decision support system for community health assessment research.

Science.gov (United States)

Scotch, Matthew; Parmanto, Bambang

2006-01-01

The development of numerical-spatial routines is frequently required to solve complex community health problems. Community health assessment (CHA) professionals who use information technology need a complete system that is capable of supporting the development of numerical-spatial routines. Currently, there is no decision support system (DSS) that is effectively able to accomplish this task as the majority of public health geospatial information systems (GIS) are based on traditional (relational) database architecture. On-Line Analytical Processing (OLAP) is a multidimensional data warehouse technique that is commonly used as a decision support system in standard industry. OLAP alone is not sufficient for solving numerical-spatial problems that frequently occur in CHA research. Coupling it with GIS technology offers the potential for a very powerful and useful system. A community health OLAP cube was created by integrating health and population data from various sources. OLAP and GIS technologies were then combined to develop the Spatial OLAP Visualization and Analysis Tool (SOVAT). The synergy of numerical and spatial environments within SOVAT is shown through an elaborate and easy-to-use drag and drop and direct manipulation graphical user interface (GUI). Community health problem-solving examples (routines) using SOVAT are shown through a series of screen shots. The impact of the difference between SOVAT and existing GIS public health applications can be seen by considering the numerical-spatial problem-solving examples. These examples are facilitated using OLAP-GIS functions. These functions can be mimicked in existing GIS public applications, but their performance and system response would be significantly worse since GIS is based on traditional (relational) backend. OLAP-GIS system offer great potential for powerful numerical-spatial decision support in community health analysis. The functionality of an OLAP-GIS system has been shown through a series of

Web-GIS platform for green infrastructure in Bucharest, Romania

Science.gov (United States)

Sercaianu, Mihai; Petrescu, Florian; Aldea, Mihaela; Oana, Luca; Rotaru, George

2015-06-01

In the last decade, reducing urban pollution and improving quality of public spaces became a more and more important issue for public administration authorities in Romania. The paper describes the development of a web-GIS solution dedicated to monitoring of the green infrastructure in Bucharest, Romania. Thus, the system allows the urban residents (citizens) to collect themselves and directly report relevant information regarding the current status of the green infrastructure of the city. Consequently, the citizens become an active component of the decision-support process within the public administration. Besides the usual technical characteristics of such geo-information processing systems, due to the complex legal and organizational problems that arise in collecting information directly from the citizens, additional analysis was required concerning, for example, local government involvement, environmental protection agencies regulations or public entities requirements. Designing and implementing the whole information exchange process, based on the active interaction between the citizens and public administration bodies, required the use of the "citizen-sensor" concept deployed with GIS tools. The information collected and reported from the field is related to a lot of factors, which are not always limited to the city level, providing the possibility to consider the green infrastructure as a whole. The "citizen-request" web-GIS for green infrastructure monitoring solution is characterized by a very diverse urban information, due to the fact that the green infrastructure itself is conditioned by a lot of urban elements, such as urban infrastructures, urban infrastructure works and construction density.

Engaging Local Communities in Arctic Observing Networks: A Collaborative Shoreline Change Risk WebGIS for Alaska's Arctic Slope Region

Science.gov (United States)

Brady, M.

2017-12-01

This study engaged local community stakeholders in Alaska's Arctic Slope Region to develop a web-based shoreline change risk geographic information system (WebGIS) in collaboration with the North Slope Borough and its residents. The value of the effort includes rich spatial documentation of local risks across the vast, remote, and rapidly changing shoreline, and identification of local manager information needs to direct WebGIS development. The study advances our understanding of shoreline change problems from the perspective of local Arctic communities beyond municipal impacts while building decision support. Over fifty local residents in three communities with collective coastal knowledge that extends across the National Petroleum Reserve - Alaska and Arctic National Wildlife Refuge shared their perspectives on hard copy maps. Sixteen managers provided usability perceptions of a beta WebGIS with shoreline change susceptibility information summarized at relevant asset locations such as subsistence camps. The hard copy maps with 300 "problem places" were digitized for analysis, which revealed problems across the coastline, especially challenges to boating for subsistence hunting such as shoaling cutting off access and creating hazards. The usability workshop revealed specific information needs including the need to monitor impacts at decommissioned national defense radar sites repurposed by locals to centralize oil and gas activity. These results were analyzed using an Instructional Systems Design (ISD) framework consisting of front-end and formative WebGIS evaluation phases. The front-end evaluation is the local input on hard copy maps, which provided local verification of coastal risks. The formative evaluation is the usability workshop with managers, which informed WebGIS development while promoting user buy-in. In terms of product and process, the local knowledge and information needs collected are significant because they establish local engagement with the

Towards a Public Sector GIS Evaluation Methodology | Kurwakumire ...

African Journals Online (AJOL)

Towards a Public Sector GIS Evaluation Methodology. ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING AJOL · RESOURCES ... However, evaluation methodologies for public sector GIS are largely lacking.

New functions of the este system - new possibilities for emergency response

International Nuclear Information System (INIS)

Carny, P.

2005-01-01

The ESTE system (Emergency Source Term Evaluation) is support instrument for off-site emergency response and its main objective is to assist to the crisis staff: - to mitigate radiological consequences of significant releases; - to manage the protective measures; - to manage emergency monitoring. At national level the ESTE system are implemented at the Emergency Response Centre of the Czech Republic (SUJB) and Austrian versions are implemented at the Crisis Centre of the Austrian Republic (BMLFUW). ESTE system can now be utilized not only in close (40 km) vicinity of the point of the release (NPP), but radiological impacts are now calculated across the whole country or over the country border. Puff Trajectory Model (PTM) with the background of geographical information system (GIS) is included in este. Numerical weather prediction data (wind fields) predicted for the whole or the part of the country are online connected with este and utilized for the puffs movement simulation and impacts calculations. It means that not only meteorological data from the point of release (measured or predicted), but 'meteorological data wind field' predicted for larger region across the country are used by the este system. (author)

Dose-Response Calculator for ArcGIS

Science.gov (United States)

Hanser, Steven E.; Aldridge, Cameron L.; Leu, Matthias; Nielsen, Scott E.

2011-01-01

The Dose-Response Calculator for ArcGIS is a tool that extends the Environmental Systems Research Institute (ESRI) ArcGIS 10 Desktop application to aid with the visualization of relationships between two raster GIS datasets. A dose-response curve is a line graph commonly used in medical research to examine the effects of different dosage rates of a drug or chemical (for example, carcinogen) on an outcome of interest (for example, cell mutations) (Russell and others, 1982). Dose-response curves have recently been used in ecological studies to examine the influence of an explanatory dose variable (for example, percentage of habitat cover, distance to disturbance) on a predicted response (for example, survival, probability of occurrence, abundance) (Aldridge and others, 2008). These dose curves have been created by calculating the predicted response value from a statistical model at different levels of the explanatory dose variable while holding values of other explanatory variables constant. Curves (plots) developed using the Dose-Response Calculator overcome the need to hold variables constant by using values extracted from the predicted response surface of a spatially explicit statistical model fit in a GIS, which include the variation of all explanatory variables, to visualize the univariate response to the dose variable. Application of the Dose-Response Calculator can be extended beyond the assessment of statistical model predictions and may be used to visualize the relationship between any two raster GIS datasets (see example in tool instructions). This tool generates tabular data for use in further exploration of dose-response relationships and a graph of the dose-response curve.

Computer-based instrumentation for partial discharge detection in GIS

International Nuclear Information System (INIS)

Md Enamul Haque; Ahmad Darus; Yaacob, M.M.; Halil Hussain; Feroz Ahmed

2000-01-01

Partial discharge is one of the prominent indicators of defects and insulation degradation in a Gas Insulated Switchgear (GIS). Partial discharges (PD) have a harmful effect on the life of insulation of high voltage equipment. The PD detection using acoustic technique and subsequent analysis is currently an efficient method of performing non-destructive testing of GIS apparatus. A low cost PC-based acoustic PD detection instrument has been developed for the non-destructive diagnosis of GIS. This paper describes the development of a PC-based instrumentation system for partial discharge detection in GIS and some experimental results have also presented. (Author)

Review of supplemental oxygen and respiratory support for paediatric emergency care in sub-Saharan Africa

Directory of Open Access Journals (Sweden)

Andreas Hansmann

Full Text Available Introduction: In African countries, respiratory infections and severe sepsis are common causes of respiratory failure and mortality in children under five years of age. Mortality and morbidity in these children could be reduced with adequate respiratory support in the emergency care setting. The purpose of this review is to describe management priorities in the emergency care of critically ill children presenting with respiratory problems. Basic and advanced respiratory support measures are described for implementation according to available resources, work load and skill-levels. Methods: We did a focused search of respiratory support for critically ill children in resource-limited settings over the past ten years, using the search tools PubMed and Google Scholar, the latest WHO guidelines, international ‘Advanced Paediatric Life Support’ guidelines and paediatric critical care textbooks. Results: The implementation of triage and rapid recognition of respiratory distress and hypoxia with pulse oximetry is important to correctly identify critically ill children with increased risk of mortality in all health facilities in resource constrained settings. Basic, effective airway management and respiratory support are essential elements of emergency care. Correct provision of supplemental oxygen is safe and its application alone can significantly improve the outcome of critically ill children. Non-invasive ventilatory support is cost-effective and feasible, with the potential to improve emergency care packages for children with respiratory failure and other organ dysfunctions. Non-invasive ventilation is particularly important in severely under-resourced regions unable to provide intubation and invasive mechanical ventilation support. Malnutrition and HIV-infection are important co-morbid conditions, associated with increased mortality in children with respiratory dysfunction. Discussion: A multi-disciplinary approach is required to optimise

Appennino: A GIS Tool for Analyzing Wildlife Habitat Use

Directory of Open Access Journals (Sweden)

Marco Ferretti

2012-01-01

Full Text Available The aim of the study was to test Appennino, a tool used to evaluate the habitats of animals through compositional analysis. This free tool calculates an animal’s habitat use within the GIS platform for ArcGIS and saves and exports the results of the comparative land uses to other statistical software. Visual Basic for Application programming language was employed to prepare the ESRI ArcGIS 9.x utility. The tool was tested on a dataset of 546 pheasant positions obtained from a study carried out in Tuscany (Italy. The tool automatically gave the same results as the results obtained by calculating the surfaces in ESRI ArcGIS, exporting the data from the ArcGIS, then using a commercial spreadsheet and/or statistical software to calculate the animal’s habitat use with a considerable reduction in time.

GIS as a Tool for Education Decision Support System: A Demonstration with Public Primary Schools in Zaria City Kaduna State Nigeria

Directory of Open Access Journals (Sweden)

U. Wali

2015-07-01

Full Text Available This paper aimed at demonstrating the use of GIS in the display of data about primary schools in the walled part of Zaria city, Kaduna State. It is hoped that the database and its graphic display in maps will guide decision making at the primary education level in the study area. Coordinates of the schools were obtained with a handheld GPS receiver, while their attribute data were obtained from the local education authority and triangulated with questionnaires administered to the headmasters of the schools. ArcGIS 9.2 version software was used for buffer zone (1 km. The result indicates that there are 31 public primary schools in the study area. The oldest was established in 1921 and the latest in 2007. Graphic displays of some attributes of the schools were produced. The buffer zones produced suggest no pupil walks more than a kilometer to reach school. It is recommended that in the future, GIS tools should be applied when managing school data. Capacities to achieve this should be developed.

GRASS GIS: a peer-reviewed scientific platform and future research repository

Science.gov (United States)

Chemin, Yann; Petras, Vaclav; Petrasova, Anna; Landa, Martin; Gebbert, Sören; Zambelli, Pietro; Neteler, Markus; Löwe, Peter; Di Leo, Margherita

2015-04-01

GRASS GIS version 7 as imagery modules and replicability is complete for future research. A set of modules for multiscale analysis of landscape structure was added in 1992 by [1], who developed the r.le model similar to FRAGSTATS ([10]). The modules were gradually improved to become r.li in 2006. Further development continued, with a significant speed up [9] and new interactive user interface. The development of spatial interpolation module v.surf.rst started in 1988 [11] and continued by introduction of new interpolation methods and finally full integration into GRASS GIS version 4 [13]. Since then it was improved several times [8]. The module is an important part of GRASS GIS and is taught at geospatial modeling courses, for example at North Carolina State University [14]. GRASS GIS entails several modules that constitute the result of active research on natural hazard. The r.sim.water simulation model [12] for overland flow under rainfall excess conditions was integrated into the Emergency Routing Decision Planning system as a WPS [17]. It was also utilized by [16] and is now part of Tangible Landscape, a tangible GIS system, which also incorporated the r.damflood, a dam break inundation simulation [2]. The wildfire simulation toolset, originally developed by [24], implementing Rothermel's model [21], available through the GRASS GIS modules r.ros and r.spread, is object of active research. It has been extensively tested and recently adapted to European fuel types ([5, 19, 20]). References [1] Baker, W.L., Cai, Y., 1992. The r.le programs for multiscale analysis of landscape structure using the GRASS geographical information system. Landscape Ecology, 7(4):291-302. [2] Cannata M. and Marzocchi R., 2012. Two-dimensional dam break flooding simulation: a GIS embedded approach. - Natural Hazards 61(3):1143-1159. [3] Chemin, Y.H., 2012. A Distributed Benchmarking Framework for Actual ET Models. In Evapotranspiration - Remote Sensing and Modeling, Intech (Eds). [4] Chemin

The research and implementation of coalfield spontaneous combustion of carbon emission WebGIS based on Silverlight and ArcGIS server

International Nuclear Information System (INIS)

Zhu, Z; Bi, J; Wang, X; Zhu, W

2014-01-01

As an important sub-topic of the natural process of carbon emission data public information platform construction, coalfield spontaneous combustion of carbon emission WebGIS system has become an important study object. In connection with data features of coalfield spontaneous combustion carbon emissions (i.e. a wide range of data, which is rich and complex) and the geospatial characteristics, data is divided into attribute data and spatial data. Based on full analysis of the data, completed the detailed design of the Oracle database and stored on the Oracle database. Through Silverlight rich client technology and the expansion of WCF services, achieved the attribute data of web dynamic query, retrieval, statistical, analysis and other functions. For spatial data, we take advantage of ArcGIS Server and Silverlight-based API to invoke GIS server background published map services, GP services, Image services and other services, implemented coalfield spontaneous combustion of remote sensing image data and web map data display, data analysis, thematic map production. The study found that the Silverlight technology, based on rich client and object-oriented framework for WCF service, can efficiently constructed a WebGIS system. And then, combined with ArcGIS Silverlight API to achieve interactive query attribute data and spatial data of coalfield spontaneous emmission, can greatly improve the performance of WebGIS system. At the same time, it provided a strong guarantee for the construction of public information on China's carbon emission data

The Changing Nature of GIS and the Provision of Formal GIS Education in the UK: A Case Study

Science.gov (United States)

Walford, Nigel

2017-01-01

The arrival of the term Geographical Information System (GIS) in the 1960s soon created a demand for training and education in the use of this specialist hardware and software. Initially the main focus was on training people to use GIS, formal named degree programmes leading to postgraduate and undergraduate qualifications arrived later. This…

From Workshop to Classroom: Bridging GIS Success

Science.gov (United States)

Stonier, Francis; Hong, Jung Eun

2016-01-01

This article shares the first-time geographic information system (GIS) experiences of two advanced placement human geography classes. The teacher had participated in a summer GIS workshop and then brought those skills into her classroom for the students' benefit. Eighteen students shared their experiences researching their family history, working…

GIS risk analysis of hazardous materials transport

International Nuclear Information System (INIS)

Anders, C.; Olsten, J.

1991-01-01

The Geographic Information System (GIS) was used to assess the risks and vulnerability of transporting hazardous materials and wastes (such as gasoline, explosives, poisons, etc) on the Arizona highway system. This paper discusses the methodology that was utilized, and the application of GIS systems to risk analysis problems

FY 1999 basic survey of coal resource development. Coal GIS survey; 1999 nendo sekitan shigen kaihatsu kiso chosa. Sekitan GIS chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The purpose of this survey is to construct a comprehensive coal field assessment technology system which can promptly cope with any natural conditions/geological situations of coal field. As to the GIS (geographical information system) which can unifiedly manage/analyze various data being used in other fields, survey was conducted of present situations/technology trends of the resource related GIS, and at the same time the survey is aimed at applying it to the coal resource field. In the survey in this fiscal year, based on the survey made in FY 1998, applicability of GIS function was verified for Australia where the coal GIS is prepared. And the fundamental design was made to construct a coal GIS considered of concrete application in the stage of coal resource exploration and resource assessment. In the fundamental design, prototypes of individual functions of the system were made. Making the analysis using the actual data, expansion and complication of the system size were advanced step by step toward the completion of the system. Such prototypical development method was adopted. (NEDO)

Quantitative methods and socio-economic applications in GIS

CERN Document Server

Wang, Fahui

2014-01-01

GIS AND BASIC SPATIAL ANALYSIS TASKSGetting Started with ArcGIS: Data Management and Basic Spatial Analysis ToolsSpatial and Attribute Data Management in ArcGISSpatial Analysis Tools in ArcGIS: Queries, Spatial Joins, and Map OverlaysCase Study 1: Mapping and Analyzing Population Density Pattern in Baton Rouge, LouisianaSummaryIdentifying Contiguous Polygons by Spatial Analysis ToolsMeasuring Distance and TimeMeasures of DistanceComputing Network Distance and TimeThe Distance Decay RuleCase Study 2: Computing Distances and Tra

Designing Science Learning Environments That Support Emerging Bilingual Students to Problematize Electrical Phenomena

Science.gov (United States)

Suarez, Enrique A.

This dissertation investigates how emerging bilingual students make sense of natural phenomena through engaging in certain epistemic practices of science, and the elements of the learning environment that created those opportunities. Specifically, the dissertation focuses on how emerging bilingual students problematized electrical phenomena, like electric flow and electrical resistance, and how the design features of the environment (e.g., sequencing of activities, linguistic practices) may have supported students as they made sense of phenomena. The first study describes how for students presented and evaluated mechanistic models of electric flow, focusing specifically on how students identified and negotiated a disagreement between their explanatory models. The results from this study highlight the complexity of students' disagreements, not only because of the epistemological aspects related to presenting and evaluating knowledge, but also due to interpersonal dynamics and the discomfort associated with disagreeing with another person. The second study focuses on the design features of the learning environment that supported emerging bilingual students' investigations of electrical phenomena. The findings from this study highlight how a carefully designed set of activities, with the appropriate material resources (e.g., experimental tools), could support students to problematize electrical resistance. The third study describes how emerging bilingual students engaged in translanguaging practices and the contextual features of the learning environment that created and hindered opportunities for translanguaging. The findings from this study identify and articulate how emerging bilingual students engaged in translanguaging practices when problematizing electrical resistance, and strengthen the perspective that, in order to be equitable for emerging bilingual students, science learning environments need to act as translanguaging spaces. This dissertation makes three

The Embodied GIS. Using Mixed Reality to explore multi-sensory archaeological landscapes

Directory of Open Access Journals (Sweden)

Stuart Eve

2017-06-01

Full Text Available We are at a turning point in development and thought about multi-sensorial engagement using digital mediation. From Oculus Rift VR goggles, Google Cardboard, noise-reducing headphones, vibrating-haptic simulating gloves, smell generators and virtual treadmills, every week a new technology or software emerges that can be used to virtualise, augment or diminish our reality, across all of our senses. In many cases these technologies have been used by archaeologists or museum professionals to didactically present or reconstruct archaeological sites or artefacts. However, Mixed Reality is rarely used to actively explore or analyse archaeological sites. This article explores a number of ways that these new multi-sensory developments can be harnessed and linked to a traditional GIS database using Mixed Reality. Through the example of three different sensory applications, I will demonstrate the implementation of an embodied GIS – allowing a multi-sensorial experience of archaeological data in situ, and enabling archaeologists to explore data in new ways, encouraging new interpretations by thinking and working through the body.

Data Driven Program Planning for GIS Instruction

Science.gov (United States)

Scarletto, Edith

2013-01-01

This study used both focus groups (qualitative) and survey data (quantitative) to develop and expand an instruction program for GIS services. It examined the needs and preferences faculty and graduate students have for learning about GIS applications for teaching and research. While faculty preferred in person workshops and graduate students…

Determining spatio-temporal distribution of bee forage species of Al-Baha region based on ground inventorying supported with GIS applications and Remote Sensed Satellite Image analysis

Directory of Open Access Journals (Sweden)

Nuru Adgaba

2017-07-01

Full Text Available In arid zones, the shortage of bee forage is critical and usually compels beekeepers to move their colonies in search of better forages. Identifying and mapping the spatiotemporal distribution of the bee forages over given area is important for better management of bee colonies. In this study honey bee plants in the target areas were inventoried following, ground inventory work supported with GIS applications. The study was conducted on 85 large plots of 50 × 50 m each. At each plot, data on species name, height, base diameter, crown height, crown diameter has been taken for each plant with their respective geographical positions. The data were stored, and processed using Trimble GPS supported with ArcGIS10 software program. The data were used to estimate the relative frequency, density, abundance and species diversity, species important value index and apicultural value of the species. In addition, Remotely Sensed Satellite Image of the area was obtained and processed using Hopfield Artificial Neural Network techniques. During the study, 182 species from 49 plant families were identified as bee forages of the target area. From the total number of species; shrubs, herbs and trees were accounting for 61%, 27.67%, and 11.53% respectively. Of which Ziziphus spina-christi, Acacia tortilis, Acacia origina, Acacia asak, Lavandula dentata, and Hypoestes forskaolii were the major nectar source plants of the area in their degree of importance. The average vegetation cover values of the study areas were low (<30% with low Shannon’s species diversity indices (H′ of 0.5–1.52 for different sites. Based on the eco-climatological factors and the variations in their flowering period, these major bee forage species were found to form eight distinct spatiotemporal categories which allow beekeepers to migrate their colonies to exploit the resources at different seasons and place. The Remote Sensed Satellite Image analysis confirmed the spatial

Il GIS sulle note di violino

Directory of Open Access Journals (Sweden)

Redazione Redazione

2005-02-01

Full Text Available La conferenza della comunità GIS italiana senza ombra di dubbio può essere assimilata alla annuale conferenza degli Utenti ESRI, che per presenza e temi non ha eguali ne come appuntamento nè come presenze. Non ce ne vogliano gli altri players delle tecnologie GIS, nè tanto meno gli organizzatori di altre conferenze nazionali quale ASITA

Freeware for GIS and Remote Sensing

OpenAIRE

Lena Halounová

2007-01-01

Education in remote sensing and GIS is based on software utilization. The software needs to be installed in computer rooms with a certain number of licenses. The commercial software equipment is therefore financially demanding and not only for universities, but especially for students. Internet research brings a long list of free software of various capabilities. The paper shows a present state of GIS, image processing and remote sensing free software.

A Review on the Application of GIS in Land Use Planning

OpenAIRE

CHE, Wentao; ABE, Daishu; MASUDA, Noboru; SHIMOMURA, Yasuhiko; YAMAMOTO, Satoshi

1995-01-01

In the last decade, we have seen the rapid development of GIS methods that are capable of being applied to land use planning. This paper tries to give a general review on the past and the near future of GIS applications in this area by the following steps. Firstly, a brief definition of land use planning and GIS, and the reasons why GIS are so widely used in land use planning are presented. Secondly, the history of GIS development in the past three decades is briefly considered. Thirdly, some...

A practical demonstration in modelling diclofenac and propranolol river water concentrations using a GIS hydrology model in a rural UK catchment

Energy Technology Data Exchange (ETDEWEB)

Johnson, A.C. [Centre for Ecology and Hydrology (CEH) Wallingford, Benson Lane, Wallingford, Oxfordshire OX10 8BB (United Kingdom)]. E-mail: ajo@ceh.ac.uk; Keller, V. [Centre for Ecology and Hydrology (CEH) Wallingford, Benson Lane, Wallingford, Oxfordshire OX10 8BB (United Kingdom); Williams, R.J. [Centre for Ecology and Hydrology (CEH) Wallingford, Benson Lane, Wallingford, Oxfordshire OX10 8BB (United Kingdom); Young, A. [Centre for Ecology and Hydrology (CEH) Wallingford, Benson Lane, Wallingford, Oxfordshire OX10 8BB (United Kingdom)

2007-03-15

An existing GIS hydrology water quality model, LF2000-WQX, was applied to predict the concentrations of the pharmaceuticals diclofenac and propranalol in catchments. As a practical exercise the predominantly rural Tamar (UK) catchment was chosen. Consumption, excretion, and fate data were used to estimate the pharmaceutical input load for the model. The predicted concentrations throughout most of the catchment were 1 ng/L or less under low flow (90th percentile) conditions. However, at a few locations, downstream of small sewage treatment plants, concentrations above 25 ng/L were predicted. This exercise shows that it is relatively straightforward to predict the concentrations of new and emerging organic microcontaminants in real catchments using existing GIS hydrology water quality models. Further testing will be required to establish their accuracy. - A GIS hydrology model was used to predict pharmaceutical concentration hot spots in a rural catchment.

A practical demonstration in modelling diclofenac and propranolol river water concentrations using a GIS hydrology model in a rural UK catchment

International Nuclear Information System (INIS)

Johnson, A.C.; Keller, V.; Williams, R.J.; Young, A.

2007-01-01

An existing GIS hydrology water quality model, LF2000-WQX, was applied to predict the concentrations of the pharmaceuticals diclofenac and propranalol in catchments. As a practical exercise the predominantly rural Tamar (UK) catchment was chosen. Consumption, excretion, and fate data were used to estimate the pharmaceutical input load for the model. The predicted concentrations throughout most of the catchment were 1 ng/L or less under low flow (90th percentile) conditions. However, at a few locations, downstream of small sewage treatment plants, concentrations above 25 ng/L were predicted. This exercise shows that it is relatively straightforward to predict the concentrations of new and emerging organic microcontaminants in real catchments using existing GIS hydrology water quality models. Further testing will be required to establish their accuracy. - A GIS hydrology model was used to predict pharmaceutical concentration hot spots in a rural catchment

An Approach to Teaching Applied GIS: Implementation for Local Organizations.

Science.gov (United States)

Benhart, John, Jr.

2000-01-01

Describes the instructional method, Client-Life Cycle GIS Project Learning, used in a course at Indiana University of Pennsylvania that enables students to learn with and about geographic information system (GIS). Discusses the course technical issues in GIS and an example project using this method. (CMK)

GISMOVA. GIS-baseret moniteringsstrategi i vandforsyningen. 2. del - Vejledning

OpenAIRE

Larsen, Sille Lyster; Christensen, Sarah Christine Boesgaard; Albrechtsen, Hans-Jørgen; Rygaard, Martin

2015-01-01

GISMOVA - GIS-baseret MOniteringsstrategi i VAndforsyningen – er en GIS-baseret analysemetode til at udpege prøvetagningssteder, til kontrol af drikkevandskvalitet i vandforsyningens distributionssystem. Første del: GISMOVA - GIS-baseret Moniteringsstrategi i Vandforsyningen. 1. del - Introduktion, baggrund og metode, beskriver baggrunden for GISMOVA, samt sammenfatning og inspiration til metoden (Larsen et al. 2015). Denne 2. del demonstrerer GISMOVA, anvendt på VandCenter Syds (VCS) distrib...

Visualizing Opportunities: GIS Skills for Retail Marketing

Science.gov (United States)

Wu, Peter Y.; Rathswohl, Eugene

2011-01-01

Business students need to develop skills in the intelligent use of information, especially spatial information, for decision-making. Geographic Information System (GIS) is a viable tool for that purpose. Yet the few GIS courses in the Information Systems curriculum offered in various business schools tend to focus on different concepts and skills.…

WEB-GIS SOLUTIONS DEVELOPMENT FOR CITIZENS AND WATER COMPANIES

Directory of Open Access Journals (Sweden)

M. Şercăianu

2013-05-01

Full Text Available This paper describes the development of a web-GIS solution in which urban residents, from Buzau City, could be involved in decision-support process of water companies, in order to reduce water losses, by collecting information directly from citizens. In recent years, reducing material and economic losses, recorded in the entire municipal networks management process has become the main focus of public companies in Romania. Due to problems complexity that arise in collecting information from citizens and issues identified in urban areas, more analyzes were required related to web-GIS solutions used in areas such as local government, public utilities, environmental protection or financial management. Another important problem is the poor infrastructure development of spatial databases founded in public companies, and connection to web platforms. Developing the entire communication process between residents and municipal companies has required the use of concept "citizen-sensor" in the entire reporting process. Reported problems are related to water distribution networks with the possibility of covering the entire public utilities infrastructure.

Nuclear emergency response exercises and decision support systems - integrating domestic experience with international reference systems

International Nuclear Information System (INIS)

Slavnicu, D.S.; Vamanu, D.V.; Gheorghiu, D.; Acasandrei, V.T.; Slavnicu, E.

2010-01-01

The paper glosses on the experience of a research-oriented team routinely involved in emergency preparedness and response management activities, with the assimilation, implementation, and application of decision support systems (DSS) of continental reference in Europe, and the development of supportive, domestic radiological assessment tools. Two exemplary nuclear alert exercises are discussed, along with solutions that emerged during drill planning and execution, to make decision support tools of various origins and strength to work synergistically and complement each other. (authors)

A Review and Framework for Categorizing Current Research and Development in Health Related Geographical Information Systems (GIS) Studies.

Science.gov (United States)

Lyseen, A K; Nøhr, C; Sørensen, E M; Gudes, O; Geraghty, E M; Shaw, N T; Bivona-Tellez, C

2014-08-15

The application of GIS in health science has increased over the last decade and new innovative application areas have emerged. This study reviews the literature and builds a framework to provide a conceptual overview of the domain, and to promote strategic planning for further research of GIS in health. The framework is based on literature from the library databases Scopus and Web of Science. The articles were identified based on keywords and initially selected for further study based on titles and abstracts. A grounded theory-inspired method was applied to categorize the selected articles in main focus areas. Subsequent frequency analysis was performed on the identified articles in areas of infectious and non-infectious diseases and continent of origin. A total of 865 articles were included. Four conceptual domains within GIS in health sciences comprise the framework: spatial analysis of disease, spatial analysis of health service planning, public health, health technologies and tools. Frequency analysis by disease status and location show that malaria and schistosomiasis are the most commonly analyzed infectious diseases where cancer and asthma are the most frequently analyzed non-infectious diseases. Across categories, articles from North America predominate, and in the category of spatial analysis of diseases an equal number of studies concern Asia. Spatial analysis of diseases and health service planning are well-established research areas. The development of future technologies and new application areas for GIS and data-gathering technologies such as GPS, smartphones, remote sensing etc. will be nudging the research in GIS and health.

A Review and Framework for Categorizing Current Research and Development in Health Related Geographical Information Systems (GIS) Studies

Science.gov (United States)

Nøhr, C.; Sørensen, E. M.; Gudes, O.; Geraghty, E. M.; Shaw, N. T.; Bivona-Tellez, C.

2014-01-01

Summary Objectives The application of GIS in health science has increased over the last decade and new innovative application areas have emerged. This study reviews the literature and builds a framework to provide a conceptual overview of the domain, and to promote strategic planning for further research of GIS in health. Method The framework is based on literature from the library databases Scopus and Web of Science. The articles were identified based on keywords and initially selected for further study based on titles and abstracts. A grounded theory-inspired method was applied to categorize the selected articles in main focus areas. Subsequent frequency analysis was performed on the identified articles in areas of infectious and non-infectious diseases and continent of origin. Results A total of 865 articles were included. Four conceptual domains within GIS in health sciences comprise the framework: spatial analysis of disease, spatial analysis of health service planning, public health, health technologies and tools. Frequency analysis by disease status and location show that malaria and schistosomiasis are the most commonly analyzed infectious diseases where cancer and asthma are the most frequently analyzed non-infectious diseases. Across categories, articles from North America predominate, and in the category of spatial analysis of diseases an equal number of studies concern Asia. Conclusion Spatial analysis of diseases and health service planning are well-established research areas. The development of future technologies and new application areas for GIS and data-gathering technologies such as GPS, smartphones, remote sensing etc. will be nudging the research in GIS and health. PMID:25123730

Exploring the role of GIS during community health assessment problem solving: experiences of public health professionals

Directory of Open Access Journals (Sweden)

Scotch Matthew

2006-09-01

Full Text Available Abstract Background A Community health assessment (CHA involves the use of Geographic Information Systems (GIS in conjunction with other software to analyze health and population data and perform numerical-spatial problem solving. There has been little research on identifying how public health professionals integrate this software during typical problem solving scenarios. A better understanding of this is needed to answer the "What" and the "How". The "What" identifies the specific software being used and the "How" explains the way they are integrated together during problem solving steps. This level of understanding will highlight the role of GIS utilization during problem solving and suggest to developers how GIS can be enhanced to better support data analysis during community health assessment. Results An online survey was developed to identify the information technology used during CHA analysis. The tasks were broken down into steps and for our analysis these steps were categorized by action: Data Management/Access, Data Navigation, Geographic Comparison, Detection of Spatial Boundaries, Spatial Modelling, and Ranking Analysis. 27 CHA professionals completed the survey, with the majority of participants (14 being from health departments. Statistical software (e.g. SPSS was the most popular software for all but one of the types of steps. For this step (detection of spatial boundaries, GIS was identified as the most popular technology. Conclusion Most CHA professionals indicated they use statistical software in conjunction with GIS. The statistical software appears to drive the analysis, while GIS is used primarily for simple spatial display (and not complex spatial analysis. This purpose of this survey was to thoroughly examine into the process of problem solving during community health assessment data analysis and to gauge how GIS is integrated with other software for this purpose. These findings suggest that GIS is used more for spatial

The benefits of GIS to land use planning

Science.gov (United States)

Strielko, Irina; Pereira, Paulo

2014-05-01

The development of information technologies has significantly changed the approach to land use and spatial planning, management of natural resources. GIS considerably simplifies territorial planning operating analyzing necessary data concerning their spatial relationship that allows carrying out complex assessment of the situation and creates a basis for adoption of more exact and scientifically reasonable decisions in the course of land use. To assess the current land use situation and the possibility of modeling possible future changes associated with complex of adopted measures GIS allows the integration of diverse spatial data, for example, data about soils, climate, vegetation, and other and also to visualize available information in the form of maps, graphs or charts, 3D models. For the purposes of land use GIS allow using data of remote sensing, which allows to make monitoring of anthropogenic influence in a particular area and estimate scales and rates of degradation of green cover, flora and fauna. Assessment of land use can be made in complex or componentwise, indicating the test sites depending on the goals. GIS make it easy to model spatial distribution of various types of pollution of stationary and mobile sources in soil, atmosphere and the hydrological network. Based on results of the analysis made by GIS choose the optimal solutions of land use that provide the minimum impact on environment, make optimal decisions of conflict associated with land use and control of their using. One of the major advantages of using GIS is possibility of the complex analysis in concrete existential aspect. Analytical opportunities of GIS define conditionality of spatial distribution of objects and interrelation communication between them. For a variety of land management objectives analysis method is chosen based on the parameters of the problem and parameters of use of its results.

Operational SAR Data Processing in GIS Environments for Rapid Disaster Mapping

Science.gov (United States)

Bahr, Thomas

2014-05-01

DEM without the need of ground control points. This step includes radiometric calibration. (3) A subsequent change detection analysis generates the final map showing the extent of the flash flood on Nov. 5th 2010. The underlying algorithms are provided by three different sources: Geocoding & radiometric calibration (2) is a standard functionality from the commercial SARscape Toolbox for ArcGIS. This toolbox is extended by the filter tool (1), which is called from the SARscape modules in ENVI. The change detection analysis (3) is based on ENVI processing routines and scripted with IDL. (2) and (3) are integrated with ArcGIS using a predefined Python interface. These 3 processing steps are combined using the ArcGIS ModelBuilder to create a new model for rapid disaster mapping in ArcGIS, based on SAR data. Moreover, this model can be dissolved from its desktop environment and published to users across the ArcGIS Server enterprise. Thus disaster zones, e.g. after severe flooding, can be automatically identified and mapped to support local task forces - using an operational workflow for SAR image analysis, which can be executed by the responsible operators without SAR expert knowledge.

Technical Potential Assessment for the Renewable Energy Zone (REZ) Process: A GIS-Based Approach

Energy Technology Data Exchange (ETDEWEB)

Lee, Nathan [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Roberts, Billy J [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-04-05

Geographic Information Systems (GIS)-based energy resource and technical potential assessments identify areas capable of supporting high levels of renewable energy (RE) development as part of a Renewable Energy Zone (REZ) Transmission Planning process. This document expands on the REZ Process to aid practitioners in conducting GIS-based RE resource and technical potential assessments. The REZ process is an approach to plan, approve, and build transmission infrastructure that connects REZs - geographic areas that have high-quality RE resources, suitable topography and land-use designations, and demonstrated developer interest - to the power system. The REZ process helps to increase the share of solar photovoltaic (PV), wind, and other resources while also maintaining reliability and economics.

Freeware for GIS and Remote Sensing

Directory of Open Access Journals (Sweden)

Lena Halounová

2007-12-01

Full Text Available Education in remote sensing and GIS is based on software utilization. The software needs to be installed in computer rooms with a certain number of licenses. The commercial software equipment is therefore financially demanding and not only for universities, but especially for students. Internet research brings a long list of free software of various capabilities. The paper shows a present state of GIS, image processing and remote sensing free software.

Role of remote sensing, geographical information system (GIS) and bioinformatics in kala-azar epidemiology.

Science.gov (United States)

Bhunia, Gouri Sankar; Dikhit, Manas Ranjan; Kesari, Shreekant; Sahoo, Ganesh Chandra; Das, Pradeep

2011-11-01

Visceral leishmaniasis or kala-azar is a potent parasitic infection causing death of thousands of people each year. Medicinal compounds currently available for the treatment of kala-azar have serious side effects and decreased efficacy owing to the emergence of resistant strains. The type of immune reaction is also to be considered in patients infected with Leishmania donovani (L. donovani). For complete eradication of this disease, a high level modern research is currently being applied both at the molecular level as well as at the field level. The computational approaches like remote sensing, geographical information system (GIS) and bioinformatics are the key resources for the detection and distribution of vectors, patterns, ecological and environmental factors and genomic and proteomic analysis. Novel approaches like GIS and bioinformatics have been more appropriately utilized in determining the cause of visearal leishmaniasis and in designing strategies for preventing the disease from spreading from one region to another.

The Virtual Learning Commons: Supporting Science Education with Emerging Technologies

Science.gov (United States)

Pennington, D. D.; Gandara, A.; Gris, I.

2012-12-01

The Virtual Learning Commons (VLC), funded by the National Science Foundation Office of Cyberinfrastructure CI-Team Program, is a combination of Semantic Web, mash up, and social networking tools that supports knowledge sharing and innovation across scientific disciplines in research and education communities and networks. The explosion of scientific resources (data, models, algorithms, tools, and cyberinfrastructure) challenges the ability of educators to be aware of resources that might be relevant to their classes. Even when aware, it can be difficult to understand enough about those resources to develop classroom materials. Often emerging data and technologies have little documentation, especially about their application. The VLC tackles this challenge by providing mechanisms for individuals and groups of educators to organize Web resources into virtual collections, and engage each other around those collections in order to a) learn about potentially relevant resources that are available; b) design classes that leverage those resources; and c) develop course syllabi. The VLC integrates Semantic Web functionality for structuring distributed information, mash up functionality for retrieving and displaying information, and social media for discussing/rating information. We are working to provide three views of information that support educators in different ways: 1. Innovation Marketplace: supports users as they find others teaching similar courses, where they are located, and who they collaborate with; 2. Conceptual Mapper: supports educators as they organize their thinking about the content of their class and related classes taught by others; 3. Curriculum Designer: supports educators as they generate a syllabus and find Web resources that are relevant. This presentation will discuss the innovation and learning theories that have informed design of the VLC, hypotheses about the use of emerging technologies to support innovation in classrooms, and will include a

Integrating GIS and ABM to Explore Spatiotemporal Dynamics

Science.gov (United States)

Sun, M.; Jiang, Y.; Yang, C.

2013-12-01

Agent-based modeling as a methodology for the bottom-up exploration with the account of adaptive behavior and heterogeneity of system components can help discover the development and pattern of the complex social and environmental system. However, ABM is a computationally intensive process especially when the number of system components becomes large and the agent-agent/agent-environmental interaction is modeled very complex. Most of traditional ABM frameworks developed based on CPU do not have a satisfying computing capacity. To address the problem and as the emergence of advanced techniques, GPU computing with CUDA can provide powerful parallel structure to enable the complex simulation of spatiotemporal dynamics. In this study, we first develop a GPU-based ABM system. Secondly, in order to visualize the dynamics generated from the movement of agent and the change of agent/environmental attributes during the simulation, we integrate GIS into the ABM system. Advanced geovisualization technologies can be utilized for representing the spatiotemporal change events, such as proper 2D/3D maps with state-of-the-art symbols, space-time cube and multiple layers each of which presents pattern in one time-stamp, etc. Thirdly, visual analytics which include interactive tools (e.g. grouping, filtering, linking, etc.) is included in our ABM-GIS system to help users conduct real-time data exploration during the progress of simulation. Analysis like flow analysis and spatial cluster analysis can be integrated according to the geographical problem we want to explore.

Paper-Based GIS: A Practical Answer to the Implementation of GIS Education into Resource-Poor Schools in South Africa

Science.gov (United States)

Breetzke, Gregory; Eksteen, Sanet; Pretorius, Erika

2011-01-01

Geographical information systems (GIS) were phased into the geography curriculum of South African schools from 2006-2008 as part of the National Curriculum Statement (NCS) for grades 10-12. Since its introduction, GIS education in schools across the country has been met with a number of challenges including the cost of purchasing the hardware and…

Applications of Mobile GIS in Forestry South Australia

Directory of Open Access Journals (Sweden)

D. T. Battad

2012-07-01

Full Text Available South Australian Forestry Corporation (ForestrySA had been actively investigating the applications of mobile GIS in forestry for the past few years. The main objective is to develop an integrated mobile GIS capability that allows staff to collect new spatial information, verify existing data, and remotely access and post data from the field. Two (2 prototype mobile GIS applications have been developed already using the Environmental Systems Research Institute (ESRI ARCGISR technology as the main spatial component. These prototype systems are the Forest Health Surveillance System and the Mobile GIS for Wetlands System. The Forest Health Surveillance System prototype is used primarily for aerial forest health surveillance. It was developed using a tablet PC with ArcMapR GIS. A customised toolbar was developed using ArcObjectsR in the Visual Basic 6 Integrated Development Environment (IDE. The resulting dynamic linked library provides a suite of custom tools which enables the following: - quickly create spatial features and attribute the data - full utilisation of global positioning system (GPS technology - excellent screen display navigation tools, i.e. pan, rotate map, capture of flight path - seamless integration of data into GIS as geodatabase (GDB feature classes - screen entry of text and conversion to annotation feature classes The Mobile GIS for Wetlands System prototype was developed for verifying existing wetland areas within ForestrySA’s plantation estate, collect new wetland data, and record wetland conditions. Mapping of actual wetlands within ForestrySA’s plantation estate is very critical because of the need to establish protection buffers around these features during the implementation of plantation operations. System development has been focussed on a mobile phone platform (HTC HD2R with WindowsR Mobile 6, ESRI’s ArcGISR Mobile software development kit (SDK employing ArcObjectsR written on C#.NET IDE, and ArcGIS Server

Rapid post-earthquake modelling of coseismic landslide intensity and distribution for emergency response decision support

Directory of Open Access Journals (Sweden)

T. R. Robinson

2017-09-01

Full Text Available Current methods to identify coseismic landslides immediately after an earthquake using optical imagery are too slow to effectively inform emergency response activities. Issues with cloud cover, data collection and processing, and manual landslide identification mean even the most rapid mapping exercises are often incomplete when the emergency response ends. In this study, we demonstrate how traditional empirical methods for modelling the total distribution and relative intensity (in terms of point density of coseismic landsliding can be successfully undertaken in the hours and days immediately after an earthquake, allowing the results to effectively inform stakeholders during the response. The method uses fuzzy logic in a GIS (Geographic Information Systems to quickly assess and identify the location-specific relationships between predisposing factors and landslide occurrence during the earthquake, based on small initial samples of identified landslides. We show that this approach can accurately model both the spatial pattern and the number density of landsliding from the event based on just several hundred mapped landslides, provided they have sufficiently wide spatial coverage, improving upon previous methods. This suggests that systematic high-fidelity mapping of landslides following an earthquake is not necessary for informing rapid modelling attempts. Instead, mapping should focus on rapid sampling from the entire affected area to generate results that can inform the modelling. This method is therefore suited to conditions in which imagery is affected by partial cloud cover or in which the total number of landslides is so large that mapping requires significant time to complete. The method therefore has the potential to provide a quick assessment of landslide hazard after an earthquake and may therefore inform emergency operations more effectively compared to current practice.

Un ente innovativo di ricerca e di servizi per la informazione geospaziale: GIS Research Center della Feng-Chia University di Taiwan (GIS.FCU

Directory of Open Access Journals (Sweden)

Mauro Salvemini

2012-04-01

Full Text Available La storia di un Laboratorio GIS a Taiwan nato da un accordo tra Feng-Chia University e la Università di Roma “LaSapienza” oggi tra i primi nel mondo nel settore dell’informazione geospaziale per la ricerca nell’ambito dei testdell’interoperabilità. A body of research and innovative services for geospatial infor-mation: GIS Research Center of Feng-Chia University in Taiwan (GIS.FCU The story of a GIS laboratory in Taiwan born on an agreement between the Feng-Chia University and the University of Rome "La Sapienza" now among the first in the world in the field of information for research for geospatial application.

Application of a GIS-BIOLOCO tool for the design and assessment of biomass delivery chains

NARCIS (Netherlands)

Geijzendorffer, I.R.; Annevelink, E.; Elbersen, B.S.; Smidt, R.A.; Mol, de R.M.

2008-01-01

The spatial fragmentation of different biomass sources in one or more regions makes design and assessment of sustainable biomass delivery chains rather complicated. This paper presents a GIS tool that supports the design and facilitates a sustainability assessment of biomass delivery chains at a

An integrated GIS-MARKAL toolbox for designing a CO2 infrastructure network in the Netherlands

NARCIS (Netherlands)

van den Broek, M.A.; Brederode, E.; Ramirez, C.A.; Kramers, K.; van der Kuip, M.; Wildenborg, T.; Faaij, A.P.C.; Turkenburg, W.C.

2009-01-01

Large-scale implementation of carbon capture and storage needs a whole new infrastructure to transport and store CO2. Tools that can support planning and designing of such infrastructure require incorporation of both temporal and spatial aspects. Therefore, a toolbox that integrates ArcGIS, a

Using SCM and SCOR in managing GIS products

CSIR Research Space (South Africa)

Schmitz, Peter MU

2006-02-01

Full Text Available This is a concept poster which examines the use of supply chain management in planning and managing large or data-intensive Geographic Information System (GIS) projects. Current management models in GIS are either on an organisational or a project...

GIS plays key role in NYC Rescue and Relief Operation

Science.gov (United States)

Showstack, Randy

New York City, Sept. 17—The posters of missing loved ones are pasted onto New York City walls and street signs six days after 2 hijacked commercial airlines destroyed the World Trade Center in lower Manhattan on September 11. Several miles uptown from “ground zero,” heightened security hovers around the city's Office of Emergency Management rescue and relief command center, an around-the-clock operation. Police, firefighters, military, officials with the Federal Emergency Management Agency, communications technicians, and a beehive of others work in controlled chaos in this cavernous, convention center-sized hall, lined with computers and adorned with several American flags.After the original command center at 7 World Trade Center collapsed to rubble as an after-effect of the plane strikes, city officials scrambled to recreate it. Alan Leidner, director of New York's citywide geographic information systems (GIS), and who is with the Department of Information Technology and Telecommunications, knew that maps would be an integral component of the rescue and relief efforts. Maps provide emergency workers and others with accurate and detailed scientific data in the form of visual aids upon which they can make informed decisions.

Expert system technology to support emergency response: its prospects and limitations

International Nuclear Information System (INIS)

Belardo, S.; Wallace, W.A.

1988-01-01

The capabilities for computer technologies to provide decision support in emergency response are now well recognized. The information flow prior to, during, and after potentially catastrophic events must be managed in order to have effective response. We feel strongly that computer technology can be a crucial component in this management process. We will first review a relatively new facet of computer technology - expert systems. We will then provide a conceptual framework for decision making under crisis, a situation typified by emergency response. We follow with a discussion of a prototype expert system for response to an accident at a nuclear power generation facility. Our final section discusses the potential advantages and limitations of expert system technology in emergency response. (author)

Smart caching based on mobile agent of power WebGIS platform.

Science.gov (United States)

Wang, Xiaohui; Wu, Kehe; Chen, Fei

2013-01-01

Power information construction is developing towards intensive, platform, distributed direction with the expansion of power grid and improvement of information technology. In order to meet the trend, power WebGIS was designed and developed. In this paper, we first discuss the architecture and functionality of power WebGIS, and then we study caching technology in detail, which contains dynamic display cache model, caching structure based on mobile agent, and cache data model. We have designed experiments of different data capacity to contrast performance between WebGIS with the proposed caching model and traditional WebGIS. The experimental results showed that, with the same hardware environment, the response time of WebGIS with and without caching model increased as data capacity growing, while the larger the data was, the higher the performance of WebGIS with proposed caching model improved.

Decision support for water quality management of contaminants of emerging concern.

Science.gov (United States)

Fischer, Astrid; Ter Laak, Thomas; Bronders, Jan; Desmet, Nele; Christoffels, Ekkehard; van Wezel, Annemarie; van der Hoek, Jan Peter

2017-05-15

Water authorities and drinking water companies are challenged with the question if, where and how to abate contaminants of emerging concern in the urban water cycle. The most effective strategy under given conditions is often unclear to these stakeholders as it requires insight into several aspects of the contaminants such as sources, properties, and mitigation options. Furthermore the various parties in the urban water cycle are not always aware of each other's requirements and priorities. Processes to set priorities and come to agreements are lacking, hampering the articulation and implementation of possible solutions. To support decision makers with this task, a decision support system was developed to serve as a point of departure for getting the relevant stakeholders together and finding common ground. The decision support system was iteratively developed in stages. Stakeholders were interviewed and a decision support system prototype developed. Subsequently, this prototype was evaluated by the stakeholders and adjusted accordingly. The iterative process lead to a final system focused on the management of contaminants of emerging concern within the urban water cycle, from wastewater, surface water and groundwater to drinking water, that suggests mitigation methods beyond technical solutions. Possible wastewater and drinking water treatment techniques in combination with decentralised and non-technical methods were taken into account in an integrated way. The system contains background information on contaminants of emerging concern such as physical/chemical characteristics, toxicity and legislative frameworks, water cycle entrance pathways and a database with associated possible mitigation methods. Monitoring data can be uploaded to assess environmental and human health risks in a specific water system. The developed system was received with great interest by potential users, and implemented in an international water cycle network. Copyright © 2017 Elsevier

Application of GIS Technology - cadastral base of the municipality of Gostivar

OpenAIRE

Serafimoski, Toni

2011-01-01

In the thesis is presented modern GIS technology and its application in the field of cadastre. GIS technology is essentially based on the display and information processing related to given geographical coordinates. In the paper is implemented GIS software package Microstation, widely applied in the field of cadastre. The paper developed model using data from the cadastre of the municipality of Gostivar. Applied GIS technology opens up wide possibilities of processing of cadastral data,...

Near Real-time Scientific Data Analysis and Visualization with the ArcGIS Platform

Science.gov (United States)

Shrestha, S. R.; Viswambharan, V.; Doshi, A.

2017-12-01

Scientific multidimensional data are generated from a variety of sources and platforms. These datasets are mostly produced by earth observation and/or modeling systems. Agencies like NASA, NOAA, USGS, and ESA produce large volumes of near real-time observation, forecast, and historical data that drives fundamental research and its applications in larger aspects of humanity from basic decision making to disaster response. A common big data challenge for organizations working with multidimensional scientific data and imagery collections is the time and resources required to manage and process such large volumes and varieties of data. The challenge of adopting data driven real-time visualization and analysis, as well as the need to share these large datasets, workflows, and information products to wider and more diverse communities, brings an opportunity to use the ArcGIS platform to handle such demand. In recent years, a significant effort has put in expanding the capabilities of ArcGIS to support multidimensional scientific data across the platform. New capabilities in ArcGIS to support scientific data management, processing, and analysis as well as creating information products from large volumes of data using the image server technology are becoming widely used in earth science and across other domains. We will discuss and share the challenges associated with big data by the geospatial science community and how we have addressed these challenges in the ArcGIS platform. We will share few use cases, such as NOAA High Resolution Refresh Radar (HRRR) data, that demonstrate how we access large collections of near real-time data (that are stored on-premise or on the cloud), disseminate them dynamically, process and analyze them on-the-fly, and serve them to a variety of geospatial applications. We will also share how on-the-fly processing using raster functions capabilities, can be extended to create persisted data and information products using raster analytics

The advanced control board summary and adaptation of the emergency operation support system

International Nuclear Information System (INIS)

Yamada, Yusuke; Mashio, Kenji

2009-01-01

In an attempt to further improve both reliability and operability of Pressurized Water Reactors (PWRs), the advanced main control board and the Emergency Operation Support System (EOSS), which assists operators to monitor and make judgments during an emergency situation, have been developed. In this paper, the advanced control board summary and functions of the EOSS are described. (author)

A GIS Approach to Identifying Socially and Medically Vulnerable Older Adult Populations in South Florida.

Science.gov (United States)

Hames, Elizabeth; Stoler, Justin; Emrich, Christopher T; Tewary, Sweta; Pandya, Naushira

2017-11-10

We define, map, and analyze geodemographic patterns of socially and medically vulnerable older adults within the tri-county region of South Florida. We apply principal components analysis (PCA) to a set of previously identified indicators of social and medical vulnerability at the census tract level. We create and map age-stratified vulnerability scores using a geographic information system (GIS), and use spatial analysis techniques to identify patterns and interactions between social and medical vulnerability. Key factors contributing to social vulnerability in areas with higher numbers of older adults include age, large household size, and Hispanic ethnicity. Medical vulnerability in these same areas is driven by disease burden, access to emergency cardiac services, availability of nursing home and hospice beds, access to home health care, and available mental health services. Age-dependent areas of social vulnerability emerge in Broward County, whereas age-dependent areas of medical vulnerability emerge in Palm Beach County. Older-adult social and medical vulnerability interact differently throughout the study area. Spatial analysis of older adult social and medical vulnerability using PCA and GIS can help identify age-dependent pockets of vulnerability that are not easily identifiable in a populationwide analysis; improve our understanding of the dynamic spatial organization of health care, health care needs, access to care, and outcomes; and ultimately serve as a tool for health care planning. © The Author 2016. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Energia dal mare: modelli numerici e GIS per la valutazione del potenziale energetico

Directory of Open Access Journals (Sweden)

Emanela Caiaffa

2012-04-01

Full Text Available Attraverso l’uso di modelli numerici oceanografici applicati al Mar Mediterraneo i ricercatori del laboratoriodi modellistica climatica e impatti dell’ENEA stanno valutando il potenziale energetico contenuto nel motoondoso lungo la fascia costiera e più in generale nei mari italiani, allo scopo di identificare i siti più idoneiall’installazione di impianti di conversione del moto ondoso in energia elettrica. Energy from the sea: numerical models and GIS for the evaluation of potential production Marine renewable energy is an emerging sector with great potential to contribute in achieving European renewable energy and decarbonisation targets. Marine renewable energy is here defined to include both wave and tidal current energy. With a diverse set of technologies in development and policy support mechanisms introduced in a number of European countries, the sector is working towards achieving commercial deployments in the near future. The present paper after a short and simple description of the WAve prediction Model (WAM, a numerical wave model to assess the wave potential energy in the Mediterranean basin, describes the potential advantages in in-tegrating the numerical results in a GIS (Geographic Information System containing environmental  and  territorial  data.  The  analysis  of  multiple  layers  of  geo-referenced information allows to explore the spatial relationship between the wave energy poten-tial and other variables such as the location of protected areas or navigational routes. This kind of analysis helps identifying the most suitable areas for the the installation of wave energy converters. As an example, in order to better highlight the results along the Italian coast, the values of the potential energy, extracted along the coast (about 12 km from the coast, have been included in a series of thematic maps.

Energia dal mare: modelli numerici e GIS per la valutazione del potenziale energetico

Directory of Open Access Journals (Sweden)

Emanela Caiaffa

2012-04-01

Full Text Available Attraverso l’uso di modelli numerici oceanografici applicati al Mar Mediterraneo i ricercatori del laboratoriodi modellistica climatica e impatti dell’ENEA stanno valutando il potenziale energetico contenuto nel motoondoso lungo la fascia costiera e più in generale nei mari italiani, allo scopo di identificare i siti più idoneiall’installazione di impianti di conversione del moto ondoso in energia elettrica.   Energy from the sea: numerical models and GIS for the evaluation of potential production Marine renewable energy is an emerging sector with great potential to contribute in achieving European renewable energy and decarbonisation targets. Marine renewable energy is here defined to include both wave and tidal current energy. With a diverse set of technologies in development and policy support mechanisms introduced in a number of European countries, the sector is working towards achieving commercial deployments in the near future. The present paper after a short and simple description of the WAve prediction Model (WAM, a numerical wave model to assess the wave potential energy in the Mediterranean basin, describes the potential advantages in in-tegrating the numerical results in a GIS (Geographic Information System containing environmental  and  territorial  data.  The  analysis  of  multiple  layers  of  geo-referenced information allows to explore the spatial relationship between the wave energy poten-tial and other variables such as the location of protected areas or navigational routes. This kind of analysis helps identifying the most suitable areas for the the installation of wave energy converters. As an example, in order to better highlight the results along the Italian coast, the values of the potential energy, extracted along the coast (about 12 km from the coast, have been included in a series of thematic maps.

Tactical emergency medical support programs: a comprehensive statewide survey.

Science.gov (United States)

Bozeman, William P; Morel, Benjamin M; Black, Timothy D; Winslow, James E

2012-01-01

Specially trained tactical emergency medical support (TEMS) personnel provide support to law enforcement special weapons and tactics (SWAT) teams. These programs benefit law enforcement agencies, officers, suspects, and citizens. TEMS programs are increasingly popular, but there are wide variations in their organization and operation and no recent data on their prevalence. We sought to measure the current prevalence and specific characteristics of TEMS programs in a comprehensive fashion in a single southeastern state. North Carolina emergency medical services (EMS) systems have county-based central EMS oversight; each system was surveyed by phone and e-mail. The presence and selected characteristics of TEMS programs were recorded. U.S. Census data were used to measure the population impact of the programs. All of the 101 EMS systems statewide were successfully contacted. Thirty-three counties (33%) have TEMS programs providing medical support to 56 local law enforcement agencies as well as state and federal agencies. TEMS programs tend to be located in more populated urban and suburban areas, serving a population base of 5.9 million people, or 64% of the state's population. Tactical medics in the majority of these programs (29/33; 88%) are not sworn law enforcement officers. Approximately one-third of county-based EMS systems in North Carolina have TEMS programs. These programs serve almost two-thirds of the state's population base, using primarily nonsworn tactical medics. Comparison with other regions of the country will be useful to demonstrate differences in prevalence and program characteristics. Serial surveillance will help track trends and measure the growth and impact of this growing subspecialty field.

Integration agent-based models and GIS as a virtual urban dynamic laboratory

Science.gov (United States)

Chen, Peng; Liu, Miaolong

2007-06-01

Based on the Agent-based Model and spatial data model, a tight-coupling integrating method of GIS and Agent-based Model (ABM) is to be discussed in this paper. The use of object-orientation for both spatial data and spatial process models facilitates their integration, which can allow exploration and explanation of spatial-temporal phenomena such as urban dynamic. In order to better understand how tight coupling might proceed and to evaluate the possible functional and efficiency gains from such a tight coupling, the agent-based model and spatial data model are discussed, and then the relationships affecting spatial data model and agent-based process models interaction. After that, a realistic crowd flow simulation experiment is presented. Using some tools provided by general GIS systems and a few specific programming languages, a new software system integrating GIS and MAS as a virtual laboratory applicable for simulating pedestrian flows in a crowd activity centre has been developed successfully. Under the environment supported by the software system, as an applicable case, a dynamic evolution process of the pedestrian's flows (dispersed process for the spectators) in a crowds' activity center - The Shanghai Stadium has been simulated successfully. At the end of the paper, some new research problems have been pointed out for the future.

Ground subsidence information as a valuable layer in GIS analysis

Directory of Open Access Journals (Sweden)

Murdzek Radosław

2018-01-01

Full Text Available Among the technologies used to improve functioning of local governments the geographic information systems (GIS are widely used. GIS tools allow to simultaneously integrate spatial data resources, analyse them, process and use them to make strategic decisions. Nowadays GIS analysis is widely used in spatial planning or environmental protection. In these applications a number of spatial information are utilized, but rarely it is an information about environmental hazards. This paper includes information about ground subsidence that occurred in USCB mining area into GIS analysis. Monitoring of this phenomenon can be carried out using the radar differential interferometry (DInSAR method.

Ground subsidence information as a valuable layer in GIS analysis

Science.gov (United States)

Murdzek, Radosław; Malik, Hubert; Leśniak, Andrzej

2018-04-01

Among the technologies used to improve functioning of local governments the geographic information systems (GIS) are widely used. GIS tools allow to simultaneously integrate spatial data resources, analyse them, process and use them to make strategic decisions. Nowadays GIS analysis is widely used in spatial planning or environmental protection. In these applications a number of spatial information are utilized, but rarely it is an information about environmental hazards. This paper includes information about ground subsidence that occurred in USCB mining area into GIS analysis. Monitoring of this phenomenon can be carried out using the radar differential interferometry (DInSAR) method.

The analysis on demand-driven GIS talent education modes in China colleges

Science.gov (United States)

Yang, Liangjie; Mou, Naixia; Yang, Shuwen

2006-10-01

GIS is an application-driven and technology-guided specialty and it has become an important part of informational technology industry. The purpose of GIS talent education is to provide the talented person (theory-oriented and technique-oriented) for the digital society. So it is obviously market-driven. The multi-level, diversification and socialization of GIS application need multi-objective, multi-gradient and large-scale GIS talent education. The college is the dominating education department in China. So the college education modes have a strong impact on the quality of GIS talents. The curriculum design embodies intrinsic request of education goals and modes. So it should be flexible, diverse and multi-level in order to achieve the established goals. In this paper, we analyze the present situation of GIS education both home and abroad, find out the problems and their corresponding reasons of China GIS education, then put forward three goals of domestic GIS education and five education modes ("3+5" education modes). At last, we argue the basic frame of the curriculum design.

HUD GIS Boundary Files

Data.gov (United States)

Department of Housing and Urban Development — The HUD GIS Boundary Files are intended to supplement boundary files available from the U.S. Census Bureau. The files are for community planners interested in...

Development of emergency operator support system for next Japanese PWR plants

International Nuclear Information System (INIS)

Ito, K.; Hanada, S.; Yoshida, Y.; Sugino, K.

2006-01-01

The purpose of main control room improvement is to reduce operator workload and potential human errors by offering a better working environment where operators can maximize their abilities. Japanese PWR utilities and Mitsubishi have developed an operator support system entitled Emergency Operator Support System (EOSS). The system supports operators in incidental/accidental situations which may be worsened by human errors. In order to confirm the validity of the system, a proto type was built, and was evaluated by operator crews. The consequence showed good result of effectiveness in avoiding potential human errors and decreasing workload of operators. (authors)

Ecological user interface for emergency management decision support systems

DEFF Research Database (Denmark)

Andersen, V.

2003-01-01

The user interface for decision support systems is normally structured for presenting relevant data for the skilled user in order to allow fast assessment and action of the hazardous situation, or for more complex situations to present the relevant rules and procedures to be followed in order to ...... of this paper is to discuss the possibility of using the same principles for emergency management with the aim of improved performance in complex and unanticipated situations....

Application of gis - technology for modelling motion water in the open channels

OpenAIRE

Venherskyi, Petro; Kokovska, Yaryna

2012-01-01

In this paper technology that would be allowed to use ArcGIS-Extension, that is GIS-components for Webapplications based on ArcGIS Server'a. Such technologies provide simple and easy integration and use of GIS-component on the WEB-site, where a separate layer provided opportunities modeling and solving applied problems of moving water flow in rivers.

From BIM to GIS at the Smithsonian Institution

Science.gov (United States)

Günther-Diringer, Detlef

2018-05-01

BIM-files (Building Information Models) are in modern architecture and building management a basic prerequisite for successful creation of construction engineering projects. At the facilities department of the Smithsonian Institution more than six hundred buildings were maintained. All facilities were digital available in an ESRI ArcGIS-environment with connection to the database information about single rooms with the usage and further maintenance information. These data are organization wide available by an intranet viewer, but only in a two-dimensional representation. Goal of the carried out project was the development of a workflow from available BIM-models to the given GIS-structure. The test-environment were the BIM-models of the buildings of the Smithsonian museums along the Washington Mall. Based on new software editions of Autodesk Revit, FME and ArcGIS Pro the workflow from BIM to the GIS-data structure of the Smithsonian was successfully developed and may be applied for the setup of the future 3D intranet viewer.

The GIS and data solution for advanced business analysis

Directory of Open Access Journals (Sweden)

Carmen RADUT

2009-12-01

Full Text Available The GIS Business Analyst is a suite of Geographic Information System (GIS-enabled tools, wizards, and data that provides business professionals with a complete solution for site evaluation, selective customer profiling, and trade area market analysis. Running simple reports, mapping the results, and performing complex probability models are among the capabilities The GIS Business Analyst offers in one affordable desktop analysis solution. Data and analyses produced by The GIS Business Analyst can be shared across departments, reducing redundant research and marketing efforts, speeding analysis of results, and increasing employee efficiency. The GIS Business Analyst is the first suite of tools for unlocking the intelligence of geography, demographic, consumer lifestyle, and business data. It is a valuable asset for business decision making such as analyzing market share and competition, determining new site expansions or reductions, and targeting new customers. The ability to analyze and visualize the geographic component of business data reveals trends, patterns, and opportunities hidden in tabular data. By combining information, such as sales data of the organization, customer information, and competitor locations, with geographic data, such as demographics, territories, or store locations, the GIS Business Analyst helps the user better understand organization market, organization customers, and organization competition. The business intelligence systems bring geographic information systems, marketing analysis tools, and demographic data products together to offer the user powerful ways to compete in today's business strategies.

Quantarctica: A Unique, Open, Standalone GIS Package for Antarctic Research and Education

Science.gov (United States)

Roth, George; Matsuoka, Kenichi; Skoglund, Anders; Melvær, Yngve; Tronstad, Stein

2017-04-01

The Norwegian Polar Institute has developed Quantarctica (http://quantarctica.npolar.no), an open GIS package for use by the international Antarctic community. Quantarctica includes a wide range of cartographic basemap layers, geophysical and glaciological datasets, and satellite imagery in standardized open file formats with a consistent Antarctic map projection and customized layer and labeling styles for quick, effective cartography. Quantarctica's strengths as an open science platform lie in 1) The complete, ready-to-use data package which includes full-resolution, original-quality vector and raster data, 2) A policy for freely-redistributable and modifiable data including all metadata and citations, and 3) QGIS, a free, full-featured, modular, offline-capable open-source GIS suite with a rapid and active development and support community. The Quantarctica team is actively incorporating more up-to-date, peer-reviewed, freely distributable pan-Antarctic geospatial datasets for the next version release in 2017. As part of this ongoing development, we are investigating the best approaches for quickly and seamlessly distributing new and updated data to users, storing datasets in efficient, open file formats while maintaining full data integrity, and coexisting with numerous online data portals in a way that most actively benefits the Antarctic community. A recent survey of Quantarctica users showed broad geographical adoption among Antarctic Treaty countries, including those outside the large US and UK Antarctic programs. Maps and figures produced by Quantarctica have also appeared in open-access journals and outside of the formal scientific community on popular science and GIS blogs. Our experience with the Quantarctica project has shown the tremendous value of education and outreach, not only in promoting open software, data formats, and practices, but in empowering Antarctic science groups to more effectively use GIS and geospatial data. Open practices are

Conceptual design of the national nuclear emergency management information system

International Nuclear Information System (INIS)

Wang Xingyu; Shi Zhongqi

2003-01-01

A Conceptual Design of the National Nuclear Emergency Management Information System was brought forward in this paper, based on the summarization of some emergency management information systems used in China and some other countries. The conceptual system should have four basic characteristics, that are (1) a graphic displaying and querying interface based on GIS (2) data and results shared with the assessment software of nuclear accident (3) a complete set of databases and (4) the capability of on-line data receiving or real-time distributing of the commands and information for emergency response

Geographic Information System (GIS) characterization of benthic and emergent areas in the Intracoastal Waterway, Sarasota County, Florida in 1987 (NODC Accession 0000607)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This GIS layer graphically represents algae, seagrass, tidal marshes, mangroves, and oyster bed coverages found throughout the Intracoastal Waterway in Sarasota...

Exchanging the Context between OGC Geospatial Web clients and GIS applications using Atom

Science.gov (United States)

Maso, Joan; Díaz, Paula; Riverola, Anna; Pons, Xavier

2013-04-01

Currently, the discovery and sharing of geospatial information over the web still presents difficulties. News distribution through website content was simplified by the use of Really Simple Syndication (RSS) and Atom syndication formats. This communication exposes an extension of Atom to redistribute references to geospatial information in a Spatial Data Infrastructure distributed environment. A geospatial client can save the status of an application that involves several OGC services of different kind and direct data and share this status with other users that need the same information and use different client vendor products in an interoperable way. The extensibility of the Atom format was essential to define a format that could be used in RSS enabled web browser, Mass Market map viewers and emerging geospatial enable integrated clients that support Open Geospatial Consortium (OGC) services. Since OWS Context has been designed as an Atom extension, it is possible to see the document in common places where Atom documents are valid. Internet web browsers are able to present the document as a list of items with title, abstract, time, description and downloading features. OWS Context uses GeoRSS so that, the document can be to be interpreted by both Google maps and Bing Maps as items that have the extent represented in a dynamic map. Another way to explode a OWS Context is to develop an XSLT to transform the Atom feed into an HTML5 document that shows the exact status of the client view window that saved the context document. To accomplish so, we use the width and height of the client window, and the extent of the view in world (geographic) coordinates in order to calculate the scale of the map. Then, we can mix elements in world coordinates (such as CF-NetCDF files or GML) with elements in pixel coordinates (such as WMS maps, WMTS tiles and direct SVG content). A smarter map browser application called MiraMon Map Browser is able to write a context document and read

A telemedicine support for improving medical emergency management

Directory of Open Access Journals (Sweden)

Massimo Canonico

2017-12-01

Full Text Available In this paper, we introduce a telemedicine architecture for supporting emergency patient stabilization and patient transportation to a fully equipped health care center. In particular, we focus on the description of a set of mobile apps, designed for supporting data recording and transmission during patient transportation by ambulance. Some of the apps are interfaced to the monitoring devices in the ambulance, and automatically send all the recorded data to a server at the destination center. One additional app enables the travelling personnel to input and transmit further significant patient data, or comments. At the destination center, the specialist physician is allowed to inspect the data as soon as they are received, possibly providing immediate advice. The exploitation of the apps also allows to maintain the transportation data over time, for medico-legal purposes, or to perform a-posteriori analyses. Some first evaluation results are discussed in the paper.

77 FR 69899 - Public Conference on Geographic Information Systems (GIS) in Transportation Safety

Science.gov (United States)

2012-11-21

... NATIONAL TRANSPORTATION SAFETY BOARD Public Conference on Geographic Information Systems (GIS) in... Geographic Information Systems (GIS) in transportation safety on December 4-5, 2012. GIS is a rapidly... visualization of data. The meeting will bring researchers and practitioners in transportation safety and GIS...

Open source GIS for HIV/AIDS management

Directory of Open Access Journals (Sweden)

Ricketts Adam

2008-10-01

Full Text Available Abstract Background Reliable access to basic services can improve a community's resilience to HIV/AIDS. Accordingly, work is being done to upgrade the physical infrastructure in affected areas, often employing a strategy of decentralised service provision. Spatial characteristics are one of the major determinants in implementing services, even in the smaller municipal areas, and good quality spatial information is needed to inform decision making processes. However, limited funds, technical infrastructure and human resource capacity result in little or no access to spatial information for crucial infrastructure development decisions at local level. This research investigated whether it would be possible to develop a GIS for basic infrastructure planning and management at local level. Given the resource constraints of the local government context, particularly in small municipalities, it was decided that open source software should be used for the prototype system. Results The design and development of a prototype system illustrated that it is possible to develop an open source GIS system that can be used within the context of local information management. Usability tests show a high degree of usability for the system, which is important considering the heavy workload and high staff turnover that characterises local government in South Africa. Local infrastructure management stakeholders interviewed in a case study of a South African municipality see the potential for the use of GIS as a communication tool and are generally positive about the use of GIS for these purposes. They note security issues that may arise through the sharing of information, lack of skills and resource constraints as the major barriers to adoption. Conclusion The case study shows that spatial information is an identified need at local level. Open source GIS software can be used to develop a system to provide local-level stakeholders with spatial information. However, the

A new data integration approach for AutoCAD and GIS

Science.gov (United States)

Ye, Hongmei; Li, Yuhong; Wang, Cheng; Li, Lijun

2006-10-01

GIS has its advantages both on spatial data analysis and management, particularly on the geometric and attributive information management, which has also attracted lots attentions among researchers around world. AutoCAD plays more and more important roles as one of the main data sources of GIS. Various work and achievements can be found in the related literature. However, the conventional data integration from AutoCAD to GIS is time-consuming, which also can cause the information loss both in the geometric aspects and the attributive aspects for a large system. It is necessary and urgent to sort out new approach and algorithm for the efficient high-quality data integration. In this paper, a novel data integration approach from AutoCAD to GIS will be introduced based on the spatial data mining technique through the data structure analysis both in the AutoCAD and GIS. A practicable algorithm for the data conversion from CAD to GIS will be given as well. By a designed evaluation scheme, the accuracy of the conversion both in the geometric and the attributive information will be demonstrated. Finally, the validity and feasibility of the new approach will be shown by an experimental analysis.

GIS tools for analyzing accidents and road design: A review

Energy Technology Data Exchange (ETDEWEB)

Satria, R.

2016-07-01

A significant unexpected outcome of transportation systems is road accidents with injuries and loss of lives. In recent years, the number of studies about the tools for analyzing accidents and road design has increased considerably. Among these tools, Geographical Information Systems (GIS) stand out for their ability to perform complex spatial analyses. However, sometimes the GIS, has been used only as a geographical database to store and represent data about accidents and road characteristics. It has also been used to represent the results of statistical studies of accidents but, these statistical studies have not been carried out with GIS. Owing to its integrated statistical-analysis capabilities GIS provides several advantages. First, it allows a more careful and accurate data selection, screening and reduction. Also, it allows a spatial analysis of the results in pre and post-processing. Second, GIS allows the development of spatial statistics that rely on geographically-referenced data. In this paper, several GIS tools used to model accidents have been examined. The understanding of these tools will help the analyst to make a better decision about which tool could be applied in each particular condition and context. (Author)

Crisis Reliability Indicators Supporting Emergency Services (CRISES): A Framework for Developing Performance Measures for Behavioral Health Crisis and Psychiatric Emergency Programs.

Science.gov (United States)

Balfour, Margaret E; Tanner, Kathleen; Jurica, Paul J; Rhoads, Richard; Carson, Chris A

2016-01-01

Crisis and emergency psychiatric services are an integral part of the healthcare system, yet there are no standardized measures for programs providing these services. We developed the Crisis Reliability Indicators Supporting Emergency Services (CRISES) framework to create measures that inform internal performance improvement initiatives and allow comparison across programs. The framework consists of two components-the CRISES domains (timely, safe, accessible, least-restrictive, effective, consumer/family centered, and partnership) and the measures supporting each domain. The CRISES framework provides a foundation for development of standardized measures for the crisis field. This will become increasingly important as pay-for-performance initiatives expand with healthcare reform.

Ground and Helicopter Emergency Medical Services Time Tradeoffs Assessed with Geographic Information.

Science.gov (United States)

Widener, Michael J; Ginsberg, Zac; Schleith, Daniel; Floccare, Douglas J; Hirshon, Jon Mark; Galvagno, Samuel

2015-07-01

We describe how geographic information systems (GIS) can be used to assess and compare estimated transport time for helicopter and ground emergency medical services. Recent research shows that while the odds of a trauma patient's survival increase with helicopter emergency medical services (HEMS), they may not increase to the extent necessary to make HEMS cost effective. This study offers an analytic tool to objectively quantify the patient travel time advantage that HEMS offers compared to ground emergency medical services (GEMS). Using helicopter dispatch data from the Maryland State Police from 2000-2011, we computed transport time estimates for HEMS and GEMS, compare these results to a reference transport time of 60 min, and use geospatial interpolation to extrapolate the total response times for each mode across the study region. Mapping the region's trauma incidents and modeling response times, our findings indicate the GIS framework for calculating transportation time tradeoffs is useful in identifying which areas can be better served by HEMS or GEMS. The use of GIS and the analytical methodology described in this study present a method to compare transportation by air and ground in the prehospital setting that accounts for how mode, distance, and road infrastructure impact total transport time. Whether used to generate regional maps in advance or applied real-time, the presented framework provides a tool to identify earlier incident locations that favor HEMS over GEMS transport modes.

CLOUD BASED WEB 3D GIS TAIWAN PLATFORM

Directory of Open Access Journals (Sweden)

W.-F. Tsai

2012-09-01

Full Text Available This article presents the status of the web 3D GIS platform, which has been developed in the National Applied Research Laboratories. The purpose is to develop a global earth observation 3D GIS platform for applications to disaster monitoring and assessment in Taiwan. For quick response to preliminary and detailed assessment after a natural disaster occurs, the web 3D GIS platform is useful to access, transfer, integrate, display and analyze the multi-scale huge data following the international OGC standard. The framework of cloud service for data warehousing management and efficiency enhancement using VMWare is illustrated in this article.

Adjustment of the problems of landslide GIS data

Science.gov (United States)

Uchiyama, S.; Doshida, S.; Oyagi, N.; Shimizu, F.; Inokuchi, T.

2012-12-01

Information on the distribution of landslides is a basic type of data used by countries for disaster prevention. Since 1972, 1:50,000 landslide maps have been produced at the Japanese National Research Institute for Earth Science and Disaster Prevention. From October 2000, the institute has been producing landslide GIS data and transmitting these data over the web. The area that has been published so far covers over 80% of Japan. Presently, the number of diagrams printed are 980 (March 2012). In addition, 350,000 landslide GIS data graphs have been digitized with the same diagrams as a base. Twelve years have passed since this GIS data acquisition program was launched, and in that time, several problems have been identified. These problems are listed below. 1) Scarps do not become polygonized. 2) Landslides which extend over the boundaries of the printed graphs are divided into separate elements. 3) When the time taken to read and interpret the landslide data differs, the shape of the landslides can vary between diagrams. 4) There have been cases of inaccurate positions and shapes in landslide GIS data produced since 2005. 5) Obvious mistakes are present in the attribute data. The causes of such problems are as follows: 1) Lack of technical examination at the time of the start of the production of the landslide GIS data. 2) Limitations of the landslide GIS data editing systems which were developed separately. 3) Program bugs which occur during the conversion of information input to an individual editing system into general-purpose GIS data. 4) Problems which arise during the process of the production of landslide GIS data. This project at the National Research Institute for Earth Science and Disaster Prevention is planned to be completed in 2013. By the end of the project, we hope to present a catalogue of all identified problems and formulate a plan to resolve them, and pass them on to the next generation.; Problems: For the diagram, scarps are presented by

Providing open-access online materials and hands-on sessions for GIS exercises

Science.gov (United States)

Oguchi, T.; Yamauchi, H.; Hayakawa, Y. S.

2017-12-01

Researchers of GIS (Geographical Information Systems/Sciences) in Japan have collaborated to provide materials for GIS lecture classes in universities for the last 20 years. The major outcomes include 1) a GIS core curriculum, 2) a GIS "body of knowledge" explaining the details of the curriculum, 3) a series of PowerPoint presentations, and 4) a comprehensive GIS textbook. However, materials for GIS exercises at university classes using GIS software have been limited in Japan. Therefore, we launched a project to provide such materials which will be available online and accessible by anybody. The materials cover broad basic aspects of GIS including geoscientific applications such as terrain analysis using digital elevation models. The materials utilize public-domain and open-source software packages such as QGIS and GRASS. The data used are also freely available ones such as those from the Geospatial Information Authority of Japan. The use of the GitHub platform to distribute the materials allow easier online interactions by both material producers and users. Selected sets of the materials have been utilized for hands-on activities including both official university classes and public instructions. We have been updating the materials based on the opinions of people who took the hands-on courses for better GIS education. The current materials are in Japanese, but we plan to translate some of them into English.

WebGIS based on semantic grid model and web services

Science.gov (United States)

Zhang, WangFei; Yue, CaiRong; Gao, JianGuo

2009-10-01

As the combination point of the network technology and GIS technology, WebGIS has got the fast development in recent years. With the restriction of Web and the characteristics of GIS, traditional WebGIS has some prominent problems existing in development. For example, it can't accomplish the interoperability of heterogeneous spatial databases; it can't accomplish the data access of cross-platform. With the appearance of Web Service and Grid technology, there appeared great change in field of WebGIS. Web Service provided an interface which can give information of different site the ability of data sharing and inter communication. The goal of Grid technology was to make the internet to a large and super computer, with this computer we can efficiently implement the overall sharing of computing resources, storage resource, data resource, information resource, knowledge resources and experts resources. But to WebGIS, we only implement the physically connection of data and information and these is far from the enough. Because of the different understanding of the world, following different professional regulations, different policies and different habits, the experts in different field will get different end when they observed the same geographic phenomenon and the semantic heterogeneity produced. Since these there are large differences to the same concept in different field. If we use the WebGIS without considering of the semantic heterogeneity, we will answer the questions users proposed wrongly or we can't answer the questions users proposed. To solve this problem, this paper put forward and experienced an effective method of combing semantic grid and Web Services technology to develop WebGIS. In this paper, we studied the method to construct ontology and the method to combine Grid technology and Web Services and with the detailed analysis of computing characteristics and application model in the distribution of data, we designed the WebGIS query system driven by

Advanced GIS Exercise: Performing Error Analysis in ArcGIS ModelBuilder

Science.gov (United States)

Hall, Steven T.; Post, Christopher J.

2009-01-01

Knowledge of Geographic Information Systems is quickly becoming an integral part of the natural resource professionals' skill set. With the growing need of professionals with these skills, we created an advanced geographic information systems (GIS) exercise for students at Clemson University to introduce them to the concept of error analysis,…

FROM EXCAVATIONS TO WEB: A GIS FOR ARCHAEOLOGY

Directory of Open Access Journals (Sweden)

M. G. D'Urso

2017-05-01

Full Text Available The study and the protection of Cultural Heritage in recent years have undergone a revolution about the search tools and the reference disciplines. The technological approach to the problem of the collection, organization and publication of archaeological data using GIS software has completely changed the essence of the traditional methods of investigation, paving the way to the development of several application areas, up to the Cultural Resource Management. A relatively recent specific sector of development for archaeological GIS development sector is dedicated to the intra - site analyses aimed to recording, processing and display information obtained during the excavations. The case - study of the archaeological site located in the south - east of San Pietro Vetere plateau in Aquino, in the Southern Lazio, is concerned with the illustration of a procedure describing the complete digital workflow relative to an intra-site analysis of an archaeological dig. The GIS project implementation and its publication on the web, thanks to several softwares, particularly the FOSS (Free Open Source Software Quantum - GIS, are an opportunity to reflect on the strengths and the critical nature of this particular application of the GIS technology. For future developments in research it is of fundamental importance the identification of a digital protocol for processing of excavations (from the acquisition, cataloguing, up data insertion, also on account of a possible future Open Project on medieval Aquino.

Radiological emergency assessment of local decision support system

International Nuclear Information System (INIS)

Breznik, B.; Kusar, A.; Boznar, M.Z.; Mlakar, P.

2003-01-01

Local decision support system has been developed based on the needs of Krsko Nuclear Power Plant for quick dose projection and it is one of important features required for proposal of intervention before actual release may occur. Radiological emergency assessment in the case of nuclear accident is based on plant status analysis, radiation monitoring data and on prediction of release of radioactive sources to the environment. There are possibilities to use automatic features to predict release source term and manual options for selection of release parameters. Advanced environmental modelling is used for assessment of atmospheric dispersion of radioactive contamination in the environment. (author)

The FOSS GIS Workbench on the GFZ Load Sharing Facility compute cluster

Science.gov (United States)

Löwe, P.; Klump, J.; Thaler, J.

2012-04-01

Compute clusters can be used as GIS workbenches, their wealth of resources allow us to take on geocomputation tasks which exceed the limitations of smaller systems. To harness these capabilities requires a Geographic Information System (GIS), able to utilize the available cluster configuration/architecture and a sufficient degree of user friendliness to allow for wide application. In this paper we report on the first successful porting of GRASS GIS, the oldest and largest Free Open Source (FOSS) GIS project, onto a compute cluster using Platform Computing's Load Sharing Facility (LSF). In 2008, GRASS6.3 was installed on the GFZ compute cluster, which at that time comprised 32 nodes. The interaction with the GIS was limited to the command line interface, which required further development to encapsulate the GRASS GIS business layer to facilitate its use by users not familiar with GRASS GIS. During the summer of 2011, multiple versions of GRASS GIS (v 6.4, 6.5 and 7.0) were installed on the upgraded GFZ compute cluster, now consisting of 234 nodes with 480 CPUs providing 3084 cores. The GFZ compute cluster currently offers 19 different processing queues with varying hardware capabilities and priorities, allowing for fine-grained scheduling and load balancing. After successful testing of core GIS functionalities, including the graphical user interface, mechanisms were developed to deploy scripted geocomputation tasks onto dedicated processing queues. The mechanisms are based on earlier work by NETELER et al. (2008). A first application of the new GIS functionality was the generation of maps of simulated tsunamis in the Mediterranean Sea for the Tsunami Atlas of the FP-7 TRIDEC Project (www.tridec-online.eu). For this, up to 500 processing nodes were used in parallel. Further trials included the processing of geometrically complex problems, requiring significant amounts of processing time. The GIS cluster successfully completed all these tasks, with processing times

Using a Web GIS Plate Tectonics Simulation to Promote Geospatial Thinking

Science.gov (United States)

Bodzin, Alec M.; Anastasio, David; Sharif, Rajhida; Rutzmoser, Scott

2016-01-01

Learning with Web-based geographic information system (Web GIS) can promote geospatial thinking and analysis of georeferenced data. Web GIS can enable learners to analyze rich data sets to understand spatial relationships that are managed in georeferenced data visualizations. We developed a Web GIS plate tectonics simulation as a capstone learning…

Designing GIS Learning Materials for K-12 Teachers

Science.gov (United States)

Hong, Jung Eun

2017-01-01

Although previous studies have proven the usefulness and effectiveness of geographic information system (GIS) use in the K-12 classroom, the rate of teacher adoption remains low. The identified major barrier to its use is a lack of teachers' background and experience. To solve this limitation, many organisations have provided GIS-related teacher…

Assessment of Meteorological Drought Hazard Area using GIS in ...

African Journals Online (AJOL)

Michael Horsfall

The purpose of this study was to make a model of the meteorological drought hazard area using GIS. ... overlaying different hazard indicator maps in the GIS, deploying the new model. The final ..... Northeast Thailand Project Bangkok. Min. of.

Basic survey for coal resources exploitation for Fiscal 1998. Coal GIS survey; 1998 nendo seitan shigeh kaihatsu kiso chosa. Sekitan GIS chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

For the construction of a coal mine assessment technology system, surveys are conducted on the current state and technology trends of resources-related GIS (geographical information system) in other countries. When one ponders over coal-rich areas to be newly explored and developed in one's study on the stable exploitation of coal abroad and its import to this country, what interests one gradually shifts from known superior large-scale coal mine areas to next-generation coal mine areas yet to be exploited. Accordingly, it is mandatory to build an assessment-oriented comprehensive technology system capable of promptly dealing with any changes in natural, geological conditions that may be presented by coal mines to be exploited. Although GIS is recognized as a useful means not only in the field of natural science but also in other fields whose data may be plotted on a map, its position is not yet established when it comes to coal resources. It is therefore necessary to promptly introduce GIS into the field of coal. In fiscal 1998, on-site surveys were conducted not only in Japan but also in the U.S., Canada, and Australia who are senior to Japan in terms of GIS application. Also, information was collected from literature and via Internet, surveys were conducted about the use of GIS in the field of earth science especially in the field of coal resources, and the state of the digital data utilizing setup indispensable for the proper operation of GIS was investigated. (NEDO)

Application of GIS Rapid Mapping Technology in Disaster Monitoring

Science.gov (United States)

Wang, Z.; Tu, J.; Liu, G.; Zhao, Q.

2018-04-01

With the rapid development of GIS and RS technology, especially in recent years, GIS technology and its software functions have been increasingly mature and enhanced. And with the rapid development of mathematical statistical tools for spatial modeling and simulation, has promoted the widespread application and popularization of quantization in the field of geology. Based on the investigation of field disaster and the construction of spatial database, this paper uses remote sensing image, DEM and GIS technology to obtain the data information of disaster vulnerability analysis, and makes use of the information model to carry out disaster risk assessment mapping.Using ArcGIS software and its spatial data modeling method, the basic data information of the disaster risk mapping process was acquired and processed, and the spatial data simulation tool was used to map the disaster rapidly.

'Nuclear emergency preparedness' for local residents. Support of on-site training of many kinds of places and people

International Nuclear Information System (INIS)

Kameda, Kazuhisa

2005-01-01

In order to support and ensure the nuclear emergency preparedness system and safety of residents in cities, towns and villages, NPO Nuclear Emergency Preparedness Support Center was established in May, 2003. 130 on-site training and education classes were held and above 2,000 participants attended to them for two years. Objects of the countermeasure of nuclear emergency preparedness in local area and residents, what is nuclear emergency for inhabitants, what is use of Table of International Nuclear Event Scale (INES)?, a use of INES, relation between INES level and the nuclear emergency preparedness system are discussed. (S.Y.)

Advanced medical life support procedures in vitally compromised children by a helicopter emergency medical service.

NARCIS (Netherlands)

Gerritse, B.M.; Schalkwijk, A.; Pelzer, B.J.; Scheffer, G.J.; Draaisma, J.M.T.

2010-01-01

BACKGROUND: To determine the advanced life support procedures provided by an Emergency Medical Service (EMS) and a Helicopter Emergency Medical Service (HEMS) for vitally compromised children. Incidence and success rate of several procedures were studied, with a distinction made between procedures

Propagation of positional error in 3D GIS

NARCIS (Netherlands)

Biljecki, Filip; Heuvelink, Gerard B.M.; Ledoux, Hugo; Stoter, Jantien

2015-01-01

While error propagation in GIS is a topic that has received a lot of attention, it has not been researched with 3D GIS data. We extend error propagation to 3D city models using a Monte Carlo simulation on a use case of annual solar irradiation estimation of building rooftops for assessing the

Application of GIS technology in public health: successes and challenges.

Science.gov (United States)

Fletcher-Lartey, Stephanie M; Caprarelli, Graziella

2016-04-01

The uptake and acceptance of Geographic Information Systems (GIS) technology has increased since the early 1990s and public health applications are rapidly expanding. In this paper, we summarize the common uses of GIS technology in the public health sector, emphasizing applications related to mapping and understanding of parasitic diseases. We also present some of the success stories, and discuss the challenges that still prevent a full scope application of GIS technology in the public health context. Geographical analysis has allowed researchers to interlink health, population and environmental data, thus enabling them to evaluate and quantify relationships between health-related variables and environmental risk factors at different geographical scales. The ability to access, share and utilize satellite and remote-sensing data has made possible even wider understanding of disease processes and of their links to the environment, an important consideration in the study of parasitic diseases. For example, disease prevention and control strategies resulting from investigations conducted in a GIS environment have been applied in many areas, particularly in Africa. However, there remain several challenges to a more widespread use of GIS technology, such as: limited access to GIS infrastructure, inadequate technical and analytical skills, and uneven data availability. Opportunities exist for international collaboration to address these limitations through knowledge sharing and governance.

Emergency medical support for a manned stratospheric balloon test program.

Science.gov (United States)

Blue, Rebecca S; Norton, Sean C; Law, Jennifer; Pattarini, James M; Antonsen, Erik L; Garbino, Alejandro; Clark, Jonathan B; Turney, Matthew W

2014-10-01

Red Bull Stratos was a commercial program that brought a test parachutist, protected by a full-pressure suit, in a stratospheric balloon with pressurized capsule to over 127,582 ft (38,969 m), from which he free fell and subsequently parachuted to the ground. Given that the major risks to the parachutist included ebullism, negative Gz (toe-to-head) acceleration exposure from an uncontrolled flat spin, and trauma, a comprehensive plan was developed to recover the parachutist under nominal conditions and to respond to any medical contingencies that might have arisen. In this report, the project medical team describes the experience of providing emergency medical support and crew recovery for the manned balloon flights of the program. The phases of flight, associated risks, and available resources were systematically evaluated. Six distinct phases of flight from an Emergency Medical Services (EMS) standpoint were identified. A Medical Support Plan was developed to address the risks associated with each phase, encompassing personnel, equipment, procedures, and communications. Despite geographical, communications, and resource limitations, the medical team was able to implement the Medical Support Plan, enabling multiple successful manned balloon flights to 71,615 ft (21,828 m), 97,221 ft (29,610 m), and 127,582 ft (38,969 m). The experience allowed refinement of the EMS and crew recovery procedures for each successive flight and could be applied to other high altitude or commercial space ventures.

GIS-Based Approach for Municipal Renewable Energy Planning to Support Post-Earthquake Revitalization: A Japanese Case Study

Directory of Open Access Journals (Sweden)

Qianna Wang

2016-07-01

Full Text Available Following a regional-level study conducted in Fukushima Prefecture, Japan (Wang et al., 2014 [1], this paper presents an approach for municipal renewable energy planning and its experimental application in a Japanese municipality using a Geographic Information System (GIS. The proposed approach is comprised of local issue identification, renewable energy potential evaluation and visualization, site comparison and scenario analysis. GIS was used to analyze and visualize solar, wind and biomass (forest and agriculture residue potential within Kawamata Town, Fukushima, Japan. According to local conditions, all potential sites were coded and then compared based on different criteria, such as solar radiation, wind speed, slope and land uses, among others. In the scenario analysis section, two scenarios, “renewable energy prioritized” and ”evacuation area prioritized”, were adopted and compared. The scenarios are altered in terms of placement and the number of renewable energy facilities inside and outside evacuation areas within the town. The results generated through the proposed approach can provide information on local potentials of renewable energy resources, as well as renewable energy development alternatives at the municipal level. They can be used in the interactive dialogue for the municipal renewable energy planning process, to help to fulfill the municipality’s post-earthquake energy developmental vision.

Use of GIS Mapping as a Public Health Tool–-From Cholera to Cancer

Directory of Open Access Journals (Sweden)

George J. Musa

2013-01-01

Full Text Available The field of medical geographic information systems (Medical GIS has become extremely useful in understanding the bigger picture of public health. The discipline holds a substantial capacity to understand not only differences, but also similarities in population health all over the world. The main goal of marrying the disciplines of medical geography, public health and informatics is to understand how countless health issues impact populations, and the trends by which these populations are affected. From the 1990s to today, this practical approach has become a valued and progressive system in analyzing medical and epidemiological phenomena ranging from cholera to cancer. The instruments supporting this field include geographic information systems (GIS, disease surveillance, big data, and analytical approaches like the Geographical Analysis Machine (GAM, Dynamic Continuous Area Space Time Analysis (DYCAST, cellular automata, agent-based modeling, spatial statistics and self-organizing maps. The positive effects on disease mapping have proven to be tremendous as these instruments continue to have a great impact on the mission to improve worldwide health care. While traditional uses of GIS in public health are static and lacking real-time components, implementing a space-time animation in these instruments will be monumental as technology and data continue to grow.

Use of GIS Mapping as a Public Health Tool-From Cholera to Cancer.

Science.gov (United States)

Musa, George J; Chiang, Po-Huang; Sylk, Tyler; Bavley, Rachel; Keating, William; Lakew, Bereketab; Tsou, Hui-Chen; Hoven, Christina W

2013-01-01

The field of medical geographic information systems (Medical GIS) has become extremely useful in understanding the bigger picture of public health. The discipline holds a substantial capacity to understand not only differences, but also similarities in population health all over the world. The main goal of marrying the disciplines of medical geography, public health and informatics is to understand how countless health issues impact populations, and the trends by which these populations are affected. From the 1990s to today, this practical approach has become a valued and progressive system in analyzing medical and epidemiological phenomena ranging from cholera to cancer. The instruments supporting this field include geographic information systems (GIS), disease surveillance, big data, and analytical approaches like the Geographical Analysis Machine (GAM), Dynamic Continuous Area Space Time Analysis (DYCAST), cellular automata, agent-based modeling, spatial statistics and self-organizing maps. The positive effects on disease mapping have proven to be tremendous as these instruments continue to have a great impact on the mission to improve worldwide health care. While traditional uses of GIS in public health are static and lacking real-time components, implementing a space-time animation in these instruments will be monumental as technology and data continue to grow.

Automating the Fireshed Assessment Process with ArcGIS

Science.gov (United States)

Alan Ager; Klaus Barber

2006-01-01

A library of macros was developed to automate the Fireshed process within ArcGIS. The macros link a number of vegetation simulation and wildfire behavior models (FVS, SVS, FARSITE, and FlamMap) with ESRI geodatabases, desktop software (Access, Excel), and ArcGIS. The macros provide for (1) an interactive linkage between digital imagery, vegetation data, FVS-FFE, and...

Emergent leadership among tenants with psychiatric disabilities living in supported housing.

Science.gov (United States)

Piat, Myra; Sabetti, Judith; Padgett, Deborah

2018-06-01

The overall aim of this study was to explore the experiences of people with psychiatric disabilities living as tenants in independent, supported apartments for the first time. Supported housing provides an alternative to structured, custodial housing models, such as foster homes, or board-and-care homes, for clients in public mental health systems. This article reports findings on how leadership emerged among tenants after making the transition from custodial to supported housing. Semi-structured interviews were conducted with tenants (n = 24) and included questions on their housing history, current living situation, relationships with staff, participation, and understanding or experience of leadership. Interviews were transcribed verbatim, codes generated, and a thematic analysis conducted using a constructivist approach. The findings revealed an understanding and appreciation of leadership among tenants, who identified six pathways to leadership in their housing as a response to unmet tenant needs. Most tenant leaders emerged outside of formal authority or power structures. Supported housing provides a unique social setting and empowering community where the potential of persons with psychiatric disabilities to assume leadership may be realized and further developed. Mental health professionals working in community housing networks are well placed to harness these face-to-face tenant communities, and their natural leaders, as an additional tool in promoting tenant recovery, mutual help, neighbourhood integration, and the broader exercise of citizenship. © 2017 Australian College of Mental Health Nurses Inc.

Application of virtual reality GIS in urban planning: an example in Huangdao district

Science.gov (United States)

Han, Yong; Qiao, Xin; Sun, Weichen; Zhang, Litao

2007-06-01

As an important development direction of GIS, Virtual Reality GIS was founded in 1950s. After 1990s, due to the fast development of its theory and the computer technology, Virtual Reality has been applied to many fields: military, aerospace, design, manufactory, information management, business, construction, city management, medical, education, etc.. The most famous project is the Virtual Los Angeles implemented by the Urban Simulation Team (UST) of UCLA. The main focus of the UST is a long-term effort to build a real-time Virtual Reality model of the entire Los Angeles basin for use by architects, urban planners, emergency response teams, and the government entities. When completed, the entire Virtual L.A. model will cover an area well in excess of 10000 square miles and will elegantly scale from satellite images to street level views accurate enough to allow the signs in the window of the shops and the graffiti on the walls to be legible. Till now, the virtual L.A. has been applied to urban environments and design analysis, transportation studies, historic reconstruction and education, etc. Compared to the early development abroad, the development of Virtual Reality GIS in China is relatively late. It is researched in some universities in early years. But recently, it has been attended by the populace and been used in many social fields: urban planning, environmental protection, historic protection and recovery, real estate, tourism, education etc.. The application of Virtual Reality in urban planning of Huangdao District, Qingdao City is introduced in this paper.

Phytopatological monitoring of Inonotus rickii and GPS-GIS applications, Rome, Italy

Directory of Open Access Journals (Sweden)

Moriondo M

2008-06-01

Full Text Available Plant disease management may be improved by collecting, storing, manipulating, analysing and displaying epidemiological information using a Geographic Information System (GIS, a useful tool to evaluate plant disease problems in a spatial context. In this study, GIS analysis was applied along with global positioning systems (GPS to integrate field data-collected with the spatial distribution of the pathogen Inonotus rickii. This pathogen provokes a decay of sapwood/heartwood and cankers, determining a progressive crown dieback and structural weakness of the trees, therefore increasing risk of branch breaks and tree failures. It is widespread in tropical and subtropical countries and it has already been recorded in many areas in Rome on Acer negundo, Albizia julibrissin, Koelreuteria paniculata, Celtis australis and Platanus x acerifolia. A survey was carried out in different boulevards of A. negundo and A. julibrissin with the aim of evaluating disease symptoms such as sparse foliage, dead twigs and branches, wood decay and presence of fungal structures. In this survey, I. rickii was recorded also on Robinia pseudoacacia, which is a new host. The study allowed to obtain thematic maps showing the spatial distribution of all infected trees, as well as the presence of anamorph and/or teleomorph structures of the fungus. Moreover, a map representing the incidence of the pathogen in different boulevards was obtained. The usefulness of GIS analysis in studies aimed to support and refine management strategies for disease control in urban trees is discussed.

A Study of Flood Evacuation Center Using GIS and Remote Sensing Technique

Science.gov (United States)

Mustaffa, A. A.; Rosli, M. F.; Abustan, M. S.; Adib, R.; Rosli, M. I.; Masiri, K.; Saifullizan, B.

2016-07-01

This research demonstrated the use of Remote Sensing technique and GIS to determine the suitability of an evacuation center. This study was conducted in Batu Pahat areas that always hit by a series of flood. The data of Digital Elevation Model (DEM) was obtained by ASTER database that has been used to delineate extract contour line and elevation. Landsat 8 image was used for classification purposes such as land use map. Remote Sensing incorporate with GIS techniques was used to determined the suitability location of the evacuation center from contour map of flood affected areas in Batu Pahat. GIS will calculate the elevation of the area and information about the country of the area, the road access and percentage of the affected area. The flood affected area map may provide the suitability of the flood evacuation center during the several levels of flood. The suitability of evacuation centers can be determined based on several criteria and the existing data of the evacuation center will be analysed. From the analysis among 16 evacuation center listed, there are only 8 evacuation center suitable for the usage during emergency situation. The suitability analysis was based on the location and the road access of the evacuation center toward the flood affected area. There are 10 new locations with suitable criteria of evacuation center proposed on the study area to facilitate the process of rescue and evacuating flood victims to much safer and suitable locations. The results of this study will help in decision making processes and indirectly will help organization such as fire-fighter and the Department of Social Welfare in their work. Thus, this study can contribute more towards the society.

The Architecture of a Complex GIS & Spreadsheet Based DSS

Directory of Open Access Journals (Sweden)

Dinu Airinei

2010-01-01

Full Text Available The decision support applications available on today market use to combine the decision analysis of historical databased on On-Line Analytical Processing (OLAP products or spreadsheet pivot tables with some new reporting facilities as alerts or key performance indicators available in portal dashboards or in complex spreadsheet-like reports, both corresponding to a new approach of the field called Business Intelligence. Moreover the geographical features of GIS added to DSS applications become more and more required by many kinds of businesses. In fact they are more useful this way than as distinctive parts.The paper tries to present a certain DSS architecture based on the association between such approaches and technologies. The particular examples are meant to support all the theoretical arguments and to complete the understanding of the interaction schemas available.

A GIS-based disaggregate spatial watershed analysis using RADAR data

International Nuclear Information System (INIS)

Al-Hamdan, M.

2002-01-01

Hydrology is the study of water in all its forms, origins, and destinations on the earth.This paper develops a novel modeling technique using a geographic information system (GIS) to facilitate watershed hydrological routing using RADAR data. The RADAR rainfall data, segmented to 4 km by 4 km blocks, divides the watershed into several sub basins which are modeled independently. A case study for the GIS-based disaggregate spatial watershed analysis using RADAR data is provided for South Fork Cowikee Creek near Batesville, Alabama. All the data necessary to complete the analysis is maintained in the ArcView GIS software. This paper concludes that the GIS-Based disaggregate spatial watershed analysis using RADAR data is a viable method to calculate hydrological routing for large watersheds. (author)

Planning for emergency services using GIS-based geographic accessibility analysis

CSIR Research Space (South Africa)

Green, Cheri A

2014-05-01

Full Text Available Municipalities and metropolitan structures are required by law to provide sufficient response to emergency situations. In order to respond efficiently to disasters such as fire and flooding, it is necessary to place facilities optimally. This case...

The Benefits and Complexities of Operating Geographic Information Systems (GIS) in a High Performance Computing (HPC) Environment

Science.gov (United States)

Shute, J.; Carriere, L.; Duffy, D.; Hoy, E.; Peters, J.; Shen, Y.; Kirschbaum, D.

2017-12-01

The NASA Center for Climate Simulation (NCCS) at the Goddard Space Flight Center is building and maintaining an Enterprise GIS capability for its stakeholders, to include NASA scientists, industry partners, and the public. This platform is powered by three GIS subsystems operating in a highly-available, virtualized environment: 1) the Spatial Analytics Platform is the primary NCCS GIS and provides users discoverability of the vast DigitalGlobe/NGA raster assets within the NCCS environment; 2) the Disaster Mapping Platform provides mapping and analytics services to NASA's Disaster Response Group; and 3) the internal (Advanced Data Analytics Platform/ADAPT) enterprise GIS provides users with the full suite of Esri and open source GIS software applications and services. All systems benefit from NCCS's cutting edge infrastructure, to include an InfiniBand network for high speed data transfers; a mixed/heterogeneous environment featuring seamless sharing of information between Linux and Windows subsystems; and in-depth system monitoring and warning systems. Due to its co-location with the NCCS Discover High Performance Computing (HPC) environment and the Advanced Data Analytics Platform (ADAPT), the GIS platform has direct access to several large NCCS datasets including DigitalGlobe/NGA, Landsat, MERRA, and MERRA2. Additionally, the NCCS ArcGIS Desktop Windows virtual machines utilize existing NetCDF and OPeNDAP assets for visualization, modelling, and analysis - thus eliminating the need for data duplication. With the advent of this platform, Earth scientists have full access to vast data repositories and the industry-leading tools required for successful management and analysis of these multi-petabyte, global datasets. The full system architecture and integration with scientific datasets will be presented. Additionally, key applications and scientific analyses will be explained, to include the NASA Global Landslide Catalog (GLC) Reporter crowdsourcing application, the

Decision-making support system based on MAS for emergency response to nuclear accidents of marine pressurized-water reactor

International Nuclear Information System (INIS)

Chen Dengke; Zhang Dafa; Jiang Wei; Chen Yonghong

2007-01-01

Emergency decision-making to Marine Pressurized-Water Reactor (MPWR) was severely restricted by the complex environment. To enhance the emergency decision-making ability of MPWR, reducing the effect of emergencies, an emergency Decision-making Support System (DSS) which based on Multi-agent System (MAS) was presented. In the system, the HLA/RTI was used as the support environment, and the structure and the Control Agent (SCA), Analyse Agent (AA), Countermeasure Agent (CA), Evaluation Agent (EVA) and Environment Agent (ENA) were designed. The MAS were with the characteristics of autonomy, reactivity and initiative, which were fully used in the system to make effective decision for emergencies. (authors)

A GIS-BASED ENVIRONMENTAL HEALTH INFORMATION SOURCE FOR MALAYSIAN CONTEXT

OpenAIRE

Lau Tiu Chung; Lau Bee Theng; Henry Lee Seldon

2013-01-01

In this paper, we propose a GIS-based system for collection and targeted distribution of latest alerts and real-time environmental factors to the Malaysian population. We call it the Environmental Health Management System (EHMS). This GIS-based system is designed to facilitate and encourage research into environmental health quality issues by providing a comprehensive tracking and monitoring tool. This GIS-based system is embedded with Google Maps API and Geocoding API services to visualize t...

Patterns of Consumption and Connectedness in GIS Web Sources

NARCIS (Netherlands)

Ballatore, Andrea; Scheider, S.; Lemmens, Rob

2018-01-01

Every day, practitioners, researchers, and students consult the Web to meet their information needs about GIS concepts and tools. How do we improve GIS in terms of conceptual organisation, findability, interoperability and relevance for user needs? So far, efforts have been mainly top-down,

Design and Implementation of High-Performance GIS Dynamic Objects Rendering Engine

Science.gov (United States)

Zhong, Y.; Wang, S.; Li, R.; Yun, W.; Song, G.

2017-12-01

Spatio-temporal dynamic visualization is more vivid than static visualization. It important to use dynamic visualization techniques to reveal the variation process and trend vividly and comprehensively for the geographical phenomenon. To deal with challenges caused by dynamic visualization of both 2D and 3D spatial dynamic targets, especially for different spatial data types require high-performance GIS dynamic objects rendering engine. The main approach for improving the rendering engine with vast dynamic targets relies on key technologies of high-performance GIS, including memory computing, parallel computing, GPU computing and high-performance algorisms. In this study, high-performance GIS dynamic objects rendering engine is designed and implemented for solving the problem based on hybrid accelerative techniques. The high-performance GIS rendering engine contains GPU computing, OpenGL technology, and high-performance algorism with the advantage of 64-bit memory computing. It processes 2D, 3D dynamic target data efficiently and runs smoothly with vast dynamic target data. The prototype system of high-performance GIS dynamic objects rendering engine is developed based SuperMap GIS iObjects. The experiments are designed for large-scale spatial data visualization, the results showed that the high-performance GIS dynamic objects rendering engine have the advantage of high performance. Rendering two-dimensional and three-dimensional dynamic objects achieve 20 times faster on GPU than on CPU.

Historical wetlands mapping and GIS processing for the Savannah River Site Database

International Nuclear Information System (INIS)

Christel, L.M.

1994-08-01

New policies regarding the open-quotes no net lossclose quotes of wetlands have presented resource managers and GIS analysts with a challenging ecological application. Historical aerial photography provides a temporal record of conditions over time, beneficial when appraising wetland gain and loss because man-made disturbances can have both short and long term effects on wetland communities. This is particularly true when assessing existing communities for restoration and reclamation of the ecologic structure and function of the community prior to a disturbance. Remediation efforts can be optimized when definitive documentation exists of the original communities. The Geographic Information System (GIS) is a powerful tool for integrating these data sets and performing spatial and temporal analyses in support of ecological applications. On the Savannah River Site (SRS) temporal analysis of multispectral scanner data has shown where wetlands were impacted by reactor operation, such as thermal discharge into creeks and swamps, and where wetlands were removed due to the construction of facilities. The GIS database was used to determine how the distribution and composition of wetland classes have changed over time. Historic black and white aerial photography of SRS as well as color infrared aerial photography as recent as 1989was used to develop a more current land cover database. Six wetland classes were photointerpreted. The historical data layer was then used in spatial analyses to aid in deriving potential viable and cost effective management technique alternatives for remediation of wetlands influenced by past reactor operations and has provided acreage estimates of wetlands lost. Acreage values can be used to estimate the potential costs of wetland remediation. This application of temporal analysis using a GIS demonstrates the utility of documenting prior conditions before remediation actually commences and how to maximize cost effective remediation efforts

Depth data research of GIS based on clustering analysis algorithm

Science.gov (United States)

Xiong, Yan; Xu, Wenli

2018-03-01

The data of GIS have spatial distribution. Geographic data has both spatial characteristics and attribute characteristics, and also changes with time. Therefore, the amount of data is very large. Nowadays, many industries and departments in the society are using GIS. However, without proper data analysis and mining scheme, GIS will not exert its maximum effectiveness and will waste a lot of data. In this paper, we use the geographic information demand of a national security department as the experimental object, combining the characteristics of GIS data, taking into account the characteristics of time, space, attributes and so on, and using cluster analysis algorithm. We further study the mining scheme for depth data, and get the algorithm model. This algorithm can automatically classify sample data, and then carry out exploratory analysis. The research shows that the algorithm model and the information mining scheme can quickly find hidden depth information from the surface data of GIS, thus improving the efficiency of the security department. This algorithm can also be extended to other fields.

DEVELOPMENT OF A CARBON MANAGEMENT GEOGRAPHIC INFORMATION SYSTEM (GIS) FOR THE UNITED STATES

Energy Technology Data Exchange (ETDEWEB)

Howard J. Herzog

2004-03-01

The Lab for Energy and Environment (LFEE) at MIT is developing a Geographic Information System (GIS) for carbon management. The GIS will store, integrate, and manipulate information relating to the components of carbon management systems. Additionally, the GIS can be used to interpret and analyze the effect of developing these systems. In the first year of this three year project, we focused on two tasks: (1) specifying the system design--defining in detail the GIS data requirements, the types of analyses that can be conducted, and the forms of output we will produce, as well as designing the computer architecture of the GIS and (2) creating the ''core'' datasets--identifying data sources and converting them into a form accessible by the GIS.

Interactive Maps on War and Peace: A WebGIS Application for Civic Education

Science.gov (United States)

Wirkus, Lars; Strunck, Alexander

2013-04-01

War and violent conflict are omnipresent-be it war in the Middle East, violent conflicts in failed states or increasing military expenditures and exports/ imports of military goods. To understand certain conflicts or peace processes and their possible interrelation, to conduct a well-founded political discussion and to support or influence decision-making, one matter is of special importance: easily accessible and, in particular, reliable data and information. Against this background, the Bonn International Center for Conversion (BICC) in close cooperation with the German Federal Agency for Civic Education (bpb) has been developing a map-based information portal on war and peace with various thematic modules for the latter's online service (http://sicherheitspolitik.bpb.de). The portal will eventually offer nine of such modules that are intended to give various target groups, such as interested members of the public, teachers and learners, policymakers and representatives of the media access to the required information in form of an interactive and country-based global overview or a comparison of different issues. Five thematic modules have been completed so far: War and conflict, peace and demobilization, military capacities, resources and conflict, conventional weapons. The portal offers a broad spectrum of different data processing and visualization tools. Its central feature is an interactive mapping component based on WebGIS and a relational database. Content and data provided through thematic maps in the form of WebGIS layers are generally supplemented by info graphics, data tables and short articles providing deeper knowledge on the respective issue. All modules and their sub-chapters are introduced by background texts. They put all interactive maps of a module into an appropriate context and help the users to also understand the interrelation between various layers. If a layer is selected, all corresponding texts and graphics are shown automatically below

GIS applications in riparian management

Science.gov (United States)

Carrie Christman; Douglas W. Shaw; Charles L. Spann; Penny Luehring

1996-01-01

GIS was used to prioritize watersheds for treatment needs across the USDA Forest Service Southwestern Region. Factors in this analysis included soil condition, riparian habitat, population centers and mining sites.

GIS-based Integration of Interdisciplinary Ecological Data to Detect ...

African Journals Online (AJOL)

Key words: mangrove, satellite imagery, environment, aerial photography, GIS, Kenya Historic environmental, faunal, floral and socioeconomic data of Gazi Bay in coastal Kenya were collated and integrated into a GIS environment and data of impacts due to various factors were then related to remotely sensed data.

Monitoring Shoreline Change using Remote Sensing and GIS: A ...

African Journals Online (AJOL)

Key words: remote sensing, geographic information system (GIS), aerial photographs, shoreline change. Data from aerial photographs taken in 1981, 1992 and 2002 of the Kunduchi shoreline off the Dar es Salaam coast were integrated in a geographic information system (GIS) to determine shoreline change in that locality.

GIS and remote sensing components of a spatial decision system in support of sustainable forest management

Energy Technology Data Exchange (ETDEWEB)

St-Onge, B.A.; Waaub, J.P.; Alleaume, S.; Couture, M. [Quebec Univ., Dept. of Geography, Montreal, PQ (Canada)

1999-05-01

The development of a tool used in decision making processes in forest management was discussed with special focus on two critical aspects of the decision aid system which pertain to spatial information. These are: (1) the use of up-to-date precise information, and (2) the accessibility of this information. This paper focuses on two approaches designed to provide accessible high quality information to the users of the decision aid system: i.e. the development of high resolution remote sensing methods, and a GIS data warehouse accessible over the Internet. 4 refs., 2 figs.

Federal Emergency Management Information System (FEMIS) system administration guide, version 1.4.5

Energy Technology Data Exchange (ETDEWEB)

Arp, J.A.; Burnett, R.A.; Carter, R.J. [and others

1998-06-26

The Federal Emergency Management Information Systems (FEMIS) is an emergency management planning and response tool that was developed by the Pacific Northwest National Laboratory (PNNL) under the direction of the US Army Chemical Biological Defense Command. The FEMIS System Administration Guide provides information necessary for the system administrator to maintain the FEMIS system. The FEMIS system is designed for a single Chemical Stockpile Emergency Preparedness Program (CSEPP) site that has multiple Emergency Operations Centers (EOCs). Each EOC has personal computers (PCs) that emergency planners and operations personnel use to do their jobs. These PCs are connected via a local area network (LAN) to servers that provide EOC-wide services. Each EOC is interconnected to other EOCs via a Wide Area Network (WAN). Thus, FEMIS is an integrated software product that resides on client/server computer architecture. The main body of FEMIS software, referred to as the FEMIS Application Software, resides on the PC client(s) and is directly accessible to emergency management personnel. The remainder of the FEMIS software, referred to as the FEMIS Support Software, resides on the UNIX server. The Support Software provides the communication, data distribution, and notification functionality necessary to operate FEMIS in a networked, client/server environment. The UNIX server provides an Oracle relational database management system (RDBMS) services, ARC/INFO GIS (optional) capabilities, and basic file management services. PNNL developed utilities that reside on the server include the Notification Service, the Command Service that executes the evacuation model, and AutoRecovery. To operate FEMIS, the Application Software must have access to a site specific FEMIS emergency management database. Data that pertains to an individual EOC`s jurisdiction is stored on the EOC`s local server. Information that needs to be accessible to all EOCs is automatically distributed by the FEMIS

Open Source GIS Connectors to the NASA GES DISC Satellite Data

Science.gov (United States)

Pham, L.; Kempler, S. J.; Yang, W.

2014-12-01

The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) houses a suite of satellite-derived GIS data including high spatiotemporal resolution precipitation, air quality, and modeled land surface parameter data. The data are extremely useful to various GIS research and applications at regional, continental, and global scales, as evidenced by the growing GIS user requests to the data. On the other hand, we also found that some GIS users, especially those from the ArcGIS community, having difficulties in obtaining, importing, and using our data, primarily due to the unfamiliarity of the users with our products and GIS software's lack of capabilities in dealing with the predominately raster form data in various sometimes very complicated formats. In this presentation, we introduce a set of open source ArcGIS data connectors that significantly simplify the access and use of our data in ArcGIS. With the connectors, users do not need to know the data access URLs, the access protocols or syntaxes, and data formats. Nor do they need to browse through a long list of variables that are often embedded into one single science data file and whose names may sometimes be confusing to those not familiar with the file (such as variable CH4_VMR_D for "CH4 Volume mixing ratio from the descending orbit" and variable EVPsfc for "Total Evapotranspiration"). The connectors will expose most GIS-related variables to the users with easy to understand names. User can simply define the spatiotemporal range of their study, select interested parameter(s), and have the needed data be downloaded, imported, and displayed in ArcGIS. The connectors are python text files and there is no installation process. They can be placed at any user directory and be started by simply clicking on it. In the presentation, we'll also demonstrate how to use the tools to load GES DISC time series air quality data with a few clicks and how such data depict the spatial and temporal patterns of

The application of GIS and its components in tourism

Directory of Open Access Journals (Sweden)

Jovanović Verka

2008-01-01

Full Text Available Since the success of any tourism business is determined by tourism planning, development research and marketing, the first thing we review in this article is GIS application for tourism planning. Both tourism and IT increasingly provide strategic opportunities and powerful tools for economic growth, redistribution of wealth and development of equity around the globe. GIS technology offers great opportunities for the development of modern tourism applications using maps. This technology integrates common database operations such as query with the unique visualization and geographic analysis benefits offered by maps. GIS is used for bringing the georeferenced data (spatial and non spatial of geographic location Zlatibor and Zlatar into digital maps. Each object is assigned to a thematic layer. Each layer combines related objects like roads, building, protected areas or watercourses. In this research the authors used GIS in three types of applications such as inventory, analysis and evaluation of plan based on tourism development.

DSS and GIS in Knowledge Transformation Process

Directory of Open Access Journals (Sweden)

Klimešová Dana

2009-06-01

Full Text Available Knowledge is an important resource for successful decision-making process in the whole society today. The special procedures of control and management of knowledge therefore have to be used. In the area of knowledge management and knowledge engineering basic terms of these disciplines are data, information, knowledge and knowledge transformation. The knowledge can be defined as a dynamic human process of justifying personal beliefs. Knowledge is a product of successful decision-making process. Knowledge transformation is a spiralling process of interactions between explicit and tacit knowledge that leads to the new knowledge. Nonaka and all show, that the combination of these two categories makes possible to conceptualise four conversion steps: Socialisation, Externalisation, Combination and Internalisation (SECI model. Another model of knowledge creation is the Knowledge Transformation Continuum (BCI Knowledge Group that begins with the articulation of a specific instruction representing the best way that a specific task, or series of tasks, should be performed. Knowledge modelling and knowledge representation is an important field of research also in Computer Science and Artificial Intelligence. The definition of knowledge in Artificial Intelligence is a noticeable different, because Artificial Intelligence is typically dealing with formalized knowledge (e.g. ontology. The development of knowledge-based systems was seen as a process of transferring human knowledge to an implemented knowledge base. Decision Support Systems (DSS, Geographical Information Systems (GIS and Operations Research/Management Science (OR/MS modelling process support decision-making process, therefore they also produce a new knowledge. A Decision Support Systems are an interactive computer-based systems helping decision makers complete decision process. Geographic Information Systems provide essential marketing and customer intelligence solutions that lead to better

EpiScanGIS: an online geographic surveillance system for meningococcal disease

Directory of Open Access Journals (Sweden)

Albert Jürgen

2008-07-01

Full Text Available Abstract Background Surveillance of infectious diseases increasingly relies on Geographic Information Systems (GIS. The integration of pathogen fine typing data in dynamic systems and visualization of spatio-temporal clusters are a technical challenge for system development. Results An online geographic information system (EpiScanGIS based on open source components has been launched in Germany in May 2006 for real time provision of meningococcal typing data in conjunction with demographic information (age, incidence, population density. Spatio-temporal clusters of disease detected by computer assisted cluster analysis (SaTScan™ are visualized on maps. EpiScanGIS enables dynamic generation of animated maps. The system is based on open source components; its architecture is open for other infectious agents and geographic regions. EpiScanGIS is available at http://www.episcangis.org, and currently has 80 registered users, mostly from the public health service in Germany. At present more than 2,900 cases of invasive meningococcal disease are stored in the database (data as of June 3, 2008. Conclusion EpiScanGIS exemplifies GIS applications and early-warning systems in laboratory surveillance of infectious diseases.

APPLICATION OF GIS TO ENVIRONMENTAL PROBLEMS IN THE HORNÁD VALLEY

OpenAIRE

Jablonská Jana; Dugáček Dušan; Orlitová Erika; Timčák Gejza M.

1997-01-01

The paper discusses some of the possibilities of managing environmental issues linked with industrial and communal activities, using the support of GIS. At the Dept. of Geology and Mineralogy (Numerical geolo-gy section) the first steps has been made to enable a participative monitoring of the state of the environment in the Hornád river valley through a number of projects. (RECENT, Hornád river watching). A number of speciali-zed application software was developed (for the MicroStation envir...

GIS based procedure of cumulative environmental impact assessment.

Science.gov (United States)

Balakrishna Reddy, M; Blah, Baiantimon

2009-07-01

Scale and spatial limits of impact assessment study in a GIS platform are two very important factors that could have a bearing on the genuineness and quality of impact assessment. While effect of scale has been documented and well understood, no significant study has been carried out on spatial considerations in an impact assessment study employing GIS technique. A novel technique of impact assessment demonstrable through GIS approach termed hereby as 'spatial data integrated GIS impact assessment method (SGIAM)' is narrated in this paper. The technique makes a fundamental presumption that the importance of environmental impacts is dependent, among other things, on spatial distribution of the effects of the proposed action and of the affected receptors in a study area. For each environmental component considered (e.g., air quality), impact indices are calculated through aggregation of impact indicators which are measures of the severity of the impact. The presence and spread of environmental descriptors are suitably quantified through modeling techniques and depicted. The environmental impact index is calculated from data exported from ArcINFO, thus giving significant importance to spatial data in the impact assessment exercise.

Application of GIS in siting of linear facilities

International Nuclear Information System (INIS)

Gallagher, G.A. III; Heatwole, D.W.; Schmidt, J.A.

1993-01-01

Geographic information systems (GIS) are powerful tools in the analysis and selection of environmentally acceptable corridors for linear facilities, such as roads and utility lines. GIS can serve several functions in corridor siting, including managing and manipulating extensive environmental databases, weighting and compositing data layers to enable spatial analysis for a ''path of least resistance,'' summarizing statistics for a comparison of alternative corridors, preparing color graphics for presentations and reports, and providing a record of alternative analysis for permitting reviews and legal challenges. In this paper, the authors examine the benefits and limitations of using GIS to site linear facilities, based mainly on their experience in siting a 600-mile natural gas pipeline in Florida. They implemented a phased analytical approach to define acceptable corridors several miles in width and then selected viable routes within the corridors using a magnified scale. This approach resulted in a dynamic siting process which required numerous iterations of analysis. Consequently, their experience has instilled the benefits derived by expending preliminary effort to create macros of the GIS analytical process so that subsequent effort is minimized during numerous iterations of corridor and route refinement

GIS modelling of solar potential in Toplica region

Directory of Open Access Journals (Sweden)

Valjarević Aleksandar

2016-01-01

Full Text Available In this paper we investigated possible potential solar area on Toplica region based on GIS (Geographical Information system and using a special kriging method with the help of open sources GIS software Quantum GIS. This kriging method is very special to vectorized and calculated the small area. The statistical approach calculated between datasets of three meteorological stations (Niš, Prokuplje, Kuršumlija. Data using of insolation from that meteorological stations from the period of (1953-2013 is useful for a solution to calculating solar potential. The also used parameter is hypsometry of relief of the whole area of Toplica region. Area of Toplica region is 2.231 km2 with a population of 90600 citizens. Divided into fourth municipalities (Prokuplje, Žitoradja, Black, Kuršumlija. The GIS modeling indicates that ideal areas for solar development are located the potential places in Toplica region. Only 13.6 km2 of the head model scores that were in the 90-100% range. However, given the statewide high insolation values with minimal variance, solar projects may be better suited for small-scale residential or commercial projects.

Leadership Qualities Emerging in an Online Social Support Group Intervention.

Science.gov (United States)

Kodatt, Stephanie A; Shenk, Jared E; Williams, Mark L; Horvath, Keith J

2014-11-01

Technology-delivered interventions addressing a broad range of problems for which clients present for therapy are proliferating. However, little is known of leadership dynamics that emerge in online group interventions. The purpose of this study was to assess the types of leadership qualities that would emerge in an online social support group intervention to improve medication adherence for men with HIV, and to characterize the demographic and psychosocial profiles of leaders. Written posts ( n =616) from 66 men were coded using an adapted version of the Full Range Model of Leadership. Results showed that 10% ( n =64) of posts reflected one of five leadership types, the most common of which was mentoring/providing feedback (40% of leadership posts). The next most common leadership style were instances in which encouragement was offered (30% of leadership posts). Leaders appeared to have lived with HIV longer and have higher Internet knowledge scores than non-leaders. Results indicate that online group interventions potentially may be useful to supplement traditional face-to-face treatment by providing an additional venue for group members to mentor and provide emotional support to each other. However, additional research is needed to more fully understand leadership qualities and group dynamics in other online group intervention settings.

Application of ONERS decision support system for off-site emergency exercise at Kalpakkam

International Nuclear Information System (INIS)

Baskaran, R.; Srinivas, C.V.; Rakesh, P.T.; Venkatesan, R.; Venkatraman, B.

2016-01-01

A radiation accident in any of the nuclear facilities leading to release of large quantities of radioactivity to environment calls for quick estimation of likely radiation doses to the public, environmental monitoring and its projection on spatial maps for taking necessary actions for mitigation. The MAPS in association with other DAE units and district administration conducted off site emergency exercise (OSEE) on 18 th August 2015 in the Emergency Planning Zone (EPZ) around the Kalpakkam site. The Online Nuclear Emergency Response System (ONERS) - Decision Support System (DSS) developed by IGCAR in collaboration with ISRO was used for generating radiological dose estimates for preparation of event chronology during the OSEE-2015

GIS DATA COLLECTION FOR PEDESTRIAN FACILITIES AND FURNITURE USING MAPINR FOR ANDROID

OpenAIRE

N. Naharudin; M. S. S. Ahamad; A. F. M. Sadullah

2016-01-01

Mobile GIS is introduced to reduce the time taken in completing the field data collection procedure. With the expansion of technology today, mobile GIS is not far behind. It can be integrated with the high-end innovation tools like smartphones. Spatial data capture which deemed to be the toughest stage of a GIS project is made simple with this method. Many studies had demonstrated the usage of mobile GIS in collecting spatial data and this paper discusses how it can be applied in capturing th...