Geographic Information/GIS Institutionalization in the 50 States: Users and Coordinators (95-11)

OpenAIRE

Warnecke, Lisa

1995-01-01

This report analyzes recent information about the use and institutionalization of geographic information and related technologies such as geographic information systems (GIS), satellite imagery and the global positioning system (GI/GIS) in the 50 state governments. The devolution of federal responsibilities and activism by state governments are increasing the role of states in GI/GIS, as well as in the nation's governance in general.  An organizational chart for each state was prepar...

Geographic Names Information System (GNIS) Structures

Data.gov (United States)

Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

The curvature coordinate system

DEFF Research Database (Denmark)

Almegaard, Henrik

2007-01-01

The paper describes a concept for a curvature coordinate system on regular curved surfaces from which faceted surfaces with plane quadrangular facets can be designed. The lines of curvature are used as parametric lines for the curvature coordinate system on the surface. A new conjugate set of lin...

Application of a geographic information system for radiologic emergency response

International Nuclear Information System (INIS)

Best, R.G.; Doyle, J.F.

1995-01-01

A geographic information system (GIS) is a multifunctional analytical tool that can be used to compile available data and derive information. A GIS is a computerized database management system for the capture, storage, retrieval, analysis, and display of spatial data. Maps are the most common type of spatial data, but any type of data that can be referenced by an x-y location or geographic coordinate can be used in a GIS. In a radiological emergency, it is critical that data of all types be rapidly compiled into a common format in order to make accurate observations and informed decisions. Developing a baseline GIS for nuclear facilities would offer a significant incentive for all organizations to contribute to and utilize this powerful data management tool. The system being developed could integrate all elements of emergency planning, from the initial protective actions based on models through the emergency monitoring phase, and finally ending with the complex reentry and recovery phase. Within the Federal Radiological Monitoring and Assessment Center (FRMAC), there is a continuing effort to improve the data management and communication process. To demonstrate the potential of GIS for emergency response, the system has been utilized in interagency FRMAC exercises. An interactive GIS system has been deployed and used to analyze the available spatial data to help determine the impact of a hypothetical radiological release and to develop mitigation plans. For this application, both hardcopy and real-time spatial displays were generated with the GIS. Composite maps with different sizes, scales, and themes were produced to support the exercises

Development of integrated system of spatial coordinates for inputting cartographic information obtained as result of scientific researches at exclusion zone area

International Nuclear Information System (INIS)

Mazur, A.B.; Ermolenko, A.I.; Shaptala, D.V.; Postil, S.D.; Yachmenev, V.V.

1999-01-01

Integrated system of spatial coordinates was developed for modeling of diverse processes occurring in the exclusion zone. Technology of joint use of CAD and geoinformation system was worked out,which resulted in the 'Ukryttia' object fixing to the topographic base in accordance with geographic coordinates, editing of nomenclative sheets of the area adjacent to the ChNPP and renovation of its relief, as well as conversion of the files made in AutoCad to Arc View format files was performed

Transformation procedures in 3D terrestrial coordinate systems

Directory of Open Access Journals (Sweden)

Sedlák Vladimír

2001-12-01

Full Text Available Transformation procedures belong to the main tasks of surveyor working in a field of geodesy, for example in satellite geodesy or astronomical geodesy. It is necessary to know transformation procedures in 3D terrestrial (Earth coordinate systems. Increasingly a dynamic advance growth of application of satellite navigation systems, for example GPS (Global Positioning System into engineering surveying, real estate register and others spheres of applied geodesy and geo-surveying (mine surveying exacts knowledge of these transformation procedures between coordinates in various coordinate systems. These tasks are common for daily work for various practical surveyors too, not only for theoretical scientific working surveyors.Conventional Terrestrial System is 3D coordinate system what is the most important coordinate system in global geodesy. Conventional Terrestrial System is an approximation of the nature coordinate system of the Earth. The origin of this coordinate system is placed in the earth substantial centre of gravity and in the centre of geoid. Conventional Terrestrial System is the Cartesian right-handed coordinate system, i.e. positive one. The Local Astronomical System is 3D coordinate system too and it belongs to an important coordinate system in geodesy from its practical point of view. Many geodetic measurements are realized in this coordinate system. Designation of this coordinate system as astronomical system expresses its sticking to a normal line to an equipotential plane, i.e. to a vertical. Local Astronomical system is the left-handed cartesian coordinate system.Transformation procedures in 3D terrestrial coordinate systems with theory of these systems are presented in the paper. Transformation in the local astronomical coordinate system presents common transformation in a frame of an adjustment of various local geodetic networks. In a case of satellite measurements (GPS, satellite altimetry, etc. transformation between local and

Geographic Names Information System (GNIS) Transportation Features

Data.gov (United States)

Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Geographic Names Information System (GNIS) Historical Features

Data.gov (United States)

Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Geographic Names Information System (GNIS) Admin Features

Data.gov (United States)

Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Geographic Names Information System (GNIS) Hydrography Lines

Data.gov (United States)

Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Geographic Names Information System (GNIS) Cultural Features

Data.gov (United States)

Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Geographic Names Information System (GNIS) Landform Features

Data.gov (United States)

Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Geographic Names Information System (GNIS) Hydrography Points

Data.gov (United States)

Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Geographic Names Information System (GNIS) Community Features

Data.gov (United States)

Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Geographic Names Information System (GNIS) Antarctica Features

Data.gov (United States)

Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Geographic Names Information System (GNIS) for Lousiana, Geographic NAD83, USGS (2007) [GNIS_LA_USGS_2007

Data.gov (United States)

Louisiana Geographic Information Center — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Variationally optimal selection of slow coordinates and reaction coordinates in macromolecular systems

Science.gov (United States)

Noe, Frank

To efficiently simulate and generate understanding from simulations of complex macromolecular systems, the concept of slow collective coordinates or reaction coordinates is of fundamental importance. Here we will introduce variational approaches to approximate the slow coordinates and the reaction coordinates between selected end-states given MD simulations of the macromolecular system and a (possibly large) basis set of candidate coordinates. We will then discuss how to select physically intuitive order paremeters that are good surrogates of this variationally optimal result. These result can be used in order to construct Markov state models or other models of the stationary and kinetics properties, in order to parametrize low-dimensional / coarse-grained model of the dynamics. Deutsche Forschungsgemeinschaft, European Research Council.

Overcurrent protection co-ordination: A modern approach for modern devices

Energy Technology Data Exchange (ETDEWEB)

Hindle, P.J.

1995-12-31

The increasing densities and reduced geographical spans of urban and industrial power systems call for the coordination of more stages of overcurrent protection up to increasingly high fault levels. Applying existing rules of relay coordination, especially for industrial power systems, may make achieving satisfactory coordination difficult. This paper proposes a modern approach to coordination which is able to take advantage of the improved performance of modern protective relays and circuit breakers. The proposed method can handle a mix of new and old equipment and is made most useful when implemented with commonly available spreadsheet software. The suggested approach justifies reduced time margins for relay coordination in many difficult applications. Example calculations are included to illustrate typical considerations for coordinating two digital protection relays where a vacuum circuit breaker is used to clear a downstream fault.

A role based coordination model in agent systems

Institute of Scientific and Technical Information of China (English)

ZHANG Ya-ying; YOU Jin-yuan

2005-01-01

Coordination technology addresses the construction of open, flexible systems from active and independent software agents in concurrent and distributed systems. In most open distributed applications, multiple agents need interaction and communication to achieve their overall goal. Coordination technologies for the Internet typically are concerned with enabling interaction among agents and helping them cooperate with each other.At the same time, access control should also be considered to constrain interaction to make it harmless. Access control should be regarded as the security counterpart of coordination. At present, the combination of coordination and access control remains an open problem. Thus, we propose a role based coordination model with policy enforcement in agent application systems. In this model, coordination is combined with access control so as to fully characterize the interactions in agent systems. A set of agents interacting with each other for a common global system task constitutes a coordination group. Role based access control is applied in this model to prevent unauthorized accesses. Coordination policy is enforced in a distributed manner so that the model can be applied to the open distributed systems such as Intemet. An Internet online auction system is presented as a case study to illustrate the proposed coordination model and finally the performance analysis of the model is introduced.

The coordinate transforming in geography information system

International Nuclear Information System (INIS)

Zhao Xiang; Chen Gang

2003-01-01

The coordinate transforming of geography information system includes two kinds of transforming, map projection and coordinate-transforming. This paper proposed a arithmetic of coordinate-transforming, it implement the transforming between the longitude-latitude coordinate and the screen coordinate and apply it in the GIS. The preferable effect was made. (authors)

Automation technology using Geographic Information System (GIS)

Science.gov (United States)

Brooks, Cynthia L.

1994-01-01

Airport Surface Movement Area is but one of the actions taken to increase the capacity and safety of existing airport facilities. The System Integration Branch (SIB) has designed an integrated system consisting of an electronic moving display in the cockpit, and includes display of taxi routes which will warn controllers and pilots of the position of other traffic and warning information automatically. Although, this system has in test simulation proven to be accurate and helpful; the initial process of obtaining an airport layout of the taxi-routes and designing each of them is a very tedious and time-consuming process. Other methods of preparing the display maps are being researched. One such method is the use of the Geographical Information System (GIS). GIS is an integrated system of computer hardware and software linking topographical, demographic and other resource data that is being referenced. The software can support many areas of work with virtually unlimited information compatibility due to the system's open architecture. GIS will allow us to work faster with increased efficiency and accuracy while providing decision making capabilities. GIS is currently being used at the Langley Research Center with other applications and has been validated as an accurate system for that task. GIS usage for our task will involve digitizing aerial photographs of the topology for each taxi-runway and identifying each position according to its specific spatial coordinates. The information currently being used can be integrated with the GIS system, due to its ability to provide a wide variety of user interfaces. Much more research and data analysis will be needed before this technique will be used, however we are hopeful this will lead to better usage of man-power and technological capabilities for the future.

Modeling, Control and Coordination of Helicopter Systems

CERN Document Server

Ren, Beibei; Chen, Chang; Fua, Cheng-Heng; Lee, Tong Heng

2012-01-01

Modeling, Control and Coordination of Helicopter Systems provides a comprehensive treatment of helicopter systems, ranging from related nonlinear flight dynamic modeling and stability analysis to advanced control design for single helicopter systems, and also covers issues related to the coordination and formation control of multiple helicopter systems to achieve high performance tasks. Ensuring stability in helicopter flight is a challenging problem for nonlinear control design and development. This book is a valuable reference on modeling, control and coordination of helicopter systems,providing readers with practical solutions for the problems that still plague helicopter system design and implementation. Readers will gain a complete picture of helicopters at the systems level, as well as a better understanding of the technical intricacies involved. This book also: Presents a complete picture of modeling, control and coordination for helicopter systems Provides a modeling platform for a general class of ro...

GNIS: Geographic Names Information Systems - All features (2013)

Data.gov (United States)

Earth Data Analysis Center, University of New Mexico — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Balancing Area Coordination: Efficiently Integrating Renewable Energy Into the Grid, Greening the Grid

Energy Technology Data Exchange (ETDEWEB)

Katz, Jessica; Denholm, Paul; Cochran, Jaquelin

2015-06-01

Greening the Grid provides technical assistance to energy system planners, regulators, and grid operators to overcome challenges associated with integrating variable renewable energy into the grid. Coordinating balancing area operation can promote more cost and resource efficient integration of variable renewable energy, such as wind and solar, into power systems. This efficiency is achieved by sharing or coordinating balancing resources and operating reserves across larger geographic boundaries.

application of geographic information system (gis) in industrial land ...

African Journals Online (AJOL)

DEPHILIHS

Land capability index mapping using Geographic Information System (GIS) principles was used for this study. The study was undertaken using Arc View ... Geographic Information Systems (GIS) is one of the best approaches for this type of ..... western segments and to a small extent the east. Some of the available lands are ...

Distributed sensor coordination for advanced energy systems

Energy Technology Data Exchange (ETDEWEB)

Tumer, Kagan [Oregon State Univ., Corvallis, OR (United States). School of Mechanical, Industrial and Manufacturing Engineering

2015-03-12

Motivation: The ability to collect key system level information is critical to the safe, efficient and reliable operation of advanced power systems. Recent advances in sensor technology have enabled some level of decision making directly at the sensor level. However, coordinating large numbers of sensors, particularly heterogeneous sensors, to achieve system level objectives such as predicting plant efficiency, reducing downtime or predicting outages requires sophisticated coordination algorithms. Indeed, a critical issue in such systems is how to ensure the interaction of a large number of heterogenous system components do not interfere with one another and lead to undesirable behavior. Objectives and Contributions: The long-term objective of this work is to provide sensor deployment, coordination and networking algorithms for large numbers of sensors to ensure the safe, reliable, and robust operation of advanced energy systems. Our two specific objectives are to: 1. Derive sensor performance metrics for heterogeneous sensor networks. 2. Demonstrate effectiveness, scalability and reconfigurability of heterogeneous sensor network in advanced power systems. The key technical contribution of this work is to push the coordination step to the design of the objective functions of the sensors, allowing networks of heterogeneous sensors to be controlled. By ensuring that the control and coordination is not specific to particular sensor hardware, this approach enables the design and operation of large heterogeneous sensor networks. In addition to the coordination coordination mechanism, this approach allows the system to be reconfigured in response to changing needs (e.g., sudden external events requiring new responses) or changing sensor network characteristics (e.g., sudden changes to plant condition). Impact: The impact of this work extends to a large class of problems relevant to the National Energy Technology Laboratory including sensor placement, heterogeneous sensor

The Geographic Information Grid System Based on Mobile Agent

Institute of Scientific and Technical Information of China (English)

无

2006-01-01

We analyze the deficiencies of current application systems, and discuss the key requirements of distributed Geographic Information service (GIS). We construct the distributed GIS on grid platform. Considering the flexibility and efficiency, we integrate the mobile agent technology into the system. We propose a new prototype system, the Geographic Information Grid System (GIGS) based on mobile agent. This system has flexible services and high performance, and improves the sharing of distributed resources. The service strategy of the system and the examples are also presented.

Using geographic information systems

International Nuclear Information System (INIS)

Winsor, R.W.

1997-01-01

A true Geographic Information System (GIS) is a computer mapping system with spatial analysis ability and cartographic accuracy that will offer many different projections. GIS has evolved to become an everyday tool for a wide range of users including oil companies, worldwide. Other systems are designed to allow oil and gas companies to keep their upstream data in the same format. Among these are the Public Petroleum Data Model developed by Gulf Canada, Digitech and Applied Terravision Systems of Calgary, the system developed and marketed by the Petrotechnical Open Software Corporation in the United States, and the Mercury projects by IBM. These have been developed in an effort to define an industry standard. The advantages and disadvantages of open and closed systems were discussed. Factors to consider when choosing a GIS system such as overall performance, area of use and query complexity, were reviewed. 3 figs

Plasticity of intermediate mechanics students’ coordinate system choice

Directory of Open Access Journals (Sweden)

Eleanor C. Sayre

2008-11-01

Full Text Available We investigate the interplay between mathematics and physics resources in intermediate mechanics students. In the mechanics course, the selection and application of coordinate systems is a consistent thread. At the University of Maine, students often start the course with a strong preference to use Cartesian coordinates, in accordance with their prior physics and mathematics classes. In small-group interviews and in homework help sessions, we ask students to define a coordinate system and set up the equations of motion for a simple pendulum for which polar coordinates are more appropriate. We analyze video data from several encounters using a combination of Process/Object theory and Resource Theory. We find that students sometimes persist in using an inappropriate Cartesian system. Furthermore, students often derive (rather than recall the details of the polar coordinate system, indicating that their knowledge is far from solid. To describe our work more precisely, we define a scale of plasticity and several heuristics for defining resources and their plasticity.

Principles of logic and the use of digital geographic information systems

Science.gov (United States)

Robinove, Charles Joseph

1986-01-01

Digital geographic information systems allow many different types of data to be spatially and statistically analyzed. Logical operations can be performed on individual or multiple data planes by algorithms that can be implemented in computer systems. Users and creators of the systems should fully understand these operations. This paper describes the relationships of layers and features in geographic data bases and the principles of logic that can be applied by geographic information systems and suggests that a thorough knowledge of the data that are entered into a geographic data base and of the logical operations will produce results that are most satisfactory to the user. Methods of spatial analysis are reduced to their primitive logical operations and explained to further such understanding.

Insulation coordination workstation for AC and DC substations

International Nuclear Information System (INIS)

Booth, R.R.; Hileman, A.R.

1990-01-01

The Insulation Coordination Workstation was designed to aid the substation design engineer in the insulation coordination process. The workstation utilizes state of the art computer technology to present a set of tools necessary for substation insulation coordination, and to support the decision making process for all aspects of insulation coordination. The workstation is currently being developed for personal computers supporting OS/2 Presentation Manager. Modern Computer-Aided Software Engineering (CASE) technology was utilized to create an easily expandable framework which currently consists of four modules, each accessing a central application database. The heart of the workstation is a library of user-friendly application programs for the calculation of important voltage stresses used for the evaluation of insulation coordination. The Oneline Diagram is a graphic interface for data entry into the EPRI distributed EMTP program, which allows the creation of complex systems on the CRT screen using simple mouse clicks and keyboard entries. Station shielding is graphically represented in the Geographic Viewport using a three-dimensional substation model, and the interactive plotting package allows plotting of EPRI EMTP output results on the CRT screen, printer, or pen plotter. The Insulation Coordination Workstation was designed by Advanced Systems Technology (AST), a division of ABB Power Systems, Inc., and sponsored by the Electric Power Research Institute under RP 2323-5, AC/DC Insulation Coordination Workstation

Application of geographical information systems for the optimal location of a commercial network

Directory of Open Access Journals (Sweden)

Vicente Rodríguez

2017-07-01

Full Text Available Purpose - The purpose of this paper is to study the optimization of the geographical location of a network of points of sale, so that each retailer can have access to a potential geographic market. In addition, the authors study the importance of the distance variable in the commercial viability of a point of sale and a network of points of sale, analysing if the best location for each point (local optimum is always the best location for the whole (global optimum. Design/methodology/approach - Location-allocation models are applied using p-median algorithms and spatial competition maximization to analyse the actual journeys of 64,740 car buyers in 1240 postal codes using a geographic information system (GIS and geomarketing techniques. Findings - The models show that the pursuit of individual objectives by each concessionaire over the collective provides poorer results for the whole network of points of sale when compared to coordinated competition. The solutions provided by the models considering geographic and marketing criteria permit a reduction in the length of journeys made by the buyers. GIS allows the optimal control of market demand coverage through the collaborative strategies of the supplying retailers, in this case, car dealerships. Originality/value - The paper contributes to the joint research of geography and marketing from a theoretical and practical point of view. The main contribution is the use of information on actual buyer journeys for the optimal location of a network of points of sale. This research also contributes to the analysis of the correlation between the optimum local and optimum global locations of a commercial network and is a pioneering work in the application of these models to the automotive sector in the territorial area of the study.

The Role of Geographical Indication in Supporting Food Safety: A not Taken for Granted Nexus

Science.gov (United States)

2014-01-01

The paper focuses on the role of geographical indication in supporting strategies of food safety. Starting from the distinction between generic and specific quality, the article analyses the main factors influencing food safety in cases of geographical indication products, by stressing the importance of traceability systems and biodiversity in securing generic and specific quality. In the second part, the paper investigates the coordination problems behind a designation of origin and conditions to foster an effective collective action, a prerequisite to grant food safety through geographical indications. PMID:27800417

Development of the OCRWM transportation geographic information system

International Nuclear Information System (INIS)

Peck, M. III; McGuinn, E.J.; Osborne, J.W.

1995-01-01

The U.S. Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM) is responsible for disposing of the nation's high-level radioactive waste. Current plans call for OCRWM to ship commercial spent nuclear fuel (SNF) from 77 individual reactor sites to a central facility for disposal. The Transportation Geographic Information System (TGIS) is a valuable tool in planning for the SNF shipments and communicating with the public regarding the shipments. The TGIS consists of a geographic information system (GIS) combined with a set of databases that provide data on specific geographic areas, transportation networks, and point locations. Planning activities may include analyzing possible routing options or criteria, highlighting route-specific attributes such as the location of culturally sensitive areas, providing route-specific data such as accident statistics, determining the affected population density along a route to support risk assessment activities, or providing emergency response information such as responder locations and hospitals along the proposed routes. The TGIS is a useful communication tool in helping to address the public's concern over how the shipments will be managed, particularly in the area of route selection by providing graphic portrayals of potential routes in their true geographic contexts

Developing Trainee Teacher Practice with Geographical Information Systems (GIS)

Science.gov (United States)

Walshe, Nicola

2017-01-01

There is general agreement that geographical information systems (GIS) have a place within the geography classroom; they offer the potential to support geographical learning, exploring real-world problems through student-centred learning, and developing spatial thinking. Despite this, teachers often avoid engaging with GIS and research suggests…

Anatomic breast coordinate system for mammogram analysis

DEFF Research Database (Denmark)

Karemore, Gopal; Brandt, S.; Karssemeijer, N.

2011-01-01

was represented by geodesic distance (s) from nipple and parametric angle (¿) as shown in figure 1. The scoring technique called MTR (mammographic texture resemblance marker) used this breast coordinate system to extract Gaussian derivative features. The features extracted using the (x,y) and the curve......Purpose Many researchers have investigated measures also other than density in the mammogram such as measures based on texture to improve breast cancer risk assessment. However, parenchymal texture characteristics are highly dependent on the orientation of vasculature structure and fibrous tissue...... methodologies as seen from table 2 in given temporal study. Conclusion The curve-linear anatomical breast coordinate system facilitated computerized analysis of mammograms. The proposed coordinate system slightly improved the risk segregation by Mammographic Texture Resemblance and minimized the geometrical...

GNIS: Geographic Names Information Systems - All features

Data.gov (United States)

Earth Data Analysis Center, University of New Mexico — The Geographic Names Information System (GNIS) actively seeks data from and partnerships with Government agencies at all levels and other interested organizations....

Integrationof Remote Sensing and Geographic information system in Ground Water Quality Assessment and Management

Science.gov (United States)

Shakak, N.

2015-04-01

Spatial variations in ground water quality in the Khartoum state, Sudan, have been studied using geographic information system (GIS) and remote sensing technique. Gegraphical informtion system a tool which is used for storing, analyzing and displaying spatial data is also used for investigating ground water quality information. Khartoum landsat mosac image aquired in 2013was used, Arc/Gis software applied to extract the boundary of the study area, the image was classified to create land use/land cover map. The land use map,geological and soil map are used for correlation between land use , geological formations, and soil types to understand the source of natural pollution that can lower the ground water quality. For this study, the global positioning system (GPS), used in the field to identify the borehole location in a three dimentional coordinate (Latitude, longitude, and altitude), water samples were collected from 156 borehole wells, and analyzed for physico-chemical parameters like electrical conductivity, Total dissolved solid,Chloride, Nitrate, Sodium, Magnisium, Calcium,and Flouride, using standard techniques in the laboratory and compared with the standards.The ground water quality maps of the entire study area have been prepared using spatial interpolation technique for all the above parameters.then the created maps used to visualize, analyze, and understand the relationship among the measured points. Mapping was coded for potable zones, non-potable zones in the study area, in terms of water quality sutability for drinking water and sutability for irrigation. In general satellite remote sensing in conjunction with geographical information system (GIS) offers great potential for water resource development and management.

[Coupling coordinated development of ecological-economic system in Loess Plateau].

Science.gov (United States)

Zhang, Qing-Feng; Wu, Fa-Qi; Wang, Li; Wang, Jian

2011-06-01

Based on system theory, a coupling coordinated development model of ecological-economic system in Loess Plateau was established, and the evaluation criteria and basic types of the coordinated development of the ecological-economic system were proposed. The county-level coupling coordinated development of the ecological-economic system was also discussed, based on the local characteristics. The interactions between the ecological and economic systems in Loess Plateau could be divided into four stages, i.e., seriously disordered development stage, mild-disordered development stage, low-level coordinated development stage, and high level well-coordinated development stage. At each stage, there existed a cyclic process of profit and loss-antagonist-running-dominant-synchronous development. The coupling development degree of the ecological-economic system in Loess Plateau was overall at a lower level, being about 62.7% of the counties at serious disorder, 30.1% of the counties at mild disorder, and 7.1% of the counties at low but coordinated level. The coupling development degree based on the model established in this study could better reflect the current social-economic and ecological environment situations, especially the status of coordination. To fully understand the coupling of ecological-economic system and to adopt appropriate development mode would be of significance to promote the county-level coordinated development in Loess Plateau.

Coordinating Work with Groupware

DEFF Research Database (Denmark)

Pors, Jens Kaaber; Simonsen, Jesper

2003-01-01

One important goal of employing groupware is to make possible complex collaboration between geographically distributed groups. This requires a dual transformation of both technology and work practice. The challenge is to re­duce the complexity of the coordination work by successfully inte....... Using the CSCW frame­work of coordination mechanisms, we have elicited six general factors influencing the integration of the groupware application in two situations....

A Systems Perspective on Volunteered Geographic Information

Directory of Open Access Journals (Sweden)

Victoria Fast

2014-12-01

Full Text Available Volunteered geographic information (VGI is geographic information collected by way of crowdsourcing. However, the distinction between VGI as an information product and the processes that create VGI is blurred. Clearly, the environment that influences the creation of VGI is different than the information product itself, yet most literature treats them as one and the same. Thus, this research is motivated by the need to formalize and standardize the systems that support the creation of VGI. To this end, we propose a conceptual framework for VGI systems, the main components of which—project, participants, and technical infrastructure—form an environment conducive to the creation of VGI. Drawing on examples from OpenStreetMap, Ushahidi, and RinkWatch, we illustrate the pragmatic relevance of these components. Applying a system perspective to VGI allows us to better understand the components and functionality needed to effectively create VGI.

Modeling and simulation of virtual human's coordination based on multi-agent systems

Science.gov (United States)

Zhang, Mei; Wen, Jing-Hua; Zhang, Zu-Xuan; Zhang, Jian-Qing

2006-10-01

The difficulties and hotspots researched in current virtual geographic environment (VGE) are sharing space and multiusers operation, distributed coordination and group decision-making. The theories and technologies of MAS provide a brand-new environment for analysis, design and realization of distributed opening system. This paper takes cooperation among virtual human in VGE which multi-user participate in as main researched object. First we describe theory foundation truss of VGE, and present the formalization description of Multi-Agent System (MAS). Then we detailed analyze and research arithmetic of collectivity operating behavior learning of virtual human based on best held Genetic Algorithm(GA), and establish dynamics action model which Multi-Agents and object interact dynamically and colony movement strategy. Finally we design a example which shows how 3 evolutional Agents cooperate to complete the task of colony pushing column box, and design a virtual world prototype of virtual human pushing box collectively based on V-Realm Builder 2.0, moreover we make modeling and dynamic simulation with Simulink 6.

U.S.-Mexico Border Geographic Information System

Science.gov (United States)

Parcher, Jean W.

2008-01-01

Geographic Information Systems (GIS) and the development of extensive geodatabases have become invaluable tools for addressing a variety of contemporary societal issues and for making predictions about the future. The United States-Mexico Geographic Information System (USMX-GIS) is based on fundamental datasets that are produced and/or approved by the national geography agencies of each country, the U.S. Geological Survey (USGS) and the Instituto Nacional de Estadistica Y Geografia (INEGI) of Mexico, and the International Boundary and Water Commission (IBWC). The data are available at various scales to allow both regional and local analysis. The USGS and the INEGI have an extensive history of collaboration for transboundary mapping including exchanging digital technology and developing methods for harmonizing seamless national level geospatial datasets for binational environmental monitoring, urban growth analysis, and other scientific applications.

Review of Current Geographic Information Systems Technology for TxDOT Pavement Management Information System

Science.gov (United States)

1998-05-01

A geographic information system (GIS) is a tool for effectively managing and analyzing tremendous amounts of geographic information. It employs the essential principle of geography to organize in formation and express relationships between real-world...

Development of accurate standardized algorithms for conversion between SRP grid coordinates and latitude/longitude

International Nuclear Information System (INIS)

Looney, B.B.; Marsh, J.T. Jr.; Hayes, D.W.

1987-01-01

The Savannah Rive Plant (SRP) is a nuclear production facility operated by E.I. du Pont de Nemours and Co. for the United States Department of Energy. SRP is located along the Savannah River in South Carolina. Construction of SRP began in the early 1950's. At the time the plant was built, a local coordinate system was developed to assist in defining the locations of plant facilities. Over the years, large quantities of data have been developed using ''SRP Coordinates.'' These data include: building locations, plant boundaries, environmental sampling locations, waste disposal area locations, and a wide range of other geographical information. Currently, staff persons at SRP are organizing these data into automated information systems to allow more rapid, more robust and higher quality interpretation, interchange and presentation of spatial data. A key element in this process is the ability to incorporate outside data bases into the systems, as well as to share SRP data with interested organizations outside as SRP. Most geographical information outside of SRP is organized using latitude and longitude. Thus, straightforward, accurate and consistent algorithms to convert SRP Coordinates to/from latitude and longitude are needed. Appropriate algorithms are presented in this document

A Critical Review of the Integration of Geographic Information System and Building Information Modelling at the Data Level

Directory of Open Access Journals (Sweden)

Junxiang Zhu

2018-02-01

Full Text Available The benefits brought by the integration of Building Information Modelling (BIM and Geographic Information Systems (GIS are being proved by more and more research. The integration of the two systems is difficult for many reasons. Among them, data incompatibility is the most significant, as BIM and GIS data are created, managed, analyzed, stored, and visualized in different ways in terms of coordinate systems, scope of interest, and data structures. The objective of this paper is to review the relevant research papers to (1 identify the most relevant data models used in BIM/GIS integration and understand their advantages and disadvantages; (2 consider the possibility of other data models that are available for data level integration; and (3 provide direction on the future of BIM/GIS data integration.

Geographic information system planning and monitoring best ...

African Journals Online (AJOL)

Poor urbanization policies, inefficient planning and monitoring technologies are evident. The consequences include some of the worst types of environmental hazards. Best urbanization practices require integrated planning approaches that result in environmental conservation. Geographic Information systems (GIS) provide ...

Geographic Information Systems and Web Page Development

Science.gov (United States)

Reynolds, Justin

2004-01-01

The Facilities Engineering and Architectural Branch is responsible for the design and maintenance of buildings, laboratories, and civil structures. In order to improve efficiency and quality, the FEAB has dedicated itself to establishing a data infrastructure based on Geographic Information Systems, GIS. The value of GIS was explained in an article dating back to 1980 entitled "Need for a Multipurpose Cadastre" which stated, "There is a critical need for a better land-information system in the United States to improve land-conveyance procedures, furnish a basis for equitable taxation, and provide much-needed information for resource management and environmental planning." Scientists and engineers both point to GIS as the solution. What is GIS? According to most text books, Geographic Information Systems is a class of software that stores, manages, and analyzes mapable features on, above, or below the surface of the earth. GIS software is basically database management software to the management of spatial data and information. Simply put, Geographic Information Systems manage, analyze, chart, graph, and map spatial information. GIS can be broken down into two main categories, urban GIS and natural resource GIS. Further still, natural resource GIS can be broken down into six sub-categories, agriculture, forestry, wildlife, catchment management, archaeology, and geology/mining. Agriculture GIS has several applications, such as agricultural capability analysis, land conservation, market analysis, or whole farming planning. Forestry GIs can be used for timber assessment and management, harvest scheduling and planning, environmental impact assessment, and pest management. GIS when used in wildlife applications enables the user to assess and manage habitats, identify and track endangered and rare species, and monitor impact assessment.

47 CFR 25.272 - General inter-system coordination procedures.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false General inter-system coordination procedures. 25.272 Section 25.272 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES SATELLITE COMMUNICATIONS Technical Operations § 25.272 General inter-system coordination...

Human-geographical concept of the regional geodemographic system

Directory of Open Access Journals (Sweden)

Kateryna Sehida

2017-10-01

Full Text Available The synergetic analysis of geodemographic researches indicates that they can be solved with use of modern technologies of management. according to the theory of a sotsioaktogenez, for this purpose it is necessary to define and formulate accurately the purpose of future phase transition, to construct consistent system of the purposes taking into account own and provided resources, to create executive system, effective from the point of view of optimum use of the available methods (technologies and means of activity, and to control and analyze obtaining result. The analysis of results of social management demands the quantitative description and comparison of real result with his expected model (purpose. The offered concept of geodemographic system of the region on the basis of dissipative structures which treats people, groups of people, society is aimed at the development and functioning of the studied system where the special role belongs to implementation of administrative decisions. In article it is covered the generalized structure of the concept, it is revealed her the purpose, an object subject area. It is defined public and spatial localization of a research, in particular within regional, region and local communities. It is identified geodemographic process as composite human and geographical process as sotsioaktogenez (with determination of stages of motivation, system of the purposes, executive system and result from a line item of society and a family as self-development and self-organization (with determination of the internal and external factors supporting and evolutionary resources, mechanisms as process (information exchange, external and internal adaptation. Methodological approaches (geographical, system, synergy, information, historical, research techniques (the analysis of system indices, simulation of a path of development, the component analysis and evaluation and prognostic simulation are opened. Technological procedures

DEVELOPMENT OF A GEOGRAPHIC VISUALIZATION AND COMMUNICATIONS SYSTEMS (GVCS) FOR MONITORING REMOTE VEHICLES

Energy Technology Data Exchange (ETDEWEB)

COLEMAN, P.; DUNCAN, M.; DURFEE, R.C.; GOELTZ, R; HARRISON, G.; HODGSON, M.E.; KOOK, M.; MCCLAIN, S.

1998-03-30

The purpose of this project is to integrate a variety of geographic information systems capabilities and telecommunication technologies for potential use in geographic network and visualization applications. The specific technical goals of the project were to design, develop, and simulate the components of an audio/visual geographic communications system to aid future real-time monitoring, mapping and managing of transport vehicles. The system components of this feasibility study are collectively referred to as a Geographic Visualization and Communications System (GVCS). State-of-the-art techniques will be used and developed to allow both the vehicle operator and network manager to monitor the location and surrounding environment of a transport vehicle during shipment.

Geographic Names Information System (GNIS) - USGS National Map Downloadable Data Collection

Data.gov (United States)

U.S. Geological Survey, Department of the Interior — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Regular coordinate systems for Schwarzschild and other spherical spacetimes

OpenAIRE

Martel, Karl; Poisson, Eric

2000-01-01

The continuation of the Schwarzschild metric across the event horizon is almost always (in textbooks) carried out using the Kruskal-Szekeres coordinates, in terms of which the areal radius r is defined only implicitly. We argue that from a pedagogical point of view, using these coordinates comes with several drawbacks, and we advocate the use of simpler, but equally effective, coordinate systems. One such system, introduced by Painleve and Gullstrand in the 1920's, is especially simple and pe...

Coordinate metrology accuracy of systems and measurements

CERN Document Server

Sładek, Jerzy A

2016-01-01

This book focuses on effective methods for assessing the accuracy of both coordinate measuring systems and coordinate measurements. It mainly reports on original research work conducted by Sladek’s team at Cracow University of Technology’s Laboratory of Coordinate Metrology. The book describes the implementation of different methods, including artificial neural networks, the Matrix Method, the Monte Carlo method and the virtual CMM (Coordinate Measuring Machine), and demonstrates how these methods can be effectively used in practice to gauge the accuracy of coordinate measurements. Moreover, the book includes an introduction to the theory of measurement uncertainty and to key techniques for assessing measurement accuracy. All methods and tools are presented in detail, using suitable mathematical formulations and illustrated with numerous examples. The book fills an important gap in the literature, providing readers with an advanced text on a topic that has been rapidly developing in recent years. The book...

Wireless coordinated multicell systems architectures and precoding designs

CERN Document Server

Nguyen, Duy H N

2014-01-01

This SpringerBrief discusses the current research on coordinated multipoint transmission/reception (CoMP) in wireless multi-cell systems. This book analyzes the structure of the CoMP precoders and the message exchange mechanism in the CoMP system in order to reveal the advantage of CoMP. Topics include interference management in wireless cellular networks, joint signal processing, interference coordination, uplink and downlink precoding and system models. After an exploration of the motivations and concepts of CoMP, the authors present the architectures of a CoMP system. Practical implementati

Sinusoidal error perturbation reveals multiple coordinate systems for sensorymotor adaptation.

Science.gov (United States)

Hudson, Todd E; Landy, Michael S

2016-02-01

A coordinate system is composed of an encoding, defining the dimensions of the space, and an origin. We examine the coordinate encoding used to update motor plans during sensory-motor adaptation to center-out reaches. Adaptation is induced using a novel paradigm in which feedback of reach endpoints is perturbed following a sinewave pattern over trials; the perturbed dimensions of the feedback were the axes of a Cartesian coordinate system in one session and a polar coordinate system in another session. For center-out reaches to randomly chosen target locations, reach errors observed at one target will require different corrections at other targets within Cartesian- and polar-coded systems. The sinewave adaptation technique allowed us to simultaneously adapt both dimensions of each coordinate system (x-y, or reach gain and angle), and identify the contributions of each perturbed dimension by adapting each at a distinct temporal frequency. The efficiency of this technique further allowed us to employ perturbations that were a fraction the size normally used, which avoids confounding automatic adaptive processes with deliberate adjustments made in response to obvious experimental manipulations. Subjects independently corrected errors in each coordinate in both sessions, suggesting that the nervous system encodes both a Cartesian- and polar-coordinate-based internal representation for motor adaptation. The gains and phase lags of the adaptive responses are not readily explained by current theories of sensory-motor adaptation. Copyright © 2015 Elsevier Ltd. All rights reserved.

Study on portable optical 3D coordinate measuring system

Science.gov (United States)

Ren, Tongqun; Zhu, Jigui; Guo, Yinbiao

2009-05-01

A portable optical 3D coordinate measuring system based on digital Close Range Photogrammetry (CRP) technology and binocular stereo vision theory is researched. Three ultra-red LED with high stability is set on a hand-hold target to provide measuring feature and establish target coordinate system. Ray intersection based field directional calibrating is done for the intersectant binocular measurement system composed of two cameras by a reference ruler. The hand-hold target controlled by Bluetooth wireless communication is free moved to implement contact measurement. The position of ceramic contact ball is pre-calibrated accurately. The coordinates of target feature points are obtained by binocular stereo vision model from the stereo images pair taken by cameras. Combining radius compensation for contact ball and residual error correction, object point can be resolved by transfer of axes using target coordinate system as intermediary. This system is suitable for on-field large-scale measurement because of its excellent portability, high precision, wide measuring volume, great adaptability and satisfying automatization. It is tested that the measuring precision is near to +/-0.1mm/m.

Crime Mapping and Geographical Information Systems in Crime Analysis

OpenAIRE

Dağlar, Murat; Argun, Uğur

2016-01-01

As essential apparatus in crime analysis, crime mapping and Geographical Information Systems (GIS) are being progressively more accepted by police agencies. Development in technology and the accessibility of geographic data sources make it feasible for police departments to use GIS and crime mapping. GIS and crime mapping can be utilized as devices to discover reasons contributing to crime, and hence let law enforcement agencies proactively take action against the crime problems before they b...

The research on data organization technology in the highway geographic information system

Science.gov (United States)

Tian, Zhihui; Wu, Fang; Zeng, Yuhuai

2008-10-01

Data are the basis of GIS. It has direct impact on the efficiency and function of a Highway Geographic Information System (HGIS), because of the characteristics of data model and data organization of the traffic geographic information system such as spatial property, multi-path network, linearity. This paper discussed the data property of HGIS, studied and presented the HGIS spatial data on multi-source and model. Also, it described and verified highway geographical feature of special subject data's linearity, dynamic and multiple-path network property in HGIS.

Quantum field theory in stationary coordinate systems

International Nuclear Information System (INIS)

Pfautsch, J.D.

1981-01-01

Quantum field theory is examined in stationary coordinate systems in Minkowski space. Preliminary to quantization of the scalar field, all of the possible stationary coordinate systems in flat spacetime are classified and explicitly constructed. Six distinct classes of such systems are found. Of these six, three have (identical) event horizons associated with them and five have Killing horizons. Two classes have distinct Killing and event horizons, with an intervening region analogous to the ergosphere in rotating black holes. Particular representatives of each class are selected for subsequent use in the quantum field theory. The scalar field is canonically quantized and a vacuum defined in each of the particular coordinate systems chosen. The vacuum states can be regarded as adapted to the six classes of stationary motions. There are only two vacuum states found, the Minkowski vacuum in those coordinate systems without event horizons and the Fulling vacuum in those with event horizons. The responses of monopole detectors traveling along stationary world lines are calculated in both the Minkowski and Fulling vacuums. The responses for each class of motions are distinct from those for every other class. A vacuum defined by the response of a detector must therefore not be equivalent in general to a vacuum defined by canonical quantization. Quantization of the scalar field within a rotating wedge is examined. It has not been possible to construct mode functions satisfying appropriate boundary conditions on the surface of the wedge. The asymptotic form of the renormalized stress tensor near the surfaces had been calculated and is found to include momentum terms which represent a circulation of energy within the wedge

Groundwater quality mapping using geographic information system ...

African Journals Online (AJOL)

Spatial variations in ground water quality in the corporation area of Gulbarga City located in the northern part of Karnataka State, India, have been studied using geographic information system (GIS) technique. GIS, a tool which is used for storing, analyzing and displaying spatial data is also used for investigating ground ...

On the use of polar coordinate system in the projective graphic drawings

Directory of Open Access Journals (Sweden)

Ivashchenko Andrey Viktorovich

2016-11-01

Full Text Available Projective graphics is a polyhedra simulation method, which is based on the use of trace diagrams of initial polyhedron. Previously developed computer software allows using Cartesian coordinates. In some cases it is advisable to use polar coordinate system for description of projective graphics drawings. Using the example of icosahedron the authors analyzed the advantages of using projective graphics drawings in the polar coordinate system. The transition to the polar coordinate system is a tool that allows using certain patterns of projective graphics drawings in the process of calculation. When using polar coordinate system the search of Polar correspondence for the directs is simplified. In order to analyze the two lines in the polar coordinate system it is enough to compare the corresponding coefficients of the equations of these lines. The authors consider a diagram of the icosahedron in polar coordinates, and a corresponding fragment of calculation program in the Mathematica system. Some examples of forming based on icosahedrons are offered. Optimization of computer programs using polar coordinate system will simplifies the calculations of projective graphics drawings, accelerates the process of constructing three-dimensional models, which expand the possibilities of selecting original solutions. Finally, the authors conclude that it is appropriate to use the polar coordinate system only in the construction of projective graphics diagrams of the planes system having rich symmetry. All Platonic and Archimedean solids, Catalan solid possess this property.

Basic mapping principles for visualizing cancer data using Geographic Information Systems (GIS).

Science.gov (United States)

Brewer, Cynthia A

2006-02-01

Maps and other data graphics may play a role in generating ideas and hypotheses at the beginning of a project. They are useful as part of analyses for evaluating model results and then at the end of a project when researchers present their results and conclusions to varied audiences, such as their local research group, decision makers, or a concerned public. Cancer researchers are gaining skill with geographic information system (GIS) mapping as one of their many tools and are broadening the symbolization approaches they use for investigating and illustrating their data. A single map is one of many possible representations of the data, so making multiple maps is often part of a complete mapping effort. Symbol types, color choices, and data classing each affect the information revealed by a map and are best tailored to the specific characteristics of data. Related data can be examined in series with coordinated classing and can also be compared using multivariate symbols that build on the basic rules of symbol design. Informative legend wording and setting suitable map projections are also basic to skilled mapmaking.

KBGIS-2: A knowledge-based geographic information system

Science.gov (United States)

Smith, T.; Peuquet, D.; Menon, S.; Agarwal, P.

1986-01-01

The architecture and working of a recently implemented knowledge-based geographic information system (KBGIS-2) that was designed to satisfy several general criteria for the geographic information system are described. The system has four major functions that include query-answering, learning, and editing. The main query finds constrained locations for spatial objects that are describable in a predicate-calculus based spatial objects language. The main search procedures include a family of constraint-satisfaction procedures that use a spatial object knowledge base to search efficiently for complex spatial objects in large, multilayered spatial data bases. These data bases are represented in quadtree form. The search strategy is designed to reduce the computational cost of search in the average case. The learning capabilities of the system include the addition of new locations of complex spatial objects to the knowledge base as queries are answered, and the ability to learn inductively definitions of new spatial objects from examples. The new definitions are added to the knowledge base by the system. The system is currently performing all its designated tasks successfully, although currently implemented on inadequate hardware. Future reports will detail the performance characteristics of the system, and various new extensions are planned in order to enhance the power of KBGIS-2.

A geographic information system-based 3D city estate modeling and simulation system

Science.gov (United States)

Chong, Xiaoli; Li, Sha

2015-12-01

This paper introduces a 3D city simulation system which is based on geographic information system (GIS), covering all commercial housings of the city. A regional- scale, GIS-based approach is used to capture, describe, and track the geographical attributes of each house in the city. A sorting algorithm of "Benchmark + Parity Rate" is developed to cluster houses with similar spatial and construction attributes. This system is applicable for digital city modeling, city planning, housing evaluation, housing monitoring, and visualizing housing transaction. Finally, taking Jingtian area of Shenzhen as an example, the each unit of 35,997 houses in the area could be displayed, tagged, and easily tracked by the GIS-based city modeling and simulation system. The match market real conditions well and can be provided to house buyers as reference.

Using GIS to check co-ordinates of genebank accessions

NARCIS (Netherlands)

Hijmans, R.J.; Schreuder, M.; Cruz, de la J.; Guarino, L.

1999-01-01

The geographic co-ordinates of the locations where germplasm accessions have been collected are usually documented in genebank databases. However, the co-ordinate data are often incomplete and may contain errors. This paper describes procedures to check for errors, to determine the cause of these

Coordination Approaches for Complex Software Systems

NARCIS (Netherlands)

Bosse, T.; Hoogendoorn, M.; Treur, J.

2006-01-01

This document presents the results of a collaboration between the Vrije Universiteit Amsterdam, Department of Artificial Intelligence and Force Vision to investigate coordination approaches for complex software systems. The project was funded by Force Vision.

National Carbon Sequestration Database and Geographic Information System (NatCarb)

Energy Technology Data Exchange (ETDEWEB)

Kenneth Nelson; Timothy Carr

2009-03-31

This annual and final report describes the results of the multi-year project entitled 'NATional CARBon Sequestration Database and Geographic Information System (NatCarb)' (http://www.natcarb.org). The original project assembled a consortium of five states (Indiana, Illinois, Kansas, Kentucky and Ohio) in the midcontinent of the United States (MIDCARB) to construct an online distributed Relational Database Management System (RDBMS) and Geographic Information System (GIS) covering aspects of carbon dioxide (CO{sub 2}) geologic sequestration. The NatCarb system built on the technology developed in the initial MIDCARB effort. The NatCarb project linked the GIS information of the Regional Carbon Sequestration Partnerships (RCSPs) into a coordinated regional database system consisting of datasets useful to industry, regulators and the public. The project includes access to national databases and GIS layers maintained by the NatCarb group (e.g., brine geochemistry) and publicly accessible servers (e.g., USGS, and Geography Network) into a single system where data are maintained and enhanced at the local level, but are accessed and assembled through a single Web portal to facilitate query, assembly, analysis and display. This project improves the flow of data across servers and increases the amount and quality of available digital data. The purpose of NatCarb is to provide a national view of the carbon capture and storage potential in the U.S. and Canada. The digital spatial database allows users to estimate the amount of CO{sub 2} emitted by sources (such as power plants, refineries and other fossil-fuel-consuming industries) in relation to geologic formations that can provide safe, secure storage sites over long periods of time. The NatCarb project worked to provide all stakeholders with improved online tools for the display and analysis of CO{sub 2} carbon capture and storage data through a single website portal (http://www.natcarb.org/). While the external

77 FR 69899 - Public Conference on Geographic Information Systems (GIS) in Transportation Safety

Science.gov (United States)

2012-11-21

... NATIONAL TRANSPORTATION SAFETY BOARD Public Conference on Geographic Information Systems (GIS) in... Geographic Information Systems (GIS) in transportation safety on December 4-5, 2012. GIS is a rapidly... visualization of data. The meeting will bring researchers and practitioners in transportation safety and GIS...

Directional Overcurrent Relays Coordination Problems in Distributed Generation Systems

Directory of Open Access Journals (Sweden)

Jakub Ehrenberger

2017-09-01

Full Text Available This paper proposes a new approach to the distributed generation system protection coordination based on directional overcurrent protections with inverse-time characteristics. The key question of protection coordination is the determination of correct values of all inverse-time characteristics coefficients. The coefficients must be correctly chosen considering the sufficiently short tripping times and the sufficiently long selectivity times. In the paper a new approach to protection coordination is designed, in which not only some, but all the required types of short-circuit contributions are taken into account. In radial systems, if the pickup currents are correctly chosen, protection coordination for maximum contributions is enough to ensure selectivity times for all the required short-circuit types. In distributed generation systems, due to different contributions flowing through the primary and selective protections, coordination for maximum contributions is not enough, but all the short-circuit types must be taken into account, and the protection coordination becomes a complex problem. A possible solution to the problem, based on an appropriately designed optimization, has been proposed in the paper. By repeating a simple optimization considering only one short-circuit type, the protection coordination considering all the required short-circuit types has been achieved. To show the importance of considering all the types of short-circuit contributions, setting optimizations with one (the highest and all the types of short-circuit contributions have been performed. Finally, selectivity time values are explored throughout the entire protected section, and both the settings are compared.

Micro practices of coordination based on complex adaptive systems: user needs and strategies for coordinating public health in Denmark.

Science.gov (United States)

Terkildsen, Morten Deleuran; Wittrup, Inge; Burau, Viola

2015-01-01

Many highly formalised approaches to coordination poorly fit public health and recent studies call for coordination based on complex adaptive systems. Our contribution is two-fold. Empirically, we focus on public health, and theoretically we build on the patient perspective and treat coordination as a process of contingent, two-level negotiations of user needs. The paper draws on the concept of user needs-based coordination and sees coordination as a process, whereby needs emerging from the life world of the user are made amenable to the health system through negotiations. The analysis is based on an explorative case study of a health promotion initiative in Denmark. It adopts an anthropological qualitative approach and uses a range of qualitative data. The analysis identifies four strategies of coordination: the coordinator focusing on the individual user or on relations with other professionals; and the manager coaching the coordinator or providing structural support. Crucially, the coordination strategies by management remain weak as they do not directly relate to specific user needs. In process of bottom-up negotiations user needs become blurred and this is especially a challenge for management. The study therefore calls for an increased focus on the level nature of negotiations to bridge the gap that currently weakens coordination strategies by management.

EpiScanGIS: an online geographic surveillance system for meningococcal disease

Directory of Open Access Journals (Sweden)

Albert Jürgen

2008-07-01

Full Text Available Abstract Background Surveillance of infectious diseases increasingly relies on Geographic Information Systems (GIS. The integration of pathogen fine typing data in dynamic systems and visualization of spatio-temporal clusters are a technical challenge for system development. Results An online geographic information system (EpiScanGIS based on open source components has been launched in Germany in May 2006 for real time provision of meningococcal typing data in conjunction with demographic information (age, incidence, population density. Spatio-temporal clusters of disease detected by computer assisted cluster analysis (SaTScan™ are visualized on maps. EpiScanGIS enables dynamic generation of animated maps. The system is based on open source components; its architecture is open for other infectious agents and geographic regions. EpiScanGIS is available at http://www.episcangis.org, and currently has 80 registered users, mostly from the public health service in Germany. At present more than 2,900 cases of invasive meningococcal disease are stored in the database (data as of June 3, 2008. Conclusion EpiScanGIS exemplifies GIS applications and early-warning systems in laboratory surveillance of infectious diseases.

Optimal Coordination of Automatic Line Switches for Distribution Systems

Directory of Open Access Journals (Sweden)

Jyh-Cherng Gu

2012-04-01

Full Text Available For the Taiwan Power Company (Taipower, the margins of coordination times between the lateral circuit breakers (LCB of underground 4-way automatic line switches and the protection equipment of high voltage customers are often too small. This could lead to sympathy tripping by the feeder circuit breaker (FCB of the distribution feeder and create difficulties in protection coordination between upstream and downstream protection equipment, identification of faults, and restoration operations. In order to solve the problem, it is necessary to reexamine the protection coordination between LCBs and high voltage customers’ protection equipment, and between LCBs and FCBs, in order to bring forth new proposals for settings and operations. This paper applies linear programming to optimize the protection coordination of protection devices, and proposes new time current curves (TCCs for the overcurrent (CO and low-energy overcurrent (LCO relays used in normally open distribution systems by performing simulations in the Electrical Transient Analyzer Program (ETAP environment. The simulation results show that the new TCCs solve the coordination problems among high voltage customer, lateral, feeder, bus-interconnection, and distribution transformer. The new proposals also satisfy the requirements of Taipower on protection coordination of the distribution feeder automation system (DFAS. Finally, the authors believe that the system configuration, operation experience, and relevant criteria mentioned in this paper may serve as valuable references for other companies or utilities when building DFAS of their own.

Geographic Names

Data.gov (United States)

Minnesota Department of Natural Resources — The Geographic Names Information System (GNIS), developed by the United States Geological Survey in cooperation with the U.S. Board of Geographic Names, provides...

Exploring the potential for geographical knowledge systems in ...

African Journals Online (AJOL)

Residents of informal settlements are often faced with lack of essential services. These include services such as water, sanitation and electricity. Authorities responsible for providing these services often use Geographical Information Systems (GIS) for analysis prior to proposing developments in these settlements. However ...

Simple Rules for an Efficient Use of Geographic Information Systems in Molecular Ecology

Directory of Open Access Journals (Sweden)

Kevin Leempoel

2017-04-01

Full Text Available Geographic Information Systems (GIS are becoming increasingly popular in the context of molecular ecology and conservation biology thanks to their display options efficiency, flexibility and management of geodata. Indeed, spatial data for wildlife and livestock species is becoming a trend with many researchers publishing genomic data that is specifically suitable for landscape studies. GIS uniquely reveal the possibility to overlay genetic information with environmental data and, as such, allow us to locate and analyze genetic boundaries of various plant and animal species or to study gene-environment associations (GEA. This means that, using GIS, we can potentially identify the genetic bases of species adaptation to particular geographic conditions or to climate change. However, many biologists are not familiar with the use of GIS and underlying concepts and thus experience difficulties in finding relevant information and instructions on how to use them. In this paper, we illustrate the power of free and open source GIS approaches and provide essential information for their successful application in molecular ecology. First, we introduce key concepts related to GIS that are too often overlooked in the literature, for example coordinate systems, GPS accuracy and scale. We then provide an overview of the most employed open-source GIS-related software, file formats and refer to major environmental databases. We also reconsider sampling strategies as high costs of Next Generation Sequencing (NGS data currently diminish the number of samples that can be sequenced per location. Thereafter, we detail methods of data exploration and spatial statistics suited for the analysis of large genetic datasets. Finally, we provide suggestions to properly edit maps and to make them as comprehensive as possible, either manually or trough programming languages.

Distributed optimal coordination for distributed energy resources in power systems

DEFF Research Database (Denmark)

Wu, Di; Yang, Tao; Stoorvogel, A.

2017-01-01

Driven by smart grid technologies, distributed energy resources (DERs) have been rapidly developing in recent years for improving reliability and efficiency of distribution systems. Emerging DERs require effective and efficient coordination in order to reap their potential benefits. In this paper......, we consider an optimal DER coordination problem over multiple time periods subject to constraints at both system and device levels. Fully distributed algorithms are proposed to dynamically and automatically coordinate distributed generators with multiple/single storages. With the proposed algorithms...

Distributed Coordination of Fractional Dynamical Systems with Exogenous Disturbances

Directory of Open Access Journals (Sweden)

Hongyong Yang

2014-01-01

Full Text Available Distributed coordination of fractional multiagent systems with external disturbances is studied. The state observer of fractional dynamical system is presented, and an adaptive pinning controller is designed for a little part of agents in multiagent systems without disturbances. This adaptive pinning controller with the state observer can ensure multiple agents' states reaching an expected reference tracking. Based on disturbance observers, the controllers are composited with the pinning controller and the state observer. By applying the stability theory of fractional order dynamical systems, the distributed coordination of fractional multiagent systems with external disturbances can be reached asymptotically.

Micro practices of coordination based on complex adaptive systems: user needs and strategies for coordinating public health in Denmark

Directory of Open Access Journals (Sweden)

Morten Deleuran Terkildsen

2015-09-01

Full Text Available Introduction: Many highly formalised approaches to coordination poorly fit public health and recent studies call for coordination based on complex adaptive systems. Our contribution is two-fold. Empirically, we focus on public health, and theoretically we build on the patient perspective and treat coordination as a process of contingent, two-level negotiations of user needs.Theory and Methods: The paper draws on the concept of user needs-based coordination and sees coordination as a process, whereby needs emerging from the life world of the user are made amenable to the health system through negotiations. The analysis is based on an explorative case study of a health promotion initiative in Denmark. It adopts an anthropological qualitative approach and uses a range of qualitative data.Results: The analysis identifies four strategies of coordination: the coordinator focusing on the individual user or on relations with other professionals; and the manager coaching the coordinator or providing structural support. Crucially, the coordination strategies by management remain weak as they do not directly relate to specific user needs.Discussion: In process of bottom-up negotiations user needs become blurred and this is especially a challenge for management. The study therefore calls for an increased focus on the level nature of negotiations to bridge the gap that currently weakens coordination strategies by management.

Case studies in geographic information systems for environmental streamlining

Science.gov (United States)

2012-05-31

This 2012 summary report addresses the current use of geographic information systems (GIS) and related technologies by State Departments of Transportation (DOTs) for environmental streamlining and stewardship, particularly in relation to the National...

A preliminary geodetic data model for geographic information systems

Science.gov (United States)

Kelly, K. M.

2009-12-01

Our ability to gather and assimilate integrated data collections from multiple disciplines is important for earth system studies. Moreover, geosciences data collection has increased dramatically, with pervasive networks of observational stations on the ground, in the oceans, in the atmosphere and in space. Contemporary geodetic observations from several space and terrestrial technologies contribute to our knowledge of earth system processes and thus are a valuable source of high accuracy information for many global change studies. Assimilation of these geodetic observations and numerical models into models of weather, climate, oceans, hydrology, ice, and solid Earth processes is an important contribution geodesists can make to the earth science community. Clearly, the geodetic observations and models are fundamental to these contributions. ESRI wishes to provide leadership in the geodetic community to collaboratively build an open, freely available content specification that can be used by anyone to structure and manage geodetic data. This Geodetic Data Model will provide important context for all geographic information. The production of a task-specific geodetic data model involves several steps. The goal of the data model is to provide useful data structures and best practices for each step, making it easier for geodesists to organize their data and metadata in a way that will be useful in their data analyses and to their customers. Built on concepts from the successful Arc Marine data model, we introduce common geodetic data types and summarize the main thematic layers of the Geodetic Data Model. These provide a general framework for envisioning the core feature classes required to represent geodetic data in a geographic information system. Like Arc Marine, the framework is generic to allow users to build workflow or product specific geodetic data models tailored to the specific task(s) at hand. This approach allows integration of the data with other existing

Geographic information system for pigweed distribution in the US Southeast

Science.gov (United States)

In the southeastern United States, pigweeds have become troublesome weeds in agricultural systems. To implement management strategies to control them, agriculturalists need information on areas affected by pigweeds. Geographic information systems (GIS) afford users the ability to evaluate agricult...

Geographic Information Systems and Web Page Development

Science.gov (United States)

Reynolds, Justin

2004-01-01

The Facilities Engineering and Architectural Branch is responsible for the design and maintenance of buildings, laboratories, and civil structures. In order to improve efficiency and quality, the FEAB has dedicated itself to establishing a data infrastructure based on Geographic Information Systems, GIs. The value of GIS was explained in an article dating back to 1980 entitled "Need for a Multipurpose Cadastre which stated, "There is a critical need for a better land-information system in the United States to improve land-conveyance procedures, furnish a basis for equitable taxation, and provide much-needed information for resource management and environmental planning." Scientists and engineers both point to GIS as the solution. What is GIS? According to most text books, Geographic Information Systems is a class of software that stores, manages, and analyzes mapable features on, above, or below the surface of the earth. GIS software is basically database management software to the management of spatial data and information. Simply put, Geographic Information Systems manage, analyze, chart, graph, and map spatial information. At the outset, I was given goals and expectations from my branch and from my mentor with regards to the further implementation of GIs. Those goals are as follows: (1) Continue the development of GIS for the underground structures. (2) Extract and export annotated data from AutoCAD drawing files and construct a database (to serve as a prototype for future work). (3) Examine existing underground record drawings to determine existing and non-existing underground tanks. Once this data was collected and analyzed, I set out on the task of creating a user-friendly database that could be assessed by all members of the branch. It was important that the database be built using programs that most employees already possess, ruling out most AutoCAD-based viewers. Therefore, I set out to create an Access database that translated onto the web using Internet

Towards Coordination and Control of Multi-robot Systems

DEFF Research Database (Denmark)

Quottrup, Michael Melholt

This thesis focuses on control and coordination of mobile multi-robot systems (MRS). MRS can often deal with tasks that are difficult to be accomplished by a single robot. One of the challenges is the need to control, coordinate and synchronize the operation of several robots to perform some...... specified task. This calls for new strategies and methods which allow the desired system behavior to be specified in a formal and succinct way. Two different frameworks for the coordination and control of MRS have been investigated. Framework I - A network of robots is modeled as a network of multi...... a requirement specification in Computational Tree Logic (CTL) for a network of robots. The result is a set of motion plans for the robots which satisfy the specification. Framework II - A framework for controller synthesis for a single robot with respect to requirement specification in Linear-time Temporal...

Design Research of TIANDITU (Map Worl)-Based Geographic Information System for Travelling Service

Science.gov (United States)

Zhang, J.; Zhang, H.; Wang, C.

2014-04-01

TIANDITU (Map World) is the public version of the National Platform for Common Geospatial Information Service, and the travelling channel is TIANDITU-based geographic information platform for travelling service. With the development of tourism, traditional ways for providing travelling information cannot meet the needs of travelers. As such, the travelling channel of TIANDITU focuses on providing travel information abundantly and precisely, which integrated the geographic information data of TIANDITU Version 2.0 and the authoritative information resources from China National Tourism Administration. Furthermore, spatial positioning, category and information query of various travelling information were offered for the public in the travelling channel. This research mainly involves three important parts: the system design, key technologies of the system design and application examples. Firstly, this paper introduced the design of TIANDITU-based geographic information system for travelling service, and the general and database design were described in detail. The designs for general, database and travelling service above should consider lots of factors which illustrated in the paper in order to guarantee the efficient service. The process of system construction, the content of geographic information for travelling and system functions of geographic information for travelling are also proposed via diagram in this part. Then several key technologies were discussed, including the travelling information integration for main node and among nodes, general architecture design and management system for travelling channel, web portals and system interface. From the perspective of main technologies, this part describes how TIANDITU travelling channel can realize various functions and reach the requirements from different users. Finally, three application examples about travelling information query were listed shortly. The functions and search results are shown clearly in this

Geographic Information Systems using CODES linked data (Crash outcome data evaluation system)

Science.gov (United States)

2001-04-01

This report presents information about geographic information systems (GIS) and CODES linked data. Section one provides an overview of a GIS and the benefits of linking to CODES. Section two outlines the basic issues relative to the types of map data...

Exploitation of geographic information system at mapping and modelling of selected soil parameters

International Nuclear Information System (INIS)

Palka, B.; Makovnikova, J.; Siran, M.

2005-01-01

In this presentation authors describe using of computers and geographic information systems (GIS) at effective use of soil fund, rational exploitation and organization of agricultural soil fund on the territory of the Slovak Republic, its monitoring and modelling. Using and creating of some geographically oriented information systems and databases about soils as well as present trends are discussed

A coordination model for ultra-large scale systems of systems

Directory of Open Access Journals (Sweden)

Manuela L. Bujorianu

2013-11-01

Full Text Available The ultra large multi-agent systems are becoming increasingly popular due to quick decay of the individual production costs and the potential of speeding up the solving of complex problems. Examples include nano-robots, or systems of nano-satellites for dangerous meteorite detection, or cultures of stem cells for organ regeneration or nerve repair. The topics associated with these systems are usually dealt within the theories of intelligent swarms or biologically inspired computation systems. Stochastic models play an important role and they are based on various formulations of the mechanical statistics. In these cases, the main assumption is that the swarm elements have a simple behaviour and that some average properties can be deduced for the entire swarm. In contrast, complex systems in areas like aeronautics are formed by elements with sophisticated behaviour, which are even autonomous. In situations like this, a new approach to swarm coordination is necessary. We present a stochastic model where the swarm elements are communicating autonomous systems, the coordination is separated from the component autonomous activity and the entire swarm can be abstracted away as a piecewise deterministic Markov process, which constitutes one of the most popular model in stochastic control. Keywords: ultra large multi-agent systems, system of systems, autonomous systems, stochastic hybrid systems.

Rectification of the ancient geographic coordinates in Ptolemy's Geographike Hyphegesis

Directory of Open Access Journals (Sweden)

C. Marx

2012-03-01

Full Text Available A multitude of the ancient places given by Ptolemy in his Geography (~150 AD are so far unknown. One of the main problems of their identification are the errors of the given ancient coordinates. The different kinds of errors are illustrated by examples. A new geodetic-statistical analysis method is described, by which groups of places with homogeneous systematic errors and places with gross errors can be determined. Based on a transformation function describing the systematic errors, presumable modern coordinates of unknown places can be computed. That, in conjunction with further information, can make possible their identification. A test of the analysis method is carried out on a complex simulated example and shows its practicability. The analysis method has been applied within an interdisciplinary research project on Ptolemy's Geography. Further developments of the method are imaginable to make it accessible for related data diagnostics.

Particle simulation in curvilinear coordinate systems

International Nuclear Information System (INIS)

LeBrun, M.J.; Tajima, T.

1989-01-01

We present methods for particle simulation of plasmas in a nearly arbitrary coordinate metric and describe a toroidal electrostatic simulation code that evolved from this effort. A Mercier-type coordinate system is used, with a nonuniform radial grid for improved cross-field resolution. A fast iterative method for solving the Poisson equation is employed, and the interpolation/filtering technique shown to be momentum and energy conserving in the continuum limit. Lorentz ion and drift electron species are used. The code has been thoroughly tested for its reproduction of linear and nonlinear physics, and has been applied to the toroidal drift wave problem and its impact on anomalous transport in tokamaks. 40 refs., 10 figs., 1 tab

The influence of the Bible geographic objects peculiarities on the concept of the spatiotemporal geoinformation system

Science.gov (United States)

Linsebarth, A.; Moscicka, A.

2010-01-01

The article describes the infl uence of the Bible geographic object peculiarities on the spatiotemporal geoinformation system of the Bible events. In the proposed concept of this system the special attention was concentrated to the Bible geographic objects and interrelations between the names of these objects and their location in the geospace. In the Bible, both in the Old and New Testament, there are hundreds of geographical names, but the selection of these names from the Bible text is not so easy. The same names are applied for the persons and geographic objects. The next problem which arises is the classification of the geographical object, because in several cases the same name is used for the towns, mountains, hills, valleys etc. Also very serious problem is related to the time-changes of the names. The interrelation between the object name and its location is also complicated. The geographic object of this same name is located in various places which should be properly correlated with the Bible text. Above mentioned peculiarities of Bible geographic objects infl uenced the concept of the proposed system which consists of three databases: reference, geographic object, and subject/thematic. The crucial component of this system is proper architecture of the geographic object database. In the paper very detailed description of this database is presented. The interrelation between the databases allows to the Bible readers to connect the Bible text with the geography of the terrain on which the Bible events occurred and additionally to have access to the other geographical and historical information related to the geographic objects.

Onondaga Lake Watershed – A Geographic Information System Project Phase I – Needs assessment and spatial data framework

Science.gov (United States)

Freehafer, Douglas A.; Pierson, Oliver

2004-01-01

In the fall of 2002, the Onondaga Lake Partnership (OLP) formed a Geographic Information System (GIS) Planning Committee to begin the process of developing a comprehensive watershed geographic information system for Onondaga Lake. The goal of the Onondaga Lake Partnership geographic information system is to integrate the various types of spatial data used for scientific investigations, resource management, and planning and design of improvement projects in the Onondaga Lake Watershed. A needs-assessment survey was conducted and a spatial data framework developed to support the Onondaga Lake Partnership use of geographic information system technology. The design focused on the collection, management, and distribution of spatial data, maps, and internet mapping applications. A geographic information system library of over 100 spatial datasets and metadata links was assembled on the basis of the results of the needs assessment survey. Implementation options were presented, and the Geographic Information System Planning Committee offered recommendations for the management and distribution of spatial data belonging to Onondaga Lake Partnership members. The Onondaga Lake Partnership now has a strong foundation for building a comprehensive geographic information system for the Onondaga Lake watershed. The successful implementation of a geographic information system depends on the Onondaga Lake Partnership’s determination of: (1) the design and plan for a geographic information system, including the applications and spatial data that will be provided and to whom, (2) the level of geographic information system technology to be utilized and funded, and (3) the institutional issues of operation and maintenance of the system.

A cost-effective Geographic Information Systems for Transportation ...

African Journals Online (AJOL)

A cost-effective Geographic Information Systems for Transportation (GIS-T) application for traffic congestion analyses in the Developing World. ... The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader). If you would like ...

METHOD FOR DETERMINING THE SPATIAL COORDINATES IN THE ACTIVE STEREOSCOPIC SYSTEM

Directory of Open Access Journals (Sweden)

Valery V. Korotaev

2014-11-01

Full Text Available The paper deals with the structural scheme of active stereoscopic system and algorithm of its operation, providing the fast calculation of the spatial coordinates. The system includes two identical cameras, forming a stereo pair, and a laser scanner, which provides vertical scanning of the space before the system by the laser beam. A separate synchronizer provides synchronous operation of the two cameras. The developed algorithm of the system operation is implemented in MATLAB. In the proposed algorithm, the influence of background light is eliminated by interframe processing. The algorithm is based on precomputation of coordinates for epipolar lines and corresponding points in stereoscopic image. These data are used to quick calculation of the three-dimensional coordinates of points that form the three-dimensional images of objects. Experiment description on a physical model is given. Experimental results confirm the efficiency of the proposed active stereoscopic system and its operation algorithm. The proposed scheme of active stereoscopic system and calculating method for the spatial coordinates can be recommended for creation of stereoscopic systems, operating in real time and at high processing speed: devices for face recognition, systems for the position control of railway track, automobile active safety systems.

Illustration of distributed generation effects on protection system coordination

Science.gov (United States)

Alawami, Hussain Adnan

Environmental concerns, market forces, and emergence of new technologies have recently resulted in restructuring electric utility from vertically integrated networks to competitive deregulated entities. Distributed generation (DG) is playing a major role in such deregulated markets. When they are installed in small amounts and small sizes, their impacts on the system may be negligible. When their penetration levels increase as well as their sizes, however, they may start affecting the system performance from more than one aspect. Power system protection needs to be re-assessed after the emergence of DG. This thesis attempts to illustrate the impact of DG on the power system protection coordination. It will study the operation of the impedance relays, fuses, reclosers and overcurrent relays when a DG is added to the distribution network. Different DG sizes, distances from the network and locations within the distribution system will be considered. Power system protection coordination is very sensitive to the DG size where it is not for the DG distance. DG location has direct impact on the operation of the protective devices especially when it is inserted in the middle point of the distribution system. Key Words, Distributed Generation, Impedance relay, fuses, reclosers, overcurrent relays, power system protection coordination.

Preliminary Study on Secure Intranet Geographical Information System

International Nuclear Information System (INIS)

Kim, Hyun Tae; Park, Jee Won; Ko Han Suk

2005-01-01

A Geographical Information System (GIS) is usually defined as an information system for capturing, checking, storing, retrieving, manipulating, analyzing, and displaying spatial and relevant non-spatial data. Here 'spatial' means 'geo-referenced to the earth'. It is estimated that about 80% of the data used in business and government are of spatial type. The georeferenced information on sensitive location is usually protected as the highest level of confidentiality by the most information system. This paper discusses a commercial satellite imagery based secure Intranet GIS which runs the Microsoft .NET technology

A multi-agent system for coordinating international shipping

Energy Technology Data Exchange (ETDEWEB)

Goldsmith, S.Y.; Phillips, L.R.; Spires, S.V.

1998-05-01

Moving commercial cargo across the US-Mexico border is currently a complex, paper-based, error-prone process that incurs expensive inspections and delays at several ports of entry in the Southwestern US. Improved information handling will dramatically reduce border dwell time, variation in delivery time, and inventories, and will give better control of the shipment process. The Border Trade Facilitation System (BTFS) is an agent-based collaborative work environment that assists geographically distributed commercial and government users with transshipment of goods across the US-Mexico border. Software agents mediate the creation, validation and secure sharing of shipment information and regulatory documentation over the Internet, using the World Wide Web to interface with human actors. Agents are organized into Agencies. Each agency represents a commercial or government agency. Agents perform four specific functions on behalf of their user organizations: (1) agents with domain knowledge elicit commercial and regulatory information from human specialists through forms presented via web browsers; (2) agents mediate information from forms with diverse otologies, copying invariant data from one form to another thereby eliminating the need for duplicate data entry; (3) cohorts of distributed agents coordinate the work flow among the various information providers and they monitor overall progress of the documentation and the location of the shipment to ensure that all regulatory requirements are met prior to arrival at the border; (4) agents provide status information to human actors and attempt to influence them when problems are predicted.

Effect of reinforcement learning on coordination of multiangent systems

Science.gov (United States)

Bukkapatnam, Satish T. S.; Gao, Greg

2000-12-01

For effective coordination of distributed environments involving multiagent systems, learning ability of each agent in the environment plays a crucial role. In this paper, we develop a simple group learning method based on reinforcement, and study its effect on coordination through application to a supply chain procurement scenario involving a computer manufacturer. Here, all parties are represented by self-interested, autonomous agents, each capable of performing specific simple tasks. They negotiate with each other to perform complex tasks and thus coordinate supply chain procurement. Reinforcement learning is intended to enable each agent to reach a best negotiable price within a shortest possible time. Our simulations of the application scenario under different learning strategies reveals the positive effects of reinforcement learning on an agent's as well as the system's performance.

The Potential of Volunteered Geographic Information (VGI in Future Transport Systems

Directory of Open Access Journals (Sweden)

Maria Attard

2016-11-01

Full Text Available As transport systems are pushed to the limits in many cities, governments have tried to resolve problems of traffic and congestion by increasing capacity. Miller (2013 contends the need to identify new capabilities (instead of capacity of the transport infrastructure in order to increase efficiency without extending the physical infrastructure. Kenyon and Lyons (2003 identified integrated traveller information as a facilitator for better transport decisions. Today, with further developments in the use of geographic information systems (GIS and a greater disposition by the public to provide volunteered geographic information (VGI, the potential of information is not only integrated across modes but also user-generated, real-time and available on smartphones anywhere. This geographic information plays today an important role in sectors such as politics, businesses and entertainment, and presumably this would extend to transport in revealing people’s preferences for mobility and therefore be useful for decision-making. The widespread availability of networks and smartphones offer new opportunities supported by apps and crowdsourcing through social media such as the successful traffic and navigation app Waze, car sharing programmes such as Zipcar, and ride sharing systems such as Uber. This study aims to develop insights into the potential of governments to use voluntary (crowdsourced geographic information effectively to achieve sustainable mobility. A review of the literature and existing technology informs this article. Further research into this area is identified and presented at the end of the paper.

From Flow Logic to static type systems for coordination languages

DEFF Research Database (Denmark)

De Nicola, Rocco; Gorla, Daniele; Hansen, Rene Rydhof

2010-01-01

checks; therefore, the correctness properties cannot be statically enforced. By contrast, static analysis approaches based on Flow Logic usually guarantee properties statically. In this paper, we show how the insights from the Flow Logic approach can be used to construct a type system for statically......Coordination languages are often used to describe open-ended systems. This makes it challenging to develop tools for guaranteeing the security of the coordinated systems and the correctness of their interaction. Successful approaches to this problem have been based on type systems with dynamic...

From Flow Logic to Static Type Systems in Coordination Languages

DEFF Research Database (Denmark)

De Nicola, Rocco; Gorla, Daniele; Hansen, René Rydhof

2008-01-01

; therefore, the correctness properties cannot be statically enforced. By contrast, static analysis approaches based on Flow Logic usually guarantee properties statically. In this paper we show how to combine these two approaches to obtain a static type system for describing secure access to tuple spaces......Coordination languages are often used to describe open ended systems. This makes it challenging to develop tools for guaranteeing security of the coordinated systems and correctness of their interaction. Successful approaches to this problem have been based on type systems with dynamic checks...

47 CFR 15.525 - Coordination requirements.

Science.gov (United States)

2010-10-01

... the UWB device. If the imaging device is intended to be used for mobile applications, the geographical... Government through the National Telecommunications and Information Administration. The information provided... coordination of routine UWB operations shall not take longer than 15 business days from the receipt of the...

Geographic information systems - transportation ISTEA management systems server net prototype pooled fund study : phase B - summary

Science.gov (United States)

1997-06-01

The Geographic Information System-Transportation (GIS-T) ISTEA Management Systems Server Net Prototype Pooled Fund Study represents the first national cooperative effort in the transportation industry to address the management and monitoring systems ...

1:100,000 Grid of Louisiana, Geographic NAD83, LOSCO (1999)[quad100K_LOSCO_1999

Data.gov (United States)

Louisiana Geographic Information Center — This is a polygon dataset depicting the bounds of a regular 100K (60 minutes east-west by 30 minutes north-south) grid in geographic coordinates, NAD83, for the...

A Geographical Information System for Malaria in Colombia (SIGMA)

International Nuclear Information System (INIS)

Poveda, German; Hernandez, Olver; Urquijo, Lenis; Padilla Julio Cesar

2005-01-01

A Geographical Information System for Malaria in Colombia (SIGMA) is introduced and its capabilities and modules are described. It allows the interactive visualization of the Colombian Ministry of Social Protection database at national, regional and municipal levels and the analysis of relationships with different environmental and climatic variables. SIGMA is a powerful decision support system for human health intervention and management programs in Colombia

Which coordinate system for modelling path integration?

Science.gov (United States)

Vickerstaff, Robert J; Cheung, Allen

2010-03-21

Path integration is a navigation strategy widely observed in nature where an animal maintains a running estimate, called the home vector, of its location during an excursion. Evidence suggests it is both ancient and ubiquitous in nature, and has been studied for over a century. In that time, canonical and neural network models have flourished, based on a wide range of assumptions, justifications and supporting data. Despite the importance of the phenomenon, consensus and unifying principles appear lacking. A fundamental issue is the neural representation of space needed for biological path integration. This paper presents a scheme to classify path integration systems on the basis of the way the home vector records and updates the spatial relationship between the animal and its home location. Four extended classes of coordinate systems are used to unify and review both canonical and neural network models of path integration, from the arthropod and mammalian literature. This scheme demonstrates analytical equivalence between models which may otherwise appear unrelated, and distinguishes between models which may superficially appear similar. A thorough analysis is carried out of the equational forms of important facets of path integration including updating, steering, searching and systematic errors, using each of the four coordinate systems. The type of available directional cue, namely allothetic or idiothetic, is also considered. It is shown that on balance, the class of home vectors which includes the geocentric Cartesian coordinate system, appears to be the most robust for biological systems. A key conclusion is that deducing computational structure from behavioural data alone will be difficult or impossible, at least in the absence of an analysis of random errors. Consequently it is likely that further theoretical insights into path integration will require an in-depth study of the effect of noise on the four classes of home vectors. Copyright 2009 Elsevier Ltd

Geographical information system for radon gas from soil measurement

International Nuclear Information System (INIS)

Orlando, P.; Amici, M.; Altieri, A.; Massari, P.; Miccadei, E.; Onofri, A.; Orlando, C.; Paolelli, C.; Paron, P.; Perticaroli, P.; Piacentini, T.; Silvestri, C.; Minach, L.; Verdi, L.; Bertolo, A.; Trotti, F.

2000-03-01

The working program foresees the realization of an geographical information system for the check in field of the geological parameters and determination of uranium and radium contents in various type of rocks. It is here also pointed out a measuring method for radon concentration in soil [it

Geographical Information Systems (GIS); Sistemas de Informacion Geografica

Energy Technology Data Exchange (ETDEWEB)

Garcia Santiago, P.A. [Inisel Espacio, Madrid (Spain)

1994-12-31

Geographical Information Systems (GIS) have converted in a computer`s tool that due of its great versatility, exceeds of its usage as Basic Cartography Manager. The best GIS to use (vector or raster) will depend on the type of data we work with, we should keep in mind that the use of a specific GIS does not mean total incompatibility with others GIS. Future tendencies in this field aim to Data Storage Optimization and to Shared Operating System between Workstations and Personal computers. (Author)

A Real-World Community Health Worker Care Coordination Model for High-Risk Children.

Science.gov (United States)

Martin, Molly A; Perry-Bell, Kenita; Minier, Mark; Glassgow, Anne Elizabeth; Van Voorhees, Benjamin W

2018-04-01

Health care systems across the United States are considering community health worker (CHW) services for high-risk patients, despite limited data on how to build and sustain effective CHW programs. We describe the process of providing CHW services to 5,289 at-risk patients within a state-run health system. The program includes 30 CHWs, six care coordinators, the Director of Care Coordination, the Medical Director, a registered nurse, mental health specialists, and legal specialists. CHWs are organized into geographic and specialized teams. All CHWs receive basic training that includes oral and mental health; some receive additional disease-specific training. CHWs develop individualized care coordination plans with patients. The implementation of these plans involves delivery of a wide range of social service and coordination support. The number of CHW contacts is determined by patient risk. CHWs spend about 60% of their time in an office setting. To deliver the program optimally, we had to develop multiple CHW job categories that allow for CHW specialization. We created new technology systems to manage operations. Field issues resulted in program changes to improve service delivery and ensure safety. Our experience serves as a model for how to integrate CHWs into clinical and community systems.

The geosystems of complex geographical atlases

Directory of Open Access Journals (Sweden)

Jovanović Jasmina

2012-01-01

Full Text Available Complex geographical atlases represent geosystems of different hierarchical rank, complexity and diversity, scale and connection. They represent a set of large number of different pieces of information about geospace. Also, they contain systematized, correlative and in the apparent form represented pieces of information about space. The degree of information revealed in the atlas is precisely explained by its content structure and the form of presentation. The quality of atlas depends on the method of visualization of data and the quality of geodata. Cartographic visualization represents cognitive process. The analysis converts geospatial data into knowledge. A complex geographical atlas represents information complex of spatial - temporal coordinated database on geosystems of different complexity and territorial scope. Each geographical atlas defines a concrete geosystem. Systemic organization (structural and contextual determines its complexity and concreteness. In complex atlases, the attributes of geosystems are modeled and pieces of information are given in systematized, graphically unique form. The atlas can be considered as a database. In composing a database, semantic analysis of data is important. The result of semantic modeling is expressed in structuring of data information, in emphasizing logic connections between phenomena and processes and in defining their classes according to the degree of similarity. Accordingly, the efficiency of research of needed pieces of information in the process of the database use is enabled. An atlas map has a special power to integrate sets of geodata and present information contents in user - friendly and understandable visual and tactile way using its visual ability. Composing an atlas by systemic cartography requires the pieces of information on concrete - defined geosystems of different hierarchical level, the application of scientific methods and making of adequate number of analytical, synthetic

GLOBAL NAVIGATION SATELLITE SYSTEMS (GNSS IN GEOGRAPHICAL EDUCATION AND APPLIED RESEARCH

Directory of Open Access Journals (Sweden)

A. A. Suchilin

2017-01-01

Full Text Available The paper considers the introduction of the newest methods of topographic surveying into the educational and scientific process, using global navigation satellite systems (GNSS at the Faculty of Geography of Moscow State University. It describes the designation and use of the current reference geodetic training network for the training of students within the program of topographic practice. The basic concepts and purpose of the equipment of the geodetic class of the user segment of GNSS, both the basic location (reference stations and mobile complexes are disclosed. The technique of measuring and processing the accumulated data after field fixation (in static or kinematic modes of geographic objects and phenomena using GNSS has been given. A constantly operating network of reference stations of the faculty has been described. A full-scale example of using the GNSS complex by students of the faculty of the study area is given, the collected materials have been used for subsequent modeling (relief restoration based on the results of field measurements. Within the framework of the perspective development of the network of GNSS reference stations of the Moscow State University, the scheme of their location in the meridian direction on an ongoing basis has been shown, which will substantially expand the territorial coverage of the use of mobile GNSS complexes in geographic studies. Within the framework of the program of preservation of monuments of Russia’s cultural heritage, an example has been shown of the joint use of groundbased laser scanning techniques and a mobile GNSS complex conducted by students and teachers of leading Moscow universities and representatives of GFK Firm LLC. The result is the fixation of the geometric characteristics of the object in 1 cm steps in real coordinates, which makes it possible to carry out the necessary modeling, visualize the object in perspective form, carry out the necessary measurements, build sections

Wide-Area Robust Decentralized Coordinated Control of HVDC Power System Based on Polytopic System Theory

Directory of Open Access Journals (Sweden)

Shiyun Xu

2015-01-01

Full Text Available The present study proposes a hierarchical wide-area decentralized coordinated control framework for HVDC power system that is robust to multiple operating conditions. The upper level wide-area coordinated controller is designed in the form of dynamic output feedback control that coordinates the lower level HVDC supplementary controller, PSS, and SVC. In order to enhance the robustness of the designed controller under various operating conditions, the polytopic model is introduced such that the closed-loop control system can be operated under strong damping mode in virtue of the stability criterion based on damping ratio. Simulation results demonstrate that the proposed controller design algorithm is capable of enhancing the system damping over four different conditions.

Promoting coordination in Norwegian health care

Directory of Open Access Journals (Sweden)

Tor I. Romøren

2011-10-01

Full Text Available   Introduction: The Norwegian health care system is well organized within its two main sectors - primary health and long term care on the one hand, and hospitals and specialist services on the other. However, the relation between them lacks mediating structures.Policy practice: Enhancing coordination between primary and secondary health care has been central in Norwegian health care policy the last decade. In 2003 a committee was appointed to identify coordination problems and proposed a lot of practical and organisational recommendations. It relied on an approach challenging primary and secondary health care in shared geographical regions to take action. However, these proposals were not implemented. In 2008 a new Minister of Health and Care worked out plans under the key term "Coordination Reform". These reform plans superseded and expanded the previous policy initiatives concerning cooperation, but represented also a shift in focus to a regulative and centralised strategy, including new health legislation, structural reforms and use of economic incentives that are now about to be implemented.Discussion: The article analyses the perspectives and proposals of the previous and the recent reform initiatives in Norway and discusses them in relation to integrated care measures implemented in Denmark and Sweden.

The application of geographic information systems (GIS) in the ...

African Journals Online (AJOL)

A large amount of data is usually generated during environmental monitoring programmes. The data need to be transformed into useful information that can be used for interpretation and analysis of problems. This paper outlines the feasibility of using geographic information system (GIS) techniques in the analysis of ...

Understanding the use of geographical information systems (GIS) in health informatics research: A review.

Science.gov (United States)

Shaw, Nicola; McGuire, Suzanne

2017-06-23

The purpose of this literature review is to understand geographical information systems (GIS) and how they can be applied to public health informatics, medical informatics, and epidemiology. Relevant papers that reflected the use of geographical information systems (GIS) in health research were identified from four academic databases: Academic Search Complete, BioMed Central, PubMed Central, and Scholars Portal, as well as Google Scholar. The search strategy used was to identify articles with "geographic information systems", "GIS", "public health", "medical informatics", "epidemiology", and "health geography" as main subject headings or text words in titles and abstracts. Papers published between 1997 and 2014 were considered and a total of 39 articles were included to inform the authors on the use of GIS technologies in health informatics research. The main applications of GIS in health informatics and epidemiology include disease surveillance, health risk analysis, health access and planning, and community health profiling. GIS technologies can significantly improve quality and efficiency in health research as substantial connections can be made between a population's health and their geographical location. Gains in health informatics can be made when GIS are applied through research, however, improvements need to occur in the quantity and quality of data input for these systems to ensure better geographical health maps are used so that proper conclusions between public health and environmental factors may be made.

Coordinate Systems Integration for Craniofacial Database from Multimodal Devices

Directory of Open Access Journals (Sweden)

Deni Suwardhi

2005-05-01

Full Text Available This study presents a data registration method for craniofacial spatial data of different modalities. The data consists of three dimensional (3D vector and raster data models. The data is stored in object relational database. The data capture devices are Laser scanner, CT (Computed Tomography scan and CR (Close Range Photogrammetry. The objective of the registration is to transform the data from various coordinate systems into a single 3-D Cartesian coordinate system. The standard error of the registration obtained from multimodal imaging devices using 3D affine transformation is in the ranged of 1-2 mm. This study is a step forward for storing the craniofacial spatial data in one reference system in database.

Coordination of a complex welfare system case: rehabilitation entity in Finland.

Science.gov (United States)

Miettinen, Sari; Ashorn, Ulla; Lehto, Juhani; Viitanen, Elina

2011-01-01

The main purpose of this article is to analyse the institutional and political structures of the Finnish rehabilitation entity and the governmental efforts to improve the governance of the rehabilitation policy. Rehabilitation in Finland is a complex welfare system which has undergone several coordination attempts during the last two decades. The centrality of the coordination of this welfare system is obvious. Based on the content analysis of three Government's rehabilitation reports from 1994 to 2002 and their background papers, this article provides two main findings. First, the rehabilitation entity seems to be based on different funding strategies, different governing and different coordination models between the rehabilitation subsystems. Second, the governance discourse in the reports seems to be unchanging with a predominantly hierarchical mode. The article concludes with a discussion on the challenges to coordinate this kind of a complex welfare system as an entity and also how to overcome those challenges. Copyright © 2010 John Wiley & Sons, Ltd.

Application of geographic information system for emergency management

International Nuclear Information System (INIS)

Best, R.G.; Guber, A.L.; Kliman, D.H.

1991-01-01

One of the responsibilities of the DOE Nevada Operations Office, under the Federal Radiological Emergency Response Plan (FRERP) and the Aerial Measuring System (AMS) program, is the acquisition and analysis of radiological and associated environmental data. Much of the data are in the form of maps, tabular summaries, and vertical imagery. It is critical that these data be rapidly compiled into a common format in order to make accurate observations and informed decisions. This data management task is both large and complex. Within the Federal Radiological Monitoring and Assessment Center (FRMAC) there is a continuing effort to improve the data management and communication process. The most recent addition to this essential function has been the development and testing of a deployable Digital Image Processing (IP) / Geographic Information System (GIS). To demonstrate the potential of GIS for emergency response, the system was utilized at an interagency post-emergency table top exercise. A geographic database, consisting of 27 coregistered ''layers'' of cultural, radiological, satellite image,and environmental data was developed for the area within a 50-mile radius of the River Bend Station in Louisiana. In support of the exercise, maps and real time displays of individual layers and combinations of layers were produced to determine the impact of a hypothetical radiological release and to develop mitigation plans. 3 refs., 2 figs

Directional Overcurrent Relays Coordination Problems in Distributed Generation Systems

OpenAIRE

Jakub Ehrenberger; Jan Švec

2017-01-01

This paper proposes a new approach to the distributed generation system protection coordination based on directional overcurrent protections with inverse-time characteristics. The key question of protection coordination is the determination of correct values of all inverse-time characteristics coefficients. The coefficients must be correctly chosen considering the sufficiently short tripping times and the sufficiently long selectivity times. In the paper a new approach to protection coordinat...

Geographic Information Systems In Strategic Decision Making In Logistics Companies

Directory of Open Access Journals (Sweden)

Dr. Filiz Gürder

2013-07-01

Geographic information systems can make important contributions to logistic companies in the following areas: Routing, Optimization and Scheduling, Asset Tracking, Dispatching/Mobile, Territory Optimization and Planning, Site Selection and Optimization, Supply Chain Management, and Selecting the Supplier.

Implementation of a Relay Coordination System for the Mars Network

Science.gov (United States)

Allard, Daniel A.

2010-01-01

Mars network relay operations involve the coordination of lander and orbiter teams through long-term and short-term planning, tactical changes and post-pass analysis. Much of this coordination is managed through email traffic and point-to-point file data exchanges. It is often difficult to construct a complete and accurate picture of the relay situation at any given moment, as there is no centralized store of correlated relay data. The Mars Relay Operations Service (MaROS) is being implemented to address the problem of relay coordination for current and next-generation relay missions. The service is provided for the purpose of coordinating communications sessions between landed spacecraft assets and orbiting spacecraft assets at Mars. The service centralizes a set of functions previously distributed across multiple spacecraft operations teams, and as such greatly improves visibility into the end-to-end strategic coordination process. Most of the process revolves around the scheduling of communications sessions between the spacecraft during periods of time when a landed asset on Mars is geometrically visible by an orbiting spacecraft. These "relay" sessions are used to transfer data both to and from the landed asset via the orbiting asset on behalf of Earth-based spacecraft operators. This paper will discuss the relay coordination problem space, overview the architecture and design selected to meet system requirements, and describe the first phase of system implementation

An application of Geographic Information System in mapping flood ...

African Journals Online (AJOL)

Roland

1Department of Geography, Benue State University, Makurdi, Benue State, Nigeria. 2National Agency for the Control of AIDS (NACA), Central Area, Abuja, Nigeria. Accepted 20 May, 2013. This study deals with the application of Geographic Information Systems (GIS) in mapping flood risk zones in Makurdi Town. This study ...

Not just pretty pictures: Geographical Information Systems in TB ...

African Journals Online (AJOL)

Geographical Information Systems (GIS) is becoming a useful tool in disease control by health planners. However little is known about its potential in tuberculosis (TB) control. In 2000 the National TB Programme (NTP) in Malawi assessed its usefulness. Routinely collected case-finding data from the 3 previous years (1997 ...

Non-uniformly sampled grids in double pole coordinate system for freeform reflector construction

Science.gov (United States)

Ma, Donglin; Pacheco, Shaun; Feng, Zexin; Liang, Rongguang

2015-08-01

We propose a new method to design freeform reflectors by nonuniformly sampling the source intensity distribution in double pole coordinate system. In double pole coordinate system, there is no pole for the whole hemisphere because both poles of the spherical coordinate system are moved to southernmost point of the sphere and overlapped together. With symmetric definition of both angular coordinates in the modified double pole coordinate system, a better match between the source intensity distribution and target irradiance distribution can be achieved for reflectors with large acceptance solid angle, leading to higher light efficiency and better uniformity on the target surface. With non-uniform sampling of the source intensity, we can design circular freeform reflector to obtain uniform rectangular illumination pattern. Aided by the feedback optimization, the freeform reflector can achieve the collection efficiency for ideal point source over 0.7 and relative standard deviation (RSD) less than 0.1.

Distributed Sensor Coordination for Advanced Energy Systems

Energy Technology Data Exchange (ETDEWEB)

Tumer, Kagan [Oregon State Univ., Corvallis, OR (United States)

2013-07-31

The ability to collect key system level information is critical to the safe, efficient and reliable operation of advanced energy systems. With recent advances in sensor development, it is now possible to push some level of decision making directly to computationally sophisticated sensors, rather than wait for data to arrive to a massive centralized location before a decision is made. This type of approach relies on networked sensors (called “agents” from here on) to actively collect and process data, and provide key control decisions to significantly improve both the quality/relevance of the collected data and the associating decision making. The technological bottlenecks for such sensor networks stem from a lack of mathematics and algorithms to manage the systems, rather than difficulties associated with building and deploying them. Indeed, traditional sensor coordination strategies do not provide adequate solutions for this problem. Passive data collection methods (e.g., large sensor webs) can scale to large systems, but are generally not suited to highly dynamic environments, such as advanced energy systems, where crucial decisions may need to be reached quickly and locally. Approaches based on local decisions on the other hand cannot guarantee that each agent performing its task (maximize an agent objective) will lead to good network wide solution (maximize a network objective) without invoking cumbersome coordination routines. There is currently a lack of algorithms that will enable self-organization and blend the efficiency of local decision making with the system level guarantees of global decision making, particularly when the systems operate in dynamic and stochastic environments. In this work we addressed this critical gap and provided a comprehensive solution to the problem of sensor coordination to ensure the safe, reliable, and robust operation of advanced energy systems. The differentiating aspect of the proposed work is in shifting the focus

SENR /NRPy + : Numerical relativity in singular curvilinear coordinate systems

Science.gov (United States)

Ruchlin, Ian; Etienne, Zachariah B.; Baumgarte, Thomas W.

2018-03-01

We report on a new open-source, user-friendly numerical relativity code package called SENR /NRPy + . Our code extends previous implementations of the BSSN reference-metric formulation to a much broader class of curvilinear coordinate systems, making it ideally suited to modeling physical configurations with approximate or exact symmetries. In the context of modeling black hole dynamics, it is orders of magnitude more efficient than other widely used open-source numerical relativity codes. NRPy + provides a Python-based interface in which equations are written in natural tensorial form and output at arbitrary finite difference order as highly efficient C code, putting complex tensorial equations at the scientist's fingertips without the need for an expensive software license. SENR provides the algorithmic framework that combines the C codes generated by NRPy + into a functioning numerical relativity code. We validate against two other established, state-of-the-art codes, and achieve excellent agreement. For the first time—in the context of moving puncture black hole evolutions—we demonstrate nearly exponential convergence of constraint violation and gravitational waveform errors to zero as the order of spatial finite difference derivatives is increased, while fixing the numerical grids at moderate resolution in a singular coordinate system. Such behavior outside the horizons is remarkable, as numerical errors do not converge to zero near punctures, and all points along the polar axis are coordinate singularities. The formulation addresses such coordinate singularities via cell-centered grids and a simple change of basis that analytically regularizes tensor components with respect to the coordinates. Future plans include extending this formulation to allow dynamical coordinate grids and bispherical-like distribution of points to efficiently capture orbiting compact binary dynamics.

Development of Geographic Information Systems and their use in National Libraries of Russia

Directory of Open Access Journals (Sweden)

Natalya Kotelnikova

2005-04-01

Full Text Available By the end of the 20th century cartography has amassed a vast array of information on major aspects of existence, interaction and the functioning of nature and society owing to vigorous automation and computerisation. These are applied for the purpose of creating geographic information systems (GIS. The main function of geographic information systems is the storage and use of computer (electronic maps and atlases. Geographic information systems differ from each other in their territorial levels (global, national, regional, municipal and others and by their subjects (land, cadastre, ecological, sea and other maps. The geographic information system, ‘Black Sea’ is cited as an example. This is an information-based project compiled with a view to taking decisions on the protection of the resources of the basin of the Black Sea. The Black Sea GIS was developed for use by governments, scientists, the general public, NGOs and the media for the following purposes: · planning for marine environment activities and impacts on a regional scale; · public awareness through training, education, workshops, lectures and media; · scientific analysis, modelling, ecological impact assessment, science planning. The main GIS components are designed to perform the following functions: · data input; · data storage and database management; · data analysis and processing; · interaction with the user (graphical/map editing; and · data output and presentation (plotting.

Natural coordinates for a class of Benenti systems

International Nuclear Information System (INIS)

Blaszak, Maciej; Sergyeyev, Artur

2007-01-01

We present explicit formulas for the coordinates in which the Hamiltonians of the Benenti systems with flat metrics take natural form and the metrics in question are represented by constant diagonal matrices

Natural coordinates for a class of Benenti systems

Energy Technology Data Exchange (ETDEWEB)

Blaszak, Maciej [Institute of Physics, A. Mickiewicz University, Umultowska 85, 61-614 Poznan (Poland)]. E-mail: blaszakm@amu.edu.pl; Sergyeyev, Artur [Silesian University in Opava, Mathematical Institute, Na Rybnicku 1, 746 01 Opava (Czech Republic)]. E-mail: artur.sergyeyev@math.slu.cz

2007-05-21

We present explicit formulas for the coordinates in which the Hamiltonians of the Benenti systems with flat metrics take natural form and the metrics in question are represented by constant diagonal matrices.

1999 Baseline Sampling and Analysis Sampling Locations, Geographic NAD83, LOSCO (2004) [BSA_1999_sample_locations_LOSCO_2004

Data.gov (United States)

Louisiana Geographic Information Center — The monitor point data set was produced as a part of the Baseline Sampling and Analysis program coordinated by the Louisiana Oil Spill Coordinator's Office. This...

1997 Baseline Sampling and Analysis Sample Locations, Geographic NAD83, LOSCO (2004) [BSA_1997_sample_locations_LOSCO_2004

Data.gov (United States)

Louisiana Geographic Information Center — The monitor point data set was produced as a part of the Baseline Sampling and Analysis (BSA) program coordinated by the Louisiana Oil Spill Coordinator's Office....

1998 Baseline Sampling and Analysis Sampling Locations, Geographic NAD83, LOSCO (2004) [BSA_1998_sample_locations_LOSCO_2004

Data.gov (United States)

Louisiana Geographic Information Center — The monitor point data set was produced as a part of the Baseline Sampling and Analysis program coordinated by the Louisiana Oil Spill Coordinator's Office. This...

Unique sensor fusion system for coordinate-measuring machine tasks

Science.gov (United States)

Nashman, Marilyn; Yoshimi, Billibon; Hong, Tsai Hong; Rippey, William G.; Herman, Martin

1997-09-01

This paper describes a real-time hierarchical system that fuses data from vision and touch sensors to improve the performance of a coordinate measuring machine (CMM) used for dimensional inspection tasks. The system consists of sensory processing, world modeling, and task decomposition modules. It uses the strengths of each sensor -- the precision of the CMM scales and the analog touch probe and the global information provided by the low resolution camera -- to improve the speed and flexibility of the inspection task. In the experiment described, the vision module performs all computations in image coordinate space. The part's boundaries are extracted during an initialization process and then the probe's position is continuously updated as it scans and measures the part surface. The system fuses the estimated probe velocity and distance to the part boundary in image coordinates with the estimated velocity and probe position provided by the CMM controller. The fused information provides feedback to the monitor controller as it guides the touch probe to scan the part. We also discuss integrating information from the vision system and the probe to autonomously collect data for 2-D to 3-D calibration, and work to register computer aided design (CAD) models with images of parts in the workplace.

Predictive Analytics for Coordinated Optimization in Distribution Systems

Energy Technology Data Exchange (ETDEWEB)

Yang, Rui [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-04-13

This talk will present NREL's work on developing predictive analytics that enables the optimal coordination of all the available resources in distribution systems to achieve the control objectives of system operators. Two projects will be presented. One focuses on developing short-term state forecasting-based optimal voltage regulation in distribution systems; and the other one focuses on actively engaging electricity consumers to benefit distribution system operations.

Towards Geographic Information Systems (GIS) Implementation: A Case Study

Science.gov (United States)

Meaney, Miriam

2006-01-01

"Despite its central role in real-world geography, the Geographic Information System (GIS) has had little uptake to date in School Geography." (Wiegand, 2001) This statement can be accurately applied to the author's current school setting and was the focus of her and her colleagues' case study, commenced in 2004 and continued into 2005.…

UNIFIED MODELS OF ELEMENTS OF POWER SUPPLY SYSTEMS BASED ON EQUATIONS IN PHASE COORDINATES

Directory of Open Access Journals (Sweden)

Yu.N. Vepryk

2015-12-01

Full Text Available Purpose. The models of electrical machines in the phase coordinates, the universal algorithm for the simulation of separate elements in a d-q coordinates system and in a phase-coordinates system are proposed. Methodology. Computer methods of investigation of transients in electrical systems are based on a compilation of systems of differential equations and their numerical integration solution methods. To solve differential equations an implicit method of numerical integration was chosen. Because it provides to complete structural simulation possibility: firstly developing models of separate elements and then forming a model of the complex system. For the mathematical simulation of electromagnetic transients in the elements of the electrical systems has been accepted the implicit Euler-Cauchy method, because it provides a higher precision and stability of the computing processes. Results. In developing the model elements identified two groups of elements: - Static elements and electrical machines in the d-q coordinates; - Rotating electrical machines in phase coordinates. As an example, the paper provides a model of synchronous and asynchronous electric machines in the d-q coordinates system and the phase coordinate system. The generalization algorithm and the unified notation form of equations of elements of an electrical system are obtained. It provides the possibility of using structural methods to develop a mathematical model of power systems under transient conditions. Practical value. In addition, the using of a computer model allows to implement multivariant calculations for research and study of factors affecting the quantitative characteristics of the transients.

Coordination control of distributed systems

CERN Document Server

Villa, Tiziano

2015-01-01

This book describes how control of distributed systems can be advanced by an integration of control, communication, and computation. The global control objectives are met by judicious combinations of local and nonlocal observations taking advantage of various forms of communication exchanges between distributed controllers. Control architectures are considered according to  increasing degrees of cooperation of local controllers:  fully distributed or decentralized control,  control with communication between controllers,  coordination control, and multilevel control.  The book covers also topics bridging computer science, communication, and control, like communication for control of networks, average consensus for distributed systems, and modeling and verification of discrete and of hybrid systems. Examples and case studies are introduced in the first part of the text and developed throughout the book. They include: control of underwater vehicles, automated-guided vehicles on a container terminal, contro...

Geographic Information Systems-Transportation ISTEA management systems server-net prototype pooled fund study: Phase B summary

Energy Technology Data Exchange (ETDEWEB)

Espinoza, J. Jr.; Dean, C.D.; Armstrong, H.M. [and others

1997-06-01

The Geographic Information System-Transportation (GIS-T) ISTEA Management Systems Server Net Prototype Pooled Fund Study represents the first national cooperative effort in the transportation industry to address the management and monitoring systems as well as the statewide and metropolitan transportation planning requirements of the Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA). The Study was initiated in November 1993 through the Alliance for Transportation Research and under the leadership of the New Mexico State Highway and Transportation Department. Sandia National Laboratories, an Alliance partner, and Geographic Paradigm Computing. Inc. provided technical leadership for the project. In 1992, the Alliance for Transportation Research, the New Mexico State Highway and Transportation Department, Sandia National Laboratories, and Geographic Paradigm Computing, Inc., proposed a comprehensive research agenda for GIS-T. That program outlined a national effort to synthesize new transportation policy initiatives (e.g., management systems and Intelligent Transportation Systems) with the GIS-T server net ideas contained in the NCHRP project {open_quotes}Adaptation of GIS to Transportation{close_quotes}. After much consultation with state, federal, and private interests, a project proposal based on this agenda was prepared and resulted in this Study. The general objective of the Study was to develop GIS-T server net prototypes supporting the ISTEA requirements for transportation planning and management and monitoring systems. This objective can be further qualified to: (1) Create integrated information system architectures and design requirements encompassing transportation planning activities and data. (2) Encourage the development of functional GIS-T server net prototypes. (3) Demonstrate multiple information systems implemented in a server net environment.

Dynamic modeling and optimal joint torque coordination of advanced robotic systems

Science.gov (United States)

Kang, Hee-Jun

The development is documented of an efficient dynamic modeling algorithm and the subsequent optimal joint input load coordination of advanced robotic systems for industrial application. A closed-form dynamic modeling algorithm for the general closed-chain robotic linkage systems is presented. The algorithm is based on the transfer of system dependence from a set of open chain Lagrangian coordinates to any desired system generalized coordinate set of the closed-chain. Three different techniques for evaluation of the kinematic closed chain constraints allow the representation of the dynamic modeling parameters in terms of system generalized coordinates and have no restriction with regard to kinematic redundancy. The total computational requirement of the closed-chain system model is largely dependent on the computation required for the dynamic model of an open kinematic chain. In order to improve computational efficiency, modification of an existing open-chain KIC based dynamic formulation is made by the introduction of the generalized augmented body concept. This algorithm allows a 44 pct. computational saving over the current optimized one (O(N4), 5995 when N = 6). As means of resolving redundancies in advanced robotic systems, local joint torque optimization is applied for effectively using actuator power while avoiding joint torque limits. The stability problem in local joint torque optimization schemes is eliminated by using fictitious dissipating forces which act in the necessary null space. The performance index representing the global torque norm is shown to be satisfactory. In addition, the resulting joint motion trajectory becomes conservative, after a transient stage, for repetitive cyclic end-effector trajectories. The effectiveness of the null space damping method is shown. The modular robot, which is built of well defined structural modules from a finite-size inventory and is controlled by one general computer system, is another class of evolving

U Plant Geographic Zone Cleanup Prototype

International Nuclear Information System (INIS)

Romine, L.D.; Leary, K.D.; Lackey, M.B.; Robertson, J.R.

2006-01-01

The U Plant geographic zone (UPZ) occupies 0.83 square kilometers on the Hanford Site Central Plateau (200 Area). It encompasses the U Plant canyon (221-U Facility), ancillary facilities that supported the canyon, soil waste sites, and underground pipelines. The UPZ cleanup initiative coordinates the cleanup of the major facilities, ancillary facilities, waste sites, and contaminated pipelines (collectively identified as 'cleanup items') within the geographic zone. The UPZ was selected as a geographic cleanup zone prototype for resolving regulatory, technical, and stakeholder issues and demonstrating cleanup methods for several reasons: most of the area is inactive, sufficient characterization information is available to support decisions, cleanup of the high-risk waste sites will help protect the groundwater, and the zone contains a representative cross-section of the types of cleanup actions that will be required in other geographic zones. The UPZ cleanup demonstrates the first of 22 integrated zone cleanup actions on the Hanford Site Central Plateau to address threats to groundwater, the environment, and human health. The UPZ contains more than 100 individual cleanup items. Cleanup actions in the zone will be undertaken using multiple regulatory processes and decision documents. Cleanup actions will include building demolition, waste site and pipeline excavation, and the construction of multiple, large engineered barriers. In some cases, different cleanup actions may be taken at item locations that are immediately adjacent to each other. The cleanup planning and field activities for each cleanup item must be undertaken in a coordinated and cohesive manner to ensure effective execution of the UPZ cleanup initiative. The UPZ zone cleanup implementation plan (ZCIP) [1] was developed to address the need for a fundamental integration tool for UPZ cleanup. As UPZ cleanup planning and implementation moves forward, the ZCIP is intended to be a living document that will

Real-time Geographic Information System (GIS) for Monitoring the Area of Potential Water Level Using Rule Based System

Science.gov (United States)

Anugrah, Wirdah; Suryono; Suseno, Jatmiko Endro

2018-02-01

Management of water resources based on Geographic Information System can provide substantial benefits to water availability settings. Monitoring the potential water level is needed in the development sector, agriculture, energy and others. In this research is developed water resource information system using real-time Geographic Information System concept for monitoring the potential water level of web based area by applying rule based system method. GIS consists of hardware, software, and database. Based on the web-based GIS architecture, this study uses a set of computer that are connected to the network, run on the Apache web server and PHP programming language using MySQL database. The Ultrasound Wireless Sensor System is used as a water level data input. It also includes time and geographic location information. This GIS maps the five sensor locations. GIS is processed through a rule based system to determine the level of potential water level of the area. Water level monitoring information result can be displayed on thematic maps by overlaying more than one layer, and also generating information in the form of tables from the database, as well as graphs are based on the timing of events and the water level values.

Definition of coordinate system for three-dimensional data analysis in the foot and ankle.

LENUS (Irish Health Repository)

Green, Connor

2012-02-01

BACKGROUND: Three-dimensional data is required to have advanced knowledge of foot and ankle kinematics and morphology. However, studies have been difficult to compare due to a lack of a common coordinate system. Therefore, we present a means to define a coordinate frame in the foot and ankle and its clinical application. MATERIALS AND METHODS: We carried out ten CT scans in anatomically normal feet and segmented them in a general purpose segmentation program for grey value images. 3D binary formatted stereolithography files were then create and imported to a shape analysis program for biomechanics which was used to define a coordinate frame and carry out morphological analysis of the forefoot. RESULTS: The coordinate frame had axes standard deviations of 2.36 which are comparable to axes variability of other joint coordinate systems. We showed a strong correlation between the lengths of the metatarsals within and between the columns of the foot and also among the lesser metatarsal lengths. CONCLUSION: We present a reproducible method for construction of a coordinate system for the foot and ankle with low axes variability. CLINICAL RELEVANCE: To conduct meaningful comparison between multiple subjects the coordinate system must be constant. This system enables such comparison and therefore will aid morphological data collection and improve preoperative planning accuracy.

Pygrass: An Object Oriented Python Application Programming Interface (API for Geographic Resources Analysis Support System (GRASS Geographic Information System (GIS

Directory of Open Access Journals (Sweden)

Marco Ciolli

2013-03-01

Full Text Available PyGRASS is an object-oriented Python Application Programming Interface (API for Geographic Resources Analysis Support System (GRASS Geographic Information System (GIS, a powerful open source GIS widely used in academia, commercial settings and governmental agencies. We present the architecture of the PyGRASS library, covering interfaces to GRASS modules, vector and raster data, with a focus on the new capabilities that it provides to GRASS users and developers. Our design concept of the module interface allows the direct linking of inputs and outputs of GRASS modules to create process chains, including compatibility checks, process control and error handling. The module interface was designed to be easily extended to work with remote processing services (Web Processing Service (WPS, Web Service Definition Language (WSDL/Simple Object Access Protocol (SOAP. The new object-oriented Python programming API introduces an abstract layer that opens the possibility to use and access transparently the efficient raster and vector functions of GRASS that are implemented in C. The design goal was to provide an easy to use, but powerful, Python interface for users and developers who are not familiar with the programming language C and with the GRASS C-API. We demonstrate the capabilities, scalability and performance of PyGRASS with several dedicated tests and benchmarks. We compare and discuss the results of the benchmarks with dedicated C implementations.

System of two-coordinate cylindrical proportional chambers with resistive cathode

International Nuclear Information System (INIS)

Golubev, V.B.; Peryshkin, A.N.; Red'ko, I.Yu.; Serednyakov, S.I.

1981-01-01

A system of two-coordinate cylindrical proportional chambers is developed for experiments on studying the e + e - annihilation. The system consists of 6 independent proportional chambers of semicylindrical configuration with a gap between anode and cathode equal to 5 mm. The diameter of an external chnsamber equals 25 cm and its length cotitutes 40 cm. Anode wires 20 μm in-diameter are fixed in parallel to the system axis with a pitch of 2-3 mm. The use of a resisti ve cothode permitting to maintain the anode wires and delay circuits under the ground potential is one of the specific feabures of the given chamber. The resistive layer is produced by sputtering the aquadag aqueous suspension with the polyvinylacetate emulsion on a fibregrass-textolite. 8 delay circuits is mounted outside of each chamber from the side of the cathode. A functional flowsheet of a data readout system is given. The track angte is determined directiy according to the numbers of operated wires; coordinates along the axis are determined by means of the delay circuits placed outside the chamber near the resistive cathode. The accuracy of the coordinate measurement in both directions constitutes about 1 mm. Each chamber permits to measure the coordinates of several particles, if they entry into different delay circuits. The proportional chambers are filled with the mixture of Ar+30%CO 2 . Anode and cathode efficiencies in the plateau region (150-250) exceed 99%

Measuring public health practice and outcomes in chronic disease: a call for coordination.

Science.gov (United States)

Porterfield, Deborah S; Rogers, Todd; Glasgow, LaShawn M; Beitsch, Leslie M

2015-04-01

A strategic opportunity exists to coordinate public health systems and services researchers' efforts to develop local health department service delivery measures and the efforts of divisions within the Centers for Disease Control and Prevention's National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP) to establish outcome indicators for public health practice in chronic disease. Several sets of outcome indicators developed by divisions within NCCDPHP and intended for use by state programs can be tailored to assess outcomes of interventions within smaller geographic areas or intervention settings. Coordination of measurement efforts could potentially allow information to flow from the local to the state to the federal level, enhancing program planning, accountability, and even subsequent funding for public health practice.

Spatial pattern of Amazonian timber species using cartesian and spatial coordinates method

Directory of Open Access Journals (Sweden)

Tiago Monteiro Condé

2016-06-01

Full Text Available Geographic information system (GIS applied to forest analysis permit the recognition and analysis of spatial patterns of species in two and three dimensional. The aim of this study to demonstrate the efficiency of cartesian and spatial coordinates method (MCCE, method of correcting UTM coordinates of trees location in accordance with the location of field or Cartesian (X ,Y, combined with natural neighbor index (ANND in recognition and analysis of spatial distribution patterns of four commercial timber species in forest management in Caracaraí, Roraima State, Brazil. Simulations were performed on 9 ha, divided into 100 plots of 100 m2 each. Collected data were DBH > 10 cm, commercial and total heights, cartesian coordinates (X,Y and spatial coordinates (UTM. Random spatial patterns were observed in Eschweilera bracteosa and Manilkara huberi. The dispersed and rare spatial patterns were observed in Dinizia excelsa and Cedrelinga cateniformis. MCCE proved to be an efficient method in the recognition and analysis of spatial patterns of native species from Amazon rain forest, as forest planning becomes easier by 2D and 3D simulations.

Distributed optimization for systems design : an augmented Lagrangian coordination method

NARCIS (Netherlands)

Tosserams, S.

2008-01-01

This thesis presents a coordination method for the distributed design optimization of engineering systems. The design of advanced engineering systems such as aircrafts, automated distribution centers, and microelectromechanical systems (MEMS) involves multiple components that together realize the

Relation between coordinate systems describing the dynamics of a loaded Stewart platform

Science.gov (United States)

Petrova, V. I.

2018-05-01

The paper puts forward formulae for transformation of coordinates in three coordinate frames used for the study of motion of a loaded Stewart platform, which is the central mechanism of the dynamic bench. A new method for finding the law of variation of coordinates is proposed. This method depends on solving the problem-specific system of differential equations.

Food Delivery System with the Utilization of Vehicle Using Geographical Information System (GIS) and A Star Algorithm

Science.gov (United States)

Siregar, B.; Gunawan, D.; Andayani, U.; Sari Lubis, Elita; Fahmi, F.

2017-01-01

Food delivery system is one kind of geographical information systems (GIS) that can be applied through digitation process. The main case in food delivery system is the way to determine the shortest path and food delivery vehicle movement tracking. Therefore, to make sure that the digitation process of food delivery system can be applied efficiently, it is needed to add shortest path determination facility and food delivery vehicle tracking. This research uses A Star (A*) algorithm for determining shortest path and location-based system (LBS) programming for moving food delivery vehicle object tracking. According to this research, it is generated the integrated system that can be used by food delivery driver, customer, and administrator in terms of simplifying the food delivery system. Through the application of shortest path and the tracking of moving vehicle, thus the application of food delivery system in the scope of geographical information system (GIS) can be executed.

Locating food sovereignty: geographical and sectoral distance in the global food system

NARCIS (Netherlands)

M.J. Robbins (Martha Jane)

2013-01-01

textabstractThis paper seeks to problematize the role of local food systems within the food sovereignty movement and as a counter to the logic of the global industrial food system. It answers the question of how food sovereignty, via its tenet of local food systems, addresses the geographical and

Improving polio vaccination coverage in Nigeria through the use of geographic information system technology.

Science.gov (United States)

Barau, Inuwa; Zubairu, Mahmud; Mwanza, Michael N; Seaman, Vincent Y

2014-11-01

Historically, microplanning for polio vaccination campaigns in Nigeria relied on inaccurate and incomplete hand-drawn maps, resulting in the exclusion of entire settlements and missed children. The goal of this work was to create accurate, coordinate-based maps for 8 polio-endemic states in northern Nigeria to improve microplanning and support tracking of vaccination teams, thereby enhancing coverage, supervision, and accountability. Settlement features were identified in the target states, using high-resolution satellite imagery. Field teams collected names and geocoordinates for each settlement feature, with the help of local guides. Global position system (GPS) tracking of vaccination teams was conducted in selected areas and daily feedback provided to supervisors. Geographic information system (GIS)-based maps were created for 2238 wards in the 8 target states. The resulting microplans included all settlements and more-efficient team assignments, owing to the improved spatial reference. GPS tracking was conducted in 111 high-risk local government areas, resulting in improved team performance and the identification of missed/poorly covered settlements. Accurate and complete maps are a necessary part of an effective polio microplan, and tracking vaccinators gives supervisors a tool to ensure that all settlements are visited. © The Author 2014. Published by Oxford University Press on behalf of the Infectious Diseases Society of America. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

A method of groundwater quality assessment based on fuzzy network-CANFIS and geographic information system (GIS)

Science.gov (United States)

Gholami, V.; Khaleghi, M. R.; Sebghati, M.

2017-11-01

The process of water quality testing is money/time-consuming, quite important and difficult stage for routine measurements. Therefore, use of models has become commonplace in simulating water quality. In this study, the coactive neuro-fuzzy inference system (CANFIS) was used to simulate groundwater quality. Further, geographic information system (GIS) was used as the pre-processor and post-processor tool to demonstrate spatial variation of groundwater quality. All important factors were quantified and groundwater quality index (GWQI) was developed. The proposed model was trained and validated by taking a case study of Mazandaran Plain located in northern part of Iran. The factors affecting groundwater quality were the input variables for the simulation, whereas GWQI index was the output. The developed model was validated to simulate groundwater quality. Network validation was performed via comparison between the estimated and actual GWQI values. In GIS, the study area was separated to raster format in the pixel dimensions of 1 km and also by incorporation of input data layers of the Fuzzy Network-CANFIS model; the geo-referenced layers of the effective factors in groundwater quality were earned. Therefore, numeric values of each pixel with geographical coordinates were entered to the Fuzzy Network-CANFIS model and thus simulation of groundwater quality was accessed in the study area. Finally, the simulated GWQI indices using the Fuzzy Network-CANFIS model were entered into GIS, and hence groundwater quality map (raster layer) based on the results of the network simulation was earned. The study's results confirm the high efficiency of incorporation of neuro-fuzzy techniques and GIS. It is also worth noting that the general quality of the groundwater in the most studied plain is fairly low.

Advancing Theory? Landscape Archaeology and Geographical Information Systems

Directory of Open Access Journals (Sweden)

Di Hu

2012-05-01

Full Text Available This paper will focus on how Geographical Information Systems (GIS have been applied in Landscape Archaeology from the late 1980s to the present. GIS, a tool for organising and analysing spatial information, has exploded in popularity, but we still lack a systematic overview of how it has contributed to archaeological theory, specifically Landscape Archaeology. This paper will examine whether and how GIS has advanced archaeological theory through a historical review of its application in archaeology.

Application of 2-dimensional coordinate system conversion in stress measurements with neutron diffraction

International Nuclear Information System (INIS)

Wang, D.-Q.; Hubbard, C.R.; Spooner, S.

2000-01-01

This paper will present a method and program to precisely calculate the coordinates in a positioner coordinate system from given sample position coordinates with a minimum number of neutron surface scans for three possible circumstances in stress and texture measurement using neutron diffraction

Considerazioni sui nuovi servizi di conversione di coordinate del Geoportale Nazionale

Directory of Open Access Journals (Sweden)

Roberto Rossi

2013-04-01

questo passaggio, i servizi di conversione del Geoportale Nazionale siano un preziosissimo strumento a disposizione di tutti... Publication of conversion systems of coordinates on the National Geoportal has attracted positive comments in general, but also some criticism by users.The author hopes that transformation grids owned by Italian Military Geographic Institute will be soon available as Open Data. Anyway he believes that, meanwhile, conversion and transformation services offered by National Geoportal are precious tools accessible to everyone.

Technical note: Modeling primate occlusal topography using geographic information systems technology.

Science.gov (United States)

Zuccotti, L F; Williamson, M D; Limp, W F; Ungar, P S

1998-09-01

Most functional analyses of primate tooth form have been limited to linear or area measurements. Such studies have offered but a limited glimpse at differences in occlusal relief among taxa. Such differences in dental topography may relate to tooth function and, so, have considerable implications for the inference of diet from fossil teeth. In this article, we describe a technique to model and compare primate molars in three dimensions using Geographic Resources Analysis Support System (GRASS) software. We examine unworn lower second molars of three extant hominoids with known differences in diet (Gorilla gorilla, Pan troglodytes, and Pongo pygmaeus), and two fossil forms, (Afropithecus turkanesis and Dryopithecus laietanus). First, we obtained approximately 400 landmarks on the occlusal surfaces of each tooth using an electromagnetic digitizer. Raster "terrain models" of occlusal surfaces were then created by interpolation of the coordinate data. We used GRASS terrain analysis automated techniques to quantify the volumes and slopes of individual cusps. We also used the GRASS watershed technique to identify the volume of liquid that would accumulate in each tooth's basin (a measure of basin area), and the directions and intensity of drainage over the occlusal surface. In sum, GRASS shows considerable potential for the characterization and comparison of tooth surfaces. Furthermore, techniques described here are not limited to the study of teeth, but may be broadly applicable to studies of skulls, joints, and other biological structures.

Development of a Carbon Management Geographic Information System (GIS) for the United States

Energy Technology Data Exchange (ETDEWEB)

Howard Herzog; Holly Javedan

2009-12-31

In this project a Carbon Management Geographical Information System (GIS) for the US was developed. The GIS stored, integrated, and manipulated information relating to the components of carbon management systems. Additionally, the GIS was used to interpret and analyze the effect of developing these systems. This report documents the key deliverables from the project: (1) Carbon Management Geographical Information System (GIS) Documentation; (2) Stationary CO{sub 2} Source Database; (3) Regulatory Data for CCS in United States; (4) CO{sub 2} Capture Cost Estimation; (5) CO{sub 2} Storage Capacity Tools; (6) CO{sub 2} Injection Cost Modeling; (7) CO{sub 2} Pipeline Transport Cost Estimation; (8) CO{sub 2} Source-Sink Matching Algorithm; and (9) CO{sub 2} Pipeline Transport and Cost Model.

Joint Service Common Operating Environment (COE) Common Geographic Information System functional requirements

Energy Technology Data Exchange (ETDEWEB)

Meitzler, W.D.

1992-06-01

In the context of this document and COE, the Geographic Information Systems (GIS) are decision support systems involving the integration of spatially referenced data in a problem solving environment. They are digital computer systems for capturing, processing, managing, displaying, modeling, and analyzing geographically referenced spatial data which are described by attribute data and location. The ability to perform spatial analysis and the ability to combine two or more data sets to create new spatial information differentiates a GIS from other computer mapping systems. While the CCGIS allows for data editing and input, its primary purpose is not to prepare data, but rather to manipulate, analyte, and clarify it. The CCGIS defined herein provides GIS services and resources including the spatial and map related functionality common to all subsystems contained within the COE suite of C4I systems. The CCGIS, which is an integral component of the COE concept, relies on the other COE standard components to provide the definition for other support computing services required.

Geographic information system development in the CARETS project

Science.gov (United States)

Mitchell, William B.; Fegeas, Robin G.; Fitzpatrick, Katherine A.; Hallam, Cheryl A.

1977-01-01

Experience in the development of a geographic information system to support the CARETS project has confirmed the considerable advantages that may accrue by paralleling the system development with a rational and balanced system production effort which permits the integration of the education and training of users with interim deliverable products to them. Those advantages include support for a long-term staff plan that recognizes substantial staff changes through system development and implementation, a fiscal plan that provides continuity in resources necessary for total system development, and a feedback system which allows the user to communicate his experiences in using the system. Thus far balance between system development and system production has not been achieved because of continuing large-scale spatial data processing requirements coupled with strong and insistent demands from users for immediately deliverable products from the system. That imbalance has refocussed staffing and fiscal plans from long-term system development to short- and near-term production requirements, continuously extends total system development time, and increases the possibility that later system development may reduce the usefulness of current interim products.

Static analysis of large-scale multibody system using joint coordinates and spatial algebra operator.

Science.gov (United States)

Omar, Mohamed A

2014-01-01

Initial transient oscillations inhibited in the dynamic simulations responses of multibody systems can lead to inaccurate results, unrealistic load prediction, or simulation failure. These transients could result from incompatible initial conditions, initial constraints violation, and inadequate kinematic assembly. Performing static equilibrium analysis before the dynamic simulation can eliminate these transients and lead to stable simulation. Most exiting multibody formulations determine the static equilibrium position by minimizing the system potential energy. This paper presents a new general purpose approach for solving the static equilibrium in large-scale articulated multibody. The proposed approach introduces an energy drainage mechanism based on Baumgarte constraint stabilization approach to determine the static equilibrium position. The spatial algebra operator is used to express the kinematic and dynamic equations of the closed-loop multibody system. The proposed multibody system formulation utilizes the joint coordinates and modal elastic coordinates as the system generalized coordinates. The recursive nonlinear equations of motion are formulated using the Cartesian coordinates and the joint coordinates to form an augmented set of differential algebraic equations. Then system connectivity matrix is derived from the system topological relations and used to project the Cartesian quantities into the joint subspace leading to minimum set of differential equations.

Applications of Remote Sensing and Geographic Information System (GIS) in Archaeology

Digital Repository Service at National Institute of Oceanography (India)

ManiMurali, R.

The advancement of remote sensing technology and the analysing capability of Geographical Information System (GIS) can very well be used in the science of Archaeology. Though these subjects look apart, they can be studied in conjunction with each...

Development and implementation of an HIV/AIDS trials management system: a geographical information systems approach

CSIR Research Space (South Africa)

Busgeeth, K

2008-01-01

Full Text Available of randomised and clinically controlled trials of HIV/AIDS interventions can provide invaluable information to decision-making processes. Using the newly emerging geographical information systems (GIS) technology, researchers have developed a tool which assists...

Insulation co-ordination in high-voltage electric power systems

CERN Document Server

Diesendorf, W

2015-01-01

Insulation Co-ordination in High-Voltage Electric Power Systems deals with the methods of insulation needed in different circumstances. The book covers topics such as overvoltages and lightning surges; disruptive discharge and withstand voltages; self-restoring and non-self-restoring insulation; lightning overvoltages on transmission lines; and the attenuation and distortion of lightning surges. Also covered in the book are topics such as the switching surge designs of transmission lines, as well as the insulation coordination of high-voltage stations. The text is recommended for electrical en

Coordinate alignment of combined measurement systems using a modified common points method

Science.gov (United States)

Zhao, G.; Zhang, P.; Xiao, W.

2018-03-01

The co-ordinate metrology has been extensively researched for its outstanding advantages in measurement range and accuracy. The alignment of different measurement systems is usually achieved by integrating local coordinates via common points before measurement. The alignment errors would accumulate and significantly reduce the global accuracy, thus need to be minimized. In this thesis, a modified common points method (MCPM) is proposed to combine different traceable system errors of the cooperating machines, and optimize the global accuracy by introducing mutual geometric constraints. The geometric constraints, obtained by measuring the common points in individual local coordinate systems, provide the possibility to reduce the local measuring uncertainty whereby enhance the global measuring certainty. A simulation system is developed in Matlab to analyze the feature of MCPM using the Monto-Carlo method. An exemplary setup is constructed to verify the feasibility and efficiency of the proposed method associated with laser tracker and indoor iGPS systems. Experimental results show that MCPM could significantly improve the alignment accuracy.

Highway vehicle systems contractors coordination meeting. Seventeenth summary report

Energy Technology Data Exchange (ETDEWEB)

None

1979-01-01

Separate abstracts was prepared for each of the 62 papers presented at the Contractors' Coordination meeting on highway vehicle systems. One paper had previously appeared in DOE's data base.

Coordination and standardization of federal sedimentation activities

Science.gov (United States)

Glysson, G. Douglas; Gray, John R.

1997-01-01

In August 1964, the Bureau of the Budget issued Circular A-67 to set forth guidelines for the coordination of water-data acquisition activities throughout the Federal government. The U.S. Department of the Interior was assigned the task of implementing Circular A-67, which in turn redelegated this responsibility to the U.S. Geological Survey (USGS). Delegation of the lead responsibility for water-data coordination to the USGS occurred because of its historical role as the primary agency for water-data acquisition in the United States. To provide overall leadership for implementing the provisions of Circular A-67, the USGS established the Office of Water Data Coordination in the Water Resources Division (WRD). In addition, regional and district offices of the WRD were delegated responsibility for coordinating water data within their geographic areas of responsibility. On December 10, 1991, the Office of Management and Budget issued OMB Number Memorandum M-92-01, which expands the USGS's coordination role to encompass all water information. This includes data critical to water resources in the following categories: - surface- and ground-water quality and quantity,

Integration and coordination in a cognitive vision system

OpenAIRE

Wrede, Sebastian; Hanheide, Marc; Wachsmuth, Sven; Sagerer, Gerhard

2006-01-01

In this paper, we present a case study that exemplifies general ideas of system integration and coordination. The application field of assistant technology provides an ideal test bed for complex computer vision systems including real-time components, human-computer interaction, dynamic 3-d environments, and information retrieval aspects. In our scenario the user is wearing an augmented reality device that supports her/him in everyday tasks by presenting information tha...

Coordinated Direct and Relay Transmission with Interference Cancelation in Wireless Systems

DEFF Research Database (Denmark)

Thai, Chan; Popovski, Petar

2011-01-01

Two-way relaying schemes in wireless systems obtain throughput gain by utilizing two features (1) jointly serve two communication flows, thus implementing network coding and (2) use of information that is a priori known to cancel interference and obtain the desired signal. Based on these principles......, we propose other schemes that bring throughput gains in wireless cellular systems, where relayed and direct transmissions are carried out in coordinated way. The results show that the coordinated transmission exhibit throughput improvement similar to the two–way relaying schemes....

Beyond redundancy how geographic redundancy can improve service availability and reliability of computer-based systems

CERN Document Server

Bauer, Eric; Eustace, Dan

2012-01-01

"While geographic redundancy can obviously be a huge benefit for disaster recovery, it is far less obvious what benefit is feasible and likely for more typical non-catastrophic hardware, software, and human failures. Georedundancy and Service Availability provides both a theoretical and practical treatment of the feasible and likely benefits of geographic redundancy for both service availability and service reliability. The text provides network/system planners, IS/IT operations folks, system architects, system engineers, developers, testers, and other industry practitioners with a general discussion about the capital expense/operating expense tradeoff that frames system redundancy and georedundancy"--

Distributed formation tracking using local coordinate systems

DEFF Research Database (Denmark)

Yang, Qingkai; Cao, Ming; Garcia de Marina, Hector

2018-01-01

This paper studies the formation tracking problem for multi-agent systems, for which a distributed estimator–controller scheme is designed relying only on the agents’ local coordinate systems such that the centroid of the controlled formation tracks a given trajectory. By introducing a gradient...... descent term into the estimator, the explicit knowledge of the bound of the agents’ speed is not necessary in contrast to existing works, and each agent is able to compute the centroid of the whole formation in finite time. Then, based on the centroid estimation, a distributed control algorithm...

EnerGis: A geographical information based system for the evaluation of integrated energy conversion systems in urban areas

International Nuclear Information System (INIS)

Girardin, Luc; Marechal, Francois; Dubuis, Matthias; Calame-Darbellay, Nicole; Favrat, Daniel

2010-01-01

A geographical information system has been developed to model the energy requirements of an urban area. The purpose of the platform is to model with sufficient detail the energy services requirements of a given geographical area in order to allow the evaluation of the integration of advanced integrated energy conversion systems. This tool is used to study the emergence of more efficient cities that realize energy efficiency measures, integrate energy efficient conversion technologies and promote the use of endogenous renewable energy. The model is illustrated with case studies for the energetic planning of the Geneva district (Switzerland).

Geographical Distribution of Biomass Carbon in Tropical Southeast Asian Forests: A Database; TOPICAL

International Nuclear Information System (INIS)

Brown, S

2001-01-01

A database was generated of estimates of geographically referenced carbon densities of forest vegetation in tropical Southeast Asia for 1980. A geographic information system (GIS) was used to incorporate spatial databases of climatic, edaphic, and geomorphological indices and vegetation to estimate potential (i.e., in the absence of human intervention and natural disturbance) carbon densities of forests. The resulting map was then modified to estimate actual 1980 carbon density as a function of population density and climatic zone. The database covers the following 13 countries: Bangladesh, Brunei, Cambodia (Campuchea), India, Indonesia, Laos, Malaysia, Myanmar (Burma), Nepal, the Philippines, Sri Lanka, Thailand, and Vietnam. The data sets within this database are provided in three file formats: ARC/INFO(trademark) exported integer grids, ASCII (American Standard Code for Information Interchange) files formatted for raster-based GIS software packages, and generic ASCII files with x, y coordinates for use with non-GIS software packages

URBAN TRAFFIC ACCIDENT ANALYSIS BY USING GEOGRAPHIC INFORMATION SYSTEM

Directory of Open Access Journals (Sweden)

Meltem SAPLIOĞLU

2006-03-01

Full Text Available In recent years, traffic accidents that cause more social and economic losses than that of natural disasters,have become a national problem in Turkey. To solve this problem and to reduce the casualties, road safety programs are tried to be developed. It is necessary to develop the most effective measures with low investment cost due to limited budgets allocated to such road safety programs. The most important program is to determine dangerous locations of traffic accidents and to improve these sections from the road safety view point. New Technologies are driving a cycle of continuous improvement that causes rapid changes in the traffic engineering and any engineering services within it. It is obvious that this developed services will be the potential for forward-thinking engineering studies to take a more influence role. In this study, Geographic Information System (GIS was used to identify the hazardous locations of traffic accidents in Isparta. Isparta city map was digitized by using Arcinfo 7.21. Traffic accident reports occurred between 1998-2002 were obtained from Directory of Isparta Traffic Region and had been used to form the database. Topology was set up by using Crash Diagrams and Geographic Position Reference Systems. Tables are formed according to the obtained results and interpreted.

A generic coordinate system and a set of generic variables for MFE database

International Nuclear Information System (INIS)

Miner, W.H. Jr.; Ross, D.W.; Solano, E.R.; Valanju, P.M.; Wiley, J.C.

1993-01-01

Over the last several years, profile data from nine different tokamaks have been stored in the magnetic fusion energy database (MFEDB). These data sets have come from a variety of sources and most are given in different coordinate systems. In order to attempt any intermachine analysis, it is convenient to transform these data sets into one generic coordinate system and to choose a uniform set of variable names. The authors describe the data sets from each tokamak indicating the source of the data and the coordinate system in which it is given. Next, they discuss the generic coordinate that has been adopted and show how it is implemented for each tokamak. Finally, the generic naming convention that has been adopted is discussed. It follows closely that which was used by Christiansen et al. for the ITER Global Energy Confinement H-Mode Database. For further clarification, they discuss the characteristics of the magnetic geometry given a Fourier representation of the magnetic equilibria

FRS (Facility Registration System) Sites, Geographic NAD83, EPA (2007) [facility_registration_system_sites_LA_EPA_2007

Data.gov (United States)

Louisiana Geographic Information Center — This dataset contains locations of Facility Registry System (FRS) sites which were pulled from a centrally managed database that identifies facilities, sites or...

Conceptual Model of Dynamic Geographic Environment

Directory of Open Access Journals (Sweden)

Martínez-Rosales Miguel Alejandro

2014-04-01

Full Text Available In geographic environments, there are many and different types of geographic entities such as automobiles, trees, persons, buildings, storms, hurricanes, etc. These entities can be classified into two groups: geographic objects and geographic phenomena. By its nature, a geographic environment is dynamic, thus, it’s static modeling is not sufficient. Considering the dynamics of geographic environment, a new type of geographic entity called event is introduced. The primary target is a modeling of geographic environment as an event sequence, because in this case the semantic relations are much richer than in the case of static modeling. In this work, the conceptualization of this model is proposed. It is based on the idea to process each entity apart instead of processing the environment as a whole. After that, the so called history of each entity and its spatial relations to other entities are defined to describe the whole environment. The main goal is to model systems at a conceptual level that make use of spatial and temporal information, so that later it can serve as the semantic engine for such systems.

OLYMPUS DISS - A Readily Implemented Geographic Data and Information Sharing System

Science.gov (United States)

Necsoiu, D. M.; Winfrey, B.; Murphy, K.; McKague, H. L.

2002-12-01

Electronic information technology has become a crucial component of business, government, and scientific organizations. In this technology era, many enterprises are moving away from the perception that information repositories are only a tool for decision-making. Instead, many organizations are learning that information systems, which are capable of organizing and following the interrelations between information and both the short-term and strategic organizational goals, are assets themselves, with inherent value. Olympus Data and Information Sharing System (DISS) is a system developed at the Center for Nuclear Waste Regulatory Analyses (CNWRA) to solve several difficult tasks associated with the management of geographical, geological and geophysical data. Three of the tasks were to (1) gather the large amount of heterogeneous information that has accumulated over the operational lifespan of CNWRA, (2) store the data in a central, knowledge-based, searchable database and (3) create quick, easy, convenient, and reliable access to that information. Faced with these difficult tasks CNWRA identified the requirements for designing such a system. Key design criteria were: (a) ability to ingest different data formats (i.e., raster, vector, and tabular data); (b) minimal expense using open-source and commercial off-the-shelf software; (c) seamless management of geospatial data, freeing up time for researchers to focus on analyses or algorithm development, rather than on time consuming format conversions; (d) controlled access; and (e) scalable architecture to meet new and continuing demands. Olympus DISS is a solution that can be easily adapted to small and mid-size enterprises dealing with heterogeneous geographic data. It uses established data standards, provides a flexible mechanism to build applications upon and output geographic data in multiple and clear ways. This abstract is an independent product of the CNWRA and does not necessarily reflect the views or

Application of geographic information system for radiologic emergency response

International Nuclear Information System (INIS)

Best, R.G.; Doyle, J.F.; Mueller, P.G.

1998-01-01

Comprehensive and timely radiological, cultural, and environmental data are required in order to make informed decisions during a radiological emergency. Within the Federal Radiological Monitoring and Assessment Center (FRMAC), there is a continuing effort to improve the data management and communication process. The most recent addition to this essential function has been the development of the Field Analysis System for Emergency Response (FASER). It is an integrated system with compatible digital image processing and Geographic Information System (GIS) capabilities. FASER is configured with commercially available off-the-shelf hardware and software components. To demonstrate the potential of the FASER system for radiological emergency response, the system has been utilized in interagency FRMAC exercises to analyze the available spatial data to help determine the impact of a hypothetical radiological release and to develop mitigation plans. (R.P.)

Economic analysis of the cross-border coordination of operation in the European power system

International Nuclear Information System (INIS)

Janssen, Tanguy

2014-01-01

The electricity high voltage transmission networks are interconnected over most of the continents but this is not the case of the power system organizations. Indeed, as described with the concept of integrated power system, the organization over these large networks is divided by several kinds of internal borders. In this context, the research object, the cross-border coordination of operation, is a set of coordination arrangements over internal borders between differing regulatory, technical and market designs. These arrangements can include for instance the famous market couplings, some cost-sharing agreements or common security assessments among several other solutions. The existence and improvement of the cross-border coordination of operation can be beneficial to the whole integrated power system. This statement is verified in the European case as in 2012 where several regional and continental coordination arrangements are successfully implemented.In order to benefit from the European experience and contribute to support the European improvement process, this thesis investigates the cross-border coordination of operation in the European case with four angles of study. First, a modular framework is built to describe the existing solutions and the implementation choices from a regulatory point of view. Second, the thesis analyses the tools available to assess the impact of an evolution of the cross-border coordination. Third, the role of the European Union (EU) is described as critical both for the existing arrangements and to support the improvement process. The last angle of study focuses on two dimensions of the economic modes of coordination between transmission system operators. (author)

Managing environmental radioactivity monitoring data: a geographic information system approach

International Nuclear Information System (INIS)

Heywood, I.; Cornelius, S.

1993-01-01

An overview of the current British approach to environmental radiation monitoring is presented here, followed by a discussion of the major issues which would have to be considered in formulating a geographical information system (GIS) for the management of radiation monitoring data. Finally, examples illustrating the use of spatial data handling and automated cartographic techniques are provided from work undertaken by the authors. These examples are discussed in the context of developing a National Radiological Spatial Information System (NRSIS) demonstrator utilising GIS technology. (Author)

Geographic Information System (GIS) Applications at a Multi-Site Community College.

Science.gov (United States)

Pottle, Laura

This report presents the Front Range Community College (FRCC) (Colorado) Office of Institutional Research's recent expansion of its data analysis and reporting capabilities to include a geographic information system (GIS). Utilizing ArcView GIS software, the college is better able to visualize institutional and environmental data. They have…

Coordination dynamics in a socially situated nervous system

Directory of Open Access Journals (Sweden)

Charles A. Coey

2012-06-01

Full Text Available Traditional theories of cognitive science have typically accounted for the organization of human behavior by detailing the requisite computational or representational functions and identifying neurological mechanisms that might perform these functions. Put simply, such approaches hold that neural activity causes behavior. This same general framework has been extended to accounts of human social behavior via explanatory concepts such as common-coding and co-representation, and much recent neurological research has been devoted to brain structures that might execute these social-cognitive functions. Although these neural processes are unquestionably involved in the organization of human social interactions, there is good reason to question whether they should be accorded causal primacy. Specifically, research on interpersonal rhythmic motor coordination suggests that the organization of human behavior, including social behavior, can result from self-organizing processes and the lawful dynamics of animal-environment systems. Here we review this research, and in doing so propose that the role of the nervous system in joint action and interpersonal coordination be recast from the sole cause of behavior to one of many interdependent processes.

Geographic information systems : challenges to effective data sharing : statement of Linda D. Koontz, Director, Information management issues

Science.gov (United States)

2003-06-10

Geographic information systems (GIS) manipulate, analyze, and graphically present an array of information associated with geographic locations, have been invaluable to all levels of government. The federal government has long been attempting to devel...

Application of talairach coordinates for transcranial magnetic stimulation navigation system

International Nuclear Information System (INIS)

Ahn, Se-Jong; Kim, Jong-Woo; Sin, Sung-Wook; Yoo, Jin-Young; An, Hyojin; Chung, Sung-Taek; Yoon, Sejin

2011-01-01

Since the development of transcranial magnetic stimulation (TMS) in 1985, its clinical and experimental studies and therapeutic applications have been widely being investigated. MRI-based neuronavigational systems have been developed and used for positioning of the magnetic coil, which is the main problem of most TMS studies. The functional brain map provided by these systems, however, may be unsuitable for a population-based study since it does not describe the location of brain structures independent from individual differences in brain, and also, it would be difficult to localize particular point of brain since there is no reference point excepting anatomical structure. In this paper, neuronavigational approach of TMS and application of Talairach coordinate system are introduced. We expect that this concept of the system will allow not only to perform the population-based study taking individual anatomy into account, but also to help physician to localize specific point in the Talairach coordinates. (author)

The geographical information systems in the development of the municipal aqueducts

International Nuclear Information System (INIS)

Sanchez Rubiano, Maritza del Pilar; Sanchez Ipia, Alber Hamersson

2006-01-01

The geographic information systems can be used at the water/wastewater systems in order to systematize and optimize these public services. This task should be accomplished by applying an organized method and many other technologies, including GPS, ground penetrating radar topography, photogrametry, remote sensing and field inspection for collecting information. The project planning while applying such kind of method must be accordingly managed with the needs, which could have been previously obtained by direct evaluation at the business organization domain. In the same way, the geographic database design and implementation must take into account this needs in order to reflect the water system reality. The project achievements can be defined in terms of the GIS effectiveness, completeness, and users thrust on it and the support granted to the water enterprise managers. The stages of application development (including analysis, design, development and implementation), such as the map and report of the water network elements at any street intersection, must be oriented to the intranet and optionally the Internet. This document is the result of the experience of a cadastral and geodetic engineer teamwork, which wants to expose the importance and benefits at the operative, administrative and economic level that GIS implementation and maintenance offers, in the Colombian water/waste-water systems

DESIGN COORDINATION IN DISTRIBUTED ENVIRONMENTS USING VIRTUAL REALITY SYSTEMS

Directory of Open Access Journals (Sweden)

Rusdi HA

2003-01-01

Full Text Available This paper presents a research project, which investigates the use of virtual reality and computer communication technology to facilitate building design coordination in distributed environments. The emphasis of the system, called VR-based DEsign COordination (VRDECO is providing a communication tool that can be used by remote designers for settling ideas before they fully engage in concurrent engineering environments. VRDECO provides the necessary design tools, library of building elements and communication procedures, for designers from remote places to perform and coordinate their initial tasks. It has been implemented using available commercial software packages, and is used in designing a simple house. VRDECO facilitates the creation a preliminary design and simple communication with the client. There are, however, some difficulties in the development of the full version of VRDECO, i.e.: creating an adequate number of building elements, building specification database with a sufficient number of choices, and establishing a systematic rule to determine the parts of a building that are updateable.

Storytelling in Interactive 3D Geographic Visualization Systems

Directory of Open Access Journals (Sweden)

Matthias Thöny

2018-03-01

Full Text Available The objective of interactive geographic maps is to provide geographic information to a large audience in a captivating and intuitive way. Storytelling helps to create exciting experiences and to explain complex or otherwise hidden relationships of geospatial data. Furthermore, interactive 3D applications offer a wide range of attractive elements for advanced visual story creation and offer the possibility to convey the same story in many different ways. In this paper, we discuss and analyze storytelling techniques in 3D geographic visualizations so that authors and developers working with geospatial data can use these techniques to conceptualize their visualization and interaction design. Finally, we outline two examples which apply the given concepts.

Integrating Geographic Information Systems in Business School Curriculum: An Initial Example

Science.gov (United States)

King, Michael A.; Arnette, Andrew N.

2011-01-01

Geographic information systems have experienced rapid growth and user adoption over the last four decades, due to an increasing value to the business community. However, business schools are not teaching geospatial concepts and the related location intelligence to their students. This curriculum decision seems completely at odds with business'…

About local fractional three-dimensional compressible Navier-Stokes equations in Cantor-type cylindrical co-ordinate system

Directory of Open Access Journals (Sweden)

Gao Guo-Ping

2016-01-01

Full Text Available In this article, we investigate the local fractional 3-D compressible Navier-Stokes equation via local fractional derivative. We use the Cantor-type cylindrical co-ordinate method to transfer 3-D compressible Navier-Stokes equation from the Cantorian co-ordinate system to the Cantor-type cylindrical co-ordinate system.

Compressing interpreted satellite imagery for geographic information systems applications over extensive regions

Science.gov (United States)

Miller, Stephan W.

1981-01-01

Image processing systems (IPS) and techniques effectively transform satellite imagery into data for input into a spatial database. Geographic information systems (GIS), consisting of graphic input and spatial database management subsystems, are capable of processing digital map and map overlay data to build and manipulate a spatial database. These systems can be successfully integrated to create a successful spatial data handling capability provided certain obstacle are understood and overcome.

Electrical alignment of antenna coordinate system in a planar near-field setup

DEFF Research Database (Denmark)

Mynster, Anders P.; Nielsen, Jeppe Majlund; Pivnenko, Sergey

2011-01-01

In this paper, a simple and efficient electrical alignment procedure known as flip-test is adapted and applied to check and correct two errors in the mechanical setup of a planar near-field system: the mis-pointing of the z-axis of the antenna coordinate system with respect to the scan plane...... and the displacement of the center point of the scan plane with respect to the z-axis of the antenna coordinate system. Simulations of the errors and their correction algorithms were carried out with different models of antennas composed of Hertzian dipoles and an optimum algorithm was then selected. The proposed...

Interference Aware Inter-Cell Rank Coordination for 5G Systems

DEFF Research Database (Denmark)

Mahmood, Nurul Huda; Pedersen, Klaus I.; Mogensen, Preben Elgaard

2017-01-01

at balancing the trade-off between increasing the spatial multiplexing gain through independent streams, or improving the interference resilience property. An interference aware inter-cell rank coordination framework for the future fifth generation wireless system is proposed in this article. The proposal...... resilience trade-off. Centralized and distributed implementations of the proposed inter-cell rank coordination framework are presented, followed by exhaustive Monte Carlo simulation results demonstrating its performance. The obtained results indicate that the performance of the proposed method is up to 56...

Regional Geographic Information Systems of Health and Environmental Monitoring

Directory of Open Access Journals (Sweden)

Kurolap Semen A.

2016-12-01

Full Text Available The article describes a new scientific and methodological approach to designing geographic information systems of health and environmental monitoring for urban areas. Geographic information systems (GIS are analytical tools of the regional health and environmental monitoring; they are used for an integrated assessment of the environmental status of a large industrial centre or a part of it. The authors analyse the environmental situation in Voronezh, a major industrial city, located in the Central Black Earth Region with a population of more than 1 million people. The proposed research methodology is based on modern approaches to the assessment of health risks caused by adverse environmental conditions. The research work was implemented using a GIS and multicriteria probabilistic and statistical evaluation to identify cause-and-effect links, a combination of action and reaction, in the dichotomy ‘environmental factors — public health’. The analysis of the obtained statistical data confirmed an increase in childhood diseases in some areas of the city. Environmentally induced diseases include congenital malformations, tumors, endocrine and urogenital pathologies. The main factors having an adverse impact on health are emissions of carcinogens into the atmosphere and the negative impact of transport on the environment. The authors identify and characterize environmentally vulnerable parts of the city and developed principles of creating an automated system of health monitoring and control of environmental risks. The article offers a number of measures aimed at the reduction of environmental risks, better protection of public health and a more efficient environmental monitoring.

Conversion of Hanford site well locations to Washington coordinate system of 1983, South Zone 1991 (WCS83S)

International Nuclear Information System (INIS)

Burnett, R.A.; Tzemos, S.; Dietz, L.A.

1993-12-01

Past construction and survey practices have resulted in the use of multiple local coordinate systems for measuring and reporting the horizontal position of wells and other facilities and locations on the Hanford Site. This report describes the development of a coordinate transformation process and algorithm and its application to the conversion of the horizontal coordinates of Hanford site wells from the various local coordinate systems and datums to a single standard coordinate system, the Washington Coordinate system of 1983, South Zone 1991 (WCS83S). The coordinate transformation algorithm, implemented as a computer program called CTRANS, uses standard two-dimensional translation, rotation, and scaling transformation equations and can be applied to any set of horizontal point locations. For each point to be transformed, the coefficients of the transformation equations are calculated locally, using the coordinates of the three nearest registration points (points with known locations in both coordinate systems). The report contains a discussion of efforts to verify and validate both the software and the well location data, a description of the methods used to estimate transformation and registration point accuracy, instructions for using the computer program, and a summary of the Hanford well conversion results for each local coordinate system and datum. Also included are the results of using recent U.S. Army Corps of Engineers survey data to obtain estimated measures of location errors in wells for which the local coordinate data source is undocumented, unverified, and therefore of unknown accuracy

Handbook on advances in remote sensing and geographic information systems paradigms and applications in forest landscape modeling

CERN Document Server

Favorskaya, Margarita N

2017-01-01

This book presents the latest advances in remote-sensing and geographic information systems and applications. It is divided into four parts, focusing on Airborne Light Detection and Ranging (LiDAR) and Optical Measurements of Forests; Individual Tree Modelling; Landscape Scene Modelling; and Forest Eco-system Modelling. Given the scope of its coverage, the book offers a valuable resource for students, researchers, practitioners, and educators interested in remote sensing and geographic information systems and applications.

Objective Evaluation in an Online Geographic Information System Certificate Program

OpenAIRE

Scott L. WALKER

2005-01-01

Objective Evaluation in an Online Geographic Information System Certificate Program Asst. Professor. Dr. Scott L. WALKER Texas State University-San Marcos San Marcos, Texas, USA ABSTRACT Departmental decisions regarding distance education programs can be subject to subjective decision-making processes influenced by external factors such as strong faculty opinions or pressure to increase student enrolment. This paper outlines an evaluation of a departmental distance-education program....

The use of geographical information systems in socio-economic studies

OpenAIRE

Daplyn, P.; Cropley, J.; Treagust, S.; Gordon, A.

1994-01-01

Geographical information systems (GIS) have found wide and growing applications, as digital remote-sensing data and computer technology have become more sophisticated, more easily available and less expensive. NRI recently undertook preliminary research into potential socio-economic applications of GIS. The feasibility of utilizing spatial data, available in GIS, to model socio-economic relationships was examined. It included the following steps: (a) identification of hypothetical relationshi...

COORDINATION IN MULTILEVEL NETWORK-CENTRIC CONTROL SYSTEMS OF REGIONAL SECURITY: APPROACH AND FORMAL MODEL

Directory of Open Access Journals (Sweden)

A. V. Masloboev

2015-01-01

Full Text Available The paper deals with development of methods and tools for mathematical and computer modeling of the multilevel network-centric control systems of regional security. This research is carried out under development strategy implementation of the Arctic zone of the Russian Federation and national safeguarding for the period before 2020 in the Murmansk region territory. Creation of unified interdepartmental multilevel computer-aided system is proposed intended for decision-making information support and socio-economic security monitoring of the Arctic regions of Russia. The distinctive features of the investigated system class are openness, self-organization, decentralization of management functions and decision-making, weak hierarchy in the decision-making circuit and goal generation capability inside itself. Research techniques include functional-target approach, mathematical apparatus of multilevel hierarchical system theory and principles of network-centric control of distributed systems with pro-active components and variable structure. The work considers network-centric management local decisions coordination problem-solving within the multilevel distributed systems intended for information support of regional security. The coordination problem-solving approach and problem formalization in the multilevel network-centric control systems of regional security have been proposed based on developed multilevel recurrent hierarchical model of regional socio-economic system complex security. The model provides coordination of regional security indexes, optimized by the different elements of multilevel control systems, subject to decentralized decision-making. The model specificity consists in application of functional-target technology and mathematical apparatus of multilevel hierarchical system theory for coordination procedures implementation of the network-centric management local decisions. The work-out and research results can find further

Optimal coordination of distance and over-current relays in series compensated systems based on MAPSO

International Nuclear Information System (INIS)

Moravej, Zahra; Jazaeri, Mostafa; Gholamzadeh, Mehdi

2012-01-01

Highlight: ► Optimal coordination problem between distance relays and Directional Over-Current Relays (DOCRs) is studied. ► A new problem formulation for both uncompensated and series compensated system is proposed. ► In order to solve the coordination problem a Modified Adaptive Particle Swarm Optimization (MAPSO) is employed. ► The optimum results are found in both uncompensated and series compensated systems. - Abstract: In this paper, a novel problem formulation for optimal coordination between distance relays and Directional Over-Current Relays (DOCRs) in series compensated systems is proposed. The integration of the series capacitor (SC) into the transmission line makes the coordination problem more complex. The main contribution of this paper is a new systematic method for computing the optimal second zone timing of distance relays and optimal settings of DOCRs, in series compensated and uncompensated transmission systems, which have a combined protection scheme with DOCRs and distance relays. In order to solve this coordination problem, which is a nonlinear and non-convex problem, a Modified Adaptive Particle Swarm Optimization (MAPSO) is employed. The new proposed method is supported by obtained results from a typical test case and a real power system network.

The Design of Data Disaster Recovery of National Fundamental Geographic Information System

Science.gov (United States)

Zhai, Y.; Chen, J.; Liu, L.; Liu, J.

2014-04-01

With the development of information technology, data security of information system is facing more and more challenges. The geographic information of surveying and mapping is fundamental and strategic resource, which is applied in all areas of national economic, defence and social development. It is especially vital to national and social interests when such classified geographic information is directly concerning Chinese sovereignty. Several urgent problems that needs to be resolved for surveying and mapping are how to do well in mass data storage and backup, establishing and improving the disaster backup system especially after sudden natural calamity accident, and ensuring all sectors rapidly restored on information system will operate correctly. For overcoming various disaster risks, protect the security of data and reduce the impact of the disaster, it's no doubt the effective way is to analysis and research on the features of storage and management and security requirements, as well as to ensure that the design of data disaster recovery system suitable for the surveying and mapping. This article analyses the features of fundamental geographic information data and the requirements of storage management, three site disaster recovery system of DBMS plan based on the popular network, storage and backup, data replication and remote switch of application technologies. In LAN that synchronous replication between database management servers and the local storage of backup management systems, simultaneously, remote asynchronous data replication between local storage backup management systems and remote database management servers. The core of the system is resolving local disaster in the remote site, ensuring data security and business continuity of local site. This article focuses on the following points: background, the necessity of disaster recovery system, the analysis of the data achievements and data disaster recovery plan. Features of this program is to use a

76 FR 41855 - Columbus Geographic Systems (GIS) Ltd.; Order of Suspension of Trading

Science.gov (United States)

2011-07-15

... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] Columbus Geographic Systems (GIS) Ltd.; Order of Suspension of Trading July 13, 2011. It appears to the Securities and Exchange Commission that... Systems (GIS) Ltd. because it has not filed any periodic reports since the period ended June 30, 2008. The...

ENVIRONMENTAL PROBLEM SOLVING WITH GEOGRAPHIC INFORMATION SYSTEMS: 1994 AND 1999 CONFERENCE PROCEEDINGS

Science.gov (United States)

These two national conferences, held in Cincinnati, Ohio in 1994 and 1999, addressed the area of environmental problem solving with Geographic Information Systems. This CD-ROM is a compilation of the proceedings in PDF format. The emphasis of the conference presentations were on ...

Application of geographic information systems to waste minimization efforts at the national laboratories

International Nuclear Information System (INIS)

Lyttle, T.W.; Smith, D.M.; Burns, M.; Weinrach, J.B.

1993-01-01

At Los Alamos National Laboratory (LANL), facility waste streams tend to be small but highly diverse. Initial characterization of such waste streams is often difficult in part due to a lack of tools to assist the generators themselves in completing such assessments. A methodology has been developed at LANL to allow process knowledgeable field personnel to develop baseline waste generation assessments and to evaluate potential waste minimization technology. This Process Waste Assessment (PWA) system is an application constructed within the Process Modeling System and currently being integrated with the InFoCAD Geographic Information System (GIS). The Process Modeling System (PMS) is an object-oriented, mass balance-based, discrete-event simulation framework written using the Common Lisp Object System (CLOS). Analytical capabilities supported within the PWA system include: complete mass balance specifications, historical characterization of selected waste stream and generation of facility profiles for materials consumption, resource utilization and worker exposure. Development activities include integration with the LANL facilities management Geographic Information System (GIS) and provisions for a Best Available Technologies (BAT) database. The environments used to develop these assessment tools will be discussed in addition to a review of initial implementation results

Pursit-evasion game analysis in a line of sight coordinate system

Science.gov (United States)

Shinar, J.; Davidovitz, A.

1985-01-01

The paper proposes to use line of sight coordinates for the analysis of pursuit-evasion games. The advantage of this method for two-target games is shown to be evident. As a demonstrative example the game of two identical cars is formulated and solved in such coordinate systems. A new type of singular surface, overlooked in a previous study of the same problem, is discovered as a consequence of the simplicity of the solution.

A Control Architecture to Coordinate Renewable Energy Sources and Energy Storage Systems in Islanded Microgrids

DEFF Research Database (Denmark)

Wu, Dan; Tang, Fen; Dragicevic, Tomislav

2015-01-01

Coordinated operation of microgrids requires that energy management system takes into account both the available power in renewable energy sources (RES) and storage capacity of energy storage systems (ESS). In this paper, a coordinated architecture of islanded AC microgrids with smooth switching...

What Influences Geography Teachers' Usage of Geographic Information Systems? A Structural Equation Analysis

Science.gov (United States)

Lay, Jinn-Guey; Chi, Yu-Lin; Hsieh, Yeu-Sheng; Chen, Yu-Wen

2013-01-01

Understanding the usage of the geographic information system (GIS) among geography teachers is a crucial step in evaluating the current dissemination of GIS knowledge and skills in Taiwan's educational system. The primary contribution of this research is to further our understanding of the factors that affect teachers' GIS usage. The structural…

The application of geographic information system (GIS) in forensics geoscience

OpenAIRE

McKinley, Jennifer

2017-01-01

Advances in technological developments in Geographic Information Systems (GIS) has enabled the application of GIS in landscape mapping, environmental management, natural hazard risk and disaster management. As geographi- cal information becomes more widely available through satel- lite and aerial imagery, the cost of software decreases and GIS expertise expands, it is most likely that the use of GIS will increase. The methodology has practical applications for police, crime scene investigator...

On three-dimensional incompressible Navier-Stokes fluid on cantor sets in spherical Cantor type co-ordinate system

Directory of Open Access Journals (Sweden)

Meng Zhi-Jun

2016-01-01

Full Text Available This paper addresses the systems of the incompressible Navier-Stokes equations on Cantor sets without the external force involving the fractal heat-conduction problem vial local fractional derivative. The spherical Cantor type co-ordinate method is used to transfer the incompressible Navier-Stokes equation from the Cantorian co-ordinate system into the spherical Cantor type co-ordinate system.

Wide Area Coordinated Control of Multi-FACTS Devices to Damp Power System Oscillations

Directory of Open Access Journals (Sweden)

Shiyun Xu

2017-12-01

Full Text Available Aiming at damping the inter-area oscillations of power systems, the present study proposes a wide-area decentralized coordinated control framework, where the upper-level controller is designed to coordinate the lower-level multiple FACTS devices. Based on the polytopic differential inclusion method, the derived controller adopts a decentralized structure and it is guaranteed to be robust to meet the demand of operation under multiple operating conditions. Since time delay of wide area signal transmission is inevitable, in what follows, the quantum evolution algorithm (QEA method is introduced to find an optimal solution of the time-delay coordinated controller. In this regard, the stability of the system with a prescribed time delay is guaranteed and the system damping ratio is increased. Effectiveness and applicability of the proposed controller design methods have been demonstrated through numerical simulations.

Systems-based modeling of generation variability under alternate geographic configurations of photovoltaic (PV) installations in Virginia

International Nuclear Information System (INIS)

Collins, Ross D.; Crowther, Kenneth G.

2011-01-01

With increased focus on renewable energy in our modern era, it is increasingly important to understand the impact of policies on the performance and reliability of regional energy systems. This research develops a model to understand how geographic dispersion of PV installations impacts the reliability of electricity generated from the total PV network, measured by the variance of the distribution of generated electricity. Using NREL data, beta probability distributions of sunlight (kWh/m 2 /day) in various regions of Virginia are estimated using a fitting method that minimizes the Kolmogorov-Smirnov test statistic. A Monte Carlo simulation model is developed to measure PV electricity generation from multiple centralized and dispersed configurations over 100,000 days of probabilistic sunlight. There is a calculable tradeoff between average generation and generation variability, and increased geographic dispersion of PV installations can decrease this variability. Controlling variable generation through policies that promote efficient PV siting can help provide reliable power, minimizing the need for load-balancing peaking power infrastructure and costly electricity purchases from the grid. Using a tradeoff framework of generation and costs, this paper shows that geographically dispersed generation can mitigate the risk of unreliable solar generation that can significantly impact the end-user costs and make PV infrastructure unattractive. - Highlights: → We model how uncertain sunlight affects generation of different PV systems. → We show that geographically dispersed systems decrease generation variability. → Geographically dispersed PV systems are potentially more costly in the short run. → Controlling variability provides reliable power, which can decrease long-run costs. → Promoting mixes of uncertain energy sources requires assessment of these tradeoffs.

Building Management Information Systems to Coordinate Citywide Afterschool Programs: A Toolkit for Cities. Executive Summary

Science.gov (United States)

Kingsley, Chris

2012-01-01

This executive summary describes highlights from the report, "Building Management Information Systems to Coordinate Citywide Afterschool Programs: A Toolkit for Cities." City-led efforts to build coordinated systems of afterschool programming are an important strategy for improving the health, safety and academic preparedness of children…

Pavement Management Systems Application with Geographic Information System Method

Directory of Open Access Journals (Sweden)

Nihat MOROVA

2016-04-01

Full Text Available In this study, performance models were developed. Software in Visual Basic programming language was used for the developed model. Using the software, both the present condition of the pavement can be examined and future performance based on expected traffic values can be predicted. So, the software can be used at both network and project level. Cost and benefit values taken from the literature were used in determining the cost-benefit ratio. Using the genetic algorithm approach, a computer program in Visual Basic programming language was written. Using the model developed, a five-year maintenance and rehabilitation program can be planned for a given database considering budget restraints. The developed models were merged by writing Geographic Information System (GIS software in order to show the effectiveness of models and adopt the models into a GIS. For this purpose, a case study of GIS was exposed. The control of the overall system can be applied in addition to the application of the model at network level. The developed software allows data to be transferred to the database, analyses and different scenario applications for showing GIS results.

Residue-based Coordinated Selection and Parameter Design of Multiple Power System Stabilizers (PSSs)

DEFF Research Database (Denmark)

Su, Chi; Hu, Weihao; Fang, Jiakun

2013-01-01

data from time domain simulations. Then a coordinated approach for multiple PSS selection and parameter design based on residue method is proposed and realized in MATLAB m-files. Particle swarm optimization (PSO) is adopted in the coordination process. The IEEE 39-bus New England system model...

The Dynamic Coordinated Development of a Regional Environment-Tourism-Economy System: A Case Study from Western Hunan Province, China

Directory of Open Access Journals (Sweden)

Yaoqing Yuan

2014-08-01

Full Text Available Based on regional coordination theory and system theory, the authors constructed an evaluation index system for the coordinated development of a regional environment-tourism-economy system with a pressure-state-response (PSR model. With a coordinated development model, it further empirically analyzed the coordinated development state of an environment-tourism-economy system in western Hunan from 2001 to 2012. The results showed that, although this environment-tourism-economy system failed to achieve a high benefit index, inter-subsystem coupling extent, and coordinated development index, the three indices presented an increasing overall trend. This outcome suggested that the sub-systems in this system were developing towards their optimal proportions: the development of these sub-systems (environmental, tourism, and economic was unbalanced in western Hunan. The environment therein sees only slow development although provided with a favorable ecological foundation. Economic development, which has long been lagging, acted as the main factor restricting the coordinated development of a regional environment-tourism-economy system. To promote its coordinated development in western Hunan, the following recommendations were proposed: strengthen the prediction and warnings on the evolution of the whole system; optimize the industry’s structure; reinforce environmental management.

A database paradigm for the management of DICOM-RT structure sets using a geographic information system

International Nuclear Information System (INIS)

Shao, Weber; Kupelian, Patrick A; Wang, Jason; Low, Daniel A; Ruan, Dan

2014-01-01

We devise a paradigm for representing the DICOM-RT structure sets in a database management system, in such way that secondary calculations of geometric information can be performed quickly from the existing contour definitions. The implementation of this paradigm is achieved using the PostgreSQL database system and the PostGIS extension, a geographic information system commonly used for encoding geographical map data. The proposed paradigm eliminates the overhead of retrieving large data records from the database, as well as the need to implement various numerical and data parsing routines, when additional information related to the geometry of the anatomy is desired.

A database paradigm for the management of DICOM-RT structure sets using a geographic information system

Science.gov (United States)

Shao, Weber; Kupelian, Patrick A.; Wang, Jason; Low, Daniel A.; Ruan, Dan

2014-03-01

We devise a paradigm for representing the DICOM-RT structure sets in a database management system, in such way that secondary calculations of geometric information can be performed quickly from the existing contour definitions. The implementation of this paradigm is achieved using the PostgreSQL database system and the PostGIS extension, a geographic information system commonly used for encoding geographical map data. The proposed paradigm eliminates the overhead of retrieving large data records from the database, as well as the need to implement various numerical and data parsing routines, when additional information related to the geometry of the anatomy is desired.

Considerazioni sui nuovi servizi di conversione di coordinate del Geoportale Nazionale

Directory of Open Access Journals (Sweden)

Roberto Rossi

2013-04-01

Full Text Available La pubblicazione dei sistemi di conversione di coordinate sul Geoportale Nazionale ha suscitato commenti in generale positivi, ma anche qualche critica da parte degli utenti. Chiscrive auspica che i grigliati IGM, in un prossimo futuro, entrino a far parte del patrimonio dei dati pubblici e aperti del nostro paese. Ritiene però che, in attesa che i tempi siano maturi perquesto passaggio, i servizi di conversione del Geoportale Nazionale siano un preziosissimo strumento a disposizione di tutti...Publication of conversion systems of coordinates on the National Geoportal has attracted positive comments in general, but also some criticism by users.The author hopes that transformation grids owned by Italian Military Geographic Institute will be soon available as Open Data. Anyway he believes that, meanwhile, conversion and transformation services offered by National Geoportal are precious tools accessible to everyone. 

Analysis Of Educational Services Distribution-Based Geographic Information System GIS

OpenAIRE

Waleed Lagrab; Noura AKNIN

2015-01-01

Abstract This study analyzes the spatial distribution of kindergarten facilities in the study area based on the Geographic Information Systems GIS in order to test an efficiency of GIS technology to redistribute the existing kindergarten and choose the best location in the future and applying the standard criteria for selecting the suitable locations for kindergarten. To achieve this goal the data and information are collected via interviews and comprehensive statistics on the education facil...

An Allometric Algorithm for Fractal-Based Cobb-Douglas Function of Geographical Systems

Directory of Open Access Journals (Sweden)

Hongyu Luo

2014-01-01

Full Text Available The generalized Cobb-Douglas production function has been derived from a general input-output relation based on fractality assumptions. It was proved to be a useful self-affine model for geographical analysis. However, the ordinary least square calculation is always an ineffectual method for the Cobb-Douglas modeling because of the multicollinearity in the logarithmic linear regression. In this paper, a novel approach is proposed to build the geographical Cobb-Douglas models. Combining the concept of allometric scaling with the linear regression technique, we obtain a simple algorithm that can be employed to estimate the parameters of the Cobb-Douglas function. As a case, the algorithm and models are applied to the public transportation of China’s cities, and the results validate the allometric algorithm. A conclusion can be drawn that the allometric analysis is an effective way of modeling geographical systems with the general Cobb-Douglas function. This study is significant for integrating the notions of allometry, fractals, and scaling into a new framework to form a quantitative methodology of spatial analysis.

Radar Precoder Design for Spectral Coexistence with Coordinated Multi-point (CoMP) System

OpenAIRE

Mahal, Jasmin A.; Khawar, Awais; Abdelhadi, Ahmed; Clancy, T. Charles

2015-01-01

This paper details the design of precoders for a MIMO radar spectrally coexistent with a MIMO cellular network. We focus on a coordinated multi-point (CoMP) system where a cluster of base stations (BSs) coordinate their transmissions to the intended user. The radar operates in two modes, interference-mitigation mode when it avoids interference with the CoMP system and cooperation mode when it exchanges information with it. Using either the conventional Switched Null Space Projection (SNSP) or...

Motor coordination uses external spatial coordinates independent of developmental vision.

Science.gov (United States)

Heed, Tobias; Röder, Brigitte

2014-07-01

The constraints that guide bimanual movement coordination are informative about the processing principles underlying movement planning in humans. For example, symmetry relative to the body midline benefits finger and hand movements independent of hand posture. This symmetry constraint has been interpreted to indicate that movement coordination is guided by a perceptual code. Although it has been assumed implicitly that the perceptual system at the heart of this constraint is vision, this relationship has not been tested. Here, congenitally blind and sighted participants made symmetrical and non-symmetrical (that is, parallel) bimanual tapping and finger oscillation movements. For both groups, symmetrical movements were executed more correctly than parallel movements, independent of anatomical constraints like finger homology and hand posture. For the blind, the reliance on external spatial factors in movement coordination stands in stark contrast to their use of an anatomical reference frame in perceptual processing. Thus, the externally coded symmetry constraint evident in bimanual coordination can develop in the absence of the visual system, suggesting that the visual system is not critical for the establishment of an external-spatial reference frame in movement coordination. Copyright © 2014 Elsevier B.V. All rights reserved.

On the Internal Model Principle in the Coordination of Nonlinear Systems

NARCIS (Netherlands)

De Persis, C.; Jayawardhana, B.

2014-01-01

The role of the internal model principle is investigated in this paper for the coordination of relative-degree-one and relative-degree-two nonlinear systems. For relative-degree-one systems that are incrementally (output-feedback) passive, we propose internal-model-based distributed control laws

Geographic information system in marine biology: Way for sustainable utilization of living resources

Digital Repository Service at National Institute of Oceanography (India)

Chavan, V.S.; Sreepada, R.A.

Sustainable utilization of aquatic living resources needs accurate assessment. This stress the need for use of Geographic Information System (GIS). In the recent past interest has been generated for use of GIS in various areas of biological...

Transportation Routing Analysis Geographic Information System -- TRAGIS, progress on improving a routing tool

International Nuclear Information System (INIS)

Johnson, P.E.; Lester, P.B.

1998-05-01

The Transportation Routing Analysis Geographic Information System (TRAGIS) model provides a useful tool to calculate and analyze transportation routes for radioactive materials within the continental US. This paper outlines some of the features available in this model

Coordinated Optimization of Distributed Energy Resources and Smart Loads in Distribution Systems: Preprint

Energy Technology Data Exchange (ETDEWEB)

Yang, Rui; Zhang, Yingchen

2016-08-01

Distributed energy resources (DERs) and smart loads have the potential to provide flexibility to the distribution system operation. A coordinated optimization approach is proposed in this paper to actively manage DERs and smart loads in distribution systems to achieve the optimal operation status. A three-phase unbalanced Optimal Power Flow (OPF) problem is developed to determine the output from DERs and smart loads with respect to the system operator's control objective. This paper focuses on coordinating PV systems and smart loads to improve the overall voltage profile in distribution systems. Simulations have been carried out in a 12-bus distribution feeder and results illustrate the superior control performance of the proposed approach.

Regionalism and Statewide Coordination of Postsecondary Education. Report No. 26.

Science.gov (United States)

Martorana, S. V.; McGuire, W. Gary

Initial findings are reported of a continuing study of a new American postsecondary educational planning and coordination concept and its implementation: regionalism and regionalization. Regionalism is defined as that view of a geographic subsection of a state or of several adjoining states that considers all or a number of the postsecondary…

Threedimensional system of coordinates used at CERN

International Nuclear Information System (INIS)

Gervaise, J.; Mayoud, M.; Menant, E.

1976-01-01

This report is a complete account of the transformations and corrections necessary for geodetic quantities, whether directly measured or derived, before they can be entered into calculations involving the basic reference system used at CERN. A special type of projection (orthographic projection) has been developed, with the aim that it be the best possible for the geodetic system employed for the Super Proton Synchrotron (SPS) whilst retaining the basic possibilities provided for the Proton Synchrotron (PS) and the Intersecting Storage Rings (ISR). The coordinate system in which the geometry of particle beams is defined is necessarily Cartesian. This feature, although mathematically simple, has a number of consequences for the treatment of measurements which are physically connected with the shape of the Earth. Details of the orthographic projection, the planimetry, and the altimetry are given. (Author) [fr

Geographic information systems - tool for evaluation of the hydro-energy performance of water supply systems

OpenAIRE

Aline Christian Pimentel Almeida Santos; José Almir Rodrigues Pereira; Augusto da Gama Rego; Rogério da Silva Santos

2017-01-01

The most relevant challenges in the water supply system (WSS) are high water losses and the waste of electric energy. This paper aimed to assess the capacity of the Geographic Information System (GIS) in the analysis of the hydro-energy performance of WSSs. The Stage 1 comprises the selection of data and the respective hydro-energy indexes are defined; cartographic data are defined in Stage 2 and a geo-referenced database is constructed in Stage 3. In the stage 4, the data of the Central Wate...

Coordinating a multi-retailer decentralized distribution system with random demand based on buyback and compensation contracts

Directory of Open Access Journals (Sweden)

Jinyu Ren

2015-01-01

Full Text Available Purpose: The purpose of this paper is to set up the coordinating mechanism for a decentralized distribution system consisting of a manufacturer and multiple independent retailers by means of contracts. It is in the two-stage supply chain system that all retailers sell an identical product made by the manufacturer and determine their order quantities which directly affect the expected profit of the supply chain with random demand. Design/methodology/approach: First comparison of the optimal order quantities in the centralized and decentralized system shows that the supply chain needs coordination. Then the coordination model is given based on buyback cost and compensation benefit. Finally the coordination mechanism is set up in which the manufacturer as the leader uses a buyback policy to incentive these retailers and the retailers pay profit returns to compensate the manufacturer. Findings: The results of a numerical example show that the perfect supply chain coordination and the flexible allocation of the profit can be achieved in the multi-retailer supply chain by the buyback and compensation contracts. Research limitations: The results based on assumptions might not completely hold in practice and the paper only focuses on studying a single product in two-stage supply chain. Practical implications: The coordination mechanism is applicable to a realistic supply chain under a private information setting and the research results is the foundation of further developing the coordination mechanism for a realistic multi-stage supply chain system with more products. Originality/value: This paper focused on studying the coordination mechanism for a decentralized multi-retailer supply chain by the joint application of the buyback and compensation contracts. Furthermore the perfect supply chain coordination and the flexible allocation of the profit are achieved.

Efficient Messaging through Cluster Coordinators in Decentralized Controlled Material Flow Systems

Directory of Open Access Journals (Sweden)

Lieberoth-Leden Christian

2016-01-01

Full Text Available The modularization of the hard- and software is one approach handling the demand for increasing flexibility and changeability of automated material flow systems. A control that is distributed across several different hardware controllers leads to a great demand for coordination between the modules while planning for example transports, especially if there is a mutual dependency between the modules on the executing tasks. Short-term changes in planning often initiate a rescheduling chain reaction, which causes a high communication load in the system. In the presented approach, module clusters with a centralized coordinator are automatically formed out of multiple modules and substitutional take over the surrounding communication for the modules. As a result, they minimize exchanged messages by focusing on the essential information.

Genetic characterization of Bombyx mori (Lepidoptera: Bombycidae) breeding and hybrid lines with different geographic origins.

Science.gov (United States)

Furdui, Emilia M; Mărghitaş, Liviu A; Dezmirean, Daniel S; Paşca, Ioan; Pop, Iulia F; Erler, Silvio; Schlüns, Ellen A

2014-01-01

The domesticated silkworm Bombyx mori L. comprises a large number of geographical breeds and hybrid lines. Knowing the genetic structure of those may provide information to improve the conservation of commercial lines by estimating inbreeding over generations and the consequences of excessive use of those lineages. Here, we analyzed the genetic diversity of seven breeds and eight hybrid lines from Eastern Europe and Asia using highly polymorphic microsatellites markers to determine its genetical impact on their use in global breeding programs. No consistent pattern of deviation from Hardy-Weinberg equilibrium was found for most breed and hybrids; and the absence of a linkage disequilibrium also suggests that the strains are in equilibrium. A principal coordinate analysis revealed a clear separation of two silkworm breeds from the rest: one (IBV) originated from India and the other one (RG90) from Romania/Japan. The tendency of the other breeds from different geographic origins to cluster together in a general mix might be due to similar selection pressures (climate and anthropogenic factors) in different geographic locations. Phylogenetic analyses grouped the different silkworm breeds but not the hybrids according to their geographic origin and confirmed the pattern found in the principal coordinate analysis. © The Author 2014. Published by Oxford University Press on behalf of the Entomological Society of America.

Harnessing Geographic Information Systems (GIS) to enable community-oriented primary care.

Science.gov (United States)

Bazemore, Andrew; Phillips, Robert L; Miyoshi, Thomas

2010-01-01

Despite growing acceptance and implementation of geographic information systems (GIS) in the public health arena, its utility for clinical population management and coordination by leaders in a primary care clinical health setting has been neither fully realized nor evaluated. In a primary care network of clinics charged with caring for vulnerable urban communities, we used GIS to (1) integrate and analyze clinical (practice management) data and population (census) data and (2) generate distribution, service area, and population penetration maps of those clinics. We then conducted qualitative evaluation of the responses of primary care clinic leaders, administrators, and community board members to analytic mapping of their clinic and regional population data. Practice management data were extracted, geocoded, and mapped to reveal variation between actual clinical service areas and the medically underserved areas for which these clinics received funding, which was surprising to center leaders. In addition, population penetration analyses were performed to depict patterns of utilization. Qualitative assessments of staff response to the process of mapping clinical and population data revealed enthusiastic engagement in the process, which led to enhanced community comprehension, new ideas about data use, and an array of applications to improve their clinical revenue. However, they also revealed barriers to further adoption, including time, expense, and technical expertise, which could limit the use of GIS and mapping unless economies of scale across clinics, the use of web technology, and the availability of dynamic mapping tools could be realized. Analytic mapping was enthusiastically received and practically applied in the primary care setting, and was readily comprehended by clinic leaders for innovative purposes. This is a tool of particular relevance amid primary care safety-net expansion and increased funding of health information technology diffusion in these

Application of geographic information systems to waste minimization efforts at Los Alamos National Laboratory

International Nuclear Information System (INIS)

Lyttle, T.W.; Smith, D.M.; Burns, M.; Weinrach, J.B.

1993-01-01

At Los Alamos National Laboratory (LANL), facility waste streams tend to be small but highly diverse. Initial characterization of such waste streams is often difficult in part due to a lack of tools to assist the generators themselves in completing such assessments. A methodology has been developed at LANL to allow process knowledgeable field personnel to develop baseline waste generation assessments and to evaluate potential waste minimization technology. This Process Waste Assessment (PWA) system is an application constructed within the Process Modeling System and currently being integrated with the InFoCAD Geographic Information System (GIS) . The Process Modeling System (PMS) is an object-oriented, mass balance-based, discrete-event simulation framework written using the Common Lisp Object System (CLOS) . Analytical capabilities supported within the PWA system include: complete mass balance specifications, historical characterization of selected waste streams and generation of facility profiles for materials consumption, resource utilization and worker exposure. Development activities include integration with the LANL facilities management Geographic Information System (GIS) and provisions for a Best Available Technologies (BAT) database. The environments used to develop these assessment tools will be discussed in addition to a review of initial implementation results

Dynamic management of geographic data in a virtual environment

NARCIS (Netherlands)

Jense, G.J.; Donkers, K.

1996-01-01

In order to achieve true 3D user interaction with geographic information, an interface between a virtual environment system and a geographic information system has been designed and implemented. This VE/GIS interface is based on a loose coupling of the underlying geographic database and the virtual

Multi criteria evaluation for universal soil loss equation based on geographic information system

Science.gov (United States)

Purwaamijaya, I. M.

2018-05-01

The purpose of this research were to produce(l) a conceptual, functional model designed and implementation for universal soil loss equation (usle), (2) standard operational procedure for multi criteria evaluation of universal soil loss equation (usle) using geographic information system, (3) overlay land cover, slope, soil and rain fall layers to gain universal soil loss equation (usle) using multi criteria evaluation, (4) thematic map of universal soil loss equation (usle) in watershed, (5) attribute table of universal soil loss equation (usle) in watershed. Descriptive and formal correlation methods are used for this research. Cikapundung Watershed, Bandung, West Java, Indonesia was study location. This research was conducted on January 2016 to May 2016. A spatial analysis is used to superimposed land cover, slope, soil and rain layers become universal soil loss equation (usle). Multi criteria evaluation for universal soil loss equation (usle) using geographic information system could be used for conservation program.

A geographic information system applied to a malaria field study in western Kenya.

Science.gov (United States)

Hightower, A W; Ombok, M; Otieno, R; Odhiambo, R; Oloo, A J; Lal, A A; Nahlen, B L; Hawley, W A

1998-03-01

This paper describes use of the global positioning system (GPS) in differential mode (DGPS) to obtain highly accurate longitudes, latitudes, and altitudes of 1,169 houses, 15 schools, 40 churches, four health care centers, 48 major mosquito breeding sites, 10 borehole wells, seven shopping areas, major roads, streams, the shore of Lake Victoria, and other geographic features of interest associated with a longitudinal study of malaria in 15 villages in western Kenya. The area mapped encompassed approximately 70 km2 and included 42.0 km of roads, 54.3 km of streams, and 15.0 km of lake shore. Location data were entered into a geographic information system for map production and linkage with various databases for spatial analyses. Spatial analyses using parasitologic and entomologic data are presented as examples. Background information on DGPS is presented along with estimates of effort and expense to produce the map information.

Coordination of the National Statistical System in the Information Security Context

Directory of Open Access Journals (Sweden)

O. H.

2017-12-01

Full Text Available The need for building the national statistical system (NSS as the framework for coordination of statistical works is substantiated. NSS is defined on the basis of system approach. It is emphasized that the essential conditions underlying NSS are strategic planning, reliance on internationally adopted methods and due consideration to country-specific environment. The role of the state coordination policy in organizing statistical activities in the NSS framework is highlighted, key objectives of the integrated national policy on coordination of statistical activities are given. Threats arising from non-existence of NSS in a country are shown: “irregular” pattern of statistical activities, resulting from absence of common legal, methodological and organizational grounds; high costs involved in the finished information product in parallel with its low quality; impossibility of administering the statistical information security in a coherent manner, i. e. keeping with the rules on confidentiality of data, preventing intentional distortion of information and keeping with the rules of treatment with data making the state secret. An extensive review of NSS functional objectives is made: to ensure the system development of the official statistics; to ensure confidentiality and protection of individual data; to establish interdepartmental mechanisms for control and protection of secret statistical information; to broaden and regulate the access to statistical data and their effective use. The need for creating the National Statistical Commission is grounded.

Felling-system and regeneration of pine forests on ecological-genetic-geographical basis

Directory of Open Access Journals (Sweden)

S. N. Sannikov

2015-12-01

Full Text Available A conception of the adaptation of Scots pine populations to the natural regeneration on open sites with the mosaic retained stand and mineralized soil surface on the basis of the ecological-genetic-geographical investigations in the forests of the Russia and the theory of petropsammofitness-pyrofitness (Sannikov S. N., 1983 has been substantiated. The methods of clear cuts with the seeding from surrounding forest, seed curtains and sufficiently extent of the substrate preparation for the pine selfsown have been selected and elaborated as a main organization principle of the system «felling-regeneration» in the plains pine forests of the forest zone. High regeneration efficiency of this system with the application of original aggregate for the optimal mineralization of the soil substrate (with its synchronous loosing has been shown on the example of dominating pine forest types in the subzone for-forest-steppe of the Western Siberia. The silvicultural-ecological and reproductive-genetic advantages of retaining seed curtains instead of separate seed trees have been substantiated. The basic parameters of the system «felling-regeneration», which guarantee a sufficient success of the following pine regeneration in the for-forest-steppe subzone, have been determined with the help of the methods of the mathematical imitation modeling of the pine selfsown density depending on the area and localization of seed curtains, surrounding forest and the extent of the substrate mineralization. The zonal differentiated system of the fellings and measures for the regeneration optimization in the climatically substituting pine forest types in the Western Siberia has been elaborated according to the parameters, studied earlier, on the ecological-genetic-geographical basis. The principles of this system in forest zone come to the clear strip-fellings with insemination of cuts from the seed curtains and forest walls, and to the hollow-fellings with the

Coordinated scheduling for dynamic real-time systems

Science.gov (United States)

Natarajan, Swaminathan; Zhao, Wei

1994-01-01

In this project, we addressed issues in coordinated scheduling for dynamic real-time systems. In particular, we concentrated on design and implementation of a new distributed real-time system called R-Shell. The design objective of R-Shell is to provide computing support for space programs that have large, complex, fault-tolerant distributed real-time applications. In R-shell, the approach is based on the concept of scheduling agents, which reside in the application run-time environment, and are customized to provide just those resource management functions which are needed by the specific application. With this approach, we avoid the need for a sophisticated OS which provides a variety of generalized functionality, while still not burdening application programmers with heavy responsibility for resource management. In this report, we discuss the R-Shell approach, summarize the achievement of the project, and describe a preliminary prototype of R-Shell system.

GeoTravel: Harvesting Ambient Geographic Footprints from GPS Trajectories

OpenAIRE

Liew, Li Ching; Goh, Ong Sing

2014-01-01

This study is about harvesting point of interest from GPS trajectories. Trajectories are the paths that moving objects move by follow through space in a function of time while GPS trajectories generally are point-sequences with geographic coordinates, time stamp, speed and heading. User can get information from GPS enable device. For example, user can acquire present location, search the information around them and design driving routes to a destination and thus design travel itineraries. By ...

Development of hardwood seed zones for Tennessee using a geographic information system

Science.gov (United States)

Post, L.S.; Schlarbaum, S.E.; Van Manen, F.; Cecich, R.A.; Saxton, A.M.; Schneider, J.F.

2003-01-01

For species that have no or limited information on genetic variation and adaptability to nonnative sites, there is a need for seed collection guidelines based on biological, climatological, and/or geographical criteria. Twenty-eight hardwood species are currently grown for reforestation purposes at the East Tennessee State Nursery. The majority of these species have had no genetic testing to define guidelines for seed collection location and can be distributed to sites that have a very different environment than that of seed origin(s). Poor survival and/or growth may result if seedlings are not adapted to environmental conditions at the planting location. To address this problem, 30 yr of Tennessee county precipitation and minimum temperature data were analyzed and grouped using a centroid hierarchical cluster analysis. The weather data and elevational data were entered into a Geographic Information System (GIS) and separately layered over Bailey's Ecoregions to develop a seed zone system for Tennessee. The seed zones can be used as a practical guideline for collecting seeds to ensure that the resulting seedlings will be adapted to planting environments.

Review and Evaluation of Hand–Arm Coordinate Systems for Measuring Vibration Exposure, Biodynamic Responses, and Hand Forces

Directory of Open Access Journals (Sweden)

Ren G. Dong

2015-09-01

Full Text Available The hand coordinate systems for measuring vibration exposures and biodynamic responses have been standardized, but they are not actually used in many studies. This contradicts the purpose of the standardization. The objectives of this study were to identify the major sources of this problem, and to help define or identify better coordinate systems for the standardization. This study systematically reviewed the principles and definition methods, and evaluated typical hand coordinate systems. This study confirms that, as accelerometers remain the major technology for vibration measurement, it is reasonable to standardize two types of coordinate systems: a tool-based basicentric (BC system and an anatomically based biodynamic (BD system. However, these coordinate systems are not well defined in the current standard. Definition of the standard BC system is confusing, and it can be interpreted differently; as a result, it has been inconsistently applied in various standards and studies. The standard hand BD system is defined using the orientation of the third metacarpal bone. It is neither convenient nor defined based on important biological or biodynamic features. This explains why it is rarely used in practice. To resolve these inconsistencies and deficiencies, we proposed a revised method for defining the realistic handle BC system and an alternative method for defining the hand BD system. A fingertip-based BD system for measuring the principal grip force is also proposed based on an important feature of the grip force confirmed in this study.

Review and Evaluation of Hand–Arm Coordinate Systems for Measuring Vibration Exposure, Biodynamic Responses, and Hand Forces

Science.gov (United States)

Dong, Ren G.; Sinsel, Erik W.; Welcome, Daniel E.; Warren, Christopher; Xu, Xueyan S.; McDowell, Thomas W.; Wu, John Z.

2015-01-01

The hand coordinate systems for measuring vibration exposures and biodynamic responses have been standardized, but they are not actually used in many studies. This contradicts the purpose of the standardization. The objectives of this study were to identify the major sources of this problem, and to help define or identify better coordinate systems for the standardization. This study systematically reviewed the principles and definition methods, and evaluated typical hand coordinate systems. This study confirms that, as accelerometers remain the major technology for vibration measurement, it is reasonable to standardize two types of coordinate systems: a tool-based basicentric (BC) system and an anatomically based biodynamic (BD) system. However, these coordinate systems are not well defined in the current standard. Definition of the standard BC system is confusing, and it can be interpreted differently; as a result, it has been inconsistently applied in various standards and studies. The standard hand BD system is defined using the orientation of the third metacarpal bone. It is neither convenient nor defined based on important biological or biodynamic features. This explains why it is rarely used in practice. To resolve these inconsistencies and deficiencies, we proposed a revised method for defining the realistic handle BC system and an alternative method for defining the hand BD system. A fingertip-based BD system for measuring the principal grip force is also proposed based on an important feature of the grip force confirmed in this study. PMID:26929824

Review and Evaluation of Hand-Arm Coordinate Systems for Measuring Vibration Exposure, Biodynamic Responses, and Hand Forces.

Science.gov (United States)

Dong, Ren G; Sinsel, Erik W; Welcome, Daniel E; Warren, Christopher; Xu, Xueyan S; McDowell, Thomas W; Wu, John Z

2015-09-01

The hand coordinate systems for measuring vibration exposures and biodynamic responses have been standardized, but they are not actually used in many studies. This contradicts the purpose of the standardization. The objectives of this study were to identify the major sources of this problem, and to help define or identify better coordinate systems for the standardization. This study systematically reviewed the principles and definition methods, and evaluated typical hand coordinate systems. This study confirms that, as accelerometers remain the major technology for vibration measurement, it is reasonable to standardize two types of coordinate systems: a tool-based basicentric (BC) system and an anatomically based biodynamic (BD) system. However, these coordinate systems are not well defined in the current standard. Definition of the standard BC system is confusing, and it can be interpreted differently; as a result, it has been inconsistently applied in various standards and studies. The standard hand BD system is defined using the orientation of the third metacarpal bone. It is neither convenient nor defined based on important biological or biodynamic features. This explains why it is rarely used in practice. To resolve these inconsistencies and deficiencies, we proposed a revised method for defining the realistic handle BC system and an alternative method for defining the hand BD system. A fingertip-based BD system for measuring the principal grip force is also proposed based on an important feature of the grip force confirmed in this study.

On the interpretations of Langevin stochastic equation in different coordinate systems

International Nuclear Information System (INIS)

Martinez, E.; Lopez-Diaz, L.; Torres, L.; Alejos, O.

2004-01-01

The stochastic Langevin Landau-Lifshitz equation is usually utilized in micromagnetics formalism to account for thermal effects. Commonly, two different interpretations of the stochastic integrals can be made: Ito and Stratonovich. In this work, the Langevin-Landau-Lifshitz (LLL) equation is written in both Cartesian and Spherical coordinates. If Spherical coordinates are employed, the noise is additive, and therefore, Ito and Stratonovich solutions are equal. This is not the case when (LLL) equation is written in Cartesian coordinates. In this case, the Langevin equation must be interpreted in the Stratonovich sense in order to reproduce correct statistical results. Nevertheless, the statistics of the numerical results obtained from Euler-Ito and Euler-Stratonovich schemes are equivalent due to the additional numerical constraint imposed in Cartesian system after each time step, which itself assures that the magnitude of the magnetization is preserved

Transportation network development in a liberalized power system, a coordination problem with production

International Nuclear Information System (INIS)

Rious, V.

2007-10-01

This thesis analyses how the long term coordination between generation and transmission is organised in a liberalized power system. It relies on a modular analysis framework that allows us to separate the coordination mechanisms into distinct modules. The governance structure of the power network completes this analysis framework. In a rationale of institutional complementarity, this governance structure impacts the way the TSOs effectively implement the power flow management. The proactive behaviour of the TSO for the coordination of generation and transmission can be explained in two ways. Firstly, the network investment can be the only effective process of long term coordination between generation and transmission. Secondly, when forecasting network investment, the TSO can prepare the accommodation of the fast-built generation units and detect the potential failures of locational incentive signals. (author)

Geographic information system (GIS) representation of coal-bearing areas in India and Bangladesh

Science.gov (United States)

Trippi, Michael H.; Tewalt, Susan J.

2011-01-01

Geographic information system (GIS) information may facilitate energy studies, which in turn provide input for energy policy decisions. Prior to this study, no GIS file representing the occurrence of coal-bearing units in India or Bangladesh was known to exist. This Open-File Report contains downloadable shapefiles representing the coalfields of India and Bangladesh and a limited number of chemical and petrographic analyses of India and Bangladesh coal samples. Also included are maps of India and Bangladesh showing the locations of the coalfields and coal samples in the shapefiles, figures summarizing the stratigraphic units in the coalfields of India and Bangladesh, and a brief report summarizing the stratigraphy and geographic locations of coal-bearing deposits in India and Bangladesh.

Geographic information systems, remote sensing, and spatial analysis activities in Texas, 2002-07

Science.gov (United States)

Pearson, D.K.; Gary, R.H.; Wilson, Z.D.

2007-01-01

Geographic information system (GIS) technology has become an important tool for scientific investigation, resource management, and environmental planning. A GIS is a computer-aided system capable of collecting, storing, analyzing, and displaying spatially referenced digital data. GIS technology is particularly useful when analyzing a wide variety of spatial data such as with remote sensing and spatial analysis. Remote sensing involves collecting remotely sensed data, such as satellite imagery, aerial photography, or radar images, and analyzing the data to gather information or investigate trends about the environment or the Earth's surface. Spatial analysis combines remotely sensed, thematic, statistical, quantitative, and geographical data through overlay, modeling, and other analytical techniques to investigate specific research questions. It is the combination of data formats and analysis techniques that has made GIS an essential tool in scientific investigations. This document presents information about the technical capabilities and project activities of the U.S. Geological Survey (USGS) Texas Water Science Center (TWSC) GIS Workgroup from 2002 through 2007.

Utilizing Geographic Information Systems (GIS) to analyze geographic and demographic patterns related to forensic case recovery locations in Florida.

Science.gov (United States)

Kolpan, Katharine E; Warren, Michael

2017-12-01

This paper highlights how Geographic Information Systems (GIS) can be utilized to analyze biases and patterns related to physical and cultural geography in Florida. Using case recovery locations from the C. Addison Pound Human Identification Laboratory (CAPHIL), results indicate that the majority of CAPHIL cases are recovered from urban areas with medium to low population density and low rates of crime. The results also suggest that more accurate record keeping methods would enhance the data. Copyright © 2017 Elsevier B.V. All rights reserved.

Columbia River system operation review: Final environmental impact statement. Appendix R, Pacific Northwest Coordination agreement (PNCA)

International Nuclear Information System (INIS)

1995-11-01

Currently, the Federal government coordinates the planning and operation of the Federal Columbia River Power System (FCRPS) with projects owned and operated by the region's non-Federal hydrogenerating utilities pursuant to the Pacific North-west Coordination Agreement (PNCA). The Bureau of Reclamation (Reclamation), the Corps of Engineers (Corps), and the Bonneville Power Administration (BPA) are parties to the PNCA on behalf of the government of the United States. The PNCA is a complex agreement that provides an opportunity for the region's power producers to maximize the power system's reliability and economy while meeting their multiple-use objectives. The PNCA does not dictate the operation of the resources it coordinates. It is essentially an accounting mechanism that exchanges the power produced among the parties in order to improve the reliability of the system and reduce regional power costs. Project owners retain complete autonomy to operate as needed to meet their multiple-use requirements. The PNCA was executed in 1964 as an important component of regional plans to maximize the Northwest's hydro resource capability. Maximization also included the development of storage projects on the Columbia River in Canada pursuant to the terms of the 1964 Columbia River Treaty. Because of the link between power coordination and Treaty issues, the current parties to the PNCA, currently are contemplating entering into a replacement or renewed power coordination agreement. Because the power coordination agreement is a consensual arrangement, its ultimate provisions must be acceptable to all of its signatories. This Appendix R to the Final Environmental Impact Statement of the Columbia River System is a presentation of the Pacific North-west Coordination Agreement

Transportation network development in a liberalized power system, a coordination problem with production; Le developpement du reseau de transport dans un systeme electrique liberalise, un probleme de coordination avec la production

Energy Technology Data Exchange (ETDEWEB)

Rious, V

2007-10-15

This thesis analyses how the long term coordination between generation and transmission is organised in a liberalized power system. It relies on a modular analysis framework that allows us to separate the coordination mechanisms into distinct modules. The governance structure of the power network completes this analysis framework. In a rationale of institutional complementarity, this governance structure impacts the way the TSOs effectively implement the power flow management. The proactive behaviour of the TSO for the coordination of generation and transmission can be explained in two ways. Firstly, the network investment can be the only effective process of long term coordination between generation and transmission. Secondly, when forecasting network investment, the TSO can prepare the accommodation of the fast-built generation units and detect the potential failures of locational incentive signals. (author)

Transportation Routing Analysis Geographic Information System (TRAGIS) User's Manual

Energy Technology Data Exchange (ETDEWEB)

Johnson, PE

2003-09-18

The Transportation Routing Analysis Geographic Information System (TRAGIS) model is used to calculate highway, rail, or waterway routes within the United States. TRAGIS is a client-server application with the user interface and map data files residing on the user's personal computer and the routing engine and network data files on a network server. The user's manual provides documentation on installation and the use of the many features of the model.

A practical approach for active camera coordination based on a fusion-driven multi-agent system

Science.gov (United States)

Bustamante, Alvaro Luis; Molina, José M.; Patricio, Miguel A.

2014-04-01

In this paper, we propose a multi-agent system architecture to manage spatially distributed active (or pan-tilt-zoom) cameras. Traditional video surveillance algorithms are of no use for active cameras, and we have to look at different approaches. Such multi-sensor surveillance systems have to be designed to solve two related problems: data fusion and coordinated sensor-task management. Generally, architectures proposed for the coordinated operation of multiple cameras are based on the centralisation of management decisions at the fusion centre. However, the existence of intelligent sensors capable of decision making brings with it the possibility of conceiving alternative decentralised architectures. This problem is approached by means of a MAS, integrating data fusion as an integral part of the architecture for distributed coordination purposes. This paper presents the MAS architecture and system agents.

Coordinated Transmissions to Direct and Relayed Users in Wireless Cellular Systems

DEFF Research Database (Denmark)

Thai, Chan; Popovski, Petar; Kaneko, Megumi

2011-01-01

The ideas of wireless network coding at the physical layer promise high throughput gains in wireless systems with relays and multi–way traffic flows. This gain can be ascribed to two principles: (1) joint transmission of multiple communication flows and (2) usage of a priori information to cancel...... the interference. In this paper we use these principles to devise new transmission schemes in wireless cellular systems that feature both users served directly by the base stations (direct users) and users served through relays (relayed users). We present four different schemes for coordinated transmission...... of uplink and downlink traffic in which one direct and one relayed user are served. These schemes are then used as building blocks in multi–user scenarios, where we present several schemes for scheduling pairs of users for coordinated transmissions. The optimal scheme involves exhaustive search of the best...

Geographic Information System (GIS) characterizations of benthic habitats near South Florida coast (NODC Accession 0000600)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data collection uses a Geographic Information System (GIS) to organize and characterize information about benthic communities and substrates, which are...

Standalone Mobile Application for Shipping Services Based on Geographic Information System and A-Star Algorithm

Science.gov (United States)

Gunawan, D.; Marzuki, I.; Candra, A.

2018-03-01

Geographic Information Systems (GIS) plays an essential role in shipping service related application. By utilizing GIS, the courier can find the route to deliver goods for its customer. This research proposes a standalone mobile application to provide the shortest route to the destinations by utilizing geographic information systems with A-Star algorithm. This application is intended to be used although the area has no Internet network available. The developed application can handle several drop off points then calculates the shortest route that passes through all the drop off points. According to the conducted testing, the number of drop off points that can be calculated is influenced by the specification of the smartphone. More destinations require more smartphone resources and time to process.

Relay protection coordination with generator capability curve, excitation system limiters and power system relay protections settings

Directory of Open Access Journals (Sweden)

Buha Danilo

2016-01-01

Full Text Available The relay protection settings performed in the largest thermal powerplant (TE "Nikola Tesla B" are reffered and explained in this paper. The first calculation step is related to the coordination of the maximum stator current limiter settings, the overcurrent protection with inverse characteristics settings and the permitted overload of the generator stator B1. In the second calculation step the settings of impedance generator protection are determined, and the methods and criteria according to which the calculations are done are described. Criteria used to provide the protection to fulfill the backup protection role in the event of malfunction of the main protection of the transmission system. are clarified. The calculation of all protection functions (32 functions of generator B1 were performed in the project "Coordination of relay protection blocks B1 and B2 with the system of excitation and power system protections -TENT B".

Multi-agent System for Off-line Coordinated Motion Planning of Multiple Industrial Robots

Directory of Open Access Journals (Sweden)

Shital S. Chiddarwar

2011-03-01

Full Text Available This article presents an agent based framework for coordinated motion planning of multiple robots. The emerging paradigm of agent based systems is implemented to address various issues related to safe and fast task execution when multiple robots share a common workspace. In the proposed agent based framework, each issue vital for coordinated motion planning of multiple robots and every robot participating in coordinated task is considered as an agent. The identified agents are interfaced with each other in order to incorporate the desired flexibility in the developed framework. This framework gives a complete strategy for determination of optimal trajectories of robots working in coordination with due consideration to their kinematic, dynamic and payload constraint. The complete architecture of the proposed framework and the detailed discussion on various modules are covered in this paper.

Analysis Of Educational Services Distribution-Based Geographic Information System GIS

Directory of Open Access Journals (Sweden)

Waleed Lagrab

2015-03-01

Full Text Available Abstract This study analyzes the spatial distribution of kindergarten facilities in the study area based on the Geographic Information Systems GIS in order to test an efficiency of GIS technology to redistribute the existing kindergarten and choose the best location in the future and applying the standard criteria for selecting the suitable locations for kindergarten. To achieve this goal the data and information are collected via interviews and comprehensive statistics on the education facilities in Mukalla districts in YEMEN which contributed to building a geographic database for the study area. After that the Kindergarten spatial patterns are analyzed in terms of proximity to each other and used near some other land in the surrounding area such as streets highways factories etc. Also measures the concentration dispersion clustering and distribution direction for the kindergarten this study showed the effectiveness of the GIS for spatial data analysis. One of the most important finding that most of the Kindergarten was established in Mukalla city did not take into account the criteria that set by the authorities. Furthermore almost district suffers from a shortage in the number of kindergarten and pattern of distribution of those kindergartens dominated by spatial dispersed.

Coordinated Control of Multi-Agent Systems in Rapidly Varying Environments, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — In this STTR project Scientific Systems Company, Inc. (SSCI) and Brigham Young University (BYU) propose to design, implement, and test an Autonomous Coordinated...

The insulation coordination and surge arrester design for HTS cable system in Icheon substation

Energy Technology Data Exchange (ETDEWEB)

Lee, Hansang, E-mail: Hansang80@korea.ac.kr [School of Railway and Electrical Engineering, Kyungil University, Hayang-eup, Gyeongsan-si, Gyeongsangbuk-do 712-701 (Korea, Republic of); Yoon, Dong-Hee [Department of New and Renewable Energy, Kyungil University, Hayang-eup, Gyeongsan-si, Gyeongsangbuk-do 712-701 (Korea, Republic of); Lee, Seung-Ryul [Korea Electrotechnology Research Institute, Naeson-dong, Uiwang-si, Gyeonggi-do 437-080 (Korea, Republic of); Yang, Byeong-Mo [Korea Electric Power Research Institute, Munji-dong, Yuseong-gu, Daejeon 305-760 (Korea, Republic of); Jang, Gilsoo, E-mail: gjang@korea.ac.kr [School of Electrical Engineering, Korea University, Anam-dong 5-ga, Seongbuk-gu, Seoul 136-713 (Korea, Republic of)

2013-01-15

Highlights: ► It is necessary to study lightning response of the HTS cable. ► The analytic model has been developed for the HTS cable in the Icheon substation. ► Well-designed surge arrester has been verified through PSCAD/EMTDC simulations. -- Abstract: This paper proposes an insulation coordination and surge arrester design for HTS (High-Temperature Superconducting) cable system in Icheon substation in Korea. In the aspect of the economic analysis, since the HTS cable is very expensive, the insulation coordination to prevent the dielectric breakdown caused by the lightning surge should be considered carefully. Also, in the aspect of the power system reliability, since the HTS cable has much more capacity compared than conventional power cables and the ripple effect from the HTS cable failure may lead to the wide area blackout, an intensive study for insulation coordination from lightning surge is one of the most important considerations. In this paper, the insulation coordination for lightning surge is verified using HTS cable and power equipment models and the design of the proper surge arrester is proposed.

Multi-Mission Geographic Information System for Science Operations: A Test Case Using MSL Data

Science.gov (United States)

Calef, F. J.; Abarca, H. E.; Soliman, T.; Abercrombie, S. P.; Powell, M. W.

2017-06-01

The Multi-Mission Geographic Information System (MMGIS) is a NASA AMMOS project in its second year of development, built to display and query science products in a spatial context. We present our progress building this tool using MSL in situ data.

Multiagent System-Based Distributed Coordinated Control for Radial DC Microgrid Considering Transmission Time Delays

DEFF Research Database (Denmark)

Dou, Chun-Xia; Yue, Dong; Guerrero, Josep M.

2017-01-01

This paper focuses on a multi-agent based distributed coordinated control for radial DC microgrid considering trans-mission time delays. Firstly, a two-level multi-agent system is constructed, where local control is formulated based on local states and executed by means of the first-level agent......, and dis-tributed coordinated control law is formulated based on wide-area information and executed by means of the secondary- level agent in order to improve the voltage control performances. Afterwards, the research mainly focuses on designing the local controller and the distributed coordinated...

The National Geographic Names Data Base: Phase II instructions

Science.gov (United States)

Orth, Donald J.; Payne, Roger L.

1987-01-01

The Geographic Names Information System is a computer-based information system developed to meet major national needs by providing information for named entities in the United States, its territories, and outlying areas. The National Geographic Names Data Base, a component of the Geographic Names Information System, currently contains most names and associated information recorded on the 1:24,000-scale (or largest scale available) topographic maps of the U.S. Geological Survey. The work involved in this initial compilation of names shown on the topographic-map series, and the development and editing of the National Geographic Names Data Base, is referred to as Phase I. Optimal use and effectiveness of an automated names system require that the names of features

Energetic planning in isolated Amazonian communities using geographical information system; Planejamento energetico em regioes isoladas da Amazonia utilizando sistemas de informacoes geograficas

Energy Technology Data Exchange (ETDEWEB)

Almeida, Arthur [Universidade Federal do Para (UFPA), Belem, PA (Brazil). Programa de Pos-Graduacao de Engenharia Eletrica; Rocha, Brigida R.P.; Monteiro, Jose H.A.; Gaspar, Gabriella C.M. [Universidade Federal do Para (UFPA), Belem, PA (Brazil). Dept. de Engenharia Eletrica e de Computacao; Aarao Junior, Raimundo N.N. [Universidade Federal do Para (UFPA), Belem, PA (Brazil). Dept. de Engenharia Mecanica

2004-07-01

This paper proposes a system of electric planning in isolated Amazonian communities. For those communities, we propose the use of decentralized systems of electric energy with biomass as fuel. We also propose a computer system of electric planning with geographical information systems for its facilities of integrating geographical information, so useful in an Amazonian context. (author)

The application of geographic information system to radiological and nuclear emergency monitoring

International Nuclear Information System (INIS)

Sadaniowski, I.V.; Rodriguez, M.; Rojas, C.A.; Jordan, O.D.

2010-01-01

The Geographic Information System (GIS) implementation for the preparation and response in case of to radiological and nuclear emergencies is being developed in the Emergency Control Center of the Argentina Nuclear Regulatory Authority, since many years ago. Additionals features have been incorporated such as integration with the results of radiological monitoring, improving and expanding its benefits both in the preparation stage and during the work of emergency response. This paper shows the specific application of GIS to radiological monitoring in case of emergency situations such as during the search of orphan sources and the characterization of geographic context around nuclear power plants and atomic centers. The GIS provides essential data cartographic for the monitoring with sophisticated detectors, to integrate with the information received with infrastructure, urban and rural population maps, physical features of the place, satellite images, etc. The monitoring results are analyzed and compared with relevant information for decision making during the response, like evacuation routes, affected population, security forces in the area, radiological characterization, application of protective actions, hospitals, schools, etc. These two integrated tools improve preparedness and response system in case of radiological or nuclear emergency. (authors) [es

Geographical representation of the European populations with a view to the assessment of collective doses

International Nuclear Information System (INIS)

Garnier, A.; Sauve, A.; Madelmont, C.

1980-01-01

Demographical data are very important in assessing health consequences of the siting of nuclear plants. In addition to a detailed description of the distribution of population living in the neighbourhood of every site, a less definite representation of the population as a whole is needed to assess the consequences of the long-range transport of pollutants within or outside the national boundaries, in order to determine the collective doses according to the concepts of the ICRP recommendations. For this purpose, the census data of the nine countries of the European Community have been collected. They are presented in two forms: either by communes or following a more or less close-meshed grid. The points have been defined by their geographical coordinates. After merging the informations, the demographic data were classified according to the geographical coordinates. One of them is a distribution programme of the population in the meshes of an European grid, some examples of which are shown. (H.K.)

Open-Source web-based geographical information system for health exposure assessment

Directory of Open Access Journals (Sweden)

Evans Barry

2012-01-01

Full Text Available Abstract This paper presents the design and development of an open source web-based Geographical Information System allowing users to visualise, customise and interact with spatial data within their web browser. The developed application shows that by using solely Open Source software it was possible to develop a customisable web based GIS application that provides functions necessary to convey health and environmental data to experts and non-experts alike without the requirement of proprietary software.

Open-Source web-based geographical information system for health exposure assessment

DEFF Research Database (Denmark)

Evans, Barry; Sabel, Clive E

2012-01-01

This paper presents the design and development of an open source web-based Geographical Information System allowing users to visualise, customise and interact with spatial data within their web browser. The developed application shows that by using solely Open Source software it was possible to d...... to develop a customisable web based GIS application that provides functions necessary to convey health and environmental data to experts and non-experts alike without the requirement of proprietary software....

Network Performance and Coordination in the Health, Education, Telecommunications System. Satellite Technology Demonstration, Technical Report No. 0422.

Science.gov (United States)

Braunstein, Jean; Janky, James M.

This paper describes the network coordination for the Health, Education, Telecommunications (HET) system. Specifically, it discusses HET network performance as a function of a specially-developed coordination system which was designed to link terrestrial equipment to satellite operations centers. Because all procedures and equipment developed for…

Geographic information system for Long Island: An epidemiologic systems approach to identify environmental breast cancer risks on Long Island. Phase 1

Energy Technology Data Exchange (ETDEWEB)

Barancik, J.I.; Kramer, C.F.; Thode, H.C. Jr.

1995-12-01

BNL is developing and implementing the project ``Geographic Information System (GIS) for Long Island`` to address the potential relationship of environmental and occupational exposures to breast cancer etiology on Long Island. The project is divided into two major phases: The four month-feasibility project (Phase 1), and the major development and implementation project (Phase 2). This report summarizes the work completed in the four month Phase 1 Project, ``Feasibility of a Geographic Information System for Long Island.`` It provides the baseline information needed to further define and prioritize the scope of work for subsequent tasks. Phase 2 will build upon this foundation to develop an operational GIS for the Long Island Breast Cancer Study Project (LIBCSP).

Geographic information system for Long Island: An epidemiologic systems approach to identify environmental breast cancer risks on Long Island. Phase 1

International Nuclear Information System (INIS)

Barancik, J.I.; Kramer, C.F.; Thode, H.C. Jr.

1995-01-01

BNL is developing and implementing the project ''Geographic Information System (GIS) for Long Island'' to address the potential relationship of environmental and occupational exposures to breast cancer etiology on Long Island. The project is divided into two major phases: The four month-feasibility project (Phase 1), and the major development and implementation project (Phase 2). This report summarizes the work completed in the four month Phase 1 Project, ''Feasibility of a Geographic Information System for Long Island.'' It provides the baseline information needed to further define and prioritize the scope of work for subsequent tasks. Phase 2 will build upon this foundation to develop an operational GIS for the Long Island Breast Cancer Study Project (LIBCSP)

Emission and null coordinates: geometrical properties and physical construction

International Nuclear Information System (INIS)

Coll, Bartolome; Ferrando, Joan J; Morales-Lladosa, Juan A

2011-01-01

A Relativistic Positioning System is defined by four clocks (emitters) broadcasting their proper time. Then, every event reached by the signals is naturally labeled by these four times which are the emission coordinates of this event. The coordinate hypersurfaces of the emission coordinates are the future light cones based on the emitter trajectories. For this reason the emission coordinates have been also named null coordinates or light coordinates. Nevertheless, other coordinate systems used in different relativistic contexts have the own right to be named null or light coordinates. Here we analyze when one can say that a coordinate is a null coordinate and when one can say that a coordinate system is null. Moreover, we examine the physical construction and the geometrical properties of several n ull coordinate systems : the emission and the reception coordinates, the radar coordinates, and the Bondi-Sachs coordinates, among others.

Application of remote sensing and Geographic Information Systems to ecosystem-based urban natural resource management

Science.gov (United States)

Xiaohui Zhang; George Ball; Eve Halper

2000-01-01

This paper presents an integrated system to support urban natural resource management. With the application of remote sensing (RS) and geographic information systems (GIS), the paper emphasizes the methodology of integrating information technology and a scientific basis to support ecosystem-based management. First, a systematic integration framework is developed and...

Student Perspectives on the Teaching of Geographical Information Systems (GIS) in Geography Degrees

Science.gov (United States)

Seremet, Mehmet; Chalkley, Brian

2015-01-01

In an era when graduate employability is a key concern, the teaching of geographical information systems (GIS) has become a subject of considerable interest. This paper reports on a study of the GIS student learning experience using student survey data from six UK geography undergraduate programmes. The findings show that although students'…

DREAM : An ICT architecture framework for heterarchical coordination in power systems

NARCIS (Netherlands)

Kamphuis, I.G.; Wijbenga, J.P.; Veen, J.S. van der; Macdougall, P.; Faeth, M.

2015-01-01

Agent based techniques are used to coordinate demand and supply for increasing the embedding capacity of dispersed, badly predictable, renewable energy based power systems. VPPs (Virtual Power Plants) using this technology have demonstrated their feasibility in field tests and currently are scaled

Columbia River Coordinated Information System (CIS); Information Needs, 1992 Technical Report.

Energy Technology Data Exchange (ETDEWEB)

Petrosky, Charlie (Idaho Department of Fish and Game, Boise, ID); Kinney, William J. (Washington Department of Fishereis, Olympia, WA); Rowe, Mike (Shoshone-Bannock Tribes, Fort Hall, ID)

1993-05-01

Successful application of adaptive management to rebuilding the Columbia Basin`s anadromous fish resources requires that available information and experience be organized and shared between numerous organizations and individuals. Much of this knowledge exists only in unpublished form in agency and individual files. Even that information which is published in the form of technical and contract reports receives only limited distribution and is often out of print and unavailable after a few years. Only a small fraction of the basin`s collective knowledge is captured in permanent and readily available databases and recognized journals. State, tribal, and federal fishery managers have recognize these information management problems and have committed to a program, the Coordinated Information System Project, to capture and share more easily the core data and other information upon which management decisions are based. That project is now completing the process of scoping and identification of information needs. Construction of prototype systems will begin in 1992. This report is one in a series of seven describing the results of the Coordinated Information on System scoping and needs identification phase.

Nation-wide, web-based, geographic information system for the integrated surveillance and control of dengue fever in Mexico.

Science.gov (United States)

Hernández-Ávila, Juan Eugenio; Rodríguez, Mario-Henry; Santos-Luna, René; Sánchez-Castañeda, Veronica; Román-Pérez, Susana; Ríos-Salgado, Víctor Hugo; Salas-Sarmiento, Jesús Alberto

2013-01-01

Dengue fever incidence and its geographical distribution are increasing throughout the world. Quality and timely information is essential for its prevention and control. A web based, geographically enabled, dengue integral surveillance system (Dengue-GIS) was developed for the nation-wide collection, integration, analysis and reporting of geo-referenced epidemiologic, entomologic, and control interventions data. Consensus in the design and practical operation of the system was a key factor for its acceptance. Working with information systems already implemented as a starting point facilitated its acceptance by officials and operative personnel. Dengue-GIS provides the geographical detail needed to plan, asses and evaluate the impact of control activities. The system is beginning to be adopted as a knowledge base by vector control programs. It is used to generate evidence on impact and cost-effectiveness of control activities, promoting the use of information for decision making at all levels of the vector control program. Dengue-GIS has also been used as a hypothesis generator for the academic community. This GIS-based model system for dengue surveillance and the experience gathered during its development and implementation could be useful in other dengue endemic countries and extended to other infectious or chronic diseases.

Optimised operation and management of natural gas distribution systems with the geographic information system GIS; Gasnetze besser verwalten und optimieren mit GIS

Energy Technology Data Exchange (ETDEWEB)

Niehoerster, K.

2001-02-01

The geographic information system of the natural gas utility Ruhrgas AG is explained. It consists of a great variety of products for acquisition, up-dating and visualization of geographic data, as well as specific software solutions for customized applications. (orig./CB) [German] Das geographische Informationssystem der Ruhrgas AG wird ausfuehrlich beschrieben. Es besteht aus einer Vielzahl von Produkten zur Erfassung, Pflege und Visualisierung von geografischen Daten, sowie aus spezifischen Softwareloesungen fuer Kundenanwendungen. (orig./CB)

Coordinate asymptotics of the (3→3) wave functions for a three charged particle system

International Nuclear Information System (INIS)

Merkur'ev, S.P.

1977-01-01

Coordinate asymptotics of the (3 → 3) wave functions for three particles system with Coulomb interaction in the scattering problem is plotted. (3 → 3) and (3 → 2) process cases are considered, when the particles are not connected at the initial state. For coordinate asymptotics plotting the basis functions are used which meet Schroedinger equation in the eikonal approximation. The wave functions coordinate asymptotics plotting method is described far from special directions. Wave function asymptotical form is studied in the range of special directions and (3 → 3) scattering amplitude singularities are described. All data are given in accordance with the system with 2 charged particles only. The model in question is of special interest because of the described ppn system the studying of which is of great importance in nuclear physics. Final formulae are discussed for the most general case of three charged particles. Boundary problems for Schroedinger equation are shown to give the only way of definition for the (3 → 3) wave functions. It is pointed out that in special directions wave function coordinate asymptotics is presented with accuracy that gives the possibility to set such a boundary problem

Composing Models of Geographic Physical Processes

Science.gov (United States)

Hofer, Barbara; Frank, Andrew U.

Processes are central for geographic information science; yet geographic information systems (GIS) lack capabilities to represent process related information. A prerequisite to including processes in GIS software is a general method to describe geographic processes independently of application disciplines. This paper presents such a method, namely a process description language. The vocabulary of the process description language is derived formally from mathematical models. Physical processes in geography can be described in two equivalent languages: partial differential equations or partial difference equations, where the latter can be shown graphically and used as a method for application specialists to enter their process models. The vocabulary of the process description language comprises components for describing the general behavior of prototypical geographic physical processes. These process components can be composed by basic models of geographic physical processes, which is shown by means of an example.

The inertia system coordinate transformation based on the Lobachevsky function

International Nuclear Information System (INIS)

Fadeev, N.G.

2001-01-01

Based on the interpretation of the Lobachevsky function cosΠ(ρ/k) = thρ/k as the function which expresses the constant light velocity principle at k = c (k is the Lobachevsky constant, c is the light velocity), the inertia system coordinate transformation of two kinds (one of them known as Lorentz transformation) have been obtained

Improved Power System Stability Using Backtracking Search Algorithm for Coordination Design of PSS and TCSC Damping Controller.

Science.gov (United States)

Niamul Islam, Naz; Hannan, M A; Mohamed, Azah; Shareef, Hussain

2016-01-01

Power system oscillation is a serious threat to the stability of multimachine power systems. The coordinated control of power system stabilizers (PSS) and thyristor-controlled series compensation (TCSC) damping controllers is a commonly used technique to provide the required damping over different modes of growing oscillations. However, their coordinated design is a complex multimodal optimization problem that is very hard to solve using traditional tuning techniques. In addition, several limitations of traditionally used techniques prevent the optimum design of coordinated controllers. In this paper, an alternate technique for robust damping over oscillation is presented using backtracking search algorithm (BSA). A 5-area 16-machine benchmark power system is considered to evaluate the design efficiency. The complete design process is conducted in a linear time-invariant (LTI) model of a power system. It includes the design formulation into a multi-objective function from the system eigenvalues. Later on, nonlinear time-domain simulations are used to compare the damping performances for different local and inter-area modes of power system oscillations. The performance of the BSA technique is compared against that of the popular particle swarm optimization (PSO) for coordinated design efficiency. Damping performances using different design techniques are compared in term of settling time and overshoot of oscillations. The results obtained verify that the BSA-based design improves the system stability significantly. The stability of the multimachine power system is improved by up to 74.47% and 79.93% for an inter-area mode and a local mode of oscillation, respectively. Thus, the proposed technique for coordinated design has great potential to improve power system stability and to maintain its secure operation.

Improved Power System Stability Using Backtracking Search Algorithm for Coordination Design of PSS and TCSC Damping Controller.

Directory of Open Access Journals (Sweden)

Naz Niamul Islam

Full Text Available Power system oscillation is a serious threat to the stability of multimachine power systems. The coordinated control of power system stabilizers (PSS and thyristor-controlled series compensation (TCSC damping controllers is a commonly used technique to provide the required damping over different modes of growing oscillations. However, their coordinated design is a complex multimodal optimization problem that is very hard to solve using traditional tuning techniques. In addition, several limitations of traditionally used techniques prevent the optimum design of coordinated controllers. In this paper, an alternate technique for robust damping over oscillation is presented using backtracking search algorithm (BSA. A 5-area 16-machine benchmark power system is considered to evaluate the design efficiency. The complete design process is conducted in a linear time-invariant (LTI model of a power system. It includes the design formulation into a multi-objective function from the system eigenvalues. Later on, nonlinear time-domain simulations are used to compare the damping performances for different local and inter-area modes of power system oscillations. The performance of the BSA technique is compared against that of the popular particle swarm optimization (PSO for coordinated design efficiency. Damping performances using different design techniques are compared in term of settling time and overshoot of oscillations. The results obtained verify that the BSA-based design improves the system stability significantly. The stability of the multimachine power system is improved by up to 74.47% and 79.93% for an inter-area mode and a local mode of oscillation, respectively. Thus, the proposed technique for coordinated design has great potential to improve power system stability and to maintain its secure operation.

Three-dimensional coordinate system used at CERN

International Nuclear Information System (INIS)

Gervaise, J.; Mayoud, M.; Menant, E.

1983-11-01

This report is a detailed account of the transformations and corrections that must be applied to any geodetic quantity - whether directly observed or derived - before it can be introduced into calculations relating to the reference system of coordinates used at CERN. In particular, a type of projection, called orthographic projection, has been developed to be as well adapted as possible to the geodetic network of the Subterranean Proton Synchrotron (SPS), while preserving the basic possibilities of the other installations - i.e., the Proton Synchrotron (PS) and the Intersecting Storage Rings (ISR). The system in which the particle beam geometry is defined is necessarily cartesian. This feature, though mathematically simple, nevertheless has numerous consequences for the treatment of measurements that are physically connected to the shape of the earth. The calculations of the orthographic projection, the planimetry and the altimetry are presented in detail. 12 figures

Microgrids and distributed generation systems: Control, operation, coordination and planning

Science.gov (United States)

Che, Liang

Distributed Energy Resources (DERs) which include distributed generations (DGs), distributed energy storage systems, and adjustable loads are key components in microgrid operations. A microgrid is a small electric power system integrated with on-site DERs to serve all or some portion of the local load and connected to the utility grid through the point of common coupling (PCC). Microgrids can operate in both grid-connected mode and island mode. The structure and components of hierarchical control for a microgrid at Illinois Institute of Technology (IIT) are discussed and analyzed. Case studies would address the reliable and economic operation of IIT microgrid. The simulation results of IIT microgrid operation demonstrate that the hierarchical control and the coordination strategy of distributed energy resources (DERs) is an effective way of optimizing the economic operation and the reliability of microgrids. The benefits and challenges of DC microgrids are addressed with a DC model for the IIT microgrid. We presented the hierarchical control strategy including the primary, secondary, and tertiary controls for economic operation and the resilience of a DC microgrid. The simulation results verify that the proposed coordinated strategy is an effective way of ensuring the resilient response of DC microgrids to emergencies and optimizing their economic operation at steady state. The concept and prototype of a community microgrid that interconnecting multiple microgrids in a community are proposed. Two works are conducted. For the coordination, novel three-level hierarchical coordination strategy to coordinate the optimal power exchanges among neighboring microgrids is proposed. For the planning, a multi-microgrid interconnection planning framework using probabilistic minimal cut-set (MCS) based iterative methodology is proposed for enhancing the economic, resilience, and reliability signals in multi-microgrid operations. The implementation of high-reliability microgrids

Coordinated setting of stabilizers for synchronous generators and static var compensators in multimachine systems

Energy Technology Data Exchange (ETDEWEB)

Simoes Costa, A J.A.; Silva, A S; Freitas, F D [Santa Catarina Univ., Florianopolis, SC (Brazil). Dept. de Engenharia Eletrica

1994-12-31

Two distinct approaches for the coordinated setting of multimachine power system controllers are presented. The first strategy is based on the re-allocation of the poles related to the electromechanical modes of the system through decentralized control. The second method is a coordinated global procedure based on structurally constrained optimal control. Both approaches considered power system stabilizers and supplementary signals for static var compensators as the controllers to be adjusted. Other types of controllers, such as FACTS devices, can also be tuned by using the proposed techniques. A 13-machine, 77-bus power system which is based on the Brazilian South-Southeast interconnected network is employed to assess the performance of the proposed methods. (author) 14 refs., 1 fig., 7 tabs.

Geographic Information System (GIS) Emergency Support for the May 2000 Cerro Grande Wildfire, Los Alamos, New Mexico, USA

Energy Technology Data Exchange (ETDEWEB)

C.R.Mynard; G.N.Keating; P.M.Rich; D.R. Bleakly

2003-05-01

In May 2000 the Cerro Grande wildfire swept through Los Alamos, New Mexico, burning approximately 17,400 ha (43,000 acres) and causing evacuation of Los Alamos National Laboratory (LANL) and the communities of Los Alamos and White Rock. An integral part of emergency response during the fire was the use of geographic information system (GIS) technology, which continues to be used in support of post-fire restoration and environmental monitoring. During the fire Laboratory GIS staff and volunteers from other organizations worked to produce maps and provide support for emergency managers, including at an emergency GIS facility in Santa Fe. Subsequent to the fire, Laboratory GIS teams supported the multiagency Burned Area Emergency Rehabilitation (BAER) team to provide GIS data and maps for planning mitigation efforts. The GIS teams continue to help researchers, operations personnel, and managers deal with the tremendous changes caused by the fire. Much of the work is under the auspices of the Cerro Grande Rehabilitation Project (CGRP) to promote recovery from fire damage, improve information exchange, enhance emergency management, and conduct mitigation activities. GIS efforts during the fire provided important lessons about institutional matters, working relationships, and emergency preparedness. These lessons include the importance of (1) an integrated framework for assessing natural and human hazards in a landscape context; (2) a strong GIS capability for emergency response; (3) coordinated emergency plans for GIS operations; (4) a method for employees to report their whereabouts and receive authoritative information during an evacuation; (5) GIS data that are complete, backed-up, and available during an emergency; (6) adaptation of GIS to the circumstances of the emergency; (7) better coordination in the GIS community; (8) better integration of GIS into LANL operations; and (9) a central data warehouse for data and metadata. These lessons are important for planning

Investigation of Spatial Data with Open Source Social Network Analysis and Geographic Information Systems Applications

Science.gov (United States)

Sabah, L.; Şimşek, M.

2017-11-01

Social networks are the real social experience of individuals in the online environment. In this environment, people use symbolic gestures and mimics, sharing thoughts and content. Social network analysis is the visualization of complex and large quantities of data to ensure that the overall picture appears. It is the understanding, development, quantitative and qualitative analysis of the relations in the social networks of Graph theory. Social networks are expressed in the form of nodes and edges. Nodes are people/organizations, and edges are relationships between nodes. Relations are directional, non-directional, weighted, and weightless. The purpose of this study is to examine the effects of social networks on the evaluation of person data with spatial coordinates. For this, the cluster size and the effect on the geographical area of the circle where the placements of the individual are influenced by the frequently used placeholder feature in the social networks have been studied.

PSS and TCSC damping controller coordinated design using PSO in multi-machine power system

Energy Technology Data Exchange (ETDEWEB)

Shayeghi, H., E-mail: hshayeghi@gmail.co [Technical Engineering Department, University of Mohaghegh Ardabili, Ardabil (Iran, Islamic Republic of); Safari, A.; Shayanfar, H.A. [Center of Excellence for Power System Automation and Operation, Electrical Engineering Department, Iran University of Science and Technology, Tehran (Iran, Islamic Republic of)

2010-12-15

The paper develops a new design procedure for simultaneous coordinated designing of the thyristor controlled series capacitor (TCSC) damping controller and power system stabilizer (PSS) in multi-machine power system. The coordinated design problem of PSS and TCSC damping controllers over a wide range of loading conditions is converted to an optimization problem with the time domain-based objective function that is solved by a particle swarm optimization (PSO) technique which has a strong ability to find the most optimistic results. By minimizing the proposed fitness function in which oscillatory characteristics between areas are included and thus the interactions among the TCSC controller and PSS under transient conditions in the multi-machine power system are improved. To ensure the robustness of the proposed stabilizers, the design process takes a wide range of operating conditions into account. The effectiveness of the proposed controller is demonstrated through the nonlinear time-domain simulation and some performance indices studies. The results of these studies show that the proposed coordinated controllers have an excellent capability in damping power system inter-area oscillations and enhance greatly the dynamic stability of the power system. Moreover, it is superior to both the uncoordinated designed stabilizers of the PSS and the TCSC damping controller.

Geographical data structures supporting regional analysis

International Nuclear Information System (INIS)

Edwards, R.G.; Durfee, R.C.

1978-01-01

In recent years the computer has become a valuable aid in solving regional environmental problems. Over a hundred different geographic information systems have been developed to digitize, store, analyze, and display spatially distributed data. One important aspect of these systems is the data structure (e.g. grids, polygons, segments) used to model the environment being studied. This paper presents eight common geographic data structures and their use in studies of coal resources, power plant siting, population distributions, LANDSAT imagery analysis, and landuse analysis

Synthesis of controllable and normal sublanguages for discrete-event systems using a coordinator

Czech Academy of Sciences Publication Activity Database

Komenda, Jan; Masopust, Tomáš; van Schuppen, J. H.

2011-01-01

Roč. 60, č. 7 (2011), s. 492-502 ISSN 0167-6911 R&D Projects: GA ČR(CZ) GAP103/11/0517; GA ČR(CZ) GPP202/11/P028 Grant - others:European Commission(XE) EU. ICT .DISC 224498 Institutional research plan: CEZ:AV0Z10190503 Keywords : discrete-event system * coordination control * coordinator Subject RIV: BA - General Mathematics Impact factor: 1.222, year: 2011 http://www.sciencedirect.com/science/article/pii/S0167691111000739

Synthesis of controllable and normal sublanguages for discrete-event systems using a coordinator

Czech Academy of Sciences Publication Activity Database

Komenda, Jan; Masopust, Tomáš; van Schuppen, J. H.

2011-01-01

Roč. 60, č. 7 (2011), s. 492-502 ISSN 0167-6911 R&D Projects: GA ČR(CZ) GAP103/11/0517; GA ČR(CZ) GPP202/11/P028 Grant - others:European Commission(XE) EU.ICT.DISC 224498 Institutional research plan: CEZ:AV0Z10190503 Keywords : discrete-event system * coordination control * coordinator Subject RIV: BA - General Mathematics Impact factor: 1.222, year: 2011 http://www.sciencedirect.com/science/article/pii/S0167691111000739

Russian and Foreign Experience of Integration of Agent-Based Models and Geographic Information Systems

Directory of Open Access Journals (Sweden)

Konstantin Anatol’evich Gulin

2016-11-01

Full Text Available The article provides an overview of the mechanisms of integration of agent-based models and GIS technology developed by Russian and foreign researchers. The basic framework of the article is based on critical analysis of domestic and foreign literature (monographs, scientific articles. The study is based on the application of universal scientific research methods: system approach, analysis and synthesis, classification, systematization and grouping, generalization and comparison. The article presents theoretical and methodological bases of integration of agent-based models and geographic information systems. The concept and essence of agent-based models are explained; their main advantages (compared to other modeling methods are identified. The paper characterizes the operating environment of agents as a key concept in the theory of agent-based modeling. It is shown that geographic information systems have a wide range of information resources for calculations, searching, modeling of the real world in various aspects, acting as an effective tool for displaying the agents’ operating environment and allowing to bring the model as close as possible to the real conditions. The authors also focus on a wide range of possibilities for various researches in different spatial and temporal contexts. Comparative analysis of platforms supporting the integration of agent-based models and geographic information systems has been carried out. The authors give examples of complex socio-economic models: the model of a creative city, humanitarian assistance model. In the absence of standards for research results description, the authors focus on the models’ elements such as the characteristics of the agents and their operation environment, agents’ behavior, rules of interaction between the agents and the external environment. The paper describes the possibilities and prospects of implementing these models

LUMIS: Land Use Management and Information Systems; coordinate oriented program documentation

Science.gov (United States)

1976-01-01

An integrated geographic information system to assist program managers and planning groups in metropolitan regions is presented. The series of computer software programs and procedures involved in data base construction uses the census DIME file and point-in-polygon architectures. The system is described in two parts: (1) instructions to operators with regard to digitizing and editing procedures, and (2) application of data base construction algorithms to achieve map registration, assure the topological integrity of polygon files, and tabulate land use acreages within administrative districts.

Use of Geographic Information Systems for Planning HIV Prevention Interventions for High-Risk Youths

Science.gov (United States)

Geanuracos, Catherine G.; Cunningham, Shayna D.; Weiss, George; Forte, Draco; Henry Reid, Lisa M.; Ellen, Jonathan M.

2007-01-01

Geographic information system (GIS) analysis is an emerging tool for public health intervention planning. Connect to Protect, a researcher–community collaboration working in 15 cities to reduce HIV infection among youths, developed GIS databases of local health, crime, and demographic data to evaluate the geographic epidemiology of sexually transmitted infections and HIV risk among adolescents. We describe the process and problems of data acquisition, analysis, and mapping in the development of structural interventions, demonstrating how program planners can use this technology to inform and improve planning decisions. The Connect to Protect project’s experience suggests strategies for incorporating public data and GIS technology into the next generation of public health interventions. PMID:17901452

Louisville region demonstration of travel management coordination center : system pre-deployment preparation.

Science.gov (United States)

2013-03-01

The purpose of the Greater Louisville Region Demonstration of Travel Management Coordination Center (TMCC): System Pre-Deploy-ment Preparation grant was to further phased implementation of the regions TMCC design by focusing on two major component...

Coordinated Secondary Control for Balanced Discharge Rate of Energy Storage System in Islanded AC Microgrids

DEFF Research Database (Denmark)

Guan, Yajuan; Quintero, Juan Carlos Vasquez; Guerrero, Josep M.

2016-01-01

A coordinated secondary control approach based on an autonomous current-sharing control strategy for balancing the discharge rates of energy storage systems (ESSs) in islanded AC microgrids is proposed in this paper. The coordinated secondary controller can regulate the power outputs of distributed...... incidents and unintentional outages in DG units, but also aims to provide a fast transient response and an accurate output-current-sharing performance. A complete root locus analysis is given in order to achieve system stability and parameter sensitivity. Experimental results are presented to show...... the performance of the whole system and to verify the effectiveness of the proposed controller....

Talking about the institutional complexity of the integrated rehabilitation system – the importance of coordination

OpenAIRE

Miettinen, Sari; Ashorn, Ulla; Lehto, Juhani

2013-01-01

Rehabilitation in Finland is a good example of functions divided among several welfare sectors, such as health services and social services.  The rehabilitation system in Finland is a complex one and there have been many efforts to create a coordinated entity. The purpose of this study is to open up a complex welfare system at the upper policy level and to understand the meaning of coordination at the level of service delivery. We shed light in particular on the national rehabilitation policy...

Patient- and family-centered care coordination: a framework for integrating care for children and youth across multiple systems.

Science.gov (United States)

2014-05-01

Understanding a care coordination framework, its functions, and its effects on children and families is critical for patients and families themselves, as well as for pediatricians, pediatric medical subspecialists/surgical specialists, and anyone providing services to children and families. Care coordination is an essential element of a transformed American health care delivery system that emphasizes optimal quality and cost outcomes, addresses family-centered care, and calls for partnership across various settings and communities. High-quality, cost-effective health care requires that the delivery system include elements for the provision of services supporting the coordination of care across settings and professionals. This requirement of supporting coordination of care is generally true for health systems providing care for all children and youth but especially for those with special health care needs. At the foundation of an efficient and effective system of care delivery is the patient-/family-centered medical home. From its inception, the medical home has had care coordination as a core element. In general, optimal outcomes for children and youth, especially those with special health care needs, require interfacing among multiple care systems and individuals, including the following: medical, social, and behavioral professionals; the educational system; payers; medical equipment providers; home care agencies; advocacy groups; needed supportive therapies/services; and families. Coordination of care across settings permits an integration of services that is centered on the comprehensive needs of the patient and family, leading to decreased health care costs, reduction in fragmented care, and improvement in the patient/family experience of care. Copyright © 2014 by the American Academy of Pediatrics.

Columbia River Coordinated Information System (CIS), 1992-1993 Annual Report.

Energy Technology Data Exchange (ETDEWEB)

Rowe, Mike; Roger, Phillip B.; O' Connor, Dick

1993-11-01

The purposes of this report are to: (1) describe the project to date; (2) to document the work and accomplishments of the (CIS) project for Fiscal Year 1993; and (3) to provide a glimpse of future project direction. The concept of a Coordinated Information System (CIS) as an approach to meeting the growing needs for regionally standardized anadromous fish information.

The Significance of Coordination for Industrialised Building System (IBS Precast Concrete in Construction Industry

Directory of Open Access Journals (Sweden)

Fitri Othman Mohd Khairul

2017-01-01

Full Text Available IBS precast concrete is construction system which is meant to improve the conventional construction process. However IBS precast concrete projects are suffering from serious problems such as cost overrun, delays and less quality of the end product. The absence of coordination is perceived as the reason for this issue. The purpose of this paper is to review the significance of coordination for IBS precast concrete in the construction industry. It if found that the fragmentation which occurs in the construction industry requires continuity of coordination due to the construction activities are intertwined in nature. Coordination is designated to assist stakeholders in completing and complementing each other with the paramount focus of achieving the objective. Proper coordination is required in delivering the desired construction product at the ideal time, cost and quality. As for the findings, the significance of coordination for IBS precast concrete can be seen through the precast concrete construction phases which consist of planning; design; manufacturing; transportation and installation/construction. These phases are meant to complement construction process with the purpose to reduce issues of fragmentation and enhance IBS precast concrete project delivery.

Hospital distribution in a metropolitan city: assessment by a geographical information system grid modelling approach

Directory of Open Access Journals (Sweden)

Kwang-Soo Lee

2014-05-01

Full Text Available Grid models were used to assess urban hospital distribution in Seoul, the capital of South Korea. A geographical information system (GIS based analytical model was developed and applied to assess the situation in a metropolitan area with a population exceeding 10 million. Secondary data for this analysis were obtained from multiple sources: the Korean Statistical Information Service, the Korean Hospital Association and the Statistical Geographical Information System. A grid of cells measuring 1 × 1 km was superimposed on the city map and a set of variables related to population, economy, mobility and housing were identified and measured for each cell. Socio-demographic variables were included to reflect the characteristics of each area. Analytical models were then developed using GIS software with the number of hospitals as the dependent variable. Applying multiple linear regression and geographically weighted regression models, three factors (highway and major arterial road areas; number of subway entrances; and row house areas were statistically significant in explaining the variance of hospital distribution for each cell. The overall results show that GIS is a useful tool for analysing and understanding location strategies. This approach appears a useful source of information for decision-makers concerned with the distribution of hospitals and other health care centres in a city.

Using geographical and taxonomic metadata to set priorities in specimen digitization

Directory of Open Access Journals (Sweden)

Walter G. Berendsohn

2010-10-01

Full Text Available Digitizing the information carried by specimens in natural history collections is a key endeavor providing falsifiable information about past and present biodiversity on a global scale, for application in a variety of research fields far beyond the current application in biosystematics. Existing digitization efforts are driven by individual institutional necessities and are not coordinated on a global scale. This led to an over-all information resource that is patchy in taxonomic and geographic coverage as well as in quality. Digitizing all specimens is not an achievable aim at present, so that priorities need to be set. Most biodiversity studies are both taxonomically and geographically restricted, but access to non-digitized collection information is almost exclusively by taxon name. Creating a “Geotaxonomic Index” providing metadata on the number of specimens from a specific geographic region belonging to a specific higher taxonomic category may provide a means to attract the attention of researchers and governments towards relevant non-digitized holdings of the collections and set priorities for their digitization according to the needs of information users outside the taxonomic community.

GEOGRAPHIC INFORMATION SYSTEM AND REMOTE SENSING BASED DISASTER MANAGEMENT AND DECISION SUPPORT PLATFORM: AYDES

OpenAIRE

Keskin, İ.; Akbaba, N.; Tosun, M.; Tüfekçi, M. K.; Bulut, D.; Avcı, F.; Gökçe, O.

2018-01-01

The accelerated developments in information technology in recent years, increased the amount of usage of Geographic Information Systems (GIS) and Remote Sensing (RS) in disaster management considerably and the access from mobile and web-based platforms to continuous, accurate and sufficient data needed for decision-making became easier accordingly. The Disaster Management and Decision Support System (AYDES) has been developed with the purpose of managing the disaster and emergency manageme...

Forest management applications of Landsat data in a geographic information system

Science.gov (United States)

Maw, K. D.; Brass, J. A.

1982-01-01

The utility of land-cover data resulting from Landsat MSS classification can be greatly enhanced by use in combination with ancillary data. A demonstration forest management applications data base was constructed for Santa Cruz County, California, to demonstrate geographic information system applications of classified Landsat data. The data base contained detailed soils, digital terrain, land ownership, jurisdictional boundaries, fire events, and generalized land-use data, all registered to a UTM grid base. Applications models were developed from problems typical of fire management and reforestation planning.

GIS in Evaluation: Utilizing the Power of Geographic Information Systems to Represent Evaluation Data

Science.gov (United States)

Azzam, Tarek; Robinson, David

2013-01-01

This article provides an introduction to geographic information systems (GIS) and how the technology can be used to enhance evaluation practice. As a tool, GIS enables evaluators to incorporate contextual features (such as accessibility of program sites or community health needs) into evaluation designs and highlights the interactions between…

Coordination of care in the Chinese health care systems: a gap analysis of service delivery from a provider perspective.

Science.gov (United States)

Wang, Xin; Birch, Stephen; Zhu, Weiming; Ma, Huifen; Embrett, Mark; Meng, Qingyue

2016-10-12

Increases in health care utilization and costs, resulting from the rising prevalence of chronic conditions related to the aging population, is exacerbated by a high level of fragmentation that characterizes health care systems in China. There have been several pilot studies in China, aimed at system-level care coordination and its impact on the full integration of health care system, but little is known about their practical effects. Huangzhong County is one of the pilot study sites that introduced organizational integration (a dimension of integrated care) among health care institutions as a means to improve system-level care coordination. The purposes of this study are to examine the effect of organizational integration on system-level care coordination and to identify factors influencing care coordination and hence full integration of county health care systems in rural China. We chose Huangzhong and Hualong counties in Qinghai province as study sites, with only Huangzhong having implemented organizational integration. A mixed methods approach was used based on (1) document analysis and expert consultation to develop Best Practice intervention packages; (2) doctor questionnaires, identifying care coordination from the perspective of service provision. We measured service provision with gap index, overlap index and over-provision index, by comparing observed performance with Best Practice; (3) semi-structured interviews with Chiefs of Medicine in each institution to identify barriers to system-level care coordination. Twenty-nine institutions (11 at county-level, 6 at township-level and 12 at village-level) were selected producing surveys with a total of 19 schizophrenia doctors, 23 diabetes doctors and 29 Chiefs of Medicine. There were more care discontinuities for both diabetes and schizophrenia in Huangzhong than in Hualong. Overall, all three index scores (measuring service gaps, overlaps and over-provision) showed similar tendencies for the two conditions

The coordinated development of China＇ s inland water transport%The coordinated development of China' s inland water transport

Institute of Scientific and Technical Information of China (English)

Deng Aimin; Tian Feng; Haasis H.D; Mao Lang; Cai Jia

2012-01-01

The coordinated development is the core of sustainable development and the hot issue of international research. Inland water transport (IWT) is an important part of the water resources exploiting system and comprehensive transport system under socio-economic context of river basin, and also the country' s sustainable development priorities to achieve resource-conserving and environment-friendly strategy. Based on the coordinated development content, the paper combined Germany' s successful development experience, explored the elements and problem of the coordinated development of IWT system of China' s national economic strategy and basin economy, water resourse system, comprehensive transport system, and system itself, and their countermeasures and suggestions, in order to facilitate rapid and coordinated development of China' s inland water transport.

Nation-wide, web-based, geographic information system for the integrated surveillance and control of dengue fever in Mexico.

Directory of Open Access Journals (Sweden)

Juan Eugenio Hernández-Ávila

Full Text Available Dengue fever incidence and its geographical distribution are increasing throughout the world. Quality and timely information is essential for its prevention and control. A web based, geographically enabled, dengue integral surveillance system (Dengue-GIS was developed for the nation-wide collection, integration, analysis and reporting of geo-referenced epidemiologic, entomologic, and control interventions data. Consensus in the design and practical operation of the system was a key factor for its acceptance. Working with information systems already implemented as a starting point facilitated its acceptance by officials and operative personnel. Dengue-GIS provides the geographical detail needed to plan, asses and evaluate the impact of control activities. The system is beginning to be adopted as a knowledge base by vector control programs. It is used to generate evidence on impact and cost-effectiveness of control activities, promoting the use of information for decision making at all levels of the vector control program. Dengue-GIS has also been used as a hypothesis generator for the academic community. This GIS-based model system for dengue surveillance and the experience gathered during its development and implementation could be useful in other dengue endemic countries and extended to other infectious or chronic diseases.

On the theory of transformations of coordinates for massive systems of reference

International Nuclear Information System (INIS)

Sadykov, B.S.

1978-01-01

Suggested is a new local group of coordinate transformations of reference systems connected with massive bodies, such as the Earth, the Sun and so on, which are rather inertial in the kinematic relation, but possess different gravitational fields. The effect of the gravitational field of the reference body upon the metric of the system is taken into account. For identical systems the new group transfers into the Lorentz group

The role of Geographic Information Systems in the Office of the Supervising Scientist

International Nuclear Information System (INIS)

Riley, S.J.

1992-01-01

A Geographic Information System (GIS), embedded in a Decision Support System linking spatial data bases and biophysical models of the environment, will be an important tool in the design and assessment of rehabilitation of uranium mines in the Alligator Rivers Region. The Office of the Supervising Scientist (OSS) and the Northern Territory of University are collaborating in the development of GIS and its introduction into rehabilitation planning. The achievements obtained to date are briefly outlined. There is every expectation that the system developed by OSS will be of general use in environmental assessment and management. 33 refs., 1 fig

USGS Geographic Names (GNIS) Overlay Map Service from The National Map - National Geospatial Data Asset (NGDA) Geographic Names Information System (GNIS)

Data.gov (United States)

U.S. Geological Survey, Department of the Interior — USGS developed The National Map (TNM) Gazetteer as the Federal and national standard (ANSI INCITS 446-2008) for geographic nomenclature based on the Geographic Names...

Integrating remote sensing, geographic information systems and global positioning system techniques with hydrological modeling

Science.gov (United States)

Thakur, Jay Krishna; Singh, Sudhir Kumar; Ekanthalu, Vicky Shettigondahalli

2017-07-01

Integration of remote sensing (RS), geographic information systems (GIS) and global positioning system (GPS) are emerging research areas in the field of groundwater hydrology, resource management, environmental monitoring and during emergency response. Recent advancements in the fields of RS, GIS, GPS and higher level of computation will help in providing and handling a range of data simultaneously in a time- and cost-efficient manner. This review paper deals with hydrological modeling, uses of remote sensing and GIS in hydrological modeling, models of integrations and their need and in last the conclusion. After dealing with these issues conceptually and technically, we can develop better methods and novel approaches to handle large data sets and in a better way to communicate information related with rapidly decreasing societal resources, i.e. groundwater.

Inaccuracies when mixing coordinate reference frameworks in a system of systems simulation

CSIR Research Space (South Africa)

Duvenhage, B

2007-09-01

Full Text Available commonly used are flat and spherical earth. Another well known ERM is the World Geodetic System from 1984 (WGS 84). For the purposes of this paper the authors however focus on the simpler flat and spherical earth models with example coordinate... words, the equatorial and pole to pole diameters of the earth, as modelled in this ERM, are equal. This paper will use the term ‘real world’ ERMs to refer to spherical, WGS 84 and better ERM approximations. A. The Earth-Centred, Earth...

Using Geographic Information Systems in Knowledge Management Processes

Directory of Open Access Journals (Sweden)

Dr. Filiz Gürder

2013-07-01

Full Text Available Nowadays, organizations are required to develop quick and accurate responses to internal and external changes that gain momentum. In this context, knowledge management activities become more important to all organizations. On the other hand, Geographic Information Systems (GIS become common more and more. GIS which address a broad spectrum of users such as public agencies, local communities, civil society organizations, the private sector, academic environment, and personal users have been aiming to solve problems which occurred in location-based areas. GIS are important to get, combine, analyze and transfer the spatial data. Common use of PCs for personal needs, digital geography and improvements of software technologies, also the need to make socially acceptable business decisions facilitated development and widespread use of GIS applications. The main purpose of this paper is to discuss using areas and contribution potentials of GIS in enterprise-wide knowledge management processes.

Integrating Geographical Information Systems (GIS) with Hydrological Modelling – Applicability and Limitations

OpenAIRE

Rajesh VijayKumar Kherde; Dr. Priyadarshi. H. Sawant

2013-01-01

The evolution of Geographic information systems (GIS) facilitated the use digital terrain data for topography based hydrological modelling. The use of spatial data for hydrological modelling emerged from the great capability of GIS tools to store and handle the data associated hydro-morphology of the basin. These models utilize the spatially variable terrain data for converting rainfall into surface runoff.Manual map manipulation has always posed difficulty in analysing and designing large sc...

Transportation Routing Analysis Geographic Information System (WebTRAGIS) User's Manual

International Nuclear Information System (INIS)

Michelhaugh, R.D.

2000-01-01

In the early 1980s, Oak Ridge National Laboratory (ORNL) developed two transportation routing models: HIGHWAY, which predicts truck transportation routes, and INTERLINE, which predicts rail transportation routes. Both of these models have been used by the U.S. Department of Energy (DOE) community for a variety of routing needs over the years. One of the primary uses of the models has been to determine population-density information, which is used as input for risk assessment with the RADTRAN model, which is available on the TRANSNET computer system. During the recent years, advances in the development of geographic information systems (GISs) have resulted in increased demands from the user community for a GIS version of the ORNL routing models. In April 1994, the DOE Transportation Management Division (EM-261) held a Baseline Requirements Assessment Session with transportation routing experts and users of the HIGHWAY and INTERLINE models. As a result of the session, the development of a new GIS routing model, Transportation Routing Analysis GIS (TRAGIS), was initiated. TRAGIS is a user-friendly, GIS-based transportation and analysis computer model. The older HIGHWAY and INTERLINE models are useful to calculate routes, but they cannot display a graphic of the calculated route. Consequently, many users have experienced difficulty determining the proper node for facilities and have been confused by or have misinterpreted the text-based listing from the older routing models. Some of the primary reasons for the development of TRAGIS are (a) to improve the ease of selecting locations for routing, (b) to graphically display the calculated route, and (c) to provide for additional geographic analysis of the route

Resilient Coordination of Networked Multiagent Systems Based on Distributed State Emulators

OpenAIRE

Yucelen, Tansel; De La Torre, Gerardo

2014-01-01

This note studies resilient coordination of networked multiagent systems in the presence of misbehaving agents, i.e., agents that are subject to adversaries modeled as exogenous disturbances. Apart from the existing relevant literature that make specific assumptions on the graph topology and/or the fraction of misbehaving agents, we present an adaptive control architecture based on distributed state emulators and show that the nominal networked multiagent system behavior can be retrieved even...

Immersion and Invariance-Based Coordinated Generator Excitation and SVC Control for Power Systems

Directory of Open Access Journals (Sweden)

Adirak Kanchanaharuthai

2014-01-01

Full Text Available A nonlinear coordinated control of excitation and SVC of an electrical power system is proposed for transient stability, and voltage regulation enhancement after the occurrence of a large disturbance and a small perturbation. Using the concept of Immersion and Invariance (I&I design methodology, the proposed nonlinear controller is used to not only achieve power angle stability, frequency and voltage regulation but also ensure that the closed-loop system is transiently and asymptotically stable. In order to show the effectiveness of the proposed controller design, the simulation results illustrate that, in spite of the case where a large perturbation occurs on the transmission line or there is a small perturbation to mechanical power inputs, the proposed controller can not only keep the system transiently stable but also simultaneously accomplish better dynamic properties of the system as compared to operation with the existing controllers designed through a coordinated passivation technique controller and a feedback linearization scheme, respectively.

Cartography and Geographic Information Science in Current Contents

Directory of Open Access Journals (Sweden)

Nedjeljko Frančula

2009-12-01

Full Text Available The Cartography and Geographic Information Science (CaGIS journal was published as The American Cartographer from 1974 to 1989, after that as Cartography and Geographic Information System, and since then has been published with its current name. It is published by the Cartography and Geographic Information Society, a member of the American Congress on Surveying and Mapping.

Control Coordination of Large Scale Hereditary Systems.

Science.gov (United States)

1985-07-01

Theory - A Hilbert Space Approach, (Academic Press, New York, 1982). [4] W. Findeisen , F. N. Bailey, M. Brdys, K Malinowski, P. Tatjewski and A. Wozniak... Findeisen et al. (1980), in the sense that local models are used in the design of component control laws and a higher level coordination problem is...Vol. 1, pp. 590-591, 1985. 3. W. Findeisen , F.N. Bailley, M. Brdys, K. Malinowski, P. Tatjewski and A. Wozniak, Control Coordination in Hierarchical

Coordinated robotic system for civil structural health monitoring

Directory of Open Access Journals (Sweden)

Qidwai Uvais

2017-01-01

Full Text Available With the recent advances in sensors, robotics, unmanned aerial vehicles, communication, and information technologies, it is now feasible to move towards the vision of ubiquitous cities, where virtually everything throughout the city is linked to an information system through technologies such as wireless networking and radio-frequency identification (RFID tags, to provide systematic and more efficient management of urban systems, including civil and mechanical infrastructure monitoring, to achieve the goal of resilient and sustainable societies. In this proposed system, unmanned aerial vehicle (UAVs is used to ascertain the coarse defect signature using panoramic imaging. This involves image stitching and registration so that a complete view of the surface is seen with reference to a common reference or origin point. Thereafter, crack verification and localization has been done using the magnetic flux leakage (MFL approach which has been performed with the help of a coordinated robotic system. In which the first robot is placed at the top of the structure whereas the second robot is equipped with the designed MFL sensory system. With the initial findings, the proposed system identifies and localize the crack in the given structure.

Evaluation of alternatives for power system coordination and pooling in a competitive environment

International Nuclear Information System (INIS)

Rudnick, H.; Varela, R.; Hogan, W.

1997-01-01

The paper defines and classifies essential issues that relate the need for electric power system coordination with the increasing development of competition. Principles are formulated and a coordination model and a market structure are proposed, emphasizing the need for economic dispatch in the wholesale market. A detailed comparison is made of the market and pooling implementations developed in Argentina and Chile, countries that have pioneered the creation of competitive markets in the electric energy sector. An evaluation of strengths and weaknesses of those two implementations is included

Surveying and Mapping Geographical Information from the Perspective of Geography

Directory of Open Access Journals (Sweden)

LÜ Guonian

2017-10-01

Full Text Available It briefly reviewed the history of geographic information content development since the existence of geographic information system. It pointed out that the current definition of geographic information is always the extension from the "spatial+ attributes" basic mapping framework of geographic information. It is increasingly difficult to adapt to the analysis and application of spatial-temporal big data. From the perspective of geography research subject and content, it summarized systematically that the content and extension of the "geographic information" that geography needs. It put forward that a six-element expression model of geographic information, including spatial location, semantic description, attribute characteristics, geometric form, evolution process, and objects relationship.Under the guidance of the laws of geography, for geographical phenomenon of spatial distribution, temporal pattern and evolution process, the interaction mechanism of the integrated expression, system analysis and efficient management, it designed that a unified GIS data model which is expressed by six basic elements, a new GIS data structure driven by geographical rules and interaction, and key technologies of unstructured spatio-temporal data organization and storage. It provided that a theoretical basis and technical support for the shift from the surveying and mapping geographic information to the scientific geographic information, and it can help improving the organization, management, analysis and expression ability of the GIS of the geographical laws such as geographical pattern, evolution process, and interaction between elements.

Universal mechatronics coordinator

Science.gov (United States)

Muir, Patrick F.

1999-11-01

Mechatronic systems incorporate multiple actuators and sensor which must be properly coordinated to achieve the desired system functionality. Many mechatronic systems are designed as one-of-a-kind custom projects without consideration for facilitating future system or alterations and extensions to the current syste. Thus, subsequent changes to the system are slow, different, and costly. It has become apparent that manufacturing processes, and thus the mechatronics which embody them, need to be agile in order to more quickly and easily respond to changing customer demands or market pressures. To achieve agility, both the hardware and software of the system need to be designed such that the creation of new system and the alteration and extension of current system is fast and easy. This paper describes the design of a Universal Mechatronics Coordinator (UMC) which facilitates agile setup and changeover of coordination software for mechatronic systems. The UMC is capable of sequencing continuous and discrete actions that are programmed as stimulus-response pairs, as state machines, or a combination of the two. It facilitates the modular, reusable programing of continuous actions such as servo control algorithms, data collection code, and safety checking routines; and discrete actions such as reporting achieved states, and turning on/off binary devices. The UMC has been applied to the control of a z- theta assembly robot for the Minifactory project and is applicable to a spectrum of widely differing mechatronic systems.

Geographical Information System Model for Potential Mines Data Management Presentation in Kabupaten Gorontalo

Science.gov (United States)

Roviana, D.; Tajuddin, A.; Edi, S.

2017-03-01

Mining potential in Indonesian is very abundant, ranging from Sabang to Marauke. Kabupaten Gorontalo is one of many places in Indonesia that have different types of minerals and natural resources that can be found in every district. The abundant of mining potential must be balanced with good management and ease of getting information by investors. The current issue is, (1) ways of presenting data/information about potential mines area is still manually (the maps that already capture from satellite image, then printed and attached to information board in the office) it caused the difficulties of getting information; (2) the high cost of maps printing; (3) the difficulties of regency leader (bupati) to obtain information for strategic decision making about mining potential. The goal of this research is to build a model of Geographical Information System that could provide data management of potential mines, so that the investors could easily get information according to their needs. To achieve that goal Research and Development method is used. The result of this research, is a model of Geographical Information System that implemented in an application to presenting data management of mines.

A Direct Method for Mapping the Center of Pressure Measured by an Insole Pressure Sensor System to the Shoe's Local Coordinate System.

Science.gov (United States)

Weaver, Brian T; Braman, Jerrod E; Haut, Roger C

2016-06-01

A direct method to express the center of pressure (CoP) measured by an insole pressure sensor system (IPSS) into a known coordinate system measured by motion tracking equipment is presented. A custom probe was constructed with reflective markers to allow its tip to be precisely tracked with motion tracking equipment. This probe was utilized to activate individual sensors on an IPSS that was placed in a shoe fitted with reflective markers used to establish a local shoe coordinate system. When pressed onto the IPSS the location of the probe's tip was coincident with the CoP measured by the IPSS (IPSS-CoP). Two separate pushes (i.e., data points) were used to develop vectors in each respective coordinate system. Simple vector mathematics determined the rotational and translational components of the transformation matrix needed to express the IPSS-CoP into the local shoe coordinate system. Validation was performed by comparing IPSS-CoP with an embedded force plate measured CoP (FP-CoP) from data gathered during kinematic trials. Six male subjects stood on an embedded FP and performed anterior/posterior (AP) sway, internal rotation, and external rotation of the body relative to a firmly planted foot. The IPSS-CoP was highly correlated with the FP-CoP for all motions, root mean square errors (RMSRRs) were comparable to other research, and there were no statistical differences between the displacement of the IPSS-CoP and FP-CoP for both the AP and medial/lateral (ML) axes, respectively. The results demonstrated that this methodology could be utilized to determine the transformation variables need to express IPSS-CoP into a known coordinate system measured by motion tracking equipment and that these variables can be determined outside the laboratory anywhere motion tracking equipment is available.

Renewable Energy Assessment of Bureau of Reclamation Land and Facilities Using Geographic Information Systems

Energy Technology Data Exchange (ETDEWEB)

Heimiller, D.; Haase, S.; Melius, J.

2013-05-01

This report summarizes results of geographic information system screening for solar and wind potential at select Bureau of Reclamation lands in the western United States. The study included both utility-scale and facility-scale potential. This study supplements information in the report titled Renewable Energy Assessment for the Bureau of Reclamation: Final Report.

Development of an International School Nurse Asthma Care Coordination Model

Science.gov (United States)

Garwick, Ann W.; Svavarsdóttir, Erla Kolbrun; Seppelt, Ann M.; Looman, Wendy S.; Anderson, Lori S.; Örlygsdóttir, Brynja

2015-01-01

Aim To identify and compare how school nurses in Reykjavik, Iceland and St. Paul, Minnesota coordinated care for youth with asthma (ages 10–18) and to develop an asthma school nurse care coordination model. Background Little is known about how school nurses coordinate care for youth with asthma in different countries. Design A qualitative descriptive study design using focus group data. Methods Six focus groups with 32 school nurses were conducted in Reykjavik (n=17) and St. Paul (n=15) using the same protocol between September 2008 – January 2009. Descriptive content analytic and constant comparison strategies were used to categorize and compare how school nurses coordinated care, which resulted in the development of an International School Nurse Asthma Care Coordination Model. Findings Participants in both countries spontaneously described a similar asthma care coordination process that involved information gathering, assessing risk for asthma episodes, prioritizing health care needs and anticipating and planning for student needs at the individual and school levels. This process informed how they individualized symptom management, case management and/or asthma education. School nurses played a pivotal part in collaborating with families, school and health care professionals to ensure quality care for youth with asthma. Conclusions Results indicate a high level of complexity in school nurses’ approaches to asthma care coordination that were responsive to the diverse and changing needs of students in school settings. The conceptual model derived provides a framework for investigators to use in examining the asthma care coordination process of school nurses in other geographic locations. PMID:25223389

Development of an International School Nurse Asthma Care Coordination Model.

Science.gov (United States)

Garwick, Ann W; Svavarsdóttir, Erla Kolbrun; Seppelt, Ann M; Looman, Wendy S; Anderson, Lori S; Örlygsdóttir, Brynja

2015-03-01

To identify and compare how school nurses in Reykjavik, Iceland and St. Paul, Minnesota coordinated care for youth with asthma (ages 10-18) and to develop an asthma school nurse care coordination model. Little is known about how school nurses coordinate care for youth with asthma in different countries. A qualitative descriptive study design using focus group data. Six focus groups with 32 school nurses were conducted in Reykjavik (n = 17) and St. Paul (n = 15) using the same protocol between September 2008 and January 2009. Descriptive content analytic and constant comparison strategies were used to categorize and compare how school nurses coordinated care, which resulted in the development of an International School Nurse Asthma Care Coordination Model. Participants in both countries spontaneously described a similar asthma care coordination process that involved information gathering, assessing risk for asthma episodes, prioritizing healthcare needs and anticipating and planning for student needs at the individual and school levels. This process informed how they individualized symptom management, case management and/or asthma education. School nurses played a pivotal part in collaborating with families, school and healthcare professionals to ensure quality care for youth with asthma. Results indicate a high level of complexity in school nurses' approaches to asthma care coordination that were responsive to the diverse and changing needs of students in school settings. The conceptual model derived provides a framework for investigators to use in examining the asthma care coordination process of school nurses in other geographic locations. © 2014 John Wiley & Sons Ltd.

Knowledge-based geographic information systems on the Macintosh computer: a component of the GypsES project

Science.gov (United States)

Gregory Elmes; Thomas Millette; Charles B. Yuill

1991-01-01

GypsES, a decision-support and expert system for the management of Gypsy Moth addresses five related research problems in a modular, computer-based project. The modules are hazard rating, monitoring, prediction, treatment decision and treatment implementation. One common component is a geographic information system designed to function intelligently. We refer to this...

Population connectivity among geographic variants within the Lutjanidae (Pisces of the Mexican Pacific coast through fish scale shape recognition

Directory of Open Access Journals (Sweden)

Ana L. Ibáñez

2012-11-01

Full Text Available Fish scale shape was used to identify geographic variants among Lutjanidae (Lutjanus argentiventris, L. guttatus and L. peru. Specimens were collected from three different geographic areas, north to south of the tropical Pacific coast of Mexico: Puerto Vallarta (PV, Manzanillo (MA and Caleta de Campos (CC. Configuration of landmark coordinates of fish scales were scaled, translated and rotated using generalized procrustes analysis, followed by principal components analysis of resulting shape coordinates. Principal component scores were submitted to cross-validated discriminant analysis to determine the efficacy of scale landmarks for discrimination by geographic variants. This was done with shape and form (shape plus size. PV and MA were recognized as one population different from the CC sampling area. Using only shape (without size, identification rates predicted geographic variant membership much better than chance (91.3%, 70.6% and 85.4% for L. argentiventris, L. guttatus and L. peru, respectively, and taking size into account, classification is somewhat improved (90.6%, 80.1% and 87.5% for L. argentiventris, L. guttatus and L. peru, respectively. Consistency of the two populations for the three species shows non-fortuitous events. Population discrimination confirmed previous genetic studies that show a zoogeographic barrier between the North Equatorial Current and the California Current. The method is non-destructive, fast and less expensive than genetic analysis, thus allowing screening of many individuals for traceability of fish.

Comparison of Turkey’s Geographical Regions in terms of Stand-Alone PV System Design and Cost Parameters

Directory of Open Access Journals (Sweden)

Nevzat Onat

2017-01-01

Full Text Available Stand-alone photovoltaic (SAPV systems are widely used in rural areas where there is no national grid or as a precaution against power outages. In this study, technical and economic analysis of a SAPV system was carried out using meteorological data for 75 province centers in seven geographical regions of Turkey. Obtained results for each province center were separated by geographical area. The averages of the centers for each region are taken as output. A calculation algorithm based on MsExcel has been established for these operations. The analyses made with the developed algorithm are repeated for five different scenarios that they cover periods of time when a constant strong load is active for all seasons (winter, spring, summer, and autumn and all year round. The developed algorithm calculates the life-cycle cost, the unit energy cost, the electrical capacity utilization rate, the amount of generated/excess energy per month, the initial investment/replacement, and operating and maintenance (O&M costs of each element. As a result, geographical regions of Turkey are compared in terms of these outputs graphically. Further investigations may include the sale of excess energy generated, small-scale PV system cost factors parallel to the grid, and the effects of government incentives.

Modeling of the dynamics of GBB1005 Ball & Beam Educational Control System as a controlled mechanical system with a redundant coordinate

Directory of Open Access Journals (Sweden)

A. Ya. Krasinskii

2014-01-01

Full Text Available The method of research stability and stabilization of equilibrium of systems with geometrical constraints is elaborated and used for equilibrium for real mechatronic arrangement GBB1005 Ball & Beam. For mathematical model construction is used Shul'gin's equations with redundant coordinates. The through differentiation geometrical constraints obtained kinematic (holonomic constraints is necessary add for stability analysis. Asymptotic stability equilibrium for mechanical systems with redundant coordinates is possible , in spite of formal reduction to Lyapunov's especial case, if the number zero roots is equal the number constraints . More exact nonlinear mathematical model of the mechanical component Ball &Beam is considered in this paper. One nonlinear geometric constrain in this problem is allow find the new equilibrium position. The choice of linear control subsystem is depend from the choice of redundant coordinate.

The Earth System Prediction Suite: Toward a Coordinated U.S. Modeling Capability

Science.gov (United States)

Theurich, Gerhard; DeLuca, C.; Campbell, T.; Liu, F.; Saint, K.; Vertenstein, M.; Chen, J.; Oehmke, R.; Doyle, J.; Whitcomb, T.;

Air pollution simulation and geographical information systems (GIS) applied to Athens International Airport.

Science.gov (United States)

Theophanides, Mike; Anastassopoulou, Jane

2009-07-01

This study presents an improved methodology for analysing atmospheric pollution around airports using Gaussian-plume numerical simulation integrated with Geographical Information Systems (GIS). The new methodology focuses on streamlining the lengthy analysis process for Airport Environmental Impact Assessments by integrating the definition of emission sources, simulating and displaying the results in a GIS environment. One of the objectives of the research is to validate the methodology applied to the Athens International Airport, "Eleftherios Venizelos", to produce a realistic estimate of emission inventories, dispersion simulations and comparison to measured data. The methodology used a combination of the Emission Dispersion and Modelling System (EDMS) and the Atmospheric Dispersion and Modelling system (ADMS) to improve the analysis process. The second objective is to conduct numerical simulations under various adverse conditions (e.g. scenarios) and assess the dispersion in the surrounding areas. The study concludes that the use of GIS in environmental assessments provides a valuable advantage for organizing data and entering accurate geographical/topological information for the simulation engine. Emissions simulation produced estimates within 10% of published values. Dispersion simulations indicate that airport pollution will affect neighbouring cities such as Rafina and Loutsa. Presently, there are no measured controls in these areas. In some cases, airport pollution can contribute to as much as 40% of permissible EU levels in VOCs.

A computer program for generating two-dimensional boundary-fitted orthogonal curvilinear coordinate systems

Energy Technology Data Exchange (ETDEWEB)

Barbaro, M. [ENEA, Centro Ricerche `Ezio Clementel`, Bologna (Italy). Dipt. Innovazione

1997-11-01

A numerical method is described which generates an orthogonal curvilinear mesh, subject to the constraint that mesh lines are matched to all boundaries of a closed, simply connected two-dimensional region of arbitrary shape. The method is based on the solution, by an iterative finite-difference technique, of an elliptic differential system of equations for the Cartesian coordinates of the orthogonal grid nodes. The interior grid distribution is controlled by a technique which ensures that coordinate lines can be concentrated as desired. Examples of orthogonal meshes inscribed in various geometrical figures are included.

Integration of Geographical Information Systems and Geophysical Applications with Distributed Computing Technologies.

Science.gov (United States)

Pierce, M. E.; Aktas, M. S.; Aydin, G.; Fox, G. C.; Gadgil, H.; Sayar, A.

2005-12-01

We examine the application of Web Service Architectures and Grid-based distributed computing technologies to geophysics and geo-informatics. We are particularly interested in the integration of Geographical Information System (GIS) services with distributed data mining applications. GIS services provide the general purpose framework for building archival data services, real time streaming data services, and map-based visualization services that may be integrated with data mining and other applications through the use of distributed messaging systems and Web Service orchestration tools. Building upon on our previous work in these areas, we present our current research efforts. These include fundamental investigations into increasing XML-based Web service performance, supporting real time data streams, and integrating GIS mapping tools with audio/video collaboration systems for shared display and annotation.

Positive identity entry control system with geographically distributed portals and enrollment stations

International Nuclear Information System (INIS)

McIntire, J.M.

1985-01-01

A positive identity entry control system using distributed processing to allow reliable geographically separated portals and enrollment stations has been installed and is fully operational at a large area DOE site. Identity verification requires a credential, a memorized number and measurement of a physical characteristic of the user. Additionally, all portal activity is monitored by guards. The portal system is dual redundant such that no single point failure will shut down operations. Each portal site maintains its own subset of the master data base so off-site failure of the central data base manager or its communication links will not significantly affect local portal activity. The system is suitable for installations with large populations requiring access control at several remote sites scattered over a large area

Patterns of horse-rider coordination during endurance race: a dynamical system approach.

Directory of Open Access Journals (Sweden)

Sylvain Viry

Full Text Available In riding, most biomechanical studies have focused on the description of the horse locomotion in unridden condition. In this study, we draw the prospect of how the basic principles established in inter-personal coordination by the theory of Coordination Dynamics may provide a conceptual and methodological framework for understanding the horse-rider coupling. The recent development of mobile technologies allows combined horse and rider recordings during long lasting natural events such as endurance races. Six international horse-rider dyads were thus recorded during a 120 km race by using two tri-axial accelerometers placed on the horses and riders, respectively. The analysis concentrated on their combined vertical displacements. The obtained shapes and angles of Lissajous plots together with values of relative phase between horse and rider displacements at lower reversal point allowed us to characterize four coordination patterns, reflecting the use of two riding techniques per horse's gait (trot and canter. The present study shows that the concepts, methods and tools of self-organizing dynamic system approach offer new directions for understanding horse-rider coordination. The identification of the horse-rider coupling patterns constitutes a firm basis to further study the coalition of multiple constraints that determine their emergence and their dynamics in endurance race.

Analysis of Large Flexible Body Deformation in Multibody Systems Using Absolute Coordinates

Energy Technology Data Exchange (ETDEWEB)

Dombrowski, Stefan von [Institute of Robotics and Mechatronics, German Aerospace Center (DLR) (Germany)], E-mail: stefan.von.dombrowski@dlr.de

2002-11-15

To consider large deformation problems in multibody system simulations a finite element approach, called absolute nodal coordinate.formulation,has been proposed. In this formulation absolute nodal coordinates and their material derivatives are applied to represent both deformation and rigid body motion. The choice of nodal variables allows a fully nonlinear representation of rigid body motion and can provide the exact rigid body inertia in the case of large rotations. The methodology is especially suited for but not limited to modeling of beams, cables and shells in multibody dynamics.This paper summarizes the absolute nodal coordinate formulation for a 3D Euler-Bernoulli beam model, in particular the definition of nodal variables, corresponding generalized elastic and inertia forces and equations of motion. The element stiffness matrix is a nonlinear function of the nodal variables even in the case of linearized strain/displacement relations. Nonlinear strain/displacement relations can be calculated from the global displacements using quadrature formulae.Computational examples are given which demonstrate the capabilities of the applied methodology. Consequences of the choice of shape.functions on the representation of internal forces are discussed. Linearized strain/displacement modeling is compared to the nonlinear approach and significant advantages of the latter, when using the absolute nodal coordinate formulation, are outlined.

Analysis of Large Flexible Body Deformation in Multibody Systems Using Absolute Coordinates

International Nuclear Information System (INIS)

Dombrowski, Stefan von

2002-01-01

To consider large deformation problems in multibody system simulations a finite element approach, called absolute nodal coordinate.formulation,has been proposed. In this formulation absolute nodal coordinates and their material derivatives are applied to represent both deformation and rigid body motion. The choice of nodal variables allows a fully nonlinear representation of rigid body motion and can provide the exact rigid body inertia in the case of large rotations. The methodology is especially suited for but not limited to modeling of beams, cables and shells in multibody dynamics.This paper summarizes the absolute nodal coordinate formulation for a 3D Euler-Bernoulli beam model, in particular the definition of nodal variables, corresponding generalized elastic and inertia forces and equations of motion. The element stiffness matrix is a nonlinear function of the nodal variables even in the case of linearized strain/displacement relations. Nonlinear strain/displacement relations can be calculated from the global displacements using quadrature formulae.Computational examples are given which demonstrate the capabilities of the applied methodology. Consequences of the choice of shape.functions on the representation of internal forces are discussed. Linearized strain/displacement modeling is compared to the nonlinear approach and significant advantages of the latter, when using the absolute nodal coordinate formulation, are outlined

Columbia River Coordinated Information System (CIS); Data Catalog, 1992 Technical Report.

Energy Technology Data Exchange (ETDEWEB)

O' Connor, Dick (Washington Department of Fisheries, Olympia, WA); Allen, Stan; Reece, Doug (Idaho Department of Fish and Game, Boise, ID)

1993-05-01

The Columbia River Coordinated Information system (CIS) Project started in 1989 to address regional data sharing. Coordinated exchange and dissemination of any data must begin with dissemination of information about those data, such as: what is available; where the data are stored; what form they exist in; who to contact for further information or access to these data. In Phase II of this Project (1991), a Data Catalog describing the contents of regional datasets and less formal data collections useful for system monitoring and evaluation projects was built to improve awareness of their existence. Formal datasets are described in a `Dataset Directory,` while collections of data are Used to those that collect such information in the `Data Item Directory.` The Data Catalog will serve regional workers as a useful reference which centralizes the institutional knowledge of many data contacts into a single source. Recommendations for improvement of the Catalog during Phase III of this Project include addressing gaps in coverage, establishing an annual maintenance schedule, and loading the contents into a PC-based electronic database for easier searching and cross-referencing.

Attitude coordination of multi-HUG formation based on multibody system theory

Science.gov (United States)

Xue, Dong-yang; Wu, Zhi-liang; Qi, Er-mai; Wang, Yan-hui; Wang, Shu-xin

2017-04-01

Application of multiple hybrid underwater gliders (HUGs) is a promising method for large scale, long-term ocean survey. Attitude coordination has become a requisite for task execution of multi-HUG formation. In this paper, a multibody model is presented for attitude coordination among agents in the HUG formation. The HUG formation is regarded as a multi-rigid body system. The interaction between agents in the formation is described by artificial potential field (APF) approach. Attitude control torque is composed of a conservative torque generated by orientation potential field and a dissipative term related with angular velocity. Dynamic modeling of the multibody system is presented to analyze the dynamic process of the HUG formation. Numerical calculation is carried out to simulate attitude synchronization with two kinds of formation topologies. Results show that attitude synchronization can be fulfilled based on the multibody method described in this paper. It is also indicated that different topologies affect attitude control quality with respect to energy consumption and adjusting time. Low level topology should be adopted during formation control scheme design to achieve a better control effect.

Comparison of the precision of two standardized co-ordinate systems for the quantitation of brain anatomy: preliminary results.

Science.gov (United States)

Sandor, T; Tieman, J; Ong, H T; Moss, M B; Jolesz, F; Albert, M

1994-10-01

We assessed reproducible definition of two standardized co-ordinate systems for intersubject analysis of brain images. The baselines in the two co-ordinate systems were a modification of the canthomeatal (mCM) line and the anterior-posterior commissural (AC-PC) line. Axial spin-echo MR images of four subjects at 1.5T were used. Operator error was computed from the replicate analyses of two operators. The mCM line was determined by the lens of the eye and the internal auditory canal, and the AC-PC line was determined by the intersection of AC and PC with the interhemispheric fissure. Reproducibility of the mCM markers (SD = 0.59 mm) did not differ significantly from that of the AC-PC line (SD = 0.68 mm). The measurement error of the angle of the baseline (delta alpha), however, was more than 7 times as large for the AC-PC line as for the mCM line. An additional error affecting the rostrocaudal rotation of the co-ordinate systems, attributable to the distance between the anatomic markers, was 2.1 and 3.6 degrees (3 mm and 5 mm slice thickness) for the mCM co-ordinate system and 8.2 and 11.0 degrees (3 mm and 5 mm slice thickness) for the AC-PC system. The AC-PC line based co-ordinate system is therefore, less reproducible than the mCM line based system. This could be improved if a combination of axial and sagittal images were used for the definition of the AC-PC line.

Gulf-Wide Information System, Environmental Sensitivity Index Swamps, Geographic NAD83, LDWF (2001) [esi_swamp_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains Environmental Sensitivity Index (ESI) swamps data of coastal Louisiana. The ESI is a classification and ranking system, which characterizes...

Gulf-Wide Information System, Environmental Sensitivity Index Salinity, Geographic NAD83, LDWF (2001) [esi_salinity_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains Environmental Sensitivity Index (ESI) salinity data of coastal Louisiana. The ESI is a classification and ranking system, which characterizes...

Gulf-Wide Information System, Environmental Sensitivity Index Seagrass, Geographic NAD83, LDWF (2001) [esi_seagrass_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains Environmental Sensitivity Index (ESI) seagrass data of coastal Louisiana. The ESI is a classification and ranking system, which characterizes...

On coordinates and coordinate transformation in Einstein's theory of gravitation

International Nuclear Information System (INIS)

Chou Peiyuan

1983-01-01

This investigation is a further exposition of the significance of coordinates and their transformation in Einstein's theory of gravitation. The author considers the static axisymmetric field as an example, starts with its metric in the cylindrical coordinates, transforms this metric and the field equations into the Weyl-Levi-Civita system of coordinates, and supplements them with the harmonic condition. Both of the field equations and the harmonic condition are then transformed back to the original Cartesian system. Solutions for the static fields of an infinite plane with uniform surface density and an infinite rod with uniform linear density of matter, and of a body with spherical symmetry, are obtained again to show the necessity of the harmonic condition in their solutions. The fact that under the harmonic condition the solutions of the field equations for these problems contain their corresponding Newtonian potentials as approximations, is a strong support to the argument that the harmonic condition should be a physical supplement to Einstein's theory of gravitation. (Auth.)

Applications of geographic information system and expert system for urban runoff and water quality management

Energy Technology Data Exchange (ETDEWEB)

Lee, Beum-Hee [Pai Chai University, Taejeon(Korea)

2001-06-30

It is very important to select appropriate methods of collecting, predicting, and analyzing information for the development of urban water resources and the prevention of disasters. Thus, in this study an accurate data generation method is developed using Geographic Information System (GIS) and Remote Sensing (RS). The methods of development and application of an expert system are suggested to solve more efficiently the problems of water resources and quality induced by the rapid urbanization. The time-varying data in a large region, the An-Yang Cheon watershed, were reasonably obtained by the application of the GIS using ARC/INFO and RS data. The ESPE (Expert System for Parameter Estimation), an expert system is developed using the CLIPS 6.0. The simulated results showed agreement with the measured data globally. These methods are expected to efficiently simulate the runoff and water quality in the rapidly varying urban area. (author). 10 refs., 4 tabs., 10 figs.

Development Trends of Cartography and Geographic Information Engineering

Directory of Open Access Journals (Sweden)

WANG Jiayao

2010-04-01

Full Text Available Aimed at the problems of cartography and geographic information engineering and increasing demands of national and military infomationization construction, the paper proposes six hotspots on the research of cartography and geographic information engineering for the future on the foundation of analyzing the development track of cartology, which are heterogeneous geospatial data assimilation, transferring from emphasizing geography infor-mation gaining to user-oriented geographic information deep processing, web or grid geographic information service. intelligent spatial data generalization. integration of GIS and VGE. cartography and geographic information engineering theory system with multi-mode(Map,.GlS..VGE spatial-temporal integrated cognition as the core. And discusses the necessity ,existing groundwork and research contents on studying these hotspots.

Coordinated Secondary Control for Balanced Discharge Rate of Energy Storage System in Islanded Microgrids

DEFF Research Database (Denmark)

Guan, Yajuan; Guerrero, Josep M.; Quintero, Juan Carlos Vasquez

2015-01-01

current and unintentional outage of DGs. Thus, the stability and reliability of islanded MG can be improved. The eigenvalues and root locus with the proposed controller are presented to design the parameters as well as analyzing the system stability. Simulation results based on Matlab......A coordinated secondary control based on a novel autonomous currents sharing control strategy for balanced discharge rate of energy storage systems in islanded microgrid (MG) is proposed in this paper. The coordinated secondary controller is able to regulate the output power of distributed...... generating (DG) systems according to their state-of-charge by adjusting the virtual resistances of their voltage controlled inverters. This controller can not only provide the faster response and accurate output current sharing control, but also avoid the potential operation failure resulting from the over...

Correlation between three color coordinates of human teeth

Science.gov (United States)

Lee, Yong-Keun

2014-11-01

The objective was to determine whether there were significant correlations in the three color coordinates within each of two color coordinate systems, such as the Commission Internationale de l'Eclairage (CIE) L*a*b* system, and the lightness, chroma, and hue angle system, of human vital teeth. The color of six maxillary and six mandibular anterior teeth was measured by the Shade Vision System. Pearson correlations between each pair of the color coordinates were determined (α=0.01). The influence of two color coordinates on the other color coordinate was determined with a multiple regression analysis (α=0.01). Based on correlation analyses, all the color coordinate pairs showed significant correlations except for the chroma and hue angle pair. The CIE L* was negatively correlated with the CIE a*, b*, and chroma, but positively correlated with the hue angle. The CIE a* was positively correlated with the CIE b* and chroma. Tooth color coordinates were correlated each other. Lighter teeth were less chromatic both in the CIE a* and b* coordinates. Therefore, it was postulated that the three color coordinates of human teeth were harmonized within certain color attribute ranges, and a lack of correlations in these coordinates might indicate external/internal discolorations and/or anomalies of teeth.

Implementation of cartographic symbols for planetary mapping in geographic information systems

Science.gov (United States)

Nass, A.; van Gasselt, S.; Jaumann, R.; Asche, H.

2011-09-01

The steadily growing international interest in the exploration of planets in our Solar System and many advances in the development of space-sensor technology have led to the launch of a multitude of planetary missions to Mercury, Venus, the Earth's moon, Mars and various Outer-Solar System objects, such as the Jovian and Saturnian satellites. Camera instruments carried along on these missions image surfaces in different wavelength ranges and under different viewing angles, permitting additional data to be derived, such as spectral data or digital terrain models. Such data enable researchers to explore and investigate the development of planetary surfaces by analyzing and interpreting the inventory of surface units and structures. Results of such work are commonly abstracted and represented in thematic, mostly geological and geomorphological, maps. In order to facilitate efficient collaboration among different planetary research disciplines, mapping results need to be prepared, described, managed, archived, and visualized in a uniform way. These tasks have been increasingly carried out by means of computer-based geographic information systems (GIS or GI systems) which have come to be widely employed in the field of planetary research since the last two decades. In this paper we focus on the simplification of mapping processes, putting specific emphasis on a cartographically correct visualization of planetary mapping data using GIS-based environments. We present and discuss the implementation of a set of standardized cartographic symbols for planetary mapping based on the Digital Cartographic Standard for Geologic Map Symbolization as prepared by the United States Geological Survey (USGS) for the Federal Geographic Data Committee (FGDC). Furthermore, we discuss various options to integrate this symbol catalog into generic GI systems, and more specifically into the Environmental Systems Research Institute's (ESRI) ArcGIS environment, and focus on requirements for

Using geographic information system (GIS) to determine waste ...

African Journals Online (AJOL)

lyndon

could be used as waste transfer stations in relation to location of landfill sites using Geographic. Information ... Coast, bounded to the east by the Ga East Municipal Assembly, to the west by the .... Solid Waste and the Hierarchy in Solid Waste.

The Significance of Coordination for Industrialised Building System (IBS) Precast Concrete in Construction Industry

OpenAIRE

Fitri Othman Mohd Khairul; Wan Muhammad Wan Mohd Nurdden; Abd Hadi Nurulhudaya; Azman Mohd Azrai

2017-01-01

IBS precast concrete is construction system which is meant to improve the conventional construction process. However IBS precast concrete projects are suffering from serious problems such as cost overrun, delays and less quality of the end product. The absence of coordination is perceived as the reason for this issue. The purpose of this paper is to review the significance of coordination for IBS precast concrete in the construction industry. It if found that the fragmentation which occurs in...

Reliability of a coordinate system based on anatomical landmarks of the maxillofacial skeleton. An evaluation method for three-dimensional images obtained by cone-beam computed tomography

International Nuclear Information System (INIS)

Kimura, Momoko; Nawa, Hiroyuki; Yoshida, Kazuhito; Muramatsu, Atsushi; Fuyamada, Mariko; Goto, Shigemi; Ariji, Eiichiro; Tokumori, Kenji; Katsumata, Akitoshi

2009-01-01

We propose a method for evaluating the reliability of a coordinate system based on maxillofacial skeletal landmarks and use it to assess two coordinate systems. Scatter plots and 95% confidence ellipses of an objective landmark were defined as an index for demonstrating the stability of the coordinate system. A head phantom was positioned horizontally in reference to the Frankfurt horizontal and occlusal planes and subsequently scanned once in each position using cone-beam computed tomography. On the three-dimensional images created with a volume-rendering procedure, six dentists twice set two different coordinate systems: coordinate system 1 was defined by the nasion, sella, and basion, and coordinate system 2 was based on the left orbitale, bilateral porions, and basion. The menton was assigned as an objective landmark. The scatter plot and 95% ellipse of the menton indicated the high-level reliability of coordinate system 2. The patterns with the two coordinate systems were similar between data obtained in different head positions. The method presented here may be effective for evaluating the reliability (reproducibility) of coordinate systems based on skeletal landmarks. (author)

Mathematical and numerical analysis of systems of compressible hydrodynamics and photonics with polar coordinates

International Nuclear Information System (INIS)

Meltz, Bertrand

2015-01-01

This thesis deals with the mathematical and numerical analysis of the systems of compressible hydrodynamics and radiative transfer. More precisely, we study the derivation of numerical methods with 2D polar coordinates (one for the radius, one for the angle) where equations are discretized on regular polar grids. On one hand, these methods are well-suited for the simulation of flows with polar symmetries since they preserve these symmetries by construction. On the other hand, such coordinates systems introduce geometrical singularities as well as geometrical source terms which must be carefully treated. The first part of this document is devoted to the study of hydrodynamics equations, or Euler equations. We propose a new class of arbitrary high-order numerical schemes in both space and time and rely on directional splitting methods for the resolution of 2D equations. Each sub-system is solved using a Lagrange+Remap solver. We study the influence of the r=0 geometrical singularities of the cylindrical and spherical coordinates systems on the precision of the 2D numerical solutions. The second part of this document is devoted to the study of radiative transfer equations. In these equations, the unknowns depend on a large number of variables and a stiff source term is involved. The main difficulty consists in capturing the correct asymptotic behavior on coarse grids. We first construct a class of models where the radiative intensity is projected on a truncated spherical harmonics basis in order to lower the number of mathematical dimensions. Then we propose an Asymptotic Preserving scheme built in polar coordinates and we show that the scheme capture the correct diffusion limit in the radial direction as well as in the polar direction. (author) [fr

Quantifying forest fragmentation using Geographic Information Systems and Forest Inventory and Analysis plot data

Science.gov (United States)

Dacia M. Meneguzzo; Mark H. Hansen

2009-01-01

Fragmentation metrics provide a means of quantifying and describing forest fragmentation. The most common method of calculating these metrics is through the use of Geographic Information System software to analyze raster data, such as a satellite or aerial image of the study area; however, the spatial resolution of the imagery has a significant impact on the results....

Integrative real-time geographic visualization of energy resources

International Nuclear Information System (INIS)

Sorokine, A.; Shankar, M.; Stovall, J.; Bhaduri, B.; King, T.; Fernandez, S.; Datar, N.; Omitaomu, O.

2009-01-01

'Full text:' Several models forecast that climatic changes will increase the frequency of disastrous events like droughts, hurricanes, and snow storms. Responding to these events and also to power outages caused by system errors such as the 2003 North American blackout require an interconnect-wide real-time monitoring system for various energy resources. Such a system should be capable of providing situational awareness to its users in the government and energy utilities by dynamically visualizing the status of the elements of the energy grid infrastructure and supply chain in geographic contexts. We demonstrate an approach that relies on Google Earth and similar standard-based platforms as client-side geographic viewers with a data-dependent server component. The users of the system can view status information in spatial and temporal contexts. These data can be integrated with a wide range of geographic sources including all standard Google Earth layers and a large number of energy and environmental data feeds. In addition, we show a real-time spatio-temporal data sharing capability across the users of the system, novel methods for visualizing dynamic network data, and a fine-grain access to very large multi-resolution geographic datasets for faster delivery of the data. The system can be extended to integrate contingency analysis results and other grid models to assess recovery and repair scenarios in the case of major disruption. (author)

Soil erosion fragility assessment using an impact model and geographic information system

OpenAIRE

Jorge,Luiz Alberto Blanco

2009-01-01

A study was taken in a 1566 ha watershed situated in the Capivara River basin, municipality of Botucatu, São Paulo State, Brazil. This environment is fragile and can be subjected to different forms of negative impacts, among them soil erosion by water. The main objective of the research was to develop a methodology for the assessment of soil erosion fragility at the various different watershed positions, using the geographic information system ILWIS version 3.3 for Windows. An impact model wa...

[Spatial distribution of occupational disease prevalence in Guangzhou and Foshan city by geographic information system].

Science.gov (United States)

Tan, Q; Tu, H W; Gu, C H; Li, X D; Li, R Z; Wang, M; Chen, S G; Cheng, Y J; Liu, Y M

2017-11-20

Objective: To explore the occupational disease spatial distribution characteristics in Guangzhou and Foshan city in 2006-2013 with Geographic Information System and to provide evidence for making control strategy. Methods: The data on occupational disease diagnosis in Guangzhou and Foshan city from 2006 through 2013 were collected and linked to the digital map at administrative county level with Arc GIS12.0 software for spatial analysis. Results: The maps of occupational disease and Moran's spatial autocor-relation analysis showed that the spatial aggregation existed in Shunde and Nanhai region with Moran's index 1.727, -0.003. Local Moran's I spatial autocorrelation analysis pointed out the "positive high incidence re-gion" and the "negative high incidence region" during 2006~2013. Trend analysis showed that the diagnosis case increased slightly then declined from west to east, increase obviously from north to south, declined from? southwest to northeast, high in the middle and low on both sides in northwest-southeast direction. Conclusions: The occupational disease is obviously geographical distribution in Guangzhou and Foshan city. The corresponding prevention measures should be made according to the geographical distribution.

[Coupling coordination evaluation method between eco-environment quality and economic development level in contiguous special poverty-stricken areas of China].

Science.gov (United States)

Wang, Yan-hui; Li, Jing-yi

2015-05-01

It is one of the important strategies in the new period of national poverty alleviation and development to maintain the basic balance between the ecological environment and economic development, and to promote the coordinated sustainable development of economy and ecological environment. Taking six contiguous special poverty-stricken areas as the study areas, a coupling coordination evaluation method between eco-environment quality and economic development level in contiguous special poverty-stricken areas was explored in this paper. The region' s ecological poverty index system was proposed based on the natural attribute of ecological environment, and the ecological environment quality evaluation method was built up by using AHP weighting method, followed by the design of the coupling coordination evaluation method between the ecological environment indices and the county economic poverty comprehensive indices. The coupling coordination degrees were calculated and their spatial representation differentiations were analyzed respectively at district, province, city, and county scales. Results showed that approximately half of the counties in the study areas achieved the harmoniously coordinated development. However, the ecological environmental quality and the economic development in most counties could not be synchronized, where mountains, rivers and other geographic features existed roughly as a dividing line of the coordinated development types. The phenomena of dislocation between the ecological environment and economic development in state-level poor counties were more serious than those of local poor counties.

A Geographic Information System approach to modeling nutrient and sediment transport

Energy Technology Data Exchange (ETDEWEB)

Levine, D.A. [Automated Sciences Group, Inc., Oak Ridge, TN (United States); Hunsaker, C.T.; Beauchamp, J.J. [Oak Ridge National Lab., TN (United States); Timmins, S.P. [Analysas Corp., Oak Ridge, TN (United States)

1993-02-01

The objective of this study was to develop a water quality model to quantify nonpoint-source (NPS) pollution that uses a geographic information system (GIS) to link statistical modeling of nutrient and sediment delivery with the spatial arrangement of the parameters that drive the model. The model predicts annual nutrient and sediment loading and was developed, calibrated, and tested on 12 watersheds within the Lake Ray Roberts drainage basin in north Texas. Three physiographic regions are represented by these watersheds, and model success, as measured by the accuracy of load estimates, was compared within and across these regions.

Possibility of extending space-time coordinates

International Nuclear Information System (INIS)

Wang Yongcheng.

1993-11-01

It has been shown that one coordinate system can describe a whole space-time region except some supersurfaces on which there are coordinate singularities. The conditions of extending a coordinate from real field to complex field are studied. It has been shown that many-valued coordinate transformations may help us to extend space-time regions and many-valued metric functions may make one coordinate region to describe more than one space-time regions. (author). 11 refs

Coordination theory and collaboration technology

CERN Document Server

Olson, Gary M; Smith, John B

2001-01-01

The National Science Foundation funded the first Coordination Theory and Collaboration Technology initiative to look at systems that support collaborations in business and elsewhere. This book explores the global revolution in human interconnectedness. It will discuss the various collaborative workgroups and their use in technology. The initiative focuses on processes of coordination and cooperation among autonomous units in human systems, in computer and communication systems, and in hybrid organizations of both systems. This initiative is motivated by three scientific issues which have been

Self-triggered coordination with ternary controllers

NARCIS (Netherlands)

De Persis, Claudio; Frasca, Paolo

2012-01-01

This paper regards coordination of networked systems with ternary controllers. We develop a hybrid coordination system which implements a self-triggered communication policy, based on polling the neighbors upon need. We prove that the proposed scheme ensures finite-time convergence to a neighborhood

Towards the observation of Territorial Energy Systems - a geographical design approach for energy territorialisation

International Nuclear Information System (INIS)

Flety, Yann

2014-01-01

Having an effect on a system calls for a thorough knowledge of it. The main goal of this research is to provide a general framework for the interpretation of geographic information, as well as a methodological framework to understand the interrelations between territory and energy in the context of a territorial observatory. A literature review of energy planning on the one hand and spatial planning on the other reveals similar developments in the two fields, in particular in terms of decentralisation and environmental concerns. The change of geographical scale chosen for the analysis brings new possibilities for public intervention. In this context, therefore, local authorities have a key role to play in implementing energy policy goals in their planning practices. They need analysis and prospective studies, as well as basic knowledge to carry out territorial energy planning. Indeed, the socio-spatial functions (living, travelling, working, etc.) are themselves at the root of spatial layout, urban forms and settlement structures. Those functions cannot be disassociated from questions of land use and energy. So, to understand energy which is vital, ubiquitous, and responsible for the organisation of territory, a systemic approach is proposed: the Territorial Energy System. It illustrates the importance of the interactions between a territory and its energy system, and more precisely, the interdependence between energy processes and territorial ones. We propose a design approach in the context of an observatory, and more precisely conceptual models, to analyse the territory-energy interrelations, especially with a focus on semantic dimensions. This approach combines three elements: a meta-model, a light and pre-consensus domain ontology, and individual conceptual data models for each indicator. An original indicator is then used for a first ontology population: the territorial energy label. Characterising the interrelations between territory and energy is non

DEVELOPMENT OF A CARBON MANAGEMENT GEOGRAPHIC INFORMATION SYSTEM (GIS) FOR THE UNITED STATES

Energy Technology Data Exchange (ETDEWEB)

Howard J. Herzog

2004-03-01

The Lab for Energy and Environment (LFEE) at MIT is developing a Geographic Information System (GIS) for carbon management. The GIS will store, integrate, and manipulate information relating to the components of carbon management systems. Additionally, the GIS can be used to interpret and analyze the effect of developing these systems. In the first year of this three year project, we focused on two tasks: (1) specifying the system design--defining in detail the GIS data requirements, the types of analyses that can be conducted, and the forms of output we will produce, as well as designing the computer architecture of the GIS and (2) creating the ''core'' datasets--identifying data sources and converting them into a form accessible by the GIS.

Use of geographic information systems for applications on gas pipeline rights-of-way

Energy Technology Data Exchange (ETDEWEB)

Sydelko, P.J.; Wilkey, P.L.

1992-12-01

Geographic information system (GIS) applications for the siting and monitoring of gas pipeline rights-of-way (ROWS) were developed for areas near Rio Vista, California. The data layers developed for this project represent geographic features, such as landcover, elevation, aspect, slope, soils, hydrography, transportation, endangered species, wetlands, and public line surveys. A GIS was used to develop and store spatial data from several sources; to manipulate spatial data to evaluate environmental and engineering issues associated with the siting, permitting, construction, maintenance, and monitoring of gas pipeline ROWS; and to graphically display analysis results. Examples of these applications include (1) determination of environmentally sensitive areas, such as endangered species habitat, wetlands, and areas of highly erosive soils; (2) evaluation of engineering constraints, including shallow depth to bedrock, major hydrographic features, and shallow water table; (3) classification of satellite imagery for landuse/landcover that will affect ROWS; and (4) identification of alternative ROW corridors that avoid environmentally sensitive areas or areas with severe engineering constraints.

Gulf-Wide Information System, Environmental Sensitivity Index Database, Geographic NAD83, LDWF (2001) [esi_index_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains polygons representing the boundaries of the USGS 1:100,000 topographic maps in the study area of the Louisiana Gulf-Wide Information System...

A Lagrangian cylindrical coordinate system for characterizing dynamic surface geometry of tubular anatomic structures.

Science.gov (United States)

Lundh, Torbjörn; Suh, Ga-Young; DiGiacomo, Phillip; Cheng, Christopher

2018-03-03

Vascular morphology characterization is useful for disease diagnosis, risk stratification, treatment planning, and prediction of treatment durability. To quantify the dynamic surface geometry of tubular-shaped anatomic structures, we propose a simple, rigorous Lagrangian cylindrical coordinate system to monitor well-defined surface points. Specifically, the proposed system enables quantification of surface curvature and cross-sectional eccentricity. Using idealized software phantom examples, we validate the method's ability to accurately quantify longitudinal and circumferential surface curvature, as well as eccentricity and orientation of eccentricity. We then apply the method to several medical imaging data sets of human vascular structures to exemplify the utility of this coordinate system for analyzing morphology and dynamic geometric changes in blood vessels throughout the body. Graphical abstract Pointwise longitudinal curvature of a thoracic aortic endograft surface for systole and diastole, with their absolute difference.

75 FR 42376 - Proposed Information Collection; Comment Request; NTIA/FCC Web-based Frequency Coordination System

Science.gov (United States)

2010-07-21

... Information Collection; Comment Request; NTIA/FCC Web- based Frequency Coordination System AGENCY: National.... Abstract The National Telecommunications and Information Administration (NTIA) hosts a Web-based system...) bands that are shared on a co-primary basis by federal and non-federal users. The Web-based system...

Geographic information systems, remote sensing, and spatial analysis activities in Texas, 2008-09

Science.gov (United States)

,

2009-01-01

Geographic information system (GIS) technology has become an important tool for scientific investigation, resource management, and environmental planning. A GIS is a computer-aided system capable of collecting, storing, analyzing, and displaying spatially referenced digital data. GIS technology is useful for analyzing a wide variety of spatial data. Remote sensing involves collecting remotely sensed data, such as satellite imagery, aerial photography, or radar images, and analyzing the data to gather information or investigate trends about the environment or the Earth's surface. Spatial analysis combines remotely sensed, thematic, statistical, quantitative, and geographical data through overlay, modeling, and other analytical techniques to investigate specific research questions. It is the combination of data formats and analysis techniques that has made GIS an essential tool in scientific investigations. This fact sheet presents information about the technical capabilities and project activities of the U.S. Geological Survey (USGS) Texas Water Science Center (TWSC) GIS Workgroup during 2008 and 2009. After a summary of GIS Workgroup capabilities, brief descriptions of activities by project at the local and national levels are presented. Projects are grouped by the fiscal year (October-September 2008 or 2009) the project ends and include overviews, project images, and Internet links to additional project information and related publications or articles.

The development of a natural language interface to a geographical information system

Science.gov (United States)

Toledo, Sue Walker; Davis, Bruce

1993-01-01

This paper will discuss a two and a half year long project undertaken to develop an English-language interface for the geographical information system GRASS. The work was carried out for NASA by a small business, Netrologic, based in San Diego, California, under Phase 1 and 2 Small Business Innovative Research contracts. We consider here the potential value of this system whose current functionality addresses numerical, categorical and boolean raster layers and includes the display of point sets defined by constraints on one or more layers, answers yes/no and numerical questions, and creates statistical reports. It also handles complex queries and lexical ambiguities, and allows temporarily switching to UNIX or GRASS.

Automatic coordination of protection devices in distribution system

International Nuclear Information System (INIS)

Comassetto, L.; Bernardon, D.P.; Canha, L.N.; Abaide, A.R.

2008-01-01

Among the several components of distribution systems, protection devices present a fundamental importance, since they aim at keeping the physical integrity not only of the system equipment, but also of the electricians' team and the population in general. The existing tools today in the market that carry out the making of protection studies basically draw curves, and need direct user's interference for the protection devices adjustment and coordination analyses of selectivity, being susceptible to the user's mistakes and not always considering the best technical and economical application. In Brazil, the correct application of the protection devices demand a high amount of time, being extremely laborious due to the great number of devices (around 200 devices), besides the very dynamic behaviour of distribution networks and the need for constant system expansion. This article presents a computational tool developed with the objective of automatically determining the adjustments of all protection devices in the distribution networks to obtain the best technical application, optimizing its performance and making easier protection studies. (author)

Direction-sensitive smart monitoring of structures using heterogeneous smartphone sensor data and coordinate system transformation

Science.gov (United States)

Ozer, Ekin; Feng, Maria Q.

2017-04-01

Mobile, heterogeneous, and smart sensor networks produce pervasive structural health monitoring (SHM) information. With various embedded sensors, smartphones have emerged to innovate SHM by empowering citizens to serve as sensors. By default, smartphones meet the fundamental smart sensor criteria, thanks to the built-in processor, memory, wireless communication units and mobile operating system. SHM using smartphones, however, faces technical challenges due to citizen-induced uncertainties, undesired sensor-structure integration, and lack of control over the sensing platform. Previously, the authors presented successful applications of smartphone accelerometers for structural vibration measurement and proposed a monitoring framework under citizen-induced spatiotemporal uncertainties. This study aims at extending the capabilities of smartphone-based SHM with a special focus on the lack of control over the sensor (i.e., the phone) positioning by citizens resulting in unknown sensor orientations. Using smartphone gyroscope, accelerometer, and magnetometer; instantaneous sensor orientation can be obtained with respect to gravitational and magnetic north directions. Using these sensor data, mobile operating system frameworks return processed features such as attitude and heading that can be used to correct misaligned sensor signals. For this purpose, a coordinate transformation procedure is proposed and illustrated on a two-story laboratory structural model and real-scale bridges with various sensor positioning examples. The proposed method corrects the sensor signals by tracking their orientations and improves measurement accuracy. Moreover, knowing structure’s coordinate system a priori, even the data from arbitrarily positioned sensors can automatically be transformed to the structural coordinates. In addition, this paper also touches some secondary mobile and heterogeneous data issues including imperfect sampling and geolocation services. The coordinate system

Application of geographic information system as a tool for environmental monitoring in support of a nuclear installation

International Nuclear Information System (INIS)

Ribeiro, Glaucielen F.; Silva, Nivaldo C.; Oliveira, Alexandre P.; Ferrari, Talita N.; Dias, Danila C.; Alberti, Heber Luiz C.

2013-01-01

The increasing advance of technologies of geographic information systems (GIS), computer processing techniques, and the growing volume of spatial data available and demand for automated systems to aid decision making are motivating enterprises and research institutions to make use of GIS technologies and Intelligent Computing. In this context, the Laboratory of Pocos de Caldas (LAPOC) has a large collection of data that are generated from environmental monitoring of a nuclear installation. These data can be organized through a georeferenced database in order to improve the quality of information, in addition to generating new interpretations from data and existing products. Therefore, this study aims to generate a database that is capable of gathering existing data into a Geographic Information System (GIS) platform using ArcGIS 9.3.1 software which has a model of relational database that stores geographic data in Geodatabase format. The steps of this process start with the organization of spatial and descriptive data, moving through logic and conceptual modeling and finally, implementation of the database into the GIS environment. The data modeling through the Geodatabase was adequate since its structure enabled the data work to be done in an efficient manner in addition to allowing centralized management of such data. This demonstrates the great potential of the tool and improvement of the quality and availability of information. (author)

Artificial neural network controller for automatic ship berthing using head-up coordinate system

Directory of Open Access Journals (Sweden)

Nam-Kyun Im

2018-05-01

Full Text Available The Artificial Neural Network (ANN model has been known as one of the most effective theories for automatic ship berthing, as it has learning ability and mimics the actions of the human brain when performing the stages of ship berthing. However, existing ANN controllers can only bring a ship into a berth in a certain port, where the inputs of the ANN are the same as those of the teaching data. This means that those ANN controllers must be retrained when the ship arrives to a new port, which is time-consuming and costly. In this research, by using the head-up coordinate system, which includes the relative bearing and distance from the ship to the berth, a novel ANN controller is proposed to automatically control the ship into the berth in different ports without retraining the ANN structure. Numerical simulations were performed to verify the effectiveness of the proposed controller. First, teaching data were created in the original port to train the neural network; then, the controller was tested for automatic berthing in other ports, where the initial conditions of the inputs in the head-up coordinate system were similar to those of the teaching data in the original port. The results showed that the proposed controller has good performance for ship berthing in ports. Keywords: Automatic ship berthing, ANN controller, Head-up coordinate system, Low speed, Relative bearing

Increase in impaired motor coordination in six-year-old German children between 1990 and 2007

NARCIS (Netherlands)

Seelaender, J.; Fidler, V.; Hadders-Algra, M.

Aim To evaluate changes in prevalence of impaired motor coordination among 6-year-olds of a geographically defined area in Germany between the years 1990 and 2007. Methods Data from the obligatory school entrance examinations in the German state of North Rhine Westphalia between the years 1990 and

Mathematical analysis and coordinated current allocation control in battery power module systems

Science.gov (United States)

Han, Weiji; Zhang, Liang

2017-12-01

As the major energy storage device and power supply source in numerous energy applications, such as solar panels, wind plants, and electric vehicles, battery systems often face the issue of charge imbalance among battery cells/modules, which can accelerate battery degradation, cause more energy loss, and even incur fire hazard. To tackle this issue, various circuit designs have been developed to enable charge equalization among battery cells/modules. Recently, the battery power module (BPM) design has emerged to be one of the promising solutions for its capability of independent control of individual battery cells/modules. In this paper, we propose a new current allocation method based on charging/discharging space (CDS) for performance control in BPM systems. Based on the proposed method, the properties of CDS-based current allocation with constant parameters are analyzed. Then, real-time external total power requirement is taken into account and an algorithm is developed for coordinated system performance control. By choosing appropriate control parameters, the desired system performance can be achieved by coordinating the module charge balance and total power efficiency. Besides, the proposed algorithm has complete analytical solutions, and thus is very computationally efficient. Finally, the efficacy of the proposed algorithm is demonstrated using simulations.

Experimental study on performance verification tests for coordinate measuring systems with optical distance sensors

Science.gov (United States)

Carmignato, Simone

2009-01-01

Optical sensors are increasingly used for dimensional and geometrical metrology. However, the lack of international standards for testing optical coordinate measuring systems is currently limiting the traceability of measurements and the easy comparison of different optical systems. This paper presents an experimental investigation on artefacts and procedures for testing coordinate measuring systems equipped with optical distance sensors. The work is aimed at contributing to the standardization of testing methods. The VDI/VDE 2617-6.2:2005 guideline, which is probably the most complete document available at the state of the art for testing systems with optical distance sensors, is examined with specific experiments. Results from the experiments are discussed, with particular reference to the tests used for determining the following characteristics: error of indication for size measurement, probing error and structural resolution. Particular attention is given to the use of artefacts alternative to gauge blocks for determining the error of indication for size measurement.

Land-use planning of Volyn region (Ukraine) using Geographic Information Systems (GIS) technologies

Science.gov (United States)

Strielko, Irina; Pereira, Paulo

2014-05-01

Land-use development planning is carried out in order to create a favourable environment for human life, sustainable socioeconomic and spatial development. Landscape planning is an important part of land-use development that aims to meet the fundamental principles of sustainable development. Geographic Information Systems (GIS) is a fundamental tool to make a better landscape planning at different territorial levels, providing data and maps to support decision making. The objective of this work is to create spatio-temporal, territorial and ecological model of development of Volyn region (Ukraine). It is based on existing spatial raster and vector data and includes the analysis of territory dynamics as the aspects responsible for it. A spatial analyst tool was used to zone the areas according to their environmental components and economic activity. This analysis is fundamental to define the basic parameters of sustainability of Volyn region. To carry out this analysis, we determined the demographic capacity of districts and the analysis of spatial parameters of land use. On the basis of the existing natural resources, we observed that there is a need of landscape protection and integration of more are natural areas in the Pan-European Ecological Network. Using GIS technologies to landscape planning in Volyn region, allowed us to identify, natural areas of interest, contribute to a better resource management and conflict resolution. Geographic Information Systems will help to formulate and implement landscape policies, reform the existing administrative system of Volyn region and contribute to a better sustainable development.

Rates and patterns of deforestation in the Philippines: application of geographic information system analysis

Science.gov (United States)

Dawning S. Lui; Louis R. Iverson; Sandra Brown

1993-01-01

Land-use maps for 1934 and 1988, and a 1941 road map of the Philippines were digitized into a geographic information system. These maps were then analyzed to determine the rates of deforestation and their relationship with factors such as the distance of forests to roads and forest fragmentation (measured by perimeter-to-area ratio (P/A ratio) of forest patches) for...

Research on Synchronous Coordination Development of Tourism-Economy-Environment System in Qinghai Section of Silk Road

Science.gov (United States)

Xue, Huaju

2018-01-01

Using coupling theory in physics, the paper analyzed the relationship of coordinated development of tourism-economy-environment system (abbr. TEES) in Qinghai. Results showed the comprehensive evaluation of Qinghai TEES has been improved greatly from 2000 to 2014. However, coupling degree has still been in the running-in stage and coordination degree only arrives at the primary coordination level, the development of economy and tourism has exceeded the threshold of ecological environment after 2008, and the ecological environment has become the bottleneck restricting the further improvement of coupling coordination. In the future, Qinghai must change its mode of development and focus on industrial upgrading and transformation so as to promote the harmonious and sustainable development of TEES in the Silk Road.

A methodology for landfill location using geographic information systems: a Colombian regional case

OpenAIRE

Carlos Alfonso Zafra Mejía; Franklin Andrés Mendoza Castañeda; Paula Alejandra Montoya Varela

2012-01-01

The regions’ economic growth and accelerated development have created high solid waste production rates; such waste is disposed of in many localities in places without any technical and/or environmental measures having been taken. This paper presents guidelines for locating landfills by combining geographic information systems (GIS) with analytic hierarchy process (AHP) and simple additive weighting (SAW). The methodology so developed was applied to the regional case of Tame in the Arauca dep...

A methodology for landfill location using geographic information systems: a Colombian regional case

OpenAIRE

Zafra Mejía, Carlos Alfonso; Mendoza Castañeda, Franklin Andrés; Montoya Varela, Paula Alejandra

2012-01-01

The regions' economic growth and accelerated development have created high solid waste production rates; such waste is dis-posed of in many localities in places without any technical and/or environmental measures having been taken. This paper presents guidelines for locating landfills by combining geographic information systems (GIS) with analytic hierarchy process (AHP) and simple additive weighting (SAW). The methodology so developed was applied to the regional case of Tame in the Arauca de...

Multiple regulatory systems coordinate DNA replication with cell growth in Bacillus subtilis.

Science.gov (United States)

Murray, Heath; Koh, Alan

2014-10-01

In many bacteria the rate of DNA replication is linked with cellular physiology to ensure that genome duplication is coordinated with growth. Nutrient-mediated growth rate control of DNA replication initiation has been appreciated for decades, however the mechanism(s) that connects these cell cycle activities has eluded understanding. In order to help address this fundamental question we have investigated regulation of DNA replication in the model organism Bacillus subtilis. Contrary to the prevailing view we find that changes in DnaA protein level are not sufficient to account for nutrient-mediated growth rate control of DNA replication initiation, although this regulation does require both DnaA and the endogenous replication origin. We go on to report connections between DNA replication and several essential cellular activities required for rapid bacterial growth, including respiration, central carbon metabolism, fatty acid synthesis, phospholipid synthesis, and protein synthesis. Unexpectedly, the results indicate that multiple regulatory systems are involved in coordinating DNA replication with cell physiology, with some of the regulatory systems targeting oriC while others act in a oriC-independent manner. We propose that distinct regulatory systems are utilized to control DNA replication in response to diverse physiological and chemical changes.

Knowledge-based geographic information systems (KBGIS): New analytic and data management tools

Science.gov (United States)

Albert, T.M.

1988-01-01

In its simplest form, a geographic information system (GIS) may be viewed as a data base management system in which most of the data are spatially indexed, and upon which sets of procedures operate to answer queries about spatial entities represented in the data base. Utilization of artificial intelligence (AI) techniques can enhance greatly the capabilities of a GIS, particularly in handling very large, diverse data bases involved in the earth sciences. A KBGIS has been developed by the U.S. Geological Survey which incorporates AI techniques such as learning, expert systems, new data representation, and more. The system, which will be developed further and applied, is a prototype of the next generation of GIS's, an intelligent GIS, as well as an example of a general-purpose intelligent data handling system. The paper provides a description of KBGIS and its application, as well as the AI techniques involved. ?? 1988 International Association for Mathematical Geology.

Damping Improvement of Multiple Damping Controllers by Using Optimal Coordinated Design Based on PSS and FACTS-POD in a Multi-Machine Power System

Directory of Open Access Journals (Sweden)

Ali Nasser Hussain

2016-09-01

Full Text Available The aim of this study is to present a comprehensive comparison and assessment of the damping function improvement of power system oscillation for the multiple damping controllers using the simultaneously coordinated design based on Power System Stabilizer (PSS and Flexible AC Transmission System (FACTS devices. FACTS devices can help in the enhancing the stability of the power system by adding supplementary damping controller to the control channel of the FACTS input to implement the task of Power Oscillation Damping (FACT POD controller. Simultaneous coordination can be performed in different ways. First, the dual coordinated designs between PSS and FACTS POD controller or between different FACTS POD controllers are arranged in a multiple FACTS devices without PSS. Second, the simultaneous coordination has been extended to triple coordinated design among PSS and different FACTS POD controllers. The parameters of the damping controllers have been tuned in the individual controllers and coordinated designs by using a Chaotic Particle Swarm Optimization (CPSO algorithm that optimized the given eigenvalue-based objective function. The simulation results for a multi-machine power system show that the dual coordinated design provide satisfactory damping performance over the individual control responses. Furthermore, the triple coordinated design has been shown to be more effective in damping oscillations than the dual damping controllers.

Energy Facility Siting by Means of Environmental Modelling with LANDSAT, Thematic Mapper and Geographic Information System (GIS) Data

Science.gov (United States)

1982-01-01

Currently based on ground and aerial surveys, the land cover data base of the Pennsylvania Power and Light Company is routinely used for modelling the effects of alternative generating plant and transmission line sites on the local and regional environment. The development of a satellite-based geographic information system would facilitate both the preparation of environmental impact statements by power companies and assessment of the data by the Nuclear Regulatory Commission. A cooperative project is planned to demonstrate the methodology for integrating satellite data into an existing geographic information system, d to further evaluate the ability of satellite data in modeling environmental conditions that would be applied in the preparation and assessment of environmental impact statements.

Improving Project Manufacturing Coordination

Directory of Open Access Journals (Sweden)

Korpivaara Ville

2014-09-01

Full Text Available The objective of this research is to develop firms’ project manufacturing coordination. The development will be made by centralizing the manufacturing information flows in one system. To be able to centralize information, a deep user need assessment is required. After user needs have been identified, the existing system will be developed to match these needs. The theoretical background is achieved through exploring the literature of project manufacturing, development project success factors and different frameworks and tools for development project execution. The focus of this research is rather in customer need assessment than in system’s technical expertise. To ensure the deep understanding of customer needs this study is executed by action research method. As a result of this research the information system for project manufacturing coordination was developed to respond revealed needs of the stakeholders. The new system improves the quality of the manufacturing information, eliminates waste in manufacturing coordination processes and offers a better visibility to the project manufacturing. Hence it provides a solid base for the further development of project manufacturing.

Adoption of Free Open Source Geographic Information System Solution for Health Sector in Zanzibar Tanzania

OpenAIRE

BAKAR, Abubakar D.; KIMARO, Honest C.; SULTAN, Abu Bakar MD; HAMIAR, S.

2014-01-01

The study aims at developing in-depth understanding on how Open Source Geographic Information System technology is used to provide solutions for data visualization in the health sector of Zanzibar, Tanzania. The study focuses on implementing the health visualization solutions for the purpose of bridging the gap during the transition period from proprietary software to the Free Open-Source Software using Key Indicator Data System. The developed tool facilitates data integration between the two...

A Note on the Dipole Coordinates

OpenAIRE

Kageyama, Akira; Sugiyama, Tooru; Watanabe, Kunihiko; Sato, Tetsuya

2004-01-01

A couple of orthogonal coordinates for dipole geometry are proposed for numerical simulations of plasma geophysics in the Earth's dipole magnetic field. These coordinates have proper metric profiles along field lines in contrast to the standard dipole coordinate system that is commonly used in analytical studies for dipole geometry.

Sistem Pengantaran Makanan dengan Pendayagunaan Vehicle Menggunakan Geographical Information System (GIS) dan Algoritma A Star (A*)

OpenAIRE

Lubis, Elita Sari

2016-01-01

Food delivery system is one various of geographical information systems (GIS) that can be applied through digitation process. The main case in food delivery service is the way to acquire shortest path and movement tracking of food delivery vehicle. Therefore, to accomplish the efficient food delivery system digitation process, it is needed to add facility of shortest path determination and food delivery vehicle tracking. This research uses A* shortest path algorithm to determine shortest path...

Geographical information System - Tool for the administration of the services of basic sanitation and drinkable water

International Nuclear Information System (INIS)

Villegas A, Claudia; Figueroa V, Claudia; Betancur V, Teresita

2000-01-01

The utility a Geographic Information System (GIS), is to develop urbane zone in this case, in the Jardin Municipality many elements and tools are supporting the management of service of potable water and basic sanitation, which constitute components of Territorial Ordering Plane (TOP)

Coordinated voltage control for multiple wind plants in Eastern Wyoming. Analysis, field experience and validation

Energy Technology Data Exchange (ETDEWEB)

Miller, Nicholas; MacDowell, Jason; Chmiel, Gary; Konopinski, Ryan; Gautam, Durga [GE Energy, Schenectady, NY (United States); Laughter, Grant; Hagen, Dave [PacifiCorp., Salt Lake City, UT (United States)

2012-07-01

At high levels of wind power penetration, multiple wind plants may be the predominant generation resource over large geographic areas. Thus, not only do wind plants need to provide a high level of functionality, they must coordinate properly with each other. This paper describes the analysis and field testing of wind plant voltage controllers designed to improve system voltage performance through passive coordination. The described wind power plant controls can coordinate the real and reactive power response of multiple wind turbines and thereby make the plant function as a single ''grid friendly'' power generation source. For this application, involving seven large wind plants with predominantly GE wind turbines in Eastern Wyoming, the voltage portion of the controllers were configured and tuned to allow the collective reactive power response of multiple wind plants in the region to work well together. This paper presents the results of the initial configuration and tuning study, and the results of the subsequent field tuning and testing of the modified controls. The paper also presents some comparisons of the measured field performance with the stability simulation models, which show that the available wind plant models provide accurate, high fidelity results for actual operating conditions of commercial wind power plants. (orig.)

100 Area electrical distribution fault and coordination report

International Nuclear Information System (INIS)

Webber, J.J.

1994-01-01

This report documents three-phase and line-to-ground fault values and time overcurrent coordination curves for the electrical utility distribution system located in the 100 Areas. Activities that may improve the coordination of the distribution system have also been identified. An evaluation of system coordination was performed. The results of this evaluation are listed in Appendix B. There are protective devices within the 100 Area distribution system that do not coordinate with one another throughout the Areas. There is also a mis-application of reclosing relays at the 100B Area. The impact of the mis-coordination and incorrect application of reclosing relays is that system selectivity is reduced. Equipment will still be protected against damaging currents, however more equipment will be de-energized than necessary during fault conditions. It is the opinion of the author of this report that the cases of mis-coordination listed above, and in Appendix B, do not significantly degrade the system protection system nor the reliability of the 100 Area distribution system. Therefore, immediate response to correct these problems is not recommended. However, a planned methodology, outlined in an Activity Plan, to correct these problems should be developed and implemented in the near future

A review of geographic variation and Geographic Information Systems (GIS) applications in prescription drug use research.

Science.gov (United States)

Wangia, Victoria; Shireman, Theresa I

2013-01-01

While understanding geography's role in healthcare has been an area of research for over 40 years, the application of geography-based analyses to prescription medication use is limited. The body of literature was reviewed to assess the current state of such studies to demonstrate the scale and scope of projects in order to highlight potential research opportunities. To review systematically how researchers have applied geography-based analyses to medication use data. Empiric, English language research articles were identified through PubMed and bibliographies. Original research articles were independently reviewed as to the medications or classes studied, data sources, measures of medication exposure, geographic units of analysis, geospatial measures, and statistical approaches. From 145 publications matching key search terms, forty publications met the inclusion criteria. Cardiovascular and psychotropic classes accounted for the largest proportion of studies. Prescription drug claims were the primary source, and medication exposure was frequently captured as period prevalence. Medication exposure was documented across a variety of geopolitical units such as countries, provinces, regions, states, and postal codes. Most results were descriptive and formal statistical modeling capitalizing on geospatial techniques was rare. Despite the extensive research on small area variation analysis in healthcare, there are a limited number of studies that have examined geographic variation in medication use. Clearly, there is opportunity to collaborate with geographers and GIS professionals to harness the power of GIS technologies and to strengthen future medication studies by applying more robust geospatial statistical methods. Copyright © 2013 Elsevier Inc. All rights reserved.

Improvement of Protection Coordination for a Distribution System Connected to a Microgrid using Unidirectional Fault Current Limiter

Directory of Open Access Journals (Sweden)

Mazen Abdel-Salam

2017-09-01

Full Text Available The presence of distributed generation (DG units in distribution systems increases the fault current level, which disrupts the existing coordination time interval of the protective overcurrent relays. One of the ways for decreasing DG effects on the coordination of protective devices is re-coordination of the relays by installing unidirectional fault current limiter (UFCL between the main grid (upstream network and the microgrid (downstream network. The UFCL does not limit fault current contribution of the upstream network when fault occurs in downstream but limits fault current contribution of the downstream network when fault occurs in the upstream. Moreover, it preserves the coordination between all of the relays. Several case studies are carried out for illustrating the performance of the UFCL in maintaining the relay coordination.

Bimanual motor coordination controlled by cooperative interactions in intrinsic and extrinsic coordinates.

Science.gov (United States)

Sakurada, Takeshi; Ito, Koji; Gomi, Hiroaki

2016-01-01

Although strong motor coordination in intrinsic muscle coordinates has frequently been reported for bimanual movements, coordination in extrinsic visual coordinates is also crucial in various bimanual tasks. To explore the bimanual coordination mechanisms in terms of the frame of reference, here we characterized implicit bilateral interactions in visuomotor tasks. Visual perturbations (finger-cursor gain change) were applied while participants performed a rhythmic tracking task with both index fingers under an in-phase or anti-phase relationship in extrinsic coordinates. When they corrected the right finger's amplitude, the left finger's amplitude unintentionally also changed [motor interference (MI)], despite the instruction to keep its amplitude constant. Notably, we observed two specificities: one was large MI and low relative-phase variability (PV) under the intrinsic in-phase condition, and the other was large MI and high PV under the extrinsic in-phase condition. Additionally, using a multiple-interaction model, we successfully decomposed MI into intrinsic components caused by motor correction and extrinsic components caused by visual-cursor mismatch of the right finger's movements. This analysis revealed that the central nervous system facilitates MI by combining intrinsic and extrinsic components in the condition with in-phases in both intrinsic and extrinsic coordinates, and that under-additivity of the effects is explained by the brain's preference for the intrinsic interaction over extrinsic interaction. In contrast, the PV was significantly correlated with the intrinsic component, suggesting that the intrinsic interaction dominantly contributed to bimanual movement stabilization. The inconsistent features of MI and PV suggest that the central nervous system regulates multiple levels of bilateral interactions for various bimanual tasks. © 2015 The Authors. European Journal of Neuroscience published by Federation of European Neuroscience Societies and

Web-Based Geographic Information Systems: Experience and Perspectives of Planners and the Implications for Extension

Science.gov (United States)

Göçmen, Z. Asligül

2016-01-01

Web-based geographic information system (GIS) technology, or web-based GIS, offers many opportunities for public planners and Extension educators who have limited GIS backgrounds or resources. However, investigation of its use in planning has been limited. The study described here examined the use of web-based GIS by public planning agencies. A…

Utilizing patient geographic information system data to plan telemedicine service locations.

Science.gov (United States)

Soares, Neelkamal; Dewalle, Joseph; Marsh, Ben

2017-09-01

To understand potential utilization of clinical services at a rural integrated health care system by generating optimal groups of telemedicine locations from electronic health record (EHR) data using geographic information systems (GISs). This retrospective study extracted nonidentifiable grouped data of patients over a 2-year period from the EHR, including geomasked locations. Spatially optimal groupings were created using available telemedicine sites by calculating patients' average travel distance (ATD) to the closest clinic site. A total of 4027 visits by 2049 unique patients were analyzed. The best travel distances for site groupings of 3, 4, 5, or 6 site locations were ranked based on increasing ATD. Each one-site increase in the number of available telemedicine sites decreased minimum ATD by about 8%. For a given group size, the best groupings were very similar in minimum travel distance. There were significant differences in predicted patient load imbalance between otherwise similar groupings. A majority of the best site groupings used the same small number of sites, and urban sites were heavily used. With EHR geospatial data at an individual patient level, we can model potential telemedicine sites for specialty access in a rural geographic area. Relatively few sites could serve most of the population. Direct access to patient GIS data from an EHR provides direct knowledge of the client base compared to methods that allocate aggregated data. Geospatial data and methods can assist health care location planning, generating data about load, load balance, and spatial accessibility. © The Author 2017. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Gulf-Wide Information System, Environmental Sensitivity Index Marsh, Geographic NAD83, LDWF (2001) [esi_fresh_marsh_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains Environmental Sensitivity Index (ESI) fresh marsh data of coastal Louisiana. The ESI is a classification and ranking system, which...

Influence of Geographic Factors on the Life Cycle Climate Change Impacts of Renewable Energy Systems

Science.gov (United States)

Fortier, M. O. P.

2017-12-01

Life cycle assessment (LCA) is a valuable tool to measure the cradle-to-grave climate change impacts of the sustainable energy systems that are planned to replace conventional fossil energy-based systems. The recent inclusion of geographic specificity in bioenergy LCAs has shown that the relative sustainability of these energy sources is often dependent on geographic factors, such as the climate change impact of changing the land cover and local resource availability. However, this development has not yet been implemented to most LCAs of energy systems that do not have biological feedstocks, such as wind, water, and solar-based energy systems. For example, the tidal velocity where tidal rotors are installed can significantly alter the life cycle climate change impacts of electricity generated using the same technology in different locations. For LCAs of solar updraft towers, the albedo change impacts arising from changing the reflectivity of the land that would be converted can be of the same magnitude as other life cycle process climate change impacts. Improvements to determining the life cycle climate change impacts of renewable energy technologies can be made by utilizing GIS and satellite data and by conducting site-specific analyses. This practice can enhance our understanding of the life cycle environmental impacts of technologies that are aimed to reduce the impacts of our current energy systems, and it can improve the siting of new systems to optimize a reduction in climate change impacts.