WorldWideScience

Sample records for generation rlv program

  1. 2nd Generation RLV Risk Definition Program

    Science.gov (United States)

    Davis, Robert M.; Stucker, Mark (Technical Monitor)

    2000-01-01

    The 2nd Generation RLV Risk Reduction Mid-Term Report summarizes the status of Kelly Space & Technology's activities during the first two and one half months of the program. This report was presented to the cognoscente Contracting Officer's Technical Representative (COTR) and selected Marshall Space Flight Center staff members on 26 September 2000. The report has been approved and is distributed on CD-ROM (as a PowerPoint file) in accordance with the terms of the subject contract, and contains information and data addressing the following: (1) Launch services demand and requirements; (2) Architecture, alternatives, and requirements; (3) Costs, pricing, and business cases analysis; (4) Commercial financing requirements, plans, and strategy; (5) System engineering processes and derived requirements; and (6) RLV system trade studies and design analysis.

  2. 2nd Generation RLV Risk Reduction Definition Program: Pratt & Whitney Propulsion Risk Reduction Requirements Program (TA-3 & TA-4)

    Science.gov (United States)

    Matlock, Steve

    2001-01-01

    This is the final report and addresses all of the work performed on this program. Specifically, it covers vehicle architecture background, definition of six baseline engine cycles, reliability baseline (space shuttle main engine QRAS), and component level reliability/performance/cost for the six baseline cycles, and selection of 3 cycles for further study. This report further addresses technology improvement selection and component level reliability/performance/cost for the three cycles selected for further study, as well as risk reduction plans, and recommendation for future studies.

  3. Technology readiness levels and technology status for selected long term/high payoff technologies on the RLV program

    Science.gov (United States)

    Rosmait, Russell L.

    1996-01-01

    The development of a new space transportation system in a climate of constant budget cuts and staff reductions can be and is a difficult task. It is no secret that NASA's current launching system consumes a very large portion of NASA funding and requires a large army of people to operate & maintain the system. The new Reusable Launch Vehicle (RLV) project and it's programs are faced with a monumental task of making the cost of access to space dramatically lower and more efficient than NASA's current system. With pressures from congressional budget cutters and also increased competition and loss of market share from international agencies RLV's first priority is to develop a 'low-cost, reliable transportation to earth orbit.' One of the RLV's major focus in achieving low-cost, reliable transportation to earth orbit is to rely on the maturing of advanced technologies. The technologies for the RLV are numerous and varied. Trying to assess their current status, within the RLV development program is paramount. There are several ways to assess these technologies. One way is through the use of Technology Readiness Levels (TRL's). This project focused on establishing current (summer 95) 'worst case' TRL's for six selected technologies that are under consideration for use within the RLV program. The six technologies evaluated were Concurrent Engineering, Embedded Sensor Technology, Rapid Prototyping, Friction Stir Welding, Thermal Spray Coatings, and VPPA Welding.

  4. Virtual Environment Computer Simulations to Support Human Factors Engineering and Operations Analysis for the RLV Program

    Science.gov (United States)

    Lunsford, Myrtis Leigh

    1998-01-01

    The Army-NASA Virtual Innovations Laboratory (ANVIL) was recently created to provide virtual reality tools for performing Human Engineering and operations analysis for both NASA and the Army. The author's summer research project consisted of developing and refining these tools for NASA's Reusable Launch Vehicle (RLV) program. Several general simulations were developed for use by the ANVIL for the evaluation of the X34 Engine Changeout procedure. These simulations were developed with the software tool dVISE 4.0.0 produced by Division Inc. All software was run on an SGI Indigo2 High Impact. This paper describes the simulations, various problems encountered with the simulations, other summer activities, and possible work for the future. We first begin with a brief description of virtual reality systems.

  5. X-33/RLV System Health Management/Vehicle Health Management

    Science.gov (United States)

    Mouyos, William; Wangu, Srimal

    1998-01-01

    To reduce operations costs, Reusable Launch Vehicles (RLVS) must include highly reliable robust subsystems which are designed for simple repair access with a simplified servicing infrastructure, and which incorporate expedited decision-making about faults and anomalies. A key component for the Single Stage To Orbit (SSTO) RLV system used to meet these objectives is System Health Management (SHM). SHM incorporates Vehicle Health Management (VHM), ground processing associated with the vehicle fleet (GVHM), and Ground Infrastructure Health Management (GIHM). The primary objective of SHM is to provide an automated and paperless health decision, maintenance, and logistics system. Sanders, a Lockheed Martin Company, is leading the design, development, and integration of the SHM system for RLV and for X-33 (a sub-scale, sub-orbit Advanced Technology Demonstrator). Many critical technologies are necessary to make SHM (and more specifically VHM) practical, reliable, and cost effective. This paper will present the X-33 SHM design which forms the baseline for the RLV SHM, and it will discuss applications of advanced technologies to future RLVs. In addition, this paper will describe a Virtual Design Environment (VDE) which is being developed for RLV. This VDE will allow for system design engineering, as well as program management teams, to accurately and efficiently evaluate system designs, analyze the behavior of current systems, and predict the feasibility of making smooth and cost-efficient transitions from older technologies to newer ones. The RLV SHM design methodology will reduce program costs, decrease total program life-cycle time, and ultimately increase mission success.

  6. Optimization of a Future RLV Business Case using Multiple Strategic Market Prices

    Science.gov (United States)

    Charania, A.; Olds, J. R.

    2002-01-01

    contribution, tax-breaks, loan guarantees, etc. The optimization performed here is for a 3rd Generation RLV program. The economic metric being optimized (maximized) is Net Present Value (NPV) based upon a given company financial structure and cost of capital assumptions. Such an optimization process demands more sophisticated optimizers and can result in non-unique solutions/local minimums if using gradient-based optimization. Domain spanning/evolutionary algorithms are used to obtain the optimized solution in the design space. These capabilities generally increase model calculation time but incorporate realistic pricing portfolios than just assuming one unified price for all launch markets. This analysis is conducted with CABAM running in Phoenix Integration's ModelCenter 4.0 collaborative design environment using the SpaceWorks Engineering, Inc. (SEI) OptWorks suite of optimization components.

  7. Reusable Launch Vehicle (RLV) Market Analysis Model

    Science.gov (United States)

    Prince, Frank A.

    1999-01-01

    The RLV Market Analysis model is at best a rough order approximation of actual market behavior. However, it does give a quick indication if the flights exists to enable an economically viable RLV, and the assumptions necessary for the vehicle to capture those flights. Additional analysis, market research, and updating with the latest information on payloads and launches would improve the model. Plans are to update the model as new information becomes available and new requirements are levied. This tool will continue to be a vital part of NASA's RLV business analysis capability for the foreseeable future.

  8. Inertial Navigation System for India's Reusable Launch Vehicle-Technology Demonstrator (RLV-TD HEX) Mission

    Science.gov (United States)

    Umadevi, P.; Navas, A.; Karuturi, Kesavabrahmaji; Shukkoor, A. Abdul; Kumar, J. Krishna; Sreekumar, Sreejith; Basim, A. Mohammed

    2017-12-01

    This work presents the configuration of Inertial Navigation System (INS) used in India's Reusable Launch Vehicle-Technology Demonstrator (RLV-TD) Program. In view of the specific features and requirements of the RLV-TD, specific improvements and modifications were required in the INS. A new system was designed, realised and qualified meeting the mission requirements of RLV-TD, at the same time taking advantage of the flight heritage attained in INS through various Launch vehicle Missions of the country. The new system has additional redundancy in acceleration channel, in-built inclinometer based bias update scheme for acceleration channels and sign conventions as employed in an aircraft. Data acquisition in micro cycle periodicity (10 ms) was incorporated which was required to provide rate and attitude information at higher sampling rate for ascent phase control. Provision was incorporated for acquisition of rate and acceleration data with high resolution for aerodynamic characterisation and parameter estimation. GPS aided navigation scheme was incorporated to meet the stringent accuracy requirements of the mission. Navigation system configuration for RLV-TD, specific features incorporated to meet the mission requirements, various tests carried out and performance during RLV-TD flight are highlighted.

  9. Steam generator management program

    International Nuclear Information System (INIS)

    Cho, Nam Cheoul; Kim, Moo Soo; Lee, Kwang Woo

    2003-01-01

    Recently, the common concern of nuclear power industry in the development of technology mitigating and preventing the aging of steam generator tubes prevails, because the trends of steam generator flaws at Uljin unit no. 1,2 and KSNP impose a burden on the operation of nuclear power plant. While the regulatory agency is demanding the establishment of the advanced general performance maintenance system, the steam generator management program adapting advanced technology is being developed which may comply with EPRI PWR SG guidelines based on NEI 97-06. General guidelines including all the maintenance aspects consist of the tube integrity assessment criteria, repair limit, allowable leakage level, water chemistry will be composed in order to obtain the approval of regulatory agency and be applied to nuclear power plant early 2005. This presentation is to introduce maintenance state including SG tube degradation and main contents of advanced SG management program being developed, and furthermore update present and future plan, and estimate the alternation after the completion

  10. NEXT GENERATION TURBINE PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    William H. Day

    2002-05-03

    The Next Generation Turbine (NGT) Program's technological development focused on a study of the feasibility of turbine systems greater than 30 MW that offer improvement over the 1999 state-of-the-art systems. This program targeted goals of 50 percent turndown ratios, 15 percent reduction in generation cost/kW hour, improved service life, reduced emissions, 400 starts/year with 10 minutes to full load, and multiple fuel usage. Improvement in reliability, availability, and maintainability (RAM), while reducing operations, maintenance, and capital costs by 15 percent, was pursued. This program builds on the extensive low emissions stationary gas turbine work being carried out by Pratt & Whitney (P&W) for P&W Power Systems (PWPS), which is a company under the auspices of the United Technologies Corporation (UTC). This study was part of the overall Department of Energy (DOE) NGT Program that extends out to the year 2008. A follow-on plan for further full-scale component hardware testing is conceptualized for years 2002 through 2008 to insure a smooth and efficient transition to the marketplace for advanced turbine design and cycle technology. This program teamed the National Energy Technology Laboratory (NETL), P&W, United Technologies Research Center (UTRC), kraftWork Systems Inc., a subcontractor on-site at UTRC, and Multiphase Power and Processing Technologies (MPPT), an off-site subcontractor. Under the auspices of the NGT Program, a series of analyses were performed to identify the NGT engine system's ability to serve multiple uses. The majority were in conjunction with a coal-fired plant, or used coal as the system fuel. Identified also was the ability of the NGT system to serve as the basis of an advanced performance cycle: the humid air turbine (HAT) cycle. The HAT cycle is also used with coal gasification in an integrated cycle HAT (IGHAT). The NGT systems identified were: (1) Feedwater heating retrofit to an existing coal-fired steam plant, which

  11. Generating Consistent Program Tutorials

    DEFF Research Database (Denmark)

    Vestdam, Thomas

    2002-01-01

    In this paper we present a tool that supports construction of program tutorials. A program tutorial provides the reader with an understanding of an example program by interleaving fragments of source code and explaining text. An example program can for example illustrate how to use a library or a......, and we see potential in using the tool to produce program tutorials to be used for frameworks, libraries, and in educational contexts.......In this paper we present a tool that supports construction of program tutorials. A program tutorial provides the reader with an understanding of an example program by interleaving fragments of source code and explaining text. An example program can for example illustrate how to use a library...... or a framework. We present a means for specifying the fragments of a program that are to be in-lined in the tutorial text. These in-line fragments are defined by addressing named syntactical elements, such as classes and methods, but it is also possible to address individual code lines by labeling them...

  12. Final Phase Flight Performance and Touchdown Time Assessment of TDV in RLV-TD HEX-01 Mission

    Science.gov (United States)

    Yadav, Sandeep; Jayakumar, M.; Nizin, Aziya; Kesavabrahmaji, K.; Shyam Mohan, N.

    2017-12-01

    RLV-TD HEX-01 mission was configured as a precursor flight to actual two stages to orbit vehicle. In this mission RLV-TD was designed as a two stage vehicle for demonstrating the hypersonic flight of a winged body vehicle at Mach No. 5. One of the main objectives of this mission was to generate data for better understanding of new technologies required to design the future vehicle. In this mission, the RLV-TD vehicle was heavily instrumented to get data related to performance of different subsystems. As per the mission design, RLV-TD will land in sea after flight duration of 700 s and travelling a distance of nearly 500 km in Bay of Bengal from the launch site for a nominal trajectory. The visibility studies for telemetry data of vehicle for the nominal and off nominal trajectories were carried out. Based on that, three ground stations were proposed for the telemetry data reception (including one in sea). Even with this scheme it was seen that during the final phase of the flight there will not be any ground station visible to the flight due to low elevation. To have the mission critical data during final phase of the flight, telemetry through INSAT scheme was introduced. During the end of the mission RLV-TD will be landing in the sea on a hypothetical runway. To know the exact time of touchdown for the flight in sea, there was no direct measurement available. Simultaneously there were all chances of losing ground station visibility just before touchdown, making it difficult to assess flight performance during that phase. In this work, telemetry and instrumentation scheme of RLV-TD HEX-01 mission is discussed with an objective to determine the flight performance during the final phase. Further, using various flight sensor data the touchdown time of TDV is assessed for this mission.

  13. Self-generating program specializers

    DEFF Research Database (Denmark)

    Glück, Robert

    2010-01-01

    This paper demonstrates the existence of self-generating program specializers and uses a language-independent projection to obtain them. The projection is considered from the viewpoint of the interpretive approach and a bootstrapping technique is identified by which a specializer can optimize its......-generation, which requires only a textual program comparison. Self-generation may thus provide a method for testing specializers and self-interpreters while they are under development....

  14. Higher-Order Program Generation

    DEFF Research Database (Denmark)

    Rhiger, Morten

    for OCaml, a dialect of ML, that provides run-time code generation for OCaml programs. We apply these byte-code combinators in semantics-directed compilation for an imperative language and in run-time specialization using type-directed partial evaluation. Finally, we present an approach to compiling goal......This dissertation addresses the challenges of embedding programming languages, specializing generic programs to specific parameters, and generating specialized instances of programs directly as executable code. Our main tools are higher-order programming techniques and automatic program generation...... infrastructure of higher-order functions, types, and modules. Furthermore, it has been observed that embedded programs can be restricted to those having simple types using a technique called ``phantom types''. We prove, using an idealized higher-order language, that such an embedding is sound (i.e., when all...

  15. Algorithm for programming function generators

    International Nuclear Information System (INIS)

    Bozoki, E.

    1981-01-01

    The present paper deals with a mathematical problem, encountered when driving a fully programmable μ-processor controlled function generator. An algorithm is presented to approximate a desired function by a set of straight segments in such a way that additional restrictions (hardware imposed) are also satisfied. A computer program which incorporates this algorithm and automatically generates the necessary input for the function generator for a broad class of desired functions is also described

  16. Research program plan: steam generators

    International Nuclear Information System (INIS)

    Muscara, J.; Serpan, C.Z. Jr.

    1985-07-01

    This document presents a plan for research in Steam Generators to be performed by the Materials Engineering Branch, MEBR, Division of Engineering Technology, (EDET), Office of Nuclear Regulatory Research. It is one of four plans describing the ongoing research in the corresponding areas of MEBR activity. In order to answer the questions posed, the Steam Generator Program has been organized with the three elements of non-destructive examination; mechanical integrity testing; and corrosion, cleaning and decontamination

  17. Mission Management Computer Software for RLV-TD

    Science.gov (United States)

    Manju, C. R.; Joy, Josna Susan; Vidya, L.; Sheenarani, I.; Sruthy, C. N.; Viswanathan, P. C.; Dinesh, Sudin; Jayalekshmy, L.; Karuturi, Kesavabrahmaji; Sheema, E.; Syamala, S.; Unnikrishnan, S. Manju; Ali, S. Akbar; Paramasivam, R.; Sheela, D. S.; Shukkoor, A. Abdul; Lalithambika, V. R.; Mookiah, T.

    2017-12-01

    The Mission Management Computer (MMC) software is responsible for the autonomous navigation, sequencing, guidance and control of the Re-usable Launch Vehicle (RLV), through lift-off, ascent, coasting, re-entry, controlled descent and splashdown. A hard real-time system has been designed for handling the mission requirements in an integrated manner and for meeting the stringent timing constraints. Redundancy management and fault-tolerance techniques are also built into the system, in order to achieve a successful mission even in presence of component failures. This paper describes the functions and features of the components of the MMC software which has accomplished the successful RLV-Technology Demonstrator mission.

  18. Steam generator tube integrity program

    International Nuclear Information System (INIS)

    Diercks, D.R.; Shack, W.J.

    1996-01-01

    The degradation of steam generator tubes in pressurized water nuclear reactors continues to be a serious problem, and the US Nuclear Regulatory Commission (NRC) is developing a performance-based rule and regulatory guide for steam generator tube integrity. To support the evaluation of industry-proposed implementation of these performance-based criteria, the NRC is sponsoring a new research program at Argonne National Laboratory on steam generator tubing degradation. The objective of the new program is to provide the necessary experimental data and predictive correlations and models that will permit the NRC to independently evaluate the integrity of steam generator tubes. The technical work in the program is divided into four tasks, (1) assessment of inspection reliability, (2) research on in-service inspection technology, (3) research on degradation modes and integrity, and (4) development of methodology and technical assessments for current and emerging regulatory issues. The objectives of and planned research activities under each of these four tasks are described here. (orig.)

  19. Symbol generators with program control

    International Nuclear Information System (INIS)

    Gryaznov, V.M.; Tomik, J.

    1974-01-01

    Methods of constructing symbol generators are described which ensure a program variation of symbol shape and setup. The symbols are formed on the basis of a point microraster. A symbol description code contains information on a symbol shape, with one digit corresponding to each microraster element. For a microraster discrete by-pass the description code is transformed into succession of illuminating pulses by means of a shift register

  20. Development of RLV-TD Stage Separation System

    Science.gov (United States)

    Mohan, Ganesh; Rao, Y. Naga Sreenivasa; Prakash, P.; Subramanian, U. A.; Purushothaman, P.; Premdas, M.; Abraham, Baby; Kishorenath, V.; Jayachandran, T.

    2017-12-01

    Hyper Sonic Experiment (HEX-01), with main focus on the aero thermodynamic characterization and end to end autonomous mission management, is the first in a series of demonstrators planned by ISRO for the development of a Reusable Launch Vehicle (RLV). This paper gives the evolution of the split collet based separation system used in the separation of the spent booster stage from the RLV-Technology Demonstrator Vehicle (TDV). The separation mechanism is very compact, yet has a very high load bearing capacity. The design details and the challenges faced during flight qualification of the system are discussed in this paper. There are a lot of promising areas where this system can be used.

  1. Design of Servo Scheme and Drive Electronics for the Integrated Electrohydraulic Actuation System of RLV-TD

    Science.gov (United States)

    Kurian, Priya C.; Gopinath, Anish; Shinoy, K. S.; Santhi, P.; Sundaramoorthy, K.; Sebastian, Baby; Jaya, B.; Namboodiripad, M. N.; Mookiah, T.

    2017-12-01

    Reusable Launch Vehicle-Technology Demonstrator (RLV-TD) is a system which has the ability to carry a payload from the earth's surface to the outer space more than once. The control actuation forms the major component of the control system and it actuates the control surfaces of the RLV-TD based on the control commands. Eight electro hydraulic actuators were used in RLV-TD for vectoring the control surfaces about their axes. A centralised Hydraulic Power Generating Unit (HPU) was used for powering the eight actuators located in two stages. The actuation system had to work for the longest ever duration of about 850 s for an Indian launch vehicle. High bandwidth requirement from autopilot was met by the servo design using the nonlinear mathematical model. Single Control Electronics which drive four electrohydraulic actuators was developed for each stage. High power electronics with soft start scheme was realized for driving the BLDC motor which is the prime mover for hydraulic pump. Many challenges arose due to single HPU for two stages, uncertainty of aero load, higher bandwidth requirements etc. and provisions were incorporated in the design to successfully overcome them. This paper describes the servo design and control electronics architecture of control actuation system.

  2. Steam-Generator Integrity Program/Steam-Generator Group Project

    International Nuclear Information System (INIS)

    1982-10-01

    The Steam Generator Integrity Program (SGIP) is a comprehensive effort addressing issues of nondestructive test (NDT) reliability, inservice inspection (ISI) requirements, and tube plugging criteria for PWR steam generators. In addition, the program has interactive research tasks relating primary side decontamination, secondary side cleaning, and proposed repair techniques to nondestructive inspectability and primary system integrity. The program has acquired a service degraded PWR steam generator for research purposes. This past year a research facility, the Steam Generator Examination Facility (SGEF), specifically designed for nondestructive and destructive examination tasks of the SGIP was completed. The Surry generator previously transported to the Hanford Reservation was then inserted into the SGEF. Nondestructive characterization of the generator from both primary and secondary sides has been initiated. Decontamination of the channelhead cold leg side was conducted. Radioactive field maps were established in the steam generator, at the generator surface and in the SGEF

  3. Aerosciences, Aero-Propulsion and Flight Mechanics Technology Development for NASA's Next Generation Launch Technology Program

    Science.gov (United States)

    Cockrell, Charles E., Jr.

    2003-01-01

    The Next Generation Launch Technology (NGLT) program, Vehicle Systems Research and Technology (VSR&T) project is pursuing technology advancements in aerothermodynamics, aeropropulsion and flight mechanics to enable development of future reusable launch vehicle (RLV) systems. The current design trade space includes rocket-propelled, hypersonic airbreathing and hybrid systems in two-stage and single-stage configurations. Aerothermodynamics technologies include experimental and computational databases to evaluate stage separation of two-stage vehicles as well as computational and trajectory simulation tools for this problem. Additionally, advancements in high-fidelity computational tools and measurement techniques are being pursued along with the study of flow physics phenomena, such as boundary-layer transition. Aero-propulsion technology development includes scramjet flowpath development and integration, with a current emphasis on hypervelocity (Mach 10 and above) operation, as well as the study of aero-propulsive interactions and the impact on overall vehicle performance. Flight mechanics technology development is focused on advanced guidance, navigation and control (GN&C) algorithms and adaptive flight control systems for both rocket-propelled and airbreathing vehicles.

  4. Quality Assurance and T&E of Inertial Systems for RLV Mission

    Science.gov (United States)

    Sathiamurthi, S.; Thakur, Nayana; Hari, K.; Peter, Pilmy; Biju, V. S.; Mani, K. S.

    2017-12-01

    This work describes the quality assurance and Test and Evaluation (T&E) activities carried out for the inertial systems flown successfully in India's first reusable launch vehicle technology demonstrator hypersonic experiment mission. As part of reliability analysis, failure mode effect and criticality analysis and derating analysis were carried out in the initial design phase, findings presented to design review forums and the recommendations were implemented. T&E plan was meticulously worked out and presented to respective forums for review and implementation. Test data analysis, health parameter plotting and test report generation was automated and these automations significantly reduced the time required for these activities and helped to avoid manual errors. Further, T&E cycle is optimized without compromising on quality aspects. These specific measures helped to achieve zero defect delivery of inertial systems for RLV application.

  5. PCC Framework for Program-Generators

    Science.gov (United States)

    Kong, Soonho; Choi, Wontae; Yi, Kwangkeun

    2009-01-01

    In this paper, we propose a proof-carrying code framework for program-generators. The enabling technique is abstract parsing, a static string analysis technique, which is used as a component for generating and validating certificates. Our framework provides an efficient solution for certifying program-generators whose safety properties are expressed in terms of the grammar representing the generated program. The fixed-point solution of the analysis is generated and attached with the program-generator on the code producer side. The consumer receives the code with a fixed-point solution and validates that the received fixed point is indeed a fixed point of the received code. This validation can be done in a single pass.

  6. Evaluación de la toxicidad del desodorante RLV en ojos Evaluation of RLV deodorant toxicity in eyes

    Directory of Open Access Journals (Sweden)

    Esvieta Tenorio Borroto

    2001-12-01

    Full Text Available Se realizó la evaluación del posible efecto irritante de un formulado (RLV que se empleará como desodorante y que contiene como principio activo la hexamina, la cual es empleada como antiséptico urinario. Este formulado se aplicó por vía oftálmica en 6 conejos de la raza Nueva Zelandia, durante 7 días. Las valoraciones se basan en las observaciones macroscópicas de los posibles efectos adversos que se presentan en las estructuras oculares. Para esta evaluación nos basamos en el método propuesto por Draize, así como las guías de la OECD, de acuerdo con los resultados obtenidos la forma farmacéutica elaborada a una concentración del 3 % para el desodorante, no ocasiona irritación en las estructuras oculares.An evaluation of the possible irritant effect of a formulation (RLV that will be used as a deodorant and whose active principle is hexamine, which is utilized as a urinary antiseptic, was made. This formulation was applied by ophthalmic route to 6 New Zealand breed rabbits during 7 days. The assessments take into consideration the macroscopic observations of the possible adverse effects that occur in the ocular structures. This evaluation is based on the method proposed by Draize, as well as on the guidelines of the OECD. According to the results obtained, the pharmaceutical form prepared at a concentration of 3 % for the deodorant does not cause irritation of the ocular structures.

  7. Program for parameter studies of steam generators

    International Nuclear Information System (INIS)

    Mathisen, R.P.

    1982-11-01

    R2-GEN is a computer code for stationary thermal parameter studies of steam generators. The geometry and data are valid for Ringhals-2 generators. Subroutines and relevant calculations are included. The program is based on a heterogeneous flow model and some applications on tubes with varying contamination are presented. (G.B.)

  8. DIGRD: an interactive grid generating program

    International Nuclear Information System (INIS)

    Foote, H.P.; Rice, W.A.; Kincaid, C.T.

    1982-11-01

    Pacific Northwest Laboratory has completed the development and documentation of an interactive grid generating program (DIGRD, digitize grid). This program is designed to rapidly generate or modify grids necessary for the unsaturated flow code TRUST. In addition to the code, a user's manual was prepared. Unfortunately, the computer hardware that comprises the PNL interactive graphics capability is unique. Direct technology transfer is not possible, therefore, this report is intended to convey the utility of interactive graphics in supplying a grid generating capability. DIGRD has already been effectively used in the preparation of grids for the analysis of leachate movement from uranium mill tailings. The principal conclusion is that the interactive graphics employed in DIGRD are useful and economical in the development of complex grids. Grid generation activities that previously took between a half- and a full-man month can now be completed in less than a week. DIGRD users have recommended development of an uniform grid of either rectangles or equilateral triangles, which could be superimposed on any domain and then adjusted through the DIGRD program to match the boundaries of a tailings disposal facility. This improvement to the DIGRD package could further reduce the effort in grid generation while providing more optimal grids

  9. Intergenerational Learning Program: A Bridge between Generations

    Directory of Open Access Journals (Sweden)

    Seyedeh Zahra Aemmi

    2017-12-01

    Full Text Available One of the goals of education can be considered the transfer of knowledge, skills, competencies, wisdom, norms and values between generations. Intergenerational learning program provide this goal and opportunities for lifelong learning and sharing knowledge and experience between generations. This review aimed to investigate the benefits of this program for the children and older adult and its application in health care systems. An extensive literature search was conducted in some online databases such as Magiran, SID, Scopus, EMBASE, and Medline via PubMed until July 2016 and Persian and English language publications studied that met inclusion criteria. The review concluded that this program can be provided wonderful resources for the social and emotional growth of the children and older adults and can be used for caring, education and follow-up in health care systems especially by nurses. Also, this review highlighted the need for research about this form of learning in Iran.

  10. NASA's Next Generation Space Geodesy Program

    Science.gov (United States)

    Merkowitz, S. M.; Desai, S. D.; Gross, R. S.; Hillard, L. M.; Lemoine, F. G.; Long, J. L.; Ma, C.; McGarry, J. F.; Murphy, D.; Noll, C. E.; hide

    2012-01-01

    Requirements for the ITRF have increased dramatically since the 1980s. The most stringent requirement comes from critical sea level monitoring programs: a global accuracy of 1.0 mm, and 0.1mm/yr stability, a factor of 10 to 20 beyond current capability. Other requirements for the ITRF coming from ice mass change, ground motion, and mass transport studies are similar. Current and future satellite missions will have ever-increasing measurement capability and will lead to increasingly sophisticated models of these and other changes in the Earth system. Ground space geodesy networks with enhanced measurement capability will be essential to meeting the ITRF requirements and properly interpreting the satellite data. These networks must be globally distributed and built for longevity, to provide the robust data necessary to generate improved models for proper interpretation of the observed geophysical signals. NASA has embarked on a Space Geodesy Program with a long-range goal to build, deploy and operate a next generation NASA Space Geodetic Network (SGN). The plan is to build integrated, multi-technique next-generation space geodetic observing systems as the core contribution to a global network designed to produce the higher quality data required to maintain the Terrestrial Reference Frame and provide information essential for fully realizing the measurement potential of the current and coming generation of Earth Observing spacecraft. Phase 1 of this project has been funded to (1) Establish and demonstrate a next-generation prototype integrated Space Geodetic Station at Goddard's Geophysical and Astronomical Observatory (GGAO), including next-generation SLR and VLBI systems along with modern GNSS and DORIS; (2) Complete ongoing Network Design Studies that describe the appropriate number and distribution of next-generation Space Geodetic Stations for an improved global network; (3) Upgrade analysis capability to handle the next-generation data; (4) Implement a modern

  11. Revalidation program for nuclear standby diesel generators

    International Nuclear Information System (INIS)

    Muschick, R.P.

    1985-01-01

    This paper describes the program which Duke Power Company carried out to revalidate the diesel engines used in diesel generators for nuclear standby service at Unit 1 of the Catawba Nuclear Station. The diesels operated satisfactorily during the tests, and only relatively minor conditions were noted during the test and inspections, with one exception. This exception was that cracks were detected in the piston skirts. The piston skirts have been replaced with improved design skirts. The diesels have been fully revalidated for their intended service, and have been declared operable

  12. Thermonuclear generation program: risks and safety

    International Nuclear Information System (INIS)

    Goes, Alexandre Gromann de Araujo

    1999-01-01

    This work deals with the fundamental concepts of risk and safety related to nuclear power generation. In the first chapter, a general evaluation of the various systems for energy generation and their environmental impacts is made. Some definitions for safety and risk are suggested, based on the already existing regulatory processes and also on the current tendencies of risk management. Aspects regarding the safety culture are commented. The International Nuclear Event Scale (INES), a coherent and clear mechanism of communication between nuclear specialists and the general public, is analyzed. The second chapter examines the thermonuclear generation program in Brazil and the role of the National Nuclear Energy Commission. The third chapter presents national and international scenarios in terms of safety and risks, available policies and the main obstacles for future development of nuclear energy and nuclear engineering, and strategies are proposed. In the last chapter, comments about possible trends and recommendations related to practical risk management procedures, taking into account rational criteria for resources distribution and risk reduction are made, envisaging a closer integration between nuclear specialists and the society as a whole, thus decreasing the conflicts in a democratic decision-making process

  13. SNAP-8 electrical generating system development program

    Science.gov (United States)

    1971-01-01

    The SNAP-8 program has developed the technology base for one class of multikilowatt dynamic space power systems. Electrical power is generated by a turbine-alternator in a mercury Rankine-cycle loop to which heat is transferred and removed by means of sodium-potassium eutectic alloy subsystems. Final system overall criteria include a five-year operating life, restartability, man rating, and deliverable power in the 90 kWe range. The basic technology has been demonstrated by more than 400,000 hours of major component endurance testing and numerous startup and shutdown cycles. A test system, comprised of developed components, delivered up to 35 kWe for a period exceeding 12,000 hours. The SNAP-8 system baseline is considered to have achieved a level of technology suitable for final application development for long-term multikilowatt space missions.

  14. Inductive programmed generator for electrothermal guns

    Science.gov (United States)

    Kanter, M.; Michael, G.; Kaplan, Z.; Loeb, A.

    1989-01-01

    A three-stage generator experimental circuit for current multiplication has been designed and tested with semiconductor switches and a resistive load. The inductors are charged from a capacitor bank at 500 A and store 0.6 kJ. The load current is amplified and shaped through the timing of the switch operation. With commercially available single GTO (gate-turn-off thyristor) switches, current in the range of several kA has been achieved. A simulation program has been constructed for the experimental circuit, and the equations of a simplified circuit coupled to an electrothermal load have been solved analytically. Based on these calculations, a conceptual design is given for a 1-MJ system.

  15. Task 4 supporting technology. Part 2: Detailed test plan for thermal seals. Thermal seals evaluation, improvement and test. CAN8-1, Reusable Launch Vehicle (RLV), advanced technology demonstrator: X-33. Leading edge and seals thermal protection system technology demonstration

    Science.gov (United States)

    Hogenson, P. A.; Lu, Tina

    1995-01-01

    The objective is to develop the advanced thermal seals to a technology readiness level (TRL) of 6 to support the rapid turnaround time and low maintenance requirements of the X-33 and the future reusable launch vehicle (RLV). This program is divided into three subtasks: (1) orbiter thermal seals operation history review; (2) material, process, and design improvement; and (3) fabrication and evaluation of the advanced thermal seals.

  16. A strategy for automatically generating programs in the lucid programming language

    Science.gov (United States)

    Johnson, Sally C.

    1987-01-01

    A strategy for automatically generating and verifying simple computer programs is described. The programs are specified by a precondition and a postcondition in predicate calculus. The programs generated are in the Lucid programming language, a high-level, data-flow language known for its attractive mathematical properties and ease of program verification. The Lucid programming is described, and the automatic program generation strategy is described and applied to several example problems.

  17. Mission Management Computer and Sequencing Hardware for RLV-TD HEX-01 Mission

    Science.gov (United States)

    Gupta, Sukrat; Raj, Remya; Mathew, Asha Mary; Koshy, Anna Priya; Paramasivam, R.; Mookiah, T.

    2017-12-01

    Reusable Launch Vehicle-Technology Demonstrator Hypersonic Experiment (RLV-TD HEX-01) mission posed some unique challenges in the design and development of avionics hardware. This work presents the details of mission critical avionics hardware mainly Mission Management Computer (MMC) and sequencing hardware. The Navigation, Guidance and Control (NGC) chain for RLV-TD is dual redundant with cross-strapped Remote Terminals (RTs) interfaced through MIL-STD-1553B bus. MMC is Bus Controller on the 1553 bus, which does the function of GPS aided navigation, guidance, digital autopilot and sequencing for the RLV-TD launch vehicle in different periodicities (10, 20, 500 ms). Digital autopilot execution in MMC with a periodicity of 10 ms (in ascent phase) is introduced for the first time and successfully demonstrated in the flight. MMC is built around Intel i960 processor and has inbuilt fault tolerance features like ECC for memories. Fault Detection and Isolation schemes are implemented to isolate the failed MMC. The sequencing hardware comprises Stage Processing System (SPS) and Command Execution Module (CEM). SPS is `RT' on the 1553 bus which receives the sequencing and control related commands from MMCs and posts to downstream modules after proper error handling for final execution. SPS is designed as a high reliability system by incorporating various fault tolerance and fault detection features. CEM is a relay based module for sequence command execution.

  18. Improving Generation Y Volunteerism in Extension Programs

    Science.gov (United States)

    Andrews, Kevin B.; Lockett, Landry L.

    2013-01-01

    Members of Generation Y have many positive attributes that make them attractive to Extension volunteer administrators as a potential source of labor. However, they think differently, have unique needs, require new management styles, and have less tolerance for unpleasant working conditions than previous generations. Additionally, they are engaged…

  19. Automatic program generation: future of software engineering

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, J.H.

    1979-01-01

    At this moment software development is still more of an art than an engineering discipline. Each piece of software is lovingly engineered, nurtured, and presented to the world as a tribute to the writer's skill. When will this change. When will the craftsmanship be removed and the programs be turned out like so many automobiles from an assembly line. Sooner or later it will happen: economic necessities will demand it. With the advent of cheap microcomputers and ever more powerful supercomputers doubling capacity, much more software must be produced. The choices are to double the number of programers, double the efficiency of each programer, or find a way to produce the needed software automatically. Producing software automatically is the only logical choice. How will automatic programing come about. Some of the preliminary actions which need to be done and are being done are to encourage programer plagiarism of existing software through public library mechanisms, produce well understood packages such as compiler automatically, develop languages capable of producing software as output, and learn enough about the whole process of programing to be able to automate it. Clearly, the emphasis must not be on efficiency or size, since ever larger and faster hardware is coming.

  20. A computer program for the pointwise functions generation

    International Nuclear Information System (INIS)

    Caldeira, Alexandre D.

    1995-01-01

    A computer program that was developed with the objective of generating pointwise functions, by a combination of tabulated values and/or mathematical expressions, to be used as weighting functions for nuclear data is presented. This simple program can be an important tool for researchers involved in group constants generation. (author). 5 refs, 2 figs

  1. A calculation program for electricity generation costs using LOTUS

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sung Ki; Lee, Man Ki [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-12-01

    This program is designed in order to calculate electricity generation cost by different energy sources, and menu type is adopted for user convenience. This program also graphically shows the share of capital investment cost, O and M cost, and fuel cost. Sensitivity analysis about discount rate can also be carried out by this program, taking into consideration the important role of the discount rate in the generation costs calculation. (Author) 7 refs., 1 fig., 3 tabs.

  2. Next Generation Drivetrain Development and Test Program

    Energy Technology Data Exchange (ETDEWEB)

    Keller, Jonathan; Erdman, Bill; Blodgett, Doug; Halse, Chris; Grider, Dave

    2015-11-03

    This presentation was given at the Wind Energy IQ conference in Bremen, Germany, November 30 through December 2, 2105. It focused on the next-generation drivetrain architecture and drivetrain technology development and testing (including gearbox and inverter software and medium-voltage inverter modules.

  3. Nursing Shortage Generates Innovative Program Expansion

    Science.gov (United States)

    Welhan, Beverly L.; Benfield, Ruth A.

    2008-01-01

    Responding to an impending health crisis due to a national nursing shortage, Montgomery County Community College increased nursing admissions by 50% and graduates by 51% through implementing a Continuous Nursing Program (CNP). Through implementing three 14-week semesters per year, the CNP uses an accelerated timeframe while maintaining a…

  4. The RANDOM computer program: A linear congruential random number generator

    Science.gov (United States)

    Miles, R. F., Jr.

    1986-01-01

    The RANDOM Computer Program is a FORTRAN program for generating random number sequences and testing linear congruential random number generators (LCGs). The linear congruential form of random number generator is discussed, and the selection of parameters of an LCG for a microcomputer described. This document describes the following: (1) The RANDOM Computer Program; (2) RANDOM.MOD, the computer code needed to implement an LCG in a FORTRAN program; and (3) The RANCYCLE and the ARITH Computer Programs that provide computational assistance in the selection of parameters for an LCG. The RANDOM, RANCYCLE, and ARITH Computer Programs are written in Microsoft FORTRAN for the IBM PC microcomputer and its compatibles. With only minor modifications, the RANDOM Computer Program and its LCG can be run on most micromputers or mainframe computers.

  5. Point Lepreau Generating Station - 1995 SLAR program

    International Nuclear Information System (INIS)

    Baker, R.

    1996-01-01

    The Pt. Lepreau SLAR Program began after the successful use of the SLAR MKIII Tool during the 1993 Pt. Lepreau G.S. Maintenance outage. Preparations began immediately to assemble staff and equipment to complete a full core SLAR starting in April 1995. Installation and commissioning of the SLAR System at site began on March 29/95 and on reactor operations started on April 15/95. A total of 372 channels were visited with SLAR and all but 4 were dispositioned to the target life of 241, 500 Effective Full Power Hours. SLAR operations were completed on October 5/95 and within 7 days the Fuel Handling System was returned to pre-SLAR configuration and functionally tested. The SLAR Program was completed on schedule and within budget. (author)

  6. LORAN Warpage Coefficients Generation Program (WARP).

    Science.gov (United States)

    1981-02-23

    technical report has been reviewed and is cipproved for publicationl. LEE D. McINTOSH Program Manager FOR THE COMMANDER DAVID H. AMOS, Cdr, USCG Chief Tac...ither of these two s;pheroi is *ohen the 4ar lo co I ic i iot s have i)eon ~jenera te1 ust ig a di ff erent one. Th ere i s alIsoI a K’ .’r’ a noia L i.a

  7. Generating Epsilon-Efficient Solutions in Multiobjective Programming

    National Research Council Canada - National Science Library

    Engau, Alexander; Wiecek, Margaret M

    2005-01-01

    Scalarization approaches to purposely generating epsilon-efficient solutions of multiobjective programs are investigated and a generic procedure for computing these solutions is proposed and illustrated with an example...

  8. FED, Geometry Input Generator for Program TRUMP

    International Nuclear Information System (INIS)

    Schauer, D.A.; Elrod, D.C.

    1996-01-01

    1 - Description of program or function: FED reduces the effort required to obtain the necessary geometric input for problems which are to be solved using the heat-transfer code, TRUMP (NESC 771). TRUMP calculates transient and steady-state temperature distributions in multidimensional systems. FED can properly zone any body of revolution in one, or three dimensions. 2 - Method of solution: The region of interest must first be divided into areas which may consist of a common material. The boundaries of these areas are the required FED input. Each area is subdivided into volume nodes, and the geometrical properties are calculated. Finally, FED connects the adjacent nodes to one another, using the proper surface area, interface distance, and, if specified, radiation form factor and interface conductance. 3 - Restrictions on the complexity of the problem: Rectangular bodies can only be approximated by using a very large radius of revolution compared to the total radial thickness and by considering only a small angular segment in the circumferential direction

  9. Approximate Bayesian Image Interpretation using Generative Probabilistic Graphics Programs

    OpenAIRE

    Mansinghka, Vikash K.; Kulkarni, Tejas D.; Perov, Yura N.; Tenenbaum, Joshua B.

    2013-01-01

    The idea of computer vision as the Bayesian inverse problem to computer graphics has a long history and an appealing elegance, but it has proved difficult to directly implement. Instead, most vision tasks are approached via complex bottom-up processing pipelines. Here we show that it is possible to write short, simple probabilistic graphics programs that define flexible generative models and to automatically invert them to interpret real-world images. Generative probabilistic graphics program...

  10. Program pseudo-random number generator for microcomputers

    International Nuclear Information System (INIS)

    Ososkov, G.A.

    1980-01-01

    Program pseudo-random number generators (PNG) intended for the test of control equipment and communication channels are considered. In the case of 8-bit microcomputers it is necessary to assign 4 words of storage to allocate one random number. The proposed economical algorithms of the random number generation are based on the idea of the ''mixing'' of such quarters of the preceeding random number to obtain the next one. Test results of the PNG are displayed for two such generators. A FORTRAN variant of the PNG is presented along with a program realizing the PNG made on the base of the INTEL-8080 autocode

  11. Selenide isotope generator for the Galileo mission. Reliability program plan

    International Nuclear Information System (INIS)

    1978-10-01

    The reliability program plan for the Selenide Isotope Generator (SIG) program is presented. It delineates the specific tasks that will be accomplished by Teledyne Energy Systems and its suppliers during design, development, fabrication and test of deliverable Radioisotopic Thermoelectric Generators (RTG), Electrical Heated Thermoelectric Generators (ETG) and associated Ground Support Equipment (GSE). The Plan is formulated in general accordance with procedures specified in DOE Reliability Engineering Program Requirements Publication No. SNS-2, dated June 17, 1974. The Reliability Program Plan presented herein defines the total reliability effort without further reference to Government Specifications. The reliability tasks to be accomplished are delineated herein and become the basis for contract compliance to the extent specified in the SIG contract Statement of Work

  12. Is your residency program ready for Generation Y?

    Science.gov (United States)

    Schlitzkus, Lisa L; Schenarts, Kimberly D; Schenarts, Paul J

    2010-01-01

    Current residency applicants are members of Generation Y and are significantly different from previous generations of trainees as well as the faculty who attract, recruit, and manage them. Generation Y has been affected by globalization, diversification, terrorism, and international crisis. They are products of the self-esteem movement in child rearing, education, and extracurricular activities where they were all declared winners. Children's activities no longer had winners and losers or first, second, and third place; every child received a participation trophy. Even though they were raised to be a team player, their parents always told them they are special. Technology is ingrained into their daily lives, and they expect its use to be effective and efficient. Generation Y-ers desire to impact the world and give back to their communities and demand immediate access to leadership. This generation poses a challenge to residency programs that will need to attract, recruit, and manage them effectively. This article will provide an overview of Generation Y, contrast Generation Y with Generation X, and discuss how to use generation-specific strategies to attract, recruit, and manage a Generation Y resident. Copyright 2010 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  13. Guidelines for developing certification programs for newly generated TRU waste

    International Nuclear Information System (INIS)

    Whitty, W.J.; Ostenak, C.A.; Pillay, K.K.S.; Geoffrion, R.R.

    1983-05-01

    These guidelines were prepared with direction from the US Department of Energy (DOE) Transuranic (TRU) Waste Management Program in support of the DOE effort to certify that newly generated TRU wastes meet the Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria. The guidelines provide instructions for generic Certification Program preparation for TRU-waste generators preparing site-specific Certification Programs in response to WIPP requirements. The guidelines address all major aspects of a Certification Program that are necessary to satisfy the WIPP Waste Acceptance Criteria and their associated Compliance Requirements and Certification Quality Assurance Requirements. The details of the major element of a Certification Program, namely, the Certification Plan, are described. The Certification Plan relies on supporting data and control documentation to provide a traceable, auditable account of certification activities. Examples of specific parts of the Certification Plan illustrate the recommended degree of detail. Also, a brief description of generic waste processes related to certification activities is included

  14. Special simulation programs generated by DSNP for educational uses

    International Nuclear Information System (INIS)

    Madell, J.T.

    1986-01-01

    The DSNP (dynamic simulator for nuclear power plants) language is a high-level simulation language whose translator writes FORTRAN programs for reactor system transient analyses. The high-level character of DSNP greatly facilitates the generation of FORTRAN programs, which may then be duplicated on floppy disks for execution on personal computers (PCs). A student's understanding of reactor dynamic principles may be enhanced by running extensive parametric studies as either a classroom or special project exercise. This DSNP capability was demonstrated, in principle, by the simulation of an entire primary system in a program that was modified, down-loaded, and run on a microcomputer. The demonstration uncovered two drawbacks: extensive editing of the DSNP-generated FORTRAN program for consistency with microcomputer software and long running times on the PC. The DSNP translator was recently revised to produce programs consistent with the microcomputer software. Elimination of the second drawback is the subject of this paper

  15. Visual Meta-Programming Language Graphical User Interface for Generative Programming

    National Research Council Canada - National Science Library

    Carpenter, Steven

    2002-01-01

    ..., and generates formatted output that can be used by generative programs to produce code. Areas of study will include efficient data structure design to capture the nature and characteristics of visual elements of the language and translation of visual design to a format suitable for use by other programs.

  16. Modelling of windmill induction generators in dynamic simulation programs

    DEFF Research Database (Denmark)

    Akhmatov, Vladislav; Knudsen, Hans

    1999-01-01

    For AC networks with large amounts of induction generators-in case of e.g. windmills-the paper demonstrates a significant discrepancy in the simulated voltage recovery after faults in weak networks, when comparing result obtained with dynamic stability programs and transient programs, respectively...... with and without a model of the mechanical shaft. The reason for the discrepancies are explained, and it is shown that the phenomenon is due partly to the presence of DC offset currents in the induction machine stator, and partly to the mechanical shaft system of the wind turbine and the generator rotor...

  17. Steam generator deposit control program assessment at Comanche Peak

    International Nuclear Information System (INIS)

    Stevens, J.; Fellers, B.; Orbon, S.

    2002-01-01

    Comanche Peak has employed a variety of methods to assess the effectiveness of the deposit control program. These include typical methods such as an extensive visual inspection program and detailed corrosion product analysis and trending. In addition, a recently pioneered technique, low frequency eddy current profile analysis (LFEC) has been utilized. LFEC provides a visual mapping of the magnetite deposit profile of the steam generator. Analysis of the LFEC results not only provides general area deposition rates, but can also provide local deposition patterns, which is indicative of steam generator performance. Other techniques utilized include trending of steam pressure, steam generator hideout-return, and flow assisted corrosion (FAC) results. The sum of this information provides a comprehensive assessment of the deposit control program effectiveness and the condition of the steam generator. It also provides important diagnostic and predictive information relative to steam generator life management and mitigative strategies, such as special cleaning procedures. This paper discusses the techniques employed by Comanche Peak Chemistry to monitor the effectiveness of the deposit control program and describes how this information is used in strategic planning. (authors)

  18. A Monte Carlo program for generating hadronic final states

    International Nuclear Information System (INIS)

    Angelini, L.; Pellicoro, M.; Nitti, L.; Preparata, G.; Valenti, G.

    1991-01-01

    FIRST is a computer program to generate final states from high energy hadronic interactions using the Monte Carlo technique. It is based on a theoretical model in which the high degree of universality in such interactions is related with the existence of highly excited quark-antiquark bound states, called fire-strings. The program handles the decay of both fire-strings and unstable particles produced in the intermediate states. (orig.)

  19. NNSA Program Develops the Next Generation of Nuclear Security Experts

    Energy Technology Data Exchange (ETDEWEB)

    Brim, Cornelia P.; Disney, Maren V.

    2015-09-02

    NNSA is fostering the next generation of nuclear security experts is through its successful NNSA Graduate Fellowship Program (NGFP). NGFP offers its Fellows an exceptional career development opportunity through hands-on experience supporting NNSA mission areas across policy and technology disciplines. The one-year assignments give tomorrow’s leaders in global nuclear security and nonproliferation unparalleled exposure through assignments to Program Offices across NNSA.

  20. Automatic generation of pictorial transcripts of video programs

    Science.gov (United States)

    Shahraray, Behzad; Gibbon, David C.

    1995-03-01

    An automatic authoring system for the generation of pictorial transcripts of video programs which are accompanied by closed caption information is presented. A number of key frames, each of which represents the visual information in a segment of the video (i.e., a scene), are selected automatically by performing a content-based sampling of the video program. The textual information is recovered from the closed caption signal and is initially segmented based on its implied temporal relationship with the video segments. The text segmentation boundaries are then adjusted, based on lexical analysis and/or caption control information, to account for synchronization errors due to possible delays in the detection of scene boundaries or the transmission of the caption information. The closed caption text is further refined through linguistic processing for conversion to lower- case with correct capitalization. The key frames and the related text generate a compact multimedia presentation of the contents of the video program which lends itself to efficient storage and transmission. This compact representation can be viewed on a computer screen, or used to generate the input to a commercial text processing package to generate a printed version of the program.

  1. Generative design visualize, program, and create with processing

    CERN Document Server

    Bohnacker, Hartmut; Laub, Julia; Lazzeroni, Claudius

    2012-01-01

    Generative design is a revolutionary new method of creating artwork, models, and animations from sets of rules, or algorithms. By using accessible programming languages such as Processing, artists and designers are producing extravagant, crystalline structures that can form the basis of anything from patterned textiles and typography to lighting, scientific diagrams, sculptures, films, and even fantastical buildings. Opening with a gallery of thirty-five illustrated case studies, Generative Design takes users through specific, practical instructions on how to create their own visual experiments by combining simple-to-use programming codes with basic design principles. A detailed handbook of advanced strategies provides visual artists with all the tools to achieve proficiency. Both a how-to manual and a showcase for recent work in this exciting new field, Generative Design is the definitive study and reference book that designers have been waiting for.

  2. Automatic generation of computer programs servicing TFTR console displays

    International Nuclear Information System (INIS)

    Eisenberg, H.

    1983-01-01

    A number of alternatives were considered in providing programs to support the several hundred displays required for control and monitoring of TFTR equipment. Since similar functions were performed, an automated method of creating programs was suggested. The complexity of a single program servicing as many as thirty consoles mitigated against that approach. Similarly, creation of a syntactic language while elegant, was deemed to be too time consuming, and had the disadvantage of requiring a working knowledge of the language on a programming level. It was elected to pursue a method of generating an individual program to service a particular display. A feasibility study was conducted and the Control and Monitor Display Generator system (CMDG) was developed. A Control and Monitor Display Service Program (CMDS) provides a means of performing monitor and control functions for devices associated with TFTR subsystems, as well as other user functions, via TFTR Control Consoles. This paper discusses the specific capabilities provided by CMDS in a usage context, as well as the mechanics of implementation

  3. Steam generator tube integrity program. Phase I report

    International Nuclear Information System (INIS)

    Alzheimer, J.M.; Clark, R.A.; Morris, C.J.; Vagins, M.

    1979-09-01

    The results are presented of the pressure tests performed as part of Phase I of the Steam Generator Tube Integrity (SGTI) program at Battelle Pacific Northwest Laboratory. These tests were performed to establish margin-to-failure predictions for mechanically defected Pressurized Water Reactor (PWR) steam generator tubing under operating and accident conditions. Defect geometries tested were selected because they simulate known or expected defects in PWR steam generators. These defect geometries are Electric Discharge Machining (EDM) slots, elliptical wastage, elliptical wastage plus through-wall slot, uniform thinning, denting, denting plus uniform thinning, and denting plus elliptical wastage. All defects were placed in tubing representative of that currently used in PWR steam generators

  4. Automatic generation of Fortran programs for algebraic simulation models

    International Nuclear Information System (INIS)

    Schopf, W.; Rexer, G.; Ruehle, R.

    1978-04-01

    This report documents a generator program by which econometric simulation models formulated in an application-orientated language can be transformed automatically in a Fortran program. Thus the model designer is able to build up, test and modify models without the need of a Fortran programmer. The development of a computer model is therefore simplified and shortened appreciably; in chapter 1-3 of this report all rules are presented for the application of the generator to the model design. Algebraic models including exogeneous and endogeneous time series variables, lead and lag function can be generated. In addition, to these language elements, Fortran sequences can be applied to the formulation of models in the case of complex model interrelations. Automatically the generated model is a module of the program system RSYST III and is therefore able to exchange input and output data with the central data bank of the system and in connection with the method library modules can be used to handle planning problems. (orig.) [de

  5. Tegen - an onedimensional program to calculate a thermoelectric generator

    International Nuclear Information System (INIS)

    Rosa, M.A.P.; Ferreira, P.A.; Castro Lobo, P.D. de.

    1990-01-01

    A computer program for the solution of the one-dimensional, steady-state temperature equation in the arms of a thermoelectric generator. The discretized equations obtained through a finite difference scheme are solved by Gaussian Elimination. Due to nonlinearities caused by the temperature dependence of the coefficients of such equations, an iterative procedure is used to obtain the temperature distribution in the arms. Such distributions are used in the calculation of the efficiency, electric power, load voltage and other relevant parameters for the design of a thermoelectric generator. (author)

  6. MODULEWRITER: a program for automatic generation of database interfaces.

    Science.gov (United States)

    Zheng, Christina L; Fana, Fariba; Udupi, Poornaprajna V; Gribskov, Michael

    2003-05-01

    MODULEWRITER is a PERL object relational mapping (ORM) tool that automatically generates database specific application programming interfaces (APIs) for SQL databases. The APIs consist of a package of modules providing access to each table row and column. Methods for retrieving, updating and saving entries are provided, as well as other generally useful methods (such as retrieval of the highest numbered entry in a table). MODULEWRITER provides for the inclusion of user-written code, which can be preserved across multiple runs of the MODULEWRITER program.

  7. Visual programming for next-generation sequencing data analytics.

    Science.gov (United States)

    Milicchio, Franco; Rose, Rebecca; Bian, Jiang; Min, Jae; Prosperi, Mattia

    2016-01-01

    High-throughput or next-generation sequencing (NGS) technologies have become an established and affordable experimental framework in biological and medical sciences for all basic and translational research. Processing and analyzing NGS data is challenging. NGS data are big, heterogeneous, sparse, and error prone. Although a plethora of tools for NGS data analysis has emerged in the past decade, (i) software development is still lagging behind data generation capabilities, and (ii) there is a 'cultural' gap between the end user and the developer. Generic software template libraries specifically developed for NGS can help in dealing with the former problem, whilst coupling template libraries with visual programming may help with the latter. Here we scrutinize the state-of-the-art low-level software libraries implemented specifically for NGS and graphical tools for NGS analytics. An ideal developing environment for NGS should be modular (with a native library interface), scalable in computational methods (i.e. serial, multithread, distributed), transparent (platform-independent), interoperable (with external software interface), and usable (via an intuitive graphical user interface). These characteristics should facilitate both the run of standardized NGS pipelines and the development of new workflows based on technological advancements or users' needs. We discuss in detail the potential of a computational framework blending generic template programming and visual programming that addresses all of the current limitations. In the long term, a proper, well-developed (although not necessarily unique) software framework will bridge the current gap between data generation and hypothesis testing. This will eventually facilitate the development of novel diagnostic tools embedded in routine healthcare.

  8. Technology Innovations from NASA's Next Generation Launch Technology Program

    Science.gov (United States)

    Cook, Stephen A.; Morris, Charles E. K., Jr.; Tyson, Richard W.

    2004-01-01

    NASA's Next Generation Launch Technology Program has been on the cutting edge of technology, improving the safety, affordability, and reliability of future space-launch-transportation systems. The array of projects focused on propulsion, airframe, and other vehicle systems. Achievements range from building miniature fuel/oxygen sensors to hot-firings of major rocket-engine systems as well as extreme thermo-mechanical testing of large-scale structures. Results to date have significantly advanced technology readiness for future space-launch systems using either airbreathing or rocket propulsion.

  9. Next Generation Space Telescope ultra-lightweight mirror program

    CERN Document Server

    Bilbro, J W

    1999-01-01

    The Next Generation Space Telescope is currently envisioned as an eight meter diameter cryogenic deployable telescope that will operate at the Earth sun libration point L2. A number of different designs are being examined within $9 NASA and under industry studies by Ball Aerospace, Lockheed-Martin and TRW. Although these designs differ in many respects, they all require significant advancements in the state-of-the-art with respect to large diameter, $9 ultra-lightweight, mirrors. The purpose of this paper is to provide insight into the current status of the mirror development program. (1 refs).

  10. Next Generation Nuclear Plant Methods Technical Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    Richard R. Schultz; Abderrafi M. Ougouag; David W. Nigg; Hans D. Gougar; Richard W. Johnson; William K. Terry; Chang H. Oh; Donald W. McEligot; Gary W. Johnsen; Glenn E. McCreery; Woo Y. Yoon; James W. Sterbentz; J. Steve Herring; Temitope A. Taiwo; Thomas Y. C. Wei; William D. Pointer; Won S. Yang; Michael T. Farmer; Hussein S. Khalil; Madeline A. Feltus

    2010-12-01

    One of the great challenges of designing and licensing the Very High Temperature Reactor (VHTR) is to confirm that the intended VHTR analysis tools can be used confidently to make decisions and to assure all that the reactor systems are safe and meet the performance objectives of the Generation IV Program. The research and development (R&D) projects defined in the Next Generation Nuclear Plant (NGNP) Design Methods Development and Validation Program will ensure that the tools used to perform the required calculations and analyses can be trusted. The Methods R&D tasks are designed to ensure that the calculational envelope of the tools used to analyze the VHTR reactor systems encompasses, or is larger than, the operational and transient envelope of the VHTR itself. The Methods R&D focuses on the development of tools to assess the neutronic and thermal fluid behavior of the plant. The fuel behavior and fission product transport models are discussed in the Advanced Gas Reactor (AGR) program plan. Various stress analysis and mechanical design tools will also need to be developed and validated and will ultimately also be included in the Methods R&D Program Plan. The calculational envelope of the neutronics and thermal-fluids software tools intended to be used on the NGNP is defined by the scenarios and phenomena that these tools can calculate with confidence. The software tools can only be used confidently when the results they produce have been shown to be in reasonable agreement with first-principle results, thought-problems, and data that describe the “highly ranked” phenomena inherent in all operational conditions and important accident scenarios for the VHTR.

  11. Next Generation Nuclear Plant Methods Technical Program Plan -- PLN-2498

    Energy Technology Data Exchange (ETDEWEB)

    Richard R. Schultz; Abderrafi M. Ougouag; David W. Nigg; Hans D. Gougar; Richard W. Johnson; William K. Terry; Chang H. Oh; Donald W. McEligot; Gary W. Johnsen; Glenn E. McCreery; Woo Y. Yoon; James W. Sterbentz; J. Steve Herring; Temitope A. Taiwo; Thomas Y. C. Wei; William D. Pointer; Won S. Yang; Michael T. Farmer; Hussein S. Khalil; Madeline A. Feltus

    2010-09-01

    One of the great challenges of designing and licensing the Very High Temperature Reactor (VHTR) is to confirm that the intended VHTR analysis tools can be used confidently to make decisions and to assure all that the reactor systems are safe and meet the performance objectives of the Generation IV Program. The research and development (R&D) projects defined in the Next Generation Nuclear Plant (NGNP) Design Methods Development and Validation Program will ensure that the tools used to perform the required calculations and analyses can be trusted. The Methods R&D tasks are designed to ensure that the calculational envelope of the tools used to analyze the VHTR reactor systems encompasses, or is larger than, the operational and transient envelope of the VHTR itself. The Methods R&D focuses on the development of tools to assess the neutronic and thermal fluid behavior of the plant. The fuel behavior and fission product transport models are discussed in the Advanced Gas Reactor (AGR) program plan. Various stress analysis and mechanical design tools will also need to be developed and validated and will ultimately also be included in the Methods R&D Program Plan. The calculational envelope of the neutronics and thermal-fluids software tools intended to be used on the NGNP is defined by the scenarios and phenomena that these tools can calculate with confidence. The software tools can only be used confidently when the results they produce have been shown to be in reasonable agreement with first-principle results, thought-problems, and data that describe the “highly ranked” phenomena inherent in all operational conditions and important accident scenarios for the VHTR.

  12. Chemistry technician performance evaluation program Palo Verde Nuclear Generating Station

    International Nuclear Information System (INIS)

    Shawver, J.M.

    1992-01-01

    The Arizona Nuclear Power Project (ANPP), a three-reactor site located 50 miles west of Phoenix, Arizona, has developed and implemented a program for evaluating individual chemistry technician analytical performance on a routine basis. About 45 chemistry technicians are employed at the site, 15 at each operating unit. The technicians routinely perform trace level analyses for impurities of concern to PWRs. Each month a set of blind samples is provided by an outside vendor. The blind samples contain 16 parameters which are matrixed to approximate the PWR's primary and secondary cycles. Nine technicians receive the samples, three from each operating unit, and perform the required analyses. Acceptance criteria for successful performance on the blind parameters is based on the values found in the Institute of Nuclear Power Operations (INPO) Document 83-016, Revision 2, August 1989, Chemistry Quality Control Program. The goal of the program is to have each technician demonstrate acceptable performance on each of 16 analytical parameters. On completion of each monthly set, a summary report of all of the analytical results for the sample set is prepared. From the summary report, analytical bias can be detected, technician performance is documented, and overall laboratory performance can be evaluated. The program has been very successful at satisfying the INPO requirement that the analytical performance of each individual technician should be checked on at least a six-month frequency for all important parameters measured. This paper describes the program as implemented at the Palo Verde Nuclear Generating Station and provides a summary report and trend and bias graphs for illustrative purposes

  13. Quality assurance program document for 75 mW radioisotope thermoelectric generator program

    International Nuclear Information System (INIS)

    Gregory, B.M.

    1977-09-01

    The General Atomic Company Quality Assurance Document (QAPD) for the 75 mW Radioisotope Thermoelectric Generator (RTG) Program serves the following purposes: (1) identifies the QA Manual and special requirements for the Quality Assurance Program for the design, fabrication assembly, testing, and delivery of the 5 75-mW RTG's and the 2 75-mW Electrical Thermoelectric Generators (ETG) Test Units in accordance with the contractural requirements; (2) describes the operating agreements and relationships between GA and other participants on quality assurance matters on the program; (3) identifies the equipment and activities subject to the Quality Assurance Program and defines GA's scope of supply and documentation requirements for retention and delivery to the Customer; (4) identifies the personnel in key positions, assigned the responsibility for defining, approving, and implementing the QA program; (5) provides a document in which special quality assurance requirements or procedures may be described or identified for implementation during the program; and provides a controlled and identified document to which the customer may refer in signifying their approval of the quality assurance program that will be implemented by GA for the items within the scope of supply

  14. A reliability program for emergency diesel generators at nuclear power plants: Program structure

    International Nuclear Information System (INIS)

    Lofgren, E.V.; DeMoss, G.M.; Fragola, J.R.; Appignani, P.L.; Delarche, G.; Boccio, J.

    1988-04-01

    The purpose of this report is to provide technical guidelines for NRC staff use in the development of positions for evaluating emergency diesel generator (EDG) reliability programs. Such reviews will likely result following resolution of USI A-44 and GSI B-56. The diesel generator reliability program is a management system for achieving and maintaining a selected (or target) level of reliability. This can be achieved by: (1) understanding the factors that control the EDG reliability and (2) then applying reliability and maintenance techniques in the proper proportion to achieve selected performance goals. The concepts and guidelines discussed in this report are concepts and approaches that have been successful in applications where high levels of reliability must be maintained. Both an EDG reliability program process and a set of review items for NRC use are provided. The review items represent a checklist for reviewing EDG reliability programs. They do not, in themselves, constitute a reliability program. Rather, the review items are those distinctive features of a reliability program that must be present for the program to be effective

  15. U.S. Advanced Materials Development Program for steam generators

    International Nuclear Information System (INIS)

    Patriarca, P.; Harkness, S.D.; Duke, J.M.

    1975-01-01

    The selection of construction materials for LMFBR steam generators is reviewed, presenting the advantages and limitations of 2 1 / 2 Cr-1 Mo steel selected for the Clinch River Breeder Reactor Plant. These limitations indicate that further development of high-strength ferritic steels containing 9 to 12 percent Cr and the high-nickel Alloy 800 could lead to superior materials, and programs to develop these materials have been started. Combustion Engineering has surveyed the experience with the high-strength ferritic steels and prepared ingots of 26 selected compositions. Charpy V-notch tests and metallography have been used to characterize these alloys, and optimum welding rod compositions for these alloys are under development. Westinghouse-Tampa is undertaking a program to gain code acceptance of Alloy 800. A program has been set up to provide the information required for design, justification, and fabrication of reliable components. Progress has been made on characterization, the role of tertiary creep in failure, and the development of welding processes. (U.S.)

  16. Next Generation Nuclear Plant Materials Research and Development Program Plan

    International Nuclear Information System (INIS)

    G.O. Hayner; R.L. Bratton; R.N. Wright

    2005-01-01

    The U.S Department of Energy (DOE) has selected the Very High Temperature Reactor (VHTR) design for the Next Generation Nuclear Plant (NGNP) Project. The NGNP will demonstrate the use of nuclear power for electricity and hydrogen production without greenhouse gas emissions. The reactor design will be a graphite moderated, helium-cooled, prismatic or pebble-bed, thermal neutron spectrum reactor that will produce electricity and hydrogen in a state-of-the-art thermodynamically efficient manner. The NGNP will use very high burn-up, low-enriched uranium, TRISO-coated fuel and have a projected plant design service life of 60 years. The VHTR concept is considered to be the nearest-term reactor design that has the capability to efficiently produce hydrogen. The plant size, reactor thermal power, and core configuration will ensure passive decay heat removal without fuel damage or radioactive material releases during accidents. The NGNP Project is envisioned to demonstrate the following: (1) A full-scale prototype VHTR by about 2021; (2) High-temperature Brayton Cycle electric power production at full scale with a focus on economic performance; (3) Nuclear-assisted production of hydrogen (with about 10% of the heat) with a focus on economic performance; and (4) By test, the exceptional safety capabilities of the advanced gas-cooled reactors. Further, the NGNP program will: (1) Obtain a Nuclear Regulatory Commission (NRC) License to construct and operate the NGNP, this process will provide a basis for future performance based, risk-informed licensing; and (2) Support the development, testing, and prototyping of hydrogen infrastructures. The NGNP Materials Research and Development (R and D) Program is responsible for performing R and D on likely NGNP materials in support of the NGNP design, licensing, and construction activities. The NGNP Materials R and D Program includes the following elements: (1) Developing a specific approach, program plan and other project management

  17. Next Generation Nuclear Plant Materials Research and Development Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    G.O. Hayner; R.L. Bratton; R.N. Wright

    2005-09-01

    The U.S Department of Energy (DOE) has selected the Very High Temperature Reactor (VHTR) design for the Next Generation Nuclear Plant (NGNP) Project. The NGNP will demonstrate the use of nuclear power for electricity and hydrogen production without greenhouse gas emissions. The reactor design will be a graphite moderated, helium-cooled, prismatic or pebble-bed, thermal neutron spectrum reactor that will produce electricity and hydrogen in a state-of-the-art thermodynamically efficient manner. The NGNP will use very high burn-up, low-enriched uranium, TRISO-coated fuel and have a projected plant design service life of 60 years. The VHTR concept is considered to be the nearest-term reactor design that has the capability to efficiently produce hydrogen. The plant size, reactor thermal power, and core configuration will ensure passive decay heat removal without fuel damage or radioactive material releases during accidents. The NGNP Project is envisioned to demonstrate the following: (1) A full-scale prototype VHTR by about 2021; (2) High-temperature Brayton Cycle electric power production at full scale with a focus on economic performance; (3) Nuclear-assisted production of hydrogen (with about 10% of the heat) with a focus on economic performance; and (4) By test, the exceptional safety capabilities of the advanced gas-cooled reactors. Further, the NGNP program will: (1) Obtain a Nuclear Regulatory Commission (NRC) License to construct and operate the NGNP, this process will provide a basis for future performance based, risk-informed licensing; and (2) Support the development, testing, and prototyping of hydrogen infrastructures. The NGNP Materials Research and Development (R&D) Program is responsible for performing R&D on likely NGNP materials in support of the NGNP design, licensing, and construction activities. The NGNP Materials R&D Program includes the following elements: (1) Developing a specific approach, program plan and other project management tools for

  18. Clean Diesel Engine Component Improvement Program Diesel Truck Thermoelectric Generator

    Energy Technology Data Exchange (ETDEWEB)

    Elsner, N. B. [Hi-Z Technology, Inc., San Diego, CA (United States); Bass, J. C. [Hi-Z Technology, Inc., San Diego, CA (United States); Ghamaty, S. [Hi-Z Technology, Inc., San Diego, CA (United States); Krommenhoek, D. [Hi-Z Technology, Inc., San Diego, CA (United States); Kushch, A. [Hi-Z Technology, Inc., San Diego, CA (United States); Snowden, D. [Hi-Z Technology, Inc., San Diego, CA (United States); Marchetti, S. [Hi-Z Technology, Inc., San Diego, CA (United States)

    2005-03-16

    Hi-Z Technology, Inc. (Hi-Z) is currently developing four different auxiliary generator designs that are used to convert a portion (5 to 20%) of the waste heat from vehicle engines exhaust directly to electricity. The four designs range from 200 Watts to 10 kW. The furthest along is the 1 kW Diesel Truck Thermoelectric Generator (DTTEG) for heavy duty Class 8 Diesel trucks, which, under this program, has been subjected to 543,000 equivalent miles of bouncing and jarring on PACCAR's test track. Test experience on an earlier version of the DTTEG on the same track showed the need for design modifications incorporated in DTTEG Mod 2, such as a heavy duty shock mounting system and reinforcement of the electrical leads mounting system, the thermocouple mounting system and the thermoelectric module restraints. The conclusion of the 543,000 mile test also pointed the way for an upgrading to heavy duty hose or flex connections for the internal coolant connections for the TEG, and consideration of a separate lower temperature cooling loop with its own radiator. Fuel savings of up to $750 per year and a three to five year payback are believed to be possible with the 5 % efficiency modules. The economics are expected to improve considerably to approach a two year payback when the 5 kW to 10 kW generators make it to the market in a few years with a higher efficiency (20%) thermoelectric module system called Quantum Wells, which are currently under development by Hi-Z. Ultimately, as automation takes over to reduce material and labor costs in the high volume production of QW modules, a one year payback for the 5 kW to10 kW generator appears possible. This was one of the stated goals at the beginning of the project. At some future point in time, with the DTTEG becoming standard equipment on all trucks and automobiles, fuel savings from the 25% conversion of exhaust heat to useable electricity nationwide equates to a 10% reduction in the 12 to 15 million barrels per day of

  19. Next Generation Nuclear Plant Research and Development Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    P. E. MacDonald

    2005-01-01

    The U.S Department of Energy (DOE) is conducting research and development (R&D) on the Very High Temperature Reactor (VHTR) design concept for the Next Generation Nuclear Plant (NGNP) Project. The reactor design will be a graphite moderated, thermal neutron spectrum reactor that will produce electricity and hydrogen in a highly efficient manner. The NGNP reactor core could be either a prismatic graphite block type core or a pebble bed core. Use of a liquid salt coolant is also being evaluated. The NGNP will use very high-burnup, low-enriched uranium, TRISO-coated fuel, and have a projected plant design service life of 60 years. The VHTR concept is considered to be the nearest-term reactor design that has the capability to efficiently produce hydrogen. The plant size, reactor thermal power, and core configuration will ensure passive decay heat removal without fuel damage or radioactive material releases during accidents. The objectives of the NGNP Project are to: Demonstrate a full-scale prototype VHTR that is commercially licensed by the U.S. Nuclear Regulatory Commission Demonstrate safe and economical nuclearassisted production of hydrogen and electricity. The DOE laboratories, led by the INL, will perform R&D that will be critical to the success of the NGNP, primarily in the areas of: High temperature gas reactor fuels behavior High temperature materials qualification Design methods development and validation Hydrogen production technologies Energy conversion. The current R&D work is addressing fundamental issues that are relevant to a variety of possible NGNP designs. This document describes the NGNP R&D planned and currently underway in the first three topic areas listed above. The NGNP Advanced Gas Reactor (AGR) Fuel Development and Qualification Program is presented in Section 2, the NGNP Materials R&D Program Plan is presented in Section 3, and the NGNP Design Methods Development and Validation R&D Program is presented in Section 4. The DOE-funded hydrogen

  20. Next Generation Nuclear Plant Research and Development Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    None

    2005-01-01

    The U.S Department of Energy (DOE) is conducting research and development (R&D) on the Very High Temperature Reactor (VHTR) design concept for the Next Generation Nuclear Plant (NGNP) Project. The reactor design will be a graphite moderated, thermal neutron spectrum reactor that will produce electricity and hydrogen in a highly efficient manner. The NGNP reactor core could be either a prismatic graphite block type core or a pebble bed core. Use of a liquid salt coolant is also being evaluated. The NGNP will use very high-burnup, low-enriched uranium, TRISO-coated fuel, and have a projected plant design service life of 60 years. The VHTR concept is considered to be the nearest-term reactor design that has the capability to efficiently produce hydrogen. The plant size, reactor thermal power, and core configuration will ensure passive decay heat removal without fuel damage or radioactive material releases during accidents. The objectives of the NGNP Project are to: (1) Demonstrate a full-scale prototype VHTR that is commercially licensed by the U.S. Nuclear Regulatory Commission (2) Demonstrate safe and economical nuclear-assisted production of hydrogen and electricity. The DOE laboratories, led by the INL, will perform R&D that will be critical to the success of the NGNP, primarily in the areas of: (1) High temperature gas reactor fuels behavior; (2) High temperature materials qualification; (3) Design methods development and validation; (4) Hydrogen production technologies; and (5) Energy conversion. The current R&D work is addressing fundamental issues that are relevant to a variety of possible NGNP designs. This document describes the NGNP R&D planned and currently underway in the first three topic areas listed above. The NGNP Advanced Gas Reactor (AGR) Fuel Development and Qualification Program is presented in Section 2, the NGNP Materials R&D Program Plan is presented in Section 3, and the NGNP Design Methods Development and Validation R&D Program is presented

  1. Steam Generator Tube Integrity Program: Surry Steam Generator Project, Hanford site, Richland, Benton County, Washington: Environmental assessment

    International Nuclear Information System (INIS)

    1980-03-01

    The US Nuclear Regulatory Commission (NRC) has placed a Nuclear Regulatory Research Order with the Richland Operations Office of the US Department of Energy (DOE) for expanded investigations at the DOE Pacific Northwest Laboratory (PNL) related to defective pressurized water reactor (PWR) steam generator tubing. This program, the Steam Generator Tube Integrity (SGTI) program, is sponsored by the Metallurgy and Materials Research Branch of the NRC Division of Reactor Safety Research. This research and testing program includes an additional task requiring extensive investigation of a degraded, out-of-service steam generator from a commercial nuclear power plant. This comprehensive testing program on an out-of-service generator will provide NRC with timely and valuable information related to pressurized water reactor primary system integrity and degradation with time. This report presents the environmental assessment of the removal, transport, and testing of the steam generator along with decontamination/decommissioning plans

  2. ADIFOR–Generating Derivative Codes from Fortran Programs

    Directory of Open Access Journals (Sweden)

    Christian Bischof

    1992-01-01

    Full Text Available The numerical methods employed in the solution of many scientific computing problems require the computation of derivatives of a function f Rn→Rm. Both the accuracy and the computational requirements of the derivative computation are usually of critical importance for the robustness and speed of the numerical solution. Automatic Differentiation of FORtran (ADIFOR is a source transformation tool that accepts Fortran 77 code for the computation of a function and writes portable Fortran 77 code for the computation of the derivatives. In contrast to previous approaches, ADIFOR views automatic differentiation as a source transformation problem. ADIFOR employs the data analysis capabilities of the ParaScope Parallel Programming Environment, which enable us to handle arbitrary Fortran 77 codes and to exploit the computational context in the computation of derivatives. Experimental results show that ADIFOR can handle real-life codes and that ADIFOR-generated codes are competitive with divided-difference approximations of derivatives. In addition, studies suggest that the source transformation approach to automatic differentiation may improve the time to compute derivatives by orders of magnitude.

  3. The General Electric MOD-1 wind turbine generator program

    Science.gov (United States)

    Poor, R. H.; Hobbs, R. B.

    1979-01-01

    The design, fabrication, installation and checkout of MOD-1, a megawatt class wind turbine generator which generates utility grade electrical power, is described. A MOD-1/MOD-1A tradeoff study is discussed.

  4. Development of a computer program to predict structural integrity against fretting wear of steam generator tubes: PIAT (program for integrity assessment of steam generator tubes)

    International Nuclear Information System (INIS)

    Park, Chi-Yong; Ryu, Ki-Wahn; Rhee, Huinam

    2013-01-01

    Highlights: ► We develop a computer code to assess the structural integrity of steam generator tubes. ► Flow-induced vibration of whole steam generator tubes can be analyzed systematically. ► The wear map is obtained to predict the wear depth of whole steam generator tubes. ► The structural integrity of steam generator tubes can be improved significantly. -- Abstract: Flow induced vibration of steam generator tubes potentially causes excessive fretting wear at the supports such as anti-vibration bars and tube support plates. For a reliable design of tubes against the flow-induced vibration related failure, the prediction of vibration and wear of tubes should be performed through complicated steps including the thermal-hydraulic analysis, dynamic modal analysis, evaluation of fluid-elastic instability, prediction of turbulence-induced vibration and wear depth for thousands of tubes. However, entire tubes cannot be evaluated within a limited time of design engineering by the conventional analysis methodology. In this paper, we describe an efficient computer program to assess the structural integrity of steam generator tubes against the flow-induced vibration related failure in a very systematic way. The program contains all the necessary thermal-hydraulic database of typical steam generators. It has a very special function to perform modal analysis for all thousands of tubes of a steam generator much faster than the conventional method. The program also performs fluid-elastic instability analysis and calculates the vibrational response to the turbulent flow excitation, and then can predict the wear depth for all tubes of a steam generator. Finally, we can generate the wear prediction map for whole tubes so that an efficient and practical steam generator maintenance management program is feasible. The utilization of the developed computer program for the design and maintenance of steam generators can significantly increase the structural integrity of steam

  5. Visual Programming and Music Score Generation with OpenMusic

    OpenAIRE

    Bresson, Jean; Agon, Carlos

    2011-01-01

    cote interne IRCAM: Bresson11d; None / None; National audience; We present score programming features in the visual programming and computer-aided composition environment OpenMusic. The sheet object allows to build complex scores and fill or modify their contents algorithmically using visual programs.

  6. Life Cycle Systems Engineering Approach to NASA's 2nd Generation Reusable Launch Vehicle

    Science.gov (United States)

    Thomas, Dale; Smith, Charles; Safie, Fayssal; Kittredge, Sheryl

    2002-01-01

    The overall goal of the 2nd Generation RLV Program is to substantially reduce technical and business risks associated with developing a new class of reusable launch vehicles. NASA's specific goals are to improve the safety of a 2nd- generation system by 2 orders of magnitude - equivalent to a crew risk of 1 -in- 10,000 missions - and decrease the cost tenfold, to approximately $1,000 per pound of payload launched. Architecture definition is being conducted in parallel with the maturating of key technologies specifically identified to improve safety and reliability, while reducing operational costs. An architecture broadly includes an Earth-to-orbit reusable launch vehicle, on-orbit transfer vehicles and upper stages, mission planning, ground and flight operations, and support infrastructure, both on the ground and in orbit. The systems engineering approach ensures that the technologies developed - such as lightweight structures, long-life rocket engines, reliable crew escape, and robust thermal protection systems - will synergistically integrate into the optimum vehicle. Given a candidate architecture that possesses credible physical processes and realistic technology assumptions, the next set of analyses address the system's functionality across the spread of operational scenarios characterized by the design reference missions. The safety/reliability and cost/economics associated with operating the system will also be modeled and analyzed to answer the questions "How safe is it?" and "How much will it cost to acquire and operate?" The systems engineering review process factors in comprehensive budget estimates, detailed project schedules, and business and performance plans, against the goals of safety, reliability, and cost, in addition to overall technical feasibility. This approach forms the basis for investment decisions in the 2nd Generation RLV Program's risk-reduction activities. Through this process, NASA will continually refine its specialized needs and

  7. Computer program for automatic generation of BWR control rod patterns

    International Nuclear Information System (INIS)

    Taner, M.S.; Levine, S.H.; Hsia, M.Y.

    1990-01-01

    A computer program named OCTOPUS has been developed to automatically determine a control rod pattern that approximates some desired target power distribution as closely as possible without violating any thermal safety or reactor criticality constraints. The program OCTOPUS performs a semi-optimization task based on the method of approximation programming (MAP) to develop control rod patterns. The SIMULATE-E code is used to determine the nucleonic characteristics of the reactor core state

  8. Calibration of ADRET voltage generator type CV102. Program CODAV

    International Nuclear Information System (INIS)

    Lagarde, Gerard.

    1978-07-01

    The CODAV programm studied by the Metrology SES/SME laboratory is used for the calibration of ADRET voltage generator type CV.102. A JCAM.10 microcomputer run the measurement cycle and the printout of the results [fr

  9. Slurry steam generator program and baseline eddy current examination

    International Nuclear Information System (INIS)

    Clark, R.A.; Doctor, P.G.

    1985-01-01

    The Steam Generator Group Project was initiated in January 1982 with formation of consortium including NRC, EPRI, Japanese, French, and Italian participants. The project utilizes a retired-from-service nuclear steam generator established in a specially designed facility which houses the unit in its normal vertical operating position. The most important objectives deal with validation of nondestructive examination (NDE) techniques used to characterize steam generators during service. This research generator offers the first opportunity to characterize a statistically significant number of service-induced defects nondestructively followed by destructive metallographic confirmation. The project seeks to establish the reliability of defect detection and the accuracy of sizing defects via current state-of-the-art NDE. Other service degraded tubes will be burst tested to establish remaining service integrity. The integrity information and NDE reliability results will serve as inputs to establish a model for steam generator in-service inspections, and provide a data base for evaluation of tube plugging criteria. In addition to NDE validation goals, the project will use the service degraded generator as a specimen for demonstration/proof testing of repair and maintenance techniques, including chemical cleaning/decontamination technologies. In addition to the efforts associated with NDE, a multitude of other project tasks have continued through 1984, and results are presented

  10. Hanford site guide for preparing and maintaining generator group pollution prevention program documentation

    International Nuclear Information System (INIS)

    1995-12-01

    This manual provides the necessary guidance to contractor generator groups for developing and maintaining documentation of their pollution prevention (P2) program activities. Preparation of program documentation will demonstrate compliance with contractor and U.S. Department of Energy (DOE) requirements, as well as state and federal regulations. Contractor waste generator groups are no longer required to prepare and update facility waste minimization plans. Developing and maintaining program documentation replace this requirement

  11. DWPF CATALYTIC HYDROGEN GENERATION PROGRAM - REVIEW OF CURRENT STATUS

    Energy Technology Data Exchange (ETDEWEB)

    Koopman, D.

    2009-07-10

    Significant progress has been made in the past two years in improving the understanding of acid consumption and catalytic hydrogen generation during the Defense Waste Processing Facility (DWPF) processing of waste sludges in the Sludge Receipt and Adjustment Tank (SRAT) and Slurry Mix Evaporator (SME). This report reviews issues listed in prior internal reviews, describes progress with respect to the recommendations made by the December 2006 external review panel, and presents a summary of the current understanding of catalytic hydrogen generation in the DWPF Chemical Process Cell (CPC). Noble metals, such as Pd, Rh, and Ru, are historically known catalysts for the conversion of formic acid into hydrogen and carbon dioxide. Rh, Ru, and Pd are present in the DWPF SRAT feed as by-products of thermal neutron fission of {sup 235}U in the original waste. Rhodium appears to become most active for hydrogen as the nitrite ion concentration becomes low (within a factor of ten of the Rh concentration). Prior to hydrogen generation, Rh is definitely active for nitrite destruction to N{sub 2}O and potentially active for nitrite to NO formation. These reactions are all consistent with the presence of a nitro-Rh complex catalyst, although definite proof for the existence of this complex during Savannah River Site (SRS) waste processing does not exist. Ruthenium does not appear to become active for hydrogen generation until nitrite destruction is nearly complete (perhaps less nitrite than Ru in the system). Catalytic activity of Ru during nitrite destruction is significantly lower than that of either Rh or Pd. Ru appears to start activating as Rh is deactivating from its maximum catalytic activity for hydrogen generation. The slow activation of the Ru, as inferred from the slow rate of increase in hydrogen generation that occurs after initiation, may imply that some species (perhaps Ru itself) has some bound nitrite on it. Ru, rather than Rh, is primarily responsible for the

  12. Fetal Programming of Infant Neuromotor Development: The Generation R Study

    NARCIS (Netherlands)

    van Batenburg-Eddes, T.; de Groot, L.; Steegers, E.A.P.; Hofman, A.; Jaddoe, V.W.V.; Verhulst, F.C.; Tiemeier, H.

    2010-01-01

    The objective of the study was to examine whether infant neuromotor development is determined by fetal size and body symmetry in the general population. This study was embedded within the Generation R Study, a population-based cohort in Rotterdam. In 2965 fetuses, growth parameters were measured in

  13. GenOVa: a computer program to generate orientational variants

    OpenAIRE

    Cayron, Cyril

    2007-01-01

    A computer program called GenOVa, written in Python, calculates the orientational variants, the operators (special types of misorientations between variants) and the composition table associated with a groupoid structure. The variants can be represented by three-dimensional shapes or by pole figures.

  14. Transire, a Program for Generating Solid-State Interface Structures

    Science.gov (United States)

    2017-09-14

    gallium nitride/silicon carbide interface. 15. SUBJECT TERMS crystalline interface, electron transport, python , computational chemistry, grain boundary...crystal interfaces. 2) Limited and easy-to-use input requirements to minimize the learning curve for users with less experience using computers. 3...advantage of future developments in the computational chemistry community. 3. Method of Solution Transire*, a program written using the Python

  15. Generator of text-based assignments for programming courses

    OpenAIRE

    Jager, Mojca

    2013-01-01

    Verifying and assessing of knowledge represent important part of education. A teacher can verify knowledge on different ways, like classically oral and written, which are in majority still dominant types, and alternatively, which is based on student's current activities. During assembling the questions for written verification, many teachers nowadays help themselves using different test generators like Hot Potatoes, Moodle, Test Pilot, and others, they are all available on internet. At t...

  16. Generative Programming for Functional Safety in Mobile Robots

    DEFF Research Database (Denmark)

    Adam, Marian Sorin

    2018-01-01

    be explicitly declared separately from the main program. Rather than addressing the individual functionality of specific components, we address the functionality of the system as a whole in terms of externally observable properties of individual components, their communication, and the state of the surrounding...... reliability and safety of the robot, yet reducing the risk of errors by making the software resilient is both complicated and expensive, notably if functional safety requirements have to be fulfilled. A commercially successful robot has to remain safe while providing as much as possible from the functionality...... safety specifications easily understandable has been investigated by recasting the concept of spreadsheets as DSL programming environments, a concept we refer to as spreadsheet-based DSLs (SDSLs). We have developed a DSL named Spreadsheet Grammar Language (SGL) designed to be a systematic tool...

  17. Prototype steam generator test at SCTI/ETEC. Acoustic program test plan

    International Nuclear Information System (INIS)

    Greene, D.A.; Thiele, A.; Claytor, T.N.

    1981-10-01

    This document is an integrated test plan covering programs at General Electric (ARSD), Rockwell International (RI) and Argonne National Laboratory (CT). It provides an overview of the acoustic leak detection test program which will be completed in conjunction with the prototype LMFBR steam generator at the Energy Technology Engineering Laboratory. The steam generator is installed in the Sodium Components Test Installation (SCTI). Two acoustic detection systems will be used during the test program, a low frequency system developed by GE-ARSD (GAAD system) and a high frequency system developed by RI-AI (HALD system). These systems will be used to acquire data on background noise during the thermal-hydraulic test program. Injection devices were installed during fabrication of the prototype steam generator to provide localized noise sources in the active region of the tube bundle. These injectors will be operated during the steam generator test program, and it will be shown that they are detected by the acoustic systems

  18. A Case for Dynamic Reverse-code Generation to Debug Non-deterministic Programs

    Directory of Open Access Journals (Sweden)

    Jooyong Yi

    2013-09-01

    Full Text Available Backtracking (i.e., reverse execution helps the user of a debugger to naturally think backwards along the execution path of a program, and thinking backwards makes it easy to locate the origin of a bug. So far backtracking has been implemented mostly by state saving or by checkpointing. These implementations, however, inherently do not scale. Meanwhile, a more recent backtracking method based on reverse-code generation seems promising because executing reverse code can restore the previous states of a program without state saving. In the literature, there can be found two methods that generate reverse code: (a static reverse-code generation that pre-generates reverse code through static analysis before starting a debugging session, and (b dynamic reverse-code generation that generates reverse code by applying dynamic analysis on the fly during a debugging session. In particular, we espoused the latter one in our previous work to accommodate non-determinism of a program caused by e.g., multi-threading. To demonstrate the usefulness of our dynamic reverse-code generation, this article presents a case study of various backtracking methods including ours. We compare the memory usage of various backtracking methods in a simple but nontrivial example, a bounded-buffer program. In the case of non-deterministic programs such as this bounded-buffer program, our dynamic reverse-code generation outperforms the existing backtracking methods in terms of memory efficiency.

  19. Next Generation Nuclear Plant Materials Research and Development Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    G. O. Hayner; E.L. Shaber

    2004-09-01

    The U.S Department of Energy (DOE) has selected the Very High Temperature Reactor (VHTR) design for the Next Generation Nuclear Plant (NGNP) Project. The NGNP will demonstrate the use of nuclear power for electricity and hydrogen production without greenhouse gas emissions. The reactor design will be a graphite moderated, helium-cooled, prismatic or pebble-bed, thermal neutron spectrum reactor that will produce electricity and hydrogen in a state-of-the-art thermodynamically efficient manner. The NGNP will use very high burn-up, low-enriched uranium, TRISO-coated fuel and have a projected plant design service life of 60 years.

  20. Next Generation Nuclear Plant Materials Selection and Qualification Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    R. Doug Hamelin; G. O. Hayner

    2004-11-01

    The U.S. Department of Energy (DOE) has selected the Very High Temperature Reactor (VHTR) design for the Next Generation Nuclear Plant (NGNP) Project. The NGNP will demonstrate the use of nuclear power for electricity and hydrogen production without greenhouse gas emissions. The reactor design is a graphite-moderated, helium-cooled, prismatic or pebble bed thermal neutron spectrum reactor with an average reactor outlet temperature of at least 1000 C. The NGNP will use very high burn up, lowenriched uranium, TRISO-Coated fuel in a once-through fuel cycle. The design service life of the NGNP is 60 years.

  1. Verification of Java Programs using Symbolic Execution and Invariant Generation

    Science.gov (United States)

    Pasareanu, Corina; Visser, Willem

    2004-01-01

    Software verification is recognized as an important and difficult problem. We present a norel framework, based on symbolic execution, for the automated verification of software. The framework uses annotations in the form of method specifications an3 loop invariants. We present a novel iterative technique that uses invariant strengthening and approximation for discovering these loop invariants automatically. The technique handles different types of data (e.g. boolean and numeric constraints, dynamically allocated structures and arrays) and it allows for checking universally quantified formulas. Our framework is built on top of the Java PathFinder model checking toolset and it was used for the verification of several non-trivial Java programs.

  2. Foreign Material Exclusion Program at CNE Cernavoda Nuclear Generating Station

    International Nuclear Information System (INIS)

    Urjan, Daniel

    2008-01-01

    In the face of a continuing attention to operations and maintenance costs at nuclear power plants, the future of the industry depends largely upon increasing plant availability and improving operating efficiency. The success in achieving these objectives is dependent upon the success of each plant's equipment maintenance program. Preventing the introduction of foreign materials into a nuclear power plant system or component requires a careful, thoughtful, and professional approach by all site personnel. This paper describes a proactive approach to prevent the introduction of foreign material into systems and components, by providing an overview of technical considerations required to develop, implement, and manage a foreign material exclusion program at CNE Cernavoda Unit 1 and 2 Nuclear Power Station. It is also described an example of Foreign Material Intrusion which happened during the 2003 planned maintenance outage at Cernavoda Unit no.1. This paper also defines personnel responsibilities and key nomenclature and a means for evaluating prospective work tasks and activities against standardized criteria, in order to identify the appropriate level of the required FME controls. (author)

  3. Selenide isotope generator for the Galileo Mission. Program final report

    Energy Technology Data Exchange (ETDEWEB)

    1979-06-01

    This final report for the Selenide Isotope Generator for the Galileo Mission (SIG/GM) documents the work performed by Teledyne Energy Systems (TES) under US Department of Energy (DOE) Contract No. DE-AC01-78ET33009 (formerly ET-78-C-01-2865) during the period April 10, 1978 to June 30, 1979. Because of technical difficulties with the thermoelectric converter being developed by the 3M Company under separate DOE contract, a Stop Work Order, dated January 29, 1979, was issued by DOE. The TES effort up to the receipt of the Stop Work Order as well as limited technical activities up to the contract conclusion on June 30, 1979 are reported.

  4. Program Code Generator for Cardiac Electrophysiology Simulation with Automatic PDE Boundary Condition Handling.

    Directory of Open Access Journals (Sweden)

    Florencio Rusty Punzalan

    Full Text Available Clinical and experimental studies involving human hearts can have certain limitations. Methods such as computer simulations can be an important alternative or supplemental tool. Physiological simulation at the tissue or organ level typically involves the handling of partial differential equations (PDEs. Boundary conditions and distributed parameters, such as those used in pharmacokinetics simulation, add to the complexity of the PDE solution. These factors can tailor PDE solutions and their corresponding program code to specific problems. Boundary condition and parameter changes in the customized code are usually prone to errors and time-consuming. We propose a general approach for handling PDEs and boundary conditions in computational models using a replacement scheme for discretization. This study is an extension of a program generator that we introduced in a previous publication. The program generator can generate code for multi-cell simulations of cardiac electrophysiology. Improvements to the system allow it to handle simultaneous equations in the biological function model as well as implicit PDE numerical schemes. The replacement scheme involves substituting all partial differential terms with numerical solution equations. Once the model and boundary equations are discretized with the numerical solution scheme, instances of the equations are generated to undergo dependency analysis. The result of the dependency analysis is then used to generate the program code. The resulting program code are in Java or C programming language. To validate the automatic handling of boundary conditions in the program code generator, we generated simulation code using the FHN, Luo-Rudy 1, and Hund-Rudy cell models and run cell-to-cell coupling and action potential propagation simulations. One of the simulations is based on a published experiment and simulation results are compared with the experimental data. We conclude that the proposed program code

  5. Marketing of Revenue-Generating ESL Programs at the University of Calgary: A Qualitative Study

    Science.gov (United States)

    Eaton, Sarah Elaine

    2009-01-01

    This qualitative case study endeavored to understand how program managers at one post-secondary Canadian university define, understand and undertake the marketing of their revenue-generating English as a Second Language (ESL) programs. Data were collected through interviews with three managers of distinct English as a Second Language (ESL)…

  6. SLACINPT - a FORTRAN program that generates boundary data for the SLAC gun code

    International Nuclear Information System (INIS)

    Michel, W.L.; Hepburn, J.D.

    1982-03-01

    The FORTRAN program SLACINPT was written to simplify the preparation of boundary data for the SLAC gun code. In SLACINPT, the boundary is described by a sequence of straight line or arc segments. From these, the program generates the individual boundary mesh point data, required as input by the SLAC gun code

  7. Iran's nuclear program - for power generation or nuclear weapons?

    International Nuclear Information System (INIS)

    Kippe, Halvor

    2008-11-01

    would withdraw from the Nuclear Non-proliferation Treaty (NPT), has generated enough concern among several of the dominant nations in the world, that they have gone to great lengths to try to dissuade Tehran from the continued pursuit of its in principle legal nuclear activities. As this report is issued, Iran still has some way ahead before its infrastructure can readily provide it with nuclear weapons on demand. But Iran seems almost to have overcome the presumably highest technological threshold, namely full-scale uranium enrichment. Today's infrastructure is far from sufficiently developed to be able to fully support Iran's planned nuclear power developments, but on the other hand the need for indigenously produced nuclear fuel is also several years ahead, as long as Iran's first self-constructed nuclear power plant is far from completion. The known and assumed uranium deposits, however, are of minute proportions compared to the stated ambitions of their nuclear power programme (20 GWe within 2030). Iran's future reactors will hardly be able to go online before they become dependent on fuel from abroad. The uranium deposits are, on the other hand, abundant for the future production of several thousands of nuclear weapons. And if the infrastructure that is arising today is actually directed towards that purpose, Iran will in theory some day be able to produce more than a hundred nuclear weapons a year. (Author)

  8. Development of ANJOYMC Program for Automatic Generation of Monte Carlo Cross Section Libraries

    International Nuclear Information System (INIS)

    Kim, Kang Seog; Lee, Chung Chan

    2007-03-01

    The NJOY code developed at Los Alamos National Laboratory is to generate the cross section libraries in ACE format for the Monte Carlo codes such as MCNP and McCARD by processing the evaluated nuclear data in ENDF/B format. It takes long time to prepare all the NJOY input files for hundreds of nuclides with various temperatures, and there can be some errors in the input files. In order to solve these problems, ANJOYMC program has been developed. By using a simple user input deck, this program is not only to generate all the NJOY input files automatically, but also to generate a batch file to perform all the NJOY calculations. The ANJOYMC program is written in Fortran90 and can be executed under the WINDOWS and LINUX operating systems in Personal Computer. Cross section libraries in ACE format can be generated in a short time and without an error by using a simple user input deck

  9. Review of EPRI's steam generator R and D program

    Energy Technology Data Exchange (ETDEWEB)

    Millett, P.J.; Welty, C.J. [EPRI, Palo Alto, CA (United States)

    1998-07-01

    EPRI has carried out an extensive R and D program on SG technology since the mid 1970's. Very early efforts under the auspices of the Steam Generator Owners Group (SGOG) focused on developing remedial actions for the critical SG corrosion issues of denting, wastage and pitting. Fundamental work was also carried out in the development of thermal hydraulic models for vibration and wear, chemical cleaning and tube repair techniques. In the late 1980's and continuing through today, the program has shifted emphasis towards management of steam generator degradation, primarily stress corrosion cracking of the SG tubes on both the primary and secondary sides. The current Steam Generator Management Program (SGMP) carries out R and D in four areas; materials, chemistry, thermal hydraulics and non-destructive testing. The strategic goals of this program and projects put in place to achieve these goals will be reviewed in detail in this paper. (author)

  10. Regional decision-making and competitive funding : metropolitan planning organizations and the transportation investments generating economic recovery program.

    Science.gov (United States)

    2014-08-01

    Transportation benefits and economic stimulus were behind the creation of the Transportation Investment Generating Economic Recovery (TIGER) program in 2009. New transportation funding programs exist in a landscape of other programs, and in addition ...

  11. Generation of an Aerothermal Data Base for the X33 Spacecraft

    Science.gov (United States)

    Roberts, Cathy; Huynh, Loc

    1998-01-01

    The X-33 experimental program is a cooperative program between industry and NASA, managed by Lockheed-Martin Skunk Works to develop an experimental vehicle to demonstrate new technologies for a single-stage-to-orbit, fully reusable launch vehicle (RLV). One of the new technologies to be demonstrated is an advanced Thermal Protection System (TPS) being designed by BF Goodrich (formerly Rohr, Inc.) with support from NASA. The calculation of an aerothermal database is crucial to identifying the critical design environment data for the TPS. The NASA Ames X-33 team has generated such a database using Computational Fluid Dynamics (CFD) analyses, engineering analysis methods and various programs to compare and interpolate the results from the CFD and the engineering analyses. This database, along with a program used to query the database, is used extensively by several X-33 team members to help them in designing the X-33. This paper will describe the methods used to generate this database, the program used to query the database, and will show some of the aerothermal analysis results for the X-33 aircraft.

  12. Implementation status of performance demonstration program for steam generator tubing analysts in Korea

    International Nuclear Information System (INIS)

    Cho, Chan Hee; Lee, Hee Jong; Yoo, Hyun Ju; Nam, Min Woo; Hong, Sung Yull

    2013-01-01

    Some essential components in nuclear power plants are periodically inspected using non destructive examinations, for example ultrasonic, eddy current and radiographic examinations, in order to determine their integrity. These components include nuclear power plant items such as vessels, containments, piping systems, pumps, valves, tubes and core support structure. Steam generator tubes have an important safety role because they constitute one of the primary barriers between the radioactive and non radioactive sides of the nuclear power plant. There is potential that if a tube bursts while a plant is operating, radioactivity from the primary coolant system could escape directly to the atmosphere. Therefore, in service inspections are critical in maintaining steam generator tube integrity. In general, the eddy current testing is widely used for the inspection of steam generator tubes due tube integrity. In general, the eddy current testing is widely used for the inspection of steam generator tubes due to its high inspection speed and flaw detectability on non magnetic tubes. However, it is not easy to analyze correctly eddy current signals because they are influenced by many factors. Therefore, the performance of eddy current data analysts for steam generator tubing should be demonstrated comprehensively. In Korea, the performance of steam generator tubing analysts has been demonstrated using the Qualified Data Analyst program. This paper describes the performance demonstration program for steam generator tubing analysts and its implementation results in Korea. The pass rate of domestic analysts for this program was 71.4%

  13. LOOM-P: a finite element mesh generation program with on-line graphic display

    International Nuclear Information System (INIS)

    Ise, Takeharu; Yamazaki, Toshio.

    1977-06-01

    A description of the two-dimensional mesh generation program, LOOM-P, is given in detail. The program is developed newly to produce a mesh network for a reactor core geometry with the help of an automatic mesh generation routine built in it, under the control of the refresh-type graphic display. It is therefore similar to the edit program of the self-organizing mesh generator, QMESH-RENUM. Additional techniques are incorporated to improve the pattern of mesh elements by means of on-line conversational mode. The obtained mesh network is edited out as input data to the three-dimensional neutron diffusion theory code, FEM-BABEL. (auth.)

  14. Explosive generator development for the SHIVA program. Progress report, January 1, 1975--June 30, 1975

    International Nuclear Information System (INIS)

    Butler, R.; Duggin, B.W.

    1976-01-01

    A series of experiments performed by SLA, Division 5233, has culminated in two parallel plate explosive generator tests for the SHIVA program. The experimental generators were one-sided devices, 150 mm wide and 600 mm long with a spacing of 50 mm between the explosively driven and the stationary plates. Significant new features in these generators included (1) high point density initiation over the entire 150 mm x 600 mm surface of the driver charge with an electrically exploded copper mesh, and (2) use of a distended copper plate for the wiped surface at the load end of the generator. The distended copper plate minimized formation of a metallic jet at the interface between the driven and wiped plates. Both explosive generator tests reached current gains of about 8 and energy gains of about 4 despite early termination of generation associated with the arrival of a conductive shock front in the helium atmosphere

  15. Thermal Data Fitting with Orthogonal Functions and Combined Table Generation. The FITAB Program

    Energy Technology Data Exchange (ETDEWEB)

    Justice, Bruce H

    1969-02-01

    A FORTRAN IV program to represent experimental thermal data with orthogonal functions and to tabulate the thermodynamic functions is described. The use of a more general algorithm permits the generation of power series which can contain positive or negative powers. Further, it is possible to start generation at any power with any term-to-term increment in the exponent. This allows the use of an equation with a leading cubic term for very low temperature heat capacities. Enthalphy data can be approximated with a leading reciprocal temperature term. Appropriate coding allows analytical generation of the thermodynamic functions. The methods of combining thermal data are reviewed and discussed. The program combines any number of heat capacity and/or enthalpy segments (from formats logically selected at the time of execution) in order to generate a complete tabulation presented in rounded, directly publishable form.

  16. Motivation of parametric studies. French recommendations concerning surveillance in exploitation. Program of steam generator inspection

    International Nuclear Information System (INIS)

    Birac, C.

    1986-10-01

    The PISC/2 program deals with parametric studies; the different parameters that may have an influence on the defect detection and sizing are the following ones: effect of the defect characteristic and sitting, effect of the measuring system characteristics, and possible utilization of electro-magnetic techniques. A second part of this report concerns the French recommendations concerning surveillance while the power plant is operating. Finally the PISC 3 program is presented; it will deal with steam generator control: experimental evaluation of the performance of the tests applied to the nuclear power plant steam generator tubes [fr

  17. Computer Programs for Generation of NASTRAN and VIBRA-6 Aircraft Models.

    Science.gov (United States)

    1988-04-01

    NASTRAN as a combination of DMAP alters for Solutions 3 and 10, and a user module, MODB. The user module, MODB, performs such operations as...GENERATION _ OF NASTRAN AND VIBRA-6 AIRCRAFT MODELS Steven G. Harris Anamet Laboratories, Inc.I 3400 Investment Boulevard Haywood, CA 94545-3811 April...ACCESSION NO 62601F 8809 03 26 11 TITLE (Include Security Classification) COMPUTER PROGRAMS FOR GENERATION OF NASTRAN AND VIBRA-6 AIRCRAFT MODELS 12

  18. WIMSTAR-4: a computer program for generating WIMS library data from ENDF/B

    International Nuclear Information System (INIS)

    Wilkin, G.B.

    1981-08-01

    WIMSTAR (Version 4) is a FORTRAN-IV computer program developed to generate data files for the WIMS lattice code library from the ENDF/B data base. The program must be used in conjunction with the AMPX-II system and has been designed for implementation as a module of that system. This report describes the structure, implementation and use of the AMPX/WIMSTAR system

  19. SUBGR: A Program to Generate Subgroup Data for the Subgroup Resonance Self-Shielding Calculation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kang Seog [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-06-06

    The Subgroup Data Generation (SUBGR) program generates subgroup data, including levels and weights from the resonance self-shielded cross section table as a function of background cross section. Depending on the nuclide and the energy range, these subgroup data can be generated by (a) narrow resonance approximation, (b) pointwise flux calculations for homogeneous media; and (c) pointwise flux calculations for heterogeneous lattice cells. The latter two options are performed by the AMPX module IRFFACTOR. These subgroup data are to be used in the Consortium for Advanced Simulation of Light Water Reactors (CASL) neutronic simulator MPACT, for which the primary resonance self-shielding method is the subgroup method.

  20. Hanford Site guide for preparing and maintaining generator group pollution prevention program documentation

    International Nuclear Information System (INIS)

    Place, B.G.

    1998-01-01

    This document provides guidance to generator groups for preparing and maintaining documentation of Pollution Prevention Waste Minimization (P2/WMin) Program activities. The guidance is one of a hierarchical series that includes the Hanford Site Waste Minimization and Pollution Prevention Awareness Program Plan (DOE-RL, 1998a) and Prime contractor implementation plans describing programs required by Resource Conservation and Recovery Act of 1976 (RCRA) 3002(b) and 3005(h) (RCRA and EPA, 1994). Documentation guidance for the following five P2/WMin elements are discussed: Fiscal Year (FY) Goals; Budget and Staffing; Waste Minimization (WMin) Assessments (WMAs); Quarterly Pollution Prevention (P2) Reporting WMin Certification

  1. Restart Testing Program for piping following steam generator replacement at North Anna Unit 1

    International Nuclear Information System (INIS)

    Bain, R.A.; Bayer, R.K.

    1993-01-01

    In order to provide assurance that the effects of performing steam generator replacement (SGR) at North Anna unit 1 had no adverse impact on plant piping systems, a cold functional verification restart testing program was developed. This restart testing program was implemented in lieu of a hot functional testing program normally used during the initial startup of a nuclear plant. A review of North Anna plant-specific and generic U.S. Nuclear Regulatory Commission requirements for restart testing was performed to ensure that no mandatory hot functional testing was required. This was determined to be the case, and the development of a cold functional test program was initiated. The cold functional test had inherent advantages as compared to the hot functional testing, while still providing assurance of piping system adequacy. The advantages of the cold verification program included reducing risk to personnel from hot piping, increasing the accuracy of measurements with the improvement in work conditions, eliminating engineering activities during the heatup process, and being able to record measurements as construction work was completed allowing for rework or repair of components if required. To ensure the effectiveness of the cold verification program, a project procedure was generated to identify the personnel, equipment, and measurement requirements. An engineering calculation was issued to document the scope of the restart test program, and an additional calculation was developed to provide acceptance criteria for the critical commodity measurements

  2. Program for the development of design data: LMFBR steam generator materials

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-01-01

    Progress in fiscal year 1976 is reported for two tasks in the LMFBR steam generator materials development program. The primary objective of Task 18 is characterization of materials, mainly 2-1/4 Cr-1 Mo and austenitic stainless steels, to assure that satisfactory materials compatibility is achieved with LMFBR steam generator environments. Studies described include: the kinetics and magnitude of decarburization of 2-1/4 Cr-1 Mo in high temperature liquid sodium; decarburization effects on mechanical properties; stress corrosion susceptibility of 2-1/4 Cr-1 Mo in water/steam environments of LMFBR steam generators; and stainless steel mechanical properties within a carburizing sodium environment at high temperatures. In addition, two activities are in progress that directly support LMFBR steam generator design and fabrication. Under Subtask E, General Electric heads the working committee on steam generator materials for the Nuclear Systems Materials Handbook. Subtask F, an experimental effort, is investigating thermal degradation effects produced by particulate deposition (in sodium) on heat transfer surfaces. The Steam Generator Materials Qualification Task (Task 10-G) was initiated in support of the development of materials and processes used in Clinch River Breeder Reactor steam generators. The topics discussed are: LMFBR steam generator tubing; LMFBR steam generator tubesheet forgings (characterization of VAR/ESR melted 2-1/4 Cr-1 Mo); friction, wear and self-welding; nondestructive examination development; water chemistry studies; and transition joint development.

  3. Users manual. Pursuit program of use licenses of radioactive material or generator equipment of ionizing radiations

    International Nuclear Information System (INIS)

    Becerril M, V.M.; Villarreal, J.E.

    1992-05-01

    The objective of the program 'Databases for the pursuit of licenses of use of radioactive material', it consists on the application of a computer system carried out in dbase IV that it allows the control of the all the information related with those licenses for use, possession and storage of radioactive material or generator equipment of ionizing radiations. (Author)

  4. Data-Driven Hint Generation in Vast Solution Spaces: A Self-Improving Python Programming Tutor

    Science.gov (United States)

    Rivers, Kelly; Koedinger, Kenneth R.

    2017-01-01

    To provide personalized help to students who are working on code-writing problems, we introduce a data-driven tutoring system, ITAP (Intelligent Teaching Assistant for Programming). ITAP uses state abstraction, path construction, and state reification to automatically generate personalized hints for students, even when given states that have not…

  5. THREE-PEE SAMPLING THEORY and program 'THRP' for computer generation of selection criteria

    Science.gov (United States)

    L. R. Grosenbaugh

    1965-01-01

    Theory necessary for sampling with probability proportional to prediction ('three-pee,' or '3P,' sampling) is first developed and then exemplified by numerical comparisons of several estimators. Program 'T RP' for computer generation of appropriate 3P-sample-selection criteria is described, and convenient random integer dispensers are...

  6. Towards provably correct code generation for a hard real-time programming language

    DEFF Research Database (Denmark)

    Fränzle, Martin; Müller-Olm, Markus

    1994-01-01

    This paper sketches a hard real-time programming language featuring operators for expressing timeliness requirements in an abstract, implementation-independent way and presents parts of the design and verification of a provably correct code generator for that language. The notion of implementation...

  7. Constraint Programming Approach to the Problem of Generating Milton Babbitt's All-partition Arrays

    DEFF Research Database (Denmark)

    Tanaka, Tsubasa; Bemman, Brian; Meredith, David

    2016-01-01

    elements and corresponding to a distinct integer partition of 12. Constraint programming (CP) is a tool for solving such combinatorial and constraint satisfaction problems. In this paper, we use CP for the first time to formalize this problem in generating an all-partition array. Solving the whole...

  8. Performance Evaluation of Nose Cap to Silica Tile Joint of RLV-TD under the Simulated Flight Environment using Plasma Wind Tunnel Facility

    Science.gov (United States)

    Pillai, Aravindakshan; Krishnaraj, K.; Sreenivas, N.; Nair, Praveen

    2017-12-01

    Indian Space Research Organisation, India has successfully flight tested the reusable launch vehicle through launching of a demonstration flight known as RLV-TD HEX mission. This mission has given a platform for exposing the thermal protection system to the real hypersonic flight thermal conditions and thereby validated the design. In this vehicle, the nose cap region is thermally protected by carbon-carbon followed by silica tiles with a gap in between them for thermal expansion. The gap is filled with silica fibre. Base material on which the C-C is placed is made of molybdenum. Silica tile with strain isolation pad is bonded to aluminium structure. These interfaces with a variety of materials are characterised with different coefficients of thermal expansion joined together. In order to evaluate and qualify this joint, model tests were carried out in Plasma Wind Tunnel facility under the simultaneous simulation of heat flux and shear levels as expected in flight. The thermal and flow parameters around the model are determined and made available for the thermal analysis using in-house CFD code. Two tests were carried out. The measured temperatures at different locations were benign in both these tests and the SiC coating on C-C and the interface were also intact. These tests essentially qualified the joint interface between C-C and molybdenum bracket and C-C to silica tile interface of RLV-TD.

  9. The extinct animal show: the paleoimagery tradition and computer generated imagery in factual television programs.

    Science.gov (United States)

    Campbell, Vincent

    2009-03-01

    Extinct animals have always been popular subjects for the media, in both fiction, and factual output. In recent years, a distinctive new type of factual television program has emerged in which computer generated imagery is used extensively to bring extinct animals back to life. Such has been the commercial audience success of these programs that they have generated some public and academic debates about their relative status as science, documentary, and entertainment, as well as about their reflection of trends in factual television production, and the aesthetic tensions in the application of new media technologies. Such discussions ignore a crucial contextual feature of computer generated extinct animal programs, namely the established tradition of paleoimagery. This paper examines a selection of extinct animal shows in terms of the dominant frames of the paleoimagery genre. The paper suggests that such an examination has two consequences. First, it allows for a more context-sensitive evaluation of extinct animal programs, acknowledging rather than ignoring relevant representational traditions. Second, it allows for an appraisal and evaluation of public and critical reception of extinct animal programs above and beyond the traditional debates about tensions between science, documentary, entertainment, and public understanding.

  10. Generation Expansion Planning with Large Amounts of Wind Power via Decision-Dependent Stochastic Programming

    DEFF Research Database (Denmark)

    Zhan, Yiduo; Zheng, Qipeng; Wang, Jianhui

    2016-01-01

    Power generation expansion planning needs to deal with future uncertainties carefully, given that the invested generation assets will be in operation for a long time. Many stochastic programming models have been proposed to tackle this challenge. However, most previous works assume predetermined...... future uncertainties (i.e., fixed random outcomes with given probabilities). In several recent studies of generation assets’ planning (e.g., thermal versus renewable), new findings show that the investment decisions could affect the future uncertainties as well. To this end, this paper proposes......, the probability distribution function is determined by not only input parameters but also decision variables. To deal with the nonlinear constraints in our model, a quasi-exact solution approach is then introduced to reformulate the multistage stochastic investment model to a mixed-integer linear programming...

  11. A reliability program for emergency diesel generators at nuclear power plants: Maintenance, surveillance, and condition monitoring

    International Nuclear Information System (INIS)

    Lofgren, E.V.; Henderson, W.; Burghardt, D.; Kripps, L.; Rothleder, B.

    1988-12-01

    This report is a companion report on NUREG/CR-5078, Volume 1, ''A Reliability Program for Emergency Diesel Generators at Nuclear Power Plants: Program Structure.'' The purpose of this report is to provide technical findings and insights related to: failure evaluation, troubleshooting, maintenance, surveillance, and condition monitoring. Examples and recommendations are provided for each of these areas based on actual emergency diesel generator (EDG) operating experience and the opinions of diesel generator experts. This report expands the more general guidance provided in Volume 1. In addition, a discussion of EDG interactions with other plant systems (e.g., instrument, air, service water, dc power) is provided since experience has shown that these support systems and their operation can adversely affect EDG reliability. Portions of this report have been designed for use by onsite personnel for evaluating operational characteristics of EDGs. 5 refs., 8 figs., 7 tabs

  12. Automated Generation of Formal Models from ST Control Programs for Verification Purposes

    CERN Document Server

    Fernandez Adiego, B; Tournier, J-C; Blanco Vinuela, E; Blech, J-O; Gonzalez Suarez, V

    2014-01-01

    In large industrial control systems such as the ones installed at CERN, one of the main issues is the ability to verify the correct behaviour of the Programmable Logic Controller (PLC) programs. While manual and automated testing can achieve good results, some obvious problems remain unsolved such as the difficulty to check safety or liveness properties. This paper proposes a general methodology and a tool to verify PLC programs by automatically generating formal models for different model checkers out of ST code. The proposed methodology defines an automata-based formalism used as intermediate model (IM) to transform PLC programs written in ST language into different formal models for verification purposes. A tool based on Xtext has been implemented that automatically generates models for the NuSMV and UPPAAL model checkers and the BIP framework.

  13. DOG-II:input data generator program for DOT3.5 code

    International Nuclear Information System (INIS)

    Koizumi, Kouichi; Takatsu, Hideyuki; Seki, Yasushi; Sato, Satoshi; Hayashi, Katsumi; Handa, Hiroyuki; Yamada, Kohbun; Kamogawa, Susumu.

    1992-08-01

    Personal-computer-base input data generator program DOG-II for two dimensional discrete ordinates transport code DOT3.5 was developed. DOG-II consists of two parts, one is geometry-related routine and the other is parameter input routine. Especially DOG-II is effective for complicated geometry because geometry input generation is designed to be simple and easy. Geometry and other input data of the existing DOT3.5 input deck is easily checked and revised on the screen. Complete input deck for DOT3.5 code is obtained in card image data by this program. This report summarizes the function of the program and running instructions. (author)

  14. Experimental two-phase liquid--metal magnetohydrodynamic generator program. Annual report, August 1975--September 1976

    International Nuclear Information System (INIS)

    Petrick, M.; Fabris, G.; Pierson, E.S.; Carl, D.A.; Fischer, A.K.; Johnson, C.E.

    1977-09-01

    The revised ambient-temperature NaK-nitrogen facility is described. The maximum liquid flow rate and generator inlet pressure are 10.9 kg/s 200 gpm) and 1.48 MP/sub a/ absolute (200 psig), respectively, compared with the previous values of 6 kg/s (110 gpm) and 0.72 MPa absolute (90 psig). Satisfactory loop operation has been obtained, and new experiments with the second diverging-channel generator were completed. The principal experimental results were a higher power density for the same generator operating conditions, and an apparent tendency for the efficiency to improve more with increasing quality at higher velocities than lower velocities. An evaluation of an annular generator geometry is presented. The advantages and disadvantages of the geometry are described, the equations developed, and solutions obtained for three cases--constant velocity and no armature reactions, laminar flow with no armature reaction, and armature reaction with constant velocity. Numerical examples show that: (1) the attainable terminal voltages appear to be very low, (2) flow reversal and large viscous loss occur at or below the desired power densities, and (3) armature reaction effects are important and compensation techniques appear impractical. Thus, this annular geometry does not appear attractive for either generator or pump operation. The initial steps in the program to produce and evaluate liquid-metal foams are described. The future directions of the expermental generator program, including foams, are discussed

  15. Analysis of a comprehensive dataset of diversity generating retroelements generated by the program DiGReF

    Directory of Open Access Journals (Sweden)

    Schillinger Thomas

    2012-08-01

    Full Text Available Abstract Background Diversity Generating Retroelements (DGRs are genetic cassettes that can introduce tremendous diversity into a short, defined region of the genome. They achieve hypermutation through replacement of the variable region with a strongly mutated cDNA copy generated by the element-encoded reverse transcriptase. In contrast to “selfish” retroelements such as group II introns and retrotransposons, DGRs impart an advantage to their host by increasing its adaptive potential. DGRs were discovered in a bacteriophage, but since then additional examples have been identified in some bacterial genomes. Results Here we present the program DiGReF that allowed us to comprehensively screen available databases for DGRs. We identified 155 DGRs which are found in all major classes of bacteria, though exhibiting sporadic distribution across species. Phylogenetic analysis and sequence comparison showed that DGRs move between genomes by associating with various mobile elements such as phages, transposons and plasmids. The DGR cassettes exhibit high flexibility in the arrangement of their components and easily acquire additional paralogous target genes. Surprisingly, the genomic data alone provide new insights into the molecular mechanism of DGRs. Most notably, our data suggest that the template RNA is transcribed separately from the rest of the element. Conclusions DiGReF is a valuable tool to detect DGRs in genome data. Its output allows comprehensive analysis of various aspects of DGR biology, thus deepening our understanding of the role DGRs play in prokaryotic genome plasticity, from the global down to the molecular level.

  16. Generating and executing programs for a floating point single instruction multiple data instruction set architecture

    Science.gov (United States)

    Gschwind, Michael K

    2013-04-16

    Mechanisms for generating and executing programs for a floating point (FP) only single instruction multiple data (SIMD) instruction set architecture (ISA) are provided. A computer program product comprising a computer recordable medium having a computer readable program recorded thereon is provided. The computer readable program, when executed on a computing device, causes the computing device to receive one or more instructions and execute the one or more instructions using logic in an execution unit of the computing device. The logic implements a floating point (FP) only single instruction multiple data (SIMD) instruction set architecture (ISA), based on data stored in a vector register file of the computing device. The vector register file is configured to store both scalar and floating point values as vectors having a plurality of vector elements.

  17. Integrated scheduling of renewable generation and demand response programs in a microgrid

    International Nuclear Information System (INIS)

    Mazidi, Mohammadreza; Zakariazadeh, Alireza; Jadid, Shahram; Siano, Pierluigi

    2014-01-01

    Highlights: • Participation of all types of customers in demand response programs. • Generating scenarios by using Latin hypercube sampling (LHS). • Energy and reserve scheduling in a microgrid using stochastic optimization. - Abstract: Wind and solar energy introduced significant operational challenges in a Microgrid (MG), especially when renewable generations vary from forecasts. In this paper, forecast errors of wind speed and solar irradiance are modeled by related probability distribution functions and then, by using the Latin hypercube sampling (LHS), the plausible scenarios of renewable generation for day-head energy and reserve scheduling are generated. A two-stage stochastic objective function aiming at minimizing the expected operational cost is implemented. In the proposed method, the reserve requirement for compensating renewable forecast errors is provided by both responsive loads and distributed generation units. All types of customers such as residential, commercial and industrial ones can participate in demand response programs which are considered in either energy or reserve scheduling. In order to validate the proposed methodology, the proposed approach is finally applied to a typical MG and simulation results are carried out

  18. Generation Expansion Planning With Large Amounts of Wind Power via Decision-Dependent Stochastic Programming

    Energy Technology Data Exchange (ETDEWEB)

    Zhan, Yiduo; Zheng, Qipeng P.; Wang, Jianhui; Pinson, Pierre

    2017-07-01

    Power generation expansion planning needs to deal with future uncertainties carefully, given that the invested generation assets will be in operation for a long time. Many stochastic programming models have been proposed to tackle this challenge. However, most previous works assume predetermined future uncertainties (i.e., fixed random outcomes with given probabilities). In several recent studies of generation assets' planning (e.g., thermal versus renewable), new findings show that the investment decisions could affect the future uncertainties as well. To this end, this paper proposes a multistage decision-dependent stochastic optimization model for long-term large-scale generation expansion planning, where large amounts of wind power are involved. In the decision-dependent model, the future uncertainties are not only affecting but also affected by the current decisions. In particular, the probability distribution function is determined by not only input parameters but also decision variables. To deal with the nonlinear constraints in our model, a quasi-exact solution approach is then introduced to reformulate the multistage stochastic investment model to a mixed-integer linear programming model. The wind penetration, investment decisions, and the optimality of the decision-dependent model are evaluated in a series of multistage case studies. The results show that the proposed decision-dependent model provides effective optimization solutions for long-term generation expansion planning.

  19. Generating wood cutting patterns using mathematical programming for tactical-operative planification of sawmills

    Directory of Open Access Journals (Sweden)

    Jonnier Fabián Herrera-Medina

    2012-12-01

    Full Text Available This paper proposes a methodology for generating optimal cutting patterns in sawmills operations that minimize waste production. Firstly, a linear programming model was used to generate patterns of feasible and optimal cuts for different diameter classes. Secondly, a model which assigns efficient cutting patterns based on the supply and demand of the timber yard was employed. A total of 42 cutting patterns were assessed with a utilization level of 79 %. Levels of loss were around 25 % depending on the characteristics of the raw material.

  20. Exploratory data analysis on data generated in the DOE subsurface microbiology program

    Energy Technology Data Exchange (ETDEWEB)

    Meglen, R.R.

    1990-06-01

    The preliminary results from the innovative subsurface microbiology research program indicate that new data on the nature of the link between the geosphere and biosphere have been generated. The diversity of scientific disciplines represented in the subsurface microbiology program reflects the complexity of the system under study. The research carried out by national laboratory and university research scientists is addressing fundamental questions about the abundance of microorganisms and factors controlling microbial activity in the complex subsurface hydrologic and geochemical environment. Long-term implications of this research for mitigating contamination are clear and researchers share the broader objective of linking the basic science with applied work.

  1. Selenide isotope generator for the Galileo Mission: SIG/Galileo hermetic receptable test program final report

    Energy Technology Data Exchange (ETDEWEB)

    Roedel, S.

    1979-06-01

    The purpose of the receptacle test program was to test various types of hermetically sealed electrical receptacles and to select one model as the spaceflight hardware item for SIG/Galileo thermoelectric generators. The design goal of the program was to qualify a hermetic seal integrity of less than or equal to 1 x 10/sup -9/ std cc He/sec -atm at 400/sup 0/F (204/sup 0/C) and verify a reliability of 0.95 at a 50% confidence level for a flight mission in excess of 7 years.

  2. French Nuclear Power Generation Program: The Industrial Achievements; Le Programme Electronucleaire Francais: Realisations industrielles

    Energy Technology Data Exchange (ETDEWEB)

    Dupraz, B. [Societe Francaise d' Energie Nucleaire (SFEN), 75 - Paris (France); Lacoste, A.C. [Direction de la Surete des Installations Nucleaires (DSIN), 75 - Paris (France); Merle, P. [Bureau de Controle des Chaudieres Nucleaires (BCCN), 75 - Paris (France); Scherrer, J. [Commission Centrale des Appareils a Pression (CCAP), 75 - Paris (France); Stricker, L. [Electricite de France (EDF), 75 - Paris (France). Div. Production Nucleaire; Joint-Lambert, V. [FRAMATOME, 92 - Paris-La-Defense (France); Montalembert, A. de [Cogema, 78 - Velizy-Villacoublay (France); Flament, T.A.; Hubert, X. [Numatec Hanford Corporation (NHC), Richland-Washington (United States); Zaccai, H. [SGN Reseau Eurisys, 78 - Saint Quentin (France); Ouzounian, G. [Agence Nationale pour la Gestion des Dechets Nucleaires (ANDRA), 92 - Chatenay-Malabry (France); Voin, R. [Groupe Intersyndical de l' Industrie Nucleaire (GIIN), 75 - Paris (France)

    1999-09-01

    The 're-opening' issue (no 4) of RGN is devoted, each year, to the situation of the French nuclear power generation program under several aspects (achievements, operation, safety, maintenance, fuel cycle, waste management, etc.). This issue is very similar, but more particularly dedicated to the industrial aspects of the program. Thus, in parallel with scientific and technical topics, the issue deals with several subjects (nuclear competitiveness, plutonium management, cleanup of nuclear sites, etc.) from the economic and industrial standpoint, and with the situation of medium- and small-size French nuclear companies. (author)

  3. Steam generator tube integrity program: Annual report, August 1995--September 1996. Volume 2

    International Nuclear Information System (INIS)

    Diercks, D.R.; Bakhtiari, S.; Kasza, K.E.; Kupperman, D.S.; Majumdar, S.; Park, J.Y.; Shack, W.J.

    1998-02-01

    This report summarizes work performed by Argonne National Laboratory on the Steam Generator Tube Integrity Program from the inception of the program in August 1995 through September 1996. The program is divided into five tasks: (1) assessment of inspection reliability, (2) research on ISI (inservice-inspection) technology, (3) research on degradation modes and integrity, (4) tube removals from steam generators, and (5) program management. Under Task 1, progress is reported on the preparation of facilities and evaluation of nondestructive evaluation techniques for inspecting a mock-up steam generator for round-robin testing, the development of better ways to correlate failure pressure and leak rate with eddy current (EC) signals, the inspection of sleeved tubes, workshop and training activities, and the evaluation of emerging NDE technology. Results are reported in Task 2 on closed-form solutions and finite-element electromagnetic modeling of EC probe responses for various probe designs and flaw characteristics. In Task 3, facilities are being designed and built for the production of cracked tubes under aggressive and near-prototypical conditions and for the testing of flawed and unflawed tubes under normal operating, accident, and severe-accident conditions. Crack behavior and stability are also being modeled to provide guidance for test facility design, develop an improved understanding of the expected rupture behavior of tubes with circumferential cracks, and predict the behavior of flawed and unflawed tubes under severe accident conditions. Task 4 is concerned with the acquisition of tubes and tube sections from retired steam generators for use in the other research tasks. Progress on the acquisition of tubes from the Salem and McGuire 1 nuclear plants is reported

  4. Spur gears: Optimal geometry, methods for generation and Tooth Contact Analysis (TCA) program

    Science.gov (United States)

    Litvin, Faydor L.; Zhang, Jiao

    1988-01-01

    The contents of this report include the following: (1) development of optimal geometry for crowned spur gears; (2) methods for their generation; and (3) tooth contact analysis (TCA) computer programs for the analysis of meshing and bearing contact on the crowned spur gears. The method developed for synthesis is used for the determination of the optimal geometry for crowned pinion surface and is directed to reduce the sensitivity of the gears to misalignment, localize the bearing contact, and guarantee the favorable shape and low level of the transmission errors. A new method for the generation of the crowned pinion surface has been proposed. This method is based on application of the tool with a surface of revolution that slightly deviates from a regular cone surface. The tool can be used as a grinding wheel or as a shaver. The crowned pinion surface can also be generated by a generating plane whose motion is provided by an automatic grinding machine controlled by a computer. The TCA program simulates the meshing and bearing contact of the misaligned gears. The transmission errors are also determined.

  5. Description of a program for steam generators; Descripcion de un programa de generadores de vapor

    Energy Technology Data Exchange (ETDEWEB)

    Campana, F. J.

    2014-10-01

    Steam Generators (SGs) are a key component of PWR nuclear power plants, maintaining their structural integrity throughout their life time is necessary to allow for long term operation (LTD) of PWR plants. NEI 97-06 provides the fundamental elements to be included in a SG Program. In addiction it describes performance criteria that SG tubes have to meet in order to provide reasonable assurance that the tubes are still able to maintain specific safety function. Hence, it is mandatory for plants with SGs to have defined a SG program consistent with NEI 97-06 and contains the elements which are described by it. This Program must contain some elements such as, Degradation Assessment, inspection and Integrity Assessment, among other. (Author)

  6. CDFTBL: A statistical program for generating cumulative distribution functions from data

    International Nuclear Information System (INIS)

    Eslinger, P.W.

    1991-06-01

    This document describes the theory underlying the CDFTBL code and gives details for using the code. The CDFTBL code provides an automated tool for generating a statistical cumulative distribution function that describes a set of field data. The cumulative distribution function is written in the form of a table of probabilities, which can be used in a Monte Carlo computer code. A a specific application, CDFTBL can be used to analyze field data collected for parameters required by the PORMC computer code. Section 2.0 discusses the mathematical basis of the code. Section 3.0 discusses the code structure. Section 4.0 describes the free-format input command language, while Section 5.0 describes in detail the commands to run the program. Section 6.0 provides example program runs, and Section 7.0 provides references. The Appendix provides a program source listing. 11 refs., 2 figs., 19 tabs

  7. Hanford Site Guide for Preparing and Maintaining Generator Group Pollution Prevention Program Documentation

    Energy Technology Data Exchange (ETDEWEB)

    PLACE, B.G.

    2000-11-01

    This document provides guidance to generator groups for preparing and maintaining documentation of Pollution Prevention/Waste Minimization (P2/WMin) Program activities. The guidance is one of a hierarchical series that includes the Hanford Site Waste Minimization and Pollution Prevention Awareness Program Plan (DOE-RL, 2000) and Prime Contractor implementation plans describing programs required by Resource Conservation and Recovery Act of 1976 (RCRA) 3002(b) and 3005(h) (RCRA and EPA, 1994) and Department of Energy Acquisition Regulations (DEAR) (48 CFR 970.5204-2 and 48 CFR 970.5204-78). Documentation guidance for the following five P2/WMin elements is discussed: Fiscal Year (FY) Goals; Budget and Staffing; Pollution Prevention (P2) Reporting; WMin Certification; and Waste Minimization (WMin) Assessments (WMAs).

  8. Computer software program for monitoring the availability of systems and components of electric power generating systems

    International Nuclear Information System (INIS)

    Petersen, T.A.; Hilsmeier, T.A.; Kapinus, D.M.

    1994-01-01

    As availabilities of electric power generating stations systems and components become more and more important from a financial, personnel safety, and regulatory requirements standpoint, it is evident that a comprehensive, yet simple and user-friendly program for system and component tracking and monitoring is needed to assist in effectively managing the large volume of systems and components with their large numbers of associated maintenance/availability records. A user-friendly computer software program for system and component availability monitoring has been developed that calculates, displays and monitors selected component and system availabilities. This is a Windows trademark based (Graphical User Interface) program that utilizes a system flow diagram for the data input screen which also provides a visual representation of availability values and limits for the individual components and associated systems. This program can be customized to the user's plant-specific system and component selections and configurations. As will be discussed herein, this software program is well suited for availability monitoring and ultimately providing valuable information for improving plant performance and reducing operating costs

  9. Updated Generation IV Reactors Integrated Materials Technology Program Plan, Revision 2

    Energy Technology Data Exchange (ETDEWEB)

    Corwin, William R [ORNL; Burchell, Timothy D [ORNL; Halsey, William [Lawrence Livermore National Laboratory (LLNL); Hayner, George [Idaho National Laboratory (INL); Katoh, Yutai [ORNL; Klett, James William [ORNL; McGreevy, Timothy E [ORNL; Nanstad, Randy K [ORNL; Ren, Weiju [ORNL; Snead, Lance Lewis [ORNL; Stoller, Roger E [ORNL; Wilson, Dane F [ORNL

    2005-12-01

    The Department of Energy's (DOE's) Generation IV Nuclear Energy Systems Program will address the research and development (R&D) necessary to support next-generation nuclear energy systems. Such R&D will be guided by the technology roadmap developed for the Generation IV International Forum (GIF) over two years with the participation of over 100 experts from the GIF countries. The roadmap evaluated over 100 future systems proposed by researchers around the world. The scope of the R&D described in the roadmap covers the six most promising Generation IV systems. The effort ended in December 2002 with the issue of the final Generation IV Technology Roadmap [1.1]. The six most promising systems identified for next generation nuclear energy are described within the roadmap. Two employ a thermal neutron spectrum with coolants and temperatures that enable hydrogen or electricity production with high efficiency (the Supercritical Water Reactor - SCWR and the Very High Temperature Reactor - VHTR). Three employ a fast neutron spectrum to enable more effective management of actinides through recycling of most components in the discharged fuel (the Gas-cooled Fast Reactor - GFR, the Lead-cooled Fast Reactor - LFR, and the Sodium-cooled Fast Reactor - SFR). The Molten Salt Reactor (MSR) employs a circulating liquid fuel mixture that offers considerable flexibility for recycling actinides, and may provide an alternative to accelerator-driven systems. A few major technologies have been recognized by DOE as necessary to enable the deployment of the next generation of advanced nuclear reactors, including the development and qualification of the structural materials needed to ensure their safe and reliable operation. Accordingly, DOE has identified materials as one of the focus areas for Gen IV technology development.

  10. SIS: a program to generate draft genome sequence scaffolds for prokaryotes.

    Science.gov (United States)

    Dias, Zanoni; Dias, Ulisses; Setubal, João C

    2012-05-14

    Decreasing costs of DNA sequencing have made prokaryotic draft genome sequences increasingly common. A contig scaffold is an ordering of contigs in the correct orientation. A scaffold can help genome comparisons and guide gap closure efforts. One popular technique for obtaining contig scaffolds is to map contigs onto a reference genome. However, rearrangements that may exist between the query and reference genomes may result in incorrect scaffolds, if these rearrangements are not taken into account. Large-scale inversions are common rearrangement events in prokaryotic genomes. Even in draft genomes it is possible to detect the presence of inversions given sufficient sequencing coverage and a sufficiently close reference genome. We present a linear-time algorithm that can generate a set of contig scaffolds for a draft genome sequence represented in contigs given a reference genome. The algorithm is aimed at prokaryotic genomes and relies on the presence of matching sequence patterns between the query and reference genomes that can be interpreted as the result of large-scale inversions; we call these patterns inversion signatures. Our algorithm is capable of correctly generating a scaffold if at least one member of every inversion signature pair is present in contigs and no inversion signatures have been overwritten in evolution. The algorithm is also capable of generating scaffolds in the presence of any kind of inversion, even though in this general case there is no guarantee that all scaffolds in the scaffold set will be correct. We compare the performance of sis, the program that implements the algorithm, to seven other scaffold-generating programs. The results of our tests show that sis has overall better performance. sis is a new easy-to-use tool to generate contig scaffolds, available both as stand-alone and as a web server. The good performance of sis in our tests adds evidence that large-scale inversions are widespread in prokaryotic genomes.

  11. SIS: a program to generate draft genome sequence scaffolds for prokaryotes

    Directory of Open Access Journals (Sweden)

    Dias Zanoni

    2012-05-01

    Full Text Available Abstract Background Decreasing costs of DNA sequencing have made prokaryotic draft genome sequences increasingly common. A contig scaffold is an ordering of contigs in the correct orientation. A scaffold can help genome comparisons and guide gap closure efforts. One popular technique for obtaining contig scaffolds is to map contigs onto a reference genome. However, rearrangements that may exist between the query and reference genomes may result in incorrect scaffolds, if these rearrangements are not taken into account. Large-scale inversions are common rearrangement events in prokaryotic genomes. Even in draft genomes it is possible to detect the presence of inversions given sufficient sequencing coverage and a sufficiently close reference genome. Results We present a linear-time algorithm that can generate a set of contig scaffolds for a draft genome sequence represented in contigs given a reference genome. The algorithm is aimed at prokaryotic genomes and relies on the presence of matching sequence patterns between the query and reference genomes that can be interpreted as the result of large-scale inversions; we call these patterns inversion signatures. Our algorithm is capable of correctly generating a scaffold if at least one member of every inversion signature pair is present in contigs and no inversion signatures have been overwritten in evolution. The algorithm is also capable of generating scaffolds in the presence of any kind of inversion, even though in this general case there is no guarantee that all scaffolds in the scaffold set will be correct. We compare the performance of sis, the program that implements the algorithm, to seven other scaffold-generating programs. The results of our tests show that sis has overall better performance. Conclusions sis is a new easy-to-use tool to generate contig scaffolds, available both as stand-alone and as a web server. The good performance of sis in our tests adds evidence that large

  12. Prenatal caffeine ingestion induces transgenerational neuroendocrine metabolic programming alteration in second generation rats

    International Nuclear Information System (INIS)

    Luo, Hanwen; Deng, Zixin; Liu, Lian; Shen, Lang; Kou, Hao; He, Zheng; Ping, Jie; Xu, Dan; Ma, Lu; Chen, Liaobin; Wang, Hui

    2014-01-01

    Our previous studies have demonstrated that prenatal caffeine ingestion induces an increased susceptibility to metabolic syndrome with alterations of glucose and lipid metabolic phenotypes in adult first generation (F1) of intrauterine growth retardation (IUGR) rats, and the underlying mechanism is originated from a hypothalamic–pituitary–adrenal (HPA) axis-associated neuroendocrine metabolic programming alteration in utero. This study aims to investigate the transgenerational effects of this programming alteration in adult second generation (F2). Pregnant Wistar rats were administered with caffeine (120 mg/kg·d) from gestational day 11 until delivery. Four groups in F2 were set according to the cross-mating between control and caffeine-induced IUGR rats. F2 were subjected to a fortnight ice water swimming stimulus on postnatal month 4, and blood samples were collected before and after stress. Results showed that the majority of the activities of HPA axis and phenotypes of glucose and lipid metabolism were altered in F2. Particularly, comparing with the control group, caffeine groups had an enhanced corticosterone levels after chronic stress. Compared with before stress, the serum glucose levels were increased in some groups whereas the triglyceride levels were decreased. Furthermore, total cholesterol gain rates were enhanced but the high-density lipoprotein-cholesterol gain rates were decreased in most caffeine groups after stress. These transgenerational effects were characterized partially with gender and parental differences. Taken together, these results indicate that the reproductive and developmental toxicities and the neuroendocrine metabolic programming mechanism by prenatal caffeine ingestion have transgenerational effects in rats, which may help to explain the susceptibility to metabolic syndrome and associated diseases in F2. - Highlights: • Caffeine-induced neuroendocrine metabolic programming of HPA has hereditary effect. • Caffeine

  13. Prenatal caffeine ingestion induces transgenerational neuroendocrine metabolic programming alteration in second generation rats

    Energy Technology Data Exchange (ETDEWEB)

    Luo, Hanwen [Department of Pharmacology, Basic Medical School of Wuhan University, Wuhan 430071 (China); Department of Orthopedic Surgery, Zhongnan Hospital of Wuhan University, Wuhan 430071 (China); Deng, Zixin; Liu, Lian; Shen, Lang; Kou, Hao; He, Zheng [Department of Pharmacology, Basic Medical School of Wuhan University, Wuhan 430071 (China); Ping, Jie; Xu, Dan [Department of Pharmacology, Basic Medical School of Wuhan University, Wuhan 430071 (China); Research Center of Food and Drug Evaluation, Wuhan University, Wuhan 430071 (China); Ma, Lu [Department of Epidemiology and Health Statistics, Public Health School of Wuhan University, Wuhan 430071 (China); Chen, Liaobin, E-mail: lbchen@whu.edu.cn [Department of Orthopedic Surgery, Zhongnan Hospital of Wuhan University, Wuhan 430071 (China); Wang, Hui, E-mail: wanghui19@whu.edu.cn [Department of Pharmacology, Basic Medical School of Wuhan University, Wuhan 430071 (China); Research Center of Food and Drug Evaluation, Wuhan University, Wuhan 430071 (China)

    2014-02-01

    Our previous studies have demonstrated that prenatal caffeine ingestion induces an increased susceptibility to metabolic syndrome with alterations of glucose and lipid metabolic phenotypes in adult first generation (F1) of intrauterine growth retardation (IUGR) rats, and the underlying mechanism is originated from a hypothalamic–pituitary–adrenal (HPA) axis-associated neuroendocrine metabolic programming alteration in utero. This study aims to investigate the transgenerational effects of this programming alteration in adult second generation (F2). Pregnant Wistar rats were administered with caffeine (120 mg/kg·d) from gestational day 11 until delivery. Four groups in F2 were set according to the cross-mating between control and caffeine-induced IUGR rats. F2 were subjected to a fortnight ice water swimming stimulus on postnatal month 4, and blood samples were collected before and after stress. Results showed that the majority of the activities of HPA axis and phenotypes of glucose and lipid metabolism were altered in F2. Particularly, comparing with the control group, caffeine groups had an enhanced corticosterone levels after chronic stress. Compared with before stress, the serum glucose levels were increased in some groups whereas the triglyceride levels were decreased. Furthermore, total cholesterol gain rates were enhanced but the high-density lipoprotein-cholesterol gain rates were decreased in most caffeine groups after stress. These transgenerational effects were characterized partially with gender and parental differences. Taken together, these results indicate that the reproductive and developmental toxicities and the neuroendocrine metabolic programming mechanism by prenatal caffeine ingestion have transgenerational effects in rats, which may help to explain the susceptibility to metabolic syndrome and associated diseases in F2. - Highlights: • Caffeine-induced neuroendocrine metabolic programming of HPA has hereditary effect. • Caffeine

  14. Selenide isotope generator for the Galileo mission. Quality assurance program plan

    Energy Technology Data Exchange (ETDEWEB)

    1978-08-01

    This Quality Program Plan has been prepared to describe the quality activities associated with the development, production, test and delivery of hardware for the Selenide Isotope Generator Program. The objective of the Quality Program Plan is to establish and maintain an effective and economical quality assurance system to assure that end items are in accordance with contractural specifications. Section I.9 of Appendix A (Statement of Work) states: The Contractor shall prepare, implement and maintain a Quality Assurance program in accordance with a DOE approved Quality Assurance Program Plan which, for purposes of this contract, the parties agree represent a modified compliance with the latest requirements of the latest NRA-1 in effect at the time of the contract issuance. NRA-1 sets forth general requirements for quality assurance programs covering a wide variety of nuclear systems and is sufficiently expansive in scope to outline the quality activities of a broad range of contractural efforts. This Quality Assurance Program Plan, including the individual Quality Directives (Quality Procedures referenced in various Quality Directives provide only historical foundations of Quality Policy and as such are not relevant to the specifics of this plan.) attached in Appendix I, defines the quality activities that are to be accomplished under the current contractural work effort. The extent to which this Plan provides activity to accomplish the major intent of each section of NRA-1 is summarized in Table 1. NRA-1 however, provides only the skeletal foundation for the plan and it should not be construed that sections or portions not explicitly quoted are implied. The Plan will function as an independent and self-supportative document.

  15. Maternal obesity heritably perturbs offspring metabolism for three generations without serial programming.

    Science.gov (United States)

    Eaton, S A; Aiken, A J; Young, P E; Ho, J W K; Cropley, J E; Suter, C M

    2017-10-06

    Maternal obesity can program offspring metabolism across multiple generations. It is not known whether multigenerational effects reflect true inheritance of the induced phenotype, or are due to serial propagation of the phenotype through repeated exposure to a compromised gestational milieu. Here we sought to distinguish these possibilities, using the A vy mouse model of maternal obesity. In this model, F1 sons of obese dams display a predisposition to hepatic insulin resistance, which remains latent unless the offspring are challenged with a Western diet. We find that F2 grandsons and F3 great grandsons of obese dams also carry the latent predisposition to metabolic dysfunction, but remain metabolically normal on a healthy diet. Given that the breeding animals giving rise to F2 and F3 were maintained on a healthy diet, the latency of the phenotype permits exclusion of serial programming; we also confirmed that F1 females remained metabolically healthy during pregnancy. Molecular analyses of male descendants identified upregulation of hepatic Apoa4 as a consistent signature of the latent phenotype across all generations. Our results exclude serial programming as a factor in transmission of the metabolic phenotype induced by ancestral maternal obesity, and indicate inheritance through the germline, probably via some form of epigenetic inheritance.International Journal of Obesity advance online publication, 31 October 2017; doi:10.1038/ijo.2017.247.

  16. DOG -II input generator program for DOT3.5 code

    International Nuclear Information System (INIS)

    Hayashi, Katsumi; Handa, Hiroyuki; Yamada, Koubun; Kamogawa, Susumu; Takatsu, Hideyuki; Koizumi, Kouichi; Seki, Yasushi

    1992-01-01

    DOT3.5 is widely used for radiation transport analysis of fission reactors, fusion experimental facilities and particle accelerators. We developed the input generator program for DOT3.5 code in aim to prepare input data effectively. Formar program DOG was developed and used internally in Hitachi Engineering Company. In this new version DOG-II, limitation for R-Θ geometry was removed. All the input data is created by interactive method in front of color display without using DOT3.5 manual. Also the geometry related input are easily created without calculation of precise curved mesh point. By using DOG-II, reliable input data for DOT3.5 code is obtained easily and quickly

  17. The DOE/NREL Next Generation Natural Gas Vehicle Program - An Overview

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Walkowicz; Denny Stephens; Kevin Stork

    2001-05-14

    This paper summarizes the Next Generation Natural Gas Vehicle (NG-NGV) Program that is led by the U.S. Department Of Energy's (DOE's) Office of Heavy Vehicle Technologies (OHVT) through the National Renewable Energy Laboratory (NREL). The goal of this program is to develop and implement one Class 3-6 compressed natural gas (CNG) prototype vehicle and one Class 7-8 liquefied natural gas (LNG) prototype vehicle in the 2004 to 2007 timeframe. OHVT intends for these vehicles to have 0.5 g/bhp-hr or lower emissions of oxides of nitrogen (NOx) by 2004 and 0.2 g/bhp-hr or lower NOx by 2007. These vehicles will also have particulate matter (PM) emissions of 0.01 g/bhp-hr or lower by 2004. In addition to ambitious emissions goals, these vehicles will target life-cycle economics that are compatible with their conventionally fueled counterparts.

  18. Generation and transcriptional programming of intestinal dendritic cells: essential role of retinoic acid

    DEFF Research Database (Denmark)

    Zeng, R.; Bscheider, M; Lahl, Katharina

    2016-01-01

    reversed by reintroducing vitamin A. In cultures of pre-μDC with Flt3L and granulocyte-macrophage colony-stimulating factor (GM-CSF), RA induced cDC with characteristic phenotypes of intestinal cDC1 and cDC2 by controlling subset-defining cell surface receptors, regulating subset-specific transcriptional...... programs, and suppressing proinflammatory nuclear factor-κB-dependent gene expression. Thus, RA is required for transcriptional programming and maturation of intestinal cDC, and with GM-CSF and Flt3L provides a minimal environment for in vitro generation of intestinal cDC1- and cDC2-like cDC from...

  19. Generation IV Nuclear Energy Systems Ten-Year Program Plan Fiscal Year 2005, Volume 1

    International Nuclear Information System (INIS)

    None

    2005-01-01

    As reflected in the U.S. ''National Energy Policy'', nuclear energy has a strong role to play in satisfying our nation's future energy security and environmental quality needs. The desirable environmental, economic, and sustainability attributes of nuclear energy give it a cornerstone position, not only in the U.S. energy portfolio, but also in the world's future energy portfolio. Accordingly, on September 20, 2002, U.S. Energy Secretary Spencer Abraham announced that, ''The United States and nine other countries have agreed to develop six Generation IV nuclear energy concepts''. The Secretary also noted that the systems are expected to ''represent significant advances in economics, safety, reliability, proliferation resistance, and waste minimization''. The six systems and their broad, worldwide research and development (R and D) needs are described in ''A Technology Roadmap for Generation IV Nuclear Energy Systems'' (hereafter referred to as the Generation IV Roadmap). The first 10 years of required U.S. R and D contributions to achieve the goals described in the Generation IV Roadmap are outlined in this Program Plan

  20. Generation IV Nuclear Energy Systems Ten-Year Program Plan Fiscal Year 2005, Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    None

    2005-03-01

    As reflected in the U.S. ''National Energy Policy'', nuclear energy has a strong role to play in satisfying our nation's future energy security and environmental quality needs. The desirable environmental, economic, and sustainability attributes of nuclear energy give it a cornerstone position, not only in the U.S. energy portfolio, but also in the world's future energy portfolio. Accordingly, on September 20, 2002, U.S. Energy Secretary Spencer Abraham announced that, ''The United States and nine other countries have agreed to develop six Generation IV nuclear energy concepts''. The Secretary also noted that the systems are expected to ''represent significant advances in economics, safety, reliability, proliferation resistance, and waste minimization''. The six systems and their broad, worldwide research and development (R&D) needs are described in ''A Technology Roadmap for Generation IV Nuclear Energy Systems'' (hereafter referred to as the Generation IV Roadmap). The first 10 years of required U.S. R&D contributions to achieve the goals described in the Generation IV Roadmap are outlined in this Program Plan.

  1. RandSpg: An open-source program for generating atomistic crystal structures with specific spacegroups

    Science.gov (United States)

    Avery, Patrick; Zurek, Eva

    2017-04-01

    A new algorithm, RANDSPG, that can be used to generate trial crystal structures with specific space groups and compositions is described. The program has been designed for systems where the atoms are independent of one another, and it is therefore primarily suited towards inorganic systems. The structures that are generated adhere to user-defined constraints such as: the lattice shape and size, stoichiometry, set of space groups to be generated, and factors that influence the minimum interatomic separations. In addition, the user can optionally specify if the most general Wyckoff position is to be occupied or constrain select atoms to specific Wyckoff positions. Extensive testing indicates that the algorithm is efficient and reliable. The library is lightweight, portable, dependency-free and is published under a license recognized by the Open Source Initiative. A web interface for the algorithm is publicly accessible at http://xtalopt.openmolecules.net/randSpg/randSpg.html. RANDSPG has also been interfaced with the XTALOPT evolutionary algorithm for crystal structure prediction, and it is illustrated that the use of symmetric lattices in the first generation of randomly created individuals decreases the number of structures that need to be optimized to find the global energy minimum.

  2. U.S. FUEL CYCLE TECHNOLOGIES R&D PROGRAM FOR NEXT GENERATION NUCLEAR MATERIALS MANAGEMENT

    Directory of Open Access Journals (Sweden)

    M.C. MILLER

    2013-11-01

    Full Text Available The U.S. Department of Energy's Fuel Cycle Technologies R&D program under the Office of Nuclear Energy is working to advance technologies to enhance both the existing and future fuel cycles. One thrust area is in developing enabling technologies for next generation nuclear materials management under the Materials Protection, Accounting and Control Technologies (MPACT Campaign where advanced instrumentation, analysis and assessment methods, and security approaches are being developed under a framework of Safeguards and Security by Design. An overview of the MPACT campaign's activities and recent accomplishments is presented along with future plans.

  3. Programs of monitoring of the steam generators of EdF nuclear power plants

    International Nuclear Information System (INIS)

    2001-01-01

    This decision from the French authority of nuclear safety (ASN) modifies the decision DSIN/GRE-BCCN no 000632 from October 31, 2000 concerning the preventive maintenance programs of the steam generators of Electricite de France (EdF) reactors. The main themes of the previous decision are not changed, i.e. the improvement of circumferential crack detection means, the reinforcement of the external skin control of tubes and the correction of vibrational instabilities for a given family of tubes. The modification concerns only the paragraph 2.b relative to the internal crack control of the 600 MA alloy tubes in the rolling transition zone. This paragraph is abrogated. (J.S.)

  4. Environmental Restoration Program pollution prevention performance measures for FY 1993 and 1994 remedial investigations: Generator training manual

    Energy Technology Data Exchange (ETDEWEB)

    1993-03-01

    This computer-based program is designed to help waste generators in the Environmental Restoration (ER) Program prevent pollution at the DOE Oak Ridge Field Office (DOE-OR) facilities in Oak Ridge, Paducah, and Portsmouth. The Numerical Scoring System (NSS) is an interactive system designed to maintain data on ER Program pollution prevention efforts and to measure the success of these efforts through the ER Program life cycle.

  5. Environmental Restoration Program pollution prevention performance measures for FY 1993 and 1994 remedial investigations: Generator training manual

    International Nuclear Information System (INIS)

    1993-03-01

    This computer-based program is designed to help waste generators in the Environmental Restoration (ER) Program prevent pollution at the DOE Oak Ridge Field Office (DOE-OR) facilities in Oak Ridge, Paducah, and Portsmouth. The Numerical Scoring System (NSS) is an interactive system designed to maintain data on ER Program pollution prevention efforts and to measure the success of these efforts through the ER Program life cycle

  6. Status of the Monticello nuclear generating plant lead plant license renewal program

    International Nuclear Information System (INIS)

    Pickens, T.A.

    1992-01-01

    In 1988, the Monticello nuclear generating plant was chosen by the US Department of Energy through Sandia National Laboratories and the Electric Power Research Institute to serve as the lead boiling water reactor in the lead plant license renewal program. The purpose of the lead plant license renewal program is to provide insights during the development of and to demonstrate the license renewal regulatory process with the US Nuclear Regulatory Commission (NRC). The work being performed in three phases: (1) preparation of the technical basis for license renewal; (2) development of the technical basis into a formal license renewal application; and (3) review of the application by the NRC. This paper discusses the systems and structures identified as important to license renewal in accordance with 10CFR54 as well as the plant documents and programs that were used in going through the identification process. The systems and structures important to license renewal will then provide insights into how structures and components were identified that are required to be evaluated for aging, the elements of the aging evaluations, and the effective programs used to manage potentially significant aging

  7. Steam generator tube integrity program. Semiannual report, August 1995--March 1996

    International Nuclear Information System (INIS)

    Diercks, D.R.; Bakhtiari, S.; Chopra, O.K.

    1997-04-01

    This report summarizes work performed by Argonne National Laboratory on the Steam Generator Tube Integrity Program from the inception of that program in August 1995 through March 1996. The program is divided into five tasks, namely (1) Assessment of Inspection Reliability, (2) Research on ISI (in-service-inspection) Technology, (3) Research on Degradation Modes and Integrity, (4) Development of Methodology and Technical Requirements for Current and Emerging Regulatory Issues, and (5) Program Management. Under Task 1, progress is reported on the preparation of and evaluation of nondestructive evaluation (NDE) techniques for inspecting a mock-up steam generator for round-robin testing, the development of better ways to correlate burst pressure and leak rate with eddy current (EC) signals, the inspection of sleeved tubes, workshop and training activities, and the evaluation of emerging NDE technology. Under Task 2, results are reported on closed-form solutions and finite element electromagnetic modeling of EC probe response for various probe designs and flaw characteristics. Under Task 3, facilities are being designed and built for the production of cracked tubes under aggressive and near-prototypical conditions and for the testing of flawed and unflawed tubes under normal operating, accident, and severe accident conditions. In addition, crack behavior and stability are being modeled to provide guidance on test facility design, to develop an improved understanding of the expected rupture behavior of tubes with circumferential cracks, and to predict the behavior of flawed and unflawed tubes under severe accident conditions. Task 4 is concerned with the cracking and failure of tubes that have been repaired by sleeving, and with a review of literature on this subject

  8. Next Generation Nuclear Plant Methods Research and Development Technical Program Plan -- PLN-2498

    Energy Technology Data Exchange (ETDEWEB)

    Richard R. Schultz; Abderrafi M. Ougouag; David W. Nigg; Hans D. Gougar; Richard W. Johnson; William K. Terry; Chang H. Oh; Donald W. McEligot; Gary W. Johnsen; Glenn E. McCreery; Woo Y. Yoon; James W. Sterbentz; J. Steve Herring; Temitope A. Taiwo; Thomas Y. C. Wei; William D. Pointer; Won S. Yang; Michael T. Farmer; Hussein S. Khalil; Madeline A. Feltus

    2008-09-01

    One of the great challenges of designing and licensing the Very High Temperature Reactor (VHTR) is to confirm that the intended VHTR analysis tools can be used confidently to make decisions and to assure all that the reactor systems are safe and meet the performance objectives of the Generation IV Program. The research and development (R&D) projects defined in the Next Generation Nuclear Plant (NGNP) Design Methods Development and Validation Program will ensure that the tools used to perform the required calculations and analyses can be trusted. The Methods R&D tasks are designed to ensure that the calculational envelope of the tools used to analyze the VHTR reactor systems encompasses, or is larger than, the operational and transient envelope of the VHTR itself. The Methods R&D focuses on the development of tools to assess the neutronic and thermal fluid behavior of the plant. The fuel behavior and fission product transport models are discussed in the Advanced Gas Reactor (AGR) program plan. Various stress analysis and mechanical design tools will also need to be developed and validated and will ultimately also be included in the Methods R&D Program Plan. The calculational envelope of the neutronics and thermal-fluids software tools intended to be used on the NGNP is defined by the scenarios and phenomena that these tools can calculate with confidence. The software tools can only be used confidently when the results they produce have been shown to be in reasonable agreement with first-principle results, thought-problems, and data that describe the “highly ranked” phenomena inherent in all operational conditions and important accident scenarios for the VHTR.

  9. An Efficacious Multi-Objective Fuzzy Linear Programming Approach for Optimal Power Flow Considering Distributed Generation.

    Science.gov (United States)

    Warid, Warid; Hizam, Hashim; Mariun, Norman; Abdul-Wahab, Noor Izzri

    2016-01-01

    This paper proposes a new formulation for the multi-objective optimal power flow (MOOPF) problem for meshed power networks considering distributed generation. An efficacious multi-objective fuzzy linear programming optimization (MFLP) algorithm is proposed to solve the aforementioned problem with and without considering the distributed generation (DG) effect. A variant combination of objectives is considered for simultaneous optimization, including power loss, voltage stability, and shunt capacitors MVAR reserve. Fuzzy membership functions for these objectives are designed with extreme targets, whereas the inequality constraints are treated as hard constraints. The multi-objective fuzzy optimal power flow (OPF) formulation was converted into a crisp OPF in a successive linear programming (SLP) framework and solved using an efficient interior point method (IPM). To test the efficacy of the proposed approach, simulations are performed on the IEEE 30-busand IEEE 118-bus test systems. The MFLP optimization is solved for several optimization cases. The obtained results are compared with those presented in the literature. A unique solution with a high satisfaction for the assigned targets is gained. Results demonstrate the effectiveness of the proposed MFLP technique in terms of solution optimality and rapid convergence. Moreover, the results indicate that using the optimal DG location with the MFLP algorithm provides the solution with the highest quality.

  10. An Efficacious Multi-Objective Fuzzy Linear Programming Approach for Optimal Power Flow Considering Distributed Generation.

    Directory of Open Access Journals (Sweden)

    Warid Warid

    Full Text Available This paper proposes a new formulation for the multi-objective optimal power flow (MOOPF problem for meshed power networks considering distributed generation. An efficacious multi-objective fuzzy linear programming optimization (MFLP algorithm is proposed to solve the aforementioned problem with and without considering the distributed generation (DG effect. A variant combination of objectives is considered for simultaneous optimization, including power loss, voltage stability, and shunt capacitors MVAR reserve. Fuzzy membership functions for these objectives are designed with extreme targets, whereas the inequality constraints are treated as hard constraints. The multi-objective fuzzy optimal power flow (OPF formulation was converted into a crisp OPF in a successive linear programming (SLP framework and solved using an efficient interior point method (IPM. To test the efficacy of the proposed approach, simulations are performed on the IEEE 30-busand IEEE 118-bus test systems. The MFLP optimization is solved for several optimization cases. The obtained results are compared with those presented in the literature. A unique solution with a high satisfaction for the assigned targets is gained. Results demonstrate the effectiveness of the proposed MFLP technique in terms of solution optimality and rapid convergence. Moreover, the results indicate that using the optimal DG location with the MFLP algorithm provides the solution with the highest quality.

  11. Alternatives for management of wastes generated by the formerly utilized sites remedial action program and supplement

    International Nuclear Information System (INIS)

    Gilbert, T.L.; Peterson, J.M.; Vocke, R.W.; Alexander, J.K.

    1983-03-01

    Alternatives for disposal or stabilization of the wastes generated by the US Department of Energy's Formerly Utilized Sites Remedial Action Program (FUSRAP) are identified and compared, with emphasis on the long-term aspects. These wastes consist of soil material and rubble containing trace amounts of radionuclides. A detailed pathway analysis for the dose to the maximally exposed individual is carried out using an adaptation of the natural analogue method. Comparisons of the different alternatives, based on the results of the pathway analysis and qualitative cost considerations, indicate that, if the hazard is such that the wastes must be removed and disposed of rather than stabilized in place, disposal by immediate dispersal is preferable to containment, and containment followed by slow planned dispersal is preferable to containment without dispersal. The Supplement presents refinements of work that was reported at the 1982 International Decommissioning Symposium. The new material consists of revisions of the estimates of the predicted potential dose to the maximally exposed individual and a more detailed comparative assessment of the radiological impacts of alternatives for management of wastes generated by the US Department of Energy's Formerly Utilized Sites Remedial Action Program (FUSRAP)

  12. Next Generation Nuclear Plant Materials Research and Development Program Plan, Revision 4

    Energy Technology Data Exchange (ETDEWEB)

    G.O. Hayner; R.L. Bratton; R.E. Mizia; W.E. Windes; W.R. Corwin; T.D. Burchell; C.E. Duty; Y. Katoh; J.W. Klett; T.E. McGreevy; R.K. Nanstad; W. Ren; P.L. Rittenhouse; L.L. Snead; R.W. Swindeman; D.F. Wlson

    2007-09-01

    DOE has selected the High Temperature Gas-cooled Reactor (HTGR) design for the Next Generation Nuclear Plant (NGNP) Project. The NGNP will demonstrate the use of nuclear power for electricity and hydrogen production. It will have an outlet gas temperature in the range of 950°C and a plant design service life of 60 years. The reactor design will be a graphite moderated, helium-cooled, prismatic or pebble-bed reactor and use low-enriched uranium, TRISO-coated fuel. The plant size, reactor thermal power, and core configuration will ensure passive decay heat removal without fuel damage or radioactive material releases during accidents. The NGNP Materials Research and Development (R&D) Program is responsible for performing R&D on likely NGNP materials in support of the NGNP design, licensing, and construction activities. Some of the general and administrative aspects of the R&D Plan include: • Expand American Society of Mechanical Engineers (ASME) Codes and American Society for Testing and Materials (ASTM) Standards in support of the NGNP Materials R&D Program. • Define and develop inspection needs and the procedures for those inspections. • Support selected university materials related R&D activities that would be of direct benefit to the NGNP Project. • Support international materials related collaboration activities through the DOE sponsored Generation IV International Forum (GIF) Materials and Components (M&C) Project Management Board (PMB). • Support document review activities through the Materials Review Committee (MRC) or other suitable forum.

  13. A visual basic program to generate sediment grain-size statistics and to extrapolate particle distributions

    Science.gov (United States)

    Poppe, L.J.; Eliason, A.H.; Hastings, M.E.

    2004-01-01

    Measures that describe and summarize sediment grain-size distributions are important to geologists because of the large amount of information contained in textural data sets. Statistical methods are usually employed to simplify the necessary comparisons among samples and quantify the observed differences. The two statistical methods most commonly used by sedimentologists to describe particle distributions are mathematical moments (Krumbein and Pettijohn, 1938) and inclusive graphics (Folk, 1974). The choice of which of these statistical measures to use is typically governed by the amount of data available (Royse, 1970). If the entire distribution is known, the method of moments may be used; if the next to last accumulated percent is greater than 95, inclusive graphics statistics can be generated. Unfortunately, earlier programs designed to describe sediment grain-size distributions statistically do not run in a Windows environment, do not allow extrapolation of the distribution's tails, or do not generate both moment and graphic statistics (Kane and Hubert, 1963; Collias et al., 1963; Schlee and Webster, 1967; Poppe et al., 2000)1.Owing to analytical limitations, electro-resistance multichannel particle-size analyzers, such as Coulter Counters, commonly truncate the tails of the fine-fraction part of grain-size distributions. These devices do not detect fine clay in the 0.6–0.1 μm range (part of the 11-phi and all of the 12-phi and 13-phi fractions). Although size analyses performed down to 0.6 μm microns are adequate for most freshwater and near shore marine sediments, samples from many deeper water marine environments (e.g. rise and abyssal plain) may contain significant material in the fine clay fraction, and these analyses benefit from extrapolation.The program (GSSTAT) described herein generates statistics to characterize sediment grain-size distributions and can extrapolate the fine-grained end of the particle distribution. It is written in Microsoft

  14. Person-generated Data in Self-quantification. A Health Informatics Research Program.

    Science.gov (United States)

    Gray, Kathleen; Martin-Sanchez, Fernando J; Lopez-Campos, Guillermo H; Almalki, Manal; Merolli, Mark

    2017-01-09

    The availability of internet-connected mobile, wearable and ambient consumer technologies, direct-to-consumer e-services and peer-to-peer social media sites far outstrips evidence about the efficiency, effectiveness and efficacy of using them in healthcare applications. The aim of this paper is to describe one approach to build a program of health informatics research, so as to generate rich and robust evidence about health data and information processing in self-quantification and associated healthcare and health outcomes. The paper summarises relevant health informatics research approaches in the literature and presents an example of developing a program of research in the Health and Biomedical Informatics Centre (HaBIC) at the University of Melbourne. The paper describes this program in terms of research infrastructure, conceptual models, research design, research reporting and knowledge sharing. The paper identifies key outcomes from integrative and multiple-angle approaches to investigating the management of information and data generated by use of this Centre's collection of wearable, mobiles and other devices in health self-monitoring experiments. These research results offer lessons for consumers, developers, clinical practitioners and biomedical and health informatics researchers. Health informatics is increasingly called upon to make sense of emerging self-quantification and other digital health phenomena that are well beyond the conventions of healthcare in which the field of informatics originated and consolidated. To make a substantial contribution to optimise the aims, processes and outcomes of health self-quantification needs further work at scale in multi-centre collaborations for this Centre and for health informatics researchers generally.

  15. Thermonuclear generation program: risks and safety; Programa de geracao termonuclear: seus riscos e segurancas

    Energy Technology Data Exchange (ETDEWEB)

    Goes, Alexandre Gromann de Araujo

    1999-07-01

    This work deals with the fundamental concepts of risk and safety related to nuclear power generation. In the first chapter, a general evaluation of the various systems for energy generation and their environmental impacts is made. Some definitions for safety and risk are suggested, based on the already existing regulatory processes and also on the current tendencies of risk management. Aspects regarding the safety culture are commented. The International Nuclear Event Scale (INES), a coherent and clear mechanism of communication between nuclear specialists and the general public, is analyzed. The second chapter examines the thermonuclear generation program in Brazil and the role of the National Nuclear Energy Commission. The third chapter presents national and international scenarios in terms of safety and risks, available policies and the main obstacles for future development of nuclear energy and nuclear engineering, and strategies are proposed. In the last chapter, comments about possible trends and recommendations related to practical risk management procedures, taking into account rational criteria for resources distribution and risk reduction are made, envisaging a closer integration between nuclear specialists and the society as a whole, thus decreasing the conflicts in a democratic decision-making process.

  16. Comparison of two biomass-electricity generation technologies in Peninsular Malaysia using linear programming method

    International Nuclear Information System (INIS)

    Kumaran, P.; Hari, Z.; Boosroh, M.H.

    2006-01-01

    Two technologies have been considered to generate electricity using palm oil mill waste, the Empty Fruit Bunch (EFB) as power plant fuel. One technology is to build new 100% EFB fired power plants, located in the vicinity of the palm oil mill, in which the produced electricity would be connected to the national electricity grid system. The other technology is to transport all the available EFB fuel to an existing coal power station in which the EFB fuel would be blended with coal and co-fired in conventional coal power plant to produce electricity. A study intended to compare the difference between these two technologies, to obtain the same electricity generation, has been done. Linear programming software was used simulate the two technologies to generate 5% of Peninsular Malaysia's electricity demand in the year 2005. The study indicated that the co firing technology total cost is 43.7% cheaper than EFB technology and the fuel coat is competitive until transport cost reaches 78 RM/tone

  17. A computer program for quantification of SH groups generated after reduction of monoclonal antibodies

    Energy Technology Data Exchange (ETDEWEB)

    Escobar, Normando Iznaga; Morales, Alejo; Nunez, Gilda

    1996-07-01

    Reduction of disulfide bonds to sulfhydryl (SH) groups for direct radiolabeling of antibodies for immunoscintigraphic studies of colorectal and other cancers continues to be of considerable research interest. We have developed a general strategy and a versatile computer program for the quantification of the number of SH per molecule of antibody (Ab) generated after the treatment of monoclonal antibodies (MAbs) with reducing agents such as 2-mercaptoethanol (2-ME), stannous chloride (SnCl{sub 2}), dithiothreitol (DTT), dithioerythritol (DTE), ascorbic acid (AA), and the like. The program we describe here performs an unweighted least-squares regression analysis of the cysteine standard curve and interpolates the cysteine concentration of the samples. The number of SH groups per molecule of antibody in the 2-mercaptoethanol and in the other reducing agents was calculated from the cysteine standard curve using Ellman's reagent to develop the yellow color. The linear least-squares method fit the standard data with a high degree of accuracy and with the correlation coefficient r of 0.999. A program has been written for the IBM PC compatible computer utilizing a friendly menu to interact with the users. The package allows the user to change parameters of the assay, to calculate regression coefficients slope, intercept and its standard errors, to perform statistical analysis, together with detailed analysis of variance, and to produce an output of the results in a printed format.

  18. Programming of maternal and offspring disease: impact of growth restriction, fetal sex and transmission across generations.

    Science.gov (United States)

    Cheong, Jean N; Wlodek, Mary E; Moritz, Karen M; Cuffe, James S M

    2016-09-01

    Babies born small are at an increased risk of developing myriad adult diseases. While growth restriction increases disease risk in all individuals, often a second hit is required to unmask 'programmed' impairments in physiology. Programmed disease outcomes are demonstrated more commonly in male offspring compared with females, with these sex-specific outcomes partly attributed to different placenta-regulated growth strategies of the male and female fetus. Pregnancy is known to be a major risk factor for unmasking a number of conditions and can be considered a 'second hit' for women who were born small. As such, female offspring often develop impairments of physiology for the first time during pregnancy that present as pregnancy complications. Numerous maternal stressors can further increase the risk of developing a maternal complication during pregnancy. Importantly, these maternal complications can have long-term consequences for both the mother after pregnancy and the developing fetus. Conditions such as preeclampsia, gestational diabetes and hypertension as well as thyroid, liver and kidney diseases are all conditions that can complicate pregnancy and have long-term consequences for maternal and offspring health. Babies born to mothers who develop these conditions are often at a greater risk of developing disease in adulthood. This has implications as a mechanism for transmission of disease across generations. In this review, we discuss the evidence surrounding long-term intergenerational implications of being born small and/or experiencing stress during pregnancy on programming outcomes. © 2016 The Authors. The Journal of Physiology © 2016 The Physiological Society.

  19. A computer program for estimating the power-density spectrum of advanced continuous simulation language generated time histories

    Science.gov (United States)

    Dunn, H. J.

    1981-01-01

    A computer program for performing frequency analysis of time history data is presented. The program uses circular convolution and the fast Fourier transform to calculate power density spectrum (PDS) of time history data. The program interfaces with the advanced continuous simulation language (ACSL) so that a frequency analysis may be performed on ACSL generated simulation variables. An example of the calculation of the PDS of a Van de Pol oscillator is presented.

  20. Combining classifiers generated by multi-gene genetic programming for protein fold recognition using genetic algorithm.

    Science.gov (United States)

    Bardsiri, Mahshid Khatibi; Eftekhari, Mahdi; Mousavi, Reza

    2015-01-01

    In this study the problem of protein fold recognition, that is a classification task, is solved via a hybrid of evolutionary algorithms namely multi-gene Genetic Programming (GP) and Genetic Algorithm (GA). Our proposed method consists of two main stages and is performed on three datasets taken from the literature. Each dataset contains different feature groups and classes. In the first step, multi-gene GP is used for producing binary classifiers based on various feature groups for each class. Then, different classifiers obtained for each class are combined via weighted voting so that the weights are determined through GA. At the end of the first step, there is a separate binary classifier for each class. In the second stage, the obtained binary classifiers are combined via GA weighting in order to generate the overall classifier. The final obtained classifier is superior to the previous works found in the literature in terms of classification accuracy.

  1. Macro-assembler technique for generating control words for a micro-programmed processor

    International Nuclear Information System (INIS)

    Lesny, D.D.; Wray, J.J.

    1981-01-01

    To produce microcode for an experimental system, such as FASTBUS interfaces, with wide control words and many micro-fields, one needs a micro-assembler which (1) allows wide flexibility in defining defaults for microcode fields, (2) does a significant amount of error checking to prevent multiple or inconsistant definitions of fields, (3) allows macro expansions which define several microcode words for frequently used sequences, and (4) is easily modified as hardware definitions are refined. Using MACRO-11 on DEC PDP-11 computers, a library of macros has been created, which can be used to generate the 80-bit microcode words needed for a Unibus to FASTBUS micro-programmed interface and which meets the above requirements. The same technique could easily be used to develop libraries appropriate for other microcoded devices

  2. Program of thermoelectric generator testing and RTG degradation mechanisms evaluation. Progress report No. 38

    Energy Technology Data Exchange (ETDEWEB)

    Lockwood, A.; Shields, V.

    1980-11-01

    The n-type gadolinium selenide legs after 17,500 hours continue to show reasonable agreement with the 3M Co. published thermal conductivity data. Weight loss for both coated and uncoated Si-Ge material produced by G.E. are reported. No significant discrepancies with the results previously obtained on R.C.A. material from the MHW program have been found. Thermal conductivity measurements are also in agreement. The remaining MHW generator on test, Q1-A, has accumulated 26,800 hours and performance remains stable. The performance of the 18 couple modules S/N-1, S/N-2, and S/N-3 to date is summarized. Telemetry data indicate no changes in the trends of degradation of LES 8 and 9 and the Voyager RTGs.

  3. Generation IV Reactors Integrated Materials Technology Program Plan: Focus on Very High Temperature Reactor Materials

    Energy Technology Data Exchange (ETDEWEB)

    Corwin, William R [ORNL; Burchell, Timothy D [ORNL; Katoh, Yutai [ORNL; McGreevy, Timothy E [ORNL; Nanstad, Randy K [ORNL; Ren, Weiju [ORNL; Snead, Lance Lewis [ORNL; Wilson, Dane F [ORNL

    2008-08-01

    Since 2002, the Department of Energy's (DOE's) Generation IV Nuclear Energy Systems (Gen IV) Program has addressed the research and development (R&D) necessary to support next-generation nuclear energy systems. The six most promising systems identified for next-generation nuclear energy are described within this roadmap. Two employ a thermal neutron spectrum with coolants and temperatures that enable hydrogen or electricity production with high efficiency (the Supercritical Water Reactor-SCWR and the Very High Temperature Reactor-VHTR). Three employ a fast neutron spectrum to enable more effective management of actinides through recycling of most components in the discharged fuel (the Gas-cooled Fast Reactor-GFR, the Lead-cooled Fast Reactor-LFR, and the Sodium-cooled Fast Reactor-SFR). The Molten Salt Reactor (MSR) employs a circulating liquid fuel mixture that offers considerable flexibility for recycling actinides and may provide an alternative to accelerator-driven systems. At the inception of DOE's Gen IV program, it was decided to significantly pursue five of the six concepts identified in the Gen IV roadmap to determine which of them was most appropriate to meet the needs of future U.S. nuclear power generation. In particular, evaluation of the highly efficient thermal SCWR and VHTR reactors was initiated primarily for energy production, and evaluation of the three fast reactor concepts, SFR, LFR, and GFR, was begun to assess viability for both energy production and their potential contribution to closing the fuel cycle. Within the Gen IV Program itself, only the VHTR class of reactors was selected for continued development. Hence, this document will address the multiple activities under the Gen IV program that contribute to the development of the VHTR. A few major technologies have been recognized by DOE as necessary to enable the deployment of the next generation of advanced nuclear reactors, including the development and qualification of

  4. Test Program for Stirling Radioisotope Generator Hardware at NASA Glenn Research Center

    Science.gov (United States)

    Lewandowski, Edward J.; Bolotin, Gary S.; Oriti, Salvatore M.

    2015-01-01

    Stirling-based energy conversion technology has demonstrated the potential of high efficiency and low mass power systems for future space missions. This capability is beneficial, if not essential, to making certain deep space missions possible. Significant progress was made developing the Advanced Stirling Radioisotope Generator (ASRG), a 140-W radioisotope power system. A variety of flight-like hardware, including Stirling convertors, controllers, and housings, was designed and built under the ASRG flight development project. To support future Stirling-based power system development NASA has proposals that, if funded, will allow this hardware to go on test at the NASA Glenn Research Center. While future flight hardware may not be identical to the hardware developed under the ASRG flight development project, many components will likely be similar, and system architectures may have heritage to ASRG. Thus, the importance of testing the ASRG hardware to the development of future Stirling-based power systems cannot be understated. This proposed testing will include performance testing, extended operation to establish an extensive reliability database, and characterization testing to quantify subsystem and system performance and better understand system interfaces. This paper details this proposed test program for Stirling radioisotope generator hardware at NASA Glenn. It explains the rationale behind the proposed tests and how these tests will meet the stated objectives.

  5. Program for the Generation of MCNP Inputs from State Files of CAREM

    International Nuclear Information System (INIS)

    Leszczynski, Francisco; Lopasso, Edmundo; Villarino, E

    2000-01-01

    The objective of this work is the development and tests of detailed input data for the Monte Carlo program MCNP, to be able of model the core of CAREM reactor, with the detail included on the updated models, for having available a calculation system that allow the production of confident results to be compared with results obtained with the system used today for designing the CAREM reactor core (CONDOR-CITVAP).The model includes the possibility of temperature and coolant density, and temperature and numeric densities of fuel.The detail consists of 21 different fuel elements (symmetry 3) and 14 axial zones.Results of comparisons of reactivity and power pick factors are presented, between MCNP and CONDOR-CITVAP.On average, these results show an acceptable agreement for all the compared parameters.It is described, also, the interface CONDOR-CITVAP-MCNP program, that has been developed for generating inputs of materials for MCNP, from outputs of CONDOR and CITVAP, for different reactor states

  6. Programming of maternal and offspring disease: impact of growth restriction, fetal sex and transmission across generations

    Science.gov (United States)

    Cheong, Jean N.; Moritz, Karen M.; Cuffe, James S. M.

    2016-01-01

    Abstract Babies born small are at an increased risk of developing myriad adult diseases. While growth restriction increases disease risk in all individuals, often a second hit is required to unmask ‘programmed’ impairments in physiology. Programmed disease outcomes are demonstrated more commonly in male offspring compared with females, with these sex‐specific outcomes partly attributed to different placenta‐regulated growth strategies of the male and female fetus. Pregnancy is known to be a major risk factor for unmasking a number of conditions and can be considered a ‘second hit’ for women who were born small. As such, female offspring often develop impairments of physiology for the first time during pregnancy that present as pregnancy complications. Numerous maternal stressors can further increase the risk of developing a maternal complication during pregnancy. Importantly, these maternal complications can have long‐term consequences for both the mother after pregnancy and the developing fetus. Conditions such as preeclampsia, gestational diabetes and hypertension as well as thyroid, liver and kidney diseases are all conditions that can complicate pregnancy and have long‐term consequences for maternal and offspring health. Babies born to mothers who develop these conditions are often at a greater risk of developing disease in adulthood. This has implications as a mechanism for transmission of disease across generations. In this review, we discuss the evidence surrounding long‐term intergenerational implications of being born small and/or experiencing stress during pregnancy on programming outcomes. PMID:26970222

  7. Generating long-lived CD8(+) T-cell memory: Insights from epigenetic programs.

    Science.gov (United States)

    Dogra, Pranay; Ghoneim, Hazem E; Abdelsamed, Hossam A; Youngblood, Ben

    2016-07-01

    T-cell-based immunological memory has the potential to provide the host with life-long protection against pathogen reexposure and thus offers tremendous promise for the design of vaccines targeting chronic infections or cancer. In order to exploit this potential in the design of new vaccines, it is necessary to understand how and when memory T cells acquire their poised effector potential, and moreover, how they maintain these properties during homeostatic proliferation. To gain insight into the persistent nature of memory T-cell functions, investigators have turned their attention to epigenetic mechanisms. Recent efforts have revealed that many of the properties acquired among memory T cells are coupled to stable changes in DNA methylation and histone modifications. Furthermore, it has recently been reported that the delineating features among memory T cells subsets are also linked to distinct epigenetic events, such as permissive and repressive histone modifications and DNA methylation programs, providing exciting new hypotheses regarding their cellular ancestry. Here, we review recent studies focused on epigenetic programs acquired during effector and memory T-cell differentiation and discuss how these data may shed new light on the developmental path for generating long-lived CD8(+) T-cell memory. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Planning and Programming of Education and Training Courses on the Radiation Fusion Technologies for Next Generations

    International Nuclear Information System (INIS)

    Kim, Jin Kyu; Nam, Y. M.; Choi, P. H.

    2009-06-01

    In order to program education and training courses on the radiation technologies and to have the WNU RT School to be held in Korea, this project was carried out. It was also done to make a strategy for running the programmed courses, and to build and knit a global network among radiation specialists such as international advisory board, domestic advisory board and steering committee. A plan for the WNU RT School in Korea was made under this project. Curricula in all subjects related to radiation technology and the lecture materials were prepared, which are essential for education and training courses on radiation technologies for next generations. Lecturers were selected among global CEOs and professionals in radiation industries and university professors and radiation specialists. In addition, a global network among radiation specialists such as international advisory board, domestic advisory board and steering committee was built and organized. As a model for the international education and training courses in RT field as well as the other fields, it can be used for making fundamentals of technology exports and promoting Korea's national image in science and technology

  9. Auralization Architectures for NASA?s Next Generation Aircraft Noise Prediction Program

    Science.gov (United States)

    Rizzi, Stephen A.; Lopes, Leonard V.; Burley, Casey L.; Aumann, Aric R.

    2013-01-01

    Aircraft community noise is a significant concern due to continued growth in air traffic, increasingly stringent environmental goals, and operational limitations imposed by airport authorities. The assessment of human response to noise from future aircraft can only be afforded through laboratory testing using simulated flyover noise. Recent work by the authors demonstrated the ability to auralize predicted flyover noise for a state-of-the-art reference aircraft and a future hybrid wing body aircraft concept. This auralization used source noise predictions from NASA's Aircraft NOise Prediction Program (ANOPP) as input. The results from this process demonstrated that auralization based upon system noise predictions is consistent with, and complementary to, system noise predictions alone. To further develop and validate the auralization process, improvements to the interfaces between the synthesis capability and the system noise tools are required. This paper describes the key elements required for accurate noise synthesis and introduces auralization architectures for use with the next-generation ANOPP (ANOPP2). The architectures are built around a new auralization library and its associated Application Programming Interface (API) that utilize ANOPP2 APIs to access data required for auralization. The architectures are designed to make the process of auralizing flyover noise a common element of system noise prediction.

  10. Inspiring the Next Generation of Explorers: Scientist Involvement in the Expedition Earth and Beyond Program

    Science.gov (United States)

    Graff, Paige; Stefanov, William; Willis, Kim; Runco, Susan

    2012-01-01

    Scientists, science experts, graduate and even undergraduate student researchers have a unique ability to inspire the next generation of explorers. These science, technology, engineering, and mathematics (STEM) experts can serve as role models for students and can help inspire them to consider future STEM-related careers. They have an exceptional ability to instill a sense of curiosity and fascination in the minds of students as they bring science to life in the classroom. Students and teachers are hungry for opportunities to interact with scientists. They feel honored when these experts take time out of their busy day to share their science, their expertise, and their stories. The key for teachers is to be cognizant of opportunities to connect their students with scientists. For scientists, the key is to know how to get involved, to have options for participation that involve different levels of commitment, and to work with educational specialists who can help facilitate their involvement. The Expedition Earth and Beyond (EEAB) Program, facilitated by the Astromaterials Research and Exploration Science (ARES) Directorate at the NASA Johnson Space Center, is an Earth and planetary science education program designed to inspire, engage, and educate teachers and students by getting them actively involved with NASA exploration, discovery, and the process of science. One of the main goals of the program is to facilitate student research in the classroom. The program uses astronaut photographs, provided through the ARES Crew Earth Observations (CEO) payload on the International Space Station (ISS) as the hook to help students gain an interest in a research topic. Student investigations can focus on Earth or involve comparative planetology. Student teams are encouraged to use additional imagery and data from Earth or planetary orbital spacecraft, or ground-based data collection tools, to augment the astronaut photography dataset. A second goal of the program is to provide

  11. Development of user interface to support automatic program generation of nuclear power plant analysis by module-based simulation system

    International Nuclear Information System (INIS)

    Yoshikawa, Hidekazu; Mizutani, Naoki; Nakaya, Ken-ichiro; Wakabayashi, Jiro

    1988-01-01

    Module-based Simulation System (MSS) has been developed to realize a new software work environment enabling versatile dynamic simulation of a complex nuclear power system flexibly. The MSS makes full use of modern software technology to replace a large fraction of human software works in complex, large-scale program development by computer automation. Fundamental methods utilized in MSS and developmental study on human interface system SESS-1 to help users in generating integrated simulation programs automatically are summarized as follows: (1) To enhance usability and 'communality' of program resources, the basic mathematical models of common usage in nuclear power plant analysis are programed as 'modules' and stored in a module library. The information on usage of individual modules are stored in module database with easy registration, update and retrieval by the interactive management system. (2) Target simulation programs and the input/output files are automatically generated with simple block-wise languages by a precompiler system for module integration purpose. (3) Working time for program development and analysis in an example study of an LMFBR plant thermal-hydraulic transient analysis was demonstrated to be remarkably shortened, with the introduction of an interface system SESS-1 developed as an automatic program generation environment. (author)

  12. U.S. next generation safeguards initiative: the human capital development program

    International Nuclear Information System (INIS)

    Scholz, M.A.

    2013-01-01

    The Human Capital Development (HCD) subprogram of the U.S. Next Generation Safeguards Initiative (NGSI) is developing sustainable academic and technical programs that support the recruitment, education, training, and retention of the next generation of international safeguards professionals. This wide-ranging HCD effort endeavors to develop additional human resources to address current shortfalls, encourage U.S. experts to seek employment at the IAEA, and identify and train a new cadre of safeguards experts to meet the needs of both the United States and the IAEA for decades to come. In recent years, a convergence of factors has challenged the IAEA's ability to carry out its safeguards mission effectively. A staffing study shows that less than 20% of the international safeguards specialists in the U.S. workforce are 44 years of age or younger and that over 80% of the international safeguards specialists at the National Laboratories will be retired or otherwise resigned within 15 years. An aging workforce nearing retirement and growing workload, coupled with a safeguards budget that has remained essentially flat in real terms for nearly two decades, have posed particular challenges to the IAEA's Department of Safeguards. Recognizing the trends, the National Nuclear Security Administration's (NNSA) Office of Nonproliferation and International Security (NIS) launched NGSI in the fall of 2007. Since that time, the HCD subprogram of NGSI has sponsored over 300 safeguards internships at U.S. National Labs, organized eight annual short safeguards policy and technical courses, worked with ten universities to develop new undergraduate and graduate course-work on international safeguards and nonproliferation, established a highly competitive graduate fellowship program, and completed a human capital requirements study that closely examined the safeguards workforce within the U.S. National Lab complex. Of past NGSI students and interns, nearly four in ten pursue multiple NGSI

  13. FY 2008 Next Generation Safeguards Initiative International Safeguards Education and Training Pilot Programs Summary Report

    International Nuclear Information System (INIS)

    Dreicer, M.; Anzelon, G.; Essner, J.; Dougan, A.; Doyle, J.; Boyer, B.; Hypes, P.; Sokova, E.; Wehling, F.

    2008-01-01

    Key component of the Next Generation Safeguards Initiative (NGSI) launched by the National Nuclear Security Administration is the development of human capital to meet present and future challenges to the safeguards regime. An effective university-level education in safeguards and related disciplines is an essential element in a layered strategy to rebuild the safeguards human resource capacity. Two pilot programs at university level, involving 44 students, were initiated and implemented in spring-summer 2008 and linked to hands-on internships at LANL or LLNL. During the internships, students worked on specific safeguards-related projects with a designated Laboratory Mentor to provide broader exposure to nuclear materials management and information analytical techniques. The Safeguards and Nuclear Material Management pilot program was a collaboration between the Texas A and M University (TAMU), Los Alamos National Laboratory (LANL) and Lawrence Livermore National Laboratory (LLNL). It included a 16-lecture course held during a summer internship program. The instructors for the course were from LANL together with TAMU faculty and LLNL experts. The LANL-based course was shared with the students spending their internship at LLNL via video conference. A week-long table-top (or hands-on) exercise on was also conducted at LANL. The student population was a mix of 28 students from a 12 universities participating in a variety of summer internship programs held at LANL and LLNL. A large portion of the students were TAMU students participating in the NGSI pilot. The International Nuclear Safeguards Policy and Information Analysis pilot program was implemented at the Monterey Institute for International Studies (MIIS) in cooperation with LLNL. It included a two-week intensive course consisting of 20 lectures and two exercises. MIIS, LLNL, and speakers from other U.S. national laboratories (LANL, BNL) delivered lectures for the audience of 16 students. The majority of students

  14. Aging management program of the reactor building concrete at Point Lepreau Generating Station

    Directory of Open Access Journals (Sweden)

    Gendron T.

    2011-04-01

    Full Text Available In order for New Brunswick Power Nuclear (NBPN to control the risks of degradation of the concrete reactor building at the Point Lepreau Generating Station (PLGS the development of an aging management plan (AMP was initiated. The intention of this plan was to determine the requirements for specific structural components of concrete of the reactor building that require regular inspection and maintenance to ensure the safe and reliable operation of the plant. The document is currently in draft form and presents an integrated methodology for the application of an AMP for the concrete of the reactor building. The current AMP addresses the reactor building structure and various components, such as joint sealant and liners that are integral to the structure. It does not include internal components housed within the structure. This paper provides background information regarding the document developed and the strategy developed to manage potential degradation of the concrete of the reactor building, as well as specific programs and preventive and corrective maintenance activities initiated.

  15. GENERATING LONG-LIVED CD8 T CELL MEMORY: INSIGHTS FROM EPIGENETIC PROGRAMS

    Science.gov (United States)

    Dogra, Pranay; Ghoneim, Hazem E.; Abdelsamed, Hossam A.; Youngblood, Ben

    2016-01-01

    T cell based immunological memory has the potential to provide the host with life-long protection against pathogen re-exposure and thus offers tremendous promise for the design of vaccines targeting chronic infections or cancer. In order to exploit this potential in the design of new vaccines it is necessary to understand how and when memory T cells acquire their poised effector potential, and moreover, how they maintain these properties during homeostatic proliferation. To gain insight into the persistent nature of memory T cell functions, investigators have turned their attention to epigenetic mechanisms. Recent efforts have revealed that many of the properties acquired among memory T cells are coupled to stable changes in DNA methylation and histone modifications. Furthermore, it has recently been reported that the delineating features among memory T cells subsets are also linked to distinct epigenetic events providing exciting new hypotheses regarding their cellular ancestry. Here we review recent studies focused on epigenetic programs acquired during effector and memory T cell differentiation and discuss how these data may shed new light on the developmental path for generating long-lived CD8 T cell memory. PMID:27230488

  16. Quantum Mechanical Energy-based Screening of Combinatorially Generated Library of Tautomers. TauTGen. A Tautomer Generator Program

    Energy Technology Data Exchange (ETDEWEB)

    Haranczyk, Maciej; Gutowski, Maciej S

    2007-03-01

    Many computational methods have been derived from quantum mechanics for molecular and extended systems. We advocate that these methods will soon become indispensable research tools of combinatorial chemistry. Although applications of these combinatorial methods driven by quantum-mechanics-derived computational engines seem to be distant, our recent experience suggests the opposite. We developed algorithms and codes to search for the most stable tautomers of molecules. In our approach, we: (i) create large libraries of molecular tautomers using combinatorial methods, and (ii) prescreen these libraries using quantum chemical electronic structure methods. We have identified many adiabatically bound and previously unknown tautomers of anionic nucleic acid bases. Our results unraveled that ordering of nucleic acid bases according to their affinity to an excess electron is: G > U > T > C > A , when all biologically relevant tautomers are considered. Acknowledgements This work was supported by the: (i) US DOE Office of Biological and Environmental Research, Low Dose Radiation Research Program (M.G.) and (ii) Polish State Committee for Scientific Research (KBN) Grant DS/8221-4-0140-4 (M.H.). M.H. thanks for financial support from the European Union Social Funds ZPORR/2.22/II/2.6/ARP/U/2/O5. M.H. is a holder of the award from the Fundation for Polish Science (FNP). R.A.B. acknowledges the financial support from Nanoquant EC Marie Curie Research Training Network, contract number: MRTN-506842. Computing resources were available through: (i) the Academic Computer Center in Gdansk (TASK) (ii) a Computational Grand Challenge Application grant from the Molecular Sciences Computing Facility (MSCF) in the Environmental Molecular Sciences Laboratory located at the Pacific Northwest National Laboratory, and (iii) the National Energy Research Scientific Computing Center (NERSC). The MSCF is funded by DOE’s Office of Biological and Environmental Research. PNNL is operated by Battelle

  17. Coincident steam generator tube rupture and stuck-open safety relief valve carryover tests: MB-2 steam generator transient response test program

    International Nuclear Information System (INIS)

    Garbett, K.; Mendler, O.J.; Gardner, G.C.; Garnsey, R.; Young, M.Y.

    1987-03-01

    In PWR steam generator tube rupture (SGTR) faults, a direct pathway for the release of radioactive fission products can exist if there is a coincident stuck-open safety relief valve (SORV) or if the safety relief valve is cycled. In addition to the release of fission products from the bulk steam generator water by moisture carryover, there exists the possibility that some primary coolant may be released without having first mixed with the bulk water - a process called primary coolant bypassing. The MB-2 Phase II test program was designed specifically to identify the processes for droplet carryover during SGTR faults and to provide data of sufficient accuracy for use in developing physical models and computer codes to describe activity release. The test program consisted of sixteen separate tests designed to cover a range of steady-state and transient fault conditions. These included a full SGTR/SORV transient simulation, two SGTR overfill tests, ten steady-state SGTR tests at water levels ranging from very low levels in the bundle up to those when the dryer was flooded, and three moisture carryover tests without SGTR. In these tests the influence of break location and the effect of bypassing the dryer were also studied. In a final test the behavior with respect to aerosol particles in a dry steam generator, appropriate to a severe accident fault, was investigated

  18. The ASSURE Summer REU Program: Introducing research to first-generation and underserved undergraduates through space sciences and engineering projects

    Science.gov (United States)

    Barron, Darcy; Peticolas, Laura; Multiverse Team at UC Berkeley's Space Sciences Lab

    2018-01-01

    The Advancing Space Science through Undergraduate Research Experience (ASSURE) summer REU program is an NSF-funded REU site at the Space Sciences Lab at UC Berkeley that first started in summer 2014. The program recruits students from all STEM majors, targeting underserved students including community college students and first-generation college students. The students have little or no research experience and a wide variety of academic backgrounds, but have a shared passion for space sciences and astronomy. We will describe our program's structure and the components we have found successful in preparing and supporting both the students and their research advisors for their summer research projects. This includes an intensive first week of introductory lectures and tutorials at the start of the program, preparing students for working in an academic research environment. The program also employs a multi-tiered mentoring system, with layers of support for the undergraduate student cohort, as well as graduate student and postdoctoral research advisors.

  19. 40 CFR 761.185 - Certification program and retention of records by importers and persons generating PCBs in...

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Certification program and retention of records by importers and persons generating PCBs in excluded manufacturing processes. 761.185 Section 761.185 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT POLYCHLORINATED BIPHENYLS (PCBs)...

  20. Looked after or Left Behind: The Effectiveness of Principal Preparation Programs as Perceived by Generation Y Principals

    Science.gov (United States)

    Sledge, Chandra

    2013-01-01

    This research study intended to discover the perceptions of 10 Illinois Generation Y novice high school principals pertaining to the effectiveness of their principal preparation programs in terms of how well it prepared them to lead in the first three years of their principalship, and what subsequent professional development they deemed necessary…

  1. Mixed-integer programming methods for transportation and power generation problems

    Science.gov (United States)

    Damci Kurt, Pelin

    This dissertation conducts theoretical and computational research to solve challenging problems in application areas such as supply chain and power systems. The first part of the dissertation studies a transportation problem with market choice (TPMC) which is a variant of the classical transportation problem in which suppliers with limited capacities have a choice of which demands (markets) to satisfy. We show that TPMC is strongly NP-complete. We consider a version of the problem with a service level constraint on the maximum number of markets that can be rejected and show that if the original problem is polynomial, its cardinality-constrained version is also polynomial. We propose valid inequalities for mixed-integer cover and knapsack sets with variable upper bound constraints, which appear as substructures of TPMC and use them in a branch-and-cut algorithm to solve this problem. The second part of this dissertation studies a unit commitment (UC) problem in which the goal is to minimize the operational cost of power generators over a time period subject to physical constraints while satisfying demand. We provide several exponential classes of multi-period ramping and multi-period variable upper bound inequalities. We prove the strength of these inequalities and describe polynomial-time separation algorithms. Computational results show the effectiveness of the proposed inequalities when used as cuts in a branch-and-cut algorithm to solve the UC problem. The last part of this dissertation investigates the effects of uncertain wind power on the UC problem. A two-stage robust model and a three-stage stochastic program are compared.

  2. Next Generation Safeguards Initiative: Overview and Policy Context of UF6 Cylinder Tracking Program

    Energy Technology Data Exchange (ETDEWEB)

    Boyer, Brian D [Los Alamos National Laboratory; Whitaker, J. Michael [ORNL; White-Horton, Jessica L. [ORNL; Durbin, Karyn R. [NNSA

    2012-07-12

    Thousands of cylinders containing uranium hexafluoride (UF{sub 6}) move around the world from conversion plants to enrichment plants to fuel fabrication plants, and their contents could be very useful to a country intent on diverting uranium for clandestine use. Each of these large cylinders can contain close to a significant quantity of natural uranium (48Y cylinder) or low-enriched uranium (LEU) (30B cylinder) defined as 75 kg {sup 235}U which can be further clandestinely enriched to produce 1.5 to 2 significant quantities of high enriched uranium (HEU) within weeks or months depending on the scale of the clandestine facility. The National Nuclear Security Administration (NNSA) Next Generation Safeguards Initiative (NGSI) kicked off a 5-year plan in April 2011 to investigate the concept of a unique identification system for UF{sub 6} cylinders and potentially to develop a cylinder tracking system that could be used by facility operators and the International Atomic Energy Agency (IAEA). The goal is to design an integrated solution beneficial to both industry and inspectorates that would improve cylinder operations at the facilities and provide enhanced capabilities to deter and detect both diversion of low-enriched uranium and undeclared enriched uranium production. The 5-year plan consists of six separate incremental tasks: (1) define the problem and establish the requirements for a unique identification (UID) and monitoring system; (2) develop a concept of operations for the identification and monitoring system; (3) determine cylinder monitoring devices and technology; (4) develop a registry database to support proof-of-concept demonstration; (5) integrate that system for the demonstration; and (6) demonstrate proof-of-concept. Throughout NNSA's performance of the tasks outlined in this program, the multi-laboratory team emphasizes that extensive engagement with industry stakeholders, regulatory authorities and inspectorates is essential to its success.

  3. How Am I Driving? Using Genetic Programming to Generate Scoring Functions for Urban Driving Behavior

    Directory of Open Access Journals (Sweden)

    Roberto López

    2018-04-01

    Full Text Available Road traffic injuries are a serious concern in emerging economies. Their death toll and economic impact are shocking, with 9 out of 10 deaths occurring in low or middle-income countries; and road traffic crashes representing 3% of their gross domestic product. One way to mitigate these issues is to develop technology to effectively assist the driver, perhaps making him more aware about how her (his decisions influence safety. Following this idea, in this paper we evaluate computational models that can score the behavior of a driver based on a risky-safety scale. Potential applications of these models include car rental agencies, insurance companies or transportation service providers. In a previous work, we showed that Genetic Programming (GP was a successful methodology to evolve mathematical functions with the ability to learn how people subjectively score a road trip. The input to this model was a vector of frequencies of risky maneuvers, which were supposed to be detected in a sensor layer. Moreover, GP was shown, even with statistical significance, to be better than six other Machine Learning strategies, including Neural Networks, Support Vector Regression and a Fuzzy Inference system, among others. A pending task, since then, was to evaluate if a more detailed comparison of different strategies based on GP could improve upon the best GP model. In this work, we evaluate, side by side, scoring functions evolved by three different variants of GP. In the end, the results suggest that two of these strategies are very competitive in terms of accuracy and simplicity, both generating models that could be implemented in current technology that seeks to assist the driver in real-world scenarios.

  4. Aboriginal Children and Their Caregivers Living with Low Income: Outcomes from a Two-Generation Preschool Program.

    Science.gov (United States)

    Benzies, Karen; Tough, Suzanne; Edwards, Nancy; Mychasiuk, Richelle; Donnelly, Carlene

    2011-06-01

    The development of preschool children of Aboriginal heritage is jeopardized by the inter-generational transmission of risk that has created, and continues to create, social disadvantage. Early intervention programs are intended to mitigate the impact of social disadvantage. Yet, evidence of the effectiveness of these programs for children of Aboriginal heritage is limited. The purpose of this study was to examine the effects of a two-generation, multi-cultural preschool program on 45 children of Aboriginal heritage and their caregivers. We used a single-group, pretest (program intake)/posttest (program exit) design with follow-up when the children were 7 years old. We used an observational measure of child receptive language (Peabody Picture Vocabulary Test-III) and caregiver-reported measures of child development (Nipissing District Developmental Screen), risk for child maltreatment (Adult-Adolescent Parenting Inventory; AAPI), parenting stress (Parenting Stress Index; PSI), self-esteem (Rosenberg Self-Esteem scale; RSE), and life skills (Community Life Skills scale; CLS). Using paired t-tests we found statistically significant increases in child receptive language scores between intake and exit, and repeated-measures ANOVA showed that these improvements were maintained up to age 7 years. For caregivers, Pearson's correlations demonstrated that risk for child maltreatment, parenting stress, self-esteem, and life skills were stable over time. Results of this study suggest that children of Aboriginal heritage can benefit from participation in a two-generation, multi-cultural preschool program. Their caregivers may have received greater benefit if issues of intergenerational transmission of the negative influences of residential schools were addressed as part of programming.

  5. PROBABILISTIC PROGRAMMING FOR ADVANCED MACHINE LEARNING (PPAML) DISCRIMINATIVE LEARNING FOR GENERATIVE TASKS (DILIGENT)

    Science.gov (United States)

    2017-11-29

    the corresponding statistical quantities is formulated according to its definition , which involves the corresponding Fredholm integral equation. This...generative and discriminative areas: • Generative models: a novel framework for most accurate computation of key statistical elements of model...and data-driven ones: • Generative models: a novel framework for most accurate computation of key statistical elements of model-driven problems (such

  6. Klenot near-Earth-object follow-up program --- next generation

    Science.gov (United States)

    Ticha, J.; Tichy, M.; Kocer, M.; Honkova, M.

    2014-07-01

    NEO research is a great challenge just now --- for science, for exploration, and for planetary defence. Therefore NEO discoveries, astrometric follow-up, orbit computations as well as physical studies are of high interest both to science community and humankind. The KLENOT Project of the Klet Observatory, South Bohemia, Czech Republic, has pursued the confirmation, early follow-up, long-arc follow-up and recovery of Near Earth Objects since 2002. Tens of thousands astrometric measurements has helped to improve the inventory of NEOs as well as to understand the NEO population. It was ranked among the world most prolific professional NEO follow-up programmes during its first phase from 2002 to 2008. A fundamental improvement of the 1.06-m KLENOT Telescope was started in autumn 2008. A new computer controlled paralactic mount was built to substantially increase telescope-time efficiency, the number of observations, their accuracy and limiting magnitude. The testing observations of the KLENOT Telescope Next Generation were started in October 2011. The new more efficient CCD camera FLI ProLine 230 was installed in summer 2013. The original Klet Software Package has been continually upgraded over the past two decades of operation. Along with huge hardware changes we have decided for essential changes in software and the whole KLENOT work-flow. Using the current higher computing power available, enhancing and updating our databases and astrometry program, the core of our software package, will prove highly beneficial. Moreover, the UCAC4 as the more precise astrometric star catalog was implemented. Both the system and strategy for the NEO follow-up observation used in the framework of the KLENOT Project are described here, including methods for selecting useful and important targets for NEO follow-up astrometry. Methods and techniques used for the KLENOT Project are also discussed. Sources of particular inaccuracies of astrometric measurements as input data for orbit

  7. Analysis of chemotherapy response programs in ovarian cancers by the next-generation sequencing technologies.

    Science.gov (United States)

    Cheng, Lihua; Lu, Wei; Kulkarni, Bhushan; Pejovic, Tanja; Yan, Xiaowei; Chiang, Jung-Hsien; Hood, Leroy; Odunsi, Kunle; Lin, Biaoyang

    2010-05-01

    To understand the chemotherapy response program in ovarian cancer cells at deep transcript sequencing levels. Two next-generation sequencing technologies--MPSS (massively parallel signature sequencing) and SBS (sequencing by synthesis)--were used to sequence the transcripts of IGROV1 and IGROV1-CP cells, and to sequence the transcripts of a highly chemotherapy responsive and a highly chemotherapy resistant ovarian cancer tissue. We identified 3422 signatures (2957 genes) that are significantly different between IGROV1 and IGROV1-CP cells (P<0.001). Gene Ontology (GO) term GO:0001837 (epithelial-to-mesenchymal transition) and GO:0034330 (cell junction assembly and maintenance) are enriched in genes that are over expressed in IGROV1-CP cells while apoptosis-related GO terms are enriched in genes over expressed in IGROV1 cells. We identified 1187 tags (corresponding to 1040 genes) that are differentially expressed between the chemotherapy responsive and the persistently chemotherapy resistant ovarian cancer tissues. GO term GO:0050673 (epithelial cell proliferation) and GO:0050678 (regulation of epithelial cell proliferation) are enriched in the genes over expressed in the chemotherapy resistant tissue while the GO:0007229 (integrin-mediated signaling pathway) is enriched in the genes over expressed in the chemotherapy sensitive tissue. An integrative analysis identified 111 common differentially expressed genes including two bone morphogenetic proteins (BMP4 and BMP7), six solute carrier proteins (SLC10A3, SLC16A3, SLC25A1, SLC35B3, SLC7A5 and SLC7A7), transcription factor POU5F1 (POU class 5 homeobox 1), and KLK10 (kallikrein-related peptidase 10). A network analysis revealed a subnetwork with three genes BMP7, NR2F2 and AP2B1 that were consistently over expressed in the chemoresistant tissue or cells compared to the chemosensitive tissue or cells. Our database offers the first comprehensive view of the digital transcriptomes of ovarian cancer cell lines and tissues

  8. Development of Program Evaluating the Effects on the Secondary Side of Steam Generator due to Foreign Objects

    International Nuclear Information System (INIS)

    Ju, Yoo Hyun; Nam, Choi Sung

    2005-01-01

    When materials such as metal are into the secondary side of steam generator, they, so called foreign objects, may have influences on the integrity of the steam generator tubes. They cause the tube wear due to the relative motion between the tubes and foreign objects and the tube impact due to flow. The best way to avoid the effects is to remove all the foreign objects. However, it is not easy to remove the foreign materials thoroughly due to their condition such as the location. If the locations of the foreign materials are in the middle of tube bundle and the tube arrangement of the steam generator is the triangle type, the equipment such as FOSAR(Foreign Object Search and Retrieval) can not reach their locations. If the foreign materials stick together with the tubes or tube sheet, they can not be removed. In the case of operating the steam generator with the foreign materials, the licensee must prove that the materials do not affect the tube integrity and do not threaten the pressure boundary with the analytical method. Considering the wear and impact by the foreign materials, KEPRI(Korea Electric Power Research Institute) developed the methodology to evaluate the foreign materials analytically. This methodology was described with a computer program in order to obtain the fast results. The program informs whether the tubes have the structural integrity when the foreign material strikes the tubes. Moreover, this gives us the remaining life of the steam generator tubes. In this paper, the program, which evaluates the effects of the foreign objects in the secondary side of steam generator, is introduced

  9. Warm fusion in Stratego - A case study in the generation of program transformation systems

    NARCIS (Netherlands)

    Johann, P.; Visser, Eelco

    2000-01-01

    Stratego is a domain-specific language for the specification of program transfor- mation systems. The design of Stratego is based on the paradigm of rewriting strategies: user-definable programs in a little language of strategy operators determine where and in what order transformation rules

  10. Branch-and-price for staff rostering: An efficient implementation using generic programming and nested column generation

    DEFF Research Database (Denmark)

    Dohn, Anders Høeg; Mason, Andrew

    2013-01-01

    that exploits the inherent problem structure. A very efficient implementation of this pricing problem is achieved by using generic programming principles in which careful use of the C++ pre-processor allows the generator to be customized for the target problem at compile-time. As well as decreasing run times....... Columns of the set partitioning problem are generated dynamically by solving a pricing subproblem, and constraint branching in a branch-and-bound framework is used to enforce integrality. The pricing problem is formulated as a novel three-stage nested shortest path problem with resource constraints...

  11. Formal on-the-job training programs at power generating stations

    Energy Technology Data Exchange (ETDEWEB)

    Hoch, R.R. [HGS, Inc., Ellicott City, MD (United States)

    1996-11-01

    On-the-Job Training (OJT) should be utilized for all posts in the stations. OJT for entry level positions should include training in many mundane areas that are often overlooked such as record keeping (log sheets and log books), proper communications and how to conduct himself or herself on the watch, during either emergency or routine situations. A separate OJT Program should be provided to prepare personnel to qualify for promotion to the next level. (Depending on any common agreements or bargaining unit contracts, OJT Programs can also be used to pre-qualify candidates for promotion to the next level.) By allowing the trainee to retain all OJT Program materials, it will also be available to him or her for continued reference or remedial training. (When an OJT Program is first instituted, it may be validated by issuing it to incumbent personnel and, subsequent, incorporating their comments or corrections.) This paper describes a formal OJT program.

  12. OTSGI--a program analysing two-phase flow instabilities in helical tubes of once-through steam generator

    International Nuclear Information System (INIS)

    Shi Shaoping; Zhou Fangde; Wang Maohua

    1998-01-01

    The author has studied the two-phases flow instabilities of the helical tubes of once-through steam generator. Using liner-frequency-domain analytical method, the authors have derived out a mathematical model and designed the program. In this model, the authors also have considered the thermal dynamic characteristics of the tube's wall. The program is used to calculate the threshold of the stability and the influences of some factors, such as entrance throttling coefficient, system pressure, entrance supercooling degree, et al. The outcomes are compared with other studies

  13. Factors affecting waste generation: a study in a waste management program in Dhaka City, Bangladesh.

    Science.gov (United States)

    Afroz, Rafia; Hanaki, Keisuke; Tudin, Rabaah

    2011-08-01

    Information on waste generation, socioeconomic characteristics, and willingness of the households to separate waste was obtained from interviews with 402 respondents in Dhaka city. Ordinary least square regression was used to determine the dominant factors that might influence the waste generation of the households. The results showed that the waste generation of the households in Dhaka city was significantly affected by household size, income, concern about the environment, and willingness to separate the waste. These factors are necessary to effectively improve waste management, growth and performance, as well as to reduce the environmental degradation of the household waste.

  14. Planning for the next generation of public health advocates: evaluation of an online advocacy mentoring program.

    Science.gov (United States)

    O'Connell, Emily; Stoneham, Melissa; Saunders, Julie

    2016-04-01

    Issue addressed Despite being viewed as a core competency for public health professionals, public health advocacy lacks a prominent place in the public health literature and receives minimal coverage in university curricula. The Public Health Advocacy Institute of Western Australia (PHAIWA) sought to fill this gap by establishing an online e-mentoring program for public health professionals to gain knowledge through skill-based activities and engaging in a mentoring relationship with an experienced public health advocate. This study is a qualitative evaluation of the online e-mentoring program. Methods Semi-structured interviews were conducted with program participants at the conclusion of the 12-month program to examine program benefits and determine the perceived contribution of individual program components to overall advocacy outcomes. Results Increased mentee knowledge, skills, level of confidence and experience, and expanded public health networks were reported. Outcomes were dependent on participants' level of commitment, time and location barriers, mentoring relationship quality, adaptability to the online format and the relevance of activities for application to participants' workplace context. Program facilitators had an important role through the provision of timely feedback and maintaining contact with participants. Conclusion An online program that combines public health advocacy content via skill-based activities with mentoring from an experienced public health advocate is a potential strategy to build advocacy capacity in the public health workforce. So what? Integrating advocacy as a core component of professional development programs will help counteract current issues surrounding hesitancy by public health professionals to proactively engage in advocacy, and ensure that high quality, innovative and effective advocacy leadership continues in the Australian public health workforce.

  15. Low Cost High Performance Generator Technology Program. Volume 5. Heat pipe topical, appendices

    International Nuclear Information System (INIS)

    1975-07-01

    Work performed by Dynatherm Corporation for Teledyne Isotopes during a program entitled ''Heat Pipe Fabrication, Associated Technical Support and Reporting'' is reported. The program was initiated on November 29, 1972; the main objectives were accomplished with the delivery of the heat pipes for the HPG. Life testing of selected heat pipe specimens is continuing to and beyond the present date. The program consisted of the following tasks: Heat Pipe Development of Process Definition; Prototype Heat Pipes for Fin Segment Test; HPG Heat Pipe Fabrication and Testing; Controlled Heat Pipe Life Test; and Heat Pipe Film Coefficient Determination

  16. Low Cost High Performance Generator Technology Program. Volume 5. Heat pipe topical, appendices

    Energy Technology Data Exchange (ETDEWEB)

    1975-07-01

    Work performed by Dynatherm Corporation for Teledyne Isotopes during a program entitled ''Heat Pipe Fabrication, Associated Technical Support and Reporting'' is reported. The program was initiated on November 29, 1972; the main objectives were accomplished with the delivery of the heat pipes for the HPG. Life testing of selected heat pipe specimens is continuing to and beyond the present date. The program consisted of the following tasks: Heat Pipe Development of Process Definition; Prototype Heat Pipes for Fin Segment Test; HPG Heat Pipe Fabrication and Testing; Controlled Heat Pipe Life Test; and Heat Pipe Film Coefficient Determination. (TFD)

  17. Genetic Programming for the Generation of Crisp and Fuzzy Rule Bases in Classification and Diagnosis of Medical Data

    DEFF Research Database (Denmark)

    Dounias, George; Tsakonas, Athanasios; Jantzen, Jan

    2002-01-01

    programming system for the generation of fuzzy rule-based systems. Two different medical domains are used to evaluate the models. The first field is the diagnosis of subtypes of Aphasia. Two models for crisp rule-bases are presented. The first one discriminates between four major types and the second attempts...... systems. Comparisons on the system's comprehensibility and the transparency are included. These comparisons include for the Aphasia domain, previous work consisted of two neural network models....

  18. Transportation risk assessment of radioactive wastes generated by the N-Reactor stabilization program at the Hanford Site, Washington

    International Nuclear Information System (INIS)

    Wheeler, T.

    1994-12-01

    The potential radiological and nonradiological risks associated with specific radioactive waste shipping campaigns at the Hanford Site are estimated. The shipping campaigns analyzed are associated with the transportation of wastes from the N-Reactor site at the 200-W Area, both within the Hanford Reservation, for disposal. The analysis is based on waste that would be generated from the N-Reactor stabilization program

  19. LTFR-4, Library Generated for Fast Reactor Design Program from JAERI Fast-Set Multigroup Constant

    International Nuclear Information System (INIS)

    Suzuki, Tomoo

    1971-01-01

    Nature of physical problem solved: The program processes JAERI-Fast group constants sets of less than 30-group and prepares a binary library tape for efficient usage by a series of related fast reactor design calculation programmes

  20. Comparison of L-system applications towards plant modelling, music rendering and score generation using visual language programming

    Science.gov (United States)

    Lim, Chen Kim; Tan, Kian Lam; Yusran, Hazwanni; Suppramaniam, Vicknesh

    2017-10-01

    Visual language or visual representation has been used in the past few years in order to express the knowledge in graphic. One of the important graphical elements is fractal and L-Systems is a mathematic-based grammatical model for modelling cell development and plant topology. From the plant model, L-Systems can be interpreted as music sound and score. In this paper, LSound which is a Visual Language Programming (VLP) framework has been developed to model plant to music sound and generate music score and vice versa. The objectives of this research has three folds: (i) To expand the grammar dictionary of L-Systems music based on visual programming, (ii) To design and produce a user-friendly and icon based visual language framework typically for L-Systems musical score generation which helps the basic learners in musical field and (iii) To generate music score from plant models and vice versa using L-Systems method. This research undergoes a four phases methodology where the plant is first modelled, then the music is interpreted, followed by the output of music sound through MIDI and finally score is generated. LSound is technically compared to other existing applications in the aspects of the capability of modelling the plant, rendering the music and generating the sound. It has been found that LSound is a flexible framework in which the plant can be easily altered through arrow-based programming and the music score can be altered through the music symbols and notes. This work encourages non-experts to understand L-Systems and music hand-in-hand.

  1. A system to generate Fortran programs for calculating configuration traces of angular momentum coupled product operators

    International Nuclear Information System (INIS)

    Chang, B.D.; Draayer, J.P.; Wong, S.S.M.

    1982-01-01

    Three steps are usually involved in setting up a problem for numerical solution, 1) deriving algebraic expressions, 2) programming the equations, and 3) debugging the codes. We report here on a code, called 'compiler' in what follows, which accepts as input standardized output from the CONTRACTION-JT-RECOUPLING program and produces, using additional information on the permutation symmetry of the operators from the CONTRACTION-BASIC-DIAGRAM program, a FORTRAN IV code for evaluating configuration traces of a product of angular momentum coupled operator. As output from the CONTRACTION-BASIC-DIAGRAM program and the CONTRACTION-JT-RECOUPLING program provide input to the compiler, these two programs must be run first for each distinct operator product. This input to the compiler determines the number of basic diagrams and, for each basic diagram, the associated permutation structure, the number of summation variables, the appropriate phases and statistical weight factors, and the angular momentum recoupling information. The operators themselves are assumed to be of standard form, such as hamiltonian or electromagnetic excitation operators; all defining matrix elements are considered to be input variables. The program sets up the trace evaluation code by translating this information into Fortran IV programs. It does this by mimicking the detailed logic an individual would use if assigned the same task. Certain specific procedures that are common to many cases, such as inputing the defining, matrix elements, are written as library subprograms. The compiler logic is structured but not rigid; optimization is attended to so the output codes will execute efficiently. (orig./HSI)

  2. Corporate core values and professional values of Generation Y from the perspective of the effectiveness of ethics programs

    Directory of Open Access Journals (Sweden)

    Stankiewicz Janina

    2017-05-01

    Full Text Available In order for a business activity to be ethical, one needs ethical employees. Nevertheless, the ongoing generational change leads to the situation in which the values and the resulting standards of ethical behavior that have been thus far embraced in the workplace may no longer be unacceptable or respected by young people that enter the labor market. The article sets out to answer the following questions: what place do core values occupy in ethics programs of businesses; is there any relationship between them and the professional values of employees; why take into account individual preferences of organization members in terms of value when developing the agenda of corporate values. An important point of the discussion has become the values shared by those entering the labor market (the so-called Generation Y, or millennials and the differences in this regard between them and the employees who have been pursuing their professional careers for years now (Generation X.

  3. Training the next generation of physician researchers - Vanderbilt Medical Scholars Program.

    Science.gov (United States)

    Brown, Abigail M; Chipps, Teresa M; Gebretsadik, Tebeb; Ware, Lorraine B; Islam, Jessica Y; Finck, Luke R; Barnett, Joey; Hartert, Tina V

    2018-01-04

    As highlighted in recent reports published by the Physician-Scientist Workforce Working Group at the National Institutes of Health, the percentage of physicians conducting research has declined over the past decade. Various programs have been put in place to support and develop current medical student interest in research to alleviate this shortage, including The Vanderbilt University School of Medicine Medical Scholars Program (MSP). This report outlines the long-term program goals and short-term outcomes on career development of MSP alumni, to shed light on the effectiveness of research training programs during undergraduate medical training to inform similar programs in the United States. MSP alumni were asked to complete an extensive survey assessing demographics, accomplishments, career progress, future career plans, and MSP program evaluation. Fifty-five (81%) MSP alumni responded, among whom 12 had completed all clinical training. The demographics of MSP alumni survey respondents are similar to those of all Vanderbilt medical students and medical students at all other Association of American Medical College (AAMC) medical schools. MSP alumni published a mean of 1.9 peer-reviewed manuscripts (95% CI:1.2, 2.5), and 51% presented at national meetings. Fifty-eight percent of respondents reported that MSP participation either changed their career goals or helped to confirm or refine their career goals. Results suggest that the MSP program both prepares students for careers in academic medicine and influences their career choices at an early juncture in their training. A longer follow-up period is needed to fully evaluate the long-term outcomes of some participants.

  4. Status and integration of the gas generation studies performed for the Hydrogen Safety Program

    International Nuclear Information System (INIS)

    Pederson, L.R.; Strachan, D.M.

    1993-02-01

    Waste in Tank 241-SY-101 on the Hanford Site generates and periodically releases hydrogen, nitrous oxide, and nitrogen gases. Studies have been conducted at several laboratories to determine the chemical mechanisms for the gas generation and release. Results from these studies are presented and integrated in an attempt to describe current understanding of the physical properties of the waste and the mechanisms of gas generation and retention. Existing tank data are consistent with the interpretation that gases are uniformly generated in the tank, released continuously from the convecting layer, and stored in the nonconvecting layer. Tank temperature measurements suggest that the waste consists of ''gobs'' of material that reach neutral buoyancy at different times. The activation energy of the rate limiting step of the gas generating process was calculated to be about 7 kJ/mol but measured in the laboratory at 80 to 100 kJ/mol. Based on observed temperature changes in the tank the activation energy is probably not higher than about 20 kJ/mol. Several simulated waste compositions have been devised for use in laboratory studies in the place of actual waste from Tank 241-SY-101. Data from these studies can be used to predict how the actual waste might behave when heated or diluted. Density evaluations do not confirm that heating waste at the bottom of the tank would induce circulation within the waste; however, heating may release gas bubbles by dissolving the solids to which the bubbles adhere. Gas generation studies on simulated wastes indicated that nitrous oxide and hydrogen yields are not particularly coupled. Solubility studies of nitrous oxide, the most soluble of the principal gaseous products, indicate it is unlikely that dissolved gases contribute substantially to the quantity of gas released during periodic events

  5. A High Performance Backend for Array-Oriented Programming on Next-Generation Processing Units

    DEFF Research Database (Denmark)

    Lund, Simon Andreas Frimann

    are analyzed and experimentally tested. Resulting in the design and implementation of Bohrium a runtime-system for transforming, scheduling and executing array-oriented programs. Multiple interfaces for existing languages such as Python, C++, C#, and F# have been built which utilize the backend. A suite...... and the efficient execution of them on high performance systems. This work investigates the requirements for, and the implementation of, a high performance backend supporting these goals. This involves an outline of the hardware available today, in the near future and how to program it for high performance....... The main challenge is to bridge the gaps between performance, productivity and portability. A declarative high-level array-oriented programming model is explored to achieve this goal and a backend implemented to support it. Different strategies to the backend design and application of optimizations...

  6. Advanced Wind Turbine Program Next Generation Turbine Development Project: June 17, 1997--April 30, 2005

    Energy Technology Data Exchange (ETDEWEB)

    GE Wind Energy, LLC

    2006-05-01

    This document reports the technical results of the Next Generation Turbine Development Project conducted by GE Wind Energy LLC. This project is jointly funded by GE and the U.S. Department of Energy's National Renewable Energy Laboratory.The goal of this project is for DOE to assist the U.S. wind industry in exploring new concepts and applications of cutting-edge technology in pursuit of the specific objective of developing a wind turbine that can generate electricity at a levelized cost of energy of $0.025/kWh at sites with an average wind speed of 15 mph (at 10 m height).

  7. Multi-Hundred Watt Radioisotope Thermoelectric Generator Program, LES 8/9 Program, MJS Program. Bi-monthly progress report, 1 September--31 October 1974

    Energy Technology Data Exchange (ETDEWEB)

    1974-01-01

    Significant events, activities and achievements on the MHW LES 8/9 and MJS Programs for the reporting period are reported. Topics discussed include programmatic, safety, systems, isotope heat source, converter, product assurance, acceptance testing, and converter fabrication. (TFD)

  8. The role of demand response in single and multi-objective wind-thermal generation scheduling: A stochastic programming

    International Nuclear Information System (INIS)

    Falsafi, Hananeh; Zakariazadeh, Alireza; Jadid, Shahram

    2014-01-01

    This paper focuses on using DR (Demand Response) as a means to provide reserve in order to cover uncertainty in wind power forecasting in SG (Smart Grid) environment. The proposed stochastic model schedules energy and reserves provided by both of generating units and responsive loads in power systems with high penetration of wind power. This model is formulated as a two-stage stochastic programming, where first-stage is associated with electricity market, its rules and constraints and the second-stage is related to actual operation of the power system and its physical limitations in each scenario. The discrete retail customer responses to incentive-based DR programs are aggregated by DRPs (Demand Response Providers) and are submitted as a load change price and amount offer package to ISO (Independent System Operator). Also, price-based DR program behavior and random nature of wind power are modeled by price elasticity concept of the demand and normal probability distribution function, respectively. In the proposed model, DRPs can participate in energy market as well as reserve market and submit their offers to the wholesale electricity market. This approach is implemented on a modified IEEE 30-bus test system over a daily time horizon. The simulation results are analyzed in six different case studies. The cost, emission and multiobjective functions are optimized in both without and with DR cases. The multiobjective generation scheduling model is solved using augmented epsilon constraint method and the best solution can be chosen by Entropy and TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) methods. The results indicate demand side participation in energy and reserve scheduling reduces the total operation costs and emissions. - Highlights: • Simultaneous participation of loads in both energy and reserve scheduling. • Environmental/economical scheduling of energy and reserve. • Using demand response for covering wind generation forecast

  9. Airspace Systems Program: Next Generation Air Transportation System Concepts and Technology Development FY2010 Project Plan Version 3.0

    Science.gov (United States)

    Kopardekar, Parimal H.

    2010-01-01

    This document describes the FY2010 plan for the management and execution of the Next Generation Air Transportation System (NextGen) Concepts and Technology Development (CTD) Project. The document was developed in response to guidance from the Airspace Systems Program (ASP), as approved by the Associate Administrator of the Aeronautics Research Mission Directorate (ARMD), and from guidelines in the Airspace Systems Program Plan. Congress established the multi-agency Joint Planning and Development Office (JPDO) in 2003 to develop a vision for the 2025 Next Generation Air Transportation System (NextGen) and to define the research required to enable it. NASA is one of seven agency partners contributing to the effort. Accordingly, NASA's ARMD realigned the Airspace Systems Program in 2007 to "directly address the fundamental research needs of the Next Generation Air Transportation System...in partnership with the member agencies of the JPDO." The Program subsequently established two new projects to meet this objective: the NextGen-Airspace Project and the NextGen-Airportal Project. Together, the projects will also focus NASA s technical expertise and world-class facilities to address the question of where, when, how and the extent to which automation can be applied to moving aircraft safely and efficiently through the NAS and technologies that address optimal allocation of ground and air technologies necessary for NextGen. Additionally, the roles and responsibilities of humans and automation influence in the NAS will be addressed by both projects. Foundational concept and technology research and development begun under the NextGen-Airspace and NextGen-Airportal projects will continue. There will be no change in NASA Research Announcement (NRA) strategy, nor will there be any change to NASA interfaces with the JPDO, Federal Aviation Administration (FAA), Research Transition Teams (RTTs), or other stakeholders

  10. Sensor-Based Programming of Central Pattern Generators in Humanoid Robots

    Directory of Open Access Journals (Sweden)

    Hamed Shahbazi

    2013-04-01

    Full Text Available In the present article, a method for generating curvilinear bipedal walking patterns is proposed which is able to generate rhythmic and periodic trajectories for a Nao soccer player robot. To do so, a programmable central pattern generator was used which was inspired from locomotion structures in vertebrate animals. In this paper, the programmable central pattern generators were extended and new Equations were added to make a curvilinear pattern for walking Nao robots on a specified circular curve. In addition, some specific Equations were added to the model to control the arms and synchronize them with the movement of the feet. The model uses some sensory inputs to obtain some feedback from the movement and adjust it conforming to the potential perturbations. Input sensory values consist of accelerator values and foot pressure sensor values located on the bottom of each foot. Feedback values can adopt walking to some desired specifications and compensate the effects of some types of perturbations. The proposed model has many benefits including smooth walking patterns and modulation during walking. This model can be extended and used in the Nao soccer player both for the standard platform and the 3D soccer simulation leagues of Robocup SPL competitions to train different types of motions.

  11. Overview of government and market driven programs for the promotion of renewable power generation

    International Nuclear Information System (INIS)

    Ackermann, T.; Andersson, G.; Soeder, L.

    2001-01-01

    This paper presents and briefly evaluates some existing government instruments and market schemes which support the development of renewable energy generation. The brief evaluation focuses on the incentives provided by the various instruments to reduce production costs. The instruments and schemes are: feed-in tariffs, net metering, bidding process, fixed quotas, green certificate trading, green power exchange, green pricing. (author)

  12. Success of First-Generation College Students in a Selective Doctor of Optometry Program

    Science.gov (United States)

    Joyce, Sharon T.

    2017-01-01

    What happens when former first-generation college (FGC) students successfully graduate from college and then aim for post-undergraduate education? The purpose of this dissertation is to compare differences between FGC students and non-FGC admissions profiles regarding end-of-first-year performance at UC Berkeley's School of Optometry. The aims of…

  13. Automated a complex computer aided design concept generated using macros programming

    Science.gov (United States)

    Rizal Ramly, Mohammad; Asrokin, Azharrudin; Abd Rahman, Safura; Zulkifly, Nurul Ain Md

    2013-12-01

    Changing a complex Computer Aided design profile such as car and aircraft surfaces has always been difficult and challenging. The capability of CAD software such as AutoCAD and CATIA show that a simple configuration of a CAD design can be easily modified without hassle, but it is not the case with complex design configuration. Design changes help users to test and explore various configurations of the design concept before the production of a model. The purpose of this study is to look into macros programming as parametric method of the commercial aircraft design. Macros programming is a method where the configurations of the design are done by recording a script of commands, editing the data value and adding a certain new command line to create an element of parametric design. The steps and the procedure to create a macro programming are discussed, besides looking into some difficulties during the process of creation and advantage of its usage. Generally, the advantages of macros programming as a method of parametric design are; allowing flexibility for design exploration, increasing the usability of the design solution, allowing proper contained by the model while restricting others and real time feedback changes.

  14. NASA Applied Sciences' DEVELOP National Program: Training the Next Generation of Remote Sensing Scientists

    Science.gov (United States)

    Childs, Lauren; Brozen, Madeline; Hillyer, Nelson

    2010-01-01

    Since its inception over a decade ago, the DEVELOP National Program has provided students with experience in utilizing and integrating satellite remote sensing data into real world-applications. In 1998, DEVELOP began with three students and has evolved into a nationwide internship program with over 200 students participating each year. DEVELOP is a NASA Applied Sciences training and development program extending NASA Earth science research and technology to society. Part of the NASA Science Mission Directorate s Earth Science Division, the Applied Sciences Program focuses on bridging the gap between NASA technology and the public by conducting projects that innovatively use NASA Earth science resources to research environmental issues. Project outcomes focus on assisting communities to better understand environmental change over time. This is accomplished through research with global, national, and regional partners to identify the widest array of practical uses of NASA data. DEVELOP students conduct research in areas that examine how NASA science can better serve society. Projects focus on practical applications of NASA s Earth science research results. Each project is designed to address at least one of the Applied Sciences focus areas, use NASA s Earth observation sources and meet partners needs. DEVELOP research teams partner with end-users and organizations who use project results for policy analysis and decision support, thereby extending the benefits of NASA science and technology to the public.

  15. Automated a complex computer aided design concept generated using macros programming

    International Nuclear Information System (INIS)

    Ramly, Mohammad Rizal; Asrokin, Azharrudin; Rahman, Safura Abd; Zulkifly, Nurul Ain Md

    2013-01-01

    Changing a complex Computer Aided design profile such as car and aircraft surfaces has always been difficult and challenging. The capability of CAD software such as AutoCAD and CATIA show that a simple configuration of a CAD design can be easily modified without hassle, but it is not the case with complex design configuration. Design changes help users to test and explore various configurations of the design concept before the production of a model. The purpose of this study is to look into macros programming as parametric method of the commercial aircraft design. Macros programming is a method where the configurations of the design are done by recording a script of commands, editing the data value and adding a certain new command line to create an element of parametric design. The steps and the procedure to create a macro programming are discussed, besides looking into some difficulties during the process of creation and advantage of its usage. Generally, the advantages of macros programming as a method of parametric design are; allowing flexibility for design exploration, increasing the usability of the design solution, allowing proper contained by the model while restricting others and real time feedback changes

  16. Risk-based inservice testing program modifications at Palo Verde nuclear generating station

    Energy Technology Data Exchange (ETDEWEB)

    Knauf, S.; Lindenlaub, B.; Linthicum, R.

    1996-12-01

    Arizona Public Service Company (APS) is investigating changes to the Palo Verde Inservice Testing (IST) Program that are intended to result in the reduction of the required test frequency for various valves in the American Society of Mechanical Engineers (ASME) Section XI IST program. The analytical techniques employed to select candidate valves and to demonstrate that these frequency reductions are acceptable are risk based. The results of the Palo Verde probabilistic risk assessment (PRA), updated in June 1994, and the risk significant determination performed as part of the implementation efforts for 10 CFR 50.65 (the maintenance rule) were used to select candidate valves for extended test intervals. Additional component level evaluations were conducted by an `expert panel.` The decision to pursue these changes was facilitated by the ASME Risk-Based Inservice Testing Research Task Force for which Palo Verde is participating as a pilot plant. The NRC`s increasing acceptance of cost beneficial licensing actions and risk-based submittals also provided incentive to seek these changes. Arizona Public Service is pursuing the risk-based IST program modification in order to reduce the unnecessary regulatory burden of the IST program through qualitative and quantitative analysis consistent with maintaining a high level of plant safety. The objectives of this project at Palo Verde are as follows: (1) Apply risk-based technologies to IST components to determine their risk significance (i.e., high or low). (2) Apply a combination of deterministic and risk-based methods to determine appropriate testing requirements for IST components including improvement of testing methods and frequency intervals for high-risk significant components. (3) Apply risk-based technologies to high-risk significant components identified by the {open_quotes}expert panel{close_quotes} and outside of the IST program to determine whether additional testing requirements are appropriate.

  17. Be Explicit: Geoscience Program Design to Prepare the Next Generation of Geoscientists

    Science.gov (United States)

    Mogk, D. W.

    2015-12-01

    The work of geoscientists is to engage inquiry, discovery and exploration of Earth history and processes, and increasingly, to apply this knowledge to the "grand challenges" that face humanity. Geoscience as a discipline is confronted with an incomplete geologic record, observations or data that are often ambiguous or uncertain, and a need to grasp abstract concepts such as temporal reasoning ('deep time'), spatial reasoning over many orders of magnitude, and complex system behavior. These factors provide challenges, and also opportunities, for training future geoscientists. Beyond disciplinary knowledge, it is also important to provide opportunities for students to engage the community of practice and demonstrate how to "be" a geoscientist. Inculcation of geoscience "ways of knowing" is a collective responsibility for geoscientists (teaching faculty and other professionals), at all instructional levels, in all geoscience disciplines, and for all students. A whole-student approach is recommended. Geoscience programs can be designed to focus on student success by explictly: 1) defining programmatic student learning outcomes , 2) embedding assessments throughout the program to demonstrate mastery, 3) aligning course sequences to reinforce and anticipate essential concepts/skills, 4) preparing students to be life-long learners; 5) assigning responsibilities to courses/faculty to ensure these goals have been met; 6) providing opportunities for students to "do" geoscience (research experiences), and 7) modeling professional behaviors in class, field, labs, and informal settings. Extracurricular departmental activities also contribute to student development such as journal clubs, colloquia, field trips, and internships. Successful design of geoscience department programs is informed by: the AGI Workforce program and Summit on the Future of Geoscience Education that define pathways for becoming a successful geoscientist; training in Geoethics; Geoscience Education

  18. HLYWD: a program for post-processing data files to generate selected plots or time-lapse graphics

    International Nuclear Information System (INIS)

    Munro, J.K. Jr.

    1980-05-01

    The program HLYWD is a post-processor of output files generated by large plasma simulation computations or of data files containing a time sequence of plasma diagnostics. It is intended to be used in a production mode for either type of application; i.e., it allows one to generate along with the graphics sequence, segments containing title, credits to those who performed the work, text to describe the graphics, and acknowledgement of funding agency. The current version is designed to generate 3D plots and allows one to select type of display (linear or semi-log scales), choice of normalization of function values for display purposes, viewing perspective, and an option to allow continuous rotations of surfaces. This program was developed with the intention of being relatively easy to use, reasonably flexible, and requiring a minimum investment of the user's time. It uses the TV80 library of graphics software and ORDERLIB system software on the CDC 7600 at the National Magnetic Fusion Energy Computing Center at Lawrence Livermore Laboratory in California

  19. Increased natural reproduction and genetic diversity one generation after cessation of a steelhead trout (Oncorhynchus mykiss) conservation hatchery program.

    Science.gov (United States)

    Berejikian, Barry A; Van Doornik, Donald M

    2018-01-01

    Spatial and temporal fluctuations in productivity and abundance confound assessments of captive propagation programs aimed at recovery of Threatened and Endangered populations. We conducted a 17 year before-after-control-impact experiment to determine the effects of a captive rearing program for anadromous steelhead trout (Oncorhynchus mykiss) on a key indicator of natural spawner abundance (naturally produced nests or 'redds'). The supplemented population exhibited a significant (2.6-fold) increase in redd abundance in the generation following supplementation. Four non-supplemented (control) populations monitored over the same 17 year period exhibited stable or decreasing trends in redd abundance. Expected heterozygosity in the supplemented population increased significantly. Allelic richness increased, but to a lesser (non-significant) degree. Estimates of the effective number of breeders increased from a harmonic mean of 24.4 in the generation before supplementation to 38.9 after supplementation. Several non-conventional aspects of the captive rearing program may have contributed to the positive response in the natural population.

  20. Informed maintenance for next generation space transportation systems

    Science.gov (United States)

    Fox, Jack J.

    2001-02-01

    Perhaps the most substantial single obstacle to progress of space exploration and utilization of space for human benefit is the safety & reliability and the inherent cost of launching to, and returning from, space. The primary influence in the high costs of current launch systems (the same is true for commercial and military aircraft and most other reusable systems) is the operations, maintenance and infrastructure portion of the program's total life cycle costs. Reusable Launch Vehicle (RLV) maintenance and design have traditionally been two separate engineering disciplines with often conflicting objectives-maximizing ease of maintenance versus optimizing performance, size and cost. Testability analysis, an element of Informed Maintenance (IM), has been an ad hoc, manual effort, in which maintenance engineers attempt to identify an efficient method of troubleshooting for the given product, with little or no control over product design. Therefore, testability deficiencies in the design cannot be rectified. It is now widely recognized that IM must be engineered into the product at the design stage itself, so that an optimal compromise is achieved between system maintainability and performance. The elements of IM include testability analysis, diagnostics/prognostics, automated maintenance scheduling, automated logistics coordination, paperless documentation and data mining. IM derives its heritage from complimentary NASA science, space and aeronautic enterprises such as the on-board autonomous Remote Agent Architecture recently flown on NASA's Deep Space 1 Probe as well as commercial industries that employ quick turnaround operations. Commercial technologies and processes supporting NASA's IM initiatives include condition based maintenance technologies from Boeing's Commercial 777 Aircraft and Lockheed-Martin's F-22 Fighter, automotive computer diagnostics and autonomous controllers that enable 100,000 mile maintenance free operations, and locomotive monitoring

  1. Informed maintenance for next generation reusable launch systems

    Science.gov (United States)

    Fox, Jack J.; Gormley, Thomas J.

    2001-03-01

    Perhaps the most substantial single obstacle to progress of space exploration and utilization of space for human benefit is the safety & reliability and the inherent cost of launching to, and returning from, space. The primary influence in the high costs of current launch systems (the same is true for commercial and military aircraft and most other reusable systems) is the operations, maintenance and infrastructure portion of the program's total life cycle costs. Reusable Launch Vehicle (RLV) maintenance and design have traditionally been two separate engineering disciplines with often conflicting objectives - maximizing ease of maintenance versus optimizing performance, size and cost. Testability analysis, an element of Informed Maintenance (IM), has been an ad hoc, manual effort, in which maintenance engineers attempt to identify an efficient method of troubleshooting for the given product, with little or no control over product design. Therefore, testability deficiencies in the design cannot be rectified. It is now widely recognized that IM must be engineered into the product at the design stage itself, so that an optimal compromise is achieved between system maintainability and performance. The elements of IM include testability analysis, diagnostics/prognostics, automated maintenance scheduling, automated logistics coordination, paperless documentation and data mining. IM derives its heritage from complimentary NASA science, space and aeronautic enterprises such as the on-board autonomous Remote Agent Architecture recently flown on NASA's Deep Space 1 Probe as well as commercial industries that employ quick turnaround operations. Commercial technologies and processes supporting NASA's IM initiatives include condition based maintenance technologies from Boeing's Commercial 777 Aircraft and Lockheed-Martin's F-22 Fighter, automotive computer diagnostics and autonomous controllers that enable 100,000 mile maintenance free operations, and locomotive monitoring

  2. The marginal cost of operation: a parameter for evaluating and regulating of the generation work program

    International Nuclear Information System (INIS)

    Lima, W.M.; Mendes, L.N.F.; Almeida Gattass, E. de

    1989-01-01

    The Brazilian Generator System is predominantly hydroelectric, with some reservoirs having a pluri annual regularization, providing a large storage capacity of potential power for the system. This water storage allows the reduction of the alertly effect from the natural flow over the hydraulic resources for electric power production. Due to this structural characteristic, the main operation problem of the system refers to a strategical determination of storage energy utilization and, consequently, the thermal generation level. This paper examines the theoretical concepts referring to the survey of this operation strategies and analyses the factors for improving. These concepts are also extended for the interconnected electric subsystems case, mainly the interchange effect over the operation strategies of each subsystem. Finally, the natural flow sample influence over the marginal cost is analysed, comparing the obtained values with the historical sample and synthetical series of affluence. (C.G.C.). 7 refs, 2 figs, 5 tabs

  3. CGVIEW: A program to generate isometric and perspective views of combinatorial geometries

    Energy Technology Data Exchange (ETDEWEB)

    Burns, T.J.

    1992-07-01

    The prototype of a graphical debugger for combinatorial geometry (CG) is described. The prototype debugger consists of two parts: a FORTRAN-based view'' generator and a Microsoft Windows application for displaying the geometry. This document describes the code CGVIEW, which comprises the first part of the system. User-specified options permit the selection of an arbitrary viewpoint in space and the generation of either an isometric or perspective view. Additionally, any combination of zones, materials, or regions can be flagged as invisible to facilitate the inspection of internal details of the geometry. In the same manner, an arbitrary body can be cut away from the geometry to facilitate inspection and debugging. Examples illustrating the various options are described.

  4. CGVIEW: A program to generate isometric and perspective views of combinatorial geometries

    Energy Technology Data Exchange (ETDEWEB)

    Burns, T.J.

    1992-07-01

    The prototype of a graphical debugger for combinatorial geometry (CG) is described. The prototype debugger consists of two parts: a FORTRAN-based ``view`` generator and a Microsoft Windows application for displaying the geometry. This document describes the code CGVIEW, which comprises the first part of the system. User-specified options permit the selection of an arbitrary viewpoint in space and the generation of either an isometric or perspective view. Additionally, any combination of zones, materials, or regions can be flagged as invisible to facilitate the inspection of internal details of the geometry. In the same manner, an arbitrary body can be cut away from the geometry to facilitate inspection and debugging. Examples illustrating the various options are described.

  5. Generation of Maternal Obesity Models in Studies of Developmental Programming in Rodents.

    Science.gov (United States)

    Taylor, Paul D; Matthews, Phillippa A; Khan, Imran Y; Rees, Douglas; Itani, Nozomi; Poston, Lucilla

    2018-01-01

    Mother-child cohort studies have established that both pre-pregnancy body mass index (BMI) and gestational weight gain (GWG) are independently associated with cardio-metabolic risk factors in juvenile and adult offspring, including systolic and diastolic blood pressure. In rodent studies maternal obesity confers many facets of the metabolic syndrome including a persistent sympathy-excitatory hyperresponsiveness and hypertension acquired in the early stages of development. Insight from these animal models raises the possibility that early life exposure to the nutritional and hormonal environment of obesity in pregnancy in humans may lead to early onset of metabolic syndrome and/or essential hypertension. This chapter will address the development of rodent models of maternal overnutrition and obesity, which have proved invaluable in generating testable hypotheses for clinical translation and the development of intervention strategies to stem the swelling tide of obesity and its comorbidities predicted for future generations.

  6. Mathematical simulation of processes in horizontal steam generator and the program of calculation of its characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Titov, V.F.; Zorin, V.M.; Gorburov, V.I. [OKB Gidropress, Moscow Energy Inst. (Russian Federation)

    1995-12-31

    On the basis of mathematical models describing the processes in horizontal steam generator (SG) the code giving the possibility to calculate the hydrodynamical characteristics in any point of water volume, has been developed. The code simulates the processes in SG in the stationary (or quasi-stationary) mode or operation only. The code may be used as a next step to calculations of the SG characteristics in the non-stationary modes of operation.

  7. NASA Applied Sciences' DEVELOP Program Fosters the Next Generation of Earth Remote Sensing Scientists

    Science.gov (United States)

    Childs, Lauren M.; Brozen, Madeline W.; Gleason, Jonathan L.; Silcox, Tracey L.; Rea, Mimi; Holley, Sharon D.; Renneboog, Nathan; Underwood, Lauren W.; Ross, Kenton W.

    2009-01-01

    Satellite remote sensing technology and the science associated with the evaluation of the resulting data are constantly evolving. To meet the growing needs related to this industry, a team of personnel that understands the fundamental science as well as the scientific applications related to remote sensing is essential. Therefore, the workforce that will excel in this field requires individuals who not only have a strong academic background, but who also have practical hands-on experience with remotely sensed data, and have developed knowledge of its real-world applications. NASA's DEVELOP Program has played an integral role in fulfilling this need. DEVELOP is a NASA Science Mission Directorate Applied Sciences training and development program that extends the benefits of NASA Earth science research and technology to society.

  8. Can conditional cash transfer programs generate equality of opportunity in highly unequal societies? Evidence from Brazil

    Directory of Open Access Journals (Sweden)

    Simone Bohn

    2014-09-01

    Full Text Available This article examines whether the state, through conditional cash transfer programs (CCT, can reduce the poverty and extremely poverty in societies marred by high levels of income concentration. We focus on one of the most unequal countries in the globe, Brazil, and analyze the extent to which this country's CCT program - Bolsa Família (BF, Family Grant program - is able to improve the life chances of extremely poor beneficiaries, through the three major goals of PBF: First, to immediately end hunger; second, to create basic social rights related to healthcare and education; finally, considering also complementary policies, to integrate adults into the job market. The analysis relies on a quantitative survey with 4,000 beneficiaries and a qualitative survey comprised of in-depth interviews with 38 program's participants from all the regions of the country in 2008, it means that this study is about the five first years of the PBF. In order to answer the research questions, we ran four probit analyses related: a the determinants of the realization of prenatal care; b the determinants of food security among BF beneficiaries, c the determinants that adult BF recipients will return to school, d the determinants that a BF beneficiary will obtain a job. Important results from the study are: First, those who before their participation on PBF were at the margins have now been able to access healthcare services on a more regular basis. Thus, the women at the margins who were systematically excluded - black women, poorly educated and from the North - now, after their participation in the CCT program, have more access to prenatal care and can now count with more availability of public healthcare network. Second, before entering the Bolsa Família program, 50.3% of the participants faced severe food insecurity. This number went down to 36.8% in very five years. Men are more likely than women; non-blacks more likely than blacks; and South and Centre

  9. Multi-hundred watt radioisotope thermoelectric generator program. Annual report, 1976--1977. Final report

    International Nuclear Information System (INIS)

    1978-01-01

    During the reporting period, 1976 to 1977, development, fabrication and testing of the MHW-MJS RTGs were completed. The seven flight qualified units, six for flight and one spare, were delivered to KSC during May and June 1977. The two Voyager launches are scheduled for Aug. 20 and Sept. 1, 1977. The significant events and activities occurring on the MHW-MJS Program are summarized

  10. EVALUATION OF ALL BABIES CRY, A SECOND GENERATION UNIVERSAL ABUSIVE HEAD TRAUMA PREVENTION PROGRAM

    OpenAIRE

    Morrill, Allison C.; McElaney, Lisa; Peixotto, Betsy; VanVleet, Marcia; Sege, Robert

    2015-01-01

    Child maltreatment results in significant individual, family, and societal costs. This study assessed the efficacy of All Babies Cry (ABC), a media-based infant maltreatment prevention program, using a mixed-method, quasi-experimental staged evaluation design. ABC’s messaging, designed and tested through a series of focus groups, provides strategies for reducing parental stress and soothing infants. Participants (n = 423) were first-time parents, 70% fathers, recruited at two hospitals. The f...

  11. A comparative study of programming languages for next-generation astrodynamics systems

    Science.gov (United States)

    Eichhorn, Helge; Cano, Juan Luis; McLean, Frazer; Anderl, Reiner

    2018-03-01

    Due to the computationally intensive nature of astrodynamics tasks, astrodynamicists have relied on compiled programming languages such as Fortran for the development of astrodynamics software. Interpreted languages such as Python, on the other hand, offer higher flexibility and development speed thereby increasing the productivity of the programmer. While interpreted languages are generally slower than compiled languages, recent developments such as just-in-time (JIT) compilers or transpilers have been able to close this speed gap significantly. Another important factor for the usefulness of a programming language is its wider ecosystem which consists of the available open-source packages and development tools such as integrated development environments or debuggers. This study compares three compiled languages and three interpreted languages, which were selected based on their popularity within the scientific programming community and technical merit. The three compiled candidate languages are Fortran, C++, and Java. Python, Matlab, and Julia were selected as the interpreted candidate languages. All six languages are assessed and compared to each other based on their features, performance, and ease-of-use through the implementation of idiomatic solutions to classical astrodynamics problems. We show that compiled languages still provide the best performance for astrodynamics applications, but JIT-compiled dynamic languages have reached a competitive level of speed and offer an attractive compromise between numerical performance and programmer productivity.

  12. Multi-objective dynamic economic emission dispatch of electric power generation integrated with game theory based demand response programs

    International Nuclear Information System (INIS)

    Nwulu, Nnamdi I.; Xia, Xiaohua

    2015-01-01

    Highlights: • In this work, a game theory based DR program is integrated into the DEED problem. • Objectives are to minimize fuel and emissions costs and maximize the DR benefit. • Optimal generator output, customer load and customer incentive are determined. • Developed model is tested with two different scenarios. • Model provides superior results than independent optimization of DR or DEED. - Abstract: The dynamic economic emission dispatch (DEED) of electric power generation is a multi-objective mathematical optimization problem with two objective functions. The first objective is to minimize all the fuel costs of the generators in the power system, whilst the second objective seeks to minimize the emissions cost. Both objective functions are subject to constraints such as load demand constraint, ramp rate constraint, amongst other constraints. In this work, we integrate a game theory based demand response program into the DEED problem. The game theory based demand response program determines the optimal hourly incentive to be offered to customers who sign up for load curtailment. The game theory model has in built mechanisms to ensure that the incentive offered the customers is greater than the cost of interruption while simultaneously being beneficial to the utility. The combined DEED and game theoretic demand response model presented in this work, minimizes fuel and emissions costs and simultaneously determines the optimal incentive and load curtailment customers have to perform for maximal power system relief. The developed model is tested on two test systems with industrial customers and obtained results indicate the practical benefits of the proposed model

  13. ETOBOX, Cross-Sections Library Generated from ENDF/B for Program BOXER

    International Nuclear Information System (INIS)

    Paratte, J.M.; Grimm, P.

    1996-01-01

    1 - Description of program or function: Preparation of a cross section library for the code BOXER from a basic library in ENDF/B format. 2 - Method of solution: According to the recommendations in the ENDF/B manuals: M.K. Drake: Data formats and procedures for the ENDF cross section library, BNL 50274 (T-601) (October 1970) and ENDF 50496 (October 1979). ENDL-102. 3 - Restrictions on the complexity of the problem: Only the formats until ENDF/B-5 can be treated. ETOBOX is not adapted to ENDF/B-6. The gamma-part of ENDF/B is not treated

  14. A general-purpose computer program for studying ultrasonic beam patterns generated with acoustic lenses

    Science.gov (United States)

    Roberti, Dino; Ludwig, Reinhold; Looft, Fred J.

    1988-03-01

    A 3-D computer model of a piston radiator with lenses for focusing and defocusing is presented. To achieve high-resolution imaging, the frequency of the transmitted and received ultrasound must be as high as 10 MHz. Current ultrasonic transducers produce an extremely narrow beam at these high frequencies and thus are not appropriate for imaging schemes such as synthetic-aperture focus techniques (SAFT). Consequently, a numerical analysis program has been developed to determine field intensity patterns that are radiated from ultrasonic transducers with lenses. Lens shapes are described and the field intensities are numerically predicted and compared with experimental results.

  15. Repetition priming of motor activity mediated by a central pattern generator: the importance of extrinsic vs. intrinsic program initiators

    Science.gov (United States)

    Siniscalchi, Michael J.; Jing, Jian; Weiss, Klaudiusz R.

    2016-01-01

    Repetition priming is characterized by increased performance as a behavior is repeated. Although this phenomenon is ubiquitous, mediating mechanisms are poorly understood. We address this issue in a model system, the feeding network of Aplysia. This network generates both ingestive and egestive motor programs. Previous data suggest a chemical coding model: ingestive and egestive inputs to the feeding central pattern generator (CPG) release different modulators, which act via different second messengers to prime motor activity in different ways. The ingestive input to the CPG (neuron CBI-2) releases the peptides feeding circuit activating peptide and cerebral peptide 2, which produce an ingestive pattern of activity. The egestive input to the CPG (the esophageal nerve) releases the peptide small cardioactive peptide. This model is based on research that focused on a single aspect of motor control (radula opening). Here we ask whether repetition priming is observed if activity is triggered with a neuron within the core CPG itself and demonstrate that it is not. Moreover, previous studies demonstrated that effects of modulatory neurotransmitters that induce repetition priming persist. This suggests that it should be possible to “prime” motor programs triggered from within the CPG by first stimulating extrinsic modulatory inputs. We demonstrate that programs triggered after ingestive input activation are ingestive and programs triggered after egestive input activation are egestive. We ask where this priming occurs and demonstrate modifications within the CPG itself. This arrangement is likely to have important consequences for “task” switching, i.e., the cessation of one type of motor activity and the initiation of another. PMID:27466134

  16. Automatic Generation of Optimized and Synthesizable Hardware Implementation from High-Level Dataflow Programs

    Directory of Open Access Journals (Sweden)

    Khaled Jerbi

    2012-01-01

    Full Text Available In this paper, we introduce the Reconfigurable Video Coding (RVC standard based on the idea that video processing algorithms can be defined as a library of components that can be updated and standardized separately. MPEG RVC framework aims at providing a unified high-level specification of current MPEG coding technologies using a dataflow language called Cal Actor Language (CAL. CAL is associated with a set of tools to design dataflow applications and to generate hardware and software implementations. Before this work, the existing CAL hardware compilers did not support high-level features of the CAL. After presenting the main notions of the RVC standard, this paper introduces an automatic transformation process that analyses the non-compliant features and makes the required changes in the intermediate representation of the compiler while keeping the same behavior. Finally, the implementation results of the transformation on video and still image decoders are summarized. We show that the obtained results can largely satisfy the real time constraints for an embedded design on FPGA as we obtain a throughput of 73 FPS for MPEG 4 decoder and 34 FPS for coding and decoding process of the LAR coder using a video of CIF image size. This work resolves the main limitation of hardware generation from CAL designs.

  17. Ab initio Algorithmic Causal Deconvolution of Intertwined Programs and Networks by Generative Mechanism

    KAUST Repository

    Zenil, Hector

    2018-02-18

    To extract and learn representations leading to generative mechanisms from data, especially without making arbitrary decisions and biased assumptions, is a central challenge in most areas of scientific research particularly in connection to current major limitations of influential topics and methods of machine and deep learning as they have often lost sight of the model component. Complex data is usually produced by interacting sources with different mechanisms. Here we introduce a parameter-free model-based approach, based upon the seminal concept of Algorithmic Probability, that decomposes an observation and signal into its most likely algorithmic generative mechanisms. Our methods use a causal calculus to infer model representations. We demonstrate the method ability to distinguish interacting mechanisms and deconvolve them, regardless of whether the objects produce strings, space-time evolution diagrams, images or networks. We numerically test and evaluate our method and find that it can disentangle observations from discrete dynamic systems, random and complex networks. We think that these causal inference techniques can contribute as key pieces of information for estimations of probability distributions complementing other more statistical-oriented techniques that otherwise lack model inference capabilities.

  18. Development program for MHD power generation. Interim technical report June 1974

    International Nuclear Information System (INIS)

    1974-06-01

    A total of 33,000 kilowatt hours of accumulated operating experience has been built up on the Mark VI MHD generator experiment. A total absence of arcing during the last 68 hours indicates that this major determinant of long-duration reliability has been brought under control, and a new Avco-designed burner has been put in service which has made possible, on a routine basis, power-levels in the Mark VI of from 400 to 500 kilowatts. A metal tubular air preheater and compressor have been ordered for the purpose of reducing the hourly consumption of liquid oxidizer, thus allowing more hours of operation between refills. Testing of the high-temperature air heater has also yielded highly satisfactory results. To date, air preheat temperatures of 3000 0 F and higher have been reached in continuous cyclic operation for more than 600 hours. Alumina cored brick is the heater matrix and the mode of operation corresponds to separate firing. Air preheat temperature strongly influences the overall efficiency of an MHD plant and an efficiency of between 55-60 percent is possible with the performance obtained to date. Detailed analysis of the radiation cooling and kinetics of the MHD generator exhaust gas in the radiant section of the downstream boiler, have shown that the level of NO/sub x/ can be reduced to a fraction of the corresponding EPA standard in a furnace of reasonable size

  19. The US EPA ToxCast Program: Moving from Data Generation ...

    Science.gov (United States)

    The U.S. EPA ToxCast program is entering its tenth year. Significant learning and progress have occurred towards collection, analysis, and interpretation of the data. The library of ~1,800 chemicals has been subject to ongoing characterization (e.g., identity, purity, stability) and is unique in its scope, structural diversity, and use scenarios making it ideally suited to investigate the underlying molecular mechanisms of toxicity. The ~700 high-throughput in vitro assay endpoints cover 327 genes and 293 pathways as well as other integrated cellular processes and responses. The integrated analysis of high-throughput screening data has shown that most environmental and industrial chemicals are very non-selective in the biological targets they perturb, while a small subset of chemicals are relatively selective for specific biological targets. The selectivity of a chemical informs interpretation of the screening results while also guiding future mode-of-action or adverse outcome pathway approaches. Coupling the high-throughput in vitro assays with medium-throughput pharmacokinetic assays and reverse dosimetry allows conversion of the potency estimates to an administered dose. Comparison of the administered dose to human exposure provides a risk-based context. The lessons learned from this effort will be presented and discussed towards application to chemical safety decision making and the future of the computational toxicology program at the U.S. EPA. SOT pr

  20. Next generation safeguards initiative (NGSI) program plan for safeguards by design

    Energy Technology Data Exchange (ETDEWEB)

    Demuth, Scott F [Los Alamos National Laboratory; Budlong - Sylvester, Kory [Los Alamos National Laboratory; Lockwood, Dunbar [DOE/NA-243

    2010-01-01

    Safeguards by Design (SBD) is defined as the incorporation of safeguards features early in the design phase of a new nuclear facility in order to avoid the need to redesign the facility at a later date, or retrofit the completed facility. Not only can SBD avoid the need for redesign or retrofit, but consideration of safeguards features early in the facility design effort can provide for a more efficient and effective safeguards design. A program has been initiated by the United States Department of Energy during the past several years to develop, demonstrate and institutionalization SBD. This plan has been developed in parallel with a similar effort at the IAEA while taking into account their achievements and future plans. The United States SBD program is focused on (1) identification of best practices that satisfy existing safeguards requirements, (2) identification of advanced concepts where best practices can be improved, and (3) institutionalizing SBD by gaining its acceptance as a global norm for the design of new nuclear facilities. SBD guidance documents are being prepared as an aid to industry for their design activities, to describe the relationship between requirements, best practices, and advanced concepts. SBD 'lessons learned' studies have been conducted to help identify the existing best practices and potential areas for improvement. Finally, acceptance as a global norm is being pursued by way of international workshops, engagement with industry and the IAEA, and setting an example by way of its use in new nuclear facilities in the United States.

  1. A User’s Manual for a Computer Program to Generate Fatigue Spectrum Loading Sequences

    Science.gov (United States)

    1978-11-01

    IAJ ~ ~ 0.LJC C - tyo . .. a-w wLj- V1 Z- Z 7, . - CC .4 y r ZV)<<C -4 7r 1:, -. ) CJL.0-- - ŕ- wr Cf- QLj -4Q.- Z 4 rl) 0 "U -~ ~ 7 - I C_ r L/)~~ 2’j... SPEED , (EQUIVALENT AIRSPEED), KNOTS. A VALUE MUST BE ENTERED ONLY FOR THE SEGMENTS WITH M3 8 OR 13. 140 FATIGUE DAMAGE CALCULATION PROGRAM 16PA Page-of...I0_ 37 , ,7,3,1 ,, 1 1 17,1,3 1Z, 101 I I I I 1 38 1 1733 Ve AIRPLANE SPEED , (EQUIVALENT AIRSPEED), KNOTS. A VALUE MUST BE ENTERED ONLY FOR THE

  2. EVALUATION OF ALL BABIES CRY, A SECOND GENERATION UNIVERSAL ABUSIVE HEAD TRAUMA PREVENTION PROGRAM.

    Science.gov (United States)

    Morrill, Allison C; McElaney, Lisa; Peixotto, Betsy; VanVleet, Marcia; Sege, Robert

    2015-04-01

    Child maltreatment results in significant individual, family, and societal costs. This study assessed the efficacy of All Babies Cry (ABC) , a media-based infant maltreatment prevention program, using a mixed-method, quasi-experimental staged evaluation design. ABC's messaging, designed and tested through a series of focus groups, provides strategies for reducing parental stress and soothing infants. Participants ( n = 423) were first-time parents, 70% fathers, recruited at two hospitals. The first 211 were controls; the next 212 received ABC. Participants were interviewed 3 times: at baseline in hospital, and by telephone 5 weeks ( n = 359; 85%) and 17 weeks ( n = 326; 77%) later. Researchers measured parents' perceptions, intentions, and use of strategies to calm crying and manage caregiver stress. Outcomes were based on the Strengthening Families Model and the Theory of Planned Behavior. The intervention was well received, appears effective in improving mediators of behavior, and may change parental behavior.

  3. Analysis of programming properties and the row-column generation method for 1-norm support vector machines.

    Science.gov (United States)

    Zhang, Li; Zhou, WeiDa

    2013-12-01

    This paper deals with fast methods for training a 1-norm support vector machine (SVM). First, we define a specific class of linear programming with many sparse constraints, i.e., row-column sparse constraint linear programming (RCSC-LP). In nature, the 1-norm SVM is a sort of RCSC-LP. In order to construct subproblems for RCSC-LP and solve them, a family of row-column generation (RCG) methods is introduced. RCG methods belong to a category of decomposition techniques, and perform row and column generations in a parallel fashion. Specially, for the 1-norm SVM, the maximum size of subproblems of RCG is identical with the number of Support Vectors (SVs). We also introduce a semi-deleting rule for RCG methods and prove the convergence of RCG methods when using the semi-deleting rule. Experimental results on toy data and real-world datasets illustrate that it is efficient to use RCG to train the 1-norm SVM, especially in the case of small SVs. Copyright © 2013 Elsevier Ltd. All rights reserved.

  4. Status of next generation expendable launchers concepts within the FLPP program

    Science.gov (United States)

    Letourneur, Yann; Leleu, Frederic; Pinard, Didier; Krueger, Joerg; Balduccini, Mauro

    2010-05-01

    In the framework of the preparation of the next generation of launchers to be developed in Europe, the European Space Agency (ESA) has contracted NGL Prime and its industrial team to conduct a first slice of launch system and stage design activities and programmatic analyses for two types of launchers: A new expendable mid-term launch system relying on elements or "Building Blocks" from Ariane and Vega to be operational by 2015. A new long-term launch system called the Next Generation Launcher (NGL) to be operational by 2020-2025. The design reference missions include a 5 metric tons performance requirement into a Geostationary Transfer Orbit (GTO), to meet the European institutional need, with the increased capability to 8 metric tons into GTO by the addition of solid boosters, to meet the commercial market needs. In a first step, a series of trade-offs were conducted to select the concepts that best fit the requirements of the NGL and "Building Block" launcher options, in terms of propulsion (thrust level, engine characteristics), propellant choice (hydrogen, methane or solid propellants), launcher architecture (with or without strap-on boosters, bi or three stages architecture). In a second step, more detailed analyses were carried out in term of thermo-mechanical design, functional architecture, as well as in term of versatility capacity, i.e. the capability of the launcher to perform different missions than the reference ones. Consistently with this technical activity, a programmatic evaluation was consolidated by the industrial team. This paper details the outcomes of the activity carried out during this second step targeting at selecting one or two concepts. The paper will also give an overview and first results of the follow-on contract in which selected NGL concepts are being further investigated, in the prospect of creating a new European launcher family encompassing versions dedicated to the institutional needs and the commercial market (reference

  5. Performance and Economics of Catalytic Glow Plugs and Shields in Direct Injection Natural Gas Engines for the Next Generation Natural Gas Vehicle Program: Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Mello, J. P.; Bezaire, D.; Sriramulu, S.; Weber, R.

    2003-08-01

    Subcontractor report details work done by TIAX and Westport to test and perform cost analysis for catalytic glow plugs and shields for direct-injection natural gas engines for the Next Generation Natural Gas Vehicle Program.

  6. Operational procedure for computer program for design point characteristics of a compressed-air generator with through-flow combustor for V/STOL applications

    Science.gov (United States)

    Krebs, R. P.

    1971-01-01

    The computer program described in this report calculates the design-point characteristics of a compressed-air generator for use in V/STOL applications such as systems with a tip-turbine-driven lift fan. The program computes the dimensions and mass, as well as the thermodynamic performance of a model air generator configuration which involves a straight through-flow combustor. Physical and thermodynamic characteristics of the air generator components are also given. The program was written in FORTRAN IV language. Provision has been made so that the program will accept input values in either SI units or U.S. customary units. Each air generator design-point calculation requires about 1.5 seconds of 7094 computer time for execution.

  7. COMBINE/PC - a portable neutron spectrum and cross-section generation program

    International Nuclear Information System (INIS)

    Nigg, D.W.; Grimesey, R.A.; Curtis, R.L.

    1990-01-01

    Use of personal computers and engineering workstations for complex scientific computations has expanded rapidly in the past few years. This trend is expected to continue in the future with the introduction of increasingly sophisticated microprocessors and microcomputer systems. In response to this, an integrated system of neutronics and radiation transport software suitable for operation in an IBM personal computer (PC)-class environment has been under development at the Idaho National Engineering Laboratory (INEL) for the past 3 years. A key component of this system will be module to produce application-specific multigroup cross-section libraries that can be used in various neutron transport and diffusion theory code modules. This software module, referred to as COMBINE/PC, was recently completed at INEL and is the subject of this paper. COMBINE/PC was developed to provide an ENDF/B-based neutron cross-section generation capability of sufficient sophistication to handle a wide variety of practical fission and fusion-related applications while maintaining a compact machine-independent structure

  8. Reentry Program and Social Work Education: Training the Next Generation of Criminal Justice Social Workers.

    Science.gov (United States)

    Franke, Nancy D; Treglia, Dan; Cnaan, Ram A

    2017-01-01

    Social work plays a marginal role in opposing the trend of mass incarceration and high rates of recidivism, and social work education offers limited opportunities for students to specialize in working with people who are currently or were previously incarcerated. How to train students of social work to work against mass-incarceration is still challenging. The authors devised and implemented an in-school social service agency devoted to working with people pre and post release from a prison system. The agency is a field practicum setting where interested students study and practice reentry work. In this article, the authors describe and assess the educational merit of this in-school agency. Findings from surveys of students and alumni suggest that the program attained its educational goals of connecting classroom education to practice experience and training students for careers in the criminal justice system. The authors also discuss pending challenges. The experience of the Goldring Reentry Initiative suggests that by developing their own social work agencies, the authors may be able to heighten their students educational experience and expand their contribution to social work practice broadly.

  9. Disparity Map Generation from Illumination Variant Stereo Images Using Efficient Hierarchical Dynamic Programming

    Directory of Open Access Journals (Sweden)

    Viral H. Borisagar

    2014-01-01

    Full Text Available A novel hierarchical stereo matching algorithm is presented which gives disparity map as output from illumination variant stereo pair. Illumination difference between two stereo images can lead to undesirable output. Stereo image pair often experience illumination variations due to many factors like real and practical situation, spatially and temporally separated camera positions, environmental illumination fluctuation, and the change in the strength or position of the light sources. Window matching and dynamic programming techniques are employed for disparity map estimation. Good quality disparity map is obtained with the optimized path. Homomorphic filtering is used as a preprocessing step to lessen illumination variation between the stereo images. Anisotropic diffusion is used to refine disparity map to give high quality disparity map as a final output. The robust performance of the proposed approach is suitable for real life circumstances where there will be always illumination variation between the images. The matching is carried out in a sequence of images representing the same scene, however in different resolutions. The hierarchical approach adopted decreases the computation time of the stereo matching problem. This algorithm can be helpful in applications like robot navigation, extraction of information from aerial surveys, 3D scene reconstruction, and military and security applications. Similarity measure SAD is often sensitive to illumination variation. It produces unacceptable disparity map results for illumination variant left and right images. Experimental results show that our proposed algorithm produces quality disparity maps for both wide range of illumination variant and invariant stereo image pair.

  10. Program plan for evaluation and remediation of the generation and release of flammable gases in Hanford Site waste tanks

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, G.D. (comp.)

    1991-08-01

    This program plan describes the activities being conducted for the resolution of the flammable gas problem that is associated with 23 high-level waste tanks at the Hanford Site. The classification of the wastes in all of these tanks is not final and some wastes may not be high-level wastes. However, until the characterization and classification is complete, all the tanks are treated as if they contain high-level waste. Of the 23 tanks, Tank 241-SY-101 (referred to as Tank 101-SY) has exhibited significant episodic releases of flammable gases (hydrogen and nitrous oxide) for the past 10 years. The major near-term focus of this program is for the understanding and stabilization of this tank. An understanding of the mechanism for gas generation and the processes for the episodic release will be obtained through sampling of the tank contents, laboratory studies, and modeling of the tank behavior. Additional information will be obtained through new and upgraded instrumentation for the tank. A number of remediation, or stabilization, concepts will be evaluated for near-term (2 to 3 years) applications to Tank 101-SY. Detailed safety assessments are required for all activities that will occur in the tank (sampling, removal of equipment, and addition of new instruments). This program plan presents a discussion of each task, provides schedules for near-term activities, and gives a summary of the expected work for fiscal years 1991, 1992, and 1993. 16 refs., 7 figs., 8 tabs.

  11. Program plan for evaluation and remediation of the generation and release of flammable gases in Hanford Site waste tanks

    International Nuclear Information System (INIS)

    Johnson, G.D.

    1991-08-01

    This program plan describes the activities being conducted for the resolution of the flammable gas problem that is associated with 23 high-level waste tanks at the Hanford Site. The classification of the wastes in all of these tanks is not final and some wastes may not be high-level wastes. However, until the characterization and classification is complete, all the tanks are treated as if they contain high-level waste. Of the 23 tanks, Tank 241-SY-101 (referred to as Tank 101-SY) has exhibited significant episodic releases of flammable gases (hydrogen and nitrous oxide) for the past 10 years. The major near-term focus of this program is for the understanding and stabilization of this tank. An understanding of the mechanism for gas generation and the processes for the episodic release will be obtained through sampling of the tank contents, laboratory studies, and modeling of the tank behavior. Additional information will be obtained through new and upgraded instrumentation for the tank. A number of remediation, or stabilization, concepts will be evaluated for near-term (2 to 3 years) applications to Tank 101-SY. Detailed safety assessments are required for all activities that will occur in the tank (sampling, removal of equipment, and addition of new instruments). This program plan presents a discussion of each task, provides schedules for near-term activities, and gives a summary of the expected work for fiscal years 1991, 1992, and 1993. 16 refs., 7 figs., 8 tabs

  12. Low Cost High Performance Generator Technology Program. Volume 4. Mission application study

    International Nuclear Information System (INIS)

    1975-07-01

    Results of initial efforts to investigate application of selenide thermoelectric RTG's to specific missions as well as an indication of development requirements to enable satisfaction of emerging RTG performance criteria are presented. Potential mission applications in DoD such as SURVSATCOM, Advance Defense Support Program, Laser Communication Satellite, Satellite Data System, Global Positioning Satellite, Deep Space Surveillance Satellite, and Unmanned Free Swimming Submersible illustrate power requirements in the range of 500 to 1000 W. In contrast, the NASA applications require lower power ranging from 50 W for outer planetary atmospheric probes to about 200 W for spacecraft flights to Jupiter and other outer planets. The launch dates for most of these prospective missions is circa 1980, a requirement roughly compatible with selenide thermoelectric and heat source technology development. A discussion of safety criteria is included to give emphasis to the requirements for heat source design. In addition, the observation is made that the potential accident environments of all launch vehicles are similar so that a reasonable composite set of design specifications may be derived to satisfy almost all applications. Details of the LCHPG application potential is afforded by three designs: an 80 W RTG using improved selenide thermoelectric material, a 55 to 65 W LCHPG using current and improved selenide materials, and the final 500 W LCHPG as reported in Volume 2. The final results of the LCHPG design study have shown that in general, all missions can expect an LCHPG design which yields 10 percent efficiency at 3 W/lb with the current standard selenide thermoelectric materials, with growth potential to 14 percent at greater than 4 W/lb in the mid 1980's time frame

  13. Low Cost High Performance Generator Technology Program. Volume 4. Mission application study

    Energy Technology Data Exchange (ETDEWEB)

    1975-07-01

    Results of initial efforts to investigate application of selenide thermoelectric RTG's to specific missions as well as an indication of development requirements to enable satisfaction of emerging RTG performance criteria are presented. Potential mission applications in DoD such as SURVSATCOM, Advance Defense Support Program, Laser Communication Satellite, Satellite Data System, Global Positioning Satellite, Deep Space Surveillance Satellite, and Unmanned Free Swimming Submersible illustrate power requirements in the range of 500 to 1000 W. In contrast, the NASA applications require lower power ranging from 50 W for outer planetary atmospheric probes to about 200 W for spacecraft flights to Jupiter and other outer planets. The launch dates for most of these prospective missions is circa 1980, a requirement roughly compatible with selenide thermoelectric and heat source technology development. A discussion of safety criteria is included to give emphasis to the requirements for heat source design. In addition, the observation is made that the potential accident environments of all launch vehicles are similar so that a reasonable composite set of design specifications may be derived to satisfy almost all applications. Details of the LCHPG application potential is afforded by three designs: an 80 W RTG using improved selenide thermoelectric material, a 55 to 65 W LCHPG using current and improved selenide materials, and the final 500 W LCHPG as reported in Volume 2. The final results of the LCHPG design study have shown that in general, all missions can expect an LCHPG design which yields 10 percent efficiency at 3 W/lb with the current standard selenide thermoelectric materials, with growth potential to 14 percent at greater than 4 W/lb in the mid 1980's time frame.

  14. Artificial intelligence used for the interpretation of combined spectral data *1 : Part II. PEGASUS: a PROLOG program for the generation of acyclic molecular structures

    NARCIS (Netherlands)

    Kleywegt, G.J.; Luinge, H.J.; Klooster, H.A. van 't

    1987-01-01

    A computer program, PEGASUS (PROLOG-based EXSPEC Generator for Acyclic StrUctureS), has been developed which can be used to generate exhaustively and non-redundantly all possible acyclic isomers that satisfy a given molecular weight or formula PEGASUS was written in PROLOG and implemented on an

  15. Design of gate stacks for improved program/erase speed, retention and process margin aiming next generation metal nanocrystal memories

    International Nuclear Information System (INIS)

    Jang, Jaeman; Choi, Changmin; Min, Kyeong-Sik; Kim, Dong Myong; Kim, Dae Hwan; Lee, Jang-Sik; Lee, Jaegab

    2009-01-01

    In this work, gate stacks in metal nanocrystal (NC) memories, as promising next generation storage devices and their systems, are extensively investigated. A comparative analysis and characterization of the program/erase (P/E) speed, retention and the process margin of cobalt NC memories including high-k and bandgap engineering technologies are performed by using the technology computer-aided design (TCAD) simulation. It is shown that NC memory with high-k dielectric (HfO 2 ) has better performance in P/E speed and retention when the diameter of NC is below 5 nm. When the diameter is beyond 5 nm, on the other hand, the bandgap-engineered bottom oxide gate structure shows improved performance in P/E speed and retention. From the process margin perspective, as the permittivity of the dielectric gets larger, the limits of the diameter and the density of NCs allow the degree of freedom to become larger

  16. Determining the Optimal Solution for Quadratically Constrained Quadratic Programming (QCQP) on Energy-Saving Generation Dispatch Problem

    Science.gov (United States)

    Lesmana, E.; Chaerani, D.; Khansa, H. N.

    2018-03-01

    Energy-Saving Generation Dispatch (ESGD) is a scheme made by Chinese Government in attempt to minimize CO2 emission produced by power plant. This scheme is made related to global warming which is primarily caused by too much CO2 in earth’s atmosphere, and while the need of electricity is something absolute, the power plants producing it are mostly thermal-power plant which produced many CO2. Many approach to fulfill this scheme has been made, one of them came through Minimum Cost Flow in which resulted in a Quadratically Constrained Quadratic Programming (QCQP) form. In this paper, ESGD problem with Minimum Cost Flow in QCQP form will be solved using Lagrange’s Multiplier Method

  17. Converted and upgraded maps programmed in the newer speech processor for the first generation of multichannel cochlear implant.

    Science.gov (United States)

    Magalhães, Ana Tereza de Matos; Goffi-Gomez, M Valéria Schmidt; Hoshino, Ana Cristina; Tsuji, Robinson Koji; Bento, Ricardo Ferreira; Brito, Rubens

    2013-09-01

    To identify the technological contributions of the newer version of speech processor to the first generation of multichannel cochlear implant and the satisfaction of users of the new technology. Among the new features available, we focused on the effect of the frequency allocation table, the T-SPL and C-SPL, and the preprocessing gain adjustments (adaptive dynamic range optimization). Prospective exploratory study. Cochlear implant center at hospital. Cochlear implant users of the Spectra processor with speech recognition in closed set. Seventeen patients were selected between the ages of 15 and 82 and deployed for more than 8 years. The technology update of the speech processor for the Nucleus 22. To determine Freedom's contribution, thresholds and speech perception tests were performed with the last map used with the Spectra and the maps created for Freedom. To identify the effect of the frequency allocation table, both upgraded and converted maps were programmed. One map was programmed with 25 dB T-SPL and 65 dB C-SPL and the other map with adaptive dynamic range optimization. To assess satisfaction, SADL and APHAB were used. All speech perception tests and all sound field thresholds were statistically better with the new speech processor; 64.7% of patients preferred maintaining the same frequency table that was suggested for the older processor. The sound field threshold was statistically significant at 500, 1,000, 1,500, and 2,000 Hz with 25 dB T-SPL/65 dB C-SPL. Regarding patient's satisfaction, there was a statistically significant improvement, only in the subscale of speech in noise abilities and phone use. The new technology improved the performance of patients with the first generation of multichannel cochlear implant.

  18. Optimal Bidding Strategy of Generation Companies (GenCos in Energy and Spinning Reserve Markets Using Linear Programming

    Directory of Open Access Journals (Sweden)

    Hassan Barati

    2011-10-01

    Full Text Available In this paper a new bidding strategy become modeling to day-ahead markets. The proposed algorithm is related to the point of view of a generation company (Genco that its end is maximized its benefit as a participant in sale markets of active power and spinning reserve. In this method, hourly forecasted energy price (FEP and forecasted reserve price (FRP is used as a reference to model the possible and probable price strategies of Gencos. A bi-level optimization problem That first level, is used to maximize the individual Genco’s payoffs for obtaining the optimal offered quantity of Gencos. The second one, uses the results of the upper sub-problem and minimizes the consumer’s payment with regard to the technical and network constraints, which leads to the awarded generation of the Gencos. In this paper use of the game theory in exist optimization model. The paper proposes a linear programming approach. A six bus system is employed to illustrate the application of the proposed method and to show its high precision and capabilities.

  19. Expanding the generation and use of economic and financial data to improve HIV program planning and efficiency: a global perspective.

    Science.gov (United States)

    Holmes, Charles B; Atun, Rifat; Avila, Carlos; Blandford, John M

    2011-08-01

    Cost information is needed at multiple levels of health care systems to inform the public health response to HIV. To date, most attention has been paid to identifying the cost drivers of providing antiretroviral treatment, and these data have driven interventions that have been successful in reducing drug and human resource costs. The need for further cost information, especially for less well-studied areas such as HIV prevention, is particularly acute given global budget constraints and ongoing efforts to extract the greatest possible value from money spent on the response. Cost information can be collected from multiple perspectives and levels of the health care system (site, program, and national levels), and it is critical to choose the appropriate methodology in order to generate the appropriate information for decision-making. Organizations such as United States President's Emergency Plan for AIDS Relief, the Global Fund to Fight AIDS, Tuberculosis, and Malaria, and other organizations are working together to bridge the divide between the fields of economics and HIV program implementation by accelerating the collection of cost data and building further local demand and capacity for their use.

  20. The South Carolina Amazing Coast Program: Using Ocean Sciences to Address Next Generation Science Standards in Grades 3-5

    Science.gov (United States)

    Bell, E. V.; Thomas, C.; Weiss, B.; Bliss, A.; Spence, L.

    2013-12-01

    The Next Generation Science Standards (NGSS) are more inclusive of ocean sciences than the National Science Standards and respective state science standards. In response, the Center for Ocean Sciences Education Excellence-SouthEast (COSEE SE) is piloting the South Carolina's Amazing Coast (SCAC) program: a three-year initiative that incorporates ocean science concepts in grades 3-5 with the goals of addressing NGSS, STEM (science-technology-engineering-math) disciplines, and inquiry skills. The SCAC program targeted two Charleston County, South Carolina elementary schools that were demographically similar: Title 1 status (75% free or reduced lunch), > 90% African American student population, grade level size inquiry skills. Specifically, third grade students learn about coastal habitats, animal and plant adaptations, and human impacts to the environment, and engage in a salt marsh restoration capstone project. This part of the curriculum aligns with the NGSS Core Ideas 3-LS1, 3-LS3, 3-LS4, 3-ESS3. The fourth grade students learn about weather, organism responses to the environment, and engage in a weather buoy construction capstone project. This part of the curriculum aligns with the NGSSS Core Ideas 4-LS1, 4-ESS2, 4-ESS3, 3-5-ETS1. In 5th grade, students focus specifically on the ocean ecosystem, human impacts on the environment and engage in a capstone project of designing and constructing remotely operated vehicles. This part of the curriculum aligns with NGSS Core Ideas 5-PS2, 5-LS1, 5-LS2, 5-ESS2, 3-5-ETS1. Initial evaluation results indicate that the SCAC teachers value the coach mentor approach for teacher professional development as well as the impact of field based experiences, place-based learning, and a culminating capstone project on student learning. Teacher feedback also indicates elements of sustainability that extend beyond the scope of the pilot project.These initial evaluation results poise the SCAC curriculum to be replicated in other

  1. EXONSAMPLER: a computer program for genome-wide and candidate gene exon sampling for targeted next-generation sequencing.

    Science.gov (United States)

    Cosart, Ted; Beja-Pereira, Albano; Luikart, Gordon

    2014-11-01

    The computer program EXONSAMPLER automates the sampling of thousands of exon sequences from publicly available reference genome sequences and gene annotation databases. It was designed to provide exon sequences for the efficient, next-generation gene sequencing method called exon capture. The exon sequences can be sampled by a list of gene name abbreviations (e.g. IFNG, TLR1), or by sampling exons from genes spaced evenly across chromosomes. It provides a list of genomic coordinates (a bed file), as well as a set of sequences in fasta format. User-adjustable parameters for collecting exon sequences include a minimum and maximum acceptable exon length, maximum number of exonic base pairs (bp) to sample per gene, and maximum total bp for the entire collection. It allows for partial sampling of very large exons. It can preferentially sample upstream (5 prime) exons, downstream (3 prime) exons, both external exons, or all internal exons. It is written in the Python programming language using its free libraries. We describe the use of EXONSAMPLER to collect exon sequences from the domestic cow (Bos taurus) genome for the design of an exon-capture microarray to sequence exons from related species, including the zebu cow and wild bison. We collected ~10% of the exome (~3 million bp), including 155 candidate genes, and ~16,000 exons evenly spaced genomewide. We prioritized the collection of 5 prime exons to facilitate discovery and genotyping of SNPs near upstream gene regulatory DNA sequences, which control gene expression and are often under natural selection. © 2014 John Wiley & Sons Ltd.

  2. COMBINE7.1 - A Portable ENDF/B-VII.0 Based Neutron Spectrum and Cross-Section Generation Program

    Energy Technology Data Exchange (ETDEWEB)

    Woo Y. Yoon; David W. Nigg

    2009-08-01

    -ordinate transport code, is incoprated into COMBINE7.1. As an option, the 167 fine-group constants generated by COMBINE portion in the program can be used to cacluate regionwise spectra in the ANISN portion, all internally to reflect the one-dimensional transport correction. Results for the criticality validation calculations are included as a part of verification and validation.

  3. COMBINE7.0 - A Portable ENDF/B-VII.0 Based Neutron Spectrum and Cross-Section Generation Program

    Energy Technology Data Exchange (ETDEWEB)

    Woo Y. Yoon; David W. Nigg

    2008-09-01

    -ordinate transport code, is incoprated into COMBINE7.0. As an option, the 167 fine-group constants generated by COMBINE portion in the program can be used to cacluate regionwise spectra in the ANISN portion, all internally to reflect the one-dimensional transport correction. Results for the criticality validation calculations are included as a part of verification and validation.

  4. COMBINE7.1 - A Portable ENDF/B-VII.0 Based Neutron Spectrum and Cross-Section Generation Program

    Energy Technology Data Exchange (ETDEWEB)

    Woo Y. Yoon; David W. Nigg

    2011-09-01

    COMBINE7.1 is a FORTRAN 90 computer code that generates multigroup neutron constants for use in the deterministic diffusion and transport theory neutronics analysis. The cross-section database used by COMBINE7.1 is derived from the Evaluated Nuclear Data Files (ENDF/B-VII.0). The neutron energy range covered is from 20 MeV to 1.0E-5 eV. The Los Alamos National Laboratory NJOY code is used as the processing code to generate a 167 fine-group cross-section library in MATXS format for Bondarenko self-shielding treatment. Resolved resonance parameters are extracted from ENDF/B-VII.0 File 2 for a separate library to be used in an alternate Nordheim self-shielding treatment in the resolved resonance energy range. The equations solved for energy dependent neutron spectrum in the 167 fine-group structure are the B3 or B1 zero-dimensional approximations to the transport equation. The fine group cross sections needed for the spectrum calculation are first prepared by Bondarenko self-shielding interpolation in terms of background cross section and temperature. The geometric lump effect, when present, is accounted for by augmenting the background cross section. Nordheim self-shielded fine group cross sections for a material having resolved resonance parameters overwrite correspondingly the existing self-shielded fine group cross sections when this option is used. COMBINE7.1 coalesces fine group cross sections into broad group macroscopic and microscopic constants. The coalescing is performed by utilizing fine-group fluxes and/or currents obtained by spectrum calculation as the weighting functions. The multigroup constants may be output in any of several standard formats including INL format, ANISN 14** free format, CCCC ISOTXS format, and AMPX working library format. ANISN-PC, a one-dimensional (1-D) discrete-ordinate transport code, is incorporated into COMBINE7.1. As an option, the 167 fine-group constants generated by zero-dimensional COMBINE portion in the program can be

  5. Educational Software for the Teaching and Learning of Quadrilaterals Generated from a Programming Language and the Dabeja Method (Invited Paper

    Directory of Open Access Journals (Sweden)

    Daniel Bejarano Segura

    2016-06-01

    Full Text Available The teaching of math is a process that starts from an early age especially the teaching of geometry through which different representations, constructions, axioms, and theorems among others helps develop the formal thoughts of individuals. This requires not only graphical but demonstrative processes that mentally schemes chords to generate levels of rational thought. Quadrilaterals are part of the components of geometry in the two-dimensional and three-dimensional fields. They possess properties, definitions, classifications, and studies through postulations of parallelism and perpendicularity. Using dynamic strategies and formal processes of knowledge as the Dabeja method to strengthen the teaching of geometry of quadrilaterals through the construction of dynamic courseware, is one of the questions that reveals problems in thought formation. This is an investigation of a parametric quantitative approach with an experimental design of research aimed at the techno de facto and their relationship with the individual development of a formal thinking. An educational software was developed using the Java programming language to construct quadrilaterals, demonstrate their properties and relationships through the Dabeja method.

  6. Learning a New World: Reflections on Being a First-Generation College Student and the Influence of TRIO Programs

    Science.gov (United States)

    Graham, LaKresha

    2011-01-01

    TRIO programs exist for students who need guidance through the academic systems that exist. TRIO programs began in 1964, when Lyndon Johnson signed the Educational Opportunity Act into law (McElroy and Armesto, 1998). This started the TRIO programs to help disadvantaged students enroll and complete college. TRIO programs, including Talent Search…

  7. Second Generation Reusable Launch Vehicle Development and Global Competitiveness of US Space Transportation Industry: Critical Success Factors Assessment

    Science.gov (United States)

    Enyinda, Chris I.

    2002-01-01

    In response to the unrelenting call in both public and private sectors fora to reduce the high cost associated with space transportation, many innovative partially or fully RLV (Reusable Launch Vehicles) designs (X-34-37) were initiated. This call is directed at all levels of space missions including scientific, military, and commercial and all aspects of the missions such as nonrecurring development, manufacture, launch, and operations. According to Wertz, tbr over thirty years, the cost of space access has remained exceedingly high. The consensus in the popular press is that to decrease the current astronomical cost of access to space, more safer, reliable, and economically viable second generation RLVs (SGRLV) must be developed. Countries such as Brazil, India, Japan, and Israel are now gearing up to enter the global launch market with their own commercial space launch vehicles. NASA and the US space launch industry cannot afford to lag behind. Developing SGRLVs will immeasurably improve the US's space transportation capabilities by helping the US to regain the global commercial space markets while supporting the transportation capabilities of NASA's space missions, Developing the SGRLVs will provide affordable commercial space transportation that will assure the competitiveness of the US commercial space transportation industry in the 21st century. Commercial space launch systems are having difficulty obtaining financing because of the high cost and risk involved. Access to key financial markets is necessary for commercial space ventures. However, public sector programs in the form of tax incentives and credits, as well as loan guarantees are not yet available. The purpose of this paper is to stimulate discussion and assess the critical success factors germane for RLVs development and US global competitiveness.

  8. Computer program MCAP-TOSS calculates steady-state fluid dynamics of coolant in parallel channels and temperature distribution in surrounding heat-generating solid

    Science.gov (United States)

    Lee, A. Y.

    1967-01-01

    Computer program calculates the steady state fluid distribution, temperature rise, and pressure drop of a coolant, the material temperature distribution of a heat generating solid, and the heat flux distributions at the fluid-solid interfaces. It performs the necessary iterations automatically within the computer, in one machine run.

  9. Mother's Education and Children's Outcomes: How Dual-Generation Programs Offer Increased Opportunities for America's Families. Disparities among America's Children. No. 2

    Science.gov (United States)

    Hernandez, Donald J.; Napierala, Jeffrey S.

    2014-01-01

    Policies and programs aimed at increasing educational and economic opportunities typically target either low-income children or their mothers, but not both, which limits their impact in fostering intergenerational mobility. This insight undergirds the development and implementation of dual-generation strategies, which focus simultaneously on both…

  10. Generative Semantics

    Science.gov (United States)

    Bagha, Karim Nazari

    2011-01-01

    Generative semantics is (or perhaps was) a research program within linguistics, initiated by the work of George Lakoff, John R. Ross, Paul Postal and later McCawley. The approach developed out of transformational generative grammar in the mid 1960s, but stood largely in opposition to work by Noam Chomsky and his students. The nature and genesis of…

  11. Generating information-rich high-throughput experimental materials genomes using functional clustering via multitree genetic programming and information theory.

    Science.gov (United States)

    Suram, Santosh K; Haber, Joel A; Jin, Jian; Gregoire, John M

    2015-04-13

    High-throughput experimental methodologies are capable of synthesizing, screening and characterizing vast arrays of combinatorial material libraries at a very rapid rate. These methodologies strategically employ tiered screening wherein the number of compositions screened decreases as the complexity, and very often the scientific information obtained from a screening experiment, increases. The algorithm used for down-selection of samples from higher throughput screening experiment to a lower throughput screening experiment is vital in achieving information-rich experimental materials genomes. The fundamental science of material discovery lies in the establishment of composition-structure-property relationships, motivating the development of advanced down-selection algorithms which consider the information value of the selected compositions, as opposed to simply selecting the best performing compositions from a high throughput experiment. Identification of property fields (composition regions with distinct composition-property relationships) in high throughput data enables down-selection algorithms to employ advanced selection strategies, such as the selection of representative compositions from each field or selection of compositions that span the composition space of the highest performing field. Such strategies would greatly enhance the generation of data-driven discoveries. We introduce an informatics-based clustering of composition-property functional relationships using a combination of information theory and multitree genetic programming concepts for identification of property fields in a composition library. We demonstrate our approach using a complex synthetic composition-property map for a 5 at. % step ternary library consisting of four distinct property fields and finally explore the application of this methodology for capturing relationships between composition and catalytic activity for the oxygen evolution reaction for 5429 catalyst compositions in a

  12. Multi-hundred watt radioisotope thermoelectric generator program. Annual report, 1 January 1974--31 December 1974

    International Nuclear Information System (INIS)

    1974-01-01

    Significant events, activities and achievements on the MHW-RTG program during the calendar year Jan. 1 to Dec. 31, 1974 are summarized. It is primarily concerned with work performed for the Atomic Energy Commission (now Energy Research and Development Administration) on Lincoln Laboratory's LES 8/9 Program, but includes some of the effort on the Jet Propulsion Laboratory's Mariner-Jupiter Saturn Program, because much of the work is applicable to both programs

  13. When Old Habits Train a New Generation: Findings From a National Survey of Internal Medicine Program Directors on Procedural Training.

    Science.gov (United States)

    Ricotta, Daniel N; Smith, C Christopher; McSparron, Jakob I; Chaudhry, Saima I; McDonald, Furman S; Huang, Grace C

    2017-11-01

    Resident physicians routinely perform bedside procedures that pose substantial risk to patients. However, no standard programmatic approach to supervision and procedural competency assessment among residents currently exists. The authors performed a national survey of internal medicine (IM) program directors to examine procedural assessment and supervision practices of IM residency programs. Procedures chosen were those commonly performed by medicine residents at the bedside. Of the 368 IM programs, 226 (61%) completed the survey. Programs reported the predominant method of training as 171 (74%) apprenticeship and 106 (46%) as module based. The majority of programs used direct observation to attest to competence, with 55% to 62% relying on credentialed residents. Most programs also relied on a minimum number of procedures to determine competence (64%-88%), 72% of which reported 5 procedures (a lapsed historical standard). This national survey demonstrates that procedural assessment practices for IM residents are insufficiently robust and may put patients at undue risk.

  14. KOMBIP - a computer program for generation of Lorentzian/Gaussian line-shape and 'stick'-plot NMR spectra

    International Nuclear Information System (INIS)

    Aksnes, D.W.

    1971-01-01

    The program was written in order to obtain Lorentzian/Gaussian line-shape spectra and 'stick'-plots from a given set of transition frequencies and corresponding intensities using the CALCOMP graph-plotter. KOMBIP can be used either as a separate program or as a subroutine in connection with, for instance, the NMR computer programs LAOCOON II, LAOCN3, UEANMR II, UEAITR, LACX, and NMR IT. (Auth.)

  15. AQMAN; linear and quadratic programming matrix generator using two-dimensional ground-water flow simulation for aquifer management modeling

    Science.gov (United States)

    Lefkoff, L.J.; Gorelick, S.M.

    1987-01-01

    A FORTRAN-77 computer program code that helps solve a variety of aquifer management problems involving the control of groundwater hydraulics. It is intended for use with any standard mathematical programming package that uses Mathematical Programming System input format. The computer program creates the input files to be used by the optimization program. These files contain all the hydrologic information and management objectives needed to solve the management problem. Used in conjunction with a mathematical programming code, the computer program identifies the pumping or recharge strategy that achieves a user 's management objective while maintaining groundwater hydraulic conditions within desired limits. The objective may be linear or quadratic, and may involve the minimization of pumping and recharge rates or of variable pumping costs. The problem may contain constraints on groundwater heads, gradients, and velocities for a complex, transient hydrologic system. Linear superposition of solutions to the transient, two-dimensional groundwater flow equation is used by the computer program in conjunction with the response matrix optimization method. A unit stress is applied at each decision well and transient responses at all control locations are computed using a modified version of the U.S. Geological Survey two dimensional aquifer simulation model. The program also computes discounted cost coefficients for the objective function and accounts for transient aquifer conditions. (Author 's abstract)

  16. The collaborative African genomics network training program: a trainee perspective on training the next generation of African scientists.

    Science.gov (United States)

    Mlotshwa, Busisiwe C; Mwesigwa, Savannah; Mboowa, Gerald; Williams, Lesedi; Retshabile, Gaone; Kekitiinwa, Adeodata; Wayengera, Misaki; Kyobe, Samuel; Brown, Chester W; Hanchard, Neil A; Mardon, Graeme; Joloba, Moses; Anabwani, Gabriel; Mpoloka, Sununguko W

    2017-07-01

    The Collaborative African Genomics Network (CAfGEN) aims to establish sustainable genomics research programs in Botswana and Uganda through long-term training of PhD students from these countries at Baylor College of Medicine. Here, we present an overview of the CAfGEN PhD training program alongside trainees' perspectives on their involvement. Historically, collaborations between high-income countries (HICs) and low- and middle-income countries (LMICs), or North-South collaborations, have been criticized for the lack of a mutually beneficial distribution of resources and research findings, often undermining LMICs. CAfGEN plans to address this imbalance in the genomics field through a program of technology and expertise transfer to the participating LMICs. An overview of the training program is presented. Trainees from the CAfGEN project summarized their experiences, looking specifically at the training model, benefits of the program, challenges encountered relating to the cultural transition, and program outcomes after the first 2 years. Collaborative training programs like CAfGEN will not only help establish sustainable long-term research initiatives in LMICs but also foster stronger North-South and South-South networks. The CAfGEN model offers a framework for the development of training programs aimed at genomics education for those for whom genomics is not their "first language." Genet Med advance online publication 06 April 2017.

  17. Effects of Intelligent Computer-Generated Interactive Mathematics Programs on Students' Achievement and Affective Domain

    Science.gov (United States)

    Wendel, Holly Marie

    2016-01-01

    The purpose of this study was to determine the relationship each of the mathematics web-based programs, MyMathLab and Assessments and Learning in Knowledge Spaces (ALEKS), has with students' mathematics achievement. In addition, the study examined the relationship between students' affective domain and the type of program as well as student…

  18. Training the Next Generation of Teaching Professors: A Comparative Study of Ph.D. Programs in Political Science

    Science.gov (United States)

    Ishiyama, John; Miles, Tom; Balarezo, Christine

    2010-01-01

    In this article, we investigate the graduate curricula of political science programs and 122 Ph.D.-granting political science programs in the United States and how they seek to prepare political science teachers. We first investigate whether the department offers a dedicated political science course at the graduate level on college teaching, and…

  19. The collaborative African genomics network training program: A trainee perspective on training the next generation of African scientists

    Science.gov (United States)

    The Collaborative African Genomics Network (CAfGEN) aims to establish sustainable genomics research programs in Botswana and Uganda through long-term training of PhD students from these countries at Baylor College of Medicine. Here, we present an overview of the CAfGEN PhD training program alongside...

  20. Alliance for NanoHealth (ANH) Training Program for the development of future generations of interdisciplinary scientists and collaborative research focused upon the advancement of nanomedicine

    Energy Technology Data Exchange (ETDEWEB)

    Gorenstein, David [Univ. of Texas Health Science Center, Houston, TX (United States)

    2013-12-23

    The objectives of this program are to promote the mission of the Department of Energy (DOE) Science, Technology, Engineering, Math (STEM) Program by recruiting students to science and engineering disciplines with the intent of mentoring and supporting the next generation of scientists; to foster interdisciplinary and collaborative research under the sponsorship of ANH for the discovery and design of nano-based materials and devices with novel structures, functions, and properties; and to prepare a diverse work force of scientists, engineers, and clinicians by utilizing the unique intellectual and physical resources to develop novel nanotechnology paradigms for clinical application.

  1. Contrasting gene expression programs correspond with predator-induced phenotypic plasticity within and across generations in Daphnia.

    Science.gov (United States)

    Hales, Nicole R; Schield, Drew R; Andrew, Audra L; Card, Daren C; Walsh, Matthew R; Castoe, Todd A

    2017-10-01

    Research has shown that a change in environmental conditions can alter the expression of traits during development (i.e., "within-generation phenotypic plasticity") as well as induce heritable phenotypic responses that persist for multiple generations (i.e., "transgenerational plasticity", TGP). It has long been assumed that shifts in gene expression are tightly linked to observed trait responses at the phenotypic level. Yet, the manner in which organisms couple within- and TGP at the molecular level is unclear. Here we tested the influence of fish predator chemical cues on patterns of gene expression within- and across generations using a clone of Daphnia ambigua that is known to exhibit strong TGP but weak within-generation plasticity. Daphnia were reared in the presence of predator cues in generation 1, and shifts in gene expression were tracked across two additional asexual experimental generations that lacked exposure to predator cues. Initial exposure to predator cues in generation 1 was linked to ~50 responsive genes, but such shifts were 3-4× larger in later generations. Differentially expressed genes included those involved in reproduction, exoskeleton structure and digestion; major shifts in expression of genes encoding ribosomal proteins were also identified. Furthermore, shifts within the first-generation and transgenerational shifts in gene expression were largely distinct in terms of the genes that were differentially expressed. Such results argue that the gene expression programmes involved in within- vs. transgeneration plasticity are fundamentally different. Our study provides new key insights into the plasticity of gene expression and how it relates to phenotypic plasticity in nature. © 2017 John Wiley & Sons Ltd.

  2. Report on achievements in fiscal 1998. Development of technologies to put photovoltaic power generation systems into practical use (International cooperation project - collection of information on IEA photovoltaic power generation program); 1998 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Kokusai kyoryoku jigyo (IEA taiyoko hatsuden program ni kansuru joho shushu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Research and development, verification, analysis and information exchange have been performed based on the 'Treaty to Execute the Research and Cooperation Program on Photovoltaic Power Generation System'. The IEA/REWP/PVPS activities in fiscal 1999 include the participation to the two executive committee meetings (Valencia and Sydney), and the subcommittee activities. The subcommittee activities are as follows: Task I: information exchange on and proliferation of the photovoltaic power generation systems, Task II: operation performance and design of the photovoltaic power generation systems, Task III: design and operation of the independent type and the island use power plants, Task VII: Building integrated photovoltaic power generation systems, Task VI, Sub-task 5: investigations and researches on possibility for photovoltaic power generation systems utilizing unutilized lands including deserts, and Task IX: technical cooperation to expand photovoltaic power generation system markets. (NEDO)

  3. Seismic Safety Margins Research Programs. Assessment of potential increases in risk due to degradation of steam generator and reactor coolant pump supports. [PWR

    Energy Technology Data Exchange (ETDEWEB)

    Bohn, M. P.; Wells, J. E.; Shieh, L. C.; Cover, L. E.; Streit, R. L.

    1983-08-01

    During the NRC licensing review for the North Anna Units 1 and 2 pressurized-water reactors (PWRs), questions were raised regarding the potential for low-fracture toughness of steam-generator and reactor-coolant-pump supports. Because other PWRs may face similar problems, this issue was incorporated into the NRC Program for Resolution of Generic Issues. The work described in this report was performed to provide the NRC with a quantitative evaluation of the value/impact implications of the various options of resolving the fracture-toughness question. This report presents an assessment of the probabilistic risk associated with nil-ductility failures of steam-generator and reactor-coolant-pump structural-support systems during seismic events, performed using the Seismic Safety Margins Research Program codes and data bases.

  4. Program and curriculum development in radiochemistry at Washington State University to educate the next generation of radiochemists in the US

    International Nuclear Information System (INIS)

    Clark, S.B.; Nash, K.; Benny, P.; Elliston, J.; Buckely, P.

    2005-01-01

    Washington State University (WSU) has -been the recipient of grant funds from the U.S. Department of Energy's Office of Nuclear Science and Technology to enhance its curriculum and service activities in radiochemistry. These funds have been used to hire new faculty, redesign undergraduate and graduate courses in radiochemistry, and initiate summer programs in radiochemistry for regional college faculty and high school teachers. The funds received from the federal government were matched by investments from the state of Washington. These investments have resulted in many positive changes in the Chemistry Department and the Nuclear Radiation Center at WSU. The number of students graduating from our radiochemistry programs has increased markedly, and the level of additional extra mural funding for our programs has also increased. These activities will be described, and feedback from employers of our radiochemistry graduates will be provided. Plans for future radiochemistry program development will also be discussed.

  5. Generation Psy: Student characteristics and academic achievement in a three-year problem-based learning bachelor program

    NARCIS (Netherlands)

    de Koning, B.B.; Loyens, S.M.M; Smeets, G.; Rikers, R.M.J.P.; van der Molen, H.T.

    2012-01-01

    This study investigated the simultaneous impact of demographic, personality, intelligence, and (prior) study performance factors on students' academic achievement in a three-year academic problem-based psychology program. Information regarding students' gender, age, nationality, pre-university

  6. Programming

    International Nuclear Information System (INIS)

    Jackson, M.A.

    1982-01-01

    The programmer's task is often taken to be the construction of algorithms, expressed in hierarchical structures of procedures: this view underlies the majority of traditional programming languages, such as Fortran. A different view is appropriate to a wide class of problem, perhaps including some problems in High Energy Physics. The programmer's task is regarded as having three main stages: first, an explicit model is constructed of the reality with which the program is concerned; second, this model is elaborated to produce the required program outputs; third, the resulting program is transformed to run efficiently in the execution environment. The first two stages deal in network structures of sequential processes; only the third is concerned with procedure hierarchies. (orig.)

  7. Programming

    CERN Document Server

    Jackson, M A

    1982-01-01

    The programmer's task is often taken to be the construction of algorithms, expressed in hierarchical structures of procedures: this view underlies the majority of traditional programming languages, such as Fortran. A different view is appropriate to a wide class of problem, perhaps including some problems in High Energy Physics. The programmer's task is regarded as having three main stages: first, an explicit model is constructed of the reality with which the program is concerned; second, this model is elaborated to produce the required program outputs; third, the resulting program is transformed to run efficiently in the execution environment. The first two stages deal in network structures of sequential processes; only the third is concerned with procedure hierarchies.

  8. Different elution modes and field programming in gravitational field-flow fractionation. III. Field programming by flow-rate gradient generated by a programmable pump

    Czech Academy of Sciences Publication Activity Database

    Plocková, Jana; Chmelík, Josef

    2001-01-01

    Roč. 918, č. 2 (2001), s. 361-370 ISSN 0021-9673 R&D Projects: GA AV ČR IAA4031805 Institutional research plan: CEZ:AV0Z4031919 Keywords : field-flow fractionation * field programming * flow-rate gradients Subject RIV: CB - Analytical Chemistry, Separation Impact factor: 2.793, year: 2001

  9. Does early mentorship in child and adolescent psychiatry make a difference? The Klingenstein Third-Generation Foundation Medical Student Fellowship Program.

    Science.gov (United States)

    Stein, Joshua A; Althoff, Robert; Anders, Thomas; Davison, Yoshie; Edwards, Sarah; Frosch, Emily; Horst, Robert; Hudziak, James J; Hunt, Jeffrey; Joshi, Shashank V; Kitts, Robert Li; Larson, Justine; Leckman, James; O'Brien, John; Lowenhaupt, Elizabeth; Pruitt, David; Malloy, Erin; Martin, Andres; Partner, Ashley; Sarles, Richard; Sikich, Linmarie; Wells, Lloyd; Kolevzon, Alexander

    2013-09-01

    There is a critical shortage of child and adolescent psychiatrists in the United States. Increased exposure, through mentorship, clinical experiences, and research opportunities, may increase the number of medical students selecting child and adolescent psychiatry (CAP) as a career choice. Between 2008 and 2011, 241 first-year participants of a program to increase exposure to CAP, funded by the Klingenstein Third-Generation Foundation (KTGF) at 10 medical schools completed baseline surveys assessing their opinions of and experiences in CAP, and 115 second-year participants completed follow-up surveys to reflect 1 year of experience in the KTGF Program. Students reported significantly increased positive perception of mentorship for career and research guidance, along with perceived increased knowledge and understanding of CAP. Results suggest that the KTGF Program positively influenced participating medical students, although future studies are needed to determine whether these changes will translate into more medical students entering the field of CAP.

  10. USING QUESTION GENERATING TECHNIQUE IN TEACHING READING COMPREHENSION FOR THE THIRD SEMESTER STUDENTS AT ENGLISH STUDY PROGRAM OF MUHAMMADIYAH UNIVERSITY OF BENGKULU

    Directory of Open Access Journals (Sweden)

    Washlurachim Safitri Safitri

    2016-04-01

    Full Text Available The objective of this research was to find out Using Question Generating Technique Toward Students Reading Comprehension At The Third Semester Students At English Study Program Of Muhammadiyah University Of Bengkulu. The design of this research was Quasi experimental research. The subject of this research is students at the third semester of English study program. They were A class  that consist of 20 students and D class that consist of 20 students. In collecting data, the researcher used some steps; firstly the students were given a pre-test before the researcher applied Question Generating Technique. Then, the researcher did the treatment for three meetings to the experimental class, after that the researcher did post test to both classes. The last, the researcher analyzed the result of reading test by using criteria for the assessment. The final step was the researcher discussed and concluded the data. The result of this research showed that the tobt was  4,880. Whereas, the degree of freedom of post-test is 68, means that the ttable was 2.021. Based on the scores gained, it shows that tobt is higher than ttable (9,911>4,880. There is a significant difference between the post-test mean of the experimental and control class. The result also showed that the students’ comprehension in reading was significantly. In conclusion, the Question Generating Technique had been successfully gave positive effect to the students’ reading comprehension particularly in reading subject in English study program of University Muhammadiyah of Bengkulu.  Key Words : Question Generating Technique, Reading comprehension,

  11. Academic Capitalism in the College Union: The Relationship between Revenue Generation and Students' Perceptions of Program Effectiveness

    Science.gov (United States)

    Willis, Thearon Gifford, Jr.

    2014-01-01

    Students continue to incur a larger portion of the cost of a college education and in doing so, they increasingly become consumers. Expanding on a small base of literature linking revenues and students' experience, this study uses a conceptual framework of academic capitalism to explore the extent of revenue generation in the college union and…

  12. Training the next Generation of Renaissance Scientists: The GK-12 Ecologists, Educators, and Schools Program at the University of Montana

    Science.gov (United States)

    McBride, Brooke Baldauf; Brewer, Carol A.; Bricker, Mary; Machura, Michael

    2011-01-01

    In response to the need to prepare students to meet the challenges of the twenty-first century, new models of graduate education are being developed across the country. One model is provided by the National Science Foundation's Graduate Teaching Fellows in K-12 Education (GK-12) program, which broadens graduate students' training beyond their…

  13. Generation Next

    Science.gov (United States)

    Hawkins, B. Denise

    2010-01-01

    There is a shortage of accounting professors with Ph.D.s who can prepare the next generation. To help reverse the faculty deficit, the American Institute of Certified Public Accountants (CPAs) has created the new Accounting Doctoral Scholars program by pooling more than $17 million and soliciting commitments from more than 70 of the nation's…

  14. A Summary Description of a Computer Program Concept for the Design and Simulation of Solar Pond Electric Power Generation Systems

    Science.gov (United States)

    1984-01-01

    A solar pond electric power generation subsystem, an electric power transformer and switch yard, a large solar pond, a water treatment plant, and numerous storage and evaporation ponds. Because a solar pond stores thermal energy over a long period of time, plant operation at any point in time is dependent upon past operation and future perceived generation plans. This time or past history factor introduces a new dimension in the design process. The design optimization of a plant must go beyond examination of operational state points and consider the seasonal variations in solar, solar pond energy storage, and desired plant annual duty-cycle profile. Models or design tools will be required to optimize a plant design. These models should be developed in order to include a proper but not excessive level of detail. The model should be targeted to a specific objective and not conceived as a do everything analysis tool, i.e., system design and not gradient-zone stability.

  15. Development in fiscal 1999 of technologies to put photovoltaic power generation systems into practical use. International cooperation projects (Collection of information on IEA photovoltaic power generation program); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Kokusai kyoryoku jigyo (IEA taiyoko hatsuden program ni kansuru joho shushu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Items of information were collected on development of technologies to put photovoltaic power generation systems into practical use, the international cooperation projects, and the IEA photovoltaic power generation program. This paper summarizes the achievements in fiscal 1999. In the activities of IEA/REWP/PVPS in the current fiscal year, the 13th and 14th Executive Committee meetings, and the 3rd Executive Conference were held. The Task 1 has performed such activities as ISR, NSR, Newsletters, and opening the Internet homepage. The Task 2 activities included structuring about 260 databases for the operation characteristics of photovoltaic power generation systems, and completing the internal material handbooks on measurement and monitoring. A new work plan was prepared for the Task 3 regarding an independent photovoltaic power generation plant for use in an island. For the building integrated photovoltaic power generation system in the Task 7, survey activities were executed by utilizing expertise conferences on building designs, system technologies, and non-technical impediments. In the feasibility survey and research on large-scale photovoltaic power generation utilizing unused land such as desert for the Task 8, the programs were established. (NEDO)

  16. Technical management plan for sample generation, analysis, and data review for Phase 2 of the Clinch River Environmental Restoration Program

    International Nuclear Information System (INIS)

    Brandt, C.C.; Benson, S.B.; Beeler, D.A.

    1994-03-01

    The Clinch River Remedial Investigation (CRRI) is designed to address the transport, fate, and distribution of waterborne contaminants (radionuclides, metals, and organic compounds) released from the US Department of Energy's (DOE's) Oak Ridge Reservation (ORR) and to assess potential risks to human health and the environment associated with these contaminants. The remedial investigation is entering Phase 2, which has the following items as its objectives: define the nature and extent of the contamination in areas downstream from the DOE ORR, evaluate the human health and ecological risks posed by these contaminants, and perform preliminary identification and evaluation of potential remediation alternatives. This plan describes the requirements, responsibilities, and roles of personnel during sampling, analysis, and data review for the Clinch River Environmental Restoration Program (CR-ERP). The purpose of the plan is to formalize the process for obtaining analytical services, tracking sampling and analysis documentation, and assessing the overall quality of the CR-ERP data collection program to ensure that it will provide the necessary building blocks for the program decision-making process

  17. A program to generate simulated radioxenon beta–gamma data for concentration verification and validation and training exercises

    Energy Technology Data Exchange (ETDEWEB)

    McIntyre, Justin I.; Schrom, Brian T.; Cooper, Matthew W.; Prinke, Amanda M.; Suckow, Thomas J.; Ringbom, Anders; Warren, Glen A.

    2016-03-08

    Abstract Several hundred simulated radioxenon beta-gamma data files were developed to assist in evaluating the performance and results from radioxenon concentration calculation analysis at the International Data Center (IDC) and other National Data Centers (NDC). PNNL developed a Beta-Gamma Simulator (BGSim) that incorporated GEANT-modeled data sets from radioxenon decay chains, as well as functionality to use nuclear detector-acquired data sets to create new beta-gamma spectra with varying amounts of background, 133Xe, 131mXe, 133mXe, 135Xe, and 222Rn and its decay products. The program has been implemented on a web-based applications platform and allows the user to create very specific data sets that incorporate most of the operational parameters for the current beta-gamma systems deployed in the International Monitoring System (IMS) and the On-site Inspection (OSI) equipment. After an initial beta-gamma simulations program was developed, additional uses began to be identified for the program output: training sets of two-dimensional spectra for data analysts at the IDC and other NDC, spectra for exercises such as the Integrated Field Exercise 2014 (IFE14) held in Jordan at the Dead Sea, and testing new analysis methods and algorithms

  18. DARTAB: a program to combine airborne radionuclide environmental exposure data with dosimetric and health effects data to generate tabulations of predicted health impacts

    International Nuclear Information System (INIS)

    Begovich, C.L.; Eckerman, K.F.; Schlatter, E.C.; Ohr, S.Y.; Chester, R.O.

    1981-08-01

    The DARTAB computer code combines radionuclide environmental exposure data with dosimetric and health effects data to generate tabulations of the predicted impact of radioactive airborne effluents. DARTAB is independent of the environmental transport code used to generate the environmental exposure data and the codes used to produce the dosimetric and health effects data. Therefore human dose and risk calculations need not be added to every environmental transport code. Options are included in DARTAB to permit the user to request tabulations by various topics (e.g., cancer site, exposure pathway, etc.) to facilitate characterization of the human health impacts of the effluents. The DARTAB code was written at ORNL for the US Environmental Protection Agency, Office of Radiation Programs

  19. Generating demand and community support for sexual and reproductive health services for young people: A review of the Literature and Programs

    Directory of Open Access Journals (Sweden)

    Cabral de Mello Meena

    2010-09-01

    Full Text Available Abstract Background This review investigates the effectiveness of interventions aimed at generating demand for and use of sexual and reproductive health (SRH services by young people; and interventions aimed at generating wider community support for their use. Methods Reports and publications were found in the peer-reviewed and grey literature through academic search engines; web searches; the bibliographies of known conference proceedings and papers; and consultation with experts. The studies were reviewed against a set of inclusion criteria and those that met these were explored in more depth. Results The evidence-base for interventions aimed at both generating demand and community support for SRH services for young people was found under-developed and many available studies do not provide strong evidence. However, the potential of several methods to increase youth uptake has been demonstrated, this includes the linking of school education programs with youth friendly services, life skills approaches and social marketing and franchising. There is also evidence that the involvement of key community gatekeepers such as parents and religious leaders is vital to generating wider community support. In general a combined multi-component approach seems most promising with several success stories to build on. Conclusions Many areas for further research have been highlighted and there is a great need for more rigorous evaluation of programmes in this area. In particular, further evaluation of individual components within a multi-component approach is needed to elucidate the most effective interventions.

  20. Generating demand and community support for sexual and reproductive health services for young people: A review of the Literature and Programs.

    Science.gov (United States)

    Kesterton, Amy J; Cabral de Mello, Meena

    2010-09-24

    This review investigates the effectiveness of interventions aimed at generating demand for and use of sexual and reproductive health (SRH) services by young people; and interventions aimed at generating wider community support for their use. Reports and publications were found in the peer-reviewed and grey literature through academic search engines; web searches; the bibliographies of known conference proceedings and papers; and consultation with experts. The studies were reviewed against a set of inclusion criteria and those that met these were explored in more depth. The evidence-base for interventions aimed at both generating demand and community support for SRH services for young people was found under-developed and many available studies do not provide strong evidence. However, the potential of several methods to increase youth uptake has been demonstrated, this includes the linking of school education programs with youth friendly services, life skills approaches and social marketing and franchising. There is also evidence that the involvement of key community gatekeepers such as parents and religious leaders is vital to generating wider community support. In general a combined multi-component approach seems most promising with several success stories to build on. Many areas for further research have been highlighted and there is a great need for more rigorous evaluation of programmes in this area. In particular, further evaluation of individual components within a multi-component approach is needed to elucidate the most effective interventions.

  1. Progress report No. 41 for a program of thermoelectric generator testing and RTG degradation-mechanisms evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Shields, V.

    1981-09-01

    Sublimation tests conducted on Si/sub 3/N/sub 4/ coated SiGe (78%-22%) legs and SiMo hot shoes produced by G.E. were continued during this reporting period. The present test time for the SiGe legs is 1623 hours, while that for the SiMo hot-shoes is 1028 hours. No unexpected results have been observed. G.E.'s conjecture that the coatings on the SiGe legs which we presently have on test are faulty is confirmed, as this material has displayed coating failure on all n-doped samples at 1150/sup 0/C with failures beginning to show at 1100/sup 0/C. No coating failures have been observed on the hot shoes on test. Thermal conductivity tests conducted on SiGe (78% to 22%) material were extended to over 6000 hours with excellent agreement with MHW results. Testing of the 4 couple module PR-1 has been conducted for over 2,000 hours with similar agreement with past MHW tests. Testing of the Q1-A generator is continuing. The present test time is 33,632 hours. The performance of the generator remains smooth and continuous. Testing of the S/N-1 and S/N-3 eighteen couple modules has been extended to 35,105 hours and 32,403 hours, respectively. As with the Q1-A generator, the performance of these modules remains steady and smooth. Comparisons between computer predictions and the actual performance of the RTGs aboard the Voyager I and II spacecrafts has been extended to approximately four years. The agreement with prediction, in both cases, is within 0.5 percent. The corresponding comparisons for the LES-8 and LES-9 RTGs are for over five years with the same excellent agreement.

  2. Sodium-water wastage and reactions program performed by general electric in support of the US. AEC LMFBR steam generator development

    International Nuclear Information System (INIS)

    Greene, D.A.

    1975-01-01

    This paper constitutes an interim report on the sodium-water reaction programs performed, using the GE-SOWAT, GE-SMALL LEAK BEHAVIOR RIG, and GE-PTTR facilities in support of LMFBR steam generator development and its application to the Clinch River Breeder Reactor Plant. Test data from these rigs are presented, including wastage data as a function of water injection rate, sodium temperature, and orifice geometry. Initial results for self-wastage of defects under prototypical conditions, and from proof-of-principle tests of a protected heat transfer tube concept are also presented. An analytical basis for wastage phenomena is suggested. (author)

  3. 21st Century Power Partnership Fellowship Program: Supporting Next-generation Planning Modeling Practices at South Africa's Power Utility Eskom

    Energy Technology Data Exchange (ETDEWEB)

    Zinaman, Owen

    2016-10-01

    This presentation details the 21st Century Power Partnership's fellowship program accomplishments from 2016. This fellowship brought two fellows from South Africa's power utility, Eskom, to the U.S. Department of Energy's National Renewable Energy Laboratory. The fellows spent two weeks working to improve the fidelity of Eskom's PLEXOS long-term and short-term models, which are used in long-term generation planning exercises and capacity adequacy assessments. The fellows returned to Eksom equipped with a new suite of tools and skills to enhance Eksom's PLEXOS modeling capabilities.

  4. Neutron source investigations in support of the cross section program at the Argonne Fast-Neutron Generator

    International Nuclear Information System (INIS)

    Meadows, J.W.; Smith, D.L.

    1980-05-01

    Experimental methods related to the production of neutrons for cross section studies at the Argonne Fast-Neutron Generator are reviewed. Target assemblies commonly employed in these measurements are described, and some of the relevant physical properties of the neutron source reactions are discussed. Various measurements have been performed to ascertain knowledge about these source reaction that is required for cross section data analysis purposes. Some results from these studies are presented, and a few specific examples of neutron-source-related corrections to cross section data are provided. 16 figures, 3 tables

  5. Programed oil generation of the Zubair Formation, Southern Iraq oil fields: Results from Petromod software modeling and geochemical analysis

    Science.gov (United States)

    Al-Ameri, T. K.; Pitman, Janet K.; Naser, M.E.; Zumberge, J.; Al-Haydari, H. A.

    2011-01-01

    1D petroleum system modeling was performed on wells in each of four oil fields in South Iraq, Zubair (well Zb-47), Nahr Umr (well NR-9), West Qurna (well WQ-15 and 23), and Majnoon (well Mj-8). In each of these fields, deposition of the Zubair Formation was followed by continuous burial, reaching maximum temperatures of 100°C (equivalent to 0.70%Ro) at depths of 3,344–3,750 m of well Zb-47 and 3,081.5–3,420 m of well WQ-15, 120°C (equivalent to 0.78%Ro) at depths of 3,353–3,645 m of well NR-9, and 3,391–3,691.5 m of well Mj-8. Generation of petroleum in the Zubair Formation began in the late Tertiary, 10 million years ago. At present day, modeled transformation ratios (TR) indicate that 65% TR of its generation potential has been reached in well Zb-47, 75% TR in well NR-9 and 55-85% TR in West Qurna oil field (wells WQ-15 and WQ-23) and up to 95% TR in well Mj-8, In contrast, younger source rocks are immature to early mature (petroleum potential of 0.4–9.98 of good hydrocarbon generation, which is consistent with 55–95% hydrocarbon efficiency. These generated hydrocarbons had charged (in part) the Cretaceous and Tertiary reservoirs, especially the Zubair Formation itself, in the traps formed by Alpine collision that closed the Tethys Ocean between Arabian and Euracian Plates and developed folds in Mesopotamian Basin 15–10 million years ago. These traps are mainly stratigraphic facies of sandstones with the shale that formed during the deposition of the Zubair Formation in transgression and regression phases within the main structural folds of the Zubair, Nahr Umr, West Qurna and Majnoon Oil fields. Oil biomarkers of the Zubair Formation Reservoirs are showing source affinity with mixed oil from the Upper Jurassic and Lower Cretaceous strata, including Zubair Formation organic matters, based on presentation of GC and GC-MS results on diagrams of global petroleum systems.

  6. Computational exploration of cis-regulatory modules in rhythmic expression data using the "Exploration of Distinctive CREs and CRMs" (EDCC) and "CRM Network Generator" (CNG) programs.

    Science.gov (United States)

    Bekiaris, Pavlos Stephanos; Tekath, Tobias; Staiger, Dorothee; Danisman, Selahattin

    2018-01-01

    Understanding the effect of cis-regulatory elements (CRE) and clusters of CREs, which are called cis-regulatory modules (CRM), in eukaryotic gene expression is a challenge of computational biology. We developed two programs that allow simple, fast and reliable analysis of candidate CREs and CRMs that may affect specific gene expression and that determine positional features between individual CREs within a CRM. The first program, "Exploration of Distinctive CREs and CRMs" (EDCC), correlates candidate CREs and CRMs with specific gene expression patterns. For pairs of CREs, EDCC also determines positional preferences of the single CREs in relation to each other and to the transcriptional start site. The second program, "CRM Network Generator" (CNG), prioritizes these positional preferences using a neural network and thus allows unbiased rating of the positional preferences that were determined by EDCC. We tested these programs with data from a microarray study of circadian gene expression in Arabidopsis thaliana. Analyzing more than 1.5 million pairwise CRE combinations, we found 22 candidate combinations, of which several contained known clock promoter elements together with elements that had not been identified as relevant to circadian gene expression before. CNG analysis further identified positional preferences of these CRE pairs, hinting at positional information that may be relevant for circadian gene expression. Future wet lab experiments will have to determine which of these combinations confer daytime specific circadian gene expression.

  7. HeurAA: accurate and fast detection of genetic variations with a novel heuristic amplicon aligner program for next generation sequencing.

    Directory of Open Access Journals (Sweden)

    Lőrinc S Pongor

    Full Text Available Next generation sequencing (NGS of PCR amplicons is a standard approach to detect genetic variations in personalized medicine such as cancer diagnostics. Computer programs used in the NGS community often miss insertions and deletions (indels that constitute a large part of known human mutations. We have developed HeurAA, an open source, heuristic amplicon aligner program. We tested the program on simulated datasets as well as experimental data from multiplex sequencing of 40 amplicons in 12 oncogenes collected on a 454 Genome Sequencer from lung cancer cell lines. We found that HeurAA can accurately detect all indels, and is more than an order of magnitude faster than previous programs. HeurAA can compare reads and reference sequences up to several thousand base pairs in length, and it can evaluate data from complex mixtures containing reads of different gene-segments from different samples. HeurAA is written in C and Perl for Linux operating systems, the code and the documentation are available for research applications at http://sourceforge.net/projects/heuraa/

  8. Creating Next Generation Teacher Preparation Programs to Support Implementation of the Next Generation Science Standards and Common Core State Standards in K-12 Schools: An Opportunity for the Earth and Space Sciences

    Science.gov (United States)

    Geary, E. E.; Egger, A. E.; Julin, S.; Ronca, R.; Vokos, S.; Ebert, E.; Clark-Blickenstaff, J.; Nollmeyer, G.

    2015-12-01

    A consortium of two and four year Washington State Colleges and Universities in partnership with Washington's Office of the Superintendent of Public Instruction (OSPI), the Teachers of Teachers of Science, and Teachers of Teachers of Mathematics, and other key stakeholders, is currently working to improve science and mathematics learning for all Washington State students by creating a new vision for STEM teacher preparation in Washington State aligned with the Next Generation Science Standards (NGSS) and the Common Core State Standards (CCSS) in Mathematics and Language Arts. Specific objectives include: (1) strengthening elementary and secondary STEM Teacher Preparation courses and curricula, (2) alignment of STEM teacher preparation programs across Washington State with the NGSS and CCSS, (3) development of action plans to support implementation of STEM Teacher Preparation program improvement at Higher Education Institutions (HEIs) across the state, (4) stronger collaborations between HEIs, K-12 schools, government agencies, Non-Governmental Organizations, and STEM businesses, involved in the preparation of preservice STEM teachers, (5) new teacher endorsements in Computer Science and Engineering, and (6) development of a proto-type model for rapid, adaptable, and continuous improvement of STEM teacher preparation programs. A 2015 NGSS gap analysis of teacher preparation programs across Washington State indicates relatively good alignment of courses and curricula with NGSS Disciplinary Core Ideas and Scientific practices, but minimal alignment with NGSS Engineering practices and Cross Cutting Concepts. Likewise, Computer Science and Sustainability ideas and practices are not well represented in current courses and curricula. During the coming year teams of STEM faculty, education faculty and administrators will work collaboratively to develop unique action plans for aligning and improving STEM teacher preparation courses and curricula at their institutions.

  9. Getting To Exascale: Applying Novel Parallel Programming Models To Lab Applications For The Next Generation Of Supercomputers

    Energy Technology Data Exchange (ETDEWEB)

    Dube, Evi [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Shereda, Charles [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Nau, Lee [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Harris, Lance [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2010-09-27

    As supercomputing moves toward exascale, node architectures will change significantly. CPU core counts on nodes will increase by an order of magnitude or more. Heterogeneous architectures will become more commonplace, with GPUs or FPGAs providing additional computational power. Novel programming models may make better use of on-node parallelism in these new architectures than do current models. In this paper we examine several of these novel models – UPC, CUDA, and OpenCL –to determine their suitability to LLNL scientific application codes. Our study consisted of several phases: We conducted interviews with code teams and selected two codes to port; We learned how to program in the new models and ported the codes; We debugged and tuned the ported applications; We measured results, and documented our findings. We conclude that UPC is a challenge for porting code, Berkeley UPC is not very robust, and UPC is not suitable as a general alternative to OpenMP for a number of reasons. CUDA is well supported and robust but is a proprietary NVIDIA standard, while OpenCL is an open standard. Both are well suited to a specific set of application problems that can be run on GPUs, but some problems are not suited to GPUs. Further study of the landscape of novel models is recommended.

  10. Dynamic Programming Algorithm for Generation of Optimal Elimination Trees for Multi-frontal Direct Solver Over H-refined Grids

    KAUST Repository

    AbouEisha, Hassan M.

    2014-06-06

    In this paper we present a dynamic programming algorithm for finding optimal elimination trees for computational grids refined towards point or edge singularities. The elimination tree is utilized to guide the multi-frontal direct solver algorithm. Thus, the criterion for the optimization of the elimination tree is the computational cost associated with the multi-frontal solver algorithm executed over such tree. We illustrate the paper with several examples of optimal trees found for grids with point, isotropic edge and anisotropic edge mixed with point singularity. We show the comparison of the execution time of the multi-frontal solver algorithm with results of MUMPS solver with METIS library, implementing the nested dissection algorithm.

  11. Comp Plan: A computer program to generate dose and radiobiological metrics from dose-volume histogram files.

    Science.gov (United States)

    Holloway, Lois Charlotte; Miller, Julie-Anne; Kumar, Shivani; Whelan, Brendan M; Vinod, Shalini K

    2012-01-01

    Treatment planning studies often require the calculation of a large number of dose and radiobiological metrics. To streamline these calculations, a computer program called Comp Plan was developed using MATLAB. Comp Plan calculates common metrics, including equivalent uniform dose, tumor control probability, and normal tissue complication probability from dose-volume histogram data. The dose and radiobiological metrics can be calculated for the original data or for an adjusted fraction size using the linear quadratic model. A homogeneous boost dose can be added to a given structure if desired. The final output is written to an Excel file in a format convenient for further statistical analysis. Comp Plan was verified by independent calculations. A lung treatment planning study comparing 45 plans for 7 structures using up to 6 metrics for each structure was successfully analyzed within approximately 5 minutes with Comp Plan. The code is freely available from the authors on request. Crown Copyright © 2012. Published by Elsevier Inc. All rights reserved.

  12. Contribution to the study on and evaluation of radioactive waste generation in connection with the Brazilian Nuclear Program

    International Nuclear Information System (INIS)

    Melo, J.M.D. de.

    1978-12-01

    A general description is given of the causes of pollution in the nuclear industry. Emphasis was given to the radioactive pollution, especially radioactivity of fission products (FP). Physical mathematical models were established to calculate the FP activities 'in' and 'out' of the reactor and the yearly accumulated activities. To calculate FP activities 'in' reactor, all physical process of formation and destruction of nuclides were considered: nuclear fission; neutron absorption and radioactivity decay. The necessary input data were analysed and criticised. The specific activities of the discharged fuel were calculated and also their evolution outside reactor. The annual accumulation of FP activities were also calculated for the reference case: the Brazilian Nuclear Program for a 50 year horizon. The results were commented and specific discussions and comparison with other similar studies were made. (Author) [pt

  13. Is the introduction of an accreditation program likely to generate organization-wide quality, change and learning?

    Science.gov (United States)

    Lanteigne, Gilles; Bouchard, Chantal

    2016-07-01

    This research assesses whether integration of Accreditation Canada's program brings about change and organizational learning. Two health organizations, the Health Authority of Anguilla and the Ca' Foncella Opetale di Treviso, are studied on three levels: (1) members; (2) accreditation teams; and (3) organization. The methods used to collect data consisted of individual questionnaires administered to team members, semi-formal interviews with team leaders and quality coordinators, a documentation review and periodic assessments of compliance with the standards. The findings indicate that the organizations made strategic, organizational and relational changes. They improved their systems and management practices as well as their internal and external communications. There was also useful learning by individuals, teams and the organizations. Individual learning involved quality practice, client-focused approach, risk management, ethics, participatory management and assessment of services. The "self-assessment" and "make improvements and follow up on recommendations" stages of the accreditation cycle contributed the most to change and organizational learning. The interdisciplinary accreditation teams were the preferred vehicle for achieving these changes and this learning. The Health Authority of Anguilla and Ca' Foncella Opetale di Treviso have gradually improved their level of compliance with the standards in all quality dimensions. However, improvement in the overall compliance level was below the program's minimum requirements to obtain accreditation status without major restrictions. The scope of the changes and learning achieved raises the issue of the capacity of organizations to formalize this new knowledge throughout the organization. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

  14. Liquid-Crystal Thermosets, a New Generation of High-Performance Liquid-Crystal Polymers

    Science.gov (United States)

    Dingemans, Theo; Weiser, Erik; Hou, Tan; Jensen, Brian; St. Clair, Terry

    2004-01-01

    One of the major challenges for NASA's next-generation reusable-launch-vehicle (RLV) program is the design of a cryogenic lightweight composite fuel tank. Potential matrix resin systems need to exhibit a low coefficient of thermal expansion (CTE), good mechanical strength, and excellent barrier properties at cryogenic temperatures under load. In addition, the resin system needs to be processable by a variety of non-autoclavable techniques, such as vacuum-bag curing, resin-transfer molding (RTM), vacuum-assisted resin-transfer molding (VaRTM), resin-film infusion (RFI), pultrusion, and advanced tow placement (ATP). To meet these requirements, the Advanced Materials and Processing Branch (AMPB) at NASA Langley Research Center developed a new family of wholly aromatic liquid-crystal oligomers that can be processed and thermally cross-linked while maintaining their liquid-crystal order. All the monomers were polymerized in the presence of a cross-linkable unit by use of an environmentally benign melt-condensation technique. This method does not require hazardous solvents, and the only side product is acetic acid. The final product can be obtained as a powder or granulate and has an infinite shelf life. The obtained oligomers melt into a nematic phase and do not exhibit isotropization temperatures greater than the temperatures of decomposition (Ti > T(sub dec)). Three aromatic formulations were designed and tested and included esters, ester-amides, and ester-imides. One of the major advantages of this invention, named LaRC-LCR or Langley Research Center-Liquid Crystal Resin, is the ability to control a variety of resin characteristics, such as melting temperature, viscosity, and the cross-link density of the final part. Depending on the formulation, oligomers can be prepared with melt viscosities in the range of 10-10,000 poise (100 rad/s), which can easily be melt-processed using a variety of composite-processing techniques. This capability provides NASA with custom

  15. WheelerLab: An interactive program for sequence stratigraphic analysis of seismic sections, outcrops and well sections and the generation of chronostratigraphic sections and dynamic chronostratigraphic sections

    Science.gov (United States)

    Amosu, Adewale; Sun, Yuefeng

    WheelerLab is an interactive program that facilitates the interpretation of stratigraphic data (seismic sections, outcrop data and well sections) within a sequence stratigraphic framework and the subsequent transformation of the data into the chronostratigraphic domain. The transformation enables the identification of significant geological features, particularly erosional and non-depositional features that are not obvious in the original seismic domain. Although there are some software products that contain interactive environments for carrying out chronostratigraphic analysis, none of them are open-source codes. In addition to being open source, WheelerLab adds two important functionalities not present in currently available software: (1) WheelerLab generates a dynamic chronostratigraphic section and (2) WheelerLab enables chronostratigraphic analysis of older seismic data sets that exist only as images and not in the standard seismic file formats; it can also be used for the chronostratigraphic analysis of outcrop images and interpreted well sections. The dynamic chronostratigraphic section sequentially depicts the evolution of the chronostratigraphic chronosomes concurrently with the evolution of identified genetic stratal packages. This facilitates a better communication of the sequence-stratigraphic process. WheelerLab is designed to give the user both interactive and interpretational control over the transformation; this is most useful when determining the correct stratigraphic order for laterally separated genetic stratal packages. The program can also be used to generate synthetic sequence stratigraphic sections for chronostratigraphic analysis.

  16. WheelerLab: An interactive program for sequence stratigraphic analysis of seismic sections, outcrops and well sections and the generation of chronostratigraphic sections and dynamic chronostratigraphic sections

    Directory of Open Access Journals (Sweden)

    Adewale Amosu

    2017-01-01

    Full Text Available WheelerLab is an interactive program that facilitates the interpretation of stratigraphic data (seismic sections, outcrop data and well sections within a sequence stratigraphic framework and the subsequent transformation of the data into the chronostratigraphic domain. The transformation enables the identification of significant geological features, particularly erosional and non-depositional features that are not obvious in the original seismic domain. Although there are some software products that contain interactive environments for carrying out chronostratigraphic analysis, none of them are open-source codes. In addition to being open source, WheelerLab adds two important functionalities not present in currently available software: (1 WheelerLab generates a dynamic chronostratigraphic section and (2 WheelerLab enables chronostratigraphic analysis of older seismic data sets that exist only as images and not in the standard seismic file formats; it can also be used for the chronostratigraphic analysis of outcrop images and interpreted well sections. The dynamic chronostratigraphic section sequentially depicts the evolution of the chronostratigraphic chronosomes concurrently with the evolution of identified genetic stratal packages. This facilitates a better communication of the sequence-stratigraphic process. WheelerLab is designed to give the user both interactive and interpretational control over the transformation; this is most useful when determining the correct stratigraphic order for laterally separated genetic stratal packages. The program can also be used to generate synthetic sequence stratigraphic sections for chronostratigraphic analysis.

  17. Insulin sensitivity is normalized in the third generation (F3 offspring of developmentally programmed insulin resistant (F2 rats fed an energy-restricted diet

    Directory of Open Access Journals (Sweden)

    Martin John F

    2008-10-01

    Full Text Available Abstract Background/Aims The offspring and grandoffspring of female rats fed low protein diets during pregnancy and lactation, but fed nutritionally adequate diets thereafter, have been shown to exhibit altered insulin sensitivity in adulthood. The current study investigates the insulin sensitivity of the offspring and grandoffspring of female rats fed low protein diets during pregnancy, and then maintained on energy-restricted diets post weaning over three generations. Methods Female Sprague Dawley rats (F0 were mated with control males and protein malnourished during pregnancy/lactation. F1 offspring were then weaned to adequate but energy-restricted diets into adulthood. F1 dams were fed energy-restricted diets throughout pregnancy/lactation. F2 offspring were also fed energy-restricted diets post weaning. F2 pregnant dams were maintained as described above. Their F3 offspring were split into two groups; one was maintained on the energy-restricted diet, the other was maintained on an adequate diet consumed ad libitum post weaning. Results F2 animals fed energy-restricted diets were insulin resistant (p ad libitum postweaning diets (p Conclusion Maternal energy-restriction did not consistently program reduced insulin sensitivity in offspring over three consecutive generations. The reasons for this remain unclear. It is possible that the intergenerational transmission of developmentally programmed insulin resistance is determined in part by the relative insulin sensitivity of the mother during pregnancy/lactation.

  18. Requirements for a reactor simulator of the konvoi generation of nuclear power plants according to training programs

    International Nuclear Information System (INIS)

    Reinartz, S.J.; Reinartz, G.

    1984-01-01

    This report is based an a review of the literature published on simulator training and on discussions with representatives from the German nuclear power plant operator training schools. A brief description of the organisation and content of the simulator training of control room operators in a number of countries, together with a categorisation of the various types of simulators which are used. The concepts of the systems approach to training and simulator fidelity are discussed. Some general training principles which are considered important for simulator training are summarised. From the available descriptions and analyses of control room operator tasks, the skills (in most general terms) which can be trained on simulators have been identified. Methods for training these skills which are used in the simulator training programmes in various industries and which have been developed in research work in the area of training psychology have been summarised. Using these methods as a basis, the necessary instructor facilities which should be included in the design of a full simulator for the Konvoi generation of nuclear power plants have been derived. (orig.) [de

  19. Progress report No. 39 for a program of thermoelectric-generator testing and RTG degradation-mechanisms evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Lockwood, A.; Shields, V.

    1981-01-01

    Two neodymium selenide n-type legs and two new p-type Cu-Se legs have been set up for testing. Weight loss measurements for coated Si-Ge material produced by G.E. are reported. The coating on the n-type Si-Ge legs and the n-type side of the Si-Mo hot shoes has disappeared. The coating on the p-type side of the Si-Mo hot shoes has almost completely degraded. It is unlikely that the G.E. coatings have ever been effective. Thermal conductivity measurements are in agreement. The remaining MHW generator on test, Q1-A, has accumulated 28,600 hours and performance remains stable. The performance of the 18 couple modules remains stable. The S/N-1 module has accumulated 30,000 hours and the S/N-3 module has reached 27,300 hours. Telemetry data indicate no changes in the trends of degradation of LES 8 and 9 and the Voyager RTGs.

  20. Building a Robust Tumor Profiling Program: Synergy between Next-Generation Sequencing and Targeted Single-Gene Testing.

    Directory of Open Access Journals (Sweden)

    Matthew C Hiemenz

    Full Text Available Next-generation sequencing (NGS is a powerful platform for identifying cancer mutations. Routine clinical adoption of NGS requires optimized quality control metrics to ensure accurate results. To assess the robustness of our clinical NGS pipeline, we analyzed the results of 304 solid tumor and hematologic malignancy specimens tested simultaneously by NGS and one or more targeted single-gene tests (EGFR, KRAS, BRAF, NPM1, FLT3, and JAK2. For samples that passed our validated tumor percentage and DNA quality and quantity thresholds, there was perfect concordance between NGS and targeted single-gene tests with the exception of two FLT3 internal tandem duplications that fell below the stringent pre-established reporting threshold but were readily detected by manual inspection. In addition, NGS identified clinically significant mutations not covered by single-gene tests. These findings confirm NGS as a reliable platform for routine clinical use when appropriate quality control metrics, such as tumor percentage and DNA quality cutoffs, are in place. Based on our findings, we suggest a simple workflow that should facilitate adoption of clinical oncologic NGS services at other institutions.

  1. Building a Robust Tumor Profiling Program: Synergy between Next-Generation Sequencing and Targeted Single-Gene Testing.

    Science.gov (United States)

    Hiemenz, Matthew C; Kadauke, Stephan; Lieberman, David B; Roth, David B; Zhao, Jianhua; Watt, Christopher D; Daber, Robert D; Morrissette, Jennifer J D

    2016-01-01

    Next-generation sequencing (NGS) is a powerful platform for identifying cancer mutations. Routine clinical adoption of NGS requires optimized quality control metrics to ensure accurate results. To assess the robustness of our clinical NGS pipeline, we analyzed the results of 304 solid tumor and hematologic malignancy specimens tested simultaneously by NGS and one or more targeted single-gene tests (EGFR, KRAS, BRAF, NPM1, FLT3, and JAK2). For samples that passed our validated tumor percentage and DNA quality and quantity thresholds, there was perfect concordance between NGS and targeted single-gene tests with the exception of two FLT3 internal tandem duplications that fell below the stringent pre-established reporting threshold but were readily detected by manual inspection. In addition, NGS identified clinically significant mutations not covered by single-gene tests. These findings confirm NGS as a reliable platform for routine clinical use when appropriate quality control metrics, such as tumor percentage and DNA quality cutoffs, are in place. Based on our findings, we suggest a simple workflow that should facilitate adoption of clinical oncologic NGS services at other institutions.

  2. Game Changing Development Program - Next Generation Life Support Project: Oxygen Recovery From Carbon Dioxide Using Ion Exchange Membrane Electrolysis Technology

    Science.gov (United States)

    Burke, Kenneth A.; Jiao, Feng

    2016-01-01

    This report summarizes the Phase I research and development work performed during the March 13, 2015 to July 13, 2016 period. The proposal for this work was submitted in response to NASA Research Announcement NNH14ZOA001N, "Space Technology Research, Development, Demonstration, and Infusion 2014 (SpaceTech-REDDI-2014)," Appendix 14GCD-C2 "Game Changing Development Program, Advanced Oxygen Recovery for Spacecraft Life Support Systems Appendix" The Task Agreement for this Phase I work is Document Control Number: GCDP-02-TA-15015. The objective of the Phase I project was to demonstrate in laboratories two Engineering Development Units (EDU) that perform critical functions of the low temperature carbon dioxide electrolysis and the catalytic conversion of carbon monoxide into carbon and carbon dioxide. The low temperature carbon dioxide electrolysis EDU was built by the University of Delaware with Dr. Feng Jiao as the principal investigator in charge of this EDU development (under NASA Contract NNC15CA04C). The carbon monoxide catalytic conversion EDU was built by the NASA Glenn Research Center with Kenneth Burke as the principal investigator and overall project leader for the development of both EDUs. Both EDUs were successfully developed and demonstrated the critical functions for each process. The carbon dioxide electrolysis EDU was delivered to the NASA Johnson Space Center and the carbon monoxide catalytic conversion EDU was delivered to the NASA Marshall Spaceflight Center.

  3. Integrated plant safety assessment: systematic evaluation program. Oyster Creek nuclear generating station. GPU Nuclear Corporation and Jersey Central Power and Light Company. Docket No. 50-219

    International Nuclear Information System (INIS)

    1982-09-01

    The Systematic Evaluation Program was initiated in February 1978 by the US Nuclear Regulatory Commission to review the designs of older operating nuclear reactor plants to reconfirm and document their safety. The review provides (1) an assessment of how these plants compare with current licensing safety requirements relating to selected issues, (2) a basis for deciding on how these differences should be resolved in an integrated plant review, and (3) a documented evaluation of plant safety. This report documents the review of the Oyster Creek Nuclear Generating Station (located in Ocean County, New Jersey), one of ten plants reviewed under Phase II of this program, and indicates how 137 topics selected for review under Phase I of the program were addressed. Equipment and procedural changes have been identified as a result of the review. It is expected that this report will be one of the bases in considering the issuance of a full-term operating license in place of the existing provisional operating license

  4. Integrated plant safety assessment: Systematic Evaluation Program, San Onofre Nuclear Generating Station, Unit 1 (Docket No. 50-206): Final report

    International Nuclear Information System (INIS)

    1986-12-01

    The Systematic Evaluation Program was initiated in February 1977 by the US Nuclear Regulatory Commission to review the designs of older operating nuclear reactor plants to reconfirm and document their safety. The review provides: (1) an assessment of how these plants compare with current licensing safety requirements relating to selected issues; (2) a basis for deciding on how these differences should be resolved in an integrated plant review; and (3) a documented evaluation of plant safety. This report documents the review of San Onofre Nuclear Generating Station, Unit 1, operated by Southern California Edison Company. The San Onofre plant is one of ten plants reviewed under Phase II of this program. This report indicates how 137 topics selected for review under Phase I of the program were addressed. Equipment and procedural changes have been identified as a result of the review. This report will be one of the bases in considering the issuance of a full-term operating license in place of the existing provisional operating license. This report also addresses the comments and recommendations made by the Advisory Committee on Reactor Safeguards in connection with its review of the draft report issued in April 1985

  5. The SURA Coastal Ocean Observing and Prediction (SCOOP) Program: Adapting Web 2.0 technologies to power next generation science

    Science.gov (United States)

    Bogden, P.; Partners, S.

    2008-12-01

    The Web 2.0 has helped globalize the economy and change social interactions, but the full impact on coastal sciences has yet to be realized. The SCOOP program (www.OpenIOOS.org/about/sura.html), an initiative of the Coastal Research Committee of the Southeastern Universities Research Association (SURA), has been using Web 2.0 technologies to create infrastructure for a multi-disciplinary Distributed Coastal Laboratory (DCL). In the spirit of the Web 2.0, SCOOP strives to provide an open-access virtual facility where "virtual visiting" scientists can log in, perform experiments (e.g., evaluate new wetting/drying algorithms in several different inundation models), potentially contribute to the assembly of resources (e.g., leave their algorithms for others), and then move on. The SCOOP prototype has focused on storm surge and waves (the initial science focus), and integrates a real-time data network to evaluate the predictions. The multi-purpose SCOOP components support a sensor-web initiative (www.OOSTethys.org) that is co-led by SURA. SCOOP also includes portals with real-time visualization, workflow configuration and decision-tool prototypes (www.OpenIOOS.org), powered by distributed computing resources from multiple universities across the nation (www.sura.org/SURAgrid). Based on our experience, we propose three key ingredients for initiatives to have the biggest impact on coastal science: (1) standards, (2) working prototypes and (3) communities of interest. We strongly endorse the Open Geospatial Consortium - a geospatial analog of the World Wide Web consortium - and other international consensus-standards bodies that engage government, private sector and academic involvement. But these standards are often highly complex, which can be an impediment to their use. We have overcome such hurdles with the second key ingredient: a focused working prototype. The prototype should include guides and resources that make it easy for others to apply, test, and revise the

  6. Improvement of the reliability of the emergency diesel generators and their protections as a part of the modernization program for units 5 and 6 of the Kozloduy NPP

    International Nuclear Information System (INIS)

    Bogdanov, D.

    2003-01-01

    The measure 'Improvement of the reliability of the emergency diesel generators and their protections' 28411 is part of the modernization program for Units 5 and 6 of Kozloduy NPP. The scope of the measure includes complete change of the I and C system, the local control panels, the technological and electrical protections of the DG set, the excitation system and some of the power distribution switchboards. The new I and C system will be Teleperm XS type, produced by Framatome ANP, the power distribution switchboards type Sivacon, the excitation system Thyripart, and the electrical protection and synchronization system will be provided by Siemens. The purpose of the measure is to increase the availability, maintainability and to improve the reliability of the DG sets

  7. Development of an assessment tool to measure students′ perceptions of respiratory care education programs: Item generation, item reduction, and preliminary validation

    Directory of Open Access Journals (Sweden)

    Ghazi Alotaibi

    2013-01-01

    Full Text Available Objectives: Students who perceived their learning environment positively are more likely to develop effective learning strategies, and adopt a deep learning approach. Currently, there is no validated instrument for measuring the educational environment of educational programs on respiratory care (RC. The aim of this study was to develop an instrument to measure students′ perception of the RC educational environment. Materials and Methods: Based on the literature review and an assessment of content validity by multiple focus groups of RC educationalists, potential items of the instrument relevant to RC educational environment construct were generated by the research group. The initial 71 item questionnaire was then field-tested on all students from the 3 RC programs in Saudi Arabia and was subjected to multi-trait scaling analysis. Cronbach′s alpha was used to assess internal consistency reliabilities. Results: Two hundred and twelve students (100% completed the survey. The initial instrument of 71 items was reduced to 65 across 5 scales. Convergent and discriminant validity assessment demonstrated that the majority of items correlated more highly with their intended scale than a competing one. Cronbach′s alpha exceeded the standard criterion of >0.70 in all scales except one. There was no floor or ceiling effect for scale or overall score. Conclusions: This instrument is the first assessment tool developed to measure the RC educational environment. There was evidence of its good feasibility, validity, and reliability. This first validation of the instrument supports its use by RC students to evaluate educational environment.

  8. Program for certification of waste from contained firing facility: Establishment of waste as non-reactive and discussion of potential waste generation problems

    International Nuclear Information System (INIS)

    Green, L.; Garza, R.; Maienschein, J.; Pruneda, C.

    1997-01-01

    Debris from explosives testing in a shot tank that contains 4 weight percent or less of explosive is shown to be non-reactive under the specified testing protocol in the Code of Federal Regulations. This debris can then be regarded as a non-hazardous waste on the basis of reactivity, when collected and packaged in a specified manner. If it is contaminated with radioactive components (e.g. depleted uranium), it can therefore be disposed of as radioactive waste or mixed waste, as appropriate (note that debris may contain other materials that render it hazardous, such as beryllium). We also discuss potential waste generation issues in contained firing operations that are applicable to the planned new Contained Firing Facility (CFF). The goal of this program is to develop and document conditions under which shot debris from the planned Contained Firing Facility (CFF) can be handled, shipped, and accepted for waste disposal as non-reactive radioactive or mixed waste. This report fulfills the following requirements as established at the outset of the program: 1. Establish through testing the maximum level of explosive that can be in a waste and still have it certified as non-reactive. 2. Develop the procedure to confirm the acceptability of radioactive-contaminated debris as non-reactive waste at radioactive waste disposal sites. 3. Outline potential disposal protocols for different CFF scenarios (e.g. misfires with scattered explosive)

  9. Program for certification of waste from contained firing facility: Establishment of waste as non-reactive and discussion of potential waste generation problems

    Energy Technology Data Exchange (ETDEWEB)

    Green, L.; Garza, R.; Maienschein, J.; Pruneda, C.

    1997-09-30

    Debris from explosives testing in a shot tank that contains 4 weight percent or less of explosive is shown to be non-reactive under the specified testing protocol in the Code of Federal Regulations. This debris can then be regarded as a non-hazardous waste on the basis of reactivity, when collected and packaged in a specified manner. If it is contaminated with radioactive components (e.g. depleted uranium), it can therefore be disposed of as radioactive waste or mixed waste, as appropriate (note that debris may contain other materials that render it hazardous, such as beryllium). We also discuss potential waste generation issues in contained firing operations that are applicable to the planned new Contained Firing Facility (CFF). The goal of this program is to develop and document conditions under which shot debris from the planned Contained Firing Facility (CFF) can be handled, shipped, and accepted for waste disposal as non-reactive radioactive or mixed waste. This report fulfills the following requirements as established at the outset of the program: 1. Establish through testing the maximum level of explosive that can be in a waste and still have it certified as non-reactive. 2. Develop the procedure to confirm the acceptability of radioactive-contaminated debris as non-reactive waste at radioactive waste disposal sites. 3. Outline potential disposal protocols for different CFF scenarios (e.g. misfires with scattered explosive).

  10. Development in fiscal 1999 of technologies to put photovoltaic power generation systems into practical use. International cooperation projects (Collection of information on Task 9 in IEA photovoltaic power generation program); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Kokusai kyoryoku jigyo (IEA taiyoko hatsuden program task IX ni kansuru joho shushu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper reports activities performed by the Task 9 in the execution treaty of the IEA photovoltaic power generation system program. The Task 9 calls for the 'proliferation of photovoltaic power generation technologies under coordination with developing countries{sup .} It is intended to compile the recommendation guides, hold workshops in the model developing countries, and coordinate with assisting organizations on technological and economical issues that may occur when introducing photovoltaic power generation systems into developing countries. The current fiscal year is the first year of the five-year plan, whereas, with structuring the basic plan placed in the center, such activities were carried out as verification of the 12 member countries and two organizations, establishment of the basic programs for the work plan, selection of work divisions, the sharing thereof, and the subjected developing countries, and the way the coordination should be with the related tasks and the assisting organizations. Two expertise conferences were held in Holland and America, and three working group meetings in Japan to have discussed the activity targets in the first fiscal year. (NEDO)

  11. Autocommander: A Supervisory Controller for Integrated Guidance and Control for the 2nd Generation Reusable Launch Vehicle

    Science.gov (United States)

    Fisher, J. E.; Lawrence, D. A.; Zhu, J. J.; Jackson, Scott (Technical Monitor)

    2002-01-01

    This paper presents a hierarchical architecture for integrated guidance and control that achieves risk and cost reduction for NASA's 2d generation reusable launch vehicle (RLV). Guidance, attitude control, and control allocation subsystems that heretofore operated independently will now work cooperatively under the coordination of a top-level autocommander. In addition to delivering improved performance from a flight mechanics perspective, the autocommander is intended to provide an autonomous supervisory control capability for traditional mission management under nominal conditions, G&C reconfiguration in response to effector saturation, and abort mode decision-making upon vehicle malfunction. This high-level functionality is to be implemented through the development of a relational database that is populated with the broad range of vehicle and mission specific data and translated into a discrete event system model for analysis, simulation, and onboard implementation. A Stateflow Autocoder software tool that translates the database into the Stateflow component of a Matlab/Simulink simulation is also presented.

  12. Generative Contexts

    Science.gov (United States)

    Lyles, Dan Allen

    Educational research has identified how science, technology, engineering, and mathematics (STEM) practice and education have underperforming metrics in racial and gender diversity, despite decades of intervention. These disparities are part of the construction of a culture of science that is alienating to these populations. Recent studies in a social science framework described as "Generative Justice" have suggested that the context of social and scientific practice might be modified to bring about more just and equitable relations among the disenfranchised by circulating the value they and their non-human allies create back to them in unalienated forms. What is not known are the underlying principles of social and material space that makes a system more or less generative. I employ an autoethnographic method at four sites: a high school science class; a farm committed to "Black and Brown liberation"; a summer program geared towards youth environmental mapping; and a summer workshop for Harlem middle school students. My findings suggest that by identifying instances where material affinity, participatory voice, and creative solidarity are mutually reinforcing, it is possible to create educational contexts that generate unalienated value, and circulate it back to the producers themselves. This cycle of generation may help explain how to create systems of justice that strengthen and grow themselves through successive iterations. The problem of lack of diversity in STEM may be addressed not merely by recruiting the best and the brightest from underrepresented populations, but by changing the context of STEM education to provide tools for its own systematic restructuring.

  13. The gel generator project: the prospectus of a development program in which the gel generator is assessed as a suitable source of technetium-99m in clinical nuclear medicine

    International Nuclear Information System (INIS)

    Boyd, R.E.

    1987-02-01

    An overview is presented of the gel generator project based on the neutron activation of molybdenum. It operates through the simple technique of column elution, and the separated Tc-99m is not contaminated with undesirable radioactive or chemical impurities. The principles behind technetium generators are discussed, and publications and patents applying to the gel generator are listed

  14. The proposed human factors engineering program plan for man-machine interface system design of the next generation NPP in Korea

    International Nuclear Information System (INIS)

    Oh, I.S.; Lee, H.C.; Seo, S.M.; Cheon, S.W.; Park, K.O.; Lee, J.W.; Sim, B.S.

    1994-01-01

    Human factors application to nuclear power plant (NPP) design, especially, to man-machine interface system (MMIS) design becomes an important issue among the licensing requirements. Recently, the nuclear regulatory bodies require the evidence of systematic human factors application to the MMIS design. Human Factors Engineering Program Plan (HFEPP), as a basis and central one among the human factors application by the MMIS designers. This paper describes the framework of HFEPP for the MMIS design of next generation NPP (NG-NPP) in Korea. This framework provides an integral plan and some bases of the systematic application of human factors to the MMIS design, and consists of purpose and scope, codes and standards, human factors organization, human factors tasks, engineering control methodology, human factors documentations, and milestones. The proposed HFEPP is a top level document to define and describe human factors tasks, based on each step of MMIS design process, in view point of how, what, when and by whom to be performed. (author). 11 refs, 1 fig

  15. The National Institute of Environmental Health Sciences Superfund Research Program: a model for multidisciplinary training of the next generation of environmental health scientists.

    Science.gov (United States)

    Carlin, Danielle J; Henry, Heather; Heacock, Michelle; Trottier, Brittany; Drew, Christina H; Suk, William A

    2018-03-28

    The National Institute of Environmental Health Sciences (NIEHS) Superfund Research Program (SRP) funds university-based, multidisciplinary research on human health and environmental science and engineering with the central goals to understand how hazardous substances contribute to disease and how to prevent exposures to these environmental chemicals. This multi-disciplinary approach allows early career scientists (e.g. graduate students and postdoctoral researchers) to gain experience in problem-based, solution-oriented research and to conduct research in a highly collaborative environment. Training the next generation of environmental health scientists has been an important part of the SRP since its inception. In addition to basic research, the SRP has grown to include support of broader training experiences such as those in research translation and community engagement activities that provide opportunities to give new scientists many of the skills they will need to be successful in their field of research. Looking to the future, the SRP will continue to evolve its training component by tracking and analyzing outcomes from its trainees by using tools such as the NIEHS CareerTrac database system, by increasing opportunities for trainees interested in research that goes beyond US boundaries, and in the areas of bioinformatics and data integration. These opportunities will give them the skills needed to be competitive and successful no matter which employment sector they choose to enter after they have completed their training experience.

  16. Programming for seismogram 1-D generation, considering the attenuation and dispersing effects; Programa para gerar sismograma 1-D, considerando os efeitos da atenuacao e dispersao

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, Bruno de O.; Oliveira, Sergio A.M. de [Universidade Estadual do Norte Fluminense (UENF), Macae, RJ (Brazil). Lab. de Engenharia e Exploracao do Petroleo (LENEP)

    2004-07-01

    For a processing and an interpretation of correct seismic data, it is necessary to recognize and to know as the factors act that influence in the propagation of the seismic waves, as the attenuation and the dispersion, constituting in the biggest practical impediment for the use of seismic for targets the big depths, limiting the resolution of the method. However these phenomena little are taken in consideration in the analysis of the data, thus the necessity of its bigger agreement, because if attenuation and dispersion they confuse the application of the seismic, if convenient understood and measures, can be valuable sources of information about the constitution of the rocks. Therefore, in this work the effect of the attenuation and dispersion in the data of reflection seismic had been simulated on a program, in Mat-Lab. Being able to generate 1-D seismograms, in the domain of the time, considering the normal incidence of plain wave in a package of plain, horizontal and isotropic layers, taking in account the physical attributes of the way, being able to simulate the effects of ghost and of multiples of free surface, if considering the source in the water. (author)

  17. FTAP, Minimal Cut Sets of Arbitrary Fault Trees. FRTPLT, Fault Tree Structure and Logical Gates Plot for Program FTAP. FRTGEN, Fault Trees by Sub-tree Generator from Parent Tree for Program FTAP

    International Nuclear Information System (INIS)

    Willie, Randall R.; Rabien, U.

    1997-01-01

    1 - Description of problem or function: FTAP is a general-purpose program for deriving minimal reliability cut and path set families from the fault tree for a complex system. The program has a number of useful features that make it well-suited to nearly all fault tree applications. An input fault tree may specify the system state as any logical function of subsystem or component state variables or complements of these variables; thus, for instance, 'exclusive-or' type relations may be formed. When fault tree logical relations involve complements of state variables, the analyst may instruct FTAP to produce a family of prime implicants, a generalization of the minimal cut set concept. The program offers the flexibility of several distinct methods of generating cut set families. FTAP can also identify certain subsystems as system modules and provide a collection of minimal cut set families that essentially expresses the system state as a function of these module state variables. Another feature allows a useful subfamily to be obtained when the family of minimal cut sets or prime implicants is too large to be found in its entirety; this subfamily may consist of only those sets not containing more than some fixed number of elements or only those sets 'interesting' to the analyst in some special sense. Finally, the analyst can modify the input fault tree in various ways by declaring state variables identically true or false. 2 - Method of solution: Fault tree methods are based on the observation that the system state, either working or failed, can usually be expressed as a Boolean relation between states of several large, readily identifiable subsystems. The state of each subsystem in turn depends on states of simpler subsystems and components which compose it, so that the state of the system itself is determined by a hierarchy of logical relationships between states of subsystems. A fault tree is a graphical representation of these relationships. 3 - Restrictions on the

  18. Fibrinogen cleavage products and Toll-like receptor 4 promote the generation of programmed cell death 1 ligand 2-positive dendritic cells in allergic asthma.

    Science.gov (United States)

    Cho, Minkyoung; Lee, Jeong-Eun; Lim, Hoyong; Shin, Hyun-Woo; Khalmuratova, Roza; Choi, Garam; Kim, Hyuk Soon; Choi, Wahn Soo; Park, Young-Jun; Shim, Inbo; Kim, Byung-Seok; Kang, Chang-Yuil; Kim, Jae-Ouk; Tanaka, Shinya; Kubo, Masato; Chung, Yeonseok

    2017-10-14

    Inhaled protease allergens preferentially trigger T H 2-mediated inflammation in allergic asthma. The role of dendritic cells (DCs) on induction of T H 2 cell responses in allergic asthma has been well documented; however, the mechanism by which protease allergens induce T H 2-favorable DCs in the airway remains unclear. We sought to determine a subset of DCs responsible for T H 2 cell responses in allergic asthma and the mechanism by which protease allergens induce the DC subset in the airway. Mice were challenged intranasally with protease allergens or fibrinogen cleavage products (FCPs) to induce allergic airway inflammation. DCs isolated from mediastinal lymph nodes were analyzed for surface phenotype and T-cell stimulatory function. Anti-Thy1.2 and Mas-TRECK mice were used to deplete innate lymphoid cells and mast cells, respectively. Adoptive cell transfer, bone marrow DC culture, anti-IL-13, and Toll-like receptor (TLR) 4-deficient mice were used for further mechanistic studies. Protease allergens induced a remarkable accumulation of T H 2-favorable programmed cell death 1 ligand 2 (PD-L2) + DCs in mediastinal lymph nodes, which was significantly abolished in mice depleted of mast cells and, to a lesser extent, innate lymphoid cells. Mechanistically, FCPs generated by protease allergens triggered IL-13 production from wild-type mast cells but not from TLR4-deficient mast cells, which resulted in an increase in the number of PD-L2 + DCs. Intranasal administration of FCPs induced an increase in numbers of PD-L2 + DCs in the airway, which was significantly abolished in TLR4- and mast cell-deficient mice. Injection of IL-13 restored the PD-L2 + DC population in mice lacking mast cells. Our findings unveil the "protease-FCP-TLR4-mast cell-IL-13" axis as a molecular mechanism for generation of T H 2-favorable PD-L2 + DCs in allergic asthma and suggest that targeting the PD-L2 + DC pathway might be effective in suppressing allergic T-cell responses in the airway

  19. Reducing adverse self-medication behaviors in older adults with the Next Generation Personal Education Program (PEP-NG: Design and methodology

    Directory of Open Access Journals (Sweden)

    Patricia J Neafsey

    2009-11-01

    Full Text Available Patricia J Neafsey1,2, Elizabeth Anderson1,2, Craig Coleman3, Carolyn A Lin2,4, Cyr E M’lan5, Stephen Walsh61School of Nursing, 2Center for Health Intervention and Prevention (CHIP, 3School of Pharmacy, 4Department of Communication Sciences, 5Department of Statistics, 6Center for Nursing Research, School of Nursing, University of Connecticut, Storrs, CT, USAAbstract: A randomized controlled efficacy trial targeting older adults with hypertension is providing a tailored education intervention with a Next Generation Personal Education Program (PEP-NG in primary care practices in New England. Ten participating advanced practice registered nurses (APRNs completed online knowledge and self-efficacy measures pre-onsite training and twice more after completing a continuing education program. Patient participants self-refer in response to study recruitment brochures and posters. Twenty-four participants from each APRN practice (total N = 240 are randomly assigned by the PEP-NG software to either control (data collection and four routine APRN visits or tailored intervention (PEP-NG interface and four focused APRN visits conditions. Patients access the PEP-NG interface via wireless tablet and use a stylus to answer demographic, knowledge, and self-efficacy questions as well as prescription and over-the-counter self-medication practice questions. The PEP-NG analyzes patient-reported information and delivers tailored educational content. Patients’ outcome measures are self-reported antihypertensive medication adherence, blood pressure, knowledge and self-efficacy concerning potential adverse self-medication practices, adverse self-medication behavior “risk” score and satisfaction with the PEP-NG and APRN provider relationship. APRN outcome measures are knowledge and self-efficacy concerning adverse self-medication practices, self-efficacy for communicating with older adults and satisfaction with the PEP-NG. Time–motion and cost–benefit analyses

  20. Users manual. Pursuit program of use licenses of radioactive material or generator equipment of ionizing radiations; Manual del usuario. Programa de seguimiento de licencias de uso de material radiactivo o equipos generadores de radiaciones ionizantes

    Energy Technology Data Exchange (ETDEWEB)

    Becerril M, V.M.; Villarreal, J.E

    1992-05-15

    The objective of the program 'Databases for the pursuit of licenses of use of radioactive material', it consists on the application of a computer system carried out in dbase IV that it allows the control of the all the information related with those licenses for use, possession and storage of radioactive material or generator equipment of ionizing radiations. (Author)

  1. Rule-based programming and strategies for automated generation of detailed kinetic models for gas phase combustion of polycyclic hydrocarbon molecules; Programmation par regles et strategies pour la generation automatique de mecanismes de combustion d'hydrocarbures polycycliques

    Energy Technology Data Exchange (ETDEWEB)

    Ibanescu, L.

    2004-06-15

    The primary objective of this thesis is to explore the approach of using rule-based systems and strategies, for a complex problem of chemical kinetic: the automated generation of reaction mechanisms. The chemical reactions are naturally expressed as conditional rewriting rules. The control of the chemical reactions chaining is easy to describe using a strategies language, such as the one of the ELAN system, developed in the Protheo team. The thesis presents the basic concepts of the chemical kinetics, the chemical and computational problems related to the conception and validation of a reaction mechanism, and gives a general structure for the generator of reaction mechanisms called GasEI. Our research focuses on the primary mechanism generator. We give solutions for encoding the chemical species, the reactions and their chaining, and we present the prototype developed in ELAN. The representation of the chemical species uses the notion of molecular graphs, encoded by a term structure called GasEI terms. The chemical reactions are expressed by rewriting rules on molecular graphs, encoded by a set of conditional rewriting rules on GasEI terms. The strategies language of the ELAN system is used to express the reactions chaining in the primary mechanism generator. This approach is illustrated by coding ten generic reactions of the oxidizing pyrolysis. Qualitative chemical validations of the prototype show that our approach gives, for acyclic molecules, the same results as the existing mechanism generators, and for polycyclic molecules produces original results.

  2. Generation Z: Educating and Engaging the Next Generation of Students

    Science.gov (United States)

    Seemiller, Corey; Grace, Meghan

    2017-01-01

    In 1995, the Internet was born. So, too, was Generation Z. The oldest of this post-Millennial generation arrived to college in 2013, and more than four years later, Generation Z students fill the nation's classrooms, campus programs, and residence halls. In order to recruit, educate, and graduate this new generational cohort effectively, educators…

  3. Next Generation Target Control System

    National Research Council Canada - National Science Library

    1995-01-01

    Our objective was to evaluate the allegations concerning the Next Generation Target Control System Program and to determine whether the Program is the most cost effective solution to meet the target...

  4. Manual for the ELL (2) - parser generator and tree generator generator

    OpenAIRE

    Heckmann, Reinhold

    1986-01-01

    Regular right part grammars extended by tree generator specifications are interpreted by a combined parser generator and tree generator that produces an ELL(2) parser. This parser is able to translate programs of the specified language into abstract syntax trees according to the tree specifications in the generator input.

  5. Generating Units

    Data.gov (United States)

    Department of Homeland Security — Generating Units are any combination of physically connected generators, reactors, boilers, combustion turbines, and other prime movers operated together to produce...

  6. Silicon germanium (SiGe) radioisotope thermoelectric generator (RTG) program for space missions. Nineteenth technical progress report, December 1980-January 1981

    International Nuclear Information System (INIS)

    1981-01-01

    Work accomplished during the reporting period on the DOE Silicon Germanium RTG Program, Contract DE-AC01-79ET-32043 is described. This program consists of the following three tasks: multi-hundred watt RTG for the Galileo probe mission; reestablishment of silicon germanium unicouple capability; and general purpose heat source RTG for the international solar polar and Galileo orbiter missions. Details of program progress for each task, including a milestone schedule and a discussion of current problem areas (if any) are presented

  7. US/USSR cooperative program in open-cycle MHD electrical power generation: joint test report No. 3. Tests in the U-25B facility: MHD generator tests No. 4 and 5

    Energy Technology Data Exchange (ETDEWEB)

    Picologlou, B F; Batenin, V M [eds.

    1980-07-01

    A description of the modifications made to improve the plasma parameters of the U-25B Facility is presented. The oxygen enrichment system was modified to allow oxygen enrichment of up to 50% (by volume) ahead of the preheaters. Optimum design and operating conditions of the seed injection system were defined as a result of experimental investigations. An account of the extensive diagnostic studies performed and a description of the measurement techniques and of the new submillimeter laser interferometer are given. The performance of the MHD generator is analyzed for different operating modes. Studies of fluctuations and nonuniformities, current take-off distributions, local electrical analysis, overall heat transfer history of the MHD channel, and an extensive parametric study of the generator are presented. A detailed account of the complete disassembly and inspection of channel No. 1 after more than 100 hours of operation with the combustor, and of the condition of its various elements is also given.

  8. US/USSR cooperative program in open-cycle MHD electrical power generation: joint test report No. 3. Tests in the U-25B facility: MHD generator tests No. 4 and 5

    International Nuclear Information System (INIS)

    Picologlou, B.F.; Batenin, V.M.

    1980-07-01

    A description of the modifications made to improve the plasma parameters of the U-25B Facility is presented. The oxygen enrichment system was modified to allow oxygen enrichment of up to 50% (by volume) ahead of the preheaters. Optimum design and operating conditions of the seed injection system were defined as a result of experimental investigations. An account of the extensive diagnostic studies performed and a description of the measurement techniques and of the new submillimeter laser interferometer are given. The performance of the MHD generator is analyzed for different operating modes. Studies of fluctuations and nonuniformities, current take-off distributions, local electrical analysis, overall heat transfer history of the MHD channel, and an extensive parametric study of the generator are presented. A detailed account of the complete disassembly and inspection of channel No. 1 after more than 100 hours of operation with the combustor, and of the condition of its various elements is also given

  9. Business Case Analysis of the Walter Reed Army Medical Center Medical/Surgical Prime Vendor Generation III Service Level Electron Program

    National Research Council Canada - National Science Library

    Markot, Peter B

    2007-01-01

    ...) staffing and medical/surgical services offered under the Prime Vendor (PV) Generation III contract would provide the best supply chain management solution for Walter Reed Army Medical Center (WRAMC...

  10. The National Shipbuilding Research Program. REAPS 5th Annual Technical Symposium Proceedings. Paper No. 19: Interactive Lines Generation (HULGEN) With a Storage Tube (User Guide)

    National Research Council Canada - National Science Library

    Fuller, Arthur L

    1978-01-01

    .... It was originally written for refresh. graphics scopes with light pens. Those earlier versions of the program, although done for light pen picks, operated in a way that made conversion to storage tube graphics very practical...

  11. A Partnership Training Program in Breast Cancer Diagnosis: Concept Development of the Next Generation Diagnostic Breast Imaging Using Digital Image Library and Networking Techniques

    National Research Council Canada - National Science Library

    Chouikha, Mohamed F

    2004-01-01

    ...); and Georgetown University (Image Science and Information Systems, ISIS). In this partnership training program, we will train faculty and students in breast cancer imaging, digital image database library techniques and network communication strategy...

  12. Generational diversity.

    Science.gov (United States)

    Kramer, Linda W

    2010-01-01

    Generational diversity has proven challenges for nurse leaders, and generational values may influence ideas about work and career planning. This article discusses generational gaps, influencing factors and support, and the various generational groups present in today's workplace as well as the consequences of need addressing these issues. The article ends with a discussion of possible solutions.

  13. Report of the generation of the nuclear bank 'L1PG9121' of the SVEA-96 'collapsed' assemble for the FCS-II program with the FMS codes

    International Nuclear Information System (INIS)

    Alonso V, G.

    1992-01-01

    In this work it is described in a general way the form in that was generated the collapsed bank of the SVEA-96 fuel for Laguna Verde. The formation of the bank it was carried out with the ECLIPSE 86-2D, RECORD 89-1A and POLGEN 88-1B codes of the FMS package installed in the VAX system of the office of the National Commission of Nuclear Safety and Safeguards in Mexico D.F. The formed bank is denominated 'LlPG9121'. All this one carries out following the procedure '6F3/I/CN029/90/P1'. To generate the bank, both RECORD 'cells' that compose the assemble its were 'collapsed' in an alone one, representing this, the complete assemble in what refers to the distribution of fuel bar and enrichment. The collapsed of the assemble was made averaging the content of UO 2 and Gd 2 O 3 in each fuel bar of the one assemble. By this way the x-y array of fuel bars is conserved but a representative fuel cell of all the one assemble is obtained, being this the studied RECORD cell. In accordance with the requirements of nuclear information of FCS-II, the nuclear information generated with RECORD only was of the defined type as series 1 in the generation procedure of nuclear banks '6F3/I/CN029/90/P1'. This only means that only was generated nuclear information as function of the fuel burnt and of the vacuum in the fuel cell. Although the nuclear bank (L1PG9121) it was generated in these circumstances, it was also generates information of the defined type as series 2 with the present control bar for possible reactor analysis under these conditions. (Author)

  14. Program Fullerene

    DEFF Research Database (Denmark)

    Wirz, Lukas; Peter, Schwerdtfeger,; Avery, James Emil

    2013-01-01

    Fullerene (Version 4.4), is a general purpose open-source program that can generate any fullerene isomer, perform topological and graph theoretical analysis, as well as calculate a number of physical and chemical properties. The program creates symmetric planar drawings of the fullerene graph, an......-Fowler, and Brinkmann-Fowler vertex insertions. The program is written in standard Fortran and C++, and can easily be installed on a Linux or UNIX environment....

  15. Exploring New Paths: The First-Year Experiences for First-Generation College Students and the Impact of Participating in Comprehensive Programs

    Science.gov (United States)

    Nava, Michael E.

    2010-01-01

    The academic and social integration of first-generation college students into institutions of higher education continues to be a topic of concern for university administrators, faculty, and staff. Students enter college with different background traits and experiences as well as have different college experiences that can either permit or prohibit…

  16. Pathways to the Professoriate: The Experiences of First-Generation Latino Undergraduate Students at Hispanic Serving Institutions Applying to Doctoral Programs

    Science.gov (United States)

    Martinez, Andrew

    2018-01-01

    Despite representing the largest ethnic minority group in the United States, Latinos remain underrepresented in the professoriate. Although Latinos are increasingly attending college, fewer graduate and even fewer continue to pursue graduate school. Prior research has explained the challenges that first-generation college students encounter in…

  17. Preparing for a "Next Generation" Evaluation of Independent Living Programs for Youth in Foster Care: Project Overview. OPRE Report No. 2014-71

    Science.gov (United States)

    McDaniel, Marla; Courtney, Mark E.; Pergamit, Michael R.; Lowenstein, Christopher

    2014-01-01

    Youth transitioning out of foster care and into adulthood need multiple supports to navigate the challenges they face. Over the past three decades, federal child welfare policy has significantly increased the availability of those supports. In 1999, the Chafee Foster Care Independence Program was created, increasing the amount of funds potentially…

  18. Steam generator life management

    International Nuclear Information System (INIS)

    Tapping, R.L.; Nickerson, J.; Spekkens, P.; Maruska, C.

    1998-01-01

    Steam generators are a critical component of a nuclear power reactor, and can contribute significantly to station unavailability, as has been amply demonstrated in Pressurized Water Reactors (PWRs). CANDU steam generators are not immune to steam generator degradation, and the variety of CANDU steam generator designs and tube materials has led to some unexpected challenges. However, aggressive remedial actions, and careful proactive maintenance activities, have led to a decrease in steam generator-related station unavailability of Canadian CANDUs. AECL and the CANDU utilities have defined programs that will enable existing or new steam generators to operate effectively for 40 years. Research and development work covers corrosion and mechanical degradation of tube bundles and internals, chemistry, thermal hydraulics, fouling, inspection and cleaning, as well as provision for specially tool development for specific problem solving. A major driving force is development of CANDU-specific fitness-for-service guidelines, including appropriate inspection and monitoring technology to measure steam generator condition. Longer-range work focuses on development of intelligent on-line monitoring for the feedwater system and steam generator. New designs have reduced risk of corrosion and fouling, are more easily inspected and cleaned, and are less susceptible to mechanical damage. The Canadian CANDU utilities have developed programs for remedial actions to combat degradation of performance (Gentilly-2, Point Lepreau, Bruce A/B, Pickering A/B), and have developed strategic plans to ensure that good future operation is ensured. This report shows how recent advances in cleaning technology are integrated into a life management strategy, discusses downcomer flow measurement as a means of monitoring steam generator condition, and describes recent advances in hideout return as a life management tool. The research and development program, as well as operating experience, has identified

  19. Instant Generation

    Science.gov (United States)

    Loveland, Elaina

    2017-01-01

    Generation Z students (born between 1995-2010) have replaced millennials on college campuses. Generation Z students are entrepreneurial, desire practical skills with their education, and are concerned about the cost of college. This article presents what need to be known about this new generation of students.

  20. Isotope generator

    International Nuclear Information System (INIS)

    1979-01-01

    The patent describes an isotope generator incorporating the possibility of stopping elution before the elution vessel is completely full. Sterile ventilation of the whole system can then occur, including of both generator reservoir and elution vessel. A sterile, and therefore pharmaceutically acceptable, elution fluid is thus obtained and the interior of the generator is not polluted with non-sterile air. (T.P.)

  1. Choreographic Programming

    DEFF Research Database (Denmark)

    Montesi, Fabrizio

    , as they offer a concise view of the message flows enacted by a system. For this reason, in the last decade choreographies have been used in the development of programming languages, giving rise to a programming paradigm that in this dissertation we refer to as Choreographic Programming. Recent studies show...... with a type checker for verifying their correctness based on our formal development. Programs in Chor can be compiled to executable endpoint code in Jolie, a language for distributed programming. We use Chor for evaluating choreographic programming against a series of use cases....... endpoint described in a choreography can then be automatically generated, ensuring that such implementations are safe by construction. However, current formal models for choreographies do not deal with critical aspects of distributed programming, such as asynchrony, mobility, modularity, and multiparty...

  2. Investigation of Advanced Counterrotation Blade Configuration Concepts for High Speed Turboprop Systems. Task 3: Advanced Fan Section Grid Generator Final Report and Computer Program User's Manual

    Science.gov (United States)

    Crook, Andrew J.; Delaney, Robert A.

    1991-01-01

    A procedure is studied for generating three-dimensional grids for advanced turbofan engine fan section geometries. The procedure constructs a discrete mesh about engine sections containing the fan stage, an arbitrary number of axisymmetric radial flow splitters, a booster stage, and a bifurcated core/bypass flow duct with guide vanes. The mesh is an h-type grid system, the points being distributed with a transfinite interpolation scheme with axial and radial spacing being user specified. Elliptic smoothing of the grid in the meridional plane is a post-process option. The grid generation scheme is consistent with aerodynamic analyses utilizing the average-passage equation system developed by Dr. John Adamczyk of NASA Lewis. This flow solution scheme requires a series of blade specific grids each having a common axisymmetric mesh, but varying in the circumferential direction according to the geometry of the specific blade row.

  3. TRAP2: FORTRAN program for digital simulation of the transient behavior of the once-through steam generator and associated reactor coolant system

    International Nuclear Information System (INIS)

    Cudlin, J.J.; Daggett, P.W.

    1976-08-01

    The TRAP2 code calculates the transient response of the once-through steam generator and associated reactor coolant system to feedwater and main steam line pipe ruptures. The numerical integrations are made serially by a combination of forward differencing and implicit techniques. Fluid properties are obtained from equations that are surface fits to the 1967 ASME Steam Tables. Unusual features include multiple time-step analysis, restart capability, and plot capability

  4. Generation of Murine Cardiac Pacemaker Cell Aggregates Based on ES-Cell-Programming in Combination with Myh6-Promoter-Selection

    Science.gov (United States)

    Rimmbach, Christian; Jung, Julia J.; David, Robert

    2015-01-01

    Treatment of the “sick sinus syndrome” is based on artificial pacemakers. These bear hazards such as battery failure and infections. Moreover, they lack hormone responsiveness and the overall procedure is cost-intensive. “Biological pacemakers” generated from PSCs may become an alternative, yet the typical content of pacemaker cells in Embryoid Bodies (EBs) is extremely low. The described protocol combines “forward programming” of murine PSCs via the sinus node inducer TBX3 with Myh6-promoter based antibiotic selection. This yields cardiomyocyte aggregates consistent of >80% physiologically functional pacemaker cells. These “induced-sinoatrial-bodies” (“iSABs”) are spontaneously contracting at yet unreached frequencies (400-500 bpm) corresponding to nodal cells isolated from mouse hearts and are able to pace murine myocardium ex vivo. Using the described protocol highly pure sinus nodal single cells can be generated which e.g. can be used for in vitro drug testing. Furthermore, the iSABs generated according to this protocol may become a crucial step towards heart tissue engineering. PMID:25742394

  5. Interactive DIF Generator

    Science.gov (United States)

    Preheim, Larry E.; Amy, Laraine; Young, Jimmie D.

    1993-01-01

    Interactive DIF Generator (IDG) computer program serves as utility to generate and manipulate directory interchange format (DIF) files. Creates and updates DIF files, sent to NASA's Master Directory, also referred to as International Global Change Directory at Goddard Space Flight Center. Many government and university data systems use Master Directory to advertise availability of research data. IDG is interactive software tool and requires mouse or trackball to operate. Written in C language.

  6. WheelerLab: An interactive program for sequence stratigraphic analysis of seismic sections, outcrops and well sections and the generation of chronostratigraphic sections and dynamic chronostratigraphic sections

    OpenAIRE

    Adewale Amosu; Yuefeng Sun

    2017-01-01

    WheelerLab is an interactive program that facilitates the interpretation of stratigraphic data (seismic sections, outcrop data and well sections) within a sequence stratigraphic framework and the subsequent transformation of the data into the chronostratigraphic domain. The transformation enables the identification of significant geological features, particularly erosional and non-depositional features that are not obvious in the original seismic domain. Although there are some software produ...

  7. A new generation in computing

    International Nuclear Information System (INIS)

    Kahn, R.E.

    1983-01-01

    Fifth generation of computers is described. The three disciplines involved in bringing such a new generation to reality are: microelectronics; artificial intelligence and, computer systems and architecture. Applications in industry, offices, aerospace, education, health care and retailing are outlined. An analysis is given of research efforts in the US, Japan, U.K., and Europe. Fifth generation programming languages are detailed

  8. Employment and income generation within the framework of the 'Luz para todos' program in the State of Amazonas, Brazil; Geracao de emprego e renda no ambito do programa Luz para Todos no estado do Amazonas

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Rubem Cesar Rodrigues; Moraes, Betsy Eddy Praia; Souza, Cristiane Daliassi Ramos de [Universidade Federal do Amazonas (UFAM), Manaus, AM (Brazil). Centro de Desenvolvimento Energetico Amazonico

    2008-07-01

    The low level of the electric demand to be accomplished in the isolated Amazon communities, associated to the low purchasing power of those populations and the high costs for electrification of these, they impose the implementation of concrete actions of generation of job and income when it intend to assure the universalization of the electric power service in isolated Amazon communities, as ir the case of the program 'Luz para Todos'. The present article shows that is being developed by the committee state manager of the program 'Luz para Todos' in the amazon state, demonstrating that it is possible to assure good results since the effective involvement of several agents is made possible. (author)

  9. Nuclear as the sixth-fuel diversification policy for the electricity generation program in Malaysia : a way forward (using the message case study)

    International Nuclear Information System (INIS)

    Sulaiman, Shamsul Amri

    2009-02-01

    A study of the long-term electricity demand using multiple technologies and anticipated CO 2 emissions for the Malaysia power sector was conducted for a period between 2008 and 2030. The IAEA's user-friendly energy planning tool, MESSAGE-V, was employed in this study due to its flexibility in establishing a model for a power system in the quest for optimum total installed capacity and generation mix expansion path consonant with user-defined constraints in the intermediate to long-term period. This paper demonstrates the necessity for Malaysia to gazette nuclear as its newly proposed Sixth-Fuel Diversification Policy, which is a replacement for the current Five-Fuel Diversification Policy, as part of the national strategic approach for ensuring fuel supply security, sustainability and availability. Using the model developed in this study, many possible future scenarios ranging from business-as-usual or base-case to incorporation of nuclear power plants under many assumptions, bounds and restrictions were simulated, analyzed and compared. The forecasted total installed capacity, generation mix, objective function (total discounted energy system cost) and projected CO 2 emissions were computed, plotted, tabled and discussed for each scenario. It was discovered that the nuclear generating option was indeed attractive and played active role in the MESSAGE optimization process for most of the scenarios, excluding scenarios in which nuclear power was intentionally made absent. Based on the findings of this study and some other pertinent points, the importance of incorporated nuclear energy as a strategic and essential part of Malaysia's future energy policy was discussed with emphasis on the problems faced by the existing fuels in meeting the requirement of a sustainable long term energy security as well as compliance with anticipated future environmental obligations for Malaysia's post Kyoto Protocol 2012 regime

  10. Addressing challenges of training a new generation of clinician-innovators through an interdisciplinary medical technology design program: Bench-to-Bedside.

    Science.gov (United States)

    Loftus, Patrick D; Elder, Craig T; D'Ambrosio, Troy; Langell, John T

    2015-01-01

    Graduate medical education has traditionally focused on training future physicians to be outstanding clinicians with basic and clinical science research skills. This focus has resulted in substantial knowledge gains, but a modest return on investment based on direct improvements in clinical care. In today's shifting healthcare landscape, a number of important challenges must be overcome to not only improve the delivery of healthcare, but to prepare future physicians to think outside the box, focus on and create healthcare innovations, and navigate the complex legal, business and regulatory hurdles of bringing innovation to the bedside. We created an interdisciplinary and experiential medical technology design competition to address these challenges and train medical students interested in moving new and innovative clinical solutions to the forefront of medicine. Medical students were partnered with business, law, design and engineering students to form interdisciplinary teams focused on developing solutions to unmet clinical needs. Over the course of six months teams were provided access to clinical and industry mentors, $500 prototyping funds, development facilities, and non-mandatory didactic lectures in ideation, design, intellectual property, FDA regulatory requirements, prototyping, market analysis, business plan development and capital acquisition. After four years of implementation, the program has supported 396 participants, seen the development of 91 novel medical devices, and launched the formation of 24 new companies. From our perspective, medical education programs that develop innovation training programs and shift incentives from purely traditional basic and clinical science research to also include high-risk innovation will see increased student engagement in improving healthcare delivery and an increase in the quality and quantity of innovative solutions to medical problems being brought to market.

  11. Design and construction of nuclear power plants for export. Adaptation of a reference plant from a series in a national power generating program

    International Nuclear Information System (INIS)

    Marcaillou, J.; Haond, H.

    1977-01-01

    The recent evolution of primary energy supplies places those countries having a nuclear industry in an exporting role. Exporting countries have generally developed a limited number of national reactor types and attempt to extend their manufacture with as few changes as possible. The E.D.F. in France is implementing an important PWR 900 MW program based on FRAMATOME nuclear reactors, initially conceived by WESTINGHOUSE. Such standardization poses certain problems for the importing countries. These problems and ways in which they can be solved are discussed [fr

  12. Organotin speciation in environmental matrices by automated on-line hydride generation-programmed temperature vaporization-capillary gas chromatography-mass spectrometry detection.

    Science.gov (United States)

    Serra, H; Nogueira, J M F

    2005-11-11

    In the present contribution, a new automated on-line hydride generation methodology was developed for dibutyltin and tributyltin speciation at the trace level, using a programmable temperature-vaporizing inlet followed by capillary gas chromatography coupled to mass spectrometry in the selected ion-monitoring mode acquisition (PTV-GC/MS(SIM)). The methodology involves a sequence defined by two running methods, the first one configured for hydride generation with sodium tetrahydroborate as derivatising agent and the second configured for speciation purposes, using a conventional autosampler and data acquisition controlled by the instrument's software. From the method-development experiments, it had been established that injector configuration has a great effect on the speciation of the actual methodology, particularly, the initial inlet temperature (-20 degrees C; He: 150 ml/min), injection volume (2 microl) and solvent characteristics using the solvent venting mode. Under optimized conditions, a remarkable instrumental performance including very good precision (RSD CRM 462, Nr. 330 dibutyltin: 68+/-12 ng/g; tributyltin: 54+/-15 ng/g on dry mass basis), using liquid-liquid extraction (LLE) and solid-phase extraction (SPE) sample enrichment and multiple injections (2 x 5 microl) for sensitivity enhancement. The methodology evidenced high reproducibility, is easy to work-up, sensitive and showed to be a suitable alternative to replace the currently dedicated analytical systems for organotin speciation in environmental matrices at the trace level.

  13. Development and verification of a program system for spectrum generation and evaluation of weighted group constants for thermal and epithermal nuclear fuel systems

    International Nuclear Information System (INIS)

    Arshad, M.

    1986-04-01

    The program is based on a combination of the first collision theory and the Bsub(n)-approximation to the neutron transport equation and is well suited for the thermal and epithermal lattices. The treatment of the resolved and unresolved resonances has been improved to incorporate the sigmasub(o)-dependence of the cross sections and the lattice cell heterogenities. The improved treatment of the resonance absorption enables to compute the assemblies containing ceramic as well as metallic fuels with a large variety of fuel to moderator ratios. Several experimental benchmarks have been computed using this program and the effective multiplication factors as well as the reaction rates lie very close to the experimental results. It has been shown that neither the sigma 0 -method (without one dimensional cell calculations) nor the one dimensional calculations (with cross sections independent of sigmasub(o)) alone can be used for the entire resonance energy range. Based on the results of the benchmark calculations a combination of both methods is proposed. (orig./HP) [de

  14. SNAP-21 program, Phase II. Deep sea radioisotope-fueled thermoelectric generator power supply system. Final design description, 10-watt system

    Energy Technology Data Exchange (ETDEWEB)

    Wickenberg, R.F.; Harris, W.W.

    1969-10-01

    The SNAP-21 10-W system provides electrical power for use under the surface of the sea. It functions by converting the heat from a decaying radioisotope fuel into useful electrical energy. This heat energy is converted into electrical energy by a thermoelectric generator. Semiconductor-type thermoelectric materials, maintained in a temperature gradient, accomplish the conversion. The isotopic fuel supplies heat to the thermoelectric materials and sea water acts as the heat sink to maintain the temperature gradient. Other components are employed to increase efficiency and condition the electrical output to the desired form. The components performing these functions are enclosed in a pressure vessel which protects them from sea water pressure and exposure. No external inputs are required to maintain operation of the system. With this type of mechanically-static, unsupported operation, long life with no maintenance is achieved.

  15. Model test setup and program for experimental estimation of surface loads of the SSG Kvitsoey pilot plant from extreme wave conditions[Seawave Slot-cone Generators

    Energy Technology Data Exchange (ETDEWEB)

    Juul Larsen, B.; Kofoed, J.P.

    2005-10-15

    The purpose of the tests is to find the wave induced surface loads on the SSG pilot plant when exposed to extreme wave conditions, ie. the design loads. The design sea states used in the model tests are found through a study of the wave climate from a number of different sources, as described in chapter 2. Based on the hereby obtained extreme wave data for the SSG pilot plant location a test program has been designed to establish the surface loads on the SSG pilot plant in various relevant sea states, see chapter 3. A description of the test setup and the model is made in detail including a description of the instrumentation and data acquisition and also the data analysis. (au)

  16. Vital to future generations. The Bali Conference has recommended that 4% of all official development assistance be earmarked for population programs.

    Science.gov (United States)

    Ward, R

    1993-03-01

    The Fourth Asian and Pacific Population Conference organized by the United Nations Economic and Social Commission for Asia and the Pacific (ESCAP) and the United Nations Population Fund (UNFPA) was held in Bali, Indonesia, in August 1992. The highlights included: sustainable population and economic growth in a region with three-fifths of the world's population; the threat to the environment from the consumption of natural resources; high fertility; high dependency ratios and aging; land degradation; and migration. The Director of UNFPA revealed that the average rate of population growth had fallen to 1.7% annually since 1963, but an estimated 17.7 million persons were still being added to the region each year. The Conference urged improvement in reproductive health care to reduce maternal illness and death and the spread of sexually transmitted diseases, especially AIDS, and women-centered programs. Both long- and short-term rural-to-urban and international migration affects the development dynamic. The Conference viewed urbanization as inevitable, but cautioned against neglect of rural development. Improving the status of women through education will help reduce discrimination. The success of family planning efforts in the region is attributable to the changing behavior of women, age at marriage, and the number and spacing of children. 86% of the developing world's elderly will reside in Asia by the year 2000. The Conference recommended economic incentives and tax exemptions to assist families caring for older relatives, but stopped short of pension plans and social security systems. Mortality, however, may be reduced by increasing HIV infection and AIDS prevention. Poverty alleviation figured among agenda items. Robert McNamara noted in a 1991 address that over 1 million people suffer from hunger and over 900 million remain illiterate worldwide. To counter this, education, nutrition, and health services for the poor are needed; also needed are human resources

  17. Generative Semantics.

    Science.gov (United States)

    King, Margaret

    The first section of this paper deals with the attempts within the framework of transformational grammar to make semantics a systematic part of linguistic description, and outlines the characteristics of the generative semantics position. The second section takes a critical look at generative semantics in its later manifestations, and makes a case…

  18. Generative collectives

    NARCIS (Netherlands)

    van Osch, W.; Avital, M.; Sabherwal, R.; Sumner, M.

    2010-01-01

    Analyzing generative group activities against the backdrop of an increasingly connected world, this theory development paper introduces the concept of "generative collectives" as a new framework for classifying internet-based collectives and a novel theoretical lens for explaining why some

  19. Generational Phenomenology

    African Journals Online (AJOL)

    denise

    by Xers, and how Millennials not only accept but expect diversity (320 ff.). However, nothing is actually said to the effect that generational relations might be affected by the different styles of thinking, speaking, and values of women. Moreover, it seems likely that generations and their relations are different for people of color,.

  20. Sound generator

    NARCIS (Netherlands)

    Berkhoff, Arthur P.

    2008-01-01

    A sound generator, particularly a loudspeaker, configured to emit sound, comprising a rigid element (2) enclosing a plurality of air compartments (3), wherein the rigid element (2) has a back side (B) comprising apertures (4), and a front side (F) that is closed, wherein the generator is provided

  1. Sound generator

    NARCIS (Netherlands)

    Berkhoff, Arthur P.

    2010-01-01

    A sound generator, particularly a loudspeaker, configured to emit sound, comprising a rigid element (2) enclosing a plurality of air compartments (3), wherein the rigid element (2) has a back side (B) comprising apertures (4), and a front side (F) that is closed, wherein the generator is provided

  2. Pulse Generator

    Science.gov (United States)

    Greer, Lawrence (Inventor)

    2017-01-01

    An apparatus and a computer-implemented method for generating pulses synchronized to a rising edge of a tachometer signal from rotating machinery are disclosed. For example, in one embodiment, a pulse state machine may be configured to generate a plurality of pulses, and a period state machine may be configured to determine a period for each of the plurality of pulses.

  3. Sound generator

    NARCIS (Netherlands)

    Berkhoff, Arthur P.

    2007-01-01

    A sound generator, particularly a loudspeaker, configured to emit sound, comprising a rigid element (2) enclosing a plurality of air compartments (3), wherein the rigid element (2) has a back side (B) comprising apertures (4), and a front side (F) that is closed, wherein the generator is provided

  4. Future Generations

    Centers for Disease Control (CDC) Podcasts

    2007-11-01

    This podcast gives action steps and reasons to control diabetes, with a focus on American Indians.  Created: 11/1/2007 by National Diabetes Education Program (NDEP), a joint program of the Centers for Disease Control and Prevention and the National Institutes of Health.   Date Released: 11/4/2007.

  5. Error free physically unclonable function with programmed resistive random access memory using reliable resistance states by specific identification-generation method

    Science.gov (United States)

    Tseng, Po-Hao; Hsu, Kai-Chieh; Lin, Yu-Yu; Lee, Feng-Min; Lee, Ming-Hsiu; Lung, Hsiang-Lan; Hsieh, Kuang-Yeu; Chung Wang, Keh; Lu, Chih-Yuan

    2018-04-01

    A high performance physically unclonable function (PUF) implemented with WO3 resistive random access memory (ReRAM) is presented in this paper. This robust ReRAM-PUF can eliminated bit flipping problem at very high temperature (up to 250 °C) due to plentiful read margin by using initial resistance state and set resistance state. It is also promised 10 years retention at the temperature range of 210 °C. These two stable resistance states enable stable operation at automotive environments from -40 to 125 °C without need of temperature compensation circuit. The high uniqueness of PUF can be achieved by implementing a proposed identification (ID)-generation method. Optimized forming condition can move 50% of the cells to low resistance state and the remaining 50% remain at initial high resistance state. The inter- and intra-PUF evaluations with unlimited separation of hamming distance (HD) are successfully demonstrated even under the corner condition. The number of reproduction was measured to exceed 107 times with 0% bit error rate (BER) at read voltage from 0.4 to 0.7 V.

  6. Dynamic programming for reduction of fuel consumption in a photovoltaic/wind/diesel generating system; Doteki keikakuho ni yoru taiyoko/furyoku/diesel hatsuden system no nenryo shohiryo no sakugen

    Energy Technology Data Exchange (ETDEWEB)

    Ishikawa, K.; Kenmoku, Y.; Sakakibara, T. [Toyohashi University of Technology, Aichi (Japan); Nakagawa, S. [Maizuru National College of Technology, Kyoto (Japan); Kawamoto, T. [Shizuoka University, Shizuoka (Japan)

    1997-11-25

    Dynamic programming is employed in the study of the operation of the diesel engine in a photovoltaic/wind-force/diesel-engine power generating system, which aims at reduction in the system fuel consumption and at determining an optimum system constitution. The parameters set in this system are the photovoltaic/wind-force supply rate, photovoltaic/wind-force power generation ratio, and battery capacity. An island in Ise Bay, with an annual load power of approximately 1.59-million kWh and mean daily load power of approximately 4336kWh is assumed as the location for the system. Observation data of Ommaezaki Weather Station are utilized for the calculation of the amount of photovoltaic/wind-force power generation. It is found as the result that the fuel consumption of the diesel engine in this system decreases to 82-84% when the natural energy supply rate is 20%. It is also found that the fuel consumption of the system records the minimum at a photovoltaic/wind-force ratio of 60/40, irrespective of the battery capacity or natural energy supply rate, and this ratio is the optimum ratio. 3 refs., 9 figs., 1 tab.

  7. Performance of second generation 10-watt Stirling generator set

    International Nuclear Information System (INIS)

    Ross, B.; Ritter, D.

    1994-01-01

    The purpose of the Radioisotope Stirling Generator (RSG) development program is to devise a generator that produces at least 10 watts of DC power continuously with 58 to 60 watts of thermal input from a radioisotope. The first generation, or laboratory version, of a 10 watt Stirling generator set was described in previous IECEC proceedings. The second generation version of the generator set has been built and tested. The significant changes include the implementation of vacuum foil insulation with a much smaller volume, hermetic sealing, and elimination of most of the diagnostic instrumentation used for laboratory development. This paper describes the performance and operating characteristics of the second generation machine and compares it to the first generation machine. Endurance testing of the first generation machine and key components is also described

  8. Demystifying PhDs: a review of doctorate programs designed to fulfil the needs of the next generation of nursing professionals.

    Science.gov (United States)

    Cleary, Michelle; Hunt, Glenn E; Jackson, Debra

    2011-10-01

    Commonly, the expression 'PhD' evokes a level of trepidation amongst potential candidates from both the clinical and academic spheres. In contemporary settings, a Doctor of Philosophy is highly regarded and increasingly necessary for a successful academic nursing career. The aim of this paper is to explore the options for doctoral education for nurses, and consider the role of the doctorate in career planning for nursing, and in the attainment of career goals. Here we discuss some key issues and practicalities including career planning, selecting a doctoral program, choosing a university, supervision, committees and panels, achieving a work-life balance and dealing with conflict. The PhD process should be an enriching and satisfying experience which may lead to enhanced professional and personal growth; however, there are potential pitfalls that nurses should be aware of before embarking on doctoral training. Future studies are needed to assess the impact of the different doctorates offered to see if, in fact, they are advancing nursing practice and research endeavours.

  9. Flywheel Generator

    OpenAIRE

    Yuniarsih, Pratitis; Bachtiyar, Fahmi; Rosyidin, Mufti; Prabawanto, Trisakti

    2014-01-01

    Lately, the needs of energy is increasing but its availability is very limited. Therefore,it is important to do more research on energy reform. Generator is one of the alternative energy which commonly used by the public, but it has a minus value such as the voltage instability and low efficiency of the generator . Based on those issues,so we made an application flywheel in electrical generator, which aims to produce a concept of power efficiency increase, stabilize the output voltage of the ...

  10. French plutonium management program

    International Nuclear Information System (INIS)

    Greneche, D.

    2002-01-01

    The French plutonium management program is summarized in this paper. The program considers nuclear generation as a major component of national electric power supply and includes the reprocessing of the spent fuel. (author)

  11. Financing Distributed Generation

    Energy Technology Data Exchange (ETDEWEB)

    Walker, A.

    2001-06-29

    This paper introduces the engineer who is undertaking distributed generation projects to a wide range of financing options. Distributed generation systems (such as internal combustion engines, small gas turbines, fuel cells and photovoltaics) all require an initial investment, which is recovered over time through revenues or savings. An understanding of the cost of capital and financing structures helps the engineer develop realistic expectations and not be offended by the common requirements of financing organizations. This paper discusses several mechanisms for financing distributed generation projects: appropriations; debt (commercial bank loan); mortgage; home equity loan; limited partnership; vendor financing; general obligation bond; revenue bond; lease; Energy Savings Performance Contract; utility programs; chauffage (end-use purchase); and grants. The paper also discusses financial strategies for businesses focusing on distributed generation: venture capital; informal investors (''business angels''); bank and debt financing; and the stock market.

  12. Financing Distributed Generation

    International Nuclear Information System (INIS)

    Walker, A.

    2001-01-01

    This paper introduces the engineer who is undertaking distributed generation projects to a wide range of financing options. Distributed generation systems (such as internal combustion engines, small gas turbines, fuel cells and photovoltaics) all require an initial investment, which is recovered over time through revenues or savings. An understanding of the cost of capital and financing structures helps the engineer develop realistic expectations and not be offended by the common requirements of financing organizations. This paper discusses several mechanisms for financing distributed generation projects: appropriations; debt (commercial bank loan); mortgage; home equity loan; limited partnership; vendor financing; general obligation bond; revenue bond; lease; Energy Savings Performance Contract; utility programs; chauffage (end-use purchase); and grants. The paper also discusses financial strategies for businesses focusing on distributed generation: venture capital; informal investors (''business angels''); bank and debt financing; and the stock market

  13. Steam generator thermal-hydraulics

    International Nuclear Information System (INIS)

    Inch, W.W.; Scott, D.A.; Carver, M.B.

    1980-01-01

    This paper discusses a code for detailed numerical modelling of steam generator thermal-hydraulics, and describes related experimental programs designed to promote in-depth understanding of three-dimensional two-phase flow. (auth)

  14. Steam generator reliability improvement project

    International Nuclear Information System (INIS)

    Blomgren, J.C.; Green, S.J.

    1987-01-01

    Upon successful completion of its research and development technology transfer program, the Electric Power Research Institute's Steam Generator Owners Group (SGOG II) will disband in December 1986 and be replaced in January 1987 by a successor project, the Steam Generator Reliability Project (SGRP). The new project, funded in the EPRI base program, will continue the emphasis on reliability and life extension that was carried forward by SGOG II. The objectives of SGOG II have been met. Causes and remedies have been identified for tubing corrosion problems, such as stress corrosion cracking and pitting, and steam generator technology has been improved in areas such as tube wear prediction and nondestructive evaluation (NDE). These actions have led to improved reliability of steam generators. Now the owners want to continue with a centrally managed program that builds on what has been learned. The goal is to continue to improve steam generator reliability and solve small problems before they become large problems

  15. Steam generator reliability improvement project

    International Nuclear Information System (INIS)

    Blomgren, J.C.; Green, S.J.

    1987-01-01

    Upon successful completion of its research and development technology transfer program, the Electric Power Research Institute's (EPRI's) Steam Generator Owners Group (SGOG II) will disband in December 1986, and be replaced in January 1987, by a successor project, the Steam Generator Reliability Project (SGRP). The new project, funded in the EPRI base program, will continue to emphasize reliability and life extension, which were carried forward by SGOG II. The objectives of SGOG II have been met. Causes and remedies have been identified for tubing corrosion problems such as stress corrosion cracking and pitting, and steam generator technology has been improved in areas such as tube wear prediction and nondestructive evaluation. These actions have led to improved reliability of steam generators. Now the owners want to continue with a centrally managed program that builds on what has been learned. The goal is to continue to improve steam generator reliability and to solve small problems before they become large problems

  16. A new vision of the post-NIST civil infrastructure program: the challenges of next-generation construction materials and processes

    Science.gov (United States)

    Wu, H. Felix; Wan, Yan

    2014-03-01

    , security, and safety of elements of critical infrastructure for the Nation's already deteriorating civil infrastructure. It is envisioned that the Nation should look far beyond: not only should we efficiently and effectively address current problems of the aging infrastructure, but we must also further develop next-generation construction materials and processes for new construction. To accomplish this ambitious goal, we must include process efficiency that will help select the most reliable and cost-effective materials in construction processes; performance and cost will be the prime consideration for selections construction materials based on life-cycle cost and materials performance; energy efficiency will drive reduced energy consumption from current levels by 50 % per unit of output; and environmental responsiveness will achieve net-zero waste from construction materials and its constituents. Should it be successfully implemented, we will transform the current 21st century infrastructure systems to enable the vital functioning of society and improve competitiveness of the economy to ensure that our quality of life remains high.

  17. PULSE GENERATOR

    Science.gov (United States)

    Roeschke, C.W.

    1957-09-24

    An improvement in pulse generators is described by which there are produced pulses of a duration from about 1 to 10 microseconds with a truly flat top and extremely rapid rise and fall. The pulses are produced by triggering from a separate input or by modifying the current to operate as a free-running pulse generator. In its broad aspect, the disclosed pulse generator comprises a first tube with an anode capacitor and grid circuit which controls the firing; a second tube series connected in the cathode circuit of the first tube such that discharge of the first tube places a voltage across it as the leading edge of the desired pulse; and an integrator circuit from the plate across the grid of the second tube to control the discharge time of the second tube, determining the pulse length.

  18. Next generation vaccines.

    Science.gov (United States)

    Riedmann, Eva M

    2011-07-01

    In February this year, about 100 delegates gathered for three days in Vienna (Austria) for the Next Generation Vaccines conference. The meeting held in the Vienna Hilton Hotel from 23rd-25th February 2011 had a strong focus on biotech and industry. The conference organizer Jacob Fleming managed to put together a versatile program ranging from the future generation of vaccines to manufacturing, vaccine distribution and delivery, to regulatory and public health issues. Carefully selected top industry experts presented first-hand experience and shared solutions for overcoming the latest challenges in the field of vaccinology. The program also included several case study presentations on novel vaccine candidates in different stages of development. An interactive pre-conference workshop as well as interactive panel discussions during the meeting allowed all delegates to gain new knowledge and become involved in lively discussions on timely, interesting and sometimes controversial topics related to vaccines.

  19. Pulse power applications of flux compression generators

    International Nuclear Information System (INIS)

    Fowler, C.M.; Caird, R.S.; Erickson, D.J.; Freeman, B.L.

    1981-01-01

    Characteristics are presented for two different types of explosive driven flux compression generators and a megavolt pulse transformer. Status reports are given for rail gun and plasma focus programs for which the generators serve as power sources

  20. Practical testing of diesel generators

    International Nuclear Information System (INIS)

    Angle, C.W.; Meyer, S.P.

    1985-01-01

    The testing of diesel generators is a very important facet of the safe operation of nuclear power plants. Improper testing can lead to increased failures and unavailability of the engines resulting in a reduced safety factor for a nuclear plant. For a testing program to be successful it must be well planned and effectively implemented. In addition, inspections and maintenance activities also impact diesel generator availability. This paper describes elements of a suggested diesel generator testing program as well as some of the pitfalls to be avoided

  1. Instrumentation and Baseband Telemetry for RLV-TD HEX Mission

    Science.gov (United States)

    Jose, Smitha; Varghese, Bibin; Chauhan, Akshay; Elizabeth, Sheba; Sreelal, S.; Sreekumar, S.; Vinod, P.; Mookiah, T.

    2017-12-01

    In this work, the salient requirements and features of the baseband telemetry system used in Reusable Launch Vehicle—Technology Demonstrator Hypersonic Experiment mission are discussed. The configuration of the overall system, subsystem components and their features are described in brief. The unique requirements of the telemetry system, when compared to that in a conventional launch vehicle, by way of a large number of temperature and strain measurements that enable the assessment of structural integrity and mission performance in re-entry mission, are dealt with, along with the system configuration to cater to these. Subsequently, two new units have been described—Strain Data Acquisition Unit and Multiplexed Data Acquisition Unit that were inducted specifically to cater to strain measurements using strain gauges and temperature measurements using thermocouples respectively. The optimized subsystem configurations for these units are described and their field performance during flight is analyzed. This work further discusses a novel method of data recovery for those measurements affected by the baseline offset shift caused by the presence of a chassis voltage and poor isolation of sensor to chassis.

  2. Integration of health management and support systems is key to achieving cost reduction and operational concept goals of the 2nd generation reusable launch vehicle

    Science.gov (United States)

    Koon, Phillip L.; Greene, Scott

    2002-07-01

    Our aerospace customers are demanding that we drastically reduce the cost of operating and supporting our products. Our space customer in particular is looking for the next generation of reusable launch vehicle systems to support more aircraft like operation. To achieve this goal requires more than an evolution in materials, processes and systems, what is required is a paradigm shift in the design of the launch vehicles and the processing systems that support the launch vehicles. This paper describes the Automated Informed Maintenance System (AIM) we are developing for NASA's Space Launch Initiative (SLI) Second Generation Reusable Launch Vehicle (RLV). Our system includes an Integrated Health Management (IHM) system for the launch vehicles and ground support systems, which features model based diagnostics and prognostics. Health Management data is used by our AIM decision support and process aids to automatically plan maintenance, generate work orders and schedule maintenance activities along with the resources required to execute these processes. Our system will automate the ground processing for a spaceport handling multiple RLVs executing multiple missions. To accomplish this task we are applying the latest web based distributed computing technologies and application development techniques.

  3. Generation Y Perspectives

    Science.gov (United States)

    Fitzpatrick, Garret; Painting, Kristen; Barrera, Aaron; Skytland, Nick

    2008-01-01

    Are you familiar with the famed Generation Y, or "Gen Yers?" Generation Y is projected to be 47 percent of the workforce by 2014. They were born roughly between 1977 and 2000, but that is definitely not their only defining factor. But who is this group, and what do they have to do with the future of the space program and the Johnson Space Center (JSC)? During 2007, a group of Gen Yers at JSC participated on a committee to address the NASA Headquarters strategic communications plan. Fitzpatrick, along with his co-authors, created a presentation to share the Gen Yers' perspective on their generation in conjunction with the strategic communications strategy released. This knowledge capture (KC) event is that presentation.

  4. Cluster generator

    Science.gov (United States)

    Donchev, Todor I [Urbana, IL; Petrov, Ivan G [Champaign, IL

    2011-05-31

    Described herein is an apparatus and a method for producing atom clusters based on a gas discharge within a hollow cathode. The hollow cathode includes one or more walls. The one or more walls define a sputtering chamber within the hollow cathode and include a material to be sputtered. A hollow anode is positioned at an end of the sputtering chamber, and atom clusters are formed when a gas discharge is generated between the hollow anode and the hollow cathode.

  5. Multiobjective programming and planning

    CERN Document Server

    Cohon, Jared L

    2004-01-01

    This text takes a broad view of multiobjective programming, emphasizing the methods most useful for continuous problems. It reviews multiobjective programming methods in the context of public decision-making problems, developing each problem within a context that addresses practical aspects of planning issues. Topics include a review of linear programming, the formulation of the general multiobjective programming problem, classification of multiobjective programming methods, techniques for generating noninferior solutions, multiple-decision-making methods, multiobjective analysis of water reso

  6. Precursor to the TRICARE Next Generation Program

    Science.gov (United States)

    2004-06-01

    tomorrow, and en el futuro ” (San Antonio Metro Health District, 2002, n.p.) Additionally, community values were identified to assist personnel in the...provide access to Mexico in the south and Canada in the north. International trade, as a result of the North American Free Trade Agreement, is...expanding into the local area. Two- thirds of all trade between the US and Mexico is moved through the San Antonio area on one of its many interstate

  7. ICD programming

    OpenAIRE

    Biffi, Mauro

    2014-01-01

    Background: Appropriate ICD programming is the key to prevent inappropriate shock delivery, that is closely associated to a negative patients' outcome. Methods: Review of the literature on ICD therapy to generate ICD programmings that can be applied to the broad population of ICD and CRT-D carriers. Results: Arrhythmia detection should occur with a detection time ranging 9″–12″ in the VF zone, and 15″–60″ in the VT zone. Discriminator should be applied at least up to 200 bpm. ATP therap...

  8. Magnet Free Generators - 3rd Generation Wind Turbine Generators

    DEFF Research Database (Denmark)

    Jensen, Bogi Bech; Mijatovic, Nenad; Henriksen, Matthew Lee

    2013-01-01

    This paper presents an introduction to superconducting wind turbine generators, which are often referred to as 3rd generation wind turbine generators. Advantages and challenges of superconducting generators are presented with particular focus on possible weight and efficiency improvements. A comp....... A comparison of the rare earth usage in different topologies of permanent magnet generators and superconducting generators is also presented....

  9. Report on achievements in fiscal 1999. Development of technology to put photovoltaic power generation system into practical use by international cooperation project (Executive Committee meetings for treaty of executing IEA photovoltaic power generation system research cooperation program - IEA/PVPS); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu. Kokusai kyoryoku jigyo (IEA taiyoko hatsuden system kenkyu kyoryoku program jisshi kyotei (shikko iinkai))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The 13th and 14th Executive Committee meetings were held. The resolutions adopted at the 13th Executive Committee meeting (Lausanne, Switzerland, May 3 through 5, 1999) were the approval of the Task VIII as a new IEA/PVPS task, the feasibility study on large scale photovoltaic power generation utilizing unused land such as desert (the operating agent country being Japan headed by Mr. Kando, chief researcher at NEDO and Professor Kurokawa) and the Task IX, proliferation of photovoltaic power generation under coordination with developing countries (the operating agent country being England headed by Mr. Bernard McNelis (IT Power) and that the task I operating agent country is substituted jointly by the three countries of Australia, Holland and Switzerland for six months. The resolutions adopted at the 14th Executive Committee meeting (Oslo, Norway, October 18 through 20, 1999) were appointing Australia as the Task I operating agent country headed by Mr. G. Watt, setting a web site of IEA/PVPS, issuing the annual report for fiscal 1998 in early 2000, and holding the Executive Committee meetings for fiscal 2000 in Canada (Quebec, April 17 through 19, 2000), and Italy (October 16 through 18, 2000). (NEDO)

  10. MAGNETOHYDRODYNAMIC EQUATIONS (MHD GENERATION CODE

    Directory of Open Access Journals (Sweden)

    Francisco Frutos Alfaro

    2017-04-01

    Full Text Available A program to generate codes in Fortran and C of the full magnetohydrodynamic equations is shown. The program uses the free computer algebra system software REDUCE. This software has a package called EXCALC, which is an exterior calculus program. The advantage of this program is that it can be modified to include another complex metric or spacetime. The output of this program is modified by means of a LINUX script which creates a new REDUCE program to manipulate the magnetohydrodynamic equations to obtain a code that can be used as a seed for a magnetohydrodynamic code for numerical applications. As an example, we present part of the output of our programs for Cartesian coordinates and how to do the discretization.

  11. Young generation actions in Finland

    International Nuclear Information System (INIS)

    Tanskanen, A.

    2000-01-01

    The Finnish Young Generation was established in 1998 as a working group of the Finnish Nuclear Society to tackle the declining of the nuclear expertise. The objectives of the Young Generation are to attract more young students to the nuclear field, motivate and train young employees, enhance the transfer of knowledge between the generations, and to enable the young students and employees in nuclear field to build a personal network of contacts. This paper summarizes the results of the Finnish Young Generation program. (orig.)

  12. Power generation

    International Nuclear Information System (INIS)

    Nunez, Anibal D.

    2001-01-01

    In the second half of twentieth century, nuclear power became an industrial reality. Now the operating 433 power plants, the 37 plants under construction, near 9000 years/reactor with only one serious accident with emission of radioactive material to the environment (Chernobyl) show the maturity of this technology. Today nuclear power contribute a 17% to the global generation and an increase of 75 % of the demand of electricity is estimated for 2020 while this demand is expected to triplicate by 2050. How this requirement can be satisfied? All the indicators seems to demonstrate that nuclear power will be the solution because of the shortage of other sources, the increase of the prices of the non renewable fuels and the scarce contribution of the renewable ones. In addition, the climatic changes produced by the greenhouse effect make even more attractive nuclear power. The situation of Argentina is analyzed and compared with other countries. The convenience of an increase of nuclear power contribution to the total national generation seems clear and the conclusion of the construction of the Atucha II nuclear power plant is recommended

  13. Environmental conditions analysis program

    International Nuclear Information System (INIS)

    Holten, J.

    1991-01-01

    The PC-based program discussed in this paper has the capability of determining the steady state temperatures of environmental zones (rooms). A program overview will be provided along with examples of formula use. Required input and output from the program will also be discussed. Specific application of plant monitored temperatures and utilization of this program will be offered. The presentation will show how the program can project individual room temperature profiles without continual temperature monitoring of equipment. A discussion will also be provided for the application of the program generated data. Evaluations of anticipated or planned plant modifications and the use of the subject program will also be covered

  14. Idea generation

    DEFF Research Database (Denmark)

    Tollestrup, Christian H. T.; Laursen, Linda Nhu

    2015-01-01

    . Using a straight proposal creation process is expected to create proposals that operate within the present sociocultural meaning. Whereas an approach seeking ambiguity and discrepancy in the initial ideation sparks a deeper sense-making process, which in return creates proposals that can be interpreted...... as having new sociocultural meaning in line with Vergantis definition of radical innovation. This paper discusses the results of an experiment with 32 students on idea generation and product concept development. The experiment was setup as and A-B comparison between two set of students with the same...... objective: designing a new coffee machine for a specific brand, but one group was asked to seek ambiguity and dissonance before creating proposals. Results indicate a very clear difference in the outcome in terms of radical changes in relation to. Group A produced 12 out of 16 proposals in the Styling...

  15. The MC++ event generator toolkit - version 0

    International Nuclear Information System (INIS)

    Loennblad, L.; Nilsson, A.

    1992-01-01

    We present a toolkit, written in the C++ programming language, for event generation in high energy physics. The toolkit, called MC++, is an attempt to formulate the event generation chain in high energy particle collisions in a transparent and generic way using object oriented programming techniques. (orig.)

  16. Achievement report for fiscal 1999 on New Sunshine Program. Frontier research and development of basic superconductive AC power generation equipment; 1999 nendo koryu chodendo denryoku kiki kiban sendo kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    As part of the New Sunshine Program of the Agency of Industrial Science and Technology, a 2-year survey and research is conducted beginning in 1998 on the effect of the introduction of superconductive power equipment for the facilitation of the progress of research and development of basic power equipment which utilizes AC (alternating current) superconductivity. Frontier research and development has been started of basic AC superconductive power equipment for clarifying the tasks to solve in the development effort and for preparing an efficient research and development plan. This fiscal year's endeavor covers the survey of the effect of the introduction of superconductive power equipment in addition to the preparation of a basic plan for the research and development of basic AC superconductive power equipment for fiscal 2000 and afterward, continued survey of research and development trends in and outside Japan for the review of the result achieved in the preceding fiscal year, development of AC equipment element technologies utilizing conduit type semiconductors as a basic study for the embodiment of AC superconductive equipment, and a study for elucidating the mechanism of resistance generated in a superconductive current limiter. Furthermore, papers on the superconduction technology released so far are investigated, and technology development trends and efficient research techniques are put together into a technological information database. (NEDO)

  17. Optimising code generation with haggies

    Science.gov (United States)

    Reiter, T.

    2010-07-01

    This article describes haggies, a program for the generation of optimised programs for the efficient numerical evaluation of mathematical expressions. It uses a multivariate Horner-scheme and Common Subexpression Elimination to reduce the overall number of operations. The package can serve as a back-end for virtually any general purpose computer algebra program. Built-in type inference that allows to deal with non-standard data types in strongly typed languages and a very flexible, pattern-based output specification ensure that haggies can produce code for a large variety of programming languages. We currently use haggies as part of an automated package for the calculation of one-loop scattering amplitudes in quantum field theories. The examples in this articles, however, demonstrate that its use is not restricted to the field of high energy physics. Program summaryProgram title: haggies Catalogue identifier: AEGF_v1_0 Program summary: URL: http://cpc.cs.qub.ac.uk/summaries/AEGF_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU GPL v3 No. of lines in distributed program, including test data, etc.: 56 220 No. of bytes in distributed program, including test data, etc.: 579 010 Distribution format: tar.gz Programming language: Java, JavaCC Computer: Any system that runs the Java Virtual Machine Operating system: Any system that runs the Java Virtual Machine RAM: Determined by the size of the problem Classification: 4.14, 5, 6.2, 6.5, 11.1 Nature of problem: Generation of optimised programs for the evaluation of possibly large algebraic expressions Solution method: Java implementation Running time: Determined by the size of the problem

  18. Steam Generator Inspection Planning Expert System

    International Nuclear Information System (INIS)

    Rzasa, P.

    1987-01-01

    Applying Artificial Intelligence technology to steam generator non-destructive examination (NDE) can help identify high risk locations in steam generators and can aid in preparing technical specification compliant eddy current test (ECT) programs. A steam Generator Inspection Planning Expert System has been developed which can assist NDE or utility personnel in planning ECT programs. This system represents and processes its information using an object oriented declarative knowledge base, heuristic rules, and symbolic information processing, three artificial intelligence based techniques incorporated in the design. The output of the system is an automated generation of ECT programs. Used in an outage inspection, this system significantly reduced planning time

  19. Test Generator for MATLAB Simulations

    Science.gov (United States)

    Henry, Joel

    2011-01-01

    MATLAB Automated Test Tool, version 3.0 (MATT 3.0) is a software package that provides automated tools that reduce the time needed for extensive testing of simulation models that have been constructed in the MATLAB programming language by use of the Simulink and Real-Time Workshop programs. MATT 3.0 runs on top of the MATLAB engine application-program interface to communicate with the Simulink engine. MATT 3.0 automatically generates source code from the models, generates custom input data for testing both the models and the source code, and generates graphs and other presentations that facilitate comparison of the outputs of the models and the source code for the same input data. Context-sensitive and fully searchable help is provided in HyperText Markup Language (HTML) format.

  20. SPOT Program

    Science.gov (United States)

    Smith, Jason T.; Welsh, Sam J.; Farinetti, Antonio L.; Wegner, Tim; Blakeslee, James; Deboeck, Toni F.; Dyer, Daniel; Corley, Bryan M.; Ollivierre, Jarmaine; Kramer, Leonard; hide

    2010-01-01

    A Spacecraft Position Optimal Tracking (SPOT) program was developed to process Global Positioning System (GPS) data, sent via telemetry from a spacecraft, to generate accurate navigation estimates of the vehicle position and velocity (state vector) using a Kalman filter. This program uses the GPS onboard receiver measurements to sequentially calculate the vehicle state vectors and provide this information to ground flight controllers. It is the first real-time ground-based shuttle navigation application using onboard sensors. The program is compact, portable, self-contained, and can run on a variety of UNIX or Linux computers. The program has a modular objec-toriented design that supports application-specific plugins such as data corruption remediation pre-processing and remote graphics display. The Kalman filter is extensible to additional sensor types or force models. The Kalman filter design is also strong against data dropouts because it uses physical models from state and covariance propagation in the absence of data. The design of this program separates the functionalities of SPOT into six different executable processes. This allows for the individual processes to be connected in an a la carte manner, making the feature set and executable complexity of SPOT adaptable to the needs of the user. Also, these processes need not be executed on the same workstation. This allows for communications between SPOT processes executing on the same Local Area Network (LAN). Thus, SPOT can be executed in a distributed sense with the capability for a team of flight controllers to efficiently share the same trajectory information currently being computed by the program. SPOT is used in the Mission Control Center (MCC) for Space Shuttle Program (SSP) and International Space Station Program (ISSP) operations, and can also be used as a post -flight analysis tool. It is primarily used for situational awareness, and for contingency situations.

  1. Plasma generator

    International Nuclear Information System (INIS)

    Omichi, Takeo; Yamanaka, Toshiyuki.

    1976-01-01

    Object: To recycle a coolant in a sealed hollow portion formed interiorly of a plasma limiter itself to thereby to cause direct contact between the coolant and the plasma limiter and increase of contact area therebetween to cool the plasma limiter. Structure: The heat resulting from plasma generated during operation and applied to the body of the plasma limiter is transmitted to the coolant, which recycles through an inlet and outlet pipe, an inlet and outlet nozzle and a hollow portion to hold the plasma limiter at a level less than a predetermined temperature. On the other hand, the heater wire is, at the time of emergency operation, energized to heat the plasma limiter, but this heat is transmitted to the limiter body to increase the temperature thereof. However, the coolant recycling the hollow portion comes into direct contact with the limiter body, and since the plasma limiter surround the hollow portion, the heat amount transmitted from the limiter body to the coolant increases to sufficiently cool the plasma limiter. (Yoshihara, H.)

  2. [Generation Y in ENT: leading a young generation of doctors].

    Science.gov (United States)

    Schmidt, K; Meyer, J; Liebeneiner, J; Schmidt, C E; Hüttenbrink, K B

    2012-11-01

    The shortage of qualified doctors and nurses has led to a competition between hospitals. Analyzing the circumstances of the competition, nurses and doctors of so-called generation Y are important. These employees are mainly female and have different requirements compared to previous generations. Therefore, knowledge of these requirements will become a critical success factor for hospitals in the future. We interviewed medical students in Kiel and Hannover from 2005 to 2011 about the clinical department chosen, the criteria for choosing a specific clinic, and the importance of MD and PhD programs. In addition, we conducted an internet and Medline search for scientific studies on labor shortage, generation Y, and demographics. The data were sorted by main categories and relevance for hospitals. Statistical analyses were performed using descriptive measures. We received 1,097 answers which represents approx. 75% of all students. Sixty-seven percent of the students were female, 33% male. Preferences for departments revealed internal medicine, pediatrics, and anesthesiology as the top three. ENT followed at rank 10. The main criteria for choosing a clinic were working climate, structure and broadness of education, family friendliness, and respect. MD programs were rated 2.6, while PhD programs were rated 3.6. Staff members of Generation Y "live while working" and disagree with hierarchies. Internet and computers are part of their daily routine. Employees of Generation Y challenge leadership in hospitals by increasing demands. However, Generation Y can increase professionalization and competitiveness for hospitals significantly.

  3. New Generator Technology

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, Roy S. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-02-17

    New generator technology project is driven by the need to be able to remotely deploy generator technology where it is needed, when it is needed. Both the military and aid programs that provide assistance after disasters could use the ability to deploy energy generation that fits the needs of the situation. Currently, pre-specified generators are deployed, sometime more than half way around the world to provide electricity. Through our Phase-I to Phase III DARPA grant, we will provide a mechanism where a 3d print station and raw materials could be shipped to a deployment site and remotely deployed personnel. These remote personnel can collaborate with engineers at a home location where 3d print plans can be optimized for the remote purpose. The plans can then be sent electronically to the remote location for printing, much like NASA sent the plans for a socket wrench to the International Space Station for printing in . If multiple generators need to be deployed at different remote locations, within miles of each other the printer rig can be moved to print the generators where they are needed. 3d printing is growing in the field of manufacturing. 3d printing has matured to the point where many types of materials are now available for many types of manufacturing. Both magnetic and electrically conductive material materials have recently been developed which can now lead to 3d printing of engines and generators. Our project will provide a successful printer rig that can be remotely deployed, to print a generator design in the field as well as provide a process for deploying the printed generator as well. This Systems Engineering Management Plan(SEMP) will provide the planning required for a Phase I DARPA grant that may also include goals for Phase II and Phase II grants. The SEMP provides a proposed project schedule, references, system engineering processes, specialty engineering system deployment and product support sections. Each section will state how our company

  4. NASA's Technology Utilization Program.

    Science.gov (United States)

    Farley, C. F.

    1972-01-01

    NASA's Technology Utilization Program is described, illustrating how it can be useful in achieving improved productivity, providing more jobs, solving public sector challenges, and strengthening the international competitive situation. Underlying the program is the fact that research and development conducted in NASA's aeronautics and space programs have generated much technical information concerning processes, products, or techniques which may be useful to engineers, doctors, or to others. The program is based on acquisition and publication, working with the user, and applications engineering.

  5. Transgenerational developmental programming.

    Science.gov (United States)

    Aiken, Catherine E; Ozanne, Susan E

    2014-01-01

    The concept of developmental programming suggests that the early life environment influences offspring characteristics in later life, including the propensity to develop diseases such as the metabolic syndrome. There is now growing evidence that the effects of developmental programming may also manifest in further generations without further suboptimal exposure. This review considers the evidence, primarily from rodent models, for effects persisting to subsequent generations, and evaluates the mechanisms by which developmental programming may be transmitted to further generations. In particular, we focus on the potential role of the intrauterine environment in contributing to a developmentally programmed phenotype in subsequent generations. The literature was systematically searched at http://pubmed.org and http://scholar.google.com to identify published findings regarding transgenerational (F2 and beyond) developmental programming effects in human populations and animal models. Transmission of programming effects is often viewed as a form of epigenetic inheritance, either via the maternal or paternal line. Evidence exists for both germline and somatic inheritance of epigenetic modifications which may be responsible for phenotypic changes in further generations. However, there is increasing evidence for the role of both extra-genomic components of the zygote and the interaction of the developing conceptus with the intrauterine environment in propagating programming effects. The contribution of a suboptimal reproductive tract environment or maternal adaptations to pregnancy may be critical to inheritance of programming effects via the maternal line. As the effects of age exacerbate the programmed metabolic phenotype, advancing maternal age may increase the likelihood of developmental programming effects being transmitted to further generations. We suggest that developmental programming effects could be propagated through the maternal line de novo in generations

  6. 76 FR 23502 - Fee-Generating Cases

    Science.gov (United States)

    2011-04-27

    ...-generating case restrictions in part 1609. List of Subjects in 45 CFR Part 1609 Grant programs--law, Legal... LEGAL SERVICES CORPORATION 45 CFR Part 1609 Fee-Generating Cases AGENCY: Legal Services... on fee-generating cases to clarify that it applies only to LSC and private non-LSC funds. DATES: This...

  7. Computer-assisted structure elucidation from 13C-NMR-Spectra. I. The development of a three-dimensional structure code. II. The development of an isomer generating program

    International Nuclear Information System (INIS)

    Schuetz, V.

    1999-05-01

    The presented thesis consists of two separate programs which both aid the automated structure elucidation in the CSEARCH database system. A successful utilization of a large collection of NMR reference spectra for the prediction of chemical shift values is dependent on a strong correlation between the spectral data and the structural information via unique coding. By now, this was done using the two-dimensional HOSE code, which turned out to be insufficient whenever stereochemical effects other than cis/trans-isomerism contribute to the chemical shift values. Therefore, this new algorithm has been developed to derive the demanded three-dimensional descriptors. The calculation is performed by matching the query structures against pattern molecules taken from a carefully selected library of ring skeletons. No three-dimensional coordinates are necessary, since the algorithm elucidates the descriptors on base of two-dimensional structures having their stereocenters specified using 'up/down' bonds. The descriptors are defined as number of interactions over 3 to 5 bonds, number of cis-substituents over 1 to 2 ringbonds and markers for axial substituents. This approach of deriving descriptors for steric interactions has successfully extended the HOSE coding scheme and has been implemented into a neural network; both methods allow for high-quality prediction of 13 C-NMR chemical shift values. The second algorithm is an isomer generating program named GENERAL, which efficiently supports the structure elucidation process by calculating all mathematically possible structures to a given molecular formula. The resulting list of structures is exhaustive and free of redundancy. Besides the basic input information - like the molecular formula and the specification of structural fragments, constraints can be defined to restrict the number of resulting structures. The most valuable information is provided by state-of-the-art 2D-NMR experiments and can be easily incorporated into

  8. Design of the 2009 evaluation of the Medical Insurance for a New Generation program Diseño de la evaluación 2009 del programa Seguro Médico para una Nueva Generación

    Directory of Open Access Journals (Sweden)

    Ricardo Pérez-Cuevas

    2012-01-01

    Full Text Available OBJECTIVE: To describe the mixed-method approach to evaluate the Medical Insurance for a New Generation (Seguro Médico para una Nueva Generación, SMNG. MATERIALS AND METHODS: The program has been comprehensively evaluated. It has four key domains: 1 SMNG design; 2 children's health status and socio-demographic characteristics; 3 performance by measuring coverage, efficiency and productivity; 4 family health expenditure. Quantitative and qualitative research approaches have been used. This included reviews of existing databases and clinical charts, collection of empirical data through in-depth interviews with healthcare providers, and a nation-wide household survey. CONCLUSION: The results should serve as baseline data of the health status of SMNG children and the current staus of the program.OBJETIVO: Describir el abordaje de métodos mixtos que se utilizó para evaluar el SMNG Seguro Médico para una Nueva Generación. MATERIAL Y MÉTODOS: la evaluación integral del Programa se llevó a cabo en cuatro áreas clave: 1 el diseño del SMNG, 2 el estado de salud y las características sociodemográficas de los niños afiliados, 3 el desempeño del SMNG mediante la medición de la cobertura y de procesos clave, 4 los gastos en salud de la familia. La metodología mixta combina enfoques de investigación cuantitativa y cualitativa y la recolección y análisis de datos. La evaluación incluyó la revisión de bases de datos y de expedientes clínicos y la recolección de datos empíricos mediante entrevistas a profundidad con actores clave, una encuesta de hogares en todo el país y cuestionarios a personal de salud. CONCLUSIÓN: Los resultados sirven como referencia sobre el estado de salud de los niños afiliados al SMNG y de las condiciones actuales del programa; además permiten identificar áreas clave que pueden abordarse para mejorar la calidad, eficiencia y eficacia del SMNG.

  9. CANDU steam generator life management

    Energy Technology Data Exchange (ETDEWEB)

    Tapping, R.L. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada); Nickerson, J. [Atomic Energy of Canada Limited, Mississauga, Ontario (Canada); Spekkens, P.; Maruska, C. [Ontario Hydro, Toronto, Ontario (Canada)

    1998-01-01

    Steam generators are a critical component of a nuclear power reactor, and can contribute significantly to station unavailability, as has been amply demonstrated in Pressurized Water Reactors (PWRs). CANDU steam generators are not immune to steam generator degradation, and the variety of CANDU steam generator designs and tube materials has led to some unexpected challenges. However, aggressive remedial actions, and careful proactive maintenance activities, have led to a decrease in steam generator-related station unavailability of Canadian CANDUs. AECL and the CANDUutilities have defined programs that will enable existing or new steam generators to operate effectively for 40 years. Research and development work covers corrosion and mechanical degradation of tube bundles and internals, chemistry, thermalhydraulics, fouling, inspection and cleaning, as well as provision for specially tool development for specific problem solving. A major driving force is development of CANDU-specific fitness-for-service guidelines, including appropriate inspection and monitoring technology to measure steam generator condition. Longer-range work focuses on development of intelligent on-line monitoring for the feedwater system and steam generator. New designs have reduced risk of corrosion and fouling, are more easily inspected and cleaned, and are less susceptible to mechanical damage. The Canadian CANDU utilities have developed programs for remedial actions to combat degradation of performance (Gentilly-2, Point Lepreau, Bruce A/B, Pickering A/B), and have developed strategic plans to ensure that good future operation is ensured. The research and development program, as well as operating experience, has identified where improvements in operating practices and/or designs can be made in order to ensure steam generator design life at an acceptable capacity factory. (author)

  10. CANDU steam generator life management

    International Nuclear Information System (INIS)

    Tapping, R.L.; Nickerson, J.; Spekkens, P.; Maruska, C.

    1998-01-01

    Steam generators are a critical component of a nuclear power reactor, and can contribute significantly to station unavailability, as has been amply demonstrated in Pressurized Water Reactors (PWRs). CANDU steam generators are not immune to steam generator degradation, and the variety of CANDU steam generator designs and tube materials has led to some unexpected challenges. However, aggressive remedial actions, and careful proactive maintenance activities, have led to a decrease in steam generator-related station unavailability of Canadian CANDUs. AECL and the CANDU utilities have defined programs that will enable existing or new steam generators to operate effectively for 40 years. Research and development work covers corrosion and mechanical degradation of tube bundles and internals, chemistry, thermalhydraulics, fouling, inspection and cleaning, as well as provision for specially tool development for specific problem solving. A major driving force is development of CANDU-specific fitness-for-service guidelines, including appropriate inspection and monitoring technology to measure steam generator condition. Longer-range work focuses on development of intelligent on-line monitoring for the feedwater system and steam generator. New designs have reduced risk of corrosion and fouling, are more easily inspected and cleaned, and are less susceptible to mechanical damage. The Canadian CANDU utilities have developed programs for remedial actions to combat degradation of performance (Gentilly-2, Point Lepreau, Bruce A/B, Pickering A/B), and have developed strategic plans to ensure that good future operation is ensured. The research and development program, as well as operating experience, has identified where improvements in operating practices and/or designs can be made in order to ensure steam generator design life at an acceptable capacity factory. (author)

  11. Molecular Determinants of Response to Anti-Programmed Cell Death (PD)-1 and Anti-Programmed Death-Ligand 1 (PD-L1) Blockade in Patients With Non-Small-Cell Lung Cancer Profiled With Targeted Next-Generation Sequencing.

    Science.gov (United States)

    Rizvi, Hira; Sanchez-Vega, Francisco; La, Konnor; Chatila, Walid; Jonsson, Philip; Halpenny, Darragh; Plodkowski, Andrew; Long, Niamh; Sauter, Jennifer L; Rekhtman, Natasha; Hollmann, Travis; Schalper, Kurt A; Gainor, Justin F; Shen, Ronglai; Ni, Ai; Arbour, Kathryn C; Merghoub, Taha; Wolchok, Jedd; Snyder, Alexandra; Chaft, Jamie E; Kris, Mark G; Rudin, Charles M; Socci, Nicholas D; Berger, Michael F; Taylor, Barry S; Zehir, Ahmet; Solit, David B; Arcila, Maria E; Ladanyi, Marc; Riely, Gregory J; Schultz, Nikolaus; Hellmann, Matthew D

    2018-03-01

    Purpose Treatment of advanced non-small-cell lung cancer with immune checkpoint inhibitors (ICIs) is characterized by durable responses and improved survival in a subset of patients. Clinically available tools to optimize use of ICIs and understand the molecular determinants of response are needed. Targeted next-generation sequencing (NGS) is increasingly routine, but its role in identifying predictors of response to ICIs is not known. Methods Detailed clinical annotation and response data were collected for patients with advanced non-small-cell lung cancer treated with anti-programmed death-1 or anti-programmed death-ligand 1 [anti-programmed cell death (PD)-1] therapy and profiled by targeted NGS (MSK-IMPACT; n = 240). Efficacy was assessed by Response Evaluation Criteria in Solid Tumors (RECIST) version 1.1, and durable clinical benefit (DCB) was defined as partial response/stable disease that lasted > 6 months. Tumor mutation burden (TMB), fraction of copy number-altered genome, and gene alterations were compared among patients with DCB and no durable benefit (NDB). Whole-exome sequencing (WES) was performed for 49 patients to compare quantification of TMB by targeted NGS versus WES. Results Estimates of TMB by targeted NGS correlated well with WES (ρ = 0.86; P ratio, 1.38; P = .024). The fraction of copy number-altered genome was highest in those with NDB. Variants in EGFR and STK11 associated with a lack of benefit. TMB and PD-L1 expression were independent variables, and a composite of TMB plus PD-L1 further enriched for benefit to ICIs. Conclusion Targeted NGS accurately estimates TMB and elevated TMB further improved likelihood of benefit to ICIs. TMB did not correlate with PD-L1 expression; both variables had similar predictive capacity. The incorporation of both TMB and PD-L1 expression into multivariable predictive models should result in greater predictive power.

  12. Data and product needs for influenza immunization programs in low- and middle-income countries: Rationale and main conclusions of the WHO preferred product characteristics for next-generation influenza vaccines.

    Science.gov (United States)

    Neuzil, Kathleen M; Bresee, Joseph S; de la Hoz, Fernando; Johansen, Kari; Karron, Ruth A; Krishnan, Anand; Madhi, Shabir A; Mangtani, Punam; Spiro, David J; Ortiz, Justin R

    2017-10-13

    In 2017, WHO convened a working group of global experts to develop the Preferred Product Characteristics (PPC) for Next-Generation Influenza Vaccines. PPCs are intended to encourage innovation in vaccine development. They describe WHO preferences for parameters of vaccines, in particular their indications, target groups, implementation strategies, and clinical data needed for assessment of safety and efficacy. PPCs are shaped by the global unmet public health need in a priority disease area for which WHO encourages vaccine development. These preferences reflect WHO's mandate to promote the development of vaccines with high public health impact and suitability in Low- and Middle-Income Countries (LMIC). The target audience is all entities intending to develop or to achieve widespread adoption of a specific influenza vaccine product in these settings. The working group determined that existing influenza vaccines are not well suited for LMIC use. While many developed country manufactures and research funders prioritize influenza vaccine products for use in adults and the elderly, most LMICs do not have sufficiently strong health systems to deliver vaccines to these groups. Policy makers from LMICs are expected to place higher value on vaccines indicated for prevention of severe illness, however the clinical development of influenza vaccines focuses on demonstrating prevention of any influenza illness. Many influenza vaccine products do not meet WHO standards for programmatic suitability of vaccines, which introduces challenges when vaccines are used in low-resource settings. And finally, current vaccines do not integrate well with routine immunization programs in LMICs, given age of vaccine licensure, arbitrary expiration dates timed for temperate country markets, and the need for year-round immunization in countries with prolonged influenza seasonality. While all interested parties should refer to the full PPC document for details, in this article we highlight data

  13. Trip generation characteristics of special generators

    Science.gov (United States)

    2010-03-01

    Special generators are introduced in the sequential four-step modeling procedure to represent certain types of facilities whose trip generation characteristics are not fully captured by the standard trip generation module. They are also used in the t...

  14. Strategic maintenance plan for Cernavoda steam generators

    International Nuclear Information System (INIS)

    Cicerone, T.; Dhar, D.; VandenBerg, J.P.

    2002-01-01

    Steam generators are among the most important pieces of equipment in a nuclear power plant. They are required full time during the plant operation and obviously no redundancy exists. Past experience has shown that those utilities which implemented comprehensive steam generator inspection and maintenance programs and strict water chemistry controls, have had good steam generator performance that supports good overall plant performance. The purpose of this paper is to discuss a strategic Life Management and Operational-monitoring program for the Cernavoda steam generators. The program is first of all to develop a base of expertise for the management of the steam generator condition; and that is to be supported by a program of actions to be accomplished over time to assess their condition, to take measures to avoid degradation and to provide for inspections, cleaning and modifications as necessary. (author)

  15. Investigation - Derived Waste Program

    International Nuclear Information System (INIS)

    Beardsley, C.; Anderson, R.

    1998-06-01

    The Investigation-Derived Waste Program is a software application that was developed to identify the groundwater monitoring wells at the Savannah River Site that require containerization and treatment for purge water generated during sampling

  16. Why Generation WWW.Y?

    Science.gov (United States)

    Harper, Dennis; Conor, Jeff; Course, Amanda

    1999-01-01

    Describes Generation www.Y (Gen Y), a program that trains technology-savvy students to help teachers incorporate technology into their lessons. Discusses how Gen Y works; benefits for students and teachers; and how Gen Y is funded. One table lists differences between the traditional way of infusing technology and the Gen Y way. The two student…

  17. [Intel random number generator-based true random number generator].

    Science.gov (United States)

    Huang, Feng; Shen, Hong

    2004-09-01

    To establish a true random number generator on the basis of certain Intel chips. The random numbers were acquired by programming using Microsoft Visual C++ 6.0 via register reading from the random number generator (RNG) unit of an Intel 815 chipset-based computer with Intel Security Driver (ISD). We tested the generator with 500 random numbers in NIST FIPS 140-1 and X(2) R-Squared test, and the result showed that the random number it generated satisfied the demand of independence and uniform distribution. We also compared the random numbers generated by Intel RNG-based true random number generator and those from the random number table statistically, by using the same amount of 7500 random numbers in the same value domain, which showed that the SD, SE and CV of Intel RNG-based random number generator were less than those of the random number table. The result of u test of two CVs revealed no significant difference between the two methods. Intel RNG-based random number generator can produce high-quality random numbers with good independence and uniform distribution, and solves some problems with random number table in acquisition of the random numbers.

  18. Self generation, small generation, and embedded generation issues

    International Nuclear Information System (INIS)

    2001-01-01

    The New Brunswick Market Design Committee for electric power restructuring has been directed to examine issues regarding cogeneration and small-scale, on-site generation and how they will fit within the framework of the bilateral contract market. The Committee will also have to deal with issues of generation embedded in a distribution system. The Committee has defined cogeneration as the simultaneous production of electricity and useful thermal energy. Self-generation has been defined as small-scale power generation by an end-user, while embedded generation has been defined as a generation facility that is located within a distribution utility but is not directly connected to the transmission system. The Committee has postponed its decision on whether embedded generation will be eligible to participate under the bilateral contract market for electricity. This report discusses general issues such as the physical support of generation, market support of generation, transition issues and policy issues. It also discusses generation support issues such as operating reserves, transmission tariff issues, and distribution tariffs. Market support issues such as transmission access for generation sales were also considered, along with market access for generation sales, and net metering for behind the meter generation. 7 refs., 1 tab

  19. Horizontal steam generator thermal-hydraulics

    Energy Technology Data Exchange (ETDEWEB)

    Ubra, O. [SKODA Praha Company, Prague (Czechoslovakia); Doubek, M. [Czech Technical Univ., Prague (Czechoslovakia)

    1995-09-01

    Horizontal steam generators are typical components of nuclear power plants with pressure water reactor type VVER. Thermal-hydraulic behavior of horizontal steam generators is very different from the vertical U-tube steam generator, which has been extensively studied for several years. To contribute to the understanding of the horizontal steam generator thermal-hydraulics a computer program for 3-D steady state analysis of the PGV-1000 steam generator has been developed. By means of this computer program, a detailed thermal-hydraulic and thermodynamic study of the horizontal steam generator PGV-1000 has been carried out and a set of important steam generator characteristics has been obtained. The 3-D distribution of the void fraction and 3-D level profile as functions of load and secondary side pressure have been investigated and secondary side volumes and masses as functions of load and pressure have been evaluated. Some of the interesting results of calculations are presented in the paper.

  20. Programming language for computations in the Interkosmos program

    Science.gov (United States)

    Schmidt, K.

    1975-01-01

    The programming system for Intercosmos data processing, based on the structural programming theory, which considers a program as an ordered set of standardized elementary parts, from which the user programs are automatically generated, is described. The programs are comprised of several modules, which are briefly summarized. The general structure of the programming system is presented in a block diagram. A programming control language developed to formulate the problem quickly and completely is presented along with basic symbols which are characteristic of the Intercosmos programming system.

  1. Leading Generation Y

    National Research Council Canada - National Science Library

    Newman, Jill M

    2008-01-01

    .... Whether referred to as the Millennial Generation, Generation Y or the Next Generation, the Army needs to consider the gap between Boomers, Generation X and the Soldiers that fill our junior ranks...

  2. Implantação de um programa de gerenciamento de resíduos químicos e águas servidas nos laboratórios de ensino e pesquisa no CENA/USP Establishment of a management program for chemical residues and waste water, generated in laboratories of the centro de energia nuclear na agricultura (CENA/USP

    Directory of Open Access Journals (Sweden)

    Glauco Arnold Tavares

    2005-08-01

    Full Text Available The aim of this work is to establish a program for the treatment of chemical residues and waste waters at the Centro de Energia Nuclear na Agricultura (CENA/USP, for environmental preservation and training of staff. Five tons of stored residues and the ones currently generated in the laboratories have to be treated. Rational use of water is also part of the program. The traditional purification by distillation has been replaced by purification with ion exchange resins. Lower energy consumption and better water quality were achieved.

  3. The second generation biofuels from the biomass

    International Nuclear Information System (INIS)

    2007-01-01

    The author takes stock on the second generation biofuels in the world, the recent technologies, their advantages, the research programs and the economical and environmental impacts of the biofuels development. (A.L.B.)

  4. A simulation model for wind energy storage systems. Volume 3: Program descriptions

    Science.gov (United States)

    Warren, A. W.; Edsinger, R. W.; Burroughs, J. D.

    1977-01-01

    Program descriptions, flow charts, and program listings for the SIMWEST model generation program, the simulation program, the file maintenance program, and the printer plotter program are given. For Vol 2, see .

  5. Gas-Cooled Reactor Programs annual progress report for period ending December 31, 1973. [HTGR fuel reprocessing, fuel fabrication, fuel irradiation, core materials, and fission product distribution; GCFR fuel irradiation and steam generator modeling

    Energy Technology Data Exchange (ETDEWEB)

    Kasten, P.R.; Coobs, J.H.; Lotts, A.L.

    1976-04-01

    Progress is summarized in studies relating to HTGR fuel reprocessing, refabrication, and recycle; HTGR fuel materials development and performance testing; HTGR PCRV development; HTGR materials investigations; HTGR fuel chemistry; HTGR safety studies; and GCFR irradiation experiments and steam generator modeling.

  6. HECO annually conducts and reports results of a biological monitoring program for waters receiving effluent from the Kahe Generating Station, O'ahu, Hawai'i from 1977 to 1996 (NODC Accession 9900012)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The volume of sand and silt entrained and circulated by operation of the Kahe Generating Station is an environmental parameter of considerable geological and...

  7. Young generation network: facing the future

    International Nuclear Information System (INIS)

    Berk, R.

    1997-01-01

    The future of the nuclear industry lies with the young generation. That's why in 1995, ENS supported the creation of the Young Generation Network (YGN). The YGN aims to fulfill the needs and interests of young people working in the nuclear business by organizing special programs with interesting opportunities and activities. (author)

  8. The Siemens graduate program

    International Nuclear Information System (INIS)

    Schaeffler, I.

    2000-01-01

    Siemens is an international company acting in different domains: power generation, communication and information, traffic, health, etc. To be more flexible and active in a world in constant evolution, the company proposes a graduate program where young people with a special background have the possibility to start an international career in all the domains of activity. This graduate program is especially important in the domain of nuclear energy, where the know-how transfer between the previous generation and the new one is a constant point of interest. This article presents the conditions to be accepted in this graduate program, and the supplementary training supporting this program. The Siemens graduate program (Sg) proposes a global concept with a main emphasis being international. (authors)

  9. Electrical power generating system. [for windpowered generation

    Science.gov (United States)

    Nola, F. J. (Inventor)

    1981-01-01

    An alternating current power generation system adopted to inject power in an already powered power line is discussed. The power generating system solves to adjustably coup an induction motor, as a generator, to an ac power line wherein the motor and power line are connected through a triac. The triac is regulated to normally turn on at a relatively late point in each half cycle of its operation, whereby at less than operating speed, and thus when the induction motor functions as a motor rather than as a generator, power consumption from the line is substantially reduced. The principal application will be for windmill powered generation.

  10. Employee motivation: training, idea generation, incentive approaches.

    Science.gov (United States)

    Alpert, M S

    1986-05-01

    If the terms "skill-building," "idea generation" and "rewards programming system" are not part of your vocabulary or strategy to motivate employees in your medical record department, this article will provide some valuable insights. A successful motivation program based on these elements will benefit both employee and employer by providing stronger employee participation, more job satisfaction, enhanced productivity and overall increased success.

  11. Partnership for electrical generation technology education

    International Nuclear Information System (INIS)

    Rasmussen, R. S.; Beaty, L.; Holman, R.

    2006-01-01

    This Engineering Technician education effort adapts an existing two-year Instrumentation and Control (I and C) education program into a model that is focused on electrical-generation technologies. It will also locally implement a program developed elsewhere with National Science Foundation funding, aimed at public schools, and adapt it to stimulate pre-college interest in pursuing energy careers in general. (authors)

  12. Distributed generation induction and permanent magnet generators

    CERN Document Server

    Lai, L

    2007-01-01

    Distributed power generation is a technology that could help to enable efficient, renewable energy production both in the developed and developing world. It includes all use of small electric power generators, whether located on the utility system, at the site of a utility customer, or at an isolated site not connected to the power grid. Induction generators (IGs) are the cheapest and most commonly used technology, compatible with renewable energy resources. Permanent magnet (PM) generators have traditionally been avoided due to high fabrication costs; however, compared with IGs they are more reliable and productive. Distributed Generation thoroughly examines the principles, possibilities and limitations of creating energy with both IGs and PM generators. It takes an electrical engineering approach in the analysis and testing of these generators, and includes diagrams and extensive case study examples o better demonstrate how the integration of energy sources can be accomplished. The book also provides the ...

  13. Solar index generation and delivery

    Energy Technology Data Exchange (ETDEWEB)

    Lantz, L.J.

    1980-01-01

    The Solar Index, or, more completely defined as the Service Hot Water Solar Index, was conceptualized during the spring of 1978. The purpose was to enhance public awareness to solar energy usability. Basically, the Solar Index represents the percentage of energy that solar would provide in order to heat an 80 gallon service hot water load for a given location and day. The Index is computed by utilizing SOLCOST, a computer program, which also has applications to space heating, cooling, and heat pump systems and which supplies economic analyses for such solar energy systems. The Index is generated for approximately 68 geographic locations in the country on a daily basis. The definition of the Index, how the project came to be, what it is at the present time and a plan for the future are described. Also presented are the models used for the generation of the Index, a discussion of the primary tool of implementation (the SOLCOST program) and future efforts.

  14. Report on Distributed Generation Penetration Study

    Energy Technology Data Exchange (ETDEWEB)

    Miller, N.; Ye, Z.

    2003-08-01

    This report documents part of a multiyear research program dedicated to the development of requirements to support the definition, design, and demonstration of a distributed generation-electric power system interconnection interface concept. The report focuses on the dynamic behavior of power systems when a significant portion of the total energy resource is distributed generation. It also focuses on the near-term reality that the majority of new DG relies on rotating synchronous generators for energy conversion.

  15. Hydrogen Generation From Electrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Steven Cohen; Stephen Porter; Oscar Chow; David Henderson

    2009-03-06

    today that perform in a range of efficiencies, >95%, that are suitable for the overall operational goals. The balance of plant scales well both operationally and in terms of cost becoming a smaller portion of the overall cost equation as the systems get larger. Capital cost reduction of the cell stack power supplies is achievable by modifying the system configuration to have the cell stacks in electrical series driving up the DC bus voltage, thereby allowing the use of large-scale DC power supply technologies. The single power supply approach reduces cost. Elements of the cell stack cost reduction and efficiency improvement work performed in the early stage of the program is being continued in subsequent DOE sponsored programs and through internal investment by Proton. The results of the trade study of the 100 kg H2/day system have established a conceptual platform for design and development of a next generation electrolyzer for Proton. The advancements started by this program have the possibility of being realized in systems for the developing fueling markets in 2010 period.

  16. User's Manual for SAG-2 SHARC/SAMM Atmosphere Generator

    National Research Council Canada - National Science Library

    Shroll, Robert

    2003-01-01

    The SHARC Atmosphere Generator (SAG) is a stand-alone, interactive program that utilizes a combination of empirical models to generate atmospheric profiles for Air Force IR radiation codes that account for systematic variability...

  17. Random pulse generator

    International Nuclear Information System (INIS)

    Guo Ya'nan; Jin Dapeng; Zhao Dixin; Liu Zhen'an; Qiao Qiao; Chinese Academy of Sciences, Beijing

    2007-01-01

    Due to the randomness of radioactive decay and nuclear reaction, the signals from detectors are random in time. But normal pulse generator generates periodical pulses. To measure the performances of nuclear electronic devices under random inputs, a random generator is necessary. Types of random pulse generator are reviewed, 2 digital random pulse generators are introduced. (authors)

  18. US/USSR cooperative program in open-cycle MHD electrical power gneration. Joint test report No. 2: tests in the U-25B facility; MHD generator test No. 3

    Energy Technology Data Exchange (ETDEWEB)

    Tempelmeyer, K E; Sokolov, Y N [eds.

    1979-04-01

    The third joint test with a Soviet U-25B MHD generator and a US superconducting magnet system (SCMS) was conducted in the Soviet U-25B Facility. The primary objectives of the 3rd test were: (1) to operate the facility and MHD channel over a wider range of test parameters, and (2) to study the performance of all components and systems of the flow train at increased mass flow rates of combustion products (up to 4 kg/s), at high magnetic-field induction (up to 5 T), and high values of the electrical field in the MHD generator. The third test has demonstrated that all components and systems of the U-25B facility performed reliably. The electric power generated by the MHD generaor reached a maximum of 575 kW during this test. The MHD generator was operated under electrical loading conditions for 9 hours, and the combustor for a total of approximately 14 hours. Very high Hall fields (2.1 kV/m) were produced in the MHD channel, with a total Hall voltage of 4.24 kV. A detailed description is given of (1) performance of all components and systems of the U-25B facility, (2) analysis of the thermal, gasdynamic, and electrical characteristics of the MHD generator, (3) results of plasma diagnostic studies, (4) studies of vibrational characteristics of the flow train, (5) fluctuation of electrodynamic and gasdynamic parameters, (6) interaction of the MHD generator with the superconducting magnet, and (7) an operational problem, which terminated the test.

  19. Stability study in one step steam generators

    International Nuclear Information System (INIS)

    Abbate, P.

    1990-01-01

    The TWO program is presented developed for the behaviour limit calculation stable in one step steam generators for the case of Density Waves phenomenom. The program is based on a nodal model which, using Laplace transformation equations, allows to study the system's transfer functions and foresee the beginning of the unstable behaviour. This program has been satisfactorily validated against channels data uniformly heated in the range from 4.0 to 6.0 Mpa. Results on the CAREM reactor's steam generator analysis are presented. (Author) [es

  20. Master of Science (MSc Program in Radiation Biology: An Interdepartmental Course Bridging the Gap between Radiation-Related Preclinical and Clinical Disciplines to Prepare Next-Generation Medical Scientists

    Directory of Open Access Journals (Sweden)

    Stephanie E. Combs

    2017-09-01

    Full Text Available Radiation biology is a highly interdisciplinary field at the interface of biology, physics, and medicine. It is characterized by rapid advances in biological and technical knowledge. The potential for using these advances to optimize medical care, radiation protection, and related fields can be exploited only with complementary activities to support the education of young academics. A small number of academic institutions have committed resources into radiation-related courses and curricula; however, few offer a comprehensive interdepartmental research and training program. At the Technical University of Munich (TUM, a full Master of Science (MSc course in radiation biology has been established. This article describes the TUM MSc radiation biology program, discusses the scope of the field, the teaching goals, and the interdisciplinary curriculum. Detailed information on the full MSc program can be found continuously updated at www.radonc.med.tum.de/masterradiationbiology.

  1. Master of Science (MSc) Program in Radiation Biology: An Interdepartmental Course Bridging the Gap between Radiation-Related Preclinical and Clinical Disciplines to Prepare Next-Generation Medical Scientists.

    Science.gov (United States)

    Combs, Stephanie E; Kessel, Carmen; Wilkens, Jan J; Multhoff, Gabriele; Schmid, Thomas E; Vaupel, Peter; Trott, Klaus-Rüdiger; Berberat, Pascal; Atkinson, Michael J

    2017-01-01

    Radiation biology is a highly interdisciplinary field at the interface of biology, physics, and medicine. It is characterized by rapid advances in biological and technical knowledge. The potential for using these advances to optimize medical care, radiation protection, and related fields can be exploited only with complementary activities to support the education of young academics. A small number of academic institutions have committed resources into radiation-related courses and curricula; however, few offer a comprehensive interdepartmental research and training program. At the Technical University of Munich (TUM), a full Master of Science (MSc) course in radiation biology has been established. This article describes the TUM MSc radiation biology program, discusses the scope of the field, the teaching goals, and the interdisciplinary curriculum. Detailed information on the full MSc program can be found continuously updated at www.radonc.med.tum.de/masterradiationbiology.

  2. Hazardous Waste Generators

    Data.gov (United States)

    Vermont Center for Geographic Information — The HazWaste database contains generator (companies and/or individuals) site and mailing address information, waste generation, the amount of waste generated etc. of...

  3. MHD Power Generation

    Science.gov (United States)

    Kantrowitz, Arthur; Rosa, Richard J.

    1975-01-01

    Explains the operation of the Magnetohydrodynamic (MHD) generator and advantages of the system over coal, oil or nuclear powered generators. Details the development of MHD generators in the United States and Soviet Union. (CP)

  4. Generative Anatomy Modeling Language (GAML).

    Science.gov (United States)

    Demirel, Doga; Yu, Alexander; Baer-Cooper, Seth; Halic, Tansel; Bayrak, Coskun

    2017-12-01

    This paper presents the Generative Anatomy Modeling Language (GAML) for generating variation of 3D virtual human anatomy in real-time. This framework provides a set of operators for modification of a reference base 3D anatomy. The perturbation of the 3D models is satisfied with nonlinear geometry constraints to create an authentic human anatomy. GAML was used to create 3D difficult anatomical scenarios for virtual simulation of airway management techniques such as Endotracheal Intubation (ETI) and Cricothyroidotomy (CCT). Difficult scenarios for each technique were defined and the model variations procedurally created with GAML. This study presents details of the GAML design, set of operators, types of constraints. Cases of CCT and ETI difficulty were generated and confirmed by expert surgeons. Execution performance pertaining to an increasing complexity of constraints using nonlinear programming was in real-time execution. Copyright © 2017 John Wiley & Sons, Ltd.

  5. Radioisotope Power Systems Program: A Program Overview

    Science.gov (United States)

    Hamley, John A.

    2016-01-01

    NASA's Radioisotope Power Systems (RPS) Program continues to plan, mature research in energy conversion, and partners with the Department of Energy (DOE) to make RPS ready and available to support the exploration of the solar system in environments where the use of conventional solar or chemical power generation is impractical or impossible to meet potential future mission needs. Recent programs responsibilities include providing investment recommendations to NASA stakeholders on emerging thermoelectric and Stirling energy conversion technologies and insight on NASA investments at DOE in readying a generator for the Mars 2020 mission. This presentation provides an overview of the RPS Program content and status and the approach used to maintain the readiness of RPS to support potential future NASA missions.

  6. Power Generation for River and Tidal Generators

    Energy Technology Data Exchange (ETDEWEB)

    Muljadi, Eduard [National Renewable Energy Lab. (NREL), Golden, CO (United States); Wright, Alan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Gevorgian, Vahan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Donegan, James [Ocean Renewable Power Company (ORPC), Portland, ME (United States); Marnagh, Cian [Ocean Renewable Power Company (ORPC), Portland, ME (United States); McEntee, Jarlath [Ocean Renewable Power Company (ORPC), Portland, ME (United States)

    2016-06-01

    Renewable energy sources are the second largest contributor to global electricity production, after fossil fuels. The integration of renewable energy continued to grow in 2014 against a backdrop of increasing global energy consumption and a dramatic decline in oil prices during the second half of the year. As renewable generation has become less expensive during recent decades, and it becomes more accepted by the global population, the focus on renewable generation has expanded from primarily wind and solar to include new types with promising future applications, such as hydropower generation, including river and tidal generation. Today, hydropower is considered one of the most important renewable energy sources. In river and tidal generation, the input resource flow is slower but also steadier than it is in wind or solar generation, yet the level of water turbulent flow may vary from one place to another. This report focuses on hydrokinetic power conversion.

  7. A program for assisting automatic generation control of the ELETRONORTE using artificial neural network; Um programa para assistencia ao controle automatico de geracao da Eletronorte usando rede neuronal artificial

    Energy Technology Data Exchange (ETDEWEB)

    Brito Filho, Pedro Rodrigues de; Nascimento Garcez, Jurandyr do [Para Univ., Belem, PA (Brazil). Centro Tecnologico; Charone Junior, Wady [Centrais Eletricas do Nordeste do Brasil S.A. (ELETRONORTE), Belem, PA (Brazil)

    1994-12-31

    This work presents an application of artificial neural network as a support to decision making in the automatic generation control (AGC) of the ELETRONORTE. It uses a software to auxiliary in the decisions in real time of the AGC. (author) 2 refs., 6 figs., 1 tab.

  8. University of Maine’s Follow a Researcher™ Program: Using Graduate Student Field Research as a Framework to Incorporate Next Generation Science Standards (NGSS) Practices in the K-12 Classroom

    OpenAIRE

    Kaluzienski, Lynn; Hamley, Catherine; Rodda, Charles; Kranich, Gregory; Wilson, Laura

    2016-01-01

    Follow a Researcher™ is an innovative University of Maine 4-H program that connects youth with a graduate student who is conducting field research in a remote location. Using technology and social media, K-12 classrooms have an unprecedented opportunity to get to know a student researcher. Youth engage in the research process and witness NGSS Science and Engineering Practices in action.

  9. The second generation biofuels from the biomass; Les biocarburants de deuxieme generation issus de la biomasse

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    The author takes stock on the second generation biofuels in the world, the recent technologies, their advantages, the research programs and the economical and environmental impacts of the biofuels development. (A.L.B.)

  10. Magnetohydrodynamic (MHD) power generation

    International Nuclear Information System (INIS)

    Chandra, Avinash

    1980-01-01

    The concept of MHD power generation, principles of operation of the MHD generator, its design, types, MHD generator cycles, technological problems to be overcome, the current state of the art in USA and USSR are described. Progress of India's experimental 5 Mw water-gas fired open cycle MHD power generator project is reported in brief. (M.G.B.)

  11. Minding the Generation Gap

    Science.gov (United States)

    Field, John

    2011-01-01

    Generational conflict is back. After years of relative silence, and mutual ignorance, the young and old are once more at war. With youth unemployment high on the political agenda, the fortunes of the "jobless generation" are being contrasted with those of the "golden generation" of baby boomers, but is one generation really…

  12. Work Values across Generations

    Science.gov (United States)

    Hansen, Jo-Ida C.; Leuty, Melanie E.

    2012-01-01

    Mainstream publication discussions of differences in generational cohorts in the workplace suggest that individuals of more recent generations, such as Generation X and Y, have different work values than do individuals of the Silent and Baby Boom generations. Although extant research suggests that age may influence work values, few of the…

  13. Talkin' 'bout My Generation

    Science.gov (United States)

    Rickes, Persis C.

    2010-01-01

    The monikers are many: (1) "Generation Y"; (2) "Echo Boomers"; (3) "GenMe"; (4) the "Net Generation"; (5) "RenGen"; and (6) "Generation Next". One name that appears to be gaining currency is "Millennials," perhaps as a way to better differentiate the current generation from its…

  14. The Siemens graduate program

    International Nuclear Information System (INIS)

    Schaffler, I.

    2001-01-01

    SIEMENS is an international company acting in various domains: power generation, communication and information, traffic, health...etc. To increase flexibility and activity in a world in constant evolution, the company proposes a graduate program where young people with a special background have the possibility to start an international career in one of the different business areas. This graduate program is also very important in the domain of nuclear energy, where the know-how transfer between the previous generation and the new one is a constant point of interest. (author)

  15. Biopower Program, activities overview

    Energy Technology Data Exchange (ETDEWEB)

    Shepherd, P.

    2000-06-02

    Biomass is a proven option for electricity generation. A diverse range of biopower producers includes electric utilities, independent power producers, and the pulp and paper industry. To help expand opportunities for biomass power production, the U.S. Department of Energy established the Biopower Program and is sponsoring efforts to increase the productivity of dedicated energy crops. The Program aims to double biomass conversion efficiencies, thus reducing biomass power generation costs. These efforts will promote industrial and agricultural growth, improve the environment, create jobs, increase U.S. energy security, and provide new export markets.

  16. NASA's Astrophysics Suborbital Programs

    Science.gov (United States)

    Morse, Jon A.

    2009-01-01

    NASA's Suborbital Programs are the primary engines generating new scientists with the hardware and project management skills needed to lead new space missions. They also allow hands-on student participation in hardware development that is crucial to recruiting and training the next generation of scientists and engineers. They play important roles in the difficult process of migrating bench top technologies to space flight readiness levels, as well as quick migration of cutting-edge technologies to enable a space flight instruments. Initial steps already taken to reinvigorate these programs will be discussed, along with some options for maintaining technical and scientific momentum during times of funding stress.

  17. Next Generation Science Partnerships

    Science.gov (United States)

    Magnusson, J.

    2016-02-01

    I will provide an overview of the Next Generation Science Standards (NGSS) and demonstrate how scientists and educators can use these standards to strengthen and enhance their collaborations. The NGSS are rich in content and practice and provide all students with an internationally-benchmarked science education. Using these state-led standards to guide outreach efforts can help develop and sustain effective and mutually beneficial teacher-researcher partnerships. Aligning outreach with the three dimensions of the standards can help make research relevant for target audiences by intentionally addressing the science practices, cross-cutting concepts, and disciplinary core ideas of the K-12 science curriculum that drives instruction and assessment. Collaborations between researchers and educators that are based on this science framework are more sustainable because they address the needs of both scientists and educators. Educators are better able to utilize science content that aligns with their curriculum. Scientists who learn about the NGSS can better understand the frameworks under which educators work, which can lead to more extensive and focused outreach with teachers as partners. Based on this model, the International Ocean Discovery Program (IODP) develops its education materials in conjunction with scientists and educators to produce accurate, standards-aligned activities and curriculum-based interactions with researchers. I will highlight examples of IODP's current, successful teacher-researcher collaborations that are intentionally aligned with the NGSS.

  18. Gamma ray generator

    Science.gov (United States)

    Firestone, Richard B; Reijonen, Jani

    2014-05-27

    An embodiment of a gamma ray generator includes a neutron generator and a moderator. The moderator is coupled to the neutron generator. The moderator includes a neutron capture material. In operation, the neutron generator produces neutrons and the neutron capture material captures at least some of the neutrons to produces gamma rays. An application of the gamma ray generator is as a source of gamma rays for calibration of gamma ray detectors.

  19. Evaluation and Ranking of Geothermal Resources for Electrical Generation or Electrical Offset in Idaho, Montana, Oregon and Washington. Volume II.

    Energy Technology Data Exchange (ETDEWEB)

    Bloomquist, R. Gordon

    1985-06-01

    This volume contains appendices on: (1) resource assessment - electrical generation computer results; (2) resource assessment summary - direct use computer results; (3) electrical generation (high temperature) resource assessment computer program listing; (4) direct utilization (low temperature) resource assessment computer program listing; (5) electrical generation computer program CENTPLANT and related documentation; (6) electrical generation computer program WELLHEAD and related documentation; (7) direct utilization computer program HEATPLAN and related documentation; (8) electrical generation ranking computer program GEORANK and related documentation; (9) direct utilization ranking computer program GEORANK and related documentation; and (10) life cycle cost analysis computer program and related documentation. (ACR)

  20. Evaluation and ranking of geothermal resources for electrical generation or electrical offset in Idaho, Montana, Oregon and Washington, volume 2

    Science.gov (United States)

    Bloomquist, F. G.

    1985-06-01

    Appendices are given on: (1) resource assessments of electrical generation computer results; (2) a resource assessment summary of direct use computer results; (3) an electrical generation (high temperature) resource assessment computer program listing; (4) a direct utilization (low temperature) resource assessment computer program listing; (5) an electrical generation computer program CENTPLANT and related documentation; (6) an electrical generation computer program WELLHEAD and related documentation; (7) a direct utilization computer program HEATPLAN and related documentation; (8) an electrical generation ranking computer program GEORANK and related documentation; (9) a direct utilization ranking computer program GEORANK and related documentation; and (10) a life cycle cost analysis computer program and related documentation.