WorldWideScience

Sample records for generation munitions handler

  1. Automatic Generation of Safe Handlers for Multi-Task Systems

    OpenAIRE

    Rutten , Éric; Marchand , Hervé

    2004-01-01

    We are interested in the programming of real-time control systems, such as in robotic, automotive or avionic systems. They are designed with multiple tasks, each with multiple modes. It is complex to design task handlers that control the switching of activities in order to insure safety properties of the global system. We propose a model of tasks in terms of transition systems, designed especially with the purpose of applying existing discrete controller synthesis techniques. This provides us...

  2. The Next Generation Munitions Handler Prototype Acquisition Campaign: Targets & Courses of Action

    National Research Council Canada - National Science Library

    Leahy, Michael

    1995-01-01

    ...). This project uses air campaign planning principals to address the development of the technology roadmap and dual use business case study required to transition the ATD into a full-scale prototype...

  3. Industrial Special Wastes Generated in Iowa and Manpower Characteristics of Employee Handlers, Volume I.

    Science.gov (United States)

    Pierce, David R.

    This document, Vol. I in a set, presents information obtained from a survey of industry in Iowa to determine the use and quantities, distribution, and treatment and disposal practices of hazardous waste generators. Additionally, it tabulated the number and manpower characteristics of employees who are in daily contact with such hazardous…

  4. 2008 Munitions Executive Summit

    Science.gov (United States)

    2008-02-21

    Improvement Initiative • Problem : • Ballistic performance • Parts Obsolescence • Producibility Issues • Solution: • Flight telemetry • Results...Reduced Manufacturing Costs, Increased reliability, Better understanding, Reduced complexity, Reduced touch labor, Reduced material costs • SATISFIED...Rocket Motor Demil R&D Technology •Munitions parts make-up: Munitions Items Disposition Action System ( MIDAS ) Training Directorate •Ammunition

  5. Insensitive Munitions Testing

    Data.gov (United States)

    Federal Laboratory Consortium — Insensitive Munitions Testing at RTC is conducted (IAW MILSTD-2105) at Test Area 4. Our engineers and technicians obtain data for hazards classification and safety...

  6. Optimization of Munitions Storage.

    Science.gov (United States)

    1979-12-01

    zones of land around each facility place a significant economic cost on the storage of munitions (Schreyer, 1970: 1). Munitions storage is a subject...ADDTOT, BTOTAL 353 REAL MPH,MW ,MPD, MPU ,4,MPNEW,MCD 354 IF (SW2.NE.0) GO TO 1 355 SW2 - 1 356 WRITE (6,2) 357 GO TO 3 358 1 IF (REC.EQ.0) GO TO 4 359 IF

  7. Munitions Classification Library

    Science.gov (United States)

    2016-04-04

    members of the community to make their own additions to any, or all, of the classification libraries . The next phase entailed data collection over less......Include area code) 04/04/2016 Final Report August 2014 - August 2015 MUNITIONS CLASSIFICATION LIBRARY Mr. Craig Murray, Parsons Dr. Thomas H. Bell, Leidos

  8. Missile/Munition Integration Facility

    Data.gov (United States)

    Federal Laboratory Consortium — A large complex contained within approximately 600 acres with security fencing, controlled access gates, and a munitions convoy access road. The complex is capable...

  9. High-power VCSELs for smart munitions

    Science.gov (United States)

    Geske, Jon; MacDougal, Michael; Cole, Garrett; Snyder, Donald

    2006-08-01

    The next generation of low-cost smart munitions will be capable of autonomously detecting and identifying targets aided partly by the ability to image targets with compact and robust scanning rangefinder and LADAR capabilities. These imaging systems will utilize arrays of high performance, low-cost semiconductor diode lasers capable of achieving high peak powers in pulses ranging from 5 to 25 nanoseconds in duration. Aerius Photonics is developing high-power Vertical-Cavity Surface-Emitting Lasers (VCSELs) to meet the needs of these smart munitions applications. The authors will report the results of Aerius' development program in which peak pulsed powers exceeding 60 Watts were demonstrated from single VCSEL emitters. These compact packaged emitters achieved pulse energies in excess of 1.5 micro-joules with multi kilo-hertz pulse repetition frequencies. The progress of the ongoing effort toward extending this performance to arrays of VCSEL emitters and toward further improving laser slope efficiency will be reported.

  10. Interrupt Handlers in Java

    DEFF Research Database (Denmark)

    Korsholm, Stephan; Schoeberl, Martin; Ravn, Anders Peter

    2008-01-01

    An important part of implementing device drivers is to control the interrupt facilities of the hardware platform and to program interrupt handlers. Current methods for handling interrupts in Java use a server thread waiting for the VM to signal an interrupt occurrence. It means that the interrupt...... is handled at a later time, which has some disadvantages. We present constructs that allow interrupts to be handled directly and not at a later point decided by a scheduler. A desirable feature of our approach is that we do not require a native middleware layer but can handle interrupts entirely with Java...... code. We have implemented our approach using an interpreter and a Java processor, and give an example demonstrating its use....

  11. 7 CFR 984.21 - Handler inventory.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Handler inventory. 984.21 Section 984.21 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Regulating Handling Definitions § 984.21 Handler inventory. Handler inventory as of any date means all...

  12. 7 CFR 1219.9 - First handler.

    Science.gov (United States)

    2010-01-01

    ..., AND INFORMATION Hass Avocado Promotion, Research, and Information Order Definitions § 1219.9 First handler. First handler means a person operating in the Hass avocado marketing system that sells domestic... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS...

  13. 7 CFR 926.8 - Handler.

    Science.gov (United States)

    2010-01-01

    ... of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE DATA COLLECTION, REPORTING AND RECORDKEEPING REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.8 Handler. Handler...

  14. Baggage handler seniority and musculoskeletal symptoms

    DEFF Research Database (Denmark)

    Bern, Stine Hvid; Brauer, Charlotte; Møller, Karina Lauenborg

    2013-01-01

    Heavy lifting is associated with musculoskeletal disorders but it is unclear whether it is related to acute reversible effects or to chronic effects from cumulated exposure. The aim of this study was to examine whether musculoskeletal symptoms in Danish airport baggage handlers were associated wi...... with their seniority as baggage handler, indicating chronic effects from cumulated workload....

  15. 7 CFR 915.120 - Handler registration.

    Science.gov (United States)

    2010-01-01

    ... production area where the avocados will be prepared for market, and name and address of person responsible... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE AVOCADOS GROWN IN SOUTH FLORIDA Rules and Regulations § 915.120 Handler registration. (a) Each handler who desires to handle avocados...

  16. Subacromial shoulder disorders among baggage handlers

    DEFF Research Database (Denmark)

    Thygesen, Lau Caspar; Mikkelsen, Sigurd; Pedersen, Ellen Bøtker

    2016-01-01

    PURPOSE: To assess the influence of cumulative employment as baggage handler on the risk of incident subacromial shoulder disorders. Baggage handling is characterized by repetitive work primarily consisting of heavy lifting in awkward positions and time pressure. METHODS: This cohort study is based...... increased incidence of subacromial shoulder disorders for workers with longer cumulative years of employment. These results support that long-term lifting in awkward positions and time pressure influences the risk of subacromial shoulder disorders....... System. The primary exposure was cumulative years of employment as a baggage handler, and the primary outcome was diagnoses and surgical treatment of subacromial shoulder disorders. RESULTS: The cohort contained 3396 baggage handlers and 63,909 workers in the reference group. Baggage handlers with longer...

  17. The Environmental Challenge of Military Munitions and Federal Facilities

    Science.gov (United States)

    EPA and the Department of Defense (DoD) must address the contamination legacy left by military munitions and explosives of concern (MEC) and other hazardous munitions materials from military live-fire training or testing.

  18. 19 CFR 145.53 - Firearms and munitions of war.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Firearms and munitions of war. 145.53 Section 145.53 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF... munitions of war. Importations of firearms, munitions of war, and related articles are subject to the import...

  19. Defense Industrial Base (DIB): Munitions Realignment for 2020

    Science.gov (United States)

    2013-03-01

    munitions DIB by companies like Coca Cola , Quaker Oats, and Eastman Kodak. As industrial mobilization quickly increased, the requirements decreased...industry and the munitions DIB. This report documented the volatility associated with the production of munitions and financial risks to which

  20. Military Munitions Waste Working Group report

    International Nuclear Information System (INIS)

    1993-01-01

    This report presents the findings of the Military Munitions Waste Working Group in its effort to achieve the goals directed under the Federal Advisory Committee to Develop On-Site Innovative Technologies (DOIT Committee) for environmental restoration and waste management. The Military Munitions Waste Working Group identified the following seven areas of concern associated with the ordnance (energetics) waste stream: unexploded ordnance; stockpiled; disposed -- at known locations, i.e., disposal pits; discharged -- impact areas, unknown disposal sites; contaminated media; chemical sureties/weapons; biological weapons; munitions production; depleted uranium; and rocket motor and fuel disposal (open burn/open detonation). Because of time constraints, the Military Munitions Waste Working Group has focused on unexploded ordnance and contaminated media with the understanding that remaining waste streams will be considered as time permits. Contents of this report are as follows: executive summary; introduction; Military Munitions Waste Working Group charter; description of priority waste stream problems; shortcomings of existing approaches, processes and technologies; innovative approaches, processes and technologies, work force planning, training, and education issues relative to technology development and cleanup; criteria used to identify and screen potential demonstration projects; list of potential candidate demonstration projects for the DOIT committee decision/recommendation and appendices

  1. Military Munitions Waste Working Group report

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-30

    This report presents the findings of the Military Munitions Waste Working Group in its effort to achieve the goals directed under the Federal Advisory Committee to Develop On-Site Innovative Technologies (DOIT Committee) for environmental restoration and waste management. The Military Munitions Waste Working Group identified the following seven areas of concern associated with the ordnance (energetics) waste stream: unexploded ordnance; stockpiled; disposed -- at known locations, i.e., disposal pits; discharged -- impact areas, unknown disposal sites; contaminated media; chemical sureties/weapons; biological weapons; munitions production; depleted uranium; and rocket motor and fuel disposal (open burn/open detonation). Because of time constraints, the Military Munitions Waste Working Group has focused on unexploded ordnance and contaminated media with the understanding that remaining waste streams will be considered as time permits. Contents of this report are as follows: executive summary; introduction; Military Munitions Waste Working Group charter; description of priority waste stream problems; shortcomings of existing approaches, processes and technologies; innovative approaches, processes and technologies, work force planning, training, and education issues relative to technology development and cleanup; criteria used to identify and screen potential demonstration projects; list of potential candidate demonstration projects for the DOIT committee decision/recommendation and appendices.

  2. Code of practice for food handler activities.

    Science.gov (United States)

    Smith, T A; Kanas, R P; McCoubrey, I A; Belton, M E

    2005-08-01

    The food industry regulates various aspects of food handler activities, according to legislation and customer expectations. The purpose of this paper is to provide a code of practice which delineates a set of working standards for food handler hygiene, handwashing, use of protective equipment, wearing of jewellery and body piercing. The code was developed by a working group of occupational physicians with expertise in both food manufacturing and retail, using a risk assessment approach. Views were also obtained from other occupational physicians working within the food industry and the relevant regulatory bodies. The final version of the code (available in full as Supplementary data in Occupational Medicine Online) therefore represents a broad consensus of opinion. The code of practice represents a set of minimum standards for food handler suitability and activities, based on a practical assessment of risk, for application in food businesses. It aims to provide useful working advice to food businesses of all sizes.

  3. Hawaii Munitions Monitoring Station and Natural Laboratory

    Science.gov (United States)

    Edwards, M.; Trimble, A. Z.; Rognstad, M. R.

    2017-12-01

    Hundreds of thousands of tons of conventional munitions were fired into the ocean at military ranges or deliberately disposed at sea during the twentieth century. Potential contaminants from munitions and explosives of concern (MEC) affect virtually every coast in the United States, including Alaska, the Hawaiian Islands, Guam, American Samoa and other U.S. territories as well as inland waterways. It is necessary to develop methods to assess the concentrations of munitions constituents present at a site to address concerns about the presence of environmentally relevant concentrations and their potential impacts. Having a well-characterized site to test instruments and methods is important for continued development and refinement of technology. Most sites are too big to characterize comprehensively in three dimensions over time periods lasting days or longer. We are working to develop a monitoring station and natural laboratory near Oahu, Hawaii to create a cost-effective demonstration and validation natural laboratory where emerging technologies can be evaluated and compared. Ordnance Reef (OR) is an ideal location to establish a munitions monitoring station for historical, logistical and environmental reasons. OR is an area of shallow fringing reef measuring approximately 4.2 km by 2.2 km along the Waianae coast of Oahu that was used as a disposal area for military munitions following World War II. OR has been the subject of multiple investigations including an inventory of munitions conducted by the U.S. Army Corps of Engineers in 2002 and a screening-level risk investigation conducted by the National Oceanic and Atmospheric Administration and the University of Hawaii in 2006. As a result, there are multiple datasets collected over the past fifteen years that can be leveraged to serve as a baseline for the natural laboratory. These extant datasets are being supplemented with data from integrated unmanned systems deployed at OR to characterize and visualize the

  4. 7 CFR 984.71 - Reports of handler inventory.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Reports of handler inventory. 984.71 Section 984.71... Regulating Handling Reports, Books, and Other Records § 984.71 Reports of handler inventory. Each handler... or her inventory of inshell and shelled walnuts. [73 FR 11339, Mar. 3, 2008] ...

  5. 7 CFR 984.471 - Reports of handler inventory.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Reports of handler inventory. 984.471 Section 984.471 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... Administrative Rules and Regulations Reports § 984.471 Reports of handler inventory. Reports of handler inventory...

  6. 20000G shock energy harvesters for gun-fired munition

    International Nuclear Information System (INIS)

    Willemin, J.; Boisseau, S.; Olmos, L.; Gallardo, M.; Despesse, G.; Robert, T.

    2016-01-01

    This paper presents a 20000G shock energy harvester dedicated to gun-fired munitions and based on a mass-spring resonant structure coupled to a coil-magnet electromagnetic converter. The 20000G shock energy is firstly stored in the spring as elastic potential energy, released as mass-spring mechanical oscillations right after the shock and finally converted into electricity thanks to the coil-magnet transducer. The device has been modeled, sized to generate 200mJ in 150ms, manufactured and tested in a gun-fired munition. The prototype sizes 117cm 3 and weighs 370g. 210mJ have been generated in a test bench and 140mJ in real conditions; this corresponds to a mean output power of 0.93W (7.9mW/cm 3 ) and a maximum output power of 4.83W (41.3mW/cm 3 ) right after the shock. (paper)

  7. 20000G shock energy harvesters for gun-fired munition

    Science.gov (United States)

    Willemin, J.; Boisseau, S.; Olmos, L.; Gallardo, M.; Despesse, G.; Robert, T.

    2016-11-01

    This paper presents a 20000G shock energy harvester dedicated to gun-fired munitions and based on a mass-spring resonant structure coupled to a coil-magnet electromagnetic converter. The 20000G shock energy is firstly stored in the spring as elastic potential energy, released as mass-spring mechanical oscillations right after the shock and finally converted into electricity thanks to the coil-magnet transducer. The device has been modeled, sized to generate 200mJ in 150ms, manufactured and tested in a gun-fired munition. The prototype sizes 117cm3 and weighs 370g. 210mJ have been generated in a test bench and 140mJ in real conditions; this corresponds to a mean output power of 0.93W (7.9mW/cm3) and a maximum output power of 4.83W (41.3mW/cm3) right after the shock.

  8. 7 CFR 987.168 - Handler records.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Handler records. 987.168 Section 987.168 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... weight and destination or name and address of the person to whom each shipment was sent; (c) If different...

  9. 7 CFR 1207.512 - Designated handler.

    Science.gov (United States)

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING... shipper, processor, or other person who first places the potatoes in the channels of commerce. A producer... became the first handler of such potatoes. Examples. A cooperative marketing association, or other person...

  10. Variable speed drives boost air handler benefits

    Energy Technology Data Exchange (ETDEWEB)

    Twenty-four separate roof-top air handlers, controlled by variable speed ac motor drives, provide comfort and ventilation for employees at a 500,000 sq. ft. sportswear distribution center in southern Virginia. They were chosen over optional packaged HVAC units because of their flexibility, efficiency, and short payback advantages. The operation of the units is described.

  11. Alarm handler for the advanced photon source control system

    International Nuclear Information System (INIS)

    Kraimer, M.R.; Cha, B.K.; Anderson, M.

    1991-01-01

    The Advanced Photon Source (APS), now under construction at Argonne National Laboratory, will have a control system employing graphics workstations at the operator interface level and VME-based microprocessors operating with a distributed database at the field level. The alarm handler is an application utilizing X-Windows running on one or more operator interface workstations which monitors alarms generated by the VME-based microprocessors. Alarms can be grouped in a hierarchical manner. The operator can monitor, acknowledge, and mask alarms either individually or aggregately. Alarm changes of state and all operator modifications are logged. When alarms occur, display windows are automatically generated conveying system and subsystem relationships and severity. Menus are used to modify the alarm action configuration files and to obtain help. Since alarm groups are defined via an alarm configuration file, the alarm handler is a general purpose application which can be customized to monitor a single subsystem or configured to monitor the entire accelerator complex. 2 refs., 2 figs

  12. Safety and vulnerability simulation of munitions; Modelisation du comportement de munitions en securite et vulnerabilite

    Energy Technology Data Exchange (ETDEWEB)

    Desailly, D.; Briquet, B.; Brunet, P.; Guegant, Y.; Houdusse, D.; Prost, M. [Groupe SNPE Propulsion/ Centre de Recherches du Boucher, 91 - Vert le Petit (France)

    2002-09-01

    Vulnerability of new weapon systems to accidental and hostile environments is a major concern for military operations and many research programs have been so investigated of SNPE Propulsion. Before they were accepted as being safe and suitable for introduction into military inventories systems underwent a wide range of expensive type qualification trials. There was a need therefore, to develop a greater understanding of the reaction mechanisms that affect the behaviour of confined energetic materials when subjected to external stimuli and computer models to control the resulting hazard. As part of this program SNPE Propulsion has developed a method for modelling Cook-off response in order to master the design of insensitive munitions (IM). The behavior of energetic materials when they are submitted to a thermal threat is complex and follows two different time scales: thermochemical processes, counted in minutes even hours whereas pyrotechnic reaction may require a few microseconds. It was shown that the reaction level is ruled by the competition between pressure generated from the cook-off reaction and stress release resulting from break-up confinement. After self-ignition phenomenon and under some confinement and thermal conditions burning can accelerate to deflagration and lead to a deflagration to detonation transition (DDT) event. The method requires'modular tools describing each physical phenomenon. Works have been first focused on the development of experimental facilities to characterise thermal chemical properties and reactivity of thermally damaged energetic material. Consequently the first part of the model describing self-heating and pyrolysis processes has been implemented in an implicit solver. Simulations have shown quite accurate predictions (ignition temperature, time to event) and proved the effectiveness of this approach. Recent developments are.thus concentrated on the numerical modelling of the reaction violence level prediction hence a

  13. Remote Machining and Evaluation of Explosively Filled Munitions

    Data.gov (United States)

    Federal Laboratory Consortium — This facility is used for remote machining of explosively loaded ammunition. Munition sizes from small arms through 8-inch artillery can be accommodated. Sectioning,...

  14. Notes on the Mesh Handler and Mesh Data Conversion

    International Nuclear Information System (INIS)

    Lee, Sang Yong; Park, Chan Eok

    2009-01-01

    At the outset of the development of the thermal-hydraulic code (THC), efforts have been made to utilize the recent technology of the computational fluid dynamics. Among many of them, the unstructured mesh approach was adopted to alleviate the restriction of the grid handling system. As a natural consequence, a mesh handler (MH) has been developed to manipulate the complex mesh data from the mesh generator. The mesh generator, Gambit, was chosen at the beginning of the development of the code. But a new mesh generator, Pointwise, was introduced to get more flexible mesh generation capability. An open source code, Paraview, was chosen as a post processor, which can handle unstructured as well as structured mesh data. Overall data processing system for THC is shown in Figure-1. There are various file formats to save the mesh data in the permanent storage media. A couple of dozen of file formats are found even in the above mentioned programs. A competent mesh handler should have the capability to import or export mesh data as many as possible formats. But, in reality, there are two aspects that make it difficult to achieve the competence. The first aspect to consider is the time and efforts to program the interface code. And the second aspect, which is even more difficult one, is the fact that many mesh data file formats are proprietary information. In this paper, some experience of the development of the format conversion programs will be presented. File formats involved are Gambit neutral format, Ansys-CFX grid file format, VTK legacy file format, Nastran format and CGNS

  15. Chemical Munitions Dumped at Sea near the Hawaiian Islands

    Science.gov (United States)

    Edwards, M.; Bissonnette, M. C.; Briggs, C. W.; Shjegstad, S. M.

    2016-12-01

    Sea disposal was once internationally accepted as an appropriate method for disposal of excess, obsolete, and unserviceable conventional and chemical munitions. The past decade has seen an increase in the number and complexity of studies to assess the effects of historical munitions disposal in the oceans. The Hawai`i Undersea Military Munitions Assessment (HUMMA) is a comprehensive deep-water (300-600 meter) investigation designed to determine the potential impact of sea-disposed munitions on the ocean environment, and vice versa, at a disposal site south of Pearl Harbor, Oahu, Hawaii. Historical records indicated that as many as 16,000 mustard-filled bombs were disposed in this area following World War II. A secondary objective of HUMMA is to determine best practices and technologies for mapping and sampling sea-disposed munitions. The overarching result from five HUMMA field programs conducted over a decade is that the greatest risk from munitions derives from direct contact; there is little evidence that leakage from munitions into the surrounding environment has a direct pathway to affect human health and the impact on the surrounding environment in Hawaii is detectable only at trace levels. This finding should be modulated based on the quantity of physical samples, which were collected around detected at control sites. Both findings support a hypothesis that the impacts of sea-disposed munitions change over time. This presentation will describe the technical approach and results of the 2014 HUMMA field program using Jason 2.

  16. The Mark 3 data base handler

    Science.gov (United States)

    Ryan, J. W.; Ma, C.; Schupler, B. R.

    1980-01-01

    A data base handler which would act to tie Mark 3 system programs together is discussed. The data base handler is written in FORTRAN and is implemented on the Hewlett-Packard 21MX and the IBM 360/91. The system design objectives were to (1) provide for an easily specified method of data interchange among programs, (2) provide for a high level of data integrity, (3) accommodate changing requirments, (4) promote program accountability, (5) provide a single source of program constants, and (6) provide a central point for data archiving. The system consists of two distinct parts: a set of files existing on disk packs and tapes; and a set of utility subroutines which allow users to access the information in these files. Users never directly read or write the files and need not know the details of how the data are formatted in the files. To the users, the storage medium is format free. A user does need to know something about the sequencing of his data in the files but nothing about data in which he has no interest.

  17. Underwater Munitions Expert System: Preliminary Design Report

    Science.gov (United States)

    2015-08-21

    analysis  would  usually  be  performed,   where  separation  by   sieving  results  in  the  PMF  of  sand  grain...locations  they  might  potentially   aggregate .    Furthermore,  given  knowledge  of  the  types  of   munitions...feature  that   Netica  provides  is  the  ability  to  do  sensitivity   analysis ,

  18. Intestinal Parasites among Waste-Handlers in Jos Metropolitan Area ...

    African Journals Online (AJOL)

    Intestinal Parasites among Waste-Handlers in Jos Metropolitan Area of Plateau State, Nigeria. ... Solid waste management is associated with health hazards. ... Waste disposal workers are at high risk of infection with different species of ...

  19. Optimal Control of Sensor Threshold for Autonomous Wide Area Search Munitions

    National Research Council Canada - National Science Library

    Kish, Brian A; Jacques, David R; Pachter, Meir

    2005-01-01

    The optimal employment of autonomous wide area search munitions is addressed. The scenario considered involves an airborne munition searching a battle space for stationary targets in the presence of false targets...

  20. NDIA 2018 IM and EM Technology Symposium: Innovative Insensitive Munition Solutions for Enhanced Warfighter Effectiveness

    Science.gov (United States)

    2018-04-26

    2018 IM & EM TECHNOLOGY SYMPOSIUM INNOVATIVE INSENSITIVE MUNITION SOLUTIONS FOR ENHANCED WARFIGHTER EFFECTIVENESS April 23 – 26, 2018 Doubletree by...IM & EM TECHNOLOGY SYMPOSIUM On behalf of the Insensitive Munitions and Energetic Materials Committee and our MSIAC partner, I would like to...welcome you to the 2018 Insensitive Munitions and Energetic Materials Technology Symposium. This international gathering of the top chemists, system

  1. Sea-dumped CW munitions - the European component

    International Nuclear Information System (INIS)

    Hart, J.; Stock, T.

    2009-01-01

    The purpose of this contribution is to outline the European magnitude of sea-dumped CW munitions. Hereby the paper attempts to provide an overview on historical dumping activities, both for conventional and chemical munitions. The potential dangers which might result from these dumping activities are discussed in brief. Among others the differences in deep sea dumping and dumping in shallow waters are evaluated. Further, the presentation will outline and discuss the different technology steps: (a) identification, (b) recovery, (c) transportation and (d) destruction (on- or off-shore), necessary for possible cleaning of dumping sites. Thereafter an evaluation of the different technologies available/applied is performed, in particular on the destruction part. Hereby the already practised experience is displayed. Based upon existing treaty regimes an actual judgment of possible application of treaty provisions for demanding cleaning up operations is discussed. The question if treaty obligations can be used to force cleaning operations is debated. A possible match of the technology package available with the scope/magnitude of the munitions dumping problem is discussed. Hereby the gaps between the size of the problem and the most suitable technologies for recovery and destruction are illustrated. The resulting answers should be regarded as possible technical guidelines for future development activities as well existing limitations to solve the problems. The papers will result in some general guidelines for future prospect on the issues of dumped munitions, in particular chemical munitions under the European context.(author)

  2. Observations of Munitions Mobility During a Nor'easter at Wallops Island

    Science.gov (United States)

    Swann, C.; Frank, D. P.; Braithwaite, E. F., III; Hagg, R. K.; Calantoni, J.

    2017-12-01

    Unexploded ordnance (or munitions) may migrate, bury, or become exposed over time, and may pose a hazard to both humans and environment. Understanding the behavior of munitions under various wave and current conditions is central to management and remediation of contaminated underwater sites. We embedded Inertial Measurement Units (IMUs) into inert replicas of large caliber munitions (81 mm - 155 mm), herein referred to as `smart munitions'. Several smart munitions were deployed in the field with IMUs logging at 16 Hz continuously. Simultaneously the local hydrodynamic conditions were monitored to correlate any resulting munitions mobility. Here, we present the response of the smart munitions to wave and current conditions observed during a nor'easter off the coast of Wallops Island, Virginia USA in about 10 m water depth. During the nor'easter, peak significant wave heights of 2.8 m were observed in 10 m water depth. Over a roughly 10-hour period, an 81 mm smart munition migrated approximately 206 ft in a net onshore direction. Displacement and heading of the migrated smart munition were estimated by divers during the recovery. Integration of the trajectory of motion for the smart munition using a custom signal processing algorithm was in good agreement with the diver measurements. Discussion will focus on the relationship of the local sediment type and the potential for munitions mobility.

  3. Acoustic Resonance Spectroscopy (ARS) Munition Classification System enhancements. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Vela, O.A.; Huggard, J.C.

    1997-09-18

    Acoustic Resonance Spectroscopy (ARS) is a non-destructive evaluation technology developed at the Los Alamos National Laboratory (LANL). This technology has resulted in three generations of instrumentation, funded by the Defense Special Weapons Agency (DSWA), specifically designed for field identification of chemical weapon (CW) munitions. Each generation of ARS instrumentation was developed with a specific user in mind. The ARS1OO was built for use by the U.N. Inspection Teams going into Iraq immediately after the Persian Gulf War. The ARS200 was built for use in the US-Russia Bilateral Chemical Weapons Treaty (the primary users for this system are the US Onsite Inspection Agency (OSIA) and their Russian counterparts). The ARS300 was built with the requirements of the Organization for the Prohibition of Chemical Weapons (OPCW) in mind. Each successive system is an improved version of the previous system based on learning the weaknesses of each and, coincidentally, on the fact that more time was available to do a requirements analysis and the necessary engineering development. The ARS300 is at a level of development that warrants transferring the technology to a commercial vendor. Since LANL will supply the computer software to the selected vendor, it is possible for LANL to continue to improve the decision algorithms, add features where necessary, and adjust the user interface before the final transfer occurs. This paper describes the current system, ARS system enhancements, and software enhancements. Appendices contain the Operations Manual (software Version 3.01), and two earlier reports on enhancements.

  4. Risk of subacromial shoulder disorder in airport baggage handlers

    DEFF Research Database (Denmark)

    Møller, Sanne Pagh; Brauer, Charlotte; Mikkelsen, Sigurd

    2018-01-01

    age,exposure variables showed close to significant associations with subacromial shoulder disorder.Results could not confirm our hypothesis that combined information on work task duration and shoulder load intensity was stronger associated with subacromial shoulder disorder than seniority.......Musculoskeletal shoulder-load among baggage handlers measured by combining duration and intensity based on biomechanical and epidemiological information may be a stronger predictor of subacromial shoulder disordersthanbaggage handler seniority.In 2012, a cohort of baggage handlers employed...... at Copenhagen Airport in 1990-2012, and a cohort of unskilledotherwise employed men answered a survey.Self-reported information on work tasks during employment in the airport in combination with work task specific biomechanically modelled forces in the shoulder joint was used to estimate shoulder-load. Exposure...

  5. Cluster munitions: public health and international humanitarian law perspectives.

    Science.gov (United States)

    Freckelton, Ian

    2008-02-01

    As a result of civilian deaths in Vietnam, Cambodia, Laos, Chechnya, Kosovo, Afghanistan, Iraq and Lebanon, cluster munitions have been recognised to pose a grave threat to civilian populations because of their limited precision and problematically high rate of initial failure to explode. Efforts are intensifying to ban cluster munitions and to mandate those who have discharged them to defuse them effectively so as to reduce the risks to civilians. This editorial reviews these efforts and identifies a need for them to be actively supported by both the legal and medical communities.

  6. 7 CFR 1205.512 - Collecting handlers and time of collection of $1 per bale assessment.

    Science.gov (United States)

    2010-01-01

    ... consumes domestically or exports cotton of that person's own production shall be the collecting handler for... handler first makes any payment or any credit to the producer's account for the cotton. The handler shall... disbursement based on the Form A loan documents. The producer's copy of the Cotton Producer's Note (Form CCC...

  7. Assisting Handlers Following Attacks on Dog Guides: Implications for Dog Guide Teams

    Science.gov (United States)

    Godley, Cheryl A.; Gillard, Marc A.

    2011-01-01

    Attacks by dogs on dog guides are traumatic for dog guide teams. One variable that affects a team's recovery is how handlers cope with emotional responses to the attack. This article presents a three-stage model for assisting handlers that is useful for handlers and dog guide instructors.

  8. Using waterjet in reverse logistic operations in discarded munitions processing

    Czech Academy of Sciences Publication Activity Database

    Hloch, S.; Tozan, H.; Yagimli, M.; Valíček, Jan; Rokosz, K.

    2011-01-01

    Roč. 18, č. 2 (2011), s. 267-271 ISSN 1330-3651 Institutional research plan: CEZ:AV0Z30860518 Keywords : abrasive waterjet * anti tank bullet * automatic line Subject RIV: JQ - Machines ; Tools Impact factor: 0.347, year: 2011 http://hrcak.srce.hr/search/?q=Using+waterjet+in+reverse+logistic+operations+in+discarded+munitions+processing

  9. REMOTE SENSING IN DETECTING BURIED MUNITIONS FROM WORLD WAR I

    Science.gov (United States)

    During World War I, The American University in Washington D.C. was used by the U.S. Army as an experiment station for the development and testing of a variety of battlefield munitions including chemical weapons such as Mustard Gas, Phosgene, Ricin and Lewisite, among othe...

  10. Underwater Munitions Expert System to Predict Mobility and Burial

    Science.gov (United States)

    2017-11-14

    for predicting the location and possible burial of underwater munitions is required to advise site managers as they plan...that region above the given UXO relative density, which is defined as the UXO density divided by the sand grain density, ( nominally 2650 g...0.0 + 2.5*dsed ; % nominal bed roughness if no burial % (Potentially in future version, ripple height

  11. Computational Modeling of Hydrodynamics and Scour around Underwater Munitions

    Science.gov (United States)

    Liu, X.; Xu, Y.

    2017-12-01

    Munitions deposited in water bodies are a big threat to human health, safety, and environment. It is thus imperative to predict the motion and the resting status of the underwater munitions. A multitude of physical processes are involved, which include turbulent flows, sediment transport, granular material mechanics, 6 degree-of-freedom motion of the munition, and potential liquefaction. A clear understanding of this unique physical setting is currently lacking. Consequently, it is extremely hard to make reliable predictions. In this work, we present the computational modeling of two importance processes, i.e., hydrodynamics and scour, around munition objects. Other physical processes are also considered in our comprehensive model. However, they are not shown in this talk. To properly model the dynamics of the deforming bed and the motion of the object, an immersed boundary method is implemented in the open source CFD package OpenFOAM. Fixed bed and scour cases are simulated and compared with laboratory experiments. The future work of this project will implement the coupling between all the physical processes.

  12. Service life determination of munition during expeditionary missions

    NARCIS (Netherlands)

    Klerk, W.P.C. de; Heijden, A.E.D.M. van der

    2012-01-01

    For a more in-depth understanding of the aging processes of munitions in expeditionary operations, research is performed with respect to the influence of transport, storage and use on the safety of ammunition. Within this programme the influences of parameters like temperature, humidity, vibrations,

  13. [Experience with knowledge development in food handlers with te implementation of Hazard Analysis Critical control points (HACCP) in a hospital food service].

    Science.gov (United States)

    de Sousa, A A; de Salles, R K; Felipe, M R; Tosin, I

    1999-03-01

    The present article has as objective to describe the methodology of an experience of implantation of Hazard Analyses Critical Control Points (HACCP) with food handlers in a hospital food service establishment, inside of a conception of relationship and construction of knowledge. Meetings with the food handlers and nutritionists, with the objective of raising the difficulties poined for the sector and the work to be developed. The HACCP consisted of the evaluation of the operations, following the sequential steps recommended, looking itself to instruct the food handlers on the methods of the operations and its interpretations. The detected critical points, the measures of control, the criteria of correction and the monitoring have widely been argued, serving as didactic elements for the reconstruction of quality of the preparations. The discussions generated actions that were developed in short term, revealing the need of a more effective and continuous partnership for the new proposals.

  14. Sharp Injuries Among Hospital Waste Handlers | Olaitan | Nigerian ...

    African Journals Online (AJOL)

    , C as well as other before commencing on their jobs. Workers should be screened for infective diseases that can be of legal problem while at the job and the workers should be effectively immunized. Key words: sharp injuries, waste, handlers, ...

  15. Design of a 1-chip IBM-3270 protocol handler

    NARCIS (Netherlands)

    Spaanenburg, L.

    1989-01-01

    The single-chip design of a 20MHz IBM-3270 coax protocol handler in a conventional 3 μ CMOS process-technology is discussed. The harmonious combination of CMOS circuit tricks and high-level design disciplines allows the 50k transistor design to be compiled and optimized into a 35 mm**2 chip in 4

  16. Ventilatory Function and Cigarette Smoking in Cement Handlers in ...

    African Journals Online (AJOL)

    Introduction: Occupational exposure to dust and cigarette smoking play important roles in the pathogenesis of lung diseases, particularly in developing countries. To determine the effects of outdoor cement dust exposure and cigarette smoking on lung health, we compared ventilatory function in cement handlers (smokers ...

  17. 7 CFR 930.59 - Handler diversion privilege.

    Science.gov (United States)

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... limited to: (1) Contribution to a Board-approved food bank or other approved charitable organization; (2... of the Board and that the cost of such supervision is to be paid by the handler. Uniform fees for...

  18. Asteroseismology of δ Scuti and γ Doradus Stars Gerald Handler

    Indian Academy of Sciences (India)

    led to the observational detection and identification of a sufficient number ... satellite missions, theoretical advances on mode identification methods, ... The observational borders of the two pulsational instability strips (Rodriguez & Breger 2001; Handler & Shobbrook. 2002), with the thicker lines corresponding to the γ ...

  19. Prevalence of intestinal and urinary parasites among food-handlers ...

    African Journals Online (AJOL)

    53.3%) out of the food handlers harboured parasites of which 3 (10%) had Trichomonas vaginalis in their urine, 1(3.3%) recorded concomitant infection with Entamoeba histolytica, Ascaris lumbricoides and Trichuris trichiura, 5 (16.7%) had ...

  20. ATLAS TDAQ/DCS Event Filter Event Handler Requirements

    CERN Document Server

    Bee, C P; Meessen, C; Qian, Z; Touchard, F; Green, P; Pinfold, J L; Wheeler, S; Negri, A; Scannicchio, D A; Vercesi, V

    2002-01-01

    The second iteration of the Software Development Process of the ATLAS Event Filter has been launched. A summary of the design phase of the first iteration is given in the introduction. The document gives constraints, use cases, functional and non-functional requirements for the Event Handler sub-system of the Event Filter.

  1. 7 CFR 1210.517 - Determination of handler.

    Science.gov (United States)

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING... PROMOTION PLAN Rules and Regulations Assessments § 1210.517 Determination of handler. The producer and... watermelons in the current of commerce. (a) The following examples are provided to aid in the identification...

  2. 7 CFR 1124.10 - Producer-handler.

    Science.gov (United States)

    2010-01-01

    ... or management of, nor has a financial interest in, another handler's operation; nor is any other... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE PACIFIC NORTHWEST MARKETING AREA Order...

  3. 7 CFR 1131.10 - Producer-handler.

    Science.gov (United States)

    2010-01-01

    ... or management of, nor has a financial interest in, another handler's operation; nor is any other... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE ARIZONA MARKETING AREA Order Regulating...

  4. Automated washing of FTA Card punches and PCR setup for reference samples using a LIMS-controlled Sias Xantus automated liquid handler

    DEFF Research Database (Denmark)

    Stangegaard, Michael; Olsen, Addie Nina; Frøslev, Tobias G.

    2009-01-01

    We have implemented and validated automated methods for washing FTA Card punches containing buccal samples and subsequent PCR setup using a Sias Xantus automated liquid handler. The automated methods were controlled by worklists generated by our LabWare Laboratory Information Management System...

  5. Depleted uranium munitions - where are we now?

    International Nuclear Information System (INIS)

    Spratt, Brian G.

    2002-01-01

    There are very different views on the health hazards of DU munitions. Most of the concerns of veterans and their advisors focus on the radiological effects of DU and consequently these are the focus of this editorial. Effects on the kidney and environmental consequences are, however, considered in the second of the Royal Society reports and the main conclusions of both of the reports are outlined in the summary document published in this issue of the journal. The main radiological concerns focus on the irradiation of lung tissues from inhaled DU particles and irradiation resulting from the translocation of inhaled particles to the thoracic lymph nodes.The overwhelming scientific view, presented in the two Royal Society reports and in other independent reviews, is that the main risks of exposure to DU aerosols are an increase in lung cancer and (from chemical toxicity) damage to the kidney, although these are likely to be evident only following substantial intakes. The equivalent doses to the thoracic lymph nodes following inhalation of DU particles are about ten times greater than those to the lung, but the former tissue is considered to be relatively insensitive to radiation-induced cancers. So far, large-scale epidemiological studies of UK and US Gulf War veterans have shown no increase in mortality from cancer, or kidney disease, but these studies need to be continued to see if any significant excess mortality from these causes appears. As mentioned previously, more sensitive epidemiological studies should be possible if groups of soldiers who have known exposures to DU can be identified. Adverse reproductive effects have been observed in rodents exposed to uranium although most of these effects are evident after relatively large daily intakes of uranium. The possibility of effects on reproductive health (from DU or other toxic exposures) is being studied in both UK and US Gulf War veterans. Results from the UK epidemiological study are not yet available but

  6. Validation of Passive Sampling Devices for Monitoring of Munitions Constituents in Underwater Environments

    Science.gov (United States)

    2017-09-01

    TNT TOC TSS Low Order Detonation Munitions constituents Munitions Debris Method Detection Limit Munitions and explosives of concern Mean low...Total organic carbon ( TOC ) and grain size distribution from stations A1, T10, T11, and T12 at BSS...16 syringes/stn) TNT, ADNTs, DNTs, RDX 4 locations in BSS based on positive POCIS results Sediment 5 TOC , grain size 4, co-located with sediment

  7. Munitions in the Underwater Environment: State of the Science and Knowledge Gaps

    Science.gov (United States)

    2010-06-01

    the Munitions Items Disposition Action System ( MIDAS ). Munitions constituents (MCs) can be identified through the known munitions type. The MIDAS and...physical damage to the casing, adjacent or touching metals, and water or substrate qualities such as temperature, pH, or Redox potential. The...environments, little is known on modeling the fate of MCs in the underwater environment. One of the anticipated problems in predicting the fate and

  8. A Wide Area Risk Assessment Framework for Underwater Military Munitions Response

    Science.gov (United States)

    Holland, K. T.; Calantoni, J.

    2017-12-01

    Our objective was to develop a prototype statistical framework supporting Wide Area Assessment and Remedial Investigation decisions relating to the risk of unexploded ordnance and other military munitions concentrated in underwater environments. Decision making involving underwater munitions is inherently complex due to the high degree of uncertainty in the environmental conditions that force munitions responses (burial, decay, migration, etc.) and associated risks to the public. The prototype framework provides a consistent approach to accurately delineating contaminated areas at underwater munitions sites through the estimation of most probable concentrations. We adapted existing deterministic models and environmental data services for use within statistical modules that allowed the estimation of munition concentration given historic site information and environmental attributes. Ultimately this risk surface can be used to evaluate costs associated with various remediation approaches (e.g. removal, monitoring, etc.). Unfortunately, evaluation of the assessment framework was limited due to the lack of enduser data services from munition site managers. Of the 450 U.S. sites identified as having potential contamination with underwater munitions, assessment of available munitions information (including historic firing or disposal records, and recent ground-truth munitions samples) indicated very limited information in the databases. Example data types include the most probable munition types, approximate firing / disposal dates and locations, and any supportive munition survey or sampling results. However the overall technical goal to integrate trained statistical belief networks with detailed geophysical knowledge of sites, of sensors and of the underwater environment was demonstrated and should allow probabilistic estimates of the most likely outcomes and tradeoffs while managing uncertainty associated with military munitions response.

  9. A Cohort Study on Meniscal Lesions among Airport Baggage Handlers

    DEFF Research Database (Denmark)

    Mikkelsen, Sigurd; Brauer, Charlotte; Pedersen, Ellen Bøtker

    2016-01-01

    socioeconomic background and less knee-straining work. Baggage handlers lifted suitcases with an average weight of approximately 15 kg, in total approximately five tonnes during a 9-hour workday. The cohort was followed in the National Patient Register and Civil Registration System. The outcome was a first time......Meniscal lesions are common and may contribute to the development of knee arthrosis. A few case-control and cross-sectional studies have identified knee-straining work as risk factors for meniscal lesions, but exposure-response relations and the role of specific exposures are uncertain...... of unskilled men employed at Copenhagen Airport or in other companies in the metropolitan Copenhagen area from 1990 to 2012 (the Copenhagen Airport Cohort). The cohort at risk included 3,307 airport baggage handlers with heavy lifting and kneeling or squatting work tasks and 63,934 referents with a similar...

  10. Hurdles at work: perceptions of hospital food handlers

    Directory of Open Access Journals (Sweden)

    Sigulem Dirce

    2009-07-01

    Full Text Available Abstract Background Food handlers have a very important role in preventing food contamination during its preparation and distribution. This responsibility is even greater in hospitals, since a large number of patients have low immunity and consequently food contamination by pathogenic bacteria could be particularly harmful. Therefore, a good working environment and periodic training should be provided to food handlers by upper management. Methods This study is qualitative research by means of focus group and thematic content analysis methodologies to examine, in detail, the statements by food handlers working in the milk and specific-diet kitchens in a hospital to understand the problems they face in the workplace. Results We found that food handlers are aware of the role they play in restoring patients' health; they consider it important to offer a good-quality diet. However, according to their perceptions, a number of difficulties prevent them from reaching this aim. These include: upper management not prioritizing human and material resources to the dietetic services when making resource allocation decisions; a perception that upper management considers their work to be of lesser importance; delayed overtime payments; lack of periodic training; managers lacking administrative skills; insufficient dietitian staff assistants, leading to overwork, at the same time as there is an excess of dietitians; unhealthy environmental working conditions – high temperature, high humidity, loud and constant noise level, poor ventilation; lack of food, and kitchen utensils and equipment; and relationship conflicts with chief dieticians and co-workers. Conclusion From these findings, improvement in staff motivation could be achieved by considering non-financial incentives, such as improvement in working conditions and showing appreciation and respect through supervision, training and performance appraisal. Management action, such as investments in

  11. Hurdles at work: perceptions of hospital food handlers.

    Science.gov (United States)

    Bertin, Cilce Helena Figueiredo Preza; Rezende, Magda Andrade; Sigulem, Dirce Maria; Morais, Tania Beninga

    2009-07-24

    Food handlers have a very important role in preventing food contamination during its preparation and distribution. This responsibility is even greater in hospitals, since a large number of patients have low immunity and consequently food contamination by pathogenic bacteria could be particularly harmful. Therefore, a good working environment and periodic training should be provided to food handlers by upper management. This study is qualitative research by means of focus group and thematic content analysis methodologies to examine, in detail, the statements by food handlers working in the milk and specific-diet kitchens in a hospital to understand the problems they face in the workplace. We found that food handlers are aware of the role they play in restoring patients' health; they consider it important to offer a good-quality diet. However, according to their perceptions, a number of difficulties prevent them from reaching this aim. These include: upper management not prioritizing human and material resources to the dietetic services when making resource allocation decisions; a perception that upper management considers their work to be of lesser importance; delayed overtime payments; lack of periodic training; managers lacking administrative skills; insufficient dietitian staff assistants, leading to overwork, at the same time as there is an excess of dietitians; unhealthy environmental working conditions--high temperature, high humidity, loud and constant noise level, poor ventilation; lack of food, and kitchen utensils and equipment; and relationship conflicts with chief dieticians and co-workers. From these findings, improvement in staff motivation could be achieved by considering non-financial incentives, such as improvement in working conditions and showing appreciation and respect through supervision, training and performance appraisal. Management action, such as investments in intermediary management so that managers have the capacity to provide supportive

  12. Strategic Munitions Planning in Non-Conventional Asymmetric Operations

    Science.gov (United States)

    2010-04-01

    Conventional Asymmetric Operations RTO-MP-SAS-081 16 - 3 with a clearly structured, sized and located military force. The principles of Lanchester ...stockpiles and calculated munitions requirements. REFERENCES [1] Prague Summit Declaration, November 2002. [2] J. Fletcher, The Lanchester Legacy... Lanchester battles, Journal of the Operational Research Society, Vol. 50 No. 3, March 1999. [13] W. Freeman, A Study of Ammunition Consumption, Master of

  13. The Political Economy of the Munitions Supply Program

    Science.gov (United States)

    2014-05-01

    advantage in production, and further identified which munitions products can be procured offshore with only limited effects on operational liabilities...comparative advantage and access to global supply chains. A few options exist: fixed-price contracts may be indexed to exogenously-given input prices and... franchisees bid their true costs.47 Third, once supply is forthcoming, the franchisee has an incentive to minimize costs unless the franchiser is known

  14. Trauma-related infections due to cluster munitions.

    Science.gov (United States)

    Fares, Youssef; El-Zaatari, Mohamad; Fares, Jawad; Bedrosian, Nora; Yared, Nadine

    2013-12-01

    Trauma-related infections remain a concerning and potentially avoidable complication of conflict-related injuries. During the Israeli conflict in South Lebanon, more than four million sub-munitions were dropped over South Lebanese soil. In this study, we will explore the different types of infection caused by sub-munitions and penetrating agents. This prospective study took place from 2006 to 2012 at the Lebanese University within the Faculty of Medical Sciences' departments. This study sample consisted of 350 injured casualties. Patients suffered from blast injuries with fragmentations targeting the head, face, torso, abdomen, pelvis and extremities. Of the 350 causalities studied, 326 (93.1%) were males, and 24 (6.9%) were females. Ages varied between 10 and 70 years, with the average age being 27 years. Of the 350 patients studied, 68 (19.4%) developed infections. Infections varied between pseudomonas, Escherichia coli, Candida and fungus and sometimes led to necrosis. Vaccinations, antibiotic therapies and proper wound irrigation must be performed at appropriate emergency units. Excision and complete debridement of necrotic and contaminated tissue should also be performed. The Convention on Cluster Munitions of 2008 should be adhered to, as these weapons indiscriminately and disproportionately harm civilians, thereby violating the well-established international principles governing conflict. Copyright © 2013 King Saud Bin Abdulaziz University for Health Sciences. Published by Elsevier Ltd. All rights reserved.

  15. 40 CFR 266.203 - Standards applicable to the transportation of solid waste military munitions.

    Science.gov (United States)

    2010-07-01

    ... transportation of solid waste military munitions. 266.203 Section 266.203 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR THE MANAGEMENT OF SPECIFIC HAZARDOUS... applicable to the transportation of solid waste military munitions. (a) Criteria for hazardous waste...

  16. 40 CFR 266.205 - Standards applicable to the storage of solid waste military munitions.

    Science.gov (United States)

    2010-07-01

    ... solid waste military munitions. 266.205 Section 266.205 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR THE MANAGEMENT OF SPECIFIC HAZARDOUS... applicable to the storage of solid waste military munitions. (a) Criteria for hazardous waste regulation of...

  17. 28 CFR 0.89 - Authority to seize arms and munitions of war.

    Science.gov (United States)

    2010-07-01

    ... war. 0.89 Section 0.89 Judicial Administration DEPARTMENT OF JUSTICE ORGANIZATION OF THE DEPARTMENT OF JUSTICE Federal Bureau of Investigation § 0.89 Authority to seize arms and munitions of war. The Director... arms and munitions of war, and other articles, pursuant to section 1 of title VI of the act of June 15...

  18. Validation of Passive Sampling Devices for Monitoring of Munitions Constituents in Underwater Environments

    Science.gov (United States)

    2017-06-30

    Research and Development Program [SERDP] project #ER-2542) into the canister would provide enhancement of the quantitative estimation of the TWA...Department of Defense EOD Explosive Ordnance Disposal EPA United States Environmental Protection Agency EQL Environmental Quantitation Limit EST...Laboratory Quantitation Limit MC Munitions Constituents mL Milliliter MR Munitions Response NESDI Navy’s Environmental Security Development to

  19. Hybrid analysis of multiaxis electromagnetic data for discrimination of munitions and explosives of concern

    Science.gov (United States)

    Friedel, M. J.; Asch, T. H.; Oden, C.

    2012-08-01

    The remediation of land containing munitions and explosives of concern, otherwise known as unexploded ordnance, is an ongoing problem facing the U.S. Department of Defense and similar agencies worldwide that have used or are transferring training ranges or munitions disposal areas to civilian control. The expense associated with cleanup of land previously used for military training and war provides impetus for research towards enhanced discrimination of buried unexploded ordnance. Towards reducing that expense, a multiaxis electromagnetic induction data collection and software system, called ALLTEM, was designed and tested with support from the U.S. Department of Defense Environmental Security Technology Certification Program. ALLTEM is an on-time time-domain system that uses a continuous triangle-wave excitation to measure the target-step response rather than traditional impulse response. The system cycles through three orthogonal transmitting loops and records a total of 19 different transmitting and receiving loop combinations with a nominal spatial data sampling interval of 20 cm. Recorded data are pre-processed and then used in a hybrid discrimination scheme involving both data-driven and numerical classification techniques. The data-driven classification scheme is accomplished in three steps. First, field observations are used to train a type of unsupervised artificial neural network, a self-organizing map (SOM). Second, the SOM is used to simultaneously estimate target parameters (depth, azimuth, inclination, item type and weight) by iterative minimization of the topographic error vectors. Third, the target classification is accomplished by evaluating histograms of the estimated parameters. The numerical classification scheme is also accomplished in three steps. First, the Biot-Savart law is used to model the primary magnetic fields from the transmitter coils and the secondary magnetic fields generated by currents induced in the target materials in the

  20. Hybrid analysis of multiaxis electromagnetic data for discrimination of munitions and explosives of concern

    Science.gov (United States)

    Friedel, M.J.; Asch, T.H.; Oden, C.

    2012-01-01

    The remediation of land containing munitions and explosives of concern, otherwise known as unexploded ordnance, is an ongoing problem facing the U.S. Department of Defense and similar agencies worldwide that have used or are transferring training ranges or munitions disposal areas to civilian control. The expense associated with cleanup of land previously used for military training and war provides impetus for research towards enhanced discrimination of buried unexploded ordnance. Towards reducing that expense, a multiaxis electromagnetic induction data collection and software system, called ALLTEM, was designed and tested with support from the U.S. Department of Defense Environmental Security Technology Certification Program. ALLTEM is an on-time time-domain system that uses a continuous triangle-wave excitation to measure the target-step response rather than traditional impulse response. The system cycles through three orthogonal transmitting loops and records a total of 19 different transmitting and receiving loop combinations with a nominal spatial data sampling interval of 20 cm. Recorded data are pre-processed and then used in a hybrid discrimination scheme involving both data-driven and numerical classification techniques. The data-driven classification scheme is accomplished in three steps. First, field observations are used to train a type of unsupervised artificial neural network, a self-organizing map (SOM). Second, the SOM is used to simultaneously estimate target parameters (depth, azimuth, inclination, item type and weight) by iterative minimization of the topographic error vectors. Third, the target classification is accomplished by evaluating histograms of the estimated parameters. The numerical classification scheme is also accomplished in three steps. First, the Biot–Savart law is used to model the primary magnetic fields from the transmitter coils and the secondary magnetic fields generated by currents induced in the target materials in the

  1. Salmonella serotypeTyphi, Shigella, and intestinal parasites among food handlers at Bahir Dar University, Ethiopia.

    Science.gov (United States)

    Abera, Bayeh; Yitayew, Gashaw; Amare, Hiwot

    2016-02-28

    Food handlers play a major role in the transmission of Salmonella serotype Typhi (S. Typhi), Shigella, and intestinal parasites. This study was conducted to determine the prevalence of S. Typhi, Shigella, and intestinal parasites among food handlers at Bahir Dar University, Ethiopia. A cross-sectional study was conducted in June 2014. Stool samples from 410 food handlers were examined for bacterial pathogens and parasites. Pearson's Chi-square test, Fisher's exact test, and bivariate and multivariate logistic regression analyses were used where appropriate. The prevalence of S. Typhi, Shigella, and intestinal parasites among food handlers was 11 (2.7%), 5 (1.2%), and 53 (12.9%), respectively. Among eight intestinal parasites identified, the two most prevalent intestinal parasites were hookworm 26 (6.3%) and G. lamblia 13 (3.1%). Male food handlers were more likely to be positive than were female food handlers for S. Typhi and intestinal parasites. Furthermore, food handlers who had a history of regular medical checkups were less infected with intestinal parasites. Being male (AOR: 2.1, 95% CI: 1.2, 4.4) and not attending medical checkups (AOR: 2.9, 95% CI: 1.4, 6.1) were independent predictors of intestinal parasitic infection in food handlers. Male food handlers were reluctant to have regular parasitological examinations. There was a high proportion of food handlers with S. Typhi, Shigella, and intestinal parasites in their faces. Special emphasis should be placed on S. Typhicarriers and male food handlers. Education and periodical medical checkups for intestinal parasites and S. Typhi should be considered as intervention measures.

  2. Epidemiology of injury among handlers and dogs competing in the sport of agility.

    Science.gov (United States)

    Kerr, Zachary Y; Fields, Sarah; Comstock, R Dawn

    2014-07-01

    Little is known about the epidemiology of dog sport-related injuries. This study examines injuries among handlers and dogs in the sport of dog agility. A cross-sectional pilot study captured data on demographics, exposures, and injury for a sample of agility handlers and dogs. Logistic regressions predicted odds of injury. Survey of 217 handlers and 431 dogs identified 31 handler injuries (1.55 training injuries per 1000 hours, 2.14 competition injuries per 1000 runs) and 38 dog injuries (1.74 training injuries per 1000 hours, 1.72 competition injuries per 1000 runs). Handlers most commonly injured knees (48.4%) and lower trunk (29.0%). Most common diagnoses were strains (51.6%) and sprains (32.3%). Obese handlers had increased odds of injury compared with normal weight handlers (OR = 5.5, P Dogs most commonly injured front paws (23.7%) and shoulders (15.8%). Most common diagnoses were strains (44.7%) and cut/scrapes (21.1%). Injury was positively associated with dog's age (P benefits, dog agility poses a risk of injury to both handlers and dogs. Future research on specific mechanisms of injury should drive evidence-based injury prevention strategies.

  3. Risk factors for episodes of enteric disease in cattle wastes handlers in Tanzania

    DEFF Research Database (Denmark)

    Madoshi, B; Lupindu, A. M.; Mtambo, MMA

    2017-01-01

    of handlers who were aware of risks of acquiring enteric episodes in animal waste handlers was low (43.6 %. There was limited awareness of government guideline on handling such wastes (3.2%) and washing hands without soap was found to be the most common health measures taken after handling animal wastes (70...

  4. Dog handlers' and dogs' emotional and cortisol secretion responses associated with animal-assisted therapy sessions

    NARCIS (Netherlands)

    Haubenhofer, D.K.; Kirchengast, S.

    2007-01-01

    The study investigated 13 dog handlers and 18 companion dogs (Canis familiaris) working as teams in nonhuman animal-assisted service. The handlers described in questionnaires what emotions they chose to associate with their daily life and therapeutic work. They described their emotional condition

  5. Knowledge, attitudes and practices of food handlers in food safety: An integrative review.

    Science.gov (United States)

    Zanin, Laís Mariano; da Cunha, Diogo Thimoteo; de Rosso, Veridiana Vera; Capriles, Vanessa Dias; Stedefeldt, Elke

    2017-10-01

    This study presents an overview of the relationship between knowledge, attitudes and practices (KAP) of food handlers with training in food safety, in addition to proposing reflections on the training of food handlers, considering its responsibility for food safety and health of consumers. The review was based on the integrative method. The descriptors used were: (food handler), (knowledge, attitudes and practice) and (training). Six databases were searched, 253 articles were consulted and 36 original articles were included. Fifty per cent of the articles pointed that there was no proper translation of knowledge into attitudes/practices or attitudes into practices after training. Knowledge, attitudes and practices of food handlers are important for identifying how efficient training in food safety is allowing prioritize actions in planning training. The evaluation of KAP is the first step to understand the food handler's point of view. After this evaluation other diagnostic strategies become necessary to enhance this understanding. Copyright © 2017. Published by Elsevier Ltd.

  6. Spread, Behavior, and Ecosystem Consequences of Conventional Munitions Compounds in Coastal Marine Waters

    Directory of Open Access Journals (Sweden)

    Aaron J. Beck

    2018-04-01

    Full Text Available Coastal marine environments are contaminated globally with a vast quantity of unexploded ordnance and munitions from intentional disposal. These munitions contain organic explosive compounds as well as a variety of metals, and represent point sources of chemical pollution to marine waters. Most underwater munitions originate from World Wars at the beginning of the twentieth century, and metal munitions housings have been impacted by extensive corrosion over the course of the following decades. As a result, the risk of munitions-related contaminant release to the water column is increasing. The behavior of munitions compounds is well-characterized in terrestrial systems and groundwater, but is only poorly understood in marine systems. Organic explosive compounds, primarily nitroaromatics and nitramines, can be degraded or transformed by a variety of biotic and abiotic mechanisms. These reaction products exhibit a range in biogeochemical characteristics such as sorption by particles and sediments, and variable environmental behavior as a result. The reaction products often exhibit increased toxicity to biological receptors and geochemical controls like sorption can limit this exposure. Environmental samples typically show low concentrations of munitions compounds in water and sediments (on the order of ng/L and μg/kg, respectively, and ecological risk appears generally low. Nonetheless, recent work demonstrates the possibility of sub-lethal genetic and metabolic effects. This review evaluates the state of knowledge on the occurrence, fate, and effect of munition-related chemical contaminants in the marine environment. There remain a number of knowledge gaps that limit our understanding of munitions-related contaminant spread and effect, and the need for additional work is made all the more urgent by increasing risk of release to the environment.

  7. PREVALENCE OF INTESTINAL PARASITES AMONG FOOD HANDLERS IN WESTERN IRAN

    Directory of Open Access Journals (Sweden)

    Farnaz Kheirandish

    2014-04-01

    Full Text Available Parasitic infection is one of the problems that affect human health, especially in developing countries. In this study, all of the fast food shops, restaurants, and roast meat outlets of Khorramabad (Western Iran and all the staff employed by them, some 210 people, were selected through a census and their stools were examined for the presence of parasites. The parasitological tests of direct wet-mount, Lugol's iodine staining, formaldehyde-ether sedimentation and Trichrome staining techniques were performed on the samples. The data was analyzed with a chi-square test and logistic regression was selected as the analytical model. The results showed 19 (9% stool specimens were positive for different intestinal parasites. These intestinal parasites included Giardia lamblia2.9%, Entamoeba coli 4.3%, Blastocystis sp. 1.4%, and Hymenolepis nana 0.5%. There was a significant difference between the presence of a valid health card, awareness of transmission of intestinal parasites, participation in training courses in environmental health with intestinal parasites (p 0.05. To control parasitic infection in food handlers, several strategies are recommended such as stool examinations every three months, public education, application of health regulations, controlling the validity of health cards and training on parasitic infection transmission. In this regard, the findings of the present study can be used as a basis to develop preventive programs targeting food handlers because the spread of disease via them is a common problem worldwide.

  8. Prevalence of intestinal parasites among food handlers in Western Iran.

    Science.gov (United States)

    Kheirandish, Farnaz; Tarahi, Mohammad Javad; Ezatpour, Behrouz

    2014-01-01

    Parasitic infection is one of the problems that affect human health, especially in developing countries. In this study, all of the fast food shops, restaurants, and roast meat outlets of Khorramabad (Western Iran) and all the staff employed by them, some 210 people, were selected through a census and their stools were examined for the presence of parasites. The parasitological tests of direct wet-mount, Lugol's iodine staining, formaldehyde-ether sedimentation and Trichrome staining techniques were performed on the samples. The data was analyzed with a chi-square test and logistic regression was selected as the analytical model. The results showed 19 (9%) stool specimens were positive for different intestinal parasites. These intestinal parasites included Giardia lamblia 2.9%, Entamoeba coli 4.3%, Blastocystis sp. 1.4%, and Hymenolepis nana 0.5%. There was a significant difference between the presence of a valid health card, awareness of transmission of intestinal parasites, participation in training courses in environmental health with intestinal parasites (p 0.05). To control parasitic infection in food handlers, several strategies are recommended such as stool examinations every three months, public education, application of health regulations, controlling the validity of health cards and training on parasitic infection transmission. In this regard, the findings of the present study can be used as a basis to develop preventive programs targeting food handlers because the spread of disease via them is a common problem worldwide.

  9. Biomarkers of Sensitivity and Exposure in Washington State Pesticide Handlers

    Science.gov (United States)

    Keifer, M.C.; Checkoway, H.; De Roos, A.J.; Farin, F.M.; Fenske, R.A.; Richter, R.J.; van Belle, G.; Furlong, C.E.

    2011-01-01

    Organophosphate (OP) and N-methyl-carbamate (CB) insecticides are widely used in agriculture in the US and abroad. These compounds – which inhibit acetylcholinesterase (AChE) enzyme activity – continue to be responsible for a high proportion of pesticide poisonings among US agricultural workers. It is possible that some individuals may be especially susceptible to health effects related to OP/CB exposure. The paraoxonase (PON1) enzyme metabolizes the highly toxic oxon forms of some OPs, and an individual's PON1 status may be an important determinant of his or her sensitivity to these chemicals. This chapter discusses methods used to characterize individual PON1 status and reviews previous epidemiologic studies that have evaluated PON1-related sensitivity to OPs in relation to various health endpoints. It also describes an ongoing longitudinal study among OP-exposed agricultural pesticide handlers who are participating in a recently implemented cholinesterase monitoring program in Washington State. This study will evaluate handlers' PON1 status as a hypothesized determinant of butyrylcholinesterase (BuChE) inhibition. Such studies will be useful to determine how regulatory risk assessments might account for differences in PON1-related OP sensitivity when characterizing inter-individual variability in risk related to OP exposure. Recent work assessing newer and more sensitive biomarkers of OP exposure is also discussed briefly in this chapter. PMID:20221867

  10. Depleted uranium instead of lead in munitions: the lesser evil.

    Science.gov (United States)

    Jargin, Sergei V

    2014-03-01

    Uranium has many similarities to lead in its exposure mechanisms, metabolism and target organs. However, lead is more toxic, which is reflected in the threshold limit values. The main potential hazard associated with depleted uranium is inhalation of the aerosols created when a projectile hits an armoured target. A person can be exposed to lead in similar ways. Accidental dangerous exposures can result from contact with both substances. Encountering uranium fragments is of minor significance because of the low penetration depth of alpha particles emitted by uranium: they are unable to penetrate even the superficial keratin layer of human skin. An additional cancer risk attributable to the uranium exposure might be significant only in case of prolonged contact of the contaminant with susceptible tissues. Lead intoxication can be observed in the wounded, in workers manufacturing munitions etc; moreover, lead has been documented to have a negative impact on the intellectual function of children at very low blood concentrations. It is concluded on the basis of the literature overview that replacement of lead by depleted uranium in munitions would be environmentally beneficial or largely insignificant because both lead and uranium are present in the environment.

  11. Depleted uranium instead of lead in munitions: the lesser evil

    International Nuclear Information System (INIS)

    Jargin, Sergei V

    2014-01-01

    Uranium has many similarities to lead in its exposure mechanisms, metabolism and target organs. However, lead is more toxic, which is reflected in the threshold limit values. The main potential hazard associated with depleted uranium is inhalation of the aerosols created when a projectile hits an armoured target. A person can be exposed to lead in similar ways. Accidental dangerous exposures can result from contact with both substances. Encountering uranium fragments is of minor significance because of the low penetration depth of alpha particles emitted by uranium: they are unable to penetrate even the superficial keratin layer of human skin. An additional cancer risk attributable to the uranium exposure might be significant only in case of prolonged contact of the contaminant with susceptible tissues. Lead intoxication can be observed in the wounded, in workers manufacturing munitions etc; moreover, lead has been documented to have a negative impact on the intellectual function of children at very low blood concentrations. It is concluded on the basis of the literature overview that replacement of lead by depleted uranium in munitions would be environmentally beneficial or largely insignificant because both lead and uranium are present in the environment. (opinion)

  12. Sex differences in the herding styles of working sheepdogs and their handlers.

    Directory of Open Access Journals (Sweden)

    Erin Kydd

    Full Text Available Working sheepdog trials test the attributes of dogs as well as the dogmanship and stockmanship skills of handlers. They generally include standard elements such as outrun, lift, fetch, drive, shed, pen and single to test all facets of the work that dogs perform on a farm. While both male and female handlers participate, these trials are traditionally dominated by male handlers. Both male and female dogs compete on equal terms within the same events. Drawing data from files (n = 60 downloaded from YouTube, the current study explores whether behaviours of dogs and their handlers during sheepdog trials differ between handler gender and dog sex at different levels of competition. It compared the stalking, crouching, chasing and stationary behaviours of dogs in open (n = 28 dogs: 10 females, 18 males and not-open trials (n = 32 dogs: 20 females, 12 males. The dogs in this study had male (n = 38 and female (n = 22 handlers, whose movement and use of vocal cues and arm elevations were also compared. However, the small sample size and limitations of these videos as a data source should be noted before the results are generalised to the broader field of working-dog behaviour. The results of an REstricted Maximum Likelihood test showed that male handlers spent, on average, significantly more time in the fetch and drive elements than female handlers, but this difference between sexes was present only in not-open events (mean time to Fetch, female handler = 44.07s, male handler = 124.00s, P<0.001, mean time to Drive, female handler = 95.8s, male handler = 152.4, P = 0.010. This may suggest that female handlers of less experienced dogs are better at the early training of these elements. The results showed that male dogs spent more time stationary than female dogs, but only in open competition (male dog predicted mean 6.17s, P = 0.014. Revealing differences between men/women, and between dogs/bitches in this context may identify pairings that complement each

  13. Optimization of Intelligent Munition Warfare Using Agent-Based Simulation Software and Design of Experiments Methodology

    National Research Council Canada - National Science Library

    Floersheim, Bruce; Hou, Gene

    2006-01-01

    ... mechanism for a number of vehicles caught in the killzone. Thus, it is useful to study and attempt to model through equations and simulation the interaction between enemy agents and these new munitions...

  14. National Security Strategy and the Munitions' Paradox: Self-Sufficiency or Maximum Efficiency

    National Research Council Canada - National Science Library

    McChesney, Michael

    1998-01-01

    ... that the United States military strategy may not be credible to likely regional aggressors. Conversely, DoD acquisition leadership believes industry consolidation should continue and the munitions base should be expanded to include US allies...

  15. Role of Food Handlers in Norovirus Outbreaks in London and South East England, 2013 to 2015.

    Science.gov (United States)

    Rumble, C; Addiman, S; Balasegaram, S; Chima, K; Ready, D; Heard, J; Alexander, E

    2017-02-01

    Outbreaks caused by norovirus infection are common and occur throughout the year. Outbreaks can be related to food outlets either through a contaminated food source or an infected food handler. Both asymptomatic and symptomatic food handlers are potentially implicated in outbreaks, but evidence of transmission is limited. To understand potential food handler transmission in outbreak scenarios, epidemiological and microbiological data on possible and confirmed norovirus outbreaks reported in London and South East England in a 2-year period were reviewed. One hundred eighty-six outbreaks were associated with a food outlet or registered caterer in this period. These occurred throughout the year with peaks in quarter 1 of study years. A case series of 17 outbreaks investigated by the local field epidemiological service were evaluated further, representing more than 606 cases. In five outbreaks, symptomatic food handlers were tested and found positive for norovirus. In four outbreaks, symptomatic food handlers were not tested. Asymptomatic food handlers were tested in three outbreaks but positive for norovirus in one only. Environmental sampling did not identify the causative agent conclusively in any of the outbreaks included in this analysis. Food sampling identified norovirus in one outbreak. Recommendations from this study include for outbreak investigations to encourage testing of symptomatic food handlers and for food and environmental samples to be taken as soon as possible. In addition, sampling of asymptomatic food handlers should be considered when possible. However, in light of the complexity in conclusively identifying a source of infection, general measures to improve hand hygiene are recommended, with specific education among food handlers about the potential for foodborne pathogen transmission during asymptomatic infection, as well as reinforcing the importance of self-exclusion from food handling activities when symptomatic.

  16. Effect of frying instructions for food handlers on acrylamide concentration in French fries: an explorative study.

    Science.gov (United States)

    Sanny, M; Luning, P A; Jinap, S; Bakker, E J; van Boekel, M A J S

    2013-03-01

    The objective of this study was to obtain insight into the effect of frying instructions on food handlers' control decisions in restaurants and to investigate the impact of control decisions on the variation and concentration of acrylamide in French fries. The concentrations of acrylamide and reducing sugars were analyzed, the frying temperature and time were measured, and thawing practices were observed. The results obtained before and after instructions were provided to the food handlers were compared for restaurants as a group and for each restaurant. Frying instructions supported food handlers' decisions to start frying when the oil temperature reached 175°C; all handlers started frying at the correct temperature. However, the effect of the instructions on the food handlers' decisions for frying time differed; most handlers increased the frying time beyond 240 s to achieve crispier French fries with a final color dictated by their preference. Providing instructions did not result in a significant difference in the mean concentration of acrylamide in French fries for the restaurants as a group. However, data analyzed for each restaurant revealed that when food handlers properly followed the instructions, the mean concentration of acrylamide was significantly lower (169 μg/kg) than that before instructions were provided (1,517 μg/kg). When food handlers did not complying with the frying instructions, mean acrylamide concentrations were even higher than those before instructions were provided. Two different strategies were developed to overcome the noncompliant behavior of food handlers: establishing requirements for the features of commercial fryers and strict monitoring of compliance with instructions.

  17. Device Configuration Handler for Accelerator Control Applications at Jefferson Lab

    International Nuclear Information System (INIS)

    Bickley, Matt; Chevtsov, P.; Larrieu, T.

    2003-01-01

    The accelerator control system at Jefferson Lab uses hundreds of physical devices with such popular instrument bus interfaces as Industry Pack (IPAC), GPIB, RS-232, etc. To properly handle all these components, control computers (IOCs) must be provided with the correct information about the unique memory addresses of the used interface cards, interrupt numbers (if any), data communication channels and protocols. In these conditions, the registration of a new control device in the control system is not an easy task for software developers. Because the device configuration is distributed, it requires the detailed knowledge about not only the new device but also the configuration of all other devices on the existing system. A configuration handler implemented at Jefferson Lab centralizes the information about all control devices making their registration user-friendly and very easy to use. It consists of a device driver framework and the device registration software developed on the basis of ORACLE database and freely available scripting tools (perl, php)

  18. U.S. Army Training and Testing Area Carrying Capacity (ATTACC) for Munitions (AFM)

    Science.gov (United States)

    2006-11-01

    Army Training Support Center USDA United States Department of Agriculture USGS United States Geological Survey USLE Universal Soil Loss Equation...Range condition is a function of climate, soil , and hydrology. The munitions impact, constituent load, and range condition are modeled using AFM...For ArcGIS v2 to attain expected concentrations of munitions constituents and corresponding risk due to exposure through soil - and water-related

  19. Bioinspired polarization navigation sensor for autonomous munitions systems

    Science.gov (United States)

    Giakos, G. C.; Quang, T.; Farrahi, T.; Deshpande, A.; Narayan, C.; Shrestha, S.; Li, Y.; Agarwal, M.

    2013-05-01

    Small unmanned aerial vehicles UAVs (SUAVs), micro air vehicles (MAVs), Automated Target Recognition (ATR), and munitions guidance, require extreme operational agility and robustness which can be partially offset by efficient bioinspired imaging sensor designs capable to provide enhanced guidance, navigation and control capabilities (GNC). Bioinspired-based imaging technology can be proved useful either for long-distance surveillance of targets in a cluttered environment, or at close distances limited by space surroundings and obstructions. The purpose of this study is to explore the phenomenology of image formation by different insect eye architectures, which would directly benefit the areas of defense and security, on the following four distinct areas: a) fabrication of the bioinspired sensor b) optical architecture, c) topology, and d) artificial intelligence. The outcome of this study indicates that bioinspired imaging can impact the areas of defense and security significantly by dedicated designs fitting into different combat scenarios and applications.

  20. The health hazards of depleted uranium munitions. Part 1

    International Nuclear Information System (INIS)

    2001-01-01

    Depleted uranium is a toxic and weakly radioactive metal used for a variety of purposes. Perhaps its most controversial use is in battlefield munitions, where it can be widely dispersed in the form of fine particles and shrapnel that may enter the bodies of combatants and others through inhalation, ingestion or wounding. It is a matter of legitimate public concern whether the use of this material in this way could create unacceptable health hazards or damage to the environment. The objective of our study has been to provide the best scientific understanding of the ways in which the material may be distributed, how it may be taken up by humans, and the potential implications for health. For politicians, any hazards to health have to be balanced against the military advantages that the use of these munitions confers. We have not tried to reach a judgment on these political issues, but we believe that a better scientific understanding of the extent of the hazards will make it easier for these wider questions to be addressed in a more objective way. This report is the first of two, and addresses the likely levels of exposure to depleted uranium, the resulting radiological risks, and the lessons to be learned from epidemiological studies. Our second report will address toxicological risks and environmental issues. So far, we conclude that risks from radiation are low for most soldiers on the battlefield, and for civilians who later return to the area. However, there are uncertainties about the maximal levels of exposure to depleted uranium on the battlefield, and there may be circumstances in which a few soldiers are exposed to levels of depleted uranium that result in a significant risk to health. Further studies are needed to determine the levels of exposure to depleted uranium that might occur on the battlefield and to judge whether such higher risks are likely to occur in practice

  1. [Cryptosporidium sp infections and other intestinal parasites in food handlers from Zulia state, Venezuela].

    Science.gov (United States)

    Freites, Azael; Colmenares, Deisy; Pérez, Marly; García, María; Díaz de Suárez, Odelis

    2009-03-01

    Cryptosporidiosis in food handlers from Venezuela is unknown, being this an important public health problem in immunosuppressed patients. To determine the prevalence of Cryptosporidium sp and other intestinal parasites in food handlers from Zulia State, one hundred nineteen fecal samples were evaluated by wet mount, concentrated according to Ritchie and modified Ziehl-Neelsen staining. Fourteen (11.8%) were positive for Cryptosporidium sp and associated with other protozoosis (P Entamoeba coli (17.6%). The most frequent pathogenic protozoa was Giardia lamblia (13.4%), followed by the complex Entamoeba histolytica/E. dispar (9.2%). 4.1% were positive for intestinal helminthes. The infection by Cryptosporidium sp is frequent in food handlers from Zulia State. Given to the results of this investigation and the nonexistence of studies in this population, is necessary to deepen in the impact of this parasitism in food handlers and the consumers of their products.

  2. Kitchen safety in hospitals: practices and knowledge of food handlers in istanbul, Turkey.

    Science.gov (United States)

    Ercan, Aydan; Kiziltan, Gul

    2014-10-01

    This study was designed to identify the practices and knowledge of food handlers about workplace safety in hospital kitchens (four on-premises and eight off-premises) in Istanbul. A kitchen safety knowledge questionnaire was administered and a kitchen safety checklist was completed by dietitians. The mean total scores of the on-premise and off-premise hospital kitchens were 32.7 ± 8.73 and 37.0 ± 9.87, respectively. The mean scores for the items about machinery tools, electricity, gas, and fire were lower in off-premise than on-premise hospital kitchen workers. The kitchen safety knowledge questionnaire had five subsections; 43.7% of the food handlers achieved a perfect score. Significant differences were found in the knowledge of food handlers working in both settings about preventing slips and falls (p kitchen safety knowledge of the food handlers (p < .05). Copyright 2014, SLACK Incorporated.

  3. PREVALENCE OF INTESTINAL PARASITES AMONG FOOD HANDLERS OF SARI, NORTHERN IRAN

    Directory of Open Access Journals (Sweden)

    Mehdi SHARIF

    2015-04-01

    Full Text Available Parasitic infection is highly prevalent throughout the developing countries of the world. Food handlers are a potential source of infection for many intestinal parasites and other enteropathogenic infections as well. The aim of this study was to determine the prevalence of intestinal parasite carriers among food handlers attending the public health center laboratory in Sari, Northern Iran for annual check-up. The study was performed from August 2011 through February 2012. Stool samples were collected from 1041 male and female food handlers of different jobs aged between 18 to 63 years and were examined following standard procedures. Sociodemographic, environmental and behavioral data analysis of the food handlers were recorded in a separate questionnaire. Intestinal parasites were found in 161 (15.5% of the studied samples. Seven species of protozoan or helminth infections were detected. Most of the participants were infected with Giardia lamblia (53.9% followed by Blastocystis hominis (18%, Entamoeba coli (15.5%, Entamoeba histolytica/dispar (5.5%, Cryptosporidium sp. (3.1%, Iodamoeba butschlii (3.1% and Hymenolepis nana (1.9% as the only helminth infection. The findings emphasized that food handlers with different pathogenic organisms may predispose consumers to significant health risks. Routine screening and treatment of food handlers is a proper tool in preventing food-borne infections.

  4. Serological evidence of hepatitis E virus infection in pigs and jaundice among pig handlers in Bangladesh.

    Science.gov (United States)

    Haider, N; Khan, M S U; Hossain, M B; Sazzad, H M S; Rahman, M Z; Ahmed, F; Zeidner, N S

    2017-11-01

    Hepatitis E virus (HEV) is the most common cause of viral hepatitis in humans. Pigs may act as a reservoir of HEV, and pig handlers were frequently identified with a higher prevalence of antibodies to HEV. The objectives of this study were to identify evidence of HEV infection in pigs and compare the history of jaundice between pig handlers and people not exposed to pigs and pork. Blood and faecal samples were collected from 100 pigs derived from three slaughterhouses in the Gazipur district of Bangladesh from January to June, 2011. We also interviewed 200 pig handlers and 250 non-exposed people who did not eat pork or handled pigs in the past 2 years. We tested the pig sera for HEV-specific antibodies using a competitive ELISA and pig faecal samples for HEV RNA using real-time RT-PCR. Of 100 pig sera, 82% (n = 82) had detectable antibody against HEV. Of the 200 pig handlers, 28% (56/200) demonstrated jaundice within the past 2 years, whereas only 17% (43/250) of controls had a history of jaundice (p Bangladesh demonstrated evidence of HEV infection, and a history of jaundice was significantly more frequent in pig handlers. Identifying and genotyping HEV in pigs and pig handlers may provide further evidence of the pig's role in zoonotic HEV transmission in Bangladesh. © 2017 Blackwell Verlag GmbH.

  5. Chemical Warfare Materiel in Sediment at a Deep-Water Discarded Military Munitions Site

    Science.gov (United States)

    Briggs, C. W.; Bissonnette, M. C.; Edwards, M.; Shjegstad, S. M.

    2016-12-01

    Understanding the release and transformation of chemical agent (CA) at underwater discarded military munitions (DMM) sites is essential to determine the potential risk to human health and impact on the ocean environment; yet few studies have been conducted at sites in excess of 250 m, the depth at which most U.S. CA munitions were disposed. Maritime construction workers installing cables or pipelines at a CA DMM site, as well as fishermen and scientific researchers deploying bottom-contact gear, represent possible exposure pathways to human receptors. The Hawai`i Undersea Military Munitions Assessment (HUMMA) sought to characterize a historic munitions sea-disposal site at depths between 400-650 m. During the 2014 HUMMA Sampling Survey, the Jason 2 remotely operated vehicle was used to collect sediments within two meters of suspected World War II chemical munitions, confirmed to be 100-lb M47 series bombs containing sulfur mustard. When environmental media was brought to the surface, samples were screened for distilled sulfur mustard (HD) and related agent breakdown products (ABP) (collectively referred to as chemical warfare materiel [CWM]). Detectable concentrations of HD and/or its ABP 1,4-dithiane were found in sediments collected at all CA DMM sites; HD was also detected at two control sites. The location and extent of munitions casing deterioration strongly influenced the distribution and level of CWM in sediment. The interior of the casing contained levels of CWM orders of magnitudes higher than that observed in the surrounding sediment at one meter distance, indicating the majority of the CWM is hydrolyzed as it is released from the munitions casing and a fraction of the fill materiel persists in the environment for decades following disposal. Although the potential for future site users to become exposed to CWA in recovered sediments and debris exists, the level of risk is significantly mitigated by the depth and location of the sea-disposal site.

  6. Development of an advanced rocket propellant handler's suit

    Science.gov (United States)

    Doerr, D. F.

    2001-01-01

    Most launch vehicles and satellites in the US inventory rely upon the use of hypergolic rocket propellants, many of which are toxic to humans. These fuels and oxidizers, such as hydrazine and nitrogen tetroxide have threshold limit values as low as 0.01 PPM. It is essential to provide space workers handling these agents whole body protection as they are universally hazardous not only to the respiratory system, but the skin as well. This paper describes a new method for powering a whole body protective garment to assure the safety of ground servicing crews. A new technology has been developed through the small business innovative research program at the Kennedy Space Center. Currently, liquid air is used in the environmental control unit (ECU) that powers the propellant handlers suit (PHE). However, liquid air exhibits problems with attitude dependence, oxygen enrichment, and difficulty with reliable quantity measurement. The new technology employs the storage of the supply air as a supercritical gas. This method of air storage overcomes all of three problems above while maintaining high density storage at relatively low vessel pressures (rights reserved.

  7. Development of an advanced rocket propellant handler's suit

    Science.gov (United States)

    Doerr, DonaldF.

    2001-08-01

    Most launch vehicles and satellites in the US inventory rely upon the use of hypergolic rocket propellants, many of which are toxic to humans. These fuels and oxidizers, such as hydrazine and nitrogen tetroxide have threshold limit values as low as 0.01 PPM. It is essential to provide space workers handling these agents whole body protection as they are universally hazardous not only to the respiratory system, but the skin as well. This paper describes a new method for powering a whole body protective garment to assure the safety of ground servicing crews. A new technology has been developed through the small business innovative research program at the Kennedy Space Center. Currently, liquid air is used in the environmental control unit (ECU) that powers the propellant handlers suit (PHE). However, liquid air exhibits problems with attitude dependence, oxygen enrichment, and difficulty with reliable quantity measurement. The new technology employs the storage of the supply air as a supercritical gas. This method of air storage overcomes all of three problems above while maintaining high density storage at relatively low vessel pressures (protective ensemble marked an advancement in the state-of-the-art in personal protective equipment. Not only was long duration environmental control provided, but it was done without a high pressure vessel. The unit met human performance needs for attitude independence, oxygen stability, and relief of heat stress. This supercritical air (and oxygen) technology is suggested for microgravity applications in life support such as the Extravehicular Mobility Unit.

  8. Refining SCJ Mission Specifications into Parallel Handler Designs

    Directory of Open Access Journals (Sweden)

    Frank Zeyda

    2013-05-01

    Full Text Available Safety-Critical Java (SCJ is a recent technology that restricts the execution and memory model of Java in such a way that applications can be statically analysed and certified for their real-time properties and safe use of memory. Our interest is in the development of comprehensive and sound techniques for the formal specification, refinement, design, and implementation of SCJ programs, using a correct-by-construction approach. As part of this work, we present here an account of laws and patterns that are of general use for the refinement of SCJ mission specifications into designs of parallel handlers used in the SCJ programming paradigm. Our notation is a combination of languages from the Circus family, supporting state-rich reactive models with the addition of class objects and real-time properties. Our work is a first step to elicit laws of programming for SCJ and fits into a refinement strategy that we have developed previously to derive SCJ programs.

  9. 48 CFR 225.770 - Prohibition on acquisition of United States Munitions List items from Communist Chinese military...

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Prohibition on acquisition of United States Munitions List items from Communist Chinese military companies. 225.770 Section 225... of United States Munitions List items from Communist Chinese military companies. This section...

  10. 48 CFR 252.225-7007 - Prohibition on Acquisition of United States Munitions List Items from Communist Chinese Military...

    Science.gov (United States)

    2010-10-01

    ... of United States Munitions List Items from Communist Chinese Military Companies. 252.225-7007 Section... Chinese Military Companies. As prescribed in 225.1103(4), use the following clause: Prohibition On Acquisition of United States Munitions List Items From Communist Chinese Military Companies (SEP 2006) (a...

  11. Survey of nasal carriage of Staphylococcus aureus and intestinal parasites among food handlers working at Gondar University, Northwest Ethiopia.

    Science.gov (United States)

    Dagnew, Mulat; Tiruneh, Moges; Moges, Feleke; Tekeste, Zinaye

    2012-10-02

    Food borne disease are major health problems in developing countries like Ethiopia. Food handlers with poor personal hygiene working in food establishments could be potential sources of disease due to pathogenic organisms. However; information on disease prevalence among food handlers working in University of Gondar cafeterias are very scarce. The aim of this study is to assess the prevalence of nasal carriage of Staphylococcus aureus, their drug resistance pattern and prevalence of intestinal parasites among food handlers working in University of Gondar student's cafeterias. A cross sectional study was conducted among food handlers working in University of Gondar student's cafeterias. A pretested structured questionnaire was used for collecting data. Nasal swab and stool were investigated for S. aureus and intestinal parasites; respectively as per the standard of the laboratory methods. Among 200 food handlers, females comprised 171(85.5%). The majority (67.5%) of the food-handlers were young adults aged 18-39 years. One hundred ninety four (97%) of the food handlers were not certified as a food handler. Forty one (20.5%) food handlers were positive for nasal carriage of S. aureus, of these 4(9.8%) was resistant for methicilin. Giardia lamblia was the most prevalent parasites 22 (11%), followed by Ascaris lumbricoides 13(6.5%), Entamoeba histolytica 12 (6%), Strongyloides stercolaris (0.5), Taenia species 1(0.5%) and Schistosoma mansoni 1(0.5%). The finding stressed that food handlers with different pathogenic micro organisms may pose significant risk on the consumers. Higher officials should implement food handler's training on food safety, periodic medical checkup and continuous monitoring of personal hygiene of food handlers.

  12. Prevalence of bacteria and intestinal parasites among food-handlers in Gondar town, northwest Ethiopia.

    Science.gov (United States)

    Andargie, Gashaw; Kassu, Afework; Moges, Feleke; Tiruneh, Moges; Huruy, Kahsay

    2008-12-01

    Food-handlers with poor personal hygiene working in food-service establishments could be potential sources of infection due to pathogenic organisms. The study was undertaken to determine the prevalence of bacteria and intestinal parasites among 127 food-handlers working in the cafeterias of the University of Gondar and the Gondar Teachers Training College, Gondar, Ethiopia. Fingernail contents of both the hands and stool specimens were collected from all the 127 food-handlers. The samples were examined for bacteria and intestinal parasites following standard procedures. Coagulase-negative staphylococci were the predominant bacteria species (41.7%) isolated from fingernail contents, followed by Staphylococcus aureus (16.5%), Klebsiella species (5.5%), Escherichia coli (3.1%), Serratia species (1.58%), Citrobacter species (0.8%), and Enterobacter species (0.8%). Shigella species were isolated from stool samples of four food-handlers (3.1%). None of the food-handlers was positive for Salmonella species and Shigella species in respect of their fingernail contents. No intestinal parasites were detected from fingernail contents. Intestinal parasites detected in the stools of the food-handlers included Ascaris lumbricoides (18.11%), Strongyloides stercoralis (5.5%), Entamoeba histolytica/dispar (1.6%), Trichuris trichiura (1.6%), hookworm species (0.8%), Gardia lamblia (0.8%), and Schistosoma mansoni (0.8%); 1.6% of the study subjects were positive for each of A. lumbricoides, T. trichiura, hookworm, and G. lamblia. The findings emphasize the importance of food-handlers as potential sources of infections and suggest health institutions for appropriate hygienic and sanitary control measures.

  13. Prevalence and predictors of intestinal parasites among food handlers in Yebu Town, southwest Ethiopia.

    Science.gov (United States)

    Tefera, Tamirat; Mebrie, Getye

    2014-01-01

    As a result of urbanization, eating and drinking from food service establishments is becoming a common practice in developing countries like Ethiopia, which increases the chances of food borne diseases. The health status and hygiene practices of food handlers are the major determinants of food contamination. In developing countries where there are poor regulatory systems for food hygiene, food handlers are often appointed without screening for possible infections associated with poor hygiene like intestinal parasites. This study aimed at determining the prevalence and predictors of intestinal parasites and assessing the hygiene practices among food handlers in Yebu Town, southwest Ethiopia. A cross-sectional study was conducted among a total of 118 food handlers in Yebu Town in January 2011. Fresh stool specimens were collected and processed using both direct wet mount and Formol ether concentration techniques. The overall prevalence of intestinal parasites among the study subjects was 44.1% (52/118). Ascaris lumbricoides and hookworm spp were the predominant parasites identified from the stool of study participants. Age above 35 years (AOR: 4.8, 95% CI: 1.1, 21.8), no regular practice of washing hands before a meal (AOR: 7.8, 95% CI: 2.8, 24.8), and untrimmed finger nail (AOR: 14.7, 95% CI: 2.8, 75.4) were independent predictors of intestinal parasitic infection among the food handlers. The present study showed high prevalence of intestinal parasites among the study subjects. The study also revealed poor personal hygiene like poor practice of hand washing and poor finger nail hygiene. Therefore, much has to be done to improve the personal hygiene of the food handlers. Pre-placement and periodic screening of food handlers for parasites and prompt treatment, and health education on regular trimming or cleaning of fingernails would be the way forward for prevention of food borne diseases.

  14. Prevalence and predictors of intestinal parasites among food handlers in Yebu Town, southwest Ethiopia.

    Directory of Open Access Journals (Sweden)

    Tamirat Tefera

    Full Text Available As a result of urbanization, eating and drinking from food service establishments is becoming a common practice in developing countries like Ethiopia, which increases the chances of food borne diseases. The health status and hygiene practices of food handlers are the major determinants of food contamination. In developing countries where there are poor regulatory systems for food hygiene, food handlers are often appointed without screening for possible infections associated with poor hygiene like intestinal parasites.This study aimed at determining the prevalence and predictors of intestinal parasites and assessing the hygiene practices among food handlers in Yebu Town, southwest Ethiopia.A cross-sectional study was conducted among a total of 118 food handlers in Yebu Town in January 2011. Fresh stool specimens were collected and processed using both direct wet mount and Formol ether concentration techniques.The overall prevalence of intestinal parasites among the study subjects was 44.1% (52/118. Ascaris lumbricoides and hookworm spp were the predominant parasites identified from the stool of study participants. Age above 35 years (AOR: 4.8, 95% CI: 1.1, 21.8, no regular practice of washing hands before a meal (AOR: 7.8, 95% CI: 2.8, 24.8, and untrimmed finger nail (AOR: 14.7, 95% CI: 2.8, 75.4 were independent predictors of intestinal parasitic infection among the food handlers.The present study showed high prevalence of intestinal parasites among the study subjects. The study also revealed poor personal hygiene like poor practice of hand washing and poor finger nail hygiene. Therefore, much has to be done to improve the personal hygiene of the food handlers. Pre-placement and periodic screening of food handlers for parasites and prompt treatment, and health education on regular trimming or cleaning of fingernails would be the way forward for prevention of food borne diseases.

  15. Resolving the Role of the Dynamic Pressure in the Burial, Exposure, Scour, and Mobility of Underwater Munitions

    Science.gov (United States)

    Gilooly, S.; Foster, D. L.

    2017-12-01

    In nearshore environments, the motion of munitions results from a mixture of sediment transport conditions including sheet flow, scour, bedform migration, and momentary liquefaction. Incipient motion can be caused by disruptive shear stresses and pressure gradients. Foster et al. (2006) incorporated both processes into a single parameter, indicating incipient motion as a function of the bed state. This research looks to evaluate the role of the pressure gradient in positional state changes such as burial, exposure, and mobility. In the case of munitions, this may include pressure gradients induced by vortex shedding or the passing wave. Pressure-mapped model munitions are being developed to measure the orientation, rotation, and surface pressure of the munitions during threshold events leading to a new positional state. These munitions will be deployed in inner surf zone and estuary environments along with acoustic Doppler velocimeters (ADVs), pore water pressure sensors, a laser grid, and a pencil beam sonar with an azimuth drive. The additional instruments allow for near bed and far field water column and sediment bed sampling. Currently preliminary assessments of various pressure sensors and munition designs are underway. Two pressure sensors were selected; the thin FlexiForce A201 sensors will be used to indicate munition rolling during threshold events and diaphragm sensors will be used to understand changes in surrounding pore water pressure as the munition begins to bury/unbury. Both sensors are expected to give quantitative measurements of dynamic pressure gradients in the flow field surrounding the munition. Resolving the role of this process will give insight to an improved incipient motion parameter and allow for better munition motion predictions.

  16. Optimal path planning for video-guided smart munitions via multitarget tracking

    Science.gov (United States)

    Borkowski, Jeffrey M.; Vasquez, Juan R.

    2006-05-01

    An advent in the development of smart munitions entails autonomously modifying target selection during flight in order to maximize the value of the target being destroyed. A unique guidance law can be constructed that exploits both attribute and kinematic data obtained from an onboard video sensor. An optimal path planning algorithm has been developed with the goals of obstacle avoidance and maximizing the value of the target impacted by the munition. Target identification and classification provides a basis for target value which is used in conjunction with multi-target tracks to determine an optimal waypoint for the munition. A dynamically feasible trajectory is computed to provide constraints on the waypoint selection. Results demonstrate the ability of the autonomous system to avoid moving obstacles and revise target selection in flight.

  17. Food safety knowledge, attitudes and practices of institutional food-handlers in Ghana.

    Science.gov (United States)

    Akabanda, Fortune; Hlortsi, Eli Hope; Owusu-Kwarteng, James

    2017-01-06

    In large scale cooking, food is handled by many individuals, thereby increasing the chances of food contamination due to improper handling. Deliberate or accidental contamination of food during large scale production might endanger the health of consumers, and have very expensive repercussions on a country. The purpose of this study was to evaluate the food safety knowledge, attitudes, and practices among institutional food- handlers in Ghana. The study was conducted using a descriptive, cross-sectional survey of 29 institutions by conducting face to face interview and administration of questionnaire to two hundred and thirty-five (235) institutional food-handlers. The questionnaire was peer-reviewed and pilot tested in three institutions in the Upper East Region of Ghana, before the final version was distributed to food-handlers. The questionnaire was structured into five distinctive parts to collect information on (i) demographic characteristics, (ii) employees' work satisfaction, (iii) knowledge on food safety, (iv) attitudes towards food safety and (v) food hygiene practices. Majority of the food-handlers were between 41-50 years (39.1%). Female respondents were (76.6%). In our study, the food-handlers were knowledgeable about hygienic practices, cleaning and sanitation procedures. Almost all of the food-handlers were aware of the critical role of general sanitary practices in the work place, such as hand washing (98.7% correct answers), using gloves (77.9%), proper cleaning of the instruments/utensils (86.4%) and detergent use (72.8%). On disease transmission, the results indicates that 76.2% of the food- handlers did not know that Salmonella is a food borne pathogens and 70.6% did not know that hepatitis A is a food borne pathogen. However, 81.7% handlers agreed that typhoid fever is transmitted by food and 87.7% agreed that bloody diarrhea is transmitted by food. Logistic regression analysis testing four models showed statistically significant differences

  18. Food safety knowledge, attitudes and practices of institutional food-handlers in Ghana

    Directory of Open Access Journals (Sweden)

    Fortune Akabanda

    2017-01-01

    Full Text Available Abstract Background In large scale cooking, food is handled by many individuals, thereby increasing the chances of food contamination due to improper handling. Deliberate or accidental contamination of food during large scale production might endanger the health of consumers, and have very expensive repercussions on a country. The purpose of this study was to evaluate the food safety knowledge, attitudes, and practices among institutional food- handlers in Ghana. Methods The study was conducted using a descriptive, cross-sectional survey of 29 institutions by conducting face to face interview and administration of questionnaire to two hundred and thirty-five (235 institutional food-handlers. The questionnaire was peer-reviewed and pilot tested in three institutions in the Upper East Region of Ghana, before the final version was distributed to food-handlers. The questionnaire was structured into five distinctive parts to collect information on (i demographic characteristics, (ii employees’ work satisfaction, (iii knowledge on food safety, (iv attitudes towards food safety and (v food hygiene practices. Results Majority of the food-handlers were between 41–50 years (39.1%. Female respondents were (76.6%. In our study, the food-handlers were knowledgeable about hygienic practices, cleaning and sanitation procedures. Almost all of the food-handlers were aware of the critical role of general sanitary practices in the work place, such as hand washing (98.7% correct answers, using gloves (77.9%, proper cleaning of the instruments/utensils (86.4% and detergent use (72.8%. On disease transmission, the results indicates that 76.2% of the food- handlers did not know that Salmonella is a food borne pathogens and 70.6% did not know that hepatitis A is a food borne pathogen. However, 81.7% handlers agreed that typhoid fever is transmitted by food and 87.7% agreed that bloody diarrhea is transmitted by food. Logistic regression analysis testing four models

  19. Eksplozivne materije za neosetljiva ubojna sredstva / Explosive substances for insensitive munitions

    Directory of Open Access Journals (Sweden)

    Radun Jeremić

    2005-03-01

    Full Text Available U skladu sa sve strožim zahtevima za očuvanje životne sredine i većom bezbednošću, tendencije u razvoju suvremenih ubojnih sredstava (UbS, pored povećanja pouzdanosti i efikasnosti, usmerene su i na povećanje sigurnosti pri njihovoj proizvodnji, skladištenju, manipulaciji i upotrebi. Na taj način dobijena je nova kategorija UbS, tzv. neosetljiva UbS, kod kojih je verovatnoća neželjenog aktiviranja pod dejstvom spoljnih impulsa svedena na minimum. Suština rešavanja ovog problema je primena eksplozivnih materija koje su mnogo manje osetljive na spoljne uticaje u odnosu na standardne. Osnovni zahtev koji se pri tome postavlja je da taktičko-tehničke karakteristike ostanu na nivou ili budu bolje u odnosu na postojeća UbS. U radu je ukratko objašnjen koncept razvoja neosetljivih UbS i dat pregled najznačajnijih rezultata istraživanja u oblasti eksplozivnih materija koje zadovoljavaju zahteve za primenu u neosetljivim UbS. / According to severe environment protection and safety requirements, tendencies in development of modern munitions, besides of increasing reliability and efficiency, are directed to decreasing of danger during their processing, storing, handling and operating. In that manner the new category of munitions has been obtained, named insensitive munitions, with a minimum probability of unplanned activating. The best method for solving this problem is using of explosive substances that are more insensitive according to standard ones. The main requirement is the tactical and technical characteristics stay at the level or to be better according to the existing munitions. In this paper the developing concept of insensitive munitions is shortly explained and presented a review of most important research results of explosive materials that fulfill requirements for applying in insensitive munitions.

  20. Survey of nasal carriage of Staphylococcus aureus and intestinal parasites among food handlers working at Gondar University, Northwest Ethiopia

    Directory of Open Access Journals (Sweden)

    Dagnew Mulat

    2012-10-01

    Full Text Available Abstract Background Food borne disease are major health problems in developing countries like Ethiopia. Food handlers with poor personal hygiene working in food establishments could be potential sources of disease due to pathogenic organisms. However; information on disease prevalence among food handlers working in University of Gondar cafeterias are very scarce. The aim of this study is to assess the prevalence of nasal carriage of Staphylococcus aureus, their drug resistance pattern and prevalence of intestinal parasites among food handlers working in University of Gondar student’s cafeterias. Method A cross sectional study was conducted among food handlers working in University of Gondar student’s cafeterias. A pretested structured questionnaire was used for collecting data. Nasal swab and stool were investigated for S. aureus and intestinal parasites; respectively as per the standard of the laboratory methods. Results Among 200 food handlers, females comprised 171(85.5%. The majority (67.5% of the food-handlers were young adults aged 18–39 years. One hundred ninety four (97% of the food handlers were not certified as a food handler. Forty one (20.5% food handlers were positive for nasal carriage of S. aureus, of these 4(9.8% was resistant for methicilin. Giardia lamblia was the most prevalent parasites 22 (11%, followed by Ascaris lumbricoides 13(6.5%, Entamoeba histolytica 12 (6%, Strongyloides stercolaris (0.5, Taenia species 1(0.5% and Schistosoma mansoni 1(0.5%. Conclusion The finding stressed that food handlers with different pathogenic micro organisms may pose significant risk on the consumers. Higher officials should implement food handler’s training on food safety, periodic medical checkup and continuous monitoring of personal hygiene of food handlers.

  1. Observation of Burial and Migration of Instrumented Surrogate Munitions Deployed in the Swash Zone

    Science.gov (United States)

    Cristaudo, D.; Puleo, J. A.; Bruder, B. L.

    2017-12-01

    Munitions (also known as unexploded ordnance; UXO) in the nearshore environment due to past military activities, may be found on the beach, constituting a risk for beach users. Munitions may be transported from offshore to shallower water and/or migrate along the coast. In addition, munitions may bury in place or be exhumed due to hydrodynamic forcing. Observations on munitions mobility have generally been collected offshore, while observations in the swash zone are scarce. The swash zone is the region of the beach alternately covered by wave runup where hydrodynamic processes may be intense. Studies of munitions mobility require the use of realistic surrogates to quantify mobility/burial and hydrodynamic forcing conditions. Four surrogates (BLU-61 Cluster Bomb, 81 mm Mortar, M151-70 Hydra Rocket and M107 155 mm High Explosive Howitzer) were developed and tested during large-scale laboratory and field studies. Surrogates house sensors that measure different components of motion. Errors between real munitions and surrogate parameters (mass, center of gravity and axial moment of inertia) are all within an absolute error of 20%. Internal munitions sensors consist of inertial motion units (for acceleration and angular velocity in and around the three directions and orientation), pressure transducers (for water depth above surrogate), shock recorders (for high frequency acceleration to detect wave impact on the surrogate), and an in-house designed array of optical sensors (for burial/exposure and rolling). An in situ array of sensors to measure hydrodynamics, bed morphology and sediment concentrations, was deployed in the swash zone, aligned with the surrogate deployment. Data collected during the studies will be shown highlighting surrogate sensor capabilities. Sensors response will be compared with GPS measurements and imagery from cameras overlooking the study sites of surrogate position as a function of time. Examples of burial/exposure and migration of surrogates

  2. A simple method for validation and verification of pipettes mounted on automated liquid handlers

    DEFF Research Database (Denmark)

    Stangegaard, Michael; Hansen, Anders Johannes; Frøslev, Tobias Guldberg

     We have implemented a simple method for validation and verification of the performance of pipettes mounted on automated liquid handlers as necessary for laboratories accredited under ISO 17025. An 8-step serial dilution of Orange G was prepared in quadruplicates in a flat bottom 96-well microtit...... available. In conclusion, we have set up a simple solution for the continuous validation of automated liquid handlers used for accredited work. The method is cheap, simple and easy to use for aqueous solutions but requires a spectrophotometer that can read microtiter plates....... We have implemented a simple method for validation and verification of the performance of pipettes mounted on automated liquid handlers as necessary for laboratories accredited under ISO 17025. An 8-step serial dilution of Orange G was prepared in quadruplicates in a flat bottom 96-well microtiter...

  3. Explaining the food safety behaviours of food handlers using theories of behaviour change: a systematic review.

    Science.gov (United States)

    Young, Ian; Thaivalappil, Abhinand; Greig, Judy; Meldrum, Richard; Waddell, Lisa

    2018-06-01

    Theories of behaviour change can explain the factors affecting food handlers' use of food safety practices. A systematic review was conducted on this topic to identify which theories have been applied in this area and to determine which theories are the most consistent predictors of food handlers' behaviours. Standard systematic review procedures were followed: comprehensive search strategy; relevance screening of abstracts; article characterization; data extraction; risk-of-bias assessment; and descriptive analysis. Among 19 relevant studies, the most commonly investigated theories were the Theory of Planned Behaviour (n = 9 studies) and Health Belief Model (n = 5). All investigated theories were useful to explain food handlers' behavioural intentions and behaviours related to food safety across different settings, and could serve as useful frameworks for future research and practice. However, there was wide variability in the predictive ability of the theories and their specific constructs, indicating theories should be adapted to the local context of application.

  4. Bacterial assessment of food handlers in Sari City, Mazandaran Province, north of Iran

    Directory of Open Access Journals (Sweden)

    Mohtaram Nasrolahei

    2017-03-01

    Full Text Available Food handlers with poor personal hygiene could be potential sources of infection due to pathogenic bacteria. This study was designed to determine the prevalence of bacterial infestation among the food handlers attending the public health center laboratory in Sari, northern Iran for annual check-up.This study was performed from September 2013 to August 2014. Stool samples, fingernail specimens of both hands and nasal swabs were collected from 220 male and female food handlers of different jobs, aged between 17–65 years. The samples were cultured on bacteriological culture media and bacterial species were identified following standard procedures. A structured questionnaire was used to record sociodemographic and behavioral data analysis of the food handlers.Of the total 220 subjects examined, 62.2% showed positive culture for different bacterial species from their fingernail contents, 65.4% were found to be harboring Staphylococcus aureus in their nostrils and 0.9% tested positive for Shigella boydii from stool samples. Staphylococcus aureus was the predominant bacteria isolated from fingernail specimens (46%, followed by Escherichia coli (29.2%, Coliforms (18.2% and Pseudomonas aeruginosa (6.6%. This study showed a statistically significant difference in the rate of bacterial infestation between different occupational categories (p = 0.04. Butchers showed the highest prevalence of bacteria (86.6% in their fingernail contents, followed by fast food workers (76.5%, bakers (73.5%, chicken store workers (73%, school cafeterias staff (53.3%, restaurant workers (46.9% and fruit/vegetables sellers (42.5%. The highest rate of nasal carrier for Staphylococcus aureus was observed among chicken store workers 14/17(20.8%.These findings indicate the need for intensive training/retraining and health education of all food service employees and strengthening the existing screening methods to control the problem of bacterial infestation in food handlers

  5. The health hazards of depleted uranium munitions. Part 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-05-01

    There has been a substantial amount of public discussion on the health effects of the use of depleted uranium (DU), especially on the battlefield. The RoyaI Society therefore convened an independent expert Working Group to review the present state of scientific knowledge about the health and environmental effects of DU, in order to inform public debate. This is the first of two reports. It deals with the amounts of DU to which soldiers could be exposed on the battlefield, the risks from radiation, and what we know from epidemiological studies. We consider past and potential future exposures, the most likely exposures and the 'worst-case' exposures that cannot be excluded. Our second report, to be published later this year, will address the risks from toxic poisoning and environmental issues including risks to civilian populations. The group has consulted widely. It has focused on what is known scientifically about aspects that are relevant to health and has not considered the merits of using DU in munitions. Nor does this report analyse Gulf War syndrome, which has been the subject of other reports. DU is a toxic and weakly radioactive heavy metal that may have adverse consequences to human health, particularly if it enters the body through inhalation, ingestion or wounding. On the battlefield it is used in kinetic energy weapons designed to penetrate the armour of tanks and other vehicles. On impact substantial amounts of DU may be dispersed as particles that can be inhaled and as shrapnel. Our approach has been to estimate the typical levels of exposure on the battlefield over a wide range of scenarios, and the worst-case exposures that individuals are unlikely to exceed. From these we calculate the potential health risks from radiation. We have also considered epidemiological studies of occupational exposures to uranium in other situations as an independent source of information on the risks of inhaling DU particles, although we recognise that the

  6. The health hazards of depleted uranium munitions. Part 1

    International Nuclear Information System (INIS)

    2001-01-01

    There has been a substantial amount of public discussion on the health effects of the use of depleted uranium (DU), especially on the battlefield. The RoyaI Society therefore convened an independent expert Working Group to review the present state of scientific knowledge about the health and environmental effects of DU, in order to inform public debate. This is the first of two reports. It deals with the amounts of DU to which soldiers could be exposed on the battlefield, the risks from radiation, and what we know from epidemiological studies. We consider past and potential future exposures, the most likely exposures and the 'worst-case' exposures that cannot be excluded. Our second report, to be published later this year, will address the risks from toxic poisoning and environmental issues including risks to civilian populations. The group has consulted widely. It has focused on what is known scientifically about aspects that are relevant to health and has not considered the merits of using DU in munitions. Nor does this report analyse Gulf War syndrome, which has been the subject of other reports. DU is a toxic and weakly radioactive heavy metal that may have adverse consequences to human health, particularly if it enters the body through inhalation, ingestion or wounding. On the battlefield it is used in kinetic energy weapons designed to penetrate the armour of tanks and other vehicles. On impact substantial amounts of DU may be dispersed as particles that can be inhaled and as shrapnel. Our approach has been to estimate the typical levels of exposure on the battlefield over a wide range of scenarios, and the worst-case exposures that individuals are unlikely to exceed. From these we calculate the potential health risks from radiation. We have also considered epidemiological studies of occupational exposures to uranium in other situations as an independent source of information on the risks of inhaling DU particles, although we recognise that the parallels may

  7. Adherence to Healthcare Waste Management Guidelines among Nurses and Waste Handlers in Thika Sub-county- Kenya.

    Science.gov (United States)

    Njue, P Mwaniki; Cheboi, K Solomon; Shadrak, Oiye

    2015-10-01

    Despite the set guidelines on Healthcare Waste Management in Kenya, mixing of different categories of waste, crude dumping and poor incineration are still a common phenomenon in public health facilities in Thika Subcounty, Kenya. Thika Subcounty generates 560 Kilograms of healthcare waste daily, which is risk to the many patients (admission rate of 26%). This may pose a potential environmental risk and be a source of disease diffusion. This research explored the adherence to healthcare waste management waste guidelines in health care facilities among the nurses and waste handlers. This was a cross sectional survey in which mixed methods were applied. A census and proportionate random sampling method were used. Quantitative data was analyzed using Statistical Package for Social Science (SPSS) version 20.0, while qualitative data was analyzed manually into themes. Full adherence to the seven waste disposal guidelines was low (16.3%). Knowledge on waste segregation, waste separation then disposal and means of transports were statistically significant in relation to adherence. The type of incinerator and burning status, protection maintenance and supply of adequate waste bins were also important to adherence level. Adherence level was low (16.3%,) and insignificantly different among nurses and waste handlers. From this finding, compliance remains a key challenge. Strategies targeted at contextualizing waste regulations and guidelines into local settings are necessary and important. Policy makers may design and implement standard incinerators across all the health facilities. This study is not exhaustive; therefore, it is necessary to carry out a study linking poor treatment and disposal of clinical waste to purported health outcomes in Kenya.

  8. Decision Support Tools for Munitions Response Performance Prediction and Risk Assessment

    Science.gov (United States)

    2016-09-01

    Oldenburg. A discrimination algorithm for UXO using time domain electromagnetic induction . Journal of Environmental and Engineering Geophysics, 6:91...the course of a munitions response project. Unexploded ordnance (UXO), electromagnetic (EM), sensors, electromagnetic induction (EMI), data...approach defines a detection channel that is a linear combination of received channels. The weightings of received channels comprising the optimized

  9. A two-stage extraction procedure for insensitive munition (IM) explosive compounds in soils.

    Science.gov (United States)

    Felt, Deborah; Gurtowski, Luke; Nestler, Catherine C; Johnson, Jared; Larson, Steven

    2016-12-01

    The Department of Defense (DoD) is developing a new category of insensitive munitions (IMs) that are more resistant to detonation or promulgation from external stimuli than traditional munition formulations. The new explosive constituent compounds are 2,4-dinitroanisole (DNAN), nitroguanidine (NQ), and nitrotriazolone (NTO). The production and use of IM formulations may result in interaction of IM component compounds with soil. The chemical properties of these IM compounds present unique challenges for extraction from environmental matrices such as soil. A two-stage extraction procedure was developed and tested using several soil types amended with known concentrations of IM compounds. This procedure incorporates both an acidified phase and an organic phase to account for the chemical properties of the IM compounds. The method detection limits (MDLs) for all IM compounds in all soil types were regulatory risk-based Regional Screening Level (RSL) criteria for soil proposed by the U.S. Army Public Health Center. At defined environmentally relevant concentrations, the average recovery of each IM compound in each soil type was consistent and greater than 85%. The two-stage extraction method decreased the influence of soil composition on IM compound recovery. UV analysis of NTO established an isosbestic point based on varied pH at a detection wavelength of 341 nm. The two-stage soil extraction method is equally effective for traditional munition compounds, a potentially important point when examining soils exposed to both traditional and insensitive munitions. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Progressing Insensitive Munitions: Benefits and Techniques for Proactively Addressing Environmental Regulations

    Science.gov (United States)

    2012-05-01

    X Worm Tubifex tubifex X X X Black worm Lumbriculus X Asiatic clam Corbicula fluminea X Estuarine/marine water column Mysid shrimp Americamysis...Objective: Characterize traditional and insensitive munitions (IMs) impacts on amphibian larvae to manage a candidate for T&E status that inhabit

  11. Dissolution of NTO, DNAN, and Insensitive Munitions Formulations and Their Fates in Soils

    Science.gov (United States)

    2014-09-01

    plastic bags to save the (a) (b) ERDC/CRREL TR-14-23 10 sample even if the bottle should break from ice formation. During each collection, we...Bacillus sp. Biodegradation 23 (2): 287–295. Prak, D.L., and D. O’Sullivan. 2012. Photochemical Transformation of Munitions Constituents in Marine

  12. Acute toxicity of sea-dumped chemical munitions: Luminating the environmental toxicity of legacy compounds

    DEFF Research Database (Denmark)

    Mohammed Abdullah Christensen, Ilias; Sanderson, Hans; Baatrup, Erik

    2016-01-01

    As a result of the disarmament of Germany after the Second World War, 65,000 tons of chemical munitions were dumped in the Baltic Sea. Approximately 13,000 tons containing chemical warfare agents (CWAs) of which 11,000 tons were dumped in the Bornholm Basin east of Bornholm. This paper addresses...

  13. Disposal of chemical agents and munitions stored at Pine Bluff Arsenal, Pine Bluff, Arkansas

    Energy Technology Data Exchange (ETDEWEB)

    Ensminger, J.T.; Hillsman, E.L.; Johnson, R.D.; Morrisey, J.A.; Staub, W.P.; Boston, C.R.; Hunsaker, D.B.; Leibsch, E.; Rickert, L.W.; Tolbert, V.R.; Zimmerman, G.P.

    1991-09-01

    The Pine Bluff Arsenal (PBA) near Pine Bluff, Arkansas, is one of eight continental United States (CONUS) Army installations where lethal unitary chemical agents and munitions are stored and where destruction of agents and munitions is proposed under the Chemical Stockpile Disposal Program (CSDP). The chemical agent inventory at PBA consists of approximately 12%, by weight, of the total US stockpile. The destruction of the stockpile is necessary to eliminate the risk to the public from continued storage and to dispose of obsolete and leaking munitions. In 1988 the US Army issued a Final Programmatic Environmental Impact Statement (FPEIS) for the CSDP that identified on-site disposal of agents and munitions as the environmentally preferred alternative (i.e., the alternative with the least potential to cause significant adverse impacts). The purpose of this report is to examine the proposed implementation of on-site disposal at PBA in light of more recent and more detailed data than those on which the FPEIS is based. New population data were used to compute fatalities using the same computation methods and values for all other parameters as in the FPEIS. Results indicate that all alternatives are indistinguishable when the potential health impacts to the PBA community are considered. However, risks from on-site disposal are in all cases equal to or less than risks from other alternatives. Furthermore, no unique resources with the potential to prevent or delay implementation of on-site disposal at PBA have been identified.

  14. Acoustic Scattering from Munitions in the Underwater Environment: Measurements and Modeling

    Science.gov (United States)

    Williams, K.; Kargl, S. G.; Espana, A.

    2017-12-01

    Acoustical scattering from elastic targets has been a subject of research for several decades. However, the introduction of those targets into the ocean environment brings new complexities to quantitative prediction of that scattering. The goal of our work has been to retain as much of the target physics as possible while also handling the propagation to and from the target in the multi-path ocean environment. Testing of the resulting predictions has been carried out via ocean experiments in which munitions are deployed on and within the sediment. We will present the overall philosophy used in the modeling and then compare model results to measurements. A 60 cm long 30 cd diameter aluminum cylinder will be used as a canonical example and then a sample of results for a variety of munitions will be shown. Finally, we will discuss the use of both the models and measurements in assessing the ability of sonar to discriminate munitions from other man-made targets. The difficulty of this challenge will be made apparent via results from a recent experiment in which both munitions and man-made "clutter" were deployed on a rippled sand interface.

  15. Event Handler II: a fast, programmable, CAMAC-coupled data acquisition interface

    International Nuclear Information System (INIS)

    Hensley, D.C.

    1979-01-01

    The architecture of the Event Handler II, a fast, programmable data acquisition interface linked to and through CAMAC is described. The special features of this interface make it a powerful tool in implementing data acquisition systems for experiments in nuclear physics. 1 figure, 1 table

  16. Intervention strategies for the reduction of microbiological contamination on the hands of food handlers

    Directory of Open Access Journals (Sweden)

    Naína Lopes de JESUS

    Full Text Available Abstract The purpose of this study was to evaluate intervention strategies for the reduction of microbiological contamination on the hands of food handlers. The study was conducted from January 2009 to December 2014 at a food and nutrition company in Curitiba, Brazil. Samples from the hands of 877 handlers were collected for microbiological analysis. The intervention strategies applied during each year were: 2009, substitute the use of odorless liquid soap and an antiseptic product by one product; 2010, was increasing the staff of technical supervisors and conducting biannual training; 2011 was to move the lavatories for handwashing, and the use of 70% alcohol gel; 2012, was to increase the frequency of the training of food handlers; 2013, was new weekly monitoring, to evaluation of the use of bactericide soap; 2013 and 2014 was implemented an internal program to verify food production. The intervention introduced in 2011 the 2012 and 2013 the 2014 reduced the contamination of the hands of food handlers. The use of 70% alcohol gel, the moving of the location of the lavatories, weekly monitoring of the use of bactericide soap and implementation of the internal program, were the strategies that contributed the most to the reduction of the microbial.

  17. Effect of frying instructions for food handlers on acrylamide concentration in French Fries: an explorative study

    NARCIS (Netherlands)

    Sanny, M.A.I.; Luning, P.A.; Jinap, S.; Bakker, E.J.; Boekel, van T.

    2013-01-01

    The objective of this study was to obtain insight into the effect of frying instructions on food handlers' control decisions in restaurants and to investigate the impact of control decisions on the variation and concentration of acrylamide in French fries. The concentrations of acrylamide and

  18. Event Handler: a fast programmable, CAMAC-coupled data acquisition interface

    International Nuclear Information System (INIS)

    Hensley, D.C.

    1978-01-01

    The purpose of this paper is to describe the architecture and performance of the Event Handler, a fast, programmable data acquisition interface which is linked to and through CAMAC. The special features of this interface make it a powerful tool in implementing data acquisition systems for experiments in nuclear physics

  19. [Street food: analysis of hygienic and sanitary conditions of food handlers].

    Science.gov (United States)

    de Souza, Giovanna Carbonera; dos Santos, Celso Tadeu Barbosa; Andrade, Anderson Assunção; Alves, Luciene

    2015-08-01

    The consumption of street food is an economical and practical alternative for the population. However, concerns regarding the safety of these foods are increasing. Thus, this study aimed to analyze the hygienic and sanitary conditions of the street food trade in Uberaba in the State of Minas Gerais. For this purpose, 30 street vending sites were evaluated using a structured questionnaire and microbiological analysis of food handlers' hands and food contact recipients and surfaces. The findings showed low adequacy of street food regarding hand hygiene and food contact surfaces. With respect to surfaces, the results for mesophilic aerobic microorganisms revealed that only 23.3% had satisfactory sanitary conditions. The level of contamination of hands by fecal thermotolerant coliforms and/or Coagulase positive Staphylococci was unsatisfactory in approximately 47% of food handlers. The conclusion drawn is that the hygienic and sanitary conditions of food handlers in Uberaba are poor. It is therefore necessary to adopt effective and permanent training programs on food safety for food handlers urgently.

  20. 7 CFR 1000.27 - Handler responsibility for records and facilities.

    Science.gov (United States)

    2010-01-01

    ... make such records and its facilities available to the market administrator. If adequate records of a... and made available, any skim milk and butterfat required to be reported by such handler for which... quantities of skim milk and butterfat contained in, or represented by, products received in any form...

  1. Serological evidence of hepatitis E virus infection in pigs and jaundice among pig handlers in Bangladesh

    DEFF Research Database (Denmark)

    Haider, Najmul; Khan, M. S. U.; Hossain, M. B.

    2017-01-01

    Hepatitis E virus (HEV) is the most common cause of viral hepatitis in humans. Pigs may act as a reservoir of HEV, and pig handlers were frequently identified with a higher prevalence of antibodies to HEV. The objectives of this study were to identify evidence of HEV infection in pigs and compare...

  2. Pathogenic Escherichia coli and food handlers in luxury hotels in Nairobi, Kenya.

    Science.gov (United States)

    Onyango, Abel O; Kenya, Eucharia U; Mbithi, John J N; Ng'ayo, Musa O

    2009-11-01

    The epidemiology and virulence properties of pathogenic Escherichia coli among food handlers in tourist destination hotels in Kenya are largely uncharacterized. This cross-sectional study among consenting 885 food handlers working in nine luxurious tourist hotels in Nairobi, Kenya determined the epidemiology, virulence properties, antibiotics susceptibility profiles and conjugation abilities of pathogenic Escherichia coli. Pathogenic Escherichia coli was detected among 39 (4.4%) subjects, including 1.8% enteroaggregative Escherichia coli (EAEC) harboring aggR genes, 1.2% enterotoxigenic Escherichia coli (ETEC) expressing both LT and STp toxins, 1.1% enteropathogenic Escherichia coli (EPEC) and 0.2% Shiga-like Escherichia coli (EHEC) both harboring eaeA and stx2 genes respectively. All the pathotypes had increased surface hydrophobicity. Using multivariate analyses, food handlers with loose stools were more likely to be infected with pathogenic Escherichia coli. Majority 53.8% of the pathotypes were resistant to tetracycline with 40.2% being multi-drug resistant. About 85.7% pathotypes trans-conjugated with Escherichia coli K12 F(-) NA(r) LA. The carriage of multi-drug resistant, toxin expressing pathogenic Escherichia coli by this population is of public health concern because exposure to low doses can result in infection. Screening food handlers and implementing public awareness programs is recommended as an intervention to control transmission of enteric pathogens.

  3. Microbiological and parasitological investigation among food handlers in hotels in the Dead Sea area, Jordan.

    Science.gov (United States)

    Abdel-Dayem, Muna; Al Zou'bi, Renad; Hani, Rehan Bani; Amr, Zuhair Sami

    2014-10-01

    Intestinal parasitic and bacterial infections constitute a major health issue in developing countries. The present study investigates and assesses infection rates among food handlers with intestinal parasites and microbial agents in luxurious hotels in the Dead Sea area of Jordan. A total of 901 stool samples were collected from food handlers (35 females and 866 males) employed in four main hotels in the Dead Sea area. Fecal samples were examined microscopically for intestinal parasites. Standard culture and biochemical techniques were used for the isolation and identification of Salmonella and Shigella spp. in stool samples. Five species of protozoan (Blastocystis hominis, Giardia intestinalis, Entamoeba coli, Entamoeba histolytica, and Endolimax nana), one helminth (Hymenolepis nana), and one cylindrical worm (Enterobius vermicularis) were recovered with an overall infection rate of 3.7%. G. intestinalis was the most prevalent parasitic infection with infection rate of 2.44%. All samples were negative for both Salmonella and Shigella. Findings highlight the important role of food handlers in the transmission of intestinal parasites to high-class clients accommodated in luxury hotels, and stress the urgent need for regular health and parasitologic examination of food handlers. Copyright © 2013. Published by Elsevier B.V.

  4. Screening Level Ecological Risk Assessments of Some Military Munitions and Obscurant-related Compounds for Selected Threatened and Endangered Species

    National Research Council Canada - National Science Library

    Von Stackleberg, Katherine; Amos, Craig; Butler, C; Smith, Thomas; Famely, J; McArdle, M; Southworth, B; Steevens, Jeffrey

    2006-01-01

    ...) associated with munitions. This study evaluates the potential long-term impacts on selected threatened and endangered species resulting from dispersion and deposition of vapors and particles found in the fog oils...

  5. Prevalence of intestinal parasites among food handlers at cafeteria of Jimma University Specialized Hospital, Southwest Ethiopia

    Directory of Open Access Journals (Sweden)

    Hundaol Girma

    2017-08-01

    Full Text Available Objective: To assess the prevalence of intestinal parasites and associated risk factors among food-handlers working at cafeteria of Jimma University Specialized Hospital, Jimma, Ethiopia. Methods: Socio-demographic and associated risk factors data were collected using a pretested structured questionnaire. Stool and finger-nail specimens were screened for intestinal parasites using direct wet mount and formol-ether concentration sedimentation techniques. Data were edited, cleaned, entered and analyzed using statistical package for social science (SPSS version 20. P ≤ 0.05 was taken as statistically significant. Results: A total of 94 food-handlers working at cafeteria of Jimma University Specialized Hospital were participated in the study. From the total 148 samples (94 stool and 54 fingernails content examined, 31 (33% were positive for one or more parasites. Over all eight types of intestinal parasites were identified. The most prevalent parasite identified was Ascaris lumbricoides (16% followed by Entamoeba histolytica/dispar (4.3%. There was significant association between parasitic infection and food handlers who did not practice hand washing after defecation and before serving food. Conclusions: Relatively high prevalence of intestinal parasites is detected indicating poor hygiene practice of the food-handlers at the study site. The study also identified finger-nail status, hand washing after defecation and before serving food as determinants of intestinal parasitic infection. It is crucial for provision of regular training on strict adherence to good personal hygiene and hygienic food-handling practices as well as regular inspection and medical checkup of food-handlers.

  6. Contamination of Ethiopian paper currency notes from various food handlers with E. coli.

    Science.gov (United States)

    Hiko, Adem; Abdata, Kasahun; Muktar, Yimer; Woyesa, Mezene; Mohammed, Abdela

    2016-01-01

    Contamination rate of Ethiopian paper currency notes handled by various food handlers with Escherichia coli and antimicrobial susceptibility of the isolates was assessed. A total of 384 Ethiopian Birr (ETB) notes were randomly sampled from meat handlers at butchers, bread and the related food handlers at cafeteria, fruit and vegetables handlers at supermarket, and milk sellers both at open market and dairy station. Fifty control new currencies were also sampled from Commercial Bank of Ethiopia. Both surfaces of the currency were swabbed using wet sterile cotton. The swab was overnight incubated in buffered peptone water. A loop full was streaked on eosin methylene blue agar and followed by biochemical test on presumptive E. coli colonies. Randomly selected isolates were exposed to chloramphenicol (C-30 µg), neomycin (N-30 µg), oxytetracycline (OT-30 µg), polymyxin-B (PB-300 IU) and trimethoprim-sulfamethoxazole (SXT-1.25/23.75/µg) susceptibility using disc diffusion techniques. E. coli was not isolated from currency used as control. A total of 288 (75 %) currency notes were found carrying E. coli. E. coli prevalence was ranges from 67.2 % at open market milk sellers to 87.2 % at dairy station milk sellers; from 64.8 % on ETB 100 to 82.9 % on ETB 1. Differences were not observed in E. coli prevalence on currency notes from among almost all food handlers (P > 0.05). Susceptibility of tested isolates to each chloramphenicol, oxytetracycline and trimethoprim-sulfamethoxazole was 100 %, and to polymyxin-B was 97.3 %. High resistance (83.7 %) was observed to neomycin. The finding indicates, contaminated food can be a source of E. coli for further contamination of currency which again transfer through various foods ready for consumption.

  7. Prevalence of Intestinal Parasites among Food-handlers in Shiraz, Iran

    Directory of Open Access Journals (Sweden)

    Mohammad Hossein MOTAZEDIAN

    2015-12-01

    Full Text Available Background: Parasitic intestinal infections are still among socioeconomic prob­lems in the world, especially in developing countries like Iran. Food-handlers that directly deal with production and distribution of foods between societies are one of the most important sources to transmit parasitic infections to humans. The aim of this study was to determine the prevalence of intestinal parasitic infections among food-handlers in Shiraz, Iran. Methods: In this cross-sectional study, 1021 feces samples were randomly col­lected from food-handlers in Shiraz, central Iran from August to September 2013. Two different methods, routine direct fecal examination and Formalin –Ethyl ace­tate concentration as a complementary technique, were done to detect parasites.Results: The prevalence of parasitic organisms was 10.4% in the food-handlers. The most species of the protozoan parasites were G. lamblia, E. coli and B. hominis; meanwhile, only one infection by H. nana (0.1% was detected in this group. Mixed infections were observed in 13.2% (n=14/106 of positive cases. The majority of participants were male (57%; however, data analysis showed significant statistical difference in the rate of infection between females 11.9% (n=53/444 and males 9% (n=52/577 (P=0. 024. There was no significant statistical difference in the rate of infection among different educational and occupation groups.Conclusion: Although decreasing of helminthic infections is distinct, but infecting with protozoan parasites is still important in food-handlers. Concentration tech­nique is more useful than direct smear technique, especially for detection parasites in low number. High level of education in our study showed that training courses in this group could be effective in the implementation of control and prevention programs.

  8. Distribution of chemical warfare agent, energetics, and metals in sediments at a deep-water discarded military munitions site

    Science.gov (United States)

    Briggs, Christian; Shjegstad, Sonia M.; Silva, Jeff A. K.; Edwards, Margo H.

    2016-06-01

    There is a strong need to understand the behavior of chemical warfare agent (CWA) at underwater discarded military munitions (DMM) sites to determine the potential threat to human health or the environment, yet few studies have been conducted at sites in excess of 250 m, the depth at which most U.S. chemical munitions were disposed. As part of the Hawai'i Undersea Military Munitions Assessment (HUMMA), sediments adjacent to chemical and conventional DMM at depths of 400-650 m were sampled using human occupied vehicles (HOVs) in order to quantify the distribution of CWA, energetics, and select metals. Sites in the same general area, with no munitions within 50 m in any direction were sampled as a control. Sulfur mustard (HD) and its degradation product 1,4-dithiane were detected at each CWA DMM site, as well as a single sample with the HD degradation product 1,4-thioxane. An energetic compound was detected in sediment to a limited extent at one CWA DMM site. Metals common in munitions casings (i.e., Fe, Cu, and Pb) showed similar trends at the regional and site-wide scales, likely reflecting changes in marine sediment deposition and composition. This study shows HD and its degradation products can persist in the deep-marine environment for decades following munitions disposal.

  9. Munition Burial by Local Scour and Sandwaves: large-scale laboratory experiments

    Science.gov (United States)

    Garcia, M. H.

    2017-12-01

    Our effort has been the direct observation and monitoring of the burial process of munitions induced by the combined action of waves, currents and pure oscillatory flows. The experimental conditions have made it possible to observe the burial process due to both local scour around model munitions as well as the passage of sandwaves. One experimental facility is the Large Oscillating Water Sediment Tunnel (LOWST) constructed with DURIP support. LOWST can reproduce field-like conditions near the sea bed. The second facility is a multipurpose wave-current flume which is 4 feet (1.20 m) deep, 6 feet (1.8 m) wide, and 161 feet (49.2 m) long. More than two hundred experiments were carried out in the wave-current flume. The main task completed within this effort has been the characterization of the burial process induced by local scour as well in the presence of dynamic sandwaves with superimposed ripples. It is found that the burial of a finite-length model munition (cylinder) is determined by local scour around the cylinder and by a more global process associated with the formation and evolution of sandwaves having superimposed ripples on them. Depending on the ratio of the amplitude of these features and the body's diameter (D), a model munition can progressively get partially or totally buried as such bedforms migrate. Analysis of the experimental data indicates that existing semi-empirical formulae for prediction of equilibrium-burial-depth, geometry of the scour hole around a cylinder, and time-scales developed for pipelines are not suitable for the case of a cylinder of finite length. Relative burial depth (Bd / D) is found to be mainly a function of two parameters. One is the Keulegan-Carpenter number, KC, and the Shields parameter, θ. Munition burial under either waves or combined flow, is influenced by two different processes. One is related to the local scour around the object, which takes place within the first few hundred minutes of flow action (i.e. short

  10. The personal and general hygiene practices of food handlers in the delicatessen sections of retail outlets in South Africa.

    Science.gov (United States)

    van Tonder, Izanne; Lues, Jan F R; Theron, Maria M

    2007-11-01

    This paper presents data on personal- and general-hygiene knowledge and practices among food handlers in the delicatessens of a major retail group in the Western Cape in South Africa. Food handlers were interviewed by means of a structured questionnaire. Although the majority of food handlers adhered to basic hygiene principles, there is definitely a need for proper and continuous training in personal and general hygiene, not only for food handlers, but also for management. The study reported here is of importance particularly in view of new local regulations governing the application of the hazard analysis and critical control point (HACCP) system. Management is responsible for the implementation of this system, and where supervision is not adequate, the manager of the outlet should intervene to ensure that staff conform to the requirements.

  11. Positive and negative psychological impact after secondary exposure to politically motivated violence among body handlers and rehabilitation workers.

    Science.gov (United States)

    Shiri, Shimon; Wexler, Isaiah D; Alkalay, Yasmin; Meiner, Zeev; Kreitler, Shulamith

    2008-12-01

    The positive and negative psychological impact of secondary exposure to politically motivated violence was examined among body handlers and hospital rehabilitation workers, 2 groups that differed in their proximity and immediacy to violent events. Survivors of politically motivated violence served as a comparison group. Body handlers experienced high levels of positive psychological impact and traumatic stress symptoms. Levels of positive psychological impact among on-scene body handlers were higher than those experienced by rehabilitation workers. Traumatic stress symptoms predicted positive psychological impact among body handlers. These findings indicate that proximity to stressors is associated with higher levels of positive and negative psychological impact. Physical proximity is a major contributory factor to both positive and negative psychological effects of secondary exposure to trauma.

  12. Munitions having an insensitive detonator system for initiating large failure diameter explosives

    Science.gov (United States)

    Perry, III, William Leroy

    2015-08-04

    A munition according to a preferred embodiment can include a detonator system having a detonator that is selectively coupled to a microwave source that functions to selectively prime, activate, initiate, and/or sensitize an insensitive explosive material for detonation. The preferred detonator can include an explosive cavity having a barrier within which an insensitive explosive material is disposed and a waveguide coupled to the explosive cavity. The preferred system can further include a microwave source coupled to the waveguide such that microwaves enter the explosive cavity and impinge on the insensitive explosive material to sensitize the explosive material for detonation. In use the preferred embodiments permit the deployment and use of munitions that are maintained in an insensitive state until the actual time of use, thereby substantially preventing unauthorized or unintended detonation thereof.

  13. Disposal of chemical agents and munitions stored at Umatilla Depot Activity, Hermiston, Oregon

    Energy Technology Data Exchange (ETDEWEB)

    Zimmerman, G.P.; Hillsman, E.L.; Johnson, R.O.; Miller, R.L.; Patton, T.G.; Schoepfle, G.M.; Tolbert, V.R.; Feldman, D.L.; Hunsaker, D.B. Jr.; Kroodsma, R.L.; Morrissey, J.; Rickert, L.W.; Staub, W.P.; West, D.C.

    1993-02-01

    The Umatilla Depot Activity (UMDA) near Hermiston, Oregon, is one of eight US Army installations in the continental United States where lethal unitary chemical agents and munitions are stored, and where destruction of agents and munitions is proposed under the Chemical Stockpile Disposal Program (CSDP). The chemical agent inventory at UMDA consists of 11.6%, by weight, of the total US stockpile. The destruction of the stockpile is necessary to eliminate the risk to the public from continued storage and to dispose of obsolete and leaking munitions. In 1988 the US Army issued a Final Programmatic Environmental Impact Statement (FPEIS) for the CSDP that identified on-site disposal of agents and munitions as the environmentally preferred alternative (i.e., the alternative with the least potential to cause significant adverse impacts), using a method based on five measures of risk for potential human health and ecosystem/environmental effects; the effectiveness and adequacy of emergency preparedness capabilities also played a key role in the FPEIS selection methodology. In some instances, the FPEIS included generic data and assumptions that were developed to allow a consistent comparison of potential impacts among programmatic alternatives and did not include detailed conditions at each of the eight installations. The purpose of this Phase 1 report is to examine the proposed implementation of on-site disposal at UMDA in light of more recent and more detailed data than those included in the FPEIS. Specifically, this Phase 1 report is intended to either confirm or reject the validity of on-site disposal for the UMDA stockpile. Using the same computation methods as in the FPEIS, new population data were used to compute potential fatalities from hypothetical disposal accidents. Results indicate that onsite disposal is clearly preferable to either continued storage at UMDA or transportation of the UMDA stockpile to another depot for disposal.

  14. Cost Of Compliance On Munitions Consolidation From Lualualei To West Loch

    Science.gov (United States)

    2017-12-01

    well as the opportunity to drastically reduce the transportation of ordnance to and from the Lualualei Annex through local community roads and areas...single road and the availability of CULT trucks and/or drivers that could impede an expeditious response in a contingency operation. This project...to distribute munitions to the fleet. This consolidation plan will also reduce the infrastructure costs for ordnance storage, maintenance , and

  15. Validation of Passive Sampling Devices for Monitoring of Munitions Constituents in Underwater Environments

    Science.gov (United States)

    2017-09-01

    and explosives of concern (MEC) corroding, breaching, and leaking MC into the water column (Darrach, Chutjian, and Plett, 1998; GMI, 2007; Lewis et...underwater UWMM have the potential to corrode, breach, and leak munitions constituents (MCs) such as 2,4,6-trinitrotoluene (TNT) and hexahydro-1,3,5...Wang et al., 2013), a number of challenges prevent accurate assessment of environmental exposure using traditional water , sediment, and tissue

  16. Environmental Assessment: Demolition of Munitions Storage Area Facilities at Ellsworth AFB, South Dakota

    Science.gov (United States)

    2009-11-01

    CEQ Council on Environmental Quality CFR Code of Federal Regulations CO Carbon Monoxide cpm Counts per Minute CRM Cultural Resource Manager...newspaper advertisement in the Rapid City Journal announcing the availability of the Draft EA for a 30-day public and agency review to facilitate...Ellsworth Air Force Base Munitions Storage Area Environmental Assessment Page 2-5 public involvement in the project. This advertisement was published one

  17. Predictors for Risk Factors for Spread of Avian Influenza Viruses by Poultry Handlers in Live bird markets in Uganda.

    Science.gov (United States)

    Kirunda, H; Mugimba, K K; Erima, B; Mimbe, D; Byarugaba, D K; Wabwire-Mangen, F

    2015-08-01

    Live bird markets (LBMs) are essential for marketing poultry, but have been linked to many outbreaks of avian influenza (AI) and its spread. In Uganda, it has been observed that demographic characteristics of poultry traders/handlers influence activities and decision-making in LBMs. The study investigated the influence of socio-demographic characteristics of poultry handlers: age, sex, religion, educational background, level of income, location of residence and region of operation on 20 potential risk factors for introduction and spread of AI in LBMs. Study sites included 39 LBMs in the four regions of Uganda. Data was collected using a semi-structured questionnaire administered to 424 poultry handlers. We observed that background of education was a predictor for slaughter and processing of poultry in open sites. Location of residence was associated with slaughter of poultry from open sites and selling of other livestock species. Region influenced stacking of cages, inadequate cleaning of cages, feeders and drinkers, and provision of dirty feed and water. Specifically, bird handlers with secondary level of education (OR = 12.9, 95% CI: 2.88-57.4, P < 0.01) were more likely to be involved in open site slaughter of poultry than their counterparts without formal education. Comparatively, urbanite bird handlers were less likely to share poultry equipment (OR = 0.4, 95% CI: 0.22-0.63, P < 0.01) than rural resident handlers. Poultry handlers in Northern were 3.5 times more likely to practise insufficient cleaning of cages (OR = 3.5, 95% CI: 1.52-8.09) compared to those in Central region. We demonstrated that some socio-demographic characteristics of poultry handlers were predictors to risky practices for introduction and spread of AI viruses in LBMs in Uganda. © 2014 Blackwell Verlag GmbH.

  18. Health and environmental problems of using antiarmour munitions containing depleted uranium core

    International Nuclear Information System (INIS)

    Matousek, J.

    2006-01-01

    In the 1970s, core of depleted uranium commenced to be introduced into the breakthrough antitank munitions of various calibers and types in order to considerably enhance their effectiveness due to extremely high density in comparison with steel. The health and environmental threats of using this munitions and other weaponry where depleted uranium has been utilised as counterbalance stem from the pyrophoric character of uranium, burnt due to material deformation and friction when penetrating armour targets creating thus highly respirable aerosol of uranium oxides that are deposited in alveoli after being inhaled or in other tissues after being ingested. Composition and main properties of depleted uranium are presented. Chronic effects of deposited particles of uranium oxides are due to internal irradiation of sensitive organs at proceeding radioactive decay accompanied with alpha irradiation. Long-term internal irradiation by radionuclides producing alpha-rays leads to proved risk of increased incidence of carcinoma and leukaemia not to speak on chronic chemical toxicity of uranium, independent of its isotopic composition. Environmental impact of extensive use of munitions with depleted uranium in the recent armed conflicts is assessed. (authors)

  19. Innovative permeable cover system to reduce risks at a chemical munitions burial site

    International Nuclear Information System (INIS)

    Powels, C.C.; Bon, I.; Okusu, N.M.

    1997-01-01

    An innovative permeable sand cover with various integrated systems has been designed to contain and treat the Old O-Field chemical munitions landfill at Aberdeen Proving Ground, Maryland. The 18,200 m 2 (4.5 acre) landfill was used from the mid 1930s to the mid 1950s for the disposal of chemical, incendiary, and explosive munitions from domestic and foreign origins, together with contaminated wastes associated with the development and production of chemical warfare agents (CWA). The site is suspected to be contaminated with white phosphorous (WP) (which when dry, spontaneously burns when exposed to air), shock sensitive picric acid fuses and has the potential to contain large quantities of CWA-filled munitions. Historically, one to three explosions or fires occurred per ten-year period at the landfill. Such events have the potential to cause a CWA release to the environment, which could potentially affect densely populated areas. Recovery and decontamination projects conducted at the site in the late 1940s and early 1950s used large amounts of decontamination chemicals (containing solvents) and fuels which further contaminated the area. The groundwater downgradient of the landfill is contaminated with volatile organic compounds, metals, explosives and CWA degradation compounds and is currently being contained by a groundwater extraction and treatment system. This report describes a remedial action program for the site

  20. A simple method for validation and verification of pipettes mounted on automated liquid handlers

    DEFF Research Database (Denmark)

    Stangegaard, Michael; Hansen, Anders Johannes; Frøslev, Tobias G

    2011-01-01

    We have implemented a simple, inexpensive, and fast procedure for validation and verification of the performance of pipettes mounted on automated liquid handlers (ALHs) as necessary for laboratories accredited under ISO 17025. A six- or seven-step serial dilution of OrangeG was prepared in quadru......We have implemented a simple, inexpensive, and fast procedure for validation and verification of the performance of pipettes mounted on automated liquid handlers (ALHs) as necessary for laboratories accredited under ISO 17025. A six- or seven-step serial dilution of OrangeG was prepared...... are freely available. In conclusion, we have set up a simple, inexpensive, and fast solution for the continuous validation of ALHs used for accredited work according to the ISO 17025 standard. The method is easy to use for aqueous solutions but requires a spectrophotometer that can read microtiter plates....

  1. Knowledge and practice of food hygiene and safety among food handlers in fast food restaurants in Benin City, Edo State.

    Science.gov (United States)

    Isara, A R; Isah, E C

    2009-09-01

    To assess the knowledge and practice of food hygiene and safety among food handlers in fast food restaurants in Benin City, Edo State. A descriptive cross-sectional study was carried out among 350 respondents who were selected by means of a systematic sampling method and interviewed using a semi-structured researcher-administered questionnaire. An observational checklist was thereafter used to inspect their personal hygiene status. The mean age of the food handlers was 26.4 +/- 6.1 years. Two hundred and twenty eight (65.1%) were females while 34.9% were males. A majority (98%) of the respondents had formal education. There was good knowledge and practice of food hygiene and safety among the respondents. Knowledge was significantly influenced by previous training in food hygiene and safety (p = 0.002). Food handlers who had worked for longer years in the fast food restaurants had better practice of food hygiene and safety (p = 0.036). The level of education of respondents did not significantly influenced their practice of food hygiene and safety (p = 0.084). Although, 299 (85.4%) food handlers were generally clean, skin lesions was seen in 4 (7.3%) of them. This study showed good knowledge and practice of food hygiene and safety by food handlers in the fast food restaurants in Benin City, but there is need for improvement through training and retraining of food handlers by the management of the restaurants and the local government authorities.

  2. Sleep Quality of Call Handlers Employed in International Call Centers in National Capital Region of Delhi, India.

    Science.gov (United States)

    Raja, J D; Bhasin, S K

    2016-10-01

    Call center sector in India is a relatively new and fast growing industry driving employment and growth in modern India today. Most international call centers in National Capital Region (NCR) of Delhi operate at odd work hours corresponding to a time suitable fortheir international customers. The sleep quality of call handlers employed in these call centers is in jeopardy owing to their altered sleep schedule. To assess the sleep quality and determine its independent predictors among call handlers employed in international call centers in NCR of Delhi. A cross-sectional questionnaire-based study was conducted on 375 call handlers aged 18-39 years employed in international call centers in NCR of Delhi. Sleep quality was assessed using Athens Insomnia scale along with a pre-tested, structured questionnaire. The mean age of respondents was 24.6 (SD 2.4) years. 78% of participants were male. 83.5% of respondents were unmarried. 44.3% of call handlers were cigarette smokers. Physical ailments were reported by 37% call handlers. 77.6% of call handlers had somesuspicion of insomnia or suspected insomnia; the rest had no sleep problem. Smoking, poor social support, heavy workload, lack of relaxation facility at office, and prolonged travel time to office were independent predictors of sleep quality (pSafeguarding their health becomes an occupational health challenge to public health specialists.

  3. Assessment of Food Safety Knowledge, Attitude, Self-Reported Practices, and Microbiological Hand Hygiene of Food Handlers

    Science.gov (United States)

    Lee, Hui Key; Abdul Halim, Hishamuddin; Thong, Kwai Lin; Chai, Lay Ching

    2017-01-01

    Institutional foodborne illness outbreaks continue to hit the headlines in the country, indicating the failure of food handlers to adhere to safe practices during food preparation. Thus, this study aimed to compare the knowledge, attitude, and self-reported practices (KAP) of food safety assessment and microbiological assessment of food handlers’ hands as an indicator of hygiene practices in food premises. This study involved 85 food handlers working in a university located in Kuala Lumpur, Malaysia. The food safety KAP among food handlers (n = 67) was assessed using a questionnaire; while the hand swabs (n = 85) were tested for the total aerobic count, coliforms, and Escherichia coli, Staphylococcus aureus, Salmonella, Vibrio cholerae and Vibrio parahaemolyticus. The food handlers had moderate levels of food safety knowledge (61.7%) with good attitude (51.9/60) and self-reported practices (53.2/60). It is noteworthy that the good self-reported practices were not reflected in the microbiological assessment of food handlers’ hands, in which 65% of the food handlers examined had a total aerobic count ≥20 CFU/cm2 and Salmonella was detected on 48% of the food handlers’ hands. In conclusion, the suggestion of this study was that the food handlers had adequate food safety knowledge, but perceived knowledge failed to be translated into practices at work.

  4. Assessment of Food Safety Knowledge, Attitude, Self-Reported Practices, and Microbiological Hand Hygiene of Food Handlers

    Directory of Open Access Journals (Sweden)

    Hui Key Lee

    2017-01-01

    Full Text Available Institutional foodborne illness outbreaks continue to hit the headlines in the country, indicating the failure of food handlers to adhere to safe practices during food preparation. Thus, this study aimed to compare the knowledge, attitude, and self-reported practices (KAP of food safety assessment and microbiological assessment of food handlers’ hands as an indicator of hygiene practices in food premises. This study involved 85 food handlers working in a university located in Kuala Lumpur, Malaysia. The food safety KAP among food handlers (n = 67 was assessed using a questionnaire; while the hand swabs (n = 85 were tested for the total aerobic count, coliforms, and Escherichia coli, Staphylococcus aureus, Salmonella, Vibrio cholerae and Vibrio parahaemolyticus. The food handlers had moderate levels of food safety knowledge (61.7% with good attitude (51.9/60 and self-reported practices (53.2/60. It is noteworthy that the good self-reported practices were not reflected in the microbiological assessment of food handlers’ hands, in which 65% of the food handlers examined had a total aerobic count ≥20 CFU/cm2 and Salmonella was detected on 48% of the food handlers’ hands. In conclusion, the suggestion of this study was that the food handlers had adequate food safety knowledge, but perceived knowledge failed to be translated into practices at work.

  5. Automated extraction of DNA and PCR setup using a Tecan Freedom EVO® liquid handler

    DEFF Research Database (Denmark)

    Frøslev, Tobias Guldberg; Hansen, Anders Johannes; Stangegaard, Michael

    2009-01-01

    We have implemented and validated automated protocols for DNA extraction and PCR setup using a Tecan Freedom EVO® liquid handler mounted with the TeMagS magnetic separation device. The methods were validated for accredited, forensic genetic work according to ISO 17025 using the Qiagen Mag...... genetic DNA typing can be implemented on a simple robot leading to the reduction of manual work as well as increased quality and throughput....

  6. Characterization of Nontyphoidal Salmonella Isolates from Asymptomatic Migrant Food Handlers in Peninsular Malaysia.

    Science.gov (United States)

    Woh, Pei Yee; Thong, Kwai Lin; Behnke, Jerzy Marian; Lewis, John Watkin; Zain, Siti Nursheena Mohd

    2017-08-01

    Asymptomatic Salmonella carriers who work as food handlers pose food safety and public health risks, particularly during food preparation, and this has serious implications for the disease burden in society. Therefore, we conducted a study to determine the number of Salmonella carriers in a migrant cohort in several food establishments in three major cities in Peninsular Malaysia. Sociodemographic data and stool samples were collected and analyzed using standard methods of detection and isolation. Antimicrobial susceptibility tests of the positive samples were also performed. A total of 317 migrant food handlers, originating from South and Southeast Asian countries, were recruited voluntarily. Nine (2.8%) stool samples were confirmed to be Salmonella positive. PCR serotyping and pulsed-field gel electrophoresis identified four serotypes as Typhimurium (n = 3), Corvallis (n = 2), Hadar (n = 1), Agona (n = 1) and two unknown serovars. Antimicrobial susceptibility tests revealed that all nine isolates were susceptible to amoxicillin-clavulanic acid, cefotaxime, ceftazidime, ceftriaxone, and gentamycin. However, seven isolates were found to be multidrug resistant to ampicillin, chloramphenicol, trimethoprim-sulfamethoxazole, sulfonamides, streptomycin, and tetracycline. This study highlights that carriers of nontyphoidal Salmonella exist among migrant food handlers, which poses a health risk to consumers through food contamination. Our results indicate a need for authorities to enhance food safety awareness in the migrant workers and to reevaluate current health screening methods to include preventive measure such as mandatory stool screening as part of the preemployment and routine health examinations.

  7. Microorganisms as an Indicator of Hygiene Status Among Migrant Food Handlers in Peninsular Malaysia.

    Science.gov (United States)

    Woh, Pei Yee; Thong, Kwai Lin; Lim, Yvonne Ai Lian; Behnke, Jerzy Marian; Lewis, John Watkin; Mohd Zain, Siti Nursheena

    2017-10-01

    This study used microbial indicators to assess the hygiene status of 383 migrant food handlers from 3 urban cities in Peninsular Malaysia. Microbiological analysis revealed that all the hand swabs tested 99.5% positive for aerobic plate counts (mean [M] ± standard deviation [SD] = 3.57 ± 0.83 log 10 CFU [colony forming unit]), 20.8% positive for total coliform/ Escherichia coli (M ± SD = 0.30 ± 0.67 log 10 CFU), and 63.4% positive for Staphylococcus aureus (M ± SD = 1.38 ± 1.26 log 10 CFU). In addition, aerobic plate counts and Staphylococcus aureus counts exceeded the acceptable standard levels. Bacterial counts were found to be significantly associated with subjects' country of origin ( P = .019) and working responsibilities ( P = .001). Our findings indicate high probability of transmission of pathogenic bacteria from the food handlers' hands to customers during meal preparation and serving. This calls for improvements in personal hygiene and sanitation standards by the relevant health authorities among migrant food handlers.

  8. Industrial Special Wastes Generated in Iowa and Manpower Characteristics of Employee Handlers, Volume II.

    Science.gov (United States)

    Pierce, David R.

    This document, Vol. II in a set, presents the results of the development and instruction of two pilot modules. The first module deals with pesticide container recycling. The second module deals with hazardous substances, especially paints and solvents. Each module contains background information, instructor narrative, student activities, and…

  9. News from ESO Archive Services: Next Generation Request Handler and Data Access Delegation

    Science.gov (United States)

    Fourniol, N.; Lockhart, J.; Suchar, D.; Tacconi-Garman, L. E.; Moins, C.; Bierwirth, T.; Eglitis, P.; Vuong, M.; Micol, A.; Delmotte, N.; Vera, I.; Dobrzycki, A.; Forchì, V.; Lange, U.; Sogni, F.

    2012-09-01

    We present the new ESO Archive services which improve the electronic data access via the Download Manager and also provide PIs with the option to delegate data access to their collaborators via the Data Access Control.

  10. Seroprevalence of hepatitis B and C viruses among medical waste handlers at Gondar town Health institutions, Northwest Ethiopia

    Directory of Open Access Journals (Sweden)

    Anagaw Belay

    2012-01-01

    Full Text Available Abstract Background Viral hepatitis is an inflammation of the liver due to viral infections and there are groups of viruses that affects the liver of which hepatitis B and C viruses are the causative agents of sever form of liver disease with high rate of mortality. Medical waste handlers who undergo collection, transportation, and disposal of medical wastes in the health institutions are at risk of exposure to acquire those infections which transmit mainly as a result of contaminated blood and other body fluids including injury with sharp instruments, splash to the eye or mucous membrane. This study aimed to determine the prevalence of hepatitis B and/or C viruses and associated risk factors among medical waste handlers. Results A cross-sectional study was conducted from April, 2011 to June, 2011 in government health institutions at Gondar town. Socio-demographic and possible risk factors data from medical waste handlers were collected using pre-tested and well structured questionnaires. Venous bloods were collected and the serums were tested for hepatitis B surface antigen and anti-hepatitis C antibody using rapid Immunochromatography assay. Data was entered and analyzed using SPSS software package (version16. Chi-square and Fisher exact tests were used to assess risk of association. A p-value of A total of 100 medical waste handlers and 100 non-clinical waste handlers were examined for HBV and HCV viruses. HBV was detected in 6 (6.0% and 1 (1.0% and HCV in 1 (1.0% and 0 (0.0% of medical waste handlers and non-clinical waste handlers, respectively. Significant differences were observed in the detection rates of HBV (OR = 6.3; X2 = 4.1; P = 0.04 and overall infection rate (HBV + HCV (OR = 7.5; X2 = 5.2; P: 0.02 in medical waste handlers when compared with non-clinical waste handlers. It was found that none of the observed risk factors significantly associated with rate of hepatitis infection compared to others. Conclusions Prevalence of HBV and

  11. An outbreak of norovirus gastroenteritis associated with asymptomatic food handlers in Kinmen, Taiwan

    Directory of Open Access Journals (Sweden)

    Meng-Yu Chen

    2016-05-01

    Full Text Available Abstract Background In February 2015 an outbreak of gastroenteritis occurred in a distillery in Kinmen, Taiwan. At least 450 affected employees developed the symptoms of diarrhea and vomiting after attending a lunch banquet on 6 February. Epidemiological, laboratory and environmental investigations were conducted to identify the agent and source of this outbreak. Methods A case–control study was carried out among lunch attendees from the distillery. Using a semi-structured questionnaire, food and beverage consumption in the lunch banquet was assessed, as well as demographic and clinical data of the exposed people. An outbreak case was defined as a diner who developed at least three following symptoms: diarrhea, vomiting, abdominal pain, nausea, chills and/or weakness in the 72 h following the lunch. Controls were defined as lunch attendees who did not have any of the above symptoms. Rectal swabs or stool samples of the symptomatic exposed diners and food handlers as well as food and environmental samples were collected to test potential bacteria and viruses. Norovirus was detected by reverse transcription-polymerase chain reaction and sequence analysis. An environmental assessment, including environmental inspection of the restaurant and a review of work practices of food workers, was undertaken. Results Of 363 respondents with complete data, 169 met the case definition and 111 met the control definition. Consumption of pork liver in cold appetizers (adjusted odd ratio (aOR 3.23; 95 % confidence interval (CI: 1.26–8.30 and lamb chops (aOR: 3.98, 95 % CI: 1.74–9.11 were each associated with increased risk of illness. No cases but two asymptomatic food handlers who prepared or cooked the implicated foods tested positive for norovirus genotype I.6. Food and environmental samples were negative for any bacteria. Environmental assessment indicated that hand washing facilities were not properly accessible to food handlers. Inappropriate

  12. The sanitary conditions of food service establishments and food safety knowledge and practices of food handlers in bahir dar town.

    Science.gov (United States)

    Kibret, Mulugeta; Abera, Bayeh

    2012-03-01

    Lack of basic infrastructure, poor knowledge of hygiene and practices in food service establishments can contribute to outbreaks of foodborne illnesses. The aims of this study were to investigate the food safety knowledge and practices of food handlers and to assess the sanitary conditions of food service establishments in Bahir Dar town. A cross-sectional study was conducted in Bahir Dar in May 2011 and data were collected using questionnaire and observation checklist on employees' knowledge of food hygiene and their practices as well on sanitary conditions of the food service establishments The median age of the food handlers was 22 years and among the 455 subjects 99 (21.8%) have had food hygiene training. Sixty six percent of the establishments had flush toilets whereas 5.9% of the establishment had no toilet. Only 149 (33.6%) of the establishments had a proper solid waste collection receptacle and there was statistically significant association between the sanitary conditions and license status of the establishments (p=0.01). Most of all, knowledge gap in food hygiene and handling practice was observed. In addition, there was statistically significant difference between trained (professional) handlers and non-trained handlers with regard to food hygiene practices (p<0.05). While more than 50% of the handlers prepare meals ahead of the peak selling time, more than 50% of the left over was poorly managed. This study revealed poor sanitary conditions and poor food hygiene practices of handlers. Educational programs targeted at improving the attitude of food handlers and licensing and regular inspections have been recommended.

  13. Assessment of food safety practices of food service food handlers (risk assessment data): testing a communication intervention (evaluation of tools).

    Science.gov (United States)

    Chapman, Benjamin; Eversley, Tiffany; Fillion, Katie; Maclaurin, Tanya; Powell, Douglas

    2010-06-01

    Globally, foodborne illness affects an estimated 30% of individuals annually. Meals prepared outside of the home are a risk factor for acquiring foodborne illness and have been implicated in up to 70% of traced outbreaks. The Centers for Disease Control and Prevention has called on food safety communicators to design new methods and messages aimed at increasing food safety risk-reduction practices from farm to fork. Food safety infosheets, a novel communication tool designed to appeal to food handlers and compel behavior change, were evaluated. Food safety infosheets were provided weekly to food handlers in working food service operations for 7 weeks. It was hypothesized that through the posting of food safety infosheets in highly visible locations, such as kitchen work areas and hand washing stations, that safe food handling behaviors of food service staff could be positively influenced. Using video observation, food handlers (n = 47) in eight food service operations were observed for a total of 348 h (pre- and postintervention combined). After the food safety infosheets were introduced, food handlers demonstrated a significant increase (6.7%, P < 0.05, 95% confidence interval) in mean hand washing attempts, and a significant reduction in indirect cross-contamination events (19.6%, P < 0.05, 95% confidence interval). Results of the research demonstrate that posting food safety infosheets is an effective intervention tool that positively influences the food safety behaviors of food handlers.

  14. Food safety knowledge, attitude and practices of meat handler in abattoir and retail meat shops of Jigjiga Town, Ethiopia.

    Science.gov (United States)

    Tegegne, H A; Phyo, H W W

    2017-12-01

    A cross-sectional survey was carried out among 91 meat handlers by using structured questionnaire to determine the food safety knowledge, attitude and practices in abattoir and retail meat shops of Jigjiga Town. The result shows that majority of the meat handlers were illiterate (30.8%) and primary school leaver (52.7%), and no one went through any food safety training except one meat inspector. The food-handlers' knowledge and safety practices were below acceptable level with the mean score of 13.12 ± 2.33 and 7.7 ± 2.1 respectively. Only few respondents knew about Staphylococcus aureus (3.3% correct answer), hepatitis A virus (19.8% correct answer), and E. coli (5.5% correct answer) as food borne pathogens. About 64% of meat handlers have good attitude about safety of food with mean of total score 14.4 ± 2. All respondents answer correctly questions about proper meat handling and hand washing but they did not translate into strict food hygiene practices. Chi2 analysis testing for the association between knowledge, attitude and practices did not show any significant association. It may be due to meat handlers' below acceptable level safety practices regardless of sociodemographic characteristics, knowledge and attitude. However, there was strong association between level of education and knowledge, and knowledge and hand washing (p practices through better understanding and positive attitude.

  15. Genetic Variation of Giardia lamblia Isolates from Food-handlers in Kashan, Central Iran

    Directory of Open Access Journals (Sweden)

    Hossein HOOSHYAR

    2017-02-01

    Full Text Available Background: Based on genotyping study of human isolates of Giardia lamblia; humans are mainly infected by two assemblages A and B. The present study was carried out to determine the sub-assemblages of G. lamblia isolated from food handlers referred to Kashan health centers, central Iran, 2015.Methods: In this cross-sectional study, 3653 stool samples collected from food-handlers that annually refer to health center for getting a health certification and examined microscopically for G. lamblia cyst. Totally, 44 isolates were selected from 47 Giardia positive samples. Cysts were partially purified by the sucrose density gradient method. After freeze-thaw cycles, genomic DNA was extracted using QIAamp Stool Mini kit. A single step PCR-RFLP method was used to amplify a 458bp fragment at the glutamate dehydrogenase (gdh locus, restriction enzymes BspLI and RsaI were used for distinguish between genotypes A and B and their subgroups.Results: Of 44 isolates, 24(54.5% were sub-assemblage AII, 9(20.5% group B including 7(15.9% BIII and 2(4.6% BIV sub-assemblage and 11(25% isolates showed a mixed pattern of AII and B. Sub-assemblage AI was not detected in this study.Conclusion: The higher rate of sub-assemblage AII demonstrated an anthroponotic origin of the infection so infected food-handlers could directly transmit this protozoan to consumers via contaminated food and water. For finding of pattern of transmission and distribution of Giardia assemblages and sub-assemblage, more studies in human and animal population in different regions are necessary.

  16. Occupational determinants of serum cholinesterase inhibition among organophosphate-exposed agricultural pesticide handlers in Washington State

    Science.gov (United States)

    Hofmann, Jonathan N; Keifer, Matthew C; De Roos, Anneclaire J; Fenske, Richard A; Furlong, Clement E; van Belle, Gerald; Checkoway, Harvey

    2010-01-01

    Objective To identify potential risk factors for serum cholinesterase (BuChE) inhibition among agricultural pesticide handlers exposed to organophosphate (OP) and N-methyl-carbamate (CB) insecticides. Methods We conducted a longitudinal study among 154 agricultural pesticide handlers who participated in the Washington State cholinesterase monitoring program in 2006 and 2007. BuChE inhibition was analyzed in relation to reported exposures before and after adjustment for potential confounders using linear regression. Odds ratios estimating the risk of ‘BuChE depression’ (>20% from baseline) were also calculated for selected exposures based on unconditional logistic regression analyses. Results An overall decrease in mean BuChE activity was observed among study participants at the time of follow-up testing during the OP/CB spray season relative to pre-season baseline levels (mean decrease of 5.6%, P < 0.001). Score for estimated cumulative exposure to OP/CB insecticides in the past 30 days was a significant predictor of BuChE inhibition (β = −1.74, P < 0.001). Several specific work practices and workplace conditions were associated with greater BuChE inhibition, including mixing/loading pesticides and cleaning spray equipment. Factors that were protective against BuChE inhibition included full-face respirator use, wearing chemical-resistant boots, and storing personal protective equipment in a locker at work. Conclusions Despite existing regulations, agricultural pesticide handlers continue to be exposed to OP/CB insecticides at levels resulting in BuChE inhibition. These findings suggest that modifying certain work practices could potentially reduce BuChE inhibition. Replication from other studies will be valuable. PMID:19819864

  17. A Biography of the Trousered Munitions Women’s Uniform of World War 1

    OpenAIRE

    Roberts, Jennifer

    2017-01-01

    Ce chapitre fournit une vue d’ensemble de la recherche pour un exemple survivant de l’uniforme de pantalons des « munitionettes », alors que les travailleurs dans les usines de munitions dans la Première Guerre Mondiale étaient reconnus. Si nous examinons la réaction sur les femmes qui portent un vêtement d’homme et les discussions d’émancipation de cet uniforme, ces recherches ont étudié considérablement les archives jadis moins utilisées dans l’histoire des vêtements. Comme il n’existe plus...

  18. Occupational therapists as dog handlers: the collective experience with animal-assisted therapy in Iraq.

    Science.gov (United States)

    Fike, Lorie; Najera, Cecilia; Dougherty, David

    2012-01-01

    The first pair of US Army animal-assisted therapy (AAT) dogs deployed to Iraq in December 2007 with the 85th Medical Detachment Combat and Operational Stress Control unit. As of this writing, 6 dogs have deployed to Iraq and Afghanistan, offering Soldiers a small reminder of home. Army occupational therapists led the way in this endeavor as primary handlers; the path has been rocky but ultimately rewarding. This article depicts how occupational therapists used AAT and animal-assisted activities to help Soldiers cope with the stressors of living in a deployed environment. Challenges and lessons-learned, including anecdotal examples, are discussed.

  19. 7 CFR 301.89-15 - Compensation for growers, handlers, and seed companies in the 1999-2000 and subsequent crop seasons.

    Science.gov (United States)

    2010-01-01

    ... Karnal bunt after purchase by the handler or seed company, as long as the price to be paid by the handler... the intention of producing certified wheat seed. (1) Growers. Growers of wheat in an area under the... prior to sale, or that was tested by APHIS and found positive for Karnal bunt after sale and the price...

  20. Automated extraction of DNA from blood and PCR setup using a Tecan Freedom EVO liquid handler for forensic genetic STR typing of reference samples

    DEFF Research Database (Denmark)

    Stangegaard, Michael; Frøslev, Tobias G; Frank-Hansen, Rune

    2011-01-01

    We have implemented and validated automated protocols for DNA extraction and PCR setup using a Tecan Freedom EVO liquid handler mounted with the Te-MagS magnetic separation device (Tecan, Männedorf, Switzerland). The protocols were validated for accredited forensic genetic work according to ISO...... handler leading to the reduction of manual work, and increased quality and throughput....

  1. Factors affecting food handling Practices among food handlers of Dangila town food and drink establishments, North West Ethiopia

    Science.gov (United States)

    2014-01-01

    Background Food borne diseases are major health problems in developed and developing countries including Ethiopia. The problem is more noticeable in developing countries due to prevailing poor food handling and sanitation practices, inadequate food safety laws, weak regulatory systems, lack of financial resources to invest on safer equipments, and lack of education for food handlers. Methods The objective of this study was to assess food handling practice and associated factors among food handlers working in food and drinking establishments of Dangila town, North West Ethiopia. Cross-sectional quantitative study design was conducted among 406 food handlers working in 105 food and drink establishments from July to August 2013 in Dangila town. Data were collected using face to face interview with pretested structured questionnaire and physical observation. Result The mean age of the respondents was 22.7 ± 4.2 years of which 62.8% of the food handlers were females. Two hundred thirteen (52.5%) of food handlers had good food handling practices. Marital status (AOR = 7.52, 95% CI, 1.45-38.97), monthly income (AOR = 0.395, 95% CI, 0.25-0.62), knowledge about food handling (AOR = 1.69, 95% CI, 1.05-2.73), existence of shower facility (AOR = 1.89, 95% CI, 1.12-3.21) and separate dressing room (AOR = 1.97, 95% CI, 1.11-3.49) were found to be significantly associated with good food handling Practices. Conclusion Above half of food handlers had good food handling practices. Marital status, monthly income, knowledge status, existence of shower facility, existence of separate dressing room and presence of insect and rodent were factors associated with food handling Practices. PMID:24908104

  2. Prevalence and factors associated with intestinal parasitic infections among food handlers of Southern Ethiopia: cross sectional study.

    Science.gov (United States)

    Mama, Mohammedaman; Alemu, Getaneh

    2016-02-01

    Globally about one third of the total population is estimated to be infected with intestinal parasites, of which, the majority are people living in tropical and sub-tropical parts of the world. Cases of intestinal parasitosis are also highly abundant in Ethiopia and hence the aim of present study was to assess prevalence and predictors of intestinal parasitic infections among food handlers working in Arba Minch University students' cafeteria, South Ethiopia. A cross sectional study was conducted among food handlers working in Arba Minch University from April to June, 2015. A pretested structured questionnaire was used for collecting data about socio-demographic characteristics and possible risk factors. Stool specimens were collected and examined microscopically for the presence of eggs, cysts and trophozoites of intestinal parasites. Data entry and analysis were done using SPSS version 20 software. A total of 376 food handlers were enrolled in the study of which thirty one of them were not willing to participate for a stool examination. The majority of study participants were females 273 (72.6 %). About 123 (36 %) of food handlers were found to be positive for different intestinal parasites with the most abundant parasite of Entamoeba histolytica/dispar 48 (14 %) followed by Ascaris lumbricoides 32 (9.27 %). Finger nail status (AOR: 2.2, 95 % CI: 1.29-3.72), hand washing practice after toilet (AOR: 1.71, 95 % CI: 1.06-2.77), hand washing practice before food handling (AOR: 1.69, 95 % CI: 1.04-2.75), preparing food when suffering from diseases (AOR: 3.08, 95 % CI: 1.17-8.13), and using common knife for cutting raw flesh food and other food (AOR: 1.72, 95 % CI: 1.01-2.92) were independent predictors of intestinal parasitic infection among the food handlers. This study revealed a high prevalence of intestinal parasites among food handlers. Since most of the intestinal parasites are transmitted by the feco-oral route, food handlers could be an important source of

  3. Disposal of chemical agents and munitions stored at Pine Bluff Arsenal, Pine Bluff, Arkansas. Final phase 1, Environmental report

    Energy Technology Data Exchange (ETDEWEB)

    Ensminger, J.T.; Hillsman, E.L.; Johnson, R.D.; Morrisey, J.A.; Staub, W.P.; Boston, C.R.; Hunsaker, D.B.; Leibsch, E.; Rickert, L.W.; Tolbert, V.R.; Zimmerman, G.P.

    1991-09-01

    The Pine Bluff Arsenal (PBA) near Pine Bluff, Arkansas, is one of eight continental United States (CONUS) Army installations where lethal unitary chemical agents and munitions are stored and where destruction of agents and munitions is proposed under the Chemical Stockpile Disposal Program (CSDP). The chemical agent inventory at PBA consists of approximately 12%, by weight, of the total US stockpile. The destruction of the stockpile is necessary to eliminate the risk to the public from continued storage and to dispose of obsolete and leaking munitions. In 1988 the US Army issued a Final Programmatic Environmental Impact Statement (FPEIS) for the CSDP that identified on-site disposal of agents and munitions as the environmentally preferred alternative (i.e., the alternative with the least potential to cause significant adverse impacts). The purpose of this report is to examine the proposed implementation of on-site disposal at PBA in light of more recent and more detailed data than those on which the FPEIS is based. New population data were used to compute fatalities using the same computation methods and values for all other parameters as in the FPEIS. Results indicate that all alternatives are indistinguishable when the potential health impacts to the PBA community are considered. However, risks from on-site disposal are in all cases equal to or less than risks from other alternatives. Furthermore, no unique resources with the potential to prevent or delay implementation of on-site disposal at PBA have been identified.

  4. Prevalence of Intestinal Parasitic Infection among Food Handlers in Northwest Iran

    Directory of Open Access Journals (Sweden)

    Davoud Balarak

    2016-01-01

    Full Text Available Parasitic diseases are among the most important infectious diseases and pose health problems in many countries, most especially in developing countries. Workers at food centers could transmit parasitic infections in the absence of sanitation. This is a descriptive study conducted to determine the prevalence of intestinal parasitic infections in food clerks in the city of Tabriz in 2014. Data was recorded in the offices of the health center for all food handlers who were referred to the laboratory for demographic and stool tests to receive the health card. Parasitic infection was observed in 172 cases (3.73% of 4612 samples. A total of 156 positive samples (90.69% were related to protozoa and 16 (9.3% were related to helminthes. Most of the parasitic infections were related to Giardia and Entamoeba coli and the lowest infection was related to H. nana. Also, there was a significant relationship between level of education and parasitic infection rate (P=0.0044. But there was no significant difference between the type of infection and amount of intestinal parasites. The results show that the prevalence of intestinal parasites, especially pathogenic protozoa, is common in some food handlers. Therefore, more sanitary controls are required and increasing of education will play a crucial role in improving the health of these people.

  5. New Version of SeismicHandler (SHX) based on ObsPy

    Science.gov (United States)

    Stammler, Klaus; Walther, Marcus

    2016-04-01

    The command line version of SeismicHandler (SH), a scientific analysis tool for seismic waveform data developed around 1990, has been redesigned in the recent years, based on a project funded by the Deutsche Forschungsgemeinschaft (DFG). The aim was to address new data access techniques, simplified metadata handling and a modularized software design. As a result the program was rewritten in Python in its main parts, taking advantage of simplicity of this script language and its variety of well developed software libraries, including ObsPy. SHX provides an easy access to waveforms and metadata via arclink and FDSN webservice protocols, also access to event catalogs is implemented. With single commands whole networks or stations within a certain area may be read in, the metadata are retrieved from the servers and stored in a local database. For data processing the large set of SH commands is available, as well as the SH scripting language. Via this SH language scripts or additional Python modules the command set of SHX is easily extendable. The program is open source, tested on Linux operating systems, documentation and download is found at URL "https://www.seismic-handler.org/".

  6. In-Flight Self-Alignment Method Aided by Geomagnetism for Moving Basement of Guided Munitions

    Directory of Open Access Journals (Sweden)

    Shuang-biao Zhang

    2015-01-01

    Full Text Available Due to power-after-launch mode of guided munitions of high rolling speed, initial attitude of munitions cannot be determined accurately, and this makes it difficult for navigation and control system to work effectively and validly. An in-flight self-alignment method aided by geomagnetism that includes a fast in-flight coarse alignment method and an in-flight alignment model based on Kalman theory is proposed in this paper. Firstly a fast in-flight coarse alignment method is developed by using gyros, magnetic sensors, and trajectory angles. Then, an in-flight alignment model is derived by investigation of the measurement errors and attitude errors, which regards attitude errors as state variables and geomagnetic components in navigation frame as observed variables. Finally, fight data of a spinning projectile is used to verify the performance of the in-flight self-alignment method. The satisfying results show that (1 the precision of coarse alignment can attain below 5°; (2 the attitude errors by in-flight alignment model converge to 24′ at early of the latter half of the flight; (3 the in-flight alignment model based on Kalman theory has better adaptability, and show satisfying performance.

  7. Investigation of a new passive sampler for the detection of munitions compounds in marine and freshwater systems.

    Science.gov (United States)

    Warren, Joseph K; Vlahos, Penny; Smith, Richard; Tobias, Craig

    2018-07-01

    Over the last century, unexploded ordnances have been disposed of in marine shelf systems because of a lack of cost-effective alternatives. Underwater unexploded ordnances have the potential to leak 2,4,6-trinitrotoluene (TNT) and 1,3,5-trinitro-1,3,5-triazine (RDX), commonly used chemical munitions, and contaminate local waters, biota, and sediments. The rate at which this contamination occurs in the environment is relatively unknown, and the cost- and time-prohibitive nature of sampling across sites makes mapping difficult. In the present study we assessed the efficacy of ethylene-vinyl acetate (EVA) for sampling relatively soluble munitions compounds over a range of environmental conditions (i.e., changes in temperature and salinity) and optimized the composition of the passive sampling polymer. The EVA sampler was able to successfully detect ambient concentrations of lingering munitions compounds from field sites containing unexploded ordnances. The sampler affinity for the munitions in terms of an EVA-water partition coefficient was greater than the standard octanol water values for each target compound. Partitioning of compounds onto EVA over the natural ranges of salinity did not change significantly, although uptake varied consistently and predictably with temperature. Increasing the vinyl acetate to ethylene ratio of the polymer corresponded to an increase in uptake capacity, consistent with enhanced dipole-dipole interactions between the munitions and the polymer. This sampler provides a cost-effective means to map and track leakage of unexploded ordnances both spatially and temporally. Environ Toxicol Chem 2018;37:1990-1997. © 2018 SETAC. © 2018 SETAC.

  8. Tracking and Interception of Ground-Based RF Sources Using Autonomous Guided Munitions with Passive Bearings-Only Sensors and Tracking Algorithms

    National Research Council Canada - National Science Library

    Ezal, Kenan; Agate, Craig

    2006-01-01

    This paper considers the problem of tracking and intercepting a potentially moving ground-based RF source with an autonomous guided munition that has a passive bearings-only sensor located on its nose...

  9. Operation Iraqi Freedom: DOD Should Apply Lessons Learned Concerning the Need for Security over Conventional Munitions Storage Sites to Future Operations Planning

    National Research Council Canada - National Science Library

    D'Agostino, Davi M

    2007-01-01

    The Government Accountability Office (GAO) is releasing a report today on lessons learned concerning the need for security over conventional munitions storage sites that provides the basis for this testimony...

  10. Prevalence and factors associated with intestinal parasites among food handlers of food and drinking establishments in Aksum Town, Northern Ethiopia.

    Science.gov (United States)

    Gezehegn, Dejen; Abay, Mebrahtu; Tetemke, Desalegn; Zelalem, Hiwet; Teklay, Hafte; Baraki, Zeray; Medhin, Girmay

    2017-10-17

    Various epidemiological studies indicate that the prevalence of intestinal parasites is high in developing countries and those parasites are major public health importance in Sub-Saharan Africa. Their distribution is mainly associated with poor personal hygiene, environmental sanitation and lack of access to clean water. This study was conducted to estimate the prevalence of intestinal parasitic infection and identify factors associated with intestinal parasitic infection among food handlers in the Aksum Town of Tigray Regional State, North Ethiopia. A cross-sectional study design was used among 400 randomly selected food handlers who were selected as respondents. Data were collected by face to face interviewer administered questionnaire supplemented with observational checklist. Fresh stool samples were collected from respondents and were examined microscopically for the presence of any of intestinal parasites using standard laboratory methods. Multivariable logistic regression model using Adjusted Odds Ratio (AOR) and 95% Confidence Interval (CI) was fitted to analyze the independent predictors of intestinal parasitic infections. The mean age of the food handlers included in this study was 26.0 years. Of the total respondents, 72.5% were females, 63% have completed at least secondary school educational level. Five species of Intestinal Parasites (IPs) were identified. The overall prevalence of being infected with at least one intestinal parasite was 14.5%, 95% CI (11.3, 18.0). The odds of being positive for at least one intestinal parasitic infection was 12.3 times higher among food handlers who practice medical checkup every 9 months compared to those who have a medical checkup every 3 months. The odds of being positive for intestinal parasitic infection was 3 times higher among food handlers with no formal education compared to those who have a level of education secondary school and above. Food handlers who received food hygiene and safety training were 66

  11. Prevalence and factors associated with intestinal parasites among food handlers of food and drinking establishments in Aksum Town, Northern Ethiopia

    Directory of Open Access Journals (Sweden)

    Dejen Gezehegn

    2017-10-01

    Full Text Available Abstract Background Various epidemiological studies indicate that the prevalence of intestinal parasites is high in developing countries and those parasites are major public health importance in Sub-Saharan Africa. Their distribution is mainly associated with poor personal hygiene, environmental sanitation and lack of access to clean water. This study was conducted to estimate the prevalence of intestinal parasitic infection and identify factors associated with intestinal parasitic infection among food handlers in the Aksum Town of Tigray Regional State, North Ethiopia. Methods A cross-sectional study design was used among 400 randomly selected food handlers who were selected as respondents. Data were collected by face to face interviewer administered questionnaire supplemented with observational checklist. Fresh stool samples were collected from respondents and were examined microscopically for the presence of any of intestinal parasites using standard laboratory methods. Multivariable logistic regression model using Adjusted Odds Ratio (AOR and 95% Confidence Interval (CI was fitted to analyze the independent predictors of intestinal parasitic infections. Result The mean age of the food handlers included in this study was 26.0 years. Of the total respondents, 72.5% were females, 63% have completed at least secondary school educational level. Five species of Intestinal Parasites (IPs were identified. The overall prevalence of being infected with at least one intestinal parasite was 14.5%, 95% CI (11.3, 18.0. The odds of being positive for at least one intestinal parasitic infection was 12.3 times higher among food handlers who practice medical checkup every 9 months compared to those who have a medical checkup every 3 months. The odds of being positive for intestinal parasitic infection was 3 times higher among food handlers with no formal education compared to those who have a level of education secondary school and above. Food handlers who

  12. Bioaccumulation of chemical warfare agents, energetic materials, and metals in deep-sea shrimp from discarded military munitions sites off Pearl Harbor

    Science.gov (United States)

    Koide, Shelby; Silva, Jeff A. K.; Dupra, Vilma; Edwards, Margo

    2016-06-01

    The bioaccumulation of munitions-related chemicals at former military deep-water disposal sites is poorly understood. This paper presents the results of human-food-item biota sampling to assess the potential for bioaccumulation of chemical warfare agents, energetic materials, arsenic, and additional munitions-related metals in deep-sea shrimp tissue samples collected during the Hawai'i Undersea Military Munitions Assessment (HUMMA) project to date. The HUMMA investigation area is located within a former munitions sea-disposal site located south of Pearl Harbor on the island of O'ahu, Hawai'i, designated site Hawaii-05 (HI-05) by the United States Department of Defense. Indigenous deep-sea shrimp (Heterocarpus ensifer) were caught adjacent to discarded military munitions (DMM) and at control sites where munitions were absent. Tissue analysis results showed that chemical warfare agents and their degradation products were not present within the edible portions of these samples at detectable concentrations, and energetic materials and their degradation products were detected in only a few samples at concentrations below the laboratory reporting limits. Likewise, arsenic, copper, and lead concentrations were below the United States Food and Drug Administration's permitted concentrations of metals in marine biota tissue (if defined), and their presence within these samples could not be attributed to the presence of DMM within the study area based on a comparative analysis of munitions-adjacent and control samples collected. Based on this current dataset, it can be concluded that DMM existing within the HUMMA study area is not contributing to the bioaccumulation of munitions-related chemicals for the biota species investigated to date.

  13. A survey of food hygiene knowledge and attitudes among Chinese food handlers in Fong Song Tong district.

    Science.gov (United States)

    Tang, C H; Fong, U W

    2004-01-01

    The purpose of this study was to find out the knowledge and attitudes concerning food hygiene among Chinese food handlers in Fong Song Tong district, and to analyze the impact of variables on the degree of knowledge and attitudes. Face-to-face interviews were conducted within Chinese food handlers in Fong Song Tong district using a self-designed questionnaire, which contained food hygiene knowledge and attitudes. Main knowledge outcome measures included food handling, personal hygiene and legislation issues. Questionnaires were completed by 580 (72.0%) Chinese food handlers from 91% premises of the district. 71.2% Chinese food handlers could respond correctly to eight or more out of 11 knowledge questions and 1.4% respondents only achieved full scores of knowledge. Fully correct response of personal hygiene knowledge was statistically and significantly higher than food handling knowledge (phygiene education. Male respondents, age less than 30, secondary education or above, five years or more of working experience, or who had previously attended a health training within the last two years, generally performed better on the knowledge of food hygiene. Chinese food handlers working in the kitchen and owners' beliefs on 'cleaning the kitchen before getting off duty' was reasonable. Those with secondary education at least, or who had prior participation in a health training within the last two years would need more food hygiene knowledge than the people aged over 30 or who were the owners. It would be more motivated by changing the traditional training model, community-based education in an optimum situation, additional authoritative information, attitudes and intentions of learning on food hygiene.

  14. Automation of metabolic stability studies in microsomes, cytosol and plasma using a 215 Gilson liquid handler.

    Science.gov (United States)

    Linget, J M; du Vignaud, P

    1999-05-01

    A 215 Gilson liquid handler was used to automate enzymatic incubations using microsomes, cytosol and plasma. The design of automated protocols are described. They were based on the use of 96 deep well plates and on HPLC-based methods for assaying the substrate. The assessment of those protocols was made with comparison between manual and automated incubations, reliability and reproducibility of automated incubations in microsomes and cytosol. Examples of the use of those programs in metabolic studies in drug research, i.e. metabolic screening in microsomes and plasma were shown. Even rapid processes (with disappearance half lives as low as 1 min) can be analysed. This work demonstrates how stability studies can be automated to save time, render experiments involving human biological media less hazardous and may be improve inter-laboratory reproducibility.

  15. Automated dried blood spots standard and QC sample preparation using a robotic liquid handler.

    Science.gov (United States)

    Yuan, Long; Zhang, Duxi; Aubry, Anne-Francoise; Arnold, Mark E

    2012-12-01

    A dried blood spot (DBS) bioanalysis assay involves many steps, such as the preparation of standard (STD) and QC samples in blood, the spotting onto DBS cards, and the cutting-out of the spots. These steps are labor intensive and time consuming if done manually, which, therefore, makes automation very desirable in DBS bioanalysis. A robotic liquid handler was successfully applied to the preparation of STD and QC samples in blood and to spot the blood samples onto DBS cards using buspirone as the model compound. This automated preparation was demonstrated to be accurate and consistent. However the accuracy and precision of automated preparation were similar to those from manual preparation. The effect of spotting volume on accuracy was evaluated and a trend of increasing concentrations of buspirone with increasing spotting volumes was observed. The automated STD and QC sample preparation process significantly improved the efficiency, robustness and safety of DBS bioanalysis.

  16. FOODBORNE VIRUSES AND FOOD HANDLERS TRAINING: A SPECIFIC PROJECT FOR OFFICIAL CONTROL

    Directory of Open Access Journals (Sweden)

    L. Tentenni

    2009-12-01

    Full Text Available The aim of this work is to describe the results of an official control project forwarded on the evaluation of prevention of foodborne viruses diseases. The authors describe the real diffusion of noroviruses and sapoviruses including their general features. The Official control carried out is focused on the valuation of specific prevention measures put in place by food business operators in order to avoid fecal-oral contaminations. Assessment on procedures on GMP, GHP and HACCP were followed by a specific valuation of food handlers training based on a questionnaire .The results show that in small and less developed food industries there is a lack in considering fecal-oral route contaminations and an important need of correct training aimed principally at improving knowledge of Good Hygienic Practices and contamination of food.

  17. Epidemiologic investigation of a Yersinia camp outbreak linked to a food handler.

    Science.gov (United States)

    Morse, D L; Shayegani, M; Gallo, R J

    1984-06-01

    In July 1981, an outbreak of gastroenteritis occurred at a summer diet camp. Of the 455 campers and staff, 35 per cent developed an illness characterized by abdominal pain, fever, diarrhea, and/or nausea and vomiting. A total of 53 per cent experienced abdominal pain. Seven persons were hospitalized, five of whom had appendectomies. Yersinia enterocolitica serogroup 0:8 was isolated from 37 (54 per cent) of 69 persons examined, including the camp cook and three assistants. An epidemiologic investigation demonstrated that illness was associated with consumption of reconstituted powdered milk and/or chow mein . Y. enterocolitica serogroup 0:8 was subsequently isolated from milk, the milk dispenser, and leftover chow mein . Information obtained during the investigation suggested that the Yersinia had been introduced by a food handler during food-processing procedures.

  18. Hepatitis A Cases Among Food Handlers: A Local Health Department Response-New York City, 2013.

    Science.gov (United States)

    Ridpath, Alison; Reddy, Vasudha; Layton, Marcelle; Misener, Mark; Scaccia, Allison; Starr, David; Stavinsky, Faina; Varma, Jay K; Waechter, HaeNa; Zucker, Jane R; Balter, Sharon

    During 2013, the New York City Department of Health and Mental Hygiene (DOHMH) received reports of 6 hepatitis A cases among food handlers. We describe our decision-making process for public notification, type of postexposure prophylaxis (PEP) offered, and lessons learned. For 3 cases, public notification was issued and DOHMH offered only hepatitis A vaccine as PEP. Subsequent outbreaks resulted from 1 case for which no public notification was issued or PEP offered, and 1 for which public notification was issued and PEP was offered too late. DOHMH continues to use environmental assessments to guide public notification decisions and offer only hepatitis A vaccine as PEP after public notification but recognizes the need to evaluate each situation individually. The PEP strategy employed by DOHMH should be considered because hepatitis A vaccine is immunogenic in all age groups, can be obtained by local jurisdictions more quickly, and is logistically easier to administer in mass clinics than immunoglobulin.

  19. Knowledge and Perception of Consumption of Iodized Salt Among Food Handlers in Southern Ethiopia.

    Science.gov (United States)

    Haji, Yusuf; Abdurahmen, Junayde; Paulos, Wondimagegn

    2016-01-01

    Iodine deficiency is the world's single most important cause of preventable mental retardation. In Ethiopia, the knowledge and perception of food handlers toward the iodized salt consumption (ISC) was very low. To assess knowledge and perception of food handlers toward consumption of iodized salt in Wolaita Sodo town and Sodo Zuria woreda, 2014. The community-based cross-sectional study design was done from May 10 to May 30, 2014 in Sodo town and Sodo Zuria woreda (district), Wolaita zone, southern Ethiopia. Systematic sampling techniques were used to identify study participants. Data entered into the software Epi Info version 3.5.3 and analyzed using the software SPSS version 16. To assess an association, odds ratio was used at 95% confidence interval, whereas confounding was controlled by employing multivariate logistic regression. Lower knowledge and perception on iodine deficiency was observed. About 239 (44.7%) of the respondents had good knowledge and 228 (42.6%) had positive attitude toward consumption of iodized salt. Most (346, 64.7%) of the participants had heard about goiter, whereas only 170 (31.8%) of them associated it with iodine deficiency. About 46.4% of respondents heard about iodized salt. Respondents' age, education, family income, place of residence, and occupation had significant association with good knowledge and positive attitude toward consumption of iodized salt. The study revealed the existence of knowledge and perception gap in iodine deficiency disorder and ISC. Household income, education of respondents, and place of residence were determinant factors for poor knowledge and perception of iodized salt. Therefore, efforts to scale-up the knowledge and perception toward ISC should focus on households with low income, educational level, and rural residence.

  20. Demonstration of Intelligent Control and Fan Improvements in Computer Room Air Handlers

    Energy Technology Data Exchange (ETDEWEB)

    Coles, Henry [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Greenberg, Steve [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Vita, Corinne [Vigilent, Oakland, CA (United States)

    2012-11-30

    This report documents a demonstration of the energy-efficiency improvement provided by a new control system for computer room air handling devices. It also analyzes measured and reported air handling device fan power associated with changing the fan type. A 135,000 square foot commercial data center was used for the demonstration. All air handling units were upgraded with improved efficiency fans, and a control system that automatically adjusts the fan speed for the air handling units was added. Power measurements were collected for a baseline and for a period with the fan speed control system active. Changing the fan type resulted in a savings of 47 percent of energy used by the air handling equipment and associated chiller plant energy needed to cool the air handlers themselves. The addition of the fan speed control resulted in an additional 37 percent savings in the same two categories. The combined savings for the two improvements for the same categories was 66 percent compared to the data center fitted with the original fans without a control system. The energy use reduction provided by the complete air handling device improvement program for the whole data center site is estimated to be 2.9 million kilowatt hours per year—an overall data center site savings of 8.0 percent. The reduced electrical energy use at the site provides a 1.9 million pound yearly reduction of carbon dioxide emissions. This demonstration showed that fan upgrades and a control system addition provide cost-effective improvements for data centers, with a payback reported to be under two years without utility incentives. In addition to the control system providing energy savings, the data collection and visual analysis capabilities provided immediate and long-term benefits. It is recommended that data center operators consider investing in fan upgrades and/or adding fan speed control for computer room air handlers.

  1. Evaluation of the metabolic fate of munitions material (TNT & RDX) in plant systems and initial assessment of material interaction with plant genetic material. Validation of the metabolic fate of munitions materials (TNT, RDX) in mature crops

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.J.; Harvey, S.D.; Cataldo, D.A.

    1995-09-01

    The goals of this effort were to confirm and expand data related to the behavior and impacts of munitions residues upon human food chain components. Plant species employed included corn (Zea mays), alfalfa (Medicago sativa). spinach (Spinacea oleraceae), and carrot (Daucus carota). Plants were grown from seed to maturity (70 to 120 days) in a low-fertility soil (Burbank) amended with either {sup 14}C-TNT or {sup 14}C-RDX at which time they were harvested and analyzed for munitions uptake, partitioning, and chemical form of the munition or munition-metabolite. All four of the plant species used in this study accumulated the {sup 14}C-TNT- and RDX-derived label. The carrot, alfalfa, and corn demonstrated a higher percentage of label retained in the roots (62, 73, and 83% respectively). The spinach contained less activity in its root (36%) but also contained the highest TNT specific activity observed (>4600 jig TNT equivalents/g dry wt.). The specific uptake values of RDX for the spinach and alfalfa were comparable to those previously reported for wheat and bean (314 to 590 {mu}g RDX-equivalents/g dry wt. respectively). An exception to this may be the carrot where the specific activity was found to exceed 4200 {mu}g RDX-equivalents/g dry wt. in the shoot. The total accumulation of TNT by the plants ranged from 1.24% for the spinach to 2.34% for the carrot. The RDX plants ranging from 15% for the spinach to 37% for the carrot. There was no identifiable TNT or amino dinitrotoluene (ADNT) isomers present in the plants however, the parent RDX compound was found at significant levels in the shoot of alfalfa (> 1 80 {mu}g/g) and corn (>18 {mu}g/g).

  2. Disposal of chemical agents and munitions stored at Umatilla Depot Activity, Hermiston, Oregon. Final Phase 1 environmental report

    Energy Technology Data Exchange (ETDEWEB)

    Zimmerman, G.P.; Hillsman, E.L.; Johnson, R.O.; Miller, R.L.; Patton, T.G.; Schoepfle, G.M.; Tolbert, V.R.; Feldman, D.L.; Hunsaker, D.B. Jr.; Kroodsma, R.L.; Morrissey, J.; Rickert, L.W.; Staub, W.P.; West, D.C.

    1993-02-01

    The Umatilla Depot Activity (UMDA) near Hermiston, Oregon, is one of eight US Army installations in the continental United States where lethal unitary chemical agents and munitions are stored, and where destruction of agents and munitions is proposed under the Chemical Stockpile Disposal Program (CSDP). The chemical agent inventory at UMDA consists of 11.6%, by weight, of the total US stockpile. The destruction of the stockpile is necessary to eliminate the risk to the public from continued storage and to dispose of obsolete and leaking munitions. In 1988 the US Army issued a Final Programmatic Environmental Impact Statement (FPEIS) for the CSDP that identified on-site disposal of agents and munitions as the environmentally preferred alternative (i.e., the alternative with the least potential to cause significant adverse impacts), using a method based on five measures of risk for potential human health and ecosystem/environmental effects; the effectiveness and adequacy of emergency preparedness capabilities also played a key role in the FPEIS selection methodology. In some instances, the FPEIS included generic data and assumptions that were developed to allow a consistent comparison of potential impacts among programmatic alternatives and did not include detailed conditions at each of the eight installations. The purpose of this Phase 1 report is to examine the proposed implementation of on-site disposal at UMDA in light of more recent and more detailed data than those included in the FPEIS. Specifically, this Phase 1 report is intended to either confirm or reject the validity of on-site disposal for the UMDA stockpile. Using the same computation methods as in the FPEIS, new population data were used to compute potential fatalities from hypothetical disposal accidents. Results indicate that onsite disposal is clearly preferable to either continued storage at UMDA or transportation of the UMDA stockpile to another depot for disposal.

  3. Analysis of Biota to Evaluate the Risks Associated with Chemical Warfare Materiel Present in Sea-Disposed Military Munitions to Human Health and the Environment

    Science.gov (United States)

    Briggs, C. W.; Bissonnette, M. C.; Edwards, M.; Shjegstad, S. M.

    2016-12-01

    Thousands of 100-lb M47A series bombs containing sulfur mustard were disposed in the ocean following World War II yet few studies have been conducted at sites in excess of 250 m, the depth where most discarded military munitions (DMM) were disposed. The Hawai`i Undersea Military Munitions Assessment (HUMMA) project was conducted to evaluate the risk from chemical warfare materiel (CWM) in DMM to human health, measuring ecological differences between the disposal area and nearby but otherwise similar areas, and evaluating the most efficient platforms for surveying DMM sea-disposal sites located at depths between 400-650 m. During the 2014 HUMMA Sampling Survey, the Jason 2 remotely operated vehicle was used to collect data. Shrimp were collected and analyzed to assess the potential for bioaccumulation of CWM, energetics and metals from munitions. No CWM was detected in H. ensifer tissue samples, indicating bioaccumulation is not occurring. Low levels of 2,4,6-trinitrotoluene, 4-amino-2,6-­dinitrotoluene, 1,3,5-trinitrobenzene, nitrobenzene, arsenic, copper, and lead were detected and the concentrations were not significantly different at DMM and control sites. No visible deformities, eroded fins, lesions, or tumors were observed on the shrimp living in the vicinity of M47A bombs. Given these results and under current and potential future uses of the HUMMA study area, health risks to likely receptors are within EPA acceptable levels. Photographic data and benthic infauna analysis were used to study benthic organisms that lived on or near munitions. There was no statistically distinguishable difference between organism distributions in dense and sparse munitions fields. Conventional munitions were found to have the greatest number of benthic infauna individuals, with control sites generally having the least number of individuals. This is consistent with the benthic macro-fauna analysis, which shows that munitions provide habitat.

  4. An integrated theoretical and experimental investigation of insensitive munition compounds adsorption on cellulose, cellulose triacetate, chitin and chitosan surfaces.

    Science.gov (United States)

    Gurtowski, Luke A; Griggs, Chris S; Gude, Veera G; Shukla, Manoj K

    2018-02-01

    This manuscript reports results of combined computational chemistry and batch adsorption investigation of insensitive munition compounds, 2,4-dinitroanisole (DNAN), triaminotrinitrobenzene (TATB), 1,1-diamino-2,2-dinitroethene (FOX-7) and nitroguanidine (NQ), and traditional munition compound 2,4,6-trinitrotoluene (TNT) on the surfaces of cellulose, cellulose triacetate, chitin and chitosan biopolymers. Cellulose, cellulose triacetate, chitin and chitosan were modeled as trimeric form of the linear chain of 4 C 1 chair conformation of β-d-glucopyranos, its triacetate form, β-N-acetylglucosamine and D-glucosamine, respectively, in the 1➔4 linkage. Geometries were optimized at the M062X functional level of the density functional theory (DFT) using the 6-31G(d,p) basis set in the gas phase and in the bulk water solution using the conductor-like polarizable continuum model (CPCM) approach. The nature of potential energy surfaces of the optimized geometries were ascertained through the harmonic vibrational frequency analysis. The basis set superposition error (BSSE) corrected interaction energies were obtained using the 6-311G(d,p) basis set at the same theoretical level. The computed BSSE in the gas phase was used to correct interaction energy in the bulk water solution. Computed and experimental results regarding the ability of considered surfaces in adsorbing the insensitive munitions compounds are discussed. Copyright © 2017. Published by Elsevier B.V.

  5. An epidemiological study on the predictors of health status of food handlers in food establishments of teaching hospitals of North India.

    Science.gov (United States)

    Singh, Arun; Katyal, Rashmi; Chaudhary, Varsha; Narula, Kusum; Upadhayay, Deepak; Singh, Shailendra Pratap

    2015-01-01

    The US Centers for Disease Control and Prevention (USDHHS-CDC 1996) revealed that the outbreaks of food borne diseases include inadequate cooking, heating, or re-heating of foods consumption of food from unsafe sources, cooling food inappropriately and allowing too much of a time lapse. As we all know that the food handlers have been working in various types of community kitchen and their health status can affect the status of food hygiene which can lead to contamination of foods attributing to acute gastroenteritis and food poisoning in various subgroups of the population e.g., medical/dental/nursing students. The background characteristics of these food handlers may have important role to affect health status of these handlers. The indexed study was carried out among the food handlers working in the food establishments the 5 teaching hospitals of Bareilly city in U.P. India during one year i.e., from August 2013 to July 2014. The survey method using schedule was conducted to get information about the background characteristics and food handlers and each food handler was examined clinically for assessing health status. Chi-Square test was used as test of significance and regression analysis was also done to nullifying the effect of confounders. The health status of the mess workers was found to be significantly associated with use of gloves, hand washing after toilet and hand washing before cooking and serving food. The rationale of this study was that though many studies have been carried out to show the health status of the food handlers and their background characteristics, no study has highlighted the association of these background characteristics and personal hygiene practices with the health status of food handlers.

  6. Advanced MicroObserver UGS integration with and cueing of the BattleHawk squad level loitering munition and UAV

    Science.gov (United States)

    Steadman, Bob; Finklea, John; Kershaw, James; Loughman, Cathy; Shaffner, Patti; Frost, Dean; Deller, Sean

    2014-06-01

    Textron's Advanced MicroObserver(R) is a next generation remote unattended ground sensor system (UGS) for border security, infrastructure protection, and small combat unit security. The original MicroObserver(R) is a sophisticated seismic sensor system with multi-node fusion that supports target tracking. This system has been deployed in combat theaters. The system's seismic sensor nodes are uniquely able to be completely buried (including antennas) for optimal covertness. The advanced version adds a wireless day/night Electro-Optic Infrared (EOIR) system, cued by seismic tracking, with sophisticated target discrimination and automatic frame capture features. Also new is a field deployable Gateway configurable with a variety of radio systems and flexible networking, an important upgrade that enabled the research described herein. BattleHawkTM is a small tube launched Unmanned Air Vehicle (UAV) with a warhead. Using transmitted video from its EOIR subsystem an operator can search for and acquire a target day or night, select a target for attack, and execute terminal dive to destroy the target. It is designed as a lightweight squad level asset carried by an individual infantryman. Although BattleHawk has the best loiter time in its class, it's still relatively short compared to large UAVs. Also it's a one-shot asset in its munition configuration. Therefore Textron Defense Systems conducted research, funded internally, to determine if there was military utility in having the highly persistent MicroObserver(R) system cue BattleHawk's launch and vector it to beyond visual range targets for engagement. This paper describes that research; the system configuration implemented, and the results of field testing that was performed on a government range early in 2013. On the integrated system that was implemented, MicroObserver(R) seismic detections activated that system's camera which then automatically captured images of the target. The geo-referenced and time-tagged Micro

  7. Sources of calicivirus contamination in foodborne outbreaks, Denmark, 2005-2011 - the role of the asymptomatic food handler

    DEFF Research Database (Denmark)

    Franck, Kristina T.; Lisby, Morten; Fonager, Jannik

    2015-01-01

    Background. Norovirus is the predominant cause of foodborne disease outbreaks. Virus contamination may occur during all steps of food processing from production to preparation and serving. The relative importance of these different routes of contamination is unknown. Methods. The purpose...... of contamination. Results. In 64 (34%) of the outbreaks, contamination from food handlers took place during preparation or serving of food. In the majority of these outbreaks (n=41; 64%), the food handlers were asymptomatic during food handling. Some had been in contact with ill household members before handling...... the food and remained asymptomatic; others developed symptoms shortly after or were post-symptomatic. In 51 (27%) of the outbreaks, contamination occurred during production of the food and in 55 (29%) of the outbreaks, contamination had supposedly occurred after serving via a guest at a self-serving buffet...

  8. 'Bringing respite in the burden of illness' - dog handlers' experience of visiting older persons with dementia together with a therapy dog.

    Science.gov (United States)

    Swall, Anna; Ebbeskog, Britt; Lundh Hagelin, Carina; Fagerberg, Ingegerd

    2016-08-01

    To illuminate meanings of the lived experiences of dog handlers' when visiting older persons with dementia with their therapy dog. Studies indicate that care of persons with dementia should focus on a person-centred approach with the person's interests in the centre. Animal-assisted therapy using a therapy dog in the care of persons with dementia has been shown to increase well-being and decrease problematic behaviours associated with the illness. A qualitative lifeworld approach was adopted for this study. Data were collected from open-ended interviews with nine dog handlers, and the analysis conducted using the phenomenological hermeneutical method. The structural analysis resulted in one theme, 'Respite from the burden of illness for persons with dementia'. Visiting a person with dementia can be seen as an act of caring, providing temporary respite from their illness, and creating a special relationship between handler and patient. A therapy dog visit can represent a moment of communion between the handler and the person with dementia. Dog handlers use their skills and knowledge to promote a situation that reduces symptoms of illness and encourages healthier behaviour. The results of this study may be of interest to researchers, clinical practitioners, caregivers and dog handlers who care for persons with dementia using therapy dog teams on prescription as an alternative method to minimise behavioural and psychological symptoms of dementia. © 2016 John Wiley & Sons Ltd.

  9. Socio-demographic Characteristics and Food Hygiene Level Assessment of Food Handlers in Cafeterias around a Federal University in Nigeria

    OpenAIRE

    C. E. Aruwa; A. J. Akindusoye; S. I. Awala

    2017-01-01

    Background and Objective: Globally, food hygiene/food borne illnesses remain subjects of great concern. This study sought to assess the knowledge, attitude and practice of food hygiene; and to determine the types, prevalence and load of microbial isolates among food handlers’ in cafeterias around a University in South-Western Nigeria. It also highlighted the socio-demographic characteristics of food handlers/respondents. Study Design: A cross sectional descriptive design was used, followe...

  10. Sleep Quality of Call Handlers Employed in International Call Centers in National Capital Region of Delhi, India

    Directory of Open Access Journals (Sweden)

    JD Raja

    2016-10-01

    suspicion of insomnia or suspected insomnia; the rest had no sleep problem. Smoking, poor social support, heavy workload, lack of relaxation facility at office, and prolonged travel time to office were independent predictors of sleep quality (p<0.05. Conclusion: Call handlers have to compromise upon their sleep owing to the contemporary work settings in call centers. Safeguarding their health becomes an occupational health challenge to public health specialists.

  11. Knowledge, attitudes and practices evaluation on food hygiene and safety among perishable food handlers from a hypermarket in Portugal

    OpenAIRE

    Pereira, Ermelinda; Pires, Delphine Elisa; Ramalhosa, Elsa

    2014-01-01

    The main objective of this study was to evaluate in loco the practices followed by the food handlers in three sections of a hypermarket, namely, butcher’s, charcuterie and fishery, as well as their level of knowledge, attitudes and practices in food hygiene and safety through the application of questionnaires. At the end it was also intended to relate the results with the training and professional experience, as well as demographic characteristics, such as sex, age and education level of food...

  12. An evaluation of a weightlifting belt and back injury prevention training class for airline baggage handlers.

    Science.gov (United States)

    Reddell, C R; Congleton, J J; Dale Huchingson, R; Montgomery, J F

    1992-10-01

    This study evaluated the efficacy of a commercially available weightlifting belt in relation to reduction of lumbar injury incident rate and severity of injuries over an 8-month period. The study used 642 baggage handlers working for a major airline company as participants. Four treatment groups were randomly selected: a group receiving the belt only, a group receiving a 1 h training class only, a group receiving both a belt and a 1 h training class, and a control group receiving nothing. Two treatment groups were added which contained participants who discontinued use of the belt prior to the end of an 8-month study period. Results indicated that there were no significant differences for total lumbar injury incident rate, restricted workday case injury incident rate, lost workdays and restricted workdays rate, and worker's compensation rates. There was, however, a marginal significant difference for lost workday case injury incident rate. Groups with participants who wore the belt for a while then discontinued its use had a higher lost day case injury incident rate than did either the group receiving training only or the control group. Compliance was an overriding factor as the belt questionnaire response indicated that 58% of participants in the belt groups discontinued use of the belt before the end of 8 months. Comments made on the survey forms indicated that the belt was too hot. Similarly, comments suggested that the belt rubbed, pinched, and bruised ribs. Based on these results, the weightlifting belt used for this study cannot be recommended for use in aid of lifting during daily work activities of baggage handlers. Results indicate that use of the belts may, in fact, increase the risk of injury when not wearing a belt following a period of wearing a belt. As industries are experimenting with the use of belts, it is recommended that great care be taken in any further evaluation and close attention directed towards injuries which occur when not wearing the

  13. Prevalence of intestinal parasitic infections in certified food-handlers working in food establishments in the City of Nairobi, Kenya.

    Science.gov (United States)

    Kamau, Paul; Aloo-Obudho, Penina; Kabiru, Ephantus; Ombacho, Kepha; Langat, Bernard; Mucheru, Obadiah; Ireri, Laban

    2012-03-01

    Most intestinal parasites are cosmopolitan with the highest prevalence in the tropics and subtopics. Rural-to-urban migration rapidly increases the number of food eating places in towns and their environs. Some of these eating estabishments have poor sanitation and are overcrowded, facilitating disease transmission, especially through food-handling. Our investigations in Nairobi, therefore, were set to determine the presence of intestinal parasites in food-handlers with valid medical certificates. Direct and concentrated stool processing techniques were used. Chisquare test and ANOVA were used for data analysis. The parasites Ascaris lumbricoides, Entamoeba histolytica and Giardia lamblia were observed in certified food-handlers. Significant difference was found in parasite frequency by eating classes and gender (χ(2) = 9.49, P = 0.73), (F = 1.495, P = 0.297), but not in parasite occurrence between age brackets (χ(2) = 6.99, P = 0.039). The six-month medical certificate validity period may contribute significantly to the presence of intestinal parasites in certified food-handlers.

  14. Occupational Exposure to Infection: A study on Healthcare Waste Handlers of a Tertiary Care Hospital in South India.

    Science.gov (United States)

    Shivalli, Siddharudha; Sowmyashree, H

    2015-11-01

    Occupational exposure to infection is an important public health concern. Such accidents are associated with a few, but pose significant risk to worker's health, family and the community. 1) To assess the knowledge and attitude of waste handlers regarding healthcare waste management in tertiary care hospital of Mangalore. 2) To assess the occupational risk of exposure to infection in their work setting. A cross-sectional study was conducted among healthcare waste handlers (involved in collection, storage and safe disposal) in a tertiary care hospital of Mangalore, India. A semi-structured and pre-tested proforma was used to assess respondents' knowledge and percentage score was calculated based on a scoring system. Chi square and independent sample t tests were applied to judge the association of study variables with knowledge and occupational risk of infection. A total of 43 healthcare waste handlers participated in the study and all were females. Almost half of them had poor knowledge (healthcare waste management. As much as 41.8% of them had exposure to healthcare waste and 'needle stick injury' was the most common type. Age, literacy and experience did not significantly (p>0.05) influence the knowledge and occupational risk of infection. Respondents' knowledge regarding healthcare waste management was unsatisfactory. They were at high risk of occupational exposure to infection. It emphasizes the need of refresher training and reinforcement of personal protection measures in their work setting. © Journal of the Association of Physicians of India 2011.

  15. Photochemical transformation of the insensitive munitions compound 2,4-dinitroanisole

    Energy Technology Data Exchange (ETDEWEB)

    Rao, Balaji, E-mail: anandharaob@ornl.gov [Environmental Sciences Division, Oak Ridge National Laboratory, Oak Ridge, TN (United States); Wang, Wei [Environmental Sciences Division, Oak Ridge National Laboratory, Oak Ridge, TN (United States); Cai, Qingsong; Anderson, Todd [Department of Environmental Toxicology, The Institute of Environment and Human Health, Texas Tech University, Lubbock, TX (United States); Gu, Baohua, E-mail: gub1@ornl.gov [Environmental Sciences Division, Oak Ridge National Laboratory, Oak Ridge, TN (United States)

    2013-01-15

    The insensitive munitions compound 2,4-dinitroanisole (DNAN) is increasingly being used as a replacement for traditional, sensitive munitions compounds (e.g., trinitrotoluene [TNT]), but the environmental fate and photo-transformation of DNAN in natural water systems are currently unknown. In this study, we investigated the photo-transformation rates of DNAN with both ultraviolet (UV) and sunlight irradiation under different environmentally relevant conditions. Sunlight photo-transformation of DNAN in water was found to follow predominantly pseudo-first-order decay kinetics with an average half-life (t{sub 1/2}) of approximately 0.70 d and activation energy (E{sub a}) of 53 kJ mol{sup −1}. Photo-transformation rates of DNAN were dependent on the wavelength of the light source: irradiation with UV-B light (280–315 nm) resulted in a greater quantum yield of transformation (ϕ{sub UV-B} = 3.7 × 10{sup −4}) than rates obtained with UV-A light (ϕ{sub UV-A} = 2.9 × 10{sup −4} at 316–400 nm) and sunlight (ϕ{sub sun} = 1.1 × 10{sup −4}). Photo-oxidation was the dominant mechanism for DNAN photo-transformation, based on the formation of nitrite (NO{sub 2}{sup −}) and nitrate (NO{sub 3}{sup −}) as major N species and 2,4-dinitrophenol as the minor species. Environmental factors (e.g., temperature, pH, and the presence or absence of naturally dissolved organic matter) displayed modest to little effects on the rate of DNAN photo-transformation. These observations indicate that sunlight-induced photo-transformation of DNAN may represent a significant abiotic degradation pathway in surface water, which may have important implications in evaluating the potential impacts and risks of DNAN in the environment. - Highlights: ► DNAN photo-transformation kinetics was dependent on light source and temperature. ► Photolysis produced harmful by-products that included dinitrophenol and nitrate. ► Photo-oxidation was determined to be the likely pathway of DNAN

  16. Bioconcentration factors and plant-water partition coefficients of munitions compounds in barley.

    Science.gov (United States)

    Torralba-Sanchez, Tifany L; Kuo, Dave T F; Allen, Herbert E; Di Toro, Dominic M

    2017-12-01

    Plants growing in the soils at military ranges and surrounding locations are exposed, and potentially able to uptake, munitions compounds (MCs). The extent to which a compound is transferred from the environment into organisms such as plants, referred to as bioconcentration, is conventionally measured through uptake experiments with field/synthetic soils. Multiple components/phases that vary among different soil types and affect the bioavailability of the MC, however, hinder the ability to separate the effects of soil characteristics from the MC chemical properties on the resulting plant bioconcentration. To circumvent the problem, this work presents a protocol to measure steady state bioconcentration factors (BCFs) for MCs in barley (Hordeum vulgare L.) using inert laboratory sand rather than field/synthetic soils. Three MCs: 2,4,6-trinitrotoluene (TNT), 2,4-dinitrotoluene (2,4-DNT), and 2,4-dinitroanisole (2,4-DNAN), and two munition-like compounds (MLCs): 4-nitroanisole (4-NAN) and 2-methoxy-5-nitropyridine (2-M-5-NPYNE) were evaluated. Approximately constant plant biomass and exposure concentrations were achieved within a one-month period that produced steady state log BCF values: 0.62 ± 0.02, 0.70 ± 0.03, 1.30 ± 0.06, 0.52 ± 0.03, and 0.40 ± 0.05 L kg plant dwt -1 for TNT, 2,4-DNT, 2,4-DNAN, 4-NAN, and 2-M-5-NPYNE, respectively. Furthermore, results suggest that the upper-bounds of the BCFs can be estimated within an order of magnitude by measuring the partitioning of the compounds between barley biomass and water. This highlights the importance of partition equilibrium as a mechanism for the uptake of MCs and MLCs by barley from interstitial water. The results from this work provide chemically meaningful data for prediction models able to estimate the bioconcentration of these contaminants in plants. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Multidrug Resistant Salmonella typhi in Asymptomatic Typhoid Carriers among Food Handlers in Namakkal District, Tamil Nadu

    Directory of Open Access Journals (Sweden)

    Senthilkumar B

    2005-01-01

    Full Text Available Purpose: to screen Salmonella typhi in asymptomatic typhoid carriers and to find out drug resistance and ability of the strains to transmit drug resistance to other bacteria. Methods: Cultural characters, biochemical tests, antibiotic sensitivity test (disc diffusion, agarose gel electrophoresis, and conjugation protocols were done. Thirty five stool samples were collected from the suspected food handlers for the study. Results: Among 35 samples, (17.14% yielded a positive result. Out of these 4 (20.0% were women and 2 (13.33% were men. The isolates were tested with a number of conventional antibiotics viz, amikacin, amoxicillin, ampicillin, chloramphenicol, ciprofloxacin, co-trimaxazole, rifampicin, gentamicin, nalidixic acid, ofloxacin and tetracycline. Five isolates were having the multidrug resistant character. Four (66.66% multidrug resistant isolates were found to have plasmids, while one (16.66% multidrug resistant isolate had no plasmid and the chromosome encoded the resistance. Only one strain (16.66% showed single antibiotic resistance in the study and had no plasmid DNA. The molecular weights of the plasmids were determined and found to be 120 kb.The mechanism of spreading of drug resistance through conjugation process was analyzed. In the conjugation studies, the isolates having R+ factor showed the transfer of drug resistance through conjugation, which was determined by the development of antibiotic resistance in the recipients. Conclusion: This study shows that drug resistant strains are able to transfer genes encoding drug resistance.

  18. Prevalence and risk factors for intestinal parasites in food handlers, southern Brazil.

    Science.gov (United States)

    Colli, Cristiane Maria; Mizutani, Angelica Sayuri; Martins, Vanessa Aparecida; Ferreira, Erika Cristina; Gomes, Mônica Lúcia

    2014-01-01

    In this study, the prevalence and risk factors for enteroparasites were determined in food handlers from Maringá, Paraná State, southern Brazil. Fecal and subungual materials of 150 street food vendors were analyzed by the methods of Lutz, Faust, and Mello, respectively. A questionnaire on hygiene and sanitary conditions of the workplace and of domicile was applied. The prevalence of enteroparasites was 28%, and the protozoa infection was more expressive (21.3%) than by helminths (6.7%), but without significant difference (p > 0.05). Entamoeba coli was the most frequent species occurring in 15.3%, while the prevalence of protozoa pathogenic was low (Giardia lamblia: 2.7% and Entamoeba histolytica: 0.7%). The subungual material presented negative results. The presence of pets in domiciles has increased twice the risk of infection. The working conditions of the majority of street food vendors were inappropriate. The results highlight the need for more rigorous programs of continuing education, parasitological examination every six months, and health surveillance. In this way, the quality of the service provided to the population can be improved and the transmission of food-borne diseases can be prevented.

  19. Them that believe: a postmodern exploration of the contemporary Christian serpent-handlers of Appalachia

    Directory of Open Access Journals (Sweden)

    Ralph W. Hood

    2009-01-01

    Full Text Available The call for a new paradigm is loud and clear and consistent with postmodern methods. They are no gold standard to be applied to all investigations; no master narrative to be defended. Interdisciplinary, as the author tries to demonstrate, can mean not only cooperation among disciplines, but also the use of a variety of often discipline favoured methods by a single investigator or a team of investigators whose location within a particular ‘discipline’ is both historically contingent and likely dated in terms of its usefulness. Likewise, the use of multilevel considerations means that the diversity of methods and approaches at various levels of abstraction are necessary to begin any study of religious phenomena in their immense complexity. This study of serpent handlers focuses upon archival research; hermeneutical explorations of textual criticism of the Bible; ethnography linked to videotapes; phenomenological interviews analyzed in terms of a hermeneutical method that reveals the meaningfulness of handling serpents, being anointed, and the experience of near death from serpent bites. The author is committed to exploring the meaning of serpent handling from personal and cultural perspectives, and also takes into account psychological theories to link the symbolic and sign value of serpents that further does justice to the power of the serpent to elicit genuine religious experiences and to serve as an apologetic for a tradition that has been maligned and misunderstood by lay persons and scholars alike.

  20. Musculoskeletal symptoms and ergonomic hazards among material handlers in grocery retail industries

    Science.gov (United States)

    Nasrull Abdol Rahman, Mohd; Zuhaidi, Muhammad Fareez Ahmad

    2017-08-01

    Grocery retail work can be physically demanding as material handler’s tasks involve manual lifting, lowering, carrying, pushing and pulling loads. The nature of this work puts them at a risk for serious low back pain, shoulder pain and other musculoskeletal injuries. This study was conducted by using two different types of tools which were Nordic Musculoskeletal Questionnaire (NMQ) as a survey and Washington Industrial Safety and Health Act (WISHA) Checklist as a direct observation method. Among 46 males and 14 females material handlers were involved throughout this study. For NMQ, the highest body part trouble in the last 12 months was low back pain (88.3%), followed by upper back (68.3%), neck (55.3%) and shoulder (36.7%). While for WISHA Checklist, most of them experienced hazard level involving awkward posture and high hand force. From the research conducted, musculoskeletal disorders (MSDs) and ergonomic risk factors (ERFs) do related as it showed that musculoskeletal disorders may arise if the workers ignored the safety in ergonomic hazards.

  1. Prevalence of intestinal parasites, salmonella and shigella among apparently health food handlers of Addis Ababa University student's cafeteria, Addis Ababa, Ethiopia.

    Science.gov (United States)

    Aklilu, Addis; Kahase, Daniel; Dessalegn, Mekonnen; Tarekegn, Negatu; Gebremichael, Saba; Zenebe, Seyfe; Desta, Kassu; Mulugeta, Gebru; Mamuye, Yeshiwodim; Mama, Mohammedaman

    2015-01-24

    Food contamination may occur at any point during its journey through production, processing, distribution, and preparation. The risk of food getting contaminated depends largely on the health status of the food handlers, their personal hygiene, knowledge and practice of food hygiene. Food borne diseases are a public health problem in developed and developing countries like Ethiopia. A cross sectional study was conducted among food handlers in Addis Ababa student's cafeteria from January to May 2013. Structured questionnaire was used to collect socio demographic data and associated risk factors. Stool specimens were examined for bacteria and intestinal parasites following standard procedures. Biochemical tests were done to identify the species of bacterial isolates. Sensitivity testing was done using Kirby- Baur disk diffusion method. A total of 172 food handlers were enrolled in the study. The majority of study participants were females 134 (77.9%). About 78 (45.3%) of food handlers were found to be positive for different intestinal parasites with the most abundant parasite of Entameoba histolytica/dispar 68 (70.8%) followed by Giardia lamblia 18 (18.8%), Taenia species 5 (5.2%), Ascaris lumbricoides 2 (2.1%), hookworm 2 (2.1%) and Trichuris trichiura 1 (1.1%). Stool cultures revealed 3.5% of Salmonella isolates (Sero-grouping on Salmonella isolate was not done), while Shigella species was not isolated from any of the stool samples obtained from Food handlers. All isolates of Salmonella were sensitive to ciprofloxacin, amikacin and gentamicin but resistant to ampicillin, clindamycin, and erythromycin. The present study revealed a high prevalence of intestinal parasite in asymptomatic (apparently health) food handlers. Such infected food handlers can contaminate food, drinks and could serve as source of infection to consumers via food chain.

  2. Effectiveness of an intervention package on knowledge, attitude, and practices of food handlers in a tertiary care hospital of north India: A before and after comparison study.

    Science.gov (United States)

    Dudeja, Puja; Singh, Amarjeet; Sahni, Nancy; Kaur, Sukhpal; Goel, Sonu

    2017-01-01

    Food-borne illnesses have been a recognized hazard for decades. Recent promulgation of Food Safety and Standards Act (FSSA), 2006, indicates the concern of our Govt. for food safety. Research on effectiveness of food safety interventions in our country is remarkably scarce. Hence, the present study was conducted in a tertiary care hospital of north India to create evidence-based results for food safety interventions. The study was before and after intervention trial which was registered with CTRI. Data collection was paperless using a software. All food handlers ( n  = 280) working inside the hospital were recruited. Intervention package comprised Self-Instructional Manual in Hindi for food handlers, short film for sensitization of food handlers on food safety titled 'Gravy Extra', and a documentary titled 'Food Safety from farm to Fork'. Chi square test, paired t test, and Wilcoxon sign rank test were used. The mean age of food handlers was 35 ± 2 years. Majority (61.7%) of food handlers were educated less than 10th standard. Nearly 60% of them had up to five years of experience. At base line majority (68.9%) had a fair knowledge about food safety issues. There was a significant improvement in food safety knowledge and practice score of food handlers after the intervention ( p  < 0.05). Their attitude toward food safety changed in a positive direction ( p  < 0.05). The intervention package was useful in improving the knowledge, creating a positive attitude and enhancing the food safety practices of food handlers working inside a tertiary care hospital.

  3. Formulation development and characterization of cellulose acetate nitrate based propellants for improved insensitive munitions properties

    Directory of Open Access Journals (Sweden)

    Thelma Manning

    2014-06-01

    Full Text Available Cellulose acetate nitrate (CAN was used as an insensitive energetic binder to improve the insensitive munitions (IM properties of gun propellants to replace the M1 propellant used in 105 mm artillery charges. CAN contains the energetic nitro groups found in nitrocellulose (NC, but also acetyl functionalities, which lowered the polymer's sensitivity to heat and shock, and therefore improved its IM properties relative to NC. The formulation, development and small-scale characterization testing of several CAN-based propellants were done. The formulations, using insensitive energetic solid fillers and high-nitrogen modifiers in place of nitramine were completed. The small scale characterization testing, such as closed bomb testing, small scale sensitivity, thermal stability, and chemical compatibility were done. The mechanical response of the propellants under high-rate uni-axial compression at, hot, cold, and ambient temperatures were also completed. Critical diameter testing, hot fragment conductive ignition (HFCI tests were done to evaluate the propellants' responses to thermal and shock stimuli. Utilizing the propellant chemical composition, theoretical predictions of erosivity were completed. All the small scale test results were utilized to down-select the promising CAN based formulations for large scale demonstration testing such as the ballistic performance and fragment impact testing in the 105 mm M67 artillery charge configurations. The test results completed in the small and large scale testing are discussed.

  4. Digital Device Architecture and the Safe Use of Flash Devices in Munitions

    Science.gov (United States)

    Katz, Richard B.; Flowers, David; Bergevin, Keith

    2017-01-01

    Flash technology is being utilized in fuzed munition applications and, based on the development of digital logic devices in the commercial world, usage of flash technology will increase. Digital devices of interest to designers include flash-based microcontrollers and field programmable gate arrays (FPGAs). Almost a decade ago, a study was undertaken to determine if flash-based microcontrollers could be safely used in fuzes and, if so, how should such devices be applied. The results were documented in the Technical Manual for the Use of Logic Devices in Safety Features. This paper will first review the Technical Manual and discuss the rationale behind the suggested architectures for microcontrollers and a brief review of the concern about data retention in flash cells. An architectural feature in the microcontroller under study will be discussed and its use will show how to screen for weak or failed cells during manufacture, storage, or immediately prior to use. As was done for microcontrollers a decade ago, architectures for a flash-based FPGA will be discussed, showing how it can be safely used in fuzes. Additionally, architectures for using non-volatile (including flash-based) storage will be discussed for SRAM-based FPGAs.

  5. Penetrating injury to the chest by an attenuated energy projectile: a case report and literature review of thoracic injuries caused by "less-lethal" munitions

    Directory of Open Access Journals (Sweden)

    Porto Leonardo BO

    2009-06-01

    Full Text Available Abstract We present the case of a patient who sustained a penetrating injury to the chest caused by an attenuated energy rubber bullet and review the literature on thoracic injuries caused by plastic and rubber "less-lethal" munitions. The patient of this report underwent a right thoracotomy to extract the projectile as well as a wedge resection of the injured lung parenchyma. This case demonstrates that even supposedly safe riot control munition fired at close range, at the torso, can provoke serious injury. Therefore a thorough investigation and close clinical supervision are justified.

  6. Penetrating injury to the chest by an attenuated energy projectile: a case report and literature review of thoracic injuries caused by "less-lethal" munitions.

    Science.gov (United States)

    Rezende-Neto, Joao; Silva, Fabriccio Df; Porto, Leonardo Bo; Teixeira, Luiz C; Tien, Homer; Rizoli, Sandro B

    2009-06-26

    We present the case of a patient who sustained a penetrating injury to the chest caused by an attenuated energy rubber bullet and review the literature on thoracic injuries caused by plastic and rubber "less-lethal" munitions. The patient of this report underwent a right thoracotomy to extract the projectile as well as a wedge resection of the injured lung parenchyma. This case demonstrates that even supposedly safe riot control munition fired at close range, at the torso, can provoke serious injury. Therefore a thorough investigation and close clinical supervision are justified.

  7. Prototype Systems for Measuring Outdoor Air Intake Rates in Rooftop Air Handlers

    Energy Technology Data Exchange (ETDEWEB)

    Fisk, William J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Chan, Wanyu R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hotchi, Toshifumi [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-01-01

    The widespread absence of systems for real-time measurement and feedback control, of minimum outdoor air intake rates in HVAC systems contributes to the poor control of ventilation rates in commercial buildings. Ventilation rates affect building energy consumption and influence occupant health. The project designed fabricated and tested four prototypes of systems for measuring rates of outdoor air intake into roof top air handlers. All prototypes met the ±20% accuracy target at low wind speeds, with all prototypes accurate within approximately ±10% after application of calibration equations. One prototype met the accuracy target without a calibration. With two of four prototype measurement systems, there was no evidence that wind speed or direction affected accuracy; however, winds speeds were generally below usually 3.5 m s-1 (12.6 km h-1) and further testing is desirable. The airflow resistance of the prototypes was generally less than 35 Pa at maximum RTU air flow rates. A pressure drop of this magnitude will increase fan energy consumption by approximately 4%. The project did not have resources necessary to estimate costs of mass produced systems. The retail cost of components and materials used to construct prototypes ranged from approximately $1,200 to $1,700. The test data indicate that the basic designs developed in this project, particularly the designs of two of the prototypes, have considerable merit. Further design refinement, testing, and cost analysis would be necessary to fully assess commercial potential. The designs and test results will be communicated to the HVAC manufacturing community.

  8. Job satisfaction among aircraft baggage handlers and their exposure to risk factors for work-related musculoskeletal disorders: A case study.

    Science.gov (United States)

    Bulduk, Sıdıka; Bulduk, Emre Özgür; Güler, Alpaslan

    2017-01-01

    Work-related musculoskeletal disorders (WMSDs) cause pain and economic loss. Risk of WMSDs is affected by job satisfaction as a psychosocial factor. The aim of this study was to investigate job satisfaction among aircraft baggage handlers and their exposure to work-related musculoskeletal disorder risk factors. Two data collection tools addressing risk levels (Quick Exposure Check) and psychosocial factors (Job Satisfaction Survey) were answered by 399 male baggage handlers employed in Esenboga International Airport in Ankara, Turkey. Risk exposure scores for WMSDs among baggage handlers were 27±3.4 (high) for the back (static), 42±7.2 (very high) for the back (moving), 42±6.1 (very high) for the shoulder/arm, 44±1.9 (very high) for the wrist/hand, and 13±5.1(high) for the neck. The average job satisfaction levels of the majority was either low (4.2250±1.10184) or moderate (3.1019±0.93352). In addition, low and moderate job satisfaction was significantly associated with higher WMSD risk levels among baggage handlers. Increased WMSD risk levels among baggage handlers are associated with low and moderate job satisfaction, suggesting that it is mandatory to perform intervention methods in this occupation.

  9. Mammalian Toxicity of Munition Compounds. Phase II. Effects of Multiple Doses. Part III. 2,6-Dinitrotoluene

    Science.gov (United States)

    1976-07-01

    and the neuromuscular effects in these dogs were not due to hypocalcemia . The lowest serum calcium concen- tration in these dogs was 4.2 meq/liter...motor end plate might produce a local hypocalcemia . Such a mechanism is purely speculative. Qualitatively and quantitavely, most of the effects of 2,6...I ýNw,- -MIM I/ MIDWEST RESEARCH INS14ITUTE H0q .3L I LU -_ MAMMALIAN TOXICITY OF MUNITIONS COMPOUlNDSPHASE II: EFFECTS OF MiULTIPLE DOSES C* •PART

  10. Post-traumatic stress disorder in adult victims of cluster munitions in Lebanon: a 10-year longitudinal study.

    Science.gov (United States)

    Fares, Jawad; Gebeily, Souheil; Saad, Mohamad; Harati, Hayat; Nabha, Sanaa; Said, Najwane; Kanso, Mohamad; Abdel Rassoul, Ronza; Fares, Youssef

    2017-08-18

    This study aims to explore the short-term and long-term prevalence and effects of post-traumatic stress disorder (PTSD) among victims of cluster munitions. A prospective 10-year longitudinal study that took place in Lebanon. Two-hundred-and-forty-four Lebanese civilian victims of submunition blasts, who were injured in 2006 and were over 18 years old, were interviewed. Included were participants who had been diagnosed with PTSD according to the Diagnostic and Statistical Manual of Mental Disorders, 5th Edition (DSM-5) and the PTSD Checklist - Civilian Version in 2006. Interviewees were present for the 10-year follow-up. PTSD prevalence rates of participants in 2006 and 2016 were compared. Analysis of the demographical data pertaining to the association of long-term PTSD with other variables was performed. p Values <0.05 were considered statistically significant for all analyses (95% CI). All the 244 civilians injured by cluster munitions in 2006 responded, and were present for long-term follow-up in 2016. The prevalence of PTSD decreased significantly from 98% to 43% after 10 years (p<0.001). A lower long-term prevalence was significantly associated with male sex (p<0.001), family support (p<0.001) and religion (p<0.001). Hospitalisation (p=0.005) and severe functional impairment (p<0.001) post-trauma were significantly associated with increased prevalence of long-term PTSD. Symptoms of negative cognition and mood were more common in the long run. In addition, job instability was the most frequent socioeconomic repercussion among the participants (88%). Psychological symptoms, especially PTSD, remain high in war-affected populations many years after the war; this is particularly evident for Lebanese civilians who were victimised by cluster munitions. Screening programmes and psychological interventions need to be implemented in vulnerable populations exposed to war traumas. Officials and public health advocates should consider the socioeconomic implications, and

  11. Computer-based test system for the Tactical Airfield Attack Munition (TAAM) safing, arming, and fuzing system

    International Nuclear Information System (INIS)

    Warhus, J.; Castleton, R.; Lanning, S.

    1981-12-01

    Testing and quality assurance of large numbers of firing systems are an essential part of the development of the Tactical Airfield Attack Munition (TAAM). A computerized test and data acquisition system has been developed to make the testing and quality assurance workload manageable. The system hardware utilizes an LSI-11/23 computer, a Tektronix 7612 transient digitizer, and various other programmable instruments and power supplies. The system is capable of measuring and analyzing mechanical shock and fireset transient waveforms, automating testing sequences, and making records and comparisons of the test results. The system architecture is flexible for general purpose firing system development work

  12. Safety of patient meals in 2 hospitals in Alexandria, Egypt before and after training of food handlers.

    Science.gov (United States)

    El Derea, H; Salem, E; Fawzi, M; Abdel Azeem, M

    2008-01-01

    We assessed the food safety knowledge and food handling practices of 23 food handlers in 2 hospitals in Alexandria, Egypt [Gamal Abdel Nasser (GAN) and Medical Research Institute (MRI)] before and after a food safety training programme, and also the bacteriological quality of patient meals and kitchen equipment. There was a significant improvement in all knowledge-associated parameters except for personal hygiene in GAN. There was an improvement in the food safety practices in both hospitals. The bacteriological quality of most patient meals and food preparation surfaces and utensils improved after training. The bacteriological quality of patients' meals served in GAN was generally better than that in MRI.

  13. Modeling midwave infrared muzzle flash spectra from unsuppressed and flash-suppressed large caliber munitions

    Science.gov (United States)

    Steward, Bryan J.; Perram, Glen P.; Gross, Kevin C.

    2012-07-01

    Time-resolved infrared spectra of firings from a 152 mm howitzer were acquired over an 1800-6000 cm-1 spectral range using a Fourier-transform spectrometer. The instrument collected primarily at 32 cm-1 spectral and 100 Hz temporal resolutions. Munitions included unsuppressed and chemically flash suppressed propellants. Secondary combustion occurred with unsuppressed propellants resulting in flash emissions lasting ˜100 ms and dominated by H2O and CO2 spectral structure. Non-combusting plume emissions were one-tenth as intense and approached background levels within 20-40 ms. A low-dimensional phenomenological model was used to reduce the data to temperatures, soot absorbances, and column densities of H2O, CO2, CH4, and CO. The combusting plumes exhibit peak temperatures of ˜1400 K, areas of greater than 32 m2, low soot emissivity of ˜0.04, with nearly all the CO converted to CO2. The non-combusting plumes exhibit lower temperatures of ˜1000 K, areas of ˜5 m2, soot emissivity of greater than 0.38 and CO as the primary product. Maximum fit residual relative to peak intensity are 14% and 8.9% for combusting and non-combusting plumes, respectively. The model was generalized to account for turbulence-induced variations in the muzzle plumes. Distributions of temperature and concentration in 1-2 spatial regions demonstrate a reduction in maximum residuals by 40%. A two-region model of combusting plumes provides a plausible interpretation as a ˜1550 K, optically thick plume core and ˜2550 K, thin, surface-layer flame-front. Temperature rate of change was used to characterize timescales and energy release for plume emissions. Heat of combustion was estimated to be ˜5 MJ/kg.

  14. Dentistry and food safety – the oral health of food handlers at a public hospital in the city of Belém, Pará

    Directory of Open Access Journals (Sweden)

    Elaine Beatriz Teixeira Ramalho

    2008-01-01

    Full Text Available Objective: This research evaluated the oral health of 40 food handlers in the Nutrition and Diet Unit of a public hospital in Belém-Pará. Methods: Interview and intra-oral examination of the subjects.Results: The results showed a high prevalence of tooth decay and periodontal disease, in addition to a low level of education and motivation as regards oral health care in the studied sample.Conclusion: The authors concluded that oral health care and education should be included in publications for and training of food handlers,since oral health promotion would benefit these workers directly, by increasing their quality of life, and indirectly benefit the entirecommunity that consumes the food prepared by them. The results and conclusions of this work should encourage the development of oralhealth care promotion programmers as regards this particular group of employees, the food handlers.

  15. Bacterial contamination of the hands of food handlers as indicator of hand washing efficacy in some convenient food industries in South Africa.

    Science.gov (United States)

    Aa, Lambrechts; Is, Human; Jh, Doughari; Jfr, Lues

    2014-07-01

    Hands of ready-to-eat food service employees have been shown to be vectors in the spread of foodborne disease, mainly because of poor personal hygiene and accounting for approximately 97% of food borne illnesses in food service establishments and homes. Our objective was to evaluate the efficacy of hand washing practices and sanitation before commencing work among food handlers in the convenient food industry in Gauteng, South Africa. A total of 230 samples were collected, involving 100% of the food handlers, in 8 selected convenient food outlets with their main focus on preparing ready-to-eat foods. The workers' cleaned and disinfected dominant hands were sampled for Total Plate Count (TPC), Staphylococcus aureus and Escherichia coli. Bacteria were isolated and counted using standard methods. The highest bacterial count from the hand samples was 7.4 x 10(3) cfu.cm(-2) and the lowest showed no detectable growth. Although hands with a count of 0 cfu.cm(-2) were found in all of the plants, the results indicated that all the plants exceeded the legal limit for food surfaces or hands of food handlers had no bacteria detectable on their hands. One sample tested positive for E. coli and S. aureus could not be detected on the hands of any of the food handlers. The study revealed that hand hygiene is unsatisfactory and may have serious implications for public health due to contamination of food from food handlers' hands. This therefore underlined the importance of further training to improve food handlers' knowledge of good hand washing practices.

  16. Knowledge, risk perception and mitigation measures towards Ebola virus disease by potentially exposed bushmeat handlers in north-central Nigeria: Any critical gap?

    Science.gov (United States)

    Alhaji, N B; Yatswako, S; Oddoh, E Y

    2018-02-01

    The bushmeat industry has been a topic of increasing importance among public health officials for its influence on zoonotic diseases transmission, such as Ebola virus disease (EVD), a rare and severe infectious disease of humans and non-human primates. This survey assessed knowledge/awareness, risk perceptions and mitigation practices towards EVD among bushmeat handlers in north-central Nigeria. These characteristics are premise to level of preparedness against appropriate risk prevention and control. A questionnaire-based cross-sectional study was conducted between January and December 2015 on 395 bushmeat handlers. Descriptive and analytical statistical analyses were performed using Epi-Info 3.5.3 software, and p knowledge than the hunters. Handlers with tertiary education were more likely (OR 3.22; 95% CI: 1.56-6.67) to possess significant satisfactory knowledge/awareness about EVD. Also, vendors were more likely (OR 1.85; 95% CI: 1.01-3.42) to practice satisfactory mitigation measures than the hunters. Only handlers with tertiary education were more likely (OR 2.48; 95% CI: 1.26-4.89) to significantly practice satisfactory mitigation measures against EVD. Although most of the handlers possessed significant knowledge/awareness about EVD, few applied mitigation measures against its infection, which is the challenging gap. There is a need for collaborations between the public health, veterinary and wildlife authorities in the provision of health information to bushmeat handlers on better management of emerging and re-emerging zoonotic viral diseases of wildlife origin. © 2017 Blackwell Verlag GmbH.

  17. Implementation of the NEMO model for estimating the spread of leakage from chemical munitions in the Baltic Sea - the first approach

    Science.gov (United States)

    Andrzejewski, Jan

    2017-04-01

    After the Second World War, during the Potsdam Conference a decision about demilitarization of Germany was made, and as a consequence, ammunition including chemical warfare agents (CWA) was dumped into the basins of the Baltic Sea. This type of weapon was stored in metal barrels that were under strong influence of electrochemical oxidation, also known as corrosion. Several tens years later, scientists were wondering what consequences for marine ecosystem could a leakage from this weapon bring. Although over 70 years passed since the Second World War, the influence of potential leakage of the CWA has not been properly estimated. Thus, the main goal of this work is to estimate dangerous area caused by potential leakage using the NEMO (Nucleus for European Modelling of the Ocean) ocean model. The NEMO ocean model is developed by the European Consortium including research institutes from France, England and Italy. The first step of this work is to implement the model for the area of the Baltic Sea. It requires generation of horizontal and vertical grid, bathymetry, atmospheric forces and lateral boundary conditions. Implemented model will have to be checked - it means it will have to pass a validation process. The Baltic Sea is one of the best measured sea in the World - as a consequence a lot of data are freely available for researchers. After validation and tuning up the model, implementation of passive tracer is planned. Passive tracer is the prognostic variable that could represent concentration of potential leakage and does not have influence on the density of the model. Based on distribution of the passive tracer, dangerous areas in the locations of dumpsites will be assessed. The research work was funded by the European Union (European Regional Development Fund) under the Interreg Baltic Sea Region Programme 2014-2020, project #R013 DAIMON (Decision Aid for Marine Munitions).

  18. GENE EXPRESSION CHANGES IN ARABIDOPSIS THALIANA SEEDLING ROOTS EXPOSED TO THE MUNITION HEXAHYDRO-1,3,5-TRINITRO-1,3,5-TRIAZINE

    Science.gov (United States)

    Arabidopsis thaliana root transcriptome responses to the munition, hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), were assessed using serial analysis of gene expression (SAGE). Comparison of the transcriptional profile for the RDX response to a profile previously described for Ar...

  19. An outbreak of Norwalk-like viral gastroenteritis in a frequently penalized food service operation: a case for mandatory training of food handlers in safety and hygiene.

    Science.gov (United States)

    Kassa, H

    2001-12-01

    In 1999, in Toledo, Ohio, an outbreak of gastroenteritis occurred among people who had attended a Christmas dinner banquet and had eaten food prepared by a local caterer. Overall, 93 of the 137 attendees (67.9 percent) reported illness. Eight sought medical care, and one was hospitalized. Case-control studies revealed that the illness was associated with eating tossed salad (odds ratio [OR] = 2.5, 95 percent confidence interval [CI] = 1.02-6.26). Eleven of 12 stool specimens that were taken from ill people tested positive for a Norwalk-like virus (NLV) but were negative for E. coli O157:H7, Salmonella, and Shigella. The primary source of the outbreak was not determined, but an infected food handler may have played a role in the transmission of the virus. The catering facility had been cited frequently for food safety and hygiene violations. None of the personnel or food handlers at this facility had been appropriately trained in safe food-handling practices, nor had the personnel at another local caterer that had prepared food items suspected of causing a multistate outbreak of NLVs. In Toledo, food service operations with trained personnel/food handlers received better inspection reports than food service operations without trained personnel and were less likely to contribute to foodborne outbreaks. Training of personnel and food handlers may be important for preventing outbreaks.

  20. High incidence of enteroaggregative Escherichia coli among food handlers in three areas of Kenya: a possible transmission route of travelers' diarrhea.

    Science.gov (United States)

    Oundo, Joseph O; Kariuki, Samuel M; Boga, Hamadi I; Muli, Faith W; Iijima, Yoshio

    2008-01-01

    Contaminated food and water are acknowledged vehicles for the transmission of travelers' diarrhea (TD). Importance of food handlers as reservoirs of enteroaggregative Escherichia coli (EAEC), enteropathogenic E coli (EPEC), and Shiga toxin-producing E coli (STEC) causing TD has not been clearly demonstrated. We undertook a 1-year prospective study to determine the presence and selected risk factors of carriage of EAEC, EPEC, and STEC by 1,399 food handlers working in tourist hotels in three popular tourist destinations of Kenya. Enterotoxigenic E coli (ETEC) was not sought in this study. During the period April 2003 to May 2004, EAEC harboring the aggR gene were detected from 29 (2.1%) subjects and EPEC harboring the eaeA gene and STEC harboring the stx2 gene were detected from 11 (0.8%) and 2 (0.1%) of the study subjects, respectively. Mean age of subjects with EAEC was significantly lower (24.6 y) than the rest of the study population (28.2 y) (p tourist hotels are important carriers of EAEC that could cause TD and a high proportion of the EAEC are MDR. The isolation of MDR EAEC from food handlers working in tourist hotels is of potential public health importance. There is a need for a study employing molecular methods including PFGE to examine carriage of similar pathogens in food handlers, processed foods, and travelers consuming the food who develop diarrhea.

  1. Estimated exposure of hands inside the protective gloves used by non-occupational handlers of agricultural pesticides.

    Science.gov (United States)

    Beránková, Martina; Hojerová, Jarmila; Peráčková, Zuzana

    2017-11-01

    Exposure of handlers'/operators' hands is a main route of agricultural pesticides entry into their body. Non-occupational handlers still lack information about appropriate selection of protective gloves to minimize exposure and reduce adverse effects of these chemicals. According to the results of our previous survey, six commercially available, water-resistant gloves commonly used by non-professional gardeners were evaluated for permeation of Acetamiprid, Pirimicarb, and Chlorpyrifos-methyl (Chlorp-m) pesticides by means of in vitro testing. In-use conditions were mimicked as close as possible. Chlorp-m through latex was observed inside the glove from >10 to ⩽15 min; however, Acetamiprid and Pirimicarb through neoprene/latex and all the three pesticides through butyl were not observed inside gloves for the duration of the experiments (the Breakthrough time (BT)>8 h). The 1-h exposure proved the interior glove contamination with Chlorp-m through disposable latex, vinyl, and nitrile gloves (51, 33, and 41% of applied dose (AD), respectively) just as with Acetamiprid and Pirimicarb through latex glove (11 and 14%AD, respectively). However, when storing the used gloves for 4 days after the exposure, no release of the three pesticides from the butyl and Acetamiprid from neoprene/latex gloves was detected. In all other cases, pesticides were found in the interior glove (36-79, 31-63, and 51-81%AD for Acetamiprid, Pirimicarb, and Chlorp-m, respectively). If used repeatedly, gloves contaminated in this way lose their protective function but give the user a false sense of security. The results suggest that (i) water-resistant gloves are not necessarily pesticide resistant; (ii) disposable latex gloves commonly worn by non-professional gardeners provide inadequate protection even for a short-time contact with pesticides; (iii) to assess the efficiency of reusable gloves, not only BT value but also the reservoir/release effect of parent pesticide and its degradation

  2. Estimation of the potential leakage of the chemical munitions based on two hydrodynamical models implemented for the Baltic Sea

    Science.gov (United States)

    Jakacki, Jaromir; Golenko, Mariya

    2014-05-01

    Two hydrodynamical models (Princeton Ocean Model (POM) and Parallel Ocean Program (POP)) have been implemented for the Baltic Sea area that consists of locations of the dumped chemical munitions during II War World. The models have been configured based on similar data source - bathymetry, initial conditions and external forces were implemented based on identical data. The horizontal resolutions of the models are also very similar. Several simulations with different initial conditions have been done. Comparison and analysis of the bottom currents from both models have been performed. Based on it estimating of the dangerous area and critical time have been done. Also lagrangian particle tracking and passive tracer were implemented and based on these results probability of the appearing dangerous doses and its time evolution have been presented. This work has been performed in the frame of the MODUM project financially supported by NATO.

  3. Assessment of knowledge, attitude and practice of food allergies among food handlers in the state of Penang, Malaysia.

    Science.gov (United States)

    Shafie, A A; Azman, A W

    2015-09-01

    Food handler's knowledge, attitude and practice regarding food allergies are important to prevent debilitating and sometimes fatal reactions. This study aimed to assess their food allergy knowledge, attitude and practice, which could help to maintain the safety and hygiene of food consumed by the public. Cross-sectional survey. A cross-sectional survey involving 121 conveniently sampled (81.76% response rate) respondents among the food handlers in the state of Penang, Malaysia, was conducted using a validated self-administered questionnaire. Their knowledge, attitude and work practice were captured using a 37-item questionnaire that elicited their responses using a mixture of closed-ended and Likert scale techniques. The mean knowledge score for respondents was 50.23 (SD = 14.03), attitude score was 54.26 (SD = 11.67) and practice score was 45.90 (SD = 24.78). Only 1.79% of the respondents were considered to have excellent knowledge, 21.37% had a low risk practice and 4.27% had positive attitudes towards food allergies. Most of the respondents (70%) knew about food allergies and their seriousness. There was a statistically significant correlation between the attitude and practice of respondents (r = 0.51). The type of establishment was the only characteristic significantly associated (P safety training programmes is needed to reduce food allergy risks and prevent fatal allergic reactions to food among their customers. Copyright © 2015 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

  4. Arsenal of democracy in the face of change: Precision Guided Munitions (PGMs), their evolution and some economic considerations, Working Paper No. 4

    Energy Technology Data Exchange (ETDEWEB)

    Chester, C.V.

    1990-08-01

    A brief study was made of some of the forces driving the move to Precision Guided Munitions (PGMs), including the quest for military effectiveness, combat experience, and logistic compression. PGMs cost from a few hundred to a few thousand dollars per Kg but are tens to hundreds of times more effective than conventional munitions. A year's peacetime plateau production of each US PGM can be carried by a few C-5 aircraft. Surge quantities of PGMs are within US airlift capabilities, taking some of the risk out of off-shore procurement. The improving capability of antiaircraft PGMs and the escalating cost of combat aircraft (50 to 100-fold in constant dollars since WW II) may bring into question the economic viability of manned attack aircraft. The same may be true to a slightly lesser degree for heavy armored vehicles. 14 refs., 5 tabs.

  5. Arsenic and Old Mustard: Chemical Problems of Old Arsenical and 'Mustard' Munitions (Joseph F. Bunnett and Marian Mikotajczyk, Eds.)

    Science.gov (United States)

    Garrett, Benjamin

    1999-10-01

    What do Knute Rockne, Notre Dame's famed football coach, and Lewisite, a chemical warfare agent dubbed "the dew of death", have in common? Both owe their discovery to Father Julius Arthur Nieuwland.1 Rockne's legacy lives on in the Fighting Irish and their tradition of excellence on the gridiron. Lewisite, together with other arsenical- and mustard-type chemical warfare agents, provide a legacy that lives on, too, but with less cheerful consequences. The book Arsenic and Old Mustard: Chemical Problems of Old Arsenical and 'Mustard' Munitions makes clear the challenges faced in dealing with those consequences. This book documents the proceedings of a workshop devoted to arsenical- and mustard-type chemical warfare agents and their associated munitions. The workshop, held in Poland in 1996, included nine lectures, eight posters, and three discussion groups; and the contents of all these are presented. Major support for the workshop came from the Scientific Affairs Division of NATO as part of on ongoing series of meetings, cooperative research projects, and related efforts dealing with problems leftover from the Cold War and, in the case of the arsenicals and mustards, from conflicts dating to World War I. These problems can be seen in contemporary accounts, including a January 1999 news report that the U.S. Department of Defense intends to survey Washington, DC, areas near both American University and the Catholic University of America (CUA), site of the original synthesis of Lewisite, for chemical warfare agents and other materials disposed at the end of World War I.2 The first nine chapters of the book present the workshop's lectures. Of these, readers interested in chemical weapon destruction might find especially useful the first chapter, in which Ron Mansley of the Organisation for the Prohibition of Chemical Weapons presents a scholarly overview covering historical aspects of the arsenicals and mustards; their production and use; prospective destruction

  6. Munitions and Explosives of Concern Survey Methodology and In-field Testing for Wind Energy Areas on the Atlantic Outer Continental Shelf

    Science.gov (United States)

    DuVal, C.; Carton, G.; Trembanis, A. C.; Edwards, M.; Miller, J. K.

    2017-12-01

    Munitions and explosives of concern (MEC) are present in U.S. waters as a result of past and ongoing live-fire testing and training, combat operations, and sea disposal. To identify MEC that may pose a risk to human safety during development of offshore wind facilities on the Atlantic Outer Continental Shelf (OCS), the Bureau of Ocean Energy Management (BOEM) is preparing to develop guidance on risk analysis and selection processes for methods and technologies to identify MEC in Wind Energy Areas (WEA). This study developed a process for selecting appropriate technologies and methodologies for MEC detection using a synthesis of historical research, physical site characterization, remote sensing technology review, and in-field trials. Personnel were tasked with seeding a portion of the Delaware WEA with munitions surrogates, while a second group of researchers not privy to the surrogate locations tested and optimized the selected methodology to find and identify the placed targets. This in-field trial, conducted in July 2016, emphasized the use of multiple sensors for MEC detection, and led to further guidance for future MEC detection efforts on the Atlantic OCS. An April 2017 follow on study determined the fate of the munitions surrogates after the Atlantic storm season had passed. Using regional hydrodynamic models and incorporating the recommendations from the 2016 field trial, the follow on study examined the fate of the MEC and compared the findings to existing research on munitions mobility, as well as models developed as part of the Office of Naval Research Mine-Burial Program. Focus was given to characterizing the influence of sediment type on surrogate munitions behavior and the influence of mophodynamics and object burial on MEC detection. Supporting Mine-Burial models, ripple bedforms were observed to impede surrogate scour and burial in coarse sediments, while surrogate burial was both predicted and observed in finer sediments. Further, incorporation of

  7. Assessing communication skills of clinical call handlers working at an out-of-hours centre: development of the RICE rating scale.

    Science.gov (United States)

    Derkx, Hay P; Rethans, Jan-Joost E; Knottnerus, J André; Ram, Paul M

    2007-05-01

    Out-of-hours centres provide telephone support to patients with medical problems. In most of these centres specially-trained nurses handle incoming telephone calls. They assess patients' needs, the degree of urgency, and determine the level of care required. Assessment of the medical problem and the quality of 'care-by-phone' depend on the medical and communication skills of the call handlers. To develop a valid, reliable, and practical rating scale to evaluate the communication skills of call handlers working at an out-of-hours centre and to improve quality of communication. Qualitative study with focus groups followed by validation of the rating scale and measurement of reliability (internal consistency). Out-of-hours centres in the Netherlands. A focus group developed the rating scale. Experts with experience in training and evaluating communication skills of medical students and GPs commented on the scale to ensure content validity. The reliability of the rating scale was tested in a pilot in which ten specially-trained assessors scored six telephone calls each. The scale, known as the RICE rating scale, has 17 items divided over four different phases of the telephone consultation: Reason for calling; Information gathering; Conclusion; and Evaluation (RICE). Content validity of the scale was assessed by two experts. Reliability of the scale tested in the pilot was 0.73 (Cronbach's alpha). Establishing a rating scale to assess the communication skills of call handlers which meets common scientific demands, such as content validity and reliability, proved successful. This instrument can be used to give feedback to call handlers.

  8. A Study of impact of Education on Awareness, Personal Hygiene and Practices of food handlers of a Tertiary Care Hospital in Kashmir, India

    OpenAIRE

    Hina; Wani MA; Rehana K; Jan Farooq; Pandita K.K

    2013-01-01

    Background Each year 9.4 million people suffer from food borne diseases throughout the world; everyday cases related to food borne diseases are recorded in all countries from the most to the least developed ones. A major risk of food contamination lies with the food handlers.Several food borne disease outbreaks have been reported to have been associated with poor personal hygiene of people handling food stuffs. Method A questionnaire was structured for the purpose of data collection to find ...

  9. A Study of impact of Education onAwareness, Personal Hygiene and Practices of food handlers of a Tertiary Care Hospital in Kashmir, India

    OpenAIRE

    Pandita K.K

    2013-01-01

    Background Each year 9.4 million people suffer from food borne diseases throughout the world; everyday cases related to food borne diseases are recorded in all countries from the most to the least developed ones. A major risk of food contamination lies with the food handlers.Several food borne disease outbreaks have been reported to have been associated with poor personal hygiene of people handling food stuffs. Method A questionnaire was structured for the purpose of data collection to fin...

  10. Culture versus PCR for Salmonella Species Identification in Some Dairy Products and Dairy Handlers with Special Concern to Its Zoonotic Importance.

    Science.gov (United States)

    Gwida, Mayada M; Al-Ashmawy, Maha A M

    2014-01-01

    A total of 200 samples of milk and dairy products as well as 120 samples of dairy handlers were randomly collected from different dairy farms and supermarkets in Dakahlia Governorate, Egypt. The conventional cultural and serotyping methods for detection of Salmonella in dairy products were applied and the results were compared with those obtained by molecular screening assay using (ttr sequence). The obtained results revealed that 21% of milk and dairy products (42/200) were positive for Salmonella species using enrichment culture-based PCR method, while 12% of different dairy samples (24/200) were found to be positive for Salmonella species by using the conventional culture methods. Two stool specimens out of 40 apparently healthy dairy handlers were positive by the PCR method. Serotyping of Salmonella isolates revealed that 58.3% (14/24) from different dairy products were contaminated with Salmonella Typhimurium. We conclude that the enrichment culture-based PCR assay has high sensitivity and specificity for detection of Salmonella species in dairy products and handlers. High incidence of Salmonella Typhimurium in the examined dairy samples highlights the important role played by milk and dairy products as a vehicle in disease prevalence. Great effort should be applied for reducing foodborne risk for consumers.

  11. Sources of Calicivirus contamination in foodborne outbreaks in Denmark, 2005-2011--the role of the asymptomatic food handler.

    Science.gov (United States)

    Franck, Kristina T; Lisby, Morten; Fonager, Jannik; Schultz, Anna C; Böttiger, Blenda; Villif, Annette; Absalonsen, Helle; Ethelberg, Steen

    2015-02-15

    Norovirus (NoV) is the predominant cause of foodborne disease outbreaks. Virus contamination may occur during all steps of food processing, from production to preparation and serving. The relative importance of these different routes of contamination is unknown. The purpose of this study was to estimate the proportions of outbreaks caused by asymptomatic and symptomatic food handlers (FHs). Reports of foodborne NoV and sapovirus outbreaks (n=191) that occurred over a 7-year period were extracted, reviewed, and categorized according to the available evidence for source of contamination. In 64 (34%) of the outbreaks, contamination from FHs took place during preparation or serving of food. In the majority of these outbreaks (n=41; 64%), the FHs were asymptomatic during food handling. Some had been in contact with ill household members before handling the food and remained asymptomatic; others developed symptoms shortly after or were post-symptomatic. In 51 (27%) of the outbreaks, contamination occurred during production of the food, and in 55 (29%) of the outbreaks, contamination had supposedly occurred after serving a guest at a self-serve buffet. Guidelines regarding exclusion of FHs where household members suffer from gastroenteritis could limit the number of outbreaks. © The Author 2014. Published by Oxford University Press on behalf of the Infectious Diseases Society of America. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  12. Molecular differentiation of Entamoeba histolytica and Entamoeba dispar from Tunisian food handlers with amoeba infection initially diagnosed by microscopy

    Directory of Open Access Journals (Sweden)

    Ben Ayed S.

    2008-03-01

    Full Text Available The purpose of the study was to obtain more reliable epidemiological data concerning Entamoeba (E. histolytica infection in Tunisian food handlers using established molecular tools able to differentiate E. histolytica from E. dispar. From 2002 to 2005, 4,266 fresh stools specimens received in the setting of the National program of food handlers’ control were analysed by optical microscopy. Twelve (2.8 ‰ were positive for the presence of four nuclei cysts identified as E. histolytica/E. dispar. Extraction of DNA from the 12 samples, followed by specific amplifications of E. histolytica and E. dispar SSU rDNA, showed that 11 samples (92% were positive for E. dispar and negative for E. histolytica. Sequencing analysis of 8 PCR products permitted to verify the results obtained with conventional PCR. The remaining sample was negative by PCR amplifying E. histolytica DNA or E. dispar DNA specifically, although it did not show any inhibition. It probably contains protozoan cysts genetically distinct from these two species but morphological similar. Estimation of relative proportions between E. histolytica and E. dispar in cyst carriers showed that all explored individuals harboured the non pathogenic E. dispar strains. This result highlights the need of use in this population of complementary tests that allow specific diagnosis and obviate unnecessary chemotherapy.

  13. Penetration Evaluation of Explosively Formed Projectiles Through Air and Water Using Insensitive Munition: Simulative and Experimental Studies

    Directory of Open Access Journals (Sweden)

    M. Ahmed

    2016-02-01

    Full Text Available The process of formation, flying, penetration of explosively-formed projectiles (EFP and the effect of water on performance of the charge for underwater applications is simulated by Ansysis Autodyn 2D-Hydro code. The main objective of an explosively formed projectile designed for underwater applications is to disintegrate the target at longer standoff distances. In this paper we have simulated the explosively formed projectile from OFHC-Copper liner for 1200 conical angle. The Affect of water on the penetration of EFP is determined by simulations from Ansysis Autodyn 2-D Hydrocode and by varying depth of water from 1CD-5CD. The depth of penetration against steel target is measured experimentally. Flash X-Ray Radiography (FXR is used to capture EFP jet formation and its penetration against target is measured by depth of penetration experiments. Simulation results are compared with experimental results. The difference in simulated and experimental results for depth of penetration is about 7 mm, which lies within favorable range of error. The jet formation captured from FXR is quite clear and jet velocity determined from Flash X-ray radiography is the same as the ones obtained by using other high explosives. Therefore, it is indicated that Insensitive Munition (8701 can be utilized instead of Polymer Bonded Explosives (PBX for air and underwater environments with great reliability and without any hazard.

  14. Benthic communities in chemical munitions dumping site areas within the Baltic deeps with special focus on nematodes

    Science.gov (United States)

    Kotwicki, Lech; Grzelak, Katarzyna; Bełdowski, Jacek

    2016-06-01

    Assessment of biological effects of chemical warfare agents (CWAs) dumped in the Baltic Sea has been one of the tasks of the Chemical Munitions Search & Assessment (CHEMSEA) project. Three sites have been selected for investigation: Bornholm Deep, Gotland Deep and Gdansk Deep. Fauna collected from these locations were compared with the reference area located between the studied regions at similar depths below 70 m. In total, four scientific cruises occurred in different seasons between 2011 and 2013. The total lack of any representatives of macrozoobenthos in all of the investigated dumping sites was noted. As a practical matter, the Baltic deeps were inhabited by nematodes as the only meiofauna representatives. Therefore, nematodes were used as a key group to explore the faunal communities inhabiting chemical dumping sites in the Baltic deeps. In total, 42 nematode genera belonging to 18 families were identified, and the dominant genus was Sabatieria (Comesomatidae), which constituted 37.6% of the overall nematode community. There were significant differences in nematode community structure (abundance and taxa composition) between the dumping areas and the reference site (Kruskal-Wallis H=30.96, pnematode assemblages could mirror the environmental conditions.

  15. Disposal of chemical agents and munitions stored at Pueblo Depot Activity, Colorado. Final, Phase 1: Environmental report

    Energy Technology Data Exchange (ETDEWEB)

    Terry, J.W.; Blasing, T.J.; Ensminger, J.T.; Johnson, R.O.; Schexnayder, S.M.; Shor, J.T.; Staub, W.P.; Tolbert, V.R.; Zimmerman, G.P.

    1995-04-01

    Under the Chemical Stockpile Disposal Program (CSDP), the US Army proposes to dispose of lethal chemical agents and munitions stored at eight existing Army installations in the continental United States. In 1988, the US Army issued the final programmatic environmental impact statement (FPEIS) for the CSDP. The FPEIS and the subsequent Record of Decision (ROD) identified an on-site disposal process as the preferred method for destruction of the stockpile. That is, the FPEIS determined the environmentally preferred alternative to be on-site disposal in high-temperature incinerators, while the ROD selected this alternative for implementation as the preferred method for destruction of the stockpile. In this Phase I report, the overall CSDP decision regarding disposal of the PUDA Stockpile is subjected to further analyses, and its validity at PUDA is reviewed with newer, more detailed data than those providing the basis for the conclusions in the FPEIS. The findings of this Phase I report will be factored into the scope of a site-specific environmental impact statement to be prepared for the destruction of the PUDA stockpile. The focus of this Phase I report is on those data identified as having the potential to alter the Army`s previous decision regarding disposal of the PUDA stockpile; however, several other factors beyond the scope of this Phase I report must also be acknowledged to have the potential to change or modify the Army`s decisions regarding PUDA.

  16. A Study of impact of Education on Awareness, Personal Hygiene and Practices of food handlers of a Tertiary Care Hospital in Kashmir, India

    Directory of Open Access Journals (Sweden)

    Hina

    2013-05-01

    Full Text Available Background Each year 9.4 million people suffer from food borne diseases throughout the world; everyday cases related to food borne diseases are recorded in all countries from the most to the least developed ones. A major risk of food contamination lies with the food handlers.Several food borne disease outbreaks have been reported to have been associated with poor personal hygiene of people handling food stuffs. Method A questionnaire was structured for the purpose of data collection to find out effect of educational background on personal hygiene, awareness regarding transmission of food borne infections and routine practices among food handler of the food establishments of a super speciality teaching hospital of Kashmir. Results Out of 121 respondents (33.05 percent cooks, 42.97 percent stewards and 23.97 percent dishwashers, 90.90 percent were males and 9.10 percent females. Majority (90.90 percent have educational background below high school level (group B and the rest (9.10% have education above 10th standard (group A. Soap was used by majority(90.9% of group A in comparison to group B(59.1% before entering kitchen.72.7% of group A employees change their shoes and use kitchen slippers in the kitchen, whereas only 31.8% of group B employees do so and the rest(68.2% do not change the foot wear before entering the kitchen.While 81.8% of group A employees responded that diarrhoeal diseases spread by contaminated food,majority of group B(62.7% responded other reasons.81.8% of group A feel it necessary to chlorinate or filter visibly clean water, whereas only 52.7% of group B feel so. Conclusion Food handlers of any food establishment, in particular hospital kitchen should have high standard of educational background to have enough awareness regarding food borne diseases and importance of personal hygiene to prevent transmission of diseases. Because of poor educational background, the food handlers in our study didn’t know the importance of use

  17. A Study of impact of Education onAwareness, Personal Hygiene and Practices of food handlers of a Tertiary Care Hospital in Kashmir, India

    Directory of Open Access Journals (Sweden)

    Pandita K.K

    2013-01-01

    Full Text Available Background Each year 9.4 million people suffer from food borne diseases throughout the world; everyday cases related to food borne diseases are recorded in all countries from the most to the least developed ones. A major risk of food contamination lies with the food handlers.Several food borne disease outbreaks have been reported to have been associated with poor personal hygiene of people handling food stuffs. Method A questionnaire was structured for the purpose of data collection to find out effect of educational background on personal hygiene, awareness regarding transmission of food borne infections and routine practices among food handler of the food establishments of a super speciality teaching hospital of Kashmir. Results Out of 121 respondents (33.05 percent cooks, 42.97 percent stewards and 23.97 percent dishwashers, 90.90 percent were males and 9.10 percent females. Majority (90.90 percent have educational background below high school level (group B and the rest (9.10% have education above 10th standard (group A. Soap was used by majority(90.9% of group A in comparison to group B(59.1% before entering kitchen.72.7% of group A employees change their shoes and use kitchen slippers in the kitchen, whereas only 31.8% of group B employees do so and the rest(68.2% do not change the foot wear before entering the kitchen.While 81.8% of group A employees responded that diarrhoeal diseases spread by contaminated food,majority of group B(62.7% responded other reasons.81.8% of group A feel it necessary to chlorinate or filter visibly clean water, whereas only 52.7% of group B feel so. Conclusion Food handlers of any food establishment, in particular hospital kitchen should have high standard of educational background to have enough awareness regarding food borne diseases and importance ofpersonal hygiene to prevent transmission of diseases. Because of poor educational background, the food handlers in our study didn’t know the importance of use

  18. Portación y caracterización de Staphylococcus aureus en manipuladores de alimentos Carriage and characterization of Staphylococcus aureus in food handlers

    Directory of Open Access Journals (Sweden)

    Graciela B Jordá

    2012-06-01

    Full Text Available Staphylococcus aureus es una causa de intoxicaciones alimentarias por su capacidad de producir enterotoxinas. Los manipuladores de alimentos que portan S. aureus productores de enterotoxinas pueden provocar intoxicaciones alimentarias. Se estudiaron muestras tomadas de fosas nasales de 88 manipuladores de alimentos en la provincia de Misiones. El 37,5 % de los individuos analizados eran portadores de S. aureus. Mediante técnicas de amplificación (PCR, se detectaron genes que codifican la producción de enterotoxinas en 13 de los 33 aislamientos obtenidos (39,4 % y en el 14,7 % de los manipuladores. De estos aislamientos, 10 portaban el gen sea y 3 el gen sec. El estudio de sensibilidad a los antibióticos mostró un 100 % de sensibilidad a teicoplanina, gentamiclna y rifampicina; 2 aislamientos fueron resistentes a clindamicina y a eritromicina y 4 resultaron resistentes a la meticilina. Estos resultados son un alerta e indicarían la necesidad de desarrollar medidas racionales para reducir el riesgo potencial de intoxicaciones alimentarias.Staphylococcus aureus causes food poisoning due to its ability to produce enterotoxins. Food handlers carrying enterotoxin-producing S. aureus can contaminate food, thus leading to food poisoning. Samples were obtained from 88 food handlers in the Province of Misiones, Argentina. S. aureus was isolated from nasal swaps and PCR amplification was performed for genes encoding staphylococcal enterotoxins. A total of 37.5 % food handlers were positive for S. aureus. Expression of enterotoxin genes was found in 13 of the 33 (39.4 % S. aureus isolates studied, accounting for 14.7 % of food handlers. Gene sea was detected in 10 isolates followed by gene sec in 3 isolates. All isolates were susceptible to teicoplanin, gentamicin and rifampicin. Four isolates were resistant to methicillin whereas 2 isolates were resistant to clindamycin and erythromycin. These results constitute a critical alert and indicate the need

  19. Insensitive Munitions (Les Munitions a Risque Attenue)

    Science.gov (United States)

    1992-07-01

    82176talonnage des tests d’IAD, qui ont U6 calibr~s iium~riquement et exp&imentalement k laide de jauges pi~zo-r~sistives. La figure 1 donne ces courbes d...tests siont instrumnentks avec des jauges de sitions B 2214 et B 3017, malgr6 Vaecroissement ,ýurpression "irienne. des came6ras rapides (500 1 30

  20. Evaluation of the metabolic fate of munitions material (TNT & RDX) in plant systems. Initial assessment of plant DNA mutation spectra as a biomarker

    Energy Technology Data Exchange (ETDEWEB)

    Leung, F.; Cataldo, D.A.; Fellows, R.J.; Jarrell, A.E.; Harvey, S.D.

    1995-09-01

    Munitions material can enter the environment as a result of manufacturing activities and field usage. Predictor methodologies, or biomarkers would enhance evaluation of environmental impacts. The goal of this exploratory study deoxyribonucleic acid (DNA) mutation frequency as a biomarker for munitions exposure. The approach e resolution of an effective repetitive sequence probe for the identification of characteristic mutations, and (2) the development of a testing media [a clonal cell line of carrot (Daucus carota) spension cells]. Commercially available probes demonstrated marginal resolution therefore a low-C{sub o}t library was then constructed. Three colonies from the low-C{sub o}t DNA library were screened and the DNA isolates sequenced. A suspension culture of carrot (Daucus carota) was developed. A mutation spectra experiment was initiated at a 10-mg TNT/L exposure concentration with the attempt to clone over 1500 single TNT-exposed cells. Over the following six months greater than 98% of the initially isolated cells were unable to survive and produce micro calluses. The remaining calli were too few to be statistically significant and the experiment was terminated. The biomarker concept itself remains to be disproved, but the need for large numbers of uniform clones to differentiate true mutations suggest that more direct techniques using whole tissues need to be developed.

  1. Weapons Storage Area Survey of Munitions Storage Igloos at Medina Annex, San Antonio, Texas

    Science.gov (United States)

    2013-11-13

    Attachment 2 Contaminants of Concern 1. General. Early nuclear weapons used polonium -beryllium (Po-Be) initiators to generate neutrons during the... foods . b. Compositions. Figure 2-1 is a histogram of key isotopic mixtures of uranium by mass. The composition for DU is a moderately depleted...200 199 230 210 255 286 Min = 171 6 258 193 243 199 188 196 171 212 190 210 207 223 203 211 214 237 257 Median = 209 A B C D E F G H I J K L M N O P Q

  2. Norovirus: Food Handlers

    Science.gov (United States)

    ... National Institutes of Health NoroCORE Food Virology For Food Workers Language: English (US) Español (Spanish) Recommend on ... trabajadores del sector alimentario Norovirus and Working With Food CDC Vital Signs Report Preventing Norovirus Outbreaks, Food ...

  3. Evaluation of the metabolic fate of munitions material (TNT & RDX) in plant systems and initial assessment of material interaction with plant genetic material (DNA). Initial assessment of plant DNA adducts as biomarkers

    Energy Technology Data Exchange (ETDEWEB)

    Harvey, S.D.; Clauss, T.W.; Fellows, R.J.; Cataldo, D.A.

    1995-08-01

    Genetic damage to deoxyribonucleic acid (DNA) has long been suspected of being a fundamental event leading to cancer. A variety of causal factors can result in DNA damage including photodimerization of base pairs, ionizing radiation, specific reaction of DNA with environmental pollutants, and nonspecific oxidative damage caused by the action of highly reactive oxidizing agents produced by metabolism. Because organisms depend on an unadulterated DNA template for reproduction, DNA repair mechanisms are an important defense for maintaining genomic integrity. The objective of this exploratory project was to evaluate the potential for TNT to form DNA adducts in plants. These adducts, if they exist in sufficient quantities, could be potential biomarkers of munitions exposure. The ultimate goal is to develop a simple analytical assay for the determination of blomarkers that is indicative of munitions contamination. DNA repair exists in dynamic equilibrium with DNA damage. Repair mechanisms are capable of keeping DNA damage at remarkably low concentrations provided that the repair capacity is not overwhelmed.

  4. 2009 Munitions Executive Summit

    Science.gov (United States)

    2009-02-05

    ACTIVITIES Brazil: 30 - UH-60L, Blackhawk Colombia : 15 - UH-60L, Blackhawks 360 - Assorted small arms (Numerous Cases) 214 - NVDs Chile: Avenger M109A5...187.3M ISRAEL $59.3M JAPAN $35.9M UNITED ARAB EMIRATES $27.0M IRAQ $136.8M NETHERLANDS $19.5M COLOMBIA $25.3M AFGHANISTAN $593.5M Top Ten...New Systems Fielding New Non-Developmental Capabilities Modernizing Production Ammunition Protect Force (Non-lethal Non-Ammo) VLAD TASER Shoulder

  5. 2011 Munitions Executive Summit

    Science.gov (United States)

    2011-02-04

    Industrial Base • Global Competitiveness of NTIB • OSD Efficiency and Cost Reduction Initiatives • AMC Quality of Work Environment Initiative ( QWE ...USG – Industry Partnering • Industry / GOCO QWE efforts • Procurement & Contracting Timelines • IBAT / Minimum Sustaining Rates • ICAP is the

  6. Enteroparasitos em materiais fecal e subungueal de manipuladores de alimentos, Estado do Paraná, Brasil = Enteroparasites in fecal and subungual matter from food handlers, Parana State, Brazil

    Directory of Open Access Journals (Sweden)

    Maria das Graças Marciano Hirata Takizawa

    2009-04-01

    Full Text Available Este estudo indica a presença de enteroparasitos em material fecal e subungueal de 343 manipuladores de alimentos de Cascavel, Estado do Paraná, Brasil, de ambos os gêneros e com idade entre 14 e 75 anos. O material fecal foi analisado pelos métodos de Lutz, Ritchie modificado e Ziehl-Neelsen modificado e o subungueal, pelo Ritchie. Omaterial fecal foi positivo para 131 (38,2% manipuladores. As espécies mais prevalentes foram Endolimax nana (67,9%, Entamoeba coli (35,9%, Blastocystis sp. (28,2%, Entamoeba histolytica/dispar (10,1% e Giardia duodenalis (8,4%, e E. nana foi diferente (p = 0,00 em relação às demais. A infecção por protozoários foi maior do que por helmintos (p = 0,00. Foi verificada associação entre a positividade para algum parasito e o gênero masculino e a categoria ocupacional (p ≤ 0,05. O material subungueal foi positivo em 17 indivíduos (5,0%, com encontro de E. nana (2,9%, E. coli (1,2%, G. duodenalis (0,3% e a associação de E. nana e E. coli (0,6%, não havendo convergência com o material fecal (p = 0,00. A ocorrência de enteroparasitos nos manipuladores de alimentos de Cascavel, Estado doParaná é alta, indicando condições higiênicas inadequadas e a necessidade de medidas educativas rígidas, para se evitar que agentes patogênicos para o homem sejam propagados para os alimentos pela manipulação.This study shows the presence de enteroparasites in fecal and subungual material of 343 food handlers in the city of Cascavel, Paraná State, Brazil, from both genders and ages between 14 and 75 years. Fecal samples were analyzed using Lutz, modified Ritchie and Ziehl-Neelsen techniques, and subungual material was analyzed using the Ritchie method. Fecal samples were positive in 131 (38.2% handlers. Species with highest prevalence were Endolimax nana (67.9%, Entamoeba coli (35.9%, Blastocystis sp. (28.2%, Entamoeba histolytica/dispar (10.1% and Giardia duodenalis (8.4%, with E. nana being significantly

  7. Prevalence and Genetic Characteristics of Staphylococcus aureus and Staphylococcus argenteus Isolates Harboring Panton-Valentine Leukocidin, Enterotoxins, and TSST-1 Genes from Food Handlers in Myanmar.

    Science.gov (United States)

    Aung, Meiji Soe; San, Thida; Aye, Mya Mya; Mya, San; Maw, Win Win; Zan, Khin Nyein; Htut, Wut Hmone Win; Kawaguchiya, Mitsuyo; Urushibara, Noriko; Kobayashi, Nobumichi

    2017-08-04

    Asymptomatic carriers of toxigenic Staphylococcus aureus are potential source of diseases, including food poisoning. Toxigenic potential and genetic traits of colonizing S. aureus were investigated for 563 healthy food handlers in Myanmar. Carriage of S. aureus was found in 110 individuals (19.5%), and a total of 144 S. aureus isolates were recovered from nasal cavities (110 isolates) and hands (34 isolates). Panton-Valentine leucocidin genes ( pvl ) were detected in 18 isolates (12.5%), among which 11 isolates were classified into coa -VIa, agr type III, and ST1930 (CC96) that had been also detected in pvl -positive clinical isolates in Myanmar. A pvl -positive, ST2250 nasal isolate was identified as S. argenteus , a novel coagulase-positive staphylococcus species. Toxic shock syndrome toxin-1 (TSST-1) gene was detected in five pvl -negative isolates. All of the 144 isolates harbored at least one of the 21 enterotoxin(-like) gene(s). The most prevalent enterotoxin(-like) gene was selw (98%), followed by selx (97%), sei (28%), sely (28%), sem (26%), sel (24%), and sea and sec (22% each). Considerable genetic diversity with five groups was detected for selw . The present study revealed the relatively high rate of pvl , as well as the wide distribution of enterotoxin(-like) genes among colonizing S. aureus in Myanmar.

  8. Food handlers as a link in the chain of transmission of Giardia duodenalis and other protozoa in public schools in southern Brazil.

    Science.gov (United States)

    Colli, Cristiane Maria; Bezagio, Renata Coltro; Nishi, Letícia; Ferreira, Érika Cristina; Falavigna-Guilherme, Ana Lúcia; Gomes, Mônica Lúcia

    2015-09-01

    Food handlers (FHs) may facilitate transmission and dissemination of pathogens. The importance of FHs as a link in the epidemiological chain of transmission of Giardia duodenalis and other intestinal protozoa was assessed. Fecal and subungual material from 27 FHs were analyzed using parasitological methods. G. duodenalis was identified by direct immunofluorescence and genotyped by PCR-RFLP for the bg and gdh genes, and gdh was sequenced. At least one protozoan was detected in 30% (8/27) of the FHs and G. duodenalis (19%; 5/27) was the most common species. The AII and BIV genotypes were found in 20% (1/5) and 60% (3/5) of FHs infected with G. duodenalis, respectively. FHs can be involved in the chain of transmission of G. duodenalis and other protozoa. KJ741310 - KJ741313. © The Author 2015. Published by Oxford University Press on behalf of Royal Society of Tropical Medicine and Hygiene. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  9. Industrial production of RHIC magnets

    International Nuclear Information System (INIS)

    Anerella, M.D.; Fisher, D.H.; Sheedy, E.; McGuire, T.

    1995-01-01

    ''Doing more with less'' has always been the signature of the military man and is especially true of Air Force weapons handlers. However, as the military drawdown continues, the phase takes on new meaning and becomes an unmistakable way of life for many. Unfortunately, all the resourcefulness in the world cannot overcome some obstacles, forcing a review of utility and mission effectiveness. How can we continue to reduce our resources and still meet our requirements? This paper documents the efforts under way to create a new tool for high fidelity, dexterous, heavy payload manipulation tasks. The ultimate goal of the Next Generation Munitions Handler Advanced Technology Demonstrator (ATD) is the identification and integration of the enabling technologies necessary to produce a system that reduces weapon loading times and operator workload while addressing mobility requirements

  10. MCNP6 simulation of radiographs generated from megaelectron volt X-rays for characterizing a computed tomography system

    Science.gov (United States)

    Dooraghi, Alex A.; Tringe, Joseph W.

    2018-04-01

    To evaluate conventional munition, we simulated an x-ray computed tomography (CT) system for generating radiographs from nominal x-ray energies of 6 or 9 megaelectron volts (MeV). CT simulations, informed by measured data, allow for optimization of both system design and acquisition techniques necessary to enhance image quality. MCNP6 radiographic simulation tools were used to model ideal detector responses (DR) that assume either (1) a detector response proportional to photon flux (N) or (2) a detector response proportional to energy flux (E). As scatter may become significant with MeV x-ray systems, simulations were performed with and without the inclusion of object scatter. Simulations were compared against measurements of a cylindrical munition component principally composed of HMX, tungsten and aluminum encased in carbon fiber. Simulations and measurements used a 6 MeV peak energy x-ray spectrum filtered with 3.175 mm of tantalum. A detector response proportional to energy which includes object scatter agrees to within 0.6 % of the measured line integral of the linear attenuation coefficient. Exclusion of scatter increases the difference between measurement and simulation to 5 %. A detector response proportional to photon flux agrees to within 20 % when object scatter is included in the simulation and 27 % when object scatter is excluded.

  11. Generating Units

    Data.gov (United States)

    Department of Homeland Security — Generating Units are any combination of physically connected generators, reactors, boilers, combustion turbines, and other prime movers operated together to produce...

  12. Generational diversity.

    Science.gov (United States)

    Kramer, Linda W

    2010-01-01

    Generational diversity has proven challenges for nurse leaders, and generational values may influence ideas about work and career planning. This article discusses generational gaps, influencing factors and support, and the various generational groups present in today's workplace as well as the consequences of need addressing these issues. The article ends with a discussion of possible solutions.

  13. Enteroparasitoses em manipuladores de alimentos de escolas públicas em Uberlândia (Minas Gerais, Brasil Enteroparasitoses in food handlers in public schools

    Directory of Open Access Journals (Sweden)

    Carlos Henrique A. de Rezende

    1997-12-01

    Full Text Available Procedeu-se ao controle das enteroparasitoses em manipuladores de alimentos de escolas públicas de primeiro grau de Uberlândia, Minas Gerais, a partir de estudo prospectivo baseado em inquérito parasitológico. Foram acompanhados 264 indivíduos de 57 escolas, com três coletas de fezes (C, sendo C1 em setembro de 1989, C2 em abril de 1990 e C3 em setembro de 1990. Entre os participantes 259 eram do sexo feminino e cinco do sexo masculino, com idades entre 20 e 66 anos. As 792 amostras de fezes foram conservadas em formol a 10% e analisadas pelo método de Hoffman, Pons e Janer. A ocorrência de parasitas intestinais foi de 17, 10 e 10% para C1, C2, e C3, respectivamente. Em C1 detectou-se: Giardia lamblia (8%, ancilostomídeos (6%, Ascaris lumbricoides (3%, Entamoeba histolytica, (2%, Strongyloides stercoralis, Hymenolepis nana, Taenia sp. e Trichuris trichiura (menos de 1% cada um deles. Em C2 detectou-se: ancilostomídeos (5%, G. lamblia (2%, A. lumbricoides (1%, S. stercoralis, H. nana, Taenia sp., Enterobius vermicularis (menos de 1% cada um deles. Em C3 observou-se: ancilostomídeos (5%, G. lamblia (3%, A. lumbricoides (2%, S. stercoralis e E. vermicularis (menos de 1% cada um deles. Os indivíduos infectados receberam tratamento específico após o diagnóstico em cada coleta. Recomendamos a implantação de vigilância epidemiológica através do exame parasitológico periódico, tratamento específico e treinamento sobre manejo higiênico de alimentos e higiene pessoal para todos os manipuladores de alimentos.A prospective study based on a parasitologic survey was carried out with a view toward controlling enteroparasitoses in food handlers who work in public primary schools in Uberlândia, Minas Gerais, Brazil. The study subjects were 264 individuals from 57 schools, from whom three fecal samples (C were collected: C1 in September 1989, C2 in April 1990, and C3 in September 1990. The participants were predominantly female (259 women

  14. Occurrence, genotyping, shiga toxin genes and associated risk factors of E. coli isolated from dairy farms, handlers and milk consumers.

    Science.gov (United States)

    Awadallah, M A; Ahmed, H A; Merwad, A M; Selim, M A

    2016-11-01

    The objectives of the current study were to determine the occurrence and genotypes of E. coli in dairy farms, workers and milk consumers and to evaluate risk factors associated with contamination of milk in dairy farms. Molecular characterization of shiga toxin associated genes and enterobacterial repetitive intergenic consensus-PCR (ERIC-PCR) finger printing of E. coli from different sources were also studied. Paired milk samples and rectal swabs from 125 dairy cows, rectal swabs from 82 calves and hand swabs from 45 dairy workers from five dairy farms were collected. In addition, 100 stool samples from 70 diarrheic and 30 healthy humans were collected and examined for the presence of E. coli. E. coli was isolated from milk (22.4%), dairy cattle feces (33.6%), calf feces (35.4%), dairy worker hand swabs (11.1%) and stools of milk consumers (2%, from diarrheic patients only). Only stx1 was identified in seven of 12 E. coli O125 isolated from different sources. High genetic diversity was determined (Simpson's index of diversity, D = 1) and E. coli O125 isolates were classified into 12 distinct profiles, E1-E12. The dendrogram analysis showed that two main clusters were generated. Mastitis in dairy cows was considered a risk factor associated with contamination of the produced milk with E. coli. The isolation of E. coli from rectal swabs of dairy cows and calves poses a zoonotic risk through consumption of unpasteurized contaminated dairy milk. Educational awareness should be developed to address risks related to consumption of raw milk. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. Isotope generator

    International Nuclear Information System (INIS)

    1979-01-01

    The patent describes an isotope generator incorporating the possibility of stopping elution before the elution vessel is completely full. Sterile ventilation of the whole system can then occur, including of both generator reservoir and elution vessel. A sterile, and therefore pharmaceutically acceptable, elution fluid is thus obtained and the interior of the generator is not polluted with non-sterile air. (T.P.)

  16. Instant Generation

    Science.gov (United States)

    Loveland, Elaina

    2017-01-01

    Generation Z students (born between 1995-2010) have replaced millennials on college campuses. Generation Z students are entrepreneurial, desire practical skills with their education, and are concerned about the cost of college. This article presents what need to be known about this new generation of students.

  17. Optimising generators

    Energy Technology Data Exchange (ETDEWEB)

    Guerra, E.J.; Garcia, A.O.; Graffigna, F.M.; Verdu, C.A. (IMPSA (Argentina). Generators Div.)

    1994-11-01

    A new computer tool, the ARGEN program, has been developed for dimensioning large hydroelectric generators. This results in better designs, and reduces calculation time for engineers. ARGEN performs dimensional tailoring of salient pole synchronous machines in generators, synchronous condensers, and generator-motors. The operation and uses of ARGEN are explained and its advantages are listed in this article. (UK)

  18. Robotic Subsurface Analyzer and Sample Handler for Resource Reconnaissance and Preliminary Site Assessment for ISRU Activities at the Lunar Cold Traps

    Science.gov (United States)

    Gorevan, S. P.; Wilson, J.; Bartlett, P.; Powderly, J.; Lawrence, D.; Elphic, R.; Mungas, G.; McCullough, E.; Stoker, C.; Cannon, H.

    2004-01-01

    Since the 1960s, claims have been made that water ice deposits should exist in permanently shadowed craters near both lunar poles. Recent interpretations of data from the Lunar Prospector-Neutron Spectrometer (LP- NS) confirm that significant concentrations of hydrogen exist, probably in the form of water ice, in the permanently shadowed polar cold traps. Yet, due to the large spatial resolution (45-60 Ian) of the LP-NS measurements relative to these shadowed craters (approx.5-25 km), these data offer little certainty regarding the precise location, form or distribution of these deposits. Even less is known about how such deposits of water ice might effect lunar regolith physical properties relevant to mining, excavation, water extraction and construction. These uncertainties will need to be addressed in order to validate fundamental lunar In Situ Resource Utilization (ISRU) precepts by 2011. Given the importance of the in situ utilization of water and other resources to the future of space exploration a need arises for the advanced deployment of a robotic and reconfigurable system for physical properties and resource reconnaissance. Based on a collection of high-TRL. designs, the Subsurface Analyzer and Sample Handler (SASH) addresses these needs, particularly determining the location and form of water ice and the physical properties of regolith. SASH would be capable of: (1) subsurface access via drilling, on the order of 3-10 meters into both competent targets (ice, rock) and regolith, (2) down-hole analysis through drill string embedded instrumentation and sensors (Neutron Spectrometer and Microscopic Imager), enabling water ice identification and physical properties measurements; (3) core and unconsolidated sample acquisition from rock and regolith; (4) sample handling and processing, with minimized contamination, sample containerization and delivery to a modular instrument payload. This system would be designed with three mission enabling goals, including: (1

  19. Frequency of resistance to methicillin and other antimicrobial agents among Staphylococcus aureus strains isolated from pigs and their human handlers in Trinidad

    Directory of Open Access Journals (Sweden)

    Annika Gordon

    2014-04-01

    Full Text Available Background: Methicillin-resistant Staphylococcus aureus (MRSA has emerged recently worldwide in production animals, particularly pigs and veal calves, which act as reservoirs for MRSA strains for human infection. The study determined the prevalence of MRSA and other resistant strains of S. aureus isolated from the anterior nares of pigs and human handlers on pig farms in Trinidad. Methods: Isolation of S. aureus was done by concurrently inoculating Baird-Parker agar (BPA and Chromagar MRSA (CHROM with swab samples and isolates were identified using standard methods. Suspect MRSA isolates from Chromagar and BPA were subjected to confirmatory test using Oxoid PBP2 latex agglutination test. The disc diffusion method was used to determine resistance to antimicrobial agents. Results: The frequency of isolation of MRSA was 2.1% (15 of 723 for pigs but 0.0% (0 of 72 for humans. Generally, for isolates of S. aureus from humans there was a high frequency of resistance compared with those from pigs, which had moderate resistance to the following antimicrobials: penicillin G (54.5%, 51.5%, ampicillin (59.1%, 49.5%, and streptomycin (59.1%, 37.1%, respectively. There was moderate resistance to tetracycline (36.4%, 41.2% and gentamycin (27.2%, 23.7% for human and pig S. aureus isolates, respectively, and low resistance to sulfamethoxazole-trimethoprim (4.5%, 6.2% and norfloxacin (9.1%, 12.4%, respectively. The frequency of resistance to oxacillin by the disc method was 36.4 and 34.0% from S. aureus isolates from humans and pigs, respectively. Out of a total of 78 isolates of S. aureus from both human and pig sources that were resistant to oxacillin by the disc diffusion method, only 15 (19.2% were confirmed as MRSA by the PBP'2 latex test kit. Conclusions: The detection of MRSA strains in pigs, albeit at a low frequency, coupled with a high frequency of resistance to commonly used antimicrobial agents in pig and humans could have zoonotic and therapeutic

  20. Wind Generators

    Science.gov (United States)

    1989-01-01

    When Enerpro, Inc. president, Frank J. Bourbeau, attempted to file a patent on a system for synchronizing a wind generator to the electric utility grid, he discovered Marshall Space Flight Center's Frank Nola's power factor controller. Bourbeau advanced the technology and received a NASA license and a patent for his Auto Synchronous Controller (ASC). The ASC reduces generator "inrush current," which occurs when large generators are abruptly brought on line. It controls voltage so the generator is smoothly connected to the utility grid when it reaches its synchronous speed, protecting the components from inrush current damage. Generator efficiency is also increased in light winds by applying lower than rated voltage. Wind energy is utilized to drive turbines to generate electricity for utility companies.

  1. Mindfulness handler ikke om individualisering

    DEFF Research Database (Denmark)

    Jensen, Christian Gaden

    2013-01-01

    Kommentar til indlæg i Ugebrevet A4 om, at mindfulness virker individualiserende på arbejdspladsen.......Kommentar til indlæg i Ugebrevet A4 om, at mindfulness virker individualiserende på arbejdspladsen....

  2. Hva handler menighetsutvikling egentlig om?

    Directory of Open Access Journals (Sweden)

    Lars Råmunddal

    2015-11-01

    Full Text Available This article aims to provide an academic founded answer to the question why it is imperative that con-siderations concerning church development should be grounded on a holistic ecclesiological thinking – and not only on the attempt to develop one or a selective range of church developing factors. The model (Fig. 1 serves both as a starting point for classifying four different approaches to church devel-opment thinking and practice, and as theoretical basis for a critical theological assessment of the cur-rent approaches to church development. Thus, the assessment is made in light of what Fig.1 calls the church’s double context and two dimensions, and it shows that all the four approaches captures im-portant ecclesiological and strategic issues concerning church development – but it also shows that the strength of each approach is their weakness too – namely one-sidedness. In light of a holistic ecclesio-logical thinking, each approach can be judged as reductionist, since they all restrict the congregation’s potential for development to a specific part of church life. The last part of the article argues for the importance of developing the church: a both as a Spirit-made, unique entity and a «real» human com-munity, and b as simultaneously biblically and historically rooted and culturally relevant. One main standpoint defended here is that the church’s theological dimension must never be detached from the sociological context – and vice versa. If this happens, it may have serious consequences – not only for views on the organization and management of the church, but also for the spiritual character of the church. Regarding the question of how one can conceive a congregation in the sense b above, the article argues for what might be called a normative-contextual approach. This implies that the church always must relate itself to contemporary culture – and at the same time must show resistance to ele-ments in contemporary culture which conflict with essential biblical values.

  3. Generative Semantics.

    Science.gov (United States)

    King, Margaret

    The first section of this paper deals with the attempts within the framework of transformational grammar to make semantics a systematic part of linguistic description, and outlines the characteristics of the generative semantics position. The second section takes a critical look at generative semantics in its later manifestations, and makes a case…

  4. Generative Semantics

    Science.gov (United States)

    Bagha, Karim Nazari

    2011-01-01

    Generative semantics is (or perhaps was) a research program within linguistics, initiated by the work of George Lakoff, John R. Ross, Paul Postal and later McCawley. The approach developed out of transformational generative grammar in the mid 1960s, but stood largely in opposition to work by Noam Chomsky and his students. The nature and genesis of…

  5. Sound generator

    NARCIS (Netherlands)

    Berkhoff, Arthur P.

    2008-01-01

    A sound generator, particularly a loudspeaker, configured to emit sound, comprising a rigid element (2) enclosing a plurality of air compartments (3), wherein the rigid element (2) has a back side (B) comprising apertures (4), and a front side (F) that is closed, wherein the generator is provided

  6. Sound generator

    NARCIS (Netherlands)

    Berkhoff, Arthur P.

    2010-01-01

    A sound generator, particularly a loudspeaker, configured to emit sound, comprising a rigid element (2) enclosing a plurality of air compartments (3), wherein the rigid element (2) has a back side (B) comprising apertures (4), and a front side (F) that is closed, wherein the generator is provided

  7. Pulse Generator

    Science.gov (United States)

    Greer, Lawrence (Inventor)

    2017-01-01

    An apparatus and a computer-implemented method for generating pulses synchronized to a rising edge of a tachometer signal from rotating machinery are disclosed. For example, in one embodiment, a pulse state machine may be configured to generate a plurality of pulses, and a period state machine may be configured to determine a period for each of the plurality of pulses.

  8. Sound generator

    NARCIS (Netherlands)

    Berkhoff, Arthur P.

    2007-01-01

    A sound generator, particularly a loudspeaker, configured to emit sound, comprising a rigid element (2) enclosing a plurality of air compartments (3), wherein the rigid element (2) has a back side (B) comprising apertures (4), and a front side (F) that is closed, wherein the generator is provided

  9. Steam generator

    International Nuclear Information System (INIS)

    Fenet, J.-C.

    1980-01-01

    Steam generator particularly intended for use in the coolant system of a pressurized water reactor for vaporizing a secondary liquid, generally water, by the primary cooling liquid of the reactor and comprising special arrangements for drying the steam before it leaves the generator [fr

  10. Energy generation

    CSIR Research Space (South Africa)

    Osburn, L

    2009-02-01

    Full Text Available Current perceptions conjure images of photovoltaic panels and wind turbines when green building or sustainable development is discussed. How energy is used and how it is generated are core components of both green building and sustainable...

  11. Radionuclide generators

    International Nuclear Information System (INIS)

    Lambrecht, R.M.; Wollongong Univ.; Tomiyoshi, K.; Sekine, T.

    1997-01-01

    The present status and future directions of research and development on radionuclide generator technology are reported. The recent interest to develop double-neutron capture reactions for production of in vivo generators; neutron rich nuclides for radio-immunotherapeutic pharmaceuticals: and advances with ultra-short lived generators is highlighted. Emphasis is focused on: production of the parent radionuclide; the selection and the evaluation of support materials and eluents with respect to the resultant radiochemical yield of the daughter, and the breakthrough of the radionuclide parent: and, the uses of radionuclide generators in radiopharmaceutical chemistry, biomedical and industrial applications. The 62 Zn → 62 Cu, 66 Ni → 66 Cu, 103m Rh → 103 Rh, 188 W → 188 Re and the 225 Ac → 221 Fr → 213 Bi generators are predicted to be emphasized for future development. Coverage of the 99 Mo → 99m Tc generator was excluded, as it the subject of another review. The literature search ended June, 1996. (orig.)

  12. Radionuclide generators

    International Nuclear Information System (INIS)

    Lambrecht, R.M.

    1983-01-01

    The status of radionuclide generators for chemical research and applications related to the life sciences and biomedical research are reviewed. Emphasis is placed upon convenient, efficient and rapid separation of short-lived daughter radionuclides in a chemical form suitable for use without further chemical manipulation. The focus is on the production of the parent, the radiochemistry associated with processing the parent and daughter, the selection and the characteristic separation methods, and yields. Quality control considerations are briefly noted. The scope of this review includes selected references to applications of radionuclide generators in radiopharmaceutical chemistry, and the life sciences, particularly in diagnostic and therapeutic medicine. The 99 Mo-sup(99m)Tc generator was excluded. 202 references are cited. (orig.)

  13. Enteroparasitoses em manipuladores de alimentos do município de Ribeirão Preto - SP, Brasil, 2000 Enteroparasitosis in food handlers in the city of Ribeirão Preto - SP, Brazil, 2000

    Directory of Open Access Journals (Sweden)

    Divani Maria Capuano

    2008-12-01

    carriers of enteroparasites and contaminate food, causing food borne diseases OBJECTIVE: The aim of this study was to investigate the presence of enteroparasites in food handlers in Ribeirão Preto, SP, proposing measures to ensure the sanitary quality of food. METHODS: From July to December 2000, 429 food handlers (248 women and 181 men, aged between 16 and 77 years, underwent coproparasitological analysis as a mandatory professional requirement. Fecal samples were analyzed by the Kato's and spontaneous sedimentation methods. Cryptosporidium spp oocysts were investigated in 7.0% of diarrheic fecal samples using the formalin-ether concentration technique. RESULTS: The results showed enteroparasitosis in 33.1% of food handlers, including 20.0% cases of multiple parasitic infections. A higher prevalence of infections (68.0% was detected among the individuals involved in direct food handling activities. CONCLUSIONS: Considering these results, it is necessary to provide sanitary education and training to food handlers, and to implement the method of Hazard Analysis and Critical Control Points (HACCP in all stages of the food chain so as to ensure food safety for consumers.

  14. Generation Next

    Science.gov (United States)

    Hawkins, B. Denise

    2010-01-01

    There is a shortage of accounting professors with Ph.D.s who can prepare the next generation. To help reverse the faculty deficit, the American Institute of Certified Public Accountants (CPAs) has created the new Accounting Doctoral Scholars program by pooling more than $17 million and soliciting commitments from more than 70 of the nation's…

  15. Generative Contexts

    Science.gov (United States)

    Lyles, Dan Allen

    Educational research has identified how science, technology, engineering, and mathematics (STEM) practice and education have underperforming metrics in racial and gender diversity, despite decades of intervention. These disparities are part of the construction of a culture of science that is alienating to these populations. Recent studies in a social science framework described as "Generative Justice" have suggested that the context of social and scientific practice might be modified to bring about more just and equitable relations among the disenfranchised by circulating the value they and their non-human allies create back to them in unalienated forms. What is not known are the underlying principles of social and material space that makes a system more or less generative. I employ an autoethnographic method at four sites: a high school science class; a farm committed to "Black and Brown liberation"; a summer program geared towards youth environmental mapping; and a summer workshop for Harlem middle school students. My findings suggest that by identifying instances where material affinity, participatory voice, and creative solidarity are mutually reinforcing, it is possible to create educational contexts that generate unalienated value, and circulate it back to the producers themselves. This cycle of generation may help explain how to create systems of justice that strengthen and grow themselves through successive iterations. The problem of lack of diversity in STEM may be addressed not merely by recruiting the best and the brightest from underrepresented populations, but by changing the context of STEM education to provide tools for its own systematic restructuring.

  16. Steam generators

    International Nuclear Information System (INIS)

    Hayden, R.L.J.

    1979-01-01

    Steam generators for nuclear reactors are designed so that deposition of solids on the surface of the inlet side of the tubesheet or the inlet header with the consequent danger of corrosion and eventual tube failure is obviated or substantially reduced. (U.K.)

  17. FUDS Military Munitions Response Program

    Science.gov (United States)

    2010-06-01

    supporting decision rules - Phytoremediation of Arsenic -Advanced EMI and Multi-component Sensors (4 types) -Advanced Anomaly Classifications (4 types...Culebra, PR  Frankford Arsenal , PA  Orlando Range and Chemical Yard, FL  Pinecastle Jeep Range, FL  Spring Valley, DC  Waikoloa Maneuver

  18. Survey of Munitions Response Technologies

    Science.gov (United States)

    2006-06-01

    item. EMI detectors are operated in either time domain (TD) or frequency domain (FD). A common example of a hand-held EMI sensor is the 3-1 metal ...held Digital Emerging Fisher 1266-X Metal Detector Hand-held Analog Established Foerster MINEX 2FD 4.500 Hand-held Analog Established Minelab...ferrous and nonferrous metallic objects. • Effective in detecting near-surface objects. • Can be effective in geology that challenges magnetometers

  19. Thermoelectric generator

    International Nuclear Information System (INIS)

    Purdy, D.L.

    1978-01-01

    The main components of a thermoelectric generator are housed in an evacuated cylindrical vessel. In the middle of it there is the radioactive heat source, e.g. 90 Sr or 238 Pu, enclosed by a gamma radiation shield. This one is surrounded by a heat-insulating screen from getter material or indicidual sheets of titanium. In the bottom of the screen there are arranged several thermocouples on a circle. The thermocouples themselves are contained within casings sealed gas-tight and filled with an inert gas, e.g. argon. By separating the internal space of the generator vessel from the thermocouple casings, made of e.g. n- respectively p-doped lead telluride cylinders, for both the optimal gas state may be obtained. (DG) [de

  20. Cluster generator

    Science.gov (United States)

    Donchev, Todor I [Urbana, IL; Petrov, Ivan G [Champaign, IL

    2011-05-31

    Described herein is an apparatus and a method for producing atom clusters based on a gas discharge within a hollow cathode. The hollow cathode includes one or more walls. The one or more walls define a sputtering chamber within the hollow cathode and include a material to be sputtered. A hollow anode is positioned at an end of the sputtering chamber, and atom clusters are formed when a gas discharge is generated between the hollow anode and the hollow cathode.

  1. Photon generator

    Science.gov (United States)

    Srinivasan-Rao, Triveni

    2002-01-01

    A photon generator includes an electron gun for emitting an electron beam, a laser for emitting a laser beam, and an interaction ring wherein the laser beam repetitively collides with the electron beam for emitting a high energy photon beam therefrom in the exemplary form of x-rays. The interaction ring is a closed loop, sized and configured for circulating the electron beam with a period substantially equal to the period of the laser beam pulses for effecting repetitive collisions.

  2. Event generators

    International Nuclear Information System (INIS)

    Durand, D.; Gulminelli, F.; Lopez, O.; Vient, E.

    1998-01-01

    The results concerning the heavy ion collision simulations at Fermi energies by means of phenomenological models obtained in the last two years ar presented. The event generators are essentially following the phase of elaboration of analysis methods of data obtained by INDRA or NAUTILUS 4 π multidetectors. To identify and correctly quantify a phenomenon or a physical quantity it is necessary to verify by simulation the feasibility and validity of the analysis and also to estimate the bias introduced by the experimental filter. Many studies have shown this, for instance: the determination of the collision reaction plan for flow studies, determination of kinematical characteristics of the quasi-projectiles, and the excitation energy measurement stored in the hot nuclei. To Eugene, the currently utilised generator, several improvements were added: introduction of space-time correlations between the different products emitted in the decay of excited nuclei by calculating the trajectories of the particles in the final phase of the reaction; taking into account in the decay cascade of the discrete levels of the lighter fragments; the possibility of the schematically description of the explosion of the nucleus by simultaneous emission of multi-fragments. Thus, by comparing the calculations with the data relative to heavy systems studied with the NAUTILUS assembly it was possible to extract the time scales in the nuclear fragmentation. The utilisation of these event generators was extended to the analysis of INDRA data concerning the determination of the vaporization threshold in the collisions Ar + Ni and also the research of the expansion effects in the collisions Xe + Sn at 50 MeV/u

  3. GENERATIVE LEADERSHIP

    Directory of Open Access Journals (Sweden)

    Janina León

    2010-07-01

    Full Text Available This article presents the results of a research project that studied leadership from the standpoint of the personal conceptions that influence the behavior of local government leaders, as well as those conceptions desired to generate the social transformation processes required in communities. Qualitative methodology was used. Categories of analysis were created based on Pearson’s (1992 model of psychological archetypes. A relevant finding was the limited advance shown by interviewees regarding self-knowledge and a fragmented vision between the observer and the observee, which hinders their ability to take on the challenges that current reality demands from them.

  4. Power generation

    International Nuclear Information System (INIS)

    Nunez, Anibal D.

    2001-01-01

    In the second half of twentieth century, nuclear power became an industrial reality. Now the operating 433 power plants, the 37 plants under construction, near 9000 years/reactor with only one serious accident with emission of radioactive material to the environment (Chernobyl) show the maturity of this technology. Today nuclear power contribute a 17% to the global generation and an increase of 75 % of the demand of electricity is estimated for 2020 while this demand is expected to triplicate by 2050. How this requirement can be satisfied? All the indicators seems to demonstrate that nuclear power will be the solution because of the shortage of other sources, the increase of the prices of the non renewable fuels and the scarce contribution of the renewable ones. In addition, the climatic changes produced by the greenhouse effect make even more attractive nuclear power. The situation of Argentina is analyzed and compared with other countries. The convenience of an increase of nuclear power contribution to the total national generation seems clear and the conclusion of the construction of the Atucha II nuclear power plant is recommended

  5. Assessment of Energetic Compounds, Semi-volatile Organic Compounds, and Trace Elements in Streambed Sediment and Stream Water from Streams Draining Munitions Firing Points and Impact Areas, Fort Riley, Kansas, 2007-08

    Science.gov (United States)

    Coiner, R.L.; Pope, L.M.; Mehl, H.E.

    2010-01-01

    An assessment of energetic compounds (explosive and propellant residues) and associated semi-volatile organic compounds (SVOCs) and trace elements in streambed sediment and stream water from streams draining munitions firing points and impact areas at Fort Riley, northeast Kansas, was performed during 2007-08 by the U.S. Geological Survey (USGS) in cooperation with the U.S. Army. Streambed sediment from 16 sampling sites and stream-water samples from 5 sites were collected at or near Fort Riley and analyzed for as many as 17 energetic compounds, 65 SVOCs, and 27 trace elements. None of the energetic compounds or SVOCs were detected in streambed sediment collected from sites within the Fort Riley Military Reservation. This may indicate that these compounds either are not transported from dispersal areas or that analytical methods are not sensitive enough to detect the small concentrations that may be transported. Concentrations of munitions-associated trace elements did not exceed sediment-quality guidelines recommended by the U.S. Environmental Protection Agency (USEPA) and are not indicative of contamination of streambed sediment at selected streambed sampling sites, at least in regards to movement from dispersal areas. Analytical results of stream-water samples provided little evidence of contamination by energetic compounds, SVOCs, or associated trace elements. Perchlorate was detected in 19 of 20 stream-water samples at concentrations ranging from an estimated 0.057 to an estimated 0.236 ug/L (micrograms per liter) with a median concentration of an estimated 0.114 ug/L, substantially less than the USEPA Interim Health Advisory criterion (15 ug/L), and is in the range of documented background concentrations. Because of these small concentrations and possible natural sources (precipitation and groundwater), it is likely that the occurrence of perchlorate in stream water is naturally occurring, although a definitive identification of the source of perchlorate in

  6. Plasma generator

    International Nuclear Information System (INIS)

    Omichi, Takeo; Yamanaka, Toshiyuki.

    1976-01-01

    Object: To recycle a coolant in a sealed hollow portion formed interiorly of a plasma limiter itself to thereby to cause direct contact between the coolant and the plasma limiter and increase of contact area therebetween to cool the plasma limiter. Structure: The heat resulting from plasma generated during operation and applied to the body of the plasma limiter is transmitted to the coolant, which recycles through an inlet and outlet pipe, an inlet and outlet nozzle and a hollow portion to hold the plasma limiter at a level less than a predetermined temperature. On the other hand, the heater wire is, at the time of emergency operation, energized to heat the plasma limiter, but this heat is transmitted to the limiter body to increase the temperature thereof. However, the coolant recycling the hollow portion comes into direct contact with the limiter body, and since the plasma limiter surround the hollow portion, the heat amount transmitted from the limiter body to the coolant increases to sufficiently cool the plasma limiter. (Yoshihara, H.)

  7. Electrical generator

    International Nuclear Information System (INIS)

    Purdy, D.L.

    1976-01-01

    A nuclear heart pacer having a heat-to-electricity converter including a solid-state thermoelectric unit embedded in rubber which is compressed to impress hydrostatic precompression on the unit is described. The converter and the radioactive heat source are enclosed in a container which includes the electrical circuit components for producing and controlling the pulses; the converter and components being embedded in rubber. The portions of the rubber in the converter and in the container through which heat flows between the radioactive primary source and the hot junction and between the cold junction and the wall of the container are of thermally conducting silicone rubber. The 238 Pu primary radioactive source material is encapsuled in a refractory casing of WC-222 (T-222) which in turn is encapsuled in a corrosion-resistant casing of platinum rhodium, a diffusion barrier separating the WC-222 and the Pt--Rh casings. The Pt--Rh casing is in a closed basket of tantalum. The tantalum protects the Pt--Rh from reacting with other materials during cremation of the host, if any. The casings and basket suppress the transmission of hard x rays generated by the alpha particles from the 238 Pu. The outside casing of the pacer is typically of titanium but its surface is covered by an electrically insulating coating, typically epoxy resin, except over a relatively limited area for effective electrical grounding to the body of the host. It is contemplated that the pacer will be inserted in the host with the exposed titanium engaging a non-muscular region of the body

  8. Parasitosis intestinales en vendedores ambulantes de comida en Ciudad Bolívar, estado Bolívar, Venezuela | Intestinal parasitosis in food handlers from ciudad Bolívar, Bolívar state, Venezuela

    Directory of Open Access Journals (Sweden)

    Ixora Requena

    2017-11-01

    Full Text Available A descriptive study was performed to determine the prevalence of intestinal parasites in a sample of apparently healthy individuals who sold food in streets in Los Proceres of Ciudad Bolívar, Bolívar State. Fecal samples were collected from 85 individuals, which were analyzed by means of direct examination, qualitative Kato, spontaneous sedimentation and Kinyoun staining. Each individual was filled a clinical epidemiological record and underwent anamnesis and oriented clinical examination. The assessed group comprised 50 women and 35 men with ages 14 to 57 years (mean 15.25 ± 4.21 years. From this group, 50 persons (58.82% were parasitized mainly by Blastocystis spp. (42.22%, Endolimax nana (11.11%, Entamoeba coli (6.67%, Giardia intestinalis (11.11%, Cryptosporidium spp. (11.11% and Cystoisospora belli (4.44%. There was no preference for gender or age (p > 0.05, and persons aged 20 to 25 years were the most affected group. Monoparasitism was observed in 56% (n = 28 cases and 44% (n = 22 of cases had other associated parasites, being the most frequent association between Blastocystis spp with Entamoeba coli and Endolimax nana. It is concluded that there is a high prevalence of intestinal parasitosis among street food handlers.

  9. Magnet Free Generators - 3rd Generation Wind Turbine Generators

    DEFF Research Database (Denmark)

    Jensen, Bogi Bech; Mijatovic, Nenad; Henriksen, Matthew Lee

    2013-01-01

    This paper presents an introduction to superconducting wind turbine generators, which are often referred to as 3rd generation wind turbine generators. Advantages and challenges of superconducting generators are presented with particular focus on possible weight and efficiency improvements. A comp...

  10. Trip generation characteristics of special generators

    Science.gov (United States)

    2010-03-01

    Special generators are introduced in the sequential four-step modeling procedure to represent certain types of facilities whose trip generation characteristics are not fully captured by the standard trip generation module. They are also used in the t...

  11. Self generation, small generation, and embedded generation issues

    International Nuclear Information System (INIS)

    2001-01-01

    The New Brunswick Market Design Committee for electric power restructuring has been directed to examine issues regarding cogeneration and small-scale, on-site generation and how they will fit within the framework of the bilateral contract market. The Committee will also have to deal with issues of generation embedded in a distribution system. The Committee has defined cogeneration as the simultaneous production of electricity and useful thermal energy. Self-generation has been defined as small-scale power generation by an end-user, while embedded generation has been defined as a generation facility that is located within a distribution utility but is not directly connected to the transmission system. The Committee has postponed its decision on whether embedded generation will be eligible to participate under the bilateral contract market for electricity. This report discusses general issues such as the physical support of generation, market support of generation, transition issues and policy issues. It also discusses generation support issues such as operating reserves, transmission tariff issues, and distribution tariffs. Market support issues such as transmission access for generation sales were also considered, along with market access for generation sales, and net metering for behind the meter generation. 7 refs., 1 tab

  12. Measuring Aerosols Generated Inside Armoured Vehicles Perforated by Depleted Uranium Ammunition

    International Nuclear Information System (INIS)

    Parkhurst, MaryAnn

    2003-01-01

    In response to questions raised after the Gulf War about the health significance of exposure to depleted uranium (DU), the U.S. Department of Defense initiated a study designed to provide an improved scientific basis for assessment of possible health effects of soldiers in vehicles struck by these munitions. As part of this study, a series of DU penetrators were fired at an Abrams tank and a Bradley fighting vehicle, and the aerosols generated by vehicle perforation were collected and characterized. A robust sampling system was designed to collect aerosols in this difficult environment and to monitor continuously the sampler flow rates. Interior aerosols collected were analyzed for uranium concentration and particle size distribution as a function of time. They were also analyzed for uranium oxide phases, particle morphology, and dissolution in vitro. These data will provide input for future prospective and retrospective dose and health risk assessments of inhaled or ingested DU aerosols. This paper briefly discusses the target vehicles, firing trajectories, aerosol samplers and instrumentation control systems, and the types of analyses conducted on the samples

  13. Measuring aerosols generated inside armoured vehicles perforated by depleted uranium ammunition

    International Nuclear Information System (INIS)

    Parkhurst, M.A.

    2003-01-01

    In response to questions raised after the Gulf War about the health significance of exposure to depleted uranium (DU), the US Department of Defense initiated a study designed to provide an improved scientific basis for assessment of possible health effects on soldiers in vehicles struck by these munitions. As part of this study, a series of DU penetrators were fired at an Abrams tank and a Bradley fighting vehicle, and the aerosols generated by vehicle perforation were collected and characterised. A robust sampling system was designed to collect aerosols in this difficult environment and monitor continuously the sampler flow rates. The aerosol samplers selected for these tests included filter cassettes, cascade impactors, a five-stage cyclone and a moving filter. Sampler redundancy was an integral part of the sampling system to offset losses from fragment damage. Wipe surveys and deposition trays collected removable deposited particulate matter. Interior aerosols were analysed for uranium concentration and particle size distribution as a function of time. They were also analysed for uranium oxide phases, particle morphology and dissolution in vitro. These data, currently under independent peer review, will provide input for future prospective and retrospective dose and health risk assessments of inhaled or ingested DU aerosols. This paper briefly discusses the target vehicles, firing trajectories, aerosol samplers and instrumentation control systems, and the types of analyses conducted on the samples. (author)

  14. The complex challenge of repairing the gantry steelwork on the first generation magnox storage pond at Sellafield: Legacy Waste Storage, First Generation Magnox Storage Pond - 59133

    International Nuclear Information System (INIS)

    Richardson, Ian E.

    2012-01-01

    This paper puts into context the challenges that were faced when repairing the Gantry Steelwork of the First Generation Magnox Storage Pond (FGMSP). The First Generation Magnox Fuel Storage Pond (FGMSP) provided fuel storage and de-canning capability from the early 1960's until 1986. A significant programme of work has been underway since the completion of operational activities to support the programmes strategic intent of retrieving and storing all legacy wastes, and remediating the structure of the plant to support decommissioning activities. A key enabler to the retrievals programme is the Pond Skip Handler Machine (SHM), removed from service in 2002 following the discovery of significant signs of corrosion and distress, an inevitable consequence of being located in a coastal, salt laden environment. The SHM provides sole capability to access and retrieve the inventory of over 1000 fuel skips. It is also fundamental to future operations and the deployment of de-sludging equipment to recover significant bulk sludge's from the pond floor. Failure of the SHM steelwork gantry at worst case could potentially result in the Skip Handler Machine being derailed. This has some potential to damage to the pond structure and at worst case may result in local radiological and environmental consequences. This paper will examine the challenges faced by the team as they successfully defined, planned and executed remedial work to a specific aspect of the civil structure, the SHM gantry rail system, using a purpose built refurbishment platform; the Gantry Refurbishment System. The paper will examine how an 'innovative' approach was adopted to resolve the related issues of: - Refurbishing an aged structure to meet extended future operational demands. - The application of pragmatic engineering solutions against current codes and standards including seismic performance; - Provision of safe access for the workforce to undertake the refurbishment work against significant radiological

  15. Leading Generation Y

    National Research Council Canada - National Science Library

    Newman, Jill M

    2008-01-01

    .... Whether referred to as the Millennial Generation, Generation Y or the Next Generation, the Army needs to consider the gap between Boomers, Generation X and the Soldiers that fill our junior ranks...

  16. Distributed generation induction and permanent magnet generators

    CERN Document Server

    Lai, L

    2007-01-01

    Distributed power generation is a technology that could help to enable efficient, renewable energy production both in the developed and developing world. It includes all use of small electric power generators, whether located on the utility system, at the site of a utility customer, or at an isolated site not connected to the power grid. Induction generators (IGs) are the cheapest and most commonly used technology, compatible with renewable energy resources. Permanent magnet (PM) generators have traditionally been avoided due to high fabrication costs; however, compared with IGs they are more reliable and productive. Distributed Generation thoroughly examines the principles, possibilities and limitations of creating energy with both IGs and PM generators. It takes an electrical engineering approach in the analysis and testing of these generators, and includes diagrams and extensive case study examples o better demonstrate how the integration of energy sources can be accomplished. The book also provides the ...

  17. Random pulse generator

    International Nuclear Information System (INIS)

    Guo Ya'nan; Jin Dapeng; Zhao Dixin; Liu Zhen'an; Qiao Qiao; Chinese Academy of Sciences, Beijing

    2007-01-01

    Due to the randomness of radioactive decay and nuclear reaction, the signals from detectors are random in time. But normal pulse generator generates periodical pulses. To measure the performances of nuclear electronic devices under random inputs, a random generator is necessary. Types of random pulse generator are reviewed, 2 digital random pulse generators are introduced. (authors)

  18. Third-Generation Cephalosporin-Resistant Non-Typhoidal Salmonella Isolated from Human Feces in Japan.

    Science.gov (United States)

    Saito, Satomi; Koori, Yoshio; Ohsaki, Yusuke; Osaka, Shunsuke; Oana, Kozue; Nagano, Yukiko; Arakawa, Yoshichika; Nagano, Noriyuki

    2017-05-24

    β-lactamase genes were detected and characterized from 10 non-typhoidal Salmonella (NTS) clinical isolates resistant to third-generation cephalosporins collected between 2012 and 2014 in Japan. Five strains showed cefotaxime minimum inhibitory concentration (MIC) ≥ 64 μg/ml and positive clavulanic acid inhibition results. The bla CTX-M-2 was detected in 3 strains (serotypes Stanley and Muenchen), whereas bla TEM-52 (serotype Manhattan) and bla SHV-12 (serotype Infantis) were each found in 1 strain. bla CMY-2 was detected in the remaining 5 strains (serotypes Infantis, Rissen, Newport, and Saintpaul) with cefotaxime MICs of 4-32 μg/ml and positive cloxacillin- and 3-aminophenylboronic acid- based inhibition tests. ISEcp1 was located upstream of the bla CMY-2 in 4 strains and of the bla CTX-M-2 in 1 strain. Incompatibility (Inc)A/C, IncP, and IncI1 plasmids were present in the strains harboring bla CMY-2 , which were detected predominantly in this study. Acquisition of resistance to third-generation cephalosporins by invasive NTS may limit therapeutic options for severe systemic infections and causing serious public health problems. Though such resistant clinical isolates are still rare in Salmonella species in Japan, our findings reveal the presence of cephem-resistant NTS in food handlers, thus emphasizing the necessity of more systematic nationwide investigations.

  19. Power Generation for River and Tidal Generators

    Energy Technology Data Exchange (ETDEWEB)

    Muljadi, Eduard [National Renewable Energy Lab. (NREL), Golden, CO (United States); Wright, Alan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Gevorgian, Vahan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Donegan, James [Ocean Renewable Power Company (ORPC), Portland, ME (United States); Marnagh, Cian [Ocean Renewable Power Company (ORPC), Portland, ME (United States); McEntee, Jarlath [Ocean Renewable Power Company (ORPC), Portland, ME (United States)

    2016-06-01

    Renewable energy sources are the second largest contributor to global electricity production, after fossil fuels. The integration of renewable energy continued to grow in 2014 against a backdrop of increasing global energy consumption and a dramatic decline in oil prices during the second half of the year. As renewable generation has become less expensive during recent decades, and it becomes more accepted by the global population, the focus on renewable generation has expanded from primarily wind and solar to include new types with promising future applications, such as hydropower generation, including river and tidal generation. Today, hydropower is considered one of the most important renewable energy sources. In river and tidal generation, the input resource flow is slower but also steadier than it is in wind or solar generation, yet the level of water turbulent flow may vary from one place to another. This report focuses on hydrokinetic power conversion.

  20. Magnetohydrodynamic (MHD) power generation

    International Nuclear Information System (INIS)

    Chandra, Avinash

    1980-01-01

    The concept of MHD power generation, principles of operation of the MHD generator, its design, types, MHD generator cycles, technological problems to be overcome, the current state of the art in USA and USSR are described. Progress of India's experimental 5 Mw water-gas fired open cycle MHD power generator project is reported in brief. (M.G.B.)

  1. Talkin' 'bout My Generation

    Science.gov (United States)

    Rickes, Persis C.

    2010-01-01

    The monikers are many: (1) "Generation Y"; (2) "Echo Boomers"; (3) "GenMe"; (4) the "Net Generation"; (5) "RenGen"; and (6) "Generation Next". One name that appears to be gaining currency is "Millennials," perhaps as a way to better differentiate the current generation from its…

  2. Work Values across Generations

    Science.gov (United States)

    Hansen, Jo-Ida C.; Leuty, Melanie E.

    2012-01-01

    Mainstream publication discussions of differences in generational cohorts in the workplace suggest that individuals of more recent generations, such as Generation X and Y, have different work values than do individuals of the Silent and Baby Boom generations. Although extant research suggests that age may influence work values, few of the…

  3. Minding the Generation Gap

    Science.gov (United States)

    Field, John

    2011-01-01

    Generational conflict is back. After years of relative silence, and mutual ignorance, the young and old are once more at war. With youth unemployment high on the political agenda, the fortunes of the "jobless generation" are being contrasted with those of the "golden generation" of baby boomers, but is one generation really…

  4. Gamma ray generator

    Science.gov (United States)

    Firestone, Richard B; Reijonen, Jani

    2014-05-27

    An embodiment of a gamma ray generator includes a neutron generator and a moderator. The moderator is coupled to the neutron generator. The moderator includes a neutron capture material. In operation, the neutron generator produces neutrons and the neutron capture material captures at least some of the neutrons to produces gamma rays. An application of the gamma ray generator is as a source of gamma rays for calibration of gamma ray detectors.

  5. Corporate responsibility – det handler om redelighed

    DEFF Research Database (Denmark)

    Thomsen, Steen

    2009-01-01

    Virksomhedsansvar – corporate responsibility – kan blive et fællesbegreb for selskabsledelse, bæredygtighed og corporate social responsibility, der hver især drejer sig om forskellige former for bæredygtighed – finansiel, social og miljømæssig......Virksomhedsansvar – corporate responsibility – kan blive et fællesbegreb for selskabsledelse, bæredygtighed og corporate social responsibility, der hver især drejer sig om forskellige former for bæredygtighed – finansiel, social og miljømæssig...

  6. 7 CFR 927.7 - Handler.

    Science.gov (United States)

    2010-01-01

    ... (except a common or contract carrier transporting pears owned by another person) who, as owner, agent, broker, or otherwise, ships or handles pears, or causes pears to be shipped or handled by rail, truck...

  7. 7 CFR 932.154 - Handler transfer.

    Science.gov (United States)

    2010-01-01

    ... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... to destinations outside the area except fresh market outlets. For natural condition and processed... a destination outside the area, except fresh market outlets, two copies of said form shall be...

  8. 7 CFR 989.15 - Handler.

    Science.gov (United States)

    2010-01-01

    ... of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and... who blends raisins after they have been placed in trade channels by a packer with other such raisins in trade channels; or (3) a dehydrator who, in his capacity as a dehydrator, blends raisins entirely...

  9. 7 CFR 930.159 - Handler diversion.

    Science.gov (United States)

    2010-01-01

    ... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... normal market channels. Products which are voluntarily destroyed must have deteriorated in condition to such an extent that they are not acceptable for use in normal market channels. (e) Contributions to...

  10. 7 CFR 1209.6 - First handler.

    Science.gov (United States)

    2010-01-01

    ... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... CONSUMER INFORMATION ORDER Mushroom Promotion, Research, and Consumer Information Order Definitions § 1209... producer and prepares for marketing or markets such mushrooms, or who prepares for marketing or markets...

  11. HTGR steam generator development

    International Nuclear Information System (INIS)

    Schuetzenduebel, W.G.; Hunt, P.S.; Weber, M.

    1976-01-01

    More than 40 gas-cooled reactor plants have produced in excess of 400 reactor years of operating experience which have proved a reasonably high rate of gas-cooled reactor steam generator availability. The steam generators used in these reactors include single U-tube and straight-tube steam generators as well as meander type and helically wound or involute tube steam generators. It appears that modern reactors are being equipped with helically wound steam generators of the once-through type as the end product of steam generator evolution in gas-cooled reactor plants. This paper provides a general overview of gas-cooled reactor steam generator evolution and operating experience and shows how design criteria and constraints, research and development, and experience data are factored into the design/development of modern helically wound tube steam generators for the present generation of gas-cooled reactors

  12. Cylindrical neutron generator

    Science.gov (United States)

    Leung, Ka-Ngo [Hercules, CA

    2008-04-22

    A cylindrical neutron generator is formed with a coaxial RF-driven plasma ion source and target. A deuterium (or deuterium and tritium) plasma is produced by RF excitation in a cylindrical plasma ion generator using an RF antenna. A cylindrical neutron generating target is coaxial with the ion generator, separated by plasma and extraction electrodes which contain many slots. The plasma generator emanates ions radially over 360.degree. and the cylindrical target is thus irradiated by ions over its entire circumference. The plasma generator and target may be as long as desired. The plasma generator may be in the center and the neutron target on the outside, or the plasma generator may be on the outside and the target on the inside. In a nested configuration, several concentric targets and plasma generating regions are nested to increase the neutron flux.

  13. Second harmonic generation and sum frequency generation

    International Nuclear Information System (INIS)

    Pellin, M.J.; Biwer, B.M.; Schauer, M.W.; Frye, J.M.; Gruen, D.M.

    1990-01-01

    Second harmonic generation and sum frequency generation are increasingly being used as in situ surface probes. These techniques are coherent and inherently surface sensitive by the nature of the mediums response to intense laser light. Here we will review these two techniques using aqueous corrosion as an example problem. Aqueous corrosion of technologically important materials such as Fe, Ni and Cr proceeds from a reduced metal surface with layer by layer growth of oxide films mitigated by compositional changes in the chemical makeup of the growing film. Passivation of the metal surface is achieved after growth of only a few tens of atomic layers of metal oxide. Surface Second Harmonic Generation and a related nonlinear laser technique, Sum Frequency Generation have demonstrated an ability to probe the surface composition of growing films even in the presence of aqueous solutions. 96 refs., 4 figs

  14. Refrigeration generation using expander-generator units

    Science.gov (United States)

    Klimenko, A. V.; Agababov, V. S.; Koryagin, A. V.; Baidakova, Yu. O.

    2016-05-01

    The problems of using the expander-generator unit (EGU) to generate refrigeration, along with electricity were considered. It is shown that, on the level of the temperatures of refrigeration flows using the EGU, one can provide the refrigeration supply of the different consumers: ventilation and air conditioning plants and industrial refrigerators and freezers. The analysis of influence of process parameters on the cooling power of the EGU, which depends on the parameters of the gas expansion process in the expander and temperatures of cooled environment, was carried out. The schematic diagram of refrigeration generation plant based on EGU is presented. The features and advantages of EGU to generate refrigeration compared with thermotransformer of steam compressive and absorption types were shown, namely: there is no need to use the energy generated by burning fuel to operate the EGU; beneficial use of the heat delivered to gas from the flow being cooled in equipment operating on gas; energy production along with refrigeration generation, which makes it possible to create, using EGU, the trigeneration plants without using the energy power equipment. It is shown that the level of the temperatures of refrigeration flows, which can be obtained by using the EGU on existing technological decompression stations of the transported gas, allows providing the refrigeration supply of various consumers. The information that the refrigeration capacity of an expander-generator unit not only depends on the parameters of the process of expansion of gas flowing in the expander (flow rate, temperatures and pressures at the inlet and outlet) but it is also determined by the temperature needed for a consumer and the initial temperature of the flow of the refrigeration-carrier being cooled. The conclusion was made that the expander-generator units can be used to create trigeneration plants both at major power plants and at small energy.

  15. Quantum random number generator

    Science.gov (United States)

    Pooser, Raphael C.

    2016-05-10

    A quantum random number generator (QRNG) and a photon generator for a QRNG are provided. The photon generator may be operated in a spontaneous mode below a lasing threshold to emit photons. Photons emitted from the photon generator may have at least one random characteristic, which may be monitored by the QRNG to generate a random number. In one embodiment, the photon generator may include a photon emitter and an amplifier coupled to the photon emitter. The amplifier may enable the photon generator to be used in the QRNG without introducing significant bias in the random number and may enable multiplexing of multiple random numbers. The amplifier may also desensitize the photon generator to fluctuations in power supplied thereto while operating in the spontaneous mode. In one embodiment, the photon emitter and amplifier may be a tapered diode amplifier.

  16. Steam generator tube extraction

    International Nuclear Information System (INIS)

    Delorme, H.

    1985-05-01

    To enable tube examination on steam generators in service, Framatome has now developed a process for removing sections of steam generator tubes. Tube sections can be removed without being damaged for treating the tube section expanded in the tube sheet

  17. Microwatt thermoelectric generator

    International Nuclear Information System (INIS)

    Goslee, D.E.; Bustard, T.S.

    1976-01-01

    A microwatt thermoelectric generator suitable for implanting in the body is described. The generator utilizes a nuclear energy source. Provision is made for temporary electrical connection to the generator for testing purposes, and for ensuring that the heat generated by the nuclear source does not bypass the pile. Also disclosed is a getter which is resistant to shrinkage during sintering, and a foil configuration for controlling the radiation of heat from the nuclear source to the hot plate of the pile

  18. Microwatt thermoelectric generator

    International Nuclear Information System (INIS)

    Goslee, D.E.

    1976-01-01

    A microwatt thermoelectric generator suitable for implanting in the body is described. The disclosed generator utilizes a nuclear energy source. Provision is made for temporary electrical connection to the generator for testing purposes, and for ensuring that the heat generated by the nuclear source does not bypass the pile. Also disclosed is a getter which is resistant to shrinkage during sintering, and a foil configuration for controlling the radiation of heat from the nuclear source to the hot plate of the pile

  19. Uniform random number generators

    Science.gov (United States)

    Farr, W. R.

    1971-01-01

    Methods are presented for the generation of random numbers with uniform and normal distributions. Subprogram listings of Fortran generators for the Univac 1108, SDS 930, and CDC 3200 digital computers are also included. The generators are of the mixed multiplicative type, and the mathematical method employed is that of Marsaglia and Bray.

  20. Generational Pension Plan Designs

    NARCIS (Netherlands)

    Huang, Xiaohong; Mahieu, Ronald

    2010-01-01

    We propose a generational plan for the occupational pension provision in which people from the same generation are pooled in a generational fund. Each fund can set its own policies independently. This plan provides the benefits of differentiation missing in the prevailing collective plan and the

  1. Consolidated nuclear steam generator

    International Nuclear Information System (INIS)

    Jabsen, F.S.; Schluderberg, D.C.; Paulson, A.E.

    1978-01-01

    An improved system of providing power has a unique generating means for nuclear reactors with a number of steam generators in the form of replaceable modular units of the expendable type to attain the optimum in effective and efficient vaporization of fluid during the generating power. The system is most adaptable to undrground power plants and marine usage

  2. Logarithmic-function generator

    Science.gov (United States)

    Caron, P. R.

    1975-01-01

    Solid-state logarithmic-function generator is compact and provides improved accuracy. Generator includes a stable multivibrator feeding into RC circuit. Resulting exponentially decaying voltage is compared with input signal. Generator output is proportional to time required for exponential voltage to decay from preset reference level to level of input signal.

  3. Generation and Context Memory

    Science.gov (United States)

    Mulligan, Neil W.; Lozito, Jeffrey P.; Rosner, Zachary A.

    2006-01-01

    Generation enhances memory for occurrence but may not enhance other aspects of memory. The present study further delineates the negative generation effect in context memory reported in N. W. Mulligan (2004). First, the negative generation effect occurred for perceptual attributes of the target item (its color and font) but not for extratarget…

  4. Radio-isotope generator

    International Nuclear Information System (INIS)

    Benjamins, H.M.

    1983-01-01

    A device is claimed for interrupting an elution process in a radioisotope generator before an elution vial is entirely filled. The generator is simultaneously exposed to sterile air both in the direction of the generator column and of the elution vial

  5. Enteroparasitosis and their ethnographic relationship to food handlers in a tourist and economic center in Paraná, Southern Brazil Enteroparasitoses e sua relação etnográfica com manipuladores de alimentos em rota turística e econômica do estado do Paraná, Sul do Brasil

    Directory of Open Access Journals (Sweden)

    Maria das Graças Marciano Hirata Takizawa

    2009-02-01

    Full Text Available This study reports on the occurrence of enteroparasites based on data from an ethnographic study of food handlers in the city of Cascavel, Paraná, Brazil. Fecal material from 343 food handlers of both sexes, between 14 and 75 years of age, was analyzed using Lutz, modified Ritchie and Ziehl-Neelsen techniques. Ethnographic relationships were investigated by means of specific questionnaires. Positive fecal samples were found for 131 (38.2% handlers. Endolimax nana (67.9% was the predominant species, followed by Entamoeba coli (35.9%, Blastocystis hominis (28.2%, Entamoeba histolytica/dispar (10.1% and Giardia duodenalis (8.4%. Protozoan infections were more common than helminth infections (p = 0.00. The positive results for some parasites were associated with the male sex, professional category, and the performance of other activities (p Este estudo mostra a ocorrência de enteroparasitos e realiza um estudo etnográfico de manipuladores de alimentos do município de Cascavel/Paraná, Brasil. O material fecal de 343 manipuladores de alimentos de ambos os gêneros e idade entre 14 e 75 anos foi analisado pelos métodos de Lutz, Ritchie modificado e Ziehl-Neelsen modificado. A relação etnográfica foi investigada utilizando questionários específicos. O material fecal foi positivo para 131 (38,2% manipuladores. Endolimax nana (67,9% foi a espécie predominante seguida por Entamoeba coli (35,9%, Blastocystis hominis (28,2%, Entamoeba histolytica/dispar (10,1% e Giardia duodenalis (8,4%. A infecção por protozoários foi maior do que por helmintos (p = 0,00. Foi verificada associação entre a positividade para algum parasito e o gênero masculino, a categoria ocupacional e a realização de outras atividades (p < 0,05. Estes resultados permitem concluir que a ocorrência de enteroparasitos em manipuladores de alimentos é alta, indicando condições higiênicas inadequadas e que medidas educativas rígidas devem ser aplicadas, para evitar a

  6. Motor/generator

    Science.gov (United States)

    Hickam, Christopher Dale [Glasford, IL

    2008-05-13

    A motor/generator is provided for connecting between a transmission input shaft and an output shaft of a prime mover. The motor/generator may include a motor/generator housing, a stator mounted to the motor/generator housing, a rotor mounted at least partially within the motor/generator housing and rotatable about a rotor rotation axis, and a transmission-shaft coupler drivingly coupled to the rotor. The transmission-shaft coupler may include a clamp, which may include a base attached to the rotor and a plurality of adjustable jaws.

  7. Generator for radionuclide

    International Nuclear Information System (INIS)

    Weisner, P.S.; Forrest, T.R.F.

    1985-01-01

    This invention provides a radionuclide generator of the kind in which a parent radionuclide, adsorbed on a column of particulate material, generates a daughter radionuclide which is periodically removed from the column. This invention is particularly concerned with technetium generators using single collection vials. The generator comprises a column, a first reservoir for the eluent, a second reservoir to contain the volume of eluent required for a single elution, and means connecting the first reservoir to the second reservoir and the second reservoir to the column. Such a generator is particularly suitable for operation by vacuum elution

  8. Solar thermoelectric generator

    Science.gov (United States)

    Toberer, Eric S.; Baranowski, Lauryn L.; Warren, Emily L.

    2016-05-03

    Solar thermoelectric generators (STEGs) are solid state heat engines that generate electricity from concentrated sunlight. A novel detailed balance model for STEGs is provided and applied to both state-of-the-art and idealized materials. STEGs can produce electricity by using sunlight to heat one side of a thermoelectric generator. While concentrated sunlight can be used to achieve extremely high temperatures (and thus improved generator efficiency), the solar absorber also emits a significant amount of black body radiation. This emitted light is the dominant loss mechanism in these generators. In this invention, we propose a solution to this problem that eliminates virtually all of the emitted black body radiation. This enables solar thermoelectric generators to operate at higher efficiency and achieve said efficient with lower levels of optical concentration. The solution is suitable for both single and dual axis solar thermoelectric generators.

  9. Designing the next generation (fifth generation computers)

    International Nuclear Information System (INIS)

    Wallich, P.

    1983-01-01

    A description is given of the designs necessary to develop fifth generation computers. An analysis is offered of problems and developments in parallelism, VLSI, artificial intelligence, knowledge engineering and natural language processing. Software developments are outlined including logic programming, object-oriented programming and exploratory programming. Computer architecture is detailed including concurrent computer architecture

  10. Generational Accounting in Iran

    Directory of Open Access Journals (Sweden)

    Mahdi Salehi

    2013-09-01

    Full Text Available The aim of this paper is to study of the generation accounts for Iranian’s generation. We applied the method of Auerbach, Gokhale and Kotlihoff (1991 on the period 1967-2008 in Iran. Our calculation shows with compare to industrial countries, fiscal burden for Iranian’s population is very chip and that depend on fiscal system in Iran. Except the recent years the rate of tax in Iran has been very low. The generation account for the old people (40 olds is 2117 $ but the future generation (t+1 is 36985 $. The share of male and female, during the years, in this burden is similar. Fiscal burden for Iranian’s generation is low but this population should support other burden that calls inflation. Because when the government do not receive the tax income, a low generation account transfer to price general level.

  11. Distributed generation hits market

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    The pace at which vendors are developing and marketing gas turbines and reciprocating engines for small-scale applications may signal the widespread growth of distributed generation. Loosely defined to refer to applications in which power generation equipment is located close to end users who have near-term power capacity needs, distributed generation encompasses a broad range of technologies and load requirements. Disagreement is inevitable, but many industry observers associate distributed generation with applications anywhere from 25 kW to 25 MW. Ten years ago, distributed generation users only represented about 2% of the world market. Today, that figure has increased to about 4 or 5%, and probably could settle in the 20% range within a 3-to-5-year period, according to Michael Jones, San Diego, Calif.-based Solar Turbines Inc. power generation marketing manager. The US Energy Information Administration predicts about 175 GW of generation capacity will be added domestically by 2010. If 20% comes from smaller plants, distributed generation could account for about 35 GW. Even with more competition, it's highly unlikely distributed generation will totally replace current market structures and central stations. Distributed generation may be best suited for making market inroads when and where central systems need upgrading, and should prove its worth when the system can't handle peak demands. Typical applications include small reciprocating engine generators at remote customer sites or larger gas turbines to boost the grid. Additional market opportunities include standby capacity, peak shaving, power quality, cogeneration and capacity rental for immediate demand requirements. Integration of distributed generation systems--using gas-fueled engines, gas-fired combustion engines and fuel cells--can upgrade power quality for customers and reduce operating costs for electric utilities

  12. Third generation nuclear plants

    Science.gov (United States)

    Barré, Bertrand

    2012-05-01

    After the Chernobyl accident, a new generation of Light Water Reactors has been designed and is being built. Third generation nuclear plants are equipped with dedicated systems to insure that if the worst accident were to occur, i.e. total core meltdown, no matter how low the probability of such occurrence, radioactive releases in the environment would be minimal. This article describes the EPR, representative of this "Generation III" and a few of its competitors on the world market.

  13. Modular Stirling Radioisotope Generator

    Science.gov (United States)

    Schmitz, Paul C.; Mason, Lee S.; Schifer, Nicholas A.

    2016-01-01

    High-efficiency radioisotope power generators will play an important role in future NASA space exploration missions. Stirling Radioisotope Generators (SRGs) have been identified as a candidate generator technology capable of providing mission designers with an efficient, high-specific-power electrical generator. SRGs high conversion efficiency has the potential to extend the limited Pu-238 supply when compared with current Radioisotope Thermoelectric Generators (RTGs). Due to budgetary constraints, the Advanced Stirling Radioisotope Generator (ASRG) was canceled in the fall of 2013. Over the past year a joint study by NASA and the Department of Energy (DOE) called the Nuclear Power Assessment Study (NPAS) recommended that Stirling technologies continue to be explored. During the mission studies of the NPAS, spare SRGs were sometimes required to meet mission power system reliability requirements. This led to an additional mass penalty and increased isotope consumption levied on certain SRG-based missions. In an attempt to remove the spare power system, a new generator architecture is considered, which could increase the reliability of a Stirling generator and provide a more fault-tolerant power system. This new generator called the Modular Stirling Radioisotope Generator (MSRG) employs multiple parallel Stirling convertor/controller strings, all of which share the heat from the General Purpose Heat Source (GPHS) modules. For this design, generators utilizing one to eight GPHS modules were analyzed, which provided about 50 to 450 W of direct current (DC) to the spacecraft, respectively. Four Stirling convertors are arranged around each GPHS module resulting in from 4 to 32 Stirling/controller strings. The convertors are balanced either individually or in pairs, and are radiatively coupled to the GPHS modules. Heat is rejected through the housing/radiator, which is similar in construction to the ASRG. Mass and power analysis for these systems indicate that specific

  14. TFTR generator load assessment

    International Nuclear Information System (INIS)

    Heck, F.M.

    1975-10-01

    Typical experimental load demands on the TFTR generators are illustrated based on the electrical characteristics of the field coils, the coil leads, the main bus work, the various auxiliary bus work, the rectifiers, and transformers. The generator MW capacities are shown to be adequate for the proposed experimental operations with allowances made for variations in the final designs. The generator MVA capacities are shown to be adequate provided portions of the TF and EF rectifiers are freewheeled at selected times

  15. Solar fuels generator

    Science.gov (United States)

    Lewis, Nathan S.; Spurgeon, Joshua M.

    2016-10-25

    The solar fuels generator includes an ionically conductive separator between a gaseous first phase and a second phase. A photoanode uses one or more components of the first phase to generate cations during operation of the solar fuels generator. A cation conduit is positioned provides a pathway along which the cations travel from the photoanode to the separator. The separator conducts the cations. A second solid cation conduit conducts the cations from the separator to a photocathode.

  16. Microwatt thermoelectric generator

    International Nuclear Information System (INIS)

    Hittman, F.; Bustard, T.S.

    1976-01-01

    A microwatt thermoelectric generator suitable for implanting in the body is described. The generator utilizes a nuclear energy source. Provision is made for temporary electrical connection to the generator for testing purposes, and for ensuring that the heat generated by the nuclear source does not bypass the pile. Also disclosed is a getter which is resistant to shrinkage during sintering, and a foil configuration for controlling the radiation of heat from the nuclear source to the hot plate of the pile. 2 claims, 4 drawing figures

  17. Microwatt thermoelectric generator

    International Nuclear Information System (INIS)

    Barr, H.N.

    1978-01-01

    A microwatt thermoelectric generator suitable for implanting in the body is described. The disclosed generator utilizes a nuclear energy source. Provision is made for temporary electrical connection to the generator for testing purposes, and for ensuring that the heat generated by the nuclear source does not bypass the pile. Also disclosed is a getter which is resistant to shrinkage during sintering, and a foil configuration for controlling the radiation of heat from the nuclear source to the hot plate of the pile. 4 claims, 4 figures

  18. SMUG: Scientific Music Generator

    DEFF Research Database (Denmark)

    Scirea, Marco; A B Barros, Gabriella; Togelius, Julian

    2015-01-01

    Music is based on the real world. Composers use their day-to-day lives as inspiration to create rhythm and lyrics. Procedural music generators are capable of creating good quality pieces, and while some already use the world as inspiration, there is still much to be explored in this. We describe...... a system to generate lyrics and melodies from real-world data, in particular from academic papers. Through this we want to create a playful experience and establish a novel way of generating content (textual and musical) that could be applied to other domains, in particular to games. For melody generation...

  19. NEGATIVE GATE GENERATOR

    Science.gov (United States)

    Jones, C.S.; Eaton, T.E.

    1958-02-01

    This patent relates to pulse generating circuits and more particularly to rectangular pulse generators. The pulse generator of the present invention incorporates thyratrons as switching elements to discharge a first capacitor through a load resistor to initiate and provide the body of a Pulse, and subsequently dlscharge a second capacitor to impress the potential of its charge, with opposite potential polarity across the load resistor to terminate the pulse. Accurate rectangular pulses in the millimicrosecond range are produced across a low impedance by this generator.

  20. Third generation coaching

    DEFF Research Database (Denmark)

    Stelter, Reinhard

    2014-01-01

    Third generation coaching unfolds a new universe for coaching and coaching psychology in the framework of current social research, new learning theories and discourses about personal leadership. Third generation coaching views coaching in a societal perspective. Coaching has become important...... transformation. Coaching thus facilitates new reflections and perspectives, as well as empowerment and support for self-Bildung processes. Third generation coaching focuses on the coach and the coachee in their narrative collaborative partnership. Unlike first generation coaching, where the goal is to help...

  1. Gearless wind power generator

    Energy Technology Data Exchange (ETDEWEB)

    Soederlund, L.; Ridanpaeae, P.; Vihriaelae, H.; Peraelae, R. [Tampere Univ. of Technology (Finland). Lab. of Electricity and Magnetism

    1998-12-31

    During the wind power generator project a design algorithm for a gearless permanent magnet generator with an axially orientated magnetic flux was developed and a 10 kW model machine was constructed. Utilising the test results a variable wind speed system of 100 kW was designed that incorporates a permanent magnet generator, a frequency converter and a fuzzy controller. This system produces about 5-15% more energy than existing types and stresses to the blades are minimised. The type of generator designed in the project represents in general a gearless solution for slow-speed electrical drives. (orig.)

  2. EPRI steam generator programs

    International Nuclear Information System (INIS)

    Martel, L.J.; Passell, T.O.; Bryant, P.E.C.; Rentler, R.M.

    1977-01-01

    The paper describes the current overall EPRI steam generator program plan and some of the ongoing projects. Because of the recent occurrence of a corrosion phenomenon called ''denting,'' which has affected a number of operating utilities, an expanded program plan is being developed which addresses the broad and urgent needs required to achieve improved steam generator reliability. The goal of improved steam generator reliability will require advances in various technologies and also a management philosophy that encourages conscientious efforts to apply the improved technologies to the design, procurement, and operation of plant systems and components that affect the full life reliability of steam generators

  3. Advanced Technology for Pyrotechnic Mixtures and Munitions

    Science.gov (United States)

    1977-07-01

    or at ambient I ,/ BLENDING AND CASTING CURING REMOVING MOLD WAFER MANUFACTURING ? / I / SI ,/ iAUTOMATIC LOADING Figure 1. Plastic Bonded Starter Mix...material (fines) is recycled through the compacting rollers. asshwn The Chilsonator used at EA consisted only of the compaction rollers and the controls ...standardized process controls . Oversize material is pulverized and combined with the undersize material for s" ,regranulation in another batch. 2 ,Both the

  4. Implementing Classification on a Munitions Response Project

    Science.gov (United States)

    2011-12-01

    Kirgan, USAEC ● Doug Maddox, USEPA ● Doug Murray, NOSSA ● Andy Schwartz, USAEC ● Steve Sterling, CA DTSC ● Jeff Swanson, Colorado DPHE ● Jon Ussery...AFCEE ● Ken Vogler, Colorado DPHE ● Amy Walker, USACE ● Ed Walker, CA DTSC ● Vic Wiesek, ODUSD(I&E) ● Camp Butner  Marty Morgan  Raye Livermore ● Pole

  5. Insensitive Munitions -- New Explosives on the Horizon

    National Research Council Canada - National Science Library

    Gray, Nancy

    2008-01-01

    ...) for 155mm projectiles used by the U.S. Army. The main issue with TNT as a filling for modern projectiles is that the explosive behaves violently if subjected to an accidental stimulus, such as being involved in a fire...

  6. Munitions Operations AFSC 465X0

    Science.gov (United States)

    1991-03-01

    DPAL 3 3HQ AFSC/TTA 1 1HQ ATC/DPAE 3 3HQ ATC/TTOA -2 1HQ MAC/DPAT 3 3HQ MAC/TTA 1 1HQ PACAF/DPAT 3 3HQ PACAF/TTA 1 1HQ SAC/DPAT 3 3HQ SAC/TTA 1 IHQ TAC...DPATJ 3 3HQ TAC/TTA 1 1HQ USAF/LGMW 3 3 HQ USAF/DPPE IHQ USAFE/DPAT 3 3HQ USAFE/TTA 1 1NODAC I11 AF/TTA 1 13400 TCHTW/TTGX (LOWRY AFB CO) 5 3 5 53400...32 Training Emphasis (TE) and Task Difficulty ( TD ) Data ...... 32 Specialty Training Standard (STS) .... ............... .... 37

  7. Precision Munition Electro-Sciences Facility

    Data.gov (United States)

    Federal Laboratory Consortium — This facility allows the characterization of the electro-magnetic environment produced by a precision weapon in free flight. It can measure the radiofrequency (RF)...

  8. Precision-Guided Munitions Effects Representation

    Science.gov (United States)

    2017-01-03

    points Optimal aiming points constrained to Pattern B2 Figure 7: Left panel: unconstrained optimal aiming points and optimal aiming points con - strained...aimpoints p laced along 10 %% an E l l i p s e Unifromly in Poar Angle (EUPA) 11 %% In the cons t ra ined opt imizat ion , the s e t o f a impoints i s s p...Model 1A SQRT(P(k) = 0.3151885-0.012095* DEF - 0.006095*RAN+0.2659346*D0+0.0215783*CLA+0.0002081*LA+0.1779652*TFACTOR+0.0008161*IF(IM PANGណ,30,IMPANG

  9. Meshfree Modeling of Munitions Penetration in Soils

    Science.gov (United States)

    2017-04-01

    triaxial extension (Alejano, 2012) and being unable to model soil compaction at high mean stresses. The original and modified Cam- Clay models (Roscoe...g∇ , (23) where is the intrinsic permeability, is the fluid dynamic viscosity , is the fluid density, and g is the gravity...incorporate nonlinear elasticity into the constitutive model. Especially clay soils exhibit a nonlinear elastic response. While the effects of nonlinear

  10. Commanding Generation Y: How Generation X Military Leaders Can Better Utilize Generational Tendencies

    Science.gov (United States)

    2013-03-21

    generation ( Baby Boomers ). Although the profession of arms is a time-honored tradition steeped in discipline...senior leadership generational tendencies. Command; Leadership; Generation ; Baby Boomer ; Generation X; Generation Y Unclass Unclass Unclass UU 32 USMC...enable commanders to better lead Generation Y within the U.S. military. Discussion: Baby Boomers , Generation X, and Generation Y are

  11. Pulsed Corona Discharge Generated By Marx Generator

    Science.gov (United States)

    Sretenovic, G. B.; Obradovic, B. M.; Kovacevic, V. V.; Kuraica, M. M.; Puric J.

    2010-07-01

    The pulsed plasma has a significant role in new environmental protection technologies. As a part of a pulsed corona system for pollution control applications, Marx type repetitive pulse generator was constructed and tested in arrangement with wire-plate corona reactor. We performed electrical measurements, and obtained voltage and current signals, and also power and energy delivered per pulse. Ozone formation by streamer plasma in air was chosen to monitor chemical activity of the pulsed corona discharge.

  12. Wroclaw neutrino event generator

    International Nuclear Information System (INIS)

    Nowak, J A

    2006-01-01

    A neutrino event generator developed by the Wroclaw Neutrino Group is described. The physical models included in the generator are discussed and illustrated with the results of simulations. The considered processes are quasi-elastic scattering and pion production modelled by combining the Δ resonance excitation and deep inelastic scattering

  13. When Generations Collide

    Science.gov (United States)

    Fogg, Piper

    2008-01-01

    When four generations converge in the academic workplace, it can create serious culture clashes. It is happening across college campuses--in offices as diverse as admissions, student affairs, legal affairs, and technology. It is especially striking in the faculty ranks, where generational challenges have extra significance amid recruiting efforts,…

  14. Photovoltaic Bias Generator

    Science.gov (United States)

    2018-02-01

    Department of the Army position unless so designated by other authorized documents. Citation of manufacturer’s or trade names does not constitute an... Interior view of the photovoltaic bias generator showing wrapped-wire side of circuit board...3 Fig. 4 Interior view of the photovoltaic bias generator showing component side of circuit board

  15. Third Generation Coaching

    DEFF Research Database (Denmark)

    Stelter, Reinhard

    2016-01-01

    , Gruppen oder Teams neue Orientierung auf einer tieferen Sinnebene ermöglicht. Im Gegensatz zum Coaching der ersten Generation, bei dem das Erreichen bestimmter, festgeschriebener Ziele im Vordergrund steht, und im Gegensatz zum Coaching der zweiten Generation, in dem wünschenswerte zukünftige...

  16. Hospitality services generate revenue.

    Science.gov (United States)

    Bizouati, S

    1993-01-01

    An increasing number of hospitals are undertaking external revenue-generating activities to supplement their shrinking budgets. Written at the request of Leadership, this article outlines an example of a successful catering service -- a money-generating business that more Canadian hospitals could profitably consider.

  17. Aerodynamically shaped vortex generators

    DEFF Research Database (Denmark)

    Hansen, Martin Otto Laver; Velte, Clara Marika; Øye, Stig

    2016-01-01

    An aerodynamically shaped vortex generator has been proposed, manufactured and tested in a wind tunnel. The effect on the overall performance when applied on a thick airfoil is an increased lift to drag ratio compared with standard vortex generators. Copyright © 2015 John Wiley & Sons, Ltd....

  18. Understanding portable generators

    Energy Technology Data Exchange (ETDEWEB)

    Hills, A.; Hawkins, B. [Guelph Univ., ON (Canada); Clarke, S. [Ontario Ministry of Agriculture, Food and Rural Affairs, Toronto, ON (Canada)

    2000-06-01

    This factsheet is intended to help consumers select a small portable generator for emergency electrical needs. Interest in standby generators has been heightened ever since the prolonged power outage in Eastern Ontario and Southwestern Quebec during the 1998 ice storm and the concern over Y2K related outages. Farmers, in particular, have been reassessing their need for emergency electrical power supply. This document presents some of the factors that should be considered when purchasing and operating a portable generator in the 3 to 12 kW size. It provides a detailed review of power quality and describes the use of tractor-driven power-take-off generators of 15 kW and larger. Several manufacturers make portable generators in many sizes with a whole range of features. This document includes a table depicting generator Feature/Benefit analysis to help consumers understand the differences between features and benefits. A second table provides a check list for generator feature/benefits. Specific details for the operations of various generators are available from manufacturers, distributors and electrical contractors. 2 tabs., 1 fig.

  19. Generative Processes: Thick Drawing

    Science.gov (United States)

    Wallick, Karl

    2012-01-01

    This article presents techniques and theories of generative drawing as a means for developing complex content in architecture design studios. Appending the word "generative" to drawing adds specificity to the most common representation tool and clarifies that such drawings are not singularly about communication or documentation but are…

  20. Generation Y Perspectives

    Science.gov (United States)

    Skytland, Nicholas; Painting, Kristen; Barrera, Aaron; Fitzpatrick, Garret

    2008-01-01

    This viewgraph presentation reviews the perception of NASA and the importance of engaging those people born between 1977 and 2000, also known as Generation Y. It examines some of the differences in attitudes and experiences, and how it reflects on how they view NASA. It also discusses use of the internet in connecting to the people from that generation.

  1. Neutron generator control system

    International Nuclear Information System (INIS)

    Peelman, H.E.; Bridges, J.R.

    1981-01-01

    A method is described of controlling the neutron output of a neutron generator tube used in neutron well logging. The system operates by monitoring the target beam current and comparing a function of this current with a reference voltage level to develop a control signal used in a series regulator to control the replenisher current of the neutron generator tube. (U.K.)

  2. Generation IV national program

    International Nuclear Information System (INIS)

    Preville, M.; Sadhankar, R.; Brady, D.

    2007-01-01

    This paper outlines the Generation IV National Program. This program involves evolutionary and innovative design with significantly higher efficiencies (∼50% compared to present ∼30%) - sustainable, economical, safe, reliable and proliferation resistant - for future energy security. The Generation IV Forum (GIF) effectively leverages the resources of the participants to meet these goals. Ten countries signed the GIF Charter in 2001

  3. Solar Fuel Generator

    Science.gov (United States)

    Lewis, Nathan S. (Inventor); West, William C. (Inventor)

    2017-01-01

    The disclosure provides conductive membranes for water splitting and solar fuel generation. The membranes comprise an embedded semiconductive/photoactive material and an oxygen or hydrogen evolution catalyst. Also provided are chassis and cassettes containing the membranes for use in fuel generation.

  4. The Next Great Generation?

    Science.gov (United States)

    Brownstein, Andrew

    2000-01-01

    Discusses ideas from a new book, "Millennials Rising: The Next Great Generation," (by Neil Howe and William Strauss) suggesting that youth culture is on the cusp of a radical shift with the generation beginning with this year's college freshmen who are typically team oriented, optimistic, and poised for greatness on a global scale. Includes a…

  5. OMG: Open molecule generator

    NARCIS (Netherlands)

    Peironcely, J.E.; Rojas-Chertó, M.; Fichera, D.; Reijmers, T.; Coulier, L.; Faulon, J.-L.; Hankemeier, T.

    2012-01-01

    Computer Assisted Structure Elucidation has been used for decades to discover the chemical structure of unknown compounds. In this work we introduce the first open source structure generator, Open Molecule Generator (OMG), which for a given elemental composition produces all non-isomorphic chemical

  6. Experience and Its Generation

    Science.gov (United States)

    Youqing, Chen

    2006-01-01

    Experience is an activity that arouses emotions and generates meanings based on vivid sensation and profound comprehension. It is emotional, meaningful, and personal, playing a key role in the course of forming and developing one's qualities. The psychological process of experience generation consists of such links as sensing things, arousing…

  7. Experience and Its Generation

    Institute of Scientific and Technical Information of China (English)

    Chen Youqing

    2006-01-01

    Experience iS an activity that arouses emotions and generates meanings based on vivid sensation and profound compreh ension.It iS emotional,meaningful,and personal,playing a key role in the course of forming and developing one'S qualities.The psychological process of experience generation consists of such links as sensing things,arousing emotions,promoting comprehension and association,generating insights and meanings,and deepening emotional responses.Undergoing things personally by means of direct sensation,taking part in activities,and living life are the most important preconditions of experience generation.Emotional influence,situational edification,and arts edification ale extemal factors that induce experience generation.

  8. Impacts on power generation

    International Nuclear Information System (INIS)

    Myers, J.; Sidebotton, P.

    1998-01-01

    The future impact of the arrival of natural gas in the Maritime provinces on electricity generation in the region was discussed. Currently, electrical generation sources in Nova Scotia include hydro generation (9 per cent), coal generation (80 per cent), heavy fuel oil generation (8 per cent), and light oil, wood chips and purchased power (3 per cent). It is expected that with the introduction of natural gas electric utilities will take advantage of new gas combustion turbines which have high efficiency rates. An overview of Westcoast Power's operations across Canada was also presented. The Company has three projects in the Maritimes - the Courtney Bay project in New Brunswick, the Bayside Power project, the Irving Paper project - in addition to the McMahon cogeneration plant in Taylor, B.C. figs

  9. Quantum random number generator

    Science.gov (United States)

    Soubusta, Jan; Haderka, Ondrej; Hendrych, Martin

    2001-03-01

    Since reflection or transmission of a quantum particle on a beamsplitter is inherently random quantum process, a device built on this principle does not suffer from drawbacks of neither pseudo-random computer generators or classical noise sources. Nevertheless, a number of physical conditions necessary for high quality random numbers generation must be satisfied. Luckily, in quantum optics realization they can be well controlled. We present an easy random number generator based on the division of weak light pulses on a beamsplitter. The randomness of the generated bit stream is supported by passing the data through series of 15 statistical test. The device generates at a rate of 109.7 kbit/s.

  10. Procedure generation and verification

    International Nuclear Information System (INIS)

    Sheely, W.F.

    1986-01-01

    The Department of Energy has used Artificial Intelligence of ''AI'' concepts to develop two powerful new computer-based techniques to enhance safety in nuclear applications. The Procedure Generation System, and the Procedure Verification System, can be adapted to other commercial applications, such as a manufacturing plant. The Procedure Generation System can create a procedure to deal with the off-normal condition. The operator can then take correct actions on the system in minimal time. The Verification System evaluates the logic of the Procedure Generator's conclusions. This evaluation uses logic techniques totally independent of the Procedure Generator. The rapid, accurate generation and verification of corrective procedures can greatly reduce the human error, possible in a complex (stressful/high stress) situation

  11. EGG: Empirical Galaxy Generator

    Science.gov (United States)

    Schreiber, C.; Elbaz, D.; Pannella, M.; Merlin, E.; Castellano, M.; Fontana, A.; Bourne, N.; Boutsia, K.; Cullen, F.; Dunlop, J.; Ferguson, H. C.; Michałowski, M. J.; Okumura, K.; Santini, P.; Shu, X. W.; Wang, T.; White, C.

    2018-04-01

    The Empirical Galaxy Generator (EGG) generates fake galaxy catalogs and images with realistic positions, morphologies and fluxes from the far-ultraviolet to the far-infrared. The catalogs are generated by egg-gencat and stored in binary FITS tables (column oriented). Another program, egg-2skymaker, is used to convert the generated catalog into ASCII tables suitable for ingestion by SkyMaker (ascl:1010.066) to produce realistic high resolution images (e.g., Hubble-like), while egg-gennoise and egg-genmap can be used to generate the low resolution images (e.g., Herschel-like). These tools can be used to test source extraction codes, or to evaluate the reliability of any map-based science (stacking, dropout identification, etc.).

  12. TFTR Motor Generator

    International Nuclear Information System (INIS)

    Murray, J.G.; Bronner, G.; Horton, M.

    1977-01-01

    A general description is given of 475 MVA pulsed motor generators for TFTR at Princeton Plasma Physics Laboratory. Two identical generators operating in parallel are capable of supplying 950 MVA for an equivalent square pulse of 6.77 seconds and 4,500 MJ at 0.7 power factor to provide the energy for the pulsed electrical coils and heating system for TFTR. The description includes the operational features of the 15,000 HP wound rotor motors driving each generator with its starting equipment and cycloconverter for controlling speed, power factor, and regulating line voltage during load pulsing where the generator speed changes from 87.5 to 60 Hz frequency variation to provide the 4,500 MJ or energy. The special design characteristics such as fatigue stress calculations for 10 6 cycles of operation, forcing factor on exciter to provide regulation, and low generator impedance are reviewed

  13. Steam generator life management

    International Nuclear Information System (INIS)

    Tapping, R.L.; Nickerson, J.; Spekkens, P.; Maruska, C.

    1998-01-01

    Steam generators are a critical component of a nuclear power reactor, and can contribute significantly to station unavailability, as has been amply demonstrated in Pressurized Water Reactors (PWRs). CANDU steam generators are not immune to steam generator degradation, and the variety of CANDU steam generator designs and tube materials has led to some unexpected challenges. However, aggressive remedial actions, and careful proactive maintenance activities, have led to a decrease in steam generator-related station unavailability of Canadian CANDUs. AECL and the CANDU utilities have defined programs that will enable existing or new steam generators to operate effectively for 40 years. Research and development work covers corrosion and mechanical degradation of tube bundles and internals, chemistry, thermal hydraulics, fouling, inspection and cleaning, as well as provision for specially tool development for specific problem solving. A major driving force is development of CANDU-specific fitness-for-service guidelines, including appropriate inspection and monitoring technology to measure steam generator condition. Longer-range work focuses on development of intelligent on-line monitoring for the feedwater system and steam generator. New designs have reduced risk of corrosion and fouling, are more easily inspected and cleaned, and are less susceptible to mechanical damage. The Canadian CANDU utilities have developed programs for remedial actions to combat degradation of performance (Gentilly-2, Point Lepreau, Bruce A/B, Pickering A/B), and have developed strategic plans to ensure that good future operation is ensured. This report shows how recent advances in cleaning technology are integrated into a life management strategy, discusses downcomer flow measurement as a means of monitoring steam generator condition, and describes recent advances in hideout return as a life management tool. The research and development program, as well as operating experience, has identified

  14. Compact neutron generator

    Science.gov (United States)

    Leung, Ka-Ngo; Lou, Tak Pui

    2005-03-22

    A compact neutron generator has at its outer circumference a toroidal shaped plasma chamber in which a tritium (or other) plasma is generated. A RF antenna is wrapped around the plasma chamber. A plurality of tritium ion beamlets are extracted through spaced extraction apertures of a plasma electrode on the inner surface of the toroidal plasma chamber and directed inwardly toward the center of neutron generator. The beamlets pass through spaced acceleration and focusing electrodes to a neutron generating target at the center of neutron generator. The target is typically made of titanium tubing. Water is flowed through the tubing for cooling. The beam can be pulsed rapidly to achieve ultrashort neutron bursts. The target may be moved rapidly up and down so that the average power deposited on the surface of the target may be kept at a reasonable level. The neutron generator can produce fast neutrons from a T-T reaction which can be used for luggage and cargo interrogation applications. A luggage or cargo inspection system has a pulsed T-T neutron generator or source at the center, surrounded by associated gamma detectors and other components for identifying explosives or other contraband.

  15. OMG: Open Molecule Generator.

    Science.gov (United States)

    Peironcely, Julio E; Rojas-Chertó, Miguel; Fichera, Davide; Reijmers, Theo; Coulier, Leon; Faulon, Jean-Loup; Hankemeier, Thomas

    2012-09-17

    Computer Assisted Structure Elucidation has been used for decades to discover the chemical structure of unknown compounds. In this work we introduce the first open source structure generator, Open Molecule Generator (OMG), which for a given elemental composition produces all non-isomorphic chemical structures that match that elemental composition. Furthermore, this structure generator can accept as additional input one or multiple non-overlapping prescribed substructures to drastically reduce the number of possible chemical structures. Being open source allows for customization and future extension of its functionality. OMG relies on a modified version of the Canonical Augmentation Path, which grows intermediate chemical structures by adding bonds and checks that at each step only unique molecules are produced. In order to benchmark the tool, we generated chemical structures for the elemental formulas and substructures of different metabolites and compared the results with a commercially available structure generator. The results obtained, i.e. the number of molecules generated, were identical for elemental compositions having only C, O and H. For elemental compositions containing C, O, H, N, P and S, OMG produces all the chemically valid molecules while the other generator produces more, yet chemically impossible, molecules. The chemical completeness of the OMG results comes at the expense of being slower than the commercial generator. In addition to being open source, OMG clearly showed the added value of constraining the solution space by using multiple prescribed substructures as input. We expect this structure generator to be useful in many fields, but to be especially of great importance for metabolomics, where identifying unknown metabolites is still a major bottleneck.

  16. OMG: Open Molecule Generator

    Directory of Open Access Journals (Sweden)

    Peironcely Julio E

    2012-09-01

    Full Text Available Abstract Computer Assisted Structure Elucidation has been used for decades to discover the chemical structure of unknown compounds. In this work we introduce the first open source structure generator, Open Molecule Generator (OMG, which for a given elemental composition produces all non-isomorphic chemical structures that match that elemental composition. Furthermore, this structure generator can accept as additional input one or multiple non-overlapping prescribed substructures to drastically reduce the number of possible chemical structures. Being open source allows for customization and future extension of its functionality. OMG relies on a modified version of the Canonical Augmentation Path, which grows intermediate chemical structures by adding bonds and checks that at each step only unique molecules are produced. In order to benchmark the tool, we generated chemical structures for the elemental formulas and substructures of different metabolites and compared the results with a commercially available structure generator. The results obtained, i.e. the number of molecules generated, were identical for elemental compositions having only C, O and H. For elemental compositions containing C, O, H, N, P and S, OMG produces all the chemically valid molecules while the other generator produces more, yet chemically impossible, molecules. The chemical completeness of the OMG results comes at the expense of being slower than the commercial generator. In addition to being open source, OMG clearly showed the added value of constraining the solution space by using multiple prescribed substructures as input. We expect this structure generator to be useful in many fields, but to be especially of great importance for metabolomics, where identifying unknown metabolites is still a major bottleneck.

  17. Superconducting current generators

    International Nuclear Information System (INIS)

    Genevey, P.

    1970-01-01

    After a brief summary of the principle of energy storage and liberation with superconducting coils,two current generators are described that create currents in the range 600 to 1400 A, used for two storage experiments of 25 kJ and 50 kJ respectively. The two current generators are: a) a flux pump and b) a superconducting transformer. Both could be developed into more powerful units. The study shows the advantage of the transformer over the flux pump in order to create large currents. The efficiencies of the two generators are 95 per cent and 40 to 60 per cent respectively. (author) [fr

  18. Random number generation

    International Nuclear Information System (INIS)

    Coveyou, R.R.

    1974-01-01

    The subject of random number generation is currently controversial. Differing opinions on this subject seem to stem from implicit or explicit differences in philosophy; in particular, from differing ideas concerning the role of probability in the real world of physical processes, electronic computers, and Monte Carlo calculations. An attempt is made here to reconcile these views. The role of stochastic ideas in mathematical models is discussed. In illustration of these ideas, a mathematical model of the use of random number generators in Monte Carlo calculations is constructed. This model is used to set up criteria for the comparison and evaluation of random number generators. (U.S.)

  19. PULSE SYNTHESIZING GENERATOR

    Science.gov (United States)

    Kerns, Q.A.

    1963-08-01

    >An electronlc circuit for synthesizing electrical current pulses having very fast rise times includes several sinewave generators tuned to progressively higher harmonic frequencies with signal amplitudes and phases selectable according to the Fourier series of the waveform that is to be synthesized. Phase control is provided by periodically triggering the generators at precisely controlled times. The outputs of the generators are combined in a coaxial transmission line. Any frequency-dependent delays that occur in the transmission line can be readily compensated for so that the desired signal wave shape is obtained at the output of the line. (AEC)

  20. Coal-fired generation

    CERN Document Server

    Breeze, Paul

    2015-01-01

    Coal-Fired Generation is a concise, up-to-date and readable guide providing an introduction to this traditional power generation technology. It includes detailed descriptions of coal fired generation systems, demystifies the coal fired technology functions in practice as well as exploring the economic and environmental risk factors. Engineers, managers, policymakers and those involved in planning and delivering energy resources will find this reference a valuable guide, to help establish a reliable power supply address social and economic objectives. Focuses on the evolution of the traditio

  1. Graph Generator Survey

    Energy Technology Data Exchange (ETDEWEB)

    Lothian, Joshua [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Powers, Sarah S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Sullivan, Blair D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Baker, Matthew B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Schrock, Jonathan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Poole, Stephen W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2013-10-01

    The benchmarking effort within the Extreme Scale Systems Center at Oak Ridge National Laboratory seeks to provide High Performance Computing benchmarks and test suites of interest to the DoD sponsor. The work described in this report is a part of the effort focusing on graph generation. A previously developed benchmark, SystemBurn, allowed the emulation of different application behavior profiles within a single framework. To complement this effort, similar capabilities are desired for graph-centric problems. This report examines existing synthetic graph generator implementations in preparation for further study on the properties of their generated synthetic graphs.

  2. Power generation technologies

    CERN Document Server

    Breeze, Paul

    2014-01-01

    The new edition of Power Generation Technologies is a concise and readable guide that provides an introduction to the full spectrum of currently available power generation options, from traditional fossil fuels and the better established alternatives such as wind and solar power, to emerging renewables such as biomass and geothermal energy. Technology solutions such as combined heat and power and distributed generation are also explored. However, this book is more than just an account of the technologies - for each method the author explores the economic and environmental costs and risk factor

  3. Harmonic arbitrary waveform generator

    Science.gov (United States)

    Roberts, Brock Franklin

    2017-11-28

    High frequency arbitrary waveforms have applications in radar, communications, medical imaging, therapy, electronic warfare, and charged particle acceleration and control. State of the art arbitrary waveform generators are limited in the frequency they can operate by the speed of the Digital to Analog converters that directly create their arbitrary waveforms. The architecture of the Harmonic Arbitrary Waveform Generator allows the phase and amplitude of the high frequency content of waveforms to be controlled without taxing the Digital to Analog converters that control them. The Harmonic Arbitrary Waveform Generator converts a high frequency input, into a precision, adjustable, high frequency arbitrary waveform.

  4. Nanosecond neutron generator

    International Nuclear Information System (INIS)

    Lobov, S.I.; Pavlovskaya, N.G.; Pukhov, S.P.

    1991-01-01

    High-voltage nanosecond neutron generator for obtaining neutrons in D-T reaction is described. Yield of 6x10 6 neutron/pulse was generated in a sealed gas-filled diode with a target on the cathode by accelerating pulse voltage of approximately 0.5 MV and length at half-height of 0.5 ns and deuterium pressure of 6x10 -2 Torr. Ways of increasing neutron yield and possibilities of creating generators of nanosecond neutron pulses with great service life are considered

  5. PC Scene Generation

    Science.gov (United States)

    Buford, James A., Jr.; Cosby, David; Bunfield, Dennis H.; Mayhall, Anthony J.; Trimble, Darian E.

    2007-04-01

    AMRDEC has successfully tested hardware and software for Real-Time Scene Generation for IR and SAL Sensors on COTS PC based hardware and video cards. AMRDEC personnel worked with nVidia and Concurrent Computer Corporation to develop a Scene Generation system capable of frame rates of at least 120Hz while frame locked to an external source (such as a missile seeker) with no dropped frames. Latency measurements and image validation were performed using COTS and in-house developed hardware and software. Software for the Scene Generation system was developed using OpenSceneGraph.

  6. Philosophy of power generation

    International Nuclear Information System (INIS)

    Amein, H.; Joyia, Y.; Qureshi, M.N.; Asif, M.

    1995-01-01

    In view of the huge power demand in future, the capital investment requirements for the development of power projects to meet the future energy requirements are so alarming that public sector alone cannot manage to raise funds and participation of the private sector in power generation development has become imperative. This paper discusses a power generation philosophy based on preference to the exploitation of indigenous resources and participation of private sector. In order to have diversification in generation resources, due consideration has been given to the development of nuclear power and even non-conventional but promising technologies of solar, wind, biomass and geothermal etc. (author)

  7. French steam generator

    International Nuclear Information System (INIS)

    Remond, A.

    1986-01-01

    After recalling the potential damage mode of tubes of steam generator, the author recalls the safety criteria used in France. The improvements and the process of damage prejudice and reparation for tubular bundle are presented [fr

  8. Auxiliary Deep Generative Models

    DEFF Research Database (Denmark)

    Maaløe, Lars; Sønderby, Casper Kaae; Sønderby, Søren Kaae

    2016-01-01

    Deep generative models parameterized by neural networks have recently achieved state-of-the-art performance in unsupervised and semi-supervised learning. We extend deep generative models with auxiliary variables which improves the variational approximation. The auxiliary variables leave...... the generative model unchanged but make the variational distribution more expressive. Inspired by the structure of the auxiliary variable we also propose a model with two stochastic layers and skip connections. Our findings suggest that more expressive and properly specified deep generative models converge...... faster with better results. We show state-of-the-art performance within semi-supervised learning on MNIST (0.96%), SVHN (16.61%) and NORB (9.40%) datasets....

  9. Airburst-Generated Tsunamis

    Science.gov (United States)

    Berger, Marsha; Goodman, Jonathan

    2018-04-01

    This paper examines the questions of whether smaller asteroids that burst in the air over water can generate tsunamis that could pose a threat to distant locations. Such airburst-generated tsunamis are qualitatively different than the more frequently studied earthquake-generated tsunamis, and differ as well from tsunamis generated by asteroids that strike the ocean. Numerical simulations are presented using the shallow water equations in several settings, demonstrating very little tsunami threat from this scenario. A model problem with an explicit solution that demonstrates and explains the same phenomena found in the computations is analyzed. We discuss the question of whether compressibility and dispersion are important effects that should be included, and show results from a more sophisticated model problem using the linearized Euler equations that begins to addresses this.

  10. The nuclear power generation

    International Nuclear Information System (INIS)

    Serres, R.

    1999-01-01

    The French nuclear generating industry is highly competitive. The installations have an average age of fifteen years and are half way through their expected life. Nuclear power accounts for 70% of the profits of the French generating company, EDF. Nuclear generation has a minimal effect on the atmosphere and France has a level of CO 2 emissions, thought to be the main cause of the greenhouse effect, half that of Europe as a whole. The air in France is purer than in neighbouring countries, mainly because 75% of all electrical power is generated in nuclear plants and 15% in hydroelectric stations. The operations and maintenance of French nuclear power plants in the service and distribution companies out of a total of 100 000 employees in all, 90 % of whom are based in mainland France. (authors)

  11. Rhodium-103m generator

    International Nuclear Information System (INIS)

    Mamadaliev, N.; Levin, V.I.; Malinin, A.B.

    1978-01-01

    103 Pd separated from metal rhodium irradiated with deuterons has been used without a carrier for sup( 03m)Rh generator The generator of sup(103m)Rh is a column 6mm in diameter filled with an anionite in Cl - form (Dowex-2,8,200-400 mesh) with an adsorbed parent isotope of 103 Pd. As a result of its decay, a 103 Rh daughter isotope is accumulated, which can be washed out from the generator from time to time with a corresponding solution. To prepare the generator, 0.5g of the resin with an adsorbed 103 Pd is charged into the column containing 1g of the same resin. Washing out with 2N HCl yields more than 90% of sup(103m)Rh with a radionuclide purity of more than 99.99%

  12. Rechargeable radioactive isotope generator

    International Nuclear Information System (INIS)

    Thornton, A.K.; Cerone, F.E.

    1978-01-01

    The description is given of a rechargeable radioactive isotope generator having the following features: a box containing a transport shield, a shielded generator including elements for the absorption and holding of the parent isotope, an eluant tank, a first pipe causing this tank to communicate with the transport shield, a second pipe causing this transport shield to communicate with the shielded generator and a third pipe placing the shielded generator in communication with the outside of the unit. It also includes a shelf across the external front part of the unit a part of which is shielded by external components, a shielded elution flask in which the eluate is poured and a filter set at a point between the flask and the third pipe [fr

  13. Standard Firebrand Generator

    Data.gov (United States)

    Federal Laboratory Consortium — This apparatus, developed at EL, has been constructed to generate a controlled and repeatable size and mass distribution of glowing firebrands. The purpose of NIST...

  14. Generators for Miranda

    Energy Technology Data Exchange (ETDEWEB)

    Angiolini, G.; Borgna, H.; Garcia, A.; Fernandez, M.; Piriz, H.; Verdu, C. [IMPSA Hydrogenerators (Argentina)

    2000-10-01

    The three generators at the Miranda hydroelectric power plant on the Araguari river northwest of Belo Horizonte in the state of Minas Gerais began operation in 1998. All the electromechanical equipment for the project was supplied by IMPSA. The generators, which are driven by Francis turbines, are vertical shaft, three-phase, salient-pole synchronous machines with an output of 137 MVA. The generators successfully completed a series of studies and trials before commercial operation began and Companhia Energetica de Minas Gerais (CEMIG) is considering increasing the operation power to 150 MVA. The specification and design of the electrical aspects, stator winding, rotor, bearings, shaft line, generator cooling system, excitation system and monitoring systems are described. Electromagnetic requirements and acceptance testing results are given in two summary tables.

  15. Financing Distributed Generation

    Energy Technology Data Exchange (ETDEWEB)

    Walker, A.

    2001-06-29

    This paper introduces the engineer who is undertaking distributed generation projects to a wide range of financing options. Distributed generation systems (such as internal combustion engines, small gas turbines, fuel cells and photovoltaics) all require an initial investment, which is recovered over time through revenues or savings. An understanding of the cost of capital and financing structures helps the engineer develop realistic expectations and not be offended by the common requirements of financing organizations. This paper discusses several mechanisms for financing distributed generation projects: appropriations; debt (commercial bank loan); mortgage; home equity loan; limited partnership; vendor financing; general obligation bond; revenue bond; lease; Energy Savings Performance Contract; utility programs; chauffage (end-use purchase); and grants. The paper also discusses financial strategies for businesses focusing on distributed generation: venture capital; informal investors (''business angels''); bank and debt financing; and the stock market.

  16. Steam generator water lancing

    International Nuclear Information System (INIS)

    Kamler, F.; Schneider, W.

    1992-01-01

    The tubesheet and tube support plate deposits in CANDU steam generators are notable for their hardness. Also notable is the wide variety of steam generator access situations. Because of the sludge hardness and the difficulty of the access, traditional water lancing processes which directed jets from the central tube free lane or from the periphery of the bundle have proven unsuitable. This has led to the need for some very unique inter tube water lancing devices which could direct powerful water jets directly onto the deposits. This type of process was applied to the upper broached plates of the Bruce A steam generators, which had become severely blocked. It has since been applied to various other steam generator situations. This paper describes the flexlance equipment development, qualification, and performance in the various CANDU applications. 4 refs., 2 tabs., 7 figs

  17. Financing Distributed Generation

    International Nuclear Information System (INIS)

    Walker, A.

    2001-01-01

    This paper introduces the engineer who is undertaking distributed generation projects to a wide range of financing options. Distributed generation systems (such as internal combustion engines, small gas turbines, fuel cells and photovoltaics) all require an initial investment, which is recovered over time through revenues or savings. An understanding of the cost of capital and financing structures helps the engineer develop realistic expectations and not be offended by the common requirements of financing organizations. This paper discusses several mechanisms for financing distributed generation projects: appropriations; debt (commercial bank loan); mortgage; home equity loan; limited partnership; vendor financing; general obligation bond; revenue bond; lease; Energy Savings Performance Contract; utility programs; chauffage (end-use purchase); and grants. The paper also discusses financial strategies for businesses focusing on distributed generation: venture capital; informal investors (''business angels''); bank and debt financing; and the stock market

  18. Voltage regulator for generator

    Energy Technology Data Exchange (ETDEWEB)

    Naoi, K

    1989-01-17

    It is an object of this invention to provide a voltage regulator for a generator charging a battery, wherein even if the ambient temperature at the voltage regulator rises abnormally high, possible thermal breakage of the semiconductor elements constituting the voltage regulator can be avoided. A feature of this invention is that the semiconductor elements can be protected from thermal breakage, even at an abnormal ambient temperature rise at the voltage regulator for the battery charging generator, by controlling a maximum conduction ratio of a power transistor in the voltage regulator in accordance with the temperature at the voltage regulator. This is achieved through a switching device connected in series to the field coil of the generator and adapted to be controlled in accordance with an output voltage of the generator and the ambient temperature at the voltage regulator. 6 figs.

  19. Wind electric power generation

    International Nuclear Information System (INIS)

    Koch, M.K.; Wind, L.; Canter, B.; Moeller, T.

    2001-01-01

    The monthly statistics of wind electric power generation in Denmark are compiled from information given by the owners of the private wind turbines. For each wind turbine the name of the site and of the type of turbine is given, and the power generation data are given for the month in question together with the total production in 1999 and 2000. Also the data of operation start are given. On the map of Denmark the sites of the wind turbines are marked. (CLS)

  20. Wind electric power generation

    International Nuclear Information System (INIS)

    Koch, M. K.; Wind, L.; Canter, B.; Moeller, T.

    2002-01-01

    The monthly statistics of wind electric power generation in Denmark are compiled from information given by the owners of the private wind turbines. For each wind turbine the name of the site and of the type of turbine is given, and the power generation data are given for the month in question together with the total production in 2000 and 2001. Also the data of operation start are given. On the map of Denmark the sites of the wind turbines are marked. (SM)

  1. Automated lattice data generation

    Directory of Open Access Journals (Sweden)

    Ayyar Venkitesh

    2018-01-01

    Full Text Available The process of generating ensembles of gauge configurations (and measuring various observables over them can be tedious and error-prone when done “by hand”. In practice, most of this procedure can be automated with the use of a workflow manager. We discuss how this automation can be accomplished using Taxi, a minimal Python-based workflow manager built for generating lattice data. We present a case study demonstrating this technology.

  2. The Aeolian Asynchronous Generator

    Directory of Open Access Journals (Sweden)

    Ionel Dragomirescu

    2008-10-01

    Full Text Available The production of the electric energy with lower costs could be realized with the help of the aeolian electric central. In these centrals we can use the squirrel cage asynchronous generators, because these machines are the most safety in function and easy exploited. This work show the function analyzing of the asynchronous generator having on involving torque depending on the square wind speed, the air-density and on the construction of the wing spiral.

  3. Automated lattice data generation

    Science.gov (United States)

    Ayyar, Venkitesh; Hackett, Daniel C.; Jay, William I.; Neil, Ethan T.

    2018-03-01

    The process of generating ensembles of gauge configurations (and measuring various observables over them) can be tedious and error-prone when done "by hand". In practice, most of this procedure can be automated with the use of a workflow manager. We discuss how this automation can be accomplished using Taxi, a minimal Python-based workflow manager built for generating lattice data. We present a case study demonstrating this technology.

  4. Quad precision delay generator

    International Nuclear Information System (INIS)

    Krishnan, Shanti; Gopalakrishnan, K.R.; Marballi, K.R.

    1997-01-01

    A Quad Precision Delay Generator delays a digital edge by a programmed amount of time, varying from nanoseconds to microseconds. The output of this generator has an amplitude of the order of tens of volts and rise time of the order of nanoseconds. This was specifically designed and developed to meet the stringent requirements of the plasma focus experiments. Plasma focus is a laboratory device for producing and studying nuclear fusion reactions in hot deuterium plasma. 3 figs

  5. Steam generator tube failures

    International Nuclear Information System (INIS)

    MacDonald, P.E.; Shah, V.N.; Ward, L.W.; Ellison, P.G.

    1996-04-01

    A review and summary of the available information on steam generator tubing failures and the impact of these failures on plant safety is presented. The following topics are covered: pressurized water reactor (PWR), Canadian deuterium uranium (CANDU) reactor, and Russian water moderated, water cooled energy reactor (VVER) steam generator degradation, PWR steam generator tube ruptures, the thermal-hydraulic response of a PWR plant with a faulted steam generator, the risk significance of steam generator tube rupture accidents, tubing inspection requirements and fitness-for-service criteria in various countries, and defect detection reliability and sizing accuracy. A significant number of steam generator tubes are defective and are removed from service or repaired each year. This wide spread damage has been caused by many diverse degradation mechanisms, some of which are difficult to detect and predict. In addition, spontaneous tube ruptures have occurred at the rate of about one every 2 years over the last 20 years, and incipient tube ruptures (tube failures usually identified with leak detection monitors just before rupture) have been occurring at the rate of about one per year. These ruptures have caused complex plant transients which have not always been easy for the reactor operators to control. Our analysis shows that if more than 15 tubes rupture during a main steam line break, the system response could lead to core melting. Although spontaneous and induced steam generator tube ruptures are small contributors to the total core damage frequency calculated in probabilistic risk assessments, they are risk significant because the radionuclides are likely to bypass the reactor containment building. The frequency of steam generator tube ruptures can be significantly reduced through appropriate and timely inspections and repairs or removal from service

  6. Dust devil generation

    International Nuclear Information System (INIS)

    G Onishchenko, O; A Pokhotelov, O; Horton, W; Stenflo, L

    2014-01-01

    The equations describing axi-symmetric nonlinear internal gravity waves in an unstable atmosphere are derived. A hydrodynamic model of a dust devil generation mechanism in such an atmosphere is investigated. It is shown that in an unstably stratified atmosphere the convective plumes with poloidal motion can grow exponentially. Furthermore, it is demonstrated that these convective plumes in an atmosphere with weak large scale toroidal motion are unstable with respect to three-dimensional dust devil generation. (papers)

  7. Wave Generation Theory

    DEFF Research Database (Denmark)

    Frigaard, Peter; Høgedal, Michael; Christensen, Morten

    The intention of this manual is to provide some formulas and techniques which can be used for generating waves in hydraulic laboratories. Both long crested waves (2-D waves) and short crested waves (3-D waves) are considered.......The intention of this manual is to provide some formulas and techniques which can be used for generating waves in hydraulic laboratories. Both long crested waves (2-D waves) and short crested waves (3-D waves) are considered....

  8. Next generation initiation techniques

    Science.gov (United States)

    Warner, Tom; Derber, John; Zupanski, Milija; Cohn, Steve; Verlinde, Hans

    1993-01-01

    Four-dimensional data assimilation strategies can generally be classified as either current or next generation, depending upon whether they are used operationally or not. Current-generation data-assimilation techniques are those that are presently used routinely in operational-forecasting or research applications. They can be classified into the following categories: intermittent assimilation, Newtonian relaxation, and physical initialization. It should be noted that these techniques are the subject of continued research, and their improvement will parallel the development of next generation techniques described by the other speakers. Next generation assimilation techniques are those that are under development but are not yet used operationally. Most of these procedures are derived from control theory or variational methods and primarily represent continuous assimilation approaches, in which the data and model dynamics are 'fitted' to each other in an optimal way. Another 'next generation' category is the initialization of convective-scale models. Intermittent assimilation systems use an objective analysis to combine all observations within a time window that is centered on the analysis time. Continuous first-generation assimilation systems are usually based on the Newtonian-relaxation or 'nudging' techniques. Physical initialization procedures generally involve the use of standard or nonstandard data to force some physical process in the model during an assimilation period. Under the topic of next-generation assimilation techniques, variational approaches are currently being actively developed. Variational approaches seek to minimize a cost or penalty function which measures a model's fit to observations, background fields and other imposed constraints. Alternatively, the Kalman filter technique, which is also under investigation as a data assimilation procedure for numerical weather prediction, can yield acceptable initial conditions for mesoscale models. The

  9. Magnetohydrodynamic generation method

    International Nuclear Information System (INIS)

    Masai, Tadahisa; Ishibashi, Eiichi; Kojima, Akihiro.

    1967-01-01

    The present invention relates to a magneto-hydrodynamic generation method which increases the conductivity of active gas and the generated energy. In the conventional method of open-cycle magnetohydrodynamic generation, the working fluid does not possess a favorable electric conductivity since the collision cross section is large when the combustion is carried out in a condition of excess oxygen. Furthermore, combustion under a condition of oxygen shortage is uncapable of completely converting the generated energy. The air preheater or boiler is not sufficient to collect the waste gas resulting in damage and other economic disadvantages. In the present invention, the combustion gas caused by excess fuel in the combuster is supplied to the generator as the working gas, to which air or fully oxidized air is added to be reheated. While incomplete gas used for heat collection is not adequate, the unburned damage may be eliminated by combusting again and increasing the gas temperature and heat collection rate. Furthermore, a diffuser is mounted at the rear side of the generator to decrease the gas combustion rate. Thus, even when directly absorbing the preheated fully oxidized air or the ordinary air, the boiler is free from damage caused by combustion delay or impulsive force. (M. Ishida)

  10. Next generation PWR

    International Nuclear Information System (INIS)

    Tanaka, Toshihiko; Fukuda, Toshihiko; Usui, Shuji

    2001-01-01

    Development of LWR for power generation in Japan has been intended to upgrade its reliability, safety, operability, maintenance and economy as well as to increase its capacity in order, since nuclear power generation for commercial use was begun on 1970, to steadily increase its generation power. And, in Japan, ABWR (advanced BWR) of the most promising LWR in the world, was already used actually and APWR (advanced PWR) with the largest output in the world is also at a step of its actual use. And, development of the APWR in Japan was begun on 1980s, and is at a step of plan on construction of its first machine at early of this century. However, by large change of social affairs, economy of nuclear power generation is extremely required, to be positioned at an APWR improved development reactor promoted by collaboration of five PWR generation companies and the Mitsubishi Electric Co., Ltd. Therefore, on its development, investigation on effect of change in social affairs on nuclear power stations was at first carried out, to establish a design requirement for the next generation PWR. Here were described on outline, reactor core design, safety concept, and safety evaluation of APWR+ and development of an innovative PWR. (G.K.)

  11. The Gel Generator option

    International Nuclear Information System (INIS)

    Boyd, R.E.

    1999-01-01

    The development of a national policy for guaranteeing an ample supply of 99m Tc to nuclear medicine, involves issues which go beyond the means by which radioactivation is achieved. Indeed, in such an exercise the pragmatic dictates of business and the sensitivities of politics must also be taken into account. Furthermore where a preference towards the nuclear reactor or the potential of cyclotrons is being questioned, the debate is incomplete if the only options that are considered are the fission-based 99 Mo generator versus the direct cyclotron production of 99m Tc. There is a third option (also neutron γ-based), an alternative to the fission 99 Mo generator, which ought not be overlooked. The application of low specific activity (n,γ) 99 Mo to a new type of generator, the Gel Generator, has been the focus of much research, particularly in Australia and more recently in China. After the initial concept had been established in the laboratory, the Australian researchers then undertook a comprehensive program of tests on the Gel Generator to assess its potential, either in the clinical laboratory or the centralised radiopharmacy, for supplying 99m Tc suitable for nuclear medicine. The outcome of this program was a clear indication that the Gel Generator innovation had the capability to provide both technical and economic advantages to the nuclear medicine industry. These advantages are described. Since that time the Gel Generator has been selected for routine use in China where it now satisfies more than 30% of the 99m Tc demand. (author)

  12. Generation IV reactors: economics

    International Nuclear Information System (INIS)

    Dupraz, B.; Bertel, E.

    2003-01-01

    The operating nuclear reactors were built over a short period: no more than 10 years and today their average age rounds 18 years. EDF (French electricity company) plans to renew its reactor park over a far longer period : 30 years from 2020 to 2050. According to EDF this objective implies 3 constraints: 1) a service life of 50 to 60 years for a significant part of the present operating reactors, 2) to be ready to built a generation 3+ unit in 2020 which infers the third constraint: 3) to launch the construction of an EPR (European pressurized reactor) prototype as soon as possible in order to have it operating in 2010. In this scheme, generation 4 reactor will benefit the feedback experience of generation 3 and will take over in 2030. Economic analysis is an important tool that has been used by the generation 4 international forum to select the likely future reactor systems. This analysis is based on 4 independent criteria: the basic construction cost, the construction time, the operation and maintenance costs and the fuel cycle cost. This analysis leads to the evaluation of the global cost of electricity generation and of the total investment required for each of the reactor system. The former defines the economic competitiveness in a de-regulated energy market while the latter is linked to the financial risk taken by the investor. It appears, within the limits of the assumptions and models used, that generation 4 reactors will be characterized by a better competitiveness and an equivalent financial risk when compared with the previous generation. (A.C.)

  13. Fourth Generation Reactor Concepts

    International Nuclear Information System (INIS)

    Furtek, A.

    2008-01-01

    Concerns over energy resources availability, climate changes and energy supply security suggest an important role for nuclear energy in future energy supplies. So far nuclear energy evolved through three generations and is still evolving into new generation that is now being extensively studied. Nuclear Power Plants are producing 16% of the world's electricity. Today the world is moving towards hydrogen economy. Nuclear technologies can provide energy to dissociate water into oxygen and hydrogen and to production of synthetic fuel from coal gasification. The introduction of breeder reactors would turn nuclear energy from depletable energy supply into an unlimited supply. From the early beginnings of nuclear energy in the 1940s to the present, three generations of nuclear power reactors have been developed: First generation reactors: introduced during the period 1950-1970. Second generation: includes commercial power reactors built during 1970-1990 (PWR, BWR, Candu, Russian RBMK and VVER). Third generation: started being deployed in the 1990s and is composed of Advanced LWR (ALWR), Advanced BWR (ABWR) and Passive AP600 to be deployed in 2010-2030. Future advances of the nuclear technology designs can broaden opportunities for use of nuclear energy. The fourth generation reactors are expected to be deployed by 2030 in time to replace ageing reactors built in the 1970s and 1980s. The new reactors are to be designed with a view of the following objectives: economic competitiveness, enhanced safety, minimal radioactive waste production, proliferation resistance. The Generation IV International Forum (GIF) was established in January 2000 to investigate innovative nuclear energy system concepts. GIF members include Argentina, Brazil, Canada, Euratom, France Japan, South Africa, South Korea, Switzerland, United Kingdom and United States with the IAEA and OECD's NEA as permanent observers. China and Russia are expected to join the GIF initiative. The following six systems

  14. New Generator Technology

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, Roy S. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-02-17

    New generator technology project is driven by the need to be able to remotely deploy generator technology where it is needed, when it is needed. Both the military and aid programs that provide assistance after disasters could use the ability to deploy energy generation that fits the needs of the situation. Currently, pre-specified generators are deployed, sometime more than half way around the world to provide electricity. Through our Phase-I to Phase III DARPA grant, we will provide a mechanism where a 3d print station and raw materials could be shipped to a deployment site and remotely deployed personnel. These remote personnel can collaborate with engineers at a home location where 3d print plans can be optimized for the remote purpose. The plans can then be sent electronically to the remote location for printing, much like NASA sent the plans for a socket wrench to the International Space Station for printing in . If multiple generators need to be deployed at different remote locations, within miles of each other the printer rig can be moved to print the generators where they are needed. 3d printing is growing in the field of manufacturing. 3d printing has matured to the point where many types of materials are now available for many types of manufacturing. Both magnetic and electrically conductive material materials have recently been developed which can now lead to 3d printing of engines and generators. Our project will provide a successful printer rig that can be remotely deployed, to print a generator design in the field as well as provide a process for deploying the printed generator as well. This Systems Engineering Management Plan(SEMP) will provide the planning required for a Phase I DARPA grant that may also include goals for Phase II and Phase II grants. The SEMP provides a proposed project schedule, references, system engineering processes, specialty engineering system deployment and product support sections. Each section will state how our company

  15. Next-generation phylogenomics

    Directory of Open Access Journals (Sweden)

    Chan Cheong Xin

    2013-01-01

    Full Text Available Abstract Thanks to advances in next-generation technologies, genome sequences are now being generated at breadth (e.g. across environments and depth (thousands of closely related strains, individuals or samples unimaginable only a few years ago. Phylogenomics – the study of evolutionary relationships based on comparative analysis of genome-scale data – has so far been developed as industrial-scale molecular phylogenetics, proceeding in the two classical steps: multiple alignment of homologous sequences, followed by inference of a tree (or multiple trees. However, the algorithms typically employed for these steps scale poorly with number of sequences, such that for an increasing number of problems, high-quality phylogenomic analysis is (or soon will be computationally infeasible. Moreover, next-generation data are often incomplete and error-prone, and analysis may be further complicated by genome rearrangement, gene fusion and deletion, lateral genetic transfer, and transcript variation. Here we argue that next-generation data require next-generation phylogenomics, including so-called alignment-free approaches. Reviewers Reviewed by Mr Alexander Panchin (nominated by Dr Mikhail Gelfand, Dr Eugene Koonin and Prof Peter Gogarten. For the full reviews, please go to the Reviewers’ comments section.

  16. Magnetohydrodynamic power generation

    International Nuclear Information System (INIS)

    Sheindlin, A.E.; Jackson, W.D.; Brzozowski, W.S.; Rietjens, L.H.Th.

    1979-01-01

    The paper describes research and development in the field of magnetohydrodynamic power generation technology, based on discussions held in the Joint IAEA/UNESCO International Liaison Group on MHD electrical power generation. Research and development programmes on open cycle, closed cycle plasma and liquid-metal MHD are described. Open cycle MHD has now entered the engineering development stage. The paper reviews the results of cycle analyses and economic and environmental evaluations: substantial agreement has been reached on the expected overall performance and necessary component specifications. The achievement in the Soviet Union on the U-25 MHD pilot plant in obtaining full rated electrical power of 20.4 MW is described, as well as long duration testing of the integrated operation of MHD components. Work in the United States on coal-fired MHD generators has shown that, with slagging of the walls, a run time of about one hundred hours at the current density and electric field of a commercial MHD generator has been achieved. Progress obtained in closed cycle plasma and liquid metal MHD is reviewed. Electrical power densities of up to 140 MWe/m 3 and an enthalpy extraction as high as 24 per cent have been achieved in noble gas MHD generator experiments. (Auth.)

  17. MHD Generating system

    Science.gov (United States)

    Petrick, Michael; Pierson, Edward S.; Schreiner, Felix

    1980-01-01

    According to the present invention, coal combustion gas is the primary working fluid and copper or a copper alloy is the electrodynamic fluid in the MHD generator, thereby eliminating the heat exchangers between the combustor and the liquid-metal MHD working fluids, allowing the use of a conventional coalfired steam bottoming plant, and making the plant simpler, more efficient and cheaper. In operation, the gas and liquid are combined in a mixer and the resulting two-phase mixture enters the MHD generator. The MHD generator acts as a turbine and electric generator in one unit wherein the gas expands, drives the liquid across the magnetic field and thus generates electrical power. The gas and liquid are separated, and the available energy in the gas is recovered before the gas is exhausted to the atmosphere. Where the combustion gas contains sulfur, oxygen is bubbled through a side loop to remove sulfur therefrom as a concentrated stream of sulfur dioxide. The combustor is operated substoichiometrically to control the oxide level in the copper.

  18. Power generating device

    Energy Technology Data Exchange (ETDEWEB)

    Onodera, Toshihiro

    1989-05-02

    The existing power generating device consisting of static components only lacks effective measures to utilize solar energy and maintain power generation, hence it is inevitable to make the device much larger and more complicated in order to utilize it as the primary power source for artificial satellites. In view of the above, in order to offer a power generating device useful for the primary power source for satellites which is simple and can keep power generation by solar energy, this invention proposes a power generating device composed of the following elements: (1) a rectangular parallelopiped No. II superconductor plate; (2) a measure to apply a magnetic field to one face of the above superconductor plate; (3) a measure to provide a temperature difference within the range between the starting temperature and the critical temperature of superconductivity to a pair of faces meeting at right angles with the face to which the magnetic field was applied by the above measure; (4) a measure to provide an electrode on each of the other pair of faces meeting at right angles with the face to which the magnetic field was applied by the above measure and form a closed circuit by connecting the each electrode above to each of a pair of electrodes of the load respectively; and (5) a switching measure which is installed in the closed circuit prepared by the above measure and shuts off the closed circuit when the direction of the electric current running the above closed circuit is reversed. 6 figs.

  19. The Atlin Hydro Project : generation for generations

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, S. [Atlin Tlingit Development Corp., Atlin, BC (Canada)

    2010-07-01

    This presentation documented the step-by-step process by which the Atlin Hydro Project was developed. The Taku River Tlingit First Nation undertook the Atlin project as part of its vision for responsible resource management, sustainable economic development, and cultural revival. The Atlin Community Energy Plan involved an assessment of electricity demand, a 20-year demand projection, energy efficiency recommendations, and an assessment of power supply options such as wind towers, connection to the Yukon power grid, and hydro. The potential impact on fisheries, hydrology, wildlife habitat, roads and bridges, navigable waters and forests, existing rights, and First Nation archaeology were assessed, along with other factors such as hazards and flood control. A hydrology assessment of the Surprise-Pine Drainage Basin was undertaken, and stream-flow measurements were taken near the intake location on Pine Creek. The project comprises a discharge control structure and a fish ladder; an intake and weir on Pine Creek; a penstock pipeline from intake to powerhouse; a powerhouse with a 2.1 MW Pelton turbine generator and a switch yard; and a power line from the powerhouse to the interconnection with the existing grid. The impacts on fisheries, wildlife, and human movement are expected to be minimal. 28 figs., 3 tabs.

  20. Enteroparasitos em materiais fecal e subungueal de manipuladores de alimentos, Estado do Paraná, Brasil - DOI: 10.4025/actascihealthsci.v31i2.4935 Enteroparasites in fecal and subungual matter from food handlers, Parana State, Brazil- DOI: 10.4025/actascihealthsci.v31i2.4935

    Directory of Open Access Journals (Sweden)

    Dina Lúcia Moraes Falavigna

    2009-09-01

    Full Text Available Este estudo indica a presença de enteroparasitos em material fecal e subungueal de 343 manipuladores de alimentos de Cascavel, Estado do Paraná, Brasil, de ambos os gêneros e com idade entre 14 e 75 anos. O material fecal foi analisado pelos métodos de Lutz, Ritchie modificado e Ziehl-Neelsen modificado e o subungueal, pelo Ritchie. O material fecal foi positivo para 131 (38,2% manipuladores. As espécies mais prevalentes foram Endolimax nana (67,9%, Entamoeba coli (35,9%, Blastocystis sp. (28,2%, Entamoeba histolytica/díspar (10,1% e Giardia duodenalis (8,4%, e E. nana foi diferente (p = 0,00 em relação às demais. A infecção por protozoários foi maior do que por helmintos (p = 0,00. Foi verificada associação entre a positividade para algum parasito e o gênero masculino e a categoria ocupacional (p ≤ 0,05. O material subungueal foi positivo em 17 indivíduos (5,0%, com encontro de E. nana (2,9%, E. coli (1,2%, G. duodenalis (0,3% e a associação de E. nana e E. coli (0,6%, não havendo convergência com o material fecal (p = 0,00. A ocorrência de enteroparasitos nos manipuladores de alimentos de Cascavel, Estado do Paraná é alta, indicando condições higiênicas inadequadas e a necessidade de medidas educativas rígidas, para se evitar que agentes patogênicos para o homem sejam propagados para os alimentos pela manipulação.This study shows the presence de enteroparasites in fecal and subungual material of 343 food handlers in the city of Cascavel, Paraná State, Brazil, from both genders and ages between 14 and 75 years. Fecal samples were analyzed using Lutz, modified Ritchie and Ziehl-Neelsen techniques, and subungual material was analyzed using the Ritchie method. Fecal samples were positive in 131 (38.2% handlers. Species with highest prevalence were Endolimax nana (67.9%, Entamoeba coli (35.9%, Blastocystis sp. (28.2%, Entamoeba histolytica/dispar (10.1% and Giardia duodenalis (8.4%, with E. nana being significantly

  1. Third Generation Coaching

    DEFF Research Database (Denmark)

    Stelter, Reinhard

    2016-01-01

    German abstract: Auf der Grundlage aktueller Sozialforschung, neuer Lerntheorien und Diskurse der Personalführung entfaltet sich ein neues Verständnis von Coaching und Coaching-Psychologie. In der dritten Generation wird Coaching aus gesellschaftlicher Perspektive betrachtet. Wenn sich die...... Gesellschaft verändert, muss sich auch Coaching als spezifische Form der Interaktion weiterentwickeln: Die Mission des Third Generation Coaching ist die Entwicklung von Nachhaltigkeit in der Anwendung, indem sich der Dialog stärker auf Werte und Sinn-Schaffen ausrichtet, weg vom einengenden Zielfokus hin zur...... Betonung von Aspirationen, Leidenschaften und Werten. In diesem Sinne trägt Third Generation Coaching zur Entfaltung und Weiterentwicklung persönlicher Identität bei – ein entscheidender Faktor für die menschliche Entwicklung in unserer Zeit. Auf der Basis kollaborativer Zusammenarbeit dieses Ansatzes...

  2. Protocol Implementation Generator

    DEFF Research Database (Denmark)

    Carvalho Quaresma, Jose Nuno; Probst, Christian W.

    2010-01-01

    Users expect communication systems to guarantee, amongst others, privacy and integrity of their data. These can be ensured by using well-established protocols; the best protocol, however, is useless if not all parties involved in a communication have a correct implementation of the protocol and a...... Generator framework based on the LySatool and a translator from the LySa language into C or Java....... necessary tools. In this paper, we present the Protocol Implementation Generator (PiG), a framework that can be used to add protocol generation to protocol negotiation, or to easily share and implement new protocols throughout a network. PiG enables the sharing, verification, and translation...

  3. The Compton generator revisited

    Science.gov (United States)

    Siboni, S.

    2014-09-01

    The Compton generator, introduced in 1913 by the US physicist A H Compton as a relatively simple device to detect the Earth's rotation with respect to the distant stars, is analyzed and discussed in a general perspective. The paper introduces a generalized definition of the generator, emphasizing the special features of the original apparatus, and provides a suggestive interpretation of the way the device works. To this end, an intriguing electromagnetic analogy is developed, which turns out to be particularly useful in simplifying the calculations. Besides the more extensive description of the Compton generator in itself, the combined use of concepts and methods coming from different fields of physics, such as particle dynamics in moving references frames, continuum mechanics and electromagnetism, may be of interest to both teachers and graduate students.

  4. Liquid metal steam generator

    International Nuclear Information System (INIS)

    Wolowodiuk, W.

    1975-01-01

    A liquid metal heated steam generator is described which in the event of a tube failure quickly exhausts out of the steam generator the products of the reaction between the water and the liquid metal. The steam is generated in a plurality of bayonet tubes which are heated by liquid metal flowing over them between an inner cylinder and an outer cylinder. The inner cylinder extends above the level of liquid metal but below the main tube sheet. A central pipe extends down into the inner cylinder with a centrifugal separator between it and the inner cylinder at its lower end and an involute deflector plate above the separator so that the products of a reaction between the liquid metal and the water will be deflected downwardly by the deflector plate and through the separator so that the liquid metal will flow outwardly and away from the central pipe through which the steam and gaseous reaction products are exhausted. (U.S.)

  5. Grid generation methods

    CERN Document Server

    Liseikin, Vladimir D

    2010-01-01

    This book is an introduction to structured and unstructured grid methods in scientific computing, addressing graduate students, scientists as well as practitioners. Basic local and integral grid quality measures are formulated and new approaches to mesh generation are reviewed. In addition to the content of the successful first edition, a more detailed and practice oriented description of monitor metrics in Beltrami and diffusion equations is given for generating adaptive numerical grids. Also, new techniques developed by the author are presented, in particular a technique based on the inverted form of Beltrami’s partial differential equations with respect to control metrics. This technique allows the generation of adaptive grids for a wide variety of computational physics problems, including grid clustering to given function values and gradients, grid alignment with given vector fields, and combinations thereof. Applications of geometric methods to the analysis of numerical grid behavior as well as grid ge...

  6. The generation problem

    International Nuclear Information System (INIS)

    Ecker, G.

    1983-01-01

    Evidence for the generation structure of quarks and leptons is reviewed. The two main aspects of the generation problem are emphasized. The concept and possible problems of horizontal symmetries are discussed. Two different mechanisms for horizontal symmetries are considered leading to a generalized permutation symmetry in SU(2)sub(L) x u(1) in one case. The second mechanism uses the discrete unbroken subgroup of an axial U(1) with hypercolour anomalies in composite models. A concrete realization in the rishon model is investigated. The two different approaches produce almost identical quark mass matrices for three generations. In addition to a correct prediction for the Cabibbo angle the models yield a very small Kobayashi-Maskawa mixing angle Theta 3 and thus provide for a natural explanation of the smallness of CP violation. (Author)

  7. Automated drawing generation system

    International Nuclear Information System (INIS)

    Yoshinaga, Toshiaki; Kawahata, Junichi; Yoshida, Naoto; Ono, Satoru

    1991-01-01

    Since automated CAD drawing generation systems still require human intervention, improvements were focussed on an interactive processing section (data input and correcting operation) which necessitates a vast amount of work. As a result, human intervention was eliminated, the original objective of a computerized system. This is the first step taken towards complete automation. The effects of development and commercialization of the system are as described below. (1) The interactive processing time required for generating drawings was improved. It was determined that introduction of the CAD system has reduced the time required for generating drawings. (2) The difference in skills between workers preparing drawings has been eliminated and the quality of drawings has been made uniform. (3) The extent of knowledge and experience demanded of workers has been reduced. (author)

  8. Grid generation methods

    CERN Document Server

    Liseikin, Vladimir D

    2017-01-01

    This new edition provides a description of current developments relating to grid methods, grid codes, and their applications to actual problems. Grid generation methods are indispensable for the numerical solution of differential equations. Adaptive grid-mapping techniques, in particular, are the main focus and represent a promising tool to deal with systems with singularities. This 3rd edition includes three new chapters on numerical implementations (10), control of grid properties (11), and applications to mechanical, fluid, and plasma related problems (13). Also the other chapters have been updated including new topics, such as curvatures of discrete surfaces (3). Concise descriptions of hybrid mesh generation, drag and sweeping methods, parallel algorithms for mesh generation have been included too. This new edition addresses a broad range of readers: students, researchers, and practitioners in applied mathematics, mechanics, engineering, physics and other areas of applications.

  9. Generating ethnographic research questions

    DEFF Research Database (Denmark)

    Friberg, Torbjörn

    2015-01-01

    ? By drawing on the conceptual history of anthropology, the aim of this article is to generate ethnographic-oriented research questions concerned with higher education. The first part of the article provides an ethnographic background, while the second part focuses on Paul Willis's reasoning on ethnographic......As part of recent complex transformations, it seems that higher educational organisations are being forced to reorganise, standardise and streamline in order to survive in the new political and economic context. How are ethnographers in general going to approach these contemporary phenomena...... imagination, as a prerequisite for generating alternative research questions. The third part makes explicit anthropologist Maurice Godelier's theoretical imagination, carving out some specific theoretical parts which may be used in the generating process. The conclusion then suggests a number of questions...

  10. House of Generations

    DEFF Research Database (Denmark)

    Geert Jensen, Birgitte

    2017-01-01

    only the benefits of living close to the family. The Aarhus Municipality project "House of Generations" is a vision for creating a framework for relationships across all generations, for meaningful encounters and for rewarding neighbourliness. Three of Aarhus Municipality's magistrate departments...... participate in the project: Health and Care, Children and Youth, and Social Conditions and Employment. A public housing association that provides student dorms also participates in the project. The physical framework will be a building with a total area of approx. 25,000 m², located at Pier 4, at Aarhus......' harbour areas. The building will be a multi-generational house comprising a mixture of flexible public housing units for students, the elderly and residents who require care (elderly disabled people and people with acquired brain injuries). The building will be connected with common areas located in close...

  11. Spherical neutron generator

    Science.gov (United States)

    Leung, Ka-Ngo

    2006-11-21

    A spherical neutron generator is formed with a small spherical target and a spherical shell RF-driven plasma ion source surrounding the target. A deuterium (or deuterium and tritium) ion plasma is produced by RF excitation in the plasma ion source using an RF antenna. The plasma generation region is a spherical shell between an outer chamber and an inner extraction electrode. A spherical neutron generating target is at the center of the chamber and is biased negatively with respect to the extraction electrode which contains many holes. Ions passing through the holes in the extraction electrode are focused onto the target which produces neutrons by D-D or D-T reactions.

  12. Review of Micro Magnetic Generator

    OpenAIRE

    Lin DU; Gengchen SHI; Jingjing ZHAO

    2014-01-01

    This paper discusses the research progress of micro magnetic generator systems. Micro magnetic generator systems convert energy from the environment to electric energy with advantages as high reliability, high power density, long life time and can be applied to extreme environment. This paper summarizes methods for improving generator performance of micro magnetic generator, including rotational magnetic generator, vibrational magnetic generator and hybrid magnetic generator, analyzes and com...

  13. Programmable pulse generator

    International Nuclear Information System (INIS)

    Xue Zhihua; Lou Binqiao; Duan Xiaohui

    2002-01-01

    The author introduces the design of programmable pulse generator that is based on a micro-controller and controlled by RS232 interface of personal computer. The whole system has good stability. The pulse generator can produce TTL pulse and analog pulse. The pulse frequency can be selected by EPLD. The voltage amplitude and pulse width of analog pulse can be adjusted by analog switches and digitally-controlled potentiometers. The software development tools of computer is National Instruments LabView5.1. The front panel of this virtual instrumentation is intuitive and easy-to-use. Parameters can be selected and changed conveniently by knob and slide

  14. Hacking the next generation

    CERN Document Server

    Dhanjani, Nitesh; Hardin, Brett

    2009-01-01

    With the advent of rich Internet applications, the explosion of social media, and the increased use of powerful cloud computing infrastructures, a new generation of attackers has added cunning new techniques to its arsenal. For anyone involved in defending an application or a network of systems, Hacking: The Next Generation is one of the few books to identify a variety of emerging attack vectors. You'll not only find valuable information on new hacks that attempt to exploit technical flaws, you'll also learn how attackers take advantage of individuals via social networking sites, and abuse

  15. Seismic wave generator

    International Nuclear Information System (INIS)

    Devaure, Bernard.

    1982-01-01

    This invention concerns a device for simulating earth tremors. This device includes a seismic wave generator formed of a cylinder, one end of which is closed by one of the walls of a cell containing a soil, the other end being closed by a wall on which are fixed pyrotechnic devices generating shock waves inside the cylinder. These waves are transmitted from the cylinder to the cell through openings made in the cell wall. This device also includes a mechanical device acting as low-pass filter, located inside the cylinder and close to the cell wall [fr

  16. Intracavity vortex beam generation

    Science.gov (United States)

    Naidoo, Darryl; Aït-Ameur, Kamel; Forbes, Andrew

    2011-10-01

    In this paper we explore vortex beams and in particular the generation of single LG0l modes and superpositions thereof. Vortex beams carry orbital angular momentum (OAM) and this intrinsic property makes them prevalent in transferring this OAM to matter and to be used in quantum information processing. We explore an extra-cavity and intra-cavity approach in LG0l mode generation respectively. The outputs of a Porro-prism resonator are represented by "petals" and we show that through a full modal decomposition, the "petal" fields are a superposition of two LG0l modes.

  17. Electricity Generation Baseline Report

    Energy Technology Data Exchange (ETDEWEB)

    Logan, Jeffrey [National Renewable Energy Lab. (NREL), Golden, CO (United States); Marcy, Cara [National Renewable Energy Lab. (NREL), Golden, CO (United States); McCall, James [National Renewable Energy Lab. (NREL), Golden, CO (United States); Flores-Espino, Francisco [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bloom, Aaron [National Renewable Energy Lab. (NREL), Golden, CO (United States); Aabakken, Jorn [National Renewable Energy Lab. (NREL), Golden, CO (United States); Cole, Wesley [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jenkin, Thomas [National Renewable Energy Lab. (NREL), Golden, CO (United States); Porro, Gian [National Renewable Energy Lab. (NREL), Golden, CO (United States); Liu, Chang [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ganda, Francesco [Argonne National Lab. (ANL), Argonne, IL (United States); Boardman, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States); Tarka, Thomas [National Energy Technology Lab. (NETL), Albany, OR (United States); Brewer, John [National Energy Technology Lab. (NETL), Albany, OR (United States); Schultz, Travis [National Energy Technology Lab. (NETL), Albany, OR (United States)

    2017-01-01

    This report was developed by a team of national laboratory analysts over the period October 2015 to May 2016 and is part of a series of studies that provide background material to inform development of the second installment of the Quadrennial Energy Review (QER 1.2). The report focuses specifically on U.S. power sector generation. The report limits itself to the generation sector and does not address in detail parallel issues in electricity end use, transmission and distribution, markets and policy design, and other important segments. The report lists 15 key findings about energy system needs of the future.

  18. Electric power generator

    International Nuclear Information System (INIS)

    Carney, H.C.

    1977-01-01

    An electric power generator of the type employing a nuclear heat source and a thermoelectric converter is described wherein a transparent thermal insulating medium is provided inside an encapsulating enclosure to thermally insulate the heat source and thermoelectric generator. The heat source, the thermoelectric converter, and the enclosure are provided with facing surfaces which are heat-reflective to a substantial degree to inhibit radiation of heat through the medium of the encapsulating enclosure. Multiple reflective foils may be spaced within the medium as necessary to inhibit natural convection of heat and/or further inhibit radiation

  19. Wind electric power generation

    International Nuclear Information System (INIS)

    Groening, B.; Koch, M.; Canter, B.; Moeller, T.

    1995-01-01

    The monthly statistics of wind electric power generation in Denmark are compiled from information given by the owners of private wind turbines. For each wind turbine the name of the site and of the type of turbine is given, and the power generation data are given for the month in question together with the total production in 1988 and 1989. Also the data of operation start are given. On the map of Denmark the sites of the wind turbines are marked. The statistics for December 1994 comprise 2328 wind turbines

  20. Radioactive material generator

    International Nuclear Information System (INIS)

    Czaplinski, T.V.; Bolter, B.J.; Heyer, R.E.; Bruno, G.A.

    1975-01-01

    A radioactive material generator includes radioactive material in a column, which column is connected to inlet and outlet conduits, the generator being embedded in a lead casing. The inlet and outlet conduits extend through the casing and are topped by pierceable closure caps. A fitting, containing means to connect an eluent supply and an eluate container, is adapted to pierce the closure caps. The lead casing and the fitting are compatibly contoured such that they will fit only if properly aligned with respect to each other

  1. The generation game

    OpenAIRE

    Chatrakul Na Ayudhya, Uracha

    2015-01-01

    Purpose – Explores the limited value of concepts such as Baby-Boomer, Generation X and Generation Y and advances the view that life course is more valuable.\\ud \\ud Design/methodology/approach – Examines how young adults in Britain, born between 1975 and 1982, conceptualized the notion of work-life balance as they were about to leave university and enter full-time paid employment. \\ud \\ud Findings – Reveals that the notion of individual choice strongly underpins young adults’ conceptualization...

  2. ColloInputGenerator

    DEFF Research Database (Denmark)

    2013-01-01

    This is a very simple program to help you put together input files for use in Gries' (2007) R-based collostruction analysis program. It basically puts together a text file with a frequency list of lexemes in the construction and inserts a column where you can add the corpus frequencies. It requires...... it as input for basic collexeme collostructional analysis (Stefanowitsch & Gries 2003) in Gries' (2007) program. ColloInputGenerator is, in its current state, based on programming commands introduced in Gries (2009). Projected updates: Generation of complete work-ready frequency lists....

  3. Generator for ionizing radiation

    International Nuclear Information System (INIS)

    Romanovskij, V.F.; Panasjuk, V.S.; Stepanov, B.M.; Ovtscharov, A.M.; Akimov, J.A.

    1979-01-01

    The X-ray, electron, or neutron generator contains a radiation source with an accelerating tube, whose shell encloses a resonance transformer, a subdivided tube insulator and a high-tension electrode for the accelerating tube. The accelerating tube can be evacuated. The high-tension winding of the resonance transformer lies within the tube insulator of the accelerating tube and the evacuated space between resonance transformer and tube insulator. The generator may be applied in medicine, in geophysical research or for activation analysis of materials. (DG) 891 HP/DG 892 BRE [de

  4. Healthcare waste generation and management practice in government health centers of Addis Ababa, Ethiopia.

    Science.gov (United States)

    Tadesse, Menelik Legesse; Kumie, Abera

    2014-11-25

    Healthcare wastes are hazardous organic and inorganic wastes. The waste disposal management in Addis Ababa city is seen unscientific manner. The waste management practice in the health facilities are poor and need improvement. This study will help different organizations, stakeholders and policy makers to correct and improve the existing situation of healthcare waste legislation and enforcement and training of staff in the healthcare facilities in Addis Ababa. The study aimed to assess the existing generation and management practice of healthcare waste in selected government health centers of Addis Ababa. The cross-sectional study was conducted to quantify waste generation rate and evaluate its management system. The study area was Addis Ababa. The sample size was determined by simple random sampling technique, the sampling procedure involved 10 sub-cities of Addis Ababa. Data were collected using both waste collecting and measuring equipment and check list. The Data was entered by EPI INFO version 6.04d and analyzed by and SPSS for WINDOW version15. The mean (±SD) healthcare waste generation rate was 9.61 ± 3.28 kg/day of which (38%) 3.64 ± 1.45 kg/day was general or non-hazardous waste and (62%) 5.97 ± 2.31 kg/day was hazardous. The mean healthcare waste generation rate between health centers was a significant different with Kurskal-Wallis test (χ2 = 21.83, p-value = 0.009). All health centers used safety boxes for collection of sharp wastes and all health centers used plastic buckets without lid for collection and transportation of healthcare waste. Pre treatment of infectious wastes was not practiced by any of the health centers. All health centers used incinerators and had placenta pit for disposal of pathological waste however only seven out of ten pits had proper covering material. Segregation of wastes at point of generation with appropriate collection materials and pre- treatment of infectious waste before disposal should be practiced

  5. Presença de Staphylococcus spp. produtores de enterotoxinas e da toxina da síndrome do choque tóxico em manipuladores de queijo de cabra Presence of Staphylococcus strains producer of enterotoxins and toxic shock toxin syndrome isolated from goat's cheese handlers

    Directory of Open Access Journals (Sweden)

    L.S. Rapini

    2005-12-01

    Full Text Available Agruparam-se 167 cepas de Staphylococcus, isoladas de diferentes sítios (fossas nasais, orofaringe, palma das mãos e leitos subungueais, de dois manipuladores de queijos de leite de cabra, em pools (45, de acordo com a similaridade da espécie e o local de origem, e testou-se o seu potencial de produção de enterotoxinas (SE A, B, C e D, e da toxina da síndrome do choque tóxico (TSST-1. Constatou-se que 62,2% dos pools foram capazes de produzir, de forma individual ou associada, SEA (33,3%; SEB (46,7%; SEC (8,9%; SED (4,4% e TSST-1 (4,4%. Dos pools enterotoxigênicos, 96,4% corresponderam a espécies coagulase negativa (Staphylococcus epidermidis e Staphylococcus cohnii. A capacidade de produção de SE e de TSST-1 pelas cepas de Staphylococcus spp. isoladas dos manipuladores, além de reafirmar sua importância na transmissão de intoxicações de origem alimentar, enfatiza a necessidade imprescindível da adoção de condutas higiênicas e sanitárias durante a manipulação do alimento.A total of 167 strains of Staphylococcus isolated from nasal cavities, oropharynx, palm of hands and subunguial of two goat's cheese handlers were collected. The strains were pooled (45 according to the species similarity and place of origin and tested for the production of enterotoxins (SE A, B, C, D and toxic shock toxin syndrome (TSST-1. It was observed that 62.2% of the pools presented the capacity to produce, individually or in association, SEA (33.3%; SEB (46.7%; SEC (8.9%; SED (4.4% and TSST-1 (4.4%. From the enterotoxigenic pools, 96.4% corresponded to species negative coagulase (Staphylococcus epidermidis and Staphylococcus cohnii. The capacity to produce SE and TSST-1 by Staphylococcus spp. strains isolated from food handlers reaffirms its hole on the transmission of food poisoning, beyond emphasizing the indispensable necessity of the adoption of satisfactory hygienic and sanitary procedures during the food manufacture.

  6. Compact, diode-pumped, solid-state lasers for next generation defence and security sensors

    Science.gov (United States)

    Silver, M.; Lee, S. T.; Borthwick, A.; McRae, I.; Jackson, D.; Alexander, W.

    2015-06-01

    Low-cost semiconductor laser diode pump sources have made a dramatic impact in sectors such as advanced manufacturing. They are now disrupting other sectors, such as defence and security (D&S), where Thales UK is a manufacturer of sensor systems for application on land, sea, air and man portable. In this talk, we will first give an overview of the market trends and challenges in the D&S sector. Then we will illustrate how low cost pump diodes are enabling new directions in D&S sensors, by describing two diode pumped, solid- state laser products currently under development at Thales UK. The first is a new generation of Laser Target Designators (LTD) that are used to identify targets for the secure guiding of munitions. Current systems are bulky, expensive and require large battery packs to operate. The advent of low cost diode technology, merged with our novel solid-state laser design, has created a designator that will be the smallest, lowest cost, STANAG compatible laser designator on the market. The LTD delivers greater that 50mJ per pulse up to 20Hz, and has compact dimensions of 125×70×55mm. Secondly, we describe an ultra-compact, eye-safe, solid-state laser rangefinder (LRF) with reduced size, weight and power consumption compared to existing products. The LRF measures 100×55×34mm, weighs 200g, and can range to greater than 10km with a single laser shot and at a reprate of 1Hz. This also leverages off advances in laser pump diodes, but also utilises low cost, high reliability, packaging technology commonly found in the telecoms sector. As is common in the D&S sector, the products are designed to work in extreme environments, such as wide temperature range (-40 to +71°C) and high levels of shock and vibration. These disruptive products enable next- generation laser sensors such as rangefinders, target designators and active illuminated imagers.

  7. Hera presentation generator (Poster)

    NARCIS (Netherlands)

    Frasincar, F.; Houben, G.J.P.M.; Barna, P.; Ellis, A.; Hagino, T.

    2005-01-01

    Semantic Web Information Systems (SWIS) are Web Information Systems that use Semantic Web technologies. Hera is a model-driven design methodology for SWIS. In Hera, models are represented in RDFS and model instances in RDF. The Hera Presentation Generator (HPG) is an integrated development

  8. Tredje generations coaching

    DEFF Research Database (Denmark)

    Stelter, Reinhard

    2012-01-01

    ”Tredje generations coaching” udfolder et nyt univers for coaching og coachingpsykologi gennem en bearbejdelse af aktuel samfundsforskning, nye læringsteorier og diskurser om det personlige lederskab. ”Tredje generations coaching” er funderet på en samfundsmæssig forståelse af coaching. Coaching er...... blevet så betydningsfuld, fordi samfundet opleves som uoverskueligt og hyperkomplekst. Viden skal nu udformes og anvendes i specifikke kontekster og situationer, og både i privatliv og i det offentlige rum skal vi lære at forhandle os til rette. Coaching kan hjælpe os til at skabe ny viden og mestre...... sociale forhandlinger. Coaching er dermed en slags fødselshjælp til nye refleksioner og perspektiver, en hjælp til selvhjælp og en støtte til ens egen selvdannelsesproces. ”Tredje generations coaching” fremhæver coach og coachee i deres narrativ-samskabende partnerskab. Til forskel fra første generations...

  9. CONFIGURATION GENERATOR MODEL

    International Nuclear Information System (INIS)

    Alsaed, A.

    2004-01-01

    ''The Disposal Criticality Analysis Methodology Topical Report'' prescribes an approach to the methodology for performing postclosure criticality analyses within the monitored geologic repository at Yucca Mountain, Nevada. An essential component of the methodology is the ''Configuration Generator Model for In-Package Criticality'' that provides a tool to evaluate the probabilities of degraded configurations achieving a critical state. The configuration generator model is a risk-informed, performance-based process for evaluating the criticality potential of degraded configurations in the monitored geologic repository. The method uses event tree methods to define configuration classes derived from criticality scenarios and to identify configuration class characteristics (parameters, ranges, etc.). The probabilities of achieving the various configuration classes are derived in part from probability density functions for degradation parameters. The NRC has issued ''Safety Evaluation Report for Disposal Criticality Analysis Methodology Topical Report, Revision 0''. That report contained 28 open items that required resolution through additional documentation. Of the 28 open items, numbers 5, 6, 9, 10, 18, and 19 were concerned with a previously proposed software approach to the configuration generator methodology and, in particular, the k eff regression analysis associated with the methodology. However, the use of a k eff regression analysis is not part of the current configuration generator methodology and, thus, the referenced open items are no longer considered applicable and will not be further addressed

  10. Nuclear power generation

    International Nuclear Information System (INIS)

    Hirao, Katumi; Sato, Akira; Kaimori, Kimihiro; Kumano, Tetsuji

    2001-01-01

    Nuclear power generation for commercial use in Japan has passed 35 years since beginning of operation in the Tokai Nuclear Power Station in 1966, and has 51 machines of reactor and about 44.92 MW of total output of equipment scale in the 21st century. However, an environment around nuclear energy becomes severer at present, and then so many subjects to be overcome are remained such as increased unreliability of the public on nuclear energy at a chance of critical accident of the JCO uranium processing facility, delay of pull-thermal plan, requirement for power generation cost down against liberalization of electric power, highly aging countermeasure of power plant begun its operation as its Genesis, and so on. Under such conditions, in order that nuclear power generation in Japan survives as one of basic electric source in future, it is necessary not only to pursue safety and reliability of the plant reliable to the public, but also to intend to upgrade its operation and maintenance by positively adopting good examples on operational management method on abroad and to endeavor further upgrading of application ratio of equipments and reduction of generation cost. Here were outlined on operation conditions of nuclear power stations in Japan, and introduced on upgrading of their operational management and maintenance management. (G.K.)

  11. Large hydropower generating units

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    This document presents the Brazilian experience with the design, fabrication, construction, commissioning and operation of large scale and generation capacity unities. The experience had been acquired with the implementation of Itumbiara, Paulo Afonso IV, Tucurui, Itaipu and Xingo power plants, which are among the largest world unities.

  12. Generating a scalar logic

    DEFF Research Database (Denmark)

    Ramsgaard Thomsen, Mette; Tamke, Martin

    2011-01-01

    This paper presents the design project "it's a SMALL world", an exhibition design developed for the Danish Design Centre in 2009. The project investigates the making of a generative design environment by which multiple design parameters as from program, site or the subsequent digital fabrication ...

  13. Dynamical generation of flavour

    Indian Academy of Sciences (India)

    Introduction of family symmetry and generation of flavour structure by Yukawa couplings arising as vacuum expectation values (VEVs) of 'spurion' fields offers an attractive alternative prospect for understanding flavour structure [1]. Model builders have considered various. Pramana – J. Phys., Vol. 86, No. 2, February 2016.

  14. Next Generation Inverter

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Zilai [General Motors LLC, Detroit, MI (United States); Gough, Charles [General Motors LLC, Detroit, MI (United States)

    2016-04-22

    The goal of this Cooperative Agreement was the development of a Next Generation Inverter for General Motors’ electrified vehicles, including battery electric vehicles, range extended electric vehicles, plug-in hybrid electric vehicles and hybrid electric vehicles. The inverter is a critical electronics component that converts battery power (DC) to and from the electric power for the motor (AC).

  15. Risks of power generation

    International Nuclear Information System (INIS)

    Mostert, P.

    1981-01-01

    A comparison is made between the various ways of power generation in the Netherlands and the hazards attached to them. Tables are presented of fuels used, the quantities used per annum and in the course of the last 20 years, accidents and pollution types and percentages, as well as the toxicity and waste disposal risks. (Auth.)

  16. Next generation of accelerators

    International Nuclear Information System (INIS)

    Richter, B.

    1979-01-01

    Existing high-energy accelerators are reviewed, along with those under construction or being designed. Finally, some of the physics issues which go into setting machine parameters, and some of the features of the design of next generation electron and proton machines are discussed

  17. Leading Generation Y

    Science.gov (United States)

    Coley, David C.

    2009-01-01

    School administrators are facing the perfect storm: a growing number of baby boomers retiring each year, an absence of experienced teachers to take their place, and high turnover among young teachers. The need to hire and retain a new generation of teachers is one of the biggest challenges facing school administrators. To fill these vacancies,…

  18. Loser Generated Content

    DEFF Research Database (Denmark)

    Petersen, Søren Mørk

    2008-01-01

    In this article [ 1 ] some of the critical aspects of Web 2.0 are mapped in relation to labor and the production of user generated content. For many years the Internet was considered an apt technology for subversion of capitalism by the Italian post–Marxists. What we have witnessed, however...

  19. Dynalight Next Generation

    DEFF Research Database (Denmark)

    Jørgensen, Bo Nørregaard; Ottosen, Carl-Otto; Dam-Hansen, Carsten

    2016-01-01

    The project aims to develop the next generation of energy cost-efficient artificial lighting control that enables greenhouse growers to adapt their use of artificial lighting dynamically to fluctuations in the price of electricity. This is a necessity as fluctuations in the price of electricity c...

  20. Next Generation Social Networks

    DEFF Research Database (Denmark)

    Sørensen, Lene Tolstrup; Skouby, Knud Erik

    2008-01-01

    different online networks for communities of people who share interests or individuals who presents themselves through user produced content is what makes up the social networking of today. The purpose of this paper is to discuss perceived user requirements to the next generation social networks. The paper...

  1. Point Lepreau generating station

    International Nuclear Information System (INIS)

    Ganong, G.H.D.; Strang, A.E.; Gunter, G.E.; Thompson, T.S.

    Point Lepreau-1 reactor is a 600 MWe generating station expected to be in service by October 1979. New Brunswick is suffering a 'catch up' phenomenon in load growth and needs to decrease dependence on foreign oil. The site is on salt water and extensive study has gone into corrosion control. Project management, financing and scheduling have unique aspects. (E.C.B.)

  2. Aircraft Oxygen Generation

    Science.gov (United States)

    2012-02-01

    An Oxygen Enriched Air System for the AV-8A Harrier (NADC-81198-60).” 70 Horch , T., et. al. “The F-16 Onboard Oxygen Generating System: Performance...Only and Safety Privileged). Horch , T., Miller, R., Bomar, J., Tedor, J., Holden, R., Ikels, K., & Lozano, P. (1983). The F-16 Onboard Oxygen

  3. Variable speed generators

    CERN Document Server

    Boldea, Ion

    2005-01-01

    With the deregulation of electrical energy production and distribution, says Boldea (Polytechnical Institute, Timisoara, Romania) producers are looking for ways to tailor their electricity for different markets. Variable-speed electric generators are serving that purpose, up to the 400 megavolt ampere unit size, in Japan since 1996 and Germany sinc

  4. Image scaling curve generation

    NARCIS (Netherlands)

    2012-01-01

    The present invention relates to a method of generating an image scaling curve, where local saliency is detected in a received image. The detected local saliency is then accumulated in the first direction. A final scaling curve is derived from the detected local saliency and the image is then

  5. Image scaling curve generation.

    NARCIS (Netherlands)

    2011-01-01

    The present invention relates to a method of generating an image scaling curve, where local saliency is detected in a received image. The detected local saliency is then accumulated in the first direction. A final scaling curve is derived from the detected local saliency and the image is then

  6. MEMS Solar Generators

    OpenAIRE

    Grbovic, Dragoslav; Osswald, Sebastian

    2011-01-01

    Approved for public release; distribution is unlimited Using MEMS bimaterial structures to build highly efficient solar energy generators. This is a novel approach that utilizes developments in the area of bimaterial sensors and applies them in the field of solar energy harvesting.

  7. Pulsed neutron generator

    International Nuclear Information System (INIS)

    Bespalov, D.F.; Bykovskii, Yu.A.; Vergun, I.I.; Kozlovskii, K.I.; Kozyrev, Yu.P.; Leonov, R.K.; Simagin, B.I.; Tsybin, A.S.; Shikanov, A.Ie.

    1986-03-01

    The paper describes a new device for generating pulsed neutron fields, utilized in nuclear geophysics for carrying out pulsed neutron logging and activation analysis under field conditions. The invention employs a sealed-off neutron tube with a laser ion source which increases neutron yield to the level of 10 neutrons per second or higher. 2 refs., 1 fig

  8. Steam generators and furnaces

    Energy Technology Data Exchange (ETDEWEB)

    Swoboda, E

    1978-04-01

    The documents published in 1977 in the field of steam generators for conventional thermal power plants are classified according to the following subjects: power industry and number of power plants, planning and operation, design and construction, furnaces, environmental effects, dirt accumulation and corrosion, conservation and scouring, control and automation, fundamental research, and materials.

  9. Future generations in democracy

    DEFF Research Database (Denmark)

    Jensen, Karsten Klint

    2015-01-01

    of future generations. The analysis reveals that they tend to overlook the democratic costs of such representation (violation of political equality, risk of distortion of the deliberation and undermining of autonomy), while they seem to ignore the alternative of giving consideration to the interests...

  10. Energy generation device

    International Nuclear Information System (INIS)

    Araki, Takashi; Tatsumi, Masami; Tada, Koji.

    1990-01-01

    In a reaction estimated as nuclear fusion, a portion near of electrode is heated locally to a high temperature by the heat of the reaction generated on the electrode, by which the electrode is melted or heavy water is boiled. Then, Continuous reaction is difficult and not practical. In view of the above, a cathode made of deuterium absorbing materials is put into heavy water and electric current is supplied, to continuously take place the reaction and an anode is disposed in a cylindrical cathode to cause reaction of energy generation therein in order to continuously take out the generated energy to the outside safely. Further, heavy water is circulated inside the cylindrical cathode to externally take out heavy water the temperature of which is elevated by the generated energy, and fresh heavy water is supplied to the inside of the cylindrical cathode. Thus, heavy water does not boil on the electrode, temperature elevation can be suppressed and melting of the electrode itself can be prevented. (N.H.)

  11. Mentorship: A Generational Perspective

    Science.gov (United States)

    Shadle, Eric

    2016-01-01

    Three major generations are represented in today's workforce: Baby Boomers, Gen X, and Millennials. Each of these groups has a wide range of definitions, but here they are defined according to their most common definitions: Baby boomers include those born in the decade following the end of World War II and are between the ages of 50 and 70 years.…

  12. High Voltage Seismic Generator

    Science.gov (United States)

    Bogacz, Adrian; Pala, Damian; Knafel, Marcin

    2015-04-01

    This contribution describes the preliminary result of annual cooperation of three student research groups from AGH UST in Krakow, Poland. The aim of this cooperation was to develop and construct a high voltage seismic wave generator. Constructed device uses a high-energy electrical discharge to generate seismic wave in ground. This type of device can be applied in several different methods of seismic measurement, but because of its limited power it is mainly dedicated for engineering geophysics. The source operates on a basic physical principles. The energy is stored in capacitor bank, which is charged by two stage low to high voltage converter. Stored energy is then released in very short time through high voltage thyristor in spark gap. The whole appliance is powered from li-ion battery and controlled by ATmega microcontroller. It is possible to construct larger and more powerful device. In this contribution the structure of device with technical specifications is resented. As a part of the investigation the prototype was built and series of experiments conducted. System parameter was measured, on this basis specification of elements for the final device were chosen. First stage of the project was successful. It was possible to efficiently generate seismic waves with constructed device. Then the field test was conducted. Spark gap wasplaced in shallowborehole(0.5 m) filled with salt water. Geophones were placed on the ground in straight line. The comparison of signal registered with hammer source and sparker source was made. The results of the test measurements are presented and discussed. Analysis of the collected data shows that characteristic of generated seismic signal is very promising, thus confirms possibility of practical application of the new high voltage generator. The biggest advantage of presented device after signal characteristics is its size which is 0.5 x 0.25 x 0.2 m and weight approximately 7 kg. This features with small li-ion battery makes

  13. Event-Driven Technology to Generate Relevant Collections of Near-Realtime Data

    Science.gov (United States)

    Graves, S. J.; Keiser, K.; Nair, U. S.; Beck, J. M.; Ebersole, S.

    2017-12-01

    Getting the right data when it is needed continues to be a challenge for researchers and decision makers. Event-Driven Data Delivery (ED3), funded by the NASA Applied Science program, is a technology that allows researchers and decision makers to pre-plan what data, information and processes they need to have collected or executed in response to future events. The Information Technology and Systems Center at the University of Alabama in Huntsville (UAH) has developed the ED3 framework in collaboration with atmospheric scientists at UAH, scientists at the Geological Survey of Alabama, and other federal, state and local stakeholders to meet the data preparedness needs for research, decisions and situational awareness. The ED3 framework supports an API that supports the addition of loosely-coupled, distributed event handlers and data processes. This approach allows the easy addition of new events and data processes so the system can scale to support virtually any type of event or data process. Using ED3's underlying services, applications have been developed that monitor for alerts of registered event types and automatically triggers subscriptions that match new events, providing users with a living "album" of results that can continued to be curated as more information for an event becomes available. This capability can allow users to improve capacity for the collection, creation and use of data and real-time processes (data access, model execution, product generation, sensor tasking, social media filtering, etc), in response to disaster (and other) events by preparing in advance for data and information needs for future events. This presentation will provide an update on the ED3 developments and deployments, and further explain the applicability for utilizing near-realtime data in hazards research, response and situational awareness.

  14. GASIFICATION FOR DISTRIBUTED GENERATION

    Energy Technology Data Exchange (ETDEWEB)

    Ronald C. Timpe; Michael D. Mann; Darren D. Schmidt

    2000-05-01

    A recent emphasis in gasification technology development has been directed toward reduced-scale gasifier systems for distributed generation at remote sites. The domestic distributed power generation market over the next decade is expected to be 5-6 gigawatts per year. The global increase is expected at 20 gigawatts over the next decade. The economics of gasification for distributed power generation are significantly improved when fuel transport is minimized. Until recently, gasification technology has been synonymous with coal conversion. Presently, however, interest centers on providing clean-burning fuel to remote sites that are not necessarily near coal supplies but have sufficient alternative carbonaceous material to feed a small gasifier. Gasifiers up to 50 MW are of current interest, with emphasis on those of 5-MW generating capacity. Internal combustion engines offer a more robust system for utilizing the fuel gas, while fuel cells and microturbines offer higher electric conversion efficiencies. The initial focus of this multiyear effort was on internal combustion engines and microturbines as more realistic near-term options for distributed generation. In this project, we studied emerging gasification technologies that can provide gas from regionally available feedstock as fuel to power generators under 30 MW in a distributed generation setting. Larger-scale gasification, primarily coal-fed, has been used commercially for more than 50 years to produce clean synthesis gas for the refining, chemical, and power industries. Commercial-scale gasification activities are under way at 113 sites in 22 countries in North and South America, Europe, Asia, Africa, and Australia, according to the Gasification Technologies Council. Gasification studies were carried out on alfalfa, black liquor (a high-sodium waste from the pulp industry), cow manure, and willow on the laboratory scale and on alfalfa, black liquor, and willow on the bench scale. Initial parametric tests

  15. Pulsed current generator

    International Nuclear Information System (INIS)

    Semenov, V.D.; Furman, Eh.G.

    1974-01-01

    The paper describes a current pulse generator with an auxiliary network consisting of a choke and diode in series designed to enlarge the range of pulse frequency control. One output of the network is connected to an adjustable valve cathode and via antoher auxiliary condenser to the point where the cathode of the main key unit is joined to the start of the magnetizing coil. A second output is connected to the anode of another adjustable valve and via another auxiliary condenser to the point where the anode of the other main key unit is joined to the end of the magnetizing coil. The generator can be used to excite the electromagnets of charged particle accelerators or in devices designed to produce magnetic fields. (author)

  16. Why three generations?

    Directory of Open Access Journals (Sweden)

    Masahiro Ibe

    2016-07-01

    Full Text Available We discuss an anthropic explanation of why there exist three generations of fermions. If one assumes that the right-handed neutrino sector is responsible for both the matter–antimatter asymmetry and the dark matter, then anthropic selection favors three or more families of fermions. For successful leptogenesis, at least two right-handed neutrinos are needed, while the third right-handed neutrino is invoked to play the role of dark matter. The number of the right-handed neutrinos is tied to the number of generations by the anomaly constraints of the U(1B−L gauge symmetry. Combining anthropic arguments with observational constraints, we obtain predictions for the X-ray observations, as well as for neutrinoless double-beta decay.

  17. Second harmonic generation imaging

    CERN Document Server

    2013-01-01

    Second-harmonic generation (SHG) microscopy has shown great promise for imaging live cells and tissues, with applications in basic science, medical research, and tissue engineering. Second Harmonic Generation Imaging offers a complete guide to this optical modality, from basic principles, instrumentation, methods, and image analysis to biomedical applications. The book features contributions by experts in second-harmonic imaging, including many pioneering researchers in the field. Written for researchers at all levels, it takes an in-depth look at the current state of the art and possibilities of SHG microscopy. Organized into three sections, the book: Provides an introduction to the physics of the process, step-by-step instructions on how to build an SHG microscope, and comparisons with related imaging techniques Gives an overview of the capabilities of SHG microscopy for imaging tissues and cells—including cell membranes, muscle, collagen in tissues, and microtubules in live cells—by summarizing experi...

  18. Choice probability generating functions

    DEFF Research Database (Denmark)

    Fosgerau, Mogens; McFadden, Daniel; Bierlaire, Michel

    2010-01-01

    This paper establishes that every random utility discrete choice model (RUM) has a representation that can be characterized by a choice-probability generating function (CPGF) with specific properties, and that every function with these specific properties is consistent with a RUM. The choice...... probabilities from the RUM are obtained from the gradient of the CPGF. Mixtures of RUM are characterized by logarithmic mixtures of their associated CPGF. The paper relates CPGF to multivariate extreme value distributions, and reviews and extends methods for constructing generating functions for applications....... The choice probabilities of any ARUM may be approximated by a cross-nested logit model. The results for ARUM are extended to competing risk survival models....

  19. High energy neutron generator

    International Nuclear Information System (INIS)

    Barjon, R.; Breynat, G.

    1987-01-01

    This patent describes a generator of fast neutrons only slightly contaminated by neutrons of energy less than 15 MeV, comprising a source of charged particles of energy equal to at least 15 MeV, a target made of lithium deuteride, and means for cooling the target. The target comprises at least two elements placed in series in the path of the charged particles and separated from each other, the thickness of each of the elements being selected as a function of the average energy of the charged particles emitted from the source and the energy of the fast neutrons to be generated such that neutrons of energy equal to at least 15 MeV are emitted in the forward direction in response to the bombardment of the target from behind by the charged particles. The target cooling means comprises means for circulating between and around the elements a gas which does not chemically react with lithium deuteride

  20. The intense neutron generator

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, W B

    1966-07-01

    The presentation discusses both the economic and research contexts that would be served by producing neutrons in gram quantities at high intensities by electrical means without uranium-235. The revenue from producing radioisotopes is attractive. The array of techniques introduced by the multipurpose 65 megawatt Intense Neutron Generator project includes liquid metal cooling, superconducting magnets for beam bending and focussing, super-conductors for low-loss high-power radiofrequency systems, efficient devices for producing radiofrequency power, plasma physics developments for producing and accelerating hydrogen, ions at high intensity that are still far out from established practice, a multimegawatt high voltage D.C. generating machine that could have several applications. The research fields served relate principally to materials science through neutron-phonon and other quantum interactions as well as through neutron diffraction. Nuclear physics is served through {mu}-, {pi}- and K-meson production. Isotope production enters many fields of applied research. (author)